summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2010-01-28ASoC: fix a memory-leak in wm8903Guennadi Liakhovetski
commit 40aa7030e5213a43e9e0554fd7f95534ea310bf3 upstream. Remember to free the temporary register-cache. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-18ASoC: Fix WM8350 DSP mode B configurationMark Brown
commit 5ee518ecbcb5934e284ea51a19a939c891f5f7ea upstream. We need to set the LRCLK inversion bit to select DSP mode. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-18ASoC: fix params_rate() macro use in several codecsGuennadi Liakhovetski
commit b3172f222ab5afdc91ea058bd11c42cf169728f3 upstream. Sevelar ASoC codec drivers wrongly assume, that the params_rate() macro returns one of SNDRV_PCM_RATE_* defines instead of the actual numerical sampling rate. Fix them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-06ASoC: Do not write to invalid registers on the wm9712.Eric Millbrandt
commit 48e3cbb3f67a27d9c2db075f3d0f700246c40caa upstream. This patch fixes a bug where "virtual" registers were being written to the ac97 bus. This was causing unrelated registers to become corrupted (headphone 0x04, touchscreen 0x78, etc). This patch duplicates protection that was included in the wm9713 driver. Signed-off-by: Eric Millbrandt <emillbrandt@dekaresearch.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-06ASoC: wm8974: fix a wrong bit definitionGuennadi Liakhovetski
commit 48c03ce72f2665f79a3fe54fc6d71b8cc3d30803 upstream. The wm8974 datasheet defines BUFIOEN as bit 2. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-27ASoC: AIC23: Fixing infinite loop in resume pathAnuj Aggarwal
This patch fixes two issues: a) Infinite loop in resume function b) Writes to non-existing registers in resume function Cc: stable@kernel.org Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-11-18ASoC: tlv320aic23 fix rate selectionTroy Kisky
Fix the ordering of sr_valid_mask array. The lower bit of the index represents USB not bosr. Reported-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-10-06Merge branch 'upstream/wm8350' into for-2.6.32Mark Brown
2009-10-06ASoC: WM8350 capture PGA mutes are invertedMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-10-06Merge branch 'for-2.6.32' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into for-2.6.32
2009-10-02ASoC: wm8940: Fix check on error code form snd_soc_codec_set_cache_ioJonathan Cameron
Fix for typo in commit 8d50e447d19fec64adebeef55f2b60d695435412 ASoC: Factor out I/O for Wolfson 8 bit data 16 bit register CODECs Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-23Merge branch 'fix/asoc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: wm8753: fix mapping when MONOMIX is set to Stereo ASoC: some minor changes for AD1836 and AD1938 codec drivers ASoC: DaVinci: Fixes to McASP configuration ASoC: Blackfin I2S: fix resuming when device hasn't been used ASoC: Blackfin I2S: add lost platform_device parameter to resume function ASoC: fix typos in Blackfin headers ASoC: bf5xx-sport: the irq save/restore funcs take an unsigned long ASoC: Blackfin AC97: add a few missing multichannel define handling
2009-09-21ASoC: wm8753: fix mapping when MONOMIX is set to StereoPhil Vandry
When MONOMIX is set to Stereo, Left PGA was not powered on but should be. Add a mapping from Capture Left Mux to Capture Left Mixer to fix the issue. Signed-off-by: Phil Vandry <vandry@TZoNE.ORG> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-21ASoC: some minor changes for AD1836 and AD1938 codec driversBarry Song
1. delete redundant assignment to bus field in spi_driver structure 2. fix lost assignment to set_bias_level entry in ad1938 codec dai 3. change spi driver name of ad1836 from "ad1836-spi" to "ad1836" Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-21trivial: remove unnecessary semicolonsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-17Merge branch 'fix/asoc' into for-linusTakashi Iwai
* fix/asoc: ASoC: remove unused #include <linux/version.h> ASoC: S3C lrsync function made to work with IRQs disabled. ASoC: Fix display of stream name in DAPM debugfs ASoC: Clean up error handling in MPC5200 DMA setup
2009-09-16ASoC: remove unused #include <linux/version.h>Huang Weiyi
Remove unused #include <linux/version.h>('s) in sound/soc/codecs/ad1836.c sound/soc/codecs/ad1938.c sound/soc/codecs/wm8974.c Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-10Merge branch 'topic/asoc' into for-linusTakashi Iwai
* topic/asoc: (226 commits) ASoC: au1x: PSC-AC97 bugfixes ASoC: Fix WM835x Out4 capture enumeration ASoC: Remove unuused hw_read_t ASoC: fix pxa2xx-ac97.c breakage ASoC: Fully specify DC servo bits to update in wm_hubs ASoC: Debugged improper setting of PLL fields in WM8580 driver ASoC: new board driver to connect bfin-5xx with ad1836 codec ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI ASoC: davinci: i2c device creation moved into board files ASoC: Don't reconfigure WM8350 FLL if not needed ASoC: Fix s3c-i2s-v2 build ASoC: Make platform data optional for TLV320AIC3x ASoC: Add S3C24xx dependencies for Simtec machines ASoC: SDP3430: Fix TWL GPIO6 pin mux request ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI OMAP: McBSP: Use textual values in DMA operating mode sysfs files ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510 ASoC: Select core DMA when building for S3C64xx ...
