| Age | Commit message (Collapse) | Author |
|---|
|
The intel-pt code dependent on __get_cpuid is no longer present so
remove the feature test in the Makefile.config.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Rather than having a feature test and include of <cpuid.h> for the
__get_cpuid function, use the cpuid function provided by
tools/perf/arch/x86/util/cpuid.h.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Pull VFIO seftest fixes from Alex Williamson:
- Fix vfio selftests to remove the expectation that the IOMMU supports
a 64-bit IOVA space.
These manifest both in the original set of tests introduced this
development cycle in identity mapping the IOVA to buffer virtual
address space, as well as the more recent boundary testing.
Implement facilities for collecting the valid IOVA ranges from the
backend, implement a simple IOVA allocator, and use the information
for determining extents (Alex Mastro)
* tag 'vfio-v6.18-rc6' of https://github.com/awilliam/linux-vfio:
vfio: selftests: replace iova=vaddr with allocated iovas
vfio: selftests: add iova allocator
vfio: selftests: fix map limit tests to use last available iova
vfio: selftests: add iova range query helpers
|
|
Executing the test_maps binary on platforms with extremely high core
counts may cause intermittent assertion failures in
test_update_delete() (called via test_map_parallel()). This can occur
because bpf_map_update_elem() under some circumstances (specifically
in this case while performing bpf_map_update_elem() with BPF_NOEXIST
on a BPF_MAP_TYPE_HASH with its map_flags set to BPF_F_NO_PREALLOC)
can return an E2BIG error code i.e.
error -7 7 tools/testing/selftests/bpf/test_maps.c:#: void
test_update_delete(unsigned int, void *): Assertion `err == 0' failed.
tools/testing/selftests/bpf/test_maps.c:#: void
__run_parallel(unsigned int, void (*)(unsigned int, void *), void *):
Assertion `status == 0' failed.
As it turns out, is_map_full() which is called from alloc_htab_elem()
can take on a conservative approach when htab->use_percpu_counter is
true (which is the case here because the percpu_counter is used when a
BPF_MAP_TYPE_HASH is created with its map_flags set to
BPF_F_NO_PREALLOC). This conservative approach prioritizes preventing
over-allocation and potential issues that could arise from possibly
exceeding htab->map.max_entries in highly concurrent environments,
even if it means slightly under-utilizing the htab map's capacity.
Given that bpf_map_update_elem() from test_update_delete() can return
E2BIG, update can_retry() such that it also accounts for the E2BIG
error code (specifically only when running with map_flags being set to
BPF_F_NO_PREALLOC). The retry loop will allow the global count
belonging to the percpu_counter to become synchronized and better
reflect the current htab map's capacity.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251113092519.2632079-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add test cases to verify that when MPTCP falls back to plain TCP sockets,
they can properly work with sockmap.
Additionally, add test cases to ensure that sockmap correctly rejects
MPTCP sockets as expected.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251111060307.194196-4-jiayuan.chen@linux.dev
|
|
Multiple threads may be creating and destroying BFD objects in
situations like `perf top`.
Without appropriate initialization crashes may occur during libbfd's
cache management.
BFD's locks require recursive mutexes, add support for these.
Committer testing:
This happens only when building with 'make BUILD_NONDISTRO=1' and having
the binutils-devel package (or equivalent) installed, i.e. linking with
binutils devel files, an opt-in perf build.
Before:
root@x1:~# perf top
perf: Segmentation fault
-------- backtrace --------
<SNIP multiple failed attempts at printing a backtrace>
root@x1:~#
After this patch it works as before.
Closes: https://lore.kernel.org/lkml/aQt66zhfxSA80xwt@gentoo.org/
Fixes: 95931d9a594dd0b5 ("perf libbfd: Move libbfd functionality to its own file")
Reported-by: Guilherme Amadio <amadio@gentoo.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.18-rc6).
