summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2016-10-16ALSA: usb-line6: use the same declaration as definition in header for MIDI ↵Takashi Sakamoto
manufacturer ID commit 8da08ca03b73593d5299893bf29fc08569c3fb5f upstream. Currently, usb-line6 module exports an array of MIDI manufacturer ID and usb-pod module uses it. However, the declaration is not the definition in common header. The difference is explicit length of array. Although compiler calculates it and everything goes well, it's better to use the same representation between definition and declaration. This commit fills the length of array for usb-line6 module. As a small good sub-effect, this commit suppress below warnings from static analysis by sparse v0.5.0. sound/usb/line6/driver.c:274:43: error: cannot size expression sound/usb/line6/driver.c:275:16: error: cannot size expression sound/usb/line6/driver.c:276:16: error: cannot size expression sound/usb/line6/driver.c:277:16: error: cannot size expression Fixes: 705ececd1c60 ("Staging: add line6 usb driver") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-16ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variantsAnssi Hannula
commit eb1a74b7bea17eea31915c4f76385cefe69d9795 upstream. The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") applies a custom dB map on the volume control when its range is reported as 0..50 (0 .. 0.2dB). However, there exists at least one other variant (hw v1.0c, as opposed to the tested v1.2) which reports a different non-sensical volume range (0..53) and the custom map is therefore not applied for that device. This results in all of the volume change appearing close to 100% on mixer UIs that utilize the dB TLV information. Add a fallback case where no dB TLV is reported at all if the control range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also restrict the quirk to only apply to the volume control as there is also a mute control which would match the check otherwise. Fixes: 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Reported-by: David W <regulars@d-dub.org.uk> Tested-by: David W <regulars@d-dub.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-16ALSA: ali5451: Fix out-of-bound position reportingTakashi Iwai
commit db68577966abc1aeae4ec597b3dcfa0d56e92041 upstream. The pointer callbacks of ali5451 driver may return the value at the boundary occasionally, and it results in the kernel warning like snd_ali5451 0000:00:06.0: BUG: , pos = 16384, buffer size = 16384, period size = 1024 It seems that folding the position offset is enough for fixing the warning and no ill-effect has been seen by that. Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Tested-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07ALSA: hda - Add the top speaker pin config for HP Spectre x360Takashi Iwai
commit 0eec880966e77bdbee0112989a2be67d92e39929 upstream. HP Spectre x360 with CX20724 codec has two speaker outputs while the BIOS sets up only the bottom one (NID 0x17) and disables the top one (NID 0x1d). This patch adds a fixup simply defining the proper pincfg for NID 0x1d so that the top speaker works as is. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=169071 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07ALSA: hda - Fix headset mic detection problem for several Dell laptopsHui Wang
commit 3f640970a41429f0a076c01270bbd014c9eae61c upstream. One of the laptops has the codec ALC256 on it, applying the ALC255_FIXUP_DELL1_MIC_NO_PRESENCE can fix the problem, the rest of laptops have the codec ALC295 on them, they are similar to machines with ALC225, applying the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE can fix the problem. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07ALSA: hda - Adding one more ALC255 pin definition for headset problemHui Wang
commit 392c9da24a994f238c5d7ea611c6245be4617014 upstream. We have two new Dell laptop models, they have the same ALC255 pin definition, but not in the pin quirk table yet, as a result, the headset microphone can't work. After adding the definition in the table, the headset microphone works well. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07ASoC: omap-mcpdm: Fix irq resource handlingPeter Ujfalusi
commit a8719670687c46ed2e904c0d05fa4cd7e4950cd1 upstream. Fixes: ddd17531ad908 ("ASoC: omap-mcpdm: Clean up with devm_* function") Managed irq request will not doing any good in ASoC probe level as it is not going to free up the irq when the driver is unbound from the sound card. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-07ASoC: Intel: Skylake: Fix error return code in skl_probe()Wei Yongjun
