summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2011-03-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: HDA: Realtek: Avoid unnecessary volume control index on Surround/Side ASoC: Support !REGULATOR build for sgtl5000 ALSA: hda - VIA: Fix VT1708 can't build up Headphone control issue ALSA: hda - VIA: Correct stream names for VT1818S ALSA: hda - VIA: Fix codec type for VT1708BCE at the right timing ALSA: hda - VIA: Fix invalid A-A path volume adjust issue ALSA: hda - VIA: Add missing support for VT1718S in A-A path ALSA: hda - VIA: Fix independent headphone no sound issue ALSA: hda - VIA: Fix stereo mixer recording no sound issue ALSA: hda - Set EAPD for Realtek ALC665 ALSA: usb - Remove trailing spaces from USB card name strings sound: read i_size with i_size_read() ASoC: Remove bogus check for register validity in debugfs write ASoC: mini2440: Fix uda134x codec problem.
2011-03-22ASoC: Support !REGULATOR build for sgtl5000Mark Brown
The regulator is optional depending on board design. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (308 commits) ALSA: sound/pci/asihpi: check adapter index in hpi_ioctl ALSA: aloop - Fix possible IRQ lock inversion ALSA: sound/core: merge list_del()/list_add_tail() to list_move_tail() ALSA: ctxfi - use list_move() instead of list_del()/list_add() combination ALSA: firewire - msleep needs delay.h ALSA: firewire-lib, firewire-speakers: handle packet queueing errors ALSA: firewire-lib: allocate DMA buffer separately ALSA: firewire-lib: use no-info SYT for packets without SYT sample ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver ALSA: hda - Remove an unused variable in patch_realtek.c ALSA: hda - pin-adc-mux-dmic auto-configuration of 92HD8X codecs ALSA: hda - fix digital mic selection in mixer on 92HD8X codecs ALSA: hda - Move default input-src selection to init part ALSA: hda - Initialize special cases for input src in init phase ALSA: ctxfi - Clear input settings before initialization ALSA: ctxfi - Fix SPDIF status retrieval ALSA: ctxfi - Fix incorrect SPDIF status bit mask ALSA: ctxfi - Fix microphone boost codes/comments ALSA: atiixp - Fix wrong time-out checks during ac-link reset ALSA: intel8x0m: append 'm' to "r_intel8x0" ...
2011-03-18ASoC: Remove bogus check for register validity in debugfs writeMark Brown
Since not all registers need to be cached and the cache is entirely optional anyway we shouldn't be checking that a register is in the cached range. If the register is invalid then the actual I/O code can determine that and report an error. Similarly, the step size can and should be enforced by the lower level code if it's important. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-18Merge branch 'topic/asoc' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 into for-2.6.39
2011-03-17Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
2011-03-17Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-16Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
2011-03-16Merge branch 'for-2.6.39' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
2011-03-15Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable Conflicts: arch/arm/mm/Kconfig
2011-03-12Merge branch 'master' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-tcc into devel-stable
2011-03-11ASoC: mini2440: Fix uda134x codec problem.Marek Belisko
ASoC audio for mini2440 platform in current kenrel doesn't work. First problem is samsung_asoc_dma device is missing in initialization. Next problem is with codec. Codec is initialized but never probed because no platform_device exist for codec driver. It leads to errors during codec binding to asoc dai. Next problem was platform data which was passed from board to asoc main driver but not passed to codec when called codec_soc_probe(). Following patch should fix issues. But not sure if in correct way. Please review. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-11ASoC: Fix spacing in MAX8950Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-11ASoC: PXA: Z2: Fix codec pin nameVasily Khoruzhick
MONO was renamed to MONO1. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-03-11ASoC: PXA: z2: Mute internal speaker when headphones are connectedVasily Khoruzhick
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-11ASoC: Add MAX9850 codec driverChristian Glindkamp
This patch adds ASoC support for the MAX9850 codec with headphone amplifier. Supported features: - Playback - 16, 20 and 24 bit audio - 8k - 48k sample rates - DAPM Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-10Merge branch 'for_2.6.39/pm-misc' of ↵Tony Lindgren
ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus
2011-03-11Merge branch 'next-exynos4' into for-nextKukjin Kim
2011-03-10Merge branch 'for-2.6.38' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into fix/asoc
