summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/ssm2602.c
AgeCommit message (Collapse)Author
2015-08-05ASoC: ssm2602: Replace TLV_DB_RANGE_HEAD with DECLARE_TLV_DB_RANGELars-Peter Clausen
DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD() that it automatically calculates the number of items in the TLV and is hence less prone to manual error. Generate using the following coccinelle script // <smpl> @@ declarer name DECLARE_TLV_DB_RANGE; identifier tlv; constant x; @@ -unsigned int tlv[] = { - TLV_DB_RANGE_HEAD(x), +DECLARE_TLV_DB_RANGE(tlv, ... -}; +); // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-05Merge remote-tracking branches 'asoc/topic/simple', 'asoc/topic/ssm2518', ↵Mark Brown
'asoc/topic/ssm2602', 'asoc/topic/ssm4567' and 'asoc/topic/sta32x' into asoc-next
2015-05-04ASoC: ssm2602: Replace direct snd_soc_codec dapm field accessLars-Peter Clausen
The dapm field of the snd_soc_codec struct is eventually going to be removed, in preparation for this replace all manual access to codec->dapm with snd_soc_codec_get_dapm(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-27ASoC: Move bias level update to the coreLars-Peter Clausen
All drivers have the same line at the end of the set_bias_level callback to update the bias_level state. Move this update into snd_soc_dapm_force_bias_level() and remove them from the drivers. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-06Merge remote-tracking branches 'asoc/topic/simple', 'asoc/topic/sirf', ↵Mark Brown
'asoc/topic/spdif', 'asoc/topic/ssm2602' and 'asoc/topic/ssm4567' into asoc-next
2014-10-06Merge remote-tracking branches 'asoc/topic/davinci', 'asoc/topic/dmic', ↵Mark Brown
'asoc/topic/drivers', 'asoc/topic/es8328' and 'asoc/topic/fsl' into asoc-next
2014-09-30ASoC: ssm2602: add support for 11.025kHz and 22.5kHz sample ratesStefan Kristiansson
This adds the necessary values to the constraint list and register values to the coefficient table in order to configure the device for 11.025kHz and 22.5kHz sample rates. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-30ASoC: ssm2602: do not hardcode type to SSM2602Stefan Kristiansson
The correct type (SSM2602/SSM2603/SSM2604) is passed down from the ssm2602_spi_probe()/ssm2602_spi_probe() functions, so use that instead of hardcoding it to SSM2602 in ssm2602_probe(). Fixes: c924dc68f737 ("ASoC: ssm2602: Split SPI and I2C code into different modules") Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Cc: stable@vger.kernel.org
2014-09-04ASoC: ssm2602: Cleanup manual bias level transitionsLars-Peter Clausen
Set the CODEC driver's suspend_bias_off flag rather than manually going to SND_SOC_BIAS_OFF in suspend and SND_SOC_BIAS_STANDBY in resume. This makes the code a bit shorter and cleaner. While we are at it also remove the regcache_cache_only() calls from suspend/resume as there shouldn't be any IO between suspend and resume. Since the ASoC core now takes care of setting the bias level to SND_SOC_BIAS_OFF when removing the CODEC there is no need to do it manually anymore either. The manual transition to SND_SOC_BIAS_STANDBY at the end of CODEC probe() can also be removed as the core will automatically do this after the CODEC has been probed. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-07-31ASoC: ssm2602: Convert to params_width()Mark Brown
The CODEC doesn't care how data is laid out in memory. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Lars-Peter Clausen <lars@metafoo.de>
2014-03-13Merge remote-tracking branch 'asoc/topic/io' into asoc-nextMark Brown
2014-03-11ASoC: codec: Simplify ASoC probe code.Xiubo Li
For some CODEC drivers like who act as the MFDs children are ignored by this patch. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-20ASoC: ssm2602: Omit superfluous elements in input select arrayTakashi Iwai
The array contains too many elements although it should have only two. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-18ASoC: ssm2602: Split SPI and I2C code into different modulesLars-Peter Clausen
There are a few known (minor) problems with having the support code for both I2C and SPI in the same module: * We need to be extra careful to make sure to not build the driver into the kernel if one of the subsystems is build as a module (Currently only I2C can be build as a module). * The module init path error handling is rather ugly. E.g. what should be done if either the SPI or the I2C driver fails to register? Most drivers that implement SPI and I2C in the same module currently fallback to undefined behavior in that case. Splitting the the driver into two modules, one for each bus allows the registration of the other bus driver to continue without problems if one of them fails. This patch splits the ssm2602 driver into 3 modules. One core module that implements the device logic, but is independent of the bus method used. And one module for SPI and I2C each that registers the drivers and sets up the regmap struct for the bus. While we are at it also cleanup the include section of the ssm2602 driver and remove unneeded includes. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-07ASoC: ssm2602: Constify rate constraintsLars-Peter Clausen