No conflicts, adjacent changes in:
drivers/net/phy/micrel.c
96a9178a29a6 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface")
61b7ade9ba8c ("net: phy: micrel: Add support for non PTP SKUs for lan8814")
and a trivial one in tools/testing/selftests/drivers/net/Makefile.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Couple of independent fixes:
1. Wire in SIGSEGV handler that terminates the test with a failure code.
2. Use "--lock-cgroup" instead of "-g"; "-g" was proposed but never
merged. See commit 4d1792d0a2564caf ("perf lock contention: Add
--lock-cgroup option")
3. Call cleanup() on every normal exit so trap_cleanup() doesn't mistake
it for an unexpected signal and emit a false-negative "Unexpected
signal in main" message.
Before patch:
# ./perf test -vv "lock contention"
85: kernel lock contention analysis test:
--- start ---
test child forked, pid 610711
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --lock-cgroup
Unexpected signal in test_aggr_cgroup
---- end(0) ----
85: kernel lock contention analysis test : Ok
After patch:
# ./perf test -vv "lock contention"
85: kernel lock contention analysis test:
--- start ---
test child forked, pid 602637
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --lock-cgroup
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
Testing perf lock contention --callstack-filter (w/ unix_stream)
[Skip] Could not find 'unix_stream'
Testing perf lock contention --callstack-filter with task aggregation
[Skip] Could not find 'unix_stream'
Testing perf lock contention --cgroup-filter
Testing perf lock contention CSV output
---- end(0) ----
85: kernel lock contention analysis test : Ok
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Tycho Andersen <tycho@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Kernel maps are encoded in PERF_RECORD_MMAP2 samples but "perf lock
report" and "perf lock contention" do not process MMAP2 samples.
Because of that, machine->vmlinux_map stays NULL and any later access
triggers a segmentation fault.
Fix it by adding ->mmap2() callbacks.
Fixes: 53b00ff358dc75b1 ("perf record: Make --buildid-mmap the default")
Reported-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Tested-by: Tycho Andersen (AMD) <tycho@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
reason
To pick the changes in:
9d7dfb95da2cb5c1 ("KVM: VMX: Inject #UD if guest tries to execute SEAMCALL or TDCALL")
The 'perf kvm-stat' tool uses the exit reasons that are included in the
VMX_EXIT_REASONS define, this new SEAMCALL isn't included there (TDCALL
is), so shouldn't be causing any change in behaviour, this patch ends up
being just addressess the following perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Please see tools/include/uapi/README for further details.
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
not available
This is one more remnant of the BUILD_NONDISTRO series to make building
with binutils-devel opt-in due to license incompatibility.
In this case just the references at link time were still in place, which
make building the test-all.bin file fail, which wasn't detected before
probably because the last test was done with binutils-devel available,
doh.
Now:
$ rpm -q binutils-devel
package binutils-devel is not installed
$ file /tmp/build/perf-tools/feature/test-all.bin
/tmp/build/perf-tools/feature/test-all.bin: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=4b5388a346b51f1b993f0b0dbd49f4570769b03c, for GNU/Linux 3.2.0, not stripped
$
Fixes: 970ae86307718c34 ("perf build: The bfd features are opt-in, stop testing for them by default")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
With commit f0d0f978f3f5830a ("perf header: Don't write empty BPF/BTF
info"), the write_bpf_( prog_info() | btf() ) functions exit without
writing anything if env->bpf_prog.(infos| btfs)_cnt is zero.
process_bpf_( prog_info() | btf() ), however, still expect a "count"
value to exist in the data file. If btf information is empty, for
example, process_bpf_btf will read garbage or some other data as the
number of btf nodes in the data file. As a result, the data file will
not be processed correctly.
Instead, write the count to the data file and exit if it is zero.
Fixes: f0d0f978f3f5830a ("perf header: Don't write empty BPF/BTF info")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Thomas Falcon <thomas.falcon@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"Fixes event-filter-function.tc tracing test failure caused when a
first run to sample events triggers kmem_cache_free which interferes
with the rest of the test.
