From 1ddff7da0faecffdcdeab3d981fb8241453cea44 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Mon, 19 Aug 2013 15:39:19 +0400 Subject: can: mcp251x: Replace power callbacks with regulator API This patch replaces power callbacks to the regulator API. To improve the readability of the code, helper for the regulator enable/disable was added. Acked-by: Haojian Zhuang Signed-off-by: Alexander Shiyan Signed-off-by: Marc Kleine-Budde --- arch/arm/mach-pxa/icontrol.c | 3 -- arch/arm/mach-pxa/zeus.c | 46 +++++++++++--------- drivers/net/can/mcp251x.c | 83 +++++++++++++++++++----------------- include/linux/can/platform/mcp251x.h | 13 +----- 4 files changed, 69 insertions(+), 76 deletions(-) diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index fe31bfcbb8df..c98511c5abd1 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -73,9 +73,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = { static struct mcp251x_platform_data mcp251x_info = { .oscillator_frequency = 16E6, - .board_specific_setup = NULL, - .power_enable = NULL, - .transceiver_enable = NULL }; static struct spi_board_info mcp251x_board_info[] = { diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index f5d436434566..04a0aea23873 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -29,6 +29,8 @@ #include #include #include +#include +#include #include #include @@ -391,33 +393,34 @@ static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = { }; /* CAN bus on SPI */ -static int zeus_mcp2515_setup(struct spi_device *sdev) -{ - int err; - - err = gpio_request(ZEUS_CAN_SHDN_GPIO, "CAN shutdown"); - if (err) - return err; +static struct regulator_consumer_supply can_regulator_consumer = + REGULATOR_SUPPLY("vdd", "spi3.0"); - err = gpio_direction_output(ZEUS_CAN_SHDN_GPIO, 1); - if (err) { - gpio_free(ZEUS_CAN_SHDN_GPIO); - return err; - } +static struct regulator_init_data can_regulator_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &can_regulator_consumer, + .num_consumer_supplies = 1, +}; - return 0; -} +static struct fixed_voltage_config can_regulator_pdata = { + .supply_name = "CAN_SHDN", + .microvolts = 3300000, + .gpio = ZEUS_CAN_SHDN_GPIO, + .init_data = &can_regulator_init_data, +}; -static int zeus_mcp2515_transceiver_enable(int enable) -{ - gpio_set_value(ZEUS_CAN_SHDN_GPIO, !enable); - return 0; -} +static struct platform_device can_regulator_device = { + .name = "reg-fixed-volage", + .id = -1, + .dev = { + .platform_data = &can_regulator_pdata, + }, +}; static struct mcp251x_platform_data zeus_mcp2515_pdata = { .oscillator_frequency = 16*1000*1000, - .board_specific_setup = zeus_mcp2515_setup, - .power_enable = zeus_mcp2515_transceiver_enable, }; static struct spi_board_info zeus_spi_board_info[] = { @@ -516,6 +519,7 @@ static struct platform_device *zeus_devices[] __initdata = { &zeus_leds_device, &zeus_pcmcia_device, &zeus_max6369_device, + &can_regulator_device, }; /* AC'97 */ diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c index 8cda23bf0614..d2c54888b211 100644 --- a/drivers/net/can/mcp251x.c +++ b/drivers/net/can/mcp251x.c @@ -37,9 +37,6 @@ * * static struct mcp251x_platform_data mcp251x_info = { * .oscillator_frequency = 8000000, - * .board_specific_setup = &mcp251x_setup, - * .power_enable = mcp251x_power_enable, - * .transceiver_enable = NULL, * }; * * static struct spi_board_info spi_board_info[] = { @@ -76,6 +73,7 @@ #include #include #include +#include /* SPI interface instruction set */ #define INSTRUCTION_WRITE 0x02 @@ -264,6 +262,8 @@ struct mcp251x_priv { #define AFTER_SUSPEND_POWER 4 #define AFTER_SUSPEND_RESTART 8 int restart_tx; + struct regulator *power; + struct regulator *transceiver; }; #define MCP251X_IS(_model) \ @@ -667,16 +667,25 @@ static int mcp251x_hw_probe(struct spi_device *spi) return (st1 == 0x80 && st2 == 0x07) ? 