| Age | Commit message (Collapse) | Author |
|---|
|
commit eda3913bb70ecebac13adccffe1e7f96e93cee02 upstream.
The perf_event_attr struct has two __u32's at the top and
they need to be swapped individually.
With this change I was able to analyze a perf.data collected in a
32-bit PPC VM on an x86 system. I tested both 32-bit and 64-bit
binaries for the Intel analysis side; both read the PPC perf.data
file correctly.
-v2:
- changed the existing perf_event__attr_swap() to swap only elements
of perf_event_attr and exported it for use in swapping the
attributes in the file header
- updated swap_ops used for processing events
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: acme@ghostprotocols.net
Cc: peterz@infradead.org
Cc: paulus@samba.org
Link: http://lkml.kernel.org/r/1310754849-12474-1-git-send-email-dsahern@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Perf uses /proc/modules to figure out where kernel modules are loaded.
With the advent of kptr_restrict, non root users get zeroes for all module
start addresses.
So check if kptr_restrict is non zero and don't generate the syntethic
PERF_RECORD_MMAP events for them.
Warn the user about it in perf record and in perf report.
In perf report the reference relocation symbol being zero means that
kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't
use it to fixup symbol addresses when using a valid kallsyms (in the buildid
cache) or vmlinux (in the vmlinux path) build-id located automatically or
specified by the user.
Provide an explanation about it in 'perf report' if kernel samples were taken,
checking if a suitable vmlinux or kallsyms was found/specified.
Restricted /proc/kallsyms don't go to the buildid cache anymore.
Example:
[acme@emilia ~]$ perf record -F 100000 sleep 1
WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check
/proc/sys/kernel/kptr_restrict.
Samples in kernel functions may not be resolved if a suitable vmlinux file is
not found in the buildid cache or in the vmlinux path.
Samples in kernel modules won't be resolved at all.
If some relocation was applied (e.g. kexec) symbols may be misresolved even
with a suitable vmlinux or kallsyms file.
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ]
[acme@emilia ~]$
[acme@emilia ~]$ perf report --stdio
Kernel address maps (/proc/{kallsyms,modules}) were restricted,
check /proc/sys/kernel/kptr_restrict before running 'perf record'.
If some relocation was applied (e.g. kexec) symbols may be misresolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. .....................
#
20.24% sleep [kernel.kallsyms] [k] page_fault
20.04% sleep [kernel.kallsyms] [k] filemap_fault
19.78% sleep [kernel.kallsyms] [k] __lru_cache_add
19.69% sleep ld-2.12.so [.] memcpy
14.71% sleep [kernel.kallsyms] [k] dput
4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers
0.73% sleep [kernel.kallsyms] [k] perf_event_comm
0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
This is because it found a suitable vmlinux (build-id checked) in
/lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long
file name).
If we remove that file from the vmlinux path:
[root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \
/lib/modules/2.6.39-rc7+/build/vmlinux.OFF
[acme@emilia ~]$ perf report --stdio
[kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562
not found, continuing without symbols
Kernel address maps (/proc/{kallsyms,modules}) were restricted, check
/proc/sys/kernel/kptr_restrict before running 'perf record'.
As no suitable kallsyms nor vmlinux was found, kernel samples can't be
resolved.
Samples in kernel modules can't be resolved as well.
# Events: 13 cycles
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. ......
#
80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a
19.69% sleep ld-2.12.so [.] memcpy
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[acme@emilia ~]$
Reported-by: Stephane Eranian <eranian@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Cc: Dave Jones <davej@redhat.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Kees Cook <kees.cook@canonical.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These APIs should belong to evlist.c as they may not be
exclusively tied to the headers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com
|
|
The a1645ce1 changeset:
"perf: 'perf kvm' tool for monitoring guest performance from host"
Added a field to struct build_id_event that broke the file format.
Since the kernel build-id is the first entry, process the table using
the old format if the well known '[kernel.kallsyms]' string for the
kernel build-id has the first 4 characters chopped off (where the pid_t
sits).
