Age | Commit message (Collapse) | Author |
|
commit 85915b63ad8b796848f431b66c9ba5e356e722e5 upstream.
When sun4i_codec_create_card fails, we do not assign a proper error
code to the return value. The return value would be 0 from the previous
function call, or we would have bailed out sooner. This would confuse
the driver core into thinking the device probe succeeded, when in fact
it didn't, leaving various devres based resources lingering.
Make the create_card function pass back a meaningful error code, and
assign it to the return value.
Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on
early Allwinner SoCs")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa5f920993bda2095952177eea79bc8e58ae6065 upstream.
Mismatching stream names in DAPM route and widget definitions are
causing compilation errors. Fixing these names allows the cs4270
driver to compile and function.
[Errors must be at probe time not compile time -- broonie]
Signed-off-by: Murray Foster <mrafoster@gmail.com>
Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a3930ed060df4ccf2a06cf0b68738dec3e6ff89a upstream.
Commit d88429a695a4 ("ASoC: dapm: Add output driver widget") added
the snd_soc_dapm_out_drv ID for the output driver widget, which is
the same as the PGA widget, with a later power sequence number.
Commit 19a2557b76d6 ("ASoC: dapm: Add kcontrol support for PGAs")
then added kcontrol support for PGA widgets, but failed to account
for output driver widgets. Attempts to use kcontrols with output
driver widgets result in silent failures, with the developer having
little idea about what went on.
Add snd_soc_dapm_out_drv to the switch/case block under snd_soc_dapm_pga
in dapm_create_or_share_kcontrol, since they are essentially the same.
Fixes: 19a2557b76d6 (ASoC: dapm: Add kcontrol support for PGAs)
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 071133a209354f39d4e5785d5a6a390e03241841 upstream.
The value for the second channel in _ENUM_DOUBLE (double channel) MUXs
is not correctly updated, due to using the wrong bit shift.
Use the correct bit shift, so both channels toggle together.
Fixes: 3727b4968453 (ASoC: dapm: Consolidate MUXs and value MUXs)
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 01ad5e7de67b408d9b48b437b06a9938ddf460b5 upstream.
If soc_dapm_read() fails, val will be uninitialized, and bogus values
will be written later:
ret = soc_dapm_read(dapm, reg, &val);
val = (val >> shift) & mask;
However, the compiler does not give a warning. Return on error before
val is really used to avoid this.
This is similar to the commit 6912831623c5 ("ASoC: dapm: Fix
uninitialized variable in snd_soc_dapm_get_enum_double()")
Fixes: ce0fc93ae56e (ASoC: Add DAPM support at the component level)
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ae3ea48df0d746b663057cf0b972a18d0777b7b upstream.
Fix to return error code -ENOMEM instead of 0 when failed to create
widget, as done elsewhere in this function.
Fixes: 8a9782346dcc ("ASoC: topology: Add topology core")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 61ab0d403bbd9d5f6e000e3b5734049141b91f6f upstream.
In sst_prepare_and_post_msg(), when a response is received in "block",
the following code gets executed:
*data = kzalloc(block->size, GFP_KERNEL);
memcpy(data, (void *) block->data, block->size);
The memcpy() call overwrites the content of the *data pointer instead of
filling the newly-allocated memory (which pointer is hold by *data).
Fix this by merging kzalloc+memcpy into a single kmemdup() call.
Thanks Joe Perches for suggesting using kmemdup()
Fixes: 60dc8dbacb00 ("ASoC: Intel: sst: Add some helper functions")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a8719670687c46ed2e904c0d05fa4cd7e4950cd1 upstream.
Fixes: ddd17531ad908 ("ASoC: omap-mcpdm: Clean up with devm_* function")
Managed irq request will not doing any good in ASoC probe level as it is
not going to free up the irq when the driver is unbound from the sound
card.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 979cf59acc9d634cc140aadd0d2915947ab303cc upstream.
