summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)Author
2020-11-01scripts/setlocalversion: make git describe output more reliableRasmus Villemoes
commit 548b8b5168c90c42e88f70fcf041b4ce0b8e7aa8 upstream. When building for an embedded target using Yocto, we're sometimes observing that the version string that gets built into vmlinux (and thus what uname -a reports) differs from the path under /lib/modules/ where modules get installed in the rootfs, but only in the length of the -gabc123def suffix. Hence modprobe always fails. The problem is that Yocto has the concept of "sstate" (shared state), which allows different developers/buildbots/etc. to share build artifacts, based on a hash of all the metadata that went into building that artifact - and that metadata includes all dependencies (e.g. the compiler used etc.). That normally works quite well; usually a clean build (without using any sstate cache) done by one developer ends up being binary identical to a build done on another host. However, one thing that can cause two developers to end up with different builds [and thus make one's vmlinux package incompatible with the other's kernel-dev package], which is not captured by the metadata hashing, is this `git describe`: The output of that can be affected by (1) git version: before 2.11 git defaulted to a minimum of 7, since 2.11 (git.git commit e6c587) the default is dynamic based on the number of objects in the repo (2) hence even if both run the same git version, the output can differ based on how many remotes are being tracked (or just lots of local development branches or plain old garbage) (3) and of course somebody could have a core.abbrev config setting in ~/.gitconfig So in order to avoid `uname -a` output relying on such random details of the build environment which are rather hard to ensure are consistent between developers and buildbots, make sure the abbreviated sha1 always consists of exactly 12 hex characters. That is consistent with the current rule for -stable patches, and is almost always enough to identify the head commit unambigously - in the few cases where it does not, the v5.4.3-00021- prefix would certainly nail it down. [Adapt to `` vs $() differences between 5.4 and upstream.] Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-07scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwritingUwe Kleine-König
[ Upstream commit efe84d408bf41975db8506d3a1cc02e794e2309c ] When building with $ HOST_EXTRACFLAGS=-g make the expectation is that host tools are built with debug informations. This however doesn't happen if the Makefile assigns a new value to the HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for the first assignment. Fixes: e3fd9b5384f3 ("scripts/dtc: consolidate include path options in Makefile") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09checkpatch: fix the usage of capture group ( ... )Mrinal Pandey
commit 13e45417cedbfc44b1926124b1846f5ee8c6ba4a upstream. The usage of "capture group (...)" in the immediate condition after `&&` results in `$1` being uninitialized. This issues a warning "Use of uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl line 2638". I noticed this bug while running checkpatch on the set of commits from v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in their commit message. This bug was introduced in the script by commit e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog"). It has been in the script since then. The author intended to store the match made by capture group in variable `$1`. This should have contained the name of the file as `[\w/]+` matched. However, this couldn't be accomplished due to usage of capture group and `$1` in the same regular expression. Fix this by placing the capture group in the condition before `&&`. Thus, `$1` can be initialized to the text that capture group matches thereby setting it to the desired and required value. Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog") Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Joe Perches <joe@perches.com> Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03kbuild: fix broken builds because of GZIP,BZIP2,LZOP variablesDenis Efremov
commit e4a42c82e943b97ce124539fcd7a47445b43fa0d upstream. Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp. GZIP, BZIP2, LZOP env variables are reserved by the tools. The original attempt to redefine them internally doesn't work in makefiles/scripts intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in broken builds. There can be other broken build commands because of this, so the universal solution is to use non-reserved env variables for the compression tools. Fixes: 8dfb61dcbace ("kbuild: add variables for compression tools") Signed-off-by: Denis Efremov <efremov@linux.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-03kbuild: add variables for compression toolsDenis Efremov
commit 8dfb61dcbaceb19a5ded5e9c9dcf8d05acc32294 upstream. Allow user to use alternative implementations of compression tools, such as pigz, pbzip2, pxz. For example, multi-threaded tools to speed up the build: $ make GZIP=pigz BZIP2=pbzip2 Variables _GZIP, _BZIP2, _LZOP are used internally because original env vars are reserved by the tools. The use of GZIP in gzip tool is obsolete since 2015. However, alternative implementations (e.g., pigz) still rely on it. BZIP2, BZIP, LZOP vars are not obsolescent. The credit goes to @grsecurity. As a sidenote, for multi-threaded lzma, xz compression one can use: $ export XZ_OPT="--threads=0" Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-26kconfig: qconf: fix signal connection to invalid slotsMasahiro Yamada
[ Upstream commit d85de3399f97467baa2026fbbbe587850d01ba8a ] If you right-click in the ConfigList window, you will see the following messages in the console: QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:888 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:897 QObject::connect: (sender name: 'config') QObject::connect: No such slot QAction::setOn(bool) in scripts/kconfig/qconf.cc:906 QObject::connect: (sender name: 'config') Right, there is no such slot in QAction. I think this is a typo of setChecked. Due to this bug, when you toggled the menu "Option->Show Name/Range/Data" the state of the context menu was not previously updated. Fix this. Fixes: d5d973c3f8a9 ("Port xconfig to Qt5 - Put back some of the old implementation(part 2)") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26kconfig: qconf: do not limit the pop-up menu to the first rowMasahiro Yamada
