| Age | Commit message (Collapse) | Author |
|---|
|
Some attribute-set have a documentation (doc:), but it was not displayed
in the RST / HTML version. Such field can be found in ethtool, netdev,
tcp_metrics and team YAML files.
Only the 'name' and 'attributes' fields from an 'attribute-set' section
were parsed. Now the content of the 'doc' field, if available, is added
as a new paragraph before listing each attribute. This is similar to
what is done when parsing the 'operations'.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250913-net-next-ynl-attr-doc-rst-v3-1-4f06420d87db@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is better to use 'not in' instead of 'not {element} in {collection}'
according to Ruff.
This is linked to Ruff error E713 [1]:
Testing membership with {element} not in {collection} is more readable.
Link: https://docs.astral.sh/ruff/rules/not-in-test/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-8-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is better to use the 'is' keyword instead of comparing to None
according to Ruff.
This is linked to Ruff error E711 [1]:
According to PEP 8, "Comparisons to singletons like None should always
be done with is or is not, never the equality operators."
Link: https://docs.astral.sh/ruff/rules/none-comparison/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-7-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These semicolons are not required according to Ruff. Simply remove them.
This is linked to Ruff error E703 [1]:
A trailing semicolon is unnecessary and should be removed.
Link: https://docs.astral.sh/ruff/rules/useless-semicolon/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-6-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These imports are not used according to Ruff, and can be safely removed.
This is linked to Ruff error F401 [1]:
Unused imports add a performance overhead at runtime, and risk
creating import cycles. They also increase the cognitive load of
reading the code.
There is one exception with 'YnlDocGenerator' which is added in __all__:
it is used by ynl_gen_rst.py.
Link: https://docs.astral.sh/ruff/rules/unused-import/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-5-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
'f-strings' without any placeholders don't need to be marked as such
according to Ruff. This 'f' can be safely removed.
This is linked to Ruff error F541 [1]:
f-strings are a convenient way to format strings, but they are not
necessary if there are no placeholder expressions to format. In this
case, a regular string should be used instead, as an f-string without
placeholders can be confusing for readers, who may expect such a
placeholder to be present.
Link: https://docs.astral.sh/ruff/rules/f-string-missing-placeholders/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-4-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These variables are assigned but never used according to Ruff. They can
then be safely removed.
This is linked to Ruff error F841 [1]:
A variable that is defined but not used is likely a mistake, and
should be removed to avoid confusion.
Link: https://docs.astral.sh/ruff/rules/unused-variable/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-3-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This 'except' was used without specifying the exception class according
to Ruff. Here, only the ValueError class is expected and handled.
This is linked to Ruff error E722 [1]:
A bare except catches BaseException which includes KeyboardInterrupt,
SystemExit, Exception, and others. Catching BaseException can make it
hard to interrupt the program (e.g., with Ctrl-C) and can disguise
other problems.
Link: https://docs.astral.sh/ruff/rules/bare-except/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-2-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This variable used in the error path was not defined according to Ruff.
msg_format.attr_set is used instead, presumably the one that was
supposed to be used originally.
This is linked to Ruff error F821 [1]:
An undefined name is likely to raise NameError at runtime.
Fixes: 1769e2be4baa ("tools/net/ynl: Add 'sub-message' attribute decoding to ynl")
Link: https://docs.astral.sh/ruff/rules/undefined-name/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-1-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.17-rc5).
No conflicts.
Adjacent changes:
include/net/sock.h
c51613fa276f ("net: add sk->sk_drop_counters")
5d6b58c932ec ("net: lockless sock_i_ino()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The blamed commit introduced the concept of split attribute
counting, and later allocating an array to hold them, however
TypeArrayNest wasn't updated to use the new counting variable.
Abbreviated example from tools/net/ynl/generated/nl80211-user.c:
nl80211_if_combination_attributes_parse(...):
unsigned int n_limits = 0;
[...]
ynl_attr_for_each(attr, nlh, yarg->ys->family->hdr_len)
if (type == NL80211_IFACE_COMB_LIMITS)
ynl_attr_for_each_nested(attr2, attr)
dst->_count.limits++;
if (n_limits) {
dst->_count.limits = n_limits;
/* allocate and parse attributes */
}
In the above example n_limits is guaranteed to always be 0,
hence the conditional is unsatisfiable and is optimized out.
