summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2012-02-04ASoC: core: Add support for DAI and machine kcontrols.Liam Girdwood
Currently ASoC can only add kcontrols using codec and platform component device handles. It's also desirable to add kcontrols for DAIs (i.e. McBSP) and for SoC card machine drivers too. This allows the kcontrol to have a direct handle to the parent ASoC component DAI/SoC Card/Platform/Codec device and hence easily get it's private data. This change makes snd_soc_add_controls() static and wraps it in the folowing calls (card and dai are new) :- snd_soc_add_card_controls() snd_soc_add_codec_controls() snd_soc_add_dai_controls() snd_soc_add_platform_controls() This patch also does a lot of small mechanical changes in individual codec drivers to replace snd_soc_add_controls() with snd_soc_add_codec_controls(). It also updates the McBSP DAI driver to use snd_soc_add_dai_controls(). Finally, it updates the existing machine drivers that register controls to either :- 1) Use snd_soc_add_card_controls() where no direct codec control is required. 2) Use snd_soc_add_codec_controls() where there is direct codec control. In the case of 1) above we also update the machine drivers to get the correct component data pointers from the kcontrol (rather than getting the machine pointer via the codec pointer). Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-01ASoC: wm9712: Add TLV information for microphone inputMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-01ASoC: wm9712: Remove driver specific versionMark Brown
I don't think it's been updated since the driver was merged. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-01ASoC: wm5100: Handle failures to determine accessory polarityMark Brown
If we get an indeterminate impedance with both headset polarities then give up and report the accessory as a headphone rather than continually retrying. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-01ASoC: wm8996: Use devm_regulator_bulk_get()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-01ASoC: wm8996: Switch to using common code for managing CPVDD supplyMark Brown
Nice code saving. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-02-01Merge tag 'v3.3-rc2' into for-3.4Mark Brown
A reasonable amount of new development is causing fiddly merge conflicts between different resource management changes (mostly fixing bugs in resource management due to noticing things while doing enhancements in the same area). Linux 3.3-rc2 .. several days delayed. No reason, I just didn't think of it.
2012-01-31ASoC: wm_hubs: Push check for idle_bias_off out into driversMark Brown
For later wm_hubs devices we have much less need to keep the biases up even when using single ended line outputs so flag idle_bias_off for everything except the WM8993 and WM8994. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-31ASoC: wm8993: Convert to use a regmap patchMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-31ASoC: max9768: Fix up review comments in max9768 driverMark Brown
The Mute Switch should be called Playback Switch to match the volume and the regmap core has been updated so we don't need to mark all the registers as non-volatile. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2012-01-30ASoC: max9768: add driver for max9768 amplifierWolfram Sang
Add a driver supporting the volume control and the mute pin. Shdn pin and DAPM are not taken care of yet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-29ASoC: wm2200: Remove trailing whitespaceMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-27ASoC: wm8962: Enable idle_bias_offMark Brown
The WM8962 has ground referenced and class D outputs so can happily go down to BIAS_OFF without a large startup time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-27ASoC: Set idle_bias_off flag in snd_soc_codec_driverAxel Lin
Since commit 33c5f969 "ASoC: Allow idle_bias_off to be specified in CODEC drivers", now we can set idle_bias_off flag in struct snd_soc_codec_driver for devices can unconditionally support idle_bias_off. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-26ASoC: wm8994: Report any low impedance accessory as a headphoneMark Brown
Report any accessory with a low impedance as a headphone, previously anything other than a short or microphone would not be reported at all. The most likely reason is a microphone with incorrect polarity. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-26ASoC: wm8996: Handle failures to determine accessory polarityMark Brown
If we get an indeterminate impedance with both headset polarities then give up and report the accessory as a headphone rather than continually retrying. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-26ASoC: wm5100: Use pm_runtime for powerdown managmentMark Brown
Using pm_runtime to decide if the device should go into full power down has the dual advantage of allowing easier integration with non-DAPM reasons to power on the device (like the FLL) and allowing userspace to control the final power down which is useful for tuning retention of DSP firmware. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-26ASoC: wm5100: Convert to devm_regulator_bulk_get()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-26ASoC: wm2200: Add WM2200 CODEC driverMark Brown
The WM2200 is a low power mobile CODEC with enhanced Wolfson myZone Ambient Noise Cancellation (ANC) intended for mobile telephony applications. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-26ASoC: wm5100: Move regulator supplies over to DAPM infrastructureMark Brown
Saves a nice block of code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-24ASoC: wm8962: Optimise power consumption for IN4 DC measurement usageMark Brown
