summaryrefslogtreecommitdiff
path: root/sound/pci/emu10k1
AgeCommit message (Collapse)Author
2018-08-06ALSA: emu10k1: Rate-limit error messages about page errorsTakashi Iwai
[ Upstream commit 11d42c81036324697d367600bfc16f6dd37636fd ] The error messages at sanity checks of memory pages tend to repeat too many times once when it hits, and without the rate limit, it may flood and become unreadable. Replace such messages with the *_ratelimited() variant. Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1093027 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-06ALSA: emu10k1: add error handling for snd_ctl_addZhouyang Jia
[ Upstream commit 6d531e7b972cb62ded011c2dfcc2d9f72ea6c421 ] When snd_ctl_add fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling snd_ctl_add. Signed-off-by: Zhouyang Jia <jiazhouyang09@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-08ALSA: emu10k1: rename Audigy Analog Capture Boost controlMaciej S. Szmigiero
Audigy has "Analog Capture Boost" mixer control, however now this only controls mic level, not other analog sources. It applies also both to playback and capture, so rename it to something more descriptive. Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-07-08ALSA: emu10k1: enable TAD mic out on AudigyMaciej S. Szmigiero
Enable TAD output on Audigy naming it "Phone Output", to be consistent with TAD input which is called "Phone". According to Creative doc ( http://support.creative.com/kb/ShowArticle.aspx?sid=3026 ) this should output just mic signal. Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-07-08ALSA: emu10k1: remove unused AC'97 mixer controls on AudigyMaciej S. Szmigiero
AC'97 Headphone output and EAPD control aren't used on Audigy so remove them from mixer. Also remove AC'97 3D control as the driver is already doing for Audigys with 1361T ADC. Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-29ALSA: emu10k1: Fix/cleanup ifdef CONFIG_PROC_FSTakashi Iwai
Build emuproc.o conditionally and drop the unneeded ifdefs. Some are replaced with the new CONFIG_SND_PROC_FS. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-29Merge branch 'for-linus' into for-nextTakashi Iwai
Conflicts: sound/pci/emu10k1/emu10k1_main.c Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-29ALSA: emu10k1: Emu10k2 32 bit DMA modePeter Zubaj
Looks like audigy emu10k2 (probably emu10k1 - sb live too) support two modes for DMA. Second mode is useful for 64 bit os with more then 2 GB of ram (fixes problems with big soundfont loading) 1) 32MB from 2 GB address space using 8192 pages (used now as default) 2) 16MB from 4 GB address space using 4096 pages Mode is set using HCFG_EXPANDED_MEM flag in HCFG register. Also format of emu10k2 page table is then different. Signed-off-by: Peter Zubaj <pzubaj@marticonet.sk> Tested-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-27Merge branch 'for-4.2' into for-nextTakashi Iwai
2015-04-27ALSA: emu10k1: Fix card shortname string buffer overflowTakashi Iwai
Some models provide too long string for the shortname that has 32bytes including the terminator, and it results in a non-terminated string exposed to the user-space. This isn't too critical, though, as the string is stopped at the succeeding longname string. This patch fixes such entries by dropping "SB" prefix (it's enough to fit within 32 bytes, so far). Meanwhile, it also changes strcpy() with strlcpy() to make sure that this kind of problem won't happen in future, too. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-16ALSA: remove deprecated use of pci apiQuentin Lambert
Replace occurences of the pci api by appropriate call to the dma api. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr) @deprecated@ idexpression id; position p; @@ ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @bad1@ idexpression id; position deprecated.p; @@ ...when != &id->dev when != pci_get_drvdata ( id ) when != pci_enable_device ( id ) ( pci_dma_supported@p ( id, ...) | pci_alloc_consistent@p ( id, ...) ) @depends on !bad1@ idexpression id; expression direction; position deprecated.p; @@ ( - pci_dma_supported@p ( id, + dma_supported ( &id->dev, ... + , GFP_ATOMIC ) | - pci_alloc_consistent@p ( id, + dma_alloc_coherent ( &id->dev, ... + , GFP_ATOMIC ) ) Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-13Merge branch 'for-next' into for-linusTakashi Iwai
2015-04-11ALSA: emu10k1: add toggles for E-mu 1010 optical portsMichael Gernoth
The optical ports on the E-mu 1010 (and dock) can be configured for ADAT- or S/PDIF-mode, which is currently hardcoded to ADAT. Add two mixer elements to expose this setting. Tested on an E-mu 1010 PCIe with connected Micro Dock. Signed-off-by: Michael Gernoth <michael@gernoth.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-11ALSA: emu10k1: handle dock disconnectsMichael Gernoth
