summaryrefslogtreecommitdiff
path: root/sound/pci
AgeCommit message (Collapse)Author
2013-02-13ALSA: hda - Increase badness for missing multi-ioTakashi Iwai
The current badness value used for the missing multi-io seems too weak, and the multi-io tends to be skipped for desktop configurations when no enough DACs are available. It's because the total badness of the multi-io becomes often larger than the badness with assigning an individual DAC to a headphone jack. This is good for one side, but it seems that the surround outputs are more demanded by that. This patch increases the badness value for the missing multi-io slightly so that the multi-io would be preferred than the individual headphone DAC if they conflict. Through the tests with hda-emu, mostly only desktop configurations with ALC662/663 and CMI codecs are affected by this change, and all look reasonable. Reported-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda - Fix broken workaround for HDMI/SPDIF conflictsTakashi Iwai
The commit [dcda58061: ALSA: hda - Add workaround for conflicting IEC958 controls] introduced a workaround for cards that have both SPDIF and HDMI devices for giving device=1 to SPDIF control elements. It turned out, however, that this workaround doesn't work well - - The workaround checks only conflicts in a single codec, but SPDIF and HDMI are provided by multiple codecs in many cases, and - ALSA mixer abstraction doesn't care about the device number in ctl elements, thus you'll get errors from amixer such as % amixer scontrols -c 0 ALSA lib simple_none.c:1551:(simple_add1) helem (MIXER,'IEC958 Playback Switch',0,1,0) appears twice or more amixer: Mixer hw:0 load error: Invalid argument This patch fixes the previous broken workaround. Instead of changing the device number of SPDIF ctl elements, shift the element indices of such controls up to 16. Also, the conflict check is performed over all codecs found on the bus. HDMI devices will be put to dev=0,index=0 as before. Only the conflicting SPDIF device is moved to a different place. The new place of SPDIF device is supposed by the updated alsa-lib HDA-Intel.conf, respectively. Reported-by: Stephan Raue <stephan@openelec.tv> Reported-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: <stable@vger.kernel.org> [v3.8] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda/ca0132 - Add missing \n to debug printsTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda/ca0132 - Fix type of INVALID_CHIP_ADDRESSTakashi Iwai
The chip address is 32bit long but INVALID_CHIP_ADDRESS is defined as an unsigned long. This makes dsp_chip_to_dsp_addx() misbehaving on 64bit architectures. Fix the INVALID_CHIP_ADDRESS definition to be 32bit. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda - update documentation for no-primary-hp fixupFernando Luis Vázquez Cao
The problem addressed by this fixup is not specific to Vaio Z, affecting some Vaio all-in-one desktop PCs too. Update the code comments accordingly. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda - Workaround for silent output on Sony Vaio VGC-LN51JGB with ALC889Fernando Luis Vázquez Cao
Some Vaio all-in-one desktop PCs (for example VGC-LN51JGB) are affected by the same issue that caused Vaio Z laptops to become silent: the speaker pin must be connected to the first DAC even though the codec itself advertises flexible routing through any of the DACs. Use the no-primary-hp fixup for choosing the speaker pin as the primary so that the right DAC is assigned on this device. Cc: stable@vger.kernel.org Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-11ALSA: ali5451: remove irq enabling in pointer callbackDenis Efremov
snd_ali_pointer function is called with local interrupts disabled. However it seems very strange to reenable them in such way. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-11ALSA: rme32.c irq enabling after spin_lock_irqDenis Efremov
According to the other code in this driver and similar code in rme96 it seems, that spin_lock_irq in snd_rme32_capture_close function should be paired with spin_unlock_irq. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-11ALSA: hda/ca0132 - Slight optimization for build with DSPTakashi Iwai
This reduces the resultant binary size. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-10ALSA: hda - Fix memory leak and error handling in CA0132 DSP loaderTakashi Iwai
This patch fixes a few obvious bugs in DSP loader stuff: - Fix possible memory leaks in the error path - Avoid double-free calls in dma_reset() - Properly set/unset WC bits for DMA buffers - Add missing error status checks Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-10ALSA: CA0132: Improve the DSP transfer timeout calculationsIan Minett