Fix this by calling sample_events twice to eliminate the
kmem_cache_free related noise from the sampling"
* tag 'linux_kselftest-fixes-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/tracing: Run sample events to clear page cache events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth and Wireless. No known outstanding
regressions.
Current release - regressions:
- eth:
- bonding: fix mii_status when slave is down
- mlx5e: fix missing error assignment in mlx5e_xfrm_add_state()
Previous releases - regressions:
- sched: limit try_bulk_dequeue_skb() batches
- ipv4: route: prevent rt_bind_exception() from rebinding stale fnhe
- af_unix: initialise scc_index in unix_add_edge()
- netpoll: fix incorrect refcount handling causing incorrect cleanup
- bluetooth: don't hold spin lock over sleeping functions
- hsr: Fix supervision frame sending on HSRv0
- sctp: prevent possible shift out-of-bounds
- tipc: fix use-after-free in tipc_mon_reinit_self().
- dsa: tag_brcm: do not mark link local traffic as offloaded
- eth: virtio-net: fix incorrect flags recording in big mode
Previous releases - always broken:
- sched: initialize struct tc_ife to fix kernel-infoleak
- wifi:
- mac80211: reject address change while connecting
- iwlwifi: avoid toggling links due to wrong element use
- bluetooth: cancel mesh send timer when hdev removed
- strparser: fix signed/unsigned mismatch bug
- handshake: fix memory leak in tls_handshake_accept()
Misc:
- selftests: mptcp: fix some flaky tests"
* tag 'net-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
hsr: Follow standard for HSRv0 supervision frames
hsr: Fix supervision frame sending on HSRv0
virtio-net: fix incorrect flags recording in big mode
ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe
wifi: iwlwifi: mld: always take beacon ies in link grading
wifi: iwlwifi: mvm: fix beacon template/fixed rate
wifi: iwlwifi: fix aux ROC time event iterator usage
net_sched: limit try_bulk_dequeue_skb() batches
selftests: mptcp: join: properly kill background tasks
selftests: mptcp: connect: trunc: read all recv data
selftests: mptcp: join: userspace: longer transfer
selftests: mptcp: join: endpoints: longer transfer
selftests: mptcp: join: rm: set backup flag
selftests: mptcp: connect: fix fallback note due to OoO
ethtool: fix incorrect kernel-doc style comment in ethtool.h
mlx5: Fix default values in create CQ
Bluetooth: btrtl: Avoid loading the config file on security chips
net/mlx5e: Fix potentially misleading debug message
net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps
net/mlx5e: Fix maxrate wraparound in threshold between units
...
|
|
Add test to verify that updating [lru_,]percpu_hash maps decrements
refcount when BPF_KPTR_REF objects are involved.
The tests perform the following steps:
. Call update_elem() to insert an initial value.
. Use bpf_refcount_acquire() to increment the refcount.
. Store the node pointer in the map value.
. Add the node to a linked list.
. Probe-read the refcount and verify it is *2*.
. Call update_elem() again to trigger refcount decrement.
. Probe-read the refcount and verify it is *1*.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251105151407.12723-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Enable unit testing for XOR address translation of SPA to DPA and vice versa.
|
|
Misc patches for CXL 6.19
- Remove incorrect page-allocator quirk section in documentation.
- Remove unused devm_cxl_port_enumerate_dports() function.
- Fix typo in cdat.c code comment.
- Replace use of system_wq with system_percpu_wq
- Add locked decoder support
- Return when generic target updated
- Rename region_res_match_cxl_range() to spa_maps_hpa()
- Clarify comment in spa_maps_hpa()
|
|
When compiled with -ffunction-sections, a function named startup() will
be placed in .text.startup. However, .text.startup is also used by the
compiler for functions with __attribute__((constructor)).