When the dock on an E-mu 1010 card is disconnected, all outputs get muted by the hardware. Add logic to detect a disconnect and unmute. Signed-off-by: Michael Gernoth <michael@gernoth.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-10ALSA: emu10k1: don't deadlock in proc-functionsMichael Gernoth
The functions snd_emu10k1_proc_spdif_read and snd_emu1010_fpga_read acquire the emu_lock before accessing the FPGA. The function used to access the FPGA (snd_emu1010_fpga_read) also tries to take the emu_lock which causes a deadlock. Remove the outer locking in the proc-functions (guarding only the already safe fpga read) to prevent this deadlock. [removed superfluous flags variables too -- tiwai] Signed-off-by: Michael Gernoth <michael@gernoth.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-05ALSA: emu10k1: add Audigy 5/RxMichael Gernoth
The Audigy 5/Rx is essentially an Audigy 4 behind a PLX PCIe- bridge with an additional TOSLINK output. Signed-off-by: Michael Gernoth <michael@gernoth.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-12ALSA: seq: Define driver object in each driverTakashi Iwai
This patch moves the driver object initialization and allocation to each driver's module init/exit code like other normal drivers. The snd_seq_driver struct is now published in seq_device.h, and each driver is responsible to define it with proper driver attributes (name, probe and remove) with snd_seq_driver specific attributes as id and argsize fields. The helper functions snd_seq_driver_register(), snd_seq_driver_unregister() and module_snd_seq_driver() are used for simplifying codes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-11Merge branch 'topic/pci-cleanup' into for-nextTakashi Iwai
2015-01-09ALSA: emu10k1: Simplify PM callbacksTakashi Iwai
This is a similar cleanup like the commit [3db084fd0af5: ALSA: fm801: PCI core handles power state for us]. Since pci_set_power_state(), pci_save_state() and pci_restore_state() are already done in the PCI core side, so we don't need to it doubly. Also, pci_enable_device(), pci_disable_device() and pci_set_master() calls in PM callbacks are superfluous nowadays, too, so get rid of them as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-04ALSA: emu10k1: Delete an unnecessary check before the function call "kfree"Markus Elfring
The kfree() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-02ALSA: emu10k1: Remove always NULL parametersLars-Peter Clausen
The various PCM and hwdep allocation functions in this driver take a pointer to a pointer of a PCM/hwdep where if this parameter is provided the newly allocated object is stored. All callers pass NULL though, so remove the parameter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-11ALSA: Fix invalid kerneldoc markersTakashi Iwai
They are no real kerneldoc comments, so drop such markers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-03ALSA: emu10k1: Deletion of unnecessary checks before three function callsMarkus Elfring
The functions kfree(), release_firmware() and snd_util_memhdr_free() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-21ALSA: emu10k1: Use snd_ctl_enum_info()Takashi Iwai
... and reduce the open codes. Also add missing const to text arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-10-14ALSA: emu10k1: Fix deadlock in synth voice lookupTakashi Iwai
The emu10k1 voice allocator takes voice_lock spinlock. When there is no empty stream available, it tries to release a voice used by synth, and calls get_synth_voice. The callback function, snd_emu10k1_synth_get_voice(), however, also takes the voice_lock, thus it deadlocks. The fix is simply removing the voice_lock holds in snd_emu10k1_synth_get_voice(), as this is always called in the spinlock context. Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-03-05ALSA: emu10k1: Fix possible NULL dereferenceTakashi Iwai
The previous dev_err() conversion resulted in a code that may give NULL dereference in snd_emu10k1_ptr_write(). Since it's a sanity check, better to be replaced with a debug macro like other places in this driver. Fixes: 6f002b02166c ('ALSA: emu10k1: Use standard printk helpers') Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: emu10k1: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-26ALSA: emu10k1x: Use standard printk helpersTakashi Iwai
Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-12ALSA: pci: Convert to snd_card_new() with a device pointerTakashi Iwai
Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-10-18ALSA: emu10k1: code refactoringGeyslan G. Bem
Partially restructures _snd_emu10k1_audigy_init_efx() and _snd_emu10k1_init_efx() functions. Be noted that the cast is demanded to use '__user'. So, in these cases, avoid patches based on the coccinelle 'drop_kmalloc_cast' semantic patch. Signed-off-by: Geyslan G. Bem <geyslan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-29ALSA: PCI: Remove superfluous pci_set_drvdata(pci, NULL) at removeTakashi Iwai