1 : 0; } +static int mcp251x_power_enable(struct regulator *reg, int enable) +{ + if (IS_ERR(reg)) + return 0; + + if (enable) + return regulator_enable(reg); + else + return regulator_disable(reg); +} + static void mcp251x_open_clean(struct net_device *net) { struct mcp251x_priv *priv = netdev_priv(net); struct spi_device *spi = priv->spi; - struct mcp251x_platform_data *pdata = spi->dev.platform_data; free_irq(spi->irq, priv); mcp251x_hw_sleep(spi); - if (pdata->transceiver_enable) - pdata->transceiver_enable(0); + mcp251x_power_enable(priv->transceiver, 0); close_candev(net); } @@ -684,7 +693,6 @@ static int mcp251x_stop(struct net_device *net) { struct mcp251x_priv *priv = netdev_priv(net); struct spi_device *spi = priv->spi; - struct mcp251x_platform_data *pdata = spi->dev.platform_data; close_candev(net); @@ -704,8 +712,7 @@ static int mcp251x_stop(struct net_device *net) mcp251x_hw_sleep(spi); - if (pdata->transceiver_enable) - pdata->transceiver_enable(0); + mcp251x_power_enable(priv->transceiver, 0); priv->can.state = CAN_STATE_STOPPED; @@ -939,8 +946,7 @@ static int mcp251x_open(struct net_device *net) } mutex_lock(&priv->mcp_lock); - if (pdata->transceiver_enable) - pdata->transceiver_enable(1); + mcp251x_power_enable(priv->transceiver, 1); priv->force_quit = 0; priv->tx_skb = NULL; @@ -956,8 +962,7 @@ static int mcp251x_open(struct net_device *net) flags, DEVICE_NAME, priv); if (ret) { dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq); - if (pdata->transceiver_enable) - pdata->transceiver_enable(0); + mcp251x_power_enable(priv->transceiver, 0); close_candev(net); goto open_unlock; } @@ -1026,6 +1031,19 @@ static int mcp251x_can_probe(struct spi_device *spi) CAN_CTRLMODE_LOOPBACK | CAN_CTRLMODE_LISTENONLY; priv->model = spi_get_device_id(spi)->driver_data; priv->net = net; + + priv->power = devm_regulator_get(&spi->dev, "vdd"); + priv->transceiver = devm_regulator_get(&spi->dev, "xceiver"); + if ((PTR_ERR(priv->power) == -EPROBE_DEFER) || + (PTR_ERR(priv->transceiver) == -EPROBE_DEFER)) { + ret = -EPROBE_DEFER; + goto error_power; + } + + ret = mcp251x_power_enable(priv->power, 1); + if (ret) + goto error_power; + spi_set_drvdata(spi, priv); priv->spi = spi; @@ -1068,13 +1086,6 @@ static int mcp251x_can_probe(struct spi_device *spi) } } - if (pdata->power_enable) - pdata->power_enable(1); - - /* Call out to platform specific setup */ - if (pdata->board_specific_setup) - pdata->board_specific_setup(spi); - SET_NETDEV_DEV(net, &spi->dev); /* Configure the SPI bus */ @@ -1084,14 +1095,11 @@ static int mcp251x_can_probe(struct spi_device *spi) /* Here is OK to not lock the MCP, no one knows about it yet */ if (!mcp251x_hw_probe(spi)) { - dev_info(&spi->dev, "Probe failed\n"); + ret = -ENODEV; goto error_probe; } mcp251x_hw_sleep(spi); - if (pdata->transceiver_enable) - pdata->transceiver_enable(0); - ret = register_candev(net); if (ret) goto error_probe; @@ -1109,13 +1117,13 @@ error_rx_buf: if (!mcp251x_enable_dma) kfree(priv->spi_tx_buf); error_tx_buf: - free_candev(net); if (mcp251x_enable_dma) dma_free_coherent(&spi->dev, PAGE_SIZE, priv->spi_tx_buf, priv->spi_tx_dma); + mcp251x_power_enable(priv->power, 0); +error_power: + free_candev(net); error_alloc: - if (pdata->power_enable) - pdata->power_enable(0); dev_err(&spi->dev, "probe failed\n"); error_out: return ret; @@ -1123,12 +1131,10 @@ error_out: static int mcp251x_can_remove(struct spi_device *spi) { - struct mcp251x_platform_data *pdata = spi->dev.platform_data; struct mcp251x_priv *priv = spi_get_drvdata(spi); struct net_device *net = priv->net; unregister_candev(net); - free_candev(net); if (mcp251x_enable_dma) { dma_free_coherent(&spi->dev, PAGE_SIZE, @@ -1138,8 +1144,9 @@ static int mcp251x_can_remove(struct spi_device *spi) kfree(priv->spi_rx_buf); } - if (pdata->power_enable) - pdata->power_enable(0); + mcp251x_power_enable(priv->power, 0); + + free_candev(net); return 0; } @@ -1149,7 +1156,6 @@ static int mcp251x_can_remove(struct spi_device *spi) static int mcp251x_can_suspend(struct device *dev) { struct spi_device *spi = to_spi_device(dev); - struct mcp251x_platform_data *pdata = spi->dev.platform_data; struct mcp251x_priv *priv = spi_get_drvdata(spi); struct net_device *net = priv->net; @@ -1163,15 +1169,14 @@ static int mcp251x_can_suspend(struct device *dev) netif_device_detach(net); mcp251x_hw_sleep(spi); - if (pdata->transceiver_enable) - pdata->transceiver_enable(0); + mcp251x_power_enable(priv->transceiver, 0); priv->after_suspend = AFTER_SUSPEND_UP; } else { priv->after_suspend = AFTER_SUSPEND_DOWN; } - if (pdata->power_enable) { - pdata->power_enable(0); + if (!IS_ERR(priv->power)) { + regulator_disable(priv->power); priv->after_suspend |= AFTER_SUSPEND_POWER; } @@ -1181,16 +1186,14 @@ static int mcp251x_can_suspend(struct device *dev) static int mcp251x_can_resume(struct device *dev) { struct spi_device *spi = to_spi_device(dev); - struct mcp251x_platform_data *pdata = spi->dev.platform_data; struct mcp251x_priv *priv = spi_get_drvdata(spi); if (priv->after_suspend & AFTER_SUSPEND_POWER) { - pdata->power_enable(1); + mcp251x_power_enable(priv->power, 1); queue_work(priv->wq, &priv->restart_work); } else { if (priv->after_suspend & AFTER_SUSPEND_UP) { - if (pdata->transceiver_enable) - pdata->transceiver_enable(1); + mcp251x_power_enable(priv->transceiver, 1); queue_work(priv->wq, &priv->restart_work); } else { priv->after_suspend = 0; diff --git a/include/linux/can/platform/mcp251x.h b/include/linux/can/platform/mcp251x.h index 089fe43211a4..8a2725676d8b 100644 --- a/include/linux/can/platform/mcp251x.h +++ b/include/linux/can/platform/mcp251x.h @@ -9,26 +9,15 @@ #include -/** +/* * struct mcp251x_platform_data - MCP251X SPI CAN controller platform data * @oscillator_frequency: - oscillator frequency in Hz * @irq_flags: - IRQF configuration flags - * @board_specific_setup: - called before probing the chip (power,reset) - * @transceiver_enable: - called to power on/off the transceiver - * @power_enable: - called to power on/off the mcp *and* the - * transceiver - * - * Please note that you should define power_enable or transceiver_enable or - * none of them. Defining both of them is no use. - * */ struct mcp251x_platform_data { unsigned long oscillator_frequency; unsigned long irq_flags; - int (*board_specific_setup)(struct spi_device *spi); - int (*transceiver_enable)(int enable); - int (*power_enable) (int enable); }; #endif /* __CAN_PLATFORM_MCP251X_H__ */ -- cgit v1.2.3