From b560d414239232c6ed7205d3795d3f588034d69b Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Fri, 10 Apr 2026 09:09:35 +0200 Subject: pinctrl: mediatek: moore: implement gpio_chip::get_direction() If the gpio_chip::get_direction() callback is not implemented by the GPIO controller driver, GPIOLIB emits a warning. Implement get_direction() for the GPIO part of pinctrl-moore. Fixes: 471e998c0e31 ("gpiolib: remove redundant callback check") Fixes: e623c4303ed1 ("gpiolib: sanitize the return value of gpio_chip::get_direction()") Reported-by: Frank Wunderlich Closes: https://lore.kernel.org/all/20260409132724.126258-1-linux@fw-web.de/ Signed-off-by: Bartosz Golaszewski Tested-By: Frank Wunderlich Signed-off-by: Linus Walleij --- drivers/pinctrl/mediatek/pinctrl-moore.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/pinctrl/mediatek/pinctrl-moore.c b/drivers/pinctrl/mediatek/pinctrl-moore.c index 70f608347a5f..071ba849e532 100644 --- a/drivers/pinctrl/mediatek/pinctrl-moore.c +++ b/drivers/pinctrl/mediatek/pinctrl-moore.c @@ -520,6 +520,23 @@ static int mtk_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio, return pinctrl_gpio_direction_output(chip, gpio); } +static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + struct mtk_pinctrl *hw = gpiochip_get_data(chip); + const struct mtk_pin_desc *desc; + int ret, dir; + + desc = (const struct mtk_pin_desc *)&hw->soc->pins[offset]; + if (!desc->name) + return -ENOTSUPP; + + ret = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &dir); + if (ret) + return ret; + + return dir ? GPIO_LINE_DIRECTION_OUT : GPIO_LINE_DIRECTION_IN; +} + static int mtk_gpio_to_irq(struct gpio_chip *chip, unsigned int offset) { struct mtk_pinctrl *hw = gpiochip_get_data(chip); @@ -566,6 +583,7 @@ static int mtk_build_gpiochip(struct mtk_pinctrl *hw) chip->parent = hw->dev; chip->request = gpiochip_generic_request; chip->free = gpiochip_generic_free; + chip->get_direction = mtk_gpio_get_direction; chip->direction_input = pinctrl_gpio_direction_input; chip->direction_output = mtk_gpio_direction_output; chip->get = mtk_gpio_get; -- cgit v1.2.3 From b51d33ea8a164bb5f0eec8ad817fa9730ac2b577 Mon Sep 17 00:00:00 2001 From: Til Kaiser Date: Mon, 13 Apr 2026 15:52:34 +0200 Subject: pinctrl: qcom: ipq4019: mark gpio as a GPIO pin function The qcom pinctrl core supports marking functions that represent GPIO mode via PINCTRL_GPIO_PINFUNCTION(), so that strict pinmuxing does not reject GPIO requests for pins that are muxed to the GPIO function. ipq4019 still describes its gpio function with QCA_PIN_FUNCTION(gpio), so it is not treated as a GPIO pin function. As a result, GPIO consumers can still conflict with pinctrl states that select the "gpio" function. Add a QCA_GPIO_PIN_FUNCTION() helper and use it for the ipq4019 gpio function, matching how the msm-based qcom drivers handle this. This allows ipq4019 to keep the GPIO-related pin configuration in DTS without tripping over strict pinmux ownership checks. Fixes: cc85cb96e2e4 ("pinctrl: qcom: make the pinmuxing strict") Signed-off-by: Til Kaiser Reviewed-by: Dmitry Baryshkov Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-ipq4019.c | 2 +- drivers/pinctrl/qcom/pinctrl-msm.h | 5 +++++ 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/qcom/pinctrl-ipq4019.c b/drivers/pinctrl/qcom/pinctrl-ipq4019.c index c5f0decc3eb3..05fdd73b951e 100644 --- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c +++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c @@ -479,7 +479,7 @@ static const struct pinfunction ipq4019_functions[] = { QCA_PIN_FUNCTION(blsp_uart0), QCA_PIN_FUNCTION(blsp_uart1), QCA_PIN_FUNCTION(chip_rst), - QCA_PIN_FUNCTION(gpio), + QCA_GPIO_PIN_FUNCTION(gpio), QCA_PIN_FUNCTION(i2s_rx), QCA_PIN_FUNCTION(i2s_spdif_in), QCA_PIN_FUNCTION(i2s_spdif_out), diff --git a/drivers/pinctrl/qcom/pinctrl-msm.h b/drivers/pinctrl/qcom/pinctrl-msm.h index a4af279f748a..4fbff61de6bb 100644 --- a/drivers/pinctrl/qcom/pinctrl-msm.h +++ b/drivers/pinctrl/qcom/pinctrl-msm.h @@ -39,6 +39,11 @@ struct pinctrl_pin_desc; fname##_groups, \ ARRAY_SIZE(fname##_groups)) +#define QCA_GPIO_PIN_FUNCTION(fname) \ + [qca_mux_##fname] = PINCTRL_GPIO_PINFUNCTION(#fname, \ + fname##_groups, \ + ARRAY_SIZE(fname##_groups)) + /** * struct msm_pingroup - Qualcomm pingroup definition * @grp: Generic data of the pin group (name and pins) -- cgit v1.2.3 From 86637727c11a105499e9faa38f3422dfcf4d211d Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 6 Jan 2026 18:09:51 +0100 Subject: arm64: dts: renesas: r8a78000: Fix SCIF brg_int clocks MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to the documentation, the internal clock input for the BRG is SGASYNCD4_PERW_BUSφ. Fixes: c13a643e2c491f5b ("arm64: dts: renesas: Add R8A78000 SoC support") Signed-off-by: Geert Uytterhoeven Link: https://patch.msgid.link/459d360a8332f92b3766b30814e7e1c76169aaf7.1767719254.git.geert+renesas@glider.be --- arch/arm64/boot/dts/renesas/r8a78000.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a78000.dtsi b/arch/arm64/boot/dts/renesas/r8a78000.dtsi index 3e1c98903cea..3ec1b53d2782 100644 --- a/arch/arm64/boot/dts/renesas/r8a78000.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a78000.dtsi @@ -699,7 +699,7 @@ "renesas,rcar-gen5-scif", "renesas,scif"; reg = <0 0xc0700000 0 0x40>; interrupts = ; - clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>; + clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd4>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; status = "disabled"; }; @@ -709,7 +709,7 @@ "renesas,rcar-gen5-scif", "renesas,scif"; reg = <0 0xc0704000 0 0x40>; interrupts = ; - clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>; + clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd4>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; status = "disabled"; }; @@ -719,7 +719,7 @@ "renesas,rcar-gen5-scif", "renesas,scif"; reg = <0 0xc0708000 0 0x40>; interrupts = ; - clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>; + clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd4>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; status = "disabled"; }; @@ -729,7 +729,7 @@ "renesas,rcar-gen5-scif", "renesas,scif"; reg = <0 0xc070c000 0 0x40>; interrupts = ; - clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd16>, <&scif_clk>; + clocks = <&dummy_clk_sgasyncd16>, <&dummy_clk_sgasyncd4>, <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; status = "disabled"; }; -- cgit v1.2.3 From d289b5f56ab7fe939dc5bfc87c856b46fe5def38 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 26 Mar 2026 05:23:58 +0100 Subject: arm64: dts: renesas: draak/ebisu-panel: Fix missing cells and reg in DTO Add missing cells and reg DT property in the Draak/Ebisu panel DTO to fix the following DTC W=1 warning: arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso:30.10-34.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@1: node has a unit name, but no reg or ranges property Signed-off-by: Marek Vasut Reviewed-by: Laurent Pinchart Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260326042411.215241-2-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso index 258f8668ca36..90767d74e21b 100644 --- a/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso +++ b/arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso @@ -27,7 +27,12 @@ status = "okay"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + lvds1_out: endpoint { remote-endpoint = <&panel_in>; }; -- cgit v1.2.3 From 2016dde0685a091002851df8005757150a0e9350 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 26 Mar 2026 05:23:59 +0100 Subject: arm64: dts: renesas: salvator-panel: Fix missing cells and reg in DTO Add missing cells and reg DT property in the Salvator-X panel DTO to fix the following DTC W=1 warning: arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso:30.10-34.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@1: node has a unit name, but no reg or ranges property Signed-off-by: Marek Vasut Reviewed-by: Laurent Pinchart Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260326042411.215241-3-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso index c83a30adc6ad..7807c3f80409 100644 --- a/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso +++ b/arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso @@ -27,7 +27,12 @@ status = "okay"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + lvds0_out: endpoint { remote-endpoint = <&panel_in>; }; -- cgit v1.2.3 From 25b113f187bf07f8caa3f40a96e7ec6de850767e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 26 Mar 2026 05:24:00 +0100 Subject: arm64: dts: renesas: rz-smarc-cru-csi-ov5645: Fix missing cells and reg in CSI2 subnode Add missing cells and reg DT property in the CSI2 subnode to fix the following DTC W=1 warning: arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi:49.10-55.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@0: node has a unit name, but no reg or ranges property Signed-off-by: Marek Vasut Reviewed-by: Geert Uytterhoeven Reviewed-by: Laurent Pinchart Link: https://patch.msgid.link/20260326042411.215241-4-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi index 4d2b0655859a..3feffa4f16a9 100644 --- a/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi +++ b/arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi @@ -46,7 +46,12 @@ status = "okay"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + csi2_in: endpoint { clock-lanes = <0>; data-lanes = <1 2>; -- cgit v1.2.3 From ca743e8ac2b41c295d5ee12ed231fccb52161a0b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Thu, 26 Mar 2026 05:24:01 +0100 Subject: arm64: dts: renesas: rz-smarc-du-adv7513-smarc: Fix missing cells and reg in DU subnode Add missing cells and reg DT property in the DU subnode to fix the following DTC W=1 warning: arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi:29.10-33.5: Warning (unit_address_vs_reg): /fragment@1/__overlay__/ports/port@0: node has a unit name, but no reg or ranges property Signed-off-by: Marek Vasut Reviewed-by: Laurent Pinchart Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260326042411.215241-5-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi b/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi index 36707576030d..f5412578ee65 100644 --- a/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi +++ b/arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi @@ -26,7 +26,12 @@ status = "okay"; ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + du_out_rgb: endpoint { remote-endpoint = <&adv7513_in>; }; -- cgit v1.2.3 From 1ca2d1af3826a6de6fd300f9b122d10d21a64266 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 28 Mar 2026 00:42:06 +0100 Subject: ARM: dts: renesas: r8a7778: Add missing unit address to bus node Add missing unit address to bus node to fix the following DTC W=1 warning: arch/arm/boot/dts/renesas/r8a7778.dtsi:43.12-48.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name Signed-off-by: Marek Vasut Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260327234244.91707-2-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/renesas/r8a7778.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/renesas/r8a7778.dtsi b/arch/arm/boot/dts/renesas/r8a7778.dtsi index 859dd29dfce3..7db456b19795 100644 --- a/arch/arm/boot/dts/renesas/r8a7778.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7778.dtsi @@ -40,7 +40,7 @@ spi2 = &hspi2; }; - lbsc: bus { + lbsc: bus@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From fd62c046cdc8fb8b1b3e358e791317b70bbc1269 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 28 Mar 2026 00:42:07 +0100 Subject: ARM: dts: renesas: r8a7779: Add missing unit address to bus node Add missing unit address to bus node to fix the following DTC W=1 warning: arch/arm/boot/dts/renesas/r8a7779.dtsi:707.12-712.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name Signed-off-by: Marek Vasut Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260327234244.91707-3-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/renesas/r8a7779.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/renesas/r8a7779.dtsi b/arch/arm/boot/dts/renesas/r8a7779.dtsi index e437c22f452d..9e8a7e190c89 100644 --- a/arch/arm/boot/dts/renesas/r8a7779.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7779.dtsi @@ -704,7 +704,7 @@ }; }; - lbsc: bus { + lbsc: bus@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 78c459d057e970401f59781c73e1523bc1dec51f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 28 Mar 2026 00:42:08 +0100 Subject: ARM: dts: renesas: r8a7792: Add missing unit address to bus node Add missing unit address to bus node to fix the following DTC W=1 warning: arch/arm/boot/dts/renesas/r8a7792.dtsi:89.12-94.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name Signed-off-by: Marek Vasut Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260327234244.91707-4-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/renesas/r8a7792.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/renesas/r8a7792.dtsi b/arch/arm/boot/dts/renesas/r8a7792.dtsi index 9e0de69ac3a3..fbdbcff1cbed 100644 --- a/arch/arm/boot/dts/renesas/r8a7792.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7792.dtsi @@ -86,7 +86,7 @@ bootph-all; }; - lbsc: bus { + lbsc: bus@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From c5f21e57e7582572dbb2eed4eaa041cad5694c90 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 28 Mar 2026 00:42:09 +0100 Subject: ARM: dts: renesas: r7s72100: Add missing unit address to bus node Add missing unit address to bus node to fix the following DTC W=1 warning: arch/arm/boot/dts/renesas/r7s72100.dtsi:40.11-46.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name Signed-off-by: Marek Vasut Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260327234244.91707-5-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/renesas/r7s72100.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/renesas/r7s72100.dtsi b/arch/arm/boot/dts/renesas/r7s72100.dtsi index 245c26bb8e03..6ec57ffa72e8 100644 --- a/arch/arm/boot/dts/renesas/r7s72100.dtsi +++ b/arch/arm/boot/dts/renesas/r7s72100.dtsi @@ -37,7 +37,7 @@ clock-div = <3>; }; - bsc: bus { + bsc: bus@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3 From 714e1d6bba0e0abe5c87c8e189a35fa690540df4 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 28 Mar 2026 00:42:10 +0100 Subject: ARM: dts: renesas: genmai: Drop superfluous cells Drop superfluous address-cells and size-cells to fix DTC W=1 warning: arch/arm/boot/dts/renesas/r7s72100-genmai.dts:28.17-55.4: Warning (avoid_unnecessary_addr_size): /flash@18000000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property Signed-off-by: Marek Vasut Fixes: 30e0a8cf886cb459 ("ARM: dts: renesas: genmai: Add FLASH nodes") Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260327234244.91707-6-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/renesas/r7s72100-genmai.dts | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts index 3c3756509714..da552a66615e 100644 --- a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts @@ -34,9 +34,6 @@ clocks = <&mstp9_clks R7S72100_CLK_SPIBSC0>; power-domains = <&cpg_clocks>; - #address-cells = <1>; - #size-cells = <1>; - partitions { compatible = "fixed-partitions"; #address-cells = <1>; -- cgit v1.2.3 From ab83176d3cf1cf1c1f6e604432905bda4515d17f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 28 Mar 2026 00:42:11 +0100 Subject: ARM: dts: renesas: rskrza1: Drop superfluous cells Drop superfluous address-cells and size-cells to fix DTC W=1 warning: arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts:32.17-72.4: Warning (avoid_unnecessary_addr_size): /flash@18000000: unnecessary #address-cells/#size-cells without "ranges", "dma-ranges" or child "reg" or "ranges" property Signed-off-by: Marek Vasut Fixes: 98537eb77d3ef185 ("ARM: dts: renesas: rskrza1: Add FLASH nodes") Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260327234244.91707-7-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven --- arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts index 91178fb9e721..3306bc9b7bc3 100644 --- a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts +++ b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts @@ -36,8 +36,6 @@ power-domains = <&cpg_clocks>; bank-width = <4>; device-width = <1>; - #address-cells = <1>; - #size-cells = <1>; partitions { compatible = "fixed-partitions"; -- cgit v1.2.3 From d6cdab742c0548b5ce3309da108bbf7a1fc6f68e Mon Sep 17 00:00:00 2001 From: Tommaso Merciai Date: Tue, 7 Apr 2026 17:34:28 +0200 Subject: arm64: dts: renesas: r9a09g057: Add #mux-state-cells to usb2{0,1}phyrst The renesas,rzv2h-usb2phy-reset binding schema defines #mux-state-cells as a required property. Add it to the usb20phyrst and usb21phyrst nodes to fix the following warnings: arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dtb: usb20phy-reset@15830000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dtb: usb21phy-reset@15840000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-emmc.dtb: usb20phy-reset@15830000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-emmc.dtb: usb21phy-reset@15840000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-sd.dtb: usb20phy-reset@15830000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-sd.dtb: usb21phy-reset@15840000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property Fixes: 6a1b6f7e56dc ("dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property") Signed-off-by: Tommaso Merciai Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/22fb9a500cdbc3272dc23cd5e36bca5fbbec75fc.1775575276.git.tommaso.merciai.xr@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a09g057.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi index 9581af58024e..6f6fe5f36bef 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi @@ -1345,6 +1345,7 @@ resets = <&cpg 0xaf>; power-domains = <&cpg>; #reset-cells = <0>; + #mux-state-cells = <1>; status = "disabled"; }; @@ -1355,6 +1356,7 @@ resets = <&cpg 0xaf>; power-domains = <&cpg>; #reset-cells = <0>; + #mux-state-cells = <1>; status = "disabled"; }; -- cgit v1.2.3 From 7e070a14beaf036588f164575bbaf7011dd26285 Mon Sep 17 00:00:00 2001 From: Tommaso Merciai Date: Tue, 7 Apr 2026 17:34:29 +0200 Subject: arm64: dts: renesas: r9a09g056: Add #mux-state-cells to usb20phyrst The renesas,rzv2h-usb2phy-reset binding schema defines #mux-state-cells as a required property. Add it to the usb20phyrst node to fix the following warnings: arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dtb: usb20phy-reset@15830000 (renesas,r9a09g056-usb2phy-reset): '#mux-state-cells' is a required property arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk-cn15-emmc.dtb: usb20phy-reset@15830000 (renesas,r9a09g056-usb2phy-reset): '#mux-state-cells' is a required property arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk-cn15-sd.dtb: usb20phy-reset@15830000 (renesas,r9a09g056-usb2phy-reset): '#mux-state-cells' is a required property Fixes: 6a1b6f7e56dc ("dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property") Signed-off-by: Tommaso Merciai Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/31210e05f7189b466b30eedbdda3d11726dac279.1775575276.git.tommaso.merciai.xr@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- arch/arm64/boot/dts/renesas/r9a09g056.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi index 40525470194e..7ccddd6a4a9a 100644 --- a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi +++ b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi @@ -1327,6 +1327,7 @@ resets = <&cpg 0xaf>; power-domains = <&cpg>; #reset-cells = <0>; + #mux-state-cells = <1>; status = "disabled"; }; -- cgit v1.2.3 From 6dba9b7268cc50166bce47608670192fd874e363 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Sat, 28 Mar 2026 09:05:45 +0000 Subject: pinctrl: renesas: rzg2l: Fix incorrect PUPD register offset for high pins during suspend/resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When saving/restoring pull-up/down register state during suspend/resume, the second PUPD register access was incorrectly using the same base offset as the first, effectively reading/writing the same register twice instead of the adjacent one. Add the correct + 4 byte offset to the second RZG2L_PCTRL_REG_ACCESS32 call so that pupd[1][port] is properly saved and restored from the next 32-bit register in the PUPD register pair, covering pins 4–7 of ports with 4 or more pins. Fixes: b2bd65fbb617 ("pinctrl: renesas: rzg2l: Add suspend/resume support for pull up/down") Signed-off-by: Biju Das Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260328090548.84124-1-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- drivers/pinctrl/renesas/pinctrl-rzg2l.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c index 561e6018fd89..68b94c748f53 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c @@ -3049,7 +3049,7 @@ static void rzg2l_pinctrl_pm_setup_regs(struct rzg2l_pinctrl *pctrl, bool suspen RZG2L_PCTRL_REG_ACCESS32(suspend, pctrl->base + PUPD(off), cache->pupd[0][port]); if (pincnt >= 4) { - RZG2L_PCTRL_REG_ACCESS32(suspend, pctrl->base + PUPD(off), + RZG2L_PCTRL_REG_ACCESS32(suspend, pctrl->base + PUPD(off) + 4, cache->pupd[1][port]); } } -- cgit v1.2.3 From c88ab9407986836820848128ce1f90f2fa49da95 Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Mon, 13 Apr 2026 19:24:51 +0100 Subject: pinctrl: renesas: rzg2l: Fix SMT register cache handling Store SMT register cache per bank instead of using a single array. On RZ/V2H(P), RZ/V2N, and RZ/G3E, the SMT register is split across two 32-bit registers: bits 0/8/16/24 control pins 0-3, while pins 4-7 are controlled by the corresponding bits in the next register. The previous implementation cached only a single SMT register, leading to incomplete save/restore of SMT state. Convert cache->smt to a per-bank array and allocate storage for both halves. Update suspend/resume handling to save and restore both SMT registers when present. Fixes: 837afa592c623 ("pinctrl: renesas: rzg2l: Add suspend/resume support for Schmitt control registers") Signed-off-by: Lad Prabhakar Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260413182456.811543-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven --- drivers/pinctrl/renesas/pinctrl-rzg2l.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c index 68b94c748f53..1c6b115e65d8 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c @@ -335,7 +335,7 @@ struct rzg2l_pinctrl_reg_cache { u32 *iolh[2]; u32 *ien[2]; u32 *pupd[2]; - u32 *smt; + u32 *smt[2]; u8 sd_ch[2]; u8 eth_poc[2]; u8 oen; @@ -2737,10 +2737,6 @@ static int rzg2l_pinctrl_reg_cache_alloc(struct rzg2l_pinctrl *pctrl) if (!cache->pfc) return -ENOMEM; - cache->smt = devm_kcalloc(pctrl->dev, nports, sizeof(*cache->smt), GFP_KERNEL); - if (!cache->smt) - return -ENOMEM; - for (u8 i = 0; i < 2; i++) { u32 n_dedicated_pins = pctrl->data->n_dedicated_pins; @@ -2759,6 +2755,11 @@ static int rzg2l_pinctrl_reg_cache_alloc(struct rzg2l_pinctrl *pctrl) if (!cache->pupd[i]) return -ENOMEM; + cache->smt[i] = devm_kcalloc(pctrl->dev, nports, sizeof(*cache->smt[i]), + GFP_KERNEL); + if (!cache->smt[i]) + return -ENOMEM; + /* Allocate dedicated cache. */ dedicated_cache->iolh[i] = devm_kcalloc(pctrl->dev, n_dedicated_pins, sizeof(*dedicated_cache->iolh[i]), @@ -3066,8 +3067,14 @@ static void rzg2l_pinctrl_pm_setup_regs(struct rzg2l_pinctrl *pctrl, bool suspen } } - if (has_smt) - RZG2L_PCTRL_REG_ACCESS32(suspend, pctrl->base + SMT(off), cache->smt[port]); + if (has_smt) { + RZG2L_PCTRL_REG_ACCESS32(suspend, pctrl->base + SMT(off), + cache->smt[0][port]); + if (pincnt >= 4) { + RZG2L_PCTRL_REG_ACCESS32(suspend, pctrl->base + SMT(off) + 4, + cache->smt[1][port]); + } + } } } -- cgit v1.2.3 From 3e256d4c40742e98132c0ef830b8cad4d50502d0 Mon Sep 17 00:00:00 2001 From: Jai Luthra Date: Mon, 20 Apr 2026 18:48:07 +0530 Subject: riscv: dts: starfive: jh7110: Drop CAMSS node The starfive-camss driver and bindings were dropped, as they were no longer being worked upon for destaging. Drop the relevant node as well to avoid the following build warning: "failed to match any schema with compatible: ['starfive,jh7110-camss']" Reported-by: Conor Dooley Closes: https://lore.kernel.org/all/20260420-very-cartel-645595ffd1c7@spud/ Signed-off-by: Jai Luthra Reviewed-by: Changhuang Liang Reviewed-by: Laurent Pinchart Signed-off-by: Conor Dooley --- arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 27 +----------------------- arch/riscv/boot/dts/starfive/jh7110.dtsi | 28 ------------------------- 2 files changed, 1 insertion(+), 54 deletions(-) diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi index 8cfe8033305d..a7a1c09a2c90 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -135,29 +135,6 @@ clock-frequency = <49152000>; }; -&camss { - assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, - <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>; - assigned-clock-rates = <49500000>, <198000000>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - }; - - port@1 { - reg = <1>; - - camss_from_csi2rx: endpoint { - remote-endpoint = <&csi2rx_to_camss>; - }; - }; - }; -}; - &csi2rx { assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>; assigned-clock-rates = <297000000>; @@ -175,9 +152,7 @@ port@1 { reg = <1>; - csi2rx_to_camss: endpoint { - remote-endpoint = <&camss_from_csi2rx>; - }; + /* remote CAMSS endpoint */ }; }; }; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index 6e56e9d20bb0..9c3e4598747e 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -1199,34 +1199,6 @@ #phy-cells = <0>; }; - camss: isp@19840000 { - compatible = "starfive,jh7110-camss"; - reg = <0x0 0x19840000 0x0 0x10000>, - <0x0 0x19870000 0x0 0x30000>; - reg-names = "syscon", "isp"; - clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>, - <&ispcrg JH7110_ISPCLK_ISPV2_TOP_WRAPPER_C>, - <&ispcrg JH7110_ISPCLK_DVP_INV>, - <&ispcrg JH7110_ISPCLK_VIN_P_AXI_WR>, - <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>, - <&syscrg JH7110_SYSCLK_ISP_TOP_CORE>, - <&syscrg JH7110_SYSCLK_ISP_TOP_AXI>; - clock-names = "apb_func", "wrapper_clk_c", "dvp_inv", - "axiwr", "mipi_rx0_pxl", "ispcore_2x", - "isp_axi"; - resets = <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_P>, - <&ispcrg JH7110_ISPRST_ISPV2_TOP_WRAPPER_C>, - <&ispcrg JH7110_ISPRST_VIN_P_AXI_RD>, - <&ispcrg JH7110_ISPRST_VIN_P_AXI_WR>, - <&syscrg JH7110_SYSRST_ISP_TOP>, - <&syscrg JH7110_SYSRST_ISP_TOP_AXI>; - reset-names = "wrapper_p", "wrapper_c", "axird", - "axiwr", "isp_top_n", "isp_top_axi"; - power-domains = <&pwrc JH7110_PD_ISP>; - interrupts = <92>, <87>, <90>, <88>; - status = "disabled"; - }; - voutcrg: clock-controller@295c0000 { compatible = "starfive,jh7110-voutcrg"; reg = <0x0 0x295c0000 0x0 0x10000>; -- cgit v1.2.3 From 0df8aa2b9aec5cd21e8c71d9cc1227e57bea43b3 Mon Sep 17 00:00:00 2001 From: Conor Dooley Date: Mon, 20 Apr 2026 12:14:31 +0100 Subject: riscv: dts: microchip: fix icicle i2c pinctrl configuration Unfortunately, an erratum with engineering sample that I was not aware of was exposed by adding pinctrl configuration to the icicle kit. When routed to MSS IOs, i2c signals are never anything other than tied low. Being an FPGA, a Libero workaround for this problem was created, that involves routing i2c signals to the FPGA fabric when the MSS IO option is selected in the configurator and then back to the intended pin using the debug "fabric test" capability. This is invisible to user facing information in the tooling and not mentioned in reference designs documentation. It manifests solely in the .xml output from the MSS configuration that the HSS firmware uses to configure the device, which Linux now overwrites using the pinctrl information. As a result, I never noticed this. My original submission had the engineering sample configuration, but I modified it on application after I was told it didn't work, not realising that the report came from a colleague with a production device, where the erratum was fixed and the workaround not automatically implemented by Libero when creating a design. Move this part of the pinctrl configuration out of the shared portion of the icicle device trees, into the portions that are specific to engineering sample and production devices so that the different settings for i2c pins can be dealt with. Although the reference design only has this workaround in place for i2c1, as i2c0 is genuinely fabric routed, move it too since the erratum affects both controllers. Link: https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/Errata/polarfiresoc/microsemi_polarfire_soc_fpga_egineering_samples_errata_er0219_v1.pdf [3.3] Fixes: 123f4276b521a ("riscv: dts: microchip: add pinctrl nodes for mpfs/icicle kit") Signed-off-by: Conor Dooley --- .../boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi | 10 ---------- .../riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts | 10 ++++++++++ arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts | 19 +++++++++++++++++++ 3 files changed, 29 insertions(+), 10 deletions(-) diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi index 2d14e92f068d..9078e5b1e49c 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi @@ -101,16 +101,6 @@ status = "okay"; }; -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_fabric>; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_mssio>; -}; - &mmuart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_fabric>; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts index 8afedece89d1..636493f6584d 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts @@ -14,6 +14,16 @@ "microchip,mpfs"; }; +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_fabric>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_mssio>; +}; + &syscontroller { microchip,bitstream-flash = <&sys_ctrl_flash>; }; diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index 556aa9638282..6fadce815c9a 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -11,3 +11,22 @@ "microchip,mpfs-icicle-kit", "microchip,mpfs"; }; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_fabric>; +}; + +/* + * Due to silicon errata, routing via MSS IOs doesn't work on ES devices. + * Instead, i2c1, appearing on B1/C1, which are normally MSS IOs, is routed + * via the fabric and back to B1/C1 via "fabric-test" functionality. + * This is done silently by Libero, so the iomux0 setting for i2c1 has to + * be fabric IO, despite tooling etc saying that MSS IOs are used. + * + * See Section 3.3 of https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/Errata/polarfiresoc/microsemi_polarfire_soc_fpga_egineering_samples_errata_er0219_v1.pdf + */ +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_fabric>; +}; -- cgit v1.2.3 From d743c1ba6c66a7dcb2bfd93fd36b7185e8a4766b Mon Sep 17 00:00:00 2001 From: Alexander Koskovich Date: Thu, 23 Apr 2026 04:51:45 +0000 Subject: pinctrl: qcom: eliza: Fix QDSS trace clock/control pingroup names Fix a few typos for these in their respective pingroups, the groups already exist they just weren't referenced. Signed-off-by: Alexander Koskovich Fixes: 6f26989e15fb ("pinctrl: qcom: Add Eliza pinctrl driver") Reviewed-by: Konrad Dybcio Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-eliza.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-eliza.c b/drivers/pinctrl/qcom/pinctrl-eliza.c index c1f756cbcdeb..dd8c04046b18 100644 --- a/drivers/pinctrl/qcom/pinctrl-eliza.c +++ b/drivers/pinctrl/qcom/pinctrl-eliza.c @@ -1340,7 +1340,7 @@ static const struct msm_pingroup eliza_groups[] = { [51] = PINGROUP(51, _, _, _, _, _, _, _, _, _, _, _), [52] = PINGROUP(52, qup1_se2, pcie1_clk_req_n, qup1_se2, ddr_bist_complete, qdss_gpio_tracedata, _, vsense_trigger_mirnat, _, _, _, _), [53] = PINGROUP(53, qup1_se2, qup1_se2, gcc_gp1, ddr_bist_stop, _, qdss_gpio_tracedata, _, _, _, _, _), - [54] = PINGROUP(54, qup1_se2, qup1_se6, qdss_gpio_tracedata, gnss_adc1, atest_usb, ddr_pxi0, _, _, _, _, _), + [54] = PINGROUP(54, qup1_se2, qup1_se6, qdss_gpio_traceclk, gnss_adc1, atest_usb, ddr_pxi0, _, _, _, _, _), [55] = PINGROUP(55, qup1_se2, dp0_hot, qup1_se6, _, gnss_adc0, atest_usb, ddr_pxi0, _, _, _, _), [56] = PINGROUP(56, usb0_hs, tsense_pwm1, tsense_pwm2, tsense_pwm3, tsense_pwm4, _, _, _, _, _, _), [57] = PINGROUP(57, sd_write_protect, _, _, _, _, _, _, _, _, _, _), @@ -1358,7 +1358,7 @@ static const struct msm_pingroup eliza_groups[] = { [69] = PINGROUP(69, cam_mclk, audio_ext_mclk0, resout_gpio, prng_rosc1, _, _, _, _, _, _, _), [70] = PINGROUP(70, cci_i2c_sda, tmess_prng2, _, phase_flag, atest_char, _, _, _, _, _, _), [71] = PINGROUP(71, cci_i2c_scl, tmess_prng3, _, phase_flag, atest_char, _, _, _, _, _, _), - [72] = PINGROUP(72, cci_i2c_sda, tmess_prng1, qdss_gpio_tracedata, atest_char, _, _, _, _, _, _, _), + [72] = PINGROUP(72, cci_i2c_sda, tmess_prng1, qdss_gpio_tracectl, atest_char, _, _, _, _, _, _, _), [73] = PINGROUP(73, cci_i2c_scl, tmess_prng0, qdss_cti, atest_char, _, _, _, _, _, _, _), [74] = PINGROUP(74, cci_i2c_sda, prng_rosc3, qdss_cti, atest_char, _, _, _, _, _, _, _), [75] = PINGROUP(75, cci_i2c_scl, _, phase_flag, _, _, _, _, _, _, _, _), @@ -1430,10 +1430,10 @@ static const struct msm_pingroup eliza_groups[] = { [141] = PINGROUP(141, _, _, _, _, _, _, _, _, _, _, egpio), [142] = PINGROUP(142, _, _, _, _, _, _, _, _, _, _, egpio), [143] = PINGROUP(143, _, _, _, _, _, _, _, _, _, _, egpio), - [144] = PINGROUP(144, _, qdss_gpio_tracedata, _, _, _, _, _, _, _, _, egpio), + [144] = PINGROUP(144, _, qdss_gpio_tracectl, _, _, _, _, _, _, _, _, egpio), [145] = PINGROUP(145, qdss_gpio_tracedata, _, _, _, _, _, _, _, _, _, egpio), [146] = PINGROUP(146, _, qdss_gpio_tracedata, _, _, _, _, _, _, _, _, egpio), - [147] = PINGROUP(147, ddr_bist_fail, _, qdss_gpio_tracedata, _, _, _, _, _, _, _, egpio), + [147] = PINGROUP(147, ddr_bist_fail, _, qdss_gpio_traceclk, _, _, _, _, _, _, _, egpio), [148] = PINGROUP(148, _, _, _, _, _, _, _, _, _, _, egpio), [149] = PINGROUP(149, _, _, _, _, _, _, _, _, _, _, egpio), [150] = PINGROUP(150, _, _, _, _, _, _, _, _, _, _, egpio), -- cgit v1.2.3 From e72ce029810390eb987a036fb2c8a5da9a23b685 Mon Sep 17 00:00:00 2001 From: Xianwei Zhao Date: Wed, 22 Apr 2026 11:44:13 +0000 Subject: pinctrl: meson: amlogic-a4: fix deadlock issue Accessing the pinconf-pins sysfs node may deadlock. pinconf_pins_show() holds pctldev->mutex, and the platform driver calls pinctrl_find_gpio_range_from_pin(), which tries to acquire the same mutex again, leading to a deadlock. Use pinctrl_find_gpio_range_from_pin_nolock() to fix this issue. Fixes: 6e9be3abb78c ("pinctrl: Add driver support for Amlogic SoCs") Signed-off-by: Xianwei Zhao Reviewed-by: Neil Armstrong Signed-off-by: Linus Walleij --- drivers/pinctrl/meson/pinctrl-amlogic-a4.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/meson/pinctrl-amlogic-a4.c b/drivers/pinctrl/meson/pinctrl-amlogic-a4.c index e2293a872dcb..35d27626a336 100644 --- a/drivers/pinctrl/meson/pinctrl-amlogic-a4.c +++ b/drivers/pinctrl/meson/pinctrl-amlogic-a4.c @@ -292,7 +292,7 @@ static int aml_calc_reg_and_bit(struct pinctrl_gpio_range *range, static int aml_pinconf_get_pull(struct aml_pinctrl *info, unsigned int pin) { struct pinctrl_gpio_range *range = - pinctrl_find_gpio_range_from_pin(info->pctl, pin); + pinctrl_find_gpio_range_from_pin_nolock(info->pctl, pin); struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); unsigned int reg, bit, val; int ret, conf; @@ -326,7 +326,7 @@ static int aml_pinconf_get_drive_strength(struct aml_pinctrl *info, u16 *drive_strength_ua) { struct pinctrl_gpio_range *range = - pinctrl_find_gpio_range_from_pin(info->pctl, pin); + pinctrl_find_gpio_range_from_pin_nolock(info->pctl, pin); struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); unsigned int reg, bit; unsigned int val; @@ -365,7 +365,7 @@ static int aml_pinconf_get_gpio_bit(struct aml_pinctrl *info, unsigned int reg_type) { struct pinctrl_gpio_range *range = - pinctrl_find_gpio_range_from_pin(info->pctl, pin); + pinctrl_find_gpio_range_from_pin_nolock(info->pctl, pin); struct aml_gpio_bank *bank = gpio_chip_to_bank(range->gc); unsigned int reg, bit, val; int ret; -- cgit v1.2.3 From 9d69033ad967b6e09b1e5b30d1a32c6c4876465d Mon Sep 17 00:00:00 2001 From: Maulik Shah Date: Thu, 23 Apr 2026 16:55:24 +0530 Subject: pinctrl: qcom: Fix GPIO to PDC wake irq map for qcs615 PDC interrupts 122-125 were meant for ibi_i3c wakeup but qcs615 do not support i3c. GPIOs 39,51,88 and 89 are also connected to different PDC pin to support non-ibi wakeup. Update the wakeirq map to reflect same. Fixes: b698f36a9d40 ("pinctrl: qcom: add the tlmm driver for QCS615 platform") Signed-off-by: Maulik Shah Signed-off-by: Navya Malempati Reviewed-by: Konrad Dybcio Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-qcs615.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-qcs615.c b/drivers/pinctrl/qcom/pinctrl-qcs615.c index 0ed4332d989e..f066b3a576f7 100644 --- a/drivers/pinctrl/qcom/pinctrl-qcs615.c +++ b/drivers/pinctrl/qcom/pinctrl-qcs615.c @@ -1040,11 +1040,11 @@ static const struct msm_pingroup qcs615_groups[] = { static const struct msm_gpio_wakeirq_map qcs615_pdc_map[] = { { 1, 45 }, { 3, 31 }, { 7, 55 }, { 9, 110 }, { 11, 34 }, { 13, 33 }, { 14, 35 }, { 17, 46 }, { 19, 48 }, { 21, 83 }, - { 22, 36 }, { 26, 38 }, { 35, 37 }, { 39, 125 }, { 41, 47 }, - { 47, 49 }, { 48, 51 }, { 50, 52 }, { 51, 123 }, { 55, 56 }, + { 22, 36 }, { 26, 38 }, { 35, 37 }, { 39, 118 }, { 41, 47 }, + { 47, 49 }, { 48, 51 }, { 50, 52 }, { 51, 116 }, { 55, 56 }, { 56, 57 }, { 57, 58 }, { 60, 60 }, { 71, 54 }, { 80, 73 }, { 81, 64 }, { 82, 50 }, { 83, 65 }, { 84, 92 }, { 85, 99 }, - { 86, 67 }, { 87, 84 }, { 88, 124 }, { 89, 122 }, { 90, 69 }, + { 86, 67 }, { 87, 84 }, { 88, 117 }, { 89, 115 }, { 90, 69 }, { 92, 88 }, { 93, 75 }, { 94, 91 }, { 95, 72 }, { 96, 82 }, { 97, 74 }, { 98, 95 }, { 99, 94 }, { 100, 100 }, { 101, 40 }, { 102, 93 }, { 103, 77 }, { 104, 78 }, { 105, 96 }, { 107, 97 }, -- cgit v1.2.3 From 0a5e695095c557d2380131b613dea4e8d90371be Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:25 +0100 Subject: firmware: arm_ffa: Check for NULL FF-A ID table while driver registration The bus match callback assumes that every FF-A driver provides an id_table and dereferences it unconditionally. Enforce that contract at registration time so a buggy client driver cannot crash the bus during match. Fixes: 92743071464f ("firmware: arm_ffa: Ensure drivers provide a probe function") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-1-8595ae450034@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/bus.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/arm_ffa/bus.c b/drivers/firmware/arm_ffa/bus.c index 9576862d89c4..601c3418e0d9 100644 --- a/drivers/firmware/arm_ffa/bus.c +++ b/drivers/firmware/arm_ffa/bus.c @@ -26,6 +26,8 @@ static int ffa_device_match(struct device *dev, const struct device_driver *drv) id_table = to_ffa_driver(drv)->id_table; ffa_dev = to_ffa_dev(dev); + if (!id_table) + return 0; while (!uuid_is_null(&id_table->uuid)) { /* @@ -123,7 +125,7 @@ int ffa_driver_register(struct ffa_driver *driver, struct module *owner, { int ret; - if (!driver->probe) + if (!driver->probe || !driver->id_table) return -EINVAL; driver->driver.bus = &ffa_bus_type; -- cgit v1.2.3 From 09527e2c534911619d7e098729711100290bc3e1 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:26 +0100 Subject: firmware: arm_ffa: Skip free_pages on RX buffer alloc failure If the RX buffer allocation fails in ffa_init(), the error path jumps to free_pages even though no buffer has been allocated yet. Route that case directly to free_drv_info so the cleanup path is only used after at least one RX/TX buffer allocation has succeeded. Fixes: 3bbfe9871005 ("firmware: arm_ffa: Add initial Arm FFA driver support") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-2-8595ae450034@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index eb2782848283..e6a051b20cb7 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -2067,7 +2067,7 @@ static int __init ffa_init(void) drv_info->rx_buffer = alloc_pages_exact(rxtx_bufsz, GFP_KERNEL); if (!drv_info->rx_buffer) { ret = -ENOMEM; - goto free_pages; + goto free_drv_info; } drv_info->tx_buffer = alloc_pages_exact(rxtx_bufsz, GFP_KERNEL); -- cgit v1.2.3 From 9b5597af8bc51c25342ab11896532644b181d302 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:27 +0100 Subject: firmware: arm_ffa: Avoid collapsing NPI work from different CPUs Notification pending interrupts are registered as per-CPU IRQs, but the driver queues all NPI handling through a single shared work_struct. That allows queue_work_on() calls from different CPUs to collapse onto a single pending work item even though the work function uses the CPU it runs on to fetch and handle per-CPU notifications. Move notif_pcpu_work into the per-CPU ffa_pcpu_irq state and initialize one work item per CPU. This keeps NPI handling independent per CPU and avoids losing notifications when multiple CPUs queue work concurrently. Link: https://patch.msgid.link/20260428-ffa_fixes-v2-3-8595ae450034@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index e6a051b20cb7..4e66c7325a4e 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -87,6 +87,7 @@ static inline int ffa_to_linux_errno(int errno) struct ffa_pcpu_irq { struct ffa_drv_info *info; + struct work_struct notif_pcpu_work; }; struct ffa_drv_info { @@ -106,7 +107,6 @@ struct ffa_drv_info { unsigned int cpuhp_state; struct ffa_pcpu_irq __percpu *irq_pcpu; struct workqueue_struct *notif_pcpu_wq; - struct work_struct notif_pcpu_work; struct work_struct sched_recv_irq_work; struct xarray partition_info; DECLARE_HASHTABLE(notifier_hash, ilog2(FFA_MAX_NOTIFICATIONS)); @@ -1539,8 +1539,9 @@ ffa_self_notif_handle(u16 vcpu, bool is_per_vcpu, void *cb_data) static void notif_pcpu_irq_work_fn(struct work_struct *work) { - struct ffa_drv_info *info = container_of(work, struct ffa_drv_info, + struct ffa_pcpu_irq *pcpu = container_of(work, struct ffa_pcpu_irq, notif_pcpu_work); + struct ffa_drv_info *info = pcpu->info; ffa_self_notif_handle(smp_processor_id(), true, info); } @@ -1811,7 +1812,7 @@ static irqreturn_t notif_pend_irq_handler(int irq, void *irq_data) struct ffa_drv_info *info = pcpu->info; queue_work_on(smp_processor_id(), info->notif_pcpu_wq, - &info->notif_pcpu_work); + &pcpu->notif_pcpu_work); return IRQ_HANDLED; } @@ -1928,8 +1929,11 @@ static int ffa_init_pcpu_irq(void) if (!irq_pcpu) return -ENOMEM; - for_each_present_cpu(cpu) + for_each_present_cpu(cpu) { per_cpu_ptr(irq_pcpu, cpu)->info = drv_info; + INIT_WORK(&per_cpu_ptr(irq_pcpu, cpu)->notif_pcpu_work, + notif_pcpu_irq_work_fn); + } drv_info->irq_pcpu = irq_pcpu; @@ -1958,7 +1962,6 @@ static int ffa_init_pcpu_irq(void) } INIT_WORK(&drv_info->sched_recv_irq_work, ffa_sched_recv_irq_work_fn); - INIT_WORK(&drv_info->notif_pcpu_work, notif_pcpu_irq_work_fn); drv_info->notif_pcpu_wq = create_workqueue("ffa_pcpu_irq_notification"); if (!drv_info->notif_pcpu_wq) return -EINVAL; -- cgit v1.2.3 From 9985d5357ed93af0d1933969c247e966957730e1 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:28 +0100 Subject: firmware: arm_ffa: Fix per-vcpu self notifications handling in workqueue Per-vcpu notification handling already runs from a per-cpu work item on the target cpu. Routing that path back through smp_call_function_single() re-enters the call-function IPI path and executes the notification handler with interrupts disabled. That makes the framework path unsafe, since it takes a mutex, allocates memory with GFP_KERNEL, and invokes client callbacks. Handle per-vcpu self notifications directly from the existing per-cpu work item instead. This keeps the per-vcpu path in task context and avoids the extra IPI hop entirely. Fixes: 3a3e2b83e805 ("firmware: arm_ffa: Avoid queuing work when running on the worker queue") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-4-8595ae450034@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 4e66c7325a4e..2241e851f7ae 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -1543,7 +1543,7 @@ static void notif_pcpu_irq_work_fn(struct work_struct *work) notif_pcpu_work); struct ffa_drv_info *info = pcpu->info; - ffa_self_notif_handle(smp_processor_id(), true, info); + notif_get_and_handle(info); } static const struct ffa_info_ops ffa_drv_info_ops = { -- cgit v1.2.3 From 6d3daa9b8d313f42d52e75590310f26a29b61b44 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:29 +0100 Subject: firmware: arm_ffa: Unregister bus notifier on teardown for FF-A v1.0 For FF-A v1.0 the driver registers a bus notifier to backfill UUID matching, but the notifier was never unregistered on cleanup paths. Track the registration state and unregister it during teardown and early partition-setup failure. Fixes: 9dd15934f60d ("firmware: arm_ffa: Move the FF-A v1.0 NULL UUID workaround to bus notifier") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-5-8595ae450034@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 2241e851f7ae..a122814eb6d7 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -101,6 +101,7 @@ struct ffa_drv_info { bool mem_ops_native; bool msg_direct_req2_supp; bool bitmap_created; + bool bus_notifier_registered; bool notif_enabled; unsigned int sched_recv_irq; unsigned int notif_pend_irq; @@ -1630,6 +1631,15 @@ static struct notifier_block ffa_bus_nb = { .notifier_call = ffa_bus_notifier, }; +static void ffa_bus_notifier_unregister(void) +{ + if (!drv_info->bus_notifier_registered) + return; + + bus_unregister_notifier(&ffa_bus_type, &ffa_bus_nb); + drv_info->bus_notifier_registered = false; +} + static int ffa_xa_add_partition_info(struct ffa_device *dev) { struct ffa_dev_part_info *info; @@ -1713,6 +1723,8 @@ static void ffa_partitions_cleanup(void) struct list_head *phead; unsigned long idx; + ffa_bus_notifier_unregister(); + /* Clean up/free all registered devices */ ffa_devices_unregister(); @@ -1740,11 +1752,14 @@ static int ffa_setup_partitions(void) ret = bus_register_notifier(&ffa_bus_type, &ffa_bus_nb); if (ret) pr_err("Failed to register FF-A bus notifiers\n"); + else + drv_info->bus_notifier_registered = true; } count = ffa_partition_probe(&uuid_null, &pbuf); if (count <= 0) { pr_info("%s: No partitions found, error %d\n", __func__, count); + ffa_bus_notifier_unregister(); return -EINVAL; } -- cgit v1.2.3 From 22d0213e55fbb723c2c00dd5aa855a6eaad95b23 Mon Sep 17 00:00:00 2001 From: Petr Tesarik Date: Fri, 10 Apr 2026 13:35:06 +0200 Subject: dma-direct: fix use of max_pfn Calculate the correct physical address of the last byte of memory. Since max_pfn is in fact "the PFN of the first page after the highest system RAM in physical address space", the highest address that might be used for a DMA buffer is one byte below max_pfn << PAGE_SHIFT. This fix is unlikely to make any difference in practice. It's just that the current formula is slightly confusing. Signed-off-by: Petr Tesarik Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20260410113506.262579-1-ptesarik@suse.com --- kernel/dma/direct.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/dma/direct.c b/kernel/dma/direct.c index ec887f443741..583c5922bca2 100644 --- a/kernel/dma/direct.c +++ b/kernel/dma/direct.c @@ -39,7 +39,7 @@ static inline struct page *dma_direct_to_page(struct device *dev, u64 dma_direct_get_required_mask(struct device *dev) { - phys_addr_t phys = (phys_addr_t)(max_pfn - 1) << PAGE_SHIFT; + phys_addr_t phys = ((phys_addr_t)max_pfn << PAGE_SHIFT) - 1; u64 max_dma = phys_to_dma_direct(dev, phys); return (1ULL << (fls64(max_dma) - 1)) * 2 - 1; @@ -553,7 +553,7 @@ int dma_direct_mmap(struct device *dev, struct vm_area_struct *vma, int dma_direct_supported(struct device *dev, u64 mask) { - u64 min_mask = (max_pfn - 1) << PAGE_SHIFT; + u64 min_mask = ((u64)max_pfn << PAGE_SHIFT) - 1; /* * Because 32-bit DMA masks are so common we expect every architecture -- cgit v1.2.3 From 3fe7ecab1a0856aafe1026a35af1621a5c18d53f Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Mon, 27 Apr 2026 07:17:19 +0200 Subject: s390/pai: Disable duplicate read of kernel PAI counter value The PAI crypto counter design allows for user space and kernel space PAI counter increment recording. This is achieved by splitting the recording page in half. The upper part of the 4KB page records user space increments of PAI crypto counter and the lower half records kernel space increments. The page itself looks like: lowcore ptr ---> ++++++++++++++++++++++++ |user space area | +----------------------+ |kernel space area | ++++++++++++++++++++++++ User space and kernel space entries are handled via a kernel_offset value when wrting. For PAI crypto counters this offset is 2048 or half of a page size. For PAI NNPA counter design this distinction was not needed. There is no user and kernel space part for the page pointed to by lowcore. The set up is: lowcore ptr ---> ++++++++++++++++++++++++ |user + kernel space | |area | | | ++++++++++++++++++++++++ There is always only one counter value recorded and saved. Depending on number of CPUs and machine load, the number of PAI NNPA counter increment differs between counting (perf stat) and recording (perf record). The number reported by sampling was double the number shown by counting. This was caused by a double read of the PAI NNPA values in function pai_copy(). The first part of that function reads the kernel space part. The offset into the kernel page part must be larger than zero. The second part of that function reads the user space part, which begins of offset zero. This works fine for PAI crypto counters. It fails for PAI NNPA counters because the PMU device driver does not support that feature and has a kernel_offset value of 0x0. Executing both user and kernel space read out might end up reading user space value twice. For the PAI NNPA PMU prohibit the kernel space part read out. Cc: stable@vger.kernel.org Fixes: f12473541356 ("s390/pai_crypto: Rename paicrypt_copy() to pai_copy()") Signed-off-by: Thomas Richter Reviewed-by: Sumanth Korikkar Signed-off-by: Alexander Gordeev --- arch/s390/kernel/perf_pai.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/perf_pai.c b/arch/s390/kernel/perf_pai.c index 86f71a3d1ef2..f13c5c5fbea6 100644 --- a/arch/s390/kernel/perf_pai.c +++ b/arch/s390/kernel/perf_pai.c @@ -651,7 +651,7 @@ static void pai_have_sample(struct perf_event *event, struct pai_map *cpump) rawsize = pai_copy(cpump->save, cpump->area, pp, (unsigned long *)PAI_SAVE_AREA(event), event->attr.exclude_user, - event->attr.exclude_kernel); + !pp->kernel_offset ? true : event->attr.exclude_kernel); if (rawsize) /* No incremented counters */ pai_push_sample(rawsize, cpump, event); } -- cgit v1.2.3 From d3894e4e09085bc6450aae6e3d30d13f1b1c8691 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Fri, 1 May 2026 21:10:38 +0900 Subject: ntfs: fix variable dereferenced before check ni and attr in ntfs_attrlist_entry_add() Smatch warnings: ntfs_attrlist_entry_add() warn: variable dereferenced before check 'ni' ntfs_attrlist_entry_add() warn: variable dereferenced before check 'attr' Moves the ntfs_debug() call after the NULL pointer checks to ensure safe access to the structure members. Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Namjae Jeon --- fs/ntfs/attrlist.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/ntfs/attrlist.c b/fs/ntfs/attrlist.c index bd501e8a628c..c2594d4c83b0 100644 --- a/fs/ntfs/attrlist.c +++ b/fs/ntfs/attrlist.c @@ -119,15 +119,14 @@ int ntfs_attrlist_entry_add(struct ntfs_inode *ni, struct attr_record *attr) struct mft_record *ni_mrec; u8 *old_al; - ntfs_debug("Entering for inode 0x%llx, attr 0x%x.\n", - (long long) ni->mft_no, - (unsigned int) le32_to_cpu(attr->type)); - if (!ni || !attr) { ntfs_debug("Invalid arguments.\n"); return -EINVAL; } + ntfs_debug("Entering for inode 0x%llx, attr 0x%x.\n", + ni->mft_no, (unsigned int) le32_to_cpu(attr->type)); + ni_mrec = map_mft_record(ni); if (IS_ERR(ni_mrec)) { ntfs_debug("Invalid arguments.\n"); -- cgit v1.2.3 From fd672888cccd6b855154efe0ac78e7ce3e8ab088 Mon Sep 17 00:00:00 2001 From: Yongxing Mou Date: Mon, 27 Apr 2026 14:35:19 +0800 Subject: phy: qcom: edp: Unify generic DP/eDP swing and pre-emphasis tables MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current eDP and DP swing/pre-emphasis tables do not match the HPG requirements for the supported platforms, correct the table accordingly. The generic tables which can be shared as follows: DP mode： -sa8775p/sc7280/sc8280xp/x1e80100 -glymur -sc8180x eDP mode(low vdiff): -glymur/sa8775p/sc8280xp/x1e80100 -sc7280 -sc8180x The proper tables for SC8180X and SC7280 will be added in a later patch, since they need separate table. Cc: stable@vger.kernel.org Fixes: f199223cb490 ("phy: qcom: Introduce new eDP PHY driver") Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Signed-off-by: Yongxing Mou Link: https://patch.msgid.link/20260427-edp_phy-v5-1-3bb876824475@oss.qualcomm.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-edp.c | 41 +++++++++---------------------------- 1 file changed, 10 insertions(+), 31 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index 7372de05a0b8..2af3fd63832f 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -116,17 +116,17 @@ struct qcom_edp { }; static const u8 dp_swing_hbr_rbr[4][4] = { - { 0x08, 0x0f, 0x16, 0x1f }, + { 0x07, 0x0f, 0x16, 0x1f }, { 0x11, 0x1e, 0x1f, 0xff }, { 0x16, 0x1f, 0xff, 0xff }, { 0x1f, 0xff, 0xff, 0xff } }; static const u8 dp_pre_emp_hbr_rbr[4][4] = { - { 0x00, 0x0d, 0x14, 0x1a }, + { 0x00, 0x0e, 0x15, 0x1a }, { 0x00, 0x0e, 0x15, 0xff }, { 0x00, 0x0e, 0xff, 0xff }, - { 0x03, 0xff, 0xff, 0xff } + { 0x04, 0xff, 0xff, 0xff } }; static const u8 dp_swing_hbr2_hbr3[4][4] = { @@ -158,7 +158,7 @@ static const u8 edp_swing_hbr_rbr[4][4] = { }; static const u8 edp_pre_emp_hbr_rbr[4][4] = { - { 0x05, 0x12, 0x17, 0x1d }, + { 0x05, 0x11, 0x17, 0x1d }, { 0x05, 0x11, 0x18, 0xff }, { 0x06, 0x11, 0xff, 0xff }, { 0x00, 0xff, 0xff, 0xff } @@ -172,10 +172,10 @@ static const u8 edp_swing_hbr2_hbr3[4][4] = { }; static const u8 edp_pre_emp_hbr2_hbr3[4][4] = { - { 0x08, 0x11, 0x17, 0x1b }, - { 0x00, 0x0c, 0x13, 0xff }, - { 0x05, 0x10, 0xff, 0xff }, - { 0x00, 0xff, 0xff, 0xff } + { 0x0c, 0x15, 0x19, 0x1e }, + { 0x0b, 0x15, 0x19, 0xff }, + { 0x0e, 0x14, 0xff, 0xff }, + { 0x0d, 0xff, 0xff, 0xff } }; static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg = { @@ -193,27 +193,6 @@ static const u8 edp_phy_vco_div_cfg_v4[4] = { 0x01, 0x01, 0x02, 0x00, }; -static const u8 edp_pre_emp_hbr_rbr_v5[4][4] = { - { 0x05, 0x11, 0x17, 0x1d }, - { 0x05, 0x11, 0x18, 0xff }, - { 0x06, 0x11, 0xff, 0xff }, - { 0x00, 0xff, 0xff, 0xff } -}; - -static const u8 edp_pre_emp_hbr2_hbr3_v5[4][4] = { - { 0x0c, 0x15, 0x19, 0x1e }, - { 0x0b, 0x15, 0x19, 0xff }, - { 0x0e, 0x14, 0xff, 0xff }, - { 0x0d, 0xff, 0xff, 0xff } -}; - -static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg_v5 = { - .swing_hbr_rbr = &edp_swing_hbr_rbr, - .swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3, - .pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr_v5, - .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3_v5, -}; - static const u8 edp_phy_aux_cfg_v5[DP_AUX_CFG_SIZE] = { 0x00, 0x13, 0xa4, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03, 0x02, 0x02, 0x00, }; @@ -564,7 +543,7 @@ static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = { .is_edp = false, .aux_cfg = edp_phy_aux_cfg_v5, .vco_div_cfg = edp_phy_vco_div_cfg_v4, - .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v5, + .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, .ver_ops = &qcom_edp_phy_ops_v4, }; @@ -945,7 +924,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v8 = { static struct qcom_edp_phy_cfg glymur_phy_cfg = { .aux_cfg = edp_phy_aux_cfg_v8, .vco_div_cfg = edp_phy_vco_div_cfg_v8, - .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v5, + .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, .ver_ops = &qcom_edp_phy_ops_v8, }; -- cgit v1.2.3 From 3011c365a329cf2db6d55e8d684550dc88350436 Mon Sep 17 00:00:00 2001 From: Yongxing Mou Date: Mon, 27 Apr 2026 14:35:20 +0800 Subject: phy: qcom: edp: Add eDP/DP mode switch support The eDP PHY supports both eDP/DP modes, each requiring a different swing/pre-emphasis table. However, the driver currently uses a fixed static table for eDP programming rather than selecting the appropriate table based on the current mode. Add separate tables for eDP and DP modes, and select the appropriate table dynamically based on the current mode. Glymur's DP mode table differs from the other platforms, add a dedicated table for it. This also fixes the table mismatch for X1E80100 (eDP) and SA8775P (DP). Cc: stable@vger.kernel.org Fixes: 3f12bf16213c ("phy: qcom: edp: Add support for eDP PHY on SA8775P") Reviewed-by: Konrad Dybcio Signed-off-by: Yongxing Mou Link: https://patch.msgid.link/20260427-edp_phy-v5-2-3bb876824475@oss.qualcomm.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-edp.c | 46 +++++++++++++++++++++++++++---------- 1 file changed, 34 insertions(+), 12 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index 2af3fd63832f..3266026cfe37 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -87,7 +87,8 @@ struct qcom_edp_phy_cfg { bool is_edp; const u8 *aux_cfg; const u8 *vco_div_cfg; - const struct qcom_edp_swing_pre_emph_cfg *swing_pre_emph_cfg; + const struct qcom_edp_swing_pre_emph_cfg *dp_swing_pre_emph_cfg; + const struct qcom_edp_swing_pre_emph_cfg *edp_swing_pre_emph_cfg; const struct phy_ver_ops *ver_ops; }; @@ -150,6 +151,20 @@ static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg = { .pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3, }; +static const u8 dp_pre_emp_hbr_rbr_v8[4][4] = { + { 0x00, 0x0e, 0x15, 0x1a }, + { 0x00, 0x0e, 0x15, 0xff }, + { 0x00, 0x0e, 0xff, 0xff }, + { 0x00, 0xff, 0xff, 0xff } +}; + +static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg_v8 = { + .swing_hbr_rbr = &dp_swing_hbr_rbr, + .swing_hbr3_hbr2 = &dp_swing_hbr2_hbr3, + .pre_emphasis_hbr_rbr = &dp_pre_emp_hbr_rbr_v8, + .pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3, +}; + static const u8 edp_swing_hbr_rbr[4][4] = { { 0x07, 0x0f, 0x16, 0x1f }, { 0x0d, 0x16, 0x1e, 0xff }, @@ -246,7 +261,7 @@ static int qcom_edp_phy_init(struct phy *phy) * when more information becomes available about why this is * even needed. */ - if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp) + if (edp->cfg->dp_swing_pre_emph_cfg && !edp->is_edp) aux_cfg[8] = 0xb7; writel(0xfc, edp->edp + DP_PHY_MODE); @@ -270,7 +285,7 @@ out_disable_supplies: static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configure_opts_dp *dp_opts) { - const struct qcom_edp_swing_pre_emph_cfg *cfg = edp->cfg->swing_pre_emph_cfg; + const struct qcom_edp_swing_pre_emph_cfg *cfg; unsigned int v_level = 0; unsigned int p_level = 0; u8 ldo_config; @@ -278,12 +293,14 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur u8 emph; int i; + if (edp->is_edp) + cfg = edp->cfg->edp_swing_pre_emph_cfg; + else + cfg = edp->cfg->dp_swing_pre_emph_cfg; + if (!cfg) return 0; - if (edp->is_edp) - cfg = &edp_phy_swing_pre_emph_cfg; - for (i = 0; i < dp_opts->lanes; i++) { v_level = max(v_level, dp_opts->voltage[i]); p_level = max(p_level, dp_opts->pre[i]); @@ -543,7 +560,8 @@ static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = { .is_edp = false, .aux_cfg = edp_phy_aux_cfg_v5, .vco_div_cfg = edp_phy_vco_div_cfg_v4, - .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, + .dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, + .edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, .ver_ops = &qcom_edp_phy_ops_v4, }; @@ -556,7 +574,8 @@ static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = { static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = { .aux_cfg = edp_phy_aux_cfg_v4, .vco_div_cfg = edp_phy_vco_div_cfg_v4, - .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, + .dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, + .edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, .ver_ops = &qcom_edp_phy_ops_v4, }; @@ -564,7 +583,8 @@ static const struct qcom_edp_phy_cfg sc8280xp_edp_phy_cfg = { .is_edp = true, .aux_cfg = edp_phy_aux_cfg_v4, .vco_div_cfg = edp_phy_vco_div_cfg_v4, - .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, + .dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, + .edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, .ver_ops = &qcom_edp_phy_ops_v4, }; @@ -745,7 +765,8 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v6 = { static struct qcom_edp_phy_cfg x1e80100_phy_cfg = { .aux_cfg = edp_phy_aux_cfg_v4, .vco_div_cfg = edp_phy_vco_div_cfg_v4, - .swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, + .dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, + .edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, .ver_ops = &qcom_edp_phy_ops_v6, }; @@ -924,7 +945,8 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v8 = { static struct qcom_edp_phy_cfg glymur_phy_cfg = { .aux_cfg = edp_phy_aux_cfg_v8, .vco_div_cfg = edp_phy_vco_div_cfg_v8, - .swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, + .dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg_v8, + .edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg, .ver_ops = &qcom_edp_phy_ops_v8, }; @@ -942,7 +964,7 @@ static int qcom_edp_phy_power_on(struct phy *phy) if (ret) return ret; - if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp) + if (edp->cfg->edp_swing_pre_emph_cfg && !edp->is_edp) ldo_config = 0x1; writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG); -- cgit v1.2.3 From 3d22594d6f842814b7718600486fe3ce9453abf0 Mon Sep 17 00:00:00 2001 From: Yongxing Mou Date: Mon, 27 Apr 2026 14:35:21 +0800 Subject: phy: qcom: edp: Add SC7280/SC8180X swing/pre-emphasis tables SC7280 and SC8180X previously shared the same cfg because they did not use swing/pre-emphasis tables. Add the corresponding tables for these platforms. Since they have different PHY sub-versions, their eDP/DP mode tables also differ, so move SC8180X to its own cfg instead of reusing the SC7280 one. Signed-off-by: Yongxing Mou Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260427-edp_phy-v5-3-3bb876824475@oss.qualcomm.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-edp.c | 84 +++++++++++++++++++++++++++++++++++-- 1 file changed, 80 insertions(+), 4 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index 3266026cfe37..3e613b374032 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -165,6 +165,33 @@ static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg_v8 = { .pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3, }; +static const u8 dp_swing_hbr2_hbr3_v2[4][4] = { + { 0x27, 0x2f, 0x36, 0xff }, + { 0x31, 0x3e, 0x3f, 0xff }, + { 0x3a, 0x3f, 0xff, 0xff }, + { 0xff, 0xff, 0xff, 0xff } +}; + +static const u8 dp_pre_emp_hbr2_hbr3_v2[4][4] = { + { 0x20, 0x2e, 0x35, 0xff }, + { 0x20, 0x2e, 0x35, 0xff }, + { 0x20, 0x2e, 0xff, 0xff }, + { 0xff, 0xff, 0xff, 0xff } +}; + +static const struct qcom_edp_swing_pre_emph_cfg dp_phy_swing_pre_emph_cfg_v2 = { + /* + * NOTE: The HPG does not specify a separate swing_hbr_rbr table. + * Reuse the HBR2/HBR3 table for now. + * + * TODO: Update this once the HPG explicitly defines RBR/HBR swing values. + */ + .swing_hbr_rbr = &dp_swing_hbr2_hbr3_v2, + .swing_hbr3_hbr2 = &dp_swing_hbr2_hbr3_v2, + .pre_emphasis_hbr_rbr = &dp_pre_emp_hbr2_hbr3_v2, + .pre_emphasis_hbr3_hbr2 = &dp_pre_emp_hbr2_hbr3_v2, +}; + static const u8 edp_swing_hbr_rbr[4][4] = { { 0x07, 0x0f, 0x16, 0x1f }, { 0x0d, 0x16, 0x1e, 0xff }, @@ -208,6 +235,48 @@ static const u8 edp_phy_vco_div_cfg_v4[4] = { 0x01, 0x01, 0x02, 0x00, }; +static const u8 edp_pre_emp_hbr_rbr_v2[4][4] = { + { 0x05, 0x12, 0x17, 0x1d }, + { 0x05, 0x11, 0x18, 0xff }, + { 0x06, 0x11, 0xff, 0xff }, + { 0x00, 0xff, 0xff, 0xff } +}; + +static const u8 edp_pre_emp_hbr2_hbr3_v2[4][4] = { + { 0x0c, 0x15, 0x19, 0x1e }, + { 0x08, 0x15, 0x19, 0xff }, + { 0x0e, 0x14, 0xff, 0xff }, + { 0x0d, 0xff, 0xff, 0xff } +}; + +static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg_v2 = { + .swing_hbr_rbr = &edp_swing_hbr_rbr, + .swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3, + .pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr_v2, + .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3_v2, +}; + +static const u8 edp_swing_hbr2_hbr3_v3[4][4] = { + { 0x06, 0x11, 0x16, 0x1b }, + { 0x0b, 0x19, 0x1f, 0xff }, + { 0x18, 0x1f, 0xff, 0xff }, + { 0x1f, 0xff, 0xff, 0xff } +}; + +static const u8 edp_pre_emp_hbr2_hbr3_v3[4][4] = { + { 0x0c, 0x15, 0x19, 0x1e }, + { 0x09, 0x14, 0x19, 0xff }, + { 0x0f, 0x14, 0xff, 0xff }, + { 0x0d, 0xff, 0xff, 0xff } +}; + +static const struct qcom_edp_swing_pre_emph_cfg edp_phy_swing_pre_emph_cfg_v3 = { + .swing_hbr_rbr = &edp_swing_hbr_rbr, + .swing_hbr3_hbr2 = &edp_swing_hbr2_hbr3_v3, + .pre_emphasis_hbr_rbr = &edp_pre_emp_hbr_rbr, + .pre_emphasis_hbr3_hbr2 = &edp_pre_emp_hbr2_hbr3_v3, +}; + static const u8 edp_phy_aux_cfg_v5[DP_AUX_CFG_SIZE] = { 0x00, 0x13, 0xa4, 0x00, 0x0a, 0x26, 0x0a, 0x03, 0x37, 0x03, 0x02, 0x02, 0x00, }; @@ -298,9 +367,6 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur else cfg = edp->cfg->dp_swing_pre_emph_cfg; - if (!cfg) - return 0; - for (i = 0; i < dp_opts->lanes; i++) { v_level = max(v_level, dp_opts->voltage[i]); p_level = max(p_level, dp_opts->pre[i]); @@ -568,6 +634,16 @@ static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = { static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = { .aux_cfg = edp_phy_aux_cfg_v4, .vco_div_cfg = edp_phy_vco_div_cfg_v4, + .dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, + .edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v3, + .ver_ops = &qcom_edp_phy_ops_v4, +}; + +static const struct qcom_edp_phy_cfg sc8180x_dp_phy_cfg = { + .aux_cfg = edp_phy_aux_cfg_v4, + .vco_div_cfg = edp_phy_vco_div_cfg_v4, + .dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg_v2, + .edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v2, .ver_ops = &qcom_edp_phy_ops_v4, }; @@ -1348,7 +1424,7 @@ static const struct of_device_id qcom_edp_phy_match_table[] = { { .compatible = "qcom,glymur-dp-phy", .data = &glymur_phy_cfg, }, { .compatible = "qcom,sa8775p-edp-phy", .data = &sa8775p_dp_phy_cfg, }, { .compatible = "qcom,sc7280-edp-phy", .data = &sc7280_dp_phy_cfg, }, - { .compatible = "qcom,sc8180x-edp-phy", .data = &sc7280_dp_phy_cfg, }, + { .compatible = "qcom,sc8180x-edp-phy", .data = &sc8180x_dp_phy_cfg, }, { .compatible = "qcom,sc8280xp-dp-phy", .data = &sc8280xp_dp_phy_cfg, }, { .compatible = "qcom,sc8280xp-edp-phy", .data = &sc8280xp_edp_phy_cfg, }, { .compatible = "qcom,x1e80100-dp-phy", .data = &x1e80100_phy_cfg, }, -- cgit v1.2.3 From bf237a9fcbbf9d658522f7315ffc04bf2d49be42 Mon Sep 17 00:00:00 2001 From: Yongxing Mou Date: Mon, 27 Apr 2026 14:35:22 +0800 Subject: phy: qcom: edp: Fix AUX_CFG8 programming for DP mode AUX_CFG8 depends on whether the PHY is operating in eDP or DP mode, not the selected swing/pre-emphasis table. All supported platforms already have the proper tables, so remove the unnecessary check. Cc: stable@vger.kernel.org Fixes: 6078b8ce070c ("phy: qcom: edp: Add set_mode op for configuring eDP/DP submode") Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Signed-off-by: Yongxing Mou Link: https://patch.msgid.link/20260427-edp_phy-v5-4-3bb876824475@oss.qualcomm.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-edp.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index 3e613b374032..3a848f18a8d6 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -325,12 +325,7 @@ static int qcom_edp_phy_init(struct phy *phy) DP_PHY_PD_CTL_PLL_PWRDN | DP_PHY_PD_CTL_DP_CLAMP_EN, edp->edp + DP_PHY_PD_CTL); - /* - * TODO: Re-work the conditions around setting the cfg8 value - * when more information becomes available about why this is - * even needed. - */ - if (edp->cfg->dp_swing_pre_emph_cfg && !edp->is_edp) + if (!edp->is_edp) aux_cfg[8] = 0xb7; writel(0xfc, edp->edp + DP_PHY_MODE); -- cgit v1.2.3 From 519a228ee40d1be3453d1da339b4577c3785e333 Mon Sep 17 00:00:00 2001 From: Yongxing Mou Date: Mon, 27 Apr 2026 14:35:23 +0800 Subject: phy: qcom: edp: Add PHY-specific LDO config for eDP low vdiff For eDP low vdiff, the LDO setting depends on the PHY version rather than being a simple 0x0 or 0x1 value. Introduce a PHY callback to program the correct LDO setting according to the HPG. Since SC7280/SC8180X uses different LDO settings from SA8775P/SC8280XP, introduce qcom_edp_phy_ops_v3 to keep the LDO setting correct. Cc: stable@vger.kernel.org Fixes: f199223cb490 ("phy: qcom: Introduce new eDP PHY driver") Signed-off-by: Yongxing Mou Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Tested-by: Konrad Dybcio # SC8280XP X13s Link: https://patch.msgid.link/20260427-edp_phy-v5-5-3bb876824475@oss.qualcomm.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-edp.c | 88 ++++++++++++++++++++++++++++++++----- 1 file changed, 77 insertions(+), 11 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index 3a848f18a8d6..a3c893f72908 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -81,6 +81,7 @@ struct phy_ver_ops { int (*com_clk_fwd_cfg)(const struct qcom_edp *edp); int (*com_configure_pll)(const struct qcom_edp *edp); int (*com_configure_ssc)(const struct qcom_edp *edp); + int (*com_ldo_config)(const struct qcom_edp *edp); }; struct qcom_edp_phy_cfg { @@ -352,7 +353,7 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur const struct qcom_edp_swing_pre_emph_cfg *cfg; unsigned int v_level = 0; unsigned int p_level = 0; - u8 ldo_config; + int ret; u8 swing; u8 emph; int i; @@ -378,13 +379,13 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur if (swing == 0xff || emph == 0xff) return -EINVAL; - ldo_config = edp->is_edp ? 0x0 : 0x1; + ret = edp->cfg->ver_ops->com_ldo_config(edp); + if (ret) + return ret; - writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG); writel(swing, edp->tx0 + TXn_TX_DRV_LVL); writel(emph, edp->tx0 + TXn_TX_EMP_POST1_LVL); - writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG); writel(swing, edp->tx1 + TXn_TX_DRV_LVL); writel(emph, edp->tx1 + TXn_TX_EMP_POST1_LVL); @@ -608,6 +609,52 @@ static int qcom_edp_com_configure_pll_v4(const struct qcom_edp *edp) return 0; } +static int qcom_edp_ldo_config_v3(const struct qcom_edp *edp) +{ + const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts; + u32 ldo_config; + + if (!edp->is_edp) + ldo_config = 0x0; + else if (dp_opts->link_rate <= 2700) + ldo_config = 0x81; + else + ldo_config = 0x41; + + writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG); + writel(dp_opts->lanes > 2 ? ldo_config : 0x00, edp->tx1 + TXn_LDO_CONFIG); + + return 0; +} + +static int qcom_edp_ldo_config_v4(const struct qcom_edp *edp) +{ + const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts; + u32 ldo_config; + + if (!edp->is_edp) + ldo_config = 0x0; + else if (dp_opts->link_rate <= 2700) + ldo_config = 0xc1; + else + ldo_config = 0x81; + + writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG); + writel(dp_opts->lanes > 2 ? ldo_config : 0x00, edp->tx1 + TXn_LDO_CONFIG); + + return 0; +} + +static const struct phy_ver_ops qcom_edp_phy_ops_v3 = { + .com_power_on = qcom_edp_phy_power_on_v4, + .com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v4, + .com_bias_en_clkbuflr = qcom_edp_com_bias_en_clkbuflr_v4, + .com_clk_fwd_cfg = qcom_edp_com_clk_fwd_cfg_v4, + .com_configure_pll = qcom_edp_com_configure_pll_v4, + .com_configure_ssc = qcom_edp_com_configure_ssc_v4, + .com_ldo_config = qcom_edp_ldo_config_v3, +}; + static const struct phy_ver_ops qcom_edp_phy_ops_v4 = { .com_power_on = qcom_edp_phy_power_on_v4, .com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v4, @@ -615,6 +662,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v4 = { .com_clk_fwd_cfg = qcom_edp_com_clk_fwd_cfg_v4, .com_configure_pll = qcom_edp_com_configure_pll_v4, .com_configure_ssc = qcom_edp_com_configure_ssc_v4, + .com_ldo_config = qcom_edp_ldo_config_v4, }; static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = { @@ -631,7 +679,7 @@ static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = { .vco_div_cfg = edp_phy_vco_div_cfg_v4, .dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg, .edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v3, - .ver_ops = &qcom_edp_phy_ops_v4, + .ver_ops = &qcom_edp_phy_ops_v3, }; static const struct qcom_edp_phy_cfg sc8180x_dp_phy_cfg = { @@ -639,7 +687,7 @@ static const struct qcom_edp_phy_cfg sc8180x_dp_phy_cfg = { .vco_div_cfg = edp_phy_vco_div_cfg_v4, .dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg_v2, .edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v2, - .ver_ops = &qcom_edp_phy_ops_v4, + .ver_ops = &qcom_edp_phy_ops_v3, }; static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = { @@ -824,6 +872,24 @@ static int qcom_edp_com_configure_pll_v6(const struct qcom_edp *edp) return 0; } +static int qcom_edp_ldo_config_v6(const struct qcom_edp *edp) +{ + const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts; + u32 ldo_config; + + if (!edp->is_edp) + ldo_config = 0x0; + else if (dp_opts->link_rate <= 2700) + ldo_config = 0x51; + else + ldo_config = 0x91; + + writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG); + writel(dp_opts->lanes > 2 ? ldo_config : 0x00, edp->tx1 + TXn_LDO_CONFIG); + + return 0; +} + static const struct phy_ver_ops qcom_edp_phy_ops_v6 = { .com_power_on = qcom_edp_phy_power_on_v6, .com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v6, @@ -831,6 +897,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v6 = { .com_clk_fwd_cfg = qcom_edp_com_clk_fwd_cfg_v4, .com_configure_pll = qcom_edp_com_configure_pll_v6, .com_configure_ssc = qcom_edp_com_configure_ssc_v6, + .com_ldo_config = qcom_edp_ldo_config_v6, }; static struct qcom_edp_phy_cfg x1e80100_phy_cfg = { @@ -1011,6 +1078,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v8 = { .com_clk_fwd_cfg = qcom_edp_com_clk_fwd_cfg_v8, .com_configure_pll = qcom_edp_com_configure_pll_v8, .com_configure_ssc = qcom_edp_com_configure_ssc_v8, + .com_ldo_config = qcom_edp_ldo_config_v6, }; static struct qcom_edp_phy_cfg glymur_phy_cfg = { @@ -1026,7 +1094,6 @@ static int qcom_edp_phy_power_on(struct phy *phy) const struct qcom_edp *edp = phy_get_drvdata(phy); u32 bias0_en, drvr0_en, bias1_en, drvr1_en; unsigned long pixel_freq; - u8 ldo_config = 0x0; int ret; u32 val; u8 cfg1; @@ -1035,11 +1102,10 @@ static int qcom_edp_phy_power_on(struct phy *phy) if (ret) return ret; - if (edp->cfg->edp_swing_pre_emph_cfg && !edp->is_edp) - ldo_config = 0x1; + ret = edp->cfg->ver_ops->com_ldo_config(edp); + if (ret) + return ret; - writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG); - writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG); writel(0x00, edp->tx0 + TXn_LANE_MODE_1); writel(0x00, edp->tx1 + TXn_LANE_MODE_1); -- cgit v1.2.3 From 646ebdd3105809d84ed04aa9e92e47e89cc44502 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 10 Apr 2026 23:03:09 +0200 Subject: media: rc: ttusbir: fix inverted error logic We have to report ENOMEM if no buffer is allocated. Typo dropped a "!". Restore it. Fixes: 50acaad3d202 ("media: rc: ttusbir: respect DMA coherency rules") Cc: stable@vger.kernel.org Signed-off-by: Oliver Neukum Signed-off-by: Sean Young Signed-off-by: Hans Verkuil --- drivers/media/rc/ttusbir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/rc/ttusbir.c b/drivers/media/rc/ttusbir.c index 3848ad3a6b85..db2f6698a6c0 100644 --- a/drivers/media/rc/ttusbir.c +++ b/drivers/media/rc/ttusbir.c @@ -191,7 +191,7 @@ static int ttusbir_probe(struct usb_interface *intf, tt = kzalloc_obj(*tt); buffer = kzalloc(5, GFP_KERNEL); rc = rc_allocate_device(RC_DRIVER_IR_RAW); - if (!tt || !rc || buffer) { + if (!tt || !rc || !buffer) { ret = -ENOMEM; goto out; } -- cgit v1.2.3 From 52ac35b8a151446481496404af3a8e5e889b3c5a Mon Sep 17 00:00:00 2001 From: Maulik Shah Date: Tue, 28 Apr 2026 17:44:58 +0530 Subject: pinctrl: qcom: Fix wakeirq map by removing disconnected irqs for sm8150 PDC interrupts 122-125 were meant for ibi_i3c wakeup but sm8150 do not support i3c. GPIOs 39,51,88 and 144 are also connected to different PDC pin and already reflected in the wake irq map. Remove the unsupported wakeup interrupts from the map. Fixes: 90337380c809 ("pinctrl: qcom: sm8150: Specify PDC map") Reviewed-by: Konrad Dybcio Signed-off-by: Maulik Shah Signed-off-by: Navya Malempati Signed-off-by: Linus Walleij --- drivers/pinctrl/qcom/pinctrl-sm8150.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-sm8150.c b/drivers/pinctrl/qcom/pinctrl-sm8150.c index 0767261f5149..12713671243c 100644 --- a/drivers/pinctrl/qcom/pinctrl-sm8150.c +++ b/drivers/pinctrl/qcom/pinctrl-sm8150.c @@ -1493,18 +1493,18 @@ static const struct msm_gpio_wakeirq_map sm8150_pdc_map[] = { { 3, 31 }, { 5, 32 }, { 8, 33 }, { 9, 34 }, { 10, 100 }, { 12, 104 }, { 24, 37 }, { 26, 38 }, { 27, 41 }, { 28, 42 }, { 30, 39 }, { 36, 43 }, { 37, 44 }, { 38, 30 }, { 39, 118 }, - { 39, 125 }, { 41, 47 }, { 42, 48 }, { 46, 50 }, { 47, 49 }, - { 48, 51 }, { 49, 53 }, { 50, 52 }, { 51, 116 }, { 51, 123 }, + { 41, 47 }, { 42, 48 }, { 46, 50 }, { 47, 49 }, + { 48, 51 }, { 49, 53 }, { 50, 52 }, { 51, 116 }, { 53, 54 }, { 54, 55 }, { 55, 56 }, { 56, 57 }, { 58, 58 }, { 60, 60 }, { 61, 61 }, { 68, 62 }, { 70, 63 }, { 76, 71 }, { 77, 66 }, { 81, 64 }, { 83, 65 }, { 86, 67 }, { 87, 84 }, - { 88, 117 }, { 88, 124 }, { 90, 69 }, { 91, 70 }, { 93, 75 }, + { 88, 117 }, { 90, 69 }, { 91, 70 }, { 93, 75 }, { 95, 72 }, { 96, 73 }, { 97, 74 }, { 101, 40 }, { 103, 77 }, { 104, 78 }, { 108, 79 }, { 112, 80 }, { 113, 81 }, { 114, 82 }, { 117, 85 }, { 118, 101 }, { 119, 87 }, { 120, 88 }, { 121, 89 }, { 122, 90 }, { 123, 91 }, { 124, 92 }, { 125, 93 }, { 129, 94 }, { 132, 105 }, { 133, 83 }, { 134, 36 }, { 136, 97 }, { 142, 103 }, - { 144, 115 }, { 144, 122 }, { 147, 102 }, { 150, 107 }, + { 144, 115 }, { 147, 102 }, { 150, 107 }, { 152, 108 }, { 153, 109 } }; -- cgit v1.2.3 From 3974ea1938406f9bfa7c1f48d4e43533f447bb08 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:30 +0100 Subject: firmware: arm_ffa: Bound PARTITION_INFO_GET_REGS copies The register-based PARTITION_INFO_GET path trusted the firmware-provided indices when copying partition descriptors into the caller buffer. Reject inconsistent counts or index progressions so the copy loop cannot write past the allocated array. Fixes: ba85c644ac8d ("firmware: arm_ffa: Add support for FFA_PARTITION_INFO_GET_REGS") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-6-8595ae450034@kernel.org (fixed cur_idx when exactly one descriptor in the first fragment) Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 29 +++++++++++++++++++++++------ 1 file changed, 23 insertions(+), 6 deletions(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index a122814eb6d7..33b417e78684 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -323,6 +323,12 @@ __ffa_partition_info_get(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3, #define PART_INFO_ID_MASK GENMASK(15, 0) #define PART_INFO_EXEC_CXT_MASK GENMASK(31, 16) #define PART_INFO_PROPS_MASK GENMASK(63, 32) +#define FFA_PART_INFO_GET_REGS_FIRST_REG 3 +#define FFA_PART_INFO_GET_REGS_REGS_PER_DESC 3 +#define FFA_PART_INFO_GET_REGS_MAX_DESC \ + (((sizeof(ffa_value_t) / sizeof_field(ffa_value_t, a0)) - \ + FFA_PART_INFO_GET_REGS_FIRST_REG) / \ + FFA_PART_INFO_GET_REGS_REGS_PER_DESC) #define PART_INFO_ID(x) ((u16)(FIELD_GET(PART_INFO_ID_MASK, (x)))) #define PART_INFO_EXEC_CXT(x) ((u16)(FIELD_GET(PART_INFO_EXEC_CXT_MASK, (x)))) #define PART_INFO_PROPERTIES(x) ((u32)(FIELD_GET(PART_INFO_PROPS_MASK, (x)))) @@ -330,15 +336,13 @@ static int __ffa_partition_info_get_regs(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3, struct ffa_partition_info *buffer, int num_parts) { - u16 buf_sz, start_idx, cur_idx, count = 0, prev_idx = 0, tag = 0; + u16 buf_sz, start_idx = 0, cur_idx, count = 0, tag = 0; struct ffa_partition_info *buf = buffer; ffa_value_t partition_info; do { __le64 *regs; - int idx; - - start_idx = prev_idx ? prev_idx + 1 : 0; + int idx, nr_desc, buf_idx; invoke_ffa_fn((ffa_value_t){ .a0 = FFA_PARTITION_INFO_GET_REGS, @@ -354,15 +358,28 @@ __ffa_partition_info_get_regs(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3, count = PARTITION_COUNT(partition_info.a2); if (!buffer || !num_parts) /* count only */ return count; + if (count > num_parts) + return -EINVAL; cur_idx = CURRENT_INDEX(partition_info.a2); + if (cur_idx < start_idx || cur_idx >= count) + return -EINVAL; + + nr_desc = cur_idx - start_idx + 1; + if (nr_desc > FFA_PART_INFO_GET_REGS_MAX_DESC) + return -EINVAL; + + buf_idx = buf - buffer; + if (buf_idx + nr_desc > num_parts) + return -EINVAL; + tag = UUID_INFO_TAG(partition_info.a2); buf_sz = PARTITION_INFO_SZ(partition_info.a2); if (buf_sz > sizeof(*buffer)) buf_sz = sizeof(*buffer); regs = (void *)&partition_info.a3; - for (idx = 0; idx < cur_idx - start_idx + 1; idx++, buf++) { + for (idx = 0; idx < nr_desc; idx++, buf++) { union { uuid_t uuid; u64 regs[2]; @@ -380,7 +397,7 @@ __ffa_partition_info_get_regs(u32 uuid0, u32 uuid1, u32 uuid2, u32 uuid3, uuid_copy(&buf->uuid, &uuid_regs.uuid); regs += 3; } - prev_idx = cur_idx; + start_idx = cur_idx + 1; } while (cur_idx < (count - 1)); -- cgit v1.2.3 From 2af18f8e36b277730527cacc2256b1332f56aa28 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:31 +0100 Subject: firmware: arm_ffa: Keep framework RX release under lock The framework notification handler drops rx_lock before issuing FFA_RX_RELEASE, leaving a window where another RX-buffer user can start a new FF-A transaction before ownership has actually been returned to firmware. Move the FFA_RX_RELEASE calls so they execute while rx_lock is still held on both the kmemdup() failure path and the normal success path. While doing that, switch the handler to scoped_guard() to keep the critical section explicit. Fixes: 285a5ea0f542 ("firmware: arm_ffa: Add support for handling framework notifications") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-7-8595ae450034@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 29 +++++++++++++---------------- 1 file changed, 13 insertions(+), 16 deletions(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 33b417e78684..d1e70866a425 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -1492,25 +1492,22 @@ static void handle_fwk_notif_callbacks(u32 bitmap) if (!(bitmap & FRAMEWORK_NOTIFY_RX_BUFFER_FULL)) return; - mutex_lock(&drv_info->rx_lock); + scoped_guard(mutex, &drv_info->rx_lock) { + msg = drv_info->rx_buffer; + buf = kmemdup((void *)msg + msg->offset, msg->size, GFP_KERNEL); + if (!buf) { + ffa_rx_release(); + return; + } - msg = drv_info->rx_buffer; - buf = kmemdup((void *)msg + msg->offset, msg->size, GFP_KERNEL); - if (!buf) { - mutex_unlock(&drv_info->rx_lock); - return; + target = SENDER_ID(msg->send_recv_id); + if (msg->offset >= sizeof(*msg)) + uuid_copy(&uuid, &msg->uuid); + else + uuid_copy(&uuid, &uuid_null); + ffa_rx_release(); } - target = SENDER_ID(msg->send_recv_id); - if (msg->offset >= sizeof(*msg)) - uuid_copy(&uuid, &msg->uuid); - else - uuid_copy(&uuid, &uuid_null); - - mutex_unlock(&drv_info->rx_lock); - - ffa_rx_release(); - read_lock(&drv_info->notify_lock); cb_info = notifier_hnode_get_by_vmid_uuid(notify_id, target, &uuid); read_unlock(&drv_info->notify_lock); -- cgit v1.2.3 From 4a1cc9e96b311d2609a6f963a5e35bd4ae730d97 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:32 +0100 Subject: firmware: arm_ffa: Validate framework notification message layout Framework notifications carry an indirect message in the shared RX buffer. Validate the reported offset and size before using them, reject zero-length payloads, and ensure that any non-header payload starts at the UUID field rather than in the middle of the message header. Use the validated offset and size values for both kmemdup() and the UUID parsing path so malformed firmware data cannot drive an out-of-bounds read or an oversized allocation. Fixes: 285a5ea0f542 ("firmware: arm_ffa: Add support for handling framework notifications") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-8-8595ae450034@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index d1e70866a425..7287423faceb 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -1487,21 +1487,35 @@ static void handle_fwk_notif_callbacks(u32 bitmap) int notify_id = 0, target; struct ffa_indirect_msg_hdr *msg; struct notifier_cb_info *cb_info = NULL; + size_t min_offset = offsetof(struct ffa_indirect_msg_hdr, uuid); /* Only one framework notification defined and supported for now */ if (!(bitmap & FRAMEWORK_NOTIFY_RX_BUFFER_FULL)) return; scoped_guard(mutex, &drv_info->rx_lock) { + u32 offset, size; + msg = drv_info->rx_buffer; - buf = kmemdup((void *)msg + msg->offset, msg->size, GFP_KERNEL); + offset = msg->offset; + size = msg->size; + + if (!size || (offset != min_offset && offset < sizeof(*msg)) || + offset > drv_info->rxtx_bufsz || + size > drv_info->rxtx_bufsz - offset) { + pr_err("invalid framework notification message\n"); + ffa_rx_release(); + return; + } + + buf = kmemdup((void *)msg + offset, size, GFP_KERNEL); if (!buf) { ffa_rx_release(); return; } target = SENDER_ID(msg->send_recv_id); - if (msg->offset >= sizeof(*msg)) + if (offset >= sizeof(*msg)) uuid_copy(&uuid, &msg->uuid); else uuid_copy(&uuid, &uuid_null); -- cgit v1.2.3 From 0399e3f872ca3d78044bb715a73ea645806d2c7b Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:33 +0100 Subject: firmware: arm_ffa: Align RxTx buffer size before mapping Commit 83210251fd70 ("firmware: arm_ffa: Use the correct buffer size during RXTX_MAP") advertises PAGE_ALIGN(rxtx_bufsz) to firmware when mapping the buffers but the driver continues to stores the minimum FF-A buffer size in drv_info->rxtx_bufsz which is used elsewhere in the driver. Align the size before storing it so that the allocation, validation and FFA_RXTX_MAP all use the same buffer size. Fixes: 83210251fd70 ("firmware: arm_ffa: Use the correct buffer size during RXTX_MAP") Cc: Sebastian Ene Link: https://sashiko.dev/#/patchset/20260402113939.930221-1-sebastianene@google.com Reviewed-by: Sebastian Ene Link: https://patch.msgid.link/20260428-ffa_fixes-v2-9-8595ae450034@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 7287423faceb..66ed98e32bd6 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -2109,6 +2109,7 @@ static int __init ffa_init(void) rxtx_bufsz = SZ_4K; } + rxtx_bufsz = PAGE_ALIGN(rxtx_bufsz); drv_info->rxtx_bufsz = rxtx_bufsz; drv_info->rx_buffer = alloc_pages_exact(rxtx_bufsz, GFP_KERNEL); if (!drv_info->rx_buffer) { @@ -2124,7 +2125,7 @@ static int __init ffa_init(void) ret = ffa_rxtx_map(virt_to_phys(drv_info->tx_buffer), virt_to_phys(drv_info->rx_buffer), - PAGE_ALIGN(rxtx_bufsz) / FFA_PAGE_SIZE); + rxtx_bufsz / FFA_PAGE_SIZE); if (ret) { pr_err("failed to register FFA RxTx buffers\n"); goto free_pages; -- cgit v1.2.3 From 38290b180a4d5746baed796d49f88d56d2f336cd Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:34 +0100 Subject: firmware: arm_ffa: Snapshot notifier callbacks under lock Both notification handlers currently look up a notifier callback under notify_lock, drop the lock, and then dereference the returned notifier entry. A concurrent unregister can delete and free that entry in the gap, leaving the handler to dereference stale memory. Copy the callback pointer and callback data while notify_lock is still held and invoke the callback only after the lock is dropped. This keeps the existing callback execution model while removing the use-after-free window in both the framework and non-framework notification paths. Fixes: 285a5ea0f542 ("firmware: arm_ffa: Add support for handling framework notifications") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-10-8595ae450034@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 35 +++++++++++++++++++++++------------ 1 file changed, 23 insertions(+), 12 deletions(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 66ed98e32bd6..98ead7ed28ca 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -1463,20 +1463,25 @@ static int ffa_notify_send(struct ffa_device *dev, int notify_id, static void handle_notif_callbacks(u64 bitmap, enum notify_type type) { + ffa_notifier_cb cb; + void *cb_data; int notify_id; - struct notifier_cb_info *cb_info = NULL; for (notify_id = 0; notify_id <= FFA_MAX_NOTIFICATIONS && bitmap; notify_id++, bitmap >>= 1) { if (!(bitmap & 1)) continue; - read_lock(&drv_info->notify_lock); - cb_info = notifier_hnode_get_by_type(notify_id, type); - read_unlock(&drv_info->notify_lock); + scoped_guard(read_lock, &drv_info->notify_lock) { + struct notifier_cb_info *cb_info; + + cb_info = notifier_hnode_get_by_type(notify_id, type); + cb = cb_info ? cb_info->cb : NULL; + cb_data = cb_info ? cb_info->cb_data : NULL; + } - if (cb_info && cb_info->cb) - cb_info->cb(notify_id, cb_info->cb_data); + if (cb) + cb(notify_id, cb_data); } } @@ -1484,9 +1489,10 @@ static void handle_fwk_notif_callbacks(u32 bitmap) { void *buf; uuid_t uuid; + void *fwk_cb_data; int notify_id = 0, target; + ffa_fwk_notifier_cb fwk_cb; struct ffa_indirect_msg_hdr *msg; - struct notifier_cb_info *cb_info = NULL; size_t min_offset = offsetof(struct ffa_indirect_msg_hdr, uuid); /* Only one framework notification defined and supported for now */ @@ -1522,12 +1528,17 @@ static void handle_fwk_notif_callbacks(u32 bitmap) ffa_rx_release(); } - read_lock(&drv_info->notify_lock); - cb_info = notifier_hnode_get_by_vmid_uuid(notify_id, target, &uuid); - read_unlock(&drv_info->notify_lock); + scoped_guard(read_lock, &drv_info->notify_lock) { + struct notifier_cb_info *cb_info; + + cb_info = notifier_hnode_get_by_vmid_uuid(notify_id, target, + &uuid); + fwk_cb = cb_info ? cb_info->fwk_cb : NULL; + fwk_cb_data = cb_info ? cb_info->cb_data : NULL; + } - if (cb_info && cb_info->fwk_cb) - cb_info->fwk_cb(notify_id, cb_info->cb_data, buf); + if (fwk_cb) + fwk_cb(notify_id, fwk_cb_data, buf); kfree(buf); } -- cgit v1.2.3 From a6848a50404eefb6f0b131c21881a2d8d21b31a9 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Tue, 28 Apr 2026 19:33:35 +0100 Subject: firmware: arm_ffa: Fix sched-recv callback partition lookup ffa_sched_recv_cb_update() used list_for_each_entry_safe() to search for a matching partition and then tested the iterator against NULL. That is not a valid end-of-list check for circular lists and can fall through with an invalid pointer. Use a normal iterator and detect the not-found case correctly before touching the partition state. Fixes: be61da938576 ("firmware: arm_ffa: Allow multiple UUIDs per partition to register SRI callback") Link: https://patch.msgid.link/20260428-ffa_fixes-v2-11-8595ae450034@kernel.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index 98ead7ed28ca..b9f17fda7243 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -1207,7 +1207,7 @@ static int ffa_sched_recv_cb_update(struct ffa_device *dev, ffa_sched_recv_cb callback, void *cb_data, bool is_registration) { - struct ffa_dev_part_info *partition = NULL, *tmp; + struct ffa_dev_part_info *partition = NULL; struct list_head *phead; bool cb_valid; @@ -1220,11 +1220,11 @@ ffa_sched_recv_cb_update(struct ffa_device *dev, ffa_sched_recv_cb callback, return -EINVAL; } - list_for_each_entry_safe(partition, tmp, phead, node) + list_for_each_entry(partition, phead, node) if (partition->dev == dev) break; - if (!partition) { + if (&partition->node == phead) { pr_err("%s: No such partition ID 0x%x\n", __func__, dev->vm_id); return -EINVAL; } -- cgit v1.2.3 From 90d77b30a666049ad24df463f52e5d529c44e8cd Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 5 May 2026 21:15:37 +0200 Subject: ARM: integrator: Fix early initialization Starting with commit bdb249fce9ad4 ("ARM: integrator: read counter using syscon/regmap"), intcp_init_early calls syscon_regmap_lookup_by_compatible which in turn calls of_syscon_register. This function allocates memory. Since the memory management code has not been initialized at that time, the call always fails. It either returns -ENOMEM or crashes as follows. Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read [0000000c] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc5-00026-g5fcc9bf84ee5 #1 PREEMPT Hardware name: ARM Integrator/CP (Device Tree) PC is at __kmalloc_cache_noprof+0xec/0x39c LR is at __kmalloc_cache_noprof+0x34/0x39c ... Call trace: __kmalloc_cache_noprof from of_syscon_register+0x7c/0x310 of_syscon_register from device_node_get_regmap+0xa4/0xb0 device_node_get_regmap from intcp_init_early+0xc/0x40 intcp_init_early from start_kernel+0x60/0x688 start_kernel from 0x0 The crash is seen due to a dereferenced pointer which is not supposed to be NULL but is NULL if the memory management subsystem has not been initialized. The crash is not seen with all versions of gcc. Some versions such as gcc 9.x apparently do not dereference the pointer, presumably if tracing is disabled. The problem has been reproduced with gcc 10.x, 11.x, and 13.x. Either case, if the crash is not seen, the call to syscon_regmap_lookup_by_compatible returns -ENOMEM, and sched_clock_register is never called. Fix the problem by moving the early initialization code into the standard machine initialization code. Fixes: bdb249fce9ad4 ("ARM: integrator: read counter using syscon/regmap") Cc: Linus Walleij Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/20250518164118.3859567-1-linux@roeck-us.net Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20260505-integrator-fixes-v1-1-56ab9aac59db@kernel.org Signed-off-by: Arnd Bergmann --- arch/arm/mach-versatile/integrator_cp.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-versatile/integrator_cp.c b/arch/arm/mach-versatile/integrator_cp.c index 2ed4ded56b3f..03dfb5f720b7 100644 --- a/arch/arm/mach-versatile/integrator_cp.c +++ b/arch/arm/mach-versatile/integrator_cp.c @@ -86,14 +86,6 @@ static u64 notrace intcp_read_sched_clock(void) return val; } -static void __init intcp_init_early(void) -{ - cm_map = syscon_regmap_lookup_by_compatible("arm,core-module-integrator"); - if (IS_ERR(cm_map)) - return; - sched_clock_register(intcp_read_sched_clock, 32, 24000000); -} - static void __init intcp_init_irq_of(void) { cm_init(); @@ -119,6 +111,10 @@ static void __init intcp_init_of(void) { struct device_node *cpcon; + cm_map = syscon_regmap_lookup_by_compatible("arm,core-module-integrator"); + if (!IS_ERR(cm_map)) + sched_clock_register(intcp_read_sched_clock, 32, 24000000); + cpcon = of_find_matching_node(NULL, intcp_syscon_match); if (!cpcon) return; @@ -138,7 +134,6 @@ static const char * intcp_dt_board_compat[] = { DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") .reserve = integrator_reserve, .map_io = intcp_map_io, - .init_early = intcp_init_early, .init_irq = intcp_init_irq_of, .init_machine = intcp_init_of, .dt_compat = intcp_dt_board_compat, -- cgit v1.2.3 From 856540ac9b441a8c0e39f1f1787277edc4097c9b Mon Sep 17 00:00:00 2001 From: Yu-Chun Lin Date: Tue, 5 May 2026 18:39:53 +0800 Subject: MAINTAINERS: Add maintainers for ARM/REALTEK ARCHITECTURE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add James Tai and Yu-Chun Lin as co-maintainers for the ARM/REALTEK ARCHITECTURE to continue supporting Realtek SoCs. Additionally, based on the discussion, move Andreas Färber to a reviewer role and update his email address accordingly. Link: https://lore.kernel.org/lkml/bbabf0f1-99fa-4822-85c8-df76ce89da01@suse.com/ Reviewed-by: Krzysztof Kozlowski Acked-by: James Tai Signed-off-by: Yu-Chun Lin Link: https://lore.kernel.org/r/20260505103955.1010130-2-eleanor.lin@realtek.com Signed-off-by: Arnd Bergmann --- MAINTAINERS | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 882214b0e7db..18c9b6dce479 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3361,7 +3361,9 @@ F: drivers/irqchip/irq-rda-intc.c F: drivers/tty/serial/rda-uart.c ARM/REALTEK ARCHITECTURE -M: Andreas Färber +M: James Tai +M: Yu-Chun Lin +R: Andreas Färber L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-realtek-soc@lists.infradead.org (moderated for non-subscribers) S: Maintained -- cgit v1.2.3 From 79524bed532bc7acd7d5209a6cdd0a17dbb8e65b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Tue, 5 May 2026 18:58:37 +0800 Subject: ARM: realtek: MAINTAINERS: Include pin controller drivers No dedicated maintainers are shown for Realtek SoC pin controllers, except pinctrl subsystem maintainer, which means reduced review and impression of abandoned drivers. Pin controller drivers are essential part of an SoC, so in case of lack of dedicated entry at least cover it by the SoC platform maintainers. Acked-by: Yu-Chun Lin Signed-off-by: Krzysztof Kozlowski Signed-off-by: Yu-Chun Lin Link: https://lore.kernel.org/r/20260505105838.1014771-2-eleanor.lin@realtek.com Signed-off-by: Arnd Bergmann --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 18c9b6dce479..984cb4252f38 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3371,6 +3371,7 @@ F: Documentation/devicetree/bindings/arm/realtek.yaml F: arch/arm/boot/dts/realtek/ F: arch/arm/mach-realtek/ F: arch/arm64/boot/dts/realtek/ +F: drivers/pinctrl/realtek/ ARM/RISC-V/RENESAS ARCHITECTURE M: Geert Uytterhoeven -- cgit v1.2.3 From 7602c0ec0bbfd3985d49f4f0cad281c1414008c9 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Wed, 31 Dec 2025 21:51:26 +0530 Subject: firmware: psci: Set pm_set_resume/suspend_via_firmware() for SYSTEM_SUSPEND PSCI specification defines the SYSTEM_SUSPEND feature which enables the firmware to implement the suspend to RAM (S2RAM) functionality by transitioning the system to a deeper low power state. When the system enters such state, the power to the peripheral devices might be removed. So the respective device drivers must prepare for the possible removal of the power by performing actions such as shutting down or resetting the device in their system suspend callbacks. The Linux PM framework allows the platform drivers to convey this info to device drivers by calling the pm_set_suspend_via_firmware() and pm_set_resume_via_firmware() APIs. Hence, if the PSCI firmware supports SYSTEM_SUSPEND feature, call the above mentioned APIs in the psci_system_suspend_begin() and psci_system_suspend_enter() callbacks. Signed-off-by: Konrad Dybcio Reviewed-by: Sudeep Holla [mani: reworded the description to be more elaborative] Signed-off-by: Manivannan Sadhasivam Tested-by: Jon Hunter Acked-by: Jon Hunter Acked-by: Lorenzo Pieralisi Signed-off-by: Arnd Bergmann --- drivers/firmware/psci/psci.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/firmware/psci/psci.c b/drivers/firmware/psci/psci.c index 38ca190d4a22..e73bae6cb23a 100644 --- a/drivers/firmware/psci/psci.c +++ b/drivers/firmware/psci/psci.c @@ -539,12 +539,22 @@ static int psci_system_suspend(unsigned long unused) static int psci_system_suspend_enter(suspend_state_t state) { + pm_set_resume_via_firmware(); + return cpu_suspend(0, psci_system_suspend); } +static int psci_system_suspend_begin(suspend_state_t state) +{ + pm_set_suspend_via_firmware(); + + return 0; +} + static const struct platform_suspend_ops psci_suspend_ops = { .valid = suspend_valid_only_mem, .enter = psci_system_suspend_enter, + .begin = psci_system_suspend_begin, }; static void __init psci_init_system_reset2(void) -- cgit v1.2.3 From 9228169d2ae055ed09a163887fc59a710a5eb73b Mon Sep 17 00:00:00 2001 From: K Prateek Nayak Date: Fri, 8 May 2026 05:17:43 +0000 Subject: cpufreq/amd-pstate: Grab "amd_pstate_driver_lock" when toggling dynamic_epp Concurrently changing driver mode and dynamic_epp with: echo passive > /sys/devices/system/cpu/amd_pstate/status& echo disable > /sys/devices/system/cpu/amd_pstate/dynamic_epp& hits the WARN_ON_ONCE() in static_key_disable_cpuslocked() and hangs the system since both sysfs writes are trying to do amd_pstate_change_driver_mode() without any synchronization. Grab the "amd_pstate_driver_lock" mutex when modifying "dynamic_epp" to prevent the two paths from racing with each other. Add a lockdep assertion for "amd_pstate_driver_lock" in amd_pstate_change_driver_mode() to formalize the dependency. Since "cppc_mode" is stable under "amd_pstate_driver_lock", only reload the driver when in "AMD_PSTATE_ACTIVE" mode and reject all writes when in passive or guided mode, or if the driver is not loaded, since only active mode operates on EPP. Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello Signed-off-by: K Prateek Nayak Link: https://lore.kernel.org/r/20260508051748.10484-2-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) --- drivers/cpufreq/amd-pstate.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 453084c67327..5e2d28c73294 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -1707,6 +1707,8 @@ static int amd_pstate_change_driver_mode(int mode) { int ret; + lockdep_assert_held(&amd_pstate_driver_lock); + ret = amd_pstate_unregister_driver(0); if (ret) return ret; @@ -1821,6 +1823,13 @@ static ssize_t dynamic_epp_store(struct device *a, struct device_attribute *b, if (ret) return ret; + guard(mutex)(&amd_pstate_driver_lock); + + if (cppc_state != AMD_PSTATE_ACTIVE) { + pr_debug("dynamic_epp can only be toggled in active mode\n"); + return -EINVAL; + } + if (dynamic_epp == enabled) return -EINVAL; -- cgit v1.2.3 From 87d2a8dec0f02b200eb3527da0ab11ba4d4e7deb Mon Sep 17 00:00:00 2001 From: K Prateek Nayak Date: Fri, 8 May 2026 05:17:44 +0000 Subject: cpufreq/amd-pstate: Return -ENOMEM on failure to allocate profile_name Failure to allocate profile name will return -EINVAL from platform_profile_register() while in fact, it is a failure to allocate memory for the profile_name string. Return -ENOMEM when kasprintf() fails to allocate profile_name string. Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello Signed-off-by: K Prateek Nayak Link: https://lore.kernel.org/r/20260508051748.10484-3-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) --- drivers/cpufreq/amd-pstate.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 5e2d28c73294..72514be2f30f 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -1291,6 +1291,8 @@ static int amd_pstate_set_dynamic_epp(struct cpufreq_policy *policy) return ret; cpudata->profile_name = kasprintf(GFP_KERNEL, "amd-pstate-epp-cpu%d", cpudata->cpu); + if (!cpudata->profile_name) + return -ENOMEM; cpudata->ppdev = platform_profile_register(get_cpu_device(policy->cpu), cpudata->profile_name, -- cgit v1.2.3 From c5eed6ddc757e477f52b3d99bfde9e59975c72ca Mon Sep 17 00:00:00 2001 From: K Prateek Nayak Date: Fri, 8 May 2026 05:17:45 +0000 Subject: cpufreq/amd-pstate: Allow writes to dynamic_epp when state isn't modified Writing the current "dynamic_epp" state to sysfs fails with -EINVAL even though the desired result was achieved. Allow writes to "dynamic_epp" that does not modify the state. Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello Signed-off-by: K Prateek Nayak Link: https://lore.kernel.org/r/20260508051748.10484-4-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) --- drivers/cpufreq/amd-pstate.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 72514be2f30f..462ddad7bc79 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -1832,8 +1832,9 @@ static ssize_t dynamic_epp_store(struct device *a, struct device_attribute *b, return -EINVAL; } + /* Nothing to do */ if (dynamic_epp == enabled) - return -EINVAL; + return count; /* reinitialize with desired dynamic EPP value */ dynamic_epp = enabled; -- cgit v1.2.3 From f3acf7ff113007557538b278ccb0e4ab7ae513ea Mon Sep 17 00:00:00 2001 From: K Prateek Nayak Date: Fri, 8 May 2026 05:17:46 +0000 Subject: cpufreq/amd-pstate: Reorder notifier unregistration and floor perf reset An active power supply notifier can race with amd_pstate_epp_cpu_exit() trying to reset the floor perf and can overwrite the floor perf set in MSR_AMD_CPPC_REQ. Unregister the notifier before setting the floor perf to prevent the rare race. Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello Signed-off-by: K Prateek Nayak Link: https://lore.kernel.org/r/20260508051748.10484-5-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) --- drivers/cpufreq/amd-pstate.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 462ddad7bc79..175925762a93 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -1982,12 +1982,13 @@ static void amd_pstate_epp_cpu_exit(struct cpufreq_policy *policy) if (cpudata) { union perf_cached perf = READ_ONCE(cpudata->perf); + if (cpudata->dynamic_epp) + amd_pstate_clear_dynamic_epp(policy); + /* Reset CPPC_REQ MSR to the BIOS value */ amd_pstate_update_perf(policy, perf.bios_min_perf, 0U, 0U, 0U, false); amd_pstate_set_floor_perf(policy, cpudata->bios_floor_perf); - if (cpudata->dynamic_epp) - amd_pstate_clear_dynamic_epp(policy); kfree(cpudata); policy->driver_data = NULL; } -- cgit v1.2.3 From caa822d312be54e3fe1a3b52c887e0888e149c12 Mon Sep 17 00:00:00 2001 From: K Prateek Nayak Date: Fri, 8 May 2026 05:17:47 +0000 Subject: cpufreq/amd-pstate: Use "epp_default_dc" as default when dynamic_epp is disabled If "dynamic_epp" is disabled, the driver initialization and the default EPP selection from sysfs currently sets the EPP based on the power supply state of the system at that time but there is no power supply callbacks registered to toggle it when the power supply state changes. This can lead to faster battery drain on platforms that start off while being plugged to the wall but later move to battery power since the EPP stays at AMD_CPPC_EPP_PERFORMANCE. Use "epp_default_dc" as the default EPP selection when dynamic_epp is disabled, restoring older behavior. On servers, this defaults to AMD_CPPC_EPP_PERFORMANCE and on other platforms, it defaults to AMD_CPPC_EPP_BALANCE_PERFORMANCE. Fixes: e30ca6dd5345 ("cpufreq/amd-pstate: Add dynamic energy performance preference") Reviewed-by: Mario Limonciello Signed-off-by: K Prateek Nayak Link: https://lore.kernel.org/r/20260508051748.10484-6-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) --- drivers/cpufreq/amd-pstate.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 175925762a93..9eb9c3f4e809 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -1429,7 +1429,7 @@ ssize_t store_energy_performance_preference(struct cpufreq_policy *policy, if (ret) epp = epp_values[ret]; else - epp = amd_pstate_get_balanced_epp(policy); + epp = cpudata->epp_default_dc; } if (cpudata->policy == CPUFREQ_POLICY_PERFORMANCE) { @@ -1954,7 +1954,7 @@ static int amd_pstate_epp_cpu_init(struct cpufreq_policy *policy) if (dynamic_epp) ret = amd_pstate_set_dynamic_epp(policy); else - ret = amd_pstate_set_epp(policy, amd_pstate_get_balanced_epp(policy)); + ret = amd_pstate_set_epp(policy, cpudata->epp_default_dc); if (ret) goto free_cpudata1; -- cgit v1.2.3 From f9f16835d4dc46113c0a72625ffbf61f1aa95e5c Mon Sep 17 00:00:00 2001 From: K Prateek Nayak Date: Fri, 8 May 2026 05:17:48 +0000 Subject: cpufreq/amd-pstate-ut: Drop policy reference before driver switch Recent changes to the EPP unit test tries to perform a driver switch with a cpufreq_policy reference held when the driver is loaded into anything but the active mode which leads to a circular dependency and the unit test hanging indefinitely. Drop the reference before driver switch and grab it back once the driver mode is stabilized for the test. The EPP writes are only possible with CPUFREQ_POLICY_POWERSAVE policy. Temporarily switch the cpudata->policy (while holding the write end of the policy->rwsem) to CPUFREQ_POLICY_POWERSAVE and restore the original policy once tests are done. To ensure the final EPP is correct in case the driver started with CPUFREQ_POLICY_PERFORMANCE, EPP performance is tested last. The __free() based cleanup for cpufreq_policy is lost in the process. Reported-by: Kalpana Shetty Fixes: 7e173bc310d2b ("cpufreq/amd-pstate-ut: Add a unit test for raw EPP") Reviewed-by: Mario Limonciello Signed-off-by: K Prateek Nayak Link: https://lore.kernel.org/r/20260508051748.10484-7-kprateek.nayak@amd.com Signed-off-by: Mario Limonciello (AMD) --- drivers/cpufreq/amd-pstate-ut.c | 36 +++++++++++++++++++++++++++++------- 1 file changed, 29 insertions(+), 7 deletions(-) diff --git a/drivers/cpufreq/amd-pstate-ut.c b/drivers/cpufreq/amd-pstate-ut.c index aa8a464fab47..13a23dac477d 100644 --- a/drivers/cpufreq/amd-pstate-ut.c +++ b/drivers/cpufreq/amd-pstate-ut.c @@ -274,20 +274,21 @@ static int amd_pstate_set_mode(enum amd_pstate_mode mode) static int amd_pstate_ut_epp(u32 index) { - struct cpufreq_policy *policy __free(put_cpufreq_policy) = NULL; - char *buf __free(cleanup_page) = NULL; static const char * const epp_strings[] = { - "performance", - "balance_performance", - "balance_power", "power", + "balance_power", + "balance_performance", + "performance", }; - struct amd_cpudata *cpudata; + char *buf __free(cleanup_page) = NULL; + struct cpufreq_policy *policy = NULL; enum amd_pstate_mode orig_mode; + struct amd_cpudata *cpudata; + unsigned long orig_policy; bool orig_dynamic_epp; int ret, cpu = 0; - int i; u16 epp; + int i; policy = cpufreq_cpu_get(cpu); if (!policy) @@ -297,6 +298,10 @@ static int amd_pstate_ut_epp(u32 index) orig_mode = amd_pstate_get_status(); orig_dynamic_epp = cpudata->dynamic_epp; + /* Drop reference before potential driver change. */ + cpufreq_cpu_put(policy); + policy = NULL; + /* disable dynamic EPP before running test */ if (cpudata->dynamic_epp) { pr_debug("Dynamic EPP is enabled, disabling it\n"); @@ -311,6 +316,17 @@ static int amd_pstate_ut_epp(u32 index) if (ret) goto out; + policy = cpufreq_cpu_get(cpu); + if (!policy) { + ret = -ENODEV; + goto out; + } + + down_write(&policy->rwsem); + cpudata = policy->driver_data; + orig_policy = cpudata->policy; + cpudata->policy = CPUFREQ_POLICY_POWERSAVE; + for (epp = 0; epp <= U8_MAX; epp++) { u8 val; @@ -358,6 +374,12 @@ static int amd_pstate_ut_epp(u32 index) ret = 0; out: + if (policy) { + cpudata->policy = orig_policy; + up_write(&policy->rwsem); + cpufreq_cpu_put(policy); + } + if (orig_dynamic_epp) { int ret2; -- cgit v1.2.3 From 7666dbb1bacc4ba522b96740cba7283d243d16e1 Mon Sep 17 00:00:00 2001 From: John Walker Date: Thu, 7 May 2026 17:07:20 -0600 Subject: wifi: cfg80211: advance loop vars in cfg80211_merge_profile() cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS profile that has been split across multiple consecutive MBSSID elements. Its while-loop calls cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem) but never advances mbssid_elem or sub_elem inside the body. Each iteration therefore searches for a continuation that follows the same fixed pair; the helper returns the same next_mbssid; and the same next_sub bytes are memcpy()'d into merged_ie at a growing offset until the buffer fills. Advance both mbssid_elem and sub_elem to the just-consumed continuation so the next call to cfg80211_get_profile_continuation() searches for a further continuation beyond it (or returns NULL when none exists). A specially-crafted malicious beacon can take advantage of this bug to cause the kernel to spend an excessive amount of time in cfg80211_merge_profile (up to as much as 2ms per beacon received), which could theoretically be abused in some way. Cc: stable@vger.kernel.org Fixes: fe806e4992c9 ("cfg80211: support profile split between elements") Signed-off-by: John Walker Link: https://patch.msgid.link/20260507230720.64783-1-johnwalker0@gmail.com Signed-off-by: Johannes Berg --- net/wireless/scan.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 328af43ef832..358cbc9e43d8 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -2462,6 +2462,9 @@ size_t cfg80211_merge_profile(const u8 *ie, size_t ielen, memcpy(merged_ie + copied_len, next_sub->data, next_sub->datalen); copied_len += next_sub->datalen; + + mbssid_elem = next_mbssid; + sub_elem = next_sub; } return copied_len; -- cgit v1.2.3 From 47773fa85e470e9896a22a99ccd5b5930d469680 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Thu, 30 Apr 2026 20:54:47 +0900 Subject: ntfs: use base mft_no when looking up base inode for extent record When the mft record is an extent record, ntfs_may_write_mft_record() looks up its base inode in the icache. The hash key passed to find_inode_nowait() must be the base inode's mft number (na.mft_no, set just above to MREF_LE(m->base_mft_record)), but the code passes @mft_no, the extent record's own number. find_inode_nowait() uses its second argument as the hashval, so the lookup lands in the wrong bucket and almost always returns NULL. ntfs_may_write_mft_record() then returns false and the writeback path (ntfs_write_mft_block()) skips that extent record, leaving the on-disk copy permanently out of sync with the in-memory one. The original ilookup5_nowait() call this conversion replaced used na.mft_no. Restore that. Fixes: 115380f9a2f9 ("ntfs: update mft operations") Signed-off-by: DaeMyung Kang Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/mft.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index 7d989267a82b..ef423303565d 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -833,7 +833,7 @@ static bool ntfs_may_write_mft_record(struct ntfs_volume *vol, const u64 mft_no, vi = igrab(mft_vi); WARN_ON(vi != mft_vi); } else { - vi = find_inode_nowait(sb, mft_no, ntfs_test_inode_wb, &na); + vi = find_inode_nowait(sb, na.mft_no, ntfs_test_inode_wb, &na); if (na.state == NI_BeingDeleted || na.state == NI_BeingCreated) return false; } -- cgit v1.2.3 From 49c12bee2bb2604e82a997521175b85ca5421685 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Fri, 1 May 2026 02:20:54 +0900 Subject: ntfs: redirty folio when ntfs_write_mft_block() runs out of memory ntfs_write_mft_block() is called by writeback_iter() with the folio locked. When the per-call allocations for @locked_nis or @ref_inos fail, the function returns -ENOMEM directly without unlocking the folio. Any later task that needs the folio's lock then stalls, and the folio's dirty state is silently lost from the writeback iterator's point of view. Use folio_redirty_for_writepage() so the folio remains dirty for a subsequent writeback pass, unlock it, and only then return -ENOMEM so the caller can propagate the error to fsync()/sync_filesystem(). Fixes: f462fdf3d6a4 ("ntfs: reduce stack usage in ntfs_write_mft_block()") Signed-off-by: DaeMyung Kang Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/mft.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index ef423303565d..f5017f337068 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -2721,8 +2721,11 @@ static int ntfs_write_mft_block(struct folio *folio, struct writeback_control *w ntfs_debug("Entering for inode 0x%llx, attribute type 0x%x, folio index 0x%lx.", ni->mft_no, ni->type, folio->index); - if (!locked_nis || !ref_inos) + if (!locked_nis || !ref_inos) { + folio_redirty_for_writepage(wbc, folio); + folio_unlock(folio); return -ENOMEM; + } /* We have to zero every time due to mmap-at-end-of-file. */ if (folio->index >= (i_size >> folio_shift(folio))) -- cgit v1.2.3 From 618c991cdf031925b09cbb1117f613abdb068680 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Fri, 1 May 2026 02:20:55 +0900 Subject: ntfs: capture mft mirror sync errors in ntfs_write_mft_block() After ntfs_sync_mft_mirror() became able to return real I/O errors, ntfs_write_mft_block() still discards its return value at the call site inside the per-record loop. A failed $MFTMirr write therefore leaves the volume looking clean from the writeback path even though the on-disk mirror is now stale. Capture the return value and feed it into the function's existing @err variable using the same "first error wins" pattern already used on other failure paths. The error is propagated to the caller and, via the existing tail of the function, sets NVolErrors so umount and chkdsk see the volume as inconsistent. Fixes: 115380f9a2f9 ("ntfs: update mft operations") Signed-off-by: DaeMyung Kang Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/mft.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index f5017f337068..f5186a19dffc 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -2843,9 +2843,13 @@ flush_bio: } prev_mft_ofs = mft_ofs; - if (mft_no < vol->mftmirr_size) - ntfs_sync_mft_mirror(vol, mft_no, + if (mft_no < vol->mftmirr_size) { + int sub_err = ntfs_sync_mft_mirror(vol, mft_no, (struct mft_record *)(kaddr + mft_ofs)); + + if (unlikely(sub_err) && !err) + err = sub_err; + } } else if (ref_inos[nr_ref_inos]) nr_ref_inos++; } -- cgit v1.2.3 From 563d0d4c2c1dc1f3f84104c78b388d0490c0086f Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Fri, 1 May 2026 02:20:53 +0900 Subject: ntfs: wait for sync mft writes to complete ntfs_sync_mft_mirror() and write_mft_record_nolock() with @sync set are both documented as synchronous, but neither actually waits for the bio they submit nor inspects bi_status. write_inode() can return success while dirty mft record bytes are still in flight, and bio errors are silently dropped: the volume is not marked with errors and the inode is not redirtied. This breaks fsync()/sync metadata durability. Switch ntfs_sync_mft_mirror() and the @sync path of write_mft_record_nolock() to submit_bio_wait() and propagate the returned error to the caller. Capture ntfs_sync_mft_mirror()'s return value at its call sites in write_mft_record_nolock() so a mirror write failure surfaces too. The @sync parameter only controls the main MFT bio. The !@sync main submission is therefore unchanged and still uses ntfs_bio_end_io() to drop the folio reference taken before submission. The mirror call has always been documented as performing synchronous I/O regardless of @sync, so making it actually block restores the originally intended contract for both @sync and !@sync callers. Note this only fixes the synchronous mirror/main paths reachable from write_mft_record_nolock(). The main MFT write submitted from ntfs_write_mft_block() (the .writepages path) still does not wait for completion or check bi_status; that requires a larger restructuring and is left to a follow-up patch. Fixes: 115380f9a2f9 ("ntfs: update mft operations") Signed-off-by: DaeMyung Kang Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/mft.c | 63 ++++++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 41 insertions(+), 22 deletions(-) diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index f5186a19dffc..68f6fc8b7b62 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -449,7 +449,7 @@ static void ntfs_bio_end_io(struct bio *bio) int ntfs_sync_mft_mirror(struct ntfs_volume *vol, const u64 mft_no, struct mft_record *m) { - u8 *kmirr = NULL; + u8 *kmirr; struct folio *folio; unsigned int folio_ofs, lcn_folio_off = 0; int err = 0; @@ -479,6 +479,7 @@ int ntfs_sync_mft_mirror(struct ntfs_volume *vol, const u64 mft_no, kmirr = kmap_local_folio(folio, 0) + folio_ofs; /* Copy the mst protected mft record to the mirror. */ memcpy(kmirr, m, vol->mft_record_size); + kunmap_local(kmirr); if (vol->cluster_size_bits > PAGE_SHIFT) { lcn_folio_off = folio->index << PAGE_SHIFT; @@ -490,20 +491,22 @@ int ntfs_sync_mft_mirror(struct ntfs_volume *vol, const u64 mft_no, NTFS_B_TO_SECTOR(vol, NTFS_CLU_TO_B(vol, vol->mftmirr_lcn) + lcn_folio_off + folio_ofs); - if (!bio_add_folio(bio, folio, vol->mft_record_size, folio_ofs)) { + if (bio_add_folio(bio, folio, vol->mft_record_size, folio_ofs)) + err = submit_bio_wait(bio); + else err = -EIO; - bio_put(bio); - goto unlock_folio; - } + bio_put(bio); - bio->bi_end_io = ntfs_bio_end_io; - submit_bio(bio); - /* Current state: all buffers are clean, unlocked, and uptodate. */ + /* + * The in-memory mirror is now valid because we just memcpy()'d the + * mst-protected mft record into it. Mark the folio uptodate even on + * write error so a subsequent read_mapping_folio() does not refetch + * the stale on-disk mirror and overwrite this copy. The error is + * propagated to the caller via @err. + */ folio_mark_uptodate(folio); -unlock_folio: folio_unlock(folio); - kunmap_local(kmirr); folio_put(folio); if (likely(!err)) { ntfs_debug("Done."); @@ -588,20 +591,36 @@ int write_mft_record_nolock(struct ntfs_inode *ni, struct mft_record *m, int syn } /* Synchronize the mft mirror now if not @sync. */ - if (!sync && ni->mft_no < vol->mftmirr_size) - ntfs_sync_mft_mirror(vol, ni->mft_no, fixup_m); + if (!sync && ni->mft_no < vol->mftmirr_size) { + int sub_err = ntfs_sync_mft_mirror(vol, ni->mft_no, + fixup_m); + if (unlikely(sub_err) && !err) + err = sub_err; + } - folio_get(folio); - bio->bi_private = folio; - bio->bi_end_io = ntfs_bio_end_io; - submit_bio(bio); + if (sync) { + int sub_err = submit_bio_wait(bio); + + bio_put(bio); + if (unlikely(sub_err) && !err) + err = sub_err; + } else { + folio_get(folio); + bio->bi_private = folio; + bio->bi_end_io = ntfs_bio_end_io; + submit_bio(bio); + } offset += vol->cluster_size; i++; } /* If @sync, now synchronize the mft mirror. */ - if (sync && ni->mft_no < vol->mftmirr_size) - ntfs_sync_mft_mirror(vol, ni->mft_no, fixup_m); + if (sync && ni->mft_no < vol->mftmirr_size) { + int sub_err = ntfs_sync_mft_mirror(vol, ni->mft_no, fixup_m); + + if (unlikely(sub_err) && !err) + err = sub_err; + } kunmap_local(kaddr); if (unlikely(err)) { /* I/O error during writing. This is really bad! */ @@ -617,10 +636,10 @@ put_bio_out: bio_put(bio); err_out: /* - * Current state: all buffers are clean, unlocked, and uptodate. - * The caller should mark the base inode as bad so that no more i/o - * happens. ->drop_inode() will still be invoked so all extent inodes - * and other allocated memory will be freed. + * The caller should mark the base inode as bad so no more I/O + * happens. ->drop_inode() will still be invoked so all extent inodes + * and other allocated memory will be freed. ENOMEM is retried by + * redirtying the mft record below. */ if (err == -ENOMEM) { ntfs_error(vol->sb, -- cgit v1.2.3 From f3c8cd8a63683f53a4e0247ef2b3cdc5132e97fa Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Sat, 2 May 2026 09:48:52 +0900 Subject: ntfs: fix copy length in ntfs_bdev_write() for non-page-aligned start This is not a normal data I/O hot path. The single in-tree caller is the $LogFile emptying path used during read-write mount/remount, and the bug only becomes visible on NTFS volumes whose cluster_size is strictly smaller than the kernel's PAGE_SIZE (typically 4 KiB on x86_64). Per Microsoft's format command documentation, NTFS supports allocation unit sizes starting at 512 bytes, so 512 B, 1 KiB and 2 KiB clusters are uncommon but valid on-disk configurations. When cluster_size >= PAGE_SIZE every "start" passed in is page-aligned and the buggy "from != 0" path is never taken. ntfs_bdev_write() splits the write across one or more block-device folios. Inside the loop, "to" is computed as the *end byte offset* within the current page (0..PAGE_SIZE), and "from" is the start byte offset within the page (reset to 0 from the second iteration onward). The copy length should therefore be "to - from", but the current code uses "to" directly: to = min_t(u32, end - offset, PAGE_SIZE); memcpy_to_folio(folio, from, buf + buf_off, to); buf_off += to; When "from != 0" (i.e. "start" is not page-aligned) memcpy_to_folio() copies "from" extra bytes: - it reads "from" bytes past the source buffer into kernel heap; - it writes "from" bytes past the requested range into the next part of the block-device page (or, if "from + to > PAGE_SIZE", past the folio boundary entirely, which trips the VM_BUG_ON inside memcpy_to_folio() on CONFIG_DEBUG_VM=y kernels). "buf_off" is then advanced by the wrong amount, so every subsequent iteration also reads the source buffer at the wrong offset and writes the wrong content to disk. ntfs_empty_logfile() calls ntfs_bdev_write(sb, empty_buf, NTFS_CLU_TO_B(vol, lcn), vol->cluster_size); with empty_buf sized to vol->cluster_size. On a sub-PAGE_SIZE-cluster volume, any $LogFile run whose LCN is not aligned to PAGE_SIZE / cluster_size reaches the non-page-aligned path. The over-copy can read beyond empty_buf and overwrite the sectors following the requested cluster in the block-device page with unrelated kernel heap contents while $LogFile is being emptied. A userspace reducer of the same arithmetic and copy loop confirms the bug under AddressSanitizer: ASan reports a heap-buffer-overflow read past the source buffer for the buggy length, and the fixed version is ASan-clean. Compute the copy length as "to - from" and advance buf_off by the same amount. Fixes: 5218cd102aec ("ntfs: update misc operations") Link: https://learn.microsoft.com/en-us/windows-server/administration/windows-commands/format Signed-off-by: DaeMyung Kang Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/bdev-io.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/ntfs/bdev-io.c b/fs/ntfs/bdev-io.c index 67e65c88d681..27d7c2767a33 100644 --- a/fs/ntfs/bdev-io.c +++ b/fs/ntfs/bdev-io.c @@ -97,6 +97,8 @@ int ntfs_bdev_write(struct super_block *sb, void *buf, loff_t start, size_t size idx_end++; for (; idx < idx_end; idx++, from = 0) { + u32 len; + folio = read_mapping_folio(sb->s_bdev->bd_mapping, idx, NULL); if (IS_ERR(folio)) { ntfs_error(sb, "Unable to read %ld page", idx); @@ -105,9 +107,10 @@ int ntfs_bdev_write(struct super_block *sb, void *buf, loff_t start, size_t size offset = (loff_t)idx << PAGE_SHIFT; to = min_t(u32, end - offset, PAGE_SIZE); + len = to - from; - memcpy_to_folio(folio, from, buf + buf_off, to); - buf_off += to; + memcpy_to_folio(folio, from, buf + buf_off, len); + buf_off += len; folio_mark_uptodate(folio); folio_mark_dirty(folio); folio_put(folio); -- cgit v1.2.3 From 6c30af0b203e7d7f63f70df1f2c4694c1e5ed589 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Sat, 2 May 2026 09:49:16 +0900 Subject: ntfs: avoid use-after-free of index inode in ntfs_inode_sync_filename() ntfs_inode_sync_filename() walks every FILE_NAME attribute and, for each one that points at a different parent, opens the parent index inode with ntfs_iget() and locks index_ni->mrec_lock. All three error branches (NInoBeingDeleted, ntfs_index_ctx_get failure, ntfs_index_lookup failure) drop the parent reference before unlocking: iput(index_vi); mutex_unlock(&index_ni->mrec_lock); continue; index_ni is NTFS_I(index_vi), so the ntfs_inode (and its mrec_lock) is embedded in the inode allocation. If the parent directory is not held outside the icache - no open dentry, recently evicted from dcache, no other concurrent lookup - ntfs_iget() returns with i_count == 1 and our iput() drops the last reference. evict_inode() then runs and destroy_inode() schedules the slab object for RCU free, while mutex_unlock() on the next line is still touching index_ni->mrec_lock. Swap the order so the mutex is dropped while index_vi is still alive, matching the success path at the bottom of the loop which already unlocks before iput(). Reproduced under KASAN with a debug build that forces ntfs_index_ctx_get() to fail when the parent index inode has been opened with i_count == 1. KASAN reports a slab-use-after-free read on the parent's mrec_lock from mutex_unlock() on the writeback worker: BUG: KASAN: slab-use-after-free in __mutex_unlock_slowpath+0xb5/0x970 Read of size 8 at addr ffff8880014b7598 by task kworker/u8:0/12 Workqueue: writeback wb_workfn (flush-253:0) Call Trace: mutex_unlock ntfs_inode_sync_filename __ntfs_write_inode ntfs_write_inode __writeback_single_inode Allocated by task 103: ntfs_alloc_big_inode ntfs_iget ntfs_lookup __x64_sys_mkdir Freed by task 12: ntfs_free_big_inode i_callback rcu_do_batch Last potentially related work creation: call_rcu destroy_inode evict dispose_list evict_inodes ntfs_inode_sync_filename __ntfs_write_inode The buggy address belongs to the object at ffff8880014b7440 which belongs to the cache ntfs_big_inode_cache of size 1800 The freed object is the parent directory inode itself: allocated by mkdir(2) via ntfs_iget(), then released through call_rcu(i_callback) that destroy_inode() scheduled when evict_inodes() ran from inside ntfs_inode_sync_filename(). Re-running the same workload with mutex_unlock() moved before iput() runs cleanly under KASAN. Fixes: af0db57d4293 ("ntfs: update inode operations") Signed-off-by: DaeMyung Kang Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/inode.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c index 16890d411194..360bebd1ee3f 100644 --- a/fs/ntfs/inode.c +++ b/fs/ntfs/inode.c @@ -2582,8 +2582,8 @@ int ntfs_inode_sync_filename(struct ntfs_inode *ni) mutex_lock_nested(&index_ni->mrec_lock, NTFS_INODE_MUTEX_PARENT); if (NInoBeingDeleted(ni)) { - iput(index_vi); mutex_unlock(&index_ni->mrec_lock); + iput(index_vi); continue; } @@ -2591,8 +2591,8 @@ int ntfs_inode_sync_filename(struct ntfs_inode *ni) if (!ictx) { ntfs_error(sb, "Failed to get index ctx, inode %llu", index_ni->mft_no); - iput(index_vi); mutex_unlock(&index_ni->mrec_lock); + iput(index_vi); continue; } @@ -2601,8 +2601,8 @@ int ntfs_inode_sync_filename(struct ntfs_inode *ni) ntfs_debug("Index lookup failed, inode %llu", index_ni->mft_no); ntfs_index_ctx_put(ictx); - iput(index_vi); mutex_unlock(&index_ni->mrec_lock); + iput(index_vi); continue; } /* Update flags and file size. */ -- cgit v1.2.3 From de08874bae7db49d77085a34b62ebb491ea68e2e Mon Sep 17 00:00:00 2001 From: Hyunchul Lee Date: Mon, 4 May 2026 20:03:14 +0900 Subject: ntfs: match ntfs_resident_attr_min_value_length with $AttrDef Update ntfs_resident_attr_min_value_length() to align with $AttrDef. The $VOLUME_NAME is allowed to have the size of 0. The Windows 11 $AttrDef values are as follows: Attribute Name (ID) Size (Min-Max) Flags $STANDARD_INFORMATION (16) 48-72 Resident $ATTRIBUTE_LIST (32) No Limit Non-resident $FILE_NAME (48) 68-578 Resident, Index $OBJECT_ID (64) 0-256 Resident $SECURITY_DESCRIPTOR (80) No Limit Non-resident $VOLUME_NAME (96) 2-256 Resident $VOLUME_INFORMATION (112) 12-12 Resident $DATA (128) No Limit (None) $INDEX_ROOT (144) No Limit Resident $INDEX_ALLOCATION (160) No Limit Non-resident $BITMAP (176) No Limit Non-resident $REPARSE_POINT (192) 0-16384 Non-resident $EA_INFORMATION (208) 8-8 Resident $EA (224) 0-65536 (None) $LOGGED_UTILITY_STREAM (256) 0-65536 Non-resident Reported-by: woot000 Signed-off-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/attrib.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c index 97b660eaa00c..7ab3571cc5f9 100644 --- a/fs/ntfs/attrib.c +++ b/fs/ntfs/attrib.c @@ -583,24 +583,13 @@ static u32 ntfs_resident_attr_min_value_length(const __le32 type) case AT_STANDARD_INFORMATION: return offsetof(struct standard_information, ver) + sizeof(((struct standard_information *)0)->ver.v1.reserved12); - case AT_ATTRIBUTE_LIST: - return offsetof(struct attr_list_entry, name); case AT_FILE_NAME: - return offsetof(struct file_name_attr, file_name); - case AT_OBJECT_ID: - return sizeof(struct guid); - case AT_SECURITY_DESCRIPTOR: - return sizeof(struct security_descriptor_relative); + return offsetof(struct file_name_attr, file_name) + + sizeof(__le16) * 1; case AT_VOLUME_INFORMATION: return sizeof(struct volume_information); - case AT_INDEX_ROOT: - return sizeof(struct index_root); - case AT_REPARSE_POINT: - return offsetof(struct reparse_point, reparse_data); case AT_EA_INFORMATION: return sizeof(struct ea_information); - case AT_EA: - return offsetof(struct ea_attr, ea_name) + 1; default: return 0; } -- cgit v1.2.3 From 11f7a6d9d722aeb889f6363e4d07e9f0c54f1be1 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Tue, 5 May 2026 22:07:52 +0900 Subject: ntfs: fix default_upcase refcount underflow and UAF on fs_context teardown ntfs_init_fs_context() allocates a fresh ntfs_volume with vol->upcase left as NULL. ntfs_free_fs_context() unconditionally calls ntfs_volume_free() during fs_context teardown, even when ntfs_fill_super() never ran or already cleaned up. ntfs_volume_free() then executes: mutex_lock(&ntfs_lock); if (vol->upcase == default_upcase) { ntfs_nr_upcase_users--; vol->upcase = NULL; } When the global default_upcase is also NULL (very first mount attempt, or all prior mounts have released the table), the comparison is NULL == NULL, and ntfs_nr_upcase_users is decremented even though this volume never claimed a reference. ntfs_nr_upcase_users is unsigned long, so the decrement wraps to ULONG_MAX. A subsequent successful mount can then free the shared table while the mounted volume still points at it: 1. ntfs_fill_super() does the temporary ntfs_nr_upcase_users++ at the "Generate the global default upcase table if necessary" block. With the prior wraparound this brings the counter back to 0. 2. If the volume's $UpCase matches the default, the match path does ntfs_nr_upcase_users++ and sets vol->upcase = default_upcase. The counter is now 1. 3. On the success path, !--ntfs_nr_upcase_users evaluates true and default_upcase is kvfree()'d while vol->upcase still points at it. Subsequent upcase comparisons through that mount touch freed memory. This was reproduced with KASAN by closing a fresh fsopen("ntfs") context, then mounting an NTFS image whose $UpCase table matches generate_default_upcase(), and finally doing a case-insensitive lookup. KASAN reports the dangling vol->upcase access: BUG: KASAN: use-after-free in ntfs_collate_names+0x3b4/0x420 Read of size 2 at addr ffff888008d40048 by task init/1 ntfs_collate_names+0x3b4/0x420 ntfs_lookup_inode_by_name+0x1921/0x3130 ntfs_lookup+0x193/0xc40 vfs_statx+0xc7/0x190 vfs_fstatat+0x4b/0xa0 __do_sys_newfstatat+0x92/0xf0 The same QEMU reproducer was rerun after this change with KASAN enabled. It reached "reproducer finished", and the log contained no KASAN, use-after-free, Oops, or panic signatures. Guard each comparison with an explicit vol->upcase non-NULL check so a volume that never took a reference cannot decrement the global users counter. Apply the same guard to the other default_upcase release sites so all cleanup paths follow the same ownership rule: only volumes that actually hold a default_upcase reference may drop one. Fixes: 1e9ea7e04472 ("Revert "fs: Remove NTFS classic"") Signed-off-by: DaeMyung Kang Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/super.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c index 22dc7865eca7..e9de84fb8297 100644 --- a/fs/ntfs/super.c +++ b/fs/ntfs/super.c @@ -1671,7 +1671,7 @@ iput_attrdef_err_out: iput_upcase_err_out: vol->upcase_len = 0; mutex_lock(&ntfs_lock); - if (vol->upcase == default_upcase) { + if (vol->upcase && vol->upcase == default_upcase) { ntfs_nr_upcase_users--; vol->upcase = NULL; } @@ -1701,7 +1701,7 @@ static void ntfs_volume_free(struct ntfs_volume *vol) * the number of upcase users if we are a user. */ mutex_lock(&ntfs_lock); - if (vol->upcase == default_upcase) { + if (vol->upcase && vol->upcase == default_upcase) { ntfs_nr_upcase_users--; vol->upcase = NULL; } @@ -2494,7 +2494,7 @@ static int ntfs_fill_super(struct super_block *sb, struct fs_context *fc) } vol->upcase_len = 0; mutex_lock(&ntfs_lock); - if (vol->upcase == default_upcase) { + if (vol->upcase && vol->upcase == default_upcase) { ntfs_nr_upcase_users--; vol->upcase = NULL; } -- cgit v1.2.3 From c37d9e68b6766f5e28057ee2ea3251b7ffe88e54 Mon Sep 17 00:00:00 2001 From: Namjae Jeon Date: Wed, 6 May 2026 20:36:37 +0900 Subject: ntfs: fix variable dereferenced before check ni in ntfs_attr_open() Smatch warnings: ntfs_attr_open() warn: variable dereferenced before check 'ni' Moves the ntfs_debug() call after the NULL pointer checks to ensure safe access to the structure members. Reported-by: kernel test robot Reported-by: Dan Carpenter Signed-off-by: Namjae Jeon --- fs/ntfs/attrib.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c index 7ab3571cc5f9..d60d0c686718 100644 --- a/fs/ntfs/attrib.c +++ b/fs/ntfs/attrib.c @@ -2913,12 +2913,12 @@ int ntfs_attr_open(struct ntfs_inode *ni, const __le32 type, struct ntfs_inode *base_ni; int err; - ntfs_debug("Entering for inode %lld, attr 0x%x.\n", - (unsigned long long)ni->mft_no, type); - if (!ni || !ni->vol) return -EINVAL; + ntfs_debug("Entering for inode %lld, attr 0x%x.\n", + ni->mft_no, type); + if (NInoAttr(ni)) base_ni = ni->ext.base_ntfs_ino; else -- cgit v1.2.3 From 11816f7131c876b911605a8dc8b0a8835ed0d715 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Wed, 6 May 2026 18:24:48 +0900 Subject: ntfs: fix out-of-bounds write in ntfs_rl_collapse_range() merge path ntfs_rl_collapse_range() merges the run on the left of the collapsed region with the run on its right when they are contiguous. The contiguous check chooses a clamped index when @new_1st_cnt is 0: i = new_1st_cnt == 0 ? 1 : new_1st_cnt; if (ntfs_rle_lcn_contiguous(&new_rl[i - 1], &new_rl[i])) { but the merge itself uses the unclamped value: s_rl = &new_rl[new_1st_cnt - 1]; s_rl->length += s_rl[1].length; When @new_1st_cnt is 0 this computes &new_rl[-1] and writes 8 bytes before the kvcalloc() runlist buffer. The path is reachable through fallocate(FALLOC_FL_COLLAPSE_RANGE) starting at vcn 0 against an attribute whose first run after the collapsed region and the following run are holes. In that case ntfs_rle_lcn_contiguous() returns true because both checked entries are LCN_HOLE, so the merge path is entered with @new_1st_cnt still 0. Such consecutive holes do not occur on a well-formed runlist (NTFS keeps runlists coalesced in memory), so this OOB path is only reachable from a crafted volume. A normal runlist has no element to the left of vcn 0, so the left/right merge is not valid when @new_1st_cnt is 0. Require @new_1st_cnt to be positive before checking or performing the merge. This skips the merge entirely in that case instead of clamping the merge target. The out-of-bounds write can corrupt an adjacent slab object. On a non-KASAN kernel, it is reachable after a crafted NTFS volume has been mounted read-write with the legacy fs/ntfs driver, by a local user that has write access to the crafted file. Fixes: 11ccc9107dc4 ("ntfs: update runlist handling and cluster allocator") Suggested-by: Hyunchul Lee Signed-off-by: DaeMyung Kang Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/runlist.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/ntfs/runlist.c b/fs/ntfs/runlist.c index da21dbeaaf66..e7de3d01257e 100644 --- a/fs/ntfs/runlist.c +++ b/fs/ntfs/runlist.c @@ -2056,10 +2056,11 @@ struct runlist_element *ntfs_rl_collapse_range(struct runlist_element *dst_rl, i * consists of holes. */ merge_cnt = 0; - i = new_1st_cnt == 0 ? 1 : new_1st_cnt; - if (ntfs_rle_lcn_contiguous(&new_rl[i - 1], &new_rl[i])) { - /* Merge right and left */ - s_rl = &new_rl[new_1st_cnt - 1]; + if (new_1st_cnt > 0 && + ntfs_rle_lcn_contiguous(&new_rl[new_1st_cnt - 1], + &new_rl[new_1st_cnt])) { + /* Merge right and left. */ + s_rl = &new_rl[new_1st_cnt - 1]; s_rl->length += s_rl[1].length; merge_cnt = 1; } -- cgit v1.2.3 From 79629b748ae2f7c19a562b83e8055499765dea89 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Thu, 7 May 2026 11:18:31 +0900 Subject: ntfs: fix out-of-bounds write in ntfs_index_walk_down() ntfs_index_walk_down() used to update the index traversal depth directly before writing parent_pos[] and parent_vcn[]. A malformed directory index with too many child-node levels can therefore advance pindex past MAX_PARENT_VCN and write past the fixed arrays in struct ntfs_index_context, corrupting context state used by later index traversal. Use ntfs_icx_parent_inc() for walk-down transitions so the existing depth limit is enforced before the arrays are updated. Make the helper check the limit before incrementing pindex so failed callers do not leave the context at an out-of-range depth. This is reachable by iterating a crafted NTFS directory after the volume has been mounted, including read-only mounts. The reproducer uses getdents64() on an index root that points to an excessively deep chain of child index blocks. A crafted directory index with a chain of child-node entries reproduced UBSAN array-index-out-of-bounds reports in ntfs_index_walk_down() and subsequent KASAN reports in ntfs_index_walk_up(). With this change, the same image is rejected with "Index is over 32 level deep" and no KASAN or UBSAN report is emitted. Fixes: 0a8ac0c1fa0b ("ntfs: update directory operations") Suggested-by: Namjae Jeon Signed-off-by: DaeMyung Kang Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/index.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/fs/ntfs/index.c b/fs/ntfs/index.c index a547bdcfa456..146e011c1a41 100644 --- a/fs/ntfs/index.c +++ b/fs/ntfs/index.c @@ -677,11 +677,11 @@ static int ntfs_ib_read(struct ntfs_index_context *icx, s64 vcn, struct index_bl static int ntfs_icx_parent_inc(struct ntfs_index_context *icx) { - icx->pindex++; - if (icx->pindex >= MAX_PARENT_VCN) { + if (icx->pindex >= MAX_PARENT_VCN - 1) { ntfs_error(icx->idx_ni->vol->sb, "Index is over %d level deep", MAX_PARENT_VCN); return -EOPNOTSUPP; } + icx->pindex++; return 0; } @@ -1970,6 +1970,7 @@ struct index_entry *ntfs_index_walk_down(struct index_entry *ie, struct ntfs_ind { struct index_entry *entry; struct index_block *ib; + int err; s64 vcn; entry = ie; @@ -1979,14 +1980,20 @@ struct index_entry *ntfs_index_walk_down(struct index_entry *ie, struct ntfs_ind ib = kvzalloc(ictx->block_size, GFP_NOFS); if (!ib) return ERR_PTR(-ENOMEM); - /* down from level zero */ + /* + * Descending from root index (level 0) to the first + * child level. is_in_root == true implies pindex == 0, + * so advance to level 1. + */ + ictx->pindex = 1; ictx->ir = NULL; ictx->ib = ib; - ictx->pindex = 1; ictx->is_in_root = false; } else { /* down from non-zero level */ - ictx->pindex++; + err = ntfs_icx_parent_inc(ictx); + if (err) + return ERR_PTR(err); } ictx->parent_pos[ictx->pindex] = 0; -- cgit v1.2.3 From 3086c49a075f144536db0268ad307e63a8e1dbdb Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Fri, 8 May 2026 00:48:52 +0900 Subject: ntfs: avoid leaking uninitialised bytes in new security descriptors ntfs_sd_add_everyone() builds the on-disk security descriptor for a newly created file by kmalloc()'ing a buffer and then partially filling it in: sd = kmalloc(sd_len, GFP_NOFS); ... sd->revision = 1; sd->control = SE_DACL_PRESENT | SE_SELF_RELATIVE; ... The buffer is then handed to ntfs_attr_add() and persisted as the SECURITY_DESCRIPTOR attribute of the new MFT record. The descriptor covers a relative security descriptor header, two SIDs (owner and group), an ACL header, and a single ACE, but several fields inside those structures are never written before the buffer is committed to disk: - struct security_descriptor_relative @alignment (1 byte) @sacl (4 bytes; SE_SACL_PRESENT is not set but the offset still reaches disk) - struct ntfs_sid (3 instances: owner, group, ACE.sid) identifier_authority.value[0..4] (5 bytes per SID, 15 total - only value[5] is set) - struct ntfs_acl @alignment1 (1 byte) @alignment2 (2 bytes) That is 23 bytes of uninitialised slab memory persisted to disk for every new file or directory the legacy ntfs driver creates. The "+ 4" trailing accounting in sd_len holds ace->sid.sub_authority[0], which the existing code does explicitly write to zero, so it is not part of the leak. Anything later able to read the SECURITY_DESCRIPTOR attribute - the same NTFS volume mounted on Windows or by another NTFS reader, an offline forensics tool, an unprivileged user that ends up with read access to the volume - can recover those bytes. The leak persists for the lifetime of the file on disk, not just the lifetime of the kernel that wrote it. Switch the allocation to kzalloc() so every byte the on-disk descriptor covers is zero before the explicit initialisations run. While there, replace the bare "return -1" allocation-failure path with a proper -ENOMEM so the error reaches userspace as a meaningful errno instead of an unrelated -EPERM. Found by inspection while auditing fs/ntfs new-inode paths. Fixes: af0db57d4293 ("ntfs: update inode operations") Signed-off-by: DaeMyung Kang Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/namei.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ntfs/namei.c b/fs/ntfs/namei.c index 96c450e62efc..c4f82846c58c 100644 --- a/fs/ntfs/namei.c +++ b/fs/ntfs/namei.c @@ -344,9 +344,9 @@ static int ntfs_sd_add_everyone(struct ntfs_inode *ni) sd_len = sizeof(struct security_descriptor_relative) + 2 * (sizeof(struct ntfs_sid) + 8) + sizeof(struct ntfs_acl) + sizeof(struct ntfs_ace) + 4; - sd = kmalloc(sd_len, GFP_NOFS); + sd = kzalloc(sd_len, GFP_NOFS); if (!sd) - return -1; + return -ENOMEM; sd->revision = 1; sd->control = SE_DACL_PRESENT | SE_SELF_RELATIVE; -- cgit v1.2.3 From d1aabc2132d29224caa3c994dadd8224dc473ed9 Mon Sep 17 00:00:00 2001 From: Zhan Xusheng Date: Fri, 8 May 2026 15:29:34 +0800 Subject: ntfs: fix missing kstrdup() error check in ntfs_write_volume_label() ntfs_write_volume_label() does not check the return value of kstrdup(). If the allocation fails, vol->volume_label is set to NULL while the function returns success. A subsequent FS_IOC_GETFSLABEL then returns an empty string even though the on-disk label was updated correctly. Fix by allocating the new label before taking vol_ni->mrec_lock and updating any on-disk metadata, so an -ENOMEM from kstrdup() leaves both the in-memory and on-disk labels untouched and consistent. On success the preallocated copy replaces the old vol->volume_label. Also move mark_inode_dirty_sync() into the success path so that it is not called when no metadata was actually modified. Fixes: 6251f0b0de7d ("ntfs: update super block operations") Suggested-by: Hyunchul Lee Signed-off-by: Zhan Xusheng Reviewed-by: Hyunchul Lee Signed-off-by: Namjae Jeon --- fs/ntfs/super.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c index e9de84fb8297..d282cf6e712e 100644 --- a/fs/ntfs/super.c +++ b/fs/ntfs/super.c @@ -413,6 +413,7 @@ int ntfs_write_volume_label(struct ntfs_volume *vol, char *label) { struct ntfs_inode *vol_ni = NTFS_I(vol->vol_ino); struct ntfs_attr_search_ctx *ctx; + char *new_label; __le16 *uname; int uname_len, ret; @@ -425,7 +426,7 @@ int ntfs_write_volume_label(struct ntfs_volume *vol, char *label) return uname_len; } - if (uname_len > NTFS_MAX_LABEL_LEN) { + if (uname_len > NTFS_MAX_LABEL_LEN) { ntfs_error(vol->sb, "Volume label is too long (max %d characters).", NTFS_MAX_LABEL_LEN); @@ -433,11 +434,22 @@ int ntfs_write_volume_label(struct ntfs_volume *vol, char *label) return -EINVAL; } + /* + * Allocate the in-memory label copy up front. If kstrdup() fails we + * bail out before touching on-disk metadata, so the in-memory label + * and the on-disk label stay in sync. + */ + new_label = kstrdup(label, GFP_KERNEL); + if (!new_label) { + kvfree(uname); + return -ENOMEM; + } + mutex_lock(&vol_ni->mrec_lock); ctx = ntfs_attr_get_search_ctx(vol_ni, NULL); if (!ctx) { ret = -ENOMEM; - goto out; + goto out; } if (!ntfs_attr_lookup(AT_VOLUME_NAME, NULL, 0, 0, 0, NULL, 0, @@ -450,12 +462,14 @@ int ntfs_write_volume_label(struct ntfs_volume *vol, char *label) out: mutex_unlock(&vol_ni->mrec_lock); kvfree(uname); - mark_inode_dirty_sync(vol->vol_ino); if (ret >= 0) { kfree(vol->volume_label); - vol->volume_label = kstrdup(label, GFP_KERNEL); + vol->volume_label = new_label; + mark_inode_dirty_sync(vol->vol_ino); ret = 0; + } else { + kfree(new_label); } return ret; } -- cgit v1.2.3 From 6098790c403d5e95a35bb6bf938591ca8c8e224f Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Sat, 9 May 2026 15:12:35 +0900 Subject: ntfs: validate MFT attrs_offset against bytes_in_use ntfs_mft_record_check() verifies that attrs_offset is aligned and that the resulting pointer stays within the allocated MFT record buffer, but it does not check that the first attribute header starts within the bytes_in_use area. A malformed record with attrs_offset greater than bytes_in_use can pass this check as long as attrs_offset is still within bytes_allocated. The attribute parser then computes the remaining record space by subtracting the attribute pointer from bytes_in_use. Because that value is unsigned, the subtraction can underflow and allow bytes after bytes_in_use to be interpreted as an attribute. Reject records where attrs_offset is outside bytes_in_use or where the used area does not even contain the four-byte attribute type/AT_END terminator at attrs_offset. A small userspace model with attrs_offset=128 and bytes_in_use=64 shows the current check accepts the record and the parser space calculation underflows to 0xffffffc0. With this change the same malformed record is rejected before the attribute walker is entered. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: DaeMyung Kang Signed-off-by: Namjae Jeon --- fs/ntfs/mft.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index 68f6fc8b7b62..729b259974eb 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -30,6 +30,8 @@ int ntfs_mft_record_check(const struct ntfs_volume *vol, struct mft_record *m, { struct attr_record *a; struct super_block *sb = vol->sb; + u16 attrs_offset; + u32 bytes_in_use; if (!ntfs_is_file_record(m->magic)) { ntfs_error(sb, "Record %llu has no FILE magic (0x%x)\n", @@ -65,7 +67,16 @@ int ntfs_mft_record_check(const struct ntfs_volume *vol, struct mft_record *m, goto err_out; } - a = (struct attr_record *)((char *)m + le16_to_cpu(m->attrs_offset)); + attrs_offset = le16_to_cpu(m->attrs_offset); + bytes_in_use = le32_to_cpu(m->bytes_in_use); + + if (attrs_offset > bytes_in_use || + bytes_in_use - attrs_offset < sizeof_field(struct attr_record, type)) { + ntfs_error(sb, "Record %llu has corrupt attribute offset\n", mft_no); + goto err_out; + } + + a = (struct attr_record *)((char *)m + attrs_offset); if ((char *)a < (char *)m || (char *)a > (char *)m + vol->mft_record_size) { ntfs_error(sb, "Record %llu is corrupt\n", mft_no); goto err_out; -- cgit v1.2.3 From 679ee5afd5b4764911656b4d4b83b9abee2b5572 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Sat, 9 May 2026 15:12:36 +0900 Subject: ntfs: fix MFT bitmap scan 2^32 boundary check NTFS MFT record numbers are limited to the 32-bit range, and ntfs_mft_record_layout() rejects mft_no >= 2^32. The free-MFT-record bitmap scan in ntfs_mft_bitmap_find_and_alloc_free_rec_nolock() also guards against this overflow but uses a strict greater than comparison, allowing record number 2^32 itself through this earlier check. Every other 2^32 boundary check in fs/ntfs/mft.c uses '>=', so the strict greater than here is both a real off-by-one and an internal inconsistency. A model with ll == 2^32 confirms the current check accepts the value while the corrected check rejects it. Use '>=' so the boundary matches the layout-time rejection and the surrounding bitmap-scan checks. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: DaeMyung Kang Signed-off-by: Namjae Jeon --- fs/ntfs/mft.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index 729b259974eb..a7d10ee41b34 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -1064,7 +1064,7 @@ static s64 ntfs_mft_bitmap_find_and_alloc_free_rec_nolock(struct ntfs_volume *vo b = ffz((unsigned long)*byte); if (b < 8 && b >= (bit & 7)) { ll = data_pos + (bit & ~7ull) + b; - if (unlikely(ll > (1ll << 32))) { + if (unlikely(ll >= (1ll << 32))) { folio_unlock(folio); kunmap_local(buf); folio_put(folio); -- cgit v1.2.3 From b64f0ae5d47c0bd9581eb9cd59375a87f748dc00 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Sat, 9 May 2026 15:12:37 +0900 Subject: ntfs: validate attribute name bounds before returning it ntfs_attr_find() validates a named attribute before comparing it with the requested name, but that check is currently after the AT_UNUSED handling. When callers enumerate attributes with AT_UNUSED, ntfs_attr_find() can return a malformed named attribute before checking whether name_offset and name_length stay within the attribute record. Some enumeration callers use the returned attribute name pointer directly. For example, one path passes (attr + name_offset, name_length) to ntfs_attr_iget(), where the name can later be copied according to name_length. A malformed on-disk name_offset/name_length pair should not be exposed to those callers. Move the existing name bounds validation before returning attributes during AT_UNUSED enumeration, and write it as an offset/remaining-size check so the subtraction cannot underflow. Extract the converted values into local variables (name_offset, attr_len, name_size) to make the intent explicit and avoid repeating the endian conversions inside the bounds check. This keeps matching attributes on the same checked path while also covering attribute enumeration. A small userspace ASAN model with attr length=32, name_offset=124 and name_length=8 reproduces a heap-buffer-overflow read in the old enumeration path. With this change the same malformed attribute is rejected before the name pointer is returned to the caller. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: DaeMyung Kang Signed-off-by: Namjae Jeon --- fs/ntfs/attrib.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/fs/ntfs/attrib.c b/fs/ntfs/attrib.c index d60d0c686718..421c6cdcbb53 100644 --- a/fs/ntfs/attrib.c +++ b/fs/ntfs/attrib.c @@ -661,6 +661,9 @@ static int ntfs_attr_find(const __le32 type, const __le16 *name, __le16 *upcase = vol->upcase; u32 upcase_len = vol->upcase_len; unsigned int space; + u16 name_offset; + u32 attr_len; + u32 name_size; /* * Iterate over attributes in mft record starting at @ctx->attr, or the @@ -688,6 +691,20 @@ static int ntfs_attr_find(const __le32 type, const __le16 *name, return -ENOENT; if (unlikely(!a->length)) break; + if (a->name_length) { + name_offset = le16_to_cpu(a->name_offset); + attr_len = le32_to_cpu(a->length); + name_size = a->name_length * sizeof(__le16); + + if (name_offset > attr_len || + attr_len - name_offset < name_size) { + ntfs_error(vol->sb, + "Corrupt attribute name in MFT record %llu\n", + ctx->ntfs_ino->mft_no); + break; + } + } + if (type == AT_UNUSED) return 0; if (a->type != type) @@ -701,14 +718,6 @@ static int ntfs_attr_find(const __le32 type, const __le16 *name, if (a->name_length) return -ENOENT; } else { - if (a->name_length && ((le16_to_cpu(a->name_offset) + - a->name_length * sizeof(__le16)) > - le32_to_cpu(a->length))) { - ntfs_error(vol->sb, "Corrupt attribute name in MFT record %llu\n", - ctx->ntfs_ino->mft_no); - break; - } - if (!ntfs_are_names_equal(name, name_len, (__le16 *)((u8 *)a + le16_to_cpu(a->name_offset)), a->name_length, ic, upcase, upcase_len)) { -- cgit v1.2.3 From 8c16c1c00167134f15ca8e9defdf38b1cac08c36 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Sun, 10 May 2026 11:13:11 +0900 Subject: ntfs: fix empty_buf and ra lifetime bugs in ntfs_empty_logfile() ntfs_empty_logfile() has three related allocator bugs around the @empty_buf and @ra buffers it uses inside the per-cluster loop. When the loop encounters a runlist entry with LCN_RL_NOT_MAPPED, the function kvfrees @empty_buf and goes to map_vcn to remap. @empty_buf is not cleared. If ntfs_map_runlist_nolock() fails on re-entry, control jumps to the err label which kvfrees @empty_buf a second time. In the same branch, @ra is left allocated. When the remap succeeds the function falls through the @empty_buf re-allocation and the @ra re-allocation, overwriting the previous @ra pointer and leaking it. The success path frees @empty_buf with kfree() instead of kvfree(). kvzalloc() may fall back to vmalloc(), in which case kfree() does not correctly release the memory. A KASAN-enabled QEMU harness mirroring this control flow reports "BUG: KASAN: double-free" when the second ntfs_map_runlist_nolock() fails. Clear both @empty_buf and @ra after the in-loop releases so the err path is a no-op when the buffers have already been freed and so the remap-success path does not leak the previous @ra. Switch the success path to kvfree() to match the @empty_buf allocator. Fixes: 5218cd102aec ("ntfs: update misc operations") Signed-off-by: DaeMyung Kang Signed-off-by: Namjae Jeon --- fs/ntfs/logfile.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ntfs/logfile.c b/fs/ntfs/logfile.c index 3f8d1640f1d5..d3f25d8e29f9 100644 --- a/fs/ntfs/logfile.c +++ b/fs/ntfs/logfile.c @@ -710,6 +710,9 @@ map_vcn: if (unlikely(lcn == LCN_RL_NOT_MAPPED)) { vcn = rl->vcn; kvfree(empty_buf); + empty_buf = NULL; + kfree(ra); + ra = NULL; goto map_vcn; } /* If this run is not valid abort with an error. */ @@ -753,7 +756,7 @@ map_vcn: } while (start < end); } while ((++rl)->vcn < end_vcn); up_write(&log_ni->runlist.lock); - kfree(empty_buf); + kvfree(empty_buf); kfree(ra); truncate_inode_pages(log_vi->i_mapping, 0); /* Set the flag so we do not have to do it again on remount. */ -- cgit v1.2.3 From 91ddf6f722084383fb05be731c0107814b055c0c Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 21 Mar 2026 15:42:32 +0100 Subject: phy: marvell: mvebu-a3700-utmi: fix incorrect USB2_PHY_CTRL register access MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The mvebu_a3700_utmi_phy_power_off() function tries to modify the USB2_PHY_CTRL register by using the IO address of the PHY IP block along with the readl/writel IO accessors. However, the register exist in the USB miscellaneous register space, and as such it must be accessed via regmap like it is done in the mvebu_a3700_utmi_phy_power_on() function. Change the code to use regmap_update_bits() for modífying the register to fix this. Fixes: cc8b7a0ae866 ("phy: add A3700 UTMI PHY driver") Signed-off-by: Gabor Juhos Reviewed-by: Miquel Raynal Link: https://patch.msgid.link/20260321-a3700-utmi-fix-usb2_phy_ctrl-access-v1-1-6005ff4b5058@gmail.com Signed-off-by: Vinod Koul --- drivers/phy/marvell/phy-mvebu-a3700-utmi.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c index 04f4fb4bed70..f882bc57649c 100644 --- a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c +++ b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c @@ -168,9 +168,8 @@ static int mvebu_a3700_utmi_phy_power_off(struct phy *phy) u32 reg; /* Disable PHY pull-up and enable USB2 suspend */ - reg = readl(utmi->regs + USB2_PHY_CTRL(usb32)); - reg &= ~(RB_USB2PHY_PU | RB_USB2PHY_SUSPM(usb32)); - writel(reg, utmi->regs + USB2_PHY_CTRL(usb32)); + regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32), + RB_USB2PHY_PU | RB_USB2PHY_SUSPM(usb32), 0); /* Power down OTG module */ if (usb32) { -- cgit v1.2.3 From da110228b54f2e2143d97ea7151e0dc22e539d67 Mon Sep 17 00:00:00 2001 From: Wayne Chang Date: Mon, 4 May 2026 11:33:05 +0800 Subject: phy: tegra: xusb: Fix per-pad high-speed termination calibration The existing code reads a single hs_term_range_adj value from bit field [10:7] of FUSE_SKU_CALIB_0 and applies it to all USB2 pads uniformly. However, on SoCs that support per-pad termination, each pad has its own hs_term_range_adj field: pad 0 in FUSE_SKU_CALIB_0[10:7], and pads 1-3 in FUSE_USB_CALIB_EXT_0 at bit offsets [8:5], [12:9], and [16:13] respectively. Fix the calibration by reading per-pad values from the appropriate fuse registers. For SoCs that do not support per-pad termination, replicate pad 0's value to all pads to maintain existing behavior. Add a has_per_pad_term flag to the SoC data to indicate whether per-pad termination values are available in FUSE_USB_CALIB_EXT_0. Fixes: 1ef535c6ba8e ("phy: tegra: xusb: Add Tegra194 support") Cc: stable@vger.kernel.org Signed-off-by: Wayne Chang Signed-off-by: Wei-Cheng Chen Reviewed-by: Jon Hunter Tested-by: Jon Hunter Link: https://patch.msgid.link/20260504033305.2283145-1-weichengc@nvidia.com Signed-off-by: Vinod Koul --- drivers/phy/tegra/xusb-tegra186.c | 33 ++++++++++++++++++++++++++------- drivers/phy/tegra/xusb.h | 1 + 2 files changed, 27 insertions(+), 7 deletions(-) diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c index 1ddf11265974..60156aea2707 100644 --- a/drivers/phy/tegra/xusb-tegra186.c +++ b/drivers/phy/tegra/xusb-tegra186.c @@ -20,8 +20,8 @@ /* FUSE USB_CALIB registers */ #define HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? (11 + (x - 1) * 6) : 0) #define HS_CURR_LEVEL_PAD_MASK 0x3f -#define HS_TERM_RANGE_ADJ_SHIFT 7 -#define HS_TERM_RANGE_ADJ_MASK 0xf +#define HS_TERM_RANGE_ADJ_PADX_SHIFT(x) ((x) ? (5 + (x - 1) * 4) : 7) +#define HS_TERM_RANGE_ADJ_PAD_MASK 0xf #define HS_SQUELCH_SHIFT 29 #define HS_SQUELCH_MASK 0x7 @@ -253,7 +253,7 @@ struct tegra_xusb_fuse_calibration { u32 *hs_curr_level; u32 hs_squelch; - u32 hs_term_range_adj; + u32 *hs_term_range_adj; u32 rpd_ctrl; }; @@ -930,7 +930,7 @@ static int tegra186_utmi_phy_power_on(struct phy *phy) value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); value &= ~TERM_RANGE_ADJ(~0); - value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj); + value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj[index]); value &= ~RPD_CTRL(~0); value |= RPD_CTRL(priv->calib.rpd_ctrl); padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index)); @@ -1464,17 +1464,23 @@ static const char * const tegra186_usb3_functions[] = { static int tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl) { + const struct tegra_xusb_padctl_soc *soc = padctl->base.soc; struct device *dev = padctl->base.dev; unsigned int i, count; u32 value, *level; + u32 *hs_term_range_adj; int err; - count = padctl->base.soc->ports.usb2.count; + count = soc->ports.usb2.count; level = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL); if (!level) return -ENOMEM; + hs_term_range_adj = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL); + if (!hs_term_range_adj) + return -ENOMEM; + err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value); if (err) return dev_err_probe(dev, err, @@ -1490,8 +1496,8 @@ tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl) padctl->calib.hs_squelch = (value >> HS_SQUELCH_SHIFT) & HS_SQUELCH_MASK; - padctl->calib.hs_term_range_adj = (value >> HS_TERM_RANGE_ADJ_SHIFT) & - HS_TERM_RANGE_ADJ_MASK; + hs_term_range_adj[0] = (value >> HS_TERM_RANGE_ADJ_PADX_SHIFT(0)) & + HS_TERM_RANGE_ADJ_PAD_MASK; err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value); if (err) { @@ -1503,6 +1509,17 @@ tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl) padctl->calib.rpd_ctrl = (value >> RPD_CTRL_SHIFT) & RPD_CTRL_MASK; + for (i = 1; i < count; i++) { + if (soc->has_per_pad_term) + hs_term_range_adj[i] = + (value >> HS_TERM_RANGE_ADJ_PADX_SHIFT(i)) & + HS_TERM_RANGE_ADJ_PAD_MASK; + else + hs_term_range_adj[i] = hs_term_range_adj[0]; + } + + padctl->calib.hs_term_range_adj = hs_term_range_adj; + return 0; } @@ -1708,6 +1725,7 @@ const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc = { .num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names), .supports_gen2 = true, .poll_trk_completed = true, + .has_per_pad_term = true, }; EXPORT_SYMBOL_GPL(tegra194_xusb_padctl_soc); @@ -1732,6 +1750,7 @@ const struct tegra_xusb_padctl_soc tegra234_xusb_padctl_soc = { .trk_hw_mode = false, .trk_update_on_idle = true, .supports_lp_cfg_en = true, + .has_per_pad_term = true, }; EXPORT_SYMBOL_GPL(tegra234_xusb_padctl_soc); #endif diff --git a/drivers/phy/tegra/xusb.h b/drivers/phy/tegra/xusb.h index cd277d0ed9e1..77609e54de66 100644 --- a/drivers/phy/tegra/xusb.h +++ b/drivers/phy/tegra/xusb.h @@ -435,6 +435,7 @@ struct tegra_xusb_padctl_soc { bool trk_hw_mode; bool trk_update_on_idle; bool supports_lp_cfg_en; + bool has_per_pad_term; }; struct tegra_xusb_padctl { -- cgit v1.2.3 From 5a759b120e31aa3ed914d98b51eb1755235250f2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C5=81ukasz=20Lebiedzi=C5=84ski?= Date: Mon, 6 Apr 2026 15:56:27 +0200 Subject: phy: exynos5-usbdrd: fix USB 2.0 HS PHY tuning values for Exynos7870 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The existing PHYPARAM0 tuning values for Exynos7870 are incorrect, causing the USB 2.0 PHY to fail high-speed negotiation and fall back to full-speed (12Mbps) operation. Fix TXVREFTUNE (transmitter voltage reference) from 14 to 3, TXRESTUNE (transmitter impedance) from 3 to 2, and SQRXTUNE (squelch threshold) from 6 to 5. Also explicitly set TXPREEMPPULSETUNE to 0, which was previously missing from the tuning table despite being included in the register mask. All values are derived from the vendor kernel for the Samsung Galaxy A6 (SM-A600FN), as no public hardware documentation is available for the Exynos7870 USB DRD PHY. With these corrections, the PHY successfully negotiates high-speed (480Mbps) operation. Fixes: 588d5d20ca8d ("phy: exynos5-usbdrd: add exynos7870 USBDRD support") Cc: stable@vger.kernel.org Tested-by: Kaustabh Chakraborty Reviewed-by: Krzysztof Kozlowski Signed-off-by: Łukasz Lebiedziński Link: https://patch.msgid.link/20260406135627.234835-1-kernel@lvkasz.us Signed-off-by: Vinod Koul --- drivers/phy/samsung/phy-exynos5-usbdrd.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c index 5a181cb4597e..8711a3b62c8e 100644 --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c @@ -1958,13 +1958,14 @@ const struct exynos5_usbdrd_phy_tuning exynos7870_tunes_utmi_postinit[] = { PHYPARAM0_TXPREEMPAMPTUNE | PHYPARAM0_TXHSXVTUNE | PHYPARAM0_TXFSLSTUNE | PHYPARAM0_SQRXTUNE | PHYPARAM0_OTGTUNE | PHYPARAM0_COMPDISTUNE), - (FIELD_PREP_CONST(PHYPARAM0_TXVREFTUNE, 14) | + (FIELD_PREP_CONST(PHYPARAM0_TXVREFTUNE, 3) | FIELD_PREP_CONST(PHYPARAM0_TXRISETUNE, 1) | - FIELD_PREP_CONST(PHYPARAM0_TXRESTUNE, 3) | + FIELD_PREP_CONST(PHYPARAM0_TXRESTUNE, 2) | + FIELD_PREP_CONST(PHYPARAM0_TXPREEMPPULSETUNE, 0) | FIELD_PREP_CONST(PHYPARAM0_TXPREEMPAMPTUNE, 0) | FIELD_PREP_CONST(PHYPARAM0_TXHSXVTUNE, 0) | FIELD_PREP_CONST(PHYPARAM0_TXFSLSTUNE, 3) | - FIELD_PREP_CONST(PHYPARAM0_SQRXTUNE, 6) | + FIELD_PREP_CONST(PHYPARAM0_SQRXTUNE, 5) | FIELD_PREP_CONST(PHYPARAM0_OTGTUNE, 2) | FIELD_PREP_CONST(PHYPARAM0_COMPDISTUNE, 3))), PHY_TUNING_ENTRY_LAST -- cgit v1.2.3 From 80305760d7a55b884fb9023c490b75568d1ea0b1 Mon Sep 17 00:00:00 2001 From: Nitin Rawat Date: Wed, 15 Apr 2026 16:18:51 +0530 Subject: phy: qcom-qmp-ufs: Fix kaanapali PHY PLL lock failure after SM8650 G4 fix Commit 81af9e40e2e4 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4") moved QPHY_V6_PCS_UFS_PLL_CNTL register configuration from the shared sm8650_ufsphy_g5_pcs table to the SM8650-specific sm8650_ufsphy_pcs base table to fix Gear 4 operation on SM8650. However, this change inadvertently broke kaanapali and SM8750 SoCs which also rely on the shared sm8650_ufsphy_g5_pcs table for Gear 5 configuration but use their own sm8750_ufsphy_pcs base table. After the change, kaanapali PHYs are left without the required PLL_CNTL = 0x33 setting, causing the PHY PLL to remain at its hardware reset default value, preventing PLL lock and resulting in DME_LINKSTARTUP timeouts. Fix this by adding the missing QPHY_V6_PCS_UFS_PLL_CNTL = 0x33 entry to the sm8750_ufsphy_pcs table, mirroring what the original commit already did for sm8650_ufsphy_pcs. Cc: stable@vger.kernel.org # v6.19.12 Fixes: 81af9e40e2e4 ("phy: qcom: qmp-ufs: Fix SM8650 PCS table for Gear 4") Signed-off-by: Nitin Rawat Reviewed-by: Abel Vesa Reviewed-by: Konrad Dybcio Reviewed-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20260415104851.2763238-1-nitin.rawat@oss.qualcomm.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 771bc7c2ab50..b87314c8379d 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -1112,6 +1112,7 @@ static const struct qmp_phy_init_tbl sm8750_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PCS_CTRL1, 0x40), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x68), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_POST_EMP_LVL_S4, 0x0e), -- cgit v1.2.3 From c2cd08e8f150738515c8df415ad7ecfa3d38124a Mon Sep 17 00:00:00 2001 From: Yulin Lu Date: Mon, 13 Apr 2026 15:00:33 +0800 Subject: phy: eswin: Fix incorrect error check in probe() devm_ioremap() returns NULL on failure, not an ERR_PTR. Using IS_ERR() to check the return value is incorrect. Fix this by checking for NULL and returning -ENOMEM. Fixes: 67ee9ccaa34a ("phy: eswin: Create eswin directory and add EIC7700 SATA PHY driver") Reported-by: Dan Carpenter Closes: https://lore.kernel.org/linux-phy/adjNbuWoc1B-3Ok1@stanley.mountain/ Signed-off-by: Yulin Lu Link: https://patch.msgid.link/20260413070033.128-1-luyulin@eswincomputing.com Signed-off-by: Vinod Koul --- drivers/phy/eswin/phy-eic7700-sata.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/eswin/phy-eic7700-sata.c b/drivers/phy/eswin/phy-eic7700-sata.c index c33653d48daa..76774b9e391b 100644 --- a/drivers/phy/eswin/phy-eic7700-sata.c +++ b/drivers/phy/eswin/phy-eic7700-sata.c @@ -216,8 +216,8 @@ static int eic7700_sata_phy_probe(struct platform_device *pdev) return -ENOENT; regs = devm_ioremap(dev, res->start, resource_size(res)); - if (IS_ERR(regs)) - return PTR_ERR(regs); + if (!regs) + return -ENOMEM; sata_phy->regmap = devm_regmap_init_mmio (dev, regs, &eic7700_sata_phy_regmap_config); -- cgit v1.2.3 From a4058c09dd6e28ec33316fd6eb45ddae4cab1f31 Mon Sep 17 00:00:00 2001 From: Felix Gu Date: Thu, 26 Mar 2026 00:23:58 +0800 Subject: phy: spacemit: Remove incorrect clk_disable() in spacemit_usb2phy_init() When clk_enable() fails, the clock was never enabled. Calling clk_disable() in this error path is incorrect. Remove the spurious clk_disable() call from the error handling in spacemit_usb2phy_init(). Fixes: fe4bc1a08638 ("phy: spacemit: support K1 USB2.0 PHY controller") Signed-off-by: Felix Gu Reviewed-by: Ze Huang Link: https://patch.msgid.link/20260326-k1-usb3-v1-1-0c2b6adf5185@gmail.com Signed-off-by: Vinod Koul --- drivers/phy/spacemit/phy-k1-usb2.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/phy/spacemit/phy-k1-usb2.c b/drivers/phy/spacemit/phy-k1-usb2.c index 9215d0b223b2..e8c1e26428a9 100644 --- a/drivers/phy/spacemit/phy-k1-usb2.c +++ b/drivers/phy/spacemit/phy-k1-usb2.c @@ -97,7 +97,6 @@ static int spacemit_usb2phy_init(struct phy *phy) ret = clk_enable(sphy->clk); if (ret) { dev_err(&phy->dev, "failed to enable clock\n"); - clk_disable(sphy->clk); return ret; } -- cgit v1.2.3 From cbdbfba9e8907bea923874d05d6a35ff429a5544 Mon Sep 17 00:00:00 2001 From: Ihor Matushchak Date: Fri, 8 May 2026 10:49:33 +0200 Subject: regulator: Kconfig: fix a typo in help Fixes a typo in Kconfig, 'protectorvia' -> 'protector via'. Signed-off-by: Ihor Matushchak Link: https://patch.msgid.link/20260508084933.4076-1-ihor.matushchak@foobox.net Signed-off-by: Mark Brown --- drivers/regulator/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index d71dac9436e3..78076ac6eac4 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -757,7 +757,7 @@ config REGULATOR_MAX20086 select REGMAP_I2C help This driver controls a Maxim MAX20086-MAX20089 camera power - protectorvia I2C bus. The regulator has 2 or 4 outputs depending on + protector via I2C bus. The regulator has 2 or 4 outputs depending on the device model. This driver is only capable to turn on/off them. config REGULATOR_MAX20411 -- cgit v1.2.3 From a3bf0f28d4ba16e1f35f8c983bb04426b87e2a78 Mon Sep 17 00:00:00 2001 From: Junyoung Jang Date: Mon, 4 May 2026 20:26:49 +0900 Subject: fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap statmount_mnt_idmap() writes one mapping with seq_printf() and then manually advances seq->count to include the NUL separator. If seq_printf() overflows, seq_set_overflow() sets seq->count to seq->size. The manual seq->count++ changes this to seq->size + 1. seq_has_overflowed() then no longer detects the overflow. The corrupted count returns to statmount_string(), which later executes: seq->buf[seq->count++] = '\0'; This causes a 1-byte NULL out-of-bounds write on the dynamically allocated seq buffer. Fix this by checking for overflow immediately after seq_printf(). Fixes: 37c4a9590e1e ("statmount: allow to retrieve idmappings") Signed-off-by: Junyoung Jang Link: https://patch.msgid.link/20260504112649.1862936-1-graypanda.inzag@gmail.com Signed-off-by: Christian Brauner --- fs/mnt_idmapping.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/mnt_idmapping.c b/fs/mnt_idmapping.c index 6472c4ea3d1e..cb61fbdb52e9 100644 --- a/fs/mnt_idmapping.c +++ b/fs/mnt_idmapping.c @@ -375,6 +375,8 @@ int statmount_mnt_idmap(struct mnt_idmap *idmap, struct seq_file *seq, bool uid_ continue; seq_printf(seq, "%u %u %u", extent->first, lower, extent->count); + if (seq_has_overflowed(seq)) + return -EAGAIN; seq->count++; /* mappings are separated by \0 */ if (seq_has_overflowed(seq)) -- cgit v1.2.3 From a7cf1da7ac016490d6a1106f2aa6b602d34e9a12 Mon Sep 17 00:00:00 2001 From: Hongling Zeng Date: Fri, 1 May 2026 15:10:58 +0800 Subject: fs: Fix return in jfs_mkdir and orangefs_mkdir Return NULL instead of passing to ERR_PTR while err is zero Fixes these smatch warnings: - fs/jfs/namei.c:311 jfs_mkdir() warn: passing zero to 'ERR_PTR' - fs/orangefs/namei.c:369 orangefs_mkdir() warn: passing zero to 'ERR_PTR' Fixes: 88d5baf69082 ("Change inode_operations.mkdir to return struct dentry *") Signed-off-by: Hongling Zeng Link: https://patch.msgid.link/20260501071058.1243245-1-zenghongling@kylinos.cn Reviewed-by: Jori Koolstra Signed-off-by: Christian Brauner --- fs/jfs/namei.c | 2 +- fs/orangefs/namei.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c index 60c4a0e0fca5..442d62679262 100644 --- a/fs/jfs/namei.c +++ b/fs/jfs/namei.c @@ -309,7 +309,7 @@ static struct dentry *jfs_mkdir(struct mnt_idmap *idmap, struct inode *dip, out1: jfs_info("jfs_mkdir: rc:%d", rc); - return ERR_PTR(rc); + return rc ? ERR_PTR(rc) : NULL; } /* diff --git a/fs/orangefs/namei.c b/fs/orangefs/namei.c index bec5475de094..75e65e72c2d6 100644 --- a/fs/orangefs/namei.c +++ b/fs/orangefs/namei.c @@ -362,7 +362,7 @@ static struct dentry *orangefs_mkdir(struct mnt_idmap *idmap, struct inode *dir, __orangefs_setattr(dir, &iattr); out: op_release(new_op); - return ERR_PTR(ret); + return ret ? ERR_PTR(ret) : NULL; } static int orangefs_rename(struct mnt_idmap *idmap, -- cgit v1.2.3 From c3880a7b10e487e033dc6f388bda118436566f7a Mon Sep 17 00:00:00 2001 From: Junxi Qian Date: Wed, 6 May 2026 20:24:15 +0800 Subject: fuse: fix writeback array overflow when max_pages is one fuse_iomap_writeback_range() appends one folio pointer and one fuse_folio_desc for every dirty range that is merged into the current writeback request. The merge decision checks the byte budget against fc->max_pages and fc->max_write, but it does not check whether the folio and descriptor arrays still have another free slot. This is not sufficient for fuseblk, where the filesystem block size can be smaller than PAGE_SIZE. With writeback cache enabled and max_pages negotiated as one, contiguous sub-page dirty ranges can fit within the byte budget while spanning more than one folio. The next append can then write past the one-slot folios and descs arrays. Split the request when the number of already attached folios has reached fc->max_pages. This keeps the folio/descriptor slot accounting in sync with the send decision. Fixes: ef7e7cbb323f ("fuse: use iomap for writeback") Cc: stable@vger.kernel.org Reviewed-by: Joanne Koong Signed-off-by: Junxi Qian Link: https://patch.msgid.link/20260506122415.205340-1-qjx1298677004@gmail.com Acked-by: Miklos Szeredi Signed-off-by: Christian Brauner --- fs/fuse/file.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index c59452d60b8d..f94f3dc082c6 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -2176,7 +2176,10 @@ static bool fuse_folios_need_send(struct fuse_conn *fc, loff_t pos, WARN_ON(!ap->num_folios); - /* Reached max pages */ + /* Reached max pages or max folio slots */ + if (ap->num_folios >= fc->max_pages) + return true; + if (DIV_ROUND_UP(bytes, PAGE_SIZE) > fc->max_pages) return true; -- cgit v1.2.3 From 834e98acb748025c04fed3cac9c8954454f4b520 Mon Sep 17 00:00:00 2001 From: Pankaj Raghav Date: Mon, 11 May 2026 13:19:18 +0200 Subject: fs: fix forced iversion increment on lazytime timestamp updates When updating timestamps with lazytime enabled, if only I_DIRTY_TIME is set (pure lazytime update), inode_maybe_inc_iversion() should not be forced to increment i_version. The force parameter should only be true when actual data or metadata changes require an iversion bump. The current code uses "!!dirty" which evaluates to true whenever dirty has any bits set, including the I_DIRTY_TIME bit alone. This forces an iversion increment on every lazytime timestamp update, which then sets I_DIRTY_SYNC, triggering expensive log flushes on subsequent fdatasync calls. Andres reported this issue when he noticed a perf regression[1]. Fix this by using "dirty != I_DIRTY_TIME" as the force parameter. This passes false for pure lazytime updates (allowing the I_VERSION_QUERIED optimization to work), while still forcing the increment when dirty contains other flags indicating real changes that require iversion updates. [1] https://lore.kernel.org/linux-xfs/7ys6erh3nnyeerv2nybyfvp7dmaknuxrlxv74wx56ocdothkc6@ekfiadtkfn2r/ Fixes: 85c871a02b03 ("fs: add support for non-blocking timestamp updates") Signed-off-by: Pankaj Raghav Link: https://patch.msgid.link/20260511111918.1793689-1-p.raghav@samsung.com Reviewed-by: Jeff Layton Reviewed-by: Christoph Hellwig Reviewed-by: Carlos Maiolino Signed-off-by: Christian Brauner --- fs/inode.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/fs/inode.c b/fs/inode.c index 6a3cbc7dcd28..62c579a0cf7d 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -2124,7 +2124,13 @@ static int inode_update_cmtime(struct inode *inode, unsigned int flags) inode_iversion_need_inc(inode)) return -EAGAIN; } else { - if (inode_maybe_inc_iversion(inode, !!dirty)) + /* + * Don't force iversion increment for pure lazytime + * updates (I_DIRTY_TIME only), let I_VERSION_QUERIED + * dictate whether the increment is needed. + */ + if (inode_maybe_inc_iversion(inode, + dirty != I_DIRTY_TIME)) dirty |= I_DIRTY_SYNC; } } -- cgit v1.2.3 From 725ecd80688bf3c57ca9205431f2c06174ff0756 Mon Sep 17 00:00:00 2001 From: Zhihao Cheng Date: Thu, 7 May 2026 19:23:01 +0800 Subject: nsfs: fix wrong error code returned for pidns ioctls When executing NS_GET_PID_FROM_PIDNS (or similar pidns ioctls), if the target task cannot be found in the corresponding pid_ns, the error code should be ESRCH instead of ENOTTY. This bug was introduced when the extensible ioctl handling was added. Without proper return, ret would be overwritten by the default case in the extensible ioctl switch statement. Fixes: a1d220d9dafa8 ("nsfs: iterate through mount namespaces") Signed-off-by: Zhihao Cheng Link: https://patch.msgid.link/20260507112301.1042757-1-chengzhihao1@huawei.com Reviewed-by: Yang Erkun Signed-off-by: Christian Brauner --- fs/nsfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nsfs.c b/fs/nsfs.c index 51e8c9430477..160018c4fb36 100644 --- a/fs/nsfs.c +++ b/fs/nsfs.c @@ -266,7 +266,7 @@ static long ns_ioctl(struct file *filp, unsigned int ioctl, else tsk = find_task_by_pid_ns(arg, pid_ns); if (!tsk) - break; + return ret; switch (ioctl) { case NS_GET_PID_FROM_PIDNS: -- cgit v1.2.3 From 99269799bf2448aebccee164df56c22a7b85b02c Mon Sep 17 00:00:00 2001 From: Thomas Richter Date: Tue, 5 May 2026 12:34:33 +0200 Subject: s390/pai: Fix missing PAI counter increments under heavy load MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Machines with a larger number of CPUs and under heavy load sometimes loose PAI counter increments during recording using events -e CRYPTO_ÂLL or -e NNPA_ALL. Counting is not affected. This happens when several PAI crypto counters are incremented during the same cryptographic operation. During schedule out the functions paiXXX_sched_task() (with XXX either crypt or ext) +--> pai_have_samples() +--> pai_have_sample() +--> pai_copy() +--> pai_push_sample() are called to read out PAI counter values. In pai_copy() the current values of PAI counters are read from the PMU memory mapped page and compared to the values read during last schedule out operation, which have been saved in a backup page named PAI_SAVE_AREA(event). For each PAI counter a delta is calculated and when the delta is positive, that PAI counter was incremented by hardware. This positve delta is reported as raw data record attached to a sample. After all deltas have been calculated, the new PAI counter values are saved in the backup page PAI_SAVE_AREA(event). However this is done in pai_push_sample(), leaving a small window for missing hardware triggered updates. Here is one scenario: PAI counter idx: 0 1 2 3 4 5 6 7 .... N +---+---+---+---+---+---+---+---+ +---+ PAI counter page:| | | X | | | | | |....| Y | +---+---+---+---+---+---+---+---+ +---+ In pai_copy() each PAI counter value is read and compared to its old value. This is done in a loop. When PAI counter indexed N is read, the hardware might increment PAI counter indexed 2 again, updating its value from X to X+1. Later pai_push_sample() simply mem-copies the complete PAI counter page to a backup page and the increment of X+1 is lost, because the backup page now contains the new value. Read each PAI counter and save this value in the backup page when there is a positive delta. This omits any time window between read and store. This also reduced the work load as only modified PAI counters are saved. Cc: stable@vger.kernel.org Fixes: fe861b0c8d06 ("s390/pai: save PAI counter value page in event structure") Signed-off-by: Thomas Richter Reviewed-by: Sumanth Korikkar Signed-off-by: Alexander Gordeev --- arch/s390/kernel/perf_pai.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/arch/s390/kernel/perf_pai.c b/arch/s390/kernel/perf_pai.c index f13c5c5fbea6..cdb8006220ca 100644 --- a/arch/s390/kernel/perf_pai.c +++ b/arch/s390/kernel/perf_pai.c @@ -186,6 +186,13 @@ static u64 pai_getctr(unsigned long *page, int nr, unsigned long offset) return page[nr]; } +static void pai_setctr(unsigned long *page, int nr, unsigned long offset, u64 v) +{ + if (offset) + nr += offset / sizeof(*page); + page[nr] = v; +} + /* Read the counter values. Return value from location in CMP. For base * event xxx_ALL sum up all events. Returns counter value. */ @@ -551,6 +558,8 @@ static void paicrypt_del(struct perf_event *event, int flags) /* Create raw data and save it in buffer. Calculate the delta for each * counter between this invocation and the last invocation. * Returns number of bytes copied. + * After reading from PAI counter page, save the read value to the old + * page to calculate PAI counter deltas. * Saves only entries with positive counter difference of the form * 2 bytes: Number of counter * 8 bytes: Value of counter @@ -562,16 +571,22 @@ static size_t pai_copy(struct pai_userdata *userdata, unsigned long *page, int i, outidx = 0; for (i = 1; i <= pp->num_avail; i++) { - u64 val = 0, val_old = 0; + u64 val = 0, val_old = 0, val_k = 0, val_old_k = 0; if (!exclude_kernel) { - val += pai_getctr(page, i, pp->kernel_offset); - val_old += pai_getctr(page_old, i, pp->kernel_offset); + val_k = pai_getctr(page, i, pp->kernel_offset); + val_old_k = pai_getctr(page_old, i, pp->kernel_offset); + if (val_k != val_old_k) + pai_setctr(page_old, i, pp->kernel_offset, val_k); } if (!exclude_user) { - val += pai_getctr(page, i, 0); - val_old += pai_getctr(page_old, i, 0); + val = pai_getctr(page, i, 0); + val_old = pai_getctr(page_old, i, 0); + if (val != val_old) + pai_setctr(page_old, i, 0, val); } + val += val_k; + val_old += val_old_k; if (val >= val_old) val -= val_old; else @@ -602,8 +617,6 @@ static size_t pai_copy(struct pai_userdata *userdata, unsigned long *page, static int pai_push_sample(size_t rawsize, struct pai_map *cpump, struct perf_event *event) { - int idx = PAI_PMU_IDX(event); - struct pai_pmu *pp = &pai_pmu[idx]; struct perf_sample_data data; struct perf_raw_record raw; struct pt_regs regs; @@ -634,8 +647,6 @@ static int pai_push_sample(size_t rawsize, struct pai_map *cpump, overflow = perf_event_overflow(event, &data, ®s); perf_event_update_userpage(event); - /* Save crypto counter lowcore page after reading event data. */ - memcpy((void *)PAI_SAVE_AREA(event), cpump->area, pp->area_size); return overflow; } -- cgit v1.2.3 From ea34567db0a6b3a7ce78ba421592344315c8f90e Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Thu, 7 May 2026 16:27:08 +0200 Subject: s390/cio: Restore GFP_DMA for CHSC allocation Re-add GFP_DMA when allocating memory for CHSC control blocks. On some supported machines, CHSC cannot access memory outside the DMA zone, causing CHSC command failures. Cc: stable@vger.kernel.org Fixes: a3a64a4def8d ("s390/cio: remove unneeded DMA zone allocation") Signed-off-by: Peter Oberparleiter Reviewed-by: Heiko Carstens Signed-off-by: Alexander Gordeev --- drivers/s390/cio/chsc.c | 4 ++-- drivers/s390/cio/chsc_sch.c | 20 ++++++++++---------- drivers/s390/cio/scm.c | 2 +- 3 files changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c index fbb58edd6274..9689f722c863 100644 --- a/drivers/s390/cio/chsc.c +++ b/drivers/s390/cio/chsc.c @@ -1142,8 +1142,8 @@ int __init chsc_init(void) { int ret; - sei_page = (void *)get_zeroed_page(GFP_KERNEL); - chsc_page = (void *)get_zeroed_page(GFP_KERNEL); + sei_page = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); + chsc_page = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!sei_page || !chsc_page) { ret = -ENOMEM; goto out_err; diff --git a/drivers/s390/cio/chsc_sch.c b/drivers/s390/cio/chsc_sch.c index 73413417a2ce..b6cb8bb8bcc4 100644 --- a/drivers/s390/cio/chsc_sch.c +++ b/drivers/s390/cio/chsc_sch.c @@ -292,7 +292,7 @@ static int chsc_ioctl_start(void __user *user_area) if (!css_general_characteristics.dynio) /* It makes no sense to try. */ return -EOPNOTSUPP; - chsc_area = (void *)get_zeroed_page(GFP_KERNEL); + chsc_area = (void *)get_zeroed_page(GFP_DMA | GFP_KERNEL); if (!chsc_area) return -ENOMEM; request = kzalloc_obj(*request); @@ -340,7 +340,7 @@ static int chsc_ioctl_on_close_set(void __user *user_area) ret = -ENOMEM; goto out_unlock; } - on_close_chsc_area = (void *)get_zeroed_page(GFP_KERNEL); + on_close_chsc_area = (void *)get_zeroed_page(GFP_DMA | GFP_KERNEL); if (!on_close_chsc_area) { ret = -ENOMEM; goto out_free_request; @@ -392,7 +392,7 @@ static int chsc_ioctl_start_sync(void __user *user_area) struct chsc_sync_area *chsc_area; int ret, ccode; - chsc_area = (void *)get_zeroed_page(GFP_KERNEL); + chsc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!chsc_area) return -ENOMEM; if (copy_from_user(chsc_area, user_area, PAGE_SIZE)) { @@ -438,7 +438,7 @@ static int chsc_ioctl_info_channel_path(void __user *user_cd) u8 data[PAGE_SIZE - 20]; } __attribute__ ((packed)) *scpcd_area; - scpcd_area = (void *)get_zeroed_page(GFP_KERNEL); + scpcd_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!scpcd_area) return -ENOMEM; cd = kzalloc_obj(*cd); @@ -500,7 +500,7 @@ static int chsc_ioctl_info_cu(void __user *user_cd) u8 data[PAGE_SIZE - 20]; } __attribute__ ((packed)) *scucd_area; - scucd_area = (void *)get_zeroed_page(GFP_KERNEL); + scucd_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!scucd_area) return -ENOMEM; cd = kzalloc_obj(*cd); @@ -563,7 +563,7 @@ static int chsc_ioctl_info_sch_cu(void __user *user_cud) u8 data[PAGE_SIZE - 20]; } __attribute__ ((packed)) *sscud_area; - sscud_area = (void *)get_zeroed_page(GFP_KERNEL); + sscud_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!sscud_area) return -ENOMEM; cud = kzalloc_obj(*cud); @@ -625,7 +625,7 @@ static int chsc_ioctl_conf_info(void __user *user_ci) u8 data[PAGE_SIZE - 20]; } __attribute__ ((packed)) *sci_area; - sci_area = (void *)get_zeroed_page(GFP_KERNEL); + sci_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!sci_area) return -ENOMEM; ci = kzalloc_obj(*ci); @@ -696,7 +696,7 @@ static int chsc_ioctl_conf_comp_list(void __user *user_ccl) u32 res; } __attribute__ ((packed)) *cssids_parm; - sccl_area = (void *)get_zeroed_page(GFP_KERNEL); + sccl_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!sccl_area) return -ENOMEM; ccl = kzalloc_obj(*ccl); @@ -756,7 +756,7 @@ static int chsc_ioctl_chpd(void __user *user_chpd) int ret; chpd = kzalloc_obj(*chpd); - scpd_area = (void *)get_zeroed_page(GFP_KERNEL); + scpd_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!scpd_area || !chpd) { ret = -ENOMEM; goto out_free; @@ -796,7 +796,7 @@ static int chsc_ioctl_dcal(void __user *user_dcal) u8 data[PAGE_SIZE - 36]; } __attribute__ ((packed)) *sdcal_area; - sdcal_area = (void *)get_zeroed_page(GFP_KERNEL); + sdcal_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA); if (!sdcal_area) return -ENOMEM; dcal = kzalloc_obj(*dcal); diff --git a/drivers/s390/cio/scm.c b/drivers/s390/cio/scm.c index d13ed1011c03..171212a6d2d9 100644 --- a/drivers/s390/cio/scm.c +++ b/drivers/s390/cio/scm.c @@ -229,7 +229,7 @@ int scm_update_information(void) size_t num; int ret; - scm_info = (void *)__get_free_page(GFP_KERNEL); + scm_info = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); if (!scm_info) return -ENOMEM; -- cgit v1.2.3 From 2beaa98b46c4cc90ed8a674f27a586d7f547bbe5 Mon Sep 17 00:00:00 2001 From: DaeMyung Kang Date: Mon, 11 May 2026 02:11:14 +0900 Subject: ntfs: restore $MFT mirror contents check check_mft_mirror() still computes the number of bytes to validate in each mirrored MFT record, but the actual comparison against $MFTMirr was dropped when the superblock code was updated. As a result, mount misses a stale or inconsistent $MFTMirr as long as both records pass the structural baad-record checks. Restore the comparison and log an error when the primary $MFT record differs from its mirror copy. Returning false lets the existing mount error handling mark the volume as having NTFS errors and, with on_errors=remount-ro, continue read-only. The default on_errors=continue mount policy still allows the mount to proceed. Fixes: 6251f0b0de7d ("ntfs: update super block operations") Signed-off-by: DaeMyung Kang Signed-off-by: Namjae Jeon --- fs/ntfs/super.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c index d282cf6e712e..9e321cc2febe 100644 --- a/fs/ntfs/super.c +++ b/fs/ntfs/super.c @@ -993,6 +993,13 @@ mft_unmap_out: ntfs_is_baad_recordp((__le32 *)kmirr)) bytes = vol->mft_record_size; } + /* Compare the two records. */ + if (memcmp(kmft, kmirr, bytes)) { + ntfs_error(sb, + "$MFT and $MFTMirr record %i do not match. Run chkdsk.", + i); + goto mm_unmap_out; + } kmft += vol->mft_record_size; kmirr += vol->mft_record_size; } while (++i < vol->mftmirr_size); -- cgit v1.2.3 From 4314a44564eb1565349fed7a4192344c5f46fc85 Mon Sep 17 00:00:00 2001 From: Yazhou Tang Date: Wed, 6 May 2026 17:47:12 +0800 Subject: bpf: Fix out-of-bounds read in bpf_patch_call_args() The interpreters_args array only accommodates stack depths up to MAX_BPF_STACK (512 bytes). However, do_misc_fixups() may allow a larger stack depth if JIT is requested. If JIT compilation later fails and falls back to the interpreter, the verifier invokes bpf_patch_call_args() with this oversized stack depth. This causes a load-time out-of-bounds (OOB) read when calculating the interpreter function pointer index. Fix this by changing bpf_patch_call_args() to return an int and explicitly rejecting the JIT fallback (returning -EINVAL) if the stack depth exceeds MAX_BPF_STACK. Fixes: 1ea47e01ad6e ("bpf: add support for bpf_call to interpreter") Co-developed-by: Tianci Cao Signed-off-by: Tianci Cao Co-developed-by: Shenghao Yuan Signed-off-by: Shenghao Yuan Signed-off-by: Yazhou Tang Acked-by: Xu Kuohai Link: https://lore.kernel.org/r/20260506094714.419842-2-tangyazhou@zju.edu.cn Signed-off-by: Alexei Starovoitov --- include/linux/bpf.h | 2 +- kernel/bpf/core.c | 6 +++++- kernel/bpf/fixups.c | 7 ++++++- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 01e203964892..52b30e9ea431 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -2917,7 +2917,7 @@ int bpf_check_uarg_tail_zero(bpfptr_t uaddr, size_t expected_size, int bpf_check(struct bpf_prog **fp, union bpf_attr *attr, bpfptr_t uattr, u32 uattr_size); #ifndef CONFIG_BPF_JIT_ALWAYS_ON -void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth); +int bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth); #endif struct btf *bpf_get_btf_vmlinux(void); diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 8b018ff48875..63044ebe5721 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -2394,13 +2394,17 @@ EVAL4(PROG_NAME_LIST, 416, 448, 480, 512) #undef PROG_NAME_LIST #ifdef CONFIG_BPF_SYSCALL -void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth) +int bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth) { stack_depth = max_t(u32, stack_depth, 1); + /* Prevent out-of-bounds read to interpreters_args */ + if (stack_depth > MAX_BPF_STACK) + return -EINVAL; insn->off = (s16) insn->imm; insn->imm = interpreters_args[(round_up(stack_depth, 32) / 32) - 1] - __bpf_call_base_args; insn->code = BPF_JMP | BPF_CALL_ARGS; + return 0; } #endif #endif diff --git a/kernel/bpf/fixups.c b/kernel/bpf/fixups.c index fba9e8c00878..df8f48091321 100644 --- a/kernel/bpf/fixups.c +++ b/kernel/bpf/fixups.c @@ -1416,7 +1416,12 @@ int bpf_fixup_call_args(struct bpf_verifier_env *env) depth = get_callee_stack_depth(env, insn, i); if (depth < 0) return depth; - bpf_patch_call_args(insn, depth); + err = bpf_patch_call_args(insn, depth); + if (err) { + verbose(env, "stack depth %d exceeds interpreter stack depth limit\n", + depth); + return err; + } } err = 0; #endif -- cgit v1.2.3 From 58a8f3e2501dc14b8e00e883d6aaf0600a239da7 Mon Sep 17 00:00:00 2001 From: Yazhou Tang Date: Wed, 6 May 2026 17:47:13 +0800 Subject: bpf: Fix s16 truncation for large bpf-to-bpf call offsets Currently, the BPF instruction set allows bpf-to-bpf calls (or internal calls, pseudo calls) to use a 32-bit imm field to represent the relative jump offset. However, when JIT is disabled or falls back to the interpreter, the verifier invokes bpf_patch_call_args() to rewrite the call instruction. In this function, the 32-bit imm is downcast to s16 and stored in the off field. void bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth) { stack_depth = max_t(u32, stack_depth, 1); insn->off = (s16) insn->imm; insn->imm = interpreters_args[(round_up(stack_depth, 32) / 32) - 1] - __bpf_call_base_args; insn->code = BPF_JMP | BPF_CALL_ARGS; } If the original imm exceeds the s16 range (i.e., a jump offset greater than 32767 instructions), this downcast silently truncates the offset, resulting in an incorrect call target. Fix this by: 1. In bpf_patch_call_args(), keeping the imm field unchanged and using the off field to store the index of the interpreter function. 2. In ___bpf_prog_run() for the JMP_CALL_ARGS case, retrieving the interpreter function pointer from the interpreters_args array using the off field as the index, and passing the original imm to calculate the last argument of the interpreter function. After these changes, the truncation issue is resolved, and __bpf_call_base_args is also no longer needed and can be removed, which makes the code cleaner. Performance: In ___bpf_prog_run() for the JMP_CALL_ARGS case, changing the retrieval of the interpreter function pointer from pointer addition to direct array indexing improves performance. The possible reason is that the latter has better instruction-level parallelism. See the v5 discussion [1] for more details. [1] https://lore.kernel.org/bpf/f120c3c4-6999-414a-b514-518bb64b4758@zju.edu.cn/ To avoid requiring bpftool changes, keep the new imm/off encoding internal and restore the legacy xlated dump layout in bpf_insn_prepare_dump(). For bpf-to-bpf call offsets that do not fit in s16, export off as 0 instead of a truncated and misleading value. Fixes: 1ea47e01ad6e ("bpf: add support for bpf_call to interpreter") Fixes: 7105e828c087 ("bpf: allow for correlation of maps and helpers in dump") Suggested-by: Xu Kuohai Suggested-by: Puranjay Mohan Co-developed-by: Tianci Cao Signed-off-by: Tianci Cao Co-developed-by: Shenghao Yuan Signed-off-by: Shenghao Yuan Signed-off-by: Yazhou Tang Link: https://lore.kernel.org/r/20260506094714.419842-3-tangyazhou@zju.edu.cn Signed-off-by: Alexei Starovoitov --- include/linux/bpf.h | 6 ++++++ include/linux/filter.h | 3 --- kernel/bpf/core.c | 21 ++++++++++++++------- kernel/bpf/fixups.c | 6 +++--- kernel/bpf/syscall.c | 26 ++++++++++++++++++++++++++ 5 files changed, 49 insertions(+), 13 deletions(-) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 52b30e9ea431..cd191c5fdb0a 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -2918,6 +2918,12 @@ int bpf_check(struct bpf_prog **fp, union bpf_attr *attr, bpfptr_t uattr, u32 ua #ifndef CONFIG_BPF_JIT_ALWAYS_ON int bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth); +s32 bpf_call_args_imm(s16 idx); +#else +static inline s32 bpf_call_args_imm(s16 idx) +{ + return 0; +} #endif struct btf *bpf_get_btf_vmlinux(void); diff --git a/include/linux/filter.h b/include/linux/filter.h index 1ec6d5ba64cc..88a241aac36a 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -1151,9 +1151,6 @@ bool sk_filter_charge(struct sock *sk, struct sk_filter *fp); void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp); u64 __bpf_call_base(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5); -#define __bpf_call_base_args \ - ((u64 (*)(u64, u64, u64, u64, u64, const struct bpf_insn *)) \ - (void *)__bpf_call_base) struct bpf_prog *bpf_int_jit_compile(struct bpf_verifier_env *env, struct bpf_prog *prog); void bpf_jit_compile(struct bpf_prog *prog); diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index 63044ebe5721..6aa2a8b24030 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -1771,6 +1771,9 @@ static u32 abs_s32(s32 x) return x >= 0 ? (u32)x : -(u32)x; } +static u64 (*interpreters_args[])(u64 r1, u64 r2, u64 r3, u64 r4, u64 r5, + const struct bpf_insn *insn); + /** * ___bpf_prog_run - run eBPF program on a given context * @regs: is the array of MAX_BPF_EXT_REG eBPF pseudo-registers @@ -2077,10 +2080,9 @@ select_insn: CONT; JMP_CALL_ARGS: - BPF_R0 = (__bpf_call_base_args + insn->imm)(BPF_R1, BPF_R2, - BPF_R3, BPF_R4, - BPF_R5, - insn + insn->off + 1); + BPF_R0 = interpreters_args[insn->off](BPF_R1, BPF_R2, BPF_R3, + BPF_R4, BPF_R5, + insn + insn->imm + 1); CONT; JMP_TAIL_CALL: { @@ -2400,12 +2402,17 @@ int bpf_patch_call_args(struct bpf_insn *insn, u32 stack_depth) /* Prevent out-of-bounds read to interpreters_args */ if (stack_depth > MAX_BPF_STACK) return -EINVAL; - insn->off = (s16) insn->imm; - insn->imm = interpreters_args[(round_up(stack_depth, 32) / 32) - 1] - - __bpf_call_base_args; + insn->off = (round_up(stack_depth, 32) / 32) - 1; insn->code = BPF_JMP | BPF_CALL_ARGS; return 0; } + +s32 bpf_call_args_imm(s16 idx) +{ + if (WARN_ON_ONCE(idx < 0 || idx >= ARRAY_SIZE(interpreters_args))) + return 0; + return BPF_CALL_IMM(interpreters_args[idx]); +} #endif #endif diff --git a/kernel/bpf/fixups.c b/kernel/bpf/fixups.c index df8f48091321..3692adf62558 100644 --- a/kernel/bpf/fixups.c +++ b/kernel/bpf/fixups.c @@ -1250,9 +1250,9 @@ static int jit_subprogs(struct bpf_verifier_env *env) } if (!bpf_pseudo_call(insn)) continue; - insn->off = env->insn_aux_data[i].call_imm; - subprog = bpf_find_subprog(env, i + insn->off + 1); - insn->imm = subprog; + insn->imm = env->insn_aux_data[i].call_imm; + subprog = bpf_find_subprog(env, i + insn->imm + 1); + insn->off = subprog; } prog->jited = 1; diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index a3c0214ca934..630d530782fe 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -4919,6 +4919,29 @@ out: return map; } +static void prepare_dump_pseudo_call(struct bpf_insn *insn) +{ + s32 call_off = insn->imm; + + /* + * BPF_CALL_ARGS only exists for interpreter fallback. + * 1. For interpreter (BPF_CALL_ARGS): insn->off is the index of + * interpreters_args array, so here using bpf_call_args_imm() + * to get the real address offset. + * 2. For JIT (BPF_CALL): insn->off is the subprog id. + */ + if (insn->code == (BPF_JMP | BPF_CALL_ARGS)) + insn->imm = bpf_call_args_imm(insn->off); + else + insn->imm = insn->off; + + /* Avoid dumping a truncated and misleading pc-relative offset. */ + if (call_off > S16_MAX || call_off < S16_MIN) + insn->off = 0; + else + insn->off = call_off; +} + static struct bpf_insn *bpf_insn_prepare_dump(const struct bpf_prog *prog, const struct cred *f_cred) { @@ -4944,6 +4967,9 @@ static struct bpf_insn *bpf_insn_prepare_dump(const struct bpf_prog *prog, } if (code == (BPF_JMP | BPF_CALL) || code == (BPF_JMP | BPF_CALL_ARGS)) { + /* Restore the legacy xlated dump layout. */ + if (insns[i].src_reg == BPF_PSEUDO_CALL) + prepare_dump_pseudo_call(&insns[i]); if (code == (BPF_JMP | BPF_CALL_ARGS)) insns[i].code = BPF_JMP | BPF_CALL; if (!bpf_dump_raw_ok(f_cred)) -- cgit v1.2.3 From 344a00712ce1bce8db72b0eadc1595dede31565a Mon Sep 17 00:00:00 2001 From: Yazhou Tang Date: Wed, 6 May 2026 17:47:14 +0800 Subject: selftests/bpf: Add test for large offset bpf-to-bpf call Add a selftest to verify the verifier and JIT behavior when handling bpf-to-bpf calls with relative jump offsets exceeding the s16 boundary. The test utilizes an inline assembly block with ".rept 32765" to generate a massive dummy subprogram. By placing this padding between the main program and the target subprogram, it forces the verifier to process a bpf-to-bpf call where the imm field exceeds the s16 range. - When JIT is enabled, it asserts that the program is successfully loaded and executes correctly to return the expected value. Since the fix does not change the JIT behavior, the test passes whether the fix is applied or not. - When JIT is disabled, it also asserts that the program is successfully loaded and executes correctly to return the expected value 3. - Before the fix, the verifier rewrites the call instruction with a truncated offset (here 32768 -> -32768) and lets it pass. When the program is executed, the call instruction will go to a wrong target (the landing pad) instead of the intended subprogram, then return -1 and fail. - After the fix, the verifier correctly handles the large offset and allows it to pass. The program then executes correctly to return the expected value 3. Co-developed-by: Tianci Cao Signed-off-by: Tianci Cao Co-developed-by: Shenghao Yuan Signed-off-by: Shenghao Yuan Signed-off-by: Yazhou Tang Acked-by: Xu Kuohai Link: https://lore.kernel.org/r/20260506094714.419842-4-tangyazhou@zju.edu.cn Signed-off-by: Alexei Starovoitov --- tools/testing/selftests/bpf/prog_tests/verifier.c | 2 + .../selftests/bpf/progs/verifier_call_large_imm.c | 66 ++++++++++++++++++++++ 2 files changed, 68 insertions(+) create mode 100644 tools/testing/selftests/bpf/progs/verifier_call_large_imm.c diff --git a/tools/testing/selftests/bpf/prog_tests/verifier.c b/tools/testing/selftests/bpf/prog_tests/verifier.c index a96b25ebff23..06cd24e37b3f 100644 --- a/tools/testing/selftests/bpf/prog_tests/verifier.c +++ b/tools/testing/selftests/bpf/prog_tests/verifier.c @@ -22,6 +22,7 @@ #include "verifier_bswap.skel.h" #include "verifier_btf_ctx_access.skel.h" #include "verifier_btf_unreliable_prog.skel.h" +#include "verifier_call_large_imm.skel.h" #include "verifier_cfg.skel.h" #include "verifier_cgroup_inv_retcode.skel.h" #include "verifier_cgroup_skb.skel.h" @@ -170,6 +171,7 @@ void test_verifier_bpf_trap(void) { RUN(verifier_bpf_trap); } void test_verifier_bswap(void) { RUN(verifier_bswap); } void test_verifier_btf_ctx_access(void) { RUN(verifier_btf_ctx_access); } void test_verifier_btf_unreliable_prog(void) { RUN(verifier_btf_unreliable_prog); } +void test_verifier_call_large_imm(void) { RUN(verifier_call_large_imm); } void test_verifier_cfg(void) { RUN(verifier_cfg); } void test_verifier_cgroup_inv_retcode(void) { RUN(verifier_cgroup_inv_retcode); } void test_verifier_cgroup_skb(void) { RUN(verifier_cgroup_skb); } diff --git a/tools/testing/selftests/bpf/progs/verifier_call_large_imm.c b/tools/testing/selftests/bpf/progs/verifier_call_large_imm.c new file mode 100644 index 000000000000..7998df07f6a6 --- /dev/null +++ b/tools/testing/selftests/bpf/progs/verifier_call_large_imm.c @@ -0,0 +1,66 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include "bpf_misc.h" + +int call_happened = 0; + +/* + * 32765 is the exact minimum number of padding instructions needed to + * trigger the verifier failure, because: + * 1. Counting the wrapper instructions around the padding block (one + * "r0=0" and two "exit" instructions), the actual jump distance + * evaluates to N + 3. + * 2. To overflow the s16 max bound (32767), we need N + 3 > 32767. + * Thus, N = 32765 is the exact minimum padding size required. + */ +static __attribute__((noinline)) void padding_subprog(void) +{ + asm volatile ( + "r0 = 0;" + ".rept 32765;" + "r0 += 0;" + ".endr;" + ::: __clobber_all); +} + +static __attribute__((noinline)) int target_subprog(void) +{ + /* Use volatile variable here to prevent optimization. */ + volatile int magic_ret = 3; + return magic_ret; +} + +SEC("syscall") +__success __retval(3) +int call_large_imm_test(void *ctx) +{ + /* + * Landing pad to handle call error on kernel without the fix, + * preventing kernel panic. + */ + asm volatile ( + "r0 = 0;" + ".rept 32768;" + "r0 += 0;" + ".endr;" + ::: __clobber_all); + + /* + * The call_happened variable is 1 only when the call insn wrongly + * go back to the landing pad above. + */ + if (call_happened == 1) { + /* Use volatile variable here to prevent optimization. */ + volatile int flag = -1; + return flag; + } + + call_happened = 1; + + padding_subprog(); + + return target_subprog(); +} + +char LICENSE[] SEC("license") = "GPL"; -- cgit v1.2.3 From 94f3b133168d1c49895e7cc6afbcf1cc0b354602 Mon Sep 17 00:00:00 2001 From: Luxiao Xu Date: Mon, 11 May 2026 18:52:09 +0200 Subject: batman-adv: fix tp_meter counter underflow during shutdown batadv_tp_sender_shutdown() unconditionally decrements the "sending" atomic counter. If multiple paths (e.g. timeout, user cancel, and normal finish) call this function, the counter can underflow to -1. Since the sender logic treats any non-zero value as "still sending", a negative value causes the sender kthread to loop indefinitely. This leads to a use-after-free when the interface is removed while the zombie thread is still active. Fix this by using atomic_xchg() to ensure the counter only transitions from 1 to 0 once. Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Luxiao Xu Signed-off-by: Ren Wei [sven: added missing change in batadv_tp_send] Signed-off-by: Sven Eckelmann --- net/batman-adv/tp_meter.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/tp_meter.c b/net/batman-adv/tp_meter.c index 066c76113fc4..a4397aa881dd 100644 --- a/net/batman-adv/tp_meter.c +++ b/net/batman-adv/tp_meter.c @@ -451,7 +451,7 @@ static void batadv_tp_sender_end(struct batadv_priv *bat_priv, static void batadv_tp_sender_shutdown(struct batadv_tp_vars *tp_vars, enum batadv_tp_meter_reason reason) { - if (!atomic_dec_and_test(&tp_vars->sending)) + if (atomic_xchg(&tp_vars->sending, 0) != 1) return; tp_vars->reason = reason; @@ -885,7 +885,7 @@ static int batadv_tp_send(void *arg) "Meter: %s() cannot send packets (%d)\n", __func__, err); /* ensure nobody else tries to stop the thread now */ - if (atomic_dec_and_test(&tp_vars->sending)) + if (atomic_xchg(&tp_vars->sending, 0) == 1) tp_vars->reason = err; break; } -- cgit v1.2.3 From 77098e4bea37af51d3962efa88a5af2ea5e1ac57 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 10 May 2026 11:31:03 +0200 Subject: batman-adv: tp_meter: fix tp_vars reference leak in receiver shutdown The receiver shutdown timer handler, batadv_tp_receiver_shutdown(), is responsible for releasing the tp_vars reference it holds. However, the existing logic for coordinating this release with batadv_tp_stop_all() was flawed. timer_shutdown_sync() guarantees the timer will not fire again after it returns, but it returns non-zero only when the timer was pending at the time of the call. If the timer had already expired (and batadv_tp_stop_all() would unsucessfully try to rearm itself), batadv_tp_stop_all() skips its batadv_tp_vars_put(), and batadv_tp_receiver_shutdown() fails to put its own reference as well. Fix this by introducing a new atomic variable receiving that is set to 1 when the receiver is initialized and cleared atomically with atomic_xchg() by whichever side claims it first. Only the side that observes the transition from 1 to 0 is responsible for releasing the tp_vars timer reference, eliminating the uncertainty. Cc: stable@kernel.org Fixes: 3d3cf6a7314a ("batman-adv: stop tp_meter sessions during mesh teardown") Signed-off-by: Sven Eckelmann --- net/batman-adv/tp_meter.c | 13 +++++++++++-- net/batman-adv/types.h | 3 +++ 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/tp_meter.c b/net/batman-adv/tp_meter.c index a4397aa881dd..ca6c3f6374bc 100644 --- a/net/batman-adv/tp_meter.c +++ b/net/batman-adv/tp_meter.c @@ -8,6 +8,7 @@ #include "main.h" #include +#include #include #include #include @@ -1156,6 +1157,9 @@ static void batadv_tp_receiver_shutdown(struct timer_list *t) spin_unlock_bh(&tp_vars->unacked_lock); /* drop reference of timer */ + if (WARN_ON(atomic_xchg(&tp_vars->receiving, 0) != 1)) + return; + batadv_tp_vars_put(tp_vars); } @@ -1374,6 +1378,7 @@ batadv_tp_init_recv(struct batadv_priv *bat_priv, ether_addr_copy(tp_vars->other_end, icmp->orig); tp_vars->role = BATADV_TP_RECEIVER; + atomic_set(&tp_vars->receiving, 1); memcpy(tp_vars->session, icmp->session, sizeof(tp_vars->session)); tp_vars->last_recv = BATADV_TP_FIRST_SEQ; tp_vars->bat_priv = bat_priv; @@ -1546,8 +1551,12 @@ void batadv_tp_stop_all(struct batadv_priv *bat_priv) break; case BATADV_TP_RECEIVER: batadv_tp_list_detach(tp_var); - if (timer_shutdown_sync(&tp_var->timer)) - batadv_tp_vars_put(tp_var); + timer_shutdown_sync(&tp_var->timer); + + if (atomic_xchg(&tp_var->receiving, 0) != 1) + break; + + batadv_tp_vars_put(tp_var); break; } diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index daa06f421154..b9c0b7779122 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -1323,6 +1323,9 @@ struct batadv_tp_vars { /** @sending: sending binary semaphore: 1 if sending, 0 is not */ atomic_t sending; + /** @receiving: receiving binary semaphore: 1 if receiving, 0 is not */ + atomic_t receiving; + /** @reason: reason for a stopped session */ enum batadv_tp_meter_reason reason; -- cgit v1.2.3 From 63d2059cd665c4e5e4ca6cfbc58c6f171e7939b1 Mon Sep 17 00:00:00 2001 From: Frank Li Date: Tue, 5 May 2026 12:09:02 -0400 Subject: pinctrl: imx1: Allow parsing DT without function nodes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The old format to define pinctrl settings for imx in DT has two hierarchy levels. The first level are function device nodes. The second level are pingroups which contain a property fsl,pins. The original ntention was to define all pin functions in a single dtsi file and just reference the correct ones in the board files. The commit ("5fcdf6a7ed95e pinctrl: imx: Allow parsing DT without function nodes") already make moden i.MX chip support flatten layout. Make legacy chipes (more than 15 years) support this flatten layout also. Fixes: e948cbdc41d6f ("ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy") Tested-by: Sébastien Szymanski Signed-off-by: Frank Li Signed-off-by: Linus Walleij --- drivers/pinctrl/freescale/pinctrl-imx1-core.c | 48 +++++++++++++++++++++++---- 1 file changed, 41 insertions(+), 7 deletions(-) diff --git a/drivers/pinctrl/freescale/pinctrl-imx1-core.c b/drivers/pinctrl/freescale/pinctrl-imx1-core.c index b36c8a1461b7..b7bd4ef9c0db 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx1-core.c +++ b/drivers/pinctrl/freescale/pinctrl-imx1-core.c @@ -540,10 +540,34 @@ static int imx1_pinctrl_parse_functions(struct device_node *np, return 0; } +/* + * Check if the DT contains pins in the direct child nodes. This indicates the + * newer DT format to store pins. This function returns true if the first found + * fsl,pins property is in a child of np. Otherwise false is returned. + */ +static bool imx1_pinctrl_dt_is_flat_functions(struct device_node *np) +{ + struct device_node *function_np; + struct device_node *pinctrl_np; + + for_each_child_of_node(np, function_np) { + if (of_property_present(function_np, "fsl,pins")) + return true; + + for_each_child_of_node(function_np, pinctrl_np) { + if (of_property_present(pinctrl_np, "fsl,pins")) + return false; + } + } + + return true; +} + static int imx1_pinctrl_parse_dt(struct platform_device *pdev, struct imx1_pinctrl *pctl, struct imx1_pinctrl_soc_info *info) { struct device_node *np = pdev->dev.of_node; + bool flat_funcs; int ret; u32 nfuncs = 0; u32 ngroups = 0; @@ -552,9 +576,15 @@ static int imx1_pinctrl_parse_dt(struct platform_device *pdev, if (!np) return -ENODEV; - for_each_child_of_node_scoped(np, child) { - ++nfuncs; - ngroups += of_get_child_count(child); + flat_funcs = imx1_pinctrl_dt_is_flat_functions(np); + if (flat_funcs) { + nfuncs = 1; + ngroups = of_get_child_count(np); + } else { + for_each_child_of_node_scoped(np, child) { + ++nfuncs; + ngroups += of_get_child_count(child); + } } if (!nfuncs) { @@ -574,10 +604,14 @@ static int imx1_pinctrl_parse_dt(struct platform_device *pdev, if (!info->functions || !info->groups) return -ENOMEM; - for_each_child_of_node_scoped(np, child) { - ret = imx1_pinctrl_parse_functions(child, info, ifunc++); - if (ret == -ENOMEM) - return -ENOMEM; + if (flat_funcs) { + imx1_pinctrl_parse_functions(np, info, 0); + } else { + for_each_child_of_node_scoped(np, child) { + ret = imx1_pinctrl_parse_functions(child, info, ifunc++); + if (ret == -ENOMEM) + return -ENOMEM; + } } return 0; -- cgit v1.2.3 From 3a8389d42bdf4213730f4067f8bfa78bae6564ef Mon Sep 17 00:00:00 2001 From: Johannes Thumshirn Date: Wed, 29 Apr 2026 22:58:15 +0200 Subject: zonefs: handle integer overflow in zonefs_fname_to_fno In zonefs the file name in one of the two directories corresponds to the zone number. Here Alexey reported a possible integer overflow in zonefs_fname_to_fno(), where the parsing of the zone number from the file name can overflow the 'long' data type. Add a check for integer overflows and if the fno 'long' did overflow return -ENOENT. Reported-by: Alexey Dobriyan Fixes: d207794ababe ("zonefs: Dynamically create file inodes when needed") Signed-off-by: Johannes Thumshirn Signed-off-by: Damien Le Moal --- fs/zonefs/super.