summaryrefslogtreecommitdiff
path: root/scripts/kconfig
AgeCommit message (Collapse)Author
2008-02-13kconfig: fix select in combination with defaultRoman Zippel
> The attached .config (with current -git) results in a compile > error since it contains: > > CONFIG_X86=y > # CONFIG_EMBEDDED is not set > CONFIG_SERIO=m > CONFIG_SERIO_I8042=y > > Looking at drivers/input/serio/Kconfig I simply don't get how this > can happen. You've hit the rather subtle rules of select vs default. What happened is that SERIO is selected to m, but SERIO_I8042 isn't selected so the default of y is used instead. We already had the problem in the past that select and default don't work well together, so this patch cleans this up and makes the rule hopefully more straightforward. Basically now the value is calculated like this: (value && dependency) || select where the value is the user choice (if available and the symbol is visible) or default. In this case it means SERIO and SERIO_I8042 are both set to y due to their default and if SERIO didn't had the default, then the SERIO_I8042 value would be limited to m due to the dependency. I tested this patch with more 10000 random configs and above case is the only the difference that showed up, so I hope there is nothing that depended on the old more complex and subtle rules. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Tested-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-03kconfig: ignore select of unknown symbolSam Ravnborg
We have had warnings for a long time about select of unknow symbol but the warnings does not really makes sense since we may select a symbol that is relevant and defined in one arch but not in another arch. And as long as we do not use a common set of Kconfig files for all archs lets just ignore this case. Previously we have used this to find bad uses of select but we need a more relaible method to do so. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-02-03kconfig: mark config as changed when loading an alternate configSam Ravnborg
Michal Zachar <mgzachar@mail.t-com.sk> reported that menuconfig did not save the new config when loading an alternate config unless he altered it manually. Mark config as changed upon load of alternate config fixed this. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: tristate choices with mixed tristate and boolean valuesJan Beulich
Change kconfig behavior so that mixing bool and tristate config settings in a choice is possible and has the desired effect of offering just the tristate options individually if the choice gets set to M, and a normal boolean selection if the choice gets set to Y. Also fix scripts/kconfig/conf's handling of children of choice values - there may be more than one immediate child, and all of them need to be processed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: "Roman Zippel" <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: remove "enable"Adrian Bunk
Kconfig had a synonym "enable" for "select" that was neither documented nor used. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: use environment optionRoman Zippel
Use the environment option to provide the ARCH symbol and the KERNELVERSION symbol. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: environment symbol supportRoman Zippel
Add the possibility to import a value from the environment into kconfig via the option syntax. Beside flexibility this has the advantage providing proper dependencies. Documented the options syntax. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: explicitly introduce expression listRoman Zippel
Rename E_CHOICE to E_LIST to explicitly add support for expression lists. Add a helper macro expr_list_for_each_sym to more easily iterate over the list. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28kconfig: gconfig: symbol fixEGRY Gabor
Gettext support for symbol names are unnecessary. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: gettext support for configEGRY Gabor
Gettext support for conf.c [Include locale.h by Kyle]. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Kyle McMartin <kyle@mcmartin.ca>
2008-01-28kconfig: gettext support for lxdialogEGRY Gabor
Gettext support for lxdialog. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: gettext support for menuconfigEGRY Gabor
Full gettext support for menuconfig. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: gettext support for xconfigEGRY Gabor
Full gettext support for xconfig. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: macro fix in menu.cEGRY Gabor
This patch removes the indirect I18N support for config file. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: gettext support for gconfigEGRY Gabor
Gettext support for menu and toolbar. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: missing macros in gconfigEGRY Gabor
This patch adds missing gettext macros. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: whitespace removingEGRY Gabor
This patch removes the unnecessary whitespaces from end of help lines of Kconfig files. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: update-po-config infoEGRY Gabor
