From 3401299a1b9e747cbf7de2cc0c8f6376c3cbe565 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 20 May 2011 00:04:35 -0700 Subject: de6*/dl2k/sundance: Move the D-Link drivers Move the D-Link drivers into drivers/net/ethernet/dlink/ and make the necessary Kconfig and Makefile changes. CC: Bjorn Ekwall CC: Donald Becker CC: Edward Peng Signed-off-by: Jeff Kirsher --- drivers/net/Kconfig | 64 -- drivers/net/Makefile | 4 - drivers/net/de600.c | 530 --------- drivers/net/de600.h | 168 --- drivers/net/de620.c | 988 ----------------- drivers/net/de620.h | 117 -- drivers/net/dl2k.c | 1824 ------------------------------- drivers/net/dl2k.h | 554 ---------- drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/dlink/Kconfig | 84 ++ drivers/net/ethernet/dlink/Makefile | 8 + drivers/net/ethernet/dlink/de600.c | 530 +++++++++ drivers/net/ethernet/dlink/de600.h | 168 +++ drivers/net/ethernet/dlink/de620.c | 988 +++++++++++++++++ drivers/net/ethernet/dlink/de620.h | 117 ++ drivers/net/ethernet/dlink/dl2k.c | 1824 +++++++++++++++++++++++++++++++ drivers/net/ethernet/dlink/dl2k.h | 554 ++++++++++ drivers/net/ethernet/dlink/sundance.c | 1940 +++++++++++++++++++++++++++++++++ drivers/net/sundance.c | 1940 --------------------------------- 20 files changed, 6215 insertions(+), 6189 deletions(-) delete mode 100644 drivers/net/de600.c delete mode 100644 drivers/net/de600.h delete mode 100644 drivers/net/de620.c delete mode 100644 drivers/net/de620.h delete mode 100644 drivers/net/dl2k.c delete mode 100644 drivers/net/dl2k.h create mode 100644 drivers/net/ethernet/dlink/Kconfig create mode 100644 drivers/net/ethernet/dlink/Makefile create mode 100644 drivers/net/ethernet/dlink/de600.c create mode 100644 drivers/net/ethernet/dlink/de600.h create mode 100644 drivers/net/ethernet/dlink/de620.c create mode 100644 drivers/net/ethernet/dlink/de620.h create mode 100644 drivers/net/ethernet/dlink/dl2k.c create mode 100644 drivers/net/ethernet/dlink/dl2k.h create mode 100644 drivers/net/ethernet/dlink/sundance.c delete mode 100644 drivers/net/sundance.c diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 42408d7dc1c2..8799caf64c98 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -623,26 +623,6 @@ config SIS900 To compile this driver as a module, choose M here: the module will be called sis900. This is recommended. -config SUNDANCE - tristate "Sundance Alta support" - depends on NET_PCI && PCI - select CRC32 - select MII - help - This driver is for the Sundance "Alta" chip. - More specific information and updates are available from - . - -config SUNDANCE_MMIO - bool "Use MMIO instead of PIO" - depends on SUNDANCE - help - Enable memory-mapped I/O for interaction with Sundance NIC registers. - Do NOT enable this by default, PIO (enabled when MMIO is disabled) - is known to solve bugs on certain chips. - - If unsure, say N. - config TLAN tristate "TI ThunderLAN support" depends on NET_PCI && (PCI || EISA) @@ -740,36 +720,6 @@ config NET_POCKET the questions about this class of network devices. If you say Y, you will be asked for your specific device in the following questions. -config DE600 - tristate "D-Link DE600 pocket adapter support" - depends on NET_POCKET && PARPORT - ---help--- - This is a network (Ethernet) device which attaches to your parallel - port. Read as well as the - Ethernet-HOWTO, available from - , if you want to use - this. It is possible to have several devices share a single parallel - port and it is safe to compile the corresponding drivers into the - kernel. - - To compile this driver as a module, choose M here: the module - will be called de600. - -config DE620 - tristate "D-Link DE620 pocket adapter support" - depends on NET_POCKET && PARPORT - ---help--- - This is a network (Ethernet) device which attaches to your parallel - port. Read as well as the - Ethernet-HOWTO, available from - , if you want to use - this. It is possible to have several devices share a single parallel - port and it is safe to compile the corresponding drivers into the - kernel. - - To compile this driver as a module, choose M here: the module - will be called de620. - config SGISEEQ tristate "SGI Seeq ethernet controller support" depends on SGI_HAS_SEEQ @@ -862,20 +812,6 @@ menuconfig NETDEV_1000 if NETDEV_1000 -config DL2K - tristate "DL2000/TC902x-based Gigabit Ethernet support" - depends on PCI - select CRC32 - help - This driver supports DL2000/TC902x-based Gigabit ethernet cards, - which includes - D-Link DGE-550T Gigabit Ethernet Adapter. - D-Link DL2000-based Gigabit Ethernet Adapter. - Sundance/Tamarack TC902x Gigabit Ethernet Adapter. - - To compile this driver as a module, choose M here: the - module will be called dl2k. - config IP1000 tristate "IP1000 Gigabit Ethernet support" depends on PCI && EXPERIMENTAL diff --git a/drivers/net/Makefile b/drivers/net/Makefile index d142fc5ef68c..ecd8c9f664d2 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -67,7 +67,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o # end link order section # -obj-$(CONFIG_SUNDANCE) += sundance.o obj-$(CONFIG_HAMACHI) += hamachi.o obj-$(CONFIG_NET) += Space.o loopback.o obj-$(CONFIG_SEEQ8005) += seeq8005.o @@ -106,8 +105,6 @@ obj-$(CONFIG_DUMMY) += dummy.o obj-$(CONFIG_IFB) += ifb.o obj-$(CONFIG_MACVLAN) += macvlan.o obj-$(CONFIG_MACVTAP) += macvtap.o -obj-$(CONFIG_DE600) += de600.o -obj-$(CONFIG_DE620) += de620.o obj-$(CONFIG_DEFXX) += defxx.o obj-$(CONFIG_SGISEEQ) += sgiseeq.o obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o @@ -123,7 +120,6 @@ obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o obj-$(CONFIG_TUN) += tun.o obj-$(CONFIG_VETH) += veth.o obj-$(CONFIG_NET_NETX) += netx-eth.o -obj-$(CONFIG_DL2K) += dl2k.o obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o obj-$(CONFIG_BFIN_MAC) += bfin_mac.o obj-$(CONFIG_DM9000) += dm9000.o diff --git a/drivers/net/de600.c b/drivers/net/de600.c deleted file mode 100644 index 23a65398d011..000000000000 --- a/drivers/net/de600.c +++ /dev/null @@ -1,530 +0,0 @@ -static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj0rn@blox.se)\n"; -/* - * de600.c - * - * Linux driver for the D-Link DE-600 Ethernet pocket adapter. - * - * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall - * The Author may be reached as bj0rn@blox.se - * - * Based on adapter information gathered from DE600.ASM by D-Link Inc., - * as included on disk C in the v.2.11 of PC/TCP from FTP Software. - * For DE600.asm: - * Portions (C) Copyright 1990 D-Link, Inc. - * Copyright, 1988-1992, Russell Nelson, Crynwr Software - * - * Adapted to the sample network driver core for linux, - * written by: Donald Becker - * (Now at ) - * - **************************************************************/ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - **************************************************************/ - -/* Add more time here if your adapter won't work OK: */ -#define DE600_SLOW_DOWN udelay(delay_time) - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "de600.h" - -static unsigned int check_lost = 1; -module_param(check_lost, bool, 0); -MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600"); - -static unsigned int delay_time = 10; -module_param(delay_time, int, 0); -MODULE_PARM_DESC(delay_time, "DE-600 deley on I/O in microseconds"); - - -/* - * D-Link driver variables: - */ - -static volatile int rx_page; - -#define TX_PAGES 2 -static volatile int tx_fifo[TX_PAGES]; -static volatile int tx_fifo_in; -static volatile int tx_fifo_out; -static volatile int free_tx_pages = TX_PAGES; -static int was_down; -static DEFINE_SPINLOCK(de600_lock); - -static inline u8 de600_read_status(struct net_device *dev) -{ - u8 status; - - outb_p(STATUS, DATA_PORT); - status = inb(STATUS_PORT); - outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT); - - return status; -} - -static inline u8 de600_read_byte(unsigned char type, struct net_device *dev) -{ - /* dev used by macros */ - u8 lo; - outb_p((type), DATA_PORT); - lo = ((unsigned char)inb(STATUS_PORT)) >> 4; - outb_p((type) | HI_NIBBLE, DATA_PORT); - return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo; -} - -/* - * Open/initialize the board. This is called (in the current kernel) - * after booting when 'ifconfig name> $IP_ADDR' is run (in rc.inet1). - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is a non-reboot way to recover if something goes wrong. - */ - -static int de600_open(struct net_device *dev) -{ - unsigned long flags; - int ret = request_irq(DE600_IRQ, de600_interrupt, 0, dev->name, dev); - if (ret) { - printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, DE600_IRQ); - return ret; - } - spin_lock_irqsave(&de600_lock, flags); - ret = adapter_init(dev); - spin_unlock_irqrestore(&de600_lock, flags); - return ret; -} - -/* - * The inverse routine to de600_open(). - */ - -static int de600_close(struct net_device *dev) -{ - select_nic(); - rx_page = 0; - de600_put_command(RESET); - de600_put_command(STOP_RESET); - de600_put_command(0); - select_prn(); - free_irq(DE600_IRQ, dev); - return 0; -} - -static inline void trigger_interrupt(struct net_device *dev) -{ - de600_put_command(FLIP_IRQ); - select_prn(); - DE600_SLOW_DOWN; - select_nic(); - de600_put_command(0); -} - -/* - * Copy a buffer to the adapter transmit page memory. - * Start sending. - */ - -static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - int transmit_from; - int len; - int tickssofar; - u8 *buffer = skb->data; - int i; - - if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */ - tickssofar = jiffies - dev_trans_start(dev); - if (tickssofar < HZ/20) - return NETDEV_TX_BUSY; - /* else */ - printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem"); - /* Restart the adapter. */ - spin_lock_irqsave(&de600_lock, flags); - if (adapter_init(dev)) { - spin_unlock_irqrestore(&de600_lock, flags); - return NETDEV_TX_BUSY; - } - spin_unlock_irqrestore(&de600_lock, flags); - } - - /* Start real output */ - pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages); - - if ((len = skb->len) < RUNT) - len = RUNT; - - spin_lock_irqsave(&de600_lock, flags); - select_nic(); - tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len; - tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */ - - if(check_lost) - { - /* This costs about 40 instructions per packet... */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - de600_read_byte(READ_DATA, dev); - if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) { - if (adapter_init(dev)) { - spin_unlock_irqrestore(&de600_lock, flags); - return NETDEV_TX_BUSY; - } - } - } - - de600_setup_address(transmit_from, RW_ADDR); - for (i = 0; i < skb->len ; ++i, ++buffer) - de600_put_byte(*buffer); - for (; i < len; ++i) - de600_put_byte(0); - - if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */ - dev->trans_start = jiffies; - netif_start_queue(dev); /* allow more packets into adapter */ - /* Send page and generate a faked interrupt */ - de600_setup_address(transmit_from, TX_ADDR); - de600_put_command(TX_ENABLE); - } - else { - if (free_tx_pages) - netif_start_queue(dev); - else - netif_stop_queue(dev); - select_prn(); - } - spin_unlock_irqrestore(&de600_lock, flags); - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -/* - * The typical workload of the driver: - * Handle the network interface interrupts. - */ - -static irqreturn_t de600_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - u8 irq_status; - int retrig = 0; - int boguscount = 0; - - spin_lock(&de600_lock); - - select_nic(); - irq_status = de600_read_status(dev); - - do { - pr_debug("de600_interrupt (%02X)\n", irq_status); - - if (irq_status & RX_GOOD) - de600_rx_intr(dev); - else if (!(irq_status & RX_BUSY)) - de600_put_command(RX_ENABLE); - - /* Any transmission in progress? */ - if (free_tx_pages < TX_PAGES) - retrig = de600_tx_intr(dev, irq_status); - else - retrig = 0; - - irq_status = de600_read_status(dev); - } while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) ); - /* - * Yeah, it _looks_ like busy waiting, smells like busy waiting - * and I know it's not PC, but please, it will only occur once - * in a while and then only for a loop or so (< 1ms for sure!) - */ - - /* Enable adapter interrupts */ - select_prn(); - if (retrig) - trigger_interrupt(dev); - spin_unlock(&de600_lock); - return IRQ_HANDLED; -} - -static int de600_tx_intr(struct net_device *dev, int irq_status) -{ - /* - * Returns 1 if tx still not done - */ - - /* Check if current transmission is done yet */ - if (irq_status & TX_BUSY) - return 1; /* tx not done, try again */ - - /* else */ - /* If last transmission OK then bump fifo index */ - if (!(irq_status & TX_FAILED16)) { - tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES; - ++free_tx_pages; - dev->stats.tx_packets++; - netif_wake_queue(dev); - } - - /* More to send, or resend last packet? */ - if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) { - dev->trans_start = jiffies; - de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR); - de600_put_command(TX_ENABLE); - return 1; - } - /* else */ - - return 0; -} - -/* - * We have a good packet, get it out of the adapter. - */ -static void de600_rx_intr(struct net_device *dev) -{ - struct sk_buff *skb; - int i; - int read_from; - int size; - unsigned char *buffer; - - /* Get size of received packet */ - size = de600_read_byte(RX_LEN, dev); /* low byte */ - size += (de600_read_byte(RX_LEN, dev) << 8); /* high byte */ - size -= 4; /* Ignore trailing 4 CRC-bytes */ - - /* Tell adapter where to store next incoming packet, enable receiver */ - read_from = rx_page_adr(); - next_rx_page(); - de600_put_command(RX_ENABLE); - - if ((size < 32) || (size > 1535)) { - printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size); - if (size > 10000) - adapter_init(dev); - return; - } - - skb = dev_alloc_skb(size+2); - if (skb == NULL) { - printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size); - return; - } - /* else */ - - skb_reserve(skb,2); /* Align */ - - /* 'skb->data' points to the start of sk_buff data area. */ - buffer = skb_put(skb,size); - - /* copy the packet into the buffer */ - de600_setup_address(read_from, RW_ADDR); - for (i = size; i > 0; --i, ++buffer) - *buffer = de600_read_byte(READ_DATA, dev); - - skb->protocol=eth_type_trans(skb,dev); - - netif_rx(skb); - - /* update stats */ - dev->stats.rx_packets++; /* count all receives */ - dev->stats.rx_bytes += size; /* count all received bytes */ - - /* - * If any worth-while packets have been received, netif_rx() - * will work on them when we get to the tasklets. - */ -} - -static const struct net_device_ops de600_netdev_ops = { - .ndo_open = de600_open, - .ndo_stop = de600_close, - .ndo_start_xmit = de600_start_xmit, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - - -static struct net_device * __init de600_probe(void) -{ - int i; - struct net_device *dev; - int err; - - dev = alloc_etherdev(0); - if (!dev) - return ERR_PTR(-ENOMEM); - - - if (!request_region(DE600_IO, 3, "de600")) { - printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO); - err = -EBUSY; - goto out; - } - - printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name); - /* Alpha testers must have the version number to report bugs. */ - pr_debug("%s", version); - - /* probe for adapter */ - err = -ENODEV; - rx_page = 0; - select_nic(); - (void)de600_read_status(dev); - de600_put_command(RESET); - de600_put_command(STOP_RESET); - if (de600_read_status(dev) & 0xf0) { - printk(": not at I/O %#3x.\n", DATA_PORT); - goto out1; - } - - /* - * Maybe we found one, - * have to check if it is a D-Link DE-600 adapter... - */ - - /* Get the adapter ethernet address from the ROM */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - for (i = 0; i < ETH_ALEN; i++) { - dev->dev_addr[i] = de600_read_byte(READ_DATA, dev); - dev->broadcast[i] = 0xff; - } - - /* Check magic code */ - if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) { - /* OK, install real address */ - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x80; - dev->dev_addr[2] = 0xc8; - dev->dev_addr[3] &= 0x0f; - dev->dev_addr[3] |= 0x70; - } else { - printk(" not identified in the printer port\n"); - goto out1; - } - - printk(", Ethernet Address: %pM\n", dev->dev_addr); - - dev->netdev_ops = &de600_netdev_ops; - - dev->flags&=~IFF_MULTICAST; - - select_prn(); - - err = register_netdev(dev); - if (err) - goto out1; - - return dev; - -out1: - release_region(DE600_IO, 3); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static int adapter_init(struct net_device *dev) -{ - int i; - - select_nic(); - rx_page = 0; /* used by RESET */ - de600_put_command(RESET); - de600_put_command(STOP_RESET); - - /* Check if it is still there... */ - /* Get the some bytes of the adapter ethernet address from the ROM */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - de600_read_byte(READ_DATA, dev); - if ((de600_read_byte(READ_DATA, dev) != 0xde) || - (de600_read_byte(READ_DATA, dev) != 0x15)) { - /* was: if (de600_read_status(dev) & 0xf0) { */ - printk("Something has happened to the DE-600! Please check it and do a new ifconfig!\n"); - /* Goodbye, cruel world... */ - dev->flags &= ~IFF_UP; - de600_close(dev); - was_down = 1; - netif_stop_queue(dev); /* Transmit busy... */ - return 1; /* failed */ - } - - if (was_down) { - printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name); - was_down = 0; - } - - tx_fifo_in = 0; - tx_fifo_out = 0; - free_tx_pages = TX_PAGES; - - - /* set the ether address. */ - de600_setup_address(NODE_ADDRESS, RW_ADDR); - for (i = 0; i < ETH_ALEN; i++) - de600_put_byte(dev->dev_addr[i]); - - /* where to start saving incoming packets */ - rx_page = RX_BP | RX_BASE_PAGE; - de600_setup_address(MEM_4K, RW_ADDR); - /* Enable receiver */ - de600_put_command(RX_ENABLE); - select_prn(); - - netif_start_queue(dev); - - return 0; /* OK */ -} - -static struct net_device *de600_dev; - -static int __init de600_init(void) -{ - de600_dev = de600_probe(); - if (IS_ERR(de600_dev)) - return PTR_ERR(de600_dev); - return 0; -} - -static void __exit de600_exit(void) -{ - unregister_netdev(de600_dev); - release_region(DE600_IO, 3); - free_netdev(de600_dev); -} - -module_init(de600_init); -module_exit(de600_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/de600.h b/drivers/net/de600.h deleted file mode 100644 index e80ecbabcf4e..000000000000 --- a/drivers/net/de600.h +++ /dev/null @@ -1,168 +0,0 @@ -/************************************************** - * * - * Definition of D-Link Ethernet Pocket adapter * - * * - **************************************************/ -/* - * D-Link Ethernet pocket adapter ports - */ -/* - * OK, so I'm cheating, but there are an awful lot of - * reads and writes in order to get anything in and out - * of the DE-600 with 4 bits at a time in the parallel port, - * so every saved instruction really helps :-) - */ - -#ifndef DE600_IO -#define DE600_IO 0x378 -#endif - -#define DATA_PORT (DE600_IO) -#define STATUS_PORT (DE600_IO + 1) -#define COMMAND_PORT (DE600_IO + 2) - -#ifndef DE600_IRQ -#define DE600_IRQ 7 -#endif -/* - * It really should look like this, and autoprobing as well... - * -#define DATA_PORT (dev->base_addr + 0) -#define STATUS_PORT (dev->base_addr + 1) -#define COMMAND_PORT (dev->base_addr + 2) -#define DE600_IRQ dev->irq - */ - -/* - * D-Link COMMAND_PORT commands - */ -#define SELECT_NIC 0x04 /* select Network Interface Card */ -#define SELECT_PRN 0x1c /* select Printer */ -#define NML_PRN 0xec /* normal Printer situation */ -#define IRQEN 0x10 /* enable IRQ line */ - -/* - * D-Link STATUS_PORT - */ -#define RX_BUSY 0x80 -#define RX_GOOD 0x40 -#define TX_FAILED16 0x10 -#define TX_BUSY 0x08 - -/* - * D-Link DATA_PORT commands - * command in low 4 bits - * data in high 4 bits - * select current data nibble with HI_NIBBLE bit - */ -#define WRITE_DATA 0x00 /* write memory */ -#define READ_DATA 0x01 /* read memory */ -#define STATUS 0x02 /* read status register */ -#define COMMAND 0x03 /* write command register (see COMMAND below) */ -#define NULL_COMMAND 0x04 /* null command */ -#define RX_LEN 0x05 /* read received packet length */ -#define TX_ADDR 0x06 /* set adapter transmit memory address */ -#define RW_ADDR 0x07 /* set adapter read/write memory address */ -#define HI_NIBBLE 0x08 /* read/write the high nibble of data, - or-ed with rest of command */ - -/* - * command register, accessed through DATA_PORT with low bits = COMMAND - */ -#define RX_ALL 0x01 /* PROMISCUOUS */ -#define RX_BP 0x02 /* default: BROADCAST & PHYSICAL ADDRESS */ -#define RX_MBP 0x03 /* MULTICAST, BROADCAST & PHYSICAL ADDRESS */ - -#define TX_ENABLE 0x04 /* bit 2 */ -#define RX_ENABLE 0x08 /* bit 3 */ - -#define RESET 0x80 /* set bit 7 high */ -#define STOP_RESET 0x00 /* set bit 7 low */ - -/* - * data to command register - * (high 4 bits in write to DATA_PORT) - */ -#define RX_PAGE2_SELECT 0x10 /* bit 4, only 2 pages to select */ -#define RX_BASE_PAGE 0x20 /* bit 5, always set when specifying RX_ADDR */ -#define FLIP_IRQ 0x40 /* bit 6 */ - -/* - * D-Link adapter internal memory: - * - * 0-2K 1:st transmit page (send from pointer up to 2K) - * 2-4K 2:nd transmit page (send from pointer up to 4K) - * - * 4-6K 1:st receive page (data from 4K upwards) - * 6-8K 2:nd receive page (data from 6K upwards) - * - * 8K+ Adapter ROM (contains magic code and last 3 bytes of Ethernet address) - */ -#define MEM_2K 0x0800 /* 2048 */ -#define MEM_4K 0x1000 /* 4096 */ -#define MEM_6K 0x1800 /* 6144 */ -#define NODE_ADDRESS 0x2000 /* 8192 */ - -#define RUNT 60 /* Too small Ethernet packet */ - -/************************************************** - * * - * End of definition * - * * - **************************************************/ - -/* - * Index to functions, as function prototypes. - */ -/* Routines used internally. (See "convenience macros") */ -static u8 de600_read_status(struct net_device *dev); -static u8 de600_read_byte(unsigned char type, struct net_device *dev); - -/* Put in the device structure. */ -static int de600_open(struct net_device *dev); -static int de600_close(struct net_device *dev); -static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev); - -/* Dispatch from interrupts. */ -static irqreturn_t de600_interrupt(int irq, void *dev_id); -static int de600_tx_intr(struct net_device *dev, int irq_status); -static void de600_rx_intr(struct net_device *dev); - -/* Initialization */ -static void trigger_interrupt(struct net_device *dev); -static int adapter_init(struct net_device *dev); - -/* - * Convenience macros/functions for D-Link adapter - */ - -#define select_prn() outb_p(SELECT_PRN, COMMAND_PORT); DE600_SLOW_DOWN -#define select_nic() outb_p(SELECT_NIC, COMMAND_PORT); DE600_SLOW_DOWN - -/* Thanks for hints from Mark Burton */ -#define de600_put_byte(data) ( \ - outb_p(((data) << 4) | WRITE_DATA , DATA_PORT), \ - outb_p(((data) & 0xf0) | WRITE_DATA | HI_NIBBLE, DATA_PORT)) - -/* - * The first two outb_p()'s below could perhaps be deleted if there - * would be more delay in the last two. Not certain about it yet... - */ -#define de600_put_command(cmd) ( \ - outb_p(( rx_page << 4) | COMMAND , DATA_PORT), \ - outb_p(( rx_page & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT), \ - outb_p(((rx_page | cmd) << 4) | COMMAND , DATA_PORT), \ - outb_p(((rx_page | cmd) & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT)) - -#define de600_setup_address(addr,type) ( \ - outb_p((((addr) << 4) & 0xf0) | type , DATA_PORT), \ - outb_p(( (addr) & 0xf0) | type | HI_NIBBLE, DATA_PORT), \ - outb_p((((addr) >> 4) & 0xf0) | type , DATA_PORT), \ - outb_p((((addr) >> 8) & 0xf0) | type | HI_NIBBLE, DATA_PORT)) - -#define rx_page_adr() ((rx_page & RX_PAGE2_SELECT)?(MEM_6K):(MEM_4K)) - -/* Flip bit, only 2 pages */ -#define next_rx_page() (rx_page ^= RX_PAGE2_SELECT) - -#define tx_page_adr(a) (((a) + 1) * MEM_2K) diff --git a/drivers/net/de620.c b/drivers/net/de620.c deleted file mode 100644 index 1c51a7576119..000000000000 --- a/drivers/net/de620.c +++ /dev/null @@ -1,988 +0,0 @@ -/* - * de620.c $Revision: 1.40 $ BETA - * - * - * Linux driver for the D-Link DE-620 Ethernet pocket adapter. - * - * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall - * - * Based on adapter information gathered from DOS packetdriver - * sources from D-Link Inc: (Special thanks to Henry Ngai of D-Link.) - * Portions (C) Copyright D-Link SYSTEM Inc. 1991, 1992 - * Copyright, 1988, Russell Nelson, Crynwr Software - * - * Adapted to the sample network driver core for linux, - * written by: Donald Becker - * (Now at ) - * - * Valuable assistance from: - * J. Joshua Kopper - * Olav Kvittem - * Germano Caronni - * Jeremy Fitzhardinge - * - *****************************************************************************/ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - *****************************************************************************/ -static const char version[] = - "de620.c: $Revision: 1.40 $, Bjorn Ekwall \n"; - -/*********************************************************************** - * - * "Tuning" section. - * - * Compile-time options: (see below for descriptions) - * -DDE620_IO=0x378 (lpt1) - * -DDE620_IRQ=7 (lpt1) - * -DSHUTDOWN_WHEN_LOST - * -DCOUNT_LOOPS - * -DLOWSPEED - * -DREAD_DELAY - * -DWRITE_DELAY - */ - -/* - * This driver assumes that the printer port is a "normal", - * dumb, uni-directional port! - * If your port is "fancy" in any way, please try to set it to "normal" - * with your BIOS setup. I have no access to machines with bi-directional - * ports, so I can't test such a driver :-( - * (Yes, I _know_ it is possible to use DE620 with bidirectional ports...) - * - * There are some clones of DE620 out there, with different names. - * If the current driver does not recognize a clone, try to change - * the following #define to: - * - * #define DE620_CLONE 1 - */ -#define DE620_CLONE 0 - -/* - * If the adapter has problems with high speeds, enable this #define - * otherwise full printerport speed will be attempted. - * - * You can tune the READ_DELAY/WRITE_DELAY below if you enable LOWSPEED - * -#define LOWSPEED - */ - -#ifndef READ_DELAY -#define READ_DELAY 100 /* adapter internal read delay in 100ns units */ -#endif - -#ifndef WRITE_DELAY -#define WRITE_DELAY 100 /* adapter internal write delay in 100ns units */ -#endif - -/* - * Enable this #define if you want the adapter to do a "ifconfig down" on - * itself when we have detected that something is possibly wrong with it. - * The default behaviour is to retry with "adapter_init()" until success. - * This should be used for debugging purposes only. - * -#define SHUTDOWN_WHEN_LOST - */ - -#ifdef LOWSPEED -/* - * Enable this #define if you want to see debugging output that show how long - * we have to wait before the DE-620 is ready for the next read/write/command. - * -#define COUNT_LOOPS - */ -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -/* Constant definitions for the DE-620 registers, commands and bits */ -#include "de620.h" - -typedef unsigned char byte; - -/******************************************************* - * * - * Definition of D-Link DE-620 Ethernet Pocket adapter * - * See also "de620.h" * - * * - *******************************************************/ -#ifndef DE620_IO /* Compile-time configurable */ -#define DE620_IO 0x378 -#endif - -#ifndef DE620_IRQ /* Compile-time configurable */ -#define DE620_IRQ 7 -#endif - -#define DATA_PORT (dev->base_addr) -#define STATUS_PORT (dev->base_addr + 1) -#define COMMAND_PORT (dev->base_addr + 2) - -#define RUNT 60 /* Too small Ethernet packet */ -#define GIANT 1514 /* largest legal size packet, no fcs */ - -/* - * Force media with insmod: - * insmod de620.o bnc=1 - * or - * insmod de620.o utp=1 - * - * Force io and/or irq with insmod: - * insmod de620.o io=0x378 irq=7 - * - * Make a clone skip the Ethernet-address range check: - * insmod de620.o clone=1 - */ -static int bnc; -static int utp; -static int io = DE620_IO; -static int irq = DE620_IRQ; -static int clone = DE620_CLONE; - -static spinlock_t de620_lock; - -module_param(bnc, int, 0); -module_param(utp, int, 0); -module_param(io, int, 0); -module_param(irq, int, 0); -module_param(clone, int, 0); -MODULE_PARM_DESC(bnc, "DE-620 set BNC medium (0-1)"); -MODULE_PARM_DESC(utp, "DE-620 set UTP medium (0-1)"); -MODULE_PARM_DESC(io, "DE-620 I/O base address,required"); -MODULE_PARM_DESC(irq, "DE-620 IRQ number,required"); -MODULE_PARM_DESC(clone, "Check also for non-D-Link DE-620 clones (0-1)"); - -/*********************************************** - * * - * Index to functions, as function prototypes. * - * * - ***********************************************/ - -/* - * Routines used internally. (See also "convenience macros.. below") - */ - -/* Put in the device structure. */ -static int de620_open(struct net_device *); -static int de620_close(struct net_device *); -static void de620_set_multicast_list(struct net_device *); -static int de620_start_xmit(struct sk_buff *, struct net_device *); - -/* Dispatch from interrupts. */ -static irqreturn_t de620_interrupt(int, void *); -static int de620_rx_intr(struct net_device *); - -/* Initialization */ -static int adapter_init(struct net_device *); -static int read_eeprom(struct net_device *); - - -/* - * D-Link driver variables: - */ -#define SCR_DEF NIBBLEMODE |INTON | SLEEP | AUTOTX -#define TCR_DEF RXPB /* not used: | TXSUCINT | T16INT */ -#define DE620_RX_START_PAGE 12 /* 12 pages (=3k) reserved for tx */ -#define DEF_NIC_CMD IRQEN | ICEN | DS1 - -static volatile byte NIC_Cmd; -static volatile byte next_rx_page; -static byte first_rx_page; -static byte last_rx_page; -static byte EIPRegister; - -static struct nic { - byte NodeID[6]; - byte RAM_Size; - byte Model; - byte Media; - byte SCR; -} nic_data; - -/********************************************************** - * * - * Convenience macros/functions for D-Link DE-620 adapter * - * * - **********************************************************/ -#define de620_tx_buffs(dd) (inb(STATUS_PORT) & (TXBF0 | TXBF1)) -#define de620_flip_ds(dd) NIC_Cmd ^= DS0 | DS1; outb(NIC_Cmd, COMMAND_PORT); - -/* Check for ready-status, and return a nibble (high 4 bits) for data input */ -#ifdef COUNT_LOOPS -static int tot_cnt; -#endif -static inline byte -de620_ready(struct net_device *dev) -{ - byte value; - register short int cnt = 0; - - while ((((value = inb(STATUS_PORT)) & READY) == 0) && (cnt <= 1000)) - ++cnt; - -#ifdef COUNT_LOOPS - tot_cnt += cnt; -#endif - return value & 0xf0; /* nibble */ -} - -static inline void -de620_send_command(struct net_device *dev, byte cmd) -{ - de620_ready(dev); - if (cmd == W_DUMMY) - outb(NIC_Cmd, COMMAND_PORT); - - outb(cmd, DATA_PORT); - - outb(NIC_Cmd ^ CS0, COMMAND_PORT); - de620_ready(dev); - outb(NIC_Cmd, COMMAND_PORT); -} - -static inline void -de620_put_byte(struct net_device *dev, byte value) -{ - /* The de620_ready() makes 7 loops, on the average, on a DX2/66 */ - de620_ready(dev); - outb(value, DATA_PORT); - de620_flip_ds(dev); -} - -static inline byte -de620_read_byte(struct net_device *dev) -{ - byte value; - - /* The de620_ready() makes 7 loops, on the average, on a DX2/66 */ - value = de620_ready(dev); /* High nibble */ - de620_flip_ds(dev); - value |= de620_ready(dev) >> 4; /* Low nibble */ - return value; -} - -static inline void -de620_write_block(struct net_device *dev, byte *buffer, int count, int pad) -{ -#ifndef LOWSPEED - byte uflip = NIC_Cmd ^ (DS0 | DS1); - byte dflip = NIC_Cmd; -#else /* LOWSPEED */ -#ifdef COUNT_LOOPS - int bytes = count; -#endif /* COUNT_LOOPS */ -#endif /* LOWSPEED */ - -#ifdef LOWSPEED -#ifdef COUNT_LOOPS - tot_cnt = 0; -#endif /* COUNT_LOOPS */ - /* No further optimization useful, the limit is in the adapter. */ - for ( ; count > 0; --count, ++buffer) { - de620_put_byte(dev,*buffer); - } - for ( count = pad ; count > 0; --count, ++buffer) { - de620_put_byte(dev, 0); - } - de620_send_command(dev,W_DUMMY); -#ifdef COUNT_LOOPS - /* trial debug output: loops per byte in de620_ready() */ - printk("WRITE(%d)\n", tot_cnt/((bytes?bytes:1))); -#endif /* COUNT_LOOPS */ -#else /* not LOWSPEED */ - for ( ; count > 0; count -=2) { - outb(*buffer++, DATA_PORT); - outb(uflip, COMMAND_PORT); - outb(*buffer++, DATA_PORT); - outb(dflip, COMMAND_PORT); - } - de620_send_command(dev,W_DUMMY); -#endif /* LOWSPEED */ -} - -static inline void -de620_read_block(struct net_device *dev, byte *data, int count) -{ -#ifndef LOWSPEED - byte value; - byte uflip = NIC_Cmd ^ (DS0 | DS1); - byte dflip = NIC_Cmd; -#else /* LOWSPEED */ -#ifdef COUNT_LOOPS - int bytes = count; - - tot_cnt = 0; -#endif /* COUNT_LOOPS */ -#endif /* LOWSPEED */ - -#ifdef LOWSPEED - /* No further optimization useful, the limit is in the adapter. */ - while (count-- > 0) { - *data++ = de620_read_byte(dev); - de620_flip_ds(dev); - } -#ifdef COUNT_LOOPS - /* trial debug output: loops per byte in de620_ready() */ - printk("READ(%d)\n", tot_cnt/(2*(bytes?bytes:1))); -#endif /* COUNT_LOOPS */ -#else /* not LOWSPEED */ - while (count-- > 0) { - value = inb(STATUS_PORT) & 0xf0; /* High nibble */ - outb(uflip, COMMAND_PORT); - *data++ = value | inb(STATUS_PORT) >> 4; /* Low nibble */ - outb(dflip , COMMAND_PORT); - } -#endif /* LOWSPEED */ -} - -static inline void -de620_set_delay(struct net_device *dev) -{ - de620_ready(dev); - outb(W_DFR, DATA_PORT); - outb(NIC_Cmd ^ CS0, COMMAND_PORT); - - de620_ready(dev); -#ifdef LOWSPEED - outb(WRITE_DELAY, DATA_PORT); -#else - outb(0, DATA_PORT); -#endif - de620_flip_ds(dev); - - de620_ready(dev); -#ifdef LOWSPEED - outb(READ_DELAY, DATA_PORT); -#else - outb(0, DATA_PORT); -#endif - de620_flip_ds(dev); -} - -static inline void -de620_set_register(struct net_device *dev, byte reg, byte value) -{ - de620_ready(dev); - outb(reg, DATA_PORT); - outb(NIC_Cmd ^ CS0, COMMAND_PORT); - - de620_put_byte(dev, value); -} - -static inline byte -de620_get_register(struct net_device *dev, byte reg) -{ - byte value; - - de620_send_command(dev,reg); - value = de620_read_byte(dev); - de620_send_command(dev,W_DUMMY); - - return value; -} - -/********************************************************************* - * - * Open/initialize the board. - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is a non-reboot way to recover if something goes wrong. - * - */ -static int de620_open(struct net_device *dev) -{ - int ret = request_irq(dev->irq, de620_interrupt, 0, dev->name, dev); - if (ret) { - printk (KERN_ERR "%s: unable to get IRQ %d\n", dev->name, dev->irq); - return ret; - } - - if (adapter_init(dev)) { - ret = -EIO; - goto out_free_irq; - } - - netif_start_queue(dev); - return 0; - -out_free_irq: - free_irq(dev->irq, dev); - return ret; -} - -/************************************************ - * - * The inverse routine to de620_open(). - * - */ - -static int de620_close(struct net_device *dev) -{ - netif_stop_queue(dev); - /* disable recv */ - de620_set_register(dev, W_TCR, RXOFF); - free_irq(dev->irq, dev); - return 0; -} - -/********************************************* - * - * Set or clear the multicast filter for this adaptor. - * (no real multicast implemented for the DE-620, but she can be promiscuous...) - * - */ - -static void de620_set_multicast_list(struct net_device *dev) -{ - if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) - { /* Enable promiscuous mode */ - de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL); - } - else - { /* Disable promiscuous mode, use normal mode */ - de620_set_register(dev, W_TCR, TCR_DEF); - } -} - -/******************************************************* - * - * Handle timeouts on transmit - */ - -static void de620_timeout(struct net_device *dev) -{ - printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, "network cable problem"); - /* Restart the adapter. */ - if (!adapter_init(dev)) /* maybe close it */ - netif_wake_queue(dev); -} - -/******************************************************* - * - * Copy a buffer to the adapter transmit page memory. - * Start sending. - */ -static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - int len; - byte *buffer = skb->data; - byte using_txbuf; - - using_txbuf = de620_tx_buffs(dev); /* Peek at the adapter */ - - netif_stop_queue(dev); - - - if ((len = skb->len) < RUNT) - len = RUNT; - if (len & 1) /* send an even number of bytes */ - ++len; - - /* Start real output */ - - spin_lock_irqsave(&de620_lock, flags); - pr_debug("de620_start_xmit: len=%d, bufs 0x%02x\n", - (int)skb->len, using_txbuf); - - /* select a free tx buffer. if there is one... */ - switch (using_txbuf) { - default: /* both are free: use TXBF0 */ - case TXBF1: /* use TXBF0 */ - de620_send_command(dev,W_CR | RW0); - using_txbuf |= TXBF0; - break; - - case TXBF0: /* use TXBF1 */ - de620_send_command(dev,W_CR | RW1); - using_txbuf |= TXBF1; - break; - - case (TXBF0 | TXBF1): /* NONE!!! */ - printk(KERN_WARNING "%s: No tx-buffer available!\n", dev->name); - spin_unlock_irqrestore(&de620_lock, flags); - return NETDEV_TX_BUSY; - } - de620_write_block(dev, buffer, skb->len, len-skb->len); - - if(!(using_txbuf == (TXBF0 | TXBF1))) - netif_wake_queue(dev); - - dev->stats.tx_packets++; - spin_unlock_irqrestore(&de620_lock, flags); - dev_kfree_skb (skb); - return NETDEV_TX_OK; -} - -/***************************************************** - * - * Handle the network interface interrupts. - * - */ -static irqreturn_t -de620_interrupt(int irq_in, void *dev_id) -{ - struct net_device *dev = dev_id; - byte irq_status; - int bogus_count = 0; - int again = 0; - - spin_lock(&de620_lock); - - /* Read the status register (_not_ the status port) */ - irq_status = de620_get_register(dev, R_STS); - - pr_debug("de620_interrupt (%2.2X)\n", irq_status); - - if (irq_status & RXGOOD) { - do { - again = de620_rx_intr(dev); - pr_debug("again=%d\n", again); - } - while (again && (++bogus_count < 100)); - } - - if(de620_tx_buffs(dev) != (TXBF0 | TXBF1)) - netif_wake_queue(dev); - - spin_unlock(&de620_lock); - return IRQ_HANDLED; -} - -/************************************** - * - * Get a packet from the adapter - * - * Send it "upstairs" - * - */ -static int de620_rx_intr(struct net_device *dev) -{ - struct header_buf { - byte status; - byte Rx_NextPage; - unsigned short Rx_ByteCount; - } header_buf; - struct sk_buff *skb; - int size; - byte *buffer; - byte pagelink; - byte curr_page; - - pr_debug("de620_rx_intr: next_rx_page = %d\n", next_rx_page); - - /* Tell the adapter that we are going to read data, and from where */ - de620_send_command(dev, W_CR | RRN); - de620_set_register(dev, W_RSA1, next_rx_page); - de620_set_register(dev, W_RSA0, 0); - - /* Deep breath, and away we goooooo */ - de620_read_block(dev, (byte *)&header_buf, sizeof(struct header_buf)); - pr_debug("page status=0x%02x, nextpage=%d, packetsize=%d\n", - header_buf.status, header_buf.Rx_NextPage, - header_buf.Rx_ByteCount); - - /* Plausible page header? */ - pagelink = header_buf.Rx_NextPage; - if ((pagelink < first_rx_page) || (last_rx_page < pagelink)) { - /* Ouch... Forget it! Skip all and start afresh... */ - printk(KERN_WARNING "%s: Ring overrun? Restoring...