commit 979cf59acc9d634cc140aadd0d2915947ab303cc upstream. Fix to return error code -ENODEV from the error handling case instead of 0, as done elsewhere in this function. Fixes: 87b2bdf02278 ("ASoC: Intel: Skylake: Initialize NHLT table") Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Acked-By: Vinod Koul <vinod.kou@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: timer: fix NULL pointer dereference on memory allocation failureVegard Nossum
commit 8ddc05638ee42b18ba4fe99b5fb647fa3ad20456 upstream. I hit this with syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #190 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff88011278d600 task.stack: ffff8801120c0000 RIP: 0010:[<ffffffff82c8ba07>] [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100 RSP: 0018:ffff8801120c7a60 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000007 RDX: 0000000000000009 RSI: 1ffff10023483091 RDI: 0000000000000048 RBP: ffff8801120c7a78 R08: ffff88011a5cf768 R09: ffff88011a5ba790 R10: 0000000000000002 R11: ffffed00234b9ef1 R12: ffff880114843980 R13: ffffffff84213c00 R14: ffff880114843ab0 R15: 0000000000000286 FS: 00007f72958f3700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603001 CR3: 00000001126ab000 CR4: 00000000000006f0 Stack: ffff880114843980 ffff880111eb2dc0 ffff880114843a34 ffff8801120c7ad0 ffffffff82c81ab1 0000000000000000 ffffffff842138e0 0000000100000000 ffff880111eb2dd0 ffff880111eb2dc0 0000000000000001 ffff880111eb2dc0 Call Trace: [<ffffffff82c81ab1>] snd_timer_start1+0x331/0x670 [<ffffffff82c85bfd>] snd_timer_start+0x5d/0xa0 [<ffffffff82c8795e>] snd_timer_user_ioctl+0x88e/0x2830 [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90 [<ffffffff8132762f>] ? put_prev_entity+0x108f/0x21a0 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050 [<ffffffff813510af>] ? cpuacct_account_field+0x12f/0x1a0 [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200 [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0 [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0 [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0 [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0 [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: c7 c7 c4 b9 c8 82 48 89 d9 4c 89 ee e8 63 88 7f fe e8 7e 46 7b fe 48 8d 7b 48 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 84 c0 7e 65 80 7b 48 00 74 0e e8 52 46 RIP [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100 RSP <ffff8801120c7a60> ---[ end trace 5955b08db7f2b029 ]--- This can happen if snd_hrtimer_open() fails to allocate memory and returns an error, which is currently not checked by snd_timer_open(): ioctl(SNDRV_TIMER_IOCTL_SELECT) - snd_timer_user_tselect() - snd_timer_close() - snd_hrtimer_close() - (struct snd_timer *) t->private_data = NULL - snd_timer_open() - snd_hrtimer_open() - kzalloc() fails; t->private_data is still NULL ioctl(SNDRV_TIMER_IOCTL_START) - snd_timer_user_start() - snd_timer_start() - snd_timer_start1() - snd_hrtimer_start() - t->private_data == NULL // boom Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUEVegard Nossum
commit 6b760bb2c63a9e322c0e4a0b5daf335ad93d5a33 upstream. I got this: divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #189 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff8801120a9580 task.stack: ffff8801120b0000 RIP: 0010:[<ffffffff82c8bd9a>] [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0 RSP: 0018:ffff88011aa87da8 EFLAGS: 00010006 RAX: 0000000000004f76 RBX: ffff880112655e88 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880112655ea0 RDI: 0000000000000001 RBP: ffff88011aa87e00 R08: ffff88013fff905c R09: ffff88013fff9048 R10: ffff88013fff9050 R11: 00000001050a7b8c R12: ffff880114778a00 R13: ffff880114778ab4 R14: ffff880114778b30 R15: 0000000000000000 FS: 00007f071647c700(0000) GS:ffff88011aa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603001 CR3: 0000000112021000 CR4: 00000000000006e0 Stack: 0000000000000000 ffff880114778ab8 ffff880112655ea0 0000000000004f76 ffff880112655ec8 ffff880112655e80 ffff880112655e88 ffff88011aa98fc0 00000000b97ccf2b dffffc0000000000 ffff88011aa98fc0 ffff88011aa87ef0 Call Trace: <IRQ> [<ffffffff813abce7>] __hrtimer_run_queues+0x347/0xa00 [<ffffffff82c8bbc0>] ? snd_hrtimer_close+0x130/0x130 [<ffffffff813ab9a0>] ? retrigger_next_event+0x1b0/0x1b0 [<ffffffff813ae1a6>] ? hrtimer_interrupt+0x136/0x4b0 [<ffffffff813ae220>] hrtimer_interrupt+0x1b0/0x4b0 [<ffffffff8120f91e>] local_apic_timer_interrupt+0x6e/0xf0 [<ffffffff81227ad3>] ? kvm_guest_apic_eoi_write+0x13/0xc0 [<ffffffff83c35086>] smp_apic_timer_interrupt+0x76/0xa0 [<ffffffff83c3416c>] apic_timer_interrupt+0x8c/0xa0 <EOI> [<ffffffff83c3239c>] ? _raw_spin_unlock_irqrestore+0x2c/0x60 [<ffffffff82c8185d>] snd_timer_start1+0xdd/0x670 [<ffffffff82c87015>] snd_timer_continue+0x45/0x80 [<ffffffff82c88100>] snd_timer_user_ioctl+0x1030/0x2830 [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90 [<ffffffff815aa4f8>] ? handle_mm_fault+0xbc8/0x27f0 [<ffffffff815a9930>] ? __pmd_alloc+0x370/0x370 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050 [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200 [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0 [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0 [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0 [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0 [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: e8 fc 42 7b fe 8b 0d 06 8a 50 03 49 0f af cf 48 85 c9 0f 88 7c 01 00 00 48 89 4d a8 e8 e0 42 7b fe 48 8b 45 c0 48 8b 4d a8 48 99 <48> f7 f9 49 01 c7 e8 cb 42 7b fe 48 8b 55 d0 48 b8 00 00 00 00 RIP [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0 RSP <ffff88011aa87da8> ---[ end trace 6aa380f756a21074 ]--- The problem happens when you call ioctl(SNDRV_TIMER_IOCTL_CONTINUE) on a completely new/unused timer -- it will have ->sticks == 0, which causes a divide by 0 in snd_hrtimer_callback(). Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: timer: fix NULL pointer dereference in read()/ioctl() raceVegard Nossum
commit 11749e086b2766cccf6217a527ef5c5604ba069c upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: hda - Enable subwoofer on Dell Inspiron 7559Kai-Heng Feng
commit fd06c77eb9200b53d421da5fffe0dcd894b5d72a upstream. The subwoofer on Inspiron 7559 was disabled originally. Applying a pin fixup to node 0x1b can enable it and make it work. Old pin: 0x411111f0 New pin: 0x90170151 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: hda - Add headset mic quirk for Dell Inspiron 5468Shrirang Bagul
commit 311042d1b67d9a1856a8e1294e7729fb86f64014 upstream. This patch enables headset microphone on some variants of Dell Inspiron 5468. (Dell SSID 0x07ad) BugLink: https://bugs.launchpad.net/bugs/1617900 Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: rawmidi: Fix possible deadlock with virmidi registrationTakashi Iwai
commit 816f318b2364262a51024096da7ca3b84e78e3b5 upstream. When a seq-virmidi driver is initialized, it registers a rawmidi instance with its callback to create an associated seq kernel client. Currently it's done throughly in rawmidi's register_mutex context. Recently it was found that this may lead to a deadlock another rawmidi device that is being attached with the sequencer is accessed, as both open with the same register_mutex. This was actually triggered by syzkaller, as Dmitry Vyukov reported: ====================================================== [ INFO: possible circular locking dependency detected ] 4.8.0-rc1+ #11 Not tainted ------------------------------------------------------- syz-executor/7154 is trying to acquire lock: (register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 but task is already holding lock: (&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&grp->list_mutex){++++.+}: [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22 [< inline >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681 [<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822 [<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418 [<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101 [<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297 [< inline >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383 [<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450 [<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645 [<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164 [< inline >] __snd_device_register sound/core/device.c:162 [<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212 [<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749 [<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123 [<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564 ...... -> #0 (register_mutex#5){+.+.+.}: [< inline >] check_prev_add kernel/locking/lockdep.c:1829 [< inline >] check_prevs_add kernel/locking/lockdep.c:1939 [< inline >] validate_chain kernel/locking/lockdep.c:2266 [<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335 [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [< inline >] __mutex_lock_common kernel/locking/mutex.c:521 [<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621 [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 [<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188 [< inline >] subscribe_port sound/core/seq/seq_ports.c:427 [<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510 [<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579 [<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480 [<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225 [<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440 [<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375 [<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281 [<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274 [<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138 [<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639 ...... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&grp->list_mutex); lock(register_mutex#5); lock(&grp->list_mutex); lock(register_mutex#5); *** DEADLOCK *** ====================================================== The fix is to simply move the registration parts in snd_rawmidi_dev_register() to the outside of the register_mutex lock. The lock is needed only to manage the linked list, and it's not necessarily to cover the whole initialization process. Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: fireworks: accessing to user space outside spinlockTakashi Sakamoto
commit 6b1ca4bcadf9ef077cc5f03c6822ba276ed14902 upstream. In hwdep interface of fireworks driver, accessing to user space is in a critical section with disabled local interrupt. Depending on architecture, accessing to user space can cause page fault exception. Then local processor stores machine status and handles the synchronous event. A handler corresponding to the event can call task scheduler to wait for preparing pages. In a case of usage of single core processor, the state to disable local interrupt is worse because it don't handle usual interrupts from hardware. This commit fixes this bug, performing the accessing outside spinlock. This commit also gives up counting the number of queued response messages to simplify ring-buffer management. Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com> Fixes: 555e8a8f7f14('ALSA: fireworks: Add command/response functionality into hwdep interface') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: firewire-tascam: accessing to user space outside spinlockTakashi Sakamoto
commit 04b2d9c9c319277ad4fbbb71855c256a9f4d5f98 upstream. In hwdep interface of firewire-tascam driver, accessing to user space is in a critical section with disabled local interrupt. Depending on architecture, accessing to user space can cause page fault exception. Then local processor stores machine status and handle the synchronous event. A handler corresponding to the event can call task scheduler to wait for preparing pages. In a case of usage of single core processor, the state to disable local interrupt is worse because it doesn't handle usual interrupts from hardware. This commit fixes this bug, by performing the accessing outside spinlock. Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com> Fixes: e5e0c3dd257b('ALSA: firewire-tascam: add hwdep interface') Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: usb-audio: Add sample rate inquiry quirk for B850V3 CP2114Ken Lin
commit 83d9956b7e6b310c1062df7894257251c625b22e upstream. Avoid getting sample rate on B850V3 CP2114 as it is unsupported and causes noisy "current rate is different from the runtime rate" messages when playback starts. Signed-off-by: Ken Lin <ken.lin@advantech.com.tw> Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startupChristoph Huber
commit 3e103a65514c2947e53f3171b21255fbde8b60c6 upstream. commit cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and shutdown") refactored code such that the SSC is reset on every startup; this breaks duplex audio (e.g. first start audio playback, then start record, causing the playback to stop/hang) Fixes: cbaadf0f90d6 (ASoC: atmel_ssc_dai: refactor the startup and shutdown) Signed-off-by: Christoph Huber <c.huber@bct-electronic.com> Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: hda: add AMD Polaris-10/11 AZ PCI IDs with proper driver capsMaruthi Srinivas Bayyavarapu
[ Upstream commit 8eb22214b7cb0c0a28be6caf3b81201629d8ea7c ] This commit fixes garbled audio on Polaris-10/11 variants Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-15ALSA: hda - add codec support for Kabylake display audio codecLibin Yang
[ Upstream commit 91815d8aa7e2f45d30e51caa297061ad893628d9 ] This patch adds codec ID (0x8086280b) for Kabylake display codec and apply the hsw fix-ups to Kabylake. Signed-off-by: Libin Yang <libin.yang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ALSA: line6: Fix POD sysfs attributes segfaultAndrej Krutak
commit b027d11263836a0cd335520175257dcb99b43757 upstream. The commit 02fc76f6a changed base of the sysfs attributes from device to card. The "show" callbacks dereferenced wrong objects because of this. Fixes: 02fc76f6a7db ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()') Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ALSA: line6: Give up on the lock while URBs are released.Andrej Krutak
