From 11205bb63e5c2e5174f377595103005b00c68370 Mon Sep 17 00:00:00 2001 From: Amy Maloche Date: Mon, 1 Aug 2011 23:41:44 -0700 Subject: Input: add support for pm8xxx based vibrator driver Add support for pm8xx based vibrator to facilitate haptics. This module uses the ff-memless framework. Signed-off-by: Amy Maloche Signed-off-by: Anirudh Ghayal Reviewed-by: Wanlong Gao Signed-off-by: Dmitry Torokhov --- drivers/input/misc/Kconfig | 34 ++-- drivers/input/misc/Makefile | 3 +- drivers/input/misc/pm8xxx-vibrator.c | 296 +++++++++++++++++++++++++++++++++++ 3 files changed, 321 insertions(+), 12 deletions(-) create mode 100644 drivers/input/misc/pm8xxx-vibrator.c diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 01344280e145..40bcedafd4ac 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -74,6 +74,29 @@ config INPUT_PCSPKR To compile this driver as a module, choose M here: the module will be called pcspkr. +config INPUT_PM8XXX_VIBRATOR + tristate "Qualcomm PM8XXX vibrator support" + depends on MFD_PM8XXX + select INPUT_FF_MEMLESS + help + This option enables device driver support for the vibrator + on Qualcomm PM8xxx chip. This driver supports ff-memless interface + from input framework. + + To compile this driver as module, choose M here: the + module will be called pm8xxx-vibrator. + +config INPUT_PMIC8XXX_PWRKEY + tristate "PMIC8XXX power key support" + depends on MFD_PM8XXX + help + Say Y here if you want support for the PMIC8XXX power key. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called pmic8xxx-pwrkey. + config INPUT_SPARCSPKR tristate "SPARC Speaker support" depends on PCI && SPARC64 @@ -368,17 +391,6 @@ config INPUT_PWM_BEEPER To compile this driver as a module, choose M here: the module will be called pwm-beeper. -config INPUT_PMIC8XXX_PWRKEY - tristate "PMIC8XXX power key support" - depends on MFD_PM8XXX - help - Say Y here if you want support for the PMIC8XXX power key. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called pmic8xxx-pwrkey. - config INPUT_GPIO_ROTARY_ENCODER tristate "Rotary encoders connected to GPIO pins" depends on GPIOLIB && GENERIC_GPIO diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index be39d813354d..0caad97e7dd0 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -34,9 +34,10 @@ obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o +obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o +obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o -obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o diff --git a/drivers/input/misc/pm8xxx-vibrator.c b/drivers/input/misc/pm8xxx-vibrator.c new file mode 100644 index 000000000000..43192930824b --- /dev/null +++ b/drivers/input/misc/pm8xxx-vibrator.c @@ -0,0 +1,296 @@ +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define VIB_DRV 0x4A + +#define VIB_DRV_SEL_MASK 0xf8 +#define VIB_DRV_SEL_SHIFT 0x03 +#define VIB_DRV_EN_MANUAL_MASK 0xfc + +#define VIB_MAX_LEVEL_mV (3100) +#define VIB_MIN_LEVEL_mV (1200) +#define VIB_MAX_LEVELS (VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV) + +#define MAX_FF_SPEED 0xff + +/** + * struct pm8xxx_vib - structure to hold vibrator data + * @vib_input_dev: input device supporting force feedback + * @work: work structure to set the vibration parameters + * @dev: device supporting force feedback + * @speed: speed of vibration set from userland + * @active: state of vibrator + * @level: level of vibration to set in the chip + * @reg_vib_drv: VIB_DRV register value + */ +struct pm8xxx_vib { + struct input_dev *vib_input_dev; + struct work_struct work; + struct device *dev; + int speed; + int level; + bool active; + u8 reg_vib_drv; +}; + +/** + * pm8xxx_vib_read_u8 - helper to read a byte from pmic chip + * @vib: pointer to vibrator structure + * @data: placeholder for data to be read + * @reg: register address + */ +static int pm8xxx_vib_read_u8(struct pm8xxx_vib *vib, + u8 *data, u16 reg) +{ + int rc; + + rc = pm8xxx_readb(vib->dev->parent, reg, data); + if (rc < 0) + dev_warn(vib->dev, "Error reading pm8xxx reg 0x%x(0x%x)\n", + reg, rc); + return rc; +} + +/** + * pm8xxx_vib_write_u8 - helper to write a byte to pmic chip + * @vib: pointer to vibrator structure + * @data: data to write + * @reg: register address + */ +static int pm8xxx_vib_write_u8(struct pm8xxx_vib *vib, + u8 data, u16 reg) +{ + int rc; + + rc = pm8xxx_writeb(vib->dev->parent, reg, data); + if (rc < 0) + dev_warn(vib->dev, "Error writing pm8xxx reg 0x%x(0x%x)\n", + reg, rc); + return rc; +} + +/** + * pm8xxx_vib_set - handler to start/stop vibration + * @vib: pointer to vibrator structure + * @on: state to set + */ +static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on) +{ + int rc; + u8 val = vib->reg_vib_drv; + + if (on) + val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK); + else + val &= ~VIB_DRV_SEL_MASK; + + rc = pm8xxx_vib_write_u8(vib, val, VIB_DRV); + if (rc < 0) + return rc; + + vib->reg_vib_drv = val; + return 0; +} + +/** + * pm8xxx_work_handler - worker to set vibration level + * @work: pointer to work_struct + */ +static void pm8xxx_work_handler(struct work_struct *work) +{ + struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work); + int rc; + u8 val; + + rc = pm8xxx_vib_read_u8(vib, &val, VIB_DRV); + if (rc < 0) + return; + + /* + * pmic vibrator supports voltage ranges from 1.2 to 3.1V, so + * scale the level to fit into these ranges. + */ + if (vib->speed) { + vib->active = true; + vib->level = ((VIB_MAX_LEVELS * vib->speed) / MAX_FF_SPEED) + + VIB_MIN_LEVEL_mV; + vib->level /= 100; + } else { + vib->active = false; + vib->level = VIB_MIN_LEVEL_mV / 100; + } + + pm8xxx_vib_set(vib, vib->active); +} + +/** + * pm8xxx_vib_close - callback of input close callback + * @dev: input device pointer + * + * Turns off the vibrator. + */ +static void pm8xxx_vib_close(struct input_dev *dev) +{ + struct pm8xxx_vib *vib = input_get_drvdata(dev); + + cancel_work_sync(&vib->work); + if (vib->active) + pm8xxx_vib_set(vib, false); +} + +/** + * pm8xxx_vib_play_effect - function to handle vib effects. + * @dev: input device pointer + * @data: data of effect + * @effect: effect to play + * + * Currently this driver supports only rumble effects. + */ +static int pm8xxx_vib_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct pm8xxx_vib *vib = input_get_drvdata(dev); + + vib->speed = effect->u.rumble.strong_magnitude >> 8; + if (!vib->speed) + vib->speed = effect->u.rumble.weak_magnitude >> 9; + + schedule_work(&vib->work); + + return 0; +} + +static int __devinit pm8xxx_vib_probe(struct platform_device *pdev) + +{ + struct pm8xxx_vib *vib; + struct input_dev *input_dev; + int error; + u8 val; + + vib = kzalloc(sizeof(*vib), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!vib || !input_dev) { + dev_err(&pdev->dev, "couldn't allocate memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + INIT_WORK(&vib->work, pm8xxx_work_handler); + vib->dev = &pdev->dev; + vib->vib_input_dev = input_dev; + + /* operate in manual mode */ + error = pm8xxx_vib_read_u8(vib, &val, VIB_DRV); + if (error < 0) + goto err_free_mem; + val &= ~VIB_DRV_EN_MANUAL_MASK; + error = pm8xxx_vib_write_u8(vib, val, VIB_DRV); + if (error < 0) + goto err_free_mem; + + vib->reg_vib_drv = val; + + input_dev->name = "pm8xxx_vib_ffmemless"; + input_dev->id.version = 1; + input_dev->dev.parent = &pdev->dev; + input_dev->close = pm8xxx_vib_close; + input_set_drvdata(input_dev, vib); + input_set_capability(vib->vib_input_dev, EV_FF, FF_RUMBLE); + + error = input_ff_create_memless(input_dev, NULL, + pm8xxx_vib_play_effect); + if (error) { + dev_err(&pdev->dev, + "couldn't register vibrator as FF device\n"); + goto err_free_mem; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "couldn't register input device\n"); + goto err_destroy_memless; + } + + platform_set_drvdata(pdev, vib); + return 0; + +err_destroy_memless: + input_ff_destroy(input_dev); +err_free_mem: + input_free_device(input_dev); + kfree(vib); + + return error; +} + +static int __devexit pm8xxx_vib_remove(struct platform_device *pdev) +{ + struct pm8xxx_vib *vib = platform_get_drvdata(pdev); + + input_unregister_device(vib->vib_input_dev); + kfree(vib); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int pm8xxx_vib_suspend(struct device *dev) +{ + struct pm8xxx_vib *vib = dev_get_drvdata(dev); + + /* Turn off the vibrator */ + pm8xxx_vib_set(vib, false); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL); + +static struct platform_driver pm8xxx_vib_driver = { + .probe = pm8xxx_vib_probe, + .remove = __devexit_p(pm8xxx_vib_remove), + .driver = { + .name = "pm8xxx-vib", + .owner = THIS_MODULE, + .pm = &pm8xxx_vib_pm_ops, + }, +}; + +static int __init pm8xxx_vib_init(void) +{ + return platform_driver_register(&pm8xxx_vib_driver); +} +module_init(pm8xxx_vib_init); + +static void __exit pm8xxx_vib_exit(void) +{ + platform_driver_unregister(&pm8xxx_vib_driver); +} +module_exit(pm8xxx_vib_exit); + +MODULE_ALIAS("platform:pm8xxx_vib"); +MODULE_DESCRIPTION("PMIC8xxx vibrator driver based on ff-memless framework"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Amy Maloche "); -- cgit v1.2.3