The rate constraints in this driver are shared between all device instances. It should not be (and is not) modified at runtime, so make them const. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-08ASoC: ssm2602: add 16kHz sampling rate supportAndreas Pretzsch
SSM260x also supports 16kHz with external master clocks of 12.000MHz, 12.288MHz and 18.432MHz. Add matching coefficients, update constraints and announced rates. Signed-off-by: Andreas Pretzsch <apr@cn-eng.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-03ASoC: ssm2602: Use core for applying symmetry constraintsLars-Peter Clausen
Let the core take care of applying sample rate and sample bits constraints instead of open-coding this in the driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-11-27ASoC: ssm2602: Use IS_ENABLED() macroFabio Estevam
Using the IS_ENABLED() macro can make the code shorter and simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-08-31ASoC: ssm2602: Fix cache syncLars-Peter Clausen
The ssm2602 uses regmap for caching not soc-cache, so we need to use regcache_sync() instead of snd_soc_cache_sync(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2012-12-10ASoC: codecs: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-25ASoC: SSM2602: Convert to direct regmap API usageLars-Peter Clausen
Mostly a one to one converion. On one occasion the patch replaces a snd_soc_read-snd_soc_write sequence with regmap_update_bits though as it helps to keep the conversion simple. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-25ASoC: SSM2602: Remove driver specific versionLars-Peter Clausen
We have never really updated that version number and probably never will, so just remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-25ASoC: SSM2602: Add sysclk based rate constraintsLars-Peter Clausen
Not all advertised rates are available for all sysclk frequencies. Add additional sysclk based rate constraints. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-04ASoC: codecs: Remove rtd->codec usage from CODEC driversMark Brown
In order to support CODEC<->CODEC links remove the assumption that there is only a single CODEC on a DAI link by removing the use of the CODEC pointer in the rtd from the CODEC drivers. They are already being passed their DAI whenever they are passed an rtd and can get the CODEC from there. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-04ASoC: core: Add support for DAI and machine kcontrols.Liam Girdwood
Currently ASoC can only add kcontrols using codec and platform component device handles. It's also desirable to add kcontrols for DAIs (i.e. McBSP) and for SoC card machine drivers too. This allows the kcontrol to have a direct handle to the parent ASoC component DAI/SoC Card/Platform/Codec device and hence easily get it's private data. This change makes snd_soc_add_controls() static and wraps it in the folowing calls (card and dai are new) :- snd_soc_add_card_controls() snd_soc_add_codec_controls() snd_soc_add_dai_controls() snd_soc_add_platform_controls() This patch also does a lot of small mechanical changes in individual codec drivers to replace snd_soc_add_controls() with snd_soc_add_codec_controls(). It also updates the McBSP DAI driver to use snd_soc_add_dai_controls(). Finally, it updates the existing machine drivers that register controls to either :- 1) Use snd_soc_add_card_controls() where no direct codec control is required. 2) Use snd_soc_add_codec_controls() where there is direct codec control. In the case of 1) above we also update the machine drivers to get the correct component data pointers from the kcontrol (rather than getting the machine pointer via the codec pointer). Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02ASoC: Convert ssm2602 to devm_kzalloc()Axel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-12-02ASoC: Drop unused state parameter from CODEC suspend callbackLars-Peter Clausen
The existence of this parameter is purely historical. None of the CODEC drivers uses it and we always pass in the same value anyway, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-27ASoC: Remove unneeded platform_device.h inclusions from CODECsMark Brown
They've not been needed for a long time if they were ever required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23ASoC: Constify snd_soc_dai_ops structsLars-Peter Clausen
Commit 1ee46ebd("ASoC: Make the DAI ops constant in the DAI structure") introduced the possibility to have constant DAI ops structures, yet this is barley used in both existing drivers and also new drivers being submitted, although none of them modifies its DAI ops structure. The later is not surprising since existing drivers are often used as templates for new drivers. So this patch just constifies all existing snd_soc_dai_ops structs to eliminate the issue altogether. The patch was generated with the following coccinelle semantic patch: // <smpl> @@ identifier ops; @@ -struct snd_soc_dai_ops ops = +const struct snd_soc_dai_ops ops = { ... }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-19ASoC: ssm2602: Use snd_soc_update_bits for read-modify-writeAxel Lin