This patch changes the attribute counting to use n_limits++ in the
attribute counting loop in the above example.
Fixes: 58da455b31ba ("tools: ynl-gen: improve unwind on parsing errors")
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250902160001.760953-1-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch changes the generated min-len check for binary
attributes to use the NLA_POLICY_MIN_LEN() macro, thereby the
generated code supports strict policy validation.
With this change TypeBinary will always generate a NLA_BINARY
attribute policy.
This doesn't change any currently generated code, as it isn't
used in any specs currently used for generating code.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-3-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of printing line numbers from the temp converted ReST
file, get them from the original source.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When something goes wrong, we want Sphinx error to point to the
right line number from the original source, not from the
processed ReST data.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
As we're now using an index file with a glob, there's no need
to generate index files anymore.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
|
|
Cleanup some coding style issues pointed by pylint and flake8.
No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
|
|
As we'll be using the Netlink specs parser inside a Sphinx
extension, move the library part from the command line parser.
While here, change the code which generates an index file
to parse inputs from both .rst and .yaml extensions. With
that, the tool can easily be tested with:
tools/net/ynl/pyynl/ynl_gen_rst.py -x -o Documentation/netlink/specs/foo.rst
Without needing to first generate a temp directory with the
rst files.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
|
|
Currently, rt documents are referred with:
Documentation/userspace-api/netlink/netlink-raw.rst: :doc:`rt-link<../../networking/netlink_spec/rt-link>`
Documentation/userspace-api/netlink/netlink-raw.rst: :doc:`tc<../../networking/netlink_spec/tc>`
Documentation/userspace-api/netlink/netlink-raw.rst: :doc:`tc<../../networking/netlink_spec/tc>`
Having :doc: references with relative paths doesn't always work,
as it may have troubles when O= is used. Also that's hard to
maintain, and may break if we change the way rst files are
generated from yaml. Better to use instead a reference for
the netlink family.
So, replace them by Sphinx cross-reference tag that are
created by ynl_gen_rst.py.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
|
|
For basic types we "flatten" setters. If a request "a" has a simple
nest "b" with value "val" we print helpers like:
req_set_a_b(struct a *req, int val)
{
req->_present.a = 1;
req->b._present.val = 1;
req->b.val = ...
}
This is not possible for multi-attr because they have to be allocated
dynamically by the user. Print "object level" setters so that user
preparing the object doesn't have to futz with the presence bits
and other YNL internals.
Add the ability to pass in the variable name to generated setters.
Using "req" here doesn't feel right, while the attr is part of a request
it's not the request itself, so it seems cleaner to call it "obj".
Example:
static inline void
netdev_queue_id_set_id(struct netdev_queue_id *obj, __u32 id)
{
obj->_present.id = 1;
obj->id = id;
}
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In general YNL provides allocation and free helpers for types.
For pure nested structs which are used as multi-attr (and therefore
have to be allocated dynamically) we already print a free helper
as it's needed by free of the containing struct.
Add printing of the alloc helper for consistency. The helper
takes the number of entries to allocate as an argument, e.g.:
static inline struct netdev_queue_id *netdev_queue_id_alloc(unsigned int n)
{
return calloc(n, sizeof(struct netdev_queue_id));
}
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just to avoid making the main function even more enormous,
before adding more things to print move the free printing
to a helper which already prints the type.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Don't add _req to helper names for pure types. We don't currently
print those so it makes no difference to existing codegen.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250723171046.4027470-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We support decoding a binary type with a scalar subtype already,
add support for sending such arrays to the kernel. While at it
also support using "None" to indicate that the binary attribute
should be empty. I couldn't decide whether empty binary should
be [] or None, but there should be no harm in supporting both.
Link: https://patch.msgid.link/20250716000331.1378807-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We default to raising an exception when unknown attrs are found
to make sure those are noticed during development.
When YNL CLI is "installed" and used by sysadmins erroring out
is not going to be helpful. It's far more likely the user space
is older than the kernel in that case, than that some attr is
misdefined or missing.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend the process_unknown handing to enum values and flags.