Reported-by: Han Pingtian <phan@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Cc: stable@kernel.org
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (184 commits)
perf probe: Clean up probe_point_lazy_walker() return value
tracing: Fix irqoff selftest expanding max buffer
tracing: Align 4 byte ints together in struct tracer
tracing: Export trace_set_clr_event()
tracing: Explain about unstable clock on resume with ring buffer warning
ftrace/graph: Trace function entry before updating index
ftrace: Add .ref.text as one of the safe areas to trace
tracing: Adjust conditional expression latency formatting.
tracing: Fix event alignment: skb:kfree_skb
tracing: Fix event alignment: mce:mce_record
tracing: Fix event alignment: kvm:kvm_hv_hypercall
tracing: Fix event alignment: module:module_request
tracing: Fix event alignment: ftrace:context_switch and ftrace:wakeup
tracing: Remove lock_depth from event entry
perf header: Stop using 'self'
perf session: Use evlist/evsel for managing perf.data attributes
perf top: Don't let events to eat up whole header line
perf top: Fix events overflow in top command
ring-buffer: Remove unused #include <linux/trace_irq.h>
tracing: Add an 'overwrite' trace_option.
...
|
|
Stop using this python/OOP convention, doesn't really helps. Will do
more from time to time till we get it cleaned up in all of tools/perf.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So that we can reuse things like the id to attr lookup routine
(perf_evlist__id2evsel) that uses a hash table instead of the linear
lookup done in the older perf_header_attr routines, etc.
Also to make evsels/evlist more pervasive an API, simplyfing using the
emerging perf lib.
cc: Arun Sharma <arun@sharma-home.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
kallsyms has a virtual file name [kernel.kallsyms]. Currently, it can't
be added to buildid cache successfully because the code
(build_id_cache__add_s) tries to resolve [kernel.kallsyms] to a real
absolute pathname and that fails.
Fixes it by not resolving it and just use the name [kernel.kallsyms].
So dir ~/.debug/[kernel.kallsyms] is created.
Original bug report at:
https://lkml.org/lkml/2011/3/1/524
Tested-by: Han Pingtian <phan@redhat.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1299165837-27817-1-git-send-email-ming.m.lin@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
By creating an perf_evlist out of the attributes in the perf.data file
header, so that we can use evlists and evsels when reading recorded
sessions in addition to when we record sessions.
More work is needed to allow tools to allow the user to select which
events are wanted when browsing sessions, be it just one or a subset of
them, aggregated or showed at the same time but with different
indications on the UI to allow seeing workloads thru different views at
the same time.
But the overall goal/trend is to more uniformly use evsels and evlists.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
GCC 4.6.0 in Fedora rawhide turned up some compile errors in tools/perf
due to the -Werror=unused-but-set-variable flag.
I've gone through and annotated some of the assignments that had side
effects (ie: return value from a function) with the __used annotation,
and in some cases, just removed unused code.
In a few cases, we were assigning something useful, but not using it in
later parts of the function.
kyle@dreadnought:~/src% gcc --version
gcc (GCC) 4.6.0 20110122 (Red Hat 4.6.0-0.3)
Cc: Ingo Molnar <mingo@redhat.com>
LKML-Reference: <20110124161304.GK27353@bombadil.infradead.org>
Signed-off-by: Kyle McMartin <kyle@redhat.com>
[ committer note: Fixed up the annotation fixes, as that code moved recently ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
And move the event_t methods to the perf_event__ too.
No code changes, just namespace consistency.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Killing two more perf wide global variables: nr_counters and evsel_list
as a list_head.
There are more operations that will need more fields in perf_evlist,
like the pollfd for polling all the fds in a list of evsel instances.
Use option->value to pass the evsel_list to parse_{events,filters}.
LKML-Reference: <new-submission>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Using %L[uxd] has issues in some architectures, like on ppc64. Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.
Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.
Reported-by: Denis Kirjanov <dkirjanov@kernel.org>
Tested-by: Denis Kirjanov <dkirjanov@kernel.org>
LKML-Reference: <20110120093246.GA8031@hera.kernel.org>
Cc: Denis Kirjanov <dkirjanov@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pingtian Han <phan@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/core
|
|
Merge reason: pick up latest -rc.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Not really something to be exported from session.c. Rename it to
'readn' as others did in the past.
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Out of ad-hoc code and global arrays with hard coded sizes.
This is the first step on having a library that will be first
used on regression tests in the 'perf test' tool.
[acme@felicio linux]$ size /tmp/perf.before
text data bss dec hex filename
1273776 97384 5104416 6475576 62cf38 /tmp/perf.before
[acme@felicio linux]$ size /tmp/perf.new
text data bss dec hex filename
1275422 97416 1392416 2765254 2a31c6 /tmp/perf.new
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This was broken since link(2) doesn't dereference symbolic
links. Instead 'filename' becomes a symbolic link to the same file
that 'name' refers to.
This had the bad effect to create dangling symlinks in the case that
even can't be removed with perf-buildid-cache(1).
