summaryrefslogtreecommitdiff
path: root/tools/perf/util
AgeCommit message (Collapse)Author
2009-09-24perf tools: Dont use openat()Eric Dumazet
openat() is still a young glibc facility, better to not use it in a non performance critical program (perf list) Many machines have older glibc (RHEL 4 Update 5 -> glibc-2.3.4-2.36 on my dev machine for example). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ulrich Drepper <drepper@redhat.com> LKML-Reference: <4ABB767D.6080004@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-24perf tools: Fix buffer allocationEric Dumazet
"perf top" cores dump on my dev machine, if run from a directory where vmlinux is present: *** glibc detected *** malloc(): memory corruption: 0x085670d0 *** Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: <stable@kernel.org> LKML-Reference: <4ABB6EB7.7000002@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-24perf tools: Handle relative paths while loading module symbolsMike Galbraith
Inform util/module.c::mod_dso__load_module_paths() that relative paths do exist in some modules.dep, and make it fail noisily should it encounter a path that it doesn't understand, or a module it cannot open. Reported-by: Avi Kivity <avi@redhat.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: rostedt@goodmis.org Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <1253779628.10513.8.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-23perf tools: Fix module symbol loading bugMike Galbraith
Avi Kivity reported 'perf annotate' failures with modules, the requested function was not annotated. If there are no modules currently loaded, or the last module scanned is not loaded, dso__load_modules() steps on the value from dso__load_vmlinux(), so we happily load the kallsyms symbols on top of what we've already loaded. Fix that such that the total count of symbols loaded is returned. Should module symbol load fail after parsing of vmlinux, is's a hard failure, so do not silently fall-back to kallsyms. Reported-by: Avi Kivity <avi@redhat.com> Signed-off-by: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: rostedt@goodmis.org Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> LKML-Reference: <1253697658.11461.36.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21perf: Do the big rename: Performance Counters -> Performance EventsIngo Molnar
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20perf util: SVG performance improvementsArjan van de Ven
Tweak the output SVG to increase performance in SVG viewers by limiting the different types of font sizes and by smarter transformations on the text. At least with Inkscape this gives a notable performance improvement during zoom and scrolling. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090920181438.3a49cb93@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20perf util: Make the timechart SVG width dynamicArjan van de Ven
This patch adds a command line option for timechart that allows the user to specify the width of the SVG file. This patch also makes sure that each second of recording has at least 200 units (pixels at 96 DPI) of width. This impacts recordings longer than 5 seconds; recordings shorter than 5 second will scale up to have a width of 1000 units for the whole recording (as before). Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090920181416.69570c5d@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20perf timechart: Show the duration of scheduler delays in the SVGArjan van de Ven
Given that scheduler latencies are the hot thing nowadays, show the duration of said latencies in the SVG in text form. In addition, if the latency is more than 10 msec, pick a brighter yellow color as a way to point these long delays out. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090920181353.796f4509@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-20perf timechart: Show the name of the waker/wakee in timechartArjan van de Ven
Timechart currently shows thin green lines for sending or receiving wakeups. This patch also prints (in a very small font) the name of the process that is being woken/wakes up this process. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090920181328.68baa978@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19perf utils: Use a define for the maximum length of a trace eventArjan van de Ven
As per Ingo's review: use a #define rather than an open coded constant for the maximum length of a trace event for storing in the perf.data file. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090919133630.10533d3e@infradead.org> [ add a few comments to nearby functions ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19perf utils: Be consistent about minimum text size in the svghelperArjan van de Ven