Fix to return error code -ENODEV from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 87b2bdf02278 ("ASoC: Intel: Skylake: Initialize NHLT table")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-By: Vinod Koul <vinod.kou@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e103a65514c2947e53f3171b21255fbde8b60c6 upstream.
commit cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and
shutdown") refactored code such that the SSC is reset on every
startup; this breaks duplex audio (e.g. first start audio playback,
then start record, causing the playback to stop/hang)
Fixes: cbaadf0f90d6 (ASoC: atmel_ssc_dai: refactor the startup and shutdown)
Signed-off-by: Christoph Huber <c.huber@bct-electronic.com>
Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3030d11961a8c103cf07aed59905276ddfc06c2 upstream.
The ak4642 driver is using a regmap cache sync to restore the
configuration of the chip on resume but (as Peter observed) does not
actually define a register cache which means that the resume is never
going to work and we trigger asserts in regmap. Fix this by enabling
caching.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 653aa4645244042826f105aab1be3d01b3d493ca upstream.
this patch corrects the interface adc/dac control register definition
according to datasheet.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47325078f2a3e543150e7df967e45756b2fff7ec upstream.
The dummy component is reused for all cards so we special case and don't
bind it to any of them. This means that code like that displaying the
component widgets that tries to look at the card will crash. In the
future we will fix this by ensuring that the dummy component looks like
other components but that is invasive and so not suitable for a fix.
Instead add a special case check here.
Reported-by: Harry Pan <harry.pan@intel.com>
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 712a8038cc24dba668afe82f0413714ca87184e0 upstream.
When the ssm4567 is powered up the driver calles regcache_sync() to restore
the register map content. regcache_sync() assumes that the device is in its
power-on reset state. Make sure that this is the case by explicitly
resetting the ssm4567 register map before calling regcache_sync() otherwise
we might end up with a incorrect register map which leads to undefined
behaviour.
One such undefined behaviour was observed when returning from system
suspend while a playback stream is active, in that case the ssm4567 was
kept muted after resume.
Fixes: 1ee44ce03011 ("ASoC: ssm4567: Add driver for Analog Devices SSM4567 amplifier")
Reported-by: Harsha Priya <harshapriya.n@intel.com>
Tested-by: Fang, Yang A <yang.a.fang@intel.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ba4bc32eaa39ba7687f0958ae90eec94da613b46 upstream.
An older patch to convert the API in the s3c i2s driver
ended up passing a const pointer into a function that takes
a non-const pointer, so we now get a warning:
sound/soc/samsung/s3c2412-i2s.c: In function 's3c2412_iis_dev_probe':
sound/soc/samsung/s3c2412-i2s.c:172:9: error: passing argument 3 of 's3c_i2sv2_register_component' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
However, the s3c_i2sv2_register_component() function again
passes the pointer into another function taking a const, so
we just need to change its prototype.
Fixes: eca3b01d0885 ("ASoC: switch over to use snd_soc_register_component() on s3c i2s")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9a1a743818ea3265abf98f9431623afa8c50c86 upstream.
ARM64 allmodconfig produces a bunch of warnings when building the
samsung ASoC code:
sound/soc/samsung/dmaengine.c: In function 'samsung_asoc_init_dma_data':
sound/soc/samsung/dmaengine.c:53:32: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
playback_data->filter_data = (void *)playback->channel;
sound/soc/samsung/dmaengine.c:60:31: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
capture_data->filter_data = (void *)capture->channel;
We could easily shut up the warning by adding an intermediate cast,
but there is a bigger underlying problem: The use of IORESOURCE_DMA
to pass data from platform code to device drivers is dubious to start
with, as what we really want is a pointer that can be passed into
a filter function.
Note that on s3c64xx, the pl08x DMA data is already a pointer, but
gets cast to resource_size_t so we can pass it as a resource, and it
then gets converted back to a pointer. In contrast, the data we pass
for s3c24xx is an index into a device specific table, and we artificially
convert that into a pointer for the filter function.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d0784829ae3b0beeb69b476f017d5c8a2eb95198 upstream.