\n", dev->name); - /* You win some, you lose some. And sometimes plenty... */ - adapter_init(dev); - netif_wake_queue(dev); - dev->stats.rx_over_errors++; - return 0; - } - - /* OK, this look good, so far. Let's see if it's consistent... */ - /* Let's compute the start of the next packet, based on where we are */ - pagelink = next_rx_page + - ((header_buf.Rx_ByteCount + (4 - 1 + 0x100)) >> 8); - - /* Are we going to wrap around the page counter? */ - if (pagelink > last_rx_page) - pagelink -= (last_rx_page - first_rx_page + 1); - - /* Is the _computed_ next page number equal to what the adapter says? */ - if (pagelink != header_buf.Rx_NextPage) { - /* Naah, we'll skip this packet. Probably bogus data as well */ - printk(KERN_WARNING "%s: Page link out of sync! Restoring...\n", dev->name); - next_rx_page = header_buf.Rx_NextPage; /* at least a try... */ - de620_send_command(dev, W_DUMMY); - de620_set_register(dev, W_NPRF, next_rx_page); - dev->stats.rx_over_errors++; - return 0; - } - next_rx_page = pagelink; - - size = header_buf.Rx_ByteCount - 4; - if ((size < RUNT) || (GIANT < size)) { - printk(KERN_WARNING "%s: Illegal packet size: %d!\n", dev->name, size); - } - else { /* Good packet? */ - skb = dev_alloc_skb(size+2); - if (skb == NULL) { /* Yeah, but no place to put it... */ - printk(KERN_WARNING "%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size); - dev->stats.rx_dropped++; - } - else { /* Yep! Go get it! */ - skb_reserve(skb,2); /* Align */ - /* skb->data points to the start of sk_buff data area */ - buffer = skb_put(skb,size); - /* copy the packet into the buffer */ - de620_read_block(dev, buffer, size); - pr_debug("Read %d bytes\n", size); - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); /* deliver it "upstairs" */ - /* count all receives */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += size; - } - } - - /* Let's peek ahead to see if we have read the last current packet */ - /* NOTE! We're _not_ checking the 'EMPTY'-flag! This seems better... */ - curr_page = de620_get_register(dev, R_CPR); - de620_set_register(dev, W_NPRF, next_rx_page); - pr_debug("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page); - - return next_rx_page != curr_page; /* That was slightly tricky... */ -} - -/********************************************* - * - * Reset the adapter to a known state - * - */ -static int adapter_init(struct net_device *dev) -{ - int i; - static int was_down; - - if ((nic_data.Model == 3) || (nic_data.Model == 0)) { /* CT */ - EIPRegister = NCTL0; - if (nic_data.Media != 1) - EIPRegister |= NIS0; /* not BNC */ - } - else if (nic_data.Model == 2) { /* UTP */ - EIPRegister = NCTL0 | NIS0; - } - - if (utp) - EIPRegister = NCTL0 | NIS0; - if (bnc) - EIPRegister = NCTL0; - - de620_send_command(dev, W_CR | RNOP | CLEAR); - de620_send_command(dev, W_CR | RNOP); - - de620_set_register(dev, W_SCR, SCR_DEF); - /* disable recv to wait init */ - de620_set_register(dev, W_TCR, RXOFF); - - /* Set the node ID in the adapter */ - for (i = 0; i < 6; ++i) { /* W_PARn = 0xaa + n */ - de620_set_register(dev, W_PAR0 + i, dev->dev_addr[i]); - } - - de620_set_register(dev, W_EIP, EIPRegister); - - next_rx_page = first_rx_page = DE620_RX_START_PAGE; - if (nic_data.RAM_Size) - last_rx_page = nic_data.RAM_Size - 1; - else /* 64k RAM */ - last_rx_page = 255; - - de620_set_register(dev, W_SPR, first_rx_page); /* Start Page Register*/ - de620_set_register(dev, W_EPR, last_rx_page); /* End Page Register */ - de620_set_register(dev, W_CPR, first_rx_page);/*Current Page Register*/ - de620_send_command(dev, W_NPR | first_rx_page); /* Next Page Register*/ - de620_send_command(dev, W_DUMMY); - de620_set_delay(dev); - - /* Final sanity check: Anybody out there? */ - /* Let's hope some bits from the statusregister make a good check */ -#define CHECK_MASK ( 0 | TXSUC | T16 | 0 | RXCRC | RXSHORT | 0 | 0 ) -#define CHECK_OK ( 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 ) - /* success: X 0 0 X 0 0 X X */ - /* ignore: EEDI RXGOOD COLS LNKS*/ - - if (((i = de620_get_register(dev, R_STS)) & CHECK_MASK) != CHECK_OK) { - printk(KERN_ERR "%s: Something has happened to the DE-620! Please check it" -#ifdef SHUTDOWN_WHEN_LOST - " and do a new ifconfig" -#endif - "! (%02x)\n", dev->name, i); -#ifdef SHUTDOWN_WHEN_LOST - /* Goodbye, cruel world... */ - dev->flags &= ~IFF_UP; - de620_close(dev); -#endif - was_down = 1; - return 1; /* failed */ - } - if (was_down) { - printk(KERN_WARNING "%s: Thanks, I feel much better now!\n", dev->name); - was_down = 0; - } - - /* All OK, go ahead... */ - de620_set_register(dev, W_TCR, TCR_DEF); - - return 0; /* all ok */ -} - -static const struct net_device_ops de620_netdev_ops = { - .ndo_open = de620_open, - .ndo_stop = de620_close, - .ndo_start_xmit = de620_start_xmit, - .ndo_tx_timeout = de620_timeout, - .ndo_set_multicast_list = de620_set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/****************************************************************************** - * - * Only start-up code below - * - */ -/**************************************** - * - * Check if there is a DE-620 connected - */ -struct net_device * __init de620_probe(int unit) -{ - byte checkbyte = 0xa5; - struct net_device *dev; - int err = -ENOMEM; - int i; - - dev = alloc_etherdev(0); - if (!dev) - goto out; - - spin_lock_init(&de620_lock); - - /* - * This is where the base_addr and irq gets set. - * Tunable at compile-time and insmod-time - */ - dev->base_addr = io; - dev->irq = irq; - - /* allow overriding parameters on command line */ - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - } - - pr_debug("%s", version); - - printk(KERN_INFO "D-Link DE-620 pocket adapter"); - - if (!request_region(dev->base_addr, 3, "de620")) { - printk(" io 0x%3lX, which is busy.\n", dev->base_addr); - err = -EBUSY; - goto out1; - } - - /* Initially, configure basic nibble mode, so we can read the EEPROM */ - NIC_Cmd = DEF_NIC_CMD; - de620_set_register(dev, W_EIP, EIPRegister); - - /* Anybody out there? */ - de620_set_register(dev, W_CPR, checkbyte); - checkbyte = de620_get_register(dev, R_CPR); - - if ((checkbyte != 0xa5) || (read_eeprom(dev) != 0)) { - printk(" not identified in the printer port\n"); - err = -ENODEV; - goto out2; - } - - /* else, got it! */ - dev->dev_addr[0] = nic_data.NodeID[0]; - for (i = 1; i < ETH_ALEN; i++) { - dev->dev_addr[i] = nic_data.NodeID[i]; - dev->broadcast[i] = 0xff; - } - - printk(", Ethernet Address: %pM", dev->dev_addr); - - printk(" (%dk RAM,", - (nic_data.RAM_Size) ? (nic_data.RAM_Size >> 2) : 64); - - if (nic_data.Media == 1) - printk(" BNC)\n"); - else - printk(" UTP)\n"); - - dev->netdev_ops = &de620_netdev_ops; - dev->watchdog_timeo = HZ*2; - - /* base_addr and irq are already set, see above! */ - - /* dump eeprom */ - pr_debug("\nEEPROM contents:\n" - "RAM_Size = 0x%02X\n" - "NodeID = %pM\n" - "Model = %d\n" - "Media = %d\n" - "SCR = 0x%02x\n", nic_data.RAM_Size, nic_data.NodeID, - nic_data.Model, nic_data.Media, nic_data.SCR); - - err = register_netdev(dev); - if (err) - goto out2; - return dev; - -out2: - release_region(dev->base_addr, 3); -out1: - free_netdev(dev); -out: - return ERR_PTR(err); -} - -/********************************** - * - * Read info from on-board EEPROM - * - * Note: Bitwise serial I/O to/from the EEPROM vi the status _register_! - */ -#define sendit(dev,data) de620_set_register(dev, W_EIP, data | EIPRegister); - -static unsigned short __init ReadAWord(struct net_device *dev, int from) -{ - unsigned short data; - int nbits; - - /* cs [__~~] SET SEND STATE */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 0); sendit(dev, 1); sendit(dev, 5); sendit(dev, 4); - - /* Send the 9-bit address from where we want to read the 16-bit word */ - for (nbits = 9; nbits > 0; --nbits, from <<= 1) { - if (from & 0x0100) { /* bit set? */ - /* cs [~~~~] SEND 1 */ - /* di [~~~~] */ - /* sck [_~~_] */ - sendit(dev, 6); sendit(dev, 7); sendit(dev, 7); sendit(dev, 6); - } - else { - /* cs [~~~~] SEND 0 */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4); - } - } - - /* Shift in the 16-bit word. The bits appear serially in EEDI (=0x80) */ - for (data = 0, nbits = 16; nbits > 0; --nbits) { - /* cs [~~~~] SEND 0 */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4); - data = (data << 1) | ((de620_get_register(dev, R_STS) & EEDI) >> 7); - } - /* cs [____] RESET SEND STATE */ - /* di [____] */ - /* sck [_~~_] */ - sendit(dev, 0); sendit(dev, 1); sendit(dev, 1); sendit(dev, 0); - - return data; -} - -static int __init read_eeprom(struct net_device *dev) -{ - unsigned short wrd; - - /* D-Link Ethernet addresses are in the series 00:80:c8:7X:XX:XX:XX */ - wrd = ReadAWord(dev, 0x1aa); /* bytes 0 + 1 of NodeID */ - if (!clone && (wrd != htons(0x0080))) /* Valid D-Link ether sequence? */ - return -1; /* Nope, not a DE-620 */ - nic_data.NodeID[0] = wrd & 0xff; - nic_data.NodeID[1] = wrd >> 8; - - wrd = ReadAWord(dev, 0x1ab); /* bytes 2 + 3 of NodeID */ - if (!clone && ((wrd & 0xff) != 0xc8)) /* Valid D-Link ether sequence? */ - return -1; /* Nope, not a DE-620 */ - nic_data.NodeID[2] = wrd & 0xff; - nic_data.NodeID[3] = wrd >> 8; - - wrd = ReadAWord(dev, 0x1ac); /* bytes 4 + 5 of NodeID */ - nic_data.NodeID[4] = wrd & 0xff; - nic_data.NodeID[5] = wrd >> 8; - - wrd = ReadAWord(dev, 0x1ad); /* RAM size in pages (256 bytes). 0 = 64k */ - nic_data.RAM_Size = (wrd >> 8); - - wrd = ReadAWord(dev, 0x1ae); /* hardware model (CT = 3) */ - nic_data.Model = (wrd & 0xff); - - wrd = ReadAWord(dev, 0x1af); /* media (indicates BNC/UTP) */ - nic_data.Media = (wrd & 0xff); - - wrd = ReadAWord(dev, 0x1a8); /* System Configuration Register */ - nic_data.SCR = (wrd >> 8); - - return 0; /* no errors */ -} - -/****************************************************************************** - * - * Loadable module skeleton - * - */ -#ifdef MODULE -static struct net_device *de620_dev; - -int __init init_module(void) -{ - de620_dev = de620_probe(-1); - if (IS_ERR(de620_dev)) - return PTR_ERR(de620_dev); - return 0; -} - -void cleanup_module(void) -{ - unregister_netdev(de620_dev); - release_region(de620_dev->base_addr, 3); - free_netdev(de620_dev); -} -#endif /* MODULE */ -MODULE_LICENSE("GPL"); diff --git a/drivers/net/de620.h b/drivers/net/de620.h deleted file mode 100644 index e8d9a88f4cb5..000000000000 --- a/drivers/net/de620.h +++ /dev/null @@ -1,117 +0,0 @@ -/********************************************************* - * * - * Definition of D-Link DE-620 Ethernet Pocket adapter * - * * - *********************************************************/ - -/* DE-620's CMD port Command */ -#define CS0 0x08 /* 1->0 command strobe */ -#define ICEN 0x04 /* 0=enable DL3520 host interface */ -#define DS0 0x02 /* 1->0 data strobe 0 */ -#define DS1 0x01 /* 1->0 data strobe 1 */ - -#define WDIR 0x20 /* general 0=read 1=write */ -#define RDIR 0x00 /* (not 100% confirm ) */ -#define PS2WDIR 0x00 /* ps/2 mode 1=read, 0=write */ -#define PS2RDIR 0x20 - -#define IRQEN 0x10 /* 1 = enable printer IRQ line */ -#define SELECTIN 0x08 /* 1 = select printer */ -#define INITP 0x04 /* 0 = initial printer */ -#define AUTOFEED 0x02 /* 1 = printer auto form feed */ -#define STROBE 0x01 /* 0->1 data strobe */ - -#define RESET 0x08 -#define NIS0 0x20 /* 0 = BNC, 1 = UTP */ -#define NCTL0 0x10 - -/* DE-620 DIC Command */ -#define W_DUMMY 0x00 /* DIC reserved command */ -#define W_CR 0x20 /* DIC write command register */ -#define W_NPR 0x40 /* DIC write Next Page Register */ -#define W_TBR 0x60 /* DIC write Tx Byte Count 1 reg */ -#define W_RSA 0x80 /* DIC write Remote Start Addr 1 */ - -/* DE-620's STAT port bits 7-4 */ -#define EMPTY 0x80 /* 1 = receive buffer empty */ -#define INTLEVEL 0x40 /* 1 = interrupt level is high */ -#define TXBF1 0x20 /* 1 = transmit buffer 1 is in use */ -#define TXBF0 0x10 /* 1 = transmit buffer 0 is in use */ -#define READY 0x08 /* 1 = h/w ready to accept cmd/data */ - -/* IDC 1 Command */ -#define W_RSA1 0xa0 /* write remote start address 1 */ -#define W_RSA0 0xa1 /* write remote start address 0 */ -#define W_NPRF 0xa2 /* write next page register NPR15-NPR8 */ -#define W_DFR 0xa3 /* write delay factor register */ -#define W_CPR 0xa4 /* write current page register */ -#define W_SPR 0xa5 /* write start page register */ -#define W_EPR 0xa6 /* write end page register */ -#define W_SCR 0xa7 /* write system configuration register */ -#define W_TCR 0xa8 /* write Transceiver Configuration reg */ -#define W_EIP 0xa9 /* write EEPM Interface port */ -#define W_PAR0 0xaa /* write physical address register 0 */ -#define W_PAR1 0xab /* write physical address register 1 */ -#define W_PAR2 0xac /* write physical address register 2 */ -#define W_PAR3 0xad /* write physical address register 3 */ -#define W_PAR4 0xae /* write physical address register 4 */ -#define W_PAR5 0xaf /* write physical address register 5 */ - -/* IDC 2 Command */ -#define R_STS 0xc0 /* read status register */ -#define R_CPR 0xc1 /* read current page register */ -#define R_BPR 0xc2 /* read boundary page register */ -#define R_TDR 0xc3 /* read time domain reflectometry reg */ - -/* STATUS Register */ -#define EEDI 0x80 /* EEPM DO pin */ -#define TXSUC 0x40 /* tx success */ -#define T16 0x20 /* tx fail 16 times */ -#define TS1 0x40 /* 0=Tx success, 1=T16 */ -#define TS0 0x20 /* 0=Tx success, 1=T16 */ -#define RXGOOD 0x10 /* rx a good packet */ -#define RXCRC 0x08 /* rx a CRC error packet */ -#define RXSHORT 0x04 /* rx a short packet */ -#define COLS 0x02 /* coaxial collision status */ -#define LNKS 0x01 /* UTP link status */ - -/* Command Register */ -#define CLEAR 0x10 /* reset part of hardware */ -#define NOPER 0x08 /* No Operation */ -#define RNOP 0x08 -#define RRA 0x06 /* After RR then auto-advance NPR & BPR(=NPR-1) */ -#define RRN 0x04 /* Normal Remote Read mode */ -#define RW1 0x02 /* Remote Write tx buffer 1 ( page 6 - 11 ) */ -#define RW0 0x00 /* Remote Write tx buffer 0 ( page 0 - 5 ) */ -#define TXEN 0x01 /* 0->1 tx enable */ - -/* System Configuration Register */ -#define TESTON 0x80 /* test host data transfer reliability */ -#define SLEEP 0x40 /* sleep mode */ -#if 0 -#define FASTMODE 0x04 /* fast mode for intel 82360SL fast mode */ -#define BYTEMODE 0x02 /* byte mode */ -#else -#define FASTMODE 0x20 /* fast mode for intel 82360SL fast mode */ -#define BYTEMODE 0x10 /* byte mode */ -#endif -#define NIBBLEMODE 0x00 /* nibble mode */ -#define IRQINV 0x08 /* turn off IRQ line inverter */ -#define IRQNML 0x00 /* turn on IRQ line inverter */ -#define INTON 0x04 -#define AUTOFFSET 0x02 /* auto shift address to TPR+12 */ -#define AUTOTX 0x01 /* auto tx when leave RW mode */ - -/* Transceiver Configuration Register */ -#define JABBER 0x80 /* generate jabber condition */ -#define TXSUCINT 0x40 /* enable tx success interrupt */ -#define T16INT 0x20 /* enable T16 interrupt */ -#define RXERRPKT 0x10 /* accept CRC error or short packet */ -#define EXTERNALB2 0x0C /* external loopback 2 */ -#define EXTERNALB1 0x08 /* external loopback 1 */ -#define INTERNALB 0x04 /* internal loopback */ -#define NMLOPERATE 0x00 /* normal operation */ -#define RXPBM 0x03 /* rx physical, broadcast, multicast */ -#define RXPB 0x02 /* rx physical, broadcast */ -#define RXALL 0x01 /* rx all packet */ -#define RXOFF 0x00 /* rx disable */ diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c deleted file mode 100644 index ed73e4a93508..000000000000 --- a/drivers/net/dl2k.c +++ /dev/null @@ -1,1824 +0,0 @@ -/* D-Link DL2000-based Gigabit Ethernet Adapter Linux driver */ -/* - Copyright (c) 2001, 2002 by D-Link Corporation - Written by Edward Peng. - Created 03-May-2001, base on Linux' sundance.c. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. -*/ - -#define DRV_NAME "DL2000/TC902x-based linux driver" -#define DRV_VERSION "v1.19" -#define DRV_RELDATE "2007/08/12" -#include "dl2k.h" -#include - -static char version[] __devinitdata = - KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n"; -#define MAX_UNITS 8 -static int mtu[MAX_UNITS]; -static int vlan[MAX_UNITS]; -static int jumbo[MAX_UNITS]; -static char *media[MAX_UNITS]; -static int tx_flow=-1; -static int rx_flow=-1; -static int copy_thresh; -static int rx_coalesce=10; /* Rx frame count each interrupt */ -static int rx_timeout=200; /* Rx DMA wait time in 640ns increments */ -static int tx_coalesce=16; /* HW xmit count each TxDMAComplete */ - - -MODULE_AUTHOR ("Edward Peng"); -MODULE_DESCRIPTION ("D-Link DL2000-based Gigabit Ethernet Adapter"); -MODULE_LICENSE("GPL"); -module_param_array(mtu, int, NULL, 0); -module_param_array(media, charp, NULL, 0); -module_param_array(vlan, int, NULL, 0); -module_param_array(jumbo, int, NULL, 0); -module_param(tx_flow, int, 0); -module_param(rx_flow, int, 0); -module_param(copy_thresh, int, 0); -module_param(rx_coalesce, int, 0); /* Rx frame count each interrupt */ -module_param(rx_timeout, int, 0); /* Rx DMA wait time in 64ns increments */ -module_param(tx_coalesce, int, 0); /* HW xmit count each TxDMAComplete */ - - -/* Enable the default interrupts */ -#define DEFAULT_INTR (RxDMAComplete | HostError | IntRequested | TxDMAComplete| \ - UpdateStats | LinkEvent) -#define EnableInt() \ -writew(DEFAULT_INTR, ioaddr + IntEnable) - -static const int max_intrloop = 50; -static const int multicast_filter_limit = 0x40; - -static int rio_open (struct net_device *dev); -static void rio_timer (unsigned long data); -static void rio_tx_timeout (struct net_device *dev); -static void alloc_list (struct net_device *dev); -static netdev_tx_t start_xmit (struct sk_buff *skb, struct net_device *dev); -static irqreturn_t rio_interrupt (int irq, void *dev_instance); -static void rio_free_tx (struct net_device *dev, int irq); -static void tx_error (struct net_device *dev, int tx_status); -static int receive_packet (struct net_device *dev); -static void rio_error (struct net_device *dev, int int_status); -static int change_mtu (struct net_device *dev, int new_mtu); -static void set_multicast (struct net_device *dev); -static struct net_device_stats *get_stats (struct net_device *dev); -static int clear_stats (struct net_device *dev); -static int rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); -static int rio_close (struct net_device *dev); -static int find_miiphy (struct net_device *dev); -static int parse_eeprom (struct net_device *dev); -static int read_eeprom (long ioaddr, int eep_addr); -static int mii_wait_link (struct net_device *dev, int wait); -static int mii_set_media (struct net_device *dev); -static int mii_get_media (struct net_device *dev); -static int mii_set_media_pcs (struct net_device *dev); -static int mii_get_media_pcs (struct net_device *dev); -static int mii_read (struct net_device *dev, int phy_addr, int reg_num); -static int mii_write (struct net_device *dev, int phy_addr, int reg_num, - u16 data); - -static const struct ethtool_ops ethtool_ops; - -static const struct net_device_ops netdev_ops = { - .ndo_open = rio_open, - .ndo_start_xmit = start_xmit, - .ndo_stop = rio_close, - .ndo_get_stats = get_stats, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_set_multicast_list = set_multicast, - .ndo_do_ioctl = rio_ioctl, - .ndo_tx_timeout = rio_tx_timeout, - .ndo_change_mtu = change_mtu, -}; - -static int __devinit -rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct net_device *dev; - struct netdev_private *np; - static int card_idx; - int chip_idx = ent->driver_data; - int err, irq; - long ioaddr; - static int version_printed; - void *ring_space; - dma_addr_t ring_dma; - - if (!version_printed++) - printk ("%s", version); - - err = pci_enable_device (pdev); - if (err) - return err; - - irq = pdev->irq; - err = pci_request_regions (pdev, "dl2k"); - if (err) - goto err_out_disable; - - pci_set_master (pdev); - dev = alloc_etherdev (sizeof (*np)); - if (!dev) { - err = -ENOMEM; - goto err_out_res; - } - SET_NETDEV_DEV(dev, &pdev->dev); - -#ifdef MEM_MAPPING - ioaddr = pci_resource_start (pdev, 1); - ioaddr = (long) ioremap (ioaddr, RIO_IO_SIZE); - if (!ioaddr) { - err = -ENOMEM; - goto err_out_dev; - } -#else - ioaddr = pci_resource_start (pdev, 0); -#endif - dev->base_addr = ioaddr; - dev->irq = irq; - np = netdev_priv(dev); - np->chip_id = chip_idx; - np->pdev = pdev; - spin_lock_init (&np->tx_lock); - spin_lock_init (&np->rx_lock); - - /* Parse manual configuration */ - np->an_enable = 1; - np->tx_coalesce = 1; - if (card_idx < MAX_UNITS) { - if (media[card_idx] != NULL) { - np->an_enable = 0; - if (strcmp (media[card_idx], "auto") == 0 || - strcmp (media[card_idx], "autosense") == 0 || - strcmp (media[card_idx], "0") == 0 ) { - np->an_enable = 2; - } else if (strcmp (media[card_idx], "100mbps_fd") == 0 || - strcmp (media[card_idx], "4") == 0) { - np->speed = 100; - np->full_duplex = 1; - } else if (strcmp (media[card_idx], "100mbps_hd") == 0 || - strcmp (media[card_idx], "3") == 0) { - np->speed = 100; - np->full_duplex = 0; - } else if (strcmp (media[card_idx], "10mbps_fd") == 0 || - strcmp (media[card_idx], "2") == 0) { - np->speed = 10; - np->full_duplex = 1; - } else if (strcmp (media[card_idx], "10mbps_hd") == 0 || - strcmp (media[card_idx], "1") == 0) { - np->speed = 10; - np->full_duplex = 0; - } else if (strcmp (media[card_idx], "1000mbps_fd") == 0 || - strcmp (media[card_idx], "6") == 0) { - np->speed=1000; - np->full_duplex=1; - } else if (strcmp (media[card_idx], "1000mbps_hd") == 0 || - strcmp (media[card_idx], "5") == 0) { - np->speed = 1000; - np->full_duplex = 0; - } else { - np->an_enable = 1; - } - } - if (jumbo[card_idx] != 0) { - np->jumbo = 1; - dev->mtu = MAX_JUMBO; - } else { - np->jumbo = 0; - if (mtu[card_idx] > 0 && mtu[card_idx] < PACKET_SIZE) - dev->mtu = mtu[card_idx]; - } - np->vlan = (vlan[card_idx] > 0 && vlan[card_idx] < 4096) ? - vlan[card_idx] : 0; - if (rx_coalesce > 0 && rx_timeout > 0) { - np->rx_coalesce = rx_coalesce; - np->rx_timeout = rx_timeout; - np->coalesce = 1; - } - np->tx_flow = (tx_flow == 0) ? 0 : 1; - np->rx_flow = (rx_flow == 0) ? 0 : 1; - - if (tx_coalesce < 1) - tx_coalesce = 1; - else if (tx_coalesce > TX_RING_SIZE-1) - tx_coalesce = TX_RING_SIZE - 1; - } - dev->netdev_ops = &netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - SET_ETHTOOL_OPS(dev, ðtool_ops); -#if 0 - dev->features = NETIF_F_IP_CSUM; -#endif - pci_set_drvdata (pdev, dev); - - ring_space = pci_alloc_consistent (pdev, TX_TOTAL_SIZE, &ring_dma); - if (!ring_space) - goto err_out_iounmap; - np->tx_ring = ring_space; - np->tx_ring_dma = ring_dma; - - ring_space = pci_alloc_consistent (pdev, RX_TOTAL_SIZE, &ring_dma); - if (!ring_space) - goto err_out_unmap_tx; - np->rx_ring = ring_space; - np->rx_ring_dma = ring_dma; - - /* Parse eeprom data */ - parse_eeprom (dev); - - /* Find PHY address */ - err = find_miiphy (dev); - if (err) - goto err_out_unmap_rx; - - /* Fiber device? */ - np->phy_media = (readw(ioaddr + ASICCtrl) & PhyMedia) ? 1 : 0; - np->link_status = 0; - /* Set media and reset PHY */ - if (np->phy_media) { - /* default Auto-Negotiation for fiber deivices */ - if (np->an_enable == 2) { - np->an_enable = 1; - } - mii_set_media_pcs (dev); - } else { - /* Auto-Negotiation is mandatory for 1000BASE-T, - IEEE 802.3ab Annex 28D page 14 */ - if (np->speed == 1000) - np->an_enable = 1; - mii_set_media (dev); - } - - err = register_netdev (dev); - if (err) - goto err_out_unmap_rx; - - card_idx++; - - printk (KERN_INFO "%s: %s, %pM, IRQ %d\n", - dev->name, np->name, dev->dev_addr, irq); - if (tx_coalesce > 1) - printk(KERN_INFO "tx_coalesce:\t%d packets\n", - tx_coalesce); - if (np->coalesce) - printk(KERN_INFO - "rx_coalesce:\t%d packets\n" - "rx_timeout: \t%d ns\n", - np->rx_coalesce, np->rx_timeout*640); - if (np->vlan) - printk(KERN_INFO "vlan(id):\t%d\n", np->vlan); - return 0; - - err_out_unmap_rx: - pci_free_consistent (pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma); - err_out_unmap_tx: - pci_free_consistent (pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma); - err_out_iounmap: -#ifdef MEM_MAPPING - iounmap ((void *) ioaddr); - - err_out_dev: -#endif - free_netdev (dev); - - err_out_res: - pci_release_regions (pdev); - - err_out_disable: - pci_disable_device (pdev); - return err; -} - -static int -find_miiphy (struct net_device *dev) -{ - int i, phy_found = 0; - struct netdev_private *np; - long ioaddr; - np = netdev_priv(dev); - ioaddr = dev->base_addr; - np->phy_addr = 1; - - for (i = 31; i >= 0; i--) { - int mii_status = mii_read (dev, i, 1); - if (mii_status != 0xffff && mii_status != 0x0000) { - np->phy_addr = i; - phy_found++; - } - } - if (!phy_found) { - printk (KERN_ERR "%s: No MII PHY found!\n", dev->name); - return -ENODEV; - } - return 0; -} - -static int -parse_eeprom (struct net_device *dev) -{ - int i, j; - long ioaddr = dev->base_addr; - u8 sromdata[256]; - u8 *psib; - u32 crc; - PSROM_t psrom = (PSROM_t) sromdata; - struct netdev_private *np = netdev_priv(dev); - - int cid, next; - -#ifdef MEM_MAPPING - ioaddr = pci_resource_start (np->pdev, 0); -#endif - /* Read eeprom */ - for (i = 0; i < 128; i++) { - ((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom (ioaddr, i)); - } -#ifdef MEM_MAPPING - ioaddr = dev->base_addr; -#endif - if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) { /* D-Link Only */ - /* Check CRC */ - crc = ~ether_crc_le (256 - 4, sromdata); - if (psrom->crc != cpu_to_le32(crc)) { - printk (KERN_ERR "%s: EEPROM data CRC error.\n", - dev->name); - return -1; - } - } - - /* Set MAC address */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = psrom->mac_addr[i]; - - if (np->pdev->vendor != PCI_VENDOR_ID_DLINK) { - return 0; - } - - /* Parse Software Information Block */ - i = 0x30; - psib = (u8 *) sromdata; - do { - cid = psib[i++]; - next = psib[i++]; - if ((cid == 0 && next == 0) || (cid == 0xff && next == 0xff)) { - printk (KERN_ERR "Cell data error\n"); - return -1; - } - switch (cid) { - case 0: /* Format version */ - break; - case 1: /* End of cell */ - return 0; - case 2: /* Duplex Polarity */ - np->duplex_polarity = psib[i]; - writeb (readb (ioaddr + PhyCtrl) | psib[i], - ioaddr + PhyCtrl); - break; - case 3: /* Wake Polarity */ - np->wake_polarity = psib[i]; - break; - case 9: /* Adapter description */ - j = (next - i > 255) ? 255 : next - i; - memcpy (np->name, &(psib[i]), j); - break; - case 4: - case 5: - case 6: - case 7: - case 8: /* Reversed */ - break; - default: /* Unknown cell */ - return -1; - } - i = next; - } while (1); - - return 0; -} - -static int -rio_open (struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - long ioaddr = dev->base_addr; - int i; - u16 macctrl; - - i = request_irq (dev->irq, rio_interrupt, IRQF_SHARED, dev->name, dev); - if (i) - return i; - - /* Reset all logic functions */ - writew (GlobalReset | DMAReset | FIFOReset | NetworkReset | HostReset, - ioaddr + ASICCtrl + 2); - mdelay(10); - - /* DebugCtrl bit 4, 5, 9 must set */ - writel (readl (ioaddr + DebugCtrl) | 0x0230, ioaddr + DebugCtrl); - - /* Jumbo frame */ - if (np->jumbo != 0) - writew (MAX_JUMBO+14, ioaddr + MaxFrameSize); - - alloc_list (dev); - - /* Get station address */ - for (i = 0; i < 6; i++) - writeb (dev->dev_addr[i], ioaddr + StationAddr0 + i); - - set_multicast (dev); - if (np->coalesce) { - writel (np->rx_coalesce | np->rx_timeout << 16, - ioaddr + RxDMAIntCtrl); - } - /* Set RIO to poll every N*320nsec. */ - writeb (0x20, ioaddr + RxDMAPollPeriod); - writeb (0xff, ioaddr + TxDMAPollPeriod); - writeb (0x30, ioaddr + RxDMABurstThresh); - writeb (0x30, ioaddr + RxDMAUrgentThresh); - writel (0x0007ffff, ioaddr + RmonStatMask); - /* clear statistics */ - clear_stats (dev); - - /* VLAN supported */ - if (np->vlan) { - /* priority field in RxDMAIntCtrl */ - writel (readl(ioaddr + RxDMAIntCtrl) | 0x7 << 10, - ioaddr + RxDMAIntCtrl); - /* VLANId */ - writew (np->vlan, ioaddr + VLANId); - /* Length/Type should be 0x8100 */ - writel (0x8100 << 16 | np->vlan, ioaddr + VLANTag); - /* Enable AutoVLANuntagging, but disable AutoVLANtagging. - VLAN information tagged by TFC' VID, CFI fields. */ - writel (readl (ioaddr + MACCtrl) | AutoVLANuntagging, - ioaddr + MACCtrl); - } - - init_timer (&np->timer); - np->timer.expires = jiffies + 1*HZ; - np->timer.data = (unsigned long) dev; - np->timer.function = rio_timer; - add_timer (&np->timer); - - /* Start Tx/Rx */ - writel (readl (ioaddr + MACCtrl) | StatsEnable | RxEnable | TxEnable, - ioaddr + MACCtrl); - - macctrl = 0; - macctrl |= (np->vlan) ? AutoVLANuntagging : 0; - macctrl |= (np->full_duplex) ? DuplexSelect : 0; - macctrl |= (np->tx_flow) ? TxFlowControlEnable : 0; - macctrl |= (np->rx_flow) ? RxFlowControlEnable : 0; - writew(macctrl, ioaddr + MACCtrl); - - netif_start_queue (dev); - - /* Enable default interrupts */ - EnableInt (); - return 0; -} - -static void -rio_timer (unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct netdev_private *np = netdev_priv(dev); - unsigned int entry; - int next_tick = 1*HZ; - unsigned long flags; - - spin_lock_irqsave(&np->rx_lock, flags); - /* Recover rx ring exhausted error */ - if (np->cur_rx - np->old_rx >= RX_RING_SIZE) { - printk(KERN_INFO "Try to recover rx ring exhausted...\n"); - /* Re-allocate skbuffs to fill the descriptor ring */ - for (; np->cur_rx - np->old_rx > 0; np->old_rx++) { - struct sk_buff *skb; - entry = np->old_rx % RX_RING_SIZE; - /* Dropped packets don't need to re-allocate */ - if (np->rx_skbuff[entry] == NULL) { - skb = netdev_alloc_skb_ip_align(dev, - np->rx_buf_sz); - if (skb == NULL) { - np->rx_ring[entry].fraginfo = 0; - printk (KERN_INFO - "%s: Still unable to re-allocate Rx skbuff.#%d\n", - dev->name, entry); - break; - } - np->rx_skbuff[entry] = skb; - np->rx_ring[entry].fraginfo = - cpu_to_le64 (pci_map_single - (np->pdev, skb->data, np->rx_buf_sz, - PCI_DMA_FROMDEVICE)); - } - np->rx_ring[entry].fraginfo |= - cpu_to_le64((u64)np->rx_buf_sz << 48); - np->rx_ring[entry].status = 0; - } /* end for */ - } /* end if */ - spin_unlock_irqrestore (&np->rx_lock, flags); - np->timer.expires = jiffies + next_tick; - add_timer(&np->timer); -} - -static void -rio_tx_timeout (struct net_device *dev) -{ - long ioaddr = dev->base_addr; - - printk (KERN_INFO "%s: Tx timed out (%4.4x), is buffer full?\n", - dev->name, readl (ioaddr + TxStatus)); - rio_free_tx(dev, 0); - dev->if_port = 0; - dev->trans_start = jiffies; /* prevent tx timeout */ -} - - /* allocate and initialize Tx and Rx descriptors */ -static void -alloc_list (struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int i; - - np->cur_rx = np->cur_tx = 0; - np->old_rx = np->old_tx = 0; - np->rx_buf_sz = (dev->mtu <= 1500 ? PACKET_SIZE : dev->mtu + 32); - - /* Initialize Tx descriptors, TFDListPtr leaves in start_xmit(). */ - for (i = 0; i < TX_RING_SIZE; i++) { - np->tx_skbuff[i] = NULL; - np->tx_ring[i].status = cpu_to_le64 (TFDDone); - np->tx_ring[i].next_desc = cpu_to_le64 (np->tx_ring_dma + - ((i+1)%TX_RING_SIZE) * - sizeof (struct netdev_desc)); - } - - /* Initialize Rx descriptors */ - for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].next_desc = cpu_to_le64 (np->rx_ring_dma + - ((i + 1) % RX_RING_SIZE) * - sizeof (struct netdev_desc)); - np->rx_ring[i].status = 0; - np->rx_ring[i].fraginfo = 0; - np->rx_skbuff[i] = NULL; - } - - /* Allocate the rx buffers */ - for (i = 0; i < RX_RING_SIZE; i++) { - /* Allocated fixed size of skbuff */ - struct sk_buff *skb; - - skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz); - np->rx_skbuff[i] = skb; - if (skb == NULL) { - printk (KERN_ERR - "%s: alloc_list: allocate Rx buffer error! ", - dev->name); - break; - } - /* Rubicon now supports 40 bits of addressing space. */ - np->rx_ring[i].fraginfo = - cpu_to_le64 ( pci_map_single ( - np->pdev, skb->data, np->rx_buf_sz, - PCI_DMA_FROMDEVICE)); - np->rx_ring[i].fraginfo |= cpu_to_le64((u64)np->rx_buf_sz << 48); - } - - /* Set RFDListPtr */ - writel (np->rx_ring_dma, dev->base_addr + RFDListPtr0); - writel (0, dev->base_addr + RFDListPtr1); -} - -static netdev_tx_t -start_xmit (struct sk_buff *skb, struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - struct netdev_desc *txdesc; - unsigned entry; - u32 ioaddr; - u64 tfc_vlan_tag = 0; - - if (np->link_status == 0) { /* Link Down */ - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - ioaddr = dev->base_addr; - entry = np->cur_tx % TX_RING_SIZE; - np->tx_skbuff[entry] = skb; - txdesc = &np->tx_ring[entry]; - -#if 0 - if (skb->ip_summed == CHECKSUM_PARTIAL) { - txdesc->status |= - cpu_to_le64 (TCPChecksumEnable | UDPChecksumEnable | - IPChecksumEnable); - } -#endif - if (np->vlan) { - tfc_vlan_tag = VLANTagInsert | - ((u64)np->vlan << 32) | - ((u64)skb->priority << 45); - } - txdesc->fraginfo = cpu_to_le64 (pci_map_single (np->pdev, skb->data, - skb->len, - PCI_DMA_TODEVICE)); - txdesc->fraginfo |= cpu_to_le64((u64)skb->len << 48); - - /* DL2K bug: DMA fails to get next descriptor ptr in 10Mbps mode - * Work around: Always use 1 descriptor in 10Mbps mode */ - if (entry % np->tx_coalesce == 0 || np->speed == 10) - txdesc->status = cpu_to_le64 (entry | tfc_vlan_tag | - WordAlignDisable | - TxDMAIndicate | - (1 << FragCountShift)); - else - txdesc->status = cpu_to_le64 (entry | tfc_vlan_tag | - WordAlignDisable | - (1 << FragCountShift)); - - /* TxDMAPollNow */ - writel (readl (ioaddr + DMACtrl) | 0x00001000, ioaddr + DMACtrl); - /* Schedule ISR */ - writel(10000, ioaddr + CountDown); - np->cur_tx = (np->cur_tx + 1) % TX_RING_SIZE; - if ((np->cur_tx - np->old_tx + TX_RING_SIZE) % TX_RING_SIZE - < TX_QUEUE_LEN - 1 && np->speed != 10) { - /* do nothing */ - } else if (!netif_queue_stopped(dev)) { - netif_stop_queue (dev); - } - - /* The first TFDListPtr */ - if (readl (dev->base_addr + TFDListPtr0) == 0) { - writel (np->tx_ring_dma + entry * sizeof (struct netdev_desc), - dev->base_addr + TFDListPtr0); - writel (0, dev->base_addr + TFDListPtr1); - } - - return NETDEV_TX_OK; -} - -static irqreturn_t -rio_interrupt (int irq, void *dev_instance) -{ - struct net_device *dev = dev_instance; - struct netdev_private *np; - unsigned int_status; - long ioaddr; - int cnt = max_intrloop; - int handled = 0; - - ioaddr = dev->base_addr; - np = netdev_priv(dev); - while (1) { - int_status = readw (ioaddr + IntStatus); - writew (int_status, ioaddr + IntStatus); - int_status &= DEFAULT_INTR; - if (int_status == 0 || --cnt < 0) - break; - handled = 1; - /* Processing received packets */ - if (int_status & RxDMAComplete) - receive_packet (dev); - /* TxDMAComplete interrupt */ - if ((int_status & (TxDMAComplete|IntRequested))) { - int tx_status; - tx_status = readl (ioaddr + TxStatus); - if (tx_status & 0x01) - tx_error (dev, tx_status); - /* Free used tx skbuffs */ - rio_free_tx (dev, 1); - } - - /* Handle uncommon events */ - if (int_status & - (HostError | LinkEvent | UpdateStats)) - rio_error (dev, int_status); - } - if (np->cur_tx != np->old_tx) - writel (100, ioaddr + CountDown); - return IRQ_RETVAL(handled); -} - -static inline dma_addr_t desc_to_dma(struct netdev_desc *desc) -{ - return le64_to_cpu(desc->fraginfo) & DMA_BIT_MASK(48); -} - -static void -rio_free_tx (struct net_device *dev, int irq) -{ - struct netdev_private *np = netdev_priv(dev); - int entry = np->old_tx % TX_RING_SIZE; - int tx_use = 0; - unsigned long flag = 0; - - if (irq) - spin_lock(&np->tx_lock); - else - spin_lock_irqsave(&np->tx_lock, flag); - - /* Free used tx skbuffs */ - while (entry != np->cur_tx) { - struct sk_buff *skb; - - if (!(np->tx_ring[entry].status & cpu_to_le64(TFDDone))) - break; - skb = np->tx_skbuff[entry]; - pci_unmap_single (np->pdev, - desc_to_dma(&np->tx_ring[entry]), - skb->len, PCI_DMA_TODEVICE); - if (irq) - dev_kfree_skb_irq (skb); - else - dev_kfree_skb (skb); - - np->tx_skbuff[entry] = NULL; - entry = (entry + 1) % TX_RING_SIZE; - tx_use++; - } - if (irq) - spin_unlock(&np->tx_lock); - else - spin_unlock_irqrestore(&np->tx_lock, flag); - np->old_tx = entry; - - /* If the ring is no longer full, clear tx_full and - call netif_wake_queue() */ - - if (netif_queue_stopped(dev) && - ((np->cur_tx - np->old_tx + TX_RING_SIZE) % TX_RING_SIZE - < TX_QUEUE_LEN - 1 || np->speed == 10)) { - netif_wake_queue (dev); - } -} - -static void -tx_error (struct net_device *dev, int tx_status) -{ - struct netdev_private *np; - long ioaddr = dev->base_addr; - int frame_id; - int i; - - np = netdev_priv(dev); - - frame_id = (tx_status & 0xffff0000); - printk (KERN_ERR "%s: Transmit error, TxStatus %4.4x, FrameId %d.\n", - dev->name, tx_status, frame_id); - np->stats.tx_errors++; - /* Ttransmit Underrun */ - if (tx_status & 0x10) { - np->stats.tx_fifo_errors++; - writew (readw (ioaddr + TxStartThresh) + 0x10, - ioaddr + TxStartThresh); - /* Transmit Underrun need to set TxReset, DMARest, FIFOReset */ - writew (TxReset | DMAReset | FIFOReset | NetworkReset, - ioaddr + ASICCtrl + 2); - /* Wait for ResetBusy bit clear */ - for (i = 50; i > 0; i--) { - if ((readw (ioaddr + ASICCtrl + 2) & ResetBusy) == 0) - break; - mdelay (1); - } - rio_free_tx (dev, 1); - /* Reset TFDListPtr */ - writel (np->tx_ring_dma + - np->old_tx * sizeof (struct netdev_desc), - dev->base_addr + TFDListPtr0); - writel (0, dev->base_addr + TFDListPtr1); - - /* Let TxStartThresh stay default value */ - } - /* Late Collision */ - if (tx_status & 0x04) { - np->stats.tx_fifo_errors++; - /* TxReset and clear FIFO */ - writew (TxReset | FIFOReset, ioaddr + ASICCtrl + 2); - /* Wait reset done */ - for (i = 50; i > 0; i--) { - if ((readw (ioaddr + ASICCtrl + 2) & ResetBusy) == 0) - break; - mdelay (1); - } - /* Let TxStartThresh stay default value */ - } - /* Maximum Collisions */ -#ifdef ETHER_STATS - if (tx_status & 0x08) - np->stats.collisions16++; -#else - if (tx_status & 0x08) - np->stats.collisions++; -#endif - /* Restart the Tx */ - writel (readw (dev->base_addr + MACCtrl) | TxEnable, ioaddr + MACCtrl); -} - -static int -receive_packet (struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int entry = np->cur_rx % RX_RING_SIZE; - int cnt = 30; - - /* If RFDDone, FrameStart and FrameEnd set, there is a new packet in. */ - while (1) { - struct netdev_desc *desc = &np->rx_ring[entry]; - int pkt_len; - u64 frame_status; - - if (!(desc->status & cpu_to_le64(RFDDone)) || - !(desc->status & cpu_to_le64(FrameStart)) || - !(desc->status & cpu_to_le64(FrameEnd))) - break; - - /* Chip omits the CRC. */ - frame_status = le64_to_cpu(desc->status); - pkt_len = frame_status & 0xffff; - if (--cnt < 0) - break; - /* Update rx error statistics, drop packet. */ - if (frame_status & RFS_Errors) { - np->stats.rx_errors++; - if (frame_status & (RxRuntFrame | RxLengthError)) - np->stats.rx_length_errors++; - if (frame_status & RxFCSError) - np->stats.rx_crc_errors++; - if (frame_status & RxAlignmentError && np->speed != 1000) - np->stats.rx_frame_errors++; - if (frame_status & RxFIFOOverrun) - np->stats.rx_fifo_errors++; - } else { - struct sk_buff *skb; - - /* Small skbuffs for short packets */ - if (pkt_len > copy_thresh) { - pci_unmap_single (np->pdev, - desc_to_dma(desc), - np->rx_buf_sz, - PCI_DMA_FROMDEVICE); - skb_put (skb = np->rx_skbuff[entry], pkt_len); - np->rx_skbuff[entry] = NULL; - } else if ((skb = netdev_alloc_skb_ip_align(dev, pkt_len))) { - pci_dma_sync_single_for_cpu(np->pdev, - desc_to_dma(desc), - np->rx_buf_sz, - PCI_DMA_FROMDEVICE); - skb_copy_to_linear_data (skb, - np->rx_skbuff[entry]->data, - pkt_len); - skb_put (skb, pkt_len); - pci_dma_sync_single_for_device(np->pdev, - desc_to_dma(desc), - np->rx_buf_sz, - PCI_DMA_FROMDEVICE); - } - skb->protocol = eth_type_trans (skb, dev); -#if 0 - /* Checksum done by hw, but csum value unavailable. */ - if (np->pdev->pci_rev_id >= 0x0c && - !