summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2015-10-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2015-10-30 1) The flow cache is limited by the flow cache limit which depends on the number of cpus and the xfrm garbage collector threshold which is independent of the number of cpus. This leads to the fact that on systems with more than 16 cpus we hit the xfrm garbage collector limit and refuse new allocations, so new flows are dropped. On systems with 16 or less cpus, we hit the flowcache limit. In this case, we shrink the flow cache instead of refusing new flows. We increase the xfrm garbage collector threshold to INT_MAX to get the same behaviour, independent of the number of cpus. 2) Fix some unaligned accesses on sparc systems. From Sowmini Varadhan. 3) Fix some header checks in _decode_session4. We may call pskb_may_pull with a negative value converted to unsigened int from pskb_may_pull. This can lead to incorrect policy lookups. We fix this by a check of the data pointer position before we call pskb_may_pull. 4) Reload skb header pointers after calling pskb_may_pull in _decode_session4 as this may change the pointers into the packet. 5) Add a missing statistic counter on inner mode errors. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30switchdev: fix: pass correct obj size when deferring obj addScott Feldman
Fixes: 4d429c5dd ("switchdev: introduce possibility to defer obj_add/del") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30switchdev: fix: erasing too much of vlan obj when handling multiple vlan specsScott Feldman
When adding vlans with multiple IFLA_BRIDGE_VLAN_INFO attrs set in AFSPEC, we would wipe the vlan obj struct after the first IFLA_BRIDGE_VLAN_INFO. Fix this by only clearing what's necessary on each IFLA_BRIDGE_VLAN_INFO iteration. Fixes: 9e8f4a54 ("switchdev: push object ID back to object structure") Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30Merge tag 'nfc-next-4.4-2' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC 4.4 pull request This is the NFC pull request for 4.4. It's a bit bigger than usual, the 3 main culprits being: - A new driver for Intel's Fields Peak NCI chipset. In order to support this chipset we had to export a few NCI routines and extend the driver NCI ops to not only support proprietary commands but also core ones. - Support for vendor commands for both STM drivers, st-nci and st21nfca. Those vendor commands allow to run factory tests through the NFC netlink interface. - New i2c and SPI support for the Marvell driver, together with firmware download support for this driver's core. Besides that we also have: - A few file renames in the STM drivers, to keep the naming consistent between drivers. - Some improvements and fixes on the NCI HCI layer, mostly to properly reach a secure element over a legacy HCI link. - A few fixes for the s3fwrn5 and trf7970a drivers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-10-28 Here are a some more Bluetooth patches for 4.4 which collected up during the past week. The most important ones are from Kuba Pawlak for fixing locking issues with SCO sockets. There's also a fix from Alexander Aring for 6lowpan, a memleak fix from Julia Lawall for the btmrvl driver and some cleanup patches from Marcel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30ipv6: recreate ipv6 link-local addresses when increasing MTU over IPV6_MIN_MTUAlexander Duyck
This change makes it so that we reinitialize the interface if the MTU is increased back above IPV6_MIN_MTU and the interface is up. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30switchdev: Add support for flood controlIdo Schimmel
Allow devices supporting this feature to control the flooding of unknown unicast traffic, by making switchdev infrastructure propagate this setting to the switch driver. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-30bridge: set is_local and is_static before fdb entry is added to the fdb ↵Roopa Prabhu