[ Upstream commit fa8de0a3bf3c02e6f00b7746e7e934db522cdda9 ] If you right-click the first row in the option tree, the pop-up menu shows up, but if you right-click the second row or below, the event is ignored due to the following check: if (e->y() <= header()->geometry().bottom()) { Perhaps, the intention was to show the pop-menu only when the tree header was right-clicked, but this handler is not called in that case. Since the origin of e->y() starts from the bottom of the header, this check is odd. Going forward, you can right-click anywhere in the tree to get the pop-up menu. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21recordmcount: Fix build failure on non arm64Christophe Leroy
[ Upstream commit 3df14264ad9930733a8166e5bd0eccc1727564bb ] Commit ea0eada45632 leads to the following build failure on powerpc: HOSTCC scripts/recordmcount scripts/recordmcount.c: In function 'arm64_is_fake_mcount': scripts/recordmcount.c:440: error: 'R_AARCH64_CALL26' undeclared (first use in this function) scripts/recordmcount.c:440: error: (Each undeclared identifier is reported only once scripts/recordmcount.c:440: error: for each function it appears in.) make[2]: *** [scripts/recordmcount] Error 1 Make sure R_AARCH64_CALL26 is always defined. Fixes: ea0eada45632 ("recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by: Gregory Herrero <gregory.herrero@oracle.com> Cc: Gregory Herrero <gregory.herrero@oracle.com> Link: https://lore.kernel.org/r/5ca1be21fa6ebf73203b45fd9aadd2bafb5e6b15.1597049145.git.christophe.leroy@csgroup.eu Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19recordmcount: only record relocation of type R_AARCH64_CALL26 on arm64.Gregory Herrero
[ Upstream commit ea0eada45632f4807b2f49de951072283e2d781c ] Currently, if a section has a relocation to '_mcount' symbol, a new __mcount_loc entry will be added whatever the relocation type is. This is problematic when a relocation to '_mcount' is in the middle of a section and is not a call for ftrace use. Such relocation could be generated with below code for example: bool is_mcount(unsigned long addr) { return (target == (unsigned long) &_mcount); } With this snippet of code, ftrace will try to patch the mcount location generated by this code on module load and fail with: Call trace: ftrace_bug+0xa0/0x28c ftrace_process_locs+0x2f4/0x430 ftrace_module_init+0x30/0x38 load_module+0x14f0/0x1e78 __do_sys_finit_module+0x100/0x11c __arm64_sys_finit_module+0x28/0x34 el0_svc_common+0x88/0x194 el0_svc_handler+0x38/0x8c el0_svc+0x8/0xc ---[ end trace d828d06b36ad9d59 ]--- ftrace failed to modify [<ffffa2dbf3a3a41c>] 0xffffa2dbf3a3a41c actual: 66:a9:3c:90 Initializing ftrace call sites ftrace record flags: 2000000 (0) expected tramp: ffffa2dc6cf66724 So Limit the relocation type to R_AARCH64_CALL26 as in perl version of recordmcount. Fixes: af64d2aa872a ("ftrace: Add arm64 support to recordmcount") Signed-off-by: Gregory Herrero <gregory.herrero@oracle.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20200717143338.19302-1-gregory.herrero@oracle.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-11scripts: add dummy report mode to add_namespace.cocciMatthias Maennich
commit 55c7549819e438f40a3ef1d8ac5c38b73390bcb7 upstream. When running `make coccicheck` in report mode using the add_namespace.cocci file, it will fail for files that contain MODULE_LICENSE. Those match the replacement precondition, but spatch errors out as virtual.ns is not set. In order to fix that, add the virtual rule nsdeps and only do search and replace if that rule has been explicitly requested. In order to make spatch happy in report mode, we also need a dummy rule, as otherwise it errors out with "No rules apply". Using a script:python rule appears unrelated and odd, but this is the shortest I could come up with. Adjust scripts/nsdeps accordingly to set the nsdeps rule when run trough `make nsdeps`. Suggested-by: Julia Lawall <julia.lawall@inria.fr> Fixes: c7c4e29fb5a4 ("scripts: add_namespace: Fix coccicheck failed") Cc: YueHaibing <yuehaibing@huawei.com> Cc: jeyu@kernel.org Cc: cocci@systeme.lip6.fr Cc: stable@vger.kernel.org Signed-off-by: Matthias Maennich <maennich@google.com> Reported-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Julia Lawall <julia.lawall@inria.fr> Link: https://lore.kernel.org/r/20200604164145.173925-1-maennich@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29scripts/gdb: fix lx-symbols 'gdb.error' while loading modulesStefano Garzarella
[ Upstream commit 7359608a271ce81803de148befefd309baf88c76 ] Commit ed66f991bb19 ("module: Refactor section attr into bin attribute") removed the 'name' field from 'struct module_sect_attr' triggering the following error when invoking lx-symbols: (gdb) lx-symbols loading vmlinux scanning for modules in linux/build loading @0xffffffffc014f000: linux/build/drivers/net/tun.ko Python Exception <class 'gdb.error'> There is no member named name.: Error occurred in Python: There is no member named name. This patch fixes the issue taking the module name from the 'struct attribute'. Fixes: ed66f991bb19 ("module: Refactor section attr into bin attribute") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Kieran Bingham <kbingham@kernel.org> Link: http://lkml.kernel.org/r/20200722102239.313231-1-sgarzare@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-29scripts/decode_stacktrace: strip basepath from all pathsPi-Hsun Shih
