| Age | Commit message (Collapse) | Author |
|---|
|
Netdevsim emulates firmware update and it takes 5 seconds to complete.
For some use cases, this is too long and unnecessary. Allow user to
configure the time by exposing debugfs a knob to set chunk time.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250722091945.79506-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The devlink_nl_rate_tc_bw_parse function uses a large stack array for
devlink attributes, which triggers a warning about excessive stack
usage:
net/devlink/rate.c: In function 'devlink_nl_rate_tc_bw_parse':
net/devlink/rate.c:382:1: error: the frame size of 1648 bytes is larger than 1536 bytes [-Werror=frame-larger-than=]
Introduce a separate attribute set specifically for rate TC bandwidth
parsing that only contains the two attributes actually used: index
and bandwidth. This reduces the stack array from DEVLINK_ATTR_MAX
entries to just 2 entries, solving the stack usage issue.
Update devlink selftest to use the new 'index' and 'bw' attribute names
consistent with the YAML spec.
Example usage with ynl with the new spec:
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-set --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1,
"rate-tc-bws": [
{"index": 0, "bw": 50},
{"index": 1, "bw": 50},
{"index": 2, "bw": 0},
{"index": 3, "bw": 0},
{"index": 4, "bw": 0},
{"index": 5, "bw": 0},
{"index": 6, "bw": 0},
{"index": 7, "bw": 0}
]
}'
./tools/net/ynl/cli.py --spec Documentation/netlink/specs/devlink.yaml \
--do rate-get --json '{
"bus-name": "pci",
"dev-name": "0000:08:00.0",
"port-index": 1
}'
output for rate-get:
{'bus-name': 'pci',
'dev-name': '0000:08:00.0',
'port-index': 1,
'rate-tc-bws': [{'bw': 50, 'index': 0},
{'bw': 50, 'index': 1},
{'bw': 0, 'index': 2},
{'bw': 0, 'index': 3},
{'bw': 0, 'index': 4},
{'bw': 0, 'index': 5},
{'bw': 0, 'index': 6},
{'bw': 0, 'index': 7}],
'rate-tx-max': 0,
'rate-tx-priority': 0,
'rate-tx-share': 0,
'rate-tx-weight': 0,
'rate-type': 'leaf'}
Fixes: 566e8f108fc7 ("devlink: Extend devlink rate API with traffic classes bandwidth management")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/netdev/20250708160652.1810573-1-arnd@kernel.org/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507171943.W7DJcs6Y-lkp@intel.com/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Tested-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/1753175609-330621-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to validate the headroom adjustment support for both extension
and the shrinking cases. For the extension part, eat up space from
the start of payload data whereas, for the shrinking part, populate
the newly available space with a tag. In the user-space, validate that a
test string is manipulated accordingly.
The negative and positive offset values result in shrinking and growing of
headroom (growing and shrinking of payload) respectively.
TAP version 13
1..9
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: pkt_sz 512, ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Failed run: pkt_sz 512, ... offset -128. Reason: Adjustment failed
ok 8 xdp.test_xdp_native_adjst_head_grow_data
\# Failed run: pkt_sz (512) > HDS threshold (0) and offset 64 > 48
ok 9 xdp.test_xdp_native_adjst_head_shrnk_data
\# Totals: pass:9 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-6-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to validate support for the two cases of tail adjustment: 1)
tail extension, and 2) tail shrinking across different frame sizes and
offset values. For each of the two cases, test both the single and
multi-buffer cases by choosing appropriate packet size.
The negative offset value result in growing of tailroom (shrinking of
payload) while the positive offset result in shrinking of tailroom
(growing of payload).
Since the support for tail adjustment varies across drivers, classify the
test as pass if at least one combination of packet size and offset from a
pre-selected list results in a successful run. In case of an unsuccessful
run, report the failure and highlight the packet size and offset values
that caused the test to fail, as well as the values that resulted in the
last successful run.
Note: The growing part of this test for netdevsim may appear flaky when
the offset value is larger than 1. This behavior occurs because tailroom
is not explicitly reserved for netdevsim, with 1 being the typical
tailroom value. However, in certain cases, such as payload being the last
in the page with additional available space, the truesize is expanded.
This also result increases the tailroom causing the test to pass
intermittently. In contrast, when tailrrom is explicitly reserved, such
as in the of fbnic, the test results are deterministic.