hashtable Problem Description: We can add fdbs pointing to the bridge with NULL ->dst but that has a few race conditions because br_fdb_insert() is used which first creates the fdb and then, after the fdb has been published/linked, sets "is_local" to 1 and in that time frame if a packet arrives for that fdb it may see it as non-local and either do a NULL ptr dereference in br_forward() or attach the fdb to the port where it arrived, and later br_fdb_insert() will make it local thus getting a wrong fdb entry. Call chain br_handle_frame_finish() -> br_forward(): But in br_handle_frame_finish() in order to call br_forward() the dst should not be local i.e. skb != NULL, whenever the dst is found to be local skb is set to NULL so we can't forward it, and here comes the problem since it's running only with RCU when forwarding packets it can see the entry before "is_local" is set to 1 and actually try to dereference NULL. The main issue is that if someone sends a packet to the switch while it's adding the entry which points to the bridge device, it may dereference NULL ptr. This is needed now after we can add fdbs pointing to the bridge. This poses a problem for br_fdb_update() as well, while someone's adding a bridge fdb, but before it has is_local == 1, it might get moved to a port if it comes as a source mac and then it may get its "is_local" set to 1 This patch changes fdb_create to take is_local and is_static as arguments to set these values in the fdb entry before it is added to the hash. Also adds null check for port in br_forward. Fixes: 3741873b4f73 ("bridge: allow adding of fdb entries pointing to the bridge device") Reported-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28NFC: nci: non-static functions can not be inlineRobert Dolca
This fixes a build error that seems to be toochain dependent (Not seen with gcc v5.1): In file included from net/nfc/nci/rsp.c:36:0: net/nfc/nci/rsp.c: In function ‘nci_rsp_packet’: include/net/nfc/nci_core.h:355:12: error: inlining failed in call to always_inline ‘nci_prop_rsp_packet’: function body not available inline int nci_prop_rsp_packet(struct nci_dev *ndev, __u16 opcode, Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27mpls: reduce memory usage of routesRobert Shearman
Nexthops for MPLS routes have a via address field sized for the largest via address that is expected, which is 32 bytes. This means that in the most common case of having ipv4 via addresses, 28 bytes of memory more than required are used per nexthop. In the other common case of an ipv6 nexthop then 16 bytes more than required are used. With large numbers of MPLS routes this extra memory usage could start to become significant. To avoid allocating memory for a maximum length via address when not all of it is required and to allow for ease of iterating over nexthops, then the via addresses are changed to be stored in the same memory block as the route and nexthops, but in an array after the end of the array of nexthops. New accessors are provided to retrieve a pointer to the via address. To allow for O(1) access without having to store a pointer or offset per nh, the via address for each nexthop is sized according to the maximum via address for any nexthop in the route, which is stored in a new route field, rt_max_alen, but this is in an existing hole in struct mpls_route so it doesn't increase the size of the structure. Each via address is ensured to be aligned to VIA_ALEN_ALIGN to account for architectures that don't allow unaligned accesses. Signed-off-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27mpls: fix forwarding using v4/v6 explicit nullRobert Shearman
Fill in the via address length for the predefined IPv4 and IPv6 explicit-null label routes. Fixes: f8efb73c97e2 ("mpls: multipath route support") Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27sock: don't enable netstamp for af_unix socketsHannes Frederic Sowa
netstamp_needed is toggled for all socket families if they request timestamping. But some protocols don't need the lower-layer timestamping code at all. This patch starts disabling it for af-unix. E.g. systemd enables timestamping during boot-up on the journald af-unix sockets, thus causing the system to globally enable timestamping in the lower networking stack. Still, it is very probable that timestamping gets activated, by e.g. dhclient or various NTP implementations. Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27bluetooth: 6lowpan: fix NOHZ: local_softirq_pendingAlexander Aring
