summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2022-12-23ASoC: wm8904: fix wrong outputs volume after power reactivationEmanuele Ghidoli
Restore volume after charge pump and PGA activation to ensure that volume settings are correctly applied when re-enabling codec from SND_SOC_BIAS_OFF state. CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration affect how the volume register are applied and must be configured first. Upstream-Status: Submitted [https://lore.kernel.org/all/20221223080247.7258-1-francesco@dolcini.it/] Fixes: a91eb199e4dc ("ASoC: Initial WM8904 CODEC driver") Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/ Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> [ ghidoli: for backport use snd_soc_component_read32() instead of snd_soc_component_read() as required before commit cf6e26c71bfd ("ASoC: soc-component: merge snd_soc_component_read() and snd_soc_component_read32()") ] Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
2022-06-24ASoC: sgtl5000: Fix noise on shutdown/removeFrancesco Dolcini
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is required since the SGTL5000 produces a constant noise on its output after it is configured and its clock is removed. Without this change this is happening every time the module is unbound/removed or from reboot till the clock is enabled again. The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can be easily reproduced everywhere just playing something on the codec and after that removing/unbinding the driver. Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2022-05-19Merge remote-tracking branch 'gh-fslc/5.4-2.3.x-imx' into toradex_5.4-2.3.x-imxPhilippe Schenker
2022-05-19Merge tag 'v5.4.193' into update-to-2.3.7__5.4-2.3.x-imxPhilippe Schenker
This is the 5.4.193 stable release Conflicts: arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts drivers/edac/synopsys_edac.c drivers/mmc/host/sdhci-esdhc-imx.c drivers/mmc/host/sdhci.c drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c sound/soc/codecs/msm8916-wcd-analog.c
2022-05-12ASoC: wm8958: Fix change notifications for DSP controlsMark Brown
commit b4f5c6b2e52b27462c0599e64e96e53b58438de1 upstream. The WM8958 DSP controls all return 0 on successful write, not a boolean value indicating if the write changed the value of the control. Fix this by returning 1 after a change, there is already a check at the start of each put() that skips the function in the case that there is no change. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220416125408.197440-1-broonie@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12ASoC: da7219: Fix change notifications for tone generator frequencyMark Brown
commit 08ef48404965cfef99343d6bbbcf75b88c74aa0e upstream. The tone generator frequency control just returns 0 on successful write, not a boolean value indicating if there was a change or not. Compare what was written with the value that was there previously so that notifications are generated appropriately when the value changes. Signed-off-by: Mark Brown <broonie@kernel.org> Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220420133437.569229-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-09ASoC: wm8731: Disable the regulator when probing failsZheyu Ma
[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ] When the driver fails during probing, the driver should disable the regulator, not just handle it in wm8731_hw_init(). The following log reveals it: [ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 17.824467] Call Trace: [ 17.824774] <TASK> [ 17.825040] regulator_bulk_free+0x82/0xe0 [ 17.825514] devres_release_group+0x319/0x3d0 [ 17.825882] i2c_device_probe+0x766/0x940 [ 17.829198] i2c_register_driver+0xb5/0x130 Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27ASoC: msm8916-wcd-digital: Check failure for devm_snd_soc_register_componentMiaoqian Lin
[ Upstream commit e927b05f3cc20de87f6b7d912a5bbe556931caca ] devm_snd_soc_register_component() may fails, we should check the error and do the corresponding error handling. Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220403115239.30140-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15ASoC: mediatek: mt6358: add missing EXPORT_SYMBOLsJiaxin Yu
