From 02cdfcf043c5c6ebcbbaba1c35130b5fbcb10867 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Fri, 12 Nov 2010 15:38:21 -0600 Subject: [libata] new driver acard_ahci, for ATP8620 host controller Add support for Acard ATP8620 host controller. Based upon initial version by Jeff Garzik. Signed-off-by: David Milburn Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 8 + drivers/ata/Makefile | 1 + drivers/ata/acard-ahci.c | 528 +++++++++++++++++++++++++++++++++++++++++++++++ drivers/ata/ahci.h | 3 + drivers/ata/libahci.c | 11 +- 5 files changed, 545 insertions(+), 6 deletions(-) create mode 100644 drivers/ata/acard-ahci.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 36e2319264bd..e3e0e95c7aa5 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -90,6 +90,14 @@ config SATA_INIC162X help This option enables support for Initio 162x Serial ATA. +config SATA_ACARD_AHCI + tristate "ACard AHCI variant (ATP 8620)" + depends on PCI + help + This option enables support for Acard. + + If unsure, say N. + config SATA_SIL24 tristate "Silicon Image 3124/3132 SATA support" depends on PCI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 2b67c900a459..27291aad6ca7 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -3,6 +3,7 @@ obj-$(CONFIG_ATA) += libata.o # non-SFF interface obj-$(CONFIG_SATA_AHCI) += ahci.o libahci.o +obj-$(CONFIG_SATA_ACARD_AHCI) += acard-ahci.o libahci.o obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o obj-$(CONFIG_SATA_FSL) += sata_fsl.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c new file mode 100644 index 000000000000..339c210f03a6 --- /dev/null +++ b/drivers/ata/acard-ahci.c @@ -0,0 +1,528 @@ + +/* + * acard-ahci.c - ACard AHCI SATA support + * + * Maintained by: Jeff Garzik + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2010 Red Hat, Inc. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * AHCI hardware documentation: + * http://www.intel.com/technology/serialata/pdf/rev1_0.pdf + * http://www.intel.com/technology/serialata/pdf/rev1_1.pdf + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ahci.h" + +#define DRV_NAME "acard-ahci" +#define DRV_VERSION "1.0" + +/* + Received FIS structure limited to 80h. +*/ + +#define ACARD_AHCI_RX_FIS_SZ 128 + +enum { + AHCI_PCI_BAR = 5, +}; + +enum board_ids { + board_acard_ahci, +}; + +struct acard_sg { + __le32 addr; + __le32 addr_hi; + __le32 reserved; + __le32 size; /* bit 31 (EOT) max==0x10000 (64k) */ +}; + +static void acard_ahci_qc_prep(struct ata_queued_cmd *qc); +static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc); +static int acard_ahci_port_start(struct ata_port *ap); +static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + +#ifdef CONFIG_PM +static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); +static int acard_ahci_pci_device_resume(struct pci_dev *pdev); +#endif + +static struct scsi_host_template acard_ahci_sht = { + AHCI_SHT("acard-ahci"), +}; + +static struct ata_port_operations acard_ops = { + .inherits = &ahci_ops, + .qc_prep = acard_ahci_qc_prep, + .qc_fill_rtf = acard_ahci_qc_fill_rtf, + .port_start = acard_ahci_port_start, +}; + +#define AHCI_HFLAGS(flags) .private_data = (void *)(flags) + +static const struct ata_port_info acard_ahci_port_info[] = { + [board_acard_ahci] = + { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &acard_ops, + }, +}; + +static const struct pci_device_id acard_ahci_pci_tbl[] = { + /* ACard */ + { PCI_VDEVICE(ARTOP, 0x000d), board_acard_ahci }, /* ATP8620 */ + + { } /* terminate list */ +}; + +static struct pci_driver acard_ahci_pci_driver = { + .name = DRV_NAME, + .id_table = acard_ahci_pci_tbl, + .probe = acard_ahci_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM + .suspend = acard_ahci_pci_device_suspend, + .resume = acard_ahci_pci_device_resume, +#endif +}; + +#ifdef CONFIG_PM +static int acard_ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *mmio = hpriv->mmio; + u32 ctl; + + if (mesg.event & PM_EVENT_SUSPEND && + hpriv->flags & AHCI_HFLAG_NO_SUSPEND) { + dev_printk(KERN_ERR, &pdev->dev, + "BIOS update required for suspend/resume\n"); + return -EIO; + } + + if (mesg.event & PM_EVENT_SLEEP) { + /* AHCI spec rev1.1 section 8.3.3: + * Software must disable interrupts prior to requesting a + * transition of the HBA to D3 state. + */ + ctl = readl(mmio + HOST_CTL); + ctl &= ~HOST_IRQ_EN; + writel(ctl, mmio + HOST_CTL); + readl(mmio + HOST_CTL); /* flush */ + } + + return ata_pci_device_suspend(pdev, mesg); +} + +static int acard_ahci_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + } + + ata_host_resume(host); + + return 0; +} +#endif + +static int acard_ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac) +{ + int rc; + + if (using_dac && + !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) { + rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (rc) { + rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + return 0; +} + +static void acard_ahci_pci_print_info(struct ata_host *host) +{ + struct pci_dev *pdev = to_pci_dev(host->dev); + u16 cc; + const char *scc_s; + + pci_read_config_word(pdev, 0x0a, &cc); + if (cc == PCI_CLASS_STORAGE_IDE) + scc_s = "IDE"; + else if (cc == PCI_CLASS_STORAGE_SATA) + scc_s = "SATA"; + else if (cc == PCI_CLASS_STORAGE_RAID) + scc_s = "RAID"; + else + scc_s = "unknown"; + + ahci_print_info(host, scc_s); +} + +static unsigned int acard_ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) +{ + struct scatterlist *sg; + struct acard_sg *acard_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ; + unsigned int si, last_si = 0; + + VPRINTK("ENTER\n"); + + /* + * Next, the S/G list. + */ + for_each_sg(qc->sg, sg, qc->n_elem, si) { + dma_addr_t addr = sg_dma_address(sg); + u32 sg_len = sg_dma_len(sg); + + /* + * ACard note: + * We must set an end-of-table (EOT) bit, + * and the segment cannot exceed 64k (0x10000) + */ + acard_sg[si].addr = cpu_to_le32(addr & 0xffffffff); + acard_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16); + acard_sg[si].size = cpu_to_le32(sg_len); + last_si = si; + } + + acard_sg[last_si].size |= cpu_to_le32(1 << 31); /* set EOT */ + + return si; +} + +static void acard_ahci_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_port_priv *pp = ap->private_data; + int is_atapi = ata_is_atapi(qc->tf.protocol); + void *cmd_tbl; + u32 opts; + const u32 cmd_fis_len = 5; /* five dwords */ + unsigned int n_elem; + + /* + * Fill in command table information. First, the header, + * a SATA Register - Host to Device command FIS. + */ + cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ; + + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl); + if (is_atapi) { + memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32); + memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len); + } + + n_elem = 0; + if (qc->flags & ATA_QCFLAG_DMAMAP) + n_elem = acard_ahci_fill_sg(qc, cmd_tbl); + + /* + * Fill in command slot information. + * + * ACard note: prd table length not filled in + */ + opts = cmd_fis_len | (qc->dev->link->pmp << 12); + if (qc->tf.flags & ATA_TFLAG_WRITE) + opts |= AHCI_CMD_WRITE; + if (is_atapi) + opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH; + + ahci_fill_cmd_slot(pp, qc->tag, opts); +} + +static bool acard_ahci_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + struct ahci_port_priv *pp = qc->ap->private_data; + u8 *rx_fis = pp->rx_fis; + + if (pp->fbs_enabled) + rx_fis += qc->dev->link->pmp * ACARD_AHCI_RX_FIS_SZ; + + /* + * After a successful execution of an ATA PIO data-in command, + * the device doesn't send D2H Reg FIS to update the TF and + * the host should take TF and E_Status from the preceding PIO + * Setup FIS. + */ + if (qc->tf.protocol == ATA_PROT_PIO && qc->dma_dir == DMA_FROM_DEVICE && + !