2009-09-07ASoC: Fix WM835x Out4 capture enumerationMark Brown
It's the 8th enum of a zero indexed array. This is why I don't let new drivers use these arrays of enums... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2009-09-02ASoC: Fully specify DC servo bits to update in wm_hubsMark Brown
Avoids potential issues if we read back unexpected values during a read/modify/write cycle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-09-01ASoC: Debugged improper setting of PLL fields in WM8580 driverjassi brar
Bug was caught while trying to use WM8580 as I2S master on SMDK. Symptoms were lesser LRCLK read by CRO(41.02 instead of 44.1 KHz) Solved by referring to WM8580A manual and setting mask value correctly and making the code to not touch 'reserved' bits of PLL4 register. Signed-off-by: Jassi <jassi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-26ASoC: Don't reconfigure WM8350 FLL if not neededMark Brown
If the requested FLL configuration is the one we're currently running in it's at best pointless to reconfigure the FLL. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-26ASoC: Make platform data optional for TLV320AIC3xMark Brown
Now that we don't need the I2C address for the device the platform data is redundant so allow it to be omitted. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Chaithrika U S <chaithrika@ti.com>
2009-08-24Merge branch 'topic/digital-mixing' into for-2.6.32Mark Brown
2009-08-24ASoC: Remove unneeded inclusion of linux/regulator/consumer.hTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-23ASoC: free socdev if init_card() fails in wm9705_soc_probe()Roel Kluin
Free socdev if snd_soc_init_card() fails. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: Add ak4642/ak4643 codec supportKuninori Morimoto
This is very simple driver for ALSA It supprt headphone output and stereo input only This patch is tested by ms7724se Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-21ASoC: tlv320aic3x: Change to use device modelBen Dooks
The tlv320aic3x driver managed its own i2c device, instead of an extant one created by the board support code. Change the code to make it so that the driver binds to an extant (in this case i2c) device. Add explict tlv320aic33 as well as tlv320aic3x to the supported device table and remove the old driver bindings from the users of this code. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-18ASoC: WM8993 digital mixing supportMark Brown
The WM8993 provides digital sidetone paths and also allows each channel on the audio interface to be routed separtately to the DACs and ADCs. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-18ASoC: Remove duplicate ADC/DAC widgets from wm_hubs.cMark Brown
These need to be in the CODEC since the DAIs supported by the CODECs aren't static. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17ASoC: Implement TDM configuration for WM8993Mark Brown
Note that the number of slots used internally is specified in terms of stereo slots while the external API works with mono slots. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17ASoC: Fix WM8993 MCLK configuration for high frequency MCLKsMark Brown
When used without the PLL we were accidentally clearing the MCLK/2 divider, resulting in a double rate SYSCLK when the divider should have been used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-17ASoC: UDA134X: Fix mistaken mute/unmute codeShine Liu
There is a mistake in current uda134x_mute function: mute_reg has been changed in line 162 or line 164, so uda134x_write should write "mute_reg" but not "mute_reg & ~(1<<2)" to UDA134X_DATA010. Signed-off-by: Shine Liu <shinel@foxmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15ASoC: Factor out cache I/O from WM8974Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-15Merge branch 'wm8974-upstream' into for-2.6.32Mark Brown
2009-08-14ASoC: delete -spi suffix in ad1938 and free private data while registers failBarry Song
Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-14ASoC: TWL4030: Fix for capture mixer stringsPeter Ujfalusi
Change the strings related to capture in order to be interpreted correctly by alsamixer and possible other UI based mixer applications. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: Factor out shared code from WM8993Mark Brown