commit a7663c89f4193dbf717572e46e5a3251940dbdc8 upstream. Fixes the following build errors when mt6358 is configured as module: >> ERROR: modpost: "mt6358_set_mtkaif_protocol" >> [sound/soc/mediatek/mt8186/mt8186-mt6366-rt1019-rt5682s.ko] undefined! >> ERROR: modpost: "mt6358_set_mtkaif_protocol" >> [sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.ko] undefined! Fixes: 6a8d4198ca80 ("ASoC: mediatek: mt6358: add codec driver") Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220319120325.11882-1-jiaxin.yu@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15ASoC: madera: Add dependencies on MFDCharles Keepax
[ Upstream commit ec29170c724ca30305fc3a19ba2ee73ecac65509 ] The Madera CODECs use regmap_irq functions but nothing ensures that regmap_irq is built into the kernel. Add dependencies on the ASoC symbols for the relevant MFD component. There is no point in building the ASoC driver if the MFD doesn't support it and the MFD part contains the necessary dependencies to ensure everything is built into the kernel. Reported-by: Mark Brown <broonie@kernel.org> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220203115025.16464-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15ASoC: msm8916-wcd-analog: Fix error handling in pm8916_wcd_analog_spmi_probeMiaoqian Lin
[ Upstream commit 9ebd62d60edcd4d9c75485e5ccd0b79581ad3c49 ] In the error handling path, the clk_prepare_enable() function call should be balanced by a corresponding 'clk_disable_unprepare()' call , as already done in the remove function. Fixes: de66b3455023 ("ASoC: codecs: msm8916-wcd-analog: add MBHC support") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220316041924.17560-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in ↵Miaoqian Lin
msm8916_wcd_digital_probe [ Upstream commit 375a347da4889f64d86e1ab7f4e6702b6e9bf299 ] Fix the missing clk_disable_unprepare() before return from msm8916_wcd_digital_probe in the error handling case. Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220307084523.28687-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15ASoC: wm8350: Handle error for wm8350_register_irqJiasheng Jiang
[ Upstream commit db0350da8084ad549bca16cc0486c11cc70a1f9b ] As the potential failure of the wm8350_register_irq(), it should be better to check it and return error if fails. Also, use 'free_' in order to avoid the same code. Fixes: a6ba2b2dabb5 ("ASoC: Implement WM8350 headphone jack detection") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220304023821.391936-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-15ASoC: rt5663: check the return value of devm_kzalloc() in rt5663_parse_dp()Jia-Ju Bai
[ Upstream commit 4d06f92f38b799295ae22c98be7a20cac3e2a1a7 ] The function devm_kzalloc() in rt5663_parse_dp() can fail, so its return value should be checked. Fixes: 457c25efc592 ("ASoC: rt5663: Add the function of impedance sensing") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20220225131030.27248-1-baijiaju1990@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08ASoC: cs4265: Fix the duplicated control nameFabio Estevam
commit c5487b9cdea5c1ede38a7ec94db0fc59963c8e86 upstream. Currently, the following error messages are seen during boot: asoc-simple-card sound: control 2:0:0:SPDIF Switch:0 is already present cs4265 1-004f: ASoC: failed to add widget SPDIF dapm kcontrol SPDIF Switch: -16 Quoting Mark Brown: "The driver is just plain buggy, it defines both a regular SPIDF Switch control and a SND_SOC_DAPM_SWITCH() called SPDIF both of which will create an identically named control, it can never have loaded without error. One or both of those has to be renamed or they need to be merged into one thing." Fix the duplicated control name by combining the two SPDIF controls here and move the register bits onto the DAPM widget and have DAPM control them. Fixes: f853d6b3ba34 ("ASoC: cs4265: Add a S/PDIF enable switch") Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220215120514.1760628-1-festevam@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08ASoC: rt5682: do not block workqueue if card is unboundKai Vehmanen