commit adc8a43a6d6688272ebffa81789fa857e603dec6 upstream. Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(), which in turn invokes audio_out_callback(), which tries to lock 2nd time. Fixes: ============================================= [ INFO: possible recursive locking detected ] 4.4.15+ #15 Not tainted --------------------------------------------- mplayer/3591 is trying to acquire lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6] but task is already holding lock: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&line6pcm->out.lock)->rlock); lock(&(&line6pcm->out.lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by mplayer/3591: #0: (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm] #1: (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm] #2: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6] stack backtrace: CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15 Hardware name: Generic AM33XX (Flattened Device Tree) [<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14) [<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac) [<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780) [<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0) [<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c) [<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6]) [<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0) [<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98) [<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114) [<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98) [<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6]) [<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6]) [<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6]) [<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm]) [<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm]) [<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm]) [<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm]) [<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm]) [<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm]) [<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm]) [<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8) Fixes: 63e20df1e5b2 ('ALSA: line6: Reorganize PCM stream handling') Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ALSA: line6: Remove double line6_pcm_release() after failed acquire.Andrej Krutak
commit 7e4379eae0e31994ea645db1d13006ea8e5ce539 upstream. If there's an error, pcm is released in line6_pcm_acquire already. Fixes: 247d95ee6dd2 ('ALSA: line6: Handle error from line6_pcm_acquire()') Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ALSA: hda - Manage power well properly for resumeTakashi Iwai
commit a52ff34e5ec61749c62c6618b76a9d6dbecee450 upstream. For SKL and later Intel chips, we control the power well per codec basis via link_power callback since the commit [03b135cebc47: ALSA: hda - remove dependency on i915 power well for SKL]. However, there are a few exceptional cases where the gfx registers are accessed from the audio driver: namely the wakeup override bit toggling at (both system and runtime) resume. This seems causing a kernel warning when accessed during the power well down (and likely resulting in the bogus register accesses). This patch puts the proper power up / down sequence around the resume code so that the wakeup bit is fiddled properly while the power is up. (The other callback, sync_audio_rate, is used only in the PCM callback, so it's guaranteed in the power-on.) Also, by this proper power up/down, the instantaneous flip of wakeup bit in the resume callback that was introduced by the commit [033ea349a7cd: ALSA: hda - Fix Skylake codec timeout] becomes superfluous, as snd_hdac_display_power() already does it. So we can clean it up together. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214 Fixes: 03b135cebc47 ('ALSA: hda - remove dependency on i915 power well for SKL') Cc: <stable@vger.kernel.org> # v4.2+ Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ALSA: usb-audio: Add quirk for ELP HD USB CameraVittorio Gambaletta (VittGam)
commit 41f5e3bdbf706a9e98194bf0c4b62a875c02f170 upstream. The ELP HD USB Camera (05a3:9420) needs this quirk for suppressing the unsupported sample rate inquiry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481 Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07ALSA: usb-audio: Add a sample rate quirk for Creative Live! Cam Socialize HD ↵Piotr Karasinski
(VF0610) commit 7627e40c66b5547e12b6c5673646ceea84797a74 upstream. VF0610 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x82". This patch adds the USB ID (0x041E:4080) to snd_usb_get_sample_rate_quirk() list. Signed-off-by: Piotr Karasinski <peter.karasinski@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20ALSA: hda - Fix headset mic detection problem for two dell machinesHui Wang