Base the DSP firmware transfer and communication timeouts on jiffy values. Signed-off-by: Ian Minett <ian_minett@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-10ALSA: hda_intel: Add Device IDs for Intel Wellsburg PCHJames Ralston
This patch adds the HD Audio Device IDs for the Intel Wellsburg PCH Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-08ALSA: hda - Yet another fix for broken HSW HDMI pin connectionsTakashi Iwai
A Haswell test machine showed that the invalid connection list, but this time it has only a single pin on the codec, thus the former fixup code doesn't work as it assumes the three pins blindly. This patch splits the former fixup code to two parts: - Enable eDP 1.2 for Haswell codec - Fix the connection list of pins on Haswell codec; the converter list is recorded dynamically in hdmi_add_cvt(), and applied in hdmi_add_pin() Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-08ALSA: hda - Add fixup for Haswell to enable all pin and convertor widgetsMengdong Lin
Some Haswell machines support more than one display outputs (HDMI or DP), but its BIOS may not enable the codec's 2nd and 3rd pin and output cvt widgets. This patch implements a board-specific fixup for Intel Haswell Machines: If the hidden pins are not enabled by BIOS, the driver will enable them and call common code to update the codec tree. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-08ALSA: hda - Support rereading widgets under the function groupMengdong Lin
A codec may allow software to hide some unused pin/cvt widgets. Sometimes BIOS does not enable the hidden widgets properly although they are needed for the board. Thus the driver need to enable them as a board-specific fixup and the whole tree will change. This patch implements a common code for rereading codec widgets. So the fixup code can call it after enabling the hidden widgets. Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-07ALSA: hda - Remove limit of widget connectionsTakashi Iwai
Currently we set the max number of connections to be 32, but there seems codec that gives longer connection lists like AD1988, and we see errors in proc output and else. (Though, in the case of AD1988, it's a list of all codecs connected to a single vendor widget, so this must be something fishy, but it's still valid from the h/w design POV.) This patch tries to remove this restriction. For efficiency, we still use the fixed size array in the parser, but takes a dynamic array when the size is reported to be greater than that. Now the fixed array size is found only in patch_hdmi.c, but it should be fine, as the codec itself can't support so many pins. Reported-by: Raymond Yau <superquad.vortex2@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-07ALSA: hda - Set non-snoop for Creative HD-audio controllersTakashi Iwai
... looks like we need this for stable operations. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-07ALSA: add missing HAS_IOPORT and GENERIC_HARDIRQS dependenciesHeiko Carstens
Fix these two compile errors on s390 which does not have HAS_IOPORT nor GENERIC_HARDIRQS: sound/pci/lx6464es/lx6464es.c: In function ‘snd_lx6464es_free’: sound/pci/lx6464es/lx6464es.c:565:2: error: implicit declaration of function ‘ioport_unmap’ sound/soc/codecs/wm8903.c: In function ‘wm8903_set_pdata_irq_trigger’: sound/soc/codecs/wm8903.c:1954:9: error: implicit declaration of function ‘irq_get_irq_data’ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-07ALSA: hda - Fix misc compile warnings in patch_ca0132.cTakashi Iwai
sound/pci/hda/patch_ca0132.c: In function ‘ca0132_is_vnode_effective’: sound/pci/hda/patch_ca0132.c:3331:15: warning: ‘nid’ may be used uninitialized in this function [-Wmaybe-uninitialized] sound/pci/hda/patch_ca0132.c:4345:13: warning: ‘ca0132_download_dsp’ defined but not used [-Wunused-function] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-07Merge branch 'topic/hda-ca0132-dsp' into for-nextTakashi Iwai
2013-02-07ALSA: hda - Use generic array for loopback list managementTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-07ALSA: hda - Enable loopback accounts for CONFIG_PM=n, tooTakashi Iwai
The loopback list is referred by the VIA codec driver no matter whether CONFIG_PM is set or not, thus we need to enable it always. Otherwise it gets compile errors. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-07ALSA: ice1712: fix boundary check in snd_wm8766_write()Dan Carpenter
The wm->regs[] array has WM8766_REG_COUNT (16) elements not WM8766_REG_RESET (31). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-06ALSA: hda - Apply mic-mute LED fixup for new HP laptopsTakashi Iwai
It's mostly harmless to apply it for new models even if they have no mic mute LED (just toggling an unused GPIO pin). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-05Merge branch 'for-linus' into for-nextTakashi Iwai
Merge pending fixes that haven't pulled into 3.8.