Jukka reported about the following warning: "NOHZ: local_softirq_pending 08" I remember this warning and we had a similar issue when using workqueues and calling netif_rx. See commit 5ff3fec ("mac802154: fix NOHZ local_softirq_pending 08 warning"). This warning occurs when calling "netif_rx" inside the wrong context (non softirq context). The net core api offers "netif_rx_ni" to call netif_rx inside the correct softirq context. Reported-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-26net: tso: add support for IPv6emmanuel.grumbach@intel.com
Adding IPv6 for the TSO helper API is trivial: * Don't play with the id (which doesn't exist in IPv6) * Correctly update the payload_len (don't include the length of the IP header itself) Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27Bluetooth: Fix crash on fast disconnect of SCOKuba Pawlak
Fix a crash that may happen when a connection is closed before it was fully established. Mapping conn->hcon was released by shutdown function, but it is still referenced in (not yet finished) connection established handling function. [ 4635.254073] BUG: unable to handle kernel NULL pointer dereference at 00000013 [ 4635.262058] IP: [<c11659f0>] memcmp+0xe/0x25 [ 4635.266835] *pdpt = 0000000024190001 *pde = 0000000000000000 [ 4635.273261] Oops: 0000 [#1] PREEMPT SMP [ 4635.277652] Modules linked in: evdev ecb vfat fat libcomposite usb2380 isofs zlib_inflate rfcomm(O) udc_core bnep(O) btusb(O) btbcm(O) btintel(O) bluetooth(O) cdc_acm arc4 uinput hid_mule [ 4635.321761] Pid: 363, comm: kworker/u:2H Tainted: G O 3.8.0-119.1-plk-adaptation-byt-ivi-brd #1 [ 4635.332642] EIP: 0060:[<c11659f0>] EFLAGS: 00010206 CPU: 0 [ 4635.338767] EIP is at memcmp+0xe/0x25 [ 4635.342852] EAX: e4720678 EBX: 00000000 ECX: 00000006 EDX: 00000013 [ 4635.349849] ESI: 00000000 EDI: fb85366c EBP: e40c7dc0 ESP: e40c7db4 [ 4635.356846] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 4635.362873] CR0: 8005003b CR2: 00000013 CR3: 24191000 CR4: 001007f0 [ 4635.369869] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 4635.376865] DR6: ffff0ff0 DR7: 00000400 [ 4635.381143] Process kworker/u:2H (pid: 363, ti=e40c6000 task=e40c5510 task.ti=e40c6000) [ 4635.390080] Stack: [ 4635.392319] e4720400 00000000 fb85366c e40c7df4 fb842285 e40c7de2 fb853200 00000013 [ 4635.401003] e3f101c4 e4720678 e3f101c0 e403be0a e40c7dfc e416a000 e403be0a fb85366c [ 4635.409692] e40c7e1c fb820186 020f6c00 e47c49ac e47c4008 00000000 e416a000 e47c402c [ 4635.418380] Call Trace: [ 4635.421153] [<fb842285>] sco_connect_cfm+0xff/0x236 [bluetooth] [ 4635.427893] [<fb820186>] hci_sync_conn_complete_evt.clone.101+0x227/0x268 [bluetooth] [ 4635.436758] [<fb82370f>] hci_event_packet+0x1caa/0x21d3 [bluetooth] [ 4635.443859] [<c106231f>] ? trace_hardirqs_on+0xb/0xd [ 4635.449502] [<c1375b8a>] ? _raw_spin_unlock_irqrestore+0x42/0x59 [ 4635.456340] [<fb814b67>] hci_rx_work+0xb9/0x350 [bluetooth] [ 4635.462663] [<c1039f1e>] ? process_one_work+0x17b/0x2e6 [ 4635.468596] [<c1039f77>] process_one_work+0x1d4/0x2e6 [ 4635.474333] [<c1039f1e>] ? process_one_work+0x17b/0x2e6 [ 4635.480294] [<fb814aae>] ? hci_cmd_work+0xda/0xda [bluetooth] [ 4635.486810] [<c103a3fa>] worker_thread+0x171/0x20f [ 4635.492257] [<c10456c5>] ? complete+0x34/0x3e [ 4635.497219] [<c103ea06>] kthread+0x90/0x95 [ 4635.501888] [<c103a289>] ? manage_workers+0x1df/0x1df [ 4635.507628] [<c1376537>] ret_from_kernel_thread+0x1b/0x28 [ 4635.513755] [<c103e976>] ? __init_kthread_worker+0x42/0x42 [ 4635.519975] Code: 74 0d 3c 79 74 04 3c 59 75 0c c6 02 01 eb 03 c6 02 00 31 c0 eb 05 b8 ea ff ff ff 5d c3 55 89 e5 57 56 53 31 db eb 0e 0f b6 34 18 <0f> b6 3c 1a 43 29 fe 75 07 49 85 c9 7f [ 4635.541264] EIP: [<c11659f0>] memcmp+0xe/0x25 SS:ESP 0068:e40c7db4 [ 4635.548166] CR2: 0000000000000013 [ 4635.552177] ---[ end trace e05ce9b8ce6182f6 ]--- Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-26ipv6: icmp: include addresses in debug messagesBjørn Mork