commit 59ec4b57bcaede46546d54d037a21004b9aa5cef upstream. One of the machines has ALC255 on it, another one has ALC298 on it. On the machine with the codec ALC298, it also has the speaker volume problem, so we add the fixup chained to ALC298_FIXUP_SPK_VOLUME rather than adding a group of pin definition in the pin quirk table, since the speak volume problem does not happen on other machines yet. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20ALSA: hda: add AMD Bonaire AZ PCI ID with proper driver capsMaruthi Srinivas Bayyavarapu
commit fd48331f9b71d2add941adaee3619f5b8527182d upstream. This commit fixes garbled audio on Bonaire HDMI Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIOHui Wang
commit dd9aa335c88003d131ac874e7f6809902de0b847 upstream. We have a Dell AIO on which we can't adjust its speaker's volume. The problem is it is connected to a Audio Output node without Amp-out capability. To fix it, we change it to be connnected to a node with Amp-out capability. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-20ALSA: hda: Fix krealloc() with __GFP_ZERO usageTakashi Iwai
commit 33baefe5e72f17a6df378e48196cd8cada11deec upstream. krealloc() doesn't work always properly with __GFP_ZERO flag as expected. For clearing the reallocated area, we need to clear explicitly instead. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10ALSA: timer: Fix leak in events via snd_timer_user_tinterruptKangjie Lu
commit e4ec8cc8039a7063e24204299b462bd1383184a5 upstream. The stack object “r1” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10ALSA: timer: Fix leak in events via snd_timer_user_ccallbackKangjie Lu
commit 9a47e9cff994f37f7f0dbd9ae23740d0f64f9fe6 upstream. The stack object “r1” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10ALSA: timer: Fix leak in SNDRV_TIMER_IOCTL_PARAMSKangjie Lu
commit cec8f96e49d9be372fdb0c3836dcf31ec71e457e upstream. The stack object “tread” has a total size of 32 bytes. Its field “event” and “val” both contain 4 bytes padding. These 8 bytes padding bytes are sent to user without being initialized. Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: hda: add AMD Stoney PCI ID with proper driver capsAwais Belal
commit d716fb03f76411fc7e138692e33b749cada5c094 upstream. This allows the device to correctly show up as ATI HDMI rather than a generic one and allows the driver to use the available caps. Signed-off-by: Awais Belal <awais_belal@mentor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: hda - fix use-after-free after module unloadPeter Wu
commit ab58d8cc870ef3f0771c197700441936898d1f1d upstream. register_vga_switcheroo() sets the PM ops from the hda structure which is freed later in azx_free. Make sure that these ops are cleared. Caught by KASAN, initially noticed due to a general protection fault. Fixes: 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)") Signed-off-by: Peter Wu <peter@lekensteyn.nl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: ctl: Stop notification after disconnectionTakashi Iwai
commit f388cdcdd160687c6650833f286b9c89c50960ff upstream. snd_ctl_remove() has a notification for the removal event. It's superfluous when done during the device got disconnected. Although the notification itself is mostly harmless, it may potentially be harmful, and should be suppressed. Actually some components PCM may free ctl elements during the disconnect or free callbacks, thus it's no theoretical issue. This patch adds the check of card->shutdown flag for avoiding unnecessary notifications after (or during) the disconnect. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: pcm: Free chmap at PCM free callback, tooTakashi Iwai
commit a8ff48cb70835f48de5703052760312019afea55 upstream. The chmap ctls assigned to PCM streams are freed in the PCM disconnect callback. However, since the disconnect callback isn't called when the card gets freed before registering, the chmap ctls may still be left assigned. They are eventually freed together with other ctls, but it may cause an Oops at pcm_chmap_ctl_private_free(), as the function refers to the assigned PCM stream, while the PCM objects have been already freed beforehand. The fix is to free the chmap ctls also at PCM free callback, not only at PCM disconnect. Reported-by: Laxminath Kasam <b_lkasam@codeaurora.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: hda/realtek - add new pin definition in alc225 pin quirk tableHui Wang
commit 8a132099f080d7384bb6ab4cc168f76cb4b47d08 upstream. We have some Dell laptops which can't detect headset mic, the machines use the codec ALC225, they have some new pin configuration values, after adding them in the alc225 pin quirk table, they work well. Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: hda - fix read before array startBob Copeland
