summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2012-11-19NFC: Queue a copy of the transmitted LLCP skbSamuel Ortiz
Drivers are allowed to modify the sent skb and thus we need to make a copy of it before passing it to the driver. Without this fix, LLCP Tx skbs were not queued properly as the ptype check was failing due to e.g. the pn533 driver skb_pushing the Tx skb. Reported-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Stop sending LLCP frames when tx queues are getting too deepSamuel Ortiz
When the tx pending queues and/or the socket tx queue is getting too deep, we have to let userspace know. We won't be queueing any more frames until the congestion is fixed. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Copy user space buffer when sending UI framesSamuel Ortiz
Using the userspace IO vector directly is wrong, we should copy it from user space first. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Export nfc_hci_sak_to_protocol()Eric Lapuyade
Some HCI drivers will need it. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Export nfc_hci_result_to_errno as it can be needed by HCI driversEric Lapuyade
Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Dot not dispatch HCI event received on unopened pipeEric Lapuyade
A chip with pre-opened gates may send events on a gate that nobody has opened in the handset host. Discard those events. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Ignore err when chip doesn't implement HW/SW info registersEric Lapuyade
NFC_HCI_ID_MGMT_VERSION_SW and NFC_HCI_ID_MGMT_VERSION_HW are optional registers for gate NFC_HCI_ID_MGMT_GATE in standard HCI. When chip doesn't implement, just leave all the information as zeros. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-19NFC: Fix hci_connect_gate() when a pre-opened pipe is passedEric Lapuyade
In some cases, pre-opened pipes don't stay open when a clear all pipes command is sent. They stay created however. Therefore, one can never assume that such a pipe is already open. As re-opening a pipe seems not to be a problem, we do that now. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-11-16lib80211: hide Kconfig symbolJohannes Berg
There's no need to ask the user about lib80211 since it will be selected by drivers requiring it, hide it from Kconfig. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-11-14Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2012-11-09mac80211: reassign channel contexts before stationsJohannes Berg
Since channel contexts are usually present before stations can be added to an interface, reassign before stations them in reconfiguration as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09mac80211: clarify interface iteration and make it configurableJohannes Berg
During hardware restart, all interfaces are iterated even though they haven't been re-added to the driver, document this behaviour. The same also happens during resume, which is even more confusing since all of the interfaces were previously removed from the driver. Make this optional so drivers relying on the current behaviour can still use it, but to let drivers that don't want this behaviour disable it. Also convert all API users, keeping the old semantics except in hwsim, where the new normal ones are desired. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09mac80211: call driver method when restart completesJohannes Berg
When the driver requests a restart (reconfiguration) it gets all the normal method calls, but can't really tell why they're happening. Call a new restart_complete op in the driver when the restart completes, so it could keep its own state about the restart and clear it there. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09mac80211: remove unused tracepointJohannes Berg
Clearly the tracepoint drv_offchannel_tx was forgotten when that functionality was removed, remove it now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-09mac80211: add debugfs file for HW queuesJohannes Berg
Add a debugfs file showing which HW queues were allocated to a virtual interface, including the CAB queue for AP interfaces. Change-Id: I486924e961b6ad6785a79db09620919ee644e703 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07mac80211: fix TX error pathJohannes Berg
One error path in ieee80211_subif_start_xmit() will double-free the SKB. Set it to NULL to prevent that. This issue was introduced by my channel context changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07mac80211: include export.h in aes_cmacEmmanuel Grumbach
This is needed since this file exports functions. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07mac80211: use kstrtoull return valueJohannes Berg
If kstrtoull() returns an error code (a value smaller than zero), use it since it can be an error other than -EINVAL. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07mac80211: fix race in TKIP MIC test debugfs fileJohannes Berg
Accessing sdata->vif.bss_conf.bssid without any protection here is racy, use u.mgd.associated instead and lock the correct mutex for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07mac80211: use mac_ptonJohannes Berg
Instead of implementing practically the same function (hwaddr_aton) use mac_pton. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07nl80211: send the NL80211_ATTR_SSID in nl80211_send_iface()Antonio Quartulli
The userspace may want to know what is the current ssid that a given interface is using. This patch enables nl80211 to send the NL80211_ATTR_SSID attribute in nl80211_send_iface(). Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-07cfg80211: store the ssid into wirless_dev in AP modeAntonio Quartulli
Store the configured ssid in wdev->ssid when starting an AP Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-06mac80211: pass P2P powersave parameters to driverJohannes Berg
While connected to a GO, parse the P2P NoA attribute and pass the CT Window and opportunistic powersave parameters to the driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-06wireless: add utility function to get P2P attributeJohannes Berg
Parsing the P2P attributes can be tricky as their contents can be split across multiple (vendor) IEs. Thus, it's not possible to parse them like IEs (by returning a pointer to the data.) Instead, provide a function that copies the attribute data into a caller-provided buffer and returns the size needed (useful in case the buffer was too small.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05cfg80211: allow registering more than one beacon listenerBen Greear