This patch adds tracking messages. Signed-off-by: Egry Gabor <gaboregry1@t-online.hu> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: use C89 random functions in conf.cLadislav Michl
rand and srand functions conform also to C89 in addition to POSIX.1-2001, which makes them a bit more portable (work also on MinGW host). Linux man page also says: "The versions of rand() and srand() in the Linux C Library use the same random number generator as random() and srandom()". * Use C89 conformant functions rand() and srand() Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: fix whitespace and sort includes in conf.cLadislav Michl
Sort includes and remove leading whitespace. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org
2008-01-28kconfig: delete unused FILE_ and SYMBOL_ flagsSam Ravnborg
The *_PRINTED flags were never used - so delete them. Do we need them later then we can re-add them. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: rename E_OR & friends to avoid name clashSam Ravnborg
We had macros named the same as a set of enumeration values. It is legal code but very confusing to read - so rename the macros from E_* to EXPR_* Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: allow overriding symbolsJan Engelhardt
Allow config variables in .config to override earlier ones in the same file. In other words, # CONFIG_SECURITY is not defined CONFIG_SECURITY=y will activate it. This makes it a bit easier to do cat original-config myconfig myconfig2 ... >.config; and run *config as expected. Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Randy Dunlap <randy.dunlap@oracle.com>
2008-01-28kconfig: make kconfig MinGW friendlyLadislav Michl
Kconfig is powerfull tool. So powerfull that more and more software projects are using it for configuration. So instead of fixing some of them one by one, lets fix it in kernel and wait for sync. This work was originaly done for PTXdist - GPL licensed build system for userlands and cross-compilers, but it will not hurt kernel kconfig either. PTXdist menuconfig now works on Windows linked with PDCurses and compiled using MinGW - there is no termios and signals. * Do not include <sys/wait.h> and <signal.h> (comes from times when lxdialog was separate process) * Do not mess with termios directly and let curses tell screen size. Comment to commit c8dc68ad0fbd934e78e913b8a8d7b45945db4930 says check for screen size could be removed later, but because it didn't happen for more than year I left it here as well. * Save cursor position added by Sam Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: use getopt() in conf.c for handling command line argumentsAndres Salomon
Switch from doing our own parsing of command line arguments to using getopt(3) to do it. Aside from simplifying things, this allows us to specify multiple arguments; the old code could only accept two arguments (input_mode and kconfig name). Note some subtle changes: - The argument '-?' is no longer supported. - '-h' is not treated as an error, so output goes to stdout, and we exit with '0'. - There is no compatibility checking amongst arguments; the last option will simply override earlier options. For example, 'conf -n -y foo' is perfectly valid now (input_mode will be set_yes). Previously, that would have been an error ("can't find file -y"). Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2008-01-28kconfig: if ncurses-devel is missing then say soSam Ravnborg
With this patch when ncurses-devel (or whatever it is named) is missing trying to run menuconfig will result in this: $ make menuconfig HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/kxgettext.o *** Unable to find the ncurses libraries or the *** required header files. *** 'make menuconfig' requires the ncurses libraries. *** *** Install ncurses (ncurses-devel) and try again. *** make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1 make: *** [menuconfig] Error 2 Much better than before where we just listed some build errors. The other *config targets will work indepenednt on ncurses being present or not. Includes improvements suggested by: Frans Pop <elendil@planet.nl> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Frans Pop <elendil@planet.nl>
2007-12-23kconfig: obey KCONFIG_ALLCONFIG choices with randconfig.Paul Mundt
Currently when using KCONFIG_ALLCONFIG with randconfig the choice options are clobbered. As recommended by Roman, this adds an is_new test to see whether to select a new option or obey the existing one. This is a resend of the earlier patch a couple of weeks ago, since there was no reply. Original thread is at http://lkml.org/lkml/2007/11/28/94 Signed-off-by: Paul Mundt <lethal@linux-sh.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-17x86: simplify "make ARCH=x86" and fix kconfig all.configSam Ravnborg