commit 81e43960dce1c8e58e682fb3ec26c1d8f83a9afc upstream. UBSAN reports the following warning from accessing path->path[-1] in set_path_power(): [ 16.078040] ================================================================================ [ 16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17 [ 16.078198] index -1 is out of range for type 'hda_nid_t [10]' [ 16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ #47 [ 16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012 [ 16.078278] ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032 [ 16.078286] ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d [ 16.078294] ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292 [ 16.078302] Call Trace: [ 16.078311] [<ffffffff815c4fe3>] dump_stack+0x86/0xd3 [ 16.078317] [<ffffffff8162443d>] ubsan_epilogue+0xd/0x40 [ 16.078324] [<ffffffff81624af7>] __ubsan_handle_out_of_bounds+0x67/0x70 [ 16.078335] [<ffffffffa087665f>] set_path_power+0x1bf/0x230 [snd_hda_codec_generic] [ 16.078344] [<ffffffffa087880d>] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic] [ 16.078352] [<ffffffffa087f190>] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic] [ 16.078360] [<ffffffffa0878947>] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic] [ 16.078370] [<ffffffffa08842b3>] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic] [ 16.078376] [<ffffffff81173360>] ? trace_hardirqs_on_caller+0x1b0/0x2c0 [ 16.078390] [<ffffffffa089df27>] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek] [ 16.078402] [<ffffffffa08a332a>] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek] [ 16.078417] [<ffffffffa0838644>] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec] [ 16.078424] [<ffffffff817bbac1>] driver_probe_device+0x101/0x380 [ 16.078430] [<ffffffff817bbdf9>] __driver_attach+0xb9/0x100 [ 16.078438] [<ffffffff817bbd40>] ? driver_probe_device+0x380/0x380 [ 16.078444] [<ffffffff817b8d20>] bus_for_each_dev+0x70/0xc0 [ 16.078449] [<ffffffff817bb087>] driver_attach+0x27/0x50 [ 16.078454] [<ffffffff817ba956>] bus_add_driver+0x166/0x2c0 [ 16.078460] [<ffffffffa0369000>] ? 0xffffffffa0369000 [ 16.078465] [<ffffffff817bd13d>] driver_register+0x7d/0x130 [ 16.078477] [<ffffffffa083816f>] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec] [ 16.078488] [<ffffffffa036901e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek] [ 16.078493] [<ffffffff8100215e>] do_one_initcall+0x4e/0x1d0 [ 16.078499] [<ffffffff8119f54d>] ? rcu_read_lock_sched_held+0x6d/0x80 [ 16.078504] [<ffffffff813701b1>] ? kmem_cache_alloc_trace+0x391/0x560 [ 16.078510] [<ffffffff812bb314>] ? do_init_module+0x28/0x273 [ 16.078515] [<ffffffff812bb387>] do_init_module+0x9b/0x273 [ 16.078522] [<ffffffff811e3782>] load_module+0x20b2/0x3410 [ 16.078527] [<ffffffff811df140>] ? m_show+0x210/0x210 [ 16.078533] [<ffffffff813b2b26>] ? kernel_read+0x66/0xe0 [ 16.078541] [<ffffffff811e4cfa>] SYSC_finit_module+0xba/0xc0 [ 16.078547] [<ffffffff811e4d1e>] SyS_finit_module+0xe/0x10 [ 16.078552] [<ffffffff81a860fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd [ 16.078556] ================================================================================ Fix by checking path->depth before use. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: hda - Add PCI ID for Kabylake-HVinod Koul
commit 6858107e78b4ecb9f244db814ffbdba1b5ce759b upstream. Kabylake-H shows up as PCI ID 0xa2f0. We missed adding this earlier with other KBL IDs. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: hda/realtek: Add Lenovo L460 to docking unit fixupTorsten Hilbrich
commit 9cd25743765cfe851aed8d655a62d60156aed293 upstream. This solves the issue that a headphone is not working on the docking unit. Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: timer: Fix negative queue usage by racy accessesTakashi Iwai
commit 3fa6993fef634e05d200d141a85df0b044572364 upstream. The user timer tu->qused counter may go to a negative value when multiple concurrent reads are performed since both the check and the decrement of tu->qused are done in two individual locked contexts. This results in bogus read outs, and the endless loop in the user-space side. The fix is to move the decrement of the tu->qused counter into the same spinlock context as the zero-check of the counter. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: echoaudio: Fix memory allocationChristophe JAILLET
commit 9c6795a9b3cbb56a9fbfaf43909c5c22999ba317 upstream. 'commpage_bak' is allocated with 'sizeof(struct echoaudio)' bytes. We then copy 'sizeof(struct comm_page)' bytes in it. On my system, smatch complains because one is 2960 and the other is 3072. This would result in memory corruption or a oops. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: au88x0: Fix calculation in vortex_wtdma_bufshift()Takashi Iwai
