summaryrefslogtreecommitdiff
path: root/virt/kvm/arm
AgeCommit message (Collapse)Author
2014-05-13KVM: ARM: vgic: Fix sgi dispatch problemHaibin Wang
commit 91021a6c8ffdc55804dab5acdfc7de4f278b9ac3 upstream. When dispatch SGI(mode == 0), that is the vcpu of VM should send sgi to the cpu which the target_cpus list. So, there must add the "break" to branch of case 0. Signed-off-by: Haibin Wang <wanghaibin.wang@huawei.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-14arm64: KVM: Add VGIC device control for arm64Christoffer Dall
This fixes the build breakage introduced by c07a0191ef2de1f9510f12d1f88e3b0b5cd8d66f and adds support for the device control API and save/restore of the VGIC state for ARMv8. The defines were simply missing from the arm64 header files and uaccess.h must be implicitly imported from somewhere else on arm. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-12-21KVM: arm-vgic: Support CPU interface reg accessChristoffer Dall
Implement support for the CPU interface register access driven by MMIO address offsets from the CPU interface base address. Useful for user space to support save/restore of the VGIC state. This commit adds support only for the same logic as the current VGIC support, and no more. For example, the active priority registers are handled as RAZ/WI, just like setting priorities on the emulated distributor. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlersChristoffer Dall
Handle MMIO accesses to the two registers which should support both the case where the VMs want to read/write either of these registers and the case where user space reads/writes these registers to do save/restore of the VGIC state. Note that the added complexity compared to simple set/clear enable registers stems from the bookkeping of source cpu ids. It may be possible to change the underlying data structure to simplify the complexity, but since this is not in the critical path at all, this will do. Also note that reading this register from a live guest will not be accurate compared to on hardware, because some state may be living on the CPU LRs and the only way to give a consistent read would be to force stop all the VCPUs and request them to unqueu the LR state onto the distributor. Until we have an actual user of live reading this register, we can live with the difference. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21KVM: arm-vgic: Support unqueueing of LRs to the distChristoffer Dall
To properly access the VGIC state from user space it is very unpractical to have to loop through all the LRs in all register access functions. Instead, support moving all pending state from LRs to the distributor, but leave active state LRs alone. Note that to accurately present the active and pending state to VCPUs reading these distributor registers from a live VM, we would have to stop all other VPUs than the calling VCPU and ask each CPU to unqueue their LR state onto the distributor and add fields to track active state on the distributor side as well. We don't have any users of such functionality yet and there are other inaccuracies of the GIC emulation, so don't provide accurate synchronized access to this state just yet. However, when the time comes, having this function should help. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21KVM: arm-vgic: Add vgic reg access from dev attrChristoffer Dall
Add infrastructure to handle distributor and cpu interface register accesses through the KVM_{GET/SET}_DEVICE_ATTR interface by adding the KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS groups and defining the semantics of the attr field to be the MMIO offset as specified in the GICv2 specs. Missing register accesses or other changes in individual register access functions to support save/restore of the VGIC state is added in subsequent patches. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21KVM: arm-vgic: Make vgic mmio functions more genericChristoffer Dall
Rename the vgic_ranges array to vgic_dist_ranges to be more specific and to prepare for handling CPU interface register access as well (for save/restore of VGIC state). Pass offset from distributor or interface MMIO base to find_matching_range function instead of the physical address of the access in the VM memory map. This allows other callers unaware of the VM specifics, but with generic VGIC knowledge to reuse the function. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21KVM: arm-vgic: Set base addr through device APIChristoffer Dall
Support setting the distributor and cpu interface base addresses in the VM physical address space through the KVM_{SET,GET}_DEVICE_ATTR API in addition to the ARM specific API. This has the added benefit of being able to share more code in user space and do things in a uniform manner. Also deprecate the older API at the same time, but backwards compatibility will be maintained. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGICChristoffer Dall
Support creating the ARM VGIC device through the KVM_CREATE_DEVICE ioctl, which can then later be leveraged to use the KVM_{GET/SET}_DEVICE_ATTR, which is useful both for setting addresses in a more generic API than the ARM-specific one and is useful for save/restore of VGIC state. Adds KVM_CAP_DEVICE_CTRL to ARM capabilities. Note that we change the check for creating a VGIC from bailing out if any VCPUs were created, to bailing out if any VCPUs were ever run. This is an important distinction that shouldn't break anything, but allows creating the VGIC after the VCPUs have been created. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21ARM: KVM: Allow creating the VGIC after VCPUsChristoffer Dall