"MBC Mode", "VSS Mode", "VSS HPF Mode" and "Enhanced EQ Mode" ctls in
wm8958 codec driver are enum, while the current driver accesses
wrongly via value.integer.value[]. They have to be via
value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8019c0b37cd5a87107808300a496388b777225bf upstream.
The DRC Mode like "AIF1DRC1 Mode" and EQ Mode like "AIF1.1 EQ Mode" in
wm8994 codec driver are enum ctls, while the current driver accesses
wrongly via value.integer.value[]. They have to be via
value.enumerated.item[] instead.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 316fa9e09ad76e095b9d7e9350c628b918370a22 upstream.
Lockdep warns of a potential lock inversion, i2s->lock is held numerous
times whilst we are under the substream lock (snd_pcm_stream_lock). If
we use the IRQ unsafe spin lock calls, you can also end up locking
snd_pcm_stream_lock whilst under i2s->lock (if an IRQ happens whilst we
are holding i2s->lock). This could result in deadlock.
[ 18.147001] CPU0 CPU1
[ 18.151509] ---- ----
[ 18.156022] lock(&(&pri_dai->spinlock)->rlock);
[ 18.160701] local_irq_disable();
[ 18.166622] lock(&(&substream->self_group.lock)->rlock);
[ 18.174595] lock(&(&pri_dai->spinlock)->rlock);
[ 18.181806] <Interrupt>
[ 18.184408] lock(&(&substream->self_group.lock)->rlock);
[ 18.190045]
[ 18.190045] *** DEADLOCK ***
This patch changes to using the irq safe spinlock calls, to avoid this
issue.
Fixes: ce8bcdbb61d9 ("ASoC: samsung: i2s: Protect more registers with a spinlock")
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 741338f99f16dc24d2d01ac777b0798ae9d10a90 upstream.
snd_soc_dapm_dai_link_get() and _put() access the associated ctl
values as value.integer.value[]. However, this is an enum ctl, and it
has to be accessed via value.enumerated.item[]. The former is long
while the latter is unsigned int, so they don't align.
Fixes: c66150824b8a ('ASoC: dapm: add code to configure dai link parameters')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b28785fa9cede0d4f47310ca0dd2a4e1d50478b5 upstream.
The shift bit of IN1 boost gain control is 12.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5e82d2be6ee53275c72e964507518d7964c82753 upstream.
While performing hw_free, DPCM checks the BE state but leaves out
the suspend state. The suspend state needs to be checked as well,
as we might be suspended and then usermode closes rather than
resuming the audio stream.
This was found by a stress testing of system with playback in
loop and killed after few seconds running in background and second
script running suspend-resume test in loop
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a1068045883ed4a18363a4ebad0c3d55e473b716 upstream.
The detection of direction for compress was only taking into account codec
capabilities and not CPU ones. Fix this by checking the CPU side capabilities
as well
Tested-by: Ashish Panwar <ashish.panwar@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 24338722cfa23fdf4e08c6189a11f7e3a902d86a upstream.