[ Upstream commit d178770d8d21489abf5bafefcbb6d5243b482e9a ] Currently the basepath is removed only from the beginning of the string. When the symbol is inlined and there's multiple line outputs of addr2line, only the first line would have basepath removed. Change to remove the basepath prefix from all lines. Fixes: 31013836a71e ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex") Co-developed-by: Shik Chen <shik@chromium.org> Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Shik Chen <shik@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Cc: Sasha Levin <sashal@kernel.org> Cc: Nicolas Boichat <drinkcat@chromium.org> Cc: Jiri Slaby <jslaby@suse.cz> Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30recordmcount: support >64k sectionsSami Tolvanen
[ Upstream commit 4ef57b21d6fb49d2b25c47e4cff467a0c2c8b6b7 ] When compiling a kernel with Clang and LTO, we need to run recordmcount on vmlinux.o with a large number of sections, which currently fails as the program doesn't understand extended section indexes. This change adds support for processing binaries with >64k sections. Link: https://lkml.kernel.org/r/20200424193046.160744-1-samitolvanen@google.com Link: https://lore.kernel.org/lkml/CAK7LNARbZhoaA=Nnuw0=gBrkuKbr_4Ng_Ei57uafujZf7Xazgw@mail.gmail.com/ Cc: Kees Cook <keescook@chromium.org> Reviewed-by: Matt Helsley <mhelsley@vmware.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30kbuild: improve cc-option to clean up all temporary filesMasahiro Yamada
[ Upstream commit f2f02ebd8f3833626642688b2d2c6a7b3c141fa9 ] When cc-option and friends evaluate compiler flags, the temporary file $$TMP is created as an output object, and automatically cleaned up. The actual file path of $$TMP is .<pid>.tmp, here <pid> is the process ID of $(shell ...) invoked from cc-option. (Please note $$$$ is the escape sequence of $$). Such garbage files are cleaned up in most cases, but some compiler flags create additional output files. For example, -gsplit-dwarf creates a .dwo file. When CONFIG_DEBUG_INFO_SPLIT=y, you will see a bunch of .<pid>.dwo files left in the top of build directories. You may not notice them unless you do 'ls -a', but the garbage files will increase every time you run 'make'. This commit changes the temporary object path to .tmp_<pid>/tmp, and removes .tmp_<pid> directory when exiting. Separate build artifacts such as *.dwo will be cleaned up all together because their file paths are usually determined based on the base name of the object. Another example is -ftest-coverage, which outputs the coverage data into <base-name-of-object>.gcno Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24scripts: headers_install: Exit with error on config leakSiddharth Gupta
[ Upstream commit 5967577231f9b19acd5a59485e9075964065bbe3 ] Misuse of CONFIG_* in UAPI headers should result in an error. These config options can be set in userspace by the user application which includes these headers to control the APIs and structures being used in a kernel which supports multiple targets. Signed-off-by: Siddharth Gupta <sidgup@codeaurora.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24mksysmap: Fix the mismatch of '.L' symbols in System.mapashimida
[ Upstream commit 72d24accf02add25e08733f0ecc93cf10fcbd88c ] When System.map was generated, the kernel used mksysmap to filter the kernel symbols, but all the symbols with the second letter 'L' in the kernel were filtered out, not just the symbols starting with 'dot + L'. For example: ashimida@ubuntu:~/linux$ cat System.map |grep ' .L' ashimida@ubuntu:~/linux$ nm -n vmlinux |grep ' .L' ffff0000088028e0 t bLength_show ...... ffff0000092e0408 b PLLP_OUTC_lock ffff0000092e0410 b PLLP_OUTA_lock The original intent should be to filter out all local symbols starting with '.L', so the dot should be escaped. Fixes: 00902e984732 ("mksysmap: Add h8300 local symbol pattern") Signed-off-by: ashimida <ashimida@linux.alibaba.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-17bpf: Support llvm-objcopy for vmlinux BTFFangrui Song
commit 90ceddcb495008ac8ba7a3dce297841efcd7d584 upstream. Simplify gen_btf logic to make it work with llvm-objcopy. The existing 'file format' and 'architecture' parsing logic is brittle and does not work with llvm-objcopy/llvm-objdump. 'file format' output of llvm-objdump>=11 will match GNU objdump, but 'architecture' (bfdarch) may not. .BTF in .tmp_vmlinux.btf is non-SHF_ALLOC. Add the SHF_ALLOC flag because it is part of vmlinux image used for introspection. C code can reference the section via linker script defined __start_BTF and __stop_BTF. This fixes a small problem that previous .BTF had the SHF_WRITE flag (objcopy -I binary -O elf* synthesized .data). Additionally, `objcopy -I binary` synthesized symbols _binary__btf_vmlinux_bin_start and _binary__btf_vmlinux_bin_stop (not used elsewhere) are replaced with more commonplace __start_BTF and __stop_BTF. Add 2>/dev/null because GNU objcopy (but not llvm-objcopy) warns "empty loadable segment detected at vaddr=0xffffffff81000000, is this intentional?" We use a dd command to change the e_type field in the ELF header from ET_EXEC to ET_REL so that lld will accept .btf.vmlinux.bin.o. Accepting ET_EXEC as an input file is an extremely rare GNU ld feature that lld does not intend to support, because this is error-prone. The output section description .BTF in include/asm-generic/vmlinux.lds.h avoids potential subtle orphan section placement issues and suppresses --orphan-handling=warn warnings. Fixes: df786c9b9476 ("bpf: Force .BTF section start to zero when dumping from vmlinux") Fixes: cb0cc635c7a9 ("powerpc: Include .BTF section") Reported-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Fangrui Song <maskray@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Stanislav Fomichev <sdf@google.com> Tested-by: Andrii Nakryiko <andriin@fb.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://github.com/ClangBuiltLinux/linux/issues/871 Link: https://lore.kernel.org/bpf/20200318222746.173648-1-maskray@google.com Signed-off-by: Maria Teguiani <teguiani@google.com> Tested-by: Matthias Maennich <maennich@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27kbuild: Remove debug info from kallsyms linkingKees Cook