Tested by removing entries from rt-link.yaml and rt-neigh.yaml:
./tools/net/ynl/pyynl/cli.py --family rt-link --dump getlink \
--process-unknown --output-json | jq '.[0] | ."ifi-flags"'
[
"up",
"Unknown(6)",
"loopback",
"Unknown(16)"
]
./tools/net/ynl/pyynl/cli.py --family rt-neigh --dump getneigh \
--process-unknown --output-json | jq '.[] | ."ndm-type"'
"unicast"
"Unknown(5)"
"Unknown(5)"
"unicast"
"Unknown(5)"
"unicast"
"broadcast"
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use enum decoding on auto-ints. Looks like we only had enum
auto-ints for input values until now. Upcoming RSS work will
need this to declare an attribute with flags as a uint.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250708220640.2738464-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The multi message support loosened the connection between the request
and response handling, as we can now submit multiple requests before
we start processing responses. Passing the attr set to NlMsgs decoding
no longer makes sense (if it ever did), attr set may differ message
by messsage. Isolate the part of decoding responsible for attr-set
specific interpretation and call it once we identified the correct op.
Without this fix performing SET operation on an ethtool socket, while
being subscribed to notifications causes:
# File "tools/net/ynl/pyynl/lib/ynl.py", line 1096, in _op
# Exception| return self._ops(ops)[0]
# Exception| ~~~~~~~~~^^^^^
# File "tools/net/ynl/pyynl/lib/ynl.py", line 1040, in _ops
# Exception| nms = NlMsgs(reply, attr_space=op.attr_set)
# Exception| ^^^^^^^^^^^
The value of op we use on line 1040 is stale, it comes form the previous
loop. If a notification comes before a response we will update op to None
and the next iteration thru the loop will break with the trace above.
Fixes: 6fda63c45fe8 ("tools/net/ynl: fix cli.py --subscribe feature")
Fixes: ba8be00f68f5 ("tools/net/ynl: Add multi message support to ynl")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250618171746.1201403-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
|
Pull nfsd updates from Chuck Lever:
"The marquee feature for this release is that the limit on the maximum
rsize and wsize has been raised to 4MB. The default remains at 1MB,
but risk-seeking administrators now have the ability to try larger I/O
sizes with NFS clients that support them. Eventually the default
setting will be increased when we have confidence that this change
will not have negative impact.
With v6.16, NFSD now has its own debugfs file system where we can add
experimental features and make them available outside of our
development community without impacting production deployments. The
first experimental setting added is one that makes all NFS READ
operations use vfs_iter_read() instead of the NFSD splice actor. The
plan is to eventually retire the splice actor, as that will enable a
number of new capabilities such as the use of struct bio_vec from the
top to the bottom of the NFSD stack.
Jeff Layton contributed a number of observability improvements. The
use of dprintk() in a number of high-traffic code paths has been
replaced with static trace points.
This release sees the continuation of efforts to harden the NFSv4.2
COPY operation. Soon, the restriction on async COPY operations can be
lifted.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.16 development cycle"
* tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (60 commits)
xdrgen: Fix code generated for counted arrays
SUNRPC: Bump the maximum payload size for the server
NFSD: Add a "default" block size
NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
NFSD: Remove NFSD_BUFSIZE
sunrpc: Remove the RPCSVC_MAXPAGES macro
svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages
svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages
sunrpc: Adjust size of socket's receive page array dynamically
SUNRPC: Remove svc_rqst :: rq_vec
SUNRPC: Remove svc_fill_write_vector()
NFSD: Use rqstp->rq_bvec in nfsd_iter_write()
SUNRPC: Export xdr_buf_to_bvec()
NFSD: De-duplicate the svc_fill_write_vector() call sites
NFSD: Use rqstp->rq_bvec in nfsd_iter_read()
sunrpc: Replace the rq_bvec array with dynamically-allocated memory
sunrpc: Replace the rq_pages array with dynamically-allocated memory
sunrpc: Remove backchannel check in svc_init_buffer()
sunrpc: Add a helper to derive maxpages from sv_max_mesg
svcrdma: Reduce the number of rdma_rw contexts per-QP
...
|
|
Extend the Python YNL extack decoding to handle sub-messages in the same
way that YNL C does. This involves retaining the input values so that
they are available during extack decoding.