That creates an ambiguity for the vmlinux linker script, which needs to
differentiate those two cases.
Similar naming conflicts exist for functions named exit(), split(),
unlikely(), hot() and unknown().
One potential solution would be to use '#ifdef CC_USING_FUNCTION_SECTIONS'
to create two distinct implementations of the TEXT_MAIN macro. However,
-ffunction-sections can be (and is) enabled or disabled on a per-object
basis (for example via ccflags-y or AUTOFDO_PROFILE).
So the recently unified TEXT_MAIN macro (commit 1ba9f8979426
("vmlinux.lds: Unify TEXT_MAIN, DATA_MAIN, and related macros")) is
necessary. This means there's no way for the linker script to
disambiguate things.
Instead, use objtool to warn on any function names whose resulting
section names might create ambiguity when the kernel is compiled (in
whole or in part) with -ffunction-sections.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: live-patching@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/65fedea974fe14be487c8867a0b8d0e4a294ce1e.1762991150.git.jpoimboe@kernel.org
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Use the variable in case user has a custom install binary.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20251111155214.2760711-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For NICs with a large (1024+) number of queues, this test can cause
excessive memory fragmentation. This results in OOM errors, and in the
worst case driver/kernel crashes. We don't need to test with the max number
of queues, just enough to create a high likelihood of races between
reconfiguration and stats getting read.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20251111225319.3019542-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds test cases to verify the precise ip fallback logic:
- If the system supports precise ip, for an event given with the maximum
precision level, it should be able to decrease precise_ip to find a
supported level.
- The same fallback behavior should also work in more complex scenarios,
such as event groups or when PEBS is involved
Additional fallback tests, such as those covering missing feature cases,
can be added in the future.
Suggested-by: Ian Rogers <irogers@google.com>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Reviewed-by: Ian Rogers <irogers!@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The hung_task_panic sysctl is currently a blunt instrument: it's all or
nothing.
Panicking on a single hung task can be an overreaction to a transient
glitch. A more reliable indicator of a systemic problem is when
multiple tasks hang simultaneously.
Extend hung_task_panic to accept an integer threshold, allowing the
kernel to panic only when N hung tasks are detected in a single scan.
This provides finer control to distinguish between isolated incidents
and system-wide failures.
The accepted values are:
- 0: Don't panic (unchanged)
- 1: Panic on the first hung task (unchanged)
- N > 1: Panic after N hung tasks are detected in a single scan
The original behavior is preserved for values 0 and 1, maintaining full
backward compatibility.
[lance.yang@linux.dev: new changelog]
Link: https://lkml.kernel.org/r/20251015063615.2632-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Tested-by: Lance Yang <lance.yang@linux.dev>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au> [aspeed_g5_defconfig]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florian Wesphal <fw@strlen.de>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phil Auld <pauld@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add scx_cpu0, a simple scheduler that queues all tasks to a single DSQ and
only dispatches them from CPU0 in FIFO order. This is useful for testing bypass
behavior when many tasks are concentrated on a single CPU. If the load balancer
doesn't work, bypass mode can trigger task hangs or RCU stalls as the queue is
long and there's only one CPU working on it.
v2: Check whether task is on CPU0 at enqueue using scx_bpf_task_cpu() instead
of nr_cpus_allowed (Andrea Righi).
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Cc: Emil Tsalapatis <etsal@meta.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
vfio_dma_mapping_test and vfio_pci_driver_test currently use iova=vaddr
as part of DMA mapping operations. However, not all IOMMUs support the
same virtual address width as the processor. For instance, older Intel
consumer platforms only support 39-bits of IOMMU address space. On such
platforms, using the virtual address as the IOVA fails.
Make the tests more robust by using iova_allocator to vend IOVAs, which
queries legally accessible IOVAs from the underlying IOMMUFD or VFIO
container.