[ Upstream commit 4c33de0673ced9c7c37b3bbd9bfe0fda72340b2a ] The current rt5682_jack_detect_handler() assumes the component and card will always show up and implements an infinite usleep loop waiting for them to show up. This does not hold true if a codec interrupt (or other event) occurs when the card is unbound. The codec driver's remove or shutdown functions cannot cancel the workqueue due to the wait loop. As a result, code can either end up blocking the workqueue, or hit a kernel oops when the card is freed. Fix the issue by rescheduling the jack detect handler in case the card is not ready. In case card never shows up, the shutdown/remove/suspend calls can now cancel the detect task. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20220207153000.3452802-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-03-08ASoC: rt5668: do not block workqueue if card is unboundKai Vehmanen
[ Upstream commit a6d78661dc903d90a327892bbc34268f3a5f4b9c ] The current rt5668_jack_detect_handler() assumes the component and card will always show up and implements an infinite usleep loop waiting for them to show up. This does not hold true if a codec interrupt (or other event) occurs when the card is unbound. The codec driver's remove or shutdown functions cannot cancel the workqueue due to the wait loop. As a result, code can either end up blocking the workqueue, or hit a kernel oops when the card is freed. Fix the issue by rescheduling the jack detect handler in case the card is not ready. In case card never shows up, the shutdown/remove/suspend calls can now cancel the detect task. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20220207153000.3452802-2-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-08ASoC: max9759: fix underflow in speaker_gain_control_put()Dan Carpenter
commit 4c907bcd9dcd233da6707059d777ab389dcbd964 upstream. Check for negative values of "priv->gain" to prevent an out of bounds access. The concern is that these might come from the user via: -> snd_ctl_elem_write_user() -> snd_ctl_elem_write() -> kctl->put() Fixes: fa8d915172b8 ("ASoC: max9759: Add Amplifier Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220119123101.GA9509@kili Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08ASoC: cpcap: Check for NULL pointer after calling of_get_child_by_nameJiasheng Jiang
commit f7a6021aaf02088870559f82fc13c58cda7fea1a upstream. If the device does not exist, of_get_child_by_name() will return NULL pointer. And devm_snd_soc_register_component() does not check it. Also, I have noticed that cpcap_codec_driver has not been used yet. Therefore, it should be better to check it in order to avoid the future dereference of the NULL pointer. Fixes: f6cdf2d3445d ("ASoC: cpcap: new codec") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-27ASoC: rt5663: Handle device_property_read_u32_array error codesJiasheng Jiang
[ Upstream commit 2167c0b205960607fb136b4bb3c556a62be1569a ] The return value of device_property_read_u32_array() is not always 0. To catch the exception in case that devm_kzalloc failed and the rt5663->imp_table was NULL, which caused the failure of device_property_read_u32_array. Fixes: 450f0f6a8fb4 ("ASoC: rt5663: Add the manual offset field to compensate the DC offset") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20211215031550.70702-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-12Merge remote-tracking branch 'fscl/5.4-2.3.x-imx' into ↵Denys Drozdov
toradex_5.4-2.3.x-imx-v5.4.161 Conflicts: drivers/net/phy/micrel.c drivers/usb/chipidea/core.c
2022-01-10Merge tag 'v5.4.160' into HEADDenys Drozdov
This is the 5.4.160 stable release
2022-01-10Merge tag 'v5.4.156' into HEADDenys Drozdov
This is the 5.4.156 stable release
2021-11-26ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detectHans de Goede
[ Upstream commit 92d3360108f1839ca40451bad20ff67dd24a1964 ] Add a quirk mechanism to allow specifying that active-high jack-detection should be used on platforms where this info is not available in devicetree. And add an entry for the Cyberbook T116 tablet to the DMI table, so that jack-detection will work properly on this tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211002211459.110124-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ASoC: cs42l42: Defer probe if request_threaded_irq() returns EPROBE_DEFERRichard Fitzgerald