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c index 9b646cb5335d..ff43d6d1ea30 100644 --- a/fs/zonefs/super.c +++ b/fs/zonefs/super.c @@ -610,10 +610,14 @@ static long zonefs_fname_to_fno(const struct qstr *fname) return c - '0'; for (i = 0, rname = name + len - 1; i < len; i++, rname--) { + long digit; + c = *rname; if (!isdigit(c)) return -ENOENT; - fno += (c - '0') * shift; + digit = (c - '0') * shift; + if (check_add_overflow(fno, digit, &fno)) + return -ENOENT; shift *= 10; } -- cgit v1.2.3 From 83dd9effefa2e9da58ccd37059a11820fc05caf4 Mon Sep 17 00:00:00 2001 From: Florian Eckert Date: Fri, 17 Apr 2026 10:35:45 +0200 Subject: MAINTAINERS: Remove Chuanhua Lei as PCIe intel-gw maintainer Chuanhua Lei's email address has been bouncing for months. Remove the entry and mark the PCI intel-gw driver as orphaned. Signed-off-by: Florian Eckert Signed-off-by: Manivannan Sadhasivam Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/20260417-pcie-intel-gw-v5-1-0a2b933fe04f@dev.tdt.de --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2fb1c75afd16..ab2f91f62c54 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20693,9 +20693,8 @@ F: Documentation/devicetree/bindings/pci/intel,keembay-pcie* F: drivers/pci/controller/dwc/pcie-keembay.c PCIE DRIVER FOR INTEL LGM GW SOC -M: Chuanhua Lei L: linux-pci@vger.kernel.org -S: Maintained +S: Orphan F: Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml F: drivers/pci/controller/dwc/pcie-intel-gw.c -- cgit v1.2.3 From 1e9fab756f8395096d5bba7be0c373c4c8f5d165 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 May 2026 19:08:37 +0200 Subject: batman-adv: tt: reject oversized local TVLV buffers The commit 3a359bf5c61d ("batman-adv: reject oversized global TT response buffers") added a check to ensure that a global return buffer size can be stored in an u16. The same buffer handling also exists for the local data buffer but was not touched. A similar check should be also be in place for the local TVLV buffer. It doesn't have the similar attack surface because it is only generated from locally discovered MAC addresses but the dynamic nature could still cause temporarily to large buffers. Cc: stable@kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann --- net/batman-adv/translation-table.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 05cddcf994f6..06548dae1039 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -877,12 +877,12 @@ batadv_tt_prepare_tvlv_local_data(struct batadv_priv *bat_priv, { struct batadv_tvlv_tt_vlan_data *tt_vlan; struct batadv_meshif_vlan *vlan; + size_t change_offset; u16 num_vlan = 0; u16 vlan_entries = 0; u16 total_entries = 0; u16 tvlv_len; u8 *tt_change_ptr; - int change_offset; spin_lock_bh(&bat_priv->meshif_vlan_list_lock); hlist_for_each_entry(vlan, &bat_priv->meshif_vlan_list, list) { @@ -900,8 +900,10 @@ batadv_tt_prepare_tvlv_local_data(struct batadv_priv *bat_priv, if (*tt_len < 0) *tt_len = batadv_tt_len(total_entries); - tvlv_len = *tt_len; - tvlv_len += change_offset; + if (check_add_overflow(*tt_len, change_offset, &tvlv_len)) { + tvlv_len = 0; + goto out; + } *tt_data = kmalloc(tvlv_len, GFP_ATOMIC); if (!*tt_data) { -- cgit v1.2.3 From b64963a2ceeb7529310b6cf253a1e540784422f4 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 May 2026 19:53:21 +0200 Subject: batman-adv: tt: fix negative tt_buff_len batadv_orig_node::tt_buff_len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_other_tt_response(), tt_buff_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_global_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_other_tt_response(). Cc: stable@kernel.org Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann --- net/batman-adv/types.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index b9c0b7779122..888f337a194b 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -452,7 +452,7 @@ struct batadv_orig_node { * @tt_buff_len: length of the last tt changeset this node received * from the orig node */ - s16 tt_buff_len; + u16 tt_buff_len; /** @tt_buff_lock: lock that protects tt_buff and tt_buff_len */ spinlock_t tt_buff_lock; -- cgit v1.2.3 From fc92cdfcb295cefa4344d71a527d61b638b7bfc4 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 May 2026 19:53:21 +0200 Subject: batman-adv: tt: fix negative last_changeset_len batadv_piv_tt::last_changeset_len len was declared as s16, but the field is never intended to hold a negative value. When a value greater than 32767 is assigned, it wraps to a negative signed integer. In batadv_send_my_tt_response(), last_changeset_len is temporarily widened to s32. The incorrectly negative s16 value propagates into the s32, causing batadv_tt_prepare_tvlv_local_data() to allocate a full sized buffer but populates only a small portion of it with the collected changeset. All remaining bits are kept uninitialized. Using an u16 avoids this type confusion and ensures that no (negative) sign extension is performed in batadv_send_my_tt_response(). Cc: stable@kernel.org Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism") Signed-off-by: Sven Eckelmann --- net/batman-adv/types.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 888f337a194b..739439e2b235 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -993,7 +993,7 @@ struct batadv_priv_tt { * @last_changeset_len: length of last tt changeset this host has * generated */ - s16 last_changeset_len; + u16 last_changeset_len; /** * @last_changeset_lock: lock protecting last_changeset & -- cgit v1.2.3 From 94d27005016be15ffc638b2ecbc4d58805ad7b48 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 May 2026 19:47:11 +0200 Subject: batman-adv: tt: fix TOCTOU race for reported vlans The local TT based TVLV is generated by first checking the number of VLANs which have at least one TT entry. A new buffer with the correct size for the VLANs is then allocated. Only then, the list of VLANs s used to fill the VLAN entries in the buffer. During this time, the meshif_vlan_list_lock is held. But the actual number of TT entries of each VLAN can still increase during this time - just not the number of VLANs in the list. But the prefilter used in the buffer size calculation might still cause an increase of the number of VLANs which need to be stored. Simply because a VLAN might now suddenly have at least one entry when it had none in the pre-alloc check - and then needs to occupy space which was not allocated. It is better to overestimate the buffer size at the beginning and then fill the buffer only with the VLANs which are not empty. Cc: stable@kernel.org Fixes: 16116dac2339 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs") Signed-off-by: Sven Eckelmann --- net/batman-adv/translation-table.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 06548dae1039..f009cbf8a276 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -887,11 +887,8 @@ batadv_tt_prepare_tvlv_local_data(struct batadv_priv *bat_priv, spin_lock_bh(&bat_priv->meshif_vlan_list_lock); hlist_for_each_entry(vlan, &bat_priv->meshif_vlan_list, list) { vlan_entries = atomic_read(&vlan->tt.num_entries); - if (vlan_entries < 1) - continue; - - num_vlan++; total_entries += vlan_entries; + num_vlan++; } change_offset = struct_size(*tt_data, vlan_data, num_vlan); @@ -916,6 +913,7 @@ batadv_tt_prepare_tvlv_local_data(struct batadv_priv *bat_priv, (*tt_data)->num_vlan = htons(num_vlan); tt_vlan = (*tt_data)->vlan_data; + num_vlan = 0; hlist_for_each_entry(vlan, &bat_priv->meshif_vlan_list, list) { vlan_entries = atomic_read(&vlan->tt.num_entries); if (vlan_entries < 1) @@ -926,8 +924,15 @@ batadv_tt_prepare_tvlv_local_data(struct batadv_priv *bat_priv, tt_vlan->reserved = 0; tt_vlan++; + num_vlan++; } + /* recalculate in case number of VLANs reduced */ + change_offset = struct_size(*tt_data, vlan_data, num_vlan); + tvlv_len = *tt_len + change_offset; + + (*tt_data)->num_vlan = htons(num_vlan); + tt_change_ptr = (u8 *)*tt_data + change_offset; *tt_change = (struct batadv_tvlv_tt_change *)tt_change_ptr; -- cgit v1.2.3 From fa1bd704940b5bcbc32c0b28db9167405c8ee5e0 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 May 2026 20:47:34 +0200 Subject: batman-adv: tt: avoid empty VLAN responses The commit 16116dac2339 ("batman-adv: prevent TT request storms by not sending inconsistent TT TLVLs") added checks to the local (direct) TT response code. But the response can also be done indirectly by another node using the global TT state. To avoid such inconsistency states reported in the original fix, also avoid sending empty VLANs for replies from the global TT state. Cc: stable@kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann --- net/batman-adv/translation-table.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index f009cbf8a276..2259b241e0b5 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -797,24 +797,26 @@ batadv_tt_prepare_tvlv_global_data(struct batadv_orig_node *orig_node, s32 *tt_len) { u16 num_vlan = 0; - u16 num_entries = 0; u16 tvlv_len = 0; unsigned int change_offset; struct batadv_tvlv_tt_vlan_data *tt_vlan; struct batadv_orig_node_vlan *vlan; + u16 total_entries = 0; u8 *tt_change_ptr; + int vlan_entries; spin_lock_bh(&orig_node->vlan_list_lock); hlist_for_each_entry(vlan, &orig_node->vlan_list, list) { + vlan_entries = atomic_read(&vlan->tt.num_entries); + total_entries += vlan_entries; num_vlan++; - num_entries += atomic_read(&vlan->tt.num_entries); } change_offset = struct_size(*tt_data, vlan_data, num_vlan); /* if tt_len is negative, allocate the space needed by the full table */ if (*tt_len < 0) - *tt_len = batadv_tt_len(num_entries); + *tt_len = batadv_tt_len(total_entries); if (change_offset > U16_MAX || *tt_len > U16_MAX - change_offset) { *tt_len = 0; @@ -835,14 +837,26 @@ batadv_tt_prepare_tvlv_global_data(struct batadv_orig_node *orig_node, (*tt_data)->num_vlan = htons(num_vlan); tt_vlan = (*tt_data)->vlan_data; + num_vlan = 0; hlist_for_each_entry(vlan, &orig_node->vlan_list, list) { + vlan_entries = atomic_read(&vlan->tt.num_entries); + if (vlan_entries < 1) + continue; + tt_vlan->vid = htons(vlan->vid); tt_vlan->crc = htonl(vlan->tt.crc); tt_vlan->reserved = 0; tt_vlan++; + num_vlan++; } + /* recalculate in case number of VLANs reduced */ + change_offset = struct_size(*tt_data, vlan_data, num_vlan); + tvlv_len = *tt_len + change_offset; + + (*tt_data)->num_vlan = htons(num_vlan); + tt_change_ptr = (u8 *)*tt_data + change_offset; *tt_change = (struct batadv_tvlv_tt_change *)tt_change_ptr; -- cgit v1.2.3 From 99d9958fa10fb684b2a8e2c48a8d704122721420 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 2 May 2026 21:25:19 +0200 Subject: batman-adv: tt: prevent TVLV entry number overflow The helpers to prepare the buffers for the local and global TT based replies are trying to sum up all TT entries which can be found for each VLAN. In theory, this sum can be too big for an u16 and therefore overflow. A too small buffer would then be allocated for the TVLV. The too small buffer will be handled gracefully by batadv_tt_tvlv_generate() and is not causing a buffer overflow - just a truncated reply. But this overflow shouldn't have happened in the first and the too small buffer should never have been allocated when an overflow was detected. Cc: stable@kernel.org Fixes: 7ea7b4a14275 ("batman-adv: make the TT CRC logic VLAN specific") Signed-off-by: Sven Eckelmann --- net/batman-adv/translation-table.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c index 2259b241e0b5..9f6e67771ffa 100644 --- a/net/batman-adv/translation-table.c +++ b/net/batman-adv/translation-table.c @@ -804,11 +804,18 @@ batadv_tt_prepare_tvlv_global_data(struct batadv_orig_node *orig_node, u16 total_entries = 0; u8 *tt_change_ptr; int vlan_entries; + u16 sum_entries; spin_lock_bh(&orig_node->vlan_list_lock); hlist_for_each_entry(vlan, &orig_node->vlan_list, list) { vlan_entries = atomic_read(&vlan->tt.num_entries); - total_entries += vlan_entries; + + if (check_add_overflow(vlan_entries, total_entries, &sum_entries)) { + *tt_len = 0; + goto out; + } + + total_entries = sum_entries; num_vlan++; } @@ -893,15 +900,22 @@ batadv_tt_prepare_tvlv_local_data(struct batadv_priv *bat_priv, struct batadv_meshif_vlan *vlan; size_t change_offset; u16 num_vlan = 0; - u16 vlan_entries = 0; u16 total_entries = 0; u16 tvlv_len; u8 *tt_change_ptr; + int vlan_entries; + u16 sum_entries; spin_lock_bh(&bat_priv->meshif_vlan_list_lock); hlist_for_each_entry(vlan, &bat_priv->meshif_vlan_list, list) { vlan_entries = atomic_read(&vlan->tt.num_entries); - total_entries += vlan_entries; + + if (check_add_overflow(vlan_entries, total_entries, &sum_entries)) { + tvlv_len = 0; + goto out; + } + + total_entries = sum_entries; num_vlan++; } -- cgit v1.2.3 From 859c199bb3a90ec49a678cc0846694b06703bdde Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Wed, 29 Apr 2026 06:09:37 -0700 Subject: fs/select: reject negative timeval components in kern_select() kern_select() normalises the user-supplied struct __kernel_old_timeval with tv.tv_sec + (tv.tv_usec / USEC_PER_SEC) (tv.tv_usec % USEC_PER_SEC) * NSEC_PER_USEC before calling poll_select_set_timeout() -> timespec64_valid(). Both operands of the seconds sum are unbounded user-controlled signed long. A crafted pair where tv_usec is a negative multiple of USEC_PER_SEC drives the sum across the wrap boundary - e.g. { .tv_sec = LONG_MIN, .tv_usec = -1000000 } yields sec = LONG_MAX, nsec = 0, which passes timespec64_valid() and then flows through timespec64_add_safe(), which saturates the absolute deadline to TIME64_MAX (clamped further to KTIME_MAX downstream). select(2) therefore blocks effectively forever instead of returning -EINVAL as POSIX requires for a negative timeout. Only the legacy __NR_select syscall takes this path. pselect6, ppoll, poll and epoll_pwait2 all hand the user's two fields directly to poll_select_set_timeout(), which validates *before* doing any arithmetic: /* fs/select.c:271 -- the validator */ int poll_select_set_timeout(struct timespec64 *to, time64_t sec, long nsec) { struct timespec64 ts = {.tv_sec = sec, .tv_nsec = nsec}; if (!timespec64_valid(&ts)) return -EINVAL; ... } /* include/linux/time64.h:97 -- timespec64_valid */ if (ts->tv_sec < 0) return false; if ((unsigned long)ts->tv_nsec >= NSEC_PER_SEC) return false; /* fs/select.c:744 do_pselect() (pselect6, pselect6_time32) */ if (get_timespec64(&ts, tsp)) return -EFAULT; if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec)) return -EINVAL; /* fs/select.c:1097 ppoll */ if (get_timespec64(&ts, tsp)) return -EFAULT; if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec)) return -EINVAL; /* fs/select.c:1065 poll -- timeout_msecs is int; >= 0 gates the math */ if (timeout_msecs >= 0) poll_select_set_timeout(to, timeout_msecs / MSEC_PER_SEC, NSEC_PER_MSEC * (timeout_msecs % MSEC_PER_SEC)); /* fs/eventpoll.c:2512 epoll_pwait2 */ if (get_timespec64(&ts, timeout)) return -EFAULT; if (poll_select_set_timeout(to, ts.tv_sec, ts.tv_nsec)) return -EINVAL; In every one of these the wrap-prone arithmetic from kern_select() simply does not exist; the user fields reach timespec64_valid() unmodified. glibc routes the C-library select() through pselect6, so the bug is reachable only via a direct syscall(__NR_select, ...). The pre-validation negative check that used to live here was lost when the syscall was switched to the poll_select_set_timeout() helper. Restore it: reject tv_sec < 0 || tv_usec < 0 up front, mirroring what glibc does in userspace. do_compat_select() has the same arithmetic pattern but is only reachable on 32-bit compat and from a different syscall entry; left for a follow-up so this change stays minimal. Reproducer (returns -1/EINVAL on a fixed kernel; blocks indefinitely on an unfixed one): struct timeval tv = { .tv_sec = LONG_MIN, .tv_usec = -1000000 }; fd_set r; int pfd[2]; pipe(pfd); FD_ZERO(&r); FD_SET(pfd[0], &r); syscall(__NR_select, pfd[0] + 1, &r, NULL, NULL, &tv); Fixes: 4d36a9e65d49 ("select: deal with math overflow from borderline valid userland data") Signed-off-by: Breno Leitao Link: https://patch.msgid.link/20260429-timeval-v1-1-4448e2588bbf@debian.org Reviewed-by: Jan Kara Signed-off-by: Christian Brauner --- fs/select.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/fs/select.c b/fs/select.c index 75978b18f48f..bf71c9838dfe 100644 --- a/fs/select.c +++ b/fs/select.c @@ -708,6 +708,17 @@ static int kern_select(int n, fd_set __user *inp, fd_set __user *outp, if (copy_from_user(&tv, tvp, sizeof(tv))) return -EFAULT; + /* + * Reject negative components before normalisation. The seconds + * sum below is performed in signed long and a crafted negative + * timeval can wrap to a positive value that passes + * timespec64_valid() and turns into an effectively-infinite + * deadline via timespec64_add_safe()'s saturation, instead of + * the -EINVAL POSIX requires for negative timeouts. + */ + if (tv.tv_sec < 0 || tv.tv_usec < 0) + return -EINVAL; + to = &end_time; if (poll_select_set_timeout(to, tv.tv_sec + (tv.tv_usec / USEC_PER_SEC), -- cgit v1.2.3 From 6f0f7ac1915abc0d202f0eb4b003a6548a5ba60d Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:38 +0100 Subject: netfs: Fix cancellation of a DIO and single read subrequests When the preparation of a new subrequest for a read fails, if the subrequest has already been added to the stream->subrequests list, it can't simply be put and abandoned as the collector may see it. Also, if it hasn't been queued yet, it has two outstanding refs that both need to be put. Both DIO read and single-read dispatch fail at this; further, both differ in the order they do things to the way buffered read works. Fix cancellation of both DIO-read and single-read subrequests that failed preparation by the following steps: (1) Harmonise all three reads (buffered, dio, single) to queue the subreq before prepping it. (2) Make all three call netfs_queue_read() to do the queuing. (3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't know the length of the subreq at this point. (4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq and then call netfs_read_subreq_terminated() to deal with it. This will pass responsibility off to the collector for dealing with it. Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item") Closes: https://sashiko.dev/#/patchset/20260425125426.3855807-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-2-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_read.c | 34 +++++++++++++--------------------- fs/netfs/direct_read.c | 42 +++++++++++++----------------------------- fs/netfs/internal.h | 3 +++ fs/netfs/read_collect.c | 11 +++++++++++ fs/netfs/read_single.c | 23 ++++++++++------------- 5 files changed, 50 insertions(+), 63 deletions(-) diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index a8c0d86118c5..a27ed501b6d4 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -156,9 +156,8 @@ static void netfs_read_cache_to_pagecache(struct netfs_io_request *rreq, netfs_cache_read_terminated, subreq); } -static void netfs_queue_read(struct netfs_io_request *rreq, - struct netfs_io_subrequest *subreq, - bool last_subreq) +void netfs_queue_read(struct netfs_io_request *rreq, + struct netfs_io_subrequest *subreq) { struct netfs_io_stream *stream = &rreq->io_streams[0]; @@ -178,11 +177,6 @@ static void netfs_queue_read(struct netfs_io_request *rreq, } } - if (last_subreq) { - smp_wmb(); /* Write lists before ALL_QUEUED. */ - set_bit(NETFS_RREQ_ALL_QUEUED, &rreq->flags); - } - spin_unlock(&rreq->lock); } @@ -233,6 +227,8 @@ static void netfs_read_to_pagecache(struct netfs_io_request *rreq, subreq->start = start; subreq->len = size; + netfs_queue_read(rreq, subreq); + source = netfs_cache_prepare_read(rreq, subreq, rreq->i_size); subreq->source = source; if (source == NETFS_DOWNLOAD_FROM_SERVER) { @@ -253,6 +249,7 @@ static void netfs_read_to_pagecache(struct netfs_io_request *rreq, rreq->debug_id, subreq->debug_index, subreq->len, size, subreq->start, ictx->zero_point, rreq->i_size); + netfs_cancel_read(subreq, ret); break; } subreq->len = len; @@ -261,12 +258,7 @@ static void netfs_read_to_pagecache(struct netfs_io_request *rreq, if (rreq->netfs_ops->prepare_read) { ret = rreq->netfs_ops->prepare_read(subreq); if (ret < 0) { - subreq->error = ret; - /* Not queued - release both refs. */ - netfs_put_subrequest(subreq, - netfs_sreq_trace_put_cancel); - netfs_put_subrequest(subreq, - netfs_sreq_trace_put_cancel); + netfs_cancel_read(subreq, ret); break; } trace_netfs_sreq(subreq, netfs_sreq_trace_prepare); @@ -289,23 +281,23 @@ static void netfs_read_to_pagecache(struct netfs_io_request *rreq, pr_err("Unexpected read source %u\n", source); WARN_ON_ONCE(1); + netfs_cancel_read(subreq, ret); break; issue: slice = netfs_prepare_read_iterator(subreq, ractl); if (slice < 0) { ret = slice; - subreq->error = ret; - trace_netfs_sreq(subreq, netfs_sreq_trace_cancel); - /* Not queued - release both refs. */ - netfs_put_subrequest(subreq, netfs_sreq_trace_put_cancel); - netfs_put_subrequest(subreq, netfs_sreq_trace_put_cancel); + netfs_cancel_read(subreq, ret); break; } - size -= slice; start += slice; + size -= slice; + if (size <= 0) { + smp_wmb(); /* Write lists before ALL_QUEUED. */ + set_bit(NETFS_RREQ_ALL_QUEUED, &rreq->flags); + } - netfs_queue_read(rreq, subreq, size <= 0); netfs_issue_read(rreq, subreq); cond_resched(); } while (size > 0); diff --git a/fs/netfs/direct_read.c b/fs/netfs/direct_read.c index f72e6da88cca..6a8fb0d55e04 100644 --- a/fs/netfs/direct_read.c +++ b/fs/netfs/direct_read.c @@ -45,12 +45,11 @@ static void netfs_prepare_dio_read_iterator(struct netfs_io_subrequest *subreq) * Perform a read to a buffer from the server, slicing up the region to be read * according to the network rsize. */ -static int netfs_dispatch_unbuffered_reads(struct netfs_io_request *rreq) +static void netfs_dispatch_unbuffered_reads(struct netfs_io_request *rreq) { - struct netfs_io_stream *stream = &rreq->io_streams[0]; unsigned long long start = rreq->start; ssize_t size = rreq->len; - int ret = 0; + int ret; do { struct netfs_io_subrequest *subreq; @@ -58,7 +57,10 @@ static int netfs_dispatch_unbuffered_reads(struct netfs_io_request *rreq) subreq = netfs_alloc_subrequest(rreq); if (!subreq) { - ret = -ENOMEM; + /* Stash the error in the request if there's not + * already an error set. + */ + cmpxchg(&rreq->error, 0, -ENOMEM); break; } @@ -66,25 +68,13 @@ static int netfs_dispatch_unbuffered_reads(struct netfs_io_request *rreq) subreq->start = start; subreq->len = size; - __set_bit(NETFS_SREQ_IN_PROGRESS, &subreq->flags); - - spin_lock(&rreq->lock); - list_add_tail(&subreq->rreq_link, &stream->subrequests); - if (list_is_first(&subreq->rreq_link, &stream->subrequests)) { - if (!stream->active) { - stream->collected_to = subreq->start; - /* Store list pointers before active flag */ - smp_store_release(&stream->active, true); - } - } - trace_netfs_sreq(subreq, netfs_sreq_trace_added); - spin_unlock(&rreq->lock); + netfs_queue_read(rreq, subreq); netfs_stat(&netfs_n_rh_download); if (rreq->netfs_ops->prepare_read) { ret = rreq->netfs_ops->prepare_read(subreq); if (ret < 0) { - netfs_put_subrequest(subreq, netfs_sreq_trace_put_cancel); + netfs_cancel_read(subreq, ret); break; } } @@ -113,8 +103,6 @@ static int netfs_dispatch_unbuffered_reads(struct netfs_io_request *rreq) set_bit(NETFS_RREQ_ALL_QUEUED, &rreq->flags); netfs_wake_collector(rreq); } - - return ret; } /* @@ -137,21 +125,17 @@ static ssize_t netfs_unbuffered_read(struct netfs_io_request *rreq, bool sync) // TODO: Use bounce buffer if requested inode_dio_begin(rreq->inode); + netfs_dispatch_unbuffered_reads(rreq); - ret = netfs_dispatch_unbuffered_reads(rreq); - - if (!rreq->submitted) { - netfs_put_request(rreq, netfs_rreq_trace_put_no_submit); - inode_dio_end(rreq->inode); - ret = 0; - goto out; - } + /* The collector will get run, even if we don't manage to submit any + * subreqs, so we shouldn't call inode_dio_end() here. + */ if (sync) ret = netfs_wait_for_read(rreq); else ret = -EIOCBQUEUED; -out: + _leave(" = %zd", ret); return ret; } diff --git a/fs/netfs/internal.h b/fs/netfs/internal.h index d436e20d3418..645996ecfc80 100644 --- a/fs/netfs/internal.h +++ b/fs/netfs/internal.h @@ -23,6 +23,8 @@ /* * buffered_read.c */ +void netfs_queue_read(struct netfs_io_request *rreq, + struct netfs_io_subrequest *subreq); void netfs_cache_read_terminated(void *priv, ssize_t transferred_or_error); int netfs_prefetch_for_write(struct file *file, struct folio *folio, size_t offset, size_t len); @@ -108,6 +110,7 @@ static inline void netfs_see_subrequest(struct netfs_io_subrequest *subreq, */ bool netfs_read_collection(struct netfs_io_request *rreq); void netfs_read_collection_worker(struct work_struct *work); +void netfs_cancel_read(struct netfs_io_subrequest *subreq, int error); void netfs_cache_read_terminated(void *priv, ssize_t transferred_or_error); /* diff --git a/fs/netfs/read_collect.c b/fs/netfs/read_collect.c index e5f6665b3341..d2d902f46627 100644 --- a/fs/netfs/read_collect.c +++ b/fs/netfs/read_collect.c @@ -575,6 +575,17 @@ skip_error_checks: } EXPORT_SYMBOL(netfs_read_subreq_terminated); +/* + * Cancel a read subrequest due to preparation failure. + */ +void netfs_cancel_read(struct netfs_io_subrequest *subreq, int error) +{ + trace_netfs_sreq(subreq, netfs_sreq_trace_cancel); + subreq->error = error; + __set_bit(NETFS_SREQ_FAILED, &subreq->flags); + netfs_read_subreq_terminated(subreq); +} + /* * Handle termination of a read from the cache. */ diff --git a/fs/netfs/read_single.c b/fs/netfs/read_single.c index d0e23bc42445..8833550d2eb6 100644 --- a/fs/netfs/read_single.c +++ b/fs/netfs/read_single.c @@ -89,7 +89,6 @@ static void netfs_single_read_cache(struct netfs_io_request *rreq, */ static int netfs_single_dispatch_read(struct netfs_io_request *rreq) { - struct netfs_io_stream *stream = &rreq->io_streams[0]; struct netfs_io_subrequest *subreq; int ret = 0; @@ -102,14 +101,7 @@ static int netfs_single_dispatch_read(struct netfs_io_request *rreq) subreq->len = rreq->len; subreq->io_iter = rreq->buffer.iter; - __set_bit(NETFS_SREQ_IN_PROGRESS, &subreq->flags); - - spin_lock(&rreq->lock); - list_add_tail(&subreq->rreq_link, &stream->subrequests); - trace_netfs_sreq(subreq, netfs_sreq_trace_added); - /* Store list pointers before active flag */ - smp_store_release(&stream->active, true); - spin_unlock(&rreq->lock); + netfs_queue_read(rreq, subreq); netfs_single_cache_prepare_read(rreq, subreq); switch (subreq->source) { @@ -121,10 +113,14 @@ static int netfs_single_dispatch_read(struct netfs_io_request *rreq) goto cancel; } + smp_wmb(); /* Write lists before ALL_QUEUED. */ + set_bit(NETFS_RREQ_ALL_QUEUED, &rreq->flags); rreq->netfs_ops->issue_read(subreq); rreq->submitted += subreq->len; break; case NETFS_READ_FROM_CACHE: + smp_wmb(); /* Write lists before ALL_QUEUED. */ + set_bit(NETFS_RREQ_ALL_QUEUED, &rreq->flags); trace_netfs_sreq(subreq, netfs_sreq_trace_submit); netfs_single_read_cache(rreq, subreq); rreq->submitted += subreq->len; @@ -134,14 +130,15 @@ static int netfs_single_dispatch_read(struct netfs_io_request *rreq) pr_warn("Unexpected single-read source %u\n", subreq->source); WARN_ON_ONCE(true); ret = -EIO; - break; + goto cancel; } - smp_wmb(); /* Write lists before ALL_QUEUED. */ - set_bit(NETFS_RREQ_ALL_QUEUED, &rreq->flags); return ret; cancel: - netfs_put_subrequest(subreq, netfs_sreq_trace_put_cancel); + netfs_cancel_read(subreq, ret); + smp_wmb(); /* Write lists before ALL_QUEUED. */ + set_bit(NETFS_RREQ_ALL_QUEUED, &rreq->flags); + netfs_wake_collector(rreq); return ret; } -- cgit v1.2.3 From cce18c263e9623872327ba3c956012f73c1179cc Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:39 +0100 Subject: netfs: Fix missing locking around retry adding new subreqs Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take the appropriate lock when adding extra subrequests into stream->subrequests. Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item") Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Closes: https://sashiko.dev/#/patchset/20260425125426.3855807-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-3-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/read_retry.c | 6 +++++- fs/netfs/write_retry.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/fs/netfs/read_retry.c b/fs/netfs/read_retry.c index cca9ac43c077..5ec548b996d6 100644 --- a/fs/netfs/read_retry.c +++ b/fs/netfs/read_retry.c @@ -175,7 +175,9 @@ static void netfs_retry_read_subrequests(struct netfs_io_request *rreq) list_for_each_entry_safe_from(subreq, tmp, &stream->subrequests, rreq_link) { trace_netfs_sreq(subreq, netfs_sreq_trace_superfluous); + spin_lock(&rreq->lock); list_del(&subreq->rreq_link); + spin_unlock(&rreq->lock); netfs_put_subrequest(subreq, netfs_sreq_trace_put_done); if (subreq == to) break; @@ -203,8 +205,10 @@ static void netfs_retry_read_subrequests(struct netfs_io_request *rreq) refcount_read(&subreq->ref), netfs_sreq_trace_new); + spin_lock(&rreq->lock); list_add(&subreq->rreq_link, &to->rreq_link); - to = list_next_entry(to, rreq_link); + spin_unlock(&rreq->lock); + to = subreq; trace_netfs_sreq(subreq, netfs_sreq_trace_retry); stream->sreq_max_len = umin(len, rreq->rsize); diff --git a/fs/netfs/write_retry.c b/fs/netfs/write_retry.c index 29489a23a220..32735abfa03f 100644 --- a/fs/netfs/write_retry.c +++ b/fs/netfs/write_retry.c @@ -130,7 +130,9 @@ static void netfs_retry_write_stream(struct netfs_io_request *wreq, list_for_each_entry_safe_from(subreq, tmp, &stream->subrequests, rreq_link) { trace_netfs_sreq(subreq, netfs_sreq_trace_discard); + spin_lock(&wreq->lock); list_del(&subreq->rreq_link); + spin_unlock(&wreq->lock); netfs_put_subrequest(subreq, netfs_sreq_trace_put_done); if (subreq == to) break; @@ -153,8 +155,10 @@ static void netfs_retry_write_stream(struct netfs_io_request *wreq, netfs_sreq_trace_new); trace_netfs_sreq(subreq, netfs_sreq_trace_split); + spin_lock(&wreq->lock); list_add(&subreq->rreq_link, &to->rreq_link); - to = list_next_entry(to, rreq_link); + spin_unlock(&wreq->lock); + to = subreq; trace_netfs_sreq(subreq, netfs_sreq_trace_retry); stream->sreq_max_len = len; -- cgit v1.2.3 From b5782e2d462c028096f922abca46318cec890670 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:40 +0100 Subject: netfs: Fix missing barriers when accessing stream->subrequests locklessly The list of subrequests attached to stream->subrequests is accessed without locks by netfs_collect_read_results() and netfs_collect_write_results(), and then they access subreq->flags without taking a barrier after getting the subreq pointer from the list. Relatedly, the functions that build the list don't use any sort of write barrier when constructing the list to make sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if no lock is taken. Fix this by: (1) Add a new list_add_tail_release() function that uses a release barrier to set the pointer to the new member of the list. (2) Add a new list_first_entry_or_null_acquire() function that uses an acquire barrier to read the pointer to the first member in a list (or return NULL). (3) Use list_add_tail_release() when adding a subreq to ->subrequests. (4) Use list_first_entry_or_null_acquire() when initially accessing the front of the list (when an item is removed, the pointer to the new front iterm is obtained under the same lock). Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item") Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Link: https://sashiko.dev/#/patchset/20260326104544.509518-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-4-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_read.c | 3 ++- fs/netfs/misc.c | 1 + fs/netfs/read_collect.c | 6 ++++-- fs/netfs/write_collect.c | 6 ++++-- fs/netfs/write_issue.c | 3 ++- include/linux/list.h | 37 +++++++++++++++++++++++++++++++++++++ 6 files changed, 50 insertions(+), 6 deletions(-) diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index a27ed501b6d4..15d73026ff64 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -168,7 +168,8 @@ void netfs_queue_read(struct netfs_io_request *rreq, * remove entries off of the front. */ spin_lock(&rreq->lock); - list_add_tail(&subreq->rreq_link, &stream->subrequests); + /* Write IN_PROGRESS before pointer to new subreq */ + list_add_tail_release(&subreq->rreq_link, &stream->subrequests); if (list_is_first(&subreq->rreq_link, &stream->subrequests)) { if (!stream->active) { stream->collected_to = subreq->start; diff --git a/fs/netfs/misc.c b/fs/netfs/misc.c index 6df89c92b10b..21357907b7ee 100644 --- a/fs/netfs/misc.c +++ b/fs/netfs/misc.c @@ -356,6 +356,7 @@ void netfs_wait_for_in_progress_stream(struct netfs_io_request *rreq, DEFINE_WAIT(myself); list_for_each_entry(subreq, &stream->subrequests, rreq_link) { + smp_rmb(); /* Read ->next before IN_PROGRESS. */ if (!netfs_check_subreq_in_progress(subreq)) continue; diff --git a/fs/netfs/read_collect.c b/fs/netfs/read_collect.c index d2d902f46627..3c9b847885c2 100644 --- a/fs/netfs/read_collect.c +++ b/fs/netfs/read_collect.c @@ -205,8 +205,10 @@ reassess: * in progress. The issuer thread may be adding stuff to the tail * whilst we're doing this. */ - front = list_first_entry_or_null(&stream->subrequests, - struct netfs_io_subrequest, rreq_link); + front = list_first_entry_or_null_acquire(&stream->subrequests, + struct netfs_io_subrequest, rreq_link); + /* Read first subreq pointer before IN_PROGRESS flag. */ + while (front) { size_t transferred; diff --git a/fs/netfs/write_collect.c b/fs/netfs/write_collect.c index b194447f4b11..7fbf50907a7f 100644 --- a/fs/netfs/write_collect.c +++ b/fs/netfs/write_collect.c @@ -228,8 +228,10 @@ reassess_streams: if (!smp_load_acquire(&stream->active)) continue; - front = list_first_entry_or_null(&stream->subrequests, - struct netfs_io_subrequest, rreq_link); + front = list_first_entry_or_null_acquire(&stream->subrequests, + struct netfs_io_subrequest, rreq_link); + /* Read first subreq pointer before IN_PROGRESS flag. */ + while (front) { trace_netfs_collect_sreq(wreq, front); //_debug("sreq [%x] %llx %zx/%zx", diff --git a/fs/netfs/write_issue.c b/fs/netfs/write_issue.c index 2db688f94125..b0e9690bb90c 100644 --- a/fs/netfs/write_issue.c +++ b/fs/netfs/write_issue.c @@ -204,7 +204,8 @@ void netfs_prepare_write(struct netfs_io_request *wreq, * remove entries off of the front. */ spin_lock(&wreq->lock); - list_add_tail(&subreq->rreq_link, &stream->subrequests); + /* Write IN_PROGRESS before pointer to new subreq */ + list_add_tail_release(&subreq->rreq_link, &stream->subrequests); if (list_is_first(&subreq->rreq_link, &stream->subrequests)) { if (!stream->active) { stream->collected_to = subreq->start; diff --git a/include/linux/list.h b/include/linux/list.h index 00ea8e5fb88b..09d979976b3b 100644 --- a/include/linux/list.h +++ b/include/linux/list.h @@ -191,6 +191,29 @@ static inline void list_add_tail(struct list_head *new, struct list_head *head) __list_add(new, head->prev, head); } +/** + * list_add_tail_release - add a new entry with release barrier + * @new: new entry to be added + * @head: list head to add it before + * + * Insert a new entry before the specified head, using a release barrier to set + * the ->next pointer that points to it. This is useful for implementing + * queues, in particular one that the elements will be walked through forwards + * locklessly. + */ +static inline void list_add_tail_release(struct list_head *new, + struct list_head *head) +{ + struct list_head *prev = head->prev; + + if (__list_add_valid(new, prev, head)) { + new->next = head; + new->prev = prev; + head->prev = new; + smp_store_release(&prev->next, new); + } +} + /* * Delete a list entry by making the prev/next entries * point to each other. @@ -644,6 +667,20 @@ static inline void list_splice_tail_init(struct list_head *list, pos__ != head__ ? list_entry(pos__, type, member) : NULL; \ }) +/** + * list_first_entry_or_null_acquire - get the first element from a list with barrier + * @ptr: the list head to take the element from. + * @type: the type of the struct this is embedded in. + * @member: the name of the list_head within the struct. + * + * Note that if the list is empty, it returns NULL. + */ +#define list_first_entry_or_null_acquire(ptr, type, member) ({ \ + struct list_head *head__ = (ptr); \ + struct list_head *pos__ = smp_load_acquire(&head__->next); \ + pos__ != head__ ? list_entry(pos__, type, member) : NULL; \ +}) + /** * list_last_entry_or_null - get the last element from a list * @ptr: the list head to take the element from. -- cgit v1.2.3 From 8a8c0cfdf4658fc5b295b7fc87be56e0d76741f4 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:41 +0100 Subject: netfs: Fix netfs_read_to_pagecache() to pause on subreq failure Fix netfs_read_to_pagecache() so that it pauses the generation of new subrequests if an already-issued subrequest fails. Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Closes: https://sashiko.dev/#/patchset/20260425125426.3855807-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-5-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_read.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index 15d73026ff64..fee0aebf5a3d 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -300,6 +300,11 @@ static void netfs_read_to_pagecache(struct netfs_io_request *rreq, } netfs_issue_read(rreq, subreq); + + if (test_bit(NETFS_RREQ_PAUSE, &rreq->flags)) + netfs_wait_for_paused_read(rreq); + if (test_bit(NETFS_RREQ_FAILED, &rreq->flags)) + break; cond_resched(); } while (size > 0); -- cgit v1.2.3 From 2c8f4742bb76117d735f92a3932d85239b16c494 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:42 +0100 Subject: netfs: Fix potential for tearing in ->remote_i_size and ->zero_point Fix potential tearing in using ->remote_i_size and ->zero_point by copying i_size_read() and i_size_write() and using the same seqcount as for i_size. We need to make sure that netfslib and the filesystems that use it always hold i_lock whilst updating any of the sizes to prevent i_size_seqcount from getting corrupted. Fixes: 4058f742105e ("netfs: Keep track of the actual remote file size") Fixes: 100ccd18bb41 ("netfs: Optimise away reads above the point at which there can be no data") Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-6-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/9p/v9fs_vfs.h | 13 -- fs/9p/vfs_inode.c | 6 +- fs/9p/vfs_inode_dotl.c | 12 +- fs/afs/file.c | 24 +++- fs/afs/inode.c | 31 +++-- fs/afs/internal.h | 11 +- fs/afs/write.c | 2 +- fs/netfs/buffered_read.c | 6 +- fs/netfs/buffered_write.c | 2 +- fs/netfs/direct_write.c | 6 +- fs/netfs/misc.c | 32 +++-- fs/netfs/write_collect.c | 9 +- fs/smb/client/cifsfs.c | 38 ++++-- fs/smb/client/cifssmb.c | 3 +- fs/smb/client/file.c | 13 +- fs/smb/client/inode.c | 14 ++- fs/smb/client/readdir.c | 3 +- fs/smb/client/smb2ops.c | 42 ++++--- fs/smb/client/smb2pdu.c | 3 +- include/linux/netfs.h | 293 ++++++++++++++++++++++++++++++++++++++++++++-- 20 files changed, 450 insertions(+), 113 deletions(-) diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h index d3aefbec4de6..34c115d7c250 100644 --- a/fs/9p/v9fs_vfs.h +++ b/fs/9p/v9fs_vfs.h @@ -75,17 +75,4 @@ static inline void v9fs_invalidate_inode_attr(struct inode *inode) int v9fs_open_to_dotl_flags(int flags); -static inline void v9fs_i_size_write(struct inode *inode, loff_t i_size) -{ - /* - * 32-bit need the lock, concurrent updates could break the - * sequences and make i_size_read() loop forever. - * 64-bit updates are atomic and can skip the locking. - */ - if (sizeof(i_size) > sizeof(long)) - spin_lock(&inode->i_lock); - i_size_write(inode, i_size); - if (sizeof(i_size) > sizeof(long)) - spin_unlock(&inode->i_lock); -} #endif diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index d1508b1fe109..f468acb8ee7d 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -1141,11 +1141,13 @@ v9fs_stat2inode(struct p9_wstat *stat, struct inode *inode, mode |= inode->i_mode & ~S_IALLUGO; inode->i_mode = mode; - v9inode->netfs.remote_i_size = stat->length; + spin_lock(&inode->i_lock); + netfs_write_remote_i_size(inode, stat->length); if (!(flags & V9FS_STAT2INODE_KEEP_ISIZE)) - v9fs_i_size_write(inode, stat->length); + i_size_write(inode, stat->length); /* not real number of blocks, but 512 byte ones ... */ inode->i_blocks = (stat->length + 512 - 1) >> 9; + spin_unlock(&inode->i_lock); v9inode->cache_validity &= ~V9FS_INO_INVALID_ATTR; } diff --git a/fs/9p/vfs_inode_dotl.c b/fs/9p/vfs_inode_dotl.c index 71796a89bcf4..141fb54db65d 100644 --- a/fs/9p/vfs_inode_dotl.c +++ b/fs/9p/vfs_inode_dotl.c @@ -634,10 +634,12 @@ v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode, mode |= inode->i_mode & ~S_IALLUGO; inode->i_mode = mode; - v9inode->netfs.remote_i_size = stat->st_size; + spin_lock(&inode->i_lock); + netfs_write_remote_i_size(inode, stat->st_size); if (!(flags & V9FS_STAT2INODE_KEEP_ISIZE)) - v9fs_i_size_write(inode, stat->st_size); + i_size_write(inode, stat->st_size); inode->i_blocks = stat->st_blocks; + spin_unlock(&inode->i_lock); } else { if (stat->st_result_mask & P9_STATS_ATIME) { inode_set_atime(inode, stat->st_atime_sec, @@ -662,13 +664,15 @@ v9fs_stat2inode_dotl(struct p9_stat_dotl *stat, struct inode *inode, mode |= inode->i_mode & ~S_IALLUGO; inode->i_mode = mode; } + spin_lock(&inode->i_lock); if (!(flags & V9FS_STAT2INODE_KEEP_ISIZE) && stat->st_result_mask & P9_STATS_SIZE) { - v9inode->netfs.remote_i_size = stat->st_size; - v9fs_i_size_write(inode, stat->st_size); + netfs_write_remote_i_size(inode, stat->st_size); + i_size_write(inode, stat->st_size); } if (stat->st_result_mask & P9_STATS_BLOCKS) inode->i_blocks = stat->st_blocks; + spin_unlock(&inode->i_lock); } if (stat->st_result_mask & P9_STATS_GEN) inode->i_generation = stat->st_gen; diff --git a/fs/afs/file.c b/fs/afs/file.c index 85696ac984cc..0467742bfeee 100644 --- a/fs/afs/file.c +++ b/fs/afs/file.c @@ -427,21 +427,35 @@ static void afs_free_request(struct netfs_io_request *rreq) afs_put_wb_key(rreq->netfs_priv2); } -static void afs_update_i_size(struct inode *inode, loff_t new_i_size) +/* + * Set the file size and block count, taking ->cb_lock and ->i_lock to maintain + * coherency and prevent 64-bit tearing on 32-bit arches. + * + * Also, estimate the number of 512 bytes blocks used, rounded up to nearest 1K + * for consistency with other AFS clients. + */ +void afs_set_i_size(struct afs_vnode *vnode, loff_t new_i_size) { - struct afs_vnode *vnode = AFS_FS_I(inode); + struct inode *inode = &vnode->netfs.inode; loff_t i_size; write_seqlock(&vnode->cb_lock); - i_size = i_size_read(&vnode->netfs.inode); + spin_lock(&inode->i_lock); + i_size = i_size_read(inode); if (new_i_size > i_size) { - i_size_write(&vnode->netfs.inode, new_i_size); - inode_set_bytes(&vnode->netfs.inode, new_i_size); + i_size_write(inode, new_i_size); + inode_set_bytes(inode, round_up(new_i_size, 1024)); } + spin_unlock(&inode->i_lock); write_sequnlock(&vnode->cb_lock); fscache_update_cookie(afs_vnode_cache(vnode), NULL, &new_i_size); } +static void afs_update_i_size(struct inode *inode, loff_t new_i_size) +{ + afs_set_i_size(AFS_FS_I(inode), new_i_size); +} + static void afs_netfs_invalidate_cache(struct netfs_io_request *wreq) { struct afs_vnode *vnode = AFS_FS_I(wreq->inode); diff --git a/fs/afs/inode.c b/fs/afs/inode.c index a5173434f786..19fe2e392885 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -224,7 +224,8 @@ static int afs_inode_init_from_status(struct afs_operation *op, return afs_protocol_error(NULL, afs_eproto_file_type); } - afs_set_i_size(vnode, status->size); + i_size_write(inode, status->size); + inode_set_bytes(inode, status->size); afs_set_netfs_context(vnode); vnode->invalid_before = status->data_version; @@ -253,7 +254,8 @@ static void afs_apply_status(struct afs_operation *op, { struct afs_file_status *status = &vp->scb.status; struct afs_vnode *vnode = vp->vnode; - struct inode *inode = &vnode->netfs.inode; + struct netfs_inode *ictx = &vnode->netfs; + struct inode *inode = &ictx->inode; struct timespec64 t; umode_t mode; bool unexpected_jump = false; @@ -336,6 +338,8 @@ static void afs_apply_status(struct afs_operation *op, } if (data_changed) { + unsigned long long zero_point, size = status->size; + inode_set_iversion_raw(inode, status->data_version); /* Only update the size if the data version jumped. If the @@ -343,16 +347,25 @@ static void afs_apply_status(struct afs_operation *op, * idea of what the size should be that's not the same as * what's on the server. */ - vnode->netfs.remote_i_size = status->size; - if (change_size || status->size > i_size_read(inode)) { - afs_set_i_size(vnode, status->size); + spin_lock(&inode->i_lock); + + if (change_size || size > i_size_read(inode)) { + /* We can read the sizes directly as we hold i_lock. */ + zero_point = ictx->_zero_point; + if (unexpected_jump) - vnode->netfs.zero_point = status->size; + zero_point = size; + netfs_write_sizes(inode, size, size, zero_point); + inode_set_bytes(inode, size); inode_set_ctime_to_ts(inode, t); inode_set_atime_to_ts(inode, t); + } else { + netfs_write_remote_i_size(inode, size); } + spin_unlock(&inode->i_lock); + if (op->ops == &afs_fetch_data_operation) - op->fetch.subreq->rreq->i_size = status->size; + op->fetch.subreq->rreq->i_size = size; } } @@ -709,7 +722,7 @@ int afs_getattr(struct mnt_idmap *idmap, const struct path *path, * it, but we need to give userspace the server's size. */ if (S_ISDIR(inode->i_mode)) - stat->size = vnode->netfs.remote_i_size; + stat->size = netfs_read_remote_i_size(inode); } while (read_seqretry(&vnode->cb_lock, seq)); return 0; @@ -889,7 +902,7 @@ int afs_setattr(struct mnt_idmap *idmap, struct dentry *dentry, */ if (!(attr->ia_valid & (supported & ~ATTR_SIZE & ~ATTR_MTIME)) && attr->ia_size < i_size && - attr->ia_size > vnode->netfs.remote_i_size) { + attr->ia_size > netfs_read_remote_i_size(inode)) { truncate_setsize(inode, attr->ia_size); netfs_resize_file(&vnode->netfs, size, false); fscache_resize_cookie(afs_vnode_cache(vnode), diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 599353c33337..816dc848ea71 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -1157,6 +1157,7 @@ extern int afs_open(struct inode *, struct file *); extern int afs_release(struct inode *, struct file *); void afs_fetch_data_async_rx(struct work_struct *work); void afs_fetch_data_immediate_cancel(struct afs_call *call); +void afs_set_i_size(struct afs_vnode *vnode, loff_t new_i_size); /* * flock.c @@ -1758,16 +1759,6 @@ static inline void afs_update_dentry_version(struct afs_operation *op, (void *)(unsigned long)dir_vp->scb.status.data_version; } -/* - * Set the file size and block count. Estimate the number of 512 bytes blocks - * used, rounded up to nearest 1K for consistency with other AFS clients. - */ -static inline void afs_set_i_size(struct afs_vnode *vnode, u64 size) -{ - i_size_write(&vnode->netfs.inode, size); - vnode->netfs.inode.i_blocks = ((size + 1023) >> 10) << 1; -} - /* * Check for a conflicting operation on a directory that we just unlinked from. * If someone managed to sneak a link or an unlink in on the file we just diff --git a/fs/afs/write.c b/fs/afs/write.c index fcfed9d24e0a..7f34b939706a 100644 --- a/fs/afs/write.c +++ b/fs/afs/write.c @@ -142,7 +142,7 @@ static void afs_issue_write_worker(struct work_struct *work) afs_begin_vnode_operation(op); op->store.write_iter = &subreq->io_iter; - op->store.i_size = umax(pos + len, vnode->netfs.remote_i_size); + op->store.i_size = umax(pos + len, netfs_read_remote_i_size(&vnode->netfs.inode)); op->mtime = inode_get_mtime(&vnode->netfs.inode); afs_wait_for_operation(op); diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index fee0aebf5a3d..ebd84a6cc3f0 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -209,7 +209,6 @@ static void netfs_issue_read(struct netfs_io_request *rreq, static void netfs_read_to_pagecache(struct netfs_io_request *rreq, struct readahead_control *ractl) { - struct netfs_inode *ictx = netfs_inode(rreq->inode); unsigned long long start = rreq->start; ssize_t size = rreq->len; int ret = 0; @@ -233,7 +232,8 @@ static void netfs_read_to_pagecache(struct netfs_io_request *rreq, source = netfs_cache_prepare_read(rreq, subreq, rreq->i_size); subreq->source = source; if (source == NETFS_DOWNLOAD_FROM_SERVER) { - unsigned long long zp = umin(ictx->zero_point, rreq->i_size); + unsigned long long zero_point = netfs_read_zero_point(rreq->inode); + unsigned long long zp = umin(zero_point, rreq->i_size); size_t len = subreq->len; if (unlikely(rreq->origin == NETFS_READ_SINGLE)) @@ -249,7 +249,7 @@ static void netfs_read_to_pagecache(struct netfs_io_request *rreq, pr_err("ZERO-LEN READ: R=%08x[%x] l=%zx/%zx s=%llx z=%llx i=%llx", rreq->debug_id, subreq->debug_index, subreq->len, size, - subreq->start, ictx->zero_point, rreq->i_size); + subreq->start, zero_point, rreq->i_size); netfs_cancel_read(subreq, ret); break; } diff --git a/fs/netfs/buffered_write.c b/fs/netfs/buffered_write.c index 05ea5b0cc0e8..b6ecd059dc4f 100644 --- a/fs/netfs/buffered_write.c +++ b/fs/netfs/buffered_write.c @@ -230,7 +230,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, * server would just return a block of zeros or a short read if * we try to read it. */ - if (fpos >= ctx->zero_point) { + if (fpos >= netfs_read_zero_point(inode)) { folio_zero_segment(folio, 0, offset); copied = copy_folio_from_iter_atomic(folio, offset, part, iter); if (unlikely(copied == 0)) diff --git a/fs/netfs/direct_write.c b/fs/netfs/direct_write.c index f9ab69de3e29..25f8ceb15fad 100644 --- a/fs/netfs/direct_write.c +++ b/fs/netfs/direct_write.c @@ -376,8 +376,10 @@ ssize_t netfs_unbuffered_write_iter(struct kiocb *iocb, struct iov_iter *from) if (ret < 0) goto out; end = iocb->ki_pos + iov_iter_count(from); - if (end > ictx->zero_point) - ictx->zero_point = end; + spin_lock(&inode->i_lock); + if (end > ictx->_zero_point) + netfs_write_zero_point(inode, end); + spin_unlock(&inode->i_lock); fscache_invalidate(netfs_i_cookie(ictx), NULL, i_size_read(inode), FSCACHE_INVAL_DIO_WRITE); diff --git a/fs/netfs/misc.c b/fs/netfs/misc.c index 21357907b7ee..bad661ff2bec 100644 --- a/fs/netfs/misc.c +++ b/fs/netfs/misc.c @@ -211,18 +211,25 @@ EXPORT_SYMBOL(netfs_clear_inode_writeback); void netfs_invalidate_folio(struct folio *folio, size_t offset, size_t length) { struct netfs_folio *finfo; - struct netfs_inode *ctx = netfs_inode(folio_inode(folio)); + struct inode *inode = folio_inode(folio); + struct netfs_inode *ctx = netfs_inode(inode); size_t flen = folio_size(folio); _enter("{%lx},%zx,%zx", folio->index, offset, length); if (offset == 0 && length == flen) { - unsigned long long i_size = i_size_read(&ctx->inode); + unsigned long long i_size, remote_i_size, zero_point; unsigned long long fpos = folio_pos(folio), end; + netfs_read_sizes(inode, &i_size, &remote_i_size, &zero_point); end = umin(fpos + flen, i_size); - if (fpos < i_size && end > ctx->zero_point) - ctx->zero_point = end; + if (fpos < i_size && end > zero_point) { + spin_lock(&inode->i_lock); + end = umin(fpos + flen, inode->i_size); + if (fpos < i_size && end > ctx->_zero_point) + netfs_write_zero_point(inode, end); + spin_unlock(&inode->i_lock); + } } folio_wait_private_2(folio); /* [DEPRECATED] */ @@ -292,15 +299,22 @@ EXPORT_SYMBOL(netfs_invalidate_folio); */ bool netfs_release_folio(struct folio *folio, gfp_t gfp) { - struct netfs_inode *ctx = netfs_inode(folio_inode(folio)); - unsigned long long end; + struct inode *inode = folio_inode(folio); + struct netfs_inode *ctx = netfs_inode(inode); + unsigned long long i_size, remote_i_size, zero_point, end; if (folio_test_dirty(folio)) return false; - end = umin(folio_next_pos(folio), i_size_read(&ctx->inode)); - if (end > ctx->zero_point) - ctx->zero_point = end; + netfs_read_sizes(inode, &i_size, &remote_i_size, &zero_point); + end = umin(folio_next_pos(folio), i_size); + if (end > zero_point) { + spin_lock(&inode->i_lock); + end = umin(folio_next_pos(folio), inode->i_size); + if (end > ctx->_zero_point) + netfs_write_zero_point(inode, end); + spin_unlock(&inode->i_lock); + } if (folio_test_private(folio)) return false; diff --git a/fs/netfs/write_collect.c b/fs/netfs/write_collect.c index 7fbf50907a7f..24fc2bb2f8a4 100644 --- a/fs/netfs/write_collect.c +++ b/fs/netfs/write_collect.c @@ -57,7 +57,8 @@ static void netfs_dump_request(const struct netfs_io_request *rreq) int netfs_folio_written_back(struct folio *folio) { enum netfs_folio_trace why = netfs_folio_trace_clear; - struct netfs_inode *ictx = netfs_inode(folio->mapping->host); + struct inode *inode = folio_inode(folio); + struct netfs_inode *ictx = netfs_inode(inode); struct netfs_folio *finfo; struct netfs_group *group = NULL; int gcount = 0; @@ -69,8 +70,10 @@ int netfs_folio_written_back(struct folio *folio) unsigned long long fend; fend = folio_pos(folio) + finfo->dirty_offset + finfo->dirty_len; - if (fend > ictx->zero_point) - ictx->zero_point = fend; + spin_lock(&ictx->inode.i_lock); + if (fend > ictx->_zero_point) + netfs_write_zero_point(inode, fend); + spin_unlock(&ictx->inode.i_lock); folio_detach_private(folio); group = finfo->netfs_group; diff --git a/fs/smb/client/cifsfs.c b/fs/smb/client/cifsfs.c index 9f76b0347fa9..feac491c5070 100644 --- a/fs/smb/client/cifsfs.c +++ b/fs/smb/client/cifsfs.c @@ -434,7 +434,8 @@ cifs_alloc_inode(struct super_block *sb) spin_lock_init(&cifs_inode->writers_lock); cifs_inode->writers = 0; cifs_inode->netfs.inode.i_blkbits = 14; /* 2**14 = CIFS_MAX_MSGSIZE */ - cifs_inode->netfs.remote_i_size = 0; + cifs_inode->netfs._remote_i_size = 0; + cifs_inode->netfs._zero_point = 0; cifs_inode->uniqueid = 0; cifs_inode->createtime = 0; cifs_inode->epoch = 0; @@ -1303,7 +1304,8 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, struct cifsFileInfo *smb_file_src = src_file->private_data; struct cifsFileInfo *smb_file_target = dst_file->private_data; struct cifs_tcon *target_tcon, *src_tcon; - unsigned long long destend, fstart, fend, old_size, new_size; + unsigned long long i_size, old_size, new_size, zero_point; + unsigned long long destend, fstart, fend; unsigned int xid; int rc; @@ -1347,7 +1349,7 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, * Advance the EOF marker after the flush above to the end of the range * if it's short of that. */ - if (src_cifsi->netfs.remote_i_size < off + len) { + if (netfs_read_remote_i_size(src_inode) < off + len) { rc = cifs_precopy_set_eof(src_inode, src_cifsi, src_tcon, xid, off + len); if (rc < 0) goto unlock; @@ -1368,16 +1370,18 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, rc = cifs_flush_folio(target_inode, destend, &fstart, &fend, false); if (rc) goto unlock; - if (fend > target_cifsi->netfs.zero_point) - target_cifsi->netfs.zero_point = fend + 1; - old_size = target_cifsi->netfs.remote_i_size; + + spin_lock(&target_inode->i_lock); + if (fend > zero_point) + netfs_write_zero_point(target_inode, fend + 1); + i_size = target_inode->i_size; + spin_unlock(&target_inode->i_lock); /* Discard all the folios that overlap the destination region. */ cifs_dbg(FYI, "about to discard pages %llx-%llx\n", fstart, fend); truncate_inode_pages_range(&target_inode->i_data, fstart, fend); - fscache_invalidate(cifs_inode_cookie(target_inode), NULL, - i_size_read(target_inode), 0); + fscache_invalidate(cifs_inode_cookie(target_inode), NULL, i_size, 0); rc = -EOPNOTSUPP; if (target_tcon->ses->server->ops->duplicate_extents) { @@ -1402,8 +1406,12 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, rc = -EINVAL; } } - if (rc == 0 && new_size > target_cifsi->netfs.zero_point) - target_cifsi->netfs.zero_point = new_size; + if (rc == 0) { + spin_lock(&target_inode->i_lock); + if (new_size > target_cifsi->netfs._zero_point) + netfs_write_zero_point(target_inode, new_size); + spin_unlock(&target_inode->i_lock); + } } /* force revalidate of size and timestamps of target file now @@ -1474,7 +1482,7 @@ ssize_t cifs_file_copychunk_range(unsigned int xid, * Advance the EOF marker after the flush above to the end of the range * if it's short of that. */ - if (src_cifsi->netfs.remote_i_size < off + len) { + if (netfs_read_remote_i_size(src_inode) < off + len) { rc = cifs_precopy_set_eof(src_inode, src_cifsi, src_tcon, xid, off + len); if (rc < 0) goto unlock; @@ -1502,8 +1510,12 @@ ssize_t cifs_file_copychunk_range(unsigned int xid, fscache_resize_cookie(cifs_inode_cookie(target_inode), i_size_read(target_inode)); } - if (rc > 0 && destoff + rc > target_cifsi->netfs.zero_point) - target_cifsi->netfs.zero_point = destoff + rc; + if (rc > 0) { + spin_lock(&target_inode->i_lock); + if (destoff + rc > target_cifsi->netfs._zero_point) + netfs_write_zero_point(target_inode, destoff + rc); + spin_unlock(&target_inode->i_lock); + } } file_accessed(src_file); diff --git a/fs/smb/client/cifssmb.c b/fs/smb/client/cifssmb.c index 3990a9012264..9e27bfa7376b 100644 --- a/fs/smb/client/cifssmb.c +++ b/fs/smb/client/cifssmb.c @@ -1465,6 +1465,7 @@ cifs_readv_callback(struct TCP_Server_Info *server, struct mid_q_entry *mid) struct cifs_io_subrequest *rdata = mid->callback_data; struct netfs_inode *ictx = netfs_inode(rdata->rreq->inode); struct cifs_tcon *tcon = tlink_tcon(rdata->req->cfile->tlink); + struct inode *inode = &ictx->inode; struct smb_rqst rqst = { .rq_iov = rdata->iov, .rq_nvec = 1, .rq_iter = rdata->subreq.io_iter }; @@ -1538,7 +1539,7 @@ do_retry: } else { size_t trans = rdata->subreq.transferred + rdata->got_bytes; if (trans < rdata->subreq.len && - rdata->subreq.start + trans >= ictx->remote_i_size) { + rdata->subreq.start + trans >= netfs_read_remote_i_size(inode)) { rdata->result = 0; __set_bit(NETFS_SREQ_HIT_EOF, &rdata->subreq.flags); } else if (rdata->got_bytes > 0) { diff --git a/fs/smb/client/file.c b/fs/smb/client/file.c index 664a2c223089..b60344125f27 100644 --- a/fs/smb/client/file.c +++ b/fs/smb/client/file.c @@ -2517,18 +2517,23 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *flock) void cifs_write_subrequest_terminated(struct cifs_io_subrequest *wdata, ssize_t result) { struct netfs_io_request *wreq = wdata->rreq; - struct netfs_inode *ictx = netfs_inode(wreq->inode); + struct inode *inode = wreq->inode; + struct netfs_inode *ictx = netfs_inode(inode); loff_t wrend; if (result > 0) { + spin_lock(&inode->i_lock); + wrend = wdata->subreq.start + wdata->subreq.transferred + result; - if (wrend > ictx->zero_point && + if (wrend > ictx->_zero_point && (wdata->rreq->origin == NETFS_UNBUFFERED_WRITE || wdata->rreq->origin == NETFS_DIO_WRITE)) - ictx->zero_point = wrend; - if (wrend > ictx->remote_i_size) + netfs_write_zero_point(inode, wrend); + if (wrend > ictx->_remote_i_size) netfs_resize_file(ictx, wrend, true); + + spin_unlock(&inode->i_lock); } netfs_write_subrequest_terminated(&wdata->subreq, result); diff --git a/fs/smb/client/inode.c b/fs/smb/client/inode.c index 16a5310155d5..9472c0a6c187 100644 --- a/fs/smb/client/inode.c +++ b/fs/smb/client/inode.c @@ -119,7 +119,7 @@ cifs_revalidate_cache(struct inode *inode, struct cifs_fattr *fattr) fattr->cf_mtime = timestamp_truncate(fattr->cf_mtime, inode); mtime = inode_get_mtime(inode); if (timespec64_equal(&mtime, &fattr->cf_mtime) && - cifs_i->netfs.remote_i_size == fattr->cf_eof) { + netfs_read_remote_i_size(inode) == fattr->cf_eof) { cifs_dbg(FYI, "%s: inode %llu is unchanged\n", __func__, cifs_i->uniqueid); return; @@ -173,12 +173,12 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr, CIFS_I(inode)->time = 0; /* force reval */ return -ESTALE; } - if (inode_state_read_once(inode) & I_NEW) - CIFS_I(inode)->netfs.zero_point = fattr->cf_eof; - cifs_revalidate_cache(inode, fattr); spin_lock(&inode->i_lock); + if (inode_state_read_once(inode) & I_NEW) + netfs_write_zero_point(inode, fattr->cf_eof); + fattr->cf_mtime = timestamp_truncate(fattr->cf_mtime, inode); fattr->cf_atime = timestamp_truncate(fattr->cf_atime, inode); fattr->cf_ctime = timestamp_truncate(fattr->cf_ctime, inode); @@ -212,7 +212,7 @@ cifs_fattr_to_inode(struct inode *inode, struct cifs_fattr *fattr, else clear_bit(CIFS_INO_DELETE_PENDING, &cifs_i->flags); - cifs_i->netfs.remote_i_size = fattr->cf_eof; + netfs_write_remote_i_size(inode, fattr->cf_eof); /* * Can't safely change the file size here if the client is writing to * it due to potential races. @@ -2772,7 +2772,9 @@ cifs_revalidate_mapping(struct inode *inode) if (cifs_sb_flags(cifs_sb) & CIFS_MOUNT_RW_CACHE) goto skip_invalidate; - cifs_inode->netfs.zero_point = cifs_inode->netfs.remote_i_size; + spin_lock(&inode->i_lock); + netfs_write_zero_point(inode, netfs_inode(inode)->_remote_i_size); + spin_unlock(&inode->i_lock); rc = filemap_invalidate_inode(inode, true, 0, LLONG_MAX); if (rc) { cifs_dbg(VFS, "%s: invalidate inode %p failed with rc %d\n", diff --git a/fs/smb/client/readdir.c b/fs/smb/client/readdir.c index be22bbc4a65a..e860fa08b5e3 100644 --- a/fs/smb/client/readdir.c +++ b/fs/smb/client/readdir.c @@ -143,7 +143,8 @@ retry: fattr->cf_rdev = inode->i_rdev; fattr->cf_uid = inode->i_uid; fattr->cf_gid = inode->i_gid; - fattr->cf_eof = CIFS_I(inode)->netfs.remote_i_size; + fattr->cf_eof = + netfs_read_remote_i_size(inode); fattr->cf_symlink_target = NULL; } else { CIFS_I(inode)->time = 0; diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index e6cb9b144530..0ea3ce1b94ea 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -3402,8 +3402,7 @@ static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon, struct inode *inode = file_inode(file); struct cifsInodeInfo *cifsi = CIFS_I(inode); struct cifsFileInfo *cfile = file->private_data; - struct netfs_inode *ictx = netfs_inode(inode); - unsigned long long i_size, new_size, remote_size; + unsigned long long i_size, new_size, remote_i_size, zero_point; long rc; unsigned int xid; @@ -3414,9 +3413,8 @@ static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon, filemap_invalidate_lock(inode->i_mapping); - i_size = i_size_read(inode); - remote_size = ictx->remote_i_size; - if (offset + len >= remote_size && offset < i_size) { + netfs_read_sizes(inode, &i_size, &remote_i_size, &zero_point); + if (offset + len >= remote_i_size && offset < i_size) { unsigned long long top = umin(offset + len, i_size); rc = filemap_write_and_wait_range(inode->i_mapping, offset, top - 1); @@ -3449,9 +3447,11 @@ static long smb3_zero_range(struct file *file, struct cifs_tcon *tcon, cfile->fid.volatile_fid, cfile->pid, new_size); if (rc >= 0) { truncate_setsize(inode, new_size); + spin_lock(&inode->i_lock); netfs_resize_file(&cifsi->netfs, new_size, true); - if (offset < cifsi->netfs.zero_point) - cifsi->netfs.zero_point = offset; + if (offset < cifsi->netfs._zero_point) + netfs_write_zero_point(inode, offset); + spin_unlock(&inode->i_lock); fscache_resize_cookie(cifs_inode_cookie(inode), new_size); } } @@ -3474,7 +3474,7 @@ static long smb3_punch_hole(struct file *file, struct cifs_tcon *tcon, struct inode *inode = file_inode(file); struct cifsFileInfo *cfile = file->private_data; struct file_zero_data_information fsctl_buf; - unsigned long long end = offset + len, i_size, remote_i_size; + unsigned long long end = offset + len, i_size, remote_i_size, zero_point; long rc; unsigned int xid; __u8 set_sparse = 1; @@ -3516,14 +3516,17 @@ static long smb3_punch_hole(struct file *file, struct cifs_tcon *tcon, * that we locally hole-punch the tail of the dirty data, the proposed * EOF update will end up in the wrong place. */ - i_size = i_size_read(inode); - remote_i_size = netfs_inode(inode)->remote_i_size; + netfs_read_sizes(inode, &i_size, &remote_i_size, &zero_point); + if (end > remote_i_size && i_size > remote_i_size) { unsigned long long extend_to = umin(end, i_size); rc = SMB2_set_eof(xid, tcon, cfile->fid.persistent_fid, cfile->fid.volatile_fid, cfile->pid, extend_to); - if (rc >= 0) - netfs_inode(inode)->remote_i_size = extend_to; + if (rc >= 0) { + spin_lock(&inode->i_lock); + netfs_write_remote_i_size(inode, extend_to); + spin_unlock(&inode->i_lock); + } } unlock: @@ -3787,7 +3790,6 @@ static long smb3_collapse_range(struct file *file, struct cifs_tcon *tcon, struct inode *inode = file_inode(file); struct cifsInodeInfo *cifsi = CIFS_I(inode); struct cifsFileInfo *cfile = file->private_data; - struct netfs_inode *ictx = &cifsi->netfs; loff_t old_eof, new_eof; xid = get_xid(); @@ -3805,7 +3807,9 @@ static long smb3_collapse_range(struct file *file, struct cifs_tcon *tcon, goto out_2; truncate_pagecache_range(inode, off, old_eof); - ictx->zero_point = old_eof; + spin_lock(&inode->i_lock); + netfs_write_zero_point(inode, old_eof); + spin_unlock(&inode->i_lock); netfs_wait_for_outstanding_io(inode); rc = smb2_copychunk_range(xid, cfile, cfile, off + len, @@ -3822,8 +3826,10 @@ static long smb3_collapse_range(struct file *file, struct cifs_tcon *tcon, rc = 0; truncate_setsize(inode, new_eof); + spin_lock(&inode->i_lock); netfs_resize_file(&cifsi->netfs, new_eof, true); - ictx->zero_point = new_eof; + netfs_write_zero_point(inode, new_eof); + spin_unlock(&inode->i_lock); fscache_resize_cookie(cifs_inode_cookie(inode), new_eof); out_2: filemap_invalidate_unlock(inode->i_mapping); @@ -3866,13 +3872,17 @@ static long smb3_insert_range(struct file *file, struct cifs_tcon *tcon, goto out_2; truncate_setsize(inode, new_eof); + spin_lock(&inode->i_lock); netfs_resize_file(&cifsi->netfs, i_size_read(inode), true); + spin_unlock(&inode->i_lock); fscache_resize_cookie(cifs_inode_cookie(inode), i_size_read(inode)); rc = smb2_copychunk_range(xid, cfile, cfile, off, count, off + len); if (rc < 0) goto out_2; - cifsi->netfs.zero_point = new_eof; + spin_lock(&inode->i_lock); + netfs_write_zero_point(inode, new_eof); + spin_unlock(&inode->i_lock); rc = smb3_zero_data(file, tcon, off, len, xid); if (rc < 0) diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c index 995fcdd30681..3bd300347f16 100644 --- a/fs/smb/client/smb2pdu.c +++ b/fs/smb/client/smb2pdu.c @@ -4608,6 +4608,7 @@ smb2_readv_callback(struct TCP_Server_Info *server, struct mid_q_entry *mid) struct netfs_inode *ictx = netfs_inode(rdata->rreq->inode); struct cifs_tcon *tcon = tlink_tcon(rdata->req->cfile->tlink); struct smb2_hdr *shdr = (struct smb2_hdr *)rdata->iov[0].iov_base; + struct inode *inode = &ictx->inode; struct cifs_credits credits = { .value = 0, .instance = 0, @@ -4721,7 +4722,7 @@ do_retry: } else { size_t trans = rdata->subreq.transferred + rdata->got_bytes; if (trans < rdata->subreq.len && - rdata->subreq.start + trans >= ictx->remote_i_size) { + rdata->subreq.start + trans >= netfs_read_remote_i_size(inode)) { __set_bit(NETFS_SREQ_HIT_EOF, &rdata->subreq.flags); rdata->result = 0; } diff --git a/include/linux/netfs.h b/include/linux/netfs.h index ba17ac5bf356..4fd1d796ad73 100644 --- a/include/linux/netfs.h +++ b/include/linux/netfs.h @@ -62,8 +62,8 @@ struct netfs_inode { struct fscache_cookie *cache; #endif struct mutex wb_lock; /* Writeback serialisation */ - loff_t remote_i_size; /* Size of the remote file */ - loff_t zero_point; /* Size after which we assume there's no data + loff_t _remote_i_size; /* Size of the remote file */ + loff_t _zero_point; /* Size after which we assume there's no data * on the server */ atomic_t io_count; /* Number of outstanding reqs */ unsigned long flags; @@ -474,6 +474,254 @@ static inline struct netfs_inode *netfs_inode(struct inode *inode) return container_of(inode, struct netfs_inode, inode); } +/** + * netfs_read_remote_i_size - Read remote_i_size safely + * @inode: The inode to access + * + * Read remote_i_size safely without the potential for tearing on 32-bit + * arches. + * + * NOTE: in a 32bit arch with a preemptable kernel and an UP compile the + * i_size_read/write must be atomic with respect to the local cpu (unlike with + * preempt disabled), but they don't need to be atomic with respect to other + * cpus like in true SMP (so they need either to either locally disable irq + * around the read or for example on x86 they can be still implemented as a + * cmpxchg8b without the need of the lock prefix). For SMP compiles and 64bit + * archs it makes no difference if preempt is enabled or not. + */ +static inline unsigned long long netfs_read_remote_i_size(const struct inode *inode) +{ + const struct netfs_inode *ictx = container_of(inode, struct netfs_inode, inode); + unsigned long long remote_i_size; + +#if BITS_PER_LONG==32 && defined(CONFIG_SMP) + unsigned int seq; + + do { + seq = read_seqcount_begin(&inode->i_size_seqcount); + remote_i_size = ictx->_remote_i_size; + } while (read_seqcount_retry(&inode->i_size_seqcount, seq)); +#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPTION) + preempt_disable(); + remote_i_size = ictx->_remote_i_size; + preempt_enable(); +#else + /* Pairs with smp_store_release() in netfs_write_remote_i_size() */ + remote_i_size = smp_load_acquire(&ictx->_remote_i_size); +#endif + return remote_i_size; +} + +/* + * netfs_write_remote_i_size - Set remote_i_size safely + * @inode: The inode to access + * @remote_i_size: The new value for the size of the file on the server + * + * Set remote_i_size safely without the potential for tearing on 32-bit arches. + * + * Context: The caller must hold inode->i_lock. + * + * NOTE: unlike netfs_read_remote_i_size(), netfs_write_remote_i_size() does + * need locking around it (normally i_rwsem), otherwise on 32bit/SMP an update + * of i_size_seqcount can be lost, resulting in subsequent i_size_read() calls + * spinning forever. + */ +static inline void netfs_write_remote_i_size(struct inode *inode, + unsigned long long remote_i_size) +{ + struct netfs_inode *ictx = netfs_inode(inode); + +#if BITS_PER_LONG==32 && defined(CONFIG_SMP) + write_seqcount_begin(&inode->i_size_seqcount); + ictx->_remote_i_size = remote_i_size; + write_seqcount_end(&inode->i_size_seqcount); +#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPTION) + preempt_disable(); + ictx->_remote_i_size = remote_i_size; + preempt_enable(); +#else + /* + * Pairs with smp_load_acquire() in netfs_read_remote_i_size() to + * ensure changes related to inode size (such as page contents) are + * visible before we see the changed inode size. + */ + smp_store_release(&ictx->_remote_i_size, remote_i_size); +#endif +} + +/** + * netfs_read_zero_point - Read zero_point safely + * @inode: The inode to access + * + * Read zero_point safely without the potential for tearing on 32-bit + * arches. + * + * NOTE: in a 32bit arch with a preemptable kernel and an UP compile the + * i_size_read/write must be atomic with respect to the local cpu (unlike with + * preempt disabled), but they don't need to be atomic with respect to other + * cpus like in true SMP (so they need either to either locally disable irq + * around the read or for example on x86 they can be still implemented as a + * cmpxchg8b without the need of the lock prefix). For SMP compiles and 64bit + * archs it makes no difference if preempt is enabled or not. + */ +static inline unsigned long long netfs_read_zero_point(const struct inode *inode) +{ + struct netfs_inode *ictx = container_of(inode, struct netfs_inode, inode); + unsigned long long zero_point; + +#if BITS_PER_LONG==32 && defined(CONFIG_SMP) + unsigned int seq; + + do { + seq = read_seqcount_begin(&inode->i_size_seqcount); + zero_point = ictx->_zero_point; + } while (read_seqcount_retry(&inode->i_size_seqcount, seq)); +#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPTION) + preempt_disable(); + zero_point = ictx->_zero_point; + preempt_enable(); +#else + /* Pairs with smp_store_release() in netfs_write_zero_point() */ + zero_point = smp_load_acquire(&ictx->_zero_point); +#endif + return zero_point; +} + +/* + * netfs_write_zero_point - Set zero_point safely + * @inode: The inode to access + * @zero_point: The new value for the point beyond which the server has no data + * + * Set zero_point safely without the potential for tearing on 32-bit arches. + * + * Context: The caller must hold inode->i_lock. + * + * NOTE: unlike netfs_read_zero_point(), netfs_write_zero_point() does need + * locking around it (normally i_rwsem), otherwise on 32bit/SMP an update of + * i_size_seqcount can be lost, resulting in subsequent read calls spinning + * forever. + */ +static inline void netfs_write_zero_point(struct inode *inode, + unsigned long long zero_point) +{ + struct netfs_inode *ictx = netfs_inode(inode); + +#if BITS_PER_LONG==32 && defined(CONFIG_SMP) + write_seqcount_begin(&inode->i_size_seqcount); + ictx->_zero_point = zero_point; + write_seqcount_end(&inode->i_size_seqcount); +#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPTION) + preempt_disable(); + ictx->_zero_point = zero_point; + preempt_enable(); +#else + /* + * Pairs with smp_load_acquire() in netfs_read_zero_point() to + * ensure changes related to inode size (such as page contents) are + * visible before we see the changed inode size. + */ + smp_store_release(&ictx->_zero_point, zero_point); +#endif +} + +/** + * netfs_read_sizes - Read remote_i_size and zero_point safely + * @inode: The inode to access + * @i_size: Where to return the local file size. + * @remote_i_size: Where to return the size of the file on the server + * @zero_point: Where to return the the point beyond which the server has no data + * + * Read remote_i_size and zero_point safely without the potential for tearing + * on 32-bit arches. + * + * NOTE: in a 32bit arch with a preemptable kernel and an UP compile the + * i_size_read/write must be atomic with respect to the local cpu (unlike with + * preempt disabled), but they don't need to be atomic with respect to other + * cpus like in true SMP (so they need either to either locally disable irq + * around the read or for example on x86 they can be still implemented as a + * cmpxchg8b without the need of the lock prefix). For SMP compiles and 64bit + * archs it makes no difference if preempt is enabled or not. + */ +static inline void netfs_read_sizes(const struct inode *inode, + unsigned long long *i_size, + unsigned long long *remote_i_size, + unsigned long long *zero_point) +{ + const struct netfs_inode *ictx = container_of(inode, struct netfs_inode, inode); +#if BITS_PER_LONG==32 && defined(CONFIG_SMP) + unsigned int seq; + + do { + seq = read_seqcount_begin(&inode->i_size_seqcount); + *i_size = inode->i_size; + *remote_i_size = ictx->_remote_i_size; + *zero_point = ictx->_zero_point; + } while (read_seqcount_retry(&inode->i_size_seqcount, seq)); +#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPTION) + preempt_disable(); + *i_size = inode->i_size; + *remote_i_size = ictx->_remote_i_size; + *zero_point = ictx->_zero_point; + preempt_enable(); +#else + /* Pairs with smp_store_release() in i_size_write() */ + *i_size = smp_load_acquire(&inode->i_size); + /* Pairs with smp_store_release() in netfs_write_remote_i_size() */ + *remote_i_size = smp_load_acquire(&ictx->_remote_i_size); + /* Pairs with smp_store_release() in netfs_write_zero_point() */ + *zero_point = smp_load_acquire(&ictx->_zero_point); +#endif +} + +/* + * netfs_write_sizes - Set i_size, remote_i_size and zero_point safely + * @inode: The inode to access + * @i_size: The new value for the local size of the file + * @remote_i_size: The new value for the size of the file on the server + * @zero_point: The new value for the point beyond which the server has no data + * + * Set both remote_i_size and zero_point safely without the potential for + * tearing on 32-bit arches. + * + * Context: The caller must hold inode->i_lock. + * + * NOTE: unlike netfs_read_zero_point(), netfs_write_zero_point() does need + * locking around it (normally i_rwsem), otherwise on 32bit/SMP an update of + * i_size_seqcount can be lost, resulting in subsequent read calls spinning + * forever. + */ +static inline void netfs_write_sizes(struct inode *inode, + unsigned long long i_size, + unsigned long long remote_i_size, + unsigned long long zero_point) +{ + struct netfs_inode *ictx = netfs_inode(inode); + +#if BITS_PER_LONG==32 && defined(CONFIG_SMP) + write_seqcount_begin(&inode->i_size_seqcount); + inode->i_size = i_size; + ictx->_remote_i_size = remote_i_size; + ictx->_zero_point = zero_point; + write_seqcount_end(&inode->i_size_seqcount); +#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPTION) + preempt_disable(); + inode->i_size = i_size; + ictx->_remote_i_size = remote_i_size; + ictx->_zero_point = zero_point; + preempt_enable(); +#else + /* + * Pairs with smp_load_acquire() in i_size_read(), + * netfs_read_remote_i_size() and netfs_read_zero_point() to ensure + * changes related to inode size (such as page contents) are visible + * before we see the changed inode size. + */ + smp_store_release(&inode->i_size, i_size); + smp_store_release(&ictx->_remote_i_size, remote_i_size); + smp_store_release(&ictx->_zero_point, zero_point); +#endif +} + /** * netfs_inode_init - Initialise a netfslib inode context * @ctx: The netfs inode to initialise @@ -488,8 +736,8 @@ static inline void netfs_inode_init(struct netfs_inode *ctx, bool use_zero_point) { ctx->ops = ops; - ctx->remote_i_size = i_size_read(&ctx->inode); - ctx->zero_point = LLONG_MAX; + ctx->_remote_i_size = i_size_read(&ctx->inode); + ctx->_zero_point = LLONG_MAX; ctx->flags = 0; atomic_set(&ctx->io_count, 0); #if IS_ENABLED(CONFIG_FSCACHE) @@ -498,7 +746,7 @@ static inline void netfs_inode_init(struct netfs_inode *ctx, mutex_init(&ctx->wb_lock); /* ->releasepage() drives zero_point */ if (use_zero_point) { - ctx->zero_point = ctx->remote_i_size; + ctx->_zero_point = ctx->_remote_i_size; mapping_set_release_always(ctx->inode.i_mapping); } } @@ -511,13 +759,40 @@ static inline void netfs_inode_init(struct netfs_inode *ctx, * * Inform the netfs lib that a file got resized so that it can adjust its state. */ -static inline void netfs_resize_file(struct netfs_inode *ctx, loff_t new_i_size, +static inline void netfs_resize_file(struct netfs_inode *ictx, + unsigned long long new_i_size, bool changed_on_server) { +#if BITS_PER_LONG==32 && defined(CONFIG_SMP) + struct inode *inode = &ictx->inode; + + preempt_disable(); + write_seqcount_begin(&inode->i_size_seqcount); + if (changed_on_server) + ictx->_remote_i_size = new_i_size; + if (new_i_size < ictx->_zero_point) + ictx->_zero_point = new_i_size; + write_seqcount_end(&inode->i_size_seqcount); + preempt_enable(); +#elif BITS_PER_LONG==32 && defined(CONFIG_PREEMPTION) + preempt_disable(); if (changed_on_server) - ctx->remote_i_size = new_i_size; - if (new_i_size < ctx->zero_point) - ctx->zero_point = new_i_size; + ictx->_remote_i_size = new_i_size; + if (new_i_size < ictx->_zero_point) + ictx->_zero_point = new_i_size; + preempt_enable(); +#else + /* + * Pairs with smp_load_acquire() in netfs_read_remote_i_size and + * netfs_read_zero_point() to ensure changes related to inode size + * (such as page contents) are visible before we see the changed inode + * size. + */ + if (changed_on_server) + smp_store_release(&ictx->_remote_i_size, new_i_size); + if (new_i_size < ictx->_zero_point) + smp_store_release(&ictx->_zero_point, new_i_size); +#endif } /** -- cgit v1.2.3 From 4543a4d737944134a1394afe797622546fbcc98a Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:43 +0100 Subject: netfs: Fix zeropoint update where i_size > remote_i_size Fix the update of the zero point[*] by netfs_release_folio() when there is uncommitted data in the pagecache beyond the folio being released but the on-server EOF is in this folio (ie. i_size > remote_i_size). The update needs to limit zero_point to remote_i_size, not i_size as i_size is a local phenomenon reflecting updates made locally to the pagecache, not stuff written to the server. remote_i_size tracks the server's i_size. [*] The zero point is the file position from which we can assume that the server will just return zeros, so we can avoid generating reads. Note that netfs_invalidate_folio() probably doesn't need fixing as zero_point should be updated by setattr after truncation or fallocate. Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0x1bbae 0x82864 write 0x3ef2e 0xf9c8 0x1bbae write 0x67e05 0xcb5a 0x4e8f6 mapread 0x57781 0x85b6 0x7495f copy_range 0x5d3d 0x10329 0x54fac 0x7495f write 0x64710 0x1c2b 0x7495f mapread 0x64000 0x1000 0x7495f on cifs with the default cache option. It shows read-gaps on folio 0x64 failing with a short read (ie. it hits EOF) if the FMODE_READ check is commented out in netfs_perform_write(): if (//(file->f_mode & FMODE_READ) || netfs_is_cache_enabled(ctx)) { and no fscache. This was initially found with the generic/522 xfstest. Fixes: cce6bfa6ca0e ("netfs: Fix trimming of streaming-write folios in netfs_inval_folio()") Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-7-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/misc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/netfs/misc.c b/fs/netfs/misc.c index bad661ff2bec..723571ca1b88 100644 --- a/fs/netfs/misc.c +++ b/fs/netfs/misc.c @@ -307,10 +307,10 @@ bool netfs_release_folio(struct folio *folio, gfp_t gfp) return false; netfs_read_sizes(inode, &i_size, &remote_i_size, &zero_point); - end = umin(folio_next_pos(folio), i_size); + end = folio_next_pos(folio); if (end > zero_point) { spin_lock(&inode->i_lock); - end = umin(folio_next_pos(folio), inode->i_size); + end = umin(end, ctx->_remote_i_size); if (end > ctx->_zero_point) netfs_write_zero_point(inode, end); spin_unlock(&inode->i_lock); -- cgit v1.2.3 From dc7832d05deb4d632e8035e3299e31a3528fa0d0 Mon Sep 17 00:00:00 2001 From: Viacheslav Dubeyko Date: Tue, 12 May 2026 13:33:44 +0100 Subject: netfs: fix VM_BUG_ON_FOLIO() issue in netfs_write_begin() call The multiple runs of generic/013 test-case is capable to reproduce a kernel BUG at mm/filemap.c:1504 with probability of 30%. while true; do sudo ./check generic/013 done [ 9849.452376] page: refcount:3 mapcount:0 mapping:00000000e58ff252 index:0x10781 pfn:0x1c322 [ 9849.452412] memcg:ffff8881a1915800 [ 9849.452417] aops:ceph_aops ino:1000058db9e dentry name(?):"f9XXXXXX" [ 9849.452432] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 9849.452441] raw: 0017ffffc0000000 0000000000000000 dead000000000122 ffff88816110d248 [ 9849.452445] raw: 0000000000010781 0000000000000000 00000003ffffffff ffff8881a1915800 [ 9849.452447] page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio)) [ 9849.452474] ------------[ cut here ]------------ [ 9849.452476] kernel BUG at mm/filemap.c:1504! [ 9849.478635] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 9849.481772] CPU: 2 UID: 0 PID: 84223 Comm: fsstress Not tainted 7.0.0-rc1+ #18 PREEMPT(full) [ 9849.482881] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-9.fc43 06/1 0/2025 [ 9849.484539] RIP: 0010:folio_unlock+0x85/0xa0 [ 9849.485076] Code: 89 df 31 f6 e8 1c f3 ff ff 48 8b 5d f8 c9 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 48 c7 c6 80 6c d9 a7 48 89 df e8 4b b3 10 00 <0f> 0b 48 89 df e8 21 e6 2c 00 eb 9d 0f 1f 40 00 66 66 2e 0f 1f 84 [ 9849.493818] RSP: 0018:ffff8881bb8076b0 EFLAGS: 00010246 [ 9849.495740] RAX: 0000000000000000 RBX: ffffea00070c8980 RCX: 0000000000000000 [ 9849.498678] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 9849.500559] RBP: ffff8881bb8076b8 R08: 0000000000000000 R09: 0000000000000000 [ 9849.501097] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000010782000 [ 9849.502108] R13: ffff8881935de738 R14: ffff88816110d010 R15: 0000000000001000 [ 9849.502516] FS: 00007e36cbe94740(0000) GS:ffff88824a899000(0000) knlGS:0000000000000000 [ 9849.502996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9849.503810] CR2: 000000c0002b0000 CR3: 000000011bbf6004 CR4: 0000000000772ef0 [ 9849.504459] PKRU: 55555554 [ 9849.504626] Call Trace: [ 9849.505242] [ 9849.505379] netfs_write_begin+0x7c8/0x10a0 [ 9849.505877] ? __kasan_check_read+0x11/0x20 [ 9849.506384] ? __pfx_netfs_write_begin+0x10/0x10 [ 9849.507178] ceph_write_begin+0x8c/0x1c0 [ 9849.507934] generic_perform_write+0x391/0x8f0 [ 9849.508503] ? __pfx_generic_perform_write+0x10/0x10 [ 9849.509062] ? file_update_time_flags+0x19a/0x4b0 [ 9849.509581] ? ceph_get_caps+0x63/0xf0 [ 9849.510259] ? ceph_get_caps+0x63/0xf0 [ 9849.510530] ceph_write_iter+0xe79/0x1ae0 [ 9849.511282] ? __pfx_ceph_write_iter+0x10/0x10 [ 9849.511839] ? lock_acquire+0x1ad/0x310 [ 9849.512334] ? ksys_write+0xf9/0x230 [ 9849.512582] ? lock_is_held_type+0xaa/0x140 [ 9849.513128] vfs_write+0x512/0x1110 [ 9849.513634] ? __fget_files+0x33/0x350 [ 9849.513893] ? __pfx_vfs_write+0x10/0x10 [ 9849.514143] ? mutex_lock_nested+0x1b/0x30 [ 9849.514394] ksys_write+0xf9/0x230 [ 9849.514621] ? __pfx_ksys_write+0x10/0x10 [ 9849.514887] ? do_syscall_64+0x25e/0x1520 [ 9849.515122] ? __kasan_check_read+0x11/0x20 [ 9849.515366] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.515655] __x64_sys_write+0x72/0xd0 [ 9849.515885] ? trace_hardirqs_on+0x24/0x1c0 [ 9849.516130] x64_sys_call+0x22f/0x2390 [ 9849.516341] do_syscall_64+0x12b/0x1520 [ 9849.516545] ? do_syscall_64+0x27c/0x1520 [ 9849.516783] ? do_syscall_64+0x27c/0x1520 [ 9849.517003] ? lock_release+0x318/0x480 [ 9849.517220] ? __x64_sys_io_getevents+0x143/0x2d0 [ 9849.517479] ? percpu_ref_put_many.constprop.0+0x8f/0x210 [ 9849.517779] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 9849.518073] ? do_syscall_64+0x25e/0x1520 [ 9849.518291] ? __kasan_check_read+0x11/0x20 [ 9849.518519] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.518799] ? do_syscall_64+0x27c/0x1520 [ 9849.519024] ? local_clock_noinstr+0xf/0x120 [ 9849.519262] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 9849.519544] ? do_syscall_64+0x25e/0x1520 [ 9849.519781] ? __kasan_check_read+0x11/0x20 [ 9849.520008] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.520273] ? do_syscall_64+0x27c/0x1520 [ 9849.520491] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.520767] ? irqentry_exit+0x10c/0x6c0 [ 9849.520984] ? trace_hardirqs_off+0x86/0x1b0 [ 9849.521224] ? exc_page_fault+0xab/0x130 [ 9849.521472] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 9849.521766] RIP: 0033:0x7e36cbd14907 [ 9849.521989] Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 9849.523057] RSP: 002b:00007ffff2d2a968 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 9849.523484] RAX: ffffffffffffffda RBX: 000000000000e549 RCX: 00007e36cbd14907 [ 9849.523885] RDX: 000000000000e549 RSI: 00005bd797ec6370 RDI: 0000000000000004 [ 9849.524277] RBP: 0000000000000004 R08: 0000000000000047 R09: 00005bd797ec6370 [ 9849.524652] R10: 0000000000000078 R11: 0000000000000246 R12: 0000000000000049 [ 9849.525062] R13: 0000000010781a37 R14: 00005bd797ec6370 R15: 0000000000000000 [ 9849.525447] [ 9849.525574] Modules linked in: intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core pmt_telemetry pmt_discovery pmt_class intel_pmc_ssram_telemetry intel_vsec kvm_intel joydev kvm irqbypass ghash_clmulni_intel aesni_intel input_leds rapl mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 bochs qemu_fw_cfg i2c_smbus pata_acpi sch_fq_codel rbd msr parport_pc ppdev lp parport efi_pstore [ 9849.529150] ---[ end trace 0000000000000000 ]--- [ 9849.529502] RIP: 0010:folio_unlock+0x85/0xa0 [ 9849.530813] Code: 89 df 31 f6 e8 1c f3 ff ff 48 8b 5d f8 c9 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 48 c7 c6 80 6c d9 a7 48 89 df e8 4b b3 10 00 <0f> 0b 48 89 df e8 21 e6 2c 00 eb 9d 0f 1f 40 00 66 66 2e 0f 1f 84 [ 9849.534986] RSP: 0018:ffff8881bb8076b0 EFLAGS: 00010246 [ 9849.536198] RAX: 0000000000000000 RBX: ffffea00070c8980 RCX: 0000000000000000 [ 9849.537718] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 9849.539321] RBP: ffff8881bb8076b8 R08: 0000000000000000 R09: 0000000000000000 [ 9849.540862] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000010782000 [ 9849.542438] R13: ffff8881935de738 R14: ffff88816110d010 R15: 0000000000001000 [ 9849.543996] FS: 00007e36cbe94740(0000) GS:ffff88824b899000(0000) knlGS:0000000000000000 [ 9849.545854] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9849.547092] CR2: 00007e36cb3ff000 CR3: 000000011bbf6006 CR4: 0000000000772ef0 [ 9849.548679] PKRU: 55555554 The race sequence: 1. Read completes -> netfs_read_collection() runs 2. netfs_wake_rreq_flag(rreq, NETFS_RREQ_IN_PROGRESS, ...) 3. netfs_wait_for_read() returns -EFAULT to netfs_write_begin() 4. The netfs_unlock_abandoned_read_pages() unlocks the folio 5. netfs_write_begin() calls folio_unlock(folio) -> VM_BUG_ON_FOLIO() The key reason of the issue that netfs_unlock_abandoned_read_pages() doesn't check the flag NETFS_RREQ_NO_UNLOCK_FOLIO and executes folio_unlock() unconditionally. This patch implements in netfs_unlock_abandoned_read_pages() logic similar to netfs_unlock_read_folio(). Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Signed-off-by: Viacheslav Dubeyko Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-8-dhowells@redhat.com Reviewed-by: Paulo Alcantara (Red Hat) cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org cc: Ceph Development Signed-off-by: Christian Brauner --- fs/netfs/read_retry.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/netfs/read_retry.c b/fs/netfs/read_retry.c index 5ec548b996d6..e10eb5a07332 100644 --- a/fs/netfs/read_retry.c +++ b/fs/netfs/read_retry.c @@ -292,8 +292,15 @@ void netfs_unlock_abandoned_read_pages(struct netfs_io_request *rreq) struct folio *folio = folioq_folio(p, slot); if (folio && !folioq_is_marked2(p, slot)) { - trace_netfs_folio(folio, netfs_folio_trace_abandon); - folio_unlock(folio); + if (folio->index == rreq->no_unlock_folio && + test_bit(NETFS_RREQ_NO_UNLOCK_FOLIO, + &rreq->flags)) { + _debug("no unlock"); + } else { + trace_netfs_folio(folio, + netfs_folio_trace_abandon); + folio_unlock(folio); + } } } } -- cgit v1.2.3 From 7e3d8db899d54af39fafb2eb3392b0cdae9973b5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:45 +0100 Subject: netfs: Fix potential uninitialised var in netfs_extract_user_iter() In netfs_extract_user_iter(), if it's given a zero-length iterator, it will fall through the loop without setting ret, and so the error handling behaviour will be undefined, depending on whether ret happens to be negative. The value of ret then propagates back up the callstack. Fix this by presetting ret to 0. Fixes: 85dd2c8ff368 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator") Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-9-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/iterator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/netfs/iterator.c b/fs/netfs/iterator.c index 154a14bb2d7f..6903028b7162 100644 --- a/fs/netfs/iterator.c +++ b/fs/netfs/iterator.c @@ -43,7 +43,7 @@ ssize_t netfs_extract_user_iter(struct iov_iter *orig, size_t orig_len, unsigned int max_pages; unsigned int npages = 0; unsigned int i; - ssize_t ret; + ssize_t ret = 0; size_t count = orig_len, offset, len; size_t bv_size, pg_size; -- cgit v1.2.3 From 0aad5704c6b4d14007d4eab15883e8524e4310f4 Mon Sep 17 00:00:00 2001 From: Paulo Alcantara Date: Tue, 12 May 2026 13:33:46 +0100 Subject: netfs: fix error handling in netfs_extract_user_iter() In netfs_extract_user_iter(), if iov_iter_extract_pages() failed to extract user pages, bail out on -ENOMEM, otherwise return the error code only if @npages == 0, allowing short DIO reads and writes to be issued. This fixes mmapstress02 from LTP tests against CIFS. Fixes: 85dd2c8ff368 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator") Reported-by: Xiaoli Feng Signed-off-by: Paulo Alcantara (Red Hat) Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-10-dhowells@redhat.com Cc: netfs@lists.linux.dev Cc: stable@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/iterator.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/fs/netfs/iterator.c b/fs/netfs/iterator.c index 6903028b7162..429e4396e1b0 100644 --- a/fs/netfs/iterator.c +++ b/fs/netfs/iterator.c @@ -22,7 +22,7 @@ * * Extract the page fragments from the given amount of the source iterator and * build up a second iterator that refers to all of those bits. This allows - * the original iterator to disposed of. + * the original iterator to be disposed of. * * @extraction_flags can have ITER_ALLOW_P2PDMA set to request peer-to-peer DMA be * allowed on the pages extracted. @@ -67,8 +67,8 @@ ssize_t netfs_extract_user_iter(struct iov_iter *orig, size_t orig_len, ret = iov_iter_extract_pages(orig, &pages, count, max_pages - npages, extraction_flags, &offset); - if (ret < 0) { - pr_err("Couldn't get user pages (rc=%zd)\n", ret); + if (unlikely(ret <= 0)) { + ret = ret ?: -EIO; break; } @@ -97,6 +97,13 @@ ssize_t netfs_extract_user_iter(struct iov_iter *orig, size_t orig_len, npages += cur_npages; } + if (ret < 0 && (ret == -ENOMEM || npages == 0)) { + for (i = 0; i < npages; i++) + unpin_user_page(bv[i].bv_page); + kvfree(bv); + return ret; + } + iov_iter_bvec(new, orig->data_source, bv, npages, orig_len - count); return npages; } -- cgit v1.2.3 From 0ef37eef83fad3542ee06db2940433ae1a92b39d Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:47 +0100 Subject: netfs: Fix overrun check in netfs_extract_user_iter() Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills pages[], then those pages don't get included in the iterator constructed at the end of the function. If there was an overfill, memory corruption has already happened. Fixes: 85dd2c8ff368 ("netfs: Add a function to extract a UBUF or IOVEC into a BVEC iterator") Closes: https://sashiko.dev/#/patchset/20260427154639.180684-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-11-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/iterator.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/fs/netfs/iterator.c b/fs/netfs/iterator.c index 429e4396e1b0..b375567e0520 100644 --- a/fs/netfs/iterator.c +++ b/fs/netfs/iterator.c @@ -72,21 +72,24 @@ ssize_t netfs_extract_user_iter(struct iov_iter *orig, size_t orig_len, break; } - if (ret > count) { - pr_err("get_pages rc=%zd more than %zu\n", ret, count); + if (WARN(ret > count, + "%s: extract_pages overrun %zd > %zu bytes\n", + __func__, ret, count)) { + ret = -EIO; break; } - count -= ret; - ret += offset; - cur_npages = DIV_ROUND_UP(ret, PAGE_SIZE); - - if (npages + cur_npages > max_pages) { - pr_err("Out of bvec array capacity (%u vs %u)\n", - npages + cur_npages, max_pages); + cur_npages = DIV_ROUND_UP(offset + ret, PAGE_SIZE); + if (WARN(cur_npages > max_pages - npages, + "%s: extract_pages overrun %u > %u pages\n", + __func__, npages + cur_npages, max_pages)) { + ret = -EIO; break; } + count -= ret; + ret += offset; + for (i = 0; i < cur_npages; i++) { len = ret > PAGE_SIZE ? PAGE_SIZE : ret; bvec_set_page(bv + npages + i, *pages++, len - offset, offset); @@ -97,6 +100,11 @@ ssize_t netfs_extract_user_iter(struct iov_iter *orig, size_t orig_len, npages += cur_npages; } + /* Note: Don't try to clean up after EIO. Either we got no pages, so + * nothing to clean up, or we got a buffer overrun, memory corruption + * and can't trust the stuff in the buffer (a WARN was emitted). + */ + if (ret < 0 && (ret == -ENOMEM || npages == 0)) { for (i = 0; i < npages; i++) unpin_user_page(bv[i].bv_page); -- cgit v1.2.3 From 156ac2ec2ee77c44c4eb7439d6d165247ba12247 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:48 +0100 Subject: netfs: Fix netfs_invalidate_folio() to clear dirty bit if all changes gone If a streaming write is made, this will leave the relevant modified folio in a not-uptodate, but dirty state with a netfs_folio struct hung off of folio->private indicating the dirty range. Subsequently truncating the file such that the dirty data in the folio is removed, but the first part of the folio theoretically remains will cause the netfs_folio struct to be discarded... but will leave the dirty flag set. If the folio is then read via mmap(), netfs_read_folio() will see that the page is dirty and jump to netfs_read_gaps() to fill in the missing bits. netfs_read_gaps(), however, expects there to be a netfs_folio struct present and can oops because truncate removed it. Fix this by calling folio_cancel_dirty() in netfs_invalidate_folio() in the event that all the dirty data in the folio is erased (as nfs does). Also add some tracepoints to log modifications to a dirty page. This can be reproduced with something like: dd if=/dev/zero of=/xfstest.test/foo bs=1M count=1 umount /xfstest.test mount /xfstest.test xfs_io -c "w 0xbbbf 0xf96c" \ -c "truncate 0xbbbf" \ -c "mmap -r 0xb000 0x11000" \ -c "mr 0xb000 0x11000" \ /xfstest.test/foo with fscaching disabled (otherwise streaming writes are suppressed) and a change to netfs_perform_write() to disallow streaming writes if the fd is open O_RDWR: if (//(file->f_mode & FMODE_READ) || <--- comment this out netfs_is_cache_enabled(ctx)) { It should be reproducible even without this change, but if prevents the above trivial xfs_io command from reproducing it. Note that the initial dd is important: the file must start out sufficiently large that the zero-point logic doesn't just clear the gaps because it knows there's nothing in the file to read yet. Unmounting and mounting is needed to clear the pagecache (there are other ways to do that that may also work). This was initially reproduced with the generic/522 xfstest on some patches that remove the FMODE_READ restriction. Fixes: 9ebff83e6481 ("netfs: Prep to use folio->private for write grouping and streaming write") Reported-by: Marc Dionne Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-12-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/misc.c | 6 +++++- include/trace/events/netfs.h | 4 ++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/netfs/misc.c b/fs/netfs/misc.c index 723571ca1b88..24b20e80e9a8 100644 --- a/fs/netfs/misc.c +++ b/fs/netfs/misc.c @@ -263,6 +263,7 @@ void netfs_invalidate_folio(struct folio *folio, size_t offset, size_t length) /* Move the start of the data. */ finfo->dirty_len = fend - iend; finfo->dirty_offset = offset; + trace_netfs_folio(folio, netfs_folio_trace_invalidate_front); return; } @@ -271,12 +272,14 @@ void netfs_invalidate_folio(struct folio *folio, size_t offset, size_t length) */ if (iend >= fend) { finfo->dirty_len = offset - fstart; + trace_netfs_folio(folio, netfs_folio_trace_invalidate_tail); return; } /* A partial write was split. The caller has already zeroed * it, so just absorb the hole. */ + trace_netfs_folio(folio, netfs_folio_trace_invalidate_middle); } return; @@ -284,8 +287,9 @@ erase_completely: netfs_put_group(netfs_folio_group(folio)); folio_detach_private(folio); folio_clear_uptodate(folio); + folio_cancel_dirty(folio); kfree(finfo); - return; + trace_netfs_folio(folio, netfs_folio_trace_invalidate_all); } EXPORT_SYMBOL(netfs_invalidate_folio); diff --git a/include/trace/events/netfs.h b/include/trace/events/netfs.h index 8c936fc575d5..0b702f74aefe 100644 --- a/include/trace/events/netfs.h +++ b/include/trace/events/netfs.h @@ -194,6 +194,10 @@ EM(netfs_folio_trace_copy_to_cache, "mark-copy") \ EM(netfs_folio_trace_end_copy, "end-copy") \ EM(netfs_folio_trace_filled_gaps, "filled-gaps") \ + EM(netfs_folio_trace_invalidate_all, "inval-all") \ + EM(netfs_folio_trace_invalidate_front, "inval-front") \ + EM(netfs_folio_trace_invalidate_middle, "inval-mid") \ + EM(netfs_folio_trace_invalidate_tail, "inval-tail") \ EM(netfs_folio_trace_kill, "kill") \ EM(netfs_folio_trace_kill_cc, "kill-cc") \ EM(netfs_folio_trace_kill_g, "kill-g") \ -- cgit v1.2.3 From daeb443b92817021c1234e8eded219e164b7c35d Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:49 +0100 Subject: netfs: Defer the emission of trace_netfs_folio() Change netfs_perform_write() to keep the netfs_folio trace value in a variable and emit it later to make it easier to choose the value displayed. This is a prerequisite for a subsequent patch. Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-13-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_write.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/fs/netfs/buffered_write.c b/fs/netfs/buffered_write.c index b6ecd059dc4f..278aeb074e75 100644 --- a/fs/netfs/buffered_write.c +++ b/fs/netfs/buffered_write.c @@ -149,6 +149,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, } do { + enum netfs_folio_trace trace; struct netfs_folio *finfo; struct netfs_group *group; unsigned long long fpos; @@ -222,7 +223,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, if (unlikely(copied == 0)) goto copy_failed; netfs_set_group(folio, netfs_group); - trace_netfs_folio(folio, netfs_folio_is_uptodate); + trace = netfs_folio_is_uptodate; goto copied; } @@ -238,7 +239,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, folio_zero_segment(folio, offset + copied, flen); __netfs_set_group(folio, netfs_group); folio_mark_uptodate(folio); - trace_netfs_folio(folio, netfs_modify_and_clear); + trace = netfs_modify_and_clear; goto copied; } @@ -256,7 +257,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, } __netfs_set_group(folio, netfs_group); folio_mark_uptodate(folio); - trace_netfs_folio(folio, netfs_whole_folio_modify); + trace = netfs_whole_folio_modify; goto copied; } @@ -283,7 +284,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, if (unlikely(copied == 0)) goto copy_failed; netfs_set_group(folio, netfs_group); - trace_netfs_folio(folio, netfs_just_prefetch); + trace = netfs_just_prefetch; goto copied; } @@ -297,7 +298,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, if (offset == 0 && copied == flen) { __netfs_set_group(folio, netfs_group); folio_mark_uptodate(folio); - trace_netfs_folio(folio, netfs_streaming_filled_page); + trace = netfs_streaming_filled_page; goto copied; } @@ -312,7 +313,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, finfo->dirty_len = copied; folio_attach_private(folio, (void *)((unsigned long)finfo | NETFS_FOLIO_INFO)); - trace_netfs_folio(folio, netfs_streaming_write); + trace = netfs_streaming_write; goto copied; } @@ -332,9 +333,9 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, folio_detach_private(folio); folio_mark_uptodate(folio); kfree(finfo); - trace_netfs_folio(folio, netfs_streaming_cont_filled_page); + trace = netfs_streaming_cont_filled_page; } else { - trace_netfs_folio(folio, netfs_streaming_write_cont); + trace = netfs_streaming_write_cont; } goto copied; } @@ -350,6 +351,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, continue; copied: + trace_netfs_folio(folio, trace); flush_dcache_folio(folio); /* Update the inode size if we moved the EOF marker */ -- cgit v1.2.3 From 7b4dcf1b9455a6e52ac7478b4057dbe10359576d Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:50 +0100 Subject: netfs: Fix streaming write being overwritten In order to avoid reading whilst writing, netfslib will allow "streaming writes" in which dirty data is stored directly into folios without reading them first. Such folios are marked dirty but may not be marked uptodate. If a folio is entirely written by a streaming write, uptodate will be set, otherwise it will have a netfs_folio struct attached to ->private recording the dirty region. In the event that a partially written streaming write page is to be overwritten entirely by a single write(), netfs_perform_write() will try to copy over it, but doesn't discard the netfs_folio if it succeeds; further, it doesn't correctly handle a partial copy that overwrites some of the dirty data. Fix this by the following: (1) If the folio is successfully overwritten, free the netfs_folio struct before marking the page uptodate. (2) If the copy to the folio partially fails, but short of the dirty data, just ignore the copy. (3) If the copy partially fails and overwrites some of the dirty data, accept the copy, update the netfs_folio struct to record the new data. If the folio is now filled, free the netfs_folio and set uptodate, otherwise return a partial write. Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0 0x927c0 write 0x63fb8 0x53c8 0 copy_range 0xb704 0x19b9 0x24429 0x79380 write 0x2402b 0x144a2 0x90660 * write 0x204d5 0x140a0 0x927c0 * copy_range 0x1f72c 0x137d0 0x7a906 0x927c0 * read 0x00000 0x20000 0x9157c read 0x20000 0x20000 0x9157c read 0x40000 0x20000 0x9157c read 0x60000 0x20000 0x9157c read 0x7e1a0 0xcfb9 0x9157c on cifs with the default cache option. It shows folio 0x24 misbehaving if the FMODE_READ check is commented out in netfs_perform_write(): if (//(file->f_mode & FMODE_READ) || netfs_is_cache_enabled(ctx)) { and no fscache. This was initially found with the generic/522 xfstest. Fixes: 8f52de0077ba ("netfs: Reduce number of conditional branches in netfs_perform_write()") Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-14-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_write.c | 47 ++++++++++++++++++++++++++++++++------------ include/trace/events/netfs.h | 3 +++ 2 files changed, 37 insertions(+), 13 deletions(-) diff --git a/fs/netfs/buffered_write.c b/fs/netfs/buffered_write.c index 278aeb074e75..991552724868 100644 --- a/fs/netfs/buffered_write.c +++ b/fs/netfs/buffered_write.c @@ -246,18 +246,38 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, /* See if we can write a whole folio in one go. */ if (!maybe_trouble && offset == 0 && part >= flen) { copied = copy_folio_from_iter_atomic(folio, offset, part, iter); - if (unlikely(copied == 0)) + if (likely(copied == part)) { + if (finfo) { + trace = netfs_whole_folio_modify_filled; + goto folio_now_filled; + } + __netfs_set_group(folio, netfs_group); + folio_mark_uptodate(folio); + trace = netfs_whole_folio_modify; + goto copied; + } + if (copied == 0) goto copy_failed; - if (unlikely(copied < part)) { + if (!finfo || copied <= finfo->dirty_offset) { maybe_trouble = true; iov_iter_revert(iter, copied); copied = 0; folio_unlock(folio); goto retry; } - __netfs_set_group(folio, netfs_group); - folio_mark_uptodate(folio); - trace = netfs_whole_folio_modify; + + /* We overwrote some existing dirty data, so we have to + * accept the partial write. + */ + finfo->dirty_len += finfo->dirty_offset; + if (finfo->dirty_len == flen) { + trace = netfs_whole_folio_modify_filled_efault; + goto folio_now_filled; + } + if (copied > finfo->dirty_len) + finfo->dirty_len = copied; + finfo->dirty_offset = 0; + trace = netfs_whole_folio_modify_efault; goto copied; } @@ -327,16 +347,10 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, goto copy_failed; finfo->dirty_len += copied; if (finfo->dirty_offset == 0 && finfo->dirty_len == flen) { - if (finfo->netfs_group) - folio_change_private(folio, finfo->netfs_group); - else - folio_detach_private(folio); - folio_mark_uptodate(folio); - kfree(finfo); trace = netfs_streaming_cont_filled_page; - } else { - trace = netfs_streaming_write_cont; + goto folio_now_filled; } + trace = netfs_streaming_write_cont; goto copied; } @@ -350,6 +364,13 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, goto out; continue; + folio_now_filled: + if (finfo->netfs_group) + folio_change_private(folio, finfo->netfs_group); + else + folio_detach_private(folio); + folio_mark_uptodate(folio); + kfree(finfo); copied: trace_netfs_folio(folio, trace); flush_dcache_folio(folio); diff --git a/include/trace/events/netfs.h b/include/trace/events/netfs.h index 0b702f74aefe..aa9940ba307b 100644 --- a/include/trace/events/netfs.h +++ b/include/trace/events/netfs.h @@ -177,6 +177,9 @@ EM(netfs_folio_is_uptodate, "mod-uptodate") \ EM(netfs_just_prefetch, "mod-prefetch") \ EM(netfs_whole_folio_modify, "mod-whole-f") \ + EM(netfs_whole_folio_modify_efault, "mod-whole-f!") \ + EM(netfs_whole_folio_modify_filled, "mod-whole-f+") \ + EM(netfs_whole_folio_modify_filled_efault, "mod-whole-f+!") \ EM(netfs_modify_and_clear, "mod-n-clear") \ EM(netfs_streaming_write, "mod-streamw") \ EM(netfs_streaming_write_cont, "mod-streamw+") \ -- cgit v1.2.3 From b6a4ae1634b3ad2aaa05222e53d36da532852faf Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:51 +0100 Subject: netfs: Fix potential deadlock in write-through mode Fix netfs_advance_writethrough() to always unlock the supplied folio and to mark it dirty if it isn't yet written to the end. Unfortunately, it can't be marked for writeback until the folio is done with as that may cause a deadlock against mmapped reads and writes. Even though it has been marked dirty, premature writeback can't occur as the caller is holding both inode->i_rwsem (which will prevent concurrent truncation, fallocation, DIO and other writes) and ictx->wb_lock (which will cause flushing to wait and writeback to skip or wait). Note that this may be easier to deal with once the queuing of folios is split from the generation of subrequests. Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Closes: https://sashiko.dev/#/patchset/20260427154639.180684-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-15-dhowells@redhat.com cc: Paulo Alcantara cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/write_issue.c | 39 +++++++++++++++++++++++++-------------- 1 file changed, 25 insertions(+), 14 deletions(-) diff --git a/fs/netfs/write_issue.c b/fs/netfs/write_issue.c index b0e9690bb90c..03961622996b 100644 --- a/fs/netfs/write_issue.c +++ b/fs/netfs/write_issue.c @@ -414,12 +414,7 @@ static int netfs_write_folio(struct netfs_io_request *wreq, if (streamw) netfs_issue_write(wreq, cache); - /* Flip the page to the writeback state and unlock. If we're called - * from write-through, then the page has already been put into the wb - * state. - */ - if (wreq->origin == NETFS_WRITEBACK) - folio_start_writeback(folio); + folio_start_writeback(folio); folio_unlock(folio); if (fgroup == NETFS_FOLIO_COPY_TO_CACHE) { @@ -647,29 +642,41 @@ int netfs_advance_writethrough(struct netfs_io_request *wreq, struct writeback_c struct folio *folio, size_t copied, bool to_page_end, struct folio **writethrough_cache) { + int ret; + _enter("R=%x ic=%zu ws=%u cp=%zu tp=%u", wreq->debug_id, wreq->buffer.iter.count, wreq->wsize, copied, to_page_end); - if (!*writethrough_cache) { - if (folio_test_dirty(folio)) - /* Sigh. mmap. */ - folio_clear_dirty_for_io(folio); + /* The folio is locked. */ + if (*writethrough_cache != folio) { + if (*writethrough_cache) { + /* Did the folio get moved? */ + folio_put(*writethrough_cache); + *writethrough_cache = NULL; + } /* We can make multiple writes to the folio... */ - folio_start_writeback(folio); if (wreq->len == 0) trace_netfs_folio(folio, netfs_folio_trace_wthru); else trace_netfs_folio(folio, netfs_folio_trace_wthru_plus); *writethrough_cache = folio; + folio_get(folio); } wreq->len += copied; - if (!to_page_end) + + if (!to_page_end) { + folio_mark_dirty(folio); + folio_unlock(folio); return 0; + } + ret = netfs_write_folio(wreq, wbc, folio); + folio_put(*writethrough_cache); *writethrough_cache = NULL; - return netfs_write_folio(wreq, wbc, folio); + wreq->submitted = wreq->len; + return ret; } /* @@ -683,8 +690,12 @@ ssize_t netfs_end_writethrough(struct netfs_io_request *wreq, struct writeback_c _enter("R=%x", wreq->debug_id); - if (writethrough_cache) + if (writethrough_cache) { + folio_lock(writethrough_cache); netfs_write_folio(wreq, wbc, writethrough_cache); + folio_put(writethrough_cache); + wreq->submitted = wreq->len; + } netfs_end_issue_write(wreq); -- cgit v1.2.3 From a41168aef634356a9b87ec44349e3c82835700a5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:52 +0100 Subject: netfs: Fix read-gaps to remove netfs_folio from filled folio Fix netfs_read_gaps() to remove the netfs_folio record from the folio record before marking the folio uptodate if it successfully fills the gaps around the dirty data in a streaming write folio (dirty, but not uptodate). Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0x138b1 0x8b15d * write 0x507ee 0x10df7 0x927c0 write 0x19993 0x10e04 0x927c0 * mapwrite 0x66214 0x1a253 0x927c0 copy_range 0xb704 0x89b9 0x24429 0x79380 write 0x2402b 0x144a2 0x90660 * mapwrite 0x204d5 0x140a0 0x927c0 * copy_range 0x1f72c 0x137d0 0x7a906 0x927c0 * read 0 0x9157c 0x9157c on cifs with the default cache option. It shows folio 0x24 misbehaving if the FMODE_READ check is commented out in netfs_perform_write(): if (//(file->f_mode & FMODE_READ) || netfs_is_cache_enabled(ctx)) { and no fscache. This was initially found with the generic/522 xfstest. Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-16-dhowells@redhat.com Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_read.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index ebd84a6cc3f0..51f844bfbdff 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -395,6 +395,7 @@ static int netfs_read_gaps(struct file *file, struct folio *folio) { struct netfs_io_request *rreq; struct address_space *mapping = folio->mapping; + struct netfs_group *group = netfs_folio_group(folio); struct netfs_folio *finfo = netfs_folio_info(folio); struct netfs_inode *ctx = netfs_inode(mapping->host); struct folio *sink = NULL; @@ -461,6 +462,12 @@ static int netfs_read_gaps(struct file *file, struct folio *folio) ret = netfs_wait_for_read(rreq); if (ret >= 0) { + if (group) + folio_change_private(folio, group); + else + folio_detach_private(folio); + kfree(finfo); + trace_netfs_folio(folio, netfs_folio_trace_filled_gaps); flush_dcache_folio(folio); folio_mark_uptodate(folio); } @@ -496,10 +503,8 @@ int netfs_read_folio(struct file *file, struct folio *folio) struct netfs_inode *ctx = netfs_inode(mapping->host); int ret; - if (folio_test_dirty(folio)) { - trace_netfs_folio(folio, netfs_folio_trace_read_gaps); + if (folio_test_dirty(folio)) return netfs_read_gaps(file, folio); - } _enter("%lx", folio->index); -- cgit v1.2.3 From 70a7b9193bbbfceaab5974de66834c64ccc875dd Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:53 +0100 Subject: netfs: Fix write streaming disablement if fd open O_RDWR In netfs_perform_write(), "write streaming" (the caching of dirty data in dirty but !uptodate folios) is performed to avoid the need to read data that is just going to get immediately overwritten. However, this is/will be disabled in three circumstances: if the fd is open O_RDWR, if fscache is in use (as we need to round out the blocks for DIO) or if content encryption is enabled (again for rounding out purposes). The idea behind disabling it if the fd is open O_RDWR is that we'd need to flush the write-streaming page before we could read the data, particularly through mmap. But netfs now fills in the gaps if ->read_folio() is called on the page, so that is unnecessary. Further, this doesn't actually work if a separate fd is open for reading. Fix this by removing the check for O_RDWR, thereby allowing streaming writes even when we might read. This caused a number of problems with the generic/522 xfstest, but those are now fixed. Fixes: c38f4e96e605 ("netfs: Provide func to copy data to pagecache for buffered write") Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-17-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_write.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/fs/netfs/buffered_write.c b/fs/netfs/buffered_write.c index 991552724868..f79fb5996540 100644 --- a/fs/netfs/buffered_write.c +++ b/fs/netfs/buffered_write.c @@ -203,11 +203,11 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, } /* Decide how we should modify a folio. We might be attempting - * to do write-streaming, in which case we don't want to a - * local RMW cycle if we can avoid it. If we're doing local - * caching or content crypto, we award that priority over - * avoiding RMW. If the file is open readably, then we also - * assume that we may want to read what we wrote. + * to do write-streaming, as we don't want to a local RMW cycle + * if we can avoid it. If we're doing local caching or content + * crypto, we award that priority over avoiding RMW. If the + * file is open readably, then we let ->read_folio() fill in + * the gaps. */ finfo = netfs_folio_info(folio); group = netfs_folio_group(folio); @@ -283,12 +283,9 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, /* We don't want to do a streaming write on a file that loses * caching service temporarily because the backing store got - * culled and we don't really want to get a streaming write on - * a file that's open for reading as ->read_folio() then has to - * be able to flush it. + * culled. */ - if ((file->f_mode & FMODE_READ) || - netfs_is_cache_enabled(ctx)) { + if (netfs_is_cache_enabled(ctx)) { if (finfo) { netfs_stat(&netfs_n_wh_wstream_conflict); goto flush_content; -- cgit v1.2.3 From 3e5dd91b87a8b1450217b56a336bee315f40da7d Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:54 +0100 Subject: netfs: Fix early put of sink folio in netfs_read_gaps() Fix netfs_read_gaps() to release the sink page it uses after waiting for the request to complete. The way the sink page is used is that an ITER_BVEC-class iterator is created that has the gaps from the target folio at either end, but has the sink page tiled over the middle so that a single read op can fill in both gaps. The bug was found by KASAN detecting a UAF on the generic/075 xfstest in the cifsd kernel thread that handles reception of data from the TCP socket: BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20 Write of size 885 at addr ffff888107f92000 by task cifsd/1285 CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy) Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x17f/0x4f1 kasan_report+0x100/0x1e0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x3c/0x60 _copy_to_iter+0x48a/0xa20 __skb_datagram_iter+0x2c9/0x430 skb_copy_datagram_iter+0x6e/0x160 tcp_recvmsg_locked+0xce0/0x1130 tcp_recvmsg+0xeb/0x300 inet_recvmsg+0xcf/0x3a0 sock_recvmsg+0xea/0x100 cifs_readv_from_socket+0x3a6/0x4d0 [cifs] cifs_read_iter_from_socket+0xdd/0x130 [cifs] cifs_readv_receive+0xaad/0xb10 [cifs] cifs_demultiplex_thread+0x1148/0x1740 [cifs] kthread+0x1cf/0x210 Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Reported-by: Steve French Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-18-dhowells@redhat.com Reviewed-by: Paulo Alcantara (Red Hat) cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_read.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index 51f844bfbdff..e7ad511e494c 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -457,9 +457,6 @@ static int netfs_read_gaps(struct file *file, struct folio *folio) netfs_read_to_pagecache(rreq, NULL); - if (sink) - folio_put(sink); - ret = netfs_wait_for_read(rreq); if (ret >= 0) { if (group) @@ -471,6 +468,9 @@ static int netfs_read_gaps(struct file *file, struct folio *folio) flush_dcache_folio(folio); folio_mark_uptodate(folio); } + + if (sink) + folio_put(sink); folio_unlock(folio); netfs_put_request(rreq, netfs_rreq_trace_put_return); return ret < 0 ? ret : 0; -- cgit v1.2.3 From 5046a34f0643441f05b0253ea64e1a3af87efe14 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:55 +0100 Subject: netfs: Fix leak of request in netfs_write_begin() error handling Fix netfs_write_begin() to not leak our ref on the request in the event that we get an error from netfs_wait_for_read(). Fixes: 4090b31422a6 ("netfs: Add a function to consolidate beginning a read") Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-19-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_read.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index e7ad511e494c..004d426c02b4 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -687,9 +687,9 @@ retry: netfs_read_to_pagecache(rreq, NULL); ret = netfs_wait_for_read(rreq); + netfs_put_request(rreq, netfs_rreq_trace_put_return); if (ret < 0) goto error; - netfs_put_request(rreq, netfs_rreq_trace_put_return); have_folio: ret = folio_wait_private_2_killable(folio); -- cgit v1.2.3 From dbe556972100fabb8e5a1b3d2163831ff07b1e8e Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:56 +0100 Subject: netfs: Fix potential UAF in netfs_unlock_abandoned_read_pages() netfs_unlock_abandoned_read_pages(rreq) accesses the index of the folios it is wanting to unlock and compares that to rreq->no_unlock_folio so that it doesn't unlock a folio being read for netfs_perform_write() or netfs_write_begin(). However, given that netfs_unlock_abandoned_read_pages() is called _after_ NETFS_RREQ_IN_PROGRESS is cleared, the one folio that it's not allowed to dereference is the one specified by ->no_unlock_folio as ownership immediately reverts to the caller. Fix this by storing the folio pointer instead and using that rather than the index. Also fix netfs_unlock_read_folio() where the same applies. Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-20-dhowells@redhat.com cc: Paulo Alcantara cc: Viacheslav Dubeyko cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_read.c | 4 ++-- fs/netfs/read_collect.c | 2 +- fs/netfs/read_retry.c | 2 +- include/linux/netfs.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index 004d426c02b4..83d0b8153e96 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -670,7 +670,7 @@ retry: ret = PTR_ERR(rreq); goto error; } - rreq->no_unlock_folio = folio->index; + rreq->no_unlock_folio = folio; __set_bit(NETFS_RREQ_NO_UNLOCK_FOLIO, &rreq->flags); ret = netfs_begin_cache_read(rreq, ctx); @@ -736,7 +736,7 @@ int netfs_prefetch_for_write(struct file *file, struct folio *folio, goto error; } - rreq->no_unlock_folio = folio->index; + rreq->no_unlock_folio = folio; __set_bit(NETFS_RREQ_NO_UNLOCK_FOLIO, &rreq->flags); ret = netfs_begin_cache_read(rreq, ctx); if (ret == -ENOMEM || ret == -EINTR || ret == -ERESTARTSYS) diff --git a/fs/netfs/read_collect.c b/fs/netfs/read_collect.c index 3c9b847885c2..23660a590124 100644 --- a/fs/netfs/read_collect.c +++ b/fs/netfs/read_collect.c @@ -83,7 +83,7 @@ static void netfs_unlock_read_folio(struct netfs_io_request *rreq, } just_unlock: - if (folio->index == rreq->no_unlock_folio && + if (folio == rreq->no_unlock_folio && test_bit(NETFS_RREQ_NO_UNLOCK_FOLIO, &rreq->flags)) { _debug("no unlock"); } else { diff --git a/fs/netfs/read_retry.c b/fs/netfs/read_retry.c index e10eb5a07332..f59a70f3a086 100644 --- a/fs/netfs/read_retry.c +++ b/fs/netfs/read_retry.c @@ -292,7 +292,7 @@ void netfs_unlock_abandoned_read_pages(struct netfs_io_request *rreq) struct folio *folio = folioq_folio(p, slot); if (folio && !folioq_is_marked2(p, slot)) { - if (folio->index == rreq->no_unlock_folio && + if (folio == rreq->no_unlock_folio && test_bit(NETFS_RREQ_NO_UNLOCK_FOLIO, &rreq->flags)) { _debug("no unlock"); diff --git a/include/linux/netfs.h b/include/linux/netfs.h index 4fd1d796ad73..243c0f737938 100644 --- a/include/linux/netfs.h +++ b/include/linux/netfs.h @@ -252,7 +252,7 @@ struct netfs_io_request { unsigned long long collected_to; /* Point we've collected to */ unsigned long long cleaned_to; /* Position we've cleaned folios to */ unsigned long long abandon_to; /* Position to abandon folios to */ - pgoff_t no_unlock_folio; /* Don't unlock this folio after read */ + const struct folio *no_unlock_folio; /* Don't unlock this folio after read */ unsigned int direct_bv_count; /* Number of elements in direct_bv[] */ unsigned int debug_id; unsigned int rsize; /* Maximum read size (0 for none) */ -- cgit v1.2.3 From 6d91acc7fb85d33ea58fca9b964a32a453937f4b Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:57 +0100 Subject: netfs: Fix partial invalidation of streaming-write folio In netfs_invalidate_folio(), if the region of a partial invalidation overlaps the front (but not all) of a dirty write cached in a streaming write page (dirty, but not uptodate, with the dirty region tracked by a netfs_folio struct), the function modifies the dirty region - but incorrectly as it moves the region forward by setting the start to the start, not the end, of the invalidation region. Fix this by setting finfo->dirty_offset to the end of the invalidation region (iend). Fixes: cce6bfa6ca0e ("netfs: Fix trimming of streaming-write folios in netfs_inval_folio()") Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-21-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/misc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/netfs/misc.c b/fs/netfs/misc.c index 24b20e80e9a8..5d554512ed23 100644 --- a/fs/netfs/misc.c +++ b/fs/netfs/misc.c @@ -262,7 +262,7 @@ void netfs_invalidate_folio(struct folio *folio, size_t offset, size_t length) goto erase_completely; /* Move the start of the data. */ finfo->dirty_len = fend - iend; - finfo->dirty_offset = offset; + finfo->dirty_offset = iend; trace_netfs_folio(folio, netfs_folio_trace_invalidate_front); return; } -- cgit v1.2.3 From ccde2ac757c713535b224233a296de40efe5212d Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:58 +0100 Subject: netfs: Fix folio->private handling in netfs_perform_write() Under some circumstances, netfs_perform_write() doesn't correctly manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing to a group and pointing to a netfs_folio struct, leading to potential multiple attachments of private data with associated folio ref leaks and also leaks of netfs_folio structs or netfs_group refs. Fix this by consolidating the place at which a folio is marked uptodate in one place and having that look at what's attached to folio->private and decide how to clean it up and then set the new group. Also, the content shouldn't be flushed if group is NULL, even if a group is specified in the netfs_group parameter, as that would be the case for a new folio. A filesystem should always specify netfs_group or never specify netfs_group. The Sashiko auto-review tool noted that it was theoretically possible that the fpos >= ctx->zero_point section might leak if it modified a streaming write folio. This is unlikely, but with a network filesystem, third party changes can happen. It also pointed out that __netfs_set_group() would leak if called multiple times on the same folio from the "whole folio modify section". Fixes: 8f52de0077ba ("netfs: Reduce number of conditional branches in netfs_perform_write()") Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-22-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_write.c | 134 ++++++++++++++++++++++++++----------------- include/trace/events/netfs.h | 1 + 2 files changed, 82 insertions(+), 53 deletions(-) diff --git a/fs/netfs/buffered_write.c b/fs/netfs/buffered_write.c index f79fb5996540..6bde3320bcec 100644 --- a/fs/netfs/buffered_write.c +++ b/fs/netfs/buffered_write.c @@ -12,24 +12,6 @@ #include #include "internal.h" -static void __netfs_set_group(struct folio *folio, struct netfs_group *netfs_group) -{ - if (netfs_group) - folio_attach_private(folio, netfs_get_group(netfs_group)); -} - -static void netfs_set_group(struct folio *folio, struct netfs_group *netfs_group) -{ - void *priv = folio_get_private(folio); - - if (unlikely(priv != netfs_group)) { - if (netfs_group && (!priv || priv == NETFS_FOLIO_COPY_TO_CACHE)) - folio_attach_private(folio, netfs_get_group(netfs_group)); - else if (!netfs_group && priv == NETFS_FOLIO_COPY_TO_CACHE) - folio_detach_private(folio); - } -} - /* * Grab a folio for writing and lock it. Attempt to allocate as large a folio * as possible to hold as much of the remaining length as possible in one go. @@ -157,6 +139,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, size_t offset; /* Offset into pagecache folio */ size_t part; /* Bytes to write to folio */ size_t copied; /* Bytes copied from user */ + void *priv; offset = pos & (max_chunk - 1); part = min(max_chunk - offset, iov_iter_count(iter)); @@ -202,6 +185,25 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, goto error_folio_unlock; } + finfo = netfs_folio_info(folio); + group = netfs_folio_group(folio); + + /* If the requested group differs from the group set on the + * page, then we need to flush out the folio if it has a group + * set (ie. is non-NULL). Note that COPY_TO_CACHE is a special + * case, being a netfs annotation rather than an actual group. + * + * The filesystem isn't permitted to mix writes with groups and + * writes without groups as the NULL group is used to indicate + * that no group is set. + */ + if (unlikely(group != netfs_group) && + group != NETFS_FOLIO_COPY_TO_CACHE && + group) { + WARN_ON_ONCE(!netfs_group); + goto flush_content; + } + /* Decide how we should modify a folio. We might be attempting * to do write-streaming, as we don't want to a local RMW cycle * if we can avoid it. If we're doing local caching or content @@ -209,22 +211,14 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, * file is open readably, then we let ->read_folio() fill in * the gaps. */ - finfo = netfs_folio_info(folio); - group = netfs_folio_group(folio); - - if (unlikely(group != netfs_group) && - group != NETFS_FOLIO_COPY_TO_CACHE) - goto flush_content; - if (folio_test_uptodate(folio)) { if (mapping_writably_mapped(mapping)) flush_dcache_folio(folio); copied = copy_folio_from_iter_atomic(folio, offset, part, iter); if (unlikely(copied == 0)) goto copy_failed; - netfs_set_group(folio, netfs_group); trace = netfs_folio_is_uptodate; - goto copied; + goto copied_uptodate; } /* If the page is above the zero-point then we assume that the @@ -237,24 +231,22 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, if (unlikely(copied == 0)) goto copy_failed; folio_zero_segment(folio, offset + copied, flen); - __netfs_set_group(folio, netfs_group); - folio_mark_uptodate(folio); - trace = netfs_modify_and_clear; - goto copied; + if (finfo) + trace = netfs_modify_and_clear_rm_finfo; + else + trace = netfs_modify_and_clear; + goto mark_uptodate; } /* See if we can write a whole folio in one go. */ if (!maybe_trouble && offset == 0 && part >= flen) { copied = copy_folio_from_iter_atomic(folio, offset, part, iter); if (likely(copied == part)) { - if (finfo) { + if (finfo) trace = netfs_whole_folio_modify_filled; - goto folio_now_filled; - } - __netfs_set_group(folio, netfs_group); - folio_mark_uptodate(folio); - trace = netfs_whole_folio_modify; - goto copied; + else + trace = netfs_whole_folio_modify; + goto mark_uptodate; } if (copied == 0) goto copy_failed; @@ -272,7 +264,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, finfo->dirty_len += finfo->dirty_offset; if (finfo->dirty_len == flen) { trace = netfs_whole_folio_modify_filled_efault; - goto folio_now_filled; + goto mark_uptodate; } if (copied > finfo->dirty_len) finfo->dirty_len = copied; @@ -300,11 +292,11 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, copied = copy_folio_from_iter_atomic(folio, offset, part, iter); if (unlikely(copied == 0)) goto copy_failed; - netfs_set_group(folio, netfs_group); trace = netfs_just_prefetch; - goto copied; + goto copied_uptodate; } + /* Do a streaming write on a folio that has nothing in it yet. */ if (!finfo) { ret = -EIO; if (WARN_ON(folio_get_private(folio))) @@ -313,10 +305,8 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, if (unlikely(copied == 0)) goto copy_failed; if (offset == 0 && copied == flen) { - __netfs_set_group(folio, netfs_group); - folio_mark_uptodate(folio); trace = netfs_streaming_filled_page; - goto copied; + goto mark_uptodate; } finfo = kzalloc_obj(*finfo); @@ -345,7 +335,7 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, finfo->dirty_len += copied; if (finfo->dirty_offset == 0 && finfo->dirty_len == flen) { trace = netfs_streaming_cont_filled_page; - goto folio_now_filled; + goto mark_uptodate; } trace = netfs_streaming_write_cont; goto copied; @@ -361,13 +351,36 @@ ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter, goto out; continue; - folio_now_filled: - if (finfo->netfs_group) - folio_change_private(folio, finfo->netfs_group); - else - folio_detach_private(folio); + /* Mark a folio as being up to data when we've filled it + * completely. If the folio has a group attached, then it must + * be the same group, otherwise we should have flushed it out + * above. We have to get rid of the netfs_folio struct if + * there was one. + */ + mark_uptodate: folio_mark_uptodate(folio); - kfree(finfo); + + copied_uptodate: + priv = folio_get_private(folio); + if (likely(priv == netfs_group)) { + /* Already set correctly; no change required. */ + } else if (priv == NETFS_FOLIO_COPY_TO_CACHE) { + if (!netfs_group) + folio_detach_private(folio); + else + folio_change_private(folio, netfs_get_group(netfs_group)); + } else if (!priv) { + folio_attach_private(folio, netfs_get_group(netfs_group)); + } else { + WARN_ON_ONCE(!finfo); + if (netfs_group) + /* finfo->netfs_group has a ref */ + folio_change_private(folio, netfs_group); + else + folio_detach_private(folio); + kfree(finfo); + } + copied: trace_netfs_folio(folio, trace); flush_dcache_folio(folio); @@ -530,6 +543,7 @@ vm_fault_t netfs_page_mkwrite(struct vm_fault *vmf, struct netfs_group *netfs_gr struct inode *inode = file_inode(file); struct netfs_inode *ictx = netfs_inode(inode); vm_fault_t ret = VM_FAULT_NOPAGE; + void *priv; int err; _enter("%lx", folio->index); @@ -550,7 +564,9 @@ vm_fault_t netfs_page_mkwrite(struct vm_fault *vmf, struct netfs_group *netfs_gr } group = netfs_folio_group(folio); - if (group != netfs_group && group != NETFS_FOLIO_COPY_TO_CACHE) { + if (group && + group != netfs_group && + group != NETFS_FOLIO_COPY_TO_CACHE) { folio_unlock(folio); err = filemap_fdatawrite_range(mapping, folio_pos(folio), @@ -572,7 +588,19 @@ vm_fault_t netfs_page_mkwrite(struct vm_fault *vmf, struct netfs_group *netfs_gr trace_netfs_folio(folio, netfs_folio_trace_mkwrite_plus); else trace_netfs_folio(folio, netfs_folio_trace_mkwrite); - netfs_set_group(folio, netfs_group); + + priv = folio_get_private(folio); + if (priv != netfs_group) { + if (!netfs_group && priv == NETFS_FOLIO_COPY_TO_CACHE) + folio_detach_private(folio); + else if (netfs_group && priv == NETFS_FOLIO_COPY_TO_CACHE) + folio_change_private(folio, netfs_get_group(netfs_group)); + else if (netfs_group && !priv) + folio_attach_private(folio, netfs_get_group(netfs_group)); + else + WARN_ON_ONCE(1); + } + file_update_time(file); set_bit(NETFS_ICTX_MODIFIED_ATTR, &ictx->flags); if (ictx->ops->post_modify) diff --git a/include/trace/events/netfs.h b/include/trace/events/netfs.h index aa9940ba307b..082cb03c6131 100644 --- a/include/trace/events/netfs.h +++ b/include/trace/events/netfs.h @@ -181,6 +181,7 @@ EM(netfs_whole_folio_modify_filled, "mod-whole-f+") \ EM(netfs_whole_folio_modify_filled_efault, "mod-whole-f+!") \ EM(netfs_modify_and_clear, "mod-n-clear") \ + EM(netfs_modify_and_clear_rm_finfo, "mod-n-clear+") \ EM(netfs_streaming_write, "mod-streamw") \ EM(netfs_streaming_write_cont, "mod-streamw+") \ EM(netfs_flush_content, "flush") \ -- cgit v1.2.3 From ded0c6f1606061148c202825f7e53d711f9f84cf Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:33:59 +0100 Subject: netfs: Fix netfs_read_folio() to wait on writeback Fix netfs_read_folio() to wait for an ongoing writeback to complete so that it can trust the dirty flag and whatever is attached to folio->private (folio->private may get cleaned up by the collector before it clears the writeback flag). Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Closes: https://sashiko.dev/#/patchset/20260414082004.3756080-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-23-dhowells@redhat.com cc: Paulo Alcantara cc: Matthew Wilcox cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/netfs/buffered_read.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/netfs/buffered_read.c b/fs/netfs/buffered_read.c index 83d0b8153e96..76d0f6a29aba 100644 --- a/fs/netfs/buffered_read.c +++ b/fs/netfs/buffered_read.c @@ -503,6 +503,8 @@ int netfs_read_folio(struct file *file, struct folio *folio) struct netfs_inode *ctx = netfs_inode(mapping->host); int ret; + folio_wait_writeback(folio); + if (folio_test_dirty(folio)) return netfs_read_gaps(file, folio); -- cgit v1.2.3 From 9871938f99cc6cb266a77265491660e2375271f5 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:34:00 +0100 Subject: netfs, afs: Fix write skipping in dir/link writepages Fix netfs_write_single() and afs_single_writepages() to better handle a write that would be skipped due to lock contention and WB_SYNC_NONE by returning 1 from netfs_write_single() if it skipped and making afs_single_writepages() skip also. If a skip occurs, the inode must be re-marked as the VFS may have cleared the mark. This is really only theoretical for directories in netfs_write_single() as the only path to that is through afs_single_writepages() that takes the ->validate_lock around it, thereby serialising it. Fixes: 6dd80936618c ("afs: Use netfslib for directories") Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-24-dhowells@redhat.com cc: Marc Dionne cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/afs/dir.c | 11 ++++++++++- fs/netfs/write_issue.c | 7 ++++++- 2 files changed, 16 insertions(+), 2 deletions(-) diff --git a/fs/afs/dir.c b/fs/afs/dir.c index aaaa55878ffd..d1542a1a50bf 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -2206,7 +2206,14 @@ int afs_single_writepages(struct address_space *mapping, /* Need to lock to prevent the folio queue and folios from being thrown * away. */ - down_read(&dvnode->validate_lock); + if (!down_read_trylock(&dvnode->validate_lock)) { + if (wbc->sync_mode == WB_SYNC_NONE) { + /* The VFS will have undirtied the inode. */ + netfs_single_mark_inode_dirty(&dvnode->netfs.inode); + return 0; + } + down_read(&dvnode->validate_lock); + } if (is_dir ? test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) : @@ -2214,6 +2221,8 @@ int afs_single_writepages(struct address_space *mapping, iov_iter_folio_queue(&iter, ITER_SOURCE, dvnode->directory, 0, 0, i_size_read(&dvnode->netfs.inode)); ret = netfs_writeback_single(mapping, wbc, &iter); + if (ret == 1) + ret = 0; /* Skipped write due to lock conflict. */ } up_read(&dvnode->validate_lock); diff --git a/fs/netfs/write_issue.c b/fs/netfs/write_issue.c index 03961622996b..c03c7cc45e47 100644 --- a/fs/netfs/write_issue.c +++ b/fs/netfs/write_issue.c @@ -830,6 +830,9 @@ static int netfs_write_folio_single(struct netfs_io_request *wreq, * * Write a monolithic, non-pagecache object back to the server and/or * the cache. + * + * Return: 0 if successful; 1 if skipped due to lock conflict and WB_SYNC_NONE; + * or a negative error code. */ int netfs_writeback_single(struct address_space *mapping, struct writeback_control *wbc, @@ -846,8 +849,10 @@ int netfs_writeback_single(struct address_space *mapping, if (!mutex_trylock(&ictx->wb_lock)) { if (wbc->sync_mode == WB_SYNC_NONE) { + /* The VFS will have undirtied the inode. */ + netfs_single_mark_inode_dirty(&ictx->inode); netfs_stat(&netfs_n_wb_lock_skip); - return 0; + return 1; } netfs_stat(&netfs_n_wb_lock_wait); mutex_lock(&ictx->wb_lock); -- cgit v1.2.3 From c0410adf3da6db46f3513411fcf95e63c2f1d1ad Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 12 May 2026 13:34:01 +0100 Subject: afs: Fix the locking used by afs_get_link() The afs filesystem in the kernel doesn't do locking correctly for symbolic links. There are a number of problems: (1) It doesn't do any locking around afs_read_single() to prevent races between multiple ->get_link() calls, thereby allowing the possibility of leaks. (2) It doesn't use RCU barriering when accessing the buffer pointers during RCU pathwalk. (3) It can race with another thread updating the contents of the symlink if a third party updated it on the server. Fix this by the following means: (0) Move symlink handling into its own file as this makes it more complicated. (1) Take the validate_lock around afs_read_single() to prevent races between multiple ->get_link() calls. (2) Keep a separate copy of the symlink contents with an rcu_head. This is always going to be a lot smaller than a page, so it can be kmalloc'd and save quite a bit of memory. It also needs a refcount for non-RCU pathwalk. (3) Split the symlink read and write-to-cache routines in afs from those for directories. (4) Discard the I/O buffer as soon as the write-to-cache completes as this is a full page (plus a folio_queue). (5) If there's no cache, discard the I/O buffer immediately after reading and copying if there is no cache. Fixes: eae9e78951bb ("afs: Use netfslib for symlinks, allowing them to be cached") Fixes: 6698c02d64b2 ("afs: Locally initialise the contents of a new symlink on creation") Closes: https://sashiko.dev/#/patchset/20260326104544.509518-1-dhowells%40redhat.com Signed-off-by: David Howells Link: https://patch.msgid.link/20260512123404.719402-25-dhowells@redhat.com cc: Marc Dionne cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner --- fs/afs/Makefile | 1 + fs/afs/dir.c | 68 ++++++------- fs/afs/fsclient.c | 4 +- fs/afs/inode.c | 96 +----------------- fs/afs/internal.h | 34 +++++-- fs/afs/symlink.c | 278 ++++++++++++++++++++++++++++++++++++++++++++++++++++ fs/afs/validation.c | 14 ++- fs/afs/yfsclient.c | 4 +- 8 files changed, 357 insertions(+), 142 deletions(-) create mode 100644 fs/afs/symlink.c diff --git a/fs/afs/Makefile b/fs/afs/Makefile index b49b8fe682f3..0d8f1982d596 100644 --- a/fs/afs/Makefile +++ b/fs/afs/Makefile @@ -30,6 +30,7 @@ kafs-y := \ server.o \ server_list.o \ super.o \ + symlink.o \ validation.o \ vlclient.o \ vl_alias.o \ diff --git a/fs/afs/dir.c b/fs/afs/dir.c index d1542a1a50bf..498b99ccdf0e 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -44,6 +44,8 @@ static int afs_symlink(struct mnt_idmap *idmap, struct inode *dir, static int afs_rename(struct mnt_idmap *idmap, struct inode *old_dir, struct dentry *old_dentry, struct inode *new_dir, struct dentry *new_dentry, unsigned int flags); +static int afs_dir_writepages(struct address_space *mapping, + struct writeback_control *wbc); const struct file_operations afs_dir_file_operations = { .open = afs_dir_open, @@ -68,7 +70,7 @@ const struct inode_operations afs_dir_inode_operations = { }; const struct address_space_operations afs_dir_aops = { - .writepages = afs_single_writepages, + .writepages = afs_dir_writepages, }; const struct dentry_operations afs_fs_dentry_operations = { @@ -233,22 +235,13 @@ static ssize_t afs_do_read_single(struct afs_vnode *dvnode, struct file *file) struct iov_iter iter; ssize_t ret; loff_t i_size; - bool is_dir = (S_ISDIR(dvnode->netfs.inode.i_mode) && - !test_bit(AFS_VNODE_MOUNTPOINT, &dvnode->flags)); i_size = i_size_read(&dvnode->netfs.inode); - if (is_dir) { - if (i_size < AFS_DIR_BLOCK_SIZE) - return afs_bad(dvnode, afs_file_error_dir_small); - if (i_size > AFS_DIR_BLOCK_SIZE * 1024) { - trace_afs_file_error(dvnode, -EFBIG, afs_file_error_dir_big); - return -EFBIG; - } - } else { - if (i_size > AFSPATHMAX) { - trace_afs_file_error(dvnode, -EFBIG, afs_file_error_dir_big); - return -EFBIG; - } + if (i_size < AFS_DIR_BLOCK_SIZE) + return afs_bad(dvnode, afs_file_error_dir_small); + if (i_size > AFS_DIR_BLOCK_SIZE * 1024) { + trace_afs_file_error(dvnode, -EFBIG, afs_file_error_dir_big); + return -EFBIG; } /* Expand the storage. TODO: Shrink the storage too. */ @@ -277,24 +270,18 @@ static ssize_t afs_do_read_single(struct afs_vnode *dvnode, struct file *file) * buffer. */ ret = -ESTALE; - } else if (is_dir) { + } else { int ret2 = afs_dir_check(dvnode); if (ret2 < 0) ret = ret2; - } else if (i_size < folioq_folio_size(dvnode->directory, 0)) { - /* NUL-terminate a symlink. */ - char *symlink = kmap_local_folio(folioq_folio(dvnode->directory, 0), 0); - - symlink[i_size] = 0; - kunmap_local(symlink); } } return ret; } -ssize_t afs_read_single(struct afs_vnode *dvnode, struct file *file) +static ssize_t afs_read_single(struct afs_vnode *dvnode, struct file *file) { ssize_t ret; @@ -1763,13 +1750,20 @@ error: return ret; } +static void afs_symlink_put(struct afs_operation *op) +{ + kfree(op->create.symlink); + op->create.symlink = NULL; + afs_create_put(op); +} + static const struct afs_operation_ops afs_symlink_operation = { .issue_afs_rpc = afs_fs_symlink, .issue_yfs_rpc = yfs_fs_symlink, .success = afs_create_success, .aborted = afs_check_for_remote_deletion, .edit_dir = afs_create_edit_dir, - .put = afs_create_put, + .put = afs_symlink_put, }; /* @@ -1779,7 +1773,9 @@ static int afs_symlink(struct mnt_idmap *idmap, struct inode *dir, struct dentry *dentry, const char *content) { struct afs_operation *op; + struct afs_symlink *symlink; struct afs_vnode *dvnode = AFS_FS_I(dir); + size_t clen = strlen(content); int ret; _enter("{%llx:%llu},{%pd},%s", @@ -1791,12 +1787,20 @@ static int afs_symlink(struct mnt_idmap *idmap, struct inode *dir, goto error; ret = -EINVAL; - if (strlen(content) >= AFSPATHMAX) + if (clen >= AFSPATHMAX) + goto error; + + ret = -ENOMEM; + symlink = kmalloc_flex(struct afs_symlink, content, clen + 1, GFP_KERNEL); + if (!symlink) goto error; + refcount_set(&symlink->ref, 1); + memcpy(symlink->content, content, clen + 1); op = afs_alloc_operation(NULL, dvnode->volume); if (IS_ERR(op)) { ret = PTR_ERR(op); + kfree(symlink); goto error; } @@ -1808,7 +1812,7 @@ static int afs_symlink(struct mnt_idmap *idmap, struct inode *dir, op->dentry = dentry; op->ops = &afs_symlink_operation; op->create.reason = afs_edit_dir_for_symlink; - op->create.symlink = content; + op->create.symlink = symlink; op->mtime = current_time(dir); ret = afs_do_sync_operation(op); afs_dir_unuse_cookie(dvnode, ret); @@ -2192,15 +2196,13 @@ error: } /* - * Write the file contents to the cache as a single blob. + * Write the directory contents to the cache as a single blob. */ -int afs_single_writepages(struct address_space *mapping, - struct writeback_control *wbc) +static int afs_dir_writepages(struct address_space *mapping, + struct writeback_control *wbc) { struct afs_vnode *dvnode = AFS_FS_I(mapping->host); struct iov_iter iter; - bool is_dir = (S_ISDIR(dvnode->netfs.inode.i_mode) && - !test_bit(AFS_VNODE_MOUNTPOINT, &dvnode->flags)); int ret = 0; /* Need to lock to prevent the folio queue and folios from being thrown @@ -2215,9 +2217,7 @@ int afs_single_writepages(struct address_space *mapping, down_read(&dvnode->validate_lock); } - if (is_dir ? - test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags) : - atomic64_read(&dvnode->cb_expires_at) != AFS_NO_CB_PROMISE) { + if (test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags)) { iov_iter_folio_queue(&iter, ITER_SOURCE, dvnode->directory, 0, 0, i_size_read(&dvnode->netfs.inode)); ret = netfs_writeback_single(mapping, wbc, &iter); diff --git a/fs/afs/fsclient.c b/fs/afs/fsclient.c index 95494d5f2b8a..a2ffd60889f8 100644 --- a/fs/afs/fsclient.c +++ b/fs/afs/fsclient.c @@ -886,7 +886,7 @@ void afs_fs_symlink(struct afs_operation *op) namesz = name->len; padsz = (4 - (namesz & 3)) & 3; - c_namesz = strlen(op->create.symlink); + c_namesz = strlen(op->create.symlink->content); c_padsz = (4 - (c_namesz & 3)) & 3; reqsz = (6 * 4) + namesz + padsz + c_namesz + c_padsz + (6 * 4); @@ -910,7 +910,7 @@ void afs_fs_symlink(struct afs_operation *op) bp = (void *) bp + padsz; } *bp++ = htonl(c_namesz); - memcpy(bp, op->create.symlink, c_namesz); + memcpy(bp, op->create.symlink->content, c_namesz); bp = (void *) bp + c_namesz; if (c_padsz > 0) { memset(bp, 0, c_padsz); diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 19fe2e392885..3f48458694ba 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -25,96 +25,6 @@ #include "internal.h" #include "afs_fs.h" -void afs_init_new_symlink(struct afs_vnode *vnode, struct afs_operation *op) -{ - size_t size = strlen(op->create.symlink) + 1; - size_t dsize = 0; - char *p; - - if (netfs_alloc_folioq_buffer(NULL, &vnode->directory, &dsize, size, - mapping_gfp_mask(vnode->netfs.inode.i_mapping)) < 0) - return; - - vnode->directory_size = dsize; - p = kmap_local_folio(folioq_folio(vnode->directory, 0), 0); - memcpy(p, op->create.symlink, size); - kunmap_local(p); - set_bit(AFS_VNODE_DIR_READ, &vnode->flags); - netfs_single_mark_inode_dirty(&vnode->netfs.inode); -} - -static void afs_put_link(void *arg) -{ - struct folio *folio = virt_to_folio(arg); - - kunmap_local(arg); - folio_put(folio); -} - -const char *afs_get_link(struct dentry *dentry, struct inode *inode, - struct delayed_call *callback) -{ - struct afs_vnode *vnode = AFS_FS_I(inode); - struct folio *folio; - char *content; - ssize_t ret; - - if (!dentry) { - /* RCU pathwalk. */ - if (!test_bit(AFS_VNODE_DIR_READ, &vnode->flags) || !afs_check_validity(vnode)) - return ERR_PTR(-ECHILD); - goto good; - } - - if (test_bit(AFS_VNODE_DIR_READ, &vnode->flags)) - goto fetch; - - ret = afs_validate(vnode, NULL); - if (ret < 0) - return ERR_PTR(ret); - - if (!test_and_clear_bit(AFS_VNODE_ZAP_DATA, &vnode->flags) && - test_bit(AFS_VNODE_DIR_READ, &vnode->flags)) - goto good; - -fetch: - ret = afs_read_single(vnode, NULL); - if (ret < 0) - return ERR_PTR(ret); - set_bit(AFS_VNODE_DIR_READ, &vnode->flags); - -good: - folio = folioq_folio(vnode->directory, 0); - folio_get(folio); - content = kmap_local_folio(folio, 0); - set_delayed_call(callback, afs_put_link, content); - return content; -} - -int afs_readlink(struct dentry *dentry, char __user *buffer, int buflen) -{ - DEFINE_DELAYED_CALL(done); - const char *content; - int len; - - content = afs_get_link(dentry, d_inode(dentry), &done); - if (IS_ERR(content)) { - do_delayed_call(&done); - return PTR_ERR(content); - } - - len = umin(strlen(content), buflen); - if (copy_to_user(buffer, content, len)) - len = -EFAULT; - do_delayed_call(&done); - return len; -} - -static const struct inode_operations afs_symlink_inode_operations = { - .get_link = afs_get_link, - .readlink = afs_readlink, -}; - static noinline void dump_vnode(struct afs_vnode *vnode, struct afs_vnode *parent_vnode) { static unsigned long once_only; @@ -214,7 +124,7 @@ static int afs_inode_init_from_status(struct afs_operation *op, inode->i_mode = S_IFLNK | status->mode; inode->i_op = &afs_symlink_inode_operations; } - inode->i_mapping->a_ops = &afs_dir_aops; + inode->i_mapping->a_ops = &afs_symlink_aops; inode_nohighmem(inode); mapping_set_release_always(inode->i_mapping); break; @@ -769,12 +679,14 @@ void afs_evict_inode(struct inode *inode) .range_end = LLONG_MAX, }; - afs_single_writepages(inode->i_mapping, &wbc); + inode->i_mapping->a_ops->writepages(inode->i_mapping, &wbc); } netfs_wait_for_outstanding_io(inode); truncate_inode_pages_final(&inode->i_data); netfs_free_folioq_buffer(vnode->directory); + if (vnode->symlink) + afs_evict_symlink(vnode); afs_set_cache_aux(vnode, &aux); netfs_clear_inode_writeback(inode, &aux); diff --git a/fs/afs/internal.h b/fs/afs/internal.h index 816dc848ea71..0b72a8566299 100644 --- a/fs/afs/internal.h +++ b/fs/afs/internal.h @@ -710,6 +710,7 @@ struct afs_vnode { #define AFS_VNODE_DIR_READ 11 /* Set if we've read a dir's contents */ struct folio_queue *directory; /* Directory contents */ + struct afs_symlink __rcu *symlink; /* Symlink content */ struct list_head wb_keys; /* List of keys available for writeback */ struct list_head pending_locks; /* locks waiting to be granted */ struct list_head granted_locks; /* locks granted on this file */ @@ -776,6 +777,15 @@ struct afs_permits { struct afs_permit permits[] __counted_by(nr_permits); /* List of permits sorted by key pointer */ }; +/* + * Copy of symlink content for normal use. + */ +struct afs_symlink { + struct rcu_head rcu; + refcount_t ref; + char content[]; +}; + /* * Error prioritisation and accumulation. */ @@ -887,7 +897,7 @@ struct afs_operation { struct { int reason; /* enum afs_edit_dir_reason */ mode_t mode; - const char *symlink; + struct afs_symlink *symlink; } create; struct { bool need_rehash; @@ -1098,13 +1108,10 @@ extern const struct inode_operations afs_dir_inode_operations; extern const struct address_space_operations afs_dir_aops; extern const struct dentry_operations afs_fs_dentry_operations; -ssize_t afs_read_single(struct afs_vnode *dvnode, struct file *file); ssize_t afs_read_dir(struct afs_vnode *dvnode, struct file *file) __acquires(&dvnode->validate_lock); extern void afs_d_release(struct dentry *); extern void afs_check_for_remote_deletion(struct afs_operation *); -int afs_single_writepages(struct address_space *mapping, - struct writeback_control *wbc); /* * dir_edit.c @@ -1247,10 +1254,6 @@ extern void afs_fs_probe_cleanup(struct afs_net *); */ extern const struct afs_operation_ops afs_fetch_status_operation; -void afs_init_new_symlink(struct afs_vnode *vnode, struct afs_operation *op); -const char *afs_get_link(struct dentry *dentry, struct inode *inode, - struct delayed_call *callback); -int afs_readlink(struct dentry *dentry, char __user *buffer, int buflen); extern void afs_vnode_commit_status(struct afs_operation *, struct afs_vnode_param *); extern int afs_fetch_status(struct afs_vnode *, struct key *, bool, afs_access_t *); extern int afs_ilookup5_test_by_fid(struct inode *, void *); @@ -1600,6 +1603,21 @@ void afs_detach_volume_from_servers(struct afs_volume *volume, struct afs_server extern int __init afs_fs_init(void); extern void afs_fs_exit(void); +/* + * symlink.c + */ +extern const struct inode_operations afs_symlink_inode_operations; +extern const struct address_space_operations afs_symlink_aops; + +void afs_invalidate_symlink(struct afs_vnode *vnode); +void afs_evict_symlink(struct afs_vnode *vnode); +void afs_init_new_symlink(struct afs_vnode *vnode, struct afs_operation *op); +const char *afs_get_link(struct dentry *dentry, struct inode *inode, + struct delayed_call *callback); +int afs_readlink(struct dentry *dentry, char __user *buffer, int buflen); +int afs_symlink_writepages(struct address_space *mapping, + struct writeback_control *wbc); + /* * validation.c */ diff --git a/fs/afs/symlink.c b/fs/afs/symlink.c new file mode 100644 index 000000000000..ed5868369f37 --- /dev/null +++ b/fs/afs/symlink.c @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* AFS filesystem symbolic link handling + * + * Copyright (C) 2026 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + */ + +#include +#include +#include +#include +#include +#include "internal.h" + +static void afs_put_symlink(struct afs_symlink *symlink) +{ + if (refcount_dec_and_test(&symlink->ref)) + kfree_rcu(symlink, rcu); +} + +static void afs_replace_symlink(struct afs_vnode *vnode, struct afs_symlink *symlink) +{ + struct afs_symlink *old; + + old = rcu_replace_pointer(vnode->symlink, symlink, + lockdep_is_held(&vnode->validate_lock)); + if (old) + afs_put_symlink(old); +} + +/* + * In the event that a third-party update of a symlink occurs, dispose of the + * copy of the old contents. Called under ->validate_lock. + */ +void afs_invalidate_symlink(struct afs_vnode *vnode) +{ + afs_replace_symlink(vnode, NULL); +} + +/* + * Dispose of a symlink copy during inode deletion. + */ +void afs_evict_symlink(struct afs_vnode *vnode) +{ + struct afs_symlink *old; + + old = rcu_replace_pointer(vnode->symlink, NULL, true); + if (old) + afs_put_symlink(old); + +} + +/* + * Set up a locally created symlink inode for immediate write to the cache. + */ +void afs_init_new_symlink(struct afs_vnode *vnode, struct afs_operation *op) +{ + struct afs_symlink *symlink = op->create.symlink; + size_t dsize = 0; + size_t size = strlen(symlink->content) + 1; + char *p; + + rcu_assign_pointer(vnode->symlink, symlink); + op->create.symlink = NULL; + + if (!fscache_cookie_enabled(netfs_i_cookie(&vnode->netfs))) + return; + + if (netfs_alloc_folioq_buffer(NULL, &vnode->directory, &dsize, size, + mapping_gfp_mask(vnode->netfs.inode.i_mapping)) < 0) + return; + + vnode->directory_size = dsize; + p = kmap_local_folio(folioq_folio(vnode->directory, 0), 0); + memcpy(p, symlink->content, size); + kunmap_local(p); + netfs_single_mark_inode_dirty(&vnode->netfs.inode); +} + +/* + * Read a symlink in a single download. + */ +static ssize_t afs_do_read_symlink(struct afs_vnode *vnode) +{ + struct afs_symlink *symlink; + struct iov_iter iter; + ssize_t ret; + loff_t i_size; + + i_size = i_size_read(&vnode->netfs.inode); + if (i_size > PAGE_SIZE - 1) { + trace_afs_file_error(vnode, -EFBIG, afs_file_error_dir_big); + return -EFBIG; + } + + if (!vnode->directory) { + size_t cur_size = 0; + + ret = netfs_alloc_folioq_buffer(NULL, + &vnode->directory, &cur_size, PAGE_SIZE, + mapping_gfp_mask(vnode->netfs.inode.i_mapping)); + vnode->directory_size = PAGE_SIZE - 1; + if (ret < 0) + return ret; + } + + iov_iter_folio_queue(&iter, ITER_DEST, vnode->directory, 0, 0, PAGE_SIZE); + + /* AFS requires us to perform the read of a symlink as a single unit to + * avoid issues with the content being changed between reads. + */ + ret = netfs_read_single(&vnode->netfs.inode, NULL, &iter); + if (ret >= 0) { + i_size = ret; + if (i_size > PAGE_SIZE - 1) { + trace_afs_file_error(vnode, -EFBIG, afs_file_error_dir_big); + return -EFBIG; + } + vnode->directory_size = i_size; + + /* Copy the symlink. */ + symlink = kmalloc_flex(struct afs_symlink, content, i_size + 1, + GFP_KERNEL); + if (!symlink) + return -ENOMEM; + + refcount_set(&symlink->ref, 1); + symlink->content[i_size] = 0; + + const char *s = kmap_local_folio(folioq_folio(vnode->directory, 0), 0); + + memcpy(symlink->content, s, i_size); + kunmap_local(s); + + afs_replace_symlink(vnode, symlink); + } + + if (!fscache_cookie_enabled(netfs_i_cookie(&vnode->netfs))) { + netfs_free_folioq_buffer(vnode->directory); + vnode->directory = NULL; + vnode->directory_size = 0; + } + + return ret; +} + +static ssize_t afs_read_symlink(struct afs_vnode *vnode) +{ + ssize_t ret; + + fscache_use_cookie(afs_vnode_cache(vnode), false); + ret = afs_do_read_symlink(vnode); + fscache_unuse_cookie(afs_vnode_cache(vnode), NULL, NULL); + return ret; +} + +static void afs_put_link(void *arg) +{ + afs_put_symlink(arg); +} + +const char *afs_get_link(struct dentry *dentry, struct inode *inode, + struct delayed_call *callback) +{ + struct afs_symlink *symlink; + struct afs_vnode *vnode = AFS_FS_I(inode); + ssize_t ret; + + if (!dentry) { + /* RCU pathwalk. */ + symlink = rcu_dereference(vnode->symlink); + if (!symlink || !afs_check_validity(vnode)) + return ERR_PTR(-ECHILD); + set_delayed_call(callback, NULL, NULL); + return symlink->content; + } + + if (vnode->symlink) { + ret = afs_validate(vnode, NULL); + if (ret < 0) + return ERR_PTR(ret); + + down_read(&vnode->validate_lock); + if (vnode->symlink) + goto good; + up_read(&vnode->validate_lock); + } + + if (down_write_killable(&vnode->validate_lock) < 0) + return ERR_PTR(-ERESTARTSYS); + if (!vnode->symlink) { + ret = afs_read_symlink(vnode); + if (ret < 0) { + up_write(&vnode->validate_lock); + return ERR_PTR(ret); + } + } + + downgrade_write(&vnode->validate_lock); + +good: + symlink = rcu_dereference_protected(vnode->symlink, + lockdep_is_held(&vnode->validate_lock)); + refcount_inc(&symlink->ref); + up_read(&vnode->validate_lock); + + set_delayed_call(callback, afs_put_link, symlink); + return symlink->content; +} + +int afs_readlink(struct dentry *dentry, char __user *buffer, int buflen) +{ + DEFINE_DELAYED_CALL(done); + const char *content; + int len; + + content = afs_get_link(dentry, d_inode(dentry), &done); + if (IS_ERR(content)) { + do_delayed_call(&done); + return PTR_ERR(content); + } + + len = umin(strlen(content), buflen); + if (copy_to_user(buffer, content, len)) + len = -EFAULT; + do_delayed_call(&done); + return len; +} + +/* + * Write the symlink contents to the cache as a single blob. We then throw + * away the page we used to receive it. + */ +int afs_symlink_writepages(struct address_space *mapping, + struct writeback_control *wbc) +{ + struct afs_vnode *vnode = AFS_FS_I(mapping->host); + struct iov_iter iter; + int ret = 0; + + if (!down_read_trylock(&vnode->validate_lock)) { + if (wbc->sync_mode == WB_SYNC_NONE) { + /* The VFS will have undirtied the inode. */ + netfs_single_mark_inode_dirty(&vnode->netfs.inode); + return 0; + } + down_read(&vnode->validate_lock); + } + + if (vnode->directory && + atomic64_read(&vnode->cb_expires_at) != AFS_NO_CB_PROMISE) { + iov_iter_folio_queue(&iter, ITER_SOURCE, vnode->directory, 0, 0, + i_size_read(&vnode->netfs.inode)); + ret = netfs_writeback_single(mapping, wbc, &iter); + } + + if (ret == 0) { + mutex_lock(&vnode->netfs.wb_lock); + netfs_free_folioq_buffer(vnode->directory); + vnode->directory = NULL; + vnode->directory_size = 0; + mutex_unlock(&vnode->netfs.wb_lock); + } else if (ret == 1) { + ret = 0; /* Skipped write due to lock conflict. */ + } + + up_read(&vnode->validate_lock); + return ret; +} + +const struct inode_operations afs_symlink_inode_operations = { + .get_link = afs_get_link, + .readlink = afs_readlink, +}; + +const struct address_space_operations afs_symlink_aops = { + .writepages = afs_symlink_writepages, +}; diff --git a/fs/afs/validation.c b/fs/afs/validation.c index 0ba8336c9025..e997563af658 100644 --- a/fs/afs/validation.c +++ b/fs/afs/validation.c @@ -465,11 +465,17 @@ int afs_validate(struct afs_vnode *vnode, struct key *key) vnode->cb_ro_snapshot = cb_ro_snapshot; vnode->cb_scrub = cb_scrub; - /* if the vnode's data version number changed then its contents are - * different */ + /* If the vnode's data version number changed then its contents are + * different. Note that afs_apply_status() doesn't set ZAP_DATA on + * directories. + */ zap |= test_and_clear_bit(AFS_VNODE_ZAP_DATA, &vnode->flags); - if (zap) - afs_zap_data(vnode); + if (zap) { + if (S_ISREG(vnode->netfs.inode.i_mode)) + afs_zap_data(vnode); + else if (S_ISLNK(vnode->netfs.inode.i_mode)) + afs_invalidate_symlink(vnode); + } up_write(&vnode->validate_lock); _leave(" = 0"); return 0; diff --git a/fs/afs/yfsclient.c b/fs/afs/yfsclient.c index 24fb562ebd33..d941179730a9 100644 --- a/fs/afs/yfsclient.c +++ b/fs/afs/yfsclient.c @@ -960,7 +960,7 @@ void yfs_fs_symlink(struct afs_operation *op) _enter(""); - contents_sz = strlen(op->create.symlink); + contents_sz = strlen(op->create.symlink->content); call = afs_alloc_flat_call(op->net, &yfs_RXYFSSymlink, sizeof(__be32) + sizeof(struct yfs_xdr_RPCFlags) + @@ -981,7 +981,7 @@ void yfs_fs_symlink(struct afs_operation *op) bp = xdr_encode_u32(bp, 0); /* RPC flags */ bp = xdr_encode_YFSFid(bp, &dvp->fid); bp = xdr_encode_name(bp, name); - bp = xdr_encode_string(bp, op->create.symlink, contents_sz); + bp = xdr_encode_string(bp, op->create.symlink->content, contents_sz); bp = xdr_encode_YFSStoreStatus(bp, &mode, &op->mtime); yfs_check_req(call, bp); -- cgit v1.2.3 From 5e121a81667a83e9a01d62b429e340f5a4a84abc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 12 May 2026 09:48:49 +0200 Subject: spi: ep93xx: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: e79e7c2df627 ("spi: ep93xx: add DT support for Cirrus EP93xx") Link: https://sashiko.dev/#/patchset/20260429091333.165363-1-johan%40kernel.org?part=10 Cc: stable@vger.kernel.org # 6.12 Cc: Nikita Shubin Signed-off-by: Johan Hovold Acked-by: Nikita Shubin Link: https://patch.msgid.link/20260512074849.915143-1-johan@kernel.org Signed-off-by: Mark Brown --- drivers/spi/spi-ep93xx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index db50018050e5..f716c9607be4 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -582,12 +582,14 @@ static int ep93xx_spi_setup_dma(struct device *dev, struct ep93xx_spi *espi) espi->dma_rx = dma_request_chan(dev, "rx"); if (IS_ERR(espi->dma_rx)) { ret = dev_err_probe(dev, PTR_ERR(espi->dma_rx), "rx DMA setup failed"); + espi->dma_rx = NULL; goto fail_free_page; } espi->dma_tx = dma_request_chan(dev, "tx"); if (IS_ERR(espi->dma_tx)) { ret = dev_err_probe(dev, PTR_ERR(espi->dma_tx), "tx DMA setup failed"); + espi->dma_tx = NULL; goto fail_release_rx; } -- cgit v1.2.3 From 55dda532bbc261aef495e403c8900c5e2ab5fa34 Mon Sep 17 00:00:00 2001 From: Nicolas Escande Date: Wed, 6 May 2026 15:42:38 +0200 Subject: wifi: ath11k: fix error path leaks in some WMI WOW calls Fix two instances where we used to directly return the result of ath11k_wmi_cmd_send(...). Because we did not check the return value, we also did not free the skb in the error path. Fixes: 79802b13a492 ("ath11k: implement WoW enable and wakeup commands") Signed-off-by: Nicolas Escande Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260506134240.2284016-2-nico.escande@gmail.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath11k/wmi.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c index 40747fba3b0c..024c2aad9fb4 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.c +++ b/drivers/net/wireless/ath/ath11k/wmi.c @@ -9332,6 +9332,7 @@ int ath11k_wmi_wow_host_wakeup_ind(struct ath11k *ar) struct wmi_wow_host_wakeup_ind *cmd; struct sk_buff *skb; size_t len; + int ret; len = sizeof(*cmd); skb = ath11k_wmi_alloc_skb(ar->wmi->wmi_ab, len); @@ -9345,14 +9346,20 @@ int ath11k_wmi_wow_host_wakeup_ind(struct ath11k *ar) ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "tlv wow host wakeup ind\n"); - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_wow_enable(struct ath11k *ar) { struct wmi_wow_enable_cmd *cmd; struct sk_buff *skb; - int len; + int ret, len; len = sizeof(*cmd); skb = ath11k_wmi_alloc_skb(ar->wmi->wmi_ab, len); @@ -9367,7 +9374,13 @@ int ath11k_wmi_wow_enable(struct ath11k *ar) cmd->pause_iface_config = WOW_IFACE_PAUSE_ENABLED; ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "tlv wow enable\n"); - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_WOW_ENABLE_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_WOW_ENABLE_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_WOW_ENABLE_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_scan_prob_req_oui(struct ath11k *ar, -- cgit v1.2.3 From ebad0b48996fd4919c36bbcb07289d37d046de74 Mon Sep 17 00:00:00 2001 From: Nicolas Escande Date: Wed, 6 May 2026 15:42:39 +0200 Subject: wifi: ath11k: fix error path leaks in some WMI calls This is the same pattern that was previously identified as problematic: direct 'return ath11k_wmi_cmd_send(...)' will leak the skb in the error path if it is not explicitly handled. Fixes: c417b247ba04 ("ath11k: implement hardware data filter") Fixes: 9cbd7fc9be82 ("ath11k: support MAC address randomization in scan") Fixes: ba9177fcef21 ("ath11k: Add basic WoW functionalities") Fixes: fec4b898f369 ("ath11k: Add WoW net-detect functionality") Fixes: c3c36bfe998b ("ath11k: support ARP and NS offload") Fixes: a16d9b50cfba ("ath11k: support GTK rekey offload") Fixes: 652f69ed9c1b ("ath11k: Add support for SAR") Fixes: 0f84a156aa3b ("ath11k: Handle keepalive during WoWLAN suspend and resume") Signed-off-by: Nicolas Escande Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260506134240.2284016-3-nico.escande@gmail.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath11k/wmi.c | 112 +++++++++++++++++++++++++++++----- 1 file changed, 96 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c index 024c2aad9fb4..dca6e011cc40 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.c +++ b/drivers/net/wireless/ath/ath11k/wmi.c @@ -9299,7 +9299,7 @@ int ath11k_wmi_hw_data_filter_cmd(struct ath11k *ar, u32 vdev_id, { struct wmi_hw_data_filter_cmd *cmd; struct sk_buff *skb; - int len; + int ret, len; len = sizeof(*cmd); skb = ath11k_wmi_alloc_skb(ar->wmi->wmi_ab, len); @@ -9324,7 +9324,13 @@ int ath11k_wmi_hw_data_filter_cmd(struct ath11k *ar, u32 vdev_id, "hw data filter enable %d filter_bitmap 0x%x\n", enable, filter_bitmap); - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_HW_DATA_FILTER_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_HW_DATA_FILTER_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_HW_DATA_FILTER_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_wow_host_wakeup_ind(struct ath11k *ar) @@ -9389,7 +9395,7 @@ int ath11k_wmi_scan_prob_req_oui(struct ath11k *ar, struct sk_buff *skb; struct wmi_scan_prob_req_oui_cmd *cmd; u32 prob_req_oui; - int len; + int ret, len; prob_req_oui = (((u32)mac_addr[0]) << 16) | (((u32)mac_addr[1]) << 8) | mac_addr[2]; @@ -9408,7 +9414,13 @@ int ath11k_wmi_scan_prob_req_oui(struct ath11k *ar, ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "scan prob req oui %d\n", prob_req_oui); - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_SCAN_PROB_REQ_OUI_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_SCAN_PROB_REQ_OUI_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_SCAN_PROB_REQ_OUI_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_wow_add_wakeup_event(struct ath11k *ar, u32 vdev_id, @@ -9418,6 +9430,7 @@ int ath11k_wmi_wow_add_wakeup_event(struct ath11k *ar, u32 vdev_id, struct wmi_wow_add_del_event_cmd *cmd; struct sk_buff *skb; size_t len; + int ret; len = sizeof(*cmd); skb = ath11k_wmi_alloc_skb(ar->wmi->wmi_ab, len); @@ -9435,7 +9448,13 @@ int ath11k_wmi_wow_add_wakeup_event(struct ath11k *ar, u32 vdev_id, ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "tlv wow add wakeup event %s enable %d vdev_id %d\n", wow_wakeup_event(event), enable, vdev_id); - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_wow_add_pattern(struct ath11k *ar, u32 vdev_id, u32 pattern_id, @@ -9448,6 +9467,7 @@ int ath11k_wmi_wow_add_pattern(struct ath11k *ar, u32 vdev_id, u32 pattern_id, struct sk_buff *skb; u8 *ptr; size_t len; + int ret; len = sizeof(*cmd) + sizeof(*tlv) + /* array struct */ @@ -9540,7 +9560,13 @@ int ath11k_wmi_wow_add_pattern(struct ath11k *ar, u32 vdev_id, u32 pattern_id, ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "tlv wow add pattern vdev_id %d pattern_id %d pattern_offset %d\n", vdev_id, pattern_id, pattern_offset); - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_WOW_ADD_WAKE_PATTERN_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_WOW_ADD_WAKE_PATTERN_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_WOW_ADD_WAKE_PATTERN_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_wow_del_pattern(struct ath11k *ar, u32 vdev_id, u32 pattern_id) @@ -9548,6 +9574,7 @@ int ath11k_wmi_wow_del_pattern(struct ath11k *ar, u32 vdev_id, u32 pattern_id) struct wmi_wow_del_pattern_cmd *cmd; struct sk_buff *skb; size_t len; + int ret; len = sizeof(*cmd); skb = ath11k_wmi_alloc_skb(ar->wmi->wmi_ab, len); @@ -9566,7 +9593,13 @@ int ath11k_wmi_wow_del_pattern(struct ath11k *ar, u32 vdev_id, u32 pattern_id) ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "tlv wow del pattern vdev_id %d pattern_id %d\n", vdev_id, pattern_id); - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_WOW_DEL_WAKE_PATTERN_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_WOW_DEL_WAKE_PATTERN_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_WOW_DEL_WAKE_PATTERN_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } static struct sk_buff * @@ -9710,6 +9743,7 @@ int ath11k_wmi_wow_config_pno(struct ath11k *ar, u32 vdev_id, struct wmi_pno_scan_req *pno_scan) { struct sk_buff *skb; + int ret; if (pno_scan->enable) skb = ath11k_wmi_op_gen_config_pno_start(ar, vdev_id, pno_scan); @@ -9719,7 +9753,13 @@ int ath11k_wmi_wow_config_pno(struct ath11k *ar, u32 vdev_id, if (IS_ERR_OR_NULL(skb)) return -ENOMEM; - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } static void ath11k_wmi_fill_ns_offload(struct ath11k *ar, @@ -9837,6 +9877,7 @@ int ath11k_wmi_arp_ns_offload(struct ath11k *ar, u8 *buf_ptr; size_t len; u8 ns_cnt, ns_ext_tuples = 0; + int ret; offload = &arvif->arp_ns_offload; ns_cnt = offload->ipv6_count; @@ -9875,7 +9916,13 @@ int ath11k_wmi_arp_ns_offload(struct ath11k *ar, if (ns_ext_tuples) ath11k_wmi_fill_ns_offload(ar, offload, &buf_ptr, enable, 1); - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_SET_ARP_NS_OFFLOAD_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_SET_ARP_NS_OFFLOAD_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_SET_ARP_NS_OFFLOAD_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_gtk_rekey_offload(struct ath11k *ar, @@ -9883,7 +9930,7 @@ int ath11k_wmi_gtk_rekey_offload(struct ath11k *ar, { struct wmi_gtk_rekey_offload_cmd *cmd; struct ath11k_rekey_data *rekey_data = &arvif->rekey_data; - int len; + int ret, len; struct sk_buff *skb; __le64 replay_ctr; @@ -9917,14 +9964,20 @@ int ath11k_wmi_gtk_rekey_offload(struct ath11k *ar, ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "offload gtk rekey vdev: %d %d\n", arvif->vdev_id, enable); - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_GTK_OFFLOAD_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_GTK_OFFLOAD_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_GTK_OFFLOAD_CMDID offload\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_gtk_rekey_getinfo(struct ath11k *ar, struct ath11k_vif *arvif) { struct wmi_gtk_rekey_offload_cmd *cmd; - int len; + int ret, len; struct sk_buff *skb; len = sizeof(*cmd); @@ -9941,7 +9994,13 @@ int ath11k_wmi_gtk_rekey_getinfo(struct ath11k *ar, ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "get gtk rekey vdev_id: %d\n", arvif->vdev_id); - return ath11k_wmi_cmd_send(ar->wmi, skb, WMI_GTK_OFFLOAD_CMDID); + ret = ath11k_wmi_cmd_send(ar->wmi, skb, WMI_GTK_OFFLOAD_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_GTK_OFFLOAD_CMDID getinfo\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_pdev_set_bios_sar_table_param(struct ath11k *ar, const u8 *sar_val) @@ -9951,6 +10010,7 @@ int ath11k_wmi_pdev_set_bios_sar_table_param(struct ath11k *ar, const u8 *sar_va struct sk_buff *skb; u8 *buf_ptr; u32 len, sar_len_aligned, rsvd_len_aligned; + int ret; sar_len_aligned = roundup(BIOS_SAR_TABLE_LEN, sizeof(u32)); rsvd_len_aligned = roundup(BIOS_SAR_RSVD1_LEN, sizeof(u32)); @@ -9981,7 +10041,13 @@ int ath11k_wmi_pdev_set_bios_sar_table_param(struct ath11k *ar, const u8 *sar_va tlv->header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ARRAY_BYTE) | FIELD_PREP(WMI_TLV_LEN, rsvd_len_aligned); - return ath11k_wmi_cmd_send(wmi, skb, WMI_PDEV_SET_BIOS_SAR_TABLE_CMDID); + ret = ath11k_wmi_cmd_send(wmi, skb, WMI_PDEV_SET_BIOS_SAR_TABLE_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_PDEV_SET_BIOS_SAR_TABLE_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_pdev_set_bios_geo_table_param(struct ath11k *ar) @@ -9992,6 +10058,7 @@ int ath11k_wmi_pdev_set_bios_geo_table_param(struct ath11k *ar) struct sk_buff *skb; u8 *buf_ptr; u32 len, rsvd_len_aligned; + int ret; rsvd_len_aligned = roundup(BIOS_SAR_RSVD2_LEN, sizeof(u32)); len = sizeof(*cmd) + TLV_HDR_SIZE + rsvd_len_aligned; @@ -10011,7 +10078,13 @@ int ath11k_wmi_pdev_set_bios_geo_table_param(struct ath11k *ar) tlv->header = FIELD_PREP(WMI_TLV_TAG, WMI_TAG_ARRAY_BYTE) | FIELD_PREP(WMI_TLV_LEN, rsvd_len_aligned); - return ath11k_wmi_cmd_send(wmi, skb, WMI_PDEV_SET_BIOS_GEO_TABLE_CMDID); + ret = ath11k_wmi_cmd_send(wmi, skb, WMI_PDEV_SET_BIOS_GEO_TABLE_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_PDEV_SET_BIOS_GEO_TABLE_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } int ath11k_wmi_sta_keepalive(struct ath11k *ar, @@ -10022,6 +10095,7 @@ int ath11k_wmi_sta_keepalive(struct ath11k *ar, struct wmi_sta_keepalive_arp_resp *arp; struct sk_buff *skb; size_t len; + int ret; len = sizeof(*cmd) + sizeof(*arp); skb = ath11k_wmi_alloc_skb(wmi->wmi_ab, len); @@ -10053,7 +10127,13 @@ int ath11k_wmi_sta_keepalive(struct ath11k *ar, "sta keepalive vdev %d enabled %d method %d interval %d\n", arg->vdev_id, arg->enabled, arg->method, arg->interval); - return ath11k_wmi_cmd_send(wmi, skb, WMI_STA_KEEPALIVE_CMDID); + ret = ath11k_wmi_cmd_send(wmi, skb, WMI_STA_KEEPALIVE_CMDID); + if (ret) { + ath11k_warn(ar->ab, "failed to send WMI_STA_KEEPALIVE_CMDID\n"); + dev_kfree_skb(skb); + } + + return ret; } bool ath11k_wmi_supports_6ghz_cc_ext(struct ath11k *ar) -- cgit v1.2.3 From 7320d6eb861e9913193a7801834c661381756a79 Mon Sep 17 00:00:00 2001 From: Nicolas Escande Date: Wed, 6 May 2026 15:42:40 +0200 Subject: wifi: ath11k: fix error path leak in ath11k_tm_cmd_wmi_ftm() This is similar to what was fixed by previous patches. We have a call to ath11k_wmi_cmd_send() which does check the return value, but forgot to free the related skb on error. Fixes: b43310e44edc ("wifi: ath11k: factory test mode support") Signed-off-by: Nicolas Escande Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260506134240.2284016-4-nico.escande@gmail.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath11k/testmode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath11k/testmode.c b/drivers/net/wireless/ath/ath11k/testmode.c index a9751ea2a0b7..c72eed358f6d 100644 --- a/drivers/net/wireless/ath/ath11k/testmode.c +++ b/drivers/net/wireless/ath/ath11k/testmode.c @@ -457,6 +457,7 @@ static int ath11k_tm_cmd_wmi_ftm(struct ath11k *ar, struct nlattr *tb[]) ret = ath11k_wmi_cmd_send(wmi, skb, cmd_id); if (ret) { ath11k_warn(ar->ab, "failed to send wmi ftm command: %d\n", ret); + dev_kfree_skb(skb); goto out; } -- cgit v1.2.3 From 54a5b38e4396530e5b2f12b54d3844e860ab6784 Mon Sep 17 00:00:00 2001 From: Kang Yang Date: Tue, 28 Apr 2026 14:17:37 +0800 Subject: wifi: ath10k: skip WMI and beacon transmission when device is wedged In ath10k_wmi_cmd_send(), the current code detects ATH10K_STATE_WEDGED and sets ret to -ESHUTDOWN, but still proceeds to transmit pending beacons and calls ath10k_wmi_cmd_send_nowait(). This can lead to incorrect behavior, as WMI commands and beacons are still sent after the device has been marked as wedged, and the original -ESHUTDOWN return value may be overwritten by the result of the send path. The wedged state indicates the hardware is already unreliable, and no further interaction with firmware is expected or meaningful in this state. Fix this by skipping beacon transmission and the WMI send path entirely once ATH10K_STATE_WEDGED is detected, ensuring consistent return values and avoiding unnecessary firmware interaction. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1 Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189 Fixes: c256a94d1b1b ("wifi: ath10k: shutdown driver when hardware is unreliable") Signed-off-by: Kang Yang Reviewed-by: Rameshkumar Sundaram Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260428061737.37-1-kang.yang@oss.qualcomm.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath10k/wmi.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 0bdb38edd915..e57588c19c80 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -3,7 +3,6 @@ * Copyright (c) 2005-2011 Atheros Communications Inc. * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. - * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved. * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ @@ -1947,15 +1946,15 @@ int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id) ret = -ESHUTDOWN; ath10k_dbg(ar, ATH10K_DBG_WMI, "drop wmi command %d, hardware is wedged\n", cmd_id); - } - /* try to send pending beacons first. they take priority */ - ath10k_wmi_tx_beacons_nowait(ar); + } else { + /* try to send pending beacons first. they take priority */ + ath10k_wmi_tx_beacons_nowait(ar); - ret = ath10k_wmi_cmd_send_nowait(ar, skb, cmd_id); - - if (ret && test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) - ret = -ESHUTDOWN; + ret = ath10k_wmi_cmd_send_nowait(ar, skb, cmd_id); + if (ret && test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) + ret = -ESHUTDOWN; + } (ret != -EAGAIN); }), 3 * HZ); -- cgit v1.2.3 From 3812a9e84265a5cdd90d29fe8d97a023e91fb945 Mon Sep 17 00:00:00 2001 From: Hardik Prakash Date: Tue, 12 May 2026 13:01:38 +0530 Subject: pinctrl-amd: enable IRQ for WACF2200 touchscreen on Lenovo Yoga 7 14AGP11 On Lenovo Yoga 7 14AGP11 (83TD), the WACF2200 touchscreen controller is wired via I2C2 (AMDI0010:02) with its interrupt on GPIO pin 157 (confirmed via ACPI _CRS GpioInt decode). After amd_gpio_irq_init() clears all GPIO interrupts at boot, pin 157 is never re-enabled, preventing the touchscreen from signalling the driver. Windows keeps GPIO 157 INTERRUPT_ENABLE (bit 11) and INTERRUPT_MASK (bit 12) set after initialisation. Add a DMI quirk to restore these bits after amd_gpio_irq_init() on this hardware. Assisted-by: Claude:claude-sonnet-4-6 Assisted-by: GPT-Codex:gpt-5.2-codex Signed-off-by: Hardik Prakash Acked-by: Andy Shevchenko Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index e3128b0045d2..64315b0edf2a 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -39,6 +40,39 @@ static struct amd_gpio *pinctrl_dev; #endif +static const struct dmi_system_id amd_gpio_quirk_yoga7_14agp11[] = { + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "83TD"), + DMI_MATCH(DMI_BOARD_NAME, "LNVNB161216"), + }, + }, + { } +}; + +static void amd_gpio_apply_quirks(struct amd_gpio *gpio_dev) +{ + const unsigned int pin = 157; /* WACF2200 GpioInt per ACPI _CRS */ + unsigned long flags; + u32 reg; + + if (!dmi_check_system(amd_gpio_quirk_yoga7_14agp11)) + return; + if (pin >= gpio_dev->gc.ngpio) + return; + + raw_spin_lock_irqsave(&gpio_dev->lock, flags); + reg = readl(gpio_dev->base + pin * 4); + reg |= BIT(INTERRUPT_ENABLE_OFF) | BIT(INTERRUPT_MASK_OFF); + writel(reg, gpio_dev->base + pin * 4); + raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); + + dev_info(&gpio_dev->pdev->dev, + "Enabled IRQ for GPIO %u (Yoga 7 14AGP11 touchscreen)\n", + pin); +} + static int amd_gpio_get_direction(struct gpio_chip *gc, unsigned offset) { unsigned long flags; @@ -1219,6 +1253,7 @@ static int amd_gpio_probe(struct platform_device *pdev) /* Disable and mask interrupts */ amd_gpio_irq_init(gpio_dev); + amd_gpio_apply_quirks(gpio_dev); girq = &gpio_dev->gc.irq; gpio_irq_chip_set_chip(girq, &amd_gpio_irqchip); -- cgit v1.2.3 From cb6f19552b49be16db5d50d5d59c0ec2b5c38f13 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 5 Apr 2026 16:33:57 +0200 Subject: dt-bindings: display/msm: dp-controller: Correct SM8650 IO range DP on Qualcomm SM8650 come with nine address ranges, so describe the remaining ones as optional to keep ABI backwards compatible. Driver also does not need them to operate correctly. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring (Arm) Patchwork: https://patchwork.freedesktop.org/patch/716450/ Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-1-34f4024c65dc@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/dp-controller.yaml | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index 8239adb7f7d3..e4f17d29343b 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -277,7 +277,6 @@ allOf: - qcom,sc8180x-dp - qcom,sdm845-dp - qcom,sm8350-dp - - qcom,sm8650-dp then: properties: reg: @@ -290,6 +289,24 @@ allOf: minItems: 6 maxItems: 6 + - if: + properties: + compatible: + contains: + enum: + - qcom,sm8650-dp + then: + properties: + reg: + minItems: 5 + maxItems: 9 + clocks: + minItems: 6 + maxItems: 6 + clocks-names: + minItems: 6 + maxItems: 6 + - if: properties: compatible: -- cgit v1.2.3 From 557226acef41c0b651588dc9f8911ec950f39101 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 5 Apr 2026 16:33:58 +0200 Subject: dt-bindings: display/msm: dp-controller: Allow DAI on SM8650 and others DisplayPort on Qualcomm SoCs like SM8650 and compatible SM8750 supports audio and there is already DTS having cells and sound-name-prefix. The "else:" clause for non-EDP and non-aux-bus cases already requires '#sound-dai-cells', so it should actually reference the dai-common.yaml for other properties, as pointed out by dtbs_check warnings like: sm8650-hdk-display-card-rear-camera-card.dtb: displayport-controller@af54000 (qcom,sm8650-dp): Unevaluated properties are not allowed ('sound-name-prefix' was unexpected) Signed-off-by: Krzysztof Kozlowski Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/716452/ Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-2-34f4024c65dc@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov --- Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index e4f17d29343b..b96e1ea40d3f 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -219,6 +219,7 @@ allOf: - required: - "#sound-dai-cells" else: + $ref: /schemas/sound/dai-common.yaml# properties: aux-bus: false required: -- cgit v1.2.3 From bef8a15a6ee2b6c5940add7ef6bf61379905a783 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 5 Apr 2026 16:33:59 +0200 Subject: dt-bindings: display/msm: sm8650: Correct VBIF range in example VBIF register range is 0x3000 long, so correct the example. No practical impact, except when existing code is being re-used in new contributions. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring (Arm) Patchwork: https://patchwork.freedesktop.org/patch/716454/ Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-3-34f4024c65dc@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov --- Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml | 2 +- Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml index dccac525d202..134321b50897 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml @@ -70,7 +70,7 @@ examples: display-controller@ae01000 { compatible = "qcom,sm8650-dpu"; reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; + <0x0aeb0000 0x3000>; reg-names = "mdp", "vbif"; clocks = <&gcc_axi_clk>, diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml index a1c53e191033..0f7f79527748 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-mdss.yaml @@ -112,7 +112,7 @@ examples: display-controller@ae01000 { compatible = "qcom,sm8650-dpu"; reg = <0x0ae01000 0x8f000>, - <0x0aeb0000 0x2008>; + <0x0aeb0000 0x3000>; reg-names = "mdp", "vbif"; clocks = <&gcc_axi_clk>, -- cgit v1.2.3 From 399f7748789ced4d8bf6a3f9aa550d007283d005 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 5 Apr 2026 16:34:00 +0200 Subject: dt-bindings: display/msm: sm8750-mdss: Correct DPU and DP ranges in example VBIF register range is 0x3000 long. DisplayPort block has few too short ranges and misses four more address spaces. No practical impact, except when existing code is being re-used in new contributions. Reviewed-by: Dmitry Baryshkov Signed-off-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/716453/ Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-4-34f4024c65dc@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/qcom,sm8750-mdss.yaml | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml index a38c2261ef1a..46dc0d28da29 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8750-mdss.yaml @@ -117,7 +117,7 @@ examples: display-controller@ae01000 { compatible = "qcom,sm8750-dpu"; reg = <0x0ae01000 0x93000>, - <0x0aeb0000 0x2008>; + <0x0aeb0000 0x3000>; reg-names = "mdp", "vbif"; @@ -389,11 +389,15 @@ examples: displayport-controller@af54000 { compatible = "qcom,sm8750-dp", "qcom,sm8650-dp"; - reg = <0xaf54000 0x104>, - <0xaf54200 0xc0>, - <0xaf55000 0x770>, - <0xaf56000 0x9c>, - <0xaf57000 0x9c>; + reg = <0x0af54000 0x200>, + <0x0af54200 0x200>, + <0x0af55000 0xc00>, + <0x0af56000 0x400>, + <0x0af57000 0x400>, + <0x0af58000 0x400>, + <0x0af59000 0x400>, + <0x0af5a000 0x600>, + <0x0af5b000 0x600>; interrupts-extended = <&mdss 12>; -- cgit v1.2.3 From 795b19cbcf43414748261b9dcc783bebfbceb89a Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 5 Apr 2026 16:34:01 +0200 Subject: dt-bindings: display/msm: qcom,eliza-mdss: Correct DPU and DP ranges in example VBIF register range is 0x3000 long. DisplayPort block has few too short ranges and misses four more address spaces. Similarly first part of DSI space should be 0x300 long. No practical impact, except when existing code is being re-used in new contributions. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Dmitry Baryshkov Acked-by: Rob Herring (Arm) Patchwork: https://patchwork.freedesktop.org/patch/716460/ Link: https://lore.kernel.org/r/20260405-dts-qcom-display-regs-v2-5-34f4024c65dc@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov --- .../bindings/display/msm/qcom,eliza-mdss.yaml | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml index 47938d13d1ca..bd4ba91a171f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,eliza-mdss.yaml @@ -119,7 +119,7 @@ examples: mdss_mdp: display-controller@ae01000 { compatible = "qcom,eliza-dpu"; reg = <0x0ae01000 0x93000>, - <0x0aeb0000 0x2008>; + <0x0aeb0000 0x3000>; reg-names = "mdp", "vbif"; @@ -304,7 +304,7 @@ examples: mdss_dsi0_phy: phy@ae95000 { compatible = "qcom,eliza-dsi-phy-4nm", "qcom,sm8650-dsi-phy-4nm"; reg = <0x0ae95000 0x200>, - <0x0ae95200 0x280>, + <0x0ae95200 0x300>, <0x0ae95500 0x400>; reg-names = "dsi_phy", "dsi_phy_lane", @@ -388,7 +388,7 @@ examples: mdss_dsi1_phy: phy@ae97000 { compatible = "qcom,eliza-dsi-phy-4nm", "qcom,sm8650-dsi-phy-4nm"; reg = <0x0ae97000 0x200>, - <0x0ae97200 0x280>, + <0x0ae97200 0x300>, <0x0ae97500 0x400>; reg-names = "dsi_phy", "dsi_phy_lane", @@ -407,11 +407,15 @@ examples: displayport-controller@af54000 { compatible = "qcom,eliza-dp", "qcom,sm8650-dp"; - reg = <0xaf54000 0x104>, - <0xaf54200 0xc0>, - <0xaf55000 0x770>, - <0xaf56000 0x9c>, - <0xaf57000 0x9c>; + reg = <0x0af54000 0x200>, + <0x0af54200 0x200>, + <0x0af55000 0xc00>, + <0x0af56000 0x400>, + <0x0af57000 0x400>, + <0x0af58000 0x400>, + <0x0af59000 0x400>, + <0x0af5a000 0x600>, + <0x0af5b000 0x600>; interrupts-extended = <&mdss 12>; -- cgit v1.2.3 From 933430f1709b089a0bf0b23ef0f047014ef899e7 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Tue, 14 Apr 2026 17:14:30 +0200 Subject: drm/msm/dpu: fix UV scanlines calculation for YUV UBWC formats The UV scanlines is calculated with (height + 1) / 2 unlike the Y scanlines, add back the correct scanlines calculation for UBWC YUV formats. Fixes: 2f3ff6ab8f5c ("drm/msm/dpu: use standard functions in _dpu_format_populate_plane_sizes_ubwc()") Fixes: ada4a19ed21c ("drm/msm/dpu: rewrite _dpu_format_populate_plane_sizes_ubwc()") Signed-off-by: Neil Armstrong Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/718309/ Link: https://lore.kernel.org/r/20260414-topic-sm8x50-msm-dpu1-formats-qc10c-v1-1-0b62325b9030@linaro.org Signed-off-by: Dmitry Baryshkov --- drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c index 6e8883dbfad4..590922c4f69b 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_formats.c @@ -61,7 +61,7 @@ static int _dpu_format_populate_plane_sizes_ubwc( bool meta = MSM_FORMAT_IS_UBWC(fmt); if (MSM_FORMAT_IS_YUV(fmt)) { - unsigned int stride, sclines; + unsigned int stride, y_sclines, uv_sclines; unsigned int y_tile_width, y_tile_height; unsigned int y_meta_stride, y_meta_scanlines; unsigned int uv_meta_stride, uv_meta_scanlines; @@ -77,23 +77,25 @@ static int _dpu_format_populate_plane_sizes_ubwc( y_tile_width = 32; } - sclines = round_up(fb->height, 16); + y_sclines = round_up(fb->height, 16); + uv_sclines = round_up((fb->height+1)>>1, 16); y_tile_height = 4; } else { stride = round_up(fb->width, 128); y_tile_width = 32; - sclines = round_up(fb->height, 32); + y_sclines = round_up(fb->height, 32); + uv_sclines = round_up((fb->height+1)>>1, 32); y_tile_height = 8; } layout->plane_pitch[0] = stride; layout->plane_size[0] = round_up(layout->plane_pitch[0] * - sclines, DPU_UBWC_PLANE_SIZE_ALIGNMENT); + y_sclines, DPU_UBWC_PLANE_SIZE_ALIGNMENT); layout->plane_pitch[1] = stride; layout->plane_size[1] = round_up(layout->plane_pitch[1] * - sclines, DPU_UBWC_PLANE_SIZE_ALIGNMENT); + uv_sclines, DPU_UBWC_PLANE_SIZE_ALIGNMENT); if (!meta) return 0; -- cgit v1.2.3 From d03279f0d9fdbe6f6761f191a76093c395930018 Mon Sep 17 00:00:00 2001 From: Mahadevan P Date: Tue, 28 Apr 2026 17:14:25 +0530 Subject: drm/msm/dpu: Fix Kaanapali CWB register configuration The Kaanapali DPU catalog defines kaanapali_cwb[] with the correct CWB base addresses for this platform (0x169200, 0x169600, 0x16a200, 0x16a600), but the dpu_kaanapali_cfg struct was mistakenly pointing to sm8650_cwb instead. The SM8650 CWB blocks sit at completely different offsets (0x66200, 0x66600, 0x7E200, 0x7E600), so using them on Kaanapali would program CWB registers at wrong addresses, corrupting unrelated hardware blocks and breaking writeback capture. Fix this by pointing .cwb to the correct kaanapali_cwb array. Fixes: 83fe2cd56b1d ("drm/msm/dpu: Add support for Kaanapali DPU") Signed-off-by: Mahadevan P Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/721444/ Link: https://lore.kernel.org/r/20260428-kaanapali_cwb-v1-1-51fdb2c65498@oss.qualcomm.com Signed-off-by: Dmitry Baryshkov --- drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_13_0_kaanapali.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_13_0_kaanapali.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_13_0_kaanapali.h index b7b06e45b529..06da1583fb1e 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_13_0_kaanapali.h +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_13_0_kaanapali.h @@ -480,7 +480,7 @@ const struct dpu_mdss_cfg dpu_kaanapali_cfg = { .wb_count = ARRAY_SIZE(kaanapali_wb), .wb = kaanapali_wb, .cwb_count = ARRAY_SIZE(kaanapali_cwb), - .cwb = sm8650_cwb, + .cwb = kaanapali_cwb, .intf_count = ARRAY_SIZE(kaanapali_intf), .intf = kaanapali_intf, .vbif = &sm8650_vbif, -- cgit v1.2.3 From 5b49a46baa853b26dbefa65c6c75dd9ff69f63d4 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 28 Apr 2026 20:21:38 +0300 Subject: drm/msm/dsi: don't dump registers past the mapped region On DSI 6G platforms the IO address space is internally adjusted by io_offset. Later this adjusted address might be used for memory dumping. However the size that is used for memory dumping isn't adjusted to account for the io_offset, leading to the potential access to the unmapped region. Lower ctrl_size by the io_offset value to prevent access past the mapped area. msm_disp_snapshot_add_block+0x1d4/0x3c8 [msm] (P) msm_dsi_host_snapshot+0x4c/0x78 [msm] msm_dsi_snapshot+0x28/0x50 [msm] msm_disp_snapshot_capture_state+0x74/0x140 [msm] msm_disp_snapshot_state_sync+0x60/0x90 [msm] _msm_disp_snapshot_work+0x30/0x90 [msm] kthread_worker_fn+0xdc/0x460 kthread+0x120/0x140 Fixes: bac2c6a62ed9 ("drm/msm: get rid of msm_iomap_size") Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Patchwork: https://patchwork.freedesktop.org/patch/721747/ Link: https://lore.kernel.org/r/20260428-msm-fix-dsi-dump-v1-1-5d4cb5ccfac7@oss.qualcomm.com --- drivers/gpu/drm/msm/dsi/dsi_host.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 565d425f88b8..982abaaac00d 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -2033,6 +2033,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi) /* fixup base address by io offset */ msm_host->ctrl_base += cfg->io_offset; + msm_host->ctrl_size -= cfg->io_offset; ret = devm_regulator_bulk_get_const(&pdev->dev, cfg->num_regulators, cfg->regulator_data, -- cgit v1.2.3 From c0c70a11365cba7fba25a77463582bcec0f7846e Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 5 May 2026 03:24:58 +0300 Subject: drm/msm/dpu: don't mix devm and drmm functions Mixing devm and drmm functions will result in a use-after-free on msm driver teardown if userspace keeps a reference on the drm device: The WB connector data will be destroyed because of the use of devm_kzalloc()), while the usersoace still can try interacting with the WB connector (which uses drmm_ functions). Change dpu_writeback_init() to use drmm_. Fixes: 0b37ac63fc9d ("drm/msm/dpu: use drmm_writeback_connector_init()") Reported-by: Christophe JAILLET Closes: https://lore.kernel.org/r/78c764b8-44cf-4db5-88e7-807a85954518@wanadoo.fr Signed-off-by: Dmitry Baryshkov Reviewed-by: John.Harrison@Igalia.com Patchwork: https://patchwork.freedesktop.org/patch/722656/ Link: https://lore.kernel.org/r/20260505-wb-drop-encoder-v5-1-42567b7c7af2@oss.qualcomm.com --- drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c index 7545c0293efb..6f2370c9dd98 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_writeback.c @@ -5,6 +5,7 @@ #include #include +#include #include "dpu_writeback.h" @@ -125,7 +126,7 @@ int dpu_writeback_init(struct drm_device *dev, struct drm_encoder *enc, struct dpu_wb_connector *dpu_wb_conn; int rc = 0; - dpu_wb_conn = devm_kzalloc(dev->dev, sizeof(*dpu_wb_conn), GFP_KERNEL); + dpu_wb_conn = drmm_kzalloc(dev, sizeof(*dpu_wb_conn), GFP_KERNEL); if (!dpu_wb_conn) return -ENOMEM; -- cgit v1.2.3 From 0b28000b64f40dd29a730507aa0447231960cfb8 Mon Sep 17 00:00:00 2001 From: Edward Adam Davis Date: Thu, 7 May 2026 20:50:10 +0800 Subject: RDMA/nldev: Add mutual exclusion in nldev_dellink() We must serialize calls to nldev_dellink() or risk a crash as syzbot reported: KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] Call Trace: udp_tunnel_sock_release+0x6d/0x80 net/ipv4/udp_tunnel_core.c:197 rxe_release_udp_tunnel drivers/infiniband/sw/rxe/rxe_net.c:294 [inline] rxe_sock_put drivers/infiniband/sw/rxe/rxe_net.c:639 [inline] rxe_net_del+0xfb/0x290 drivers/infiniband/sw/rxe/rxe_net.c:660 rxe_dellink+0x15/0x20 drivers/infiniband/sw/rxe/rxe.c:254 Fixes: a60e3f3d6fba ("RDMA/nldev: Add dellink function pointer") Reported-by: syzbot+d8f76778263ab65c2b21@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=d8f76778263ab65c2b21 Tested-by: syzbot+d8f76778263ab65c2b21@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis Link: https://patch.msgid.link/tencent_611BEB4B141B1A2526BAA3BBB2335F9E9108@qq.com Reviewed-by: Zhu Yanjun Signed-off-by: Leon Romanovsky --- drivers/infiniband/core/nldev.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/infiniband/core/nldev.c b/drivers/infiniband/core/nldev.c index 96c745d5bac4..5aaba2b9746b 100644 --- a/drivers/infiniband/core/nldev.c +++ b/drivers/infiniband/core/nldev.c @@ -51,6 +51,7 @@ * a controlled QKEY. */ static bool privileged_qkey; +static DEFINE_MUTEX(nldev_dellink_mutex); typedef int (*res_fill_func_t)(struct sk_buff*, bool, struct rdma_restrack_entry*, uint32_t); @@ -1846,7 +1847,9 @@ static int nldev_dellink(struct sk_buff *skb, struct nlmsghdr *nlh, * implicitly scoped to the driver supporting dynamic link deletion like RXE. */ if (device->link_ops && device->link_ops->dellink) { + mutex_lock(&nldev_dellink_mutex); err = device->link_ops->dellink(device); + mutex_unlock(&nldev_dellink_mutex); if (err) return err; } -- cgit v1.2.3 From 0bf1b4dda2d0c89980eab816778722cf51aa404c Mon Sep 17 00:00:00 2001 From: Yi Lai Date: Thu, 7 May 2026 20:51:06 +0800 Subject: selftests/rdma: explicitly skip tests when required modules are missing Currently, the rdma rxe selftests fail with an exit code of 1 when required kernel modules are not present. This causes spurious failures in environments where these modules might not be compiled or available. Include the standard kselftest 'ktap_helpers.sh' and replace the hardcoded error exits with '$KSFT_SKIP'. This ensures the tests are properly marked as skipped rather than failed. Fixes: e01027cab38a ("RDMA/rxe: Add testcase for net namespace rxe") Signed-off-by: Yi Lai Link: https://patch.msgid.link/20260507125106.3114167-1-yi1.lai@intel.com Reviewed-by: Zhu Yanjun Signed-off-by: Leon Romanovsky --- tools/testing/selftests/rdma/rxe_ipv6.sh | 6 ++++-- tools/testing/selftests/rdma/rxe_rping_between_netns.sh | 7 +++++++ tools/testing/selftests/rdma/rxe_socket_with_netns.sh | 6 ++++++ tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh | 6 ++++-- 4 files changed, 21 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/rdma/rxe_ipv6.sh b/tools/testing/selftests/rdma/rxe_ipv6.sh index b7059bfd6d7c..32dad687a044 100755 --- a/tools/testing/selftests/rdma/rxe_ipv6.sh +++ b/tools/testing/selftests/rdma/rxe_ipv6.sh @@ -8,6 +8,8 @@ RXE_NAME="rxe6" PORT=4791 IP6_ADDR="2001:db8::1/64" +source "$(dirname "$0")/../kselftest/ktap_helpers.sh" + exec > /dev/null # Cleanup function to run on exit (even on failure) @@ -21,8 +23,8 @@ trap cleanup EXIT # 1. Prerequisites check for mod in tun veth rdma_rxe; do if ! modinfo "$mod" >/dev/null 2>&1; then - echo "Error: Kernel module '$mod' not found." - exit 1 + echo "SKIP: Kernel module '$mod' not found." >&2 + exit $KSFT_SKIP fi done diff --git a/tools/testing/selftests/rdma/rxe_rping_between_netns.sh b/tools/testing/selftests/rdma/rxe_rping_between_netns.sh index e5b876f58c6e..e7554fbb8951 100755 --- a/tools/testing/selftests/rdma/rxe_rping_between_netns.sh +++ b/tools/testing/selftests/rdma/rxe_rping_between_netns.sh @@ -8,6 +8,8 @@ IP_A="1.1.1.1" IP_B="1.1.1.2" PORT=4791 +source "$(dirname "$0")/../kselftest/ktap_helpers.sh" + exec > /dev/null # --- Cleanup Routine --- @@ -27,6 +29,11 @@ if [[ $EUID -ne 0 ]]; then exit 1 fi +if ! modinfo rdma_rxe >/dev/null 2>&1; then + echo "SKIP: Kernel module 'rdma_rxe' not found." >&2 + exit $KSFT_SKIP +fi + modprobe rdma_rxe || { echo "Failed to load rdma_rxe"; exit 1; } # --- Setup Network Topology --- diff --git a/tools/testing/selftests/rdma/rxe_socket_with_netns.sh b/tools/testing/selftests/rdma/rxe_socket_with_netns.sh index 002e5098f751..9478657c02c1 100755 --- a/tools/testing/selftests/rdma/rxe_socket_with_netns.sh +++ b/tools/testing/selftests/rdma/rxe_socket_with_netns.sh @@ -4,6 +4,8 @@ PORT=4791 MODS=("tun" "rdma_rxe") +source "$(dirname "$0")/../kselftest/ktap_helpers.sh" + exec > /dev/null # --- Helper: Cleanup Routine --- @@ -26,6 +28,10 @@ if [[ $EUID -ne 0 ]]; then fi for m in "${MODS[@]}"; do + if ! modinfo "$m" >/dev/null 2>&1; then + echo "SKIP: Kernel module '$m' not found." >&2 + exit $KSFT_SKIP + fi modprobe "$m" || { echo "Error: Failed to load $m"; exit 1; } done diff --git a/tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh b/tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh index 021ca451499d..8c18cea7535c 100755 --- a/tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh +++ b/tools/testing/selftests/rdma/rxe_test_NETDEV_UNREGISTER.sh @@ -5,6 +5,8 @@ DEV_NAME="tun0" RXE_NAME="rxe0" RDMA_PORT=4791 +source "$(dirname "$0")/../kselftest/ktap_helpers.sh" + exec > /dev/null # --- Cleanup Routine --- @@ -19,8 +21,8 @@ trap cleanup EXIT # 1. Dependency Check if ! modinfo rdma_rxe >/dev/null 2>&1; then - echo "Error: rdma_rxe module not found." - exit 1 + echo "SKIP: rdma_rxe module not found." >&2 + exit $KSFT_SKIP fi modprobe rdma_rxe -- cgit v1.2.3 From f6b079629becfa977f9c51fe53ad2e6dcc55ef44 Mon Sep 17 00:00:00 2001 From: Lord Ulf Henrik Holmberg Date: Sat, 9 May 2026 10:40:11 +0200 Subject: RDMA/bnxt_re: zero shared page before exposing to userspace bnxt_re_alloc_ucontext() allocates uctx->shpg via __get_free_page(GFP_KERNEL). The buddy allocator does not zero pages without __GFP_ZERO, so the page contains stale kernel data from whatever object most recently freed it. The page is then mapped into userspace via vm_insert_page() under BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes 4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed to userspace unsanitised, leaking kernel memory contents. Any user with access to /dev/infiniband/uverbsX on a host with a bnxt_re device (typically rdma group membership) can read this data via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT. Other shared pages in the same file already use get_zeroed_page() correctly: drivers/infiniband/hw/bnxt_re/ib_verbs.c srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL); cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL); uctx->shpg is the only outlier. Bring it in line with the existing convention by switching to get_zeroed_page(). Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Lord Ulf Henrik Holmberg Link: https://patch.msgid.link/20260509084011.11971-1-pomzm67@gmail.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/bnxt_re/ib_verbs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c index 7ed294516b7e..365ec2767d25 100644 --- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c +++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c @@ -4638,7 +4638,7 @@ int bnxt_re_alloc_ucontext(struct ib_ucontext *ctx, struct ib_udata *udata) uctx->rdev = rdev; - uctx->shpg = (void *)__get_free_page(GFP_KERNEL); + uctx->shpg = (void *)get_zeroed_page(GFP_KERNEL); if (!uctx->shpg) { rc = -ENOMEM; goto fail; -- cgit v1.2.3 From ee047fc7a2da90554410128195058c409a391d43 Mon Sep 17 00:00:00 2001 From: Ricardo Neri Date: Fri, 24 Apr 2026 14:41:13 -0700 Subject: Documentation: intel_pstate: Fix description of asymmetric packing with SMT Patchset [1], including commits 046a5a95c3b0 ("x86/sched/itmt: Give all SMT siblings of a core the same priority") 995998ebdebd ("x86/sched: Remove SD_ASYM_PACKING from the SMT domain flags") overhauled asym_packing handling in the scheduler on x86 hybrid processors with SMT. It removed SD_ASYM_PACKING from the x86 SMT scheduling domain and made all SMT siblings of a core share the same priority. As a result, asym_packing operates only across physical cores, spreading tasks among them and only using idle SMT siblings once all physical cores are busy. Fix the documentation to reflect this behavior. Fixes: f20af84c29b2 ("cpufreq: intel_pstate: Document hybrid processor support") Link: https://lore.kernel.org/r/20230406203148.19182-1-ricardo.neri-calderon@linux.intel.com [1] Signed-off-by: Ricardo Neri [ rjw: Changelog edits ] Link: https://patch.msgid.link/20260424-rneri-fix-intel-pstate-doc-smt-asym-packing-v1-1-317bf7d5c362@linux.intel.com Signed-off-by: Rafael J. Wysocki --- Documentation/admin-guide/pm/intel_pstate.rst | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/Documentation/admin-guide/pm/intel_pstate.rst b/Documentation/admin-guide/pm/intel_pstate.rst index fde967b0c2e0..25fe5d88fea6 100644 --- a/Documentation/admin-guide/pm/intel_pstate.rst +++ b/Documentation/admin-guide/pm/intel_pstate.rst @@ -355,11 +355,12 @@ HyperThreading (HT) in the context of Intel processors, is enabled on at least one core, ``intel_pstate`` assigns performance-based priorities to CPUs. Namely, the priority of a given CPU reflects its highest HWP performance level which causes the CPU scheduler to generally prefer more performant CPUs, so the less -performant CPUs are used when the other ones are fully loaded. However, SMT -siblings (that is, logical CPUs sharing one physical core) are treated in a -special way such that if one of them is in use, the effective priority of the -other ones is lowered below the priorities of the CPUs located in the other -physical cores. +performant CPUs are used when the other ones are fully loaded. SMT siblings +(that is, logical CPUs sharing one physical core) are given the same priority. +The scheduler can pull tasks from lower-priority cores and place them on any +sibling. Since the scheduler spreads tasks among physical cores, tasks will be +placed on the SMT siblings of physical cores only after all physical cores are +busy. This approach maximizes performance in the majority of cases, but unfortunately it also leads to excessive energy usage in some important scenarios, like video -- cgit v1.2.3 From 0e7c710478b3089cdfe8669347f77b163e836c4f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 21:20:30 +0200 Subject: cpufreq: intel_pstate: Use correct scaling factor on Raptor Lake-E Raptor Lake-E has the same processor ID as Raptor Lake-S, so there is an entry in intel_hybrid_scaling_factor[] for it. It does not contain E-cores though and hybrid_get_cpu_type() returns 0 for its P-cores, so they get the default "core" scaling factor. However, the original Raptor Lake scaling factor for P-cores still needs to be used for mapping the HWP performance levels of the P-cores in Raptor Lake-E to frequency, as though they were part of a real hybrid system. To address this, update hwp_get_cpu_scaling() to return hybrid_scaling_factor, which is the P-core scaling factor retrieved from intel_hybrid_scaling_factor[], for all CPUs that are not enumerated as E-cores. Fixes: 9b18d536b124 ("cpufreq: intel_pstate: Use CPPC to get scaling factors") Link: https://lore.kernel.org/all/20260511235328.2018458-1-srinivas.pandruvada@linux.intel.com/ Reported-by: Henry Tseng Closes: https://lore.kernel.org/linux-pm/20260508063032.3248602-1-henrytseng@qnap.com/ Signed-off-by: Rafael J. Wysocki Cc: All applicable Link: https://patch.msgid.link/4523296.ejJDZkT8p0@rafael.j.wysocki --- drivers/cpufreq/intel_pstate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 1292da53e5fc..978e2b604ac8 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -2279,7 +2279,7 @@ static int hwp_get_cpu_scaling(int cpu) * Return the hybrid scaling factor for P-cores and use the * default core scaling for E-cores. */ - if (hybrid_get_cpu_type(cpu) == INTEL_CPU_TYPE_CORE) + if (hybrid_get_cpu_type(cpu) != INTEL_CPU_TYPE_ATOM) return hybrid_scaling_factor; return core_get_scaling(); -- cgit v1.2.3 From 85cffdb21bc1a928f4c89f88dcdf42a460b04e70 Mon Sep 17 00:00:00 2001 From: Henry Tseng Date: Wed, 13 May 2026 18:28:46 +0800 Subject: cpufreq: intel_pstate: Use HYBRID_SCALING_FACTOR_ADL for Bartlett Lake Bartlett Lake P-core only SKUs (e.g. Intel Core 9 273PE) do not report X86_FEATURE_HYBRID_CPU and are not in intel_hybrid_scaling_factor[]. In hwp_get_cpu_scaling(), the non-hybrid fallback then applies core_get_scaling() (100000), producing cpuinfo_max_freq values that exceed the documented Max Turbo Frequency: intel_pstate: CPU0: PERF_CTL turbo = 57 intel_pstate: CPU0: HWP_CAP guaranteed = 30 intel_pstate: CPU0: HWP_CAP highest = 70 intel_pstate: CPU0: HWP-to-frequency scaling factor: 100000 intel_pstate: set_policy cpuinfo.max 7000000 policy->max 7000000 ... intel_pstate: CPU12: PERF_CTL turbo = 57 intel_pstate: CPU12: HWP_CAP guaranteed = 30 intel_pstate: CPU12: HWP_CAP highest = 73 intel_pstate: CPU12: HWP-to-frequency scaling factor: 100000 intel_pstate: set_policy cpuinfo.max 7300000 policy->max 7300000 ... Per the Intel datasheet [1], the Intel Core 9 273PE specifies: Performance-cores: 12 Efficient-cores: 0 Max Turbo Frequency: 5.7 GHz Intel Thermal Velocity Boost Frequency: 5.7 GHz Intel Turbo Boost Max Technology 3.0 Frequency: 5.6 GHz Performance-core Max Turbo Frequency: 5.4 GHz Performance-core Base Frequency: 2.3 GHz Bartlett Lake P-cores are Raptor Cove cores, per commit d466304c4322 ("x86/cpu: Add CPU model number for Bartlett Lake CPUs with Raptor Cove cores"). The Alder Lake and Raptor Lake P-core entries in intel_hybrid_scaling_factor[] use HYBRID_SCALING_FACTOR_ADL (78741). The same factor applies to Bartlett Lake. Add Bartlett Lake to intel_hybrid_scaling_factor[] with HYBRID_SCALING_FACTOR_ADL so HWP performance levels map to the correct CPU frequencies matching the datasheet's Max Turbo Frequency. Link: https://www.intel.com/content/www/us/en/products/sku/245717/intel-core-9-processor-273pe-36m-cache-up-to-5-70-ghz/specifications.html [1] Signed-off-by: Henry Tseng [ rjw: Changelog tweak ] Link: https://patch.msgid.link/20260513102847.75179-1-henrytseng@qnap.com Signed-off-by: Rafael J. Wysocki --- drivers/cpufreq/intel_pstate.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 978e2b604ac8..1f093e346430 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -3734,6 +3734,7 @@ static const struct x86_cpu_id intel_hybrid_scaling_factor[] = { X86_MATCH_VFM(INTEL_RAPTORLAKE, HYBRID_SCALING_FACTOR_ADL), X86_MATCH_VFM(INTEL_RAPTORLAKE_P, HYBRID_SCALING_FACTOR_ADL), X86_MATCH_VFM(INTEL_RAPTORLAKE_S, HYBRID_SCALING_FACTOR_ADL), + X86_MATCH_VFM(INTEL_BARTLETTLAKE, HYBRID_SCALING_FACTOR_ADL), X86_MATCH_VFM(INTEL_METEORLAKE_L, HYBRID_SCALING_FACTOR_MTL), X86_MATCH_VFM(INTEL_LUNARLAKE_M, HYBRID_SCALING_FACTOR_LNL), {} -- cgit v1.2.3 From 46e351e84853dda726072bb3d38ba7bd63e7532b Mon Sep 17 00:00:00 2001 From: Alexander Koskovich Date: Sat, 14 Mar 2026 04:14:50 +0000 Subject: drm/msm: Fix GMEM_BASE for A650 Commit dc220915ddb2 ("drm/msm: Fix GMEM_BASE for gen8") changed the GMEM_BASE check from adreno_is_a650_family() & adreno_is_a740_family() to family >= ADRENO_6XX_GEN4. This inadvertently excluded A650 (ADRENO_6XX_GEN3), causing it to report an incorrect GMEM_BASE which results in severe rendering corruption. Update check to also include ADRENO_6XX_GEN3 to fix A650. Fixes: dc220915ddb2 ("drm/msm: Fix GMEM_BASE for gen8") Signed-off-by: Alexander Koskovich Reviewed-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Reviewed-by: Akhil P Oommen Patchwork: https://patchwork.freedesktop.org/patch/711880/ Message-ID: <20260314-fix-gmem-base-a650-v1-1-3308f60cf74c@pm.me> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index 66f80f2d12f9..a812a4590cc0 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -376,7 +376,7 @@ int adreno_get_param(struct msm_gpu *gpu, struct msm_context *ctx, *value = adreno_gpu->info->gmem; return 0; case MSM_PARAM_GMEM_BASE: - if (adreno_gpu->info->family >= ADRENO_6XX_GEN4) + if (adreno_gpu->info->family >= ADRENO_6XX_GEN3) *value = 0; else *value = 0x100000; -- cgit v1.2.3 From e64bca63647db1d5518198d6c5ca2dbcc66b182b Mon Sep 17 00:00:00 2001 From: Felix Gu Date: Sat, 24 Jan 2026 00:37:38 +0800 Subject: drm/msm/adreno: Fix a reference leak in a6xx_gpu_init() In a6xx_gpu_init(), node is obtained via of_parse_phandle(). While there was a manual of_node_put() at the end of the common path, several early error returns would bypass this call, resulting in a reference leak. Fix this by using the __free(device_node) cleanup handler to release the reference when the variable goes out of scope. Fixes: 5a903a44a984 ("drm/msm/a6xx: Introduce GMU wrapper support") Signed-off-by: Felix Gu Patchwork: https://patchwork.freedesktop.org/patch/700661/ Message-ID: <20260124-a6xx_gpu-v1-1-fa0c8b2dcfb1@gmail.com> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index 615509c8917e..1e455391fbac 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -2621,7 +2621,6 @@ static struct msm_gpu *a6xx_gpu_init(struct drm_device *dev) struct platform_device *pdev = priv->gpu_pdev; struct adreno_platform_config *config = pdev->dev.platform_data; const struct adreno_info *info = config->info; - struct device_node *node; struct a6xx_gpu *a6xx_gpu; struct adreno_gpu *adreno_gpu; struct msm_gpu *gpu; @@ -2643,7 +2642,8 @@ static struct msm_gpu *a6xx_gpu_init(struct drm_device *dev) adreno_gpu->registers = NULL; /* Check if there is a GMU phandle and set it up */ - node = of_parse_phandle(pdev->dev.of_node, "qcom,gmu", 0); + struct device_node *node __free(device_node) = + of_parse_phandle(pdev->dev.of_node, "qcom,gmu", 0); /* FIXME: How do we gracefully handle this? */ BUG_ON(!node); @@ -2690,7 +2690,6 @@ static struct msm_gpu *a6xx_gpu_init(struct drm_device *dev) ret = a6xx_gmu_wrapper_init(a6xx_gpu, node); else ret = a6xx_gmu_init(a6xx_gpu, node); - of_node_put(node); if (ret) { a6xx_destroy(&(a6xx_gpu->base.base)); return ERR_PTR(ret); -- cgit v1.2.3 From af92ee994cc7f7e83a41c2025f32257a2f82a7ef Mon Sep 17 00:00:00 2001 From: Ferry Meng Date: Mon, 11 May 2026 21:18:16 +0800 Subject: ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow") added check_add_overflow() guards that break out of the ACE-building loops in set_posix_acl_entries_dacl() when the accumulated DACL size would wrap past 65535. However, each iteration allocates a struct smb_sid via kmalloc_obj() at the top of the loop and relies on the kfree(sid) call at the end of the loop body (the 'pass_same_sid' label in the first loop, and the explicit kfree at the tail of the second loop) to release it. The newly introduced 'break' statements bypass those kfree() calls, leaking the sid buffer every time an overflow is detected. A malicious or malformed file with enough POSIX ACL entries to trip the overflow check will leak one or more struct smb_sid allocations on every request that touches the file's DACL, providing a trivial kernel memory exhaustion vector. Free sid before breaking out of the loops to plug the leak. Fixes: 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow") Cc: stable@vger.kernel.org Signed-off-by: Ferry Meng Acked-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smbacl.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/fs/smb/server/smbacl.c b/fs/smb/server/smbacl.c index c1d1f34581d6..9161e9d7ed24 100644 --- a/fs/smb/server/smbacl.c +++ b/fs/smb/server/smbacl.c @@ -643,8 +643,10 @@ static void set_posix_acl_entries_dacl(struct mnt_idmap *idmap, ntace = (struct smb_ace *)((char *)pndace + *size); ace_sz = fill_ace_for_sid(ntace, sid, ACCESS_ALLOWED, flags, pace->e_perm, 0777); - if (check_add_overflow(*size, ace_sz, size)) + if (check_add_overflow(*size, ace_sz, size)) { + kfree(sid); break; + } (*num_aces)++; if (pace->e_tag == ACL_USER) ntace->access_req |= @@ -655,8 +657,10 @@ static void set_posix_acl_entries_dacl(struct mnt_idmap *idmap, ntace = (struct smb_ace *)((char *)pndace + *size); ace_sz = fill_ace_for_sid(ntace, sid, ACCESS_ALLOWED, 0x03, pace->e_perm, 0777); - if (check_add_overflow(*size, ace_sz, size)) + if (check_add_overflow(*size, ace_sz, size)) { + kfree(sid); break; + } (*num_aces)++; if (pace->e_tag == ACL_USER) ntace->access_req |= @@ -698,8 +702,10 @@ posix_default_acl: ntace = (struct smb_ace *)((char *)pndace + *size); ace_sz = fill_ace_for_sid(ntace, sid, ACCESS_ALLOWED, 0x0b, pace->e_perm, 0777); - if (check_add_overflow(*size, ace_sz, size)) + if (check_add_overflow(*size, ace_sz, size)) { + kfree(sid); break; + } (*num_aces)++; if (pace->e_tag == ACL_USER) ntace->access_req |= -- cgit v1.2.3 From 904901561e61a2b559070b20c74a8c95491f30aa Mon Sep 17 00:00:00 2001 From: Jeremy Laratro Date: Wed, 13 May 2026 08:23:26 +0900 Subject: ksmbd: fix null pointer dereference in proc_show_files() When a SMB2 client opens a file with a durable v2 handle and then issues SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the reconnectable file pointer but leaves the fp registered in global_ft.idr until the durable scavenger fires (up to fp->durable_timeout seconds later). During that window any read of /proc/fs/ksmbd/files (mode 0400) panics the kernel because proc_show_files() walks global_ft.idr and unconditionally dereferences fp->tcon->id with no NULL guard. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:proc_show_files+0x118/0x740 Call Trace: proc_show_files+0x118/0x740 seq_read_iter+0x4ef/0xe10 proc_reg_read_iter+0x1b7/0x280 ... Guard the dereference. A durable-disconnected fp legitimately has no tcon; report its tree id as 0 rather than oopsing. Fixes: b38f99c1217a ("ksmbd: add procfs interface for runtime monitoring and statistics") Cc: stable@vger.kernel.org Signed-off-by: Jeremy Laratro Acked-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/vfs_cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/smb/server/vfs_cache.c b/fs/smb/server/vfs_cache.c index 354c4d8a1cfb..913164c958b1 100644 --- a/fs/smb/server/vfs_cache.c +++ b/fs/smb/server/vfs_cache.c @@ -81,7 +81,7 @@ static int proc_show_files(struct seq_file *m, void *v) read_lock(&global_ft.lock); idr_for_each_entry(global_ft.idr, fp, id) { seq_printf(m, "%#-10x %#-10llx %#-10llx %#-10x", - fp->tcon->id, + fp->tcon ? fp->tcon->id : 0, fp->persistent_id, fp->volatile_id, atomic_read(&fp->refcount)); -- cgit v1.2.3 From 4b83cbc4c15f09b000cc06f033f64b0824b6dc87 Mon Sep 17 00:00:00 2001 From: Jeremy Laratro Date: Wed, 13 May 2026 08:26:16 +0900 Subject: ksmbd: fix null pointer dereference in compare_guid_key() session_fd_check() walks the per-inode m_op_list during durable-handle session teardown and sets op->conn = NULL for every opinfo whose conn matched the closing session's connection. The matching opinfo, however, stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list because destroy_lease_table() only runs on full TCP-connection teardown, not on SESSION_LOGOFF. If the same TCP connection then negotiates a fresh session with the same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a lease context on a different inode, find_same_lease_key() walks lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(), which unconditionally dereferences opinfo->conn->ClientGUID. The conn pointer is NULL and the kernel panics. Reproducer requires only a successful SMB2 SESSION_SETUP and a share configured with 'durable handles = yes'. KASAN report on mainline 70390501d194: general protection fault, probably for non-canonical address 0xdffffc0000000069: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:bcmp+0x5b/0x230 Call Trace: compare_guid_key+0x4b/0xd0 find_same_lease_key+0x324/0x690 smb2_open+0x6aea/0x8e60 handle_ksmbd_work+0x796/0xee0 ... Faulting address 0x348 is the offset of ClientGUID within struct ksmbd_conn, confirming opinfo->conn was NULL. Read opinfo->conn once and bail out if it has been cleared by a concurrent session_fd_check(). A half-detached opinfo cannot be the owner of an active lease, so returning 0 is the correct match result. Fixes: c8efcc786146 ("ksmbd: add support for durable handles v1/v2") Cc: stable@vger.kernel.org Signed-off-by: Jeremy Laratro Acked-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/oplock.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/smb/server/oplock.c b/fs/smb/server/oplock.c index 8feca02ddbf2..0f5c18520eff 100644 --- a/fs/smb/server/oplock.c +++ b/fs/smb/server/oplock.c @@ -481,8 +481,12 @@ static inline int compare_guid_key(struct oplock_info *opinfo, const char *guid1, const char *key1) { const char *guid2, *key2; + struct ksmbd_conn *conn; - guid2 = opinfo->conn->ClientGUID; + conn = READ_ONCE(opinfo->conn); + if (!conn) + return 0; + guid2 = conn->ClientGUID; key2 = opinfo->o_lease->lease_key; if (!memcmp(guid1, guid2, SMB2_CLIENT_GUID_SIZE) && !memcmp(key1, key2, SMB2_LEASE_KEY_SIZE)) -- cgit v1.2.3 From 2b4abf879360ea00a9e2b46d2d15dcdbc0687eed Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 11 Apr 2026 17:59:15 +0300 Subject: drm/msm/adreno: fix userspace-triggered crash on a2xx-a4xx Before a5xx Adreno driver will not try fetching UBWC params (because those generations didn't support UBWC anyway), however it's still possible to query UBWC-related params from the userspace, triggering possible NULL pointer dereference. Check for UBWC config in adreno_get_param() and return sane defaults if there is none. Fixes: a452510aad53 ("drm/msm/adreno: Switch to the common UBWC config struct") Signed-off-by: Dmitry Baryshkov Reviewed-by: Rob Clark Patchwork: https://patchwork.freedesktop.org/patch/717778/ Message-ID: <20260411-adreno-fix-ubwc-v3-1-4983156f3f80@oss.qualcomm.com> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index a812a4590cc0..03f96a1154e1 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -424,15 +424,21 @@ int adreno_get_param(struct msm_gpu *gpu, struct msm_context *ctx, *value = vm->mm_range; return 0; case MSM_PARAM_HIGHEST_BANK_BIT: + if (!adreno_gpu->ubwc_config) + return UERR(ENOENT, drm, "no UBWC on this platform"); *value = adreno_gpu->ubwc_config->highest_bank_bit; return 0; case MSM_PARAM_RAYTRACING: *value = adreno_gpu->has_ray_tracing; return 0; case MSM_PARAM_UBWC_SWIZZLE: + if (!adreno_gpu->ubwc_config) + return UERR(ENOENT, drm, "no UBWC on this platform"); *value = adreno_gpu->ubwc_config->ubwc_swizzle; return 0; case MSM_PARAM_MACROTILE_MODE: + if (!adreno_gpu->ubwc_config) + return UERR(ENOENT, drm, "no UBWC on this platform"); *value = adreno_gpu->ubwc_config->macrotile_mode; return 0; case MSM_PARAM_UCHE_TRAP_BASE: -- cgit v1.2.3 From 7a529ff48b99011c946e6d8addd071c06d3ccdae Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Sat, 11 Apr 2026 08:03:12 -0700 Subject: drm/msm/a6xx: Restore sysprof_active This got lost in the shuffle somehow when moving the vfunc table to catalogue. Fixes inhibiting IFPC when userspace is collecting perfcntr data. Fixes: 491fadb2b818 ("drm/msm/adreno: Move adreno_gpu_func to catalogue") Signed-off-by: Rob Clark Reviewed-by: Akhil P Oommen Patchwork: https://patchwork.freedesktop.org/patch/717780/ Message-ID: <20260411150312.257937-1-robin.clark@oss.qualcomm.com> --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index 1e455391fbac..99712f58e792 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -2739,6 +2739,7 @@ const struct adreno_gpu_funcs a6xx_gpu_funcs = { .create_private_vm = a6xx_create_private_vm, .get_rptr = a6xx_get_rptr, .progress = a6xx_progress, + .sysprof_setup = a6xx_gmu_sysprof_setup, }, .init = a6xx_gpu_init, .get_timestamp = a6xx_gmu_get_timestamp, @@ -2807,6 +2808,7 @@ const struct adreno_gpu_funcs a7xx_gpu_funcs = { .create_private_vm = a6xx_create_private_vm, .get_rptr = a6xx_get_rptr, .progress = a6xx_progress, + .sysprof_setup = a6xx_gmu_sysprof_setup, }, .init = a6xx_gpu_init, .get_timestamp = a6xx_gmu_get_timestamp, -- cgit v1.2.3 From 78d79c614aaa172ae1ddaea19a3885a9ff3ba857 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Sat, 18 Apr 2026 08:08:47 -0700 Subject: drm/msm: Correct modparam description Preemption is enabled for gen8 as well. Signed-off-by: Rob Clark Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/719256/ Message-ID: <20260418150847.157246-1-robin.clark@oss.qualcomm.com> --- drivers/gpu/drm/msm/adreno/adreno_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c index 4edfe80c5be7..fc38331ce640 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_device.c +++ b/drivers/gpu/drm/msm/adreno/adreno_device.c @@ -17,7 +17,7 @@ MODULE_PARM_DESC(snapshot_debugbus, "Include debugbus sections in GPU devcoredum module_param_named(snapshot_debugbus, snapshot_debugbus, bool, 0600); int enable_preemption = -1; -MODULE_PARM_DESC(enable_preemption, "Enable preemption (A7xx only) (1=on , 0=disable, -1=auto (default))"); +MODULE_PARM_DESC(enable_preemption, "Enable preemption (A7xx+ only) (1=on , 0=disable, -1=auto (default))"); module_param(enable_preemption, int, 0600); bool disable_acd; -- cgit v1.2.3 From 55e0f0d1c1a4ee1e46da7da4d443eb3044fb3851 Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Tue, 21 Apr 2026 13:02:38 +0900 Subject: drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN Commit "iommu: return full error code from iommu_map_sg[_atomic]()" changed iommu_map_sgtable() to return an ssize_t and negative values in error cases, rather than a size_t and a zero. Store the return value in the appropriate type and in case of error, return it rather than WARNing. Fixes: ad8f36e4b6b1 ("iommu: return full error code from iommu_map_sg[_atomic]()") Signed-off-by: Mikko Perttunen Patchwork: https://patchwork.freedesktop.org/patch/719685/ Message-ID: <20260421-iommu_map_sgtable-return-v1-3-fb484c07d2a1@nvidia.com> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_iommu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_iommu.c b/drivers/gpu/drm/msm/msm_iommu.c index 271baf4dc4e8..895d03b59da6 100644 --- a/drivers/gpu/drm/msm/msm_iommu.c +++ b/drivers/gpu/drm/msm/msm_iommu.c @@ -677,7 +677,7 @@ static int msm_iommu_map(struct msm_mmu *mmu, uint64_t iova, int prot) { struct msm_iommu *iommu = to_msm_iommu(mmu); - size_t ret; + ssize_t ret; WARN_ON(off != 0); @@ -686,7 +686,8 @@ static int msm_iommu_map(struct msm_mmu *mmu, uint64_t iova, iova |= GENMASK_ULL(63, 49); ret = iommu_map_sgtable(iommu->domain, iova, sgt, prot); - WARN_ON(!ret); + if (ret < 0) + return ret; return (ret == len) ? 0 : -EINVAL; } -- cgit v1.2.3 From b5c7a7f452b885bfbe102bd3a057a5f496802f8b Mon Sep 17 00:00:00 2001 From: Chen Ni Date: Tue, 28 Apr 2026 15:35:58 +0800 Subject: drm/msm/a6xx: Check kzalloc return in a8xx_hfi_send_perf_table Check the return value of kzalloc() to prevent a NULL pointer dereference on allocation failure. Fixes: 06cfbca0e1c6 ("drm/msm/a6xx: Share dependency vote table with GMU") Signed-off-by: Chen Ni Reviewed-by: Dmitry Baryshkov Reviewed-by: Akhil P Oommen Patchwork: https://patchwork.freedesktop.org/patch/721342/ Message-ID: <20260428073558.1234238-1-nichen@iscas.ac.cn> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c index 487c2736f2b3..186a73c0b99c 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c @@ -289,6 +289,8 @@ static int a8xx_hfi_send_perf_table(struct a6xx_gmu *gmu) (gmu->nr_gpu_freqs * num_gx_votes * sizeof(gmu->gx_arc_votes[0])) + (gmu->nr_gmu_freqs * num_cx_votes * sizeof(gmu->cx_arc_votes[0])); tbl = kzalloc(size, GFP_KERNEL); + if (!tbl) + return -ENOMEM; tbl->type = HFI_TABLE_GPU_PERF; /* First fill GX votes */ -- cgit v1.2.3 From 50030d63b4d3deda4cbea85bb43cfc1785267621 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 13 May 2026 17:04:48 +0200 Subject: driver core: platform: remove software node on release() If we pass a software node to a newly created device using struct platform_device_info, it will not be removed when the device is released. This may happen when a module creating the device is removed or on failure in platform_device_add(). When we try to reuse that software node in a subsequent call to platform_device_register_full(), it will fail with -EBUSY. Provide a wrapper around the existing platform_device_release() that additionally calls device_remove_software_node() and use it to replace the former if we end up adding a software node. While at it: check all three possible situations in which two software nodes for a single platform device can be created/assigned in platform_device_register_full() and bail-out early. Fixes: 0fc434bc2c45 ("driver core: platform: allow attaching software nodes when creating devices") Signed-off-by: Bartosz Golaszewski Link: https://patch.msgid.link/20260513-swnode-remove-on-dev-unreg-v6-1-f9c58939df27@oss.qualcomm.com Signed-off-by: Danilo Krummrich --- drivers/base/platform.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 75b4698d0e58..a19dd22deef2 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -606,6 +606,12 @@ static void platform_device_release(struct device *dev) kfree(pa); } +static void platform_device_release_full(struct device *dev) +{ + device_remove_software_node(dev); + platform_device_release(dev); +} + /** * platform_device_alloc - create a platform device * @name: base name of the device we're adding @@ -848,7 +854,13 @@ struct platform_device *platform_device_register_full(const struct platform_devi int ret; struct platform_device *pdev; - if (pdevinfo->swnode && pdevinfo->properties) + /* + * Only one software node per device is allowed. Make sure we don't + * accept or create two. + */ + if ((pdevinfo->swnode && pdevinfo->properties) || + (pdevinfo->swnode && is_software_node(pdevinfo->fwnode)) || + (pdevinfo->properties && is_software_node(pdevinfo->fwnode))) return ERR_PTR(-EINVAL); pdev = platform_device_alloc(pdevinfo->name, pdevinfo->id); @@ -878,6 +890,8 @@ struct platform_device *platform_device_register_full(const struct platform_devi ret = device_add_software_node(&pdev->dev, pdevinfo->swnode); if (ret) goto err; + + pdev->dev.release = platform_device_release_full; } else if (pdevinfo->properties) { ret = device_create_managed_software_node(&pdev->dev, pdevinfo->properties, NULL); -- cgit v1.2.3 From 57cf4e8d6a57dc2ef5810f4852a23ba4c71b74bb Mon Sep 17 00:00:00 2001 From: Saurav Sachidanand Date: Thu, 7 May 2026 22:11:44 +0000 Subject: i2c: tegra: fix pm_runtime leak on mutex_lock failure If tegra_i2c_mutex_lock() fails, the function returns without calling pm_runtime_put(), leaking the runtime PM reference acquired by the preceding pm_runtime_get_sync(). This prevents the device from ever entering runtime suspend. Add the missing pm_runtime_put() before returning on lock failure. Fixes: 6077cfd716fb ("i2c: tegra: Add support for SW mutex register") Signed-off-by: Saurav Sachidanand Cc: # v7.0+ Reviewed-by: Jon Hunter Acked-by: Thierry Reding Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260507221145.62183-2-sauravsc@amazon.com --- drivers/i2c/busses/i2c-tegra.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 9fd5ade774a0..c24b8de0a9c7 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -1666,8 +1666,10 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], } ret = tegra_i2c_mutex_lock(i2c_dev); - if (ret) + if (ret) { + pm_runtime_put(i2c_dev->dev); return ret; + } for (i = 0; i < num; i++) { enum msg_end_type end_type = MSG_END_STOP; -- cgit v1.2.3 From 30792d12842901f5276f466a960962d5bfa15cc8 Mon Sep 17 00:00:00 2001 From: Saurav Sachidanand Date: Thu, 7 May 2026 22:11:45 +0000 Subject: i2c: tegra: make tegra_i2c_mutex_unlock() return void tegra_i2c_mutex_unlock() returning an error that overwrites the transfer result causes silent loss of I2C transfer errors. If the transfer failed but the unlock succeeded, the error was lost and the function incorrectly reported success. Rather than propagating the unlock error (which is not actionable by the caller - the I2C message may have been sent regardless), convert the function to return void and WARN on the unexpected condition. If the unlock fails, subsequent lock attempts will fail anyway, making the error visible on the next transfer. Fixes: 6077cfd716fb ("i2c: tegra: Add support for SW mutex register") Signed-off-by: Saurav Sachidanand Cc: # v7.0+ Reviewed-by: Jon Hunter Acked-by: Thierry Reding Signed-off-by: Andi Shyti Link: https://lore.kernel.org/r/20260507221145.62183-3-sauravsc@amazon.com --- drivers/i2c/busses/i2c-tegra.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index c24b8de0a9c7..479a1667e88d 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -589,25 +589,22 @@ static int tegra_i2c_mutex_lock(struct tegra_i2c_dev *i2c_dev) return ret; } -static int tegra_i2c_mutex_unlock(struct tegra_i2c_dev *i2c_dev) +static void tegra_i2c_mutex_unlock(struct tegra_i2c_dev *i2c_dev) { unsigned int reg = i2c_dev->hw->regs->sw_mutex; u32 val, id; if (!i2c_dev->hw->has_mutex) - return 0; + return; val = readl(i2c_dev->base + reg); id = FIELD_GET(I2C_SW_MUTEX_GRANT, val); - if (id && id != I2C_SW_MUTEX_ID_CCPLEX) { - dev_warn(i2c_dev->dev, "unable to unlock mutex, mutex is owned by: %u\n", id); - return -EPERM; - } + if (WARN(id && id != I2C_SW_MUTEX_ID_CCPLEX, + "unable to unlock mutex, mutex is owned by: %u\n", id)) + return; writel(0, i2c_dev->base + reg); - - return 0; } static void tegra_i2c_mask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask) @@ -1700,7 +1697,7 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], break; } - ret = tegra_i2c_mutex_unlock(i2c_dev); + tegra_i2c_mutex_unlock(i2c_dev); pm_runtime_put(i2c_dev->dev); return ret ?: i; -- cgit v1.2.3 From 63451de16e0a08be40f9ab5e7c5c8f5c79676fb1 Mon Sep 17 00:00:00 2001 From: Sunny Patel Date: Sat, 25 Apr 2026 19:05:27 +0530 Subject: mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page When check_stable_address_space() fails after the PMD spinlock has been acquired via pmd_lock(), the code jumps directly to the abort label, bypassing the spin_unlock() call in unlock_abort. This causes the PMD spinlock to be permanently held, leading to a deadlock. Change the goto target from abort to unlock_abort to ensure the spinlock is always released on this error path. Link: https://lore.kernel.org/20260425133537.17463-1-nueralspacetech@gmail.com Fixes: a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages") Signed-off-by: Sunny Patel Reviewed-by: Andrew Morton Acked-by: Zi Yan Acked-by: Balbir Singh Acked-by: David Hildenbrand (Arm) Cc: Alistair Popple Cc: Byungchul Park Cc: Gregory Price Cc: "Huang, Ying" Cc: Joshua Hahn Cc: Matthew Brost Cc: Rakie Kim Cc: Signed-off-by: Andrew Morton --- mm/migrate_device.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/migrate_device.c b/mm/migrate_device.c index fbfe5715f635..ab49d4dcdb60 100644 --- a/mm/migrate_device.c +++ b/mm/migrate_device.c @@ -850,7 +850,7 @@ static int migrate_vma_insert_huge_pmd_page(struct migrate_vma *migrate, ptl = pmd_lock(vma->vm_mm, pmdp); csa_ret = check_stable_address_space(vma->vm_mm); if (csa_ret) - goto abort; + goto unlock_abort; /* * Check for userfaultfd but do not deliver the fault. Instead, -- cgit v1.2.3 From d4e7b5c4cc353f154d5ab8bb2e1ce7714d77a6e9 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Sun, 26 Apr 2026 10:36:12 -0700 Subject: mm/damon/sysfs-schemes: call missing mem_cgroup_iter_break() damon_sysfs_memcg_path_to_id() breaks mem_cgroup_iter() loop without calling mem_cgroup_iter_break(). This leaks the cgroup reference. Fix the issue by calling mem_cgroup_iter_break() before the break. The issue was discovered [1] by Sashiko. Link: https://lore.kernel.org/20260426173625.86521-1-sj@kernel.org Link: https://lore.kernel.org/20260423004148.74722-1-sj@kernel.org [1] Fixes: 29cbb9a13f05 ("mm/damon/sysfs-schemes: implement scheme filters") Signed-off-by: SeongJae Park Cc: # 6.3.x Signed-off-by: Andrew Morton --- mm/damon/sysfs-schemes.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/damon/sysfs-schemes.c b/mm/damon/sysfs-schemes.c index 245d63808411..04746cbb3327 100644 --- a/mm/damon/sysfs-schemes.c +++ b/mm/damon/sysfs-schemes.c @@ -2594,6 +2594,7 @@ static int damon_sysfs_memcg_path_to_id(char *memcg_path, u64 *id) if (damon_sysfs_memcg_path_eq(memcg, path, memcg_path)) { *id = mem_cgroup_id(memcg); found = true; + mem_cgroup_iter_break(NULL, memcg); break; } } -- cgit v1.2.3 From 620072fd783290ad92c2d445a47b0a61b161f352 Mon Sep 17 00:00:00 2001 From: SeongJae Park Date: Sun, 26 Apr 2026 12:31:17 -0700 Subject: mm/damon: fix damos_stat tracepoint format for sz_applied The print format is wrongly marking sz_applied as sz_tried. Fix it. Link: https://lore.kernel.org/20260426193119.88095-1-sj@kernel.org Fixes: 804c26b961da ("mm/damon/core: add trace point for damos stat per apply interval") Signed-off-by: SeongJae Park Cc: "Masami Hiramatsu (Google)" Cc: Mathieu Desnoyers Cc: Steven Rostedt Cc: # 7.0.x Signed-off-by: Andrew Morton --- include/trace/events/damon.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/trace/events/damon.h b/include/trace/events/damon.h index 24fc402ab3c8..7e25f4469b81 100644 --- a/include/trace/events/damon.h +++ b/include/trace/events/damon.h @@ -41,7 +41,7 @@ TRACE_EVENT(damos_stat_after_apply_interval, ), TP_printk("ctx_idx=%u scheme_idx=%u nr_tried=%lu sz_tried=%lu " - "nr_applied=%lu sz_tried=%lu sz_ops_filter_passed=%lu " + "nr_applied=%lu sz_applied=%lu sz_ops_filter_passed=%lu " "qt_exceeds=%lu nr_snapshots=%lu", __entry->context_idx, __entry->scheme_idx, __entry->nr_tried, __entry->sz_tried, -- cgit v1.2.3 From c416aee7e7d04fec2d2d30786b3c8393108b85d2 Mon Sep 17 00:00:00 2001 From: Illia Ostapyshyn Date: Mon, 27 Apr 2026 16:24:47 +0200 Subject: scripts/gdb: mm: cast untyped symbols in x86_page_ops The symbols phys_base, _text, and _end, used in x86_page_ops are either defined in assembly or implicitly by the linker. Thus, they lack type information and cause a conversion error after gdb.parse_and_eval. Explicitly cast these expressions to unsigned long. Link: https://lore.kernel.org/20260427142448.666117-2-illia@yshyn.com Fixes: 55f8b4518d14 ("scripts/gdb: implement x86_page_ops in mm.py") Signed-off-by: Illia Ostapyshyn Cc: Florian Fainelli Cc: Jan Kiszka Cc: Kieran Bingham Cc: Vlastimil Babka Cc: Hao Li Cc: Harry Yoo Cc: Seongjun Hong Cc: Signed-off-by: Andrew Morton --- scripts/gdb/linux/mm.py | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/scripts/gdb/linux/mm.py b/scripts/gdb/linux/mm.py index d78908f6664d..dffadccbb01d 100644 --- a/scripts/gdb/linux/mm.py +++ b/scripts/gdb/linux/mm.py @@ -40,11 +40,11 @@ class x86_page_ops(): self.PAGE_OFFSET = int(gdb.parse_and_eval("page_offset_base")) self.VMEMMAP_START = int(gdb.parse_and_eval("vmemmap_base")) - self.PHYS_BASE = int(gdb.parse_and_eval("phys_base")) + self.PHYS_BASE = int(gdb.parse_and_eval("(unsigned long) phys_base")) self.START_KERNEL_map = 0xffffffff80000000 - self.KERNEL_START = gdb.parse_and_eval("_text") - self.KERNEL_END = gdb.parse_and_eval("_end") + self.KERNEL_START = gdb.parse_and_eval("(unsigned long) &_text") + self.KERNEL_END = gdb.parse_and_eval("(unsigned long) &_end") self.VMALLOC_START = int(gdb.parse_and_eval("vmalloc_base")) if self.VMALLOC_START == 0xffffc90000000000: -- cgit v1.2.3 From 228e25e33325865ebe589da5366449a8ecf7d0da Mon Sep 17 00:00:00 2001 From: Illia Ostapyshyn Date: Mon, 27 Apr 2026 16:24:48 +0200 Subject: scripts/gdb: slab: update field names of struct kmem_cache The commit 5ba6bc27b1f9 ("slab: decouple pointer to barn from kmem_cache_node") reorganized the struct kmem_cache to factor out the per-node fields to the new struct kmem_cache_per_node_ptrs. This causes the gdb scripts for lx-slabinfo and lx-slabtrace fail as they still reference the old structure. Adjust the gdb scripts to match the current state of struct kmem_cache. Link: https://lore.kernel.org/20260427142448.666117-3-illia@yshyn.com Fixes: 5ba6bc27b1f9 ("slab: decouple pointer to barn from kmem_cache_node") Signed-off-by: Illia Ostapyshyn Acked-by: Harry Yoo (Oracle) Acked-by: Vlastimil Babka (SUSE) Cc: Florian Fainelli Cc: Hao Li Cc: Jan Kiszka Cc: Kieran Bingham Cc: Seongjun Hong Signed-off-by: Andrew Morton --- scripts/gdb/linux/slab.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/gdb/linux/slab.py b/scripts/gdb/linux/slab.py index 0e2d93867fe2..ddde25aeca8d 100644 --- a/scripts/gdb/linux/slab.py +++ b/scripts/gdb/linux/slab.py @@ -196,7 +196,7 @@ def slabtrace(alloc, cache_name): if target_cache['flags'] & SLAB_STORE_USER: for i in range(0, nr_node_ids): - cache_node = target_cache['node'][i] + cache_node = target_cache['per_node']['node'][i] if cache_node['nr_slabs']['counter'] == 0: continue process_slab(loc_track, cache_node['partial'], alloc, target_cache) @@ -300,7 +300,7 @@ def slabinfo(): nr_free = 0 nr_slabs = 0 for i in range(0, nr_node_ids): - cache_node = cache['node'][i] + cache_node = cache['per_node']['node'][i] try: nr_slabs += cache_node['nr_slabs']['counter'] nr_objs = int(cache_node['total_objects']['counter']) -- cgit v1.2.3 From 3432cbb291aabf85f8af4b9d1ec37179168ff999 Mon Sep 17 00:00:00 2001 From: Luiz Capitulino Date: Mon, 27 Apr 2026 12:03:51 -0400 Subject: selftests/mm: run_vmtests.sh: fix destructive tests invocation Destructive tests should be invoked with -d command-line option, but this won't work today since 'd' is missing in getopts command-line. This commit fixes it. Link: https://lore.kernel.org/214fd9e4-5398-4c26-859e-c982c2e277c3@redhat.com Fixes: f16ff3b692ad ("selftests/mm: run_vmtests.sh: add missing tests") Signed-off-by: Luiz Capitulino Reviewed-by: Mike Rapoport (Microsoft) Reviewed-by: SeongJae Park Cc: David Hildenbrand Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Michal Hocko Cc: Shuah Khan Cc: Suren Baghdasaryan Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/run_vmtests.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index d8468451b3a3..c17b133a81d2 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -103,7 +103,7 @@ RUN_ALL=false RUN_DESTRUCTIVE=false TAP_PREFIX="# " -while getopts "aht:n" OPT; do +while getopts "aht:nd" OPT; do case ${OPT} in "a") RUN_ALL=true ;; "h") usage ;; -- cgit v1.2.3 From 77dcdff56d0b52947f110e9e43a1fc846ee8d94a Mon Sep 17 00:00:00 2001 From: "Mike Rapoport (Microsoft)" Date: Tue, 28 Apr 2026 15:48:32 +0300 Subject: MAINTAINERS: add tree for KDUMP and KEXEC Patch series "MAINTAINERS: update KEXEC, KDUMP and LIVE UPDATE". KHO and LiveUpdate team is going to pick kdump and kexec patches to their tree at https://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux.git Update MAINTAINERS to reflect this change and add kexec@ list to LIVE UPDATE entry. This patch (of 2): KHO and LiveUpdate team is going to pick kdump and kexec patches to their tree at https://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux.git Update MAINTAINERS to reflect it. Link: https://lore.kernel.org/20260428124833.1903302-1-rppt@kernel.org Link: https://lore.kernel.org/20260428124833.1903302-2-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) Acked-by: Pasha Tatashin Acked-by: Baoquan He Acked-by: Pratyush Yadav Cc: Mike Rapoport Cc: Dave Young Cc: Eric W. Biederman Signed-off-by: Andrew Morton --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index b2040011a386..44833dc85827 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13863,6 +13863,7 @@ M: Pratyush Yadav R: Dave Young L: kexec@lists.infradead.org S: Maintained +T: git git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux.git F: Documentation/admin-guide/kdump/ F: fs/proc/vmcore.c F: include/linux/crash_core.h @@ -14179,6 +14180,7 @@ M: Pasha Tatashin M: Pratyush Yadav L: kexec@lists.infradead.org W: http://kernel.org/pub/linux/utils/kernel/kexec/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux.git F: include/linux/kexec.h F: include/uapi/linux/kexec.h F: kernel/kexec* -- cgit v1.2.3 From ec9f2ee9a4046b2d5e5a6b6fa6a2ed1542250e73 Mon Sep 17 00:00:00 2001 From: "Mike Rapoport (Microsoft)" Date: Tue, 28 Apr 2026 15:48:33 +0300 Subject: MAINTAINERS: add kexec@ list to LIVE UPDATE ENTRY Link: https://lore.kernel.org/20260428124833.1903302-3-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) Acked-by: Pasha Tatashin Acked-by: Baoquan He Cc: Dave Young Cc: Eric W. Biederman Cc: Pratyush Yadav Signed-off-by: Andrew Morton --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 44833dc85827..3a1cc86e2c0a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14897,6 +14897,7 @@ LIVE UPDATE M: Pasha Tatashin M: Mike Rapoport M: Pratyush Yadav +L: kexec@lists.infradead.org L: linux-kernel@vger.kernel.org S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux.git -- cgit v1.2.3 From 6a288a4ddb4a994490505ab5f41c445f8e6b6467 Mon Sep 17 00:00:00 2001 From: "David Hildenbrand (Arm)" Date: Tue, 21 Apr 2026 17:39:07 +0200 Subject: mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free __GFP_ZEROTAGS semantics are currently a bit weird, but effectively this flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN. If we run with init_on_free, we will zero out pages during __free_pages_prepare(), to skip zeroing on the allocation path. However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will consequently not only skip clearing page content, but also skip clearing tag memory. Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that will get mapped to user space through set_pte_at() later: set_pte_at() and friends will detect that the tags have not been initialized yet (PG_mte_tagged not set), and initialize them. However, for the huge zero folio, which will be mapped through a PMD marked as special, this initialization will not be performed, ending up exposing whatever tags were still set for the pages. The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state that allocation tags are set to 0 when a page is first mapped to user space. That no longer holds with the huge zero folio when init_on_free is enabled. Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to tag_clear_highpages() whether we want to also clear page content. Invert the meaning of the tag_clear_highpages() return value to have clearer semantics. Reproduced with the huge zero folio by modifying the check_buffer_fill arm64/mte selftest to use a 2 MiB area, after making sure that pages have a non-0 tag set when freeing (note that, during boot, we will not actually initialize tags, but only set KASAN_TAG_KERNEL in the page flags). $ ./check_buffer_fill 1..20 ... not ok 17 Check initial tags with private mapping, sync error mode and mmap memory not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory ... This code needs more cleanups; we'll tackle that next, like decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN. [akpm@linux-foundation.org: s/__GPF_ZERO/__GFP_ZERO/, per David] Link: https://lore.kernel.org/20260421-zerotags-v2-1-05cb1035482e@kernel.org Fixes: adfb6609c680 ("mm/huge_memory: initialise the tags of the huge zero folio") Signed-off-by: David Hildenbrand (Arm) Reviewed-by: Catalin Marinas Tested-by: Lance Yang Cc: Brendan Jackman Cc: Dev Jain Cc: Johannes Weiner Cc: Liam Howlett Cc: Lorenzo Stoakes (Oracle) Cc: Mark Brown Cc: Michal Hocko Cc: Mike Rapoport Cc: Ryan Roberts Cc: Suren Baghdasaryan Cc: Will Deacon Cc: Zi Yan Cc: Signed-off-by: Andrew Morton --- arch/arm64/include/asm/page.h | 2 +- arch/arm64/mm/fault.c | 11 +++++++---- include/linux/gfp_types.h | 10 +++++----- include/linux/highmem.h | 7 ++++--- mm/page_alloc.c | 8 ++++---- 5 files changed, 21 insertions(+), 17 deletions(-) diff --git a/arch/arm64/include/asm/page.h b/arch/arm64/include/asm/page.h index e25d0d18f6d7..58200de8a221 100644 --- a/arch/arm64/include/asm/page.h +++ b/arch/arm64/include/asm/page.h @@ -33,7 +33,7 @@ struct folio *vma_alloc_zeroed_movable_folio(struct vm_area_struct *vma, unsigned long vaddr); #define vma_alloc_zeroed_movable_folio vma_alloc_zeroed_movable_folio -bool tag_clear_highpages(struct page *to, int numpages); +bool tag_clear_highpages(struct page *to, int numpages, bool clear_pages); #define __HAVE_ARCH_TAG_CLEAR_HIGHPAGES #define copy_user_page(to, from, vaddr, pg) copy_page(to, from) diff --git a/arch/arm64/mm/fault.c b/arch/arm64/mm/fault.c index 0f3c5c7ca054..739800835920 100644 --- a/arch/arm64/mm/fault.c +++ b/arch/arm64/mm/fault.c @@ -1018,7 +1018,7 @@ struct folio *vma_alloc_zeroed_movable_folio(struct vm_area_struct *vma, return vma_alloc_folio(flags, 0, vma, vaddr); } -bool tag_clear_highpages(struct page *page, int numpages) +bool tag_clear_highpages(struct page *page, int numpages, bool clear_pages) { /* * Check if MTE is supported and fall back to clear_highpage(). @@ -1026,13 +1026,16 @@ bool tag_clear_highpages(struct page *page, int numpages) * post_alloc_hook() will invoke tag_clear_highpages(). */ if (!system_supports_mte()) - return false; + return clear_pages; /* Newly allocated pages, shouldn't have been tagged yet */ for (int i = 0; i < numpages; i++, page++) { WARN_ON_ONCE(!try_page_mte_tagging(page)); - mte_zero_clear_page_tags(page_address(page)); + if (clear_pages) + mte_zero_clear_page_tags(page_address(page)); + else + mte_clear_page_tags(page_address(page)); set_page_mte_tagged(page); } - return true; + return false; } diff --git a/include/linux/gfp_types.h b/include/linux/gfp_types.h index 6c75df30a281..cd4972a7c97c 100644 --- a/include/linux/gfp_types.h +++ b/include/linux/gfp_types.h @@ -273,11 +273,11 @@ enum { * * %__GFP_ZERO returns a zeroed page on success. * - * %__GFP_ZEROTAGS zeroes memory tags at allocation time if the memory itself - * is being zeroed (either via __GFP_ZERO or via init_on_alloc, provided that - * __GFP_SKIP_ZERO is not set). This flag is intended for optimization: setting - * memory tags at the same time as zeroing memory has minimal additional - * performance impact. + * %__GFP_ZEROTAGS zeroes memory tags at allocation time. Setting memory tags at + * the same time as zeroing memory (e.g., with __GFP_ZERO) has minimal + * additional performance impact. However, __GFP_ZEROTAGS also zeroes the tags + * even if memory is not getting zeroed at allocation time (e.g., + * with init_on_free). * * %__GFP_SKIP_KASAN makes KASAN skip unpoisoning on page allocation. * Used for userspace and vmalloc pages; the latter are unpoisoned by diff --git a/include/linux/highmem.h b/include/linux/highmem.h index af03db851a1d..d7aac9de1c8a 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -347,10 +347,11 @@ static inline void clear_highpage_kasan_tagged(struct page *page) #ifndef __HAVE_ARCH_TAG_CLEAR_HIGHPAGES -/* Return false to let people know we did not initialize the pages */ -static inline bool tag_clear_highpages(struct page *page, int numpages) +/* Returns true if the caller has to initialize the pages */ +static inline bool tag_clear_highpages(struct page *page, int numpages, + bool clear_pages) { - return false; + return clear_pages; } #endif diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 227d58dc3de6..23c7298d3be2 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1808,9 +1808,9 @@ static inline bool should_skip_init(gfp_t flags) inline void post_alloc_hook(struct page *page, unsigned int order, gfp_t gfp_flags) { + const bool zero_tags = gfp_flags & __GFP_ZEROTAGS; bool init = !want_init_on_free() && want_init_on_alloc(gfp_flags) && !should_skip_init(gfp_flags); - bool zero_tags = init && (gfp_flags & __GFP_ZEROTAGS); int i; set_page_private(page, 0); @@ -1832,11 +1832,11 @@ inline void post_alloc_hook(struct page *page, unsigned int order, */ /* - * If memory tags should be zeroed - * (which happens only when memory should be initialized as well). + * Clearing tags can efficiently clear the memory for us as well, if + * required. */ if (zero_tags) - init = !tag_clear_highpages(page, 1 << order); + init = tag_clear_highpages(page, 1 << order, /* clear_pages= */init); if (!should_skip_kasan_unpoison(gfp_flags) && kasan_unpoison_pages(page, order, init)) { -- cgit v1.2.3 From efdadbc180e53fe257a6e85f6bc706cb58088653 Mon Sep 17 00:00:00 2001 From: "Christian A. Ehrhardt" Date: Tue, 21 Apr 2026 09:07:07 +0200 Subject: lib: kunit_iov_iter: fix test fail on powerpc Increase buffer size to accommodate machines with 64K PAGE_SIZE. Link: https://lore.kernel.org/20260421070707.992873-1-lk@c--e.de Fixes: 0913b7554726 ("lib: kunit_iov_iter: add tests for extract_iter_to_sg") Signed-off-by: Christian A. Ehrhardt Reported-by: David Gow Closes: https://lore.kernel.org/34a81ec2-af84-465d-9b5e-7bb5bf01680f@davidgow.net Tested-by: David Gow Tested-by: Josh Law Reviewed-by: Josh Law Signed-off-by: Andrew Morton --- lib/tests/kunit_iov_iter.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/lib/tests/kunit_iov_iter.c b/lib/tests/kunit_iov_iter.c index 37bd6eb25896..f02f7b7aa796 100644 --- a/lib/tests/kunit_iov_iter.c +++ b/lib/tests/kunit_iov_iter.c @@ -1128,7 +1128,7 @@ static void __init iov_kunit_iter_to_sg_kvec(struct kunit *test) struct kvec kvec; size_t bufsize; - bufsize = 0x100000; + bufsize = 0x200000; iov_kunit_iter_to_sg_init(test, bufsize, false, &data); kvec.iov_base = data.buffer; @@ -1146,7 +1146,7 @@ static void __init iov_kunit_iter_to_sg_bvec(struct kunit *test) struct bio_vec *bvec; struct iov_iter iter; - bufsize = 0x100000; + bufsize = 0x200000; iov_kunit_iter_to_sg_init(test, bufsize, false, &data); bvec = kunit_kmalloc_array(test, data.npages, sizeof(*bvec), @@ -1173,7 +1173,7 @@ static void __init iov_kunit_iter_to_sg_folioq(struct kunit *test) struct iov_iter iter; size_t bufsize; - bufsize = 0x100000; + bufsize = 0x200000; iov_kunit_iter_to_sg_init(test, bufsize, false, &data); folioq = iov_kunit_create_folioq(test); @@ -1190,7 +1190,7 @@ static void __init iov_kunit_iter_to_sg_xarray(struct kunit *test) struct iov_iter iter; size_t bufsize; - bufsize = 0x100000; + bufsize = 0x200000; iov_kunit_iter_to_sg_init(test, bufsize, false, &data); xarray = iov_kunit_create_xarray(test); @@ -1206,7 +1206,7 @@ static void __init iov_kunit_iter_to_sg_ubuf(struct kunit *test) struct iov_iter iter; size_t bufsize; - bufsize = 0x100000; + bufsize = 0x200000; iov_kunit_iter_to_sg_init(test, bufsize, true, &data); iov_iter_ubuf(&iter, READ, data.ubuf, bufsize); -- cgit v1.2.3 From 93866f55f7e292fe3d47d36c9efe5ee10213a06b Mon Sep 17 00:00:00 2001 From: Muchun Song Date: Tue, 28 Apr 2026 16:52:17 +0800 Subject: mm/memory_hotplug: fix memory block reference leak on remove Patch series "mm: Fix memory block leaks and locking", v2. This series fixes two memory block device reference leaks and one locking issue around the per-memory_block hwpoison counter. This patch (of 2): remove_memory_blocks_and_altmaps() looks up each memory block with find_memory_block(), which acquires a reference to the memory block device. That reference is never dropped on this path, resulting in a leaked device reference when removing memory blocks and their altmaps. Drop the reference after retrieving mem->altmap and clearing mem->altmap, before removing the memory block device. Link: https://lore.kernel.org/20260428085219.1316047-1-songmuchun@bytedance.com Link: https://lore.kernel.org/20260428085219.1316047-2-songmuchun@bytedance.com Fixes: 6b8f0798b85a ("mm/memory_hotplug: split memmap_on_memory requests across memblocks") Signed-off-by: Muchun Song Acked-by: Oscar Salvador Acked-by: David Hildenbrand (Arm) Cc: Danilo Krummrich Cc: Greg Kroah-Hartman Cc: "Huang, Ying" Cc: Miaohe Lin Cc: Naoya Horiguchi Cc: "Rafael J. Wysocki" Cc: Vishal Verma Cc: Signed-off-by: Andrew Morton --- mm/memory_hotplug.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 2a943ec57c85..40c7915dabe0 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1422,6 +1422,8 @@ static void remove_memory_blocks_and_altmaps(u64 start, u64 size) altmap = mem->altmap; mem->altmap = NULL; + /* drop the ref. we got via find_memory_block() */ + put_device(&mem->dev); remove_memory_block_devices(cur_start, memblock_size); -- cgit v1.2.3 From 03a2cc1756a0570f887d624cd6c535ea0cbd4951 Mon Sep 17 00:00:00 2001 From: Muchun Song Date: Tue, 28 Apr 2026 16:52:18 +0800 Subject: drivers/base/memory: fix memory block reference leak in poison accounting memblk_nr_poison_inc() and memblk_nr_poison_sub() look up a memory block via find_memory_block_by_id(), which acquires a reference to the memory block device. Both helpers use the returned memory block without dropping that reference, leaking the device reference on each successful lookup. Drop the reference after updating nr_hwpoison. Link: https://lore.kernel.org/20260428085219.1316047-3-songmuchun@bytedance.com Fixes: 5033091de814 ("mm/hwpoison: introduce per-memory_block hwpoison counter") Signed-off-by: Muchun Song Reviewed-by: Miaohe Lin Acked-by: Oscar Salvador Acked-by: David Hildenbrand (Arm) Cc: Danilo Krummrich Cc: Greg Kroah-Hartman Cc: "Huang, Ying" Cc: Naoya Horiguchi Cc: "Rafael J. Wysocki" Cc: Vishal Verma Cc: Signed-off-by: Andrew Morton --- drivers/base/memory.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/base/memory.c b/drivers/base/memory.c index f806a683b767..6981b55d582a 100644 --- a/drivers/base/memory.c +++ b/drivers/base/memory.c @@ -1230,8 +1230,10 @@ void memblk_nr_poison_inc(unsigned long pfn) const unsigned long block_id = pfn_to_block_id(pfn); struct memory_block *mem = find_memory_block_by_id(block_id); - if (mem) + if (mem) { atomic_long_inc(&mem->nr_hwpoison); + put_device(&mem->dev); + } } void memblk_nr_poison_sub(unsigned long pfn, long i) @@ -1239,8 +1241,10 @@ void memblk_nr_poison_sub(unsigned long pfn, long i) const unsigned long block_id = pfn_to_block_id(pfn); struct memory_block *mem = find_memory_block_by_id(block_id); - if (mem) + if (mem) { atomic_long_sub(i, &mem->nr_hwpoison); + put_device(&mem->dev); + } } static unsigned long memblk_nr_poison(struct memory_block *mem) -- cgit v1.2.3 From c0c6ccd9828c3a1950623b546fa57292a77b5c73 Mon Sep 17 00:00:00 2001 From: "David Hildenbrand (Arm)" Date: Thu, 30 Apr 2026 13:31:22 +0200 Subject: mm: fix __vm_normal_page() to handle missing support for pmd_special()/pud_special() On x86 32-bit with THP enabled, zap_huge_pmd() is seen to generate a "WARNING: mm/memory.c:735 at __vm_normal_page+0x6a/0x7d", from the VM_WARN_ON_ONCE(is_zero_pfn(pfn) || is_huge_zero_pfn(pfn)); followed by "BUG: Bad rss-counter state"s, then later "BUG: Bad page state"s when reclaim gets to call shrink_huge_zero_folio_scan(). It's as if the _PAGE_SPECIAL bit never got set in the huge_zero pmd: and indeed, whereas pte_special() and pte_mkspecial() are subject to a dedicated CONFIG_ARCH_HAS_PTE_SPECIAL, pmd_special() and pmd_mkspecial() are subject to CONFIG_ARCH_SUPPORTS_PMD_PFNMAP, which is never enabled on any 32-bit architecture. While the problem was exposed through commit d80a9cb1a64a ("mm/huge_memory: add and use normal_or_softleaf_folio_pmd()"), it was an oversight in commit af38538801c6 ("mm/memory: factor out common code from vm_normal_page_*()") and would result in other problems: * huge zero folio accounted in smaps, pagemap (PAGE_IS_FILE) and numamaps as file-backed THP * folio_walk_start() returning the folio even without FW_ZEROPAGE set. Callers seem to tolerate that, though. ... and triggering the VM_WARN_ON_ONE(), although never reported so far. To fix it, teach vm_normal_page_pmd()/vm_normal_page_pud() to consider whether pmd_special/pud_special is actually implemented. Link: https://lore.kernel.org/20260430-pmd_special-v1-1-dbcbcfd72c20@kernel.org Fixes: af38538801c6 ("mm/memory: factor out common code from vm_normal_page_*()") Signed-off-by: David Hildenbrand (Arm) Reported-by: Hugh Dickins Closes: https://lore.kernel.org/r/74a75b59-2e13-3985-ee99-d5521f39df2a@google.com Reported-by: Bibo Mao Closes: https://lore.kernel.org/r/20260430041121.2839350-1-maobibo@loongson.cn Debugged-by: Hugh Dickins Reviewed-by: Lance Yang Tested-by: Bibo Mao Reviewed-by: Baolin Wang Reviewed-by: Oscar Salvador Reviewed-by: Lorenzo Stoakes Cc: Liam R. Howlett Cc: Michal Hocko Cc: Mike Rapoport Cc: Suren Baghdasaryan Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton --- mm/memory.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/mm/memory.c b/mm/memory.c index ea6568571131..c51ad671b95f 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -612,6 +612,21 @@ static void print_bad_page_map(struct vm_area_struct *vma, dump_stack(); add_taint(TAINT_BAD_PAGE, LOCKDEP_NOW_UNRELIABLE); } + +static inline bool pgtable_level_has_pxx_special(enum pgtable_level level) +{ + switch (level) { + case PGTABLE_LEVEL_PTE: + return IS_ENABLED(CONFIG_ARCH_HAS_PTE_SPECIAL); + case PGTABLE_LEVEL_PMD: + return IS_ENABLED(CONFIG_ARCH_SUPPORTS_PMD_PFNMAP); + case PGTABLE_LEVEL_PUD: + return IS_ENABLED(CONFIG_ARCH_SUPPORTS_PUD_PFNMAP); + default: + return false; + } +} + #define print_bad_pte(vma, addr, pte, page) \ print_bad_page_map(vma, addr, pte_val(pte), page, PGTABLE_LEVEL_PTE) @@ -684,7 +699,7 @@ static inline struct page *__vm_normal_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn, bool special, unsigned long long entry, enum pgtable_level level) { - if (IS_ENABLED(CONFIG_ARCH_HAS_PTE_SPECIAL)) { + if (pgtable_level_has_pxx_special(level)) { if (unlikely(special)) { #ifdef CONFIG_FIND_NORMAL_PAGE if (vma->vm_ops && vma->vm_ops->find_normal_page) @@ -699,8 +714,9 @@ static inline struct page *__vm_normal_page(struct vm_area_struct *vma, return NULL; } /* - * With CONFIG_ARCH_HAS_PTE_SPECIAL, any special page table - * mappings (incl. shared zero folios) are marked accordingly. + * With working pte_special()/pmd_special()..., any special page + * table mappings (incl. shared zero folios) are marked + * accordingly. */ } else { if (unlikely(vma->vm_flags & (VM_PFNMAP | VM_MIXEDMAP))) { -- cgit v1.2.3 From be3f38d05cc5a7c3f13e51994c5dd043ab604d28 Mon Sep 17 00:00:00 2001 From: Alistair Popple Date: Fri, 1 May 2026 16:51:16 +1000 Subject: mm/memory: fix spurious warning when unmapping device-private/exclusive pages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Device private and exclusive entries are only supported for anonymous folios. This condition is tested in __migrate_device_pages() and make_device_exclusive() using folio_test_anon(). However the unmap path tests this assumption using vma_is_anonymous(). This is wrong because whilst anonymous VMAs can only contain folios where folio_test_anon() is true the opposite relation does not hold. A folio for which folio_test_anon() is true does not imply vma_is_anonymous() is true. Such a condition can occur if for example a folio is part of a private filebacked mapping. In this case vma_is_anonymous() is false as the mapping is filebacked, but folio_test_anon() may be true, thus permitting devices to migrate the folio to device private memory. This can lead to the following spurious warnings during process teardown: [ 772.737706] ------------[ cut here ]------------ [ 772.739201] WARNING: mm/memory.c:1754 at unmap_page_range.cold+0x26/0x18a, CPU#17: hmm-tests/2041 [ 772.742050] Modules linked in: test_hmm nvidia_uvm(O) nvidia(O) [ 772.743959] CPU: 17 UID: 0 PID: 2041 Comm: hmm-tests Tainted: G W O 7.0.0+ #387 PREEMPT(full) [ 772.747104] Tainted: [W]=WARN, [O]=OOT_MODULE [ 772.748509] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 772.752117] RIP: 0010:unmap_page_range.cold+0x26/0x18a [ 772.753780] Code: 7e fe ff ff 48 89 4c 24 78 4c 89 44 24 38 e8 f2 ff b1 00 48 8b 4c 24 78 4c 8b 44 24 38 48 8b 44 24 18 48 83 78 48 00 74 04 90 <0f> 0b 90 48 89 ca b8 ff ff 37 00 48 c1 ea 03 48 c1 e0 2a 80 3c 02 [ 772.759602] RSP: 0018:ffff888112607550 EFLAGS: 00010286 [ 772.761310] RAX: ffff88811bbf4dc0 RBX: dffffc0000000000 RCX: ffffea03e9bfffd8 [ 772.763583] RDX: 1ffff1102377e9c1 RSI: 0000000000000008 RDI: ffff88811bbf4e08 [ 772.765914] RBP: 0000000000000006 R08: ffff8881059f7448 R09: ffffed10224c0e68 [ 772.768184] R10: ffff888112607347 R11: 0000000000000001 R12: 0000000000000001 [ 772.770461] R13: ffffea03e9bfffc0 R14: ffff888112607908 R15: ffffea03e9bfffc0 [ 772.772782] FS: 00007f327caa2780(0000) GS:ffff888427b7d000(0000) knlGS:0000000000000000 [ 772.775328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 772.777187] CR2: 00007f327ca89000 CR3: 00000001994d5000 CR4: 00000000000006f0 [ 772.779135] Call Trace: [ 772.779792] [ 772.780317] ? dmirror_interval_invalidate+0x1a3/0x290 [test_hmm] [ 772.781873] ? vm_normal_page_pud+0x2b0/0x2b0 [ 772.782992] ? __rwlock_init+0x150/0x150 [ 772.784006] ? lock_release+0x216/0x2b0 [ 772.785008] ? __mmu_notifier_invalidate_range_start+0x505/0x6e0 [ 772.786522] ? lock_release+0x216/0x2b0 [ 772.787498] ? unmap_single_vma+0xb6/0x210 [ 772.788573] unmap_vmas+0x27d/0x520 [ 772.789506] ? unmap_single_vma+0x210/0x210 [ 772.790607] ? mas_update_gap.part.0+0x620/0x620 [ 772.791834] unmap_region+0x19e/0x350 [ 772.792769] ? remove_vma+0x130/0x130 [ 772.793684] ? mas_alloc_nodes+0x1f2/0x300 [ 772.794730] vms_complete_munmap_vmas+0x8c1/0xe20 [ 772.795926] ? unmap_region+0x350/0x350 [ 772.796917] do_vmi_align_munmap+0x36a/0x4e0 [ 772.798018] ? lock_release+0x216/0x2b0 [ 772.799024] ? vma_shrink+0x620/0x620 [ 772.799983] do_vmi_munmap+0x150/0x2c0 [ 772.800939] __vm_munmap+0x161/0x2c0 [ 772.801872] ? expand_downwards+0xd60/0xd60 [ 772.802948] ? clockevents_program_event+0x1ef/0x540 [ 772.804217] ? lock_release+0x216/0x2b0 [ 772.805158] __x64_sys_munmap+0x59/0x80 [ 772.805776] do_syscall_64+0xfc/0x670 [ 772.806336] ? irqentry_exit+0xda/0x580 [ 772.806976] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 772.807772] RIP: 0033:0x7f327cbb2717 [ 772.808323] Code: 73 01 c3 48 8b 0d f9 76 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 0b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c9 76 0d 00 f7 d8 64 89 01 48 [ 772.811337] RSP: 002b:00007ffde7f57d38 EFLAGS: 00000202 ORIG_RAX: 000000000000000b [ 772.812564] RAX: ffffffffffffffda RBX: 00007f327cc9c000 RCX: 00007f327cbb2717 [ 772.813733] RDX: 0000000000000000 RSI: 0000000000400000 RDI: 00007f327c289000 [ 772.814867] RBP: 0000000000421360 R08: 000000000000001a R09: 0000000000000000 [ 772.815991] R10: 0000000000000003 R11: 0000000000000202 R12: 00007ffde7f57d74 [ 772.817121] R13: 00007f327c689010 R14: 0000000000100000 R15: 00007f327c289000 [ 772.818272] [ 772.818614] irq event stamp: 0 [ 772.819159] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 772.820174] hardirqs last disabled at (0): [] copy_process+0x19f3/0x6440 [ 772.821511] softirqs last enabled at (0): [] copy_process+0x1a40/0x6440 [ 772.822869] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 772.823871] ---[ end trace 0000000000000000 ]--- Fix this by using the same check for folio_test_anon() in zap_nonpresent_ptes(). Also add a hmm-test case for this. Link: https://lore.kernel.org/20260501065116.2057242-1-apopple@nvidia.com Fixes: 999dad824c39 ("mm/shmem: persist uffd-wp bit across zapping for file-backed") Signed-off-by: Alistair Popple Reported-by: Arsen Arsenović Reviewed-by: Balbir Singh Cc: David Hildenbrand Cc: Jason Gunthorpe Cc: John Hubbard Cc: Leon Romanovsky Cc: Liam R. Howlett Cc: Lorenzo Stoakes Cc: Peter Xu Cc: Matthew Brost Cc: Michal Hocko Cc: Mike Rapoport Cc: Shuah Khan Cc: Suren Baghdasaryan Cc: Thomas Hellström Cc: Vlastimil Babka Cc: Signed-off-by: Andrew Morton --- mm/memory.c | 2 +- tools/testing/selftests/mm/hmm-tests.c | 50 ++++++++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+), 1 deletion(-) diff --git a/mm/memory.c b/mm/memory.c index c51ad671b95f..86a973119bd4 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1755,7 +1755,7 @@ static inline int zap_nonpresent_ptes(struct mmu_gather *tlb, * consider uffd-wp bit when zap. For more information, * see zap_install_uffd_wp_if_needed(). */ - WARN_ON_ONCE(!vma_is_anonymous(vma)); + WARN_ON_ONCE(!folio_test_anon(folio)); rss[mm_counter(folio)]--; folio_remove_rmap_pte(folio, page, vma); folio_put(folio); diff --git a/tools/testing/selftests/mm/hmm-tests.c b/tools/testing/selftests/mm/hmm-tests.c index 788689497e92..77fb4c5d871b 100644 --- a/tools/testing/selftests/mm/hmm-tests.c +++ b/tools/testing/selftests/mm/hmm-tests.c @@ -985,6 +985,56 @@ TEST_F(hmm, migrate) hmm_buffer_free(buffer); } +/* + * Migrate private file memory to device private memory. + */ +TEST_F(hmm, migrate_file_private) +{ + struct hmm_buffer *buffer; + unsigned long npages; + unsigned long size; + unsigned long i; + int *ptr; + int ret; + int fd; + + npages = ALIGN(HMM_BUFFER_SIZE, self->page_size) >> self->page_shift; + ASSERT_NE(npages, 0); + size = npages << self->page_shift; + + fd = hmm_create_file(size); + ASSERT_GE(fd, 0); + + buffer = malloc(sizeof(*buffer)); + ASSERT_NE(buffer, NULL); + + buffer->fd = fd; + buffer->size = size; + buffer->mirror = malloc(size); + ASSERT_NE(buffer->mirror, NULL); + + buffer->ptr = mmap(NULL, size, + PROT_READ | PROT_WRITE, + MAP_PRIVATE, + buffer->fd, 0); + ASSERT_NE(buffer->ptr, MAP_FAILED); + + /* Initialize buffer in system memory. */ + for (i = 0, ptr = buffer->ptr; i < size / sizeof(*ptr); ++i) + ptr[i] = i; + + /* Migrate memory to device. */ + ret = hmm_migrate_sys_to_dev(self->fd, buffer, npages); + ASSERT_EQ(ret, 0); + ASSERT_EQ(buffer->cpages, npages); + + /* Check what the device read. */ + for (i = 0, ptr = buffer->mirror; i < size / sizeof(*ptr); ++i) + ASSERT_EQ(ptr[i], i); + + hmm_buffer_free(buffer); +} + /* * Migrate anonymous memory to device private memory and fault some of it back * to system memory, then try migrating the resulting mix of system and device -- cgit v1.2.3 From 67ea9d353d0ba12bdbc9183ff568dead9e949b80 Mon Sep 17 00:00:00 2001 From: Qing Wang Date: Tue, 12 May 2026 11:50:35 +0800 Subject: mm/slub: hold cpus_read_lock around flush_rcu_sheaves_on_cache() flush_rcu_sheaves_on_cache() calls queue_work_on() in a for_each_online_cpu() loop, which requires the cpu to stay online. But cpus_read_lock() is not held in kvfree_rcu_barrier_on_cache() and the set of "online cpus" is subject to change. There are two paths that call flush_rcu_sheaves_on_cache(): // has cpus_read_lock() flush_all_rcu_sheaves() -> flush_rcu_sheaves_on_cache() // no cpus_read_lock() kvfree_rcu_barrier_on_cache() -> flush_rcu_sheaves_on_cache() Fix this by holding cpus_read_lock() in kvfree_rcu_barrier_on_cache(). Why not move cpus_read_lock() from flush_all_rcu_sheaves() into flush_rcu_sheaves_on_cache()? The reason is it would introduce a new lock order (slab_mutex -> cpu_hotplug_lock). The reverse order (cpu_hotplug_lock -> slab_mutex) is established by - cpuhp_setup_state_nocalls(..., slub_cpu_setup, ...) - kmem_cache_destroy() The two orders together would form an AB-BA deadlock. Finally, add lockdep_assert_cpus_held() in flush_rcu_sheaves_on_cache() to catch the same problem in the future. Fixes: 0f35040de593 ("mm/slab: introduce kvfree_rcu_barrier_on_cache() for cache destruction") Cc: Signed-off-by: Qing Wang Link: https://patch.msgid.link/20260512035035.762317-1-wangqing7171@gmail.com Signed-off-by: Vlastimil Babka (SUSE) --- mm/slab_common.c | 2 ++ mm/slub.c | 1 + 2 files changed, 3 insertions(+) diff --git a/mm/slab_common.c b/mm/slab_common.c index d5a70a831a2a..8b661fff5eed 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -2110,7 +2110,9 @@ EXPORT_SYMBOL_GPL(kvfree_rcu_barrier); void kvfree_rcu_barrier_on_cache(struct kmem_cache *s) { if (cache_has_sheaves(s)) { + cpus_read_lock(); flush_rcu_sheaves_on_cache(s); + cpus_read_unlock(); rcu_barrier(); } diff --git a/mm/slub.c b/mm/slub.c index 0baa906f39ab..9ad80b7f601a 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -4024,6 +4024,7 @@ void flush_rcu_sheaves_on_cache(struct kmem_cache *s) struct slub_flush_work *sfw; unsigned int cpu; + lockdep_assert_cpus_held(); mutex_lock(&flush_lock); for_each_online_cpu(cpu) { -- cgit v1.2.3 From e4e9b7b38d5db2cc6a8770bc0596bb8b36b92b1f Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Tue, 12 May 2026 17:19:47 -0500 Subject: cpufreq/amd-pstate: Drop Kconfig option for dynamic EPP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are some performance issues being identified by dynamic EPP and we don't want to have distributions turning it on by default exposing them to users at this time. Drop the kconfig option, and require an explicit opt in from kernel command line or runtime sysfs option to turn it on. Reported-by: Viktor Jägersküpper Closes: https://lore.kernel.org/linux-pm/14a87c99-785c-4b16-bfce-35ecbf053448@freenet.de/ Reported-by: Stuart Meckle Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221473 Signed-off-by: Mario Limonciello Reviewed-by: K Prateek Nayak Link: https://lore.kernel.org/r/20260512221947.1652988-1-mario.limonciello@amd.com (fix sysfs file path) Signed-off-by: Mario Limonciello (AMD) --- Documentation/admin-guide/pm/amd-pstate.rst | 11 +++++------ drivers/cpufreq/Kconfig.x86 | 12 ------------ drivers/cpufreq/amd-pstate.c | 4 ---- 3 files changed, 5 insertions(+), 22 deletions(-) diff --git a/Documentation/admin-guide/pm/amd-pstate.rst b/Documentation/admin-guide/pm/amd-pstate.rst index f8e7050fc762..a95e2ebce005 100644 --- a/Documentation/admin-guide/pm/amd-pstate.rst +++ b/Documentation/admin-guide/pm/amd-pstate.rst @@ -358,9 +358,9 @@ Dynamic energy performance profile The amd-pstate driver supports dynamically selecting the energy performance profile based on whether the machine is running on AC or DC power. -Whether this behavior is enabled by default depends on the kernel -config option `CONFIG_X86_AMD_PSTATE_DYNAMIC_EPP`. This behavior can also be overridden -at runtime by the sysfs file ``/sys/devices/system/cpu/cpufreq/policyX/dynamic_epp``. +Whether this behavior is enabled by default depends on the kernel command line option +``amd_dynamic_epp`` is set. This behavior can also be overridden +at runtime by the sysfs file ``/sys/devices/system/cpu/amd_pstate/dynamic_epp``. When set to enabled, the driver will select a different energy performance profile when the machine is running on battery or AC power. The driver will @@ -485,9 +485,8 @@ kernel parameter ``amd_prefcore=disable``. ``amd_dynamic_epp`` When AMD pstate is in auto mode, dynamic EPP will control whether the kernel -autonomously changes the EPP mode. The default is configured by -``CONFIG_X86_AMD_PSTATE_DYNAMIC_EPP`` but can be explicitly enabled with -``amd_dynamic_epp=enable`` or disabled with ``amd_dynamic_epp=disable``. +autonomously changes the EPP mode. The default is disabled. It can be enabled +with the kernel parameter ``amd_dynamic_epp=enable``. User Space Interface in ``sysfs`` - General =========================================== diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86 index 027e6ea2e038..a9093cd5e5d1 100644 --- a/drivers/cpufreq/Kconfig.x86 +++ b/drivers/cpufreq/Kconfig.x86 @@ -70,18 +70,6 @@ config X86_AMD_PSTATE_DEFAULT_MODE For details, take a look at: . -config X86_AMD_PSTATE_DYNAMIC_EPP - bool "AMD Processor P-State dynamic EPP support" - depends on X86_AMD_PSTATE - default n - help - Allow the kernel to dynamically change the energy performance - value from events like ACPI platform profile and AC adapter plug - events. - - This feature can also be changed at runtime, this configuration - option only sets the kernel default value behavior. - config X86_AMD_PSTATE_UT tristate "selftest for AMD Processor P-State driver" depends on X86 && ACPI_PROCESSOR diff --git a/drivers/cpufreq/amd-pstate.c b/drivers/cpufreq/amd-pstate.c index 9eb9c3f4e809..62b5d995281d 100644 --- a/drivers/cpufreq/amd-pstate.c +++ b/drivers/cpufreq/amd-pstate.c @@ -87,11 +87,7 @@ static struct cpufreq_driver amd_pstate_driver; static struct cpufreq_driver amd_pstate_epp_driver; static int cppc_state = AMD_PSTATE_UNDEFINED; static bool amd_pstate_prefcore = true; -#ifdef CONFIG_X86_AMD_PSTATE_DYNAMIC_EPP -static bool dynamic_epp = CONFIG_X86_AMD_PSTATE_DYNAMIC_EPP; -#else static bool dynamic_epp; -#endif static struct quirk_entry *quirks; /* -- cgit v1.2.3 From e83f5e24da741fa9405aeeff00b08c5ee7c37b88 Mon Sep 17 00:00:00 2001 From: Jiexun Wang Date: Wed, 6 May 2026 19:43:30 +0800 Subject: Bluetooth: serialize accept_q access bt_sock_poll() walks the accept queue without synchronization, while child teardown can unlink the same socket and drop its last reference. The unsynchronized accept queue walk has existed since the initial Bluetooth import. Protect accept_q with a dedicated lock for queue updates and polling. Also rework bt_accept_dequeue() to take temporary child references under the queue lock before dropping it and locking the child socket. Fixes: 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Reported-by: Jann Horn Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Jiexun Wang Signed-off-by: Ren Wei Signed-off-by: Jiexun Wang Reviewed-by: Jann Horn Signed-off-by: Luiz Augusto von Dentz --- include/net/bluetooth/bluetooth.h | 1 + net/bluetooth/af_bluetooth.c | 87 +++++++++++++++++++++++++++++---------- 2 files changed, 66 insertions(+), 22 deletions(-) diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 69eed69f7f26..3faea66b1979 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -398,6 +398,7 @@ void baswap(bdaddr_t *dst, const bdaddr_t *src); struct bt_sock { struct sock sk; struct list_head accept_q; + spinlock_t accept_q_lock; /* protects accept_q */ struct sock *parent; unsigned long flags; void (*skb_msg_name)(struct sk_buff *, void *, int *); diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 33d053d63407..9d68dd86023c 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -154,6 +154,7 @@ struct sock *bt_sock_alloc(struct net *net, struct socket *sock, sock_init_data(sock, sk); INIT_LIST_HEAD(&bt_sk(sk)->accept_q); + spin_lock_init(&bt_sk(sk)->accept_q_lock); sock_reset_flag(sk, SOCK_ZAPPED); @@ -214,6 +215,7 @@ void bt_accept_enqueue(struct sock *parent, struct sock *sk, bool bh) { const struct cred *old_cred; struct pid *old_pid; + struct bt_sock *par = bt_sk(parent); BT_DBG("parent %p, sk %p", parent, sk); @@ -224,9 +226,13 @@ void bt_accept_enqueue(struct sock *parent, struct sock *sk, bool bh) else lock_sock_nested(sk, SINGLE_DEPTH_NESTING); - list_add_tail(&bt_sk(sk)->accept_q, &bt_sk(parent)->accept_q); bt_sk(sk)->parent = parent; + spin_lock_bh(&par->accept_q_lock); + list_add_tail(&bt_sk(sk)->accept_q, &par->accept_q); + sk_acceptq_added(parent); + spin_unlock_bh(&par->accept_q_lock); + /* Copy credentials from parent since for incoming connections the * socket is allocated by the kernel. */ @@ -244,8 +250,6 @@ void bt_accept_enqueue(struct sock *parent, struct sock *sk, bool bh) bh_unlock_sock(sk); else release_sock(sk); - - sk_acceptq_added(parent); } EXPORT_SYMBOL(bt_accept_enqueue); @@ -254,45 +258,72 @@ EXPORT_SYMBOL(bt_accept_enqueue); */ void bt_accept_unlink(struct sock *sk) { + struct sock *parent = bt_sk(sk)->parent; + BT_DBG("sk %p state %d", sk, sk->sk_state); + spin_lock_bh(&bt_sk(parent)->accept_q_lock); list_del_init(&bt_sk(sk)->accept_q); - sk_acceptq_removed(bt_sk(sk)->parent); + sk_acceptq_removed(parent); + spin_unlock_bh(&bt_sk(parent)->accept_q_lock); bt_sk(sk)->parent = NULL; sock_put(sk); } EXPORT_SYMBOL(bt_accept_unlink); +static struct sock *bt_accept_get(struct sock *parent, struct sock *sk) +{ + struct bt_sock *bt = bt_sk(parent); + struct sock *next = NULL; + + /* accept_q is modified from child teardown paths too, so take a + * temporary reference before dropping the queue lock. + */ + spin_lock_bh(&bt->accept_q_lock); + + if (sk) { + if (bt_sk(sk)->parent != parent) + goto out; + + if (!list_is_last(&bt_sk(sk)->accept_q, &bt->accept_q)) { + next = &list_next_entry(bt_sk(sk), accept_q)->sk; + sock_hold(next); + } + } else if (!list_empty(&bt->accept_q)) { + next = &list_first_entry(&bt->accept_q, + struct bt_sock, accept_q)->sk; + sock_hold(next); + } + +out: + spin_unlock_bh(&bt->accept_q_lock); + return next; +} + struct sock *bt_accept_dequeue(struct sock *parent, struct socket *newsock) { - struct bt_sock *s, *n; - struct sock *sk; + struct sock *sk, *next; BT_DBG("parent %p", parent); restart: - list_for_each_entry_safe(s, n, &bt_sk(parent)->accept_q, accept_q) { - sk = (struct sock *)s; - + for (sk = bt_accept_get(parent, NULL); sk; sk = next) { /* Prevent early freeing of sk due to unlink and sock_kill */ - sock_hold(sk); lock_sock(sk); /* Check sk has not already been unlinked via * bt_accept_unlink() due to serialisation caused by sk locking */ - if (!bt_sk(sk)->parent) { + if (bt_sk(sk)->parent != parent) { BT_DBG("sk %p, already unlinked", sk); release_sock(sk); sock_put(sk); - /* Restart the loop as sk is no longer in the list - * and also avoid a potential infinite loop because - * list_for_each_entry_safe() is not thread safe. - */ goto restart; } + next = bt_accept_get(parent, sk); + /* sk is safely in the parent list so reduce reference count */ sock_put(sk); @@ -310,6 +341,8 @@ restart: sock_graft(sk, newsock); release_sock(sk); + if (next) + sock_put(next); return sk; } @@ -518,18 +551,28 @@ EXPORT_SYMBOL(bt_sock_stream_recvmsg); static inline __poll_t bt_accept_poll(struct sock *parent) { - struct bt_sock *s, *n; + struct bt_sock *bt = bt_sk(parent); + struct bt_sock *s; struct sock *sk; + __poll_t mask = 0; + + spin_lock_bh(&bt->accept_q_lock); + list_for_each_entry(s, &bt->accept_q, accept_q) { + int state; - list_for_each_entry_safe(s, n, &bt_sk(parent)->accept_q, accept_q) { sk = (struct sock *)s; - if (sk->sk_state == BT_CONNECTED || - (test_bit(BT_SK_DEFER_SETUP, &bt_sk(parent)->flags) && - sk->sk_state == BT_CONNECT2)) - return EPOLLIN | EPOLLRDNORM; + state = READ_ONCE(sk->sk_state); + + if (state == BT_CONNECTED || + (test_bit(BT_SK_DEFER_SETUP, &bt->flags) && + state == BT_CONNECT2)) { + mask = EPOLLIN | EPOLLRDNORM; + break; + } } + spin_unlock_bh(&bt->accept_q_lock); - return 0; + return mask; } __poll_t bt_sock_poll(struct file *file, struct socket *sock, -- cgit v1.2.3 From e3ac0d9f1a205f33a43fba3b79ef74d2f604c78b Mon Sep 17 00:00:00 2001 From: Pauli Virtanen Date: Fri, 24 Apr 2026 22:24:29 +0300 Subject: Bluetooth: btmtk: accept too short WMT FUNC_CTRL events MT7925 (USB ID 0e8d:e025) on fw version 20260106153314 sends WMT FUNC_CTRL events that are missing the status field. Prior to commit 006b9943b982 ("Bluetooth: btmtk: validate WMT event SKB length before struct access") the status was read from out-of-bounds of SKB data, which usually would result to success with BTMTK_WMT_ON_UNDONE, although I don't know the intent here. The bounds check added in that commit returns with error instead, producing "Bluetooth: hci0: Failed to send wmt func ctrl (-22)" and makes the device unusable. Fix the regression by interpreting too short packet as status BTMTK_WMT_ON_UNDONE, which makes the device work normally again. Fixes: 634a4408c061 ("Bluetooth: btmtk: validate WMT event SKB length before struct access") Signed-off-by: Pauli Virtanen Tested-by: Mikhail Gavrilov # MT7922 (0489:e0e2) Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btmtk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c index f70c1b0f8990..a29f72216c34 100644 --- a/drivers/bluetooth/btmtk.c +++ b/drivers/bluetooth/btmtk.c @@ -719,8 +719,8 @@ static int btmtk_usb_hci_wmt_sync(struct hci_dev *hdev, case BTMTK_WMT_FUNC_CTRL: if (!skb_pull_data(data->evt_skb, sizeof(wmt_evt_funcc->status))) { - err = -EINVAL; - goto err_free_skb; + status = BTMTK_WMT_ON_UNDONE; + break; } wmt_evt_funcc = (struct btmtk_hci_wmt_evt_funcc *)wmt_evt; -- cgit v1.2.3 From 3374ef8cf99368a40f7efd51a2a375a4c5dc6f0d Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Mon, 11 May 2026 08:26:41 -0400 Subject: Bluetooth: L2CAP: ecred_reconfigure: send packed pdu, not stack pointer Commit 1c08108f3014 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings") converted the on-stack request PDU in l2cap_ecred_reconfigure() from an explicit packed struct to DEFINE_RAW_FLEX(), but did not adjust the size and source-pointer arguments to l2cap_send_cmd(): - struct { - struct l2cap_ecred_reconf_req req; - __le16 scid; - } pdu; + DEFINE_RAW_FLEX(struct l2cap_ecred_reconf_req, pdu, scid, 1); ... l2cap_send_cmd(conn, chan->ident, L2CAP_ECRED_RECONF_REQ, sizeof(pdu), &pdu); After the conversion, DEFINE_RAW_FLEX() expands to declare an anonymous union pdu_u plus a local pointer "pdu" pointing at it. Therefore: - sizeof(pdu) is now sizeof(struct l2cap_ecred_reconf_req *) = 8 on 64-bit (4 on 32-bit), not the 6 bytes of (mtu, mps, scid[1]). - &pdu is the address of the local pointer's stack storage, not the address of the request payload. l2cap_send_cmd() forwards (data, count) to l2cap_build_cmd(), which calls skb_put_data(skb, data, count). The L2CAP_ECRED_RECONFIGURE_REQ packet body therefore contains 8 bytes copied from the kernel stack starting at &pdu -- the 8 bytes overlap the pdu pointer's value, leaking a kernel stack address to the paired Bluetooth peer. The intended (mtu, mps, scid) fields are not transmitted at all, so the peer rejects the request as malformed and the L2CAP_ECRED_RECONFIGURE feature itself has been broken for the local-side initiator since the introducing commit landed. The sibling site l2cap_ecred_conn_req() in the same commit was converted correctly (sizeof(*pdu) + len, pdu); only this site was missed. Restore the original semantics: pass the full flex-struct size via struct_size(pdu, scid, 1) and the pdu pointer (the struct address) as the source. Validated on a stock 7.0-based host kernel via the real call path: setsockopt(SOL_BLUETOOTH, BT_RCVMTU, ...) on a BT_CONNECTED L2CAP_MODE_EXT_FLOWCTL socket emits an L2CAP_ECRED_RECONFIGURE_REQ whose body is 8 bytes (the on-stack pdu local's value) rather than the expected 6. Three captures from fresh socket / fresh hciemu peer on the same host -- low bytes vary per call, high 0xffff confirms a kernel virtual address (KASLR-randomised stack slot, not a fixed string): RECONF_REQ body (ident=0x02 len=8): 42 fb 54 af 0e ca ff ff RECONF_REQ body (ident=0x02 len=8): 52 3d 2e af 0e ca ff ff RECONF_REQ body (ident=0x02 len=8): b2 fc 5b af 0e ca ff ff After this patch the body is 6 bytes carrying the expected little-endian (mtu, mps, scid). Cc: stable@vger.kernel.org Fixes: 1c08108f3014 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end warnings") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/l2cap_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 7701528f1167..fdccd62ccca8 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -7274,7 +7274,7 @@ static void l2cap_ecred_reconfigure(struct l2cap_chan *chan) chan->ident = l2cap_get_ident(conn); l2cap_send_cmd(conn, chan->ident, L2CAP_ECRED_RECONF_REQ, - sizeof(pdu), &pdu); + struct_size(pdu, scid, 1), pdu); } int l2cap_chan_reconfigure(struct l2cap_chan *chan, __u16 mtu) -- cgit v1.2.3 From 375ba7484132662a4a8c7547d088fb6275c00282 Mon Sep 17 00:00:00 2001 From: Shuai Zhang Date: Mon, 11 May 2026 21:58:37 +0800 Subject: Bluetooth: hci_qca: Convert timeout from jiffies to ms Since the timer uses jiffies as its unit rather than ms, the timeout value must be converted from ms to jiffies when configuring the timer. Otherwise, the intended 8s timeout is incorrectly set to approximately 33s. To improve readability, embed msecs_to_jiffies() directly in the macro definitions and drop the _MS suffix from macros that now yield jiffies values: MEMDUMP_TIMEOUT, FW_DOWNLOAD_TIMEOUT, IBS_DISABLE_SSR_TIMEOUT, CMD_TRANS_TIMEOUT, and IBS_BTSOC_TX_IDLE_TIMEOUT. IBS_WAKE_RETRANS_TIMEOUT_MS and IBS_HOST_TX_IDLE_TIMEOUT_MS are intentionally left unchanged. Their values are stored in the struct fields wake_retrans and tx_idle_delay, which hold ms values at runtime and can be modified via debugfs. The msecs_to_jiffies() conversion happens at each call site against the field value, so it cannot be embedded in the macro. Wake timer depends on commit c347ca17d62a Cc: stable@vger.kernel.org Fixes: d841502c79e3 ("Bluetooth: hci_qca: Collect controller memory dump during SSR") Reviewed-by: Paul Menzel Acked-by: Bartosz Golaszewski Signed-off-by: Shuai Zhang Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/hci_qca.c | 33 ++++++++++++++++----------------- 1 file changed, 16 insertions(+), 17 deletions(-) diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c index cd1834246b47..ed280399bf47 100644 --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -48,13 +48,12 @@ #define HCI_MAX_IBS_SIZE 10 #define IBS_WAKE_RETRANS_TIMEOUT_MS 100 -#define IBS_BTSOC_TX_IDLE_TIMEOUT_MS 200 +#define IBS_BTSOC_TX_IDLE_TIMEOUT msecs_to_jiffies(200) #define IBS_HOST_TX_IDLE_TIMEOUT_MS 2000 -#define CMD_TRANS_TIMEOUT_MS 100 -#define MEMDUMP_TIMEOUT_MS 8000 -#define IBS_DISABLE_SSR_TIMEOUT_MS \ - (MEMDUMP_TIMEOUT_MS + FW_DOWNLOAD_TIMEOUT_MS) -#define FW_DOWNLOAD_TIMEOUT_MS 3000 +#define CMD_TRANS_TIMEOUT msecs_to_jiffies(100) +#define MEMDUMP_TIMEOUT msecs_to_jiffies(8000) +#define FW_DOWNLOAD_TIMEOUT msecs_to_jiffies(3000) +#define IBS_DISABLE_SSR_TIMEOUT (MEMDUMP_TIMEOUT + FW_DOWNLOAD_TIMEOUT) /* susclk rate */ #define SUSCLK_RATE_32KHZ 32768 @@ -1096,7 +1095,7 @@ static void qca_controller_memdump(struct work_struct *work) queue_delayed_work(qca->workqueue, &qca->ctrl_memdump_timeout, - msecs_to_jiffies(MEMDUMP_TIMEOUT_MS)); + MEMDUMP_TIMEOUT); skb_pull(skb, sizeof(qca_memdump->ram_dump_size)); qca_memdump->current_seq_no = 0; qca_memdump->received_dump = 0; @@ -1369,7 +1368,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate) if (hu->serdev) serdev_device_wait_until_sent(hu->serdev, - msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS)); + CMD_TRANS_TIMEOUT); /* Give the controller time to process the request */ switch (qca_soc_type(hu)) { @@ -1401,8 +1400,8 @@ static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed) static int qca_send_power_pulse(struct hci_uart *hu, bool on) { + int timeout = CMD_TRANS_TIMEOUT; int ret; - int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS); u8 cmd = on ? QCA_WCN3990_POWERON_PULSE : QCA_WCN3990_POWEROFF_PULSE; /* These power pulses are single byte command which are sent @@ -1607,7 +1606,7 @@ static void qca_wait_for_dump_collection(struct hci_dev *hdev) struct qca_data *qca = hu->priv; wait_on_bit_timeout(&qca->flags, QCA_MEMDUMP_COLLECTION, - TASK_UNINTERRUPTIBLE, MEMDUMP_TIMEOUT_MS); + TASK_UNINTERRUPTIBLE, MEMDUMP_TIMEOUT); clear_bit(QCA_MEMDUMP_COLLECTION, &qca->flags); } @@ -2591,7 +2590,7 @@ static void qca_serdev_remove(struct serdev_device *serdev) static void qca_serdev_shutdown(struct serdev_device *serdev) { int ret; - int timeout = msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS); + int timeout = CMD_TRANS_TIMEOUT; struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev); struct hci_uart *hu = &qcadev->serdev_hu; struct hci_dev *hdev = hu->hdev; @@ -2648,7 +2647,7 @@ static int __maybe_unused qca_suspend(struct device *dev) bool tx_pending = false; int ret = 0; u8 cmd; - u32 wait_timeout = 0; + unsigned long wait_timeout = 0; set_bit(QCA_SUSPENDING, &qca->flags); @@ -2669,15 +2668,15 @@ static int __maybe_unused qca_suspend(struct device *dev) if (test_bit(QCA_IBS_DISABLED, &qca->flags) || test_bit(QCA_SSR_TRIGGERED, &qca->flags)) { wait_timeout = test_bit(QCA_SSR_TRIGGERED, &qca->flags) ? - IBS_DISABLE_SSR_TIMEOUT_MS : - FW_DOWNLOAD_TIMEOUT_MS; + IBS_DISABLE_SSR_TIMEOUT : + FW_DOWNLOAD_TIMEOUT; /* QCA_IBS_DISABLED flag is set to true, During FW download * and during memory dump collection. It is reset to false, * After FW download complete. */ wait_on_bit_timeout(&qca->flags, QCA_IBS_DISABLED, - TASK_UNINTERRUPTIBLE, msecs_to_jiffies(wait_timeout)); + TASK_UNINTERRUPTIBLE, wait_timeout); if (test_bit(QCA_IBS_DISABLED, &qca->flags)) { bt_dev_err(hu->hdev, "SSR or FW download time out"); @@ -2729,7 +2728,7 @@ static int __maybe_unused qca_suspend(struct device *dev) if (tx_pending) { serdev_device_wait_until_sent(hu->serdev, - msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS)); + CMD_TRANS_TIMEOUT); serial_clock_vote(HCI_IBS_TX_VOTE_CLOCK_OFF, hu); } @@ -2738,7 +2737,7 @@ static int __maybe_unused qca_suspend(struct device *dev) */ ret = wait_event_interruptible_timeout(qca->suspend_wait_q, qca->rx_ibs_state == HCI_IBS_RX_ASLEEP, - msecs_to_jiffies(IBS_BTSOC_TX_IDLE_TIMEOUT_MS)); + IBS_BTSOC_TX_IDLE_TIMEOUT); if (ret == 0) { ret = -ETIMEDOUT; goto error; -- cgit v1.2.3 From 7f114497784661b887f1097c440221b18e2914e9 Mon Sep 17 00:00:00 2001 From: Ralf Lici Date: Wed, 13 May 2026 13:10:49 +0200 Subject: selftests: ovpn: reduce remaining ping flood counts Commit 201ba706318d ("selftests: ovpn: reduce ping count in test.sh") lowered the baseline traffic flood ping count to avoid flakes on slower CI instances, however some instances were left out. Apply the same limit to the remaining ovpn selftest flood pings that still request 500 packets. Fixes: 201ba706318d ("selftests: ovpn: reduce ping count in test.sh") Signed-off-by: Ralf Lici Signed-off-by: Antonio Quartulli --- tools/testing/selftests/net/ovpn/test-close-socket.sh | 2 +- tools/testing/selftests/net/ovpn/test-mark.sh | 6 +++--- tools/testing/selftests/net/ovpn/test.sh | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/net/ovpn/test-close-socket.sh b/tools/testing/selftests/net/ovpn/test-close-socket.sh index af1532b4d2da..ec9a51bbf3c9 100755 --- a/tools/testing/selftests/net/ovpn/test-close-socket.sh +++ b/tools/testing/selftests/net/ovpn/test-close-socket.sh @@ -53,7 +53,7 @@ ovpn_run_ping_traffic() { for p in $(seq 1 ${OVPN_NUM_PEERS}); do ovpn_cmd_ok "send ping traffic to peer ${p}" \ - ip netns exec ovpn_peer0 ping -qfc 500 -w 3 \ + ip netns exec ovpn_peer0 ping -qfc 100 -w 3 \ 5.5.5.$((p + 1)) done } diff --git a/tools/testing/selftests/net/ovpn/test-mark.sh b/tools/testing/selftests/net/ovpn/test-mark.sh index 5a8f47554286..7c1d56e9c525 100755 --- a/tools/testing/selftests/net/ovpn/test-mark.sh +++ b/tools/testing/selftests/net/ovpn/test-mark.sh @@ -66,7 +66,7 @@ ovpn_mark_run_baseline_traffic() { for p in $(seq 1 3); do ovpn_cmd_ok "send baseline traffic to peer ${p}" \ - ip netns exec ovpn_peer0 ping -qfc 500 -w 3 \ + ip netns exec ovpn_peer0 ping -qfc 100 -w 3 \ 5.5.5.$((p + 1)) done } @@ -101,7 +101,7 @@ ovpn_mark_verify_drop_traffic() { local total_count for p in $(seq 1 3); do - if ping_output=$(ip netns exec ovpn_peer0 ping -qfc 500 -w 1 \ + if ping_output=$(ip netns exec ovpn_peer0 ping -qfc 100 -w 1 \ 5.5.5.$((p + 1)) 2>&1); then printf '%s\n' "expected ping to peer ${p} to fail \ after nft drop rule" @@ -144,7 +144,7 @@ ovpn_mark_verify_traffic_recovery() { sleep 1 for p in $(seq 1 3); do ovpn_cmd_ok "send recovery traffic to peer ${p}" \ - ip netns exec ovpn_peer0 ping -qfc 500 -w 3 \ + ip netns exec ovpn_peer0 ping -qfc 100 -w 3 \ 5.5.5.$((p + 1)) done } diff --git a/tools/testing/selftests/net/ovpn/test.sh b/tools/testing/selftests/net/ovpn/test.sh index c06e3135fbef..9b5610837032 100755 --- a/tools/testing/selftests/net/ovpn/test.sh +++ b/tools/testing/selftests/net/ovpn/test.sh @@ -110,7 +110,7 @@ ovpn_run_basic_traffic() { ovpn_run_lan_traffic() { ovpn_cmd_ok "ping LAN behind peer1" \ - ip netns exec ovpn_peer0 ping -qfc 500 -w 3 "${OVPN_LAN_IP}" + ip netns exec ovpn_peer0 ping -qfc 100 -w 3 "${OVPN_LAN_IP}" } ovpn_run_float_mode() { @@ -127,7 +127,7 @@ ovpn_run_float_mode() { for p in $(seq 1 ${OVPN_NUM_PEERS}); do peer_ns="ovpn_peer${p}" ovpn_cmd_ok "ping tunnel after float peer ${p}" \ - ip netns exec "${peer_ns}" ping -qfc 500 -w 3 5.5.5.1 + ip netns exec "${peer_ns}" ping -qfc 100 -w 3 5.5.5.1 done } -- cgit v1.2.3 From 775d8d7ad02aa345e1588424a6a8b9ae49fb9012 Mon Sep 17 00:00:00 2001 From: David Carlier Date: Wed, 13 May 2026 11:55:20 +0100 Subject: ovpn: tcp - use cached peer pointer in ovpn_tcp_close() ovpn_tcp_close() loads the ovpn_socket via rcu_dereference_sk_user_data() under rcu_read_lock(), takes a reference on sock->peer, caches the peer pointer in a local, and drops the read lock. It then passes sock->peer (rather than the cached local) to ovpn_peer_del(), re-dereferencing the ovpn_socket after the RCU read section has ended. Unlike ovpn_tcp_sendmsg(), which uses the same "load under RCU, use after unlock" pattern but is protected by lock_sock() held across the function, ovpn_tcp_close() runs without the socket lock: inet_release() invokes sk_prot->close() without taking lock_sock first. ovpn_socket_release() can therefore complete its kref_put -> detach -> synchronize_rcu -> kfree(sock) sequence concurrently, in the window after ovpn_tcp_close() drops rcu_read_lock() but before it dereferences sock->peer. The synchronize_rcu() in ovpn_socket_release() protects readers that use the dereferenced pointer inside the RCU read section, not those that escape the pointer to a local and use it afterwards. A reproducer follows the pattern of commit 94560267d6c4 ("ovpn: tcp - don't deref NULL sk_socket member after tcp_close()"): trigger a peer removal (keepalive expiration or netlink OVPN_CMD_DEL_PEER) at the same moment userspace closes the TCP fd. That commit fixed the detach-side of the same race window; this one fixes the close-side at a different victim. Tighten the entry block to read sock->peer exactly once into the cached peer local, and route all subsequent uses (the hold check, the ovpn_peer_del() call, and the prot->close() invocation) through that local. sock->peer is only ever written once in ovpn_socket_new() under lock_sock(), before rcu_assign_sk_user_data() publishes the ovpn_socket, and is never reassigned afterwards - but the previous multi-read pattern made that invariant implicit rather than explicit. The same multi-read shape exists in ovpn_tcp_recvmsg(), ovpn_tcp_sendmsg(), ovpn_tcp_data_ready() and ovpn_tcp_write_space(); those will be cleaned up via a dedicated helper in a follow-up net-next series. Fixes: 11851cbd60ea ("ovpn: implement TCP transport") Reviewed-by: Sabrina Dubroca Assisted-by: Claude:claude-opus-4-7 Signed-off-by: David Carlier Signed-off-by: Antonio Quartulli --- drivers/net/ovpn/tcp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/ovpn/tcp.c b/drivers/net/ovpn/tcp.c index 65054cc84be5..82809b016f0a 100644 --- a/drivers/net/ovpn/tcp.c +++ b/drivers/net/ovpn/tcp.c @@ -581,14 +581,19 @@ static void ovpn_tcp_close(struct sock *sk, long timeout) rcu_read_lock(); sock = rcu_dereference_sk_user_data(sk); - if (!sock || !sock->peer || !ovpn_peer_hold(sock->peer)) { + if (!sock) { rcu_read_unlock(); return; } + peer = sock->peer; + if (!peer || !ovpn_peer_hold(peer)) { + rcu_read_unlock(); + return; + } rcu_read_unlock(); - ovpn_peer_del(sock->peer, OVPN_DEL_PEER_REASON_TRANSPORT_DISCONNECT); + ovpn_peer_del(peer, OVPN_DEL_PEER_REASON_TRANSPORT_DISCONNECT); peer->tcp.sk_cb.prot->close(sk, timeout); ovpn_peer_put(peer); } -- cgit v1.2.3 From 1fef6614673ff0846d30acdeeaf3cf98bb5f6116 Mon Sep 17 00:00:00 2001 From: David Carlier Date: Wed, 13 May 2026 11:55:21 +0100 Subject: ovpn: respect peer refcount in CMD_NEW_PEER error path ovpn_nl_peer_new_doit()'s error path calls ovpn_peer_release() directly rather than ovpn_peer_put(), bypassing the kref. The accompanying comment ("peer was not yet hashed, thus it is not used in any context") holds for UDP but not for TCP. For UDP, the ovpn_socket union uses the .ovpn arm and never points back at a peer; UDP encap_recv looks up peers via the not-yet-populated hashtables, so the new peer is unreachable until ovpn_peer_add() publishes it. For TCP, ovpn_socket_new() sets ovpn_sock->peer and ovpn_tcp_socket_attach() publishes ovpn_sock via rcu_assign_sk_user_data(). From that moment until ovpn_socket_release() detaches in the error path, the TCP fd is fully wired: userspace recvmsg / sendmsg / close / poll on the fd, as well as the strparser-driven ovpn_tcp_rcv() path, can reach the peer through sk_user_data -> ovpn_sock->peer and bump its refcount via ovpn_peer_hold(). ovpn_tcp_socket_wait_finish() (called inside ovpn_socket_release()) drains strparser and the tx work, but does not synchronize with userspace syscall callers that already hold a peer reference. If ovpn_nl_peer_modify() or ovpn_peer_add() returns an error while such a caller is in flight - notably an ovpn_tcp_recvmsg() blocked in __skb_recv_datagram() on peer->tcp.user_queue - the direct ovpn_peer_release() destroys the peer while the caller still holds the reference, and the eventual ovpn_peer_put() from that caller operates on freed memory. Replace the direct destructor call with ovpn_peer_put() so the kref correctly defers destruction until the last reference is dropped. In the common case where no concurrent user is present, behaviour is unchanged: the kref hits zero immediately and ovpn_peer_release_kref() runs the same destructor. With this conversion ovpn_peer_release() has no callers outside peer.c - ovpn_peer_release_kref() in the same translation unit is the only remaining user - so make it static and drop its declaration from peer.h. Fixes: 11851cbd60ea ("ovpn: implement TCP transport") Reviewed-by: Sabrina Dubroca Assisted-by: Claude:claude-opus-4-7 Signed-off-by: David Carlier Signed-off-by: Antonio Quartulli --- drivers/net/ovpn/netlink.c | 8 +++++--- drivers/net/ovpn/peer.c | 2 +- drivers/net/ovpn/peer.h | 1 - 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ovpn/netlink.c b/drivers/net/ovpn/netlink.c index 291e2e5bb450..4c66c1ec497e 100644 --- a/drivers/net/ovpn/netlink.c +++ b/drivers/net/ovpn/netlink.c @@ -462,10 +462,12 @@ int ovpn_nl_peer_new_doit(struct sk_buff *skb, struct genl_info *info) sock_release: ovpn_socket_release(peer); peer_release: - /* release right away because peer was not yet hashed, thus it is not - * used in any context + /* For UDP, the peer is unreachable until added to the hashtables, so + * dropping the initial reference is enough. For TCP, the peer may be + * concurrently reachable via sk_user_data->peer until + * ovpn_socket_release() detaches; rely on the refcount. */ - ovpn_peer_release(peer); + ovpn_peer_put(peer); return ret; } diff --git a/drivers/net/ovpn/peer.c b/drivers/net/ovpn/peer.c index c02dfab51a6e..fb10d1fea940 100644 --- a/drivers/net/ovpn/peer.c +++ b/drivers/net/ovpn/peer.c @@ -354,7 +354,7 @@ static void ovpn_peer_release_rcu(struct rcu_head *head) * ovpn_peer_release - release peer private members * @peer: the peer to release */ -void ovpn_peer_release(struct ovpn_peer *peer) +static void ovpn_peer_release(struct ovpn_peer *peer) { ovpn_crypto_state_release(&peer->crypto); spin_lock_bh(&peer->lock); diff --git a/drivers/net/ovpn/peer.h b/drivers/net/ovpn/peer.h index 328401570cba..86c8cffada6d 100644 --- a/drivers/net/ovpn/peer.h +++ b/drivers/net/ovpn/peer.h @@ -127,7 +127,6 @@ static inline bool ovpn_peer_hold(struct ovpn_peer *peer) return kref_get_unless_zero(&peer->refcount); } -void ovpn_peer_release(struct ovpn_peer *peer); void ovpn_peer_release_kref(struct kref *kref); /** -- cgit v1.2.3 From 982422b11e6f95f766a8cd2c2b1cbdb77e234a61 Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Tue, 17 Mar 2026 14:47:56 +0100 Subject: ovpn: fix race between deleting interface and adding new peer While deleting an existing ovpn interface, there is a very narrow window where adding a new peer via netlink may cause the netdevice to hang and prevent its unregistration. It may happen during ovpn_dellink(), when all existing peers are freed and the device is queued for deregistration, but a CMD_PEER_NEW message comes in adding a new peer that takes again a reference to the netdev. At this point there is no way to release the device because we are under the assumption that all peers were already released. Fix the race condition by releasing all peers in ndo_uninit(), when the netdevice has already been removed from the netdev list. Also ovpn_peer_add() has now an extra check that forces the function to bail out if the device reg_state is not REGISTERED. This way any incoming CMD_PEER_NEW racing with the interface deletion routine will simply stop before adding the peer. Note that the above check happens while holding the netdev_lock to prevent racing netdev state changes. ovpn_dellink() is now empty and can be removed. Reported-by: Hyunwoo Kim Closes: https://lore.kernel.org/netdev/aaVgJ16edTfQkYbx@v4bel/ Suggested-by: Sabrina Dubroca Fixes: 80747caef33d ("ovpn: introduce the ovpn_peer object") Reviewed-by: Sabrina Dubroca Signed-off-by: Antonio Quartulli --- drivers/net/ovpn/main.c | 12 ++---------- drivers/net/ovpn/peer.c | 21 ++++++++++++++++++--- 2 files changed, 20 insertions(+), 13 deletions(-) diff --git a/drivers/net/ovpn/main.c b/drivers/net/ovpn/main.c index 2e0420febda0..9993c1dfe471 100644 --- a/drivers/net/ovpn/main.c +++ b/drivers/net/ovpn/main.c @@ -92,6 +92,8 @@ static void ovpn_net_uninit(struct net_device *dev) { struct ovpn_priv *ovpn = netdev_priv(dev); + disable_delayed_work_sync(&ovpn->keepalive_work); + ovpn_peers_free(ovpn, NULL, OVPN_DEL_PEER_REASON_TEARDOWN); gro_cells_destroy(&ovpn->gro_cells); } @@ -208,15 +210,6 @@ static int ovpn_newlink(struct net_device *dev, return register_netdevice(dev); } -static void ovpn_dellink(struct net_device *dev, struct list_head *head) -{ - struct ovpn_priv *ovpn = netdev_priv(dev); - - cancel_delayed_work_sync(&ovpn->keepalive_work); - ovpn_peers_free(ovpn, NULL, OVPN_DEL_PEER_REASON_TEARDOWN); - unregister_netdevice_queue(dev, head); -} - static int ovpn_fill_info(struct sk_buff *skb, const struct net_device *dev) { struct ovpn_priv *ovpn = netdev_priv(dev); @@ -235,7 +228,6 @@ static struct rtnl_link_ops ovpn_link_ops = { .policy = ovpn_policy, .maxtype = IFLA_OVPN_MAX, .newlink = ovpn_newlink, - .dellink = ovpn_dellink, .fill_info = ovpn_fill_info, }; diff --git a/drivers/net/ovpn/peer.c b/drivers/net/ovpn/peer.c index fb10d1fea940..a09d61296425 100644 --- a/drivers/net/ovpn/peer.c +++ b/drivers/net/ovpn/peer.c @@ -1034,14 +1034,29 @@ static int ovpn_peer_add_p2p(struct ovpn_priv *ovpn, struct ovpn_peer *peer) */ int ovpn_peer_add(struct ovpn_priv *ovpn, struct ovpn_peer *peer) { + int ret = -ENODEV; + + /* Prevent adding new peers while destroying the ovpn interface. + * Failing to do so would end up holding the device reference + * endlessly hostage of the new peer object with no chance of + * release.. + */ + netdev_lock(ovpn->dev); + if (ovpn->dev->reg_state != NETREG_REGISTERED) + goto out; + switch (ovpn->mode) { case OVPN_MODE_MP: - return ovpn_peer_add_mp(ovpn, peer); + ret = ovpn_peer_add_mp(ovpn, peer); + break; case OVPN_MODE_P2P: - return ovpn_peer_add_p2p(ovpn, peer); + ret = ovpn_peer_add_p2p(ovpn, peer); + break; } +out: + netdev_unlock(ovpn->dev); - return -EOPNOTSUPP; + return ret; } /** -- cgit v1.2.3 From 593980175389a05793f6060aa20e626330960395 Mon Sep 17 00:00:00 2001 From: Guannan Wang Date: Thu, 14 May 2026 15:44:54 +0800 Subject: bpf: Use array_map_meta_equal for percpu array inner map replacement percpu_array_map_ops.map_meta_equal points to the generic bpf_map_meta_equal(), which does not compare max_entries. When a percpu array serves as an inner map, replacing it with one that has fewer max_entries bypasses the check. Since percpu_array_map_gen_lookup() inlines the original template's index_mask as a JIT immediate, a lookup on the replacement map can access pptrs[] out of bounds. Point percpu_array_map_ops.map_meta_equal to array_map_meta_equal(), which already enforces the max_entries equality check. Add a selftest to verify that replacing a percpu array inner map with a differently-sized one is rejected. Fixes: db69718b8efa ("bpf: inline bpf_map_lookup_elem() for PERCPU_ARRAY maps") Signed-off-by: Guannan Wang Acked-by: Mykyta Yatsenko Link: https://lore.kernel.org/r/20260514074454.77491-1-wgnbuaa@gmail.com Signed-off-by: Alexei Starovoitov --- kernel/bpf/arraymap.c | 2 +- .../bpf/prog_tests/percpu_array_inner_map.c | 57 ++++++++++++++++++++++ 2 files changed, 58 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/bpf/prog_tests/percpu_array_inner_map.c diff --git a/kernel/bpf/arraymap.c b/kernel/bpf/arraymap.c index 5e25e0353509..dfb2110ab733 100644 --- a/kernel/bpf/arraymap.c +++ b/kernel/bpf/arraymap.c @@ -827,7 +827,7 @@ const struct bpf_map_ops array_map_ops = { }; const struct bpf_map_ops percpu_array_map_ops = { - .map_meta_equal = bpf_map_meta_equal, + .map_meta_equal = array_map_meta_equal, .map_alloc_check = array_map_alloc_check, .map_alloc = array_map_alloc, .map_free = array_map_free, diff --git a/tools/testing/selftests/bpf/prog_tests/percpu_array_inner_map.c b/tools/testing/selftests/bpf/prog_tests/percpu_array_inner_map.c new file mode 100644 index 000000000000..2a8b2381306b --- /dev/null +++ b/tools/testing/selftests/bpf/prog_tests/percpu_array_inner_map.c @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: GPL-2.0 +#include + +/* + * Test that replacing an inner percpu array map with one that has different + * max_entries is rejected. percpu_array_map_gen_lookup() inlines the + * template's index_mask, so allowing a smaller replacement would cause OOB. + */ +void test_percpu_array_inner_map(void) +{ + LIBBPF_OPTS(bpf_map_create_opts, opts); + int outer_fd, tmpl_fd, good_fd, bad_fd, err; + int zero = 0; + + /* Create template: percpu array with 8 entries */ + tmpl_fd = bpf_map_create(BPF_MAP_TYPE_PERCPU_ARRAY, "tmpl", + sizeof(int), sizeof(long), 8, NULL); + if (!ASSERT_OK_FD(tmpl_fd, "create_tmpl")) + return; + + /* Create outer array-of-maps using template */ + opts.inner_map_fd = tmpl_fd; + outer_fd = bpf_map_create(BPF_MAP_TYPE_ARRAY_OF_MAPS, "outer", + sizeof(int), sizeof(int), 1, &opts); + if (!ASSERT_OK_FD(outer_fd, "create_outer")) + goto close_tmpl; + + /* Insert template as initial inner map */ + err = bpf_map_update_elem(outer_fd, &zero, &tmpl_fd, 0); + if (!ASSERT_OK(err, "insert_tmpl")) + goto close_outer; + + /* Replacement with same max_entries should succeed */ + good_fd = bpf_map_create(BPF_MAP_TYPE_PERCPU_ARRAY, "good", + sizeof(int), sizeof(long), 8, NULL); + if (!ASSERT_OK_FD(good_fd, "create_good")) + goto close_outer; + + err = bpf_map_update_elem(outer_fd, &zero, &good_fd, 0); + ASSERT_OK(err, "replace_same_max_entries"); + close(good_fd); + + /* Replacement with fewer max_entries must fail */ + bad_fd = bpf_map_create(BPF_MAP_TYPE_PERCPU_ARRAY, "bad", + sizeof(int), sizeof(long), 2, NULL); + if (!ASSERT_OK_FD(bad_fd, "create_bad")) + goto close_outer; + + err = bpf_map_update_elem(outer_fd, &zero, &bad_fd, 0); + ASSERT_ERR(err, "replace_smaller_max_entries"); + close(bad_fd); + +close_outer: + close(outer_fd); +close_tmpl: + close(tmpl_fd); +} -- cgit v1.2.3 From 1854082fe0ddb81bc93d1f8e8a00554217fd09d1 Mon Sep 17 00:00:00 2001 From: David Carlier Date: Fri, 8 May 2026 21:19:58 +0100 Subject: phy: apple: atc: Fix typec switch/mux leak on unbind atcphy_probe_switch() and atcphy_probe_mux() discard the pointers returned by typec_switch_register() and typec_mux_register(). The platform driver has no .remove callback, so when the driver unbinds (e.g. via sysfs unbind) neither typec_switch_unregister() nor typec_mux_unregister() is called. The framework reference taken in typec_switch_register() (device_initialize() + device_add() in drivers/usb/typec/mux.c) is therefore never dropped and the typec_switch_dev / typec_mux_dev objects stay live forever, with their sysfs entries under the typec_mux class also left behind. A subsequent rebind cannot recreate them with the same fwnode-derived name. Save the registered handles and unregister them through devm_add_action_or_reset() so framework registration is torn down in step with the driver's other devm-managed state. While here, drop struct apple_atcphy::sw and ::mux: they were declared with the consumer-side types (typec_switch *, typec_mux *) instead of the provider-side types and were never assigned. Scope of the fix ================ This patch fixes the registration leak only. It does not close the use-after-free window that arises when a consumer that obtained a reference via fwnode_typec_switch_get() / fwnode_typec_mux_get() outlives the provider unbind: such consumers keep the underlying typec_switch_dev / typec_mux_dev alive past device_unregister(), and a later typec_switch_set() / typec_mux_set() still invokes the registered atcphy_sw_set() / atcphy_mux_set(), which dereferences the freed apple_atcphy through typec_{switch,mux}_get_drvdata(). On Apple Silicon the relevant consumers are the typec port and the cd321x controller registered by drivers/usb/typec/tipd/core.c. Cable plug / orientation events and alt-mode transitions trigger the .set callbacks via: tps6598x_interrupt() drivers/usb/typec/tipd/core.c tps6598x_handle_plug_event() tps6598x_connect()/_disconnect() typec_set_orientation() drivers/usb/typec/class.c typec_switch_set(port->sw) drivers/usb/typec/mux.c atcphy_sw_set() drivers/phy/apple/atc.c cd321x_update_work() drivers/usb/typec/tipd/core.c cd321x_typec_update_mode() typec_mux_set(cd321x->mux) drivers/usb/typec/mux.c atcphy_mux_set() drivers/phy/apple/atc.c Closing that window requires framework support for invalidating consumer-held references on provider unbind. The same consumer-survives-provider pattern has been discussed for the PHY framework [1] and is out of scope here. [1] https://lore.kernel.org/linux-phy/aZejMSJ9qqRWb2pX@google.com/ Fixes: 8e98ca1e74db ("phy: apple: Add Apple Type-C PHY") Signed-off-by: David Carlier Reviewed-by: Vladimir Oltean Tested-by: Joshua Peisach Link: https://lkml.kernel.org/r/6ec1ed08328340db42655287afd5fa4067316b11.camel@perches.com Link: https://patch.msgid.link/20260508201958.30060-1-devnexen@gmail.com Signed-off-by: Vinod Koul --- drivers/phy/apple/atc.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/drivers/phy/apple/atc.c b/drivers/phy/apple/atc.c index e9d106f135c5..4156fabad742 100644 --- a/drivers/phy/apple/atc.c +++ b/drivers/phy/apple/atc.c @@ -628,9 +628,6 @@ struct apple_atcphy { struct reset_controller_dev rcdev; - struct typec_switch *sw; - struct typec_mux *mux; - struct mutex lock; }; @@ -2066,15 +2063,25 @@ static int atcphy_sw_set(struct typec_switch_dev *sw, enum typec_orientation ori return 0; } +static void atcphy_typec_switch_unregister(void *data) +{ + typec_switch_unregister(data); +} + static int atcphy_probe_switch(struct apple_atcphy *atcphy) { + struct typec_switch_dev *sw; struct typec_switch_desc sw_desc = { .drvdata = atcphy, .fwnode = atcphy->dev->fwnode, .set = atcphy_sw_set, }; - return PTR_ERR_OR_ZERO(typec_switch_register(atcphy->dev, &sw_desc)); + sw = typec_switch_register(atcphy->dev, &sw_desc); + if (IS_ERR(sw)) + return PTR_ERR(sw); + + return devm_add_action_or_reset(atcphy->dev, atcphy_typec_switch_unregister, sw); } static int atcphy_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state) @@ -2146,15 +2153,25 @@ static int atcphy_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *sta return atcphy_configure(atcphy, target_mode); } +static void atcphy_typec_mux_unregister(void *data) +{ + typec_mux_unregister(data); +} + static int atcphy_probe_mux(struct apple_atcphy *atcphy) { + struct typec_mux_dev *mux; struct typec_mux_desc mux_desc = { .drvdata = atcphy, .fwnode = atcphy->dev->fwnode, .set = atcphy_mux_set, }; - return PTR_ERR_OR_ZERO(typec_mux_register(atcphy->dev, &mux_desc)); + mux = typec_mux_register(atcphy->dev, &mux_desc); + if (IS_ERR(mux)) + return PTR_ERR(mux); + + return devm_add_action_or_reset(atcphy->dev, atcphy_typec_mux_unregister, mux); } static int atcphy_load_tunables(struct apple_atcphy *atcphy) -- cgit v1.2.3 From 9cd3f16c320bfdadd4509358122368deb56a5741 Mon Sep 17 00:00:00 2001 From: Ruide Cao Date: Wed, 13 May 2026 11:58:15 +0800 Subject: batman-adv: fix fragment reassembly length accounting batman-adv keeps a running payload length for queued fragments and uses it to validate a fragment chain before reassembly. That accounting currently allows the accumulated fragment length to be truncated during updates. As a result, malformed fragment chains can bypass the intended validation and drive reassembly with inconsistent length state, leading to a local denial of service. Fix the accounting by storing the accumulated length in a length-typed field and rejecting update overflows before the existing validation logic runs. The fix was verified against the original reproducer and against valid fragment reassembly paths. Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Ruide Cao Tested-by: Ren Wei Signed-off-by: Ren Wei Signed-off-by: Sven Eckelmann --- net/batman-adv/fragmentation.c | 23 +++++++++++++++++------ net/batman-adv/types.h | 2 +- 2 files changed, 18 insertions(+), 7 deletions(-) diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c index f4e45cc25816..1152c2ce0c1e 100644 --- a/net/batman-adv/fragmentation.c +++ b/net/batman-adv/fragmentation.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -80,9 +81,9 @@ void batadv_frag_purge_orig(struct batadv_orig_node *orig_node, * * Return: the maximum size of payload that can be fragmented. */ -static int batadv_frag_size_limit(void) +static size_t batadv_frag_size_limit(void) { - int limit = BATADV_FRAG_MAX_FRAG_SIZE; + size_t limit = BATADV_FRAG_MAX_FRAG_SIZE; limit -= sizeof(struct batadv_frag_packet); limit *= BATADV_FRAG_MAX_FRAGMENTS; @@ -143,7 +144,9 @@ static bool batadv_frag_insert_packet(struct batadv_orig_node *orig_node, struct batadv_frag_packet *frag_packet; u8 bucket; u16 seqno, hdr_size = sizeof(struct batadv_frag_packet); + bool overflow = false; bool ret = false; + size_t data_len; /* Linearize packet to avoid linearizing 16 packets in a row when doing * the later merge. Non-linear merge should be added to remove this @@ -153,6 +156,7 @@ static bool batadv_frag_insert_packet(struct batadv_orig_node *orig_node, goto err; frag_packet = (struct batadv_frag_packet *)skb->data; + data_len = skb->len - hdr_size; seqno = ntohs(frag_packet->seqno); bucket = seqno % BATADV_FRAG_BUFFER_COUNT; @@ -171,7 +175,7 @@ static bool batadv_frag_insert_packet(struct batadv_orig_node *orig_node, spin_lock_bh(&chain->lock); if (batadv_frag_init_chain(chain, seqno)) { hlist_add_head(&frag_entry_new->list, &chain->fragment_list); - chain->size = skb->len - hdr_size; + chain->size = data_len; chain->timestamp = jiffies; chain->total_size = ntohs(frag_packet->total_size); ret = true; @@ -188,7 +192,11 @@ static bool batadv_frag_insert_packet(struct batadv_orig_node *orig_node, if (frag_entry_curr->no < frag_entry_new->no) { hlist_add_before(&frag_entry_new->list, &frag_entry_curr->list); - chain->size += skb->len - hdr_size; + + if (check_add_overflow(chain->size, data_len, + &chain->size)) + overflow = true; + chain->timestamp = jiffies; ret = true; goto out; @@ -201,13 +209,16 @@ static bool batadv_frag_insert_packet(struct batadv_orig_node *orig_node, /* Reached the end of the list, so insert after 'frag_entry_last'. */ if (likely(frag_entry_last)) { hlist_add_behind(&frag_entry_new->list, &frag_entry_last->list); - chain->size += skb->len - hdr_size; + + if (check_add_overflow(chain->size, data_len, &chain->size)) + overflow = true; + chain->timestamp = jiffies; ret = true; } out: - if (chain->size > batadv_frag_size_limit() || + if (overflow || chain->size > batadv_frag_size_limit() || chain->total_size != ntohs(frag_packet->total_size) || chain->total_size > batadv_frag_size_limit()) { /* Clear chain if total size of either the list or the packet diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 739439e2b235..c8c3e8064f00 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -301,7 +301,7 @@ struct batadv_frag_table_entry { u16 seqno; /** @size: accumulated size of packets in list */ - u16 size; + size_t size; /** @total_size: expected size of the assembled packet */ u16 total_size; -- cgit v1.2.3 From a340a51ed801eab7bb454150c226323b865263cc Mon Sep 17 00:00:00 2001 From: Ruijie Li Date: Thu, 14 May 2026 16:13:25 +0800 Subject: batman-adv: clear current gateway during teardown batadv_gw_node_free() removes the gateway list entries during mesh teardown, but it does not clear the currently selected gateway. This leaves stale gateway state behind across cleanup and can break a later mesh recreation. Clear bat_priv->gw.curr_gw before walking the gateway list so the selected gateway reference is dropped as part of teardown. Fixes: 2265c1410864 ("batman-adv: gateway election code refactoring") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Ruijie Li Signed-off-by: Zhanpeng Li Signed-off-by: Ren Wei Signed-off-by: Sven Eckelmann --- net/batman-adv/gateway_client.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/batman-adv/gateway_client.c b/net/batman-adv/gateway_client.c index 51e9c081a2a4..a9d0346e8332 100644 --- a/net/batman-adv/gateway_client.c +++ b/net/batman-adv/gateway_client.c @@ -478,10 +478,14 @@ void batadv_gw_node_delete(struct batadv_priv *bat_priv, */ void batadv_gw_node_free(struct batadv_priv *bat_priv) { + struct batadv_gw_node *curr_gw; struct batadv_gw_node *gw_node; struct hlist_node *node_tmp; spin_lock_bh(&bat_priv->gw.list_lock); + curr_gw = rcu_replace_pointer(bat_priv->gw.curr_gw, NULL, true); + batadv_gw_node_put(curr_gw); + hlist_for_each_entry_safe(gw_node, node_tmp, &bat_priv->gw.gateway_list, list) { hlist_del_init_rcu(&gw_node->list); -- cgit v1.2.3 From 2d8826a2d3657cea66fb0370f9e521575a673871 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Wed, 13 May 2026 09:01:34 +0200 Subject: batman-adv: dat: handle forward allocation error batadv_dat_forward_data() calls pskb_copy_for_clone() to duplicate an skb for each DHT candidate, but does not check the return value before passing it to batadv_send_skb_prepare_unicast_4addr(). That function dereferences the skb unconditionally, so a failed allocation triggers a NULL pointer dereference. Skip forwarding to the current DHT candidate on allocation failure. Cc: stable@kernel.org Fixes: 785ea1144182 ("batman-adv: Distributed ARP Table - create DHT helper functions") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann --- net/batman-adv/distributed-arp-table.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/batman-adv/distributed-arp-table.c b/net/batman-adv/distributed-arp-table.c index 3efc4cf50b46..0a8bd95e2f99 100644 --- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -696,6 +696,9 @@ static bool batadv_dat_forward_data(struct batadv_priv *bat_priv, goto free_orig; tmp_skb = pskb_copy_for_clone(skb, GFP_ATOMIC); + if (!tmp_skb) + goto free_neigh; + if (!batadv_send_skb_prepare_unicast_4addr(bat_priv, tmp_skb, cand[i].orig_node, packet_subtype)) { -- cgit v1.2.3 From 6c65cf23d4c6170fcf5714c32aa64689718cb142 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Wed, 13 May 2026 09:01:35 +0200 Subject: batman-adv: tp_meter: avoid use of uninit sender vars batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it proceeds to read sender-only members that were never initialized, leading to undefined behavior. This can be triggered when a node that is currently acting as a receiver in an ongoing tp_meter session receives a malicious ACK packet. Guard against this by checking tp_vars->role immediately after the lookup and bailing out if it is not BATADV_TP_SENDER, before any of those members are accessed. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann --- net/batman-adv/tp_meter.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/tp_meter.c b/net/batman-adv/tp_meter.c index ca6c3f6374bc..a3593d104caa 100644 --- a/net/batman-adv/tp_meter.c +++ b/net/batman-adv/tp_meter.c @@ -664,6 +664,9 @@ static void batadv_tp_recv_ack(struct batadv_priv *bat_priv, if (unlikely(!tp_vars)) return; + if (unlikely(tp_vars->role != BATADV_TP_SENDER)) + goto out; + if (unlikely(atomic_read(&tp_vars->sending) == 0)) goto out; @@ -1101,12 +1104,16 @@ void batadv_tp_stop(struct batadv_priv *bat_priv, const u8 *dst, if (!tp_vars) { batadv_dbg(BATADV_DBG_TP_METER, bat_priv, "Meter: trying to interrupt an already over connection\n"); - goto out; + goto out_put_orig_node; } + if (unlikely(tp_vars->role != BATADV_TP_SENDER)) + goto out_put_tp_vars; + batadv_tp_sender_shutdown(tp_vars, return_value); +out_put_tp_vars: batadv_tp_vars_put(tp_vars); -out: +out_put_orig_node: batadv_orig_node_put(orig_node); } -- cgit v1.2.3 From 0ce1bc9e46ecabe84772bb561e373c0d9876d6f2 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Wed, 13 May 2026 13:53:24 -0400 Subject: RDMA/siw: Reject MPA FPDU length underflow before signed receive math A malicious connected siw peer can send an iWARP FPDU whose MPA length field (c_hdr->mpa_len, 16 bit big-endian, peer-controlled) is smaller than the fixed DDP/RDMAP header for the announced opcode. Soft-iWARP parses the full header in siw_get_hdr() based on iwarp_pktinfo[opcode] .hdr_len, but never compares mpa_len against that header length. siw_tcp_rx_data() then derives srx->fpdu_part_rem = be16_to_cpu(mpa_len) - fpdu_part_rcvd + MPA_HDR_SIZE; where fpdu_part_rcvd equals iwarp_pktinfo[opcode].hdr_len at this point. For a tagged WRITE (hdr_len 16, MPA_HDR_SIZE 2) the smallest on-wire mpa_len of 0 yields fpdu_part_rem = -14, and any mpa_len below hdr_len - MPA_HDR_SIZE underflows to a negative int. The signed value then flows into siw_proc_write()/siw_proc_rresp() as bytes = min(srx->fpdu_part_rem, srx->skb_new); is handed to siw_check_mem() as an int len (whose interval check addr + len > mem->va + mem->len is satisfied for a valid base when len is negative), and reaches siw_rx_data() -> siw_rx_kva() / siw_rx_umem() -> skb_copy_bits() as a signed copy length. The header copy branch in skb_copy_bits() promotes that to size_t, producing a multi-gigabyte read. KASAN under a KUnit harness that drives the real kernel TCP receive path -- a loopback AF_INET socketpair, the malformed FPDU written via kernel_sendmsg, sk_data_ready firing in softirq, tcp_read_sock dispatching to siw_tcp_rx_data -- reports: BUG: KASAN: use-after-free in skb_copy_bits+0x284/0x480 Read of size 4294967295 at addr ffff888... Call Trace: skb_copy_bits siw_rx_kva siw_rx_data siw_check_mem siw_proc_write siw_tcp_rx_data __tcp_read_sock siw_qp_llp_data_ready tcp_data_ready tcp_data_queue Add the missing invariant at the earliest point where the peer header is fully assembled. iwarp_pktinfo[*].hdr_len - MPA_HDR_SIZE is exactly the value the siw transmitter uses as the minimum mpa_len for each opcode (drivers/infiniband/sw/siw/siw_qp.c:33), so this matches the protocol contract. Out-of-range FPDUs terminate the connection with TERM_ERROR_LAYER_LLP / LLP_ETYPE_MPA / LLP_ECODE_FPDU_START -- which is RFC 5044 Section 8 error code 3 ("Marker and ULPDU Length fields do not agree on the start of an FPDU"), the correct framing-error class for this inconsistency. Fixes: 8b6a361b8c48 ("rdma/siw: receive path") Link: https://patch.msgid.link/r/20260513175325.2042630-2-michael.bommarito@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Acked-by: Bernard Metzler Signed-off-by: Jason Gunthorpe --- drivers/infiniband/sw/siw/siw_qp_rx.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/infiniband/sw/siw/siw_qp_rx.c b/drivers/infiniband/sw/siw/siw_qp_rx.c index e8a88b378d51..34d03584160c 100644 --- a/drivers/infiniband/sw/siw/siw_qp_rx.c +++ b/drivers/infiniband/sw/siw/siw_qp_rx.c @@ -1081,6 +1081,21 @@ static int siw_get_hdr(struct siw_rx_stream *srx) return -EAGAIN; } + /* + * Peer-controlled mpa_len must not underflow srx->fpdu_part_rem + * in siw_tcp_rx_data(); a negative value flows as a signed copy + * length into siw_check_mem() and skb_copy_bits(). + */ + if (unlikely(be16_to_cpu(c_hdr->mpa_len) + MPA_HDR_SIZE < + iwarp_pktinfo[opcode].hdr_len)) { + pr_warn_ratelimited("siw: short mpa_len %u for opcode %u (hdr_len %u)\n", + be16_to_cpu(c_hdr->mpa_len), opcode, + iwarp_pktinfo[opcode].hdr_len); + siw_init_terminate(rx_qp(srx), TERM_ERROR_LAYER_LLP, + LLP_ETYPE_MPA, LLP_ECODE_FPDU_START, 0); + return -EINVAL; + } + /* * DDP/RDMAP header receive completed. Check if the current * DDP segment starts a new RDMAP message or continues a previously -- cgit v1.2.3 From 4a9b16541ad3faf8bccb398532bf3f8b6bbf1188 Mon Sep 17 00:00:00 2001 From: Stephen Smalley Date: Wed, 13 May 2026 14:05:06 -0400 Subject: lsm: hold cred_guard_mutex for lsm_set_self_attr() Just as proc_pid_attr_write() already does before calling the LSM hook. This only matters for SELinux and AppArmor which check whether the process is being ptraced and if so, whether to allow the transition. Cc: stable@vger.kernel.org Signed-off-by: Stephen Smalley Acked-by: Casey Schaufler Signed-off-by: Paul Moore --- security/lsm_syscalls.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/security/lsm_syscalls.c b/security/lsm_syscalls.c index 5648b1f0ce9c..08a017669c02 100644 --- a/security/lsm_syscalls.c +++ b/security/lsm_syscalls.c @@ -57,7 +57,14 @@ u64 lsm_name_to_attr(const char *name) SYSCALL_DEFINE4(lsm_set_self_attr, unsigned int, attr, struct lsm_ctx __user *, ctx, u32, size, u32, flags) { - return security_setselfattr(attr, ctx, size, flags); + int rc; + + rc = mutex_lock_interruptible(¤t->signal->cred_guard_mutex); + if (rc < 0) + return rc; + rc = security_setselfattr(attr, ctx, size, flags); + mutex_unlock(¤t->signal->cred_guard_mutex); + return rc; } /** -- cgit v1.2.3 From aa13e4b120f9cf238ad141d8419851f3a7a3fb5f Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sun, 10 May 2026 13:23:40 -0700 Subject: perf trace: Sync linux/socket.h with the kernel source To pick up changes from: c66e0f453d1afa82 ("net: use ktime_t in struct scm_timestamping_internal") This would be used to beautify networking syscall arguments and not to affect builds of other tools (e.g. objtool). Please see tools/include/uapi/README. Reviewed-by: Ian Rogers Cc: netdev@vger.kernel.org Signed-off-by: Namhyung Kim --- tools/perf/trace/beauty/include/linux/socket.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/trace/beauty/include/linux/socket.h b/tools/perf/trace/beauty/include/linux/socket.h index ec715ad4bf25..ec4a0a025793 100644 --- a/tools/perf/trace/beauty/include/linux/socket.h +++ b/tools/perf/trace/beauty/include/linux/socket.h @@ -415,7 +415,7 @@ struct __kernel_timespec; struct old_timespec32; struct scm_timestamping_internal { - struct timespec64 ts[3]; + ktime_t ts[3]; }; extern void put_cmsg_scm_timestamping64(struct msghdr *msg, struct scm_timestamping_internal *tss); -- cgit v1.2.3 From b30e1493e3e27b6795244a472f0bbd07d0dc58fd Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sun, 10 May 2026 13:23:41 -0700 Subject: perf trace: Sync uapi/linux/fs.h with the kernel source To pick up changes from: 1f662195dbc07a66 ("fs: add generic FS_IOC_SHUTDOWN definitions") This would be used to beautify filesystem syscall arguments and not to affect builds of other tools (e.g. objtool). Please see tools/include/uapi/README. Reviewed-by: Ian Rogers Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Namhyung Kim --- tools/perf/trace/beauty/include/uapi/linux/fs.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/tools/perf/trace/beauty/include/uapi/linux/fs.h b/tools/perf/trace/beauty/include/uapi/linux/fs.h index 70b2b661f42c..13f71202845e 100644 --- a/tools/perf/trace/beauty/include/uapi/linux/fs.h +++ b/tools/perf/trace/beauty/include/uapi/linux/fs.h @@ -657,4 +657,16 @@ struct procmap_query { __u64 build_id_addr; /* in */ }; +/* + * Shutdown the filesystem. + */ +#define FS_IOC_SHUTDOWN _IOR('X', 125, __u32) + +/* + * Flags for FS_IOC_SHUTDOWN + */ +#define FS_SHUTDOWN_FLAGS_DEFAULT 0x0 +#define FS_SHUTDOWN_FLAGS_LOGFLUSH 0x1 /* flush log but not data*/ +#define FS_SHUTDOWN_FLAGS_NOLOGFLUSH 0x2 /* don't flush log nor data */ + #endif /* _UAPI_LINUX_FS_H */ -- cgit v1.2.3 From ca706027b5bdb37337e1b99752134d592f42f0ea Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sun, 10 May 2026 13:23:42 -0700 Subject: perf trace: Sync uapi/linux/mount.h with the kernel source To pick up changes from: 5e8969bd19271241 ("mount: add FSMOUNT_NAMESPACE") This would be used to beautify mount syscall arguments and not to affect builds of other tools (e.g. objtool). Please see tools/include/uapi/README. Reviewed-by: Ian Rogers Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Namhyung Kim --- tools/perf/trace/beauty/include/uapi/linux/mount.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/trace/beauty/include/uapi/linux/mount.h b/tools/perf/trace/beauty/include/uapi/linux/mount.h index d9d86598d100..2204708dbf7a 100644 --- a/tools/perf/trace/beauty/include/uapi/linux/mount.h +++ b/tools/perf/trace/beauty/include/uapi/linux/mount.h @@ -110,6 +110,7 @@ enum fsconfig_command { * fsmount() flags. */ #define FSMOUNT_CLOEXEC 0x00000001 +#define FSMOUNT_NAMESPACE 0x00000002 /* Create the mount in a new mount namespace */ /* * Mount attributes. -- cgit v1.2.3 From ad2cd6f9def4899591a75a96f71752e3aadb7579 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sun, 10 May 2026 13:23:43 -0700 Subject: perf trace: Sync uapi/linux/sched.h with the kernel source To pick up changes from: 9d4e752a24f740b3 ("namespace: allow creating empty mount namespaces") c8134b5f13ae959d ("pidfd: add CLONE_PIDFD_AUTOKILL") 24baca56fafc33d4 ("clone: add CLONE_NNP") 12ae2c81b21cfaa1 ("clone: add CLONE_AUTOREAP") 2e7af192697ef2a7 ("sched/deadline: Add reporting of runtime left & ...") This would be used to beautify scheduler syscall arguments and not to affect builds of other tools (e.g. objtool). Please see tools/include/uapi/README. Reviewed-by: Ian Rogers Signed-off-by: Namhyung Kim --- tools/perf/trace/beauty/include/uapi/linux/sched.h | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/tools/perf/trace/beauty/include/uapi/linux/sched.h b/tools/perf/trace/beauty/include/uapi/linux/sched.h index 359a14cc76a4..33a4624285cd 100644 --- a/tools/perf/trace/beauty/include/uapi/linux/sched.h +++ b/tools/perf/trace/beauty/include/uapi/linux/sched.h @@ -34,8 +34,12 @@ #define CLONE_IO 0x80000000 /* Clone io context */ /* Flags for the clone3() syscall. */ -#define CLONE_CLEAR_SIGHAND 0x100000000ULL /* Clear any signal handler and reset to SIG_DFL. */ -#define CLONE_INTO_CGROUP 0x200000000ULL /* Clone into a specific cgroup given the right permissions. */ +#define CLONE_CLEAR_SIGHAND (1ULL << 32) /* Clear any signal handler and reset to SIG_DFL. */ +#define CLONE_INTO_CGROUP (1ULL << 33) /* Clone into a specific cgroup given the right permissions. */ +#define CLONE_AUTOREAP (1ULL << 34) /* Auto-reap child on exit. */ +#define CLONE_NNP (1ULL << 35) /* Set no_new_privs on child. */ +#define CLONE_PIDFD_AUTOKILL (1ULL << 36) /* Kill child when clone pidfd closes. */ +#define CLONE_EMPTY_MNTNS (1ULL << 37) /* Create an empty mount namespace. */ /* * cloning flags intersect with CSIGNAL so can be used with unshare and clone3 @@ -43,6 +47,12 @@ */ #define CLONE_NEWTIME 0x00000080 /* New time namespace */ +/* + * unshare flags share the bit space with clone flags but only apply to the + * unshare syscall: + */ +#define UNSHARE_EMPTY_MNTNS 0x00100000 /* Unshare an empty mount namespace. */ + #ifndef __ASSEMBLY__ /** * struct clone_args - arguments for the clone3 syscall @@ -146,4 +156,7 @@ struct clone_args { SCHED_FLAG_KEEP_ALL | \ SCHED_FLAG_UTIL_CLAMP) +/* Only for sched_getattr() own flag param, if task is SCHED_DEADLINE */ +#define SCHED_GETATTR_FLAG_DL_DYNAMIC 0x01 + #endif /* _UAPI_LINUX_SCHED_H */ -- cgit v1.2.3 From be81aed3f7492caa522493f7c67b9c4d3c8924a6 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sun, 10 May 2026 13:23:44 -0700 Subject: perf build: Add make check-headers target Don't print header differences during the perf build as it's noisy. Mostly people won't care and find it annoying. As it's to improve perf trace beautifier to catch up new changes mostly in UAPIs, we can make it a separate build target and call it occasionally. Make it and build-test related targets phony. Reviewed-by: Ian Rogers Signed-off-by: Namhyung Kim --- tools/perf/Makefile | 5 ++++- tools/perf/Makefile.perf | 1 - 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 816d5d84816b..5b713837eede 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -111,6 +111,9 @@ build-test: build-test-tarball: @$(MAKE) -f tests/make REUSE_FEATURES_DUMP=1 MK=Makefile SET_PARALLEL=1 --no-print-directory out +check-headers: + @./check-headers.sh + # # All other targets get passed through: # @@ -118,4 +121,4 @@ build-test-tarball: $(print_msg) $(make) -.PHONY: tags TAGS FORCE Makefile +.PHONY: tags TAGS FORCE Makefile build-test build-test-tarball check-headers diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index cee19c923c06..585637fc934f 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -285,7 +285,6 @@ goals := $(filter-out all sub-make, $(MAKECMDGOALS)) $(goals) all: sub-make sub-make: fixdep - @./check-headers.sh $(Q)$(MAKE) FIXDEP_BUILT=1 -f Makefile.perf $(goals) else # force_fixdep -- cgit v1.2.3 From 552636b9317c8a843dd4496d77e56976ab48c76b Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sun, 10 May 2026 13:23:45 -0700 Subject: perf trace: Add beautifier script for fsmount flags And move the existing one to fsmount_attr.sh to be more precise. Now the fsmount_flags[] is generated from the mount.h like below. The ilog2() + 1 is an existing pattern to handle bit flags. $ cat tools/perf/trace/beauty/generated/fsmount_arrays.c static const char *fsmount_flags[] = { [ilog2(0x00000001) + 1] = "CLOEXEC", [ilog2(0x00000002) + 1] = "NAMESPACE", }; It was found by Sashiko during the review. Reviewed-by: Ian Rogers Signed-off-by: Namhyung Kim --- tools/perf/Makefile.perf | 8 ++++++++ tools/perf/builtin-trace.c | 9 +++------ tools/perf/trace/beauty/beauty.h | 3 +++ tools/perf/trace/beauty/fsmount.c | 18 +++++++++++++++++- tools/perf/trace/beauty/fsmount.sh | 11 +++-------- tools/perf/trace/beauty/fsmount_attr.sh | 22 ++++++++++++++++++++++ 6 files changed, 56 insertions(+), 15 deletions(-) create mode 100644 tools/perf/trace/beauty/fsmount_attr.sh diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf index 585637fc934f..76b35ac19acb 100644 --- a/tools/perf/Makefile.perf +++ b/tools/perf/Makefile.perf @@ -564,6 +564,12 @@ fsmount_tbls := $(srctree)/tools/perf/trace/beauty/fsmount.sh $(fsmount_arrays): $(beauty_uapi_linux_dir)/mount.h $(fsmount_tbls) $(Q)$(SHELL) '$(fsmount_tbls)' $(beauty_uapi_linux_dir) > $@ +fsmount_attr_arrays := $(beauty_outdir)/fsmount_attr_arrays.c +fsmount_attr_tbls := $(srctree)/tools/perf/trace/beauty/fsmount_attr.sh + +$(fsmount_attr_arrays): $(beauty_uapi_linux_dir)/mount.h $(fsmount_attr_tbls) + $(Q)$(SHELL) '$(fsmount_attr_tbls)' $(beauty_uapi_linux_dir) > $@ + fspick_arrays := $(beauty_outdir)/fspick_arrays.c fspick_tbls := $(srctree)/tools/perf/trace/beauty/fspick.sh @@ -854,6 +860,7 @@ prepare: $(OUTPUT)PERF-VERSION-FILE archheaders \ $(fadvise_advice_array) \ $(fsconfig_arrays) \ $(fsmount_arrays) \ + $(fsmount_attr_arrays) \ $(fspick_arrays) \ $(pkey_alloc_access_rights_array) \ $(sndrv_pcm_ioctl_array) \ @@ -1301,6 +1308,7 @@ clean:: $(LIBAPI)-clean $(LIBBPF)-clean $(LIBSUBCMD)-clean $(LIBSYMBOL)-clean $( $(OUTPUT)$(fadvise_advice_array) \ $(OUTPUT)$(fsconfig_arrays) \ $(OUTPUT)$(fsmount_arrays) \ + $(OUTPUT)$(fsmount_attr_arrays) \ $(OUTPUT)$(fspick_arrays) \ $(OUTPUT)$(madvise_behavior_array) \ $(OUTPUT)$(mmap_flags_array) \ diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c index e58c49d047a2..48615ddccd93 100644 --- a/tools/perf/builtin-trace.c +++ b/tools/perf/builtin-trace.c @@ -771,11 +771,6 @@ static const char *bpf_cmd[] = { }; static DEFINE_STRARRAY(bpf_cmd, "BPF_"); -static const char *fsmount_flags[] = { - [1] = "CLOEXEC", -}; -static DEFINE_STRARRAY(fsmount_flags, "FSMOUNT_"); - #include "trace/beauty/generated/fsconfig_arrays.c" static DEFINE_STRARRAY(fsconfig_cmds, "FSCONFIG_"); @@ -1202,7 +1197,9 @@ static const struct syscall_fmt syscall_fmts[] = { { .name = "fsconfig", .arg = { [1] = STRARRAY(cmd, fsconfig_cmds), }, }, { .name = "fsmount", - .arg = { [1] = STRARRAY_FLAGS(flags, fsmount_flags), + .arg = { [1] = { .scnprintf = SCA_FSMOUNT_FLAGS, /* fsmount_flags */ + .strtoul = STUL_STRARRAYS, + .show_zero = true, }, [2] = { .scnprintf = SCA_FSMOUNT_ATTR_FLAGS, /* attr_flags */ }, }, }, { .name = "fspick", .arg = { [0] = { .scnprintf = SCA_FDAT, /* dfd */ }, diff --git a/tools/perf/trace/beauty/beauty.h b/tools/perf/trace/beauty/beauty.h index 0a07ad158f87..a90c35fa5c12 100644 --- a/tools/perf/trace/beauty/beauty.h +++ b/tools/perf/trace/beauty/beauty.h @@ -179,6 +179,9 @@ size_t syscall_arg__scnprintf_fcntl_arg(char *bf, size_t size, struct syscall_ar size_t syscall_arg__scnprintf_flock(char *bf, size_t size, struct syscall_arg *arg); #define SCA_FLOCK syscall_arg__scnprintf_flock +size_t syscall_arg__scnprintf_fsmount_flags(char *bf, size_t size, struct syscall_arg *arg); +#define SCA_FSMOUNT_FLAGS syscall_arg__scnprintf_fsmount_flags + size_t syscall_arg__scnprintf_fsmount_attr_flags(char *bf, size_t size, struct syscall_arg *arg); #define SCA_FSMOUNT_ATTR_FLAGS syscall_arg__scnprintf_fsmount_attr_flags diff --git a/tools/perf/trace/beauty/fsmount.c b/tools/perf/trace/beauty/fsmount.c index 28c2c16fc1a8..179e649fc72a 100644 --- a/tools/perf/trace/beauty/fsmount.c +++ b/tools/perf/trace/beauty/fsmount.c @@ -16,9 +16,25 @@ #define MOUNT_ATTR_RELATIME 0x00000000 /* - Update atime relative to mtime/ctime. */ #endif -static size_t fsmount__scnprintf_attr_flags(unsigned long flags, char *bf, size_t size, bool show_prefix) + +static size_t fsmount__scnprintf_flags(unsigned long flags, char *bf, size_t size, bool show_prefix) { #include "trace/beauty/generated/fsmount_arrays.c" + static DEFINE_STRARRAY(fsmount_flags, "FSMOUNT_"); + + return strarray__scnprintf_flags(&strarray__fsmount_flags, bf, size, show_prefix, flags); +} + +size_t syscall_arg__scnprintf_fsmount_flags(char *bf, size_t size, struct syscall_arg *arg) +{ + unsigned long flags = arg->val; + + return fsmount__scnprintf_flags(flags, bf, size, arg->show_string_prefix); +} + +static size_t fsmount__scnprintf_attr_flags(unsigned long flags, char *bf, size_t size, bool show_prefix) +{ +#include "trace/beauty/generated/fsmount_attr_arrays.c" static DEFINE_STRARRAY(fsmount_attr_flags, "MOUNT_ATTR_"); size_t printed = 0; diff --git a/tools/perf/trace/beauty/fsmount.sh b/tools/perf/trace/beauty/fsmount.sh index 6b67a54cdeee..6d1e80bc15e4 100755 --- a/tools/perf/trace/beauty/fsmount.sh +++ b/tools/perf/trace/beauty/fsmount.sh @@ -9,14 +9,9 @@ fi linux_mount=${beauty_uapi_linux_dir}/mount.h -# Remove MOUNT_ATTR_RELATIME as it is zeros, handle it a special way in the beautifier -# Only handle MOUNT_ATTR_ followed by a capital letter/num as __ is special case -# for things like MOUNT_ATTR__ATIME that is a mask for the possible ATIME handling -# bits. Special case it as well in the beautifier - -printf "static const char *fsmount_attr_flags[] = {\n" -regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MOUNT_ATTR_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*' -grep -E $regex ${linux_mount} | grep -v MOUNT_ATTR_RELATIME | \ +printf "static const char *fsmount_flags[] = {\n" +regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+FSMOUNT_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*' +grep -E $regex ${linux_mount} | \ sed -r "s/$regex/\2 \1/g" | \ xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n" printf "};\n" diff --git a/tools/perf/trace/beauty/fsmount_attr.sh b/tools/perf/trace/beauty/fsmount_attr.sh new file mode 100644 index 000000000000..6b67a54cdeee --- /dev/null +++ b/tools/perf/trace/beauty/fsmount_attr.sh @@ -0,0 +1,22 @@ +#!/bin/sh +# SPDX-License-Identifier: LGPL-2.1 + +if [ $# -ne 1 ] ; then + beauty_uapi_linux_dir=tools/perf/trace/beauty/include/uapi/linux/ +else + beauty_uapi_linux_dir=$1 +fi + +linux_mount=${beauty_uapi_linux_dir}/mount.h + +# Remove MOUNT_ATTR_RELATIME as it is zeros, handle it a special way in the beautifier +# Only handle MOUNT_ATTR_ followed by a capital letter/num as __ is special case +# for things like MOUNT_ATTR__ATIME that is a mask for the possible ATIME handling +# bits. Special case it as well in the beautifier + +printf "static const char *fsmount_attr_flags[] = {\n" +regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+MOUNT_ATTR_([[:alnum:]][[:alnum:]_]+)[[:space:]]+(0x[[:xdigit:]]+)[[:space:]]*.*' +grep -E $regex ${linux_mount} | grep -v MOUNT_ATTR_RELATIME | \ + sed -r "s/$regex/\2 \1/g" | \ + xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n" +printf "};\n" -- cgit v1.2.3 From 5a433107fab621f4e7379ccba6e52b5b1601046c Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sun, 10 May 2026 13:23:46 -0700 Subject: perf trace: Update beautifier script for clone flags According to the change in the sched.h, update the script to generate the flags array like below. Note that '+1' is needed to detect bitmask pattern at index 0. $ cat tools/perf/trace/beauty/generated/clone_flags_array.c static const char *clone_flags[] = { [ilog2(0x00000100) + 1] = "VM", [ilog2(0x00000200) + 1] = "FS", [ilog2(0x00000400) + 1] = "FILES", [ilog2(0x00000800) + 1] = "SIGHAND", [ilog2(0x00001000) + 1] = "PIDFD", [ilog2(0x00002000) + 1] = "PTRACE", [ilog2(0x00004000) + 1] = "VFORK", [ilog2(0x00008000) + 1] = "PARENT", [ilog2(0x00010000) + 1] = "THREAD", [ilog2(0x00020000) + 1] = "NEWNS", [ilog2(0x00040000) + 1] = "SYSVSEM", [ilog2(0x00080000) + 1] = "SETTLS", [ilog2(0x00100000) + 1] = "PARENT_SETTID", [ilog2(0x00200000) + 1] = "CHILD_CLEARTID", [ilog2(0x00400000) + 1] = "DETACHED", [ilog2(0x00800000) + 1] = "UNTRACED", [ilog2(0x01000000) + 1] = "CHILD_SETTID", [ilog2(0x02000000) + 1] = "NEWCGROUP", [ilog2(0x04000000) + 1] = "NEWUTS", [ilog2(0x08000000) + 1] = "NEWIPC", [ilog2(0x10000000) + 1] = "NEWUSER", [ilog2(0x20000000) + 1] = "NEWPID", [ilog2(0x40000000) + 1] = "NEWNET", [ilog2(0x80000000) + 1] = "IO", [ilog2(0x00000080) + 1] = "NEWTIME", [32 + 1] = "CLEAR_SIGHAND", [33 + 1] = "INTO_CGROUP", [34 + 1] = "AUTOREAP", [35 + 1] = "NNP", [36 + 1] = "PIDFD_AUTOKILL", [37 + 1] = "EMPTY_MNTNS", }; This was found by Sashiko during review. Reviewed-by: Ian Rogers Signed-off-by: Namhyung Kim --- tools/perf/trace/beauty/clone.sh | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/perf/trace/beauty/clone.sh b/tools/perf/trace/beauty/clone.sh index 18b6c0d75693..98cb1f8d4a6f 100755 --- a/tools/perf/trace/beauty/clone.sh +++ b/tools/perf/trace/beauty/clone.sh @@ -14,4 +14,8 @@ regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+CLONE_([^_]+[[:alnum:]_]+)[[: grep -E $regex ${linux_sched} | \ sed -r "s/$regex/\2 \1/g" | \ xargs printf "\t[ilog2(%s) + 1] = \"%s\",\n" +regex='^[[:space:]]*#[[:space:]]*define[[:space:]]+CLONE_([^_]+[[:alnum:]_]+)[[:space:]]+\(1ULL[[:space:]]*<<[[:space:]]*([[:digit:]]+)\)[[:space:]]*.*' +grep -E $regex ${linux_sched} | \ + sed -r "s/$regex/\2 \1/g" | \ + xargs printf "\t[%s + 1] = \"%s\",\n" printf "};\n" -- cgit v1.2.3 From 0c0dddc07d272a8d25922e48041e8e4d2434df7e Mon Sep 17 00:00:00 2001 From: Ralf Lici Date: Wed, 13 May 2026 15:26:10 +0200 Subject: ovpn: disable BHs when updating device stats ovpn updates dev->dstats from both process and softirq contexts. In particular, TCP paths may run from socket callbacks, workqueues or strparser work, while UDP receive and ovpn's ndo_start_xmit path may update the same per-device dstats from BH context. Add ovpn device drop-stat helpers that disable BHs around dev_dstats_rx_dropped() and dev_dstats_tx_dropped(), and use them for drop accounting. The successful RX dev_dstats_rx_add() update is already covered by the BH-disabled section around gro_cells_receive(). For the successful TCP TX dev_dstats_tx_add() update, replace the existing preempt-disabled section with a BH-disabled one. Fixes: 11851cbd60ea ("ovpn: implement TCP transport") Signed-off-by: Ralf Lici Signed-off-by: Antonio Quartulli --- drivers/net/ovpn/io.c | 12 ++++++------ drivers/net/ovpn/stats.h | 16 ++++++++++++++++ drivers/net/ovpn/tcp.c | 10 +++++----- drivers/net/ovpn/udp.c | 2 +- 4 files changed, 28 insertions(+), 12 deletions(-) diff --git a/drivers/net/ovpn/io.c b/drivers/net/ovpn/io.c index 22c555dd962e..a6b777a9c2d9 100644 --- a/drivers/net/ovpn/io.c +++ b/drivers/net/ovpn/io.c @@ -201,7 +201,7 @@ void ovpn_decrypt_post(void *data, int ret) skb = NULL; drop: if (unlikely(skb)) - dev_dstats_rx_dropped(peer->ovpn->dev); + ovpn_dev_dstats_rx_dropped(peer->ovpn->dev); kfree_skb(skb); drop_nocount: if (likely(peer)) @@ -225,7 +225,7 @@ void ovpn_recv(struct ovpn_peer *peer, struct sk_buff *skb) net_info_ratelimited("%s: no available key for peer %u, key-id: %u\n", netdev_name(peer->ovpn->dev), peer->id, key_id); - dev_dstats_rx_dropped(peer->ovpn->dev); + ovpn_dev_dstats_rx_dropped(peer->ovpn->dev); kfree_skb(skb); ovpn_peer_put(peer); return; @@ -301,7 +301,7 @@ err_unlock: rcu_read_unlock(); err: if (unlikely(skb)) - dev_dstats_tx_dropped(peer->ovpn->dev); + ovpn_dev_dstats_tx_dropped(peer->ovpn->dev); if (likely(peer)) ovpn_peer_put(peer); if (likely(ks)) @@ -343,7 +343,7 @@ static void ovpn_send(struct ovpn_priv *ovpn, struct sk_buff *skb, */ skb_list_walk_safe(skb, curr, next) { if (unlikely(!ovpn_encrypt_one(peer, curr))) { - dev_dstats_tx_dropped(ovpn->dev); + ovpn_dev_dstats_tx_dropped(ovpn->dev); kfree_skb(curr); } } @@ -414,7 +414,7 @@ netdev_tx_t ovpn_net_xmit(struct sk_buff *skb, struct net_device *dev) if (unlikely(!curr)) { net_err_ratelimited("%s: skb_share_check failed for payload packet\n", netdev_name(dev)); - dev_dstats_tx_dropped(ovpn->dev); + ovpn_dev_dstats_tx_dropped(ovpn->dev); continue; } @@ -440,7 +440,7 @@ netdev_tx_t ovpn_net_xmit(struct sk_buff *skb, struct net_device *dev) drop: ovpn_peer_put(peer); drop_no_peer: - dev_dstats_tx_dropped(ovpn->dev); + ovpn_dev_dstats_tx_dropped(ovpn->dev); skb_tx_error(skb); kfree_skb_list(skb); return NETDEV_TX_OK; diff --git a/drivers/net/ovpn/stats.h b/drivers/net/ovpn/stats.h index 53433d8b6c33..3a45b97c0056 100644 --- a/drivers/net/ovpn/stats.h +++ b/drivers/net/ovpn/stats.h @@ -11,6 +11,8 @@ #ifndef _NET_OVPN_OVPNSTATS_H_ #define _NET_OVPN_OVPNSTATS_H_ +#include + /* one stat */ struct ovpn_peer_stat { atomic64_t bytes; @@ -44,4 +46,18 @@ static inline void ovpn_peer_stats_increment_tx(struct ovpn_peer_stats *stats, ovpn_peer_stats_increment(&stats->tx, n); } +static inline void ovpn_dev_dstats_tx_dropped(struct net_device *dev) +{ + local_bh_disable(); + dev_dstats_tx_dropped(dev); + local_bh_enable(); +} + +static inline void ovpn_dev_dstats_rx_dropped(struct net_device *dev) +{ + local_bh_disable(); + dev_dstats_rx_dropped(dev); + local_bh_enable(); +} + #endif /* _NET_OVPN_OVPNSTATS_H_ */ diff --git a/drivers/net/ovpn/tcp.c b/drivers/net/ovpn/tcp.c index 82809b016f0a..433bd07a4f1b 100644 --- a/drivers/net/ovpn/tcp.c +++ b/drivers/net/ovpn/tcp.c @@ -152,7 +152,7 @@ err: if (WARN_ON(!ovpn_peer_hold(peer))) goto err_nopeer; schedule_work(&peer->tcp.defer_del_work); - dev_dstats_rx_dropped(peer->ovpn->dev); + ovpn_dev_dstats_rx_dropped(peer->ovpn->dev); err_nopeer: kfree_skb(skb); } @@ -298,9 +298,9 @@ static void ovpn_tcp_send_sock(struct ovpn_peer *peer, struct sock *sk) } while (peer->tcp.out_msg.len > 0); if (!peer->tcp.out_msg.len) { - preempt_disable(); + local_bh_disable(); dev_dstats_tx_add(peer->ovpn->dev, skb->len); - preempt_enable(); + local_bh_enable(); } kfree_skb(peer->tcp.out_msg.skb); @@ -331,7 +331,7 @@ static void ovpn_tcp_send_sock_skb(struct ovpn_peer *peer, struct sock *sk, ovpn_tcp_send_sock(peer, sk); if (peer->tcp.out_msg.skb) { - dev_dstats_tx_dropped(peer->ovpn->dev); + ovpn_dev_dstats_tx_dropped(peer->ovpn->dev); kfree_skb(skb); return; } @@ -353,7 +353,7 @@ void ovpn_tcp_send_skb(struct ovpn_peer *peer, struct sock *sk, if (sock_owned_by_user(sk)) { if (skb_queue_len(&peer->tcp.out_queue) >= READ_ONCE(net_hotdata.max_backlog)) { - dev_dstats_tx_dropped(peer->ovpn->dev); + ovpn_dev_dstats_tx_dropped(peer->ovpn->dev); kfree_skb(skb); goto unlock; } diff --git a/drivers/net/ovpn/udp.c b/drivers/net/ovpn/udp.c index 059e896b4a2f..8811aa9eedeb 100644 --- a/drivers/net/ovpn/udp.c +++ b/drivers/net/ovpn/udp.c @@ -125,7 +125,7 @@ static int ovpn_udp_encap_recv(struct sock *sk, struct sk_buff *skb) return 0; drop: - dev_dstats_rx_dropped(ovpn->dev); + ovpn_dev_dstats_rx_dropped(ovpn->dev); drop_noovpn: kfree_skb(skb); return 0; -- cgit v1.2.3 From d2bfdbb69cf87676981b1043010b6224d84c6d3a Mon Sep 17 00:00:00 2001 From: Maoyi Xie Date: Tue, 12 May 2026 22:28:07 +0800 Subject: rds_tcp: close NULL deref window in rds_tcp_set_callbacks rds_tcp_set_callbacks() links a new rds_tcp_connection onto rds_tcp_tc_list under rds_tcp_tc_list_lock. It releases the lock, then assigns tc->t_sock = sock outside the lock. rds_tcp_tc_info() and rds6_tcp_tc_info() walk rds_tcp_tc_list under the same lock. Both dereference tc->t_sock->sk without a NULL check. A reader can acquire rds_tcp_tc_list_lock between the writer's spin_unlock and the t_sock store. It then sees a list entry whose t_sock is NULL. The dereference of tc->t_sock->sk is a NULL access. Move tc->t_sock = sock inside rds_tcp_tc_list_lock, before list_add_tail. A reader holding the lock then observes the linkage and the t_sock store together. The restore path is safe. rds_tcp_restore_callbacks() does list_del_init inside the lock. The matching tc->t_sock = NULL after unlink is harmless to readers holding the lock. Fixes: 70041088e3b9 ("RDS: Add TCP transport to RDS") Suggested-by: Simon Horman Signed-off-by: Maoyi Xie Reviewed-by: Allison Henderson Link: https://patch.msgid.link/20260512142807.1855619-1-maoyi.xie@ntu.edu.sg Signed-off-by: Jakub Kicinski --- net/rds/tcp.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/rds/tcp.c b/net/rds/tcp.c index 654e23d13e3d..5830b31a1f37 100644 --- a/net/rds/tcp.c +++ b/net/rds/tcp.c @@ -198,8 +198,13 @@ void rds_tcp_set_callbacks(struct socket *sock, struct rds_conn_path *cp) rdsdebug("setting sock %p callbacks to tc %p\n", sock, tc); write_lock_bh(&sock->sk->sk_callback_lock); - /* done under the callback_lock to serialize with write_space */ + /* done under the callback_lock to serialize with write_space. + * Set t_sock inside rds_tcp_tc_list_lock so readers walking + * rds_tcp_tc_list under the same lock cannot observe an + * entry whose t_sock is NULL. + */ spin_lock(&rds_tcp_tc_list_lock); + tc->t_sock = sock; list_add_tail(&tc->t_list_item, &rds_tcp_tc_list); #if IS_ENABLED(CONFIG_IPV6) rds6_tcp_tc_count++; @@ -211,8 +216,6 @@ void rds_tcp_set_callbacks(struct socket *sock, struct rds_conn_path *cp) /* accepted sockets need our listen data ready undone */ if (sock->sk->sk_data_ready == rds_tcp_listen_data_ready) sock->sk->sk_data_ready = sock->sk->sk_user_data; - - tc->t_sock = sock; if (!tc->t_rtn) tc->t_rtn = net_generic(sock_net(sock->sk), rds_tcp_netid); tc->t_cpath = cp; -- cgit v1.2.3 From 7d260c5d2d89eb2c8c528d54b576b3aae3e20231 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Wed, 13 May 2026 12:22:26 +0100 Subject: net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after mlx5e_safe_reopen_channels() has torn down and freed the channel (and its embedded SQs). Replace the three sq->netdev references with priv->netdev which is safe because priv outlives channel teardown. The netdev_err() call already used priv->netdev for this reason; make the trylock/unlock and health_channel_eq_recover calls consistent. This fixes the following KASAN splat: BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core] Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277 Call Trace: mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core] devlink_health_reporter_recover+0xa2/0x150 devlink_health_report+0x254/0x7c0 mlx5e_reporter_tx_timeout+0x297/0x380 [mlx5_core] mlx5e_tx_timeout_work+0x109/0x170 [mlx5_core] process_one_work+0x677/0xf20 worker_thread+0x51f/0xd90 kthread+0x3a5/0x810 ret_from_fork+0x208/0x400 ret_from_fork_asm+0x1a/0x30 Fixes: 83ac0304a2d7 ("net/mlx5e: Fix deadlocks between devlink and netdev instance locks") Cc: stable@vger.kernel.org Reviewed-by: Cosmin Ratiu Reviewed-by: Tariq Toukan Signed-off-by: Matt Fleming Link: https://patch.msgid.link/20260513112226.140512-1-matt@readmodwrite.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c index afdeb1b3d425..8409ae73768f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c @@ -160,13 +160,13 @@ static int mlx5e_tx_reporter_timeout_recover(void *ctx) * channels are being closed for other reason and this work is not * relevant anymore. */ - while (!netdev_trylock(sq->netdev)) { + while (!netdev_trylock(priv->netdev)) { if (!test_bit(MLX5E_STATE_CHANNELS_ACTIVE, &priv->state)) return 0; msleep(20); } - err = mlx5e_health_channel_eq_recover(sq->netdev, eq, sq->cq.ch_stats); + err = mlx5e_health_channel_eq_recover(priv->netdev, eq, sq->cq.ch_stats); if (!err) { to_ctx->status = 0; /* this sq recovered */ goto out; @@ -186,7 +186,7 @@ static int mlx5e_tx_reporter_timeout_recover(void *ctx) "mlx5e_safe_reopen_channels failed recovering from a tx_timeout, err(%d).\n", err); out: - netdev_unlock(sq->netdev); + netdev_unlock(priv->netdev); return err; } -- cgit v1.2.3 From f84eca5817390257cef78013d0112481c503b4a3 Mon Sep 17 00:00:00 2001 From: William Bowling Date: Wed, 13 May 2026 04:16:35 +0000 Subject: net: skbuff: preserve shared-frag marker during coalescing skb_try_coalesce() can attach paged frags from @from to @to. If @from has SKBFL_SHARED_FRAG set, the resulting @to skb can contain the same externally-owned or page-cache-backed frags, but the shared-frag marker is currently lost. That breaks the invariant relied on by later in-place writers. In particular, ESP input checks skb_has_shared_frag() before deciding whether an uncloned nonlinear skb can skip skb_cow_data(). If TCP receive coalescing has moved shared frags into an unmarked skb, ESP can see skb_has_shared_frag() as false and decrypt in place over page-cache backed frags. Propagate SKBFL_SHARED_FRAG when skb_try_coalesce() transfers paged frags. The tailroom copy path does not need the marker because it copies bytes into @to's linear data rather than transferring frag descriptors. Fixes: cef401de7be8 ("net: fix possible wrong checksum generation") Fixes: f4c50a4034e6 ("xfrm: esp: avoid in-place decrypt on shared skb frags") Signed-off-by: William Bowling Reviewed-by: Eric Dumazet Tested-by: Jiayuan Chen Link: https://patch.msgid.link/20260513041635.1289541-1-vakzz@zellic.io Signed-off-by: Jakub Kicinski --- net/core/skbuff.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 7dad68e3b518..9c4e8d331d6d 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -6200,6 +6200,8 @@ bool skb_try_coalesce(struct sk_buff *to, struct sk_buff *from, from_shinfo->frags, from_shinfo->nr_frags * sizeof(skb_frag_t)); to_shinfo->nr_frags += from_shinfo->nr_frags; + if (from_shinfo->nr_frags) + to_shinfo->flags |= from_shinfo->flags & SKBFL_SHARED_FRAG; if (!skb_cloned(from)) from_shinfo->nr_frags = 0; -- cgit v1.2.3 From e8fb3de2a8effcaf62bec2c56b93d8bb480371d1 Mon Sep 17 00:00:00 2001 From: Dawei Feng Date: Wed, 13 May 2026 23:13:20 +0800 Subject: octeontx2-pf: fix double free in rvu_rep_rsrc_init() rvu_rep_rsrc_init() allocates queue memory before calling otx2_init_hw_resources(). When hardware resource setup fails, otx2_init_hw_resources() already unwinds the partially initialized SQ, CQ, and aura state before returning an error. The representor error path then calls otx2_free_hw_resources() again and can free the same resources a second time. Fix this by splitting the cleanup labels so that a failure from otx2_init_hw_resources() only releases queue memory. Keep the otx2_free_hw_resources() call for failures that happen after hardware resource initialization completed successfully. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2 representor hardware. Fixes: 3937b7308d4f ("octeontx2-pf: Create representor netdev") Cc: stable@vger.kernel.org # v6.13+ Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Reviewed-by: Geetha sowjanya Link: https://patch.msgid.link/20260513151320.213260-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/octeontx2/nic/rep.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/rep.c b/drivers/net/ethernet/marvell/octeontx2/nic/rep.c index 94f155ffb17f..0f5d5642d3f7 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/rep.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/rep.c @@ -609,7 +609,7 @@ static int rvu_rep_rsrc_init(struct otx2_nic *priv) err = otx2_init_hw_resources(priv); if (err) - goto err_free_rsrc; + goto err_free_mem; /* Set maximum frame size allowed in HW */ err = otx2_hw_set_mtu(priv, priv->hw.max_mtu); @@ -621,6 +621,7 @@ static int rvu_rep_rsrc_init(struct otx2_nic *priv) err_free_rsrc: otx2_free_hw_resources(priv); +err_free_mem: otx2_free_queue_mem(qset); return err; } -- cgit v1.2.3 From f508262ae9f21fe0e6c0749948b9dc7dd5a62a70 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Wed, 13 May 2026 08:58:25 -0400 Subject: tls: Preserve sk_err across recvmsg() when data has been copied The sk_err check in tls_rx_rec_wait() consumes the error via sock_error(), which clears sk_err atomically. When the caller (tls_sw_recvmsg, tls_sw_splice_read, or tls_sw_read_sock) already has bytes copied to userspace, it returns those bytes and discards the error from this call. sk_err is now zero on the socket, so the next read syscall observes only RCV_SHUTDOWN and reports a clean EOF instead of the actual error (typically -ECONNRESET). The race is reachable when tls_read_flush_backlog()'s periodic sk_flush_backlog() triggers tcp_reset() in the middle of a multi-record read. Pass a has_copied flag to tls_rx_rec_wait(). When has_copied is false, consume sk_err via sock_error() as before. When has_copied is true, report the error from READ_ONCE() but leave sk_err set: the caller returns the byte count and discards the err from this call, and the next read syscall surfaces the preserved sk_err. This mirrors the tcp_recvmsg() preserve-and-surface pattern. The decrypt-abort path is unaffected: tls_err_abort() raises sk_err to EBADMSG after tls_rx_rec_wait() returns, and nothing on the caller's return path consumes it, so the EBADMSG surfaces on the next read. tls_sw_splice_read() passes has_copied=false: it processes one record per call, so no bytes have been copied within the function when tls_rx_rec_wait() runs. A reset that arrives between iterations of splice_direct_to_actor() (the sendfile() path) is still consumed by sock_error() in the later call, and the outer loop returns the prior iterations' byte count and drops the error. tcp_splice_read() exhibits the same pattern at the iteration boundary; addressing it belongs at the splice_direct_to_actor() layer and is out of scope here. Fixes: c46b01839f7a ("tls: rx: periodically flush socket backlog") Suggested-by: Jakub Kicinski Signed-off-by: Chuck Lever Link: https://patch.msgid.link/20260513125825.205189-1-cel@kernel.org Signed-off-by: Jakub Kicinski --- net/tls/tls_sw.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index 3bfdaf5e64f5..964ebc268ee4 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -1366,9 +1366,14 @@ unlock: mutex_unlock(&tls_ctx->tx_lock); } +/* When has_copied is true the caller has already moved bytes to + * userspace. Report sk_err but leave it set so the next read + * surfaces it instead of a spurious EOF, otherwise sk_err is + * consumed via sock_error(). + */ static int tls_rx_rec_wait(struct sock *sk, struct sk_psock *psock, bool nonblock, - bool released) + bool released, bool has_copied) { struct tls_context *tls_ctx = tls_get_ctx(sk); struct tls_sw_context_rx *ctx = tls_sw_ctx_rx(tls_ctx); @@ -1386,8 +1391,11 @@ tls_rx_rec_wait(struct sock *sk, struct sk_psock *psock, bool nonblock, if (!sk_psock_queue_empty(psock)) return 0; - if (sk->sk_err) + if (sk->sk_err) { + if (has_copied) + return -READ_ONCE(sk->sk_err); return sock_error(sk); + } if (ret < 0) return ret; @@ -1423,7 +1431,7 @@ tls_rx_rec_wait(struct sock *sk, struct sk_psock *psock, bool nonblock, } if (unlikely(!tls_strp_msg_load(&ctx->strp, released))) - return tls_rx_rec_wait(sk, psock, nonblock, false); + return tls_rx_rec_wait(sk, psock, nonblock, false, has_copied); return 1; } @@ -2110,7 +2118,7 @@ int tls_sw_recvmsg(struct sock *sk, int to_decrypt, chunk; err = tls_rx_rec_wait(sk, psock, flags & MSG_DONTWAIT, - released); + released, !!(decrypted + copied)); if (err <= 0) { if (psock) { chunk = sk_msg_recvmsg(sk, psock, msg, len, @@ -2297,7 +2305,7 @@ ssize_t tls_sw_splice_read(struct socket *sock, loff_t *ppos, struct tls_decrypt_arg darg; err = tls_rx_rec_wait(sk, NULL, flags & SPLICE_F_NONBLOCK, - true); + true, false); if (err <= 0) goto splice_read_end; @@ -2383,7 +2391,7 @@ int tls_sw_read_sock(struct sock *sk, read_descriptor_t *desc, } else { struct tls_decrypt_arg darg; - err = tls_rx_rec_wait(sk, NULL, true, released); + err = tls_rx_rec_wait(sk, NULL, true, released, !!copied); if (err <= 0) goto read_sock_end; -- cgit v1.2.3 From c9d08c8c4c5006d71b3c3c3c0dc41ebc46931951 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Wed, 13 May 2026 09:27:37 +0300 Subject: net/mlx5e: Don't leak RSS context in case of error If mlx5e_rx_res_rss_set_rxfh() fails during mlx5e_create_rxfh_context(), the RSS context is not cleaned up. This leaves a stale entry in 'res->rss[rss_idx]' that occupies a context slot. Destroy the RSS context before returning the error. Fixes: 6c2509d44636 ("net/mlx5e: Add error flow for ethtool -X command") Signed-off-by: Gal Pressman Reviewed-by: Nimrod Oren Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/20260513062737.333259-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index bb61e2179078..99a0034b9b20 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -1574,8 +1574,11 @@ static int mlx5e_create_rxfh_context(struct net_device *dev, rxfh->indir, rxfh->key, hfunc == ETH_RSS_HASH_NO_CHANGE ? NULL : &hfunc, rxfh->input_xfrm == RXH_XFRM_NO_CHANGE ? NULL : &symmetric); - if (err) + if (err) { + WARN_ON(mlx5e_rx_res_rss_destroy(priv->rx_res, + rxfh->rss_context)); goto unlock; + } mlx5e_rx_res_rss_get_rxfh(priv->rx_res, rxfh->rss_context, ethtool_rxfh_context_indir(ctx), -- cgit v1.2.3 From 8d0a5af8b1ba598e7340761729801624e7a9330e Mon Sep 17 00:00:00 2001 From: Jeroen Massar Date: Wed, 13 May 2026 09:33:02 +0300 Subject: net/mlx5: Do not restore destination-less TC rules After IPsec policy/state TX rules are added, any TC flow rule, which forwards packets to uplink, is modified to forward to IPsec TX tables. As these tables are destroyed dynamically, whenever there is no reference to them, the destinations of this kind of rules must be restored to uplink, unless there is no destination for that rule. The flow rules FLOW_ACTION_ACCEPT, DROP, TRAP, GOTO and SAMPLE do not have a destination port, and thus out_count = 0. At cleanup time of the rules in mlx5_esw_ipsec_modify_flow_dests we call mlx5_eswitch_restore_ipsec_rule but as the above types do not have a destination we get an underflow of out_count, as the port is passed, which is esw_attr->out_count - 1. This change avoids calling mlx5_eswitch_restore_ipsec_rule when there are no output destinations and thus avoids the underflow. Fixes: d1569537a837 ("net/mlx5e: Modify and restore TC rules for IPSec TX rules") Signed-off-by: Jeroen Massar Reviewed-by: Jianbo Liu Reviewed-by: Cosmin Ratiu Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/20260513063302.333761-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c b/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c index 3cfe743610d3..ab50d2c734ed 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/esw/ipsec_fs.c @@ -142,7 +142,8 @@ static int mlx5_esw_ipsec_modify_flow_dests(struct mlx5_eswitch *esw, attr = flow->attr; esw_attr = attr->esw_attr; - if (esw_attr->out_count - esw_attr->split_count > 1) + if (!esw_attr->out_count || + esw_attr->out_count - esw_attr->split_count > 1) return 0; err = mlx5_eswitch_restore_ipsec_rule(esw, flow->rule[0], esw_attr, -- cgit v1.2.3 From c6df9a65cbb0fe7808a4b2872095f4c849b3196a Mon Sep 17 00:00:00 2001 From: Or Har-Toov Date: Wed, 13 May 2026 09:36:40 +0300 Subject: net/mlx5: Skip disabled vports when setting max TX speed When setting vports max TX speed during LAG activation or bond state changes, the code iterates over all eswitch vports. However, some vports may not be enabled yet. Skip vports that are not enabled to avoid sending FW commands for uninitialized vports. Save the LAG aggregated speed in the vport struct so it can be applied when the vport is enabled later. Fixes: 50f1d188c580 ("net/mlx5: Propagate LAG effective max_tx_speed to vports") Signed-off-by: Or Har-Toov Reviewed-by: Mark Bloch Signed-off-by: Tariq Toukan Link: https://patch.msgid.link/20260513063640.334132-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 21 +++++++++++++++++++++ drivers/net/ethernet/mellanox/mlx5/core/eswitch.h | 1 + drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c | 5 +++++ 3 files changed, 27 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 123c96716a54..7c8311f41232 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -908,6 +908,24 @@ static void esw_vport_cleanup(struct mlx5_eswitch *esw, struct mlx5_vport *vport esw_vport_cleanup_acl(esw, vport); } +static void mlx5_esw_vport_set_max_tx_speed(struct mlx5_eswitch *esw, + struct mlx5_vport *vport) +{ + int ret; + + if (!MLX5_CAP_ESW(esw->dev, esw_vport_state_max_tx_speed)) + return; + + ret = mlx5_modify_vport_max_tx_speed(esw->dev, + MLX5_VPORT_STATE_OP_MOD_ESW_VPORT, + vport->vport, true, + vport->agg_max_tx_speed); + if (ret) + mlx5_core_dbg(esw->dev, + "Failed to set vport %d speed %d, err=%d\n", + vport->vport, vport->agg_max_tx_speed, ret); +} + int mlx5_esw_vport_enable(struct mlx5_eswitch *esw, struct mlx5_vport *vport, enum mlx5_eswitch_vport_event enabled_events) { @@ -948,6 +966,9 @@ int mlx5_esw_vport_enable(struct mlx5_eswitch *esw, struct mlx5_vport *vport, esw->enabled_vports++; esw_debug(esw->dev, "Enabled VPORT(%d)\n", vport_num); + + if (vport->agg_max_tx_speed) + mlx5_esw_vport_set_max_tx_speed(esw, vport); done: mutex_unlock(&esw->state_lock); return ret; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h index 5128f5020dae..e9cf7c592ce9 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h @@ -247,6 +247,7 @@ struct mlx5_vport { enum mlx5_eswitch_vport_event enabled_events; int index; struct mlx5_devlink_port *dl_port; + u32 agg_max_tx_speed; }; struct mlx5_esw_indir_table; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c index 449e4bd86c06..f8e70ac5a85b 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c @@ -1274,6 +1274,11 @@ static void mlx5_lag_modify_device_vports_speed(struct mlx5_core_dev *mdev, if (vport->vport == MLX5_VPORT_UPLINK) continue; + vport->agg_max_tx_speed = speed; + + if (!vport->enabled) + continue; + ret = mlx5_modify_vport_max_tx_speed(mdev, op_mod, vport->vport, true, speed); if (ret) -- cgit v1.2.3 From 5db89c99566fc4728cc92e941d8e1975711e24b5 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Wed, 13 May 2026 21:37:39 -0400 Subject: net: ifb: report ethtool stats over num_tx_queues ifb_dev_init() allocates dp->tx_private to dev->num_tx_queues entries via kzalloc_objs(*txp, dev->num_tx_queues). Both IFB per-queue RX and TX stats live in those entries: ifb_xmit() updates txp->rx_stats using the skb queue mapping, ifb_ri_tasklet() updates txp->tx_stats, and ifb_stats64() aggregates both over dev->num_tx_queues. The ethtool stats callbacks instead size and walk the per-queue stats with dev->real_num_rx_queues and dev->real_num_tx_queues. With an asymmetric device where the RX queue count exceeds the TX queue count, for example: ip link add name ifb10 numtxqueues 1 numrxqueues 8 type ifb ethtool -S ifb10 ifb_get_ethtool_stats() indexes past the tx_private allocation and copies adjacent slab data through ETHTOOL_GSTATS. Use dev->num_tx_queues consistently for the stats strings, the stats count, and the stats data walks. This reports one RX stats group and one TX stats group for each backing ifb_q_private entry, which is the queue set IFB can actually populate. Reproduced under UML+KASAN at v7.1-rc2: BUG: KASAN: slab-out-of-bounds in ifb_fill_stats_data+0x3c/0xae Read of size 8 at addr 0000000062dbd228 by task ethtool/36 ifb_fill_stats_data+0x3c/0xae ifb_get_ethtool_stats+0xc0/0x129 __dev_ethtool+0x1ca5/0x363c dev_ethtool+0x123/0x1b3 dev_ioctl+0x56c/0x744 sock_do_ioctl+0x15f/0x1b2 sock_ioctl+0x4d5/0x50a sys_ioctl+0xd8b/0xde9 With the patch applied, the same UML+KASAN repro is silent and ethtool -S ifb10 reports only the stats backed by the single allocated tx_private entry. Fixes: a21ee5b2fcb8 ("net: ifb: support ethtools stats") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260514013739.3549624-1-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ifb.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c index 5407d2ed71b3..43aa1bfd41cf 100644 --- a/drivers/net/ifb.c +++ b/drivers/net/ifb.c @@ -211,12 +211,12 @@ static void ifb_get_strings(struct net_device *dev, u32 stringset, u8 *buf) switch (stringset) { case ETH_SS_STATS: - for (i = 0; i < dev->real_num_rx_queues; i++) + for (i = 0; i < dev->num_tx_queues; i++) for (j = 0; j < IFB_Q_STATS_LEN; j++) ethtool_sprintf(&p, "rx_queue_%u_%.18s", i, ifb_q_stats_desc[j].desc); - for (i = 0; i < dev->real_num_tx_queues; i++) + for (i = 0; i < dev->num_tx_queues; i++) for (j = 0; j < IFB_Q_STATS_LEN; j++) ethtool_sprintf(&p, "tx_queue_%u_%.18s", i, ifb_q_stats_desc[j].desc); @@ -229,8 +229,7 @@ static int ifb_get_sset_count(struct net_device *dev, int sset) { switch (sset) { case ETH_SS_STATS: - return IFB_Q_STATS_LEN * (dev->real_num_rx_queues + - dev->real_num_tx_queues); + return IFB_Q_STATS_LEN * dev->num_tx_queues * 2; default: return -EOPNOTSUPP; } @@ -262,12 +261,12 @@ static void ifb_get_ethtool_stats(struct net_device *dev, struct ifb_q_private *txp; int i; - for (i = 0; i < dev->real_num_rx_queues; i++) { + for (i = 0; i < dev->num_tx_queues; i++) { txp = dp->tx_private + i; ifb_fill_stats_data(&data, &txp->rx_stats); } - for (i = 0; i < dev->real_num_tx_queues; i++) { + for (i = 0; i < dev->num_tx_queues; i++) { txp = dp->tx_private + i; ifb_fill_stats_data(&data, &txp->tx_stats); } -- cgit v1.2.3 From 6ea68a8dc7d2711504d944811981a5304af7d7a9 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Mon, 11 May 2026 12:53:17 -0500 Subject: scsi: sd: Fix return code handling in sd_spinup_disk() As found by smatch-ci, scsi_execute_cmd() can return negative or positve values so we should use a int instead of unsigned int. Fixes: b4d0c33a32c3 ("scsi: sd: Fix sshdr use in sd_spinup_disk") Reported-by: Dan Carpenter Closes: https://lore.kernel.org/linux-scsi/agFbI7E6JQwd3wGW@stanley.mountain/T/#u Signed-off-by: Mike Christie Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20260511175317.114007-1-michael.christie@oracle.com Signed-off-by: Martin K. Petersen --- drivers/scsi/sd.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index adc3fa55ca2c..599e75f33334 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2476,8 +2476,7 @@ sd_spinup_disk(struct scsi_disk *sdkp) { static const u8 cmd[10] = { TEST_UNIT_READY }; unsigned long spintime_expire = 0; - int spintime, sense_valid = 0; - unsigned int the_result; + int the_result, spintime, sense_valid = 0; struct scsi_sense_hdr sshdr; struct scsi_failure failure_defs[] = { /* Do not retry Medium Not Present */ -- cgit v1.2.3 From b52a8d52c3125ec9a93106ed816582368de34426 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Sun, 19 Apr 2026 17:04:20 -0400 Subject: scsi: isci: Fix use-after-free in device removal path The ISCI completion tasklet is initialized in isci_host_alloc() (drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy interrupt handlers (drivers/scsi/isci/host.c:223,613). isci_host_deinit() stops the controller and waits for stop completion, but it never kills completion_tasklet before teardown continues. A top-of-function tasklet_kill() is not sufficient here: interrupts are only disabled when isci_host_stop_complete() runs, so until wait_for_stop() returns the IRQ handlers can still requeue the tasklet. The tasklet callback also re-enables interrupts after draining completions, so killing the tasklet before the source is quiesced leaves the same race open. Once wait_for_stop() returns, no further IRQ-driven scheduling can occur. Kill completion_tasklet there so teardown cannot race a queued tasklet running on a dead ihost. On remove or unload, the stale callback can otherwise dereference ihost and touch ihost->smu_registers after the host lifetime ends. A UML + KASAN analogue reproduced the failure class both with no tasklet_kill() and with tasklet_kill() placed before source quiesce, and stayed clean once the kill happened after quiescing the scheduling source. This mirrors commit f6ab594672d4 ("scsi: aic94xx: fix use-after-free in device removal path"), but ISCI needs the kill after wait_for_stop(). Fixes: 6f231dda6808 ("isci: Intel(R) C600 Series Chipset Storage Control Unit Driver") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260419210420.2134639-1-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen --- drivers/scsi/isci/host.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 6d2f4c831df7..ff199bab5d1a 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -1252,6 +1252,9 @@ void isci_host_deinit(struct isci_host *ihost) wait_for_stop(ihost); + /* No further IRQ-driven scheduling can happen past wait_for_stop(). */ + tasklet_kill(&ihost->completion_tasklet); + /* phy stop is after controller stop to allow port and device to * go idle before shutting down the phys, but the expectation is * that i/o has been shut off well before we reach this -- cgit v1.2.3 From b71cb088b2e3427924a470fc43e7aedb8a40d2e3 Mon Sep 17 00:00:00 2001 From: Guixin Liu Date: Fri, 24 Apr 2026 09:39:23 +0800 Subject: scsi: target: tcm_loop: Fix NULL ptr dereference The TCM_LOOP LUN creation process calls device_register() to create the device, which in turn invokes tcm_loop_driver_probe() registered with the TCM_LOOP bus to create and register the scsi_host. However, if the scsi_host memory allocation fails or scsi_add_host() fails, the device_register() process still returns success. Subsequently, when the user binds the LUN to a specific backend device, it accesses the NULL or freed scsi_host. Crash Call Trace: RIP: 0010:scsi_is_host_device+0x7/0x20 scsi_alloc_target+0x32/0x2c0 __scsi_add_device+0x41/0xf0 scsi_add_device+0xd/0x30 tcm_loop_port_link+0x25/0x50 [tcm_loop] target_fabric_port_link+0x9c/0xb0 [target_core_mod] ... This issue is fixed by: 1. Setting the tcm_loop_hba's scsi_host to NULL, if scsi_add_host() fails. 2. Checking the tcm_loop_hba's scsi_host after device_register(). 3. Checking the tcm_loop_hba's scsi_host in tcm_loop_driver_remove(). Fixes: 3703b2c5d041 ("[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module") Signed-off-by: Guixin Liu Reviewed-by: Mike Christie Link: https://patch.msgid.link/20260424013923.25998-1-kanie@linux.alibaba.com Signed-off-by: Martin K. Petersen --- drivers/target/loopback/tcm_loop.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index a25fd826b542..110297345751 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -393,6 +393,7 @@ static int tcm_loop_driver_probe(struct device *dev) if (error) { pr_err("%s: scsi_add_host failed\n", __func__); scsi_host_put(sh); + tl_hba->sh = NULL; return -ENODEV; } return 0; @@ -406,8 +407,10 @@ static void tcm_loop_driver_remove(struct device *dev) tl_hba = to_tcm_loop_hba(dev); sh = tl_hba->sh; - scsi_remove_host(sh); - scsi_host_put(sh); + if (sh) { + scsi_remove_host(sh); + scsi_host_put(sh); + } } static void tcm_loop_release_adapter(struct device *dev) @@ -436,6 +439,11 @@ static int tcm_loop_setup_hba_bus(struct tcm_loop_hba *tl_hba, int tcm_loop_host return -ENODEV; } + if (!tl_hba->sh) { + device_unregister(&tl_hba->dev); + return -ENODEV; + } + return 0; } -- cgit v1.2.3 From bc62216dc8e221e3781afa14430f45208bfa9af9 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Wed, 13 May 2026 09:01:36 +0200 Subject: batman-adv: frag: disallow unicast fragment in fragment batadv_frag_skb_buffer() is called by batadv_batman_skb_recv() when a BATADV_UNICAST_FRAG packet is received. Once all fragments are collected and the packet is reassembled, batadv_recv_frag_packet() calls batadv_batman_skb_recv() again to process the defragmented payload. A malicious sender can craft a BATADV_UNICAST_FRAG packet whose reassembled payload is itself a BATADV_UNICAST_FRAG packet (matryoshka-style nesting). Each nesting level recurses through batadv_batman_skb_recv() without bound, growing the kernel stack until it is exhausted. Since refragmentation or fragments in fragments are not actually allowed, discard all packets which are still BATADV_UNICAST_FRAG packets after the defragmentation process. Cc: stable@kernel.org Fixes: 610bfc6bc99b ("batman-adv: Receive fragmented packets and merge") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann --- net/batman-adv/fragmentation.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c index 1152c2ce0c1e..4a594aa2ebf6 100644 --- a/net/batman-adv/fragmentation.c +++ b/net/batman-adv/fragmentation.c @@ -304,6 +304,31 @@ free: return skb_out; } +/** + * batadv_skb_is_frag() - check if newly merged skb is gain a unicast packet + * @skb: newly merged skb + * + * Return: if newly skb is of type BATADV_UNICAST_FRAG + */ +static bool batadv_skb_is_frag(struct sk_buff *skb) +{ + struct batadv_ogm_packet *batadv_ogm_packet; + + /* packet should hold at least type and version */ + if (unlikely(!pskb_may_pull(skb, 2))) + return false; + + batadv_ogm_packet = (struct batadv_ogm_packet *)skb->data; + + if (batadv_ogm_packet->version != BATADV_COMPAT_VERSION) + return false; + + if (batadv_ogm_packet->packet_type != BATADV_UNICAST_FRAG) + return false; + + return true; +} + /** * batadv_frag_skb_buffer() - buffer fragment for later merge * @skb: skb to buffer @@ -337,6 +362,16 @@ bool batadv_frag_skb_buffer(struct sk_buff **skb, if (!skb_out) goto out_err; + /* fragment in fragment is not allowed. otherwise it is possible + * to exhaust the stack when receiving a matryoshka-style + * "fragments in a fragment packet" + */ + if (batadv_skb_is_frag(skb_out)) { + kfree_skb(skb_out); + skb_out = NULL; + goto out_err; + } + out: ret = true; out_err: -- cgit v1.2.3 From d5487249a81ea658717614009c8f46acc5b7101a Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Wed, 13 May 2026 10:43:54 +0200 Subject: batman-adv: tp_meter: directly shut down timer on cleanup batadv_tp_sender_cleanup() was calling timer_delete_sync() followed by timer_delete() to guard against the timer handler re-arming itself between the two calls. This double-deletion hack relied on the sending status being set to 0 to suppress re-arming. Replace both calls with a single timer_shutdown_sync(). This function both waits for any running timer callback to complete (like timer_delete_sync()) and permanently disarms the timer so it cannot be re-armed afterwards, making re-arming prevention unconditional and self-documenting. The re-arming property is also required because otherwise: 1. context 0 (batadv_tp_recv_ack()) checks in batadv_tp_reset_sender_timer() if sending is still 1 -> it is 2. context 1 changes in batadv_tp_sender_shutdown() sending to 0 and in this process forces the kthread to stop timer in batadv_tp_sender_cleanup() 3. context 0 continues in batadv_tp_reset_sender_timer() and rearms the timer -> but the reference for it is already gone Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann --- net/batman-adv/tp_meter.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/net/batman-adv/tp_meter.c b/net/batman-adv/tp_meter.c index a3593d104caa..1fd1526059d8 100644 --- a/net/batman-adv/tp_meter.c +++ b/net/batman-adv/tp_meter.c @@ -401,13 +401,7 @@ static void batadv_tp_sender_cleanup(struct batadv_tp_vars *tp_vars) batadv_tp_list_detach(tp_vars); /* kill the timer and remove its reference */ - timer_delete_sync(&tp_vars->timer); - /* the worker might have rearmed itself therefore we kill it again. Note - * that if the worker should run again before invoking the following - * timer_delete(), it would not re-arm itself once again because the status - * is OFF now - */ - timer_delete(&tp_vars->timer); + timer_shutdown_sync(&tp_vars->timer); batadv_tp_vars_put(tp_vars); } -- cgit v1.2.3 From 8a220d1c312c66194f4a33dd52d1fba42bc2b341 Mon Sep 17 00:00:00 2001 From: Hongling Zeng Date: Wed, 13 May 2026 18:34:06 +0800 Subject: cachefiles: Fix error return when vfs_mkdir() fails When vfs_mkdir() fails, the error code is not extracted from the returned error pointer. This causes mkdir_error to be reached with ret=0, which leads to returning ERR_PTR(0) (NULL) instead of a proper error pointer. Fix this by extracting the error code from the error pointer when vfs_mkdir() fails. Fixes: 406fad7698f5 ("cachefiles: Fix oops in vfs_mkdir from cachefiles_get_directory") Signed-off-by: Hongling Zeng Link: https://patch.msgid.link/20260513103406.202320-1-zenghongling@kylinos.cn Signed-off-by: Christian Brauner --- fs/cachefiles/namei.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index 1b83ed0e0a63..2937db690b40 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -130,6 +130,8 @@ retry: ret = cachefiles_inject_write_error(); if (ret == 0) { subdir = vfs_mkdir(&nop_mnt_idmap, d_inode(dir), subdir, 0700, NULL); + if (IS_ERR(subdir)) + ret = PTR_ERR(subdir); } else { end_creating(subdir); subdir = ERR_PTR(ret); -- cgit v1.2.3 From 3f9ed5f5aa9ecffd284218fffd6abc29617f51d5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig=20=28The=20Capable=20Hub=29?= Date: Tue, 28 Apr 2026 16:45:53 +0200 Subject: drm/msm: Don't use UTS_RELEASE directly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit UTS_RELEASE evaluates to a static string and changes quite easily (e.g. uncommitted changes in the source tree or new commits). So when checking if a patch introduces changes to the resulting binary each usage of UTS_RELEASE is source of annoyance. Instead of using UTS_RELEASE directly use init_utsname()->release which evaluates to the same string but with that a change of UTS_RELEASE doesn't affect msm_disp_snapshot_util.o or msm_gpu.o. Signed-off-by: Uwe Kleine-König (The Capable Hub) Patchwork: https://patchwork.freedesktop.org/patch/721948/ Message-ID: <20260428144553.1103785-2-u.kleine-koenig@baylibre.com> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c | 4 ++-- drivers/gpu/drm/msm/msm_gpu.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c b/drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c index 19b470968f4d..636bcb65a2a4 100644 --- a/drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c +++ b/drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c @@ -5,7 +5,7 @@ #define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__ -#include +#include #include "msm_disp_snapshot.h" @@ -79,7 +79,7 @@ void msm_disp_state_print(struct msm_disp_state *state, struct drm_printer *p) } drm_printf(p, "---\n"); - drm_printf(p, "kernel: " UTS_RELEASE "\n"); + drm_printf(p, "kernel: %s\n", init_utsname()->release); drm_printf(p, "module: " KBUILD_MODNAME "\n"); drm_printf(p, "dpu devcoredump\n"); drm_printf(p, "time: %ptSp\n", &state->time); diff --git a/drivers/gpu/drm/msm/msm_gpu.c b/drivers/gpu/drm/msm/msm_gpu.c index d901304fff6d..b0228ec42030 100644 --- a/drivers/gpu/drm/msm/msm_gpu.c +++ b/drivers/gpu/drm/msm/msm_gpu.c @@ -13,11 +13,11 @@ #include "msm_gpu_trace.h" //#include "adreno/adreno_gpu.h" -#include #include #include #include #include +#include /* * Power Management: @@ -196,7 +196,7 @@ static ssize_t msm_gpu_devcoredump_read(char *buffer, loff_t offset, p = drm_coredump_printer(&iter); drm_printf(&p, "---\n"); - drm_printf(&p, "kernel: " UTS_RELEASE "\n"); + drm_printf(&p, "kernel: %s\n", init_utsname()->release); drm_printf(&p, "module: " KBUILD_MODNAME "\n"); drm_printf(&p, "time: %ptSp\n", &state->time); if (state->comm) -- cgit v1.2.3 From 439e16c91aeeff2c7b503b317ccce2458a021191 Mon Sep 17 00:00:00 2001 From: Hans Zhang <18255117159@163.com> Date: Fri, 15 May 2026 23:36:35 +0800 Subject: MAINTAINERS: Remove Jianjun Wang as PCIe mediatek maintainer Email to Jianjun Wang bounces with error: "550 Relaying mail to jianjun.wang@mediatek.com is not allowed". Remove the address to avoid sending future kernel maintenance queries to an unreachable destination. The MediaTek PCIe driver remains supported by Ryder Lee. Signed-off-by: Hans Zhang <18255117159@163.com> Signed-off-by: Bjorn Helgaas Link: https://patch.msgid.link/20260515153635.136054-1-18255117159@163.com --- MAINTAINERS | 1 - 1 file changed, 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index ab2f91f62c54..025fcdb10a61 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -20700,7 +20700,6 @@ F: drivers/pci/controller/dwc/pcie-intel-gw.c PCIE DRIVER FOR MEDIATEK M: Ryder Lee -M: Jianjun Wang L: linux-pci@vger.kernel.org L: linux-mediatek@lists.infradead.org (moderated for non-subscribers) S: Supported -- cgit v1.2.3 From 3392291fc509d8ad6e4ad90f15b0a193f721cbc9 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Fri, 8 May 2026 14:57:21 +0800 Subject: drm/msm: Fix shrinker deadlock With PROVE_LOCKING on an Snapdragon X1 and VM reclaim pressure, we see: ====================================================== WARNING: possible circular locking dependency detected 7.0.0-debug+ #43 Tainted: G W ------------------------------------------------------ kswapd0/82 is trying to acquire lock: ffff800080ec3870 (reservation_ww_class_acquire){+.+.}-{0:0}, at: msm_gem_shrinker_scan+0x17c/0x400 [msm] but task is already holding lock: ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (fs_reclaim){+.+.}-{0:0}: __lock_acquire+0x4d0/0xad0 lock_acquire.part.0+0xc4/0x248 lock_acquire+0x8c/0x248 fs_reclaim_acquire+0xd0/0xf0 dma_resv_lockdep+0x224/0x348 do_one_initcall+0x84/0x5d0 do_initcalls+0x194/0x1d8 kernel_init_freeable+0x128/0x180 kernel_init+0x2c/0x160 ret_from_fork+0x10/0x20 -> #1 (reservation_ww_class_mutex){+.+.}-{4:4}: __lock_acquire+0x4d0/0xad0 lock_acquire.part.0+0xc4/0x248 lock_acquire+0x8c/0x248 dma_resv_lockdep+0x1a8/0x348 do_one_initcall+0x84/0x5d0 do_initcalls+0x194/0x1d8 kernel_init_freeable+0x128/0x180 kernel_init+0x2c/0x160 ret_from_fork+0x10/0x20 -> #0 (reservation_ww_class_acquire){+.+.}-{0:0}: check_prev_add+0x114/0x790 validate_chain+0x594/0x6f0 __lock_acquire+0x4d0/0xad0 lock_acquire.part.0+0xc4/0x248 lock_acquire+0x8c/0x248 drm_gem_lru_scan+0x1ac/0x440 msm_gem_shrinker_scan+0x17c/0x400 [msm] do_shrink_slab+0x150/0x4a0 shrink_slab+0x144/0x460 shrink_one+0x9c/0x1b0 shrink_many+0x27c/0x5c0 shrink_node+0x344/0x550 balance_pgdat+0x2c0/0x988 kswapd+0x11c/0x318 kthread+0x10c/0x128 ret_from_fork+0x10/0x20 other info that might help us debug this: Chain exists of: reservation_ww_class_acquire --> reservation_ww_class_mutex --> fs_reclaim Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(reservation_ww_class_mutex); lock(fs_reclaim); lock(reservation_ww_class_acquire); *** DEADLOCK *** 1 lock held by kswapd0/82: #0: ffffc31709b263b8 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x88/0x988 stack backtrace: CPU: 4 UID: 0 PID: 82 Comm: kswapd0 Tainted: G W 7.0.0-debug+ #43 PREEMPT(full) Tainted: [W]=WARN Hardware name: LENOVO 21BX0016US/21BX0016US, BIOS N3HET94W (1.66 ) 09/15/2025 Call trace: show_stack+0x20/0x40 (C) dump_stack_lvl+0x9c/0xd0 dump_stack+0x18/0x30 print_circular_bug+0x114/0x120 check_noncircular+0x178/0x198 check_prev_add+0x114/0x790 validate_chain+0x594/0x6f0 __lock_acquire+0x4d0/0xad0 lock_acquire.part.0+0xc4/0x248 lock_acquire+0x8c/0x248 drm_gem_lru_scan+0x1ac/0x440 msm_gem_shrinker_scan+0x17c/0x400 [msm] do_shrink_slab+0x150/0x4a0 shrink_slab+0x144/0x460 shrink_one+0x9c/0x1b0 shrink_many+0x27c/0x5c0 shrink_node+0x344/0x550 balance_pgdat+0x2c0/0x988 kswapd+0x11c/0x318 kthread+0x10c/0x128 ret_from_fork+0x10/0x20 kswapd0 holding fs_reclaim calls the MSM shrinker, which calls dma_resv_lock. This in turn acquires fs_reclaim. Fix this deadlock by using dma_resv_trylock() instead, dropping the subsequently unused passed wait-wound lock 'ticket'. Cc: stable@vger.kernel.org Signed-off-by: Daniel J Blueman Fixes: fe4952b5f27c ("drm/msm: Convert vm locking") Patchwork: https://patchwork.freedesktop.org/patch/723564/ Message-ID: <20260508065722.18785-1-daniel@quora.org> [rob: fixup compile errors, replace lockdep splat with something legible] Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/msm_gem_shrinker.c | 40 ++++++++++++++-------------------- 1 file changed, 16 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_gem_shrinker.c b/drivers/gpu/drm/msm/msm_gem_shrinker.c index 31fa51a44f86..6e39e4e578bb 100644 --- a/drivers/gpu/drm/msm/msm_gem_shrinker.c +++ b/drivers/gpu/drm/msm/msm_gem_shrinker.c @@ -43,8 +43,7 @@ msm_gem_shrinker_count(struct shrinker *shrinker, struct shrink_control *sc) } static bool -with_vm_locks(struct ww_acquire_ctx *ticket, - void (*fn)(struct drm_gem_object *obj), +with_vm_locks(void (*fn)(struct drm_gem_object *obj), struct drm_gem_object *obj) { /* @@ -52,7 +51,7 @@ with_vm_locks(struct ww_acquire_ctx *ticket, * success paths */ struct drm_gpuvm_bo *vm_bo, *last_locked = NULL; - int ret = 0; + bool locked = true; drm_gem_for_each_gpuvm_bo (vm_bo, obj) { struct dma_resv *resv = drm_gpuvm_resv(vm_bo->vm); @@ -60,23 +59,14 @@ with_vm_locks(struct ww_acquire_ctx *ticket, if (resv == obj->resv) continue; - ret = dma_resv_lock(resv, ticket); - - /* - * Since we already skip the case when the VM and obj - * share a resv (ie. _NO_SHARE objs), we don't expect - * to hit a double-locking scenario... which the lock - * unwinding cannot really cope with. - */ - WARN_ON(ret == -EALREADY); - /* - * Don't bother with slow-lock / backoff / retry sequence, - * if we can't get the lock just give up and move on to - * the next object. + * dma_resv_lock can't be used due to acquiring 'ticket' before the + * fs_reclaim lock, which is held in shrinker context */ - if (ret) + if (!dma_resv_trylock(resv)) { + locked = false; goto out_unlock; + } /* * Hold a ref to prevent the vm_bo from being freed @@ -108,11 +98,11 @@ out_unlock: } } - return ret == 0; + return locked; } static bool -purge(struct drm_gem_object *obj, struct ww_acquire_ctx *ticket) +purge(struct drm_gem_object *obj, struct ww_acquire_ctx *) { if (!is_purgeable(to_msm_bo(obj))) return false; @@ -120,11 +110,11 @@ purge(struct drm_gem_object *obj, struct ww_acquire_ctx *ticket) if (msm_gem_active(obj)) return false; - return with_vm_locks(ticket, msm_gem_purge, obj); + return with_vm_locks(msm_gem_purge, obj); } static bool -evict(struct drm_gem_object *obj, struct ww_acquire_ctx *ticket) +evict(struct drm_gem_object *obj, struct ww_acquire_ctx *) { if (is_unevictable(to_msm_bo(obj))) return false; @@ -132,7 +122,7 @@ evict(struct drm_gem_object *obj, struct ww_acquire_ctx *ticket) if (msm_gem_active(obj)) return false; - return with_vm_locks(ticket, msm_gem_evict, obj); + return with_vm_locks(msm_gem_evict, obj); } static bool @@ -164,7 +154,6 @@ static unsigned long msm_gem_shrinker_scan(struct shrinker *shrinker, struct shrink_control *sc) { struct msm_drm_private *priv = shrinker->private_data; - struct ww_acquire_ctx ticket; struct { struct drm_gem_lru *lru; bool (*shrink)(struct drm_gem_object *obj, struct ww_acquire_ctx *ticket); @@ -185,11 +174,14 @@ msm_gem_shrinker_scan(struct shrinker *shrinker, struct shrink_control *sc) for (unsigned i = 0; (nr > 0) && (i < ARRAY_SIZE(stages)); i++) { if (!stages[i].cond) continue; + /* + * 'ticket' not needed on trylock paths + */ stages[i].freed = drm_gem_lru_scan(stages[i].lru, nr, &stages[i].remaining, stages[i].shrink, - &ticket); + NULL); nr -= stages[i].freed; freed += stages[i].freed; remaining += stages[i].remaining; -- cgit v1.2.3 From a828abbb897657451d96ad7bf20f1893ac983bb9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 15 May 2026 13:32:32 +0200 Subject: bpf: make bpf_session_is_return() reference optional Building without CONFIG_BPF_EVENTS produces a build-time warning: WARN: resolve_btfids: unresolved symbol bpf_session_is_return The function is actually defined in kernel/trace/bpf_trace.o, which is built conditionally based on configuration. Make the reference to this function conditional as well, as is already done in the bpf verifier for other functions. Fixes: 8fe4dc4f6456 ("bpf: change prototype of bpf_session_{cookie,is_return}") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20260515113242.2706303-1-arnd@kernel.org Signed-off-by: Alexei Starovoitov --- kernel/bpf/verifier.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 69d75515ed3f..88b40c979b56 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -11263,7 +11263,11 @@ BTF_ID(func, bpf_task_work_schedule_resume) BTF_ID(func, bpf_arena_alloc_pages) BTF_ID(func, bpf_arena_free_pages) BTF_ID(func, bpf_arena_reserve_pages) +#ifdef CONFIG_BPF_EVENTS BTF_ID(func, bpf_session_is_return) +#else +BTF_ID_UNUSED +#endif BTF_ID(func, bpf_stream_vprintk) BTF_ID(func, bpf_stream_print_stack) -- cgit v1.2.3 From ccd25890f73c082fe2657ed227b497d6ac5fdc40 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 15 May 2026 10:19:09 -0600 Subject: io_uring/net: punt IORING_OP_BIND async if it needs file create For two reasons: 1) An opcode cannot block inside io_uring_enter() doing submissions, as it'll stall the submission side pipeline. 2) Ending up in sb_start_write() -> __sb_start_write() -> percpu_down_read_freezable() introduces a new lockdep edge, which it correctly complains about. Check if the socket type is AF_UNIX and has a non-empty pathname. If it does, mark it REQ_F_FORCE_ASYNC to punt the submission to io-wq rather than attempt to do it inline. Fixes: 7481fd93fa0a ("io_uring: Introduce IORING_OP_BIND") Reviewed-by: Gabriel Krisman Bertazi Signed-off-by: Jens Axboe --- io_uring/net.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/io_uring/net.c b/io_uring/net.c index 30cd22c0b934..8df15b639358 100644 --- a/io_uring/net.c +++ b/io_uring/net.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include #include @@ -1799,11 +1800,29 @@ out: return IOU_COMPLETE; } +/* + * Check if bind request would potentially end up with filename_create(), + * which in turn end up in mnt_want_write() which will grab the fs + * percpu start write sem. This can trigger a lockdep warning. + */ +static int io_bind_file_create(const struct io_async_msghdr *io, int addr_len) +{ + const struct sockaddr_un *sun; + + if (io->addr.ss_family != AF_UNIX) + return 0; + if (addr_len <= offsetof(struct sockaddr_un, sun_path)) + return 0; + sun = (const struct sockaddr_un *) &io->addr; + return sun->sun_path[0] != '\0'; +} + int io_bind_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) { struct io_bind *bind = io_kiocb_to_cmd(req, struct io_bind); struct sockaddr __user *uaddr; struct io_async_msghdr *io; + int ret; if (sqe->len || sqe->buf_index || sqe->rw_flags || sqe->splice_fd_in) return -EINVAL; @@ -1814,7 +1833,12 @@ int io_bind_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) io = io_msg_alloc_async(req); if (unlikely(!io)) return -ENOMEM; - return move_addr_to_kernel(uaddr, bind->addr_len, &io->addr); + ret = move_addr_to_kernel(uaddr, bind->addr_len, &io->addr); + if (unlikely(ret)) + return ret; + if (io_bind_file_create(io, bind->addr_len)) + req->flags |= REQ_F_FORCE_ASYNC; + return 0; } int io_bind(struct io_kiocb *req, unsigned int issue_flags) -- cgit v1.2.3 From ed831e7ea1a860bdbab3eadeb95f7f73e9d212df Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 6 May 2026 09:45:37 -0700 Subject: PCI: brcmstb: Assign pcie->gen from of_pci_get_max_link_speed() After commit 03f920936977 ("PCI: controller: Validate max-link-speed"), pcie->gen stopped being assigned and as a result the established PCIe link would stop supporting Gen3 speeds on 2712 since pcie->gen is used to populate LnkCntl2 and LnkCap in brcm_pcie_set_gen(). If the 'max-link-speed' property is not specified, or it exceeds Gen3, resort to the HW defaults. Link: https://github.com/raspberrypi/linux/issues/7343 Reported-by: Dom Cobley Reported-by: Phil Elwell Fixes: 03f920936977 ("PCI: controller: Validate max-link-speed") Signed-off-by: Florian Fainelli Signed-off-by: Bjorn Helgaas Reviewed-by: Hans Zhang <18255117159@163.com> Reviewed-by: Manivannan Sadhasivam Link: https://patch.msgid.link/20260506164537.103196-1-florian.fainelli@broadcom.com --- drivers/pci/controller/pcie-brcmstb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 714bcab97b60..08a0e7091ced 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -2072,8 +2072,10 @@ static int brcm_pcie_probe(struct platform_device *pdev) return PTR_ERR(pcie->clk); ret = of_pci_get_max_link_speed(np); - if (pcie_get_link_speed(ret) == PCI_SPEED_UNKNOWN) + if (ret < 0 || ret > 3) pcie->gen = 0; + else + pcie->gen = ret; pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc"); -- cgit v1.2.3 From 915fab69823a14c170dbaa3b41978768e0fe62fc Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Tue, 12 May 2026 16:51:14 -0400 Subject: ipv4: raw: reject IP_HDRINCL packets with ihl < 5 raw_send_hdrinc() validates that the caller-supplied IPv4 header fits within the message length: iphlen = iph->ihl * 4; err = -EINVAL; if (iphlen > length) goto error_free; if (iphlen >= sizeof(*iph)) { /* fix up saddr, tot_len, id, csum, transport_header */ } It does not, however, reject ihl < 5. For such a packet the "if (iphlen >= sizeof(*iph))" branch is skipped, leaving the crafted iphdr untouched, but the packet is still handed to __ip_local_out() and onward. Downstream consumers that read iph->ihl assume a sane value: net/ipv4/ah4.c:ah_output() in particular subtracts sizeof(struct iphdr) from top_iph->ihl * 4 and passes the (signed-int-negative, then cast to size_t) result to memcpy(), producing an OOB access of length close to SIZE_MAX and a host kernel panic. An IPv4 header with ihl < 5 is malformed by definition (RFC 791: "Internet Header Length is the length of the internet header in 32 bit words ... Note that the minimum value for a correct header is 5."). The kernel should not be willing to inject such a packet into its own output path. Reject "iphlen < sizeof(*iph)" alongside the existing "iphlen > length" check. This matches the principle that locally constructed packets that re-enter the IP stack must pass the same basic sanity tests that a foreign packet would be subjected to. Once this lands, the "if (iphlen >= sizeof(*iph))" wrapper around the fixup branch becomes redundant; left in place to keep the patch minimal and backport-friendly. A follow-up can unwrap it. Note that commit 86f4c90a1c5c ("ipv4, ipv6: ensure raw socket message is big enough to hold an IP header") ensures the message buffer is large enough to hold an iphdr, but does not constrain the self-reported iph->ihl. Reachability: the malformed packet source is any caller with CAP_NET_RAW, including an unprivileged process in a user+net namespace on a kernel with CONFIG_USER_NS=y. The reproduced AH crash also requires a matching xfrm AH policy on the outgoing route; a container granted CAP_NET_ADMIN can install that state and policy in its netns. Loopback bypasses xfrm_output, so the trigger uses a real netdev. Reproduced on UML + KASAN: kernel-mode fault at addr 0x0 with memcpy_orig at the crash site. Same shape reproduces inside a rootless Docker container with --cap-add NET_ADMIN on a stock distro kernel. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Suggested-by: Herbert Xu Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/77ec2b5e8111961c2c39883c92e8aa2709039c17.1778614451.git.michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv4/raw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 5aaf9c62c8e1..68e88cb3e55c 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -391,7 +391,7 @@ static int raw_send_hdrinc(struct sock *sk, struct flowi4 *fl4, * in, reject the frame as invalid */ err = -EINVAL; - if (iphlen > length) + if (iphlen > length || iphlen < sizeof(*iph)) goto error_free; if (iphlen >= sizeof(*iph)) { -- cgit v1.2.3 From cfd08f09723c5408eb3025b945fff08a99343911 Mon Sep 17 00:00:00 2001 From: Dragos Tatulea Date: Wed, 13 May 2026 15:45:18 +0300 Subject: IB/IPoIB: ndo_set_rx_mode_async conversion The commit in the fixes tag added a warning for devices that are netdev ops locked that they should be converted to .ndo_set_rx_mode_async. IPoIB for mlx5 is such a driver which was missed during the conversion because the flow is more complex: - mlx5 part of IPoIB device was converted to ops-lock in commit [1]. - ipoib_intf_init() then overrides netdev_ops with ipoib_netdev_ops_{pf,vf}, which still wired ndo_set_rx_mode to the legacy sync path -- tripping the new warning on every probe. So now we have the following splat: netdevice: ib0 (uninitialized): ops-locked drivers should use ndo_set_rx_mode_async WARNING: net/core/dev.c:11366 at register_netdevice+0x83c/0x21d0 ... register_netdev+0x1f/0x40 ipoib_add_one+0x35c/0x880 [ib_ipoib] This patch implements .ndo_set_rx_mode_async but it simply schedules the multicast restart task like before. This is done to maintain the assumption that this task and others [2] must run on the same order workqueue to avoid racing with themselves. The race between ipoib_mcast_join_task() and ipoib_mcast_restart_task() would be the most obvious example. [1] 8f7b00307bf1, "net/mlx5e: Convert mlx5 netdevs to instance locking") [2] ipoib_mcast_join_task, ipoib_mcast_restart_task, ipoib_mcast_carrier_on_task, ipoib_reap_ah, ipoib_reap_neigh Fixes: 3cbd22938877 ("net: warn ops-locked drivers still using ndo_set_rx_mode") Signed-off-by: Dragos Tatulea Reviewed-by: Cosmin Ratiu Acked-by: Jason Gunthorpe Link: https://patch.msgid.link/20260513124519.3357165-1-dtatulea@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 402671567736..3e1e1e861739 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1297,7 +1297,9 @@ static int ipoib_hard_header(struct sk_buff *skb, return IPOIB_HARD_LEN; } -static void ipoib_set_mcast_list(struct net_device *dev) +static void ipoib_set_rx_mode_async(struct net_device *dev, + struct netdev_hw_addr_list *uc, + struct netdev_hw_addr_list *mc) { struct ipoib_dev_priv *priv = ipoib_priv(dev); @@ -2160,7 +2162,7 @@ static const struct net_device_ops ipoib_netdev_ops_pf = { .ndo_fix_features = ipoib_fix_features, .ndo_start_xmit = ipoib_start_xmit, .ndo_tx_timeout = ipoib_timeout, - .ndo_set_rx_mode = ipoib_set_mcast_list, + .ndo_set_rx_mode_async = ipoib_set_rx_mode_async, .ndo_get_iflink = ipoib_get_iflink, .ndo_set_vf_link_state = ipoib_set_vf_link_state, .ndo_get_vf_config = ipoib_get_vf_config, @@ -2183,7 +2185,7 @@ static const struct net_device_ops ipoib_netdev_ops_vf = { .ndo_fix_features = ipoib_fix_features, .ndo_start_xmit = ipoib_start_xmit, .ndo_tx_timeout = ipoib_timeout, - .ndo_set_rx_mode = ipoib_set_mcast_list, + .ndo_set_rx_mode_async = ipoib_set_rx_mode_async, .ndo_get_iflink = ipoib_get_iflink, .ndo_get_stats64 = ipoib_get_stats, .ndo_eth_ioctl = ipoib_ioctl, -- cgit v1.2.3 From c0bf0a4f3f1f5f57aa83e1400ba4f56f0abfd542 Mon Sep 17 00:00:00 2001 From: Sam Daly Date: Wed, 13 May 2026 18:42:53 +0200 Subject: octeontx2-af: CGX: add bounds check to cgx_speed_mbps index MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit cgx_speed_mbps has 13 elements but RESP_LINKSTAT_SPEED can yield values 0-15. If it returns a value >= 13, this causes an out-of-bounds array access. Add a bounds check and default to speed 0 if the index is out of range. Fixes: 61071a871ea6 ("octeontx2-af: Forward CGX link notifications to PFs") Cc: Sunil Goutham Cc: Linu Cherian Cc: Geetha sowjanya Cc: hariprasad Cc: Subbaraya Sundeep Cc: Andrew Lunn Cc: stable Signed-off-by: Sam Daly Signed-off-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2026051352-refined-demise-e88d@gregkh Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c index 4f33a816bc7a..2e94d5105016 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c @@ -1294,13 +1294,18 @@ static inline void link_status_user_format(u64 lstat, struct cgx_link_user_info *linfo, struct cgx *cgx, u8 lmac_id) { + unsigned int speed; + linfo->link_up = FIELD_GET(RESP_LINKSTAT_UP, lstat); linfo->full_duplex = FIELD_GET(RESP_LINKSTAT_FDUPLEX, lstat); - linfo->speed = cgx_speed_mbps[FIELD_GET(RESP_LINKSTAT_SPEED, lstat)]; linfo->an = FIELD_GET(RESP_LINKSTAT_AN, lstat); linfo->fec = FIELD_GET(RESP_LINKSTAT_FEC, lstat); linfo->lmac_type_id = FIELD_GET(RESP_LINKSTAT_LMAC_TYPE, lstat); + speed = FIELD_GET(RESP_LINKSTAT_SPEED, lstat); + linfo->speed = speed < ARRAY_SIZE(cgx_speed_mbps) ? + cgx_speed_mbps[speed] : 0; + if (linfo->lmac_type_id >= LMAC_MODE_MAX) { dev_err(&cgx->pdev->dev, "Unknown lmac_type_id %d reported by firmware on cgx port%d:%d", linfo->lmac_type_id, cgx->cgx_id, lmac_id); -- cgit v1.2.3 From ae38d9179190a956e2a87a69ef1dd6f451b51c4d Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Thu, 14 May 2026 11:29:48 +0200 Subject: vsock/virtio: fix zerocopy completion for multi-skb sends When a large message is fragmented into multiple skbs, the zerocopy uarg is only allocated and attached to the last skb in the loop. Non-final skbs carry pinned user pages with no completion tracking, so the kernel has no way to notify userspace when those pages are safe to reuse. If the loop breaks early the uarg is never allocated at all, leaking pinned pages with no completion notification. Fix this by following the approach used by TCP: allocate the zerocopy uarg (if not provided by the caller) before the send loop and attach it to every skb via skb_zcopy_set(), which takes a reference per skb. Each skb's completion properly decrements the refcount, and the notification only fires after the last skb is freed. On failure, if no data was sent, the uarg is cleanly aborted via net_zcopy_put_abort(). This issue was initially discovered by sashiko while reviewing commit 1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting") but was pre-existing. Fixes: 581512a6dc93 ("vsock/virtio: MSG_ZEROCOPY flag support") Closes: https://sashiko.dev/#/patchset/20260420132051.217589-1-sgarzare%40redhat.com Reported-by: Maher Azzouzi Signed-off-by: Stefano Garzarella Acked-by: Michael S. Tsirkin Acked-by: Arseniy Krasnov Link: https://patch.msgid.link/20260514092948.268720-1-sgarzare@redhat.com Signed-off-by: Jakub Kicinski --- net/vmw_vsock/virtio_transport_common.c | 83 ++++++++++++++------------------- 1 file changed, 34 insertions(+), 49 deletions(-) diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c index 989cc252d3d3..1e3409d28164 100644 --- a/net/vmw_vsock/virtio_transport_common.c +++ b/net/vmw_vsock/virtio_transport_common.c @@ -70,34 +70,6 @@ static bool virtio_transport_can_zcopy(const struct virtio_transport *t_ops, return true; } -static int virtio_transport_init_zcopy_skb(struct vsock_sock *vsk, - struct sk_buff *skb, - struct msghdr *msg, - size_t pkt_len, - bool zerocopy) -{ - struct ubuf_info *uarg; - - if (msg->msg_ubuf) { - uarg = msg->msg_ubuf; - net_zcopy_get(uarg); - } else { - struct ubuf_info_msgzc *uarg_zc; - - uarg = msg_zerocopy_realloc(sk_vsock(vsk), - pkt_len, NULL, false); - if (!uarg) - return -1; - - uarg_zc = uarg_to_msgzc(uarg); - uarg_zc->zerocopy = zerocopy ? 1 : 0; - } - - skb_zcopy_init(skb, uarg); - - return 0; -} - static int virtio_transport_fill_skb(struct sk_buff *skb, struct virtio_vsock_pkt_info *info, size_t len, @@ -317,8 +289,10 @@ static int virtio_transport_send_pkt_info(struct vsock_sock *vsk, u32 src_cid, src_port, dst_cid, dst_port; const struct virtio_transport *t_ops; struct virtio_vsock_sock *vvs; + struct ubuf_info *uarg = NULL; u32 pkt_len = info->pkt_len; bool can_zcopy = false; + bool have_uref = false; u32 rest_len; int ret; @@ -360,6 +334,25 @@ static int virtio_transport_send_pkt_info(struct vsock_sock *vsk, if (can_zcopy) max_skb_len = min_t(u32, VIRTIO_VSOCK_MAX_PKT_BUF_SIZE, (MAX_SKB_FRAGS * PAGE_SIZE)); + + if (info->msg->msg_flags & MSG_ZEROCOPY && + info->op == VIRTIO_VSOCK_OP_RW) { + uarg = info->msg->msg_ubuf; + + if (!uarg) { + uarg = msg_zerocopy_realloc(sk_vsock(vsk), + pkt_len, NULL, false); + if (!uarg) { + virtio_transport_put_credit(vvs, pkt_len); + return -ENOMEM; + } + + if (!can_zcopy) + uarg_to_msgzc(uarg)->zerocopy = 0; + + have_uref = true; + } + } } rest_len = pkt_len; @@ -378,27 +371,7 @@ static int virtio_transport_send_pkt_info(struct vsock_sock *vsk, break; } - /* We process buffer part by part, allocating skb on - * each iteration. If this is last skb for this buffer - * and MSG_ZEROCOPY mode is in use - we must allocate - * completion for the current syscall. - * - * Pass pkt_len because msg iter is already consumed - * by virtio_transport_fill_skb(), so iter->count - * can not be used for RLIMIT_MEMLOCK pinned-pages - * accounting done by msg_zerocopy_realloc(). - */ - if (info->msg && info->msg->msg_flags & MSG_ZEROCOPY && - skb_len == rest_len && info->op == VIRTIO_VSOCK_OP_RW) { - if (virtio_transport_init_zcopy_skb(vsk, skb, - info->msg, - pkt_len, - can_zcopy)) { - kfree_skb(skb); - ret = -ENOMEM; - break; - } - } + skb_zcopy_set(skb, uarg, NULL); virtio_transport_inc_tx_pkt(vvs, skb); @@ -422,6 +395,18 @@ static int virtio_transport_send_pkt_info(struct vsock_sock *vsk, virtio_transport_put_credit(vvs, rest_len); + /* msg_zerocopy_realloc() initializes the ubuf_info refcnt to 1. + * skb_zcopy_set() increases it for each skb, so we can drop that + * initial reference to keep it balanced. + */ + if (have_uref) { + if (rest_len == pkt_len) + /* No data sent, abort the notification. */ + net_zcopy_put_abort(uarg, true); + else + net_zcopy_put(uarg); + } + /* Return number of bytes, if any data has been sent. */ if (rest_len != pkt_len) ret = pkt_len - rest_len; -- cgit v1.2.3 From 080ecbd05432970a8df1f70586b925a18b5ea6f4 Mon Sep 17 00:00:00 2001 From: Robbie Ko Date: Fri, 8 May 2026 21:42:11 +0800 Subject: btrfs: mark file extent range dirty after converting prealloc extents When writing into a preallocated extent, ordered extent completion calls btrfs_mark_extent_written() to convert the file extent item from the BTRFS_FILE_EXTENT_PREALLOC type to the BTRFS_FILE_EXTENT_REG type. If the preallocated extent was created beyond i_size with fallocate keep-size, and the inode is evicted and loaded again before the write, the inode's file_extent_tree is initialized only up to i_size. The beyond i_size prealloc extent is therefore not tracked there. After a write into that extent extends i_size, btrfs_mark_extent_written() updates the file extent item, but the corresponding range is not marked dirty in the inode's file_extent_tree. This can leave disk_i_size stale when the filesystem does not use the no-holes feature, so after remount the file size can go back to the old value. The following reproducer triggers the problem: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f -O ^no-holes $DEV mount $DEV $MNT touch $MNT/file fallocate -n -l 2M $MNT/file umount $MNT mount $DEV $MNT dd if=/dev/zero of=$MNT/file bs=1M count=1 conv=notrunc ls -lh $MNT/file umount $MNT mount $DEV $MNT ls -lh $MNT/file umount $MNT Running the reproducer gives the following result: $ ./test.sh (...) 1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.000596024 s, 1.8 GB/s -rw-rw-r-- 1 root root 1.0M May 8 16:34 /mnt/sdi/file -rw-rw-r-- 1 root root 0 May 8 16:34 /mnt/sdi/file Fix this by marking the written range dirty in the inode's file_extent_tree after successfully converting the prealloc extent to a regular extent. Fixes: 9ddc959e802b ("btrfs: use the file extent tree infrastructure") Reviewed-by: Filipe Manana Signed-off-by: Robbie Ko [ Minor change log updates ] Signed-off-by: Filipe Manana Signed-off-by: David Sterba --- fs/btrfs/file.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index cf1cb5c4db75..8c171ed07008 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -633,7 +633,7 @@ again: trans->transid); btrfs_set_file_extent_num_bytes(leaf, fi, end - other_start); - return 0; + goto mark_dirty; } } @@ -661,7 +661,7 @@ again: other_end - start); btrfs_set_file_extent_offset(leaf, fi, start - orig_offset); - return 0; + goto mark_dirty; } } @@ -788,7 +788,12 @@ again: } } - return 0; +mark_dirty: + ret = btrfs_inode_set_file_extent_range(inode, start, end - start); + if (ret) + btrfs_abort_transaction(trans, ret); + + return ret; } /* -- cgit v1.2.3 From 975e63c7a8074d83e195577b7f76dadc9a3d14b7 Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Fri, 8 May 2026 13:11:26 -0700 Subject: btrfs: always drop root->inodes lock before cond_resched() find_first_inode() and find_first_inode_to_shrink() lock root->inodes, then loop over them, occasionally skipping some inodes. When they skip an inode, they attempt to share the cpu/lock with cond_resched_lock(). However, that has a subtle problem associated with it. cond_resched_lock() only drops the lock if it needs to actually call schedule(). With CONFIG_PREEMPT_NONE, this means the full timeslice as detected at ticks. With 8+ cpus and default tunables, this is 2.8ms. So regardless of HZ, we will run for at least 2.8ms in this loop without dropping the lock, assuming it finds no suitable inodes. If HZ is small enough, it might be even worse as the tick granularity becomes bigger than the timeslice. The knock-on effect of this is that callers to btrfs_del_inode_from_root() like kswapd trying to shrink the inode slab or userspace threads calling evict() will spin on xa_lock(&root->inodes) for 2.8ms, so the extent map shrinker dominates the lock even though ostensibly it is intending to share it. This produces memory pressure as there is only one kswapd and it runs sequentially so it can get stuck in the inode slab shrinking. To fix it, simply replace cond_resched_lock() with an open coded variant which unconditionally does unlock/lock around cond_resched. Sharing the lock is decoupled from sharing the CPU, and all the users of the lock now share it fairly. I was able to reproduce this on test systems by producing a lot of empty files (to make a big root->inodes xarray), then producing memory pressure by reading large files larger than ram, triggering kswapd and the extent_map shrinker. The lock contention is visible with perf or lockstat. This patch also relieved a user-apparent bottleneck on a production system from the original report. Tested-by: Rik van Riel Reviewed-by: Filipe Manana Signed-off-by: Boris Burkov Signed-off-by: David Sterba --- fs/btrfs/extent_map.c | 4 +++- fs/btrfs/inode.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index 095a561d733f..fa9d183f4f86 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -1246,7 +1246,9 @@ static struct btrfs_inode *find_first_inode_to_shrink(struct btrfs_root *root, write_unlock(&tree->lock); next: from = btrfs_ino(inode) + 1; - cond_resched_lock(&root->inodes.xa_lock); + xa_unlock(&root->inodes); + cond_resched(); + xa_lock(&root->inodes); } xa_unlock(&root->inodes); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 75136a172710..1ca1cbdf25bc 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -10699,7 +10699,9 @@ struct btrfs_inode *btrfs_find_first_inode(struct btrfs_root *root, u64 min_ino) break; from = btrfs_ino(inode) + 1; - cond_resched_lock(&root->inodes.xa_lock); + xa_unlock(&root->inodes); + cond_resched(); + xa_lock(&root->inodes); } xa_unlock(&root->inodes); -- cgit v1.2.3 From 1e92637722ae4bd417f7a37e8d1485dc23b93935 Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Mon, 11 May 2026 13:07:11 -0700 Subject: btrfs: check for subvolume before deleting squota qgroup The invariant that we want to maintain with subvolume qgroups is that the qgroup can only be deleted if there is no root. With squotas, we thought that it was sufficient to just check the usage, because we assumed that deleting a subvolume will drive it's qgroups usage to 0, and thus 0 usage implies no subvolume. However, this is false, for two reasons: - A subvol whose extents are all from before squotas was enabled. - A subvol that was created in this transaction and for which we have not yet run any delayed refs. In both cases, deleting the qgroup breaks the desired invariant and we are left with a subvolume with no qgroup but squotas are enabled. Fix this by unifying the deletion check logic between full qgroups and squotas. Squotas do all the same checks *and* the additional usage == 0 check, which is the one extra rule peculiar to squotas. Link: https://lore.kernel.org/linux-btrfs/adnBhWfJQ1n3hZC8@merlins.org/ Fixes: a8df35619948 ("btrfs: forbid deleting live subvol qgroup") Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 50 +++++++++++++++++++++++++------------------------- 1 file changed, 25 insertions(+), 25 deletions(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index cdf736d3a4e5..86c036a089f6 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1715,32 +1715,24 @@ out: return ret; } -static bool can_delete_parent_qgroup(struct btrfs_qgroup *qgroup) - +static bool can_delete_parent_qgroup(struct btrfs_fs_info *fs_info, struct btrfs_qgroup *qgroup) { ASSERT(btrfs_qgroup_level(qgroup->qgroupid)); + if (btrfs_qgroup_mode(fs_info) == BTRFS_QGROUP_MODE_SIMPLE) + squota_check_parent_usage(fs_info, qgroup); return list_empty(&qgroup->members); } /* - * Return true if we can delete the squota qgroup and false otherwise. - * - * Rules for whether we can delete: - * - * A subvolume qgroup can be removed iff the subvolume is fully deleted, which - * is iff there is 0 usage in the qgroup. - * - * A higher level qgroup can be removed iff it has no members. - * Note: We audit its usage to warn on inconsitencies without blocking deletion. + * Because a shared extent can outlive its owning subvolume, we cannot delete a + * subvol squota qgroup until all of the extents it owns are gone, even if the + * subvolume itself has been deleted. */ -static bool can_delete_squota_qgroup(struct btrfs_fs_info *fs_info, struct btrfs_qgroup *qgroup) +static bool can_delete_squota_subvol_qgroup(struct btrfs_fs_info *fs_info, + struct btrfs_qgroup *qgroup) { ASSERT(btrfs_qgroup_mode(fs_info) == BTRFS_QGROUP_MODE_SIMPLE); - - if (btrfs_qgroup_level(qgroup->qgroupid) > 0) { - squota_check_parent_usage(fs_info, qgroup); - return can_delete_parent_qgroup(qgroup); - } + ASSERT(btrfs_qgroup_level(qgroup->qgroupid) == 0); return !(qgroup->rfer || qgroup->excl || qgroup->rfer_cmpr || qgroup->excl_cmpr); } @@ -1754,14 +1746,11 @@ static int can_delete_qgroup(struct btrfs_fs_info *fs_info, struct btrfs_qgroup { struct btrfs_key key; BTRFS_PATH_AUTO_FREE(path); - - /* Since squotas cannot be inconsistent, they have special rules for deletion. */ - if (btrfs_qgroup_mode(fs_info) == BTRFS_QGROUP_MODE_SIMPLE) - return can_delete_squota_qgroup(fs_info, qgroup); + int ret; /* For higher level qgroup, we can only delete it if it has no child. */ if (btrfs_qgroup_level(qgroup->qgroupid)) - return can_delete_parent_qgroup(qgroup); + return can_delete_parent_qgroup(fs_info, qgroup); /* * For level-0 qgroups, we can only delete it if it has no subvolume @@ -1777,10 +1766,21 @@ static int can_delete_qgroup(struct btrfs_fs_info *fs_info, struct btrfs_qgroup return -ENOMEM; /* - * The @ret from btrfs_find_root() exactly matches our definition for - * the return value, thus can be returned directly. + * Any subvol qgroup, regardless of mode, cannot be deleted if the + * subvol still exists. + */ + ret = btrfs_find_root(fs_info->tree_root, &key, path, NULL, NULL); + /* + * btrfs_find_root returns <0 on error, 0 if found, and >0 if not, + * so the "found" and "error" cases match our desired return values. */ - return btrfs_find_root(fs_info->tree_root, &key, path, NULL, NULL); + if (ret <= 0) + return ret; + + /* Squotas require additional checks, even if the subvol is deleted. */ + if (btrfs_qgroup_mode(fs_info) == BTRFS_QGROUP_MODE_SIMPLE) + return can_delete_squota_subvol_qgroup(fs_info, qgroup); + return 1; } int btrfs_remove_qgroup(struct btrfs_trans_handle *trans, u64 qgroupid) -- cgit v1.2.3 From d7c600554816b8ef70adffe078a0e360c055d82b Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Mon, 11 May 2026 19:53:46 -0700 Subject: btrfs: fix squota accounting during enable generation The first transaction that enables squotas is special and a bit tricky. We have to set BTRFS_FS_QUOTA_ENABLED after the transaction to avoid a deadlock, so any delayed refs that run before we set the bit are not squota accounted. For data this is fine, we don't get an owner_ref, so there is no real harm, it's as if the extent predated squotas. However for metadata, the tree block will have gen == enable_gen so when we free it later, we will decrement the squota accounting, which can result in an underflow. Before it is freed, btrfs check shows errors, as we have mismatched usage between the node generations/owners and the squota values. There are two angles to this fix: 1. For extents that come in delayed_refs that run during the enable_gen transaction, we must actually set enable_gen to the *next* transaction. That is the first transaction that we can really properly account in any way. 2. For extents that come in between the end of our transaction handle and the time we set the BTRFS_FS_QUOTA_ENABLED bit, we need an additional bit, BTRFS_FS_SQUOTA_ENABLING which only affects recording squota deltas, so we do pick up those extents. Otherwise, we would miss them, even for enable_gen + 1. Fixes: bd7c1ea3a302 ("btrfs: qgroup: check generation when recording simple quota delta") Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/fs.h | 1 + fs/btrfs/qgroup.c | 31 +++++++++++++++++++++++++++---- 2 files changed, 28 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/fs.h b/fs/btrfs/fs.h index a4758d94b32e..a8aa086a4df8 100644 --- a/fs/btrfs/fs.h +++ b/fs/btrfs/fs.h @@ -155,6 +155,7 @@ enum { BTRFS_FS_LOG_RECOVERING, BTRFS_FS_OPEN, BTRFS_FS_QUOTA_ENABLED, + BTRFS_FS_SQUOTA_ENABLING, BTRFS_FS_UPDATE_UUID_TREE_GEN, BTRFS_FS_CREATING_FREE_SPACE_TREE, BTRFS_FS_BTREE_ERR, diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 86c036a089f6..5f33727a7972 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1107,7 +1107,13 @@ int btrfs_quota_enable(struct btrfs_fs_info *fs_info, if (simple) { fs_info->qgroup_flags |= BTRFS_QGROUP_STATUS_FLAG_SIMPLE_MODE; btrfs_set_fs_incompat(fs_info, SIMPLE_QUOTA); - btrfs_set_qgroup_status_enable_gen(leaf, ptr, trans->transid); + /* + * Set the enable generation to the next transaction, as we cannot + * ensure that extents written during this transaction will see any + * state we have set here. So we should treat all extents of the + * transaction as coming in before squotas was enabled. + */ + btrfs_set_qgroup_status_enable_gen(leaf, ptr, trans->transid + 1); } else { fs_info->qgroup_flags |= BTRFS_QGROUP_STATUS_FLAG_INCONSISTENT; } @@ -1210,7 +1216,15 @@ out_add_root: goto out_free_path; } - fs_info->qgroup_enable_gen = trans->transid; + /* + * Set fs_info->qgroup_enable_gen and BTRFS_FS_SQUOTA_ENABLING + * under the transaction handle. We want to ensure that all extents in + * the next transaction definitely see them. + */ + if (simple) { + fs_info->qgroup_enable_gen = trans->transid + 1; + set_bit(BTRFS_FS_SQUOTA_ENABLING, &fs_info->flags); + } mutex_unlock(&fs_info->qgroup_ioctl_lock); /* @@ -1224,9 +1238,15 @@ out_add_root: */ ret = btrfs_commit_transaction(trans); trans = NULL; + mutex_lock(&fs_info->qgroup_ioctl_lock); - if (ret) + if (ret) { + if (simple) { + clear_bit(BTRFS_FS_SQUOTA_ENABLING, &fs_info->flags); + fs_info->qgroup_enable_gen = 0; + } goto out_free_path; + } /* * Set quota enabled flag after committing the transaction, to avoid @@ -1236,6 +1256,8 @@ out_add_root: spin_lock(&fs_info->qgroup_lock); fs_info->quota_root = quota_root; set_bit(BTRFS_FS_QUOTA_ENABLED, &fs_info->flags); + if (simple) + clear_bit(BTRFS_FS_SQUOTA_ENABLING, &fs_info->flags); spin_unlock(&fs_info->qgroup_lock); /* Skip rescan for simple qgroups. */ @@ -4922,7 +4944,8 @@ int btrfs_record_squota_delta(struct btrfs_fs_info *fs_info, u64 num_bytes = delta->num_bytes; const int sign = (delta->is_inc ? 1 : -1); - if (btrfs_qgroup_mode(fs_info) != BTRFS_QGROUP_MODE_SIMPLE) + if (btrfs_qgroup_mode(fs_info) != BTRFS_QGROUP_MODE_SIMPLE && + !test_bit(BTRFS_FS_SQUOTA_ENABLING, &fs_info->flags)) return 0; if (!btrfs_is_fstree(root)) -- cgit v1.2.3 From 99aacd195141ff77295c535388888f072ec89e82 Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Mon, 11 May 2026 13:06:24 -0700 Subject: btrfs: clamp to avoid squota underflow Simple quota accounting can undercount metadata tree block allocations in certain scenarios. When an undercounted subvolume is deleted and its tree blocks freed, the free deltas decrement rfer/excl past zero, wrapping the u64 to a value near U64_MAX. Once wrapped, can_delete_squota_qgroup() sees non-zero rfer and refuses to delete the qgroup. The qgroup becomes permanently orphaned in the quota tree, since there is no subvolume left to generate frees that would bring the counter back to zero. While we ultimately want to fix any mis-accounting at the source, it is also helpful and worthwhile to mitigate the damage by clamping rfer and excl to zero on underflow rather than allowing the u64 to wrap. This at least allows us to clean up the messed up qgroups on subvol deletion. Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 5f33727a7972..e9e7091e1452 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -4967,8 +4967,19 @@ int btrfs_record_squota_delta(struct btrfs_fs_info *fs_info, list_for_each_entry(qg, &qgroup_list, iterator) { struct btrfs_qgroup_list *glist; - qg->excl += num_bytes * sign; - qg->rfer += num_bytes * sign; + ASSERT(qg->excl == qg->rfer); + if (WARN_ON_ONCE(sign < 0 && qg->excl < num_bytes)) { + btrfs_warn(fs_info, + "squota underflow qg %hu/%llu excl %llu num_bytes %llu", + btrfs_qgroup_level(qg->qgroupid), + btrfs_qgroup_subvolid(qg->qgroupid), + qg->excl, num_bytes); + qg->excl = 0; + qg->rfer = 0; + } else { + qg->excl += num_bytes * sign; + qg->rfer += num_bytes * sign; + } qgroup_dirty(fs_info, qg); list_for_each_entry(glist, &qg->groups, next_group) -- cgit v1.2.3 From f13342e15deafb7538a7a8577ed5f4c33c56f64e Mon Sep 17 00:00:00 2001 From: Boris Burkov Date: Tue, 12 May 2026 09:55:28 -0700 Subject: btrfs: swallow btrfs_record_squota_delta() ENOENT I thought that it was likely I could harden squota deletion to the point that it was impossible to end up with an extent accounted to a qgroup outliving its qgroup. Several recent bugs have made me re-consider that position. Ultimately, this is a tradeoff between short term stability and long term strictness, but I think given that there could be another layer of bugs behind the 2-3 I just fixed, I would feel much more confident in people using squotas if the risk was "your values can get a bit out of whack which you can fix by deleting stuff or disabling/re-enabling/repairing" vs "it will abort your filesystem". As the final nail in the coffin, the Meta production kernel was lacking earlier fixes from me and Qu regarding subvol qgroup lifetime, so this is what we have been testing at scale, so I think at least for now upstream should have the same extra layer of protection. Reviewed-by: Qu Wenruo Signed-off-by: Boris Burkov Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/qgroup.