(qc->flags & ATA_QCFLAG_FAILED)) { + ata_tf_from_fis(rx_fis + RX_FIS_PIO_SETUP, &qc->result_tf); + qc->result_tf.command = (rx_fis + RX_FIS_PIO_SETUP)[15]; + } else + ata_tf_from_fis(rx_fis + RX_FIS_D2H_REG, &qc->result_tf); + + return true; +} + +static int acard_ahci_port_start(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct device *dev = ap->host->dev; + struct ahci_port_priv *pp; + void *mem; + dma_addr_t mem_dma; + size_t dma_sz, rx_fis_sz; + + pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + /* check FBS capability */ + if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) { + void __iomem *port_mmio = ahci_port_base(ap); + u32 cmd = readl(port_mmio + PORT_CMD); + if (cmd & PORT_CMD_FBSCP) + pp->fbs_supported = true; + else if (hpriv->flags & AHCI_HFLAG_YES_FBS) { + dev_printk(KERN_INFO, dev, + "port %d can do FBS, forcing FBSCP\n", + ap->port_no); + pp->fbs_supported = true; + } else + dev_printk(KERN_WARNING, dev, + "port %d is not capable of FBS\n", + ap->port_no); + } + + if (pp->fbs_supported) { + dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ; + rx_fis_sz = ACARD_AHCI_RX_FIS_SZ * 16; + } else { + dma_sz = AHCI_PORT_PRIV_DMA_SZ; + rx_fis_sz = ACARD_AHCI_RX_FIS_SZ; + } + + mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL); + if (!mem) + return -ENOMEM; + memset(mem, 0, dma_sz); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = mem; + pp->cmd_slot_dma = mem_dma; + + mem += AHCI_CMD_SLOT_SZ; + mem_dma += AHCI_CMD_SLOT_SZ; + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = mem; + pp->rx_fis_dma = mem_dma; + + mem += rx_fis_sz; + mem_dma += rx_fis_sz; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = mem; + pp->cmd_tbl_dma = mem_dma; + + /* + * Save off initial list of interrupts to be enabled. + * This could be changed later + */ + pp->intr_mask = DEF_PORT_IRQ; + + ap->private_data = pp; + + /* engage engines, captain */ + return ahci_port_resume(ap); +} + +static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + unsigned int board_id = ent->driver_data; + struct ata_port_info pi = acard_ahci_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct ata_host *host; + int n_ports, i, rc; + + VPRINTK("ENTER\n"); + + WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS); + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + /* acquire resources */ + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + /* AHCI controllers often implement SFF compatible interface. + * Grab all PCI BARs just in case. + */ + rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + + hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + return -ENOMEM; + hpriv->flags |= (unsigned long)pi.private_data; + + if (!(hpriv->flags & AHCI_HFLAG_NO_MSI)) + pci_enable_msi(pdev); + + hpriv->mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR]; + + /* save initial config */ + ahci_save_initial_config(&pdev->dev, hpriv, 0, 0); + + /* prepare host */ + if (hpriv->cap & HOST_CAP_NCQ) + pi.flags |= ATA_FLAG_NCQ; + + if (hpriv->cap & HOST_CAP_PMP) + pi.flags |= ATA_FLAG_PMP; + + ahci_set_em_messages(hpriv, &pi); + + /* CAP.NP sometimes indicate the index of the last enabled + * port, at other times, that of the last possible port, so + * determining the maximum port number requires looking at + * both CAP.NP and port_map. + */ + n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map)); + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + host->private_data = hpriv; + + if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss) + host->flags |= ATA_HOST_PARALLEL_SCAN; + else + printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n"); + + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + + ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar"); + ata_port_pbar_desc(ap, AHCI_PCI_BAR, + 0x100 + ap->port_no * 0x80, "port"); + + /* set initial link pm policy */ + /* + ap->pm_policy = NOT_AVAILABLE; + */ + /* disabled/not-implemented port */ + if (!(hpriv->port_map & (1 << i))) + ap->ops = &ata_dummy_port_ops; + } + + /* initialize adapter */ + rc = acard_ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64); + if (rc) + return rc; + + rc = ahci_reset_controller(host); + if (rc) + return rc; + + ahci_init_controller(host); + acard_ahci_pci_print_info(host); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED, + &acard_ahci_sht); +} + +static int __init acard_ahci_init(void) +{ + return pci_register_driver(&acard_ahci_pci_driver); +} + +static void __exit acard_ahci_exit(void) +{ + pci_unregister_driver(&acard_ahci_pci_driver); +} + +MODULE_AUTHOR("Jeff Garzik"); +MODULE_DESCRIPTION("ACard AHCI SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, acard_ahci_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(acard_ahci_init); +module_exit(acard_ahci_exit); diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h index 329cbbb91284..3e606c34f57b 100644 --- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -311,6 +311,8 @@ extern struct device_attribute *ahci_sdev_attrs[]; extern struct ata_port_operations ahci_ops; +void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, + u32 opts); void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv, unsigned int force_port_map, @@ -326,6 +328,7 @@ int ahci_stop_engine(struct ata_port *ap); void ahci_start_engine(struct ata_port *ap); int ahci_check_ready(struct ata_link *link); int ahci_kick_engine(struct ata_port *ap); +int ahci_port_resume(struct ata_port *ap); void ahci_set_em_messages(struct ahci_host_priv *hpriv, struct ata_port_info *pi); int ahci_reset_em(struct ata_host *host); diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index ebc08d65b3dd..26d452339e98 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -87,10 +87,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class, static void ahci_postreset(struct ata_link *link, unsigned int *class); static void ahci_error_handler(struct ata_port *ap); static void ahci_post_internal_cmd(struct ata_queued_cmd *qc); -static int ahci_port_resume(struct ata_port *ap); static void ahci_dev_config(struct ata_device *dev); -static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, - u32 opts); #ifdef CONFIG_PM static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg); #endif @@ -1133,8 +1130,8 @@ static unsigned int ahci_dev_classify(struct ata_port *ap) return