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in all.config. For a fix the diffstat is nice: 6 files changed, 3 insertions(+), 36 deletions(-) The patch reverts these commits: - 0f855aa64b3f63d35a891510cf7db932a435c116 ("kconfig: add helper to set config symbol from environment variable") - 2a113281f5cd2febbab21a93c8943f8d3eece4d3 ("kconfig: use $K64BIT to set 64BIT with all*config targets") Roman Zippel pointed out that kconfig supported string compares so the additional complexity introduced by the above two patches were not needed. With this patch we have following behaviour: # make {allno,allyes,allmod,rand}config [ARCH=...] option \ host arch | 32bit | 64bit ===================================================== ./. | 32bit | 64bit ARCH=x86 | 32bit | 32bit ARCH=i386 | 32bit | 32bit ARCH=x86_64 | 64bit | 64bit The general rule are that ARCH= and native architecture takes precedence over the configuration. So make ARCH=i386 [whatever] will always build a 32-bit kernel no matter what the configuration says. The configuration will be updated to 32-bit if it was configured to 64-bit and the other way around. This behaviour is consistent with previous behaviour so no suprises here. make ARCH=x86 will per default result in a 32-bit kernel but as the only ARCH= value x86 allow the user to select between 32-bit and 64-bit using menuconfig. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Herrmann <aherrman@arcor.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-12x86: enable "make ARCH=x86"Sam Ravnborg
After unification of the Kconfig files and introducing K64BIT support in kconfig it required only trivial changes to enable "make ARCH=x86". With this patch you can build for x86_64 in several ways: 1) make ARCH=x86_64 2) make ARCH=x86 K64BIT=y 3) make ARCH=x86 menuconfig => select 64-bit Likewise for i386 with the addition that i386 is default is you say ARCH=x86. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
2007-11-12kconfig: use $K64BIT to set 64BIT with all*config targetsSam Ravnborg
The variable K64BIT can now be used to select the value of CONFIG_64BIT. This is for example useful for powerpc to generate allmodconfig for both bit sizes - like this: make ARCH=powerpc K64BIT=y make ARCH=powerpc K64BIT=n To use this the Kconfig file must use "64BIT" as the config value to select between 32 and 64 bit. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12kconfig: add helper to set config symbol from environment variableSam Ravnborg
Add conf_set_env_sym() that can set an already defined symbol based on the value of an environment variable. Unknown symbols are silently ignored. A warning is printed if the value of the environment variable is unexpected. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-11-12kconfig: factor out code in confdata.cSam Ravnborg
This patch introduce no functional changes. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-10-25x86: move i386 and x86_64 Kconfig files to x86 directorySam Ravnborg
After a small change in kconfig Makefile we could move all x86 Kconfig files to x86 directory. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25kconfig: small code refactoring in kconfig MakefileSam Ravnborg
Do not hardcode the arch/$(ARCH)/Kconfig name all over Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-25x86: move defconfig files for i386 and x86_64 to x86Sam Ravnborg
With some small changes to kconfig makefile we can now locate the defconfig files for i386 and x86_64 in the configs/ subdirectory under x86. make ARCH=i386 defconfig and make defconfig works as expected also after this change. But arch maintainers shall now update a defconfig file in the configs/ directory. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-20kconfig: set title bar in xconfigRandy Dunlap
Put kernel version info on title bar in xconfig (qconf) instead of defaulting to "qconf". Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-19Revert "kconfig: tristate choices with mixed tristate and boolean values"Linus Torvalds
This reverts commit a5bf3d891a6a0fb5aa122792d965e3774108b923. David Brownell notes that this causes a regression visible in the drivers/usb/gadget Kconfig file: "That Kconfig hasn't changed (other than adding new drivers), and it's worked that way for several years now ... so the issue seems to be changes in menuconfig/kconfig/etc semantics. The issue is that when USB_GADGET=m, it's no longer possible to configure peripheral controller drivers as modules ... the controller drivers can now only be configured for static linkage. It should be making a choice of one of the controller drivers which could work on the target system, and allow that driver to be linked either as a module (ok iff USB_GADGET=m) or statically." Reverting this commit resolves the problem, and also fixes a second problem that David noticed: various dependent options couldn't be enabled. Tested-and-reported-by: David Brownell <david-b@pacbell.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Jan Beulich <jbeulich@novell.com>, Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: Sam Ravnborg <sam@ravnborg.org>, Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18kconfig: comment typo in scripts/kconfig/Makefile.Rob Landley
Typo in comment in scripts/kconfig/Makefile. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kconfig/menuconfig: distinguish between selected-by-another options and commentsMatej Laitl