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index e9e7091e1452..6838faceb6d5 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -4957,8 +4957,9 @@ int btrfs_record_squota_delta(struct btrfs_fs_info *fs_info, spin_lock(&fs_info->qgroup_lock); qgroup = find_qgroup_rb(fs_info, root); - if (!qgroup) { - ret = -ENOENT; + if (WARN_ON_ONCE(!qgroup)) { + btrfs_warn(fs_info, "squota failed to find qgroup for root %llu", root); + ret = 0; goto out; } -- cgit v1.2.3 From aaec7096f9961eb223b5b149abe9495525c205d9 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Wed, 13 May 2026 19:38:38 -0400 Subject: net: hsr: defer node table free until after RCU readers HSR node-list and node-status generic-netlink operations run under rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table with plain list_del() and frees each node immediately. That lets a generic-netlink reader hold a struct hsr_node pointer across hsr_dellink(). In a KASAN build, widening the reader window after hsr_get_next_node() obtains the node reproduces a slab-use-after-free when the reader copies node->macaddress_A; the freeing stack is hsr_del_nodes() from hsr_dellink(). Use list_del_rcu() and defer the free through the existing hsr_free_node_rcu() callback. This matches the lifetime rule used by the HSR prune paths, which already delete nodes with list_del_rcu() and call_rcu(). Fixes: b9a1e627405d ("hsr: implement dellink to clean up resources") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260513233838.3064715-2-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski --- net/hsr/hsr_framereg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c index 124619920d38..b514e43766ef 100644 --- a/net/hsr/hsr_framereg.c +++ b/net/hsr/hsr_framereg.c @@ -163,8 +163,8 @@ void hsr_del_nodes(struct list_head *node_db) struct hsr_node *tmp; list_for_each_entry_safe(node, tmp, node_db, mac_list) { - list_del(&node->mac_list); - hsr_free_node(node); + list_del_rcu(&node->mac_list); + call_rcu(&node->rcu_head, hsr_free_node_rcu); } } -- cgit v1.2.3 From 496ba79b9496b8b3747cbc764ebd33ee7325e806 Mon Sep 17 00:00:00 2001 From: Felix Gu Date: Sun, 10 May 2026 01:55:37 +0800 Subject: spi: mtk-snfi: Fix resource leak in mtk_snand_read_page_cache() When DMA read times out in mtk_snand_read_page_cache(), the original code erroneously jumped to cleanup label which skips DMA unmapping and ECC disable, causing a resource leak. Fixes: 764f1b748164 ("spi: add driver for MTK SPI NAND Flash Interface") Signed-off-by: Felix Gu Link: https://patch.msgid.link/20260510-snfi-v1-1-bc375cf1af8e@gmail.com Signed-off-by: Mark Brown --- drivers/spi/spi-mtk-snfi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-mtk-snfi.c b/drivers/spi/spi-mtk-snfi.c index e616e6800e92..6e96e50fedad 100644 --- a/drivers/spi/spi-mtk-snfi.c +++ b/drivers/spi/spi-mtk-snfi.c @@ -961,7 +961,7 @@ static int mtk_snand_read_page_cache(struct mtk_snand *snf, &snf->op_done, usecs_to_jiffies(SNFI_POLL_INTERVAL))) { dev_err(snf->dev, "DMA timed out for reading from cache.\n"); ret = -ETIMEDOUT; - goto cleanup; + goto cleanup2; } // Wait for BUS_SEC_CNTR returning expected value -- cgit v1.2.3 From 1afc25ae75288b3ce59e9e5a4b448bd354c9e565 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sat, 9 May 2026 10:27:06 +0200 Subject: netfilter: nf_conntrack_helper: fix possible null deref during error log Reported by sashiko: there is a small race window. If a helper module is unloaded or a userspace-defined helper is removed, nf_conntrack_helper_unregister() sets ->helper to NULL. Handle this safely. This needs a second patch to close related race during nf_conntrack_helper_unregister(). Fixes: b20ab9cc63ca ("netfilter: nf_ct_helper: better logging for dropped packets") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_helper.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index b594cd244fe1..17e971bd4c74 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -321,8 +321,8 @@ __printf(3, 4) void nf_ct_helper_log(struct sk_buff *skb, const struct nf_conn *ct, const char *fmt, ...) { + const char *helper_name = "(null)"; const struct nf_conn_help *help; - const struct nf_conntrack_helper *helper; struct va_format vaf; va_list args; @@ -331,14 +331,17 @@ void nf_ct_helper_log(struct sk_buff *skb, const struct nf_conn *ct, vaf.fmt = fmt; vaf.va = &args; - /* Called from the helper function, this call never fails */ help = nfct_help(ct); + if (help) { + const struct nf_conntrack_helper *helper; - /* rcu_read_lock()ed by nf_hook_thresh */ - helper = rcu_dereference(help->helper); + helper = rcu_dereference(help->helper); + if (helper) + helper_name = helper->name; + } nf_log_packet(nf_ct_net(ct), nf_ct_l3num(ct), 0, skb, NULL, NULL, NULL, - "nf_ct_%s: dropping packet: %pV ", helper->name, &vaf); + "helper %s dropping packet: %pV ", helper_name, &vaf); va_end(args); } -- cgit v1.2.3 From 5522d65d81a711c60a9969d37a485d48d0ad1496 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Sun, 10 May 2026 13:46:05 +0300 Subject: ipvs: avoid possible loop in ip_vs_dst_event on resizing Sashiko points out that unprivileged user can frequently call ip_vs_flush() or ip_vs_del_service() to trigger svc_table_changes updates that can lead to infinite loop in ip_vs_dst_event(). This can also happen if the user triggers frequent table resizing without deleting all services. We should also consider the possible effects if the user triggers many NETDEV_DOWN events. One way to solve it is to hold svc_resize_sem in ip_vs_dst_event() but this can block the dev notifier during the whole resizing process. Instead, use new rw_semaphore svc_replace_sem to protect just the svc_table replacement which is a short code section. Then hold svc_replace_sem in ip_vs_dst_event() to serialize with replacing the svc_table. As result, loop is avoided as there is no need to repeat the table walking from the start. By this way changes in svc_table_changes can happen only when all services are removed and all dev references dropped which allows us to abort the table walking. As IP_VS_WORK_SVC_NORESIZE is the flag used to stop the svc_resize_work under service_mutex, we should check only this flag often but not while under service_mutex. To remove the mutex_trylock() for service_mutex in the second phase where the resizer installs the new table after rehashing, we will avoid holding the service_mutex there. As result, the code in configuration context which is under service_mutex should access ipvs->svc_table under RCU because it can be replaced at anytime and released after a RCU grace period. As for ip_vs_zero_all(), it needs different solution as a table walker which can escape single RCU read-side critical section: to hold the svc_replace_sem to prevent table to be replaced. In ip_vs_status_show() prefer to hold svc_replace_sem to avoid many loops, just detect if the svc_table is removed. Prefer the newly attached table for the u_thresh/l_thresh checks to know when to grow/shrink while adding or deleting services because the new table size is based on the latest parameters. Link: https://sashiko.dev/#/patchset/20260505001648.360569-1-pablo%40netfilter.org Fixes: 840aac3d900d ("ipvs: use resizable hash table for services") Signed-off-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- include/net/ip_vs.h | 3 +- net/netfilter/ipvs/ip_vs_ctl.c | 187 +++++++++++++++++++++++++++-------------- 2 files changed, 124 insertions(+), 66 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 02762ce73a0c..a02e569813d2 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -1186,8 +1186,9 @@ struct netns_ipvs { struct timer_list dest_trash_timer; /* expiration timer */ struct mutex service_mutex; /* service reconfig */ struct rw_semaphore svc_resize_sem; /* svc_table resizing */ + struct rw_semaphore svc_replace_sem; /* svc_table replace */ struct delayed_work svc_resize_work; /* resize svc_table */ - atomic_t svc_table_changes;/* ++ on new table */ + atomic_t svc_table_changes;/* ++ on table changes */ /* Service counters */ atomic_t num_services[IP_VS_AF_MAX]; /* Services */ atomic_t fwm_services[IP_VS_AF_MAX]; /* Services */ diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index c7c7f6a7a9f6..bd9cae44d214 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -327,18 +327,22 @@ ip_vs_use_count_dec(void) /* Service hashing: * Operation Locking order * --------------------------------------------------------------------------- - * add table service_mutex, svc_resize_sem(W) - * del table service_mutex - * move between tables svc_resize_sem(W), seqcount_t(W), bit lock - * add/del service service_mutex, bit lock + * add first table service_mutex + * attach new table service_mutex + * add/del service service_mutex, RCU, bit lock + * move between tables (rehash) svc_resize_sem(W), seqcount_t(W), bit lock + * replace old with attached svc_resize_sem(W), svc_replace_sem(W) * find service RCU, seqcount_t(R) * walk services(blocking) service_mutex, svc_resize_sem(R) * walk services(non-blocking) RCU, seqcount_t(R) + * walk services(non-blocking) svc_resize_sem(R), RCU, seqcount_t(R) + * walk services(non-blocking) svc_replace_sem(R), RCU, seqcount_t(R) + * del table service_mutex after stopped work * - * - new tables are linked/unlinked under service_mutex and svc_resize_sem - * - new table is linked on resizing and all operations can run in parallel - * in 2 tables until the new table is registered as current one - * - two contexts can modify buckets: config and table resize, both in + * - new table is attached on resizing under service_mutex and all operations + * can run in parallel in 2 tables until the new table is registered as current + * one + * - two contexts can modify buckets: config and table resize (work), both in * process context * - only table resizer can move entries, so we do not protect t->seqc[] * items with t->lock[] @@ -346,9 +350,13 @@ ip_vs_use_count_dec(void) * services are moved to new table * - move operations may disturb readers: find operation will not miss entries * but walkers may see same entry twice if they are forced to retry chains - * - walkers using cond_resched_rcu() on !PREEMPT_RCU may need to hold - * service_mutex to disallow new tables to be installed or to check + * or to walk the newly attached second table + * - walkers using cond_resched_rcu() on !PREEMPT_RCU may need to check * svc_table_changes and repeat the RCU read section if new table is installed + * - walkers may serialize with the whole resizing process (svc_resize_sem) + * to prevent seeing same service twice or just with the svc_table + * replace (svc_replace_sem) when we can see entries twice but we + * prefer to run concurrently with the rehashing. */ /* @@ -387,9 +395,16 @@ static int ip_vs_svc_hash(struct ip_vs_service *svc) /* increase its refcnt because it is referenced by the svc table */ atomic_inc(&svc->refcnt); + /* We know if new table is attached under service_mutex but rely on + * RCU to hold the old table to be freed in resizer + */ + rcu_read_lock(); + + /* This can be the old or the new table */ + t = rcu_dereference(ipvs->svc_table); + /* New entries go into recent table */ - t = rcu_dereference_protected(ipvs->svc_table, 1); - t = rcu_dereference_protected(t->new_tbl, 1); + t = rcu_dereference(t->new_tbl); if (svc->fwmark == 0) { /* @@ -410,6 +425,8 @@ static int ip_vs_svc_hash(struct ip_vs_service *svc) hlist_bl_add_head_rcu(&svc->s_list, head); hlist_bl_unlock(head); + rcu_read_unlock(); + return 1; } @@ -432,7 +449,13 @@ static int ip_vs_svc_unhash(struct ip_vs_service *svc) return 0; } - t = rcu_dereference_protected(ipvs->svc_table, 1); + /* We know if new table is attached under service_mutex but rely on + * RCU to hold the old table to be freed in resizer + */ + rcu_read_lock(); + + /* This can be the old or the new table */ + t = rcu_dereference(ipvs->svc_table); hash_key = READ_ONCE(svc->hash_key); /* We need to lock the bucket in the right table */ if (ip_vs_rht_same_table(t, hash_key)) { @@ -443,13 +466,13 @@ static int ip_vs_svc_unhash(struct ip_vs_service *svc) /* Moved to new table ? */ if (hash_key != hash_key2) { hlist_bl_unlock(head); - t = rcu_dereference_protected(t->new_tbl, 1); + t = rcu_dereference(t->new_tbl); head = t->buckets + (hash_key2 & t->mask); hlist_bl_lock(head); } } else { /* It is already moved to new table */ - t = rcu_dereference_protected(t->new_tbl, 1); + t = rcu_dereference(t->new_tbl); head = t->buckets + (hash_key & t->mask); hlist_bl_lock(head); } @@ -459,6 +482,8 @@ static int ip_vs_svc_unhash(struct ip_vs_service *svc) svc->flags &= ~IP_VS_SVC_F_HASHED; atomic_dec(&svc->refcnt); hlist_bl_unlock(head); + + rcu_read_unlock(); return 1; } @@ -666,15 +691,14 @@ static void svc_resize_work_handler(struct work_struct *work) goto unlock_sem; more_work = false; clear_bit(IP_VS_WORK_SVC_RESIZE, &ipvs->work_flags); - if (!READ_ONCE(ipvs->enable) || - test_bit(IP_VS_WORK_SVC_NORESIZE, &ipvs->work_flags)) + if (!READ_ONCE(ipvs->enable)) goto unlock_m; t = rcu_dereference_protected(ipvs->svc_table, 1); /* Do nothing if table is removed */ if (!t) goto unlock_m; - /* New table needs to be registered? BUG! */ - if (t != rcu_dereference_protected(t->new_tbl, 1)) + /* New table already attached? BUG! */ + if (t != rcu_access_pointer(t->new_tbl)) goto unlock_m; lfactor = sysctl_svc_lfactor(ipvs); @@ -691,6 +715,7 @@ static void svc_resize_work_handler(struct work_struct *work) /* Flip the table_id */ t_new->table_id = t->table_id ^ IP_VS_RHT_TABLE_ID_MASK; + /* Attach new table */ rcu_assign_pointer(t->new_tbl, t_new); /* Allow add/del to new_tbl while moving from old table */ mutex_unlock(&ipvs->service_mutex); @@ -698,8 +723,8 @@ static void svc_resize_work_handler(struct work_struct *work) ip_vs_rht_for_each_bucket(t, bucket, head) { same_bucket: if (++limit >= 16) { - if (!READ_ONCE(ipvs->enable) || - test_bit(IP_VS_WORK_SVC_NORESIZE, + /* Check if work is stopped */ + if (test_bit(IP_VS_WORK_SVC_NORESIZE, &ipvs->work_flags)) goto unlock_sem; if (resched_score >= 100) { @@ -764,16 +789,12 @@ same_bucket: goto same_bucket; } - /* Tables can be switched only under service_mutex */ - while (!mutex_trylock(&ipvs->service_mutex)) { - cond_resched(); - if (!READ_ONCE(ipvs->enable) || - test_bit(IP_VS_WORK_SVC_NORESIZE, &ipvs->work_flags)) - goto unlock_sem; - } - if (!READ_ONCE(ipvs->enable) || - test_bit(IP_VS_WORK_SVC_NORESIZE, &ipvs->work_flags)) - goto unlock_m; + /* Serialize with readers that don't like svc_table changes */ + down_write(&ipvs->svc_replace_sem); + + /* Check if work is stopped to avoid synchronize_rcu() */ + if (test_bit(IP_VS_WORK_SVC_NORESIZE, &ipvs->work_flags)) + goto unlock_repl; rcu_assign_pointer(ipvs->svc_table, t_new); /* Inform readers that new table is installed */ @@ -781,8 +802,8 @@ same_bucket: atomic_inc(&ipvs->svc_table_changes); t_free = t; -unlock_m: - mutex_unlock(&ipvs->service_mutex); +unlock_repl: + up_write(&ipvs->svc_replace_sem); unlock_sem: up_write(&ipvs->svc_resize_sem); @@ -801,6 +822,11 @@ out: test_bit(IP_VS_WORK_SVC_NORESIZE, &ipvs->work_flags)) return; queue_delayed_work(system_unbound_wq, &ipvs->svc_resize_work, 1); + return; + +unlock_m: + mutex_unlock(&ipvs->service_mutex); + goto unlock_sem; } static inline void @@ -1691,6 +1717,7 @@ ip_vs_add_service(struct netns_ipvs *ipvs, struct ip_vs_service_user_kern *u, struct ip_vs_pe *pe = NULL; int ret_hooks = -1; int ret = 0; + bool grow; /* increase the module use count */ if (!ip_vs_use_count_inc()) @@ -1732,16 +1759,25 @@ ip_vs_add_service(struct netns_ipvs *ipvs, struct ip_vs_service_user_kern *u, } #endif - t = rcu_dereference_protected(ipvs->svc_table, 1); + /* The old table can be freed, protect it with RCU */ + rcu_read_lock(); + t = rcu_dereference(ipvs->svc_table); if (!t) { int lfactor = sysctl_svc_lfactor(ipvs); int new_size = ip_vs_svc_desired_size(ipvs, NULL, lfactor); + rcu_read_unlock(); t_new = ip_vs_svc_table_alloc(ipvs, new_size, lfactor); if (!t_new) { ret = -ENOMEM; goto out_err; } + grow = false; + } else { + /* Even the currently attached new table may need to grow */ + t = rcu_dereference(t->new_tbl); + grow = ip_vs_get_num_services(ipvs) + 1 > t->u_thresh; + rcu_read_unlock(); } if (!rcu_dereference_protected(ipvs->conn_tab, 1)) { @@ -1800,6 +1836,7 @@ ip_vs_add_service(struct netns_ipvs *ipvs, struct ip_vs_service_user_kern *u, goto out_err; if (t_new) { + /* Add table for first time */ clear_bit(IP_VS_WORK_SVC_NORESIZE, &ipvs->work_flags); rcu_assign_pointer(ipvs->svc_table, t_new); t_new = NULL; @@ -1831,8 +1868,7 @@ ip_vs_add_service(struct netns_ipvs *ipvs, struct ip_vs_service_user_kern *u, ip_vs_svc_hash(svc); /* Schedule resize work */ - if (t && ip_vs_get_num_services(ipvs) > t->u_thresh && - !test_and_set_bit(IP_VS_WORK_SVC_RESIZE, &ipvs->work_flags)) + if (grow && !test_and_set_bit(IP_VS_WORK_SVC_RESIZE, &ipvs->work_flags)) queue_delayed_work(system_unbound_wq, &ipvs->svc_resize_work, 1); @@ -2054,7 +2090,6 @@ static int ip_vs_del_service(struct ip_vs_service *svc) return -EEXIST; ipvs = svc->ipvs; ip_vs_unlink_service(svc, false); - t = rcu_dereference_protected(ipvs->svc_table, 1); /* Drop the table if no more services */ ns = ip_vs_get_num_services(ipvs); @@ -2062,6 +2097,7 @@ static int ip_vs_del_service(struct ip_vs_service *svc) /* Stop the resizer and drop the tables */ set_bit(IP_VS_WORK_SVC_NORESIZE, &ipvs->work_flags); cancel_delayed_work_sync(&ipvs->svc_resize_work); + t = rcu_dereference_protected(ipvs->svc_table, 1); if (t) { rcu_assign_pointer(ipvs->svc_table, NULL); /* Inform readers that table is removed */ @@ -2075,11 +2111,19 @@ static int ip_vs_del_service(struct ip_vs_service *svc) t = p; } } - } else if (ns <= t->l_thresh && - !test_and_set_bit(IP_VS_WORK_SVC_RESIZE, - &ipvs->work_flags)) { - queue_delayed_work(system_unbound_wq, &ipvs->svc_resize_work, - 1); + } else { + bool shrink; + + rcu_read_lock(); + t = rcu_dereference(ipvs->svc_table); + /* Even the currently attached new table may need to shrink */ + t = rcu_dereference(t->new_tbl); + shrink = ns <= t->l_thresh; + rcu_read_unlock(); + if (shrink && !test_and_set_bit(IP_VS_WORK_SVC_RESIZE, + &ipvs->work_flags)) + queue_delayed_work(system_unbound_wq, + &ipvs->svc_resize_work, 1); } return 0; } @@ -2184,17 +2228,21 @@ static int ip_vs_dst_event(struct notifier_block *this, unsigned long event, struct ip_vs_service *svc; struct hlist_bl_node *e; struct ip_vs_dest *dest; - int old_gen, new_gen; + int old_gen; if (event != NETDEV_DOWN || !ipvs) return NOTIFY_DONE; IP_VS_DBG(3, "%s() dev=%s\n", __func__, dev->name); + /* Allow concurrent rehashing on resize but to avoid loop + * serialize with installing the new table. + */ + down_read(&ipvs->svc_replace_sem); + old_gen = atomic_read(&ipvs->svc_table_changes); rcu_read_lock(); -repeat: smp_rmb(); /* ipvs->svc_table and svc_table_changes */ ip_vs_rht_walk_buckets_rcu(ipvs->svc_table, head) { hlist_bl_for_each_entry_rcu(svc, e, head, s_list) { @@ -2207,17 +2255,17 @@ repeat: } resched_score++; if (resched_score >= 100) { - resched_score = 0; cond_resched_rcu(); - new_gen = atomic_read(&ipvs->svc_table_changes); - /* New table installed ? */ - if (old_gen != new_gen) { - old_gen = new_gen; - goto repeat; - } + /* Flushed? So no more dev refs */ + if (atomic_read(&ipvs->svc_table_changes) != old_gen) + goto done; + resched_score = 0; } } + +done: rcu_read_unlock(); + up_read(&ipvs->svc_replace_sem); return NOTIFY_DONE; } @@ -2244,6 +2292,10 @@ static int ip_vs_zero_all(struct netns_ipvs *ipvs) struct ip_vs_service *svc; struct hlist_bl_node *e; + /* svc_table can not be replaced (svc_replace_sem) or + * removed (service_mutex) + */ + down_read(&ipvs->svc_replace_sem); rcu_read_lock(); ip_vs_rht_walk_buckets_rcu(ipvs->svc_table, head) { @@ -2259,6 +2311,7 @@ static int ip_vs_zero_all(struct netns_ipvs *ipvs) } rcu_read_unlock(); + up_read(&ipvs->svc_replace_sem); ip_vs_zero_stats(&ipvs->tot_stats->s); return 0; @@ -3062,6 +3115,7 @@ static int ip_vs_status_show(struct seq_file *seq, void *v) u32 sum; int i; + /* Info for conns */ rcu_read_lock(); t = rcu_dereference(ipvs->conn_tab); @@ -3123,6 +3177,12 @@ repeat_conn: } after_conns: + rcu_read_unlock(); + + /* Info for services */ + down_read(&ipvs->svc_replace_sem); + rcu_read_lock(); + t = rcu_dereference(ipvs->svc_table); count = ip_vs_get_num_services(ipvs); @@ -3133,9 +3193,7 @@ after_conns: if (!count) goto after_svc; old_gen = atomic_read(&ipvs->svc_table_changes); - loops = 0; -repeat_svc: smp_rmb(); /* ipvs->svc_table and svc_table_changes */ memset(counts, 0, sizeof(counts)); ip_vs_rht_for_each_table_rcu(ipvs->svc_table, t, pt) { @@ -3157,15 +3215,10 @@ repeat_svc: if (resched_score >= 100) { resched_score = 0; cond_resched_rcu(); - new_gen = atomic_read(&ipvs->svc_table_changes); - /* New table installed ? */ - if (old_gen != new_gen) { - /* Too many changes? */ - if (++loops >= 5) - goto after_svc; - old_gen = new_gen; - goto repeat_svc; - } + /* Flushed? */ + if (atomic_read(&ipvs->svc_table_changes) != + old_gen) + goto after_svc; } counts[count]++; } @@ -3184,6 +3237,9 @@ repeat_svc: } after_svc: + rcu_read_unlock(); + up_read(&ipvs->svc_replace_sem); + seq_printf(seq, "Stats thread slots:\t%d (max %lu)\n", ipvs->est_kt_count, ipvs->est_max_threads); seq_printf(seq, "Stats chain max len:\t%d\n", ipvs->est_chain_max); @@ -3191,7 +3247,6 @@ after_svc: ipvs->est_chain_max * IPVS_EST_CHAIN_FACTOR * IPVS_EST_NTICKS); - rcu_read_unlock(); return 0; } @@ -3503,7 +3558,7 @@ __ip_vs_get_service_entries(struct netns_ipvs *ipvs, int ret = 0; lockdep_assert_held(&ipvs->svc_resize_sem); - /* All service modifications are disabled, go ahead */ + /* All svc_table modifications are disabled, go ahead */ ip_vs_rht_walk_buckets(ipvs->svc_table, head) { hlist_bl_for_each_entry(svc, e, head, s_list) { /* Only expose IPv4 entries to old interface */ @@ -3687,7 +3742,7 @@ do_ip_vs_get_ctl(struct sock *sk, int cmd, void __user *user, int *len) pr_err("length: %u != %zu\n", *len, size); return -EINVAL; } - /* Protect against table resizer moving the entries. + /* Prevent modifications to the list with services. * Try reverse locking, so that we do not hold the mutex * while waiting for semaphore. */ @@ -4029,6 +4084,7 @@ static int ip_vs_genl_dump_services(struct sk_buff *skb, int start = cb->args[0]; int idx = 0; + /* Make sure we do not see same service twice during resize */ down_read(&ipvs->svc_resize_sem); rcu_read_lock(); ip_vs_rht_walk_buckets_safe_rcu(ipvs->svc_table, head) { @@ -5072,6 +5128,7 @@ int __net_init ip_vs_control_net_init(struct netns_ipvs *ipvs) /* Initialize service_mutex, svc_table per netns */ __mutex_init(&ipvs->service_mutex, "ipvs->service_mutex", &__ipvs_service_key); init_rwsem(&ipvs->svc_resize_sem); + init_rwsem(&ipvs->svc_replace_sem); INIT_DELAYED_WORK(&ipvs->svc_resize_work, svc_resize_work_handler); atomic_set(&ipvs->svc_table_changes, 0); RCU_INIT_POINTER(ipvs->svc_table, NULL); -- cgit v1.2.3 From 53d7fd878c28b28e03769071d1f28ef031a060ad Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Thu, 14 May 2026 10:55:10 +0200 Subject: netfilter: ipset: fix a potential dump-destroy race When dumping sets in order to create the proper order for restore, the list type of sets dumped last. Therefore internally we run the dumping loop twice: first with all non-list type of sets and skipping the list type ones and then secondly for the list type of sets. Sashiko noticed that there's a potential race between dump and destroy if in the first loop the last set was a list type of set: its pointer remains unreferenced and a concurrent destroy can free it. Fix the issue by resetting the variable holding the pointer. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index c5a26236a0bb..0874029cb0f2 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -1613,6 +1613,7 @@ dump_last: ((dump_type == DUMP_ALL) == !!(set->type->features & IPSET_DUMP_LAST))) { write_unlock_bh(&ip_set_ref_lock); + set = NULL; continue; } pr_debug("List set: %s\n", set->name); -- cgit v1.2.3 From b6a91f68ebfed9c38e0e9150f58a9b85da07181c Mon Sep 17 00:00:00 2001 From: Yizhou Zhao Date: Tue, 12 May 2026 01:30:41 +0800 Subject: netfilter: nft_inner: Fix IPv6 inner_thoff desync MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In nft_inner_parse_l2l3(), when processing inner IPv6 packets, ipv6_find_hdr() correctly computes the transport header offset traversing all extension headers, but the result is immediately overwritten with nhoff + sizeof(_ip6h) (40 bytes), which only accounts for the IPv6 base header. This creates a desync between inner_thoff (wrong — points to extension header start) and l4proto (correct — e.g., IPPROTO_TCP), enabling transport header forgery and potential firewall bypass. This issue affects stable versions from Linux 6.2. For comparison, the normal (non-inner) IPv6 path correctly preserves ipv6_find_hdr()'s result. Removing the incorrect overwrite ensures that ipv6_find_hdr()'s calculated transport header offset is preserved, thereby fixing the desynchronization. Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Cc: stable@vger.kernel.org Reported-by: Yizhou Zhao Reported-by: Yuxiang Yang Reported-by: Xuewei Feng Reported-by: Qi Li Reported-by: Ke Xu Assisted-by: GLM:5.1 Z.ai Signed-off-by: Yizhou Zhao Reviewed-by: Fernando Fernandez Mancera Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_inner.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/netfilter/nft_inner.c b/net/netfilter/nft_inner.c index 03ffb1159fc1..859aa38e333b 100644 --- a/net/netfilter/nft_inner.c +++ b/net/netfilter/nft_inner.c @@ -163,7 +163,6 @@ static int nft_inner_parse_l2l3(const struct nft_inner *priv, return -1; if (fragoff == 0) { - thoff = nhoff + sizeof(_ip6h); ctx->flags |= NFT_PAYLOAD_CTX_INNER_TH; ctx->inner_thoff = thoff; ctx->l4proto = l4proto; -- cgit v1.2.3 From 0d3a282ab5f165fc207ff49ea5b6ad8f54616bd6 Mon Sep 17 00:00:00 2001 From: Nan Li Date: Tue, 12 May 2026 16:50:01 +0800 Subject: netfilter: ipset: stop hash:* range iteration at end The following hash set variants: hash:ip,mark hash:ip,port hash:ip,port,ip hash:ip,port,net iterate IPv4 ranges with a 32-bit iterator. The iterator must stop once the last address in the requested range has been processed. Advancing it once more can move the traversal state past the end of the request, so a later retry may continue from an unintended position. Handle the iterator increment explicitly at the end of the loop and stop once the upper bound has been processed. This keeps the existing retry behaviour intact for valid ranges while preventing traversal from continuing past the original boundary. Fixes: 48596a8ddc46 ("netfilter: ipset: Fix adding an IPv4 range containing more than 2^31 addresses") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Nan Li Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_hash_ipmark.c | 6 +++++- net/netfilter/ipset/ip_set_hash_ipport.c | 5 ++++- net/netfilter/ipset/ip_set_hash_ipportip.c | 5 ++++- net/netfilter/ipset/ip_set_hash_ipportnet.c | 5 ++++- 4 files changed, 17 insertions(+), 4 deletions(-) diff --git a/net/netfilter/ipset/ip_set_hash_ipmark.c b/net/netfilter/ipset/ip_set_hash_ipmark.c index a22ec1a6f6ec..e26ca2a370e3 100644 --- a/net/netfilter/ipset/ip_set_hash_ipmark.c +++ b/net/netfilter/ipset/ip_set_hash_ipmark.c @@ -150,7 +150,7 @@ hash_ipmark4_uadt(struct ip_set *set, struct nlattr *tb[], if (retried) ip = ntohl(h->next.ip); - for (; ip <= ip_to; ip++, i++) { + for (; ip <= ip_to; i++) { e.ip = htonl(ip); if (i > IPSET_MAX_RANGE) { hash_ipmark4_data_next(&h->next, &e); @@ -162,6 +162,10 @@ hash_ipmark4_uadt(struct ip_set *set, struct nlattr *tb[], return ret; ret = 0; + + if (ip == ip_to) + break; + ip++; } return ret; } diff --git a/net/netfilter/ipset/ip_set_hash_ipport.c b/net/netfilter/ipset/ip_set_hash_ipport.c index e977b5a9c48d..41ca24a22a02 100644 --- a/net/netfilter/ipset/ip_set_hash_ipport.c +++ b/net/netfilter/ipset/ip_set_hash_ipport.c @@ -186,7 +186,7 @@ hash_ipport4_uadt(struct ip_set *set, struct nlattr *tb[], if (retried) ip = ntohl(h->next.ip); - for (; ip <= ip_to; ip++) { + for (; ip <= ip_to;) { p = retried && ip == ntohl(h->next.ip) ? ntohs(h->next.port) : port; for (; p <= port_to; p++, i++) { @@ -203,6 +203,9 @@ hash_ipport4_uadt(struct ip_set *set, struct nlattr *tb[], ret = 0; } + if (ip == ip_to) + break; + ip++; } return ret; } diff --git a/net/netfilter/ipset/ip_set_hash_ipportip.c b/net/netfilter/ipset/ip_set_hash_ipportip.c index 39a01934b153..b9ac2efaa15c 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportip.c +++ b/net/netfilter/ipset/ip_set_hash_ipportip.c @@ -182,7 +182,7 @@ hash_ipportip4_uadt(struct ip_set *set, struct nlattr *tb[], if (retried) ip = ntohl(h->next.ip); - for (; ip <= ip_to; ip++) { + for (; ip <= ip_to;) { p = retried && ip == ntohl(h->next.ip) ? ntohs(h->next.port) : port; for (; p <= port_to; p++, i++) { @@ -199,6 +199,9 @@ hash_ipportip4_uadt(struct ip_set *set, struct nlattr *tb[], ret = 0; } + if (ip == ip_to) + break; + ip++; } return ret; } diff --git a/net/netfilter/ipset/ip_set_hash_ipportnet.c b/net/netfilter/ipset/ip_set_hash_ipportnet.c index 5c6de605a9fb..2d6652d43199 100644 --- a/net/netfilter/ipset/ip_set_hash_ipportnet.c +++ b/net/netfilter/ipset/ip_set_hash_ipportnet.c @@ -274,7 +274,7 @@ hash_ipportnet4_uadt(struct ip_set *set, struct nlattr *tb[], p = port; ip2 = ip2_from; } - for (; ip <= ip_to; ip++) { + for (; ip <= ip_to;) { e.ip = htonl(ip); for (; p <= port_to; p++) { e.port = htons(p); @@ -298,6 +298,9 @@ hash_ipportnet4_uadt(struct ip_set *set, struct nlattr *tb[], ip2 = ip2_from; } p = port; + if (ip == ip_to) + break; + ip++; } return ret; } -- cgit v1.2.3 From a6cb3ff979855f7f0ee9450a947fe8f96c2ba37a Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Tue, 12 May 2026 11:30:49 +0200 Subject: netfilter: nft_inner: release local_lock before re-enabling softirqs Quoting sashiko: In the error path, local_bh_enable() is called before local_unlock_nested_bh(). Fixes: ba36fada9ab4 ("netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx") Signed-off-by: Florian Westphal Reviewed-by: Fernando Fernandez Mancera Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_inner.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nft_inner.c b/net/netfilter/nft_inner.c index 859aa38e333b..d14ca157910b 100644 --- a/net/netfilter/nft_inner.c +++ b/net/netfilter/nft_inner.c @@ -246,8 +246,8 @@ static bool nft_inner_restore_tun_ctx(const struct nft_pktinfo *pkt, local_lock_nested_bh(&nft_pcpu_tun_ctx.bh_lock); this_cpu_tun_ctx = this_cpu_ptr(&nft_pcpu_tun_ctx.ctx); if (this_cpu_tun_ctx->cookie != (unsigned long)pkt->skb) { - local_bh_enable(); local_unlock_nested_bh(&nft_pcpu_tun_ctx.bh_lock); + local_bh_enable(); return false; } *tun_ctx = *this_cpu_tun_ctx; -- cgit v1.2.3 From 4322dcde6b4173c2d8e8e6118ed290794263bcc8 Mon Sep 17 00:00:00 2001 From: Zhengchuan Liang Date: Wed, 13 May 2026 15:57:17 +0800 Subject: netfilter: ip6t_hbh: reject oversized option lists struct ip6t_opts stores at most IP6T_OPTS_OPTSNR option descriptors, but hbh_mt6_check() does not reject larger optsnr values supplied from userspace. Validate optsnr in the rule setup path so only match data that fits the fixed-size opts array can be installed. This follows the existing xtables pattern of rejecting invalid user-provided counts in checkentry() and keeps the packet matching path unchanged. `struct ip6t_opts` has a fixed `opts[IP6T_OPTS_OPTSNR]` array, where `IP6T_OPTS_OPTSNR` is 16, then off-by-one array access is possible: [ 137.924693][ T8692] UBSAN: array-index-out-of-bounds in ../net/ipv6/netfilter/ip6t_hbh.c:110:29 [ 137.926167][ T8692] index 16 is out of range for type '__u16 [16]' Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Zhengchuan Liang Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso --- net/ipv6/netfilter/ip6t_hbh.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv6/netfilter/ip6t_hbh.c b/net/ipv6/netfilter/ip6t_hbh.c index e7a3fb9355ee..450dd53846a2 100644 --- a/net/ipv6/netfilter/ip6t_hbh.c +++ b/net/ipv6/netfilter/ip6t_hbh.c @@ -168,6 +168,10 @@ static int hbh_mt6_check(const struct xt_mtchk_param *par) pr_debug("unknown flags %X\n", optsinfo->invflags); return -EINVAL; } + if (optsinfo->optsnr > IP6T_OPTS_OPTSNR) { + pr_debug("too many supported opts specified\n"); + return -EINVAL; + } if (optsinfo->flags & IP6T_OPTS_NSTRICT) { pr_debug("Not strict - not implemented"); -- cgit v1.2.3 From c0c42a0fb27144c1cd7509f94bec0d3bcca98c72 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Thu, 14 May 2026 10:55:11 +0200 Subject: netfilter: ipset: Fix data race between add and list header in all hash types The "ipset list -terse" command is actually a dump operation which may run parallel with "ipset add" commands, which can trigger an internal resizing of the hash type of sets just being dumped. However, dumping just the header part of the set was not protected against underlying resizing. Fix it by protecting the header dumping part as well. Fixes: c4c997839cf9 ("netfilter: ipset: Fix parallel resizing and listing of the same set") Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 0874029cb0f2..3706b4a85a0f 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -1649,13 +1649,13 @@ dump_last: if (cb->args[IPSET_CB_PROTO] > IPSET_PROTOCOL_MIN && nla_put_net16(skb, IPSET_ATTR_INDEX, htons(index))) goto nla_put_failure; + if (set->variant->uref) + set->variant->uref(set, cb, true); ret = set->variant->head(set, skb); if (ret < 0) goto release_refcount; if (dump_flags & IPSET_FLAG_LIST_HEADER) goto next_set; - if (set->variant->uref) - set->variant->uref(set, cb, true); fallthrough; default: ret = set->variant->list(set, skb, cb); -- cgit v1.2.3 From 2358f7427ccd6ec8867a48205d8fcec973683a3f Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Fri, 8 May 2026 22:58:58 +0200 Subject: netfilter: ipset: Fix data race between add and dump in all hash types When adding a new entry to the next position in the existing hash bucket, the position index was incremented too early and parallel dump could read it before the entry was populated with the value. Move the setting of the position index after populating the entry. v2: Position counting fixed, noticed by Florian Westphal. Fixes: 18f84d41d34f ("netfilter: ipset: Introduce RCU locking in hash:* types") Reported-by: syzbot+786c889f046e8b003ca6@syzkaller.appspotmail.com Reported-by: syzbot+1da17e4b41d795df059e@syzkaller.appspotmail.com Reported-by: syzbot+421c5f3ff8e9493084d9@syzkaller.appspotmail.com Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_hash_gen.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h index b79e5dd2af03..133ce4611eed 100644 --- a/net/netfilter/ipset/ip_set_hash_gen.h +++ b/net/netfilter/ipset/ip_set_hash_gen.h @@ -844,7 +844,7 @@ mtype_add(struct ip_set *set, void *value, const struct ip_set_ext *ext, const struct mtype_elem *d = value; struct mtype_elem *data; struct hbucket *n, *old = ERR_PTR(-ENOENT); - int i, j = -1, ret; + int i, j = -1, npos = 0, ret; bool flag_exist = flags & IPSET_FLAG_EXIST; bool deleted = false, forceadd = false, reuse = false; u32 r, key, multi = 0, elements, maxelem; @@ -889,6 +889,7 @@ mtype_add(struct ip_set *set, void *value, const struct ip_set_ext *ext, ext_size(AHASH_INIT_SIZE, set->dsize); goto copy_elem; } + npos = n->pos; for (i = 0; i < n->pos; i++) { if (!test_bit(i, n->used)) { /* Reuse first deleted entry */ @@ -962,7 +963,8 @@ mtype_add(struct ip_set *set, void *value, const struct ip_set_ext *ext, } copy_elem: - j = n->pos++; + j = npos; + npos = n->pos + 1; data = ahash_data(n, j, set->dsize); copy_data: t->hregion[r].elements++; @@ -985,6 +987,7 @@ overwrite_extensions: if (SET_WITH_TIMEOUT(set)) ip_set_timeout_set(ext_timeout(data, set), ext->timeout); smp_mb__before_atomic(); + n->pos = npos; set_bit(j, n->used); if (old != ERR_PTR(-ENOENT)) { rcu_assign_pointer(hbucket(t, key), n); -- cgit v1.2.3 From 7f7445840b7771338618930e45ee641104b38ed8 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Thu, 14 May 2026 10:55:13 +0200 Subject: netfilter: ipset: annotate "pos" for concurrent readers/writers The "pos" structure member of struct hbucket stores the first free slot in the hash bucket of a hash type of set and there are concurrent readers/writers. Annotate accesses properly. Fixes: 18f84d41d34f ("netfilter: ipset: Introduce RCU locking in hash:* types") Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_hash_gen.h | 62 +++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 24 deletions(-) diff --git a/net/netfilter/ipset/ip_set_hash_gen.h b/net/netfilter/ipset/ip_set_hash_gen.h index 133ce4611eed..04e4627ddfc1 100644 --- a/net/netfilter/ipset/ip_set_hash_gen.h +++ b/net/netfilter/ipset/ip_set_hash_gen.h @@ -386,8 +386,9 @@ static void mtype_ext_cleanup(struct ip_set *set, struct hbucket *n) { int i; + u8 pos = smp_load_acquire(&n->pos); - for (i = 0; i < n->pos; i++) + for (i = 0; i < pos; i++) if (test_bit(i, n->used)) ip_set_ext_destroy(set, ahash_data(n, i, set->dsize)); } @@ -490,7 +491,7 @@ mtype_gc_do(struct ip_set *set, struct htype *h, struct htable *t, u32 r) #ifdef IP_SET_HASH_WITH_NETS u8 k; #endif - u8 htable_bits = t->htable_bits; + u8 pos, htable_bits = t->htable_bits; spin_lock_bh(&t->hregion[r].lock); for (i = ahash_bucket_start(r, htable_bits); @@ -498,7 +499,8 @@ mtype_gc_do(struct ip_set *set, struct htype *h, struct htable *t, u32 r) n = __ipset_dereference(hbucket(t, i)); if (!n) continue; - for (j = 0, d = 0; j < n->pos; j++) { + pos = smp_load_acquire(&n->pos); + for (j = 0, d = 0; j < pos; j++) { if (!test_bit(j, n->used)) { d++; continue; @@ -534,7 +536,7 @@ mtype_gc_do(struct ip_set *set, struct htype *h, struct htable *t, u32 r) /* Still try to delete expired elements. */ continue; tmp->size = n->size - AHASH_INIT_SIZE; - for (j = 0, d = 0; j < n->pos; j++) { + for (j = 0, d = 0; j < pos; j++) { if (!test_bit(j, n->used)) continue; data = ahash_data(n, j, dsize); @@ -623,7 +625,7 @@ mtype_resize(struct ip_set *set, bool retried) { struct htype *h = set->data; struct htable *t, *orig; - u8 htable_bits; + u8 pos, htable_bits; size_t hsize, dsize = set->dsize; #ifdef IP_SET_HASH_WITH_NETS u8 flags; @@ -685,7 +687,8 @@ retry: n = __ipset_dereference(hbucket(orig, i)); if (!n) continue; - for (j = 0; j < n->pos; j++) { + pos = smp_load_acquire(&n->pos); + for (j = 0; j < pos; j++) { if (!test_bit(j, n->used)) continue; data = ahash_data(n, j, dsize); @@ -809,9 +812,10 @@ mtype_ext_size(struct ip_set *set, u32 *elements, size_t *ext_size) { struct htype *h = set->data; const struct htable *t; - u32 i, j, r; struct hbucket *n; struct mtype_elem *data; + u32 i, j, r; + u8 pos; t = rcu_dereference_bh(h->table); for (r = 0; r < ahash_numof_locks(t->htable_bits); r++) { @@ -820,7 +824,8 @@ mtype_ext_size(struct ip_set *set, u32 *elements, size_t *ext_size) n = rcu_dereference_bh(hbucket(t, i)); if (!n) continue; - for (j = 0; j < n->pos; j++) { + pos = smp_load_acquire(&n->pos); + for (j = 0; j < pos; j++) { if (!test_bit(j, n->used)) continue; data = ahash_data(n, j, set->dsize); @@ -844,10 +849,11 @@ mtype_add(struct ip_set *set, void *value, const struct ip_set_ext *ext, const struct mtype_elem *d = value; struct mtype_elem *data; struct hbucket *n, *old = ERR_PTR(-ENOENT); - int i, j = -1, npos = 0, ret; + int i, j = -1, ret; bool flag_exist = flags & IPSET_FLAG_EXIST; bool deleted = false, forceadd = false, reuse = false; u32 r, key, multi = 0, elements, maxelem; + u8 npos = 0; rcu_read_lock_bh(); t = rcu_dereference_bh(h->table); @@ -889,8 +895,8 @@ mtype_add(struct ip_set *set, void *value, const struct ip_set_ext *ext, ext_size(AHASH_INIT_SIZE, set->dsize); goto copy_elem; } - npos = n->pos; - for (i = 0; i < n->pos; i++) { + npos = smp_load_acquire(&n->pos); + for (i = 0; i < npos; i++) { if (!test_bit(i, n->used)) { /* Reuse first deleted entry */ if (j == -1) { @@ -934,7 +940,7 @@ mtype_add(struct ip_set *set, void *value, const struct ip_set_ext *ext, if (elements >= maxelem) goto set_full; /* Create a new slot */ - if (n->pos >= n->size) { + if (npos >= n->size) { #ifdef IP_SET_HASH_WITH_MULTI if (h->bucketsize >= AHASH_MAX_TUNED) goto set_full; @@ -963,8 +969,7 @@ mtype_add(struct ip_set *set, void *value, const struct ip_set_ext *ext, } copy_elem: - j = npos; - npos = n->pos + 1; + j = npos++; data = ahash_data(n, j, set->dsize); copy_data: t->hregion[r].elements++; @@ -987,7 +992,8 @@ overwrite_extensions: if (SET_WITH_TIMEOUT(set)) ip_set_timeout_set(ext_timeout(data, set), ext->timeout); smp_mb__before_atomic(); - n->pos = npos; + /* Ensure all data writes are visible before updating position */ + smp_store_release(&n->pos, npos); set_bit(j, n->used); if (old != ERR_PTR(-ENOENT)) { rcu_assign_pointer(hbucket(t, key), n); @@ -1046,6 +1052,7 @@ mtype_del(struct ip_set *set, void *value, const struct ip_set_ext *ext, int i, j, k, r, ret = -IPSET_ERR_EXIST; u32 key, multi = 0; size_t dsize = set->dsize; + u8 pos; /* Userspace add and resize is excluded by the mutex. * Kernespace add does not trigger resize. @@ -1061,7 +1068,8 @@ mtype_del(struct ip_set *set, void *value, const struct ip_set_ext *ext, n = rcu_dereference_bh(hbucket(t, key)); if (!n) goto out; - for (i = 0, k = 0; i < n->pos; i++) { + pos = smp_load_acquire(&n->pos); + for (i = 0, k = 0; i < pos; i++) { if (!test_bit(i, n->used)) { k++; continue; @@ -1075,8 +1083,8 @@ mtype_del(struct ip_set *set, void *value, const struct ip_set_ext *ext, ret = 0; clear_bit(i, n->used); smp_mb__after_atomic(); - if (i + 1 == n->pos) - n->pos--; + if (i + 1 == pos) + smp_store_release(&n->pos, --pos); t->hregion[r].elements--; #ifdef IP_SET_HASH_WITH_NETS for (j = 0; j < IPSET_NET_COUNT; j++) @@ -1097,11 +1105,11 @@ mtype_del(struct ip_set *set, void *value, const struct ip_set_ext *ext, x->flags = flags; } } - for (; i < n->pos; i++) { + for (; i < pos; i++) { if (!test_bit(i, n->used)) k++; } - if (k == n->pos) { + if (k == pos) { t->hregion[r].ext_size -= ext_size(n->size, dsize); rcu_assign_pointer(hbucket(t, key), NULL); kfree_rcu(n, rcu); @@ -1112,7 +1120,7 @@ mtype_del(struct ip_set *set, void *value, const struct ip_set_ext *ext, if (!tmp) goto out; tmp->size = n->size - AHASH_INIT_SIZE; - for (j = 0, k = 0; j < n->pos; j++) { + for (j = 0, k = 0; j < pos; j++) { if (!test_bit(j, n->used)) continue; data = ahash_data(n, j, dsize); @@ -1173,6 +1181,7 @@ mtype_test_cidrs(struct ip_set *set, struct mtype_elem *d, int ret, i, j = 0; #endif u32 key, multi = 0; + u8 pos; pr_debug("test by nets\n"); for (; j < NLEN && h->nets[j].cidr[0] && !multi; j++) { @@ -1190,7 +1199,8 @@ mtype_test_cidrs(struct ip_set *set, struct mtype_elem *d, n = rcu_dereference_bh(hbucket(t, key)); if (!n) continue; - for (i = 0; i < n->pos; i++) { + pos = smp_load_acquire(&n->pos); + for (i = 0; i < pos; i++) { if (!test_bit(i, n->used)) continue; data = ahash_data(n, i, set->dsize); @@ -1224,6 +1234,7 @@ mtype_test(struct ip_set *set, void *value, const struct ip_set_ext *ext, struct mtype_elem *data; int i, ret = 0; u32 key, multi = 0; + u8 pos; rcu_read_lock_bh(); t = rcu_dereference_bh(h->table); @@ -1246,7 +1257,8 @@ mtype_test(struct ip_set *set, void *value, const struct ip_set_ext *ext, ret = 0; goto out; } - for (i = 0; i < n->pos; i++) { + pos = smp_load_acquire(&n->pos); + for (i = 0; i < pos; i++) { if (!test_bit(i, n->used)) continue; data = ahash_data(n, i, set->dsize); @@ -1363,6 +1375,7 @@ mtype_list(const struct ip_set *set, /* We assume that one hash bucket fills into one page */ void *incomplete; int i, ret = 0; + u8 pos; atd = nla_nest_start(skb, IPSET_ATTR_ADT); if (!atd) @@ -1381,7 +1394,8 @@ mtype_list(const struct ip_set *set, cb->args[IPSET_CB_ARG0], t, n); if (!n) continue; - for (i = 0; i < n->pos; i++) { + pos = smp_load_acquire(&n->pos); + for (i = 0; i < pos; i++) { if (!test_bit(i, n->used)) continue; e = ahash_data(n, i, set->dsize); -- cgit v1.2.3 From b2870fc21601db9133bc70c48c603b487614fa3b Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Thu, 14 May 2026 16:46:38 +0200 Subject: netfilter: br_netfilter: Reallocate headroom if necessary in neigh_hh_bridge() neigh_hh_bridge() assumes the skb always has sufficient headroom to copy the aligned L2 header. This assumption can trigger the crash reported below using the following netfilter setup: $modprobe br_netfilter $sysctl -w net.bridge.bridge-nf-call-iptables=1 $root@OpenWrt:~# nft list ruleset table ip nat { chain prerouting { type nat hook prerouting priority dstnat; policy accept; ip daddr 192.168.83.123 dnat to 192.168.83.120 } } - iperf3 client (192.168.83.119) --> bridge (192.168.83.118) --> iperf3 server (192.168.83.120) the iperf3 client is sending packet for 192.168.83.123 to the bridge device. [ 1579.036575] Unable to handle kernel write to read-only memory at virtual address ffffff8004d76ffe [ 1579.045482] Mem abort info: [ 1579.048273] ESR = 0x000000009600004f [ 1579.052024] EC = 0x25: DABT (current EL), IL = 32 bits [ 1579.057363] SET = 0, FnV = 0 [ 1579.060417] EA = 0, S1PTW = 0 [ 1579.063550] FSC = 0x0f: level 3 permission fault [ 1579.068345] Data abort info: [ 1579.071224] ISV = 0, ISS = 0x0000004f, ISS2 = 0x00000000 [ 1579.076720] CM = 0, WnR = 1, TnD = 0, TagAccess = 0 [ 1579.081770] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1579.087092] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000080dc4000 [ 1579.093794] [ffffff8004d76ffe] pgd=180000009ffff003, p4d=180000009ffff003, pud=180000009ffff003, pmd=180000009ffe3003, pte=0060000084d76787 [ 1579.106343] Internal error: Oops: 000000009600004f [#1] SMP [ 1579.193824] CPU: 0 UID: 0 PID: 235 Comm: napi/qdma_eth-3 Tainted: G O 6.12.57 #0 [ 1579.202614] Tainted: [O]=OOT_MODULE [ 1579.206102] Hardware name: Airoha AN7581 Evaluation Board (DT) [ 1579.211929] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1579.218889] pc : br_nf_pre_routing_finish_bridge+0x1ac/0xcc8 [br_netfilter] [ 1579.225859] lr : br_nf_pre_routing_finish_bridge+0x18c/0xcc8 [br_netfilter] [ 1579.232822] sp : ffffffc0817cba20 [ 1579.236128] x29: ffffffc0817cba20 x28: 0000000000000000 x27: ffffff8002b89000 [ 1579.243273] x26: ffffff8004d7700e x25: 0000000000000008 x24: 0000000000000000 [ 1579.250416] x23: ffffffc08179d4c0 x22: 0000000000000000 x21: ffffffc08179d4c0 [ 1579.257561] x20: ffffff8004d9b800 x19: ffffff8015010000 x18: 0000000000000014 [ 1579.264704] x17: ffffffbf9e930000 x16: ffffffc0817c8000 x15: 0000000000000070 [ 1579.271848] x14: 0000000000000080 x13: 0000000000000001 x12: 0000000000000000 [ 1579.278993] x11: ffffffc0798caae0 x10: ffffff8014db6fd8 x9 : 0000000000000000 [ 1579.286136] x8 : 0000000000000003 x7 : ffffffc08171f628 x6 : 000000001a3b83d3 [ 1579.293281] x5 : 0000000000000000 x4 : 1beb76f22fee0000 x3 : ffffff8004d7700e [ 1579.300425] x2 : 0000000000000000 x1 : ffffff8004d9b8bc x0 : ffffff80026ed000 [ 1579.307570] Call trace: [ 1579.310018] br_nf_pre_routing_finish_bridge+0x1ac/0xcc8 [br_netfilter] [ 1579.316632] br_nf_hook_thresh+0xd4/0x14bc [br_netfilter] [ 1579.322032] br_nf_hook_thresh+0x250/0x14bc [br_netfilter] [ 1579.327517] br_nf_hook_thresh+0x76c/0x14bc [br_netfilter] [ 1579.333003] br_handle_frame+0x180/0x480 [ 1579.336935] __netif_receive_skb_core.constprop.0+0x540/0xf40 [ 1579.342682] __netif_receive_skb_one_core+0x28/0x50 [ 1579.347561] process_backlog+0x98/0x1e0 [ 1579.351398] __napi_poll+0x34/0x1c4 [ 1579.354887] net_rx_action+0x178/0x330 [ 1579.358638] handle_softirqs+0x108/0x2d4 [ 1579.362560] __do_softirq+0x10/0x18 [ 1579.366051] ____do_softirq+0xc/0x20 [ 1579.369627] call_on_irq_stack+0x30/0x4c [ 1579.373550] do_softirq_own_stack+0x18/0x20 [ 1579.377734] do_softirq+0x4c/0x60 [ 1579.381050] __local_bh_enable_ip+0x88/0x98 [ 1579.385234] napi_threaded_poll_loop+0x188/0x21c [ 1579.389853] napi_threaded_poll+0x70/0x80 [ 1579.393863] kthread+0xd8/0xdc [ 1579.396918] ret_from_fork+0x10/0x20 [ 1579.400499] Code: 88dffc22 3707ffc2 f9406663 f9406684 (f81f0064) [ 1579.406589] ---[ end trace 0000000000000000 ]--- [ 1579.411209] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 1579.418083] SMP: stopping secondary CPUs [ 1579.422012] Kernel Offset: disabled Fix the issue reallocating the skb headroom if necessary in neigh_hh_bridge routine. Fixes: e179e6322ac33 ("netfilter: bridge-netfilter: Fix MAC header handling with IP DNAT") Reviewed-by: Ido Schimmel Signed-off-by: Lorenzo Bianconi Signed-off-by: Pablo Neira Ayuso --- include/net/neighbour.h | 8 ++++++-- net/bridge/br_netfilter_hooks.c | 6 +++++- 2 files changed, 11 insertions(+), 3 deletions(-) diff --git a/include/net/neighbour.h b/include/net/neighbour.h index 2dfee6d4258a..8860cc2175fc 100644 --- a/include/net/neighbour.h +++ b/include/net/neighbour.h @@ -489,11 +489,15 @@ static inline int neigh_event_send(struct neighbour *neigh, struct sk_buff *skb) #if IS_ENABLED(CONFIG_BRIDGE_NETFILTER) static inline int neigh_hh_bridge(struct hh_cache *hh, struct sk_buff *skb) { - unsigned int seq, hh_alen; + unsigned int seq, hh_alen = HH_DATA_ALIGN(ETH_HLEN); + int err; + + err = skb_cow_head(skb, hh_alen); + if (err) + return err; do { seq = read_seqbegin(&hh->hh_lock); - hh_alen = HH_DATA_ALIGN(ETH_HLEN); memcpy(skb->data - hh_alen, hh->hh_data, ETH_ALEN + hh_alen - ETH_HLEN); } while (read_seqretry(&hh->hh_lock, seq)); return 0; diff --git a/net/bridge/br_netfilter_hooks.c b/net/bridge/br_netfilter_hooks.c index 0ab1c94db4b9..0a394e5f4391 100644 --- a/net/bridge/br_netfilter_hooks.c +++ b/net/bridge/br_netfilter_hooks.c @@ -297,7 +297,11 @@ int br_nf_pre_routing_finish_bridge(struct net *net, struct sock *sk, struct sk_ goto free_skb; } - neigh_hh_bridge(&neigh->hh, skb); + if (neigh_hh_bridge(&neigh->hh, skb)) { + neigh_release(neigh); + goto free_skb; + } + skb->dev = br_indev; ret = br_handle_frame_finish(net, sk, skb); -- cgit v1.2.3 From e196115ec330a18de415bdb9f5071aa9f08e53ce Mon Sep 17 00:00:00 2001 From: Haoze Xie Date: Fri, 15 May 2026 11:19:02 +0800 Subject: netfilter: nf_queue: hold bridge skb->dev while queued br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge master before queueing bridge LOCAL_IN packets. NFQUEUE only holds references on state.in/out and bridge physdevs, so a queued bridge packet can retain a freed bridge master in skb->dev until reinjection. When the verdict is reinjected later, br_netif_receive_skb() re-enters the receive path with skb->dev still pointing at the freed bridge master, triggering a use-after-free. Store skb->dev in the queue entry, hold a reference on it for the queue lifetime, and use the saved device when dropping queued packets during NETDEV_DOWN handling. Fixes: ac2863445686 ("netfilter: bridge: add nf_afinfo to enable queuing to userspace") Cc: stable@kernel.org Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Signed-off-by: Haoze Xie Signed-off-by: Ren Wei Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_queue.h | 1 + net/netfilter/nf_queue.c | 4 +++- net/netfilter/nfnetlink_queue.c | 2 ++ 3 files changed, 6 insertions(+), 1 deletion(-) diff --git a/include/net/netfilter/nf_queue.h b/include/net/netfilter/nf_queue.h index d17035d14d96..3978c3174cdb 100644 --- a/include/net/netfilter/nf_queue.h +++ b/include/net/netfilter/nf_queue.h @@ -14,6 +14,7 @@ struct nf_queue_entry { struct list_head list; struct rhash_head hash_node; struct sk_buff *skb; + struct net_device *skb_dev; unsigned int id; unsigned int hook_index; /* index in hook_entries->hook[] */ #if IS_ENABLED(CONFIG_BRIDGE_NETFILTER) diff --git a/net/netfilter/nf_queue.c b/net/netfilter/nf_queue.c index a6c81c04b3a5..57b450024a99 100644 --- a/net/netfilter/nf_queue.c +++ b/net/netfilter/nf_queue.c @@ -61,6 +61,7 @@ static void nf_queue_entry_release_refs(struct nf_queue_entry *entry) struct nf_hook_state *state = &entry->state; /* Release those devices we held, or Alexey will kill me. */ + dev_put(entry->skb_dev); dev_put(state->in); dev_put(state->out); if (state->sk) @@ -102,6 +103,7 @@ bool nf_queue_entry_get_refs(struct nf_queue_entry *entry) if (state->sk && !refcount_inc_not_zero(&state->sk->sk_refcnt)) return false; + dev_hold(entry->skb_dev); dev_hold(state->in); dev_hold(state->out); @@ -202,11 +204,11 @@ static int __nf_queue(struct sk_buff *skb, const struct nf_hook_state *state, *entry = (struct nf_queue_entry) { .skb = skb, + .skb_dev = skb->dev, .state = *state, .hook_index = index, .size = sizeof(*entry) + route_key_size, }; - __nf_queue_entry_init_physdevs(entry); if (!nf_queue_entry_get_refs(entry)) { diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index 58304fd1f70f..984a0eb9e149 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -1212,6 +1212,8 @@ dev_cmp(struct nf_queue_entry *entry, unsigned long ifindex) if (physinif == ifindex || physoutif == ifindex) return 1; #endif + if (entry->skb_dev && entry->skb_dev->ifindex == ifindex) + return 1; if (entry->state.in) if (entry->state.in->ifindex == ifindex) return 1; -- cgit v1.2.3 From 76824d2467feb1828b745d6add2541918d7be3da Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 16 May 2026 14:53:45 +0300 Subject: drm/msm/snapshot: fix dumping of the unaligned regions The snapshotting code internally aligns data segment to 16 bytes. This works fine for DPU code (where most of the regions are aligned), but fails for snapshotting of the DSI data (because DSI data region is shifted by 4 bytes). Fix the code by removing length alignment and by accurately printing last registers in the region. While reworking the code also fix the 16x memory overallocation in msm_disp_state_dump_regs(). Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot") Reported-by: Salendarsingh Gaud Signed-off-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/725449/ Message-ID: <20260516-msm-fix-dsi-dump-2-v2-1-9e49fb2d240e@oss.qualcomm.com> Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c | 24 +++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c b/drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c index 636bcb65a2a4..01a7019f5d67 100644 --- a/drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c +++ b/drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c @@ -9,7 +9,7 @@ #include "msm_disp_snapshot.h" -static void msm_disp_state_dump_regs(u32 **reg, u32 aligned_len, void __iomem *base_addr) +static void msm_disp_state_dump_regs(u32 **reg, u32 len, void __iomem *base_addr) { u32 len_padded; u32 num_rows; @@ -19,11 +19,11 @@ static void msm_disp_state_dump_regs(u32 **reg, u32 aligned_len, void __iomem *b void __iomem *end_addr; int i; - len_padded = aligned_len * REG_DUMP_ALIGN; - num_rows = aligned_len / REG_DUMP_ALIGN; + len_padded = round_up(len, REG_DUMP_ALIGN); + num_rows = DIV_ROUND_UP(len, REG_DUMP_ALIGN); addr = base_addr; - end_addr = base_addr + aligned_len; + end_addr = base_addr + len; *reg = kvzalloc(len_padded, GFP_KERNEL); if (!*reg) @@ -48,8 +48,8 @@ static void msm_disp_state_dump_regs(u32 **reg, u32 aligned_len, void __iomem *b static void msm_disp_state_print_regs(const u32 *dump_addr, u32 len, void __iomem *base_addr, struct drm_printer *p) { + void __iomem *addr, *end_addr; int i; - void __iomem *addr; u32 num_rows; if (!dump_addr) { @@ -58,6 +58,7 @@ static void msm_disp_state_print_regs(const u32 *dump_addr, u32 len, } addr = base_addr; + end_addr = base_addr + len; num_rows = len / REG_DUMP_ALIGN; for (i = 0; i < num_rows; i++) { @@ -67,6 +68,17 @@ static void msm_disp_state_print_regs(const u32 *dump_addr, u32 len, dump_addr[i * 4 + 2], dump_addr[i * 4 + 3]); addr += REG_DUMP_ALIGN; } + + if (addr != end_addr) { + drm_printf(p, "0x%lx : %08x", + (unsigned long)(addr - base_addr), + dump_addr[i * 4]); + if (addr + 0x4 < end_addr) + drm_printf(p, " %08x", dump_addr[i * 4 + 1]); + if (addr + 0x8 < end_addr) + drm_printf(p, " %08x", dump_addr[i * 4 + 2]); + drm_printf(p, "\n"); + } } void msm_disp_state_print(struct msm_disp_state *state, struct drm_printer *p) @@ -185,7 +197,7 @@ void msm_disp_snapshot_add_block(struct msm_disp_state *disp_state, u32 len, va_end(va); INIT_LIST_HEAD(&new_blk->node); - new_blk->size = ALIGN(len, REG_DUMP_ALIGN); + new_blk->size = len; new_blk->base_addr = base_addr; msm_disp_state_dump_regs(&new_blk->state, new_blk->size, base_addr); -- cgit v1.2.3 From 93d93f5f8da791e98159795c6ef683f45bd95d13 Mon Sep 17 00:00:00 2001 From: Heechan Kang Date: Sun, 17 May 2026 03:47:09 +0900 Subject: io_uring/waitid: clear waitid info before copying it to userspace IORING_OP_WAITID stores its result fields in struct io_waitid::info and later copies them to userspace siginfo. The prep path initializes the request arguments, but it does not initialize info itself. If the wait operation completes without reporting a child event, the common wait code can return without writing wo_info. In that case io_waitid_finish() still copies iw->info to userspace, exposing stale bytes from the reused io_kiocb command storage. Clear the result storage during prep so the io_uring path matches the regular waitid syscall, which uses a zero-initialized struct waitid_info. Fixes: f31ecf671ddc ("io_uring: add IORING_OP_WAITID support") Cc: stable@vger.kernel.org # 6.7+ Signed-off-by: Heechan Kang Link: https://patch.msgid.link/20260516184709.852814-1-gganji11@naver.com Signed-off-by: Jens Axboe --- io_uring/waitid.c | 1 + 1 file changed, 1 insertion(+) diff --git a/io_uring/waitid.c b/io_uring/waitid.c index d25d60aed6af..32f68fd7fcdd 100644 --- a/io_uring/waitid.c +++ b/io_uring/waitid.c @@ -275,6 +275,7 @@ int io_waitid_prep(struct io_kiocb *req, const struct io_uring_sqe *sqe) iw->options = READ_ONCE(sqe->file_index); iw->head = NULL; iw->infop = u64_to_user_ptr(READ_ONCE(sqe->addr2)); + memset(&iw->info, 0, sizeof(iw->info)); return 0; } -- cgit v1.2.3 From 0039ac8305064e455f04d412ec3896c4fe41d04f Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 16 May 2026 22:10:08 +0200 Subject: batman-adv: fix batadv_skb_is_frag() kernel-doc The kernel-doc comment for batadv_skb_is_frag() contained two errors: * the function description referred to "gain a unicast packet" instead of "contains unicast fragment". * the Return section omitted "merged" from "newly skb", leaving the description grammatically incorrect and inconsistent with the function description. Fixes: bc62216dc8e2 ("batman-adv: frag: disallow unicast fragment in fragment") Signed-off-by: Sven Eckelmann --- net/batman-adv/fragmentation.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/fragmentation.c b/net/batman-adv/fragmentation.c index 4a594aa2ebf6..e9553db42349 100644 --- a/net/batman-adv/fragmentation.c +++ b/net/batman-adv/fragmentation.c @@ -305,10 +305,10 @@ free: } /** - * batadv_skb_is_frag() - check if newly merged skb is gain a unicast packet + * batadv_skb_is_frag() - check if newly merged skb contains unicast fragment * @skb: newly merged skb * - * Return: if newly skb is of type BATADV_UNICAST_FRAG + * Return: if newly merged skb is of type BATADV_UNICAST_FRAG */ static bool batadv_skb_is_frag(struct sk_buff *skb) { -- cgit v1.2.3 From 92cee08dc4f00e77fd1317e4343c5d458b0abab7 Mon Sep 17 00:00:00 2001 From: Cole Leavitt Date: Sat, 4 Apr 2026 22:41:44 -0700 Subject: wifi: iwlwifi: mld: fix TSO segmentation explosion when AMSDU is disabled When the TLC notification disables AMSDU for a TID, the MLD driver sets max_tid_amsdu_len to the sentinel value 1. The TSO segmentation path in iwl_mld_tx_tso_segment() checks for zero but not for this sentinel, allowing it to reach the num_subframes calculation: num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad) = (1 + 2) / (1534 + 2) = 0 This zero propagates to iwl_tx_tso_segment() which sets: gso_size = num_subframes * mss = 0 Calling skb_gso_segment() with gso_size=0 creates over 32000 tiny segments from a single GSO skb. This floods the TX ring with ~1024 micro-frames (the rest are purged), creating a massive burst of TX completion events that can lead to memory corruption and a subsequent use-after-free in TCP's retransmit queue (refcount underflow in tcp_shifted_skb, NULL deref in tcp_rack_detect_loss). The MVM driver is immune because it checks mvmsta->amsdu_enabled before reaching the num_subframes calculation. The MLD driver has no equivalent bitmap check and relies solely on max_tid_amsdu_len, which does not catch the sentinel value. Fix this by detecting the sentinel value (max_tid_amsdu_len == 1) at the existing check and falling back to non-AMSDU TSO segmentation. Also add a WARN_ON_ONCE guard after the num_subframes division as defense-in-depth to catch any future code paths that produce zero through a different mechanism. Suggested-by: Miriam Rachel Korenblit Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver") Signed-off-by: Cole Leavitt Link: https://patch.msgid.link/20260405054145.1064152-3-cole@unwrap.rs Signed-off-by: Miri Korenblit --- drivers/net/wireless/intel/iwlwifi/mld/tx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mld/tx.c b/drivers/net/wireless/intel/iwlwifi/mld/tx.c index 546d09a38dab..094a28f75559 100644 --- a/drivers/net/wireless/intel/iwlwifi/mld/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mld/tx.c @@ -834,7 +834,7 @@ static int iwl_mld_tx_tso_segment(struct iwl_mld *mld, struct sk_buff *skb, return -EINVAL; max_tid_amsdu_len = sta->cur->max_tid_amsdu_len[tid]; - if (!max_tid_amsdu_len) + if (!max_tid_amsdu_len || max_tid_amsdu_len == 1) return iwl_tx_tso_segment(skb, 1, netdev_flags, mpdus_skbs); /* Sub frame header + SNAP + IP header + TCP header + MSS */ @@ -846,6 +846,9 @@ static int iwl_mld_tx_tso_segment(struct iwl_mld *mld, struct sk_buff *skb, */ num_subframes = (max_tid_amsdu_len + pad) / (subf_len + pad); + if (WARN_ON_ONCE(!num_subframes)) + return iwl_tx_tso_segment(skb, 1, netdev_flags, mpdus_skbs); + if (sta->max_amsdu_subframes && num_subframes > sta->max_amsdu_subframes) num_subframes = sta->max_amsdu_subframes; -- cgit v1.2.3 From 2becb38a3e217ef2b2f42fddd7db7a25905ec291 Mon Sep 17 00:00:00 2001 From: Sheroz Juraev Date: Sun, 15 Mar 2026 13:12:21 +0500 Subject: wifi: iwlwifi: mld: stop TX during firmware restart When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart to true. However, iwl_mld_tx_from_txq() does not check this flag before dequeuing frames from mac80211 and pushing them to the transport layer. Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame, which then gets freed immediately. Under high-throughput conditions (e.g., Tailscale UDP traffic or active SSH sessions), this creates a tight dequeue-send-fail-free loop that wastes CPU cycles and generates rapid skb allocation churn, leading to memory pressure from slab fragmentation. The RX path already has this guard (iwl_mld_rx_mpdu checks in_hw_restart at rx.c:1906), and so does the TXQ allocation worker (iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to iwl_mld_tx_from_txq() to stop all TX during firmware restart. Frames left in mac80211's TXQs are naturally drained after restart completes, when queue reallocation triggers iwl_mld_tx_from_txq() via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes wake_tx_queue. Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on kernel 6.19.5 where the firmware crashes approximately every 10-15 minutes under Tailscale traffic. Fixes: d1e879ec600f ("wifi: iwlwifi: add iwlmld sub-driver") Cc: stable@vger.kernel.org Signed-off-by: Sheroz Juraev Link: https://patch.msgid.link/20260315081221.2678478-1-goodmartiandev@gmail.com Signed-off-by: Miri Korenblit --- drivers/net/wireless/intel/iwlwifi/mld/tx.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mld/tx.c b/drivers/net/wireless/intel/iwlwifi/mld/tx.c index 094a28f75559..0bcb1ae69468 100644 --- a/drivers/net/wireless/intel/iwlwifi/mld/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mld/tx.c @@ -973,6 +973,16 @@ void iwl_mld_tx_from_txq(struct iwl_mld *mld, struct ieee80211_txq *txq) struct sk_buff *skb = NULL; u8 zero_addr[ETH_ALEN] = {}; + /* + * Don't transmit during firmware restart. The firmware is dead, + * so iwl_trans_tx() would return -EIO for each frame. Avoid the + * overhead of dequeuing from mac80211 only to immediately free + * the skbs, and the potential memory pressure from rapid skb + * allocation churn during high-throughput restart scenarios. + */ + if (unlikely(mld->fw_status.in_hw_restart)) + return; + /* * No need for threads to be pending here, they can leave the first * taker all the work. -- cgit v1.2.3 From d733ed481fd20a8e7bfe5119c4e77761ba3f87ee Mon Sep 17 00:00:00 2001 From: Miri Korenblit Date: Fri, 15 May 2026 15:14:56 +0300 Subject: wifi: iwlwifi: mld: don't dereference a pointer before NULL checking it In iwl_mld_remove_link, the link->fw_id is saved at the beginning of the function so we have it after we freed the link. But the link pointer can be NULL, and is not checked when the fw_id is stored. Fix it by simply freeing the link at the end of the function. fFixes: 0e66a39f4f0e ("wifi: iwlwifi: fix potential use after free in iwl_mld_remove_link()") Reviewed-by: Johannes Berg Link: https://patch.msgid.link/20260515151351.371f40fc6711.I6a82cfe9655564e9c5731af91c36493b26b1208e@changeid Signed-off-by: Miri Korenblit --- drivers/net/wireless/intel/iwlwifi/mld/link.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mld/link.c b/drivers/net/wireless/intel/iwlwifi/mld/link.c index b66e84d2365f..be2cdf43c72e 100644 --- a/drivers/net/wireless/intel/iwlwifi/mld/link.c +++ b/drivers/net/wireless/intel/iwlwifi/mld/link.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* - * Copyright (C) 2024-2025 Intel Corporation + * Copyright (C) 2024-2026 Intel Corporation */ #include "constants.h" @@ -504,7 +504,6 @@ void iwl_mld_remove_link(struct iwl_mld *mld, struct iwl_mld_vif *mld_vif = iwl_mld_vif_from_mac80211(bss_conf->vif); struct iwl_mld_link *link = iwl_mld_link_from_mac80211(bss_conf); bool is_deflink = link == &mld_vif->deflink; - u8 fw_id = link->fw_id; if (WARN_ON(!link || link->active)) return; @@ -512,15 +511,15 @@ void iwl_mld_remove_link(struct iwl_mld *mld, iwl_mld_rm_link_from_fw(mld, bss_conf); /* Continue cleanup on failure */ - if (!is_deflink) - kfree_rcu(link, rcu_head); - RCU_INIT_POINTER(mld_vif->link[bss_conf->link_id], NULL); - if (WARN_ON(fw_id >= mld->fw->ucode_capa.num_links)) + if (WARN_ON(link->fw_id >= mld->fw->ucode_capa.num_links)) return; - RCU_INIT_POINTER(mld->fw_id_to_bss_conf[fw_id], NULL); + RCU_INIT_POINTER(mld->fw_id_to_bss_conf[link->fw_id], NULL); + + if (!is_deflink) + kfree_rcu(link, rcu_head); } void iwl_mld_handle_missed_beacon_notif(struct iwl_mld *mld, -- cgit v1.2.3 From fb84b5cbcaab3ca0f4e961d92a40ed7f3aac483b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 May 2026 15:14:57 +0300 Subject: wifi: iwlwifi: mvm: fix driver-set TX rates on old devices On old devices such as 7265D, rates are still encoded in version 1 format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.) While introducing v3 rates, I changed the driver from internally handling v1 rates and converting to v2, to internally handling v3 and converting to v1 or v2 according to the firmware. I accordingly changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer have different values for different APIs. This was correct. However, I later reverted this part of the change, because it was reported that I had broken beacon rates, causing a FW assert/crash. This caused TX_CMD rates to be set incorrectly, potentially causing a warning when reported back from the device as having been used. Fix this (hopefully correctly now) by handling beacon rates in the TX_CMD that's embedded in the beacon template command separately. Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate index, not PLCP value, fixing the real TX_CMD. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Link: https://patch.msgid.link/20260515151351.7407e293dff7.I4ea1a17f8fe99c933d3f3e30d077cf4246125c3e@changeid Signed-off-by: Miri Korenblit --- drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 27 +++++++++++++++-------- drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 14 ++++-------- 2 files changed, 22 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c index c523c5e82d4a..8ffa72aca3cf 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* - * Copyright (C) 2012-2014, 2018-2025 Intel Corporation + * Copyright (C) 2012-2014, 2018-2026 Intel Corporation * Copyright (C) 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015-2017 Intel Deutschland GmbH */ @@ -927,13 +927,18 @@ u8 iwl_mvm_mac_ctxt_get_lowest_rate(struct iwl_mvm *mvm, u16 iwl_mvm_mac_ctxt_get_beacon_flags(const struct iwl_fw *fw, u8 rate_idx) { - u16 flags = iwl_mvm_mac80211_idx_to_hwrate(fw, rate_idx); bool is_new_rate = iwl_fw_lookup_cmd_ver(fw, BEACON_TEMPLATE_CMD, 0) > 10; + u16 flags = 0; if (rate_idx <= IWL_LAST_CCK_RATE) flags |= is_new_rate ? IWL_MAC_BEACON_CCK : IWL_MAC_BEACON_CCK_V1; + if (iwl_fw_lookup_cmd_ver(fw, TX_CMD, 0) > 8) + flags |= iwl_mvm_mac80211_idx_to_hwrate(fw, rate_idx); + else + flags |= iwl_fw_rate_idx_to_plcp(rate_idx); + return flags; } @@ -962,6 +967,7 @@ static void iwl_mvm_mac_ctxt_set_tx(struct iwl_mvm *mvm, { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); struct ieee80211_tx_info *info; + u32 rate_n_flags = 0; u8 rate; u32 tx_flags; @@ -981,18 +987,21 @@ static void iwl_mvm_mac_ctxt_set_tx(struct iwl_mvm *mvm, IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION)) { iwl_mvm_toggle_tx_ant(mvm, &mvm->mgmt_last_antenna_idx); - tx_params->rate_n_flags = - cpu_to_le32(BIT(mvm->mgmt_last_antenna_idx) << - RATE_MCS_ANT_POS); + rate_n_flags |= BIT(mvm->mgmt_last_antenna_idx) << + RATE_MCS_ANT_POS; } rate = iwl_mvm_mac_ctxt_get_beacon_rate(mvm, info, vif); - tx_params->rate_n_flags |= - cpu_to_le32(iwl_mvm_mac80211_idx_to_hwrate(mvm->fw, rate)); - if (rate == IWL_FIRST_CCK_RATE) - tx_params->rate_n_flags |= cpu_to_le32(RATE_MCS_CCK_MSK_V1); + if (rate < IWL_FIRST_OFDM_RATE) + rate_n_flags |= RATE_MCS_MOD_TYPE_CCK; + else + rate_n_flags |= RATE_MCS_MOD_TYPE_LEGACY_OFDM; + + rate_n_flags |= iwl_mvm_mac80211_idx_to_hwrate(mvm->fw, rate); + tx_params->rate_n_flags = iwl_mvm_v3_rate_to_fw(rate_n_flags, + mvm->fw_rates_ver); } int iwl_mvm_mac_ctxt_send_beacon_cmd(struct iwl_mvm *mvm, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c index 4a33a032c2a7..f052537e9567 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* - * Copyright (C) 2012-2014, 2018-2025 Intel Corporation + * Copyright (C) 2012-2014, 2018-2026 Intel Corporation * Copyright (C) 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015-2017 Intel Deutschland GmbH */ @@ -159,15 +159,9 @@ int iwl_mvm_legacy_rate_to_mac80211_idx(u32 rate_n_flags, u8 iwl_mvm_mac80211_idx_to_hwrate(const struct iwl_fw *fw, int rate_idx) { - if (iwl_fw_lookup_cmd_ver(fw, TX_CMD, 0) > 8) - /* In the new rate legacy rates are indexed: - * 0 - 3 for CCK and 0 - 7 for OFDM. - */ - return (rate_idx >= IWL_FIRST_OFDM_RATE ? - rate_idx - IWL_FIRST_OFDM_RATE : - rate_idx); - - return iwl_fw_rate_idx_to_plcp(rate_idx); + return rate_idx >= IWL_FIRST_OFDM_RATE ? + rate_idx - IWL_FIRST_OFDM_RATE : + rate_idx; } u8 iwl_mvm_mac80211_ac_to_ucode_ac(enum ieee80211_ac_numbers ac) -- cgit v1.2.3 From 25e416f148f3f948638ca7c6ff63fd842d9c07ad Mon Sep 17 00:00:00 2001 From: Moriya Itzchaki Date: Fri, 15 May 2026 15:14:58 +0300 Subject: wifi: iwlwifi: use correct function to read STEP_URM register CNVI_PMU_STEP_FLOW is a PRPH register, not a UMAC PRPH register. Use iwl_read_prph() instead of iwl_read_umac_prph() to read it correctly. Signed-off-by: Moriya Itzchaki Reviewed-by: Johannes Berg Link: https://patch.msgid.link/20260515151352.3a69fa2dbda7.I8d96635a9c06a835b05a10b6d66c8a9299676246@changeid Signed-off-by: Miri Korenblit --- drivers/net/wireless/intel/iwlwifi/pcie/gen1_2/trans-gen2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/gen1_2/trans-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/gen1_2/trans-gen2.c index a50e845cea42..64262bcca55d 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/gen1_2/trans-gen2.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/gen1_2/trans-gen2.c @@ -398,9 +398,9 @@ void iwl_trans_pcie_gen2_fw_alive(struct iwl_trans *trans) mutex_unlock(&trans_pcie->mutex); if (trans->mac_cfg->device_family >= IWL_DEVICE_FAMILY_BZ) - trans->step_urm = !!(iwl_read_umac_prph(trans, - CNVI_PMU_STEP_FLOW) & - CNVI_PMU_STEP_FLOW_FORCE_URM); + trans->step_urm = !!(iwl_read_prph(trans, + CNVI_PMU_STEP_FLOW) & + CNVI_PMU_STEP_FLOW_FORCE_URM); } static bool iwl_pcie_set_ltr(struct iwl_trans *trans) -- cgit v1.2.3 From b753b3334bad7c4735b6e5face0c331d4be11dda Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 15 May 2026 15:14:59 +0300 Subject: wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o BSS vif Clearly, from a user perspective, it must be valid to configure WoWLAN (which can include network detection) and then suspend while not connected to a network, or even without an interface at all (WoWLAN config is handled on a per-wiphy basis). Since mac80211 doesn't distinguish these cases and simply calls the driver to suspend whenever WoWLAN is configured, the driver has to cleanly handle the case where it's called for WoWLAN but no (BSS) interface exists. Remove the WARN_ON(), move the print so it doesn't get done in this case, and keep returning 1 to disconnect everything. Signed-off-by: Johannes Berg Link: https://patch.msgid.link/20260515151352.0c55d1135409.I54f8be0e2aa28cfb1cb1dcf3b2d2d8fe75b4397b@changeid Signed-off-by: Miri Korenblit --- drivers/net/wireless/intel/iwlwifi/mld/d3.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mld/d3.c b/drivers/net/wireless/intel/iwlwifi/mld/d3.c index ef98efc8fb1b..3a595a1c2e00 100644 --- a/drivers/net/wireless/intel/iwlwifi/mld/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mld/d3.c @@ -1930,12 +1930,12 @@ int iwl_mld_wowlan_suspend(struct iwl_mld *mld, struct cfg80211_wowlan *wowlan) if (WARN_ON(!wowlan)) return 1; - IWL_DEBUG_WOWLAN(mld, "Starting the wowlan suspend flow\n"); - bss_vif = iwl_mld_get_bss_vif(mld); - if (WARN_ON(!bss_vif)) + if (!bss_vif) return 1; + IWL_DEBUG_WOWLAN(mld, "Starting the wowlan suspend flow\n"); + if (!bss_vif->cfg.assoc) { int ret; /* If we're not associated, this must be netdetect */ -- cgit v1.2.3 From 734a4e051b9767f439137940095d63afbfed0745 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Fri, 15 May 2026 15:15:00 +0300 Subject: wifi: iwlwifi: mld: disconnect only after 6 beacons without Rx After 4 missed beacons since last Rx, the firmware will send an NDP to the AP. If the NDP is ACK'ed, it'll reset the missed_beacons_since_last_rx counter. Disconnecting after 4 beacons doesn't give enough time to the firmware to send the NDP. Wait until we get 6 missed beacons since last Rx before disconnecting. Signed-off-by: Emmanuel Grumbach Link: https://patch.msgid.link/20260515151352.c4ed0d849f98.Iefa2e8be9edfc74683997eea60bb53c2002f31f0@changeid Signed-off-by: Miri Korenblit --- drivers/net/wireless/intel/iwlwifi/mld/constants.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mld/constants.h b/drivers/net/wireless/intel/iwlwifi/mld/constants.h index e2a5eecc18c3..890abcab3837 100644 --- a/drivers/net/wireless/intel/iwlwifi/mld/constants.h +++ b/drivers/net/wireless/intel/iwlwifi/mld/constants.h @@ -1,11 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* - * Copyright (C) 2024-2025 Intel Corporation + * Copyright (C) 2024-2026 Intel Corporation */ #ifndef __iwl_mld_constants_h__ #define __iwl_mld_constants_h__ -#define IWL_MLD_MISSED_BEACONS_SINCE_RX_THOLD 4 +#define IWL_MLD_MISSED_BEACONS_SINCE_RX_THOLD 6 #define IWL_MLD_MISSED_BEACONS_THRESHOLD 8 #define IWL_MLD_MISSED_BEACONS_THRESHOLD_LONG 19 #define IWL_MLD_BCN_LOSS_EXIT_ESR_THRESH_2_LINKS 5 -- cgit v1.2.3 From db339b6bc9f234b4883eb02946ea01d8d9faa11c Mon Sep 17 00:00:00 2001 From: Lad Prabhakar Date: Tue, 28 Apr 2026 11:03:38 +0100 Subject: dt-bindings: display/msm: Fix typo in clock-names property Fix the typo "clocks-names" to "clock-names" in the allOf/if conditional blocks. Fixes: 9be5c47908e66 ("dt-bindings: display/msm: expand to support MST") Fixes: 7403e87c13847 ("dt-bindings: display: msm: Fix reg ranges and clocks on Glymur") Signed-off-by: Lad Prabhakar Reviewed-by: Krzysztof Kozlowski Patchwork: https://patchwork.freedesktop.org/patch/721682/ Message-ID: <20260428100338.3179722-1-prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Rob Clark --- .../devicetree/bindings/display/msm/dp-controller.yaml | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index b96e1ea40d3f..094a6383bb77 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -244,7 +244,7 @@ allOf: clocks: minItems: 5 maxItems: 5 - clocks-names: + clock-names: minItems: 5 maxItems: 5 @@ -265,7 +265,7 @@ allOf: clocks: minItems: 5 maxItems: 6 - clocks-names: + clock-names: minItems: 5 maxItems: 6 @@ -286,7 +286,7 @@ allOf: clocks: minItems: 6 maxItems: 6 - clocks-names: + clock-names: minItems: 6 maxItems: 6 @@ -324,7 +324,7 @@ allOf: clocks: minItems: 6 maxItems: 8 - clocks-names: + clock-names: minItems: 6 maxItems: 8 @@ -344,7 +344,7 @@ allOf: clocks: minItems: 5 maxItems: 6 - clocks-names: + clock-names: minItems: 5 maxItems: 6 -- cgit v1.2.3 From 3d562d35a044ae798cab421c65a116f8cedfa5d4 Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Sun, 17 May 2026 09:55:28 +0200 Subject: bpf: Check global subprog exception paths Global subprogs are verified independently and are not descended into when their callers are symbolically executed. This means a caller can hold references or locks across a global subprog call that may throw, while the verifier only checks the non-exceptional return path at the call site. Record whether a subprog might throw in the CFG summary pass, alongside the existing might_sleep and packet-data-changing summaries, and propagate that effect through reachable callees. When a global subprog is marked as possibly throwing, push the normal continuation and validate the exceptional path immediately at the call site, avoiding a synthetic exception state and associated special case in the pruning checks. Fixes: f18b03fabaa9 ("bpf: Implement BPF exceptions") Signed-off-by: Kumar Kartikeya Dwivedi Link: https://lore.kernel.org/r/20260517075530.3461166-2-memxor@gmail.com Signed-off-by: Alexei Starovoitov --- include/linux/bpf_verifier.h | 2 ++ kernel/bpf/cfg.c | 13 ++++++++++++- kernel/bpf/verifier.c | 23 +++++++++++++++++------ 3 files changed, 31 insertions(+), 7 deletions(-) diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index b148f816f25b..185b2aa43a42 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -729,6 +729,7 @@ struct bpf_subprog_info { */ s16 fastcall_stack_off; bool has_tail_call: 1; + bool might_throw: 1; bool tail_call_reachable: 1; bool has_ld_abs: 1; bool is_cb: 1; @@ -1308,6 +1309,7 @@ void bpf_fmt_stack_mask(char *buf, ssize_t buf_sz, u64 stack_mask); bool bpf_subprog_is_global(const struct bpf_verifier_env *env, int subprog); int bpf_find_subprog(struct bpf_verifier_env *env, int off); +bool bpf_is_throw_kfunc(struct bpf_insn *insn); int bpf_compute_const_regs(struct bpf_verifier_env *env); int bpf_prune_dead_branches(struct bpf_verifier_env *env); int bpf_check_cfg(struct bpf_verifier_env *env); diff --git a/kernel/bpf/cfg.c b/kernel/bpf/cfg.c index 998f42a8189a..26d37066465f 100644 --- a/kernel/bpf/cfg.c +++ b/kernel/bpf/cfg.c @@ -64,11 +64,19 @@ static void mark_subprog_might_sleep(struct bpf_verifier_env *env, int off) subprog->might_sleep = true; } +static void mark_subprog_might_throw(struct bpf_verifier_env *env, int off) +{ + struct bpf_subprog_info *subprog; + + subprog = bpf_find_containing_subprog(env, off); + subprog->might_throw = true; +} + /* 't' is an index of a call-site. * 'w' is a callee entry point. * Eventually this function would be called when env->cfg.insn_state[w] == EXPLORED. * Rely on DFS traversal order and absence of recursive calls to guarantee that - * callee's change_pkt_data marks would be correct at that moment. + * callee's effect marks would be correct at that moment. */ static void merge_callee_effects(struct bpf_verifier_env *env, int t, int w) { @@ -78,6 +86,7 @@ static void merge_callee_effects(struct bpf_verifier_env *env, int t, int w) callee = bpf_find_containing_subprog(env, w); caller->changes_pkt_data |= callee->changes_pkt_data; caller->might_sleep |= callee->might_sleep; + caller->might_throw |= callee->might_throw; } enum { @@ -509,6 +518,8 @@ static int visit_insn(int t, struct bpf_verifier_env *env) mark_subprog_might_sleep(env, t); if (ret == 0 && bpf_is_kfunc_pkt_changing(&meta)) mark_subprog_changes_pkt_data(env, t); + if (ret == 0 && bpf_is_throw_kfunc(insn)) + mark_subprog_might_throw(env, t); } return visit_func_call_insn(t, insns, env, insn->src_reg == BPF_PSEUDO_CALL); diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 88b40c979b56..7fb88e1cd7c4 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -442,7 +442,6 @@ static bool is_dynptr_ref_function(enum bpf_func_id func_id) static bool is_sync_callback_calling_kfunc(u32 btf_id); static bool is_async_callback_calling_kfunc(u32 btf_id); static bool is_callback_calling_kfunc(u32 btf_id); -static bool is_bpf_throw_kfunc(struct bpf_insn *insn); static bool is_bpf_wq_set_callback_kfunc(u32 btf_id); static bool is_task_work_add_kfunc(u32 func_id); @@ -5405,7 +5404,7 @@ continue_func: if (bpf_pseudo_kfunc_call(insn + i) && !insn[i].off) { bool err = false; - if (!is_bpf_throw_kfunc(insn + i)) + if (!bpf_is_throw_kfunc(insn + i)) continue; for (tmp = idx; tmp >= 0 && !err; tmp = dinfo[tmp].caller) { if (subprog[tmp].is_cb) { @@ -9499,6 +9498,9 @@ static int push_callback_call(struct bpf_verifier_env *env, struct bpf_insn *ins return 0; } +static int process_bpf_exit_full(struct bpf_verifier_env *env, + bool *do_print_state, bool exception_exit); + static int check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn, int *insn_idx) { @@ -9552,6 +9554,17 @@ static int check_func_call(struct bpf_verifier_env *env, struct bpf_insn *insn, caller->regs[BPF_REG_0].subreg_def = DEF_NOT_SUBREG; } + if (env->subprog_info[subprog].might_throw) { + struct bpf_verifier_state *branch; + + branch = push_stack(env, *insn_idx + 1, *insn_idx, false); + if (IS_ERR(branch)) { + verbose(env, "failed to push state for global subprog exception path\n"); + return PTR_ERR(branch); + } + return process_bpf_exit_full(env, NULL, true); + } + /* continue with next insn after call */ return 0; } @@ -11782,7 +11795,7 @@ static bool is_async_callback_calling_kfunc(u32 btf_id) is_task_work_add_kfunc(btf_id); } -static bool is_bpf_throw_kfunc(struct bpf_insn *insn) +bool bpf_is_throw_kfunc(struct bpf_insn *insn) { return bpf_pseudo_kfunc_call(insn) && insn->off == 0 && insn->imm == special_kfunc_list[KF_bpf_throw]; @@ -12972,8 +12985,6 @@ static int check_special_kfunc(struct bpf_verifier_env *env, struct bpf_kfunc_ca } static int check_return_code(struct bpf_verifier_env *env, int regno, const char *reg_name); -static int process_bpf_exit_full(struct bpf_verifier_env *env, - bool *do_print_state, bool exception_exit); static int check_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn, int *insn_idx_p) @@ -13354,7 +13365,7 @@ static int check_kfunc_call(struct bpf_verifier_env *env, struct bpf_insn *insn, if (meta.func_id == special_kfunc_list[KF_bpf_session_cookie]) env->prog->call_session_cookie = true; - if (is_bpf_throw_kfunc(insn)) + if (bpf_is_throw_kfunc(insn)) return process_bpf_exit_full(env, NULL, true); return 0; -- cgit v1.2.3 From 511a5db3c9ec55dd5393b8639000df080c296ef4 Mon Sep 17 00:00:00 2001 From: Kumar Kartikeya Dwivedi Date: Sun, 17 May 2026 09:55:29 +0200 Subject: selftests/bpf: Cover global subprog exception leaks Add a verifier failure case where the caller holds a reference across a global subprog call that may throw. The program must be rejected because the exceptional path would skip the caller's reference release. Signed-off-by: Kumar Kartikeya Dwivedi Link: https://lore.kernel.org/r/20260517075530.3461166-3-memxor@gmail.com Signed-off-by: Alexei Starovoitov --- .../testing/selftests/bpf/progs/exceptions_fail.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/tools/testing/selftests/bpf/progs/exceptions_fail.c b/tools/testing/selftests/bpf/progs/exceptions_fail.c index 051e2b6f2694..ac44d60e5066 100644 --- a/tools/testing/selftests/bpf/progs/exceptions_fail.c +++ b/tools/testing/selftests/bpf/progs/exceptions_fail.c @@ -208,6 +208,28 @@ int reject_with_reference(void *ctx) return 0; } +__noinline int global_subprog_may_throw(struct __sk_buff *ctx) +{ + if (ctx->len) + bpf_throw(0); + return 0; +} + +SEC("?tc") +__failure __msg("Unreleased reference") +int reject_global_subprog_throw_with_reference(struct __sk_buff *ctx) +{ + struct foo *f; + + f = bpf_obj_new(typeof(*f)); + if (!f) + return 0; + if (ctx->protocol) + global_subprog_may_throw(ctx); + bpf_obj_drop(f); + return 0; +} + __noinline static int subprog_ref(struct __sk_buff *ctx) { struct foo *f; -- cgit v1.2.3 From 515e3996a4c26e7f955c13b3b19522a2c8642af9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 17 May 2026 07:43:16 -1000 Subject: sched_ext: Fix deadlock between scx_root_disable() and concurrent forks scx_root_disable() enters SCX_DISABLING before it grabs scx_enable_mutex to clear __scx_switched_all and scx_switching_all. task_should_scx() short-circuits on DISABLING, so forks in that window land on fair while next_active_class() still skips fair - the new tasks stall. This can deadlock the disable path itself: scx_alloc_and_add_sched() runs under scx_enable_mutex and creates a helper kthread; if that new kthread is one of the stalled fair tasks, the mutex holder waits forever and scx_root_disable() can never make progress. Only sub-sched support exposes this, since sub-sched enables are the only path where scx_alloc_and_add_sched() can race the root's disable. Move the DISABLING check after @scx_switching_all. @scx_switching_all serves as a proxy for __scx_switched_all, so while it's set, forks keep going to scx. Once cleared, DISABLING applies normally. v2: Reword in-source comment and description. (Andrea) Fixes: 337ec00b1d9c ("sched_ext: Implement cgroup sub-sched enabling and disabling") Signed-off-by: Tejun Heo Reviewed-by: Andrea Righi --- kernel/sched/ext.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/kernel/sched/ext.c b/kernel/sched/ext.c index a6d0a93d8174..547ca398f646 100644 --- a/kernel/sched/ext.c +++ b/kernel/sched/ext.c @@ -4946,10 +4946,30 @@ static const struct kset_uevent_ops scx_uevent_ops = { */ bool task_should_scx(int policy) { - if (!scx_enabled() || unlikely(scx_enable_state() == SCX_DISABLING)) + /* if disabled, nothing should be on it */ + if (!scx_enabled()) return false; + + /* scx is taking over all SCHED_OTHER and SCHED_EXT tasks */ if (READ_ONCE(scx_switching_all)) return true; + + /* + * scx is tearing down - keep new SCHED_EXT tasks out. + * + * Must come after scx_switching_all test, which serves as a proxy + * for __scx_switched_all. While __scx_switched_all is set, we must + * return true via the branch above: a fork routed to fair would + * stall because next_active_class() skips fair. + * + * This can develop into a deadlock - scx holds scx_enable_mutex across + * kthread_create() in scx_alloc_and_add_sched(); if the new kthread is + * the stalled task, the disable path can never grab the mutex to clear + * scx_switching_all. + */ + if (unlikely(scx_enable_state() == SCX_DISABLING)) + return false; + return policy == SCHED_EXT; } -- cgit v1.2.3 From 653f17c742601004774e3f8fb79d387d5ae6103e Mon Sep 17 00:00:00 2001 From: Jiakai Xu Date: Wed, 15 Apr 2026 07:52:16 +0000 Subject: RISC-V: KVM: Fix invalid HVA warning in steal-time recording kvm_riscv_vcpu_record_steal_time() assumes that the steal-time shared memory GPA (vcpu->arch.sta.shmem) is always backed by a valid guest memory slot. However, this assumption is not guaranteed by the KVM userspace ABI. A malicious or buggy userspace can set the STA shared memory GPA via KVM_SET_ONE_REG without establishing a corresponding memory region via KVM_SET_USER_MEMORY_REGION. In such cases, the GPA cannot be translated to a valid HVA and kvm_vcpu_gfn_to_hva() returns an error address. The current implementation incorrectly treats this as a kernel warning using WARN_ON(), which may escalate to a kernel panic when panic_on_warn is enabled. This is not a kernel bug condition but a normal invalid configuration from userspace, and should be handled gracefully. Fix it by removing WARN_ON() and treating invalid HVA as a normal failure case, resetting the STA shared memory state. Fixes: e9f12b5fff8ad0 ("RISC-V: KVM: Implement SBI STA extension") Signed-off-by: Jiakai Xu Signed-off-by: Jiakai Xu Assisted-by: OpenClaw:DeepSeek-V3.2 Reviewed-by: Nutty Liu Reviewed-by: Andrew Jones Link: https://lore.kernel.org/r/20260415075216.2757427-1-xujiakai2025@iscas.ac.cn Signed-off-by: Anup Patel --- arch/riscv/kvm/vcpu_sbi_sta.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/kvm/vcpu_sbi_sta.c b/arch/riscv/kvm/vcpu_sbi_sta.c index 3b834709b429..60e50296a008 100644 --- a/arch/riscv/kvm/vcpu_sbi_sta.c +++ b/arch/riscv/kvm/vcpu_sbi_sta.c @@ -46,7 +46,7 @@ void kvm_riscv_vcpu_record_steal_time(struct kvm_vcpu *vcpu) gfn = shmem >> PAGE_SHIFT; hva = kvm_vcpu_gfn_to_hva(vcpu, gfn); - if (WARN_ON(kvm_is_error_hva(hva))) { + if (kvm_is_error_hva(hva)) { vcpu->arch.sta.shmem = INVALID_GPA; return; } -- cgit v1.2.3 From 0835ee26938e15eccd70f7d33da386b6490f9449 Mon Sep 17 00:00:00 2001 From: Osama Abdelkader Date: Thu, 14 May 2026 19:36:40 +0200 Subject: riscv: kvm: return SBI_ERR_FAILURE for pmu_snapshot_set_shmem() when OOM kvm_riscv_vcpu_pmu_snapshot_set_shmem() returned -ENOMEM from the SBI extension handler, which caused kvm_riscv_vcpu_sbi_ecall() to abort KVM_RUN and surface the error to userspace instead of ompleting the ECALL with a negative SBI error in a0. Use SBI_ERR_FAILURE and the normal retdata path, matching other PMU handlers and kvm_sbi_ext_pmu_handler comment. Fixes: c2f41ddbcdd7 ("RISC-V: KVM: Implement SBI PMU Snapshot feature") Cc: stable@vger.kernel.org Signed-off-by: Osama Abdelkader Reviewed-by: Anup Patel Link: https://lore.kernel.org/r/20260514173642.41448-1-osama.abdelkader@gmail.com Signed-off-by: Anup Patel --- arch/riscv/kvm/vcpu_pmu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/riscv/kvm/vcpu_pmu.c b/arch/riscv/kvm/vcpu_pmu.c index a935ed96bc17..91aa0155a420 100644 --- a/arch/riscv/kvm/vcpu_pmu.c +++ b/arch/riscv/kvm/vcpu_pmu.c @@ -453,8 +453,10 @@ int kvm_riscv_vcpu_pmu_snapshot_set_shmem(struct kvm_vcpu *vcpu, unsigned long s } kvpmu->sdata = kzalloc(snapshot_area_size, GFP_ATOMIC); - if (!kvpmu->sdata) - return -ENOMEM; + if (!kvpmu->sdata) { + sbiret = SBI_ERR_FAILURE; + goto out; + } /* No need to check writable slot explicitly as kvm_vcpu_write_guest does it internally */ if (kvm_vcpu_write_guest(vcpu, saddr, kvpmu->sdata, snapshot_area_size)) { -- cgit v1.2.3 From 0e9d0e7a7c78db7aa1c13796c65cfe0aefa54a5b Mon Sep 17 00:00:00 2001 From: Osama Abdelkader Date: Thu, 14 May 2026 19:36:41 +0200 Subject: riscv: kvm: return SBI_ERR_FAILURE for pmu_event_info() when OOM kvm_riscv_vcpu_pmu_event_info() returned -ENOMEM from the SBI extension handler, which caused kvm_riscv_vcpu_sbi_ecall() to abort KVM_RUN and surface the error to userspace instead of completing the ECALL with a negative SBI error in a0. Use SBI_ERR_FAILURE and the normal retdata path, matching other PMU handlers and kvm_sbi_ext_pmu_handler comment. Fixes: e309fd113b9f ("RISC-V: KVM: Implement get event info function") Cc: stable@vger.kernel.org Signed-off-by: Osama Abdelkader Reviewed-by: Anup Patel Link: https://lore.kernel.org/r/20260514173642.41448-2-osama.abdelkader@gmail.com Signed-off-by: Anup Patel --- arch/riscv/kvm/vcpu_pmu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/riscv/kvm/vcpu_pmu.c b/arch/riscv/kvm/vcpu_pmu.c index 91aa0155a420..bb46dcbfb24d 100644 --- a/arch/riscv/kvm/vcpu_pmu.c +++ b/arch/riscv/kvm/vcpu_pmu.c @@ -501,8 +501,10 @@ int kvm_riscv_vcpu_pmu_event_info(struct kvm_vcpu *vcpu, unsigned long saddr_low } einfo = kzalloc(shmem_size, GFP_KERNEL); - if (!einfo) - return -ENOMEM; + if (!einfo) { + ret = SBI_ERR_FAILURE; + goto out; + } ret = kvm_vcpu_read_guest(vcpu, shmem, einfo, shmem_size); if (ret) { -- cgit v1.2.3 From fdb69d401967fd88d27982a7e4984b2a3a4f0314 Mon Sep 17 00:00:00 2001 From: Jiakai Xu Date: Sun, 17 May 2026 12:44:14 +0000 Subject: RISC-V: KVM: Fix NULL pointer dereference in SBI v0.1 SEND_IPI handler The SBI v0.1 SEND_IPI handler iterates over the hart mask and calls kvm_get_vcpu_by_id() to find the target vcpu for each set bit. When a guest provides a hart mask containing bits for non-existent vcpu_ids, kvm_get_vcpu_by_id() returns NULL, which is then unconditionally dereferenced by kvm_riscv_vcpu_set_interrupt(), causing a kernel crash. Fix this by adding a NULL check before dereferencing the return value. If the target vcpu is not found, skip it and continue processing the remaining valid harts. Fixes: a046c2d8578c ("RISC-V: KVM: Reorganize SBI code by moving SBI v0.1 to its own file") Signed-off-by: Jiakai Xu Signed-off-by: Jiakai Xu Assisted-by: OpenClaw:DeepSeek-V3.2 Reviewed-by: Anup Patel Link: https://lore.kernel.org/r/20260517124414.420919-1-xujiakai2025@iscas.ac.cn Signed-off-by: Anup Patel --- arch/riscv/kvm/vcpu_sbi_v01.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/riscv/kvm/vcpu_sbi_v01.c b/arch/riscv/kvm/vcpu_sbi_v01.c index 188d5ea5b3b8..c9c323d4577a 100644 --- a/arch/riscv/kvm/vcpu_sbi_v01.c +++ b/arch/riscv/kvm/vcpu_sbi_v01.c @@ -55,6 +55,8 @@ static int kvm_sbi_ext_v01_handler(struct kvm_vcpu *vcpu, struct kvm_run *run, for_each_set_bit(i, &hmask, BITS_PER_LONG) { rvcpu = kvm_get_vcpu_by_id(vcpu->kvm, i); + if (!rvcpu) + continue; ret = kvm_riscv_vcpu_set_interrupt(rvcpu, IRQ_VS_SOFT); if (ret < 0) break; -- cgit v1.2.3 From c7832534a8160276cccb9a8cc8cafb5614c579d0 Mon Sep 17 00:00:00 2001 From: Jiakai Xu Date: Thu, 14 May 2026 08:17:51 +0000 Subject: RISC-V: KVM: Fix sign extension for MMIO loads The kvm_riscv_vcpu_mmio_return() function handles MMIO read results by writing the data back to the guest register. For signed load instructions (LB, LH, LW on RV64), the value needs sign-extension from a smaller integer to unsigned long. The current code uses: (ulong)data << shift >> shift but (ulong) makes the right shift a logical shift (zero-extend) rather than an arithmetic shift (sign-extend), causing incorrect results when the MMIO device returns a negative value. For example, LB reading 0x80 would return 128 instead of -128. Fix this by casting to (long) after the left shift so that the subsequent right shift is arithmetic and correctly propagates the sign bit: (long)((ulong)data << shift) >> shift Additionally, remove the unnecessary shift assignment for LBU (unsigned byte load) since it does not need sign extension. This makes LBU consistent with LHU and LWU which already keep shift = 0. Fixes: b91f0e4cb8a3 ("RISC-V: KVM: Factor-out instruction emulation into separate sources") Signed-off-by: Jiakai Xu Signed-off-by: Jiakai Xu Assisted-by: OpenClaw:DeepSeek-V3.2 Reviewed-by: Anup Patel Link: https://lore.kernel.org/r/20260514081752.472987-1-xujiakai2025@iscas.ac.cn Signed-off-by: Anup Patel --- arch/riscv/kvm/vcpu_insn.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/riscv/kvm/vcpu_insn.c b/arch/riscv/kvm/vcpu_insn.c index 4d89b94128ae..f09f9251d1f0 100644 --- a/arch/riscv/kvm/vcpu_insn.c +++ b/arch/riscv/kvm/vcpu_insn.c @@ -415,7 +415,6 @@ int kvm_riscv_vcpu_mmio_load(struct kvm_vcpu *vcpu, struct kvm_run *run, shift = 8 * (sizeof(ulong) - len); } else if ((insn & INSN_MASK_LBU) == INSN_MATCH_LBU) { len = 1; - shift = 8 * (sizeof(ulong) - len); #ifdef CONFIG_64BIT } else if ((insn & INSN_MASK_LD) == INSN_MATCH_LD) { len = 8; @@ -649,22 +648,22 @@ int kvm_riscv_vcpu_mmio_return(struct kvm_vcpu *vcpu, struct kvm_run *run) case 1: data8 = *((u8 *)run->mmio.data); SET_RD(insn, &vcpu->arch.guest_context, - (ulong)data8 << shift >> shift); + (long)((ulong)data8 << shift) >> shift); break; case 2: data16 = *((u16 *)run->mmio.data); SET_RD(insn, &vcpu->arch.guest_context, - (ulong)data16 << shift >> shift); + (long)((ulong)data16 << shift) >> shift); break; case 4: data32 = *((u32 *)run->mmio.data); SET_RD(insn, &vcpu->arch.guest_context, - (ulong)data32 << shift >> shift); + (long)((ulong)data32 << shift) >> shift); break; case 8: data64 = *((u64 *)run->mmio.data); SET_RD(insn, &vcpu->arch.guest_context, - (ulong)data64 << shift >> shift); + (long)((ulong)data64 << shift) >> shift); break; default: return -EOPNOTSUPP; -- cgit v1.2.3 From af0c3f05866237f7592219bfe05387bc3bfc99b5 Mon Sep 17 00:00:00 2001 From: Jianpeng Chang Date: Wed, 13 May 2026 15:22:09 +0800 Subject: dma-mapping: move dma_map_resource() sanity check into debug code dma_map_resource() uses pfn_valid() to ensure the range is not RAM. However, pfn_valid() only checks for availability of the memory map for a PFN but it does not ensure that the PFN is actually backed by RAM. On ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that share a section with RAM will falsely trigger the WARN_ON_ONCE and cause dma_map_resource() to return DMA_MAPPING_ERROR. This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because the SPI FIFO register (0xfe204004) falls in the same sparsemem section as the end of RAM (0xf8000000-0xfbffffff), both in section 31 (0xf8000000-0xffffffff). Move the sanity check from dma_map_resource() into debug_dma_map_phys() and replace the unreliable pfn_valid() with pfn_valid() && !PageReserved(), which correctly identifies actual usable RAM without false positives for MMIO regions that happen to have struct pages. Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check applies equally to both APIs. Any non-reserved page represents kernel memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost certainly wrong and risks breaking coherency on non-coherent platforms. ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have PageReserved set, so they will not trigger a false positive. The check no longer blocks the mapping and uses err_printk() to integrate with dma-debug filtering. Fixes: f7326196a781 ("dma-mapping: export new dma_*map_phys() interface") Reviewed-by: Robin Murphy Signed-off-by: Jianpeng Chang Reviewed-by: Leon Romanovsky Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20260513072209.1486986-1-jianpeng.chang.cn@windriver.com --- kernel/dma/debug.c | 9 ++++++++- kernel/dma/mapping.c | 4 ---- 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/kernel/dma/debug.c b/kernel/dma/debug.c index 1a725edbbbf6..3248f8b4d096 100644 --- a/kernel/dma/debug.c +++ b/kernel/dma/debug.c @@ -1251,7 +1251,14 @@ void debug_dma_map_phys(struct device *dev, phys_addr_t phys, size_t size, entry->direction = direction; entry->map_err_type = MAP_ERR_NOT_CHECKED; - if (!(attrs & DMA_ATTR_MMIO)) { + if (attrs & DMA_ATTR_MMIO) { + unsigned long pfn = PHYS_PFN(phys); + + if (pfn_valid(pfn) && !PageReserved(pfn_to_page(pfn))) + err_printk(dev, entry, + "dma_map_resource called for RAM address %pa\n", + &phys); + } else { check_for_stack(dev, phys); if (!PhysHighMem(phys)) diff --git a/kernel/dma/mapping.c b/kernel/dma/mapping.c index 23ed8eb9233e..e6b07f160d20 100644 --- a/kernel/dma/mapping.c +++ b/kernel/dma/mapping.c @@ -365,10 +365,6 @@ EXPORT_SYMBOL(dma_unmap_sg_attrs); dma_addr_t dma_map_resource(struct device *dev, phys_addr_t phys_addr, size_t size, enum dma_data_direction dir, unsigned long attrs) { - if (IS_ENABLED(CONFIG_DMA_API_DEBUG) && - WARN_ON_ONCE(pfn_valid(PHYS_PFN(phys_addr)))) - return DMA_MAPPING_ERROR; - return dma_map_phys(dev, phys_addr, size, dir, attrs | DMA_ATTR_MMIO); } EXPORT_SYMBOL(dma_map_resource); -- cgit v1.2.3 From 5f41161059fd0f1bbf18c90f3180e38cc45a14eb Mon Sep 17 00:00:00 2001 From: Helen Koike Date: Mon, 11 May 2026 18:53:05 -0300 Subject: debugobjects: Do not fill_pool() if pi_blocked_on On RT enabled kernels, fill_pool() ends up calling rtlock_lock(), which asserts if current::pi_blocked_on is set, because a task can obviously only block on one lock as otherwise the priority inheritenace chain gets corrupted. Prevent this by expanding the conditional to take current::pi_blocked_on into account. Fixes: 4bedcc28469a ("debugobjects: Make them PREEMPT_RT aware") Reported-by: syzbot+b8ca586b9fc235f0c0df@syzkaller.appspotmail.com Signed-off-by: Helen Koike Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260511215359.3351259-1-koike@igalia.com Closes: https://syzkaller.appspot.com/bug?extid=b8ca586b9fc235f0c0df --- lib/debugobjects.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/lib/debugobjects.c b/lib/debugobjects.c index 12e2e42e6a31..772ddabcbe7d 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -711,6 +711,15 @@ static struct debug_obj *lookup_object_or_alloc(void *addr, struct debug_bucket return NULL; } +static inline bool debug_objects_is_pi_blocked_on(void) +{ +#ifdef CONFIG_RT_MUTEXES + return current->pi_blocked_on != NULL; +#else + return false; +#endif +} + static void debug_objects_fill_pool(void) { if (!static_branch_likely(&obj_cache_enabled)) @@ -727,11 +736,12 @@ static void debug_objects_fill_pool(void) /* * On RT enabled kernels the pool refill must happen in preemptible - * context -- for !RT kernels we rely on the fact that spinlock_t and - * raw_spinlock_t are basically the same type and this lock-type - * inversion works just fine. + * context and not enqueued on an rt_mutex -- for !RT kernels we rely + * on the fact that spinlock_t and raw_spinlock_t are basically the + * same type and this lock-type inversion works just fine. */ - if (!IS_ENABLED(CONFIG_PREEMPT_RT) || preemptible() || system_state < SYSTEM_SCHEDULING) { + if (!IS_ENABLED(CONFIG_PREEMPT_RT) || system_state < SYSTEM_SCHEDULING || + (preemptible() && !debug_objects_is_pi_blocked_on())) { /* * Annotate away the spinlock_t inside raw_spinlock_t warning * by temporarily raising the wait-type to LD_WAIT_CONFIG, matching -- cgit v1.2.3 From e02b5262fd288cc235f14e12233ea54e78c04611 Mon Sep 17 00:00:00 2001 From: Julien Chauveau Date: Tue, 24 Mar 2026 20:30:11 +0100 Subject: drm/bridge: it66121: acquire reset GPIO in probe The it66121_ctx structure has a gpio_reset field, and it66121_hw_reset() calls gpiod_set_value() on it. However, the GPIO descriptor is never acquired via devm_gpiod_get(), leaving gpio_reset as NULL throughout the driver lifetime. gpiod_set_value() silently returns when passed a NULL descriptor, so the hardware reset sequence in it66121_hw_reset() is a no-op. This leaves the chip in an undefined state at probe time, which can prevent it from responding on the I2C bus. The DT binding marks reset-gpios as a required property, so all compliant device trees provide this GPIO. Add the missing devm_gpiod_get() call after enabling power supplies and before the hardware reset, so the chip is properly reset with power applied. Fixes: 988156dc2fc9 ("drm: bridge: add it66121 driver") Cc: stable@vger.kernel.org Signed-off-by: Julien Chauveau Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Link: https://patch.msgid.link/20260324193011.16583-1-chauveau.julien@gmail.com Signed-off-by: Javier Martinez Canillas --- drivers/gpu/drm/bridge/ite-it66121.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/bridge/ite-it66121.c b/drivers/gpu/drm/bridge/ite-it66121.c index 9246e9c15a6e..ed21f09cd19a 100644 --- a/drivers/gpu/drm/bridge/ite-it66121.c +++ b/drivers/gpu/drm/bridge/ite-it66121.c @@ -1559,6 +1559,11 @@ static int it66121_probe(struct i2c_client *client) return ret; } + ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->gpio_reset)) + return dev_err_probe(dev, PTR_ERR(ctx->gpio_reset), + "Failed to get reset GPIO\n"); + it66121_hw_reset(ctx); ctx->regmap = devm_regmap_init_i2c(client, &it66121_regmap_config); -- cgit v1.2.3 From f9b2d3b703d13df50c630997dfdc25648e96db0d Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Mon, 18 May 2026 10:31:11 +0200 Subject: regulator: tps65219: fix irq_data.rdev not being assigned Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper function") removed the tps65219_get_rdev_by_name() helper along with the irq_data.rdev assignment that depended on it. This left irq_data.rdev uninitialized for all IRQs, causing undefined behavior when regulator_notifier_call_chain() is called from the IRQ handler: Internal error: Oops: 0000000096000004 pc : regulator_notifier_call_chain lr : tps65219_regulator_irq_handler Call trace: regulator_notifier_call_chain tps65219_regulator_irq_handler handle_nested_irq regmap_irq_thread irq_thread_fn irq_thread kthread ret_from_fork Instead of restoring a dedicated lookup array, restructure the probe function to combine regulator registration with IRQ registration in the same loop. This way the rdev returned by devm_regulator_register() is naturally available for assigning to irq_data.rdev without any auxiliary data structure. Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any registered regulator are registered with rdev=NULL, and the IRQ handler is protected with a NULL check to avoid crashing. Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/aBDSTxALaOc-PD7X@gaggiata.pivistrello.it/ Reported-by: Francesco Dolcini Fixes: 64a6b577490c ("regulator: tps65219: Remove debugging helper function") Signed-off-by: Alexander Sverdlin Link: https://patch.msgid.link/20260518083113.2063368-1-alexander.sverdlin@siemens.com Signed-off-by: Mark Brown --- drivers/regulator/tps65219-regulator.c | 135 +++++++++++++++++++++++---------- 1 file changed, 95 insertions(+), 40 deletions(-) diff --git a/drivers/regulator/tps65219-regulator.c b/drivers/regulator/tps65219-regulator.c index d77ca486879f..324c3a33af8a 100644 --- a/drivers/regulator/tps65219-regulator.c +++ b/drivers/regulator/tps65219-regulator.c @@ -346,8 +346,9 @@ static irqreturn_t tps65219_regulator_irq_handler(int irq, void *data) return IRQ_HANDLED; } - regulator_notifier_call_chain(irq_data->rdev, - irq_data->type->event, NULL); + if (irq_data->rdev) + regulator_notifier_call_chain(irq_data->rdev, + irq_data->type->event, NULL); dev_err(irq_data->dev, "Error IRQ trap %s for %s\n", irq_data->type->event_name, irq_data->type->regulator_name); @@ -398,14 +399,65 @@ static struct tps65219_chip_data chip_info_table[] = { }, }; -static int tps65219_regulator_probe(struct platform_device *pdev) +static bool tps65219_is_regulator_name(const struct tps65219_chip_data *pmic, + const char *name) +{ + int i; + + for (i = 0; i < pmic->common_rdesc_size; i++) + if (!strcmp(pmic->common_rdesc[i].name, name)) + return true; + for (i = 0; i < pmic->rdesc_size; i++) + if (!strcmp(pmic->rdesc[i].name, name)) + return true; + return false; +} + +static int tps65219_register_irqs(struct platform_device *pdev, + struct tps65219 *tps, + struct regulator_dev *rdev, + struct tps65219_regulator_irq_type *irq_types, + int nirqs, + const char *regulator_name) { struct tps65219_regulator_irq_data *irq_data; + int i, irq, error; + + for (i = 0; i < nirqs; i++) { + if (strcmp(irq_types[i].regulator_name, regulator_name)) + continue; + + irq = platform_get_irq_byname(pdev, irq_types[i].irq_name); + if (irq < 0) + return -EINVAL; + + irq_data = devm_kmalloc(tps->dev, sizeof(*irq_data), GFP_KERNEL); + if (!irq_data) + return -ENOMEM; + + irq_data->dev = tps->dev; + irq_data->type = &irq_types[i]; + irq_data->rdev = rdev; + + error = devm_request_threaded_irq(tps->dev, irq, NULL, + tps65219_regulator_irq_handler, + IRQF_ONESHOT, + irq_types[i].irq_name, + irq_data); + if (error) + return dev_err_probe(tps->dev, error, + "Failed to request %s IRQ %d\n", + irq_types[i].irq_name, irq); + } + return 0; +} + +static int tps65219_regulator_probe(struct platform_device *pdev) +{ struct tps65219_regulator_irq_type *irq_type; struct tps65219_chip_data *pmic; struct regulator_dev *rdev; int error; - int irq; int i; struct tps65219 *tps = dev_get_drvdata(pdev->dev.parent); @@ -425,6 +477,19 @@ static int tps65219_regulator_probe(struct platform_device *pdev) return dev_err_probe(tps->dev, PTR_ERR(rdev), "Failed to register %s regulator\n", pmic->common_rdesc[i].name); + + error = tps65219_register_irqs(pdev, tps, rdev, + pmic->common_irq_types, + pmic->common_irq_size, + pmic->common_rdesc[i].name); + if (error) + return error; + error = tps65219_register_irqs(pdev, tps, rdev, + pmic->irq_types, + pmic->dev_irq_size, + pmic->common_rdesc[i].name); + if (error) + return error; } for (i = 0; i < pmic->rdesc_size; i++) { @@ -434,52 +499,42 @@ static int tps65219_regulator_probe(struct platform_device *pdev) return dev_err_probe(tps->dev, PTR_ERR(rdev), "Failed to register %s regulator\n", pmic->rdesc[i].name); + + error = tps65219_register_irqs(pdev, tps, rdev, + pmic->common_irq_types, + pmic->common_irq_size, + pmic->rdesc[i].name); + if (error) + return error; + error = tps65219_register_irqs(pdev, tps, rdev, + pmic->irq_types, + pmic->dev_irq_size, + pmic->rdesc[i].name); + if (error) + return error; } + /* Register non-regulator IRQs (TIMEOUT, SENSOR) with rdev=NULL */ for (i = 0; i < pmic->common_irq_size; ++i) { irq_type = &pmic->common_irq_types[i]; - irq = platform_get_irq_byname(pdev, irq_type->irq_name); - if (irq < 0) - return -EINVAL; - - irq_data = devm_kmalloc(tps->dev, sizeof(*irq_data), GFP_KERNEL); - if (!irq_data) - return -ENOMEM; - - irq_data->dev = tps->dev; - irq_data->type = irq_type; - error = devm_request_threaded_irq(tps->dev, irq, NULL, - tps65219_regulator_irq_handler, - IRQF_ONESHOT, - irq_type->irq_name, - irq_data); + if (tps65219_is_regulator_name(pmic, irq_type->regulator_name)) + continue; + error = tps65219_register_irqs(pdev, tps, NULL, + irq_type, 1, + irq_type->regulator_name); if (error) - return dev_err_probe(tps->dev, error, - "Failed to request %s IRQ %d\n", - irq_type->irq_name, irq); + return error; } for (i = 0; i < pmic->dev_irq_size; ++i) { irq_type = &pmic->irq_types[i]; - irq = platform_get_irq_byname(pdev, irq_type->irq_name); - if (irq < 0) - return -EINVAL; - - irq_data = devm_kmalloc(tps->dev, sizeof(*irq_data), GFP_KERNEL); - if (!irq_data) - return -ENOMEM; - - irq_data->dev = tps->dev; - irq_data->type = irq_type; - error = devm_request_threaded_irq(tps->dev, irq, NULL, - tps65219_regulator_irq_handler, - IRQF_ONESHOT, - irq_type->irq_name, - irq_data); + if (tps65219_is_regulator_name(pmic, irq_type->regulator_name)) + continue; + error = tps65219_register_irqs(pdev, tps, NULL, + irq_type, 1, + irq_type->regulator_name); if (error) - return dev_err_probe(tps->dev, error, - "Failed to request %s IRQ %d\n", - irq_type->irq_name, irq); + return error; } return 0; -- cgit v1.2.3 From 360190bd965f93794d5f5685a6de22ce6da2b672 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Thu, 14 May 2026 09:38:59 +0200 Subject: ata: libata-scsi: improve readability of ata_scsi_qc_issue() Improve readability of ata_scsi_qc_issue(). No functional changes. Tested-by: Tommy Kelly Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel --- drivers/ata/libata-scsi.c | 43 +++++++++++++++++++++---------------------- 1 file changed, 21 insertions(+), 22 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index f44612e269a4..f9ca5410e223 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1767,7 +1767,7 @@ static int ata_scsi_qc_issue(struct ata_port *ap, struct ata_queued_cmd *qc) int ret; if (!ap->ops->qc_defer) - goto issue; + goto issue_qc; /* * If we already have a deferred qc, then rely on the SCSI layer to @@ -1786,38 +1786,37 @@ static int ata_scsi_qc_issue(struct ata_port *ap, struct ata_queued_cmd *qc) break; case ATA_DEFER_LINK: ret = SCSI_MLQUEUE_DEVICE_BUSY; - break; + goto defer_qc; case ATA_DEFER_PORT: ret = SCSI_MLQUEUE_HOST_BUSY; - break; + goto defer_qc; default: WARN_ON_ONCE(1); ret = SCSI_MLQUEUE_HOST_BUSY; - break; + goto defer_qc; } - if (ret) { - /* - * We must defer this qc: if this is not an NCQ command, keep - * this qc as a deferred one and report to the SCSI layer that - * we issued it so that it is not requeued. The deferred qc will - * be issued with the port deferred_qc_work once all on-going - * commands complete. - */ - if (!ata_is_ncq(qc->tf.protocol)) { - ap->deferred_qc = qc; - return 0; - } +issue_qc: + ata_qc_issue(qc); + return 0; - /* Force a requeue of the command to defer its execution. */ - ata_qc_free(qc); - return ret; +defer_qc: + /* + * We must defer this qc: if this is not an NCQ command, keep + * this qc as a deferred one and report to the SCSI layer that + * we issued it so that it is not requeued. The deferred qc will + * be issued with the port deferred_qc_work once all on-going + * commands complete. + */ + if (!ata_is_ncq(qc->tf.protocol)) { + ap->deferred_qc = qc; + return 0; } -issue: - ata_qc_issue(qc); + /* Force a requeue of the command to defer its execution. */ + ata_qc_free(qc); - return 0; + return ret; } /** -- cgit v1.2.3 From ce4548807d2e4ae48fd0dbe38865467369877913 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Thu, 14 May 2026 09:39:00 +0200 Subject: ata: libata-scsi: do not use the deferred QC feature for ATA_DEFER_PORT The deferred QC feature was meant to handle mixed NCQ and non-NCQ commands, i.e. for return value ATA_DEFER_LINK. ATA_DEFER_PORT is returned by PATA drivers, but also certain SATA drivers like sata_mv and sata_sil24 that uses ap->excl_link to workaround hardware bugs in these HBAs. Regardless of the reason, using the deferred QC feature for ATA_DEFER_PORT is always wrong, and will break the ap->excl_link usage of the SATA drivers that rely on that feature. Modify ata_scsi_qc_issue() to only use the deferred QC feature when mixing NCQ and non-NCQ commands, i.e. ATA_DEFER_LINK. Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Tested-by: Tommy Kelly Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel --- drivers/ata/libata-scsi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index f9ca5410e223..f03b6326ad2d 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1789,11 +1789,11 @@ static int ata_scsi_qc_issue(struct ata_port *ap, struct ata_queued_cmd *qc) goto defer_qc; case ATA_DEFER_PORT: ret = SCSI_MLQUEUE_HOST_BUSY; - goto defer_qc; + goto free_qc; default: WARN_ON_ONCE(1); ret = SCSI_MLQUEUE_HOST_BUSY; - goto defer_qc; + goto free_qc; } issue_qc: @@ -1813,6 +1813,7 @@ defer_qc: return 0; } +free_qc: /* Force a requeue of the command to defer its execution. */ ata_qc_free(qc); -- cgit v1.2.3 From f233124fb36cd57ef09f96d517a38ab4b902e15e Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Thu, 14 May 2026 09:39:01 +0200 Subject: ata: libata-scsi: do not use the deferred QC feature on PMPs with CBS When using Port Multipliers (PMPs) with Command-Based Switching (CBS), you can only issue commands to one link at a time. For PMPs with CBS, there is already code to handle commands being sent to different links in sata_pmp_qc_defer_cmd_switch() using ap->excl_link. sata_sil24 also makes use of ap->excl_link. A user on the list reported that commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") broke PMPs with CBS. The commit introduced code that stores a deferred qc in ap->deferred_qc, to later be issued via a workqueue. It turns out that this change is incompatible with the existing ap->excl_link handling used by PMPs with CBS. Thus, modify sata_pmp_qc_defer_cmd_switch() and sil24_qc_defer() to return ATA_DEFER_LINK_EXCL, and make sure that the deferred QC handling via workqueue is not used for this return value. This way, PMPs with CBS will work once again. Note that the starvation referenced in commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") can only happen on libsas ports, and libsas does not support Port Multipliers, thus there is no harm of reverting back to the previous way of deferring commands for PMPs with CBS. Non-libsas ports connected to anything but a PMP with CBS (e.g. a normal drive or a PMP with FBS) will continue using the deferred workqueue, since it does result in lower completion latencies for non-NCQ commands, even though the workqueue is not strictly needed to avoid starvation for non-libsas ports. If we want to modify the scope of the workqueue issuing to also handle PMPs with CBS, then we should ensure that we can save both NCQ and non-NCQ commands in ap->deferred_qc, while also removing the existing PMP CBS handling using ap->excl_link, such that we don't duplicate features. While at it, also add a comment explaining how the ap->excl_link mechanism works. Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Tested-by: Tommy Kelly Reported-by: Tommy Kelly Closes: https://lore.kernel.org/linux-ide/ce09cc21-a8e9-4845-b205-35411e22fba9@tkel.ly/ Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel --- drivers/ata/libata-pmp.c | 13 ++++++++++++- drivers/ata/libata-scsi.c | 8 ++++++++ drivers/ata/sata_sil24.c | 6 +++++- include/linux/libata.h | 1 + 4 files changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index e3adc008fed1..7e889534d73b 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -110,13 +110,24 @@ int sata_pmp_qc_defer_cmd_switch(struct ata_queued_cmd *qc) { struct ata_link *link = qc->dev->link; struct ata_port *ap = link->ap; + int ret; if (ap->excl_link == NULL || ap->excl_link == link) { if (ap->nr_active_links == 0 || ata_link_active(link)) { qc->flags |= ATA_QCFLAG_CLEAR_EXCL; - return ata_std_qc_defer(qc); + ret = ata_std_qc_defer(qc); + if (ret == ATA_DEFER_LINK) + return ATA_DEFER_LINK_EXCL; + return ret; } + /* + * Note: ap->excl_link contains the link that is next in line, + * i.e. implicit round robin. If there is only one link + * dispatching, ap->excl_link will be left unclaimed, allowing + * other links to set ap->excl_link, ensuring that the currently + * active link cannot queue any more. + */ ap->excl_link = link; } diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index f03b6326ad2d..ca29744c57f9 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1787,6 +1787,14 @@ static int ata_scsi_qc_issue(struct ata_port *ap, struct ata_queued_cmd *qc) case ATA_DEFER_LINK: ret = SCSI_MLQUEUE_DEVICE_BUSY; goto defer_qc; + case ATA_DEFER_LINK_EXCL: + /* + * Drivers making use of ap->excl_link cannot store the QC in + * ap->deferred_qc, because the ap->excl_link handling is + * incompatible with the ap->deferred_qc workqueue handling. + */ + ret = SCSI_MLQUEUE_DEVICE_BUSY; + goto free_qc; case ATA_DEFER_PORT: ret = SCSI_MLQUEUE_HOST_BUSY; goto free_qc; diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index d642ece9f07a..57f1081b86db 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -789,6 +789,7 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc) struct ata_link *link = qc->dev->link; struct ata_port *ap = link->ap; u8 prot = qc->tf.protocol; + int ret; /* * There is a bug in the chip: @@ -826,7 +827,10 @@ static int sil24_qc_defer(struct ata_queued_cmd *qc) qc->flags |= ATA_QCFLAG_CLEAR_EXCL; } - return ata_std_qc_defer(qc); + ret = ata_std_qc_defer(qc); + if (ret == ATA_DEFER_LINK) + return ATA_DEFER_LINK_EXCL; + return ret; } static enum ata_completion_errors sil24_qc_prep(struct ata_queued_cmd *qc) diff --git a/include/linux/libata.h b/include/linux/libata.h index 5c085ef4eda7..360776016b50 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -371,6 +371,7 @@ enum { /* return values for ->qc_defer */ ATA_DEFER_LINK = 1, ATA_DEFER_PORT = 2, + ATA_DEFER_LINK_EXCL = 3, /* desc_len for ata_eh_info and context */ ATA_EH_DESC_LEN = 80, -- cgit v1.2.3 From 759e8756da00aa115d504a18155b1d1ee1cc12e8 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Thu, 14 May 2026 09:39:02 +0200 Subject: ata: libata-scsi: do not needlessly defer commands when using PMP with FBS The ACS specification does not allow a non-NCQ command to be issued while an NCQ command is outstanding. Commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") introduced a feature where a deferred non-NCQ command gets issued from a workqueue. The design stores a single non-NCQ command per port. However, when using Port Multipliers (PMPs), specifically PMPs that support FIS-Based Switching (FBS), non-NCQ and NCQ commands can be mixed on the same port, just not for the same link, see e.g. ata_std_qc_defer() which is, and always has operated on a per-link basis. Therefore, move the deferred_qc from struct ata_port to struct ata_link. This way, when using a PMP with FBS, we will not needlessly defer commands to all other links, just because one link issued a non-NCQ command while having an NCQ command outstanding. Only commands for that specific link will be deferred. This is in line with how PMPs with FBS worked before commit 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation"). Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation") Tested-by: Tommy Kelly Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel --- drivers/ata/libata-core.c | 9 ++++++--- drivers/ata/libata-eh.c | 8 ++++---- drivers/ata/libata-pmp.c | 5 ++++- drivers/ata/libata-scsi.c | 43 +++++++++++++++++++++++++------------------ include/linux/libata.h | 6 +++--- 5 files changed, 42 insertions(+), 29 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e76d15411e2a..3d0027ec33c2 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5584,6 +5584,7 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp) link->pmp = pmp; link->active_tag = ATA_TAG_POISON; link->hw_sata_spd_limit = UINT_MAX; + INIT_WORK(&link->deferred_qc_work, ata_scsi_deferred_qc_work); /* can't use iterator, ap isn't initialized yet */ for (i = 0; i < ATA_MAX_DEVICES; i++) { @@ -5666,7 +5667,6 @@ struct ata_port *ata_port_alloc(struct ata_host *host) mutex_init(&ap->scsi_scan_mutex); INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); INIT_DELAYED_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); - INIT_WORK(&ap->deferred_qc_work, ata_scsi_deferred_qc_work); INIT_LIST_HEAD(&ap->eh_done_q); init_waitqueue_head(&ap->eh_wait_q); init_completion(&ap->park_req_pending); @@ -6291,12 +6291,15 @@ static void ata_port_detach(struct ata_port *ap) /* It better be dead now and not have any remaining deferred qc. */ WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED)); - WARN_ON(ap->deferred_qc); - cancel_work_sync(&ap->deferred_qc_work); cancel_delayed_work_sync(&ap->hotplug_task); cancel_delayed_work_sync(&ap->scsi_rescan_task); + ata_for_each_link(link, ap, PMP_FIRST) { + WARN_ON(link->deferred_qc); + cancel_work_sync(&link->deferred_qc_work); + } + /* Delete port multiplier link transport devices */ if (ap->pmp_link) { int i; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 9a4b67b90b17..d623eb32ed8b 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -651,11 +651,11 @@ int ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, if (qc->scsicmd != scmd) continue; if ((qc->flags & ATA_QCFLAG_ACTIVE) || - qc == ap->deferred_qc) + qc == qc->dev->link->deferred_qc) break; } - if (i < ATA_MAX_QUEUE && qc == ap->deferred_qc) { + if (i < ATA_MAX_QUEUE && qc == qc->dev->link->deferred_qc) { /* * This is a deferred command that timed out while * waiting for the command queue to drain. Since the qc @@ -666,8 +666,8 @@ int ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap, * deferred qc work from issuing this qc. */ WARN_ON_ONCE(qc->flags & ATA_QCFLAG_ACTIVE); - ap->deferred_qc = NULL; - cancel_work(&ap->deferred_qc_work); + qc->dev->link->deferred_qc = NULL; + cancel_work(&qc->dev->link->deferred_qc_work); set_host_byte(scmd, DID_TIME_OUT); scsi_eh_finish_cmd(scmd, &ap->eh_done_q); } else if (i < ATA_MAX_QUEUE) { diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 7e889534d73b..e8540931b4a1 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -582,8 +582,11 @@ static void sata_pmp_detach(struct ata_device *dev) if (ap->ops->pmp_detach) ap->ops->pmp_detach(ap); - ata_for_each_link(tlink, ap, EDGE) + ata_for_each_link(tlink, ap, EDGE) { + WARN_ON(tlink->deferred_qc); + cancel_work_sync(&tlink->deferred_qc_work); ata_eh_detach_dev(tlink->device); + } spin_lock_irqsave(ap->lock, flags); ap->nr_pmp_links = 0; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index ca29744c57f9..d43207c6e467 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1664,8 +1664,9 @@ static void ata_scsi_qc_done(struct ata_queued_cmd *qc, bool set_result, void ata_scsi_deferred_qc_work(struct work_struct *work) { - struct ata_port *ap = - container_of(work, struct ata_port, deferred_qc_work); + struct ata_link *link = + container_of(work, struct ata_link, deferred_qc_work); + struct ata_port *ap = link->ap; struct ata_queued_cmd *qc; unsigned long flags; @@ -1676,10 +1677,10 @@ void ata_scsi_deferred_qc_work(struct work_struct *work) * such case, we should not need any more deferring the qc, so warn if * qc_defer() says otherwise. */ - qc = ap->deferred_qc; + qc = link->deferred_qc; if (qc && !ata_port_eh_scheduled(ap)) { WARN_ON_ONCE(ap->ops->qc_defer(qc)); - ap->deferred_qc = NULL; + link->deferred_qc = NULL; ata_qc_issue(qc); } @@ -1688,7 +1689,7 @@ void ata_scsi_deferred_qc_work(struct work_struct *work) void ata_scsi_requeue_deferred_qc(struct ata_port *ap) { - struct ata_queued_cmd *qc = ap->deferred_qc; + struct ata_link *link; lockdep_assert_held(ap->lock); @@ -1697,16 +1698,21 @@ void ata_scsi_requeue_deferred_qc(struct ata_port *ap) * do not try to be smart about what to do with this deferred command * and simply requeue it by completing it with DID_REQUEUE. */ - if (qc) { - ap->deferred_qc = NULL; - cancel_work(&ap->deferred_qc_work); - ata_scsi_qc_done(qc, true, DID_REQUEUE << 16); + ata_for_each_link(link, ap, PMP_FIRST) { + struct ata_queued_cmd *qc = link->deferred_qc; + + if (qc) { + link->deferred_qc = NULL; + cancel_work(&link->deferred_qc_work); + ata_scsi_qc_done(qc, true, DID_REQUEUE << 16); + } } } -static void ata_scsi_schedule_deferred_qc(struct ata_port *ap) +static void ata_scsi_schedule_deferred_qc(struct ata_link *link) { - struct ata_queued_cmd *qc = ap->deferred_qc; + struct ata_queued_cmd *qc = link->deferred_qc; + struct ata_port *ap = link->ap; lockdep_assert_held(ap->lock); @@ -1723,12 +1729,12 @@ static void ata_scsi_schedule_deferred_qc(struct ata_port *ap) return; } if (!ap->ops->qc_defer(qc)) - queue_work(system_highpri_wq, &ap->deferred_qc_work); + queue_work(system_highpri_wq, &link->deferred_qc_work); } static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) { - struct ata_port *ap = qc->ap; + struct ata_link *link = qc->dev->link; struct scsi_cmnd *cmd = qc->scsicmd; u8 *cdb = cmd->cmnd; bool have_sense = qc->flags & ATA_QCFLAG_SENSE_VALID; @@ -1759,11 +1765,12 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) ata_scsi_qc_done(qc, false, 0); - ata_scsi_schedule_deferred_qc(ap); + ata_scsi_schedule_deferred_qc(link); } static int ata_scsi_qc_issue(struct ata_port *ap, struct ata_queued_cmd *qc) { + struct ata_link *link = qc->dev->link; int ret; if (!ap->ops->qc_defer) @@ -1774,7 +1781,7 @@ static int ata_scsi_qc_issue(struct ata_port *ap, struct ata_queued_cmd *qc) * requeue and defer all incoming commands until the deferred qc is * processed, once all on-going commands complete. */ - if (ap->deferred_qc) { + if (link->deferred_qc) { ata_qc_free(qc); return SCSI_MLQUEUE_DEVICE_BUSY; } @@ -1790,8 +1797,8 @@ static int ata_scsi_qc_issue(struct ata_port *ap, struct ata_queued_cmd *qc) case ATA_DEFER_LINK_EXCL: /* * Drivers making use of ap->excl_link cannot store the QC in - * ap->deferred_qc, because the ap->excl_link handling is - * incompatible with the ap->deferred_qc workqueue handling. + * link->deferred_qc, because the ap->excl_link handling is + * incompatible with the link->deferred_qc workqueue handling. */ ret = SCSI_MLQUEUE_DEVICE_BUSY; goto free_qc; @@ -1817,7 +1824,7 @@ defer_qc: * commands complete. */ if (!ata_is_ncq(qc->tf.protocol)) { - ap->deferred_qc = qc; + link->deferred_qc = qc; return 0; } diff --git a/include/linux/libata.h b/include/linux/libata.h index 360776016b50..127229fbd1a6 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -855,6 +855,9 @@ struct ata_link { unsigned int sata_spd; /* current SATA PHY speed */ enum ata_lpm_policy lpm_policy; + struct work_struct deferred_qc_work; + struct ata_queued_cmd *deferred_qc; + /* record runtime error info, protected by host_set lock */ struct ata_eh_info eh_info; /* EH context */ @@ -900,9 +903,6 @@ struct ata_port { u64 qc_active; int nr_active_links; /* #links with active qcs */ - struct work_struct deferred_qc_work; - struct ata_queued_cmd *deferred_qc; - struct ata_link link; /* host default link */ struct ata_link *slave_link; /* see ata_slave_link_init() */ -- cgit v1.2.3 From 379e8f1ca5e919b130b40d8115d92a536e5f8d7a Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 18 May 2026 13:41:45 +0200 Subject: drm/gem: Make the GEM LRU lock part of drm_device Recently, a few races have been discovered in the GEM LRU logic, all of them caused by the fact the LRU lock is accessed through gem->lru->lock, and that very same lock also protects changes to gem->lru, leading to situations where gem->lru needs to first be accessed without the lock held, to then get the lru to access the lock through and finally take the lock and do the expected operation. Currently, the only driver making use of this API (MSM) declares a device-wide lock, and the user we're about to add (panthor) will do the same. There's no evidence that we will ever have a driver that wants different pools of LRUs protected by different locks under the same drm_device. So we're better off moving this lock to drm_device and always locking it through obj->dev->gem_lru_mutex, or directly through dev->gem_lru_mutex. If anyone ever needs more fine-grained locking, this can be revisited to pass some drm_gem_lru_pool object representing the pool of LRUs under a specific lock, but for now, the per-device lock seems to be enough. Fixes: e7c2af13f811 ("drm/gem: Add LRU/shrinker helper") Reported-by: Chia-I Wu Closes: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/86 Reviewed-by: Rob Clark Reviewed-by: Liviu Dudau Reviewed-by: Steven Price Reviewed-by: Chia-I Wu Link: https://patch.msgid.link/20260518-panthor-shrinker-fixes-v4-1-1920234470d5@collabora.com Signed-off-by: Boris Brezillon --- drivers/gpu/drm/drm_drv.c | 2 ++ drivers/gpu/drm/drm_gem.c | 36 +++++++++++++++------------------- drivers/gpu/drm/msm/msm_drv.c | 11 +++++------ drivers/gpu/drm/msm/msm_drv.h | 7 ------- drivers/gpu/drm/msm/msm_gem.c | 33 +++++++++++++++---------------- drivers/gpu/drm/msm/msm_gem_shrinker.c | 4 ++-- drivers/gpu/drm/msm/msm_gem_submit.c | 6 +++--- drivers/gpu/drm/msm/msm_gem_vma.c | 12 ++++++------ drivers/gpu/drm/msm/msm_ringbuffer.c | 6 +++--- include/drm/drm_device.h | 7 +++++++ include/drm/drm_gem.h | 20 +++++++++---------- 11 files changed, 69 insertions(+), 75 deletions(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 985c283cf59f..675675480da4 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -697,6 +697,7 @@ static void drm_dev_init_release(struct drm_device *dev, void *res) mutex_destroy(&dev->master_mutex); mutex_destroy(&dev->clientlist_mutex); mutex_destroy(&dev->filelist_mutex); + mutex_destroy(&dev->gem_lru_mutex); } static int drm_dev_init(struct drm_device *dev, @@ -738,6 +739,7 @@ static int drm_dev_init(struct drm_device *dev, INIT_LIST_HEAD(&dev->vblank_event_list); spin_lock_init(&dev->event_lock); + mutex_init(&dev->gem_lru_mutex); mutex_init(&dev->filelist_mutex); mutex_init(&dev->clientlist_mutex); mutex_init(&dev->master_mutex); diff --git a/drivers/gpu/drm/drm_gem.c b/drivers/gpu/drm/drm_gem.c index d6424267260b..b95b015d2983 100644 --- a/drivers/gpu/drm/drm_gem.c +++ b/drivers/gpu/drm/drm_gem.c @@ -1541,12 +1541,10 @@ EXPORT_SYMBOL(drm_gem_unlock_reservations); * drm_gem_lru_init - initialize a LRU * * @lru: The LRU to initialize - * @lock: The lock protecting the LRU */ void -drm_gem_lru_init(struct drm_gem_lru *lru, struct mutex *lock) +drm_gem_lru_init(struct drm_gem_lru *lru) { - lru->lock = lock; lru->count = 0; INIT_LIST_HEAD(&lru->list); } @@ -1571,14 +1569,10 @@ drm_gem_lru_remove_locked(struct drm_gem_object *obj) void drm_gem_lru_remove(struct drm_gem_object *obj) { - struct drm_gem_lru *lru = obj->lru; - - if (!lru) - return; - - mutex_lock(lru->lock); - drm_gem_lru_remove_locked(obj); - mutex_unlock(lru->lock); + mutex_lock(&obj->dev->gem_lru_mutex); + if (obj->lru) + drm_gem_lru_remove_locked(obj); + mutex_unlock(&obj->dev->gem_lru_mutex); } EXPORT_SYMBOL(drm_gem_lru_remove); @@ -1593,7 +1587,7 @@ EXPORT_SYMBOL(drm_gem_lru_remove); void drm_gem_lru_move_tail_locked(struct drm_gem_lru *lru, struct drm_gem_object *obj) { - lockdep_assert_held_once(lru->lock); + lockdep_assert_held_once(&obj->dev->gem_lru_mutex); if (obj->lru) drm_gem_lru_remove_locked(obj); @@ -1617,9 +1611,9 @@ EXPORT_SYMBOL(drm_gem_lru_move_tail_locked); void drm_gem_lru_move_tail(struct drm_gem_lru *lru, struct drm_gem_object *obj) { - mutex_lock(lru->lock); + mutex_lock(&obj->dev->gem_lru_mutex); drm_gem_lru_move_tail_locked(lru, obj); - mutex_unlock(lru->lock); + mutex_unlock(&obj->dev->gem_lru_mutex); } EXPORT_SYMBOL(drm_gem_lru_move_tail); @@ -1633,6 +1627,7 @@ EXPORT_SYMBOL(drm_gem_lru_move_tail); * of the shrink callback to check for this (ie. dma_resv_test_signaled()) * or if necessary block until the buffer becomes idle. * + * @dev: DRM device the LRU belongs to * @lru: The LRU to scan * @nr_to_scan: The number of pages to try to reclaim * @remaining: The number of pages left to reclaim, should be initialized by caller @@ -1640,7 +1635,8 @@ EXPORT_SYMBOL(drm_gem_lru_move_tail); * @ticket: Optional ww_acquire_ctx context to use for locking */ unsigned long -drm_gem_lru_scan(struct drm_gem_lru *lru, +drm_gem_lru_scan(struct drm_device *dev, + struct drm_gem_lru *lru, unsigned int nr_to_scan, unsigned long *remaining, bool (*shrink)(struct drm_gem_object *obj, struct ww_acquire_ctx *ticket), @@ -1650,9 +1646,9 @@ drm_gem_lru_scan(struct drm_gem_lru *lru, struct drm_gem_object *obj; unsigned freed = 0; - drm_gem_lru_init(&still_in_lru, lru->lock); + drm_gem_lru_init(&still_in_lru); - mutex_lock(lru->lock); + mutex_lock(&dev->gem_lru_mutex); while (freed < nr_to_scan) { obj = list_first_entry_or_null(&lru->list, typeof(*obj), lru_node); @@ -1675,7 +1671,7 @@ drm_gem_lru_scan(struct drm_gem_lru *lru, * rest of the loop body, to reduce contention with other * code paths that need the LRU lock */ - mutex_unlock(lru->lock); + mutex_unlock(&dev->gem_lru_mutex); if (ticket) ww_acquire_init(ticket, &reservation_ww_class); @@ -1709,7 +1705,7 @@ drm_gem_lru_scan(struct drm_gem_lru *lru, tail: drm_gem_object_put(obj); - mutex_lock(lru->lock); + mutex_lock(&dev->gem_lru_mutex); } /* @@ -1721,7 +1717,7 @@ tail: list_splice_tail(&still_in_lru.list, &lru->list); lru->count += still_in_lru.count; - mutex_unlock(lru->lock); + mutex_unlock(&dev->gem_lru_mutex); return freed; } diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index 195f40e331e5..cc2bcd14b1c2 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -128,11 +128,10 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv, /* * Initialize the LRUs: */ - mutex_init(&priv->lru.lock); - drm_gem_lru_init(&priv->lru.unbacked, &priv->lru.lock); - drm_gem_lru_init(&priv->lru.pinned, &priv->lru.lock); - drm_gem_lru_init(&priv->lru.willneed, &priv->lru.lock); - drm_gem_lru_init(&priv->lru.dontneed, &priv->lru.lock); + drm_gem_lru_init(&priv->lru.unbacked); + drm_gem_lru_init(&priv->lru.pinned); + drm_gem_lru_init(&priv->lru.willneed); + drm_gem_lru_init(&priv->lru.dontneed); /* Initialize stall-on-fault */ spin_lock_init(&priv->fault_stall_lock); @@ -140,7 +139,7 @@ static int msm_drm_init(struct device *dev, const struct drm_driver *drv, /* Teach lockdep about lock ordering wrt. shrinker: */ fs_reclaim_acquire(GFP_KERNEL); - might_lock(&priv->lru.lock); + might_lock(&ddev->gem_lru_mutex); fs_reclaim_release(GFP_KERNEL); if (priv->kms_init) { diff --git a/drivers/gpu/drm/msm/msm_drv.h b/drivers/gpu/drm/msm/msm_drv.h index 6d847d593f1a..617b3c4b42c0 100644 --- a/drivers/gpu/drm/msm/msm_drv.h +++ b/drivers/gpu/drm/msm/msm_drv.h @@ -150,13 +150,6 @@ struct msm_drm_private { * DONTNEED state (ie. can be purged) */ struct drm_gem_lru dontneed; - - /** - * lock: - * - * Protects manipulation of all of the LRUs. - */ - struct mutex lock; } lru; struct notifier_block vmap_notifier; diff --git a/drivers/gpu/drm/msm/msm_gem.c b/drivers/gpu/drm/msm/msm_gem.c index 2cb3ab04f125..efd3d3c9a449 100644 --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -177,11 +177,11 @@ static void update_lru_locked(struct drm_gem_object *obj) static void update_lru(struct drm_gem_object *obj) { - struct msm_drm_private *priv = obj->dev->dev_private; + struct drm_device *dev = obj->dev; - mutex_lock(&priv->lru.lock); + mutex_lock(&dev->gem_lru_mutex); update_lru_locked(obj); - mutex_unlock(&priv->lru.lock); + mutex_unlock(&dev->gem_lru_mutex); } static struct page **get_pages(struct drm_gem_object *obj) @@ -292,11 +292,11 @@ void msm_gem_pin_obj_locked(struct drm_gem_object *obj) static void pin_obj_locked(struct drm_gem_object *obj) { - struct msm_drm_private *priv = obj->dev->dev_private; + struct drm_device *dev = obj->dev; - mutex_lock(&priv->lru.lock); + mutex_lock(&dev->gem_lru_mutex); msm_gem_pin_obj_locked(obj); - mutex_unlock(&priv->lru.lock); + mutex_unlock(&dev->gem_lru_mutex); } struct page **msm_gem_pin_pages_locked(struct drm_gem_object *obj) @@ -487,16 +487,16 @@ int msm_gem_pin_vma_locked(struct drm_gem_object *obj, struct drm_gpuva *vma) void msm_gem_unpin_locked(struct drm_gem_object *obj) { - struct msm_drm_private *priv = obj->dev->dev_private; + struct drm_device *dev = obj->dev; struct msm_gem_object *msm_obj = to_msm_bo(obj); msm_gem_assert_locked(obj); - mutex_lock(&priv->lru.lock); + mutex_lock(&dev->gem_lru_mutex); msm_obj->pin_count--; GEM_WARN_ON(msm_obj->pin_count < 0); update_lru_locked(obj); - mutex_unlock(&priv->lru.lock); + mutex_unlock(&dev->gem_lru_mutex); } /* Special unpin path for use in fence-signaling path, avoiding the need @@ -507,10 +507,10 @@ void msm_gem_unpin_locked(struct drm_gem_object *obj) */ void msm_gem_unpin_active(struct drm_gem_object *obj) { - struct msm_drm_private *priv = obj->dev->dev_private; + struct drm_device *dev = obj->dev; struct msm_gem_object *msm_obj = to_msm_bo(obj); - GEM_WARN_ON(!mutex_is_locked(&priv->lru.lock)); + GEM_WARN_ON(!mutex_is_locked(&dev->gem_lru_mutex)); msm_obj->pin_count--; GEM_WARN_ON(msm_obj->pin_count < 0); @@ -797,12 +797,12 @@ void msm_gem_put_vaddr(struct drm_gem_object *obj) */ int msm_gem_madvise(struct drm_gem_object *obj, unsigned madv) { - struct msm_drm_private *priv = obj->dev->dev_private; + struct drm_device *dev = obj->dev; struct msm_gem_object *msm_obj = to_msm_bo(obj); msm_gem_lock(obj); - mutex_lock(&priv->lru.lock); + mutex_lock(&dev->gem_lru_mutex); if (msm_obj->madv != __MSM_MADV_PURGED) msm_obj->madv = madv; @@ -814,7 +814,7 @@ int msm_gem_madvise(struct drm_gem_object *obj, unsigned madv) */ update_lru_locked(obj); - mutex_unlock(&priv->lru.lock); + mutex_unlock(&dev->gem_lru_mutex); msm_gem_unlock(obj); @@ -824,7 +824,6 @@ int msm_gem_madvise(struct drm_gem_object *obj, unsigned madv) void msm_gem_purge(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; - struct msm_drm_private *priv = obj->dev->dev_private; struct msm_gem_object *msm_obj = to_msm_bo(obj); msm_gem_assert_locked(obj); @@ -839,10 +838,10 @@ void msm_gem_purge(struct drm_gem_object *obj) put_pages(obj); - mutex_lock(&priv->lru.lock); + mutex_lock(&dev->gem_lru_mutex); /* A one-way transition: */ msm_obj->madv = __MSM_MADV_PURGED; - mutex_unlock(&priv->lru.lock); + mutex_unlock(&dev->gem_lru_mutex); drm_gem_free_mmap_offset(obj); diff --git a/drivers/gpu/drm/msm/msm_gem_shrinker.c b/drivers/gpu/drm/msm/msm_gem_shrinker.c index 31fa51a44f86..c07af9602fee 100644 --- a/drivers/gpu/drm/msm/msm_gem_shrinker.c +++ b/drivers/gpu/drm/msm/msm_gem_shrinker.c @@ -186,7 +186,7 @@ msm_gem_shrinker_scan(struct shrinker *shrinker, struct shrink_control *sc) if (!stages[i].cond) continue; stages[i].freed = - drm_gem_lru_scan(stages[i].lru, nr, + drm_gem_lru_scan(priv->dev, stages[i].lru, nr, &stages[i].remaining, stages[i].shrink, &ticket); @@ -255,7 +255,7 @@ msm_gem_shrinker_vmap(struct notifier_block *nb, unsigned long event, void *ptr) unsigned long remaining = 0; for (idx = 0; lrus[idx] && unmapped < vmap_shrink_limit; idx++) { - unmapped += drm_gem_lru_scan(lrus[idx], + unmapped += drm_gem_lru_scan(priv->dev, lrus[idx], vmap_shrink_limit - unmapped, &remaining, vmap_shrink, diff --git a/drivers/gpu/drm/msm/msm_gem_submit.c b/drivers/gpu/drm/msm/msm_gem_submit.c index 26ea8a28be47..3c6bc90c3d48 100644 --- a/drivers/gpu/drm/msm/msm_gem_submit.c +++ b/drivers/gpu/drm/msm/msm_gem_submit.c @@ -352,7 +352,7 @@ static int submit_fence_sync(struct msm_gem_submit *submit) static int submit_pin_objects(struct msm_gem_submit *submit) { - struct msm_drm_private *priv = submit->dev->dev_private; + struct drm_device *dev = submit->dev; int i, ret = 0; for (i = 0; i < submit->nr_bos; i++) { @@ -381,11 +381,11 @@ static int submit_pin_objects(struct msm_gem_submit *submit) * get_pages() which could trigger reclaim.. and if we held the LRU lock * could trigger deadlock with the shrinker). */ - mutex_lock(&priv->lru.lock); + mutex_lock(&dev->gem_lru_mutex); for (i = 0; i < submit->nr_bos; i++) { msm_gem_pin_obj_locked(submit->bos[i].obj); } - mutex_unlock(&priv->lru.lock); + mutex_unlock(&dev->gem_lru_mutex); submit->bos_pinned = true; diff --git a/drivers/gpu/drm/msm/msm_gem_vma.c b/drivers/gpu/drm/msm/msm_gem_vma.c index 1a952b171ed7..c4cfe036066b 100644 --- a/drivers/gpu/drm/msm/msm_gem_vma.c +++ b/drivers/gpu/drm/msm/msm_gem_vma.c @@ -702,7 +702,7 @@ static struct dma_fence * msm_vma_job_run(struct drm_sched_job *_job) { struct msm_vm_bind_job *job = to_msm_vm_bind_job(_job); - struct msm_drm_private *priv = job->vm->drm->dev_private; + struct drm_device *dev = job->vm->drm; struct msm_gem_vm *vm = to_msm_vm(job->vm); struct drm_gem_object *obj; int ret = vm->unusable ? -EINVAL : 0; @@ -745,13 +745,13 @@ msm_vma_job_run(struct drm_sched_job *_job) if (ret) msm_gem_vm_unusable(job->vm); - mutex_lock(&priv->lru.lock); + mutex_lock(&dev->gem_lru_mutex); job_foreach_bo (obj, job) { msm_gem_unpin_active(obj); } - mutex_unlock(&priv->lru.lock); + mutex_unlock(&dev->gem_lru_mutex); /* VM_BIND ops are synchronous, so no fence to wait on: */ return NULL; @@ -1305,7 +1305,7 @@ vm_bind_job_pin_objects(struct msm_vm_bind_job *job) return PTR_ERR(pages); } - struct msm_drm_private *priv = job->vm->drm->dev_private; + struct drm_device *dev = job->vm->drm; /* * A second loop while holding the LRU lock (a) avoids acquiring/dropping @@ -1314,10 +1314,10 @@ vm_bind_job_pin_objects(struct msm_vm_bind_job *job) * get_pages() which could trigger reclaim.. and if we held the LRU lock * could trigger deadlock with the shrinker). */ - mutex_lock(&priv->lru.lock); + mutex_lock(&dev->gem_lru_mutex); job_foreach_bo (obj, job) msm_gem_pin_obj_locked(obj); - mutex_unlock(&priv->lru.lock); + mutex_unlock(&dev->gem_lru_mutex); job->bos_pinned = true; diff --git a/drivers/gpu/drm/msm/msm_ringbuffer.c b/drivers/gpu/drm/msm/msm_ringbuffer.c index 30ddb5351e98..2d6b930b766e 100644 --- a/drivers/gpu/drm/msm/msm_ringbuffer.c +++ b/drivers/gpu/drm/msm/msm_ringbuffer.c @@ -16,13 +16,13 @@ static struct dma_fence *msm_job_run(struct drm_sched_job *job) struct msm_gem_submit *submit = to_msm_submit(job); struct msm_fence_context *fctx = submit->ring->fctx; struct msm_gpu *gpu = submit->gpu; - struct msm_drm_private *priv = gpu->dev->dev_private; + struct drm_device *dev = gpu->dev; unsigned nr_cmds = submit->nr_cmds; int i; msm_fence_init(submit->hw_fence, fctx); - mutex_lock(&priv->lru.lock); + mutex_lock(&dev->gem_lru_mutex); for (i = 0; i < submit->nr_bos; i++) { struct drm_gem_object *obj = submit->bos[i].obj; @@ -32,7 +32,7 @@ static struct dma_fence *msm_job_run(struct drm_sched_job *job) submit->bos_pinned = false; - mutex_unlock(&priv->lru.lock); + mutex_unlock(&dev->gem_lru_mutex); /* TODO move submit path over to using a per-ring lock.. */ mutex_lock(&gpu->lock); diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h index bc78fb77cc27..768a8dae83c5 100644 --- a/include/drm/drm_device.h +++ b/include/drm/drm_device.h @@ -375,6 +375,13 @@ struct drm_device { * Root directory for debugfs files. */ struct dentry *debugfs_root; + + /** + * @gem_lru_mutex: + * + * Lock protecting movement of GEM objects between LRUs. + */ + struct mutex gem_lru_mutex; }; void drm_dev_set_dma_dev(struct drm_device *dev, struct device *dma_dev); diff --git a/include/drm/drm_gem.h b/include/drm/drm_gem.h index 86f5846154f7..8a704f6a65c1 100644 --- a/include/drm/drm_gem.h +++ b/include/drm/drm_gem.h @@ -245,17 +245,11 @@ struct drm_gem_object_funcs { * for lockless &shrinker.count_objects, and provides * &drm_gem_lru_scan for driver's &shrinker.scan_objects * implementation. + * + * Any access to this kind of object must be done with + * drm_device::gem_lru_mutex held. */ struct drm_gem_lru { - /** - * @lock: - * - * Lock protecting movement of GEM objects between LRUs. All - * LRUs that the object can move between should be protected - * by the same lock. - */ - struct mutex *lock; - /** * @count: * @@ -453,6 +447,9 @@ struct drm_gem_object { * @lru: * * The current LRU list that the GEM object is on. + * + * Access to this field must be done with drm_device::gem_lru_mutex + * held. */ struct drm_gem_lru *lru; }; @@ -610,12 +607,13 @@ void drm_gem_unlock_reservations(struct drm_gem_object **objs, int count, int drm_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev, u32 handle, u64 *offset); -void drm_gem_lru_init(struct drm_gem_lru *lru, struct mutex *lock); +void drm_gem_lru_init(struct drm_gem_lru *lru); void drm_gem_lru_remove(struct drm_gem_object *obj); void drm_gem_lru_move_tail_locked(struct drm_gem_lru *lru, struct drm_gem_object *obj); void drm_gem_lru_move_tail(struct drm_gem_lru *lru, struct drm_gem_object *obj); unsigned long -drm_gem_lru_scan(struct drm_gem_lru *lru, +drm_gem_lru_scan(struct drm_device *dev, + struct drm_gem_lru *lru, unsigned int nr_to_scan, unsigned long *remaining, bool (*shrink)(struct drm_gem_object *obj, struct ww_acquire_ctx *ticket), -- cgit v1.2.3 From 6eb0168d091404bee11d1f0712515d77b8d01579 Mon Sep 17 00:00:00 2001 From: Michal Wajdeczko Date: Mon, 11 May 2026 19:28:37 +0200 Subject: drm/xe/memirq: Update interrupt handler logic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To workaround some corner case hardware limitations, new programming note for the memory based interrupt handler suggests to assume that some status bytes, like GT_MI_USER_INTERRUPT and GUC_INTR_GUC2HOST, are always set. Update our interrupt handler to follow the new rules. Bspec: 53672 Fixes: a6581ebe7685 ("drm/xe/vf: Introduce Memory Based Interrupts Handler") Signed-off-by: Michal Wajdeczko Cc: Rodrigo Vivi Cc: Matthew Brost Reviewed-by: Michał Winiarski Link: https://patch.msgid.link/20260511172838.2299-2-michal.wajdeczko@intel.com (cherry picked from commit 284f4cae4579eed9dd4406f18a6c1becc69f8931) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_memirq.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_memirq.c b/drivers/gpu/drm/xe/xe_memirq.c index 811e07136efb..579af47edc61 100644 --- a/drivers/gpu/drm/xe/xe_memirq.c +++ b/drivers/gpu/drm/xe/xe_memirq.c @@ -427,13 +427,25 @@ static bool memirq_received(struct xe_memirq *memirq, struct iosys_map *vector, return __memirq_received(memirq, vector, offset, name, true); } +static void memirq_assume_received(struct xe_memirq *memirq, const char *source, + u16 offset, const char *status) +{ + memirq_debug(memirq, "ASSUME %s %s(%u)\n", source, status, offset); +} + static void memirq_dispatch_engine(struct xe_memirq *memirq, struct iosys_map *status, struct xe_hw_engine *hwe) { memirq_debug(memirq, "STATUS %s %*ph\n", hwe->name, 16, status->vaddr); - if (memirq_received(memirq, status, ilog2(GT_MI_USER_INTERRUPT), hwe->name)) - xe_hw_engine_handle_irq(hwe, GT_MI_USER_INTERRUPT); + /* + * The programming note says to assume that GT_MI_USER_INTERRUPT is always + * set. Check and clear related status byte just for a debug. + */ + if (IS_ENABLED(CONFIG_DRM_XE_DEBUG_MEMIRQ) && + !memirq_received(memirq, status, ilog2(GT_MI_USER_INTERRUPT), hwe->name)) + memirq_assume_received(memirq, hwe->name, ilog2(GT_MI_USER_INTERRUPT), "USER"); + xe_hw_engine_handle_irq(hwe, GT_MI_USER_INTERRUPT); } static void memirq_dispatch_guc(struct xe_memirq *memirq, struct iosys_map *status, @@ -443,8 +455,14 @@ static void memirq_dispatch_guc(struct xe_memirq *memirq, struct iosys_map *stat memirq_debug(memirq, "STATUS %s %*ph\n", name, 16, status->vaddr); - if (memirq_received(memirq, status, ilog2(GUC_INTR_GUC2HOST), name)) - xe_guc_irq_handler(guc, GUC_INTR_GUC2HOST); + /* + * The programming note says to assume that GUC_INTR_GUC2HOST is always + * set. Check and clear related status byte just for a debug. + */ + if (IS_ENABLED(CONFIG_DRM_XE_DEBUG_MEMIRQ) && + !memirq_received(memirq, status, ilog2(GUC_INTR_GUC2HOST), name)) + memirq_assume_received(memirq, name, ilog2(GUC_INTR_GUC2HOST), "GUC2HOST"); + xe_guc_irq_handler(guc, GUC_INTR_GUC2HOST); /* * This is a software interrupt that must be cleared after it's consumed -- cgit v1.2.3 From d3ded53fab90996e7d94a39049e11962dd066725 Mon Sep 17 00:00:00 2001 From: Shuicheng Lin Date: Mon, 11 May 2026 15:41:34 +0000 Subject: drm/xe/gsc: Fix double-free of managed BO in error path The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO allocated with xe_managed_bo_create_pin_map() via xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm cleanup action registered, this causes a double-free when devm unwinds during probe failure. Remove the explicit free and let devm handle it, consistent with all other xe_managed_bo_create_pin_map() callers. Fixes: 2e5d47fe7839 ("drm/xe/uc: Use managed bo for HuC and GSC objects") Reviewed-by: Daniele Ceraolo Spurio Assisted-by: Claude:claude-opus-4.6 Link: https://patch.msgid.link/20260511154134.223696-1-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin (cherry picked from commit 71d61e3e299a17139e47f980a4d6f425b2c59bf7) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_gsc.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_gsc.c b/drivers/gpu/drm/xe/xe_gsc.c index 0d13e357fb43..aab59dc647fb 100644 --- a/drivers/gpu/drm/xe/xe_gsc.c +++ b/drivers/gpu/drm/xe/xe_gsc.c @@ -482,8 +482,7 @@ int xe_gsc_init_post_hwconfig(struct xe_gsc *gsc) EXEC_QUEUE_FLAG_PERMANENT, 0); if (IS_ERR(q)) { xe_gt_err(gt, "Failed to create queue for GSC submission\n"); - err = PTR_ERR(q); - goto out_bo; + return PTR_ERR(q); } wq = alloc_ordered_workqueue("gsc-ordered-wq", 0); @@ -506,8 +505,6 @@ int xe_gsc_init_post_hwconfig(struct xe_gsc *gsc) out_q: xe_exec_queue_put(q); -out_bo: - xe_bo_unpin_map_no_vm(bo); return err; } -- cgit v1.2.3 From 9bb2f1d7e6e58b8e434ddc2048c661bf87ccdf2a Mon Sep 17 00:00:00 2001 From: Michal Wajdeczko Date: Thu, 14 May 2026 17:57:26 +0200 Subject: drm/xe/vf: Fix signature of print functions We have plugged-in existing VF print functions into our GT debugfs show helper as-is, but we missed that the helper expects functions to return int, while they were defined as void. This can lead to errors being reported when CFI is enabled. Fixes: 63d8cb8fe3dd ("drm/xe/vf: Expose SR-IOV VF attributes to GT debugfs") Signed-off-by: Michal Wajdeczko Cc: Mohanram Meenakshisundaram Reviewed-by: Shuicheng Lin Link: https://patch.msgid.link/20260514155726.7165-1-michal.wajdeczko@intel.com (cherry picked from commit 314e31c9a8a1c421ee4f7f755b9348aefbbca090) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_gt_sriov_vf.c | 24 ++++++++++++++++++------ drivers/gpu/drm/xe/xe_gt_sriov_vf.h | 6 +++--- 2 files changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_gt_sriov_vf.c b/drivers/gpu/drm/xe/xe_gt_sriov_vf.c index 8989c8e1be95..0cd9d77f3351 100644 --- a/drivers/gpu/drm/xe/xe_gt_sriov_vf.c +++ b/drivers/gpu/drm/xe/xe_gt_sriov_vf.c @@ -1137,13 +1137,15 @@ void xe_gt_sriov_vf_write32(struct xe_gt *gt, struct xe_reg reg, u32 val) } /** - * xe_gt_sriov_vf_print_config - Print VF self config. + * xe_gt_sriov_vf_print_config() - Print VF self config. * @gt: the &xe_gt * @p: the &drm_printer * * This function is for VF use only. + * + * Return: always 0. */ -void xe_gt_sriov_vf_print_config(struct xe_gt *gt, struct drm_printer *p) +int xe_gt_sriov_vf_print_config(struct xe_gt *gt, struct drm_printer *p) { struct xe_gt_sriov_vf_selfconfig *config = >->sriov.vf.self_config; struct xe_device *xe = gt_to_xe(gt); @@ -1170,16 +1172,20 @@ void xe_gt_sriov_vf_print_config(struct xe_gt *gt, struct drm_printer *p) drm_printf(p, "GuC contexts:\t%u\n", config->num_ctxs); drm_printf(p, "GuC doorbells:\t%u\n", config->num_dbs); + + return 0; } /** - * xe_gt_sriov_vf_print_runtime - Print VF's runtime regs received from PF. + * xe_gt_sriov_vf_print_runtime() - Print VF's runtime regs received from PF. * @gt: the &xe_gt * @p: the &drm_printer * * This function is for VF use only. + * + * Return: always 0. */ -void xe_gt_sriov_vf_print_runtime(struct xe_gt *gt, struct drm_printer *p) +int xe_gt_sriov_vf_print_runtime(struct xe_gt *gt, struct drm_printer *p) { struct vf_runtime_reg *vf_regs = gt->sriov.vf.runtime.regs; unsigned int size = gt->sriov.vf.runtime.num_regs; @@ -1188,16 +1194,20 @@ void xe_gt_sriov_vf_print_runtime(struct xe_gt *gt, struct drm_printer *p) for (; size--; vf_regs++) drm_printf(p, "%#x = %#x\n", vf_regs->offset, vf_regs->value); + + return 0; } /** - * xe_gt_sriov_vf_print_version - Print VF ABI versions. + * xe_gt_sriov_vf_print_version() - Print VF ABI versions. * @gt: the &xe_gt * @p: the &drm_printer * * This function is for VF use only. + * + * Return: always 0. */ -void xe_gt_sriov_vf_print_version(struct xe_gt *gt, struct drm_printer *p) +int xe_gt_sriov_vf_print_version(struct xe_gt *gt, struct drm_printer *p) { struct xe_device *xe = gt_to_xe(gt); struct xe_uc_fw_version *guc_version = >->sriov.vf.guc_version; @@ -1227,6 +1237,8 @@ void xe_gt_sriov_vf_print_version(struct xe_gt *gt, struct drm_printer *p) GUC_RELAY_VERSION_LATEST_MAJOR, GUC_RELAY_VERSION_LATEST_MINOR); drm_printf(p, "\thandshake:\t%u.%u\n", pf_version->major, pf_version->minor); + + return 0; } static bool vf_post_migration_shutdown(struct xe_gt *gt) diff --git a/drivers/gpu/drm/xe/xe_gt_sriov_vf.h b/drivers/gpu/drm/xe/xe_gt_sriov_vf.h index a6f7127521a5..79878f21b1da 100644 --- a/drivers/gpu/drm/xe/xe_gt_sriov_vf.h +++ b/drivers/gpu/drm/xe/xe_gt_sriov_vf.h @@ -35,9 +35,9 @@ bool xe_gt_sriov_vf_sched_groups_enabled(struct xe_gt *gt); u32 xe_gt_sriov_vf_read32(struct xe_gt *gt, struct xe_reg reg); void xe_gt_sriov_vf_write32(struct xe_gt *gt, struct xe_reg reg, u32 val); -void xe_gt_sriov_vf_print_config(struct xe_gt *gt, struct drm_printer *p); -void xe_gt_sriov_vf_print_runtime(struct xe_gt *gt, struct drm_printer *p); -void xe_gt_sriov_vf_print_version(struct xe_gt *gt, struct drm_printer *p); +int xe_gt_sriov_vf_print_config(struct xe_gt *gt, struct drm_printer *p); +int xe_gt_sriov_vf_print_runtime(struct xe_gt *gt, struct drm_printer *p); +int xe_gt_sriov_vf_print_version(struct xe_gt *gt, struct drm_printer *p); int xe_gt_sriov_vf_wait_valid_ggtt(struct xe_gt *gt); int xe_vf_migration_fixups_complete_count(struct xe_gt *gt); -- cgit v1.2.3 From 96bf49b526e2d03a2b7f6e861925a08f46ed0d28 Mon Sep 17 00:00:00 2001 From: Mohanram Meenakshisundaram Date: Thu, 14 May 2026 23:19:18 +0530 Subject: drm/xe/pf: Fix CFI failure in debugfs access Reading debugfs file (/sys/kernel/debug/dri/0/gt*/pf/adverse_events) with CFI (Control Flow Integrity) enabled, the kernel panics at xe_gt_debugfs_simple_show+0x82/0xc0. xe_gt_debugfs_simple_show() declare a function pointer expecting int return type, but xe_gt_sriov_pf_monitor_print_events() is void return type, leading to CFI failure and kernel panic. [507620.973657] CFI failure at xe_gt_debugfs_simple_show+0x82/0xc0 [xe] (target: xe_gt_sriov_pf_monitor_print_events+0x0/0x130 [xe]; expected type: 0xd72c7139) Fix xe_gt_sriov_pf_monitor_print_events() function by updating to return an int type. Fixes: 1c99d3d3edab ("drm/xe/pf: Expose PF monitor details via debugfs") Signed-off-by: Mohanram Meenakshisundaram Reviewed-by: Michal Wajdeczko Signed-off-by: Michal Wajdeczko Link: https://patch.msgid.link/20260514174918.1556357-2-mohanram.meenakshisundaram@intel.com (cherry picked from commit ff1d386a8359746d9699ac30336e3b0684c68958) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.c | 6 +++++- drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.h | 2 +- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.c b/drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.c index 7d532bded02a..a85ba4435378 100644 --- a/drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.c +++ b/drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.c @@ -114,8 +114,10 @@ int xe_gt_sriov_pf_monitor_process_guc2pf(struct xe_gt *gt, const u32 *msg, u32 * VFs with no events are not printed. * * This function can only be called on PF. + * + * Return: always 0 */ -void xe_gt_sriov_pf_monitor_print_events(struct xe_gt *gt, struct drm_printer *p) +int xe_gt_sriov_pf_monitor_print_events(struct xe_gt *gt, struct drm_printer *p) { unsigned int n, total_vfs = xe_gt_sriov_pf_get_totalvfs(gt); const struct xe_gt_sriov_monitor *data; @@ -144,4 +146,6 @@ void xe_gt_sriov_pf_monitor_print_events(struct xe_gt *gt, struct drm_printer *p #undef __format #undef __value } + + return 0; } diff --git a/drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.h b/drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.h index 7ca9351a271b..0b8f088d3a16 100644 --- a/drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.h +++ b/drivers/gpu/drm/xe/xe_gt_sriov_pf_monitor.h @@ -13,7 +13,7 @@ struct drm_printer; struct xe_gt; void xe_gt_sriov_pf_monitor_flr(struct xe_gt *gt, u32 vfid); -void xe_gt_sriov_pf_monitor_print_events(struct xe_gt *gt, struct drm_printer *p); +int xe_gt_sriov_pf_monitor_print_events(struct xe_gt *gt, struct drm_printer *p); #ifdef CONFIG_PCI_IOV int xe_gt_sriov_pf_monitor_process_guc2pf(struct xe_gt *gt, const u32 *msg, u32 len); -- cgit v1.2.3 From 16be14eec5fdaea9477368856a85173246c41454 Mon Sep 17 00:00:00 2001 From: Gustavo Sousa Date: Thu, 14 May 2026 18:44:44 -0300 Subject: drm/xe: Define CACHE_MODE_1 as MCR register CACHE_MODE_1 is a MCR register for all platforms that currently use it in the Xe driver. Use XE_REG_MCR() when defining it. Fixes: 8cd7e9759766 ("drm/xe: Add missing DG2 lrc workarounds") Fixes: ff063430caa8 ("drm/xe/mtl: Add some initial MTL workarounds") Bspec: 66534, 67788 Reviewed-by: Matt Roper Link: https://patch.msgid.link/20260514-rtp-mcr-check-v3-1-30dd47855fee@intel.com Signed-off-by: Gustavo Sousa (cherry picked from commit 8f765f0c054e0fb39980a76b4c899b027395929d) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/regs/xe_gt_regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/regs/xe_gt_regs.h b/drivers/gpu/drm/xe/regs/xe_gt_regs.h index 9c88ca3ce768..4399518c270e 100644 --- a/drivers/gpu/drm/xe/regs/xe_gt_regs.h +++ b/drivers/gpu/drm/xe/regs/xe_gt_regs.h @@ -152,7 +152,7 @@ #define XEHPG_INSTDONE_GEOM_SVGUNIT XE_REG_MCR(0x666c) -#define CACHE_MODE_1 XE_REG(0x7004, XE_REG_OPTION_MASKED) +#define CACHE_MODE_1 XE_REG_MCR(0x7004, XE_REG_OPTION_MASKED) #define MSAA_OPTIMIZATION_REDUC_DISABLE REG_BIT(11) #define COMMON_SLICE_CHICKEN1 XE_REG(0x7010, XE_REG_OPTION_MASKED) -- cgit v1.2.3 From a4660bd949733fd6ea621fdb50fabac2608155e9 Mon Sep 17 00:00:00 2001 From: Gustavo Sousa Date: Thu, 14 May 2026 18:44:45 -0300 Subject: drm/xe: Define and use MCR version of COMMON_SLICE_CHICKEN1 The register COMMON_SLICE_CHICKEN1 is a MCR register on Xe2. Let's make sure to define a MCR version of it and use it for the relevant IP versions. Use XEHP_ as prefix for the register name, since it is MCR as of Xe_HP. Fixes: a5d221924e13 ("drm/xe/xe2_hpg: Add set of workarounds") Fixes: 9f18b55b6d3f ("drm/xe/xe2: Add workaround 18033852989") Bspec: 66534, 71185 Reviewed-by: Matt Roper Link: https://patch.msgid.link/20260514-rtp-mcr-check-v3-2-30dd47855fee@intel.com Signed-off-by: Gustavo Sousa (cherry picked from commit a672725fdbfc3ea430130039d677c7dc98d59df8) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/regs/xe_gt_regs.h | 1 + drivers/gpu/drm/xe/xe_wa.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/xe/regs/xe_gt_regs.h b/drivers/gpu/drm/xe/regs/xe_gt_regs.h index 4399518c270e..ed9aba5bf75e 100644 --- a/drivers/gpu/drm/xe/regs/xe_gt_regs.h +++ b/drivers/gpu/drm/xe/regs/xe_gt_regs.h @@ -156,6 +156,7 @@ #define MSAA_OPTIMIZATION_REDUC_DISABLE REG_BIT(11) #define COMMON_SLICE_CHICKEN1 XE_REG(0x7010, XE_REG_OPTION_MASKED) +#define XEHP_COMMON_SLICE_CHICKEN1 XE_REG_MCR(0x7010, XE_REG_OPTION_MASKED) #define DISABLE_BOTTOM_CLIP_RECTANGLE_TEST REG_BIT(14) #define HIZ_CHICKEN XE_REG(0x7018, XE_REG_OPTION_MASKED) diff --git a/drivers/gpu/drm/xe/xe_wa.c b/drivers/gpu/drm/xe/xe_wa.c index 4b1cbced06be..100569a62283 100644 --- a/drivers/gpu/drm/xe/xe_wa.c +++ b/drivers/gpu/drm/xe/xe_wa.c @@ -651,7 +651,7 @@ static const struct xe_rtp_entry_sr lrc_was[] = { }, { XE_RTP_NAME("18033852989"), XE_RTP_RULES(GRAPHICS_VERSION_RANGE(2001, 2004), ENGINE_CLASS(RENDER)), - XE_RTP_ACTIONS(SET(COMMON_SLICE_CHICKEN1, DISABLE_BOTTOM_CLIP_RECTANGLE_TEST)) + XE_RTP_ACTIONS(SET(XEHP_COMMON_SLICE_CHICKEN1, DISABLE_BOTTOM_CLIP_RECTANGLE_TEST)) }, { XE_RTP_NAME("15016589081"), XE_RTP_RULES(GRAPHICS_VERSION_RANGE(2001, 2004), ENGINE_CLASS(RENDER)), -- cgit v1.2.3 From 6df5678b6a94ac80e31e847074c4b30c21025b1f Mon Sep 17 00:00:00 2001 From: Gustavo Sousa Date: Thu, 14 May 2026 18:44:46 -0300 Subject: drm/xe: Define and use MCR version of COMMON_SLICE_CHICKEN4 The register COMMON_SLICE_CHICKEN4 is a MCR register on both Xe2 and Xe3. Let's make sure to define a MCR version of it and use it for the relevant IP versions. Use XEHP_ as prefix for the register name, since it is MCR as of Xe_HP. v2: - Also change for one entry in lrc_tunnings, which was caught by manual testing and add corresponging Fixes tag in commit message. (Gustavo) Fixes: 8d6f16f1f082 ("drm/xe: Extend Wa_22021007897 to Xe3 platforms") Fixes: e5c13e2c505b ("drm/xe/xe2hpg: Add Wa_22021007897") Fixes: 8ccf5f6b2295 ("drm/xe/tuning: Apply windower hardware filtering setting on Xe3 and Xe3p") Bspec: 66534, 71185, 74417 Reviewed-by: Matt Roper Link: https://patch.msgid.link/20260514-rtp-mcr-check-v3-3-30dd47855fee@intel.com Signed-off-by: Gustavo Sousa (cherry picked from commit 75f65f1a4c06da1d87f28570a9d4cdad28f13360) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/regs/xe_gt_regs.h | 1 + drivers/gpu/drm/xe/xe_tuning.c | 2 +- drivers/gpu/drm/xe/xe_wa.c | 4 ++-- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/xe/regs/xe_gt_regs.h b/drivers/gpu/drm/xe/regs/xe_gt_regs.h index ed9aba5bf75e..353fe0bd49bf 100644 --- a/drivers/gpu/drm/xe/regs/xe_gt_regs.h +++ b/drivers/gpu/drm/xe/regs/xe_gt_regs.h @@ -179,6 +179,7 @@ #define XEHPG_SC_INSTDONE_EXTRA2 XE_REG_MCR(0x7108) #define COMMON_SLICE_CHICKEN4 XE_REG(0x7300, XE_REG_OPTION_MASKED) +#define XEHP_COMMON_SLICE_CHICKEN4 XE_REG_MCR(0x7300, XE_REG_OPTION_MASKED) #define SBE_PUSH_CONSTANT_BEHIND_FIX_ENABLE REG_BIT(12) #define DISABLE_TDC_LOAD_BALANCING_CALC REG_BIT(6) #define HW_FILTERING REG_BIT(5) diff --git a/drivers/gpu/drm/xe/xe_tuning.c b/drivers/gpu/drm/xe/xe_tuning.c index 0b78ec2bc6a4..fcb6698abc6e 100644 --- a/drivers/gpu/drm/xe/xe_tuning.c +++ b/drivers/gpu/drm/xe/xe_tuning.c @@ -129,7 +129,7 @@ static const struct xe_rtp_entry_sr engine_tunings[] = { static const struct xe_rtp_entry_sr lrc_tunings[] = { { XE_RTP_NAME("Tuning: Windower HW Filtering"), XE_RTP_RULES(GRAPHICS_VERSION_RANGE(3000, 3599), ENGINE_CLASS(RENDER)), - XE_RTP_ACTIONS(SET(COMMON_SLICE_CHICKEN4, HW_FILTERING)) + XE_RTP_ACTIONS(SET(XEHP_COMMON_SLICE_CHICKEN4, HW_FILTERING)) }, /* DG2 */ diff --git a/drivers/gpu/drm/xe/xe_wa.c b/drivers/gpu/drm/xe/xe_wa.c index 100569a62283..33df43d0bede 100644 --- a/drivers/gpu/drm/xe/xe_wa.c +++ b/drivers/gpu/drm/xe/xe_wa.c @@ -754,7 +754,7 @@ static const struct xe_rtp_entry_sr lrc_was[] = { }, { XE_RTP_NAME("22021007897"), XE_RTP_RULES(GRAPHICS_VERSION_RANGE(2001, 2002), ENGINE_CLASS(RENDER)), - XE_RTP_ACTIONS(SET(COMMON_SLICE_CHICKEN4, SBE_PUSH_CONSTANT_BEHIND_FIX_ENABLE)) + XE_RTP_ACTIONS(SET(XEHP_COMMON_SLICE_CHICKEN4, SBE_PUSH_CONSTANT_BEHIND_FIX_ENABLE)) }, /* Xe3_LPG */ @@ -770,7 +770,7 @@ static const struct xe_rtp_entry_sr lrc_was[] = { }, { XE_RTP_NAME("22021007897"), XE_RTP_RULES(GRAPHICS_VERSION_RANGE(3000, 3005), ENGINE_CLASS(RENDER)), - XE_RTP_ACTIONS(SET(COMMON_SLICE_CHICKEN4, SBE_PUSH_CONSTANT_BEHIND_FIX_ENABLE)) + XE_RTP_ACTIONS(SET(XEHP_COMMON_SLICE_CHICKEN4, SBE_PUSH_CONSTANT_BEHIND_FIX_ENABLE)) }, { XE_RTP_NAME("14024681466"), XE_RTP_RULES(GRAPHICS_VERSION_RANGE(3000, 3005), ENGINE_CLASS(RENDER)), -- cgit v1.2.3 From 2a2451a34afdf563b3102d36a4b6cf335cf813e2 Mon Sep 17 00:00:00 2001 From: Matthew Leach Date: Fri, 24 Apr 2026 10:50:35 +0100 Subject: wifi: ath11k: fix peer resolution on rx path when peer_id=0 It has been observed that on certain chipsets a peer can be assigned peer_id=0. For reception of non-aggregated MPDUs this is fine as ath11k_dp_rx_h_find_peer() has a fallback case where it locates the peer based upon the source MAC address. On an aggregated link, the mpdu_start header is only populated by hardware on the first sub-MSDU. This causes the peer resolution to be skipped for the subsequent MSDUs and the encryption type of these frames to be set to an incorrect value, resulting in these MSDUs being dropped by ieee80211. ath11k_pci 0000:03:00.0: data rx skb 000000002f4b704d len 1534 peer xx:xx:xx:xx:xx:xx 0 ucast sn 3063 he160 rate_idx 9 vht_nss 2 freq 5240 band 1 flag 0x40d1a fcs-err 0 mic-err 0 amsdu-more 0 peer_id 0 first_msdu 1 last_msdu 0 ath11k_pci 0000:03:00.0: data rx skb 0000000038acd580 len 1534 peer (null) 0 ucast sn 3063 he160 rate_idx 9 vht_nss 2 freq 5240 band 1 flag 0x40d00 fcs-err 0 mic-err 0 amsdu-more 0 peer_id 0 first_msdu 0 last_msdu 1 Remove the null peer_id checks in ath11k_dp_rx_h_find_peer() and ath11k_hal_rx_parse_mon_status_tlv(), allowing peers with an assigned ID of 0 to be resolved. Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.9 Fixes: 2167fa606c0f ("ath11k: Add support for RX decapsulation offload") Reviewed-by: Baochen Qiang Signed-off-by: Matthew Leach Reviewed-by: P Praneesh Link: https://patch.msgid.link/20260424-ath11k-null-peerid-workaround-v4-1-252b224d3cf6@collabora.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath11k/dp_rx.c | 3 +-- drivers/net/wireless/ath/ath11k/hal_rx.c | 5 +---- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c index fe79109adc70..72d5d933656d 100644 --- a/drivers/net/wireless/ath/ath11k/dp_rx.c +++ b/drivers/net/wireless/ath/ath11k/dp_rx.c @@ -2214,8 +2214,7 @@ ath11k_dp_rx_h_find_peer(struct ath11k_base *ab, struct sk_buff *msdu) lockdep_assert_held(&ab->base_lock); - if (rxcb->peer_id) - peer = ath11k_peer_find_by_id(ab, rxcb->peer_id); + peer = ath11k_peer_find_by_id(ab, rxcb->peer_id); if (peer) return peer; diff --git a/drivers/net/wireless/ath/ath11k/hal_rx.c b/drivers/net/wireless/ath/ath11k/hal_rx.c index 753bd93f0212..51e0840bc0d1 100644 --- a/drivers/net/wireless/ath/ath11k/hal_rx.c +++ b/drivers/net/wireless/ath/ath11k/hal_rx.c @@ -1467,11 +1467,8 @@ ath11k_hal_rx_parse_mon_status_tlv(struct ath11k_base *ab, case HAL_RX_MPDU_START: { struct hal_rx_mpdu_info *mpdu_info = (struct hal_rx_mpdu_info *)tlv_data; - u16 peer_id; - peer_id = ath11k_hal_rx_mpduinfo_get_peerid(ab, mpdu_info); - if (peer_id) - ppdu_info->peer_id = peer_id; + ppdu_info->peer_id = ath11k_hal_rx_mpduinfo_get_peerid(ab, mpdu_info); break; } case HAL_RXPCU_PPDU_END_INFO: { -- cgit v1.2.3 From 72b8654e3b83548f64524add2e9145e9b6c8a852 Mon Sep 17 00:00:00 2001 From: Willmar Knikker Date: Tue, 5 May 2026 17:17:43 +0000 Subject: wifi: ath11k: fix use after free in ath11k_dp_rx_msdu_coalesce() In ath11k_dp_rx_msdu_coalesce() the loop uses ->is_continuation after the dev_kfree_skb_any(). This can cause a use after free kfence. Use flag for caching is_continuation for use after the dev_kfree_skb_any(). Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Willmar Knikker Reviewed-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260505171709.547274-1-willmar@met-dubbel-l.nl Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath11k/dp_rx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c index 72d5d933656d..2a413e3a07a7 100644 --- a/drivers/net/wireless/ath/ath11k/dp_rx.c +++ b/drivers/net/wireless/ath/ath11k/dp_rx.c @@ -1761,6 +1761,7 @@ static int ath11k_dp_rx_msdu_coalesce(struct ath11k *ar, int buf_first_hdr_len, buf_first_len; struct hal_rx_desc *ldesc; int space_extra, rem_len, buf_len; + bool is_continuation; u32 hal_rx_desc_sz = ar->ab->hw_params.hal_desc_sz; /* As the msdu is spread across multiple rx buffers, @@ -1810,7 +1811,8 @@ static int ath11k_dp_rx_msdu_coalesce(struct ath11k *ar, rem_len = msdu_len - buf_first_len; while ((skb = __skb_dequeue(msdu_list)) != NULL && rem_len > 0) { rxcb = ATH11K_SKB_RXCB(skb); - if (rxcb->is_continuation) + is_continuation = rxcb->is_continuation; + if (is_continuation) buf_len = DP_RX_BUFFER_SIZE - hal_rx_desc_sz; else buf_len = rem_len; @@ -1828,7 +1830,7 @@ static int ath11k_dp_rx_msdu_coalesce(struct ath11k *ar, dev_kfree_skb_any(skb); rem_len -= buf_len; - if (!rxcb->is_continuation) + if (!is_continuation) break; } -- cgit v1.2.3 From f51e4b3b5574ad8cb5b16b11f8a1452147ece87a Mon Sep 17 00:00:00 2001 From: Kyle Farnung Date: Wed, 13 May 2026 21:52:12 -0700 Subject: wifi: ath11k: clear shared SRNG pointer state on restart LMAC rings reuse the shared rdp/wrp pointer buffers without going through the normal SRNG hw-init path that zeros non-LMAC ring pointers. After restart, ath11k_hal_srng_clear() can therefore hand stale hp/tp state from the previous firmware instance back to the new one. Clear the shared pointer buffers while keeping the allocations in place so restart still avoids reallocating SRNG DMA memory, but starts with fresh ring-pointer state. Fixes: 32be3ca4cf78b ("wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again") Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/all/CAOPSVF04q6uvVdq8GTRLHBrVMdpt9=o9wVcFMc6f-yhmSBcZqQ@mail.gmail.com/ Signed-off-by: Kyle Farnung Reviewed-by: Rameshkumar Sundaram Reviewed-by: Baochen Qiang Link: https://patch.msgid.link/20260513-kfarnung-ath11k-srng-clear-pointer-state-v1-1-bc700dd8b333@gmail.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath11k/hal.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c index e821e5a62c1c..98bd9e3f0aae 100644 --- a/drivers/net/wireless/ath/ath11k/hal.c +++ b/drivers/net/wireless/ath/ath11k/hal.c @@ -1387,14 +1387,22 @@ EXPORT_SYMBOL(ath11k_hal_srng_deinit); void ath11k_hal_srng_clear(struct ath11k_base *ab) { - /* No need to memset rdp and wrp memory since each individual - * segment would get cleared in ath11k_hal_srng_src_hw_init() - * and ath11k_hal_srng_dst_hw_init(). + /* + * Preserve the shared pointer buffers, but clear the previous + * firmware instance's hp/tp state before handing them back to FW. + * LMAC rings reuse this shared memory without going through the + * normal SRNG hw-init path that zeros non-LMAC ring pointers. */ memset(ab->hal.srng_list, 0, sizeof(ab->hal.srng_list)); memset(ab->hal.shadow_reg_addr, 0, sizeof(ab->hal.shadow_reg_addr)); + if (ab->hal.rdp.vaddr) + memset(ab->hal.rdp.vaddr, 0, + sizeof(*ab->hal.rdp.vaddr) * HAL_SRNG_RING_ID_MAX); + if (ab->hal.wrp.vaddr) + memset(ab->hal.wrp.vaddr, 0, + sizeof(*ab->hal.wrp.vaddr) * HAL_SRNG_NUM_LMAC_RINGS); ab->hal.avail_blk_resource = 0; ab->hal.current_blk_index = 0; ab->hal.num_shadow_reg_configured = 0; -- cgit v1.2.3 From 60fb2cf51e77bb1c0261160b4be44209d68956b1 Mon Sep 17 00:00:00 2001 From: Baochen Qiang Date: Thu, 14 May 2026 11:32:51 +0800 Subject: wifi: ath12k: fix EHT TX MCS limitation due to wrong 20 MHz-only parsing When connecting to an AP configured for EHT 20 MHz with a full EHT MCS/NSS map (supporting MCS 0-13) Supported EHT-MCS and NSS Set EHT-MCS Map (BW <= 80MHz): 0x444444 .... .... .... .... .... 0100 = Rx Max Nss That Supports EHT-MCS 0-9: 4 .... .... .... .... 0100 .... = Tx Max Nss That Supports EHT-MCS 0-9: 4 .... .... .... 0100 .... .... = Rx Max Nss That Supports EHT-MCS 10-11: 4 .... .... 0100 .... .... .... = Tx Max Nss That Supports EHT-MCS 10-11: 4 .... 0100 .... .... .... .... = Rx Max Nss That Supports EHT-MCS 12-13: 4 0100 .... .... .... .... .... = Tx Max Nss That Supports EHT-MCS 12-13: 4 TX throughput is observed to be significantly lower than expected. Investigation shows that TX rates are limited to EHT MCS 11, even though the AP advertises support for EHT MCS 12/13. The root cause is an incorrect parsing of the Supported EHT-MCS and NSS Set element in ath12k_peer_assoc_h_eht(). IEEE Std 802.11be-2024 Figure 9-1074as describes the format for 20 MHz-Only Non-AP STAs. IEEE Std 802.11be-2024 Figure 9-1074at describes the format for all other AP and non-AP STAs. Currently the first format is parsed when the peer advertises no wider HE channel width support, without considering whether it is an AP or a non-AP STA. This is incorrect: the peer AP's capabilities must be parsed using Figure 9-1074at even when it operates on 20 MHz only. Parsing it as Figure 9-1074as causes rx_tx_mcs13_max_nss to be interpreted as zero, which is then passed to firmware, leading firmware to assume the peer does not support MCS 13 and to limit TX rates at MCS 11. Fix this by parsing the Figure 9-1074as format only when the peer is a 20 MHz-Only non-AP STA, i.e. when the local interface operates as AP or mesh point. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00302-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.115823.3 Fixes: 6c95151e2e77 ("wifi: ath12k: Add EHT MCS/NSS rates to Peer Assoc") Signed-off-by: Baochen Qiang Reviewed-by: Rameshkumar Sundaram Link: https://patch.msgid.link/20260514-ath12k-fix-20mhz-only-mcs-map-v1-1-a38d4a9b21a2@oss.qualcomm.com Signed-off-by: Jeff Johnson --- drivers/net/wireless/ath/ath12k/mac.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c index df2334f3bad6..2cff9485c95a 100644 --- a/drivers/net/wireless/ath/ath12k/mac.c +++ b/drivers/net/wireless/ath/ath12k/mac.c @@ -3446,7 +3446,9 @@ static void ath12k_peer_assoc_h_eht(struct ath12k *ar, arg->peer_eht_mcs_count++; fallthrough; default: - if (!(link_sta->he_cap.he_cap_elem.phy_cap_info[0] & + if ((vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_MESH_POINT) && + !(link_sta->he_cap.he_cap_elem.phy_cap_info[0] & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL)) { bw_20 = &eht_cap->eht_mcs_nss_supp.only_20mhz; @@ -3475,7 +3477,9 @@ static void ath12k_peer_assoc_h_eht(struct ath12k *ar, arg->punct_bitmap = ~arvif->punct_bitmap; arg->eht_disable_mcs15 = link_conf->eht_disable_mcs15; - if (!(link_sta->he_cap.he_cap_elem.phy_cap_info[0] & + if ((vif->type == NL80211_IFTYPE_AP || + vif->type == NL80211_IFTYPE_MESH_POINT) && + !(link_sta->he_cap.he_cap_elem.phy_cap_info[0] & IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL)) { if (bw_20->rx_tx_mcs13_max_nss) max_nss = max(max_nss, u8_get_bits(bw_20->rx_tx_mcs13_max_nss, -- cgit v1.2.3 From e9f5e8da29762df1111a58ae0b4a83091595d834 Mon Sep 17 00:00:00 2001 From: Louis-Alexis Eyraud Date: Wed, 29 Apr 2026 11:58:59 +0200 Subject: drm/mediatek: mtk_hdmi_ddc_v2: Fix non-static global variable The struct 'mtk_hdmi_ddc_v2_driver' is not used outside of the mtk_hdmi_ddc_v2.c file, so make it static to silence sparse warning: ``` drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c:392:24: sparse: warning: symbol 'mtk_hdmi_ddc_v2_driver' was not declared. Should it be static? ``` Fixes: 8d0f79886273 ("drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202604132044.fcYjEcU8-lkp@intel.com/ Signed-off-by: Louis-Alexis Eyraud Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/dri-devel/patch/20260429-mediatek-drm-fix-sparse-warnings-v1-1-d95c4d118b83@collabora.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c b/drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c index d937219fdb7e..31e81a6de6d8 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_ddc_v2.c @@ -389,7 +389,7 @@ static const struct of_device_id mtk_hdmi_ddc_v2_match[] = { }; MODULE_DEVICE_TABLE(of, mtk_hdmi_ddc_v2_match); -struct platform_driver mtk_hdmi_ddc_v2_driver = { +static struct platform_driver mtk_hdmi_ddc_v2_driver = { .probe = mtk_hdmi_ddc_v2_probe, .driver = { .name = "mediatek-hdmi-ddc-v2", -- cgit v1.2.3 From dc245d9a7f1b06f86271d4e524d6e5634c5ce312 Mon Sep 17 00:00:00 2001 From: Louis-Alexis Eyraud Date: Wed, 29 Apr 2026 11:59:00 +0200 Subject: drm/mediatek: mtk_hdmi_v2: Fix non-static global variable The struct 'mtk_hdmi_v2_clk_names' is not used outside of the mtk_hdmi_v2.c file, so make it static to silence sparse warning: ``` drivers/gpu/drm/mediatek/mtk_hdmi_v2.c:53:12: sparse: warning: symbol 'mtk_hdmi_v2_clk_names' was not declared. Should it be static? ``` Fixes: 8d0f79886273 ("drm/mediatek: Introduce HDMI/DDC v2 for MT8195/MT8188") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202604132044.fcYjEcU8-lkp@intel.com/ Signed-off-by: Louis-Alexis Eyraud Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/dri-devel/patch/20260429-mediatek-drm-fix-sparse-warnings-v1-2-d95c4d118b83@collabora.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_hdmi_v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c b/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c index b5c738380dc2..a8eb6fd0908b 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_v2.c @@ -50,7 +50,7 @@ enum mtk_hdmi_v2_clk_id { MTK_HDMI_V2_CLK_COUNT, }; -const char *const mtk_hdmi_v2_clk_names[MTK_HDMI_V2_CLK_COUNT] = { +static const char *const mtk_hdmi_v2_clk_names[MTK_HDMI_V2_CLK_COUNT] = { [MTK_HDMI_V2_CLK_HDMI_APB_SEL] = "bus", [MTK_HDMI_V2_CLK_HDCP_SEL] = "hdcp", [MTK_HDMI_V2_CLK_HDCP_24M_SEL] = "hdcp24m", -- cgit v1.2.3 From 571f00a5fb725984049bd532ee8193cc34ff2994 Mon Sep 17 00:00:00 2001 From: Louis-Alexis Eyraud Date: Wed, 29 Apr 2026 11:59:01 +0200 Subject: drm/mediatek: mtk_cec: Fix non-static global variable The struct 'mtk_cec_driver' is not used outside of the mtk_cec.c file, so make it static to silence sparse warning: ``` drivers/gpu/drm/mediatek/mtk_cec.c:243:24: sparse: warning: symbol 'mtk_cec_driver' was not declared. Should it be static? ``` Fixes: 1e914a89ab7e ("drm/mediatek: mtk_cec: Switch to register as module_platform_driver") Signed-off-by: Louis-Alexis Eyraud Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/dri-devel/patch/20260429-mediatek-drm-fix-sparse-warnings-v1-3-d95c4d118b83@collabora.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_cec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_cec.c b/drivers/gpu/drm/mediatek/mtk_cec.c index c7be530ca041..b8ccd6e55bed 100644 --- a/drivers/gpu/drm/mediatek/mtk_cec.c +++ b/drivers/gpu/drm/mediatek/mtk_cec.c @@ -240,7 +240,7 @@ static const struct of_device_id mtk_cec_of_ids[] = { }; MODULE_DEVICE_TABLE(of, mtk_cec_of_ids); -struct platform_driver mtk_cec_driver = { +static struct platform_driver mtk_cec_driver = { .probe = mtk_cec_probe, .remove = mtk_cec_remove, .driver = { -- cgit v1.2.3 From 87ed4e845d5a90bba1a56c0a5c580a13982e8648 Mon Sep 17 00:00:00 2001 From: Louis-Alexis Eyraud Date: Wed, 29 Apr 2026 11:59:02 +0200 Subject: drm/mediatek: mtk_hdmi_ddc: Fix non-static global variable The struct 'mtk_hdmi_ddc_driver' is not used outside of the mtk_hdmi_ddc.c file, so make it static to silence sparse warning: ``` drivers/gpu/drm/mediatek/mtk_hdmi_ddc.c:331:24: sparse: warning: symbol 'mtk_hdmi_ddc_driver' was not declared. Should it be static? ``` Fixes: c241118b6216 ("drm/mediatek: mtk_hdmi_ddc: Switch to register as module_platform_driver") Signed-off-by: Louis-Alexis Eyraud Reviewed-by: CK Hu Link: https://patchwork.kernel.org/project/dri-devel/patch/20260429-mediatek-drm-fix-sparse-warnings-v1-4-d95c4d118b83@collabora.com/ Signed-off-by: Chun-Kuang Hu --- drivers/gpu/drm/mediatek/mtk_hdmi_ddc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_ddc.c b/drivers/gpu/drm/mediatek/mtk_hdmi_ddc.c index 6358e1af69b4..2acbdb025d89 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi_ddc.c +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_ddc.c @@ -328,7 +328,7 @@ static const struct of_device_id mtk_hdmi_ddc_match[] = { }; MODULE_DEVICE_TABLE(of, mtk_hdmi_ddc_match); -struct platform_driver mtk_hdmi_ddc_driver = { +static struct platform_driver mtk_hdmi_ddc_driver = { .probe = mtk_hdmi_ddc_probe, .remove = mtk_hdmi_ddc_remove, .driver = { -- cgit v1.2.3 From cf18e36455603d65d4745de83e2d1743c54ada47 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Sun, 17 May 2026 17:30:10 -0400 Subject: io_uring: propagate array_index_nospec opcode into req->opcode Commit 1e988c3fe126 ("io_uring: prevent opcode speculation") added array_index_nospec() to io_init_req(), but applied it only to a local opcode variable. req->opcode is initialized from sqe->opcode before the bounds check and remains the raw value. Keep req->opcode as the canonical opcode in io_init_req(): reject out-of-range values architecturally, then write the array_index_nospec() result back to req->opcode before any table lookup. This keeps downstream users of req->opcode from observing the raw user byte on a mispredicted path. No functional change: array_index_nospec() is a no-op for opcodes in [0, IORING_OP_LAST), and out-of-range opcodes are still rejected at the bounds check above the assignment. Fixes: 1e988c3fe126 ("io_uring: prevent opcode speculation") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260517213010.696135-1-michael.bommarito@gmail.com Signed-off-by: Jens Axboe --- io_uring/io_uring.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index 036145ee466c..103b6c88f252 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -1738,10 +1738,9 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req, const struct io_issue_def *def; unsigned int sqe_flags; int personality; - u8 opcode; req->ctx = ctx; - req->opcode = opcode = READ_ONCE(sqe->opcode); + req->opcode = READ_ONCE(sqe->opcode); /* same numerical values with corresponding REQ_F_*, safe to copy */ sqe_flags = READ_ONCE(sqe->flags); req->flags = (__force io_req_flags_t) sqe_flags; @@ -1751,13 +1750,13 @@ static int io_init_req(struct io_ring_ctx *ctx, struct io_kiocb *req, req->cancel_seq_set = false; req->async_data = NULL; - if (unlikely(opcode >= IORING_OP_LAST)) { + if (unlikely(req->opcode >= IORING_OP_LAST)) { req->opcode = 0; return io_init_fail_req(req, -EINVAL); } - opcode = array_index_nospec(opcode, IORING_OP_LAST); + req->opcode = array_index_nospec(req->opcode, IORING_OP_LAST); - def = &io_issue_defs[opcode]; + def = &io_issue_defs[req->opcode]; if (def->is_128 && !(ctx->flags & IORING_SETUP_SQE128)) { /* * A 128b op on a non-128b SQ requires mixed SQE support as -- cgit v1.2.3 From a7e8f3efd50a165ba0189f6dc57f7e51a7d149db Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 12 May 2026 09:43:34 +0200 Subject: spi: qup: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer (or attempting to release a channel a second time) on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: 612762e82ae6 ("spi: qup: Add DMA capabilities") Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=4 Cc: stable@vger.kernel.org # 4.1 Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260512074334.914735-1-johan@kernel.org Signed-off-by: Mark Brown --- drivers/spi/spi-qup.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index 45d9b4cb75e4..50bb7701b9d5 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -996,8 +996,11 @@ static int spi_qup_init_dma(struct spi_controller *host, resource_size_t base) err: dma_release_channel(host->dma_tx); + host->dma_tx = NULL; err_tx: dma_release_channel(host->dma_rx); + host->dma_rx = NULL; + return ret; } -- cgit v1.2.3 From 3d67fffb74267772d461c02c67f1eff893ad547d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 12 May 2026 09:47:33 +0200 Subject: spi: sprd: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to check the dma.enabled flag before trying to release the DMA channels also on late probe errors to avoid dereferencing an error pointer (or attempting to release a channel a second time). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: 386119bc7be9 ("spi: sprd: spi: sprd: Add DMA mode support") Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=10 Cc: stable@vger.kernel.org # 5.1 Cc: Lanqing Liu Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260512074733.915029-1-johan@kernel.org Signed-off-by: Mark Brown --- drivers/spi/spi-sprd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-sprd.c b/drivers/spi/spi-sprd.c index fd3fd0ce122c..acebf9c2e795 100644 --- a/drivers/spi/spi-sprd.c +++ b/drivers/spi/spi-sprd.c @@ -991,7 +991,8 @@ err_rpm_put: disable_clk: clk_disable_unprepare(ss->clk); release_dma: - sprd_spi_dma_release(ss); + if (ss->dma.enable) + sprd_spi_dma_release(ss); free_controller: spi_controller_put(sctlr); -- cgit v1.2.3 From ea6ec3343e05f7937a53eb6d7617b3abdb4abc19 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 12 May 2026 09:48:09 +0200 Subject: spi: ti-qspi: fix use-after-free after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to clear the DMA channel pointer also if buffer allocation fails to avoid passing a pointer to the released channel to the DMA engine (or trying to free the channel a second time on late probe errors or driver unbind). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch. Fixes: c687c46e9e45 ("spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble") Link: https://sashiko.dev/#/patchset/20260505072909.618363-1-johan%40kernel.org?part=17 Cc: stable@vger.kernel.org # 4.12 Cc: Vignesh R Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260512074809.915084-1-johan@kernel.org Signed-off-by: Mark Brown --- drivers/spi/spi-ti-qspi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 1fbd710d616f..e3b413b9828c 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -867,6 +867,7 @@ static int ti_qspi_probe(struct platform_device *pdev) dev_err(qspi->dev, "dma_alloc_coherent failed, using PIO mode\n"); dma_release_channel(qspi->rx_chan); + qspi->rx_chan = NULL; goto no_dma; } host->dma_rx = qspi->rx_chan; -- cgit v1.2.3 From 593889c401426004bd0ea0f6d4fcece728b03420 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 11 May 2026 19:54:41 +0200 Subject: srcu: Don't queue workqueue handlers to never-online CPUs While an srcu_struct structure is in the midst of switching from CPU-0 to all-CPUs state, it can attempt to invoke callbacks for CPUs that have never been online. Worse yet, it can attempt in invoke callbacks for CPUs that never will be online, even including imaginary CPUs not in cpu_possible_mask. This can cause hangs on s390, which is not set up to deal with workqueue handlers being scheduled on such CPUs. This commit therefore causes Tree SRCU to refrain from queueing workqueue handlers on CPUs that have not yet (and might never) come online. Because callbacks are not invoked on CPUs that have not been online, it is an error to invoke call_srcu(), synchronize_srcu(), or synchronize_srcu_expedited() on a CPU that is not yet fully online. However, it turns out to be less code to redirect the callbacks from too-early invocations of call_srcu() than to warn about such invocations. This commit therefore also redirects callbacks queued on not-yet-fully-online CPUs to the boot CPU. Reported-by: Vasily Gorbik Fixes: 61bbcfb50514 ("srcu: Push srcu_node allocation to GP when non-preemptible") Signed-off-by: Paul E. McKenney Tested-by: Vasily Gorbik Tested-by: Samir Reviewed-by: Shrikanth Hegde Cc: Tejun Heo Signed-off-by: Uladzislau Rezki (Sony) Signed-off-by: Boqun Feng --- kernel/rcu/srcutree.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c index 0d01cd8c4b4a..7c2f7cc131f7 100644 --- a/kernel/rcu/srcutree.c +++ b/kernel/rcu/srcutree.c @@ -897,11 +897,9 @@ static void srcu_schedule_cbs_snp(struct srcu_struct *ssp, struct srcu_node *snp { int cpu; - for (cpu = snp->grplo; cpu <= snp->grphi; cpu++) { - if (!(mask & (1UL << (cpu - snp->grplo)))) - continue; - srcu_schedule_cbs_sdp(per_cpu_ptr(ssp->sda, cpu), delay); - } + for (cpu = snp->grplo; cpu <= snp->grphi; cpu++) + if ((mask & (1UL << (cpu - snp->grplo))) && rcu_cpu_beenfullyonline(cpu)) + srcu_schedule_cbs_sdp(per_cpu_ptr(ssp->sda, cpu), delay); } /* @@ -1322,7 +1320,9 @@ static unsigned long srcu_gp_start_if_needed(struct srcu_struct *ssp, */ idx = __srcu_read_lock_nmisafe(ssp); ss_state = smp_load_acquire(&ssp->srcu_sup->srcu_size_state); - if (ss_state < SRCU_SIZE_WAIT_CALL) + // If !rcu_cpu_beenfullyonline(), interrupts are still disabled, + // so no migration is possible in either direction from this CPU. + if (ss_state < SRCU_SIZE_WAIT_CALL || !rcu_cpu_beenfullyonline(raw_smp_processor_id())) sdp = per_cpu_ptr(ssp->sda, get_boot_cpu_id()); else sdp = raw_cpu_ptr(ssp->sda); -- cgit v1.2.3 From 8817005efbdfdf5d4e4814cb5dc52b53d12917d7 Mon Sep 17 00:00:00 2001 From: Qing Ming Date: Sat, 16 May 2026 15:08:49 +0800 Subject: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. Fixes: a319185be9f5 ("cgroup: bpf: enable bpf programs to integrate with rstat") Signed-off-by: Qing Ming Signed-off-by: Tejun Heo --- block/blk-cgroup.c | 2 +- include/linux/cgroup.h | 1 + kernel/cgroup/rstat.c | 30 ++++++++++++++++++++---------- mm/memcontrol.c | 6 +++--- 4 files changed, 25 insertions(+), 14 deletions(-) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 554c87bb4a86..bc63bd220865 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -2241,7 +2241,7 @@ void blk_cgroup_bio_start(struct bio *bio) } u64_stats_update_end_irqrestore(&bis->sync, flags); - css_rstat_updated(&blkcg->css, cpu); + __css_rstat_updated(&blkcg->css, cpu); put_cpu(); } diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index e52160e85af4..e011dc43fcf1 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -776,6 +776,7 @@ static inline void cgroup_path_from_kernfs_id(u64 id, char *buf, size_t buflen) /* * cgroup scalable recursive statistics. */ +void __css_rstat_updated(struct cgroup_subsys_state *css, int cpu); void css_rstat_updated(struct cgroup_subsys_state *css, int cpu); void css_rstat_flush(struct cgroup_subsys_state *css); diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c index 150e5871e66f..ed60ba119c68 100644 --- a/kernel/cgroup/rstat.c +++ b/kernel/cgroup/rstat.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only #include "cgroup-internal.h" +#include #include #include @@ -53,7 +54,7 @@ static inline struct llist_head *ss_lhead_cpu(struct cgroup_subsys *ss, int cpu) } /** - * css_rstat_updated - keep track of updated rstat_cpu + * __css_rstat_updated - keep track of updated rstat_cpu * @css: target cgroup subsystem state * @cpu: cpu on which rstat_cpu was updated * @@ -63,20 +64,17 @@ static inline struct llist_head *ss_lhead_cpu(struct cgroup_subsys *ss, int cpu) * * NOTE: if the user needs the guarantee that the updater either add itself in * the lockless list or the concurrent flusher flushes its updated stats, a - * memory barrier is needed before the call to css_rstat_updated() i.e. a + * memory barrier is needed before the call to __css_rstat_updated() i.e. a * barrier after updating the per-cpu stats and before calling - * css_rstat_updated(). + * __css_rstat_updated(). */ -__bpf_kfunc void css_rstat_updated(struct cgroup_subsys_state *css, int cpu) +void __css_rstat_updated(struct cgroup_subsys_state *css, int cpu) { struct llist_head *lhead; struct css_rstat_cpu *rstatc; struct llist_node *self; - /* - * Since bpf programs can call this function, prevent access to - * uninitialized rstat pointers. - */ + /* Prevent access to uninitialized rstat pointers. */ if (!css_uses_rstat(css)) return; @@ -125,6 +123,18 @@ __bpf_kfunc void css_rstat_updated(struct cgroup_subsys_state *css, int cpu) llist_add(&rstatc->lnode, lhead); } +/* + * BPF-facing wrapper for __css_rstat_updated(). Validate the caller-provided + * CPU before passing it to the internal rstat updater. + */ +__bpf_kfunc void css_rstat_updated(struct cgroup_subsys_state *css, int cpu) +{ + if (unlikely(cpu < 0 || cpu >= nr_cpu_ids || !cpu_possible(cpu))) + return; + + __css_rstat_updated(css, cpu); +} + static void __css_process_update_tree(struct cgroup_subsys_state *css, int cpu) { /* put @css and all ancestors on the corresponding updated lists */ @@ -170,7 +180,7 @@ static void css_process_update_tree(struct cgroup_subsys *ss, int cpu) * flusher flush the stats updated by the updater who have * observed that they are already on the list. The * corresponding barrier pair for this one should be before - * css_rstat_updated() by the user. + * __css_rstat_updated() by the user. * * For now, there aren't any such user, so not adding the * barrier here but if such a use-case arise, please add @@ -614,7 +624,7 @@ static void cgroup_base_stat_cputime_account_end(struct cgroup *cgrp, unsigned long flags) { u64_stats_update_end_irqrestore(&rstatbc->bsync, flags); - css_rstat_updated(&cgrp->self, smp_processor_id()); + __css_rstat_updated(&cgrp->self, smp_processor_id()); put_cpu_ptr(rstatbc); } diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 051b82ebf371..c7e60f26013c 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -579,7 +579,7 @@ static inline void memcg_rstat_updated(struct mem_cgroup *memcg, int val, if (!val) return; - css_rstat_updated(&memcg->css, cpu); + __css_rstat_updated(&memcg->css, cpu); statc_pcpu = memcg->vmstats_percpu; for (; statc_pcpu; statc_pcpu = statc->parent_pcpu) { statc = this_cpu_ptr(statc_pcpu); @@ -2608,7 +2608,7 @@ static inline void account_slab_nmi_safe(struct mem_cgroup *memcg, struct mem_cgroup_per_node *pn = memcg->nodeinfo[pgdat->node_id]; /* preemption is disabled in_nmi(). */ - css_rstat_updated(&memcg->css, smp_processor_id()); + __css_rstat_updated(&memcg->css, smp_processor_id()); if (idx == NR_SLAB_RECLAIMABLE_B) atomic_add(nr, &pn->slab_reclaimable); else @@ -2832,7 +2832,7 @@ static inline void account_kmem_nmi_safe(struct mem_cgroup *memcg, int val) mod_memcg_state(memcg, MEMCG_KMEM, val); } else { /* preemption is disabled in_nmi(). */ - css_rstat_updated(&memcg->css, smp_processor_id()); + __css_rstat_updated(&memcg->css, smp_processor_id()); atomic_add(val, &memcg->kmem_stat); } } -- cgit v1.2.3 From 4d3a2a466b8d68d852a1f3bbf11204b718428dc4 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Sun, 17 May 2026 13:51:01 +0900 Subject: HID: core: Fix size_t specifier in hid_report_raw_event() When building for 32-bit platforms, for which 'size_t' is 'unsigned int', there are warnings around using the incorrect format specifier to print bsize in hid_report_raw_event(): drivers/hid/hid-core.c:2054:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] 2053 | hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n", | ~~~ | %zu 2054 | report->id, csize, bsize); | ^~~~~ drivers/hid/hid-core.c:2076:29: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] 2075 | hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n", | ~~~ | %zu 2076 | report->id, rsize, bsize); | ^~~~~ Use the proper 'size_t' format specifier, '%zu', to clear up the warnings. Cc: stable@vger.kernel.org Fixes: 2c85c61d1332 ("HID: pass the buffer size to hid_report_raw_event") Reported-by: Miguel Ojeda Closes: https://lore.kernel.org/20260516020430.110135-1-ojeda@kernel.org/ Signed-off-by: Nathan Chancellor Signed-off-by: Linus Torvalds --- drivers/hid/hid-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index b3596851c719..41a79e43c82b 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2050,7 +2050,7 @@ int hid_report_raw_event(struct hid_device *hid, enum hid_report_type type, u8 * return 0; if (unlikely(bsize < csize)) { - hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %ld)\n", + hid_warn_ratelimited(hid, "Event data for report %d is incorrect (%d vs %zu)\n", report->id, csize, bsize); return -EINVAL; } @@ -2072,7 +2072,7 @@ int hid_report_raw_event(struct hid_device *hid, enum hid_report_type type, u8 * rsize = max_buffer_size; if (bsize < rsize) { - hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %ld)\n", + hid_warn_ratelimited(hid, "Event data for report %d was too short (%d vs %zu)\n", report->id, rsize, bsize); return -EINVAL; } -- cgit v1.2.3 From b0fe80c0b9250b35e2211bf3117e7aca814a21b0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ma=C3=ADra=20Canal?= Date: Fri, 15 May 2026 12:07:14 -0300 Subject: drm/v3d: Fix use-after-free of CPU job query arrays on error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The CPU job ioctl's fail label calls kvfree() on cpu_job's timestamp and performance query arrays after v3d_job_cleanup(), which drops the job's last reference and frees cpu_job. Reading cpu_job at that point is a use-after-free. Also, on the early v3d_job_init() failure path, it is a NULL dereference, since v3d_job_deallocate() zeroes the local pointer. In the success path, the arrays are released from the scheduler's .free_job callback, but on the error path, they are freed manually, as the job was never pushed to the scheduler. While the success path deals with this correctly, the fail path doesn't. On top of that, the manual kvfree() calls only free the array storage; they don't drm_syncobj_put() the per-query syncobjs that v3d_timestamp_query_info_free() and v3d_performance_query_info_free() release on the success path. So the same fail path that triggers the use-after-free also leaks one syncobj reference per query. Unify the CPU job teardown into the CPU job's kref destructor, mirroring v3d_render_job_free(). The scheduler's .free_job slot reverts to the generic v3d_sched_job_free() and the fail label drops the manual kvfree() calls, leaving a single teardown path that is reached from both the scheduler and the ioctl error path. That removes the use-after-free, the NULL dereference, and the syncobj leak by construction. Cc: stable@vger.kernel.org Fixes: 9ba0ff3e083f ("drm/v3d: Create a CPU job extension for the timestamp query job") Assisted-by: Claude:claude-opus-4.7 Reviewed-by: Iago Toral Quiroga Link: https://patch.msgid.link/20260515-v3d-cpu-job-leaks-v1-1-7f147cbbf935@igalia.com Signed-off-by: Maíra Canal --- drivers/gpu/drm/v3d/v3d_sched.c | 16 +--------------- drivers/gpu/drm/v3d/v3d_submit.c | 19 ++++++++++++++++--- 2 files changed, 17 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/v3d/v3d_sched.c b/drivers/gpu/drm/v3d/v3d_sched.c index 1855ef5b3b5f..94bf628dc91c 100644 --- a/drivers/gpu/drm/v3d/v3d_sched.c +++ b/drivers/gpu/drm/v3d/v3d_sched.c @@ -125,20 +125,6 @@ v3d_performance_query_info_free(struct v3d_performance_query_info *query_info, } } -static void -v3d_cpu_job_free(struct drm_sched_job *sched_job) -{ - struct v3d_cpu_job *job = to_cpu_job(sched_job); - - v3d_timestamp_query_info_free(&job->timestamp_query, - job->timestamp_query.count); - - v3d_performance_query_info_free(&job->performance_query, - job->performance_query.count); - - v3d_job_cleanup(&job->base); -} - static void v3d_switch_perfmon(struct v3d_dev *v3d, struct v3d_job *job) { @@ -830,7 +816,7 @@ static const struct drm_sched_backend_ops v3d_cache_clean_sched_ops = { static const struct drm_sched_backend_ops v3d_cpu_sched_ops = { .run_job = v3d_cpu_job_run, - .free_job = v3d_cpu_job_free + .free_job = v3d_sched_job_free }; static int diff --git a/drivers/gpu/drm/v3d/v3d_submit.c b/drivers/gpu/drm/v3d/v3d_submit.c index ee4512db294b..e3a6e7cc7bd5 100644 --- a/drivers/gpu/drm/v3d/v3d_submit.c +++ b/drivers/gpu/drm/v3d/v3d_submit.c @@ -123,6 +123,21 @@ v3d_render_job_free(struct kref *ref) v3d_job_free(ref); } +static void +v3d_cpu_job_free(struct kref *ref) +{ + struct v3d_cpu_job *job = container_of(ref, struct v3d_cpu_job, + base.refcount); + + v3d_timestamp_query_info_free(&job->timestamp_query, + job->timestamp_query.count); + + v3d_performance_query_info_free(&job->performance_query, + job->performance_query.count); + + v3d_job_free(ref); +} + void v3d_job_cleanup(struct v3d_job *job) { if (!job) @@ -1302,7 +1317,7 @@ v3d_submit_cpu_ioctl(struct drm_device *dev, void *data, trace_v3d_submit_cpu_ioctl(&v3d->drm, cpu_job->job_type); ret = v3d_job_init(v3d, file_priv, &cpu_job->base, - v3d_job_free, 0, &se, V3D_CPU); + v3d_cpu_job_free, 0, &se, V3D_CPU); if (ret) { v3d_job_deallocate((void *)&cpu_job); goto fail; @@ -1385,8 +1400,6 @@ fail: v3d_job_cleanup((void *)csd_job); v3d_job_cleanup(clean_job); v3d_put_multisync_post_deps(&se); - kvfree(cpu_job->timestamp_query.queries); - kvfree(cpu_job->performance_query.queries); return ret; } -- cgit v1.2.3 From 6eb6e5acafa46854d4363e6c34981289995f3ace Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ma=C3=ADra=20Canal?= Date: Fri, 15 May 2026 12:07:15 -0300 Subject: drm/v3d: Release indirect CSD GEM reference on CPU job free MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit v3d_get_cpu_indirect_csd_params() takes a reference to the indirect BO via drm_gem_object_lookup() and stashes it in cpu_job->indirect_csd.indirect, but nothing on the CPU job teardown path ever drops that reference. Drop the extra reference in v3d_cpu_job_free(). The NULL check covers ioctl errors before the lookup ran and CPU job types other than V3D_CPU_JOB_TYPE_INDIRECT_CSD, which leave the field zero-initialised. Cc: stable@vger.kernel.org Fixes: 18b8413b25b7 ("drm/v3d: Create a CPU job extension for a indirect CSD job") Assisted-by: Claude:claude-opus-4.7 Reviewed-by: Iago Toral Quiroga Link: https://patch.msgid.link/20260515-v3d-cpu-job-leaks-v1-2-7f147cbbf935@igalia.com Signed-off-by: Maíra Canal --- drivers/gpu/drm/v3d/v3d_submit.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/v3d/v3d_submit.c b/drivers/gpu/drm/v3d/v3d_submit.c index e3a6e7cc7bd5..3ddd53b6f437 100644 --- a/drivers/gpu/drm/v3d/v3d_submit.c +++ b/drivers/gpu/drm/v3d/v3d_submit.c @@ -135,6 +135,9 @@ v3d_cpu_job_free(struct kref *ref) v3d_performance_query_info_free(&job->performance_query, job->performance_query.count); + if (job->indirect_csd.indirect) + drm_gem_object_put(job->indirect_csd.indirect); + v3d_job_free(ref); } -- cgit v1.2.3 From c326f9c68921e2f14dfcecb2f6b4216313d50248 Mon Sep 17 00:00:00 2001 From: Dragos Tatulea Date: Wed, 13 May 2026 09:46:13 +0300 Subject: net/mlx5e: xsk: Fix unlocked writing to ICOSQ During napi poll, when the affinity changes and there's still XSK work to be done, we trigger an ICOSQ interrupt on the new CPU. However, this triggering on the ICOSQ is done unprotected. There are 2 such races: A) mlx5e_trigger_irq() is called while mlx5e_xsk_alloc_rx_mpwqe() is running from a different CPU due to affinity change. This can happen because IRQ triggering is done after napi_complete_done(). At this point the NAPI can be scheduled on a different CPU. Like this: CPU A (old affinity, NAPI tail) CPU B (new affinity, fresh NAPI) ------------------------------- -------------------------------- napi_complete_done() clears SCHED mlx5e_cq_arm(...) napi_schedule_prep() sets SCHED mlx5e_napi_poll() mlx5e_xsk_alloc_rx_mpwqe() mlx5e_icosq_sync_lock() // noop memcpy 640 B UMR body advance sq->pc by 10 mlx5e_trigger_irq(&c->icosq) wqe_info[pi] = {NOP, 1} mlx5e_post_nop() advances sq->pc B) mlx5e_trigger_irq() is called on the ICOSQ when mlx5e_trigger_napi_icosq() is running. The obvious fix would be to lock the ICOSQ. But ICOSQ has an optimized locking scheme that doesn't work for this scenario. Kick the async ICOSQ instead which is always locked. This issue was noticed in the wild with the following splat: netdevice: ge-0-0-1: Bad OP in ICOSQ CQE: 0xd WARNING: drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:826 [...] [...] Call Trace: mlx5e_napi_poll+0x11d/0x7f0 [mlx5_core] __napi_poll+0x30/0x200 ? skb_defer_free_flush+0x9c/0xc0 net_rx_action+0x2fe/0x3f0 handle_softirqs+0xd8/0x340 __irq_exit_rcu+0xbc/0xe0 common_interrupt+0x85/0xa0 asm_common_interrupt+0x26/0x40 [...] ---[ end trace 0000000000000000 ]--- mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2022, qn 0x8f4, opcode 0xd, syndrome 0x2, vendor syndrome 0x68 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 68 02 01 00 08 f4 de 14 59 d2 WQE DUMP: WQ size 16384 WQ cur size 0, WQE index 0x1e14, len: 64 00000000: 00 00 00 01 d9 ed 80 02 00 00 00 01 d9 ed 90 02 00000010: 00 00 00 01 d9 ed a0 02 00 00 00 01 d9 ed b0 02 00000020: 00 00 00 01 d9 ed c0 02 00 00 00 01 d9 ed d0 02 00000030: 00 00 00 01 d9 ed e0 02 00 00 00 01 d9 ed f0 02 mlx5_core 0000:08:00.0 ge-0-0-1: Error cqe on cqn 0x548, ci 0x2023, qn 0x8f4, opcode 0xd, syndrome 0x5, vendor syndrome 0xf9 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00000030: 00 00 00 00 01 00 f9 05 01 00 08 f4 de 15 cf d2 Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Reported-by: Paul Saab Signed-off-by: Dragos Tatulea Signed-off-by: Tariq Toukan Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260513064613.334602-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c index b31f689fe271..e90c6c6df835 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c @@ -252,7 +252,7 @@ int mlx5e_napi_poll(struct napi_struct *napi, int budget) mlx5e_cq_arm(&c->xdpsq->cq); if (unlikely(aff_change && busy_xsk)) { - mlx5e_trigger_irq(&c->icosq); + mlx5e_trigger_napi_async_icosq(c); ch_stats->force_irq++; } -- cgit v1.2.3 From 9e7f36ab5b7bf68463faa5f7b926fea8f35597bb Mon Sep 17 00:00:00 2001 From: Weiming Shi Date: Thu, 14 May 2026 05:38:08 -0700 Subject: net: appletalk: fix NULL pointer dereference in aarp_send_ddp() aarp_send_ddp() calls atalk_find_dev_addr(dev) in the LocalTalk fast path without checking for NULL. When the device has no AppleTalk interface configured (dev->atalk_ptr == NULL), this leads to a NULL pointer dereference at the at->s_net access. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:aarp_send_ddp (net/appletalk/aarp.c:552 (discriminator 2)) Call Trace: atalk_sendmsg (net/appletalk/ddp.c:1715) __sys_sendto (net/socket.c:2265 (discriminator 1)) __x64_sys_sendto (net/socket.c:2272) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Add a NULL check consistent with the other callers of atalk_find_dev_addr(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Link: https://patch.msgid.link/20260514123806.3085961-3-bestswngs@gmail.com Signed-off-by: Jakub Kicinski --- net/appletalk/aarp.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/appletalk/aarp.c b/net/appletalk/aarp.c index e7315c01a299..30493ea3c010 100644 --- a/net/appletalk/aarp.c +++ b/net/appletalk/aarp.c @@ -542,6 +542,11 @@ int aarp_send_ddp(struct net_device *dev, struct sk_buff *skb, struct ddpehdr *ddp = (struct ddpehdr *)skb->data; int ft = 2; + if (!at) { + kfree_skb(skb); + return NET_XMIT_DROP; + } + /* * Compressible ? * -- cgit v1.2.3 From d00c953a8f69921f484b629801766da68f27f658 Mon Sep 17 00:00:00 2001 From: Weiming Shi Date: Thu, 14 May 2026 05:25:12 -0700 Subject: net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink() rmnet_dellink() removes the endpoint from the hash table with hlist_del_init_rcu() and then immediately frees it with kfree(). However, RCU readers on the receive path (rmnet_rx_handler -> __rmnet_map_ingress_handler) may still hold a reference to the endpoint and dereference ep->egress_dev after the memory has been freed. The endpoint is a kmalloc-32 object, and the stale read at offset 8 corresponds to the egress_dev pointer. BUG: unable to handle page fault for address: ffffffffde942eef Oops: 0002 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27) Call Trace: __rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101) rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6096) __netif_receive_skb_one_core (net/core/dev.c:6208) netif_receive_skb (net/core/dev.c:6467) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2003) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) Add an rcu_head field to struct rmnet_endpoint and replace kfree() with kfree_rcu() so the endpoint memory remains valid through the RCU grace period. Also remove the rmnet_vnd_dellink() call and inline only the nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set ep->egress_dev to NULL during the grace period, creating a data race with lockless readers. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Link: https://patch.msgid.link/20260514122511.3083479-2-bestswngs@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 8 ++++---- drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h | 1 + 2 files changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c index 269c0449760c..78d4df55740a 100644 --- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c +++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c @@ -213,8 +213,8 @@ static void rmnet_dellink(struct net_device *dev, struct list_head *head) ep = rmnet_get_endpoint(real_port, mux_id); if (ep) { hlist_del_init_rcu(&ep->hlnode); - rmnet_vnd_dellink(mux_id, real_port, ep); - kfree(ep); + real_port->nr_rmnet_devs--; + kfree_rcu(ep, rcu); } netdev_upper_dev_unlink(real_dev, dev); @@ -238,9 +238,9 @@ static void rmnet_force_unassociate_device(struct net_device *real_dev) hash_for_each_safe(port->muxed_ep, bkt_ep, tmp_ep, ep, hlnode) { unregister_netdevice_queue(ep->egress_dev, &list); netdev_upper_dev_unlink(real_dev, ep->egress_dev); - rmnet_vnd_dellink(ep->mux_id, port, ep); hlist_del_init_rcu(&ep->hlnode); - kfree(ep); + port->nr_rmnet_devs--; + kfree_rcu(ep, rcu); } rmnet_unregister_real_device(real_dev); unregister_netdevice_many(&list); diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h index ed112d51ac5a..f50fae1c6bdd 100644 --- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h +++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h @@ -18,6 +18,7 @@ struct rmnet_endpoint { u8 mux_id; struct net_device *egress_dev; struct hlist_node hlnode; + struct rcu_head rcu; }; struct rmnet_egress_agg_params { -- cgit v1.2.3 From bae3ee802c21e83ad1eb805519e6f32ea528b4d2 Mon Sep 17 00:00:00 2001 From: Ilya Maximets Date: Thu, 14 May 2026 20:46:31 +0200 Subject: openvswitch: vport: fix race between linking and the device notifier Sashiko reports that it is technically possible that we got the device reference, but by the time we're linking it to the OVS datapath, it may be already in the process of being deleted. In this case if the notifier wins the race for RTNL, it will see that the device is not yet in the OVS datapath (ovs_netdev_get_vport() will fail in the dp_device_event()) and will do nothing. Then the ovs_netdev_link() will take the RTNL and link the unregistering device to OVS datapath. Eventually, netdev_wait_allrefs_any() will re-broadcast the event and the device will be properly detached, but it will take at least a second before that happens, so it's not something we should rely on. Let's avoid linking the non-registered device in the first place. Note: As per documentation, RTNL doesn't protect the reg_state, but it actually does for all the state transitions we care about here, so it should not be necessary to use READ_ONCE or taking the instance lock. We can still do that, but we have a few more places even in this file where the reg_state is accessed without those while under RTNL, and many more places like this across the kernel code, so it might make more sense to change all of them in a more centralized fashion in the future, if necessary. Fixes: ccb1352e76cf ("net: Add Open vSwitch kernel components.") Signed-off-by: Ilya Maximets Reviewed-by: Aaron Conole Acked-by: Eelco Chaudron Link: https://patch.msgid.link/20260514184702.2461435-1-i.maximets@ovn.org Signed-off-by: Jakub Kicinski --- net/openvswitch/vport-netdev.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/net/openvswitch/vport-netdev.c b/net/openvswitch/vport-netdev.c index c42642075685..e7e8490a53d8 100644 --- a/net/openvswitch/vport-netdev.c +++ b/net/openvswitch/vport-netdev.c @@ -83,6 +83,14 @@ struct vport *ovs_netdev_link(struct vport *vport, bool tunnel) } rtnl_lock(); + /* Do not link devices that are not registered to avoid a potential + * race with the NETDEV_UNREGISTER notification in dp_device_event(). + */ + if (vport->dev->reg_state != NETREG_REGISTERED) { + err = -ENODEV; + goto error_put_unlock; + } + err = netdev_master_upper_dev_link(vport->dev, get_dpdev(vport->dp), NULL, NULL, NULL); -- cgit v1.2.3 From 8cf8b5ae8e093132b0dce0a932af10c9ef077936 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 18 May 2026 22:13:09 +0100 Subject: cifs: Fix undefined variables Fix a couple of undefined variables introduced by the patch to fix tearing on ->remote_i_size and ->zero_point. For some reason, make W=1 with gcc doesn't give undefined variable warnings (but clang does). Fixes: 2c8f4742bb76 ("netfs: Fix potential for tearing in ->remote_i_size and ->zero_point") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202605031459.eX5UbO3K-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202605021450.ca5QGqLH-lkp@intel.com/ cc: Steve French cc: Paulo Alcantara cc: Matthew Wilcox cc: Christian Brauner cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds --- fs/smb/client/cifsfs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/smb/client/cifsfs.c b/fs/smb/client/cifsfs.c index feac491c5070..f557eb7875c7 100644 --- a/fs/smb/client/cifsfs.c +++ b/fs/smb/client/cifsfs.c @@ -1304,7 +1304,7 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, struct cifsFileInfo *smb_file_src = src_file->private_data; struct cifsFileInfo *smb_file_target = dst_file->private_data; struct cifs_tcon *target_tcon, *src_tcon; - unsigned long long i_size, old_size, new_size, zero_point; + unsigned long long i_size, new_size; unsigned long long destend, fstart, fend; unsigned int xid; int rc; @@ -1372,7 +1372,7 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, goto unlock; spin_lock(&target_inode->i_lock); - if (fend > zero_point) + if (fend > target_cifsi->netfs._zero_point) netfs_write_zero_point(target_inode, fend + 1); i_size = target_inode->i_size; spin_unlock(&target_inode->i_lock); @@ -1387,7 +1387,7 @@ static loff_t cifs_remap_file_range(struct file *src_file, loff_t off, if (target_tcon->ses->server->ops->duplicate_extents) { rc = target_tcon->ses->server->ops->duplicate_extents(xid, smb_file_src, smb_file_target, off, len, destoff); - if (rc == 0 && new_size > old_size) { + if (rc == 0 && new_size > i_size) { truncate_setsize(target_inode, new_size); fscache_resize_cookie(cifs_inode_cookie(target_inode), new_size); -- cgit v1.2.3 From 89bbff099bfc94888eb942d5b981592bbbe0c856 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Fri, 15 May 2026 11:24:08 -0700 Subject: ice: fix locking around wait_event_interruptible_locked_irq Commit 50327223a8bb ("ice: add lock to protect low latency interface") introduced a wait queue used to protect the low latency timer interface. The queue is used with the wait_event_interruptible_locked_irq macro, which unlocks the wait queue lock while sleeping. The irq variant uses spin_lock_irq and spin_unlock_irq to manage this. The wait queue lock was previously locked using spin_lock_irqsave. This difference in lock variants could lead to issues, since wait_event would unlock the wait queue and restore interrupts while sleeping. The ice_read_phy_tstamp_ll_e810() function is ultimately called through ice_read_phy_tstamp, which is called from ice_ptp_process_tx_tstamp or ice_ptp_clear_unexpected_tx_ready. The former is called through the miscellaneous IRQ thread function, while the latter is called from the service task work queue thread. Neither of these functions has interrupts disabled, so use spin_lock_irq instead of spin_lock_irqsave. Fixes: 50327223a8bb ("ice: add lock to protect low latency interface") Cc: stable@vger.kernel.org Reported-by: Jakub Kicinski Closes: https://lore.kernel.org/netdev/20250109181823.77f44c69@kernel.org/ Signed-off-by: Jacob Keller Signed-off-by: Aleksandr Loktionov Reviewed-by: Simon Horman Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c index 24fb7a3e14d6..672218e5d1f9 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c @@ -4503,18 +4503,17 @@ static int ice_read_phy_tstamp_ll_e810(struct ice_hw *hw, u8 idx, u8 *hi, u32 *lo) { struct ice_e810_params *params = &hw->ptp.phy.e810; - unsigned long flags; u32 val; int err; - spin_lock_irqsave(¶ms->atqbal_wq.lock, flags); + spin_lock_irq(¶ms->atqbal_wq.lock); /* Wait for any pending in-progress low latency interrupt */ err = wait_event_interruptible_locked_irq(params->atqbal_wq, !