ata_dev_classify(&tf); } -static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, - u32 opts) +void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, + u32 opts) { dma_addr_t cmd_tbl_dma; @@ -1145,6 +1142,7 @@ static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag, pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff); pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16); } +EXPORT_SYMBOL_GPL(ahci_fill_cmd_slot); int ahci_kick_engine(struct ata_port *ap) { @@ -1918,7 +1916,7 @@ static void ahci_pmp_detach(struct ata_port *ap) writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); } -static int ahci_port_resume(struct ata_port *ap) +int ahci_port_resume(struct ata_port *ap) { ahci_power_up(ap); ahci_start_port(ap); @@ -1930,6 +1928,7 @@ static int ahci_port_resume(struct ata_port *ap) return 0; } +EXPORT_SYMBOL_GPL(ahci_port_resume); #ifdef CONFIG_PM static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg) -- cgit v1.2.3 From b27dcfb0670ea7352a67137f4ff7947c2a9f6892 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 17 Nov 2010 22:56:48 -0500 Subject: [libata] avoid needlessly passing around ptr to SCSI completion func It's stored in struct scsi_cmnd->scsi_done, making several 'done' parameters to functions redundant. Signed-off-by: Jeff Garzik --- drivers/ata/libata-scsi.c | 60 ++++++++++++++++--------------------- drivers/scsi/ipr.c | 2 +- drivers/scsi/libsas/sas_scsi_host.c | 3 +- include/linux/libata.h | 6 ++-- 4 files changed, 29 insertions(+), 42 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 66aa4bee80a6..5defc74973d7 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -346,12 +346,11 @@ struct device_attribute *ata_common_sdev_attrs[] = { }; EXPORT_SYMBOL_GPL(ata_common_sdev_attrs); -static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) +static void ata_scsi_invalid_field(struct scsi_cmnd *cmd) { ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ - done(cmd); + cmd->scsi_done(cmd); } /** @@ -719,7 +718,6 @@ EXPORT_SYMBOL_GPL(ata_scsi_ioctl); * ata_scsi_qc_new - acquire new ata_queued_cmd reference * @dev: ATA device to which the new command is attached * @cmd: SCSI command that originated this ATA command - * @done: SCSI command completion function * * Obtain a reference to an unused ata_queued_cmd structure, * which is the basic libata structure representing a single @@ -736,21 +734,20 @@ EXPORT_SYMBOL_GPL(ata_scsi_ioctl); * Command allocated, or %NULL if none available. */ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, - struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) + struct scsi_cmnd *cmd) { struct ata_queued_cmd *qc; qc = ata_qc_new_init(dev); if (qc) { qc->scsicmd = cmd; - qc->scsidone = done; + qc->scsidone = cmd->scsi_done; qc->sg = scsi_sglist(cmd); qc->n_elem = scsi_sg_count(cmd); } else { cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); - done(cmd); + cmd->scsi_done(cmd); } return qc; @@ -1735,7 +1732,6 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * ata_scsi_translate - Translate then issue SCSI command to ATA device * @dev: ATA device to which the command is addressed * @cmd: SCSI command to execute - * @done: SCSI command completion function * @xlat_func: Actor which translates @cmd to an ATA taskfile * * Our ->queuecommand() function has decided that the SCSI @@ -1759,7 +1755,6 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) * needs to be deferred. */ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *), ata_xlat_func_t xlat_func) { struct ata_port *ap = dev->link->ap; @@ -1768,7 +1763,7 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, VPRINTK("ENTER\n"); - qc = ata_scsi_qc_new(dev, cmd, done); + qc = ata_scsi_qc_new(dev, cmd); if (!qc) goto err_mem; @@ -1804,14 +1799,14 @@ static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, early_finish: ata_qc_free(qc); - qc->scsidone(cmd); + cmd->scsi_done(cmd); DPRINTK("EXIT - early finish (good or error)\n"); return 0; err_did: ata_qc_free(qc); cmd->result = (DID_ERROR << 16); - qc->scsidone(cmd); + cmd->scsi_done(cmd); err_mem: DPRINTK("EXIT - internal\n"); return 0; @@ -3116,7 +3111,6 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap, } static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, - void (*done)(struct scsi_cmnd *), struct ata_device *dev) { u8 scsi_op = scmd->cmnd[0]; @@ -3150,9 +3144,9 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, } if (xlat_func) - rc = ata_scsi_translate(dev, scmd, done, xlat_func); + rc = ata_scsi_translate(dev, scmd, xlat_func); else - ata_scsi_simulate(dev, scmd, done); + ata_scsi_simulate(dev, scmd); return rc; @@ -3160,7 +3154,7 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, DPRINTK("bad CDB len=%u, scsi_op=0x%02x, max=%u\n", scmd->cmd_len, scsi_op, dev->cdb_len); scmd->result = DID_ERROR << 16; - done(scmd); + scmd->scsi_done(scmd); return 0; } @@ -3199,7 +3193,7 @@ int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd) dev = ata_scsi_find_dev(ap, scsidev); if (likely(dev)) - rc = __ata_scsi_queuecmd(cmd, cmd->scsi_done, dev); + rc = __ata_scsi_queuecmd(cmd, dev); else { cmd->result = (DID_BAD_TARGET << 16); cmd->scsi_done(cmd); @@ -3214,7 +3208,6 @@ int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd) * ata_scsi_simulate - simulate SCSI command on ATA device * @dev: the target device * @cmd: SCSI command being sent to device. - * @done: SCSI command completion function. * * Interprets and directly executes a select list of SCSI commands * that can be handled internally. @@ -3223,8 +3216,7 @@ int ata_scsi_queuecmd(struct Scsi_Host *shost, struct scsi_cmnd *cmd) * spin_lock_irqsave(host lock) */ -void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) +void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd) { struct ata_scsi_args args; const u8 *scsicmd = cmd->cmnd; @@ -3233,17 +3225,17 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, args.dev = dev; args.id = dev->id; args.cmd = cmd; - args.done = done; + args.done = cmd->scsi_done; switch(scsicmd[0]) { /* TODO: worth improving? */ case FORMAT_UNIT: - ata_scsi_invalid_field(cmd, done); + ata_scsi_invalid_field(cmd); break; case INQUIRY: if (scsicmd[1] & 2) /* is CmdDt set? */ - ata_scsi_invalid_field(cmd, done); + ata_scsi_invalid_field(cmd); else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); else switch (scsicmd[2]) { @@ -3269,7 +3261,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b2); break; default: - ata_scsi_invalid_field(cmd, done); + ata_scsi_invalid_field(cmd); break; } break; @@ -3281,7 +3273,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, case MODE_SELECT: /* unconditionally return */ case MODE_SELECT_10: /* bad-field-in-cdb */ - ata_scsi_invalid_field(cmd, done); + ata_scsi_invalid_field(cmd); break; case READ_CAPACITY: @@ -3292,7 +3284,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); else - ata_scsi_invalid_field(cmd, done); + ata_scsi_invalid_field(cmd); break; case REPORT_LUNS: @@ -3302,7 +3294,7 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, case