commit 62db7152c924e4c060e42b34a69cd39658e8a0dc upstream. vortex_wtdma_bufshift() function does calculate the page index wrongly, first masking then shift, which always results in zero. The proper computation is to first shift, then mask. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: hda / realtek - add two more Thinkpad IDs (5050,5053) for tpt460 fixupJaroslav Kysela
commit 0f087ee3f3b86a4507db4ff1d2d5a3880e4cfd16 upstream. See: https://bugzilla.redhat.com/show_bug.cgi?id=1349539 See: https://bugzilla.kernel.org/show_bug.cgi?id=120961 Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: hda - Fix the headset mic jack detection on Dell machineWoodrow Shen
commit f83c32925d45926cd0e0f18bf28e6039116c4486 upstream. The new Dell laptop with codec 3246 can't detect headset mic when headset was inserted on the machine. So adding pin configurations into quirk table makes headset mic work correctly. Codec: Realtek ALC3246 Vendor Id: 0x10ec0256 Subsystem Id: 0x10280781 Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-07-27ALSA: dummy: Fix a use-after-free at closingTakashi Iwai
commit d5dbbe6569481bf12dcbe3e12cff72c5f78d272c upstream. syzkaller fuzzer spotted a potential use-after-free case in snd-dummy driver when hrtimer is used as backend: > ================================================================== > BUG: KASAN: use-after-free in rb_erase+0x1b17/0x2010 at addr ffff88005e5b6f68 > Read of size 8 by task syz-executor/8984 > ============================================================================= > BUG kmalloc-192 (Not tainted): kasan: bad access detected > ----------------------------------------------------------------------------- > > Disabling lock debugging due to kernel taint > INFO: Allocated in 0xbbbbbbbbbbbbbbbb age=18446705582212484632 > .... > [< none >] dummy_hrtimer_create+0x49/0x1a0 sound/drivers/dummy.c:464 > .... > INFO: Freed in 0xfffd8e09 age=18446705496313138713 cpu=2164287125 pid=-1 > [< none >] dummy_hrtimer_free+0x68/0x80 sound/drivers/dummy.c:481 > .... > Call Trace: > [<ffffffff8179e59e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:333 > [< inline >] rb_set_parent include/linux/rbtree_augmented.h:111 > [< inline >] __rb_erase_augmented include/linux/rbtree_augmented.h:218 > [<ffffffff82ca5787>] rb_erase+0x1b17/0x2010 lib/rbtree.c:427 > [<ffffffff82cb02e8>] timerqueue_del+0x78/0x170 lib/timerqueue.c:86 > [<ffffffff814d0c80>] __remove_hrtimer+0x90/0x220 kernel/time/hrtimer.c:903 > [< inline >] remove_hrtimer kernel/time/hrtimer.c:945 > [<ffffffff814d23da>] hrtimer_try_to_cancel+0x22a/0x570 kernel/time/hrtimer.c:1046 > [<ffffffff814d2742>] hrtimer_cancel+0x22/0x40 kernel/time/hrtimer.c:1066 > [<ffffffff85420531>] dummy_hrtimer_stop+0x91/0xb0 sound/drivers/dummy.c:417 > [<ffffffff854228bf>] dummy_pcm_trigger+0x17f/0x1e0 sound/drivers/dummy.c:507 > [<ffffffff85392170>] snd_pcm_do_stop+0x160/0x1b0 sound/core/pcm_native.c:1106 > [<ffffffff85391b26>] snd_pcm_action_single+0x76/0x120 sound/core/pcm_native.c:956 > [<ffffffff85391e01>] snd_pcm_action+0x231/0x290 sound/core/pcm_native.c:974 > [< inline >] snd_pcm_stop sound/core/pcm_native.c:1139 > [<ffffffff8539754d>] snd_pcm_drop+0x12d/0x1d0 sound/core/pcm_native.c:1784 > [<ffffffff8539d3be>] snd_pcm_common_ioctl1+0xfae/0x2150 sound/core/pcm_native.c:2805 > [<ffffffff8539ee91>] snd_pcm_capture_ioctl1+0x2a1/0x5e0 sound/core/pcm_native.c:2976 > [<ffffffff8539f2ec>] snd_pcm_kernel_ioctl+0x11c/0x160 sound/core/pcm_native.c:3020 > [<ffffffff853d9a44>] snd_pcm_oss_sync+0x3a4/0xa30 sound/core/oss/pcm_oss.c:1693 > [<ffffffff853da27d>] snd_pcm_oss_release+0x1ad/0x280 sound/core/oss/pcm_oss.c:2483 > ..... A workaround is to call hrtimer_cancel() in dummy_hrtimer_sync() which is called certainly before other blocking ops. Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24ALSA: hda/realtek: Add T560 docking unit fixupTorsten Hilbrich
commit dab38e43b298501a4e8807b56117c029e2e98383 upstream. Tested with Lenovo Ultradock. Fixes the non-working headphone jack on the docking unit. Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703Kailang Yang
commit 6fbae35a3170c3e2b1b9d7b9cc943cbe48771362 upstream. Support new codecs for ALC700/ALC701/ALC703. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-24ALSA: hda/realtek - ALC256 speaker noise issueKailang Yang
commit e69e7e03ed225abf3e1c43545aa3bcb68dc81d5f upstream. That is some different register for ALC255 and ALC256. ALC256 can't fit with some ALC255 register. This issue is cause from LDO output voltage control. This patch is updated the right LDO register value. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 17:42:13 +0000