Be more consistent in the svghelper about the minimum text size by having a global #define for this. There needs to be a minimum text size in order to keep the size of the SVG file within the reach of what current SVG viewers can cope with. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Cc: Paul Mackerras <paulus@samba.org> Cc: Arjan van de Ven <arjan@infradead.org> LKML-Reference: <20090919133507.7374ef8b@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19perf: Add a SVG helper library fileArjan van de Ven
The timechart tool writes out SVG format output; this patch adds a set of helper functions to abstract dealing with SVG from the core timechart code. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090912130613.677f0516@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19perf: Add a sample_event type to the event_unionArjan van de Ven
Add a sample_event type to the event_union so that raw samples can be processed easily. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090912130511.411434b5@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19perf: Allow perf utilities to have "callback" options without argumentsArjan van de Ven
timechart needs to add a "callback" type command line argument that does not take arguments. This patch adds the parse-options.h infrastructure to make this possible. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090912130440.548666c1@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19perf: Store trace event name/id pairs in perf.dataArjan van de Ven
The trace event name<->id mapping is dynamic for each kernel compile. In order for perf.data to be useable outside the actual system, we thus need to store a table of this mapping for later use. This patch adds this table to perf.data, and provides helper functions for lookup up fields from this table. To avoid mistakes, lookup-from-table is kept completely seprate from lookup-from-local-debugfs. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090912130405.6960d099@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-19perf: Add a timestamp to fork eventsArjan van de Ven
perf timechart needs to know when a process forked, in order to be able to visualize properly when tasks start. This patch adds a time field to the event structure, and fills it in appropriately. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090912130341.51ad2de2@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18perf trace: Sample timestamp and cpu when using record flagLi Zefan
Sample timestamp and cpu just like the -R option. Before: init-0 [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=18 handler=eth0 init-0 [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=18 handler=eth0 init-0 [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=1 handler=i8042 init-0 [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=18 handler=eth0 init-0 [-01] 1266874889.17179869184709551615: irq_handler_entry: irq=1 handler=i8042 After: init-0 [001] 7364.568965353: irq_handler_entry: irq=18 handler=eth0 init-0 [001] 7365.530226877: irq_handler_entry: irq=1 handler=i8042 init-0 [001] 7365.542831563: irq_handler_entry: irq=18 handler=eth0 init-0 [001] 7365.644156299: irq_handler_entry: irq=18 handler=eth0 init-0 [001] 7365.694556201: irq_handler_entry: irq=18 handler=eth0 Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4AB1F827.8040905@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18perf tools: Increase MAX_EVENT_LENGTHLi Zefan
The name length of some trace events is longer than 30, like sys_enter_sched_get_priority_max and ext4_mb_discard_preallocations. Passing those events to perf-record will fail, try: # ./perf record -f -e syscalls:sys_enter_sched_get_priority_max -F 1 -a Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4AB1F4AB.7050205@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-18perf tools: Fix memory leak in read_ftrace_printk()Li Zefan
get_tracing_file() should be paired with put_tracing_file(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4AB1F48F.4070807@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16perf sched: Add 'perf sched map' scheduling event map printoutIngo Molnar