[ Upstream commit af73d78bd384aa9b8789aa6e7ddbb165f971276f ] When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend time collecting and writing the dwarf sections to the temporary output files. kallsyms does not need this information, and leaving it off halves their linking time. This is especially noticeable without CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still need those details. Refactor the BTF and kallsyms generation stages slightly for more regularized temporary names. Skip debug during kallsyms links. Additionally move "info BTF" to the correct place since commit 8959e39272d6 ("kbuild: Parameterize kallsyms generation and correct reporting"), which added "info LD ..." to vmlinux_link calls. For a full debug info build with BTF, my link time goes from 1m06s to 0m54s, saving about 12 seconds, or 18%. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/202003031814.4AEA3351@keescook Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27scripts/gdb: repair rb_first() and rb_last()Aymeric Agon-Rambosson
[ Upstream commit 50e36be1fb9572b2e4f2753340bdce3116bf2ce7 ] The current implementations of the rb_first() and rb_last() gdb functions have a variable that references itself in its instanciation, which causes the function to throw an error if a specific condition on the argument is met. The original author rather intended to reference the argument and made a typo. Referring the argument instead makes the function work as intended. Signed-off-by: Aymeric Agon-Rambosson <aymeric.agon@yandex.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Nikolay Borisov <n.borisov.lkml@gmail.com> Cc: Jackie Liu <liuyun01@kylinos.cn> Cc: Jason Wessel <jason.wessel@windriver.com> Link: http://lkml.kernel.org/r/20200427051029.354840-1-aymeric.agon@yandex.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-27gcc-common.h: Update for GCC 10Frédéric Pierret (fepitre)
[ Upstream commit c7527373fe28f97d8a196ab562db5589be0d34b9 ] Remove "params.h" include, which has been dropped in GCC 10. Remove is_a_helper() macro, which is now defined in gimple.h, as seen when running './scripts/gcc-plugin.sh g++ g++ gcc': In file included from <stdin>:1: ./gcc-plugins/gcc-common.h:852:13: error: redefinition of ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ 852 | inline bool is_a_helper<const ggoto *>::test(const_gimple gs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./gcc-plugins/gcc-common.h:125, from <stdin>:1: /usr/lib/gcc/x86_64-redhat-linux/10/plugin/include/gimple.h:1037:1: note: ‘static bool is_a_helper<T>::test(U*) [with U = const gimple; T = const ggoto*]’ previously declared here 1037 | is_a_helper <const ggoto *>::test (const gimple *gs) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ Add -Wno-format-diag to scripts/gcc-plugins/Makefile to avoid meaningless warnings from error() formats used by plugins: scripts/gcc-plugins/structleak_plugin.c: In function ‘int plugin_init(plugin_name_args*, plugin_gcc_version*)’: scripts/gcc-plugins/structleak_plugin.c:253:12: warning: unquoted sequence of 2 consecutive punctuation characters ‘'-’ in format [-Wformat-diag] 253 | error(G_("unknown option '-fplugin-arg-%s-%s'"), plugin_name, argv[i].key); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Frédéric Pierret (fepitre) <frederic.pierret@qubes-os.org> Link: https://lore.kernel.org/r/20200407113259.270172-1-frederic.pierret@qubes-os.org [kees: include -Wno-format-diag for plugin builds] Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-14scripts/decodecode: fix trapping instruction formattingIvan Delalande
commit e08df079b23e2e982df15aa340bfbaf50f297504 upstream. If the trapping instruction contains a ':', for a memory access through segment registers for example, the sed substitution will insert the '*' marker in the middle of the instruction instead of the line address: 2b: 65 48 0f c7 0f cmpxchg16b %gs:*(%rdi) <-- trapping instruction I started to think I had forgotten some quirk of the assembly syntax before noticing that it was actually coming from the script. Fix it to add the address marker at the right place for these instructions: 28: 49 8b 06 mov (%r14),%rax 2b:* 65 48 0f c7 0f cmpxchg16b %gs:(%rdi) <-- trapping instruction 30: 0f 94 c0 sete %al Fixes: 18ff44b189e2 ("scripts/decodecode: make faulting insn ptr more robust") Signed-off-by: Ivan Delalande <colona@arista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/20200419223653.GA31248@visor Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-10scripts/config: allow colons in option strings for sedJeremie Francois (on alpha)
[ Upstream commit e461bc9f9ab105637b86065d24b0b83f182d477c ] Sed broke on some strings as it used colon as a separator. I made it more robust by using \001, which is legit POSIX AFAIK. E.g. ./config --set-str CONFIG_USBNET_DEVADDR "de:ad:be:ef:00:01" failed with: sed: -e expression #1, char 55: unknown option to `s' Signed-off-by: Jeremie Francois (on alpha) <jeremie.francois@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-02kbuild: fix DT binding schema rule again to avoid needless rebuildsMasahiro Yamada
commit 3d4b2238684ac919394eba7fb51bb7eeeec6ab57 upstream. Since commit 7a0496056064 ("kbuild: fix DT binding schema rule to detect command line changes"), this rule is every time re-run even if you change nothing. cmd_dtc takes one additional parameter to pass to the -O option of dtc. We need to pass 'yaml' to if_changed_rule. Otherwise, cmd-check invoked from if_changed_rule is false positive. Fixes: 7a0496056064 ("kbuild: fix DT binding schema rule to detect command line changes") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-29kconfig: qconf: Fix a few alignment issuesMauro Carvalho Chehab
[ Upstream commit 60969f02f07ae1445730c7b293c421d179da729c ] There are a few items with wrong alignments. Solve them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-08kconfig: introduce m32-flag and m64-flagMasahiro Yamada