2011-03-10Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
2011-03-10Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Russell King
devel-stable
2011-03-09ASoC: Ensure WM8958 gets all WM8994 late revision widgetsMark Brown
Without this fix the driver won't instantiate properly on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-09ASoC: Fix typo in late revision WM8994 DAC2R nameMark Brown
Without this fix the driver won't instantiate properly on relevant devices. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com> Cc: stable@kernel.org
2011-03-09ASoC: Enable 192kHz sample rate for EP93xx.Alexander Sverdlin
Enable 192kHz sample rate for EP93xx. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-09ASoC: Improve EP93xx I2S clocks management.Alexander Sverdlin
Improve EP93xx I2S clocks management. Some freqs values are set not exact as they requested for MCLK and original code was not able to find divisors for SCLK and LRCLK. This code just picks up nearest value from 3 possible variants. This patch makes 44100 and 192000 rates working and fixes capture function (by selecting SCLK/LRCLK=64 where possible). All other rates should work as before. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-09ASoC: EDB93xx: Manage I2S rates according to datasheet for CS4271 CODEC.Alexander Sverdlin
Manage I2S rates according to datasheet for CS4271 CODEC in EDB93xx machine driver. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-09ASoC: Manage mode and rate bits correctly for CS4271 CODEC.Alexander Sverdlin
Manage mode and rate bits correctly, according to datasheet in CS4271 CODEC. This is done to make capture work properly. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-09Merge branch 'for-2.6.38' into for-2.6.39Mark Brown
Conflicts: sound/soc/codecs/wm8978.c sound/soc/soc-dapm.c
2011-03-09ASoC: Fix double addition of prefixes due to widget prefixingMark Brown
We're not only prefixing all controls, we're also prefixing the widget names in the runtime data. This causes us to add the prefix twice - once when using the widget name to generate the control name and once when adding the control. Really we shouldn't be prefixing the widget names at all, the matching code should be handing this as we always know which DAPM context a widget came from and always display the widget name in terms of a DAPM context. However, we're quite close to the merge window and that's relatively invasive. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reported-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-09ASoC: Use the correct DAPM context when cleaning up final widget setMark Brown
Now we've got multi-component we need to make sure that the DAPM context (and hence register I/O context) we use to apply the pending updates at the end of a DAPM sequence is the one we were processing rather than the one that was used to initate the state change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-09ASoC: Fix broken bitfield definitions in WM8978Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Cc: stable@kernel.org
2011-03-09ASoC: Simplify WM9081 speaker startup by using widgets for spaker outputMark Brown
Now we have a register write minimisation code in DAPM we don't need to worry about the ordering of the enable and disable of the PGA and the output stage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-09ASoC: AM3517: Update codec name after multi-component updateAbhilash K V
The i2c client device name (".2-001a" in this case, including the separator period) for the AIC23 codec on the TI AM3517-EVM was appended to the codec_name member of am3517evm_dai to resolve the names mismatch happening in soc_bind_dai_link(), due to which the card was not getting registered. Signed-off-by: Abhilash K V <abhilash.kv@ti.com> Acked-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-09ASoC: omap: rx51: Enable McBSP2 sidetoneJarkko Nikula
McBSP sidetone is needed in telephony applications. McBSP sidetone is a configurable FIR filter that forms a loopback from McBSP input to output. This patch enables the McBSP2 sidetone ALSA controls so that it can be used on Nokia RX-51/N900. Sidetone feature can be tested with following commands: (set up codec input and output paths) # Enable and configure sidetone amixer -D hw:0 set 'McBSP2 Sidetone' on amixer set -D hw:0 'McBSP2 Sidetone Channel 0' 32767 echo 32767 >/sys/devices/platform/omap-mcbsp.2/st_taps # Do not loop audio via CPU arecord -f dat >/dev/null |aplay /dev/zero Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-03-08ASoC: sgtl5000: use after free in ldo_regulator_register()Dan Carpenter
The "ldo" variable was dereferenced after free on the error path. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-08ASoC: Fix prefixing of DAPM controls by factoring prefix into snd_soc_cnew()Mark Brown
