| Age | Commit message (Collapse) | Author |
|---|
|
Currently the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP are defined
in the SOF PCM core, which doesn't scale. To account for platform
variations, these flags need to be set in DSP ops.
This patch only moves the definitions and does not change any
functionality.
Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191024210318.30068-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge Linux stable release v5.4.24 into imx_5.4.y
* tag 'v5.4.24': (3306 commits)
Linux 5.4.24
blktrace: Protect q->blk_trace with RCU
kvm: nVMX: VMWRITE checks unsupported field before read-only field
...
Signed-off-by: Jason Liu <jason.hui.liu@nxp.com>
Conflicts:
arch/arm/boot/dts/imx6sll-evk.dts
arch/arm/boot/dts/imx7ulp.dtsi
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
drivers/clk/imx/clk-composite-8m.c
drivers/gpio/gpio-mxc.c
drivers/irqchip/Kconfig
drivers/mmc/host/sdhci-of-esdhc.c
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
drivers/net/can/flexcan.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/mscc/ocelot.c
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
drivers/net/phy/realtek.c
drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
drivers/perf/fsl_imx8_ddr_perf.c
drivers/tee/optee/shm_pool.c
drivers/usb/cdns3/gadget.c
kernel/sched/cpufreq.c
net/core/xdp.c
sound/soc/fsl/fsl_esai.c
sound/soc/fsl/fsl_sai.c
sound/soc/sof/core.c
sound/soc/sof/imx/Kconfig
sound/soc/sof/loader.c
|
|
[ Upstream commit 6ca5cecbd1c1758666ab79446f19e0e61ed11444 ]
Add a state machine for FW boot to track the
different stages of FW boot and replace the boot_complete
field with fw_state field in struct snd_sof_dev.
This will be used to determine the actions to be performed
during system suspend.
One of the main motivations for adding this change is the
fact that errors during the top-level SOF device probe cannot
be propagated and therefore suspending the SOF device normally
during system suspend could potentially run into errors.
For example, with the current flow, if the FW boot failed
for some reason and the system suspends, the SOF device
suspend could fail because the CTX_SAVE IPC would be attempted
even though the FW never really booted successfully causing it
to time out. Another scenario that the state machine fixes
is when the runtime suspend for the SOF device fails and
the DSP is powered down nevertheless, the CTX_SAVE IPC during
system suspend would timeout because the DSP is already
powered down.
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191218002616.7652-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Log information about used compilator and optimization level
in sof firmware to host system.
It will be helful to catch some compiler dependent bugs.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
|
|
Currently, SOF probes machine drivers by creating a platform device
and passing the machine description as private data.
This is driven by the ACPI restrictions. Ideally, ACPI tables
should contain the description for the machine driver. This is
not possible because ACPI tables are frozen and used on multiple
OS-es (e.g Windows).
In the case, of Device Tree we don't have this restrictions, so we
choose to probe the machine drivers by creating a DT node as is
the standard ALSA way.
This patch makes the probing of machine drivers from SOF core optional
allowing for arm platforms to decouple the SOF core from machine
driver probing.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
|
|
Modify the signature for snd_sof_create_page_table to
take struct device pointer as an argument instead of
struct snd_sof_dev as this will be used by both the SOF
core device and its clients. Also, move the definition
out of core.c to utils.c.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
|
|
Remove snd_sof_init_topology() as it is never used.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
|
|
There is a lot of duplicate code when processing IPC firmware ready
notification and creating memory windows.
First step in reducing the code duplication is to introduce generic
functions:
* sof_get_windows
* sof_fw_ready
that will replace, in the first step, the specific implementation related
to baytrail related platforms:
* byt_get_windows
* byt_fw_ready
So we are basically moving code from intel/byt.c to loader.c keeping
in mind that mbox_offset is a per platform constant so we need to
use newly introduced snd_sof_dsp_get_mailbox_offset /
snd_sof_dsp_get_window_offset in order to get the correct
mbox offset / window offset value.
Also, bar is a per platform constant so we use snd_sof_dsp_get_bar_index
instead of the hardcoded BYT_DSP_BAR.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190807150203.26359-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This will allow us to export the offset for a memory window.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190807150203.26359-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This will allow us to export mailbox offset in order to
read the fw_ready message from.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190807150203.26359-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Also, if a debugfs call fails, userspace is notified with an error in
the log, so no need to log the error again.
Because we no longer need to check the return value, there's no need to
save the dentry returned by debugfs. Just use the dentry in the file
pointer if we really need to figure out the "name" of the file being
opened.
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20190731131716.9764-3-gregkh@linuxfoundation.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Enabling MSI on HDA can fail, in which case the legacy PCI IRQ mode
will be used. To make testing this mode easier add an "enable_msi"
module parameter, which is only enabled if debugging is enabled too.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove unused and no plan to use variable from suspend function.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
FW encapsulates information about section types (e.g DRAM, IRAM)
inside module block header. This information can be used in order
to correctly load the section to the appropriate place in memory.
SOF Linux driver needs to know for each platform how to map the
section type with the corresponding memory BAR. So, this patch
introduces get_bar_index, a new operation inside snd_sof_dsp_ops.
Intel platforms, usually load all the section in a contiguous memory
area (usually denoted by sdev->mmio_bar) so things are relatively
simple there. Anyhow, on i.MX8 IRAM and DRAM for example are mapped
to distinct BARs.