We don't want to use a bypassed write in wm5110_clear_pga_volume,
we might disable the DRE whilst the CODEC is powered down. A
normal regmap_write will always go to the hardware (when not on
cache_only) even if the written value matches the cache. As using
a normal write will still achieve the desired behaviour of bring
the cache and hardware in sync, this patch updates the function
to use a normal write, which avoids issues when the CODEC is
powered down.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
|
|
|
|
This provide the fix for firmware memory by freeing the pointer in driver
remove where it is safe to do so
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit 87b5ed8ecb9fe05a696e1c0b53c7a49ea66432c1 ("ASoC: Intel:
Skylake: fix memory leak") as it causes regression on Skylake devices
The SKL drivers can be deferred probe. The topology file based widgets can
have references to topology file so this can't be freed until card is fully
created, so revert this patch for now
[ 66.682767] BUG: unable to handle kernel paging request at ffffc900001363fc
[ 66.690735] IP: [<ffffffff806c94dd>] strnlen+0xd/0x40
[ 66.696509] PGD 16e035067 PUD 16e036067 PMD 16e038067 PTE 0
[ 66.702925] Oops: 0000 [#1] PREEMPT SMP
[ 66.768390] CPU: 3 PID: 57 Comm: kworker/u16:3 Tainted: G O 4.4.0-rc7-skl #62
[ 66.778869] Hardware name: Intel Corporation Skylake Client platform
[ 66.793201] Workqueue: deferwq deferred_probe_work_func
[ 66.799173] task: ffff88008b700f40 ti: ffff88008b704000 task.ti: ffff88008b704000
[ 66.807692] RIP: 0010:[<ffffffff806c94dd>] [<ffffffff806c94dd>] strnlen+0xd/0x40
[ 66.816243] RSP: 0018:ffff88008b707878 EFLAGS: 00010286
[ 66.822293] RAX: ffffffff80e60a82 RBX: 000000000000000e RCX: fffffffffffffffe
[ 66.830406] RDX: ffffc900001363fc RSI: ffffffffffffffff RDI: ffffc900001363fc
[ 66.838520] RBP: ffff88008b707878 R08: 000000000000ffff R09: 000000000000ffff
[ 66.846649] R10: 0000000000000001 R11: ffffffffa01c6368 R12: ffffc900001363fc
[ 66.854765] R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000000
[ 66.862910] FS: 0000000000000000(0000) GS:ffff88016ecc0000(0000) knlGS:0000000000000000
[ 66.872150] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 66.878696] CR2: ffffc900001363fc CR3: 0000000002c09000 CR4: 00000000003406e0
[ 66.886820] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 66.894938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 66.903052] Stack:
[ 66.905346] ffff88008b7078b0 ffffffff806cb1db 000000000000000e 0000000000000000
[ 66.913854] ffff88008b707928 ffffffffa00d1050 ffffffffa00d104e ffff88008b707918
[ 66.922353] ffffffff806ccbd6 ffff88008b707948 0000000000000046 ffff88008b707940
[ 66.930855] Call Trace:
[ 66.933646] [<ffffffff806cb1db>] string.isra.4+0x3b/0xd0
[ 66.939793] [<ffffffff806ccbd6>] vsnprintf+0x116/0x540
[ 66.945742] [<ffffffff806d02f0>] kvasprintf+0x40/0x80
[ 66.951591] [<ffffffff806d0370>] kasprintf+0x40/0x50
[ 66.957359] [<ffffffffa00c085f>] dapm_create_or_share_kcontrol+0x1cf/0x300 [snd_soc_core]
[ 66.966771] [<ffffffff8057dd1e>] ? __kmalloc+0x16e/0x2a0
[ 66.972931] [<ffffffffa00c0dab>] snd_soc_dapm_new_widgets+0x41b/0x4b0 [snd_soc_core]
[ 66.981857] [<ffffffffa00be8c0>] ? snd_soc_dapm_add_routes+0xb0/0xd0 [snd_soc_core]
[ 67.007828] [<ffffffffa00b92ed>] soc_probe_component+0x23d/0x360 [snd_soc_core]
[ 67.016244] [<ffffffff80b14e69>] ? mutex_unlock+0x9/0x10
[ 67.022405] [<ffffffffa00ba02f>] snd_soc_instantiate_card+0x47f/0xd10 [snd_soc_core]
[ 67.031329] [<ffffffff8049eeb2>] ? debug_mutex_init+0x32/0x40
[ 67.037973] [<ffffffffa00baa92>] snd_soc_register_card+0x1d2/0x2b0 [snd_soc_core]
[ 67.046619] [<ffffffffa00c8b54>] devm_snd_soc_register_card+0x44/0x80 [snd_soc_core]
[ 67.055539] [<ffffffffa01c303b>] skylake_audio_probe+0x1b/0x20 [snd_soc_skl_rt286]
[ 67.064292] [<ffffffff808aa887>] platform_drv_probe+0x37/0x90
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add system clock detection to prevent output DC from SPO.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For a sample rate of 12kHz the bclk was taken from the 44.1kHz table as
we test for a multiple of 8kHz. This patch fixes this issue by testing
for multiples of 4kHz instead.