REQUEST_SENSE: ata_scsi_set_sense(cmd, 0, 0, 0); cmd->result = (DRIVER_SENSE << 24); - done(cmd); + cmd->scsi_done(cmd); break; /* if we reach this, then writeback caching is disabled, @@ -3324,14 +3316,14 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, if ((tmp8 == 0x4) && (!scsicmd[3]) && (!scsicmd[4])) ata_scsi_rbuf_fill(&args, ata_scsiop_noop); else - ata_scsi_invalid_field(cmd, done); + ata_scsi_invalid_field(cmd); break; /* all other commands */ default: ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); /* "Invalid command operation code" */ - done(cmd); + cmd->scsi_done(cmd); break; } } @@ -3858,7 +3850,6 @@ EXPORT_SYMBOL_GPL(ata_sas_slave_configure); /** * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device * @cmd: SCSI command to be sent - * @done: Completion function, called when command is complete * @ap: ATA port to which the command is being sent * * RETURNS: @@ -3866,18 +3857,17 @@ EXPORT_SYMBOL_GPL(ata_sas_slave_configure); * 0 otherwise. */ -int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), - struct ata_port *ap) +int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap) { int rc = 0; ata_scsi_dump_cdb(ap, cmd); if (likely(ata_dev_enabled(ap->link.device))) - rc = __ata_scsi_queuecmd(cmd, done, ap->link.device); + rc = __ata_scsi_queuecmd(cmd, ap->link.device); else { cmd->result = (DID_BAD_TARGET << 16); - done(cmd); + cmd->scsi_done(cmd); } return rc; } diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 5bbaee597e88..2c71927aad64 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -5743,7 +5743,7 @@ static int ipr_queuecommand_lck(struct scsi_cmnd *scsi_cmd, } if (ipr_is_gata(res) && res->sata_port) - return ata_sas_queuecmd(scsi_cmd, done, res->sata_port->ap); + return ata_sas_queuecmd(scsi_cmd, res->sata_port->ap); ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); ioarcb = &ipr_cmd->ioarcb; diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index 29251fabecc6..5815cbeb27a6 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -211,8 +211,7 @@ static int sas_queuecommand_lck(struct scsi_cmnd *cmd, unsigned long flags; spin_lock_irqsave(dev->sata_dev.ap->lock, flags); - res = ata_sas_queuecmd(cmd, scsi_done, - dev->sata_dev.ap); + res = ata_sas_queuecmd(cmd, dev->sata_dev.ap); spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags); goto out; } diff --git a/include/linux/libata.h b/include/linux/libata.h index d947b1231662..c9c5d7ad1a2b 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -996,8 +996,7 @@ extern int ata_sas_port_init(struct ata_port *); extern int ata_sas_port_start(struct ata_port *ap); extern void ata_sas_port_stop(struct ata_port *ap); extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *); -extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), - struct ata_port *ap); +extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap); extern int sata_scr_valid(struct ata_link *link); extern int sata_scr_read(struct ata_link *link, int reg, u32 *val); extern int sata_scr_write(struct ata_link *link, int reg, u32 val); @@ -1040,8 +1039,7 @@ extern unsigned int ata_do_dev_read_id(struct ata_device *dev, struct ata_taskfile *tf, u16 *id); extern void ata_qc_complete(struct ata_queued_cmd *qc); extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active); -extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)); +extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd); extern int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]); -- cgit v1.2.3 From 8e834c2e6d51e053c6bd23fec1d95529f618f760 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 25 Dec 2010 22:44:01 +0300 Subject: pata_hpt{37x|3x2n}: SATA mode filtering The Marvell bridge chips used on HighPoint SATA cards do not seem to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes; these cards are based on HPT372/372A/372N/374 chips (judging from the vendor drivers), so the Linux drivers need to have a mode_filter() method for these chips... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 54 ++++++++++++++++++++++++++++++++-------- drivers/ata/pata_hpt3x2n.c | 61 +++++++++++++++++++++++++++++++++++++--------- 2 files changed, 93 insertions(+), 22 deletions(-) diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 9ae4c0830577..9c62951c3e26 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2010 MontaVista Software, Inc. * * TODO * Look into engine reset on timeout errors. Should not be required. @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.15" +#define DRV_VERSION "0.6.16" struct hpt_clock { u8 xfer_speed; @@ -301,6 +301,22 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask) return mask; } +/** + * hpt372_filter - mode selection filter + * @adev: ATA device + * @mask: mode mask + * + * The Marvell bridge chips used on the HighPoint SATA cards do not seem + * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... + */ +static unsigned long hpt372_filter(struct ata_device *adev, unsigned long mask) +{ + if (ata_id_is_sata(adev->id)) + mask &= ~((0xE << ATA_SHIFT_UDMA) | ATA_MASK_MWDMA); + + return mask; +} + /** * hpt37x_cable_detect - Detect the cable type * @ap: ATA port to detect on @@ -586,11 +602,11 @@ static struct ata_port_operations hpt370a_port_ops = { }; /* - * Configuration for HPT372, HPT371, HPT302. Slightly different PIO - * and DMA mode setting functionality. + * Configuration for HPT371 and HPT302. Slightly different PIO and DMA + * mode setting functionality. */ -static struct ata_port_operations hpt372_port_ops = { +static struct ata_port_operations hpt302_port_ops = { .inherits = &ata_bmdma_port_ops, .bmdma_stop = hpt37x_bmdma_stop, @@ -602,7 +618,17 @@ static struct ata_port_operations hpt372_port_ops = { }; /* - * Configuration for HPT374. Mode setting works like 372 and friends + * Configuration for HPT372. Mode setting works like 371 and 302 + * but we have a mode filter. + */ + +static struct ata_port_operations hpt372_port_ops = { + .inherits = &hpt302_port_ops, + .mode_filter = hpt372_filter, +}; + +/* + * Configuration for HPT374. Mode setting and filtering works like 372 * but we have a different cable detection procedure for function 1. */ @@ -753,7 +779,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA5, .port_ops = &hpt370a_port_ops }; - /* HPT371, 372 and friends - UDMA133 */ + /* HPT372 - UDMA133 */ static const struct ata_port_info info_hpt372 = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, @@ -761,6 +787,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA6, .port_ops = &hpt372_port_ops }; + /* HPT371, 302 - UDMA133 */ + static const struct ata_port_info info_hpt302 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &hpt302_port_ops + }; /* HPT374 - UDMA100, function 1 uses different prereset method */ static const struct ata_port_info info_hpt374_fn0 = { .flags = ATA_FLAG_SLAVE_POSS, @@ -828,7 +862,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) } else { switch(dev->device) { case PCI_DEVICE_ID_TTI_HPT372: - /* 372N if rev >= 2*/ + /* 372N if rev >= 2 */ if (rev >= 2) return -ENODEV; ppi[0] = &info_hpt372; @@ -838,14 +872,14 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* 302N if rev > 1 */ if (rev > 1) return -ENODEV; - ppi[0] = &info_hpt372; + ppi[0] = &info_hpt302; /* Check this */ chip_table = &hpt302; break; case PCI_DEVICE_ID_TTI_HPT371: if (rev > 1) return -ENODEV; - ppi[0] = &info_hpt372; + ppi[0] = &info_hpt302; chip_table = &hpt371; /* Single channel device, master is not present but the BIOS (or us for non x86) must mark it diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 32f3463216b8..97c6ded047b8 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2010 MontaVista Software, Inc. * * * TODO @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.10" +#define DRV_VERSION "0.3.11" enum { HPT_PCI_FAST = (1 << 31), @@ -112,6 +112,22 @@ static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed) return 0xffffffffU; /* silence compiler warning */ } +/** + * hpt372n_filter - mode selection filter + * @adev: ATA device + * @mask: mode mask + * + * The Marvell bridge chips used on the HighPoint SATA cards do not seem + * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes... + */ +static unsigned long hpt372n_filter(struct ata_device *adev, unsigned long mask) +{ + if (ata_id_is_sata(adev->id)) + mask &= ~((0xE << ATA_SHIFT_UDMA) | ATA_MASK_MWDMA); + + return mask; +} + /** * hpt3x2n_cable_detect - Detect the cable type * @ap: ATA port to detect on @@ -328,10 +344,10 @@ static struct scsi_host_template hpt3x2n_sht = { }; /* - * Configuration for HPT3x2n. + * Configuration for HPT302N/371N. */ -static struct ata_port_operations hpt3x2n_port_ops = { +static struct ata_port_operations hpt3xxn_port_ops = { .inherits = &ata_bmdma_port_ops, .bmdma_stop = hpt3x2n_bmdma_stop, @@ -345,6 +361,15 @@ static struct ata_port_operations hpt3x2n_port_ops = { .prereset = hpt3x2n_pre_reset, }; +/* + * Configuration for HPT372N. Same as 302N/371N but we have a mode filter. + */ + +static struct ata_port_operations hpt372n_port_ops = { + .inherits = &hpt3xxn_port_ops, + .mode_filter = &hpt372n_filter, +}; + /** * hpt3xn_calibrate_dpll - Calibrate the DPLL loop * @dev: PCI device @@ -437,15 +462,23 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev) static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - /* HPT372N and friends - UDMA133 */ - static const struct ata_port_info info = { + /* HPT372N - UDMA133 */ + static const struct ata_port_info info_hpt372n = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, .udma_mask = ATA_UDMA6, - .port_ops = &hpt3x2n_port_ops + .port_ops = &hpt372n_port_ops }; - const struct ata_port_info *ppi[] = { &info, NULL }; + /* HPT302N and HPT371N - UDMA133 */ + static const struct ata_port_info info_hpt3xxn = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &hpt3xxn_port_ops + }; + const struct ata_port_info *ppi[] = { &info_hpt3xxn, NULL }; u8 rev = dev->revision; u8 irqmask; unsigned int pci_mhz; @@ -461,24 +494,28 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) switch(dev->device) { case PCI_DEVICE_ID_TTI_HPT366: + /* 372N if rev >= 6 */ if (rev < 6) return -ENODEV; - break; + goto hpt372n; case PCI_DEVICE_ID_TTI_HPT371: + /* 371N if rev >= 2 */ if (rev < 2) return -ENODEV; - /* 371N if rev > 1 */ break; case PCI_DEVICE_ID_TTI_HPT372: - /* 372N if rev >= 2*/ + /* 372N if rev >= 2 */ if (rev < 2) return -ENODEV; - break; + goto hpt372n; case PCI_DEVICE_ID_TTI_HPT302: + /* 302N if rev >= 2 */ if (rev < 2) return -ENODEV; break; case PCI_DEVICE_ID_TTI_HPT372N: +hpt372n: + ppi[0] = &info_hpt372n; break; default: printk(KERN_ERR "pata_hpt3x2n: PCI table is bogus please report (%d).\n", dev->device); -- cgit v1.2.3 From 0ca646db68d1bd7184dfc41362d0dd9d56c0e57e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 28 Dec 2010 21:46:40 +0300 Subject: pata_hpt3x2n: clarify about HPT371N support Commit 28e21c8c0d44cd63bad4c62f94ef0c5a1cb8402c (pata_hpt3x2n: Add HPT371N support and other bits) forgot to update the driver's Kconfig entry, heading comment, and module description (that also wrongly claims support of HPT302) which may confuse users... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 4 ++-- drivers/ata/pata_hpt3x2n.c | 6 ++---- 2 files changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e3e0e95c7aa5..e0c34d73770a 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -408,11 +408,11 @@ config PATA_HPT37X If unsure, say N. config PATA_HPT3X2N - tristate "HPT 372N/302N PATA support" + tristate "HPT 371N/372N/302N PATA support" depends on PCI help This option enables support for the N variant HPT PATA - controllers via the new ATA layer + controllers via the new ATA layer. If unsure, say N. diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 97c6ded047b8..87b735a45935 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -1,5 +1,5 @@ /* - * Libata driver for the highpoint 372N and 302N UDMA66 ATA controllers. + * Libata driver for the HighPoint 371N, 372N, and 302N UDMA66 ATA controllers. * * This driver is heavily based upon: * @@ -456,8 +456,6 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev) * HPT372N 9 (HPT372N) * UDMA133 * * (1) UDMA133 support depends on the bus clock - * - * To pin down HPT371N */ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) @@ -616,7 +614,7 @@ static void __exit hpt3x2n_exit(void) } MODULE_AUTHOR("Alan Cox"); -MODULE_DESCRIPTION("low-level driver for the Highpoint HPT3x2n/30x"); +MODULE_DESCRIPTION("low-level driver for the Highpoint HPT3xxN"); MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, hpt3x2n); MODULE_VERSION(DRV_VERSION); -- cgit v1.2.3 From dfc7e3e37d4a22ed5fd3f6e8c9842cb1246fee4f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 28 Dec 2010 22:54:54 +0300 Subject: pata_hpt3x2n: calculate average f_CNT Allow hpt3x2n_pci_clock() to calculate the average f_CNT register value iff HighPoint BIOS hasn't saved one, just like the 'pata_hpt37x' driver (reading the full 16-bit register, unlike what that driver does), so that this driver would work correctly on e.g. non-x86 machine with 66 MHz PCI. I'm not sure why Alan has only done this in one driver and not the other... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt3x2n.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 87b735a45935..809a4b4e88ab 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.11" +#define DRV_VERSION "0.3.12" enum { HPT_PCI_FAST = (1 << 31), @@ -413,8 +413,19 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev) fcnt = inl(iobase + 0x90); /* Not PCI readable for some chips */ if ((fcnt >> 12) != 0xABCDE) { - printk(KERN_WARNING "hpt3xn: BIOS clock data not set.\n"); - return 33; /* Not BIOS set */ + int i; + u16 sr; + u32 total = 0; + + printk(KERN_WARNING "pata_hpt3x2n: BIOS clock data not set.