./drivers/net/xdp.py
TAP version 13
1..7
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Failed run: ... successful run: ... offset 1. Reason: Adjustment failed
ok 6 xdp.test_xdp_native_adjst_tail_grow_data
ok 7 xdp.test_xdp_native_adjst_tail_shrnk_data
\# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-5-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test to verify the XDP_TX functionality by generating traffic from a
remote node on a specific UDP port and redirecting it back to the sender.
./drivers/net/xdp.py
TAP version 13
1..5
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
ok 5 xdp.test_xdp_native_tx_mb
\# Totals: pass:5 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test XDP_PASS/DROP in single buffer and multi buffer mode when
XDP native support is available.
./drivers/net/xdp.py
TAP version 13
1..4
ok 1 xdp.test_xdp_native_pass_sb
ok 2 xdp.test_xdp_native_pass_mb
ok 3 xdp.test_xdp_native_drop_sb
ok 4 xdp.test_xdp_native_drop_mb
\# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250719083059.3209169-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add test cases for creating and deleting contexts.
TAP version 13
1..12
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
ok 8 rss_api.test_rxfh_fields_set
ok 9 rss_api.test_rxfh_fields_set_xfrm # SKIP no input-xfrm supported
ok 10 rss_api.test_rxfh_fields_ntf
ok 11 rss_api.test_rss_ctx_add
ok 12 rss_api.test_rss_ctx_ntf
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
Link: https://patch.msgid.link/20250717234343.2328602-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for IPv6 environment for napi_id test.
Test Plan:
./run_kselftest.sh -t drivers/net:napi_id.py
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net: napi_id.py
# TAP version 13
# 1..1
# ok 1 napi_id.test_napi_id
# # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: napi_id.py
Signed-off-by: Tianyi Cui <1997cui@gmail.com>
Link: https://patch.msgid.link/20250717011913.1248816-1-1997cui@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test configuring input-xfrm and hash fields with all the limitations.
Tested on mlx5 (CX6):
# ./ksft-net-drv/drivers/net/hw/rss_api.py
TAP version 13
1..10
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
ok 8 rss_api.test_rxfh_fields_set
ok 9 rss_api.test_rxfh_fields_set_xfrm
ok 10 rss_api.test_rxfh_fields_ntf
# Totals: pass:10 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20250716000331.1378807-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Help YNL decode the values for input-xfrm by defining
the possible values in the spec. Don't define "no change"
as it's an IOCTL artifact with no use in Netlink.
With this change on mlx5 input-xfrm gets decoded:
# ynl --family ethtool --dump rss-get
[{'header': {'dev-index': 2, 'dev-name': 'eth0'},
'hfunc': 1,
'hkey': b'V\xa8\xf9\x9 ...',
'indir': [0, 1, ... ],
'input-xfrm': {'sym-or-xor'}, <<<
'flow-hash': {'ah4': {'ip-dst', 'ip-src'},
'ah6': {'ip-dst', 'ip-src'},
'esp4': {'ip-dst', 'ip-src'},
'esp6': {'ip-dst', 'ip-src'},
'ip4': {'ip-dst', 'ip-src'},
'ip6': {'ip-dst', 'ip-src'},
'tcp4': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'tcp6': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'udp4': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'},
'udp6': {'l4-b-0-1', 'ip-dst', 'l4-b-2-3', 'ip-src'}}
}]
Reviewed-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250716000331.1378807-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test setting hashing key via Netlink.
# ./tools/testing/selftests/drivers/net/hw/rss_api.py
TAP version 13
1..7
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_nl_set_key
ok 7 rss_api.test_rxfh_fields
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20250716000331.1378807-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test setting indirection table via Netlink.
# ./tools/testing/selftests/drivers/net/hw/rss_api.py
TAP version 13
1..6
ok 1 rss_api.test_rxfh_nl_set_fail
ok 2 rss_api.test_rxfh_nl_set_indir
ok 3 rss_api.test_rxfh_nl_set_indir_ctx
ok 4 rss_api.test_rxfh_indir_ntf
ok 5 rss_api.test_rxfh_indir_ctx_ntf
ok 6 rss_api.test_rxfh_fields
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20250716000331.1378807-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multiple tests check min queue count, create a helper.