Messages like "icmp6_send: no reply to icmp error" are close to useless. Adding source and destination addresses to provide some more clue. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27NFC: NCI: allow spi driver to choose transfer clockVincent Cuissard
In some cases low level drivers might want to update the SPI transfer clock (e.g. during firmware download). This patch adds this support. Without any modification the driver will use the default SPI clock (from pdata or device tree). Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: move generic spi driver to a moduleVincent Cuissard
SPI driver should be a module. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: export nci_send_frame and nci_send_cmd functionVincent Cuissard
Export nci_send_frame and nci_send_cmd symbols to allow drivers to use it. This is needed for example if NCI is used during firmware download phase. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Add support for proprietary commandsChristophe Ricard
Add support for proprietary commands useful mainly for factory testings. Here is a list: - FACTORY_MODE: Allow to set the driver into a mode where no secure element are activated. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example RF trimmings or low level drivers configurations (I2C, SPI, SWP). - HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing table following RF technology, CLF mode or protocol. - HCI_DM_GET_INFO: Allow to retrieve CLF information. - HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low level drivers configurations or RF trimmings. - HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete packet can be more than 8KB. - HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF configuration changes without CLF power off. - HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the white list). - HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF technology. When using this command to anti-collision is done. - HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Add few code style fixesChristophe Ricard
Add some few code style fixes. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: netlink: Add mode parameter to deactivate_target functionsChristophe Ricard
In order to manage in a better way the nci poll mode state machine, add mode parameter to deactivate_target functions. This way we can manage different target state. mode parameter make sense only in nci core. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26Bluetooth: Fix some obvious coding style issues in the SCO moduleMarcel Holtmann
Lets fix this obvious coding style issues in the SCO module and bring it in line with the rest of the Bluetooth subsystem. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26Bluetooth: Replace hci_notify with hci_sock_dev_eventMarcel Holtmann
There is no point in wrapping hci_sock_dev_event around hci_notify. It is an empty wrapper which adds no value. So remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26Bluetooth: Rename bt_cb()->req into bt_cb()->hciMarcel Holtmann
The SKB context buffer for HCI request is really not just for requests, information in their are preserved for the whole HCI layer. So it makes more sense to actually rename it into bt_cb()->hci and also call it then struct hci_ctrl. In addition that allows moving the decoded opcode for outgoing packets into that struct. So far it was just consuming valuable space from the main shared items. And opcode are not valid for L2CAP packets. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26Bluetooth: Remove unneeded parenthesis around MSG_OOBMarcel Holtmann
There are two checks that are still using (MSG_OOB) instead of just MSG_OOB and so lets just fix them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26NFC: nci: Create pipe on specific gate in nci_hci_connect_gateChristophe Ricard
Some gates might need to have their pipes explicitly created. Add a call to nci_hci_create_pipe in nci_hci_connect_gate for every gate that is different than NCI_HCI_LINK_MGMT_GATE or NCI_HCI_ADMIN_GATE. In case of an error when opening a pipe, like in hci layer, delete the pipe if it was created. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Call nci_hci_clear_all_pipes at HCI initial activation.Christophe Ricard