[ Upstream commit 8cc4fd73501d9f1370c3eebb70cfe8cc9e24062b ] When a compiler supports multiple architectures, some compiler features can be dependent on the target architecture. This is typical for Clang, which supports multiple LLVM backends. Even for GCC, we need to take care of biarch compiler cases. It is not a problem when we evaluate cc-option in Makefiles because cc-option is tested against the flag in question + $(KBUILD_CFLAGS). The cc-option in Kconfig, on the other hand, does not accumulate tested flags. Due to this simplification, it could potentially test cc-option against a different target. At first, Kconfig always evaluated cc-option against the host architecture. Since commit e8de12fb7cde ("kbuild: Check for unknown options with cc-option usage in Kconfig and clang"), in case of cross-compiling with Clang, the target triple is correctly passed to Kconfig. The case with biarch GCC (and native build with Clang) is still not handled properly. We need to pass some flags to specify the target machine bit. Due to the design, all the macros in Kconfig are expanded in the parse stage, where we do not know the target bit size yet. For example, arch/x86/Kconfig allows a user to toggle CONFIG_64BIT. If a compiler flag -foo depends on the machine bit, it must be tested twice, one with -m32 and the other with -m64. However, -m32/-m64 are not always recognized. So, this commits adds m64-flag and m32-flag macros. They expand to -m32, -m64, respectively if supported. Or, they expand to an empty string if unsupported. The typical usage is like this: config FOO bool default $(cc-option,$(m64-flag) -foo) if 64BIT default $(cc-option,$(m32-flag) -foo) This is clumsy, but there is no elegant way to handle this in the current static macro expansion. There was discussion for static functions vs dynamic functions. The consensus was to go as far as possible with the static functions. (https://lkml.org/lkml/2018/3/2/22) Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: George Spelvin <lkml@sdf.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-01scripts/dtc: Remove redundant YYLOC global declarationDirk Mueller
commit e33a814e772cdc36436c8c188d8c42d019fda639 upstream. gcc 10 will default to -fno-common, which causes this error at link time: (.text+0x0): multiple definition of `yylloc'; dtc-lexer.lex.o (symbol from plugin):(.text+0x0): first defined here This is because both dtc-lexer as well as dtc-parser define the same global symbol yyloc. Before with -fcommon those were merged into one defintion. The proper solution would be to to mark this as "extern", however that leads to: dtc-lexer.l:26:16: error: redundant redeclaration of 'yylloc' [-Werror=redundant-decls] 26 | extern YYLTYPE yylloc; | ^~~~~~ In file included from dtc-lexer.l:24: dtc-parser.tab.h:127:16: note: previous declaration of 'yylloc' was here 127 | extern YYLTYPE yylloc; | ^~~~~~ cc1: all warnings being treated as errors which means the declaration is completely redundant and can just be dropped. Signed-off-by: Dirk Mueller <dmueller@suse.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au> [robh: cherry-pick from upstream] Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25modpost: move the namespace field in Module.symvers lastJessica Yu
commit 5190044c2965514a973184ca68ef5fad57a24670 upstream. In order to preserve backwards compatability with kmod tools, we have to move the namespace field in Module.symvers last, as the depmod -e -E option looks at the first three fields in Module.symvers to check symbol versions (and it's expected they stay in the original order of crc, symbol, module). In addition, update an ancient comment above read_dump() in modpost that suggested that the export type field in Module.symvers was optional. I suspect that there were historical reasons behind that comment that are no longer accurate. We have been unconditionally printing the export type since 2.6.18 (commit bd5cbcedf44), which is over a decade ago now. Fix up read_dump() to treat each field as non-optional. I suspect the original read_dump() code treated the export field as optional in order to support pre <= 2.6.18 Module.symvers (which did not have the export type field). Note that although symbol namespaces are optional, the field will not be omitted from Module.symvers if a symbol does not have a namespace. In this case, the field will simply be empty and the next delimiter or end of line will follow. Cc: stable@vger.kernel.org Fixes: cb9b55d21fe0 ("modpost: add support for symbol namespaces") Tested-by: Matthias Maennich <maennich@google.com> Reviewed-by: Matthias Maennich <maennich@google.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25kbuild: Disable -Wpointer-to-enum-castNathan Chancellor
commit 82f2bc2fcc0160d6f82dd1ac64518ae0a4dd183f upstream. Clang's -Wpointer-to-int-cast deviates from GCC in that it warns when casting to enums. The kernel does this in certain places, such as device tree matches to set the version of the device being used, which allows the kernel to avoid using a gigantic union. https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L428 https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L402 https://elixir.bootlin.com/linux/v5.5.8/source/include/linux/mod_devicetable.h#L264 To avoid a ton of false positive warnings, disable this particular part of the warning, which has been split off into a separate diagnostic so that the entire warning does not need to be turned off for clang. It will be visible under W=1 in case people want to go about fixing these easily and enabling the warning treewide. Cc: stable@vger.kernel.org Link: https://github.com/ClangBuiltLinux/linux/issues/887 Link: https://github.com/llvm/llvm-project/commit/2a41b31fcdfcb67ab7038fc2ffb606fd50b83a84 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25parse-maintainers: Mark as executableJonathan Neuschäfer
[ Upstream commit 611d61f9ac99dc9e1494473fb90117a960a89dfa ] This makes the script more convenient to run. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-05kbuild: move headers_check rule to usr/include/MakefileMasahiro Yamada
commit 7ecaf069da52e472d393f03e79d721aabd724166 upstream. Currently, some sanity checks for uapi headers are done by scripts/headers_check.pl, which is wired up to the 'headers_check' target in the top Makefile. It is true compiling headers has better test coverage, but there are still several headers excluded from the compile test. I like to keep headers_check.pl for a while, but we can delete a lot of code by moving the build rule to usr/include/Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-05kbuild: remove header compile testMasahiro Yamada