Use snd_soc_update_bits for read-modify-write register access instead of open-coding it using snd_soc_read and snd_soc_write Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: ssm2602: Support setting the oscillator and the clock output stateLars-Peter Clausen
Currently the oscillator is always enabled and the clock output is always disabled. This patch adds support for controlling the oscillator and clock output state through snd_soc_dai_set_sysclk. Which makes it possible to disable or enable them dynamically according to the requirements of the board on which the CODEC is used. This patch also slightly modifies the behavior as to when the oscillator is going to be disabled in low-power states. Previously it would only be disabled in BIAS_OFF, now it is also going to be disabled in BIAS_STANDBY, since no components which depend on it should be active in this state. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27ASoC: ssm2602: Set initial bias level to standbyLars-Peter Clausen
Set the initial bias level to standby during CODEC probe instead of leaving the CODEC powered off. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-27Merge branch 'for-3.1' into for-3.2Mark Brown
2011-09-27ASoC: ssm2602: Re-enable oscillator after suspendLars-Peter Clausen
Currently the the internal oscillator is powered down when entering BIAS_OFF state, but not re-enabled when going back to BIAS_STANDBY. As a result the CODEC will stop working after suspend if the internal oscillator is used to generate the sysclock signal. This patch fixes it by clearing the appropriate bit in the power down register when the CODEC is re-enabled. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-09-20ASoC: ssm2602: Do not dereference codec->control_dataLars-Peter Clausen
The driver assumes that control_data points to the drivers i2c_client struct, but this is no longer the case since the ASoC core has switched to regmap. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-11ASoC: Fix NULL vs. 0 warning in SSM2602Mark Brown
sparse complains if 0 is used as a NULL pointer constant. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com>
2011-05-09ASoC: SSM2602: Provide dB ranges for the volume controlsLars-Peter Clausen
Also fix the maximum value for the capture volume control. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-09ASoC: SSM2602: Model power supply for the digital core as a DAPM widgetLars-Peter Clausen
Model the power supply for the digital core as a DAPM_SUPPLY widget. This allows to cleanup the code a bit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-09ASoC: SSM2602: Add entry for the ssm2603 to the device id tableLars-Peter Clausen
The SSM2603 is mostly register compatible with the SSM2602 and can be supported by the current driver without any changes. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-09ASoC: SSM2602: Add SSM2604 supportLars-Peter Clausen
The SSM2604 is basically a lightweight variant of the SSM2602 with a compatible register layout. Thus we can easily support both devices by the same driver, by providing a slightly set of controls, widgets and routes. Compared to the SSM2602 the SSM2604 has no microphone input and no headphone output. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-09ASoC: SSM2602: Do not power the codec up in probeLars-Peter Clausen
It is not required to have the codec powered at this stage and DAPM will power the ADC and DAC down again after probe has run anyway. Thus we avoid some unnecessary writes by this change. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-09ASoC: SSM2602: Fix default register cacheLars-Peter Clausen
Some of the values in the default register cache did not represent the codecs state after reset. This patch fixes it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-08ASoC: SSM2602: Remove duplicate controlLars-Peter Clausen
There are currently two controls which allow selecting the capture source, one as a normal control, the other as part of a DAPM_MUX widget. Remove the normal control. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-08ASoC: SSM2602: Cleanup coeff handlingLars-Peter Clausen
Drop unused field from the coeff struct, precalculate the srate register at compile-time and cleanup up the naming. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-08Merge branch 'for-2.6.39' into for-2.6.40Mark Brown
2011-05-08ASoC: SSM2602: Fix reg_cache_sizeLars-Peter Clausen
reg_cache_size is supposed to be the number of elements in the register cache, not the size in bytes. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-05-08ASoC: SSM2602: Fix 'Mic Boost2' controlLars-Peter Clausen
The 'Mic Boost2' control's shift was off by one and thus was not working. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-05-08ASoC: SSM2602: Properly annotate i2c probe and remove functionsLars-Peter Clausen
Annotate the i2c probe and remove functions with __devinit and __devexit. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-04-08ASoC: SSM2602: add SPI supportMike Frysinger
The ssm2602 codec has a SPI interface as well as I2C, so add the simple bit of glue to make it usable. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-30ASoC: SSM2602: convert to soc-cacheCliff Cai
Signed-off-by: Cliff Cai <cliff.cai@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-20 18:38:33 +0000