Currently will ignore prefixes when creating DAPM controls. Since currently all control creation goes through snd_soc_cnew() we can fix this by factoring the prefixing into that function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-08ASoC: Warn rather than set a silly constraint when we can't do symmetryMark Brown
Symmetric rate configuration can fail if the second stream starting tries to apply the symmetric constraint before the first stream has got far enough to pick a rate. Rather than try to enforce a nonsensical rate of 0Hz log a warning and allow the application to carry on. Things might go wrong later on but the user will know about it and there's unlikely to be lasting damage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-08ASoC: Refactor symmetric_rates check to reduce indentationMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-08ASoC: Convert WM9081 SYSCLK configuration to be device wideMark Brown
Also respace the CODEC ops a bit for legibility. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-08ASoC: Provide CODEC clocking operations and API callsMark Brown
When multi component systems use DAIless amplifiers which require clocking configuration it is at best hard to use the current clocking API as this requires a DAI even though the device may not even have one. Address this by adding set_sysclk() and set_pll() operations and APIs for CODECs. In order to avoid issues with devices which could be used either with or without DAIs make the DAI variants call through to their CODEC counterparts if there is no DAI specific operation. Converting over entirely would create problems for multi-DAI devices which offer per-DAI clocking setup. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-08ASoC: Fix section mismatch warnings in WM8994Mark Brown
Annoying as the __devinitdata is actually correct. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-08ASoC: Use data based init for WM9081 DAPMMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-08ASoC: Add DAPM widget and path data to CODEC driver structureMark Brown
Allow a slight simplification of CODEC drivers by allowing DAPM routes and widgets to be provided in a table. They will be instantiated at the end of CODEC probe. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-07ASoC: Remove warnings in ep93xx-i2s.cAlexander Sverdlin
Remove warnings in ep93xx-i2s.c Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Extend range of supported sample rates for CS4271 CODEC.Alexander Sverdlin
Extend range of supported sample rates for CS4271 CODEC. Signed-off-by: Alexander Sverdlin <subaparts@yandex.ru> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Add LM4857 to SND_SOC_ALL_CODECSMark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2011-03-07ASoC: Add driver for the dfbmcs320 bluetooth moduleLars-Peter Clausen
This patch adds a codec driver for the dfbmcs320 bluetooth module, which is used on the neo1973 boards. The patch also modifies the neo1937_wm8753 sound board driver to use the new driver instead of registering the bluetooth DAI manually. Previously there was a name mismatch between the bluetooth DAI and the bluetooth DAI link and the sound card was not instantiated, with this patch the issue is no longer present and sound support works again. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: Samsung: Merge neo1937_wm8753 and neo1973_gta02_wm8753 sound board driverLars-Peter Clausen
The neo1973(GTA01) and neo1973_gta02(GTA02) have a very similar audio hardware setup. They both use the same codec with the same routing to the gsm modem and bluetooth chip. But they do use different AMPs though and there are some minor differences in the speaker setup. As a result most of the code of those two drivers is identical. So from a maintenance point of view it makes sense to merge them into a single driver. It also reduces the size of kernel images supporting both the GTA01 and GTA02. As a side-effect of this merge the GTA01 for example gains support for routing audio to and from the bluetooth DAI. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_gta02_wm8753: Use gpio_request_array to request gpiosLars-Peter Clausen
Using gpio_request_array instead of requesting and setting up each gpio by hand makes the code more readable and more compact. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-03-07ASoC: neo1973_gta02_wm8753: Remove lm4853_{set,get}_stateLars-Peter Clausen
This patch drops the lm4853_{set,get}_state functions and the "Amp State Switch" control. Those were noops which existed to maintain alsa state file compatibility. Since the control names have changed due to internal changes in the ASoC core and state file compatibility was broken anyway it makes sense to drop them. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-07 18:44:02 +0000