[ Upstream commit 0306988789d9d91a18ff70bd2bf165d3ae0ef1dd ] The driver can run without an interrupt so if devm_request_threaded_irq() failed, the probe() just carried on. But if this was EPROBE_DEFER the driver would continue without an interrupt instead of deferring to wait for the interrupt to become available. Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211015133619.4698-6-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-17ASoC: cs42l42: Correct some register default valuesRichard Fitzgerald
[ Upstream commit d591d4b32aa9552af14a0c7c586a2d3fe9ecc6e0 ] Some registers had wrong default values in cs42l42_reg_defaults[]. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Link: https://lore.kernel.org/r/20211015133619.4698-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-11-08Merge remote-tracking branch 'fscl/5.4-2.3.x-imx' into toradex_5.4-2.3.x-imxDenys Drozdov
2021-10-27ASoC: wm8960: Fix clock configuration on slave modeShengjiu Wang
[ Upstream commit 6b9b546dc00797c74bef491668ce5431ff54e1e2 ] There is a noise issue for 8kHz sample rate on slave mode. Compared with master mode, the difference is the DACDIV setting, after correcting the DACDIV, the noise is gone. There is no noise issue for 48kHz sample rate, because the default value of DACDIV is correct for 48kHz. So wm8960_configure_clocking() should be functional for ADC and DAC function even if it is slave mode. In order to be compatible for old use case, just add condition for checking that sysclk is zero with slave mode. Fixes: 0e50b51aa22f ("ASoC: wm8960: Let wm8960 driver configure its bit clock and frame clock") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1634102224-3922-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-16Merge tag 'v5.4.147' into 5.4-2.3.x-imxAndrey Zhizhikin
This is the 5.4.147 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2021-09-15ASoC: wcd9335: Disable irq on slave ports in the remove functionChristophe JAILLET
[ Upstream commit d3efd26af2e044ff2b48d38bb871630282d77e60 ] The probe calls 'wcd9335_setup_irqs()' to enable interrupts on all slave ports. This must be undone in the remove function. Add a 'wcd9335_teardown_irqs()' function that undoes 'wcd9335_setup_irqs()' function, and call it from the remove function. Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Message-Id: <8f761244d79bd4c098af8a482be9121d3a486d1b.1629091028.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15ASoC: wcd9335: Fix a memory leak in the error handling path of the probe ↵Christophe JAILLET
function [ Upstream commit fc6fc81caa63900cef9ebb8b2e365c3ed5a9effb ] If 'wcd9335_setup_irqs()' fails, me must release the memory allocated in 'wcd_clsh_ctrl_alloc()', as already done in the remove function. Add an error handling path and the missing 'wcd_clsh_ctrl_free()' call. Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Message-Id: <6dc12372f09fabb70bf05941dbe6a1382dc93e43.1629091028.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-15ASoC: wcd9335: Fix a double irq free in the remove functionChristophe JAILLET
[ Upstream commit 7a6a723e98aa45f393e6add18f7309dfffa1b0e2 ] There is no point in calling 'free_irq()' explicitly for 'WCD9335_IRQ_SLIMBUS' in the remove function. The irqs are requested in 'wcd9335_setup_irqs()' using a resource managed function (i.e. 'devm_request_threaded_irq()'). 'wcd9335_setup_irqs()' requests all what is defined in the 'wcd9335_irqs' structure. This structure has only one entry for 'WCD9335_IRQ_SLIMBUS'. So 'devm_request...irq()' + explicit 'free_irq()' would lead to a double free. Remove the unneeded 'free_irq()' from the remove function. Fixes: 20aedafdf492 ("ASoC: wcd9335: add support to wcd9335 codec") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Message-Id: <0614d63bc00edd7e81dd367504128f3d84f72efa.1629091028.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18Merge tag 'v5.4.142' into 5.4-2.3.x-imxAndrey Zhizhikin
This is the 5.4.142 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2021-08-18ASoC: cs42l42: Fix LRCLK frame start edgeRichard Fitzgerald