(frame_status & (TCPError | UDPError | IPError))) { - skb->ip_summed = CHECKSUM_UNNECESSARY; - } -#endif - netif_rx (skb); - } - entry = (entry + 1) % RX_RING_SIZE; - } - spin_lock(&np->rx_lock); - np->cur_rx = entry; - /* Re-allocate skbuffs to fill the descriptor ring */ - entry = np->old_rx; - while (entry != np->cur_rx) { - struct sk_buff *skb; - /* Dropped packets don't need to re-allocate */ - if (np->rx_skbuff[entry] == NULL) { - skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz); - if (skb == NULL) { - np->rx_ring[entry].fraginfo = 0; - printk (KERN_INFO - "%s: receive_packet: " - "Unable to re-allocate Rx skbuff.#%d\n", - dev->name, entry); - break; - } - np->rx_skbuff[entry] = skb; - np->rx_ring[entry].fraginfo = - cpu_to_le64 (pci_map_single - (np->pdev, skb->data, np->rx_buf_sz, - PCI_DMA_FROMDEVICE)); - } - np->rx_ring[entry].fraginfo |= - cpu_to_le64((u64)np->rx_buf_sz << 48); - np->rx_ring[entry].status = 0; - entry = (entry + 1) % RX_RING_SIZE; - } - np->old_rx = entry; - spin_unlock(&np->rx_lock); - return 0; -} - -static void -rio_error (struct net_device *dev, int int_status) -{ - long ioaddr = dev->base_addr; - struct netdev_private *np = netdev_priv(dev); - u16 macctrl; - - /* Link change event */ - if (int_status & LinkEvent) { - if (mii_wait_link (dev, 10) == 0) { - printk (KERN_INFO "%s: Link up\n", dev->name); - if (np->phy_media) - mii_get_media_pcs (dev); - else - mii_get_media (dev); - if (np->speed == 1000) - np->tx_coalesce = tx_coalesce; - else - np->tx_coalesce = 1; - macctrl = 0; - macctrl |= (np->vlan) ? AutoVLANuntagging : 0; - macctrl |= (np->full_duplex) ? DuplexSelect : 0; - macctrl |= (np->tx_flow) ? - TxFlowControlEnable : 0; - macctrl |= (np->rx_flow) ? - RxFlowControlEnable : 0; - writew(macctrl, ioaddr + MACCtrl); - np->link_status = 1; - netif_carrier_on(dev); - } else { - printk (KERN_INFO "%s: Link off\n", dev->name); - np->link_status = 0; - netif_carrier_off(dev); - } - } - - /* UpdateStats statistics registers */ - if (int_status & UpdateStats) { - get_stats (dev); - } - - /* PCI Error, a catastronphic error related to the bus interface - occurs, set GlobalReset and HostReset to reset. */ - if (int_status & HostError) { - printk (KERN_ERR "%s: HostError! IntStatus %4.4x.\n", - dev->name, int_status); - writew (GlobalReset | HostReset, ioaddr + ASICCtrl + 2); - mdelay (500); - } -} - -static struct net_device_stats * -get_stats (struct net_device *dev) -{ - long ioaddr = dev->base_addr; - struct netdev_private *np = netdev_priv(dev); -#ifdef MEM_MAPPING - int i; -#endif - unsigned int stat_reg; - - /* All statistics registers need to be acknowledged, - else statistic overflow could cause problems */ - - np->stats.rx_packets += readl (ioaddr + FramesRcvOk); - np->stats.tx_packets += readl (ioaddr + FramesXmtOk); - np->stats.rx_bytes += readl (ioaddr + OctetRcvOk); - np->stats.tx_bytes += readl (ioaddr + OctetXmtOk); - - np->stats.multicast = readl (ioaddr + McstFramesRcvdOk); - np->stats.collisions += readl (ioaddr + SingleColFrames) - + readl (ioaddr + MultiColFrames); - - /* detailed tx errors */ - stat_reg = readw (ioaddr + FramesAbortXSColls); - np->stats.tx_aborted_errors += stat_reg; - np->stats.tx_errors += stat_reg; - - stat_reg = readw (ioaddr + CarrierSenseErrors); - np->stats.tx_carrier_errors += stat_reg; - np->stats.tx_errors += stat_reg; - - /* Clear all other statistic register. */ - readl (ioaddr + McstOctetXmtOk); - readw (ioaddr + BcstFramesXmtdOk); - readl (ioaddr + McstFramesXmtdOk); - readw (ioaddr + BcstFramesRcvdOk); - readw (ioaddr + MacControlFramesRcvd); - readw (ioaddr + FrameTooLongErrors); - readw (ioaddr + InRangeLengthErrors); - readw (ioaddr + FramesCheckSeqErrors); - readw (ioaddr + FramesLostRxErrors); - readl (ioaddr + McstOctetXmtOk); - readl (ioaddr + BcstOctetXmtOk); - readl (ioaddr + McstFramesXmtdOk); - readl (ioaddr + FramesWDeferredXmt); - readl (ioaddr + LateCollisions); - readw (ioaddr + BcstFramesXmtdOk); - readw (ioaddr + MacControlFramesXmtd); - readw (ioaddr + FramesWEXDeferal); - -#ifdef MEM_MAPPING - for (i = 0x100; i <= 0x150; i += 4) - readl (ioaddr + i); -#endif - readw (ioaddr + TxJumboFrames); - readw (ioaddr + RxJumboFrames); - readw (ioaddr + TCPCheckSumErrors); - readw (ioaddr + UDPCheckSumErrors); - readw (ioaddr + IPCheckSumErrors); - return &np->stats; -} - -static int -clear_stats (struct net_device *dev) -{ - long ioaddr = dev->base_addr; -#ifdef MEM_MAPPING - int i; -#endif - - /* All statistics registers need to be acknowledged, - else statistic overflow could cause problems */ - readl (ioaddr + FramesRcvOk); - readl (ioaddr + FramesXmtOk); - readl (ioaddr + OctetRcvOk); - readl (ioaddr + OctetXmtOk); - - readl (ioaddr + McstFramesRcvdOk); - readl (ioaddr + SingleColFrames); - readl (ioaddr + MultiColFrames); - readl (ioaddr + LateCollisions); - /* detailed rx errors */ - readw (ioaddr + FrameTooLongErrors); - readw (ioaddr + InRangeLengthErrors); - readw (ioaddr + FramesCheckSeqErrors); - readw (ioaddr + FramesLostRxErrors); - - /* detailed tx errors */ - readw (ioaddr + FramesAbortXSColls); - readw (ioaddr + CarrierSenseErrors); - - /* Clear all other statistic register. */ - readl (ioaddr + McstOctetXmtOk); - readw (ioaddr + BcstFramesXmtdOk); - readl (ioaddr + McstFramesXmtdOk); - readw (ioaddr + BcstFramesRcvdOk); - readw (ioaddr + MacControlFramesRcvd); - readl (ioaddr + McstOctetXmtOk); - readl (ioaddr + BcstOctetXmtOk); - readl (ioaddr + McstFramesXmtdOk); - readl (ioaddr + FramesWDeferredXmt); - readw (ioaddr + BcstFramesXmtdOk); - readw (ioaddr + MacControlFramesXmtd); - readw (ioaddr + FramesWEXDeferal); -#ifdef MEM_MAPPING - for (i = 0x100; i <= 0x150; i += 4) - readl (ioaddr + i); -#endif - readw (ioaddr + TxJumboFrames); - readw (ioaddr + RxJumboFrames); - readw (ioaddr + TCPCheckSumErrors); - readw (ioaddr + UDPCheckSumErrors); - readw (ioaddr + IPCheckSumErrors); - return 0; -} - - -static int -change_mtu (struct net_device *dev, int new_mtu) -{ - struct netdev_private *np = netdev_priv(dev); - int max = (np->jumbo) ? MAX_JUMBO : 1536; - - if ((new_mtu < 68) || (new_mtu > max)) { - return -EINVAL; - } - - dev->mtu = new_mtu; - - return 0; -} - -static void -set_multicast (struct net_device *dev) -{ - long ioaddr = dev->base_addr; - u32 hash_table[2]; - u16 rx_mode = 0; - struct netdev_private *np = netdev_priv(dev); - - hash_table[0] = hash_table[1] = 0; - /* RxFlowcontrol DA: 01-80-C2-00-00-01. Hash index=0x39 */ - hash_table[1] |= 0x02000000; - if (dev->flags & IFF_PROMISC) { - /* Receive all frames promiscuously. */ - rx_mode = ReceiveAllFrames; - } else if ((dev->flags & IFF_ALLMULTI) || - (netdev_mc_count(dev) > multicast_filter_limit)) { - /* Receive broadcast and multicast frames */ - rx_mode = ReceiveBroadcast | ReceiveMulticast | ReceiveUnicast; - } else if (!netdev_mc_empty(dev)) { - struct netdev_hw_addr *ha; - /* Receive broadcast frames and multicast frames filtering - by Hashtable */ - rx_mode = - ReceiveBroadcast | ReceiveMulticastHash | ReceiveUnicast; - netdev_for_each_mc_addr(ha, dev) { - int bit, index = 0; - int crc = ether_crc_le(ETH_ALEN, ha->addr); - /* The inverted high significant 6 bits of CRC are - used as an index to hashtable */ - for (bit = 0; bit < 6; bit++) - if (crc & (1 << (31 - bit))) - index |= (1 << bit); - hash_table[index / 32] |= (1 << (index % 32)); - } - } else { - rx_mode = ReceiveBroadcast | ReceiveUnicast; - } - if (np->vlan) { - /* ReceiveVLANMatch field in ReceiveMode */ - rx_mode |= ReceiveVLANMatch; - } - - writel (hash_table[0], ioaddr + HashTable0); - writel (hash_table[1], ioaddr + HashTable1); - writew (rx_mode, ioaddr + ReceiveMode); -} - -static void rio_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct netdev_private *np = netdev_priv(dev); - strcpy(info->driver, "dl2k"); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(np->pdev)); -} - -static int rio_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct netdev_private *np = netdev_priv(dev); - if (np->phy_media) { - /* fiber device */ - cmd->supported = SUPPORTED_Autoneg | SUPPORTED_FIBRE; - cmd->advertising= ADVERTISED_Autoneg | ADVERTISED_FIBRE; - cmd->port = PORT_FIBRE; - cmd->transceiver = XCVR_INTERNAL; - } else { - /* copper device */ - cmd->supported = SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | - SUPPORTED_Autoneg | SUPPORTED_MII; - cmd->advertising = ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | ADVERTISED_1000baseT_Full| - ADVERTISED_Autoneg | ADVERTISED_MII; - cmd->port = PORT_MII; - cmd->transceiver = XCVR_INTERNAL; - } - if ( np->link_status ) { - ethtool_cmd_speed_set(cmd, np->speed); - cmd->duplex = np->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; - } else { - ethtool_cmd_speed_set(cmd, -1); - cmd->duplex = -1; - } - if ( np->an_enable) - cmd->autoneg = AUTONEG_ENABLE; - else - cmd->autoneg = AUTONEG_DISABLE; - - cmd->phy_address = np->phy_addr; - return 0; -} - -static int rio_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct netdev_private *np = netdev_priv(dev); - netif_carrier_off(dev); - if (cmd->autoneg == AUTONEG_ENABLE) { - if (np->an_enable) - return 0; - else { - np->an_enable = 1; - mii_set_media(dev); - return 0; - } - } else { - np->an_enable = 0; - if (np->speed == 1000) { - ethtool_cmd_speed_set(cmd, SPEED_100); - cmd->duplex = DUPLEX_FULL; - printk("Warning!! Can't disable Auto negotiation in 1000Mbps, change to Manual 100Mbps, Full duplex.\n"); - } - switch (ethtool_cmd_speed(cmd)) { - case SPEED_10: - np->speed = 10; - np->full_duplex = (cmd->duplex == DUPLEX_FULL); - break; - case SPEED_100: - np->speed = 100; - np->full_duplex = (cmd->duplex == DUPLEX_FULL); - break; - case SPEED_1000: /* not supported */ - default: - return -EINVAL; - } - mii_set_media(dev); - } - return 0; -} - -static u32 rio_get_link(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - return np->link_status; -} - -static const struct ethtool_ops ethtool_ops = { - .get_drvinfo = rio_get_drvinfo, - .get_settings = rio_get_settings, - .set_settings = rio_set_settings, - .get_link = rio_get_link, -}; - -static int -rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) -{ - int phy_addr; - struct netdev_private *np = netdev_priv(dev); - struct mii_data *miidata = (struct mii_data *) &rq->ifr_ifru; - - struct netdev_desc *desc; - int i; - - phy_addr = np->phy_addr; - switch (cmd) { - case SIOCDEVPRIVATE: - break; - - case SIOCDEVPRIVATE + 1: - miidata->out_value = mii_read (dev, phy_addr, miidata->reg_num); - break; - case SIOCDEVPRIVATE + 2: - mii_write (dev, phy_addr, miidata->reg_num, miidata->in_value); - break; - case SIOCDEVPRIVATE + 3: - break; - case SIOCDEVPRIVATE + 4: - break; - case SIOCDEVPRIVATE + 5: - netif_stop_queue (dev); - break; - case SIOCDEVPRIVATE + 6: - netif_wake_queue (dev); - break; - case SIOCDEVPRIVATE + 7: - printk - ("tx_full=%x cur_tx=%lx old_tx=%lx cur_rx=%lx old_rx=%lx\n", - netif_queue_stopped(dev), np->cur_tx, np->old_tx, np->cur_rx, - np->old_rx); - break; - case SIOCDEVPRIVATE + 8: - printk("TX ring:\n"); - for (i = 0; i < TX_RING_SIZE; i++) { - desc = &np->tx_ring[i]; - printk - ("%02x:cur:%08x next:%08x status:%08x frag1:%08x frag0:%08x", - i, - (u32) (np->tx_ring_dma + i * sizeof (*desc)), - (u32)le64_to_cpu(desc->next_desc), - (u32)le64_to_cpu(desc->status), - (u32)(le64_to_cpu(desc->fraginfo) >> 32), - (u32)le64_to_cpu(desc->fraginfo)); - printk ("\n"); - } - printk ("\n"); - break; - - default: - return -EOPNOTSUPP; - } - return 0; -} - -#define EEP_READ 0x0200 -#define EEP_BUSY 0x8000 -/* Read the EEPROM word */ -/* We use I/O instruction to read/write eeprom to avoid fail on some machines */ -static int -read_eeprom (long ioaddr, int eep_addr) -{ - int i = 1000; - outw (EEP_READ | (eep_addr & 0xff), ioaddr + EepromCtrl); - while (i-- > 0) { - if (!(inw (ioaddr + EepromCtrl) & EEP_BUSY)) { - return inw (ioaddr + EepromData); - } - } - return 0; -} - -enum phy_ctrl_bits { - MII_READ = 0x00, MII_CLK = 0x01, MII_DATA1 = 0x02, MII_WRITE = 0x04, - MII_DUPLEX = 0x08, -}; - -#define mii_delay() readb(ioaddr) -static void -mii_sendbit (struct net_device *dev, u32 data) -{ - long ioaddr = dev->base_addr + PhyCtrl; - data = (data) ? MII_DATA1 : 0; - data |= MII_WRITE; - data |= (readb (ioaddr) & 0xf8) | MII_WRITE; - writeb (data, ioaddr); - mii_delay (); - writeb (data | MII_CLK, ioaddr); - mii_delay (); -} - -static int -mii_getbit (struct net_device *dev) -{ - long ioaddr = dev->base_addr + PhyCtrl; - u8 data; - - data = (readb (ioaddr) & 0xf8) | MII_READ; - writeb (data, ioaddr); - mii_delay (); - writeb (data | MII_CLK, ioaddr); - mii_delay (); - return ((readb (ioaddr) >> 1) & 1); -} - -static void -mii_send_bits (struct net_device *dev, u32 data, int len) -{ - int i; - for (i = len - 1; i >= 0; i--) { - mii_sendbit (dev, data & (1 << i)); - } -} - -static int -mii_read (struct net_device *dev, int phy_addr, int reg_num) -{ - u32 cmd; - int i; - u32 retval = 0; - - /* Preamble */ - mii_send_bits (dev, 0xffffffff, 32); - /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ - /* ST,OP = 0110'b for read operation */ - cmd = (0x06 << 10 | phy_addr << 5 | reg_num); - mii_send_bits (dev, cmd, 14); - /* Turnaround */ - if (mii_getbit (dev)) - goto err_out; - /* Read data */ - for (i = 0; i < 16; i++) { - retval |= mii_getbit (dev); - retval <<= 1; - } - /* End cycle */ - mii_getbit (dev); - return (retval >> 1) & 0xffff; - - err_out: - return 0; -} -static int -mii_write (struct net_device *dev, int phy_addr, int reg_num, u16 data) -{ - u32 cmd; - - /* Preamble */ - mii_send_bits (dev, 0xffffffff, 32); - /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ - /* ST,OP,AAAAA,RRRRR,TA = 0101xxxxxxxxxx10'b = 0x5002 for write */ - cmd = (0x5002 << 16) | (phy_addr << 23) | (reg_num << 18) | data; - mii_send_bits (dev, cmd, 32); - /* End cycle */ - mii_getbit (dev); - return 0; -} -static int -mii_wait_link (struct net_device *dev, int wait) -{ - __u16 bmsr; - int phy_addr; - struct netdev_private *np; - - np = netdev_priv(dev); - phy_addr = np->phy_addr; - - do { - bmsr = mii_read (dev, phy_addr, MII_BMSR); - if (bmsr & MII_BMSR_LINK_STATUS) - return 0; - mdelay (1); - } while (--wait > 0); - return -1; -} -static int -mii_get_media (struct net_device *dev) -{ - __u16 negotiate; - __u16 bmsr; - __u16 mscr; - __u16 mssr; - int phy_addr; - struct netdev_private *np; - - np = netdev_priv(dev); - phy_addr = np->phy_addr; - - bmsr = mii_read (dev, phy_addr, MII_BMSR); - if (np->an_enable) { - if (!(bmsr & MII_BMSR_AN_COMPLETE)) { - /* Auto-Negotiation not completed */ - return -1; - } - negotiate = mii_read (dev, phy_addr, MII_ANAR) & - mii_read (dev, phy_addr, MII_ANLPAR); - mscr = mii_read (dev, phy_addr, MII_MSCR); - mssr = mii_read (dev, phy_addr, MII_MSSR); - if (mscr & MII_MSCR_1000BT_FD && mssr & MII_MSSR_LP_1000BT_FD) { - np->speed = 1000; - np->full_duplex = 1; - printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n"); - } else if (mscr & MII_MSCR_1000BT_HD && mssr & MII_MSSR_LP_1000BT_HD) { - np->speed = 1000; - np->full_duplex = 0; - printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n"); - } else if (negotiate & MII_ANAR_100BX_FD) { - np->speed = 100; - np->full_duplex = 1; - printk (KERN_INFO "Auto 100 Mbps, Full duplex\n"); - } else if (negotiate & MII_ANAR_100BX_HD) { - np->speed = 100; - np->full_duplex = 0; - printk (KERN_INFO "Auto 100 Mbps, Half duplex\n"); - } else if (negotiate & MII_ANAR_10BT_FD) { - np->speed = 10; - np->full_duplex = 1; - printk (KERN_INFO "Auto 10 Mbps, Full duplex\n"); - } else if (negotiate & MII_ANAR_10BT_HD) { - np->speed = 10; - np->full_duplex = 0; - printk (KERN_INFO "Auto 10 Mbps, Half duplex\n"); - } - if (negotiate & MII_ANAR_PAUSE) { - np->tx_flow &= 1; - np->rx_flow &= 1; - } else if (negotiate & MII_ANAR_ASYMMETRIC) { - np->tx_flow = 0; - np->rx_flow &= 1; - } - /* else tx_flow, rx_flow = user select */ - } else { - __u16 bmcr = mii_read (dev, phy_addr, MII_BMCR); - switch (bmcr & (MII_BMCR_SPEED_100 | MII_BMCR_SPEED_1000)) { - case MII_BMCR_SPEED_1000: - printk (KERN_INFO "Operating at 1000 Mbps, "); - break; - case MII_BMCR_SPEED_100: - printk (KERN_INFO "Operating at 100 Mbps, "); - break; - case 0: - printk (KERN_INFO "Operating at 10 Mbps, "); - } - if (bmcr & MII_BMCR_DUPLEX_MODE) { - printk (KERN_CONT "Full duplex\n"); - } else { - printk (KERN_CONT "Half duplex\n"); - } - } - if (np->tx_flow) - printk(KERN_INFO "Enable Tx Flow Control\n"); - else - printk(KERN_INFO "Disable Tx Flow Control\n"); - if (np->rx_flow) - printk(KERN_INFO "Enable Rx Flow Control\n"); - else - printk(KERN_INFO "Disable Rx Flow Control\n"); - - return 0; -} - -static int -mii_set_media (struct net_device *dev) -{ - __u16 pscr; - __u16 bmcr; - __u16 bmsr; - __u16 anar; - int phy_addr; - struct netdev_private *np; - np = netdev_priv(dev); - phy_addr = np->phy_addr; - - /* Does user set speed? */ - if (np->an_enable) { - /* Advertise capabilities */ - bmsr = mii_read (dev, phy_addr, MII_BMSR); - anar = mii_read (dev, phy_addr, MII_ANAR) & - ~MII_ANAR_100BX_FD & - ~MII_ANAR_100BX_HD & - ~MII_ANAR_100BT4 & - ~MII_ANAR_10BT_FD & - ~MII_ANAR_10BT_HD; - if (bmsr & MII_BMSR_100BX_FD) - anar |= MII_ANAR_100BX_FD; - if (bmsr & MII_BMSR_100BX_HD) - anar |= MII_ANAR_100BX_HD; - if (bmsr & MII_BMSR_100BT4) - anar |= MII_ANAR_100BT4; - if (bmsr & MII_BMSR_10BT_FD) - anar |= MII_ANAR_10BT_FD; - if (bmsr & MII_BMSR_10BT_HD) - anar |= MII_ANAR_10BT_HD; - anar |= MII_ANAR_PAUSE | MII_ANAR_ASYMMETRIC; - mii_write (dev, phy_addr, MII_ANAR, anar); - - /* Enable Auto crossover */ - pscr = mii_read (dev, phy_addr, MII_PHY_SCR); - pscr |= 3 << 5; /* 11'b */ - mii_write (dev, phy_addr, MII_PHY_SCR, pscr); - - /* Soft reset PHY */ - mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET); - bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN | MII_BMCR_RESET; - mii_write (dev, phy_addr, MII_BMCR, bmcr); - mdelay(1); - } else { - /* Force speed setting */ - /* 1) Disable Auto crossover */ - pscr = mii_read (dev, phy_addr, MII_PHY_SCR); - pscr &= ~(3 << 5); - mii_write (dev, phy_addr, MII_PHY_SCR, pscr); - - /* 2) PHY Reset */ - bmcr = mii_read (dev, phy_addr, MII_BMCR); - bmcr |= MII_BMCR_RESET; - mii_write (dev, phy_addr, MII_BMCR, bmcr); - - /* 3) Power Down */ - bmcr = 0x1940; /* must be 0x1940 */ - mii_write (dev, phy_addr, MII_BMCR, bmcr); - mdelay (100); /* wait a certain time */ - - /* 4) Advertise nothing */ - mii_write (dev, phy_addr, MII_ANAR, 0); - - /* 5) Set media and Power Up */ - bmcr = MII_BMCR_POWER_DOWN; - if (np->speed == 100) { - bmcr |= MII_BMCR_SPEED_100; - printk (KERN_INFO "Manual 100 Mbps, "); - } else if (np->speed == 10) { - printk (KERN_INFO "Manual 10 Mbps, "); - } - if (np->full_duplex) { - bmcr |= MII_BMCR_DUPLEX_MODE; - printk (KERN_CONT "Full duplex\n"); - } else { - printk (KERN_CONT "Half duplex\n"); - } -#if 0 - /* Set 1000BaseT Master/Slave setting */ - mscr = mii_read (dev, phy_addr, MII_MSCR); - mscr |= MII_MSCR_CFG_ENABLE; - mscr &= ~MII_MSCR_CFG_VALUE = 0; -#endif - mii_write (dev, phy_addr, MII_BMCR, bmcr); - mdelay(10); - } - return 0; -} - -static int -mii_get_media_pcs (struct net_device *dev) -{ - __u16 negotiate; - __u16 bmsr; - int phy_addr; - struct netdev_private *np; - - np = netdev_priv(dev); - phy_addr = np->phy_addr; - - bmsr = mii_read (dev, phy_addr, PCS_BMSR); - if (np->an_enable) { - if (!(bmsr & MII_BMSR_AN_COMPLETE)) { - /* Auto-Negotiation not completed */ - return -1; - } - negotiate = mii_read (dev, phy_addr, PCS_ANAR) & - mii_read (dev, phy_addr, PCS_ANLPAR); - np->speed = 1000; - if (negotiate & PCS_ANAR_FULL_DUPLEX) { - printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n"); - np->full_duplex = 1; - } else { - printk (KERN_INFO "Auto 1000 Mbps, half duplex\n"); - np->full_duplex = 0; - } - if (negotiate & PCS_ANAR_PAUSE) { - np->tx_flow &= 1; - np->rx_flow &= 1; - } else if (negotiate & PCS_ANAR_ASYMMETRIC) { - np->tx_flow = 0; - np->rx_flow &= 1; - } - /* else tx_flow, rx_flow = user select */ - } else { - __u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR); - printk (KERN_INFO "Operating at 1000 Mbps, "); - if (bmcr & MII_BMCR_DUPLEX_MODE) { - printk (KERN_CONT "Full duplex\n"); - } else { - printk (KERN_CONT "Half duplex\n"); - } - } - if (np->tx_flow) - printk(KERN_INFO "Enable Tx Flow Control\n"); - else - printk(KERN_INFO "Disable Tx Flow Control\n"); - if (np->rx_flow) - printk(KERN_INFO "Enable Rx Flow Control\n"); - else - printk(KERN_INFO "Disable Rx Flow Control\n"); - - return 0; -} - -static int -mii_set_media_pcs (struct net_device *dev) -{ - __u16 bmcr; - __u16 esr; - __u16 anar; - int phy_addr; - struct netdev_private *np; - np = netdev_priv(dev); - phy_addr = np->phy_addr; - - /* Auto-Negotiation? */ - if (np->an_enable) { - /* Advertise capabilities */ - esr = mii_read (dev, phy_addr, PCS_ESR); - anar = mii_read (dev, phy_addr, MII_ANAR) & - ~PCS_ANAR_HALF_DUPLEX & - ~PCS_ANAR_FULL_DUPLEX; - if (esr & (MII_ESR_1000BT_HD | MII_ESR_1000BX_HD)) - anar |= PCS_ANAR_HALF_DUPLEX; - if (esr & (MII_ESR_1000BT_FD | MII_ESR_1000BX_FD)) - anar |= PCS_ANAR_FULL_DUPLEX; - anar |= PCS_ANAR_PAUSE | PCS_ANAR_ASYMMETRIC; - mii_write (dev, phy_addr, MII_ANAR, anar); - - /* Soft reset PHY */ - mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET); - bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN | - MII_BMCR_RESET; - mii_write (dev, phy_addr, MII_BMCR, bmcr); - mdelay(1); - } else { - /* Force speed setting */ - /* PHY Reset */ - bmcr = MII_BMCR_RESET; - mii_write (dev, phy_addr, MII_BMCR, bmcr); - mdelay(10); - if (np->full_duplex) { - bmcr = MII_BMCR_DUPLEX_MODE; - printk (KERN_INFO "Manual full duplex\n"); - } else { - bmcr = 0; - printk (KERN_INFO "Manual half duplex\n"); - } - mii_write (dev, phy_addr, MII_BMCR, bmcr); - mdelay(10); - - /* Advertise nothing */ - mii_write (dev, phy_addr, MII_ANAR, 0); - } - return 0; -} - - -static int -rio_close (struct net_device *dev) -{ - long ioaddr = dev->base_addr; - struct netdev_private *np = netdev_priv(dev); - struct sk_buff *skb; - int i; - - netif_stop_queue (dev); - - /* Disable interrupts */ - writew (0, ioaddr + IntEnable); - - /* Stop Tx and Rx logics */ - writel (TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl); - - free_irq (dev->irq, dev); - del_timer_sync (&np->timer); - - /* Free all the skbuffs in the queue. */ - for (i = 0; i < RX_RING_SIZE; i++) { - skb = np->rx_skbuff[i]; - if (skb) { - pci_unmap_single(np->pdev, - desc_to_dma(&np->rx_ring[i]), - skb->len, PCI_DMA_FROMDEVICE); - dev_kfree_skb (skb); - np->rx_skbuff[i] = NULL; - } - np->rx_ring[i].status = 0; - np->rx_ring[i].fraginfo = 0; - } - for (i = 0; i < TX_RING_SIZE; i++) { - skb = np->tx_skbuff[i]; - if (skb) { - pci_unmap_single(np->pdev, - desc_to_dma(&np->tx_ring[i]), - skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb (skb); - np->tx_skbuff[i] = NULL; - } - } - - return 0; -} - -static void __devexit -rio_remove1 (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata (pdev); - - if (dev) { - struct netdev_private *np = netdev_priv(dev); - - unregister_netdev (dev); - pci_free_consistent (pdev, RX_TOTAL_SIZE, np->rx_ring, - np->rx_ring_dma); - pci_free_consistent (pdev, TX_TOTAL_SIZE, np->tx_ring, - np->tx_ring_dma); -#ifdef MEM_MAPPING - iounmap ((char *) (dev->base_addr)); -#endif - free_netdev (dev); - pci_release_regions (pdev); - pci_disable_device (pdev); - } - pci_set_drvdata (pdev, NULL); -} - -static struct pci_driver rio_driver = { - .name = "dl2k", - .id_table = rio_pci_tbl, - .probe = rio_probe1, - .remove = __devexit_p(rio_remove1), -}; - -static int __init -rio_init (void) -{ - return pci_register_driver(&rio_driver); -} - -static void __exit -rio_exit (void) -{ - pci_unregister_driver (&rio_driver); -} - -module_init (rio_init); -module_exit (rio_exit); - -/* - -Compile command: - -gcc -D__KERNEL__ -DMODULE -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -c dl2k.c - -Read Documentation/networking/dl2k.txt for details. - -*/ - diff --git a/drivers/net/dl2k.h b/drivers/net/dl2k.h deleted file mode 100644 index 7caab3d26a9e..000000000000 --- a/drivers/net/dl2k.h +++ /dev/null @@ -1,554 +0,0 @@ -/* D-Link DL2000-based Gigabit Ethernet Adapter Linux driver */ -/* - Copyright (c) 2001, 2002 by D-Link Corporation - Written by Edward Peng. - Created 03-May-2001, base on Linux' sundance.c. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. -*/ - -#ifndef __DL2K_H__ -#define __DL2K_H__ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* Processor type for cache alignment. */ -#include -#include -#include -#include -#include -#define TX_RING_SIZE 256 -#define TX_QUEUE_LEN (TX_RING_SIZE - 1) /* Limit ring entries actually used.*/ -#define RX_RING_SIZE 256 -#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct netdev_desc) -#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct netdev_desc) - -/* This driver was written to use PCI memory space, however x86-oriented - hardware often uses I/O space accesses. */ -#ifndef MEM_MAPPING -#undef readb -#undef readw -#undef readl -#undef writeb -#undef writew -#undef writel -#define readb inb -#define readw inw -#define readl inl -#define writeb outb -#define writew outw -#define writel outl -#endif - -/* Offsets to the device registers. - Unlike software-only systems, device drivers interact with complex hardware. - It's not useful to define symbolic names for every register bit in the - device. The name can only partially document the semantics and make - the driver longer and more difficult to read. - In general, only the important configuration values or bits changed - multiple times should be defined symbolically. -*/ -enum dl2x_offsets { - /* I/O register offsets */ - DMACtrl = 0x00, - RxDMAStatus = 0x08, - TFDListPtr0 = 0x10, - TFDListPtr1 = 0x14, - TxDMABurstThresh = 0x18, - TxDMAUrgentThresh = 0x19, - TxDMAPollPeriod = 0x1a, - RFDListPtr0 = 0x1c, - RFDListPtr1 = 0x20, - RxDMABurstThresh = 0x24, - RxDMAUrgentThresh = 0x25, - RxDMAPollPeriod = 0x26, - RxDMAIntCtrl = 0x28, - DebugCtrl = 0x2c, - ASICCtrl = 0x30, - FifoCtrl = 0x38, - RxEarlyThresh = 0x3a, - FlowOffThresh = 0x3c, - FlowOnThresh = 0x3e, - TxStartThresh = 0x44, - EepromData = 0x48, - EepromCtrl = 0x4a, - ExpromAddr = 0x4c, - Exprodata = 0x50, - WakeEvent = 0x51, - CountDown = 0x54, - IntStatusAck = 0x5a, - IntEnable = 0x5c, - IntStatus = 0x5e, - TxStatus = 0x60, - MACCtrl = 0x6c, - VLANTag = 0x70, - PhyCtrl = 0x76, - StationAddr0 = 0x78, - StationAddr1 = 0x7a, - StationAddr2 = 0x7c, - VLANId = 0x80, - MaxFrameSize = 0x86, - ReceiveMode = 0x88, - HashTable0 = 0x8c, - HashTable1 = 0x90, - RmonStatMask = 0x98, - StatMask = 0x9c, - RxJumboFrames = 0xbc, - TCPCheckSumErrors = 0xc0, - IPCheckSumErrors = 0xc2, - UDPCheckSumErrors = 0xc4, - TxJumboFrames = 0xf4, - /* Ethernet MIB statistic register offsets */ - OctetRcvOk = 0xa8, - McstOctetRcvOk = 0xac, - BcstOctetRcvOk = 0xb0, - FramesRcvOk = 0xb4, - McstFramesRcvdOk = 0xb8, - BcstFramesRcvdOk = 0xbe, - MacControlFramesRcvd = 0xc6, - FrameTooLongErrors = 0xc8, - InRangeLengthErrors = 0xca, - FramesCheckSeqErrors = 0xcc, - FramesLostRxErrors = 0xce, - OctetXmtOk = 0xd0, - McstOctetXmtOk = 0xd4, - BcstOctetXmtOk = 0xd8, - FramesXmtOk = 0xdc, - McstFramesXmtdOk = 0xe0, - FramesWDeferredXmt = 0xe4, - LateCollisions = 0xe8, - MultiColFrames = 0xec, - SingleColFrames = 0xf0, - BcstFramesXmtdOk = 0xf6, - CarrierSenseErrors = 0xf8, - MacControlFramesXmtd = 0xfa, - FramesAbortXSColls = 0xfc, - FramesWEXDeferal = 0xfe, - /* RMON statistic register offsets */ - EtherStatsCollisions = 0x100, - EtherStatsOctetsTransmit = 0x104, - EtherStatsPktsTransmit = 0x108, - EtherStatsPkts64OctetTransmit = 0x10c, - EtherStats65to127OctetsTransmit = 0x110, - EtherStatsPkts128to255OctetsTransmit = 0x114, - EtherStatsPkts256to511OctetsTransmit = 0x118, - EtherStatsPkts512to1023OctetsTransmit = 0x11c, - EtherStatsPkts1024to1518OctetsTransmit = 0x120, - EtherStatsCRCAlignErrors = 0x124, - EtherStatsUndersizePkts = 0x128, - EtherStatsFragments = 0x12c, - EtherStatsJabbers = 0x130, - EtherStatsOctets = 0x134, - EtherStatsPkts = 0x138, - EtherStats64Octets = 0x13c, - EtherStatsPkts65to127Octets = 0x140, - EtherStatsPkts128to255Octets = 0x144, - EtherStatsPkts256to511Octets = 0x148, - EtherStatsPkts512to1023Octets = 0x14c, - EtherStatsPkts1024to1518Octets = 0x150, -}; - -/* Bits in the interrupt status/mask registers. */ -enum IntStatus_bits { - InterruptStatus = 0x0001, - HostError = 0x0002, - MACCtrlFrame = 0x0008, - TxComplete = 0x0004, - RxComplete = 0x0010, - RxEarly = 0x0020, - IntRequested = 0x0040, - UpdateStats = 0x0080, - LinkEvent = 0x0100, - TxDMAComplete = 0x0200, - RxDMAComplete = 0x0400, - RFDListEnd = 0x0800, - RxDMAPriority = 0x1000, -}; - -/* Bits in the ReceiveMode register. */ -enum ReceiveMode_bits { - ReceiveUnicast = 0x0001, - ReceiveMulticast = 0x0002, - ReceiveBroadcast = 0x0004, - ReceiveAllFrames = 0x0008, - ReceiveMulticastHash = 0x0010, - ReceiveIPMulticast = 0x0020, - ReceiveVLANMatch = 0x0100, - ReceiveVLANHash = 0x0200, -}; -/* Bits in MACCtrl. */ -enum MACCtrl_bits { - DuplexSelect = 0x20, - TxFlowControlEnable = 0x80, - RxFlowControlEnable = 0x0100, - RcvFCS = 0x200, - AutoVLANtagging = 0x1000, - AutoVLANuntagging = 0x2000, - StatsEnable = 0x00200000, - StatsDisable = 0x00400000, - StatsEnabled = 0x00800000, - TxEnable = 0x01000000, - TxDisable = 0x02000000, - TxEnabled = 0x04000000, - RxEnable = 0x08000000, - RxDisable = 0x10000000, - RxEnabled = 0x20000000, -}; - -enum ASICCtrl_LoWord_bits { - PhyMedia = 0x0080, -}; - -enum ASICCtrl_HiWord_bits { - GlobalReset = 0x0001, - RxReset = 0x0002, - TxReset = 0x0004, - DMAReset = 0x0008, - FIFOReset = 0x0010, - NetworkReset = 0x0020, - HostReset = 0x0040, - ResetBusy = 0x0400, -}; - -/* Transmit Frame Control bits */ -enum TFC_bits { - DwordAlign = 0x00000000, - WordAlignDisable = 0x00030000, - WordAlign = 0x00020000, - TCPChecksumEnable = 0x00040000, - UDPChecksumEnable = 0x00080000, - IPChecksumEnable = 0x00100000, - FCSAppendDisable = 0x00200000, - TxIndicate = 0x00400000, - TxDMAIndicate = 0x00800000, - FragCountShift = 24, - VLANTagInsert = 0x0000000010000000, - TFDDone = 0x80000000, - VIDShift = 32, - UsePriorityShift = 48, -}; - -/* Receive Frames Status bits */ -enum RFS_bits { - RxFIFOOverrun = 0x00010000, - RxRuntFrame = 0x00020000, - RxAlignmentError = 0x00040000, - RxFCSError = 0x00080000, - RxOverSizedFrame = 0x00100000, - RxLengthError = 0x00200000, - VLANDetected = 0x00400000, - TCPDetected = 0x00800000, - TCPError = 0x01000000, - UDPDetected = 0x02000000, - UDPError = 0x04000000, - IPDetected = 0x08000000, - IPError = 0x10000000, - FrameStart = 0x20000000, - FrameEnd = 0x40000000, - RFDDone = 0x80000000, - TCIShift = 32, - RFS_Errors = 0x003f0000, -}; - -#define MII_RESET_TIME_OUT 10000 -/* MII register */ -enum _mii_reg { - MII_BMCR = 0, - MII_BMSR = 1, - MII_PHY_ID1 = 2, - MII_PHY_ID2 = 3, - MII_ANAR = 4, - MII_ANLPAR = 5, - MII_ANER = 6, - MII_ANNPT = 7, - MII_ANLPRNP = 8, - MII_MSCR = 9, - MII_MSSR = 10, - MII_ESR = 15, - MII_PHY_SCR = 16, -}; -/* PCS register */ -enum _pcs_reg { - PCS_BMCR = 0, - PCS_BMSR = 1, - PCS_ANAR = 4, - PCS_ANLPAR = 5, - PCS_ANER = 6, - PCS_ANNPT = 7, - PCS_ANLPRNP = 8, - PCS_ESR = 15, -}; - -/* Basic Mode Control Register */ -enum _mii_bmcr { - MII_BMCR_RESET = 0x8000, - MII_BMCR_LOOP_BACK = 0x4000, - MII_BMCR_SPEED_LSB = 0x2000, - MII_BMCR_AN_ENABLE = 0x1000, - MII_BMCR_POWER_DOWN = 0x0800, - MII_BMCR_ISOLATE = 0x0400, - MII_BMCR_RESTART_AN = 0x0200, - MII_BMCR_DUPLEX_MODE = 0x0100, - MII_BMCR_COL_TEST = 0x0080, - MII_BMCR_SPEED_MSB = 0x0040, - MII_BMCR_SPEED_RESERVED = 0x003f, - MII_BMCR_SPEED_10 = 0, - MII_BMCR_SPEED_100 = MII_BMCR_SPEED_LSB, - MII_BMCR_SPEED_1000 = MII_BMCR_SPEED_MSB, -}; - -/* Basic Mode Status Register */ -enum _mii_bmsr { - MII_BMSR_100BT4 = 0x8000, - MII_BMSR_100BX_FD = 0x4000, - MII_BMSR_100BX_HD = 0x2000, - MII_BMSR_10BT_FD = 0x1000, - MII_BMSR_10BT_HD = 0x0800, - MII_BMSR_100BT2_FD = 0x0400, - MII_BMSR_100BT2_HD = 0x0200, - MII_BMSR_EXT_STATUS = 0x0100, - MII_BMSR_PREAMBLE_SUPP = 0x0040, - MII_BMSR_AN_COMPLETE = 0x0020, - MII_BMSR_REMOTE_FAULT = 0x0010, - MII_BMSR_AN_ABILITY = 0x0008, - MII_BMSR_LINK_STATUS = 0x0004, - MII_BMSR_JABBER_DETECT = 0x0002, - MII_BMSR_EXT_CAP = 0x0001, -}; - -/* ANAR */ -enum _mii_anar { - MII_ANAR_NEXT_PAGE = 0x8000, - MII_ANAR_REMOTE_FAULT = 0x4000, - MII_ANAR_ASYMMETRIC = 0x0800, - MII_ANAR_PAUSE = 0x0400, - MII_ANAR_100BT4 = 0x0200, - MII_ANAR_100BX_FD = 0x0100, - MII_ANAR_100BX_HD = 0x0080, - MII_ANAR_10BT_FD = 0x0020, - MII_ANAR_10BT_HD = 0x0010, - MII_ANAR_SELECTOR = 0x001f, - MII_IEEE8023_CSMACD = 0x0001, -}; - -/* ANLPAR */ -enum _mii_anlpar { - MII_ANLPAR_NEXT_PAGE = MII_ANAR_NEXT_PAGE, - MII_ANLPAR_REMOTE_FAULT = MII_ANAR_REMOTE_FAULT, - MII_ANLPAR_ASYMMETRIC = MII_ANAR_ASYMMETRIC, - MII_ANLPAR_PAUSE = MII_ANAR_PAUSE, - MII_ANLPAR_100BT4 = MII_ANAR_100BT4, - MII_ANLPAR_100BX_FD = MII_ANAR_100BX_FD, - MII_ANLPAR_100BX_HD = MII_ANAR_100BX_HD, - MII_ANLPAR_10BT_FD = MII_ANAR_10BT_FD, - MII_ANLPAR_10BT_HD = MII_ANAR_10BT_HD, - MII_ANLPAR_SELECTOR = MII_ANAR_SELECTOR, -}; - -/* Auto-Negotiation Expansion Register */ -enum _mii_aner { - MII_ANER_PAR_DETECT_FAULT = 0x0010, - MII_ANER_LP_NEXTPAGABLE = 0x0008, - MII_ANER_NETXTPAGABLE = 0x0004, - MII_ANER_PAGE_RECEIVED = 0x0002, - MII_ANER_LP_NEGOTIABLE = 0x0001, -}; - -/* MASTER-SLAVE Control Register */ -enum _mii_mscr { - MII_MSCR_TEST_MODE = 0xe000, - MII_MSCR_CFG_ENABLE = 0x1000, - MII_MSCR_CFG_VALUE = 0x0800, - MII_MSCR_PORT_VALUE = 0x0400, - MII_MSCR_1000BT_FD = 0x0200, - MII_MSCR_1000BT_HD = 0X0100, -}; - -/* MASTER-SLAVE Status Register */ -enum _mii_mssr { - MII_MSSR_CFG_FAULT = 0x8000, - MII_MSSR_CFG_RES = 0x4000, - MII_MSSR_LOCAL_RCV_STATUS = 0x2000, - MII_MSSR_REMOTE_RCVR = 0x1000, - MII_MSSR_LP_1000BT_FD = 0x0800, - MII_MSSR_LP_1000BT_HD = 0x0400, - MII_MSSR_IDLE_ERR_COUNT = 0x00ff, -}; - -/* IEEE Extened Status Register */ -enum _mii_esr { - MII_ESR_1000BX_FD = 0x8000, - MII_ESR_1000BX_HD = 0x4000, - MII_ESR_1000BT_FD = 0x2000, - MII_ESR_1000BT_HD = 0x1000, -}; -/* PHY Specific Control Register */ -#if 0 -typedef union t_MII_PHY_SCR { - u16 image; - struct { - u16 disable_jabber:1; // bit 0 - u16 polarity_reversal:1; // bit 1 - u16 SEQ_test:1; // bit 2 - u16 _bit_3:1; // bit 3 - u16 disable_CLK125:1; // bit 4 - u16 mdi_crossover_mode:2; // bit 6:5 - u16 enable_ext_dist:1; // bit 7 - u16 _bit_8_9:2; // bit 9:8 - u16 force_link:1; // bit 10 - u16 assert_CRS:1; // bit 11 - u16 rcv_fifo_depth:2; // bit 13:12 - u16 xmit_fifo_depth:2; // bit 15:14 - } bits; -} PHY_SCR_t, *PPHY_SCR_t; -#endif - -typedef enum t_MII_ADMIN_STATUS { - adm_reset, - adm_operational, - adm_loopback, - adm_power_down, - adm_isolate -} MII_ADMIN_t, *PMII_ADMIN_t; - -/* Physical Coding Sublayer Management (PCS) */ -/* PCS control and status registers bitmap as the same as MII */ -/* PCS Extended Status register bitmap as the same as MII */ -/* PCS ANAR */ -enum _pcs_anar { - PCS_ANAR_NEXT_PAGE = 0x8000, - PCS_ANAR_REMOTE_FAULT = 0x3000, - PCS_ANAR_ASYMMETRIC = 0x0100, - PCS_ANAR_PAUSE = 0x0080, - PCS_ANAR_HALF_DUPLEX = 0x0040, - PCS_ANAR_FULL_DUPLEX = 0x0020, -}; -/* PCS ANLPAR */ -enum _pcs_anlpar { - PCS_ANLPAR_NEXT_PAGE = PCS_ANAR_NEXT_PAGE, - PCS_ANLPAR_REMOTE_FAULT = PCS_ANAR_REMOTE_FAULT, - PCS_ANLPAR_ASYMMETRIC = PCS_ANAR_ASYMMETRIC, - PCS_ANLPAR_PAUSE = PCS_ANAR_PAUSE, - PCS_ANLPAR_HALF_DUPLEX = PCS_ANAR_HALF_DUPLEX, - PCS_ANLPAR_FULL_DUPLEX = PCS_ANAR_FULL_DUPLEX, -}; - -typedef struct t_SROM { - u16 config_param; /* 0x00 */ - u16 asic_ctrl; /* 0x02 */ - u16 sub_vendor_id; /* 0x04 */ - u16 sub_system_id; /* 0x06 */ - u16 reserved1[12]; /* 0x08-0x1f */ - u8 mac_addr[6]; /* 0x20-0x25 */ - u8 reserved2[10]; /* 0x26-0x2f */ - u8 sib[204]; /* 0x30-0xfb */ - u32 crc; /* 0xfc-0xff */ -} SROM_t, *PSROM_t; - -/* Ioctl custom data */ -struct ioctl_data { - char signature[10]; - int cmd; - int len; - char *data; -}; - -struct mii_data { - __u16 reserved; - __u16 reg_num; - __u16 in_value; - __u16 out_value; -}; - -/* The Rx and Tx buffer descriptors. */ -struct netdev_desc { - __le64 next_desc; - __le64 status; - __le64 fraginfo; -}; - -#define PRIV_ALIGN 15 /* Required alignment mask */ -/* Use __attribute__((aligned (L1_CACHE_BYTES))) to maintain alignment - within the structure. */ -struct netdev_private { - /* Descriptor rings first for alignment. */ - struct netdev_desc *rx_ring; - struct netdev_desc *tx_ring; - struct sk_buff *rx_skbuff[RX_RING_SIZE]; - struct sk_buff *tx_skbuff[TX_RING_SIZE]; - dma_addr_t tx_ring_dma; - dma_addr_t rx_ring_dma; - struct pci_dev *pdev; - spinlock_t tx_lock; - spinlock_t rx_lock; - struct net_device_stats stats; - unsigned int rx_buf_sz; /* Based on MTU+slack. */ - unsigned int speed; /* Operating speed */ - unsigned int vlan; /* VLAN Id */ - unsigned int chip_id; /* PCI table chip id */ - unsigned int rx_coalesce; /* Maximum frames each RxDMAComplete intr */ - unsigned int rx_timeout; /* Wait time between RxDMAComplete intr */ - unsigned int tx_coalesce; /* Maximum frames each tx interrupt */ - unsigned int full_duplex:1; /* Full-duplex operation requested. */ - unsigned int an_enable:2; /* Auto-Negotiated Enable */ - unsigned int jumbo:1; /* Jumbo frame enable */ - unsigned int coalesce:1; /* Rx coalescing enable */ - unsigned int tx_flow:1; /* Tx flow control enable */ - unsigned int rx_flow:1; /* Rx flow control enable */ - unsigned int phy_media:1; /* 1: fiber, 0: copper */ - unsigned int link_status:1; /* Current link status */ - struct netdev_desc *last_tx; /* Last Tx descriptor used. */ - unsigned long cur_rx, old_rx; /* Producer/consumer ring indices */ - unsigned long cur_tx, old_tx; - struct timer_list timer; - int wake_polarity; - char name[256]; /* net device description */ - u8 duplex_polarity; - u16 mcast_filter[4]; - u16 advertising; /* NWay media advertisement */ - u16 negotiate; /* Negotiated media */ - int phy_addr; /* PHY addresses. */ -}; - -/* The station address location in the EEPROM. */ -/* The struct pci_device_id consist of: - vendor, device Vendor and device ID to match (or PCI_ANY_ID) - subvendor, subdevice Subsystem vendor and device ID to match (or PCI_ANY_ID) - class Device class to match. The class_mask tells which bits - class_mask of the class are honored during the comparison. - driver_data Data private to the driver. -*/ - -static DEFINE_PCI_DEVICE_TABLE(rio_pci_tbl) = { - {0x1186, 0x4000, PCI_ANY_ID, PCI_ANY_ID, }, - {0x13f0, 0x1021, PCI_ANY_ID, PCI_ANY_ID, }, - { } -}; -MODULE_DEVICE_TABLE (pci, rio_pci_tbl); -#define TX_TIMEOUT (4*HZ) -#define PACKET_SIZE 1536 -#define MAX_JUMBO 8000 -#define RIO_IO_SIZE 340 -#define DEFAULT_RXC 5 -#define DEFAULT_RXT 750 -#define DEFAULT_TXC 1 -#define MAX_TXC 8 -#endif /* __DL2K_H__ */ diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index fecac79b009b..8007e20972e4 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -18,6 +18,7 @@ source "drivers/net/ethernet/broadcom/Kconfig" source "drivers/net/ethernet/brocade/Kconfig" source "drivers/net/ethernet/chelsio/Kconfig" source "drivers/net/ethernet/cisco/Kconfig" +source "drivers/net/ethernet/dlink/Kconfig" source "drivers/net/ethernet/emulex/Kconfig" source "drivers/net/ethernet/neterion/Kconfig" source "drivers/net/ethernet/faraday/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index 0092c30db18f..22ef3808f439 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/ obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/ obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/ obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/ +obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/ obj-$(CONFIG_NET_VENDOR_EMULEX) += emulex/ obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/ obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/ diff --git a/drivers/net/ethernet/dlink/Kconfig b/drivers/net/ethernet/dlink/Kconfig new file mode 100644 index 000000000000..9fdb66b66f15 --- /dev/null +++ b/drivers/net/ethernet/dlink/Kconfig @@ -0,0 +1,84 @@ +# +# D-Link device configuration +# + +config NET_VENDOR_DLINK + bool "D-Link devices" + depends on PCI || PARPORT + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about D-Link devices. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_DLINK + +config DE600 + tristate "D-Link DE600 pocket adapter support" + depends on PARPORT + ---help--- + This is a network (Ethernet) device which attaches to your parallel + port. Read as well as the + Ethernet-HOWTO, available from + , if you want to use + this. It is possible to have several devices share a single parallel + port and it is safe to compile the corresponding drivers into the + kernel. + + To compile this driver as a module, choose M here: the module + will be called de600. + +config DE620 + tristate "D-Link DE620 pocket adapter support" + depends on PARPORT + ---help--- + This is a network (Ethernet) device which attaches to your parallel + port. Read as well as the + Ethernet-HOWTO, available from + , if you want to use + this. It is possible to have several devices share a single parallel + port and it is safe to compile the corresponding drivers into the + kernel. + + To compile this driver as a module, choose M here: the module + will be called de620. + +config DL2K + tristate "DL2000/TC902x-based Gigabit Ethernet support" + depends on PCI + select CRC32 + ---help--- + This driver supports DL2000/TC902x-based Gigabit ethernet cards, + which includes + D-Link DGE-550T Gigabit Ethernet Adapter. + D-Link DL2000-based Gigabit Ethernet Adapter. + Sundance/Tamarack TC902x Gigabit Ethernet Adapter. + + To compile this driver as a module, choose M here: the + module will be called dl2k. + +config SUNDANCE + tristate "Sundance Alta support" + depends on PCI + select CRC32 + select MII + ---help--- + This driver is for the Sundance "Alta" chip. + More specific information and updates are available from + . + +config SUNDANCE_MMIO + bool "Use MMIO instead of PIO" + depends on SUNDANCE + ---help--- + Enable memory-mapped I/O for interaction with Sundance NIC registers. + Do NOT enable this by default, PIO (enabled when MMIO is disabled) + is known to solve bugs on certain chips. + + If unsure, say N. + +endif # NET_VENDOR_DLINK diff --git a/drivers/net/ethernet/dlink/Makefile b/drivers/net/ethernet/dlink/Makefile new file mode 100644 index 000000000000..c705eaa4f5b2 --- /dev/null +++ b/drivers/net/ethernet/dlink/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the D-Link network device drivers. +# + +obj-$(CONFIG_DE600) += de600.o +obj-$(CONFIG_DE620) += de620.o +obj-$(CONFIG_DL2K) += dl2k.o +obj-$(CONFIG_SUNDANCE) += sundance.o diff --git a/drivers/net/ethernet/dlink/de600.c b/drivers/net/ethernet/dlink/de600.c new file mode 100644 index 000000000000..23a65398d011 --- /dev/null +++ b/drivers/net/ethernet/dlink/de600.c @@ -0,0 +1,530 @@ +static const char version[] = "de600.c: $Revision: 1.41-2.5 $, Bjorn Ekwall (bj0rn@blox.se)\n"; +/* + * de600.c + * + * Linux driver for the D-Link DE-600 Ethernet pocket adapter. + * + * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall + * The Author may be reached as bj0rn@blox.se + * + * Based on adapter information gathered from DE600.ASM by D-Link Inc., + * as included on disk C in the v.2.11 of PC/TCP from FTP Software. + * For DE600.asm: + * Portions (C) Copyright 1990 D-Link, Inc. + * Copyright, 1988-1992, Russell Nelson, Crynwr Software + * + * Adapted to the sample network driver core for linux, + * written by: Donald Becker + * (Now at ) + * + **************************************************************/ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + **************************************************************/ + +/* Add more time here if your adapter won't work OK: */ +#define DE600_SLOW_DOWN udelay(delay_time) + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "de600.h" + +static unsigned int check_lost = 1; +module_param(check_lost, bool, 0); +MODULE_PARM_DESC(check_lost, "If set then check for unplugged de600"); + +static unsigned int delay_time = 10; +module_param(delay_time, int, 0); +MODULE_PARM_DESC(delay_time, "DE-600 deley on I/O in microseconds"); + + +/* + * D-Link driver variables: + */ + +static volatile int rx_page; + +#define TX_PAGES 2 +static volatile int tx_fifo[TX_PAGES]; +static volatile int tx_fifo_in; +static volatile int tx_fifo_out; +static volatile int free_tx_pages = TX_PAGES; +static int was_down; +static DEFINE_SPINLOCK(de600_lock); + +static inline u8 de600_read_status(struct net_device *dev) +{ + u8 status; + + outb_p(STATUS, DATA_PORT); + status = inb(STATUS_PORT); + outb_p(NULL_COMMAND | HI_NIBBLE, DATA_PORT); + + return status; +} + +static inline u8 de600_read_byte(unsigned char type, struct net_device *dev) +{ + /* dev used by macros */ + u8 lo; + outb_p((type), DATA_PORT); + lo = ((unsigned char)inb(STATUS_PORT)) >> 4; + outb_p((type) | HI_NIBBLE, DATA_PORT); + return ((unsigned char)inb(STATUS_PORT) & (unsigned char)0xf0) | lo; +} + +/* + * Open/initialize the board. This is called (in the current kernel) + * after booting when 'ifconfig name> $IP_ADDR' is run (in rc.inet1). + * + * This routine should set everything up anew at each open, even + * registers that "should" only need to be set once at boot, so that + * there is a non-reboot way to recover if something goes wrong. + */ + +static int de600_open(struct net_device *dev) +{ + unsigned long flags; + int ret = request_irq(DE600_IRQ, de600_interrupt, 0, dev->name, dev); + if (ret) { + printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, DE600_IRQ); + return ret; + } + spin_lock_irqsave(&de600_lock, flags); + ret = adapter_init(dev); + spin_unlock_irqrestore(&de600_lock, flags); + return ret; +} + +/* + * The inverse routine to de600_open(). + */ + +static int de600_close(struct net_device *dev) +{ + select_nic(); + rx_page = 0; + de600_put_command(RESET); + de600_put_command(STOP_RESET); + de600_put_command(0); + select_prn(); + free_irq(DE600_IRQ, dev); + return 0; +} + +static inline void trigger_interrupt(struct net_device *dev) +{ + de600_put_command(FLIP_IRQ); + select_prn(); + DE600_SLOW_DOWN; + select_nic(); + de600_put_command(0); +} + +/* + * Copy a buffer to the adapter transmit page memory. + * Start sending. + */ + +static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long flags; + int transmit_from; + int len; + int tickssofar; + u8 *buffer = skb->data; + int i; + + if (free_tx_pages <= 0) { /* Do timeouts, to avoid hangs. */ + tickssofar = jiffies - dev_trans_start(dev); + if (tickssofar < HZ/20) + return NETDEV_TX_BUSY; + /* else */ + printk(KERN_WARNING "%s: transmit timed out (%d), %s?\n", dev->name, tickssofar, "network cable problem"); + /* Restart the adapter. */ + spin_lock_irqsave(&de600_lock, flags); + if (adapter_init(dev)) { + spin_unlock_irqrestore(&de600_lock, flags); + return NETDEV_TX_BUSY; + } + spin_unlock_irqrestore(&de600_lock, flags); + } + + /* Start real output */ + pr_debug("de600_start_xmit:len=%d, page %d/%d\n", skb->len, tx_fifo_in, free_tx_pages); + + if ((len = skb->len) < RUNT) + len = RUNT; + + spin_lock_irqsave(&de600_lock, flags); + select_nic(); + tx_fifo[tx_fifo_in] = transmit_from = tx_page_adr(tx_fifo_in) - len; + tx_fifo_in = (tx_fifo_in + 1) % TX_PAGES; /* Next free tx page */ + + if(check_lost) + { + /* This costs about 40 instructions per packet... */ + de600_setup_address(NODE_ADDRESS, RW_ADDR); + de600_read_byte(READ_DATA, dev); + if (was_down || (de600_read_byte(READ_DATA, dev) != 0xde)) { + if (adapter_init(dev)) { + spin_unlock_irqrestore(&de600_lock, flags); + return NETDEV_TX_BUSY; + } + } + } + + de600_setup_address(transmit_from, RW_ADDR); + for (i = 0; i < skb->len ; ++i, ++buffer) + de600_put_byte(*buffer); + for (; i < len; ++i) + de600_put_byte(0); + + if (free_tx_pages-- == TX_PAGES) { /* No transmission going on */ + dev->trans_start = jiffies; + netif_start_queue(dev); /* allow more packets into adapter */ + /* Send page and generate a faked interrupt */ + de600_setup_address(transmit_from, TX_ADDR); + de600_put_command(TX_ENABLE); + } + else { + if (free_tx_pages) + netif_start_queue(dev); + else + netif_stop_queue(dev); + select_prn(); + } + spin_unlock_irqrestore(&de600_lock, flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; +} + +/* + * The typical workload of the driver: + * Handle the network interface interrupts. + */ + +static irqreturn_t de600_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + u8 irq_status; + int retrig = 0; + int boguscount = 0; + + spin_lock(&de600_lock); + + select_nic(); + irq_status = de600_read_status(dev); + + do { + pr_debug("de600_interrupt (%02X)\n", irq_status); + + if (irq_status & RX_GOOD) + de600_rx_intr(dev); + else if (!(irq_status & RX_BUSY)) + de600_put_command(RX_ENABLE); + + /* Any transmission in progress? */ + if (free_tx_pages < TX_PAGES) + retrig = de600_tx_intr(dev, irq_status); + else + retrig = 0; + + irq_status = de600_read_status(dev); + } while ( (irq_status & RX_GOOD) || ((++boguscount < 100) && retrig) ); + /* + * Yeah, it _looks_ like busy waiting, smells like busy waiting + * and I know it's not PC, but please, it will only occur once + * in a while and then only for a loop or so (< 1ms for sure!) + */ + + /* Enable adapter interrupts */ + select_prn(); + if (retrig) + trigger_interrupt(dev); + spin_unlock(&de600_lock); + return IRQ_HANDLED; +} + +static int de600_tx_intr(struct net_device *dev, int irq_status) +{ + /* + * Returns 1 if tx still not done + */ + + /* Check if current transmission is done yet */ + if (irq_status & TX_BUSY) + return 1; /* tx not done, try again */ + + /* else */ + /* If last transmission OK then bump fifo index */ + if (!(irq_status & TX_FAILED16)) { + tx_fifo_out = (tx_fifo_out + 1) % TX_PAGES; + ++free_tx_pages; + dev->stats.tx_packets++; + netif_wake_queue(dev); + } + + /* More to send, or resend last packet? */ + if ((free_tx_pages < TX_PAGES) || (irq_status & TX_FAILED16)) { + dev->trans_start = jiffies; + de600_setup_address(tx_fifo[tx_fifo_out], TX_ADDR); + de600_put_command(TX_ENABLE); + return 1; + } + /* else */ + + return 0; +} + +/* + * We have a good packet, get it out of the adapter. + */ +static void de600_rx_intr(struct net_device *dev) +{ + struct sk_buff *skb; + int i; + int read_from; + int size; + unsigned char *buffer; + + /* Get size of received packet */ + size = de600_read_byte(RX_LEN, dev); /* low byte */ + size += (de600_read_byte(RX_LEN, dev) << 8); /* high byte */ + size -= 4; /* Ignore trailing 4 CRC-bytes */ + + /* Tell adapter where to store next incoming packet, enable receiver */ + read_from = rx_page_adr(); + next_rx_page(); + de600_put_command(RX_ENABLE); + + if ((size < 32) || (size > 1535)) { + printk(KERN_WARNING "%s: Bogus packet size %d.\n", dev->name, size); + if (size > 10000) + adapter_init(dev); + return; + } + + skb = dev_alloc_skb(size+2); + if (skb == NULL) { + printk("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size); + return; + } + /* else */ + + skb_reserve(skb,2); /* Align */ + + /* 'skb->data' points to the start of sk_buff data area. */ + buffer = skb_put(skb,size); + + /* copy the packet into the buffer */ + de600_setup_address(read_from, RW_ADDR); + for (i = size; i > 0; --i, ++buffer) + *buffer = de600_read_byte(READ_DATA, dev); + + skb->protocol=eth_type_trans(skb,dev); + + netif_rx(skb); + + /* update stats */ + dev->stats.rx_packets++; /* count all receives */ + dev->stats.rx_bytes += size; /* count all received bytes */ + + /* + * If any worth-while packets have been received, netif_rx() + * will work on them when we get to the tasklets. + */ +} + +static const struct net_device_ops de600_netdev_ops = { + .ndo_open = de600_open, + .ndo_stop = de600_close, + .ndo_start_xmit = de600_start_xmit, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + + +static struct net_device * __init de600_probe(void) +{ + int i; + struct net_device *dev; + int err; + + dev = alloc_etherdev(0); + if (!dev) + return ERR_PTR(-ENOMEM); + + + if (!request_region(DE600_IO, 3, "de600")) { + printk(KERN_WARNING "DE600: port 0x%x busy\n", DE600_IO); + err = -EBUSY; + goto out; + } + + printk(KERN_INFO "%s: D-Link DE-600 pocket adapter", dev->name); + /* Alpha testers must have the version number to report bugs. */ + pr_debug("%s", version); + + /* probe for adapter */ + err = -ENODEV; + rx_page = 0; + select_nic(); + (void)de600_read_status(dev); + de600_put_command(RESET); + de600_put_command(STOP_RESET); + if (de600_read_status(dev) & 0xf0) { + printk(": not at I/O %#3x.\n", DATA_PORT); + goto out1; + } + + /* + * Maybe we found one, + * have to check if it is a D-Link DE-600 adapter... + */ + + /* Get the adapter ethernet address from the ROM */ + de600_setup_address(NODE_ADDRESS, RW_ADDR); + for (i = 0; i < ETH_ALEN; i++) { + dev->dev_addr[i] = de600_read_byte(READ_DATA, dev); + dev->broadcast[i] = 0xff; + } + + /* Check magic code */ + if ((dev->dev_addr[1] == 0xde) && (dev->dev_addr[2] == 0x15)) { + /* OK, install real address */ + dev->dev_addr[0] = 0x00; + dev->dev_addr[1] = 0x80; + dev->dev_addr[2] = 0xc8; + dev->dev_addr[3] &= 0x0f; + dev->dev_addr[3] |= 0x70; + } else { + printk(" not identified in the printer port\n"); + goto out1; + } + + printk(", Ethernet Address: %pM\n", dev->dev_addr); + + dev->netdev_ops = &de600_netdev_ops; + + dev->flags&=~IFF_MULTICAST; + + select_prn(); + + err = register_netdev(dev); + if (err) + goto out1; + + return dev; + +out1: + release_region(DE600_IO, 3); +out: + free_netdev(dev); + return ERR_PTR(err); +} + +static int adapter_init(struct net_device *dev) +{ + int i; + + select_nic(); + rx_page = 0; /* used by RESET */ + de600_put_command(RESET); + de600_put_command(STOP_RESET); + + /* Check if it is still there... */ + /* Get the some bytes of the adapter ethernet address from the ROM */ + de600_setup_address(NODE_ADDRESS, RW_ADDR); + de600_read_byte(READ_DATA, dev); + if ((de600_read_byte(READ_DATA, dev) != 0xde) || + (de600_read_byte(READ_DATA, dev) != 0x15)) { + /* was: if (de600_read_status(dev) & 0xf0) { */ + printk("Something has happened to the DE-600! Please check it and do a new ifconfig!\n"); + /* Goodbye, cruel world... */ + dev->flags &= ~IFF_UP; + de600_close(dev); + was_down = 1; + netif_stop_queue(dev); /* Transmit busy... */ + return 1; /* failed */ + } + + if (was_down) { + printk(KERN_INFO "%s: Thanks, I feel much better now!\n", dev->name); + was_down = 0; + } + + tx_fifo_in = 0; + tx_fifo_out = 0; + free_tx_pages = TX_PAGES; + + + /* set the ether address. */ + de600_setup_address(NODE_ADDRESS, RW_ADDR); + for (i = 0; i < ETH_ALEN; i++) + de600_put_byte(dev->dev_addr[i]); + + /* where to start saving incoming packets */ + rx_page = RX_BP | RX_BASE_PAGE; + de600_setup_address(MEM_4K, RW_ADDR); + /* Enable receiver */ + de600_put_command(RX_ENABLE); + select_prn(); + + netif_start_queue(dev); + + return 0; /* OK */ +} + +static struct net_device *de600_dev; + +static int __init de600_init(void) +{ + de600_dev = de600_probe(); + if (IS_ERR(de600_dev)) + return PTR_ERR(de600_dev); + return 0; +} + +static void __exit de600_exit(void) +{ + unregister_netdev(de600_dev); + release_region(DE600_IO, 3); + free_netdev(de600_dev); +} + +module_init(de600_init); +module_exit(de600_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/dlink/de600.h b/drivers/net/ethernet/dlink/de600.h new file mode 100644 index 000000000000..e80ecbabcf4e --- /dev/null +++ b/drivers/net/ethernet/dlink/de600.h @@ -0,0 +1,168 @@ +/************************************************** + * * + * Definition of D-Link Ethernet Pocket adapter * + * * + **************************************************/ +/* + * D-Link Ethernet pocket adapter ports + */ +/* + * OK, so I'm cheating, but there are an awful lot of + * reads and writes in order to get anything in and out + * of the DE-600 with 4 bits at a time in the parallel port, + * so every saved instruction really helps :-) + */ + +#ifndef DE600_IO +#define DE600_IO 0x378 +#endif + +#define DATA_PORT (DE600_IO) +#define STATUS_PORT (DE600_IO + 1) +#define COMMAND_PORT (DE600_IO + 2) + +#ifndef DE600_IRQ +#define DE600_IRQ 7 +#endif +/* + * It really should look like this, and autoprobing as well... + * +#define DATA_PORT (dev->base_addr + 0) +#define STATUS_PORT (dev->base_addr + 1) +#define COMMAND_PORT (dev->base_addr + 2) +#define DE600_IRQ dev->irq + */ + +/* + * D-Link COMMAND_PORT commands + */ +#define SELECT_NIC 0x04 /* select Network Interface Card */ +#define SELECT_PRN 0x1c /* select Printer */ +#define NML_PRN 0xec /* normal Printer situation */ +#define IRQEN 0x10 /* enable IRQ line */ + +/* + * D-Link STATUS_PORT + */ +#define RX_BUSY 0x80 +#define RX_GOOD 0x40 +#define TX_FAILED16 0x10 +#define TX_BUSY 0x08 + +/* + * D-Link DATA_PORT commands + * command in low 4 bits + * data in high 4 bits + * select current data nibble with HI_NIBBLE bit + */ +#define WRITE_DATA 0x00 /* write memory */ +#define READ_DATA 0x01 /* read memory */ +#define STATUS 0x02 /* read status register */ +#define COMMAND 0x03 /* write command register (see COMMAND below) */ +#define NULL_COMMAND 0x04 /* null command */ +#define RX_LEN 0x05 /* read received packet length */ +#define TX_ADDR 0x06 /* set adapter transmit memory address */ +#define RW_ADDR 0x07 /* set adapter read/write memory address */ +#define HI_NIBBLE 0x08 /* read/write the high nibble of data, + or-ed with rest of command */ + +/* + * command register, accessed through DATA_PORT with low bits = COMMAND + */ +#define RX_ALL 0x01 /* PROMISCUOUS */ +#define RX_BP 0x02 /* default: BROADCAST & PHYSICAL ADDRESS */ +#define RX_MBP 0x03 /* MULTICAST, BROADCAST & PHYSICAL ADDRESS */ + +#define TX_ENABLE 0x04 /* bit 2 */ +#define RX_ENABLE 0x08 /* bit 3 */ + +#define RESET 0x80 /* set bit 7 high */ +#define STOP_RESET 0x00 /* set bit 7 low */ + +/* + * data to command register + * (high 4 bits in write to DATA_PORT) + */ +#define RX_PAGE2_SELECT 0x10 /* bit 4, only 2 pages to select */ +#define RX_BASE_PAGE 0x20 /* bit 5, always set when specifying RX_ADDR */ +#define FLIP_IRQ 0x40 /* bit 6 */ + +/* + * D-Link adapter internal memory: + * + * 0-2K 1:st transmit page (send from pointer up to 2K) + * 2-4K 2:nd transmit page (send from pointer up to 4K) + * + * 4-6K 1:st receive page (data from 4K upwards) + * 6-8K 2:nd receive page (data from 6K upwards) + * + * 8K+ Adapter ROM (contains magic code and last 3 bytes of Ethernet address) + */ +#define MEM_2K 0x0800 /* 2048 */ +#define MEM_4K 0x1000 /* 4096 */ +#define MEM_6K 0x1800 /* 6144 */ +#define NODE_ADDRESS 0x2000 /* 8192 */ + +#define RUNT 60 /* Too small Ethernet packet */ + +/************************************************** + * * + * End of definition * + * * + **************************************************/ + +/* + * Index to functions, as function prototypes. + */ +/* Routines used internally. (See "convenience macros") */ +static u8 de600_read_status(struct net_device *dev); +static u8 de600_read_byte(unsigned char type, struct net_device *dev); + +/* Put in the device structure. */ +static int de600_open(struct net_device *dev); +static int de600_close(struct net_device *dev); +static int de600_start_xmit(struct sk_buff *skb, struct net_device *dev); + +/* Dispatch from interrupts. */ +static irqreturn_t de600_interrupt(int irq, void *dev_id); +static int de600_tx_intr(struct net_device *dev, int irq_status); +static void de600_rx_intr(struct net_device *dev); + +/* Initialization */ +static void trigger_interrupt(struct net_device *dev); +static int adapter_init(struct net_device *dev); + +/* + * Convenience macros/functions for D-Link adapter + */ + +#define select_prn() outb_p(SELECT_PRN, COMMAND_PORT); DE600_SLOW_DOWN +#define select_nic() outb_p(SELECT_NIC, COMMAND_PORT); DE600_SLOW_DOWN + +/* Thanks for hints from Mark Burton */ +#define de600_put_byte(data) ( \ + outb_p(((data) << 4) | WRITE_DATA , DATA_PORT), \ + outb_p(((data) & 0xf0) | WRITE_DATA | HI_NIBBLE, DATA_PORT)) + +/* + * The first two outb_p()'s below could perhaps be deleted if there + * would be more delay in the last two. Not certain about it yet... + */ +#define de600_put_command(cmd) ( \ + outb_p(( rx_page << 4) | COMMAND , DATA_PORT), \ + outb_p(( rx_page & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT), \ + outb_p(((rx_page | cmd) << 4) | COMMAND , DATA_PORT), \ + outb_p(((rx_page | cmd) & 0xf0) | COMMAND | HI_NIBBLE, DATA_PORT)) + +#define de600_setup_address(addr,type) ( \ + outb_p((((addr) << 4) & 0xf0) | type , DATA_PORT), \ + outb_p(( (addr) & 0xf0) | type | HI_NIBBLE, DATA_PORT), \ + outb_p((((addr) >> 4) & 0xf0) | type , DATA_PORT), \ + outb_p((((addr) >> 8) & 0xf0) | type | HI_NIBBLE, DATA_PORT)) + +#define rx_page_adr() ((rx_page & RX_PAGE2_SELECT)?(MEM_6K):(MEM_4K)) + +/* Flip bit, only 2 pages */ +#define next_rx_page() (rx_page ^= RX_PAGE2_SELECT) + +#define tx_page_adr(a) (((a) + 1) * MEM_2K) diff --git a/drivers/net/ethernet/dlink/de620.c b/drivers/net/ethernet/dlink/de620.c new file mode 100644 index 000000000000..1c51a7576119 --- /dev/null +++ b/drivers/net/ethernet/dlink/de620.c @@ -0,0 +1,988 @@ +/* + * de620.c $Revision: 1.40 $ BETA + * + * + * Linux driver for the D-Link DE-620 Ethernet pocket adapter. + * + * Portions (C) Copyright 1993, 1994 by Bjorn Ekwall + * + * Based on adapter information gathered from DOS packetdriver + * sources from D-Link Inc: (Special thanks to Henry Ngai of D-Link.) + * Portions (C) Copyright D-Link SYSTEM Inc. 1991, 1992 + * Copyright, 1988, Russell Nelson, Crynwr Software + * + * Adapted to the sample network driver core for linux, + * written by: Donald Becker + * (Now at ) + * + * Valuable assistance from: + * J. Joshua Kopper + * Olav Kvittem + * Germano Caronni + * Jeremy Fitzhardinge + * + *****************************************************************************/ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + *****************************************************************************/ +static const char version[] = + "de620.c: $Revision: 1.40 $, Bjorn Ekwall \n"; + +/*********************************************************************** + * + * "Tuning" section. + * + * Compile-time options: (see below for descriptions) + * -DDE620_IO=0x378 (lpt1) + * -DDE620_IRQ=7 (lpt1) + * -DSHUTDOWN_WHEN_LOST + * -DCOUNT_LOOPS + * -DLOWSPEED + * -DREAD_DELAY + * -DWRITE_DELAY + */ + +/* + * This driver assumes that the printer port is a "normal", + * dumb, uni-directional port! + * If your port is "fancy" in any way, please try to set it to "normal" + * with your BIOS setup. I have no access to machines with bi-directional + * ports, so I can't test such a driver :-( + * (Yes, I _know_ it is possible to use DE620 with bidirectional ports...) + * + * There are some clones of DE620 out there, with different names. + * If the current driver does not recognize a clone, try to change + * the following #define to: + * + * #define DE620_CLONE 1 + */ +#define DE620_CLONE 0 + +/* + * If the adapter has problems with high speeds, enable this #define + * otherwise full printerport speed will be attempted. + * + * You can tune the READ_DELAY/WRITE_DELAY below if you enable LOWSPEED + * +#define LOWSPEED + */ + +#ifndef READ_DELAY +#define READ_DELAY 100 /* adapter internal read delay in 100ns units */ +#endif + +#ifndef WRITE_DELAY +#define WRITE_DELAY 100 /* adapter internal write delay in 100ns units */ +#endif + +/* + * Enable this #define if you want the adapter to do a "ifconfig down" on + * itself when we have detected that something is possibly wrong with it. + * The default behaviour is to retry with "adapter_init()" until success. + * This should be used for debugging purposes only. + * +#define SHUTDOWN_WHEN_LOST + */ + +#ifdef LOWSPEED +/* + * Enable this #define if you want to see debugging output that show how long + * we have to wait before the DE-620 is ready for the next read/write/command. + * +#define COUNT_LOOPS + */ +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +/* Constant definitions for the DE-620 registers, commands and bits */ +#include "de620.h" + +typedef unsigned char byte; + +/******************************************************* + * * + * Definition of D-Link DE-620 Ethernet Pocket adapter * + * See also "de620.h" * + * * + *******************************************************/ +#ifndef DE620_IO /* Compile-time configurable */ +#define DE620_IO 0x378 +#endif + +#ifndef DE620_IRQ /* Compile-time configurable */ +#define DE620_IRQ 7 +#endif + +#define DATA_PORT (dev->base_addr) +#define STATUS_PORT (dev->base_addr + 1) +#define COMMAND_PORT (dev->base_addr + 2) + +#define RUNT 60 /* Too small Ethernet packet */ +#define GIANT 1514 /* largest legal size packet, no fcs */ + +/* + * Force media with insmod: + * insmod de620.o bnc=1 + * or + * insmod de620.o utp=1 + * + * Force io and/or irq with insmod: + * insmod de620.o io=0x378 irq=7 + * + * Make a clone skip the Ethernet-address range check: + * insmod de620.o clone=1 + */ +static int bnc; +static int utp; +static int io = DE620_IO; +static int irq = DE620_IRQ; +static int clone = DE620_CLONE; + +static spinlock_t de620_lock; + +module_param(bnc, int, 0); +module_param(utp, int, 0); +module_param(io, int, 0); +module_param(irq, int, 0); +module_param(clone, int, 0); +MODULE_PARM_DESC(bnc, "DE-620 set BNC medium (0-1)"); +MODULE_PARM_DESC(utp, "DE-620 set UTP medium (0-1)"); +MODULE_PARM_DESC(io, "DE-620 I/O base address,required"); +MODULE_PARM_DESC(irq, "DE-620 IRQ number,required"); +MODULE_PARM_DESC(clone, "Check also for non-D-Link DE-620 clones (0-1)"); + +/*********************************************** + * * + * Index to functions, as function prototypes. * + * * + ***********************************************/ + +/* + * Routines used internally. (See also "convenience macros.. below") + */ + +/* Put in the device structure. */ +static int de620_open(struct net_device *); +static int de620_close(struct net_device *); +static void de620_set_multicast_list(struct net_device *); +static int de620_start_xmit(struct sk_buff *, struct net_device *); + +/* Dispatch from interrupts. */ +static irqreturn_t de620_interrupt(int, void *); +static int de620_rx_intr(struct net_device *); + +/* Initialization */ +static int adapter_init(struct net_device *); +static int read_eeprom(struct net_device *); + + +/* + * D-Link driver variables: + */ +#define SCR_DEF NIBBLEMODE |INTON | SLEEP | AUTOTX +#define TCR_DEF RXPB /* not used: | TXSUCINT | T16INT */ +#define DE620_RX_START_PAGE 12 /* 12 pages (=3k) reserved for tx */ +#define DEF_NIC_CMD IRQEN | ICEN | DS1 + +static volatile byte NIC_Cmd; +static volatile byte next_rx_page; +static byte first_rx_page; +static byte last_rx_page; +static byte EIPRegister; + +static struct nic { + byte NodeID[6]; + byte RAM_Size; + byte Model; + byte Media; + byte SCR; +} nic_data; + +/********************************************************** + * * + * Convenience macros/functions for D-Link DE-620 adapter * + * * + **********************************************************/ +#define de620_tx_buffs(dd) (inb(STATUS_PORT) & (TXBF0 | TXBF1)) +#define de620_flip_ds(dd) NIC_Cmd ^= DS0 | DS1; outb(NIC_Cmd, COMMAND_PORT); + +/* Check for ready-status, and return a nibble (high 4 bits) for data input */ +#ifdef COUNT_LOOPS +static int tot_cnt; +#endif +static inline byte +de620_ready(struct net_device *dev) +{ + byte value; + register short int cnt = 0; + + while ((((value = inb(STATUS_PORT)) & READY) == 0) && (cnt <= 1000)) + ++cnt; + +#ifdef COUNT_LOOPS + tot_cnt += cnt; +#endif + return value & 0xf0; /* nibble */ +} + +static inline void +de620_send_command(struct net_device *dev, byte cmd) +{ + de620_ready(dev); + if (cmd == W_DUMMY) + outb(NIC_Cmd, COMMAND_PORT); + + outb(cmd, DATA_PORT); + + outb(NIC_Cmd ^ CS0, COMMAND_PORT); + de620_ready(dev); + outb(NIC_Cmd, COMMAND_PORT); +} + +static inline void +de620_put_byte(struct net_device *dev, byte value) +{ + /* The de620_ready() makes 7 loops, on the average, on a DX2/66 */ + de620_ready(dev); + outb(value, DATA_PORT); + de620_flip_ds(dev); +} + +static inline byte +de620_read_byte(struct net_device *dev) +{ + byte value; + + /* The de620_ready() makes 7 loops, on the average, on a DX2/66 */ + value = de620_ready(dev); /* High nibble */ + de620_flip_ds(dev); + value |= de620_ready(dev) >> 4; /* Low nibble */ + return value; +} + +static inline void +de620_write_block(struct net_device *dev, byte *buffer, int count, int pad) +{ +#ifndef LOWSPEED + byte uflip = NIC_Cmd ^ (DS0 | DS1); + byte dflip = NIC_Cmd; +#else /* LOWSPEED */ +#ifdef COUNT_LOOPS + int bytes = count; +#endif /* COUNT_LOOPS */ +#endif /* LOWSPEED */ + +#ifdef LOWSPEED +#ifdef COUNT_LOOPS + tot_cnt = 0; +#endif /* COUNT_LOOPS */ + /* No further optimization useful, the limit is in the adapter. */ + for ( ; count > 0; --count, ++buffer) { + de620_put_byte(dev,*buffer); + } + for ( count = pad ; count > 0; --count, ++buffer) { + de620_put_byte(dev, 0); + } + de620_send_command(dev,W_DUMMY); +#ifdef COUNT_LOOPS + /* trial debug output: loops per byte in de620_ready() */ + printk("WRITE(%d)\n", tot_cnt/((bytes?bytes:1))); +#endif /* COUNT_LOOPS */ +#else /* not LOWSPEED */ + for ( ; count > 0; count -=2) { + outb(*buffer++, DATA_PORT); + outb(uflip, COMMAND_PORT); + outb(*buffer++, DATA_PORT); + outb(dflip, COMMAND_PORT); + } + de620_send_command(dev,W_DUMMY); +#endif /* LOWSPEED */ +} + +static inline void +de620_read_block(struct net_device *dev, byte *data, int count) +{ +#ifndef LOWSPEED + byte value; + byte uflip = NIC_Cmd ^ (DS0 | DS1); + byte dflip = NIC_Cmd; +#else /* LOWSPEED */ +#ifdef COUNT_LOOPS + int bytes = count; + + tot_cnt = 0; +#endif /* COUNT_LOOPS */ +#endif /* LOWSPEED */ + +#ifdef LOWSPEED + /* No further optimization useful, the limit is in the adapter. */ + while (count-- > 0) { + *data++ = de620_read_byte(dev); + de620_flip_ds(dev); + } +#ifdef COUNT_LOOPS + /* trial debug output: loops per byte in de620_ready() */ + printk("READ(%d)\n", tot_cnt/(2*(bytes?bytes:1))); +#endif /* COUNT_LOOPS */ +#else /* not LOWSPEED */ + while (count-- > 0) { + value = inb(STATUS_PORT) & 0xf0; /* High nibble */ + outb(uflip, COMMAND_PORT); + *data++ = value | inb(STATUS_PORT) >> 4; /* Low nibble */ + outb(dflip , COMMAND_PORT); + } +#endif /* LOWSPEED */ +} + +static inline void +de620_set_delay(struct net_device *dev) +{ + de620_ready(dev); + outb(W_DFR, DATA_PORT); + outb(NIC_Cmd ^ CS0, COMMAND_PORT); + + de620_ready(dev); +#ifdef LOWSPEED + outb(WRITE_DELAY, DATA_PORT); +#else + outb(0, DATA_PORT); +#endif + de620_flip_ds(dev); + + de620_ready(dev); +#ifdef LOWSPEED + outb(READ_DELAY, DATA_PORT); +#else + outb(0, DATA_PORT); +#endif + de620_flip_ds(dev); +} + +static inline void +de620_set_register(struct net_device *dev, byte reg, byte value) +{ + de620_ready(dev); + outb(reg, DATA_PORT); + outb(NIC_Cmd ^ CS0, COMMAND_PORT); + + de620_put_byte(dev, value); +} + +static inline byte +de620_get_register(struct net_device *dev, byte reg) +{ + byte value; + + de620_send_command(dev,reg); + value = de620_read_byte(dev); + de620_send_command(dev,W_DUMMY); + + return value; +} + +/********************************************************************* + * + * Open/initialize the board. + * + * This routine should set everything up anew at each open, even + * registers that "should" only need to be set once at boot, so that + * there is a non-reboot way to recover if something goes wrong. + * + */ +static int de620_open(struct net_device *dev) +{ + int ret = request_irq(dev->irq, de620_interrupt, 0, dev->name, dev); + if (ret) { + printk (KERN_ERR "%s: unable to get IRQ %d\n", dev->name, dev->irq); + return ret; + } + + if (adapter_init(dev)) { + ret = -EIO; + goto out_free_irq; + } + + netif_start_queue(dev); + return 0; + +out_free_irq: + free_irq(dev->irq, dev); + return ret; +} + +/************************************************ + * + * The inverse routine to de620_open(). + * + */ + +static int de620_close(struct net_device *dev) +{ + netif_stop_queue(dev); + /* disable recv */ + de620_set_register(dev, W_TCR, RXOFF); + free_irq(dev->irq, dev); + return 0; +} + +/********************************************* + * + * Set or clear the multicast filter for this adaptor. + * (no real multicast implemented for the DE-620, but she can be promiscuous...) + * + */ + +static void de620_set_multicast_list(struct net_device *dev) +{ + if (!netdev_mc_empty(dev) || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) + { /* Enable promiscuous mode */ + de620_set_register(dev, W_TCR, (TCR_DEF & ~RXPBM) | RXALL); + } + else + { /* Disable promiscuous mode, use normal mode */ + de620_set_register(dev, W_TCR, TCR_DEF); + } +} + +/******************************************************* + * + * Handle timeouts on transmit + */ + +static void de620_timeout(struct net_device *dev) +{ + printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, "network cable problem"); + /* Restart the adapter. */ + if (!adapter_init(dev)) /* maybe close it */ + netif_wake_queue(dev); +} + +/******************************************************* + * + * Copy a buffer to the adapter transmit page memory. + * Start sending. + */ +static int de620_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long flags; + int len; + byte *buffer = skb->data; + byte using_txbuf; + + using_txbuf = de620_tx_buffs(dev); /* Peek at the adapter */ + + netif_stop_queue(dev); + + + if ((len = skb->len) < RUNT) + len = RUNT; + if (len & 1) /* send an even number of bytes */ + ++len; + + /* Start real output */ + + spin_lock_irqsave(&de620_lock, flags); + pr_debug("de620_start_xmit: len=%d, bufs 0x%02x\n", + (int)skb->len, using_txbuf); + + /* select a free tx buffer. if there is one... */ + switch (using_txbuf) { + default: /* both are free: use TXBF0 */ + case TXBF1: /* use TXBF0 */ + de620_send_command(dev,W_CR | RW0); + using_txbuf |= TXBF0; + break; + + case TXBF0: /* use TXBF1 */ + de620_send_command(dev,W_CR | RW1); + using_txbuf |= TXBF1; + break; + + case (TXBF0 | TXBF1): /* NONE!!! */ + printk(KERN_WARNING "%s: No tx-buffer available!\n", dev->name); + spin_unlock_irqrestore(&de620_lock, flags); + return NETDEV_TX_BUSY; + } + de620_write_block(dev, buffer, skb->len, len-skb->len); + + if(!(using_txbuf == (TXBF0 | TXBF1))) + netif_wake_queue(dev); + + dev->stats.tx_packets++; + spin_unlock_irqrestore(&de620_lock, flags); + dev_kfree_skb (skb); + return NETDEV_TX_OK; +} + +/***************************************************** + * + * Handle the network interface interrupts. + * + */ +static irqreturn_t +de620_interrupt(int irq_in, void *dev_id) +{ + struct net_device *dev = dev_id; + byte irq_status; + int bogus_count = 0; + int again = 0; + + spin_lock(&de620_lock); + + /* Read the status register (_not_ the status port) */ + irq_status = de620_get_register(dev, R_STS); + + pr_debug("de620_interrupt (%2.2X)\n", irq_status); + + if (irq_status & RXGOOD) { + do { + again = de620_rx_intr(dev); + pr_debug("again=%d\n", again); + } + while (again && (++bogus_count < 100)); + } + + if(de620_tx_buffs(dev) != (TXBF0 | TXBF1)) + netif_wake_queue(dev); + + spin_unlock(&de620_lock); + return IRQ_HANDLED; +} + +/************************************** + * + * Get a packet from the adapter + * + * Send it "upstairs" + * + */ +static int de620_rx_intr(struct net_device *dev) +{ + struct header_buf { + byte status; + byte Rx_NextPage; + unsigned short Rx_ByteCount; + } header_buf; + struct sk_buff *skb; + int size; + byte *buffer; + byte pagelink; + byte curr_page; + + pr_debug("de620_rx_intr: next_rx_page = %d\n", next_rx_page); + + /* Tell the adapter that we are going to read data, and from where */ + de620_send_command(dev, W_CR | RRN); + de620_set_register(dev, W_RSA1, next_rx_page); + de620_set_register(dev, W_RSA0, 0); + + /* Deep breath, and away we goooooo */ + de620_read_block(dev, (byte *)&header_buf, sizeof(struct header_buf)); + pr_debug("page status=0x%02x, nextpage=%d, packetsize=%d\n", + header_buf.status, header_buf.Rx_NextPage, + header_buf.Rx_ByteCount); + + /* Plausible page header? */ + pagelink = header_buf.Rx_NextPage; + if ((pagelink < first_rx_page) || (last_rx_page < pagelink)) { + /* Ouch... Forget it! Skip all and start afresh... */ + printk(KERN_WARNING "%s: Ring overrun? Restoring...\n", dev->name); + /* You win some, you lose some. And sometimes plenty... */ + adapter_init(dev); + netif_wake_queue(dev); + dev->stats.rx_over_errors++; + return 0; + } + + /* OK, this look good, so far. Let's see if it's consistent... */ + /* Let's compute the start of the next packet, based on where we are */ + pagelink = next_rx_page + + ((header_buf.Rx_ByteCount + (4 - 1 + 0x100)) >> 8); + + /* Are we going to wrap around the page counter? */ + if (pagelink > last_rx_page) + pagelink -= (last_rx_page - first_rx_page + 1); + + /* Is the _computed_ next page number equal to what the adapter says? */ + if (pagelink != header_buf.Rx_NextPage) { + /* Naah, we'll skip this packet. Probably bogus data as well */ + printk(KERN_WARNING "%s: Page link out of sync! Restoring...\n", dev->name); + next_rx_page = header_buf.Rx_NextPage; /* at least a try... */ + de620_send_command(dev, W_DUMMY); + de620_set_register(dev, W_NPRF, next_rx_page); + dev->stats.rx_over_errors++; + return 0; + } + next_rx_page = pagelink; + + size = header_buf.Rx_ByteCount - 4; + if ((size < RUNT) || (GIANT < size)) { + printk(KERN_WARNING "%s: Illegal packet size: %d!