2013-02-05ALSA: hda - detect jacks on VT1708 even when no streams are activeDavid Henningsson
These days, GUIs such as Gnome sound settings want to be able to show the correct jack status even when no streams are currently running. I doubt this gives any measurable difference in power, but if it does, the "Jack Detect" control can still be used to turn polling off. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-05ALSA: hda - Fix phantom jacks on VT1708David Henningsson
The VT1708 has no unsol event capability, and polling is set using the "Jack Detect" alsamixer control. In order not to create phantom Jack controls, temporary enable jackpoll during build_controls. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-04ALSA: hda - Add new Kconfig CONFIG_SND_HDA_CODEC_CA0132_DSPTakashi Iwai
... to be less confusing for the update path. This new kconfig will choose CONFIG_SND_HDA_DSP_LOADER, which is basically a device-independent feature in hda_intel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-04ALSA: hda - Fix default multichannel HDMI mapping regressionAnssi Hannula
Commit d45e6889ee69456a4d5b1bbb32252f460cd48fa9 ("ALSA: hda - Provide the proper channel mapping for generic HDMI driver") added support for custom channel maps in the HDA HDMI driver. Due to a mistake in an 'if' condition the custom map is always used even when no such map has been set. This causes incorrect channel mapping for multichannel audio by default. Pass per_pin->chmap_set to hdmi_setup_channel_mapping() as a parameter so that it can use it for detecting if a custom map has been set instead of checking if map is NULL (which is never the case). Reported-by: Staffan Lindberg <pike@xbmc.org> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-01ALSA: hda - Release assigned pin/cvt at error path of hdmi_pcm_open()Takashi Iwai
If the driver detects and invalid ELD, it gives an open error. But it forgot to release the assigned pin, converter and spdif ctls before returning. Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-01ALSA - HDA: New PCI ID for Haswell ULTWang Xingchao
Add new PCI ID 0x0a0c for Haswell ULT platform. Signed-off-by: Wang Xingchao <xingchao.wang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-01ALSA: hda - add support for IDT 92HD95 HDA codecVitaliy Kulikov
Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-29ALSA: hda - Fix non-snoop page handlingTakashi Iwai
For non-snoop mode, we fiddle with the page attributes of CORB/RIRB and the position buffer, but also the ring buffers. The problem is that the current code blindly assumes that the buffer is contiguous. However, the ring buffers may be SG-buffers, thus a wrong vmapped address is passed there, leading to Oops. This patch fixes the handling for SG-buffers. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=800701 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-29ALSA: hda - Enable LPIB delay count for Poulsbo / OaktrailTakashi Iwai
Currently we use LPIB forcibly for both playback and capture for Poulsbo and Oaktrail devices, and this seems rather problematic. The recent fix for LPIB delay count seems working well with these devices, so let's enable it instead. Reported-by: Martin Weishart <martin.weishart@telosalliance.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-28ALSA: hda - Fix powermap for external mics on IDT codecsDavid Henningsson
This patch fixes a regression of the external mic not working on HP Probook 4520s. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-28ALSA: hda - fix inverted internal mic on Acer AOA150/ZG5David Henningsson
This patch enables internal mic input on the machine. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1107477 Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-25ALSA: Make snd_printd() and snd_printdd() inlineTakashi Iwai
Because currently snd_printd() and snd_printdd() macros are expanded to empty when CONFIG_SND_DEBUG=n, a compile warning like below appears sometimes, and we had to covert it by ugly ifdefs: sound/pci/hda/patch_sigmatel.c: In function ‘stac92hd71bxx_fixup_hp’: sound/pci/hda/patch_sigmatel.c:2434:24: warning: unused variable ‘spec’ [-Wunused-variable] For "fixing" these issues better, this patch replaces snd_printd() and snd_printdd() definitions with empty inline functions instead of macros. This should have the same effect but shut up warnings like above. But since we had already put ifdefs, changing to inline functions would trigger compile errors. So, such ifdefs is removed in this patch. In addition, snd_pci_quirk name field is defined only when CONFIG_SND_DEBUG_VERBOSE is set, and the reference to it in snd_printdd() argument triggers the build errors, too. For avoiding these errors, introduce a new macro snd_pci_quirk_name() that is defined no matter how the debug option is set. Reported-by: Stratos Karafotis <stratosk@semaphore.gr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-24ALSA: hda - Enable power down of unused widgets for IDT codecsTakashi Iwai