When session_id is filled to 0xff, the pipe configuration is probably incorrect and needs to be cleared. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: add nci_hci_clear_all_pipes functionsChristophe Ricard
nci_hci_clear_all_pipes might be use full in some cases for example after a firmware update. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: extract pipe value using NCI_HCP_MSG_GET_PIPEChristophe Ricard
When receiving data in nci_hci_msg_rx_work, extract pipe value using NCI_HCP_MSG_GET_PIPE macro. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Fix improper management of HCI return codeChristophe Ricard
When sending HCI data over NCI, HCI return code is part of the NCI data. In order to get correctly the HCI return code, we assume the NCI communication is successful and extract the return code for the nci_hci functions return code. This is done because nci_to_errno does not match hci return code value. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Fix incorrect data chaining when sending dataChristophe Ricard
When sending HCI data over NCI, cmd information should be present only on the first packet. Each packet shall be specifically allocated and sent to the NCI layer. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25Bluetooth: Fix locking issue during fast SCO reconnection.Kuba Pawlak
When SCO connection is requested and disconnected fast, there is a change that sco_sock_shutdown is going to preempt thread started in sco_connect_cfm. When this happens struct sock sk may be removed but a pointer to it is still held in sco_conn_ready, where embedded spinlock is used. If it is used, but struct sock has been removed, it will crash. Block connection object, which will prevent struct sock from being removed and give connection process chance to finish. BUG: spinlock bad magic on CPU#0, kworker/u:2H/319 lock: 0xe3e99434, .magic: f3000000, .owner: (���/0, .owner_cpu: -203804160 Pid: 319, comm: kworker/u:2H Tainted: G O 3.8.0-115.1-plk-adaptation-byt-ivi-brd #1 Call Trace: [<c1155659>] ? do_raw_spin_lock+0x19/0xe9 [<fb75354f>] ? sco_connect_cfm+0x92/0x236 [bluetooth] [<fb731dbc>] ? hci_sync_conn_complete_evt.clone.101+0x18b/0x1cb [bluetooth] [<fb734ee7>] ? hci_event_packet+0x1acd/0x21a6 [bluetooth] [<c1041095>] ? finish_task_switch+0x50/0x89 [<c1349a2e>] ? __schedule+0x638/0x6b8 [<fb727918>] ? hci_rx_work+0xb9/0x2b8 [bluetooth] [<c103760a>] ? queue_delayed_work_on+0x21/0x2a [<c1035df9>] ? process_one_work+0x157/0x21b [<fb72785f>] ? hci_cmd_work+0xef/0xef [bluetooth] [<c1036217>] ? worker_thread+0x16e/0x20a [<c10360a9>] ? manage_workers+0x1cf/0x1cf [<c103a0ef>] ? kthread+0x8d/0x92 [<c134adf7>] ? ret_from_kernel_thread+0x1b/0x28 [<c103a062>] ? __init_kthread_worker+0x24/0x24 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) *pdpt = 00000000244e1001 *pde = 0000000000000000 Oops: 0010 [#1] PREEMPT SMP Modules linked in: evdev ecb rfcomm(O) libcomposite usb2380 udc_core bnep(O) btusb(O) btbcm(O) cdc_acm btintel(O) bluetooth(O) arc4 uinput hid_multitouch usbhid hid iwlmvm(O)e Pid: 319, comm: kworker/u:2H Tainted: G O 3.8.0-115.1-plk-adaptation-byt-ivi-brd #1 EIP: 0060:[<00000000>] EFLAGS: 00010246 CPU: 0 EIP is at 0x0 EAX: e3e99400 EBX: e3e99400 ECX: 00000100 EDX: 00000000 ESI: e3e99434 EDI: fb763ce0 EBP: e49b9e44 ESP: e49b9e14 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: 00000000 CR3: 24444000 CR4: 001007f0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process kworker/u:2H (pid: 319, ti=e49b8000 task=e4ab9030 task.ti=e49b8000) Stack: fb75355b 00000246 fb763900 22222222 22222222 22222222 e3f94460 e3ca7c0a e49b9e4c e3f34c00 e3ca7c0a fb763ce0 e49b9e6c fb731dbc 02000246 e4cec85c e4cec008 00000000 e3f34c00 e4cec000 e3c2ce00 0000002c e49b9ed0 fb734ee7 Call Trace: [<fb75355b>] ? sco_connect_cfm+0x9e/0x236 [bluetooth] [<fb731dbc>] ? hci_sync_conn_complete_evt.clone.101+0x18b/0x1cb [bluetooth] [<fb734ee7>] ? hci_event_packet+0x1acd/0x21a6 [bluetooth] [<c1041095>] ? finish_task_switch+0x50/0x89 [<c1349a2e>] ? __schedule+0x638/0x6b8 [<fb727918>] ? hci_rx_work+0xb9/0x2b8 [bluetooth] [<c103760a>] ? queue_delayed_work_on+0x21/0x2a [<c1035df9>] ? process_one_work+0x157/0x21b [<fb72785f>] ? hci_cmd_work+0xef/0xef [bluetooth] [<c1036217>] ? worker_thread+0x16e/0x20a [<c10360a9>] ? manage_workers+0x1cf/0x1cf [<c103a0ef>] ? kthread+0x8d/0x92 [<c134adf7>] ? ret_from_kernel_thread+0x1b/0x28 [<c103a062>] ? __init_kthread_worker+0x24/0x24 Code: Bad EIP value. EIP: [<00000000>] 0x0 SS:ESP 0068:e49b9e14 CR2: 0000000000000000 ---[ end trace 942a6577c0abd725 ]--- Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-25Bluetooth: Fix locking issue on SCO disconnectionKuba Pawlak
Thread handling SCO disconnection may get preempted in '__sco_sock_close' after dropping a reference to hci_conn but before marking this as NULL in associated struct sco_conn. When execution returs to this thread, this connection will possibly be released, resulting in kernel crash Lock connection before this point. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<fb770ab9>] __sco_sock_close+0x194/0x1ff [bluetooth] *pdpt = 0000000023da6001 *pde = 0000000000000000 Oops: 0002 [#1] PREEMPT SMP Modules linked in: evdev ecb rfcomm(O) libcomposite usb2380 udc_core bnep(O) btusb(O) btbcm(O) cdc_acm btintel(O) bluetooth(O) arc4 uinput hid_multitouch usbhid iwlmvm(O) hide Pid: 984, comm: bluetooth Tainted: G O 3.8.0-115.1-plk-adaptation-byt-ivi-brd #1 EIP: 0060:[<fb770ab9>] EFLAGS: 00010282 CPU: 2 EIP is at __sco_sock_close+0x194/0x1ff [bluetooth] EAX: 00000000 EBX: e49d7600 ECX: ef1ec3c2 EDX: 000000c3 ESI: e4c12000 EDI: 00000000 EBP: ef1edf5c ESP: ef1edf4c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 80050033 CR2: 00000000 CR3: 23da7000 CR4: 001007f0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process bluetooth (pid: 984, ti=ef1ec000 task=e47f2550 task.ti=ef1ec000) Stack: e4c120d0 e49d7600 00000000 08421a40 ef1edf70 fb770b7a 00000002 e8a4cc80 08421a40 ef1ec000 c12966b1 00000001 00000000 0000000b 084954c8 c1296b6c 0000001b 00000002 0000001b 00000002 00000000 00000002 b2524880 00000046 Call Trace: [<fb770b7a>] ? sco_sock_shutdown+0x56/0x95 [bluetooth] [<c12966b1>] ? sys_shutdown+0x37/0x53 [<c1296b6c>] ? sys_socketcall+0x12e/0x1be [<c134ae7e>] ? sysenter_do_call+0x12/0x26 [<c1340000>] ? ip_vs_control_net_cleanup+0x46/0xb1 Code: e8 90 6b 8c c5 f6 05 72 5d 78 fb 04 74 17 8b 46 08 50 56 68 0a fd 77 fb 68 60 5d 78 fb e8 68 95 9e c5 83 c4 10 8b 83 fc 01 00 00 <c7> 00 00 00 00 00 eb 32 ba 68 00 00 0b EIP: [<fb770ab9>] __sco_sock_close+0x194/0x1ff [bluetooth] SS:ESP 0068:ef1edf4c CR2: 0000000000000000 ---[ end trace 47fa2f55a9544e69 ]--- Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-25Bluetooth: Fix crash on SCO disconnectKuba Pawlak
When disconnecting audio from the phone's side, it may happen, that a thread handling HCI message 'disconnection complete' will get preempted in 'sco_conn_del' before calling 'sco_sock_kill', still holding a pointer to struct sock sk. Interrupting thread started in 'sco_sock_shutdown' will carry on releasing resources and will eventually release struct sock. When execution goes back to first thread it will call sco_sock_kill using now invalid pointer to already destroyed socket. Fix is to grab a reference to the socket a release it after calling 'sco_sock_kill'. [ 166.358213] BUG: unable to handle kernel paging request at 7541203a [ 166.365228] IP: [<fb6e8bfb>] bt_sock_unlink+0x1a/0x38 [bluetooth] [ 166.372068] *pdpt = 0000000024b19001 *pde = 0000000000000000 [ 166.378483] Oops: 0002 [#1] PREEMPT SMP [ 166.382871] Modules linked in: evdev ecb rfcomm(O) libcomposite usb2380 udc_core bnep(O) btusb(O) btbcm(O) btintel(O) cdc_acm bluetooth(O) arc4 uinput hid_multitouch iwlmvm(O) usbhid hide [ 166.424233] Pid: 338, comm: kworker/u:2H Tainted: G O 3.8.0-115.1-plk-adaptation-byt-ivi-brd #1 [ 166.435112] EIP: 0060:[<fb6e8bfb>] EFLAGS: 00010206 CPU: 0 [ 166.441259] EIP is at bt_sock_unlink+0x1a/0x38 [bluetooth] [ 166.447382] EAX: 632e6563 EBX: e4bfc600 ECX: e466d4d3 EDX: 7541203a [ 166.454369] ESI: fb7278ac EDI: e4d52000 EBP: e4669e20 ESP: e4669e0c [ 