(params->atqbal_flags & ATQBAL_FLAGS_INTR_IN_PROGRESS)); if (err) { - spin_unlock_irqrestore(¶ms->atqbal_wq.lock, flags); + spin_unlock_irq(¶ms->atqbal_wq.lock); return err; } @@ -4529,7 +4528,7 @@ ice_read_phy_tstamp_ll_e810(struct ice_hw *hw, u8 idx, u8 *hi, u32 *lo) REG_LL_PROXY_H); if (err) { ice_debug(hw, ICE_DBG_PTP, "Failed to read PTP timestamp using low latency read\n"); - spin_unlock_irqrestore(¶ms->atqbal_wq.lock, flags); + spin_unlock_irq(¶ms->atqbal_wq.lock); return err; } @@ -4539,7 +4538,7 @@ ice_read_phy_tstamp_ll_e810(struct ice_hw *hw, u8 idx, u8 *hi, u32 *lo) /* Read the low 32 bit value and set the TS valid bit */ *lo = rd32(hw, REG_LL_PROXY_L) | TS_VALID; - spin_unlock_irqrestore(¶ms->atqbal_wq.lock, flags); + spin_unlock_irq(¶ms->atqbal_wq.lock); return 0; } -- cgit v1.2.3 From 3ba4dd024d26372733d1c02e13e076c6016e3320 Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez Date: Fri, 15 May 2026 11:24:09 -0700 Subject: ice: fix VF queue configuration with low MTU values The ice driver's VF queue configuration validation rejects databuffer_size values below 1024 bytes, which prevents VFs from using MTU values below 871 bytes. The iavf driver calculates databuffer_size based on the MTU using: databuffer_size = ALIGN(MTU + LIBETH_RX_LL_LEN, 128) where LIBETH_RX_LL_LEN = 26 (ETH_HLEN + 2*VLAN_HLEN + ETH_FCS_LEN). For MTU values below 871: MTU 870: 870 + 26 = 896, aligned to 128 = 896 (< 1024, rejected) MTU 871: 871 + 26 = 897, aligned to 128 = 1024 (>= 1024, accepted) The 1024-byte minimum seems unnecessarily restrictive, because the hardware supports databuffer_size as low as 128 bytes (the alignment boundary), which should allow MTU values down to the standard minimum of 68 bytes. I haven't found the reason why the limit was configured in the commit 9c7dd7566d18 ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message"), so with no more information and since it is working, change the minimum databuffer_size validation from 1024 to 128 bytes to allow standard low MTU values while still preventing invalid configurations. Fixes: 9c7dd7566d18 ("ice: add validation in OP_CONFIG_VSI_QUEUES VF message") cc: stable@vger.kernel.org Signed-off-by: Jose Ignacio Tornos Martinez Reviewed-by: Jacob Keller Reviewed-by: Michal Swiatkowski Reviewed-by: Paul Menzel Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/virt/queues.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/virt/queues.c b/drivers/net/ethernet/intel/ice/virt/queues.c index f73d5a3e83d4..31be2f76181c 100644 --- a/drivers/net/ethernet/intel/ice/virt/queues.c +++ b/drivers/net/ethernet/intel/ice/virt/queues.c @@ -840,7 +840,7 @@ int ice_vc_cfg_qs_msg(struct ice_vf *vf, u8 *msg) if (qpi->rxq.databuffer_size != 0 && (qpi->rxq.databuffer_size > ((16 * 1024) - 128) || - qpi->rxq.databuffer_size < 1024)) + qpi->rxq.databuffer_size < 128)) goto error_param; ring->rx_buf_len = qpi->rxq.databuffer_size; -- cgit v1.2.3 From ebc8de716c9ec2be384abdc2dd866da26c6580d1 Mon Sep 17 00:00:00 2001 From: Marcin Szycik Date: Fri, 15 May 2026 11:24:10 -0700 Subject: ice: fix setting promisc mode while adding VID filter There are at least two paths through which VSI promiscuous mode can be independently configured via ice_fltr_set_vsi_promisc(): - ice_vlan_rx_add_vid() (netdev op) - ice_service_task() -> ... -> ice_set_promisc() Both paths may try to program promiscuous mode concurrently. One such scenario is: 1. Add ice netdev to bond 2. Add the bond netdev to bridge 3. ice netdev enters allmulticast mode (IFF_ALLMULTI) 4. Service task programs promisc mode filter 5. Bridge -> bond calls ice_vlan_rx_add_vid() Crucially, ice_vlan_rx_add_vid() fails if ice_fltr_set_vsi_promisc() returns any error, including -EEXIST. This causes VLAN filtering setup to fail on the bond interface. ice_set_promisc() already handles -EEXIST correctly. Fix by adding the same -EEXIST check to ice_vlan_rx_add_vid(): if the promisc filter is already programmed, continue without returning error. Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") Cc: stable@vger.kernel.org Signed-off-by: Marcin Szycik Signed-off-by: Aleksandr Loktionov Reviewed-by: Simon Horman Tested-by: Rinitha S (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index c52c465280f7..66642232b282 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -3682,7 +3682,7 @@ int ice_vlan_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid) ret = ice_fltr_set_vsi_promisc(&vsi->back->hw, vsi->idx, ICE_MCAST_VLAN_PROMISC_BITS, vid); - if (ret) + if (ret && ret != -EEXIST) goto finish; } -- cgit v1.2.3 From 781ff8f2d575a794a2a4f11605288ae06757f5eb Mon Sep 17 00:00:00 2001 From: Grzegorz Nitka Date: Fri, 15 May 2026 11:24:11 -0700 Subject: ice: ptp: serialize E825 PHY timer start with PTP lock ice_start_phy_timer_eth56g() programs TIMETUS registers and issues INIT_INCVAL without holding the global PTP semaphore. This allows concurrent PTP command paths to interleave with PHY timer start, which can make the sequence fail and leave timer initialization inconsistent. Take the PTP lock around TIMETUS registers programming and INIT_INCVAL command execution, and make sure the lock is released on all error paths. Keep the subsequent sync step outside of this critical section, since ice_sync_phy_timer_eth56g() takes the same semaphore internally. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Reviewed-by: Arkadiusz Kubalewski Signed-off-by: Grzegorz Nitka Reviewed-by: Aleksandr Loktionov Tested-by: Alexander Nowlin Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c index 672218e5d1f9..8bb94e785f2a 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c @@ -2141,16 +2141,23 @@ int ice_start_phy_timer_eth56g(struct ice_hw *hw, u8 port) } incval = (u64)hi << 32 | lo; + if (!ice_ptp_lock(hw)) { + dev_err(ice_hw_to_dev(hw), "Failed to acquire PTP semaphore\n"); + return -EBUSY; + } + err = ice_write_40b_ptp_reg_eth56g(hw, port, PHY_REG_TIMETUS_L, incval); if (err) - return err; + goto err_ptp_unlock; err = ice_ptp_one_port_cmd(hw, port, ICE_PTP_INIT_INCVAL); if (err) - return err; + goto err_ptp_unlock; ice_ptp_exec_tmr_cmd(hw); + ice_ptp_unlock(hw); + err = ice_sync_phy_timer_eth56g(hw, port); if (err) return err; @@ -2166,6 +2173,10 @@ int ice_start_phy_timer_eth56g(struct ice_hw *hw, u8 port) ice_debug(hw, ICE_DBG_PTP, "Enabled clock on PHY port %u\n", port); return 0; + +err_ptp_unlock: + ice_ptp_unlock(hw); + return err; } /** -- cgit v1.2.3 From 7b28523546c7e4adbb8436f2986efcfc8382985e Mon Sep 17 00:00:00 2001 From: Grzegorz Nitka Date: Fri, 15 May 2026 11:24:12 -0700 Subject: ice: ptp: use primary NAC semaphore on E825 For E825 2xNAC configurations, PTP semaphore operations must hit the primary NAC register block so both sides coordinate on the same lock. Commit e2193f9f9ec9 ("ice: enable timesync operation on 2xNAC E825 devices") updated other primary-only PTP register accesses to use the primary NAC on non-primary functions, but left ice_ptp_lock() and ice_ptp_unlock() operating on the local NAC. As a result, secondary NAC PTP paths can take a different semaphore than the primary side. Select the primary hardware in ice_ptp_lock() and ice_ptp_unlock() when the current function is not primary, keeping semaphore operations symmetric and consistent with the rest of the 2xNAC PTP register access path. Fixes: e2193f9f9ec9 ("ice: enable timesync operation on 2xNAC E825 devices") Reviewed-by: Arkadiusz Kubalewski Signed-off-by: Grzegorz Nitka Reviewed-by: Aleksandr Loktionov Tested-by: Alexander Nowlin Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice_ptp_hw.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c index 8bb94e785f2a..2c18e16fe053 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_hw.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp_hw.c @@ -5264,9 +5264,13 @@ static void ice_ptp_init_phy_e830(struct ice_ptp_hw *ptp) */ bool ice_ptp_lock(struct ice_hw *hw) { + struct ice_pf *pf = container_of(hw, struct ice_pf, hw); u32 hw_lock; int i; + if (!ice_is_primary(hw)) + hw = ice_get_primary_hw(pf); + #define MAX_TRIES 15 for (i = 0; i < MAX_TRIES; i++) { @@ -5293,6 +5297,11 @@ bool ice_ptp_lock(struct ice_hw *hw) */ void ice_ptp_unlock(struct ice_hw *hw) { + struct ice_pf *pf = container_of(hw, struct ice_pf, hw); + + if (!ice_is_primary(hw)) + hw = ice_get_primary_hw(pf); + wr32(hw, PFTSYN_SEM + (PFTSYN_SEM_BYTES * hw->pf_id), 0); } -- cgit v1.2.3 From 975b564d195b13ca6ee1ef5e6a9561734898eb17 Mon Sep 17 00:00:00 2001 From: Grzegorz Nitka Date: Fri, 15 May 2026 11:24:13 -0700 Subject: ice: restore PTP Rx timestamp config after ethtool set-channels When ethtool -L changes queue counts, ice_vsi_recfg_qs() closes and rebuilds the VSI, reallocating Rx rings. The newly allocated rings have ptp_rx cleared, so RX hardware timestamps are no longer attached to skb until hwtstamp configuration is applied again. Restore timestamp mode after ice_vsi_open() in the queue reconfiguration path, matching reset/rebuild behavior and ensuring newly rebuilt Rx rings have PTP RX timestamping re-enabled. Testing hints: - run ptp4l application in client synchronization mode: ptp4l -i ethX -m -s - run PTP traffic - change queue number on ethX netdev interface: ethtool -L ethX combined new_queue_size - observe ptp4l output - expected result: no "received DELAY_REQ without timestamp" messages Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Cc: stable@vger.kernel.org Reviewed-by: Aleksandr Loktionov Signed-off-by: Grzegorz Nitka Reviewed-by: Simon Horman Tested-by: Alexander Nowlin Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-7-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ice/ice_main.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index 66642232b282..e2fbe111f849 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -4104,6 +4104,12 @@ int ice_vsi_recfg_qs(struct ice_vsi *vsi, int new_rx, int new_tx, bool locked) } ice_pf_dcb_recfg(pf, locked); ice_vsi_open(vsi); + /* Rx rings are reallocated during VSI rebuild and lose their ptp_rx + * flag. Restore timestamp mode so newly allocated rings are set up + * for hardware Rx timestamping. + */ + if (test_bit(ICE_FLAG_PTP_SUPPORTED, pf->flags)) + ice_ptp_restore_timestamp_mode(pf); goto done; rebuild_err: -- cgit v1.2.3 From 5d49b568c188dc77199d8d2b959c91da8cc27cf1 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Fri, 15 May 2026 11:24:14 -0700 Subject: ixgbevf: fix use-after-free in VEPA multicast source pruning ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's own address (VEPA multicast workaround) by freeing the skb and continuing to the next descriptor: dev_kfree_skb_irq(skb); continue; The skb pointer is declared outside the while loop and persists across iterations. Because the continue skips the "skb = NULL" reset at the bottom of the loop, the next iteration enters the "else if (skb)" path and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context. The sibling driver iavf already handles this correctly by nulling the pointer before continuing. Apply the same pattern here. I do not have ixgbevf hardware; the bug was found by static analysis (scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool corroboration with the highest score in the scan). The UAF was confirmed under KASAN by loading a test module that reproduces the exact code pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags): BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000 Read of size 8 at addr 000000006163ae78 by task insmod/30 freed 208-byte region [000000006163adc0, 000000006163ae90) QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF driver does not include the VEPA source pruning path, so a full end-to-end reproduction with emulated hardware was not possible. Fixes: bad17234ba70 ("ixgbevf: Change receive model to use double buffered page based receives") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Reviewed-by: Simon Horman Tested-by: Rafal Romanowski Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-8-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index 42f89a179a3f..4ba3be961ab6 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -1221,6 +1221,7 @@ static int ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector, ether_addr_equal(rx_ring->netdev->dev_addr, eth_hdr(skb)->h_source)) { dev_kfree_skb_irq(skb); + skb = NULL; continue; } -- cgit v1.2.3 From 5acc641e590e008caaed480ed9ffae47cf7ecbdf Mon Sep 17 00:00:00 2001 From: Kohei Enju Date: Fri, 15 May 2026 11:24:15 -0700 Subject: igc: set tx buffer type for SMD frames Sashiko pointed out that igc_fpe_init_smd_frame() initializes igc_tx_buffer fields for an SMD skb, but does not set the buffer type: https://sashiko.dev/#/patchset/20260415025226.114115-1-kohei%40enjuk.jp Since igc_tx_buffer entries are reused, a stale XDP or XSK type can remain and make TX completion use the wrong cleanup path. Set the buffer type to IGC_TX_BUFFER_TYPE_SKB. Fixes: 5422570c0010 ("igc: add support for frame preemption verification") Signed-off-by: Kohei Enju Reviewed-by: Aleksandr Loktionov Reviewed-by: Simon Horman Tested-by: Avigail Dahan Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-9-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/igc/igc_tsn.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c index 8a110145bfee..725ba253165c 100644 --- a/drivers/net/ethernet/intel/igc/igc_tsn.c +++ b/drivers/net/ethernet/intel/igc/igc_tsn.c @@ -34,6 +34,7 @@ static int igc_fpe_init_smd_frame(struct igc_ring *ring, return -ENOMEM; } + buffer->type = IGC_TX_BUFFER_TYPE_SKB; buffer->skb = skb; buffer->protocol = 0; buffer->bytecount = skb->len; -- cgit v1.2.3 From e935c37b8a94bb256fada6395a5d05e1c0c6bdaf Mon Sep 17 00:00:00 2001 From: Kohei Enju Date: Fri, 15 May 2026 11:24:16 -0700 Subject: igc: fix potential skb leak in igc_fpe_xmit_smd_frame() When igc_fpe_init_tx_descriptor() fails, no one takes care of an allocated skb, leaking it. [1] Use dev_kfree_skb_any() on failure. Tested on an I226 adapter with the following command, while injecting faults in igc_fpe_init_tx_descriptor() to trigger the error path. # ethtool --set-mm $DEV verify-enabled on tx-enabled on pmac-enabled on [1] unreferenced object 0xffff888113c6cdc0 (size 224): ... backtrace (crc be3d3fda): kmem_cache_alloc_node_noprof+0x3b1/0x410 __alloc_skb+0xde/0x830 igc_fpe_xmit_smd_frame.isra.0+0xad/0x1b0 igc_fpe_send_mpacket+0x37/0x90 ethtool_mmsv_verify_timer+0x15e/0x300 Cc: stable@vger.kernel.org Fixes: 5422570c0010 ("igc: add support for frame preemption verification") Signed-off-by: Kohei Enju Reviewed-by: Simon Horman Reviewed-by: Faizal Rahim Tested-by: Avigail Dahan Signed-off-by: Tony Nguyen Link: https://patch.msgid.link/20260515182419.1597859-10-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/intel/igc/igc_tsn.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/igc/igc_tsn.c b/drivers/net/ethernet/intel/igc/igc_tsn.c index 725ba253165c..52de2bcbadbe 100644 --- a/drivers/net/ethernet/intel/igc/igc_tsn.c +++ b/drivers/net/ethernet/intel/igc/igc_tsn.c @@ -110,10 +110,16 @@ static int igc_fpe_xmit_smd_frame(struct igc_adapter *adapter, __netif_tx_lock(nq, cpu); err = igc_fpe_init_tx_descriptor(ring, skb, type); - igc_flush_tx_descriptors(ring); + if (err) + goto err_free_skb_any; + igc_flush_tx_descriptors(ring); __netif_tx_unlock(nq); + return 0; +err_free_skb_any: + __netif_tx_unlock(nq); + dev_kfree_skb_any(skb); return err; } -- cgit v1.2.3 From f8ce8b8331a1bc44ad4905886a482214d428b253 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 9 May 2026 22:44:12 +0200 Subject: batman-adv: v: stop OGMv2 on disabled interface When a batadv_hard_iface is disabled, its mesh_iface pointer is set to NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via batadv_v_ogm_queue_on_if() for interfaces that have since lost their mesh_iface association. This results in a NULL pointer dereference when batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the now NULL hard_iface->mesh_iface to retrieve the batadv_priv. It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was called. Cc: stable@kernel.org Fixes: 0da0035942d4 ("batman-adv: OGMv2 - add basic infrastructure") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann --- net/batman-adv/bat_v_ogm.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) diff --git a/net/batman-adv/bat_v_ogm.c b/net/batman-adv/bat_v_ogm.c index e3870492dab7..e955b4940c72 100644 --- a/net/batman-adv/bat_v_ogm.c +++ b/net/batman-adv/bat_v_ogm.c @@ -113,14 +113,14 @@ static void batadv_v_ogm_start_timer(struct batadv_priv *bat_priv) /** * batadv_v_ogm_send_to_if() - send a batman ogm using a given interface + * @bat_priv: the bat priv with all the mesh interface information * @skb: the OGM to send * @hard_iface: the interface to use to send the OGM */ -static void batadv_v_ogm_send_to_if(struct sk_buff *skb, +static void batadv_v_ogm_send_to_if(struct batadv_priv *bat_priv, + struct sk_buff *skb, struct batadv_hard_iface *hard_iface) { - struct batadv_priv *bat_priv = netdev_priv(hard_iface->mesh_iface); - if (hard_iface->if_status != BATADV_IF_ACTIVE) { kfree_skb(skb); return; @@ -187,6 +187,7 @@ static void batadv_v_ogm_aggr_list_free(struct batadv_hard_iface *hard_iface) /** * batadv_v_ogm_aggr_send() - flush & send aggregation queue + * @bat_priv: the bat priv with all the mesh interface information * @hard_iface: the interface with the aggregation queue to flush * * Aggregates all OGMv2 packets currently in the aggregation queue into a @@ -196,7 +197,8 @@ static void batadv_v_ogm_aggr_list_free(struct batadv_hard_iface *hard_iface) * * Caller needs to hold the hard_iface->bat_v.aggr_list.lock. */ -static void batadv_v_ogm_aggr_send(struct batadv_hard_iface *hard_iface) +static void batadv_v_ogm_aggr_send(struct batadv_priv *bat_priv, + struct batadv_hard_iface *hard_iface) { unsigned int aggr_len = hard_iface->bat_v.aggr_len; struct sk_buff *skb_aggr; @@ -226,27 +228,32 @@ static void batadv_v_ogm_aggr_send(struct batadv_hard_iface *hard_iface) consume_skb(skb); } - batadv_v_ogm_send_to_if(skb_aggr, hard_iface); + batadv_v_ogm_send_to_if(bat_priv, skb_aggr, hard_iface); } /** * batadv_v_ogm_queue_on_if() - queue a batman ogm on a given interface + * @bat_priv: the bat priv with all the mesh interface information * @skb: the OGM to queue * @hard_iface: the interface to queue the OGM on */ -static void batadv_v_ogm_queue_on_if(struct sk_buff *skb, +static void batadv_v_ogm_queue_on_if(struct batadv_priv *bat_priv, + struct sk_buff *skb, struct batadv_hard_iface *hard_iface) { - struct batadv_priv *bat_priv = netdev_priv(hard_iface->mesh_iface); + if (hard_iface->mesh_iface != bat_priv->mesh_iface) { + kfree_skb(skb); + return; + } if (!atomic_read(&bat_priv->aggregated_ogms)) { - batadv_v_ogm_send_to_if(skb, hard_iface); + batadv_v_ogm_send_to_if(bat_priv, skb, hard_iface); return; } spin_lock_bh(&hard_iface->bat_v.aggr_list.lock); if (!batadv_v_ogm_queue_left(skb, hard_iface)) - batadv_v_ogm_aggr_send(hard_iface); + batadv_v_ogm_aggr_send(bat_priv, hard_iface); hard_iface->bat_v.aggr_len += batadv_v_ogm_len(skb); __skb_queue_tail(&hard_iface->bat_v.aggr_list, skb); @@ -343,7 +350,7 @@ static void batadv_v_ogm_send_meshif(struct batadv_priv *bat_priv) break; } - batadv_v_ogm_queue_on_if(skb_tmp, hard_iface); + batadv_v_ogm_queue_on_if(bat_priv, skb_tmp, hard_iface); batadv_hardif_put(hard_iface); } rcu_read_unlock(); @@ -383,12 +390,14 @@ void batadv_v_ogm_aggr_work(struct work_struct *work) { struct batadv_hard_iface_bat_v *batv; struct batadv_hard_iface *hard_iface; + struct batadv_priv *bat_priv; batv = container_of(work, struct batadv_hard_iface_bat_v, aggr_wq.work); hard_iface = container_of(batv, struct batadv_hard_iface, bat_v); + bat_priv = netdev_priv(hard_iface->mesh_iface); spin_lock_bh(&hard_iface->bat_v.aggr_list.lock); - batadv_v_ogm_aggr_send(hard_iface); + batadv_v_ogm_aggr_send(bat_priv, hard_iface); spin_unlock_bh(&hard_iface->bat_v.aggr_list.lock); batadv_v_ogm_start_queue_timer(hard_iface); @@ -578,7 +587,7 @@ static void batadv_v_ogm_forward(struct batadv_priv *bat_priv, if_outgoing->net_dev->name, ntohl(ogm_forward->throughput), ogm_forward->ttl, if_incoming->net_dev->name); - batadv_v_ogm_queue_on_if(skb, if_outgoing); + batadv_v_ogm_queue_on_if(bat_priv, skb, if_outgoing); out: batadv_orig_ifinfo_put(orig_ifinfo); -- cgit v1.2.3 From 501368506563e151b322c8c3f228b796e615b90d Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 14 May 2026 16:33:12 +0200 Subject: batman-adv: tvlv: abort OGM send on tvlv append failure batadv_tvlv_container_ogm_append() could fail in two ways: a memory allocation failure when resizing the packet buffer, or the tvlv data exceeding U16_MAX bytes. In both cases the function previously returned the old (now stale) tvlv_value_len rather than signalling an error, causing the OGM/OGM2 send path to transmit a packet whose TVLV length field no longer matched the actual buffer contents. And because it also didn't fill in the new TVLV data, sending either uninitialized or corrupted data on the wire. All errors in batadv_tvlv_container_ogm_append() must be forwarded to the caller. And the caller must abort the send of the OGM2. For B.A.T.M.A.N. IV, it is currently not allowed to abort the send. The non-TVLV part of the OGM must be queued up instead. Cc: stable@kernel.org Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure") Signed-off-by: Sven Eckelmann --- net/batman-adv/bat_iv_ogm.c | 16 +++++++++++++--- net/batman-adv/bat_v_ogm.c | 26 ++++++++++++++------------ net/batman-adv/tvlv.c | 17 ++++++++++++----- net/batman-adv/tvlv.h | 2 +- 4 files changed, 40 insertions(+), 21 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 74ef7dc2b2f9..7ad26128b5f7 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -790,6 +790,7 @@ static void batadv_iv_ogm_schedule_buff(struct batadv_hard_iface *hard_iface) u32 seqno; u16 tvlv_len = 0; unsigned long send_time; + int ret; lockdep_assert_held(&hard_iface->bat_iv.ogm_buff_mutex); @@ -813,9 +814,18 @@ static void batadv_iv_ogm_schedule_buff(struct batadv_hard_iface *hard_iface) * appended as it may alter the tt tvlv container */ batadv_tt_local_commit_changes(bat_priv); - tvlv_len = batadv_tvlv_container_ogm_append(bat_priv, ogm_buff, - ogm_buff_len, - BATADV_OGM_HLEN); + ret = batadv_tvlv_container_ogm_append(bat_priv, ogm_buff, + ogm_buff_len, + BATADV_OGM_HLEN); + if (ret < 0) { + /* OGMs must be queued even when the buffer allocation for + * TVLVs failed. just fall back to the non-TVLV version + */ + ret = 0; + *ogm_buff_len = BATADV_OGM_HLEN; + } + + tvlv_len = ret; } batadv_ogm_packet = (struct batadv_ogm_packet *)(*ogm_buff); diff --git a/net/batman-adv/bat_v_ogm.c b/net/batman-adv/bat_v_ogm.c index e955b4940c72..d66ca77b1aaa 100644 --- a/net/batman-adv/bat_v_ogm.c +++ b/net/batman-adv/bat_v_ogm.c @@ -269,10 +269,10 @@ static void batadv_v_ogm_send_meshif(struct batadv_priv *bat_priv) struct batadv_hard_iface *hard_iface; struct batadv_ogm2_packet *ogm_packet; struct sk_buff *skb, *skb_tmp; - unsigned char *ogm_buff; + unsigned char **ogm_buff; struct list_head *iter; - int ogm_buff_len; - u16 tvlv_len = 0; + int *ogm_buff_len; + u16 tvlv_len; int ret; lockdep_assert_held(&bat_priv->bat_v.ogm_buff_mutex); @@ -280,25 +280,27 @@ static void batadv_v_ogm_send_meshif(struct batadv_priv *bat_priv) if (atomic_read(&bat_priv->mesh_state) == BATADV_MESH_DEACTIVATING) goto out; - ogm_buff = bat_priv->bat_v.ogm_buff; - ogm_buff_len = bat_priv->bat_v.ogm_buff_len; + ogm_buff = &bat_priv->bat_v.ogm_buff; + ogm_buff_len = &bat_priv->bat_v.ogm_buff_len; + /* tt changes have to be committed before the tvlv data is * appended as it may alter the tt tvlv container */ batadv_tt_local_commit_changes(bat_priv); - tvlv_len = batadv_tvlv_container_ogm_append(bat_priv, &ogm_buff, - &ogm_buff_len, - BATADV_OGM2_HLEN); + ret = batadv_tvlv_container_ogm_append(bat_priv, ogm_buff, + ogm_buff_len, + BATADV_OGM2_HLEN); + if (ret < 0) + goto reschedule; - bat_priv->bat_v.ogm_buff = ogm_buff; - bat_priv->bat_v.ogm_buff_len = ogm_buff_len; + tvlv_len = ret; - skb = netdev_alloc_skb_ip_align(NULL, ETH_HLEN + ogm_buff_len); + skb = netdev_alloc_skb_ip_align(NULL, ETH_HLEN + *ogm_buff_len); if (!skb) goto reschedule; skb_reserve(skb, ETH_HLEN); - skb_put_data(skb, ogm_buff, ogm_buff_len); + skb_put_data(skb, *ogm_buff, *ogm_buff_len); ogm_packet = (struct batadv_ogm2_packet *)skb->data; ogm_packet->seqno = htonl(atomic_read(&bat_priv->bat_v.ogm_seqno)); diff --git a/net/batman-adv/tvlv.c b/net/batman-adv/tvlv.c index 8129a3f9c44d..46ed61dbf087 100644 --- a/net/batman-adv/tvlv.c +++ b/net/batman-adv/tvlv.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include @@ -306,9 +307,10 @@ static bool batadv_tvlv_realloc_packet_buff(unsigned char **packet_buff, * The ogm packet might be enlarged or shrunk depending on the current size * and the size of the to-be-appended tvlv containers. * - * Return: size of all appended tvlv containers in bytes. + * Return: size of all appended tvlv containers in bytes (max U16_MAX), negative + * if operation failed */ -u16 batadv_tvlv_container_ogm_append(struct batadv_priv *bat_priv, +int batadv_tvlv_container_ogm_append(struct batadv_priv *bat_priv, unsigned char **packet_buff, int *packet_buff_len, int packet_min_len) { @@ -316,6 +318,7 @@ u16 batadv_tvlv_container_ogm_append(struct batadv_priv *bat_priv, struct batadv_tvlv_hdr *tvlv_hdr; u16 tvlv_value_len; void *tvlv_value; + int tvlv_len_ret; bool ret; spin_lock_bh(&bat_priv->tvlv.container_list_lock); @@ -323,9 +326,12 @@ u16 batadv_tvlv_container_ogm_append(struct batadv_priv *bat_priv, ret = batadv_tvlv_realloc_packet_buff(packet_buff, packet_buff_len, packet_min_len, tvlv_value_len); - - if (!ret) + if (!ret) { + tvlv_len_ret = -ENOMEM; goto end; + } + + tvlv_len_ret = tvlv_value_len; if (!tvlv_value_len) goto end; @@ -344,7 +350,8 @@ u16 batadv_tvlv_container_ogm_append(struct batadv_priv *bat_priv, end: spin_unlock_bh(&bat_priv->tvlv.container_list_lock); - return tvlv_value_len; + + return tvlv_len_ret; } /** diff --git a/net/batman-adv/tvlv.h b/net/batman-adv/tvlv.h index e5697230d991..f96f6b3f44a0 100644 --- a/net/batman-adv/tvlv.h +++ b/net/batman-adv/tvlv.h @@ -16,7 +16,7 @@ void batadv_tvlv_container_register(struct batadv_priv *bat_priv, u8 type, u8 version, void *tvlv_value, u16 tvlv_value_len); -u16 batadv_tvlv_container_ogm_append(struct batadv_priv *bat_priv, +int batadv_tvlv_container_ogm_append(struct batadv_priv *bat_priv, unsigned char **packet_buff, int *packet_buff_len, int packet_min_len); void batadv_tvlv_ogm_receive(struct batadv_priv *bat_priv, -- cgit v1.2.3 From f50487e3566358b2b982b7801945e858c78ad9ab Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 9 May 2026 21:55:29 +0200 Subject: batman-adv: tvlv: reject oversized TVLV packets batadv_tvlv_container_ogm_append() builds a TVLV packet section from the tvlv.container_list. The total size of this section is computed by batadv_tvlv_container_list_size(), which sums the sizes of all registered containers. The return type and accumulator in batadv_tvlv_container_list_size() were u16. If the accumulated size exceeds U16_MAX, the value wraps around, causing the subsequent allocation in batadv_tvlv_container_ogm_append() to be undersized. The memcpy-style copy that follows would then write beyond the end of the allocated buffer, corrupting kernel memory. Fix this by widening the return type of batadv_tvlv_container_list_size() to size_t. In batadv_tvlv_container_ogm_append(), check the computed length against U16_MAX before proceeding, and bail out as if the allocation had failed when the limit is exceeded. Cc: stable@kernel.org Fixes: ef26157747d4 ("batman-adv: tvlv - basic infrastructure") Reported-by: Yuan Tan Reported-by: Yifan Wu Reported-by: Juefei Pu Reported-by: Xin Liu Reviewed-by: Yuan Tan Signed-off-by: Sven Eckelmann --- net/batman-adv/tvlv.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/batman-adv/tvlv.c b/net/batman-adv/tvlv.c index 46ed61dbf087..cc6ac580c620 100644 --- a/net/batman-adv/tvlv.c +++ b/net/batman-adv/tvlv.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include @@ -160,10 +161,10 @@ batadv_tvlv_container_get(struct batadv_priv *bat_priv, u8 type, u8 version) * * Return: size of all currently registered tvlv containers in bytes. */ -static u16 batadv_tvlv_container_list_size(struct batadv_priv *bat_priv) +static size_t batadv_tvlv_container_list_size(struct batadv_priv *bat_priv) { struct batadv_tvlv_container *tvlv; - u16 tvlv_len = 0; + size_t tvlv_len = 0; lockdep_assert_held(&bat_priv->tvlv.container_list_lock); @@ -316,13 +317,17 @@ int batadv_tvlv_container_ogm_append(struct batadv_priv *bat_priv, { struct batadv_tvlv_container *tvlv; struct batadv_tvlv_hdr *tvlv_hdr; - u16 tvlv_value_len; + size_t tvlv_value_len; void *tvlv_value; int tvlv_len_ret; bool ret; spin_lock_bh(&bat_priv->tvlv.container_list_lock); tvlv_value_len = batadv_tvlv_container_list_size(bat_priv); + if (tvlv_value_len > U16_MAX) { + tvlv_len_ret = -E2BIG; + goto end; + } ret = batadv_tvlv_realloc_packet_buff(packet_buff, packet_buff_len, packet_min_len, tvlv_value_len); -- cgit v1.2.3 From 71dce47f0758537fff78fddb5fb0d4632d29b29f Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Wed, 13 May 2026 23:38:54 +0200 Subject: batman-adv: tp_meter: fix race condition in send error reporting batadv_tp_sender_shutdown() previously used two separate variables to track session state: sending (an atomic flag indicating whether the session was active) and reason (a plain enum storing the stop reason). This introduced a race window between the two writes: after sending was cleared to 0, batadv_tp_send() could observe the stopped state and call batadv_tp_sender_end() before reason was written, causing the wrong stop reason to be reported to the caller. Fix this by consolidating both variables into a single atomic send_result, which holds 0 while the session is running and the stop reason once it ends. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann --- net/batman-adv/tp_meter.c | 40 +++++++++++++++++++++++++--------------- net/batman-adv/types.h | 10 +++++----- 2 files changed, 30 insertions(+), 20 deletions(-) diff --git a/net/batman-adv/tp_meter.c b/net/batman-adv/tp_meter.c index 1fd1526059d8..3ce6d9b2c9f3 100644 --- a/net/batman-adv/tp_meter.c +++ b/net/batman-adv/tp_meter.c @@ -413,11 +413,14 @@ static void batadv_tp_sender_cleanup(struct batadv_tp_vars *tp_vars) static void batadv_tp_sender_end(struct batadv_priv *bat_priv, struct batadv_tp_vars *tp_vars) { + enum batadv_tp_meter_reason reason; u32 session_cookie; + reason = atomic_read(&tp_vars->send_result); + batadv_dbg(BATADV_DBG_TP_METER, bat_priv, "Test towards %pM finished..shutting down (reason=%d)\n", - tp_vars->other_end, tp_vars->reason); + tp_vars->other_end, reason); batadv_dbg(BATADV_DBG_TP_METER, bat_priv, "Last timing stats: SRTT=%ums RTTVAR=%ums RTO=%ums\n", @@ -430,7 +433,7 @@ static void batadv_tp_sender_end(struct batadv_priv *bat_priv, session_cookie = batadv_tp_session_cookie(tp_vars->session, tp_vars->icmp_uid); - batadv_tp_batctl_notify(tp_vars->reason, + batadv_tp_batctl_notify(reason, tp_vars->other_end, bat_priv, tp_vars->start_time, @@ -446,10 +449,18 @@ static void batadv_tp_sender_end(struct batadv_priv *bat_priv, static void batadv_tp_sender_shutdown(struct batadv_tp_vars *tp_vars, enum batadv_tp_meter_reason reason) { - if (atomic_xchg(&tp_vars->sending, 0) != 1) - return; + atomic_cmpxchg(&tp_vars->send_result, 0, reason); +} - tp_vars->reason = reason; +/** + * batadv_tp_sender_stopped() - check if tp session was stopped with reason + * @tp_vars: the private data of the current TP meter session + * + * Return: whether stop reason was found + */ +static bool batadv_tp_sender_stopped(struct batadv_tp_vars *tp_vars) +{ + return atomic_read(&tp_vars->send_result) != 0; } /** @@ -479,7 +490,7 @@ static void batadv_tp_reset_sender_timer(struct batadv_tp_vars *tp_vars) /* most of the time this function is invoked while normal packet * reception... */ - if (unlikely(atomic_read(&tp_vars->sending) == 0)) + if (unlikely(batadv_tp_sender_stopped(tp_vars))) /* timer ref will be dropped in batadv_tp_sender_cleanup */ return; @@ -499,7 +510,7 @@ static void batadv_tp_sender_timeout(struct timer_list *t) struct batadv_tp_vars *tp_vars = timer_container_of(tp_vars, t, timer); struct batadv_priv *bat_priv = tp_vars->bat_priv; - if (atomic_read(&tp_vars->sending) == 0) + if (batadv_tp_sender_stopped(tp_vars)) return; /* if the user waited long enough...shutdown the test */ @@ -661,7 +672,7 @@ static void batadv_tp_recv_ack(struct batadv_priv *bat_priv, if (unlikely(tp_vars->role != BATADV_TP_SENDER)) goto out; - if (unlikely(atomic_read(&tp_vars->sending) == 0)) + if (unlikely(batadv_tp_sender_stopped(tp_vars))) goto out; /* old ACK? silently drop it.. */ @@ -827,21 +838,21 @@ static int batadv_tp_send(void *arg) if (unlikely(tp_vars->role != BATADV_TP_SENDER)) { err = BATADV_TP_REASON_DST_UNREACHABLE; - tp_vars->reason = err; + batadv_tp_sender_shutdown(tp_vars, err); goto out; } orig_node = batadv_orig_hash_find(bat_priv, tp_vars->other_end); if (unlikely(!orig_node)) { err = BATADV_TP_REASON_DST_UNREACHABLE; - tp_vars->reason = err; + batadv_tp_sender_shutdown(tp_vars, err); goto out; } primary_if = batadv_primary_if_get_selected(bat_priv); if (unlikely(!primary_if)) { err = BATADV_TP_REASON_DST_UNREACHABLE; - tp_vars->reason = err; + batadv_tp_sender_shutdown(tp_vars, err); goto out; } @@ -860,7 +871,7 @@ static int batadv_tp_send(void *arg) queue_delayed_work(batadv_event_workqueue, &tp_vars->finish_work, msecs_to_jiffies(tp_vars->test_length)); - while (atomic_read(&tp_vars->sending) != 0) { + while (!batadv_tp_sender_stopped(tp_vars)) { if (unlikely(!batadv_tp_avail(tp_vars, payload_len))) { batadv_tp_wait_available(tp_vars, payload_len); continue; @@ -883,8 +894,7 @@ static int batadv_tp_send(void *arg) "Meter: %s() cannot send packets (%d)\n", __func__, err); /* ensure nobody else tries to stop the thread now */ - if (atomic_xchg(&tp_vars->sending, 0) == 1) - tp_vars->reason = err; + batadv_tp_sender_shutdown(tp_vars, err); break; } @@ -1006,7 +1016,7 @@ void batadv_tp_start(struct batadv_priv *bat_priv, const u8 *dst, ether_addr_copy(tp_vars->other_end, dst); kref_init(&tp_vars->refcount); tp_vars->role = BATADV_TP_SENDER; - atomic_set(&tp_vars->sending, 1); + atomic_set(&tp_vars->send_result, 0); memcpy(tp_vars->session, session_id, sizeof(session_id)); tp_vars->icmp_uid = icmp_uid; diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index c8c3e8064f00..fb0e4cb89d79 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -1320,15 +1320,15 @@ struct batadv_tp_vars { /** @role: receiver/sender modi */ enum batadv_tp_meter_role role; - /** @sending: sending binary semaphore: 1 if sending, 0 is not */ - atomic_t sending; + /** + * @send_result: 0 when sending is ongoing and otherwise + * enum batadv_tp_meter_reason + */ + atomic_t send_result; /** @receiving: receiving binary semaphore: 1 if receiving, 0 is not */ atomic_t receiving; - /** @reason: reason for a stopped session */ - enum batadv_tp_meter_reason reason; - /** @finish_work: work item for the finishing procedure */ struct delayed_work finish_work; -- cgit v1.2.3 From ff24f2ecfd94c07a2b89bac497433e3b23271cac Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 16 May 2026 12:33:41 +0200 Subject: batman-adv: tp_meter: avoid role confusion in tp_list Session lookups in tp_list matched only on destination address (and optionally session ID), leaving role validation to the caller. If two sessions with the same other_end coexisted (one as sender, one as receiver) a lookup could silently return the wrong one, causing the caller's role to bail out early, potentially skipping necessary cleanup. Move the role check into the lookup functions themselves so the correct entry is always returned, or none at all. Since batadv_tp_start() legitimately needs to detect any active session to a destination regardless of role, introduce a dedicated helper for that case rather than bending the existing lookup semantics. Cc: stable@kernel.org Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Signed-off-by: Sven Eckelmann --- net/batman-adv/tp_meter.c | 59 +++++++++++++++++++++++++++++------------------ 1 file changed, 36 insertions(+), 23 deletions(-) diff --git a/net/batman-adv/tp_meter.c b/net/batman-adv/tp_meter.c index 3ce6d9b2c9f3..0fc4ca78e84e 100644 --- a/net/batman-adv/tp_meter.c +++ b/net/batman-adv/tp_meter.c @@ -255,6 +255,7 @@ static void batadv_tp_batctl_error_notify(enum batadv_tp_meter_reason reason, * batadv_tp_list_find() - find a tp_vars object in the global list * @bat_priv: the bat priv with all the mesh interface information * @dst: the other endpoint MAC address to look for + * @role: role of the session * * Look for a tp_vars object matching dst as end_point and return it after * having increment the refcounter. Return NULL is not found @@ -262,7 +263,8 @@ static void batadv_tp_batctl_error_notify(enum batadv_tp_meter_reason reason, * Return: matching tp_vars or NULL when no tp_vars with @dst was found */ static struct batadv_tp_vars *batadv_tp_list_find(struct batadv_priv *bat_priv, - const u8 *dst) + const u8 *dst, + enum batadv_tp_meter_role role) { struct batadv_tp_vars *pos, *tp_vars = NULL; @@ -271,6 +273,9 @@ static struct batadv_tp_vars *batadv_tp_list_find(struct batadv_priv *bat_priv, if (!batadv_compare_eth(pos->other_end, dst)) continue; + if (pos->role != role) + continue; + /* most of the time this function is invoked during the normal * process..it makes sens to pay more when the session is * finished and to speed the process up during the measurement @@ -286,12 +291,33 @@ static struct batadv_tp_vars *batadv_tp_list_find(struct batadv_priv *bat_priv, return tp_vars; } +/** + * batadv_tp_list_active() - check if session from/to destination is ongoing + * @bat_priv: the bat priv with all the mesh interface information + * @dst: the other endpoint MAC address to look for + * + * Return: if matching session with @dst was found + */ +static bool batadv_tp_list_active(struct batadv_priv *bat_priv, const u8 *dst) + __must_hold(&bat_priv->tp_list_lock) +{ + struct batadv_tp_vars *tp_vars; + + hlist_for_each_entry_rcu(tp_vars, &bat_priv->tp_list, list) { + if (batadv_compare_eth(tp_vars->other_end, dst)) + return true; + } + + return false; +} + /** * batadv_tp_list_find_session() - find tp_vars session object in the global * list * @bat_priv: the bat priv with all the mesh interface information * @dst: the other endpoint MAC address to look for * @session: session identifier + * @role: role of the session * * Look for a tp_vars object matching dst as end_point, session as tp meter * session and return it after having increment the refcounter. Return NULL @@ -301,7 +327,7 @@ static struct batadv_tp_vars *batadv_tp_list_find(struct batadv_priv *bat_priv, */ static struct batadv_tp_vars * batadv_tp_list_find_session(struct batadv_priv *bat_priv, const u8 *dst, - const u8 *session) + const u8 *session, enum batadv_tp_meter_role role) { struct batadv_tp_vars *pos, *tp_vars = NULL; @@ -313,6 +339,9 @@ batadv_tp_list_find_session(struct batadv_priv *bat_priv, const u8 *dst, if (memcmp(pos->session, session, sizeof(pos->session)) != 0) continue; + if (pos->role != role) + continue; + /* most of the time this function is invoked during the normal * process..it makes sense to pay more when the session is * finished and to speed the process up during the measurement @@ -665,13 +694,10 @@ static void batadv_tp_recv_ack(struct batadv_priv *bat_priv, /* find the tp_vars */ tp_vars = batadv_tp_list_find_session(bat_priv, icmp->orig, - icmp->session); + icmp->session, BATADV_TP_SENDER); if (unlikely(!tp_vars)) return; - if (unlikely(tp_vars->role != BATADV_TP_SENDER)) - goto out; - if (unlikely(batadv_tp_sender_stopped(tp_vars))) goto out; @@ -980,10 +1006,8 @@ void batadv_tp_start(struct batadv_priv *bat_priv, const u8 *dst, return; } - tp_vars = batadv_tp_list_find(bat_priv, dst); - if (tp_vars) { + if (batadv_tp_list_active(bat_priv, dst)) { spin_unlock_bh(&bat_priv->tp_list_lock); - batadv_tp_vars_put(tp_vars); batadv_dbg(BATADV_DBG_TP_METER, bat_priv, "Meter: test to or from the same node already ongoing, aborting\n"); batadv_tp_batctl_error_notify(BATADV_TP_REASON_ALREADY_ONGOING, @@ -1104,18 +1128,14 @@ void batadv_tp_stop(struct batadv_priv *bat_priv, const u8 *dst, if (!orig_node) return; - tp_vars = batadv_tp_list_find(bat_priv, orig_node->orig); + tp_vars = batadv_tp_list_find(bat_priv, orig_node->orig, BATADV_TP_SENDER); if (!tp_vars) { batadv_dbg(BATADV_DBG_TP_METER, bat_priv, "Meter: trying to interrupt an already over connection\n"); goto out_put_orig_node; } - if (unlikely(tp_vars->role != BATADV_TP_SENDER)) - goto out_put_tp_vars; - batadv_tp_sender_shutdown(tp_vars, return_value); -out_put_tp_vars: batadv_tp_vars_put(tp_vars); out_put_orig_node: batadv_orig_node_put(orig_node); @@ -1371,7 +1391,7 @@ batadv_tp_init_recv(struct batadv_priv *bat_priv, goto out_unlock; tp_vars = batadv_tp_list_find_session(bat_priv, icmp->orig, - icmp->session); + icmp->session, BATADV_TP_RECEIVER); if (tp_vars) goto out_unlock; @@ -1442,7 +1462,7 @@ static void batadv_tp_recv_msg(struct batadv_priv *bat_priv, } } else { tp_vars = batadv_tp_list_find_session(bat_priv, icmp->orig, - icmp->session); + icmp->session, BATADV_TP_RECEIVER); if (!tp_vars) { batadv_dbg(BATADV_DBG_TP_METER, bat_priv, "Unexpected packet from %pM!\n", @@ -1451,13 +1471,6 @@ static void batadv_tp_recv_msg(struct batadv_priv *bat_priv, } } - if (unlikely(tp_vars->role != BATADV_TP_RECEIVER)) { - batadv_dbg(BATADV_DBG_TP_METER, bat_priv, - "Meter: dropping packet: not expected (role=%u)\n", - tp_vars->role); - goto out; - } - tp_vars->last_recv_time = jiffies; /* if the packet is a duplicate, it may be the case that an ACK has been -- cgit v1.2.3 From 20c2d6a20ca936f5aaa6dd40f73f262ac45c87cc Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Thu, 14 May 2026 19:22:02 +0200 Subject: batman-adv: mcast: fix use-after-free in orig_node RCU release MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit batadv_mcast_purge_orig() removes entries from RCU-protected hlists but does not wait for an RCU grace period before returning. Concurrent RCU readers may still accesses references to those entries at the point of removal. RCU-protected readers trying to operate on entries like orig->mcast_want_all_ipv6_node will then access already freed memory. Fix this by moving batadv_mcast_purge_orig() to batadv_orig_node_release(), just before the call_rcu() invocation. This ensures RCU readers that were active at purge time have drained before the orig_node memory is reclaimed. Cc: stable@kernel.org Fixes: ab49886e3da7 ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Acked-by: Linus Lüssing Signed-off-by: Sven Eckelmann --- net/batman-adv/originator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/originator.c b/net/batman-adv/originator.c index b3468ccab535..ad4921b659d9 100644 --- a/net/batman-adv/originator.c +++ b/net/batman-adv/originator.c @@ -835,8 +835,6 @@ static void batadv_orig_node_free_rcu(struct rcu_head *rcu) orig_node = container_of(rcu, struct batadv_orig_node, rcu); - batadv_mcast_purge_orig(orig_node); - batadv_frag_purge_orig(orig_node, NULL); kfree(orig_node->tt_buff); @@ -887,6 +885,8 @@ void batadv_orig_node_release(struct kref *ref) } spin_unlock_bh(&orig_node->vlan_list_lock); + batadv_mcast_purge_orig(orig_node); + call_rcu(&orig_node->rcu, batadv_orig_node_free_rcu); } -- cgit v1.2.3 From 86ed2d96db1965e9008e919b1936145ae66540e3 Mon Sep 17 00:00:00 2001 From: Chaitanya Kumar Borah Date: Mon, 11 May 2026 11:02:10 +0530 Subject: drm/i915/display: Copy color pipeline from plane in the primary joiner pipe When copying plane color state in a joiner configuration, use the plane in the primary joiner pipe since it carries the pipeline number selected by the user-space. This assumes that all pipes in the joiner are symmetric in their plane color capabilities. Cc: stable@vger.kernel.org # v6.19+ Fixes: a78f1b6baf4d ("drm/i915/color: Add framework to program CSC") Tested-by: Vidya Srinivas Signed-off-by: Chaitanya Kumar Borah Reviewed-by: Uma Shankar Signed-off-by: Ankit Nautiyal Link: https://patch.msgid.link/20260511053213.3122314-2-chaitanya.kumar.borah@intel.com (cherry picked from commit e8308fb5e05ca08ddfb8b46f6d947a6e3fd80cd7) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_plane.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_plane.c b/drivers/gpu/drm/i915/display/intel_plane.c index 5390ceb21ca4..82f445c83158 100644 --- a/drivers/gpu/drm/i915/display/intel_plane.c +++ b/drivers/gpu/drm/i915/display/intel_plane.c @@ -373,7 +373,7 @@ intel_plane_color_copy_uapi_to_hw_state(struct intel_plane_state *plane_state, bool changed = false; int i = 0; - iter_colorop = plane_state->uapi.color_pipeline; + iter_colorop = from_plane_state->uapi.color_pipeline; while (iter_colorop) { for_each_new_colorop_in_state(state, colorop, new_colorop_state, i) { -- cgit v1.2.3 From f87abd0c6604fb6cc31cc86fc7ccc6a576924352 Mon Sep 17 00:00:00 2001 From: Ankit Nautiyal Date: Mon, 11 May 2026 18:02:15 +0530 Subject: drm/i915/dp: Fix readback for target_rr in Adaptive Sync SDP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Correct the bit-shift logic to properly readback the 10 bit target_rr from DB3 and DB4. v2: Align the style with readback for vtotal. (Ville) Fixes: 12ea89291603 ("drm/i915/dp: Add Read/Write support for Adaptive Sync SDP") Cc: Mitul Golani Cc: Ankit Nautiyal Signed-off-by: Ankit Nautiyal Reviewed-by: Ville Syrjälä Link: https://patch.msgid.link/20260511123218.1589830-2-ankit.k.nautiyal@intel.com (cherry picked from commit f7abc4af2b19240a145a221461dfe756cc01d74a) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 50d34b4fdf82..6ef2a0043cda 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -5303,7 +5303,7 @@ int intel_dp_as_sdp_unpack(struct drm_dp_as_sdp *as_sdp, as_sdp->length = sdp->sdp_header.HB3 & DP_ADAPTIVE_SYNC_SDP_LENGTH; as_sdp->mode = sdp->db[0] & DP_ADAPTIVE_SYNC_SDP_OPERATION_MODE; as_sdp->vtotal = (sdp->db[2] << 8) | sdp->db[1]; - as_sdp->target_rr = (u64)sdp->db[3] | ((u64)sdp->db[4] & 0x3); + as_sdp->target_rr = ((sdp->db[4] & 0x3) << 8) | sdp->db[3]; as_sdp->target_rr_divider = sdp->db[4] & 0x20 ? true : false; return 0; -- cgit v1.2.3 From fbceb39b536e40c2f7cc47ab42037bb7c2b7ced9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jouni=20H=C3=B6gander?= Date: Fri, 15 May 2026 12:57:53 +0300 Subject: drm/i915/psr: Add defininitions for INTEL_WA_REGISTER_CAPS DPCD register MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit EDP specification says: "If either VSC SDP is unable to be transmitted 100 ns before the SU region, the Source device may optionally transmit the VSC SDP during the prior video scan line’s HBlank period There is a Intel specific drm dp register currently containing bits related how TCON can support PSR2 with SDP on prior line." Unfortunately many panels are having problems in implementing this. So there is a custom Intel specific DPCD register (INTEL_WA_REGISTER_CAPS) to figure out if this is properly implemented on a panel or if panel doesn't require that 100 ns delay before the SU region. Here are the definitions in this custom DPCD address: 0 = Panel doesn't support SDP on prior line 1 = Panel supports SDP on prior line 2 = Panel doesn't have 100ns requirement 3 = Reserved Add definitions for this new register and it's values into new header intel_dpcd.h. v2: add INTEL_DPCD_ prefix to definitions Bspec: 74741 Signed-off-by: Jouni Högander Reviewed-by: Suraj Kandpal Link: https://patch.msgid.link/20260515095756.2799483-2-jouni.hogander@intel.com (cherry picked from commit 1da1c9294825f08f622c473480d185680c2a3b75) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_dpcd.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) create mode 100644 drivers/gpu/drm/i915/display/intel_dpcd.h diff --git a/drivers/gpu/drm/i915/display/intel_dpcd.h b/drivers/gpu/drm/i915/display/intel_dpcd.h new file mode 100644 index 000000000000..4aea5326f2ed --- /dev/null +++ b/drivers/gpu/drm/i915/display/intel_dpcd.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: MIT */ +/* + * Copyright © 2026 Intel Corporation + */ + +#ifndef __INTEL_DPCD_H__ +#define __INTEL_DPCD_H__ + +#define INTEL_DPCD_INTEL_WA_REGISTER_CAPS 0x3f0 +# define INTEL_DPCD_INTEL_WA_REGISTER_CAPS_PSR2_EARLYSCANLINE_SDP_SUPPORT_MASK REG_GENMASK(1, 0) +# define INTEL_DPCD_INTEL_WA_REGISTER_CAPS_FALL_BACK_TO_PSR1 0 +# define INTEL_DPCD_INTEL_WA_REGISTER_CAPS_PSR2_WITH_EARLY_SCANLINE 1 +# define INTEL_DPCD_INTEL_WA_REGISTER_CAPS_PSR2_WITHOUT_EARLY_SCANLINE 2 + +#endif /* __INTEL_DPCD_H__ */ -- cgit v1.2.3 From f30bece421a4ae34359254e1dc2a187a42b6af9b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jouni=20H=C3=B6gander?= Date: Fri, 15 May 2026 12:57:54 +0300 Subject: drm/i915/psr: Read Intel DPCD workaround register MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Read Intel DPCD workaround register and store it into intel_connector->dp.psr_caps. psr_caps was chosen as currently it contains only PSR workaround for PSR2 SDP on prior scanline implementation. Signed-off-by: Jouni Högander Reviewed-by: Suraj Kandpal Link: https://patch.msgid.link/20260515095756.2799483-3-jouni.hogander@intel.com (cherry picked from commit c48ff24d0f4ab7ad696b2d35ad64ce7e049c668c) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_display_types.h | 1 + drivers/gpu/drm/i915/display/intel_psr.c | 9 ++++++++- 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index f6cd0a062090..9c7c357afb09 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -584,6 +584,7 @@ struct intel_connector { struct { u8 dpcd[EDP_PSR_RECEIVER_CAP_SIZE]; + u8 intel_wa_dpcd; bool support; bool su_support; diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c index 53c10ae76ab5..82eac4048382 100644 --- a/drivers/gpu/drm/i915/display/intel_psr.c +++ b/drivers/gpu/drm/i915/display/intel_psr.c @@ -43,6 +43,7 @@ #include "intel_display_wa.h" #include "intel_dmc.h" #include "intel_dp.h" +#include "intel_dpcd.h" #include "intel_dp_aux.h" #include "intel_dsb.h" #include "intel_frontbuffer.h" @@ -716,8 +717,14 @@ static void _psr_init_dpcd(struct intel_dp *intel_dp, struct intel_connector *co connector->dp.psr_caps.su_support ? "" : "not "); } - if (connector->dp.psr_caps.su_support) + if (connector->dp.psr_caps.su_support) { + ret = drm_dp_dpcd_read_byte(&intel_dp->aux, + INTEL_DPCD_INTEL_WA_REGISTER_CAPS, + &connector->dp.psr_caps.intel_wa_dpcd); + if (ret < 0) + return; _psr_compute_su_granularity(intel_dp, connector); + } } void intel_psr_init_dpcd(struct intel_dp *intel_dp, struct intel_connector *connector) -- cgit v1.2.3 From 4703049f768fc1c1caac754134118bee1a3af189 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jouni=20H=C3=B6gander?= Date: Fri, 15 May 2026 12:57:55 +0300 Subject: drm/i915/psr: Apply Intel DPCD workaround when SDP on prior line used MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is Intel specific workaround DPCD address containing workaround for case where SDP is on prior line. Apply this workaround according to values in the offset. Fixes: 61e887329e33 ("drm/i915/xelpd: Handle PSR2 SDP indication in the prior scanline") Cc: # v5.15+ Signed-off-by: Jouni Högander Reviewed-by: Suraj Kandpal Link: https://patch.msgid.link/20260515095756.2799483-4-jouni.hogander@intel.com (cherry picked from commit c3fe899fbeac86ea4a5ca9dd845b2cbc0da46249) Signed-off-by: Tvrtko Ursulin --- drivers/gpu/drm/i915/display/intel_psr.c | 35 ++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c index 82eac4048382..29904a037575 100644 --- a/drivers/gpu/drm/i915/display/intel_psr.c +++ b/drivers/gpu/drm/i915/display/intel_psr.c @@ -1365,9 +1365,35 @@ static bool psr2_granularity_check(struct intel_crtc_state *crtc_state, return true; } -static bool _compute_psr2_sdp_prior_scanline_indication(struct intel_dp *intel_dp, - struct intel_crtc_state *crtc_state) +static bool apply_scanline_indication_wa(struct intel_crtc_state *crtc_state, + struct intel_connector *connector) { + struct intel_dp *intel_dp = intel_attached_dp(connector); + u8 early_scanline_support = connector->dp.psr_caps.intel_wa_dpcd & + INTEL_DPCD_INTEL_WA_REGISTER_CAPS_PSR2_EARLYSCANLINE_SDP_SUPPORT_MASK; + + if (intel_dp->edp_dpcd[0] >= DP_EDP_15) + return true; + + switch (early_scanline_support) { + case INTEL_DPCD_INTEL_WA_REGISTER_CAPS_FALL_BACK_TO_PSR1: + crtc_state->req_psr2_sdp_prior_scanline = false; + return false; + case INTEL_DPCD_INTEL_WA_REGISTER_CAPS_PSR2_WITH_EARLY_SCANLINE: + return true; + case INTEL_DPCD_INTEL_WA_REGISTER_CAPS_PSR2_WITHOUT_EARLY_SCANLINE: + crtc_state->req_psr2_sdp_prior_scanline = false; + return true; + default: + MISSING_CASE(early_scanline_support); + return false; + } +} + +static bool _compute_psr2_sdp_prior_scanline_indication(struct intel_crtc_state *crtc_state, + struct intel_connector *connector) +{ + struct intel_dp *intel_dp = intel_attached_dp(connector); struct intel_display *display = to_intel_display(intel_dp); const struct drm_display_mode *adjusted_mode = &crtc_state->uapi.adjusted_mode; u32 hblank_total, hblank_ns, req_ns; @@ -1386,7 +1412,8 @@ static bool _compute_psr2_sdp_prior_scanline_indication(struct intel_dp *intel_d return false; crtc_state->req_psr2_sdp_prior_scanline = true; - return true; + + return apply_scanline_indication_wa(crtc_state, connector); } static int intel_psr_entry_setup_frames(struct intel_dp *intel_dp, @@ -1667,7 +1694,7 @@ static bool intel_sel_update_config_valid(struct intel_crtc_state *crtc_state, conn_state)) goto unsupported; - if (!_compute_psr2_sdp_prior_scanline_indication(intel_dp, crtc_state)) { + if (!_compute_psr2_sdp_prior_scanline_indication(crtc_state, connector)) { drm_dbg_kms(display->drm, "Selective update not enabled, SDP indication do not fit in hblank\n"); goto unsupported; -- cgit v1.2.3 From aa3153bd139a6c48667dcd02608d3b2c80bff02c Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Fri, 15 May 2026 22:00:40 +0200 Subject: batman-adv: iv: recover OGM scheduling after forward packet error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When batadv_iv_ogm_schedule_buff() fails to allocate and queue a forward packet for OGM transmission, the work item that drives periodic OGM scheduling is never re-armed. This silently halts transmission of the node's own OGMs on the affected interface — only OGMs from other peers continue to be aggregated and forwarded. Fix this by tracking whether batadv_iv_ogm_queue_add() (and transitively batadv_iv_ogm_aggregate_new()) successfully scheduled a forward packet. When scheduling fails, batadv_iv_ogm_schedule_buff() falls back to queuing a dedicated recovery work item (reschedule_work) that fires after one originator interval and calls batadv_iv_ogm_schedule() again. Cc: stable@kernel.org Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann --- net/batman-adv/bat_iv_ogm.c | 76 +++++++++++++++++++++++++++++++++------------ net/batman-adv/types.h | 3 ++ 2 files changed, 60 insertions(+), 19 deletions(-) diff --git a/net/batman-adv/bat_iv_ogm.c b/net/batman-adv/bat_iv_ogm.c index 7ad26128b5f7..b8b1b997960a 100644 --- a/net/batman-adv/bat_iv_ogm.c +++ b/net/batman-adv/bat_iv_ogm.c @@ -224,6 +224,8 @@ static void batadv_iv_ogm_iface_disable(struct batadv_hard_iface *hard_iface) hard_iface->bat_iv.ogm_buff = NULL; mutex_unlock(&hard_iface->bat_iv.ogm_buff_mutex); + + cancel_delayed_work_sync(&hard_iface->bat_iv.reschedule_work); } static void batadv_iv_ogm_iface_update_mac(struct batadv_hard_iface *hard_iface) @@ -536,8 +538,10 @@ out: * @if_incoming: interface where the packet was received * @if_outgoing: interface for which the retransmission should be considered * @own_packet: true if it is a self-generated ogm + * + * Return: whether forward packet was scheduled */ -static void batadv_iv_ogm_aggregate_new(const unsigned char *packet_buff, +static bool batadv_iv_ogm_aggregate_new(const unsigned char *packet_buff, int packet_len, unsigned long send_time, bool direct_link, struct batadv_hard_iface *if_incoming, @@ -561,13 +565,13 @@ static void batadv_iv_ogm_aggregate_new(const unsigned char *packet_buff, skb = netdev_alloc_skb_ip_align(NULL, skb_size); if (!skb) - return; + return false; forw_packet_aggr = batadv_forw_packet_alloc(if_incoming, if_outgoing, queue_left, bat_priv, skb); if (!forw_packet_aggr) { kfree_skb(skb); - return; + return false; } forw_packet_aggr->skb->priority = TC_PRIO_CONTROL; @@ -590,6 +594,8 @@ static void batadv_iv_ogm_aggregate_new(const unsigned char *packet_buff, batadv_iv_send_outstanding_bat_ogm_packet); batadv_forw_packet_ogmv1_queue(bat_priv, forw_packet_aggr, send_time); + + return true; } /* aggregate a new packet into the existing ogm packet */ @@ -617,8 +623,10 @@ static void batadv_iv_ogm_aggregate(struct batadv_forw_packet *forw_packet_aggr, * @if_outgoing: interface for which the retransmission should be considered * @own_packet: true if it is a self-generated ogm * @send_time: timestamp (jiffies) when the packet is to be sent + * + * Return: whether forward packet was scheduled */ -static void batadv_iv_ogm_queue_add(struct batadv_priv *bat_priv, +static bool batadv_iv_ogm_queue_add(struct batadv_priv *bat_priv, unsigned char *packet_buff, int packet_len, struct batadv_hard_iface *if_incoming, @@ -670,14 +678,16 @@ static void batadv_iv_ogm_queue_add(struct batadv_priv *bat_priv, if (!own_packet && atomic_read(&bat_priv->aggregated_ogms)) send_time += max_aggregation_jiffies; - batadv_iv_ogm_aggregate_new(packet_buff, packet_len, - send_time, direct_link, - if_incoming, if_outgoing, - own_packet); + return batadv_iv_ogm_aggregate_new(packet_buff, packet_len, + send_time, direct_link, + if_incoming, if_outgoing, + own_packet); } else { batadv_iv_ogm_aggregate(forw_packet_aggr, packet_buff, packet_len, direct_link); spin_unlock_bh(&bat_priv->forw_bat_list_lock); + + return true; } } @@ -790,6 +800,8 @@ static void batadv_iv_ogm_schedule_buff(struct batadv_hard_iface *hard_iface) u32 seqno; u16 tvlv_len = 0; unsigned long send_time; + bool reschedule = false; + bool scheduled; int ret; lockdep_assert_held(&hard_iface->bat_iv.ogm_buff_mutex); @@ -818,11 +830,8 @@ static void batadv_iv_ogm_schedule_buff(struct batadv_hard_iface *hard_iface) ogm_buff_len, BATADV_OGM_HLEN); if (ret < 0) { - /* OGMs must be queued even when the buffer allocation for - * TVLVs failed. just fall back to the non-TVLV version - */ - ret = 0; - *ogm_buff_len = BATADV_OGM_HLEN; + reschedule = true; + goto out; } tvlv_len = ret; @@ -844,8 +853,11 @@ static void batadv_iv_ogm_schedule_buff(struct batadv_hard_iface *hard_iface) /* OGMs from secondary interfaces are only scheduled on their * respective interfaces. */ - batadv_iv_ogm_queue_add(bat_priv, *ogm_buff, *ogm_buff_len, - hard_iface, hard_iface, 1, send_time); + scheduled = batadv_iv_ogm_queue_add(bat_priv, *ogm_buff, *ogm_buff_len, + hard_iface, hard_iface, 1, send_time); + if (!scheduled) + reschedule = true; + goto out; } @@ -857,15 +869,28 @@ static void batadv_iv_ogm_schedule_buff(struct batadv_hard_iface *hard_iface) if (!kref_get_unless_zero(&tmp_hard_iface->refcount)) continue; - batadv_iv_ogm_queue_add(bat_priv, *ogm_buff, - *ogm_buff_len, hard_iface, - tmp_hard_iface, 1, send_time); - + scheduled = batadv_iv_ogm_queue_add(bat_priv, *ogm_buff, + *ogm_buff_len, hard_iface, + tmp_hard_iface, 1, send_time); batadv_hardif_put(tmp_hard_iface); + + if (!scheduled && tmp_hard_iface == hard_iface) + reschedule = true; } rcu_read_unlock(); out: + if (reschedule) { + /* there was a failure scheduling the own forward packet. + * as result, the batadv_iv_send_outstanding_bat_ogm_packet() + * work item is no longer scheduled. it is therefore necessary + * to reschedule it manually + */ + queue_delayed_work(batadv_event_workqueue, + &hard_iface->bat_iv.reschedule_work, + msecs_to_jiffies(atomic_read(&bat_priv->orig_interval))); + } + batadv_hardif_put(primary_if); } @@ -880,6 +905,17 @@ static void batadv_iv_ogm_schedule(struct batadv_hard_iface *hard_iface) mutex_unlock(&hard_iface->bat_iv.ogm_buff_mutex); } +static void batadv_iv_ogm_reschedule(struct work_struct *work) +{ + struct delayed_work *delayed_work = to_delayed_work(work); + struct batadv_hard_iface *hard_iface; + + hard_iface = container_of(delayed_work, + struct batadv_hard_iface, + bat_iv.reschedule_work); + batadv_iv_ogm_schedule(hard_iface); +} + /** * batadv_iv_orig_ifinfo_sum() - Get bcast_own sum for originator over interface * @orig_node: originator which reproadcasted the OGMs directly @@ -2272,6 +2308,8 @@ batadv_iv_ogm_neigh_is_sob(struct batadv_neigh_node *neigh1, static void batadv_iv_iface_enabled(struct batadv_hard_iface *hard_iface) { + INIT_DELAYED_WORK(&hard_iface->bat_iv.reschedule_work, batadv_iv_ogm_reschedule); + /* begin scheduling originator messages on that interface */ batadv_iv_ogm_schedule(hard_iface); } diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index fb0e4cb89d79..821ada05d86a 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -83,6 +83,9 @@ struct batadv_hard_iface_bat_iv { /** @ogm_seqno: OGM sequence number - used to identify each OGM */ atomic_t ogm_seqno; + /** @reschedule_work: recover OGM schedule after schedule error */ + struct delayed_work reschedule_work; + /** @ogm_buff_mutex: lock protecting ogm_buff and ogm_buff_len */ struct mutex ogm_buff_mutex; }; -- cgit v1.2.3 From 0459430add32ea41f3e2ef9351610e6d33627a6b Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sun, 10 May 2026 11:43:20 +0200 Subject: batman-adv: bla: fix report_work leak on backbone_gw purge batadv_bla_purge_backbone_gw() removes stale backbone gateway entries, but fails to properly handle their associated report_work: - If report_work is running, the purge must wait for it to finish before freeing the backbone_gw, otherwise the worker may access freed memory (e.g. bat_priv). - If report_work is pending, the purge must cancel it and release the reference held for that pending work item. The previous implementation called hlist_for_each_entry_safe() inside a spin_lock_bh() section, but cancel_work_sync() may sleep and therefore cannot be called from within a spinlock-protected region. Restructure the loop to handle one entry per spinlock critical section: acquire the lock, find the next entry to purge, remove it from the hash list, then release the lock before calling cancel_work_sync() and dropping the hash_entry reference. Repeat until no more entries require purging. Cc: stable@kernel.org Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Reviewed-by: Simon Wunderlich Signed-off-by: Sven Eckelmann --- net/batman-adv/bridge_loop_avoidance.c | 54 ++++++++++++++++++++++------------ 1 file changed, 35 insertions(+), 19 deletions(-) diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index cec11f1251d6..df1dfdf4a1a1 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -1224,6 +1224,7 @@ static void batadv_bla_purge_backbone_gw(struct batadv_priv *bat_priv, int now) struct hlist_head *head; struct batadv_hashtable *hash; spinlock_t *list_lock; /* protects write access to the hash lists */ + bool purged; int i; hash = bat_priv->bla.backbone_hash; @@ -1234,30 +1235,45 @@ static void batadv_bla_purge_backbone_gw(struct batadv_priv *bat_priv, int now) head = &hash->table[i]; list_lock = &hash->list_locks[i]; - spin_lock_bh(list_lock); - hlist_for_each_entry_safe(backbone_gw, node_tmp, - head, hash_entry) { - if (now) - goto purge_now; - if (!batadv_has_timed_out(backbone_gw->lasttime, - BATADV_BLA_BACKBONE_TIMEOUT)) - continue; + do { + purged = false; - batadv_dbg(BATADV_DBG_BLA, backbone_gw->bat_priv, - "%s(): backbone gw %pM timed out\n", - __func__, backbone_gw->orig); + spin_lock_bh(list_lock); + hlist_for_each_entry_safe(backbone_gw, node_tmp, + head, hash_entry) { + if (now) + goto purge_now; + if (!batadv_has_timed_out(backbone_gw->lasttime, + BATADV_BLA_BACKBONE_TIMEOUT)) + continue; + + batadv_dbg(BATADV_DBG_BLA, backbone_gw->bat_priv, + "%s(): backbone gw %pM timed out\n", + __func__, backbone_gw->orig); purge_now: - /* don't wait for the pending request anymore */ - if (atomic_read(&backbone_gw->request_sent)) - atomic_dec(&bat_priv->bla.num_requests); + purged = true; - batadv_bla_del_backbone_claims(backbone_gw); + /* don't wait for the pending request anymore */ + if (atomic_read(&backbone_gw->request_sent)) + atomic_dec(&bat_priv->bla.num_requests); - hlist_del_rcu(&backbone_gw->hash_entry); - batadv_backbone_gw_put(backbone_gw); - } - spin_unlock_bh(list_lock); + batadv_bla_del_backbone_claims(backbone_gw); + + hlist_del_rcu(&backbone_gw->hash_entry); + break; + } + spin_unlock_bh(list_lock); + + if (purged) { + /* reference for pending report_work */ + if (cancel_work_sync(&backbone_gw->report_work)) + batadv_backbone_gw_put(backbone_gw); + + /* reference for hash_entry */ + batadv_backbone_gw_put(backbone_gw); + } + } while (purged); } } -- cgit v1.2.3 From 83ab69bd12b80f6ea169c8bea6977701b53a043d Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Tue, 12 May 2026 09:13:31 +0200 Subject: batman-adv: bla: avoid double decrement of bla.num_requests The bla.num_requests is increased when no request_sent was in progress. And it is decremented in various places (announcement was received, backbone is purged, periodic work). But the check if the request_sent is actually set to a specific state and the atomic_dec/_inc are not safe because they are not atomic (TOCTOU) and multiple such code portions can run concurrently. At the same time, it is necessary to modify request_sent (state) and bla.num_requests atomically. Otherwise batadv_bla_send_request() might set request_sent to 1 and is interrupted. batadv_handle_announce() can then set request_sent back to 0 and decrement num_requests before batadv_bla_send_request() incremented it. The two operations must therefore be locked. And since state (request_sent) and wait_periods are only accessed inside this lock, they can be converted to simpler datatypes. And to avoid that the bla.num_requests is touched by a parallel running context with a valid backbone_gw reference after batadv_bla_purge_backbone_gw() ran, a third state "stopped" is required to correctly signal that a backbone_gw is in the state of being cleaned up. Cc: stable@kernel.org Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Sven Eckelmann --- net/batman-adv/bridge_loop_avoidance.c | 51 +++++++++++++++++++++++----------- net/batman-adv/mesh-interface.c | 1 + net/batman-adv/types.h | 39 ++++++++++++++++++++------ 3 files changed, 67 insertions(+), 24 deletions(-) diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index df1dfdf4a1a1..1bef12e659cb 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -514,8 +514,8 @@ batadv_bla_get_backbone_gw(struct batadv_priv *bat_priv, const u8 *orig, entry->crc = BATADV_BLA_CRC_INIT; entry->bat_priv = bat_priv; spin_lock_init(&entry->crc_lock); - atomic_set(&entry->request_sent, 0); - atomic_set(&entry->wait_periods, 0); + entry->state = BATADV_BLA_BACKBONE_GW_SYNCED; + entry->wait_periods = 0; ether_addr_copy(entry->orig, orig); INIT_WORK(&entry->report_work, batadv_bla_loopdetect_report); kref_init(&entry->refcount); @@ -544,9 +544,13 @@ batadv_bla_get_backbone_gw(struct batadv_priv *bat_priv, const u8 *orig, batadv_bla_send_announce(bat_priv, entry); /* this will be decreased in the worker thread */ - atomic_inc(&entry->request_sent); - atomic_set(&entry->wait_periods, BATADV_BLA_WAIT_PERIODS); - atomic_inc(&bat_priv->bla.num_requests); + spin_lock_bh(&bat_priv->bla.num_requests_lock); + if (entry->state == BATADV_BLA_BACKBONE_GW_SYNCED) { + entry->state = BATADV_BLA_BACKBONE_GW_UNSYNCED; + entry->wait_periods = BATADV_BLA_WAIT_PERIODS; + atomic_inc(&bat_priv->bla.num_requests); + } + spin_unlock_bh(&bat_priv->bla.num_requests_lock); } return entry; @@ -649,10 +653,12 @@ static void batadv_bla_send_request(struct batadv_bla_backbone_gw *backbone_gw) backbone_gw->vid, BATADV_CLAIM_TYPE_REQUEST); /* no local broadcasts should be sent or received, for now. */ - if (!atomic_read(&backbone_gw->request_sent)) { + spin_lock_bh(&backbone_gw->bat_priv->bla.num_requests_lock); + if (backbone_gw->state == BATADV_BLA_BACKBONE_GW_SYNCED) { + backbone_gw->state = BATADV_BLA_BACKBONE_GW_UNSYNCED; atomic_inc(&backbone_gw->bat_priv->bla.num_requests); - atomic_set(&backbone_gw->request_sent, 1); } + spin_unlock_bh(&backbone_gw->bat_priv->bla.num_requests_lock); } /** @@ -873,10 +879,12 @@ static bool batadv_handle_announce(struct batadv_priv *bat_priv, u8 *an_addr, /* if we have sent a request and the crc was OK, * we can allow traffic again. */ - if (atomic_read(&backbone_gw->request_sent)) { + spin_lock_bh(&bat_priv->bla.num_requests_lock); + if (backbone_gw->state == BATADV_BLA_BACKBONE_GW_UNSYNCED) { + backbone_gw->state = BATADV_BLA_BACKBONE_GW_SYNCED; atomic_dec(&backbone_gw->bat_priv->bla.num_requests); - atomic_set(&backbone_gw->request_sent, 0); } + spin_unlock_bh(&bat_priv->bla.num_requests_lock); } batadv_backbone_gw_put(backbone_gw); @@ -1255,9 +1263,13 @@ purge_now: purged = true; /* don't wait for the pending request anymore */ - if (atomic_read(&backbone_gw->request_sent)) + spin_lock_bh(&bat_priv->bla.num_requests_lock); + if (backbone_gw->state == BATADV_BLA_BACKBONE_GW_UNSYNCED) atomic_dec(&bat_priv->bla.num_requests); + backbone_gw->state = BATADV_BLA_BACKBONE_GW_STOPPED; + spin_unlock_bh(&bat_priv->bla.num_requests_lock); + batadv_bla_del_backbone_claims(backbone_gw); hlist_del_rcu(&backbone_gw->hash_entry); @@ -1508,7 +1520,7 @@ static void batadv_bla_periodic_work(struct work_struct *work) batadv_bla_send_loopdetect(bat_priv, backbone_gw); - /* request_sent is only set after creation to avoid + /* state is only set to unsynced after creation to avoid * problems when we are not yet known as backbone gw * in the backbone. * @@ -1517,14 +1529,21 @@ static void batadv_bla_periodic_work(struct work_struct *work) * some grace time. */ - if (atomic_read(&backbone_gw->request_sent) == 0) - continue; + spin_lock_bh(&bat_priv->bla.num_requests_lock); + if (backbone_gw->state != BATADV_BLA_BACKBONE_GW_UNSYNCED) + goto unlock_next; - if (!atomic_dec_and_test(&backbone_gw->wait_periods)) - continue; + if (backbone_gw->wait_periods > 0) + backbone_gw->wait_periods--; + + if (backbone_gw->wait_periods > 0) + goto unlock_next; + backbone_gw->state = BATADV_BLA_BACKBONE_GW_SYNCED; atomic_dec(&backbone_gw->bat_priv->bla.num_requests); - atomic_set(&backbone_gw->request_sent, 0); + +unlock_next: + spin_unlock_bh(&bat_priv->bla.num_requests_lock); } rcu_read_unlock(); } diff --git a/net/batman-adv/mesh-interface.c b/net/batman-adv/mesh-interface.c index 56ca1c1b83f2..e7aa45bc6b7a 100644 --- a/net/batman-adv/mesh-interface.c +++ b/net/batman-adv/mesh-interface.c @@ -787,6 +787,7 @@ static int batadv_meshif_init_late(struct net_device *dev) atomic_set(&bat_priv->tt.ogm_append_cnt, 0); #ifdef CONFIG_BATMAN_ADV_BLA atomic_set(&bat_priv->bla.num_requests, 0); + spin_lock_init(&bat_priv->bla.num_requests_lock); #endif atomic_set(&bat_priv->tp_num, 0); diff --git a/net/batman-adv/types.h b/net/batman-adv/types.h index 821ada05d86a..a01ee46d97f3 100644 --- a/net/batman-adv/types.h +++ b/net/batman-adv/types.h @@ -1026,6 +1026,12 @@ struct batadv_priv_bla { /** @num_requests: number of bla requests in flight */ atomic_t num_requests; + /** + * @num_requests_lock: locks update num_requests + + * batadv_backbone_gw::state + batadv_backbone_gw::wait_periods update + */ + spinlock_t num_requests_lock; + /** * @claim_hash: hash table containing mesh nodes this host has claimed */ @@ -1672,6 +1678,27 @@ struct batadv_priv { #ifdef CONFIG_BATMAN_ADV_BLA +enum batadv_bla_backbone_gw_state { + /** + * @BATADV_BLA_BACKBONE_GW_STOPPED: backbone gw is being removed + * and it must not longer work on requests + */ + BATADV_BLA_BACKBONE_GW_STOPPED, + + /** + * @BATADV_BLA_BACKBONE_GW_UNSYNCED: backbone was detected out + * of sync and a request was send. No traffic is forwarded until the + * situation is resolved + */ + BATADV_BLA_BACKBONE_GW_UNSYNCED, + + /** + * @BATADV_BLA_BACKBONE_GW_SYNCED: backbone is consider to be in + * sync. traffic can be forwarded + */ + BATADV_BLA_BACKBONE_GW_SYNCED, +}; + /** * struct batadv_bla_backbone_gw - batman-adv gateway bridged into the LAN */ @@ -1697,16 +1724,12 @@ struct batadv_bla_backbone_gw { /** * @wait_periods: grace time for bridge forward delays and bla group * forming at bootup phase - no bcast traffic is formwared until it has - * elapsed + * elapsed. Must only be access with num_requests_lock. */ - atomic_t wait_periods; + u8 wait_periods; - /** - * @request_sent: if this bool is set to true we are out of sync with - * this backbone gateway - no bcast traffic is formwared until the - * situation was resolved - */ - atomic_t request_sent; + /** @state: sync state. Must only be access with num_requests_lock. */ + enum batadv_bla_backbone_gw_state state; /** @crc: crc16 checksum over all claims */ u16 crc; -- cgit v1.2.3 From 73d01051e8040c0b1de7fd26b3b8d0c2ffa6895c Mon Sep 17 00:00:00 2001 From: Osama Abdelkader Date: Thu, 30 Apr 2026 21:49:42 +0200 Subject: drm/bridge: chipone-icn6211: use devm_drm_bridge_add in i2c probe Use devm_drm_bridge_add() so the bridge is released if probe fails after registration, and drop drm_bridge_remove() in chipone_i2c_probe. Signed-off-by: Osama Abdelkader Fixes: 8dde6f7452a1 ("drm: bridge: icn6211: Add I2C configuration support") Cc: stable@vger.kernel.org Reviewed-by: Luca Ceresoli Link: https://patch.msgid.link/20260430194944.78119-1-osama.abdelkader@gmail.com Signed-off-by: Luca Ceresoli --- drivers/gpu/drm/bridge/chipone-icn6211.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c index 814713c5bea9..553a1df4688d 100644 --- a/drivers/gpu/drm/bridge/chipone-icn6211.c +++ b/drivers/gpu/drm/bridge/chipone-icn6211.c @@ -758,7 +758,9 @@ static int chipone_i2c_probe(struct i2c_client *client) dev_set_drvdata(dev, icn); i2c_set_clientdata(client, icn); - drm_bridge_add(&icn->bridge); + ret = devm_drm_bridge_add(dev, &icn->bridge); + if (ret) + return ret; return chipone_dsi_host_attach(icn); } -- cgit v1.2.3 From f80d3d98d2ff78d9e2fe5d68b1f45948c4f7bd24 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Tue, 19 May 2026 09:23:49 +0200 Subject: batman-adv: bla: avoid NULL-ptr deref for claim via dropped interface Without rtnl_lock held, a hardif might be retrieved as primary interface of a meshif, but then (while operating on this interface) getting decoupled from the mesh interface. In this case, the meshif still exists but the pointer from the primary hardif to the meshif is set to NULL. The mesh_iface must be checked first to be non-NULL before continuing to send an ARP request using meshif. Cc: stable@kernel.org Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Reported-by: Ido Schimmel Reported-by: syzbot+9fdcc9f05a98a540b816@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9fdcc9f05a98a540b816 Signed-off-by: Sven Eckelmann --- net/batman-adv/bridge_loop_avoidance.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/batman-adv/bridge_loop_avoidance.c b/net/batman-adv/bridge_loop_avoidance.c index 1bef12e659cb..ffe854018bd3 100644 --- a/net/batman-adv/bridge_loop_avoidance.c +++ b/net/batman-adv/bridge_loop_avoidance.c @@ -356,12 +356,14 @@ static void batadv_bla_send_claim(struct batadv_priv *bat_priv, const u8 *mac, sizeof(local_claim_dest)); local_claim_dest.type = claimtype; - mesh_iface = primary_if->mesh_iface; + mesh_iface = READ_ONCE(primary_if->mesh_iface); + if (!mesh_iface) + goto out; skb = arp_create(ARPOP_REPLY, ETH_P_ARP, /* IP DST: 0.0.0.0 */ zeroip, - primary_if->mesh_iface, + mesh_iface, /* IP SRC: 0.0.0.0 */ zeroip, /* Ethernet DST: Broadcast */ -- cgit v1.2.3 From d45d5c819f2cd0b6b5d76a194a537a5f4aeefecb Mon Sep 17 00:00:00 2001 From: Osama Abdelkader Date: Thu, 30 Apr 2026 21:56:59 +0200 Subject: drm/bridge: megachips: remove bridge when irq request fails If devm_request_threaded_irq() fails after drm_bridge_add(), remove the bridge before returning. Keep drm_bridge_add() rather than devm_drm_bridge_add(): registration is tied to the STDP4028 device while ge_b850v3_register() may complete from either I2C probe; devm would not unwind the bridge if the other client's probe fails. Signed-off-by: Osama Abdelkader Fixes: fcfa0ddc18ed ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)") Cc: stable@vger.kernel.org Reviewed-by: Luca Ceresoli Tested-by: Ian Ray Link: https://patch.msgid.link/20260430195700.80317-1-osama.abdelkader@gmail.com Signed-off-by: Luca Ceresoli --- drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c index c9e6505cbd88..2d02cc69f237 100644 --- a/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c +++ b/drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c @@ -251,7 +251,6 @@ static void ge_b850v3_lvds_remove(void) goto out; drm_bridge_remove(&ge_b850v3_lvds_ptr->bridge); - ge_b850v3_lvds_ptr = NULL; out: mutex_unlock(&ge_b850v3_lvds_dev_mutex); @@ -261,6 +260,7 @@ static int ge_b850v3_register(void) { struct i2c_client *stdp4028_i2c = ge_b850v3_lvds_ptr->stdp4028_i2c; struct device *dev = &stdp4028_i2c->dev; + int ret; /* drm bridge initialization */ ge_b850v3_lvds_ptr->bridge.ops = DRM_BRIDGE_OP_DETECT | @@ -277,11 +277,15 @@ static int ge_b850v3_register(void) if (!stdp4028_i2c->irq) return 0; - return devm_request_threaded_irq(&stdp4028_i2c->dev, - stdp4028_i2c->irq, NULL, - ge_b850v3_lvds_irq_handler, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, - "ge-b850v3-lvds-dp", ge_b850v3_lvds_ptr); + ret = devm_request_threaded_irq(&stdp4028_i2c->dev, + stdp4028_i2c->irq, NULL, + ge_b850v3_lvds_irq_handler, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + "ge-b850v3-lvds-dp", ge_b850v3_lvds_ptr); + if (ret) + drm_bridge_remove(&ge_b850v3_lvds_ptr->bridge); + + return ret; } static int stdp4028_ge_b850v3_fw_probe(struct i2c_client *stdp4028_i2c) -- cgit v1.2.3 From ea17fc4d7dc2ba6459b1a318962960520201baf1 Mon Sep 17 00:00:00 2001 From: Xiangxu Yin Date: Fri, 27 Feb 2026 20:15:01 +0800 Subject: phy: qcom: qmp-usbc: Fix out-of-bounds array access in dp swing config swing_tbl and pre_emphasis_tbl are 4x4 arrays (valid indices 0-3), but the boundary check uses "> 4" instead of ">= 4", allowing index 4 to cause an out-of-bounds access. Reported-by: Dan Carpenter Fixes: 81791c45c8e0 ("phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config and DP mode support") Signed-off-by: Xiangxu Yin Reviewed-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Link: https://patch.msgid.link/20260227-master-v1-1-8d91b9407fdb@oss.qualcomm.com Signed-off-by: Vinod Koul --- drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c index c342479a3798..dff27d30fc99 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c @@ -794,7 +794,7 @@ static int qmp_v2_configure_dp_swing(struct qmp_usbc *qmp) p_level = max(p_level, dp_opts->pre[i]); } - if (v_level > 4 || p_level > 4) { + if (v_level >= 4 || p_level >= 4) { dev_err(qmp->dev, "Invalid v(%d) | p(%d) level)\n", v_level, p_level); return -EINVAL; -- cgit v1.2.3 From 49f8fcde68898f5033082e8155cd344dd54ef232 Mon Sep 17 00:00:00 2001 From: Hasan Basbunar Date: Tue, 5 May 2026 18:11:02 +0200 Subject: modpost: prevent stack buffer overflow in do_input_entry() and do_dmi_entry() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Several functions in scripts/mod/file2alias.c build the module alias string by repeatedly appending into a fixed-size on-stack buffer: char alias[256] = {}; ... sprintf(alias + strlen(alias), "%X,*", i); This pattern is unbounded and silently corrupts the stack when the formatted output exceeds the destination size. Two functions in this file are realistically reachable with input that overflows their buffer: 1. do_input_entry() appends across nine bitmap classes (evbit/keybit/relbit/absbit/mscbit/ledbit/sndbit/ffbit/swbit). The keybit case alone scans bits from INPUT_DEVICE_ID_KEY_MIN_INTERESTING (0x71) to INPUT_DEVICE_ID_KEY_MAX (0x2ff), 655 iterations; if a MODULE_DEVICE_TABLE(input, ...) populates keybit[] densely, the emission reaches ~3132 bytes — overflowing the 256-byte buffer by about 12x. include/linux/mod_devicetable.h declares storage for the full bit range ("keybit[INPUT_DEVICE_ID_KEY_MAX / BITS_PER_LONG + 1]"), so the worst case is reachable per the ABI. 2. do_dmi_entry() emits one ":**" segment per matched DMI field, up to 4 matches per dmi_system_id. Each substr is sized as char[79] in struct dmi_strmatch (mod_devicetable.h:584), and dmi_ascii_filter() copies it verbatim into the alias buffer without bounds. Worst case: 4 × (1 + 3 + 1 + 79 + 1) = 336 bytes into alias[256], an 80-byte overflow. No driver in the current tree triggers either case — every in-tree INPUT_DEVICE_ID_MATCH_KEYBIT user populates keybit[] very sparsely (1-3 bits), and no in-tree dmi_system_id has four maximally-long matches. The concern is defense-in-depth: both unbounded sprintf chains are silent stack-corruption primitives in a host build tool, and the buffer sizes have not been revisited since the corresponding code was first introduced. The other do_*_entry() handlers in this file (do_usb_entry, do_cpu_entry, do_typec_entry, ...) were audited and are bounded by their input field sizes (uint16 IDs, fixed-length keys); their alias buffers do not need this treatment. Reproduced under AddressSanitizer with a stand-alone harness mirroring do_input on a fully-populated keybit: ==18319==ERROR: AddressSanitizer: stack-buffer-overflow WRITE of size 2 at offset 288 in frame [32, 288) 'alias' #6 do_input poc.c:44 Stack-canary build: Abort trap: 6 (strlen(alias)=3134, cap was 256-1) Add a small alias_append() helper around vsnprintf with a remaining- space check and call fatal() on overflow, matching the modpost style for unrecoverable build conditions. do_input() takes the buffer size as a new parameter; do_input_entry() and do_dmi_entry() pass sizeof(alias) at every call site. dmi_ascii_filter() takes the remaining buffer size as well and aborts on truncation. This bounds every write into the on-stack buffers and turns the latent overflow into a clean build error if it is ever reached. Fixes: 1d8f430c15b3 ("[PATCH] Input: add modalias support") Reviewed-by: Randy Dunlap Tested-by: Randy Dunlap Signed-off-by: Hasan Basbunar Link: https://patch.msgid.link/20260505161102.44087-1-basbunarhasan@gmail.com Signed-off-by: Nicolas Schier --- scripts/mod/file2alias.c | 79 ++++++++++++++++++++++++++++++++---------------- 1 file changed, 53 insertions(+), 26 deletions(-) diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 4e99393a35f1..2ad87a74bb03 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -651,7 +651,26 @@ static void do_vio_entry(struct module *mod, void *symval) module_alias_printf(mod, true, "%s", alias); } -static void do_input(char *alias, +static void __attribute__((format(printf, 3, 4))) +alias_append(char *alias, size_t size, const char *fmt, ...) +{ + size_t len = strlen(alias); + va_list args; + int n; + + if (len >= size) + fatal("alias buffer (%zu) overflow before append\n", size); + + va_start(args, fmt); + n = vsnprintf(alias + len, size - len, fmt, args); + va_end(args); + + if (n < 0 || (size_t)n >= size - len) + fatal("alias buffer (%zu) overflow on append (need %d, have %zu)\n", + size, n, size - len); +} + +static void do_input(char *alias, size_t size, kernel_ulong_t *arr, unsigned int min, unsigned int max) { unsigned int i; @@ -659,13 +678,14 @@ static void do_input(char *alias, for (i = min; i <= max; i++) if (get_unaligned_native(arr + i / BITS_PER_LONG) & (1ULL << (i % BITS_PER_LONG))) - sprintf(alias + strlen(alias), "%X,*", i); + alias_append(alias, size, "%X,*", i); } /* input:b0v0p0e0-eXkXrXaXmXlXsXfXwX where X is comma-separated %02X. */ static void do_input_entry(struct module *mod, void *symval) { char alias[256] = {}; + const size_t sizeof_alias = sizeof(alias); DEF_FIELD(symval, input_device_id, flags); DEF_FIELD(symval, input_device_id, bustype); @@ -687,35 +707,35 @@ static void do_input_entry(struct module *mod, void *symval) ADD(alias, "p", flags & INPUT_DEVICE_ID_MATCH_PRODUCT, product); ADD(alias, "e", flags & INPUT_DEVICE_ID_MATCH_VERSION, version); - sprintf(alias + strlen(alias), "-e*"); + alias_append(alias, sizeof_alias, "-e*"); if (flags & INPUT_DEVICE_ID_MATCH_EVBIT) - do_input(alias, *evbit, 0, INPUT_DEVICE_ID_EV_MAX); - sprintf(alias + strlen(alias), "k*"); + do_input(alias, sizeof_alias, *evbit, 0, INPUT_DEVICE_ID_EV_MAX); + alias_append(alias, sizeof_alias, "k*"); if (flags & INPUT_DEVICE_ID_MATCH_KEYBIT) - do_input(alias, *keybit, + do_input(alias, sizeof_alias, *keybit, INPUT_DEVICE_ID_KEY_MIN_INTERESTING, INPUT_DEVICE_ID_KEY_MAX); - sprintf(alias + strlen(alias), "r*"); + alias_append(alias, sizeof_alias, "r*"); if (flags & INPUT_DEVICE_ID_MATCH_RELBIT) - do_input(alias, *relbit, 0, INPUT_DEVICE_ID_REL_MAX); - sprintf(alias + strlen(alias), "a*"); + do_input(alias, sizeof_alias, *relbit, 0, INPUT_DEVICE_ID_REL_MAX); + alias_append(alias, sizeof_alias, "a*"); if (flags & INPUT_DEVICE_ID_MATCH_ABSBIT) - do_input(alias, *absbit, 0, INPUT_DEVICE_ID_ABS_MAX); - sprintf(alias + strlen(alias), "m*"); + do_input(alias, sizeof_alias, *absbit, 0, INPUT_DEVICE_ID_ABS_MAX); + alias_append(alias, sizeof_alias, "m*"); if (flags & INPUT_DEVICE_ID_MATCH_MSCIT) - do_input(alias, *mscbit, 0, INPUT_DEVICE_ID_MSC_MAX); - sprintf(alias + strlen(alias), "l*"); + do_input(alias, sizeof_alias, *mscbit, 0, INPUT_DEVICE_ID_MSC_MAX); + alias_append(alias, sizeof_alias, "l*"); if (flags & INPUT_DEVICE_ID_MATCH_LEDBIT) - do_input(alias, *ledbit, 0, INPUT_DEVICE_ID_LED_MAX); - sprintf(alias + strlen(alias), "s*"); + do_input(alias, sizeof_alias, *ledbit, 0, INPUT_DEVICE_ID_LED_MAX); + alias_append(alias, sizeof_alias, "s*"); if (flags & INPUT_DEVICE_ID_MATCH_SNDBIT) - do_input(alias, *sndbit, 0, INPUT_DEVICE_ID_SND_MAX); - sprintf(alias + strlen(alias), "f*"); + do_input(alias, sizeof_alias, *sndbit, 0, INPUT_DEVICE_ID_SND_MAX); + alias_append(alias, sizeof_alias, "f*"); if (flags & INPUT_DEVICE_ID_MATCH_FFBIT) - do_input(alias, *ffbit, 0, INPUT_DEVICE_ID_FF_MAX); - sprintf(alias + strlen(alias), "w*"); + do_input(alias, sizeof_alias, *ffbit, 0, INPUT_DEVICE_ID_FF_MAX); + alias_append(alias, sizeof_alias, "w*"); if (flags & INPUT_DEVICE_ID_MATCH_SWBIT) - do_input(alias, *swbit, 0, INPUT_DEVICE_ID_SW_MAX); + do_input(alias, sizeof_alias, *swbit, 0, INPUT_DEVICE_ID_SW_MAX); module_alias_printf(mod, false, "input:%s", alias); } @@ -895,12 +915,16 @@ static const struct dmifield { { NULL, DMI_NONE } }; -static void dmi_ascii_filter(char *d, const char *s) +static void dmi_ascii_filter(char *d, size_t avail, const char *s) { /* Filter out characters we don't want to see in the modalias string */ for (; *s; s++) - if (*s > ' ' && *s < 127 && *s != ':') + if (*s > ' ' && *s < 127 && *s != ':') { + if (avail <= 1) + fatal("%s: alias buffer overflow\n", __func__); *(d++) = *s; + avail--; + } *d = 0; } @@ -909,6 +933,8 @@ static void dmi_ascii_filter(char *d, const char *s) static void do_dmi_entry(struct module *mod, void *symval) { char alias[256] = {}; + const size_t sizeof_alias = sizeof(alias); + size_t len; int i, j; DEF_FIELD_ADDR(symval, dmi_system_id, matches); @@ -916,11 +942,12 @@ static void do_dmi_entry(struct module *mod, void *symval) for (j = 0; j < 4; j++) { if ((*matches)[j].slot && (*matches)[j].slot == dmi_fields[i].field) { - sprintf(alias + strlen(alias), ":%s*", - dmi_fields[i].prefix); - dmi_ascii_filter(alias + strlen(alias), + alias_append(alias, sizeof_alias, ":%s*", + dmi_fields[i].prefix); + len = strlen(alias); + dmi_ascii_filter(alias + len, sizeof_alias - len, (*matches)[j].substr); - strcat(alias, "*"); + alias_append(alias, sizeof_alias, "*"); } } } -- cgit v1.2.3 From 202550713128da20d9381d6d2dc0f6b73839f434 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Viktor=20J=C3=A4gersk=C3=BCpper?= Date: Fri, 15 May 2026 23:58:45 +0200 Subject: kbuild: pacman-pkg: make "rc" releases adhere to pacman versioning scheme MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The package versioning scheme does not enable smooth upgrades from "rc" releases to the corresponding stable releases (e.g. 7.0.0-rc7 -> 7.0.0) because pacman considers that a downgrade due to the underscore in pkgver (e.g. 7.0.0_rc7), see e.g. vercmp(8) for an explanation of the package version comparison used by pacman. Package versions which are derived from said releases (e.g. built from git revisions) are similarly affected. Fix this by modifying pkgver in order to remove the hyphen from kernel versions containing "-rcN", where N is a non-negative integer. Acked-by: Thomas Weißschuh Signed-off-by: Viktor Jägersküpper Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor Link: https://patch.msgid.link/20260515215913.92481-1-viktor_jaegerskuepper@freenet.de Fixes: c8578539deba ("kbuild: add script and target to generate pacman package") Signed-off-by: Nicolas Schier --- scripts/package/PKGBUILD | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/package/PKGBUILD b/scripts/package/PKGBUILD index 452374d63c24..1213c8e04671 100644 --- a/scripts/package/PKGBUILD +++ b/scripts/package/PKGBUILD @@ -10,7 +10,7 @@ for pkg in $_extrapackages; do pkgname+=("${pkgbase}-${pkg}") done -pkgver="${KERNELRELEASE//-/_}" +pkgver="$(echo "${KERNELRELEASE}" | sed 's/-\(rc[0-9]\+\)/\1/;s/-/_/g')" # The PKGBUILD is evaluated multiple times. # Running scripts/build-version from here would introduce inconsistencies. pkgrel="${KBUILD_REVISION}" -- cgit v1.2.3 From e824e40d0e841fab66ab7897d6c7b14dc81c66a7 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Thu, 14 May 2026 15:04:21 +0100 Subject: net: dsa: mt7530: fix FDB entries not aging out with short timeout The DSA forwarding selftests bridge_vlan_aware.sh and bridge_vlan_unaware.sh configure the bridge with ageing_time set to LOW_AGEING_TIME (1000 centiseconds, i.e. 10 seconds) and then run learning_test() in lib.sh, which expects a learned FDB entry to be removed after ageing_time + 10 seconds. On MT7530/MT7531 the entry persisted past the deadline and the "Found FDB record when should not" assertion failed. With msecs=10000, the algorithm in mt7530_set_ageing_time() finds AGE_CNT=0 and AGE_UNIT=9 as the first exact match (starting the search from tmp_age_count=0). The per-entry aging counter is initialized to AGE_CNT when a MAC address is learned, so with AGE_CNT=0 new entries start with a counter value of 0, which the hardware treats as "already aged" and never removes, effectively disabling aging. Fix this by starting the search from tmp_age_count=1 to ensure entries always have a non-zero initial aging counter. For a 10-second ageing time this yields AGE_CNT=1 and AGE_UNIT=4 instead: the timer ticks every 5 seconds and entries are removed after 2 ticks. Starting the search at AGE_CNT=1 raises the minimum representable ageing time from 1 to 2 seconds. Without bounds, a stale ageing_time of 1 second would now make the loop fall through without setting age_count and age_unit, leaving them uninitialized when written to the MT7530_AAC hardware register. Set ds->ageing_time_min and ds->ageing_time_max so the DSA core validates the range before the callback is invoked, and drop the now-redundant range check from mt7530_set_ageing_time(). Fixes: ea6d5c924e39 ("net: dsa: mt7530: support setting ageing time") Signed-off-by: Daniel Golle Link: https://patch.msgid.link/7788ded12dc07b1bce329ec35fa70f4b45f3f9b7.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni --- drivers/net/dsa/mt7530.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 44d670904ad8..cd311dfd3600 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1023,12 +1023,16 @@ mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) unsigned int age_count; unsigned int age_unit; - /* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds */ - if (secs < 1 || secs > (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1)) - return -ERANGE; - - /* iterate through all possible age_count to find the closest pair */ - for (tmp_age_count = 0; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) { + /* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds. + * The DSA core has already validated the range using + * ds->ageing_time_min and ds->ageing_time_max. + * + * Iterate through all possible age_count values to find the closest + * pair. Start from 1 because the per-entry aging counter is + * initialized to AGE_CNT and a value of 0 means the entry will + * never be aged out. + */ + for (tmp_age_count = 1; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) { unsigned int tmp_age_unit = secs / (tmp_age_count + 1) - 1; if (tmp_age_unit <= AGE_UNIT_MAX) { @@ -2428,6 +2432,8 @@ mt7530_setup(struct dsa_switch *ds) ds->assisted_learning_on_cpu_port = true; ds->mtu_enforcement_ingress = true; + ds->ageing_time_min = 2 * 1000; + ds->ageing_time_max = (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1) * 1000; if (priv->id == ID_MT7530) { regulator_set_voltage(priv->core_pwr, 1000000, 1000000); @@ -2617,6 +2623,8 @@ mt7531_setup_common(struct dsa_switch *ds) ds->assisted_learning_on_cpu_port = true; ds->mtu_enforcement_ingress = true; + ds->ageing_time_min = 2 * 1000; + ds->ageing_time_max = (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1) * 1000; mt753x_trap_frames(priv); -- cgit v1.2.3 From 3ac85bcfd404b588298c95c6fba8aad4ad334f57 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Thu, 14 May 2026 15:04:35 +0100 Subject: net: dsa: mt7530: preserve VLAN tags on trapped link-local frames The BPC, RGAC1 and RGAC2 registers control the handling of link-local frames with reserved MAC DAs (01:80:C2:00:00:0x). These frames are correctly trapped to the CPU port, but the egress VLAN tag attribute was set to MT7530_VLAN_EG_UNTAGGED which causes the switch to strip any VLAN tags from trapped frames before they reach the CPU. This causes VLAN-tagged link-local frames (STP BPDUs, LLDP, PTP Peer Delay Requests) to arrive at the CPU without their VLAN tag, so they are delivered to the base network interface instead of the VLAN sub-interface. The DSA local_termination selftest confirms this: all link-local protocol tests on VLAN upper interfaces fail. Set the EG_TAG attribute to MT7530_VLAN_EG_DISABLED (system default) so that the switch does not modify VLAN tags in trapped frames. This way VLAN-tagged frames retain their original tag and are delivered to the correct VLAN sub-interface, matching the behavior of non-trapped frames which pass through without VLAN tag modification. Fixes: 69ddba9d170b ("net: dsa: mt7530: fix handling of all link-local frames") Signed-off-by: Daniel Golle Acked-by: Chester A. Unal Link: https://patch.msgid.link/891e0cd34db2a5fe20ceb73283a81fb5f71427ca.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni --- drivers/net/dsa/mt7530.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index cd311dfd3600..4f657ef6aa65 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1300,37 +1300,40 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) static void mt753x_trap_frames(struct mt7530_priv *priv) { - /* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them - * VLAN-untagged. + /* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress + * them with the EG_TAG attribute set to disabled (system default) + * so that any VLAN tags in the frame are not modified by the + * switch egress VLAN tag processing. This preserves VLAN tags + * for reception on VLAN sub-interfaces. */ mt7530_rmw(priv, MT753X_BPC, PAE_BPDU_FR | PAE_EG_TAG_MASK | PAE_PORT_FW_MASK | BPDU_EG_TAG_MASK | BPDU_PORT_FW_MASK, - PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + PAE_BPDU_FR | PAE_EG_TAG(MT7530_VLAN_EG_DISABLED) | PAE_PORT_FW(TO_CPU_FW_CPU_ONLY) | - BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + BPDU_EG_TAG(MT7530_VLAN_EG_DISABLED) | TO_CPU_FW_CPU_ONLY); - /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress - * them VLAN-untagged. + /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and + * egress them with EG_TAG disabled. */ mt7530_rmw(priv, MT753X_RGAC1, R02_BPDU_FR | R02_EG_TAG_MASK | R02_PORT_FW_MASK | R01_BPDU_FR | R01_EG_TAG_MASK | R01_PORT_FW_MASK, - R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + R02_BPDU_FR | R02_EG_TAG(MT7530_VLAN_EG_DISABLED) | R02_PORT_FW(TO_CPU_FW_CPU_ONLY) | R01_BPDU_FR | - R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + R01_EG_TAG(MT7530_VLAN_EG_DISABLED) | TO_CPU_FW_CPU_ONLY); - /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress - * them VLAN-untagged. + /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and + * egress them with EG_TAG disabled. */ mt7530_rmw(priv, MT753X_RGAC2, R0E_BPDU_FR | R0E_EG_TAG_MASK | R0E_PORT_FW_MASK | R03_BPDU_FR | R03_EG_TAG_MASK | R03_PORT_FW_MASK, - R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + R0E_BPDU_FR | R0E_EG_TAG(MT7530_VLAN_EG_DISABLED) | R0E_PORT_FW(TO_CPU_FW_CPU_ONLY) | R03_BPDU_FR | - R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + R03_EG_TAG(MT7530_VLAN_EG_DISABLED) | TO_CPU_FW_CPU_ONLY); } -- cgit v1.2.3 From 2c4c76cacc9d5553f4c3342eb332d7123a4c3f14 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Thu, 14 May 2026 15:04:50 +0100 Subject: net: dsa: mt7530: fix CPU port VLAN not being reset to unaware After a VLAN-aware bridge is destroyed, creating any VLAN-unaware bridge loses all connectivity. The VID 0 VLAN table entry used by VLAN-unaware ports in FALLBACK mode gets corrupted during VLAN-aware operation: mt7530_hw_vlan_add() overwrites its EG_CON flag with VTAG_EN and bridge teardown removes ports from its PORT_MEM. The cleanup code that should restore it never runs because the current port's dp->vlan_filtering flag is still true when checked (DSA updates it only after the driver callback returns). Even when restored, the deferred VLAN deletion events from the switchdev workqueue can corrupt VID 0 again after the restoration. Skip the current port in the all_user_ports_removed check, call mt7530_setup_vlan0() to restore the VID 0 entry, and protect VID 0 from being modified by bridge VLAN operations in port_vlan_add and port_vlan_del since it is managed exclusively by mt7530_setup_vlan0(). Remove the CPU port PCR and PVC register writes which were clobbering PORT_VLAN mode and VLAN_ATTR with wrong values. Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: Daniel Golle Link: https://patch.msgid.link/da8bdaf08b2427a9057e6cb33e26d41f8a8d5000.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni --- drivers/net/dsa/mt7530.c | 111 ++++++++++++++++++++++++++--------------------- 1 file changed, 62 insertions(+), 49 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 4f657ef6aa65..752ba92b0851 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1623,6 +1623,49 @@ mt7530_port_bridge_join(struct dsa_switch *ds, int port, return 0; } +static int +mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid) +{ + struct mt7530_dummy_poll p; + u32 val; + int ret; + + val = VTCR_BUSY | VTCR_FUNC(cmd) | vid; + mt7530_write(priv, MT7530_VTCR, val); + + INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR); + ret = readx_poll_timeout(_mt7530_read, &p, val, + !(val & VTCR_BUSY), 20, 20000); + if (ret < 0) { + dev_err(priv->dev, "poll timeout\n"); + return ret; + } + + val = mt7530_read(priv, MT7530_VTCR); + if (val & VTCR_INVALID) { + dev_err(priv->dev, "read VTCR invalid\n"); + return -EINVAL; + } + + return 0; +} + +static int +mt7530_setup_vlan0(struct mt7530_priv *priv) +{ + u32 val; + + /* Validate the entry with independent learning, keep the original + * ingress tag attribute. + */ + val = IVL_MAC | EG_CON | PORT_MEM(MT7530_ALL_MEMBERS) | FID(FID_BRIDGED) | + VLAN_VALID; + mt7530_write(priv, MT7530_VAWD1, val); + mt7530_write(priv, MT7530_VAWD2, 0); + + return mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, 0); +} + static void mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port) { @@ -1648,6 +1691,8 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port) G0_PORT_VID_DEF); for (i = 0; i < priv->ds->num_ports; i++) { + if (i == port) + continue; if (dsa_is_user_port(ds, i) && dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) { all_user_ports_removed = false; @@ -1659,13 +1704,9 @@ mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port) * the CPU port get out of VLAN filtering mode. */ if (all_user_ports_removed) { - struct dsa_port *dp = dsa_to_port(ds, port); - struct dsa_port *cpu_dp = dp->cpu_dp; - - mt7530_write(priv, MT7530_PCR_P(cpu_dp->index), - PCR_MATRIX(dsa_user_ports(priv->ds))); - mt7530_write(priv, MT7530_PVC_P(cpu_dp->index), PORT_SPEC_TAG - | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); + mutex_lock(&priv->reg_mutex); + mt7530_setup_vlan0(priv); + mutex_unlock(&priv->reg_mutex); } } @@ -1853,33 +1894,6 @@ mt7530_port_mdb_del(struct dsa_switch *ds, int port, return ret; } -static int -mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid) -{ - struct mt7530_dummy_poll p; - u32 val; - int ret; - - val = VTCR_BUSY | VTCR_FUNC(cmd) | vid; - mt7530_write(priv, MT7530_VTCR, val); - - INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR); - ret = readx_poll_timeout(_mt7530_read, &p, val, - !(val & VTCR_BUSY), 20, 20000); - if (ret < 0) { - dev_err(priv->dev, "poll timeout\n"); - return ret; - } - - val = mt7530_read(priv, MT7530_VTCR); - if (val & VTCR_INVALID) { - dev_err(priv->dev, "read VTCR invalid\n"); - return -EINVAL; - } - - return 0; -} - static int mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, struct netlink_ext_ack *extack) @@ -1984,21 +1998,6 @@ mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid, mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, vid); } -static int -mt7530_setup_vlan0(struct mt7530_priv *priv) -{ - u32 val; - - /* Validate the entry with independent learning, keep the original - * ingress tag attribute. - */ - val = IVL_MAC | EG_CON | PORT_MEM(MT7530_ALL_MEMBERS) | FID(FID_BRIDGED) | - VLAN_VALID; - mt7530_write(priv, MT7530_VAWD1, val); - - return mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, 0); -} - static int mt7530_port_vlan_add(struct dsa_switch *ds, int port, const struct switchdev_obj_port_vlan *vlan, @@ -2011,9 +2010,18 @@ mt7530_port_vlan_add(struct dsa_switch *ds, int port, mutex_lock(&priv->reg_mutex); + /* VID 0 is managed exclusively by mt7530_setup_vlan0() for + * VLAN-unaware bridge operation. Don't let the bridge overwrite + * its EG_CON flag with VTAG_EN and corrupt PORT_MEM. + */ + if (vlan->vid == 0) + goto skip_vlan_table; + mt7530_hw_vlan_entry_init(&new_entry, port, untagged); mt7530_hw_vlan_update(priv, vlan->vid, &new_entry, mt7530_hw_vlan_add); +skip_vlan_table: + if (pvid) { priv->ports[port].pvid = vlan->vid; @@ -2053,10 +2061,15 @@ mt7530_port_vlan_del(struct dsa_switch *ds, int port, mutex_lock(&priv->reg_mutex); + /* VID 0 is managed exclusively by mt7530_setup_vlan0(). */ + if (vlan->vid == 0) + goto skip_vlan_table; + mt7530_hw_vlan_entry_init(&target_entry, port, 0); mt7530_hw_vlan_update(priv, vlan->vid, &target_entry, mt7530_hw_vlan_del); +skip_vlan_table: /* PVID is being restored to the default whenever the PVID port * is being removed from the VLAN. */ -- cgit v1.2.3 From 4cb3cd670b2a29e52dd3cfd6463e44121674c9b8 Mon Sep 17 00:00:00 2001 From: Edward Parker Date: Thu, 14 May 2026 15:05:12 +0100 Subject: net: dsa: mt7530: untag VLAN-aware bridge PVID With bridge VLAN filtering enabled on a port configured as untagged member of the bridge PVID, ingress untagged frames do not reach the corresponding bridge VLAN upper interface (br-lan.). ARP and similar traffic is visible on the physical port but not delivered to the VLAN sub-interface. The MT7530/MT7531 forwards frames to the CPU port with the user port's PVID tag applied even when the frame ingressed untagged on the wire, because the CPU port is set to MT7530_VLAN_EG_CONSISTENT and is a tagged member of the VLAN entry created for the bridge VLAN. The DSA core then sees a hwaccel-tagged frame whose VID matches the port's PVID, which the bridge does not treat as the untagged-on-the-wire frame that the user expects. Set ds->untag_vlan_aware_bridge_pvid in the mt7530 and mt7531 setup paths so the DSA core strips that hwaccel tag in software when the parsed VID matches the bridge port's PVID, restoring the on-the-wire frame as the bridge expects to see it. Link: https://github.com/openwrt/openwrt/issues/18576 Fixes: 83163f7dca56 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: Edward Parker [daniel@makrotopia.org: improve commit message] Signed-off-by: Daniel Golle Link: https://patch.msgid.link/85d25ea1b26d3c907f815649f2e0bde6560282a3.1778766629.git.daniel@makrotopia.org Signed-off-by: Paolo Abeni --- drivers/net/dsa/mt7530.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 752ba92b0851..3c2a3029b10c 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2447,6 +2447,7 @@ mt7530_setup(struct dsa_switch *ds) } ds->assisted_learning_on_cpu_port = true; + ds->untag_vlan_aware_bridge_pvid = true; ds->mtu_enforcement_ingress = true; ds->ageing_time_min = 2 * 1000; ds->ageing_time_max = (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1) * 1000; @@ -2638,6 +2639,7 @@ mt7531_setup_common(struct dsa_switch *ds) int ret, i; ds->assisted_learning_on_cpu_port = true; + ds->untag_vlan_aware_bridge_pvid = true; ds->mtu_enforcement_ingress = true; ds->ageing_time_min = 2 * 1000; ds->ageing_time_max = (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1) * 1000; -- cgit v1.2.3 From 023453cb7eb0f53c5dc36babed8e706c1b0b0187 Mon Sep 17 00:00:00 2001 From: Wenwen Wang Date: Sat, 5 May 2018 07:57:10 -0500 Subject: i2c: smbus: fix a potential uninitialization bug In i2c_smbus_xfer_emulated(), there are two buffers: msgbuf0 and msgbuf1, which are used to save a series of messages, as mentioned in the comment. According to the value of the variable 'size', msgbuf0 is initialized to various values. In contrast, msgbuf1 is left uninitialized until the function i2c_transfer() is invoked. However, msgbuf1 is not always initialized on all possible execution paths (implementation) of i2c_transfer(). Thus, it is possible that msgbuf1 may still be uninitialized even after the invocation of the function i2c_transfer(), especially when the return value of i2c_transfer() is not checked properly. In the following execution, the uninitialized msgbuf1 will be used, such as for security checks. Since uninitialized values can be random and arbitrary, this will cause undefined behaviors or even check bypass. For example, it is expected that if the value of 'size' is I2C_SMBUS_BLOCK_PROC_CALL, the value of data->block[0] should not be larger than I2C_SMBUS_BLOCK_MAX. This patch initializes the first byte of msgbuf1 with 0 to avoid such undefined behaviors or security issues. Signed-off-by: Wenwen Wang [wsa: reworded commit message a little] Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core-smbus.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c index ad6acb5ebadc..fa63bee0b345 100644 --- a/drivers/i2c/i2c-core-smbus.c +++ b/drivers/i2c/i2c-core-smbus.c @@ -353,6 +353,7 @@ static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr, && size != I2C_SMBUS_I2C_BLOCK_DATA); msgbuf0[0] = command; + msgbuf1[0] = 0; switch (size) { case I2C_SMBUS_QUICK: msg[0].len = 0; -- cgit v1.2.3 From 35f0f0a2536a4d604b4dbad92c85c4a8fdebb870 Mon Sep 17 00:00:00 2001 From: Erni Sri Satya Vennela Date: Thu, 14 May 2026 12:41:51 -0700 Subject: net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp() re-reads the same field from the same DMA buffer for test_bit() and pointer arithmetic. DMA-coherent memory is mapped uncacheable on x86 and is shared, unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes directly to host-visible memory. A H/W can modify the value between the check and the use, bypassing the bounds validation. Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a stack-local variable in mana_hwc_rx_event_handler(), and passing the validated value as a parameter to mana_hwc_handle_resp(). Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Erni Sri Satya Vennela Link: https://patch.msgid.link/20260514194156.466823-1-ernis@linux.microsoft.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/microsoft/mana/hw_channel.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/microsoft/mana/hw_channel.c b/drivers/net/ethernet/microsoft/mana/hw_channel.c index dbbde0fa57e7..fd8b324d7fb6 100644 --- a/drivers/net/ethernet/microsoft/mana/hw_channel.c +++ b/drivers/net/ethernet/microsoft/mana/hw_channel.c @@ -77,21 +77,19 @@ static int mana_hwc_post_rx_wqe(const struct hwc_wq *hwc_rxq, } static void mana_hwc_handle_resp(struct hw_channel_context *hwc, u32 resp_len, - struct hwc_work_request *rx_req) + struct hwc_work_request *rx_req, u16 msg_id) { const struct gdma_resp_hdr *resp_msg = rx_req->buf_va; struct hwc_caller_ctx *ctx; int err; - if (!test_bit(resp_msg->response.hwc_msg_id, - hwc->inflight_msg_res.map)) { - dev_err(hwc->dev, "hwc_rx: invalid msg_id = %u\n", - resp_msg->response.hwc_msg_id); + if (!test_bit(msg_id, hwc->inflight_msg_res.map)) { + dev_err(hwc->dev, "hwc_rx: invalid msg_id = %u\n", msg_id); mana_hwc_post_rx_wqe(hwc->rxq, rx_req); return; } - ctx = hwc->caller_ctx + resp_msg->response.hwc_msg_id; + ctx = hwc->caller_ctx + msg_id; err = mana_hwc_verify_resp_msg(ctx, resp_msg, resp_len); if (err) goto out; @@ -251,6 +249,7 @@ static void mana_hwc_rx_event_handler(void *ctx, u32 gdma_rxq_id, struct gdma_sge *sge; u64 rq_base_addr; u64 rx_req_idx; + u16 msg_id; u8 *wqe; if (WARN_ON_ONCE(hwc_rxq->gdma_wq->id != gdma_rxq_id)) @@ -269,13 +268,17 @@ static void mana_hwc_rx_event_handler(void *ctx, u32 gdma_rxq_id, rx_req = &hwc_rxq->msg_buf->reqs[rx_req_idx]; resp = (struct gdma_resp_hdr *)rx_req->buf_va; - if (resp->response.hwc_msg_id >= hwc->num_inflight_msg) { - dev_err(hwc->dev, "HWC RX: wrong msg_id=%u\n", - resp->response.hwc_msg_id); + /* Read msg_id once from DMA buffer to prevent TOCTOU: + * DMA memory is shared/unencrypted in CVMs - host can + * modify it between reads. + */ + msg_id = READ_ONCE(resp->response.hwc_msg_id); + if (msg_id >= hwc->num_inflight_msg) { + dev_err(hwc->dev, "HWC RX: wrong msg_id=%u\n", msg_id); return; } - mana_hwc_handle_resp(hwc, rx_oob->tx_oob_data_size, rx_req); + mana_hwc_handle_resp(hwc, rx_oob->tx_oob_data_size, rx_req, msg_id); /* Can no longer use 'resp', because the buffer is posted to the HW * in mana_hwc_handle_resp() above. -- cgit v1.2.3 From 0488073a6c84571dd3cffe581a4a73a5fceb099d Mon Sep 17 00:00:00 2001 From: Oliver White Date: Thu, 9 Apr 2026 15:43:47 +1200 Subject: platform/surface: aggregator_registry: omit battery & AC nodes on Surface Laptop 7 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Surface Laptop 7 exposes battery and AC status via Qualcomm PMIC GLINK qcom_battmgr. Registering the standard SSAM battery and AC client devices on this platform causes duplicate power-supply devices to appear. Drop the SSAM battery and AC nodes from the Surface Laptop 7 registry group so that only the qcom_battmgr power supplies are instantiated. Fixes: b27622f13172 ("platform/surface: Add OF support") Signed-off-by: Oliver White Link: https://patch.msgid.link/20260409034347.17381-1-oliverjwhite07@gmail.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/surface/surface_aggregator_registry.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/platform/surface/surface_aggregator_registry.c b/drivers/platform/surface/surface_aggregator_registry.c index 0599d5adf02e..f0881edfb616 100644 --- a/drivers/platform/surface/surface_aggregator_registry.c +++ b/drivers/platform/surface/surface_aggregator_registry.c @@ -295,8 +295,6 @@ static const struct software_node *ssam_node_group_sl6[] = { /* Devices for Surface Laptop 7. */ static const struct software_node *ssam_node_group_sl7[] = { &ssam_node_root, - &ssam_node_bat_ac, - &ssam_node_bat_main, &ssam_node_tmp_perf_profile_with_fan, &ssam_node_fan_speed, &ssam_node_hid_sam_keyboard, -- cgit v1.2.3 From 50c2d91c5dfa0e465826ec1f8dbad9cdc254bd85 Mon Sep 17 00:00:00 2001 From: Shardul Bankar Date: Fri, 15 May 2026 06:27:32 +0200 Subject: mptcp: do not drop partial packets When a packet arrives with map_seq < ack_seq < end_seq, the beginning of the packet has already been acknowledged but the end contains new data. Currently the entire packet is dropped as "old data," forcing the sender to retransmit. Instead, skip the already-acked bytes by adjusting the skb offset and enqueue only the new portion. Update bytes_received and ack_seq to reflect the new data consumed. A previous attempt at this fix has been sent by Paolo Abeni [1], but had issues [2]: it also added a zero-window check and changed rcv_wnd_sent initialization, which caused test regressions. This version addresses only the partial packet handling without modifying receive window accounting. Fixes: ab174ad8ef76 ("mptcp: move ooo skbs into msk out of order queue.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/c9b426a4e163aa3c4fe8b80c79f1a610f47ae7d8.1763075056.git.pabeni@redhat.com [1] Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/600 [2] Signed-off-by: Shardul Bankar [pabeni@redhat.com: update map] Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-1-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni --- net/mptcp/protocol.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 4546a8b09884..859df49e16dc 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -397,12 +397,26 @@ static bool __mptcp_move_skb(struct sock *sk, struct sk_buff *skb) return false; } - /* old data, keep it simple and drop the whole pkt, sender - * will retransmit as needed, if needed. + /* Completely old data? */ + if (!after64(MPTCP_SKB_CB(skb)->end_seq, msk->ack_seq)) { + MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_DUPDATA); + mptcp_drop(sk, skb); + return false; + } + + /* Partial packet: map_seq < ack_seq < end_seq. + * Skip the already-acked bytes and enqueue the new data. */ - MPTCP_INC_STATS(sock_net(sk), MPTCP_MIB_DUPDATA); - mptcp_drop(sk, skb); - return false; + copy_len = MPTCP_SKB_CB(skb)->end_seq - msk->ack_seq; + MPTCP_SKB_CB(skb)->offset += msk->ack_seq - MPTCP_SKB_CB(skb)->map_seq; + MPTCP_SKB_CB(skb)->map_seq += msk->ack_seq - + MPTCP_SKB_CB(skb)->map_seq; + msk->bytes_received += copy_len; + WRITE_ONCE(msk->ack_seq, msk->ack_seq + copy_len); + + skb_set_owner_r(skb, sk); + __skb_queue_tail(&sk->sk_receive_queue, skb); + return true; } static void mptcp_stop_rtx_timer(struct sock *sk) -- cgit v1.2.3 From 51e398a3b8961b26a8c0a4ba9a777c5339791707 Mon Sep 17 00:00:00 2001 From: Li Xiasong Date: Fri, 15 May 2026 06:27:33 +0200 Subject: mptcp: pm: fix ADD_ADDR timer infinite retry on option space insufficient When TCP option space is insufficient (e.g., when sending ADD_ADDR with an IPv6 address and port while tcp_timestamps is enabled), the original code jumped to out_unlock without clearing the addr_signal flag. This caused mptcp_pm_add_timer to keep rescheduling indefinitely, not sending ADD_ADDR, preventing subsequent addresses in the endpoint list from being announced. Handle this case by clearing the ADD_ADDR signal and skipping the matching ADD_ADDR retransmission entry. The skip path cancels the matching timer (with id check) and advances PM state progression, preserving forward progress to subsequent PM work. This cancellation is inherently best-effort. A concurrent add_timer callback may already be running and may acquire pm.lock before the cancel path updates entry state. In that case, one final ADD_ADDR transmit attempt can still be executed. Once the cancel path sets entry->retrans_times to ADD_ADDR_RETRANS_MAX, the callback-side retrans_times check suppresses further ADD_ADDR retransmissions. Note that when an ADD_ADDR is being prepared, a pure-ACK is queued. On the output side, it means that it is fine to skip non-pure-ACK packets, when drop_other_suboptions is set: a pure-ACK will be processed soon after. Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Signed-off-by: Li Xiasong Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-2-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni --- net/mptcp/pm.c | 56 ++++++++++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 46 insertions(+), 10 deletions(-) diff --git a/net/mptcp/pm.c b/net/mptcp/pm.c index 3c152bf66cd5..3e770c7407e1 100644 --- a/net/mptcp/pm.c +++ b/net/mptcp/pm.c @@ -364,7 +364,13 @@ static void mptcp_pm_add_timer(struct timer_list *timer) spin_lock_bh(&msk->pm.lock); - if (!mptcp_pm_should_add_signal_addr(msk)) { + /* The cancel path (mptcp_pm_del_add_timer()) can race with this + * callback. Once cancel updates retrans_times to MAX, suppress further + * retransmissions here. If this callback acquires pm.lock first, one + * final transmit attempt is still possible. + */ + if (entry->retrans_times < ADD_ADDR_RETRANS_MAX && + !mptcp_pm_should_add_signal_addr(msk)) { pr_debug("retransmit ADD_ADDR id=%d\n", entry->addr.id); mptcp_pm_announce_addr(msk, &entry->addr, false); mptcp_pm_add_addr_send_ack(msk); @@ -414,8 +420,12 @@ mptcp_pm_del_add_timer(struct mptcp_sock *msk, /* Note: entry might have been removed by another thread. * We hold rcu_read_lock() to ensure it is not freed under us. */ - if (stop_timer) - sk_stop_timer_sync(sk, &entry->add_timer); + if (stop_timer) { + if (check_id) + sk_stop_timer(sk, &entry->add_timer); + else + sk_stop_timer_sync(sk, &entry->add_timer); + } rcu_read_unlock(); return entry; @@ -882,6 +892,7 @@ bool mptcp_pm_add_addr_signal(struct mptcp_sock *msk, const struct sk_buff *skb, struct mptcp_addr_info *addr, bool *echo, bool *drop_other_suboptions) { + bool skip_add_addr = false; int ret = false; u8 add_addr; u8 family; @@ -903,24 +914,49 @@ bool mptcp_pm_add_addr_signal(struct mptcp_sock *msk, const struct sk_buff *skb, } *echo = mptcp_pm_should_add_signal_echo(msk); - port = !!(*echo ? msk->pm.remote.port : msk->pm.local.port); - - family = *echo ? msk->pm.remote.family : msk->pm.local.family; - if (remaining < mptcp_add_addr_len(family, *echo, port)) - goto out_unlock; - if (*echo) { *addr = msk->pm.remote; add_addr = msk->pm.addr_signal & ~BIT(MPTCP_ADD_ADDR_ECHO); + port = !!msk->pm.remote.port; + family = msk->pm.remote.family; } else { *addr = msk->pm.local; add_addr = msk->pm.addr_signal & ~BIT(MPTCP_ADD_ADDR_SIGNAL); + port = !!msk->pm.local.port; + family = msk->pm.local.family; } - WRITE_ONCE(msk->pm.addr_signal, add_addr); + + if (remaining < mptcp_add_addr_len(family, *echo, port)) { + struct net *net = sock_net((struct sock *)msk); + + if (!*drop_other_suboptions) + goto out_unlock; + + if (*echo) { + MPTCP_INC_STATS(net, MPTCP_MIB_ECHOADDTXDROP); + } else { + skip_add_addr = true; + MPTCP_INC_STATS(net, MPTCP_MIB_ADDADDRTXDROP); + } + goto drop_signal_mark; + } + ret = true; +drop_signal_mark: + WRITE_ONCE(msk->pm.addr_signal, add_addr); + out_unlock: spin_unlock_bh(&msk->pm.lock); + + /* On pure-ACK option-space exhaustion, stop retrying this ADD_ADDR: + * clear the signal bit, cancel the matching retransmission timer, and + * let the PM state machine progress. + */ + if (skip_add_addr) { + mptcp_pm_del_add_timer(msk, addr, true); + mptcp_pm_subflow_established(msk); + } return ret; } -- cgit v1.2.3 From fc5ef4331810b160427ad2d0165dff713e968e9b Mon Sep 17 00:00:00 2001 From: Li Xiasong Date: Fri, 15 May 2026 06:27:34 +0200 Subject: selftests: mptcp: join: cover ADD_ADDR tx drop and list progress Extend add_addr_ports_tests with IPv6 signaling cases that exercise ADD_ADDR tx-space shortage when tcp_timestamps are enabled. Add one case to verify PM still progresses to later signal endpoints after the first one is dropped. This covers both failure accounting and the non-blocking behavior of the announce list after a tx-space drop on pure ACK. Signed-off-by: Li Xiasong Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-3-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni --- tools/testing/selftests/net/mptcp/mptcp_join.sh | 31 +++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh index beec41f6662a..5acd12021e6e 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh @@ -1828,6 +1828,22 @@ chk_add_tx_nr() fi } +chk_add_drop_tx_nr() +{ + local drop_tx_nr=$1 + local count + + print_check "add addr tx drop" + count=$(mptcp_lib_get_counter ${ns1} "MPTcpExtAddAddrTxDrop") + if [ -z "$count" ]; then + print_skip + elif [ "$count" != "$drop_tx_nr" ]; then + fail_test "got $count ADD_ADDR drop[s] TX, expected $drop_tx_nr" + else + print_ok + fi +} + chk_rm_nr() { local rm_addr_nr=$1 @@ -3278,6 +3294,21 @@ add_addr_ports_tests() chk_mpc_endp_attempt ${retl} 1 fi + + # first signal address drops, second one still progresses + if reset "signal addr list progresses after tx drop"; then + pm_nl_set_limits $ns1 0 2 + pm_nl_set_limits $ns2 1 0 + ip netns exec $ns1 sysctl -q net.ipv4.tcp_timestamps=1 + ip netns exec $ns2 sysctl -q net.ipv4.tcp_timestamps=1 + + pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal port 10100 + pm_nl_add_endpoint $ns1 dead:beef:3::1 flags signal + run_tests $ns1 $ns2 dead:beef:1::1 + chk_add_drop_tx_nr 1 + chk_add_tx_nr 1 1 + chk_add_nr 1 1 0 + fi } bind_tests() -- cgit v1.2.3 From 0981f90e1a05773a4c29c6e720f5ea1e3c8f1876 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Fri, 15 May 2026 06:27:35 +0200 Subject: mptcp: reset rcv wnd on disconnect If the MPTCP socket fallback to TCP before the MP handshake completion, the IASN remain 0, and the rcv_wnd_sent field is not explicitly initialized, just incremented over time with the data transfer. At disconnect time such value is not cleared. If the next connection falls back to TCP before the MP handshake completion, the data transfer will keep incrementing the receive window end sequence starting from the last value used in the previous connection: the announced window will be unrelated from the actual receiver buffer size and likely too big. Address the issue zeroing the field at disconnect time. Fixes: b29fcfb54cd7 ("mptcp: full disconnect implementation") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-4-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni --- net/mptcp/protocol.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c index 859df49e16dc..a72a6ad6ee8b 100644 --- a/net/mptcp/protocol.c +++ b/net/mptcp/protocol.c @@ -3487,6 +3487,7 @@ static int mptcp_disconnect(struct sock *sk, int flags) /* for fallback's sake */ WRITE_ONCE(msk->ack_seq, 0); + atomic64_set(&msk->rcv_wnd_sent, 0); WRITE_ONCE(sk->sk_shutdown, 0); sk_error_report(sk); -- cgit v1.2.3 From 3a543ae0e2092d5c2085d5f21f7a7dbafdffea3c Mon Sep 17 00:00:00 2001 From: Gang Yan Date: Fri, 15 May 2026 06:27:36 +0200 Subject: mptcp: update window_clamp on subflows when SO_RCVBUF is set Add __mptcp_subflow_set_rcvbuf() helper to write the subflow sk_rcvbuf, but also to call the recently added tcp_set_rcvbuf() helper to update window_clamp. This is needed because the window clap is updated when scaling_ratio changes, in tcp_measure_rcv_mss(). Until scaling_ratio changes, the subflow is stuck with the old window clamp which may be based on a small initial buffer. Use this new helper in both mptcp_sol_socket_sync_intval() (setsockopt path) and sync_socket_options() (new subflow creation path). Note that this patch depends on commit b025461303d8 ("tcp: update window_clamp when SO_RCVBUF is set"): it fixes the issue on TCP side, but the same fix is needed on MPTCP side as well. Fixes: a2cbb1603943 ("tcp: Update window clamping condition") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/619 Signed-off-by: Gang Yan Reviewed-by: Matthieu Baerts (NGI0) Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-5-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni --- net/mptcp/sockopt.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/net/mptcp/sockopt.c b/net/mptcp/sockopt.c index 1cf608e7357b..87b5796d0135 100644 --- a/net/mptcp/sockopt.c +++ b/net/mptcp/sockopt.c @@ -67,6 +67,12 @@ static int mptcp_get_int_option(struct mptcp_sock *msk, sockptr_t optval, return 0; } +static void __mptcp_subflow_set_rcvbuf(struct sock *ssk, int val) +{ + WRITE_ONCE(ssk->sk_rcvbuf, val); + tcp_set_rcvbuf(ssk, val); +} + static void mptcp_sol_socket_sync_intval(struct mptcp_sock *msk, int optname, int val) { struct mptcp_subflow_context *subflow; @@ -100,7 +106,7 @@ static void mptcp_sol_socket_sync_intval(struct mptcp_sock *msk, int optname, in case SO_RCVBUF: case SO_RCVBUFFORCE: ssk->sk_userlocks |= SOCK_RCVBUF_LOCK; - WRITE_ONCE(ssk->sk_rcvbuf, sk->sk_rcvbuf); + __mptcp_subflow_set_rcvbuf(ssk, sk->sk_rcvbuf); break; case SO_MARK: if (READ_ONCE(ssk->sk_mark) != sk->sk_mark) { @@ -1560,7 +1566,7 @@ static void sync_socket_options(struct mptcp_sock *msk, struct sock *ssk) mptcp_subflow_ctx(ssk)->cached_sndbuf = sk->sk_sndbuf; } if (sk->sk_userlocks & SOCK_RCVBUF_LOCK) - WRITE_ONCE(ssk->sk_rcvbuf, sk->sk_rcvbuf); + __mptcp_subflow_set_rcvbuf(ssk, sk->sk_rcvbuf); } if (sock_flag(sk, SOCK_LINGER)) { -- cgit v1.2.3 From 01ff78e4b3d98689184c52d97f9575dfbdc3b10f Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" Date: Fri, 15 May 2026 06:27:37 +0200 Subject: selftests: mptcp: drop nanoseconds width specifier Using the format specifier +%s%3N with GNU date is honoured, and only prints 3 digits of the nanoseconds portion of the seconds since epoch, which corresponds to the milliseconds. The uutils implementation of date currently does not honour this, and always prints all 9 digits. This is a known issue [1], but can be worked around by adapting this test to use nanoseconds instead of microseconds, and then divide it by 1e6. This fix is similar to what has been done on systemd side [2], and it is needed to run the selftests on Ubuntu 26.04, containing uutils 0.8.0. Note that the Fixes tag is there even if this patch doesn't fix an issue in the kernel selftests, but it is useful for those using uutils 0.8.0. Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Cc: stable@vger.kernel.org Link: https://github.com/uutils/coreutils/issues/11658 [1] Link: https://github.com/systemd/systemd/pull/41627 [2] Signed-off-by: Matthieu Baerts (NGI0) Link: https://patch.msgid.link/20260515-net-mptcp-misc-fixes-7-1-rc4-v2-6-701e96419f2f@kernel.org Signed-off-by: Paolo Abeni --- tools/testing/selftests/net/mptcp/mptcp_connect.sh | 6 +++--- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 10 +++++----- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/net/mptcp/mptcp_connect.sh b/tools/testing/selftests/net/mptcp/mptcp_connect.sh index a6447f7a31fe..d158678fa6ab 100755 --- a/tools/testing/selftests/net/mptcp/mptcp_connect.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_connect.sh @@ -401,7 +401,7 @@ do_transfer() mptcp_lib_wait_local_port_listen "${listener_ns}" "${port}" local start - start=$(date +%s%3N) + start=$(date +%s%N) ip netns exec ${connector_ns} \ ./mptcp_connect -t ${timeout_poll} -p $port -s ${cl_proto} \ $extra_args $connect_addr < "$cin" > "$cout" & @@ -423,7 +423,7 @@ do_transfer() fi local stop - stop=$(date +%s%3N) + stop=$(date +%s%N) if $capture; then sleep 1 @@ -439,7 +439,7 @@ do_transfer() fi local duration - duration=$((stop-start)) + duration=$(((stop-start) / 1000000)) printf "(duration %05sms) " "${duration}" if [ ${rets} -ne 0 ] || [ ${retc} -ne 0 ] || [ ${timeout_pid} -ne 0 ]; then mptcp_lib_pr_fail "client exit code $retc, server $rets" diff --git a/tools/testing/selftests/net/mptcp/mptcp_lib.sh b/tools/testing/selftests/net/mptcp/mptcp_lib.sh index 989a5975dcea..5ef6033775c8 100644 --- a/tools/testing/selftests/net/mptcp/mptcp_lib.sh +++ b/tools/testing/selftests/net/mptcp/mptcp_lib.sh @@ -28,7 +28,7 @@ declare -rx MPTCP_LIB_AF_INET6=10 MPTCP_LIB_SUBTESTS=() MPTCP_LIB_SUBTESTS_DUPLICATED=0 MPTCP_LIB_SUBTEST_FLAKY=0 -MPTCP_LIB_SUBTESTS_LAST_TS_MS= +MPTCP_LIB_SUBTESTS_LAST_TS_NS= MPTCP_LIB_TEST_COUNTER=0 MPTCP_LIB_TEST_FORMAT="%02u %-50s" MPTCP_LIB_IP_MPTCP=0 @@ -236,7 +236,7 @@ mptcp_lib_kversion_ge() { } mptcp_lib_subtests_last_ts_reset() { - MPTCP_LIB_SUBTESTS_LAST_TS_MS="$(date +%s%3N)" + MPTCP_LIB_SUBTESTS_LAST_TS_NS="$(date +%s%N)" } mptcp_lib_subtests_last_ts_reset @@ -255,7 +255,7 @@ __mptcp_lib_result_check_duplicated() { __mptcp_lib_result_add() { local result="${1}" local time="time=" - local ts_prev_ms + local ts_prev_ns shift local id=$((${#MPTCP_LIB_SUBTESTS[@]} + 1)) @@ -265,9 +265,9 @@ __mptcp_lib_result_add() { # not to add two '#' [[ "${*}" != *"#"* ]] && time="# ${time}" - ts_prev_ms="${MPTCP_LIB_SUBTESTS_LAST_TS_MS}" + ts_prev_ns="${MPTCP_LIB_SUBTESTS_LAST_TS_NS}" mptcp_lib_subtests_last_ts_reset - time+="$((MPTCP_LIB_SUBTESTS_LAST_TS_MS - ts_prev_ms))ms" + time+="$(((MPTCP_LIB_SUBTESTS_LAST_TS_NS - ts_prev_ns) / 1000000))ms" MPTCP_LIB_SUBTESTS+=("${result} ${id} - ${KSFT_TEST}: ${*} ${time}") } -- cgit v1.2.3 From e7537735028c3ad4b0bfc02ff8fa2a1a28aa04fe Mon Sep 17 00:00:00 2001 From: Heechan Kang Date: Sun, 17 May 2026 15:22:32 +0900 Subject: fwctl: pds: Validate RPC input size before parsing The fwctl core allocates the device-specific RPC input buffer with fwctl_rpc.in_len and passes that buffer to the driver callback. pdsfc_fw_rpc() casts the buffer to struct fwctl_rpc_pds and then calls pdsfc_validate_rpc(), which reads fields from that structure before checking that the input buffer is large enough to contain it. A short in_len can make pds_fwctl read beyond the allocation. Reject pds RPC buffers that are smaller than struct fwctl_rpc_pds before parsing any pds-specific fields. Fixes: 92c66ee829b9 ("pds_fwctl: add rpc and query support") Link: https://patch.msgid.link/r/20260517062232.1858747-1-gganji11@naver.com Cc: stable@vger.kernel.org # v6.15+ Signed-off-by: Heechan Kang Reviewed-by: Dave Jiang Signed-off-by: Jason Gunthorpe --- drivers/fwctl/pds/main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/fwctl/pds/main.c b/drivers/fwctl/pds/main.c index 08872ee8422f..68fe254dd10a 100644 --- a/drivers/fwctl/pds/main.c +++ b/drivers/fwctl/pds/main.c @@ -362,6 +362,9 @@ static void *pdsfc_fw_rpc(struct fwctl_uctx *uctx, enum fwctl_rpc_scope scope, void *out = NULL; int err; + if (in_len < sizeof(*rpc)) + return ERR_PTR(-EINVAL); + err = pdsfc_validate_rpc(pdsfc, rpc, scope); if (err) return ERR_PTR(err); -- cgit v1.2.3 From 00c9753435e8a800761feeeea029a83c4c4847c4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=D0=9A=D0=BE=D0=BD=D0=B5=D0=BD=D0=BA=D0=BE=20=D0=90=D0=BD?= =?UTF-8?q?=D0=B4=D1=80=D0=B5=D0=B9=20=D0=92=D0=B8=D0=BA=D1=82=D0=BE=D1=80?= =?UTF-8?q?=D0=BE=D0=B2=D0=B8=D1=87?= Date: Tue, 19 May 2026 16:37:42 +0300 Subject: =?UTF-8?q?hp-wmi:=20fix=20support=20for=20thermal=20profile=20Ome?= =?UTF-8?q?n=2016-=D1=810xxx=20laptops?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The HP Omen 16-c0xxx (board ID: 8902) has the same WMI interface as other Victus S boards, but requires additional quirks for correctly switching thermal profile. Add the DMI board name to victus_s_thermal_profile_boards[] table and map it to the omen_v1_legacy_thermal_params quirk. Testing on board 8902 confirmed that platform profile is registered successfully and fan RPMs are readable and controllable. Signed-off-by: Konenko Andrey Viktorovich Link: https://patch.msgid.link/T3DTKbKwQzOgk_0eUG-kMg@aquinas.su Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/hp/hp-wmi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c index 6950bec2a9d8..f63bc00d9a9b 100644 --- a/drivers/platform/x86/hp/hp-wmi.c +++ b/drivers/platform/x86/hp/hp-wmi.c @@ -189,6 +189,10 @@ static const char * const victus_thermal_profile_boards[] = { /* DMI Board names of Victus 16-r and Victus 16-s laptops */ static const struct dmi_system_id victus_s_thermal_profile_boards[] __initconst = { + { + .matches = { DMI_MATCH(DMI_BOARD_NAME, "8902") }, + .driver_data = (void *)&omen_v1_legacy_thermal_params, + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "8A44") }, .driver_data = (void *)&omen_v1_legacy_thermal_params, -- cgit v1.2.3 From e7a9a6ea40e352cd7977f6a8c80bdeadf65ad838 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 17:11:49 +0200 Subject: platform/x86: adv_swbutton: Check ACPI_HANDLE() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 adv_swbutton driver. Fixes: 3d904005f686 ("platform/x86: add support for Advantech software defined button") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/5115425.31r3eYUQgx@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/adv_swbutton.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/adv_swbutton.c b/drivers/platform/x86/adv_swbutton.c index 6fa60f3fc53c..8f7a26e6de81 100644 --- a/drivers/platform/x86/adv_swbutton.c +++ b/drivers/platform/x86/adv_swbutton.c @@ -48,10 +48,14 @@ static int adv_swbutton_probe(struct platform_device *device) { struct adv_swbutton *button; struct input_dev *input; - acpi_handle handle = ACPI_HANDLE(&device->dev); + acpi_handle handle; acpi_status status; int error; + handle = ACPI_HANDLE(&device->dev); + if (!handle) + return -ENODEV; + button = devm_kzalloc(&device->dev, sizeof(*button), GFP_KERNEL); if (!button) return -ENOMEM; -- cgit v1.2.3 From abfbe5ee8ae89f1f5449790423d5dd3e423545bd Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 17:12:40 +0200 Subject: platform/x86: hp_accel: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 hp_accel driver. Fixes: 8ebcb6c94c71 ("platform/x86: hp_accel: Convert to be a platform driver") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/2425918.ElGaqSPkdT@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/hp/hp_accel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/platform/x86/hp/hp_accel.c b/drivers/platform/x86/hp/hp_accel.c index 10d5af18d639..39b73dc473f1 100644 --- a/drivers/platform/x86/hp/hp_accel.c +++ b/drivers/platform/x86/hp/hp_accel.c @@ -300,6 +300,9 @@ static int lis3lv02d_probe(struct platform_device *device) int ret; lis3_dev.bus_priv = ACPI_COMPANION(&device->dev); + if (!lis3_dev.bus_priv) + return -ENODEV; + lis3_dev.init = lis3lv02d_acpi_init; lis3_dev.read = lis3lv02d_acpi_read; lis3_dev.write = lis3lv02d_acpi_write; -- cgit v1.2.3 From 5c69e090ae5dd93d910f70db0796357080707d26 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 17:13:28 +0200 Subject: platform/x86: intel-hid: Check ACPI_HANDLE() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 intel-hid driver. Fixes: ecc83e52b28c ("intel-hid: new hid event driver for hotkeys") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/1971512.tdWV9SEqCh@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/hid.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c index 2ddd8af8c1ce..085093506dda 100644 --- a/drivers/platform/x86/intel/hid.c +++ b/drivers/platform/x86/intel/hid.c @@ -688,12 +688,16 @@ static bool button_array_present(struct platform_device *device) static int intel_hid_probe(struct platform_device *device) { - acpi_handle handle = ACPI_HANDLE(&device->dev); unsigned long long mode, dummy; struct intel_hid_priv *priv; + acpi_handle handle; acpi_status status; int err; + handle = ACPI_HANDLE(&device->dev); + if (!handle) + return -ENODEV; + intel_hid_init_dsm(handle); if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_HDMM_FN, &mode)) { -- cgit v1.2.3 From 2765f16c12af7c2533763e46b8113b727354012d Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 17:15:32 +0200 Subject: platform/x86: intel_sar: Check ACPI_HANDLE() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 intel_sar driver. Fixes: dcfbd31ef4bc ("platform/x86: BIOS SAR driver for Intel M.2 Modem") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/14023870.uLZWGnKmhe@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/int1092/intel_sar.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel/int1092/intel_sar.c b/drivers/platform/x86/intel/int1092/intel_sar.c index 88822023a149..849f7b415c1e 100644 --- a/drivers/platform/x86/intel/int1092/intel_sar.c +++ b/drivers/platform/x86/intel/int1092/intel_sar.c @@ -245,15 +245,20 @@ static void sar_get_data(int reg, struct wwan_sar_context *context) static int sar_probe(struct platform_device *device) { struct wwan_sar_context *context; + acpi_handle handle; int reg; int result; + handle = ACPI_HANDLE(&device->dev); + if (!handle) + return -ENODEV; + context = kzalloc_obj(*context); if (!context) return -ENOMEM; context->sar_device = device; - context->handle = ACPI_HANDLE(&device->dev); + context->handle = handle; dev_set_drvdata(&device->dev, context); result = guid_parse(SAR_DSM_UUID, &context->guid); -- cgit v1.2.3 From a9f305c5a355efeb240d406d378491d9eec02d07 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 17:16:22 +0200 Subject: platform/x86: intel-vbtn: Check ACPI_HANDLE() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 intel-vbtn driver. Fixes: 26173179fae1 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/3426431.aeNJFYEL58@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/vbtn.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel/vbtn.c b/drivers/platform/x86/intel/vbtn.c index 9ca87e707582..874023c38fd1 100644 --- a/drivers/platform/x86/intel/vbtn.c +++ b/drivers/platform/x86/intel/vbtn.c @@ -275,12 +275,16 @@ static bool intel_vbtn_has_switches(acpi_handle handle, bool dual_accel) static int intel_vbtn_probe(struct platform_device *device) { - acpi_handle handle = ACPI_HANDLE(&device->dev); bool dual_accel, has_buttons, has_switches; struct intel_vbtn_priv *priv; + acpi_handle handle; acpi_status status; int err; + handle = ACPI_HANDLE(&device->dev); + if (!handle) + return -ENODEV; + dual_accel = dual_accel_detect(); has_buttons = acpi_has_method(handle, "VBDL"); has_switches = intel_vbtn_has_switches(handle, dual_accel); -- cgit v1.2.3 From 5798b46271e229dab05e47537ac30b76f81728da Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 18:30:26 +0200 Subject: platform/surface: surfacepro3_button: Check ACPI_COMPANION() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the surfacepro3_button driver. Fixes: d913a5a12b40 ("platform/surface: surfacepro3_button: Convert to a platform driver") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Reviewed-by: Chen Yu Link: https://patch.msgid.link/23119222.EfDdHjke4D@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/surface/surfacepro3_button.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/platform/surface/surfacepro3_button.c b/drivers/platform/surface/surfacepro3_button.c index 0293bc517b54..388a3e1a488c 100644 --- a/drivers/platform/surface/surfacepro3_button.c +++ b/drivers/platform/surface/surfacepro3_button.c @@ -185,12 +185,15 @@ static bool surface_button_check_MSHW0040(struct device *dev, acpi_handle handle static int surface_button_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); struct surface_button *button; + struct acpi_device *device; struct input_dev *input; - const char *hid = acpi_device_hid(device); int error; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + if (strncmp(acpi_device_bid(device), SURFACE_BUTTON_OBJ_NAME, strlen(SURFACE_BUTTON_OBJ_NAME))) return -ENODEV; @@ -210,7 +213,8 @@ static int surface_button_probe(struct platform_device *pdev) } strscpy(acpi_device_name(device), SURFACE_BUTTON_DEVICE_NAME); - snprintf(button->phys, sizeof(button->phys), "%s/buttons", hid); + snprintf(button->phys, sizeof(button->phys), "%s/buttons", + acpi_device_hid(device)); input->name = acpi_device_name(device); input->phys = button->phys; -- cgit v1.2.3 From c12cc42dadd85dea210d5699d4f21def827382eb Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Wed, 13 May 2026 01:21:38 +0200 Subject: platform/x86: uniwill-laptop: Properly initialize charging threshold MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The EC might initialize the charge threshold with 0 to signal that said threshold is uninitialized. Detect this and replace said value with 100 to signal the EC that we want to take control of battery charging. Also set the threshold to 100 if the EC-provided value is invalid. Fixes: d050479693bb ("platform/x86: Add Uniwill laptop driver") Reviewed-by: Werner Sembach Signed-off-by: Armin Wolf Link: https://patch.msgid.link/20260512232145.329260-2-W_Armin@gmx.de Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/uniwill/uniwill-acpi.c | 35 ++++++++++++++++++++++++++++- 1 file changed, 34 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/uniwill/uniwill-acpi.c b/drivers/platform/x86/uniwill/uniwill-acpi.c index 945df5092637..d9c202fc8c71 100644 --- a/drivers/platform/x86/uniwill/uniwill-acpi.c +++ b/drivers/platform/x86/uniwill/uniwill-acpi.c @@ -1359,6 +1359,16 @@ static int uniwill_led_init(struct uniwill_data *data) &init_data); } +static unsigned int uniwill_sanitize_battery_threshold(unsigned int value) +{ + /* 0 means "charging threshold not active" */ + if (!value) + return 100; + + /* Guard against invalid values */ + return min(value, 100); +} + static int uniwill_get_property(struct power_supply *psy, const struct power_supply_ext *ext, void *drvdata, enum power_supply_property psp, union power_supply_propval *val) @@ -1405,7 +1415,8 @@ static int uniwill_get_property(struct power_supply *psy, const struct power_sup if (ret < 0) return ret; - val->intval = clamp_val(FIELD_GET(CHARGE_CTRL_MASK, regval), 0, 100); + regval = FIELD_GET(CHARGE_CTRL_MASK, regval); + val->intval = uniwill_sanitize_battery_threshold(regval); return 0; default: return -EINVAL; @@ -1500,11 +1511,33 @@ static int uniwill_remove_battery(struct power_supply *battery, struct acpi_batt static int uniwill_battery_init(struct uniwill_data *data) { + unsigned int value, threshold, sanitized; int ret; if (!uniwill_device_supports(data, UNIWILL_FEATURE_BATTERY)) return 0; + ret = regmap_read(data->regmap, EC_ADDR_CHARGE_CTRL, &value); + if (ret < 0) + return ret; + + /* + * The charge control threshold might be initialized with 0 by + * the EC to signal that said threshold is uninitialized. We thus + * need to replace this placeholder value with a valid one (100) + * to signal that we want to take control of battery charging. + * For the sake of completeness we also apply this to other + * invalid threshold values. + */ + threshold = FIELD_GET(CHARGE_CTRL_MASK, value); + sanitized = uniwill_sanitize_battery_threshold(threshold); + if (threshold != sanitized) { + FIELD_MODIFY(CHARGE_CTRL_MASK, &value, sanitized); + ret = regmap_write(data->regmap, EC_ADDR_CHARGE_CTRL, value); + if (ret < 0) + return ret; + } + ret = devm_mutex_init(data->dev, &data->battery_lock); if (ret < 0) return ret; -- cgit v1.2.3 From c16a4823cc60a32b891f7a148bb30c0f51d12cf4 Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Wed, 13 May 2026 01:21:39 +0200 Subject: platform/x86: uniwill-laptop: Accept charging threshold of 0 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The power supply sysfs ABI states that: Not all hardware is capable of setting this to an arbitrary percentage. Drivers will round written values to the nearest supported value. Reading back the value will show the actual threshold set by the driver. The driver currently violates this ABI by rejecting a charging threshold of 0. Fix this by clamping this value to 1. Fixes: d050479693bb ("platform/x86: Add Uniwill laptop driver") Reviewed-by: Werner Sembach Reviewed-by: Ilpo Järvinen Signed-off-by: Armin Wolf Link: https://patch.msgid.link/20260512232145.329260-3-W_Armin@gmx.de Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/uniwill/uniwill-acpi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/uniwill/uniwill-acpi.c b/drivers/platform/x86/uniwill/uniwill-acpi.c index d9c202fc8c71..1f9e9f61d387 100644 --- a/drivers/platform/x86/uniwill/uniwill-acpi.c +++ b/drivers/platform/x86/uniwill/uniwill-acpi.c @@ -1431,11 +1431,11 @@ static int uniwill_set_property(struct power_supply *psy, const struct power_sup switch (psp) { case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD: - if (val->intval < 1 || val->intval > 100) + if (val->intval < 0 || val->intval > 100) return -EINVAL; return regmap_update_bits(data->regmap, EC_ADDR_CHARGE_CTRL, CHARGE_CTRL_MASK, - val->intval); + max(val->intval, 1)); default: return -EINVAL; } -- cgit v1.2.3 From fb4b67c44557cb4cbb15900083d4e1af22320339 Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Wed, 13 May 2026 01:21:40 +0200 Subject: platform/x86: uniwill-laptop: Fix behavior of "force" module param MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Users might want to force-enable all possible features even on machines with a valid device descriptor. Until now the "force" module param was ignored on such machines. Fix this to make it easier to test for support of new features. Fixes: d050479693bb ("platform/x86: Add Uniwill laptop driver") Reviewed-by: Werner Sembach Reviewed-by: Ilpo Järvinen Signed-off-by: Armin Wolf Link: https://patch.msgid.link/20260512232145.329260-4-W_Armin@gmx.de Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/uniwill/uniwill-acpi.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/uniwill/uniwill-acpi.c b/drivers/platform/x86/uniwill/uniwill-acpi.c index 1f9e9f61d387..481c4cf46e63 100644 --- a/drivers/platform/x86/uniwill/uniwill-acpi.c +++ b/drivers/platform/x86/uniwill/uniwill-acpi.c @@ -2489,8 +2489,6 @@ static int __init uniwill_init(void) if (!force) return -ENODEV; - /* Assume that the device supports all features */ - device_descriptor.features = UINT_MAX; pr_warn("Loading on a potentially unsupported device\n"); } else { /* @@ -2508,6 +2506,12 @@ static int __init uniwill_init(void) device_descriptor = *descriptor; } + if (force) { + /* Assume that the device supports all features */ + device_descriptor.features = UINT_MAX; + pr_warn("Enabling potentially unsupported features\n"); + } + ret = platform_driver_register(&uniwill_driver); if (ret < 0) return ret; -- cgit v1.2.3 From 26cbe119f99c86dcb4a0136d2bc73c0c716d80e4 Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Wed, 13 May 2026 01:21:41 +0200 Subject: platform/x86: uniwill-laptop: Do not enable the charging limit even when forced MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It seems that on some older models (~2020) the battery charging limit can permanently damage the battery. Prevent users from enabling this feature thru the "force" module parameter to avoid causing permanent hardware damage on such devices. Fixes: d050479693bb ("platform/x86: Add Uniwill laptop driver") Link: https://www.reddit.com/r/XMG_gg/comments/ld9yyf/battery_limit_hidden_function_discovered_on/ Reviewed-by: Werner Sembach Reviewed-by: Ilpo Järvinen Signed-off-by: Armin Wolf Link: https://patch.msgid.link/20260512232145.329260-5-W_Armin@gmx.de Signed-off-by: Ilpo Järvinen --- Documentation/admin-guide/laptops/uniwill-laptop.rst | 10 ++++++++++ drivers/platform/x86/uniwill/uniwill-acpi.c | 4 ++-- 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/Documentation/admin-guide/laptops/uniwill-laptop.rst b/Documentation/admin-guide/laptops/uniwill-laptop.rst index 561334865feb..1f3ca84c7d88 100644 --- a/Documentation/admin-guide/laptops/uniwill-laptop.rst +++ b/Documentation/admin-guide/laptops/uniwill-laptop.rst @@ -43,6 +43,11 @@ Support for changing the platform performance mode is currently not implemented. Battery Charging Control ------------------------ +.. warning:: Some devices do not properly implement the charging threshold interface. Forcing + the driver to enable access to said interface on such devices might damage the + battery [1]_. Because of this the driver will not enable said feature even when + using the ``force`` module parameter. + The ``uniwill-laptop`` driver supports controlling the battery charge limit. This happens over the standard ``charge_control_end_threshold`` power supply sysfs attribute. All values between 1 and 100 percent are supported. @@ -70,3 +75,8 @@ The ``uniwill-laptop`` driver allows to set the configurable TGP for devices wit allow it. See Documentation/ABI/testing/sysfs-driver-uniwill-laptop for details. + +References +========== + +.. [1] https://www.reddit.com/r/XMG_gg/comments/ld9yyf/battery_limit_hidden_function_discovered_on/ diff --git a/drivers/platform/x86/uniwill/uniwill-acpi.c b/drivers/platform/x86/uniwill/uniwill-acpi.c index 481c4cf46e63..8cc01bec77b9 100644 --- a/drivers/platform/x86/uniwill/uniwill-acpi.c +++ b/drivers/platform/x86/uniwill/uniwill-acpi.c @@ -2507,8 +2507,8 @@ static int __init uniwill_init(void) } if (force) { - /* Assume that the device supports all features */ - device_descriptor.features = UINT_MAX; + /* Assume that the device supports all features except the charge limit */ + device_descriptor.features = UINT_MAX & ~UNIWILL_FEATURE_BATTERY; pr_warn("Enabling potentially unsupported features\n"); } -- cgit v1.2.3 From 2ccd8ff980b50e842481bae71102fa3883fc4377 Mon Sep 17 00:00:00 2001 From: Vladimir Murzin Date: Fri, 15 May 2026 14:37:29 +0100 Subject: arm64: probes: Handle probes on hinted conditional branch instructions BC.cond instructions introduced by FEAT_HBC cannot be executed out-of-line, like other branch instructions. However, they can be simulated in the same way as B.cond instructions. Extend the B.cond decoder mask to match BC.cond instructions as well, and handle them using the existing B.cond simulation path. Fixes: 7f86d128e437 ("arm64: add HWCAP for FEAT_HBC (hinted conditional branches)") Cc: Signed-off-by: Vladimir Murzin Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/insn.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/insn.h b/arch/arm64/include/asm/insn.h index f463a654a2bb..cc0702fa64a7 100644 --- a/arch/arm64/include/asm/insn.h +++ b/arch/arm64/include/asm/insn.h @@ -409,7 +409,7 @@ __AARCH64_INSN_FUNCS(cbz, 0x7F000000, 0x34000000) __AARCH64_INSN_FUNCS(cbnz, 0x7F000000, 0x35000000) __AARCH64_INSN_FUNCS(tbz, 0x7F000000, 0x36000000) __AARCH64_INSN_FUNCS(tbnz, 0x7F000000, 0x37000000) -__AARCH64_INSN_FUNCS(bcond, 0xFF000010, 0x54000000) +__AARCH64_INSN_FUNCS(bcond, 0xFF000000, 0x54000000) __AARCH64_INSN_FUNCS(svc, 0xFFE0001F, 0xD4000001) __AARCH64_INSN_FUNCS(hvc, 0xFFE0001F, 0xD4000002) __AARCH64_INSN_FUNCS(smc, 0xFFE0001F, 0xD4000003) -- cgit v1.2.3 From 348ccc754d8939e21ca5956ff45720b81d6e407f Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Thu, 14 May 2026 07:40:42 +0200 Subject: platform/x86/intel/vsec: Fix enable_cnt imbalance on PCIe error recovery MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit After a PCIe Uncorrectable Error has been reported by a device with Intel Vendor Specific Extended Capabilities and has been recovered through a Secondary Bus Reset, its driver calls intel_vsec_pci_probe() to rescan and reinitialize VSECs. intel_vsec_pci_probe() invokes pcim_enable_device() and thereby adds another devm action which calls pcim_disable_device() on driver unbind. So once the driver unbinds, pcim_disable_device() will be called as many times as an Uncorrectable Error occurred, plus one. This will lead to an enable_cnt imbalance on driver unbind. Additionally, since commit dc957ab6aa05 ("platform/x86/intel/vsec: Add private data for per-device data"), a devm_kzalloc() allocation is leaked on every Uncorrectable Error. Avoid by splitting the VSEC rescan out of intel_vsec_pci_probe() into a separate helper and calling that on PCIe error recovery. Fixes: 936874b77dd0 ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT") Signed-off-by: Lukas Wunner Cc: stable@vger.kernel.org # v6.0+ Link: https://patch.msgid.link/bd594d09fa866dc51dddc9a447c3b23f9b1402cc.1778736835.git.lukas@wunner.de Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/vsec.c | 54 ++++++++++++++++++++++----------------- 1 file changed, 30 insertions(+), 24 deletions(-) diff --git a/drivers/platform/x86/intel/vsec.c b/drivers/platform/x86/intel/vsec.c index 7d5dbc1c1d05..18e4a892bf0f 100644 --- a/drivers/platform/x86/intel/vsec.c +++ b/drivers/platform/x86/intel/vsec.c @@ -649,29 +649,13 @@ static void intel_vsec_skip_missing_dependencies(struct pci_dev *pdev) } } -static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static int intel_vsec_pci_init(struct pci_dev *pdev) { - const struct intel_vsec_platform_info *info; - struct vsec_priv *priv; - int num_caps, ret; + struct vsec_priv *priv = pci_get_drvdata(pdev); + const struct intel_vsec_platform_info *info = priv->info; int run_once = 0; bool found_any = false; - - ret = pcim_enable_device(pdev); - if (ret) - return ret; - - pci_save_state(pdev); - info = (const struct intel_vsec_platform_info *)id->driver_data; - if (!info) - return -EINVAL; - - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->info = info; - pci_set_drvdata(pdev, priv); + int num_caps; num_caps = hweight_long(info->caps); while (num_caps--) { @@ -692,6 +676,31 @@ static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id return 0; } +static int intel_vsec_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + const struct intel_vsec_platform_info *info; + struct vsec_priv *priv; + int ret; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + pci_save_state(pdev); + info = (const struct intel_vsec_platform_info *)id->driver_data; + if (!info) + return -EINVAL; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->info = info; + pci_set_drvdata(pdev, priv); + + return intel_vsec_pci_init(pdev); +} + int intel_vsec_set_mapping(struct oobmsm_plat_info *plat_info, struct intel_vsec_device *vsec_dev) { @@ -832,7 +841,6 @@ static pci_ers_result_t intel_vsec_pci_slot_reset(struct pci_dev *pdev) { struct intel_vsec_device *intel_vsec_dev; pci_ers_result_t status = PCI_ERS_RESULT_DISCONNECT; - const struct pci_device_id *pci_dev_id; unsigned long index; dev_info(&pdev->dev, "Resetting PCI slot\n"); @@ -853,10 +861,8 @@ static pci_ers_result_t intel_vsec_pci_slot_reset(struct pci_dev *pdev) devm_release_action(&pdev->dev, intel_vsec_remove_aux, &intel_vsec_dev->auxdev); } - pci_disable_device(pdev); pci_restore_state(pdev); - pci_dev_id = pci_match_id(intel_vsec_pci_ids, pdev); - intel_vsec_pci_probe(pdev, pci_dev_id); + intel_vsec_pci_init(pdev); out: return status; -- cgit v1.2.3 From d2d2e7c8fb37b27301ee5c8343b2f7037efc6ea6 Mon Sep 17 00:00:00 2001 From: Ahmed Yaseen Date: Sun, 17 May 2026 18:30:11 +0000 Subject: platform/x86: asus-armoury: fix mini-LED mode get/set on MODE2 devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The mini-LED current_value attribute does not work on devices that use ASUS_WMI_DEVID_MINI_LED_MODE2 (2024 and newer models). Reading is broken: mini_led_mode_current_value_show() fetches the mode from the device but then decodes a literal 0 instead of the value it just read: mode = FIELD_GET(ASUS_MINI_LED_MODE_MASK, 0); So mode is always 0, and the attribute always reports the same thing regardless of the real hardware state. Writing is broken too. The number a user writes is an index; the value the firmware actually wants is looked up from that index in mini_led_mode_map[]. mini_led_mode_current_value_store() skips that lookup and passes the raw index straight to armoury_attr_uint_store(). On 2024 devices the firmware numbers its modes differently from the index, so some writes are rejected with -EINVAL and the rest send the wrong mode to the hardware. Fix both paths: decode the value actually read from the device when reading, and look up the firmware value before sending it when writing. Older (MODE1) devices were unaffected because there the index and the firmware value are the same. Fixes: f99eb098090e ("platform/x86: asus-armoury: move existing tunings to asus-armoury module") Signed-off-by: Ahmed Yaseen Reviewed-by: Denis Benato Link: https://patch.msgid.link/20260517182957.11069-1-yaseen@ghoul.dev Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/asus-armoury.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/asus-armoury.c b/drivers/platform/x86/asus-armoury.c index 5b0987ccc270..495dc1e31d40 100644 --- a/drivers/platform/x86/asus-armoury.c +++ b/drivers/platform/x86/asus-armoury.c @@ -370,7 +370,7 @@ static ssize_t mini_led_mode_current_value_show(struct kobject *kobj, if (err) return err; - mode = FIELD_GET(ASUS_MINI_LED_MODE_MASK, 0); + mode = FIELD_GET(ASUS_MINI_LED_MODE_MASK, mode); for (i = 0; i < mini_led_mode_map_size; i++) if (mode == mini_led_mode_map[i]) @@ -386,6 +386,7 @@ static ssize_t mini_led_mode_current_value_store(struct kobject *kobj, { u32 *mini_led_mode_map; size_t mini_led_mode_map_size; + char mapped_value[12]; u32 mode; int err; @@ -414,9 +415,16 @@ static ssize_t mini_led_mode_current_value_store(struct kobject *kobj, return -ENODEV; } - return armoury_attr_uint_store(kobj, attr, buf, count, - 0, mini_led_mode_map[mode], - NULL, asus_armoury.mini_led_dev_id); + /* + * armoury_attr_uint_store() parses and sends the value from the + * passed buffer; hand it the mapped firmware value so the device + * receives the translated mode instead of the raw index. + */ + snprintf(mapped_value, sizeof(mapped_value), "%u", mini_led_mode_map[mode]); + + return armoury_attr_uint_store(kobj, attr, mapped_value, count, 0, + mini_led_mode_map[mode], NULL, + asus_armoury.mini_led_dev_id); } static ssize_t mini_led_mode_possible_values_show(struct kobject *kobj, -- cgit v1.2.3 From 9ac7c8dc07af88f5169f217fec431c992b4eb550 Mon Sep 17 00:00:00 2001 From: Denis Benato Date: Sun, 17 May 2026 22:00:02 +0000 Subject: platform/x86: asus-armoury: add support for FX607VU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add TDP data for laptop model FX607VU. Signed-off-by: Denis Benato Link: https://patch.msgid.link/20260517220005.4594-2-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/asus-armoury.h | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h index c30d2b451e01..bd394ef94264 100644 --- a/drivers/platform/x86/asus-armoury.h +++ b/drivers/platform/x86/asus-armoury.h @@ -886,6 +886,33 @@ static const struct dmi_system_id power_limits[] = { .requires_fan_curve = true, }, }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "FX607VU"), + }, + .driver_data = &(struct power_data) { + .ac_data = &(struct power_limits) { + .ppt_pl1_spl_min = 28, + .ppt_pl1_spl_def = 115, + .ppt_pl1_spl_max = 135, + .ppt_pl2_sppt_min = 28, + .ppt_pl2_sppt_max = 135, + .nv_dynamic_boost_min = 5, + .nv_dynamic_boost_max = 25, + .nv_temp_target_min = 75, + .nv_temp_target_max = 87, + }, + .dc_data = &(struct power_limits) { + .ppt_pl1_spl_min = 25, + .ppt_pl1_spl_max = 45, + .ppt_pl2_sppt_min = 35, + .ppt_pl2_sppt_max = 60, + .nv_temp_target_min = 75, + .nv_temp_target_max = 87, + }, + .requires_fan_curve = true, + }, + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "GA401Q"), -- cgit v1.2.3 From 239c7acb9e3f73ada3ccce06302f6f3d2d89762d Mon Sep 17 00:00:00 2001 From: Denis Benato Date: Sun, 17 May 2026 22:00:03 +0000 Subject: platform/x86: asus-armoury: add support for G614FR MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add TDP data for laptop model G614FR. Signed-off-by: Denis Benato Link: https://patch.msgid.link/20260517220005.4594-3-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/asus-armoury.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h index bd394ef94264..6c8f46d289d8 100644 --- a/drivers/platform/x86/asus-armoury.h +++ b/drivers/platform/x86/asus-armoury.h @@ -1786,6 +1786,40 @@ static const struct dmi_system_id power_limits[] = { .requires_fan_curve = true, }, }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "G614FR"), + }, + .driver_data = &(struct power_data) { + .ac_data = &(struct power_limits) { + .ppt_pl1_spl_min = 30, + .ppt_pl1_spl_max = 120, + .ppt_pl2_sppt_min = 65, + .ppt_pl2_sppt_def = 140, + .ppt_pl2_sppt_max = 162, + .ppt_pl3_fppt_min = 65, + .ppt_pl3_fppt_def = 140, + .ppt_pl3_fppt_max = 162, + .nv_temp_target_min = 75, + .nv_temp_target_max = 87, + .nv_dynamic_boost_min = 5, + .nv_dynamic_boost_max = 25, + .nv_tgp_min = 65, + .nv_tgp_max = 115, + }, + .dc_data = &(struct power_limits) { + .ppt_pl1_spl_min = 25, + .ppt_pl1_spl_max = 65, + .ppt_pl2_sppt_min = 25, + .ppt_pl2_sppt_max = 65, + .ppt_pl3_fppt_min = 35, + .ppt_pl3_fppt_max = 75, + .nv_temp_target_min = 75, + .nv_temp_target_max = 87, + }, + .requires_fan_curve = true, + }, + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "G614J"), -- cgit v1.2.3 From df1e0b209fa09676585402d5437ee190a424302b Mon Sep 17 00:00:00 2001 From: Denis Benato Date: Sun, 17 May 2026 22:00:04 +0000 Subject: platform/x86: asus-armoury: add support for FA401EA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add TDP data for laptop model FA401EA. Signed-off-by: Denis Benato Link: https://patch.msgid.link/20260517220005.4594-4-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/asus-armoury.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h index 6c8f46d289d8..71df2ca061a7 100644 --- a/drivers/platform/x86/asus-armoury.h +++ b/drivers/platform/x86/asus-armoury.h @@ -346,6 +346,29 @@ struct power_data { * _def is not required and will be assumed to be default == max if missing. */ static const struct dmi_system_id power_limits[] = { + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "FA401EA"), + }, + .driver_data = &(struct power_data) { + .ac_data = &(struct power_limits) { + .ppt_pl1_spl_min = 15, + .ppt_pl1_spl_max = 95, + .ppt_pl2_sppt_min = 35, + .ppt_pl2_sppt_max = 100, + .ppt_pl3_fppt_min = 35, + .ppt_pl3_fppt_max = 115, + }, + .dc_data = &(struct power_limits) { + .ppt_pl1_spl_min = 15, + .ppt_pl1_spl_max = 71, + .ppt_pl2_sppt_min = 35, + .ppt_pl2_sppt_max = 71, + .ppt_pl3_fppt_min = 35, + .ppt_pl3_fppt_max = 71, + }, + }, + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "FA401UM"), -- cgit v1.2.3 From 841ff62aa5f85b13771b33e7b9c102cbaf87432f Mon Sep 17 00:00:00 2001 From: Denis Benato Date: Sun, 17 May 2026 22:00:05 +0000 Subject: platform/x86: asus-armoury: add support for GU605CP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add TDP data for laptop model GU605CP. Signed-off-by: Denis Benato Link: https://patch.msgid.link/20260517220005.4594-5-denis.benato@linux.dev Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/asus-armoury.h | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h index 71df2ca061a7..692978b61959 100644 --- a/drivers/platform/x86/asus-armoury.h +++ b/drivers/platform/x86/asus-armoury.h @@ -1303,6 +1303,35 @@ static const struct dmi_system_id power_limits[] = { }, }, }, + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "GU605CP"), + }, + .driver_data = &(struct power_data) { + .ac_data = &(struct power_limits) { + .ppt_pl1_spl_min = 45, + .ppt_pl1_spl_max = 75, + .ppt_pl2_sppt_min = 56, + .ppt_pl2_sppt_max = 95, + .nv_dynamic_boost_min = 5, + .nv_dynamic_boost_max = 15, + .nv_temp_target_min = 75, + .nv_temp_target_max = 87, + .nv_tgp_min = 55, + .nv_tgp_def = 75, + .nv_tgp_max = 95, + }, + .dc_data = &(struct power_limits) { + .ppt_pl1_spl_min = 25, + .ppt_pl1_spl_max = 75, + .ppt_pl2_sppt_min = 32, + .ppt_pl2_sppt_max = 95, + .nv_temp_target_min = 75, + .nv_temp_target_max = 87, + }, + .requires_fan_curve = true, + }, + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "GU605CR"), -- cgit v1.2.3 From b088fe35019433541225d315263d8477899e0657 Mon Sep 17 00:00:00 2001 From: Guilherme Giacomo Simoes Date: Sun, 3 May 2026 16:16:09 -0300 Subject: x86/vdso: Fix incorrect size in munmap() on map_vdso() failure MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In map_vdso(), if a failure occurs during the installation of the VVAR mappings, the error path attempts to clean up previously allocated mappings using do_munmap(). However, the cleanup for the VVAR mapping is incorrectly using image->size (the size of the vDSO text) instead of the actual size allocated for the VVAR area. Replace the incorrect do_munmap() image->size parameter with the constant VDSO_NR_PAGES * PAGE_SIZE. Ensure the unmap size exactly matches the size used during the vdso_install_vvar_mapping() phase to provide a symmetrical and complete teardown of the memory region. Fixes: e93d2521b27f ("x86/vdso: Split virtual clock pages into dedicated mapping") Signed-off-by: Guilherme Giacomo Simoes Signed-off-by: Thomas Gleixner Reviewed-by: Thomas Weißschuh Link: https://patch.msgid.link/20260503191609.551817-1-trintaeoitogc@gmail.com --- arch/x86/entry/vdso/vma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/entry/vdso/vma.c b/arch/x86/entry/vdso/vma.c index a6bfcc8243cd..d903bce24f15 100644 --- a/arch/x86/entry/vdso/vma.c +++ b/arch/x86/entry/vdso/vma.c @@ -178,7 +178,7 @@ static int map_vdso(const struct vdso_image *image, unsigned long addr) if (IS_ERR(vma)) { ret = PTR_ERR(vma); do_munmap(mm, text_start, image->size, NULL); - do_munmap(mm, addr, image->size, NULL); + do_munmap(mm, addr, VDSO_NR_PAGES * PAGE_SIZE, NULL); goto up_fail; } -- cgit v1.2.3 From 13c6da02e767152c9ac4330962247a5e47011035 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Tue, 19 May 2026 10:03:00 +0200 Subject: efi: Allocate runtime workqueue before ACPI init Since commit 5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers") ACPI PRM calls are delegated to a workqueue which runs in a kernel thread, making it easier to detect and mitigate faulting memory accesses performed by the firmware. Rafael reports that such PRM accesses may occur before efisubsys_init() executes, which is where the workqueue is allocated, leading to NULL pointer dereferences. Since acpi_init() [which triggers the early PRM accesses] executes as a subsys_initcall() as well, and has its own dependencies that may be sensitive to initcall ordering, deferring acpi_init() is not an option. So instead, split off the workqueue allocation into its own postcore initcall, as this is the only missing piece to allow EFI runtime calls to be made. This ensures that EFI runtime call (including PRM calls) are accessible to all code running at subsys_initcall() level. Cc: Fixes: 5894cf571e14 ("acpi/prmt: Use EFI runtime sandbox to invoke PRM handlers") Reviewed-by: Rafael J. Wysocki (Intel) Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/efi.c | 28 ++++++++++++++++------------ 1 file changed, 16 insertions(+), 12 deletions(-) diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index d04be38f1750..318d1cc9a066 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -402,21 +402,11 @@ static void __init efi_debugfs_init(void) static inline void efi_debugfs_init(void) {} #endif -/* - * We register the efi subsystem with the firmware subsystem and the - * efivars subsystem with the efi subsystem, if the system was booted with - * EFI. - */ -static int __init efisubsys_init(void) +static int __init efipostcore_init(void) { - int error; - if (!efi_enabled(EFI_RUNTIME_SERVICES)) efi.runtime_supported_mask = 0; - if (!efi_enabled(EFI_BOOT)) - return 0; - if (efi.runtime_supported_mask) { /* * Since we process only one efi_runtime_service() at a time, an @@ -428,9 +418,23 @@ static int __init efisubsys_init(void) pr_err("Creating efi_rts_wq failed, EFI runtime services disabled.\n"); clear_bit(EFI_RUNTIME_SERVICES, &efi.flags); efi.runtime_supported_mask = 0; - return 0; } } + return 0; +} +postcore_initcall(efipostcore_init); + +/* + * We register the efi subsystem with the firmware subsystem and the + * efivars subsystem with the efi subsystem, if the system was booted with + * EFI. + */ +static int __init efisubsys_init(void) +{ + int error; + + if (!efi_enabled(EFI_BOOT)) + return 0; if (efi_rt_services_supported(EFI_RT_SUPPORTED_TIME_SERVICES)) platform_device_register_simple("rtc-efi", 0, NULL, 0); -- cgit v1.2.3 From 8939562b16052c75b908d3c5f968bffb526fc6e9 Mon Sep 17 00:00:00 2001 From: Rong Tao Date: Mon, 18 May 2026 15:02:08 +0800 Subject: efi: efi.h: Remove extra semicolon Remove extra semicolons from comments. Signed-off-by: Rong Tao Signed-off-by: Ard Biesheuvel --- include/linux/efi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/efi.h b/include/linux/efi.h index 72e76ec54641..ccbc35479684 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -61,7 +61,7 @@ typedef void *efi_handle_t; /* * The UEFI spec and EDK2 reference implementation both define EFI_GUID as - * struct { u32 a; u16; b; u16 c; u8 d[8]; }; and so the implied alignment + * struct { u32 a; u16 b; u16 c; u8 d[8]; }; and so the implied alignment * is 32 bits not 8 bits like our guid_t. In some cases (i.e., on 32-bit ARM), * this means that firmware services invoked by the kernel may assume that * efi_guid_t* arguments are 32-bit aligned, and use memory accessors that -- cgit v1.2.3 From d8809f6931065cbbf3554647a50a65a471ab5983 Mon Sep 17 00:00:00 2001 From: Marius Hoch Date: Sun, 17 May 2026 21:23:40 +0200 Subject: efi: sysfb_efi: Extend quirk to cover IdeaPad Duet 3 10IGL5-LTE The LTE enabled version of the IdeaPad Duet 3 10IGL5 needs the same quirk as the non-LTE version. As these are the only two IdeaPad Duet 3 10IGL5 versions, we can safely use non exact matching. Tested on a IdeaPad Duet 3 10IGL5-LTE. Signed-off-by: Marius Hoch Signed-off-by: Ard Biesheuvel --- drivers/firmware/efi/sysfb_efi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/efi/sysfb_efi.c b/drivers/firmware/efi/sysfb_efi.c index 4c3986ddcd54..685283bb7327 100644 --- a/drivers/firmware/efi/sysfb_efi.c +++ b/drivers/firmware/efi/sysfb_efi.c @@ -311,11 +311,14 @@ static const struct dmi_system_id efifb_dmi_swap_width_height[] __initconst = { .callback = efifb_swap_width_height, }, { - /* Lenovo IdeaPad Duet 3 10IGL5 with 1200x1920 portrait screen */ + /* + * Lenovo IdeaPad Duet 3 10IGL5 and 10IGL5-LTE with + * 1200x1920 portrait screen + */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, - "IdeaPad Duet 3 10IGL5"), + /* Non exact match to also match the LTE version */ + DMI_MATCH(DMI_PRODUCT_VERSION, "IdeaPad Duet 3 10IGL5"), }, .callback = efifb_swap_width_height, }, -- cgit v1.2.3 From 00907da2126ed785451b2a2f0fef282246dad104 Mon Sep 17 00:00:00 2001 From: Niranjana Vishwanathapura Date: Mon, 18 May 2026 12:16:40 -0700 Subject: drm/xe/multi_queue: Fix secondary queue error case MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If xe_lrc_create() fails, the secondary queue added to the multi-queue group list is not removed before freeing the queue. Fix error path handling for secondary queues by removing it from the multi-queue group list at the right place. Reported-by: Sebastian Österlund Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/7979 Fixes: d716a5088c88 ("drm/xe/multi_queue: Handle tearing down of a multi queue") Cc: stable@vger.kernel.org # v7.0+ Signed-off-by: Niranjana Vishwanathapura Reviewed-by: Matthew Auld Link: https://patch.msgid.link/20260518191639.320890-2-niranjana.vishwanathapura@intel.com (cherry picked from commit d2d23c12789cf69eddc35b8d38cd8eaabd0168f1) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_guc_submit.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_guc_submit.c b/drivers/gpu/drm/xe/xe_guc_submit.c index 10556156eaad..912182dc7704 100644 --- a/drivers/gpu/drm/xe/xe_guc_submit.c +++ b/drivers/gpu/drm/xe/xe_guc_submit.c @@ -1673,6 +1673,14 @@ static void guc_exec_queue_fini(struct xe_exec_queue *q) struct xe_guc_exec_queue *ge = q->guc; struct xe_guc *guc = exec_queue_to_guc(q); + if (xe_exec_queue_is_multi_queue_secondary(q)) { + struct xe_exec_queue_group *group = q->multi_queue.group; + + mutex_lock(&group->list_lock); + list_del(&q->multi_queue.link); + mutex_unlock(&group->list_lock); + } + release_guc_id(guc, q); xe_sched_entity_fini(&ge->entity); xe_sched_fini(&ge->sched); @@ -1694,14 +1702,6 @@ static void __guc_exec_queue_destroy_async(struct work_struct *w) guard(xe_pm_runtime)(guc_to_xe(guc)); trace_xe_exec_queue_destroy(q); - if (xe_exec_queue_is_multi_queue_secondary(q)) { - struct xe_exec_queue_group *group = q->multi_queue.group; - - mutex_lock(&group->list_lock); - list_del(&q->multi_queue.link); - mutex_unlock(&group->list_lock); - } - /* Confirm no work left behind accessing device structures */ cancel_delayed_work_sync(&ge->sched.base.work_tdr); -- cgit v1.2.3 From 4d8690dace005a38e6dbde9ecce2da3ad85c7c41 Mon Sep 17 00:00:00 2001 From: Henrique Carvalho Date: Thu, 14 May 2026 20:18:25 -0300 Subject: smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked() Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields") refactored cifs code to change cifs_tcp_ses_lock for tc_lock around tc_count changes. There was missing lock around tc_count increment inside smb2_find_smb_sess_tcon_unlocked(). Cc: stable@vger.kernel.org Fixes: 96c4af418586 ("cifs: Fix locking usage for tcon fields") Reviewed-by: Shyam Prasad N Signed-off-by: Henrique Carvalho Signed-off-by: Steve French --- fs/smb/client/smb2transport.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/smb/client/smb2transport.c b/fs/smb/client/smb2transport.c index e8eeff9e50d6..1143ee52470a 100644 --- a/fs/smb/client/smb2transport.c +++ b/fs/smb/client/smb2transport.c @@ -169,7 +169,9 @@ smb2_find_smb_sess_tcon_unlocked(struct cifs_ses *ses, __u32 tid) list_for_each_entry(tcon, &ses->tcon_list, tcon_list) { if (tcon->tid != tid) continue; + spin_lock(&tcon->tc_lock); ++tcon->tc_count; + spin_unlock(&tcon->tc_lock); trace_smb3_tcon_ref(tcon->debug_id, tcon->tc_count, netfs_trace_tcon_ref_get_find_sess_tcon); return tcon; -- cgit v1.2.3 From 3da1fdf4efbc490041eb4f836bf596201203f8f2 Mon Sep 17 00:00:00 2001 From: Asim Viladi Oglu Manizada Date: Sat, 16 May 2026 21:15:39 +0000 Subject: smb: client: reject userspace cifs.spnego descriptions cifs.spnego key descriptions contain authority-bearing fields such as pid, uid, creduid, and upcall_target that cifs.upcall treats as kernel-originating inputs. However, userspace can also create keys of this type through request_key(2) or add_key(2), allowing those fields to be supplied without CIFS origin. Only accept cifs.spnego descriptions while CIFS is using its private spnego_cred to request the key. Fixes: f1d662a7d5e5 ("[CIFS] Add upcall files for cifs to use spnego/kerberos") Assisted-by: avom-custom-harness:gpt-5.5-qwen3.6-mod-mix Reviewed-by: David Howells Signed-off-by: Asim Viladi Oglu Manizada Signed-off-by: Steve French --- fs/smb/client/cifs_spnego.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/fs/smb/client/cifs_spnego.c b/fs/smb/client/cifs_spnego.c index 3a41bbada04c..44c407275680 100644 --- a/fs/smb/client/cifs_spnego.c +++ b/fs/smb/client/cifs_spnego.c @@ -8,6 +8,7 @@ */ #include +#include #include #include #include @@ -40,12 +41,27 @@ cifs_spnego_key_destroy(struct key *key) kfree(key->payload.data[0]); } +static int +cifs_spnego_key_vet_description(const char *description) +{ + /* + * cifs.spnego descriptions are authority-bearing inputs to cifs.upcall. + * They are only valid when produced by CIFS while using the private + * spnego_cred installed below. Do not let userspace create this type + * of key through request_key(2)/add_key(2), since the helper treats + * pid/uid/creduid/upcall_target as kernel-originating fields. + */ + if (current_cred() != spnego_cred) + return -EPERM; + return 0; +} /* * keytype for CIFS spnego keys */ struct key_type cifs_spnego_key_type = { .name = "cifs.spnego", + .vet_description = cifs_spnego_key_vet_description, .instantiate = cifs_spnego_key_instantiate, .destroy = cifs_spnego_key_destroy, .describe = user_describe, -- cgit v1.2.3 From 457b046b7dfc0fd5b3437766a4ec43d16d02482c Mon Sep 17 00:00:00 2001 From: Lizhi Hou Date: Mon, 18 May 2026 08:57:05 -0700 Subject: accel/amdxdna: Remove mmap and export support for ubuf MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Ubuf pages should not be mmaped or exported. Remove the ubuf mmap callback and return -EOPNOTSUPP when exporting ubuf objects. ubuf vmap is also removed for there is not a real use case yet. Fixes: bd72d4acda10 ("accel/amdxdna: Support user space allocated buffer") Reviewed-by: Christian König Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Lizhi Hou Link: https://patch.msgid.link/20260518155706.937461-1-lizhi.hou@amd.com --- drivers/accel/amdxdna/amdxdna_gem.c | 9 ++++++- drivers/accel/amdxdna/amdxdna_gem.h | 2 ++ drivers/accel/amdxdna/amdxdna_ubuf.c | 50 ------------------------------------ 3 files changed, 10 insertions(+), 51 deletions(-) diff --git a/drivers/accel/amdxdna/amdxdna_gem.c b/drivers/accel/amdxdna/amdxdna_gem.c index 238ee244d4a6..6e367ddb9e1b 100644 --- a/drivers/accel/amdxdna/amdxdna_gem.c +++ b/drivers/accel/amdxdna/amdxdna_gem.c @@ -490,6 +490,9 @@ static struct dma_buf *amdxdna_gem_prime_export(struct drm_gem_object *gobj, int struct amdxdna_gem_obj *abo = to_xdna_obj(gobj); DEFINE_DMA_BUF_EXPORT_INFO(exp_info); + if (abo->private_buffer) + return ERR_PTR(-EOPNOTSUPP); + if (abo->dma_buf) { get_dma_buf(abo->dma_buf); return abo->dma_buf; @@ -685,6 +688,7 @@ amdxdna_gem_create_ubuf_object(struct drm_device *dev, struct amdxdna_drm_create { struct amdxdna_dev *xdna = to_xdna_dev(dev); struct amdxdna_drm_va_tbl va_tbl; + struct amdxdna_gem_obj *abo; struct drm_gem_object *gobj; struct dma_buf *dma_buf; @@ -711,7 +715,10 @@ amdxdna_gem_create_ubuf_object(struct drm_device *dev, struct amdxdna_drm_create dma_buf_put(dma_buf); - return to_xdna_obj(gobj); + abo = to_xdna_obj(gobj); + abo->private_buffer = true; + + return abo; } struct drm_gem_object * diff --git a/drivers/accel/amdxdna/amdxdna_gem.h b/drivers/accel/amdxdna/amdxdna_gem.h index 4fc48a1189d2..957305ccb485 100644 --- a/drivers/accel/amdxdna/amdxdna_gem.h +++ b/drivers/accel/amdxdna/amdxdna_gem.h @@ -54,6 +54,8 @@ struct amdxdna_gem_obj { /* True, if BO is managed by XRT, not application */ bool internal; + /* True, if BO is not exportable */ + bool private_buffer; }; #define to_gobj(obj) (&(obj)->base.base) diff --git a/drivers/accel/amdxdna/amdxdna_ubuf.c b/drivers/accel/amdxdna/amdxdna_ubuf.c index fb999aa25318..85390e3cc9f9 100644 --- a/drivers/accel/amdxdna/amdxdna_ubuf.c +++ b/drivers/accel/amdxdna/amdxdna_ubuf.c @@ -69,60 +69,10 @@ static void amdxdna_ubuf_release(struct dma_buf *dbuf) kfree(ubuf); } -static vm_fault_t amdxdna_ubuf_vm_fault(struct vm_fault *vmf) -{ - struct vm_area_struct *vma = vmf->vma; - struct amdxdna_ubuf_priv *ubuf; - unsigned long pfn; - pgoff_t pgoff; - - ubuf = vma->vm_private_data; - pgoff = (vmf->address - vma->vm_start) >> PAGE_SHIFT; - - pfn = page_to_pfn(ubuf->pages[pgoff]); - return vmf_insert_pfn(vma, vmf->address, pfn); -} - -static const struct vm_operations_struct amdxdna_ubuf_vm_ops = { - .fault = amdxdna_ubuf_vm_fault, -}; - -static int amdxdna_ubuf_mmap(struct dma_buf *dbuf, struct vm_area_struct *vma) -{ - struct amdxdna_ubuf_priv *ubuf = dbuf->priv; - - vma->vm_ops = &amdxdna_ubuf_vm_ops; - vma->vm_private_data = ubuf; - vm_flags_set(vma, VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP); - - return 0; -} - -static int amdxdna_ubuf_vmap(struct dma_buf *dbuf, struct iosys_map *map) -{ - struct amdxdna_ubuf_priv *ubuf = dbuf->priv; - void *kva; - - kva = vmap(ubuf->pages, ubuf->nr_pages, VM_MAP, PAGE_KERNEL); - if (!kva) - return -EINVAL; - - iosys_map_set_vaddr(map, kva); - return 0; -} - -static void amdxdna_ubuf_vunmap(struct dma_buf *dbuf, struct iosys_map *map) -{ - vunmap(map->vaddr); -} - static const struct dma_buf_ops amdxdna_ubuf_dmabuf_ops = { .map_dma_buf = amdxdna_ubuf_map, .unmap_dma_buf = amdxdna_ubuf_unmap, .release = amdxdna_ubuf_release, - .mmap = amdxdna_ubuf_mmap, - .vmap = amdxdna_ubuf_vmap, - .vunmap = amdxdna_ubuf_vunmap, }; struct dma_buf *amdxdna_get_ubuf(struct drm_device *dev, -- cgit v1.2.3 From eb359cc314365f50272883805adfe96b1e4ecefc Mon Sep 17 00:00:00 2001 From: Sunil Khatri Date: Fri, 8 May 2026 12:21:20 +0530 Subject: drm/amdgpu/userq: use drm_exec in amdgpu_userq_fence_read_wptr MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To access the bo from vm mapping first lock the root bo and then the object bo of the mapping to make sure both locks are taken safely. Signed-off-by: Sunil Khatri Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 3aab50410653fe7eb35eb6f9c2b27e3549ab09e6) --- drivers/gpu/drm/amd/amdgpu/amdgpu_userq_fence.c | 55 ++++++++++++------------- 1 file changed, 26 insertions(+), 29 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq_fence.c index 53a8944bab05..a41fb72dba94 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq_fence.c @@ -370,51 +370,48 @@ static int amdgpu_userq_fence_read_wptr(struct amdgpu_device *adev, { struct amdgpu_bo_va_mapping *mapping; struct amdgpu_bo *bo; + struct drm_exec exec; u64 addr, *ptr; - int r; - - r = amdgpu_bo_reserve(queue->vm->root.bo, false); - if (r) - return r; + int ret; addr = queue->userq_prop->wptr_gpu_addr; addr &= AMDGPU_GMC_HOLE_MASK; - mapping = amdgpu_vm_bo_lookup_mapping(queue->vm, addr >> PAGE_SHIFT); - if (!mapping) { - amdgpu_bo_unreserve(queue->vm->root.bo); - DRM_ERROR("Failed to lookup amdgpu_bo_va_mapping\n"); - return -EINVAL; - } + drm_exec_init(&exec, DRM_EXEC_IGNORE_DUPLICATES, 2); + drm_exec_until_all_locked(&exec) { + ret = amdgpu_vm_lock_pd(queue->vm, &exec, 1); + drm_exec_retry_on_contention(&exec); + if (unlikely(ret)) + goto lock_error; - bo = amdgpu_bo_ref(mapping->bo_va->base.bo); - amdgpu_bo_unreserve(queue->vm->root.bo); - r = amdgpu_bo_reserve(bo, true); - if (r) { - amdgpu_bo_unref(&bo); - DRM_ERROR("Failed to reserve userqueue wptr bo"); - return r; + mapping = amdgpu_vm_bo_lookup_mapping(queue->vm, addr >> PAGE_SHIFT); + if (!mapping) { + ret = -EINVAL; + goto lock_error; + } + + ret = drm_exec_lock_obj(&exec, &mapping->bo_va->base.bo->tbo.base); + drm_exec_retry_on_contention(&exec); + if (unlikely(ret)) + goto lock_error; } - r = amdgpu_bo_kmap(bo, (void **)&ptr); - if (r) { + bo = mapping->bo_va->base.bo; + ret = amdgpu_bo_kmap(bo, (void **)&ptr); + if (ret) { DRM_ERROR("Failed mapping the userqueue wptr bo"); - goto map_error; + goto lock_error; } *wptr = le64_to_cpu(*ptr); amdgpu_bo_kunmap(bo); - amdgpu_bo_unreserve(bo); - amdgpu_bo_unref(&bo); - + drm_exec_fini(&exec); return 0; -map_error: - amdgpu_bo_unreserve(bo); - amdgpu_bo_unref(&bo); - - return r; +lock_error: + drm_exec_fini(&exec); + return ret; } static void -- cgit v1.2.3 From be045c5c8305fca1214ebdd4b8433ac80635339b Mon Sep 17 00:00:00 2001 From: Sunil Khatri Date: Fri, 8 May 2026 15:58:09 +0530 Subject: drm/amdgpu/userq: pin mqd and fw object bo to avoid eviction MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit mqd and fw objects are queue core objects which should remain valid and never be unmapped and evicted for user queues to work properly. During eviction if these buffers are evicted the hw continue to use the invalid addresses and caused page faults and system hung. Signed-off-by: Sunil Khatri Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit a3bbf32a336939a1d21b9561f8e53333b684b7ef) --- drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c index 70d74f04d2dd..8841955927bb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c @@ -504,16 +504,20 @@ int amdgpu_userq_create_object(struct amdgpu_userq_mgr *uq_mgr, goto free_obj; } + r = amdgpu_bo_pin(userq_obj->obj, AMDGPU_GEM_DOMAIN_GTT); + if (r) + goto unresv; + r = amdgpu_ttm_alloc_gart(&(userq_obj->obj)->tbo); if (r) { drm_file_err(uq_mgr->file, "Failed to alloc GART for userqueue object (%d)", r); - goto unresv; + goto unpin_bo; } r = amdgpu_bo_kmap(userq_obj->obj, &userq_obj->cpu_ptr); if (r) { drm_file_err(uq_mgr->file, "Failed to map BO for userqueue (%d)", r); - goto unresv; + goto unpin_bo; } userq_obj->gpu_addr = amdgpu_bo_gpu_offset(userq_obj->obj); @@ -521,11 +525,13 @@ int amdgpu_userq_create_object(struct amdgpu_userq_mgr *uq_mgr, memset(userq_obj->cpu_ptr, 0, size); return 0; +unpin_bo: + amdgpu_bo_unpin(userq_obj->obj); unresv: amdgpu_bo_unreserve(userq_obj->obj); - free_obj: amdgpu_bo_unref(&userq_obj->obj); + return r; } @@ -533,6 +539,7 @@ void amdgpu_userq_destroy_object(struct amdgpu_userq_mgr *uq_mgr, struct amdgpu_userq_obj *userq_obj) { amdgpu_bo_kunmap(userq_obj->obj); + amdgpu_bo_unpin(userq_obj->obj); amdgpu_bo_unref(&userq_obj->obj); } -- cgit v1.2.3 From c8ed2de0f2ee842d108ef96c125e931ea82b453c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Tue, 21 Apr 2026 12:39:54 +0200 Subject: drm/amdgpu: rework userq reset work handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It is illegal to schedule reset work from another reset work! Fix this by scheduling the userq reset work directly on the work queue of the reset domain. Not fully tested, I leave that to the IGT test cases. Signed-off-by: Christian König Reviewed-by: Prike Liang Reviewed-by: Sunil Khatri Signed-off-by: Alex Deucher (cherry picked from commit fd9200ccefab94f27877d1943761d6b0ccbd89c8) --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 - drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +- drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c | 84 ++++++++++++++++-------------- drivers/gpu/drm/amd/amdgpu/amdgpu_userq.h | 16 +++++- 4 files changed, 60 insertions(+), 44 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 8bc591deb546..fd50da4c7b18 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -1190,7 +1190,6 @@ struct amdgpu_device { bool apu_prefer_gtt; bool userq_halt_for_enforce_isolation; - struct work_struct userq_reset_work; struct amdgpu_uid *uid_info; struct amdgpu_uma_carveout_info uma_info; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 66ca043658ff..1424c98d2006 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -3787,7 +3787,6 @@ int amdgpu_device_init(struct amdgpu_device *adev, } INIT_WORK(&adev->xgmi_reset_work, amdgpu_device_xgmi_reset_func); - INIT_WORK(&adev->userq_reset_work, amdgpu_userq_reset_work); amdgpu_coredump_init(adev); @@ -5478,7 +5477,7 @@ static inline void amdgpu_device_stop_pending_resets(struct amdgpu_device *adev) if (!amdgpu_sriov_vf(adev)) cancel_work(&adev->reset_work); #endif - cancel_work(&adev->userq_reset_work); + amdgpu_userq_mgr_cancel_reset_work(adev); if (adev->kfd.dev) cancel_work(&adev->kfd.reset_work); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c index 8841955927bb..aa6d4c71fba6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c @@ -82,19 +82,11 @@ static bool amdgpu_userq_is_reset_type_supported(struct amdgpu_device *adev, return false; } -static void amdgpu_userq_gpu_reset(struct amdgpu_device *adev) -{ - if (amdgpu_device_should_recover_gpu(adev)) { - amdgpu_reset_domain_schedule(adev->reset_domain, - &adev->userq_reset_work); - /* Wait for the reset job to complete */ - flush_work(&adev->userq_reset_work); - } -} - -static int -amdgpu_userq_detect_and_reset_queues(struct amdgpu_userq_mgr *uq_mgr) +static void amdgpu_userq_mgr_reset_work(struct work_struct *work) { + struct amdgpu_userq_mgr *uq_mgr = + container_of(work, struct amdgpu_userq_mgr, + reset_work); struct amdgpu_device *adev = uq_mgr->adev; const int queue_types[] = { AMDGPU_RING_TYPE_COMPUTE, @@ -103,12 +95,11 @@ amdgpu_userq_detect_and_reset_queues(struct amdgpu_userq_mgr *uq_mgr) }; const int num_queue_types = ARRAY_SIZE(queue_types); bool gpu_reset = false; - int r = 0; - int i; + int i, r; if (unlikely(adev->debug_disable_gpu_ring_reset)) { dev_err(adev->dev, "userq reset disabled by debug mask\n"); - return 0; + return; } /* @@ -116,7 +107,7 @@ amdgpu_userq_detect_and_reset_queues(struct amdgpu_userq_mgr *uq_mgr) * skip all reset detection logic */ if (!amdgpu_gpu_recovery) - return 0; + return; /* * Iterate through all queue types to detect and reset problematic queues @@ -141,10 +132,19 @@ amdgpu_userq_detect_and_reset_queues(struct amdgpu_userq_mgr *uq_mgr) } } - if (gpu_reset) - amdgpu_userq_gpu_reset(adev); + if (gpu_reset) { + struct amdgpu_reset_context reset_context; - return r; + memset(&reset_context, 0, sizeof(reset_context)); + + reset_context.method = AMD_RESET_METHOD_NONE; + reset_context.reset_req_dev = adev; + reset_context.src = AMDGPU_RESET_SRC_USERQ; + set_bit(AMDGPU_NEED_FULL_RESET, &reset_context.flags); + /*set_bit(AMDGPU_SKIP_COREDUMP, &reset_context.flags);*/ + + amdgpu_device_gpu_recover(adev, NULL, &reset_context); + } } static void amdgpu_userq_hang_detect_work(struct work_struct *work) @@ -153,7 +153,11 @@ static void amdgpu_userq_hang_detect_work(struct work_struct *work) container_of(work, struct amdgpu_usermode_queue, hang_detect_work.work); - amdgpu_userq_detect_and_reset_queues(queue->userq_mgr); + /* + * Don't schedule the work here! Scheduling or queue work from one reset + * handler to another is illegal if you don't take extra precautions! + */ + amdgpu_userq_mgr_reset_work(&queue->userq_mgr->reset_work); } /* @@ -182,8 +186,8 @@ void amdgpu_userq_start_hang_detect_work(struct amdgpu_usermode_queue *queue) break; } - schedule_delayed_work(&queue->hang_detect_work, - msecs_to_jiffies(timeout_ms)); + queue_delayed_work(adev->reset_domain->wq, &queue->hang_detect_work, + msecs_to_jiffies(timeout_ms)); } void amdgpu_userq_process_fence_irq(struct amdgpu_device *adev, u32 doorbell) @@ -1259,28 +1263,13 @@ amdgpu_userq_evict_all(struct amdgpu_userq_mgr *uq_mgr) if (ret) { drm_file_err(uq_mgr->file, "Couldn't unmap all the queues, eviction failed ret=%d\n", ret); - amdgpu_userq_detect_and_reset_queues(uq_mgr); + amdgpu_reset_domain_schedule(uq_mgr->adev->reset_domain, + &uq_mgr->reset_work); + flush_work(&uq_mgr->reset_work); } return ret; } -void amdgpu_userq_reset_work(struct work_struct *work) -{ - struct amdgpu_device *adev = container_of(work, struct amdgpu_device, - userq_reset_work); - struct amdgpu_reset_context reset_context; - - memset(&reset_context, 0, sizeof(reset_context)); - - reset_context.method = AMD_RESET_METHOD_NONE; - reset_context.reset_req_dev = adev; - reset_context.src = AMDGPU_RESET_SRC_USERQ; - set_bit(AMDGPU_NEED_FULL_RESET, &reset_context.flags); - /*set_bit(AMDGPU_SKIP_COREDUMP, &reset_context.flags);*/ - - amdgpu_device_gpu_recover(adev, NULL, &reset_context); -} - static void amdgpu_userq_wait_for_signal(struct amdgpu_userq_mgr *uq_mgr) { @@ -1314,9 +1303,24 @@ int amdgpu_userq_mgr_init(struct amdgpu_userq_mgr *userq_mgr, struct drm_file *f userq_mgr->file = file_priv; INIT_DELAYED_WORK(&userq_mgr->resume_work, amdgpu_userq_restore_worker); + INIT_WORK(&userq_mgr->reset_work, amdgpu_userq_mgr_reset_work); return 0; } +void amdgpu_userq_mgr_cancel_reset_work(struct amdgpu_device *adev) +{ + struct xarray *xa = &adev->userq_doorbell_xa; + struct amdgpu_usermode_queue *queue; + unsigned long flags, queue_id; + + xa_lock_irqsave(xa, flags); + xa_for_each(xa, queue_id, queue) { + cancel_delayed_work(&queue->hang_detect_work); + cancel_work(&queue->userq_mgr->reset_work); + } + xa_unlock_irqrestore(xa, flags); +} + void amdgpu_userq_mgr_cancel_resume(struct amdgpu_userq_mgr *userq_mgr) { cancel_delayed_work_sync(&userq_mgr->resume_work); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.h index 85f460e7c31b..49b33e2d6932 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.h @@ -84,7 +84,13 @@ struct amdgpu_usermode_queue { u32 xcp_id; int priority; struct dentry *debugfs_queue; - struct delayed_work hang_detect_work; + + /** + * @hang_detect_work: + * + * Delayed work which runs when userq_fences time out. + */ + struct delayed_work hang_detect_work; struct kref refcount; struct list_head userq_va_list; @@ -116,6 +122,13 @@ struct amdgpu_userq_mgr { struct amdgpu_device *adev; struct delayed_work resume_work; struct drm_file *file; + + /** + * @reset_work: + * + * Reset work which is used when eviction fails. + */ + struct work_struct reset_work; atomic_t userq_count[AMDGPU_RING_TYPE_MAX]; }; @@ -134,6 +147,7 @@ int amdgpu_userq_ioctl(struct drm_device *dev, void *data, struct drm_file *filp int amdgpu_userq_mgr_init(struct amdgpu_userq_mgr *userq_mgr, struct drm_file *file_priv, struct amdgpu_device *adev); +void amdgpu_userq_mgr_cancel_reset_work(struct amdgpu_device *adev); void amdgpu_userq_mgr_cancel_resume(struct amdgpu_userq_mgr *userq_mgr); void amdgpu_userq_mgr_fini(struct amdgpu_userq_mgr *userq_mgr); -- cgit v1.2.3 From 291df3dc7d10855c26841b8f42843bc996d097cf Mon Sep 17 00:00:00 2001 From: Sunil Khatri Date: Tue, 12 May 2026 14:52:40 +0530 Subject: drm/amdgpu/userq: cancel reset work while tear down in progress MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit While tear down of a userq_mgr is happening when all the queues are free we should cancel any reset work if pending before exiting. Signed-off-by: Sunil Khatri Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 160164609f71f774c4f661227a9b7a370a86b112) --- drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c index aa6d4c71fba6..49e9c75d3151 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c @@ -1346,6 +1346,14 @@ void amdgpu_userq_mgr_fini(struct amdgpu_userq_mgr *userq_mgr) } xa_destroy(&userq_mgr->userq_xa); + + /* + * Drain any in-flight reset_work. By this point all queues are freed + * and userq_count is 0, so if reset_work starts now it exits early. + * We still need to wait in case it was already executing gpu_recover. + */ + cancel_work_sync(&userq_mgr->reset_work); + mutex_destroy(&userq_mgr->userq_mutex); } -- cgit v1.2.3 From 0be97436bf249503b2c5898e7459744962b70f15 Mon Sep 17 00:00:00 2001 From: Sunil Khatri Date: Tue, 12 May 2026 16:00:18 +0530 Subject: drm/amdgpu/userq: update the vm task info during signal ioctl MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pagefaults does not have process information correctly populated as vm->task is not set during vm_init but should be updated while real submission. So setting that up during signal_ioctl to get the correct submission process details. Signed-off-by: Sunil Khatri Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit a9b14d88b4d83e21ab965f23d1fb7b07b87e0517) --- drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c index 49e9c75d3151..f79e54e0a04a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c @@ -802,6 +802,9 @@ amdgpu_userq_create(struct drm_file *filp, union drm_amdgpu_userq *args) goto clean_fence_driver; } + /* Update VM owner at userq submit-time for page-fault attribution. */ + amdgpu_vm_set_task_info(&fpriv->vm); + amdgpu_userq_ensure_ev_fence(&fpriv->userq_mgr, &fpriv->evf_mgr); /* don't map the queue if scheduling is halted */ -- cgit v1.2.3 From b6074630a461b1322a814988779005cbc43612ea Mon Sep 17 00:00:00 2001 From: Alan Liu Date: Fri, 1 May 2026 12:35:48 +0800 Subject: drm/amdgpu/vpe: Force collaborate sync after TRAP VPE1 could possibly hang and fail to power off at the end of commands in collaboration mode. This workaround adds a COLLAB_SYNC after TRAP to force instances synchronized to avoid VPE1 fail to power off. Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Alan liu Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5171 Signed-off-by: Alex Deucher (cherry picked from commit a8b749c5c5afb7e5daa2bfb95d958fb3c6b8f055) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c index fd881388d612..f27f917e3cdb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vpe.c @@ -562,6 +562,11 @@ static void vpe_ring_emit_fence(struct amdgpu_ring *ring, uint64_t addr, amdgpu_ring_write(ring, 0); } + /* WA: Force sync after TRAP to avoid VPE1 fail to power off */ + if (ring->adev->vpe.collaborate_mode) { + amdgpu_ring_write(ring, VPE_CMD_HEADER(VPE_CMD_OPCODE_COLLAB_SYNC, 0)); + amdgpu_ring_write(ring, 0xabcd); + } } static void vpe_ring_emit_pipeline_sync(struct amdgpu_ring *ring) @@ -968,7 +973,7 @@ static const struct amdgpu_ring_funcs vpe_ring_funcs = { .emit_frame_size = 5 + /* vpe_ring_init_cond_exec */ 6 + /* vpe_ring_emit_pipeline_sync */ - 10 + 10 + 10 + /* vpe_ring_emit_fence */ + 12 + 12 + 12 + /* vpe_ring_emit_fence */ /* vpe_ring_emit_vm_flush */ SOC15_FLUSH_GPU_TLB_NUM_WREG * 3 + SOC15_FLUSH_GPU_TLB_NUM_REG_WAIT * 6, -- cgit v1.2.3 From 2c34c7b88ba4f04b3a862fac879bfd8567f06541 Mon Sep 17 00:00:00 2001 From: Amir Shetaia Date: Thu, 7 May 2026 13:24:55 -0400 Subject: drm/amdgpu: reject non-user addresses early in GEM_USERPTR ioctl amdgpu_gem_userptr_ioctl() currently accepts any value of args->addr and only discovers an out-of-range pointer much later, inside amdgpu_gem_object_create() and the HMM mirror registration path. Userspace can drive that path with kernel-side virtual addresses; the get_user_pages() layer rejects them, but only after the driver has already allocated a GEM object and started wiring up notifier state that then has to be torn down on failure. Add an access_ok() guard at the top of the ioctl, right after the existing page-alignment check and before flag validation, so any address that does not lie within the calling task's user address range is rejected with -EFAULT before any allocation occurs. No legitimate ROCm/HSA userspace passes kernel-mode pointers through this interface, so this is defense-in-depth rather than a behaviour change for valid callers; -EFAULT matches the convention already used by other uaccess-style rejections in the kernel. Also add an explicit #include ; access_ok() is otherwise only available transitively through other headers in this translation unit. Signed-off-by: Amir Shetaia Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher (cherry picked from commit 7a076df36397d780d7e4fb595287b4980451a7f5) --- drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c index 5376035d32fe..23f2304ee7e0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -508,6 +509,9 @@ int amdgpu_gem_userptr_ioctl(struct drm_device *dev, void *data, if (offset_in_page(args->addr | args->size)) return -EINVAL; + if (!access_ok((void __user *)(uintptr_t)args->addr, args->size)) + return -EFAULT; + /* reject unknown flag values */ if (args->flags & ~(AMDGPU_GEM_USERPTR_READONLY | AMDGPU_GEM_USERPTR_ANONONLY | AMDGPU_GEM_USERPTR_VALIDATE | -- cgit v1.2.3 From d892a6eca7a847dd57ede6e55d7494a01b43fa5f Mon Sep 17 00:00:00 2001 From: Sunil Khatri Date: Tue, 12 May 2026 22:29:48 +0530 Subject: drm/amdgpu: remove va cursors for all mappings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit va_cursor struct needs to be cleaned even if the mapping has been removed already. Also simplify it by make it a void function as return value check isn't needed as its called during tear down. Signed-off-by: Sunil Khatri Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 4d35a45c9b4c1ac5b6e3219f83c3db706b675fa2) --- drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c index f79e54e0a04a..6111f6858d2d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c @@ -303,13 +303,14 @@ static bool amdgpu_userq_buffer_vas_mapped(struct amdgpu_usermode_queue *queue) static void amdgpu_userq_buffer_va_list_del(struct amdgpu_bo_va_mapping *mapping, struct amdgpu_userq_va_cursor *va_cursor) { - atomic_set(&mapping->bo_va->userq_va_mapped, 0); + if (mapping) + atomic_set(&mapping->bo_va->userq_va_mapped, 0); list_del(&va_cursor->list); kfree(va_cursor); } -static int amdgpu_userq_buffer_vas_list_cleanup(struct amdgpu_device *adev, - struct amdgpu_usermode_queue *queue) +static void amdgpu_userq_buffer_vas_list_cleanup(struct amdgpu_device *adev, + struct amdgpu_usermode_queue *queue) { struct amdgpu_userq_va_cursor *va_cursor, *tmp; struct amdgpu_bo_va_mapping *mapping; @@ -319,15 +320,11 @@ static int amdgpu_userq_buffer_vas_list_cleanup(struct amdgpu_device *adev, list_for_each_entry_safe(va_cursor, tmp, &queue->userq_va_list, list) { mapping = amdgpu_vm_bo_lookup_mapping(queue->vm, va_cursor->gpu_addr); - if (!mapping) { - return -EINVAL; - } - dev_dbg(adev->dev, "delete the userq:%p va:%llx\n", - queue, va_cursor->gpu_addr); + if (mapping) + dev_dbg(adev->dev, "delete the userq:%p va:%llx\n", + queue, va_cursor->gpu_addr); amdgpu_userq_buffer_va_list_del(mapping, va_cursor); } - - return 0; } static int amdgpu_userq_preempt_helper(struct amdgpu_usermode_queue *queue) -- cgit v1.2.3 From 9baf02bf88a8228248c546a3be7bbe3bfe74b7d5 Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Tue, 12 May 2026 20:29:52 +0530 Subject: drm/amdgpu: Fix discovery offset check under VF Discovery table may be kept at offset 0 by host driver. Remove the validation check. Fixes: 01bdc7e219c4 ("drm/amdgpu: New interface to get IP discovery binary v3") Signed-off-by: Lijo Lazar Reviewed-by: Ellen Pan Signed-off-by: Alex Deucher (cherry picked from commit d3f5bbd007133c64a20e81ef290a93e46c75df40) --- drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c index 8d99bfaa498f..80efeca0ab73 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c @@ -304,7 +304,7 @@ static int amdgpu_discovery_get_tmr_info(struct amdgpu_device *adev, adev->virt.crit_regn_tbl[AMD_SRIOV_MSG_IPD_TABLE_ID].offset; adev->discovery.size = adev->virt.crit_regn_tbl[AMD_SRIOV_MSG_IPD_TABLE_ID].size_kb << 10; - if (!adev->discovery.offset || !adev->discovery.size) + if (!adev->discovery.size) return -EINVAL; } else { goto out; -- cgit v1.2.3 From d796558def777f9a9cc274861e06b8b61851b409 Mon Sep 17 00:00:00 2001 From: Yang Wang Date: Sat, 9 May 2026 15:20:39 +0800 Subject: drm/amd/pm: fix memleak of dpm_policies on smu v15 In smu_v15_0_fini_smc_tables, dpm_policies was not freed or NULLed, causing a memory leak. Add kfree() and NULL assignment to properly release memory and avoid dangling pointers. Fixes: 2beedc3a92b7 ("drm/amd/pm: Add initial support for smu v15_0_8"); Signed-off-by: Yang Wang Reviewed-by: Asad Kamal Signed-off-by: Alex Deucher (cherry picked from commit 014f329074f688b9b49383e8b70e79e9ef99359e) --- drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0.c index c3cb36813806..940b43105817 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu15/smu_v15_0.c @@ -435,10 +435,12 @@ int smu_v15_0_fini_smc_tables(struct smu_context *smu) smu_table->watermarks_table = NULL; smu_table->metrics_time = 0; + kfree(smu_dpm->dpm_policies); kfree(smu_dpm->dpm_context); kfree(smu_dpm->golden_dpm_context); kfree(smu_dpm->dpm_current_power_state); kfree(smu_dpm->dpm_request_power_state); + smu_dpm->dpm_policies = NULL; smu_dpm->dpm_context = NULL; smu_dpm->golden_dpm_context = NULL; smu_dpm->dpm_context_size = 0; -- cgit v1.2.3 From 48b13bfbdf94e683cc5b8c5cb35b5af4221e657f Mon Sep 17 00:00:00 2001 From: Sunday Clement Date: Wed, 13 May 2026 11:22:19 -0400 Subject: drm/amdkfd: Fix OOB memory exposure in get_wave_state() The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and cp_hqd_cntl_stack_offset values read directly from the MQD, which are written by GPU microcode and fully attacker-controlled on the CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3). this leads to an unbounded copy_to_user() that can leak adjacent GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB read length, if size is set to 1 MiB against a 4 KiB allocation, we leak 1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR pointers). Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the clamped size before performing arithmetic and copy_to_user(). This ensures we never read beyond the allocated kernel BO regardless of attacker-supplied MQD field values. Signed-off-by: Sunday Clement Acked-by: Alex Deucher Signed-off-by: Alex Deucher (cherry picked from commit 7ef144458f48d5589e36f1b3d83e83db2e5c5ba5) --- drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c index e8f97de9d6e4..f6d9d81003dc 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v9.c @@ -364,11 +364,15 @@ static int get_wave_state(struct mqd_manager *mm, void *mqd, { struct v9_mqd *m; struct kfd_context_save_area_header header; + u32 cntl_stack_size; + u32 cntl_stack_offset; /* Control stack is located one page after MQD. */ void *mqd_ctl_stack = (void *)((uintptr_t)mqd + AMDGPU_GPU_PAGE_SIZE); m = get_mqd(mqd); + cntl_stack_size = min_t(u32, m->cp_hqd_cntl_stack_size, q->ctl_stack_size); + cntl_stack_offset = min_t(u32, m->cp_hqd_cntl_stack_offset, cntl_stack_size); *ctl_stack_used_size = m->cp_hqd_cntl_stack_size - m->cp_hqd_cntl_stack_offset; @@ -384,9 +388,10 @@ static int get_wave_state(struct mqd_manager *mm, void *mqd, if (copy_to_user(ctl_stack, &header, sizeof(header.wave_state))) return -EFAULT; - if (copy_to_user(ctl_stack + m->cp_hqd_cntl_stack_offset, - mqd_ctl_stack + m->cp_hqd_cntl_stack_offset, - *ctl_stack_used_size)) + *ctl_stack_used_size = cntl_stack_size - cntl_stack_offset; + + if (copy_to_user(ctl_stack + cntl_stack_offset, mqd_ctl_stack + cntl_stack_offset, + *ctl_stack_used_size)) return -EFAULT; return 0; -- cgit v1.2.3 From 4d798ea0712fddbd35b439cef32b8ac735eb76f9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Wed, 13 May 2026 22:04:08 +0200 Subject: drm/amdgpu: Align amdgpu_gtt_mgr entries to TLB size on Tahiti (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The TLB is organized in groups of 8 entries, each one is 4K. On Tahiti, the HW requires these GART entries to be 32K-aligned. This fixes a VCE 1 firmware validation failure that can happen after suspend/resume since we use amdgpu_gtt_mgr for VCE 1. v2: - Change variable declaration order - Add comment about "V bit HW bug" Fixes: 698fa62f56aa ("drm/amdgpu: Add helper to alloc GART entries") Signed-off-by: Timur Kristóf Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 530411b465ef0b2c0cc18c2e3d7e38422b1117d1) --- drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c index 620fddde4c4d..a5d26b943f6d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c @@ -199,11 +199,18 @@ int amdgpu_gtt_mgr_alloc_entries(struct amdgpu_gtt_mgr *mgr, enum drm_mm_insert_mode mode) { struct amdgpu_device *adev = container_of(mgr, typeof(*adev), mman.gtt_mgr); + u32 alignment = 0; int r; + /* Align to TLB L2 cache entry size to work around "V bit HW bug" */ + if (adev->asic_type == CHIP_TAHITI) { + alignment = 32 * 1024 / AMDGPU_GPU_PAGE_SIZE; + num_pages = ALIGN(num_pages, alignment); + } + spin_lock(&mgr->lock); r = drm_mm_insert_node_in_range(&mgr->mm, mm_node, num_pages, - 0, GART_ENTRY_WITHOUT_BO_COLOR, 0, + alignment, GART_ENTRY_WITHOUT_BO_COLOR, 0, adev->gmc.gart_size >> PAGE_SHIFT, mode); spin_unlock(&mgr->lock); -- cgit v1.2.3 From 9f907adb66d8369dd45412794a04845011503fa8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Wed, 13 May 2026 22:04:09 +0200 Subject: drm/amdgpu/vce1: Check that the GPU address is < 128 MiB MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When ensuring the low 32-bit address, make sure it is less than 128 MiB, otherwise the VCE seems to fail to initialize. This seems to be an undocumented limitation of the firmware validation mechanism. Note that in case of VCE1 the BAR address is zero and we can't change it also due to the firmware validator. When programming the mmVCE_VCPU_CACHE_OFFSETn registers, don't AND them with a mask. This is incorrect because the register mask is actually 0x0fffffff and useless because we already ensure the addresses are below the limit. Signed-off-by: Timur Kristóf Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit e729ae5f3ac73c861c062080ac8c3d666c972404) --- drivers/gpu/drm/amd/amdgpu/vce_v1_0.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c index 5b7b46d242c6..edabec442cb6 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c @@ -313,17 +313,17 @@ static int vce_v1_0_mc_resume(struct amdgpu_device *adev) offset = adev->vce.gpu_addr + AMDGPU_VCE_FIRMWARE_OFFSET; size = VCE_V1_0_FW_SIZE; - WREG32(mmVCE_VCPU_CACHE_OFFSET0, offset & 0x7fffffff); + WREG32(mmVCE_VCPU_CACHE_OFFSET0, offset); WREG32(mmVCE_VCPU_CACHE_SIZE0, size); offset += size; size = VCE_V1_0_STACK_SIZE; - WREG32(mmVCE_VCPU_CACHE_OFFSET1, offset & 0x7fffffff); + WREG32(mmVCE_VCPU_CACHE_OFFSET1, offset); WREG32(mmVCE_VCPU_CACHE_SIZE1, size); offset += size; size = VCE_V1_0_DATA_SIZE; - WREG32(mmVCE_VCPU_CACHE_OFFSET2, offset & 0x7fffffff); + WREG32(mmVCE_VCPU_CACHE_OFFSET2, offset); WREG32(mmVCE_VCPU_CACHE_SIZE2, size); WREG32_P(mmVCE_LMI_CTRL2, 0x0, ~0x100); @@ -527,11 +527,15 @@ static int vce_v1_0_early_init(struct amdgpu_ip_block *ip_block) * To accomodate that, we put GART to the LOW address range * and reserve some GART pages where we map the VCPU BO, * so that it gets a 32-bit address. + * + * The BAR address is zero and we can't change it + * due to the firmware validation mechanism. + * It seems that it fails to initialize if the address is >= 128 MiB. */ static int vce_v1_0_ensure_vcpu_bo_32bit_addr(struct amdgpu_device *adev) { u64 bo_size = amdgpu_bo_size(adev->vce.vcpu_bo); - u64 max_vcpu_bo_addr = 0xffffffff - bo_size; + u64 max_vcpu_bo_addr = 0x07ffffff - bo_size; u64 num_pages = ALIGN(bo_size, AMDGPU_GPU_PAGE_SIZE) / AMDGPU_GPU_PAGE_SIZE; u64 pa = amdgpu_gmc_vram_pa(adev, adev->vce.vcpu_bo); u64 flags = AMDGPU_PTE_READABLE | AMDGPU_PTE_WRITEABLE | AMDGPU_PTE_VALID; -- cgit v1.2.3 From d993851b6db9abf0840e8b100e33df232bcc879e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Wed, 13 May 2026 22:04:10 +0200 Subject: drm/amdgpu/vce1: Remove superfluous address check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The same thing is already checked a few lines above. Signed-off-by: Timur Kristóf Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit c1dc555e760dbfc4a4710f7270f525a03d433af8) --- drivers/gpu/drm/amd/amdgpu/vce_v1_0.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c index edabec442cb6..884f24be3685 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c @@ -557,8 +557,6 @@ static int vce_v1_0_ensure_vcpu_bo_32bit_addr(struct amdgpu_device *adev) amdgpu_gart_map_vram_range(adev, pa, adev->vce.gart_node.start, num_pages, flags, adev->gart.ptr); adev->vce.gpu_addr = adev->gmc.gart_start + vce_gart_start_offs; - if (adev->vce.gpu_addr > max_vcpu_bo_addr) - return -EINVAL; return 0; } -- cgit v1.2.3 From 12b60cf345e84aa7546dd225b3ce3380c9ab97f5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Wed, 13 May 2026 22:04:11 +0200 Subject: drm/amdgpu/vce1: Check if VRAM address is lower than GART. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Previously, I had assumed this was not possible so it was OK to not handle it, but now we got a report from a user who has a board that is configured this way. When the VCPU BO is already located in a low 32-bit address in VRAM (eg. when VRAM is mapped to the low address space), don't do the workaround. Fixes: 71aec08f80e7 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries") Signed-off-by: Timur Kristóf Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit f370ec9b164698a9ca1a7b59bfbea07f70df769d) --- drivers/gpu/drm/amd/amdgpu/vce_v1_0.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c index 884f24be3685..a49f11be74b2 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c @@ -542,6 +542,9 @@ static int vce_v1_0_ensure_vcpu_bo_32bit_addr(struct amdgpu_device *adev) u64 vce_gart_start_offs; int r; + if (adev->gmc.vram_start < adev->gmc.gart_start) + return amdgpu_bo_gpu_offset(adev->vce.vcpu_bo) <= max_vcpu_bo_addr ? 0 : -EINVAL; + r = amdgpu_gtt_mgr_alloc_entries(&adev->mman.gtt_mgr, &adev->vce.gart_node, num_pages, DRM_MM_INSERT_LOW); -- cgit v1.2.3 From 3ebcab11320588fd9bb17a26027dddce4419ae43 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Wed, 13 May 2026 22:04:12 +0200 Subject: drm/amdgpu/vce1: Don't repeat GTT MGR node allocation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only allocate entries from the GTT manager when the VCE GTT node is not allocated yet. This prevents the possibility of allocating them multiple times, which causes issues during GPU reset and suspend/resume. Fixes: 71aec08f80e7 ("amdgpu/vce: use amdgpu_gtt_mgr_alloc_entries") Signed-off-by: Timur Kristóf Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 8d2a20c1721cb17e22821e1b4ecbb02d475d91c5) --- drivers/gpu/drm/amd/amdgpu/vce_v1_0.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c index a49f11be74b2..92c3cf3fce4f 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c @@ -545,11 +545,13 @@ static int vce_v1_0_ensure_vcpu_bo_32bit_addr(struct amdgpu_device *adev) if (adev->gmc.vram_start < adev->gmc.gart_start) return amdgpu_bo_gpu_offset(adev->vce.vcpu_bo) <= max_vcpu_bo_addr ? 0 : -EINVAL; - r = amdgpu_gtt_mgr_alloc_entries(&adev->mman.gtt_mgr, - &adev->vce.gart_node, num_pages, - DRM_MM_INSERT_LOW); - if (r) - return r; + if (!drm_mm_node_allocated(&adev->vce.gart_node)) { + r = amdgpu_gtt_mgr_alloc_entries(&adev->mman.gtt_mgr, + &adev->vce.gart_node, num_pages, + DRM_MM_INSERT_LOW); + if (r) + return r; + } vce_gart_start_offs = amdgpu_gtt_node_to_byte_offset(&adev->vce.gart_node); -- cgit v1.2.3 From 3e5a1d5bb2ff061e64c7992f8e5404dfd4c2d0f3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Wed, 13 May 2026 22:04:13 +0200 Subject: drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VCPU BO contains the actual FW at an offset, but it was not calculated into the VCPU BO size. Subtract this from the FW size to make sure there is no out of bounds access. Make sure the stack and data offsets are aligned to the 32K TLB size. Check that the FW microcode actually fits in the space that is reserved for it. Fixes: d4a640d4b9f3 ("drm/amdgpu/vce1: Implement VCE1 IP block (v2)") Signed-off-by: Timur Kristóf Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449) --- drivers/gpu/drm/amd/amdgpu/vce_v1_0.