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251111-iova-ranges-v3-4-7960244642c5@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Add struct iova_allocator, which gives tests a convenient way to generate
legally-accessible IOVAs to map. This allocator traverses the sorted
available IOVA ranges linearly, requires power-of-two size allocations,
and does not support freeing iova allocations. The assumption is that
tests are not IOVA space-bounded, and will not need to recycle IOVAs.
This is based on Alex Williamson's patch series for adding an IOVA
allocator [1].
[1] https://lore.kernel.org/all/20251108212954.26477-1-alex@shazbot.org/
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251111-iova-ranges-v3-3-7960244642c5@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Use the newly available vfio_pci_iova_ranges() to determine the last
legal IOVA, and use this as the basis for vfio_dma_map_limit_test tests.
Fixes: de8d1f2fd5a5 ("vfio: selftests: add end of address space DMA map/unmap tests")
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251111-iova-ranges-v3-2-7960244642c5@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
VFIO selftests need to map IOVAs from legally accessible ranges, which
could vary between hardware. Tests in vfio_dma_mapping_test.c are making
excessively strong assumptions about which IOVAs can be mapped.
Add vfio_iommu_iova_ranges(), which queries IOVA ranges from the
IOMMUFD or VFIO container associated with the device. The queried ranges
are normalized to IOMMUFD's iommu_iova_range representation so that
handling of IOVA ranges up the stack can be implementation-agnostic.
iommu_iova_range and vfio_iova_range are equivalent, so bias to using the
new interface's struct.
Query IOMMUFD's ranges with IOMMU_IOAS_IOVA_RANGES.
Query VFIO container's ranges with VFIO_IOMMU_GET_INFO and
VFIO_IOMMU_TYPE1_INFO_CAP_IOVA_RANGE.
The underlying vfio_iommu_type1_info buffer-related functionality has
been kept generic so the same helpers can be used to query other
capability chain information, if needed.
Reviewed-by: David Matlack <dmatlack@google.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Alex Mastro <amastro@fb.com>
Link: https://lore.kernel.org/r/20251111-iova-ranges-v3-1-7960244642c5@fb.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Disable shellcheck rules SC2317 and SC2119. These rules are being
triggered due to false positives. For SC2317, many `return
"${KSFT_PASS}"` lines are reported as unreachable, even though they are
executed during normal runs. For SC2119, the fact that
log_guest/log_host accept either stdin or arguments triggers SC2119,
despite being valid.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-12-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add vsock_loopback module loading to the loopback test so that vmtest.sh
can be used for kernels built with loopback as a module.
This is not technically a fix as kselftest expects loopback to be
built-in already (defined in selftests/vsock/config). This is useful
only for using vmtest.sh outside of kselftest.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-11-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Testing with 1.37 shows all tests passing but emits the warning:
warning: vng version 'virtme-ng 1.37' has not been tested and may not function properly.
The following versions have been tested: 1.33 1.36
This patch adds 1.37 to the virtme-ng versions to get rid of the above
warning.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-10-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the definition for BUILD and initialize it to zero. This avoids
'bash -u vmtest.sh` from throwing 'unbound variable' when BUILD is not
set to 1 and is later checked for its value.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-9-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In preparation for future patches that introduce tests that cannot
re-use the same VM, add functions to identify those that *can* re-use a
VM.
By continuing to re-use the same VM for these tests we can save time by
avoiding the delay of booting a VM for every test.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-8-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add check_result() function to reuse logic for incrementing the
pass/fail counters. This function will get used by different callers as
we add different types of tests in future patches (namely, namespace and
non-namespace tests will be called at different places, and re-use this
function).