[ Upstream commit 0c2f2ad4f16a58879463d0979a54293f8f296d6f ] An I2S frame starts on the falling edge of LRCLK so ASP_STP must be 0. At the same time, move other format settings in the same register from cs42l42_pll_config() to cs42l42_set_dai_fmt() where you'd expect to find them, and merge into a single write. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Link: https://lore.kernel.org/r/20210805161111.10410-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ASoC: cs42l42: Remove duplicate control for WNF filter frequencyRichard Fitzgerald
[ Upstream commit 8b353bbeae20e2214c9d9d88bcb2fda4ba145d83 ] The driver was defining two ALSA controls that both change the same register field for the wind noise filter corner frequency. The filter response has two corners, at different frequencies, and the duplicate controls most likely were an attempt to be able to set the value using either of the frequencies. However, having two controls changing the same field can be problematic and it is unnecessary. Both frequencies are related to each other so setting one implies exactly what the other would be. Removing a control affects user-side code, but there is currently no known use of the removed control so it would be best to remove it now before it becomes a problem. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Link: https://lore.kernel.org/r/20210803160834.9005-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ASoC: cs42l42: Fix inversion of ADC Notch Switch controlRichard Fitzgerald
[ Upstream commit 30615bd21b4cc3c3bb5ae8bd70e2a915cc5f75c7 ] The underlying register field has inverted sense (0 = enabled) so the control definition must be marked as inverted. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Link: https://lore.kernel.org/r/20210803160834.9005-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ASoC: cs42l42: Don't allow SND_SOC_DAIFMT_LEFT_JRichard Fitzgerald
[ Upstream commit 64324bac750b84ca54711fb7d332132fcdb87293 ] The driver has no support for left-justified protocol so it should not have been allowing this to be passed to cs42l42_set_dai_fmt(). Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Link: https://lore.kernel.org/r/20210729170929.6589-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18ASoC: cs42l42: Correct definition of ADC Volume controlRichard Fitzgerald
[ Upstream commit ee86f680ff4c9b406d49d4e22ddf10805b8a2137 ] The ADC volume is a signed 8-bit number with range -97 to +12, with -97 being mute. Use a SOC_SINGLE_S8_TLV() to define this and fix the DECLARE_TLV_DB_SCALE() to have the correct start and mute flag. Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210729170929.6589-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-16Merge tag 'v5.4.139' into 5.4-2.3.x-imxAndrey Zhizhikin
This is the 5.4.139 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2021-08-08ASoC: tlv320aic31xx: fix reversed bclk/wclk master bitsKyle Russell
[ Upstream commit 9cf76a72af6ab81030dea6481b1d7bdd814fbdaf ] These are backwards from Table 7-71 of the TLV320AIC3100 spec [1]. This was broken in 12eb4d66ba2e when BCLK_MASTER and WCLK_MASTER were converted from 0x08 and 0x04 to BIT(2) and BIT(3), respectively. -#define AIC31XX_BCLK_MASTER 0x08 -#define AIC31XX_WCLK_MASTER 0x04 +#define AIC31XX_BCLK_MASTER BIT(2) +#define AIC31XX_WCLK_MASTER BIT(3) Probably just a typo since the defines were not listed in bit order. [1] https://www.ti.com/lit/gpn/tlv320aic3100 Signed-off-by: Kyle Russell <bkylerussell@gmail.com> Link: https://lore.kernel.org/r/20210622010941.241386-1-bkylerussell@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-04Merge tag 'v5.4.136' into 5.4-2.3.x-imxAndrey Zhizhikin
This is the 5.4.136 stable release Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2021-07-28ASoC: rt5631: Fix regcache sync errors on resumeMaxim Schwalm