\n", dev->name, size); + } + else { /* Good packet? */ + skb = dev_alloc_skb(size+2); + if (skb == NULL) { /* Yeah, but no place to put it... */ + printk(KERN_WARNING "%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, size); + dev->stats.rx_dropped++; + } + else { /* Yep! Go get it! */ + skb_reserve(skb,2); /* Align */ + /* skb->data points to the start of sk_buff data area */ + buffer = skb_put(skb,size); + /* copy the packet into the buffer */ + de620_read_block(dev, buffer, size); + pr_debug("Read %d bytes\n", size); + skb->protocol=eth_type_trans(skb,dev); + netif_rx(skb); /* deliver it "upstairs" */ + /* count all receives */ + dev->stats.rx_packets++; + dev->stats.rx_bytes += size; + } + } + + /* Let's peek ahead to see if we have read the last current packet */ + /* NOTE! We're _not_ checking the 'EMPTY'-flag! This seems better... */ + curr_page = de620_get_register(dev, R_CPR); + de620_set_register(dev, W_NPRF, next_rx_page); + pr_debug("next_rx_page=%d CPR=%d\n", next_rx_page, curr_page); + + return next_rx_page != curr_page; /* That was slightly tricky... */ +} + +/********************************************* + * + * Reset the adapter to a known state + * + */ +static int adapter_init(struct net_device *dev) +{ + int i; + static int was_down; + + if ((nic_data.Model == 3) || (nic_data.Model == 0)) { /* CT */ + EIPRegister = NCTL0; + if (nic_data.Media != 1) + EIPRegister |= NIS0; /* not BNC */ + } + else if (nic_data.Model == 2) { /* UTP */ + EIPRegister = NCTL0 | NIS0; + } + + if (utp) + EIPRegister = NCTL0 | NIS0; + if (bnc) + EIPRegister = NCTL0; + + de620_send_command(dev, W_CR | RNOP | CLEAR); + de620_send_command(dev, W_CR | RNOP); + + de620_set_register(dev, W_SCR, SCR_DEF); + /* disable recv to wait init */ + de620_set_register(dev, W_TCR, RXOFF); + + /* Set the node ID in the adapter */ + for (i = 0; i < 6; ++i) { /* W_PARn = 0xaa + n */ + de620_set_register(dev, W_PAR0 + i, dev->dev_addr[i]); + } + + de620_set_register(dev, W_EIP, EIPRegister); + + next_rx_page = first_rx_page = DE620_RX_START_PAGE; + if (nic_data.RAM_Size) + last_rx_page = nic_data.RAM_Size - 1; + else /* 64k RAM */ + last_rx_page = 255; + + de620_set_register(dev, W_SPR, first_rx_page); /* Start Page Register*/ + de620_set_register(dev, W_EPR, last_rx_page); /* End Page Register */ + de620_set_register(dev, W_CPR, first_rx_page);/*Current Page Register*/ + de620_send_command(dev, W_NPR | first_rx_page); /* Next Page Register*/ + de620_send_command(dev, W_DUMMY); + de620_set_delay(dev); + + /* Final sanity check: Anybody out there? */ + /* Let's hope some bits from the statusregister make a good check */ +#define CHECK_MASK ( 0 | TXSUC | T16 | 0 | RXCRC | RXSHORT | 0 | 0 ) +#define CHECK_OK ( 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 ) + /* success: X 0 0 X 0 0 X X */ + /* ignore: EEDI RXGOOD COLS LNKS*/ + + if (((i = de620_get_register(dev, R_STS)) & CHECK_MASK) != CHECK_OK) { + printk(KERN_ERR "%s: Something has happened to the DE-620! Please check it" +#ifdef SHUTDOWN_WHEN_LOST + " and do a new ifconfig" +#endif + "! (%02x)\n", dev->name, i); +#ifdef SHUTDOWN_WHEN_LOST + /* Goodbye, cruel world... */ + dev->flags &= ~IFF_UP; + de620_close(dev); +#endif + was_down = 1; + return 1; /* failed */ + } + if (was_down) { + printk(KERN_WARNING "%s: Thanks, I feel much better now!\n", dev->name); + was_down = 0; + } + + /* All OK, go ahead... */ + de620_set_register(dev, W_TCR, TCR_DEF); + + return 0; /* all ok */ +} + +static const struct net_device_ops de620_netdev_ops = { + .ndo_open = de620_open, + .ndo_stop = de620_close, + .ndo_start_xmit = de620_start_xmit, + .ndo_tx_timeout = de620_timeout, + .ndo_set_multicast_list = de620_set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +/****************************************************************************** + * + * Only start-up code below + * + */ +/**************************************** + * + * Check if there is a DE-620 connected + */ +struct net_device * __init de620_probe(int unit) +{ + byte checkbyte = 0xa5; + struct net_device *dev; + int err = -ENOMEM; + int i; + + dev = alloc_etherdev(0); + if (!dev) + goto out; + + spin_lock_init(&de620_lock); + + /* + * This is where the base_addr and irq gets set. + * Tunable at compile-time and insmod-time + */ + dev->base_addr = io; + dev->irq = irq; + + /* allow overriding parameters on command line */ + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + } + + pr_debug("%s", version); + + printk(KERN_INFO "D-Link DE-620 pocket adapter"); + + if (!request_region(dev->base_addr, 3, "de620")) { + printk(" io 0x%3lX, which is busy.\n", dev->base_addr); + err = -EBUSY; + goto out1; + } + + /* Initially, configure basic nibble mode, so we can read the EEPROM */ + NIC_Cmd = DEF_NIC_CMD; + de620_set_register(dev, W_EIP, EIPRegister); + + /* Anybody out there? */ + de620_set_register(dev, W_CPR, checkbyte); + checkbyte = de620_get_register(dev, R_CPR); + + if ((checkbyte != 0xa5) || (read_eeprom(dev) != 0)) { + printk(" not identified in the printer port\n"); + err = -ENODEV; + goto out2; + } + + /* else, got it! */ + dev->dev_addr[0] = nic_data.NodeID[0]; + for (i = 1; i < ETH_ALEN; i++) { + dev->dev_addr[i] = nic_data.NodeID[i]; + dev->broadcast[i] = 0xff; + } + + printk(", Ethernet Address: %pM", dev->dev_addr); + + printk(" (%dk RAM,", + (nic_data.RAM_Size) ? (nic_data.RAM_Size >> 2) : 64); + + if (nic_data.Media == 1) + printk(" BNC)\n"); + else + printk(" UTP)\n"); + + dev->netdev_ops = &de620_netdev_ops; + dev->watchdog_timeo = HZ*2; + + /* base_addr and irq are already set, see above! */ + + /* dump eeprom */ + pr_debug("\nEEPROM contents:\n" + "RAM_Size = 0x%02X\n" + "NodeID = %pM\n" + "Model = %d\n" + "Media = %d\n" + "SCR = 0x%02x\n", nic_data.RAM_Size, nic_data.NodeID, + nic_data.Model, nic_data.Media, nic_data.SCR); + + err = register_netdev(dev); + if (err) + goto out2; + return dev; + +out2: + release_region(dev->base_addr, 3); +out1: + free_netdev(dev); +out: + return ERR_PTR(err); +} + +/********************************** + * + * Read info from on-board EEPROM + * + * Note: Bitwise serial I/O to/from the EEPROM vi the status _register_! + */ +#define sendit(dev,data) de620_set_register(dev, W_EIP, data | EIPRegister); + +static unsigned short __init ReadAWord(struct net_device *dev, int from) +{ + unsigned short data; + int nbits; + + /* cs [__~~] SET SEND STATE */ + /* di [____] */ + /* sck [_~~_] */ + sendit(dev, 0); sendit(dev, 1); sendit(dev, 5); sendit(dev, 4); + + /* Send the 9-bit address from where we want to read the 16-bit word */ + for (nbits = 9; nbits > 0; --nbits, from <<= 1) { + if (from & 0x0100) { /* bit set? */ + /* cs [~~~~] SEND 1 */ + /* di [~~~~] */ + /* sck [_~~_] */ + sendit(dev, 6); sendit(dev, 7); sendit(dev, 7); sendit(dev, 6); + } + else { + /* cs [~~~~] SEND 0 */ + /* di [____] */ + /* sck [_~~_] */ + sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4); + } + } + + /* Shift in the 16-bit word. The bits appear serially in EEDI (=0x80) */ + for (data = 0, nbits = 16; nbits > 0; --nbits) { + /* cs [~~~~] SEND 0 */ + /* di [____] */ + /* sck [_~~_] */ + sendit(dev, 4); sendit(dev, 5); sendit(dev, 5); sendit(dev, 4); + data = (data << 1) | ((de620_get_register(dev, R_STS) & EEDI) >> 7); + } + /* cs [____] RESET SEND STATE */ + /* di [____] */ + /* sck [_~~_] */ + sendit(dev, 0); sendit(dev, 1); sendit(dev, 1); sendit(dev, 0); + + return data; +} + +static int __init read_eeprom(struct net_device *dev) +{ + unsigned short wrd; + + /* D-Link Ethernet addresses are in the series 00:80:c8:7X:XX:XX:XX */ + wrd = ReadAWord(dev, 0x1aa); /* bytes 0 + 1 of NodeID */ + if (!clone && (wrd != htons(0x0080))) /* Valid D-Link ether sequence? */ + return -1; /* Nope, not a DE-620 */ + nic_data.NodeID[0] = wrd & 0xff; + nic_data.NodeID[1] = wrd >> 8; + + wrd = ReadAWord(dev, 0x1ab); /* bytes 2 + 3 of NodeID */ + if (!clone && ((wrd & 0xff) != 0xc8)) /* Valid D-Link ether sequence? */ + return -1; /* Nope, not a DE-620 */ + nic_data.NodeID[2] = wrd & 0xff; + nic_data.NodeID[3] = wrd >> 8; + + wrd = ReadAWord(dev, 0x1ac); /* bytes 4 + 5 of NodeID */ + nic_data.NodeID[4] = wrd & 0xff; + nic_data.NodeID[5] = wrd >> 8; + + wrd = ReadAWord(dev, 0x1ad); /* RAM size in pages (256 bytes). 0 = 64k */ + nic_data.RAM_Size = (wrd >> 8); + + wrd = ReadAWord(dev, 0x1ae); /* hardware model (CT = 3) */ + nic_data.Model = (wrd & 0xff); + + wrd = ReadAWord(dev, 0x1af); /* media (indicates BNC/UTP) */ + nic_data.Media = (wrd & 0xff); + + wrd = ReadAWord(dev, 0x1a8); /* System Configuration Register */ + nic_data.SCR = (wrd >> 8); + + return 0; /* no errors */ +} + +/****************************************************************************** + * + * Loadable module skeleton + * + */ +#ifdef MODULE +static struct net_device *de620_dev; + +int __init init_module(void) +{ + de620_dev = de620_probe(-1); + if (IS_ERR(de620_dev)) + return PTR_ERR(de620_dev); + return 0; +} + +void cleanup_module(void) +{ + unregister_netdev(de620_dev); + release_region(de620_dev->base_addr, 3); + free_netdev(de620_dev); +} +#endif /* MODULE */ +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/dlink/de620.h b/drivers/net/ethernet/dlink/de620.h new file mode 100644 index 000000000000..e8d9a88f4cb5 --- /dev/null +++ b/drivers/net/ethernet/dlink/de620.h @@ -0,0 +1,117 @@ +/********************************************************* + * * + * Definition of D-Link DE-620 Ethernet Pocket adapter * + * * + *********************************************************/ + +/* DE-620's CMD port Command */ +#define CS0 0x08 /* 1->0 command strobe */ +#define ICEN 0x04 /* 0=enable DL3520 host interface */ +#define DS0 0x02 /* 1->0 data strobe 0 */ +#define DS1 0x01 /* 1->0 data strobe 1 */ + +#define WDIR 0x20 /* general 0=read 1=write */ +#define RDIR 0x00 /* (not 100% confirm ) */ +#define PS2WDIR 0x00 /* ps/2 mode 1=read, 0=write */ +#define PS2RDIR 0x20 + +#define IRQEN 0x10 /* 1 = enable printer IRQ line */ +#define SELECTIN 0x08 /* 1 = select printer */ +#define INITP 0x04 /* 0 = initial printer */ +#define AUTOFEED 0x02 /* 1 = printer auto form feed */ +#define STROBE 0x01 /* 0->1 data strobe */ + +#define RESET 0x08 +#define NIS0 0x20 /* 0 = BNC, 1 = UTP */ +#define NCTL0 0x10 + +/* DE-620 DIC Command */ +#define W_DUMMY 0x00 /* DIC reserved command */ +#define W_CR 0x20 /* DIC write command register */ +#define W_NPR 0x40 /* DIC write Next Page Register */ +#define W_TBR 0x60 /* DIC write Tx Byte Count 1 reg */ +#define W_RSA 0x80 /* DIC write Remote Start Addr 1 */ + +/* DE-620's STAT port bits 7-4 */ +#define EMPTY 0x80 /* 1 = receive buffer empty */ +#define INTLEVEL 0x40 /* 1 = interrupt level is high */ +#define TXBF1 0x20 /* 1 = transmit buffer 1 is in use */ +#define TXBF0 0x10 /* 1 = transmit buffer 0 is in use */ +#define READY 0x08 /* 1 = h/w ready to accept cmd/data */ + +/* IDC 1 Command */ +#define W_RSA1 0xa0 /* write remote start address 1 */ +#define W_RSA0 0xa1 /* write remote start address 0 */ +#define W_NPRF 0xa2 /* write next page register NPR15-NPR8 */ +#define W_DFR 0xa3 /* write delay factor register */ +#define W_CPR 0xa4 /* write current page register */ +#define W_SPR 0xa5 /* write start page register */ +#define W_EPR 0xa6 /* write end page register */ +#define W_SCR 0xa7 /* write system configuration register */ +#define W_TCR 0xa8 /* write Transceiver Configuration reg */ +#define W_EIP 0xa9 /* write EEPM Interface port */ +#define W_PAR0 0xaa /* write physical address register 0 */ +#define W_PAR1 0xab /* write physical address register 1 */ +#define W_PAR2 0xac /* write physical address register 2 */ +#define W_PAR3 0xad /* write physical address register 3 */ +#define W_PAR4 0xae /* write physical address register 4 */ +#define W_PAR5 0xaf /* write physical address register 5 */ + +/* IDC 2 Command */ +#define R_STS 0xc0 /* read status register */ +#define R_CPR 0xc1 /* read current page register */ +#define R_BPR 0xc2 /* read boundary page register */ +#define R_TDR 0xc3 /* read time domain reflectometry reg */ + +/* STATUS Register */ +#define EEDI 0x80 /* EEPM DO pin */ +#define TXSUC 0x40 /* tx success */ +#define T16 0x20 /* tx fail 16 times */ +#define TS1 0x40 /* 0=Tx success, 1=T16 */ +#define TS0 0x20 /* 0=Tx success, 1=T16 */ +#define RXGOOD 0x10 /* rx a good packet */ +#define RXCRC 0x08 /* rx a CRC error packet */ +#define RXSHORT 0x04 /* rx a short packet */ +#define COLS 0x02 /* coaxial collision status */ +#define LNKS 0x01 /* UTP link status */ + +/* Command Register */ +#define CLEAR 0x10 /* reset part of hardware */ +#define NOPER 0x08 /* No Operation */ +#define RNOP 0x08 +#define RRA 0x06 /* After RR then auto-advance NPR & BPR(=NPR-1) */ +#define RRN 0x04 /* Normal Remote Read mode */ +#define RW1 0x02 /* Remote Write tx buffer 1 ( page 6 - 11 ) */ +#define RW0 0x00 /* Remote Write tx buffer 0 ( page 0 - 5 ) */ +#define TXEN 0x01 /* 0->1 tx enable */ + +/* System Configuration Register */ +#define TESTON 0x80 /* test host data transfer reliability */ +#define SLEEP 0x40 /* sleep mode */ +#if 0 +#define FASTMODE 0x04 /* fast mode for intel 82360SL fast mode */ +#define BYTEMODE 0x02 /* byte mode */ +#else +#define FASTMODE 0x20 /* fast mode for intel 82360SL fast mode */ +#define BYTEMODE 0x10 /* byte mode */ +#endif +#define NIBBLEMODE 0x00 /* nibble mode */ +#define IRQINV 0x08 /* turn off IRQ line inverter */ +#define IRQNML 0x00 /* turn on IRQ line inverter */ +#define INTON 0x04 +#define AUTOFFSET 0x02 /* auto shift address to TPR+12 */ +#define AUTOTX 0x01 /* auto tx when leave RW mode */ + +/* Transceiver Configuration Register */ +#define JABBER 0x80 /* generate jabber condition */ +#define TXSUCINT 0x40 /* enable tx success interrupt */ +#define T16INT 0x20 /* enable T16 interrupt */ +#define RXERRPKT 0x10 /* accept CRC error or short packet */ +#define EXTERNALB2 0x0C /* external loopback 2 */ +#define EXTERNALB1 0x08 /* external loopback 1 */ +#define INTERNALB 0x04 /* internal loopback */ +#define NMLOPERATE 0x00 /* normal operation */ +#define RXPBM 0x03 /* rx physical, broadcast, multicast */ +#define RXPB 0x02 /* rx physical, broadcast */ +#define RXALL 0x01 /* rx all packet */ +#define RXOFF 0x00 /* rx disable */ diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c new file mode 100644 index 000000000000..ed73e4a93508 --- /dev/null +++ b/drivers/net/ethernet/dlink/dl2k.c @@ -0,0 +1,1824 @@ +/* D-Link DL2000-based Gigabit Ethernet Adapter Linux driver */ +/* + Copyright (c) 2001, 2002 by D-Link Corporation + Written by Edward Peng. + Created 03-May-2001, base on Linux' sundance.c. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. +*/ + +#define DRV_NAME "DL2000/TC902x-based linux driver" +#define DRV_VERSION "v1.19" +#define DRV_RELDATE "2007/08/12" +#include "dl2k.h" +#include + +static char version[] __devinitdata = + KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n"; +#define MAX_UNITS 8 +static int mtu[MAX_UNITS]; +static int vlan[MAX_UNITS]; +static int jumbo[MAX_UNITS]; +static char *media[MAX_UNITS]; +static int tx_flow=-1; +static int rx_flow=-1; +static int copy_thresh; +static int rx_coalesce=10; /* Rx frame count each interrupt */ +static int rx_timeout=200; /* Rx DMA wait time in 640ns increments */ +static int tx_coalesce=16; /* HW xmit count each TxDMAComplete */ + + +MODULE_AUTHOR ("Edward Peng"); +MODULE_DESCRIPTION ("D-Link DL2000-based Gigabit Ethernet Adapter"); +MODULE_LICENSE("GPL"); +module_param_array(mtu, int, NULL, 0); +module_param_array(media, charp, NULL, 0); +module_param_array(vlan, int, NULL, 0); +module_param_array(jumbo, int, NULL, 0); +module_param(tx_flow, int, 0); +module_param(rx_flow, int, 0); +module_param(copy_thresh, int, 0); +module_param(rx_coalesce, int, 0); /* Rx frame count each interrupt */ +module_param(rx_timeout, int, 0); /* Rx DMA wait time in 64ns increments */ +module_param(tx_coalesce, int, 0); /* HW xmit count each TxDMAComplete */ + + +/* Enable the default interrupts */ +#define DEFAULT_INTR (RxDMAComplete | HostError | IntRequested | TxDMAComplete| \ + UpdateStats | LinkEvent) +#define EnableInt() \ +writew(DEFAULT_INTR, ioaddr + IntEnable) + +static const int max_intrloop = 50; +static const int multicast_filter_limit = 0x40; + +static int rio_open (struct net_device *dev); +static void rio_timer (unsigned long data); +static void rio_tx_timeout (struct net_device *dev); +static void alloc_list (struct net_device *dev); +static netdev_tx_t start_xmit (struct sk_buff *skb, struct net_device *dev); +static irqreturn_t rio_interrupt (int irq, void *dev_instance); +static void rio_free_tx (struct net_device *dev, int irq); +static void tx_error (struct net_device *dev, int tx_status); +static int receive_packet (struct net_device *dev); +static void rio_error (struct net_device *dev, int int_status); +static int change_mtu (struct net_device *dev, int new_mtu); +static void set_multicast (struct net_device *dev); +static struct net_device_stats *get_stats (struct net_device *dev); +static int clear_stats (struct net_device *dev); +static int rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); +static int rio_close (struct net_device *dev); +static int find_miiphy (struct net_device *dev); +static int parse_eeprom (struct net_device *dev); +static int read_eeprom (long ioaddr, int eep_addr); +static int mii_wait_link (struct net_device *dev, int wait); +static int mii_set_media (struct net_device *dev); +static int mii_get_media (struct net_device *dev); +static int mii_set_media_pcs (struct net_device *dev); +static int mii_get_media_pcs (struct net_device *dev); +static int mii_read (struct net_device *dev, int phy_addr, int reg_num); +static int mii_write (struct net_device *dev, int phy_addr, int reg_num, + u16 data); + +static const struct ethtool_ops ethtool_ops; + +static const struct net_device_ops netdev_ops = { + .ndo_open = rio_open, + .ndo_start_xmit = start_xmit, + .ndo_stop = rio_close, + .ndo_get_stats = get_stats, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, + .ndo_set_multicast_list = set_multicast, + .ndo_do_ioctl = rio_ioctl, + .ndo_tx_timeout = rio_tx_timeout, + .ndo_change_mtu = change_mtu, +}; + +static int __devinit +rio_probe1 (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct net_device *dev; + struct netdev_private *np; + static int card_idx; + int chip_idx = ent->driver_data; + int err, irq; + long ioaddr; + static int version_printed; + void *ring_space; + dma_addr_t ring_dma; + + if (!version_printed++) + printk ("%s", version); + + err = pci_enable_device (pdev); + if (err) + return err; + + irq = pdev->irq; + err = pci_request_regions (pdev, "dl2k"); + if (err) + goto err_out_disable; + + pci_set_master (pdev); + dev = alloc_etherdev (sizeof (*np)); + if (!dev) { + err = -ENOMEM; + goto err_out_res; + } + SET_NETDEV_DEV(dev, &pdev->dev); + +#ifdef MEM_MAPPING + ioaddr = pci_resource_start (pdev, 1); + ioaddr = (long) ioremap (ioaddr, RIO_IO_SIZE); + if (!ioaddr) { + err = -ENOMEM; + goto err_out_dev; + } +#else + ioaddr = pci_resource_start (pdev, 0); +#endif + dev->base_addr = ioaddr; + dev->irq = irq; + np = netdev_priv(dev); + np->chip_id = chip_idx; + np->pdev = pdev; + spin_lock_init (&np->tx_lock); + spin_lock_init (&np->rx_lock); + + /* Parse manual configuration */ + np->an_enable = 1; + np->tx_coalesce = 1; + if (card_idx < MAX_UNITS) { + if (media[card_idx] != NULL) { + np->an_enable = 0; + if (strcmp (media[card_idx], "auto") == 0 || + strcmp (media[card_idx], "autosense") == 0 || + strcmp (media[card_idx], "0") == 0 ) { + np->an_enable = 2; + } else if (strcmp (media[card_idx], "100mbps_fd") == 0 || + strcmp (media[card_idx], "4") == 0) { + np->speed = 100; + np->full_duplex = 1; + } else if (strcmp (media[card_idx], "100mbps_hd") == 0 || + strcmp (media[card_idx], "3") == 0) { + np->speed = 100; + np->full_duplex = 0; + } else if (strcmp (media[card_idx], "10mbps_fd") == 0 || + strcmp (media[card_idx], "2") == 0) { + np->speed = 10; + np->full_duplex = 1; + } else if (strcmp (media[card_idx], "10mbps_hd") == 0 || + strcmp (media[card_idx], "1") == 0) { + np->speed = 10; + np->full_duplex = 0; + } else if (strcmp (media[card_idx], "1000mbps_fd") == 0 || + strcmp (media[card_idx], "6") == 0) { + np->speed=1000; + np->full_duplex=1; + } else if (strcmp (media[card_idx], "1000mbps_hd") == 0 || + strcmp (media[card_idx], "5") == 0) { + np->speed = 1000; + np->full_duplex = 0; + } else { + np->an_enable = 1; + } + } + if (jumbo[card_idx] != 0) { + np->jumbo = 1; + dev->mtu = MAX_JUMBO; + } else { + np->jumbo = 0; + if (mtu[card_idx] > 0 && mtu[card_idx] < PACKET_SIZE) + dev->mtu = mtu[card_idx]; + } + np->vlan = (vlan[card_idx] > 0 && vlan[card_idx] < 4096) ? + vlan[card_idx] : 0; + if (rx_coalesce > 0 && rx_timeout > 0) { + np->rx_coalesce = rx_coalesce; + np->rx_timeout = rx_timeout; + np->coalesce = 1; + } + np->tx_flow = (tx_flow == 0) ? 0 : 1; + np->rx_flow = (rx_flow == 0) ? 0 : 1; + + if (tx_coalesce < 1) + tx_coalesce = 1; + else if (tx_coalesce > TX_RING_SIZE-1) + tx_coalesce = TX_RING_SIZE - 1; + } + dev->netdev_ops = &netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + SET_ETHTOOL_OPS(dev, ðtool_ops); +#if 0 + dev->features = NETIF_F_IP_CSUM; +#endif + pci_set_drvdata (pdev, dev); + + ring_space = pci_alloc_consistent (pdev, TX_TOTAL_SIZE, &ring_dma); + if (!ring_space) + goto err_out_iounmap; + np->tx_ring = ring_space; + np->tx_ring_dma = ring_dma; + + ring_space = pci_alloc_consistent (pdev, RX_TOTAL_SIZE, &ring_dma); + if (!ring_space) + goto err_out_unmap_tx; + np->rx_ring = ring_space; + np->rx_ring_dma = ring_dma; + + /* Parse eeprom data */ + parse_eeprom (dev); + + /* Find PHY address */ + err = find_miiphy (dev); + if (err) + goto err_out_unmap_rx; + + /* Fiber device? */ + np->phy_media = (readw(ioaddr + ASICCtrl) & PhyMedia) ? 1 : 0; + np->link_status = 0; + /* Set media and reset PHY */ + if (np->phy_media) { + /* default Auto-Negotiation for fiber deivices */ + if (np->an_enable == 2) { + np->an_enable = 1; + } + mii_set_media_pcs (dev); + } else { + /* Auto-Negotiation is mandatory for 1000BASE-T, + IEEE 802.3ab Annex 28D page 14 */ + if (np->speed == 1000) + np->an_enable = 1; + mii_set_media (dev); + } + + err = register_netdev (dev); + if (err) + goto err_out_unmap_rx; + + card_idx++; + + printk (KERN_INFO "%s: %s, %pM, IRQ %d\n", + dev->name, np->name, dev->dev_addr, irq); + if (tx_coalesce > 1) + printk(KERN_INFO "tx_coalesce:\t%d packets\n", + tx_coalesce); + if (np->coalesce) + printk(KERN_INFO + "rx_coalesce:\t%d packets\n" + "rx_timeout: \t%d ns\n", + np->rx_coalesce, np->rx_timeout*640); + if (np->vlan) + printk(KERN_INFO "vlan(id):\t%d\n", np->vlan); + return 0; + + err_out_unmap_rx: + pci_free_consistent (pdev, RX_TOTAL_SIZE, np->rx_ring, np->rx_ring_dma); + err_out_unmap_tx: + pci_free_consistent (pdev, TX_TOTAL_SIZE, np->tx_ring, np->tx_ring_dma); + err_out_iounmap: +#ifdef MEM_MAPPING + iounmap ((void *) ioaddr); + + err_out_dev: +#endif + free_netdev (dev); + + err_out_res: + pci_release_regions (pdev); + + err_out_disable: + pci_disable_device (pdev); + return err; +} + +static int +find_miiphy (struct net_device *dev) +{ + int i, phy_found = 0; + struct netdev_private *np; + long ioaddr; + np = netdev_priv(dev); + ioaddr = dev->base_addr; + np->phy_addr = 1; + + for (i = 31; i >= 0; i--) { + int mii_status = mii_read (dev, i, 1); + if (mii_status != 0xffff && mii_status != 0x0000) { + np->phy_addr = i; + phy_found++; + } + } + if (!phy_found) { + printk (KERN_ERR "%s: No MII PHY found!\n", dev->name); + return -ENODEV; + } + return 0; +} + +static int +parse_eeprom (struct net_device *dev) +{ + int i, j; + long ioaddr = dev->base_addr; + u8 sromdata[256]; + u8 *psib; + u32 crc; + PSROM_t psrom = (PSROM_t) sromdata; + struct netdev_private *np = netdev_priv(dev); + + int cid, next; + +#ifdef MEM_MAPPING + ioaddr = pci_resource_start (np->pdev, 0); +#endif + /* Read eeprom */ + for (i = 0; i < 128; i++) { + ((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom (ioaddr, i)); + } +#ifdef MEM_MAPPING + ioaddr = dev->base_addr; +#endif + if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) { /* D-Link Only */ + /* Check CRC */ + crc = ~ether_crc_le (256 - 4, sromdata); + if (psrom->crc != cpu_to_le32(crc)) { + printk (KERN_ERR "%s: EEPROM data CRC error.\n", + dev->name); + return -1; + } + } + + /* Set MAC address */ + for (i = 0; i < 6; i++) + dev->dev_addr[i] = psrom->mac_addr[i]; + + if (np->pdev->vendor != PCI_VENDOR_ID_DLINK) { + return 0; + } + + /* Parse Software Information Block */ + i = 0x30; + psib = (u8 *) sromdata; + do { + cid = psib[i++]; + next = psib[i++]; + if ((cid == 0 && next == 0) || (cid == 0xff && next == 0xff)) { + printk (KERN_ERR "Cell data error\n"); + return -1; + } + switch (cid) { + case 0: /* Format version */ + break; + case 1: /* End of cell */ + return 0; + case 2: /* Duplex Polarity */ + np->duplex_polarity = psib[i]; + writeb (readb (ioaddr + PhyCtrl) | psib[i], + ioaddr + PhyCtrl); + break; + case 3: /* Wake Polarity */ + np->wake_polarity = psib[i]; + break; + case 9: /* Adapter description */ + j = (next - i > 255) ? 255 : next - i; + memcpy (np->name, &(psib[i]), j); + break; + case 4: + case 5: + case 6: + case 7: + case 8: /* Reversed */ + break; + default: /* Unknown cell */ + return -1; + } + i = next; + } while (1); + + return 0; +} + +static int +rio_open (struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + long ioaddr = dev->base_addr; + int i; + u16 macctrl; + + i = request_irq (dev->irq, rio_interrupt, IRQF_SHARED, dev->name, dev); + if (i) + return i; + + /* Reset all logic functions */ + writew (GlobalReset | DMAReset | FIFOReset | NetworkReset | HostReset, + ioaddr + ASICCtrl + 2); + mdelay(10); + + /* DebugCtrl bit 4, 5, 9 must set */ + writel (readl (ioaddr + DebugCtrl) | 0x0230, ioaddr + DebugCtrl); + + /* Jumbo frame */ + if (np->jumbo != 0) + writew (MAX_JUMBO+14, ioaddr + MaxFrameSize); + + alloc_list (dev); + + /* Get station address */ + for (i = 0; i < 6; i++) + writeb (dev->dev_addr[i], ioaddr + StationAddr0 + i); + + set_multicast (dev); + if (np->coalesce) { + writel (np->rx_coalesce | np->rx_timeout << 16, + ioaddr + RxDMAIntCtrl); + } + /* Set RIO to poll every N*320nsec. */ + writeb (0x20, ioaddr + RxDMAPollPeriod); + writeb (0xff, ioaddr + TxDMAPollPeriod); + writeb (0x30, ioaddr + RxDMABurstThresh); + writeb (0x30, ioaddr + RxDMAUrgentThresh); + writel (0x0007ffff, ioaddr + RmonStatMask); + /* clear statistics */ + clear_stats (dev); + + /* VLAN supported */ + if (np->vlan) { + /* priority field in RxDMAIntCtrl */ + writel (readl(ioaddr + RxDMAIntCtrl) | 0x7 << 10, + ioaddr + RxDMAIntCtrl); + /* VLANId */ + writew (np->vlan, ioaddr + VLANId); + /* Length/Type should be 0x8100 */ + writel (0x8100 << 16 | np->vlan, ioaddr + VLANTag); + /* Enable AutoVLANuntagging, but disable AutoVLANtagging. + VLAN information tagged by TFC' VID, CFI fields. */ + writel (readl (ioaddr + MACCtrl) | AutoVLANuntagging, + ioaddr + MACCtrl); + } + + init_timer (&np->timer); + np->timer.expires = jiffies + 1*HZ; + np->timer.data = (unsigned long) dev; + np->timer.function = rio_timer; + add_timer (&np->timer); + + /* Start Tx/Rx */ + writel (readl (ioaddr + MACCtrl) | StatsEnable | RxEnable | TxEnable, + ioaddr + MACCtrl); + + macctrl = 0; + macctrl |= (np->vlan) ? AutoVLANuntagging : 0; + macctrl |= (np->full_duplex) ? DuplexSelect : 0; + macctrl |= (np->tx_flow) ? TxFlowControlEnable : 0; + macctrl |= (np->rx_flow) ? RxFlowControlEnable : 0; + writew(macctrl, ioaddr + MACCtrl); + + netif_start_queue (dev); + + /* Enable default interrupts */ + EnableInt (); + return 0; +} + +static void +rio_timer (unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct netdev_private *np = netdev_priv(dev); + unsigned int entry; + int next_tick = 1*HZ; + unsigned long flags; + + spin_lock_irqsave(&np->rx_lock, flags); + /* Recover rx ring exhausted error */ + if (np->cur_rx - np->old_rx >= RX_RING_SIZE) { + printk(KERN_INFO "Try to recover rx ring exhausted...\n"); + /* Re-allocate skbuffs to fill the descriptor ring */ + for (; np->cur_rx - np->old_rx > 0; np->old_rx++) { + struct sk_buff *skb; + entry = np->old_rx % RX_RING_SIZE; + /* Dropped packets don't need to re-allocate */ + if (np->rx_skbuff[entry] == NULL) { + skb = netdev_alloc_skb_ip_align(dev, + np->rx_buf_sz); + if (skb == NULL) { + np->rx_ring[entry].fraginfo = 0; + printk (KERN_INFO + "%s: Still unable to re-allocate Rx skbuff.#%d\n", + dev->name, entry); + break; + } + np->rx_skbuff[entry] = skb; + np->rx_ring[entry].fraginfo = + cpu_to_le64 (pci_map_single + (np->pdev, skb->data, np->rx_buf_sz, + PCI_DMA_FROMDEVICE)); + } + np->rx_ring[entry].fraginfo |= + cpu_to_le64((u64)np->rx_buf_sz << 48); + np->rx_ring[entry].status = 0; + } /* end for */ + } /* end if */ + spin_unlock_irqrestore (&np->rx_lock, flags); + np->timer.expires = jiffies + next_tick; + add_timer(&np->timer); +} + +static void +rio_tx_timeout (struct net_device *dev) +{ + long ioaddr = dev->base_addr; + + printk (KERN_INFO "%s: Tx timed out (%4.4x), is buffer full?\n", + dev->name, readl (ioaddr + TxStatus)); + rio_free_tx(dev, 0); + dev->if_port = 0; + dev->trans_start = jiffies; /* prevent tx timeout */ +} + + /* allocate and initialize Tx and Rx descriptors */ +static void +alloc_list (struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + np->cur_rx = np->cur_tx = 0; + np->old_rx = np->old_tx = 0; + np->rx_buf_sz = (dev->mtu <= 1500 ? PACKET_SIZE : dev->mtu + 32); + + /* Initialize Tx descriptors, TFDListPtr leaves in start_xmit(). */ + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_skbuff[i] = NULL; + np->tx_ring[i].status = cpu_to_le64 (TFDDone); + np->tx_ring[i].next_desc = cpu_to_le64 (np->tx_ring_dma + + ((i+1)%TX_RING_SIZE) * + sizeof (struct netdev_desc)); + } + + /* Initialize Rx descriptors */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].next_desc = cpu_to_le64 (np->rx_ring_dma + + ((i + 1) % RX_RING_SIZE) * + sizeof (struct netdev_desc)); + np->rx_ring[i].status = 0; + np->rx_ring[i].fraginfo = 0; + np->rx_skbuff[i] = NULL; + } + + /* Allocate the rx buffers */ + for (i = 0; i < RX_RING_SIZE; i++) { + /* Allocated fixed size of skbuff */ + struct sk_buff *skb; + + skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz); + np->rx_skbuff[i] = skb; + if (skb == NULL) { + printk (KERN_ERR + "%s: alloc_list: allocate Rx buffer error! ", + dev->name); + break; + } + /* Rubicon now supports 40 bits of addressing space. */ + np->rx_ring[i].fraginfo = + cpu_to_le64 ( pci_map_single ( + np->pdev, skb->data, np->rx_buf_sz, + PCI_DMA_FROMDEVICE)); + np->rx_ring[i].fraginfo |= cpu_to_le64((u64)np->rx_buf_sz << 48); + } + + /* Set RFDListPtr */ + writel (np->rx_ring_dma, dev->base_addr + RFDListPtr0); + writel (0, dev->base_addr + RFDListPtr1); +} + +static netdev_tx_t +start_xmit (struct sk_buff *skb, struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + struct netdev_desc *txdesc; + unsigned entry; + u32 ioaddr; + u64 tfc_vlan_tag = 0; + + if (np->link_status == 0) { /* Link Down */ + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + ioaddr = dev->base_addr; + entry = np->cur_tx % TX_RING_SIZE; + np->tx_skbuff[entry] = skb; + txdesc = &np->tx_ring[entry]; + +#if 0 + if (skb->ip_summed == CHECKSUM_PARTIAL) { + txdesc->status |= + cpu_to_le64 (TCPChecksumEnable | UDPChecksumEnable | + IPChecksumEnable); + } +#endif + if (np->vlan) { + tfc_vlan_tag = VLANTagInsert | + ((u64)np->vlan << 32) | + ((u64)skb->priority << 45); + } + txdesc->fraginfo = cpu_to_le64 (pci_map_single (np->pdev, skb->data, + skb->len, + PCI_DMA_TODEVICE)); + txdesc->fraginfo |= cpu_to_le64((u64)skb->len << 48); + + /* DL2K bug: DMA fails to get next descriptor ptr in 10Mbps mode + * Work around: Always use 1 descriptor in 10Mbps mode */ + if (entry % np->tx_coalesce == 0 || np->speed == 10) + txdesc->status = cpu_to_le64 (entry | tfc_vlan_tag | + WordAlignDisable | + TxDMAIndicate | + (1 << FragCountShift)); + else + txdesc->status = cpu_to_le64 (entry | tfc_vlan_tag | + WordAlignDisable | + (1 << FragCountShift)); + + /* TxDMAPollNow */ + writel (readl (ioaddr + DMACtrl) | 0x00001000, ioaddr + DMACtrl); + /* Schedule ISR */ + writel(10000, ioaddr + CountDown); + np->cur_tx = (np->cur_tx + 1) % TX_RING_SIZE; + if ((np->cur_tx - np->old_tx + TX_RING_SIZE) % TX_RING_SIZE + < TX_QUEUE_LEN - 1 && np->speed != 10) { + /* do nothing */ + } else if (!netif_queue_stopped(dev)) { + netif_stop_queue (dev); + } + + /* The first TFDListPtr */ + if (readl (dev->base_addr + TFDListPtr0) == 0) { + writel (np->tx_ring_dma + entry * sizeof (struct netdev_desc), + dev->base_addr + TFDListPtr0); + writel (0, dev->base_addr + TFDListPtr1); + } + + return NETDEV_TX_OK; +} + +static irqreturn_t +rio_interrupt (int irq, void *dev_instance) +{ + struct net_device *dev = dev_instance; + struct netdev_private *np; + unsigned int_status; + long ioaddr; + int cnt = max_intrloop; + int handled = 0; + + ioaddr = dev->base_addr; + np = netdev_priv(dev); + while (1) { + int_status = readw (ioaddr + IntStatus); + writew (int_status, ioaddr + IntStatus); + int_status &= DEFAULT_INTR; + if (int_status == 0 || --cnt < 0) + break; + handled = 1; + /* Processing received packets */ + if (int_status & RxDMAComplete) + receive_packet (dev); + /* TxDMAComplete interrupt */ + if ((int_status & (TxDMAComplete|IntRequested))) { + int tx_status; + tx_status = readl (ioaddr + TxStatus); + if (tx_status & 0x01) + tx_error (dev, tx_status); + /* Free used tx skbuffs */ + rio_free_tx (dev, 1); + } + + /* Handle uncommon events */ + if (int_status & + (HostError | LinkEvent | UpdateStats)) + rio_error (dev, int_status); + } + if (np->cur_tx != np->old_tx) + writel (100, ioaddr + CountDown); + return IRQ_RETVAL(handled); +} + +static inline dma_addr_t desc_to_dma(struct netdev_desc *desc) +{ + return le64_to_cpu(desc->fraginfo) & DMA_BIT_MASK(48); +} + +static void +rio_free_tx (struct net_device *dev, int irq) +{ + struct netdev_private *np = netdev_priv(dev); + int entry = np->old_tx % TX_RING_SIZE; + int tx_use = 0; + unsigned long flag = 0; + + if (irq) + spin_lock(&np->tx_lock); + else + spin_lock_irqsave(&np->tx_lock, flag); + + /* Free used tx skbuffs */ + while (entry != np->cur_tx) { + struct sk_buff *skb; + + if (!(np->tx_ring[entry].status & cpu_to_le64(TFDDone))) + break; + skb = np->tx_skbuff[entry]; + pci_unmap_single (np->pdev, + desc_to_dma(&np->tx_ring[entry]), + skb->len, PCI_DMA_TODEVICE); + if (irq) + dev_kfree_skb_irq (skb); + else + dev_kfree_skb (skb); + + np->tx_skbuff[entry] = NULL; + entry = (entry + 1) % TX_RING_SIZE; + tx_use++; + } + if (irq) + spin_unlock(&np->tx_lock); + else + spin_unlock_irqrestore(&np->tx_lock, flag); + np->old_tx = entry; + + /* If the ring is no longer full, clear tx_full and + call netif_wake_queue() */ + + if (netif_queue_stopped(dev) && + ((np->cur_tx - np->old_tx + TX_RING_SIZE) % TX_RING_SIZE + < TX_QUEUE_LEN - 1 || np->speed == 10)) { + netif_wake_queue (dev); + } +} + +static void +tx_error (struct net_device *dev, int tx_status) +{ + struct netdev_private *np; + long ioaddr = dev->base_addr; + int frame_id; + int i; + + np = netdev_priv(dev); + + frame_id = (tx_status & 0xffff0000); + printk (KERN_ERR "%s: Transmit error, TxStatus %4.4x, FrameId %d.\n", + dev->name, tx_status, frame_id); + np->stats.tx_errors++; + /* Ttransmit Underrun */ + if (tx_status & 0x10) { + np->stats.tx_fifo_errors++; + writew (readw (ioaddr + TxStartThresh) + 0x10, + ioaddr + TxStartThresh); + /* Transmit Underrun need to set TxReset, DMARest, FIFOReset */ + writew (TxReset | DMAReset | FIFOReset | NetworkReset, + ioaddr + ASICCtrl + 2); + /* Wait for ResetBusy bit clear */ + for (i = 50; i > 0; i--) { + if ((readw (ioaddr + ASICCtrl + 2) & ResetBusy) == 0) + break; + mdelay (1); + } + rio_free_tx (dev, 1); + /* Reset TFDListPtr */ + writel (np->tx_ring_dma + + np->old_tx * sizeof (struct netdev_desc), + dev->base_addr + TFDListPtr0); + writel (0, dev->base_addr + TFDListPtr1); + + /* Let TxStartThresh stay default value */ + } + /* Late Collision */ + if (tx_status & 0x04) { + np->stats.tx_fifo_errors++; + /* TxReset and clear FIFO */ + writew (TxReset | FIFOReset, ioaddr + ASICCtrl + 2); + /* Wait reset done */ + for (i = 50; i > 0; i--) { + if ((readw (ioaddr + ASICCtrl + 2) & ResetBusy) == 0) + break; + mdelay (1); + } + /* Let TxStartThresh stay default value */ + } + /* Maximum Collisions */ +#ifdef ETHER_STATS + if (tx_status & 0x08) + np->stats.collisions16++; +#else + if (tx_status & 0x08) + np->stats.collisions++; +#endif + /* Restart the Tx */ + writel (readw (dev->base_addr + MACCtrl) | TxEnable, ioaddr + MACCtrl); +} + +static int +receive_packet (struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int entry = np->cur_rx % RX_RING_SIZE; + int cnt = 30; + + /* If RFDDone, FrameStart and FrameEnd set, there is a new packet in. */ + while (1) { + struct netdev_desc *desc = &np->rx_ring[entry]; + int pkt_len; + u64 frame_status; + + if (!(desc->status & cpu_to_le64(RFDDone)) || + !(desc->status & cpu_to_le64(FrameStart)) || + !(desc->status & cpu_to_le64(FrameEnd))) + break; + + /* Chip omits the CRC. */ + frame_status = le64_to_cpu(desc->status); + pkt_len = frame_status & 0xffff; + if (--cnt < 0) + break; + /* Update rx error statistics, drop packet. */ + if (frame_status & RFS_Errors) { + np->stats.rx_errors++; + if (frame_status & (RxRuntFrame | RxLengthError)) + np->stats.rx_length_errors++; + if (frame_status & RxFCSError) + np->stats.rx_crc_errors++; + if (frame_status & RxAlignmentError && np->speed != 1000) + np->stats.rx_frame_errors++; + if (frame_status & RxFIFOOverrun) + np->stats.rx_fifo_errors++; + } else { + struct sk_buff *skb; + + /* Small skbuffs for short packets */ + if (pkt_len > copy_thresh) { + pci_unmap_single (np->pdev, + desc_to_dma(desc), + np->rx_buf_sz, + PCI_DMA_FROMDEVICE); + skb_put (skb = np->rx_skbuff[entry], pkt_len); + np->rx_skbuff[entry] = NULL; + } else if ((skb = netdev_alloc_skb_ip_align(dev, pkt_len))) { + pci_dma_sync_single_for_cpu(np->pdev, + desc_to_dma(desc), + np->rx_buf_sz, + PCI_DMA_FROMDEVICE); + skb_copy_to_linear_data (skb, + np->rx_skbuff[entry]->data, + pkt_len); + skb_put (skb, pkt_len); + pci_dma_sync_single_for_device(np->pdev, + desc_to_dma(desc), + np->rx_buf_sz, + PCI_DMA_FROMDEVICE); + } + skb->protocol = eth_type_trans (skb, dev); +#if 0 + /* Checksum done by hw, but csum value unavailable. */ + if (np->pdev->pci_rev_id >= 0x0c && + !(frame_status & (TCPError | UDPError | IPError))) { + skb->ip_summed = CHECKSUM_UNNECESSARY; + } +#endif + netif_rx (skb); + } + entry = (entry + 1) % RX_RING_SIZE; + } + spin_lock(&np->rx_lock); + np->cur_rx = entry; + /* Re-allocate skbuffs to fill the descriptor ring */ + entry = np->old_rx; + while (entry != np->cur_rx) { + struct sk_buff *skb; + /* Dropped packets don't need to re-allocate */ + if (np->rx_skbuff[entry] == NULL) { + skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz); + if (skb == NULL) { + np->rx_ring[entry].fraginfo = 0; + printk (KERN_INFO + "%s: receive_packet: " + "Unable to re-allocate Rx skbuff.#%d\n", + dev->name, entry); + break; + } + np->rx_skbuff[entry] = skb; + np->rx_ring[entry].fraginfo = + cpu_to_le64 (pci_map_single + (np->pdev, skb->data, np->rx_buf_sz, + PCI_DMA_FROMDEVICE)); + } + np->rx_ring[entry].fraginfo |= + cpu_to_le64((u64)np->rx_buf_sz << 48); + np->rx_ring[entry].status = 0; + entry = (entry + 1) % RX_RING_SIZE; + } + np->old_rx = entry; + spin_unlock(&np->rx_lock); + return 0; +} + +static void +rio_error (struct net_device *dev, int int_status) +{ + long ioaddr = dev->base_addr; + struct netdev_private *np = netdev_priv(dev); + u16 macctrl; + + /* Link change event */ + if (int_status & LinkEvent) { + if (mii_wait_link (dev, 10) == 0) { + printk (KERN_INFO "%s: Link up\n", dev->name); + if (np->phy_media) + mii_get_media_pcs (dev); + else + mii_get_media (dev); + if (np->speed == 1000) + np->tx_coalesce = tx_coalesce; + else + np->tx_coalesce = 1; + macctrl = 0; + macctrl |= (np->vlan) ? AutoVLANuntagging : 0; + macctrl |= (np->full_duplex) ? DuplexSelect : 0; + macctrl |= (np->tx_flow) ? + TxFlowControlEnable : 0; + macctrl |= (np->rx_flow) ? + RxFlowControlEnable : 0; + writew(macctrl, ioaddr + MACCtrl); + np->link_status = 1; + netif_carrier_on(dev); + } else { + printk (KERN_INFO "%s: Link off\n", dev->name); + np->link_status = 0; + netif_carrier_off(dev); + } + } + + /* UpdateStats statistics registers */ + if (int_status & UpdateStats) { + get_stats (dev); + } + + /* PCI Error, a catastronphic error related to the bus interface + occurs, set GlobalReset and HostReset to reset. */ + if (int_status & HostError) { + printk (KERN_ERR "%s: HostError! IntStatus %4.4x.