166.461366] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 166.467391] CR0: 8005003b CR2: 7541203a CR3: 24aba000 CR4: 001007f0 [ 166.474387] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 166.481375] DR6: ffff0ff0 DR7: 00000400 [ 166.485654] Process kworker/u:2H (pid: 338, ti=e4668000 task=e466e030 task.ti=e4668000) [ 166.494591] Stack: [ 166.496830] e4bfc600 e4bfc600 fb715c28 e4717ee0 e4d52000 e4669e3c fb715cf3 e4bfc634 [ 166.505518] 00000068 e4d52000 e4c32000 fb7277c0 e4669e6c fb6f2019 0000004a 00000216 [ 166.514205] e4660101 e4c32008 02000001 00000013 e4d52000 e4c32000 e3dc9240 00000005 [ 166.522891] Call Trace: [ 166.525654] [<fb715c28>] ? sco_sock_kill+0x73/0x9a [bluetooth] [ 166.532295] [<fb715cf3>] ? sco_conn_del+0xa4/0xbf [bluetooth] [ 166.538836] [<fb6f2019>] ? hci_disconn_complete_evt.clone.55+0x1bd/0x205 [bluetooth] [ 166.547609] [<fb6f73d3>] ? hci_event_packet+0x297/0x223c [bluetooth] [ 166.554805] [<c10416da>] ? dequeue_task+0xaf/0xb7 [ 166.560154] [<c1041095>] ? finish_task_switch+0x50/0x89 [ 166.566086] [<c1349a2e>] ? __schedule+0x638/0x6b8 [ 166.571460] [<fb6eb906>] ? hci_rx_work+0xb9/0x2b8 [bluetooth] [ 166.577975] [<c1035df9>] ? process_one_work+0x157/0x21b [ 166.583933] [<fb6eb84d>] ? hci_cmd_work+0xef/0xef [bluetooth] [ 166.590448] [<c1036217>] ? worker_thread+0x16e/0x20a [ 166.596088] [<c10360a9>] ? manage_workers+0x1cf/0x1cf [ 166.601826] [<c103a0ef>] ? kthread+0x8d/0x92 [ 166.606691] [<c134adf7>] ? ret_from_kernel_thread+0x1b/0x28 [ 166.613010] [<c103a062>] ? __init_kthread_worker+0x24/0x24 [ 166.619230] Code: 85 63 ff ff ff 31 db 8d 65 f4 89 d8 5b 5e 5f 5d c3 56 8d 70 04 53 89 f0 89 d3 e8 7e 17 c6 c5 8b 53 28 85 d2 74 1a 8b 43 24 85 c0 <89> 02 74 03 89 50 04 c7 43 28 00 00 00 [ 166.640501] EIP: [<fb6e8bfb>] bt_sock_unlink+0x1a/0x38 [bluetooth] SS:ESP 0068:e4669e0c [ 166.649474] CR2: 000000007541203a [ 166.653420] ---[ end trace 0181ff2c9e42d51e ]--- [ 166.658609] note: kworker/u:2H[338] exited with preempt_count 1 Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-25NFC: nci: add nci_get_conn_info_by_id functionRobert Dolca
This functin takes as a parameter a pointer to the nci_dev struct and the first byte from the values of the first domain specific parameter that was used for the connection creation. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: fix possible crash in nci_core_conn_createRobert Dolca
If the number of destination speific parameters supplied is 0 the call will fail. If the first destination specific parameter does not have a value, curr_id will be set to 0. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: rename nci_prop_ops to nci_driver_opsRobert Dolca
Initially it was used to create hooks in the driver for proprietary operations. Currently it is being used for hooks for both proprietary and generic operations. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Allow the driver to set handler for core nci opsRobert Dolca
The driver may be required to act when some responses or notifications arrive. For example the NCI core does not have a handler for NCI_OP_CORE_GET_CONFIG_RSP. The NFCC can send a config response that has to be read by the driver and the packet may contain vendor specific data. The Fields Peak driver needs to take certain actions when a reset notification arrives (packet also not handled by the nfc core). The driver handlers do not interfere with the core and they are called after the core processes the packet. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Introduce nci_core_cmdRobert Dolca
This allows sending core commands from the driver. The driver should be able to send NCI core commands like CORE_GET_CONFIG_CMD. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Do not call post_setup when setup failsRobert Dolca
The driver should know that it can continue with post setup where setup left off. Being able to execute post_setup when setup fails may force the developer to keep this state in the driver. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Add function to get max packet size for connRobert Dolca