Signed-off-by: Nikesh Oswal <Nikesh.Oswal@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
'asoc/fix/fsl-sai', 'asoc/fix/rockchip', 'asoc/fix/sgtl5000' and 'asoc/fix/wm8974' into asoc-linus
|
|
After several open/close sai test with ctrl+c, there will be
I/O error. The SAI can't work anymore, can't recover. There
will be no frame clock. With adding the software reset in
trigger stop, the issue can be fixed.
This is a hardware bug/errata and reset is the only option.
According to the reference manual, the software reset doesn't
reset any control register but only internal hardware logics
such as bit clock generator, status flags, and FIFO pointers.
(Our purpose is just to reset the clock generator while the
software reset is the only way to do that.)
Since slave mode doesn't use the clock generator, only apply
the reset procedure to the master mode.
For asynchronous mode, TX will not be reset when RX is still
running. In this case, i can't reproduce this issue.
Signed-off-by: Zidan Wang <zidan.wang@freescale.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When power up, a "pop" is heard on line-in and mic-in.
An analysis of the PCM shows it lasts ~400ms
and looks like a filter response.
VAG power up should be delayed by 400ms as VAG power down is.
Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Explicitly set the transmit data level on the transceiver to 16 samples
rather then the default 0. This matches both the level set in the vendor
kernel and the (seemingly very similar) i2s engine. This fixes audio
glitches when playing back at 192k rate.
At the same time, fix a trivial typo in the TDL mask definition
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Attempting to use this codec driver triggers a BUG() in regcache_sync()
since no cache type is set. The register map of this device is fairly
small and has few holes so a flat cache is suitable.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
These are all off by one; the playback and bypass switches are the top
two bits of the registers, which are at shifts 7 and 6 not 8 and 7.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The condition for checking for XDAT being cleared was not correct.
Fixes: 36bcecd0a73eb ("ASoC: davinci-mcasp: Correct TX start sequence")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
This is using completely the wrong mask and value when updating the
register. Since the correct values are already defined in the header,
switch to using a table with explicit constants rather than shifting the
array index.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
|
|
'asoc/fix/sun4i-codec', 'asoc/fix/topology', 'asoc/fix/wm8960' and 'asoc/fix/wm8962' into asoc-linus
|
|
'asoc/fix/rcar', 'asoc/fix/rl6231', 'asoc/fix/rockchip' and 'asoc/fix/rt5670' into asoc-linus
|
|
'asoc/fix/fsl', 'asoc/fix/fsl-sai' and 'asoc/fix/intel' into asoc-linus
|
|
|
|
|
|
|
|
For DAPM resume, we should first change the power state of the
card and then recheck the endpoints. This ensures the dapm is
resumed first and then userspace can resume the streams.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix kernel-doc warnings in soc-ops.c:
..//sound/soc/soc-ops.c:415: warning: No description found for parameter 'ucontrol'
..//sound/soc/soc-ops.c:415: warning: Excess function parameter 'uinfo' description in 'snd_soc_put_volsw_sx'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add platform specific data for Terra project.
Signed-off-by: Luke_Yin@asus.com <Luke_Yin@asus.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Correct valid data word register value for 24 bit data width. The
bit value should be 10 (aka 0x2), not 0x10.
This fixes playback of 24 bit audio.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A new randconfig build failure shows that the fsl-asoc-card module
must not be built-in when the AC97 driver is a loadable module:
sound/built-in.o: In function `fsl_asoc_card_late_probe':
:(.text+0x571d8): undefined reference to `snd_ac97_update_bits'
I couldn't come up with a nice solution, so this adds another dependency
on "X || !X", which is the Kconfig way of saying that we have an
optional dependency on something that might be a loadable module.
Fixes: 50760cad9de9 ("ASoC: fsl-asoc-card: add AC'97 support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|