commit fcbb8461fd2376ba3782b5b8bd440c929b8e4980 upstream. There are both positive and negative options about this feature. At first, I thought it was a good idea, but actually Linus stated a negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it is ugly and annoying. The baseline I'd like to keep is the compile-test of uapi headers. (Otherwise, kernel developers have no way to ensure the correctness of the exported headers.) I will maintain a small build rule in usr/include/Makefile. Remove the other header test functionality. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [ added to 5.4.y due to start of build warnings from backported patches because of this feature - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-05kbuild: fix DT binding schema rule to detect command line changesMasahiro Yamada
commit 7a04960560640ac5b0b89461f7757322b57d0c7a upstream. This if_change_rule is not working properly; it cannot detect any command line change. The reason is because cmd-check in scripts/Kbuild.include compares $(cmd_$@) and $(cmd_$1), but cmd_dtc_dt_yaml does not exist here. For if_change_rule to work properly, the stem part of cmd_* and rule_* must match. Because this cmd_and_fixdep invokes cmd_dtc, this rule must be named rule_dtc. Fixes: 4f0e3a57d6eb ("kbuild: Add support for DT binding schema checks") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-24bpf, btf: Always output invariant hit in pahole DWARF to BTF transformChris Down
[ Upstream commit 2a67a6ccb01f21b854715d86ff6432a18b97adb3 ] When trying to compile with CONFIG_DEBUG_INFO_BTF enabled, I got this error: % make -s Failed to generate BTF for vmlinux Try to disable CONFIG_DEBUG_INFO_BTF make[3]: *** [vmlinux] Error 1 Compiling again without -s shows the true error (that pahole is missing), but since this is fatal, we should show the error unconditionally on stderr as well, not silence it using the `info` function. With this patch: % make -s BTF: .tmp_vmlinux.btf: pahole (pahole) is not available Failed to generate BTF for vmlinux Try to disable CONFIG_DEBUG_INFO_BTF make[3]: *** [vmlinux] Error 1 Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200122000110.GA310073@chrisdown.name Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24kbuild: use -S instead of -E for precise cc-option test in KconfigMasahiro Yamada
[ Upstream commit 3bed1b7b9d79ca40e41e3af130931a3225e951a3 ] Currently, -E (stop after the preprocessing stage) is used to check whether the given compiler flag is supported. While it is faster than -S (or -c), it can be false-positive. You need to run the compilation proper to check the flag more precisely. For example, -E and -S disagree about the support of "--param asan-instrument-allocas=1". $ gcc -Werror --param asan-instrument-allocas=1 -E -x c /dev/null -o /dev/null $ echo $? 0 $ gcc -Werror --param asan-instrument-allocas=1 -S -x c /dev/null -o /dev/null cc1: error: invalid --param name ‘asan-instrument-allocas’; did you mean ‘asan-instrument-writes’? $ echo $? 1 Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24kbuild: remove *.tmp file when filechk failsMasahiro Yamada
[ Upstream commit 88fe89a47153facd8cb2d06d5c8727f7224c43c2 ] Bartosz Golaszewski reports that when "make {menu,n,g,x}config" fails due to missing packages, a temporary file is left over, which is not ignored by git. For example, if GTK+ is not installed: $ make gconfig * * Unable to find the GTK+ installation. Please make sure that * the GTK+ 2.0 development package is correctly installed. * You need gtk+-2.0 gmodule-2.0 libglade-2.0 * scripts/kconfig/Makefile:208: recipe for target 'scripts/kconfig/gconf-cfg' failed make[1]: *** [scripts/kconfig/gconf-cfg] Error 1 Makefile:567: recipe for target 'gconfig' failed make: *** [gconfig] Error 2 $ git status HEAD detached at v5.4 Untracked files: (use "git add <file>..." to include in what will be committed) scripts/kconfig/gconf-cfg.tmp nothing added to commit but untracked files present (use "git add" to track) This is because the check scripts are run with filechk, which misses to clean up the temporary file on failure. When the line { $(filechk_$(1)); } > $@.tmp; ... fails, it exits immediately due to the 'set -e'. Use trap to make sure to delete the temporary file on exit. For extra safety, I replaced $@.tmp with $(dot-target).tmp to make it a hidden file. Reported-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24kconfig: fix broken dependency in randconfig-generated .configMasahiro Yamada
[ Upstream commit c8fb7d7e48d11520ad24808cfce7afb7b9c9f798 ] Running randconfig on arm64 using KCONFIG_SEED=0x40C5E904 (e.g. on v5.5) produces the .config with CONFIG_EFI=y and CONFIG_CPU_BIG_ENDIAN=y, which does not meet the !CONFIG_CPU_BIG_ENDIAN dependency. This is because the user choice for CONFIG_CPU_LITTLE_ENDIAN vs CONFIG_CPU_BIG_ENDIAN is set by randomize_choice_values() after the value of CONFIG_EFI is calculated. When this happens, the has_changed flag should be set. Currently, it takes the result from the last iteration. It should accumulate all the results of the loop. Fixes: 3b9a19e08960 ("kconfig: loop as long as we changed some symbols in randconfig") Reported-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-11scripts/find-unused-docs: Fix massive false positivesGeert Uytterhoeven
commit 1630146db2111412e7524d05d812ff8f2c75977e upstream. scripts/find-unused-docs.sh invokes scripts/kernel-doc to find out if a source file contains kerneldoc or not. However, as it passes the no longer supported "-text" option to scripts/kernel-doc, the latter prints out its help text, causing all files to be considered containing kerneldoc. Get rid of these false positives by removing the no longer supported "-text" option from the scripts/kernel-doc invocation. Cc: stable@vger.kernel.org # 4.16+ Fixes: b05142675310d2ac ("scripts: kernel-doc: get rid of unused output formats") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200127093107.26401-1-geert+renesas@glider.be Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-29ARM: 8950/1: ftrace/recordmcount: filter relocation typesAlex Sverdlin