The commit: commit 5e760230e42cf759bd923457ca2753aacf2e656e Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Nov 4 11:18:17 2011 +0100 cfg80211: allow registering to beacons allowed only a single process to register for beacon events per wiphy. This breaks cases where a user may want two or more VIFs on a wiphy and run a seperate hostapd process on each vif. This patch allows multiple beacon listeners, fixing the regression. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05mac80211: implement set_mcast_rate() callbackAntonio Quartulli
This new callback can be used to tune the rate to be used to send multicast frames. In the current state the multicast rate can be specified on IBSS/MESH joining only. This makes it impossible to select a custom multicast rate when then join command is sent by an external program (e.g. wpa_supplicant) Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05nl/cfg80211: add the NL80211_CMD_SET_MCAST_RATE commandAntonio Quartulli
This command triggers a new callback: set_mcast_rate(). It enables the user to change the rate used to send multicast frames for vif configured as IBSS or MESH_POINT Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-05mac80211: send deauth only with channel contextJohannes Berg
When userspace asks to deauthenticate and we're just authenticated (or still authenticating) send a deauth frame instead of deleting the auth request. On the other hand, if we've just disassociated and therefore deleted all our state already, drop the deauth request because we no longer have a channel context to send it on. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-01Bluetooth: Rename ctrl_id to remote_amp_idAndrei Emeltchenko
Since we have started to use local_amp_id for local AMP Controller Id it makes sense to rename ctrl_id to remote_amp_id since it represents remote AMP controller Id. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Process Create Chan RequestAndrei Emeltchenko
Add processing L2CAP Create Chan Request. When channel is created save associated high speed link hs_hcon. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Use l2cap_physical_cfm in phylink complete evtAndrei Emeltchenko
When receiving HCI Phylink Complete event run amp_physical_cfm which initialize BR/EDR L2CAP channel associated with High Speed link and run l2cap_physical_cfm which shall send L2CAP Create Chan Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Check for hs_hcon instead of ctrl_idAndrei Emeltchenko
When deciding whether to send EFS configuration response with success, check rather for existence of High Speed physical link hs_hcon then ctrl_id. There might be cases when there is ctrl_id but high speed link is not established yet. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Disconnect logical link when deleting chanAndrei Emeltchenko
Disconnect logical link for high speed channel hs_hchan associated with L2CAP channel chan. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Remove hci_conn receiving error command statusAndrei Emeltchenko
When receiving HCI Event: Command Status for Create Physical Link with Error code remove AMP hcon. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Process Disc Physical Link Complete evtAndrei Emeltchenko
Add processing for HCI Disconnection Physical Link Complete Event. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Process Disc Logical LinkAndrei Emeltchenko
Add processing for HCI Disconnection Logical Link Complete Event. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Add Logical Link Create functionAndrei Emeltchenko
After physical link is created logical link needs to be created. The process starts after L2CAP channel is created and L2CAP Configuration Response with result PENDING is received. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Derive remote and local amp id from chan structAndrei Emeltchenko
l2cap_chan already keeps information about *_amp_id. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Return correct L2CAP response typeAndrei Emeltchenko
Return L2CAP_CREATE_CHAN_RSP for Create Channel Request and L2CAP_CONN_RSP for Create Connection Request. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Save hs_hchan instead of hs_hcon in loglink completeAndrei Emeltchenko
When logical link creation is completed we need to save hs_hchan which represents logical link instead of hs_hcon representing physical link. hs_hcon shall be saved when receiving physical link complete event. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: trivial: Fix braces style and remove empty lineAndrei Emeltchenko
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: mgmt: Use __constant when dealing with constantsSyam Sidhardhan
__constant_cpu_to_le*() is the right go here. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Remove unnecessary include export.hSyam Sidhardhan
For files only using THIS_MODULE and/or EXPORT_SYMBOL, map them onto including export.h -- or if the file isn't even using those, then just delete the include. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Add put(hcon) when deleting hchanAndrei Emeltchenko
When refcnt reaches zero disconnect timeout will run and hci_conn will be disconnected. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Process Logical Link complete evtAndrei Emeltchenko
After receiving HCI Logical Link Complete event finish EFS configuration by sending L2CAP Conf Response with success code. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: AMP: Process Physical Link Complete evtAndrei Emeltchenko
Add processing for HCI Physical Link Complete event. Upon successful status received start L2CAP create channel process. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Use helper function sending EFS conf rspAndrei Emeltchenko
There is helper function used to send EFS Configuration Response. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: trivial: Remove unneeded assignmentAndrei Emeltchenko
Assignment is not needed here since err is always gets value. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-11-01Bluetooth: Fix sending unnecessary HCI_LE_Host_EnableJohan Hedberg
This patch fixes sending an unnecessary HCI_LE_Host_Enable command if the command has already been sent as part of the default HCI init sequence. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit v1.2.3 (git 2.0.4) at 2025-02-05 01:56:31 +0000