Rework the VGIC initialization slightly to allow initialization of the vgic cpu-specific state even if the irqchip (the VGIC) hasn't been created by user space yet. This is safe, because the vgic data structures are already allocated when the CPU is allocated if VGIC support is compiled into the kernel. Further, the init process does not depend on any other information and the sacrifice is a slight performance degradation for creating VMs in the no-VGIC case. The reason is that the new device control API doesn't mandate creating the VGIC before creating the VCPU and it is unreasonable to require user space to create the VGIC before creating the VCPUs. At the same time move the irqchip_in_kernel check out of kvm_vcpu_first_run_init and into the init function to make the per-vcpu and global init functions symmetric and add comments on the exported functions making it a bit easier to understand the init flow by only looking at vgic.c. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21ARM/KVM: save and restore generic timer registersAndre Przywara
For migration to work we need to save (and later restore) the state of each core's virtual generic timer. Since this is per VCPU, we can use the [gs]et_one_reg ioctl and export the three needed registers (control, counter, compare value). Though they live in cp15 space, we don't use the existing list, since they need special accessor functions and the arch timer is optional. Acked-by: Marc Zynger <marc.zyngier@arm.com> Signed-off-by: Andre Przywara <andre.przywara@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-12-21arm/arm64: KVM: arch_timer: Initialize cntvoff at kvm_initChristoffer Dall
Initialize the cntvoff at kvm_init_vm time, not before running the VCPUs at the first time because that will overwrite any potentially restored values from user space. Cc: Andre Przywara <andre.przywara@linaro.org> Acked-by: Marc Zynger <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2013-08-30ARM: KVM: Bugfix: vgic_bytemap_get_reg per cpu regsChristoffer Dall
For bytemaps each IRQ field is 1 byte wide, so we pack 4 irq fields in one word and since there are 32 private (per cpu) irqs, we have 8 private u32 fields on the vgic_bytemap struct. We shift the offset from the base of the register group right by 2, giving us the word index instead of the field index. But then there are 8 private words, not 4, which is also why we subtract 8 words from the offset of the shared words. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-30ARM: KVM: vgic: fix GICD_ICFGRn accessMarc Zyngier
All the code in handle_mmio_cfg_reg() assumes the offset has been shifted right to accomodate for the 2:1 bit compression, but this is only done when getting the register address. Shift the offset early so the code works mostly unchanged. Reported-by: Zhaobo (Bob, ERC) <zhaobo@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-08-30ARM: KVM: vgic: simplify vgic_get_target_regMarc Zyngier
vgic_get_target_reg is quite complicated, for no good reason. Actually, it is fairly easy to write it in a much more efficient way by using the target CPU array instead of the bitmap. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-07-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM fixes from Paolo Bonzini: "On the x86 side, there are some optimizations and documentation updates. The big ARM/KVM change for 3.11, support for AArch64, will come through Catalin Marinas's tree. s390 and PPC have misc cleanups and bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (87 commits) KVM: PPC: Ignore PIR writes KVM: PPC: Book3S PR: Invalidate SLB entries properly KVM: PPC: Book3S PR: Allow guest to use 1TB segments KVM: PPC: Book3S PR: Don't keep scanning HPTEG after we find a match KVM: PPC: Book3S PR: Fix invalidation of SLB entry 0 on guest entry KVM: PPC: Book3S PR: Fix proto-VSID calculations KVM: PPC: Guard doorbell exception with CONFIG_PPC_DOORBELL KVM: Fix RTC interrupt coalescing tracking kvm: Add a tracepoint write_tsc_offset KVM: MMU: Inform users of mmio generation wraparound KVM: MMU: document fast invalidate all mmio sptes KVM: MMU: document fast invalidate all pages KVM: MMU: document fast page fault KVM: MMU: document mmio page fault KVM: MMU: document write_flooding_count KVM: MMU: document clear_spte_count KVM: MMU: drop kvm_mmu_zap_mmio_sptes KVM: MMU: init kvm generation close to mmio wrap-around value KVM: MMU: add tracepoint for check_mmio_spte KVM: MMU: fast invalidate all mmio sptes ...
2013-06-26ARM: KVM: Allow host virt timer irq to be different from guest timer virt irqAnup Patel
The arch_timer irq numbers (or PPI numbers) are implementation dependent, so the host virtual timer irq number can be different from guest virtual timer irq number. This patch ensures that host virtual timer irq number is read from DTB and guest virtual timer irq is determined based on vcpu target type. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-05-19ARM: KVM: move GIC/timer code to a common locationMarc Zyngier
As KVM/arm64 is looming on the horizon, it makes sense to move some of the common code to a single location in order to reduce duplication. The code could live anywhere. Actually, most of KVM is already built with a bunch of ugly ../../.. hacks in the various Makefiles, so we're not exactly talking about style here. But maybe it is time to start moving into a less ugly direction. The include files must be in a "public" location, as they are accessed from non-KVM files (arch/arm/kernel/asm-offsets.c). For this purpose, introduce two new locations: - virt/kvm/arm/ : x86 and ia64 already share the ioapic code in virt/kvm, so this could be seen as a (very ugly) precedent. - include/kvm/ : there is already an include/xen, and while the intent is slightly different, this seems as good a location as any Eventually, we should probably have independant Makefiles at every levels (just like everywhere else in the kernel), but this is just the first step. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Gleb Natapov <gleb@redhat.com>