commit 927d780ee371d7e121cea4fc7812f6ef2cea461c upstream. Scenario 1, ARMv7 ================= If code in arch/arm/kernel/ftrace.c would operate on mcount() pointer the following may be generated: 00000230 <prealloc_fixed_plts>: 230: b5f8 push {r3, r4, r5, r6, r7, lr} 232: b500 push {lr} 234: f7ff fffe bl 0 <__gnu_mcount_nc> 234: R_ARM_THM_CALL __gnu_mcount_nc 238: f240 0600 movw r6, #0 238: R_ARM_THM_MOVW_ABS_NC __gnu_mcount_nc 23c: f8d0 1180 ldr.w r1, [r0, #384] ; 0x180 FTRACE currently is not able to deal with it: WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230() ... CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1 ... [<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14) [<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8) [<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90) [<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c) [<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230) [<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444) [<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8) [<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358) [<c0885a67>] (start_kernel) from [<00308095>] (0x308095) ---[ end trace cb88537fdc8fa200 ]--- ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60 actual: 44:f2:e1:36 ftrace record flags: 0 (0) expected tramp: c03143e9 Scenario 2, ARMv4T ================== ftrace: allocating 14435 entries in 43 pages ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310 CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1 Hardware name: Cirrus Logic EDB9302 Evaluation Board [<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c) [<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30) [<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104) [<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c) [<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310) [<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4) [<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410) [<c04cef4c>] (start_kernel) from [<00000000>] ( (null)) ---[ end trace 0506a2f5dae6b341 ]--- ftrace failed to modify [<c000c350>] perf_trace_sys_exit+0x5c/0xe8 actual: 1e:ff:2f:e1 Initializing ftrace call sites ftrace record flags: 0 (0) expected tramp: c000fb24 The analysis for this problem has been already performed previously, refer to the link below. Fix the above problems by allowing only selected reloc types in __mcount_loc. The list itself comes from the legacy recordmcount.pl script. Link: https://lore.kernel.org/lkml/56961010.6000806@pengutronix.de/ Cc: stable@vger.kernel.org Fixes: ed60453fa8f8 ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26bpf: Force .BTF section start to zero when dumping from vmlinuxStanislav Fomichev
commit df786c9b947639aedbc7bb44b5dae2a7824af360 upstream. While trying to figure out why fentry_fexit selftest doesn't pass for me (old pahole, broken BTF), I found out that my latest patch can break vmlinux .BTF generation. objcopy preserves section start when doing --only-section, so there is a chance (depending on where pahole inserts .BTF section) to have leading empty zeroes. Let's explicitly force section offset to zero. Before: $ objcopy --set-section-flags .BTF=alloc -O binary \ --only-section=.BTF vmlinux .btf.vmlinux.bin $ xxd .btf.vmlinux.bin | head -n1 00000000: 0000 0000 0000 0000 0000 0000 0000 0000 ................ After: $ objcopy --change-section-address .BTF=0 \ --set-section-flags .BTF=alloc -O binary \ --only-section=.BTF vmlinux .btf.vmlinux.bin $ xxd .btf.vmlinux.bin | head -n1 00000000: 9feb 0100 1800 0000 0000 0000 80e1 1c00 ................ ^BTF magic As part of this change, I'm also dropping '2>/dev/null' from objcopy invocation to be able to catch possible other issues (objcopy doesn't produce any warnings for me anymore, it did before with --dump-section). Fixes: da5fb18225b4 ("bpf: Support pre-2.25-binutils objcopy for vmlinux BTF") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191127225759.39923-1-sdf@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-17kbuild/deb-pkg: annotate libelf-dev dependency as :nativeArd Biesheuvel
[ Upstream commit 8ffdc54b6f4cd718a45802e645bb853e3a46a078 ] Cross compiling the x86 kernel on a non-x86 build machine produces the following error when CONFIG_UNWINDER_ORC is enabled, regardless of whether libelf-dev is installed or not. dpkg-checkbuilddeps: error: Unmet build dependencies: libelf-dev dpkg-buildpackage: warning: build dependencies/conflicts unsatisfied; aborting dpkg-buildpackage: warning: (Use -d flag to override.) Since this is a build time dependency for a build tool, we need to depend on the native version of libelf-dev so add the appropriate annotation. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-17bpf: Support pre-2.25-binutils objcopy for vmlinux BTFStanislav Fomichev
commit da5fb18225b49b97bb37c51bcbbb2990a507c364 upstream. If vmlinux BTF generation fails, but CONFIG_DEBUG_INFO_BTF is set, .BTF section of vmlinux is empty and kernel will prohibit BPF loading and return "in-kernel BTF is malformed". --dump-section argument to binutils' objcopy was added in version 2.25. When using pre-2.25 binutils, BTF generation silently fails. Convert to --only-section which is present on pre-2.25 binutils. Documentation/process/changes.rst states that binutils 2.21+ is supported, not sure those standards apply to BPF subsystem. v2: * exit and print an error if gen_btf fails (John Fastabend) v3: * resend with Andrii's Acked-by/Tested-by tags Fixes: 341dfcf8d78ea ("btf: expose BTF info through sysfs") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Andrii Nakryiko <andriin@fb.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20191127161410.57327-1-sdf@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-12scripts: package: mkdebian: add missing rsync dependencyEnrico Weigelt, metux IT consult
[ Upstream commit a11391b6f50689adb22c65df783e09143fafb794 ] We've missed the dependency to rsync, so build fails on minimal containers. Fixes: 59b2bd05f5f4 ("kbuild: add 'headers' target to build up uapi headers in usr/include") Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-12kconfig: don't crash on NULL expressions in expr_eq()Thomas Hebb