./tools/net/ynl/pyynl/cli.py --family rt-link --do newlink --create \
--json '{
"linkinfo": {"kind": "netkit", "data": {"policy": 10} }
}'
Netlink error: Invalid argument
nl_len = 92 (76) nl_flags = 0x300 nl_type = 2
error: -22
extack: {'msg': 'Provided default xmit policy not supported', 'bad-attr': '.linkinfo.data(netkit).policy'}
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250523103031.80236-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a very simple TC dump sample with decoding of fq_codel attrs:
# ./tools/net/ynl/samples/tc
dummy0: fq_codel limit: 10240p target: 5ms new_flow_cnt: 0
proving that selector passing (for stats) works.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-13-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are ready to support most of TC. Enable C code gen.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TC uses all possible sub-message formats:
- nested attrs
- fixed headers + nested attrs
- fixed headers
- empty
Nested attrs are already supported for rt-link. Add support
for remaining 3. The empty and fixed headers ones are fairly
trivial, we can fake a Binary or Flags type instead of a Nest.
For fixed headers + nest we need to teach nest parsing and
nest put to handle fixed headers.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The _multi_parse() helper calls the _attr_get() method of each attr,
but it only respects what code the helper wants to emit, not what
local variables it needs. Local variables will soon be needed,
support them.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RenderInfo describes a request-response exchange. Struct describes
a parsed attribute set. For ease of parsing sub-messages with
fixed headers move fixed header info from RenderInfo to Struct.
No functional changes.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rtnetlink all submessages had the selector at the same level
of nesting as the submessage. We could refer to the relevant
attribute from the current struct. In TC, stats are one level
of nesting deeper than "kind". Teach the code-gen about structs
which need to be passed a selector by the caller for parsing.
Because structs are "topologically sorted" one pass of propagating
the selectors down is enough.
For generating netlink message we depend on the presence bits
so no selector passing needed there.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kory is reporting build issues after recent additions to YNL
if the system headers are old.
Link: https://lore.kernel.org/20250519164949.597d6e92@kmaincent-XPS-13-7390
Reported-by: Kory Maincent <kory.maincent@bootlin.com>
Fixes: 0939a418b3b0 ("tools: ynl: submsg: reverse parse / error reporting")
Tested-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250520161916.413298-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a fairly complete example of rt-link usage. If run without any
arguments it simply lists the interfaces and some of their attrs.
If run with an arg it tries to create and delete a netkit device.
1 # ./tools/net/ynl/samples/rt-link 1
2 Trying to create a Netkit interface
3 Testing error message for policy being bad:
4 Kernel error: 'Provided default xmit policy not supported' (bad attribute: .linkinfo.data(netkit).policy)
5 1: lo: mtu 65536
6 2: wlp0s1: mtu 1500
7 3: enp0s13: mtu 1500
8 4: dummy0: mtu 1500 kind dummy altname one two
9 5: nk0: mtu 1500 kind netkit primary 0 policy forward
10 6: nk1: mtu 1500 kind netkit primary 1 policy blackhole
11 Trying to delete a Netkit interface (ifindex 6)
Sample creates the device first, it sets an invalid value for a netkit
attribute to trigger reverse parsing. Line 4 shows the error with the
attribute path correctly generated by YNL.
Then sample fixes the bad attribute and re-issues the request, with
NLM_F_ECHO set. This flag causes the notification to be looped back
to the initiating socket (our socket). Sample parses this notification
to save the ifindex of the created netkit.
Sample then proceeds to list the devices. Line 8 above shows a dummy
device with two alt names. Lines 9 and 10 show the netkit devices
the sample itself created.
The "primary" and "policy" attrs are from inside the netkit submsg.
The string values are auto-generated for the enums by YNL.
To clean up sample deletes the interface it created (line 11).
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switch from including Classic netlink families one by one to excluding.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reverse parsing lets YNL convert bad and missing attr pointers
from extack into a string like "missing attribute nest1.nest2.attr_name".
It's a feature that's unique to YNL C AFAIU (even the Python YNL
can't do nested reverse parsing). Add support for reverse-parsing
of sub-messages.
To simplify the logic and the code annotate the type policies
with extra metadata. Mark the selectors and the messages with
the information we need. We assume that key / selector always
precedes the sub-message while parsing (and also if there are
multiple sub-messages like in rt-link they are interleaved
selector 1 ... submsg 1 ... selector 2 .. submsg 2, not
selector 1 ... selector 2 ... submsg 1 ... submsg 2).
The rt-link sample in a subsequent changes shows reverse parsing
of sub-messages in action.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust parsing and rendering appropriately to make sub-messages work.