\n", + dev->name, int_status); + writew (GlobalReset | HostReset, ioaddr + ASICCtrl + 2); + mdelay (500); + } +} + +static struct net_device_stats * +get_stats (struct net_device *dev) +{ + long ioaddr = dev->base_addr; + struct netdev_private *np = netdev_priv(dev); +#ifdef MEM_MAPPING + int i; +#endif + unsigned int stat_reg; + + /* All statistics registers need to be acknowledged, + else statistic overflow could cause problems */ + + np->stats.rx_packets += readl (ioaddr + FramesRcvOk); + np->stats.tx_packets += readl (ioaddr + FramesXmtOk); + np->stats.rx_bytes += readl (ioaddr + OctetRcvOk); + np->stats.tx_bytes += readl (ioaddr + OctetXmtOk); + + np->stats.multicast = readl (ioaddr + McstFramesRcvdOk); + np->stats.collisions += readl (ioaddr + SingleColFrames) + + readl (ioaddr + MultiColFrames); + + /* detailed tx errors */ + stat_reg = readw (ioaddr + FramesAbortXSColls); + np->stats.tx_aborted_errors += stat_reg; + np->stats.tx_errors += stat_reg; + + stat_reg = readw (ioaddr + CarrierSenseErrors); + np->stats.tx_carrier_errors += stat_reg; + np->stats.tx_errors += stat_reg; + + /* Clear all other statistic register. */ + readl (ioaddr + McstOctetXmtOk); + readw (ioaddr + BcstFramesXmtdOk); + readl (ioaddr + McstFramesXmtdOk); + readw (ioaddr + BcstFramesRcvdOk); + readw (ioaddr + MacControlFramesRcvd); + readw (ioaddr + FrameTooLongErrors); + readw (ioaddr + InRangeLengthErrors); + readw (ioaddr + FramesCheckSeqErrors); + readw (ioaddr + FramesLostRxErrors); + readl (ioaddr + McstOctetXmtOk); + readl (ioaddr + BcstOctetXmtOk); + readl (ioaddr + McstFramesXmtdOk); + readl (ioaddr + FramesWDeferredXmt); + readl (ioaddr + LateCollisions); + readw (ioaddr + BcstFramesXmtdOk); + readw (ioaddr + MacControlFramesXmtd); + readw (ioaddr + FramesWEXDeferal); + +#ifdef MEM_MAPPING + for (i = 0x100; i <= 0x150; i += 4) + readl (ioaddr + i); +#endif + readw (ioaddr + TxJumboFrames); + readw (ioaddr + RxJumboFrames); + readw (ioaddr + TCPCheckSumErrors); + readw (ioaddr + UDPCheckSumErrors); + readw (ioaddr + IPCheckSumErrors); + return &np->stats; +} + +static int +clear_stats (struct net_device *dev) +{ + long ioaddr = dev->base_addr; +#ifdef MEM_MAPPING + int i; +#endif + + /* All statistics registers need to be acknowledged, + else statistic overflow could cause problems */ + readl (ioaddr + FramesRcvOk); + readl (ioaddr + FramesXmtOk); + readl (ioaddr + OctetRcvOk); + readl (ioaddr + OctetXmtOk); + + readl (ioaddr + McstFramesRcvdOk); + readl (ioaddr + SingleColFrames); + readl (ioaddr + MultiColFrames); + readl (ioaddr + LateCollisions); + /* detailed rx errors */ + readw (ioaddr + FrameTooLongErrors); + readw (ioaddr + InRangeLengthErrors); + readw (ioaddr + FramesCheckSeqErrors); + readw (ioaddr + FramesLostRxErrors); + + /* detailed tx errors */ + readw (ioaddr + FramesAbortXSColls); + readw (ioaddr + CarrierSenseErrors); + + /* Clear all other statistic register. */ + readl (ioaddr + McstOctetXmtOk); + readw (ioaddr + BcstFramesXmtdOk); + readl (ioaddr + McstFramesXmtdOk); + readw (ioaddr + BcstFramesRcvdOk); + readw (ioaddr + MacControlFramesRcvd); + readl (ioaddr + McstOctetXmtOk); + readl (ioaddr + BcstOctetXmtOk); + readl (ioaddr + McstFramesXmtdOk); + readl (ioaddr + FramesWDeferredXmt); + readw (ioaddr + BcstFramesXmtdOk); + readw (ioaddr + MacControlFramesXmtd); + readw (ioaddr + FramesWEXDeferal); +#ifdef MEM_MAPPING + for (i = 0x100; i <= 0x150; i += 4) + readl (ioaddr + i); +#endif + readw (ioaddr + TxJumboFrames); + readw (ioaddr + RxJumboFrames); + readw (ioaddr + TCPCheckSumErrors); + readw (ioaddr + UDPCheckSumErrors); + readw (ioaddr + IPCheckSumErrors); + return 0; +} + + +static int +change_mtu (struct net_device *dev, int new_mtu) +{ + struct netdev_private *np = netdev_priv(dev); + int max = (np->jumbo) ? MAX_JUMBO : 1536; + + if ((new_mtu < 68) || (new_mtu > max)) { + return -EINVAL; + } + + dev->mtu = new_mtu; + + return 0; +} + +static void +set_multicast (struct net_device *dev) +{ + long ioaddr = dev->base_addr; + u32 hash_table[2]; + u16 rx_mode = 0; + struct netdev_private *np = netdev_priv(dev); + + hash_table[0] = hash_table[1] = 0; + /* RxFlowcontrol DA: 01-80-C2-00-00-01. Hash index=0x39 */ + hash_table[1] |= 0x02000000; + if (dev->flags & IFF_PROMISC) { + /* Receive all frames promiscuously. */ + rx_mode = ReceiveAllFrames; + } else if ((dev->flags & IFF_ALLMULTI) || + (netdev_mc_count(dev) > multicast_filter_limit)) { + /* Receive broadcast and multicast frames */ + rx_mode = ReceiveBroadcast | ReceiveMulticast | ReceiveUnicast; + } else if (!netdev_mc_empty(dev)) { + struct netdev_hw_addr *ha; + /* Receive broadcast frames and multicast frames filtering + by Hashtable */ + rx_mode = + ReceiveBroadcast | ReceiveMulticastHash | ReceiveUnicast; + netdev_for_each_mc_addr(ha, dev) { + int bit, index = 0; + int crc = ether_crc_le(ETH_ALEN, ha->addr); + /* The inverted high significant 6 bits of CRC are + used as an index to hashtable */ + for (bit = 0; bit < 6; bit++) + if (crc & (1 << (31 - bit))) + index |= (1 << bit); + hash_table[index / 32] |= (1 << (index % 32)); + } + } else { + rx_mode = ReceiveBroadcast | ReceiveUnicast; + } + if (np->vlan) { + /* ReceiveVLANMatch field in ReceiveMode */ + rx_mode |= ReceiveVLANMatch; + } + + writel (hash_table[0], ioaddr + HashTable0); + writel (hash_table[1], ioaddr + HashTable1); + writew (rx_mode, ioaddr + ReceiveMode); +} + +static void rio_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct netdev_private *np = netdev_priv(dev); + strcpy(info->driver, "dl2k"); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(np->pdev)); +} + +static int rio_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct netdev_private *np = netdev_priv(dev); + if (np->phy_media) { + /* fiber device */ + cmd->supported = SUPPORTED_Autoneg | SUPPORTED_FIBRE; + cmd->advertising= ADVERTISED_Autoneg | ADVERTISED_FIBRE; + cmd->port = PORT_FIBRE; + cmd->transceiver = XCVR_INTERNAL; + } else { + /* copper device */ + cmd->supported = SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | SUPPORTED_MII; + cmd->advertising = ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | ADVERTISED_1000baseT_Full| + ADVERTISED_Autoneg | ADVERTISED_MII; + cmd->port = PORT_MII; + cmd->transceiver = XCVR_INTERNAL; + } + if ( np->link_status ) { + ethtool_cmd_speed_set(cmd, np->speed); + cmd->duplex = np->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; + } else { + ethtool_cmd_speed_set(cmd, -1); + cmd->duplex = -1; + } + if ( np->an_enable) + cmd->autoneg = AUTONEG_ENABLE; + else + cmd->autoneg = AUTONEG_DISABLE; + + cmd->phy_address = np->phy_addr; + return 0; +} + +static int rio_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct netdev_private *np = netdev_priv(dev); + netif_carrier_off(dev); + if (cmd->autoneg == AUTONEG_ENABLE) { + if (np->an_enable) + return 0; + else { + np->an_enable = 1; + mii_set_media(dev); + return 0; + } + } else { + np->an_enable = 0; + if (np->speed == 1000) { + ethtool_cmd_speed_set(cmd, SPEED_100); + cmd->duplex = DUPLEX_FULL; + printk("Warning!! Can't disable Auto negotiation in 1000Mbps, change to Manual 100Mbps, Full duplex.\n"); + } + switch (ethtool_cmd_speed(cmd)) { + case SPEED_10: + np->speed = 10; + np->full_duplex = (cmd->duplex == DUPLEX_FULL); + break; + case SPEED_100: + np->speed = 100; + np->full_duplex = (cmd->duplex == DUPLEX_FULL); + break; + case SPEED_1000: /* not supported */ + default: + return -EINVAL; + } + mii_set_media(dev); + } + return 0; +} + +static u32 rio_get_link(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return np->link_status; +} + +static const struct ethtool_ops ethtool_ops = { + .get_drvinfo = rio_get_drvinfo, + .get_settings = rio_get_settings, + .set_settings = rio_set_settings, + .get_link = rio_get_link, +}; + +static int +rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) +{ + int phy_addr; + struct netdev_private *np = netdev_priv(dev); + struct mii_data *miidata = (struct mii_data *) &rq->ifr_ifru; + + struct netdev_desc *desc; + int i; + + phy_addr = np->phy_addr; + switch (cmd) { + case SIOCDEVPRIVATE: + break; + + case SIOCDEVPRIVATE + 1: + miidata->out_value = mii_read (dev, phy_addr, miidata->reg_num); + break; + case SIOCDEVPRIVATE + 2: + mii_write (dev, phy_addr, miidata->reg_num, miidata->in_value); + break; + case SIOCDEVPRIVATE + 3: + break; + case SIOCDEVPRIVATE + 4: + break; + case SIOCDEVPRIVATE + 5: + netif_stop_queue (dev); + break; + case SIOCDEVPRIVATE + 6: + netif_wake_queue (dev); + break; + case SIOCDEVPRIVATE + 7: + printk + ("tx_full=%x cur_tx=%lx old_tx=%lx cur_rx=%lx old_rx=%lx\n", + netif_queue_stopped(dev), np->cur_tx, np->old_tx, np->cur_rx, + np->old_rx); + break; + case SIOCDEVPRIVATE + 8: + printk("TX ring:\n"); + for (i = 0; i < TX_RING_SIZE; i++) { + desc = &np->tx_ring[i]; + printk + ("%02x:cur:%08x next:%08x status:%08x frag1:%08x frag0:%08x", + i, + (u32) (np->tx_ring_dma + i * sizeof (*desc)), + (u32)le64_to_cpu(desc->next_desc), + (u32)le64_to_cpu(desc->status), + (u32)(le64_to_cpu(desc->fraginfo) >> 32), + (u32)le64_to_cpu(desc->fraginfo)); + printk ("\n"); + } + printk ("\n"); + break; + + default: + return -EOPNOTSUPP; + } + return 0; +} + +#define EEP_READ 0x0200 +#define EEP_BUSY 0x8000 +/* Read the EEPROM word */ +/* We use I/O instruction to read/write eeprom to avoid fail on some machines */ +static int +read_eeprom (long ioaddr, int eep_addr) +{ + int i = 1000; + outw (EEP_READ | (eep_addr & 0xff), ioaddr + EepromCtrl); + while (i-- > 0) { + if (!(inw (ioaddr + EepromCtrl) & EEP_BUSY)) { + return inw (ioaddr + EepromData); + } + } + return 0; +} + +enum phy_ctrl_bits { + MII_READ = 0x00, MII_CLK = 0x01, MII_DATA1 = 0x02, MII_WRITE = 0x04, + MII_DUPLEX = 0x08, +}; + +#define mii_delay() readb(ioaddr) +static void +mii_sendbit (struct net_device *dev, u32 data) +{ + long ioaddr = dev->base_addr + PhyCtrl; + data = (data) ? MII_DATA1 : 0; + data |= MII_WRITE; + data |= (readb (ioaddr) & 0xf8) | MII_WRITE; + writeb (data, ioaddr); + mii_delay (); + writeb (data | MII_CLK, ioaddr); + mii_delay (); +} + +static int +mii_getbit (struct net_device *dev) +{ + long ioaddr = dev->base_addr + PhyCtrl; + u8 data; + + data = (readb (ioaddr) & 0xf8) | MII_READ; + writeb (data, ioaddr); + mii_delay (); + writeb (data | MII_CLK, ioaddr); + mii_delay (); + return ((readb (ioaddr) >> 1) & 1); +} + +static void +mii_send_bits (struct net_device *dev, u32 data, int len) +{ + int i; + for (i = len - 1; i >= 0; i--) { + mii_sendbit (dev, data & (1 << i)); + } +} + +static int +mii_read (struct net_device *dev, int phy_addr, int reg_num) +{ + u32 cmd; + int i; + u32 retval = 0; + + /* Preamble */ + mii_send_bits (dev, 0xffffffff, 32); + /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ + /* ST,OP = 0110'b for read operation */ + cmd = (0x06 << 10 | phy_addr << 5 | reg_num); + mii_send_bits (dev, cmd, 14); + /* Turnaround */ + if (mii_getbit (dev)) + goto err_out; + /* Read data */ + for (i = 0; i < 16; i++) { + retval |= mii_getbit (dev); + retval <<= 1; + } + /* End cycle */ + mii_getbit (dev); + return (retval >> 1) & 0xffff; + + err_out: + return 0; +} +static int +mii_write (struct net_device *dev, int phy_addr, int reg_num, u16 data) +{ + u32 cmd; + + /* Preamble */ + mii_send_bits (dev, 0xffffffff, 32); + /* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */ + /* ST,OP,AAAAA,RRRRR,TA = 0101xxxxxxxxxx10'b = 0x5002 for write */ + cmd = (0x5002 << 16) | (phy_addr << 23) | (reg_num << 18) | data; + mii_send_bits (dev, cmd, 32); + /* End cycle */ + mii_getbit (dev); + return 0; +} +static int +mii_wait_link (struct net_device *dev, int wait) +{ + __u16 bmsr; + int phy_addr; + struct netdev_private *np; + + np = netdev_priv(dev); + phy_addr = np->phy_addr; + + do { + bmsr = mii_read (dev, phy_addr, MII_BMSR); + if (bmsr & MII_BMSR_LINK_STATUS) + return 0; + mdelay (1); + } while (--wait > 0); + return -1; +} +static int +mii_get_media (struct net_device *dev) +{ + __u16 negotiate; + __u16 bmsr; + __u16 mscr; + __u16 mssr; + int phy_addr; + struct netdev_private *np; + + np = netdev_priv(dev); + phy_addr = np->phy_addr; + + bmsr = mii_read (dev, phy_addr, MII_BMSR); + if (np->an_enable) { + if (!(bmsr & MII_BMSR_AN_COMPLETE)) { + /* Auto-Negotiation not completed */ + return -1; + } + negotiate = mii_read (dev, phy_addr, MII_ANAR) & + mii_read (dev, phy_addr, MII_ANLPAR); + mscr = mii_read (dev, phy_addr, MII_MSCR); + mssr = mii_read (dev, phy_addr, MII_MSSR); + if (mscr & MII_MSCR_1000BT_FD && mssr & MII_MSSR_LP_1000BT_FD) { + np->speed = 1000; + np->full_duplex = 1; + printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n"); + } else if (mscr & MII_MSCR_1000BT_HD && mssr & MII_MSSR_LP_1000BT_HD) { + np->speed = 1000; + np->full_duplex = 0; + printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n"); + } else if (negotiate & MII_ANAR_100BX_FD) { + np->speed = 100; + np->full_duplex = 1; + printk (KERN_INFO "Auto 100 Mbps, Full duplex\n"); + } else if (negotiate & MII_ANAR_100BX_HD) { + np->speed = 100; + np->full_duplex = 0; + printk (KERN_INFO "Auto 100 Mbps, Half duplex\n"); + } else if (negotiate & MII_ANAR_10BT_FD) { + np->speed = 10; + np->full_duplex = 1; + printk (KERN_INFO "Auto 10 Mbps, Full duplex\n"); + } else if (negotiate & MII_ANAR_10BT_HD) { + np->speed = 10; + np->full_duplex = 0; + printk (KERN_INFO "Auto 10 Mbps, Half duplex\n"); + } + if (negotiate & MII_ANAR_PAUSE) { + np->tx_flow &= 1; + np->rx_flow &= 1; + } else if (negotiate & MII_ANAR_ASYMMETRIC) { + np->tx_flow = 0; + np->rx_flow &= 1; + } + /* else tx_flow, rx_flow = user select */ + } else { + __u16 bmcr = mii_read (dev, phy_addr, MII_BMCR); + switch (bmcr & (MII_BMCR_SPEED_100 | MII_BMCR_SPEED_1000)) { + case MII_BMCR_SPEED_1000: + printk (KERN_INFO "Operating at 1000 Mbps, "); + break; + case MII_BMCR_SPEED_100: + printk (KERN_INFO "Operating at 100 Mbps, "); + break; + case 0: + printk (KERN_INFO "Operating at 10 Mbps, "); + } + if (bmcr & MII_BMCR_DUPLEX_MODE) { + printk (KERN_CONT "Full duplex\n"); + } else { + printk (KERN_CONT "Half duplex\n"); + } + } + if (np->tx_flow) + printk(KERN_INFO "Enable Tx Flow Control\n"); + else + printk(KERN_INFO "Disable Tx Flow Control\n"); + if (np->rx_flow) + printk(KERN_INFO "Enable Rx Flow Control\n"); + else + printk(KERN_INFO "Disable Rx Flow Control\n"); + + return 0; +} + +static int +mii_set_media (struct net_device *dev) +{ + __u16 pscr; + __u16 bmcr; + __u16 bmsr; + __u16 anar; + int phy_addr; + struct netdev_private *np; + np = netdev_priv(dev); + phy_addr = np->phy_addr; + + /* Does user set speed? */ + if (np->an_enable) { + /* Advertise capabilities */ + bmsr = mii_read (dev, phy_addr, MII_BMSR); + anar = mii_read (dev, phy_addr, MII_ANAR) & + ~MII_ANAR_100BX_FD & + ~MII_ANAR_100BX_HD & + ~MII_ANAR_100BT4 & + ~MII_ANAR_10BT_FD & + ~MII_ANAR_10BT_HD; + if (bmsr & MII_BMSR_100BX_FD) + anar |= MII_ANAR_100BX_FD; + if (bmsr & MII_BMSR_100BX_HD) + anar |= MII_ANAR_100BX_HD; + if (bmsr & MII_BMSR_100BT4) + anar |= MII_ANAR_100BT4; + if (bmsr & MII_BMSR_10BT_FD) + anar |= MII_ANAR_10BT_FD; + if (bmsr & MII_BMSR_10BT_HD) + anar |= MII_ANAR_10BT_HD; + anar |= MII_ANAR_PAUSE | MII_ANAR_ASYMMETRIC; + mii_write (dev, phy_addr, MII_ANAR, anar); + + /* Enable Auto crossover */ + pscr = mii_read (dev, phy_addr, MII_PHY_SCR); + pscr |= 3 << 5; /* 11'b */ + mii_write (dev, phy_addr, MII_PHY_SCR, pscr); + + /* Soft reset PHY */ + mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET); + bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN | MII_BMCR_RESET; + mii_write (dev, phy_addr, MII_BMCR, bmcr); + mdelay(1); + } else { + /* Force speed setting */ + /* 1) Disable Auto crossover */ + pscr = mii_read (dev, phy_addr, MII_PHY_SCR); + pscr &= ~(3 << 5); + mii_write (dev, phy_addr, MII_PHY_SCR, pscr); + + /* 2) PHY Reset */ + bmcr = mii_read (dev, phy_addr, MII_BMCR); + bmcr |= MII_BMCR_RESET; + mii_write (dev, phy_addr, MII_BMCR, bmcr); + + /* 3) Power Down */ + bmcr = 0x1940; /* must be 0x1940 */ + mii_write (dev, phy_addr, MII_BMCR, bmcr); + mdelay (100); /* wait a certain time */ + + /* 4) Advertise nothing */ + mii_write (dev, phy_addr, MII_ANAR, 0); + + /* 5) Set media and Power Up */ + bmcr = MII_BMCR_POWER_DOWN; + if (np->speed == 100) { + bmcr |= MII_BMCR_SPEED_100; + printk (KERN_INFO "Manual 100 Mbps, "); + } else if (np->speed == 10) { + printk (KERN_INFO "Manual 10 Mbps, "); + } + if (np->full_duplex) { + bmcr |= MII_BMCR_DUPLEX_MODE; + printk (KERN_CONT "Full duplex\n"); + } else { + printk (KERN_CONT "Half duplex\n"); + } +#if 0 + /* Set 1000BaseT Master/Slave setting */ + mscr = mii_read (dev, phy_addr, MII_MSCR); + mscr |= MII_MSCR_CFG_ENABLE; + mscr &= ~MII_MSCR_CFG_VALUE = 0; +#endif + mii_write (dev, phy_addr, MII_BMCR, bmcr); + mdelay(10); + } + return 0; +} + +static int +mii_get_media_pcs (struct net_device *dev) +{ + __u16 negotiate; + __u16 bmsr; + int phy_addr; + struct netdev_private *np; + + np = netdev_priv(dev); + phy_addr = np->phy_addr; + + bmsr = mii_read (dev, phy_addr, PCS_BMSR); + if (np->an_enable) { + if (!(bmsr & MII_BMSR_AN_COMPLETE)) { + /* Auto-Negotiation not completed */ + return -1; + } + negotiate = mii_read (dev, phy_addr, PCS_ANAR) & + mii_read (dev, phy_addr, PCS_ANLPAR); + np->speed = 1000; + if (negotiate & PCS_ANAR_FULL_DUPLEX) { + printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n"); + np->full_duplex = 1; + } else { + printk (KERN_INFO "Auto 1000 Mbps, half duplex\n"); + np->full_duplex = 0; + } + if (negotiate & PCS_ANAR_PAUSE) { + np->tx_flow &= 1; + np->rx_flow &= 1; + } else if (negotiate & PCS_ANAR_ASYMMETRIC) { + np->tx_flow = 0; + np->rx_flow &= 1; + } + /* else tx_flow, rx_flow = user select */ + } else { + __u16 bmcr = mii_read (dev, phy_addr, PCS_BMCR); + printk (KERN_INFO "Operating at 1000 Mbps, "); + if (bmcr & MII_BMCR_DUPLEX_MODE) { + printk (KERN_CONT "Full duplex\n"); + } else { + printk (KERN_CONT "Half duplex\n"); + } + } + if (np->tx_flow) + printk(KERN_INFO "Enable Tx Flow Control\n"); + else + printk(KERN_INFO "Disable Tx Flow Control\n"); + if (np->rx_flow) + printk(KERN_INFO "Enable Rx Flow Control\n"); + else + printk(KERN_INFO "Disable Rx Flow Control\n"); + + return 0; +} + +static int +mii_set_media_pcs (struct net_device *dev) +{ + __u16 bmcr; + __u16 esr; + __u16 anar; + int phy_addr; + struct netdev_private *np; + np = netdev_priv(dev); + phy_addr = np->phy_addr; + + /* Auto-Negotiation? */ + if (np->an_enable) { + /* Advertise capabilities */ + esr = mii_read (dev, phy_addr, PCS_ESR); + anar = mii_read (dev, phy_addr, MII_ANAR) & + ~PCS_ANAR_HALF_DUPLEX & + ~PCS_ANAR_FULL_DUPLEX; + if (esr & (MII_ESR_1000BT_HD | MII_ESR_1000BX_HD)) + anar |= PCS_ANAR_HALF_DUPLEX; + if (esr & (MII_ESR_1000BT_FD | MII_ESR_1000BX_FD)) + anar |= PCS_ANAR_FULL_DUPLEX; + anar |= PCS_ANAR_PAUSE | PCS_ANAR_ASYMMETRIC; + mii_write (dev, phy_addr, MII_ANAR, anar); + + /* Soft reset PHY */ + mii_write (dev, phy_addr, MII_BMCR, MII_BMCR_RESET); + bmcr = MII_BMCR_AN_ENABLE | MII_BMCR_RESTART_AN | + MII_BMCR_RESET; + mii_write (dev, phy_addr, MII_BMCR, bmcr); + mdelay(1); + } else { + /* Force speed setting */ + /* PHY Reset */ + bmcr = MII_BMCR_RESET; + mii_write (dev, phy_addr, MII_BMCR, bmcr); + mdelay(10); + if (np->full_duplex) { + bmcr = MII_BMCR_DUPLEX_MODE; + printk (KERN_INFO "Manual full duplex\n"); + } else { + bmcr = 0; + printk (KERN_INFO "Manual half duplex\n"); + } + mii_write (dev, phy_addr, MII_BMCR, bmcr); + mdelay(10); + + /* Advertise nothing */ + mii_write (dev, phy_addr, MII_ANAR, 0); + } + return 0; +} + + +static int +rio_close (struct net_device *dev) +{ + long ioaddr = dev->base_addr; + struct netdev_private *np = netdev_priv(dev); + struct sk_buff *skb; + int i; + + netif_stop_queue (dev); + + /* Disable interrupts */ + writew (0, ioaddr + IntEnable); + + /* Stop Tx and Rx logics */ + writel (TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl); + + free_irq (dev->irq, dev); + del_timer_sync (&np->timer); + + /* Free all the skbuffs in the queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + skb = np->rx_skbuff[i]; + if (skb) { + pci_unmap_single(np->pdev, + desc_to_dma(&np->rx_ring[i]), + skb->len, PCI_DMA_FROMDEVICE); + dev_kfree_skb (skb); + np->rx_skbuff[i] = NULL; + } + np->rx_ring[i].status = 0; + np->rx_ring[i].fraginfo = 0; + } + for (i = 0; i < TX_RING_SIZE; i++) { + skb = np->tx_skbuff[i]; + if (skb) { + pci_unmap_single(np->pdev, + desc_to_dma(&np->tx_ring[i]), + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb (skb); + np->tx_skbuff[i] = NULL; + } + } + + return 0; +} + +static void __devexit +rio_remove1 (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata (pdev); + + if (dev) { + struct netdev_private *np = netdev_priv(dev); + + unregister_netdev (dev); + pci_free_consistent (pdev, RX_TOTAL_SIZE, np->rx_ring, + np->rx_ring_dma); + pci_free_consistent (pdev, TX_TOTAL_SIZE, np->tx_ring, + np->tx_ring_dma); +#ifdef MEM_MAPPING + iounmap ((char *) (dev->base_addr)); +#endif + free_netdev (dev); + pci_release_regions (pdev); + pci_disable_device (pdev); + } + pci_set_drvdata (pdev, NULL); +} + +static struct pci_driver rio_driver = { + .name = "dl2k", + .id_table = rio_pci_tbl, + .probe = rio_probe1, + .remove = __devexit_p(rio_remove1), +}; + +static int __init +rio_init (void) +{ + return pci_register_driver(&rio_driver); +} + +static void __exit +rio_exit (void) +{ + pci_unregister_driver (&rio_driver); +} + +module_init (rio_init); +module_exit (rio_exit); + +/* + +Compile command: + +gcc -D__KERNEL__ -DMODULE -I/usr/src/linux/include -Wall -Wstrict-prototypes -O2 -c dl2k.c + +Read Documentation/networking/dl2k.txt for details. + +*/ + diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h new file mode 100644 index 000000000000..7caab3d26a9e --- /dev/null +++ b/drivers/net/ethernet/dlink/dl2k.h @@ -0,0 +1,554 @@ +/* D-Link DL2000-based Gigabit Ethernet Adapter Linux driver */ +/* + Copyright (c) 2001, 2002 by D-Link Corporation + Written by Edward Peng. + Created 03-May-2001, base on Linux' sundance.c. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. +*/ + +#ifndef __DL2K_H__ +#define __DL2K_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* Processor type for cache alignment. */ +#include +#include +#include +#include +#include +#define TX_RING_SIZE 256 +#define TX_QUEUE_LEN (TX_RING_SIZE - 1) /* Limit ring entries actually used.*/ +#define RX_RING_SIZE 256 +#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct netdev_desc) +#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct netdev_desc) + +/* This driver was written to use PCI memory space, however x86-oriented + hardware often uses I/O space accesses. */ +#ifndef MEM_MAPPING +#undef readb +#undef readw +#undef readl +#undef writeb +#undef writew +#undef writel +#define readb inb +#define readw inw +#define readl inl +#define writeb outb +#define writew outw +#define writel outl +#endif + +/* Offsets to the device registers. + Unlike software-only systems, device drivers interact with complex hardware. + It's not useful to define symbolic names for every register bit in the + device. The name can only partially document the semantics and make + the driver longer and more difficult to read. + In general, only the important configuration values or bits changed + multiple times should be defined symbolically. +*/ +enum dl2x_offsets { + /* I/O register offsets */ + DMACtrl = 0x00, + RxDMAStatus = 0x08, + TFDListPtr0 = 0x10, + TFDListPtr1 = 0x14, + TxDMABurstThresh = 0x18, + TxDMAUrgentThresh = 0x19, + TxDMAPollPeriod = 0x1a, + RFDListPtr0 = 0x1c, + RFDListPtr1 = 0x20, + RxDMABurstThresh = 0x24, + RxDMAUrgentThresh = 0x25, + RxDMAPollPeriod = 0x26, + RxDMAIntCtrl = 0x28, + DebugCtrl = 0x2c, + ASICCtrl = 0x30, + FifoCtrl = 0x38, + RxEarlyThresh = 0x3a, + FlowOffThresh = 0x3c, + FlowOnThresh = 0x3e, + TxStartThresh = 0x44, + EepromData = 0x48, + EepromCtrl = 0x4a, + ExpromAddr = 0x4c, + Exprodata = 0x50, + WakeEvent = 0x51, + CountDown = 0x54, + IntStatusAck = 0x5a, + IntEnable = 0x5c, + IntStatus = 0x5e, + TxStatus = 0x60, + MACCtrl = 0x6c, + VLANTag = 0x70, + PhyCtrl = 0x76, + StationAddr0 = 0x78, + StationAddr1 = 0x7a, + StationAddr2 = 0x7c, + VLANId = 0x80, + MaxFrameSize = 0x86, + ReceiveMode = 0x88, + HashTable0 = 0x8c, + HashTable1 = 0x90, + RmonStatMask = 0x98, + StatMask = 0x9c, + RxJumboFrames = 0xbc, + TCPCheckSumErrors = 0xc0, + IPCheckSumErrors = 0xc2, + UDPCheckSumErrors = 0xc4, + TxJumboFrames = 0xf4, + /* Ethernet MIB statistic register offsets */ + OctetRcvOk = 0xa8, + McstOctetRcvOk = 0xac, + BcstOctetRcvOk = 0xb0, + FramesRcvOk = 0xb4, + McstFramesRcvdOk = 0xb8, + BcstFramesRcvdOk = 0xbe, + MacControlFramesRcvd = 0xc6, + FrameTooLongErrors = 0xc8, + InRangeLengthErrors = 0xca, + FramesCheckSeqErrors = 0xcc, + FramesLostRxErrors = 0xce, + OctetXmtOk = 0xd0, + McstOctetXmtOk = 0xd4, + BcstOctetXmtOk = 0xd8, + FramesXmtOk = 0xdc, + McstFramesXmtdOk = 0xe0, + FramesWDeferredXmt = 0xe4, + LateCollisions = 0xe8, + MultiColFrames = 0xec, + SingleColFrames = 0xf0, + BcstFramesXmtdOk = 0xf6, + CarrierSenseErrors = 0xf8, + MacControlFramesXmtd = 0xfa, + FramesAbortXSColls = 0xfc, + FramesWEXDeferal = 0xfe, + /* RMON statistic register offsets */ + EtherStatsCollisions = 0x100, + EtherStatsOctetsTransmit = 0x104, + EtherStatsPktsTransmit = 0x108, + EtherStatsPkts64OctetTransmit = 0x10c, + EtherStats65to127OctetsTransmit = 0x110, + EtherStatsPkts128to255OctetsTransmit = 0x114, + EtherStatsPkts256to511OctetsTransmit = 0x118, + EtherStatsPkts512to1023OctetsTransmit = 0x11c, + EtherStatsPkts1024to1518OctetsTransmit = 0x120, + EtherStatsCRCAlignErrors = 0x124, + EtherStatsUndersizePkts = 0x128, + EtherStatsFragments = 0x12c, + EtherStatsJabbers = 0x130, + EtherStatsOctets = 0x134, + EtherStatsPkts = 0x138, + EtherStats64Octets = 0x13c, + EtherStatsPkts65to127Octets = 0x140, + EtherStatsPkts128to255Octets = 0x144, + EtherStatsPkts256to511Octets = 0x148, + EtherStatsPkts512to1023Octets = 0x14c, + EtherStatsPkts1024to1518Octets = 0x150, +}; + +/* Bits in the interrupt status/mask registers. */ +enum IntStatus_bits { + InterruptStatus = 0x0001, + HostError = 0x0002, + MACCtrlFrame = 0x0008, + TxComplete = 0x0004, + RxComplete = 0x0010, + RxEarly = 0x0020, + IntRequested = 0x0040, + UpdateStats = 0x0080, + LinkEvent = 0x0100, + TxDMAComplete = 0x0200, + RxDMAComplete = 0x0400, + RFDListEnd = 0x0800, + RxDMAPriority = 0x1000, +}; + +/* Bits in the ReceiveMode register. */ +enum ReceiveMode_bits { + ReceiveUnicast = 0x0001, + ReceiveMulticast = 0x0002, + ReceiveBroadcast = 0x0004, + ReceiveAllFrames = 0x0008, + ReceiveMulticastHash = 0x0010, + ReceiveIPMulticast = 0x0020, + ReceiveVLANMatch = 0x0100, + ReceiveVLANHash = 0x0200, +}; +/* Bits in MACCtrl. */ +enum MACCtrl_bits { + DuplexSelect = 0x20, + TxFlowControlEnable = 0x80, + RxFlowControlEnable = 0x0100, + RcvFCS = 0x200, + AutoVLANtagging = 0x1000, + AutoVLANuntagging = 0x2000, + StatsEnable = 0x00200000, + StatsDisable = 0x00400000, + StatsEnabled = 0x00800000, + TxEnable = 0x01000000, + TxDisable = 0x02000000, + TxEnabled = 0x04000000, + RxEnable = 0x08000000, + RxDisable = 0x10000000, + RxEnabled = 0x20000000, +}; + +enum ASICCtrl_LoWord_bits { + PhyMedia = 0x0080, +}; + +enum ASICCtrl_HiWord_bits { + GlobalReset = 0x0001, + RxReset = 0x0002, + TxReset = 0x0004, + DMAReset = 0x0008, + FIFOReset = 0x0010, + NetworkReset = 0x0020, + HostReset = 0x0040, + ResetBusy = 0x0400, +}; + +/* Transmit Frame Control bits */ +enum TFC_bits { + DwordAlign = 0x00000000, + WordAlignDisable = 0x00030000, + WordAlign = 0x00020000, + TCPChecksumEnable = 0x00040000, + UDPChecksumEnable = 0x00080000, + IPChecksumEnable = 0x00100000, + FCSAppendDisable = 0x00200000, + TxIndicate = 0x00400000, + TxDMAIndicate = 0x00800000, + FragCountShift = 24, + VLANTagInsert = 0x0000000010000000, + TFDDone = 0x80000000, + VIDShift = 32, + UsePriorityShift = 48, +}; + +/* Receive Frames Status bits */ +enum RFS_bits { + RxFIFOOverrun = 0x00010000, + RxRuntFrame = 0x00020000, + RxAlignmentError = 0x00040000, + RxFCSError = 0x00080000, + RxOverSizedFrame = 0x00100000, + RxLengthError = 0x00200000, + VLANDetected = 0x00400000, + TCPDetected = 0x00800000, + TCPError = 0x01000000, + UDPDetected = 0x02000000, + UDPError = 0x04000000, + IPDetected = 0x08000000, + IPError = 0x10000000, + FrameStart = 0x20000000, + FrameEnd = 0x40000000, + RFDDone = 0x80000000, + TCIShift = 32, + RFS_Errors = 0x003f0000, +}; + +#define MII_RESET_TIME_OUT 10000 +/* MII register */ +enum _mii_reg { + MII_BMCR = 0, + MII_BMSR = 1, + MII_PHY_ID1 = 2, + MII_PHY_ID2 = 3, + MII_ANAR = 4, + MII_ANLPAR = 5, + MII_ANER = 6, + MII_ANNPT = 7, + MII_ANLPRNP = 8, + MII_MSCR = 9, + MII_MSSR = 10, + MII_ESR = 15, + MII_PHY_SCR = 16, +}; +/* PCS register */ +enum _pcs_reg { + PCS_BMCR = 0, + PCS_BMSR = 1, + PCS_ANAR = 4, + PCS_ANLPAR = 5, + PCS_ANER = 6, + PCS_ANNPT = 7, + PCS_ANLPRNP = 8, + PCS_ESR = 15, +}; + +/* Basic Mode Control Register */ +enum _mii_bmcr { + MII_BMCR_RESET = 0x8000, + MII_BMCR_LOOP_BACK = 0x4000, + MII_BMCR_SPEED_LSB = 0x2000, + MII_BMCR_AN_ENABLE = 0x1000, + MII_BMCR_POWER_DOWN = 0x0800, + MII_BMCR_ISOLATE = 0x0400, + MII_BMCR_RESTART_AN = 0x0200, + MII_BMCR_DUPLEX_MODE = 0x0100, + MII_BMCR_COL_TEST = 0x0080, + MII_BMCR_SPEED_MSB = 0x0040, + MII_BMCR_SPEED_RESERVED = 0x003f, + MII_BMCR_SPEED_10 = 0, + MII_BMCR_SPEED_100 = MII_BMCR_SPEED_LSB, + MII_BMCR_SPEED_1000 = MII_BMCR_SPEED_MSB, +}; + +/* Basic Mode Status Register */ +enum _mii_bmsr { + MII_BMSR_100BT4 = 0x8000, + MII_BMSR_100BX_FD = 0x4000, + MII_BMSR_100BX_HD = 0x2000, + MII_BMSR_10BT_FD = 0x1000, + MII_BMSR_10BT_HD = 0x0800, + MII_BMSR_100BT2_FD = 0x0400, + MII_BMSR_100BT2_HD = 0x0200, + MII_BMSR_EXT_STATUS = 0x0100, + MII_BMSR_PREAMBLE_SUPP = 0x0040, + MII_BMSR_AN_COMPLETE = 0x0020, + MII_BMSR_REMOTE_FAULT = 0x0010, + MII_BMSR_AN_ABILITY = 0x0008, + MII_BMSR_LINK_STATUS = 0x0004, + MII_BMSR_JABBER_DETECT = 0x0002, + MII_BMSR_EXT_CAP = 0x0001, +}; + +/* ANAR */ +enum _mii_anar { + MII_ANAR_NEXT_PAGE = 0x8000, + MII_ANAR_REMOTE_FAULT = 0x4000, + MII_ANAR_ASYMMETRIC = 0x0800, + MII_ANAR_PAUSE = 0x0400, + MII_ANAR_100BT4 = 0x0200, + MII_ANAR_100BX_FD = 0x0100, + MII_ANAR_100BX_HD = 0x0080, + MII_ANAR_10BT_FD = 0x0020, + MII_ANAR_10BT_HD = 0x0010, + MII_ANAR_SELECTOR = 0x001f, + MII_IEEE8023_CSMACD = 0x0001, +}; + +/* ANLPAR */ +enum _mii_anlpar { + MII_ANLPAR_NEXT_PAGE = MII_ANAR_NEXT_PAGE, + MII_ANLPAR_REMOTE_FAULT = MII_ANAR_REMOTE_FAULT, + MII_ANLPAR_ASYMMETRIC = MII_ANAR_ASYMMETRIC, + MII_ANLPAR_PAUSE = MII_ANAR_PAUSE, + MII_ANLPAR_100BT4 = MII_ANAR_100BT4, + MII_ANLPAR_100BX_FD = MII_ANAR_100BX_FD, + MII_ANLPAR_100BX_HD = MII_ANAR_100BX_HD, + MII_ANLPAR_10BT_FD = MII_ANAR_10BT_FD, + MII_ANLPAR_10BT_HD = MII_ANAR_10BT_HD, + MII_ANLPAR_SELECTOR = MII_ANAR_SELECTOR, +}; + +/* Auto-Negotiation Expansion Register */ +enum _mii_aner { + MII_ANER_PAR_DETECT_FAULT = 0x0010, + MII_ANER_LP_NEXTPAGABLE = 0x0008, + MII_ANER_NETXTPAGABLE = 0x0004, + MII_ANER_PAGE_RECEIVED = 0x0002, + MII_ANER_LP_NEGOTIABLE = 0x0001, +}; + +/* MASTER-SLAVE Control Register */ +enum _mii_mscr { + MII_MSCR_TEST_MODE = 0xe000, + MII_MSCR_CFG_ENABLE = 0x1000, + MII_MSCR_CFG_VALUE = 0x0800, + MII_MSCR_PORT_VALUE = 0x0400, + MII_MSCR_1000BT_FD = 0x0200, + MII_MSCR_1000BT_HD = 0X0100, +}; + +/* MASTER-SLAVE Status Register */ +enum _mii_mssr { + MII_MSSR_CFG_FAULT = 0x8000, + MII_MSSR_CFG_RES = 0x4000, + MII_MSSR_LOCAL_RCV_STATUS = 0x2000, + MII_MSSR_REMOTE_RCVR = 0x1000, + MII_MSSR_LP_1000BT_FD = 0x0800, + MII_MSSR_LP_1000BT_HD = 0x0400, + MII_MSSR_IDLE_ERR_COUNT = 0x00ff, +}; + +/* IEEE Extened Status Register */ +enum _mii_esr { + MII_ESR_1000BX_FD = 0x8000, + MII_ESR_1000BX_HD = 0x4000, + MII_ESR_1000BT_FD = 0x2000, + MII_ESR_1000BT_HD = 0x1000, +}; +/* PHY Specific Control Register */ +#if 0 +typedef union t_MII_PHY_SCR { + u16 image; + struct { + u16 disable_jabber:1; // bit 0 + u16 polarity_reversal:1; // bit 1 + u16 SEQ_test:1; // bit 2 + u16 _bit_3:1; // bit 3 + u16 disable_CLK125:1; // bit 4 + u16 mdi_crossover_mode:2; // bit 6:5 + u16 enable_ext_dist:1; // bit 7 + u16 _bit_8_9:2; // bit 9:8 + u16 force_link:1; // bit 10 + u16 assert_CRS:1; // bit 11 + u16 rcv_fifo_depth:2; // bit 13:12 + u16 xmit_fifo_depth:2; // bit 15:14 + } bits; +} PHY_SCR_t, *PPHY_SCR_t; +#endif + +typedef enum t_MII_ADMIN_STATUS { + adm_reset, + adm_operational, + adm_loopback, + adm_power_down, + adm_isolate +} MII_ADMIN_t, *PMII_ADMIN_t; + +/* Physical Coding Sublayer Management (PCS) */ +/* PCS control and status registers bitmap as the same as MII */ +/* PCS Extended Status register bitmap as the same as MII */ +/* PCS ANAR */ +enum _pcs_anar { + PCS_ANAR_NEXT_PAGE = 0x8000, + PCS_ANAR_REMOTE_FAULT = 0x3000, + PCS_ANAR_ASYMMETRIC = 0x0100, + PCS_ANAR_PAUSE = 0x0080, + PCS_ANAR_HALF_DUPLEX = 0x0040, + PCS_ANAR_FULL_DUPLEX = 0x0020, +}; +/* PCS ANLPAR */ +enum _pcs_anlpar { + PCS_ANLPAR_NEXT_PAGE = PCS_ANAR_NEXT_PAGE, + PCS_ANLPAR_REMOTE_FAULT = PCS_ANAR_REMOTE_FAULT, + PCS_ANLPAR_ASYMMETRIC = PCS_ANAR_ASYMMETRIC, + PCS_ANLPAR_PAUSE = PCS_ANAR_PAUSE, + PCS_ANLPAR_HALF_DUPLEX = PCS_ANAR_HALF_DUPLEX, + PCS_ANLPAR_FULL_DUPLEX = PCS_ANAR_FULL_DUPLEX, +}; + +typedef struct t_SROM { + u16 config_param; /* 0x00 */ + u16 asic_ctrl; /* 0x02 */ + u16 sub_vendor_id; /* 0x04 */ + u16 sub_system_id; /* 0x06 */ + u16 reserved1[12]; /* 0x08-0x1f */ + u8 mac_addr[6]; /* 0x20-0x25 */ + u8 reserved2[10]; /* 0x26-0x2f */ + u8 sib[204]; /* 0x30-0xfb */ + u32 crc; /* 0xfc-0xff */ +} SROM_t, *PSROM_t; + +/* Ioctl custom data */ +struct ioctl_data { + char signature[10]; + int cmd; + int len; + char *data; +}; + +struct mii_data { + __u16 reserved; + __u16 reg_num; + __u16 in_value; + __u16 out_value; +}; + +/* The Rx and Tx buffer descriptors. */ +struct netdev_desc { + __le64 next_desc; + __le64 status; + __le64 fraginfo; +}; + +#define PRIV_ALIGN 15 /* Required alignment mask */ +/* Use __attribute__((aligned (L1_CACHE_BYTES))) to maintain alignment + within the structure. */ +struct netdev_private { + /* Descriptor rings first for alignment. */ + struct netdev_desc *rx_ring; + struct netdev_desc *tx_ring; + struct sk_buff *rx_skbuff[RX_RING_SIZE]; + struct sk_buff *tx_skbuff[TX_RING_SIZE]; + dma_addr_t tx_ring_dma; + dma_addr_t rx_ring_dma; + struct pci_dev *pdev; + spinlock_t tx_lock; + spinlock_t rx_lock; + struct net_device_stats stats; + unsigned int rx_buf_sz; /* Based on MTU+slack. */ + unsigned int speed; /* Operating speed */ + unsigned int vlan; /* VLAN Id */ + unsigned int chip_id; /* PCI table chip id */ + unsigned int rx_coalesce; /* Maximum frames each RxDMAComplete intr */ + unsigned int rx_timeout; /* Wait time between RxDMAComplete intr */ + unsigned int tx_coalesce; /* Maximum frames each tx interrupt */ + unsigned int full_duplex:1; /* Full-duplex operation requested. */ + unsigned int an_enable:2; /* Auto-Negotiated Enable */ + unsigned int jumbo:1; /* Jumbo frame enable */ + unsigned int coalesce:1; /* Rx coalescing enable */ + unsigned int tx_flow:1; /* Tx flow control enable */ + unsigned int rx_flow:1; /* Rx flow control enable */ + unsigned int phy_media:1; /* 1: fiber, 0: copper */ + unsigned int link_status:1; /* Current link status */ + struct netdev_desc *last_tx; /* Last Tx descriptor used. */ + unsigned long cur_rx, old_rx; /* Producer/consumer ring indices */ + unsigned long cur_tx, old_tx; + struct timer_list timer; + int wake_polarity; + char name[256]; /* net device description */ + u8 duplex_polarity; + u16 mcast_filter[4]; + u16 advertising; /* NWay media advertisement */ + u16 negotiate; /* Negotiated media */ + int phy_addr; /* PHY addresses. */ +}; + +/* The station address location in the EEPROM. */ +/* The struct pci_device_id consist of: + vendor, device Vendor and device ID to match (or PCI_ANY_ID) + subvendor, subdevice Subsystem vendor and device ID to match (or PCI_ANY_ID) + class Device class to match. The class_mask tells which bits + class_mask of the class are honored during the comparison. + driver_data Data private to the driver. +*/ + +static DEFINE_PCI_DEVICE_TABLE(rio_pci_tbl) = { + {0x1186, 0x4000, PCI_ANY_ID, PCI_ANY_ID, }, + {0x13f0, 0x1021, PCI_ANY_ID, PCI_ANY_ID, }, + { } +}; +MODULE_DEVICE_TABLE (pci, rio_pci_tbl); +#define TX_TIMEOUT (4*HZ) +#define PACKET_SIZE 1536 +#define MAX_JUMBO 8000 +#define RIO_IO_SIZE 340 +#define DEFAULT_RXC 5 +#define DEFAULT_RXT 750 +#define DEFAULT_TXC 1 +#define MAX_TXC 8 +#endif /* __DL2K_H__ */ diff --git a/drivers/net/ethernet/dlink/sundance.c b/drivers/net/ethernet/dlink/sundance.c new file mode 100644 index 000000000000..4793df843c24 --- /dev/null +++ b/drivers/net/ethernet/dlink/sundance.c @@ -0,0 +1,1940 @@ +/* sundance.c: A Linux device driver for the Sundance ST201 "Alta". */ +/* + Written 1999-2000 by Donald Becker. + + This software may be used and distributed according to the terms of + the GNU General Public License (GPL), incorporated herein by reference. + Drivers based on or derived from this code fall under the GPL and must + retain the authorship, copyright and license notice. This file is not + a complete program and may only be used when the entire operating + system is licensed under the GPL. + + The author may be reached as becker@scyld.com, or C/O + Scyld Computing Corporation + 410 Severn Ave., Suite 210 + Annapolis MD 21403 + + Support and updates available at + http://www.scyld.com/network/sundance.html + [link no longer provides useful info -jgarzik] + Archives of the mailing list are still available at + http://www.beowulf.org/pipermail/netdrivers/ + +*/ + +#define DRV_NAME "sundance" +#define DRV_VERSION "1.2" +#define DRV_RELDATE "11-Sep-2006" + + +/* The user-configurable values. + These may be modified when a driver module is loaded.