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-7-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reduce the time waiting for the QEMU pidfile from three minutes to five
seconds. The three minute time window was chosen to make sure QEMU had
enough time to fully boot up. This, however, is an unreasonably long
delay for QEMU to write the pidfile, which happens earlier when the QEMU
process starts (not after VM boot). The three minute delay becomes
noticeably wasteful in future tests that expect QEMU to fail and wait a
full three minutes for a pidfile that will never exist.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-6-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If QEMU fails to boot, then set the returncode (via timeout) instead of
unconditionally dying. This is in preparation for tests that expect QEMU
to fail to boot. In that case, we just want to know if the boot failed
or not so we can test the pass/fail criteria, and continue executing the
next test.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-5-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change QEMU to use generated pidfile names instead of just a single
globally-defined pidfile. This allows multiple QEMU instances to
co-exist with different pidfiles. This is required for future tests that
use multiple VMs to check for CID collissions.
Additionally, this also places the burden of killing the QEMU process
and cleaning up the pidfile on the caller of vm_start(). To help with
this, a function terminate_pidfiles() is introduced that callers use to
perform the cleanup. The terminate_pidfiles() function supports multiple
pidfile removals because future patches will need to process two
pidfiles at a time.
Change QEMU_OPTS to be initialized inside the vm_start(). This allows
the generated pidfile to be passed to the string assignment, and
prepares for future vm-specific options as well (e.g., cid).
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-4-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add wrapper functions vm_vsock_test() and host_vsock_test() to invoke
the vsock_test binary. This encapsulates several items of repeat logic,
such as waiting for the server to reach listening state and
enabling/disabling the bash option pipefail to avoid pipe-style logging
from hiding failures.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-3-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rewrite wait_for_listener()'s pattern matching to avoid tripping the
if-condition when pipefail is on.
awk doesn't gracefully handle SIGPIPE with a non-zero exit code, so grep
exiting upon finding a match causes false-positives when the pipefail
option is used (grep exits, SIGPIPE emits, and awk complains with a
non-zero exit code). Instead, move all of the pattern matching into awk
so that SIGPIPE cannot happen and the correct exit code is returned.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-2-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Improve usability of logging functions. Remove the test name prefix from
logging functions so that logging calls can be made deeper into the call
stack without passing down the test name or setting some global. Teach
log function to accept a LOG_PREFIX variable to avoid unnecessary
argument shifting.
Remove log_setup() and instead use log_host(). The host/guest prefixes
are useful to show whether a failure happened on the guest or host side,
but "setup" doesn't really give additional useful information. Since all
log_setup() calls happen on the host, lets just use log_host() instead.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-1-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Test how KVM handles guest SEA when APEI is unable to claim it, and
KVM_CAP_ARM_SEA_TO_USER is enabled.
The behavior is triggered by consuming recoverable memory error (UER)
injected via EINJ. The test asserts two major things:
1. KVM returns to userspace with KVM_EXIT_ARM_SEA exit reason, and
has provided expected fault information, e.g. esr, flags, gva, gpa.
2. Userspace is able to handle KVM_EXIT_ARM_SEA by injecting SEA to
guest and KVM injects expected SEA into the VCPU.
Tested on a data center server running Siryn AmpereOne processor
that has RAS support.
Several things to notice before attempting to run this selftest:
- The test relies on EINJ support in both firmware and kernel to
inject UER. Otherwise the test will be skipped.
- The under-test platform's APEI should be unable to claim the SEA.
Otherwise the test will be skipped.
- Some platform doesn't support notrigger in EINJ, which may cause
APEI and GHES to offline the memory before guest can consume
injected UER, and making test unable to trigger SEA.
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Link: https://msgid.link/20251013185903.1372553-3-jiaqiyan@google.com
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
The 'run_tests' function is executed in the background, but killing its
associated PID would not kill the children tasks running in the
background.
To properly kill all background tasks, 'kill -- -PID' could be used, but
this requires kill from procps-ng. Instead, all children tasks are
listed using 'ps', and 'kill' is called with all PIDs of this group.