When the hardware is configured with one or both of the IN4 inputs used for DC measurement (with no DC blocking capacitor connected) then we can improve power consumption slightly in idle modes by applying a register write sequence. Provide platform data to enable this, implemented using a regmap patch. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-24ASoC: wm5100: Fix warnings from recent patchesMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-24ASoC: Convert the WM5100 revision A updates to a regmap patchMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-24ASoC: wm5100: Fix mismerge of IRQ freesMark Brown
We only want them at the device level, not at the CODEC level. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-24ASoC: Convert WM8731 to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-24ASoC: wm2000: Fix use-after-free - don't release_firmware() twice on errorJesper Juhl
In wm2000_i2c_probe(), if we take the true branch in " ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm2000, NULL, 0); if (ret != 0) goto err_fw; " then we'll release_firmware(fw) at the 'err_fw' label. But we've already done that just a few lines above. That's a use-after-free bug. This patch restructures the code so that we always call release_firmware(fw) before leaving the function, but only ever call it once. This means that we have to initialize 'fw' to NULL since some paths may now end up calling it without having called request_firmware(), but since request_firmware() deals gracefully with NULL pointers, we are fine if we just NULL initialize it. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-23ASoC: wm8958: Use correct format string in dev_err() callJesper Juhl
To print a value of type size_t one should use %zd, not %d. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-23ASoC: Add __devinit/__devexit annotations at necessary placesAxel Lin
Fix below build warning when CONFIG_HOTPLUG is not set. CC sound/soc/codecs/alc5623.o sound/soc/codecs/alc5623.c:1062: warning: ‘alc5623_i2c_remove’ defined but not used CC sound/soc/codecs/alc5632.o sound/soc/codecs/alc5632.c:1112: warning: ‘alc5632_i2c_remove’ defined but not used Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-23ASoC: sgtl5000: It's sgtl5000 not sgtl500Mark Brown
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-22ASoC: sgtl5000: Convert to table based DAPM and control initFabio Estevam
Convert to table based DAPM and control init. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-22ASoC: wm8996: Call _POST_PMU callback for CPVDDMark Brown
We should be allowing a 5ms delay after the charge pump is started in order to ensure it has finished ramping. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2012-01-21ASoC: wm8988: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: wm8988: Convert to table based DAPM and control initMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: wm8985: Convert to direct regmap API usageMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: wm8985 Don't directly reference the cache data structureMark Brown
In preparation for conversion to regmap. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: wm8985: Use standard cache sync implementationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: wm8985: Convert to table based DAPM and control initMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: wm8985: Convert to devm_kzalloc()Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-21ASoC: Fix build of tlv320dac33Mark Brown
The problem was introduced due to the obscure formatting some of the older drivers use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Push WM5100 interrupt request into I2C probeMark Brown
This is more what the device model wants us to do and will allow use by non-audio functions before the audio part of the device has come up. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Make WM5100 interrupt path use regmap directlyMark Brown
This will allow us to move the interrupt allocation out of the ASoC part of the driver and simplifies the locking by removing any reliance in the bulk of the interrupt path on the big CODEC lock. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Remove redundant set_bias_level() from WM5100 remove()Mark Brown
The framework should bring the device down before it calls the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: twl4030: Use core to set the msbits constraintPeter Ujfalusi
Core can set the msbits constraint in behalf of the dai. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: tlv320dac33: Use core to set the msbits constraintPeter Ujfalusi
Core can set the msbits constraint in behalf of the dai. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: sgtl5000: Print revision number in hexFabio Estevam
Throughout the sgtl5000 driver source code and also in the sgtl5000 datasheet the revision code is shown in hexadecimal. Print it hex format, for consistency. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Say we can't read WM5100 ID registerMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: When releasing WM5100 put /RESET into resetMark Brown
Reset is active low, make sure we leave it asserted when release the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: 24 bits are significant on wm_hubs DAIsMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Make WM8993 I2C usage unconditionalMark Brown
The WM8993 only supports I2C so don't ifdef the I2C support in the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-20ASoC: Implement basic WM8993 interrupt supportMark Brown
If an interrupt is supplied then use it for thermal warning and FLL lock notifications. When using the interrupt raise the timeout for the FLL lock substantially to reduce the chances of spurious warnings. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.0.4) at 2025-05-19 13:50:40 +0000