LKML-Reference: <m38vzxxrql.fsf@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Merge reason: We want to apply a dependent patch.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
There were a few stray calloc()'s and malloc()'s which were not having
their return values checked for success.
As the calling code either already coped with failure or didn't actually
care we just return -ENOMEM at that point.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Chris Samuel <chris@csamuel.org>
LKML-Reference: <4CDDF95A.1050400@csamuel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME:
$ perf record -aT
$ perf report -D | grep PERF_RECORD_
<SNIP>
3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3
3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3
3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811)
3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3
3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853
3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find
3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3
3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so
3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso]
3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1
3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so
3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so
3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1
3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3
<SNIP>
First column is the cpu and the second the timestamp.
That way we can investigate problems in the event stream.
If the new perf binary is run on an older kernel, it will disable this feature
automatically.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
At perf_session__process_event, so that we reduce the number of lines in eache
tool sample processing routine that now receives a sample_data pointer already
parsed.
This will also be useful in the next patch, where we'll allow sample the
identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu,
timestamp) just after before every event.
Also validate callchains in perf_session__process_event, i.e. as early as
possible, and keep a counter of the number of events discarded due to invalid
callchains, warning the user about it if it happens.
There is an assumption that was kept that all events have the same sample_type,
that will be dealt with in the future, when this preexisting limitation will be
removed.
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ian Munsie <imunsie@au1.ibm.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This primarily fixes perf-report, which didn't report the correct type
of event if perf-record was called to record one event different from
'cycles':
$ perf record -e instructions true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.007 MB perf.data (~295 samples) ]
$ perf report | head -n1
# Events: 7 cycles
LPU-Reference: <m3mxor6nex.fsf@gmail.com>
Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
|
|
Collecting build-ids for long running sessions may take a long time
because it needs to traverse the whole just collected perf.data stream
of events, marking the DSOs that had hits and then looking for the
.note.gnu.build-id ELF section.
For things like the 'trace' tool that records and right away consumes
the data on systems where its unlikely that the DSOs being monitored
will change while 'trace' runs, it is desirable to remove build id
collection, so add a -B/--no-buildid option to perf record to allow such
use case.
Longer term we'll avoid all this if we, at DSO load time, in the kernel,
take advantage of this slow code path to collect the build-id and stash
it somewhere, so that we can insert it in the PERF_RECORD_MMAP event.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There are situations where there is enough information in the perf.data
to process the samples. Updating the buildid cache may add unecessary
overhead in terms of disk space and time (copying large elf images).
A persistent option to do this already exists via the perfconfig file,
simply do:
[buildid]
dir = /dev/null
This patch provides a way to suppress builid cache updates on a per-run
basis. It addds a new option, -N, to perf record. Buildids are still
generated in the perf.data file.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4c19ef89.93ecd80a.40dc.fffff8e9@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch adds the ability to specify an alternate directory to store the
buildid cache (buildids, copy of binaries). By default, it is hardcoded to
$HOME/.debug. This directory contains immutable data. The layout of the
directory is such that no conflicts in filenames are possible. A modification
in a file, yields a different buildid and thus a different location in the
subdir hierarchy.
You may want to put the buildid cache elsewhere because of disk space
limitation or simply to share the cache between users. It is also useful for
remote collect vs. local analysis of profiles.
This patch adds a new config option to the perfconfig file. Under the tag
'buildid', there is a dir option. For instance, if you have:
$ cat /etc/perfconfig
[buildid]
dir = /var/cache/perf-buildid
All buildids and binaries are be saved in the directory specified. The perf
record, buildid-list, buildid-cache, report, annotate, and archive commands
will it to pull information out.
The option can be set in the system-wide perfconfig file or in the
$HOME/.perfconfig file.
Cc: David S. Miller <davem@davemloft.net>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The changes made to support host and guest machines in a session, that
started when the 'perf kvm' tool was introduced ended up introducing a
bug where the host_machine was not having its DSOs traversed for
build-id processing.
Fix it by moving some methods to the right classes and considering the
host_machine when processing build-ids.
Reported-by: Tom Zanussi <tzanussi@gmail.com>
Reported-by: Stephane Eranian <eranian@google.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On a large machine we spend a lot of time in perf_header__find_attr when
running perf report.
If we are parsing a file without PERF_SAMPLE_ID then for each sample we call
perf_header__find_attr and loop through all counter IDs, never finding a match.
As the machine gets larger there are more per cpu counters and we spend an
awful lot of time in there.