\n"); + + /* This is the process the HPT371 BIOS is reported to use */ + for (i = 0; i < 128; i++) { + pci_read_config_word(pdev, 0x78, &sr); + total += sr & 0x1FF; + udelay(15); + } + fcnt = total / 128; } fcnt &= 0x1FF; -- cgit v1.2.3 From 28cd4b6b4850d7588f1033c3808314b6bc2150d5 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 28 Dec 2010 23:06:38 +0300 Subject: pata_hpt366: coding style cleanup Fix 2 errors and 11 warnings given by checkpatch.pl: - *switch* and *case* not on the same indentation level; - no space between *switch* and open parenthesis; - drive blacklist arrays not being *const*; - spaces before tabs; - lines over 80 characters. In addition to these changes, also add new line after variable definition in hpt36x_init_chipset()... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt366.c | 51 +++++++++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 22 deletions(-) diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 7688868557b9..d7e57db36bc8 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt366" -#define DRV_VERSION "0.6.8" +#define DRV_VERSION "0.6.9" struct hpt_clock { u8 xfer_mode; @@ -110,18 +110,23 @@ static const struct hpt_clock hpt366_25[] = { { 0, 0x01208585 } }; -static const char *bad_ata33[] = { - "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2", - "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", - "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", +static const char * const bad_ata33[] = { + "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", + "Maxtor 90845U3", "Maxtor 90650U2", + "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", + "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", + "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", + "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", "Maxtor 90510D4", "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", - "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", - "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", + "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", + "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", + "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", + "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", NULL }; -static const char *bad_ata66_4[] = { +static const char * const bad_ata66_4[] = { "IBM-DTLA-307075", "IBM-DTLA-307060", "IBM-DTLA-307045", @@ -140,12 +145,13 @@ static const char *bad_ata66_4[] = { NULL }; -static const char *bad_ata66_3[] = { +static const char * const bad_ata66_3[] = { "WDC AC310200R", NULL }; -static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[]) +static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, + const char * const list[]) { unsigned char model_num[ATA_ID_PROD_LEN + 1]; int i = 0; @@ -288,6 +294,7 @@ static struct ata_port_operations hpt366_port_ops = { static void hpt36x_init_chipset(struct pci_dev *dev) { u8 drive_fast; + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4)); pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78); pci_write_config_byte(dev, PCI_MIN_GNT, 0x08); @@ -349,16 +356,16 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* PCI clocking determines the ATA timing values to use */ /* info_hpt366 is safe against re-entry so we can scribble on it */ - switch((reg1 & 0x700) >> 8) { - case 9: - hpriv = &hpt366_40; - break; - case 5: - hpriv = &hpt366_25; - break; - default: - hpriv = &hpt366_33; - break; + switch ((reg1 & 0x700) >> 8) { + case 9: + hpriv = &hpt366_40; + break; + case 5: + hpriv = &hpt366_25; + break; + default: + hpriv = &hpt366_33; + break; } /* Now kick off ATA set up */ return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, hpriv, 0); @@ -385,9 +392,9 @@ static const struct pci_device_id hpt36x[] = { }; static struct pci_driver hpt36x_pci_driver = { - .name = DRV_NAME, + .name = DRV_NAME, .id_table = hpt36x, - .probe = hpt36x_init_one, + .probe = hpt36x_init_one, .remove = ata_pci_remove_one, #ifdef CONFIG_PM .suspend = ata_pci_device_suspend, -- cgit v1.2.3 From 49bfbd38bfc997e9081beabd758b2bd655d26a9c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 28 Dec 2010 23:09:27 +0300 Subject: pata_hpt37x: coding style cleanup Fix 12 errors and 15 warnings given by checkpatch.pl: - *switch* and *case* not on the same indentation level; - no space between *for*/*switch*/*while* and open parenthesis; - space between an unary operator and its operand; - drive blacklist arrays not being *const*; - spaces before tabs; - lines over 80 characters. In addition to these changes, also do the following: - add new line after variable definitions; - fix the style of some multi-line comments. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 182 +++++++++++++++++++++++++--------------------- 1 file changed, 101 insertions(+), 81 deletions(-) diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 9c62951c3e26..9e2c98449055 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.16" +#define DRV_VERSION "0.6.17" struct hpt_clock { u8 xfer_speed; @@ -210,7 +210,7 @@ static u32 hpt37x_find_mode(struct ata_port *ap, int speed) { struct hpt_clock *clocks = ap->host->private_data; - while(clocks->xfer_speed) { + while (clocks->xfer_speed) { if (clocks->xfer_speed == speed) return clocks->timing; clocks++; @@ -219,7 +219,8 @@ static u32 hpt37x_find_mode(struct ata_port *ap, int speed) return 0xffffffffU; /* silence compiler warning */ } -static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, const char *list[]) +static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, + const char * const list[]) { unsigned char model_num[ATA_ID_PROD_LEN + 1]; int i = 0; @@ -237,18 +238,23 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr, cons return 0; } -static const char *bad_ata33[] = { - "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2", - "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", - "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", +static const char * const bad_ata33[] = { + "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", + "Maxtor 90845U3", "Maxtor 90650U2", + "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", + "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2", + "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", + "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4", "Maxtor 90510D4", "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2", - "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", - "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", + "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", + "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4", + "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", + "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2", NULL }; -static const char *bad_ata100_5[] = { +static const char * const bad_ata100_5[] = { "IBM-DTLA-307075", "IBM-DTLA-307060", "IBM-DTLA-307045", @@ -389,6 +395,7 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline) { 0x50, 1, 0x04, 0x04 }, { 0x54, 1, 0x04, 0x04 } }; + if (!pci_test_config_bits(pdev, &hpt37x_enable_bits[ap->port_no])) return -ENOENT; @@ -673,12 +680,12 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev) u32 reg5c; int tries; - for(tries = 0; tries < 0x5000; tries++) { + for (tries = 0; tries < 