This prints a textual context-switching outline of workload captured via perf sched record. For example, on a 16 CPU box it outputs: N1 O1 . . . S1 . . . B0 . *I0 C1 . M1 . 23002.773423 secs N1 O1 . *Q0 . S1 . . . B0 . I0 C1 . M1 . 23002.773423 secs N1 O1 . Q0 . S1 . . . B0 . *R1 C1 . M1 . 23002.773485 secs N1 O1 . Q0 . S1 . *S0 . B0 . R1 C1 . M1 . 23002.773478 secs *L0 O1 . Q0 . S1 . S0 . B0 . R1 C1 . M1 . 23002.773523 secs L0 O1 . *. . S1 . S0 . B0 . R1 C1 . M1 . 23002.773531 secs L0 O1 . . . S1 . S0 . B0 . R1 C1 *T1 M1 . 23002.773547 secs T1 => irqbalance:2089 L0 O1 . . . S1 . S0 . *P0 . R1 C1 T1 M1 . 23002.773549 secs *N1 O1 . . . S1 . S0 . P0 . R1 C1 T1 M1 . 23002.773566 secs N1 O1 . . . *J0 . S0 . P0 . R1 C1 T1 M1 . 23002.773571 secs N1 O1 . . . J0 . S0 *B0 P0 . R1 C1 T1 M1 . 23002.773592 secs N1 O1 . . . J0 . *U0 B0 P0 . R1 C1 T1 M1 . 23002.773582 secs N1 O1 . . . *S1 . U0 B0 P0 . R1 C1 T1 M1 . 23002.773604 secs N1 O1 . . . S1 . U0 B0 *. . R1 C1 T1 M1 . 23002.773615 secs N1 O1 . . . S1 . U0 B0 . . *K0 C1 T1 M1 . 23002.773631 secs N1 O1 . *M0 . S1 . U0 B0 . . K0 C1 T1 M1 . 23002.773624 secs N1 O1 . M0 . S1 . U0 *. . . K0 C1 T1 M1 . 23002.773644 secs N1 O1 . M0 . S1 . U0 . . . *R1 C1 T1 M1 . 23002.773662 secs N1 O1 . M0 . S1 . *. . . . R1 C1 T1 M1 . 23002.773648 secs N1 O1 . *. . S1 . . . . . R1 C1 T1 M1 . 23002.773680 secs N1 O1 . . . *L0 . . . . . R1 C1 T1 M1 . 23002.773717 secs *N0 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773709 secs *N1 O1 . . . L0 . . . . . R1 C1 T1 M1 . 23002.773747 secs Columns stand for individual CPUs, from CPU0 to CPU15, and the two-letter shortcuts stand for tasks that are running on a CPU. '*' denotes the CPU that had the event. A dot signals an idle CPU. New tasks are assigned new two-letter shortcuts - when they occur first they are printed. In the above example 'T1' stood for irqbalance: T1 => irqbalance:2089 Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16perf sched: Make idle thread and comm/pid names more consistentIngo Molnar
Peter noticed that we have 3 ways of referring to the idle thread: [idle]:0 swapper:0 swapper-0 Standardize on 'swapper:0'. Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-16perf sched: Account for lost events, increase default bufferingIngo Molnar
Output such lost event and state machine weirdness stats: TOTAL: | 14974.910 ms | 46384 | --------------------------------------------------- INFO: 8.865% lost events (19132 out of 215819, in 8 chunks) INFO: 0.198% state machine bugs (49 out of 24708) (due to lost events?) And increase buffering to -m 1024 (4 MB) by default. Since we use output multiplexing that kind of space is needed. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-14perf tools: Implement counter output multiplexingIngo Molnar
Finish the -M/--multiplex option implementation: - separate it out from group_fd - correctly set it via the ioctl and dont mmap counters that are multiplexed - modify the perf record event loop to deal with buffer-less counters. - remove the -g option from perf sched record - account for unordered events in perf sched latency - (add -f to perf sched record to ease measurements) - skip idle threads (pid==0) in latency output The result is better latency output by 'perf sched latency': ----------------------------------------------------------------------------------- Task | Runtime ms | Switches | Average delay ms | Maximum delay ms | ----------------------------------------------------------------------------------- ksoftirqd/8 | 0.071 ms | 2 | avg: 0.458 ms | max: 0.913 ms | at-spi-registry | 0.609 ms | 19 | avg: 0.013 ms | max: 0.023 ms | perf | 3.316 ms | 16 | avg: 0.013 ms | max: 0.054 ms | Xorg | 0.392 ms | 19 | avg: 0.011 ms | max: 0.018 ms | sleep | 0.537 ms | 2 | avg: 0.009 ms | max: 0.009 ms | ----------------------------------------------------------------------------------- TOTAL: | 4.925 ms | 58 | --------------------------------------------- Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13perf sched: Implement the 'perf sched record' subcommandIngo Molnar
Implement the 'perf sched record' subcommand that adds a default list of events, turns on raw sampling and system-wide tracing and passes off the rest of the command to perf record. This is more convenient than having to specify the events all the time. Before: $ perf record -a -R -e sched:sched_switch:r -e sched:sched_stat_wait:r -e sched:sched_stat_sleep:r -e sched:sched_stat_iowait:r -e sched:sched_process_exit:r -e sched:sched_process_fork:r -e sched:sched_wakeup:r -e sched:sched_migrate_task:r -c 1 sleep 1 After: $ perf sched record -f sleep 1 Also fix an assumption in the event string parser that assumed that strings passed in can be modified. (In this case they wont be as they come from a readonly constant section.) Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13perf sched: Clean up PID sorting logicIngo Molnar
Use a sort list for thread atoms insertion as well - instead of hardcoded for PID. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13perf sched: Display time in milliseconds, reorganize outputIngo Molnar