By default, if no get_bar function is provided the core implementation
will always return sdev->mmio_bar so that there will be no need for
a change to existing Intel code.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When application goes through SUSPEND/STOP->PREPARE->START
cycle, we should always reprogram the SOF device to start
DMA from a known state so that hw_ptr/appl_ptrs remain valid.
This is expected by ALSA core as it resets the buffer
state as part of prepare (see snd_pcm_do_prepare()).
Fix the issue by forcing reconfiguration of the FW with
STREAM_PCM_PARAMS in prepare(). Use combined logic to handle
prepare and the existing flow to reprogram hw-params after
system suspend.
Without the fix, first call to pcm pointer() will return
an invalid hw_ptr and application may immediately observe XRUN
status, unless "start_threshold" SW parameter is set to maximum
value by the application.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190722141402.7194-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add ability to implement a SOF device level runtime idle callback.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20190702132428.13129-3-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Host and link DMA are decoupled during FE hw_params. So,
they must be coupled in hw_free if the link DMA channel
is idle.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Paused streams do not get suspended when the system enters S3.
So, clear and release link DMA channel for such streams in the
hda_dsp_set_hw_params_upon_resume() callback. Also, invalidate
the link DMA channel in the DAI config before restoring the
dai config upon resume. Also, modify the signature for the
set_hw_params_upon_resume() op to return an int.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The recommended HDA HW programming sequence for setting
the DMA format requires that the link DMA and host DMA
channels be coupled before setting the format. This
change means that host DMA or link DMA channels be
reserved even if only one is used.
Statically assigned link DMA channels would mean that
all the corresponding host DMA channels will need to be
reserved, leaving only a few channels available at run-time.
So, the suggestion here is to switch to dynamically assigning
both host DMA channels and link DMA channels are run-time.
The host DMA channel is assigned when the pcm
is opened as before. While choosing the link DMA channel,
if the host DMA channel corresponding to the link DMA channel
is already taken, the proposed method checks to make
sure that the BE is connected to the FE that has been assigned
this host DMA channel. Once the link DMA channel is assigned,
an IPC is sent to the DSP to set the link DMA channel.
The link DMA channel is freed during hw_free() and also in the
SUSPEND trigger callback. It will be re-assigned when hw_params
are set upon resume.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the cpu_dai_name member to snd_sof_dai and save the
cpu_dai_name while setting the DAI config.
The internal SOF representation will have to change at a later point
as well when we have multiple CPU dais.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
add two units min_volume_step and max_volume_step to the snd_sof_control
struct, for the min and max step of the volume_table.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a couple of new debugfs entries "ipc_flood_count"
and "ipc_flood_duration_ms" that can be used to
execute the IPC flood test. "ipc_flood_count" floods the DSP
with the number of test IPCs specified and ipc_flood_duration_ms
floods the DSP with test IPC's for the duration(in ms) specified.
The test stats such as average, min and max IPC response times
are logged in the dmesg and saved in the debugfs entry cache buffer.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add mode parameter for snd_sof_debugfs_buf_item() to specify
the mode while creating debugfs entries.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Current trace implementation gets out of sync when sof device
is put to suspend. The debugfs file handle is kept open, but
firmware will reset its state. After resume, debugfs client's
read offset will not be synchronized to firmware and this may
result in traces read in incorrect order and/or stale data being
read after resume.
Add logic to signal end-of-file to read() when firmware tracing
has ended, and all trace data has been read. This allows debugfs
client to capture all trace data, and reopen the trace file to
ensure proper synchronization with firmware after reopening
the node.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Dump IPC status when IPC timed out. IPC status is platform specific and
need bind to plaform.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The prepare() ioctl for BE dai link gets called both
when the stream is started and when it is resumed from
suspend. SOF uses this ioctl to set the hw params
again only if the stream has been suspended.
When the stream is started, the hw_params ioctl gets called
before prepare() and hw_params is set for the BE dai link.
So the prepare call does not need to do anything further.
When the stream resumes after system suspend, SOF requires
that the hw_params be set again for the BE dai. In order
to determine which streams should set the hw params
during prepare(), an internal flag called "hw_params_upon_resume"
is introduced in struct sof_intel_hda_stream. The flag is set
for hda streams when the sof device suspends and is
cleared after hw_params is set.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When using a shared IRQ between IPC interrupt and stream IOC interrupt,
the interrupt handlers need to check the interrupt source before
scheduling their respective IRQ threads. In the case of IPC handler, it
should check if it is an IPC interrupt before waking up the IPC IRQ
thread.
The IPC IRQ thread, once scheduled, does not need to check the IRQ
source again. So, remove the superfluous check in the thread. Remove the
irq_status field from snd_sof_dev struct also as it is no longer needed.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
context
The IPC implementation in SOF requires sending IPCs serially: we should
not send a new IPC command to the firmware before we get an ACK (or time
out) from firmware, and the IRQ processing is complete.
snd_pcm_period_elapsed() can be called in interrupt context before
IRQ_HANDLED is returned. When the PCM is done draining, a STOP
IPC will then be sent, which breaks the expectation that IPCs are
handled serially and leads to IPC timeouts.
This patch adds a workqueue to defer the call to snd_pcm_elapsed() after
the IRQ is handled.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The Sound Open Firmware driver core is a generic architecture
independent layer that allows SOF to be used on many different
architectures and platforms. It abstracts DSP operations and IO
methods so that the target DSP can be an internal memory mapped or
external SPI or I2C based device. This abstraction also allows SOF to
be run on many different VMs on the same physical HW.
SOF also requires some data in ASoC PCM runtime data for looking up
SOF data during ASoC PCM operations.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