Rendering is pretty trivial, as the submsg -> netlink conversion looks
like rendering a nest in which only one attr was set. Only trick
is that we use the enum value of the sub-message rather than the nest
as the type, and effectively skip one layer of nesting. A real double
nested struct would look like this:
[SELECTOR]
[SUBMSG]
[NEST]
[MSG1-ATTR]
A submsg "is" the nest so by skipping I mean:
[SELECTOR]
[SUBMSG]
[MSG1-ATTR]
There is no extra validation in YNL if caller has set the selector
matching the submsg type (e.g. link type = "macvlan" but the nest
attrs are set to carry "veth"). Let the kernel handle that.
Parsing side is a little more specialized as we need to render and
insert a new kind of function which switches between what to parse
based on the selector. But code isn't too complicated.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The easiest (or perhaps only sane) way to support submessages in C
is to treat them as if they were nests. Build fake attributes to
that effect in the codegen. Render the submsg as a big nest of all
possible values.
With this in place the main missing part is to hook in the switch
which selects how to parse based on the key.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hook in handling of sub-messages, for now treat them as ignored attrs.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Prepare for constructing Struct() instances which represent
sub-messages rather than nested attributes.
Restructure the code / indentation to more easily insert
a case where nested reference comes from annotation other
than the 'nested-attributes' property. Make sure we don't
construct the Struct() object from scratch in multiple
places as the constructor will soon have more arguments.
This should cause no functional change.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're about to add some code here for sub-messages.
Factor out the nest-related logic to make the code readable.
No functional change.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250515231650.1325372-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an XDR counted array has a maximum element count, xdrgen adds
a bounds check to the encoder or decoder for that type. But in cases
where the .x provides no maximum element count, such as
struct notify4 {
/* composed from notify_type4 or notify_deviceid_type4 */
bitmap4 notify_mask;
notifylist4 notify_vals;
};
struct CB_NOTIFY4args {
stateid4 cna_stateid;
nfs_fh4 cna_fh;
notify4 cna_changes<>;
};
xdrgen is supposed to omit that bounds check. Some of the Jinja2
templates handle that correctly, but a few are incorrect and leave
the bounds check in place with a maximum of zero, which causes
encoding/decoding of that type to fail unconditionally.
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
TC needs arrays of nests, but just a put for now.
Fairly straightforward addition.
Link: https://patch.msgid.link/20250513222011.844106-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc7).
Conflicts:
tools/testing/selftests/drivers/net/hw/ncdevmem.c
97c4e094a4b2 ("tests/ncdevmem: Fix double-free of queue array")
2f1a805f32ba ("selftests: ncdevmem: Implement devmem TCP TX")
https://lore.kernel.org/20250514122900.1e77d62d@canb.auug.org.au
Adjacent changes:
net/core/devmem.c
net/core/devmem.h
0afc44d8cdf6 ("net: devmem: fix kernel panic when netlink socket close after module unload")
bd61848900bf ("net: devmem: Implement TX path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit ce6cb8113c84 ("tools: ynl-gen: individually free previous
values on double set"), specifying the "multi-attr" property raises an
error unless the "nested-attributes" property is specified as well:
File "tools/net/ynl/./pyynl/ynl_gen_c.py", line 1147, in _load_nested_sets
child = self.pure_nested_structs.get(nested)
^^^^^^
UnboundLocalError: cannot access local variable 'nested' where it is not associated with a value
This appears to be a bug since there are existing specs which omit
"nested-attributes" on "multi-attr" attributes. Also, according to
Documentation/userspace-api/netlink/specs.rst, multi-attr "is the
recommended way of implementing arrays (no extra nesting)", suggesting
that nesting should even be avoided in favor of multi-attr.
Fix the indentation of the if-block introduced by the commit to avoid
the error.
Fixes: ce6cb8113c84 ("tools: ynl-gen: individually free previous values on double set")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/d6b58684b7e5bfb628f7313e6893d0097904e1d1.1746940107.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Support using a struct pointer for binary attrs. Len field is maintained
because the structs may grow with newer kernel versions. Or, which matters
more, be shorter if the binary is built against newer uAPI than kernel
against which it's executed. Since we are storing a pointer to a struct
type - always allocate at least the amount of memory needed by the struct
per current uAPI headers (unused mem is zeroed). Technically users should
check the length field but per modern ASAN checks storing a short object
under a pointer seems like a bad idea.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250509154213.1747885-4-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