As drvdata is cleared to NULL at probe failure or at removal by the driver core, we don't have to call pci_set_drvdata(pci, NULL) any longer in each driver. The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in hda_intel.c. Since this function itself releases the card instance, we need to clear drvdata here as well, so that it won't be released doubly in the remove callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-24ALSA: emu10k1: Fix dock firmware loadingTakashi Iwai
The commit [b209c4df: ALSA: emu10k1: cache emu1010 firmware] broke the firmware loading of the dock, just (mistakenly) ignoring a different firmware for docks on some models. This patch revives them again. Bugzilla: https://bugs.archlinux.org/task/34865 Reported-and-tested-by: Tobias Powalowski <tobias.powalowski@googlemail.com> Cc: <stable@vger.kernel.org> [v3.8+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25ALSA: emu10k1: Allow to switch hardware sampe rate on EMUMihail Zenkov
Commit 57e5c63007955838043e34c732d224b2cbbb128f "emu10k1: allow to disable the SRC" force hardware use only one rate (48000 hz). EMU 0404/1010/1616 have support two hardware sampling rates (44100 and 48000 hz). This patch add check if we have EMU 0404/1010/1616 and choose correct sample rate to restrict. Signed-off-by: Mihail Zenkov <mihail.zenkov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-25ALSA: emu10k1: Load firmware when it was already cachedFlorian Zeitz
This expands the regression fix from d28215996b0c3a900411769039aa3c54cf7008ab. The firmware also needs to be loaded when it was already cached. Signed-off-by: Florian Zeitz <florob@babelmonkeys.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-22ALSA: emu10k1: Fix regression in emu1010 firmware loadingMihail Zenkov
This patch fix regression in emu1010 firmware loading after http://git.alsa-project.org/?p=alsa-kprivate.git;a=commitdiff;h=b209c4dfcd960ab176d4746ab7dc442a3edb4575 I just revert small part of this commit. Tested on emu1212m pci. Signed-off-by: Mihail Zenkov <mihail.zenkov@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
2012-12-07ALSA: pci: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22ALSA: emu10k1: Add missing ifdef for emu->suspend referenceTakashi Iwai
It's defined only for PM. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22ALSA: emu10k1: don't update firmware during suspend/resumeTakashi Iwai
Add a flag to suppress the update in emu1010_firmware_thread() during suspend/resume. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-22ALSA: emu10k1: cache emu1010 firmwareTakashi Iwai
Instead of calling request_firmware() at each time, keep the obtained firmware internally and reuse it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-19treewide: fix typo of "suppport" in various commentsMasanari Iida
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-10-17ALSA: emu10k1: add chip details for E-mu 1010 PCIe cardMaxim Kachur
Add chip details for E-mu 1010 PCIe card. It has the same chip as found in E-mu 1010b but it uses different PCI id. Signed-off-by: Maxim Kachur <mcdebugger@duganet.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-06sound: Remove unnecessary semicolonPeter Senna Tschudin
A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ statement S; position p,p1; @@ S@p1;@p @script:python r2@ p << r1.p; p1 << r1.p1; @@ if p[0].line != p1[0].line_end: cocci.include_match(False) @@ position r1.p; @@ -;@p // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-12ALSA: emu10k1x: Define channel mapsTakashi Iwai
Provide channel maps for individual stereo streams of emu10k1x. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-09-05ALSA: emu10k1: use list_move_tail instead of list_del/list_add_tailWei Yongjun
Using list_move_tail() instead of list_del() + list_add_tail(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEPTakashi Iwai
Otherwise we may get compile warnings due to unused functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-03ALSA: emu10k1: Avoid access to invalid pages when period=1Takashi Iwai
When period=1, the driver tries to allocate a bit bigger buffer than requested by the user due to the irq latency tolerance. This may lead to accesses over the actually allocated pages. This patch adds a check of the page index and assigns the silent page when it's over the given buffer size. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03ALSA: Convert to new pm_ops for PCI driversTakashi Iwai
Straightforward conversion to the new pm_ops from the legacy suspend/resume ops. Since we change vx222, vx_core and vxpocket have to be converted, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24ALSA: pci: clean up using module_pci_driver()Takashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-19 01:20:32 +0000