Fixes: 31ee4ad86afd ("selftests: mptcp: join: stop transfer when check is done (part 1)")
Cc: stable@vger.kernel.org
Fixes: 04b57c9e096a ("selftests: mptcp: join: stop transfer when check is done (part 2)")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-6-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MPTCP Join "fastclose server" selftest is sometimes failing because the
client output file doesn't have the expected size, e.g. 296B instead of
1024B.
When looking at a packet trace when this happens, the server sent the
expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE.
It is then strange to see the client only receiving 296B, which would
mean it only got a part of the second packet. The problem is then not on
the networking side, but rather on the data reception side.
When mptcp_connect is launched with '-f -1', it means the connection
might stop before having sent everything, because a reset has been
received. When this happens, the program was directly stopped. But it is
also possible there are still some data to read, simply because the
previous 'read' step was done with a buffer smaller than the pending
data, see do_rnd_read(). In this case, it is important to read what's
left in the kernel buffers before stopping without error like before.
SIGPIPE is now ignored, not to quit the app before having read
everything.
Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all userspace tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org
Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-4-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to make the
connection longer. This connection will be killed at the end, after the
verifications, so making it longer doesn't change anything, apart from
avoid it to end before the end of the verifications
To play it safe, all endpoints tests not waiting for the end of the
transfer are now sharing a longer file (128KB) at slow speed.
Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases")
Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd")
Fixes: e06959e9eebd ("selftests: mptcp: join: test for flush/re-add endpoints")
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-3-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
Fixes: d2c4333a801c ("selftests: mptcp: add testcases for removing addrs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The "fallback due to TCP OoO" was never printed because the stat_ooo_now
variable was checked twice: once in the parent if-statement, and one in
the child one. The second condition was then always true then, and the
'else' branch was never taken.
The idea is that when there are more ACK + MP_CAPABLE than expected, the
test either fails if there was no out of order packets, or a notice is
printed.
Fixes: 69ca3d29a755 ("mptcp: update selftest for fallback due to OoO")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
One of my concern in the perf stat output was the alignment in the
metrics and shadow stats. I think it missed to calculate the basic
output length using COUNTS_LEN and EVNAME_LEN but missed to add the
unit length like "msec" and surround 2 spaces. I'm not sure why it's
not printed below though.
But anyway, now it shows correctly aligned metric output.
$ perf stat true
Performance counter stats for 'true':
859,772 task-clock # 0.395 CPUs utilized
0 context-switches # 0.000 /sec
0 cpu-migrations # 0.000 /sec
56 page-faults # 65.134 K/sec
1,075,022 instructions # 0.86 insn per cycle
1,255,911 cycles # 1.461 GHz
220,573 branches # 256.548 M/sec
7,381 branch-misses # 3.35% of all branches
TopdownL1 # 19.2 % tma_retiring
# 28.6 % tma_backend_bound
# 9.5 % tma_bad_speculation
# 42.6 % tma_frontend_bound
0.002174871 seconds time elapsed ^
|
0.002154000 seconds user |
0.000000000 seconds sys here
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
For the sake of better documentation, add core_wide and target_cpu to
the tool.json. When the values of system_wide and
user_requested_cpu_list are unknown, use the values from the global
stat_config.
Example output showing how '-a' modifies the values in `perf stat`:
```
$ perf stat -e core_wide,target_cpu true
Performance counter stats for 'true':
0 core_wide
0 target_cpu
0.000993787 seconds time elapsed
0.001128000 seconds user
0.000000000 seconds sys
$ perf stat -e core_wide,target_cpu -a true
Performance counter stats for 'system wide':
1 core_wide
1 target_cpu
0.002271723 seconds time elapsed
$ perf list
...
tool:
core_wide
[1 if not SMT,if SMT are events being gathered on all SMT threads 1 otherwise 0. Unit: tool]
...
target_cpu
[1 if CPUs being analyzed,0 if threads/processes. Unit: tool]
...
```
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Explicitly use a metric rather than implicitly expecting '-e
instructions,cycles' to produce a metric. Use a metric with software
events to make it more compatible.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