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c index 92c3cf3fce4f..32ee6452f95d 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c @@ -42,9 +42,10 @@ #include "oss/oss_1_0_d.h" #include "oss/oss_1_0_sh_mask.h" +#define VCE_V1_0_ALIGNMENT (32 * 1024) #define VCE_V1_0_FW_SIZE (256 * 1024) #define VCE_V1_0_STACK_SIZE (64 * 1024) -#define VCE_V1_0_DATA_SIZE (7808 * (AMDGPU_MAX_VCE_HANDLES + 1)) +#define VCE_V1_0_DATA_SIZE (ALIGN(7808 * (AMDGPU_MAX_VCE_HANDLES + 1), VCE_V1_0_ALIGNMENT)) #define VCE_STATUS_VCPU_REPORT_FW_LOADED_MASK 0x02 static void vce_v1_0_set_ring_funcs(struct amdgpu_device *adev); @@ -189,17 +190,22 @@ static int vce_v1_0_load_fw_signature(struct amdgpu_device *adev) { const struct common_firmware_header *hdr; struct vce_v1_0_fw_signature *sign; - unsigned int ucode_offset; + u32 ucode_offset; + u32 ucode_size; uint32_t chip_id; u32 *cpu_addr; int i; hdr = (const struct common_firmware_header *)adev->vce.fw->data; ucode_offset = le32_to_cpu(hdr->ucode_array_offset_bytes); + ucode_size = hdr->ucode_size_bytes - sizeof(struct vce_v1_0_fw_signature *); cpu_addr = adev->vce.cpu_addr; sign = (void *)adev->vce.fw->data + ucode_offset; + if (ucode_size > VCE_V1_0_FW_SIZE - AMDGPU_VCE_FIRMWARE_OFFSET) + return -EINVAL; + switch (adev->asic_type) { case CHIP_TAHITI: chip_id = 0x01000014; @@ -231,7 +237,7 @@ static int vce_v1_0_load_fw_signature(struct amdgpu_device *adev) cpu_addr[4] = cpu_to_le32(le32_to_cpu(sign->length) + 64); memset_io(&cpu_addr[5], 0, 44); - memcpy_toio(&cpu_addr[16], &sign[1], hdr->ucode_size_bytes - sizeof(*sign)); + memcpy_toio(&cpu_addr[16], &sign[1], ucode_size); cpu_addr += (le32_to_cpu(sign->length) + 64) / 4; memcpy_toio(&cpu_addr[0], &sign->val[i].sigval[0], 16); @@ -312,17 +318,22 @@ static int vce_v1_0_mc_resume(struct amdgpu_device *adev) WREG32(mmVCE_VCPU_SCRATCH7, AMDGPU_MAX_VCE_HANDLES); offset = adev->vce.gpu_addr + AMDGPU_VCE_FIRMWARE_OFFSET; - size = VCE_V1_0_FW_SIZE; + size = VCE_V1_0_FW_SIZE - AMDGPU_VCE_FIRMWARE_OFFSET; WREG32(mmVCE_VCPU_CACHE_OFFSET0, offset); WREG32(mmVCE_VCPU_CACHE_SIZE0, size); offset += size; size = VCE_V1_0_STACK_SIZE; + WARN_ON(!IS_ALIGNED(offset, VCE_V1_0_ALIGNMENT)); + WARN_ON(!IS_ALIGNED(size, VCE_V1_0_ALIGNMENT)); WREG32(mmVCE_VCPU_CACHE_OFFSET1, offset); WREG32(mmVCE_VCPU_CACHE_SIZE1, size); offset += size; size = VCE_V1_0_DATA_SIZE; + WARN_ON(!IS_ALIGNED(offset, VCE_V1_0_ALIGNMENT)); + WARN_ON(!IS_ALIGNED(size, VCE_V1_0_ALIGNMENT)); + WARN_ON((offset + size - adev->vce.gpu_addr) > amdgpu_bo_size(adev->vce.vcpu_bo)); WREG32(mmVCE_VCPU_CACHE_OFFSET2, offset); WREG32(mmVCE_VCPU_CACHE_SIZE2, size); -- cgit v1.2.3 From f5a247e0377cd30d658d52ae8a70c82978cc37df Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Wed, 13 May 2026 22:04:14 +0200 Subject: drm/amdgpu/vce1: Stop using amdgpu_vce_resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VCE1 firmware works slightly differently and is already loaded by vce_v1_0_load_fw(). It doesn't actually need to call amdgpu_vce_resume(). Signed-off-by: Timur Kristóf Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 33d8951405e2dd81ac61edebc680e2dfb6b4fc9f) --- drivers/gpu/drm/amd/amdgpu/vce_v1_0.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c index 32ee6452f95d..93253db5e2de 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v1_0.c @@ -178,7 +178,7 @@ static void vce_v1_0_init_cg(struct amdgpu_device *adev) } /** - * vce_v1_0_load_fw_signature - load firmware signature into VCPU BO + * vce_v1_0_load_fw() - load firmware signature into VCPU BO * * @adev: amdgpu_device pointer * @@ -186,7 +186,7 @@ static void vce_v1_0_init_cg(struct amdgpu_device *adev) * This function finds the signature appropriate for the current * ASIC and writes that into the VCPU BO. */ -static int vce_v1_0_load_fw_signature(struct amdgpu_device *adev) +static int vce_v1_0_load_fw(struct amdgpu_device *adev) { const struct common_firmware_header *hdr; struct vce_v1_0_fw_signature *sign; @@ -232,6 +232,8 @@ static int vce_v1_0_load_fw_signature(struct amdgpu_device *adev) return -EINVAL; } + memset_io(&cpu_addr[0], 0, amdgpu_bo_size(adev->vce.vcpu_bo)); + cpu_addr += (256 - 64) / 4; memcpy_toio(&cpu_addr[0], &sign->val[i].nonce[0], 16); cpu_addr[4] = cpu_to_le32(le32_to_cpu(sign->length) + 64); @@ -592,10 +594,7 @@ static int vce_v1_0_sw_init(struct amdgpu_ip_block *ip_block) if (r) return r; - r = amdgpu_vce_resume(adev); - if (r) - return r; - r = vce_v1_0_load_fw_signature(adev); + r = vce_v1_0_load_fw(adev); if (r) return r; r = vce_v1_0_ensure_vcpu_bo_32bit_addr(adev); @@ -714,10 +713,7 @@ static int vce_v1_0_resume(struct amdgpu_ip_block *ip_block) struct amdgpu_device *adev = ip_block->adev; int r; - r = amdgpu_vce_resume(adev); - if (r) - return r; - r = vce_v1_0_load_fw_signature(adev); + r = vce_v1_0_load_fw(adev); if (r) return r; r = vce_v1_0_ensure_vcpu_bo_32bit_addr(adev); -- cgit v1.2.3 From 5dc3d16cd072a3b8595f430b6683d688d1d62f37 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Wed, 13 May 2026 22:04:15 +0200 Subject: drm/amdgpu/vce2: Fix VCE 2 firmware size and offsets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VCPU BO contains the actual FW at an offset, but it was not calculated into the VCPU BO size. Subtract this from the FW size to make sure there is no out of bounds access. Additionally, increase the VCE_V2_0_DATA_SIZE to have extra space after the VCE handles. Also increase the data size used for each VCE handle. The FW needs 23744 bytes, use 24K to be safe. This fixes VM faults when using VCE 2. Cc: John Olender Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4802 Fixes: e98226221467 ("drm/amdgpu: recalculate VCE firmware BO size") Signed-off-by: Timur Kristóf Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit a20d21df625548c1738c0745f753c5d6eb823bc3) --- drivers/gpu/drm/amd/amdgpu/vce_v2_0.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c index db149eda6204..3a6fc8604108 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v2_0.c @@ -37,9 +37,14 @@ #include "oss/oss_2_0_d.h" #include "oss/oss_2_0_sh_mask.h" + +/* Use 24K to be safe. The FW supposedly only requires 23744 bytes. */ +#define VCE_V2_0_DATA_ENTRY_SIZE (24 * 1024) + #define VCE_V2_0_FW_SIZE (256 * 1024) #define VCE_V2_0_STACK_SIZE (64 * 1024) -#define VCE_V2_0_DATA_SIZE (23552 * AMDGPU_MAX_VCE_HANDLES) +#define VCE_V2_0_DATA_SIZE (VCE_V2_0_DATA_ENTRY_SIZE * (AMDGPU_MAX_VCE_HANDLES + 1)) + #define VCE_STATUS_VCPU_REPORT_FW_LOADED_MASK 0x02 static void vce_v2_0_set_ring_funcs(struct amdgpu_device *adev); @@ -183,7 +188,7 @@ static void vce_v2_0_mc_resume(struct amdgpu_device *adev) WREG32(mmVCE_LMI_VCPU_CACHE_40BIT_BAR, (adev->vce.gpu_addr >> 8)); offset = AMDGPU_VCE_FIRMWARE_OFFSET; - size = VCE_V2_0_FW_SIZE; + size = VCE_V2_0_FW_SIZE - AMDGPU_VCE_FIRMWARE_OFFSET; WREG32(mmVCE_VCPU_CACHE_OFFSET0, offset & 0x7fffffff); WREG32(mmVCE_VCPU_CACHE_SIZE0, size); -- cgit v1.2.3 From 0c61a9732a35b0a96213119c8212349da9cda117 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Timur=20Krist=C3=B3f?= Date: Wed, 13 May 2026 22:04:16 +0200 Subject: drm/amdgpu/vce3: Fix VCE 3 firmware size and offsets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VCPU BO contains the actual FW at an offset, but it was not calculated into the VCPU BO size. Subtract this from the FW size to make sure there is no out of bounds access. This may fix VM faults when using VCE 3. Cc: John Olender Fixes: e98226221467 ("drm/amdgpu: recalculate VCE firmware BO size") Signed-off-by: Timur Kristóf Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 15c369257bd85f47a514744f960c5a51c867716f) --- drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c index 03d79e464f04..c69f7d82060f 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c @@ -574,7 +574,7 @@ static void vce_v3_0_mc_resume(struct amdgpu_device *adev, int idx) } else WREG32(mmVCE_LMI_VCPU_CACHE_40BIT_BAR, (adev->vce.gpu_addr >> 8)); offset = AMDGPU_VCE_FIRMWARE_OFFSET; - size = VCE_V3_0_FW_SIZE; + size = VCE_V3_0_FW_SIZE - AMDGPU_VCE_FIRMWARE_OFFSET; WREG32(mmVCE_VCPU_CACHE_OFFSET0, offset & 0x7fffffff); WREG32(mmVCE_VCPU_CACHE_SIZE0, size); -- cgit v1.2.3 From a1d4b228e3dc5134c4bd06e55e81dbb604c8cadb Mon Sep 17 00:00:00 2001 From: David Francis Date: Tue, 12 May 2026 15:15:33 -0400 Subject: drm/amdkfd: Check bounds on allocate_doorbell allocated_doorbell has an option to set the doorbell id to a specific value (used by CRIU). This value was not bounds checked. Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS. Signed-off-by: David Francis Reviewed-by: Harish Kasiviswanathan Signed-off-by: Alex Deucher (cherry picked from commit 1f087bb8cf9e8797633da35c85435e557ef74d06) --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index 9185ebe4c079..c9239728afd6 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -475,6 +475,9 @@ static int allocate_doorbell(struct qcm_process_device *qpd, } else { /* For CP queues on SOC15 */ if (restore_id) { + if (*restore_id >= KFD_MAX_NUM_OF_QUEUES_PER_PROCESS) + return -EINVAL; + /* make sure that ID is free */ if (__test_and_set_bit(*restore_id, qpd->doorbell_bitmap)) return -EINVAL; -- cgit v1.2.3 From 0978406224d21bd35f9230a25534849ec06bf74c Mon Sep 17 00:00:00 2001 From: Sunil Khatri Date: Thu, 14 May 2026 12:31:00 +0530 Subject: drm/amdgpu: use atomic operation to achieve lockless serialization In amdgpu_seq64_alloc there is a possibility that two difference cores from two separate NODES can try to and could get the same free slot. So this fixes that race here using atomic test_and_set clear operations. Signed-off-by: Sunil Khatri Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher (cherry picked from commit 4d50a14d346141e03a7c3905e496d91e048bc30c) --- drivers/gpu/drm/amd/amdgpu/amdgpu_seq64.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_seq64.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_seq64.c index a0b479d5fff1..f4be19223588 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_seq64.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_seq64.c @@ -175,11 +175,14 @@ int amdgpu_seq64_alloc(struct amdgpu_device *adev, u64 *va, { unsigned long bit_pos; - bit_pos = find_first_zero_bit(adev->seq64.used, adev->seq64.num_sem); - if (bit_pos >= adev->seq64.num_sem) - return -ENOSPC; + for (;;) { + bit_pos = find_first_zero_bit(adev->seq64.used, adev->seq64.num_sem); + if (bit_pos >= adev->seq64.num_sem) + return -ENOSPC; - __set_bit(bit_pos, adev->seq64.used); + if (!test_and_set_bit(bit_pos, adev->seq64.used)) + break; + } *va = bit_pos * sizeof(u64) + amdgpu_seq64_get_va_base(adev); @@ -205,7 +208,7 @@ void amdgpu_seq64_free(struct amdgpu_device *adev, u64 va) bit_pos = (va - amdgpu_seq64_get_va_base(adev)) / sizeof(u64); if (bit_pos < adev->seq64.num_sem) - __clear_bit(bit_pos, adev->seq64.used); + clear_bit(bit_pos, adev->seq64.used); } /** -- cgit v1.2.3 From 6dc2c49a705195c89b09b134d0bc4dc5e42d1fea Mon Sep 17 00:00:00 2001 From: David Francis Date: Tue, 12 May 2026 15:18:18 -0400 Subject: drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id allocate_sdma_queue has an option where the sdma queue id can be specified (used by CRIU). We weren't bounds-checking that value. Confirm it's less than the maximum number of queues. Signed-off-by: David Francis Reviewed-by: Harish Kasiviswanathan Signed-off-by: Alex Deucher (cherry picked from commit bfe9a7545b2a7be1c543f1741e16f2d5ec4116ae) --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index c9239728afd6..e0a31e11f0ff 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -1590,6 +1590,9 @@ static int allocate_sdma_queue(struct device_queue_manager *dqm, } if (restore_sdma_id) { + if (*restore_sdma_id >= get_num_sdma_queues(dqm)) + return -EINVAL; + /* Re-use existing sdma_id */ if (!test_bit(*restore_sdma_id, dqm->sdma_bitmap)) { dev_err(dev, "SDMA queue already in use\n"); @@ -1616,6 +1619,9 @@ static int allocate_sdma_queue(struct device_queue_manager *dqm, return -ENOMEM; } if (restore_sdma_id) { + if (*restore_sdma_id >= get_num_xgmi_sdma_queues(dqm)) + return -EINVAL; + /* Re-use existing sdma_id */ if (!test_bit(*restore_sdma_id, dqm->xgmi_sdma_bitmap)) { dev_err(dev, "SDMA queue already in use\n"); -- cgit v1.2.3 From cd86529ec61474a38c3837fb7823790a7c3f8cce Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Mon, 4 May 2026 11:14:45 -0400 Subject: drm/amd/display: Fix integer overflow in bios_get_image() [Why&How] The bounds check in bios_get_image() computes 'offset + size' using unsigned 32-bit arithmetic before comparing against bios_size. If a VBIOS image contains a near-UINT32_MAX offset the addition wraps to a small value, the comparison passes, and the function returns a wild pointer past the VBIOS mapping. Additionally, the comparison uses '<' (strict), which incorrectly rejects the valid exact-fit case where offset + size == bios_size. Fix both issues by restructuring the check to avoid the addition entirely: first reject if offset alone exceeds bios_size, then check size against the remaining space (bios_size - offset). This eliminates the overflow and correctly permits exact-fit accesses. Assisted-by: GitHub Copilot:claude-opus-4.6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit d40fb392af659c4a02b560319f226842f6ec1a95) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/bios/bios_parser_helper.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser_helper.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser_helper.c index 8d2cf95ae739..e00dc05c2d9d 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser_helper.c +++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser_helper.c @@ -37,10 +37,13 @@ uint8_t *bios_get_image(struct dc_bios *bp, uint32_t offset, uint32_t size) { - if (bp->bios && offset + size < bp->bios_size) - return bp->bios + offset; - else + if (!bp->bios) return NULL; + + if (offset > bp->bios_size || size > bp->bios_size - offset) + return NULL; + + return bp->bios + offset; } #include "reg_helper.h" -- cgit v1.2.3 From 86d2b20644b11d21fe52c596e6e922b4590a3e3f Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Mon, 4 May 2026 16:14:11 -0400 Subject: drm/amd/display: Validate GPIO pin LUT table size before iterating [Why&How] The GPIO pin table parsers in get_gpio_i2c_info() and bios_parser_get_gpio_pin_info() derive an element count from the VBIOS table_header.structuresize field, then iterate over gpio_pin[] entries. However, GET_IMAGE() only validates that the table header itself fits within the BIOS image. If the VBIOS reports a structuresize larger than the actual mapped data, the loop reads past the end of the BIOS image, causing an out-of-bounds read. Fix this by calling bios_get_image() to validate that the full claimed structuresize is accessible within the BIOS image before entering the loop in both functions. Assisted-by: GitHub Copilot:claude-opus-4-6 Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c index a1c08e1cc411..c51c4b2c6fae 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c +++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c @@ -493,6 +493,10 @@ static enum bp_result get_gpio_i2c_info( - sizeof(struct atom_common_table_header)) / sizeof(struct atom_gpio_pin_assignment); + if (!bios_get_image(&bp->base, DATA_TABLES(gpio_pin_lut), + le16_to_cpu(header->table_header.structuresize))) + return BP_RESULT_BADBIOSTABLE; + pin = (struct atom_gpio_pin_assignment *) header->gpio_pin; for (table_index = 0; table_index < count; table_index++) { @@ -681,6 +685,11 @@ static enum bp_result bios_parser_get_gpio_pin_info( count = (le16_to_cpu(header->table_header.structuresize) - sizeof(struct atom_common_table_header)) / sizeof(struct atom_gpio_pin_assignment); + + if (!bios_get_image(&bp->base, DATA_TABLES(gpio_pin_lut), + le16_to_cpu(header->table_header.structuresize))) + return BP_RESULT_BADBIOSTABLE; + for (i = 0; i < count; ++i) { if (header->gpio_pin[i].gpio_id != gpio_id) continue; -- cgit v1.2.3 From 6c92f6d9600efa3ef0d9e560a2b52776d9803c29 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Thu, 7 May 2026 16:26:31 -0400 Subject: drm/amd/display: Validate payload length and link_index in dc_process_dmub_aux_transfer_async [Why&How] dc_process_dmub_aux_transfer_async() copies payload->length bytes into a 16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which is a no-op in release builds. If a caller ever passes length > 16 this results in a stack buffer overflow via memcpy. Additionally, link_index is used to dereference dc->links[] without bounds checking against dc->link_count, risking an out-of-bounds access. Replace the ASSERT with a hard runtime check that returns false when payload->length exceeds the destination buffer size, and add a bounds check for link_index before it is used. Assisted-by: GitHub Copilot:Claude claude-4-opus Reviewed-by: Alex Hung Signed-off-by: Harry Wentland Signed-off-by: Ivan Lipski Tested-by: Dan Wheeler Signed-off-by: Alex Deucher (cherry picked from commit ba4caa9fecdf7a38f98c878ad05a8a64148b6881) Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/core/dc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 419f894c87b0..b3530fbf32f7 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -6071,7 +6071,11 @@ bool dc_process_dmub_aux_transfer_async(struct dc *dc, uint8_t action; union dmub_rb_cmd cmd = {0}; - ASSERT(payload->length <= 16); + if (link_index >= dc->link_count || !dc->links[link_index]) + return false; + + if (payload->length > sizeof(cmd.dp_aux_access.aux_control.dpaux.data)) + return false; cmd.dp_aux_access.header.type = DMUB_CMD__DP_AUX_ACCESS; cmd.dp_aux_access.header.payload_bytes = 0; -- cgit v1.2.3 From 353f7430d1eccd481cc089decd1fc377d4312f4a Mon Sep 17 00:00:00 2001 From: Yifan Zhang Date: Mon, 11 May 2026 22:14:23 +0800 Subject: drm/amdgpu: unmap all user mappings of framebuffer and doorbell before mode1 reset During Mode 1 reset, the ASIC undergoes a reset cycle and becomes temporarily inaccessible via PCIe. Any attempt to access framebuffer or MMIO registers during this window can result in uncompleted PCIe transactions, leading to NMI panics or system hangs. To prevent this, Unmap all of the applications mappings of the framebuffer and doorbell BARs before mode1 reset. Also prevent new mappings from coming in during the reset process. v2: remove inode in kfd_dev (Christian) v3: correct unmap offset (Felix), remove prevent new mappings part to avoid deadlock (Christian) Reviewed-by: Felix Kuehling Signed-off-by: Yifan Zhang Signed-off-by: Alex Deucher (cherry picked from commit 70cadefcc6160c575b04f763ada34c20e868d577) --- drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c | 25 +++++++++++++++++++++++++ drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 6 ++++++ drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 22 ++++++++++++++++++++++ drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 1 + 5 files changed, 55 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c index d9e283f3b57d..9783a3cefb04 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.c @@ -36,6 +36,9 @@ #include "amdgpu_ras.h" #include "amdgpu_umc.h" #include "amdgpu_reset.h" +#if IS_ENABLED(CONFIG_HSA_AMD) +#include "kfd_priv.h" +#endif /* Total memory size in system memory and all GPU VRAM. Used to * estimate worst case amount of memory to reserve for page tables @@ -320,6 +323,28 @@ void amdgpu_amdkfd_gpu_reset(struct amdgpu_device *adev) (void)amdgpu_reset_domain_schedule(adev->reset_domain, &adev->kfd.reset_work); } +void amdgpu_amdkfd_clear_kfd_mapping(struct amdgpu_device *adev) +{ +#if IS_ENABLED(CONFIG_HSA_AMD) + struct kfd_dev *kfd = adev->kfd.dev; + unsigned int i; + + if (!kfd) + return; + + for (i = 0; i < kfd->num_nodes; i++) { + struct kfd_node *node = kfd->nodes[i]; + + kfd_dev_unmap_mapping_range(KFD_MMAP_TYPE_DOORBELL | + KFD_MMAP_GPU_ID(node->id), + kfd_doorbell_process_slice(kfd)); + kfd_dev_unmap_mapping_range(KFD_MMAP_TYPE_MMIO | + KFD_MMAP_GPU_ID(node->id), + PAGE_SIZE); + } +#endif +} + int amdgpu_amdkfd_alloc_kernel_mem(struct amdgpu_device *adev, size_t size, u32 domain, void **mem_obj, uint64_t *gpu_addr, void **cpu_ptr, bool cp_mqd_gfx9) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h index cdbab7f8cee8..2b4108f83f48 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd.h @@ -358,6 +358,7 @@ int amdgpu_amdkfd_reserve_mem_limit(struct amdgpu_device *adev, uint64_t size, u32 alloc_flag, int8_t xcp_id); void amdgpu_amdkfd_unreserve_mem_limit(struct amdgpu_device *adev, uint64_t size, u32 alloc_flag, int8_t xcp_id); +void amdgpu_amdkfd_clear_kfd_mapping(struct amdgpu_device *adev); u64 amdgpu_amdkfd_xcp_memory_size(struct amdgpu_device *adev, int xcp_id); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 1424c98d2006..feab90e3efd1 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -5835,6 +5835,12 @@ int amdgpu_device_gpu_recover(struct amdgpu_device *adev, /* We need to lock reset domain only once both for XGMI and single device */ amdgpu_device_recovery_get_reset_lock(adev, &device_list); + /* unmap all the mappings of doorbell and framebuffer to prevent user space from + * accessing them + */ + unmap_mapping_range(adev->ddev.anon_inode->i_mapping, 0, 0, 1); + amdgpu_amdkfd_clear_kfd_mapping(adev); + amdgpu_device_halt_activities(adev, job, reset_context, &device_list, hive, need_emergency_restart); if (need_emergency_restart) diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c index f95bf6d95534..03b266b26738 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c @@ -67,6 +67,21 @@ static const struct class kfd_class = { .name = kfd_dev_name, }; +/* + * Cache the address space of the chardev on first open so that the reset + * path can drop all userspace mappings of doorbell and MMIO ranges via + * unmap_mapping_range(). + */ +static struct address_space *kfd_dev_mapping; + +void kfd_dev_unmap_mapping_range(loff_t const holebegin, loff_t const holelen) +{ + struct address_space *mapping = READ_ONCE(kfd_dev_mapping); + + if (mapping) + unmap_mapping_range(mapping, holebegin, holelen, 1); +} + static inline struct kfd_process_device *kfd_lock_pdd_by_id(struct kfd_process *p, __u32 gpu_id) { struct kfd_process_device *pdd; @@ -133,6 +148,13 @@ static int kfd_open(struct inode *inode, struct file *filep) if (iminor(inode) != 0) return -ENODEV; + /* + * /dev/kfd is a single chardev so all opens share one inode. Cache + * its address_space on the first open for use by the reset path. + */ + if (!READ_ONCE(kfd_dev_mapping)) + cmpxchg(&kfd_dev_mapping, NULL, inode->i_mapping); + is_32bit_user_mode = in_compat_syscall(); if (is_32bit_user_mode) { diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h index 7b5b12206919..d5b07789eda4 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h +++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h @@ -395,6 +395,7 @@ enum kfd_mempool { /* Character device interface */ int kfd_chardev_init(void); void kfd_chardev_exit(void); +void kfd_dev_unmap_mapping_range(loff_t const holebegin, loff_t const holelen); /** * enum kfd_unmap_queues_filter - Enum for queue filters. -- cgit v1.2.3 From 893fea60f8393fc99fa522f1718690421a5f9951 Mon Sep 17 00:00:00 2001 From: Xiang Liu Date: Mon, 11 May 2026 21:28:59 +0800 Subject: drm/amd/ras: Fix UMC error address allocation leak amdgpu_umc_handle_bad_pages() allocates err_data->err_addr before querying UMC error information. In the direct and firmware query paths, the pointer is reassigned to a fresh allocation before the original buffer is released, so the initial allocation is leaked on each handled event. Free the existing buffer before replacing it in those query paths so the function exit cleanup only owns the active allocation. Signed-off-by: Xiang Liu Reviewed-by: Stanley.Yang Reviewed-by: Tao Zhou Signed-off-by: Alex Deucher (cherry picked from commit 911b1bdd22c3712a22b60fcc58f7b9f2d07b0803) --- drivers/gpu/drm/amd/amdgpu/amdgpu_umc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.c index 0238c2798de4..b8ed931f8a40 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_umc.c @@ -130,6 +130,7 @@ void amdgpu_umc_handle_bad_pages(struct amdgpu_device *adev, if (adev->umc.ras && adev->umc.ras->ras_block.hw_ops && adev->umc.ras->ras_block.hw_ops->query_ras_error_address && adev->umc.max_ras_err_cnt_per_query) { + kfree(err_data->err_addr); err_data->err_addr = kzalloc_objs(struct eeprom_table_record, adev->umc.max_ras_err_cnt_per_query); @@ -160,6 +161,7 @@ void amdgpu_umc_handle_bad_pages(struct amdgpu_device *adev, if (adev->umc.ras && adev->umc.ras->ecc_info_query_ras_error_address && adev->umc.max_ras_err_cnt_per_query) { + kfree(err_data->err_addr); err_data->err_addr = kzalloc_objs(struct eeprom_table_record, adev->umc.max_ras_err_cnt_per_query); -- cgit v1.2.3 From cd7cfcdb4dd45c79ef6825a3dc918782f604f5ed Mon Sep 17 00:00:00 2001 From: Ce Sun Date: Mon, 11 May 2026 18:04:57 +0800 Subject: drm/amdgpu: avoid integer overflow in VA range check The original addition operation in 64-bit unsigned type may encounter overflow situations. To prevent such issues and safely reject invalid inputs, the check_add_overflow() function is used. Signed-off-by: Ce Sun Reviewed-by: Tao Zhou Signed-off-by: Alex Deucher (cherry picked from commit cc768f4dd0bb9083c813683eeec44fc23921f771) --- drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c index 23f2304ee7e0..123d4a09114d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c @@ -825,7 +825,7 @@ int amdgpu_gem_va_ioctl(struct drm_device *dev, void *data, struct drm_syncobj *timeline_syncobj = NULL; struct dma_fence_chain *timeline_chain = NULL; struct drm_exec exec; - uint64_t vm_size; + uint64_t vm_size, tmp; int r = 0; /* Validate virtual address range against reserved regions. */ @@ -849,7 +849,7 @@ int amdgpu_gem_va_ioctl(struct drm_device *dev, void *data, vm_size = adev->vm_manager.max_pfn * AMDGPU_GPU_PAGE_SIZE; vm_size -= AMDGPU_VA_RESERVED_TOP; - if (args->va_address + args->map_size > vm_size) { + if (check_add_overflow(args->va_address, args->map_size, &tmp) || tmp > vm_size) { dev_dbg(dev->dev, "va_address 0x%llx is in top reserved area 0x%llx\n", args->va_address + args->map_size, vm_size); -- cgit v1.2.3 From b6a28b77b88e776a8cc7739005718e03c4c9be57 Mon Sep 17 00:00:00 2001 From: Sunil Khatri Date: Wed, 13 May 2026 13:29:35 +0530 Subject: drm/amdgpu: userq_va_mapped should remain true once done MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Multiple queues needs these bo_va objects belonging to the same uq_mgr. So once they are mapped lets not unmap them as at any point of time any of the queues might be using it. Also userq_va_mapped should be a boolean than atomic. Signed-off-by: Sunil Khatri Reviewed-by: Christian König Signed-off-by: Alex Deucher (cherry picked from commit 5c02889ea22575c3bcfdf212e65fac316cbc6c6a) --- drivers/gpu/drm/amd/amdgpu/amdgpu_object.h | 3 ++- drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c | 16 ++++------------ drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 2 +- 3 files changed, 7 insertions(+), 14 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h index 912c9afaf9e1..4d68732d6223 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h @@ -96,7 +96,8 @@ struct amdgpu_bo_va { * if non-zero, cannot unmap from GPU because user queues may still access it */ unsigned int queue_refcount; - atomic_t userq_va_mapped; + /* Indicates if this buffer is mapped for any user queue. Once set, never reset. */ + bool userq_va_mapped; }; struct amdgpu_bo { diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c index 6111f6858d2d..f677a9f2d4ad 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c @@ -227,7 +227,7 @@ static int amdgpu_userq_buffer_va_list_add(struct amdgpu_usermode_queue *queue, INIT_LIST_HEAD(&va_cursor->list); va_cursor->gpu_addr = addr; - atomic_set(&va_map->bo_va->userq_va_mapped, 1); + va_map->bo_va->userq_va_mapped = true; list_add(&va_cursor->list, &queue->userq_va_list); return 0; @@ -274,7 +274,7 @@ static bool amdgpu_userq_buffer_va_mapped(struct amdgpu_vm *vm, u64 addr) dma_resv_assert_held(vm->root.bo->tbo.base.resv); mapping = amdgpu_vm_bo_lookup_mapping(vm, addr); - if (!IS_ERR_OR_NULL(mapping) && atomic_read(&mapping->bo_va->userq_va_mapped)) + if (!IS_ERR_OR_NULL(mapping) && mapping->bo_va->userq_va_mapped) r = true; else r = false; @@ -300,15 +300,6 @@ static bool amdgpu_userq_buffer_vas_mapped(struct amdgpu_usermode_queue *queue) return false; } -static void amdgpu_userq_buffer_va_list_del(struct amdgpu_bo_va_mapping *mapping, - struct amdgpu_userq_va_cursor *va_cursor) -{ - if (mapping) - atomic_set(&mapping->bo_va->userq_va_mapped, 0); - list_del(&va_cursor->list); - kfree(va_cursor); -} - static void amdgpu_userq_buffer_vas_list_cleanup(struct amdgpu_device *adev, struct amdgpu_usermode_queue *queue) { @@ -323,7 +314,8 @@ static void amdgpu_userq_buffer_vas_list_cleanup(struct amdgpu_device *adev, if (mapping) dev_dbg(adev->dev, "delete the userq:%p va:%llx\n", queue, va_cursor->gpu_addr); - amdgpu_userq_buffer_va_list_del(mapping, va_cursor); + list_del(&va_cursor->list); + kfree(va_cursor); } } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 9ba9de16a27a..fccd758b6699 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -2002,7 +2002,7 @@ int amdgpu_vm_bo_unmap(struct amdgpu_device *adev, * during user requests GEM unmap IOCTL except for forcing the unmap * from user space. */ - if (unlikely(atomic_read(&bo_va->userq_va_mapped) > 0)) + if (unlikely(bo_va->userq_va_mapped)) amdgpu_userq_gem_va_unmap_validate(adev, mapping, saddr); list_del(&mapping->list); -- cgit v1.2.3 From d093c01d30fc32cb82458731c33fa2a787ff1e7b Mon Sep 17 00:00:00 2001 From: Vitaliy Triang3l Kuzmin Date: Sat, 16 May 2026 00:48:32 +0300 Subject: drm/radeon/evergreen_cs: Add missing NULL prefix check in surface check 'evergreen_surface_check' is called with a NULL warning prefix when handling potentially recoverable issues or just to compute the alignment requirements, and 'evergreen_surface_check' is called again in case of failure (with the correct prefix, as opposed to NULL), therefore, the initial check must not print a warning, because the surface may be accepted successfully after having been corrected, however if it isn't, the final check will print the warning anyway. The surface check functions specific to array modes already implement this behavior, but the 'evergreen_surface_check' function itself doesn't. This is also supposed to fix the "'%s' directive argument is null [-Werror=format-overflow=]" compiler warning. Fixes: 285484e2d55e ("drm/radeon: add support for evergreen/ni tiling informations v11") Reported-by: Arnd Bergmann Signed-off-by: Vitaliy Triang3l Kuzmin Signed-off-by: Alex Deucher (cherry picked from commit e20ea411c99f6968af35fd03e9ee21f70d799144) --- drivers/gpu/drm/radeon/evergreen_cs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c index 3142ef4da7f4..9196f85db9ce 100644 --- a/drivers/gpu/drm/radeon/evergreen_cs.c +++ b/drivers/gpu/drm/radeon/evergreen_cs.c @@ -312,8 +312,10 @@ static int evergreen_surface_check(struct radeon_cs_parser *p, case ARRAY_2D_TILED_THIN1: return evergreen_surface_check_2d(p, surf, prefix); default: - dev_warn(p->dev, "%s:%d %s invalid array mode %d\n", - __func__, __LINE__, prefix, surf->mode); + if (prefix) { + dev_warn(p->dev, "%s:%d %s invalid array mode %d\n", + __func__, __LINE__, prefix, surf->mode); + } return -EINVAL; } return -EINVAL; -- cgit v1.2.3 From d4d76c9ee1997cc8c977a63f6c43551c253c1066 Mon Sep 17 00:00:00 2001 From: Jeremy Erazo Date: Fri, 15 May 2026 19:31:41 +0000 Subject: smb: client: use data_len for SMB2 READ encrypted folioq copy In handle_read_data() the encrypted/folioq branch (buf_len <= data_offset, reached via receive_encrypted_read for transform PDUs > CIFSMaxBufSize + MAX_HEADER_SIZE) copies the READ payload using buffer_len rather than data_len: rdata->result = cifs_copy_folioq_to_iter(buffer, buffer_len, cur_off, &rdata->subreq.io_iter); ... rdata->got_bytes = buffer_len; buffer_len comes from the SMB3 transform header OriginalMessageSize field (OriginalMessageSize - read_rsp_size); it represents the size of the decrypted message after the SMB2 header. data_len comes from the SMB2 READ response DataLength field; it represents the actual READ payload size and may be smaller than buffer_len when the decrypted message contains padding or other trailing bytes after the READ payload. The existing check `data_len > buffer_len - pad_len` only enforces an upper bound, so a server that emits OriginalMessageSize larger than read_rsp_size + pad_len + data_len passes the check and the kernel copies buffer_len bytes per response, ignoring the server-asserted DataLength. Two observable failures with a crafted server (DataLength=4, buffer_len=20000): - the kernel returns 20000 bytes per sub-request to userspace and sets got_bytes = buffer_len, even though the response claimed only 4 bytes of payload; - on a partial netfs sub-request whose iterator is sized to data_len, the over-large copy_folio_to_iter() short-reads, cifs_copy_folioq_to_iter() returns -EIO via the n != len path, and the entire netfs read collapses to -EIO even though the leading sub-requests succeeded. Use data_len for the copy length and for got_bytes so the kernel honours the server-asserted READ payload size. For well-formed servers (where buffer_len == pad_len + data_len) the change is behaviour-equivalent. Cc: stable@vger.kernel.org Signed-off-by: Jeremy Erazo Acked-by: David Howells Signed-off-by: Steve French --- fs/smb/client/smb2ops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/smb/client/smb2ops.c b/fs/smb/client/smb2ops.c index 3738204984f5..ee83700269cf 100644 --- a/fs/smb/client/smb2ops.c +++ b/fs/smb/client/smb2ops.c @@ -4826,7 +4826,7 @@ handle_read_data(struct TCP_Server_Info *server, struct mid_q_entry *mid, } /* Copy the data to the output I/O iterator. */ - rdata->result = cifs_copy_folioq_to_iter(buffer, buffer_len, + rdata->result = cifs_copy_folioq_to_iter(buffer, data_len, cur_off, &rdata->subreq.io_iter); if (rdata->result != 0) { if (is_offloaded) @@ -4835,7 +4835,7 @@ handle_read_data(struct TCP_Server_Info *server, struct mid_q_entry *mid, dequeue_mid(server, mid, rdata->result); return 0; } - rdata->got_bytes = buffer_len; + rdata->got_bytes = data_len; } else if (!check_add_overflow(data_offset, data_len, &end_off) && buf_len >= end_off) { -- cgit v1.2.3 From b6fe4ff340560ecf39e10733366f85832550699a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Mon, 27 Apr 2026 16:31:31 +0200 Subject: drm/amdgpu: fix handling in amdgpu_userq_create MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Well mostly the same issues the other code had as well: 1. Memory allocation while holding the userq_mutex lock is forbidden! 2. Things were created/started/published in the wrong order. 3. The reset lock was taken in the wrong order and seems to be unecessary in the first place. 4. Error messages on invalid input parameters can spam the logs. 5. Error messages on memory allocation failures are usually superflous as well. Signed-off-by: Christian König Reviewed-by: Sunil Khatri Reviewed-by: Prike Liang Signed-off-by: Alex Deucher (cherry picked from commit 89e50de5654dbe7a137e03d78629542e17ba7202) --- drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c | 118 +++++++++++++----------------- 1 file changed, 52 insertions(+), 66 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c index f677a9f2d4ad..f070ea37d918 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_userq.c @@ -708,14 +708,14 @@ amdgpu_userq_create(struct drm_file *filp, union drm_amdgpu_userq *args) const struct amdgpu_userq_funcs *uq_funcs; struct amdgpu_usermode_queue *queue; struct amdgpu_db_info db_info; - bool skip_map_queue; - u32 qid; uint64_t index; - int r = 0; - int priority = - (args->in.flags & AMDGPU_USERQ_CREATE_FLAGS_QUEUE_PRIORITY_MASK) >> - AMDGPU_USERQ_CREATE_FLAGS_QUEUE_PRIORITY_SHIFT; + int priority; + u32 qid; + int r; + priority = + (args->in.flags & AMDGPU_USERQ_CREATE_FLAGS_QUEUE_PRIORITY_MASK) + >> AMDGPU_USERQ_CREATE_FLAGS_QUEUE_PRIORITY_SHIFT; r = amdgpu_userq_priority_permit(filp, priority); if (r) return r; @@ -728,40 +728,43 @@ amdgpu_userq_create(struct drm_file *filp, union drm_amdgpu_userq *args) uq_funcs = adev->userq_funcs[args->in.ip_type]; if (!uq_funcs) { - drm_file_err(uq_mgr->file, "Usermode queue is not supported for this IP (%u)\n", - args->in.ip_type); r = -EINVAL; goto err_pm_runtime; } queue = kzalloc_obj(struct amdgpu_usermode_queue); if (!queue) { - drm_file_err(uq_mgr->file, "Failed to allocate memory for queue\n"); r = -ENOMEM; goto err_pm_runtime; } + kref_init(&queue->refcount); INIT_LIST_HEAD(&queue->userq_va_list); queue->doorbell_handle = args->in.doorbell_handle; queue->queue_type = args->in.ip_type; queue->vm = &fpriv->vm; queue->priority = priority; - - db_info.queue_type = queue->queue_type; - db_info.doorbell_handle = queue->doorbell_handle; - db_info.db_obj = &queue->db_obj; - db_info.doorbell_offset = args->in.doorbell_offset; - queue->userq_mgr = uq_mgr; + INIT_DELAYED_WORK(&queue->hang_detect_work, + amdgpu_userq_hang_detect_work); - /* Validate the userq virtual address.*/ - r = amdgpu_bo_reserve(fpriv->vm.root.bo, false); + mutex_init(&queue->fence_drv_lock); + xa_init_flags(&queue->fence_drv_xa, XA_FLAGS_ALLOC); + r = amdgpu_userq_fence_driver_alloc(adev, &queue->fence_drv); if (r) goto free_queue; - if (amdgpu_userq_input_va_validate(adev, queue, args->in.queue_va, args->in.queue_size) || - amdgpu_userq_input_va_validate(adev, queue, args->in.rptr_va, AMDGPU_GPU_PAGE_SIZE) || - amdgpu_userq_input_va_validate(adev, queue, args->in.wptr_va, AMDGPU_GPU_PAGE_SIZE)) { + /* Make sure the queue can actually run with those virtual addresses. */ + r = amdgpu_bo_reserve(fpriv->vm.root.bo, false); + if (r) + goto free_fence_drv; + + if (amdgpu_userq_input_va_validate(adev, queue, args->in.queue_va, + args->in.queue_size) || + amdgpu_userq_input_va_validate(adev, queue, args->in.rptr_va, + AMDGPU_GPU_PAGE_SIZE) || + amdgpu_userq_input_va_validate(adev, queue, args->in.wptr_va, + AMDGPU_GPU_PAGE_SIZE)) { r = -EINVAL; amdgpu_bo_unreserve(fpriv->vm.root.bo); goto clean_mapping; @@ -769,6 +772,10 @@ amdgpu_userq_create(struct drm_file *filp, union drm_amdgpu_userq *args) amdgpu_bo_unreserve(fpriv->vm.root.bo); /* Convert relative doorbell offset into absolute doorbell index */ + db_info.queue_type = queue->queue_type; + db_info.doorbell_handle = queue->doorbell_handle; + db_info.db_obj = &queue->db_obj; + db_info.doorbell_offset = args->in.doorbell_offset; index = amdgpu_userq_get_doorbell_index(uq_mgr, &db_info, filp); if (index == (uint64_t)-EINVAL) { drm_file_err(uq_mgr->file, "Failed to get doorbell for queue\n"); @@ -777,85 +784,64 @@ amdgpu_userq_create(struct drm_file *filp, union drm_amdgpu_userq *args) } queue->doorbell_index = index; - mutex_init(&queue->fence_drv_lock); - xa_init_flags(&queue->fence_drv_xa, XA_FLAGS_ALLOC); - r = amdgpu_userq_fence_driver_alloc(adev, &queue->fence_drv); - if (r) { - drm_file_err(uq_mgr->file, "Failed to alloc fence driver\n"); - goto clean_mapping; - } - r = uq_funcs->mqd_create(queue, &args->in); if (r) { drm_file_err(uq_mgr->file, "Failed to create Queue\n"); - goto clean_fence_driver; + goto clean_mapping; } /* Update VM owner at userq submit-time for page-fault attribution. */ amdgpu_vm_set_task_info(&fpriv->vm); + r = xa_err(xa_store_irq(&adev->userq_doorbell_xa, index, queue, + GFP_KERNEL)); + if (r) + goto clean_mqd; + amdgpu_userq_ensure_ev_fence(&fpriv->userq_mgr, &fpriv->evf_mgr); /* don't map the queue if scheduling is halted */ - if (adev->userq_halt_for_enforce_isolation && - ((queue->queue_type == AMDGPU_HW_IP_GFX) || - (queue->queue_type == AMDGPU_HW_IP_COMPUTE))) - skip_map_queue = true; - else - skip_map_queue = false; - if (!skip_map_queue) { + if (!adev->userq_halt_for_enforce_isolation || + ((queue->queue_type != AMDGPU_HW_IP_GFX) && + (queue->queue_type != AMDGPU_HW_IP_COMPUTE))) { r = amdgpu_userq_map_helper(queue); if (r) { drm_file_err(uq_mgr->file, "Failed to map Queue\n"); - goto clean_mqd; + mutex_unlock(&uq_mgr->userq_mutex); + goto clean_doorbell; } } - /* drop this refcount during queue destroy */ - kref_init(&queue->refcount); - - /* Wait for mode-1 reset to complete */ - down_read(&adev->reset_domain->sem); + atomic_inc(&uq_mgr->userq_count[queue->queue_type]); + mutex_unlock(&uq_mgr->userq_mutex); r = xa_alloc(&uq_mgr->userq_xa, &qid, queue, - XA_LIMIT(1, AMDGPU_MAX_USERQ_COUNT), GFP_KERNEL); - if (r) { - if (!skip_map_queue) - amdgpu_userq_unmap_helper(queue); - r = -ENOMEM; - goto clean_reset_domain; - } - - r = xa_err(xa_store_irq(&adev->userq_doorbell_xa, index, queue, GFP_KERNEL)); + XA_LIMIT(1, AMDGPU_MAX_USERQ_COUNT), + GFP_KERNEL); if (r) { - xa_erase(&uq_mgr->userq_xa, qid); - if (!skip_map_queue) - amdgpu_userq_unmap_helper(queue); - goto clean_reset_domain; + /* + * This drops the last reference which should take care of + * all cleanup. + */ + amdgpu_userq_put(queue); + return r; } - up_read(&adev->reset_domain->sem); amdgpu_debugfs_userq_init(filp, queue, qid); - INIT_DELAYED_WORK(&queue->hang_detect_work, - amdgpu_userq_hang_detect_work); - args->out.queue_id = qid; - atomic_inc(&uq_mgr->userq_count[queue->queue_type]); - mutex_unlock(&uq_mgr->userq_mutex); return 0; -clean_reset_domain: - up_read(&adev->reset_domain->sem); +clean_doorbell: + xa_erase_irq(&adev->userq_doorbell_xa, index); clean_mqd: - mutex_unlock(&uq_mgr->userq_mutex); uq_funcs->mqd_destroy(queue); -clean_fence_driver: - amdgpu_userq_fence_driver_free(queue); clean_mapping: amdgpu_bo_reserve(fpriv->vm.root.bo, true); amdgpu_userq_buffer_vas_list_cleanup(adev, queue); amdgpu_bo_unreserve(fpriv->vm.root.bo); mutex_destroy(&queue->fence_drv_lock); +free_fence_drv: + amdgpu_userq_fence_driver_free(queue); free_queue: kfree(queue); err_pm_runtime: -- cgit v1.2.3 From 431e40042d3599559e588b8946bb28bd440b4f65 Mon Sep 17 00:00:00 2001 From: Caleb Sander Mateos Date: Wed, 13 May 2026 12:29:21 -0600 Subject: bio-integrity-fs: pass data iter to bio_integrity_verify() bio_integrity_verify() expects the passed struct bvec_iter to be an iterator over bio data, not integrity. So construct a separate data bvec_iter without the bio_integrity_bytes() conversion and pass it to bio_integrity_verify() instead of bip_iter. Fixes: 0bde8a12b554 ("block: add fs_bio_integrity helpers") Signed-off-by: Caleb Sander Mateos Reviewed-by: Anuj Gupta Reviewed-by: Christoph Hellwig Link: https://patch.msgid.link/20260513182924.1753582-1-csander@purestorage.com Signed-off-by: Jens Axboe --- block/bio-integrity-fs.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/block/bio-integrity-fs.c b/block/bio-integrity-fs.c index acb1e5f270d2..0daa42d9ead7 100644 --- a/block/bio-integrity-fs.c +++ b/block/bio-integrity-fs.c @@ -55,6 +55,10 @@ int fs_bio_integrity_verify(struct bio *bio, sector_t sector, unsigned int size) { struct blk_integrity *bi = blk_get_integrity(bio->bi_bdev->bd_disk); struct bio_integrity_payload *bip = bio_integrity(bio); + struct bvec_iter data_iter = { + .bi_sector = sector, + .bi_size = size, + }; /* * Reinitialize bip->bip_iter. @@ -65,7 +69,7 @@ int fs_bio_integrity_verify(struct bio *bio, sector_t sector, unsigned int size) memset(&bip->bip_iter, 0, sizeof(bip->bip_iter)); bip->bip_iter.bi_sector = sector; bip->bip_iter.bi_size = bio_integrity_bytes(bi, size >> SECTOR_SHIFT); - return blk_status_to_errno(bio_integrity_verify(bio, &bip->bip_iter)); + return blk_status_to_errno(bio_integrity_verify(bio, &data_iter)); } static int __init fs_bio_integrity_init(void) -- cgit v1.2.3 From 0701c9e17bd903d95b2ddf7dd2e1d8be5027f331 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 8 May 2026 11:18:29 +0200 Subject: x86/kvm/vmx: Move IRQ/NMI dispatch from KVM into x86 core Move the VMX interrupt dispatch magic into the x86 core code. This isolates KVM from the FRED/IDT decisions and reduces the amount of EXPORT_SYMBOL_FOR_KVM(). Suggested-by: Sean Christopherson Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Tested-by: "Verma, Vishal L" Tested-by: Zhao Liu Tested-by: Zhao Liu Tested-by: Sean Christopherson Reviewed-by: Binbin Wu Acked-by: Sean Christopherson Link: https://patch.msgid.link/20260508091829.GO3126523@noisy.programming.kicks-ass.net --- arch/x86/entry/Makefile | 2 +- arch/x86/entry/common.c | 48 +++++++++++++++++++++++++++++++++++++ arch/x86/entry/entry.S | 46 +++++++++++++++++++++++++++++++++++ arch/x86/entry/entry_64_fred.S | 1 - arch/x86/include/asm/desc.h | 4 ++++ arch/x86/include/asm/desc_defs.h | 2 +- arch/x86/include/asm/entry-common.h | 2 ++ arch/x86/include/asm/fred.h | 1 - arch/x86/kernel/idt.c | 15 ++++++++++++ arch/x86/kernel/nmi.c | 1 - arch/x86/kvm/vmx/vmenter.S | 46 ----------------------------------- arch/x86/kvm/vmx/vmx.c | 19 ++------------- 12 files changed, 119 insertions(+), 68 deletions(-) create mode 100644 arch/x86/entry/common.c diff --git a/arch/x86/entry/Makefile b/arch/x86/entry/Makefile index 72cae8e0ce85..83b4762d6ecb 100644 --- a/arch/x86/entry/Makefile +++ b/arch/x86/entry/Makefile @@ -13,7 +13,7 @@ CFLAGS_REMOVE_syscall_64.o = $(CC_FLAGS_FTRACE) CFLAGS_syscall_32.o += -fno-stack-protector CFLAGS_syscall_64.o += -fno-stack-protector -obj-y := entry.o entry_$(BITS).o syscall_$(BITS).o +obj-y := entry.o entry_$(BITS).o syscall_$(BITS).o common.o obj-y += vdso/ obj-y += vsyscall/ diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c new file mode 100644 index 000000000000..b62ac824c1e9 --- /dev/null +++ b/arch/x86/entry/common.c @@ -0,0 +1,48 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#include +#include +#include +#include + +#if IS_ENABLED(CONFIG_KVM_INTEL) +/* + * On VMX, NMIs and IRQs (as configured by KVM) are acknowledged by hardware as + * part of the VM-Exit, i.e. the event itself is consumed as part the VM-Exit. + * x86_entry_from_kvm() is invoked by KVM to effectively forward NMIs and IRQs + * to the kernel for servicing. On SVM, a.k.a. AMD, the NMI/IRQ VM-Exit is + * purely a signal that an NMI/IRQ is pending, i.e. the event that triggered + * the VM-Exit is held pending until it's unblocked in the host. + */ +noinstr void x86_entry_from_kvm(unsigned int event_type, unsigned int vector) +{ + if (event_type == EVENT_TYPE_EXTINT) { +#ifdef CONFIG_X86_64 + /* + * Use FRED dispatch, even when running IDT. The dispatch + * tables are kept in sync between FRED and IDT, and the FRED + * dispatch works well with CFI. + */ + fred_entry_from_kvm(event_type, vector); +#else + idt_entry_from_kvm(vector); +#endif + return; + } + + WARN_ON_ONCE(event_type != EVENT_TYPE_NMI); + +#ifdef CONFIG_X86_64 + if (cpu_feature_enabled(X86_FEATURE_FRED)) + return fred_entry_from_kvm(event_type, vector); +#endif + + /* + * Notably, we must use IDT dispatch for NMI when running in IDT mode. + * The FRED NMI context is significantly different and will not work + * right (specifically FRED fixed the NMI recursion issue). + */ + idt_entry_from_kvm(vector); +} +EXPORT_SYMBOL_FOR_KVM(x86_entry_from_kvm); +#endif diff --git a/arch/x86/entry/entry.S b/arch/x86/entry/entry.S index 6ba2b3adcef0..a56e043b266d 100644 --- a/arch/x86/entry/entry.S +++ b/arch/x86/entry/entry.S @@ -75,3 +75,49 @@ THUNK warn_thunk_thunk, __warn_thunk #if defined(CONFIG_STACKPROTECTOR) && defined(CONFIG_SMP) EXPORT_SYMBOL(__ref_stack_chk_guard); #endif + +#if IS_ENABLED(CONFIG_KVM_INTEL) +.macro IDT_DO_EVENT_IRQOFF call_insn call_target + /* + * Unconditionally create a stack frame, getting the correct RSP on the + * stack (for x86-64) would take two instructions anyways, and RBP can + * be used to restore RSP to make objtool happy (see below). + */ + push %_ASM_BP + mov %_ASM_SP, %_ASM_BP + +#ifdef CONFIG_X86_64 + /* + * Align RSP to a 16-byte boundary (to emulate CPU behavior) before + * creating the synthetic interrupt stack frame for the IRQ/NMI. + */ + and $-16, %rsp + push $__KERNEL_DS + push %rbp +#endif + pushf + push $__KERNEL_CS + \call_insn \call_target + + /* + * "Restore" RSP from RBP, even though IRET has already unwound RSP to + * the correct value. objtool doesn't know the callee will IRET and, + * without the explicit restore, thinks the stack is getting walloped. + * Using an unwind hint is problematic due to x86-64's dynamic alignment. + */ + leave + RET +.endm + +.pushsection .text, "ax" +SYM_FUNC_START(idt_do_interrupt_irqoff) + IDT_DO_EVENT_IRQOFF CALL_NOSPEC _ASM_ARG1 +SYM_FUNC_END(idt_do_interrupt_irqoff) +.popsection + +.pushsection .noinstr.text, "ax" +SYM_FUNC_START(idt_do_nmi_irqoff) + IDT_DO_EVENT_IRQOFF call asm_exc_nmi_kvm_vmx +SYM_FUNC_END(idt_do_nmi_irqoff) +.popsection +#endif diff --git a/arch/x86/entry/entry_64_fred.S b/arch/x86/entry/entry_64_fred.S index 894f7f16eb80..0d2768ab836c 100644 --- a/arch/x86/entry/entry_64_fred.S +++ b/arch/x86/entry/entry_64_fred.S @@ -147,5 +147,4 @@ SYM_FUNC_START(asm_fred_entry_from_kvm) RET SYM_FUNC_END(asm_fred_entry_from_kvm) -EXPORT_SYMBOL_FOR_KVM(asm_fred_entry_from_kvm); #endif diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h index ec95fe44fa3a..00aeae843529 100644 --- a/arch/x86/include/asm/desc.h +++ b/arch/x86/include/asm/desc.h @@ -438,6 +438,10 @@ extern void idt_setup_traps(void); extern void idt_setup_apic_and_irq_gates(void); extern bool idt_is_f00f_address(unsigned long address); +extern void idt_do_interrupt_irqoff(unsigned long address); +extern void idt_do_nmi_irqoff(void); +extern void idt_entry_from_kvm(unsigned int vector); + #ifdef CONFIG_X86_64 extern void idt_setup_early_pf(void); #else diff --git a/arch/x86/include/asm/desc_defs.h b/arch/x86/include/asm/desc_defs.h index 7e6b9314758a..2f2ce8aadf07 100644 --- a/arch/x86/include/asm/desc_defs.h +++ b/arch/x86/include/asm/desc_defs.h @@ -145,7 +145,7 @@ struct gate_struct { typedef struct gate_struct gate_desc; #ifndef _SETUP -static inline unsigned long gate_offset(const gate_desc *g) +static __always_inline unsigned long gate_offset(const gate_desc *g) { #ifdef CONFIG_X86_64 return g->offset_low | ((unsigned long)g->offset_middle << 16) | diff --git a/arch/x86/include/asm/entry-common.h b/arch/x86/include/asm/entry-common.h index 7535131c711b..eca24b5e07f4 100644 --- a/arch/x86/include/asm/entry-common.h +++ b/arch/x86/include/asm/entry-common.h @@ -97,4 +97,6 @@ static __always_inline void arch_exit_to_user_mode(void) } #define arch_exit_to_user_mode arch_exit_to_user_mode +extern void x86_entry_from_kvm(unsigned int entry_type, unsigned int vector); + #endif diff --git a/arch/x86/include/asm/fred.h b/arch/x86/include/asm/fred.h index 2bb65677c079..18a2f811c358 100644 --- a/arch/x86/include/asm/fred.h +++ b/arch/x86/include/asm/fred.h @@ -110,7 +110,6 @@ static __always_inline unsigned long fred_event_data(struct pt_regs *regs) { ret static inline void cpu_init_fred_exceptions(void) { } static inline void cpu_init_fred_rsps(void) { } static inline void fred_complete_exception_setup(void) { } -static inline void fred_entry_from_kvm(unsigned int type, unsigned int vector) { } static inline void fred_sync_rsp0(unsigned long rsp0) { } static inline void fred_update_rsp0(void) { } #endif /* CONFIG_X86_FRED */ diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c index 260456588756..7bcf1decc034 100644 --- a/arch/x86/kernel/idt.c +++ b/arch/x86/kernel/idt.c @@ -268,6 +268,21 @@ void __init idt_setup_early_pf(void) } #endif +#if IS_ENABLED(CONFIG_KVM_INTEL) +noinstr void idt_entry_from_kvm(unsigned int vector) +{ + if (vector == NMI_VECTOR) + return idt_do_nmi_irqoff(); + + /* + * Only the NMI path requires noinstr. + */ + instrumentation_begin(); + idt_do_interrupt_irqoff(gate_offset(idt_table + vector)); + instrumentation_end(); +} +#endif + static void __init idt_map_in_cea(void) { /* diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 3d239ed12744..52a3afb1b79e 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -614,7 +614,6 @@ DEFINE_IDTENTRY_RAW(exc_nmi_kvm_vmx) { exc_nmi(regs); } -EXPORT_SYMBOL_FOR_KVM(asm_exc_nmi_kvm_vmx); #endif #ifdef CONFIG_NMI_CHECK_CPU diff --git a/arch/x86/kvm/vmx/vmenter.S b/arch/x86/kvm/vmx/vmenter.S index 8a481dae9cae..ff1f254a0ef4 100644 --- a/arch/x86/kvm/vmx/vmenter.S +++ b/arch/x86/kvm/vmx/vmenter.S @@ -31,38 +31,6 @@ #define VCPU_R15 __VCPU_REGS_R15 * WORD_SIZE #endif -.macro VMX_DO_EVENT_IRQOFF call_insn call_target - /* - * Unconditionally create a stack frame, getting the correct RSP on the - * stack (for x86-64) would take two instructions anyways, and RBP can - * be used to restore RSP to make objtool happy (see below). - */ - push %_ASM_BP - mov %_ASM_SP, %_ASM_BP - -#ifdef CONFIG_X86_64 - /* - * Align RSP to a 16-byte boundary (to emulate CPU behavior) before - * creating the synthetic interrupt stack frame for the IRQ/NMI. - */ - and $-16, %rsp - push $__KERNEL_DS - push %rbp -#endif - pushf - push $__KERNEL_CS - \call_insn \call_target - - /* - * "Restore" RSP from RBP, even though IRET has already unwound RSP to - * the correct value. objtool doesn't know the callee will IRET and, - * without the explicit restore, thinks the stack is getting walloped. - * Using an unwind hint is problematic due to x86-64's dynamic alignment. - */ - leave - RET -.endm - .section .noinstr.text, "ax" /** @@ -320,10 +288,6 @@ SYM_INNER_LABEL_ALIGN(vmx_vmexit, SYM_L_GLOBAL) SYM_FUNC_END(__vmx_vcpu_run) -SYM_FUNC_START(vmx_do_nmi_irqoff) - VMX_DO_EVENT_IRQOFF call asm_exc_nmi_kvm_vmx -SYM_FUNC_END(vmx_do_nmi_irqoff) - #ifndef CONFIG_CC_HAS_ASM_GOTO_OUTPUT /** @@ -375,13 +339,3 @@ SYM_FUNC_START(vmread_error_trampoline) RET SYM_FUNC_END(vmread_error_trampoline) #endif - -.section .text, "ax" - -#ifndef CONFIG_X86_FRED - -SYM_FUNC_START(vmx_do_interrupt_irqoff) - VMX_DO_EVENT_IRQOFF CALL_NOSPEC _ASM_ARG1 -SYM_FUNC_END(vmx_do_interrupt_irqoff) - -#endif diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 49feecb286b2..b9103de01428 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -7117,9 +7117,6 @@ void vmx_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap) vmcs_write64(EOI_EXIT_BITMAP3, eoi_exit_bitmap[3]); } -void vmx_do_interrupt_irqoff(unsigned long entry); -void vmx_do_nmi_irqoff(void); - static void handle_nm_fault_irqoff(struct kvm_vcpu *vcpu) { /* @@ -7161,17 +7158,8 @@ static void handle_external_interrupt_irqoff(struct kvm_vcpu *vcpu, "unexpected VM-Exit interrupt info: 0x%x", intr_info)) return; - /* - * Invoke the kernel's IRQ handler for the vector. Use the FRED path - * when it's available even if FRED isn't fully enabled, e.g. even if - * FRED isn't supported in hardware, in order to avoid the indirect - * CALL in the non-FRED path. - */ kvm_before_interrupt(vcpu, KVM_HANDLING_IRQ); - if (IS_ENABLED(CONFIG_X86_FRED)) - fred_entry_from_kvm(EVENT_TYPE_EXTINT, vector); - else - vmx_do_interrupt_irqoff(gate_offset((gate_desc *)host_idt_base + vector)); + x86_entry_from_kvm(EVENT_TYPE_EXTINT, vector); kvm_after_interrupt(vcpu); vcpu->arch.at_instruction_boundary = true; @@ -7481,10 +7469,7 @@ noinstr void vmx_handle_nmi(struct kvm_vcpu *vcpu) return; kvm_before_interrupt(vcpu, KVM_HANDLING_NMI); - if (cpu_feature_enabled(X86_FEATURE_FRED)) - fred_entry_from_kvm(EVENT_TYPE_NMI, NMI_VECTOR); - else - vmx_do_nmi_irqoff(); + x86_entry_from_kvm(EVENT_TYPE_NMI, NMI_VECTOR); kvm_after_interrupt(vcpu); } -- cgit v1.2.3 From 5fcc48d521877c5d83828d715c81f4d169ef97f3 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 23 Apr 2026 17:56:13 +0200 Subject: x86/kvm/vmx: Fix VMX vs hrtimer_rearm_deferred() Vishal reported that KVM unit test 'x2apic' started failing after commit 0e98eb14814e ("entry: Prepare for deferred hrtimer rearming"). The reason is that KVM/VMX is injecting interrupts while it has interrupts disabled, for a context that will enable interrupts, this means that regs->flags.X86_EFLAGS_IF == 0 and irqentry_exit() will not do the right thing. Notably, irqentry_exit() must not call hrtimer_rearm_deferred() when the return context does not have IF set, because this will cause problems vs NMIs. Therefore, fix up the state after the injection. Fixes: 0e98eb14814e ("entry: Prepare for deferred hrtimer rearming") Reported-by: "Verma, Vishal L" Suggested-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Thomas Gleixner Tested-by: "Verma, Vishal L" Tested-by: David Woodhouse Tested-by: Zhao Liu Tested-by: Sean Christopherson Reviewed-by: Binbin Wu Link: https://patch.msgid.link/20260423155936.957351833@infradead.org Closes: https://lore.kernel.org/r/70cd3e97fbb796e2eb2ff8cd4b7614ada05a5f24.camel%40intel.com --- arch/x86/entry/common.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c index b62ac824c1e9..06c7c6ebd6f9 100644 --- a/arch/x86/entry/common.c +++ b/arch/x86/entry/common.c @@ -2,6 +2,7 @@ #include #include +#include #include #include @@ -27,6 +28,18 @@ noinstr void x86_entry_from_kvm(unsigned int event_type, unsigned int vector) #else idt_entry_from_kvm(vector); #endif + /* + * Strictly speaking, only the NMI path requires noinstr. + */ + instrumentation_begin(); + /* + * KVM/VMX will dispatch from IRQ-disabled but for a context + * that will have IRQs-enabled. This confuses the entry code + * and it will not have reprogrammed the timer. Do so now. + */ + hrtimer_rearm_deferred(); + instrumentation_end(); + return; } -- cgit v1.2.3 From c35cb4fc7231702d1e9952aec1a442f3e27df6f5 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 15 May 2026 19:03:59 +0200 Subject: ACPI: battery: Fix system wakeup on critical battery status Commit 0a869409a981 ("ACPI: battery: Convert the driver to a platform one") changed the parent of the battery wakeup source to the platform device used for driver binding, but it forgot to update the acpi_pm_wakeup_event() call in acpi_battery_update() accordingly. Do it now to unbreak waking up the system on critical battery status during suspend-to-idle and during transitions to ACPI S3/S4. Fixes: 0a869409a981 ("ACPI: battery: Convert the driver to a platform one") Signed-off-by: Rafael J. Wysocki Cc: 7.0+ # 7.0+ Link: https://patch.msgid.link/12898712.O9o76ZdvQC@rafael.j.wysocki --- drivers/acpi/battery.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index d4ae21a71007..b82dd67d98c9 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -94,6 +94,7 @@ struct acpi_battery { struct power_supply *bat; struct power_supply_desc bat_desc; struct acpi_device *device; + struct device *phys_dev; struct notifier_block pm_nb; struct list_head list; unsigned long update_time; @@ -1033,7 +1034,7 @@ static int acpi_battery_update(struct acpi_battery *battery, bool resume) if ((battery->state & ACPI_BATTERY_STATE_CRITICAL) || (test_bit(ACPI_BATTERY_ALARM_PRESENT, &battery->flags) && (battery->capacity_now <= battery->alarm))) - acpi_pm_wakeup_event(&battery->device->dev); + acpi_pm_wakeup_event(battery->phys_dev); return result; } @@ -1231,6 +1232,7 @@ static int acpi_battery_probe(struct platform_device *pdev) platform_set_drvdata(pdev, battery); + battery->phys_dev = &pdev->dev; battery->device = device; result = devm_mutex_init(&pdev->dev, &battery->update_lock); -- cgit v1.2.3 From 01f99f8c4a0adec6875f192702a57c5e88978af5 Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 13 May 2026 14:33:23 -0300 Subject: RDMA/core: Move the _ib_copy_validate_udata* functions to ib_core_uverbs It was incorrect to place them in uverbs_ioctl because that makes every driver depends on ib_uverbs.ko, which is undesired. ib_core_uverbs.c is for functions used by alot of drivers that are linked into ib_core instead. Fixes: 1de9287ece44 ("RDMA: Add ib_copy_validate_udata_in()") Link: https://patch.msgid.link/r/1-v1-045258567bd6+9fe-ib_uverbs_support_ko_jgg@nvidia.com Signed-off-by: Jason Gunthorpe --- drivers/infiniband/core/ib_core_uverbs.c | 89 ++++++++++++++++++++++ drivers/infiniband/core/uverbs.h | 35 +++++++++ drivers/infiniband/core/uverbs_ioctl.c | 122 ------------------------------- 3 files changed, 124 insertions(+), 122 deletions(-) diff --git a/drivers/infiniband/core/ib_core_uverbs.c b/drivers/infiniband/core/ib_core_uverbs.c index 1f7a5c119cc9..685030e0c60f 100644 --- a/drivers/infiniband/core/ib_core_uverbs.c +++ b/drivers/infiniband/core/ib_core_uverbs.c @@ -9,6 +9,7 @@ #include #include "uverbs.h" #include "core_priv.h" +#include "rdma_core.h" MODULE_IMPORT_NS("DMA_BUF"); @@ -416,3 +417,91 @@ struct ib_device *rdma_udata_to_dev(struct ib_udata *udata) } EXPORT_SYMBOL(rdma_udata_to_dev); +#if IS_ENABLED(CONFIG_INFINIBAND_USER_ACCESS) +uverbs_api_ioctl_handler_fn uverbs_get_handler_fn(struct ib_udata *udata) +{ + struct uverbs_attr_bundle *bundle = + rdma_udata_to_uverbs_attr_bundle(udata); + struct bundle_priv *pbundle = + container_of(&bundle->hdr, struct bundle_priv, bundle); + + lockdep_assert_held(&bundle->ufile->device->disassociate_srcu); + + return srcu_dereference(pbundle->method_elm->handler, + &bundle->ufile->device->disassociate_srcu); +} + +int _ib_copy_validate_udata_in(struct ib_udata *udata, void *req, + size_t kernel_size, size_t minimum_size) +{ + int err; + + if (udata->inlen < minimum_size) { + ibdev_dbg( + rdma_udata_to_dev(udata), + "System call driver input udata too small (%zu < %zu) for ioctl %ps called by %pSR\n", + udata->inlen, minimum_size, + uverbs_get_handler_fn(udata), + __builtin_return_address(0)); + return -EINVAL; + } + + err = copy_struct_from_user(req, kernel_size, udata->inbuf, + udata->inlen); + if (err) { + if (err == -E2BIG) { + ibdev_dbg( + rdma_udata_to_dev(udata), + "System call driver input udata not zero from %zu -> %zu for ioctl %ps called by %pSR\n", + minimum_size, udata->inlen, + uverbs_get_handler_fn(udata), + __builtin_return_address(0)); + return -EOPNOTSUPP; + } + ibdev_dbg( + rdma_udata_to_dev(udata), + "System call driver input udata EFAULT for ioctl %ps called by %pSR\n", + uverbs_get_handler_fn(udata), + __builtin_return_address(0)); + return err; + } + return 0; +} +EXPORT_SYMBOL(_ib_copy_validate_udata_in); + +int _ib_copy_validate_udata_cm_fail(struct ib_udata *udata, u64 req_cm, + u64 valid_cm) +{ + ibdev_dbg( + rdma_udata_to_dev(udata), + "System call driver input udata has unsupported comp_mask %llx & ~%llx = %llx for ioctl %ps called by %pSR\n", + req_cm, valid_cm, req_cm & ~valid_cm, + uverbs_get_handler_fn(udata), __builtin_return_address(0)); + return -EOPNOTSUPP; +} +EXPORT_SYMBOL(_ib_copy_validate_udata_cm_fail); + +int _ib_respond_udata(struct ib_udata *udata, const void *src, size_t len) +{ + size_t copy_len; + + /* 0 length copy_len is a NOP for copy_to_user() and doesn't fail. */ + copy_len = min(len, udata->outlen); + if (copy_to_user(udata->outbuf, src, copy_len)) + goto err_fault; + if (copy_len < udata->outlen) { + if (clear_user(udata->outbuf + copy_len, + udata->outlen - copy_len)) + goto err_fault; + } + return 0; +err_fault: + ibdev_dbg( + rdma_udata_to_dev(udata), + "System call driver out udata has EFAULT (%zu into %zu) for ioctl %ps called by %pSR\n", + len, udata->outlen, uverbs_get_handler_fn(udata), + __builtin_return_address(0)); + return -EFAULT; +} +EXPORT_SYMBOL(_ib_respond_udata); +#endif diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index 6d4295277e0e..a74a2dff1301 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -229,6 +229,41 @@ int uverbs_dealloc_mw(struct ib_mw *mw); void ib_uverbs_detach_umcast(struct ib_qp *qp, struct ib_uqp_object *uobj); +struct bundle_alloc_head { + struct_group_tagged(bundle_alloc_head_hdr, hdr, + struct bundle_alloc_head *next; + ); + u8 data[]; +}; + +struct bundle_priv { + /* Must be first */ + struct bundle_alloc_head_hdr alloc_head; + struct bundle_alloc_head *allocated_mem; + size_t internal_avail; + size_t internal_used; + + struct radix_tree_root *radix; + const struct uverbs_api_ioctl_method *method_elm; + void __rcu **radix_slots; + unsigned long radix_slots_len; + u32 method_key; + + struct ib_uverbs_attr __user *user_attrs; + struct ib_uverbs_attr *uattrs; + + DECLARE_BITMAP(uobj_finalize, UVERBS_API_ATTR_BKEY_LEN); + DECLARE_BITMAP(spec_finalize, UVERBS_API_ATTR_BKEY_LEN); + DECLARE_BITMAP(uobj_hw_obj_valid, UVERBS_API_ATTR_BKEY_LEN); + + /* + * Must be last. bundle ends in a flex array which overlaps + * internal_buffer. + */ + struct uverbs_attr_bundle_hdr bundle; + u64 internal_buffer[32]; +}; + long ib_uverbs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); struct ib_uverbs_flow_spec { diff --git a/drivers/infiniband/core/uverbs_ioctl.c b/drivers/infiniband/core/uverbs_ioctl.c index b61af625e679..33feb88d652b 100644 --- a/drivers/infiniband/core/uverbs_ioctl.c +++ b/drivers/infiniband/core/uverbs_ioctl.c @@ -35,54 +35,6 @@ #include "rdma_core.h" #include "uverbs.h" -struct bundle_alloc_head { - struct_group_tagged(bundle_alloc_head_hdr, hdr, - struct bundle_alloc_head *next; - ); - u8 data[]; -}; - -struct bundle_priv { - /* Must be first */ - struct bundle_alloc_head_hdr alloc_head; - struct bundle_alloc_head *allocated_mem; - size_t internal_avail; - size_t internal_used; - - struct radix_tree_root *radix; - const struct uverbs_api_ioctl_method *method_elm; - void __rcu **radix_slots; - unsigned long radix_slots_len; - u32 method_key; - - struct ib_uverbs_attr __user *user_attrs; - struct ib_uverbs_attr *uattrs; - - DECLARE_BITMAP(uobj_finalize, UVERBS_API_ATTR_BKEY_LEN); - DECLARE_BITMAP(spec_finalize, UVERBS_API_ATTR_BKEY_LEN); - DECLARE_BITMAP(uobj_hw_obj_valid, UVERBS_API_ATTR_BKEY_LEN); - - /* - * Must be last. bundle ends in a flex array which overlaps - * internal_buffer. - */ - struct uverbs_attr_bundle_hdr bundle; - u64 internal_buffer[32]; -}; - -uverbs_api_ioctl_handler_fn uverbs_get_handler_fn(struct ib_udata *udata) -{ - struct uverbs_attr_bundle *bundle = - rdma_udata_to_uverbs_attr_bundle(udata); - struct bundle_priv *pbundle = - container_of(&bundle->hdr, struct bundle_priv, bundle); - - lockdep_assert_held(&bundle->ufile->device->disassociate_srcu); - - return srcu_dereference(pbundle->method_elm->handler, - &bundle->ufile->device->disassociate_srcu); -} - /* * Each method has an absolute minimum amount of memory it needs to allocate, * precompute that amount and determine if the onstack memory can be used or @@ -860,77 +812,3 @@ void uverbs_finalize_uobj_create(const struct uverbs_attr_bundle *bundle, pbundle->uobj_hw_obj_valid); } EXPORT_SYMBOL(uverbs_finalize_uobj_create); - -int _ib_copy_validate_udata_in(struct ib_udata *udata, void *req, - size_t kernel_size, size_t minimum_size) -{ - int err; - - if (udata->inlen < minimum_size) { - ibdev_dbg( - rdma_udata_to_dev(udata), - "System call driver input udata too small (%zu < %zu) for ioctl %ps called by %pSR\n", - udata->inlen, minimum_size, - uverbs_get_handler_fn(udata), - __builtin_return_address(0)); - return -EINVAL; - } - - err = copy_struct_from_user(req, kernel_size, udata->inbuf, - udata->inlen); - if (err) { - if (err == -E2BIG) { - ibdev_dbg( - rdma_udata_to_dev(udata), - "System call driver input udata not zero from %zu -> %zu for ioctl %ps called by %pSR\n", - minimum_size, udata->inlen, - uverbs_get_handler_fn(udata), - __builtin_return_address(0)); - return -EOPNOTSUPP; - } - ibdev_dbg( - rdma_udata_to_dev(udata), - "System call driver input udata EFAULT for ioctl %ps called by %pSR\n", - uverbs_get_handler_fn(udata), - __builtin_return_address(0)); - return err; - } - return 0; -} -EXPORT_SYMBOL(_ib_copy_validate_udata_in); - -int _ib_copy_validate_udata_cm_fail(struct ib_udata *udata, u64 req_cm, - u64 valid_cm) -{ - ibdev_dbg( - rdma_udata_to_dev(udata), - "System call driver input udata has unsupported comp_mask %llx & ~%llx = %llx for ioctl %ps called by %pSR\n", - req_cm, valid_cm, req_cm & ~valid_cm, - uverbs_get_handler_fn(udata), __builtin_return_address(0)); - return -EOPNOTSUPP; -} -EXPORT_SYMBOL(_ib_copy_validate_udata_cm_fail); - -int _ib_respond_udata(struct ib_udata *udata, const void *src, size_t len) -{ - size_t copy_len; - - /* 0 length copy_len is a NOP for copy_to_user() and doesn't fail. */ - copy_len = min(len, udata->outlen); - if (copy_to_user(udata->outbuf, src, copy_len)) - goto err_fault; - if (copy_len < udata->outlen) { - if (clear_user(udata->outbuf + copy_len, - udata->outlen - copy_len)) - goto err_fault; - } - return 0; -err_fault: - ibdev_dbg( - rdma_udata_to_dev(udata), - "System call driver out udata has EFAULT (%zu into %zu) for ioctl %ps called by %pSR\n", - len, udata->outlen, uverbs_get_handler_fn(udata), - __builtin_return_address(0)); - return -EFAULT; -} -EXPORT_SYMBOL(_ib_respond_udata); -- cgit v1.2.3 From 7122ff96068a03595bde2fbafaca82ca2ed8084e Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 13 May 2026 12:00:16 -0300 Subject: RDMA/core: Do not read wild stack memory in uverbs_get_handler_fn() Sashiko points out the legacy write path in ib_uverbs_write() does allocate a struct uverbs_attr_bundle, but it doesn't wrap it in a bundle_priv so downcasting here isn't safe. Instead lift the method_elm out of the bundle_priv and use it for the debug function. The legacy write path will leave it set as NULL since the write method_elm uses a different type. Cc: stable@vger.kernel.org Fixes: 1de9287ece44 ("RDMA: Add ib_copy_validate_udata_in()") Signed-off-by: Jason Gunthorpe Signed-off-by: Leon Romanovsky --- drivers/infiniband/core/ib_core_uverbs.c | 4 +--- drivers/infiniband/core/uverbs.h | 1 - drivers/infiniband/core/uverbs_ioctl.c | 26 ++++++++++++++------------ include/rdma/uverbs_ioctl.h | 1 + 4 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/core/ib_core_uverbs.c b/drivers/infiniband/core/ib_core_uverbs.c index 685030e0c60f..8a0e6fa2a528 100644 --- a/drivers/infiniband/core/ib_core_uverbs.c +++ b/drivers/infiniband/core/ib_core_uverbs.c @@ -422,12 +422,10 @@ uverbs_api_ioctl_handler_fn uverbs_get_handler_fn(struct ib_udata *udata) { struct uverbs_attr_bundle *bundle = rdma_udata_to_uverbs_attr_bundle(udata); - struct bundle_priv *pbundle = - container_of(&bundle->hdr, struct bundle_priv, bundle); lockdep_assert_held(&bundle->ufile->device->disassociate_srcu); - return srcu_dereference(pbundle->method_elm->handler, + return srcu_dereference(bundle->method_elm->handler, &bundle->ufile->device->disassociate_srcu); } diff --git a/drivers/infiniband/core/uverbs.h b/drivers/infiniband/core/uverbs.h index a74a2dff1301..f2e192b51e60 100644 --- a/drivers/infiniband/core/uverbs.h +++ b/drivers/infiniband/core/uverbs.h @@ -244,7 +244,6 @@ struct bundle_priv { size_t internal_used; struct radix_tree_root *radix; - const struct uverbs_api_ioctl_method *method_elm; void __rcu **radix_slots; unsigned long radix_slots_len; u32 method_key; diff --git a/drivers/infiniband/core/uverbs_ioctl.c b/drivers/infiniband/core/uverbs_ioctl.c index 33feb88d652b..2552a7efe2fb 100644 --- a/drivers/infiniband/core/uverbs_ioctl.c +++ b/drivers/infiniband/core/uverbs_ioctl.c @@ -397,13 +397,13 @@ static int ib_uverbs_run_method(struct bundle_priv *pbundle, struct uverbs_attr_bundle *bundle = container_of(&pbundle->bundle, struct uverbs_attr_bundle, hdr); size_t uattrs_size = array_size(sizeof(*pbundle->uattrs), num_attrs); - unsigned int destroy_bkey = pbundle->method_elm->destroy_bkey; + unsigned int destroy_bkey = bundle->method_elm->destroy_bkey; unsigned int i; int ret; /* See uverbs_disassociate_api() */ handler = srcu_dereference( - pbundle->method_elm->handler, + bundle->method_elm->handler, &pbundle->bundle.ufile->device->disassociate_srcu); if (!handler) return -EIO; @@ -421,12 +421,12 @@ static int ib_uverbs_run_method(struct bundle_priv *pbundle, } /* User space did not provide all the mandatory attributes */ - if (unlikely(!bitmap_subset(pbundle->method_elm->attr_mandatory, + if (unlikely(!bitmap_subset(bundle->method_elm->attr_mandatory, pbundle->bundle.attr_present, - pbundle->method_elm->key_bitmap_len))) + bundle->method_elm->key_bitmap_len))) return -EINVAL; - if (pbundle->method_elm->has_udata) + if (bundle->method_elm->has_udata) uverbs_fill_udata(bundle, &pbundle->bundle.driver_udata, UVERBS_ATTR_UHW_IN, UVERBS_ATTR_UHW_OUT); else @@ -451,7 +451,7 @@ static int ib_uverbs_run_method(struct bundle_priv *pbundle, * assume that the driver wrote to its UHW_OUT and flag userspace * appropriately. */ - if (!ret && pbundle->method_elm->has_udata) { + if (!ret && bundle->method_elm->has_udata) { const struct uverbs_attr *attr = uverbs_attr_get(bundle, UVERBS_ATTR_UHW_OUT); @@ -472,7 +472,7 @@ static int ib_uverbs_run_method(struct bundle_priv *pbundle, static void bundle_destroy(struct bundle_priv *pbundle, bool commit) { - unsigned int key_bitmap_len = pbundle->method_elm->key_bitmap_len; + unsigned int key_bitmap_len = pbundle->bundle.method_elm->key_bitmap_len; struct uverbs_attr_bundle *bundle = container_of(&pbundle->bundle, struct uverbs_attr_bundle, hdr); struct bundle_alloc_head *memblock; @@ -560,7 +560,7 @@ static int ib_uverbs_cmd_verbs(struct ib_uverbs_file *ufile, } /* Space for the pbundle->bundle.attrs flex array */ - pbundle->method_elm = method_elm; + pbundle->bundle.method_elm = method_elm; pbundle->method_key = attrs_iter.index; pbundle->bundle.ufile = ufile; pbundle->bundle.context = NULL; /* only valid if bundle has uobject */ @@ -569,10 +569,12 @@ static int ib_uverbs_cmd_verbs(struct ib_uverbs_file *ufile, pbundle->radix_slots_len = radix_tree_chunk_size(&attrs_iter); pbundle->user_attrs = user_attrs; - pbundle->internal_used = ALIGN(pbundle->method_elm->key_bitmap_len * - sizeof(*container_of(&pbundle->bundle, - struct uverbs_attr_bundle, hdr)->attrs), - sizeof(*pbundle->internal_buffer)); + pbundle->internal_used = ALIGN( + pbundle->bundle.method_elm->key_bitmap_len * + sizeof(*container_of(&pbundle->bundle, + struct uverbs_attr_bundle, hdr) + ->attrs), + sizeof(*pbundle->internal_buffer)); memset(pbundle->bundle.attr_present, 0, sizeof(pbundle->bundle.attr_present)); memset(pbundle->uobj_finalize, 0, sizeof(pbundle->uobj_finalize)); diff --git a/include/rdma/uverbs_ioctl.h b/include/rdma/uverbs_ioctl.h index e2af17da3e32..c89428030d61 100644 --- a/include/rdma/uverbs_ioctl.h +++ b/include/rdma/uverbs_ioctl.h @@ -635,6 +635,7 @@ struct uverbs_attr_bundle { struct ib_uverbs_file *ufile; struct ib_ucontext *context; struct ib_uobject *uobject; + const struct uverbs_api_ioctl_method *method_elm; DECLARE_BITMAP(attr_present, UVERBS_API_ATTR_BKEY_LEN); ); struct uverbs_attr attrs[]; -- cgit v1.2.3 From c9a40f6531b81baa9619bcc2697ff86896afcce7 Mon Sep 17 00:00:00 2001 From: Shiraz Saleem Date: Tue, 12 May 2026 02:42:09 -0700 Subject: RDMA/mana_ib: Report max_msg_sz in mana_ib_query_port Report max_msg_sz for mana_ib, which is 16MB. Fixes: 4bda1d5332ec ("RDMA/mana_ib: Implement port parameters") Signed-off-by: Shiraz Saleem Signed-off-by: Konstantin Taranov Link: https://patch.msgid.link/20260512094209.264955-1-kotaranov@linux.microsoft.com Reviewed-by: Long Li Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/mana/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/hw/mana/main.c b/drivers/infiniband/hw/mana/main.c index ac5e75dd3494..afc2fc124fee 100644 --- a/drivers/infiniband/hw/mana/main.c +++ b/drivers/infiniband/hw/mana/main.c @@ -606,6 +606,7 @@ int mana_ib_query_port(struct ib_device *ibdev, u32 port, if (mana_ib_is_rnic(dev)) { props->gid_tbl_len = 16; props->ip_gids = true; + props->max_msg_sz = SZ_16M; if (port == 1) props->port_cap_flags = IB_PORT_CM_SUP; } -- cgit v1.2.3 From 5b74373390113fba798a76b483837029ab010fef Mon Sep 17 00:00:00 2001 From: Guangshuo Li Date: Thu, 14 May 2026 19:38:34 +0800 Subject: RDMA/rtrs: Fix use-after-free in path file creation cleanup In the error path of rtrs_srv_create_path_files(), the sysfs root folders may already have been created and srv_path->kobj may already have been initialized. If a later step fails, the cleanup currently calls kobject_put(&srv_path->kobj) before rtrs_srv_destroy_once_sysfs_root_folders(srv_path). kobject_put() may drop the last reference to srv_path->kobj and invoke the release callback, rtrs_srv_release(), which frees srv_path. The following call to rtrs_srv_destroy_once_sysfs_root_folders(srv_path) then dereferences srv_path internally to access srv_path->srv, resulting in a use-after-free. This failure path is reached before rtrs_srv_create_path_files() returns success, so the successful-path lifetime handling is not involved. Fix this by destroying the sysfs root folders before calling kobject_put(&srv_path->kobj), so srv_path is still valid while the helper accesses it. This issue was found by a static analysis tool I am developing. Fixes: ae4c81644e91 ("RDMA/rtrs-srv: Rename rtrs_srv_sess to rtrs_srv_path") Signed-off-by: Guangshuo Li Link: https://patch.msgid.link/20260514113834.865530-1-lgs201920130244@gmail.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/ulp/rtrs/rtrs-srv-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/ulp/rtrs/rtrs-srv-sysfs.c b/drivers/infiniband/ulp/rtrs/rtrs-srv-sysfs.c index 51727c7d710c..9dd9141c86a5 100644 --- a/drivers/infiniband/ulp/rtrs/rtrs-srv-sysfs.c +++ b/drivers/infiniband/ulp/rtrs/rtrs-srv-sysfs.c @@ -295,8 +295,8 @@ remove_group: put_kobj: kobject_del(&srv_path->kobj); destroy_root: - kobject_put(&srv_path->kobj); rtrs_srv_destroy_once_sysfs_root_folders(srv_path); + kobject_put(&srv_path->kobj); return err; } -- cgit v1.2.3 From 33d35975cbead3fa6b738ee57e5e45e14fbe0886 Mon Sep 17 00:00:00 2001 From: Jonas Jelonek Date: Fri, 15 May 2026 14:31:03 +0000 Subject: net: pse-pd: fix sign on -ENOENT check in of_load_pse_pis() of_count_phandle_with_args() returns the count on success and a negative errno on failure, including -ENOENT when the "pairsets" property is absent. The existing comparison in of_load_pse_pis() checks against ENOENT (positive 2) instead of -ENOENT, so the branch is taken for any error return: legitimate DTs that omit "pairsets" trigger a spurious "wrong number of pairsets" error and probe fails with -EINVAL. Compare against -ENOENT so a missing "pairsets" property is correctly treated as "this PI has no pairsets, continue". Fixes: 9be9567a7c59 ("net: pse-pd: Add support for PSE PIs") Cc: stable@vger.kernel.org Signed-off-by: Jonas Jelonek Acked-by: Oleksij Rempel Link: https://patch.msgid.link/20260515143103.1721888-1-jelonek.jonas@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/pse-pd/pse_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pse-pd/pse_core.c b/drivers/net/pse-pd/pse_core.c index 87aa4f4e9724..69dbdbde9d71 100644 --- a/drivers/net/pse-pd/pse_core.c +++ b/drivers/net/pse-pd/pse_core.c @@ -210,7 +210,7 @@ static int of_load_pse_pis(struct pse_controller_dev *pcdev) ret = of_load_pse_pi_pairsets(node, &pi, ret); if (ret) goto out; - } else if (ret != ENOENT) { + } else if (ret != -ENOENT) { dev_err(pcdev->dev, "error: wrong number of pairsets. Should be 1 or 2, got %d (%pOF)\n", ret, node); -- cgit v1.2.3 From 9b244c242bec48b37e82b89787afd6a4c43457e1 Mon Sep 17 00:00:00 2001 From: Dawei Feng Date: Fri, 15 May 2026 23:18:26 +0800 Subject: octeontx2-pf: avoid double free of pool->stack on AQ init failure otx2_pool_aq_init() frees pool->stack when mailbox sync or retry allocation fails, but leaves the pointer unchanged. Later, otx2_sq_aura_pool_init() unwinds the partial setup through otx2_aura_pool_free(), which frees pool->stack again. The CN20K-specific cn20k_pool_aq_init() implementation has the same bug in its corresponding error path. Set pool->stack to NULL immediately after the local free so the shared cleanup path does not free the same stack again while cleaning up partially initialized pool state. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime validation was not performed because reproducing this path requires OcteonTX2/CN20K hardware. Fixes: caa2da34fd25 ("octeontx2-pf: Initialize and config queues") Fixes: d322fbd17203 ("octeontx2-pf: Initialize cn20k specific aura and pool contexts") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260515151826.1005397-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c | 2 ++ drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c index a5a8f4558717..dbf173196608 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn20k.c @@ -619,11 +619,13 @@ static int cn20k_pool_aq_init(struct otx2_nic *pfvf, u16 pool_id, err = otx2_sync_mbox_msg(&pfvf->mbox); if (err) { qmem_free(pfvf->dev, pool->stack); + pool->stack = NULL; return err; } aq = otx2_mbox_alloc_msg_npa_cn20k_aq_enq(&pfvf->mbox); if (!aq) { qmem_free(pfvf->dev, pool->stack); + pool->stack = NULL; return -ENOMEM; } } diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c index 971fcab1c248..3d253132a17f 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c @@ -1482,11 +1482,13 @@ int otx2_pool_aq_init(struct otx2_nic *pfvf, u16 pool_id, err = otx2_sync_mbox_msg(&pfvf->mbox); if (err) { qmem_free(pfvf->dev, pool->stack); + pool->stack = NULL; return err; } aq = otx2_mbox_alloc_msg_npa_aq_enq(&pfvf->mbox); if (!aq) { qmem_free(pfvf->dev, pool->stack); + pool->stack = NULL; return -ENOMEM; } } -- cgit v1.2.3 From 4df78ff02629c7729168f0696a7a2123c389818d Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Sun, 17 May 2026 15:11:21 +0300 Subject: bridge: mcast: Fix a possible use-after-free when removing a bridge port When per-VLAN multicast snooping is enabled, the bridge iterates over all the bridge ports, disables the per-port multicast context on each port and enables the per-{port, VLAN} multicast contexts instead. The reverse happens when per-VLAN multicast snooping is disabled. When global multicast snooping is enabled, the bridge iterates over all the bridge ports and enables the per-port multicast context on each port. The reverse happens when multicast snooping is disabled. The above scheme can result in a situation where both types of contexts (per-port and per-{port, VLAN}) are enabled on a single bridge port: # ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 # ip link add name dummy1 up master br1 type dummy # ip link set dev br1 type bridge mcast_vlan_snooping 1 # ip link set dev br1 type bridge mcast_snooping 0 # ip link set dev br1 type bridge mcast_snooping 1 This is not intended and it is a problem since the commit cited below. Prior to this commit, when removing a bridge port, br_multicast_disable_port() would disable the per-port multicast context and the per-{port, VLAN} multicast contexts would get disabled when flushing VLANs. After this commit, br_multicast_disable_port() only disables the per-port multicast context if per-VLAN multicast snooping is disabled. If both types of contexts were enabled on the port when it was removed, the per-port multicast context would remain enabled when freeing the bridge port, leading to a use-after-free [1]. Fix by preventing the bridge from enabling / disabling the per-port multicast contexts when toggling global multicast snooping if per-VLAN multicast snooping is enabled. [1] ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0 [...] Call Trace: __debug_check_no_obj_freed (lib/debugobjects.c:1116) kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565) kobject_cleanup (lib/kobject.c:689) rcu_do_batch (kernel/rcu/tree.c:2617) rcu_core (kernel/rcu/tree.c:2869) handle_softirqs (kernel/softirq.c:622) __irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735) irq_exit_rcu (kernel/softirq.c:752) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47)) Fixes: 4b30ae9adb04 ("net: bridge: mcast: re-implement br_multicast_{enable, disable}_port functions") Reported-by: syzbot+ae231e0552fa77b26ea1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/87qznowlfs.ffs@tglx/ Reported-by: Thomas Gleixner Acked-by: Nikolay Aleksandrov Signed-off-by: Ido Schimmel Link: https://patch.msgid.link/20260517121122.188333-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski --- net/bridge/br_multicast.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 881d866d687a..2eef4f3345cd 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -4640,10 +4640,24 @@ static void br_multicast_start_querier(struct net_bridge_mcast *brmctx, rcu_read_unlock(); } -static void br_multicast_del_grps(struct net_bridge *br) +static void br_multicast_enable_all_ports(struct net_bridge *br) { struct net_bridge_port *port; + if (br_opt_get(br, BROPT_MCAST_VLAN_SNOOPING_ENABLED)) + return; + + list_for_each_entry(port, &br->port_list, list) + __br_multicast_enable_port_ctx(&port->multicast_ctx); +} + +static void br_multicast_disable_all_ports(struct net_bridge *br) +{ + struct net_bridge_port *port; + + if (br_opt_get(br, BROPT_MCAST_VLAN_SNOOPING_ENABLED)) + return; + list_for_each_entry(port, &br->port_list, list) __br_multicast_disable_port_ctx(&port->multicast_ctx); } @@ -4651,7 +4665,6 @@ static void br_multicast_del_grps(struct net_bridge *br) int br_multicast_toggle(struct net_bridge *br, unsigned long val, struct netlink_ext_ack *extack) { - struct net_bridge_port *port; bool change_snoopers = false; int err = 0; @@ -4668,7 +4681,7 @@ int br_multicast_toggle(struct net_bridge *br, unsigned long val, br_opt_toggle(br, BROPT_MULTICAST_ENABLED, !!val); if (!br_opt_get(br, BROPT_MULTICAST_ENABLED)) { change_snoopers = true; - br_multicast_del_grps(br); + br_multicast_disable_all_ports(br); goto unlock; } @@ -4676,8 +4689,7 @@ int br_multicast_toggle(struct net_bridge *br, unsigned long val, goto unlock; br_multicast_open(br); - list_for_each_entry(port, &br->port_list, list) - __br_multicast_enable_port_ctx(&port->multicast_ctx); + br_multicast_enable_all_ports(br); change_snoopers = true; -- cgit v1.2.3 From ae743a8ca8dbd66fb67c461a27460b2b21c376ab Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Sun, 17 May 2026 15:11:22 +0300 Subject: selftests: bridge_vlan_mcast: Test toggling of multicast snooping Test toggling of multicast snooping when per-VLAN multicast snooping is enabled. The test always passes, but without "bridge: mcast: Fix possible use-after-free when removing a bridge port" it results in a splat. Acked-by: Nikolay Aleksandrov Signed-off-by: Ido Schimmel Link: https://patch.msgid.link/20260517121122.188333-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski --- .../selftests/net/forwarding/bridge_vlan_mcast.sh | 30 +++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh b/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh index e8031f68200a..ebdb4c790a5d 100755 --- a/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh +++ b/tools/testing/selftests/net/forwarding/bridge_vlan_mcast.sh @@ -4,7 +4,7 @@ ALL_TESTS="vlmc_control_test vlmc_querier_test vlmc_igmp_mld_version_test \ vlmc_last_member_test vlmc_startup_query_test vlmc_membership_test \ vlmc_querier_intvl_test vlmc_query_intvl_test vlmc_query_response_intvl_test \ - vlmc_router_port_test vlmc_filtering_test" + vlmc_router_port_test vlmc_filtering_test vlmc_mcast_toggle_test" NUM_NETIFS=4 CHECK_TC="yes" TEST_GROUP="239.10.10.10" @@ -537,6 +537,34 @@ vlmc_filtering_test() log_test "Disable multicast vlan snooping when vlan filtering is disabled" } +vlmc_mcast_toggle_test() +{ + RET=0 + + ip link add name br1-mcast up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1 + ip link add name dummy1-mcast up master br1-mcast type dummy + + # Enabling per-VLAN multicast snooping should disable the per-port + # multicast context on "dummy1-mcast". + ip link set dev br1-mcast type bridge mcast_vlan_snooping 1 + + # Toggling multicast snooping on the bridge should not affect the + # per-port multicast context on "dummy1-mcast" given that per-VLAN + # multicast snooping is enabled. + ip link set dev br1-mcast type bridge mcast_snooping 0 + ip link set dev br1-mcast type bridge mcast_snooping 1 + + # If both the per-port and per-{port, VLAN} multicast contexts are + # enabled on "dummy1-mcast", removing it from the bridge will result + # in a splat. + ip link set dev dummy1-mcast nomaster + + log_test "Toggling mcast snooping with per-VLAN mcast snooping enabled" + + ip link del dev dummy1-mcast + ip link del dev br1-mcast +} + trap cleanup EXIT setup_prepare -- cgit v1.2.3 From 960e77ce14a83ef7f226e8e4b4d75765633ba48b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Nerijus=20Bend=C5=BEi=C5=ABnas?= Date: Sat, 16 May 2026 18:02:51 +0300 Subject: net: phy: skip EEE advertisement write when autoneg is disabled MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit genphy_c45_an_config_eee_aneg() writes the EEE advertisement to the auto-negotiation device's MMD register space (MDIO_MMD_AN, register MDIO_AN_EEE_ADV). These registers are read by the link partner only during auto-negotiation, so writing them while autoneg is disabled cannot influence the link. On some PHYs (e.g. Broadcom BCM54213PE) the write nevertheless reaches the chip and disturbs the receive datapath. Concretely, running ethtool -s eth0 speed 100 duplex full autoneg off ethtool --set-eee eth0 eee off leaves eth0 with TX working and RX completely silent on a Raspberry Pi 4 / CM4 board (bcmgenet + BCM54213PE in rgmii-rxid). Switching back to autoneg recovers the link. Prior to commit f26a29a038ee ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled"), the disable path was effectively a no-op because the helper read the stale eee_cfg.eee_enabled, so the underlying PHY behavior never surfaced. Bisected on rpi-6.12.y between commits 83943264 (good) and effcbc88 (bad) to f26a29a038ee. Fixes: f26a29a038ee ("net: phy: ensure that genphy_c45_an_config_eee_aneg() sees new value of phydev->eee_cfg.eee_enabled") Cc: stable@vger.kernel.org Signed-off-by: Nerijus Bendžiūnas Reviewed-by: Nicolai Buchwitz Tested-by: Nicolai Buchwitz Link: https://patch.msgid.link/20260516150251.879680-1-nerijus.bendziunas@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/phy/phy-c45.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c index d48aa7231b37..126951741428 100644 --- a/drivers/net/phy/phy-c45.c +++ b/drivers/net/phy/phy-c45.c @@ -940,6 +940,14 @@ EXPORT_SYMBOL_GPL(genphy_c45_read_eee_abilities); */ int genphy_c45_an_config_eee_aneg(struct phy_device *phydev) { + /* Writing MMD AN advertisements while autoneg is disabled has no + * effect on link-partner negotiation, but on some PHYs (e.g. the + * Broadcom BCM54213PE) the write itself disturbs the receive + * datapath. Skip it. + */ + if (phydev->autoneg == AUTONEG_DISABLE) + return 0; + if (!phydev->eee_cfg.eee_enabled) { __ETHTOOL_DECLARE_LINK_MODE_MASK(adv) = {}; -- cgit v1.2.3 From 3655063e083889ed4b79b7dda9cec65478dce09a Mon Sep 17 00:00:00 2001 From: Nicolai Buchwitz Date: Mon, 18 May 2026 10:23:09 +0200 Subject: net: phy: honor eee_disabled_modes in phy_support_eee() phy_support_eee() copies supported_eee into advertising_eee unconditionally, overwriting any filtering applied during phy_probe() based on DT eee-broken-* properties or driver-populated eee_disabled_modes. MAC drivers that call phy_support_eee() after probe (e.g. bcmgenet, fec, lan743x, lan78xx, r8169) then cause the PHY to advertise EEE for modes the user marked as broken. The symptom is that ethtool --show-eee on the local interface reports "not supported" (supported & ~eee_disabled_modes is empty) while the link partner sees EEE negotiated and active. phy_probe() already filters advertising_eee via eee_disabled_modes after calling of_set_phy_eee_broken(). Apply the same mask in phy_support_eee() so the filtering survives the copy. Fixes: 49168d1980e2 ("net: phy: Add phy_support_eee() indicating MAC support EEE") Signed-off-by: Nicolai Buchwitz Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-1-05b52626fa68@tipi-net.de Signed-off-by: Jakub Kicinski --- drivers/net/phy/phy_device.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index c2cdf1ae3542..83b074bc4a8f 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -2903,7 +2903,8 @@ EXPORT_SYMBOL_GPL(phy_advertise_eee_all); */ void phy_support_eee(struct phy_device *phydev) { - linkmode_copy(phydev->advertising_eee, phydev->supported_eee); + linkmode_andnot(phydev->advertising_eee, phydev->supported_eee, + phydev->eee_disabled_modes); phydev->eee_cfg.tx_lpi_enabled = true; phydev->eee_cfg.eee_enabled = true; -- cgit v1.2.3 From 8baa7506d793f0636e3f6f01b01ef7be19674d06 Mon Sep 17 00:00:00 2001 From: Nicolai Buchwitz Date: Mon, 18 May 2026 10:23:10 +0200 Subject: net: phy: honor eee_disabled_modes in phy_advertise_eee_all() phy_advertise_eee_all() copies supported_eee into advertising_eee unconditionally, overwriting any filtering applied during phy_probe() based on DT eee-broken-* properties or driver-populated eee_disabled_modes. genphy_c45_ethtool_set_eee() calls this helper when user space passes an empty advertisement, undoing the filtering. Apply the same eee_disabled_modes mask in phy_advertise_eee_all() so the filtering survives the copy, matching the pattern in phy_probe() and phy_support_eee(). Fixes: b64691274f5d ("net: phy: add helper phy_advertise_eee_all") Signed-off-by: Nicolai Buchwitz Reviewed-by: Andrew Lunn Link: https://patch.msgid.link/20260518-devel-phy-support-eee-fix-v2-2-05b52626fa68@tipi-net.de Signed-off-by: Jakub Kicinski --- drivers/net/phy/phy_device.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 83b074bc4a8f..3370eb822017 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -2877,7 +2877,8 @@ EXPORT_SYMBOL(phy_advertise_supported); */ void phy_advertise_eee_all(struct phy_device *phydev) { - linkmode_copy(phydev->advertising_eee, phydev->supported_eee); + linkmode_andnot(phydev->advertising_eee, phydev->supported_eee, + phydev->eee_disabled_modes); } EXPORT_SYMBOL_GPL(phy_advertise_eee_all); -- cgit v1.2.3 From d4ea0dfd75011b78cebf3808f98ac4c4f51a6fb9 Mon Sep 17 00:00:00 2001 From: Justin Iurman Date: Sun, 17 May 2026 20:30:59 +0200 Subject: ipv6: ioam: add NULL check for idev in ipv6_hop_ioam() Reported by Sashiko: The function ipv6_hop_ioam() accesses __in6_dev_get(skb->dev)->cnf.ioam6_enabled without validating the returned idev pointer. Because addrconf_ifdown() can concurrently clear dev->ip6_ptr via RCU, __in6_dev_get() can return NULL during interface teardown, which could cause a NULL pointer dereference when processing an IOAM Hop-by-Hop option. Let's add a check and use SKB_DROP_REASON_IPV6DISABLED accordingly. Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace") Cc: stable@vger.kernel.org Signed-off-by: Justin Iurman Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260517183059.29140-1-justin.iurman@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv6/exthdrs.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c index 03cbce842c1a..47c5502a34a2 100644 --- a/net/ipv6/exthdrs.c +++ b/net/ipv6/exthdrs.c @@ -910,16 +910,27 @@ static bool ipv6_hop_ra(struct sk_buff *skb, int optoff) static bool ipv6_hop_ioam(struct sk_buff *skb, int optoff) { + enum skb_drop_reason drop_reason; struct ioam6_trace_hdr *trace; struct ioam6_namespace *ns; + struct inet6_dev *idev; struct ioam6_hdr *hdr; + drop_reason = SKB_DROP_REASON_IP_INHDR; + /* Bad alignment (must be 4n-aligned) */ if (optoff & 3) goto drop; + /* Does the device still have IPv6 configuration? */ + idev = __in6_dev_get(skb->dev); + if (!idev) { + drop_reason = SKB_DROP_REASON_IPV6DISABLED; + goto drop; + } + /* Ignore if IOAM is not enabled on ingress */ - if (!READ_ONCE(__in6_dev_get(skb->dev)->cnf.ioam6_enabled)) + if (!READ_ONCE(idev->cnf.ioam6_enabled)) goto ignore; /* Truncated Option header */ @@ -972,7 +983,7 @@ ignore: return true; drop: - kfree_skb_reason(skb, SKB_DROP_REASON_IP_INHDR); + kfree_skb_reason(skb, drop_reason); return false; } -- cgit v1.2.3 From be309f8eae8b474a4a617eaae01324da996fc719 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Mon, 18 May 2026 18:51:30 +0200 Subject: af_unix: Fix UAF read of tail->len in unix_stream_data_wait() unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without holding any lock that prevents SKBs on that queue from being dequeued and freed. This has been the case since commit 79f632c71bea ("unix/stream: fix peeking with an offset larger than data in queue"). The first consequence of this is that the pointer comparison `tail != last` can be false even if `last` semantically refers to an already-freed SKB while `tail` is a new SKB allocated at the same address; which can cause unix_stream_data_wait() to wrongly keep blocking after new data has arrived, but only in a weird scenario where a peeking recv() and a normal recv() on the same socket are racing, which is probably not a real problem. But since commit 2b514574f7e8 ("net: af_unix: implement splice for stream af_unix sockets"), `tail` is actually dereferenced, which can cause UAF in the following race scenario (where test_setup() runs single-threaded, and afterwards, test_thread1() and test_thread2() run concurrently in two threads: ``` static int socks[2]; void test_setup(void) { socketpair(AF_UNIX, SOCK_STREAM, 0, socks); send(socks[1], "A", 1, 0); int peekoff = 1; setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff)); } void test_thread1(void) { char dummy; recv(socks[0], &dummy, 1, MSG_PEEK); } void test_thread2(void) { char dummy; recv(socks[0], &dummy, 1, 0); shutdown(socks[1], SHUT_WR); } ``` when racing like this: ``` thread1 thread2 unix_stream_read_generic mutex_lock(&u->iolock) skb_peek(&sk->sk_receive_queue) skb_peek_next(skb, &sk->sk_receive_queue) mutex_unlock(&u->iolock) unix_stream_read_generic unix_state_lock(sk) skb_peek(&sk->sk_receive_queue) unix_state_unlock(sk) unix_stream_data_wait unix_state_lock(sk) tail = skb_peek_tail(&sk->sk_receive_queue) spin_lock(&sk->sk_receive_queue.lock) __skb_unlink(skb, &sk->sk_receive_queue) spin_unlock(&sk->sk_receive_queue.lock) consume_skb(skb) [frees the SKB] `tail != last`: false `tail`: true `tail->len != last_len` ***UAF*** ``` Fix the UAF by removing the read of tail->len; checking tail->len would only make sense if SKBs in the receive queue of a UNIX socket could grow, which can no longer happen. Kuniyuki explained: > When commit 869e7c62486e ("net: af_unix: implement stream sendpage > support") added sendpage() support, data could be appended to the last > skb in the receiver's queue. > > That's why we needed to check if the length of the last skb was changed > while waiting for new data in unix_stream_data_wait(). > > However, commit a0dbf5f818f9 ("af_unix: Support MSG_SPLICE_PAGES") and > commit 57d44a354a43 ("unix: Convert unix_stream_sendpage() to use > MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added > to a new skb. That means this fix is not suitable for kernels before 6.5. Fixes: 2b514574f7e8 ("net: af_unix: implement splice for stream af_unix sockets") Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Jann Horn Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260518-b4-unix-recv-wait-hotfix-v2-1-83e29ce8ad31@google.com Signed-off-by: Jakub Kicinski --- net/unix/af_unix.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 1cbf36ea043b..dc71ed79be4a 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2711,8 +2711,7 @@ static int unix_read_skb(struct sock *sk, skb_read_actor_t recv_actor) * Sleep until more data has arrived. But check for races.. */ static long unix_stream_data_wait(struct sock *sk, long timeo, - struct sk_buff *last, unsigned int last_len, - bool freezable) + struct sk_buff *last, bool freezable) { unsigned int state = TASK_INTERRUPTIBLE | freezable * TASK_FREEZABLE; struct sk_buff *tail; @@ -2725,7 +2724,6 @@ static long unix_stream_data_wait(struct sock *sk, long timeo, tail = skb_peek_tail(&sk->sk_receive_queue); if (tail != last || - (tail && tail->len != last_len) || sk->sk_err || (sk->sk_shutdown & RCV_SHUTDOWN) || signal_pending(current) || @@ -2921,7 +2919,6 @@ static int unix_stream_read_generic(struct unix_stream_read_state *state, int flags = state->flags; bool check_creds = false; struct scm_cookie scm; - unsigned int last_len; struct unix_sock *u; int copied = 0; int err = 0; @@ -2967,7 +2964,6 @@ redo: goto unlock; } last = skb = skb_peek(&sk->sk_receive_queue); - last_len = last ? last->len : 0; again: #if IS_ENABLED(CONFIG_AF_UNIX_OOB) @@ -3001,8 +2997,7 @@ again: mutex_unlock(&u->iolock); - timeo = unix_stream_data_wait(sk, timeo, last, - last_len, freezable); + timeo = unix_stream_data_wait(sk, timeo, last, freezable); if (signal_pending(current)) { err = sock_intr_errno(timeo); @@ -3019,7 +3014,6 @@ unlock: while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); last = skb; - last_len = skb->len; skb = skb_peek_next(skb, &sk->sk_receive_queue); if (!skb) goto again; @@ -3094,7 +3088,6 @@ unlock: skip = 0; last = skb; - last_len = skb->len; unix_state_lock(sk); skb = skb_peek_next(skb, &sk->sk_receive_queue); if (skb) -- cgit v1.2.3 From 0cb5a74faa3bdcfa3b18735d554e12c0f615e35d Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Mon, 18 May 2026 15:44:57 +0200 Subject: net: airoha: Fix NPU RX DMA descriptor bits In an internal review from Airoha, it was notice that the RX DMA descriptor bits and mask are wrong. These values probably refer to an old NPU firmware never published. The previous value works correctly but it was reported that in some specific condition in mixed scenario with both Ethernet and WiFi offload it's possible that RX DMA descriptor signal wrong value with the problem to the RX ring or packets getting dropped. To handle these specific scenario, apply the new suggested bits mask from Airoha. Correct functionality of both AN7581 NPU and MT7996 variant were verified and confirmed working. Fixes: a7fc8c641cab ("net: airoha: Fix npu rx DMA definitions") Signed-off-by: Christian Marangi Acked-by: Lorenzo Bianconi Link: https://patch.msgid.link/20260518134530.3683-1-ansuelsmth@gmail.com Signed-off-by: Jakub Kicinski --- include/linux/soc/airoha/airoha_offload.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/soc/airoha/airoha_offload.h b/include/linux/soc/airoha/airoha_offload.h index d01ef4a6b3d7..7589fccfeef6 100644 --- a/include/linux/soc/airoha/airoha_offload.h +++ b/include/linux/soc/airoha/airoha_offload.h @@ -71,9 +71,9 @@ static inline void airoha_ppe_dev_check_skb(struct airoha_ppe_dev *dev, #define NPU_RX1_DESC_NUM 512 /* CTRL */ -#define NPU_RX_DMA_DESC_LAST_MASK BIT(27) -#define NPU_RX_DMA_DESC_LEN_MASK GENMASK(26, 14) -#define NPU_RX_DMA_DESC_CUR_LEN_MASK GENMASK(13, 1) +#define NPU_RX_DMA_DESC_LAST_MASK BIT(29) +#define NPU_RX_DMA_DESC_LEN_MASK GENMASK(28, 15) +#define NPU_RX_DMA_DESC_CUR_LEN_MASK GENMASK(14, 1) #define NPU_RX_DMA_DESC_DONE_MASK BIT(0) /* INFO */ #define NPU_RX_DMA_PKT_COUNT_MASK GENMASK(31, 29) -- cgit v1.2.3 From 0e46b6635b03d29807f810c3b415c4755a3f958d Mon Sep 17 00:00:00 2001 From: "Nikhil P. Rao" Date: Fri, 15 May 2026 21:29:05 +0000 Subject: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Nikhil P. Rao Link: https://patch.msgid.link/20260515212907.998028-1-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amd/pds_core/dev.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/amd/pds_core/dev.c b/drivers/net/ethernet/amd/pds_core/dev.c index 2e1d0d01d03a..bded6b33289c 100644 --- a/drivers/net/ethernet/amd/pds_core/dev.c +++ b/drivers/net/ethernet/amd/pds_core/dev.c @@ -162,12 +162,19 @@ static int pdsc_devcmd_wait(struct pdsc *pdsc, u8 opcode, int max_seconds) dev_dbg(dev, "DEVCMD %d %s after %ld secs\n", opcode, pdsc_devcmd_str(opcode), duration / HZ); - if ((!done || timeout) && running) { + if (!running) { + dev_err(dev, "DEVCMD %d %s fw not running\n", + opcode, pdsc_devcmd_str(opcode)); + pdsc_devcmd_clean(pdsc); + return -ENXIO; + } + + if (!done || timeout) { dev_err(dev, "DEVCMD %d %s timeout, done %d timeout %d max_seconds=%d\n", opcode, pdsc_devcmd_str(opcode), done, timeout, max_seconds); - err = -ETIMEDOUT; pdsc_devcmd_clean(pdsc); + return -ETIMEDOUT; } status = pdsc_devcmd_status(pdsc); -- cgit v1.2.3 From dc416e32baaeb620b9809e9e25fc7b30889686e9 Mon Sep 17 00:00:00 2001 From: "Nikhil P. Rao" Date: Fri, 15 May 2026 21:29:07 +0000 Subject: pds_core: fix debugfs_lookup dentry leak and error handling debugfs_lookup() returns a dentry with an elevated reference count that must be released with dput(). The current code discards the returned dentry without calling dput(), causing a reference leak on every firmware reset recovery. Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup() returns ERR_PTR(-ENODEV), not NULL. The current check passes for error pointers and would call dput() on an invalid pointer, causing a crash. Fixes: bc90fbe0c318 ("pds_core: Rework teardown/setup flow to be more common") Signed-off-by: Nikhil P. Rao Link: https://patch.msgid.link/20260515212907.998028-3-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amd/pds_core/debugfs.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amd/pds_core/debugfs.c b/drivers/net/ethernet/amd/pds_core/debugfs.c index 04c5e3abd8d7..810a0cd9bcac 100644 --- a/drivers/net/ethernet/amd/pds_core/debugfs.c +++ b/drivers/net/ethernet/amd/pds_core/debugfs.c @@ -64,9 +64,14 @@ DEFINE_SHOW_ATTRIBUTE(identity); void pdsc_debugfs_add_ident(struct pdsc *pdsc) { + struct dentry *dentry; + /* This file will already exist in the reset flow */ - if (debugfs_lookup("identity", pdsc->dentry)) + dentry = debugfs_lookup("identity", pdsc->dentry); + if (!IS_ERR_OR_NULL(dentry)) { + dput(dentry); return; + } debugfs_create_file("identity", 0400, pdsc->dentry, pdsc, &identity_fops); -- cgit v1.2.3 From 49b18315be4eecfc36b75f4aecb4d40a87d68a20 Mon Sep 17 00:00:00 2001 From: KP Singh Date: Wed, 20 May 2026 04:40:59 +0200 Subject: bpf: Reject NULL data/sig in bpf_verify_pkcs7_signature __bpf_dynptr_data() can return NULL (FILE dynptrs, any non-contiguous backing). bpf_verify_pkcs7_signature() forwards the pointer to verify_pkcs7_signature() unchecked, causing a NULL deref in asn1_ber_decoder() reachable from a sleepable BPF LSM at lsm.s/bpf. NULL-check both pointers and reject with -EINVAL. Mirrors the guards already in kernel/bpf/crypto.c. Fixes: 865b0566d8f1 ("bpf: Add bpf_verify_pkcs7_signature() kfunc") Reported-by: Xianrui Dong Signed-off-by: KP Singh Reviewed-by: Amery Hung Acked-by: Song Liu Acked-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20260520024059.313468-1-kpsingh@kernel.org Signed-off-by: Kumar Kartikeya Dwivedi --- kernel/bpf/helpers.c | 5 +++++ tools/testing/selftests/bpf/prog_tests/kfunc_dynptr_param.c | 2 +- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/helpers.c b/kernel/bpf/helpers.c index 2bb60200c266..b5314c9fed3c 100644 --- a/kernel/bpf/helpers.c +++ b/kernel/bpf/helpers.c @@ -4241,8 +4241,13 @@ __bpf_kfunc int bpf_verify_pkcs7_signature(struct bpf_dynptr *data_p, data_len = __bpf_dynptr_size(data_ptr); data = __bpf_dynptr_data(data_ptr, data_len); + if (!data) + return -EINVAL; + sig_len = __bpf_dynptr_size(sig_ptr); sig = __bpf_dynptr_data(sig_ptr, sig_len); + if (!sig) + return -EINVAL; return verify_pkcs7_signature(data, data_len, sig, sig_len, trusted_keyring->key, diff --git a/tools/testing/selftests/bpf/prog_tests/kfunc_dynptr_param.c b/tools/testing/selftests/bpf/prog_tests/kfunc_dynptr_param.c index 8cd298b78e44..04aaf4c9cf5e 100644 --- a/tools/testing/selftests/bpf/prog_tests/kfunc_dynptr_param.c +++ b/tools/testing/selftests/bpf/prog_tests/kfunc_dynptr_param.c @@ -14,7 +14,7 @@ static struct { const char *prog_name; int expected_runtime_err; } kfunc_dynptr_tests[] = { - {"dynptr_data_null", -EBADMSG}, + {"dynptr_data_null", -EINVAL}, }; static bool kfunc_not_supported; -- cgit v1.2.3 From 649932fc3815eda2f24eb4de4b3a5e94886ee0b9 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Tue, 28 Apr 2026 12:34:31 +0800 Subject: erofs: fix managed cache race for unaligned extents After unaligned compressed extents were introduced, the following race could occur: [Thread 1] [Thread 2] (z_erofs_fill_bio_vec) ... filemap_add_folio (1) (z_erofs_bind_cache) .. .. folio_attach_private (2) filemap_add_folio (3) again Since (1) is executed but (2) hasn't been executed yet, it's possible that another thread finds the same managed folio in z_erofs_bind_cache() for a different pcluster and calls filemap_add_folio() again since folio->private is still Z_EROFS_PREALLOCATED_FOLIO. Fix this by explicitly clearing folio->private before making the folio visible in the managed cache so that another pcluster can simply wait on the locked managed folio as what we did for other shared cases [1]. This only impacts unaligned data compression (`-E48bit` with zstd, for example). [1] Commit 9e2f9d34dd12 ("erofs: handle overlapped pclusters out of crafted images properly") was originally introduced to handle crafted overlapped extents, but it addresses unaligned extents as well. Fixes: 7361d1e3763b ("erofs: support unaligned encoded data") Reported-by: Arseniy Krasnov Closes: https://lore.kernel.org/r/4a2f3801-fac1-42fe-ae75-da315822e088@salutedevices.com Tested-by: Arseniy Krasnov Signed-off-by: Gao Xiang --- fs/erofs/zdata.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/fs/erofs/zdata.c b/fs/erofs/zdata.c index 43bb5a6a9924..27ab7bd844ec 100644 --- a/fs/erofs/zdata.c +++ b/fs/erofs/zdata.c @@ -1509,8 +1509,15 @@ repeat: DBG_BUGON(z_erofs_is_shortlived_page(bvec->bv_page)); folio = page_folio(zbv.page); - /* For preallocated managed folios, add them to page cache here */ + /* + * Preallocated folios are added to the managed cache here rather than + * in z_erofs_bind_cache() in order to keep these folios locked in + * increasing (physical) address order. + * Clear folio->private before these folios become visible to others in + * the managed cache to avoid duplicate additions for unaligned extents. + */ if (folio->private == Z_EROFS_PREALLOCATED_FOLIO) { + folio->private = NULL; tocache = true; goto out_tocache; } @@ -1546,14 +1553,8 @@ repeat: } return; } - /* - * Already linked with another pcluster, which only appears in - * crafted images by fuzzers for now. But handle this anyway. - */ - tocache = false; /* use temporary short-lived pages */ } else { DBG_BUGON(1); /* referenced managed folios can't be truncated */ - tocache = true; } folio_unlock(folio); folio_put(folio); -- cgit v1.2.3 From 79b09c54c6563df9846ca3094bcfd72082c3e1d7 Mon Sep 17 00:00:00 2001 From: Jia Zhu Date: Wed, 20 May 2026 12:46:07 +0800 Subject: erofs: fix metabuf leak in inode xattr initialization commit bb88e8da0025 ("erofs: use meta buffers for xattr operations") converted xattr operations to use on-stack erofs_buf instances. erofs_init_inode_xattrs() uses such a metabuf while reading the inline xattr header and shared xattr id array. Some error paths after erofs_read_metabuf() leave through out_unlock without dropping the metabuf, so the folio reference can leak. Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a no-op if no folio has been acquired, and this keeps all paths after taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site. Fixes: bb88e8da0025 ("erofs: use meta buffers for xattr operations") Signed-off-by: Jia Zhu Reviewed-by: Gao Xiang Fixes: bb88e8da0025 ("erofs: use meta buffers for xattr operations") Signed-off-by: Gao Xiang --- fs/erofs/xattr.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/erofs/xattr.c b/fs/erofs/xattr.c index 41e311019a25..df7ea019526d 100644 --- a/fs/erofs/xattr.c +++ b/fs/erofs/xattr.c @@ -89,13 +89,11 @@ static int erofs_init_inode_xattrs(struct inode *inode) vi->xattr_isize - sizeof(struct erofs_xattr_ibody_header)) { erofs_err(sb, "invalid h_shared_count %u @ nid %llu", vi->xattr_shared_count, vi->nid); - erofs_put_metabuf(&buf); ret = -EFSCORRUPTED; goto out_unlock; } vi->xattr_shared_xattrs = kmalloc_objs(uint, vi->xattr_shared_count); if (!vi->xattr_shared_xattrs) { - erofs_put_metabuf(&buf); ret = -ENOMEM; goto out_unlock; } @@ -112,12 +110,12 @@ static int erofs_init_inode_xattrs(struct inode *inode) } vi->xattr_shared_xattrs[i] = le32_to_cpu(*xattr_id); } - erofs_put_metabuf(&buf); /* paired with smp_mb() at the beginning of the function. */ smp_mb(); set_bit(EROFS_I_EA_INITED_BIT, &vi->flags); out_unlock: + erofs_put_metabuf(&buf); clear_and_wake_up_bit(EROFS_I_BL_XATTR_BIT, &vi->flags); return ret; } -- cgit v1.2.3 From 9ce754ed8e7ab4e3999767ce1505f85c449ccb07 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Tue, 19 May 2026 09:25:19 -0400 Subject: KVM: arm64: vgic-its: Reject restored DTE with out-of-range num_eventid_bits Userspace can restore an ITS Device Table Entry whose Size field encodes more EventID bits than the virtual ITS supports. The live MAPD path rejects that state, but vgic_its_restore_dte() accepts it and stores the out-of-range value in dev->num_eventid_bits. Reject restored DTEs with num_eventid_bits > VITS_TYPER_IDBITS before allocating the device. This mirrors the MAPD check and prevents the restored state from reaching vgic_its_restore_itt(), where the unchecked value can be converted into an oversized scan_its_table() range. Fixes: 57a9a117154c ("KVM: arm64: vgic-its: Device table save/restore") Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://lore.kernel.org/r/20260519132519.2142458-1-michael.bommarito@gmail.com Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org --- arch/arm64/kvm/vgic/vgic-its.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c index 2ea9f1c7ebcd..1d7e5d560af4 100644 --- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -2307,6 +2307,10 @@ static int vgic_its_restore_dte(struct vgic_its *its, u32 id, /* dte entry is valid */ offset = (entry & KVM_ITS_DTE_NEXT_MASK) >> KVM_ITS_DTE_NEXT_SHIFT; + /* Mimic the MAPD behaviour and reject invalid EID bits. */ + if (num_eventid_bits > VITS_TYPER_IDBITS) + return -EINVAL; + if (!vgic_its_check_id(its, baser, id, NULL)) return -EINVAL; -- cgit v1.2.3 From f19c354dbd457759dfcf1195ab4bdba2bb568323 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Tue, 19 May 2026 09:50:42 -0400 Subject: KVM: arm64: vgic: Free private_irqs when init fails after allocation Companion to commit 250f25367b58 ("KVM: arm64: Tear down vGIC on failed vCPU creation"), which added the missing kvm_vgic_vcpu_destroy() call to the kvm_share_hyp() failure path in kvm_arch_vcpu_create(). The kvm_vgic_vcpu_init() failure path immediately above it has the same shape and still needs the same cleanup. Call kvm_vgic_vcpu_destroy() when kvm_vgic_vcpu_init() fails so private IRQs allocated before a redistributor iodev registration failure are released before the failed vCPU is freed. Fixes: 03b3d00a70b5 ("KVM: arm64: vgic: Allocate private interrupts on demand") Cc: stable@vger.kernel.org Cc: Will Deacon Reviewed-by: Yuan Yao Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://lore.kernel.org/r/20260519135042.2219239-1-michael.bommarito@gmail.com Signed-off-by: Marc Zyngier --- arch/arm64/kvm/arm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 34c9950884d5..9453321ef8c6 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -555,8 +555,10 @@ int kvm_arch_vcpu_create(struct kvm_vcpu *vcpu) kvm_destroy_mpidr_data(vcpu->kvm); err = kvm_vgic_vcpu_init(vcpu); - if (err) + if (err) { + kvm_vgic_vcpu_destroy(vcpu); return err; + } err = kvm_share_hyp(vcpu, vcpu + 1); if (err) -- cgit v1.2.3 From 1702da76e017ae0fbe1a92b07bc332972c293e89 Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Thu, 14 May 2026 17:26:24 +0100 Subject: KVM: arm64: Fix nVHE/pKVM hyp tracing error on invalid desc pKVM must validate the host-provided tracing buffer descriptor. However, if an error is found, the hypervisor would just return 0 to the host. Fix the return value on validation failure. While at it, rename the function to hyp_trace_desc_is_valid() and skip validation for the nVHE mode as we trust host-provided data in that case. Signed-off-by: Vincent Donnefort Fixes: 680a04c333fa ("KVM: arm64: Add tracing capability for the nVHE/pKVM hyp") Link: https://lore.kernel.org/r/20260514162624.3477857-1-vdonnefort@google.com Signed-off-by: Marc Zyngier --- arch/arm64/kvm/hyp/nvhe/trace.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kvm/hyp/nvhe/trace.c b/arch/arm64/kvm/hyp/nvhe/trace.c index a6ca27b18e15..e7e150ab265f 100644 --- a/arch/arm64/kvm/hyp/nvhe/trace.c +++ b/arch/arm64/kvm/hyp/nvhe/trace.c @@ -164,13 +164,16 @@ static int hyp_trace_buffer_load(struct hyp_trace_buffer *trace_buffer, return ret; } -static bool hyp_trace_desc_validate(struct hyp_trace_desc *desc, size_t desc_size) +static bool hyp_trace_desc_is_valid(struct hyp_trace_desc *desc, size_t desc_size) { struct ring_buffer_desc *rb_desc; unsigned int cpu; size_t nr_bpages; void *desc_end; + if (!is_protected_kvm_enabled()) + return true; + /* * Both desc_size and bpages_backing_size are untrusted host-provided * values. We rely on __pkvm_host_donate_hyp() to enforce their validity. @@ -212,8 +215,10 @@ int __tracing_load(unsigned long desc_hva, size_t desc_size) if (ret) return ret; - if (!hyp_trace_desc_validate(desc, desc_size)) + if (!hyp_trace_desc_is_valid(desc, desc_size)) { + ret = -EINVAL; goto err_release_desc; + } hyp_spin_lock(&trace_buffer.lock); -- cgit v1.2.3 From 540f4a4f6ef806a28e794001bb4beac4840a6090 Mon Sep 17 00:00:00 2001 From: Alexandra Winter Date: Wed, 22 Apr 2026 16:17:16 +0200 Subject: s390/topology: Use zero-based numbering for containing entities Start the numbering scheme for higher-level topology structures (like socket, book, drawer) at zero, matching the convention for other hardware identifiers like e.g. CPU numbers. Hardware documentation, the Hardware Management Console and other tools like zmemtopo also use zero-based numbering for these containing entities. Aligning the numbering in sysfs, procfs, and tools like lscpu improves user experience by making it easier to correlate topology information across different interfaces. If available, Linux on s390 derives this physical topology information from the stsi function code 15 store_topology instruction, which is defined to start at 1 for the lowest numbered container id. Subtract one, so drawer_id, book_id and socket_id in cpu_topology[] start with 0 for the lowest numbered entity; and /proc/cpuinfo and tools like 'lscpu -ye' display the expected values. Display only, no functional change intended. Example: In a partition with 3 cores in a system with 8 cores per socket; 2 sockets per book; 4 books per dawer; and 4 drawers: Before this fix: $ lscpu -ye CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2 ONLINE CONFIGURED POLARIZATION ADDRESS 0 0 2 4 1 0 0:0:0 yes yes vert-high 0 1 0 2 4 1 0 1:1:1 yes yes vert-high 1 2 0 2 4 1 1 2:2:2 yes yes vert-medium 2 3 0 2 4 1 1 3:3:3 yes yes vert-medium 3 4 0 2 4 2 3 4:4:4 yes yes vert-low 4 5 0 2 4 2 3 5:5:5 yes yes vert-low 5 After this fix: $ lscpu -ye CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2 ONLINE CONFIGURED POLARIZATION ADDRESS 0 0 1 3 0 0 0:0:0 yes yes vert-high 0 1 0 1 3 0 0 1:1:1 yes yes vert-high 1 2 0 1 3 0 1 2:2:2 yes yes vert-medium 2 3 0 1 3 0 1 3:3:3 yes yes vert-medium 3 4 0 1 3 1 3 4:4:4 yes yes vert-low 4 5 0 1 3 1 3 5:5:5 yes yes vert-low 5 For KVM guests, qemu emulates the stsi FC15 store_topology instruction. This emulation currently erroneously starts id numbering at 0. A qemu fix is proposed that makes this emulation compliant to the stsi architecture. In case a guest with this patch is running on a qemu without the other fix, it can happen that ids of 255 are displayed erroneously. z/VM currently does not provide or emulate physical topology information to its guests. So this patch does not change anything for z/VM guests. Fixes: 10d385895055 ("[S390] topology: expose core identifier") Signed-off-by: Alexandra Winter Acked-by: Heiko Carstens Acked-by: Christian Borntraeger Acked-by: Hendrik Brueckner Signed-off-by: Alexander Gordeev --- arch/s390/kernel/topology.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 1913a5566ac2..1377c6f3f670 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -192,17 +192,21 @@ static void tl_to_masks(struct sysinfo_15_1_x *info) end = (union topology_entry *)((unsigned long)info + info->length); while (tle < end) { switch (tle->nl) { + /* + * Adjust drawer_id, book_id, and socked_id so they match the + * numbering scheme of e.g. the hardware management console. + */ case 3: drawer = drawer->next; - drawer->id = tle->container.id; + drawer->id = tle->container.id - 1; break; case 2: book = book->next; - book->id = tle->container.id; + book->id = tle->container.id - 1; break; case 1: socket = socket->next; - socket->id = tle->container.id; + socket->id = tle->container.id - 1; break; case 0: add_cpus_to_mask(&tle->cpu, drawer, book, socket); -- cgit v1.2.3 From f718506edd2d9c6a308ded9d13c632bf7b7d5a2c Mon Sep 17 00:00:00 2001 From: Alexandru Hossu Date: Fri, 15 May 2026 12:29:08 +0200 Subject: wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15. sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14), making index 15 out-of-bounds. A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response action frame with a PER_STA_PROFILE subelement where link_id = 15. The unsolicited-notification path (dialog_token = 0) is reachable any time EPCS is already enabled, without any prior client request. sdata->link[15] reads into the first word of sdata->activate_links_work (a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD), so the NULL check on the result does not catch the invalid access. The garbage pointer is then passed to ieee80211_sta_wmm_params(), which dereferences link->sdata and crashes the kernel. The same class of bug was fixed for ieee80211_ml_reconfiguration() by commit 162d331d833d ("wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration"). Fixes: de86c5f60839 ("wifi: mac80211: Add support for EPCS configuration") Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260515102908.1653088-1-hossu.alexandru@gmail.com Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 0a0f27836d57..ca1d29daf019 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -11232,6 +11232,9 @@ static void ieee80211_ml_epcs(struct ieee80211_sub_if_data *sdata, control = get_unaligned_le16(pos); link_id = control & IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID; + if (link_id >= IEEE80211_MLD_MAX_NUM_LINKS) + continue; + link = sdata_dereference(sdata->link[link_id], sdata); if (!link) continue; -- cgit v1.2.3 From e1e83feb8eae82cc9cc676db4c70f52fedc4735d Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 13 May 2026 17:06:27 +0300 Subject: wifi: mac80211: don't override max_amsdu_subframes In client mode, the extended capabilities are handled by the kernel looking at the association frame. When the supplicant installs the keys it calls sta_apply_parameters and it doesn't include the extended capabilities since those can't change after association. As a result, we overrode the max_amsdu_subframes that we set after association. Check that the ext_capa coming from the user space is valid before looking at it. If the ext_capa is NULL, it really means that the extended capabilities are not changed (as opposed to cleared). The default value for max_amsdu_subframes is 0, which means there is no limit. This value is valid and in case the association response frame does not have extended capabilities, this is the value we should use. Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221079 Signed-off-by: Emmanuel Grumbach Reviewed-by: Johannes Berg Signed-off-by: Miri Korenblit Link: https://patch.msgid.link/20260513170623.828dbb58c782.Ifd2bfc190c26140e919127adb02ffddd7b551499@changeid Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 7b77d57c9f96..f9ee9947a94d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2344,8 +2344,9 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->sta.max_sp = params->max_sp; } - ieee80211_sta_set_max_amsdu_subframes(sta, params->ext_capab, - params->ext_capab_len); + if (params->ext_capab) + ieee80211_sta_set_max_amsdu_subframes(sta, params->ext_capab, + params->ext_capab_len); /* * cfg80211 validates this (1-2007) and allows setting the AID -- cgit v1.2.3 From a74e893f30db64cdce0fc7a96d3baa417bcd55f5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 May 2026 09:10:31 +0200 Subject: wifi: mac80211: fix MLE defragmentation If either reconf or EPCS multi-link element (MLE) is contained in a non-transmitted profile, the defragmentation routine is called with a pointer to the defragmented copy, but the original elements. This is incorrect for two reasons: - if the original defragmentation was needed, it will not find the correct data - if the original frame is at a higher address, the parsing will potentially overrun the heap data (though given the layout of the buffers, only into the new defragmentation buffer, and then it has to stop and fail once that's filled with copied data. Fix it by tracking the container along with the pointer and in doing so also unify the two almost identical defragmentation routines. Fixes: 4d70e9c5488d ("wifi: mac80211: defragment reconfiguration MLE when parsing") Reviewed-by: Miriam Rachel Korenblit Reviewed-by: Ilan Peer Link: https://patch.msgid.link/20260508091031.8a6c34613178.I4de16ebbce2d27f2f8f98fc49949c7a376c2fe8d@changeid Signed-off-by: Johannes Berg --- net/mac80211/parse.c | 71 +++++++++++++++++++++++----------------------------- 1 file changed, 31 insertions(+), 40 deletions(-) diff --git a/net/mac80211/parse.c b/net/mac80211/parse.c index 2b3632c6008a..666cdd5fd0ea 100644 --- a/net/mac80211/parse.c +++ b/net/mac80211/parse.c @@ -34,6 +34,13 @@ #include "led.h" #include "wep.h" +struct ieee80211_elem_defrag { + const struct element *elem; + /* container start/len */ + const u8 *start; + size_t len; +}; + struct ieee80211_elems_parse { /* must be first for kfree to work */ struct ieee802_11_elems elems; @@ -41,11 +48,7 @@ struct ieee80211_elems_parse { /* The basic Multi-Link element in the original elements */ const struct element *ml_basic_elem; - /* The reconfiguration Multi-Link element in the original elements */ - const struct element *ml_reconf_elem; - - /* The EPCS Multi-Link element in the original elements */ - const struct element *ml_epcs_elem; + struct ieee80211_elem_defrag ml_reconf, ml_epcs; bool multi_link_inner; bool skip_vendor; @@ -162,10 +165,14 @@ ieee80211_parse_extension_element(u32 *crc, } break; case IEEE80211_ML_CONTROL_TYPE_RECONF: - elems_parse->ml_reconf_elem = elem; + elems_parse->ml_reconf.elem = elem; + elems_parse->ml_reconf.start = params->start; + elems_parse->ml_reconf.len = params->len; break; case IEEE80211_ML_CONTROL_TYPE_PRIO_ACCESS: - elems_parse->ml_epcs_elem = elem; + elems_parse->ml_epcs.elem = elem; + elems_parse->ml_epcs.start = params->start; + elems_parse->ml_epcs.len = params->len; break; default: break; @@ -990,46 +997,27 @@ ieee80211_prep_mle_link_parse(struct ieee80211_elems_parse *elems_parse, sub->start, sub->len); } -static void -ieee80211_mle_defrag_reconf(struct ieee80211_elems_parse *elems_parse) -{ - struct ieee802_11_elems *elems = &elems_parse->elems; - ssize_t ml_len; - - ml_len = cfg80211_defragment_element(elems_parse->ml_reconf_elem, - elems->ie_start, - elems->total_len, - elems_parse->scratch_pos, - elems_parse->scratch + - elems_parse->scratch_len - - elems_parse->scratch_pos, - WLAN_EID_FRAGMENT); - if (ml_len < 0) - return; - elems->ml_reconf = (void *)elems_parse->scratch_pos; - elems->ml_reconf_len = ml_len; - elems_parse->scratch_pos += ml_len; -} - -static void -ieee80211_mle_defrag_epcs(struct ieee80211_elems_parse *elems_parse) +static const void * +ieee80211_mle_defrag(struct ieee80211_elems_parse *elems_parse, + struct ieee80211_elem_defrag *defrag, + size_t *out_len) { - struct ieee802_11_elems *elems = &elems_parse->elems; + const void *ret; ssize_t ml_len; - ml_len = cfg80211_defragment_element(elems_parse->ml_epcs_elem, - elems->ie_start, - elems->total_len, + ml_len = cfg80211_defragment_element(defrag->elem, + defrag->start, defrag->len, elems_parse->scratch_pos, elems_parse->scratch + elems_parse->scratch_len - elems_parse->scratch_pos, WLAN_EID_FRAGMENT); if (ml_len < 0) - return; - elems->ml_epcs = (void *)elems_parse->scratch_pos; - elems->ml_epcs_len = ml_len; + return NULL; + ret = elems_parse->scratch_pos; + *out_len = ml_len; elems_parse->scratch_pos += ml_len; + return ret; } struct ieee802_11_elems * @@ -1109,9 +1097,12 @@ ieee802_11_parse_elems_full(struct ieee80211_elems_parse_params *params) _ieee802_11_parse_elems_full(&sub, elems_parse, NULL); } - ieee80211_mle_defrag_reconf(elems_parse); - - ieee80211_mle_defrag_epcs(elems_parse); + elems->ml_reconf = ieee80211_mle_defrag(elems_parse, + &elems_parse->ml_reconf, + &elems->ml_reconf_len); + elems->ml_epcs = ieee80211_mle_defrag(elems_parse, + &elems_parse->ml_epcs, + &elems->ml_epcs_len); if (elems->tim && !elems->parse_error) { const struct ieee80211_tim_ie *tim_ie = elems->tim; -- cgit v1.2.3 From fe2d61a5d2849ee75dd4deeb2fe35f78d80721f8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 May 2026 09:10:32 +0200 Subject: wifi: mac80211: fix multi-link element inheritance When parsing a beacon, mac80211 erroneously inherits any reconfiguration or EPCS multi-link elements from the outer elements into the multi-BSSID profile that's requested, if connected to a non-transmitted BSS, unless that profile has a non-inheritance element. This also happens if parsing a multi-BSSID profile that doesn't have a non-inheritance element. Fix this by having an empty non-inheritance element so cfg80211_is_element_inherited() is invoked in these cases and causes the parser to skip the elements that should never be inherited. Fixes: cf36cdef10e2 ("wifi: mac80211: Add support for parsing Reconfiguration Multi Link element") Fixes: 24711d60f849 ("wifi: mac80211: Support parsing EPCS ML element") Reviewed-by: Ilan Peer Reviewed-by: Benjamin Berg Link: https://patch.msgid.link/20260508091032.92184c0a3f08.I3c43b0b63d2cef8a4ddddaef1c2faaeb1de711ad@changeid Signed-off-by: Johannes Berg --- net/mac80211/parse.c | 36 +++++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/net/mac80211/parse.c b/net/mac80211/parse.c index 666cdd5fd0ea..77894d997113 100644 --- a/net/mac80211/parse.c +++ b/net/mac80211/parse.c @@ -34,6 +34,15 @@ #include "led.h" #include "wep.h" +static const u8 empty_non_inheritance[] = { + WLAN_EID_EXTENSION, 1, WLAN_EID_EXT_NON_INHERITANCE, + /* + * cfg80211_is_element_inherited() hardcodes elements that + * cannot be inherited, so we just need an empty one to be + * calling it at all. + */ +}; + struct ieee80211_elem_defrag { const struct element *elem; /* container start/len */ @@ -923,7 +932,7 @@ ieee80211_prep_mle_link_parse(struct ieee80211_elems_parse *elems_parse, { struct ieee802_11_elems *elems = &elems_parse->elems; struct ieee80211_mle_per_sta_profile *prof; - const struct element *tmp; + const struct element *tmp, *ret; ssize_t ml_len; const u8 *end; @@ -993,8 +1002,17 @@ ieee80211_prep_mle_link_parse(struct ieee80211_elems_parse *elems_parse, sub->from_ap = params->from_ap; sub->link_id = -1; - return cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE, - sub->start, sub->len); + ret = cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE, + sub->start, sub->len); + if (ret) + return ret; + + /* + * Since we know we want and found a profile, apply an empty + * non-inheritance if the profile didn't have one, so that any + * element that shouldn't be inherited by spec isn't. + */ + return (const void *)empty_non_inheritance; } static const void * @@ -1030,6 +1048,7 @@ ieee802_11_parse_elems_full(struct ieee80211_elems_parse_params *params) size_t scratch_len = 3 * params->len; bool multi_link_inner = false; + BUILD_BUG_ON(sizeof(empty_non_inheritance) != empty_non_inheritance[1] + 2); BUILD_BUG_ON(offsetof(typeof(*elems_parse), elems) != 0); /* cannot parse for both a specific link and non-transmitted BSS */ @@ -1077,6 +1096,17 @@ ieee802_11_parse_elems_full(struct ieee80211_elems_parse_params *params) non_inherit = cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE, sub.start, nontx_len); + /* + * If it's a non-transmitted BSS, we shouldn't pick + * any elements in the outer parsing that shouldn't + * be inherited. If the profile has a non-inheritance + * element this automatically happens, but if not then + * provide an empty one so that the hard-coded elements + * in cfg80211_is_element_inherited() are ignored, but + * it must be called. + */ + if (params->bss->transmitted_bss && !non_inherit) + non_inherit = (const void *)empty_non_inheritance; } else { /* must always parse to get elems_parse->ml_basic_elem */ non_inherit = ieee80211_prep_mle_link_parse(elems_parse, params, -- cgit v1.2.3 From d71c841be5d9e586ee7f36c0dc8ed4db0d9a1349 Mon Sep 17 00:00:00 2001 From: Zhao Li Date: Sat, 9 May 2026 12:34:28 +0800 Subject: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory. Fixes: 3468e1e0c639 ("wifi: mac80211: add mesh fast-rx support") Cc: stable@vger.kernel.org Signed-off-by: Zhao Li Link: https://patch.msgid.link/20260509043427.60322-2-enderaoelyther@gmail.com Signed-off-by: Johannes Berg --- net/mac80211/rx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index d18e962126ce..3fb40449c6c5 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -4984,6 +4984,7 @@ static bool ieee80211_invoke_fast_rx(struct ieee80211_rx_data *rx, u8 sa[ETH_ALEN]; } addrs __aligned(2); struct ieee80211_sta_rx_stats *stats; + u32 encoded_rate; /* for parallel-rx, we need to have DUP_VALIDATED, otherwise we write * to a common data structure; drivers can implement that per queue @@ -5091,11 +5092,14 @@ static bool ieee80211_invoke_fast_rx(struct ieee80211_rx_data *rx, /* push the addresses in front */ memcpy(skb_push(skb, sizeof(addrs)), &addrs, sizeof(addrs)); + /* capture before mesh forward may memset or free skb->cb */ + encoded_rate = sta_stats_encode_rate(status); + res = ieee80211_rx_mesh_data(rx->sdata, rx->sta, rx->skb); switch (res) { case RX_QUEUED: stats->last_rx = jiffies; - stats->last_rate = sta_stats_encode_rate(status); + stats->last_rate = encoded_rate; return true; case RX_CONTINUE: break; -- cgit v1.2.3 From dd7b6a8671939708cc4b7a46786d8c11297e8f69 Mon Sep 17 00:00:00 2001 From: Shitalkumar Gandhi Date: Mon, 11 May 2026 09:57:32 +0530 Subject: wifi: wilc1000: fix dma_buffer leak on bus acquire failure wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at the top of the function and uses a 'fail:' label to free it via kfree(dma_buffer) on error. All later error paths correctly use 'goto fail' to route through this cleanup. However, the early failure path after the first acquire_bus() call uses a bare 'return ret;', which leaks dma_buffer whenever the bus acquire fails. Replace the early return with goto fail so the existing cleanup path runs. Found via a custom Coccinelle semantic patch hunting for kmalloc'd locals leaked on early-return error paths in driver firmware-download code. Fixes: 1241c5650ff7 ("wifi: wilc1000: Fill in missing error handling") Signed-off-by: Shitalkumar Gandhi Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260511042732.998311-1-shitalkumar.gandhi@cambiumnetworks.com Signed-off-by: Johannes Berg --- drivers/net/wireless/microchip/wilc1000/wlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c index 3fa8592eb250..4b116fe6f9ea 100644 --- a/drivers/net/wireless/microchip/wilc1000/wlan.c +++ b/drivers/net/wireless/microchip/wilc1000/wlan.c @@ -1265,7 +1265,7 @@ int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer, ret = acquire_bus(wilc, WILC_BUS_ACQUIRE_AND_WAKEUP); if (ret) - return ret; + goto fail; wilc->hif_func->hif_read_reg(wilc, WILC_GLB_RESET_0, ®); reg &= ~BIT(10); -- cgit v1.2.3 From a6e6ccd5bd07155c2add6c74ce1a5e68ad3b95ea Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Fri, 15 May 2026 11:17:18 -0400 Subject: wifi: mac80211: consume only present negotiated TTLM maps ieee80211_tid_to_link_map_size_ok() validates negotiated TTLM elements against the number of link-map entries indicated by link_map_presence. ieee80211_parse_neg_ttlm() must consume the same layout. The parser advanced its cursor for every TID, including TIDs whose presence bit is clear and therefore have no map bytes in the element. A sparse map can then make a later present TID read past the validated element. The bad bytes land in neg_ttlm->{up,down}link[tid] but are gated by valid_links before being applied to driver state, so a peer cannot turn the read into a policy change. Under KUnit + KASAN with an exact-sized element allocation the OOB read is reported as a slab-out-of-bounds; whether the same trigger fires under the production RX path depends on surrounding allocator state. Advance the cursor only when the current TID has a map present. Fixes: 8f500fbc6c65 ("wifi: mac80211: process and save negotiated TID to Link mapping request") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260515151719.1317659-2-michael.bommarito@gmail.com Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ca1d29daf019..b98ddfa3003e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -8164,6 +8164,7 @@ ieee80211_parse_neg_ttlm(struct ieee80211_sub_if_data *sdata, "No active links for TID %d", tid); return -EINVAL; } + pos += map_size; } else { map = 0; } @@ -8182,7 +8183,6 @@ ieee80211_parse_neg_ttlm(struct ieee80211_sub_if_data *sdata, default: return -EINVAL; } - pos += map_size; } return 0; } -- cgit v1.2.3 From dc14686f27df6454b13b16ad1c9203ab3e9b0375 Mon Sep 17 00:00:00 2001 From: Kartik Nair Date: Mon, 11 May 2026 01:54:37 +0530 Subject: wifi: cfg80211: wext: validate chandef in monitor mode cfg80211_wext_siwfreq() constructs a channel definition for monitor mode but passes it to cfg80211_set_monitor_channel() without first validating it with cfg80211_chandef_valid(). This causes a WARN_ON in cfg80211_chandef_dfs_required() when it receives an invalid chandef. Add the missing cfg80211_chandef_valid() check before calling cfg80211_set_monitor_channel() to return -EINVAL early on invalid channel definitions, consistent with how other callers handle this. Reported-by: syzbot+02a1a03b8622d3c7d1c9@syzkaller.appspotmail.com Signed-off-by: Kartik Nair Link: https://patch.msgid.link/20260510202437.7857-1-contact.kartikn@gmail.com [clarify subject] Signed-off-by: Johannes Berg --- net/wireless/wext-compat.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c index 22d9d9bae8f5..63d145b524c9 100644 --- a/net/wireless/wext-compat.c +++ b/net/wireless/wext-compat.c @@ -789,6 +789,8 @@ static int cfg80211_wext_siwfreq(struct net_device *dev, chandef.chan = ieee80211_get_channel(&rdev->wiphy, freq); if (!chandef.chan) return -EINVAL; + if (!cfg80211_chandef_valid(&chandef)) + return -EINVAL; return cfg80211_set_monitor_channel(rdev, dev, &chandef); case NL80211_IFTYPE_MESH_POINT: freq = cfg80211_wext_freq(wextfreq); -- cgit v1.2.3 From dc334b9bf9d28070f7a3e413fead759abdce19ba Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:03:21 +0200 Subject: platform/x86: acer-wireless: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 acer-wireless driver. Fixes: f7e648027d7e ("platform/x86: acer-wireless: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/4746824.LvFx2qVVIh@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/acer-wireless.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/acer-wireless.c b/drivers/platform/x86/acer-wireless.c index f464b13a58af..fae8e5ad0f97 100644 --- a/drivers/platform/x86/acer-wireless.c +++ b/drivers/platform/x86/acer-wireless.c @@ -37,9 +37,14 @@ static void acer_wireless_notify(acpi_handle handle, u32 event, void *data) static int acer_wireless_probe(struct platform_device *pdev) { + struct acpi_device *adev; struct input_dev *idev; int ret; + adev = ACPI_COMPANION(&pdev->dev); + if (!adev) + return -ENODEV; + idev = devm_input_allocate_device(&pdev->dev); if (!idev) return -ENOMEM; @@ -57,8 +62,7 @@ static int acer_wireless_probe(struct platform_device *pdev) if (ret) return ret; - return acpi_dev_install_notify_handler(ACPI_COMPANION(&pdev->dev), - ACPI_DEVICE_NOTIFY, + return acpi_dev_install_notify_handler(adev, ACPI_DEVICE_NOTIFY, acer_wireless_notify, &pdev->dev); } -- cgit v1.2.3 From 08f29dc34d1cf39696d04bc1ff31538dc2d74c72 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:04:23 +0200 Subject: platform/x86: asus-laptop: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 asus-laptop driver. Fixes: ba19eb10170b ("platform/x86: asus-laptop: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/5083741.GXAFRqVoOG@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/asus-laptop.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index dbbb6292cd11..140ac8a10537 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -1826,10 +1826,14 @@ static bool asus_device_present; static int asus_acpi_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); + struct acpi_device *device; struct asus_laptop *asus; int result; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + pr_notice("Asus Laptop Support version %s\n", ASUS_LAPTOP_VERSION); asus = kzalloc_obj(struct asus_laptop); -- cgit v1.2.3 From 8a17c62b02fc4baa02300b57a2ad882c7a06a984 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:05:07 +0200 Subject: platform/x86: dell/dell-rbtn: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 dell-rbtn driver. Fixes: 19ebacfb442b ("platform/x86: dell/dell-rbtn: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/2276487.irdbgypaU6@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/dell/dell-rbtn.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/dell/dell-rbtn.c b/drivers/platform/x86/dell/dell-rbtn.c index 34af9f4ff741..180b8c6720e6 100644 --- a/drivers/platform/x86/dell/dell-rbtn.c +++ b/drivers/platform/x86/dell/dell-rbtn.c @@ -396,11 +396,15 @@ static void rbtn_cleanup(struct device *dev) static int rbtn_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); struct rbtn_data *rbtn_data; + struct acpi_device *device; enum rbtn_type type; int ret = 0; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + type = rbtn_check(device); if (type == RBTN_UNKNOWN) { dev_info(&pdev->dev, "Unknown device type\n"); -- cgit v1.2.3 From 814830394764cef79c506629edd55f072e0207d1 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:05:47 +0200 Subject: platform/x86: eeepc-laptop: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 eeepc-laptop driver. Fixes: 079b59fd2d79 ("platform/x86: eeepc-laptop: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/3056852.e9J7NaK4W3@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/eeepc-laptop.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 02a71095920e..d18a80907611 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -1363,10 +1363,14 @@ static bool eeepc_device_present; static int eeepc_acpi_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); + struct acpi_device *device; struct eeepc_laptop *eeepc; int result; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + pr_notice(EEEPC_LAPTOP_NAME "\n"); eeepc = kzalloc_obj(struct eeepc_laptop); if (!eeepc) -- cgit v1.2.3 From e99829a15989d58ffe1ee3e283e0a5eb8e41ee8b Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:08:58 +0200 Subject: platform/x86: fujitsu: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add requisite ACPI_COMPANION() checks against NULL to the platform/x86 fujitsu-laptop driver. Fixes: 6da22b031a3c ("platform/x86: fujitsu: Convert laptop driver to a platform one") Fixes: d5c9212ccfaa ("platform/x86: fujitsu: Convert backlight driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Acked-by: Jonathan Woithe Link: https://patch.msgid.link/3430329.44csPzL39Z@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/fujitsu-laptop.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 2e265be2267e..54d0b9cec4d3 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -530,10 +530,14 @@ static void acpi_fujitsu_bl_notify(acpi_handle handle, u32 event, void *data) static int acpi_fujitsu_bl_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); + struct acpi_device *device; struct fujitsu_bl *priv; int ret; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) return -ENODEV; @@ -993,10 +997,14 @@ static void acpi_fujitsu_laptop_notify(acpi_handle handle, u32 event, void *data static int acpi_fujitsu_laptop_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); struct fujitsu_laptop *priv; + struct acpi_device *device; int ret, i = 0; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; -- cgit v1.2.3 From ab743c6d7b118235f6d48a513a6560afbc5e615a Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:09:58 +0200 Subject: platform/x86: fujitsu-tablet: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add requisite ACPI_COMPANION() checks against NULL to the platform/x86 fujitsu-tablet driver. Fixes: bd13b265d386 ("platform/x86: fujitsu-tablet: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/10861611.nUPlyArG6x@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/fujitsu-tablet.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/fujitsu-tablet.c b/drivers/platform/x86/fujitsu-tablet.c index 8319df28e9b8..2f8c1b89cbca 100644 --- a/drivers/platform/x86/fujitsu-tablet.c +++ b/drivers/platform/x86/fujitsu-tablet.c @@ -445,10 +445,14 @@ static acpi_status fujitsu_walk_resources(struct acpi_resource *res, void *data) static int acpi_fujitsu_probe(struct platform_device *pdev) { - struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + struct acpi_device *adev; acpi_status status; int error; + adev = ACPI_COMPANION(&pdev->dev); + if (!adev) + return -ENODEV; + status = acpi_walk_resources(adev->handle, METHOD_NAME__CRS, fujitsu_walk_resources, NULL); if (ACPI_FAILURE(status) || !fujitsu.irq || !fujitsu.io_base) -- cgit v1.2.3 From 51e91ad0a0ccb0906306c653f9e8b97a180d8608 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:11:00 +0200 Subject: platform/x86: intel/rst: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 intel/rst driver. Fixes: 163a68a31f74 ("platform/x86: intel/rst: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/2051525.PYKUYFuaPT@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/rst.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel/rst.c b/drivers/platform/x86/intel/rst.c index 4bd10927aad9..bb19f0d89305 100644 --- a/drivers/platform/x86/intel/rst.c +++ b/drivers/platform/x86/intel/rst.c @@ -102,9 +102,13 @@ static struct device_attribute irst_timeout_attr = { static int irst_probe(struct platform_device *pdev) { - struct acpi_device *acpi = ACPI_COMPANION(&pdev->dev); + struct acpi_device *acpi; int error; + acpi = ACPI_COMPANION(&pdev->dev); + if (!acpi) + return -ENODEV; + error = device_create_file(&acpi->dev, &irst_timeout_attr); if (unlikely(error)) return error; -- cgit v1.2.3 From 922952f2bbcfe21375973d0ea0e662a1a4837b10 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:11:43 +0200 Subject: platform/x86: intel/smartconnect: Check ACPI_HANDLE() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_HANDLE() check against NULL to the platform/x86 intel/smartconnect driver. Fixes: 8a44bd3ffdb2 ("platform/x86: intel/smartconnect: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/7956676.EvYhyI6sBW@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/smartconnect.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel/smartconnect.c b/drivers/platform/x86/intel/smartconnect.c index 4d866b6366d6..71e91ac60e5d 100644 --- a/drivers/platform/x86/intel/smartconnect.c +++ b/drivers/platform/x86/intel/smartconnect.c @@ -12,10 +12,14 @@ MODULE_LICENSE("GPL"); static int smartconnect_acpi_probe(struct platform_device *pdev) { - acpi_handle handle = ACPI_HANDLE(&pdev->dev); unsigned long long value; + acpi_handle handle; acpi_status status; + handle = ACPI_HANDLE(&pdev->dev); + if (!handle) + return -ENODEV; + status = acpi_evaluate_integer(handle, "GAOS", NULL, &value); if (ACPI_FAILURE(status)) return -EINVAL; -- cgit v1.2.3 From 7e169326c2263ebc4878baae536c956fa3118eff Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:12:27 +0200 Subject: platform/x86: lg-laptop: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 lg-laptop driver. Fixes: 2d9cb20610f7 ("platform/x86: lg-laptop: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/3706551.iIbC2pHGDl@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/lg-laptop.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/lg-laptop.c b/drivers/platform/x86/lg-laptop.c index 9681412d694b..a8f2f465ef3f 100644 --- a/drivers/platform/x86/lg-laptop.c +++ b/drivers/platform/x86/lg-laptop.c @@ -761,12 +761,11 @@ static void lg_laptop_remove_address_space_handler(void *data) static int acpi_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); struct platform_device_info pdev_info = { - .fwnode = acpi_fwnode_handle(device), .name = PLATFORM_NAME, .id = PLATFORM_DEVID_NONE, }; + struct acpi_device *device; acpi_status status; int ret; const char *product; @@ -775,6 +774,12 @@ static int acpi_probe(struct platform_device *pdev) if (pf_device) return 0; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + + pdev_info.fwnode = acpi_fwnode_handle(device), + status = acpi_install_address_space_handler(device->handle, LG_ADDRESS_SPACE_ID, &lg_laptop_address_space_handler, NULL, &pdev->dev); -- cgit v1.2.3 From f15b0a3043f193677903be52d7dbef3d5c8df282 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:13:13 +0200 Subject: platform/x86: panasonic-laptop: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 panasonic-laptop driver. Fixes: de6837243af0 ("platform/x86: panasonic-laptop: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/3353471.5fSG56mABF@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/panasonic-laptop.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index 1337f7c49805..b83113c26f88 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -981,11 +981,15 @@ static int acpi_pcc_hotkey_resume(struct device *dev) static int acpi_pcc_hotkey_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); struct backlight_properties props; + struct acpi_device *device; struct pcc_acpi *pcc; int num_sifr, result; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + num_sifr = acpi_pcc_get_sqty(device); /* -- cgit v1.2.3 From f2ec69363fb52fbb2010e5edbec2b8ca0951aadf Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:13:59 +0200 Subject: platform/x86: sony-laptop: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add requisite ACPI_COMPANION() checks against NULL to the platform/x86 sony-laptop driver. Fixes: 138db7ee58c0 ("platform/x86: sony-laptop: Convert PIC driver to a platform one") Fixes: 14004dd31caa ("platform/x86: sony-laptop: Convert NC driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/1871155.VLH7GnMWUR@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/sony-laptop.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index b18f00e9082f..67370967df6f 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -3147,11 +3147,15 @@ static void sony_nc_backlight_cleanup(void) static int sony_nc_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); + struct acpi_device *device; acpi_status status; int result = 0; struct sony_nc_value *item; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + sony_nc_acpi_device = device; strscpy(acpi_device_class(device), "sony/hotkey"); @@ -4509,11 +4513,15 @@ static void sony_pic_remove(struct platform_device *pdev) static int sony_pic_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); struct sony_pic_ioport *io, *tmp_io; struct sony_pic_irq *irq, *tmp_irq; + struct acpi_device *device; int result; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + spic_dev.acpi_dev = device; strscpy(acpi_device_class(device), "sony/hotkey"); sony_pic_detect_device_type(&spic_dev); -- cgit v1.2.3 From 840bcd6bd5bcbc807b679e367ae7a148a1f07370 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:14:43 +0200 Subject: platform/x86: system76: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 system76 driver. Fixes: 80b8f68b94ab ("platform/x86: system76: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/2072699.usQuhbGJ8B@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/system76_acpi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/system76_acpi.c b/drivers/platform/x86/system76_acpi.c index 693cbb461382..dd7b1b07c316 100644 --- a/drivers/platform/x86/system76_acpi.c +++ b/drivers/platform/x86/system76_acpi.c @@ -674,10 +674,14 @@ static void system76_notify(acpi_handle handle, u32 event, void *context) // Probe a System76 platform device static int system76_probe(struct platform_device *pdev) { - struct acpi_device *acpi_dev = ACPI_COMPANION(&pdev->dev); + struct acpi_device *acpi_dev; struct system76_data *data; int err; + acpi_dev = ACPI_COMPANION(&pdev->dev); + if (!acpi_dev) + return -ENODEV; + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; -- cgit v1.2.3 From 0978824a64f160f1d2e8dc821a522ad91e7b4215 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:15:31 +0200 Subject: platform/x86: toshiba_acpi: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 toshiba_acpi driver. Fixes: 246d6cefe525 ("platform/x86: toshiba_acpi: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/1973170.CQOukoFCf9@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/toshiba_acpi.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 35d899c01740..7cecb3a70b9c 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -3374,7 +3374,7 @@ static const struct dmi_system_id toshiba_dmi_quirks[] __initconst = { static int toshiba_acpi_probe(struct platform_device *pdev) { - struct acpi_device *acpi_dev = ACPI_COMPANION(&pdev->dev); + struct acpi_device *acpi_dev; struct toshiba_acpi_dev *dev; const char *hci_method; u32 dummy; @@ -3383,6 +3383,10 @@ static int toshiba_acpi_probe(struct platform_device *pdev) if (toshiba_acpi) return -EBUSY; + acpi_dev = ACPI_COMPANION(&pdev->dev); + if (!acpi_dev) + return -ENODEV; + pr_info("Toshiba Laptop ACPI Extras version %s\n", TOSHIBA_ACPI_VERSION); -- cgit v1.2.3 From 48b06fffb16901237dc0acbb0474a54b3cc5730f Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:16:18 +0200 Subject: platform/x86: toshiba_bluetooth: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 toshiba_bluetooth driver. Fixes: 553b2ac59fbb ("platform/x86: toshiba_bluetooth: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/2715450.Lt9SDvczpP@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/toshiba_bluetooth.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c index e50d4fc1e603..e00abba58c7c 100644 --- a/drivers/platform/x86/toshiba_bluetooth.c +++ b/drivers/platform/x86/toshiba_bluetooth.c @@ -230,10 +230,14 @@ static int toshiba_bt_resume(struct device *dev) static int toshiba_bt_rfkill_probe(struct platform_device *pdev) { - struct acpi_device *device = ACPI_COMPANION(&pdev->dev); struct toshiba_bluetooth_dev *bt_dev; + struct acpi_device *device; int result; + device = ACPI_COMPANION(&pdev->dev); + if (!device) + return -ENODEV; + result = toshiba_bluetooth_present(device->handle); if (result) return result; -- cgit v1.2.3 From 4840f8bb3e9aad183e707950f24f829fd220eb07 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:17:00 +0200 Subject: platform/x86: toshiba_haps: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 toshiba_haps driver. Fixes: 3a96c7915d93 ("platform/x86: toshiba_haps: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/2285136.Mh6RI2rZIc@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/toshiba_haps.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/toshiba_haps.c b/drivers/platform/x86/toshiba_haps.c index 1486252b5983..8d12241924df 100644 --- a/drivers/platform/x86/toshiba_haps.c +++ b/drivers/platform/x86/toshiba_haps.c @@ -182,13 +182,17 @@ static int toshiba_haps_available(acpi_handle handle) static int toshiba_haps_probe(struct platform_device *pdev) { - struct acpi_device *acpi_dev = ACPI_COMPANION(&pdev->dev); struct toshiba_haps_dev *haps; + struct acpi_device *acpi_dev; int ret; if (toshiba_haps) return -EBUSY; + acpi_dev = ACPI_COMPANION(&pdev->dev); + if (!acpi_dev) + return -ENODEV; + if (!toshiba_haps_available(acpi_dev->handle)) return -ENODEV; -- cgit v1.2.3 From 53a8f95cbb407608ef77a864ad4a59f25ddd906c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 12 May 2026 16:17:44 +0200 Subject: platform/x86: wireless-hotkey: Check ACPI_COMPANION() against NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the platform/x86 wireless-hotkey driver. Fixes: 8507277ef132 ("platform/x86: wireless-hotkey: Convert ACPI driver to a platform one") Signed-off-by: Rafael J. Wysocki Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/3899916.MHq7AAxBmi@rafael.j.wysocki Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/wireless-hotkey.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/wireless-hotkey.c b/drivers/platform/x86/wireless-hotkey.c index f680d8ff8e87..3151844d1699 100644 --- a/drivers/platform/x86/wireless-hotkey.c +++ b/drivers/platform/x86/wireless-hotkey.c @@ -89,9 +89,14 @@ static void wl_notify(acpi_handle handle, u32 event, void *data) static int wl_probe(struct platform_device *pdev) { + struct acpi_device *adev; struct wl_button *button; int err; + adev = ACPI_COMPANION(&pdev->dev); + if (!adev) + return -ENODEV; + button = kzalloc_obj(struct wl_button); if (!button) return -ENOMEM; @@ -104,8 +109,8 @@ static int wl_probe(struct platform_device *pdev) kfree(button); return err; } - err = acpi_dev_install_notify_handler(ACPI_COMPANION(&pdev->dev), - ACPI_DEVICE_NOTIFY, wl_notify, button); + err = acpi_dev_install_notify_handler(adev, ACPI_DEVICE_NOTIFY, + wl_notify, button); if (err) { pr_err("Failed to install ACPI notify handler\n"); wireless_input_destroy(&pdev->dev); -- cgit v1.2.3 From 9af1b6e175c82daf4b423da339a722d8e67a735a Mon Sep 17 00:00:00 2001 From: Deepanshu Kartikey Date: Tue, 19 May 2026 13:52:47 +0530 Subject: drm/virtio: use uninterruptible resv lock for plane updates virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and ignore its return value. The function can fail with -EINTR from dma_resv_lock_interruptible() (signal during lock wait) or with -ENOMEM from dma_resv_reserve_fences() (fence slot allocation), leaving the resv lock not held. The queue path then walks the object array and calls dma_resv_add_fence(), which requires the lock held; with lockdep enabled this trips dma_resv_assert_held(): WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840 Call Trace: virtio_gpu_array_add_fence virtio_gpu_queue_ctrl_sgs virtio_gpu_queue_fenced_ctrl_buffer virtio_gpu_cursor_plane_update drm_atomic_helper_commit_planes drm_atomic_helper_commit_tail commit_tail drm_atomic_helper_commit drm_atomic_commit drm_atomic_helper_update_plane __setplane_atomic drm_mode_cursor_universal drm_mode_cursor_common drm_mode_cursor_ioctl drm_ioctl __x64_sys_ioctl Beyond the WARN, mutating the dma_resv fence list without the lock races with concurrent readers/writers and can corrupt the list. Both call sites run inside the .atomic_update plane callback, which DRM atomic helpers do not allow to fail (by the time it runs, the commit has been signed off to userspace and there is no clean rollback path). Moving the lock acquisition to .prepare_fb was rejected because the broader lock scope deadlocks against other BO locking paths in the same atomic commit. Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses dma_resv_lock() instead of dma_resv_lock_interruptible(). This eliminates the -EINTR failure mode -- the realistic syzbot trigger -- without extending the lock hold across the commit. The helper locks a single BO and rejects nents > 1 with -EINVAL; both fix sites lock exactly one BO. Use it from virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush(); check the return value to handle the remaining -ENOMEM case from dma_resv_reserve_fences() by freeing the objs and skipping the plane update for that frame. The framebuffer BOs touched here are not shared with other contexts and lock contention is expected to be brief, so the loss of signal-interruptibility is acceptable. Other callers of virtio_gpu_array_lock_resv() (the ioctl paths) continue to use the interruptible variant. The bug was reported by syzbot, triggered via fault injection (fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the -ENOMEM branch in dma_resv_reserve_fences(). Reported-by: syzbot+72bd3dd3a5d5f39a0271@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=72bd3dd3a5d5f39a0271 Fixes: 5cfd31c5b3a3 ("drm/virtio: fix virtio_gpu_cursor_plane_update().") Cc: stable@vger.kernel.org Signed-off-by: Deepanshu Kartikey Signed-off-by: Dmitry Osipenko Link: https://patch.msgid.link/20260519082247.34470-1-kartikey406@gmail.com --- drivers/gpu/drm/virtio/virtgpu_drv.h | 1 + drivers/gpu/drm/virtio/virtgpu_gem.c | 17 +++++++++++++++++ drivers/gpu/drm/virtio/virtgpu_plane.c | 10 ++++++++-- 3 files changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/virtio/virtgpu_drv.h b/drivers/gpu/drm/virtio/virtgpu_drv.h index f17660a71a3e..2f3531950aa4 100644 --- a/drivers/gpu/drm/virtio/virtgpu_drv.h +++ b/drivers/gpu/drm/virtio/virtgpu_drv.h @@ -317,6 +317,7 @@ virtio_gpu_array_from_handles(struct drm_file *drm_file, u32 *handles, u32 nents void virtio_gpu_array_add_obj(struct virtio_gpu_object_array *objs, struct drm_gem_object *obj); int virtio_gpu_array_lock_resv(struct virtio_gpu_object_array *objs); +int virtio_gpu_lock_one_resv_uninterruptible(struct virtio_gpu_object_array *objs); void virtio_gpu_array_unlock_resv(struct virtio_gpu_object_array *objs); void virtio_gpu_array_add_fence(struct virtio_gpu_object_array *objs, struct dma_fence *fence); diff --git a/drivers/gpu/drm/virtio/virtgpu_gem.c b/drivers/gpu/drm/virtio/virtgpu_gem.c index f22dc5c21cd4..435d37d36034 100644 --- a/drivers/gpu/drm/virtio/virtgpu_gem.c +++ b/drivers/gpu/drm/virtio/virtgpu_gem.c @@ -238,6 +238,23 @@ int virtio_gpu_array_lock_resv(struct virtio_gpu_object_array *objs) return ret; } +int virtio_gpu_lock_one_resv_uninterruptible(struct virtio_gpu_object_array *objs) +{ + int ret; + + if (objs->nents != 1) + return -EINVAL; + + dma_resv_lock(objs->objs[0]->resv, NULL); + + ret = dma_resv_reserve_fences(objs->objs[0]->resv, 1); + if (ret) { + virtio_gpu_array_unlock_resv(objs); + return ret; + } + return 0; +} + void virtio_gpu_array_unlock_resv(struct virtio_gpu_object_array *objs) { if (objs->nents == 1) { diff --git a/drivers/gpu/drm/virtio/virtgpu_plane.c b/drivers/gpu/drm/virtio/virtgpu_plane.c index a126d1b25f46..652352424744 100644 --- a/drivers/gpu/drm/virtio/virtgpu_plane.c +++ b/drivers/gpu/drm/virtio/virtgpu_plane.c @@ -215,7 +215,10 @@ static void virtio_gpu_resource_flush(struct drm_plane *plane, if (!objs) return; virtio_gpu_array_add_obj(objs, vgfb->base.obj[0]); - virtio_gpu_array_lock_resv(objs); + if (virtio_gpu_lock_one_resv_uninterruptible(objs)) { + virtio_gpu_array_put_free(objs); + return; + } virtio_gpu_cmd_resource_flush(vgdev, bo->hw_res_handle, x, y, width, height, objs, vgplane_st->fence); @@ -459,7 +462,10 @@ static void virtio_gpu_cursor_plane_update(struct drm_plane *plane, if (!objs) return; virtio_gpu_array_add_obj(objs, vgfb->base.obj[0]); - virtio_gpu_array_lock_resv(objs); + if (virtio_gpu_lock_one_resv_uninterruptible(objs)) { + virtio_gpu_array_put_free(objs); + return; + } virtio_gpu_cmd_transfer_to_host_2d (vgdev, 0, plane->state->crtc_w, -- cgit v1.2.3 From 237557b8a81ab948e8332f7c0058e758f081c0a3 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 20 May 2026 15:05:04 +0200 Subject: sysfs: don't remove existing directory on update failure When sysfs_update_group() is called for a named group and create_files() fails (e.g. -ENOMEM), internal_create_group() calls kernfs_remove(kn) on the group directory. In the update path, kn was obtained via kernfs_find_and_get() and refers to a directory that already existed before this call. Removing it silently destroys a sysfs group that the caller did not create. Only remove the directory if we created it ourselves. On update failure the directory remains as it is left empty by remove_files() inside create_files(), but can be repopulated by a retry. Cc: Rajat Jain Fixes: c855cf2759d2 ("sysfs: Fix internal_create_group() for named group updates") Cc: stable Assisted-by: gkh_clanker_t1000 Reviewed-by: Rafael J. Wysocki (Intel) Reviewed-by: Danilo Krummrich Link: https://patch.msgid.link/2026052003-uniquely-hastily-c093@gregkh Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/group.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/sysfs/group.c b/fs/sysfs/group.c index 182e54e575ee..4e1e4f18a166 100644 --- a/fs/sysfs/group.c +++ b/fs/sysfs/group.c @@ -188,7 +188,7 @@ static int internal_create_group(struct kobject *kobj, int update, kernfs_get(kn); error = create_files(kn, kobj, uid, gid, grp, update); if (error) { - if (grp->name) + if (grp->name && !update) kernfs_remove(kn); } kernfs_put(kn); -- cgit v1.2.3 From 3d879647fb03dab6fe6e1dd9404a2dd324096218 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 20 May 2026 10:02:58 -0600 Subject: io_uring/timeout: splice timed out link in timeout handler A previous commit deferred this to the task_work part of it, so it could be protected by ->uring_lock. But that's actually not necessary here, and in fact the head clearing is not enough to make that safe. For those two reasons, just re-instate the local splicing. Fixes: 49ae66eb8c27 ("io_uring: defer linked-timeout chain splice out of hrtimer context") Signed-off-by: Jens Axboe --- io_uring/timeout.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/io_uring/timeout.c b/io_uring/timeout.c index 6353a4d979dc..c4dd26cf342d 100644 --- a/io_uring/timeout.c +++ b/io_uring/timeout.c @@ -417,8 +417,10 @@ static enum hrtimer_restart io_link_timeout_fn(struct hrtimer *timer) * done in io_req_task_link_timeout(), if needed. */ if (prev) { - if (!req_ref_inc_not_zero(prev)) + if (!req_ref_inc_not_zero(prev)) { + io_remove_next_linked(prev); prev = NULL; + } } list_del(&timeout->list); timeout->prev = prev; -- cgit v1.2.3 From 22572dbcd3486e6c4dced877125bbf50e4e24edf Mon Sep 17 00:00:00 2001 From: Cunlong Li Date: Wed, 20 May 2026 11:30:54 +0800 Subject: cgroup: rstat: relax NMI guard after switch to try_cmpxchg Commit 36df6e3dbd7e ("cgroup: make css_rstat_updated nmi safe") used this_cpu_cmpxchg() for the lockless insertion, and therefore required both ARCH_HAVE_NMI_SAFE_CMPXCHG and ARCH_HAS_NMI_SAFE_THIS_CPU_OPS in the NMI guard: on archs without the latter, this_cpu_cmpxchg() falls back to "local_irq_save() + plain cmpxchg", and local_irq_save() cannot mask NMIs. Commit 3309b63a2281 ("cgroup: rstat: use LOCK CMPXCHG in css_rstat_updated") later replaced this_cpu_cmpxchg() with plain try_cmpxchg() to fix cross-CPU lockless-list corruption, but left the NMI guard untouched. After that switch, css_rstat_updated() no longer performs any this_cpu_*() RMW operations and only relies on the arch having NMI-safe cmpxchg, so ARCH_HAS_NMI_SAFE_THIS_CPU_OPS is no longer required in the guard. Relax the guard accordingly so that archs which have HAVE_NMI and ARCH_HAVE_NMI_SAFE_CMPXCHG but not ARCH_HAS_NMI_SAFE_THIS_CPU_OPS (e.g. sparc, powerpc on PPC64/BOOK3S) can benefit from the existing CONFIG_MEMCG_NMI_SAFETY_REQUIRES_ATOMIC path. Without this, the css is never queued in NMI on those archs, and the atomics staged by account_{slab,kmem}_nmi_safe() are not drained by flush_nmi_stats(). Fixes: 3309b63a2281 ("cgroup: rstat: use LOCK CMPXCHG in css_rstat_updated") Signed-off-by: Cunlong Li Signed-off-by: Tejun Heo --- kernel/cgroup/rstat.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/kernel/cgroup/rstat.c b/kernel/cgroup/rstat.c index ed60ba119c68..de816a43db9f 100644 --- a/kernel/cgroup/rstat.c +++ b/kernel/cgroup/rstat.c @@ -81,11 +81,10 @@ void __css_rstat_updated(struct cgroup_subsys_state *css, int cpu) lockdep_assert_preemption_disabled(); /* - * For archs withnot nmi safe cmpxchg or percpu ops support, ignore - * the requests from nmi context. + * The lockless insertion below relies on NMI-safe cmpxchg; + * bail out in NMI on archs that don't provide it. */ - if ((!IS_ENABLED(CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG) || - !IS_ENABLED(CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS)) && in_nmi()) + if (!IS_ENABLED(CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG) && in_nmi()) return; rstatc = css_rstat_cpu(css, cpu); -- cgit v1.2.3 From 9fc75b71fdd38465c76c6f6a884cdd4ae3c72d90 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 19 May 2026 23:07:26 +0200 Subject: rbd: eliminate a race in lock_dwork draining on unmap Given how rbd_lock_add_request() and rbd_img_exclusive_lock() are written, lock_dwork may be (re)queued more than it's actually needed: for example in case a new I/O request comes in while we are in the middle of rbd_acquire_lock() on behalf of another I/O request. This is expected and with rbd_release_lock() preemptively canceling lock_dwork is benign under normal operation. A more problematic example is maybe_kick_acquire(): if (have_requests || delayed_work_pending(&rbd_dev->lock_dwork)) { dout("%s rbd_dev %p kicking lock_dwork\n", __func__, rbd_dev); mod_delayed_work(rbd_dev->task_wq, &rbd_dev->lock_dwork, 0); } It's not unrealistic for lock_dwork to get canceled right after delayed_work_pending() returns true and for mod_delayed_work() to requeue it right there anyway. This is a classic TOCTOU race. When it comes to unmapping the image, there is an implicit assumption of no self-initiated exclusive lock activity past the point of return from rbd_dev_image_unlock() which unlocks the lock if it happens to be held. This unlock is assumed to be final and lock_dwork (as well as all other exclusive lock tasks, really) isn't expected to get queued again. However, lock_dwork is canceled only in cancel_tasks_sync() (i.e. later in the unmap sequence) and on top of that the cancellation can get in effect nullified by maybe_kick_acquire(). This may result in rbd_acquire_lock() executing after rbd_dev_device_release() and rbd_dev_image_release() run and free and/or reset a bunch of things. One of the possible failure modes then is a violated rbd_assert(rbd_image_format_valid(rbd_dev->image_format)); in rbd_dev_header_info() which is called via rbd_dev_refresh() from rbd_post_acquire_action(). Redo exclusive lock task draining to provide saner semantics and try to meet the assumptions around rbd_dev_image_unlock(). Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov Reviewed-by: Viacheslav Dubeyko --- drivers/block/rbd.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 4065336ebd1f..6c1e7347e6a7 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -4565,24 +4565,12 @@ out: return ret; } -static void cancel_tasks_sync(struct rbd_device *rbd_dev) -{ - dout("%s rbd_dev %p\n", __func__, rbd_dev); - - cancel_work_sync(&rbd_dev->acquired_lock_work); - cancel_work_sync(&rbd_dev->released_lock_work); - cancel_delayed_work_sync(&rbd_dev->lock_dwork); - cancel_work_sync(&rbd_dev->unlock_work); -} - /* * header_rwsem must not be held to avoid a deadlock with * rbd_dev_refresh() when flushing notifies. */ static void rbd_unregister_watch(struct rbd_device *rbd_dev) { - cancel_tasks_sync(rbd_dev); - mutex_lock(&rbd_dev->watch_mutex); if (rbd_dev->watch_state == RBD_WATCH_STATE_REGISTERED) __rbd_unregister_watch(rbd_dev); @@ -6548,10 +6536,18 @@ out_err: static void rbd_dev_image_unlock(struct rbd_device *rbd_dev) { + dout("%s rbd_dev %p\n", __func__, rbd_dev); + + disable_delayed_work_sync(&rbd_dev->lock_dwork); + disable_work_sync(&rbd_dev->unlock_work); + down_write(&rbd_dev->lock_rwsem); if (__rbd_is_lock_owner(rbd_dev)) __rbd_release_lock(rbd_dev); up_write(&rbd_dev->lock_rwsem); + + flush_work(&rbd_dev->acquired_lock_work); + flush_work(&rbd_dev->released_lock_work); } /* -- cgit v1.2.3 From 576ec047d20b368b43c4d5db98c4f2e0f3c101ec Mon Sep 17 00:00:00 2001 From: David Carlier Date: Fri, 8 May 2026 20:57:47 +0100 Subject: tracing: Avoid NULL return from hist_field_name() on truncation hist_field_name() returns "" everywhere except the fully-qualified VAR_REF/EXPR case, where snprintf() truncation returns NULL early and bypasses the bottom NULL->"" guard. Callers don't expect NULL: strcat(expr, hist_field_name(field, 0)) at trace_events_hist.c:1758 and the strcmp() in the sort-key match loop at :4804 both deref it. system and event_name are bounded by MAX_EVENT_NAME_LEN, but the field name on a VAR_REF is kstrdup'd from a histogram variable name parsed out of the trigger string and has no length cap, so a long enough var name in a fully qualified reference can reach the truncation path. Keep the length check but leave field_name as "" on overflow. Link: https://patch.msgid.link/20260508195747.25492-1-devnexen@gmail.com Fixes: 5ec1d1e97de1 ("tracing: Rebuild full_name on each hist_field_name() call") Signed-off-by: David Carlier Signed-off-by: Steven Rostedt --- kernel/trace/trace_events_hist.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c index 0dbbf6cca9bc..eb2c2bc8bc3d 100644 --- a/kernel/trace/trace_events_hist.c +++ b/kernel/trace/trace_events_hist.c @@ -1369,10 +1369,8 @@ static const char *hist_field_name(struct hist_field *field, len = snprintf(full_name, sizeof(full_name), fmt, field->system, field->event_name, field->name); - if (len >= sizeof(full_name)) - return NULL; - - field_name = full_name; + if (len < sizeof(full_name)) + field_name = full_name; } else field_name = field->name; } else if (field->flags & HIST_FIELD_FL_TIMESTAMP) -- cgit v1.2.3 From 59e932ded949fa6f0340bf7c6d7818f962fa4fd2 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Tue, 12 May 2026 22:15:39 +0200 Subject: Bluetooth: bnep: Fix UAF read of dev->name bnep_add_connection() needs to keep holding the bnep_session_sem while reading dev->name (just like bnep_get_connlist() does); otherwise the bnep_session() thread can concurrently free the net_device, which can for example be triggered by a concurrent bnep_del_connection(). (This UAF is fairly uninteresting from a security perspective; calling bnep_add_connection() requires passing a capable(CAP_NET_ADMIN) check. It also requires completely tearing down a netdev during a fairly tight race window.) Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/bnep/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c index 853c8d7644b5..0de5df690bd0 100644 --- a/net/bluetooth/bnep/core.c +++ b/net/bluetooth/bnep/core.c @@ -645,8 +645,8 @@ int bnep_add_connection(struct bnep_connadd_req *req, struct socket *sock) goto failed; } - up_write(&bnep_session_sem); strcpy(req->device, dev->name); + up_write(&bnep_session_sem); return 0; failed: -- cgit v1.2.3 From 23d528d817a485fe9800a66c9411bd9e3d8a6f63 Mon Sep 17 00:00:00 2001 From: Luiz Augusto von Dentz Date: Thu, 14 May 2026 09:42:24 -0400 Subject: Bluetooth: hci_sync: Fix not setting mask for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE This fixes not setting the bit for HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE when extended features bit is set otherwise the controller may not generate HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE causing hci_le_read_all_remote_features_sync to timeout waiting for it. Also remove dead code. Fixes: a106e50be74b ("Bluetooth: HCI: Add support for LL Extended Feature Set") Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/hci_sync.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index fd3aacdea512..aff8562a8690 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -4438,6 +4438,9 @@ static int hci_le_set_event_mask_sync(struct hci_dev *hdev) events[4] |= 0x02; /* LE BIG Info Advertising Report */ } + if (ll_ext_feature_capable(hdev)) + events[5] |= BIT(2); + if (le_cs_capable(hdev)) { /* Channel Sounding events */ events[5] |= 0x08; /* LE CS Read Remote Supported Cap Complete event */ @@ -7413,9 +7416,6 @@ static int hci_le_read_all_remote_features_sync(struct hci_dev *hdev, sizeof(cp), &cp, HCI_EVT_LE_ALL_REMOTE_FEATURES_COMPLETE, HCI_CMD_TIMEOUT, NULL); - - return __hci_cmd_sync_status(hdev, HCI_OP_LE_READ_ALL_REMOTE_FEATURES, - sizeof(cp), &cp, HCI_CMD_TIMEOUT); } static int hci_le_read_remote_features_sync(struct hci_dev *hdev, void *data) -- cgit v1.2.3 From 88365d04fdc821dc4e9eb0cc00fdf6905430d172 Mon Sep 17 00:00:00 2001 From: Kiran K Date: Fri, 15 May 2026 00:32:48 +0530 Subject: Bluetooth: btintel_pcie: Fix incorrect MAC access programming btintel_pcie_get_mac_access() and btintel_pcie_release_mac_access() were programming STOP_MAC_ACCESS_DIS and XTAL_CLK_REQ in addition to the MAC_ACCESS_REQ handshake. These bits are not part of the host MAC-access handshake on the supported parts; the driver was programming them incorrectly. Drop the writes so the register update contains only the bits the controller actually consumes. Fixes: b9465e6670a2 ("Bluetooth: btintel_pcie: Read hardware exception data") Signed-off-by: Kiran K Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btintel_pcie.c | 20 ++++++-------------- drivers/bluetooth/btintel_pcie.h | 3 --- 2 files changed, 6 insertions(+), 17 deletions(-) diff --git a/drivers/bluetooth/btintel_pcie.c b/drivers/bluetooth/btintel_pcie.c index a3643e67b33f..37e050763633 100644 --- a/drivers/bluetooth/btintel_pcie.c +++ b/drivers/bluetooth/btintel_pcie.c @@ -582,12 +582,10 @@ static int btintel_pcie_get_mac_access(struct btintel_pcie_data *data) reg = btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG); - reg |= BTINTEL_PCIE_CSR_FUNC_CTRL_STOP_MAC_ACCESS_DIS; - reg |= BTINTEL_PCIE_CSR_FUNC_CTRL_XTAL_CLK_REQ; - if ((reg & BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_STS) == 0) + if (!(reg & BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_REQ)) { reg |= BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_REQ; - - btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG, reg); + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG, reg); + } do { reg = btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG); @@ -607,16 +605,10 @@ static void btintel_pcie_release_mac_access(struct btintel_pcie_data *data) reg = btintel_pcie_rd_reg32(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG); - if (reg & BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_REQ) + if (reg & BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_REQ) { reg &= ~BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_REQ; - - if (reg & BTINTEL_PCIE_CSR_FUNC_CTRL_STOP_MAC_ACCESS_DIS) - reg &= ~BTINTEL_PCIE_CSR_FUNC_CTRL_STOP_MAC_ACCESS_DIS; - - if (reg & BTINTEL_PCIE_CSR_FUNC_CTRL_XTAL_CLK_REQ) - reg &= ~BTINTEL_PCIE_CSR_FUNC_CTRL_XTAL_CLK_REQ; - - btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG, reg); + btintel_pcie_wr_reg32(data, BTINTEL_PCIE_CSR_FUNC_CTRL_REG, reg); + } } static void *btintel_pcie_copy_tlv(void *dest, enum btintel_pcie_tlv_type type, diff --git a/drivers/bluetooth/btintel_pcie.h b/drivers/bluetooth/btintel_pcie.h index f922abd1e7d8..13efef499e4e 100644 --- a/drivers/bluetooth/btintel_pcie.h +++ b/drivers/bluetooth/btintel_pcie.h @@ -34,9 +34,6 @@ #define BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_STS (BIT(20)) #define BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_ACCESS_REQ (BIT(21)) -/* Stop MAC Access disconnection request */ -#define BTINTEL_PCIE_CSR_FUNC_CTRL_STOP_MAC_ACCESS_DIS (BIT(22)) -#define BTINTEL_PCIE_CSR_FUNC_CTRL_XTAL_CLK_REQ (BIT(23)) #define BTINTEL_PCIE_CSR_FUNC_CTRL_BUS_MASTER_STS (BIT(28)) #define BTINTEL_PCIE_CSR_FUNC_CTRL_BUS_MASTER_DISCON (BIT(29)) -- cgit v1.2.3 From 84c24fb151fc1179355296d7ff29129ac7c42129 Mon Sep 17 00:00:00 2001 From: David Carlier Date: Fri, 15 May 2026 07:25:25 +0100 Subject: Bluetooth: ISO: drop ISO_END frames received without prior ISO_START ISO data PDUs carry a packet-boundary flag indicating START, CONT, END or SINGLE. The ISO_CONT branch of iso_recv() guards against a missing ISO_START by checking conn->rx_len before touching conn->rx_skb, but ISO_END does not. If a peer sends an ISO_END as the first packet on a fresh ISO connection, conn->rx_skb is still NULL and conn->rx_len is zero, so skb_put(conn->rx_skb, ...) dereferences NULL and oopses. For BIS, where receivers sync to a broadcaster without pairing, any broadcaster on the air can trigger this. Mirror the ISO_CONT check at the top of ISO_END so a stray end fragment is logged and dropped instead of crashing the host. Fixes: ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: David Carlier Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/iso.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index 7cb2864fe872..b971281f0a2b 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -2593,6 +2593,11 @@ int iso_recv(struct hci_dev *hdev, u16 handle, struct sk_buff *skb, u16 flags) break; case ISO_END: + if (!conn->rx_len) { + BT_ERR("Unexpected end frame (len %d)", skb->len); + goto drop; + } + skb_copy_from_linear_data(skb, skb_put(conn->rx_skb, skb->len), skb->len); conn->rx_len -= skb->len; -- cgit v1.2.3 From dd1dda6b8d6e1f4376a5b3055a04f0ecbdb4d6bd Mon Sep 17 00:00:00 2001 From: Jiajia Liu Date: Mon, 18 May 2026 10:24:02 +0800 Subject: Bluetooth: btmtk: fix urb->setup_packet leak in error paths The setup_packet of control urb is not freed if usb_submit_urb fails or the submitted urb is killed. Add free in these two paths. Fixes: a1c49c434e150 ("Bluetooth: btusb: Add protocol support for MediaTek MT7668U USB devices") Signed-off-by: Jiajia Liu Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/btmtk.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c index a29f72216c34..8ff66b276af0 100644 --- a/drivers/bluetooth/btmtk.c +++ b/drivers/bluetooth/btmtk.c @@ -537,6 +537,7 @@ static void btmtk_usb_wmt_recv(struct urb *urb) return; } else if (urb->status == -ENOENT) { /* Avoid suspend failed when usb_kill_urb */ + kfree(urb->setup_packet); return; } @@ -610,6 +611,7 @@ static int btmtk_usb_submit_wmt_recv_urb(struct hci_dev *hdev) if (err != -EPERM && err != -ENODEV) bt_dev_err(hdev, "urb %p submission failed (%d)", urb, -err); + kfree(dr); usb_unanchor_urb(urb); } -- cgit v1.2.3 From d3f7d17960ed50df3a6709c5158caff989c8c905 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Fri, 15 May 2026 10:38:19 -0400 Subject: Bluetooth: MGMT: validate Add Extended Advertising Data length MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command, with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy cp->data, but it never checks that those bytes are part of the mgmt command payload. A short command can therefore make add_ext_adv_data() pass an out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond the command buffer are addressable, they can also be copied into the advertising instance as scan response data, where the caller can read them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte slab-out-of-bounds read. Reject commands whose length does not match the fixed header plus both advertising data lengths before parsing cp->data. Fixes: 12410572833a ("Bluetooth: Break add adv into two mgmt commands") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/mgmt.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index b05bb380e5f8..de5bd6b637b2 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -9110,9 +9110,15 @@ static int add_ext_adv_data(struct sock *sk, struct hci_dev *hdev, void *data, struct adv_info *adv_instance; int err = 0; struct mgmt_pending_cmd *cmd; + u16 expected_len; BT_DBG("%s", hdev->name); + expected_len = struct_size(cp, data, cp->adv_data_len + cp->scan_rsp_len); + if (expected_len != data_len) + return mgmt_cmd_status(sk, hdev->id, MGMT_OP_ADD_EXT_ADV_DATA, + MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); adv_instance = hci_find_adv_instance(hdev, cp->instance); -- cgit v1.2.3 From c1bb9336ae6b54a5f6a353c4bd4ed9a4307e429b Mon Sep 17 00:00:00 2001 From: Mingyu Wang <25181214217@stu.xidian.edu.cn> Date: Mon, 18 May 2026 10:49:49 +0800 Subject: Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer Dereference (NPD) conditions were observed in the lifecycle management of hci_uart. The primary issue arises because the workqueues (init_ready and write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY flag is set during TTY close. If a hangup occurs before setup completes, hci_uart_tty_close() skips the teardown of these workqueues and proceeds to free the `hu` struct. When the scheduled work executes later, it blindly dereferences the freed `hu` struct. Furthermore, several data races and UAFs were identified in the teardown sequence: 1. Calling hci_uart_flush() from hci_uart_close() without effectively disabling write_work causes a race condition where both can concurrently double-free hu->tx_skb. This happens because protocol timers can concurrently invoke hci_uart_tx_wakeup() and requeue write_work. 2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF when vendor specific protocol close callbacks dereference hu->hdev. 3. In the initialization error paths, failing to take the proto_lock write lock before clearing PROTO_READY leads to races with active readers. Additionally, hci_uart_tty_receive() accesses hu->hdev outside the read lock, leading to UAFs if the initialization error path frees hdev concurrently. Fix these synchronization and lifecycle issues by: 1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first, followed immediately by a cancel_work_sync(&hu->write_work). Clearing the flag locks out concurrent protocol timers from successfully invoking hci_uart_tx_wakeup(), effectively rendering the cancellation permanent and preventing the tx_skb double-free. 2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip hu->proto->flush(). This is perfectly safe in the tty_close path because hu->proto->close() executes shortly after, which intrinsically purges all protocol SKB queues and tears down the state. 3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev) across all close and error paths to prevent vendor-level UAFs. 4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive() inside the proto_lock read-side critical section to safely synchronize with device unregistration. 5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely flush the workqueue before hci_uart_flush() is invoked via the HCI core. 6. Utilizing cancel_work_sync() instead of disable_work_sync() across all paths to prevent permanently breaking user-space retry capabilities. Fixes: 3b799254cf6f ("Bluetooth: hci_uart: Cancel init work before unregistering") Cc: stable@vger.kernel.org Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn> Signed-off-by: Luiz Augusto von Dentz --- drivers/bluetooth/hci_ldisc.c | 48 +++++++++++++++++++++++++++++++++++-------- 1 file changed, 40 insertions(+), 8 deletions(-) diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index 275ea865bc29..47f4902b40b4 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -194,7 +194,15 @@ void hci_uart_init_work(struct work_struct *work) err = hci_register_dev(hu->hdev); if (err < 0) { BT_ERR("Can't register HCI device"); + + percpu_down_write(&hu->proto_lock); clear_bit(HCI_UART_PROTO_READY, &hu->flags); + percpu_up_write(&hu->proto_lock); + + /* Safely cancel work after clearing flags */ + cancel_work_sync(&hu->write_work); + + /* Close protocol before freeing hdev */ hu->proto->close(hu); hdev = hu->hdev; hu->hdev = NULL; @@ -263,8 +271,12 @@ static int hci_uart_open(struct hci_dev *hdev) /* Close device */ static int hci_uart_close(struct hci_dev *hdev) { + struct hci_uart *hu = hci_get_drvdata(hdev); + BT_DBG("hdev %p", hdev); + cancel_work_sync(&hu->write_work); + hci_uart_flush(hdev); hdev->flush = NULL; return 0; @@ -531,6 +543,7 @@ static void hci_uart_tty_close(struct tty_struct *tty) { struct hci_uart *hu = tty->disc_data; struct hci_dev *hdev; + bool proto_ready; BT_DBG("tty %p", tty); @@ -540,24 +553,38 @@ static void hci_uart_tty_close(struct tty_struct *tty) if (!hu) return; - hdev = hu->hdev; - if (hdev) - hci_uart_close(hdev); + /* Wait for init_ready to finish to prevent registration races */ + cancel_work_sync(&hu->init_ready); - if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) { + proto_ready = test_bit(HCI_UART_PROTO_READY, &hu->flags); + if (proto_ready) { percpu_down_write(&hu->proto_lock); clear_bit(HCI_UART_PROTO_READY, &hu->flags); percpu_up_write(&hu->proto_lock); + } - cancel_work_sync(&hu->init_ready); - cancel_work_sync(&hu->write_work); + /* + * Unconditionally cancel write_work AFTER clearing PROTO_READY. + * This ensures that concurrent protocol timers cannot requeue + * write_work via hci_uart_tx_wakeup(), permanently preventing + * double-free races and UAFs. + */ + cancel_work_sync(&hu->write_work); + + hdev = hu->hdev; + if (hdev) + hci_uart_close(hdev); /* proto->flush is safely skipped */ + if (proto_ready) { if (hdev) { if (test_bit(HCI_UART_REGISTERED, &hu->flags)) hci_unregister_dev(hdev); - hci_free_dev(hdev); } + /* Close protocol before freeing hdev (intrinsically purges queues) */ hu->proto->close(hu); + + if (hdev) + hci_free_dev(hdev); } clear_bit(HCI_UART_PROTO_SET, &hu->flags); @@ -625,11 +652,12 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data, * tty caller */ hu->proto->recv(hu, data, count); - percpu_up_read(&hu->proto_lock); if (hu->hdev) hu->hdev->stat.byte_rx += count; + percpu_up_read(&hu->proto_lock); + tty_unthrottle(tty); } @@ -695,6 +723,10 @@ static int hci_uart_register_dev(struct hci_uart *hu) percpu_down_write(&hu->proto_lock); clear_bit(HCI_UART_PROTO_INIT, &hu->flags); percpu_up_write(&hu->proto_lock); + /* Cancel work after clearing flags */ + cancel_work_sync(&hu->write_work); + + /* Close protocol before freeing hdev */ hu->proto->close(hu); hu->hdev = NULL; hci_free_dev(hdev); -- cgit v1.2.3 From ab1513597c6cf17cd1ad2a21e3b045421b48e022 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Safa=20Karaku=C5=9F?= Date: Sat, 16 May 2026 21:15:04 +0300 Subject: Bluetooth: fix UAF in l2cap_sock_cleanup_listen() vs l2cap_conn_del() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit bt_accept_dequeue() unlinks a not-yet-accepted child from the parent accept queue and release_sock()s it before returning, so the returned sk has no caller reference and is unlocked. l2cap_sock_cleanup_listen() walks these children on listening-socket close. A concurrent HCI disconnect drives hci_rx_work -> l2cap_conn_del() which runs l2cap_chan_del() + l2cap_sock_kill() and frees the child sk and its l2cap_chan; cleanup_listen() then uses both: BUG: KASAN: slab-use-after-free in l2cap_sock_kill l2cap_sock_kill / l2cap_sock_cleanup_listen / __x64_sys_close Freed by: l2cap_conn_del -> l2cap_sock_close_cb -> l2cap_sock_kill This is distinct from the two fixes already in this area: commit e83f5e24da741 ("Bluetooth: serialize accept_q access") serialises the accept_q list/poll and takes temporary refs inside bt_accept_dequeue(), and CVE-2025-39860 serialises the userspace close()/accept() race by calling cleanup_listen() under lock_sock() in l2cap_sock_release(). Neither covers l2cap_conn_del() running from hci_rx_work, so this UAF still reproduces on current bluetooth/master. Take the reference at the source: bt_accept_dequeue() does sock_hold() while sk is still locked, before release_sock(); callers sock_put(). cleanup_listen() pins the chan with l2cap_chan_hold_unless_zero() under a brief child sk lock (serialising vs l2cap_sock_teardown_cb()), drops it before l2cap_chan_lock(), and skips a duplicate l2cap_sock_kill() on SOCK_DEAD. conn->lock is not taken here: cleanup_listen() runs under the parent sk lock and that would invert conn->lock -> chan->lock -> sk_lock (lockdep). KASAN/SMP: an unprivileged listen/close vs HCI-disconnect race produced 12 use-after-free reports per run before this change; 0, and no lockdep report, over 1600+ raced iterations after it on bluetooth/master. Fixes: 15f02b910562 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode") Cc: stable@vger.kernel.org Reported-by: Siwei Zhang Reviewed-by: Siwei Zhang Signed-off-by: Safa Karakuş Signed-off-by: Luiz Augusto von Dentz --- net/bluetooth/af_bluetooth.c | 10 +++++++++ net/bluetooth/iso.c | 9 +++++++- net/bluetooth/l2cap_sock.c | 51 ++++++++++++++++++++++++++++++++++++++------ net/bluetooth/rfcomm/sock.c | 9 +++++++- net/bluetooth/sco.c | 9 +++++++- 5 files changed, 78 insertions(+), 10 deletions(-) diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 9d68dd86023c..1a6aa3f8d4d6 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -340,6 +340,16 @@ restart: if (newsock) sock_graft(sk, newsock); + /* Hand the caller a reference taken while sk is + * still locked. bt_accept_unlink() just dropped + * the accept-queue reference; without this hold a + * concurrent teardown (e.g. l2cap_conn_del() -> + * l2cap_sock_kill()) could free sk between + * release_sock() and the caller using it. Every + * caller drops this with sock_put() when done. + */ + sock_hold(sk); + release_sock(sk); if (next) sock_put(next); diff --git a/net/bluetooth/iso.c b/net/bluetooth/iso.c index b971281f0a2b..d7af617cda45 100644 --- a/net/bluetooth/iso.c +++ b/net/bluetooth/iso.c @@ -751,6 +751,8 @@ static void iso_sock_cleanup_listen(struct sock *parent) while ((sk = bt_accept_dequeue(parent, NULL))) { iso_sock_close(sk); iso_sock_kill(sk); + /* Drop the reference handed back by bt_accept_dequeue(). */ + sock_put(sk); } /* If listening socket has a hcon, properly disconnect it */ @@ -1356,8 +1358,13 @@ static int iso_sock_accept(struct socket *sock, struct socket *newsock, } ch = bt_accept_dequeue(sk, newsock); - if (ch) + if (ch) { + /* Drop the bridging ref from bt_accept_dequeue(); + * the grafted socket keeps ch alive from here. + */ + sock_put(ch); break; + } if (!timeo) { err = -EAGAIN; diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index cf590a67d364..b34e7da8d906 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -349,8 +349,13 @@ static int l2cap_sock_accept(struct socket *sock, struct socket *newsock, } nsk = bt_accept_dequeue(sk, newsock); - if (nsk) + if (nsk) { + /* Drop the bridging ref from bt_accept_dequeue(); + * the grafted socket keeps nsk alive from here. + */ + sock_put(nsk); break; + } if (!timeo) { err = -EAGAIN; @@ -1475,22 +1480,54 @@ static void l2cap_sock_cleanup_listen(struct sock *parent) BT_DBG("parent %p state %s", parent, state_to_string(parent->sk_state)); - /* Close not yet accepted channels */ + /* Close not yet accepted channels. + * + * bt_accept_dequeue() now returns sk with an extra reference held + * (taken while sk was still locked) so a concurrent l2cap_conn_del() + * -> l2cap_sock_kill() cannot free sk under us. + * + * cleanup_listen() runs under the parent sk lock, so unlike + * l2cap_sock_shutdown() we must NOT take conn->lock here: that would + * establish sk_lock -> conn->lock and invert the established + * conn->lock -> chan->lock -> sk_lock order (lockdep deadlock). + * + * Instead, briefly take the child sk lock to fetch and pin its chan. + * l2cap_conn_del() reaches the chan free only via + * l2cap_chan_del() -> l2cap_sock_teardown_cb(), which itself takes + * the child sk lock; holding it across l2cap_chan_hold_unless_zero() + * therefore guarantees the chan cannot be freed while we read and + * pin it (hold_unless_zero() additionally skips a chan already past + * its last reference). We then drop the sk lock before taking + * chan->lock, so sk and chan locks are never held together. + */ while ((sk = bt_accept_dequeue(parent, NULL))) { - struct l2cap_chan *chan = l2cap_pi(sk)->chan; + struct l2cap_chan *chan; + + lock_sock_nested(sk, L2CAP_NESTING_NORMAL); + chan = l2cap_chan_hold_unless_zero(l2cap_pi(sk)->chan); + release_sock(sk); + if (!chan) { + /* l2cap_conn_del() already tearing this child down */ + sock_put(sk); + continue; + } BT_DBG("child chan %p state %s", chan, state_to_string(chan->state)); - l2cap_chan_hold(chan); l2cap_chan_lock(chan); - __clear_chan_timer(chan); l2cap_chan_close(chan, ECONNRESET); - l2cap_sock_kill(sk); - + /* l2cap_conn_del() may already have killed this socket + * (it sets SOCK_DEAD); skip the duplicate to avoid a + * double sock_put()/l2cap_chan_put(). + */ + if (!sock_flag(sk, SOCK_DEAD)) + l2cap_sock_kill(sk); l2cap_chan_unlock(chan); + l2cap_chan_put(chan); + sock_put(sk); } } diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index be6639cd6f59..bd7d959c6e9e 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -180,6 +180,8 @@ static void rfcomm_sock_cleanup_listen(struct sock *parent) while ((sk = bt_accept_dequeue(parent, NULL))) { rfcomm_sock_close(sk); rfcomm_sock_kill(sk); + /* Drop the reference handed back by bt_accept_dequeue(). */ + sock_put(sk); } parent->sk_state = BT_CLOSED; @@ -497,8 +499,13 @@ static int rfcomm_sock_accept(struct socket *sock, struct socket *newsock, } nsk = bt_accept_dequeue(sk, newsock); - if (nsk) + if (nsk) { + /* Drop the bridging ref from bt_accept_dequeue(); + * the grafted socket keeps nsk alive from here. + */ + sock_put(nsk); break; + } if (!timeo) { err = -EAGAIN; diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index eba44525d41d..f1799c6a6f87 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -502,6 +502,8 @@ static void sco_sock_cleanup_listen(struct sock *parent) while ((sk = bt_accept_dequeue(parent, NULL))) { sco_sock_close(sk); sco_sock_kill(sk); + /* Drop the reference handed back by bt_accept_dequeue(). */ + sock_put(sk); } parent->sk_state = BT_CLOSED; @@ -765,8 +767,13 @@ static int sco_sock_accept(struct socket *sock, struct socket *newsock, } ch = bt_accept_dequeue(sk, newsock); - if (ch) + if (ch) { + /* Drop the bridging ref from bt_accept_dequeue(); + * the grafted socket keeps ch alive from here. + */ + sock_put(ch); break; + } if (!timeo) { err = -EAGAIN; -- cgit v1.2.3 From 44126343d58c68adaa8343fbf1c07dd20078c35e Mon Sep 17 00:00:00 2001 From: Tom Lendacky Date: Wed, 20 May 2026 12:00:50 -0500 Subject: x86/mm: Disable broadcast TLB flush when PCID is disabled Booting with "nopcid" clears X86_FEATURE_PCID and keeps CR4.PCIDE from being set to one. On AMD CPUs that support INVLPGB, broadcast TLB flushing remains enabled. There are two checks that decide whether the global ASID code runs, mm_global_asid() and consider_global_asid(), that key off of the X86_FEATURE_INVLPGB feature. Once an mm becomes active on more than three CPUs, consider_global_asid() assigns it a global ASID, after which flush_tlb_mm_range() takes the broadcast_tlb_flush() path using a non-zero PCID. Issuing an INVLPGB with a non-zero PCID while CR4.PCIDE is not set results in a #GP: Oops: general protection fault, kernel NULL pointer dereference 0x1: 0000 [#1] SMP NOPTI CPU: 158 UID: 0 PID: 3119 Comm: snap Not tainted 7.1.0-rc3 #1 PREEMPT(full) Hardware name: ... RIP: 0010:broadcast_tlb_flush Code: ... 89 da 48 83 c8 07 <0f> 01 fe eb 08 cc cc cc ... Call Trace: flush_tlb_mm_range ptep_clear_flush wp_page_copy ? _raw_spin_unlock __handle_mm_fault handle_mm_fault do_user_addr_fault exc_page_fault asm_exc_page_fault All processors that support broadcast TLB invalidation also have PCID support, so it is only the "nopcid" scenario that is of concern. In this situation just disable the broadcast TLB support using the CPUID dependency support by making X86_FEATURE_INVLPGB dependent on X86_FEATURE_PCID. [ bp: Massage commit message. ] Fixes: 4afeb0ed1753 ("x86/mm: Enable broadcast TLB invalidation for multi-threaded processes") Suggested-by: Dave Hansen Assisted-by: Claude:claude-opus-4.7 Signed-off-by: Tom Lendacky Signed-off-by: Borislav Petkov (AMD) Acked-by: Rik van Riel Cc: Link: https://patch.msgid.link/b915acfd63e8b2a094fdeb8dc608738072518764.1779296450.git.thomas.lendacky@amd.com --- arch/x86/kernel/cpu/cpuid-deps.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/cpu/cpuid-deps.c b/arch/x86/kernel/cpu/cpuid-deps.c index 146f6f8b0650..99801e844b30 100644 --- a/arch/x86/kernel/cpu/cpuid-deps.c +++ b/arch/x86/kernel/cpu/cpuid-deps.c @@ -92,6 +92,7 @@ static const struct cpuid_dep cpuid_deps[] = { { X86_FEATURE_FRED, X86_FEATURE_LKGS }, { X86_FEATURE_SPEC_CTRL_SSBD, X86_FEATURE_SPEC_CTRL }, { X86_FEATURE_LASS, X86_FEATURE_SMAP }, + { X86_FEATURE_INVLPGB, X86_FEATURE_PCID }, {} }; -- cgit v1.2.3 From 5f17ae0f595aeb560155ce98edbe44d3eacc7e40 Mon Sep 17 00:00:00 2001 From: Alice Mikityanska Date: Mon, 18 May 2026 09:22:49 +0300 Subject: udp: gso: Fix handling checksum in __udp_gso_segment The cited commit started using msslen for uh->len, but still uses newlen to adjust uh->check. Although the checksum is ignored in most cases due to the hardware offload, __udp_gso_segment attempts to maintain the correct one. Fix uh->check and adjust it by the right value. Additionally, after the fix, newlen becomes assigned and unused before the loop. The code can be simplified a bit if mss adjustment is dropped, so that newlen becomes equal to msslen before the loop, and msslen can be also dropped, saving a few lines of code. This brings us back to one variable, drops an unneeded arithmetic for mss, and fixes the UDP checksum. Fixes: b10b446ce7ad ("udp: gso: Use single MSS length in UDP header for GSO_PARTIAL") Signed-off-by: Alice Mikityanska Reviewed-by: Willem de Bruijn Signed-off-by: Gal Pressman Link: https://patch.msgid.link/20260518062250.3019914-2-gal@nvidia.com Signed-off-by: Jakub Kicinski --- net/ipv4/udp_offload.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c index a0813d425b71..2578aa7f9ff9 100644 --- a/net/ipv4/udp_offload.c +++ b/net/ipv4/udp_offload.c @@ -482,11 +482,11 @@ struct sk_buff *__udp_gso_segment(struct sk_buff *gso_skb, struct sock *sk = gso_skb->sk; unsigned int sum_truesize = 0; struct sk_buff *segs, *seg; - __be16 newlen, msslen; struct udphdr *uh; unsigned int mss; bool copy_dtor; __sum16 check; + __be16 newlen; int ret = 0; mss = skb_shinfo(gso_skb)->gso_size; @@ -555,15 +555,6 @@ struct sk_buff *__udp_gso_segment(struct sk_buff *gso_skb, return segs; } - msslen = htons(sizeof(*uh) + mss); - - /* GSO partial and frag_list segmentation only requires splitting - * the frame into an MSS multiple and possibly a remainder, both - * cases return a GSO skb. So update the mss now. - */ - if (skb_is_gso(segs)) - mss *= skb_shinfo(segs)->gso_segs; - seg = segs; uh = udp_hdr(seg); @@ -586,7 +577,7 @@ struct sk_buff *__udp_gso_segment(struct sk_buff *gso_skb, if (!seg->next) break; - uh->len = msslen; + uh->len = newlen; uh->check = check; if (seg->ip_summed == CHECKSUM_PARTIAL) -- cgit v1.2.3 From 78effd896eee11ac9db9bcbb53e7bbcad96073d7 Mon Sep 17 00:00:00 2001 From: Gal Pressman Date: Mon, 18 May 2026 09:22:50 +0300 Subject: udp: Fix UDP length on last GSO_PARTIAL segment Following the cited commit, __udp_gso_segment() writes single MSS length in the UDP header. The cited patch doesn't account for the fact that the last segment could be a GSO skb by itself. This could happen when the size of the packet is a multiple of MSS, hence the first segment is also the last one (there is no need for a remainder skb). When the post-loop segment is a GSO skb, assign the single MSS length in the UDP header. Fixes: b10b446ce7ad ("udp: gso: Use single MSS length in UDP header for GSO_PARTIAL") Reported-by: Matthew Schwartz Closes: https://lore.kernel.org/all/6c3fb15e-711d-4b8d-b152-e03d9b05293f@linux.dev/ Tested-by: Matthew Schwartz Reviewed-by: Dragos Tatulea Signed-off-by: Gal Pressman Link: https://patch.msgid.link/20260518062250.3019914-3-gal@nvidia.com Signed-off-by: Jakub Kicinski --- net/ipv4/udp_offload.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv4/udp_offload.c b/net/ipv4/udp_offload.c index 2578aa7f9ff9..29651b1a0bc7 100644 --- a/net/ipv4/udp_offload.c +++ b/net/ipv4/udp_offload.c @@ -590,9 +590,12 @@ struct sk_buff *__udp_gso_segment(struct sk_buff *gso_skb, uh = udp_hdr(seg); } - /* last packet can be partial gso_size, account for that in checksum */ - newlen = htons(skb_tail_pointer(seg) - skb_transport_header(seg) + - seg->data_len); + /* Unless skb fits perfectly as GSO_PARTIAL, the trailing + * segment may not be full MSS, account for that in the checksum + */ + if (!skb_is_gso(seg)) + newlen = htons(skb_tail_pointer(seg) - + skb_transport_header(seg) + seg->data_len); check = csum16_add(csum16_sub(uh->check, uh->len), newlen); uh->len = newlen; -- cgit v1.2.3 From abe003b33223ff33552f291644bf35d9c2f992fb Mon Sep 17 00:00:00 2001 From: Prathamesh Deshpande Date: Sun, 10 May 2026 23:59:00 +0100 Subject: net/mlx5e: Fix eswitch mode block underflow on IPsec acquire SA mlx5e_xfrm_add_state() handles acquire-flow temporary SAs by allocating software state and skipping hardware offload setup. That path jumps to the common success label before taking the eswitch mode block. After tunnel-mode validation was moved earlier, the common success label unconditionally calls mlx5_eswitch_unblock_mode(). For acquire SAs, this decrements esw->offloads.num_block_mode without a matching increment. Return directly after installing the acquire SA offload handle, so only the paths that successfully called mlx5_eswitch_block_mode() call the matching unblock. Fixes: 22239eb258bc ("net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed") Signed-off-by: Prathamesh Deshpande Reviewed-by: Simon Horman Reviewed-by: Tariq Toukan Link: https://patch.msgid.link/20260510225903.13184-1-prathameshdeshpande7@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c index a52e12c3c95a..db260e3d1412 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c @@ -792,8 +792,10 @@ static int mlx5e_xfrm_add_state(struct net_device *dev, sa_entry->dev = dev; sa_entry->ipsec = ipsec; /* Check if this SA is originated from acquire flow temporary SA */ - if (x->xso.flags & XFRM_DEV_OFFLOAD_FLAG_ACQ) - goto out; + if (x->xso.flags & XFRM_DEV_OFFLOAD_FLAG_ACQ) { + x->xso.offload_handle = (unsigned long)sa_entry; + return 0; + } err = mlx5e_xfrm_validate_state(priv->mdev, x, extack); if (err) @@ -870,7 +872,6 @@ static int mlx5e_xfrm_add_state(struct net_device *dev, xa_unlock_bh(&ipsec->sadb); } -out: x->xso.offload_handle = (unsigned long)sa_entry; if (allow_tunnel_mode) mlx5_eswitch_unblock_encap(priv->mdev); -- cgit v1.2.3 From a3442936dd0523277e20aaf86207c574e755c634 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 15 May 2026 15:13:24 -0700 Subject: net: shaper: annotate the data races As previously discussed we don't care about making the shaper state fully RCU-compliant because the hierarchy itself can't be dumped in one go over Netlink. Let's annotate the reads and writes to make that clear. The field-by-field assignments will also be useful for the next commit which adds explicit "valid" field (which we don't want to override with the current full struct assignment). Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260515221325.1685455-2-kuba@kernel.org Signed-off-by: Jakub Kicinski --- net/shaper/shaper.c | 53 ++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 38 insertions(+), 15 deletions(-) diff --git a/net/shaper/shaper.c b/net/shaper/shaper.c index b1c65110f04d..520cefdc3d90 100644 --- a/net/shaper/shaper.c +++ b/net/shaper/shaper.c @@ -138,35 +138,58 @@ handle_nest_cancel: return -EMSGSIZE; } +static void net_shaper_copy(struct net_shaper *dst, + const struct net_shaper *src) +{ + WRITE_ONCE(dst->parent.scope, READ_ONCE(src->parent.scope)); + WRITE_ONCE(dst->parent.id, READ_ONCE(src->parent.id)); + WRITE_ONCE(dst->handle.scope, READ_ONCE(src->handle.scope)); + WRITE_ONCE(dst->handle.id, READ_ONCE(src->handle.id)); + + WRITE_ONCE(dst->metric, READ_ONCE(src->metric)); + WRITE_ONCE(dst->bw_min, READ_ONCE(src->bw_min)); + WRITE_ONCE(dst->bw_max, READ_ONCE(src->bw_max)); + WRITE_ONCE(dst->burst, READ_ONCE(src->burst)); + WRITE_ONCE(dst->priority, READ_ONCE(src->priority)); + WRITE_ONCE(dst->weight, READ_ONCE(src->weight)); + + /* private fields are only used on the write path under the lock */ + data_race(dst->leaves = src->leaves); +} + static int net_shaper_fill_one(struct sk_buff *msg, const struct net_shaper_binding *binding, const struct net_shaper *shaper, const struct genl_info *info) { + struct net_shaper cur; void *hdr; hdr = genlmsg_iput(msg, info); if (!hdr) return -EMSGSIZE; + /* Make a copy to avoid data races */ + net_shaper_copy(&cur, shaper); + if (net_shaper_fill_binding(msg, binding, NET_SHAPER_A_IFINDEX) || - net_shaper_fill_handle(msg, &shaper->parent, + net_shaper_fill_handle(msg, &cur.parent, NET_SHAPER_A_PARENT) || - net_shaper_fill_handle(msg, &shaper->handle, + net_shaper_fill_handle(msg, &cur.handle, NET_SHAPER_A_HANDLE) || - ((shaper->bw_min || shaper->bw_max || shaper->burst) && - nla_put_u32(msg, NET_SHAPER_A_METRIC, shaper->metric)) || - (shaper->bw_min && - nla_put_uint(msg, NET_SHAPER_A_BW_MIN, shaper->bw_min)) || - (shaper->bw_max && - nla_put_uint(msg, NET_SHAPER_A_BW_MAX, shaper->bw_max)) || - (shaper->burst && - nla_put_uint(msg, NET_SHAPER_A_BURST, shaper->burst)) || - (shaper->priority && - nla_put_u32(msg, NET_SHAPER_A_PRIORITY, shaper->priority)) || - (shaper->weight && - nla_put_u32(msg, NET_SHAPER_A_WEIGHT, shaper->weight))) + ((cur.bw_min || cur.bw_max || cur.burst) && + nla_put_u32(msg, NET_SHAPER_A_METRIC, cur.metric)) || + (cur.bw_min && + nla_put_uint(msg, NET_SHAPER_A_BW_MIN, cur.bw_min)) || + (cur.bw_max && + nla_put_uint(msg, NET_SHAPER_A_BW_MAX, cur.bw_max)) || + (cur.burst && + nla_put_uint(msg, NET_SHAPER_A_BURST, cur.burst)) || + (cur.priority && + nla_put_u32(msg, NET_SHAPER_A_PRIORITY, cur.priority)) || + (cur.weight && + nla_put_u32(msg, NET_SHAPER_A_WEIGHT, cur.weight))) goto nla_put_failure; genlmsg_end(msg, hdr); @@ -424,7 +447,7 @@ static void net_shaper_commit(struct net_shaper_binding *binding, /* Successful update: drop the tentative mark * and update the hierarchy container. */ - *cur = shapers[i]; + net_shaper_copy(cur, &shapers[i]); smp_wmb(); __xa_set_mark(&hierarchy->shapers, index, NET_SHAPER_VALID); } -- cgit v1.2.3 From b8d7519352ba8c6df83259295d4a3bad093cae90 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Fri, 15 May 2026 15:13:25 -0700 Subject: net: shaper: rework the VALID marking (again) Recent commit changed the semantics from NOT_VALID to VALID. I didn't realize that the flags are not stored atomically with the entry in XArray. There's still a race of reader observing a VALID mark for a slot, getting interrupted, writer replacing the entry with a different one, reader continuing, fetching the entry which is now a different pointer than the pointer for which VALID was meant. The biggest consequence of this is that we may see a UAF since net_shaper_rollback() assumed that entries without VALID can be freed without observing RCU. Looks like the XArray marks are buying us nothing at this point. Let's convert the code to an explicit valid field. The smp_load_acquire() / smp_store_release() barriers are marginally cleaner. Reported-by: Sashiko Fixes: 93954b40f6a4 ("net-shapers: implement NL set and delete operations") Reviewed-by: Simon Horman Link: https://patch.msgid.link/20260515221325.1685455-3-kuba@kernel.org Signed-off-by: Jakub Kicinski --- include/net/net_shaper.h | 1 + net/shaper/shaper.c | 45 ++++++++++++++++++--------------------------- 2 files changed, 19 insertions(+), 27 deletions(-) diff --git a/include/net/net_shaper.h b/include/net/net_shaper.h index 5c3f49b52fe9..3939b816b001 100644 --- a/include/net/net_shaper.h +++ b/include/net/net_shaper.h @@ -53,6 +53,7 @@ struct net_shaper { /* private: */ u32 leaves; /* accounted only for NODE scope */ + bool valid; struct rcu_head rcu; }; diff --git a/net/shaper/shaper.c b/net/shaper/shaper.c index 520cefdc3d90..dea9270f3e57 100644 --- a/net/shaper/shaper.c +++ b/net/shaper/shaper.c @@ -306,31 +306,24 @@ static void net_shaper_default_parent(const struct net_shaper_handle *handle, parent->id = 0; } -/* MARK_0 is already in use due to XA_FLAGS_ALLOC. The VALID mark is set on - * an entry only after the device-side configuration has completed - * successfully (see net_shaper_commit()). Lookups and dumps must filter on - * this mark to avoid exposing tentative entries inserted by - * net_shaper_pre_insert() while the driver call is still in flight. - */ -#define NET_SHAPER_VALID XA_MARK_1 - static struct net_shaper * net_shaper_lookup(struct net_shaper_binding *binding, const struct net_shaper_handle *handle) { u32 index = net_shaper_handle_to_index(handle); struct net_shaper_hierarchy *hierarchy; + struct net_shaper *cur; hierarchy = net_shaper_hierarchy_rcu(binding); - if (!hierarchy || !xa_get_mark(&hierarchy->shapers, index, - NET_SHAPER_VALID)) + if (!hierarchy) return NULL; - /* Pairs with smp_wmb() in net_shaper_commit(): if the entry is - * valid, its contents must be visible too. - */ - smp_rmb(); - return xa_load(&hierarchy->shapers, index); + cur = xa_load(&hierarchy->shapers, index); + /* Check valid before reading fields */ + if (!cur || !smp_load_acquire(&cur->valid)) + return NULL; + + return cur; } /* Allocate on demand the per device shaper's hierarchy container. @@ -444,12 +437,10 @@ static void net_shaper_commit(struct net_shaper_binding *binding, if (WARN_ON_ONCE(!cur)) continue; - /* Successful update: drop the tentative mark - * and update the hierarchy container. - */ + /* Successful update: update the hierarchy container... */ net_shaper_copy(cur, &shapers[i]); - smp_wmb(); - __xa_set_mark(&hierarchy->shapers, index, NET_SHAPER_VALID); + /* ... publish to lockless readers. */ + smp_store_release(&cur->valid, true); } xa_unlock(&hierarchy->shapers); } @@ -466,10 +457,10 @@ static void net_shaper_rollback(struct net_shaper_binding *binding) xa_lock(&hierarchy->shapers); xa_for_each(&hierarchy->shapers, index, cur) { - if (xa_get_mark(&hierarchy->shapers, index, NET_SHAPER_VALID)) + if (cur->valid) continue; __xa_erase(&hierarchy->shapers, index); - kfree(cur); + kfree_rcu(cur, rcu); } xa_unlock(&hierarchy->shapers); } @@ -882,12 +873,12 @@ int net_shaper_nl_get_dumpit(struct sk_buff *skb, goto out_unlock; for (; (shaper = xa_find(&hierarchy->shapers, &ctx->start_index, - U32_MAX, NET_SHAPER_VALID)); + U32_MAX, XA_PRESENT)); ctx->start_index++) { - /* Pairs with smp_wmb() in net_shaper_commit(): the entry - * is marked VALID, so its contents must be visible too. - */ - smp_rmb(); + /* Check valid before reading fields */ + if (!smp_load_acquire(&shaper->valid)) + continue; + ret = net_shaper_fill_one(skb, binding, shaper, info); if (ret) break; -- cgit v1.2.3 From 2b50aceafe6606ea52ed42aadd1b4d44a188aade Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 16 May 2026 00:05:13 +0100 Subject: crypto/krb5, rxrpc: Fix lack of pre-decrypt/pre-verify length checks Change the krb5 crypto library to provide facilities to precheck the length of the message about to be decrypted or verified. Fix AF_RXRPC to make use of this to validate DATA packets secured with RxGK. Fixes: 9d1d2b59341f ("rxrpc: rxgk: Implement the yfs-rxgk security class (GSSAPI)") Closes: https://sashiko.dev/#/patchset/20260511160753.607296-1-dhowells%40redhat.com Signed-off-by: David Howells cc: Herbert Xu cc: Simon Horman cc: Chuck Lever cc: linux-afs@lists.infradead.org Reviewed-by: Jeffrey Altman Tested-by: Marc Dionne Link: https://patch.msgid.link/20260515230516.2718212-2-dhowells@redhat.com Signed-off-by: Jakub Kicinski --- Documentation/crypto/krb5.rst | 17 ++++++++++---- crypto/krb5/krb5_api.c | 54 ++++++++++++++++++++++++++++++++++++++----- include/crypto/krb5.h | 9 +++++--- include/trace/events/rxrpc.h | 1 + net/rxrpc/rxgk.c | 15 ++++++++++-- 5 files changed, 81 insertions(+), 15 deletions(-) diff --git a/Documentation/crypto/krb5.rst b/Documentation/crypto/krb5.rst index beffa0133446..f62e07ac6811 100644 --- a/Documentation/crypto/krb5.rst +++ b/Documentation/crypto/krb5.rst @@ -158,13 +158,22 @@ returned. When a message has been received, the location and size of the data with the message can be determined by calling:: - void crypto_krb5_where_is_the_data(const struct krb5_enctype *krb5, - enum krb5_crypto_mode mode, - size_t *_offset, size_t *_len); + int crypto_krb5_where_is_the_data(const struct krb5_enctype *krb5, + enum krb5_crypto_mode mode, + size_t *_offset, size_t *_len); The caller provides the offset and length of the message to the function, which then alters those values to indicate the region containing the data (plus any -padding). It is up to the caller to determine how much padding there is. +padding). It is up to the caller to determine how much padding there is. The +function returns an error if the length is too small or if the mode is +unsupported. An additional function:: + + int crypto_krb5_check_data_len(const struct krb5_enctype *krb5, + enum krb5_crypto_mode mode, + size_t len, size_t min_content); + +is provided to just do a basic check that the decrypted/verified message would +have a sufficient minimum payload. Preparation Functions --------------------- diff --git a/crypto/krb5/krb5_api.c b/crypto/krb5/krb5_api.c index 23026d4206c8..c7ea40f900a7 100644 --- a/crypto/krb5/krb5_api.c +++ b/crypto/krb5/krb5_api.c @@ -134,27 +134,69 @@ EXPORT_SYMBOL(crypto_krb5_how_much_data); * Find the offset and size of the data in a secure message so that this * information can be used in the metadata buffer which will get added to the * digest by crypto_krb5_verify_mic(). + * + * Return: 0 if successful, -EBADMSG if the message is too short or -EINVAL if + * the mode is unsupported. */ -void crypto_krb5_where_is_the_data(const struct krb5_enctype *krb5, - enum krb5_crypto_mode mode, - size_t *_offset, size_t *_len) +int crypto_krb5_where_is_the_data(const struct krb5_enctype *krb5, + enum krb5_crypto_mode mode, + size_t *_offset, size_t *_len) { switch (mode) { case KRB5_CHECKSUM_MODE: + if (*_len < krb5->cksum_len) + return -EBADMSG; *_offset += krb5->cksum_len; *_len -= krb5->cksum_len; - return; + return 0; case KRB5_ENCRYPT_MODE: + if (*_len < krb5->conf_len + krb5->cksum_len) + return -EBADMSG; *_offset += krb5->conf_len; *_len -= krb5->conf_len + krb5->cksum_len; - return; + return 0; default: WARN_ON_ONCE(1); - return; + return -EINVAL; } } EXPORT_SYMBOL(crypto_krb5_where_is_the_data); +/** + * crypto_krb5_check_data_len - Check a message is big enough + * @krb5: The encoding to use. + * @mode: Mode of operation. + * @len: The length of the secure blob. + * @min_content: Minimum length of the content inside the blob. + * + * Check that a message is large enough to hold whatever bits the encryption + * type wants to glue on (nonce, checksum) plus a minimum amount of content. + * + * Return: 0 if successful, -EBADMSG if the message is too short or -EINVAL if + * the mode is unsupported. + */ +int crypto_krb5_check_data_len(const struct krb5_enctype *krb5, + enum krb5_crypto_mode mode, + size_t len, size_t min_content) +{ + switch (mode) { + case KRB5_CHECKSUM_MODE: + if (len < krb5->cksum_len || + len - krb5->cksum_len < min_content) + return -EBADMSG; + return 0; + case KRB5_ENCRYPT_MODE: + if (len < krb5->conf_len + krb5->cksum_len || + len - (krb5->conf_len + krb5->cksum_len) < min_content) + return -EBADMSG; + return 0; + default: + WARN_ON_ONCE(1); + return -EINVAL; + } +} +EXPORT_SYMBOL(crypto_krb5_check_data_len); + /* * Prepare the encryption with derived key data. */ diff --git a/include/crypto/krb5.h b/include/crypto/krb5.h index 71dd38f59be1..aac3ecf88467 100644 --- a/include/crypto/krb5.h +++ b/include/crypto/krb5.h @@ -121,9 +121,12 @@ size_t crypto_krb5_how_much_buffer(const struct krb5_enctype *krb5, size_t crypto_krb5_how_much_data(const struct krb5_enctype *krb5, enum krb5_crypto_mode mode, size_t *_buffer_size, size_t *_offset); -void crypto_krb5_where_is_the_data(const struct krb5_enctype *krb5, - enum krb5_crypto_mode mode, - size_t *_offset, size_t *_len); +int crypto_krb5_where_is_the_data(const struct krb5_enctype *krb5, + enum krb5_crypto_mode mode, + size_t *_offset, size_t *_len); +int crypto_krb5_check_data_len(const struct krb5_enctype *krb5, + enum krb5_crypto_mode mode, + size_t len, size_t min_content); struct crypto_aead *crypto_krb5_prepare_encryption(const struct krb5_enctype *krb5, const struct krb5_buffer *TK, u32 usage, gfp_t gfp); diff --git a/include/trace/events/rxrpc.h b/include/trace/events/rxrpc.h index 573f2df3a2c9..704a10de6670 100644 --- a/include/trace/events/rxrpc.h +++ b/include/trace/events/rxrpc.h @@ -71,6 +71,7 @@ EM(rxkad_abort_resp_unknown_tkt, "rxkad-resp-unknown-tkt") \ EM(rxkad_abort_resp_version, "rxkad-resp-version") \ /* RxGK security errors */ \ + EM(rxgk_abort_1_short_header, "rxgk1-short-hdr") \ EM(rxgk_abort_1_verify_mic_eproto, "rxgk1-vfy-mic-eproto") \ EM(rxgk_abort_2_decrypt_eproto, "rxgk2-dec-eproto") \ EM(rxgk_abort_2_short_data, "rxgk2-short-data") \ diff --git a/net/rxrpc/rxgk.c b/net/rxrpc/rxgk.c index 0d5e654da918..26e723052a37 100644 --- a/net/rxrpc/rxgk.c +++ b/net/rxrpc/rxgk.c @@ -480,8 +480,12 @@ static int rxgk_verify_packet_integrity(struct rxrpc_call *call, _enter(""); - crypto_krb5_where_is_the_data(gk->krb5, KRB5_CHECKSUM_MODE, - &data_offset, &data_len); + if (crypto_krb5_where_is_the_data(gk->krb5, KRB5_CHECKSUM_MODE, + &data_offset, &data_len) < 0) { + ret = rxrpc_abort_eproto(call, skb, RXGK_PACKETSHORT, + rxgk_abort_1_short_header); + goto put_gk; + } hdr = kzalloc_obj(*hdr, GFP_NOFS); if (!hdr) @@ -529,6 +533,13 @@ static int rxgk_verify_packet_encrypted(struct rxrpc_call *call, _enter(""); + if (crypto_krb5_check_data_len(gk->krb5, KRB5_ENCRYPT_MODE, + len, sizeof(hdr)) < 0) { + ret = rxrpc_abort_eproto(call, skb, RXGK_PACKETSHORT, + rxgk_abort_2_short_header); + goto error; + } + ret = rxgk_decrypt_skb(gk->krb5, gk->rx_enc, skb, &offset, &len, &ac); if (ret < 0) { if (ret != -ENOMEM) -- cgit v1.2.3 From d2bc90cf6c75cb96d2ce549be6c35efa3099d25b Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 16 May 2026 00:05:14 +0100 Subject: rxrpc: Fix DATA decrypt vs splice() by copying data to buffer in recvmsg This improves the fix for CVE-2026-43500. Fix the pagecache corruption from in-place decryption of a DATA packet transmitted locally by splice() by getting rid of the packet sharing in the I/O thread and unconditionally extracting the packet content into a bounce buffer in which the buffer is decrypted. recvmsg() (or the kernel equivalent) then copies the data from the bounce buffer to the destination buffer. The sk_buff then remains unmodified. This has an additional advantage in that the packet is then arranged in the buffer with the correct alignment required for the crypto algorithms to process directly. The performance of the crypto does seem to be a little faster and, surprisingly, the unencrypted performance doesn't seem to change much - possibly due to removing complexity from the I/O thread. Yet another advantage is that the I/O thread doesn't have to copy packets which would slow down packet distribution, ACK generation, etc.. The buffer belongs to the call and is allocated initially at 2K, sufficiently large to hold a whole jumbo subpacket, but the buffer will be increased in size if needed. However, to take this work, MSG_PEEK may cause a later packet to be decrypted into the buffer, in which case the earlier one will need re-decrypting for a subsequent recvmsg(). Note that rx_pkt_offset may legitimately see 0 as a valid offset now, so switch to using USHRT_MAX to indicate an invalid offset. Note also that I would generally prefer to replace the buffers of the current sk_buff with a new kmalloc'd buffer of the right size, ditching the old data and frags as this makes the handling of MSG_PEEK easier and removes the re-decryption issue, but this looks like quite a complicated thing to achieve. skb_morph() looks half way to what I want, but I don't want to have to allocate a new sk_buff. Fixes: d0d5c0cd1e71 ("rxrpc: Use skb_unshare() rather than skb_cow_data()") Reported-by: Hyunwoo Kim Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/ Signed-off-by: David Howells cc: Simon Horman cc: Jiayuan Chen cc: linux-afs@lists.infradead.org Reviewed-by: Jeffrey Altman Tested-by: Marc Dionne Link: https://patch.msgid.link/20260515230516.2718212-3-dhowells@redhat.com Signed-off-by: Jakub Kicinski --- net/rxrpc/ar-internal.h | 7 ++-- net/rxrpc/call_event.c | 22 +------------ net/rxrpc/call_object.c | 2 ++ net/rxrpc/insecure.c | 3 -- net/rxrpc/recvmsg.c | 68 ++++++++++++++++++++++++++++++-------- net/rxrpc/rxgk.c | 51 ++++++++++++++--------------- net/rxrpc/rxgk_common.h | 82 ++++++++++++++++++++++++++++++++++++++++++++++ net/rxrpc/rxkad.c | 86 ++++++++++++++++++------------------------------- 8 files changed, 201 insertions(+), 120 deletions(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 27c2aa2dd023..783367eea798 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -213,8 +213,6 @@ struct rxrpc_skb_priv { struct { u16 offset; /* Offset of data */ u16 len; /* Length of data */ - u8 flags; -#define RXRPC_RX_VERIFIED 0x01 }; struct { rxrpc_seq_t first_ack; /* First packet in acks table */ @@ -774,6 +772,11 @@ struct rxrpc_call { struct sk_buff_head recvmsg_queue; /* Queue of packets ready for recvmsg() */ struct sk_buff_head rx_queue; /* Queue of packets for this call to receive */ struct sk_buff_head rx_oos_queue; /* Queue of out of sequence packets */ + void *rx_dec_buffer; /* Decryption buffer */ + unsigned short rx_dec_bsize; /* rx_dec_buffer size */ + unsigned short rx_dec_offset; /* Decrypted packet data offset */ + unsigned short rx_dec_len; /* Decrypted packet data len */ + rxrpc_seq_t rx_dec_seq; /* Packet in decryption buffer */ rxrpc_seq_t rx_highest_seq; /* Higest sequence number received */ rxrpc_seq_t rx_consumed; /* Highest packet consumed */ diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c index 2b19b252225e..fec59d9338b9 100644 --- a/net/rxrpc/call_event.c +++ b/net/rxrpc/call_event.c @@ -332,27 +332,7 @@ bool rxrpc_input_call_event(struct rxrpc_call *call) saw_ack |= sp->hdr.type == RXRPC_PACKET_TYPE_ACK; - if (sp->hdr.type == RXRPC_PACKET_TYPE_DATA && - sp->hdr.securityIndex != 0 && - (skb_cloned(skb) || - skb_has_frag_list(skb) || - skb_has_shared_frag(skb))) { - /* Unshare the packet so that it can be - * modified by in-place decryption. - */ - struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC); - - if (nskb) { - rxrpc_new_skb(nskb, rxrpc_skb_new_unshared); - rxrpc_input_call_packet(call, nskb); - rxrpc_free_skb(nskb, rxrpc_skb_put_call_rx); - } else { - /* OOM - Drop the packet. */ - rxrpc_see_skb(skb, rxrpc_skb_see_unshare_nomem); - } - } else { - rxrpc_input_call_packet(call, skb); - } + rxrpc_input_call_packet(call, skb); rxrpc_free_skb(skb, rxrpc_skb_put_call_rx); did_receive = true; } diff --git a/net/rxrpc/call_object.c b/net/rxrpc/call_object.c index f035f486c139..fcb9d38bb521 100644 --- a/net/rxrpc/call_object.c +++ b/net/rxrpc/call_object.c @@ -152,6 +152,7 @@ struct rxrpc_call *rxrpc_alloc_call(struct rxrpc_sock *rx, gfp_t gfp, spin_lock_init(&call->notify_lock); refcount_set(&call->ref, 1); call->debug_id = debug_id; + call->rx_pkt_offset = USHRT_MAX; call->tx_total_len = -1; call->tx_jumbo_max = 1; call->next_rx_timo = 20 * HZ; @@ -553,6 +554,7 @@ static void rxrpc_cleanup_rx_buffers(struct rxrpc_call *call) rxrpc_purge_queue(&call->recvmsg_queue); rxrpc_purge_queue(&call->rx_queue); rxrpc_purge_queue(&call->rx_oos_queue); + kfree(call->rx_dec_buffer); } /* diff --git a/net/rxrpc/insecure.c b/net/rxrpc/insecure.c index 0a260df45d25..7a26c6097d03 100644 --- a/net/rxrpc/insecure.c +++ b/net/rxrpc/insecure.c @@ -32,9 +32,6 @@ static int none_secure_packet(struct rxrpc_call *call, struct rxrpc_txbuf *txb) static int none_verify_packet(struct rxrpc_call *call, struct sk_buff *skb) { - struct rxrpc_skb_priv *sp = rxrpc_skb(skb); - - sp->flags |= RXRPC_RX_VERIFIED; return 0; } diff --git a/net/rxrpc/recvmsg.c b/net/rxrpc/recvmsg.c index e1f7513a46db..c940600117a4 100644 --- a/net/rxrpc/recvmsg.c +++ b/net/rxrpc/recvmsg.c @@ -147,15 +147,52 @@ static void rxrpc_rotate_rx_window(struct rxrpc_call *call) } /* - * Decrypt and verify a DATA packet. + * Decrypt and verify a DATA packet. The content of the packet is pulled out + * into a flat buffer rather than decrypting in place in the skbuff. This also + * has the advantage of aligning the buffer correctly for the crypto routines. + * + * We keep track of the sequence number of the packet currently decrypted into + * the buffer in ->rx_dec_seq. If MSG_PEEK is used and steps onto a new + * packet, subsequent recvmsg() calls will have to go back and re-decrypt the + * current packet. */ static int rxrpc_verify_data(struct rxrpc_call *call, struct sk_buff *skb) { struct rxrpc_skb_priv *sp = rxrpc_skb(skb); + int ret; - if (sp->flags & RXRPC_RX_VERIFIED) - return 0; - return call->security->verify_packet(call, skb); + if (sp->len > call->rx_dec_bsize) { + /* Make sure we can hold a 1412-byte jumbo subpacket and make + * sure that the buffer size is aligned to a crypto blocksize. + */ + size_t size = clamp(round_up(sp->len, 32), 2048, 65535); + void *buffer = krealloc(call->rx_dec_buffer, size, GFP_NOFS); + + if (!buffer) + return -ENOMEM; + call->rx_dec_buffer = buffer; + call->rx_dec_bsize = size; + } + + ret = -EFAULT; + if (skb_copy_bits(skb, sp->offset, call->rx_dec_buffer, sp->len) < 0) + goto err; + + call->rx_dec_offset = 0; + call->rx_dec_len = sp->len; + call->rx_dec_seq = sp->hdr.seq; + ret = call->security->verify_packet(call, skb); + if (ret < 0) + goto err; + return 0; + +err: + kfree(call->rx_dec_buffer); + call->rx_dec_buffer = NULL; + call->rx_dec_bsize = 0; + call->rx_dec_offset = 0; + call->rx_dec_len = 0; + return ret; } /* @@ -283,16 +320,21 @@ static int rxrpc_recvmsg_data(struct socket *sock, struct rxrpc_call *call, if (msg) sock_recv_timestamp(msg, sock->sk, skb); - if (rx_pkt_offset == 0) { + if (call->rx_dec_seq != sp->hdr.seq || + !call->rx_dec_buffer) { ret2 = rxrpc_verify_data(call, skb); trace_rxrpc_recvdata(call, rxrpc_recvmsg_next, seq, - sp->offset, sp->len, ret2); + call->rx_dec_offset, + call->rx_dec_len, ret2); if (ret2 < 0) { ret = ret2; goto out; } - rx_pkt_offset = sp->offset; - rx_pkt_len = sp->len; + } + + if (rx_pkt_offset == USHRT_MAX) { + rx_pkt_offset = call->rx_dec_offset; + rx_pkt_len = call->rx_dec_len; } else { trace_rxrpc_recvdata(call, rxrpc_recvmsg_cont, seq, rx_pkt_offset, rx_pkt_len, 0); @@ -304,10 +346,10 @@ static int rxrpc_recvmsg_data(struct socket *sock, struct rxrpc_call *call, if (copy > remain) copy = remain; if (copy > 0) { - ret2 = skb_copy_datagram_iter(skb, rx_pkt_offset, iter, - copy); - if (ret2 < 0) { - ret = ret2; + ret2 = copy_to_iter(call->rx_dec_buffer + rx_pkt_offset, + copy, iter); + if (ret2 != copy) { + ret = -EFAULT; goto out; } @@ -328,7 +370,7 @@ static int rxrpc_recvmsg_data(struct socket *sock, struct rxrpc_call *call, /* The whole packet has been transferred. */ if (sp->hdr.flags & RXRPC_LAST_PACKET) ret = 1; - rx_pkt_offset = 0; + rx_pkt_offset = USHRT_MAX; rx_pkt_len = 0; skb = skb_peek_next(skb, &call->recvmsg_queue); diff --git a/net/rxrpc/rxgk.c b/net/rxrpc/rxgk.c index 26e723052a37..f81703ee7ac3 100644 --- a/net/rxrpc/rxgk.c +++ b/net/rxrpc/rxgk.c @@ -473,8 +473,9 @@ static int rxgk_verify_packet_integrity(struct rxrpc_call *call, struct rxrpc_skb_priv *sp = rxrpc_skb(skb); struct rxgk_header *hdr; struct krb5_buffer metadata; - unsigned int offset = sp->offset, len = sp->len; + unsigned int len = call->rx_dec_len; size_t data_offset = 0, data_len = len; + void *data = call->rx_dec_buffer, *p = data; u32 ac = 0; int ret = -ENOMEM; @@ -500,16 +501,15 @@ static int rxgk_verify_packet_integrity(struct rxrpc_call *call, metadata.len = sizeof(*hdr); metadata.data = hdr; - ret = rxgk_verify_mic_skb(gk->krb5, gk->rx_Kc, &metadata, - skb, &offset, &len, &ac); + ret = rxgk_verify_mic(gk->krb5, gk->rx_Kc, &metadata, &p, &len, &ac); kfree(hdr); if (ret < 0) { if (ret != -ENOMEM) rxrpc_abort_eproto(call, skb, ac, rxgk_abort_1_verify_mic_eproto); } else { - sp->offset = offset; - sp->len = len; + call->rx_dec_offset = p - data; + call->rx_dec_len = len; } put_gk: @@ -526,56 +526,53 @@ static int rxgk_verify_packet_encrypted(struct rxrpc_call *call, struct sk_buff *skb) { struct rxrpc_skb_priv *sp = rxrpc_skb(skb); - struct rxgk_header hdr; - unsigned int offset = sp->offset, len = sp->len; + struct rxgk_header *hdr; + unsigned int offset = 0, len = call->rx_dec_len; + void *data = call->rx_dec_buffer, *p = data; int ret; u32 ac = 0; _enter(""); if (crypto_krb5_check_data_len(gk->krb5, KRB5_ENCRYPT_MODE, - len, sizeof(hdr)) < 0) { + len, sizeof(*hdr)) < 0) { ret = rxrpc_abort_eproto(call, skb, RXGK_PACKETSHORT, rxgk_abort_2_short_header); goto error; } - ret = rxgk_decrypt_skb(gk->krb5, gk->rx_enc, skb, &offset, &len, &ac); + ret = rxgk_decrypt(gk->krb5, gk->rx_enc, &p, &len, &ac); if (ret < 0) { if (ret != -ENOMEM) rxrpc_abort_eproto(call, skb, ac, rxgk_abort_2_decrypt_eproto); goto error; } + offset = p - data; - if (len < sizeof(hdr)) { + if (len < sizeof(*hdr)) { ret = rxrpc_abort_eproto(call, skb, RXGK_PACKETSHORT, rxgk_abort_2_short_header); goto error; } /* Extract the header from the skb */ - ret = skb_copy_bits(skb, offset, &hdr, sizeof(hdr)); - if (ret < 0) { - ret = rxrpc_abort_eproto(call, skb, RXGK_PACKETSHORT, - rxgk_abort_2_short_encdata); - goto error; - } - offset += sizeof(hdr); - len -= sizeof(hdr); - - if (ntohl(hdr.epoch) != call->conn->proto.epoch || - ntohl(hdr.cid) != call->cid || - ntohl(hdr.call_number) != call->call_id || - ntohl(hdr.seq) != sp->hdr.seq || - ntohl(hdr.sec_index) != call->security_ix || - ntohl(hdr.data_len) > len) { + hdr = data + offset; + offset += sizeof(*hdr); + len -= sizeof(*hdr); + + if (ntohl(hdr->epoch) != call->conn->proto.epoch || + ntohl(hdr->cid) != call->cid || + ntohl(hdr->call_number) != call->call_id || + ntohl(hdr->seq) != sp->hdr.seq || + ntohl(hdr->sec_index) != call->security_ix || + ntohl(hdr->data_len) > len) { ret = rxrpc_abort_eproto(call, skb, RXGK_SEALEDINCON, rxgk_abort_2_short_data); goto error; } - sp->offset = offset; - sp->len = ntohl(hdr.data_len); + call->rx_dec_offset = offset; + call->rx_dec_len = ntohl(hdr->data_len); ret = 0; error: rxgk_put(gk); diff --git a/net/rxrpc/rxgk_common.h b/net/rxrpc/rxgk_common.h index 1e257d7ab8ec..112b5366ce11 100644 --- a/net/rxrpc/rxgk_common.h +++ b/net/rxrpc/rxgk_common.h @@ -105,6 +105,49 @@ int rxgk_decrypt_skb(const struct krb5_enctype *krb5, return ret; } +/* + * Apply decryption and checksumming functions a flat data buffer. The data + * point and length are updated to reflect the actual content of the encrypted + * region. + */ +static inline int rxgk_decrypt(const struct krb5_enctype *krb5, + struct crypto_aead *aead, + void **_data, unsigned int *_len, + int *_error_code) +{ + struct scatterlist sg[1]; + size_t offset = 0, len = *_len; + int ret; + + sg_init_one(sg, *_data, len); + + ret = crypto_krb5_decrypt(krb5, aead, sg, 1, &offset, &len); + switch (ret) { + case 0: + if (offset & 3) { + *_error_code = RXGK_INCONSISTENCY; + ret = -EPROTO; + break; + } + *_data += offset; + *_len = len; + break; + case -EBADMSG: /* Checksum mismatch. */ + case -EPROTO: + *_error_code = RXGK_SEALEDINCON; + break; + case -EMSGSIZE: + *_error_code = RXGK_PACKETSHORT; + break; + case -ENOPKG: /* Would prefer RXGK_BADETYPE, but not available for YFS. */ + default: + *_error_code = RXGK_INCONSISTENCY; + break; + } + + return ret; +} + /* * Check the MIC on a region of an skbuff. The offset and length are updated * to reflect the actual content of the secure region. @@ -148,3 +191,42 @@ int rxgk_verify_mic_skb(const struct krb5_enctype *krb5, return ret; } + +/* + * Check the MIC on a flat buffer. The data pointer and length are updated to + * reflect the actual content of the secure region. + */ +static inline +int rxgk_verify_mic(const struct krb5_enctype *krb5, + struct crypto_shash *shash, + const struct krb5_buffer *metadata, + void **_data, unsigned int *_len, + u32 *_error_code) +{ + struct scatterlist sg[1]; + size_t offset = 0, len = *_len; + int ret; + + sg_init_one(sg, *_data, len); + + ret = crypto_krb5_verify_mic(krb5, shash, metadata, sg, 1, &offset, &len); + switch (ret) { + case 0: + *_data += offset; + *_len = len; + break; + case -EBADMSG: /* Checksum mismatch */ + case -EPROTO: + *_error_code = RXGK_SEALEDINCON; + break; + case -EMSGSIZE: + *_error_code = RXGK_PACKETSHORT; + break; + case -ENOPKG: /* Would prefer RXGK_BADETYPE, but not available for YFS. */ + default: + *_error_code = RXGK_INCONSISTENCY; + break; + } + + return ret; +} diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c index cba7935977f0..075936337836 100644 --- a/net/rxrpc/rxkad.c +++ b/net/rxrpc/rxkad.c @@ -430,27 +430,25 @@ static int rxkad_verify_packet_1(struct rxrpc_call *call, struct sk_buff *skb, rxrpc_seq_t seq, struct skcipher_request *req) { - struct rxkad_level1_hdr sechdr; + struct rxkad_level1_hdr *sechdr; struct rxrpc_skb_priv *sp = rxrpc_skb(skb); struct rxrpc_crypt iv; - struct scatterlist sg[16]; - u32 data_size, buf; + struct scatterlist sg[1]; + void *data = call->rx_dec_buffer; + u32 len = sp->len, data_size, buf; u16 check; int ret; _enter(""); - if (sp->len < 8) + if (len < 8) return rxrpc_abort_eproto(call, skb, RXKADSEALEDINCON, rxkad_abort_1_short_header); /* Decrypt the skbuff in-place. TODO: We really want to decrypt * directly into the target buffer. */ - sg_init_table(sg, ARRAY_SIZE(sg)); - ret = skb_to_sgvec(skb, sg, sp->offset, 8); - if (unlikely(ret < 0)) - return ret; + sg_init_one(sg, data, len); /* start the decryption afresh */ memset(&iv, 0, sizeof(iv)); @@ -464,13 +462,11 @@ static int rxkad_verify_packet_1(struct rxrpc_call *call, struct sk_buff *skb, return ret; /* Extract the decrypted packet length */ - if (skb_copy_bits(skb, sp->offset, &sechdr, sizeof(sechdr)) < 0) - return rxrpc_abort_eproto(call, skb, RXKADDATALEN, - rxkad_abort_1_short_encdata); - sp->offset += sizeof(sechdr); - sp->len -= sizeof(sechdr); + sechdr = data; + call->rx_dec_offset = sizeof(*sechdr); + len -= sizeof(*sechdr); - buf = ntohl(sechdr.data_size); + buf = ntohl(sechdr->data_size); data_size = buf & 0xffff; check = buf >> 16; @@ -479,10 +475,10 @@ static int rxkad_verify_packet_1(struct rxrpc_call *call, struct sk_buff *skb, if (check != 0) return rxrpc_abort_eproto(call, skb, RXKADSEALEDINCON, rxkad_abort_1_short_check); - if (data_size > sp->len) + if (data_size > len) return rxrpc_abort_eproto(call, skb, RXKADDATALEN, rxkad_abort_1_short_data); - sp->len = data_size; + call->rx_dec_len = data_size; _leave(" = 0 [dlen=%x]", data_size); return 0; @@ -496,43 +492,28 @@ static int rxkad_verify_packet_2(struct rxrpc_call *call, struct sk_buff *skb, struct skcipher_request *req) { const struct rxrpc_key_token *token; - struct rxkad_level2_hdr sechdr; + struct rxkad_level2_hdr *sechdr; struct rxrpc_skb_priv *sp = rxrpc_skb(skb); struct rxrpc_crypt iv; - struct scatterlist _sg[4], *sg; - u32 data_size, buf; + struct scatterlist sg[1]; + void *data = call->rx_dec_buffer; + u32 len = sp->len, data_size, buf; u16 check; - int nsg, ret; + int ret; - _enter(",{%d}", sp->len); + _enter(",{%d}", len); - if (sp->len < 8) + if (len < 8) return rxrpc_abort_eproto(call, skb, RXKADSEALEDINCON, rxkad_abort_2_short_header); /* Don't let the crypto algo see a misaligned length. */ - sp->len = round_down(sp->len, 8); + len = round_down(len, 8); - /* Decrypt the skbuff in-place. TODO: We really want to decrypt - * directly into the target buffer. + /* Decrypt in place in the call's decryption buffer. TODO: We really + * want to decrypt directly into the target buffer. */ - sg = _sg; - nsg = skb_shinfo(skb)->nr_frags + 1; - if (nsg <= 4) { - nsg = 4; - } else { - sg = kmalloc_objs(*sg, nsg, GFP_NOIO); - if (!sg) - return -ENOMEM; - } - - sg_init_table(sg, nsg); - ret = skb_to_sgvec(skb, sg, sp->offset, sp->len); - if (unlikely(ret < 0)) { - if (sg != _sg) - kfree(sg); - return ret; - } + sg_init_one(sg, data, len); /* decrypt from the session key */ token = call->conn->key->payload.data[0]; @@ -540,11 +521,9 @@ static int rxkad_verify_packet_2(struct rxrpc_call *call, struct sk_buff *skb, skcipher_request_set_sync_tfm(req, call->conn->rxkad.cipher); skcipher_request_set_callback(req, 0, NULL, NULL); - skcipher_request_set_crypt(req, sg, sg, sp->len, iv.x); + skcipher_request_set_crypt(req, sg, sg, len, iv.x); ret = crypto_skcipher_decrypt(req); skcipher_request_zero(req); - if (sg != _sg) - kfree(sg); if (ret < 0) { if (ret == -ENOMEM) return ret; @@ -553,13 +532,11 @@ static int rxkad_verify_packet_2(struct rxrpc_call *call, struct sk_buff *skb, } /* Extract the decrypted packet length */ - if (skb_copy_bits(skb, sp->offset, &sechdr, sizeof(sechdr)) < 0) - return rxrpc_abort_eproto(call, skb, RXKADDATALEN, - rxkad_abort_2_short_len); - sp->offset += sizeof(sechdr); - sp->len -= sizeof(sechdr); + sechdr = data; + call->rx_dec_offset = sizeof(*sechdr); + len -= sizeof(*sechdr); - buf = ntohl(sechdr.data_size); + buf = ntohl(sechdr->data_size); data_size = buf & 0xffff; check = buf >> 16; @@ -569,17 +546,18 @@ static int rxkad_verify_packet_2(struct rxrpc_call *call, struct sk_buff *skb, return rxrpc_abort_eproto(call, skb, RXKADSEALEDINCON, rxkad_abort_2_short_check); - if (data_size > sp->len) + if (data_size > len) return rxrpc_abort_eproto(call, skb, RXKADDATALEN, rxkad_abort_2_short_data); - sp->len = data_size; + call->rx_dec_len = data_size; _leave(" = 0 [dlen=%x]", data_size); return 0; } /* - * Verify the security on a received packet and the subpackets therein. + * Verify the security on a received (sub)packet. If the packet needs + * modifying (e.g. decrypting), it must be copied. */ static int rxkad_verify_packet(struct rxrpc_call *call, struct sk_buff *skb) { -- cgit v1.2.3 From 8bfab4b6ffc2fe92da86300728fc8c3c7ebffb56 Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 16 May 2026 00:05:15 +0100 Subject: rxrpc: Fix RESPONSE packet verification to extract skb to a linear buffer This improves the fix for CVE-2026-43500. Fix the verification of RESPONSE packets to avoid the problem of overwriting a RESPONSE packet sent via splice to a local address by extracting the contents of the UDP packet into a kmalloc'd linear buffer rather than decrypting the data in place in the sk_buff (which may corrupt the original buffer). Fixes: 24481a7f5733 ("rxrpc: Fix conn-level packet handling to unshare RESPONSE packets") Reported-by: Hyunwoo Kim Closes: https://lore.kernel.org/r/afKV2zGR6rrelPC7@v4bel/ Signed-off-by: David Howells cc: Simon Horman cc: Jiayuan Chen cc: linux-afs@lists.infradead.org cc: stable@kernel.org Reviewed-by: Jeffrey Altman Tested-by: Marc Dionne Link: https://patch.msgid.link/20260515230516.2718212-4-dhowells@redhat.com Signed-off-by: Jakub Kicinski --- net/rxrpc/ar-internal.h | 7 ++-- net/rxrpc/conn_event.c | 32 +++++++---------- net/rxrpc/insecure.c | 5 +-- net/rxrpc/rxgk.c | 96 ++++++++++++++++--------------------------------- net/rxrpc/rxgk_app.c | 46 ++++++++++-------------- net/rxrpc/rxgk_common.h | 92 ++--------------------------------------------- net/rxrpc/rxkad.c | 29 ++++++--------- 7 files changed, 82 insertions(+), 225 deletions(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index 783367eea798..98f2165159d7 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -307,15 +307,16 @@ struct rxrpc_security { struct sk_buff *challenge); /* verify a response */ - int (*verify_response)(struct rxrpc_connection *, - struct sk_buff *); + int (*verify_response)(struct rxrpc_connection *conn, + struct sk_buff *response_skb, + void *response, unsigned int len); /* clear connection security */ void (*clear)(struct rxrpc_connection *); /* Default ticket -> key decoder */ int (*default_decode_ticket)(struct rxrpc_connection *conn, struct sk_buff *skb, - unsigned int ticket_offset, unsigned int ticket_len, + void *ticket, unsigned int ticket_len, struct key **_key); }; diff --git a/net/rxrpc/conn_event.c b/net/rxrpc/conn_event.c index 442414d90ba1..c96ca615b787 100644 --- a/net/rxrpc/conn_event.c +++ b/net/rxrpc/conn_event.c @@ -243,28 +243,22 @@ static void rxrpc_call_is_secure(struct rxrpc_call *call) static int rxrpc_verify_response(struct rxrpc_connection *conn, struct sk_buff *skb) { + unsigned int len = skb->len - sizeof(struct rxrpc_wire_header); + void *buffer; int ret; - if (skb_cloned(skb) || skb_has_frag_list(skb) || - skb_has_shared_frag(skb)) { - /* Copy the packet if shared so that we can do in-place - * decryption. - */ - struct sk_buff *nskb = skb_copy(skb, GFP_NOFS); - - if (nskb) { - rxrpc_new_skb(nskb, rxrpc_skb_new_unshared); - ret = conn->security->verify_response(conn, nskb); - rxrpc_free_skb(nskb, rxrpc_skb_put_response_copy); - } else { - /* OOM - Drop the packet. */ - rxrpc_see_skb(skb, rxrpc_skb_see_unshare_nomem); - ret = -ENOMEM; - } - } else { - ret = conn->security->verify_response(conn, skb); - } + buffer = kmalloc(len, GFP_NOFS); + if (!buffer) + return -ENOMEM; + + ret = skb_copy_bits(skb, sizeof(struct rxrpc_wire_header), buffer, len); + if (ret < 0) + goto out; + + ret = conn->security->verify_response(conn, skb, buffer, len); +out: + kfree(buffer); return ret; } diff --git a/net/rxrpc/insecure.c b/net/rxrpc/insecure.c index 7a26c6097d03..0b39046bdc61 100644 --- a/net/rxrpc/insecure.c +++ b/net/rxrpc/insecure.c @@ -54,9 +54,10 @@ static int none_sendmsg_respond_to_challenge(struct sk_buff *challenge, } static int none_verify_response(struct rxrpc_connection *conn, - struct sk_buff *skb) + struct sk_buff *response_skb, + void *response, unsigned int len) { - return rxrpc_abort_conn(conn, skb, RX_PROTOCOL_ERROR, -EPROTO, + return rxrpc_abort_conn(conn, response_skb, RX_PROTOCOL_ERROR, -EPROTO, rxrpc_eproto_rxnull_response); } diff --git a/net/rxrpc/rxgk.c b/net/rxrpc/rxgk.c index f81703ee7ac3..a1ee102abae1 100644 --- a/net/rxrpc/rxgk.c +++ b/net/rxrpc/rxgk.c @@ -1084,11 +1084,12 @@ static int rxgk_sendmsg_respond_to_challenge(struct sk_buff *challenge, * unsigned int call_numbers<>; * }; */ -static int rxgk_do_verify_authenticator(struct rxrpc_connection *conn, - const struct krb5_enctype *krb5, - struct sk_buff *skb, - __be32 *p, __be32 *end) +static int rxgk_verify_authenticator(struct rxrpc_connection *conn, + const struct krb5_enctype *krb5, + struct sk_buff *skb, + void *auth, unsigned int auth_len) { + __be32 *p = auth, *end = auth + auth_len; u32 app_len, call_count, level, epoch, cid, i; _enter(""); @@ -1151,37 +1152,6 @@ static int rxgk_do_verify_authenticator(struct rxrpc_connection *conn, return 0; } -/* - * Extract the authenticator and verify it. - */ -static int rxgk_verify_authenticator(struct rxrpc_connection *conn, - const struct krb5_enctype *krb5, - struct sk_buff *skb, - unsigned int auth_offset, unsigned int auth_len) -{ - void *auth; - __be32 *p; - int ret; - - auth = kmalloc(auth_len, GFP_NOFS); - if (!auth) - return -ENOMEM; - - ret = skb_copy_bits(skb, auth_offset, auth, auth_len); - if (ret < 0) { - ret = rxrpc_abort_conn(conn, skb, RXGK_NOTAUTH, -EPROTO, - rxgk_abort_resp_short_auth); - goto error; - } - - p = auth; - ret = rxgk_do_verify_authenticator(conn, krb5, skb, p, - p + auth_len / sizeof(*p)); -error: - kfree(auth); - return ret; -} - /* * Verify a response. * @@ -1192,49 +1162,45 @@ error: * }; */ static int rxgk_verify_response(struct rxrpc_connection *conn, - struct sk_buff *skb) + struct sk_buff *skb, + void *buffer, unsigned int len) { const struct krb5_enctype *krb5; struct rxrpc_key_token *token; struct rxrpc_skb_priv *sp = rxrpc_skb(skb); - struct rxgk_response rhdr; + struct rxgk_response *rhdr; struct rxgk_context *gk; struct key *key = NULL; - unsigned int offset = sizeof(struct rxrpc_wire_header); - unsigned int len = skb->len - sizeof(struct rxrpc_wire_header); - unsigned int token_offset, token_len; - unsigned int auth_offset, auth_len; + unsigned int resp_token_len, auth_len; + void *resp_token, *auth; __be32 xauth_len; int ret, ec; _enter("{%d}", conn->debug_id); /* Parse the RXGK_Response object */ - if (sizeof(rhdr) + sizeof(__be32) > len) - goto short_packet; - - if (skb_copy_bits(skb, offset, &rhdr, sizeof(rhdr)) < 0) + if (len < sizeof(*rhdr) + sizeof(__be32)) goto short_packet; - offset += sizeof(rhdr); - len -= sizeof(rhdr); - - token_offset = offset; - token_len = ntohl(rhdr.token_len); - if (token_len > len || - xdr_round_up(token_len) + sizeof(__be32) > len) + rhdr = buffer; + buffer += sizeof(*rhdr); + len -= sizeof(*rhdr); + + resp_token = buffer; + resp_token_len = ntohl(rhdr->token_len); + if (resp_token_len > len || + xdr_round_up(resp_token_len) + sizeof(__be32) > len) goto short_packet; - trace_rxrpc_rx_response(conn, sp->hdr.serial, 0, sp->hdr.cksum, token_len); + trace_rxrpc_rx_response(conn, sp->hdr.serial, 0, sp->hdr.cksum, resp_token_len); - offset += xdr_round_up(token_len); - len -= xdr_round_up(token_len); + buffer += xdr_round_up(resp_token_len); + len -= xdr_round_up(resp_token_len); - if (skb_copy_bits(skb, offset, &xauth_len, sizeof(xauth_len)) < 0) - goto short_packet; - offset += sizeof(xauth_len); + xauth_len = *(__be32 *)buffer; + buffer += sizeof(xauth_len); len -= sizeof(xauth_len); - auth_offset = offset; + auth = buffer; auth_len = ntohl(xauth_len); if (auth_len > len) goto short_packet; @@ -1249,7 +1215,7 @@ static int rxgk_verify_response(struct rxrpc_connection *conn, * to the app to deal with - which might mean a round trip to * userspace. */ - ret = rxgk_extract_token(conn, skb, token_offset, token_len, &key); + ret = rxgk_extract_token(conn, skb, resp_token, resp_token_len, &key); if (ret < 0) goto out; @@ -1263,7 +1229,7 @@ static int rxgk_verify_response(struct rxrpc_connection *conn, */ token = key->payload.data[0]; conn->security_level = token->rxgk->level; - conn->rxgk.start_time = __be64_to_cpu(rhdr.start_time); + conn->rxgk.start_time = __be64_to_cpu(rhdr->start_time); gk = rxgk_generate_transport_key(conn, token->rxgk, sp->hdr.cksum, GFP_NOFS); if (IS_ERR(gk)) { @@ -1273,18 +1239,18 @@ static int rxgk_verify_response(struct rxrpc_connection *conn, krb5 = gk->krb5; - trace_rxrpc_rx_response(conn, sp->hdr.serial, krb5->etype, sp->hdr.cksum, token_len); + trace_rxrpc_rx_response(conn, sp->hdr.serial, krb5->etype, sp->hdr.cksum, + resp_token_len); /* Decrypt, parse and verify the authenticator. */ - ret = rxgk_decrypt_skb(krb5, gk->resp_enc, skb, - &auth_offset, &auth_len, &ec); + ret = rxgk_decrypt(krb5, gk->resp_enc, &auth, &auth_len, &ec); if (ret < 0) { rxrpc_abort_conn(conn, skb, RXGK_SEALEDINCON, ret, rxgk_abort_resp_auth_dec); goto out_gk; } - ret = rxgk_verify_authenticator(conn, krb5, skb, auth_offset, auth_len); + ret = rxgk_verify_authenticator(conn, krb5, skb, auth, auth_len); if (ret < 0) goto out_gk; diff --git a/net/rxrpc/rxgk_app.c b/net/rxrpc/rxgk_app.c index 0ef2a29eb695..200a30064fae 100644 --- a/net/rxrpc/rxgk_app.c +++ b/net/rxrpc/rxgk_app.c @@ -40,7 +40,7 @@ * }; */ int rxgk_yfs_decode_ticket(struct rxrpc_connection *conn, struct sk_buff *skb, - unsigned int ticket_offset, unsigned int ticket_len, + void *buffer, unsigned int ticket_len, struct key **_key) { struct rxrpc_key_token *token; @@ -49,7 +49,7 @@ int rxgk_yfs_decode_ticket(struct rxrpc_connection *conn, struct sk_buff *skb, size_t pre_ticket_len, payload_len; unsigned int klen, enctype; void *payload, *ticket; - __be32 *t, *p, *q, tmp[2]; + __be32 *t, *p, *q, *tmp; int ret; _enter(""); @@ -59,10 +59,7 @@ int rxgk_yfs_decode_ticket(struct rxrpc_connection *conn, struct sk_buff *skb, rxgk_abort_resp_short_yfs_tkt); /* Get the session key length */ - ret = skb_copy_bits(skb, ticket_offset, tmp, sizeof(tmp)); - if (ret < 0) - return rxrpc_abort_conn(conn, skb, RXGK_INCONSISTENCY, -EPROTO, - rxgk_abort_resp_short_yfs_klen); + tmp = buffer; enctype = ntohl(tmp[0]); klen = ntohl(tmp[1]); @@ -84,12 +81,7 @@ int rxgk_yfs_decode_ticket(struct rxrpc_connection *conn, struct sk_buff *skb, * it. */ ticket = payload + pre_ticket_len; - ret = skb_copy_bits(skb, ticket_offset, ticket, ticket_len); - if (ret < 0) { - ret = rxrpc_abort_conn(conn, skb, RXGK_INCONSISTENCY, -EPROTO, - rxgk_abort_resp_short_yfs_tkt); - goto error; - } + memcpy(ticket, buffer, ticket_len); /* Fill out the form header. */ p = payload; @@ -131,7 +123,7 @@ int rxgk_yfs_decode_ticket(struct rxrpc_connection *conn, struct sk_buff *skb, goto error; } - /* Ticket read in with skb_copy_bits above */ + /* Ticket appended above. */ q += xdr_round_up(ticket_len) / 4; if (WARN_ON((unsigned long)q - (unsigned long)payload != payload_len)) { ret = -EIO; @@ -182,14 +174,15 @@ error: * [tools.ietf.org/html/draft-wilkinson-afs3-rxgk-afs-08 sec 6.1] */ int rxgk_extract_token(struct rxrpc_connection *conn, struct sk_buff *skb, - unsigned int token_offset, unsigned int token_len, + void *token, unsigned int token_len, struct key **_key) { const struct krb5_enctype *krb5; const struct krb5_buffer *server_secret; struct crypto_aead *token_enc = NULL; struct key *server_key; - unsigned int ticket_offset, ticket_len; + unsigned int ticket_len; + void *ticket; u32 kvno, enctype; int ret, ec = 0; @@ -197,24 +190,23 @@ int rxgk_extract_token(struct rxrpc_connection *conn, struct sk_buff *skb, __be32 kvno; __be32 enctype; __be32 token_len; - } container; + } *container; - if (token_len < sizeof(container)) + if (token_len < sizeof(*container)) goto short_packet; /* Decode the RXGK_TokenContainer object. This tells us which server * key we should be using. We can then fetch the key, get the secret * and set up the crypto to extract the token. */ - if (skb_copy_bits(skb, token_offset, &container, sizeof(container)) < 0) - goto short_packet; + container = token; + token += sizeof(*container); - kvno = ntohl(container.kvno); - enctype = ntohl(container.enctype); - ticket_len = ntohl(container.token_len); - ticket_offset = token_offset + sizeof(container); + kvno = ntohl(container->kvno); + enctype = ntohl(container->enctype); + ticket_len = ntohl(container->token_len); - if (ticket_len > xdr_round_down(token_len - sizeof(container))) + if (ticket_len > xdr_round_down(token_len - sizeof(*container))) goto short_packet; _debug("KVNO %u", kvno); @@ -237,8 +229,8 @@ int rxgk_extract_token(struct rxrpc_connection *conn, struct sk_buff *skb, * gain access to K0, from which we can derive the transport key and * thence decode the authenticator. */ - ret = rxgk_decrypt_skb(krb5, token_enc, skb, - &ticket_offset, &ticket_len, &ec); + ticket = token; + ret = rxgk_decrypt(krb5, token_enc, &ticket, &ticket_len, &ec); crypto_free_aead(token_enc); token_enc = NULL; if (ret < 0) { @@ -248,7 +240,7 @@ int rxgk_extract_token(struct rxrpc_connection *conn, struct sk_buff *skb, return ret; } - ret = conn->security->default_decode_ticket(conn, skb, ticket_offset, + ret = conn->security->default_decode_ticket(conn, skb, ticket, ticket_len, _key); if (ret < 0) goto cant_get_token; diff --git a/net/rxrpc/rxgk_common.h b/net/rxrpc/rxgk_common.h index 112b5366ce11..3deed5863f5a 100644 --- a/net/rxrpc/rxgk_common.h +++ b/net/rxrpc/rxgk_common.h @@ -41,10 +41,10 @@ struct rxgk_context { * rxgk_app.c */ int rxgk_yfs_decode_ticket(struct rxrpc_connection *conn, struct sk_buff *skb, - unsigned int ticket_offset, unsigned int ticket_len, + void *ticket, unsigned int ticket_len, struct key **_key); int rxgk_extract_token(struct rxrpc_connection *conn, struct sk_buff *skb, - unsigned int token_offset, unsigned int token_len, + void *token, unsigned int token_len, struct key **_key); /* @@ -61,50 +61,6 @@ int rxgk_set_up_token_cipher(const struct krb5_buffer *server_key, const struct krb5_enctype **_krb5, gfp_t gfp); -/* - * Apply decryption and checksumming functions to part of an skbuff. The - * offset and length are updated to reflect the actual content of the encrypted - * region. - */ -static inline -int rxgk_decrypt_skb(const struct krb5_enctype *krb5, - struct crypto_aead *aead, - struct sk_buff *skb, - unsigned int *_offset, unsigned int *_len, - int *_error_code) -{ - struct scatterlist sg[16]; - size_t offset = 0, len = *_len; - int nr_sg, ret; - - sg_init_table(sg, ARRAY_SIZE(sg)); - nr_sg = skb_to_sgvec(skb, sg, *_offset, len); - if (unlikely(nr_sg < 0)) - return nr_sg; - - ret = crypto_krb5_decrypt(krb5, aead, sg, nr_sg, - &offset, &len); - switch (ret) { - case 0: - *_offset += offset; - *_len = len; - break; - case -EBADMSG: /* Checksum mismatch. */ - case -EPROTO: - *_error_code = RXGK_SEALEDINCON; - break; - case -EMSGSIZE: - *_error_code = RXGK_PACKETSHORT; - break; - case -ENOPKG: /* Would prefer RXGK_BADETYPE, but not available for YFS. */ - default: - *_error_code = RXGK_INCONSISTENCY; - break; - } - - return ret; -} - /* * Apply decryption and checksumming functions a flat data buffer. The data * point and length are updated to reflect the actual content of the encrypted @@ -148,50 +104,6 @@ static inline int rxgk_decrypt(const struct krb5_enctype *krb5, return ret; } -/* - * Check the MIC on a region of an skbuff. The offset and length are updated - * to reflect the actual content of the secure region. - */ -static inline -int rxgk_verify_mic_skb(const struct krb5_enctype *krb5, - struct crypto_shash *shash, - const struct krb5_buffer *metadata, - struct sk_buff *skb, - unsigned int *_offset, unsigned int *_len, - u32 *_error_code) -{ - struct scatterlist sg[16]; - size_t offset = 0, len = *_len; - int nr_sg, ret; - - sg_init_table(sg, ARRAY_SIZE(sg)); - nr_sg = skb_to_sgvec(skb, sg, *_offset, len); - if (unlikely(nr_sg < 0)) - return nr_sg; - - ret = crypto_krb5_verify_mic(krb5, shash, metadata, sg, nr_sg, - &offset, &len); - switch (ret) { - case 0: - *_offset += offset; - *_len = len; - break; - case -EBADMSG: /* Checksum mismatch */ - case -EPROTO: - *_error_code = RXGK_SEALEDINCON; - break; - case -EMSGSIZE: - *_error_code = RXGK_PACKETSHORT; - break; - case -ENOPKG: /* Would prefer RXGK_BADETYPE, but not available for YFS. */ - default: - *_error_code = RXGK_INCONSISTENCY; - break; - } - - return ret; -} - /* * Check the MIC on a flat buffer. The data pointer and length are updated to * reflect the actual content of the secure region. diff --git a/net/rxrpc/rxkad.c b/net/rxrpc/rxkad.c index 075936337836..6fbd883401ac 100644 --- a/net/rxrpc/rxkad.c +++ b/net/rxrpc/rxkad.c @@ -963,7 +963,6 @@ static int rxkad_decrypt_ticket(struct rxrpc_connection *conn, *_expiry = 0; ASSERT(server_key->payload.data[0] != NULL); - ASSERTCMP((unsigned long) ticket & 7UL, ==, 0); memcpy(&iv, &server_key->payload.data[2], sizeof(iv)); @@ -1112,14 +1111,15 @@ unlock: * verify a response */ static int rxkad_verify_response(struct rxrpc_connection *conn, - struct sk_buff *skb) + struct sk_buff *skb, + void *buffer, unsigned int len) { struct rxkad_response *response; struct rxrpc_skb_priv *sp = rxrpc_skb(skb); struct rxrpc_crypt session_key; struct key *server_key; time64_t expiry; - void *ticket = NULL; + void *ticket; u32 version, kvno, ticket_len, level; __be32 csum; int ret, i; @@ -1142,13 +1142,8 @@ static int rxkad_verify_response(struct rxrpc_connection *conn, } } - ret = -ENOMEM; - response = kzalloc_obj(struct rxkad_response, GFP_NOFS); - if (!response) - goto error; - - if (skb_copy_bits(skb, sizeof(struct rxrpc_wire_header), - response, sizeof(*response)) < 0) { + response = buffer; + if (len < sizeof(*response)) { ret = rxrpc_abort_conn(conn, skb, RXKADPACKETSHORT, -EPROTO, rxkad_abort_resp_short); goto error; @@ -1160,6 +1155,9 @@ static int rxkad_verify_response(struct rxrpc_connection *conn, trace_rxrpc_rx_response(conn, sp->hdr.serial, version, kvno, ticket_len); + buffer += sizeof(*response); + len -= sizeof(*response); + if (version != RXKAD_VERSION) { ret = rxrpc_abort_conn(conn, skb, RXKADINCONSISTENCY, -EPROTO, rxkad_abort_resp_version); @@ -1179,13 +1177,8 @@ static int rxkad_verify_response(struct rxrpc_connection *conn, } /* extract the kerberos ticket and decrypt and decode it */ - ret = -ENOMEM; - ticket = kmalloc(ticket_len, GFP_NOFS); - if (!ticket) - goto error; - - if (skb_copy_bits(skb, sizeof(struct rxrpc_wire_header) + sizeof(*response), - ticket, ticket_len) < 0) { + ticket = buffer; + if (ticket_len > len) { ret = rxrpc_abort_conn(conn, skb, RXKADPACKETSHORT, -EPROTO, rxkad_abort_resp_short_tkt); goto error; @@ -1265,8 +1258,6 @@ static int rxkad_verify_response(struct rxrpc_connection *conn, ret = rxrpc_get_server_data_key(conn, &session_key, expiry, kvno); error: - kfree(ticket); - kfree(response); key_put(server_key); _leave(" = %d", ret); return ret; -- cgit v1.2.3 From e7c70bf97e90d974cd575e4c90f8f9b07d056da3 Mon Sep 17 00:00:00 2001 From: Rosen Penev Date: Sat, 16 May 2026 14:26:16 -0700 Subject: net: ag71xx: check error for platform_get_irq Complete error handling for a failed platform_get_irq() call Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Rosen Penev Reviewed-by: Oleksij Rempel Link: https://patch.msgid.link/20260516212616.11758-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/atheros/ag71xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/atheros/ag71xx.c b/drivers/net/ethernet/atheros/ag71xx.c index a5ab99474179..4e4794c4dfdc 100644 --- a/drivers/net/ethernet/atheros/ag71xx.c +++ b/drivers/net/ethernet/atheros/ag71xx.c @@ -1856,6 +1856,9 @@ static int ag71xx_probe(struct platform_device *pdev) ag71xx_int_disable(ag, AG71XX_INT_POLL); ndev->irq = platform_get_irq(pdev, 0); + if (ndev->irq < 0) + return ndev->irq; + err = devm_request_irq(&pdev->dev, ndev->irq, ag71xx_interrupt, 0x0, dev_name(&pdev->dev), ndev); if (err) { -- cgit v1.2.3 From ddf8029623a1af20e984c040e89ff918158397ab Mon Sep 17 00:00:00 2001 From: Xingwang Xiang Date: Sun, 17 May 2026 23:56:26 +0900 Subject: bpf, skmsg: fix verdict sk_data_ready racing with ktls rx sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and defers to psock->saved_data_ready when a TLS RX context is present, avoiding a conflict with the TLS strparser's ownership of the receive queue (commit e91de6afa81c, "bpf: Fix running sk_skb program types with ktls"). sk_psock_verdict_data_ready() has no equivalent guard. When a socket is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready as rx_ctx->saved_data_ready. On data arrival: tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready -> saved_data_ready() = sk_psock_verdict_data_ready() -> tcp_read_skb() drains sk_receive_queue via __skb_unlink() without calling tcp_eat_skb(), so copied_seq is not advanced. tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned (potentially freed) skb. tls_decrypt_sg() subsequently walks that frag_list: use-after-free. Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context is present, call psock->saved_data_ready (sock_def_readable) to wake recv() waiters and return immediately, leaving the receive queue untouched. TLS retains sole ownership of the queue and decrypts the record normally through tls_sw_recvmsg(). Fixes: ef5659280eb1 ("bpf, sockmap: Allow skipping sk_skb parser program") Signed-off-by: Xingwang Xiang Link: https://patch.msgid.link/20260517145630.20521-2-v3rdant.xiang@gmail.com Signed-off-by: Jakub Kicinski --- net/core/skmsg.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/core/skmsg.c b/net/core/skmsg.c index 6187a83bd741..e1850caf1a71 100644 --- a/net/core/skmsg.c +++ b/net/core/skmsg.c @@ -1268,12 +1268,19 @@ out: static void sk_psock_verdict_data_ready(struct sock *sk) { const struct proto_ops *ops = NULL; + struct sk_psock *psock; struct socket *sock; int copied; trace_sk_data_ready(sk); rcu_read_lock(); + psock = sk_psock(sk); + if (psock && tls_sw_has_ctx_rx(sk)) { + psock->saved_data_ready(sk); + rcu_read_unlock(); + return; + } sock = READ_ONCE(sk->sk_socket); if (likely(sock)) ops = READ_ONCE(sock->ops); @@ -1283,8 +1290,6 @@ static void sk_psock_verdict_data_ready(struct sock *sk) copied = ops->read_skb(sk, sk_psock_verdict_recv); if (copied >= 0) { - struct sk_psock *psock; - rcu_read_lock(); psock = sk_psock(sk); if (psock) -- cgit v1.2.3 From 33644bd38aec24fe043e78ce5dca38e7156f8328 Mon Sep 17 00:00:00 2001 From: Xingwang Xiang Date: Sun, 17 May 2026 23:56:27 +0900 Subject: selftests/bpf: add regression test for ktls+sockmap verdict UAF Test the scenario where a socket is inserted into a sockmap with a BPF_SK_SKB_VERDICT program before TLS RX is configured. Previously sk_psock_verdict_data_ready() would call tcp_read_skb() and drain the receive queue without advancing copied_seq, causing tls_decrypt_sg() to walk a dangling frag_list pointer (use-after-free). The test drives the full vulnerable sequence and verifies that after the fix recv() returns the correct decrypted data. Signed-off-by: Xingwang Xiang Link: https://patch.msgid.link/20260517145630.20521-3-v3rdant.xiang@gmail.com Signed-off-by: Jakub Kicinski --- .../selftests/bpf/prog_tests/sockmap_ktls.c | 103 +++++++++++++++++++++ .../selftests/bpf/progs/test_sockmap_ktls.c | 21 +++++ 2 files changed, 124 insertions(+) diff --git a/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c b/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c index b87e7f39e15a..6ed8e149e3d5 100644 --- a/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c +++ b/tools/testing/selftests/bpf/prog_tests/sockmap_ktls.c @@ -417,6 +417,107 @@ static void run_tests(int family, enum bpf_map_type map_type) close(map); } +/* + * Regression test for the KTLS + sockmap (verdict) reverse-order UAF. + * + * Vulnerable sequence: + * 1. Insert receiver socket into sockmap with BPF_SK_SKB_VERDICT program. + * sk->sk_data_ready becomes sk_psock_verdict_data_ready. + * 2. Configure TLS RX: tls_sw_strparser_arm() saves + * sk_psock_verdict_data_ready as rx_ctx->saved_data_ready. + * + * When data arrives, tls_rx_msg_ready() calls saved_data_ready() = + * sk_psock_verdict_data_ready(), which calls tcp_read_skb() and drains + * sk_receive_queue via __skb_unlink() without advancing copied_seq. + * tls_strp_msg_load() then finds the queue empty while tcp_inq() is still + * non-zero, hits WARN_ON_ONCE(!first), and leaves a dangling frag_list + * pointer that tls_decrypt_sg() walks — a use-after-free. + * + * The fix adds a tls_sw_has_ctx_rx() check to sk_psock_verdict_data_ready(), + * mirroring what sk_psock_strp_data_ready() already does: when a TLS RX + * context is present, defer to psock->saved_data_ready (sock_def_readable) + * instead of calling tcp_read_skb(), so TLS retains sole ownership of the + * receive queue. Data is then decrypted and returned correctly by + * tls_sw_recvmsg(). + */ +static void test_sockmap_ktls_verdict_with_tls_rx(int family, int sotype) +{ + struct tls12_crypto_info_aes_gcm_128 crypto_info = {}; + char send_buf[] = "hello ktls sockmap reverse order"; + char recv_buf[sizeof(send_buf)] = {}; + struct test_sockmap_ktls *skel; + int c = -1, p = -1, zero = 0; + int prog_fd, map_fd; + ssize_t n; + int err; + + skel = test_sockmap_ktls__open_and_load(); + if (!ASSERT_TRUE(skel, "open_and_load")) + return; + + err = create_pair(family, sotype, &c, &p); + if (!ASSERT_OK(err, "create_pair")) + goto out; + + prog_fd = bpf_program__fd(skel->progs.prog_skb_verdict_pass); + map_fd = bpf_map__fd(skel->maps.sock_map_verdict); + + err = bpf_prog_attach(prog_fd, map_fd, BPF_SK_SKB_VERDICT, 0); + if (!ASSERT_OK(err, "bpf_prog_attach sk_skb verdict")) + goto out; + + /* Step 1: configure TLS TX on sender (no sockmap involvement) */ + err = setsockopt(c, IPPROTO_TCP, TCP_ULP, "tls", strlen("tls")); + if (!ASSERT_OK(err, "setsockopt(TCP_ULP) client")) + goto out; + + crypto_info.info.version = TLS_1_2_VERSION; + crypto_info.info.cipher_type = TLS_CIPHER_AES_GCM_128; + memset(crypto_info.key, 0x01, sizeof(crypto_info.key)); + memset(crypto_info.salt, 0x02, sizeof(crypto_info.salt)); + + err = setsockopt(c, SOL_TLS, TLS_TX, &crypto_info, sizeof(crypto_info)); + if (!ASSERT_OK(err, "setsockopt(TLS_TX)")) + goto out; + + /* Step 2: insert receiver into sockmap BEFORE TLS RX */ + err = bpf_map_update_elem(map_fd, &zero, &p, BPF_NOEXIST); + if (!ASSERT_OK(err, "bpf_map_update_elem")) + goto out; + + /* Step 3: configure TLS RX AFTER sockmap insertion */ + err = setsockopt(p, IPPROTO_TCP, TCP_ULP, "tls", strlen("tls")); + if (!ASSERT_OK(err, "setsockopt(TCP_ULP) server")) + goto out; + + err = setsockopt(p, SOL_TLS, TLS_RX, &crypto_info, sizeof(crypto_info)); + if (!ASSERT_OK(err, "setsockopt(TLS_RX)")) + goto out; + + /* + * A buggy kernel hits WARN_ON_ONCE in tls_strp_load_anchor_with_queue + * and may UAF in tls_decrypt_sg here. With the fix, + * sk_psock_verdict_data_ready defers to sock_def_readable and TLS + * decrypts the record normally. + */ + n = send(c, send_buf, sizeof(send_buf), 0); + if (!ASSERT_EQ(n, (ssize_t)sizeof(send_buf), "send")) + goto out; + + n = recv_timeout(p, recv_buf, sizeof(recv_buf), 0, 5); + if (!ASSERT_EQ(n, (ssize_t)sizeof(send_buf), "recv")) + goto out; + + ASSERT_OK(memcmp(send_buf, recv_buf, sizeof(send_buf)), "data integrity"); + +out: + if (c != -1) + close(c); + if (p != -1) + close(p); + test_sockmap_ktls__destroy(skel); +} + static void run_ktls_test(int family, int sotype) { if (test__start_subtest("tls simple offload")) @@ -429,6 +530,8 @@ static void run_ktls_test(int family, int sotype) test_sockmap_ktls_tx_no_buf(family, sotype, true); if (test__start_subtest("tls tx with pop")) test_sockmap_ktls_tx_pop(family, sotype); + if (test__start_subtest("tls verdict with tls rx")) + test_sockmap_ktls_verdict_with_tls_rx(family, sotype); } void test_sockmap_ktls(void) diff --git a/tools/testing/selftests/bpf/progs/test_sockmap_ktls.c b/tools/testing/selftests/bpf/progs/test_sockmap_ktls.c index 83df4919c224..facafeaf4620 100644 --- a/tools/testing/selftests/bpf/progs/test_sockmap_ktls.c +++ b/tools/testing/selftests/bpf/progs/test_sockmap_ktls.c @@ -17,6 +17,13 @@ struct { __type(value, int); } sock_map SEC(".maps"); +struct { + __uint(type, BPF_MAP_TYPE_SOCKMAP); + __uint(max_entries, 2); + __type(key, int); + __type(value, int); +} sock_map_verdict SEC(".maps"); + SEC("sk_msg") int prog_sk_policy(struct sk_msg_md *msg) { @@ -38,3 +45,17 @@ int prog_sk_policy_redir(struct sk_msg_md *msg) bpf_msg_apply_bytes(msg, apply_bytes); return bpf_msg_redirect_map(msg, &sock_map, two, 0); } + +/* + * Verdict program for the reverse-order TLS/sockmap regression test. + * Returns SK_PASS so tcp_read_skb() drains the receive queue via + * sk_psock_verdict_recv() without calling tcp_eat_skb(), which is + * the precondition for the KTLS strparser frag_list UAF. + */ +SEC("sk_skb/verdict") +int prog_skb_verdict_pass(struct __sk_buff *skb) +{ + return SK_PASS; +} + +char _license[] SEC("license") = "GPL"; -- cgit v1.2.3 From fd948c3f96b18ff9ba7d3e8eae13d196593e1aaf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Carlos=20L=C3=B3pez?= Date: Tue, 12 May 2026 12:00:42 +0200 Subject: virt: sev-guest: Explicitly leak pages in unknown state MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When set_memory_{encrypted,decrypted}() fail, the user cannot know at which point the function failed, meaning that the pages are left in an unknown state from the point of view of the caller. Since the pages may be left in an unencrypted state, they are not suitable for general use, and cannot be returned safely to the buddy allocator. Avoid the issue by never freeing the pages, and then do the proper accounting by calling snp_leak_pages(). Fixes: 3e385c0d6ce8 ("virt: sev-guest: Move SNP Guest Request data pages handling under snp_cmd_mutex") Signed-off-by: Carlos López Signed-off-by: Borislav Petkov (AMD) Cc: stable@kernel.org --- drivers/virt/coco/sev-guest/sev-guest.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/virt/coco/sev-guest/sev-guest.c b/drivers/virt/coco/sev-guest/sev-guest.c index 910a1de0d5a7..d186ae55cf63 100644 --- a/drivers/virt/coco/sev-guest/sev-guest.c +++ b/drivers/virt/coco/sev-guest/sev-guest.c @@ -176,6 +176,7 @@ static int get_ext_report(struct snp_guest_dev *snp_dev, struct snp_guest_reques struct snp_guest_req req = {}; int ret, npages = 0, resp_len; sockptr_t certs_address; + u64 pfn; if (sockptr_is_null(io->req_data) || sockptr_is_null(io->resp_data)) return -EINVAL; @@ -215,10 +216,11 @@ static int get_ext_report(struct snp_guest_dev *snp_dev, struct snp_guest_reques if (!req.certs_data) return -ENOMEM; + pfn = PHYS_PFN(virt_to_phys(req.certs_data)); ret = set_memory_decrypted((unsigned long)req.certs_data, npages); if (ret) { pr_err("failed to mark page shared, ret=%d\n", ret); - free_pages_exact(req.certs_data, npages << PAGE_SHIFT); + snp_leak_pages(pfn, npages); return -EFAULT; } @@ -272,10 +274,12 @@ e_free: kfree(report_resp); e_free_data: if (npages) { - if (set_memory_encrypted((unsigned long)req.certs_data, npages)) + if (set_memory_encrypted((unsigned long)req.certs_data, npages)) { WARN_ONCE(ret, "failed to restore encryption mask (leak it)\n"); - else + snp_leak_pages(pfn, npages); + } else { free_pages_exact(req.certs_data, npages << PAGE_SHIFT); + } } return ret; } -- cgit v1.2.3 From 4eb82ba543421e9e38cc14e4e82058b78850df50 Mon Sep 17 00:00:00 2001 From: David Carlier Date: Tue, 19 May 2026 21:35:30 +0100 Subject: net: devmem: reject dma-buf bind with non-page-aligned size or SG length net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be PAGE_SIZE multiples without checking: - tx_vec is sized dmabuf->size / PAGE_SIZE, and net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size before indexing tx_vec[virt_addr / PAGE_SIZE]. With size = N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base = N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past. - owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner() covers the full byte len, so a non-page-multiple non-final sg desyncs num_niovs from the gen_pool region for every later sg, on both RX and TX. dma-buf does not require page-aligned sizes, so the bind path has to enforce what its own indexing assumes. Reject both with -EINVAL. The size check is TX-only (only tx_vec is sized off dmabuf->size); the SG-length check covers both directions. Fixes: bd61848900bf ("net: devmem: Implement TX path") Cc: stable@vger.kernel.org Signed-off-by: David Carlier Reviewed-by: Bobby Eshleman Acked-by: Stanislav Fomichev Reviewed-by: Mina Almasry Link: https://patch.msgid.link/20260519203530.66310-1-devnexen@gmail.com Signed-off-by: Jakub Kicinski --- net/core/devmem.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/net/core/devmem.c b/net/core/devmem.c index 468344739db2..4f71de44c0fb 100644 --- a/net/core/devmem.c +++ b/net/core/devmem.c @@ -241,6 +241,11 @@ net_devmem_bind_dmabuf(struct net_device *dev, } if (direction == DMA_TO_DEVICE) { + if (!IS_ALIGNED(dmabuf->size, PAGE_SIZE)) { + err = -EINVAL; + NL_SET_ERR_MSG(extack, "TX dma-buf size must be a multiple of PAGE_SIZE"); + goto err_unmap; + } binding->tx_vec = kvmalloc_objs(struct net_iov *, dmabuf->size / PAGE_SIZE); if (!binding->tx_vec) { @@ -267,6 +272,12 @@ net_devmem_bind_dmabuf(struct net_device *dev, size_t len = sg_dma_len(sg); struct net_iov *niov; + if (!IS_ALIGNED(len, PAGE_SIZE)) { + err = -EINVAL; + NL_SET_ERR_MSG(extack, "dma-buf SG length must be PAGE_SIZE aligned"); + goto err_free_chunks; + } + owner = kzalloc_node(sizeof(*owner), GFP_KERNEL, dev_to_node(&dev->dev)); if (!owner) { -- cgit v1.2.3 From 7eb72c1e3984150c45f77aa4299f7c2598a68e9b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 19 May 2026 20:08:36 +0000 Subject: ipv4: icmp: reject broadcast/multicast routes syzbot was able to trigger ip_rt_bug() in a loop, using an IPv4 packet with a crafted IPOPT_SSRR option: options: ipv4_options { options: array[ipv4_option] { union ipv4_option { ssrr: ipv4_option_route[IPOPT_SSRR] { type: const = 0x89 (1 bytes) length: len = 0x7 (1 bytes) pointer: int8 = 0xa2 (1 bytes) data: array[ipv4_addr] { union ipv4_addr { broadcast: const = 0xffffffff (4 bytes) } } } } Change __icmp_send() to not send ICMP to broadcast/multicast destinations. Fixes: c378a9c019cf ("ipv4: Give backtrace in ip_rt_bug().") Reported-by: syzbot+c13a57c2639c2c0d03a6@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a0cc169.170a0220.1f6c2d.0004.GAE@google.com/T/#u Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Link: https://patch.msgid.link/20260519200836.4141061-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv4/icmp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 7eeff658b467..23e921d313b3 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -961,6 +961,9 @@ void __icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info, if (IS_ERR(rt)) goto out_unlock; + if (rt->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST)) + goto ende; + /* peer icmp_ratelimit */ if (!icmpv4_xrlim_allow(net, rt, &fl4, type, code, apply_ratelimit)) goto ende; -- cgit v1.2.3 From e4bdef4d320b2fe73b8ebfc0cc0507fa9dc4a3b7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 19 May 2026 19:32:48 +0000 Subject: ipv4: use WARN_ON_ONCE() in ip_rt_bug() It turns out ip_rt_bug() can be called more than expected. syzbot will still panic (because of panic_on_warn=1), but non debug kernels will no longer die while repeating stack traces on the console. Fixes: c378a9c019cf ("ipv4: Give backtrace in ip_rt_bug().") Signed-off-by: Eric Dumazet Reviewed-by: David Ahern Reviewed-by: Jiayuan Chen Link: https://patch.msgid.link/20260519193248.4018872-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/ipv4/route.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index bc1296f0ea69..3d62d45d84bd 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1272,7 +1272,7 @@ static int ip_rt_bug(struct net *net, struct sock *sk, struct sk_buff *skb) __func__, &ip_hdr(skb)->saddr, &ip_hdr(skb)->daddr, skb->dev ? skb->dev->name : "?"); kfree_skb(skb); - WARN_ON(1); + WARN_ON_ONCE(1); return 0; } -- cgit v1.2.3 From fa997ddef508b1b37b2fe4d2dad7c4b70958335e Mon Sep 17 00:00:00 2001 From: Ivan Vecera Date: Tue, 19 May 2026 15:22:05 +0200 Subject: dpll: zl3073x: fix memory leak on pin registration failure If zl3073x_dpll_pin_register() fails, the allocated pin is not yet added to zldpll->pins list. The error path calls zl3073x_dpll_pins_unregister() which only iterates pins on the list, so the current pin is leaked. Free the pin before jumping to the error label. Additionally move the pin->dpll_pin = NULL assignment in zl3073x_dpll_pin_register() from err_register to the common err_pin_get path. When dpll_pin_get() fails, pin->dpll_pin holds an ERR_PTR value. Without this fix the subsequent zl3073x_dpll_pin_free() would trigger a spurious WARN because it checks pin->dpll_pin for non-NULL. Fixes: 75a71ecc2412 ("dpll: zl3073x: Register DPLL devices and pins") Reviewed-by: Petr Oros Signed-off-by: Ivan Vecera Link: https://patch.msgid.link/20260519132205.161847-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski --- drivers/dpll/zl3073x/dpll.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/dpll/zl3073x/dpll.c b/drivers/dpll/zl3073x/dpll.c index c95e93ef3ab0..64b4e9e3e8fe 100644 --- a/drivers/dpll/zl3073x/dpll.c +++ b/drivers/dpll/zl3073x/dpll.c @@ -1394,8 +1394,8 @@ zl3073x_dpll_pin_register(struct zl3073x_dpll_pin *pin, u32 index) err_register: dpll_pin_put(pin->dpll_pin, &pin->tracker); - pin->dpll_pin = NULL; err_pin_get: + pin->dpll_pin = NULL; fwnode_handle_put(pin->fwnode); pin->fwnode = NULL; zl3073x_pin_props_put(props); @@ -1563,8 +1563,10 @@ zl3073x_dpll_pins_register(struct zl3073x_dpll *zldpll) } rc = zl3073x_dpll_pin_register(pin, index); - if (rc) + if (rc) { + zl3073x_dpll_pin_free(pin); goto error; + } list_add(&pin->list, &zldpll->pins); } -- cgit v1.2.3 From 99e22ddf4edb63dc8382bc028af928056d3450cf Mon Sep 17 00:00:00 2001 From: Minh Nguyen Date: Tue, 19 May 2026 17:23:10 +0700 Subject: vsock/vmci: fix UAF when peer resets connection during handshake vmci_transport_recv_connecting_server() returned err = 0 for a peer RST in its default switch arm: err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL; That made vmci_transport_recv_listen() skip vsock_remove_pending(), leaving the pending socket on the listener's pending_links with sk_state = TCP_CLOSE while destroy: still dropped the explicit reference taken before schedule_delayed_work(). One second later vsock_pending_work() observed is_pending=true and performed full cleanup: vsock_remove_pending() then the two trailing sock_put(sk) calls -- the first reached refcount 0 and __sk_freed the socket, and the second wrote into the freed object: BUG: KASAN: slab-use-after-free in refcount_warn_saturate Write of size 4 at addr ffff88800b1cac80 by task kworker Workqueue: events vsock_pending_work Treat peer RST like any other unexpected packet type (err = -EINVAL). All destroy: arms now return err < 0, so vmci_transport_recv_listen() removes pending from pending_links synchronously and vsock_pending_work() takes the is_pending=false / !rejected branch, dropping only its own work reference. This also closes the multi-packet race Sashiko reported on v2: pending is removed from the list before any subsequent packet can find it. The pre-existing sk_acceptq_removed() gap on the err < 0 path of vmci_transport_recv_listen() that Sashiko also noted is not introduced or changed by this patch. Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Cc: stable@vger.kernel.org Signed-off-by: Minh Nguyen Acked-by: Bryan Tan Link: https://patch.msgid.link/20260519102310.237181-1-minhnguyen.080505@gmail.com Signed-off-by: Jakub Kicinski --- net/vmw_vsock/vmci_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/vmw_vsock/vmci_transport.c b/net/vmw_vsock/vmci_transport.c index 4296ca1183f1..d2579380f51e 100644 --- a/net/vmw_vsock/vmci_transport.c +++ b/net/vmw_vsock/vmci_transport.c @@ -1164,7 +1164,7 @@ vmci_transport_recv_connecting_server(struct sock *listener, /* Close and cleanup the connection. */ vmci_transport_send_reset(pending, pkt); skerr = EPROTO; - err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL; + err = -EINVAL; goto destroy; } -- cgit v1.2.3 From 1bbf0ced1d9db73ac7893c2187f3459288603e0d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 19 May 2026 08:46:11 +0000 Subject: tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction Blamed commit moved the TIME_WAIT-derived ISN from the skb control block to a per-CPU variable, assuming the value would always be consumed by tcp_conn_request() for the same packet that wrote it. That assumption is violated by multiple drop paths between the producer (__this_cpu_write(tcp_tw_isn, isn) in tcp_v{4,6}_rcv()) and the consumer (tcp_conn_request()): - min_ttl / min_hopcount check - xfrm policy check - tcp_inbound_hash() MD5/AO mismatch - tcp_filter() eBPF/SO_ATTACH_FILTER drop - th->syn && th->fin discard in tcp_rcv_state_process() TCP_LISTEN - psp_sk_rx_policy_check() in tcp_v{4,6}_do_rcv() - tcp_checksum_complete() in tcp_v{4,6}_do_rcv() - tcp_v{4,6}_cookie_check() returning NULL When a packet is dropped on any of these paths, tcp_tw_isn is left set. The next SYN processed on the same CPU then consumes the non zero value in tcp_conn_request(), receiving a potentially predictable ISN. This patch moves back tcp_tw_isn to skb->cb[], getting rid of the per-cpu variable. Note that tcp_v{4,6}_fill_cb() do not set it. Very litle impact on overall code size/complexity: $ scripts/bloat-o-meter -t vmlinux.old vmlinux.new add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7) Function old new delta tcp_v6_rcv 3038 3042 +4 tcp_v4_rcv 3035 3039 +4 tcp_conn_request 2938 2923 -15 Total: Before=24436060, After=24436053, chg -0.00% Fixes: 41eecbd712b7 ("tcp: replace TCP_SKB_CB(skb)->tcp_tw_isn with a per-cpu field") Reported-by: Chris Mason Signed-off-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20260519084611.2485277-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- include/net/tcp.h | 7 ++++--- net/ipv4/tcp.c | 3 --- net/ipv4/tcp_input.c | 15 ++++++--------- net/ipv4/tcp_ipv4.c | 3 ++- net/ipv6/tcp_ipv6.c | 3 ++- 5 files changed, 14 insertions(+), 17 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index ecbadcb3a744..98848db62894 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -65,8 +65,6 @@ static inline void tcp_orphan_count_dec(void) this_cpu_dec(tcp_orphan_count); } -DECLARE_PER_CPU(u32, tcp_tw_isn); - void tcp_time_wait(struct sock *sk, int state, int timeo); #define MAX_TCP_HEADER L1_CACHE_ALIGN(128 + MAX_HEADER) @@ -1102,10 +1100,13 @@ struct tcp_skb_cb { __u32 seq; /* Starting sequence number */ __u32 end_seq; /* SEQ + FIN + SYN + datalen */ union { - /* Note : + /* Notes : + * tcp_tw_isn is used in input path only + * (isn chosen by tcp_timewait_state_process()) * tcp_gso_segs/size are used in write queue only, * cf tcp_skb_pcount()/tcp_skb_mss() */ + u32 tcp_tw_isn; struct { u16 tcp_gso_segs; u16 tcp_gso_size; diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 432fa28e47d4..389a7cc17110 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -299,9 +299,6 @@ enum { DEFINE_PER_CPU(unsigned int, tcp_orphan_count); EXPORT_PER_CPU_SYMBOL_GPL(tcp_orphan_count); -DEFINE_PER_CPU(u32, tcp_tw_isn); -EXPORT_PER_CPU_SYMBOL_GPL(tcp_tw_isn); - long sysctl_tcp_mem[3] __read_mostly; DEFINE_PER_CPU(int, tcp_memory_per_cpu_fw_alloc); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index d5c9e65d9760..de9f68a9c0cf 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -7589,6 +7589,7 @@ int tcp_conn_request(struct request_sock_ops *rsk_ops, struct sock *sk, struct sk_buff *skb) { struct tcp_fastopen_cookie foc = { .len = -1 }; + u32 isn = TCP_SKB_CB(skb)->tcp_tw_isn; struct tcp_options_received tmp_opt; const struct tcp_sock *tp = tcp_sk(sk); struct net *net = sock_net(sk); @@ -7599,20 +7600,16 @@ int tcp_conn_request(struct request_sock_ops *rsk_ops, struct dst_entry *dst; struct flowi fl; u8 syncookies; - u32 isn; #ifdef CONFIG_TCP_AO const struct tcp_ao_hdr *aoh; #endif - isn = __this_cpu_read(tcp_tw_isn); - if (isn) { - /* TW buckets are converted to open requests without - * limitations, they conserve resources and peer is - * evidently real one. - */ - __this_cpu_write(tcp_tw_isn, 0); - } else { + /* If isn is non-zero, this SYN originally matched a TIME_WAIT socket. + * TW sockets are converted to open requests without limitations, + * we skip the queue limits and syncookie checks in the block below. + */ + if (!isn) { syncookies = READ_ONCE(net->ipv4.sysctl_tcp_syncookies); if (syncookies == 2 || inet_csk_reqsk_queue_is_full(sk)) { diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index c0526cc03980..fdc81150ff6c 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -2198,6 +2198,7 @@ lookup: } } + isn = 0; process: if (static_branch_unlikely(&ip4_min_ttl)) { /* min_ttl can be changed concurrently from do_ip_setsockopt() */ @@ -2227,6 +2228,7 @@ process: th = (const struct tcphdr *)skb->data; iph = ip_hdr(skb); tcp_v4_fill_cb(skb, iph, th); + TCP_SKB_CB(skb)->tcp_tw_isn = isn; skb->dev = NULL; @@ -2313,7 +2315,6 @@ do_time_wait: sk = sk2; tcp_v4_restore_cb(skb); refcounted = false; - __this_cpu_write(tcp_tw_isn, isn); goto process; } diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index d13d49bfef19..36d75fb50a70 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1839,6 +1839,7 @@ lookup: } } + isn = 0; process: if (static_branch_unlikely(&ip6_min_hopcount)) { /* min_hopcount can be changed concurrently from do_ipv6_setsockopt() */ @@ -1868,6 +1869,7 @@ process: th = (const struct tcphdr *)skb->data; hdr = ipv6_hdr(skb); tcp_v6_fill_cb(skb, hdr, th); + TCP_SKB_CB(skb)->tcp_tw_isn = isn; skb->dev = NULL; @@ -1956,7 +1958,6 @@ do_time_wait: sk = sk2; tcp_v6_restore_cb(skb); refcounted = false; - __this_cpu_write(tcp_tw_isn, isn); goto process; } -- cgit v1.2.3 From be460cedb67ab803c1bebceac19b1d44acb85d30 Mon Sep 17 00:00:00 2001 From: Stepan Ionichev Date: Wed, 20 May 2026 16:05:04 +0500 Subject: gpio: pca953x: propagate regulator_enable() error from resume pca953x_resume() returns 0 when regulator_enable() fails, dropping the real error code and masking the failure as a successful resume. The caller then proceeds as if the chip is powered, while the regulator is in fact disabled. Return ret so PM core sees the actual failure. Signed-off-by: Stepan Ionichev Link: https://patch.msgid.link/20260520110504.13969-1-sozdayvek@gmail.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-pca953x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 52e96cc5f67b..b9c905a0ffa9 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -1411,7 +1411,7 @@ static int pca953x_resume(struct device *dev) ret = regulator_enable(chip->regulator); if (ret) { dev_err(dev, "Failed to enable regulator: %d\n", ret); - return 0; + return ret; } } -- cgit v1.2.3 From 48f6a5356a33dd78e7144ae1faef95ffc990aae0 Mon Sep 17 00:00:00 2001 From: Hyunwoo Kim Date: Sat, 16 May 2026 07:28:53 +0900 Subject: net: skbuff: propagate shared-frag marker through frag-transfer helpers Two frag-transfer helpers (__pskb_copy_fclone() and skb_shift()) fail to propagate the SKBFL_SHARED_FRAG bit in skb_shinfo()->flags when moving frags from source to destination. __pskb_copy_fclone() defers the rest of the shinfo metadata to skb_copy_header() after copying frag descriptors, but that helper only carries over gso_{size,segs, type} and never touches skb_shinfo()->flags; skb_shift() moves frag descriptors directly and leaves flags untouched. As a result, the destination skb keeps a reference to the same externally-owned or page-cache-backed pages while reporting skb_has_shared_frag() as false. The mismatch is harmful in any in-place writer that uses skb_has_shared_frag() to decide whether shared pages must be detoured through skb_cow_data(). ESP input is one such writer (esp4.c, esp6.c), and a single nft 'dup to ' rule -- or any other nf_dup_ipv4() / xt_TEE caller -- is enough to land a pskb_copy()'d skb in esp_input() with the marker stripped, letting an unprivileged user write into the page cache of a root-owned read-only file via authencesn-ESN stray writes. Set SKBFL_SHARED_FRAG on the destination whenever frag descriptors were actually moved from the source. skb_copy() and skb_copy_expand() share skb_copy_header() too but linearize all paged data into freshly allocated head storage and emerge with nr_frags == 0, so skb_has_shared_frag() returns false on its own; they need no change. The same omission exists in skb_gro_receive() and skb_gro_receive_list(). The former moves the incoming skb's frag descriptors into the accumulator's last sub-skb via two paths (a direct frag-move loop and the head_frag + memcpy path); the latter chains the incoming skb whole onto p's frag_list. Downstream skb_segment() reads only skb_shinfo(p)->flags, and skb_segment_list() reuses each sub-skb's shinfo as the nskb -- both p and lp must carry the marker. The same omission also exists in tcp_clone_payload(), which builds an MTU probe skb by moving frag descriptors from skbs on sk_write_queue into a freshly allocated nskb. The helper falls into the same family and warrants the same fix for consistency; no TCP TX-side in-place writer is currently known to reach a user page through this gap, but a future consumer depending on the marker would regress silently. The same omission exists in skb_segment(): the per-iteration flag merge takes only head_skb's flag, and the inner switch that rebinds frag_skb to list_skb on head_skb-frags exhaustion does not fold the new frag_skb's flag into nskb. Fold frag_skb's flag at both sites so segments drawing frags from frag_list members carry the marker. Fixes: cef401de7be8 ("net: fix possible wrong checksum generation") Fixes: f4c50a4034e6 ("xfrm: esp: avoid in-place decrypt on shared skb frags") Suggested-by: Sabrina Dubroca Suggested-by: Sultan Alsawaf Suggested-by: Ben Hutchings Suggested-by: Lin Ma Suggested-by: Jingguo Tan Suggested-by: Aaron Esau Cc: stable@vger.kernel.org Signed-off-by: Hyunwoo Kim Tested-by: Rajat Gupta Link: https://patch.msgid.link/ageeJfJHwgzmKXbh@v4bel Signed-off-by: Paolo Abeni --- net/core/gro.c | 4 ++++ net/core/skbuff.c | 9 ++++++++- net/ipv4/tcp_output.c | 1 + 3 files changed, 13 insertions(+), 1 deletion(-) diff --git a/net/core/gro.c b/net/core/gro.c index 31d21de5b15a..9f8960789b2c 100644 --- a/net/core/gro.c +++ b/net/core/gro.c @@ -213,10 +213,12 @@ done: p->data_len += len; p->truesize += delta_truesize; p->len += len; + skb_shinfo(p)->flags |= skbinfo->flags & SKBFL_SHARED_FRAG; if (lp != p) { lp->data_len += len; lp->truesize += delta_truesize; lp->len += len; + skb_shinfo(lp)->flags |= skbinfo->flags & SKBFL_SHARED_FRAG; } NAPI_GRO_CB(skb)->same_flow = 1; return 0; @@ -244,6 +246,8 @@ int skb_gro_receive_list(struct sk_buff *p, struct sk_buff *skb) p->truesize += skb->truesize; p->len += skb->len; + skb_shinfo(p)->flags |= skb_shinfo(skb)->flags & SKBFL_SHARED_FRAG; + NAPI_GRO_CB(skb)->same_flow = 1; return 0; diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 9c4e8d331d6d..44ac121cfccb 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -2248,6 +2248,7 @@ struct sk_buff *__pskb_copy_fclone(struct sk_buff *skb, int headroom, skb_frag_ref(skb, i); } skb_shinfo(n)->nr_frags = i; + skb_shinfo(n)->flags |= skb_shinfo(skb)->flags & SKBFL_SHARED_FRAG; } if (skb_has_frag_list(skb)) { @@ -4349,6 +4350,8 @@ onlymerged: tgt->ip_summed = CHECKSUM_PARTIAL; skb->ip_summed = CHECKSUM_PARTIAL; + skb_shinfo(tgt)->flags |= skb_shinfo(skb)->flags & SKBFL_SHARED_FRAG; + skb_len_add(skb, -shiftlen); skb_len_add(tgt, shiftlen); @@ -4959,7 +4962,8 @@ normal: skb_copy_from_linear_data_offset(head_skb, offset, skb_put(nskb, hsize), hsize); - skb_shinfo(nskb)->flags |= skb_shinfo(head_skb)->flags & + skb_shinfo(nskb)->flags |= (skb_shinfo(head_skb)->flags | + skb_shinfo(frag_skb)->flags) & SKBFL_SHARED_FRAG; if (skb_zerocopy_clone(nskb, frag_skb, GFP_ATOMIC)) @@ -4976,6 +4980,9 @@ normal: nfrags = skb_shinfo(list_skb)->nr_frags; frag = skb_shinfo(list_skb)->frags; frag_skb = list_skb; + + skb_shinfo(nskb)->flags |= skb_shinfo(frag_skb)->flags & SKBFL_SHARED_FRAG; + if (!skb_headlen(list_skb)) { BUG_ON(!nfrags); } else { diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index f9d8755705f7..6e4bb411dc04 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2626,6 +2626,7 @@ static int tcp_clone_payload(struct sock *sk, struct sk_buff *to, todo = min_t(int, skb_frag_size(fragfrom), probe_size - len); len += todo; + skb_shinfo(to)->flags |= skb_shinfo(skb)->flags & SKBFL_SHARED_FRAG; if (lastfrag && skb_frag_page(fragfrom) == skb_frag_page(lastfrag) && skb_frag_off(fragfrom) == skb_frag_off(lastfrag) + -- cgit v1.2.3 From 96031b31a4b3b6ec836b9fe7be8f6e6ebcfe8d67 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 21 May 2026 00:04:22 +0200 Subject: irqchip/exynos-combiner: Switch to raw_spinlock The exynos-combiner driver uses a regular spinlock to protect access to the combiner interrupt status register in combiner_handle_cascade_irq(), which is invoked in hard interrupt context as a chained interrupt handler. When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a sleeping lock (mutex-based), which must not be used in atomic context such as hard interrupt handlers. Switch the irq_controller_lock to raw_spinlock, which remains a true non-sleeping spinlock even under PREEMPT_RT. Fixes: a900e5d99718 ("ARM: exynos: move exynos4210-combiner to drivers/irqchip") Signed-off-by: Marek Szyprowski Signed-off-by: Thomas Gleixner --- drivers/irqchip/exynos-combiner.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c index 11d105457798..03cafcc5c835 100644 --- a/drivers/irqchip/exynos-combiner.c +++ b/drivers/irqchip/exynos-combiner.c @@ -24,7 +24,7 @@ #define IRQ_IN_COMBINER 8 -static DEFINE_SPINLOCK(irq_controller_lock); +static DEFINE_RAW_SPINLOCK(irq_controller_lock); struct combiner_chip_data { unsigned int hwirq_offset; @@ -72,9 +72,9 @@ static void combiner_handle_cascade_irq(struct irq_desc *desc) chained_irq_enter(chip, desc); - spin_lock(&irq_controller_lock); + raw_spin_lock(&irq_controller_lock); status = readl_relaxed(chip_data->base + COMBINER_INT_STATUS); - spin_unlock(&irq_controller_lock); + raw_spin_unlock(&irq_controller_lock); status &= chip_data->irq_mask; if (status == 0) -- cgit v1.2.3 From c36069c6f46c52458bb86fa8eb4803f1e0b70fb0 Mon Sep 17 00:00:00 2001 From: Zhi Li Date: Mon, 18 May 2026 10:20:23 +0800 Subject: dt-bindings: ethernet: eswin: add optional TXD and RXD delay register offsets Document two optional cells in eswin,hsp-sp-csr for the TXD and RXD delay control register offsets. These registers are used by the driver to clear any residual delay configuration left by the bootloader, ensuring that MAC-side RGMII delay settings are applied solely according to the kernel configuration. Add a reference to the EIC7700X SoC Technical Reference Manual for background information about the HSP CSR block. Fixes: 888bd0eca93c ("dt-bindings: ethernet: eswin: Document for EIC7700 SoC") Signed-off-by: Zhi Li Acked-by: Conor Dooley Link: https://patch.msgid.link/20260518022023.427-1-lizhi2@eswincomputing.com Signed-off-by: Paolo Abeni --- .../devicetree/bindings/net/eswin,eic7700-eth.yaml | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml index 91e8cd1db67b..b66ae6300faf 100644 --- a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml +++ b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml @@ -73,6 +73,15 @@ properties: HSP CSR is to control and get status of different high-speed peripherals (such as Ethernet, USB, SATA, etc.) via register, which can tune board-level's parameters of PHY, etc. + + Additional background information about the High-Speed Subsystem + and the HSP CSR block is available in Chapter 10 ("High-Speed Interface") + of the EIC7700X SoC Technical Reference Manual, Part 4 + (EIC7700X_SoC_Technical_Reference_Manual_Part4.pdf). The manual is + publicly available at + https://github.com/eswincomputing/EIC7700X-SoC-Technical-Reference-Manual/releases + + This reference is provided for background information only. $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: @@ -82,6 +91,8 @@ properties: - description: Offset of AXI clock controller Low-Power request register - description: Offset of register controlling TX/RX clock delay + - description: Optional offset of register controlling TXD delay + - description: Optional offset of register controlling RXD delay required: - compatible @@ -116,7 +127,7 @@ examples: reset-names = "stmmaceth"; rx-internal-delay-ps = <200>; tx-internal-delay-ps = <200>; - eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118>; + eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118 0x114 0x11c>; snps,axi-config = <&stmmac_axi_setup>; snps,aal; snps,fixed-burst; -- cgit v1.2.3 From 23386defe949c0db4f746bed7098fc5e06746083 Mon Sep 17 00:00:00 2001 From: Zhi Li Date: Mon, 18 May 2026 10:20:55 +0800 Subject: net: stmmac: eswin: fix HSP CSR init ordering after clock enable Fix the initialization ordering of the HSP CSR configuration in the EIC7700 DWMAC glue driver. The HSP CSR registers control MAC-side RGMII delay behavior and must only be accessed after the corresponding clocks are enabled. The previous implementation could trigger register access before clock enablement, leading to undefined behavior depending on boot state. Move the HSP CSR configuration into the post-clock-enable initialization path to ensure all register accesses occur under valid clock domains. This change ensures deterministic initialization and prevents clock-dependent register access failures during probe or resume. Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver") Signed-off-by: Zhi Li Link: https://patch.msgid.link/20260518022055.444-1-lizhi2@eswincomputing.com Signed-off-by: Paolo Abeni --- .../net/ethernet/stmicro/stmmac/dwmac-eic7700.c | 73 ++++++++++++---------- 1 file changed, 41 insertions(+), 32 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c index bcb8e000e720..63001c4acdb7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c @@ -42,6 +42,11 @@ static const char * const eic7700_clk_names[] = { struct eic7700_qos_priv { struct plat_stmmacenet_data *plat_dat; + struct regmap *eic7700_hsp_regmap; + u32 eth_axi_lp_ctrl_offset; + u32 eth_phy_ctrl_offset; + u32 eth_clk_offset; + u32 eth_clk_dly_param; }; static int eic7700_clks_config(void *priv, bool enabled) @@ -61,8 +66,28 @@ static int eic7700_clks_config(void *priv, bool enabled) static int eic7700_dwmac_init(struct device *dev, void *priv) { struct eic7700_qos_priv *dwc = priv; + int ret; + + ret = eic7700_clks_config(dwc, true); + if (ret) + return ret; + + ret = regmap_set_bits(dwc->eic7700_hsp_regmap, + dwc->eth_phy_ctrl_offset, + EIC7700_ETH_TX_CLK_SEL | + EIC7700_ETH_PHY_INTF_SELI); + if (ret) { + eic7700_clks_config(dwc, false); + return ret; + } + + regmap_write(dwc->eic7700_hsp_regmap, dwc->eth_axi_lp_ctrl_offset, + EIC7700_ETH_CSYSREQ_VAL); - return eic7700_clks_config(dwc, true); + regmap_write(dwc->eic7700_hsp_regmap, dwc->eth_clk_offset, + dwc->eth_clk_dly_param); + + return 0; } static void eic7700_dwmac_exit(struct device *dev, void *priv) @@ -93,12 +118,6 @@ static int eic7700_dwmac_probe(struct platform_device *pdev) struct plat_stmmacenet_data *plat_dat; struct stmmac_resources stmmac_res; struct eic7700_qos_priv *dwc_priv; - struct regmap *eic7700_hsp_regmap; - u32 eth_axi_lp_ctrl_offset; - u32 eth_phy_ctrl_offset; - u32 eth_phy_ctrl_regset; - u32 eth_rxd_dly_offset; - u32 eth_dly_param = 0; u32 delay_ps; int i, ret; @@ -121,8 +140,9 @@ static int eic7700_dwmac_probe(struct platform_device *pdev) "rx-internal-delay-ps", &delay_ps)) { u32 val = min(delay_ps / 100, EIC7700_MAX_DELAY_UNIT); - eth_dly_param &= ~EIC7700_ETH_RX_ADJ_DELAY; - eth_dly_param |= FIELD_PREP(EIC7700_ETH_RX_ADJ_DELAY, val); + dwc_priv->eth_clk_dly_param &= ~EIC7700_ETH_RX_ADJ_DELAY; + dwc_priv->eth_clk_dly_param |= + FIELD_PREP(EIC7700_ETH_RX_ADJ_DELAY, val); } else { return dev_err_probe(&pdev->dev, -EINVAL, "missing required property rx-internal-delay-ps\n"); @@ -133,53 +153,42 @@ static int eic7700_dwmac_probe(struct platform_device *pdev) "tx-internal-delay-ps", &delay_ps)) { u32 val = min(delay_ps / 100, EIC7700_MAX_DELAY_UNIT); - eth_dly_param &= ~EIC7700_ETH_TX_ADJ_DELAY; - eth_dly_param |= FIELD_PREP(EIC7700_ETH_TX_ADJ_DELAY, val); + dwc_priv->eth_clk_dly_param &= ~EIC7700_ETH_TX_ADJ_DELAY; + dwc_priv->eth_clk_dly_param |= + FIELD_PREP(EIC7700_ETH_TX_ADJ_DELAY, val); } else { return dev_err_probe(&pdev->dev, -EINVAL, "missing required property tx-internal-delay-ps\n"); } - eic7700_hsp_regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, - "eswin,hsp-sp-csr"); - if (IS_ERR(eic7700_hsp_regmap)) + dwc_priv->eic7700_hsp_regmap = + syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "eswin,hsp-sp-csr"); + if (IS_ERR(dwc_priv->eic7700_hsp_regmap)) return dev_err_probe(&pdev->dev, - PTR_ERR(eic7700_hsp_regmap), + PTR_ERR(dwc_priv->eic7700_hsp_regmap), "Failed to get hsp-sp-csr regmap\n"); ret = of_property_read_u32_index(pdev->dev.of_node, "eswin,hsp-sp-csr", - 1, ð_phy_ctrl_offset); + 1, &dwc_priv->eth_phy_ctrl_offset); if (ret) return dev_err_probe(&pdev->dev, ret, "can't get eth_phy_ctrl_offset\n"); - regmap_read(eic7700_hsp_regmap, eth_phy_ctrl_offset, - ð_phy_ctrl_regset); - eth_phy_ctrl_regset |= - (EIC7700_ETH_TX_CLK_SEL | EIC7700_ETH_PHY_INTF_SELI); - regmap_write(eic7700_hsp_regmap, eth_phy_ctrl_offset, - eth_phy_ctrl_regset); - ret = of_property_read_u32_index(pdev->dev.of_node, "eswin,hsp-sp-csr", - 2, ð_axi_lp_ctrl_offset); + 2, &dwc_priv->eth_axi_lp_ctrl_offset); if (ret) return dev_err_probe(&pdev->dev, ret, "can't get eth_axi_lp_ctrl_offset\n"); - regmap_write(eic7700_hsp_regmap, eth_axi_lp_ctrl_offset, - EIC7700_ETH_CSYSREQ_VAL); - ret = of_property_read_u32_index(pdev->dev.of_node, "eswin,hsp-sp-csr", - 3, ð_rxd_dly_offset); + 3, &dwc_priv->eth_clk_offset); if (ret) return dev_err_probe(&pdev->dev, ret, - "can't get eth_rxd_dly_offset\n"); - - regmap_write(eic7700_hsp_regmap, eth_rxd_dly_offset, - eth_dly_param); + "can't get eth_clk_offset\n"); plat_dat->num_clks = ARRAY_SIZE(eic7700_clk_names); plat_dat->clks = devm_kcalloc(&pdev->dev, -- cgit v1.2.3 From 6872fb088edc1a3c36792b301f8e4a1c35dd7c35 Mon Sep 17 00:00:00 2001 From: Zhi Li Date: Mon, 18 May 2026 10:21:37 +0800 Subject: net: stmmac: eswin: clear TXD and RXD delay registers during initialization Clear the TXD and RXD delay control registers during EIC7700 DWMAC initialization. These registers may retain values programmed by the bootloader. If left unchanged, residual delays can alter the effective RGMII timing seen by the MAC and override the configuration described by the device tree. This may violate the expected RGMII timing model and can cause link instability or prevent the Ethernet controller from operating correctly. Explicitly clearing these registers ensures that the MAC delay settings are determined solely by the kernel configuration. The corresponding register offsets are optional, and the registers are only cleared when the offsets are provided in the device tree. Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver") Signed-off-by: Zhi Li Link: https://patch.msgid.link/20260518022137.464-1-lizhi2@eswincomputing.com Signed-off-by: Paolo Abeni --- .../net/ethernet/stmicro/stmmac/dwmac-eic7700.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c index 63001c4acdb7..541b279f08a1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c @@ -46,7 +46,11 @@ struct eic7700_qos_priv { u32 eth_axi_lp_ctrl_offset; u32 eth_phy_ctrl_offset; u32 eth_clk_offset; + u32 eth_txd_offset; + u32 eth_rxd_offset; u32 eth_clk_dly_param; + bool has_txd_offset; + bool has_rxd_offset; }; static int eic7700_clks_config(void *priv, bool enabled) @@ -84,6 +88,12 @@ static int eic7700_dwmac_init(struct device *dev, void *priv) regmap_write(dwc->eic7700_hsp_regmap, dwc->eth_axi_lp_ctrl_offset, EIC7700_ETH_CSYSREQ_VAL); + if (dwc->has_txd_offset) + regmap_write(dwc->eic7700_hsp_regmap, dwc->eth_txd_offset, 0); + + if (dwc->has_rxd_offset) + regmap_write(dwc->eic7700_hsp_regmap, dwc->eth_rxd_offset, 0); + regmap_write(dwc->eic7700_hsp_regmap, dwc->eth_clk_offset, dwc->eth_clk_dly_param); @@ -190,6 +200,18 @@ static int eic7700_dwmac_probe(struct platform_device *pdev) return dev_err_probe(&pdev->dev, ret, "can't get eth_clk_offset\n"); + ret = of_property_read_u32_index(pdev->dev.of_node, + "eswin,hsp-sp-csr", + 4, &dwc_priv->eth_txd_offset); + if (!ret) + dwc_priv->has_txd_offset = true; + + ret = of_property_read_u32_index(pdev->dev.of_node, + "eswin,hsp-sp-csr", + 5, &dwc_priv->eth_rxd_offset); + if (!ret) + dwc_priv->has_rxd_offset = true; + plat_dat->num_clks = ARRAY_SIZE(eic7700_clk_names); plat_dat->clks = devm_kcalloc(&pdev->dev, plat_dat->num_clks, -- cgit v1.2.3 From 6ffcef9bc1fc2ad8110777decd6d026e3cb468ce Mon Sep 17 00:00:00 2001 From: Zhi Li Date: Mon, 18 May 2026 10:21:52 +0800 Subject: net: stmmac: eswin: correct RGMII delay granularity to 20 ps The EIC7700 MAC implements programmable RGMII delay adjustment with a granularity of 20 ps per hardware step. The driver previously converted rx-internal-delay-ps and tx-internal-delay-ps values using a 100 ps step size, resulting in incorrect delay programming. Update the conversion to use the correct 20 ps granularity so the programmed delay matches the values described in the device tree. Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver") Signed-off-by: Zhi Li Link: https://patch.msgid.link/20260518022156.484-1-lizhi2@eswincomputing.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c index 541b279f08a1..ef60cab24533 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c @@ -28,8 +28,8 @@ /* * TX/RX Clock Delay Bit Masks: - * - TX Delay: bits [14:8] — TX_CLK delay (unit: 0.1ns per bit) - * - RX Delay: bits [30:24] — RX_CLK delay (unit: 0.1ns per bit) + * - TX Delay: bits [14:8] — TX_CLK delay (unit: 0.02ns per bit) + * - RX Delay: bits [30:24] — RX_CLK delay (unit: 0.02ns per bit) */ #define EIC7700_ETH_TX_ADJ_DELAY GENMASK(14, 8) #define EIC7700_ETH_RX_ADJ_DELAY GENMASK(30, 24) @@ -148,7 +148,7 @@ static int eic7700_dwmac_probe(struct platform_device *pdev) /* Read rx-internal-delay-ps and update rx_clk delay */ if (!of_property_read_u32(pdev->dev.of_node, "rx-internal-delay-ps", &delay_ps)) { - u32 val = min(delay_ps / 100, EIC7700_MAX_DELAY_UNIT); + u32 val = min(delay_ps / 20, EIC7700_MAX_DELAY_UNIT); dwc_priv->eth_clk_dly_param &= ~EIC7700_ETH_RX_ADJ_DELAY; dwc_priv->eth_clk_dly_param |= @@ -161,7 +161,7 @@ static int eic7700_dwmac_probe(struct platform_device *pdev) /* Read tx-internal-delay-ps and update tx_clk delay */ if (!of_property_read_u32(pdev->dev.of_node, "tx-internal-delay-ps", &delay_ps)) { - u32 val = min(delay_ps / 100, EIC7700_MAX_DELAY_UNIT); + u32 val = min(delay_ps / 20, EIC7700_MAX_DELAY_UNIT); dwc_priv->eth_clk_dly_param &= ~EIC7700_ETH_TX_ADJ_DELAY; dwc_priv->eth_clk_dly_param |= -- cgit v1.2.3 From c2e152f7ce3208b9333d212d41a87637ec1dd170 Mon Sep 17 00:00:00 2001 From: Zhi Li Date: Mon, 18 May 2026 10:22:13 +0800 Subject: net: stmmac: eswin: validate RGMII delay values Validate rx-internal-delay-ps and tx-internal-delay-ps against the hardware capabilities of the EIC7700 MAC. The programmable RGMII delay supports 20 ps steps and a maximum value of 2540 ps. The driver previously accepted arbitrary values and silently truncated unsupported settings when converting them to hardware units. As a result, invalid device tree values could lead to unexpected delay programming and incorrect RGMII timing. Reject delay values that are not multiples of 20 ps or exceed the supported hardware range. Fixes: ea77dbbdbc4e ("net: stmmac: add Eswin EIC7700 glue driver") Signed-off-by: Zhi Li Link: https://patch.msgid.link/20260518022214.507-1-lizhi2@eswincomputing.com Signed-off-by: Paolo Abeni --- .../net/ethernet/stmicro/stmmac/dwmac-eic7700.c | 29 +++++++++++++++++++--- 1 file changed, 25 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c index ef60cab24533..4ac979d874d6 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-eic7700.c @@ -34,7 +34,10 @@ #define EIC7700_ETH_TX_ADJ_DELAY GENMASK(14, 8) #define EIC7700_ETH_RX_ADJ_DELAY GENMASK(30, 24) -#define EIC7700_MAX_DELAY_UNIT 0x7F +#define EIC7700_MAX_DELAY_STEPS 0x7F +#define EIC7700_DELAY_STEP_PS 20 +#define EIC7700_MAX_DELAY_PS \ + (EIC7700_MAX_DELAY_STEPS * EIC7700_DELAY_STEP_PS) static const char * const eic7700_clk_names[] = { "tx", "axi", "cfg", @@ -128,7 +131,7 @@ static int eic7700_dwmac_probe(struct platform_device *pdev) struct plat_stmmacenet_data *plat_dat; struct stmmac_resources stmmac_res; struct eic7700_qos_priv *dwc_priv; - u32 delay_ps; + u32 delay_ps, val; int i, ret; ret = stmmac_get_platform_resources(pdev, &stmmac_res); @@ -148,7 +151,16 @@ static int eic7700_dwmac_probe(struct platform_device *pdev) /* Read rx-internal-delay-ps and update rx_clk delay */ if (!of_property_read_u32(pdev->dev.of_node, "rx-internal-delay-ps", &delay_ps)) { - u32 val = min(delay_ps / 20, EIC7700_MAX_DELAY_UNIT); + if (delay_ps % EIC7700_DELAY_STEP_PS) + return dev_err_probe(&pdev->dev, -EINVAL, + "rx delay must be multiple of %dps\n", + EIC7700_DELAY_STEP_PS); + + if (delay_ps > EIC7700_MAX_DELAY_PS) + return dev_err_probe(&pdev->dev, -EINVAL, + "rx delay out of range\n"); + + val = delay_ps / EIC7700_DELAY_STEP_PS; dwc_priv->eth_clk_dly_param &= ~EIC7700_ETH_RX_ADJ_DELAY; dwc_priv->eth_clk_dly_param |= @@ -161,7 +173,16 @@ static int eic7700_dwmac_probe(struct platform_device *pdev) /* Read tx-internal-delay-ps and update tx_clk delay */ if (!of_property_read_u32(pdev->dev.of_node, "tx-internal-delay-ps", &delay_ps)) { - u32 val = min(delay_ps / 20, EIC7700_MAX_DELAY_UNIT); + if (delay_ps % EIC7700_DELAY_STEP_PS) + return dev_err_probe(&pdev->dev, -EINVAL, + "tx delay must be multiple of %dps\n", + EIC7700_DELAY_STEP_PS); + + if (delay_ps > EIC7700_MAX_DELAY_PS) + return dev_err_probe(&pdev->dev, -EINVAL, + "tx delay out of range\n"); + + val = delay_ps / EIC7700_DELAY_STEP_PS; dwc_priv->eth_clk_dly_param &= ~EIC7700_ETH_TX_ADJ_DELAY; dwc_priv->eth_clk_dly_param |= -- cgit v1.2.3 From 3e6ccd790ed69bedd3d9626d01dd35cf9821c121 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Thu, 21 May 2026 10:42:16 +0200 Subject: gpio: cdev: check if uAPI v2 config attributes are correctly zeroed We check the padding of other uAPI v2 structures but not that of line config attributes. For used attributes: check if their padding is zeroed, for unused: check if the entire structure is zeroed. Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL") Reviewed-by: Kent Gibson Link: https://patch.msgid.link/20260521-gpio-cdev-attr-padding-check-v3-1-ec3bcbe2e358@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpiolib-cdev.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpio/gpiolib-cdev.c b/drivers/gpio/gpiolib-cdev.c index f36b7c06996d..82f27db0b230 100644 --- a/drivers/gpio/gpiolib-cdev.c +++ b/drivers/gpio/gpiolib-cdev.c @@ -1184,6 +1184,7 @@ static int gpio_v2_line_flags_validate(u64 flags) static int gpio_v2_line_config_validate(struct gpio_v2_line_config *lc, unsigned int num_lines) { + size_t unused_attrs; unsigned int i; u64 flags; int ret; @@ -1191,9 +1192,21 @@ static int gpio_v2_line_config_validate(struct gpio_v2_line_config *lc, if (lc->num_attrs > GPIO_V2_LINE_NUM_ATTRS_MAX) return -EINVAL; + unused_attrs = GPIO_V2_LINE_NUM_ATTRS_MAX - lc->num_attrs; + if (!mem_is_zero(lc->padding, sizeof(lc->padding))) return -EINVAL; + for (i = 0; i < lc->num_attrs; i++) { + if (lc->attrs[i].attr.padding != 0) + return -EINVAL; + } + + if (unused_attrs) { + if (!mem_is_zero(&lc->attrs[lc->num_attrs], unused_attrs * sizeof(*lc->attrs))) + return -EINVAL; + } + for (i = 0; i < num_lines; i++) { flags = gpio_v2_line_config_flags(lc, i); ret = gpio_v2_line_flags_validate(flags); -- cgit v1.2.3 From 30c073cab97afb31901f94de9605177b6b84367e Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 20 May 2026 10:49:11 +0200 Subject: gpio: aggregator: fix a potential use-after-free On error we free aggr->lookups->dev_id before removing the entry from the lookup table. If a concurrent thread calls gpiod_find() before we remove the entry, it could iterate over the list and call gpiod_match_lookup_table() which unconditionally dereferences dev_id when calling strcmp(). Reverse the order of cleanup. Fixes: 86f162e73d2d ("gpio: aggregator: introduce basic configfs interface") Reviewed-by: Geert Uytterhoeven Link: https://patch.msgid.link/20260520084911.27938-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-aggregator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c index 5915209e1e21..b53230065f50 100644 --- a/drivers/gpio/gpio-aggregator.c +++ b/drivers/gpio/gpio-aggregator.c @@ -979,8 +979,8 @@ static int gpio_aggregator_activate(struct gpio_aggregator *aggr) err_unregister_pdev: platform_device_unregister(pdev); err_remove_lookup_table: - kfree(aggr->lookups->dev_id); gpiod_remove_lookup_table(aggr->lookups); + kfree(aggr->lookups->dev_id); err_remove_swnode: fwnode_remove_software_node(swnode); err_remove_lookups: -- cgit v1.2.3 From 61fef83f239ecace1cce716135762a2d9b7b1fc6 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 20 May 2026 14:16:31 +0200 Subject: gpio: aggregator: remove the software node when deactivating the aggregator The dynamic software node we create for the aggregator platform device when using configfs is leaked when the device is deactivated. Destroy it as the last step in the tear-down path. Fixes: 86f162e73d2d ("gpio: aggregator: introduce basic configfs interface") Reported-by: Geert Uytterhoeven Closes: https://lore.kernel.org/all/CAMuHMdVZ=XUvJTGdDAjnkxgtw7Uvnn61iOy3XN_5XNZM2anctw@mail.gmail.com/ Link: https://patch.msgid.link/20260520121631.33976-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-aggregator.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c index b53230065f50..a9ad809708fb 100644 --- a/drivers/gpio/gpio-aggregator.c +++ b/drivers/gpio/gpio-aggregator.c @@ -991,11 +991,15 @@ err_remove_lookups: static void gpio_aggregator_deactivate(struct gpio_aggregator *aggr) { + struct fwnode_handle *swnode; + + swnode = dev_fwnode(&aggr->pdev->dev); platform_device_unregister(aggr->pdev); aggr->pdev = NULL; gpiod_remove_lookup_table(aggr->lookups); kfree(aggr->lookups->dev_id); kfree(aggr->lookups); + fwnode_remove_software_node(swnode); } static void gpio_aggregator_lockup_configfs(struct gpio_aggregator *aggr, -- cgit v1.2.3 From a4f0b001782b21663d10df983b4b208195bec66c Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Mon, 18 May 2026 11:06:55 +0200 Subject: vsock/virtio: reset connection on receiving queue overflow When there is no more space to queue an incoming packet, the packet is silently dropped. This causes data loss without any notification to either peer, since there is no retransmission. Under normal circumstances, this should never happen. However, it could happen if the other peer doesn't respect the credit, or if the skb overhead, which we recently began to take into account with commit 059b7dbd20a6 ("vsock/virtio: fix potential unbounded skb queue"), is too high. Fix this by resetting the connection and setting the local socket error to ENOBUFS when virtio_transport_recv_enqueue() can no longer queue a packet, so both peers are explicitly notified of the failure rather than silently losing data. Fixes: ae6fcfbf5f03 ("vsock/virtio: discard packets if credit is not respected") Cc: stable@vger.kernel.org Signed-off-by: Stefano Garzarella Link: https://patch.msgid.link/20260518090656.134588-2-sgarzare@redhat.com Signed-off-by: Paolo Abeni --- net/vmw_vsock/virtio_transport_common.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c index 1e3409d28164..5028ff534888 100644 --- a/net/vmw_vsock/virtio_transport_common.c +++ b/net/vmw_vsock/virtio_transport_common.c @@ -1335,7 +1335,7 @@ destroy: return err; } -static void +static bool virtio_transport_recv_enqueue(struct vsock_sock *vsk, struct sk_buff *skb) { @@ -1350,10 +1350,8 @@ virtio_transport_recv_enqueue(struct vsock_sock *vsk, spin_lock_bh(&vvs->rx_lock); can_enqueue = virtio_transport_inc_rx_pkt(vvs, len); - if (!can_enqueue) { - free_pkt = true; + if (!can_enqueue) goto out; - } if (le32_to_cpu(hdr->flags) & VIRTIO_VSOCK_SEQ_EOM) vvs->msg_count++; @@ -1393,6 +1391,8 @@ out: spin_unlock_bh(&vvs->rx_lock); if (free_pkt) kfree_skb(skb); + + return can_enqueue; } static int @@ -1405,7 +1405,17 @@ virtio_transport_recv_connected(struct sock *sk, switch (le16_to_cpu(hdr->op)) { case VIRTIO_VSOCK_OP_RW: - virtio_transport_recv_enqueue(vsk, skb); + if (!virtio_transport_recv_enqueue(vsk, skb)) { + /* There is no more space to queue the packet, so let's + * close the connection; otherwise, we'll lose data. + */ + (void)virtio_transport_reset(vsk, skb); + virtio_transport_do_close(vsk, true); + sk->sk_err = ENOBUFS; + sk_error_report(sk); + vsock_remove_sock(vsk); + break; + } vsock_data_ready(sk); return err; case VIRTIO_VSOCK_OP_CREDIT_REQUEST: -- cgit v1.2.3 From c6087c5aaad6d1b8be1a1a641e0a422218ade911 Mon Sep 17 00:00:00 2001 From: Stefano Garzarella Date: Mon, 18 May 2026 11:06:56 +0200 Subject: vsock/virtio: fix skb overhead accounting to preserve full buf_alloc After commit 059b7dbd20a6 ("vsock/virtio: fix potential unbounded skb queue"), virtio_transport_inc_rx_pkt() subtracts per-skb overhead from buf_alloc when checking whether a new packet fits. This reduces the effective receive buffer below what the user configured via SO_VM_SOCKETS_BUFFER_SIZE, causing legitimate data packets to be silently dropped and applications that rely on the full buffer size to deadlock. Also, the reduced space is not communicated to the remote peer, so its credit calculation accounts more credit than the receiver will actually accept, causing data loss (there is no retransmission). With this approach we currently have failures in tools/testing/vsock/vsock_test.c. Test 18 sometimes fails, while test 22 always fails in this way: 18 - SOCK_STREAM MSG_ZEROCOPY...hash mismatch 22 - SOCK_STREAM virtio credit update + SO_RCVLOWAT...send failed: Resource temporarily unavailable Fix by allowing at most `buf_alloc * 2` as the total budget for payload plus skb overhead in virtio_transport_inc_rx_pkt(), similar to how SO_RCVBUF is doubled to reserve space for sk_buff metadata. This preserves the full buf_alloc for payload under normal operation, while still bounding the skb queue growth. With this patch, all tests in tools/testing/vsock/vsock_test.c are now passing again. Fixes: 059b7dbd20a6 ("vsock/virtio: fix potential unbounded skb queue") Cc: stable@vger.kernel.org Signed-off-by: Stefano Garzarella Link: https://patch.msgid.link/20260518090656.134588-3-sgarzare@redhat.com Signed-off-by: Paolo Abeni --- net/vmw_vsock/virtio_transport_common.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c index 5028ff534888..df3b418e0392 100644 --- a/net/vmw_vsock/virtio_transport_common.c +++ b/net/vmw_vsock/virtio_transport_common.c @@ -419,7 +419,14 @@ static bool virtio_transport_inc_rx_pkt(struct virtio_vsock_sock *vvs, { u64 skb_overhead = (skb_queue_len(&vvs->rx_queue) + 1) * SKB_TRUESIZE(0); - if (skb_overhead + vvs->buf_used + len > vvs->buf_alloc) + /* Allow at most buf_alloc * 2 total budget (payload + overhead), + * similar to how SO_RCVBUF is doubled to reserve space for sk_buff + * metadata. Check payload against buf_alloc to be sure the other + * peer is respecting the credit, and sk_buff overhead to bound + * queue growth. + */ + if ((u64)vvs->buf_used + len > vvs->buf_alloc || + skb_overhead > vvs->buf_alloc) return false; vvs->rx_bytes += len; -- cgit v1.2.3 From c69439a891ccb37ede5d68539636337c6bd92fab Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 18 May 2026 08:02:05 +0200 Subject: xfs: fix a buffer lookup against removal race When a buffer is freed either by LRU eviction or because it is unset, the lockref is marked as dead instantly, which prevents the buffer from being used after finding it in the buffer hash in xfs_buf_lookup and xfs_buf_find_insert. But the latter will then not add the new buffer to the hash because it already found an existing buffer. Fix this using in two places: Remove the buffer from the hash before marking the lockref dead so that that no buffer with a dead lockref can be found in the hash, but if we find one in xfs_buf_find_insert due to store reordering, handle this case correctly instead of returning an unhashed buffer. Fixes: 67fe4303972e ("xfs: don't keep a reference for buffers on the LRU") Reported-by: Andrey Albershteyn Reported-by: Carlos Maiolino Signed-off-by: Christoph Hellwig Reviewed-by: Andrey Albershteyn Reviewed-by: Carlos Maiolino Signed-off-by: Carlos Maiolino --- fs/xfs/xfs_buf.c | 34 ++++++++++++++++++++++++---------- 1 file changed, 24 insertions(+), 10 deletions(-) diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index 580d40a5ee57..0cea458f1353 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -472,6 +472,7 @@ xfs_buf_find_insert( /* The new buffer keeps the perag reference until it is freed. */ new_bp->b_pag = pag; +retry: rcu_read_lock(); bp = rhashtable_lookup_get_insert_fast(&btp->bt_hash, &new_bp->b_rhash_head, xfs_buf_hash_params); @@ -480,8 +481,16 @@ xfs_buf_find_insert( error = PTR_ERR(bp); goto out_free_buf; } - if (bp && lockref_get_not_dead(&bp->b_lockref)) { - /* found an existing buffer */ + if (bp) { + /* + * If there is an existing buffer with a dead lockref, retry + * until the new buffer is added, or a usable buffer is found. + */ + if (!lockref_get_not_dead(&bp->b_lockref)) { + rcu_read_unlock(); + cpu_relax(); + goto retry; + } rcu_read_unlock(); error = xfs_buf_find_lock(bp, flags); if (error) @@ -820,15 +829,20 @@ xfs_buf_destroy( ASSERT(__lockref_is_dead(&bp->b_lockref)); ASSERT(!(bp->b_flags & _XBF_DELWRI_Q)); + if (bp->b_pag) + xfs_perag_put(bp->b_pag); + xfs_buf_free(bp); +} + +static inline void +xfs_buf_kill( + struct xfs_buf *bp) +{ + lockref_mark_dead(&bp->b_lockref); if (!xfs_buf_is_uncached(bp)) { rhashtable_remove_fast(&bp->b_target->bt_hash, &bp->b_rhash_head, xfs_buf_hash_params); - - if (bp->b_pag) - xfs_perag_put(bp->b_pag); } - - xfs_buf_free(bp); } /* @@ -851,7 +865,7 @@ xfs_buf_rele( return; kill: - lockref_mark_dead(&bp->b_lockref); + xfs_buf_kill(bp); list_lru_del_obj(&bp->b_target->bt_lru, &bp->b_lru); spin_unlock(&bp->b_lockref.lock); @@ -1433,7 +1447,7 @@ xfs_buftarg_drain_rele( return LRU_SKIP; } - lockref_mark_dead(&bp->b_lockref); + xfs_buf_kill(bp); list_lru_isolate_move(lru, item, dispose); spin_unlock(&bp->b_lockref.lock); return LRU_REMOVED; @@ -1545,7 +1559,7 @@ xfs_buftarg_isolate( return LRU_ROTATE; } - lockref_mark_dead(&bp->b_lockref); + xfs_buf_kill(bp); list_lru_isolate_move(lru, item, dispose); spin_unlock(&bp->b_lockref.lock); return LRU_REMOVED; -- cgit v1.2.3 From a254b6d13b0edd6272926674d2afc46d46e496b7 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 20 May 2026 22:08:01 -0400 Subject: ring-buffer: Fix reporting of missed events in iterator When tracing is active while reading the trace file, if the iterator reading the buffer detects that the writer has passed the iterator head, it will reset and set a "missed events" flag. This flag is passed to the output processing to show the user that events were missed: CPU:4 [LOST EVENTS] The problem is that the flag is reset after it is checked in ring_buffer_iter_dropped(). But the "trace" file iterates over all the CPU ring buffers and it will check if they are dropped when figuring out which buffer to print next. This prematurely clears the missed_events flag if the CPU buffer with the missed events is not the one that is printed next. On the iteration where the CPU buffer with the missed events is printed, the check if it had missed events would return false and the output does not show that events were missed. Do not reset the missed_events flag when checking if there were missed events, but instead clear it when moving the iterator head to the next event. Cc: stable@vger.kernel.org Cc: Mathieu Desnoyers Link: https://patch.msgid.link/20260520220801.4fd09d13@fedora Fixes: c9b7a4a72ff64 ("ring-buffer/tracing: Have iterator acknowledge dropped events") Acked-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt --- kernel/trace/ring_buffer.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 5326924615a4..fcd93d49851e 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -5407,6 +5407,7 @@ static void rb_iter_reset(struct ring_buffer_iter *iter) iter->head_page = cpu_buffer->reader_page; iter->head = cpu_buffer->reader_page->read; iter->next_event = iter->head; + iter->missed_events = 0; iter->cache_reader_page = iter->head_page; iter->cache_read = cpu_buffer->read; @@ -6086,10 +6087,7 @@ ring_buffer_peek(struct trace_buffer *buffer, int cpu, u64 *ts, */ bool ring_buffer_iter_dropped(struct ring_buffer_iter *iter) { - bool ret = iter->missed_events != 0; - - iter->missed_events = 0; - return ret; + return iter->missed_events != 0; } EXPORT_SYMBOL_GPL(ring_buffer_iter_dropped); @@ -6251,7 +6249,7 @@ void ring_buffer_iter_advance(struct ring_buffer_iter *iter) unsigned long flags; raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags); - + iter->missed_events = 0; rb_advance_iter(iter); raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags); -- cgit v1.2.3 From a494d3c8d5392bcdff83c2a593df0c160ff9f322 Mon Sep 17 00:00:00 2001 From: "Masami Hiramatsu (Google)" Date: Thu, 30 Apr 2026 12:28:16 +0900 Subject: ring-buffer: Flush and stop persistent ring buffer on panic On real hardware, panic and machine reboot may not flush hardware cache to memory. This means the persistent ring buffer, which relies on a coherent state of memory, may not have its events written to the buffer and they may be lost. Moreover, there may be inconsistency with the counters which are used for validation of the integrity of the persistent ring buffer which may cause all data to be discarded. To avoid this issue, stop recording of the ring buffer on panic and flush the cache of the ring buffer's memory. Fixes: e645535a954a ("tracing: Add option to use memmapped memory for trace boot instance") Cc: stable@vger.kernel.org Cc: Will Deacon Cc: Mathieu Desnoyers Cc: Ian Rogers Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com Signed-off-by: Masami Hiramatsu (Google) Acked-by: Catalin Marinas Acked-by: Geert Uytterhoeven Signed-off-by: Steven Rostedt --- arch/alpha/include/asm/Kbuild | 1 + arch/arc/include/asm/Kbuild | 1 + arch/arm/include/asm/Kbuild | 1 + arch/arm64/include/asm/ring_buffer.h | 10 ++++++++++ arch/csky/include/asm/Kbuild | 1 + arch/hexagon/include/asm/Kbuild | 1 + arch/loongarch/include/asm/Kbuild | 1 + arch/m68k/include/asm/Kbuild | 1 + arch/microblaze/include/asm/Kbuild | 1 + arch/mips/include/asm/Kbuild | 1 + arch/nios2/include/asm/Kbuild | 1 + arch/openrisc/include/asm/Kbuild | 1 + arch/parisc/include/asm/Kbuild | 1 + arch/powerpc/include/asm/Kbuild | 1 + arch/riscv/include/asm/Kbuild | 1 + arch/s390/include/asm/Kbuild | 1 + arch/sh/include/asm/Kbuild | 1 + arch/sparc/include/asm/Kbuild | 1 + arch/um/include/asm/Kbuild | 1 + arch/x86/include/asm/Kbuild | 1 + arch/xtensa/include/asm/Kbuild | 1 + include/asm-generic/ring_buffer.h | 13 +++++++++++++ kernel/trace/ring_buffer.c | 22 ++++++++++++++++++++++ 23 files changed, 65 insertions(+) create mode 100644 arch/arm64/include/asm/ring_buffer.h create mode 100644 include/asm-generic/ring_buffer.h diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild index 483965c5a4de..b154b4e3dfa8 100644 --- a/arch/alpha/include/asm/Kbuild +++ b/arch/alpha/include/asm/Kbuild @@ -5,4 +5,5 @@ generic-y += agp.h generic-y += asm-offsets.h generic-y += kvm_para.h generic-y += mcs_spinlock.h +generic-y += ring_buffer.h generic-y += text-patching.h diff --git a/arch/arc/include/asm/Kbuild b/arch/arc/include/asm/Kbuild index 4c69522e0328..483caacc6988 100644 --- a/arch/arc/include/asm/Kbuild +++ b/arch/arc/include/asm/Kbuild @@ -5,5 +5,6 @@ generic-y += extable.h generic-y += kvm_para.h generic-y += mcs_spinlock.h generic-y += parport.h +generic-y += ring_buffer.h generic-y += user.h generic-y += text-patching.h diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 03657ff8fbe3..decad5f2c826 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -3,6 +3,7 @@ generic-y += early_ioremap.h generic-y += extable.h generic-y += flat.h generic-y += parport.h +generic-y += ring_buffer.h generated-y += mach-types.h generated-y += unistd-nr.h diff --git a/arch/arm64/include/asm/ring_buffer.h b/arch/arm64/include/asm/ring_buffer.h new file mode 100644 index 000000000000..62316c406888 --- /dev/null +++ b/arch/arm64/include/asm/ring_buffer.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _ASM_ARM64_RING_BUFFER_H +#define _ASM_ARM64_RING_BUFFER_H + +#include + +/* Flush D-cache on persistent ring buffer */ +#define arch_ring_buffer_flush_range(start, end) dcache_clean_pop(start, end) + +#endif /* _ASM_ARM64_RING_BUFFER_H */ diff --git a/arch/csky/include/asm/Kbuild b/arch/csky/include/asm/Kbuild index 3a5c7f6e5aac..7dca0c6cdc84 100644 --- a/arch/csky/include/asm/Kbuild +++ b/arch/csky/include/asm/Kbuild @@ -9,6 +9,7 @@ generic-y += qrwlock.h generic-y += qrwlock_types.h generic-y += qspinlock.h generic-y += parport.h +generic-y += ring_buffer.h generic-y += user.h generic-y += vmlinux.lds.h generic-y += text-patching.h diff --git a/arch/hexagon/include/asm/Kbuild b/arch/hexagon/include/asm/Kbuild index 1efa1e993d4b..0f887d4238ed 100644 --- a/arch/hexagon/include/asm/Kbuild +++ b/arch/hexagon/include/asm/Kbuild @@ -5,4 +5,5 @@ generic-y += extable.h generic-y += iomap.h generic-y += kvm_para.h generic-y += mcs_spinlock.h +generic-y += ring_buffer.h generic-y += text-patching.h diff --git a/arch/loongarch/include/asm/Kbuild b/arch/loongarch/include/asm/Kbuild index 9034b583a88a..7e92957baf6a 100644 --- a/arch/loongarch/include/asm/Kbuild +++ b/arch/loongarch/include/asm/Kbuild @@ -10,5 +10,6 @@ generic-y += qrwlock.h generic-y += user.h generic-y += ioctl.h generic-y += mmzone.h +generic-y += ring_buffer.h generic-y += statfs.h generic-y += text-patching.h diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index b282e0dd8dc1..62543bf305ff 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -3,5 +3,6 @@ generated-y += syscall_table.h generic-y += extable.h generic-y += kvm_para.h generic-y += mcs_spinlock.h +generic-y += ring_buffer.h generic-y += spinlock.h generic-y += text-patching.h diff --git a/arch/microblaze/include/asm/Kbuild b/arch/microblaze/include/asm/Kbuild index 7178f990e8b3..0030309b47ad 100644 --- a/arch/microblaze/include/asm/Kbuild +++ b/arch/microblaze/include/asm/Kbuild @@ -5,6 +5,7 @@ generic-y += extable.h generic-y += kvm_para.h generic-y += mcs_spinlock.h generic-y += parport.h +generic-y += ring_buffer.h generic-y += syscalls.h generic-y += tlb.h generic-y += user.h diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild index 684569b2ecd6..9771c3d85074 100644 --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -12,5 +12,6 @@ generic-y += mcs_spinlock.h generic-y += parport.h generic-y += qrwlock.h generic-y += qspinlock.h +generic-y += ring_buffer.h generic-y += user.h generic-y += text-patching.h diff --git a/arch/nios2/include/asm/Kbuild b/arch/nios2/include/asm/Kbuild index 28004301c236..0a2530964413 100644 --- a/arch/nios2/include/asm/Kbuild +++ b/arch/nios2/include/asm/Kbuild @@ -5,6 +5,7 @@ generic-y += cmpxchg.h generic-y += extable.h generic-y += kvm_para.h generic-y += mcs_spinlock.h +generic-y += ring_buffer.h generic-y += spinlock.h generic-y += user.h generic-y += text-patching.h diff --git a/arch/openrisc/include/asm/Kbuild b/arch/openrisc/include/asm/Kbuild index cef49d60d74c..8aa34621702d 100644 --- a/arch/openrisc/include/asm/Kbuild +++ b/arch/openrisc/include/asm/Kbuild @@ -8,4 +8,5 @@ generic-y += spinlock_types.h generic-y += spinlock.h generic-y += qrwlock_types.h generic-y += qrwlock.h +generic-y += ring_buffer.h generic-y += user.h diff --git a/arch/parisc/include/asm/Kbuild b/arch/parisc/include/asm/Kbuild index 4fb596d94c89..d48d158f7241 100644 --- a/arch/parisc/include/asm/Kbuild +++ b/arch/parisc/include/asm/Kbuild @@ -4,4 +4,5 @@ generated-y += syscall_table_64.h generic-y += agp.h generic-y += kvm_para.h generic-y += mcs_spinlock.h +generic-y += ring_buffer.h generic-y += user.h diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild index 2e23533b67e3..805b5aeebb6f 100644 --- a/arch/powerpc/include/asm/Kbuild +++ b/arch/powerpc/include/asm/Kbuild @@ -5,4 +5,5 @@ generated-y += syscall_table_spu.h generic-y += agp.h generic-y += mcs_spinlock.h generic-y += qrwlock.h +generic-y += ring_buffer.h generic-y += early_ioremap.h diff --git a/arch/riscv/include/asm/Kbuild b/arch/riscv/include/asm/Kbuild index bd5fc9403295..7721b63642f4 100644 --- a/arch/riscv/include/asm/Kbuild +++ b/arch/riscv/include/asm/Kbuild @@ -14,5 +14,6 @@ generic-y += ticket_spinlock.h generic-y += qrwlock.h generic-y += qrwlock_types.h generic-y += qspinlock.h +generic-y += ring_buffer.h generic-y += user.h generic-y += vmlinux.lds.h diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild index 80bad7de7a04..0c1fc47c3ba0 100644 --- a/arch/s390/include/asm/Kbuild +++ b/arch/s390/include/asm/Kbuild @@ -7,3 +7,4 @@ generated-y += unistd_nr.h generic-y += asm-offsets.h generic-y += mcs_spinlock.h generic-y += mmzone.h +generic-y += ring_buffer.h diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild index 4d3f10ed8275..f0403d3ee8ab 100644 --- a/arch/sh/include/asm/Kbuild +++ b/arch/sh/include/asm/Kbuild @@ -3,4 +3,5 @@ generated-y += syscall_table.h generic-y += kvm_para.h generic-y += mcs_spinlock.h generic-y += parport.h +generic-y += ring_buffer.h generic-y += text-patching.h diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild index 17ee8a273aa6..49c6bb326b75 100644 --- a/arch/sparc/include/asm/Kbuild +++ b/arch/sparc/include/asm/Kbuild @@ -4,4 +4,5 @@ generated-y += syscall_table_64.h generic-y += agp.h generic-y += kvm_para.h generic-y += mcs_spinlock.h +generic-y += ring_buffer.h generic-y += text-patching.h diff --git a/arch/um/include/asm/Kbuild b/arch/um/include/asm/Kbuild index 1b9b82bbe322..2a1629ba8140 100644 --- a/arch/um/include/asm/Kbuild +++ b/arch/um/include/asm/Kbuild @@ -17,6 +17,7 @@ generic-y += module.lds.h generic-y += parport.h generic-y += percpu.h generic-y += preempt.h +generic-y += ring_buffer.h generic-y += runtime-const.h generic-y += softirq_stack.h generic-y += switch_to.h diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild index 4566000e15c4..078fd2c0d69d 100644 --- a/arch/x86/include/asm/Kbuild +++ b/arch/x86/include/asm/Kbuild @@ -14,3 +14,4 @@ generic-y += early_ioremap.h generic-y += fprobe.h generic-y += mcs_spinlock.h generic-y += mmzone.h +generic-y += ring_buffer.h diff --git a/arch/xtensa/include/asm/Kbuild b/arch/xtensa/include/asm/Kbuild index 13fe45dea296..e57af619263a 100644 --- a/arch/xtensa/include/asm/Kbuild +++ b/arch/xtensa/include/asm/Kbuild @@ -6,5 +6,6 @@ generic-y += mcs_spinlock.h generic-y += parport.h generic-y += qrwlock.h generic-y += qspinlock.h +generic-y += ring_buffer.h generic-y += user.h generic-y += text-patching.h diff --git a/include/asm-generic/ring_buffer.h b/include/asm-generic/ring_buffer.h new file mode 100644 index 000000000000..201d2aee1005 --- /dev/null +++ b/include/asm-generic/ring_buffer.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Generic arch dependent ring_buffer macros. + */ +#ifndef __ASM_GENERIC_RING_BUFFER_H__ +#define __ASM_GENERIC_RING_BUFFER_H__ + +#include + +/* Flush cache on ring buffer range if needed. Do nothing by default. */ +#define arch_ring_buffer_flush_range(start, end) do { } while (0) + +#endif /* __ASM_GENERIC_RING_BUFFER_H__ */ diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index fcd93d49851e..7b07d2004cc6 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -31,6 +32,7 @@ #include #include +#include #include #include #include @@ -559,6 +561,7 @@ struct trace_buffer { unsigned long range_addr_start; unsigned long range_addr_end; + struct notifier_block flush_nb; struct ring_buffer_meta *meta; @@ -2521,6 +2524,16 @@ static void rb_free_cpu_buffer(struct ring_buffer_per_cpu *cpu_buffer) kfree(cpu_buffer); } +/* Stop recording on a persistent buffer and flush cache if needed. */ +static int rb_flush_buffer_cb(struct notifier_block *nb, unsigned long event, void *data) +{ + struct trace_buffer *buffer = container_of(nb, struct trace_buffer, flush_nb); + + ring_buffer_record_off(buffer); + arch_ring_buffer_flush_range(buffer->range_addr_start, buffer->range_addr_end); + return NOTIFY_DONE; +} + static struct trace_buffer *alloc_buffer(unsigned long size, unsigned flags, int order, unsigned long start, unsigned long end, @@ -2651,6 +2664,12 @@ static struct trace_buffer *alloc_buffer(unsigned long size, unsigned flags, mutex_init(&buffer->mutex); + /* Persistent ring buffer needs to flush cache before reboot. */ + if (start && end) { + buffer->flush_nb.notifier_call = rb_flush_buffer_cb; + atomic_notifier_chain_register(&panic_notifier_list, &buffer->flush_nb); + } + return_ptr(buffer); fail_free_buffers: @@ -2749,6 +2768,9 @@ ring_buffer_free(struct trace_buffer *buffer) { int cpu; + if (buffer->range_addr_start && buffer->range_addr_end) + atomic_notifier_chain_unregister(&panic_notifier_list, &buffer->flush_nb); + cpuhp_state_remove_instance(CPUHP_TRACE_RB_PREPARE, &buffer->node); irq_work_sync(&buffer->irq_work.work); -- cgit v1.2.3 From c2d2856cf6c9efccdf5e0d2564162ec616ce58cf Mon Sep 17 00:00:00 2001 From: David Carlier Date: Tue, 12 May 2026 14:54:20 +0100 Subject: tracing: Fix nr_subbufs initialization in simple_ring_buffer_init_mm() nr_subbufs in the ring buffer metadata is always initialized to zero because it is assigned from cpu_buffer->nr_pages before the page initialization loop has run. While nr_subbufs is not currently read by the kernel, it should reflect the actual buffer geometry in the meta page for correctness. Move the assignment after the page loop so that cpu_buffer->nr_pages holds the final count. Link: https://patch.msgid.link/20260512135420.99194-1-devnexen@gmail.com Fixes: 34e5b958bdad ("tracing: Introduce simple_ring_buffer") Reviewed-by: Vincent Donnefort Assisted-by: Claude:claude-opus-4-7 Signed-off-by: David Carlier Signed-off-by: Steven Rostedt --- kernel/trace/simple_ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/simple_ring_buffer.c b/kernel/trace/simple_ring_buffer.c index 02af2297ae5a..f731f14d0ff7 100644 --- a/kernel/trace/simple_ring_buffer.c +++ b/kernel/trace/simple_ring_buffer.c @@ -395,7 +395,6 @@ int simple_ring_buffer_init_mm(struct simple_rb_per_cpu *cpu_buffer, memset(cpu_buffer->meta, 0, sizeof(*cpu_buffer->meta)); cpu_buffer->meta->meta_page_size = PAGE_SIZE; - cpu_buffer->meta->nr_subbufs = cpu_buffer->nr_pages; /* The reader page is not part of the ring initially */ page = load_page(desc->page_va[0]); @@ -437,6 +436,7 @@ int simple_ring_buffer_init_mm(struct simple_rb_per_cpu *cpu_buffer, return ret; } + cpu_buffer->meta->nr_subbufs = cpu_buffer->nr_pages; /* Close the ring */ bpage->link.next = &cpu_buffer->tail_page->link; cpu_buffer->tail_page->link.prev = &bpage->link; -- cgit v1.2.3 From a0a2f42a37f90b29d8c43374dd9c8bd2f3e7bdcc Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Tue, 12 May 2026 15:16:14 +0100 Subject: tracing: Fix unload_page for simple_ring_buffer init rollback The unload_page callback expects the return value of load_page() as its argument: ret = load_page(va); unload(ret). Fix the rollback code in simple_ring_buffer_init_mm() where the descriptor's VA is used instead of the loaded page address. Link: https://patch.msgid.link/20260512141614.1759430-1-vdonnefort@google.com Fixes: 635923081c79 ("tracing: load/unload page callbacks for simple_ring_buffer") Signed-off-by: Vincent Donnefort Signed-off-by: Steven Rostedt --- kernel/trace/simple_ring_buffer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/simple_ring_buffer.c b/kernel/trace/simple_ring_buffer.c index f731f14d0ff7..f4642f5adda3 100644 --- a/kernel/trace/simple_ring_buffer.c +++ b/kernel/trace/simple_ring_buffer.c @@ -430,7 +430,7 @@ int simple_ring_buffer_init_mm(struct simple_rb_per_cpu *cpu_buffer, if (ret) { for (i--; i >= 0; i--) - unload_page((void *)desc->page_va[i]); + unload_page(bpages[i].page); unload_page(cpu_buffer->meta); return ret; -- cgit v1.2.3 From 057caace5214da3b457bbd295e1a2ad34d3685ea Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= Date: Wed, 20 May 2026 20:01:55 +0200 Subject: tracing: Create output file from cmd_check_undefined MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As the output file is currently never created, the check will run every time, even if the inputs have not changed. Create an empty output file which allows make to skip the execution when it is not necessary. Cc: Masami Hiramatsu Cc: Mathieu Desnoyers Cc: Vincent Donnefort Cc: Marc Zyngier Cc: Arnd Bergmann Link: https://patch.msgid.link/20260520-tracing-ringbuffer-check-v1-1-d979cfab1338@weissschuh.net Fixes: 1211907ac0b5 ("tracing: Generate undef symbols allowlist for simple_ring_buffer") Fixes: 58b4bd18390e ("tracing: Adjust cmd_check_undefined to show unexpected undefined symbols") Reviewed-by: Nathan Chancellor Tested-by: Nathan Chancellor Signed-off-by: Thomas Weißschuh Signed-off-by: Steven Rostedt --- kernel/trace/Makefile | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index 9b0834134cae..8d3d96e847d8 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -154,7 +154,8 @@ quiet_cmd_check_undefined = NM $< echo "Unexpected symbols in $<:" >&2; \ echo "$$undefsyms" >&2; \ false; \ - fi + fi; \ + touch $@ $(obj)/%.o.checked: $(obj)/%.o $(obj)/undefsyms_base.o FORCE $(call if_changed,check_undefined) -- cgit v1.2.3 From e70ae40d6660c5428c790c329318c570b4d038ab Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 18 May 2026 11:53:17 +0200 Subject: gpio: sim: lock device when calling device_is_bound() The kerneldoc for device_is_bound() says it must be called with the device lock taken. Add missing synchronization to this driver. Fixes: 7fb3287946f9 ("gpio: sim: stop using dev-sync-probe") Link: https://patch.msgid.link/20260518-gpio-dev-lock-v1-1-cc4736f3ff0b@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-sim.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpio-sim.c b/drivers/gpio/gpio-sim.c index e19701c2ed67..0da2c5a45843 100644 --- a/drivers/gpio/gpio-sim.c +++ b/drivers/gpio/gpio-sim.c @@ -901,7 +901,7 @@ static int gpio_sim_device_activate(struct gpio_sim_device *dev) struct platform_device *pdev; struct fwnode_handle *swnode; struct gpio_sim_bank *bank; - int ret; + int ret = 0; lockdep_assert_held(&dev->lock); @@ -945,9 +945,12 @@ static int gpio_sim_device_activate(struct gpio_sim_device *dev) } wait_for_device_probe(); - if (!device_is_bound(&pdev->dev)) { - ret = -ENXIO; - goto err_unregister_pdev; + + scoped_guard(device, &pdev->dev) { + if (!device_is_bound(&pdev->dev)) { + ret = -ENXIO; + goto err_unregister_pdev; + } } dev->pdev = pdev; -- cgit v1.2.3 From 598a2b3e2e0e6aa2e9f7843c96c45b5ea11e0411 Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 18 May 2026 11:53:18 +0200 Subject: gpio: aggregator: lock device when calling device_is_bound() The kerneldoc for device_is_bound() says it must be called with the device lock taken. Add missing synchronization to this driver. Fixes: 3a27f40b4570 ("gpio: aggregator: stop using dev-sync-probe") Link: https://patch.msgid.link/20260518-gpio-dev-lock-v1-2-cc4736f3ff0b@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-aggregator.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c index a9ad809708fb..bc6699a821ee 100644 --- a/drivers/gpio/gpio-aggregator.c +++ b/drivers/gpio/gpio-aggregator.c @@ -968,9 +968,12 @@ static int gpio_aggregator_activate(struct gpio_aggregator *aggr) } wait_for_device_probe(); - if (!device_is_bound(&pdev->dev)) { - ret = -ENXIO; - goto err_unregister_pdev; + + scoped_guard(device, &pdev->dev) { + if (!device_is_bound(&pdev->dev)) { + ret = -ENXIO; + goto err_unregister_pdev; + } } aggr->pdev = pdev; -- cgit v1.2.3 From a4fa45c1d980bc2b9837f469119af24a9304a1fc Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 18 May 2026 11:53:19 +0200 Subject: gpio: virtuser: lock device when calling device_is_bound() The kerneldoc for device_is_bound() says it must be called with the device lock taken. Add missing synchronization to this driver. Fixes: c3e2a8aef28c ("gpio: virtuser: stop using dev-sync-probe") Link: https://patch.msgid.link/20260518-gpio-dev-lock-v1-3-cc4736f3ff0b@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-virtuser.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-virtuser.c b/drivers/gpio/gpio-virtuser.c index fe0eac920ced..128520d340d4 100644 --- a/drivers/gpio/gpio-virtuser.c +++ b/drivers/gpio/gpio-virtuser.c @@ -1477,9 +1477,12 @@ gpio_virtuser_device_activate(struct gpio_virtuser_device *dev) } wait_for_device_probe(); - if (!device_is_bound(&pdev->dev)) { - ret = -ENXIO; - goto err_unregister_pdev; + + scoped_guard(device, &pdev->dev) { + if (!device_is_bound(&pdev->dev)) { + ret = -ENXIO; + goto err_unregister_pdev; + } } dev->pdev = pdev; -- cgit v1.2.3 From 03d8273542146f228c0019f08b57545fdee79704 Mon Sep 17 00:00:00 2001 From: WANG Rui Date: Thu, 21 May 2026 20:58:36 +0800 Subject: efi/loongarch: Randomize kernel preferred address for KASLR Introduce efi_get_kimg_kaslr_address() helper to compute the preferred kernel image load address dynamically when CONFIG_RANDOMIZE_BASE is enabled. The function derives a random offset by using the EFI-provided randomness combined with the timer tick value, and constrains it within CONFIG_RANDOMIZE_BASE_MAX_OFFSET. Update EFI_KIMG_PREFERRED_ADDRESS to call this helper so that the EFI stub can select a randomized load address when KASLR is active, while preserving the original base address behavior when KASLR is disabled or "nokaslr" is specified. Note: LoongArch can't KASLR for hibernation, so set efi_nokaslr to true if "resume=" is explicitly specified in cmdline. Acked-by: Ard Biesheuvel Signed-off-by: WANG Rui Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/efi.h | 4 +++- drivers/firmware/efi/libstub/efi-stub-helper.c | 4 ++++ drivers/firmware/efi/libstub/loongarch.c | 16 ++++++++++++++++ 3 files changed, 23 insertions(+), 1 deletion(-) diff --git a/arch/loongarch/include/asm/efi.h b/arch/loongarch/include/asm/efi.h index eddc8e79b3fa..1ad764b18c3e 100644 --- a/arch/loongarch/include/asm/efi.h +++ b/arch/loongarch/include/asm/efi.h @@ -30,6 +30,8 @@ static inline unsigned long efi_get_kimg_min_align(void) return SZ_2M; } -#define EFI_KIMG_PREFERRED_ADDRESS PHYSADDR(VMLINUX_LOAD_ADDRESS) +unsigned long efi_get_kimg_kaslr_address(void); + +#define EFI_KIMG_PREFERRED_ADDRESS efi_get_kimg_kaslr_address() #endif /* _ASM_LOONGARCH_EFI_H */ diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c index 7aa2f9ad2935..f27f2e1f0019 100644 --- a/drivers/firmware/efi/libstub/efi-stub-helper.c +++ b/drivers/firmware/efi/libstub/efi-stub-helper.c @@ -79,6 +79,10 @@ efi_status_t efi_parse_options(char const *cmdline) efi_noinitrd = true; } else if (IS_ENABLED(CONFIG_X86_64) && !strcmp(param, "no5lvl")) { efi_no5lvl = true; + } else if (IS_ENABLED(CONFIG_LOONGARCH) && + IS_ENABLED(CONFIG_HIBERNATION) && + !strcmp(param, "resume") && val) { + efi_nokaslr = true; /* LoongArch can't KASLR for hibernation */ } else if (IS_ENABLED(CONFIG_ARCH_HAS_MEM_ENCRYPT) && !strcmp(param, "mem_encrypt") && val) { if (parse_option_str(val, "on")) diff --git a/drivers/firmware/efi/libstub/loongarch.c b/drivers/firmware/efi/libstub/loongarch.c index f7938d5c196a..2b0c87dc9908 100644 --- a/drivers/firmware/efi/libstub/loongarch.c +++ b/drivers/firmware/efi/libstub/loongarch.c @@ -23,6 +23,22 @@ void efi_cache_sync_image(unsigned long image_base, unsigned long alloc_size) asm volatile ("ibar 0" ::: "memory"); } +unsigned long efi_get_kimg_kaslr_address(void) +{ + unsigned int random_offset = 0; + +#ifdef CONFIG_RANDOMIZE_BASE + if (!efi_nokaslr) { + efi_get_random_bytes(sizeof(random_offset), (u8 *)&random_offset); + random_offset ^= (random_get_entropy() << 16); + random_offset &= (CONFIG_RANDOMIZE_BASE_MAX_OFFSET - 1); + random_offset = ALIGN(random_offset + SZ_64K, SZ_64K); + } +#endif + + return PHYSADDR(VMLINUX_LOAD_ADDRESS) + random_offset; +} + struct exit_boot_struct { efi_memory_desc_t *runtime_map; int runtime_entry_count; -- cgit v1.2.3 From 08ade00fbb088b8f5a1af706ee970c26cf842bf0 Mon Sep 17 00:00:00 2001 From: WANG Rui Date: Thu, 21 May 2026 20:58:36 +0800 Subject: LoongArch: Skip relocation-time KASLR if already applied When the kernel is relocated during early boot (efistub or kexec_file), a randomized load address may has already been selected and applied. In this case, performing KASLR again in relocate.c is unnecessary. Note: strictly-defined KASLR means the kernel's final runtime address has a random offset from the kernel's load address, which is implemented in relocate.c; broadly-defined KALSR means the kernel's final runtime address has a random offset from the kernel's link address (a.k.a. VMLINUX_LOAD_ADDRESS), which also include the efistlub implementation, kexec_file implementation and QEMU direct kernel boot. kaslr_disabled() return true only means strictly-defined KASLR is disabled. Acked-by: Ard Biesheuvel Signed-off-by: WANG Rui Signed-off-by: Huacai Chen --- arch/loongarch/kernel/relocate.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/loongarch/kernel/relocate.c b/arch/loongarch/kernel/relocate.c index 16f6a9b39659..0a045964fad5 100644 --- a/arch/loongarch/kernel/relocate.c +++ b/arch/loongarch/kernel/relocate.c @@ -134,11 +134,23 @@ early_param("nokaslr", nokaslr); #define KASLR_DISABLED_MESSAGE "KASLR is disabled by %s in %s cmdline.\n" +/* + * Note: strictly-defined KASLR means the kernel's final runtime address + * has a random offset from the kernel's load address, which is implemented + * in relocate.c; broadly-defined KALSR means the kernel's final runtime + * address has a random offset from the kernel's link address (a.k.a. + * VMLINUX_LOAD_ADDRESS), which also include the efistlub implementation, + * kexec_file implementation and QEMU direct kernel boot. kaslr_disabled() + * return true only means strictly-defined KASLR is disabled. + */ static inline __init bool kaslr_disabled(void) { char *str; const char *builtin_cmdline = CONFIG_CMDLINE; + if (kaslr_offset()) + return true; /* KASLR is performed during early boot. */ + str = strstr(builtin_cmdline, "nokaslr"); if (str == builtin_cmdline || (str > builtin_cmdline && *(str - 1) == ' ')) { pr_info(KASLR_DISABLED_MESSAGE, "\'nokaslr\'", "built-in"); -- cgit v1.2.3 From 5b710aa89343c5217889b7788e279565b36e0e5e Mon Sep 17 00:00:00 2001 From: WANG Rui Date: Thu, 21 May 2026 20:58:36 +0800 Subject: LoongArch: Avoid initrd overlap during kernel relocation Validate the relocation address against the initrd region specified via "initrd=" or "initrdmem=" on the command line. Reject relocation targets that overlap the initrd to prevent memory corruption during early boot. Acked-by: Ard Biesheuvel Signed-off-by: WANG Rui Signed-off-by: Huacai Chen --- arch/loongarch/kernel/relocate.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/loongarch/kernel/relocate.c b/arch/loongarch/kernel/relocate.c index 0a045964fad5..4b61a9632a98 100644 --- a/arch/loongarch/kernel/relocate.c +++ b/arch/loongarch/kernel/relocate.c @@ -222,14 +222,52 @@ static inline void __init *determine_relocation_address(void) return RELOCATED_KASLR(destination); } +static unsigned long __init determine_initrd_address(unsigned long *size) +{ + unsigned long start = 0; + unsigned long key_length; + char *p, *endp, *key = "initrd="; + + key_length = strlen(key); + p = strstr(boot_command_line, key); + + if (!p) { + key = "initrdmem="; + key_length = strlen(key); + p = strstr(boot_command_line, key); + } + + if (p == boot_command_line || (p > boot_command_line && *(p - 1) == ' ')) { + p += key_length; + start = memparse(p, &endp); + if (*endp == ',') + *size = memparse(endp + 1, NULL); + } + + return start; +} + static inline int __init relocation_addr_valid(void *location_new) { + unsigned long kernel_start, kernel_size; + unsigned long initrd_start, initrd_size = 0; + if ((unsigned long)location_new & 0x00000ffff) return 0; /* Inappropriately aligned new location */ if ((unsigned long)location_new < (unsigned long)_end) return 0; /* New location overlaps original kernel */ + initrd_start = determine_initrd_address(&initrd_size); + if (initrd_start && initrd_size) { + kernel_start = PHYSADDR(location_new); + kernel_size = (unsigned long)_end - (unsigned long)_text; + + if (kernel_start < (initrd_start + initrd_size) && + initrd_start < (kernel_start + kernel_size)) + return 0; /* initrd/initramfs overlaps kernel */ + } + return 1; } #endif -- cgit v1.2.3 From 0ccc9d47cf020994097ff51827cebd04aa2b0bf4 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Thu, 21 May 2026 20:58:40 +0800 Subject: LoongArch: Remove unused code to avoid build warning After commit feee6b2989165631b1 ("mm/memory_hotplug: shrink zones when offlining memory"), __remove_pages() doesn't need the "zone" parameter so the "page" variable is also unused. Remove the unused code to avoid such build warning: arch/loongarch/mm/init.c: In function 'arch_remove_memory': arch/loongarch/mm/init.c:134:22: warning: variable 'page' set but not used [-Wunused-but-set-variable=] 134 | struct page *page = pfn_to_page(start_pfn); Cc: Reviewed-by: Guo Ren Signed-off-by: Huacai Chen --- arch/loongarch/mm/init.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/loongarch/mm/init.c b/arch/loongarch/mm/init.c index 3f9ab54114c5..031b39eb081c 100644 --- a/arch/loongarch/mm/init.c +++ b/arch/loongarch/mm/init.c @@ -123,11 +123,7 @@ void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap) { unsigned long start_pfn = start >> PAGE_SHIFT; unsigned long nr_pages = size >> PAGE_SHIFT; - struct page *page = pfn_to_page(start_pfn); - /* With altmap the first mapped page is offset from @start */ - if (altmap) - page += vmem_altmap_offset(altmap); __remove_pages(start_pfn, nr_pages, altmap); } #endif -- cgit v1.2.3 From 6c4e001cb0567b81340270d8fc3d53e39435ae70 Mon Sep 17 00:00:00 2001 From: Kean Ren Date: Thu, 21 May 2026 11:52:27 +0800 Subject: hwmon: (lenovo-ec-sensors): Convert to devm_request_region() Replace manual request_region()/release_region() with devm_request_region(). This lets the device-managed framework handle I/O region lifetime automatically and fixes: - A double release_region() when probe fails after acquiring the I/O region: the probe error path releases it, and then lenovo_ec_init() releases it again on the same error path. - A release-after-use window in lenovo_ec_exit() where release_region() was called before platform_device_unregister(), leaving the hwmon device active with a released I/O region. - Missing release_region() in lenovo_ec_probe() if devm_hwmon_device_register_with_info() fails. Remove all four manual release_region() calls that are now handled automatically and replace request_region with devm_request_region, use dev_err replace pr_err. Also remove the now-unnecessary braces around the single-statement if body. Fixes: 70118f85e6538 ("hwmon: Add EC Chip driver for Lenovo ThinkStation motherboards") Reviewed-by: Mark Pearson Signed-off-by: Kean Ren Link: https://lore.kernel.org/r/20260521035228.533317-2-rh_king@163.com Signed-off-by: Guenter Roeck --- drivers/hwmon/lenovo-ec-sensors.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/hwmon/lenovo-ec-sensors.c b/drivers/hwmon/lenovo-ec-sensors.c index 8681bbf6665b..a16cc5e4053a 100644 --- a/drivers/hwmon/lenovo-ec-sensors.c +++ b/drivers/hwmon/lenovo-ec-sensors.c @@ -519,8 +519,8 @@ static int lenovo_ec_probe(struct platform_device *pdev) if (!ec_data) return -ENOMEM; - if (!request_region(IO_REGION_START, IO_REGION_LENGTH, "LNV-WKS")) { - pr_err(":request fail\n"); + if (!devm_request_region(dev, IO_REGION_START, IO_REGION_LENGTH, "LNV-WKS")) { + dev_err(dev, "Failed to request I/O region\n"); return -EIO; } @@ -540,10 +540,8 @@ static int lenovo_ec_probe(struct platform_device *pdev) if ((inb_p(MCHP_EMI0_EC_DATA_BYTE0) != 'M') && (inb_p(MCHP_EMI0_EC_DATA_BYTE1) != 'C') && (inb_p(MCHP_EMI0_EC_DATA_BYTE2) != 'H') && - (inb_p(MCHP_EMI0_EC_DATA_BYTE3) != 'P')) { - release_region(IO_REGION_START, IO_REGION_LENGTH); + (inb_p(MCHP_EMI0_EC_DATA_BYTE3) != 'P')) return -ENODEV; - } dmi_id = dmi_first_match(thinkstation_dmi_table); @@ -577,7 +575,6 @@ static int lenovo_ec_probe(struct platform_device *pdev) lenovo_ec_chip_info.info = lenovo_ec_hwmon_info_p8; break; default: - release_region(IO_REGION_START, IO_REGION_LENGTH); return -ENODEV; } @@ -606,10 +603,8 @@ static int __init lenovo_ec_init(void) platform_create_bundle(&lenovo_ec_sensors_platform_driver, lenovo_ec_probe, NULL, 0, NULL, 0); - if (IS_ERR(lenovo_ec_sensors_platform_device)) { - release_region(IO_REGION_START, IO_REGION_LENGTH); + if (IS_ERR(lenovo_ec_sensors_platform_device)) return PTR_ERR(lenovo_ec_sensors_platform_device); - } return 0; } @@ -617,7 +612,6 @@ module_init(lenovo_ec_init); static void __exit lenovo_ec_exit(void) { - release_region(IO_REGION_START, IO_REGION_LENGTH); platform_device_unregister(lenovo_ec_sensors_platform_device); platform_driver_unregister(&lenovo_ec_sensors_platform_driver); } -- cgit v1.2.3 From e6056b1f5a38bbe57ccbbba2609efecbd87ae08c Mon Sep 17 00:00:00 2001 From: Kean Ren Date: Thu, 21 May 2026 11:52:28 +0800 Subject: hwmon: (lenovo-ec-sensors): Fix EC "MCHP" signature validation logic The EC signature check uses && instead of || between the four byte comparisons. With &&, the condition is true only when ALL four bytes fail to match simultaneously, meaning the driver accepts a device as a valid Microchip EC if ANY single byte of the 4-byte "MCHP" signature happens to match. Due to short-circuit evaluation, if the first byte reads back as 'M' (0x4D, a very common register value), the remaining three comparisons are skipped entirely and the device is accepted. Change && to || so the check rejects devices that do not fully match the expected EC signature, as originally intended. Fixes: 70118f85e6538 ("hwmon: Add EC Chip driver for Lenovo ThinkStation motherboards") Reviewed-by: Mark Pearson Signed-off-by: Kean Ren Link: https://lore.kernel.org/r/20260521035228.533317-3-rh_king@163.com Signed-off-by: Guenter Roeck --- drivers/hwmon/lenovo-ec-sensors.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/lenovo-ec-sensors.c b/drivers/hwmon/lenovo-ec-sensors.c index a16cc5e4053a..24a182abf9a3 100644 --- a/drivers/hwmon/lenovo-ec-sensors.c +++ b/drivers/hwmon/lenovo-ec-sensors.c @@ -537,9 +537,9 @@ static int lenovo_ec_probe(struct platform_device *pdev) outw_p(MCHP_SING_IDX, MCHP_EMI0_EC_ADDRESS); mutex_unlock(&ec_data->mec_mutex); - if ((inb_p(MCHP_EMI0_EC_DATA_BYTE0) != 'M') && - (inb_p(MCHP_EMI0_EC_DATA_BYTE1) != 'C') && - (inb_p(MCHP_EMI0_EC_DATA_BYTE2) != 'H') && + if ((inb_p(MCHP_EMI0_EC_DATA_BYTE0) != 'M') || + (inb_p(MCHP_EMI0_EC_DATA_BYTE1) != 'C') || + (inb_p(MCHP_EMI0_EC_DATA_BYTE2) != 'H') || (inb_p(MCHP_EMI0_EC_DATA_BYTE3) != 'P')) return -ENODEV; -- cgit v1.2.3 From b86095e3d7dcf2bf80c747349a35912a87a85098 Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Fri, 15 May 2026 15:11:47 -0700 Subject: hwmon: (pmbus/adm1266) seed timestamp from the real-time clock adm1266_set_rtc() seeds the chip's SET_RTC register from ktime_get_seconds(), which returns CLOCK_MONOTONIC -- i.e. seconds since the host last booted, not seconds since the Unix epoch. The chip stamps that value into every blackbox record it captures. Userspace reading those timestamps back expects wall-clock seconds: that's what the SET_RTC frame layout documents (datasheet Rev. D, Table 84) and what every other consumer of "seconds since epoch" assumes. Seeding from CLOCK_MONOTONIC gives blackbox records a timestamp that is only meaningful within a single boot of the host and silently resets to small values on every reboot. Switch to ktime_get_real_seconds() so the seed matches what the register is documented to hold. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-1-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index d90f8f80be8e..a86666c73a5e 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -432,7 +432,7 @@ static int adm1266_set_rtc(struct adm1266_data *data) char write_buf[6]; int i; - kt = ktime_get_seconds(); + kt = ktime_get_real_seconds(); memset(write_buf, 0, sizeof(write_buf)); -- cgit v1.2.3 From eee213daa1e1b402eb631bcd1b8c5aa340a6b081 Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Fri, 15 May 2026 15:11:48 -0700 Subject: hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and passes it to i2c_smbus_read_block_data() to retrieve the 4-byte BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour caller buffer sizes -- it memcpy()s data.block[0] bytes from the SMBus transaction (where data.block[0] is the length byte returned by the slave device, up to I2C_SMBUS_BLOCK_MAX = 32): memcpy(values, &data.block[1], data.block[0]); If the device returns any block length above 5, the call overflows the caller's 5-byte stack buffer before the post-call if (ret != 4) return -EIO; check has a chance to reject the response. Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room for any well-formed SMBus block response, matching the convention used by the other i2c_smbus_read_block_data() callers in this driver. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-2-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index a86666c73a5e..94691dec1359 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -349,7 +349,7 @@ static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *read_buff) { int record_count; char index; - u8 buf[5]; + u8 buf[I2C_SMBUS_BLOCK_MAX]; int ret; ret = i2c_smbus_read_block_data(data->client, ADM1266_BLACKBOX_INFO, buf); -- cgit v1.2.3 From 4afca954622d672ea65ed961bed01cf91caa034e Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Fri, 15 May 2026 15:11:49 -0700 Subject: hwmon: (pmbus/adm1266) reject implausible blackbox record_count adm1266_nvmem_read_blackbox() loops over a record_count that comes straight from byte 3 of the BLACKBOX_INFO response. The destination buffer is data->dev_mem, sized for the nvmem cell's declared 2048 bytes (ADM1266_BLACKBOX_MAX_RECORDS * ADM1266_BLACKBOX_SIZE = 32 * 64). A device that reports a record_count greater than 32 -- whether due to firmware bugs, bus corruption, or a non-responsive slave returning 0xff -- would walk read_buff past the end of the dev_mem allocation on the trailing iterations. Cap record_count at ADM1266_BLACKBOX_MAX_RECORDS (introduced here) before entering the loop and return -EIO on any larger value, so a malformed BLACKBOX_INFO response cannot drive the loop out of bounds. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-3-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 94691dec1359..43d9e7407795 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -46,6 +46,7 @@ #define ADM1266_BLACKBOX_OFFSET 0 #define ADM1266_BLACKBOX_SIZE 64 +#define ADM1266_BLACKBOX_MAX_RECORDS 32 #define ADM1266_PMBUS_BLOCK_MAX 255 @@ -360,6 +361,8 @@ static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *read_buff) return -EIO; record_count = buf[3]; + if (record_count > ADM1266_BLACKBOX_MAX_RECORDS) + return -EIO; for (index = 0; index < record_count; index++) { ret = adm1266_pmbus_block_xfer(data, ADM1266_READ_BLACKBOX, 1, &index, read_buff); -- cgit v1.2.3 From 487566cb1ccdf3756fdd7bf8d875e612ff3169bb Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Fri, 15 May 2026 15:11:50 -0700 Subject: hwmon: (pmbus/adm1266) include PEC byte in pmbus_block_xfer read buffer adm1266_pmbus_block_xfer() sets up the read transaction with .buf = data->read_buf, .len = ADM1266_PMBUS_BLOCK_MAX + 2, but read_buf in struct adm1266_data is declared as u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1]; For a max-length block response (length byte = 255 + up to 1 PEC byte), the i2c controller is told to write 257 bytes into a 256-byte buffer, putting one byte past the end of read_buf. The same response also makes the subsequent PEC compare if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) read a byte beyond the array. Bump the read_buf declaration to ADM1266_PMBUS_BLOCK_MAX + 2 so the buffer can hold the length byte, up to 255 payload bytes, and the PEC byte the i2c_msg length already accounts for. Fixes: 407dc802a9c0 ("hwmon: (pmbus/adm1266) Add Block process call") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-4-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 43d9e7407795..5c68e3177f64 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -61,7 +61,7 @@ struct adm1266_data { u8 *dev_mem; struct mutex buf_mutex; u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned; - u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned; + u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 2] ____cacheline_aligned; }; static const struct nvmem_cell_info adm1266_nvmem_cells[] = { -- cgit v1.2.3 From 4d25342543c01310fc4e0cba7cb17c775e2421e2 Mon Sep 17 00:00:00 2001 From: Shuicheng Lin Date: Thu, 14 May 2026 20:32:10 +0000 Subject: drm/xe/oa: Fix exec_queue leak on width check in stream open In xe_oa_stream_open_ioctl(), when param.exec_q->width > 1 the function returns -EOPNOTSUPP directly, skipping the existing err_exec_q cleanup path. The exec_queue reference obtained by xe_exec_queue_lookup() is leaked. The exec queue holds a reference on the xe_file, which is only dropped during queue teardown. The leaked lookup ref is not on the file's exec_queue xarray, so file close cannot release it. This keeps both the exec queue and the file private state pinned indefinitely. Jump to err_exec_q instead of returning directly so the reference is released. Fixes: f0ed39830e60 ("xe/oa: Fix query mode of operation for OAR/OAC") Assisted-by: Claude:claude-opus-4.6 Reviewed-by: Ashutosh Dixit Link: https://patch.msgid.link/20260514203210.593488-1-shuicheng.lin@intel.com Signed-off-by: Shuicheng Lin (cherry picked from commit 339fa0be9e4a5d69fa47e91f4a36574224fb478f) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/xe/xe_oa.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/xe/xe_oa.c b/drivers/gpu/drm/xe/xe_oa.c index 6337e671c97a..d908f4e03906 100644 --- a/drivers/gpu/drm/xe/xe_oa.c +++ b/drivers/gpu/drm/xe/xe_oa.c @@ -2032,8 +2032,10 @@ int xe_oa_stream_open_ioctl(struct drm_device *dev, u64 data, struct drm_file *f if (XE_IOCTL_DBG(oa->xe, !param.exec_q)) return -ENOENT; - if (XE_IOCTL_DBG(oa->xe, param.exec_q->width > 1)) - return -EOPNOTSUPP; + if (XE_IOCTL_DBG(oa->xe, param.exec_q->width > 1)) { + ret = -EOPNOTSUPP; + goto err_exec_q; + } } /* -- cgit v1.2.3 From b0ddda571d15528e6caee7090beff4a66dfdb1a2 Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Tue, 12 May 2026 11:56:28 -0700 Subject: hwmon: (pmbus/adm1266) include adapter number in GPIO line label Platforms that fit more than one ADM1266 on different I2C buses at the same 7-bit slave address (a common shelf-management pattern, e.g. one device per power domain) end up with duplicate GPIO line labels because the existing format only includes the slave address. Including the adapter number disambiguates them. The adapter number is formatted as decimal to match the i2c-N convention used elsewhere in Linux (sysfs paths, dev nodes); the slave address keeps its conventional hexadecimal form. The label is purely informational (visible via gpioinfo and the gpiochip /sys/class/gpio name); no DT or ABI consumer parses it. Fixes: d98dfad35c38c ("hwmon: (pmbus/adm1266) Add support for GPIOs") Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260512-adm1266-v3-5-a81a479b0bb0@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 5c68e3177f64..9820dc9e1f2e 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -291,8 +291,9 @@ static int adm1266_config_gpio(struct adm1266_data *data) int i; for (i = 0; i < ARRAY_SIZE(data->gpio_names); i++) { - gpio_name = devm_kasprintf(&data->client->dev, GFP_KERNEL, "adm1266-%x-%s", - data->client->addr, adm1266_names[i]); + gpio_name = devm_kasprintf(&data->client->dev, GFP_KERNEL, "adm1266-%d-%x-%s", + data->client->adapter->nr, data->client->addr, + adm1266_names[i]); if (!gpio_name) return -ENOMEM; -- cgit v1.2.3 From 43cae21424ff8e33894a0f86c6b80b840c049fd7 Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Fri, 15 May 2026 15:11:51 -0700 Subject: hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer adm1266_pmbus_block_xfer() copies the device-supplied block payload into the caller-provided buffer using the device-supplied length: memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]); The helper does not know how large data_r is and trusts the device to return at most one record's worth of bytes. adm1266_nvmem_read_blackbox() violates that contract: it advances read_buff inside data->dev_mem in ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns more than 64 bytes on the trailing record (read_buff offset 1984 in the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes before the post-call if (ret != ADM1266_BLACKBOX_SIZE) return -EIO; can reject the response. Contain the fix in the caller without changing the helper signature: read each record into a 255-byte local bounce buffer that matches the helper's maximum output, validate the returned length, and only then copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot. Fixes: 407dc802a9c0 ("hwmon: (pmbus/adm1266) Add Block process call") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260515-adm1266-fixes-v1-5-1c1ea1349cfe@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 9820dc9e1f2e..1fcd86ee96fe 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -349,6 +349,7 @@ static void adm1266_init_debugfs(struct adm1266_data *data) static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *read_buff) { + u8 record[ADM1266_PMBUS_BLOCK_MAX]; int record_count; char index; u8 buf[I2C_SMBUS_BLOCK_MAX]; @@ -366,13 +367,14 @@ static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *read_buff) return -EIO; for (index = 0; index < record_count; index++) { - ret = adm1266_pmbus_block_xfer(data, ADM1266_READ_BLACKBOX, 1, &index, read_buff); + ret = adm1266_pmbus_block_xfer(data, ADM1266_READ_BLACKBOX, 1, &index, record); if (ret < 0) return ret; if (ret != ADM1266_BLACKBOX_SIZE) return -EIO; + memcpy(read_buff, record, ADM1266_BLACKBOX_SIZE); read_buff += ADM1266_BLACKBOX_SIZE; } -- cgit v1.2.3 From d7834d92251baade796812876e95555e2066fa9f Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Mon, 18 May 2026 17:52:25 -0700 Subject: hwmon: (pmbus/adm1266) cap PDIO scan in get_multiple at ADM1266_PDIO_NR adm1266_gpio_get_multiple() iterates the PDIO portion of the caller-supplied mask using for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) { ... } where ADM1266_PDIO_STATUS is the PMBus command code (0xE9, i.e. 233), not the number of PDIO pins. The intended upper bound is ADM1266_GPIO_NR + ADM1266_PDIO_NR = 25. gpiolib hands in a mask sized for gc.ngpio (= 25 bits on this chip), so the iteration walks find_next_bit() up to 242, reading up to 217 extra bits (a handful of unsigned-long words: four on 64-bit, seven on 32-bit) of whatever lives past the end of the mask in the caller's stack. Any incidental set bit in that range then drives a set_bit(gpio_nr, bits) call that writes past the end of the caller-supplied bits array too -- both out-of-bounds. Substitute ADM1266_PDIO_NR for the constant so the scan stops at the last real PDIO bit. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-1-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 1fcd86ee96fe..4b2a8a765a4e 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -212,7 +212,7 @@ static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask status = read_buf[0] + (read_buf[1] << 8); *bits = 0; - for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) { + for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_NR) { if (test_bit(gpio_nr - ADM1266_GPIO_NR, &status)) set_bit(gpio_nr, bits); } -- cgit v1.2.3 From 3327a12aee9e10ffa903e28b8445dfd1af5307c0 Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Mon, 18 May 2026 17:52:26 -0700 Subject: hwmon: (pmbus/adm1266) don't clobber GPIO bits before PDIO read in get_multiple adm1266_gpio_get_multiple() zeroes *bits before the GPIO_STATUS loop and then a second time before the PDIO_STATUS loop: *bits = 0; for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) { ... set_bit(gpio_nr, bits); } ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, ...); ... *bits = 0; for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_NR) { ... set_bit(gpio_nr, bits); } The second *bits = 0 throws away every GPIO bit the first loop just populated, so callers asking for any combination of GPIO and PDIO pins always see the GPIO portion of the returned bits as zero. Drop the redundant second assignment so both halves of the result survive. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-2-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 4b2a8a765a4e..3bf512df30cd 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -211,7 +211,6 @@ static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask status = read_buf[0] + (read_buf[1] << 8); - *bits = 0; for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_NR) { if (test_bit(gpio_nr - ADM1266_GPIO_NR, &status)) set_bit(gpio_nr, bits); -- cgit v1.2.3 From a7232f68c43ca62f545049b7f5fbfc75137b843b Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Mon, 18 May 2026 17:52:27 -0700 Subject: hwmon: (pmbus/adm1266) reject short block-read responses in the GPIO accessors adm1266_gpio_get() and adm1266_gpio_get_multiple() both compose the pin-status word as pins_status = read_buf[0] + (read_buf[1] << 8); right after i2c_smbus_read_block_data(), guarding only against an error return. A well-behaved device returns 2 bytes for GPIO_STATUS/PDIO_STATUS, but the helper happily reports a 0- or 1-byte response too. If the device returns 0 bytes, both read_buf slots are uninitialized stack memory; if it returns 1 byte, read_buf[1] is. The composed value then flows through set_bit() into the caller's *bits in adm1266_gpio_get_multiple(), or into the return value of adm1266_gpio_get(), and ends up in userspace via gpiolib (sysfs and the char-dev ioctls). That leaks a few bits of kernel stack per request on any device whose firmware glitch, bus error, or hostile slave produces a short block-read response. Add the missing length check to both call sites and surface a short response as -EIO. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-3-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 3bf512df30cd..6f904a5a8ea6 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -176,6 +176,8 @@ static int adm1266_gpio_get(struct gpio_chip *chip, unsigned int offset) ret = i2c_smbus_read_block_data(data->client, pmbus_cmd, read_buf); if (ret < 0) return ret; + if (ret < 2) + return -EIO; pins_status = read_buf[0] + (read_buf[1] << 8); if (offset < ADM1266_GPIO_NR) @@ -196,6 +198,8 @@ static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask ret = i2c_smbus_read_block_data(data->client, ADM1266_GPIO_STATUS, read_buf); if (ret < 0) return ret; + if (ret < 2) + return -EIO; status = read_buf[0] + (read_buf[1] << 8); @@ -208,6 +212,8 @@ static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, read_buf); if (ret < 0) return ret; + if (ret < 2) + return -EIO; status = read_buf[0] + (read_buf[1] << 8); -- cgit v1.2.3 From 491403b9b76cf66abd81301c5901aa4a4549f1e8 Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Mon, 18 May 2026 17:52:28 -0700 Subject: hwmon: (pmbus/adm1266) register the gpio_chip after pmbus_do_probe() adm1266_probe() calls adm1266_config_gpio() -- which goes on to devm_gpiochip_add_data() and exposes the gpio_chip callbacks to gpiolib -- before pmbus_do_probe() has initialised the per-client PMBus state (notably the pmbus_lock mutex the core hands out via pmbus_get_data()). That ordering is already a latent hazard: any GPIO access that lands between adm1266_config_gpio() and the end of pmbus_do_probe() (for example a sysfs read from a user space agent that opens the gpiochip the instant gpiolib advertises it) races pmbus_do_probe()'s own device accesses with no serialisation. Move adm1266_config_gpio() down past pmbus_do_probe() so the chip isn't reachable from userspace until the PMBus state it depends on is fully initialised. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-4-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 6f904a5a8ea6..c2ac5d228b7d 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -473,10 +473,6 @@ static int adm1266_probe(struct i2c_client *client) crc8_populate_msb(pmbus_crc_table, 0x7); mutex_init(&data->buf_mutex); - ret = adm1266_config_gpio(data); - if (ret < 0) - return ret; - ret = adm1266_set_rtc(data); if (ret < 0) return ret; @@ -489,6 +485,10 @@ static int adm1266_probe(struct i2c_client *client) if (ret) return ret; + ret = adm1266_config_gpio(data); + if (ret < 0) + return ret; + adm1266_init_debugfs(data); return 0; -- cgit v1.2.3 From 6af713af91d5c34ec049eb3cc2c5b3f5eba953b8 Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Mon, 18 May 2026 17:52:29 -0700 Subject: hwmon: (pmbus/adm1266) register the nvmem device after pmbus_do_probe() adm1266_probe() calls adm1266_config_nvmem() -- which goes on to devm_nvmem_register() and exposes adm1266_nvmem_read() to userspace -- before pmbus_do_probe() has initialised the per-client PMBus state. Same latent hazard as the gpio_chip one fixed in the previous patch: once the nvmem device is registered, gpiolib's nvmem char-dev / sysfs interface is reachable, and any concurrent read triggers adm1266_nvmem_read() -> adm1266_nvmem_read_blackbox(), which issues PMBus traffic that races pmbus_do_probe()'s own device accesses with no serialisation. Move adm1266_config_nvmem() down past pmbus_do_probe() so the nvmem device isn't reachable from userspace until the PMBus state the nvmem accessors depend on is fully initialised. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-5-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index c2ac5d228b7d..3e8f2619cb9b 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -477,14 +477,14 @@ static int adm1266_probe(struct i2c_client *client) if (ret < 0) return ret; - ret = adm1266_config_nvmem(data); - if (ret < 0) - return ret; - ret = pmbus_do_probe(client, &data->info); if (ret) return ret; + ret = adm1266_config_nvmem(data); + if (ret < 0) + return ret; + ret = adm1266_config_gpio(data); if (ret < 0) return ret; -- cgit v1.2.3 From bab8c6fb5af8df7e753d196c1262cb78e92ca872 Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Mon, 18 May 2026 17:52:30 -0700 Subject: hwmon: (pmbus/adm1266) serialize GPIO PMBus accesses with pmbus_lock adm1266_gpio_get(), adm1266_gpio_get_multiple(), and adm1266_gpio_dbg_show() all issue PMBus reads against the device but none of them take pmbus_lock. The pmbus_core framework holds pmbus_lock around its own multi-transaction sequences (notably the "set PAGE, then read paged register" pattern used by hwmon attributes), so an unlocked GPIO accessor can land between a PAGE write and the subsequent paged read in another thread and corrupt either side's view of the device state machine. Take pmbus_lock at the top of each of the three accessors via the scope-based guard(). The lock is uncontended in the common case and adds only a single mutex round-trip per call. Fixes: d98dfad35c38 ("hwmon: (pmbus/adm1266) Add support for GPIOs") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Reviewed-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-6-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 3e8f2619cb9b..0eef58dd69a6 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -173,6 +173,8 @@ static int adm1266_gpio_get(struct gpio_chip *chip, unsigned int offset) else pmbus_cmd = ADM1266_PDIO_STATUS; + guard(pmbus_lock)(data->client); + ret = i2c_smbus_read_block_data(data->client, pmbus_cmd, read_buf); if (ret < 0) return ret; @@ -195,6 +197,8 @@ static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask unsigned int gpio_nr; int ret; + guard(pmbus_lock)(data->client); + ret = i2c_smbus_read_block_data(data->client, ADM1266_GPIO_STATUS, read_buf); if (ret < 0) return ret; @@ -236,6 +240,8 @@ static void adm1266_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) int ret; int i; + guard(pmbus_lock)(data->client); + for (i = 0; i < ADM1266_GPIO_NR; i++) { write_cmd = adm1266_gpio_mapping[i][1]; ret = adm1266_pmbus_block_xfer(data, ADM1266_GPIO_CONFIG, 1, &write_cmd, read_buf); -- cgit v1.2.3 From 9f1dd8f9491eb840cbea7ffdf4cad031e25f8ae0 Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Mon, 18 May 2026 17:52:31 -0700 Subject: hwmon: (pmbus/adm1266) serialize NVMEM blackbox read with pmbus_lock adm1266_nvmem_read() is the reg_read callback the NVMEM core invokes when userspace reads /sys/bus/nvmem/devices/.../nvmem on this chip. On the first byte of every read it does a memset of data->dev_mem, walks the device blackbox through adm1266_nvmem_read_blackbox() (which issues a chain of PMBus block transactions), and then memcpys the refreshed buffer out to userspace. None of that runs under pmbus_lock today. Two consequences: - The PMBus traffic the refresh issues is not serialised against pmbus_core's own multi-step PAGE+register sequences. A paged hwmon attribute read from another thread can land between a PAGE write and the paged read in either direction and corrupt one side's view of the device state machine. - The NVMEM core does not serialise concurrent reg_read calls, so two userspace readers racing at offset 0 can interleave the memset of data->dev_mem with another reader's adm1266_nvmem_read_blackbox() refill or memcpy out, returning torn data to userspace. Take pmbus_lock at the top of adm1266_nvmem_read() via the scope-based guard(). Patch 5 of this series moves adm1266_config_nvmem() past pmbus_do_probe() so the lock is guaranteed to be live before the callback is reachable from userspace. Fixes: 15609d189302 ("hwmon: (pmbus/adm1266) read blackbox") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-7-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 0eef58dd69a6..5ddca5701032 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -400,6 +400,8 @@ static int adm1266_nvmem_read(void *priv, unsigned int offset, void *val, size_t if (offset + bytes > data->nvmem_config.size) return -EINVAL; + guard(pmbus_lock)(data->client); + if (offset == 0) { memset(data->dev_mem, 0, data->nvmem_config.size); -- cgit v1.2.3 From 4e4af55aaca7f6d7673d5f9889ad0529db86a048 Mon Sep 17 00:00:00 2001 From: Abdurrahman Hussain Date: Mon, 18 May 2026 17:52:32 -0700 Subject: hwmon: (pmbus/adm1266) serialize sequencer_state debugfs read with pmbus_lock adm1266_state_read() backs the sequencer_state debugfs entry and issues an i2c_smbus_read_word_data(client, ADM1266_READ_STATE) against the device without taking pmbus_lock. pmbus_core holds pmbus_lock around its own multi-transaction sequences (notably the "set PAGE, then read paged register" pattern used by hwmon attributes), so an unlocked debugfs reader can land between a PAGE write and the subsequent paged read in another thread. READ_STATE itself is not paged, so it cannot corrupt PAGE in flight, but the same defensive serialisation that applies to the GPIO accessors applies here: any direct device access from outside pmbus_core should be ordered with respect to pmbus_core's own. Take pmbus_lock at the top of adm1266_state_read() via the scope-based guard(). Fixes: ed1ff457e187 ("hwmon: (pmbus/adm1266) add debugfs for states") Cc: stable@vger.kernel.org Signed-off-by: Abdurrahman Hussain Link: https://lore.kernel.org/r/20260518-adm1266-gpio-fixes-v3-8-e425e4f88139@nexthop.ai Signed-off-by: Guenter Roeck --- drivers/hwmon/pmbus/adm1266.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c index 5ddca5701032..6f6ad7b20e9a 100644 --- a/drivers/hwmon/pmbus/adm1266.c +++ b/drivers/hwmon/pmbus/adm1266.c @@ -335,6 +335,7 @@ static int adm1266_state_read(struct seq_file *s, void *pdata) struct i2c_client *client = to_i2c_client(dev); int ret; + guard(pmbus_lock)(client); ret = i2c_smbus_read_word_data(client, ADM1266_READ_STATE); if (ret < 0) return ret; -- cgit v1.2.3 From c68337442f03953237a94577beb468ab2662a851 Mon Sep 17 00:00:00 2001 From: Zhihao Cheng Date: Tue, 19 May 2026 17:18:05 +0800 Subject: cifs: Fix busy dentry used after unmounting Since commit 340cea84f691c ("cifs: open files should not hold ref on superblock"), cifs file only holds the dentry ref_cnt, the cifs file close work(cfile->deferred) could be executed after unmounting, which will trigger a warning in generic_shutdown_super: BUG: Dentry 00000000a14a6845{i=c,n=file} still in use (1) [unmount of cifs cifs] The detailed processs is: process A process B kworker fd = open(PATH) vfs_open file->__f_path = *path // dentry->d_lockref.count = 1 cifs_open cifs_new_fileinfo cfile->dentry = dget(dentry) // dentry->d_lockref.count = 2 close(fd) __fput cifs_close queue_delayed_work(deferredclose_wq, cfile->deferred) dput(dentry) // dentry->d_lockref.count = 1 smb2_deferred_work_close _cifsFileInfo_put list_del(&cifs_file->flist) umount cleanup_mnt deactivate_super cifs_kill_sb cifs_close_all_deferred_files_sb cifs_close_all_deferred_files // cannot find cfile, skip _cifsFileInfo_put kill_anon_super generic_shutdown_super shrink_dcache_for_umount umount_check WARN ! // dentry->d_lockref.count = 1 cifsFileInfo_put_final dput(cifs_file->dentry) // dentry->d_lockref.count = 0 Fix it by flushing 'deferredclose_wq' before calling kill_anon_super. Fetch a reproducer in https://bugzilla.kernel.org/show_bug.cgi?id=221548. Fixes: 340cea84f691c ("cifs: open files should not hold ref on superblock") Cc: stable@vger.kernel.org Reviewed-by: Shyam Prasad N Signed-off-by: Zhihao Cheng Signed-off-by: Steve French --- fs/smb/client/cifsfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/smb/client/cifsfs.c b/fs/smb/client/cifsfs.c index 9f76b0347fa9..06ebad58be0e 100644 --- a/fs/smb/client/cifsfs.c +++ b/fs/smb/client/cifsfs.c @@ -306,6 +306,8 @@ static void cifs_kill_sb(struct super_block *sb) /* Wait for all pending oplock breaks to complete */ flush_workqueue(cifsoplockd_wq); + /* Wait for all opened files to release */ + flush_workqueue(deferredclose_wq); /* finally release root dentry */ dput(cifs_sb->root); -- cgit v1.2.3 From fbc15231181669b51c0103fd74c9c2ac2756ab56 Mon Sep 17 00:00:00 2001 From: "Alexander A. Klimov" Date: Wed, 20 May 2026 20:03:58 +0200 Subject: smb: smbdirect: divide, not multiply, milliseconds by 1000 Unless smbdirect_connection_legacy_debug_proc_show() wants to debug-log keep_alive_interval as microseconds, a magnitude higher precision than available by the way, keepalive_interval_msec should not be multiplied by 1000. Fixes: cc55f65dd352 ("smb: client: make use of common smbdirect_socket_parameters") Reviewed-by: Stefan Metzmacher Signed-off-by: Alexander A. Klimov Signed-off-by: Steve French --- fs/smb/smbdirect/debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/smb/smbdirect/debug.c b/fs/smb/smbdirect/debug.c index 05ba7c8d165e..3445843445bf 100644 --- a/fs/smb/smbdirect/debug.c +++ b/fs/smb/smbdirect/debug.c @@ -40,7 +40,7 @@ void smbdirect_connection_legacy_debug_proc_show(struct smbdirect_socket *sc, seq_puts(m, "\n"); seq_printf(m, "Conn keep_alive_interval: %u ", - sp->keepalive_interval_msec * 1000); + sp->keepalive_interval_msec / 1000); seq_printf(m, "max_readwrite_size: %u rdma_readwrite_threshold: %u", sp->max_read_write_size, rdma_readwrite_threshold); -- cgit v1.2.3 From dbc81608e3a653dea6cf403f20cae35468b8ab9c Mon Sep 17 00:00:00 2001 From: Zijing Yin Date: Tue, 19 May 2026 10:26:33 -0700 Subject: phonet/pep: disable BH around forwarded sk_receive_skb() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The networking receive path is usually run from softirq context, but protocols that take the socket lock may have packets stored in the backlog and processed later from process context. In that case release_sock() -> __release_sock() drops the slock with spin_unlock_bh() and then calls sk->sk_backlog_rcv() with bottom halves enabled. Typical sk_backlog_rcv handlers process the socket whose backlog is being drained, so the BH state at entry is irrelevant for the slocks they touch. pep_do_rcv() is different: when the inbound skb targets an existing PEP pipe, it forwards the skb to a different *child* socket via sk_receive_skb(). That helper takes the child slock with bh_lock_sock_nested(), which is just spin_lock_nested() and assumes BH is already off. The same child slock therefore ends up acquired with BH on (process path) and with BH off (softirq path): process context softirq context --------------- --------------- release_sock(listener) __netif_receive_skb() __release_sock() phonet_rcv() spin_unlock_bh() __sk_receive_skb(listener) [BH now ENABLED] [BH already disabled] sk_backlog_rcv: sk_backlog_rcv: pep_do_rcv() pep_do_rcv() sk_receive_skb(child) sk_receive_skb(child) bh_lock_sock_nested(child) bh_lock_sock_nested(child) => SOFTIRQ-ON-W => IN-SOFTIRQ-W Lockdep flags this as inconsistent lock state, and it can become a real self-deadlock if a softirq on the same CPU tries to receive to the same child socket while its slock is held in the BH-enabled path: WARNING: inconsistent lock state inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. (slock-AF_PHONET/1){+.?.}-{3:3}, at: __sk_receive_skb+0x1cf/0x900 __sk_receive_skb net/core/sock.c:563 sk_receive_skb include/net/sock.h:2022 [inline] pep_do_rcv net/phonet/pep.c:675 sk_backlog_rcv include/net/sock.h:1190 __release_sock net/core/sock.c:3216 release_sock net/core/sock.c:3815 pep_sock_accept net/phonet/pep.c:879 Wrap the forwarded sk_receive_skb() in local_bh_disable() / local_bh_enable() so the child slock is always acquired with BH off. local_bh_disable() nests safely on the softirq path. Discovered via in-house syzkaller fuzzing; the same root cause also on the linux-6.1.y syzbot dashboard as extid 44f0626dd6284f02663c. Reproduced under KASAN + LOCKDEP + PROVE_LOCKING, reproducer: https://pastebin.com/A3t8xzCR Fixes: 9641458d3ec4 ("Phonet: Pipe End Point for Phonet Pipes protocol") Link: https://syzkaller.appspot.com/bug?extid=44f0626dd6284f02663c Cc: stable@vger.kernel.org Signed-off-by: Zijing Yin Acked-by: Rémi Denis-Courmont Reported-by: syzbot+9f4a135646b66c509935@syzkaller.appspotmail.com Reviewed-by: Eric Dumazet Link: https://patch.msgid.link/20260519172635.86304-1-yzjaurora@gmail.com Signed-off-by: Jakub Kicinski --- net/phonet/pep.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/net/phonet/pep.c b/net/phonet/pep.c index 4dbf0914df7d..706927139393 100644 --- a/net/phonet/pep.c +++ b/net/phonet/pep.c @@ -671,8 +671,23 @@ static int pep_do_rcv(struct sock *sk, struct sk_buff *skb) /* Look for an existing pipe handle */ sknode = pep_find_pipe(&pn->hlist, &dst, pipe_handle); - if (sknode) - return sk_receive_skb(sknode, skb, 1); + if (sknode) { + int rc; + + /* pep_do_rcv() runs from two contexts: from softirq via + * phonet_rcv() -> __sk_receive_skb() with BH disabled, + * and from process context via + * release_sock() -> __release_sock(), which drops + * the listener slock with spin_unlock_bh() before draining + * the backlog. The child pipe slock is taken below via + * bh_lock_sock_nested(), which does not itself disable BH, so + * disable BH here to keep both acquire contexts consistent. + */ + local_bh_disable(); + rc = sk_receive_skb(sknode, skb, 1); + local_bh_enable(); + return rc; + } switch (hdr->message_id) { case PNS_PEP_CONNECT_REQ: -- cgit v1.2.3 From 92cc6708f4a2ce15433b8355f363d446429ba88c Mon Sep 17 00:00:00 2001 From: "Matthieu Baerts (NGI0)" Date: Wed, 20 May 2026 11:34:43 +1000 Subject: selftests: rds: config: disable modules The run.sh script explicitly checks that CONFIG_MODULES is disabled. By default, this config option is enabled. Explicitly disable it to be able to run the RDS tests. Note that writing '# CONFIG_(...) is not set' is usually recommended to disable an option in the .config, but it looks like selftests usually set 'CONFIG_(...)=n', which looks clearer. Fixes: 0f5d68004780 ("selftests: rds: add tools/testing/selftests/net/rds/config") Signed-off-by: Matthieu Baerts (NGI0) Reviewed-by: Allison Henderson Link: https://patch.msgid.link/20260520-net-rds-config-modules-v1-1-2100df02fe9a@kernel.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/rds/config | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/net/rds/config b/tools/testing/selftests/net/rds/config index 97db7ecb892a..3d62d0c750a8 100644 --- a/tools/testing/selftests/net/rds/config +++ b/tools/testing/selftests/net/rds/config @@ -1,3 +1,4 @@ +CONFIG_MODULES=n CONFIG_NET_NS=y CONFIG_NET_SCH_NETEM=y CONFIG_RDS=y -- cgit v1.2.3 From 1341db322417266fb5845df81d28305b83a37324 Mon Sep 17 00:00:00 2001 From: Yuho Choi Date: Tue, 19 May 2026 23:03:28 -0400 Subject: ipv6: route: Unregister netdevice notifier on BPF init failure ip6_route_init() registers ip6_route_dev_notifier before registering the IPv6 route BPF iterator target. If bpf_iter_register() fails after the notifier has been registered, the error path currently jumps to out_register_late_subsys and unwinds the RTNL handlers and pernet route state without removing the notifier from the netdevice notifier chain. This leaves ip6_route_dev_notify() callable after the IPv6 route state it uses has been torn down. Add a separate unwind label for the BPF iterator failure path and unregister the netdevice notifier before continuing with the existing cleanup. Fixes: 138d0be35b14 ("net: bpf: Add netlink and ipv6_route bpf_iter targets") Signed-off-by: Yuho Choi Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260520030329.1061183-1-dbgh9129@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv6/route.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index e3d355d1fbd6..b106e5fef9cb 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -6933,7 +6933,7 @@ int __init ip6_route_init(void) #if defined(CONFIG_BPF_SYSCALL) && defined(CONFIG_PROC_FS) ret = bpf_iter_register(); if (ret) - goto out_register_late_subsys; + goto out_register_notifier; #endif for_each_possible_cpu(cpu) { @@ -6946,6 +6946,10 @@ int __init ip6_route_init(void) out: return ret; +#if defined(CONFIG_BPF_SYSCALL) && defined(CONFIG_PROC_FS) +out_register_notifier: + unregister_netdevice_notifier(&ip6_route_dev_notifier); +#endif out_register_late_subsys: rtnl_unregister_all(PF_INET6); unregister_pernet_subsys(&ip6_route_net_late_ops); -- cgit v1.2.3 From dfc077043351a81887d1e4c9ac244e9243f3cbf2 Mon Sep 17 00:00:00 2001 From: Nimrod Oren Date: Wed, 20 May 2026 18:39:28 +0300 Subject: selftests: net: Fix checksums in xdp_native Data adjustment cases failed with "Data exchange failed" when using IPv4 because the program did not update the IP and UDP checksums in the IPv4 branch. The issue was masked when both IPv4 and IPv6 were configured, since the test harness prefers IPv6. While here, generalize csum_fold_helper() to fold twice so it works for any 32-bit input. Fixes: 0b65cfcef9c5 ("selftests: drv-net: Test tail-adjustment support") Reviewed-by: Carolina Jubran Reviewed-by: Dragos Tatulea Signed-off-by: Nimrod Oren Link: https://patch.msgid.link/20260520153928.3371765-1-noren@nvidia.com Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/lib/xdp_native.bpf.c | 55 +++++++++++++----------- 1 file changed, 30 insertions(+), 25 deletions(-) diff --git a/tools/testing/selftests/net/lib/xdp_native.bpf.c b/tools/testing/selftests/net/lib/xdp_native.bpf.c index 64f05229ab24..ded3f896e622 100644 --- a/tools/testing/selftests/net/lib/xdp_native.bpf.c +++ b/tools/testing/selftests/net/lib/xdp_native.bpf.c @@ -268,6 +268,17 @@ static int xdp_mode_tx_handler(struct xdp_md *ctx, __u16 port) return XDP_PASS; } +static __always_inline __u16 csum_fold_helper(__u32 csum) +{ + csum = (csum & 0xffff) + (csum >> 16); + return ~((csum & 0xffff) + (csum >> 16)); +} + +static __always_inline __u16 csum_fold_udp_helper(__u32 csum) +{ + return csum_fold_helper(csum) ? : 0xffff; +} + static void *update_pkt(struct xdp_md *ctx, __s16 offset, __u32 *udp_csum) { void *data_end = (void *)(long)ctx->data_end; @@ -281,21 +292,22 @@ static void *update_pkt(struct xdp_md *ctx, __s16 offset, __u32 *udp_csum) if (eth->h_proto == bpf_htons(ETH_P_IP)) { struct iphdr *iph = data + sizeof(*eth); - __u16 total_len; if (iph + 1 > (struct iphdr *)data_end) return NULL; - iph->tot_len = bpf_htons(bpf_ntohs(iph->tot_len) + offset); - udph = (void *)eth + sizeof(*iph) + sizeof(*eth); if (!udph || udph + 1 > (struct udphdr *)data_end) return NULL; - len_new = bpf_htons(bpf_ntohs(udph->len) + offset); + len = iph->tot_len; + len_new = bpf_htons(bpf_ntohs(len) + offset); + iph->tot_len = len_new; + iph->check = csum_fold_helper( + bpf_csum_diff(&len, sizeof(len), &len_new, + sizeof(len_new), ~((__u32)iph->check))); } else if (eth->h_proto == bpf_htons(ETH_P_IPV6)) { struct ipv6hdr *ipv6h = data + sizeof(*eth); - __u16 payload_len; if (ipv6h + 1 > (struct ipv6hdr *)data_end) return NULL; @@ -304,33 +316,27 @@ static void *update_pkt(struct xdp_md *ctx, __s16 offset, __u32 *udp_csum) if (!udph || udph + 1 > (struct udphdr *)data_end) return NULL; - *udp_csum = ~((__u32)udph->check); - len = ipv6h->payload_len; len_new = bpf_htons(bpf_ntohs(len) + offset); ipv6h->payload_len = len_new; - - *udp_csum = bpf_csum_diff(&len, sizeof(len), &len_new, - sizeof(len_new), *udp_csum); - - len = udph->len; - len_new = bpf_htons(bpf_ntohs(udph->len) + offset); - *udp_csum = bpf_csum_diff(&len, sizeof(len), &len_new, - sizeof(len_new), *udp_csum); } else { return NULL; } + len = udph->len; + len_new = bpf_htons(bpf_ntohs(len) + offset); + + *udp_csum = ~((__u32)udph->check); + *udp_csum = bpf_csum_diff(&len, sizeof(len), &len_new, + sizeof(len_new), *udp_csum); + *udp_csum = bpf_csum_diff(&len, sizeof(len), &len_new, + sizeof(len_new), *udp_csum); + udph->len = len_new; return udph; } -static __u16 csum_fold_helper(__u32 csum) -{ - return ~((csum & 0xffff) + (csum >> 16)) ? : 0xffff; -} - static int xdp_adjst_tail_shrnk_data(struct xdp_md *ctx, __u16 offset, unsigned long hdr_len) { @@ -359,7 +365,7 @@ static int xdp_adjst_tail_shrnk_data(struct xdp_md *ctx, __u16 offset, return -1; udp_csum = bpf_csum_diff((__be32 *)tmp_buff, offset, 0, 0, udp_csum); - udph->check = (__u16)csum_fold_helper(udp_csum); + udph->check = (__u16)csum_fold_udp_helper(udp_csum); if (bpf_xdp_adjust_tail(ctx, 0 - offset) < 0) return -1; @@ -403,7 +409,7 @@ static int xdp_adjst_tail_grow_data(struct xdp_md *ctx, __u16 offset) return -1; udp_csum = bpf_csum_diff(0, 0, (__be32 *)tmp_buff, offset, udp_csum); - udph->check = (__u16)csum_fold_helper(udp_csum); + udph->check = (__u16)csum_fold_udp_helper(udp_csum); buff_len = bpf_xdp_get_buff_len(ctx); @@ -484,8 +490,7 @@ static int xdp_adjst_head_shrnk_data(struct xdp_md *ctx, __u64 hdr_len, return -1; udp_csum = bpf_csum_diff((__be32 *)tmp_buff, offset, 0, 0, udp_csum); - - udph->check = (__u16)csum_fold_helper(udp_csum); + udph->check = (__u16)csum_fold_udp_helper(udp_csum); if (bpf_xdp_load_bytes(ctx, 0, tmp_buff, MAX_ADJST_OFFSET) < 0) return -1; @@ -542,7 +547,7 @@ static int xdp_adjst_head_grow_data(struct xdp_md *ctx, __u64 hdr_len, return -1; udp_csum = bpf_csum_diff(0, 0, (__be32 *)data_buff, offset, udp_csum); - udph->check = (__u16)csum_fold_helper(udp_csum); + udph->check = (__u16)csum_fold_udp_helper(udp_csum); if (hdr_len > MAX_ADJST_OFFSET || hdr_len == 0) return -1; -- cgit v1.2.3 From 099258bde1c94d8c8d0988b543436192f9d7438b Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Wed, 20 May 2026 17:41:51 -0700 Subject: MAINTAINERS: add missing entry for Bluetooth include files We X-out net/bluetooth/ from "NETWORKING [GENERAL]" so that only the dedicated list is CCed on patches, and networking gets them once already processed by Luiz. We missed include/net/bluetooth. Link: https://patch.msgid.link/20260521004151.625049-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 6aa3fe2ee1bb..e225c0d42775 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18632,6 +18632,7 @@ F: tools/testing/selftests/net/ X: Documentation/networking/mac80211-injection.rst X: Documentation/networking/mac80211_hwsim/ X: Documentation/networking/regulatory.rst +X: include/net/bluetooth/ X: include/net/cfg80211.h X: include/net/ieee80211_radiotap.h X: include/net/iw_handler.h -- cgit v1.2.3 From 85fac50b58ca0e96dc8bfa649705cb901400877f Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Thu, 21 May 2026 15:49:29 +0200 Subject: MAINTAINERS: Update address for Michael Grzeschik Since I am moving from Pengutronix update my email address for the ARCNET subsystems to point to my kernel.org address. Also update .mailmap. Signed-off-by: Michael Grzeschik Acked-by: Jakub Kicinski Acked-by: Markus Schneider-Pargmann Link: https://patch.msgid.link/20260521-maintainer-v1-1-29b5e106682d@kernel.org Signed-off-by: Jakub Kicinski --- .mailmap | 2 ++ MAINTAINERS | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/.mailmap b/.mailmap index eec4a740f7ca..9eaba3570cff 100644 --- a/.mailmap +++ b/.mailmap @@ -584,6 +584,8 @@ Mayuresh Janorkar Md Sadre Alam Miaoqing Pan Michael Buesch +Michal Grzeschik +Michal Grzeschik Michael Riesch Michal Simek Michel Dänzer diff --git a/MAINTAINERS b/MAINTAINERS index e225c0d42775..455a9bf56b65 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2064,7 +2064,7 @@ F: Documentation/devicetree/bindings/display/snps,arcpgu.txt F: drivers/gpu/drm/tiny/arcpgu.c ARCNET NETWORK LAYER -M: Michael Grzeschik +M: Michael Grzeschik L: netdev@vger.kernel.org S: Maintained F: drivers/net/arcnet/ -- cgit v1.2.3 From 85686c72966c5ee637893f124ddb31a1cace7bee Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 19 May 2026 18:03:44 -0700 Subject: nvme-pci: fix dma_vecs leak on p2p memory We don't unmap P2P memory, so we don't need to track it. The dma_vec allocation was getting leaked on the completion. Fixes: b8b7570a7ec87 ("nvme-pci: fix dma unmapping when using PRPs and not using the IOVA mapping") Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/host/pci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 139a10cd687f..f423f1718439 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -966,7 +966,8 @@ static bool nvme_pci_prp_save_mapping(struct request *req, { struct nvme_iod *iod = blk_mq_rq_to_pdu(req); - if (dma_use_iova(&iod->dma_state) || !dma_need_unmap(dma_dev)) + if (dma_use_iova(&iod->dma_state) || !dma_need_unmap(dma_dev) || + (iod->flags & IOD_DATA_P2P)) return true; if (!iod->nr_dma_vecs) { -- cgit v1.2.3 From 1bf86336e4b6cf40873fda47a7fe191446864937 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 19 May 2026 13:01:57 -0700 Subject: nvme-pci: fix dma mapping leak on data setup error We're leaking the initial DMA mapping during iteration if we fail to allocate the tracking descriptor for both PRP and SGL. Unmap the iterator directly; we can't use the existing unmap helper because it depends on the tracking descriptor being successfully allocated, so a new one for an in-use iterator is provided. The mappings were also leaking when the driver detects an invalid bio_vec when mapping PRPs, so fix that too. Fixes: b8b7570a7ec87 ("nvme-pci: fix dma unmapping when using PRPs and not using the IOVA mapping") Fixes: 7ce3c1dd78fca ("nvme-pci: convert the data mapping to blk_rq_dma_map") Reviewed-by: Christoph Hellwig Signed-off-by: Keith Busch --- drivers/nvme/host/pci.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index f423f1718439..b5f846200678 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -997,6 +997,23 @@ static bool nvme_pci_prp_iter_next(struct request *req, struct device *dma_dev, return nvme_pci_prp_save_mapping(req, dma_dev, iter); } +static void nvme_unmap_iter(struct request *req, struct blk_dma_iter *iter, + struct dma_iova_state *state) +{ + struct nvme_queue *nvmeq = req->mq_hctx->driver_data; + struct device *dev = nvmeq->dev->dev; + + if (!blk_rq_dma_unmap(req, dev, state, iter->len, iter->p2pdma.map)) { + unsigned int attrs = 0; + + if (iter->p2pdma.map == PCI_P2PDMA_MAP_THRU_HOST_BRIDGE) + attrs |= DMA_ATTR_MMIO; + + dma_unmap_phys(dev, iter->addr, iter->len, rq_dma_dir(req), + attrs); + } +} + static blk_status_t nvme_pci_setup_data_prp(struct request *req, struct blk_dma_iter *iter) { @@ -1007,8 +1024,10 @@ static blk_status_t nvme_pci_setup_data_prp(struct request *req, unsigned int prp_len, i; __le64 *prp_list; - if (!nvme_pci_prp_save_mapping(req, nvmeq->dev->dev, iter)) + if (!nvme_pci_prp_save_mapping(req, nvmeq->dev->dev, iter)) { + nvme_unmap_iter(req, iter, &iod->dma_state); return iter->status; + } /* * PRP1 always points to the start of the DMA transfers. @@ -1113,6 +1132,7 @@ bad_sgl: dev_err_once(nvmeq->dev->dev, "Incorrectly formed request for payload:%d nents:%d\n", blk_rq_payload_bytes(req), blk_rq_nr_phys_segments(req)); + nvme_unmap_data(req); return BLK_STS_IOERR; } @@ -1156,8 +1176,11 @@ static blk_status_t nvme_pci_setup_data_sgl(struct request *req, sg_list = dma_pool_alloc(nvme_dma_pool(nvmeq, iod), GFP_ATOMIC, &sgl_dma); - if (!sg_list) + if (!sg_list) { + nvme_unmap_iter(req, iter, &iod->dma_state); return BLK_STS_RESOURCE; + } + iod->descriptors[iod->nr_descriptors++] = sg_list; do { @@ -1314,8 +1337,10 @@ static blk_status_t nvme_pci_setup_meta_iter(struct request *req) sg_list = dma_pool_alloc(nvmeq->descriptor_pools.small, GFP_ATOMIC, &sgl_dma); - if (!sg_list) + if (!sg_list) { + nvme_unmap_iter(req, &iter, &iod->meta_dma_state); return BLK_STS_RESOURCE; + } iod->meta_descriptor = sg_list; iod->meta_dma = sgl_dma; -- cgit v1.2.3 From c5d93b2c40355e999715262a824965aac025a427 Mon Sep 17 00:00:00 2001 From: Abdun Nihaal Date: Tue, 19 May 2026 11:57:39 +0530 Subject: net: wwan: iosm: fix potential memory leaks in ipc_imem_init() The memory allocated in ipc_protocol_init() is not freed on the error paths that follow in ipc_imem_init(). Fix that by calling the corresponding release function ipc_protocol_deinit() in the error path. Fixes: 3670970dd8c6 ("net: iosm: shared memory IPC interface") Cc: stable@vger.kernel.org Signed-off-by: Abdun Nihaal Link: https://patch.msgid.link/20260519062815.55545-1-nihaal@cse.iitm.ac.in Signed-off-by: Jakub Kicinski --- drivers/net/wwan/iosm/iosm_ipc_imem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wwan/iosm/iosm_ipc_imem.c b/drivers/net/wwan/iosm/iosm_ipc_imem.c index 1b7bc7d63a2e..4405c8531888 100644 --- a/drivers/net/wwan/iosm/iosm_ipc_imem.c +++ b/drivers/net/wwan/iosm/iosm_ipc_imem.c @@ -1425,6 +1425,8 @@ imem_config_fail: protocol_init_fail: cancel_work_sync(&ipc_imem->run_state_worker); ipc_task_deinit(ipc_imem->ipc_task); + if (ipc_imem->ipc_protocol) + ipc_protocol_deinit(ipc_imem->ipc_protocol); ipc_task_init_fail: kfree(ipc_imem->ipc_task); ipc_task_fail: -- cgit v1.2.3 From c367b9082194d01cb38bdefac6e887ebf1ab017d Mon Sep 17 00:00:00 2001 From: Zhang Cen Date: Tue, 19 May 2026 18:46:47 +0800 Subject: netpoll: normalize skb->dev to the netpoll device __netpoll_send_skb() always transmits through np->dev and queues busy packets on np->dev->npinfo->txq, but it leaves skb->dev unchanged. Stacked callers such as DSA and macvlan can reach netpoll with skb->dev still naming the upper device while np->dev is the lower device that owns the netpoll state. If the skb has to be deferred, queue_process() later dequeues it from the lower device's txq but retries it through skb->dev. That can re-enter the upper ndo_start_xmit path on an already transformed skb, and if the upper device disappears before the lower txq drains the workqueue can dereference a stale skb->dev pointer. The buggy scenario involves two paths, with each column showing the order within that path: path A label: netpoll enqueue path path B label: upper-device teardown 1. Stacked xmit calls netpoll 1. Teardown unregisters the upper with lower np->dev and upper net_device while lower npinfo skb->dev. stays alive. 2. __netpoll_send_skb() uses 2. netdev_release() runs for the np->dev->npinfo as the txq upper net_device. owner. 3. Busy transmit queues the skb 3. The lower txq still owns the on that lower txq with upper deferred skb. skb->dev. 4. queue_process() drains the 4. queue_process() dereferences lower txq and reads skb->dev. that stale upper skb->dev. Normalize skb->dev to np->dev after loading np->dev from the netpoll instance, before either the direct transmit path or the fallback enqueue. This keeps the queued skb in the same device and txq domain as the netpoll state that owns it. KASAN report as below: KASAN slab-use-after-free in queue_process+0x7c/0x480 Workqueue: events queue_process The buggy address belongs to the object at ffff88810906c000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 168 bytes inside of freed 4096-byte region [ffff88810906c000, ffff88810906d000) Read of size 8 Call trace: dump_stack_lvl+0x73/0xb0 (?:?) print_report+0xd1/0x620 (?:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x215/0x420 (?:?) kasan_complete_mode_report_info+0x64/0x200 (?:?) kasan_report+0xf7/0x130 (?:?) queue_process+0x7c/0x480 (net/core/netpoll.c:88) kasan_check_range+0x10c/0x1c0 (?:?) __kasan_check_read+0x15/0x20 (?:?) process_one_work+0x8b7/0x1af0 (kernel/workqueue.c:3200) assign_work+0x170/0x3f0 (?:?) worker_thread+0x574/0xf10 (?:?) _raw_spin_unlock_irqrestore+0x4b/0x60 (?:?) trace_hardirqs_on+0x2a/0x180 (?:?) kthread+0x2fc/0x3f0 (?:?) ret_from_fork+0x58b/0x830 (?:?) __switch_to+0x58e/0xe90 (?:?) __switch_to_asm+0x39/0x70 (?:?) ret_from_fork_asm+0x1a/0x30 (?:?) Freed by task stack: kasan_save_stack+0x3d/0x60 (?:?) kasan_save_track+0x18/0x40 (?:?) kasan_save_free_info+0x3f/0x60 (?:?) __kasan_slab_free+0x48/0x70 (?:?) kfree+0x20e/0x4e0 (?:?) kvfree+0x31/0x40 (?:?) netdev_release+0x71/0x90 (net/core/net-sysfs.c:2227) device_release+0xd2/0x250 (?:?) kobject_put+0x181/0x4c0 (lib/kobject.c:730) netdev_run_todo+0x700/0x1000 (net/core/dev.c:11666) rtnl_dellink+0x396/0xc00 (net/core/rtnetlink.c:3558) rtnetlink_rcv_msg+0x740/0xc20 (net/core/rtnetlink.c:6897) netlink_rcv_skb+0x147/0x3a0 (?:?) rtnetlink_rcv+0x19/0x20 (net/core/rtnetlink.c:7021) netlink_unicast+0x4d1/0x830 (net/netlink/af_netlink.c:1327) netlink_sendmsg+0x840/0xe10 (net/netlink/af_netlink.c:1812) ____sys_sendmsg+0x8a7/0xb50 (?:?) ___sys_sendmsg+0x104/0x190 (?:?) __sys_sendmsg+0x135/0x1d0 (?:?) __x64_sys_sendmsg+0x7b/0xc0 (?:?) x64_sys_call+0x205c/0x2130 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Fixes: 5de4a473bda4 ("netpoll queue cleanup") Signed-off-by: Zhang Cen Link: https://patch.msgid.link/20260519104647.3517990-1-rollkingzzc@gmail.com Signed-off-by: Jakub Kicinski --- net/core/netpoll.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/netpoll.c b/net/core/netpoll.c index 84faace50ac2..3f4a17fa5713 100644 --- a/net/core/netpoll.c +++ b/net/core/netpoll.c @@ -319,6 +319,8 @@ static netdev_tx_t __netpoll_send_skb(struct netpoll *np, struct sk_buff *skb) lockdep_assert_irqs_disabled(); dev = np->dev; + /* npinfo->txq belongs to np->dev, so retries must stay bound to it. */ + skb->dev = dev; rcu_read_lock(); npinfo = rcu_dereference_bh(dev->npinfo); -- cgit v1.2.3 From 9eddc819f00b5b74bb4ac91396f80bd35f5f3561 Mon Sep 17 00:00:00 2001 From: Ratheesh Kannoth Date: Wed, 20 May 2026 10:00:36 +0530 Subject: octeontx2-af: npc: Fix allmulticast skip logic for LBK and SDP VFs When installing the allmulticast NPC rule, rvu_npc_install_allmulti_entry() should skip LBK and SDP VFs (only CGX PF/VF may add the entry). The code combined is_lbk_vf() and is_sdp_vf() with logical AND, which is never true for a single pcifunc, so the intended early return never ran. Use logical OR instead. Cc: Geetha sowjanya Fixes: ae703539f49d2 ("octeontx2-af: Cleanup loopback device checks") Signed-off-by: Ratheesh Kannoth Link: https://patch.msgid.link/20260520043036.1523798-1-rkannoth@marvell.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c index 3c814d157ab9..607d0cf1a778 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c @@ -990,7 +990,7 @@ void rvu_npc_install_allmulti_entry(struct rvu *rvu, u16 pcifunc, int nixlf, u16 vf_func; /* Only CGX PF/VF can add allmulticast entry */ - if (is_lbk_vf(rvu, pcifunc) && is_sdp_vf(rvu, pcifunc)) + if (is_lbk_vf(rvu, pcifunc) || is_sdp_vf(rvu, pcifunc)) return; blkaddr = rvu_get_blkaddr(rvu, BLKTYPE_NPC, 0); -- cgit v1.2.3 From b809d0409991b75a6cff846a5ac27c3062953f84 Mon Sep 17 00:00:00 2001 From: Aditya Garg Date: Tue, 19 May 2026 22:15:53 -0700 Subject: net: mana: validate rx_req_idx to prevent out-of-bounds array access In mana_hwc_rx_event_handler(), rx_req_idx is derived from sge->address in DMA-coherent memory. In Confidential VMs (SEV-SNP/TDX), this memory is shared unencrypted and HW can modify WQE contents at any time. No bounds check exists on rx_req_idx, which can lead to an out-of-bounds access into reqs[]. Add bounds check on rx_req_idx in mana_hwc_rx_event_handler() before using it to index the reqs[] array. Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Aditya Garg Reviewed-by: Haiyang Zhang Link: https://patch.msgid.link/20260520051553.857120-1-gargaditya@linux.microsoft.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/microsoft/mana/hw_channel.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/microsoft/mana/hw_channel.c b/drivers/net/ethernet/microsoft/mana/hw_channel.c index fd8b324d7fb6..e3c24d50dad0 100644 --- a/drivers/net/ethernet/microsoft/mana/hw_channel.c +++ b/drivers/net/ethernet/microsoft/mana/hw_channel.c @@ -265,6 +265,12 @@ static void mana_hwc_rx_event_handler(void *ctx, u32 gdma_rxq_id, rq_base_addr = hwc_rxq->msg_buf->mem_info.dma_handle; rx_req_idx = (sge->address - rq_base_addr) / hwc->max_req_msg_size; + if (rx_req_idx >= hwc_rxq->msg_buf->num_reqs) { + dev_err(hwc->dev, "HWC RX: wrong rx_req_idx=%llu, num_reqs=%u\n", + rx_req_idx, hwc_rxq->msg_buf->num_reqs); + return; + } + rx_req = &hwc_rxq->msg_buf->reqs[rx_req_idx]; resp = (struct gdma_resp_hdr *)rx_req->buf_va; -- cgit v1.2.3 From 2bccfb8476ca5f3548afbd623dc7a6980d4e77de Mon Sep 17 00:00:00 2001 From: Dawei Feng Date: Wed, 20 May 2026 15:03:23 +0800 Subject: qed: fix double free in qed_cxt_tables_alloc() If one of the later PF or VF CID bitmap allocations fails, qed_cid_map_alloc() jumps to cid_map_fail and frees the previously allocated CID bitmaps before returning an error. qed_cxt_tables_alloc() then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free() again. Fix this by setting each CID bitmap pointer to NULL after bitmap_free() to avoid double free. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc3. Runtime reproduction was not attempted because exercising the failing allocation path requires device-specific setup. Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Cc: stable@vger.kernel.org Signed-off-by: Zilin Guan Signed-off-by: Dawei Feng Link: https://patch.msgid.link/20260520070323.2762379-1-dawei.feng@seu.edu.cn Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c index 9861daa82d9e..b70262e70baf 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c +++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c @@ -1036,11 +1036,13 @@ static void qed_cid_map_free(struct qed_hwfn *p_hwfn) for (type = 0; type < MAX_CONN_TYPES; type++) { bitmap_free(p_mngr->acquired[type].cid_map); + p_mngr->acquired[type].cid_map = NULL; p_mngr->acquired[type].max_count = 0; p_mngr->acquired[type].start_cid = 0; for (vf = 0; vf < MAX_NUM_VFS; vf++) { bitmap_free(p_mngr->acquired_vf[type][vf].cid_map); + p_mngr->acquired_vf[type][vf].cid_map = NULL; p_mngr->acquired_vf[type][vf].max_count = 0; p_mngr->acquired_vf[type][vf].start_cid = 0; } -- cgit v1.2.3 From bddc09212c24934643bd44fc794748d2bbb3b6cd Mon Sep 17 00:00:00 2001 From: Weiming Shi Date: Wed, 20 May 2026 00:57:38 -0700 Subject: tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an uninitialised on-stack struct sockaddr_storage to userspace via ifr_hwaddr, but netif_get_mac_address() only writes sa_family and dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised. Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a macvtap chardev returns kernel .text and direct-map pointers, defeating KASLR. Initialise ss at declaration. Fixes: 3b23a32a6321 ("net: fix dev_ifsioc_locked() race condition") Reported-by: Xiang Mei Signed-off-by: Weiming Shi Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/20260520075736.3415676-3-bestswngs@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/tap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/tap.c b/drivers/net/tap.c index b8240737dc51..a590e07ce0a9 100644 --- a/drivers/net/tap.c +++ b/drivers/net/tap.c @@ -919,11 +919,11 @@ static long tap_ioctl(struct file *file, unsigned int cmd, struct tap_queue *q = file->private_data; struct tap_dev *tap; void __user *argp = (void __user *)arg; + struct sockaddr_storage ss = {}; struct ifreq __user *ifr = argp; unsigned int __user *up = argp; unsigned short u; int __user *sp = argp; - struct sockaddr_storage ss; int s; int ret; -- cgit v1.2.3 From e46e6bc97fb1f339730ff1ba74267fbf48e7a422 Mon Sep 17 00:00:00 2001 From: Justin Iurman Date: Wed, 20 May 2026 14:42:42 +0200 Subject: ipv6: ioam: refresh hdr pointer before ioam6_event() Reported by Sashiko: In ipv6_hop_ioam(), the hdr pointer is initialized to point into the skb's linear data buffer. Later, the code calls skb_ensure_writable(), which might reallocate the buffer: if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len)) goto drop; /* Trace pointer may have changed */ trace = (struct ioam6_trace_hdr *)(skb_network_header(skb) + optoff + sizeof(*hdr)); ioam6_fill_trace_data(skb, ns, trace, true); ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev), GFP_ATOMIC, (void *)trace, hdr->opt_len - 2); If the skb is cloned or lacks sufficient linear headroom, skb_ensure_writable() will invoke pskb_expand_head(), which reallocates the skb's data buffer and frees the old one, invalidating pointers to it. While the code recalculates the trace pointer immediately after the call to skb_ensure_writable(), it fails to recalculate the hdr pointer. This patch fixes the above by recalculating the hdr pointer before passing hdr->opt_len to ioam6_event(), so that we avoid any UaF. Fixes: f655c78d6225 ("net: exthdrs: ioam6: send trace event") Cc: stable@vger.kernel.org Signed-off-by: Justin Iurman Reviewed-by: Ido Schimmel Link: https://patch.msgid.link/20260520124242.32320-1-justin.iurman@gmail.com Signed-off-by: Jakub Kicinski --- net/ipv6/exthdrs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c index 47c5502a34a2..cf90f933ca1a 100644 --- a/net/ipv6/exthdrs.c +++ b/net/ipv6/exthdrs.c @@ -966,9 +966,9 @@ static bool ipv6_hop_ioam(struct sk_buff *skb, int optoff) if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len)) goto drop; - /* Trace pointer may have changed */ - trace = (struct ioam6_trace_hdr *)(skb_network_header(skb) - + optoff + sizeof(*hdr)); + /* Trace and hdr pointers may have changed */ + hdr = (struct ioam6_hdr *)(skb_network_header(skb) + optoff); + trace = (struct ioam6_trace_hdr *)((u8 *)hdr + sizeof(*hdr)); ioam6_fill_trace_data(skb, ns, trace, true); -- cgit v1.2.3 From 985d4a55e64e43bd86eeb896b81ceba453301989 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Wed, 20 May 2026 15:12:02 +0200 Subject: net: airoha: Disable GDM2 forwarding before configuring GDM2 loopback Hw design requires to disable GDM2 forwarding before configuring GDM2 loopback in airoha_set_gdm2_loopback routine. Fixes: 9cd451d414f6e ("net: airoha: Add loopback support for GDM2") Tested-by: Madhur Agrawal Signed-off-by: Lorenzo Bianconi Link: https://patch.msgid.link/20260520-airoha-disable-gdm2-fwd-v1-1-1eeea5dffc2f@kernel.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/airoha/airoha_eth.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c index d0c0c0ec8a80..cecd66251dba 100644 --- a/drivers/net/ethernet/airoha/airoha_eth.c +++ b/drivers/net/ethernet/airoha/airoha_eth.c @@ -1793,11 +1793,8 @@ static int airoha_set_gdm2_loopback(struct airoha_gdm_port *port) u32 val, pse_port, chan; int i, src_port; - /* Forward the traffic to the proper GDM port */ - pse_port = port->id == AIROHA_GDM3_IDX ? FE_PSE_PORT_GDM3 - : FE_PSE_PORT_GDM4; airoha_set_gdm_port_fwd_cfg(eth, REG_GDM_FWD_CFG(AIROHA_GDM2_IDX), - pse_port); + FE_PSE_PORT_DROP); airoha_fe_clear(eth, REG_GDM_FWD_CFG(AIROHA_GDM2_IDX), GDM_STRIP_CRC_MASK); @@ -1815,6 +1812,11 @@ static int airoha_set_gdm2_loopback(struct airoha_gdm_port *port) GDM_SHORT_LEN_MASK | GDM_LONG_LEN_MASK, FIELD_PREP(GDM_SHORT_LEN_MASK, 60) | FIELD_PREP(GDM_LONG_LEN_MASK, AIROHA_MAX_MTU)); + /* Forward the traffic to the proper GDM port */ + pse_port = port->id == AIROHA_GDM3_IDX ? FE_PSE_PORT_GDM3 + : FE_PSE_PORT_GDM4; + airoha_set_gdm_port_fwd_cfg(eth, REG_GDM_FWD_CFG(AIROHA_GDM2_IDX), + pse_port); /* Disable VIP and IFC for GDM2 */ airoha_fe_clear(eth, REG_FE_VIP_PORT_EN, BIT(AIROHA_GDM2_IDX)); -- cgit v1.2.3 From 3d4432d34c1992701289cbe12df9fd024f315998 Mon Sep 17 00:00:00 2001 From: "Nikhil P. Rao" Date: Wed, 20 May 2026 20:58:42 +0000 Subject: pds_core: ensure null-termination for firmware version strings The driver passes fw_version directly to devlink_info_version_stored_put() without ensuring null-termination. While current firmware null-terminates these strings, the driver should not rely on this behavior. Add explicit null-termination to prevent potential issues if firmware behavior changes. Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Nikhil P. Rao Link: https://patch.msgid.link/20260520205842.1486718-1-nikhil.rao@amd.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/amd/pds_core/devlink.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/amd/pds_core/devlink.c b/drivers/net/ethernet/amd/pds_core/devlink.c index b576be626a29..3f0e56b951bf 100644 --- a/drivers/net/ethernet/amd/pds_core/devlink.c +++ b/drivers/net/ethernet/amd/pds_core/devlink.c @@ -122,12 +122,14 @@ int pdsc_dl_info_get(struct devlink *dl, struct devlink_info_req *req, listlen = min(fw_list.num_fw_slots, ARRAY_SIZE(fw_list.fw_names)); for (i = 0; i < listlen; i++) { + char *fw_ver = fw_list.fw_names[i].fw_version; + if (i < ARRAY_SIZE(fw_slotnames)) strscpy(buf, fw_slotnames[i], sizeof(buf)); else snprintf(buf, sizeof(buf), "fw.slot_%d", i); - err = devlink_info_version_stored_put(req, buf, - fw_list.fw_names[i].fw_version); + fw_ver[sizeof(fw_list.fw_names[i].fw_version) - 1] = '\0'; + err = devlink_info_version_stored_put(req, buf, fw_ver); if (err) return err; } -- cgit v1.2.3 From 4db79a322db8c97f7b73b8a347395ef4d685eb40 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Wed, 20 May 2026 22:44:42 +0200 Subject: net: gro: don't merge zcopy skbs skb_gro_receive() can currently copy frags between the source and GRO skb, without checking the zerocopy status, and in particular the SKBFL_MANAGED_FRAG_REFS flag. When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference on the pages in shinfo->frags. Appending those frags to another skb's frags without fixing up the page refcount can lead to UAF. When either the last skb in the GRO chain (the one we would append frags to) or the source skb is zerocopy, don't merge the skbs. Fixes: 753f1ca4e1e5 ("net: introduce managed frags infrastructure") Reported-by: Huzaifa Sidhpurwala Signed-off-by: Sabrina Dubroca Reviewed-by: Willem de Bruijn Link: https://patch.msgid.link/c3b7f906bbfcbdfd7b4fa9d6c18a438870df85be.1779307748.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski --- net/core/gro.