IDT codecs can work well with this new feature, so let's enable it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-24ALSA: hda - Implement path-based power filter to the generic parserTakashi Iwai
This patch adds a better power filter hook for powering down unused widgets in the generic parser. The feature is enabled by setting hda_gen_spec.power_down_unused flag. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-24ALSA: hda - Add snd_hda_check_power_state() helper functionTakashi Iwai
... for small refactoring. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-24ALSA: hda - Synchronize the power state at the end of codec initTakashi Iwai
Put the power state synchronization at the end of the parsing of codec. This is necessary when the power filter is changed during the codec probe. Since the first power-up sequence is performed without the special filter, all widgets are supposed to be ON at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-24ALSA: hda - Add power state filteringTakashi Iwai
Add a hook to struct hda_codec for filtering the target power state of each widget when powering up/down. The current hackish EAPD check is implemented as the default hook pointer, too. This allows codec drivers to implement own power filter. In the upcoming changes, the generic parser will have the better power filter based on the active paths. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-24ALSA: hda/via - Fix wrong checks of power state bitsTakashi Iwai
AC_VERB_GET_POWER_STATE returns the combined bits of the actual state and the target state. Thus, comparing the obtained value directly with the target value can't work. The value has to be shifted and masked properly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-24ALSA: hda - Fix wrong arguments for path deactivation checksTakashi Iwai
The arguments to call is_active_nid() in activate_amp() were swapped, and this resulted in the muted amp on some SPDIF output pins. Also, the index to be passed to is_active_nid() must be idx_to_check. Otherwise it checks the wrong connection in the case of implicit aamix connection paths. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23ALSA: hda - Add auto-mute support to PB desktopTakashi Iwai
Using the new chained_before flag, we can correct the headphone jack detection capability easily over the existing ALC880 6stack model (which disables the jack detection intentionally for compatibility reason). Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=901846 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23Merge branch 'for-linus' into for-nextTakashi Iwai
Merge the 3.8 devel branch for correcting the newly added PB desktop fixup with the automute support.
2013-01-23ALSA: hda - Add a fixup for Packard-Bell desktop with ALC880Takashi Iwai
A Packard-Bell desktop machine gives no proper pin configuration from BIOS. It's almost equivalent with the 6stack+fp standard config, just take the existing fixup. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=901846 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23ALSA: hda - Add chained_before flag to the fixup entryTakashi Iwai
Sometimes we want to call a fixup after applying other existing fixups, but currently the fixup chain mechanism allows only the call the others after the target fixup. This patch adds a new flag, chained_before, to struct hda_fixup, for allowing the chained call before the current execution. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23ALSA: hda - Small code refactoring about path re-initializationTakashi Iwai
Introduce a helper function to do the same thing. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-23ALSA: hda - Fix missing path between aamix and outputs in AD codecsTakashi Iwai
AD1988 family and AD1882 codecs have another mixer widget (0x21) between the analog-loopback mixer widget (0x20) and the actual outputs. Due to this hole, the analog-loopbacks aren't sent properly to the output pins. As a band-aid fix, introduce another fields holding the aamix merge path, and activate it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-18 17:54:47 +0000