menuconfig currently represents options implied by another option ('select' directive in Kconfig) by prefixing them with '---'. Unfortunately the same notation is used for comments. If the implied option is module capable, user can still switch between Y and M, all without any feedback until she visits option's help. (try saying M to MAC80211 and then toggling CFG80211) This patch changes notation of selected-by-another items by introducing 2 new representations for implied options: {*} or {M} for options selected by another modularized one, thus builtin or module capable, -*- or -M- for options that cannot be at the moment changed by user. The idea is to represent actual capability of the option by braces (dashes) around and to always report actual state by * or M inside. Signed-off-by: Matej Laitl <strohel@gmail.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kconfig: tristate choices with mixed tristate and boolean valuesJan Beulich
Change kconfig behavior so that mixing bool and tristate config settings in a choice is possible and has the desired effect of offering just the tristate options individually if the choice gets set to M, and a normal boolean selection if the choice gets set to Y. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kbuild: update _shipped files for kconfig syntax cleanupSam Ravnborg
Update _shipped files so regular user does not need to have bison/flex/gperf installed. Code changes were contained in previous commit. Used following program versions (on fedora): bison (GNU Bison) 2.3 flex 2.5.33 GNU gperf 3.0.2 Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"Adrian Bunk
Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kconfig: fix segv fault in menuconfigSam Ravnborg
With specific configurations requesting help for certain menu lines caused menuconfig to crash. This was tracked down to a null pointer bug. Thanks to "Miles Lane" <miles.lane@gmail.com> for inital reporting and to Gabriel C <nix.or.die@googlemail.com> for the backtrace that helped me locating the bug. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kconfig: make comments stand out in menuconfigSam Ravnborg
Matěj Laitl <strohel@gmail.com> noticed that there was no way to distingush between comments and un-selectable menu lines. This patch marks comments with *** comment *** Cc: Matěj Laitl <strohel@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-12kbuild: check if we can link gettext not just compileSam Ravnborg
cygwin provides the header file but the lib file needs to be added manually. A generic fix is to check if we can compile and link a program that uses gettext() and if it fails fall back to NO_NLS. International users of cygwin may have to specify HOST_LOADLIBES := "-lintl" on the make command line. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-09-01kconfig: oldconfig shall not set symbols if it does not need toRoman Zippel
Avoid setting the value if the symbol doesn't need to be changed or can't be changed. Later choices may change the dependencies and thus the possible input range. make oldconfig from a 2.6.22 .config with CONFIG_HOTPLUG_CPU not set was in some configurations setting CONFIG_HOTPLUG_CPU=y without asking, even when there was no actual requirement for CONFIG_HOTPLUG_CPU. This was triggered by SUSPEND_SMP that does a select HOTPLUG_CPU. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Tested-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-25kconfig: remove unused members from struct symbolSam Ravnborg
dep and dep2 in struct symbol was unused - remove them. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-07-25kconfig: attach help text to menusSam Ravnborg
Roman Zippel wrote: > A simple example would be > help texts, right now they are per symbol, but they should really be per > menu, so archs can provide different help texts for something. This patch does this and at the same time introduce a few API funtions used to access the help text. The relevant api functions are introduced in the various frontends. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
2007-07-17kconfig: reset generated values only if Kconfig and .config agree.Roman Zippel
Normally generated values (Kconfig entries without a prompt) are cleared as they are regenerated anyway and so they appear as new should they become visible and defaults work as expected (once a value is set defaults aren't used anymore). The detection whether a value is generated or not is only based on its visibility status, which can quickly change for a lot of symbols by just removing a single line from .config or adding a dependency to Kconfig as you noticed. The patch now suppresses this logic when .config and Kconfig aren't in sync and .config needs to be updated, so that you can remove now a random value from .config and oldconfig won't reask for many other values. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-07-17kconfig: strip 'CONFIG_' automatically in kernel configuration searchBernhard Walle
Modify the ncurses configuration tool ('make menuconfig') in a way that the user can enter the search string (/) both with or without the leading 'CONFIG_'. This simplifies using copy & paste from .config files because you can select the whole word. Signed-off-by: Bernhard Walle <bwalle@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>