The patch below initialises each sample id to -1ULL and checks for this in
perf_header__find_attr. We may need to do something more intelligent eventually
(eg a hash lookup from counter id to attr) but this at least fixes the most
common usage of perf report.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Eric B Munson <ebmunson@us.ibm.com>
Acked-by: Eric B Munson <ebmunson@us.ibm.com>
LKML-Reference: <20100504111915.GB14636@kryten>
Signed-off-by: Anton Blanchard <anton@samba.org>
--
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The current perf code implicitly assumes SAMPLE_RAW means tracepoints
are being used, but doesn't check for that. It happily records the
TRACE_INFO even if SAMPLE_RAW is used without tracepoints, but when the
perf data is read it won't go any further when it finds TRACE_INFO but
no tracepoints, and displays misleading errors.
This adds a check for both in perf-record, and won't record TRACE_INFO
unless both are true. This at least allows perf report -D to dump raw
events, and avoids triggering a misleading error condition in perf
trace. It doesn't actually enable the non-tracepoint raw events to be
displayed in perf trace, since perf trace currently only deals with
tracepoint events.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1272865861.7932.16.camel@tropicana>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Currently, perf 'live mode' writes build-ids at the end of the
session, which isn't actually useful for processing live mode events.
What would be better would be to have the build-ids sent before any of
the samples that reference them, which can be done by processing the
event stream and retrieving the build-ids on the first hit. Doing
that in perf-record itself, however, is off-limits.
This patch introduces perf-inject, which does the same job while
leaving perf-record untouched. Normal mode perf still records the
build-ids at the end of the session as it should, but for live mode,
perf-inject can be injected in between the record and report steps
e.g.:
perf record -o - ./hackbench 10 | perf inject -v -b | perf report -v -i -
perf-inject reads a perf-record event stream and repipes it to stdout.
At any point the processing code can inject other events into the
event stream - in this case build-ids (-b option) are read and
injected as needed into the event stream.
Build-ids are just the first user of perf-inject - potentially
anything that needs userspace processing to augment the trace stream
with additional information could make use of this facility.
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1272696080-16435-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It doesn't really make sense to record the build ids at the end of a
live mode session - live mode samples need that information during the
trace rather than at the end.
Leave event__synthesize_build_id() in place, however; we'll still be
using that to synthesize build ids in a more timely fashion in a
future patch.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1272696080-16435-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
struct kernel_info and kerninfo__ are too vague, what they really
describe are machines, virtual ones or hosts.
There are more changes to introduce helpers to shorten function calls
and to make more clear what is really being done, but I left that for
subsequent patches.
Cc: Avi Kivity <avi@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Zhang, Yanmin <yanmin_zhang@linux.intel.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Here is the patch of userspace perf tool.
Signed-off-by: Zhang Yanmin <yanmin_zhang@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Bypasses the build_id perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-9-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Bypasses the tracing_data perf header code and replaces it with
a synthesized event and processing function that accomplishes
the same thing, used when reading/writing perf data to/from a
pipe.
The tracing data is pretty large, and this patch doesn't attempt
to break it down into component events. The tracing_data event
itself doesn't actually contain the tracing data, rather it
arranges for the event processing code to skip over it after
it's read, using the skip return value added to the event
processing loop in a previous patch.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-8-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Bypasses the event type perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-7-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Bypasses the attr perf header code and replaces it with a
synthesized event and processing function that accomplishes the
same thing, used when reading/writing perf data to/from a pipe.
Making the attrs into events allows them to be streamed over a
pipe along with the rest of the header data (in later patches).
It also paves the way to allowing events to be added and removed
from perf sessions dynamically.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-6-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch makes several changes to allow the perf event stream
to be sent and received over a pipe:
- adds pipe-specific versions of the header read/write code
- adds pipe-specific version of the event processing code
- adds a range of event types to be used for header or other
pseudo events, above the range used by the kernel
- checks the return value of event handlers, which they can use
to skip over large events during event processing rather than actually
reading them into event objects.
- unifies the multiple do_read() functions and updates its
users.
Note that none of these changes affect the existing perf data
file format or processing - this code only comes into play if
perf output is sent to stdout (or is read from stdin).
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: k-keiichi@bx.jp.nec.com
Cc: acme@ghostprotocols.net
LKML-Reference: <1270184365-8281-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Setting _FILE_OFFSET_BITS and using O_LARGEFILE, lseek64, etc,
is redundant. Thanks H. Peter Anvin for pointing it out.