FDP driver needs to send the firmware as regular packets (not fragmented). The driver should have a way to get the max packet size for a given connection. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25NFC: nci: Export nci data send APIRobert Dolca
For the firmware update the driver may use nci_send_data. Signed-off-by: Robert Dolca <robert.dolca@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-25af_unix: do not report POLLOUT on listenersEric Dumazet
poll(POLLOUT) on a listener should not report fd is ready for a write(). This would break some applications using poll() and pfd.events = -1, as they would not block in poll() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alan Burlison <Alan.Burlison@oracle.com> Tested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-25tipc: link_is_bc_sndlink() can be staticWu Fengguang
TO: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org CC: Jon Maloy <jon.maloy@ericsson.com> CC: Ying Xue <ying.xue@windriver.com> CC: tipc-discussion@lists.sourceforge.net CC: linux-kernel@vger.kernel.org Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: clean up unused code and structuresJon Paul Maloy
After the previous changes in this series, we can now remove some unused code and structures, both in the broadcast, link aggregation and link code. There are no functional changes in this commit. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: ensure binding table initial distribution is sent via first linkJon Paul Maloy
Correct synchronization of the broadcast link at first contact between two nodes is dependent on the assumption that the binding table "bulk" update passes via the same link as the initial broadcast syncronization message, i.e., via the first link that is established. This is not guaranteed in the current implementation. If two link come up very close to each other in time, the "bulk" may quite well pass via the second link, and hence void the guarantee of a correct initial synchronization before the broadcast link is opened. This commit makes two small changes to strengthen this guarantee. 1) We let the second established link occupy slot 1 of the "active_links" array, while the first link will retain slot 0. (This is in reality a cosmetic change, we could just as well keep the current, opposite order) 2) We let the name distributor always use link selector/slot 0 when it sends it binding table updates. The extra traffic bias on the first link caused by this change should be negligible, since binding table updates constitutes a very small fraction of the total traffic. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: eliminate link's reference to owner nodeJon Paul Maloy
With the recent commit series, we have established a one-way dependency between the link aggregation (struct tipc_node) instances and their pertaining tipc_link instances. This has enabled quite significant code and structure simplifications. In this commit, we eliminate the field 'owner', which points to an instance of struct tipc_node, from struct tipc_link, and replace it with a pointer to struct net, which is the only external reference now needed by a link instance. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: eliminate redundant buffer cloning at transmissionJon Paul Maloy
Since all packet transmitters (link, bcast, discovery) are now sending consumable buffer clones to the bearer layer, we can remove the redundant buffer cloning that is perfomed in the lower level functions tipc_l2_send_msg() and tipc_udp_send_msg(). Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24tipc: let neighbor discoverer tranmsit consumable buffersJon Paul Maloy
The neighbor discovery function currently uses the function tipc_bearer_send() for transmitting packets, assuming that the sent buffers are not consumed by the called function. We want to change this, in order to avoid unnecessary buffer cloning elswhere in the code. This commit introduces a new function tipc_bearer_skb() which consumes the sent buffers, and let the discoverer functions use this new call instead. The discoverer does now itself perform the cloning when that is necessary. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-17 03:39:28 +0000