Link: https://patch.msgid.link/20250716000331.1378807-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a basic selftest for the netpoll polling mechanism, specifically
targeting the netpoll poll() side.
The test creates a scenario where network transmission is running at
maximum speed, and netpoll needs to poll the NIC. This is achieved by:
1. Configuring a single RX/TX queue to create contention
2. Generating background traffic to saturate the interface
3. Sending netconsole messages to trigger netpoll polling
4. Using dynamic netconsole targets via configfs
5. Delete and create new netconsole targets after some messages
6. Start a bpftrace in parallel to make sure netpoll_poll_dev() is
called
7. If bpftrace exists and netpoll_poll_dev() was called, stop.
The test validates a critical netpoll code path by monitoring traffic
flow and ensuring netpoll_poll_dev() is called when the normal TX path
is blocked.
This addresses a gap in netpoll test coverage for a path that is
tricky for the network stack.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-3-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bpftrace is very useful for low level driver testing. perf or trace-cmd
would also do for collecting data from tracepoints, but they require
much more post-processing.
Add a wrapper for running bpftrace and sanitizing its output.
bpftrace has JSON output, which is great, but it prints loose objects
and in a slightly inconvenient format. We have to read the objects
line by line, and while at it return them indexed by the map name.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250714-netpoll_test-v7-1-c0220cfaa63e@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I missed adding rss_api.py to the Makefile. The NIPA Makefile
checking script was scanning for shell scripts only, so it
didn't flag it either.
Fixes: 4d13c6c449af ("selftests: drv-net: test RSS Netlink notifications")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250712012005.4010263-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The iou-zcrx selftest currently runs the server on the remote host
and the client on the local host. This commit flips the endpoints
such that server runs on localhost and client on remote.
This change brings the iou-zcrx selftest in convention with other
selftests.
Drive-by fix for a missing import exception that happens when the
network interface has less than 2 combined channels.
Test plan: ran iou-zcrx.py selftest between 2 physical machines
Signed-off-by: Vishwanath Seshagiri <vishs@fb.com>
Link: https://patch.msgid.link/20250710165337.614159-1-vishs@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bpf utility to simplify the use of bpftool for XDP tests included in
this series.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250710184351.63797-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test reading RXFH fields over IOCTL and netlink.
# ./tools/testing/selftests/drivers/net/hw/rss_api.py
TAP version 13
1..3
ok 1 rss_api.test_rxfh_indir_ntf
ok 2 rss_api.test_rxfh_indir_ctx_ntf
ok 3 rss_api.test_rxfh_fields
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20250708220640.2738464-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Unlike the existing tests, this new test will create a memfd (backed by
hugetlb) and pin the folios in it (a small subset) before writing/
populating it with data. This is a valid use-case that invokes the
memfd_alloc_folio() kernel API and is expected to work unless there aren't
enough hugetlb folios to satisfy the allocation needs.
Link: https://lkml.kernel.org/r/20250618053415.1036185-4-vivek.kasireddy@intel.com
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Steve Sistare <steven.sistare@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add IPv6 support to the netconsole basic functionality tests by:
- Introducing separate IPv4 and IPv6 address variables (SRCIP4/SRCIP6,
DSTIP4/DSTIP6) to replace the single SRCIP/DSTIP variables
- Adding select_ipv4_or_ipv6() function to choose protocol version
- Updating socat configuration to use UDP6-LISTEN for IPv6 tests
- Adding wait_for_port() wrapper to handle protocol-specific port waiting
- Expanding test matrix to run both basic and extended formats against
both IPv4 and IPv6 protocols
- Improving cleanup to kill any remaining socat processes
- Adding sleep delays for better IPv6 packet handling reliability
The test now validates netconsole functionality across both IP versions,
improving test coverage for dual-stack network environments.
This test would avoid the regression fixed by commit f59902070269 ("net:
netpoll: Initialize UDP checksum field before checksumming")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250702-netpoll_untagle_ip-v2-7-13cf3db24e2b@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
distribution
This test suite validates the functionality of the devlink-rate API for
traffic class (TC) bandwidth allocation. It ensures that bandwidth can
be distributed between different traffic classes as configured, and
verifies that explicit TC-to-queue mapping is required for the
allocation to be effective.
The first test (test_no_tc_mapping_bandwidth) is marked as expected
failure on mlx5, since the hardware automatically enforces traffic
class separation by dynamically moving queues to the correct TC
scheduler, even without explicit TC-to-queue mapping configuration.