*/ +static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ +/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). + Typical is a 64 element hash table based on the Ethernet CRC. */ +static const int multicast_filter_limit = 32; + +/* Set the copy breakpoint for the copy-only-tiny-frames scheme. + Setting to > 1518 effectively disables this feature. + This chip can receive into offset buffers, so the Alpha does not + need a copy-align. */ +static int rx_copybreak; +static int flowctrl=1; + +/* media[] specifies the media type the NIC operates at. + autosense Autosensing active media. + 10mbps_hd 10Mbps half duplex. + 10mbps_fd 10Mbps full duplex. + 100mbps_hd 100Mbps half duplex. + 100mbps_fd 100Mbps full duplex. + 0 Autosensing active media. + 1 10Mbps half duplex. + 2 10Mbps full duplex. + 3 100Mbps half duplex. + 4 100Mbps full duplex. +*/ +#define MAX_UNITS 8 +static char *media[MAX_UNITS]; + + +/* Operational parameters that are set at compile time. */ + +/* Keep the ring sizes a power of two for compile efficiency. + The compiler will convert '%'<2^N> into a bit mask. + Making the Tx ring too large decreases the effectiveness of channel + bonding and packet priority, and more than 128 requires modifying the + Tx error recovery. + Large receive rings merely waste memory. */ +#define TX_RING_SIZE 32 +#define TX_QUEUE_LEN (TX_RING_SIZE - 1) /* Limit ring entries actually used. */ +#define RX_RING_SIZE 64 +#define RX_BUDGET 32 +#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct netdev_desc) +#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct netdev_desc) + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (4*HZ) +#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ + +/* Include files, designed to support most kernel versions 2.0.0 and later. */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* Processor type for cache alignment. */ +#include +#include +#include +#include +#include +#include +#include + +/* These identify the driver base version and may not be removed. */ +static const char version[] __devinitconst = + KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE + " Written by Donald Becker\n"; + +MODULE_AUTHOR("Donald Becker "); +MODULE_DESCRIPTION("Sundance Alta Ethernet driver"); +MODULE_LICENSE("GPL"); + +module_param(debug, int, 0); +module_param(rx_copybreak, int, 0); +module_param_array(media, charp, NULL, 0); +module_param(flowctrl, int, 0); +MODULE_PARM_DESC(debug, "Sundance Alta debug level (0-5)"); +MODULE_PARM_DESC(rx_copybreak, "Sundance Alta copy breakpoint for copy-only-tiny-frames"); +MODULE_PARM_DESC(flowctrl, "Sundance Alta flow control [0|1]"); + +/* + Theory of Operation + +I. Board Compatibility + +This driver is designed for the Sundance Technologies "Alta" ST201 chip. + +II. Board-specific settings + +III. Driver operation + +IIIa. Ring buffers + +This driver uses two statically allocated fixed-size descriptor lists +formed into rings by a branch from the final descriptor to the beginning of +the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. +Some chips explicitly use only 2^N sized rings, while others use a +'next descriptor' pointer that the driver forms into rings. + +IIIb/c. Transmit/Receive Structure + +This driver uses a zero-copy receive and transmit scheme. +The driver allocates full frame size skbuffs for the Rx ring buffers at +open() time and passes the skb->data field to the chip as receive data +buffers. When an incoming frame is less than RX_COPYBREAK bytes long, +a fresh skbuff is allocated and the frame is copied to the new skbuff. +When the incoming frame is larger, the skbuff is passed directly up the +protocol stack. Buffers consumed this way are replaced by newly allocated +skbuffs in a later phase of receives. + +The RX_COPYBREAK value is chosen to trade-off the memory wasted by +using a full-sized skbuff for small frames vs. the copying costs of larger +frames. New boards are typically used in generously configured machines +and the underfilled buffers have negligible impact compared to the benefit of +a single allocation size, so the default value of zero results in never +copying packets. When copying is done, the cost is usually mitigated by using +a combined copy/checksum routine. Copying also preloads the cache, which is +most useful with small frames. + +A subtle aspect of the operation is that the IP header at offset 14 in an +ethernet frame isn't longword aligned for further processing. +Unaligned buffers are permitted by the Sundance hardware, so +frames are received into the skbuff at an offset of "+2", 16-byte aligning +the IP header. + +IIId. Synchronization + +The driver runs as two independent, single-threaded flows of control. One +is the send-packet routine, which enforces single-threaded use by the +dev->tbusy flag. The other thread is the interrupt handler, which is single +threaded by the hardware and interrupt handling software. + +The send packet thread has partial control over the Tx ring and 'dev->tbusy' +flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next +queue slot is empty, it clears the tbusy flag when finished otherwise it sets +the 'lp->tx_full' flag. + +The interrupt handler has exclusive control over the Rx ring and records stats +from the Tx ring. After reaping the stats, it marks the Tx queue entry as +empty by incrementing the dirty_tx mark. Iff the 'lp->tx_full' flag is set, it +clears both the tx_full and tbusy flags. + +IV. Notes + +IVb. References + +The Sundance ST201 datasheet, preliminary version. +The Kendin KS8723 datasheet, preliminary version. +The ICplus IP100 datasheet, preliminary version. +http://www.scyld.com/expert/100mbps.html +http://www.scyld.com/expert/NWay.html + +IVc. Errata + +*/ + +/* Work-around for Kendin chip bugs. */ +#ifndef CONFIG_SUNDANCE_MMIO +#define USE_IO_OPS 1 +#endif + +static DEFINE_PCI_DEVICE_TABLE(sundance_pci_tbl) = { + { 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 }, + { 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 }, + { 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 }, + { 0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3 }, + { 0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, + { 0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, + { 0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, + { } +}; +MODULE_DEVICE_TABLE(pci, sundance_pci_tbl); + +enum { + netdev_io_size = 128 +}; + +struct pci_id_info { + const char *name; +}; +static const struct pci_id_info pci_id_tbl[] __devinitdata = { + {"D-Link DFE-550TX FAST Ethernet Adapter"}, + {"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"}, + {"D-Link DFE-580TX 4 port Server Adapter"}, + {"D-Link DFE-530TXS FAST Ethernet Adapter"}, + {"D-Link DL10050-based FAST Ethernet Adapter"}, + {"Sundance Technology Alta"}, + {"IC Plus Corporation IP100A FAST Ethernet Adapter"}, + { } /* terminate list. */ +}; + +/* This driver was written to use PCI memory space, however x86-oriented + hardware often uses I/O space accesses. */ + +/* Offsets to the device registers. + Unlike software-only systems, device drivers interact with complex hardware. + It's not useful to define symbolic names for every register bit in the + device. The name can only partially document the semantics and make + the driver longer and more difficult to read. + In general, only the important configuration values or bits changed + multiple times should be defined symbolically. +*/ +enum alta_offsets { + DMACtrl = 0x00, + TxListPtr = 0x04, + TxDMABurstThresh = 0x08, + TxDMAUrgentThresh = 0x09, + TxDMAPollPeriod = 0x0a, + RxDMAStatus = 0x0c, + RxListPtr = 0x10, + DebugCtrl0 = 0x1a, + DebugCtrl1 = 0x1c, + RxDMABurstThresh = 0x14, + RxDMAUrgentThresh = 0x15, + RxDMAPollPeriod = 0x16, + LEDCtrl = 0x1a, + ASICCtrl = 0x30, + EEData = 0x34, + EECtrl = 0x36, + FlashAddr = 0x40, + FlashData = 0x44, + TxStatus = 0x46, + TxFrameId = 0x47, + DownCounter = 0x18, + IntrClear = 0x4a, + IntrEnable = 0x4c, + IntrStatus = 0x4e, + MACCtrl0 = 0x50, + MACCtrl1 = 0x52, + StationAddr = 0x54, + MaxFrameSize = 0x5A, + RxMode = 0x5c, + MIICtrl = 0x5e, + MulticastFilter0 = 0x60, + MulticastFilter1 = 0x64, + RxOctetsLow = 0x68, + RxOctetsHigh = 0x6a, + TxOctetsLow = 0x6c, + TxOctetsHigh = 0x6e, + TxFramesOK = 0x70, + RxFramesOK = 0x72, + StatsCarrierError = 0x74, + StatsLateColl = 0x75, + StatsMultiColl = 0x76, + StatsOneColl = 0x77, + StatsTxDefer = 0x78, + RxMissed = 0x79, + StatsTxXSDefer = 0x7a, + StatsTxAbort = 0x7b, + StatsBcastTx = 0x7c, + StatsBcastRx = 0x7d, + StatsMcastTx = 0x7e, + StatsMcastRx = 0x7f, + /* Aliased and bogus values! */ + RxStatus = 0x0c, +}; + +#define ASIC_HI_WORD(x) ((x) + 2) + +enum ASICCtrl_HiWord_bit { + GlobalReset = 0x0001, + RxReset = 0x0002, + TxReset = 0x0004, + DMAReset = 0x0008, + FIFOReset = 0x0010, + NetworkReset = 0x0020, + HostReset = 0x0040, + ResetBusy = 0x0400, +}; + +/* Bits in the interrupt status/mask registers. */ +enum intr_status_bits { + IntrSummary=0x0001, IntrPCIErr=0x0002, IntrMACCtrl=0x0008, + IntrTxDone=0x0004, IntrRxDone=0x0010, IntrRxStart=0x0020, + IntrDrvRqst=0x0040, + StatsMax=0x0080, LinkChange=0x0100, + IntrTxDMADone=0x0200, IntrRxDMADone=0x0400, +}; + +/* Bits in the RxMode register. */ +enum rx_mode_bits { + AcceptAllIPMulti=0x20, AcceptMultiHash=0x10, AcceptAll=0x08, + AcceptBroadcast=0x04, AcceptMulticast=0x02, AcceptMyPhys=0x01, +}; +/* Bits in MACCtrl. */ +enum mac_ctrl0_bits { + EnbFullDuplex=0x20, EnbRcvLargeFrame=0x40, + EnbFlowCtrl=0x100, EnbPassRxCRC=0x200, +}; +enum mac_ctrl1_bits { + StatsEnable=0x0020, StatsDisable=0x0040, StatsEnabled=0x0080, + TxEnable=0x0100, TxDisable=0x0200, TxEnabled=0x0400, + RxEnable=0x0800, RxDisable=0x1000, RxEnabled=0x2000, +}; + +/* The Rx and Tx buffer descriptors. */ +/* Note that using only 32 bit fields simplifies conversion to big-endian + architectures. */ +struct netdev_desc { + __le32 next_desc; + __le32 status; + struct desc_frag { __le32 addr, length; } frag[1]; +}; + +/* Bits in netdev_desc.status */ +enum desc_status_bits { + DescOwn=0x8000, + DescEndPacket=0x4000, + DescEndRing=0x2000, + LastFrag=0x80000000, + DescIntrOnTx=0x8000, + DescIntrOnDMADone=0x80000000, + DisableAlign = 0x00000001, +}; + +#define PRIV_ALIGN 15 /* Required alignment mask */ +/* Use __attribute__((aligned (L1_CACHE_BYTES))) to maintain alignment + within the structure. */ +#define MII_CNT 4 +struct netdev_private { + /* Descriptor rings first for alignment. */ + struct netdev_desc *rx_ring; + struct netdev_desc *tx_ring; + struct sk_buff* rx_skbuff[RX_RING_SIZE]; + struct sk_buff* tx_skbuff[TX_RING_SIZE]; + dma_addr_t tx_ring_dma; + dma_addr_t rx_ring_dma; + struct timer_list timer; /* Media monitoring timer. */ + /* ethtool extra stats */ + struct { + u64 tx_multiple_collisions; + u64 tx_single_collisions; + u64 tx_late_collisions; + u64 tx_deferred; + u64 tx_deferred_excessive; + u64 tx_aborted; + u64 tx_bcasts; + u64 rx_bcasts; + u64 tx_mcasts; + u64 rx_mcasts; + } xstats; + /* Frequently used values: keep some adjacent for cache effect. */ + spinlock_t lock; + int msg_enable; + int chip_id; + unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ + unsigned int rx_buf_sz; /* Based on MTU+slack. */ + struct netdev_desc *last_tx; /* Last Tx descriptor used. */ + unsigned int cur_tx, dirty_tx; + /* These values are keep track of the transceiver/media in use. */ + unsigned int flowctrl:1; + unsigned int default_port:4; /* Last dev->if_port value. */ + unsigned int an_enable:1; + unsigned int speed; + struct tasklet_struct rx_tasklet; + struct tasklet_struct tx_tasklet; + int budget; + int cur_task; + /* Multicast and receive mode. */ + spinlock_t mcastlock; /* SMP lock multicast updates. */ + u16 mcast_filter[4]; + /* MII transceiver section. */ + struct mii_if_info mii_if; + int mii_preamble_required; + unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */ + struct pci_dev *pci_dev; + void __iomem *base; + spinlock_t statlock; +}; + +/* The station address location in the EEPROM. */ +#define EEPROM_SA_OFFSET 0x10 +#define DEFAULT_INTR (IntrRxDMADone | IntrPCIErr | \ + IntrDrvRqst | IntrTxDone | StatsMax | \ + LinkChange) + +static int change_mtu(struct net_device *dev, int new_mtu); +static int eeprom_read(void __iomem *ioaddr, int location); +static int mdio_read(struct net_device *dev, int phy_id, int location); +static void mdio_write(struct net_device *dev, int phy_id, int location, int value); +static int mdio_wait_link(struct net_device *dev, int wait); +static int netdev_open(struct net_device *dev); +static void check_duplex(struct net_device *dev); +static void netdev_timer(unsigned long data); +static void tx_timeout(struct net_device *dev); +static void init_ring(struct net_device *dev); +static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); +static int reset_tx (struct net_device *dev); +static irqreturn_t intr_handler(int irq, void *dev_instance); +static void rx_poll(unsigned long data); +static void tx_poll(unsigned long data); +static void refill_rx (struct net_device *dev); +static void netdev_error(struct net_device *dev, int intr_status); +static void netdev_error(struct net_device *dev, int intr_status); +static void set_rx_mode(struct net_device *dev); +static int __set_mac_addr(struct net_device *dev); +static int sundance_set_mac_addr(struct net_device *dev, void *data); +static struct net_device_stats *get_stats(struct net_device *dev); +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int netdev_close(struct net_device *dev); +static const struct ethtool_ops ethtool_ops; + +static void sundance_reset(struct net_device *dev, unsigned long reset_cmd) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base + ASICCtrl; + int countdown; + + /* ST201 documentation states ASICCtrl is a 32bit register */ + iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr); + /* ST201 documentation states reset can take up to 1 ms */ + countdown = 10 + 1; + while (ioread32 (ioaddr) & (ResetBusy << 16)) { + if (--countdown == 0) { + printk(KERN_WARNING "%s : reset not completed !!\n", dev->name); + break; + } + udelay(100); + } +} + +static const struct net_device_ops netdev_ops = { + .ndo_open = netdev_open, + .ndo_stop = netdev_close, + .ndo_start_xmit = start_tx, + .ndo_get_stats = get_stats, + .ndo_set_multicast_list = set_rx_mode, + .ndo_do_ioctl = netdev_ioctl, + .ndo_tx_timeout = tx_timeout, + .ndo_change_mtu = change_mtu, + .ndo_set_mac_address = sundance_set_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +static int __devinit sundance_probe1 (struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev; + struct netdev_private *np; + static int card_idx; + int chip_idx = ent->driver_data; + int irq; + int i; + void __iomem *ioaddr; + u16 mii_ctl; + void *ring_space; + dma_addr_t ring_dma; +#ifdef USE_IO_OPS + int bar = 0; +#else + int bar = 1; +#endif + int phy, phy_end, phy_idx = 0; + +/* when built into the kernel, we only print version if device is found */ +#ifndef MODULE + static int printed_version; + if (!printed_version++) + printk(version); +#endif + + if (pci_enable_device(pdev)) + return -EIO; + pci_set_master(pdev); + + irq = pdev->irq; + + dev = alloc_etherdev(sizeof(*np)); + if (!dev) + return -ENOMEM; + SET_NETDEV_DEV(dev, &pdev->dev); + + if (pci_request_regions(pdev, DRV_NAME)) + goto err_out_netdev; + + ioaddr = pci_iomap(pdev, bar, netdev_io_size); + if (!ioaddr) + goto err_out_res; + + for (i = 0; i < 3; i++) + ((__le16 *)dev->dev_addr)[i] = + cpu_to_le16(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + + dev->base_addr = (unsigned long)ioaddr; + dev->irq = irq; + + np = netdev_priv(dev); + np->base = ioaddr; + np->pci_dev = pdev; + np->chip_id = chip_idx; + np->msg_enable = (1 << debug) - 1; + spin_lock_init(&np->lock); + spin_lock_init(&np->statlock); + tasklet_init(&np->rx_tasklet, rx_poll, (unsigned long)dev); + tasklet_init(&np->tx_tasklet, tx_poll, (unsigned long)dev); + + ring_space = dma_alloc_coherent(&pdev->dev, TX_TOTAL_SIZE, + &ring_dma, GFP_KERNEL); + if (!ring_space) + goto err_out_cleardev; + np->tx_ring = (struct netdev_desc *)ring_space; + np->tx_ring_dma = ring_dma; + + ring_space = dma_alloc_coherent(&pdev->dev, RX_TOTAL_SIZE, + &ring_dma, GFP_KERNEL); + if (!ring_space) + goto err_out_unmap_tx; + np->rx_ring = (struct netdev_desc *)ring_space; + np->rx_ring_dma = ring_dma; + + np->mii_if.dev = dev; + np->mii_if.mdio_read = mdio_read; + np->mii_if.mdio_write = mdio_write; + np->mii_if.phy_id_mask = 0x1f; + np->mii_if.reg_num_mask = 0x1f; + + /* The chip-specific entries in the device structure. */ + dev->netdev_ops = &netdev_ops; + SET_ETHTOOL_OPS(dev, ðtool_ops); + dev->watchdog_timeo = TX_TIMEOUT; + + pci_set_drvdata(pdev, dev); + + i = register_netdev(dev); + if (i) + goto err_out_unmap_rx; + + printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n", + dev->name, pci_id_tbl[chip_idx].name, ioaddr, + dev->dev_addr, irq); + + np->phys[0] = 1; /* Default setting */ + np->mii_preamble_required++; + + /* + * It seems some phys doesn't deal well with address 0 being accessed + * first + */ + if (sundance_pci_tbl[np->chip_id].device == 0x0200) { + phy = 0; + phy_end = 31; + } else { + phy = 1; + phy_end = 32; /* wraps to zero, due to 'phy & 0x1f' */ + } + for (; phy <= phy_end && phy_idx < MII_CNT; phy++) { + int phyx = phy & 0x1f; + int mii_status = mdio_read(dev, phyx, MII_BMSR); + if (mii_status != 0xffff && mii_status != 0x0000) { + np->phys[phy_idx++] = phyx; + np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE); + if ((mii_status & 0x0040) == 0) + np->mii_preamble_required++; + printk(KERN_INFO "%s: MII PHY found at address %d, status " + "0x%4.4x advertising %4.4x.\n", + dev->name, phyx, mii_status, np->mii_if.advertising); + } + } + np->mii_preamble_required--; + + if (phy_idx == 0) { + printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n", + dev->name, ioread32(ioaddr + ASICCtrl)); + goto err_out_unregister; + } + + np->mii_if.phy_id = np->phys[0]; + + /* Parse override configuration */ + np->an_enable = 1; + if (card_idx < MAX_UNITS) { + if (media[card_idx] != NULL) { + np->an_enable = 0; + if (strcmp (media[card_idx], "100mbps_fd") == 0 || + strcmp (media[card_idx], "4") == 0) { + np->speed = 100; + np->mii_if.full_duplex = 1; + } else if (strcmp (media[card_idx], "100mbps_hd") == 0 || + strcmp (media[card_idx], "3") == 0) { + np->speed = 100; + np->mii_if.full_duplex = 0; + } else if (strcmp (media[card_idx], "10mbps_fd") == 0 || + strcmp (media[card_idx], "2") == 0) { + np->speed = 10; + np->mii_if.full_duplex = 1; + } else if (strcmp (media[card_idx], "10mbps_hd") == 0 || + strcmp (media[card_idx], "1") == 0) { + np->speed = 10; + np->mii_if.full_duplex = 0; + } else { + np->an_enable = 1; + } + } + if (flowctrl == 1) + np->flowctrl = 1; + } + + /* Fibre PHY? */ + if (ioread32 (ioaddr + ASICCtrl) & 0x80) { + /* Default 100Mbps Full */ + if (np->an_enable) { + np->speed = 100; + np->mii_if.full_duplex = 1; + np->an_enable = 0; + } + } + /* Reset PHY */ + mdio_write (dev, np->phys[0], MII_BMCR, BMCR_RESET); + mdelay (300); + /* If flow control enabled, we need to advertise it.*/ + if (np->flowctrl) + mdio_write (dev, np->phys[0], MII_ADVERTISE, np->mii_if.advertising | 0x0400); + mdio_write (dev, np->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART); + /* Force media type */ + if (!np->an_enable) { + mii_ctl = 0; + mii_ctl |= (np->speed == 100) ? BMCR_SPEED100 : 0; + mii_ctl |= (np->mii_if.full_duplex) ? BMCR_FULLDPLX : 0; + mdio_write (dev, np->phys[0], MII_BMCR, mii_ctl); + printk (KERN_INFO "Override speed=%d, %s duplex\n", + np->speed, np->mii_if.full_duplex ? "Full" : "Half"); + + } + + /* Perhaps move the reset here? */ + /* Reset the chip to erase previous misconfiguration. */ + if (netif_msg_hw(np)) + printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl)); + sundance_reset(dev, 0x00ff << 16); + if (netif_msg_hw(np)) + printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl)); + + card_idx++; + return 0; + +err_out_unregister: + unregister_netdev(dev); +err_out_unmap_rx: + dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, + np->rx_ring, np->rx_ring_dma); +err_out_unmap_tx: + dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, + np->tx_ring, np->tx_ring_dma); +err_out_cleardev: + pci_set_drvdata(pdev, NULL); + pci_iounmap(pdev, ioaddr); +err_out_res: + pci_release_regions(pdev); +err_out_netdev: + free_netdev (dev); + return -ENODEV; +} + +static int change_mtu(struct net_device *dev, int new_mtu) +{ + if ((new_mtu < 68) || (new_mtu > 8191)) /* Set by RxDMAFrameLen */ + return -EINVAL; + if (netif_running(dev)) + return -EBUSY; + dev->mtu = new_mtu; + return 0; +} + +#define eeprom_delay(ee_addr) ioread32(ee_addr) +/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. */ +static int __devinit eeprom_read(void __iomem *ioaddr, int location) +{ + int boguscnt = 10000; /* Typical 1900 ticks. */ + iowrite16(0x0200 | (location & 0xff), ioaddr + EECtrl); + do { + eeprom_delay(ioaddr + EECtrl); + if (! (ioread16(ioaddr + EECtrl) & 0x8000)) { + return ioread16(ioaddr + EEData); + } + } while (--boguscnt > 0); + return 0; +} + +/* MII transceiver control section. + Read and write the MII registers using software-generated serial + MDIO protocol. See the MII specifications or DP83840A data sheet + for details. + + The maximum data clock rate is 2.5 Mhz. The minimum timing is usually + met by back-to-back 33Mhz PCI cycles. */ +#define mdio_delay() ioread8(mdio_addr) + +enum mii_reg_bits { + MDIO_ShiftClk=0x0001, MDIO_Data=0x0002, MDIO_EnbOutput=0x0004, +}; +#define MDIO_EnbIn (0) +#define MDIO_WRITE0 (MDIO_EnbOutput) +#define MDIO_WRITE1 (MDIO_Data | MDIO_EnbOutput) + +/* Generate the preamble required for initial synchronization and + a few older transceivers. */ +static void mdio_sync(void __iomem *mdio_addr) +{ + int bits = 32; + + /* Establish sync by sending at least 32 logic ones. */ + while (--bits >= 0) { + iowrite8(MDIO_WRITE1, mdio_addr); + mdio_delay(); + iowrite8(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr); + mdio_delay(); + } +} + +static int mdio_read(struct net_device *dev, int phy_id, int location) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *mdio_addr = np->base + MIICtrl; + int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; + int i, retval = 0; + + if (np->mii_preamble_required) + mdio_sync(mdio_addr); + + /* Shift the read command bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; + + iowrite8(dataval, mdio_addr); + mdio_delay(); + iowrite8(dataval | MDIO_ShiftClk, mdio_addr); + mdio_delay(); + } + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 19; i > 0; i--) { + iowrite8(MDIO_EnbIn, mdio_addr); + mdio_delay(); + retval = (retval << 1) | ((ioread8(mdio_addr) & MDIO_Data) ? 1 : 0); + iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); + mdio_delay(); + } + return (retval>>1) & 0xffff; +} + +static void mdio_write(struct net_device *dev, int phy_id, int location, int value) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *mdio_addr = np->base + MIICtrl; + int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value; + int i; + + if (np->mii_preamble_required) + mdio_sync(mdio_addr); + + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; + + iowrite8(dataval, mdio_addr); + mdio_delay(); + iowrite8(dataval | MDIO_ShiftClk, mdio_addr); + mdio_delay(); + } + /* Clear out extra bits. */ + for (i = 2; i > 0; i--) { + iowrite8(MDIO_EnbIn, mdio_addr); + mdio_delay(); + iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); + mdio_delay(); + } +} + +static int mdio_wait_link(struct net_device *dev, int wait) +{ + int bmsr; + int phy_id; + struct netdev_private *np; + + np = netdev_priv(dev); + phy_id = np->phys[0]; + + do { + bmsr = mdio_read(dev, phy_id, MII_BMSR); + if (bmsr & 0x0004) + return 0; + mdelay(1); + } while (--wait > 0); + return -1; +} + +static int netdev_open(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + unsigned long flags; + int i; + + /* Do we need to reset the chip??? */ + + i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev); + if (i) + return i; + + if (netif_msg_ifup(np)) + printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", + dev->name, dev->irq); + init_ring(dev); + + iowrite32(np->rx_ring_dma, ioaddr + RxListPtr); + /* The Tx list pointer is written as packets are queued. */ + + /* Initialize other registers. */ + __set_mac_addr(dev); +#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) + iowrite16(dev->mtu + 18, ioaddr + MaxFrameSize); +#else + iowrite16(dev->mtu + 14, ioaddr + MaxFrameSize); +#endif + if (dev->mtu > 2047) + iowrite32(ioread32(ioaddr + ASICCtrl) | 0x0C, ioaddr + ASICCtrl); + + /* Configure the PCI bus bursts and FIFO thresholds. */ + + if (dev->if_port == 0) + dev->if_port = np->default_port; + + spin_lock_init(&np->mcastlock); + + set_rx_mode(dev); + iowrite16(0, ioaddr + IntrEnable); + iowrite16(0, ioaddr + DownCounter); + /* Set the chip to poll every N*320nsec. */ + iowrite8(100, ioaddr + RxDMAPollPeriod); + iowrite8(127, ioaddr + TxDMAPollPeriod); + /* Fix DFE-580TX packet drop issue */ + if (np->pci_dev->revision >= 0x14) + iowrite8(0x01, ioaddr + DebugCtrl1); + netif_start_queue(dev); + + spin_lock_irqsave(&np->lock, flags); + reset_tx(dev); + spin_unlock_irqrestore(&np->lock, flags); + + iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); + + if (netif_msg_ifup(np)) + printk(KERN_DEBUG "%s: Done netdev_open(), status: Rx %x Tx %x " + "MAC Control %x, %4.4x %4.4x.\n", + dev->name, ioread32(ioaddr + RxStatus), ioread8(ioaddr + TxStatus), + ioread32(ioaddr + MACCtrl0), + ioread16(ioaddr + MACCtrl1), ioread16(ioaddr + MACCtrl0)); + + /* Set the timer to check for link beat. */ + init_timer(&np->timer); + np->timer.expires = jiffies + 3*HZ; + np->timer.data = (unsigned long)dev; + np->timer.function = netdev_timer; /* timer handler */ + add_timer(&np->timer); + + /* Enable interrupts by setting the interrupt mask. */ + iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); + + return 0; +} + +static void check_duplex(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + int mii_lpa = mdio_read(dev, np->phys[0], MII_LPA); + int negotiated = mii_lpa & np->mii_if.advertising; + int duplex; + + /* Force media */ + if (!np->an_enable || mii_lpa == 0xffff) { + if (np->mii_if.full_duplex) + iowrite16 (ioread16 (ioaddr + MACCtrl0) | EnbFullDuplex, + ioaddr + MACCtrl0); + return; + } + + /* Autonegotiation */ + duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040; + if (np->mii_if.full_duplex != duplex) { + np->mii_if.full_duplex = duplex; + if (netif_msg_link(np)) + printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d " + "negotiated capability %4.4x.\n", dev->name, + duplex ? "full" : "half", np->phys[0], negotiated); + iowrite16(ioread16(ioaddr + MACCtrl0) | (duplex ? 0x20 : 0), ioaddr + MACCtrl0); + } +} + +static void netdev_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + int next_tick = 10*HZ; + + if (netif_msg_timer(np)) { + printk(KERN_DEBUG "%s: Media selection timer tick, intr status %4.4x, " + "Tx %x Rx %x.\n", + dev->name, ioread16(ioaddr + IntrEnable), + ioread8(ioaddr + TxStatus), ioread32(ioaddr + RxStatus)); + } + check_duplex(dev); + np->timer.expires = jiffies + next_tick; + add_timer(&np->timer); +} + +static void tx_timeout(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + unsigned long flag; + + netif_stop_queue(dev); + tasklet_disable(&np->tx_tasklet); + iowrite16(0, ioaddr + IntrEnable); + printk(KERN_WARNING "%s: Transmit timed out, TxStatus %2.2x " + "TxFrameId %2.2x," + " resetting...\n", dev->name, ioread8(ioaddr + TxStatus), + ioread8(ioaddr + TxFrameId)); + + { + int i; + for (i=0; itx_ring_dma + i*sizeof(*np->tx_ring)), + le32_to_cpu(np->tx_ring[i].next_desc), + le32_to_cpu(np->tx_ring[i].status), + (le32_to_cpu(np->tx_ring[i].status) >> 2) & 0xff, + le32_to_cpu(np->tx_ring[i].frag[0].addr), + le32_to_cpu(np->tx_ring[i].frag[0].length)); + } + printk(KERN_DEBUG "TxListPtr=%08x netif_queue_stopped=%d\n", + ioread32(np->base + TxListPtr), + netif_queue_stopped(dev)); + printk(KERN_DEBUG "cur_tx=%d(%02x) dirty_tx=%d(%02x)\n", + np->cur_tx, np->cur_tx % TX_RING_SIZE, + np->dirty_tx, np->dirty_tx % TX_RING_SIZE); + printk(KERN_DEBUG "cur_rx=%d dirty_rx=%d\n", np->cur_rx, np->dirty_rx); + printk(KERN_DEBUG "cur_task=%d\n", np->cur_task); + } + spin_lock_irqsave(&np->lock, flag); + + /* Stop and restart the chip's Tx processes . */ + reset_tx(dev); + spin_unlock_irqrestore(&np->lock, flag); + + dev->if_port = 0; + + dev->trans_start = jiffies; /* prevent tx timeout */ + dev->stats.tx_errors++; + if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { + netif_wake_queue(dev); + } + iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); + tasklet_enable(&np->tx_tasklet); +} + + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void init_ring(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int i; + + np->cur_rx = np->cur_tx = 0; + np->dirty_rx = np->dirty_tx = 0; + np->cur_task = 0; + + np->rx_buf_sz = (dev->mtu <= 1520 ? PKT_BUF_SZ : dev->mtu + 16); + + /* Initialize all Rx descriptors. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].next_desc = cpu_to_le32(np->rx_ring_dma + + ((i+1)%RX_RING_SIZE)*sizeof(*np->rx_ring)); + np->rx_ring[i].status = 0; + np->rx_ring[i].frag[0].length = 0; + np->rx_skbuff[i] = NULL; + } + + /* Fill in the Rx buffers. Handle allocation failure gracefully. */ + for (i = 0; i < RX_RING_SIZE; i++) { + struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz + 2); + np->rx_skbuff[i] = skb; + if (skb == NULL) + break; + skb->dev = dev; /* Mark as being used by this device. */ + skb_reserve(skb, 2); /* 16 byte align the IP header. */ + np->rx_ring[i].frag[0].addr = cpu_to_le32( + dma_map_single(&np->pci_dev->dev, skb->data, + np->rx_buf_sz, DMA_FROM_DEVICE)); + if (dma_mapping_error(&np->pci_dev->dev, + np->rx_ring[i].frag[0].addr)) { + dev_kfree_skb(skb); + np->rx_skbuff[i] = NULL; + break; + } + np->rx_ring[i].frag[0].length = cpu_to_le32(np->rx_buf_sz | LastFrag); + } + np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); + + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_skbuff[i] = NULL; + np->tx_ring[i].status = 0; + } +} + +static void tx_poll (unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct netdev_private *np = netdev_priv(dev); + unsigned head = np->cur_task % TX_RING_SIZE; + struct netdev_desc *txdesc = + &np->tx_ring[(np->cur_tx - 1) % TX_RING_SIZE]; + + /* Chain the next pointer */ + for (; np->cur_tx - np->cur_task > 0; np->cur_task++) { + int entry = np->cur_task % TX_RING_SIZE; + txdesc = &np->tx_ring[entry]; + if (np->last_tx) { + np->last_tx->next_desc = cpu_to_le32(np->tx_ring_dma + + entry*sizeof(struct netdev_desc)); + } + np->last_tx = txdesc; + } + /* Indicate the latest descriptor of tx ring */ + txdesc->status |= cpu_to_le32(DescIntrOnTx); + + if (ioread32 (np->base + TxListPtr) == 0) + iowrite32 (np->tx_ring_dma + head * sizeof(struct netdev_desc), + np->base + TxListPtr); +} + +static netdev_tx_t +start_tx (struct sk_buff *skb, struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + struct netdev_desc *txdesc; + unsigned entry; + + /* Calculate the next Tx descriptor entry. */ + entry = np->cur_tx % TX_RING_SIZE; + np->tx_skbuff[entry] = skb; + txdesc = &np->tx_ring[entry]; + + txdesc->next_desc = 0; + txdesc->status = cpu_to_le32 ((entry << 2) | DisableAlign); + txdesc->frag[0].addr = cpu_to_le32(dma_map_single(&np->pci_dev->dev, + skb->data, skb->len, DMA_TO_DEVICE)); + if (dma_mapping_error(&np->pci_dev->dev, + txdesc->frag[0].addr)) + goto drop_frame; + txdesc->frag[0].length = cpu_to_le32 (skb->len | LastFrag); + + /* Increment cur_tx before tasklet_schedule() */ + np->cur_tx++; + mb(); + /* Schedule a tx_poll() task */ + tasklet_schedule(&np->tx_tasklet); + + /* On some architectures: explicitly flush cache lines here. */ + if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 1 && + !netif_queue_stopped(dev)) { + /* do nothing */ + } else { + netif_stop_queue (dev); + } + if (netif_msg_tx_queued(np)) { + printk (KERN_DEBUG + "%s: Transmit frame #%d queued in slot %d.\n", + dev->name, np->cur_tx, entry); + } + return NETDEV_TX_OK; + +drop_frame: + dev_kfree_skb(skb); + np->tx_skbuff[entry] = NULL; + dev->stats.tx_dropped++; + return NETDEV_TX_OK; +} + +/* Reset hardware tx and free all of tx buffers */ +static int +reset_tx (struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + struct sk_buff *skb; + int i; + + /* Reset tx logic, TxListPtr will be cleaned */ + iowrite16 (TxDisable, ioaddr + MACCtrl1); + sundance_reset(dev, (NetworkReset|FIFOReset|DMAReset|TxReset) << 16); + + /* free all tx skbuff */ + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_ring[i].next_desc = 0; + + skb = np->tx_skbuff[i]; + if (skb) { + dma_unmap_single(&np->pci_dev->dev, + le32_to_cpu(np->tx_ring[i].frag[0].addr), + skb->len, DMA_TO_DEVICE); + dev_kfree_skb_any(skb); + np->tx_skbuff[i] = NULL; + dev->stats.tx_dropped++; + } + } + np->cur_tx = np->dirty_tx = 0; + np->cur_task = 0; + + np->last_tx = NULL; + iowrite8(127, ioaddr + TxDMAPollPeriod); + + iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); + return 0; +} + +/* The interrupt handler cleans up after the Tx thread, + and schedule a Rx thread work */ +static irqreturn_t intr_handler(int irq, void *dev_instance) +{ + struct net_device *dev = (struct net_device *)dev_instance; + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + int hw_frame_id; + int tx_cnt; + int tx_status; + int handled = 0; + int i; + + + do { + int intr_status = ioread16(ioaddr + IntrStatus); + iowrite16(intr_status, ioaddr + IntrStatus); + + if (netif_msg_intr(np)) + printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", + dev->name, intr_status); + + if (!(intr_status & DEFAULT_INTR)) + break; + + handled = 1; + + if (intr_status & (IntrRxDMADone)) { + iowrite16(DEFAULT_INTR & ~(IntrRxDone|IntrRxDMADone), + ioaddr + IntrEnable); + if (np->budget < 0) + np->budget = RX_BUDGET; + tasklet_schedule(&np->rx_tasklet); + } + if (intr_status & (IntrTxDone | IntrDrvRqst)) { + tx_status = ioread16 (ioaddr + TxStatus); + for (tx_cnt=32; tx_status & 0x80; --tx_cnt) { + if (netif_msg_tx_done(np)) + printk + ("%s: Transmit status is %2.2x.\n", + dev->name, tx_status); + if (tx_status & 0x1e) { + if (netif_msg_tx_err(np)) + printk("%s: Transmit error status %4.4x.\n", + dev->name, tx_status); + dev->stats.tx_errors++; + if (tx_status & 0x10) + dev->stats.tx_fifo_errors++; + if (tx_status & 0x08) + dev->stats.collisions++; + if (tx_status & 0x04) + dev->stats.tx_fifo_errors++; + if (tx_status & 0x02) + dev->stats.tx_window_errors++; + + /* + ** This reset has been verified on + ** DFE-580TX boards ! phdm@macqel.be. + */ + if (tx_status & 0x10) { /* TxUnderrun */ + /* Restart Tx FIFO and transmitter */ + sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16); + /* No need to reset the Tx pointer here */ + } + /* Restart the Tx. Need to make sure tx enabled */ + i = 10; + do { + iowrite16(ioread16(ioaddr + MACCtrl1) | TxEnable, ioaddr + MACCtrl1); + if (ioread16(ioaddr + MACCtrl1) & TxEnabled) + break; + mdelay(1); + } while (--i); + } + /* Yup, this is a documentation bug. It cost me *hours*. */ + iowrite16 (0, ioaddr + TxStatus); + if (tx_cnt < 0) { + iowrite32(5000, ioaddr + DownCounter); + break; + } + tx_status = ioread16 (ioaddr + TxStatus); + } + hw_frame_id = (tx_status >> 8) & 0xff; + } else { + hw_frame_id = ioread8(ioaddr + TxFrameId); + } + + if (np->pci_dev->revision >= 0x14) { + spin_lock(&np->lock); + for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { + int entry = np->dirty_tx % TX_RING_SIZE; + struct sk_buff *skb; + int sw_frame_id; + sw_frame_id = (le32_to_cpu( + np->tx_ring[entry].status) >> 2) & 0xff; + if (sw_frame_id == hw_frame_id && + !(le32_to_cpu(np->tx_ring[entry].status) + & 0x00010000)) + break; + if (sw_frame_id == (hw_frame_id + 1) % + TX_RING_SIZE) + break; + skb = np->tx_skbuff[entry]; + /* Free the original skb. */ + dma_unmap_single(&np->pci_dev->dev, + le32_to_cpu(np->tx_ring[entry].frag[0].addr), + skb->len, DMA_TO_DEVICE); + dev_kfree_skb_irq (np->tx_skbuff[entry]); + np->tx_skbuff[entry] = NULL; + np->tx_ring[entry].frag[0].addr = 0; + np->tx_ring[entry].frag[0].length = 0; + } + spin_unlock(&np->lock); + } else { + spin_lock(&np->lock); + for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { + int entry = np->dirty_tx % TX_RING_SIZE; + struct sk_buff *skb; + if (!(le32_to_cpu(np->tx_ring[entry].status) + & 0x00010000)) + break; + skb = np->tx_skbuff[entry]; + /* Free the original skb. */ + dma_unmap_single(&np->pci_dev->dev, + le32_to_cpu(np->tx_ring[entry].frag[0].addr), + skb->len, DMA_TO_DEVICE); + dev_kfree_skb_irq (np->tx_skbuff[entry]); + np->tx_skbuff[entry] = NULL; + np->tx_ring[entry].frag[0].addr = 0; + np->tx_ring[entry].frag[0].length = 0; + } + spin_unlock(&np->lock); + } + + if (netif_queue_stopped(dev) && + np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { + /* The ring is no longer full, clear busy flag. */ + netif_wake_queue (dev); + } + /* Abnormal error summary/uncommon events handlers. */ + if (intr_status & (IntrPCIErr | LinkChange | StatsMax)) + netdev_error(dev, intr_status); + } while (0); + if (netif_msg_intr(np)) + printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", + dev->name, ioread16(ioaddr + IntrStatus)); + return IRQ_RETVAL(handled); +} + +static void rx_poll(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct netdev_private *np = netdev_priv(dev); + int entry = np->cur_rx % RX_RING_SIZE; + int boguscnt = np->budget; + void __iomem *ioaddr = np->base; + int received = 0; + + /* If EOP is set on the next entry, it's a new packet. Send it up. */ + while (1) { + struct netdev_desc *desc = &(np->rx_ring[entry]); + u32 frame_status = le32_to_cpu(desc->status); + int pkt_len; + + if (--boguscnt < 0) { + goto not_done; + } + if (!(frame_status & DescOwn)) + break; + pkt_len = frame_status & 0x1fff; /* Chip omits the CRC. */ + if (netif_msg_rx_status(np)) + printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", + frame_status); + if (frame_status & 0x001f4000) { + /* There was a error. */ + if (netif_msg_rx_err(np)) + printk(KERN_DEBUG " netdev_rx() Rx error was %8.8x.\n", + frame_status); + dev->stats.rx_errors++; + if (frame_status & 0x00100000) + dev->stats.rx_length_errors++; + if (frame_status & 0x00010000) + dev->stats.rx_fifo_errors++; + if (frame_status & 0x00060000) + dev->stats.rx_frame_errors++; + if (frame_status & 0x00080000) + dev->stats.rx_crc_errors++; + if (frame_status & 0x00100000) { + printk(KERN_WARNING "%s: Oversized Ethernet frame," + " status %8.8x.\n", + dev->name, frame_status); + } + } else { + struct sk_buff *skb; +#ifndef final_version + if (netif_msg_rx_status(np)) + printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d" + ", bogus_cnt %d.\n", + pkt_len, boguscnt); +#endif + /* Check if the packet is long enough to accept without copying + to a minimally-sized skbuff. */ + if (pkt_len < rx_copybreak && + (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { + skb_reserve(skb, 2); /* 16 byte align the IP header */ + dma_sync_single_for_cpu(&np->pci_dev->dev, + le32_to_cpu(desc->frag[0].addr), + np->rx_buf_sz, DMA_FROM_DEVICE); + skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len); + dma_sync_single_for_device(&np->pci_dev->dev, + le32_to_cpu(desc->frag[0].addr), + np->rx_buf_sz, DMA_FROM_DEVICE); + skb_put(skb, pkt_len); + } else { + dma_unmap_single(&np->pci_dev->dev, + le32_to_cpu(desc->frag[0].addr), + np->rx_buf_sz, DMA_FROM_DEVICE); + skb_put(skb = np->rx_skbuff[entry], pkt_len); + np->rx_skbuff[entry] = NULL; + } + skb->protocol = eth_type_trans(skb, dev); + /* Note: checksum -> skb->ip_summed = CHECKSUM_UNNECESSARY; */ + netif_rx(skb); + } + entry = (entry + 1) % RX_RING_SIZE; + received++; + } + np->cur_rx = entry; + refill_rx (dev); + np->budget -= received; + iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); + return; + +not_done: + np->cur_rx = entry; + refill_rx (dev); + if (!received) + received = 1; + np->budget -= received; + if (np->budget <= 0) + np->budget = RX_BUDGET; + tasklet_schedule(&np->rx_tasklet); +} + +static void refill_rx (struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + int entry; + int cnt = 0; + + /* Refill the Rx ring buffers. */ + for (;(np->cur_rx - np->dirty_rx + RX_RING_SIZE) % RX_RING_SIZE > 0; + np->dirty_rx = (np->dirty_rx + 1) % RX_RING_SIZE) { + struct sk_buff *skb; + entry = np->dirty_rx % RX_RING_SIZE; + if (np->rx_skbuff[entry] == NULL) { + skb = dev_alloc_skb(np->rx_buf_sz + 2); + np->rx_skbuff[entry] = skb; + if (skb == NULL) + break; /* Better luck next round. */ + skb->dev = dev; /* Mark as being used by this device. */ + skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ + np->rx_ring[entry].frag[0].addr = cpu_to_le32( + dma_map_single(&np->pci_dev->dev, skb->data, + np->rx_buf_sz, DMA_FROM_DEVICE)); + if (dma_mapping_error(&np->pci_dev->dev, + np->rx_ring[entry].frag[0].addr)) { + dev_kfree_skb_irq(skb); + np->rx_skbuff[entry] = NULL; + break; + } + } + /* Perhaps we need not reset this field. */ + np->rx_ring[entry].frag[0].length = + cpu_to_le32(np->rx_buf_sz | LastFrag); + np->rx_ring[entry].status = 0; + cnt++; + } +} +static void netdev_error(struct net_device *dev, int intr_status) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + u16 mii_ctl, mii_advertise, mii_lpa; + int speed; + + if (intr_status & LinkChange) { + if (mdio_wait_link(dev, 10) == 0) { + printk(KERN_INFO "%s: Link up\n", dev->name); + if (np->an_enable) { + mii_advertise = mdio_read(dev, np->phys[0], + MII_ADVERTISE); + mii_lpa = mdio_read(dev, np->phys[0], MII_LPA); + mii_advertise &= mii_lpa; + printk(KERN_INFO "%s: Link changed: ", + dev->name); + if (mii_advertise & ADVERTISE_100FULL) { + np->speed = 100; + printk("100Mbps, full duplex\n"); + } else if (mii_advertise & ADVERTISE_100HALF) { + np->speed = 100; + printk("100Mbps, half duplex\n"); + } else if (mii_advertise & ADVERTISE_10FULL) { + np->speed = 10; + printk("10Mbps, full duplex\n"); + } else if (mii_advertise & ADVERTISE_10HALF) { + np->speed = 10; + printk("10Mbps, half duplex\n"); + } else + printk("\n"); + + } else { + mii_ctl = mdio_read(dev, np->phys[0], MII_BMCR); + speed = (mii_ctl & BMCR_SPEED100) ? 