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/core/gro.c b/net/core/gro.c index 9f8960789b2c..a84753983467 100644 --- a/net/core/gro.c +++ b/net/core/gro.c @@ -109,6 +109,9 @@ int skb_gro_receive(struct sk_buff *p, struct sk_buff *skb) if (p->pp_recycle != skb->pp_recycle) return -ETOOMANYREFS; + if (skb_zcopy(p) || skb_zcopy(skb)) + return -ETOOMANYREFS; + if (unlikely(p->len + len >= netif_get_gro_max_size(p->dev, p) || NAPI_GRO_CB(skb)->flush)) return -E2BIG; -- cgit v1.2.3 From 3287e81292f49dca2f253113c458e8f3d4ea091b Mon Sep 17 00:00:00 2001 From: Ilya Maximets Date: Wed, 20 May 2026 19:22:37 +0200 Subject: tools: ynl: support listening on all nsids A new method ntf_listen_all_nsid() to enable listening on events from all namespaces. Useful for testing cross-namespace functionality. recv() replaced with recvmsg() to be able to receive NSID through the ancillary data. Signed-off-by: Ilya Maximets Link: https://patch.msgid.link/20260520172317.175168-4-i.maximets@ovn.org Signed-off-by: Jakub Kicinski --- tools/net/ynl/pyynl/lib/ynl.py | 37 ++++++++++++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 5 deletions(-) diff --git a/tools/net/ynl/pyynl/lib/ynl.py b/tools/net/ynl/pyynl/lib/ynl.py index f63c6f828735..010aac0c6c67 100644 --- a/tools/net/ynl/pyynl/lib/ynl.py +++ b/tools/net/ynl/pyynl/lib/ynl.py @@ -42,6 +42,7 @@ class Netlink: SOL_NETLINK = 270 NETLINK_ADD_MEMBERSHIP = 1 + NETLINK_LISTEN_ALL_NSID = 8 NETLINK_CAP_ACK = 10 NETLINK_EXT_ACK = 11 NETLINK_GET_STRICT_CHK = 12 @@ -680,6 +681,7 @@ class YnlFamily(SpecFamily): Notification API: ynl.ntf_subscribe(mcast_name) -- join a multicast group + ynl.ntf_listen_all_nsid() -- listen on all netns ynl.check_ntf() -- drain pending notifications ynl.poll_ntf(duration=None) -- yield notifications @@ -748,6 +750,23 @@ class YnlFamily(SpecFamily): self.sock.setsockopt(Netlink.SOL_NETLINK, Netlink.NETLINK_ADD_MEMBERSHIP, mcast_id) + def ntf_listen_all_nsid(self): + """Enable NETLINK_LISTEN_ALL_NSID to receive notifications from all + namespaces that have an nsid mapped in the current one.""" + self.sock.setsockopt(Netlink.SOL_NETLINK, + Netlink.NETLINK_LISTEN_ALL_NSID, 1) + + @staticmethod + def _decode_nsid(ancdata): + for cmsg_level, cmsg_type, cmsg_data in ancdata: + if (cmsg_level == Netlink.SOL_NETLINK and + cmsg_type == Netlink.NETLINK_LISTEN_ALL_NSID): + nsid = struct.unpack('i', cmsg_data)[0] + if nsid >= 0: + return nsid + return None + return None + def set_recv_dbg(self, enabled): self._recv_dbg = enabled @@ -1235,7 +1254,7 @@ class YnlFamily(SpecFamily): f" when parsing '{attr_spec['name']}'") return raw - def handle_ntf(self, decoded): + def handle_ntf(self, decoded, nsid=None): msg = {} if self.include_raw: msg['raw'] = decoded @@ -1246,15 +1265,22 @@ class YnlFamily(SpecFamily): msg['name'] = op['name'] msg['msg'] = attrs + if nsid is not None: + msg['nsid'] = nsid self.async_msg_queue.put(msg) + def _recvmsg(self, flags=0): + reply, ancdata, _, _ = self.sock.recvmsg(self._recv_size, 4096, flags) + return reply, ancdata + def check_ntf(self): while True: try: - reply = self.sock.recv(self._recv_size, socket.MSG_DONTWAIT) + reply, ancdata = self._recvmsg(socket.MSG_DONTWAIT) except BlockingIOError: return + nsid = self._decode_nsid(ancdata) nms = NlMsgs(reply) self._recv_dbg_print(reply, nms) for nl_msg in nms: @@ -1271,7 +1297,7 @@ class YnlFamily(SpecFamily): print("Unexpected msg id while checking for ntf", decoded) continue - self.handle_ntf(decoded) + self.handle_ntf(decoded, nsid) def poll_ntf(self, duration=None): start_time = time.time() @@ -1335,7 +1361,8 @@ class YnlFamily(SpecFamily): rsp = [] op_rsp = [] while not done: - reply = self.sock.recv(self._recv_size) + reply, ancdata = self._recvmsg() + nsid = self._decode_nsid(ancdata) nms = NlMsgs(reply) self._recv_dbg_print(reply, nms) for nl_msg in nms: @@ -1374,7 +1401,7 @@ class YnlFamily(SpecFamily): # Check if this is a reply to our request if nl_msg.nl_seq not in reqs_by_seq or decoded.cmd() != op.rsp_value: if decoded.cmd() in self.async_msg_ids: - self.handle_ntf(decoded) + self.handle_ntf(decoded, nsid) continue print('Unexpected message: ' + repr(decoded)) continue -- cgit v1.2.3 From 28db0338db61ec75d146192463907351907a0dbc Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 20 May 2026 12:18:49 +0100 Subject: Revert "drivers: net: 3com: 3c509: Remove this driver" This reverts commit 91f3a27ae9f66d81a5906461762c37c8a2bcab06. Contrary to the assumption stated with the original commit description this driver is in use and I'm going to maintain it for the foreseeable future. Signed-off-by: Maciej W. Rozycki Link: https://patch.msgid.link/alpine.DEB.2.21.2605201204260.1450@angie.orcam.me.uk Signed-off-by: Jakub Kicinski --- Documentation/.renames.txt | 1 + .../device_drivers/ethernet/3com/3c509.rst | 249 ++++ .../networking/device_drivers/ethernet/index.rst | 1 + arch/powerpc/configs/ppc6xx_defconfig | 1 + drivers/net/ethernet/3com/3c509.c | 1448 ++++++++++++++++++++ drivers/net/ethernet/3com/Kconfig | 14 + drivers/net/ethernet/3com/Makefile | 1 + 7 files changed, 1715 insertions(+) create mode 100644 Documentation/networking/device_drivers/ethernet/3com/3c509.rst create mode 100644 drivers/net/ethernet/3com/3c509.c diff --git a/Documentation/.renames.txt b/Documentation/.renames.txt index 43d44753ab93..aa7e5aa4a81b 100644 --- a/Documentation/.renames.txt +++ b/Documentation/.renames.txt @@ -786,6 +786,7 @@ networking/altera_tse networking/device_drivers/ethernet/altera/altera_tse networking/bpf_flow_dissector bpf/prog_flow_dissector networking/cxacru networking/device_drivers/atm/cxacru networking/defza networking/device_drivers/fddi/defza +networking/device_drivers/3com/3c509 networking/device_drivers/ethernet/3com/3c509 networking/device_drivers/3com/vortex networking/device_drivers/ethernet/3com/vortex networking/device_drivers/amazon/ena networking/device_drivers/ethernet/amazon/ena networking/device_drivers/aquantia/atlantic networking/device_drivers/ethernet/aquantia/atlantic diff --git a/Documentation/networking/device_drivers/ethernet/3com/3c509.rst b/Documentation/networking/device_drivers/ethernet/3com/3c509.rst new file mode 100644 index 000000000000..47f706bacdd9 --- /dev/null +++ b/Documentation/networking/device_drivers/ethernet/3com/3c509.rst @@ -0,0 +1,249 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================================================================= +Linux and the 3Com EtherLink III Series Ethercards (driver v1.18c and higher) +============================================================================= + +This file contains the instructions and caveats for v1.18c and higher versions +of the 3c509 driver. You should not use the driver without reading this file. + +release 1.0 + +28 February 2002 + +Current maintainer (corrections to): + David Ruggiero + +Introduction +============ + +The following are notes and information on using the 3Com EtherLink III series +ethercards in Linux. These cards are commonly known by the most widely-used +card's 3Com model number, 3c509. They are all 10mb/s ISA-bus cards and shouldn't +be (but sometimes are) confused with the similarly-numbered PCI-bus "3c905" +(aka "Vortex" or "Boomerang") series. Kernel support for the 3c509 family is +provided by the module 3c509.c, which has code to support all of the following +models: + + - 3c509 (original ISA card) + - 3c509B (later revision of the ISA card; supports full-duplex) + - 3c589 (PCMCIA) + - 3c589B (later revision of the 3c589; supports full-duplex) + - 3c579 (EISA) + +Large portions of this documentation were heavily borrowed from the guide +written the original author of the 3c509 driver, Donald Becker. The master +copy of that document, which contains notes on older versions of the driver, +currently resides on Scyld web server: http://www.scyld.com/. + + +Special Driver Features +======================= + +Overriding card settings + +The driver allows boot- or load-time overriding of the card's detected IOADDR, +IRQ, and transceiver settings, although this capability shouldn't generally be +needed except to enable full-duplex mode (see below). An example of the syntax +for LILO parameters for doing this:: + + ether=10,0x310,3,0x3c509,eth0 + +This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and +transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts +with other card types when overriding the I/O address. When the driver is +loaded as a module, only the IRQ may be overridden. For example, +setting two cards to IRQ10 and IRQ11 is done by using the irq module +option:: + + options 3c509 irq=10,11 + + +Full-duplex mode +================ + +The v1.18c driver added support for the 3c509B's full-duplex capabilities. +In order to enable and successfully use full-duplex mode, three conditions +must be met: + +(a) You must have a Etherlink III card model whose hardware supports full- +duplex operations. Currently, the only members of the 3c509 family that are +positively known to support full-duplex are the 3c509B (ISA bus) and 3c589B +(PCMCIA) cards. Cards without the "B" model designation do *not* support +full-duplex mode; these include the original 3c509 (no "B"), the original +3c589, the 3c529 (MCA bus), and the 3c579 (EISA bus). + +(b) You must be using your card's 10baseT transceiver (i.e., the RJ-45 +connector), not its AUI (thick-net) or 10base2 (thin-net/coax) interfaces. +AUI and 10base2 network cabling is physically incapable of full-duplex +operation. + +(c) Most importantly, your 3c509B must be connected to a link partner that is +itself full-duplex capable. This is almost certainly one of two things: a full- +duplex-capable Ethernet switch (*not* a hub), or a full-duplex-capable NIC on +another system that's connected directly to the 3c509B via a crossover cable. + +Full-duplex mode can be enabled using 'ethtool'. + +.. warning:: + + Extremely important caution concerning full-duplex mode + + Understand that the 3c509B's hardware's full-duplex support is much more + limited than that provide by more modern network interface cards. Although + at the physical layer of the network it fully supports full-duplex operation, + the card was designed before the current Ethernet auto-negotiation (N-way) + spec was written. This means that the 3c509B family ***cannot and will not + auto-negotiate a full-duplex connection with its link partner under any + circumstances, no matter how it is initialized***. If the full-duplex mode + of the 3c509B is enabled, its link partner will very likely need to be + independently _forced_ into full-duplex mode as well; otherwise various nasty + failures will occur - at the very least, you'll see massive numbers of packet + collisions. This is one of very rare circumstances where disabling auto- + negotiation and forcing the duplex mode of a network interface card or switch + would ever be necessary or desirable. + + +Available Transceiver Types +=========================== + +For versions of the driver v1.18c and above, the available transceiver types are: + +== ========================================================================= +0 transceiver type from EEPROM config (normally 10baseT); force half-duplex +1 AUI (thick-net / DB15 connector) +2 (undefined) +3 10base2 (thin-net == coax / BNC connector) +4 10baseT (RJ-45 connector); force half-duplex mode +8 transceiver type and duplex mode taken from card's EEPROM config settings +12 10baseT (RJ-45 connector); force full-duplex mode +== ========================================================================= + +Prior to driver version 1.18c, only transceiver codes 0-4 were supported. Note +that the new transceiver codes 8 and 12 are the *only* ones that will enable +full-duplex mode, no matter what the card's detected EEPROM settings might be. +This insured that merely upgrading the driver from an earlier version would +never automatically enable full-duplex mode in an existing installation; +it must always be explicitly enabled via one of these code in order to be +activated. + +The transceiver type can be changed using 'ethtool'. + + +Interpretation of error messages and common problems +---------------------------------------------------- + +Error Messages +^^^^^^^^^^^^^^ + +eth0: Infinite loop in interrupt, status 2011. +These are "mostly harmless" message indicating that the driver had too much +work during that interrupt cycle. With a status of 0x2011 you are receiving +packets faster than they can be removed from the card. This should be rare +or impossible in normal operation. Possible causes of this error report are: + + - a "green" mode enabled that slows the processor down when there is no + keyboard activity. + + - some other device or device driver hogging the bus or disabling interrupts. + Check /proc/interrupts for excessive interrupt counts. The timer tick + interrupt should always be incrementing faster than the others. + +No received packets +^^^^^^^^^^^^^^^^^^^ + +If a 3c509, 3c562 or 3c589 can successfully transmit packets, but never +receives packets (as reported by /proc/net/dev or 'ifconfig') you likely +have an interrupt line problem. Check /proc/interrupts to verify that the +card is actually generating interrupts. If the interrupt count is not +increasing you likely have a physical conflict with two devices trying to +use the same ISA IRQ line. The common conflict is with a sound card on IRQ10 +or IRQ5, and the easiest solution is to move the 3c509 to a different +interrupt line. If the device is receiving packets but 'ping' doesn't work, +you have a routing problem. + +Tx Carrier Errors Reported in /proc/net/dev +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + +If an EtherLink III appears to transmit packets, but the "Tx carrier errors" +field in /proc/net/dev increments as quickly as the Tx packet count, you +likely have an unterminated network or the incorrect media transceiver selected. + +3c509B card is not detected on machines with an ISA PnP BIOS. +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +While the updated driver works with most PnP BIOS programs, it does not work +with all. This can be fixed by disabling PnP support using the 3Com-supplied +setup program. + +3c509 card is not detected on overclocked machines +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Increase the delay time in id_read_eeprom() from the current value, 500, +to an absurdly high value, such as 5000. + + +Decoding Status and Error Messages +---------------------------------- + + +The bits in the main status register are: + +===== ====================================== +value description +===== ====================================== +0x01 Interrupt latch +0x02 Tx overrun, or Rx underrun +0x04 Tx complete +0x08 Tx FIFO room available +0x10 A complete Rx packet has arrived +0x20 A Rx packet has started to arrive +0x40 The driver has requested an interrupt +0x80 Statistics counter nearly full +===== ====================================== + +The bits in the transmit (Tx) status word are: + +===== ============================================ +value description +===== ============================================ +0x02 Out-of-window collision. +0x04 Status stack overflow (normally impossible). +0x08 16 collisions. +0x10 Tx underrun (not enough PCI bus bandwidth). +0x20 Tx jabber. +0x40 Tx interrupt requested. +0x80 Status is valid (this should always be set). +===== ============================================ + + +When a transmit error occurs the driver produces a status message such as:: + + eth0: Transmit error, Tx status register 82 + +The two values typically seen here are: + +0x82 +^^^^ + +Out of window collision. This typically occurs when some other Ethernet +host is incorrectly set to full duplex on a half duplex network. + +0x88 +^^^^ + +16 collisions. This typically occurs when the network is exceptionally busy +or when another host doesn't correctly back off after a collision. If this +error is mixed with 0x82 errors it is the result of a host incorrectly set +to full duplex (see above). + +Both of these errors are the result of network problems that should be +corrected. They do not represent driver malfunction. + + +Revision history (this file) +============================ + +28Feb02 v1.0 DR New; major portions based on Becker original 3c509 docs + diff --git a/Documentation/networking/device_drivers/ethernet/index.rst b/Documentation/networking/device_drivers/ethernet/index.rst index 64621c21fd78..1d25be493ae9 100644 --- a/Documentation/networking/device_drivers/ethernet/index.rst +++ b/Documentation/networking/device_drivers/ethernet/index.rst @@ -10,6 +10,7 @@ Contents: .. toctree:: :maxdepth: 2 + 3com/3c509 3com/vortex amazon/ena altera/altera_tse diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index ccabc6e17168..eda1fec7ffd9 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -393,6 +393,7 @@ CONFIG_NETCONSOLE=m CONFIG_TUN=m CONFIG_VETH=m CONFIG_VIRTIO_NET=m +CONFIG_EL3=m CONFIG_VORTEX=m CONFIG_TYPHOON=m CONFIG_ADAPTEC_STARFIRE=m diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c new file mode 100644 index 000000000000..fb68339e1511 --- /dev/null +++ b/drivers/net/ethernet/3com/3c509.c @@ -0,0 +1,1448 @@ +/* 3c509.c: A 3c509 EtherLink3 ethernet driver for linux. */ +/* + Written 1993-2000 by Donald Becker. + + Copyright 1994-2000 by Donald Becker. + Copyright 1993 United States Government as represented by the + Director, National Security Agency. This software may be used and + distributed according to the terms of the GNU General Public License, + incorporated herein by reference. + + This driver is for the 3Com EtherLinkIII series. + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Known limitations: + Because of the way 3c509 ISA detection works it's difficult to predict + a priori which of several ISA-mode cards will be detected first. + + This driver does not use predictive interrupt mode, resulting in higher + packet latency but lower overhead. If interrupts are disabled for an + unusually long time it could also result in missed packets, but in + practice this rarely happens. + + + FIXES: + Alan Cox: Removed the 'Unexpected interrupt' bug. + Michael Meskes: Upgraded to Donald Becker's version 1.07. + Alan Cox: Increased the eeprom delay. Regardless of + what the docs say some people definitely + get problems with lower (but in card spec) + delays + v1.10 4/21/97 Fixed module code so that multiple cards may be detected, + other cleanups. -djb + Andrea Arcangeli: Upgraded to Donald Becker's version 1.12. + Rick Payne: Fixed SMP race condition + v1.13 9/8/97 Made 'max_interrupt_work' an insmod-settable variable -djb + v1.14 10/15/97 Avoided waiting..discard message for fast machines -djb + v1.15 1/31/98 Faster recovery for Tx errors. -djb + v1.16 2/3/98 Different ID port handling to avoid sound cards. -djb + v1.18 12Mar2001 Andrew Morton + - Avoid bogus detect of 3c590's (Andrzej Krzysztofowicz) + - Reviewed against 1.18 from scyld.com + v1.18a 17Nov2001 Jeff Garzik + - ethtool support + v1.18b 1Mar2002 Zwane Mwaikambo + - Power Management support + v1.18c 1Mar2002 David Ruggiero + - Full duplex support + v1.19 16Oct2002 Zwane Mwaikambo + - Additional ethtool features + v1.19a 28Oct2002 Davud Ruggiero + - Increase *read_eeprom udelay to workaround oops with 2 cards. + v1.19b 08Nov2002 Marc Zyngier + - Introduce driver model for EISA cards. + v1.20 04Feb2008 Ondrej Zary + - convert to isa_driver and pnp_driver and some cleanups +*/ + +#define DRV_NAME "3c509" + +/* A few values that may be tweaked. */ + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (400*HZ/1000) + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for udelay() */ +#include +#include +#include +#include +#include + +#include +#include +#include + +#ifdef EL3_DEBUG +static int el3_debug = EL3_DEBUG; +#else +static int el3_debug = 2; +#endif + +/* Used to do a global count of all the cards in the system. Must be + * a global variable so that the eisa probe routines can increment + * it */ +static int el3_cards = 0; +#define EL3_MAX_CARDS 8 + +/* To minimize the size of the driver source I only define operating + constants if they are used several times. You'll need the manual + anyway if you want to understand driver details. */ +/* Offsets from base I/O address. */ +#define EL3_DATA 0x00 +#define EL3_CMD 0x0e +#define EL3_STATUS 0x0e +#define EEPROM_READ 0x80 + +#define EL3_IO_EXTENT 16 + +#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) + + +/* The top five bits written to EL3_CMD are a command, the lower + 11 bits are the parameter, if applicable. */ +enum c509cmd { + TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, + RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11, + TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, + FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, + SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, + SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11, + StatsDisable = 22<<11, StopCoax = 23<<11, PowerUp = 27<<11, + PowerDown = 28<<11, PowerAuto = 29<<11}; + +enum c509status { + IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, + TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, + IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000, }; + +/* The SetRxFilter command accepts the following classes: */ +enum RxFilter { + RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 }; + +/* Register window 1 offsets, the window used in normal operation. */ +#define TX_FIFO 0x00 +#define RX_FIFO 0x00 +#define RX_STATUS 0x08 +#define TX_STATUS 0x0B +#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */ + +#define WN0_CONF_CTRL 0x04 /* Window 0: Configuration control register */ +#define WN0_ADDR_CONF 0x06 /* Window 0: Address configuration register */ +#define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */ +#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */ +#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ +#define WN4_NETDIAG 0x06 /* Window 4: Net diagnostic */ +#define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback") */ + +/* + * Must be a power of two (we use a binary and in the + * circular queue) + */ +#define SKB_QUEUE_SIZE 64 + +enum el3_cardtype { EL3_ISA, EL3_PNP, EL3_EISA }; + +struct el3_private { + spinlock_t lock; + /* skb send-queue */ + int head, size; + struct sk_buff *queue[SKB_QUEUE_SIZE]; + enum el3_cardtype type; +}; +static int id_port; +static int current_tag; +static struct net_device *el3_devs[EL3_MAX_CARDS]; + +/* Parameters that may be passed into the module. */ +static int debug = -1; +static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1}; +/* Maximum events (Rx packets, etc.) to handle at each interrupt. */ +static int max_interrupt_work = 10; +#ifdef CONFIG_PNP +static int nopnp; +#endif + +static int el3_common_init(struct net_device *dev); +static void el3_common_remove(struct net_device *dev); +static ushort id_read_eeprom(int index); +static ushort read_eeprom(int ioaddr, int index); +static int el3_open(struct net_device *dev); +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, struct net_device *dev); +static irqreturn_t el3_interrupt(int irq, void *dev_id); +static void update_stats(struct net_device *dev); +static struct net_device_stats *el3_get_stats(struct net_device *dev); +static int el3_rx(struct net_device *dev); +static int el3_close(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); +static void el3_tx_timeout (struct net_device *dev, unsigned int txqueue); +static void el3_down(struct net_device *dev); +static void el3_up(struct net_device *dev); +static const struct ethtool_ops ethtool_ops; +#ifdef CONFIG_PM +static int el3_suspend(struct device *, pm_message_t); +static int el3_resume(struct device *); +#else +#define el3_suspend NULL +#define el3_resume NULL +#endif + + +/* generic device remove for all device types */ +static int el3_device_remove (struct device *device); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void el3_poll_controller(struct net_device *dev); +#endif + +/* Return 0 on success, 1 on error, 2 when found already detected PnP card */ +static int el3_isa_id_sequence(__be16 *phys_addr) +{ + short lrs_state = 0xff; + int i; + + /* ISA boards are detected by sending the ID sequence to the + ID_PORT. We find cards past the first by setting the 'current_tag' + on cards as they are found. Cards with their tag set will not + respond to subsequent ID sequences. */ + + outb(0x00, id_port); + outb(0x00, id_port); + for (i = 0; i < 255; i++) { + outb(lrs_state, id_port); + lrs_state <<= 1; + lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state; + } + /* For the first probe, clear all board's tag registers. */ + if (current_tag == 0) + outb(0xd0, id_port); + else /* Otherwise kill off already-found boards. */ + outb(0xd8, id_port); + if (id_read_eeprom(7) != 0x6d50) + return 1; + /* Read in EEPROM data, which does contention-select. + Only the lowest address board will stay "on-line". + 3Com got the byte order backwards. */ + for (i = 0; i < 3; i++) + phys_addr[i] = htons(id_read_eeprom(i)); +#ifdef CONFIG_PNP + if (!nopnp) { + /* The ISA PnP 3c509 cards respond to the ID sequence too. + This check is needed in order not to register them twice. */ + for (i = 0; i < el3_cards; i++) { + struct el3_private *lp = netdev_priv(el3_devs[i]); + if (lp->type == EL3_PNP && + ether_addr_equal((u8 *)phys_addr, el3_devs[i]->dev_addr)) { + if (el3_debug > 3) + pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n", + phys_addr[0] & 0xff, phys_addr[0] >> 8, + phys_addr[1] & 0xff, phys_addr[1] >> 8, + phys_addr[2] & 0xff, phys_addr[2] >> 8); + /* Set the adaptor tag so that the next card can be found. */ + outb(0xd0 + ++current_tag, id_port); + return 2; + } + } + } +#endif /* CONFIG_PNP */ + return 0; + +} + +static void el3_dev_fill(struct net_device *dev, __be16 *phys_addr, int ioaddr, + int irq, int if_port, enum el3_cardtype type) +{ + struct el3_private *lp = netdev_priv(dev); + + eth_hw_addr_set(dev, (u8 *)phys_addr); + dev->base_addr = ioaddr; + dev->irq = irq; + dev->if_port = if_port; + lp->type = type; +} + +static int el3_isa_match(struct device *pdev, unsigned int ndev) +{ + struct net_device *dev; + int ioaddr, isa_irq, if_port, err; + unsigned int iobase; + __be16 phys_addr[3]; + + while ((err = el3_isa_id_sequence(phys_addr)) == 2) + ; /* Skip to next card when PnP card found */ + if (err == 1) + return 0; + + iobase = id_read_eeprom(8); + if_port = iobase >> 14; + ioaddr = 0x200 + ((iobase & 0x1f) << 4); + if (irq[el3_cards] > 1 && irq[el3_cards] < 16) + isa_irq = irq[el3_cards]; + else + isa_irq = id_read_eeprom(9) >> 12; + + dev = alloc_etherdev(sizeof(struct el3_private)); + if (!dev) + return -ENOMEM; + + SET_NETDEV_DEV(dev, pdev); + + if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-isa")) { + free_netdev(dev); + return 0; + } + + /* Set the adaptor tag so that the next card can be found. */ + outb(0xd0 + ++current_tag, id_port); + + /* Activate the adaptor at the EEPROM location. */ + outb((ioaddr >> 4) | 0xe0, id_port); + + EL3WINDOW(0); + if (inw(ioaddr) != 0x6d50) { + free_netdev(dev); + return 0; + } + + /* Free the interrupt so that some other card can use it. */ + outw(0x0f00, ioaddr + WN0_IRQ); + + el3_dev_fill(dev, phys_addr, ioaddr, isa_irq, if_port, EL3_ISA); + dev_set_drvdata(pdev, dev); + if (el3_common_init(dev)) { + free_netdev(dev); + return 0; + } + + el3_devs[el3_cards++] = dev; + return 1; +} + +static void el3_isa_remove(struct device *pdev, + unsigned int ndev) +{ + el3_device_remove(pdev); + dev_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM +static int el3_isa_suspend(struct device *dev, unsigned int n, + pm_message_t state) +{ + current_tag = 0; + return el3_suspend(dev, state); +} + +static int el3_isa_resume(struct device *dev, unsigned int n) +{ + struct net_device *ndev = dev_get_drvdata(dev); + int ioaddr = ndev->base_addr, err; + __be16 phys_addr[3]; + + while ((err = el3_isa_id_sequence(phys_addr)) == 2) + ; /* Skip to next card when PnP card found */ + if (err == 1) + return 0; + /* Set the adaptor tag so that the next card can be found. */ + outb(0xd0 + ++current_tag, id_port); + /* Enable the card */ + outb((ioaddr >> 4) | 0xe0, id_port); + EL3WINDOW(0); + if (inw(ioaddr) != 0x6d50) + return 1; + /* Free the interrupt so that some other card can use it. */ + outw(0x0f00, ioaddr + WN0_IRQ); + return el3_resume(dev); +} +#endif + +static struct isa_driver el3_isa_driver = { + .match = el3_isa_match, + .remove = el3_isa_remove, +#ifdef CONFIG_PM + .suspend = el3_isa_suspend, + .resume = el3_isa_resume, +#endif + .driver = { + .name = "3c509" + }, +}; +static int isa_registered; + +#ifdef CONFIG_PNP +static const struct pnp_device_id el3_pnp_ids[] = { + { .id = "TCM5090" }, /* 3Com Etherlink III (TP) */ + { .id = "TCM5091" }, /* 3Com Etherlink III */ + { .id = "TCM5094" }, /* 3Com Etherlink III (combo) */ + { .id = "TCM5095" }, /* 3Com Etherlink III (TPO) */ + { .id = "TCM5098" }, /* 3Com Etherlink III (TPC) */ + { .id = "PNP80f7" }, /* 3Com Etherlink III compatible */ + { .id = "PNP80f8" }, /* 3Com Etherlink III compatible */ + { .id = "" } +}; +MODULE_DEVICE_TABLE(pnp, el3_pnp_ids); + +static int el3_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *id) +{ + short i; + int ioaddr, irq, if_port; + __be16 phys_addr[3]; + struct net_device *dev = NULL; + int err; + + ioaddr = pnp_port_start(pdev, 0); + if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-pnp")) + return -EBUSY; + irq = pnp_irq(pdev, 0); + EL3WINDOW(0); + for (i = 0; i < 3; i++) + phys_addr[i] = htons(read_eeprom(ioaddr, i)); + if_port = read_eeprom(ioaddr, 8) >> 14; + dev = alloc_etherdev(sizeof(struct el3_private)); + if (!dev) { + release_region(ioaddr, EL3_IO_EXTENT); + return -ENOMEM; + } + SET_NETDEV_DEV(dev, &pdev->dev); + + el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_PNP); + pnp_set_drvdata(pdev, dev); + err = el3_common_init(dev); + + if (err) { + pnp_set_drvdata(pdev, NULL); + free_netdev(dev); + return err; + } + + el3_devs[el3_cards++] = dev; + return 0; +} + +static void el3_pnp_remove(struct pnp_dev *pdev) +{ + el3_common_remove(pnp_get_drvdata(pdev)); + pnp_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM +static int el3_pnp_suspend(struct pnp_dev *pdev, pm_message_t state) +{ + return el3_suspend(&pdev->dev, state); +} + +static int el3_pnp_resume(struct pnp_dev *pdev) +{ + return el3_resume(&pdev->dev); +} +#endif + +static struct pnp_driver el3_pnp_driver = { + .name = "3c509", + .id_table = el3_pnp_ids, + .probe = el3_pnp_probe, + .remove = el3_pnp_remove, +#ifdef CONFIG_PM + .suspend = el3_pnp_suspend, + .resume = el3_pnp_resume, +#endif +}; +static int pnp_registered; +#endif /* CONFIG_PNP */ + +#ifdef CONFIG_EISA +static const struct eisa_device_id el3_eisa_ids[] = { + { "TCM5090" }, + { "TCM5091" }, + { "TCM5092" }, + { "TCM5093" }, + { "TCM5094" }, + { "TCM5095" }, + { "TCM5098" }, + { "" } +}; +MODULE_DEVICE_TABLE(eisa, el3_eisa_ids); + +static int el3_eisa_probe (struct device *device); + +static struct eisa_driver el3_eisa_driver = { + .id_table = el3_eisa_ids, + .driver = { + .name = "3c579", + .probe = el3_eisa_probe, + .remove = el3_device_remove, + .suspend = el3_suspend, + .resume = el3_resume, + } +}; +static int eisa_registered; +#endif + +static const struct net_device_ops netdev_ops = { + .ndo_open = el3_open, + .ndo_stop = el3_close, + .ndo_start_xmit = el3_start_xmit, + .ndo_get_stats = el3_get_stats, + .ndo_set_rx_mode = set_multicast_list, + .ndo_tx_timeout = el3_tx_timeout, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = el3_poll_controller, +#endif +}; + +static int el3_common_init(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + int err; + static const char * const if_names[] = { + "10baseT", "AUI", "undefined", "BNC" + }; + + spin_lock_init(&lp->lock); + + if (dev->mem_start & 0x05) { /* xcvr codes 1/3/4/12 */ + dev->if_port = (dev->mem_start & 0x0f); + } else { /* xcvr codes 0/8 */ + /* use eeprom value, but save user's full-duplex selection */ + dev->if_port |= (dev->mem_start & 0x08); + } + + /* The EL3-specific entries in the device structure. */ + dev->netdev_ops = &netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + dev->ethtool_ops = ðtool_ops; + + err = register_netdev(dev); + if (err) { + pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n", + dev->base_addr, dev->irq); + release_region(dev->base_addr, EL3_IO_EXTENT); + return err; + } + + pr_info("%s: 3c5x9 found at %#3.3lx, %s port, address %pM, IRQ %d.\n", + dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)], + dev->dev_addr, dev->irq); + + return 0; + +} + +static void el3_common_remove (struct net_device *dev) +{ + unregister_netdev (dev); + release_region(dev->base_addr, EL3_IO_EXTENT); + free_netdev (dev); +} + +#ifdef CONFIG_EISA +static int el3_eisa_probe(struct device *device) +{ + short i; + int ioaddr, irq, if_port; + __be16 phys_addr[3]; + struct net_device *dev = NULL; + struct eisa_device *edev; + int err; + + /* Yeepee, The driver framework is calling us ! */ + edev = to_eisa_device (device); + ioaddr = edev->base_addr; + + if (!request_region(ioaddr, EL3_IO_EXTENT, "3c579-eisa")) + return -EBUSY; + + /* Change the register set to the configuration window 0. */ + outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD); + + irq = inw(ioaddr + WN0_IRQ) >> 12; + if_port = inw(ioaddr + 6)>>14; + for (i = 0; i < 3; i++) + phys_addr[i] = htons(read_eeprom(ioaddr, i)); + + /* Restore the "Product ID" to the EEPROM read register. */ + read_eeprom(ioaddr, 3); + + dev = alloc_etherdev(sizeof (struct el3_private)); + if (dev == NULL) { + release_region(ioaddr, EL3_IO_EXTENT); + return -ENOMEM; + } + + SET_NETDEV_DEV(dev, device); + + el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_EISA); + eisa_set_drvdata (edev, dev); + err = el3_common_init(dev); + + if (err) { + eisa_set_drvdata (edev, NULL); + free_netdev(dev); + return err; + } + + el3_devs[el3_cards++] = dev; + return 0; +} +#endif + +/* This remove works for all device types. + * + * The net dev must be stored in the driver data field */ +static int el3_device_remove(struct device *device) +{ + struct net_device *dev; + + dev = dev_get_drvdata(device); + + el3_common_remove (dev); + return 0; +} + +/* Read a word from the EEPROM using the regular EEPROM access register. + Assume that we are in register window zero. + */ +static ushort read_eeprom(int ioaddr, int index) +{ + outw(EEPROM_READ + index, ioaddr + 10); + /* Pause for at least 162 us. for the read to take place. + Some chips seem to require much longer */ + mdelay(2); + return inw(ioaddr + 12); +} + +/* Read a word from the EEPROM when in the ISA ID probe state. */ +static ushort id_read_eeprom(int index) +{ + int bit, word = 0; + + /* Issue read command, and pause for at least 162 us. for it to complete. + Assume extra-fast 16Mhz bus. */ + outb(EEPROM_READ + index, id_port); + + /* Pause for at least 162 us. for the read to take place. */ + /* Some chips seem to require much longer */ + mdelay(4); + + for (bit = 15; bit >= 0; bit--) + word = (word << 1) + (inb(id_port) & 0x01); + + if (el3_debug > 3) + pr_debug(" 3c509 EEPROM word %d %#4.4x.\n", index, word); + + return word; +} + + +static int +el3_open(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + int i; + + outw(TxReset, ioaddr + EL3_CMD); + outw(RxReset, ioaddr + EL3_CMD); + outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD); + + i = request_irq(dev->irq, el3_interrupt, 0, dev->name, dev); + if (i) + return i; + + EL3WINDOW(0); + if (el3_debug > 3) + pr_debug("%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name, + dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS)); + + el3_up(dev); + + if (el3_debug > 3) + pr_debug("%s: Opened 3c509 IRQ %d status %4.4x.\n", + dev->name, dev->irq, inw(ioaddr + EL3_STATUS)); + + return 0; +} + +static void +el3_tx_timeout (struct net_device *dev, unsigned int txqueue) +{ + int ioaddr = dev->base_addr; + + /* Transmitter timeout, serious problems. */ + pr_warn("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d\n", + dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS), + inw(ioaddr + TX_FREE)); + dev->stats.tx_errors++; + netif_trans_update(dev); /* prevent tx timeout */ + /* Issue TX_RESET and TX_START commands. */ + outw(TxReset, ioaddr + EL3_CMD); + outw(TxEnable, ioaddr + EL3_CMD); + netif_wake_queue(dev); +} + + +static netdev_tx_t +el3_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + unsigned long flags; + + netif_stop_queue (dev); + + dev->stats.tx_bytes += skb->len; + + if (el3_debug > 4) { + pr_debug("%s: el3_start_xmit(length = %u) called, status %4.4x.\n", + dev->name, skb->len, inw(ioaddr + EL3_STATUS)); + } + /* + * We lock the driver against other processors. Note + * we don't need to lock versus the IRQ as we suspended + * that. This means that we lose the ability to take + * an RX during a TX upload. That sucks a bit with SMP + * on an original 3c509 (2K buffer) + * + * Using disable_irq stops us crapping on other + * time sensitive devices. + */ + + spin_lock_irqsave(&lp->lock, flags); + + /* Put out the doubleword header... */ + outw(skb->len, ioaddr + TX_FIFO); + outw(0x00, ioaddr + TX_FIFO); + /* ... and the packet rounded to a doubleword. */ + outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); + + if (inw(ioaddr + TX_FREE) > 1536) + netif_start_queue(dev); + else + /* Interrupt us when the FIFO has room for max-sized packet. */ + outw(SetTxThreshold + 1536, ioaddr + EL3_CMD); + + spin_unlock_irqrestore(&lp->lock, flags); + + dev_consume_skb_any (skb); + + /* Clear the Tx status stack. */ + { + short tx_status; + int i = 4; + + while (--i > 0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) { + if (tx_status & 0x38) dev->stats.tx_aborted_errors++; + if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD); + if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD); + outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ + } + } + return NETDEV_TX_OK; +} + +/* The EL3 interrupt handler. */ +static irqreturn_t +el3_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct el3_private *lp; + int ioaddr, status; + int i = max_interrupt_work; + + lp = netdev_priv(dev); + spin_lock(&lp->lock); + + ioaddr = dev->base_addr; + + if (el3_debug > 4) { + status = inw(ioaddr + EL3_STATUS); + pr_debug("%s: interrupt, status %4.4x.\n", dev->name, status); + } + + while ((status = inw(ioaddr + EL3_STATUS)) & + (IntLatch | RxComplete | StatsFull)) { + + if (status & RxComplete) + el3_rx(dev); + + if (status & TxAvailable) { + if (el3_debug > 5) + pr_debug(" TX room bit was handled.\n"); + /* There's room in the FIFO for a full-sized packet. */ + outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); + netif_wake_queue (dev); + } + if (status & (AdapterFailure | RxEarly | StatsFull | TxComplete)) { + /* Handle all uncommon interrupts. */ + if (status & StatsFull) /* Empty statistics. */ + update_stats(dev); + if (status & RxEarly) { /* Rx early is unused. */ + el3_rx(dev); + outw(AckIntr | RxEarly, ioaddr + EL3_CMD); + } + if (status & TxComplete) { /* Really Tx error. */ + short tx_status; + int i = 4; + + while (--i>0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) { + if (tx_status & 0x38) dev->stats.tx_aborted_errors++; + if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD); + if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD); + outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ + } + } + if (status & AdapterFailure) { + /* Adapter failure requires Rx reset and reinit. */ + outw(RxReset, ioaddr + EL3_CMD); + /* Set the Rx filter to the current state. */ + outw(SetRxFilter | RxStation | RxBroadcast + | (dev->flags & IFF_ALLMULTI ? RxMulticast : 0) + | (dev->flags & IFF_PROMISC ? RxProm : 0), + ioaddr + EL3_CMD); + outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ + outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD); + } + } + + if (--i < 0) { + pr_err("%s: Infinite loop in interrupt, status %4.4x.\n", + dev->name, status); + /* Clear all interrupts. */ + outw(AckIntr | 0xFF, ioaddr + EL3_CMD); + break; + } + /* Acknowledge the IRQ. */ + outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); /* Ack IRQ */ + } + + if (el3_debug > 4) { + pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, + inw(ioaddr + EL3_STATUS)); + } + spin_unlock(&lp->lock); + return IRQ_HANDLED; +} + + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + */ +static void el3_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + el3_interrupt(dev->irq, dev); + enable_irq(dev->irq); +} +#endif + +static struct net_device_stats * +el3_get_stats(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + unsigned long flags; + + /* + * This is fast enough not to bother with disable IRQ + * stuff. + */ + + spin_lock_irqsave(&lp->lock, flags); + update_stats(dev); + spin_unlock_irqrestore(&lp->lock, flags); + return &dev->stats; +} + +/* Update statistics. We change to register window 6, so this should be run + single-threaded if the device is active. This is expected to be a rare + operation, and it's simpler for the rest of the driver to assume that + window 1 is always valid rather than use a special window-state variable. + */ +static void update_stats(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + + if (el3_debug > 5) + pr_debug(" Updating the statistics.\n"); + /* Turn off statistics updates while reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + /* Switch to the stats window, and read everything. */ + EL3WINDOW(6); + dev->stats.tx_carrier_errors += inb(ioaddr + 0); + dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); + /* Multiple collisions. */ inb(ioaddr + 2); + dev->stats.collisions += inb(ioaddr + 3); + dev->stats.tx_window_errors += inb(ioaddr + 4); + dev->stats.rx_fifo_errors += inb(ioaddr + 5); + dev->stats.tx_packets += inb(ioaddr + 6); + /* Rx packets */ inb(ioaddr + 7); + /* Tx deferrals */ inb(ioaddr + 8); + inw(ioaddr + 10); /* Total Rx and Tx octets. */ + inw(ioaddr + 12); + + /* Back to window 1, and turn statistics back on. */ + EL3WINDOW(1); + outw(StatsEnable, ioaddr + EL3_CMD); +} + +static int +el3_rx(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + short rx_status; + + if (el3_debug > 5) + pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n", + inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS)); + while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) { + if (rx_status & 0x4000) { /* Error, update stats. */ + short error = rx_status & 0x3800; + + outw(RxDiscard, ioaddr + EL3_CMD); + dev->stats.rx_errors++; + switch (error) { + case 0x0000: dev->stats.rx_over_errors++; break; + case 0x0800: dev->stats.rx_length_errors++; break; + case 0x1000: dev->stats.rx_frame_errors++; break; + case 0x1800: dev->stats.rx_length_errors++; break; + case 0x2000: dev->stats.rx_frame_errors++; break; + case 0x2800: dev->stats.rx_crc_errors++; break; + } + } else { + short pkt_len = rx_status & 0x7ff; + struct sk_buff *skb; + + skb = netdev_alloc_skb(dev, pkt_len + 5); + if (el3_debug > 4) + pr_debug("Receiving packet size %d status %4.4x.\n", + pkt_len, rx_status); + if (skb != NULL) { + skb_reserve(skb, 2); /* Align IP on 16 byte */ + + /* 'skb->data' points to the start of sk_buff data area. */ + insl(ioaddr + RX_FIFO, skb_put(skb,pkt_len), + (pkt_len + 3) >> 2); + + outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */ + skb->protocol = eth_type_trans(skb,dev); + netif_rx(skb); + dev->stats.rx_bytes += pkt_len; + dev->stats.rx_packets++; + continue; + } + outw(RxDiscard, ioaddr + EL3_CMD); + dev->stats.rx_dropped++; + if (el3_debug) + pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", + dev->name, pkt_len); + } + inw(ioaddr + EL3_STATUS); /* Delay. */ + while (inw(ioaddr + EL3_STATUS) & 0x1000) + pr_debug(" Waiting for 3c509 to discard packet, status %x.\n", + inw(ioaddr + EL3_STATUS) ); + } + + return 0; +} + +/* + * Set or clear the multicast filter for this adaptor. + */ +static void +set_multicast_list(struct net_device *dev) +{ + unsigned long flags; + struct el3_private *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + int mc_count = netdev_mc_count(dev); + + if (el3_debug > 1) { + static int old; + if (old != mc_count) { + old = mc_count; + pr_debug("%s: Setting Rx mode to %d addresses.\n", + dev->name, mc_count); + } + } + spin_lock_irqsave(&lp->lock, flags); + if (dev->flags&IFF_PROMISC) { + outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm, + ioaddr + EL3_CMD); + } + else if (mc_count || (dev->flags&IFF_ALLMULTI)) { + outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast, ioaddr + EL3_CMD); + } + else + outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); + spin_unlock_irqrestore(&lp->lock, flags); +} + +static int +el3_close(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + struct el3_private *lp = netdev_priv(dev); + + if (el3_debug > 2) + pr_debug("%s: Shutting down ethercard.\n", dev->name); + + el3_down(dev); + + free_irq(dev->irq, dev); + /* Switching back to window 0 disables the IRQ. */ + EL3WINDOW(0); + if (lp->type != EL3_EISA) { + /* But we explicitly zero the IRQ line select anyway. Don't do + * it on EISA cards, it prevents the module from getting an + * IRQ after unload+reload... */ + outw(0x0f00, ioaddr + WN0_IRQ); + } + + return 0; +} + +static int +el3_link_ok(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + u16 tmp; + + EL3WINDOW(4); + tmp = inw(ioaddr + WN4_MEDIA); + EL3WINDOW(1); + return tmp & (1<<11); +} + +static void +el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_link_ksettings *cmd) +{ + u16 tmp; + int ioaddr = dev->base_addr; + u32 supported; + + EL3WINDOW(0); + /* obtain current transceiver via WN4_MEDIA? */ + tmp = inw(ioaddr + WN0_ADDR_CONF); + switch (tmp >> 14) { + case 0: + cmd->base.port = PORT_TP; + break; + case 1: + cmd->base.port = PORT_AUI; + break; + case 3: + cmd->base.port = PORT_BNC; + break; + default: + break; + } + + cmd->base.duplex = DUPLEX_HALF; + supported = 0; + tmp = inw(ioaddr + WN0_CONF_CTRL); + if (tmp & (1<<13)) + supported |= SUPPORTED_AUI; + if (tmp & (1<<12)) + supported |= SUPPORTED_BNC; + if (tmp & (1<<9)) { + supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full; /* hmm... */ + EL3WINDOW(4); + tmp = inw(ioaddr + WN4_NETDIAG); + if (tmp & FD_ENABLE) + cmd->base.duplex = DUPLEX_FULL; + } + + ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported, + supported); + cmd->base.speed = SPEED_10; + EL3WINDOW(1); +} + +static int +el3_netdev_set_ecmd(struct net_device *dev, + const struct ethtool_link_ksettings *cmd) +{ + u16 tmp; + int ioaddr = dev->base_addr; + + if (cmd->base.speed != SPEED_10) + return -EINVAL; + if ((cmd->base.duplex != DUPLEX_HALF) && + (cmd->base.duplex != DUPLEX_FULL)) + return -EINVAL; + + /* change XCVR type */ + EL3WINDOW(0); + tmp = inw(ioaddr + WN0_ADDR_CONF); + switch (cmd->base.port) { + case PORT_TP: + tmp &= ~(3<<14); + dev->if_port = 0; + break; + case PORT_AUI: + tmp |= (1<<14); + dev->if_port = 1; + break; + case PORT_BNC: + tmp |= (3<<14); + dev->if_port = 3; + break; + default: + return -EINVAL; + } + + outw(tmp, ioaddr + WN0_ADDR_CONF); + if (dev->if_port == 3) { + /* fire up the DC-DC convertor if BNC gets enabled */ + tmp = inw(ioaddr + WN0_ADDR_CONF); + if (tmp & (3 << 14)) { + outw(StartCoax, ioaddr + EL3_CMD); + udelay(800); + } else + return -EIO; + } + + EL3WINDOW(4); + tmp = inw(ioaddr + WN4_NETDIAG); + if (cmd->base.duplex == DUPLEX_FULL) + tmp |= FD_ENABLE; + else + tmp &= ~FD_ENABLE; + outw(tmp, ioaddr + WN4_NETDIAG); + EL3WINDOW(1); + + return 0; +} + +static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + strscpy(info->driver, DRV_NAME, sizeof(info->driver)); +} + +static int el3_get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *cmd) +{ + struct el3_private *lp = netdev_priv(dev); + + spin_lock_irq(&lp->lock); + el3_netdev_get_ecmd(dev, cmd); + spin_unlock_irq(&lp->lock); + return 0; +} + +static int el3_set_link_ksettings(struct net_device *dev, + const struct ethtool_link_ksettings *cmd) +{ + struct el3_private *lp = netdev_priv(dev); + int ret; + + spin_lock_irq(&lp->lock); + ret = el3_netdev_set_ecmd(dev, cmd); + spin_unlock_irq(&lp->lock); + return ret; +} + +static u32 el3_get_link(struct net_device *dev) +{ + struct el3_private *lp = netdev_priv(dev); + u32 ret; + + spin_lock_irq(&lp->lock); + ret = el3_link_ok(dev); + spin_unlock_irq(&lp->lock); + return ret; +} + +static u32 el3_get_msglevel(struct net_device *dev) +{ + return el3_debug; +} + +static void el3_set_msglevel(struct net_device *dev, u32 v) +{ + el3_debug = v; +} + +static const struct ethtool_ops ethtool_ops = { + .get_drvinfo = el3_get_drvinfo, + .get_link = el3_get_link, + .get_msglevel = el3_get_msglevel, + .set_msglevel = el3_set_msglevel, + .get_link_ksettings = el3_get_link_ksettings, + .set_link_ksettings = el3_set_link_ksettings, +}; + +static void +el3_down(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + + netif_stop_queue(dev); + + /* Turn off statistics ASAP. We update lp->stats below. */ + outw(StatsDisable, ioaddr + EL3_CMD); + + /* Disable the receiver and transmitter. */ + outw(RxDisable, ioaddr + EL3_CMD); + outw(TxDisable, ioaddr + EL3_CMD); + + if (dev->if_port == 3) + /* Turn off thinnet power. Green! */ + outw(StopCoax, ioaddr + EL3_CMD); + else if (dev->if_port == 0) { + /* Disable link beat and jabber, if_port may change here next open(). */ + EL3WINDOW(4); + outw(inw(ioaddr + WN4_MEDIA) & ~MEDIA_TP, ioaddr + WN4_MEDIA); + } + + outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); + + update_stats(dev); +} + +static void +el3_up(struct net_device *dev) +{ + int i, sw_info, net_diag; + int ioaddr = dev->base_addr; + + /* Activating the board required and does no harm otherwise */ + outw(0x0001, ioaddr + 4); + + /* Set the IRQ line. */ + outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ); + + /* Set the station address in window 2 each time opened. */ + EL3WINDOW(2); + + for (i = 0; i < 6; i++) + outb(dev->dev_addr[i], ioaddr + i); + + if ((dev->if_port & 0x03) == 3) /* BNC interface */ + /* Start the thinnet transceiver. We should really wait 50ms...*/ + outw(StartCoax, ioaddr + EL3_CMD); + else if ((dev->if_port & 0x03) == 0) { /* 10baseT interface */ + /* Combine secondary sw_info word (the adapter level) and primary + sw_info word (duplex setting plus other useless bits) */ + EL3WINDOW(0); + sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) | + (read_eeprom(ioaddr, 0x0d) & 0xBff0); + + EL3WINDOW(4); + net_diag = inw(ioaddr + WN4_NETDIAG); + net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */ + pr_info("%s: ", dev->name); + switch (dev->if_port & 0x0c) { + case 12: + /* force full-duplex mode if 3c5x9b */ + if (sw_info & 0x000f) { + pr_cont("Forcing 3c5x9b full-duplex mode"); + break; + } + fallthrough; + case 8: + /* set full-duplex mode based on eeprom config setting */ + if ((sw_info & 0x000f) && (sw_info & 0x8000)) { + pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)"); + break; + } + fallthrough; + default: + /* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */ + pr_cont("Setting 3c5x9/3c5x9B half-duplex mode"); + net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */ + } + + outw(net_diag, ioaddr + WN4_NETDIAG); + pr_cont(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info); + if (el3_debug > 3) + pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag); + /* Enable link beat and jabber check. */ + outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA); + } + + /* Switch to the stats window, and clear all stats by reading. */ + outw(StatsDisable, ioaddr + EL3_CMD); + EL3WINDOW(6); + for (i = 0; i < 9; i++) + inb(ioaddr + i); + inw(ioaddr + 10); + inw(ioaddr + 12); + + /* Switch to register set 1 for normal use. */ + EL3WINDOW(1); + + /* Accept b-case and phys addr only. */ + outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); + outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ + + outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ + outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ + /* Allow status bits to be seen. */ + outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD); + /* Ack all pending events, and set active indicator mask. */ + outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, + ioaddr + EL3_CMD); + outw(SetIntrEnb | IntLatch|TxAvailable|TxComplete|RxComplete|StatsFull, + ioaddr + EL3_CMD); + + netif_start_queue(dev); +} + +/* Power Management support functions */ +#ifdef CONFIG_PM + +static int +el3_suspend(struct device *pdev, pm_message_t state) +{ + unsigned long flags; + struct net_device *dev; + struct el3_private *lp; + int ioaddr; + + dev = dev_get_drvdata(pdev); + lp = netdev_priv(dev); + ioaddr = dev->base_addr; + + spin_lock_irqsave(&lp->lock, flags); + + if (netif_running(dev)) + netif_device_detach(dev); + + el3_down(dev); + outw(PowerDown, ioaddr + EL3_CMD); + + spin_unlock_irqrestore(&lp->lock, flags); + return 0; +} + +static int +el3_resume(struct device *pdev) +{ + unsigned long flags; + struct net_device *dev; + struct el3_private *lp; + int ioaddr; + + dev = dev_get_drvdata(pdev); + lp = netdev_priv(dev); + ioaddr = dev->base_addr; + + spin_lock_irqsave(&lp->lock, flags); + + outw(PowerUp, ioaddr + EL3_CMD); + EL3WINDOW(0); + el3_up(dev); + + if (netif_running(dev)) + netif_device_attach(dev); + + spin_unlock_irqrestore(&lp->lock, flags); + return 0; +} + +#endif /* CONFIG_PM */ + +module_param(debug,int, 0); +module_param_hw_array(irq, int, irq, NULL, 0); +module_param(max_interrupt_work, int, 0); +MODULE_PARM_DESC(debug, "debug level (0-6)"); +MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); +MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt"); +#ifdef CONFIG_PNP +module_param(nopnp, int, 0); +MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)"); +#endif /* CONFIG_PNP */ +MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B, 3c529, 3c579) ethernet driver"); +MODULE_LICENSE("GPL"); + +static int __init el3_init_module(void) +{ + int ret = 0; + + if (debug >= 0) + el3_debug = debug; + +#ifdef CONFIG_PNP + if (!nopnp) { + ret = pnp_register_driver(&el3_pnp_driver); + if (!ret) + pnp_registered = 1; + } +#endif + /* Select an open I/O location at 0x1*0 to do ISA contention select. */ + /* Start with 0x110 to avoid some sound cards.*/ + for (id_port = 0x110 ; id_port < 0x200; id_port += 0x10) { + if (!request_region(id_port, 1, "3c509-control")) + continue; + outb(0x00, id_port); + outb(0xff, id_port); + if (inb(id_port) & 0x01) + break; + else + release_region(id_port, 1); + } + if (id_port >= 0x200) { + id_port = 0; + pr_err("No I/O port available for 3c509 activation.\n"); + } else { + ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS); + if (!ret) + isa_registered = 1; + } +#ifdef CONFIG_EISA + ret = eisa_driver_register(&el3_eisa_driver); + if (!ret) + eisa_registered = 1; +#endif + +#ifdef CONFIG_PNP + if (pnp_registered) + ret = 0; +#endif + if (isa_registered) + ret = 0; +#ifdef CONFIG_EISA + if (eisa_registered) + ret = 0; +#endif + return ret; +} + +static void __exit el3_cleanup_module(void) +{ +#ifdef CONFIG_PNP + if (pnp_registered) + pnp_unregister_driver(&el3_pnp_driver); +#endif + if (isa_registered) + isa_unregister_driver(&el3_isa_driver); + if (id_port) + release_region(id_port, 1); +#ifdef CONFIG_EISA + if (eisa_registered) + eisa_driver_unregister(&el3_eisa_driver); +#endif +} + +module_init (el3_init_module); +module_exit (el3_cleanup_module); diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig index 399cb6c56198..81db16744f94 100644 --- a/drivers/net/ethernet/3com/Kconfig +++ b/drivers/net/ethernet/3com/Kconfig @@ -17,6 +17,20 @@ config NET_VENDOR_3COM if NET_VENDOR_3COM +config EL3 + tristate "3c509/3c579 \"EtherLink III\" support" + depends on (ISA || EISA) + help + If you have a network (Ethernet) card belonging to the 3Com + EtherLinkIII series, say Y here. + + If your card is not working you may need to use the DOS + setup disk to disable Plug & Play mode, and to select the default + media type. + + To compile this driver as a module, choose M here. The module + will be called 3c509. + config VORTEX tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support" depends on (PCI || EISA) && HAS_IOPORT_MAP diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile index 5c4d07f1d456..2c65e472196f 100644 --- a/drivers/net/ethernet/3com/Makefile +++ b/drivers/net/ethernet/3com/Makefile @@ -3,5 +3,6 @@ # Makefile for the 3Com Ethernet device drivers # +obj-$(CONFIG_EL3) += 3c509.o obj-$(CONFIG_VORTEX) += 3c59x.o obj-$(CONFIG_TYPHOON) += typhoon.o -- cgit v1.2.3 From 029a6b3a14bf02e6f59ce6ecd10f9d003334c612 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 20 May 2026 12:18:53 +0100 Subject: ethernet: 3c509: Fix AUI transceiver type selection The transceiver type is held in bits 15:14 of the Address Configuration Register, with the values of 0b00, 0b01, and 0b11 denoting TP, AUI, and BNC types respectively. Therefore switching from BNC to AUI requires bits to be cleared before setting bit 14 or the setting won't change. NB this has always been wrong ever since this code was added in 2.5.42. Signed-off-by: Maciej W. Rozycki Link: https://patch.msgid.link/alpine.DEB.2.21.2605201205160.1450@angie.orcam.me.uk Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/3com/3c509.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c index fb68339e1511..67b9a3f4de5e 100644 --- a/drivers/net/ethernet/3com/3c509.c +++ b/drivers/net/ethernet/3com/3c509.c @@ -1099,6 +1099,7 @@ el3_netdev_set_ecmd(struct net_device *dev, dev->if_port = 0; break; case PORT_AUI: + tmp &= ~(3<<14); tmp |= (1<<14); dev->if_port = 1; break; -- cgit v1.2.3 From 240117bb51b95ce93ec28c7c9439c9a87d7b120c Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 20 May 2026 12:18:57 +0100 Subject: ethernet: 3c509: Add GPL 2.0 SPDX license identifier This driver has landed with Linux 0.99.13k, which was covered by the GNU General Public License version 2, and no further conditions as to licensing terms have been specified within the copyright notice included with the driver itself. Signed-off-by: Maciej W. Rozycki Link: https://patch.msgid.link/alpine.DEB.2.21.2605201206370.1450@angie.orcam.me.uk Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/3com/3c509.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c index 67b9a3f4de5e..6ebd3358e31b 100644 --- a/drivers/net/ethernet/3com/3c509.c +++ b/drivers/net/ethernet/3com/3c509.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* 3c509.c: A 3c509 EtherLink3 ethernet driver for linux. */ /* Written 1993-2000 by Donald Becker. -- cgit v1.2.3 From 75756cb4b2aa148816b32d7d40c1f79f9a11eef6 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 20 May 2026 12:19:02 +0100 Subject: ethernet: 3c509: Update documentation to match MAINTAINERS There has been apparently a single message only ever publicly posted by David Ruggiero, back in 2002, which added this documentation piece among others, and MAINTAINERS was never updated accordingly. It is therefore doubtful that his maintainer status has actually come into effect. Just replace the reference then so as not to confuse people. Signed-off-by: Maciej W. Rozycki Link: https://patch.msgid.link/alpine.DEB.2.21.2605201207380.1450@angie.orcam.me.uk Signed-off-by: Jakub Kicinski --- Documentation/networking/device_drivers/ethernet/3com/3c509.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/networking/device_drivers/ethernet/3com/3c509.rst b/Documentation/networking/device_drivers/ethernet/3com/3c509.rst index 47f706bacdd9..a8c5e5e6841d 100644 --- a/Documentation/networking/device_drivers/ethernet/3com/3c509.rst +++ b/Documentation/networking/device_drivers/ethernet/3com/3c509.rst @@ -12,7 +12,7 @@ release 1.0 28 February 2002 Current maintainer (corrections to): - David Ruggiero + Maciej W. Rozycki Introduction ============ -- cgit v1.2.3 From 014767c709a44b4e0a0bf70ee9101fb73f4e288b Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Wed, 20 May 2026 12:19:06 +0100 Subject: ethernet: 3c509: Fix most coding style issues Update the driver for our current coding style according to output from `checkpatch.pl' and manual code review, where no change to binary code results, as indicated by `objdump -dr'. Exceptions are as follows: - incomplete reverse xmas tree in set_multicast_list(), as that would change binary output, - referring el3_start_xmit() verbatim rather than via `__func__' with pr_debug(), likewise, - a bunch of pr_cont() calls, likewise, - a long udelay() call in el3_netdev_set_ecmd() made under a spinlock, likewise plus it's not eligible for conversion to a sleep in the first place, - a blank line at the start of a block in el3_interrupt(), to improve readability where the first statement would otherwise visually merge with the controlling expression of the enclosing `while' statement. These issues are benign and depending on circumstances may be adressed with suitable code refactoring later on. Signed-off-by: Maciej W. Rozycki Link: https://patch.msgid.link/alpine.DEB.2.21.2605201208280.1450@angie.orcam.me.uk Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/3com/3c509.c | 845 +++++++++++++++++++++----------------- 1 file changed, 469 insertions(+), 376 deletions(-) diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c index 6ebd3358e31b..f23be7425daf 100644 --- a/drivers/net/ethernet/3com/3c509.c +++ b/drivers/net/ethernet/3com/3c509.c @@ -1,94 +1,99 @@ // SPDX-License-Identifier: GPL-2.0 /* 3c509.c: A 3c509 EtherLink3 ethernet driver for linux. */ /* - Written 1993-2000 by Donald Becker. - - Copyright 1994-2000 by Donald Becker. - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - - This driver is for the 3Com EtherLinkIII series. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Known limitations: - Because of the way 3c509 ISA detection works it's difficult to predict - a priori which of several ISA-mode cards will be detected first. - - This driver does not use predictive interrupt mode, resulting in higher - packet latency but lower overhead. If interrupts are disabled for an - unusually long time it could also result in missed packets, but in - practice this rarely happens. - - - FIXES: - Alan Cox: Removed the 'Unexpected interrupt' bug. - Michael Meskes: Upgraded to Donald Becker's version 1.07. - Alan Cox: Increased the eeprom delay. Regardless of - what the docs say some people definitely - get problems with lower (but in card spec) - delays - v1.10 4/21/97 Fixed module code so that multiple cards may be detected, - other cleanups. -djb - Andrea Arcangeli: Upgraded to Donald Becker's version 1.12. - Rick Payne: Fixed SMP race condition - v1.13 9/8/97 Made 'max_interrupt_work' an insmod-settable variable -djb - v1.14 10/15/97 Avoided waiting..discard message for fast machines -djb - v1.15 1/31/98 Faster recovery for Tx errors. -djb - v1.16 2/3/98 Different ID port handling to avoid sound cards. -djb - v1.18 12Mar2001 Andrew Morton - - Avoid bogus detect of 3c590's (Andrzej Krzysztofowicz) - - Reviewed against 1.18 from scyld.com - v1.18a 17Nov2001 Jeff Garzik - - ethtool support - v1.18b 1Mar2002 Zwane Mwaikambo - - Power Management support - v1.18c 1Mar2002 David Ruggiero - - Full duplex support - v1.19 16Oct2002 Zwane Mwaikambo - - Additional ethtool features - v1.19a 28Oct2002 Davud Ruggiero - - Increase *read_eeprom udelay to workaround oops with 2 cards. - v1.19b 08Nov2002 Marc Zyngier - - Introduce driver model for EISA cards. - v1.20 04Feb2008 Ondrej Zary - - convert to isa_driver and pnp_driver and some cleanups -*/ + * Written 1993-2000 by Donald Becker. + * + * Copyright 1994-2000 by Donald Becker. + * Copyright 1993 United States Government as represented by the + * Director, National Security Agency. This software may be used and + * distributed according to the terms of the GNU General Public License, + * incorporated herein by reference. + * + * This driver is for the 3Com EtherLinkIII series. + * + * The author may be reached as becker@scyld.com, or C/O + * Scyld Computing Corporation + * 410 Severn Ave., Suite 210 + * Annapolis MD 21403 + * + * Known limitations: + * Because of the way 3c509 ISA detection works it's difficult to predict + * a priori which of several ISA-mode cards will be detected first. + * + * This driver does not use predictive interrupt mode, resulting in higher + * packet latency but lower overhead. If interrupts are disabled for an + * unusually long time it could also result in missed packets, but in + * practice this rarely happens. + * + * + * FIXES: + * Alan Cox: Removed the 'Unexpected interrupt' bug. + * Michael Meskes: Upgraded to Donald Becker's version 1.07. + * Alan Cox: Increased the eeprom delay. Regardless of + * what the docs say some people definitely + * get problems with lower (but in card spec) + * delays. + * v1.10 4/21/97 Fixed module code so that multiple cards may be + * detected, other cleanups. -djb + * Andrea Arcangeli: Upgraded to Donald Becker's version 1.12. + * Rick Payne: Fixed SMP race condition. + * v1.13 9/8/97 Made 'max_interrupt_work' an insmod-settable + * variable. -djb + * v1.14 10/15/97 Avoided waiting..discard message for fast + * machines. -djb + * v1.15 1/31/98 Faster recovery for Tx errors. -djb + * v1.16 2/3/98 Different ID port handling to avoid sound + * cards. -djb + * v1.18 12Mar2001 Andrew Morton + * - Avoid bogus detect of 3c590's (Andrzej Krzysztofowicz) + * - Reviewed against 1.18 from scyld.com + * v1.18a 17Nov2001 Jeff Garzik + * - ethtool support. + * v1.18b 1Mar2002 Zwane Mwaikambo + * - Power Management support. + * v1.18c 1Mar2002 David Ruggiero + * - Full duplex support. + * v1.19 16Oct2002 Zwane Mwaikambo + * - Additional ethtool features. + * v1.19a 28Oct2002 David Ruggiero + * - Increase *read_eeprom udelay to workaround oops with + * 2 cards. + * v1.19b 08Nov2002 Marc Zyngier + * - Introduce driver model for EISA cards. + * v1.20 04Feb2008 Ondrej Zary + * - convert to isa_driver and pnp_driver and some + * cleanups. + */ #define DRV_NAME "3c509" /* A few values that may be tweaked. */ /* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (400*HZ/1000) +#define TX_TIMEOUT (400 * HZ / 1000) -#include -#include -#include -#include -#include +#include +#include /* for udelay() */ +#include +#include #include +#include +#include #include -#include #include +#include +#include +#include +#include +#include #include -#include #include +#include #include -#include /* for udelay() */ #include -#include -#include -#include -#include - +#include #include -#include + #include #ifdef EL3_DEBUG @@ -98,14 +103,15 @@ static int el3_debug = 2; #endif /* Used to do a global count of all the cards in the system. Must be - * a global variable so that the eisa probe routines can increment - * it */ -static int el3_cards = 0; + * a global variable so that the eisa probe routines can increment it. + */ +static int el3_cards; #define EL3_MAX_CARDS 8 /* To minimize the size of the driver source I only define operating - constants if they are used several times. You'll need the manual - anyway if you want to understand driver details. */ + * constants if they are used several times. You'll need the manual + * anyway if you want to understand driver details. + */ /* Offsets from base I/O address. */ #define EL3_DATA 0x00 #define EL3_CMD 0x0e @@ -114,60 +120,90 @@ static int el3_cards = 0; #define EL3_IO_EXTENT 16 -#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD) - +#define EL3WINDOW(win_num) outw(SELECT_WINDOW + (win_num), ioaddr + EL3_CMD) /* The top five bits written to EL3_CMD are a command, the lower - 11 bits are the parameter, if applicable. */ + * 11 bits are the parameter, if applicable. + */ enum c509cmd { - TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11, - RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11, - TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11, - FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11, - SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11, - SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11, - StatsDisable = 22<<11, StopCoax = 23<<11, PowerUp = 27<<11, - PowerDown = 28<<11, PowerAuto = 29<<11}; + TOTAL_RESET = 0 << 11, + SELECT_WINDOW = 1 << 11, + START_COAX = 2 << 11, + RX_DISABLE = 3 << 11, + RX_ENABLE = 4 << 11, + RX_RESET = 5 << 11, + RX_DISCARD = 8 << 11, + TX_ENABLE = 9 << 11, + TX_DISABLE = 10 << 11, + TX_RESET = 11 << 11, + FAKE_INTR = 12 << 11, + ACK_INTR = 13 << 11, + SET_INTR_ENB = 14 << 11, + SET_STATUS_ENB = 15 << 11, + SET_RX_FILTER = 16 << 11, + SET_RX_THRESHOLD = 17 << 11, + SET_TX_THRESHOLD = 18 << 11, + SET_TX_START = 19 << 11, + STATS_ENABLE = 21 << 11, + STATS_DISABLE = 22 << 11, + STOP_COAX = 23 << 11, + POWER_UP = 27 << 11, + POWER_DOWN = 28 << 11, + POWER_AUTO = 29 << 11, +}; enum c509status { - IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004, - TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020, - IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000, }; + INT_LATCH = 0x0001, + ADAPTER_FAILURE = 0x0002, + TX_COMPLETE = 0x0004, + TX_AVAILABLE = 0x0008, + RX_COMPLETE = 0x0010, + RX_EARLY = 0x0020, + INT_REQ = 0x0040, + STATS_FULL = 0x0080, + CMD_BUSY = 0x1000, +}; -/* The SetRxFilter command accepts the following classes: */ -enum RxFilter { - RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 }; +/* The SET_RX_FILTER command accepts the following classes: */ +enum rx_filter { + RX_STATION = 1, + RX_MULTICAST = 2, + RX_BROADCAST = 4, + RX_PROM = 8, +}; /* Register window 1 offsets, the window used in normal operation. */ #define TX_FIFO 0x00 #define RX_FIFO 0x00 -#define RX_STATUS 0x08 -#define TX_STATUS 0x0B -#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */ - -#define WN0_CONF_CTRL 0x04 /* Window 0: Configuration control register */ -#define WN0_ADDR_CONF 0x06 /* Window 0: Address configuration register */ -#define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */ -#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */ -#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ -#define WN4_NETDIAG 0x06 /* Window 4: Net diagnostic */ -#define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback") */ +#define RX_STATUS 0x08 +#define TX_STATUS 0x0B +#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */ + +#define WN0_CONF_CTRL 0x04 /* Window 0: Configuration control register. */ +#define WN0_ADDR_CONF 0x06 /* Window 0: Address configuration register. */ +#define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */ +#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */ +#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */ +#define WN4_NETDIAG 0x06 /* Window 4: Net diagnostic. */ +#define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback"). */ /* * Must be a power of two (we use a binary and in the - * circular queue) + * circular queue). */ #define SKB_QUEUE_SIZE 64 enum el3_cardtype { EL3_ISA, EL3_PNP, EL3_EISA }; struct el3_private { + /* for device access */ spinlock_t lock; /* skb send-queue */ int head, size; struct sk_buff *queue[SKB_QUEUE_SIZE]; enum el3_cardtype type; }; + static int id_port; static int current_tag; static struct net_device *el3_devs[EL3_MAX_CARDS]; @@ -193,7 +229,7 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev); static int el3_rx(struct net_device *dev); static int el3_close(struct net_device *dev); static void set_multicast_list(struct net_device *dev); -static void el3_tx_timeout (struct net_device *dev, unsigned int txqueue); +static void el3_tx_timeout(struct net_device *dev, unsigned int txqueue); static void el3_down(struct net_device *dev); static void el3_up(struct net_device *dev); static const struct ethtool_ops ethtool_ops; @@ -205,24 +241,23 @@ static int el3_resume(struct device *); #define el3_resume NULL #endif - -/* generic device remove for all device types */ -static int el3_device_remove (struct device *device); +/* Generic device remove for all device types. */ +static int el3_device_remove(struct device *device); #ifdef CONFIG_NET_POLL_CONTROLLER static void el3_poll_controller(struct net_device *dev); #endif -/* Return 0 on success, 1 on error, 2 when found already detected PnP card */ +/* Return 0 on success, 1 on error, 2 when found already detected PnP card. */ static int el3_isa_id_sequence(__be16 *phys_addr) { short lrs_state = 0xff; int i; /* ISA boards are detected by sending the ID sequence to the - ID_PORT. We find cards past the first by setting the 'current_tag' - on cards as they are found. Cards with their tag set will not - respond to subsequent ID sequences. */ - + * ID_PORT. We find cards past the first by setting the 'current_tag' + * on cards as they are found. Cards with their tag set will not + * respond to subsequent ID sequences. + */ outb(0x00, id_port); outb(0x00, id_port); for (i = 0; i < 255; i++) { @@ -238,24 +273,33 @@ static int el3_isa_id_sequence(__be16 *phys_addr) if (id_read_eeprom(7) != 0x6d50) return 1; /* Read in EEPROM data, which does contention-select. - Only the lowest address board will stay "on-line". - 3Com got the byte order backwards. */ + * Only the lowest address board will stay "on-line". + * 3Com got the byte order backwards. + */ for (i = 0; i < 3; i++) phys_addr[i] = htons(id_read_eeprom(i)); #ifdef CONFIG_PNP if (!nopnp) { /* The ISA PnP 3c509 cards respond to the ID sequence too. - This check is needed in order not to register them twice. */ + * This check is needed in order not to register them twice. + */ for (i = 0; i < el3_cards; i++) { struct el3_private *lp = netdev_priv(el3_devs[i]); + if (lp->type == EL3_PNP && - ether_addr_equal((u8 *)phys_addr, el3_devs[i]->dev_addr)) { + ether_addr_equal((u8 *)phys_addr, + el3_devs[i]->dev_addr)) { if (el3_debug > 3) pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n", - phys_addr[0] & 0xff, phys_addr[0] >> 8, - phys_addr[1] & 0xff, phys_addr[1] >> 8, - phys_addr[2] & 0xff, phys_addr[2] >> 8); - /* Set the adaptor tag so that the next card can be found. */ + phys_addr[0] & 0xff, + phys_addr[0] >> 8, + phys_addr[1] & 0xff, + phys_addr[1] >> 8, + phys_addr[2] & 0xff, + phys_addr[2] >> 8); + /* Set the adaptor tag so that the next card + * can be found. + */ outb(0xd0 + ++current_tag, id_port); return 2; } @@ -263,7 +307,6 @@ static int el3_isa_id_sequence(__be16 *phys_addr) } #endif /* CONFIG_PNP */ return 0; - } static void el3_dev_fill(struct net_device *dev, __be16 *phys_addr, int ioaddr, @@ -280,8 +323,8 @@ static void el3_dev_fill(struct net_device *dev, __be16 *phys_addr, int ioaddr, static int el3_isa_match(struct device *pdev, unsigned int ndev) { - struct net_device *dev; int ioaddr, isa_irq, if_port, err; + struct net_device *dev; unsigned int iobase; __be16 phys_addr[3]; @@ -335,8 +378,7 @@ static int el3_isa_match(struct device *pdev, unsigned int ndev) return 1; } -static void el3_isa_remove(struct device *pdev, - unsigned int ndev) +static void el3_isa_remove(struct device *pdev, unsigned int ndev) { el3_device_remove(pdev); dev_set_drvdata(pdev, NULL); @@ -384,6 +426,7 @@ static struct isa_driver el3_isa_driver = { .name = "3c509" }, }; + static int isa_registered; #ifdef CONFIG_PNP @@ -401,10 +444,10 @@ MODULE_DEVICE_TABLE(pnp, el3_pnp_ids); static int el3_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *id) { - short i; + struct net_device *dev = NULL; int ioaddr, irq, if_port; __be16 phys_addr[3]; - struct net_device *dev = NULL; + short i; int err; ioaddr = pnp_port_start(pdev, 0); @@ -464,6 +507,7 @@ static struct pnp_driver el3_pnp_driver = { .resume = el3_pnp_resume, #endif }; + static int pnp_registered; #endif /* CONFIG_PNP */ @@ -480,7 +524,7 @@ static const struct eisa_device_id el3_eisa_ids[] = { }; MODULE_DEVICE_TABLE(eisa, el3_eisa_ids); -static int el3_eisa_probe (struct device *device); +static int el3_eisa_probe(struct device *device); static struct eisa_driver el3_eisa_driver = { .id_table = el3_eisa_ids, @@ -492,17 +536,18 @@ static struct eisa_driver el3_eisa_driver = { .resume = el3_resume, } }; + static int eisa_registered; #endif static const struct net_device_ops netdev_ops = { - .ndo_open = el3_open, - .ndo_stop = el3_close, - .ndo_start_xmit = el3_start_xmit, - .ndo_get_stats = el3_get_stats, + .ndo_open = el3_open, + .ndo_stop = el3_close, + .ndo_start_xmit = el3_start_xmit, + .ndo_get_stats = el3_get_stats, .ndo_set_rx_mode = set_multicast_list, - .ndo_tx_timeout = el3_tx_timeout, - .ndo_set_mac_address = eth_mac_addr, + .ndo_tx_timeout = el3_tx_timeout, + .ndo_set_mac_address = eth_mac_addr, .ndo_validate_addr = eth_validate_addr, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = el3_poll_controller, @@ -511,11 +556,11 @@ static const struct net_device_ops netdev_ops = { static int el3_common_init(struct net_device *dev) { - struct el3_private *lp = netdev_priv(dev); - int err; - static const char * const if_names[] = { + static const char *const if_names[] = { "10baseT", "AUI", "undefined", "BNC" }; + struct el3_private *lp = netdev_priv(dev); + int err; spin_lock_init(&lp->lock); @@ -534,56 +579,55 @@ static int el3_common_init(struct net_device *dev) err = register_netdev(dev); if (err) { pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n", - dev->base_addr, dev->irq); + dev->base_addr, dev->irq); release_region(dev->base_addr, EL3_IO_EXTENT); return err; } pr_info("%s: 3c5x9 found at %#3.3lx, %s port, address %pM, IRQ %d.\n", - dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)], - dev->dev_addr, dev->irq); + dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)], + dev->dev_addr, dev->irq); return 0; - } -static void el3_common_remove (struct net_device *dev) +static void el3_common_remove(struct net_device *dev) { - unregister_netdev (dev); + unregister_netdev(dev); release_region(dev->base_addr, EL3_IO_EXTENT); - free_netdev (dev); + free_netdev(dev); } #ifdef CONFIG_EISA static int el3_eisa_probe(struct device *device) { - short i; - int ioaddr, irq, if_port; - __be16 phys_addr[3]; struct net_device *dev = NULL; struct eisa_device *edev; + int ioaddr, irq, if_port; + __be16 phys_addr[3]; + short i; int err; /* Yeepee, The driver framework is calling us ! */ - edev = to_eisa_device (device); + edev = to_eisa_device(device); ioaddr = edev->base_addr; if (!request_region(ioaddr, EL3_IO_EXTENT, "3c579-eisa")) return -EBUSY; /* Change the register set to the configuration window 0. */ - outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD); + outw(SELECT_WINDOW | 0, ioaddr + 0xC80 + EL3_CMD); irq = inw(ioaddr + WN0_IRQ) >> 12; - if_port = inw(ioaddr + 6)>>14; + if_port = inw(ioaddr + 6) >> 14; for (i = 0; i < 3; i++) phys_addr[i] = htons(read_eeprom(ioaddr, i)); /* Restore the "Product ID" to the EEPROM read register. */ read_eeprom(ioaddr, 3); - dev = alloc_etherdev(sizeof (struct el3_private)); - if (dev == NULL) { + dev = alloc_etherdev(sizeof(struct el3_private)); + if (!dev) { release_region(ioaddr, EL3_IO_EXTENT); return -ENOMEM; } @@ -591,11 +635,11 @@ static int el3_eisa_probe(struct device *device) SET_NETDEV_DEV(dev, device); el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_EISA); - eisa_set_drvdata (edev, dev); + eisa_set_drvdata(edev, dev); err = el3_common_init(dev); if (err) { - eisa_set_drvdata (edev, NULL); + eisa_set_drvdata(edev, NULL); free_netdev(dev); return err; } @@ -607,25 +651,27 @@ static int el3_eisa_probe(struct device *device) /* This remove works for all device types. * - * The net dev must be stored in the driver data field */ + * The net dev must be stored in the driver data field. + */ static int el3_device_remove(struct device *device) { struct net_device *dev; dev = dev_get_drvdata(device); - el3_common_remove (dev); + el3_common_remove(dev); return 0; } /* Read a word from the EEPROM using the regular EEPROM access register. - Assume that we are in register window zero. + * Assume that we are in register window zero. */ static ushort read_eeprom(int ioaddr, int index) { outw(EEPROM_READ + index, ioaddr + 10); - /* Pause for at least 162 us. for the read to take place. - Some chips seem to require much longer */ + /* Pause for at least 162 us for the read to take place. + * Some chips seem to require much longer. + */ mdelay(2); return inw(ioaddr + 12); } @@ -635,12 +681,14 @@ static ushort id_read_eeprom(int index) { int bit, word = 0; - /* Issue read command, and pause for at least 162 us. for it to complete. - Assume extra-fast 16Mhz bus. */ + /* Issue read command, and pause for at least 162 us for it to + * complete. Assume extra-fast 16MHz bus. + */ outb(EEPROM_READ + index, id_port); - /* Pause for at least 162 us. for the read to take place. */ - /* Some chips seem to require much longer */ + /* Pause for at least 162 us for the read to take place. + * Some chips seem to require much longer. + */ mdelay(4); for (bit = 15; bit >= 0; bit--) @@ -652,16 +700,14 @@ static ushort id_read_eeprom(int index) return word; } - -static int -el3_open(struct net_device *dev) +static int el3_open(struct net_device *dev) { int ioaddr = dev->base_addr; int i; - outw(TxReset, ioaddr + EL3_CMD); - outw(RxReset, ioaddr + EL3_CMD); - outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD); + outw(TX_RESET, ioaddr + EL3_CMD); + outw(RX_RESET, ioaddr + EL3_CMD); + outw(SET_STATUS_ENB | 0x00, ioaddr + EL3_CMD); i = request_irq(dev->irq, el3_interrupt, 0, dev->name, dev); if (i) @@ -669,20 +715,20 @@ el3_open(struct net_device *dev) EL3WINDOW(0); if (el3_debug > 3) - pr_debug("%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name, - dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS)); + pr_debug("%s: Opening, IRQ %d status@%x %4.4x.\n", + dev->name, dev->irq, + ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS)); el3_up(dev); if (el3_debug > 3) pr_debug("%s: Opened 3c509 IRQ %d status %4.4x.\n", - dev->name, dev->irq, inw(ioaddr + EL3_STATUS)); + dev->name, dev->irq, inw(ioaddr + EL3_STATUS)); return 0; } -static void -el3_tx_timeout (struct net_device *dev, unsigned int txqueue) +static void el3_tx_timeout(struct net_device *dev, unsigned int txqueue) { int ioaddr = dev->base_addr; @@ -693,33 +739,31 @@ el3_tx_timeout (struct net_device *dev, unsigned int txqueue) dev->stats.tx_errors++; netif_trans_update(dev); /* prevent tx timeout */ /* Issue TX_RESET and TX_START commands. */ - outw(TxReset, ioaddr + EL3_CMD); - outw(TxEnable, ioaddr + EL3_CMD); + outw(TX_RESET, ioaddr + EL3_CMD); + outw(TX_ENABLE, ioaddr + EL3_CMD); netif_wake_queue(dev); } - -static netdev_tx_t -el3_start_xmit(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t el3_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct el3_private *lp = netdev_priv(dev); int ioaddr = dev->base_addr; unsigned long flags; - netif_stop_queue (dev); + netif_stop_queue(dev); dev->stats.tx_bytes += skb->len; if (el3_debug > 4) { pr_debug("%s: el3_start_xmit(length = %u) called, status %4.4x.\n", - dev->name, skb->len, inw(ioaddr + EL3_STATUS)); + dev->name, skb->len, inw(ioaddr + EL3_STATUS)); } /* * We lock the driver against other processors. Note * we don't need to lock versus the IRQ as we suspended * that. This means that we lose the ability to take * an RX during a TX upload. That sucks a bit with SMP - * on an original 3c509 (2K buffer) + * on an original 3c509 (2K buffer). * * Using disable_irq stops us crapping on other * time sensitive devices. @@ -733,39 +777,43 @@ el3_start_xmit(struct sk_buff *skb, struct net_device *dev) /* ... and the packet rounded to a doubleword. */ outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2); - if (inw(ioaddr + TX_FREE) > 1536) + if (inw(ioaddr + TX_FREE) > 1536) { netif_start_queue(dev); - else + } else { /* Interrupt us when the FIFO has room for max-sized packet. */ - outw(SetTxThreshold + 1536, ioaddr + EL3_CMD); + outw(SET_TX_THRESHOLD + 1536, ioaddr + EL3_CMD); + } spin_unlock_irqrestore(&lp->lock, flags); - dev_consume_skb_any (skb); + dev_consume_skb_any(skb); /* Clear the Tx status stack. */ { short tx_status; int i = 4; - while (--i > 0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) { - if (tx_status & 0x38) dev->stats.tx_aborted_errors++; - if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD); - if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD); - outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ + while (--i > 0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) { + if (tx_status & 0x38) + dev->stats.tx_aborted_errors++; + if (tx_status & 0x30) + outw(TX_RESET, ioaddr + EL3_CMD); + if (tx_status & 0x3C) + outw(TX_ENABLE, ioaddr + EL3_CMD); + /* Pop the status stack. */ + outb(0x00, ioaddr + TX_STATUS); } } return NETDEV_TX_OK; } /* The EL3 interrupt handler. */ -static irqreturn_t -el3_interrupt(int irq, void *dev_id) +static irqreturn_t el3_interrupt(int irq, void *dev_id) { struct net_device *dev = dev_id; + int i = max_interrupt_work; struct el3_private *lp; int ioaddr, status; - int i = max_interrupt_work; lp = netdev_priv(dev); spin_lock(&lp->lock); @@ -778,70 +826,89 @@ el3_interrupt(int irq, void *dev_id) } while ((status = inw(ioaddr + EL3_STATUS)) & - (IntLatch | RxComplete | StatsFull)) { + (INT_LATCH | RX_COMPLETE | STATS_FULL)) { - if (status & RxComplete) + if (status & RX_COMPLETE) el3_rx(dev); - if (status & TxAvailable) { + if (status & TX_AVAILABLE) { if (el3_debug > 5) pr_debug(" TX room bit was handled.\n"); /* There's room in the FIFO for a full-sized packet. */ - outw(AckIntr | TxAvailable, ioaddr + EL3_CMD); - netif_wake_queue (dev); + outw(ACK_INTR | TX_AVAILABLE, ioaddr + EL3_CMD); + netif_wake_queue(dev); } - if (status & (AdapterFailure | RxEarly | StatsFull | TxComplete)) { + if (status & + (ADAPTER_FAILURE | RX_EARLY | STATS_FULL | TX_COMPLETE)) { /* Handle all uncommon interrupts. */ - if (status & StatsFull) /* Empty statistics. */ + if (status & STATS_FULL) { + /* Empty statistics. */ update_stats(dev); - if (status & RxEarly) { /* Rx early is unused. */ + } + if (status & RX_EARLY) { + /* Rx early is unused. */ el3_rx(dev); - outw(AckIntr | RxEarly, ioaddr + EL3_CMD); + outw(ACK_INTR | RX_EARLY, ioaddr + EL3_CMD); } - if (status & TxComplete) { /* Really Tx error. */ + if (status & TX_COMPLETE) { + /* Really Tx error. */ short tx_status; int i = 4; - while (--i>0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) { - if (tx_status & 0x38) dev->stats.tx_aborted_errors++; - if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD); - if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD); - outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ + while (--i > 0 && + ((tx_status = inb(ioaddr + TX_STATUS)) + > 0)) { + if (tx_status & 0x38) + dev->stats.tx_aborted_errors++; + if (tx_status & 0x30) + outw(TX_RESET, + ioaddr + EL3_CMD); + if (tx_status & 0x3C) + outw(TX_ENABLE, + ioaddr + EL3_CMD); + /* Pop the status stack. */ + outb(0x00, ioaddr + TX_STATUS); } } - if (status & AdapterFailure) { - /* Adapter failure requires Rx reset and reinit. */ - outw(RxReset, ioaddr + EL3_CMD); + if (status & ADAPTER_FAILURE) { + /* Adapter failure requires Rx reset + * and reinit. + */ + outw(RX_RESET, ioaddr + EL3_CMD); /* Set the Rx filter to the current state. */ - outw(SetRxFilter | RxStation | RxBroadcast - | (dev->flags & IFF_ALLMULTI ? RxMulticast : 0) - | (dev->flags & IFF_PROMISC ? RxProm : 0), - ioaddr + EL3_CMD); - outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */ - outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD); + outw((SET_RX_FILTER | RX_STATION | + RX_BROADCAST | + (dev->flags & IFF_ALLMULTI ? + RX_MULTICAST : 0) | + (dev->flags & IFF_PROMISC ? + RX_PROM : 0)), + ioaddr + EL3_CMD); + /* Re-enable the receiver. */ + outw(RX_ENABLE, ioaddr + EL3_CMD); + outw(ACK_INTR | ADAPTER_FAILURE, + ioaddr + EL3_CMD); } } if (--i < 0) { pr_err("%s: Infinite loop in interrupt, status %4.4x.\n", - dev->name, status); + dev->name, status); /* Clear all interrupts. */ - outw(AckIntr | 0xFF, ioaddr + EL3_CMD); + outw(ACK_INTR | 0xFF, ioaddr + EL3_CMD); break; } /* Acknowledge the IRQ. */ - outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); /* Ack IRQ */ + outw(ACK_INTR | INT_REQ | INT_LATCH, ioaddr + EL3_CMD); } if (el3_debug > 4) { pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, - inw(ioaddr + EL3_STATUS)); + inw(ioaddr + EL3_STATUS)); } spin_unlock(&lp->lock); return IRQ_HANDLED; } - #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling receive - used by netconsole and other diagnostic tools @@ -855,28 +922,23 @@ static void el3_poll_controller(struct net_device *dev) } #endif -static struct net_device_stats * -el3_get_stats(struct net_device *dev) +static struct net_device_stats *el3_get_stats(struct net_device *dev) { struct el3_private *lp = netdev_priv(dev); unsigned long flags; - /* - * This is fast enough not to bother with disable IRQ - * stuff. - */ - + /* This is fast enough not to bother with disable IRQ stuff. */ spin_lock_irqsave(&lp->lock, flags); update_stats(dev); spin_unlock_irqrestore(&lp->lock, flags); return &dev->stats; } -/* Update statistics. We change to register window 6, so this should be run - single-threaded if the device is active. This is expected to be a rare - operation, and it's simpler for the rest of the driver to assume that - window 1 is always valid rather than use a special window-state variable. - */ +/* Update statistics. We change to register window 6, so this should be run + * single-threaded if the device is active. This is expected to be a rare + * operation, and it's simpler for the rest of the driver to assume that + * window 1 is always valid rather than use a special window-state variable. + */ static void update_stats(struct net_device *dev) { int ioaddr = dev->base_addr; @@ -884,10 +946,10 @@ static void update_stats(struct net_device *dev) if (el3_debug > 5) pr_debug(" Updating the statistics.\n"); /* Turn off statistics updates while reading. */ - outw(StatsDisable, ioaddr + EL3_CMD); + outw(STATS_DISABLE, ioaddr + EL3_CMD); /* Switch to the stats window, and read everything. */ EL3WINDOW(6); - dev->stats.tx_carrier_errors += inb(ioaddr + 0); + dev->stats.tx_carrier_errors += inb(ioaddr + 0); dev->stats.tx_heartbeat_errors += inb(ioaddr + 1); /* Multiple collisions. */ inb(ioaddr + 2); dev->stats.collisions += inb(ioaddr + 3); @@ -901,31 +963,42 @@ static void update_stats(struct net_device *dev) /* Back to window 1, and turn statistics back on. */ EL3WINDOW(1); - outw(StatsEnable, ioaddr + EL3_CMD); + outw(STATS_ENABLE, ioaddr + EL3_CMD); } -static int -el3_rx(struct net_device *dev) +static int el3_rx(struct net_device *dev) { int ioaddr = dev->base_addr; short rx_status; if (el3_debug > 5) pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n", - inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS)); + inw(ioaddr + EL3_STATUS), inw(ioaddr + RX_STATUS)); while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) { - if (rx_status & 0x4000) { /* Error, update stats. */ + if (rx_status & 0x4000) { + /* Error, update stats. */ short error = rx_status & 0x3800; - outw(RxDiscard, ioaddr + EL3_CMD); + outw(RX_DISCARD, ioaddr + EL3_CMD); dev->stats.rx_errors++; switch (error) { - case 0x0000: dev->stats.rx_over_errors++; break; - case 0x0800: dev->stats.rx_length_errors++; break; - case 0x1000: dev->stats.rx_frame_errors++; break; - case 0x1800: dev->stats.rx_length_errors++; break; - case 0x2000: dev->stats.rx_frame_errors++; break; - case 0x2800: dev->stats.rx_crc_errors++; break; + case 0x0000: + dev->stats.rx_over_errors++; + break; + case 0x0800: + dev->stats.rx_length_errors++; + break; + case 0x1000: + dev->stats.rx_frame_errors++; + break; + case 0x1800: + dev->stats.rx_length_errors++; + break; + case 0x2000: + dev->stats.rx_frame_errors++; + break; + case 0x2800: + dev->stats.rx_crc_errors++; break; } } else { short pkt_len = rx_status & 0x7ff; @@ -934,49 +1007,51 @@ el3_rx(struct net_device *dev) skb = netdev_alloc_skb(dev, pkt_len + 5); if (el3_debug > 4) pr_debug("Receiving packet size %d status %4.4x.\n", - pkt_len, rx_status); - if (skb != NULL) { - skb_reserve(skb, 2); /* Align IP on 16 byte */ - - /* 'skb->data' points to the start of sk_buff data area. */ - insl(ioaddr + RX_FIFO, skb_put(skb,pkt_len), - (pkt_len + 3) >> 2); - - outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */ - skb->protocol = eth_type_trans(skb,dev); + pkt_len, rx_status); + if (skb) { + /* Align IP on 16 byte. */ + skb_reserve(skb, 2); + + /* 'skb->data' points to the start of sk_buff + * data area. + */ + insl(ioaddr + RX_FIFO, skb_put(skb, pkt_len), + (pkt_len + 3) >> 2); + + /* Pop top Rx packet. */ + outw(RX_DISCARD, ioaddr + EL3_CMD); + skb->protocol = eth_type_trans(skb, dev); netif_rx(skb); dev->stats.rx_bytes += pkt_len; dev->stats.rx_packets++; continue; } - outw(RxDiscard, ioaddr + EL3_CMD); + outw(RX_DISCARD, ioaddr + EL3_CMD); dev->stats.rx_dropped++; if (el3_debug) pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", - dev->name, pkt_len); + dev->name, pkt_len); } - inw(ioaddr + EL3_STATUS); /* Delay. */ + inw(ioaddr + EL3_STATUS); /* Delay. */ while (inw(ioaddr + EL3_STATUS) & 0x1000) pr_debug(" Waiting for 3c509 to discard packet, status %x.\n", - inw(ioaddr + EL3_STATUS) ); + inw(ioaddr + EL3_STATUS)); } return 0; } -/* - * Set or clear the multicast filter for this adaptor. - */ -static void -set_multicast_list(struct net_device *dev) +/* Set or clear the multicast filter for this adaptor. */ +static void set_multicast_list(struct net_device *dev) { - unsigned long flags; struct el3_private *lp = netdev_priv(dev); int ioaddr = dev->base_addr; int mc_count = netdev_mc_count(dev); + unsigned long flags; if (el3_debug > 1) { static int old; + if (old != mc_count) { old = mc_count; pr_debug("%s: Setting Rx mode to %d addresses.\n", @@ -984,23 +1059,24 @@ set_multicast_list(struct net_device *dev) } } spin_lock_irqsave(&lp->lock, flags); - if (dev->flags&IFF_PROMISC) { - outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm, - ioaddr + EL3_CMD); - } - else if (mc_count || (dev->flags&IFF_ALLMULTI)) { - outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast, ioaddr + EL3_CMD); + if (dev->flags & IFF_PROMISC) { + outw((SET_RX_FILTER | RX_STATION | RX_MULTICAST | + RX_BROADCAST | RX_PROM), + ioaddr + EL3_CMD); + } else if (mc_count || (dev->flags & IFF_ALLMULTI)) { + outw(SET_RX_FILTER | RX_STATION | RX_MULTICAST | RX_BROADCAST, + ioaddr + EL3_CMD); + } else { + outw(SET_RX_FILTER | RX_STATION | RX_BROADCAST, + ioaddr + EL3_CMD); } - else - outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); spin_unlock_irqrestore(&lp->lock, flags); } -static int -el3_close(struct net_device *dev) +static int el3_close(struct net_device *dev) { - int ioaddr = dev->base_addr; struct el3_private *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; if (el3_debug > 2) pr_debug("%s: Shutting down ethercard.\n", dev->name); @@ -1013,15 +1089,15 @@ el3_close(struct net_device *dev) if (lp->type != EL3_EISA) { /* But we explicitly zero the IRQ line select anyway. Don't do * it on EISA cards, it prevents the module from getting an - * IRQ after unload+reload... */ + * IRQ after unload+reload... + */ outw(0x0f00, ioaddr + WN0_IRQ); } return 0; } -static int -el3_link_ok(struct net_device *dev) +static int el3_link_ok(struct net_device *dev) { int ioaddr = dev->base_addr; u16 tmp; @@ -1029,18 +1105,18 @@ el3_link_ok(struct net_device *dev) EL3WINDOW(4); tmp = inw(ioaddr + WN4_MEDIA); EL3WINDOW(1); - return tmp & (1<<11); + return tmp & (1 << 11); } -static void -el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_link_ksettings *cmd) +static void el3_netdev_get_ecmd(struct net_device *dev, + struct ethtool_link_ksettings *cmd) { - u16 tmp; int ioaddr = dev->base_addr; u32 supported; + u16 tmp; EL3WINDOW(0); - /* obtain current transceiver via WN4_MEDIA? */ + /* Obtain current transceiver via WN4_MEDIA? */ tmp = inw(ioaddr + WN0_ADDR_CONF); switch (tmp >> 14) { case 0: @@ -1059,13 +1135,13 @@ el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_link_ksettings *cmd) cmd->base.duplex = DUPLEX_HALF; supported = 0; tmp = inw(ioaddr + WN0_CONF_CTRL); - if (tmp & (1<<13)) + if (tmp & (1 << 13)) supported |= SUPPORTED_AUI; - if (tmp & (1<<12)) + if (tmp & (1 << 12)) supported |= SUPPORTED_BNC; - if (tmp & (1<<9)) { + if (tmp & (1 << 9)) { supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full; /* hmm... */ + SUPPORTED_10baseT_Full; /* hmm... */ EL3WINDOW(4); tmp = inw(ioaddr + WN4_NETDIAG); if (tmp & FD_ENABLE) @@ -1078,17 +1154,15 @@ el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_link_ksettings *cmd) EL3WINDOW(1); } -static int -el3_netdev_set_ecmd(struct net_device *dev, - const struct ethtool_link_ksettings *cmd) +static int el3_netdev_set_ecmd(struct net_device *dev, + const struct ethtool_link_ksettings *cmd) { - u16 tmp; int ioaddr = dev->base_addr; + u16 tmp; if (cmd->base.speed != SPEED_10) return -EINVAL; - if ((cmd->base.duplex != DUPLEX_HALF) && - (cmd->base.duplex != DUPLEX_FULL)) + if (cmd->base.duplex != DUPLEX_HALF && cmd->base.duplex != DUPLEX_FULL) return -EINVAL; /* change XCVR type */ @@ -1096,16 +1170,16 @@ el3_netdev_set_ecmd(struct net_device *dev, tmp = inw(ioaddr + WN0_ADDR_CONF); switch (cmd->base.port) { case PORT_TP: - tmp &= ~(3<<14); + tmp &= ~(3 << 14); dev->if_port = 0; break; case PORT_AUI: - tmp &= ~(3<<14); - tmp |= (1<<14); + tmp &= ~(3 << 14); + tmp |= 1 << 14; dev->if_port = 1; break; case PORT_BNC: - tmp |= (3<<14); + tmp |= 3 << 14; dev->if_port = 3; break; default: @@ -1114,13 +1188,14 @@ el3_netdev_set_ecmd(struct net_device *dev, outw(tmp, ioaddr + WN0_ADDR_CONF); if (dev->if_port == 3) { - /* fire up the DC-DC convertor if BNC gets enabled */ + /* Fire up the DC-DC converter if BNC gets enabled. */ tmp = inw(ioaddr + WN0_ADDR_CONF); if (tmp & (3 << 14)) { - outw(StartCoax, ioaddr + EL3_CMD); + outw(START_COAX, ioaddr + EL3_CMD); udelay(800); - } else + } else { return -EIO; + } } EL3WINDOW(4); @@ -1135,7 +1210,8 @@ el3_netdev_set_ecmd(struct net_device *dev, return 0; } -static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +static void el3_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) { strscpy(info->driver, DRV_NAME, sizeof(info->driver)); } @@ -1193,41 +1269,41 @@ static const struct ethtool_ops ethtool_ops = { .set_link_ksettings = el3_set_link_ksettings, }; -static void -el3_down(struct net_device *dev) +static void el3_down(struct net_device *dev) { int ioaddr = dev->base_addr; netif_stop_queue(dev); /* Turn off statistics ASAP. We update lp->stats below. */ - outw(StatsDisable, ioaddr + EL3_CMD); + outw(STATS_DISABLE, ioaddr + EL3_CMD); /* Disable the receiver and transmitter. */ - outw(RxDisable, ioaddr + EL3_CMD); - outw(TxDisable, ioaddr + EL3_CMD); + outw(RX_DISABLE, ioaddr + EL3_CMD); + outw(TX_DISABLE, ioaddr + EL3_CMD); - if (dev->if_port == 3) + if (dev->if_port == 3) { /* Turn off thinnet power. Green! */ - outw(StopCoax, ioaddr + EL3_CMD); - else if (dev->if_port == 0) { - /* Disable link beat and jabber, if_port may change here next open(). */ + outw(STOP_COAX, ioaddr + EL3_CMD); + } else if (dev->if_port == 0) { + /* Disable link beat and jabber, if_port may change here next + * open(). + */ EL3WINDOW(4); outw(inw(ioaddr + WN4_MEDIA) & ~MEDIA_TP, ioaddr + WN4_MEDIA); } - outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); + outw(SET_INTR_ENB | 0x0000, ioaddr + EL3_CMD); update_stats(dev); } -static void -el3_up(struct net_device *dev) +static void el3_up(struct net_device *dev) { - int i, sw_info, net_diag; int ioaddr = dev->base_addr; + int i, sw_info, net_diag; - /* Activating the board required and does no harm otherwise */ + /* Activating the board required and does no harm otherwise. */ outw(0x0001, ioaddr + 4); /* Set the IRQ line. */ @@ -1239,51 +1315,67 @@ el3_up(struct net_device *dev) for (i = 0; i < 6; i++) outb(dev->dev_addr[i], ioaddr + i); - if ((dev->if_port & 0x03) == 3) /* BNC interface */ - /* Start the thinnet transceiver. We should really wait 50ms...*/ - outw(StartCoax, ioaddr + EL3_CMD); - else if ((dev->if_port & 0x03) == 0) { /* 10baseT interface */ - /* Combine secondary sw_info word (the adapter level) and primary - sw_info word (duplex setting plus other useless bits) */ + if ((dev->if_port & 0x03) == 3) { + /* BNC interface */ + + /* Start the thinnet transceiver. We should really wait + * 50ms... + */ + outw(START_COAX, ioaddr + EL3_CMD); + } else if ((dev->if_port & 0x03) == 0) { + /* 10baseT interface */ + + /* Combine secondary sw_info word (the adapter level) and + * primary sw_info word (duplex setting plus other useless + * bits). + */ EL3WINDOW(0); sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) | - (read_eeprom(ioaddr, 0x0d) & 0xBff0); + (read_eeprom(ioaddr, 0x0d) & 0xBff0); EL3WINDOW(4); net_diag = inw(ioaddr + WN4_NETDIAG); - net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */ + /* Temporarily assume full-duplex will be set. */ + net_diag = (net_diag | FD_ENABLE); pr_info("%s: ", dev->name); switch (dev->if_port & 0x0c) { - case 12: - /* force full-duplex mode if 3c5x9b */ - if (sw_info & 0x000f) { - pr_cont("Forcing 3c5x9b full-duplex mode"); - break; - } - fallthrough; - case 8: - /* set full-duplex mode based on eeprom config setting */ - if ((sw_info & 0x000f) && (sw_info & 0x8000)) { - pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)"); - break; - } - fallthrough; - default: - /* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */ - pr_cont("Setting 3c5x9/3c5x9B half-duplex mode"); - net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */ + case 12: + /* Force full-duplex mode if 3c5x9b. */ + if (sw_info & 0x000f) { + pr_cont("Forcing 3c5x9b full-duplex mode"); + break; + } + fallthrough; + case 8: + /* Set full-duplex mode based on eeprom config + * setting. + */ + if ((sw_info & 0x000f) && (sw_info & 0x8000)) { + pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)"); + break; + } + fallthrough; + default: + /* xcvr = (0 || 4) OR user has an old 3c5x9 non "B" + * model. + */ + pr_cont("Setting 3c5x9/3c5x9B half-duplex mode"); + /* Disable full duplex. */ + net_diag = (net_diag & ~FD_ENABLE); } outw(net_diag, ioaddr + WN4_NETDIAG); - pr_cont(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info); + pr_cont(" if_port: %d, sw_info: %4.4x\n", + dev->if_port, sw_info); if (el3_debug > 3) - pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag); + pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", + dev->name, net_diag); /* Enable link beat and jabber check. */ outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA); } /* Switch to the stats window, and clear all stats by reading. */ - outw(StatsDisable, ioaddr + EL3_CMD); + outw(STATS_DISABLE, ioaddr + EL3_CMD); EL3WINDOW(6); for (i = 0; i < 9; i++) inb(ioaddr + i); @@ -1294,18 +1386,22 @@ el3_up(struct net_device *dev) EL3WINDOW(1); /* Accept b-case and phys addr only. */ - outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD); - outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */ - - outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */ - outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */ + outw(SET_RX_FILTER | RX_STATION | RX_BROADCAST, ioaddr + EL3_CMD); + /* Turn on statistics. */ + outw(STATS_ENABLE, ioaddr + EL3_CMD); + + /* Enable the receiver. */ + outw(RX_ENABLE, ioaddr + EL3_CMD); + /* Enable transmitter. */ + outw(TX_ENABLE, ioaddr + EL3_CMD); /* Allow status bits to be seen. */ - outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD); + outw(SET_STATUS_ENB | 0xff, ioaddr + EL3_CMD); /* Ack all pending events, and set active indicator mask. */ - outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq, - ioaddr + EL3_CMD); - outw(SetIntrEnb | IntLatch|TxAvailable|TxComplete|RxComplete|StatsFull, - ioaddr + EL3_CMD); + outw(ACK_INTR | INT_LATCH | TX_AVAILABLE | RX_EARLY | INT_REQ, + ioaddr + EL3_CMD); + outw((SET_INTR_ENB | INT_LATCH | TX_AVAILABLE | TX_COMPLETE | + RX_COMPLETE | STATS_FULL), + ioaddr + EL3_CMD); netif_start_queue(dev); } @@ -1313,12 +1409,11 @@ el3_up(struct net_device *dev) /* Power Management support functions */ #ifdef CONFIG_PM -static int -el3_suspend(struct device *pdev, pm_message_t state) +static int el3_suspend(struct device *pdev, pm_message_t state) { - unsigned long flags; struct net_device *dev; struct el3_private *lp; + unsigned long flags; int ioaddr; dev = dev_get_drvdata(pdev); @@ -1331,18 +1426,17 @@ el3_suspend(struct device *pdev, pm_message_t state) netif_device_detach(dev); el3_down(dev); - outw(PowerDown, ioaddr + EL3_CMD); + outw(POWER_DOWN, ioaddr + EL3_CMD); spin_unlock_irqrestore(&lp->lock, flags); return 0; } -static int -el3_resume(struct device *pdev) +static int el3_resume(struct device *pdev) { - unsigned long flags; struct net_device *dev; struct el3_private *lp; + unsigned long flags; int ioaddr; dev = dev_get_drvdata(pdev); @@ -1351,7 +1445,7 @@ el3_resume(struct device *pdev) spin_lock_irqsave(&lp->lock, flags); - outw(PowerUp, ioaddr + EL3_CMD); + outw(POWER_UP, ioaddr + EL3_CMD); EL3WINDOW(0); el3_up(dev); @@ -1364,7 +1458,7 @@ el3_resume(struct device *pdev) #endif /* CONFIG_PM */ -module_param(debug,int, 0); +module_param(debug, int, 0); module_param_hw_array(irq, int, irq, NULL, 0); module_param(max_interrupt_work, int, 0); MODULE_PARM_DESC(debug, "debug level (0-6)"); @@ -1393,15 +1487,14 @@ static int __init el3_init_module(void) #endif /* Select an open I/O location at 0x1*0 to do ISA contention select. */ /* Start with 0x110 to avoid some sound cards.*/ - for (id_port = 0x110 ; id_port < 0x200; id_port += 0x10) { + for (id_port = 0x110; id_port < 0x200; id_port += 0x10) { if (!request_region(id_port, 1, "3c509-control")) continue; outb(0x00, id_port); outb(0xff, id_port); if (inb(id_port) & 0x01) break; - else - release_region(id_port, 1); + release_region(id_port, 1); } if (id_port >= 0x200) { id_port = 0; @@ -1446,5 +1539,5 @@ static void __exit el3_cleanup_module(void) #endif } -module_init (el3_init_module); -module_exit (el3_cleanup_module); +module_init(el3_init_module); +module_exit(el3_cleanup_module); -- cgit v1.2.3 From 8f0f5c4fb9df0e19a341e0c6ed8dc4fda9124f03 Mon Sep 17 00:00:00 2001 From: "Masami Hiramatsu (Google)" Date: Thu, 21 May 2026 13:49:14 +0900 Subject: tracing: Do not call map->ops->elt_free() if elt_alloc() fails In paths where tracing_map_elt_alloc() failed to allocate objects, the map->ops->elt_alloc() call was never successful. In this case, map->ops->elt_free() should not be called. Link: https://sashiko.dev/#/patchset/20260520223101.34710-1-rosenp%40gmail.com Cc: stable@vger.kernel.org Cc: Tom Zanussi Cc: Mathieu Desnoyers Cc: Rosen Penev Reported-by: Sashiko Fixes: 2734b629525a ("tracing: Add per-element variable support to tracing_map") Link: https://patch.msgid.link/177933895460.108746.5396070821443932634.stgit@devnote2 Signed-off-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt --- kernel/trace/tracing_map.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/kernel/trace/tracing_map.c b/kernel/trace/tracing_map.c index bf1a507695b6..0dd7927df22a 100644 --- a/kernel/trace/tracing_map.c +++ b/kernel/trace/tracing_map.c @@ -386,13 +386,11 @@ static void tracing_map_elt_init_fields(struct tracing_map_elt *elt) } } -static void tracing_map_elt_free(struct tracing_map_elt *elt) +static void __tracing_map_elt_free(struct tracing_map_elt *elt) { if (!elt) return; - if (elt->map->ops && elt->map->ops->elt_free) - elt->map->ops->elt_free(elt); kfree(elt->fields); kfree(elt->vars); kfree(elt->var_set); @@ -400,6 +398,17 @@ static void tracing_map_elt_free(struct tracing_map_elt *elt) kfree(elt); } +static void tracing_map_elt_free(struct tracing_map_elt *elt) +{ + if (!elt) + return; + + /* Only objects initialized with alloc_elt() should be passed to free_elt().*/ + if (elt->map->ops && elt->map->ops->elt_free) + elt->map->ops->elt_free(elt); + __tracing_map_elt_free(elt); +} + static struct tracing_map_elt *tracing_map_elt_alloc(struct tracing_map *map) { struct tracing_map_elt *elt; @@ -444,7 +453,7 @@ static struct tracing_map_elt *tracing_map_elt_alloc(struct tracing_map *map) } return elt; free: - tracing_map_elt_free(elt); + __tracing_map_elt_free(elt); return ERR_PTR(err); } -- cgit v1.2.3 From 9a1730245e416d11ad5c0f2c100061d61cc43f60 Mon Sep 17 00:00:00 2001 From: Nicolai Buchwitz Date: Wed, 20 May 2026 20:43:20 +0200 Subject: net: bcmgenet: keep RBUF EEE/PM disabled Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX path on GENET hardware once MAC EEE becomes active. RX traffic stops flowing while the link stays up and the usual descriptor/RX error counters remain quiet. In that state the MAC still accepts frames (rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to DMA, so rx_packets is no longer incremented at the netdev level. On some boards the corruption ends up as a paging fault in skb_release_data via bcmgenet_rx_poll on an LPI exit. Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian Fainelli on an internal Broadcom 4908-family board with the same crash signature. RBUF_PM_EN is not publicly documented. This shows up more often now that phy_support_eee() enables EEE by default, but it also affects older kernels as soon as TX LPI is turned on via ethtool, so it is not specific to recent changes. Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so the bits stay off across resets. UMAC and TBUF setup is left alone so TX-side EEE keeps working. Link: https://github.com/raspberrypi/linux/issues/7304 Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Cc: stable@vger.kernel.org Signed-off-by: Nicolai Buchwitz Reviewed-by: Florian Fainelli Link: https://patch.msgid.link/20260520184320.652053-1-nb@tipi-net.de Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 54f71b1e85fc..7c11cf916762 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -1368,13 +1368,12 @@ void bcmgenet_eee_enable_set(struct net_device *dev, bool enable) reg &= ~(TBUF_EEE_EN | TBUF_PM_EN); bcmgenet_writel(reg, priv->base + off); - /* Do the same for thing for RBUF */ + /* RBUF EEE/PM can break the RX path on GENET. Keep it disabled. */ reg = bcmgenet_rbuf_readl(priv, RBUF_ENERGY_CTRL); - if (enable) - reg |= RBUF_EEE_EN | RBUF_PM_EN; - else + if (reg & (RBUF_EEE_EN | RBUF_PM_EN)) { reg &= ~(RBUF_EEE_EN | RBUF_PM_EN); - bcmgenet_rbuf_writel(priv, reg, RBUF_ENERGY_CTRL); + bcmgenet_rbuf_writel(priv, reg, RBUF_ENERGY_CTRL); + } if (!enable && priv->clk_eee_enabled) { clk_disable_unprepare(priv->clk_eee); -- cgit v1.2.3 From 979c017803c40829b03acd9e5236e354b7622360 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Mon, 18 May 2026 14:34:47 -0400 Subject: l2tp: use list_del_rcu in l2tp_session_unhash An unprivileged local user can pin a host CPU indefinitely in l2tp_session_get_by_ifname() by issuing L2TP_CMD_SESSION_GET on L2TP_ATTR_IFNAME concurrently with L2TP_CMD_SESSION_CREATE and L2TP_CMD_SESSION_DELETE on the same tunnel. All three commands take GENL_UNS_ADMIN_PERM, so CAP_NET_ADMIN in the netns user namespace suffices; on any host that has l2tp_core loaded the trigger is reachable from a standard `unshare -Urn` sandbox. l2tp_session_unhash() removes a session from tunnel->session_list with list_del_init(), but that list is walked by l2tp_session_get_by_ifname() with list_for_each_entry_rcu() under rcu_read_lock_bh(). list_del_init() leaves the deleted entry's next/prev self-pointing; a reader that has loaded the entry and then advances pos->list.next reads &session->list, container_of()s back to the same session, and list_for_each_entry_rcu() never reaches the list head. The CPU stays in strcmp() inside the walker, with BH and preemption disabled, so RCU grace periods on the host stall behind it and the wedged thread cannot be killed (SIGKILL is delivered on syscall return). Use list_del_rcu() to match the existing list_add_rcu() in l2tp_session_register(); the deleted session remains visible to in-flight walkers with consistent next/prev pointers until kfree_rcu() in l2tp_session_free() releases it. tunnel->session_list has exactly one list_del_init() call site; the list_del_init (&session->clist) at l2tp_core.c:533 operates on the per-collision list, which is not walked under RCU. list_empty(&session->list) is not used anywhere in net/l2tp/ after the unhash point, so dropping the post-delete self-init is safe; the fix has no userspace-visible behavior change. Fixes: 89b768ec2dfef ("l2tp: use rcu list add/del when updating lists") Cc: stable@vger.kernel.org # 6.11+ Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260518183447.64078-1-michael.bommarito@gmail.com Signed-off-by: Jakub Kicinski --- net/l2tp/l2tp_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index 157fc23ce4e1..1455f67e01dd 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1360,7 +1360,7 @@ static void l2tp_session_unhash(struct l2tp_session *session) spin_lock_bh(&pn->l2tp_session_idr_lock); /* Remove from the per-tunnel list */ - list_del_init(&session->list); + list_del_rcu(&session->list); /* Remove from per-net IDR */ if (tunnel->version == L2TP_HDR_VER_3) { -- cgit v1.2.3 From bdd39576bf50a50bdafe3da968fd271bc674a48f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 20 May 2026 11:42:07 +0000 Subject: net: bridge: prevent too big nested attributes in br_fill_linkxstats() After commit ff205bf8c554 ("netlink: add one debug check in nla_nest_end()") syzbot found that br_fill_linkxstats() can send corrupted netlink packets. Make sure the nested attribute size is bounded. Fixes: a60c090361ea ("bridge: netlink: export per-vlan stats") Reported-by: syzbot+a35f9259d08f907c06e6@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6a0b0da3.050a0220.175f0c.0000.GAE@google.com/ Signed-off-by: Eric Dumazet Reviewed-by: Ido Schimmel Acked-by: Nikolay Aleksandrov Link: https://patch.msgid.link/20260520114207.1394241-1-edumazet@google.com Signed-off-by: Jakub Kicinski --- net/bridge/br_netlink.c | 10 ++++++++++ net/core/rtnetlink.c | 5 +++-- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c index 6fd5386a1d64..c04a4d0889ae 100644 --- a/net/bridge/br_netlink.c +++ b/net/bridge/br_netlink.c @@ -1824,6 +1824,7 @@ static int br_fill_linkxstats(struct sk_buff *skb, const struct net_device *dev, int *prividx, int attr) { + unsigned int limit = U16_MAX - nla_total_size(0); struct nlattr *nla __maybe_unused; struct net_bridge_port *p = NULL; struct net_bridge_vlan_group *vg; @@ -1841,6 +1842,7 @@ static int br_fill_linkxstats(struct sk_buff *skb, p = br_port_get_rtnl(dev); if (!p) return 0; + limit -= nla_total_size_64bit(sizeof(p->stp_xstats)); br = p->br; vg = nbp_vlan_group(p); break; @@ -1855,6 +1857,9 @@ static int br_fill_linkxstats(struct sk_buff *skb, if (vg) { u16 pvid; +#ifdef CONFIG_BRIDGE_IGMP_SNOOPING + limit -= nla_total_size_64bit(sizeof(struct br_mcast_stats)); +#endif pvid = br_get_pvid(vg); list_for_each_entry(v, &vg->vlan_list, vlist) { struct bridge_vlan_xstats vxi; @@ -1862,6 +1867,11 @@ static int br_fill_linkxstats(struct sk_buff *skb, if (++vl_idx < *prividx) continue; + + if (skb_tail_pointer(skb) - (unsigned char *)nest + + nla_total_size(sizeof(vxi)) >= limit) + goto nla_put_failure; + memset(&vxi, 0, sizeof(vxi)); vxi.vid = v->vid; vxi.flags = v->flags; diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index df042da422ef..511c25bf6f2a 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -6328,8 +6328,9 @@ static int rtnl_stats_get(struct sk_buff *skb, struct nlmsghdr *nlh, NETLINK_CB(skb).portid, nlh->nlmsg_seq, 0, 0, &filters, &idxattr, &prividx, extack); if (err < 0) { - /* -EMSGSIZE implies BUG in if_nlmsg_stats_size */ - WARN_ON(err == -EMSGSIZE); + /* -EMSGSIZE implies BUG in if_nlmsg_stats_size + * or a too big nested attribute. + */ kfree_skb(nskb); } else { err = rtnl_unicast(nskb, net, NETLINK_CB(skb).portid); -- cgit v1.2.3 From 8c84c5ec4aaff6ad7aac49935e050fed6b360a28 Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 20 May 2026 14:44:13 +0800 Subject: net: enetc: fix incorrect mailbox message status returned to VFs There are two cases where VFs receive an incorrect success status from the PF mailbox message handler, misleading them into believing their requests have been fulfilled: In enetc_msg_handle_rxmsg(), *status is pre-initialized to ENETC_MSG_CMD_STATUS_OK. When an unsupported command type is received, the default case only logs an error without updating *status, so it remains as ENETC_MSG_CMD_STATUS_OK. In enetc_msg_pf_set_vf_primary_mac_addr(), when the PF has already assigned a MAC address for the VF (ENETC_VF_FLAG_PF_SET_MAC is set), the function rejects the request but returns ENETC_MSG_CMD_STATUS_OK instead of ENETC_MSG_CMD_STATUS_FAIL. Therefore, correct the status value for the two cases mentioned above. Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support") Signed-off-by: Wei Fang Reviewed-by: Harshitha Ramamurthy Link: https://patch.msgid.link/20260520064421.91569-2-wei.fang@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index a12fd54a475f..27d4bb65e017 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -493,11 +493,13 @@ static u16 enetc_msg_pf_set_vf_primary_mac_addr(struct enetc_pf *pf, return ENETC_MSG_CMD_STATUS_FAIL; addr = cmd->mac.sa_data; - if (vf_state->flags & ENETC_VF_FLAG_PF_SET_MAC) + if (vf_state->flags & ENETC_VF_FLAG_PF_SET_MAC) { dev_warn(dev, "Attempt to override PF set mac addr for VF%d\n", vf_id); - else - enetc_pf_set_primary_mac_addr(&pf->si->hw, vf_id + 1, addr); + return ENETC_MSG_CMD_STATUS_FAIL; + } + + enetc_pf_set_primary_mac_addr(&pf->si->hw, vf_id + 1, addr); return ENETC_MSG_CMD_STATUS_OK; } @@ -509,7 +511,6 @@ void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int vf_id, u16 *status) struct enetc_msg_cmd_header *cmd_hdr; u16 cmd_type; - *status = ENETC_MSG_CMD_STATUS_OK; cmd_hdr = (struct enetc_msg_cmd_header *)msg->vaddr; cmd_type = cmd_hdr->type; @@ -518,6 +519,7 @@ void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int vf_id, u16 *status) *status = enetc_msg_pf_set_vf_primary_mac_addr(pf, vf_id); break; default: + *status = ENETC_MSG_CMD_STATUS_FAIL; dev_err(dev, "command not supported (cmd_type: 0x%x)\n", cmd_type); } -- cgit v1.2.3 From 5027266dea471e140f93dd534845c9c4f43219a3 Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 20 May 2026 14:44:14 +0800 Subject: net: enetc: fix missing error code when pf->vf_state allocation fails In enetc_pf_probe(), when the memory allocation for pf->vf_state fails, the code jumps to the error handling label but the variable 'err' is not assigned an appropriate error code beforehand. This causes the function to return 0 (success) on an allocation failure path, misleading the caller into thinking the probe succeeded. So set err to -ENOMEM before jumping to the error handling label when the allocation for pf->vf_state returns NULL. Fixes: e15c5506dd39 ("net: enetc: allocate vf_state during PF probes") Signed-off-by: Wei Fang Reviewed-by: Harshitha Ramamurthy Link: https://patch.msgid.link/20260520064421.91569-3-wei.fang@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 27d4bb65e017..b743b6d33ccc 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -962,8 +962,10 @@ static int enetc_pf_probe(struct pci_dev *pdev, if (pf->total_vfs) { pf->vf_state = kzalloc_objs(struct enetc_vf_state, pf->total_vfs); - if (!pf->vf_state) + if (!pf->vf_state) { + err = -ENOMEM; goto err_alloc_vf_state; + } } err = enetc_setup_mac_addresses(node, pf); -- cgit v1.2.3 From 4a995d37b537f437daa01752d39cf44c6ba9ee2c Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 20 May 2026 14:44:15 +0800 Subject: net: enetc: add ratelimiting to VF mailbox error messages Sashiko reported that a buggy or malicious guest VM can flood the host kernel log by repeatedly sending VF-to-PF messages at a high rate, degrading host performance and hiding important system logs [1]. Fix by replacing dev_err()/dev_warn() with dev_err_ratelimited(), limiting output to the default kernel ratelimit. This ensures errors are still logged for debugging while preventing log flooding attacks. Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com #1 Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support") Signed-off-by: Wei Fang Reviewed-by: Harshitha Ramamurthy Link: https://patch.msgid.link/20260520064421.91569-4-wei.fang@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index b743b6d33ccc..dea3a92c4722 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -494,8 +494,9 @@ static u16 enetc_msg_pf_set_vf_primary_mac_addr(struct enetc_pf *pf, addr = cmd->mac.sa_data; if (vf_state->flags & ENETC_VF_FLAG_PF_SET_MAC) { - dev_warn(dev, "Attempt to override PF set mac addr for VF%d\n", - vf_id); + dev_err_ratelimited(dev, + "VF%d attempted to override PF set MAC\n", + vf_id); return ENETC_MSG_CMD_STATUS_FAIL; } @@ -520,8 +521,9 @@ void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int vf_id, u16 *status) break; default: *status = ENETC_MSG_CMD_STATUS_FAIL; - dev_err(dev, "command not supported (cmd_type: 0x%x)\n", - cmd_type); + dev_err_ratelimited(dev, + "command not supported (cmd_type: 0x%x)\n", + cmd_type); } } -- cgit v1.2.3 From c666fa632fe628c34904bcd59aeb96bf08e40d31 Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 20 May 2026 14:44:16 +0800 Subject: net: enetc: fix TOCTOU race and validate VF MAC address Sashiko reported that the PF driver accepts arbitrary MAC address from from VF mailbox messages without proper validation, creating a security vulnerability [1]. In enetc_msg_pf_set_vf_primary_mac_addr(), the MAC address is extracted directly from the message buffer (cmd->mac.sa_data) and programmed into hardware via pf->ops->set_si_primary_mac() without any validity checks. A malicious VF can configure a multicast, broadcast, or all-zero MAC address. Therefore, a validation to check the MAC address provided by VF is required. However, simply checking the MAC address is not enough, because it also has the potential TOCTOU race [2]: The code reads the MAC address from the DMA buffer to validate it via is_valid_ether_addr(), if validation passes, reads the same DMA buffer a second time when calling enetc_pf_set_primary_mac_addr() to program the hardware. A malicious VF can exploit this window by overwriting the MAC address in the DMA buffer between the validation check and the hardware programming, bypassing the validation entirely. Therefore, allocate a local buffer in enetc_msg_handle_rxmsg() and copy the message content from the DMA buffer via memcpy() before processing. This ensures the PF operates on a stable snapshot that the VF cannot modify. Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com #1 Link: https://sashiko.dev/#/patchset/20260513103021.2190593-1-wei.fang%40nxp.com #2 Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support") Signed-off-by: Wei Fang Reviewed-by: Harshitha Ramamurthy Link: https://patch.msgid.link/20260520064421.91569-5-wei.fang@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 39 +++++++++++++++++++------ 1 file changed, 30 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index dea3a92c4722..09c642040892 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -478,21 +478,24 @@ static void enetc_configure_port(struct enetc_pf *pf) /* Messaging */ static u16 enetc_msg_pf_set_vf_primary_mac_addr(struct enetc_pf *pf, - int vf_id) + int vf_id, void *msg) { struct enetc_vf_state *vf_state = &pf->vf_state[vf_id]; - struct enetc_msg_swbd *msg = &pf->rxmsg[vf_id]; - struct enetc_msg_cmd_set_primary_mac *cmd; + struct enetc_msg_cmd_set_primary_mac *cmd = msg; struct device *dev = &pf->si->pdev->dev; - u16 cmd_id; + u16 cmd_id = cmd->header.id; char *addr; - cmd = (struct enetc_msg_cmd_set_primary_mac *)msg->vaddr; - cmd_id = cmd->header.id; if (cmd_id != ENETC_MSG_CMD_MNG_ADD) return ENETC_MSG_CMD_STATUS_FAIL; addr = cmd->mac.sa_data; + if (!is_valid_ether_addr(addr)) { + dev_err_ratelimited(dev, "VF%d attempted to set invalid MAC\n", + vf_id); + return ENETC_MSG_CMD_STATUS_FAIL; + } + if (vf_state->flags & ENETC_VF_FLAG_PF_SET_MAC) { dev_err_ratelimited(dev, "VF%d attempted to override PF set MAC\n", @@ -507,17 +510,33 @@ static u16 enetc_msg_pf_set_vf_primary_mac_addr(struct enetc_pf *pf, void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int vf_id, u16 *status) { - struct enetc_msg_swbd *msg = &pf->rxmsg[vf_id]; + struct enetc_msg_swbd *msg_swbd = &pf->rxmsg[vf_id]; struct device *dev = &pf->si->pdev->dev; struct enetc_msg_cmd_header *cmd_hdr; u16 cmd_type; + u8 *msg; - cmd_hdr = (struct enetc_msg_cmd_header *)msg->vaddr; + msg = kzalloc_objs(*msg, msg_swbd->size); + if (!msg) { + dev_err_ratelimited(dev, + "Failed to allocate message buffer\n"); + *status = ENETC_MSG_CMD_STATUS_FAIL; + return; + } + + /* Currently, only ENETC_MSG_CMD_MNG_MAC command is supported, so + * only sizeof(struct enetc_msg_cmd_set_primary_mac) bytes need to + * be copied. This data already includes the cmd_type field, so it + * can correctly return an error code. + */ + memcpy(msg, msg_swbd->vaddr, + sizeof(struct enetc_msg_cmd_set_primary_mac)); + cmd_hdr = (struct enetc_msg_cmd_header *)msg; cmd_type = cmd_hdr->type; switch (cmd_type) { case ENETC_MSG_CMD_MNG_MAC: - *status = enetc_msg_pf_set_vf_primary_mac_addr(pf, vf_id); + *status = enetc_msg_pf_set_vf_primary_mac_addr(pf, vf_id, msg); break; default: *status = ENETC_MSG_CMD_STATUS_FAIL; @@ -525,6 +544,8 @@ void enetc_msg_handle_rxmsg(struct enetc_pf *pf, int vf_id, u16 *status) "command not supported (cmd_type: 0x%x)\n", cmd_type); } + + kfree(msg); } #ifdef CONFIG_PCI_IOV -- cgit v1.2.3 From f262f5d893327a7131ed25ac8dd01ed7024bcc18 Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 20 May 2026 14:44:17 +0800 Subject: net: enetc: fix race condition in VF MAC address configuration Sashiko reported a potential race condition between the VF message handler and administrative VF MAC configuration from the host [1]. The VF message handler (enetc_msg_pf_set_vf_primary_mac_addr) runs asynchronously in a workqueue context and accesses vf_state->flags without any locking. Concurrently, the host can administratively change the VF MAC address via enetc_pf_set_vf_mac(), which executes under RTNL lock and modifies both vf_state->flags and hardware registers. This creates two race windows: 1) TOCTOU race on vf_state->flags: The check of ENETC_VF_FLAG_PF_SET_MAC and subsequent MAC programming are not atomic, allowing the flag state to change between check and use. 2) Torn MAC address writes: Hardware MAC programming requires multiple non-atomic register writes (__raw_writel for lower 32 bits and __raw_writew for upper 16 bits). Concurrent updates from VF mailbox and PF admin paths can interleave these operations, resulting in a corrupted MAC address being programmed into the hardware. Fix by introducing a per-VF mutex to serialize access to vf_state and hardware MAC register updates. Both enetc_pf_set_vf_mac() and enetc_msg_pf_set_vf_primary_mac_addr() now acquire this lock before accessing vf_state->flags or programming the MAC address, ensuring atomic read-modify-write sequences and preventing register write interleaving. Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com #1 Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support") Signed-off-by: Wei Fang Reviewed-by: Harshitha Ramamurthy Link: https://patch.msgid.link/20260520064421.91569-6-wei.fang@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 10 ++++++++++ drivers/net/ethernet/freescale/enetc/enetc_pf.h | 1 + 2 files changed, 11 insertions(+) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 09c642040892..8e11a023d516 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -252,8 +252,12 @@ static int enetc_pf_set_vf_mac(struct net_device *ndev, int vf, u8 *mac) return -EADDRNOTAVAIL; vf_state = &pf->vf_state[vf]; + + mutex_lock(&vf_state->lock); vf_state->flags |= ENETC_VF_FLAG_PF_SET_MAC; enetc_pf_set_primary_mac_addr(&priv->si->hw, vf + 1, mac); + mutex_unlock(&vf_state->lock); + return 0; } @@ -496,7 +500,9 @@ static u16 enetc_msg_pf_set_vf_primary_mac_addr(struct enetc_pf *pf, return ENETC_MSG_CMD_STATUS_FAIL; } + mutex_lock(&vf_state->lock); if (vf_state->flags & ENETC_VF_FLAG_PF_SET_MAC) { + mutex_unlock(&vf_state->lock); dev_err_ratelimited(dev, "VF%d attempted to override PF set MAC\n", vf_id); @@ -504,6 +510,7 @@ static u16 enetc_msg_pf_set_vf_primary_mac_addr(struct enetc_pf *pf, } enetc_pf_set_primary_mac_addr(&pf->si->hw, vf_id + 1, addr); + mutex_unlock(&vf_state->lock); return ENETC_MSG_CMD_STATUS_OK; } @@ -989,6 +996,9 @@ static int enetc_pf_probe(struct pci_dev *pdev, err = -ENOMEM; goto err_alloc_vf_state; } + + for (int i = 0; i < pf->total_vfs; i++) + mutex_init(&pf->vf_state[i].lock); } err = enetc_setup_mac_addresses(node, pf); diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h index ae407e9e9ee7..35d484858c7b 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h @@ -14,6 +14,7 @@ enum enetc_vf_flags { }; struct enetc_vf_state { + struct mutex lock; /* Prevent concurrent access */ enum enetc_vf_flags flags; }; -- cgit v1.2.3 From adb4599979cd00d5d426f26cf78b65264217e35b Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 20 May 2026 14:44:18 +0800 Subject: net: enetc: fix DMA write to freed memory in enetc_msg_free_mbx() The teardown sequence in enetc_msg_psi_free() frees the DMA buffer before clearing the device's DMA address registers. If a VF sends a message or a pending DMA transfer completes within this window, the hardware will perform a DMA write into the kernel memory that has already been returned to the allocator. The result is silent memory corruption that can affect arbitrary kernel data structures. Therefore, clear the DMA address registers before the DMA buffer is freed. Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support") Signed-off-by: Wei Fang Reviewed-by: Harshitha Ramamurthy Link: https://patch.msgid.link/20260520064421.91569-7-wei.fang@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_msg.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_msg.c b/drivers/net/ethernet/freescale/enetc/enetc_msg.c index 40d22ebe9224..b4d7457097e6 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_msg.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_msg.c @@ -96,12 +96,12 @@ static void enetc_msg_free_mbx(struct enetc_si *si, int idx) struct enetc_hw *hw = &si->hw; struct enetc_msg_swbd *msg; + enetc_wr(hw, ENETC_PSIVMSGRCVAR0(idx), 0); + enetc_wr(hw, ENETC_PSIVMSGRCVAR1(idx), 0); + msg = &pf->rxmsg[idx]; dma_free_coherent(&si->pdev->dev, msg->size, msg->vaddr, msg->dma); memset(msg, 0, sizeof(*msg)); - - enetc_wr(hw, ENETC_PSIVMSGRCVAR0(idx), 0); - enetc_wr(hw, ENETC_PSIVMSGRCVAR1(idx), 0); } int enetc_msg_psi_init(struct enetc_pf *pf) -- cgit v1.2.3 From f8ae63de2a872fa3b68c287c35379f6d73d38a5d Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 20 May 2026 14:44:19 +0800 Subject: net: enetc: fix unbounded loop and interrupt handling in VF-to-PF messaging The enetc_msg_task() function has several issues that need to be addressed: 1. Unbounded loop causing potential DoS: enetc_msg_task() processes VF-to-PF mailbox messages in an unbounded for(;;) loop that keeps polling ENETC_PSIMSGRR until no MR bits are set. A malicious guest VM can exploit this by continuously sending messages at a high rate - immediately sending a new message as soon as the PF acknowledges the previous one. Since the worker thread never yields or enforces a processing budget, the mr_mask check frequently evaluates to non-zero, causing the PF to spin indefinitely and starving other tasks. Fix this by replacing the unbounded loop with a single snapshot read at task entry. The task processes only the VFs whose MR bits were set at that point, then re-enables message interrupts before returning. This bounds work per invocation to at most num_vfs iterations. No messages are lost because the message interrupt is disabled in enetc_msg_psi_msix() before scheduling enetc_msg_task(), so any new messages arriving during processing will trigger a fresh interrupt once re-enabled, scheduling another task invocation. 2. Write order of ENETC_PSIIDR and ENETC_PSIMSGRR: Both ENETC_PSIIDR and ENETC_PSIMSGRR contain MR bits indicating messages have been received from VSIs, but only ENETC_PSIIDR trigger the CPU interrupt. Previously, ENETC_PSIMSGRR was written before ENETC_PSIIDR. Writing ENETC_PSIMSGRR returns the message code to the VSI in its upper 16 bits, signaling to the VF that message processing is complete and it may send the next message. If the VF sends a new message before ENETC_PSIIDR is written, the subsequent w1c write to ENETC_PSIIDR would inadvertently clear the MR bit set by the new message, causing the interrupt to be lost and the new message to go unprocessed. Therefore, write ENETC_PSIIDR first to clear the interrupt source, then write ENETC_PSIMSGRR to acknowledge the message to the VSI. 3. Check both ENETC_PSIMSGRR and ENETC_PSIIDR for mr_status: The write order change above introduces a potential race: if a VF sends a new message in the window between the ENETC_PSIIDR w1c and the ENETC_PSIMSGRR w1c, the ENETC_PSIMSGRR MR bit for the new message may not be set. If mr_status was derived solely from ENETC_PSIMSGRR, this message would never be detected despite ENETC_PSIIDR retaining its MR bit, leading to an unacknowledged interrupt storm. Fix this by computing mr_status as the union of both ENETC_PSIMSGRR and ENETC_PSIIDR MR bits, ensuring all pending messages are detected regardless of which register reflects the new message state. Additionally, rename the per-register MR macros (ENETC_PSI*_MR_MASK, ENETC_PSI*_MR) to register-agnostic names (ENETC_PSIMR_MASK, ENETC_PSIMR_BIT) since the MR bit layout is shared across ENETC_PSIMSGRR, ENETC_PSIIER, and ENETC_PSIIDR. Make the mask macro dynamic based on the actual number of active VFs rather than hardcoded. Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support") Signed-off-by: Wei Fang Link: https://patch.msgid.link/20260520064421.91569-8-wei.fang@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_hw.h | 15 ++++-- drivers/net/ethernet/freescale/enetc/enetc_msg.c | 65 ++++++++++++++---------- 2 files changed, 49 insertions(+), 31 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h index 662e4fbafb74..e58cc81d199d 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h +++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h @@ -56,11 +56,21 @@ static inline u32 enetc_vsi_set_msize(u32 size) } #define ENETC_PSIMSGRR 0x204 -#define ENETC_PSIMSGRR_MR_MASK GENMASK(2, 1) -#define ENETC_PSIMSGRR_MR(n) BIT((n) + 1) /* n = VSI index */ #define ENETC_PSIVMSGRCVAR0(n) (0x210 + (n) * 0x8) /* n = VSI index */ #define ENETC_PSIVMSGRCVAR1(n) (0x214 + (n) * 0x8) +/* Message received mask, n is the active number of VSIs. + * It is available for ENETC_PSIMSGRR, ENETC_PSIIER, and + * ENETC_PSIIDR registers. + */ +#define ENETC_PSIMR_MASK(n) \ + ({ typeof(n) _n = (n); (_n) ? GENMASK((_n), 1) : 0; }) + +/* Message received bit, n is VSI index. It is available for + * ENETC_PSIMSGRR, ENETC_PSIIER, and ENETC_PSIIDR registers. + */ +#define ENETC_PSIMR_BIT(n) BIT((n) + 1) + #define ENETC_VSIMSGSR 0x204 /* RO */ #define ENETC_VSIMSGSR_MB BIT(0) #define ENETC_VSIMSGSR_MS BIT(1) @@ -94,7 +104,6 @@ static inline u32 enetc_vsi_set_msize(u32 size) #define ENETC_SICAPR1 0x904 #define ENETC_PSIIER 0xa00 -#define ENETC_PSIIER_MR_MASK GENMASK(2, 1) #define ENETC_PSIIDR 0xa08 #define ENETC_SITXIDR 0xa18 #define ENETC_SIRXIDR 0xa28 diff --git a/drivers/net/ethernet/freescale/enetc/enetc_msg.c b/drivers/net/ethernet/freescale/enetc/enetc_msg.c index b4d7457097e6..3136e8321e4d 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_msg.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_msg.c @@ -3,18 +3,25 @@ #include "enetc_pf.h" -static void enetc_msg_disable_mr_int(struct enetc_hw *hw) +static void enetc_msg_disable_mr_int(struct enetc_pf *pf) { - u32 psiier = enetc_rd(hw, ENETC_PSIIER); + struct enetc_hw *hw = &pf->si->hw; + u32 psiier; + + psiier = enetc_rd(hw, ENETC_PSIIER) & ~ENETC_PSIMR_MASK(pf->num_vfs); + /* disable MR int source(s) */ - enetc_wr(hw, ENETC_PSIIER, psiier & ~ENETC_PSIIER_MR_MASK); + enetc_wr(hw, ENETC_PSIIER, psiier); } -static void enetc_msg_enable_mr_int(struct enetc_hw *hw) +static void enetc_msg_enable_mr_int(struct enetc_pf *pf) { - u32 psiier = enetc_rd(hw, ENETC_PSIIER); + struct enetc_hw *hw = &pf->si->hw; + u32 psiier; - enetc_wr(hw, ENETC_PSIIER, psiier | ENETC_PSIIER_MR_MASK); + psiier = enetc_rd(hw, ENETC_PSIIER) | ENETC_PSIMR_MASK(pf->num_vfs); + + enetc_wr(hw, ENETC_PSIIER, psiier); } static irqreturn_t enetc_msg_psi_msix(int irq, void *data) @@ -22,7 +29,7 @@ static irqreturn_t enetc_msg_psi_msix(int irq, void *data) struct enetc_si *si = (struct enetc_si *)data; struct enetc_pf *pf = enetc_si_priv(si); - enetc_msg_disable_mr_int(&si->hw); + enetc_msg_disable_mr_int(pf); schedule_work(&pf->msg_task); return IRQ_HANDLED; @@ -31,33 +38,35 @@ static irqreturn_t enetc_msg_psi_msix(int irq, void *data) static void enetc_msg_task(struct work_struct *work) { struct enetc_pf *pf = container_of(work, struct enetc_pf, msg_task); + u32 mr_mask = ENETC_PSIMR_MASK(pf->num_vfs); struct enetc_hw *hw = &pf->si->hw; - unsigned long mr_mask; + u32 mr_status; int i; - for (;;) { - mr_mask = enetc_rd(hw, ENETC_PSIMSGRR) & ENETC_PSIMSGRR_MR_MASK; - if (!mr_mask) { - /* re-arm MR interrupts, w1c the IDR reg */ - enetc_wr(hw, ENETC_PSIIDR, ENETC_PSIIER_MR_MASK); - enetc_msg_enable_mr_int(hw); - return; - } + mr_status = (enetc_rd(hw, ENETC_PSIMSGRR) & mr_mask) | + (enetc_rd(hw, ENETC_PSIIDR) & mr_mask); + if (!mr_status) + goto out; + + for (i = 0; i < pf->num_vfs; i++) { + u32 psimsgrr; + u16 msg_code; - for (i = 0; i < pf->num_vfs; i++) { - u32 psimsgrr; - u16 msg_code; + if (!(ENETC_PSIMR_BIT(i) & mr_status)) + continue; - if (!(ENETC_PSIMSGRR_MR(i) & mr_mask)) - continue; + enetc_msg_handle_rxmsg(pf, i, &msg_code); - enetc_msg_handle_rxmsg(pf, i, &msg_code); + /* w1c to clear the corresponding VF MR bit */ + enetc_wr(hw, ENETC_PSIIDR, ENETC_PSIMR_BIT(i)); - psimsgrr = ENETC_SIMSGSR_SET_MC(msg_code); - psimsgrr |= ENETC_PSIMSGRR_MR(i); /* w1c */ - enetc_wr(hw, ENETC_PSIMSGRR, psimsgrr); - } + psimsgrr = ENETC_SIMSGSR_SET_MC(msg_code); + psimsgrr |= ENETC_PSIMR_BIT(i); /* w1c */ + enetc_wr(hw, ENETC_PSIMSGRR, psimsgrr); } + +out: + enetc_msg_enable_mr_int(pf); } /* Init */ @@ -133,7 +142,7 @@ int enetc_msg_psi_init(struct enetc_pf *pf) } /* enable MR interrupts */ - enetc_msg_enable_mr_int(&si->hw); + enetc_msg_enable_mr_int(pf); return 0; @@ -154,7 +163,7 @@ void enetc_msg_psi_free(struct enetc_pf *pf) cancel_work_sync(&pf->msg_task); /* disable MR interrupts */ - enetc_msg_disable_mr_int(&si->hw); + enetc_msg_disable_mr_int(pf); for (i = 0; i < pf->num_vfs; i++) enetc_msg_free_mbx(si, i); -- cgit v1.2.3 From 54362b0176080b905dbd0651ee3dbb295da41541 Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 20 May 2026 14:44:20 +0800 Subject: net: enetc: fix init and teardown order to prevent use of unsafe resources Sashiko reported a potential issue in enetc_msg_psi_init() where the IRQ handler is registered before DMA resources are fully initialized [1]. The current initialization sequence is: 1. request_irq(enetc_msg_psi_msix) <- IRQ handler registered 2. INIT_WORK(&pf->msg_task, ...) <- work_struct initialized 3. enetc_msg_alloc_mbx() <- mailbox DMA allocated This ordering is unsafe because if a spurious interrupt or pending interrupt from a previous device state fires immediately after request_irq() returns, the registered ISR enetc_msg_psi_msix() will execute and unconditionally call: schedule_work(&pf->msg_task) At this point, pf->msg_task has not been initialized by INIT_WORK(), so the work_struct contains garbage values in its internal linked list pointers (work_struct->entry). Passing an uninitialized work_struct to schedule_work() could corrupt the kernel's workqueue linked lists, potentially leading to: - Kernel panic in __queue_work() - Memory corruption in workqueue data structures - System deadlock or undefined behavior Additionally, even if the work_struct was initialized, the mailbox DMA buffers (pf->rxmsg[]) may not yet be allocated when the work handler enetc_msg_task() runs, resulting in NULL pointer dereference. Fix by reordering the initialization sequence to ensure all resources are properly initialized before the interrupt handler can execute: 1. enetc_msg_alloc_mbx() <- Allocate all mailboxes 2. INIT_WORK(&pf->msg_task, ...) <- Initialize work first 3. request_irq(enetc_msg_psi_msix) <- Register IRQ last 4. Configure hardware & enable MR interrupts This guarantees that when enetc_msg_psi_msix() runs: - pf->msg_task is properly initialized (safe for schedule_work) - pf->rxmsg[] buffers are allocated (safe for work handler access) - Hardware is configured appropriately As the inverse of enetc_msg_psi_init(), enetc_msg_psi_free() also has similar problems. For example, if a pending interrupt fires between enetc_msg_free_mbx() and free_irq(), the ISR enetc_msg_psi_msix() may schedule the work handler again via schedule_work(), which could then access already-freed DMA buffers (pf->rxmsg[]), leading to use-after-free and potential memory corruption. Therefore, the order of enetc_msg_psi_free() is adjusted: 1. enetc_msg_disable_mr_int() <- Stop new interrupts first 2. free_irq() <- Ensure no IRQ handler can run 3. cancel_work_sync() <- Wait for any pending work 4. enetc_msg_disable_mr_int() <- Re-disable in case work re-enabled it 5. enetc_msg_free_mbx() <- Safe to free DMA buffers now Link: https://sashiko.dev/#/patchset/20260511080805.2052495-1-wei.fang%40nxp.com #1 Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support") Signed-off-by: Wei Fang Reviewed-by: Harshitha Ramamurthy Link: https://patch.msgid.link/20260520064421.91569-9-wei.fang@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_msg.c | 35 ++++++++++++------------ 1 file changed, 18 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_msg.c b/drivers/net/ethernet/freescale/enetc/enetc_msg.c index 3136e8321e4d..c09635e7eb3d 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_msg.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_msg.c @@ -118,6 +118,15 @@ int enetc_msg_psi_init(struct enetc_pf *pf) struct enetc_si *si = pf->si; int vector, i, err; + for (i = 0; i < pf->num_vfs; i++) { + err = enetc_msg_alloc_mbx(si, i); + if (err) + goto free_mbx; + } + + /* initialize PSI mailbox */ + INIT_WORK(&pf->msg_task, enetc_msg_task); + /* register message passing interrupt handler */ snprintf(pf->msg_int_name, sizeof(pf->msg_int_name), "%s-vfmsg", si->ndev->name); @@ -126,32 +135,21 @@ int enetc_msg_psi_init(struct enetc_pf *pf) if (err) { dev_err(&si->pdev->dev, "PSI messaging: request_irq() failed!\n"); - return err; + goto free_mbx; } /* set one IRQ entry for PSI message receive notification (SI int) */ enetc_wr(&si->hw, ENETC_SIMSIVR, ENETC_SI_INT_IDX); - /* initialize PSI mailbox */ - INIT_WORK(&pf->msg_task, enetc_msg_task); - - for (i = 0; i < pf->num_vfs; i++) { - err = enetc_msg_alloc_mbx(si, i); - if (err) - goto err_init_mbx; - } - /* enable MR interrupts */ enetc_msg_enable_mr_int(pf); return 0; -err_init_mbx: +free_mbx: for (i--; i >= 0; i--) enetc_msg_free_mbx(si, i); - free_irq(vector, si); - return err; } @@ -160,14 +158,17 @@ void enetc_msg_psi_free(struct enetc_pf *pf) struct enetc_si *si = pf->si; int i; + /* disable MR interrupts */ + enetc_msg_disable_mr_int(pf); + + /* de-register message passing interrupt handler */ + free_irq(pci_irq_vector(si->pdev, ENETC_SI_INT_IDX), si); + cancel_work_sync(&pf->msg_task); - /* disable MR interrupts */ + /* MR interrupts may be re-enabled by workqueue */ enetc_msg_disable_mr_int(pf); for (i = 0; i < pf->num_vfs; i++) enetc_msg_free_mbx(si, i); - - /* de-register message passing interrupt handler */ - free_irq(pci_irq_vector(si->pdev, ENETC_SI_INT_IDX), si); } -- cgit v1.2.3 From 9e68817f12d5935dbf73f2fe6e6299644f6de1b6 Mon Sep 17 00:00:00 2001 From: Wei Fang Date: Wed, 20 May 2026 14:44:21 +0800 Subject: net: enetc: avoid VF->PF mailbox timeout during SR-IOV teardown During SR-IOV teardown, enetc_msg_psi_free() disables the MR interrupt before pci_disable_sriov() removes the VFs. If a VF sends a mailbox message during this window, the PF cannot receive it, causing the VF to timeout waiting for a reply. Since the timeout occurs during SR-IOV teardown when the VF is about to be removed anyway, it has no functional impact on operation. However, more messages will be added in the future, some visible error logs may confuse users. So fix it by calling pci_disable_sriov() first to remove all VFs, then safely clean up the mailbox resources. This eliminates the race window where VFs could send messages to an unresponsive PF. Fixes: beb74ac878c8 ("enetc: Add vf to pf messaging support") Signed-off-by: Wei Fang Reviewed-by: Harshitha Ramamurthy Link: https://patch.msgid.link/20260520064421.91569-10-wei.fang@nxp.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/freescale/enetc/enetc_pf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c index 8e11a023d516..3206b3daa1a0 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c @@ -563,9 +563,9 @@ static int enetc_sriov_configure(struct pci_dev *pdev, int num_vfs) int err; if (!num_vfs) { + pci_disable_sriov(pdev); enetc_msg_psi_free(pf); pf->num_vfs = 0; - pci_disable_sriov(pdev); } else { pf->num_vfs = num_vfs; -- cgit v1.2.3 From d1ebfce2c1d161186a82e77590bf7da2ea1bce91 Mon Sep 17 00:00:00 2001 From: Michael Bommarito Date: Sun, 17 May 2026 20:11:50 -0400 Subject: smb: client: require net admin for CIFS SWN netlink CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The intended sender is the cifs.witness helper, but the generic-netlink operation currently has no capability flag, so any local process can send RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness handler. The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group capability flags. Register messages sent to that group include the witness registration id and, for NTLM-authenticated mounts, the username, domain, and password attributes copied from the CIFS session. An unprivileged local process should not be able to join that group and receive those messages. Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The cifs.witness service runs with the privileges needed for both operations. Fixes: fed979a7e082 ("cifs: Set witness notification handler for messages from userspace daemon") Cc: stable@vger.kernel.org Signed-off-by: Michael Bommarito Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Steve French --- fs/smb/client/netlink.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/smb/client/netlink.c b/fs/smb/client/netlink.c index 147d9409252c..0dd10913c37a 100644 --- a/fs/smb/client/netlink.c +++ b/fs/smb/client/netlink.c @@ -33,13 +33,17 @@ static const struct nla_policy cifs_genl_policy[CIFS_GENL_ATTR_MAX + 1] = { static const struct genl_ops cifs_genl_ops[] = { { .cmd = CIFS_GENL_CMD_SWN_NOTIFY, + .flags = GENL_ADMIN_PERM, .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP, .doit = cifs_swn_notify, }, }; static const struct genl_multicast_group cifs_genl_mcgrps[] = { - [CIFS_GENL_MCGRP_SWN] = { .name = CIFS_GENL_MCGRP_SWN_NAME }, + [CIFS_GENL_MCGRP_SWN] = { + .name = CIFS_GENL_MCGRP_SWN_NAME, + .flags = GENL_MCAST_CAP_NET_ADMIN, + }, }; struct genl_family cifs_genl_family = { -- cgit v1.2.3 From dcd4313f0987d69c4134c12bbe3a8cdf795f6c1e Mon Sep 17 00:00:00 2001 From: Fredric Cover Date: Wed, 13 May 2026 13:19:15 -0700 Subject: smb: client: change allocation requirements in DUP_CTX_STR macro Currently, the macro DUP_CTX_STR allocates new_ctx->field using GFP_ATOMIC. DUP_CTX_STR is only used in smb3_fs_context_dup(), which is never called in an atomic context. Using GFP_ATOMIC puts unnecessary pressure on emergency memory pools. Change GFP_ATOMIC to GFP_KERNEL. Signed-off-by: Fredric Cover Signed-off-by: Steve French --- fs/smb/client/fs_context.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/smb/client/fs_context.c b/fs/smb/client/fs_context.c index 4c8b1b9ade8b..2f86158f85d7 100644 --- a/fs/smb/client/fs_context.c +++ b/fs/smb/client/fs_context.c @@ -420,7 +420,7 @@ static int parse_symlink_flavor(struct fs_context *fc, char *value, #define DUP_CTX_STR(field) \ do { \ if (ctx->field) { \ - new_ctx->field = kstrdup(ctx->field, GFP_ATOMIC); \ + new_ctx->field = kstrdup(ctx->field, GFP_KERNEL); \ if (new_ctx->field == NULL) { \ smb3_cleanup_fs_context_contents(new_ctx); \ return -ENOMEM; \ -- cgit v1.2.3 From 0c1a9dce208b4dc265925898e5da98934f7f9266 Mon Sep 17 00:00:00 2001 From: Samuele Mariotti Date: Thu, 21 May 2026 12:59:11 +0200 Subject: sched_ext: Fix spurious WARN on stale ops_state in ops_dequeue() ops_dequeue() can race with finish_dispatch() and spuriously trigger the "queued task must be in BPF scheduler's custody" warning. ops_dequeue() snapshots p->scx.ops_state via atomic_long_read_acquire() and then, in the SCX_OPSS_QUEUED arm, asserts that SCX_TASK_IN_CUSTODY is set. The two reads are not atomic w.r.t. a concurrent finish_dispatch() running on another CPU: CPU 1 CPU 2 ===== ===== dequeue_task_scx() ops_dequeue() opss = read_acquire(ops_state) = SCX_OPSS_QUEUED finish_dispatch() cmpxchg ops_state: SCX_OPSS_QUEUED -> SCX_OPSS_DISPATCHING [succeeds] dispatch_enqueue(SCX_DSQ_GLOBAL, SCX_ENQ_CLEAR_OPSS) call_task_dequeue() p->scx.flags &= ~SCX_TASK_IN_CUSTODY WARN_ON_ONCE(!(p->scx.flags & SCX_TASK_IN_CUSTODY)) /* opss is stale: QUEUED, * but task already claimed */ set_release(ops_state, SCX_OPSS_NONE) The race has been observed via two distinct call chains: the most common goes through sched_setaffinity(), a rarer variant through sched_change_begin(). For SCX_DSQ_GLOBAL / SCX_DSQ_BYPASS, dispatch_enqueue() clears SCX_TASK_IN_CUSTODY before clearing ops_state to SCX_OPSS_NONE (intentional, to avoid concurrent non-atomic RMW of p->scx.flags against ops_dequeue()). The window between those two writes is exactly what ops_dequeue() observes as "QUEUED without custody". The observed state is not actually inconsistent, it just means CPU 1 has already claimed the task and the QUEUED value held by CPU 2 is stale. Re-read ops_state in that case; the next read is guaranteed to return SCX_OPSS_DISPATCHING or SCX_OPSS_NONE, both of which exit the switch cleanly. The retry is bounded: once IN_CUSTODY is cleared, ops_state has already advanced past QUEUED for this dispatch cycle, and a fresh QUEUED would require re-enqueue under p's rq lock, which CPU 2 holds. Changes in v2: - Use READ_ONCE() for p->scx.flags to ensure fresh reads and prevent compiler reordering in the lockless path - Add cpu_relax() to reduce power consumption and improve performance during the spin-wait - Use unlikely() to optimize branch prediction for the common case - Expand the in-code comment to document the race condition and bounded retry guarantee Fixes: ebf1ccff79c4 ("sched_ext: Fix ops.dequeue() semantics") Suggested-by: Andrea Righi Signed-off-by: Samuele Mariotti Signed-off-by: Paolo Valente Signed-off-by: Tejun Heo --- kernel/sched/ext.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/kernel/sched/ext.c b/kernel/sched/ext.c index 547ca398f646..c1762420cc35 100644 --- a/kernel/sched/ext.c +++ b/kernel/sched/ext.c @@ -2078,6 +2078,7 @@ static void ops_dequeue(struct rq *rq, struct task_struct *p, u64 deq_flags) /* dequeue is always temporary, don't reset runnable_at */ clr_task_runnable(p, false); +retry: /* acquire ensures that we see the preceding updates on QUEUED */ opss = atomic_long_read_acquire(&p->scx.ops_state); @@ -2091,8 +2092,20 @@ static void ops_dequeue(struct rq *rq, struct task_struct *p, u64 deq_flags) */ BUG(); case SCX_OPSS_QUEUED: - /* A queued task must always be in BPF scheduler's custody */ - WARN_ON_ONCE(!(p->scx.flags & SCX_TASK_IN_CUSTODY)); + /* + * A queued task must always be in BPF scheduler's custody. If + * SCX_TASK_IN_CUSTODY is clear, finish_dispatch() on another + * CPU has already passed call_task_dequeue() (which clears the + * flag), but has not yet written SCX_OPSS_NONE. That final + * store does not require this rq's lock, so retrying with + * cpu_relax() is bounded: we will observe NONE (or DISPATCHING, + * handled by the fallthrough) on a subsequent iteration. + */ + if (unlikely(!(READ_ONCE(p->scx.flags) & SCX_TASK_IN_CUSTODY))) { + cpu_relax(); + goto retry; + } + if (atomic_long_try_cmpxchg(&p->scx.ops_state, &opss, SCX_OPSS_NONE)) break; -- cgit v1.2.3 From e97ff8b62d4690c69297f0f6de874f0564cc01a4 Mon Sep 17 00:00:00 2001 From: "Alexander A. Klimov" Date: Wed, 20 May 2026 20:00:44 +0200 Subject: io_uring/nop: pass all errors to userspace This fixes an inconsistency where io_nop() called req_set_fail() based on ret, but passed just nop->result to userspace. Originally, ret is a even copy of nop->result, but is set to an error when such happens subsequently. Now that's also passed to userspace. Fixes: a85f31052bce ("io_uring/nop: add support for testing registered files and buffers") Signed-off-by: Alexander A. Klimov Link: https://patch.msgid.link/20260520180045.538533-1-grandmaster@al2klimov.de Signed-off-by: Jens Axboe --- io_uring/nop.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/io_uring/nop.c b/io_uring/nop.c index 3caf07878f8a..f5c9969e7f64 100644 --- a/io_uring/nop.c +++ b/io_uring/nop.c @@ -79,9 +79,9 @@ done: if (ret < 0) req_set_fail(req); if (nop->flags & IORING_NOP_CQE32) - io_req_set_res32(req, nop->result, 0, nop->extra1, nop->extra2); + io_req_set_res32(req, ret, 0, nop->extra1, nop->extra2); else - io_req_set_res(req, nop->result, 0); + io_req_set_res(req, ret, 0); if (nop->flags & IORING_NOP_TW) { req->io_task_work.func = io_req_task_complete; io_req_task_work_add(req); -- cgit v1.2.3 From c9b7598eb013c6dbf2526dc050364bd8dc24f0d3 Mon Sep 17 00:00:00 2001 From: Cosmin Tanislav Date: Wed, 20 May 2026 23:31:15 +0300 Subject: irqchip/renesas-rzt2h: Use pm_runtime_put_sync() in probe error path pm_runtime_put() may trigger the idle check after pm_runtime_disable() is run as part of devm_pm_runtime_enable()'s cleanup action, leaving runtime PM active. Use pm_runtime_put_sync() to ensure the idle check runs synchronously. Fixes: 13e7b3305b64 ("irqchip: Add RZ/{T2H,N2H} Interrupt Controller (ICU) driver") Signed-off-by: Cosmin Tanislav Signed-off-by: Thomas Gleixner Link: https://patch.msgid.link/20260520203117.1516442-2-cosmin-gabriel.tanislav.xa@renesas.com --- drivers/irqchip/irq-renesas-rzt2h.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-renesas-rzt2h.c b/drivers/irqchip/irq-renesas-rzt2h.c index 53cf80e1155a..ecb69da55508 100644 --- a/drivers/irqchip/irq-renesas-rzt2h.c +++ b/drivers/irqchip/irq-renesas-rzt2h.c @@ -265,7 +265,7 @@ static int rzt2h_icu_init(struct platform_device *pdev, struct device_node *pare irq_domain = irq_domain_create_hierarchy(parent_domain, 0, RZT2H_ICU_NUM_IRQ, dev_fwnode(dev), &rzt2h_icu_domain_ops, priv); if (!irq_domain) { - pm_runtime_put(dev); + pm_runtime_put_sync(dev); return -ENOMEM; } -- cgit v1.2.3 From dc278e9bf2b9513a763353e6b9cc21e0f532954e Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Thu, 21 May 2026 12:02:53 -0700 Subject: blk-mq: pop cached request if it is usable When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it. Fixes: b0077e269f6c1 ("blk-mq: make sure active queue usage is held for bio_integrity_prep()") Fixes: 7b4f36cd22a65 ("block: ensure we hold a queue reference when using queue limits") Signed-off-by: Keith Busch Link: https://patch.msgid.link/20260521190253.242065-1-kbusch@meta.com Signed-off-by: Jens Axboe --- block/blk-mq.c | 34 +++++++++------------------------- 1 file changed, 9 insertions(+), 25 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index d0c37daf568f..28c2d931e75e 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -3077,7 +3077,7 @@ static struct request *blk_mq_get_new_requests(struct request_queue *q, /* * Check if there is a suitable cached request and return it. */ -static struct request *blk_mq_peek_cached_request(struct blk_plug *plug, +static struct request *blk_mq_get_cached_request(struct blk_plug *plug, struct request_queue *q, blk_opf_t opf) { enum hctx_type type = blk_mq_get_hctx_type(opf); @@ -3093,27 +3093,10 @@ static struct request *blk_mq_peek_cached_request(struct blk_plug *plug, return NULL; if (op_is_flush(rq->cmd_flags) != op_is_flush(opf)) return NULL; + rq_list_pop(&plug->cached_rqs); return rq; } -static void blk_mq_use_cached_rq(struct request *rq, struct blk_plug *plug, - struct bio *bio) -{ - if (rq_list_pop(&plug->cached_rqs) != rq) - WARN_ON_ONCE(1); - - /* - * If any qos ->throttle() end up blocking, we will have flushed the - * plug and hence killed the cached_rq list as well. Pop this entry - * before we throttle. - */ - rq_qos_throttle(rq->q, bio); - - blk_mq_rq_time_init(rq, blk_time_get_ns()); - rq->cmd_flags = bio->bi_opf; - INIT_LIST_HEAD(&rq->queuelist); -} - static bool bio_unaligned(const struct bio *bio, struct request_queue *q) { unsigned int bs_mask = queue_logical_block_size(q) - 1; @@ -3152,7 +3135,7 @@ void blk_mq_submit_bio(struct bio *bio) /* * If the plug has a cached request for this queue, try to use it. */ - rq = blk_mq_peek_cached_request(plug, q, bio->bi_opf); + rq = blk_mq_get_cached_request(plug, q, bio->bi_opf); /* * A BIO that was released from a zone write plug has already been @@ -3211,7 +3194,10 @@ void blk_mq_submit_bio(struct bio *bio) new_request: if (rq) { - blk_mq_use_cached_rq(rq, plug, bio); + rq_qos_throttle(rq->q, bio); + blk_mq_rq_time_init(rq, blk_time_get_ns()); + rq->cmd_flags = bio->bi_opf; + INIT_LIST_HEAD(&rq->queuelist); } else { rq = blk_mq_get_new_requests(q, plug, bio); if (unlikely(!rq)) { @@ -3257,12 +3243,10 @@ new_request: return; queue_exit: - /* - * Don't drop the queue reference if we were trying to use a cached - * request and thus didn't acquire one. - */ if (!rq) blk_queue_exit(q); + else + blk_mq_free_request(rq); } #ifdef CONFIG_BLK_MQ_STACKING -- cgit v1.2.3 From 27cd2dde35b2c3b8659fa18f6a935c61fedee5c1 Mon Sep 17 00:00:00 2001 From: Zhengyu He Date: Thu, 21 May 2026 22:44:45 +0800 Subject: spi: dt-bindings: fsl-qspi: support SpacemiT K3 Add the SpacemiT K3 QSPI compatible to the fsl-qspi binding. K3 and K1 use the same QSPI controller, so document the K3 compatible with "spacemit,k1-qspi" as fallback. Signed-off-by: Cody Kang Signed-off-by: Zhengyu He Acked-by: Conor Dooley Link: https://patch.msgid.link/20260521-k3-pico-itx-qspi-v2-for-next-20260521-v2-1-52bce26e5fd8@gmail.com Signed-off-by: Mark Brown --- Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml index 1d10cfbad86c..504df31a4f90 100644 --- a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml +++ b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-qspi.yaml @@ -20,6 +20,9 @@ properties: - fsl,ls1021a-qspi - fsl,ls2080a-qspi - spacemit,k1-qspi + - items: + - const: spacemit,k3-qspi + - const: spacemit,k1-qspi - items: - enum: - fsl,ls1043a-qspi -- cgit v1.2.3 From 3515503322f4819277091839eed46b695096aca5 Mon Sep 17 00:00:00 2001 From: Junyi Liu Date: Mon, 18 May 2026 23:27:19 +0900 Subject: ksmbd: fix durable reconnect error path file lifetime After a durable reconnect succeeds, ksmbd_reopen_durable_fd() republishes the same ksmbd_file into the session volatile-id table. If smb2_open() then takes a later error path, cleanup first calls ksmbd_fd_put(work, fp) and then unconditionally calls ksmbd_put_durable_fd(dh_info.fp). In this case fp and dh_info.fp are the same object. The first put drops the reconnect lookup reference, but the final durable put can run __ksmbd_close_fd(NULL, fp). Because the final close is not session-aware, it can free the file object without removing the volatile-id entry that was just published into the session table. Use the session-aware put for the final reconnect drop when the reconnect had already succeeded and the error path is cleaning up the republished file. Earlier reconnect failures, before fp is assigned to dh_info.fp, keep using the durable-only put path. Fixes: 1baff47b81f9 ("ksmbd: fix use-after-free in smb2_open during durable reconnect") Signed-off-by: Junyi Liu Acked-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smb2pdu.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/fs/smb/server/smb2pdu.c b/fs/smb/server/smb2pdu.c index 62d4399a993d..5128a693aca6 100644 --- a/fs/smb/server/smb2pdu.c +++ b/fs/smb/server/smb2pdu.c @@ -3804,8 +3804,19 @@ err_out2: ksmbd_debug(SMB, "Error response: %x\n", rsp->hdr.Status); } - if (dh_info.reconnected) - ksmbd_put_durable_fd(dh_info.fp); + if (dh_info.reconnected) { + /* + * If reconnect succeeded, fp was republished in the + * session file table. On a later error, ksmbd_fd_put() + * above drops the session reference; drop the durable + * lookup reference through the same session-aware path so + * final close removes the volatile id before freeing fp. + */ + if (rc && fp == dh_info.fp) + ksmbd_fd_put(work, dh_info.fp); + else + ksmbd_put_durable_fd(dh_info.fp); + } kfree(name); kfree(lc); -- cgit v1.2.3 From 69f030cf95488ae1186c72ac8c66fd279664ea7f Mon Sep 17 00:00:00 2001 From: Junyi Liu Date: Tue, 19 May 2026 16:12:04 +0900 Subject: ksmbd: validate SID in parent security descriptor during ACL inheritance Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved from the parent directory. Cc: stable@vger.kernel.org Signed-off-by: Junyi Liu Signed-off-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/smbacl.c | 66 ++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 50 insertions(+), 16 deletions(-) diff --git a/fs/smb/server/smbacl.c b/fs/smb/server/smbacl.c index 9161e9d7ed24..c2d9be52a311 100644 --- a/fs/smb/server/smbacl.c +++ b/fs/smb/server/smbacl.c @@ -1096,6 +1096,40 @@ static int smb_append_inherited_ace(struct smb_ace **ace, int *nt_size, return 0; } +static int smb_validate_ntsd_sid(struct smb_ntsd *pntsd, size_t pntsd_size, + unsigned int sid_offset, struct smb_sid **sid, + size_t *sid_size) +{ + size_t sid_end; + + *sid = NULL; + *sid_size = 0; + + if (!sid_offset) + return 0; + + if (sid_offset < sizeof(struct smb_ntsd) || + check_add_overflow(sid_offset, (size_t)CIFS_SID_BASE_SIZE, + &sid_end) || + sid_end > pntsd_size) + return -EINVAL; + + *sid = (struct smb_sid *)((char *)pntsd + sid_offset); + if ((*sid)->num_subauth > SID_MAX_SUB_AUTHORITIES) + return -EINVAL; + + if (check_add_overflow((size_t)CIFS_SID_BASE_SIZE, + sizeof(__le32) * (size_t)(*sid)->num_subauth, + &sid_end)) + return -EINVAL; + + if (sid_offset > pntsd_size || sid_end > pntsd_size - sid_offset) + return -EINVAL; + + *sid_size = sid_end; + return 0; +} + int smb_inherit_dacl(struct ksmbd_conn *conn, const struct path *path, unsigned int uid, unsigned int gid) @@ -1108,28 +1142,28 @@ int smb_inherit_dacl(struct ksmbd_conn *conn, struct dentry *parent = path->dentry->d_parent; struct mnt_idmap *idmap = mnt_idmap(path->mnt); int inherited_flags = 0, flags = 0, i, nt_size = 0, pdacl_size; - int rc = 0, pntsd_type, pntsd_size, acl_len, aces_size; + int rc = 0, pntsd_type, ppntsd_size, acl_len, aces_size; unsigned int dacloffset; size_t dacl_struct_end; u16 num_aces, ace_cnt = 0; char *aces_base; bool is_dir = S_ISDIR(d_inode(path->dentry)->i_mode); - pntsd_size = ksmbd_vfs_get_sd_xattr(conn, idmap, + ppntsd_size = ksmbd_vfs_get_sd_xattr(conn, idmap, parent, &parent_pntsd); - if (pntsd_size <= 0) + if (ppntsd_size <= 0) return -ENOENT; dacloffset = le32_to_cpu(parent_pntsd->dacloffset); if (!dacloffset || check_add_overflow(dacloffset, sizeof(struct smb_acl), &dacl_struct_end) || - dacl_struct_end > (size_t)pntsd_size) { + dacl_struct_end > (size_t)ppntsd_size) { rc = -EINVAL; goto free_parent_pntsd; } parent_pdacl = (struct smb_acl *)((char *)parent_pntsd + dacloffset); - acl_len = pntsd_size - dacloffset; + acl_len = ppntsd_size - dacloffset; num_aces = le16_to_cpu(parent_pdacl->num_aces); pntsd_type = le16_to_cpu(parent_pntsd->type); pdacl_size = le16_to_cpu(parent_pdacl->size); @@ -1243,19 +1277,19 @@ pass: struct smb_ntsd *pntsd; struct smb_acl *pdacl; struct smb_sid *powner_sid = NULL, *pgroup_sid = NULL; - int powner_sid_size = 0, pgroup_sid_size = 0, pntsd_size; + size_t powner_sid_size = 0, pgroup_sid_size = 0, pntsd_size; size_t pntsd_alloc_size; - if (parent_pntsd->osidoffset) { - powner_sid = (struct smb_sid *)((char *)parent_pntsd + - le32_to_cpu(parent_pntsd->osidoffset)); - powner_sid_size = 1 + 1 + 6 + (powner_sid->num_subauth * 4); - } - if (parent_pntsd->gsidoffset) { - pgroup_sid = (struct smb_sid *)((char *)parent_pntsd + - le32_to_cpu(parent_pntsd->gsidoffset)); - pgroup_sid_size = 1 + 1 + 6 + (pgroup_sid->num_subauth * 4); - } + rc = smb_validate_ntsd_sid(parent_pntsd, ppntsd_size, + le32_to_cpu(parent_pntsd->osidoffset), + &powner_sid, &powner_sid_size); + if (rc) + goto free_aces_base; + rc = smb_validate_ntsd_sid(parent_pntsd, ppntsd_size, + le32_to_cpu(parent_pntsd->gsidoffset), + &pgroup_sid, &pgroup_sid_size); + if (rc) + goto free_aces_base; if (check_add_overflow(sizeof(struct smb_ntsd), (size_t)powner_sid_size, -- cgit v1.2.3 From 4ec9c8e023c79f613fe4d5ad8cc737112efb2e44 Mon Sep 17 00:00:00 2001 From: ChenXiaoSong Date: Mon, 18 May 2026 15:23:22 +0000 Subject: smb/server: promote S_DEL_ON_CLS to S_DEL_PENDING when close Reproducer: 1. server: systemctl start ksmbd 2. client: mount -t cifs //${server_ip}/export /mnt 3. client: C program: openat(AT_FDCWD, "/mnt", O_RDWR | O_TMPFILE, 0600) Do not treat `FILE_DELETE_ON_CLOSE_LE` as delete pending while files remain open. This patch fixes xfstests generic/004. Cc: stable@vger.kernel.org Link: https://chenxiaosong.com/en/smb-xfstests-generic-004.html Co-developed-by: Huiwen He Signed-off-by: Huiwen He Signed-off-by: ChenXiaoSong Tested-by: Steve French Acked-by: Namjae Jeon Signed-off-by: Steve French --- fs/smb/server/vfs_cache.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/fs/smb/server/vfs_cache.c b/fs/smb/server/vfs_cache.c index 913164c958b1..5a232d94f567 100644 --- a/fs/smb/server/vfs_cache.c +++ b/fs/smb/server/vfs_cache.c @@ -211,7 +211,7 @@ int ksmbd_query_inode_status(struct dentry *dentry) return ret; down_read(&ci->m_lock); - if (ci->m_flags & (S_DEL_PENDING | S_DEL_ON_CLS)) + if (ci->m_flags & S_DEL_PENDING) ret = KSMBD_INODE_STATUS_PENDING_DELETE; else ret = KSMBD_INODE_STATUS_OK; @@ -227,7 +227,7 @@ bool ksmbd_inode_pending_delete(struct ksmbd_file *fp) int ret; down_read(&ci->m_lock); - ret = (ci->m_flags & (S_DEL_PENDING | S_DEL_ON_CLS)); + ret = (ci->m_flags & S_DEL_PENDING); up_read(&ci->m_lock); return ret; @@ -395,12 +395,20 @@ static void __ksmbd_inode_close(struct ksmbd_file *fp) } } + down_write(&ci->m_lock); + /* Promote S_DEL_ON_CLS to S_DEL_PENDING when close */ + if (ci->m_flags & S_DEL_ON_CLS) { + ci->m_flags &= ~S_DEL_ON_CLS; + ci->m_flags |= S_DEL_PENDING; + } + up_write(&ci->m_lock); + if (atomic_dec_and_test(&ci->m_count)) { bool do_unlink = false; down_write(&ci->m_lock); - if (ci->m_flags & (S_DEL_ON_CLS | S_DEL_PENDING)) { - ci->m_flags &= ~(S_DEL_ON_CLS | S_DEL_PENDING); + if (ci->m_flags & S_DEL_PENDING) { + ci->m_flags &= ~S_DEL_PENDING; do_unlink = true; } up_write(&ci->m_lock); -- cgit v1.2.3 From 7734b168cad167a43e5bda19bc8ccc65669ec964 Mon Sep 17 00:00:00 2001 From: Simon Schuster Date: Thu, 21 May 2026 14:46:28 +0200 Subject: MAINTAINERS: arch/nios2: Add Simon Schuster as co-maintainer Add Simon Schuster as a co-maintainer for the nios2 architecture and mark it as supported. Signed-off-by: Simon Schuster Acked-by: Arnd Bergmann Signed-off-by: Dinh Nguyen --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 2fb1c75afd16..ab70c209bec2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18898,7 +18898,8 @@ F: drivers/hid/hid-nintendo* NIOS2 ARCHITECTURE M: Dinh Nguyen -S: Maintained +M: Simon Schuster +S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git F: arch/nios2/ -- cgit v1.2.3 From e90ef85ada857819313000cc50c6edfcddec6850 Mon Sep 17 00:00:00 2001 From: Marco Elver Date: Thu, 21 May 2026 14:23:55 +0200 Subject: nios2: Implement _THIS_IP_ using inline asm Both GCC [1] and Clang [2] consider the generic version of _THIS_IP_ to be broken: #define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; }) In particular, the address of a label is only expected to be used with a computed goto. While the generic version more or less works today, it is known to be brittle and may break with current and future optimizations. For example, Clang -O2 always returns 1 when this function is inlined: static inline unsigned long get_ip(void) { return ({ __label__ __here; __here: (unsigned long)&&__here; }); } Fix it by overriding _THIS_IP_ in (which is included by ) using an architecture-specific inline asm version. Additionally, avoiding taking the address of a label prevents compilers from emitting spurious indirect branch targets (e.g. ENDBR or BTI) under control-flow integrity schemes. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=120071 [1] Link: https://github.com/llvm/llvm-project/issues/138272 [2] Signed-off-by: Marco Elver Reviewed-by: David Laight Signed-off-by: Dinh Nguyen --- arch/nios2/include/asm/linkage.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/nios2/include/asm/linkage.h b/arch/nios2/include/asm/linkage.h index 211302301a8a..c4073235852b 100644 --- a/arch/nios2/include/asm/linkage.h +++ b/arch/nios2/include/asm/linkage.h @@ -12,4 +12,6 @@ #define __ALIGN .align 4 #define __ALIGN_STR ".align 4" +#define _THIS_IP_ ({ unsigned long __ip; asm volatile("nextpc %0" : "=r" (__ip)); __ip; }) + #endif -- cgit v1.2.3 From e3ef9a28f558d1cbf0b42d6dcd16c60da557562b Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Fri, 22 May 2026 15:05:07 +0800 Subject: LoongArch: kprobes: Use larch_insn_text_copy() to patch instructions On SMP systems, kprobe handlers would occasionally fail to execute on certain CPU cores. The issue is hard to reproduce and typically occurs randomly under high system load. The root cause is a software-side instruction hazard. According to the LoongArch Reference Manual, while the cache coherency is maintained by hardware, software must explicitly use the "IBAR" instruction to ensure the instruction fetch unit (IFU) observes the effects of recent stores. The current arch_arm_kprobe() and arch_disarm_kprobe() only execute the "IBAR" barrier (via flush_insn_slot -> local_flush_icache_range) on the local CPU. This leaves a vulnerable window where remote CPU cores may continue executing stale instructions from their pipelines or prefetch buffers, as they have not executed an "IBAR" since the code modification. Switch to larch_insn_text_copy() to fix this: 1. Synchronization: It uses stop_machine_cpuslocked() to synchronize all online CPUs, ensuring no CPU is executing the target code area during modification. 2. Visibility: By passing cpu_online_mask to stop_machine_cpuslocked(), the callback text_copy_cb() is executed on all online cores. Each CPU core invokes local_flush_icache_range() to execute "IBAR", clearing instruction hazards system-wide and ensuring the "break" instruction is visible to the fetch units of all cores. 3. Robustness: It properly manages memory write permissions (ROX/RW) for the kernel text segment during patching, ensuring compatibility with CONFIG_STRICT_KERNEL_RWX. Cc: # 6.18+ Fixes: 6d4cc40fb5f5 ("LoongArch: Add kprobes support") Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen --- arch/loongarch/kernel/kprobes.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/loongarch/kernel/kprobes.c b/arch/loongarch/kernel/kprobes.c index 8ba391cfabb0..04b5b05715cd 100644 --- a/arch/loongarch/kernel/kprobes.c +++ b/arch/loongarch/kernel/kprobes.c @@ -60,16 +60,18 @@ NOKPROBE_SYMBOL(arch_prepare_kprobe); /* Install breakpoint in text */ void arch_arm_kprobe(struct kprobe *p) { - *p->addr = KPROBE_BP_INSN; - flush_insn_slot(p); + u32 insn = KPROBE_BP_INSN; + + larch_insn_text_copy(p->addr, &insn, LOONGARCH_INSN_SIZE); } NOKPROBE_SYMBOL(arch_arm_kprobe); /* Remove breakpoint from text */ void arch_disarm_kprobe(struct kprobe *p) { - *p->addr = p->opcode; - flush_insn_slot(p); + u32 insn = p->opcode; + + larch_insn_text_copy(p->addr, &insn, LOONGARCH_INSN_SIZE); } NOKPROBE_SYMBOL(arch_disarm_kprobe); -- cgit v1.2.3 From 1c856e158fd34ef2c4475a81c1dc386329989938 Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Fri, 22 May 2026 15:05:07 +0800 Subject: LoongArch: kprobes: Fix handling of fatal unrecoverable recursions KPROBE_HIT_SS and KPROBE_REENTER are two types of fatal recursions that can not be safely recovered in kprobes. KPROBE_HIT_SS means that a kprobe is hit during single-stepping. At this point, the architecture-specific single-step context is already active. Nested single-stepping would corrupt the state, as the kprobe control block (kcb) and hardware registers cannot safely store multiple levels of stepping state. KPROBE_REENTER means that a third-level recursion occurs when a probe is hit while the system is already handling a nested probe (second- level). The kcb only provides a single slot (prev_kprobe) to backup the state. When a third probe is hit, there is no more space to save the state without corrupting the first-level backup. Kprobes work by replacing instructions with breakpoints. In order to execute the original instruction and continue, it must be moved to a temporary "single-step" slot. Since there is no backup space left to set up this slot safely, the CPU would be forced to return to the same original breakpoint address, triggering an endless loop. Currently, the code only prints a warning and returns. This leads to an infinite re-entry loop as the CPU repeatedly hits the same trap and a "stuck" CPU core because preemption was disabled at the start of the handler and never re-enabled in this early return path. Fix the logic by: 1. Merging KPROBE_HIT_SS and KPROBE_REENTER cases, as both represent fatal recursions that cannot be safely recovered. 2. Replacing WARN_ON_ONCE() with BUG() to terminate the system. This aligns LoongArch with other architectures (x86, arm64, riscv) and prevents stack overflow while providing diagnostic information. Fixes: 6d4cc40fb5f5 ("LoongArch: Add kprobes support") Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen --- arch/loongarch/kernel/kprobes.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/loongarch/kernel/kprobes.c b/arch/loongarch/kernel/kprobes.c index 04b5b05715cd..1985ed30dd16 100644 --- a/arch/loongarch/kernel/kprobes.c +++ b/arch/loongarch/kernel/kprobes.c @@ -186,16 +186,16 @@ static bool reenter_kprobe(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) { switch (kcb->kprobe_status) { - case KPROBE_HIT_SS: case KPROBE_HIT_SSDONE: case KPROBE_HIT_ACTIVE: kprobes_inc_nmissed_count(p); setup_singlestep(p, regs, kcb, 1); break; + case KPROBE_HIT_SS: case KPROBE_REENTER: pr_warn("Failed to recover from reentered kprobes.\n"); dump_kprobe(p); - WARN_ON_ONCE(1); + BUG(); break; default: WARN_ON(1); -- cgit v1.2.3 From 4a09f4a23a3003d31f8545dd0770f2b3b0f54d8b Mon Sep 17 00:00:00 2001 From: Bibo Mao Date: Fri, 22 May 2026 15:05:12 +0800 Subject: LoongArch: KVM: Move some variable declarations to paravirt.h Some variables relative with paravirt feature are declared in the header file asm/qspinlock.h, however this file can be included only when option CONFIG_SMP is on. There is compiling warnings if CONFIG_SMP is off since variables are not declared. Move these variable declarations to header file asm/paravirt.h to avoid compiling warnings. Fixes: c43dce6f13fb ("LoongArch: KVM: Make vcpu_is_preempted() as a macro rather than function") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202605061313.O8Hswm2b-lkp@intel.com/ Signed-off-by: Bibo Mao Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/paravirt.h | 6 ++++++ arch/loongarch/include/asm/qspinlock.h | 5 +---- 2 files changed, 7 insertions(+), 4 deletions(-) diff --git a/arch/loongarch/include/asm/paravirt.h b/arch/loongarch/include/asm/paravirt.h index 0111f0ad5f73..acae1c5e5f88 100644 --- a/arch/loongarch/include/asm/paravirt.h +++ b/arch/loongarch/include/asm/paravirt.h @@ -4,6 +4,12 @@ #ifdef CONFIG_PARAVIRT +#include + +DECLARE_STATIC_KEY_FALSE(virt_preempt_key); +DECLARE_STATIC_KEY_FALSE(virt_spin_lock_key); +DECLARE_PER_CPU(struct kvm_steal_time, steal_time); + int __init pv_ipi_init(void); int __init pv_time_init(void); int __init pv_spinlock_init(void); diff --git a/arch/loongarch/include/asm/qspinlock.h b/arch/loongarch/include/asm/qspinlock.h index 0ee15b3b3937..fbfc6be82f26 100644 --- a/arch/loongarch/include/asm/qspinlock.h +++ b/arch/loongarch/include/asm/qspinlock.h @@ -3,12 +3,9 @@ #define _ASM_LOONGARCH_QSPINLOCK_H #include -#include +#include #ifdef CONFIG_PARAVIRT -DECLARE_STATIC_KEY_FALSE(virt_preempt_key); -DECLARE_STATIC_KEY_FALSE(virt_spin_lock_key); -DECLARE_PER_CPU(struct kvm_steal_time, steal_time); #define virt_spin_lock virt_spin_lock -- cgit v1.2.3 From d0f2eb4493d1c3c8fecb5eadb5c1382074873ef9 Mon Sep 17 00:00:00 2001 From: Claudio Imbrenda Date: Tue, 19 May 2026 17:01:10 +0200 Subject: KVM: s390: vsie: Fix memory leak when unshadowing When performing a partial unshadowing, the rmap was being leaked. Add the missing kfree(). Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Signed-off-by: Claudio Imbrenda Reviewed-by: Christoph Schlameuss Reviewed-by: Christian Borntraeger Signed-off-by: Christian Borntraeger --- arch/s390/kvm/gmap.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/s390/kvm/gmap.c b/arch/s390/kvm/gmap.c index 3c26e35af0ef..fd1927761980 100644 --- a/arch/s390/kvm/gmap.c +++ b/arch/s390/kvm/gmap.c @@ -1143,8 +1143,10 @@ void _gmap_handle_vsie_unshadow_event(struct gmap *parent, gfn_t gfn) } scoped_guard(spinlock, &sg->host_to_rmap_lock) head = radix_tree_delete(&sg->host_to_rmap, gfn); - gmap_for_each_rmap_safe(rmap, rnext, head) + gmap_for_each_rmap_safe(rmap, rnext, head) { gmap_unshadow_level(sg, rmap->r_gfn, rmap->level); + kfree(rmap); + } } } -- cgit v1.2.3 From 4df4b7cdf54620aa848e7d83d253bb944313f7bd Mon Sep 17 00:00:00 2001 From: Claudio Imbrenda Date: Tue, 19 May 2026 17:01:11 +0200 Subject: KVM: s390: Fix leaking kvm_s390_mmu_cache in case of errors Fix a memory leak that can happen if gmap_ucas_map_one() or kvm_s390_mmu_cache_topup() return error values. Also fix a similar issue in gmap_set_limit(). Signed-off-by: Claudio Imbrenda Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reported-by: Jiaxin Fan Reviewed-by: Christian Borntraeger Signed-off-by: Christian Borntraeger --- arch/s390/kvm/gmap.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/s390/kvm/gmap.c b/arch/s390/kvm/gmap.c index fd1927761980..10c98c8cc1d8 100644 --- a/arch/s390/kvm/gmap.c +++ b/arch/s390/kvm/gmap.c @@ -125,7 +125,7 @@ struct gmap *gmap_new_child(struct gmap *parent, gfn_t limit) int gmap_set_limit(struct gmap *gmap, gfn_t limit) { - struct kvm_s390_mmu_cache *mc; + struct kvm_s390_mmu_cache *mc __free(kvm_s390_mmu_cache) = NULL; int rc, type; type = gmap_limit_to_type(limit); @@ -142,7 +142,6 @@ int gmap_set_limit(struct gmap *gmap, gfn_t limit) rc = dat_set_asce_limit(mc, &gmap->asce, type); } while (rc == -ENOMEM); - kvm_s390_free_mmu_cache(mc); return 0; } @@ -822,8 +821,8 @@ int gmap_ucas_translate(struct kvm_s390_mmu_cache *mc, struct gmap *gmap, gpa_t int gmap_ucas_map(struct gmap *gmap, gfn_t p_gfn, gfn_t c_gfn, unsigned long count) { - struct kvm_s390_mmu_cache *mc; - int rc; + struct kvm_s390_mmu_cache *mc __free(kvm_s390_mmu_cache) = NULL; + int rc = 0; mc = kvm_s390_new_mmu_cache(); if (!mc) -- cgit v1.2.3 From 2d505c290667eba67352c5db303ec92b7de860ad Mon Sep 17 00:00:00 2001 From: Claudio Imbrenda Date: Tue, 19 May 2026 17:01:12 +0200 Subject: KVM: s390: vsie: Fix unshadowing logic In some cases (i.e. under extreme memory pressure on the host), attempting to shadow memory will result in the same memory being unshadowed, causing a loop. Add a PGSTE bit to distinguish between shadowed memory and shadowed DAT tables, fix the unshadowing logic in _gmap_ptep_xchg() to prevent unnecessary unshadowing and perform better checks. Also fix the unshadowing logic in _gmap_crstep_xchg_atomic() which did not unshadow properly when the large page would become unprotected. Opportunistically add a check in gmap_protect_rmap() to make sure it won't be called with level == TABLE_TYPE_PAGE_TABLE. Signed-off-by: Claudio Imbrenda Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reviewed-by: Christian Borntraeger Signed-off-by: Christian Borntraeger --- arch/s390/kvm/dat.c | 1 + arch/s390/kvm/dat.h | 3 ++- arch/s390/kvm/gaccess.c | 1 + arch/s390/kvm/gmap.c | 3 ++- arch/s390/kvm/gmap.h | 60 ++++++++++++++++++++++++++++++++++++++++++++++--- 5 files changed, 63 insertions(+), 5 deletions(-) diff --git a/arch/s390/kvm/dat.c b/arch/s390/kvm/dat.c index 7b8d70fe406d..4a41c0247ffa 100644 --- a/arch/s390/kvm/dat.c +++ b/arch/s390/kvm/dat.c @@ -267,6 +267,7 @@ static int dat_split_ste(struct kvm_s390_mmu_cache *mc, union pmd *pmdp, gfn_t g /* No need to take locks as the page table is not installed yet. */ pgste_init.prefix_notif = old.s.fc1.prefix_notif; pgste_init.vsie_notif = old.s.fc1.vsie_notif; + pgste_init.vsie_gmem = old.s.fc1.vsie_notif; pgste_init.pcl = uses_skeys && init.h.i; dat_init_pgstes(pt, pgste_init.val); } else { diff --git a/arch/s390/kvm/dat.h b/arch/s390/kvm/dat.h index 8f8278c44879..873e13ac5a27 100644 --- a/arch/s390/kvm/dat.h +++ b/arch/s390/kvm/dat.h @@ -145,7 +145,8 @@ union pgste { unsigned long cmma_d : 1; /* Dirty flag for CMMA bits */ unsigned long prefix_notif : 1; /* Guest prefix invalidation notification */ unsigned long vsie_notif : 1; /* Referenced in a shadow table */ - unsigned long : 5; + unsigned long vsie_gmem : 1; /* Contains nested guest memory */ + unsigned long : 4; unsigned long : 8; }; struct { diff --git a/arch/s390/kvm/gaccess.c b/arch/s390/kvm/gaccess.c index b07accd19618..4f8d5592c9a9 100644 --- a/arch/s390/kvm/gaccess.c +++ b/arch/s390/kvm/gaccess.c @@ -1445,6 +1445,7 @@ static int _do_shadow_pte(struct gmap *sg, gpa_t raddr, union pte *ptep_h, union } else { pgste = _gmap_ptep_xchg(sg->parent, ptep_h, newpte, pgste, f->gfn, false); pgste.vsie_notif = 1; + pgste.vsie_gmem = 1; } pgste_set_unlock(ptep_h, pgste); if (rc) diff --git a/arch/s390/kvm/gmap.c b/arch/s390/kvm/gmap.c index 10c98c8cc1d8..8cff0cf5ce24 100644 --- a/arch/s390/kvm/gmap.c +++ b/arch/s390/kvm/gmap.c @@ -1031,7 +1031,8 @@ int gmap_protect_rmap(struct kvm_s390_mmu_cache *mc, struct gmap *sg, gfn_t p_gf union pte pte; int flags, rc; - KVM_BUG_ON(!is_shadow(sg), sg->kvm); + if (KVM_BUG_ON(!is_shadow(sg) || level <= TABLE_TYPE_PAGE_TABLE, sg->kvm)) + return -EINVAL; lockdep_assert_held(&sg->parent->children_lock); flags = DAT_WALK_SPLIT_ALLOC | (uses_skeys(sg->parent) ? DAT_WALK_USES_SKEYS : 0); diff --git a/arch/s390/kvm/gmap.h b/arch/s390/kvm/gmap.h index 96ee1395a592..6e51ec6066b4 100644 --- a/arch/s390/kvm/gmap.h +++ b/arch/s390/kvm/gmap.h @@ -167,6 +167,36 @@ static inline bool gmap_unmap_prefix(struct gmap *gmap, gfn_t gfn, gfn_t end) return _gmap_unmap_prefix(gmap, gfn, end, false); } +/** + * pte_needs_unshadow() -- Check if the pte operations triggers unshadowing. + * @oldpte: the previous value for the guest pte. + * @newpte: the new pte being set. + * @pgste: the pgste for the pte entry. + * + * If the pgste.vsie_notif bit is not set, return false: the page is not + * involved in vsie and thus should not trigger an unshadow operation. + * + * If the pgste.vsie_gmem bit is set, this pte represents shadowed guest + * memory. The access rights on g3's memory should be synchronized with g1's + * and g2's. Therefore unshadowing is triggered if the new and old pte + * differ in protection, or if the new pte is invalid. + * + * If the pgste.vsie_gmem bit is not set, this pte maps the g2 dat tables + * for g3. If the entry becomes writable or absent, it becomes impossible to + * guarantee that the shadow mapping will match g2's mapping. In that case, + * trigger an unshadow event. + * + * Return: true if an unshadow event should be triggered, otherwise false. + */ +static inline bool pte_needs_unshadow(union pte oldpte, union pte newpte, union pgste pgste) +{ + if (!pgste.vsie_notif) + return false; + if (pgste.vsie_gmem) + return (oldpte.h.p != newpte.h.p) || newpte.h.i; + return !newpte.h.p || !newpte.s.pr; +} + static inline union pgste _gmap_ptep_xchg(struct gmap *gmap, union pte *ptep, union pte newpte, union pgste pgste, gfn_t gfn, bool needs_lock) { @@ -180,8 +210,9 @@ static inline union pgste _gmap_ptep_xchg(struct gmap *gmap, union pte *ptep, un pgste.prefix_notif = 0; gmap_unmap_prefix(gmap, gfn, gfn + 1); } - if (pgste.vsie_notif && (ptep->h.p != newpte.h.p || newpte.h.i)) { + if (pte_needs_unshadow(*ptep, newpte, pgste)) { pgste.vsie_notif = 0; + pgste.vsie_gmem = 0; if (needs_lock) gmap_handle_vsie_unshadow_event(gmap, gfn); else @@ -198,6 +229,30 @@ static inline union pgste gmap_ptep_xchg(struct gmap *gmap, union pte *ptep, uni return _gmap_ptep_xchg(gmap, ptep, newpte, pgste, gfn, true); } +/** + * crste_needs_unshadow() -- Check if the crste operations triggers unshadowing. + * @oldcrste: the previous value for the crste. + * @newcrste: the new value for the crste. + * + * If the old crste did not have the vsie_notif bit set, return false: the + * page is not involved in vsie and thus should not trigger an unshadow + * operation. Conversely, if the bit is set, it can only be g3 memory, since + * dat tables are never mapped using large pages. + * + * Similar to the pgste.vsie_gmem case of pte_needs_unshadow(), if the + * protection bit is changing or the new page is invalid, trigger an + * unshadow event. Also trigger an unshadow event if the new crste does not + * have the vsie_notif bit set. + * + * Return: true if an unshadow event should be triggered, otherwise false. + */ +static inline bool crste_needs_unshadow(union crste oldcrste, union crste newcrste) +{ + if (!oldcrste.s.fc1.vsie_notif) + return false; + return (newcrste.h.p != oldcrste.h.p) || newcrste.h.i || !newcrste.s.fc1.vsie_notif; +} + static inline bool __must_check _gmap_crstep_xchg_atomic(struct gmap *gmap, union crste *crstep, union crste oldcrste, union crste newcrste, gfn_t gfn, bool needs_lock) @@ -216,8 +271,7 @@ static inline bool __must_check _gmap_crstep_xchg_atomic(struct gmap *gmap, unio newcrste.s.fc1.prefix_notif = 0; gmap_unmap_prefix(gmap, gfn, gfn + align); } - if (crste_leaf(oldcrste) && oldcrste.s.fc1.vsie_notif && - (newcrste.h.p || newcrste.h.i || !newcrste.s.fc1.vsie_notif)) { + if (crste_leaf(oldcrste) && crste_needs_unshadow(oldcrste, newcrste)) { newcrste.s.fc1.vsie_notif = 0; if (needs_lock) gmap_handle_vsie_unshadow_event(gmap, gfn); -- cgit v1.2.3 From a488e753de5853bec2e2e4d0c5a73f25d464bd2e Mon Sep 17 00:00:00 2001 From: Claudio Imbrenda Date: Tue, 19 May 2026 17:01:13 +0200 Subject: KVM: s390: vsie: Fix redundant rmap entries The address passed to the gmap rmap was not being masked. As a consequence several different (but functionally equivalent) rmap entries were being created for each shadowed table. Fix this by properly masking the address depending on the table level. Signed-off-by: Claudio Imbrenda Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reviewed-by: Christian Borntraeger Signed-off-by: Christian Borntraeger --- arch/s390/kvm/gmap.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/s390/kvm/gmap.c b/arch/s390/kvm/gmap.c index 8cff0cf5ce24..957126ab991c 100644 --- a/arch/s390/kvm/gmap.c +++ b/arch/s390/kvm/gmap.c @@ -1025,6 +1025,7 @@ int gmap_insert_rmap(struct gmap *sg, gfn_t p_gfn, gfn_t r_gfn, int level) int gmap_protect_rmap(struct kvm_s390_mmu_cache *mc, struct gmap *sg, gfn_t p_gfn, gfn_t r_gfn, kvm_pfn_t pfn, int level, bool wr) { + unsigned long bitmask; union crste *crstep; union pgste pgste; union pte *ptep; @@ -1041,8 +1042,9 @@ int gmap_protect_rmap(struct kvm_s390_mmu_cache *mc, struct gmap *sg, gfn_t p_gf if (rc) return rc; if (level <= TABLE_TYPE_REGION1) { + bitmask = -1UL << (8 + 11 * level); scoped_guard(spinlock, &sg->host_to_rmap_lock) - rc = gmap_insert_rmap(sg, p_gfn, r_gfn, level); + rc = gmap_insert_rmap(sg, p_gfn, r_gfn & bitmask, level); } if (rc) return rc; -- cgit v1.2.3 From 9029496abfae3c208336855ae6f3e1f5f881ef76 Mon Sep 17 00:00:00 2001 From: Claudio Imbrenda Date: Tue, 19 May 2026 17:01:14 +0200 Subject: KVM: s390: Properly reset zero bit in PGSTE In case of memory pressure, it's possible that a guest page gets freed and then almost immediately reused by the guest. If CMMA is enabled, _essa_clear_cbrl() will discard all pages that are either unused or zero. If a discarded page is reused before _essa_clear_cbrl() is called, and the pgste.zero bit is not cleared, the page will be discarded despite not being unused. When calling _gmap_ptep_xchg(), always clear the pgste.zero bit. This prevents the page from being accidentally discarded when not unused. Signed-off-by: Claudio Imbrenda Fixes: a2c17f9270cc ("KVM: s390: New gmap code") Reviewed-by: Steffen Eiden Signed-off-by: Christian Borntraeger --- arch/s390/kvm/gmap.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/s390/kvm/gmap.h b/arch/s390/kvm/gmap.h index 6e51ec6066b4..742e42a31744 100644 --- a/arch/s390/kvm/gmap.h +++ b/arch/s390/kvm/gmap.h @@ -220,6 +220,7 @@ static inline union pgste _gmap_ptep_xchg(struct gmap *gmap, union pte *ptep, un } if (!ptep->s.d && newpte.s.d && !newpte.s.s) SetPageDirty(pfn_to_page(newpte.h.pfra)); + pgste.zero = 0; return __dat_ptep_xchg(ptep, pgste, newpte, gfn, gmap->asce, uses_skeys(gmap)); } -- cgit v1.2.3 From c2ff4764e03e7a8d758352f4aceb8fe1be6ac971 Mon Sep 17 00:00:00 2001 From: Zeng Heng Date: Thu, 21 May 2026 15:30:11 +0800 Subject: arm64: tlb: Flush walk cache when unsharing PMD tables When huge_pmd_unshare() is called to unshare a PMD table, the tlb_unshare_pmd_ptdesc() function sets tlb->unshared_tables=true but the aarch64 tlb_flush() only checked tlb->freed_tables to determine whether to use TLBF_NONE (vae1is, invalidates walk cache) or TLBF_NOWALKCACHE (vale1is, leaf-only). This caused the stale PMD page table entry to remain in the walk cache after unshare, potentially leading to incorrect page table walks. Fix by including unshared_tables in the check, so that when unsharing tables, TLBF_NONE is used and the walk cache is properly invalidated. Here is the detailed distinction between vae1is and vale1is: | Instruction Combination | Actual Invalidation Scope | | ------------------------ | --------------------------------------------------| | `VAE1IS` + TTL=`0` | All entries at all levels (full invalidation) | | `VAE1IS` + TTL=`2` (L2) | Non-leaf at Level 0/1 + leaf at Level 2 | | `VALE1IS` + TTL=`0` | Leaf entries at all levels (non-leaf not cleared) | | `VALE1IS` + TTL=`2` (L2) | Leaf entry at Level 2 only | Signed-off-by: Zeng Heng Fixes: 8ce720d5bd91 ("mm/hugetlb: fix excessive IPI broadcasts when unsharing PMD tables using mmu_gather") Cc: Signed-off-by: Catalin Marinas --- arch/arm64/include/asm/tlb.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/tlb.h b/arch/arm64/include/asm/tlb.h index 10869d7731b8..751bd57bc3ba 100644 --- a/arch/arm64/include/asm/tlb.h +++ b/arch/arm64/include/asm/tlb.h @@ -53,7 +53,8 @@ static inline int tlb_get_level(struct mmu_gather *tlb) static inline void tlb_flush(struct mmu_gather *tlb) { struct vm_area_struct vma = TLB_FLUSH_VMA(tlb->mm, 0); - tlbf_t flags = tlb->freed_tables ? TLBF_NONE : TLBF_NOWALKCACHE; + tlbf_t flags = (tlb->freed_tables || tlb->unshared_tables) ? + TLBF_NONE : TLBF_NOWALKCACHE; unsigned long stride = tlb_get_unmap_size(tlb); int tlb_level = tlb_get_level(tlb); -- cgit v1.2.3 From 215c90ee656114f5e8c32408228d97082f8e0eef Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Wed, 6 May 2026 13:57:00 +0200 Subject: device property: set fwnode->secondary to NULL in fwnode_init() If a firmware node is allocated on the stack (for instance: temporary software node whose life-time we control) or on the heap - but using a non-zeroing allocation function - and initialized using fwnode_init(), its secondary pointer will contain uninitalized memory which likely will be neither NULL nor IS_ERR() and so may end up being dereferenced (for example: in dev_to_swnode()). Set fwnode->secondary to NULL on initialization. Cc: stable Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()") Signed-off-by: Bartosz Golaszewski Reviewed-by: Rafael J. Wysocki (Intel) Reviewed-by: Andy Shevchenko Reviewed-by: Sakari Ailus Link: https://patch.msgid.link/20260506115701.23035-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Greg Kroah-Hartman --- include/linux/fwnode.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h index 80b38fbf2121..31df7608737e 100644 --- a/include/linux/fwnode.h +++ b/include/linux/fwnode.h @@ -208,6 +208,7 @@ struct fwnode_operations { static inline void fwnode_init(struct fwnode_handle *fwnode, const struct fwnode_operations *ops) { + fwnode->secondary = NULL; fwnode->ops = ops; INIT_LIST_HEAD(&fwnode->consumers); INIT_LIST_HEAD(&fwnode->suppliers); -- cgit v1.2.3 From 654ddf855bebd8d45a6e707f5dc2344921f5e0cf Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 19 May 2026 22:28:01 +0200 Subject: platform/x86: bitland-mifs-wmi: add CONFIG_LEDS_CLASS dependency MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The newly added driver requires the LED classdev support and causes a link failure when that is disabled: x86_64-linux-ld: vmlinux.o: in function `bitland_mifs_wmi_probe': bitland-mifs-wmi.c:(.text+0xede02a): undefined reference to `devm_led_classdev_register_ext' Fixes: dc1ec4fa86b2 ("platform/x86: bitland-mifs-wmi: Add new Bitland MIFS WMI driver") Signed-off-by: Arnd Bergmann Link: https://patch.msgid.link/20260519202804.1339581-1-arnd@kernel.org Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 2ffa4ecf65b0..7a4956088300 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -118,6 +118,7 @@ config BITLAND_MIFS_WMI depends on ACPI_WMI depends on HWMON depends on INPUT + depends on LEDS_CLASS depends on POWER_SUPPLY select ACPI_PLATFORM_PROFILE select INPUT_SPARSEKMAP -- cgit v1.2.3 From f6982769910ecddabdb5b8b9afdab0bb8b6668ac Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Fri, 22 May 2026 20:56:22 +0900 Subject: block: avoid use-after-free in disk_free_zone_resources() The function disk_update_zone_resources() may call disk_free_zone_resources() in case of error, and following this, blk_revalidate_disk_zones() will again calls disk_free_zone_resources() if disk_update_zone_resources() failed. If a zone worker thread is being used (which is the default for a rotational media zoned device), disk_free_zone_resources() will try to stop the zone worker thread twice because disk->zone_wplugs_worker is not reset to NULL when the worker thread is stopped the first time. In disk_free_zone_resources(), fix this by correctly clearing disk->zone_wplugs_worker to NULL when the worker thread is stopped. And while at it, since disk_free_zone_resources() is always called after a failed call to disk_update_zone_resources(), remove the unnecessary call to disk_free_zone_resources() in disk_update_zone_resources(). Fixes: 1365b6904fd0 ("block: allow submitting all zone writes from a single context") Signed-off-by: Damien Le Moal Reviewed-by: Christoph Hellwig Link: https://patch.msgid.link/20260522115622.588535-1-dlemoal@kernel.org Signed-off-by: Jens Axboe --- block/blk-zoned.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/block/blk-zoned.c b/block/blk-zoned.c index 42ef830054dc..6a221c180889 100644 --- a/block/blk-zoned.c +++ b/block/blk-zoned.c @@ -2001,8 +2001,10 @@ static void disk_set_zones_cond_array(struct gendisk *disk, u8 *zones_cond) void disk_free_zone_resources(struct gendisk *disk) { - if (disk->zone_wplugs_worker) + if (disk->zone_wplugs_worker) { kthread_stop(disk->zone_wplugs_worker); + disk->zone_wplugs_worker = NULL; + } WARN_ON_ONCE(!list_empty(&disk->zone_wplugs_list)); if (disk->zone_wplugs_wq) { @@ -2135,9 +2137,6 @@ commit: ret = queue_limits_commit_update(q, &lim); unfreeze: - if (ret) - disk_free_zone_resources(disk); - blk_mq_unfreeze_queue(q, memflags); return ret; -- cgit v1.2.3 From 2d42c7cf1a2dad694db0c518b0e004502859f11c Mon Sep 17 00:00:00 2001 From: Hisam Mehboob Date: Thu, 9 Apr 2026 21:40:22 +0500 Subject: KVM: selftests: elf: Include instead of is a glibc-internal header that explicitly states it should never be included directly: #error "Never use directly; include instead." Replace it with the correct public header which works on all C libraries including musl. Building KVM selftests with musl-gcc fails with: lib/elf.c:10:10: fatal error: bits/endian.h: No such file or directory Fixes: 6089ae0bd5e1 ("kvm: selftests: add sync_regs_test") Signed-off-by: Hisam Mehboob Message-ID: <20260409164020.1575176-4-hisamshar@gmail.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/lib/elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/lib/elf.c b/tools/testing/selftests/kvm/lib/elf.c index b689c4df4a01..1924a9895834 100644 --- a/tools/testing/selftests/kvm/lib/elf.c +++ b/tools/testing/selftests/kvm/lib/elf.c @@ -7,7 +7,7 @@ #include "test_util.h" -#include +#include #include #include "kvm_util.h" -- cgit v1.2.3 From 86e2de10eb14446a49019791bd0674faa5fae088 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Fri, 22 May 2026 10:35:25 -0700 Subject: KVM: x86: Return the VM's configured APIC bus frequency when queried When KVM_CAP_X86_APIC_BUS_CYCLES_NS is queried on a specific VM, return the VM's configured APIC bus frequency, not KVM's default. Aside from the fact that returning the default frequency is blatantly wrong if userspace has changed the frequency, returning the configured frequency means userspace can blindly trust the result, e.g. when filling PV CPUID information that communicates the APIC bus frequency to the guest. Fixes: 6fef518594bc ("KVM: x86: Add a capability to configure bus frequency for APIC timer") Reported-by: David Woodhouse Closes: https://lore.kernel.org/all/ab84153e33fbe7c25667f595c56b310d4d5a93ef.camel@infradead.org Signed-off-by: Sean Christopherson Message-ID: <20260522173526.3539407-2-seanjc@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 0a1b63c63d1a..c1a72d749084 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -4876,7 +4876,7 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) r = tdp_enabled; break; case KVM_CAP_X86_APIC_BUS_CYCLES_NS: - r = APIC_BUS_CYCLE_NS_DEFAULT; + r = kvm ? kvm->arch.apic_bus_cycle_ns : APIC_BUS_CYCLE_NS_DEFAULT; break; case KVM_CAP_EXIT_HYPERCALL: r = KVM_EXIT_HYPERCALL_VALID_MASK; -- cgit v1.2.3 From d9c41dc531b0e8feb046ee3d31ce37657101b137 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Fri, 22 May 2026 10:35:26 -0700 Subject: KVM: selftests: Verify that KVM returns the configured APIC cycle length Add checks in the APIC bus clock test to verify that querying KVM_CAP_X86_APIC_BUS_CYCLES_NS on the VM after changing the frequency returns the VM's actual APIC cycle length, not KVM's default. For giggles, verify that KVM still returns its default frequency for the system-scoped check. Signed-off-by: Sean Christopherson Message-ID: <20260522173526.3539407-3-seanjc@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/x86/apic_bus_clock_test.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/testing/selftests/kvm/x86/apic_bus_clock_test.c b/tools/testing/selftests/kvm/x86/apic_bus_clock_test.c index 404f0028e110..0c84c27ea584 100644 --- a/tools/testing/selftests/kvm/x86/apic_bus_clock_test.c +++ b/tools/testing/selftests/kvm/x86/apic_bus_clock_test.c @@ -137,6 +137,10 @@ static void run_apic_bus_clock_test(u64 apic_hz, u64 delay_ms, vm_enable_cap(vm, KVM_CAP_X86_APIC_BUS_CYCLES_NS, NSEC_PER_SEC / apic_hz); + TEST_ASSERT_EQ(kvm_check_cap(KVM_CAP_X86_APIC_BUS_CYCLES_NS), 1); + TEST_ASSERT_EQ(vm_check_cap(vm, KVM_CAP_X86_APIC_BUS_CYCLES_NS), + NSEC_PER_SEC / apic_hz); + vcpu = vm_vcpu_add(vm, 0, apic_guest_code); vcpu_args_set(vcpu, 2, apic_hz, delay_ms); -- cgit v1.2.3 From 9a12fa5213cfc391e0eed63902d3be98f0913765 Mon Sep 17 00:00:00 2001 From: Tina Zhang Date: Fri, 22 May 2026 12:00:14 +0800 Subject: KVM: SVM: Disable AVIC IPI virtualization on Hygon Family 18h (erratum #1235) Hygon Family 18h CPUs are derived from AMD Family 17h (Zen1) silicon and share the same erratum #1235: hardware may read a stale IsRunning=1 bit during ICR write emulation and silently fail to generate an AVIC_IPI_FAILURE_TARGET_NOT_RUNNING VM-Exit on the sending vCPU. The absence of the VM-Exit causes KVM to miss the required wakeup of blocking target vCPUs, leading to hung vCPUs and unbounded delays in guest execution. Extend the existing AMD Family 17h erratum #1235 workaround to also cover Hygon Family 18h. With IPI virtualization disabled, KVM never sets IsRunning=1 in the Physical ID table, so every non-self IPI generates a VM-Exit and is correctly emulated. Fixes: 8de4a1c8164e ("KVM: SVM: Disable (x2)AVIC IPI virtualization if CPU has erratum #1235") Cc: Signed-off-by: Tina Zhang Message-ID: <20260522040014.3380201-1-zhang_wei@open-hieco.net> --- arch/x86/kvm/svm/avic.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c index adf211860949..993b551180fe 100644 --- a/arch/x86/kvm/svm/avic.c +++ b/arch/x86/kvm/svm/avic.c @@ -1300,12 +1300,14 @@ bool __init avic_hardware_setup(void) } /* - * Disable IPI virtualization for AMD Family 17h CPUs (Zen1 and Zen2) - * due to erratum 1235, which results in missed VM-Exits on the sender - * and thus missed wake events for blocking vCPUs due to the CPU - * failing to see a software update to clear IsRunning. + * Disable IPI virtualization for AMD Family 17h (Zen1 and Zen2) and + * Hygon Family 18h (derived from AMD Zen1) CPUs due to erratum 1235, + * which results in missed VM-Exits on the sender and thus missed wake + * events for blocking vCPUs due to the CPU failing to see a software + * update to clear IsRunning. */ - enable_ipiv = enable_ipiv && boot_cpu_data.x86 != 0x17; + if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) + enable_ipiv = false; amd_iommu_register_ga_log_notifier(&avic_ga_log_notifier); -- cgit v1.2.3 From 7dd62566e0d108d29034bcff8503b827f8763320 Mon Sep 17 00:00:00 2001 From: KP Singh Date: Fri, 22 May 2026 23:53:36 +0200 Subject: libbpf: fix off-by-one in emit_signature_match jump offset The offset for the cleanup-label jump is computed before the MOV R7 instruction is emitted, but the JMP lands after it. Account for the extra insn in the offset calculation (-2 instead of -1). Drop the redundant self-loop in the else branch; gen->error = -ERANGE already marks the generation as failed. Fixes: fb2b0e290147 ("libbpf: Update light skeleton for signing") Signed-off-by: KP Singh Link: https://lore.kernel.org/r/20260522215337.662271-2-kpsingh@kernel.org Signed-off-by: Alexei Starovoitov --- tools/lib/bpf/gen_loader.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/tools/lib/bpf/gen_loader.c b/tools/lib/bpf/gen_loader.c index cd5c2543f54d..9478b8f78f26 100644 --- a/tools/lib/bpf/gen_loader.c +++ b/tools/lib/bpf/gen_loader.c @@ -592,13 +592,12 @@ static void emit_signature_match(struct bpf_gen *gen) gen->hash_insn_offset[i] = gen->insn_cur - gen->insn_start; emit2(gen, BPF_LD_IMM64_RAW_FULL(BPF_REG_3, 0, 0, 0, 0, 0)); - off = -(gen->insn_cur - gen->insn_start - gen->cleanup_label) / 8 - 1; + off = -(gen->insn_cur - gen->insn_start - gen->cleanup_label) / 8 - 2; if (is_simm16(off)) { emit(gen, BPF_MOV64_IMM(BPF_REG_7, -EINVAL)); emit(gen, BPF_JMP_REG(BPF_JNE, BPF_REG_2, BPF_REG_3, off)); } else { gen->error = -ERANGE; - emit(gen, BPF_JMP_IMM(BPF_JA, 0, 0, -1)); } } } -- cgit v1.2.3 From 53676e4d44d6b38c8a0d9bff331f170ae2e41bbe Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Mon, 18 May 2026 15:17:14 -0700 Subject: drm/msm: Restore second parameter name in purge() and evict() After commit 3392291fc509 ("drm/msm: Fix shrinker deadlock"), all supported versions of clang warn (or error with CONFIG_WERROR=y): drivers/gpu/drm/msm/msm_gem_shrinker.c:105:58: error: omitting the parameter name in a function definition is a C23 extension [-Werror,-Wc23-extensions] 105 | purge(struct drm_gem_object *obj, struct ww_acquire_ctx *) | ^ drivers/gpu/drm/msm/msm_gem_shrinker.c:117:58: error: omitting the parameter name in a function definition is a C23 extension [-Werror,-Wc23-extensions] 117 | evict(struct drm_gem_object *obj, struct ww_acquire_ctx *) | ^ 2 errors generated. With older but supported versions of GCC, this is an unconditional hard error: drivers/gpu/drm/msm/msm_gem_shrinker.c: In function 'purge': drivers/gpu/drm/msm/msm_gem_shrinker.c:105:35: error: parameter name omitted purge(struct drm_gem_object *obj, struct ww_acquire_ctx *) ^~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/msm/msm_gem_shrinker.c: In function 'evict': drivers/gpu/drm/msm/msm_gem_shrinker.c:117:35: error: parameter name omitted evict(struct drm_gem_object *obj, struct ww_acquire_ctx *) ^~~~~~~~~~~~~~~~~~~~~~~ Restore the parameter name to clear up the warnings, renaming it "unused" to make it clear it is only needed to satisfy the prototype of drm_gem_lru_scan(). Cc: stable@vger.kernel.org Fixes: 3392291fc509 ("drm/msm: Fix shrinker deadlock") Signed-off-by: Nathan Chancellor Signed-off-by: Linus Torvalds --- drivers/gpu/drm/msm/msm_gem_shrinker.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_gem_shrinker.c b/drivers/gpu/drm/msm/msm_gem_shrinker.c index c8dda2b68cff..9d2788f79ace 100644 --- a/drivers/gpu/drm/msm/msm_gem_shrinker.c +++ b/drivers/gpu/drm/msm/msm_gem_shrinker.c @@ -102,7 +102,7 @@ out_unlock: } static bool -purge(struct drm_gem_object *obj, struct ww_acquire_ctx *) +purge(struct drm_gem_object *obj, struct ww_acquire_ctx *unused) { if (!is_purgeable(to_msm_bo(obj))) return false; @@ -114,7 +114,7 @@ purge(struct drm_gem_object *obj, struct ww_acquire_ctx *) } static bool -evict(struct drm_gem_object *obj, struct ww_acquire_ctx *) +evict(struct drm_gem_object *obj, struct ww_acquire_ctx *unused) { if (is_unevictable(to_msm_bo(obj))) return false; -- cgit v1.2.3 From e7ae89a0c97ce2b68b0983cd01eda67cf373517d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 24 May 2026 13:48:06 -0700 Subject: Linux 7.1-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9f59598d3a08..f056c921ea9c 100644 --- a/Makefile +++ b/Makefile @@ -2,7 +2,7 @@ VERSION = 7 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Baby Opossum Posse # *DOCUMENTATION* -- cgit v1.2.3 From afb2a3a9d8369d18122a0d7cd294eba9a98259c6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?C=C3=A1ssio=20Gabriel?= Date: Tue, 19 May 2026 13:51:47 -0300 Subject: ASoC: Intel: bytcht_es8316: Fix MCLK leak on init errors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit byt_cht_es8316_init() enables MCLK before configuring the codec sysclk and creating the headset jack. If either of those later steps fails, the function returns without disabling MCLK, leaving the clock enabled after card registration fails. Track whether this driver enabled MCLK and disable it on the init error paths. Add the matching DAI link exit callback so the same clock enable is also balanced when ASoC cleans up a successfully initialized link. Fixes: a03bdaa565cb ("ASoC: Intel: add machine driver for BYT/CHT + ES8316") Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260519-asoc-bytcht-es8316-mclk-leak-v1-1-b4a11cdc2afd@gmail.com Signed-off-by: Mark Brown --- sound/soc/intel/boards/bytcht_es8316.c | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/boards/bytcht_es8316.c b/sound/soc/intel/boards/bytcht_es8316.c index 192e2a394ff3..ea387dc74273 100644 --- a/sound/soc/intel/boards/bytcht_es8316.c +++ b/sound/soc/intel/boards/bytcht_es8316.c @@ -40,6 +40,7 @@ struct byt_cht_es8316_private { struct gpio_desc *speaker_en_gpio; struct device *codec_dev; bool speaker_en; + bool mclk_enabled; }; enum { @@ -170,6 +171,15 @@ static struct snd_soc_jack_pin byt_cht_es8316_jack_pins[] = { }, }; +static void byt_cht_es8316_disable_mclk(struct byt_cht_es8316_private *priv) +{ + if (!priv->mclk_enabled) + return; + + clk_disable_unprepare(priv->mclk); + priv->mclk_enabled = false; +} + static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime) { struct snd_soc_component *codec = snd_soc_rtd_to_codec(runtime, 0)->component; @@ -227,12 +237,14 @@ static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime) ret = clk_prepare_enable(priv->mclk); if (ret) dev_err(card->dev, "unable to enable MCLK\n"); + else + priv->mclk_enabled = true; ret = snd_soc_dai_set_sysclk(snd_soc_rtd_to_codec(runtime, 0), 0, 19200000, SND_SOC_CLOCK_IN); if (ret < 0) { dev_err(card->dev, "can't set codec clock %d\n", ret); - return ret; + goto err_disable_mclk; } ret = snd_soc_card_jack_new_pins(card, "Headset", @@ -241,13 +253,25 @@ static int byt_cht_es8316_init(struct snd_soc_pcm_runtime *runtime) ARRAY_SIZE(byt_cht_es8316_jack_pins)); if (ret) { dev_err(card->dev, "jack creation failed %d\n", ret); - return ret; + goto err_disable_mclk; } snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE); snd_soc_component_set_jack(codec, &priv->jack, NULL); return 0; + +err_disable_mclk: + byt_cht_es8316_disable_mclk(priv); + return ret; +} + +static void byt_cht_es8316_exit(struct snd_soc_pcm_runtime *runtime) +{ + struct snd_soc_card *card = runtime->card; + struct byt_cht_es8316_private *priv = snd_soc_card_get_drvdata(card); + + byt_cht_es8316_disable_mclk(priv); } static int byt_cht_es8316_codec_fixup(struct snd_soc_pcm_runtime *rtd, @@ -353,6 +377,7 @@ static struct snd_soc_dai_link byt_cht_es8316_dais[] = { | SND_SOC_DAIFMT_CBC_CFC, .be_hw_params_fixup = byt_cht_es8316_codec_fixup, .init = byt_cht_es8316_init, + .exit = byt_cht_es8316_exit, SND_SOC_DAILINK_REG(ssp2_port, ssp2_codec, platform), }, }; -- cgit v1.2.3 From cee3e63e7106c3c81b2053371fdf14240bfba2fc Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 18 May 2026 09:23:43 +0000 Subject: ASoC: qcom: q6asm-dai: do not set stream state in event and trigger callbacks The q6asm-dai stream state is used by prepare() to decide whether an existing stream setup needs to be closed before opening/configuring a new one. Updating the state from trigger or asynchronous DSP callbacks can make that state stale or incorrect relative to the actual setup lifetime. In particular, setting Q6ASM_STREAM_STOPPED on STOP or EOS completion can make prepare() believe there is no active setup to close, which can result in opening/configuring the same stream more than once. Keep stream state updates tied to prepare(), where the stream is actually closed and reopened, and stop changing it from trigger and EOS callbacks. Fixes: bfbb12dfa144 ("ASoC: qcom: q6asm-dai: perform correct state check before closing") Cc: Stable@vger.kernel.org Closes: https://lore.kernel.org/all/afS7rTHdc9TyIeLx@rdacayan/ Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-2-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm-dai.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 4f8f7db6c3d3..56f0d8913904 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -186,7 +186,6 @@ static void event_handler(uint32_t opcode, uint32_t token, case ASM_CLIENT_EVENT_CMD_RUN_DONE: break; case ASM_CLIENT_EVENT_CMD_EOS_DONE: - prtd->state = Q6ASM_STREAM_STOPPED; break; case ASM_CLIENT_EVENT_DATA_WRITE_DONE: { snd_pcm_period_elapsed(substream); @@ -341,7 +340,6 @@ static int q6asm_dai_trigger(struct snd_soc_component *component, 0, 0, 0); break; case SNDRV_PCM_TRIGGER_STOP: - prtd->state = Q6ASM_STREAM_STOPPED; ret = q6asm_cmd_nowait(prtd->audio_client, prtd->stream_id, CMD_EOS); break; @@ -555,8 +553,6 @@ static void compress_event_handler(uint32_t opcode, uint32_t token, snd_compr_drain_notify(prtd->cstream); prtd->notify_on_drain = false; - } else { - prtd->state = Q6ASM_STREAM_STOPPED; } break; @@ -1014,7 +1010,6 @@ static int q6asm_dai_compr_trigger(struct snd_soc_component *component, 0, 0, 0); break; case SNDRV_PCM_TRIGGER_STOP: - prtd->state = Q6ASM_STREAM_STOPPED; ret = q6asm_cmd_nowait(prtd->audio_client, prtd->stream_id, CMD_EOS); break; -- cgit v1.2.3 From 048c540ee76ded666bda74f9dae1ca3254e0633c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 18 May 2026 09:23:44 +0000 Subject: ASoC: qcom: q6asm-dai: close stream only when running q6asm_dai_close() and q6asm_dai_compr_free() currently issue CMD_CLOSE whenever prtd->state is non-zero. After prepare() closes an existing stream, the state is updated to Q6ASM_STREAM_STOPPED. Since this state is also non-zero, the close and free paths can send CMD_CLOSE again for a stream that has already been closed. Restrict CMD_CLOSE to the Q6ASM_STREAM_RUNNING state so the command is sent only when the ASM stream is still active. Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Cc: Stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-3-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm-dai.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 56f0d8913904..ef86b5b9a951 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -455,12 +455,12 @@ static int q6asm_dai_close(struct snd_soc_component *component, struct q6asm_dai_rtd *prtd = runtime->private_data; if (prtd->audio_client) { - if (prtd->state) + if (prtd->state == Q6ASM_STREAM_RUNNING) { q6asm_cmd(prtd->audio_client, prtd->stream_id, CMD_CLOSE); - - q6asm_unmap_memory_regions(substream->stream, + q6asm_unmap_memory_regions(substream->stream, prtd->audio_client); + } q6asm_audio_client_free(prtd->audio_client); prtd->audio_client = NULL; } @@ -670,7 +670,7 @@ static int q6asm_dai_compr_free(struct snd_soc_component *component, struct snd_soc_pcm_runtime *rtd = stream->private_data; if (prtd->audio_client) { - if (prtd->state) { + if (prtd->state == Q6ASM_STREAM_RUNNING) { q6asm_cmd(prtd->audio_client, prtd->stream_id, CMD_CLOSE); if (prtd->next_track_stream_id) { @@ -678,11 +678,11 @@ static int q6asm_dai_compr_free(struct snd_soc_component *component, prtd->next_track_stream_id, CMD_CLOSE); } - } - snd_dma_free_pages(&prtd->dma_buffer); - q6asm_unmap_memory_regions(stream->direction, + q6asm_unmap_memory_regions(stream->direction, prtd->audio_client); + } + snd_dma_free_pages(&prtd->dma_buffer); q6asm_audio_client_free(prtd->audio_client); prtd->audio_client = NULL; } -- cgit v1.2.3 From 4b4db09f283df65d780bc7cee66cb4a7e9bf4770 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 18 May 2026 09:23:45 +0000 Subject: ASoC: qcom: q6asm-dai: fix error handling in prepare and set_params Fix error handling in q6asm_dai_compr_set_params() and q6asm_dai_prepare() for both CMD_CLOSE and q6asm_unmap_memory_regions(). In both the functions, we are doing q6asm_audio_client_free in failure cases, which means if prepare or set_params fail, we can never recover. Now open and close are done in respective dai_open/close functions. Fixes: 2a9e92d371db ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Cc: Stable@vger.kernel.org Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-4-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm-dai.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index ef86b5b9a951..fd691004a657 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -226,9 +226,19 @@ static int q6asm_dai_prepare(struct snd_soc_component *component, /* rate and channels are sent to audio driver */ if (prtd->state == Q6ASM_STREAM_RUNNING) { /* clear the previous setup if any */ - q6asm_cmd(prtd->audio_client, prtd->stream_id, CMD_CLOSE); - q6asm_unmap_memory_regions(substream->stream, - prtd->audio_client); + ret = q6asm_cmd(prtd->audio_client, prtd->stream_id, CMD_CLOSE); + if (ret < 0) { + dev_err(dev, "Failed to close q6asm stream %d\n", prtd->stream_id); + return ret; + } + + ret = q6asm_unmap_memory_regions(substream->stream, prtd->audio_client); + if (ret < 0) { + dev_err(dev, "Failed to unmap memory regions for q6asm stream %d\n", + prtd->stream_id); + return ret; + } + q6routing_stream_close(soc_prtd->dai_link->id, substream->stream); prtd->state = Q6ASM_STREAM_STOPPED; @@ -296,8 +306,6 @@ routing_err: q6asm_cmd(prtd->audio_client, prtd->stream_id, CMD_CLOSE); open_err: q6asm_unmap_memory_regions(substream->stream, prtd->audio_client); - q6asm_audio_client_free(prtd->audio_client); - prtd->audio_client = NULL; return ret; } @@ -912,7 +920,7 @@ static int q6asm_dai_compr_set_params(struct snd_soc_component *component, prtd->session_id, dir); if (ret) { dev_err(dev, "Stream reg failed ret:%d\n", ret); - goto q6_err; + goto routing_err; } ret = __q6asm_dai_compr_set_codec_params(component, stream, @@ -938,11 +946,11 @@ static int q6asm_dai_compr_set_params(struct snd_soc_component *component, return 0; q6_err: + q6routing_stream_close(rtd->dai_link->id, dir); +routing_err: q6asm_cmd(prtd->audio_client, prtd->stream_id, CMD_CLOSE); open_err: - q6asm_audio_client_free(prtd->audio_client); - prtd->audio_client = NULL; return ret; } -- cgit v1.2.3 From c92d880cde739a3fb6346f42fc5feb2f093c063c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 18 May 2026 09:23:46 +0000 Subject: ASoC: qcom: q6asm-dai: remove unnecessary braces The ASM_CLIENT_EVENT_DATA_WRITE_DONE case does not declare any local variables or require a separate scope, so drop the unnecessary braces. Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-5-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm-dai.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index fd691004a657..5774c2611197 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -187,10 +187,9 @@ static void event_handler(uint32_t opcode, uint32_t token, break; case ASM_CLIENT_EVENT_CMD_EOS_DONE: break; - case ASM_CLIENT_EVENT_DATA_WRITE_DONE: { + case ASM_CLIENT_EVENT_DATA_WRITE_DONE: snd_pcm_period_elapsed(substream); break; - } case ASM_CLIENT_EVENT_DATA_READ_DONE: snd_pcm_period_elapsed(substream); if (prtd->state == Q6ASM_STREAM_RUNNING) -- cgit v1.2.3 From 909595c288af2304d0902488698e91c8aeee36a3 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 18 May 2026 09:23:47 +0000 Subject: ASoC: qcom: q6asm-dai: use pointer type with kzalloc_obj() Use kzalloc_obj(*prtd) instead of explicitly naming the structure type. Signed-off-by: Srinivas Kandagatla Link: https://patch.msgid.link/20260518092347.3446946-6-srinivas.kandagatla@oss.qualcomm.com Signed-off-by: Mark Brown --- sound/soc/qcom/qdsp6/q6asm-dai.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c index 5774c2611197..4f09fdd40905 100644 --- a/sound/soc/qcom/qdsp6/q6asm-dai.c +++ b/sound/soc/qcom/qdsp6/q6asm-dai.c @@ -383,7 +383,7 @@ static int q6asm_dai_open(struct snd_soc_component *component, return -EINVAL; } - prtd = kzalloc_obj(struct q6asm_dai_rtd); + prtd = kzalloc_obj(*prtd); if (prtd == NULL) return -ENOMEM; -- cgit v1.2.3 From f63ad68e18d774a5d15cd7e405ead63f6b322679 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?C=C3=A1ssio=20Gabriel?= Date: Wed, 27 May 2026 09:24:00 -0300 Subject: ASoC: codecs: simple-mux: Fix enum control bounds check MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit simple_mux_control_put() rejects values greater than e->items, but enum control values are zero based. For the two-entry mux used by this driver, valid values are 0 and 1, so value 2 must be rejected as well. Accepting e->items can store an invalid mux state, pass it to the GPIO setter, and pass it on to the DAPM mux update path where it is used as an index into the enum text array. Use the same >= e->items check used by the ASoC enum helpers. Fixes: 342fbb7578d1 ("ASoC: add simple-mux") Signed-off-by: Cássio Gabriel Link: https://patch.msgid.link/20260527-asoc-simple-mux-enum-bounds-v1-1-3f805b9fc671@gmail.com Signed-off-by: Mark Brown --- sound/soc/codecs/simple-mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/simple-mux.c b/sound/soc/codecs/simple-mux.c index 069555f35f73..c2f906a3f074 100644 --- a/sound/soc/codecs/simple-mux.c +++ b/sound/soc/codecs/simple-mux.c @@ -51,7 +51,7 @@ static int simple_mux_control_put(struct snd_kcontrol *kcontrol, struct snd_soc_component *c = snd_soc_dapm_to_component(dapm); struct simple_mux *priv = snd_soc_component_get_drvdata(c); - if (ucontrol->value.enumerated.item[0] > e->items) + if (ucontrol->value.enumerated.item[0] >= e->items) return -EINVAL; if (priv->mux == ucontrol->value.enumerated.item[0]) -- cgit v1.2.3