Test output on mlx5:
1..2
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results without TC mapping:
# TC 3: 0.19 Gbits/sec
# TC 4: 0.76 Gbits/sec
# Total bandwidth: 0.95 Gbits/sec
# TC 3 percentage: 20.0%
# TC 4 percentage: 80.0%
ok 1 devlink_rate_tc_bw.test_no_tc_mapping_bandwidth # XFAIL Bandwidth matched 80/20 split without TC mapping
# Created VF interface: eth5
# Created VLAN eth5.101 on eth5 with tc 3 and IP 198.51.100.2
# Created VLAN eth5.102 on eth5 with tc 4 and IP 198.51.100.10
# Set representor eth4 up and added to bridge
# Bandwidth check results with TC mapping:
# TC 3: 0.21 Gbits/sec
# TC 4: 0.78 Gbits/sec
# Total bandwidth: 0.98 Gbits/sec
# TC 3 percentage: 21.1%
# TC 4 percentage: 78.9%
# Bandwidth is distributed as 80/20 with TC mapping
ok 2 devlink_rate_tc_bw.test_tc_mapping_bandwidth
# Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-9-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test verifies that netdevsim correctly implements devlink ops callbacks
that set tc-bw on leaf or node rate object.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250629142138.361537-4-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
setup_wait() takes an optional argument and then is called from the top
level of the test script. That confuses shellcheck, which thinks that maybe
the intention is to pass $1 of the script to the function, which is never
the case. To avoid having to annotate every single new test with a SC
disable, split the function in two: one that takes a mandatory argument,
and one that takes no argument at all.
Convert the two existing users of that optional argument, both in Spectrum
resource selftest, to use the new form. Clean up vxlan_bridge_1q_mc_ul.sh
to not pass a now-unused argument.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/8e13123236fe3912ae29bc04a1528bdd8551da1f.1750847794.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc4).
Conflicts:
Documentation/netlink/specs/mptcp_pm.yaml
9e6dd4c256d0 ("netlink: specs: mptcp: replace underscores with dashes in names")
ec362192aa9e ("netlink: specs: fix up indentation errors")
https://lore.kernel.org/20250626122205.389c2cd4@canb.auug.org.au
Adjacent changes:
Documentation/netlink/specs/fou.yaml
791a9ed0a40d ("netlink: specs: fou: replace underscores with dashes in names")
880d43ca9aa4 ("netlink: specs: clean up spaces in brackets")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We're trying to add a strict regexp for the name format in the spec.
Underscores will not be allowed, dashes should be used instead.
This makes no difference to C (codegen replaces special chars in names)
but gives more uniform naming in Python.
Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash")
Fixes: 46fb3ba95b93 ("ethtool: Add an interface for flashing transceiver modules' firmware")
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250624211002.3475021-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test that changing the RSS config generates Netlink notifications.
# ./tools/testing/selftests/drivers/net/hw/rss_api.py
TAP version 13
1..2
ok 1 rss_api.test_rxfh_indir_ntf
ok 2 rss_api.test_rxfh_indir_ctx_ntf
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Link: https://patch.msgid.link/20250623231720.3124717-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
XFAIL is considered a form of a pass by our CI. For HW devices returning
XFAIL for unsupported features is counter-productive because our CI
knows not to expect any HW test to pass until it sees 10 passes in a row.
If we return xfail the test shows up as pass even if the device doesn't
support the feature. netdevsim supports all features necessary for
the stats test so there is no concern about running the test in SW mode.
Make the test skip rather than xfail if driver doesn't support FEC or pause.
Link: https://patch.msgid.link/20250620161109.2146242-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Small adjustments to make pylint happy.
One warning about unused argument remains because the test uses
global variables rather than attaching netlink sockets to cfg.
Fixing this would be too much of a change for a linter fix commit
like this one.
Link: https://patch.msgid.link/20250620161109.2146242-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pylint doesn't understand our path hacks, and it generates a lot
of warnings for driver tests. Import what we use one by one, this
is hopefully not too tedious and it makes pylint happy.
Link: https://patch.msgid.link/20250621171944.2619249-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc3).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that there is only one path in udp_tunnel, there is no need to
have udp_ports_sleep knob. Remove it and adjust the test.