After: ----------------------------------------------------------------------------------- Task | runtime ms | switches | average delay ms | maximum delay ms | ----------------------------------------------------------------------------------- migration/0 | 0.000 ms | 1 | avg: 0.047 ms | max: 0.047 ms | ksoftirqd/0 | 0.000 ms | 1 | avg: 0.039 ms | max: 0.039 ms | migration/1 | 0.000 ms | 3 | avg: 0.013 ms | max: 0.016 ms | migration/3 | 0.000 ms | 2 | avg: 0.003 ms | max: 0.004 ms | migration/4 | 0.000 ms | 1 | avg: 0.022 ms | max: 0.022 ms | distccd | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | distccd | 0.000 ms | 1 | avg: 0.014 ms | max: 0.014 ms | distccd | 0.000 ms | 2 | avg: 0.000 ms | max: 0.000 ms | distccd | 0.000 ms | 2 | avg: 0.012 ms | max: 0.019 ms | distccd | 0.000 ms | 1 | avg: 0.002 ms | max: 0.002 ms | as | 0.000 ms | 2 | avg: 0.019 ms | max: 0.019 ms | as | 0.000 ms | 3 | avg: 0.015 ms | max: 0.017 ms | as | 0.000 ms | 1 | avg: 0.009 ms | max: 0.009 ms | perf | 0.000 ms | 1 | avg: 0.001 ms | max: 0.001 ms | gcc | 0.000 ms | 1 | avg: 0.021 ms | max: 0.021 ms | run-mozilla.sh | 0.000 ms | 2 | avg: 0.010 ms | max: 0.017 ms | mozilla-plugin- | 0.000 ms | 1 | avg: 0.006 ms | max: 0.006 ms | gcc | 0.000 ms | 2 | avg: 0.013 ms | max: 0.013 ms | ----------------------------------------------------------------------------------- (The runtime ms column is not filled in yet.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13perf sched: Fix bad event alignmentFrederic Weisbecker
perf sched raises the following error when it meets a sched switch event: perf: builtin-sched.c:286: register_pid: Assertion `!(pid >= 65536)' failed. Abandon Currently in x86-64, the sched switch events have a hole in the middle of the structure: u16 common_type; u8 common_flags; u8 common_preempt_count; u32 common_pid; u32 common_tgid; char prev_comm[16]; u32 prev_pid; u32 prev_prio; <--- there u64 prev_state; char next_comm[16]; u32 next_pid; u32 next_prio; Gcc inserts a 4 bytes hole there for prev_state to be u64 aligned. And the events are exported to userspace with this hole. But in userspace, from perf sched, we fetch it using a structure that has a new field in the beginning: u32 size. This is because our trace is exported with its size as a field. But now that we have this new field, the hole in the middle disappears because it makes prev_state becoming well aligned. And since we are using a pointer to the raw trace using this struct, instead of reading prev_state, we are reading the hole. We could fix it by keeping the size seperate from the struct but actually there a lot of other potential problems: some fields may be saved as long in a 64 bits system and later read as long in a 32 bits system. Also this direct cast doesn't care about the endianness differences between the host traced machine and the machine in which we do the post processing. So instead of using such dangerous direct casts, fetch the values using the trace parsing API that already takes care of all these problems. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13perf tools: Allow the specification of all tracepoints at onceFrederic Weisbecker
Currently, when one wants to activate every tracepoint counters of a subsystem from perf record, the current sequence is needed: perf record -e subsys:ev1 -e subsys:ev2 -e subsys:ev3 This may annoy the most patient of us. Now we can just do: perf record -e subsys:* Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-13perf sched: Import schedbench.cIngo Molnar
Import the schedbench.c tool that i wrote some time ago to simulate scheduler behavior but never finished. It's a good basis for perf sched nevertheless. Most of its guts are not hooked up to the perf event loop yet - that will be done in the patches to come. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-11Merge branch 'tracing-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (105 commits) ring-buffer: only enable ring_buffer_swap_cpu when needed ring-buffer: check for swapped buffers in start of committing tracing: report error in trace if we fail to swap latency buffer tracing: add trace_array_printk for internal tracers to use tracing: pass around ring buffer instead of tracer tracing: make tracing_reset safe for external use tracing: use timestamp to determine start of latency traces tracing: Remove mentioning of legacy latency_trace file from documentation tracing/filters: Defer pred allocation, fix memory leak tracing: remove users of tracing_reset tracing: disable buffers and synchronize_sched before resetting tracing: disable update max tracer while reading trace tracing: print out start and stop in latency traces ring-buffer: disable all cpu buffers when one finds a problem ring-buffer: do not count discarded events ring-buffer: remove ring_buffer_event_discard ring-buffer: fix ring_buffer_read crossing pages ring-buffer: remove unnecessary cpu_relax ring-buffer: do not swap buffers during a commit ring-buffer: do not reset while in a commit ...