The WM8993 analogue control is shared with other devices in the same product line. Since this is a very substantial proportion of the driver move the definitions of these controls into a new wm_hubs module which allows them to be shared between the two. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: Minor cleanups to AD1938 driverMark Brown
- Build in SND_SOC_ALL_CODECS. - Remove null suspend/resume stuff. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13new ad1836 codec driver based on asocBarry Song
There has been an ad1836 driver in sound/blackfin based on traditional alsa. The new driver is based on asoc. The architecture of ad1836 codec driver is very much like ad1938. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: TWL4030: Introduce PGAs for outputsPeter Ujfalusi
Dynamically control and control only the needed output amplifier muting/un-muting. The original code was muting and un-muting the following output amplifiers: Earpiece PreDrivL/R, CarkitL/R at the same time regardless which pin is actually in use at the given moment. Move these as separate PGA so only the needed amplifier will be touched. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-13ASoC: add output/input widgets in ad1938 to make dac/adc dynamic PM workBarry Song
According to the function dapm_dac_check_power() in sound/soc/soc-dapm.c, dac power can't be on/off stand-alone without any output widget as sink. And according to dapm_adc_check_power(), adc power can't be on/off stand-alone without any input widget as source. So we can't only define some stand-alone SND_SOC_DAPM_DAC/SND_SOC_DAPM_ADC to hope their power can be managed dynamically. Signed-off-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-12ASoC: Update AD1938 for new TDM slot APIMark Brown
It's only actually paying attention to the slot count anyway. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-11ASoC: Update WM9081 for tdm_slot() API changeMark Brown
Store the TDM slot width then if it's set use that rather than the sample size to calculate BCLK. Leave imposing constraints to the core (which should do this but doesn't yet) or machine driver. Also allow 0 TDM slots to be configure (for use when disabling TDM). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-11Merge commit 'a5479e389e989acfeca9c32eeb0083d086202280' into for-2.6.32Mark Brown
2009-08-10ASoC: Drop unneeded declaration of removed wm8731 SPI write functionMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-08ASoC: Convert WM8776 to use factored out register cache codeMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-07Merge branch 'reg-cache' into for-2.6.32Mark Brown
2009-08-06ASoC: change set_tdm_slot api to allow slot_width override.Daniel Ribeiro
Extend set_tdm_slot to allow the user to arbitrarily set the frame width and active TX/RX slots. Updates magician.c and wm9081.c for the new set_tdm_slot(). wm9081.c still doesn't handle the slot_width override. While being there, correct an incorrect use of SlotsPerFrm(7) use in bitmask on pxa-ssp.c (SSCR0_SlotsPerFrm(x) is (((x) - 1) << 24)) ). (this series is meant for Mark's for-2.6.32 branch) Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-08-06ASoC: CX20442: simplify codec controller usageJanusz Krzysztofik
This patch is a workaround for the problem of several subsequent control statements not being applied correctly to the codec controller (modem). In order to follow the hook switch state change from handset to handsfree while in full duplex mode, two consecutive +VLS control commands were sent to the modem. The first one was M1 (microphone only), the seconds one was M1S1 (both microphone and speaker). As there was no real modem handshaking procedure implemented, neither in the codec nor in the machine driver part of the line discipline, the modem was having the second command missed. Since a possibility to switch to microphone only mode (and speaker only mode as well) seams of no value, I have modified the code to issue single M1S1 command only for any of those cases. Tested on my Amstrad Delta. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 17:13:11 +0000