Cc: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250616162117.287806-6-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the peer.sh test to run from INSTALL_PATH.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250617212102.175711-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the self-tests to cover the 'msgid' feature in sysdata.
Verify that msgid is appended to the message when the feature is enabled
and that it is not appended when the feature is disabled.
Signed-off-by: Gustavo Luiz Duarte <gustavold@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ipv4 support to the recently added chunks tests, which was added as
ipv6 only.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250615203511.591438-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Trivial fix to unused variable.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250615203511.591438-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new selftest to verify netconsole module loading with command
line arguments. This test exercises the init_netconsole() path and
validates proper parsing of the netconsole= parameter format.
The test:
- Loads netconsole module with cmdline configuration instead of
dynamic reconfiguration
- Validates message transmission through the configured target
- Adds helper functions for cmdline string generation and module
validation
This complements existing netconsole selftests by covering the
module initialization code path that processes boot-time parameters.
This test is useful to test issues like the one described in [1].
Link: https://lore.kernel.org/netdev/Z36TlACdNMwFD7wv@dev-ushankar.dev.purestorage.com/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-8-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract the network device and namespace cleanup logic from the
cleanup() function into a new do_cleanup() helper in lib_netcons.sh.
The do_cleanup() function only unconfigure the network and
printk, while cleanup() cleans the netconsole targets plus the network
and printk.
This refactoring let this code to be reused in cases netconsole dynamic
is not being used, as in the upcoming patch.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250613-rework-v3-7-0752bf2e6912@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.16-rc2).
No conflicts or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
context
Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).
The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
additional RSS contexts.
The test was written by AI, and reviewed by humans.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the netconsole selftest to validate both basic and extended
target formats. The basic format is a simpler variant that doesn't
support userdata or release functionality.
The test now validates that netconsole works correctly in both
configurations, improving test coverage for different netconsole
deployment scenarios.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-4-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the exit call from validate_result() function and move the
test exit logic to the main script. This allows the function to
be reused in scenarios where the test needs to continue execution
after validation, rather than terminating immediately.
The validate_result() function should focus on validation logic
only, while the calling script maintains control over program
flow and exit conditions. This change improves code modularity
and prepares for potential future enhancements where multiple
validations might be needed in a single test run.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-3-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 846742f7e32f ("selftests: drv-net: add a warning for
bkg + shell + terminate") added a warning for bkg() used
with terminate=True. The tso test was missed as we didn't
have it running anywhere in NIPA. Add exit_wait=True, to avoid:
# Warning: combining shell and terminate is risky!
# SIGTERM may not reach the child on zsh/ksh!
getting printed twice for every variant.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device type for IPv4 GRE is "gre" not "ipgre",
unlike for IPv6 which uses "ip6gre".
Not sure how I missed this when writing the test, perhaps
because all HW I have access to is on an IPv6-only network.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing config options for the tso.py test, specifically
to make sure the kernel is built with vxlan and gre tunnels.
I noticed this while adding a TSO-capable device QEMU to the CI.
Previously we only run virtio tests and it doesn't report LSO
stats on the QEMU we have.
Fixes: 0d0f4174f6c8 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This variable is unused and can be removed.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-9-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current test just sends "hello\nworld" and verifies that is the
string received on the RX side. That is fine, but improve the test a bit
by sending 1K data. The test should be improved further to send more
data, but for now this should be a welcome improvement.
The test will send a repeating pattern of 0x01, 0x02, ... 0x06. The
ncdevmem `-v 7` flag will verify this pattern. ncdevmem will provide
useful debugging info when the test fails, such as the frags received
and verified fine, and which frag exactly failed, what was the expected
byte pattern, and what is the actual byte pattern received. All this
debug information will be useful when the test fails.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ncdevmem supports drivers that are limited to either 3-tuple or 5-tuple
FS support, but the ksft is currently 3-tuple only. Support drivers that
have 5-tuple FS supported by adding a ksft arg.
Signed-off-by: Mina Almasry <almasrymina@google.com>
fix 5-tuple
fix 5-tuple
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-7-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This exit_wait seems necessary to make the rx side test pass for me.
I think this is just missed from the original test add patch. Add it now.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ncdevmem supports both ipv4 and ipv6, but the ksft is currently
ipv6-only. Propagate the ipv4 support to the ksft, so that folks that
are limited to these networks can also test.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