[ Upstream commit c71f78a662611fe2c67f3155da19b0eff0f29762 ] The ALC5631 does not like multi-write accesses, avoid them. This fixes: rt5631 4-001a: Unable to sync registers 0x3a-0x3c. -121 errors on resume from suspend (and all registers after the registers in the error not being synced). Inspired by commit 2d30e9494f1e ("ASoC: rt5651: Fix regcache sync errors on resume") from Hans de Geode, which fixed the same errors on ALC5651. Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com> Link: https://lore.kernel.org/r/20210712005011.28536-1-digetx@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20Merge tag 'v5.4.132' into 5.4-2.3.x-imxAndrey Zhizhikin
This is the 5.4.132 stable release Conflicts (manual resolve): - drivers/gpu/drm/rockchip/cdn-dp-core.c: Fix merge hiccup when integrating upstream commit 450c25b8a4c9c ("drm/rockchip: cdn-dp-core: add missing clk_disable_unprepare() on error in cdn_dp_grf_write()") - drivers/perf/fsl_imx8_ddr_perf.c: Port upstream commit 3fea9b708ae37 ("drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()") manually to NXP version. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
2021-07-15MLK-25103: ASoC: wm8524: avoid EPROBE_DEFER logViorel Suman
Sometimes the codec is probed before the GPIO controller is available. This leads to annoying EPROBE_DEFER related log, so fix this. Signed-off-by: Viorel Suman <viorel.suman@nxp.com> (cherry picked from commit 2a3ab6de8f1ae561996e7613d340c46749704151)
2021-07-15ASoC: rt5659: Fix the lost powers for the HDA headerJack Yu
[ Upstream commit 6308c44ed6eeadf65c0a7ba68d609773ed860fbb ] The power of "LDO2", "MICBIAS1" and "Mic Det Power" were powered off after the DAPM widgets were added, and these powers were set by the JD settings "RT5659_JD_HDA_HEADER" in the probe function. In the codec probe function, these powers were ignored to prevent them controlled by DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Jack Yu <jack.yu@realtek.com> Message-Id: <15fced51977b458798ca4eebf03dafb9@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-15ASoC: sti-sas: add missing MODULE_DEVICE_TABLEZou Wei
[ Upstream commit e072b2671606c77538d6a4dd5dda80b508cb4816 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-15ASoC: max98088: fix ni clock divider calculationMarco Felsch
[ Upstream commit 6c9762a78c325107dc37d20ee21002b841679209 ] The ni1/ni2 ratio formula [1] uses the pclk which is the prescaled mclk. The max98088 datasheet [2] has no such formula but table-12 equals so we can assume that it is the same for both devices. While on it make use of DIV_ROUND_CLOSEST_ULL(). [1] https://datasheets.maximintegrated.com/en/ds/MAX98089.pdf; page 86 [2] https://datasheets.maximintegrated.com/en/ds/MAX98088.pdf; page 82 Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210423135402.32105-1-m.felsch@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-15ASoC: cs35l33: fix an error code in probe()Dan Carpenter
[ Upstream commit 833bc4cf9754643acc69b3c6b65988ca78df4460 ] This error path returns zero (success) but it should return -EINVAL. Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-15ASoC: cs42l42: Regmap must use_single_read/writeRichard Fitzgerald
[ Upstream commit 0fad605fb0bdc00d8ad78696300ff2fbdee6e048 ] cs42l42 does not support standard burst transfers so the use_single_read and use_single_write flags must be set in the regmap config. Because of this bug, the patch: commit 0a0eb567e1d4 ("ASoC: cs42l42: Minor error paths fixups") broke cs42l42 probe() because without the use_single_* flags it causes regmap to issue a burst read. However, the missing use_single_* could cause problems anyway because the regmap cache can attempt burst transfers if these flags are not set. Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210511132855.27159-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-15ASoC: cs43130: handle errors in cs43130_probe() properlyGreg Kroah-Hartman
[ Upstream commit 2da441a6491d93eff8ffff523837fd621dc80389 ] cs43130_probe() does not do any valid error checking of things it initializes, OR what it does, it does not unwind properly if there are errors. Fix this up by moving the sysfs files to an attribute group so the driver core will correctly add/remove them all at once and handle errors with them, and correctly check for creating a new workqueue and unwinding if that fails. Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210503115736.2104747-58-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-05-21 01:19:34 +0000