2009-09-06Merge commit 'v2.6.31-rc9' into tracing/coreIngo Molnar
Merge reason: move from -rc5 to -rc9. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-04perf tools: Avoid unnecessary work in directory lookupsUlrich Drepper
This patch improves some (common) inefficiencies in the handling of directory lookups: - not using the d_type information returned by the kernel - constructing (absolute) paths for file operation even though directory-relative operations using the *at functions is possible There are more places to fix but this is a start. Signed-off-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <20090904193951.GB6186@ghostprotocols.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-03perf trace: Fix read_string()Ingo Molnar
We did not account for the enclosing \0. Depending on what malloc() gave us this resulted in corrupted version string printouts. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-03perf trace: Print out in nanosecondsIngo Molnar
Print out more accurate timestamps - usecs does not cut it anymore on fast enough boxes ;-) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-03perf tools: Seek to the end of the header areaIngo Molnar
Leave the input fd at the data area. It does not matter right now - but seeking at the end of it certainly did not make sense. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-02perf tools: Work around strict aliasing related warningsIngo Molnar
Older versions of GCC are rather stupid about strict aliasing: util/trace-event-parse.c: In function 'parse_cmdlines': util/trace-event-parse.c:93: warning: dereferencing type-punned pointer will break strict-aliasing rules util/trace-event-parse.c: In function 'parse_proc_kallsyms': util/trace-event-parse.c:155: warning: dereferencing type-punned pointer will break strict-aliasing rules util/trace-event-parse.c:157: warning: dereferencing type-punned pointer will break strict-aliasing rules util/trace-event-parse.c:158: warning: dereferencing type-punned pointer will break strict-aliasing rules util/trace-event-parse.c: In function 'parse_ftrace_printk': util/trace-event-parse.c:294: warning: dereferencing type-punned pointer will break strict-aliasing rules util/trace-event-parse.c:295: warning: dereferencing type-punned pointer will break strict-aliasing rules make: *** [util/trace-event-parse.o] Error 1 Make it clear to GCC that we intend with those pointers, by passing them through via an explicit (void *) cast. We might want to add -fno-strict-aliasing as well, like the kernel itself does. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31perf tools: Complete support for dynamic stringsFrederic Weisbecker
Complete support for __str_loc type strings of ftrace events which have dynamic offsets values set for each of them inside their sammples. Before: geany-5759 [000] 0.000000: lock_release: name geany-5759 [000] 0.000000: lock_release: name geany-5759 [000] 0.000000: lock_release: name kondemand/0-362 [000] 0.000000: lock_release: name pdflush-421 [000] 0.000000: lock_release: name After: geany-5759 [000] 0.000000: lock_release: &u->lock geany-5759 [000] 0.000000: lock_release: key geany-5759 [000] 0.000000: lock_release: &group->notification_mutex kondemand/0-362 [000] 0.000000: lock_release: &rq->lock pdflush-421 [000] 0.000000: lock_release: &rq->lock Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1251693921-6579-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2009-08-31perf tools: Unify swapper tasks namingFrederic Weisbecker
In perf tools, we hardcode the pid 0 cmdline resolving to "idle" because the init task is not included in the COMM events. But the idle tasks secondary cpus are resolved into their "init" name through the COMM events. We have then such strange result in perf report (ditto with trace): 19.66% init [kernel] [k] acpi_idle_enter_c1 17.32% [idle] [kernel] [k] acpi_idle_enter_c1 It's then better to unify the swapper tasks into a single init name. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1251693921-6579-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
2009-08-31perf tools: Librarize idle thread registrationFrederic Weisbecker
Librarize register_idle_thread() used by annotate and report. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1251693921-6579-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31Merge branch 'perfcounters/tracing' into perfcounters/coreIngo Molnar
Merge reason: this topic is ready now to merge into the main development branch for .32, with functional perf trace output. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28perf tools: Fix missing string field printing in perf traceFrederic Weisbecker
Some string fields are not printed because of a missing printf in the post-processing. Before: perf-10070 [000] 0.000000: sched_switch: task :10070 [120] (R) ==> :5720 [120] geany-5720 [000] 0.000000: sched_switch: task :5720 [120] (S) ==> :10070 [120] perf-10070 [000] 0.000000: sched_switch: task :10070 [120] (R) ==> :5720 [120] geany-5720 [000] 0.000000: sched_switch: task :5720 [120] (S) ==> :10070 [120] <idle>-0 [000] 0.000000: sched_switch: task :0 [140] (R) ==> :361 [115] After: perf-10070 [000] 0.000000: sched_switch: task perf:10070 [120] (R) ==> geany:5720 [120] geany-5720 [000] 0.000000: sched_switch: task geany:5720 [120] (S) ==> perf:10070 [120] perf-10070 [000] 0.000000: sched_switch: task perf:10070 [120] (R) ==> geany:5720 [120] geany-5720 [000] 0.000000: sched_switch: task geany:5720 [120] (S) ==> perf:10070 [120] <idle>-0 [000] 0.000000: sched_switch: task swapper:0 [140] (R) ==> kondemand/1:361 [115] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1251427567-10551-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28perf tools: Only save the event formats we needFrederic Weisbecker