So, this patch removes O_LARGEFILE, lseek64, etc.
Suggested-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B6A8972.3070605@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
We want to stream events as fast as possible to perf.data, and
also in the future we want to have splice working, when no
interception will be possible.
Using build_id__mark_dso_hit_ops to create the list of DSOs that
back MMAPs we also optimize disk usage in the build-id cache by
only caching DSOs that had hits.
Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1265223128-11786-6-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Open perf data file with O_LARGEFILE flag since its size is
easily larger that 2G.
For example:
# rm -rf perf.data
# ./perf kmem record sleep 300
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 3142.147 MB perf.data
(~137282513 samples) ]
# ll -h perf.data
-rw------- 1 root root 3.1G .....
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <4B68F32A.9040203@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
For now it just has operations to examine a given file, find its
build-id and add or remove it to/from the cache.
Useful, for instance, when adding binaries sent together with a
perf.data file, so that we can add them to the cache and have
the tools find it when resolving symbols.
It'll also manage the size of the cache like 'ccache' does.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1264008525-29025-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
So that when we don't have a vmlinux handy we can store the
kallsyms for later use by 'perf report'.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263501006-14185-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
There are still some problems related to loading vmlinux files,
but those are unrelated to the feature implemented in this
patch, so will get fixed in the next patches, but here are some
results:
1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit
userland
2. transfer it to a Debian Testing machine, PARISC64, 32-bit
userland
acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5
74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms]
55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko
41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko
90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko
984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko
acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5
22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0
353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0
d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0
a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf
d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0
acme@parisc:~/git/linux-2.6-tip$
acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm
The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms...
^^^^ The problem related to vmlinux handling, it shouldn't be trying this
^^^^ rather alien /proc/kallsyms at all...
/lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols
/lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols
/home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols
/usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols
Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols
Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols
<SNIP more complaints about not finding the right build-ids,
those will have to wait for 'perf archive' or plain
copying what was collected by 'perf record' on the x86_64,
source machine, see further below for an example of this >
# Samples: 293085637
#
# Overhead Command
# ........ ...............
#
61.70% find
23.50% perf
5.86% swapper
3.12% sshd
2.39% init
0.87% bash
0.86% sleep
0.59% dbus-daemon
0.25% hald
0.24% NetworkManager
0.19% hald-addon-rfki
0.15% openvpn
0.07% phy0
0.07% events/0
0.05% iwl3945
0.05% events/1
0.03% kondemand/0
acme@parisc:~/git/linux-2.6-tip$
Which matches what we get when running the same command for the
same perf.data file on the F12, x86_64, source machine:
[root@doppio linux-2.6-tip]# perf report --sort comm
# Samples: 293085637
#
# Overhead Command
# ........ ...............
#
61.70% find
23.50% perf
5.86% swapper
3.12% sshd
2.39% init
0.87% bash
0.86% sleep
0.59% dbus-daemon
0.25% hald
0.24% NetworkManager
0.19% hald-addon-rfki
0.15% openvpn
0.07% phy0
0.07% events/0
0.05% iwl3945
0.05% events/1
0.03% kondemand/0
[root@doppio linux-2.6-tip]#
The other modes work as well, modulo the problem with vmlinux:
acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15
# Samples: 293085637
#
# Overhead Command Shared Object
# ........ ............... .................................
#
35.11% find ffffffff81002b5a
18.25% perf ffffffff8102235f
16.17% find libc-2.10.2.so
9.07% find find
5.80% swapper ffffffff8102235f
3.95% perf libc-2.10.2.so
2.33% init ffffffff810091b9
1.65% sshd libcrypto.so.0.9.8k
1.35% find [e1000e]
0.68% sleep libc-2.10.2.so
acme@parisc:~/git/linux-2.6-tip$
And the lack of the right buildids:
acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15
# Samples: 293085637
#
# Overhead Command Shared Object Symbol
# ........ ............... ................................. ......
#
35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a
18.25% perf ffffffff8102235f [k] 0xffffffff8102235f
16.17% find libc-2.10.2.so [.] 0x00000000045782
9.07% find find [.] 0x0000000000fb0e
5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f
3.95% perf libc-2.10.2.so [.] 0x0000000007f398
2.33% init ffffffff810091b9 [k] 0xffffffff810091b9
1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440
1.35% find [e1000e] [k] 0x00000000010948
0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b
acme@parisc:~/git/linux-2.6-tip$
But if we:
acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug
ls: cannot access /home/acme/.debug: No such file or directory
acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/
acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/
acme@doppio's password:
eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02
acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb
acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1
acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null
# dso: libc-2.10.2.so
# Samples: 64281170
#
# Overhead Command Symbol
# ........ ............... ......
#
14.98% perf [.] __GI_strcmp
12.30% find [.] __GI_memmove
9.25% find [.] _int_malloc
7.60% find [.] _IO_vfprintf_internal
6.10% find [.] _IO_new_file_xsputn
6.02% find [.] __GI_close
3.08% find [.] _IO_file_overflow_internal
3.08% find [.] malloc_consolidate
3.08% find [.] _int_free
3.08% find [.] __strchrnul
3.08% find [.] __getdents64
3.08% find [.] __write_nocancel
3.08% sleep [.] __GI__dl_addr
3.08% sshd [.] __libc_select
3.08% find [.] _IO_new_file_write
3.07% find [.] _IO_new_do_write
3.06% find [.] __GI___errno_location
3.05% find [.] __GI___libc_malloc
3.04% perf [.] __GI_memcpy
1.71% find [.] __fprintf_chk
1.29% bash [.] __gconv_transform_utf8_internal
0.79% dbus-daemon [.] __GI_strlen
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
acme@parisc:~/git/linux-2.6-tip$
Which matches what we get on the source, F12, x86_64 machine:
[root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so
# dso: libc-2.10.2.so
# Samples: 64281170
#
# Overhead Command Symbol
# ........ ............... ......
#
14.98% perf [.] __GI_strcmp
12.30% find [.] __GI_memmove
9.25% find [.] _int_malloc
7.60% find [.] _IO_vfprintf_internal
6.10% find [.] _IO_new_file_xsputn
6.02% find [.] __GI_close
3.08% find [.] _IO_file_overflow_internal
3.08% find [.] malloc_consolidate
3.08% find [.] _int_free
3.08% find [.] __strchrnul
3.08% find [.] __getdents64
3.08% find [.] __write_nocancel
3.08% sleep [.] __GI__dl_addr
3.08% sshd [.] __libc_select
3.08% find [.] _IO_new_file_write
3.07% find [.] _IO_new_do_write
3.06% find [.] __GI___errno_location
3.05% find [.] __GI___libc_malloc
3.04% perf [.] __GI_memcpy
1.71% find [.] __fprintf_chk
1.29% bash [.] __gconv_transform_utf8_internal
0.79% dbus-daemon [.] __GI_strlen
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[root@doppio linux-2.6-tip]#
So I think this is really, really nice in that it demonstrates
the portability of perf.data files and the use of build-ids
accross such aliens worlds :-)
There are some things to fix tho, like the bitmap on the header,
but things are looking good.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
So that we can restore them to the right DSO list (either
dsos__kernel or dsos__user).
We do that just like the kernel does for the other events,
encoding PERF_RECORD_MISC_{KERNEL,USER} in perf_event_header.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262901583-8074-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Will be used by other options where padding is needed.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262629169-22797-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Just propagate eventual errors.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262047716-23171-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Propagate the errors instead, its callers already propagate
other errors.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1262047716-23171-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Now a cache will be created in a ~/.debug debuginfo like
hierarchy, so that at the end of a 'perf record' session all the
binaries (with build-ids) involved get collected and indexed by
their build-ids, so that perf report can find them.
This is interesting when developing software where you want to
do a 'perf diff' with the previous build and opens avenues for
lots more interesting tools, like a 'perf diff --graph' that
takes more than two binaries into account.
Tunables for collecting just the symtabs can be added if one
doesn't want to have the full binary, but having the full binary
allows things like 'perf rerecord' or other tools that can
re-run the tests by having access to the exact binary in some
perf.data file, so it may well be interesting to keep the full
binary there.
Space consumption is minimised by trying to use hard links, a
'perf cache' tool to manage the space used, a la ccache is
required to purge older entries.
With this in place it will be possible also to introduce new
commands, 'perf archive' and 'perf restore' (or some more
suitable and future proof names) to create a cpio/tar file with
the perf data and the files in the cache that _had_ perf hits of
interest.
There are more aspects to polish, like finding the right vmlinux
file to cache, etc, but this is enough for a first step.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261957026-15580-10-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Pass the event_ops to perf_session__process_events instead.
Also move the event_ops definition to session.h, starting to
move things around to their right place, trimming the many
unneeded headers we have.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1260741029-4430-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