0x5000; tries++) { udelay(50); pci_read_config_byte(dev, 0x5b, ®5b); if (reg5b & 0x80) { /* See if it stays set */ - for(tries = 0; tries < 0x1000; tries ++) { + for (tries = 0; tries < 0x1000; tries++) { pci_read_config_byte(dev, 0x5b, ®5b); /* Failed ? */ if ((reg5b & 0x80) == 0) @@ -686,7 +693,7 @@ static int hpt37x_calibrate_dpll(struct pci_dev *dev) } /* Turn off tuning, we have the DPLL set */ pci_read_config_dword(dev, 0x5c, ®5c); - pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100); + pci_write_config_dword(dev, 0x5c, reg5c & ~0x100); return 1; } } @@ -698,6 +705,7 @@ static u32 hpt374_read_freq(struct pci_dev *pdev) { u32 freq; unsigned long io_base = pci_resource_start(pdev, 4); + if (PCI_FUNC(pdev->devfn) & 1) { struct pci_dev *pdev_0; @@ -839,64 +847,68 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (rev == 6) return -ENODEV; - switch(rev) { - case 3: - ppi[0] = &info_hpt370; - chip_table = &hpt370; - prefer_dpll = 0; - break; - case 4: - ppi[0] = &info_hpt370a; - chip_table = &hpt370a; - prefer_dpll = 0; - break; - case 5: - ppi[0] = &info_hpt372; - chip_table = &hpt372; - break; - default: - printk(KERN_ERR "pata_hpt37x: Unknown HPT366 " - "subtype, please report (%d).\n", rev); - return -ENODEV; + switch (rev) { + case 3: + ppi[0] = &info_hpt370; + chip_table = &hpt370; + prefer_dpll = 0; + break; + case 4: + ppi[0] = &info_hpt370a; + chip_table = &hpt370a; + prefer_dpll = 0; + break; + case 5: + ppi[0] = &info_hpt372; + chip_table = &hpt372; + break; + default: + printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, " + "please report (%d).\n", rev); + return -ENODEV; } } else { - switch(dev->device) { - case PCI_DEVICE_ID_TTI_HPT372: - /* 372N if rev >= 2 */ - if (rev >= 2) - return -ENODEV; - ppi[0] = &info_hpt372; - chip_table = &hpt372a; - break; - case PCI_DEVICE_ID_TTI_HPT302: - /* 302N if rev > 1 */ - if (rev > 1) - return -ENODEV; - ppi[0] = &info_hpt302; - /* Check this */ - chip_table = &hpt302; - break; - case PCI_DEVICE_ID_TTI_HPT371: - if (rev > 1) - return -ENODEV; - ppi[0] = &info_hpt302; - chip_table = &hpt371; - /* Single channel device, master is not present - but the BIOS (or us for non x86) must mark it - absent */ - pci_read_config_byte(dev, 0x50, &mcr1); - mcr1 &= ~0x04; - pci_write_config_byte(dev, 0x50, mcr1); - break; - case PCI_DEVICE_ID_TTI_HPT374: - chip_table = &hpt374; - if (!(PCI_FUNC(dev->devfn) & 1)) - *ppi = &info_hpt374_fn0; - else - *ppi = &info_hpt374_fn1; - break; - default: - printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device); + switch (dev->device) { + case PCI_DEVICE_ID_TTI_HPT372: + /* 372N if rev >= 2 */ + if (rev >= 2) + return -ENODEV; + ppi[0] = &info_hpt372; + chip_table = &hpt372a; + break; + case PCI_DEVICE_ID_TTI_HPT302: + /* 302N if rev > 1 */ + if (rev > 1) + return -ENODEV; + ppi[0] = &info_hpt302; + /* Check this */ + chip_table = &hpt302; + break; + case PCI_DEVICE_ID_TTI_HPT371: + if (rev > 1) + return -ENODEV; + ppi[0] = &info_hpt302; + chip_table = &hpt371; + /* + * Single channel device, master is not present + * but the BIOS (or us for non x86) must mark it + * absent + */ + pci_read_config_byte(dev, 0x50, &mcr1); + mcr1 &= ~0x04; + pci_write_config_byte(dev, 0x50, mcr1); + break; + case PCI_DEVICE_ID_TTI_HPT374: + chip_table = &hpt374; + if (!(PCI_FUNC(dev->devfn) & 1)) + *ppi = &info_hpt374_fn0; + else + *ppi = &info_hpt374_fn1; + break; + default: + printk(KERN_ERR + "pata_hpt37x: PCI table is bogus, please report (%d).\n", + dev->device); return -ENODEV; } } @@ -927,9 +939,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (chip_table == &hpt372a) outb(0x0e, iobase + 0x9c); - /* Some devices do not let this value be accessed via PCI space - according to the old driver. In addition we must use the value - from FN 0 on the HPT374 */ + /* + * Some devices do not let this value be accessed via PCI space + * according to the old driver. In addition we must use the value + * from FN 0 on the HPT374. + */ if (chip_table == &hpt374) { freq = hpt374_read_freq(dev); @@ -943,10 +957,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) u8 sr; u32 total = 0; - printk(KERN_WARNING "pata_hpt37x: BIOS has not set timing clocks.\n"); + printk(KERN_WARNING + "pata_hpt37x: BIOS has not set timing clocks.\n"); /* This is the process the HPT371 BIOS is reported to use */ - for(i = 0; i < 128; i++) { + for (i = 0; i < 128; i++) { pci_read_config_byte(dev, 0x78, &sr); total += sr & 0x1FF; udelay(15); @@ -981,17 +996,22 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* Select the DPLL clock. */ pci_write_config_byte(dev, 0x5b, 0x21); - pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100); + pci_write_config_dword(dev, 0x5C, + (f_high << 16) | f_low | 0x100); - for(adjust = 0; adjust < 8; adjust++) { + for (adjust = 0; adjust < 8; adjust++) { if (hpt37x_calibrate_dpll(dev)) break; - /* See if it'll settle at a fractionally different clock */ + /* + * See if it'll settle at a fractionally + * different clock + */ if (adjust & 1) f_low -= adjust >> 1; else f_high += adjust >> 1; - pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low | 0x100); + pci_write_config_dword(dev, 0x5C, + (f_high << 16) | f_low | 0x100); } if (adjust == 8) { printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n"); @@ -1010,7 +1030,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) * Perform a final fixup. Note that we will have used the * DPLL on the HPT372 which means we don't have to worry * about lack of UDMA133 support on lower clocks - */ + */ if (clock_slot < 2 && ppi[0] == &info_hpt370) ppi[0] = &info_hpt370_33; @@ -1035,9 +1055,9 @@ static const struct pci_device_id hpt37x[] = { }; static struct pci_driver hpt37x_pci_driver = { - .name = DRV_NAME, + .name = DRV_NAME, .id_table = hpt37x, - .probe = hpt37x_init_one, + .probe = hpt37x_init_one, .remove = ata_pci_remove_one }; -- cgit v1.2.3 From b197f13b53681c606e59d7d9a8a1d2d54fd363fe Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 28 Dec 2010 23:11:36 +0300 Subject: pata_hpt3x2n: coding style cleanup Fix 8 errors and 3 warnings given by checkpatch.pl: - *switch* and *case* not on the same indentation level; - no space between *for*/*switch*/*while* and open parenthesis; - space between an unary operator and its operand; - spaces before tabs; - lines over 80 characters. In addition to these changes, also do the following: - add new line after variable definitions; - fix the style of some multi-line comments. Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt3x2n.c | 86 +++++++++++++++++++++++++--------------------- 1 file changed, 47 insertions(+), 39 deletions(-) diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 809a4b4e88ab..d2239bbdb798 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_hpt3x2n" -#define DRV_VERSION "0.3.12" +#define DRV_VERSION "0.3.13" enum { HPT_PCI_FAST = (1 << 31), @@ -103,7 +103,7 @@ static u32 hpt3x2n_find_mode(struct ata_port *ap, int speed) { struct hpt_clock *clocks = hpt3x2n_clocks; - while(clocks->xfer_speed) { + while (clocks->xfer_speed) { if (clocks->xfer_speed == speed) return clocks->timing; clocks++; @@ -169,6 +169,7 @@ static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline) { struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); + /* Reset the state machine */ pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); @@ -384,12 +385,12 @@ static int hpt3xn_calibrate_dpll(struct pci_dev *dev) u32 reg5c; int tries; - for(tries = 0; tries < 0x5000; tries++) { + for (tries = 0; tries < 0x5000; tries++) { udelay(50); pci_read_config_byte(dev, 0x5b, ®5b); if (reg5b & 0x80) { /* See if it stays set */ - for(tries = 0; tries < 0x1000; tries ++) { + for (tries = 0; tries < 0x1000; tries++) { pci_read_config_byte(dev, 0x5b, ®5b); /* Failed ? */ if ((reg5b & 0x80) == 0) @@ -397,7 +398,7 @@ static int hpt3xn_calibrate_dpll(struct pci_dev *dev) } /* Turn off tuning, we have the DPLL set */ pci_read_config_dword(dev, 0x5c, ®5c); - pci_write_config_dword(dev, 0x5c, reg5c & ~ 0x100); + pci_write_config_dword(dev, 0x5c, reg5c & ~0x100); return 1; } } @@ -501,34 +502,36 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) if (rc) return rc; - switch(dev->device) { - case PCI_DEVICE_ID_TTI_HPT366: - /* 372N if rev >= 6 */ - if (rev < 6) - return -ENODEV; - goto hpt372n; - case PCI_DEVICE_ID_TTI_HPT371: - /* 371N if rev >= 2 */ - if (rev < 2) - return -ENODEV; - break; - case PCI_DEVICE_ID_TTI_HPT372: - /* 372N if rev >= 2 */ - if (rev < 2) - return -ENODEV; - goto hpt372n; - case PCI_DEVICE_ID_TTI_HPT302: - /* 302N if rev >= 2 */ - if (rev < 2) - return -ENODEV; - break; - case PCI_DEVICE_ID_TTI_HPT372N: -hpt372n: - ppi[0] = &info_hpt372n; - break; - default: - printk(KERN_ERR "pata_hpt3x2n: PCI table is bogus please report (%d).\n", dev->device); + switch (dev->device) { + case PCI_DEVICE_ID_TTI_HPT366: + /* 372N if rev >= 6 */ + if (rev < 6) + return -ENODEV; + goto hpt372n; + case PCI_DEVICE_ID_TTI_HPT371: + /* 371N if rev >= 2 */ + if (rev < 2) + return -ENODEV; + break; + case PCI_DEVICE_ID_TTI_HPT372: + /* 372N if rev >= 2 */ + if (rev < 2) + return -ENODEV; + goto hpt372n; + case PCI_DEVICE_ID_TTI_HPT302: + /* 302N if rev >= 2 */ + if (rev < 2) return -ENODEV; + break; + case PCI_DEVICE_ID_TTI_HPT372N: +hpt372n: + ppi[0] = &info_hpt372n; + break; + default: + printk(KERN_ERR + "pata_hpt3x2n: PCI table is bogus please report (%d).\n", + dev->device); + return -ENODEV; } /* Ok so this is a chip we support */ @@ -555,8 +558,10 @@ hpt372n: pci_write_config_byte(dev, 0x50, mcr1); } - /* Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or - 50 for UDMA100. Right now we always use 66 */ + /* + * Tune the PLL. HPT recommend using 75 for SATA, 66 for UDMA133 or + * 50 for UDMA100. Right now we always use 66 + */ pci_mhz = hpt3x2n_pci_clock(dev); @@ -568,7 +573,7 @@ hpt372n: pci_write_config_byte(dev, 0x5B, 0x21); /* Unlike the 37x we don't try jiggling the frequency */ - for(adjust = 0; adjust < 8; adjust++) { + for (adjust = 0; adjust < 8; adjust++) { if (hpt3xn_calibrate_dpll(dev)) break; pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low); @@ -580,8 +585,11 @@ hpt372n: printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz); - /* Set our private data up. We only need a few flags so we use - it directly */ + + /* + * Set our private data up. We only need a few flags + * so we use it directly. + */ if (pci_mhz > 60) hpriv = (void *)(PCI66 | USE_DPLL); @@ -608,9 +616,9 @@ static const struct pci_device_id hpt3x2n[] = { }; static struct pci_driver hpt3x2n_pci_driver = { - .name = DRV_NAME, + .name = DRV_NAME, .id_table = hpt3x2n, - .probe = hpt3x2n_init_one, + .probe = hpt3x2n_init_one, .remove = ata_pci_remove_one }; -- cgit v1.2.3 From fc2698d5ec7e96ba2c94a942329cfa4c5d6085f7 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 5 Jan 2011 21:59:49 +0300 Subject: pata_hpt37x: actually limit HPT370 to UltraDMA/66 The driver clearly tries to limit HPT370[A] to UltraDMA/66 if the PCI clock is less than 50 MHz but due to cut&paste type mistake this code has no effect... Signed-off-by: Sergei Shtylyov Signed-off-by: Jeff Garzik --- drivers/ata/pata_hpt37x.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 9e2c98449055..efdd18bc8663 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -24,7 +24,7 @@ #include #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.17" +#define DRV_VERSION "0.6.18" struct hpt_clock { u8 xfer_speed; @@ -771,20 +771,20 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA5, .port_ops = &hpt370a_port_ops }; - /* HPT370 - UDMA100 */ + /* HPT370 - UDMA66 */ static const struct ata_port_info info_hpt370_33 = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, + .udma_mask = ATA_UDMA4, .port_ops = &hpt370_port_ops }; - /* HPT370A - UDMA100 */ + /* HPT370A - UDMA66 */ static const struct ata_port_info info_hpt370a_33 = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = ATA_PIO4, .mwdma_mask = ATA_MWDMA2, - .udma_mask = ATA_UDMA5, + .udma_mask = ATA_UDMA4, .port_ops = &hpt370a_port_ops }; /* HPT372 - UDMA133 */ -- cgit v1.2.3 From 2ad2c320a107aceeba984f97ab2a60064101f5d5 Mon Sep 17 00:00:00 2001 From: Nick Bowler Date: Fri, 7 Jan 2011 21:32:02 -0500 Subject: pata_platform: Remove CONFIG_HAVE_PATA_PLATFORM's dependencies. CONFIG_HAVE_PATA_PLATFORM, by virtue of where its defined, has a dependency on CONFG_ATA and CONFIG_ATA_SFF. This causes Kconfig warnings when it is selected by various architectures, such as warning: (ARCH_VEXPRESS && || ARCH_RPC && || MACH_VPAC270 && ARCH_PXA || MACH_REALVIEW_PB11MP && ARCH_REALVIEW || MACH_REALVIEW_PBA8 && ARCH_REALVIEW || MACH_REALVIEW_PBX && ARCH_REALVIEW || MACH_BAST_IDE && ARCH_S3C2410 || MACH_ANUBIS && ARCH_S3C2410) selects HAVE_PATA_PLATFORM which has unmet direct dependencies (ATA && ATA_SFF) Since this option is only used to control visibility of the CONFIG_PATA_PLATFORM option and isn't itself visible in the menu, it is straightforward to simply remove these dependencies rather than adjust all the architectures. Signed-off-by: Nick Bowler Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index e0c34d73770a..c6b298d4c136 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -2,6 +2,14 @@ # SATA/PATA driver configuration # +config HAVE_PATA_PLATFORM + bool + help + This is an internal configuration node for any machine that + uses pata-platform driver to enable the relevant driver in the + configuration structure without having to submit endless patches + to update the PATA_PLATFORM entry. + menuconfig ATA tristate "Serial ATA and Parallel ATA drivers" depends on HAS_IOMEM @@ -773,14 +781,6 @@ config PATA_PCMCIA If unsure, say N. -config HAVE_PATA_PLATFORM - bool - help - This is an internal configuration node for any machine that - uses pata-platform driver to enable the relevant driver in the - configuration structure without having to submit endless patches - to update the PATA_PLATFORM entry. - config PATA_PLATFORM tristate "Generic platform device PATA support" depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM -- cgit v1.2.3