While opening a trace event counter, every events are saved in the trace.info file. But we only want to save the specifications of the events we are using. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1251421798-9101-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf tools: Save partial non-overlapping mapFrederic Weisbecker
The librarization of the thread helpers between annotate and report lost some perf report specifics. thread__insert_map() had its most uptodate version in perf report which cared about partial map overlapping. In case of overlap between two maps, perf annotate's version removes the whole old map without considering if it partially or absolutely overlaps the new map. We exported the odd version, change it by using the perf report version. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250607843-7395-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf tools: Remove obsolete definesIngo Molnar
The _XOPEN_SOURCE* defines are not really needed on Linux and it's not like we'll port this to AIX ;-) The define also broke the build with gcc 4.4.1: CC util/trace-event-parse.o In file included from util/trace-event-parse.c:32: util/util.h:43:1: error: "_XOPEN_SOURCE" redefined So remove them. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-18perf tools: Make trace event format parser aware of cast to pointersFrederic Weisbecker
The ftrace event format parser handles the usual casts but not the cast to pointers. Such casts have been introduced recently with the module trace events and raise the following parsing error: Fatal: bad op token ) This is because it considers the "*" character as a binary operator. Make it then aware of casts to pointers. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> LKML-Reference: <1250543271-8383-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17perf tools: Add perf traceFrederic Weisbecker
This adds perf trace into the set of perf tools. It is written to fetch the tracepoint samples from perf events and display them, according to the events information given by the debugfs files through the util/trace* tools. It is a rough first shot and doesn't yet handle the cpu, timestamps fields and some other things. Example: perf record -f -e workqueue:workqueue_execution:record -F 1 -a perf trace kblockd/0-236 [000] 0.000000: workqueue_execution: thread=:236 func=cfq_kick_queue+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/0-360 [000] 0.000000: workqueue_execution: thread=:360 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 kondemand/1-361 [000] 0.000000: workqueue_execution: thread=:361 func=do_dbs_timer+0x0 Todo: - A lot of things! Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17perf tools: Add trace event information parserSteven Rostedt
Add util/trace-event-parse.c which provides the handlers to parse the ftrace events info from the stream and handles the ftrace perf samples event printing. This file is a rename of the parse-events.c file from the trace-cmd tools, written by Steven Rostedt and Josh Triplett, originated from the git tree: git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This is a perf tools integration. [ fweisbec@gmail.com: various changes for perf tools integration. ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17perf tools: Add trace event debugfs stream readerSteven Rostedt
Add util/trace-event-read.c which handles trace events informations reading. This file is a rename of the trace-read.c file from the trace-cmd tools, written by Steven Rostedt and Josh Triplett, originated from the git tree: git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This is its perf tools integration. [ fweisbec@gmail.com: various changes for perf tools integration. ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-17perf tools: Add trace event debugfs IO handlerSteven Rostedt
Add util/trace-event-info.c which handles ftrace file IO from debugfs and provides general helpers to fetch/save ftrace events informations. This file is a rename of the trace-cmd.c file from the trace-cmd tools, written by Steven Rostedt and Josh Triplett, originated from the git tree: git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git This is a perf tools integration. For now, ftrace events information is saved in a separate file than the standard perf.data [fweisbec@gmail.com: various changes for perf tools integration] Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Clark Williams <williams@redhat.com> Cc: Jon Masters <jonathan@jonmasters.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Christoph Hellwig <hch@infradead.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Zhaolei <zhaolei@cn.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Anton Blanchard <anton@samba.org> LKML-Reference: <1250518688-7207-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-16perf tools: Librarize trace_event() helperFrederic Weisbecker
Librarize trace_event() helper so that perf trace can use it too. Also clean up the debug.h includes a bit. It's not good to have it included in perf.h because it doesn't make it flexible against other headers it may need (headers that can also depend on perf.h and then create a recursive header dependency). Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1250453149-664-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>