[ Upstream commit 272a72103012862e3a24ea06635253ead0b6e808 ] NULL expressions are taken to always be true, as implemented by the expr_is_yes() macro and by several other functions in expr.c. As such, they ought to be valid inputs to expr_eq(), which compares two expressions. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-09gcc-plugins: make it possible to disable CONFIG_GCC_PLUGINS againArnd Bergmann
commit a5b0dc5a46c221725c43bd9b01570239a4cd78b1 upstream. I noticed that randconfig builds with gcc no longer produce a lot of ccache hits, unlike with clang, and traced this back to plugins now being enabled unconditionally if they are supported. I am now working around this by adding export CCACHE_COMPILERCHECK=/usr/bin/size -A %compiler% to my top-level Makefile. This changes the heuristic that ccache uses to determine whether the plugins are the same after a 'make clean'. However, it also seems that being able to just turn off the plugins is generally useful, at least for build testing it adds noticeable overhead but does not find a lot of bugs additional bugs, and may be easier for ccache users than my workaround. Fixes: 9f671e58159a ("security: Create "kernel hardening" config area") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20191211133951.401933-1-arnd@arndb.de Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04scripts/kallsyms: fix definitely-lost memory leakMasahiro Yamada
[ Upstream commit 21915eca088dc271c970e8351290e83d938114ac ] build_initial_tok_table() overwrites unused sym_entry to shrink the table size. Before the entry is overwritten, table[i].sym must be freed since it is malloc'ed data. This fixes the 'definitely lost' report from valgrind. I ran valgrind against x86_64_defconfig of v5.4-rc8 kernel, and here is the summary: [Before the fix] LEAK SUMMARY: definitely lost: 53,184 bytes in 2,874 blocks [After the fix] LEAK SUMMARY: definitely lost: 0 bytes in 0 blocks Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04dtc: Use pkg-config to locate libyamlPavel Modilaynen
[ Upstream commit 067c650c456e758f933aaf87a202f841d34be269 ] Using Makefile's wildcard with absolute path to detect the presence of libyaml results in false-positive detection when cross-compiling e.g. in yocto environment. The latter results in build error: | scripts/dtc/yamltree.o: In function `yaml_propval_int': | yamltree.c: undefined reference to `yaml_sequence_start_event_initialize' | yamltree.c: undefined reference to `yaml_emitter_emit' | yamltree.c: undefined reference to `yaml_scalar_event_initialize' ... Use pkg-config to locate libyaml to address this scenario. Signed-off-by: Pavel Modilaynen <pavel.modilaynen@axis.com> [robh: silence stderr] Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-15Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Will Deacon: "One trivial fix for -rc8/final that ensures that the script used to detect RELR relocation support in the toolchain works correctly when $CC contains quotes. Although it fails safely (by failing to detect the support when it exists), it would be nice to have this fixed in 5.4 given that it was only introduced in the last merge window. Summary: - Handle CC variables containing quotes in tools-support-relr.sh script" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: scripts/tools-support-relr.sh: un-quote variables
2019-11-13scripts/tools-support-relr.sh: un-quote variablesIlie Halip
When the CC variable contains quotes, e.g. when using ccache (make CC="ccache <compiler>"), this script always fails, so CONFIG_RELR is never enabled, even when the toolchain supports this feature. Removing the /dev/null redirect and invoking the script manually shows the issue: $ CC='/usr/bin/ccache clang' ./scripts/tools-support-relr.sh ./scripts/tools-support-relr.sh: 7: ./scripts/tools-support-relr.sh: /usr/bin/ccache clang: not found Fix this by un-quoting the variables. Before: $ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \ NM=llvm-nm OBJCOPY=llvm-objcopy defconfig $ grep RELR .config CONFIG_ARCH_HAS_RELR=y With this change: $ make ARCH=arm64 CC='/usr/bin/ccache clang' LD=ld.lld \ NM=llvm-nm OBJCOPY=llvm-objcopy defconfig $ grep RELR .config CONFIG_TOOLS_SUPPORT_RELR=y CONFIG_ARCH_HAS_RELR=y CONFIG_RELR=y Fixes: 5cf896fb6be3 ("arm64: Add support for relocating the kernel with RELR relocations") Reported-by: Dmitry Golovin <dima@golovin.in> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://github.com/ClangBuiltLinux/linux/issues/769 Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-08Merge tag 'modules-for-v5.4-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules fix from Jessica Yu: "Fix `make nsdeps` for modules composed of multiple source files. Since $mod_source_files was not in quotes in the call to generate_deps_for_ns(), not all the source files for a module were being passed to spatch" * tag 'modules-for-v5.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: scripts/nsdeps: make sure to pass all module source files to spatch
2019-11-06scripts/gdb: fix debugging modules compiled with hot/cold partitioningIlya Leoshkevich
gcc's -freorder-blocks-and-partition option makes it group frequently and infrequently used code in .text.hot and .text.unlikely sections respectively. At least when building modules on s390, this option is used by default. gdb assumes that all code is located in .text section, and that .text section is located at module load address. With such modules this is no longer the case: there is code in .text.hot and .text.unlikely, and either of them might precede .text. Fix by explicitly telling gdb the addresses of code sections. It might be tempting to do this for all sections, not only the ones in the white list. Unfortunately, gdb appears to have an issue, when telling it about e.g. loadable .note.gnu.build-id section causes it to think that non-loadable .note.Linux section is loaded at address 0, which in turn causes NULL pointers to be resolved to bogus symbols. So keep using the white list approach for the time being. Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 05:49:43 +0000