100 : 10; + np->speed = speed; + printk(KERN_INFO "%s: Link changed: %dMbps ,", + dev->name, speed); + printk("%s duplex.\n", + (mii_ctl & BMCR_FULLDPLX) ? + "full" : "half"); + } + check_duplex(dev); + if (np->flowctrl && np->mii_if.full_duplex) { + iowrite16(ioread16(ioaddr + MulticastFilter1+2) | 0x0200, + ioaddr + MulticastFilter1+2); + iowrite16(ioread16(ioaddr + MACCtrl0) | EnbFlowCtrl, + ioaddr + MACCtrl0); + } + netif_carrier_on(dev); + } else { + printk(KERN_INFO "%s: Link down\n", dev->name); + netif_carrier_off(dev); + } + } + if (intr_status & StatsMax) { + get_stats(dev); + } + if (intr_status & IntrPCIErr) { + printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n", + dev->name, intr_status); + /* We must do a global reset of DMA to continue. */ + } +} + +static struct net_device_stats *get_stats(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + unsigned long flags; + u8 late_coll, single_coll, mult_coll; + + spin_lock_irqsave(&np->statlock, flags); + /* The chip only need report frame silently dropped. */ + dev->stats.rx_missed_errors += ioread8(ioaddr + RxMissed); + dev->stats.tx_packets += ioread16(ioaddr + TxFramesOK); + dev->stats.rx_packets += ioread16(ioaddr + RxFramesOK); + dev->stats.tx_carrier_errors += ioread8(ioaddr + StatsCarrierError); + + mult_coll = ioread8(ioaddr + StatsMultiColl); + np->xstats.tx_multiple_collisions += mult_coll; + single_coll = ioread8(ioaddr + StatsOneColl); + np->xstats.tx_single_collisions += single_coll; + late_coll = ioread8(ioaddr + StatsLateColl); + np->xstats.tx_late_collisions += late_coll; + dev->stats.collisions += mult_coll + + single_coll + + late_coll; + + np->xstats.tx_deferred += ioread8(ioaddr + StatsTxDefer); + np->xstats.tx_deferred_excessive += ioread8(ioaddr + StatsTxXSDefer); + np->xstats.tx_aborted += ioread8(ioaddr + StatsTxAbort); + np->xstats.tx_bcasts += ioread8(ioaddr + StatsBcastTx); + np->xstats.rx_bcasts += ioread8(ioaddr + StatsBcastRx); + np->xstats.tx_mcasts += ioread8(ioaddr + StatsMcastTx); + np->xstats.rx_mcasts += ioread8(ioaddr + StatsMcastRx); + + dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsLow); + dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsHigh) << 16; + dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsLow); + dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsHigh) << 16; + + spin_unlock_irqrestore(&np->statlock, flags); + + return &dev->stats; +} + +static void set_rx_mode(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + u16 mc_filter[4]; /* Multicast hash filter */ + u32 rx_mode; + int i; + + if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ + memset(mc_filter, 0xff, sizeof(mc_filter)); + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAll | AcceptMyPhys; + } else if ((netdev_mc_count(dev) > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to match, or accept all multicasts. */ + memset(mc_filter, 0xff, sizeof(mc_filter)); + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + } else if (!netdev_mc_empty(dev)) { + struct netdev_hw_addr *ha; + int bit; + int index; + int crc; + memset (mc_filter, 0, sizeof (mc_filter)); + netdev_for_each_mc_addr(ha, dev) { + crc = ether_crc_le(ETH_ALEN, ha->addr); + for (index=0, bit=0; bit < 6; bit++, crc <<= 1) + if (crc & 0x80000000) index |= 1 << bit; + mc_filter[index/16] |= (1 << (index % 16)); + } + rx_mode = AcceptBroadcast | AcceptMultiHash | AcceptMyPhys; + } else { + iowrite8(AcceptBroadcast | AcceptMyPhys, ioaddr + RxMode); + return; + } + if (np->mii_if.full_duplex && np->flowctrl) + mc_filter[3] |= 0x0200; + + for (i = 0; i < 4; i++) + iowrite16(mc_filter[i], ioaddr + MulticastFilter0 + i*2); + iowrite8(rx_mode, ioaddr + RxMode); +} + +static int __set_mac_addr(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + u16 addr16; + + addr16 = (dev->dev_addr[0] | (dev->dev_addr[1] << 8)); + iowrite16(addr16, np->base + StationAddr); + addr16 = (dev->dev_addr[2] | (dev->dev_addr[3] << 8)); + iowrite16(addr16, np->base + StationAddr+2); + addr16 = (dev->dev_addr[4] | (dev->dev_addr[5] << 8)); + iowrite16(addr16, np->base + StationAddr+4); + return 0; +} + +/* Invoked with rtnl_lock held */ +static int sundance_set_mac_addr(struct net_device *dev, void *data) +{ + const struct sockaddr *addr = data; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + __set_mac_addr(dev); + + return 0; +} + +static const struct { + const char name[ETH_GSTRING_LEN]; +} sundance_stats[] = { + { "tx_multiple_collisions" }, + { "tx_single_collisions" }, + { "tx_late_collisions" }, + { "tx_deferred" }, + { "tx_deferred_excessive" }, + { "tx_aborted" }, + { "tx_bcasts" }, + { "rx_bcasts" }, + { "tx_mcasts" }, + { "rx_mcasts" }, +}; + +static int check_if_running(struct net_device *dev) +{ + if (!netif_running(dev)) + return -EINVAL; + return 0; +} + +static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct netdev_private *np = netdev_priv(dev); + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->bus_info, pci_name(np->pci_dev)); +} + +static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct netdev_private *np = netdev_priv(dev); + spin_lock_irq(&np->lock); + mii_ethtool_gset(&np->mii_if, ecmd); + spin_unlock_irq(&np->lock); + return 0; +} + +static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct netdev_private *np = netdev_priv(dev); + int res; + spin_lock_irq(&np->lock); + res = mii_ethtool_sset(&np->mii_if, ecmd); + spin_unlock_irq(&np->lock); + return res; +} + +static int nway_reset(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return mii_nway_restart(&np->mii_if); +} + +static u32 get_link(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return mii_link_ok(&np->mii_if); +} + +static u32 get_msglevel(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + return np->msg_enable; +} + +static void set_msglevel(struct net_device *dev, u32 val) +{ + struct netdev_private *np = netdev_priv(dev); + np->msg_enable = val; +} + +static void get_strings(struct net_device *dev, u32 stringset, + u8 *data) +{ + if (stringset == ETH_SS_STATS) + memcpy(data, sundance_stats, sizeof(sundance_stats)); +} + +static int get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(sundance_stats); + default: + return -EOPNOTSUPP; + } +} + +static void get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct netdev_private *np = netdev_priv(dev); + int i = 0; + + get_stats(dev); + data[i++] = np->xstats.tx_multiple_collisions; + data[i++] = np->xstats.tx_single_collisions; + data[i++] = np->xstats.tx_late_collisions; + data[i++] = np->xstats.tx_deferred; + data[i++] = np->xstats.tx_deferred_excessive; + data[i++] = np->xstats.tx_aborted; + data[i++] = np->xstats.tx_bcasts; + data[i++] = np->xstats.rx_bcasts; + data[i++] = np->xstats.tx_mcasts; + data[i++] = np->xstats.rx_mcasts; +} + +static const struct ethtool_ops ethtool_ops = { + .begin = check_if_running, + .get_drvinfo = get_drvinfo, + .get_settings = get_settings, + .set_settings = set_settings, + .nway_reset = nway_reset, + .get_link = get_link, + .get_msglevel = get_msglevel, + .set_msglevel = set_msglevel, + .get_strings = get_strings, + .get_sset_count = get_sset_count, + .get_ethtool_stats = get_ethtool_stats, +}; + +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct netdev_private *np = netdev_priv(dev); + int rc; + + if (!netif_running(dev)) + return -EINVAL; + + spin_lock_irq(&np->lock); + rc = generic_mii_ioctl(&np->mii_if, if_mii(rq), cmd, NULL); + spin_unlock_irq(&np->lock); + + return rc; +} + +static int netdev_close(struct net_device *dev) +{ + struct netdev_private *np = netdev_priv(dev); + void __iomem *ioaddr = np->base; + struct sk_buff *skb; + int i; + + /* Wait and kill tasklet */ + tasklet_kill(&np->rx_tasklet); + tasklet_kill(&np->tx_tasklet); + np->cur_tx = 0; + np->dirty_tx = 0; + np->cur_task = 0; + np->last_tx = NULL; + + netif_stop_queue(dev); + + if (netif_msg_ifdown(np)) { + printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %2.2x " + "Rx %4.4x Int %2.2x.\n", + dev->name, ioread8(ioaddr + TxStatus), + ioread32(ioaddr + RxStatus), ioread16(ioaddr + IntrStatus)); + printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", + dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx); + } + + /* Disable interrupts by clearing the interrupt mask. */ + iowrite16(0x0000, ioaddr + IntrEnable); + + /* Disable Rx and Tx DMA for safely release resource */ + iowrite32(0x500, ioaddr + DMACtrl); + + /* Stop the chip's Tx and Rx processes. */ + iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1); + + for (i = 2000; i > 0; i--) { + if ((ioread32(ioaddr + DMACtrl) & 0xc000) == 0) + break; + mdelay(1); + } + + iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset, + ioaddr + ASIC_HI_WORD(ASICCtrl)); + + for (i = 2000; i > 0; i--) { + if ((ioread16(ioaddr + ASIC_HI_WORD(ASICCtrl)) & ResetBusy) == 0) + break; + mdelay(1); + } + +#ifdef __i386__ + if (netif_msg_hw(np)) { + printk(KERN_DEBUG " Tx ring at %8.8x:\n", + (int)(np->tx_ring_dma)); + for (i = 0; i < TX_RING_SIZE; i++) + printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n", + i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr, + np->tx_ring[i].frag[0].length); + printk(KERN_DEBUG " Rx ring %8.8x:\n", + (int)(np->rx_ring_dma)); + for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) { + printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", + i, np->rx_ring[i].status, np->rx_ring[i].frag[0].addr, + np->rx_ring[i].frag[0].length); + } + } +#endif /* __i386__ debugging only */ + + free_irq(dev->irq, dev); + + del_timer_sync(&np->timer); + + /* Free all the skbuffs in the Rx queue. */ + for (i = 0; i < RX_RING_SIZE; i++) { + np->rx_ring[i].status = 0; + skb = np->rx_skbuff[i]; + if (skb) { + dma_unmap_single(&np->pci_dev->dev, + le32_to_cpu(np->rx_ring[i].frag[0].addr), + np->rx_buf_sz, DMA_FROM_DEVICE); + dev_kfree_skb(skb); + np->rx_skbuff[i] = NULL; + } + np->rx_ring[i].frag[0].addr = cpu_to_le32(0xBADF00D0); /* poison */ + } + for (i = 0; i < TX_RING_SIZE; i++) { + np->tx_ring[i].next_desc = 0; + skb = np->tx_skbuff[i]; + if (skb) { + dma_unmap_single(&np->pci_dev->dev, + le32_to_cpu(np->tx_ring[i].frag[0].addr), + skb->len, DMA_TO_DEVICE); + dev_kfree_skb(skb); + np->tx_skbuff[i] = NULL; + } + } + + return 0; +} + +static void __devexit sundance_remove1 (struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + + if (dev) { + struct netdev_private *np = netdev_priv(dev); + unregister_netdev(dev); + dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, + np->rx_ring, np->rx_ring_dma); + dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, + np->tx_ring, np->tx_ring_dma); + pci_iounmap(pdev, np->base); + pci_release_regions(pdev); + free_netdev(dev); + pci_set_drvdata(pdev, NULL); + } +} + +#ifdef CONFIG_PM + +static int sundance_suspend(struct pci_dev *pci_dev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pci_dev); + + if (!netif_running(dev)) + return 0; + + netdev_close(dev); + netif_device_detach(dev); + + pci_save_state(pci_dev); + pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); + + return 0; +} + +static int sundance_resume(struct pci_dev *pci_dev) +{ + struct net_device *dev = pci_get_drvdata(pci_dev); + int err = 0; + + if (!netif_running(dev)) + return 0; + + pci_set_power_state(pci_dev, PCI_D0); + pci_restore_state(pci_dev); + + err = netdev_open(dev); + if (err) { + printk(KERN_ERR "%s: Can't resume interface!\n", + dev->name); + goto out; + } + + netif_device_attach(dev); + +out: + return err; +} + +#endif /* CONFIG_PM */ + +static struct pci_driver sundance_driver = { + .name = DRV_NAME, + .id_table = sundance_pci_tbl, + .probe = sundance_probe1, + .remove = __devexit_p(sundance_remove1), +#ifdef CONFIG_PM + .suspend = sundance_suspend, + .resume = sundance_resume, +#endif /* CONFIG_PM */ +}; + +static int __init sundance_init(void) +{ +/* when a module, this is printed whether or not devices are found in probe */ +#ifdef MODULE + printk(version); +#endif + return pci_register_driver(&sundance_driver); +} + +static void __exit sundance_exit(void) +{ + pci_unregister_driver(&sundance_driver); +} + +module_init(sundance_init); +module_exit(sundance_exit); + + diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c deleted file mode 100644 index 4793df843c24..000000000000 --- a/drivers/net/sundance.c +++ /dev/null @@ -1,1940 +0,0 @@ -/* sundance.c: A Linux device driver for the Sundance ST201 "Alta". */ -/* - Written 1999-2000 by Donald Becker. - - This software may be used and distributed according to the terms of - the GNU General Public License (GPL), incorporated herein by reference. - Drivers based on or derived from this code fall under the GPL and must - retain the authorship, copyright and license notice. This file is not - a complete program and may only be used when the entire operating - system is licensed under the GPL. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Support and updates available at - http://www.scyld.com/network/sundance.html - [link no longer provides useful info -jgarzik] - Archives of the mailing list are still available at - http://www.beowulf.org/pipermail/netdrivers/ - -*/ - -#define DRV_NAME "sundance" -#define DRV_VERSION "1.2" -#define DRV_RELDATE "11-Sep-2006" - - -/* The user-configurable values. - These may be modified when a driver module is loaded.*/ -static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */ -/* Maximum number of multicast addresses to filter (vs. rx-all-multicast). - Typical is a 64 element hash table based on the Ethernet CRC. */ -static const int multicast_filter_limit = 32; - -/* Set the copy breakpoint for the copy-only-tiny-frames scheme. - Setting to > 1518 effectively disables this feature. - This chip can receive into offset buffers, so the Alpha does not - need a copy-align. */ -static int rx_copybreak; -static int flowctrl=1; - -/* media[] specifies the media type the NIC operates at. - autosense Autosensing active media. - 10mbps_hd 10Mbps half duplex. - 10mbps_fd 10Mbps full duplex. - 100mbps_hd 100Mbps half duplex. - 100mbps_fd 100Mbps full duplex. - 0 Autosensing active media. - 1 10Mbps half duplex. - 2 10Mbps full duplex. - 3 100Mbps half duplex. - 4 100Mbps full duplex. -*/ -#define MAX_UNITS 8 -static char *media[MAX_UNITS]; - - -/* Operational parameters that are set at compile time. */ - -/* Keep the ring sizes a power of two for compile efficiency. - The compiler will convert '%'<2^N> into a bit mask. - Making the Tx ring too large decreases the effectiveness of channel - bonding and packet priority, and more than 128 requires modifying the - Tx error recovery. - Large receive rings merely waste memory. */ -#define TX_RING_SIZE 32 -#define TX_QUEUE_LEN (TX_RING_SIZE - 1) /* Limit ring entries actually used. */ -#define RX_RING_SIZE 64 -#define RX_BUDGET 32 -#define TX_TOTAL_SIZE TX_RING_SIZE*sizeof(struct netdev_desc) -#define RX_TOTAL_SIZE RX_RING_SIZE*sizeof(struct netdev_desc) - -/* Operational parameters that usually are not changed. */ -/* Time in jiffies before concluding the transmitter is hung. */ -#define TX_TIMEOUT (4*HZ) -#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ - -/* Include files, designed to support most kernel versions 2.0.0 and later. */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* Processor type for cache alignment. */ -#include -#include -#include -#include -#include -#include -#include - -/* These identify the driver base version and may not be removed. */ -static const char version[] __devinitconst = - KERN_INFO DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE - " Written by Donald Becker\n"; - -MODULE_AUTHOR("Donald Becker "); -MODULE_DESCRIPTION("Sundance Alta Ethernet driver"); -MODULE_LICENSE("GPL"); - -module_param(debug, int, 0); -module_param(rx_copybreak, int, 0); -module_param_array(media, charp, NULL, 0); -module_param(flowctrl, int, 0); -MODULE_PARM_DESC(debug, "Sundance Alta debug level (0-5)"); -MODULE_PARM_DESC(rx_copybreak, "Sundance Alta copy breakpoint for copy-only-tiny-frames"); -MODULE_PARM_DESC(flowctrl, "Sundance Alta flow control [0|1]"); - -/* - Theory of Operation - -I. Board Compatibility - -This driver is designed for the Sundance Technologies "Alta" ST201 chip. - -II. Board-specific settings - -III. Driver operation - -IIIa. Ring buffers - -This driver uses two statically allocated fixed-size descriptor lists -formed into rings by a branch from the final descriptor to the beginning of -the list. The ring sizes are set at compile time by RX/TX_RING_SIZE. -Some chips explicitly use only 2^N sized rings, while others use a -'next descriptor' pointer that the driver forms into rings. - -IIIb/c. Transmit/Receive Structure - -This driver uses a zero-copy receive and transmit scheme. -The driver allocates full frame size skbuffs for the Rx ring buffers at -open() time and passes the skb->data field to the chip as receive data -buffers. When an incoming frame is less than RX_COPYBREAK bytes long, -a fresh skbuff is allocated and the frame is copied to the new skbuff. -When the incoming frame is larger, the skbuff is passed directly up the -protocol stack. Buffers consumed this way are replaced by newly allocated -skbuffs in a later phase of receives. - -The RX_COPYBREAK value is chosen to trade-off the memory wasted by -using a full-sized skbuff for small frames vs. the copying costs of larger -frames. New boards are typically used in generously configured machines -and the underfilled buffers have negligible impact compared to the benefit of -a single allocation size, so the default value of zero results in never -copying packets. When copying is done, the cost is usually mitigated by using -a combined copy/checksum routine. Copying also preloads the cache, which is -most useful with small frames. - -A subtle aspect of the operation is that the IP header at offset 14 in an -ethernet frame isn't longword aligned for further processing. -Unaligned buffers are permitted by the Sundance hardware, so -frames are received into the skbuff at an offset of "+2", 16-byte aligning -the IP header. - -IIId. Synchronization - -The driver runs as two independent, single-threaded flows of control. One -is the send-packet routine, which enforces single-threaded use by the -dev->tbusy flag. The other thread is the interrupt handler, which is single -threaded by the hardware and interrupt handling software. - -The send packet thread has partial control over the Tx ring and 'dev->tbusy' -flag. It sets the tbusy flag whenever it's queuing a Tx packet. If the next -queue slot is empty, it clears the tbusy flag when finished otherwise it sets -the 'lp->tx_full' flag. - -The interrupt handler has exclusive control over the Rx ring and records stats -from the Tx ring. After reaping the stats, it marks the Tx queue entry as -empty by incrementing the dirty_tx mark. Iff the 'lp->tx_full' flag is set, it -clears both the tx_full and tbusy flags. - -IV. Notes - -IVb. References - -The Sundance ST201 datasheet, preliminary version. -The Kendin KS8723 datasheet, preliminary version. -The ICplus IP100 datasheet, preliminary version. -http://www.scyld.com/expert/100mbps.html -http://www.scyld.com/expert/NWay.html - -IVc. Errata - -*/ - -/* Work-around for Kendin chip bugs. */ -#ifndef CONFIG_SUNDANCE_MMIO -#define USE_IO_OPS 1 -#endif - -static DEFINE_PCI_DEVICE_TABLE(sundance_pci_tbl) = { - { 0x1186, 0x1002, 0x1186, 0x1002, 0, 0, 0 }, - { 0x1186, 0x1002, 0x1186, 0x1003, 0, 0, 1 }, - { 0x1186, 0x1002, 0x1186, 0x1012, 0, 0, 2 }, - { 0x1186, 0x1002, 0x1186, 0x1040, 0, 0, 3 }, - { 0x1186, 0x1002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, - { 0x13F0, 0x0201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, - { 0x13F0, 0x0200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, - { } -}; -MODULE_DEVICE_TABLE(pci, sundance_pci_tbl); - -enum { - netdev_io_size = 128 -}; - -struct pci_id_info { - const char *name; -}; -static const struct pci_id_info pci_id_tbl[] __devinitdata = { - {"D-Link DFE-550TX FAST Ethernet Adapter"}, - {"D-Link DFE-550FX 100Mbps Fiber-optics Adapter"}, - {"D-Link DFE-580TX 4 port Server Adapter"}, - {"D-Link DFE-530TXS FAST Ethernet Adapter"}, - {"D-Link DL10050-based FAST Ethernet Adapter"}, - {"Sundance Technology Alta"}, - {"IC Plus Corporation IP100A FAST Ethernet Adapter"}, - { } /* terminate list. */ -}; - -/* This driver was written to use PCI memory space, however x86-oriented - hardware often uses I/O space accesses. */ - -/* Offsets to the device registers. - Unlike software-only systems, device drivers interact with complex hardware. - It's not useful to define symbolic names for every register bit in the - device. The name can only partially document the semantics and make - the driver longer and more difficult to read. - In general, only the important configuration values or bits changed - multiple times should be defined symbolically. -*/ -enum alta_offsets { - DMACtrl = 0x00, - TxListPtr = 0x04, - TxDMABurstThresh = 0x08, - TxDMAUrgentThresh = 0x09, - TxDMAPollPeriod = 0x0a, - RxDMAStatus = 0x0c, - RxListPtr = 0x10, - DebugCtrl0 = 0x1a, - DebugCtrl1 = 0x1c, - RxDMABurstThresh = 0x14, - RxDMAUrgentThresh = 0x15, - RxDMAPollPeriod = 0x16, - LEDCtrl = 0x1a, - ASICCtrl = 0x30, - EEData = 0x34, - EECtrl = 0x36, - FlashAddr = 0x40, - FlashData = 0x44, - TxStatus = 0x46, - TxFrameId = 0x47, - DownCounter = 0x18, - IntrClear = 0x4a, - IntrEnable = 0x4c, - IntrStatus = 0x4e, - MACCtrl0 = 0x50, - MACCtrl1 = 0x52, - StationAddr = 0x54, - MaxFrameSize = 0x5A, - RxMode = 0x5c, - MIICtrl = 0x5e, - MulticastFilter0 = 0x60, - MulticastFilter1 = 0x64, - RxOctetsLow = 0x68, - RxOctetsHigh = 0x6a, - TxOctetsLow = 0x6c, - TxOctetsHigh = 0x6e, - TxFramesOK = 0x70, - RxFramesOK = 0x72, - StatsCarrierError = 0x74, - StatsLateColl = 0x75, - StatsMultiColl = 0x76, - StatsOneColl = 0x77, - StatsTxDefer = 0x78, - RxMissed = 0x79, - StatsTxXSDefer = 0x7a, - StatsTxAbort = 0x7b, - StatsBcastTx = 0x7c, - StatsBcastRx = 0x7d, - StatsMcastTx = 0x7e, - StatsMcastRx = 0x7f, - /* Aliased and bogus values! */ - RxStatus = 0x0c, -}; - -#define ASIC_HI_WORD(x) ((x) + 2) - -enum ASICCtrl_HiWord_bit { - GlobalReset = 0x0001, - RxReset = 0x0002, - TxReset = 0x0004, - DMAReset = 0x0008, - FIFOReset = 0x0010, - NetworkReset = 0x0020, - HostReset = 0x0040, - ResetBusy = 0x0400, -}; - -/* Bits in the interrupt status/mask registers. */ -enum intr_status_bits { - IntrSummary=0x0001, IntrPCIErr=0x0002, IntrMACCtrl=0x0008, - IntrTxDone=0x0004, IntrRxDone=0x0010, IntrRxStart=0x0020, - IntrDrvRqst=0x0040, - StatsMax=0x0080, LinkChange=0x0100, - IntrTxDMADone=0x0200, IntrRxDMADone=0x0400, -}; - -/* Bits in the RxMode register. */ -enum rx_mode_bits { - AcceptAllIPMulti=0x20, AcceptMultiHash=0x10, AcceptAll=0x08, - AcceptBroadcast=0x04, AcceptMulticast=0x02, AcceptMyPhys=0x01, -}; -/* Bits in MACCtrl. */ -enum mac_ctrl0_bits { - EnbFullDuplex=0x20, EnbRcvLargeFrame=0x40, - EnbFlowCtrl=0x100, EnbPassRxCRC=0x200, -}; -enum mac_ctrl1_bits { - StatsEnable=0x0020, StatsDisable=0x0040, StatsEnabled=0x0080, - TxEnable=0x0100, TxDisable=0x0200, TxEnabled=0x0400, - RxEnable=0x0800, RxDisable=0x1000, RxEnabled=0x2000, -}; - -/* The Rx and Tx buffer descriptors. */ -/* Note that using only 32 bit fields simplifies conversion to big-endian - architectures. */ -struct netdev_desc { - __le32 next_desc; - __le32 status; - struct desc_frag { __le32 addr, length; } frag[1]; -}; - -/* Bits in netdev_desc.status */ -enum desc_status_bits { - DescOwn=0x8000, - DescEndPacket=0x4000, - DescEndRing=0x2000, - LastFrag=0x80000000, - DescIntrOnTx=0x8000, - DescIntrOnDMADone=0x80000000, - DisableAlign = 0x00000001, -}; - -#define PRIV_ALIGN 15 /* Required alignment mask */ -/* Use __attribute__((aligned (L1_CACHE_BYTES))) to maintain alignment - within the structure. */ -#define MII_CNT 4 -struct netdev_private { - /* Descriptor rings first for alignment. */ - struct netdev_desc *rx_ring; - struct netdev_desc *tx_ring; - struct sk_buff* rx_skbuff[RX_RING_SIZE]; - struct sk_buff* tx_skbuff[TX_RING_SIZE]; - dma_addr_t tx_ring_dma; - dma_addr_t rx_ring_dma; - struct timer_list timer; /* Media monitoring timer. */ - /* ethtool extra stats */ - struct { - u64 tx_multiple_collisions; - u64 tx_single_collisions; - u64 tx_late_collisions; - u64 tx_deferred; - u64 tx_deferred_excessive; - u64 tx_aborted; - u64 tx_bcasts; - u64 rx_bcasts; - u64 tx_mcasts; - u64 rx_mcasts; - } xstats; - /* Frequently used values: keep some adjacent for cache effect. */ - spinlock_t lock; - int msg_enable; - int chip_id; - unsigned int cur_rx, dirty_rx; /* Producer/consumer ring indices */ - unsigned int rx_buf_sz; /* Based on MTU+slack. */ - struct netdev_desc *last_tx; /* Last Tx descriptor used. */ - unsigned int cur_tx, dirty_tx; - /* These values are keep track of the transceiver/media in use. */ - unsigned int flowctrl:1; - unsigned int default_port:4; /* Last dev->if_port value. */ - unsigned int an_enable:1; - unsigned int speed; - struct tasklet_struct rx_tasklet; - struct tasklet_struct tx_tasklet; - int budget; - int cur_task; - /* Multicast and receive mode. */ - spinlock_t mcastlock; /* SMP lock multicast updates. */ - u16 mcast_filter[4]; - /* MII transceiver section. */ - struct mii_if_info mii_if; - int mii_preamble_required; - unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */ - struct pci_dev *pci_dev; - void __iomem *base; - spinlock_t statlock; -}; - -/* The station address location in the EEPROM. */ -#define EEPROM_SA_OFFSET 0x10 -#define DEFAULT_INTR (IntrRxDMADone | IntrPCIErr | \ - IntrDrvRqst | IntrTxDone | StatsMax | \ - LinkChange) - -static int change_mtu(struct net_device *dev, int new_mtu); -static int eeprom_read(void __iomem *ioaddr, int location); -static int mdio_read(struct net_device *dev, int phy_id, int location); -static void mdio_write(struct net_device *dev, int phy_id, int location, int value); -static int mdio_wait_link(struct net_device *dev, int wait); -static int netdev_open(struct net_device *dev); -static void check_duplex(struct net_device *dev); -static void netdev_timer(unsigned long data); -static void tx_timeout(struct net_device *dev); -static void init_ring(struct net_device *dev); -static netdev_tx_t start_tx(struct sk_buff *skb, struct net_device *dev); -static int reset_tx (struct net_device *dev); -static irqreturn_t intr_handler(int irq, void *dev_instance); -static void rx_poll(unsigned long data); -static void tx_poll(unsigned long data); -static void refill_rx (struct net_device *dev); -static void netdev_error(struct net_device *dev, int intr_status); -static void netdev_error(struct net_device *dev, int intr_status); -static void set_rx_mode(struct net_device *dev); -static int __set_mac_addr(struct net_device *dev); -static int sundance_set_mac_addr(struct net_device *dev, void *data); -static struct net_device_stats *get_stats(struct net_device *dev); -static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); -static int netdev_close(struct net_device *dev); -static const struct ethtool_ops ethtool_ops; - -static void sundance_reset(struct net_device *dev, unsigned long reset_cmd) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base + ASICCtrl; - int countdown; - - /* ST201 documentation states ASICCtrl is a 32bit register */ - iowrite32 (reset_cmd | ioread32 (ioaddr), ioaddr); - /* ST201 documentation states reset can take up to 1 ms */ - countdown = 10 + 1; - while (ioread32 (ioaddr) & (ResetBusy << 16)) { - if (--countdown == 0) { - printk(KERN_WARNING "%s : reset not completed !!\n", dev->name); - break; - } - udelay(100); - } -} - -static const struct net_device_ops netdev_ops = { - .ndo_open = netdev_open, - .ndo_stop = netdev_close, - .ndo_start_xmit = start_tx, - .ndo_get_stats = get_stats, - .ndo_set_multicast_list = set_rx_mode, - .ndo_do_ioctl = netdev_ioctl, - .ndo_tx_timeout = tx_timeout, - .ndo_change_mtu = change_mtu, - .ndo_set_mac_address = sundance_set_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __devinit sundance_probe1 (struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - struct net_device *dev; - struct netdev_private *np; - static int card_idx; - int chip_idx = ent->driver_data; - int irq; - int i; - void __iomem *ioaddr; - u16 mii_ctl; - void *ring_space; - dma_addr_t ring_dma; -#ifdef USE_IO_OPS - int bar = 0; -#else - int bar = 1; -#endif - int phy, phy_end, phy_idx = 0; - -/* when built into the kernel, we only print version if device is found */ -#ifndef MODULE - static int printed_version; - if (!printed_version++) - printk(version); -#endif - - if (pci_enable_device(pdev)) - return -EIO; - pci_set_master(pdev); - - irq = pdev->irq; - - dev = alloc_etherdev(sizeof(*np)); - if (!dev) - return -ENOMEM; - SET_NETDEV_DEV(dev, &pdev->dev); - - if (pci_request_regions(pdev, DRV_NAME)) - goto err_out_netdev; - - ioaddr = pci_iomap(pdev, bar, netdev_io_size); - if (!ioaddr) - goto err_out_res; - - for (i = 0; i < 3; i++) - ((__le16 *)dev->dev_addr)[i] = - cpu_to_le16(eeprom_read(ioaddr, i + EEPROM_SA_OFFSET)); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - - dev->base_addr = (unsigned long)ioaddr; - dev->irq = irq; - - np = netdev_priv(dev); - np->base = ioaddr; - np->pci_dev = pdev; - np->chip_id = chip_idx; - np->msg_enable = (1 << debug) - 1; - spin_lock_init(&np->lock); - spin_lock_init(&np->statlock); - tasklet_init(&np->rx_tasklet, rx_poll, (unsigned long)dev); - tasklet_init(&np->tx_tasklet, tx_poll, (unsigned long)dev); - - ring_space = dma_alloc_coherent(&pdev->dev, TX_TOTAL_SIZE, - &ring_dma, GFP_KERNEL); - if (!ring_space) - goto err_out_cleardev; - np->tx_ring = (struct netdev_desc *)ring_space; - np->tx_ring_dma = ring_dma; - - ring_space = dma_alloc_coherent(&pdev->dev, RX_TOTAL_SIZE, - &ring_dma, GFP_KERNEL); - if (!ring_space) - goto err_out_unmap_tx; - np->rx_ring = (struct netdev_desc *)ring_space; - np->rx_ring_dma = ring_dma; - - np->mii_if.dev = dev; - np->mii_if.mdio_read = mdio_read; - np->mii_if.mdio_write = mdio_write; - np->mii_if.phy_id_mask = 0x1f; - np->mii_if.reg_num_mask = 0x1f; - - /* The chip-specific entries in the device structure. */ - dev->netdev_ops = &netdev_ops; - SET_ETHTOOL_OPS(dev, ðtool_ops); - dev->watchdog_timeo = TX_TIMEOUT; - - pci_set_drvdata(pdev, dev); - - i = register_netdev(dev); - if (i) - goto err_out_unmap_rx; - - printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n", - dev->name, pci_id_tbl[chip_idx].name, ioaddr, - dev->dev_addr, irq); - - np->phys[0] = 1; /* Default setting */ - np->mii_preamble_required++; - - /* - * It seems some phys doesn't deal well with address 0 being accessed - * first - */ - if (sundance_pci_tbl[np->chip_id].device == 0x0200) { - phy = 0; - phy_end = 31; - } else { - phy = 1; - phy_end = 32; /* wraps to zero, due to 'phy & 0x1f' */ - } - for (; phy <= phy_end && phy_idx < MII_CNT; phy++) { - int phyx = phy & 0x1f; - int mii_status = mdio_read(dev, phyx, MII_BMSR); - if (mii_status != 0xffff && mii_status != 0x0000) { - np->phys[phy_idx++] = phyx; - np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE); - if ((mii_status & 0x0040) == 0) - np->mii_preamble_required++; - printk(KERN_INFO "%s: MII PHY found at address %d, status " - "0x%4.4x advertising %4.4x.\n", - dev->name, phyx, mii_status, np->mii_if.advertising); - } - } - np->mii_preamble_required--; - - if (phy_idx == 0) { - printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n", - dev->name, ioread32(ioaddr + ASICCtrl)); - goto err_out_unregister; - } - - np->mii_if.phy_id = np->phys[0]; - - /* Parse override configuration */ - np->an_enable = 1; - if (card_idx < MAX_UNITS) { - if (media[card_idx] != NULL) { - np->an_enable = 0; - if (strcmp (media[card_idx], "100mbps_fd") == 0 || - strcmp (media[card_idx], "4") == 0) { - np->speed = 100; - np->mii_if.full_duplex = 1; - } else if (strcmp (media[card_idx], "100mbps_hd") == 0 || - strcmp (media[card_idx], "3") == 0) { - np->speed = 100; - np->mii_if.full_duplex = 0; - } else if (strcmp (media[card_idx], "10mbps_fd") == 0 || - strcmp (media[card_idx], "2") == 0) { - np->speed = 10; - np->mii_if.full_duplex = 1; - } else if (strcmp (media[card_idx], "10mbps_hd") == 0 || - strcmp (media[card_idx], "1") == 0) { - np->speed = 10; - np->mii_if.full_duplex = 0; - } else { - np->an_enable = 1; - } - } - if (flowctrl == 1) - np->flowctrl = 1; - } - - /* Fibre PHY? */ - if (ioread32 (ioaddr + ASICCtrl) & 0x80) { - /* Default 100Mbps Full */ - if (np->an_enable) { - np->speed = 100; - np->mii_if.full_duplex = 1; - np->an_enable = 0; - } - } - /* Reset PHY */ - mdio_write (dev, np->phys[0], MII_BMCR, BMCR_RESET); - mdelay (300); - /* If flow control enabled, we need to advertise it.*/ - if (np->flowctrl) - mdio_write (dev, np->phys[0], MII_ADVERTISE, np->mii_if.advertising | 0x0400); - mdio_write (dev, np->phys[0], MII_BMCR, BMCR_ANENABLE|BMCR_ANRESTART); - /* Force media type */ - if (!np->an_enable) { - mii_ctl = 0; - mii_ctl |= (np->speed == 100) ? BMCR_SPEED100 : 0; - mii_ctl |= (np->mii_if.full_duplex) ? BMCR_FULLDPLX : 0; - mdio_write (dev, np->phys[0], MII_BMCR, mii_ctl); - printk (KERN_INFO "Override speed=%d, %s duplex\n", - np->speed, np->mii_if.full_duplex ? "Full" : "Half"); - - } - - /* Perhaps move the reset here? */ - /* Reset the chip to erase previous misconfiguration. */ - if (netif_msg_hw(np)) - printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl)); - sundance_reset(dev, 0x00ff << 16); - if (netif_msg_hw(np)) - printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl)); - - card_idx++; - return 0; - -err_out_unregister: - unregister_netdev(dev); -err_out_unmap_rx: - dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, - np->rx_ring, np->rx_ring_dma); -err_out_unmap_tx: - dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, - np->tx_ring, np->tx_ring_dma); -err_out_cleardev: - pci_set_drvdata(pdev, NULL); - pci_iounmap(pdev, ioaddr); -err_out_res: - pci_release_regions(pdev); -err_out_netdev: - free_netdev (dev); - return -ENODEV; -} - -static int change_mtu(struct net_device *dev, int new_mtu) -{ - if ((new_mtu < 68) || (new_mtu > 8191)) /* Set by RxDMAFrameLen */ - return -EINVAL; - if (netif_running(dev)) - return -EBUSY; - dev->mtu = new_mtu; - return 0; -} - -#define eeprom_delay(ee_addr) ioread32(ee_addr) -/* Read the EEPROM and MII Management Data I/O (MDIO) interfaces. */ -static int __devinit eeprom_read(void __iomem *ioaddr, int location) -{ - int boguscnt = 10000; /* Typical 1900 ticks. */ - iowrite16(0x0200 | (location & 0xff), ioaddr + EECtrl); - do { - eeprom_delay(ioaddr + EECtrl); - if (! (ioread16(ioaddr + EECtrl) & 0x8000)) { - return ioread16(ioaddr + EEData); - } - } while (--boguscnt > 0); - return 0; -} - -/* MII transceiver control section. - Read and write the MII registers using software-generated serial - MDIO protocol. See the MII specifications or DP83840A data sheet - for details. - - The maximum data clock rate is 2.5 Mhz. The minimum timing is usually - met by back-to-back 33Mhz PCI cycles. */ -#define mdio_delay() ioread8(mdio_addr) - -enum mii_reg_bits { - MDIO_ShiftClk=0x0001, MDIO_Data=0x0002, MDIO_EnbOutput=0x0004, -}; -#define MDIO_EnbIn (0) -#define MDIO_WRITE0 (MDIO_EnbOutput) -#define MDIO_WRITE1 (MDIO_Data | MDIO_EnbOutput) - -/* Generate the preamble required for initial synchronization and - a few older transceivers. */ -static void mdio_sync(void __iomem *mdio_addr) -{ - int bits = 32; - - /* Establish sync by sending at least 32 logic ones. */ - while (--bits >= 0) { - iowrite8(MDIO_WRITE1, mdio_addr); - mdio_delay(); - iowrite8(MDIO_WRITE1 | MDIO_ShiftClk, mdio_addr); - mdio_delay(); - } -} - -static int mdio_read(struct net_device *dev, int phy_id, int location) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *mdio_addr = np->base + MIICtrl; - int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; - int i, retval = 0; - - if (np->mii_preamble_required) - mdio_sync(mdio_addr); - - /* Shift the read command bits out. */ - for (i = 15; i >= 0; i--) { - int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; - - iowrite8(dataval, mdio_addr); - mdio_delay(); - iowrite8(dataval | MDIO_ShiftClk, mdio_addr); - mdio_delay(); - } - /* Read the two transition, 16 data, and wire-idle bits. */ - for (i = 19; i > 0; i--) { - iowrite8(MDIO_EnbIn, mdio_addr); - mdio_delay(); - retval = (retval << 1) | ((ioread8(mdio_addr) & MDIO_Data) ? 1 : 0); - iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); - mdio_delay(); - } - return (retval>>1) & 0xffff; -} - -static void mdio_write(struct net_device *dev, int phy_id, int location, int value) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *mdio_addr = np->base + MIICtrl; - int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value; - int i; - - if (np->mii_preamble_required) - mdio_sync(mdio_addr); - - /* Shift the command bits out. */ - for (i = 31; i >= 0; i--) { - int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; - - iowrite8(dataval, mdio_addr); - mdio_delay(); - iowrite8(dataval | MDIO_ShiftClk, mdio_addr); - mdio_delay(); - } - /* Clear out extra bits. */ - for (i = 2; i > 0; i--) { - iowrite8(MDIO_EnbIn, mdio_addr); - mdio_delay(); - iowrite8(MDIO_EnbIn | MDIO_ShiftClk, mdio_addr); - mdio_delay(); - } -} - -static int mdio_wait_link(struct net_device *dev, int wait) -{ - int bmsr; - int phy_id; - struct netdev_private *np; - - np = netdev_priv(dev); - phy_id = np->phys[0]; - - do { - bmsr = mdio_read(dev, phy_id, MII_BMSR); - if (bmsr & 0x0004) - return 0; - mdelay(1); - } while (--wait > 0); - return -1; -} - -static int netdev_open(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base; - unsigned long flags; - int i; - - /* Do we need to reset the chip??? */ - - i = request_irq(dev->irq, intr_handler, IRQF_SHARED, dev->name, dev); - if (i) - return i; - - if (netif_msg_ifup(np)) - printk(KERN_DEBUG "%s: netdev_open() irq %d.\n", - dev->name, dev->irq); - init_ring(dev); - - iowrite32(np->rx_ring_dma, ioaddr + RxListPtr); - /* The Tx list pointer is written as packets are queued. */ - - /* Initialize other registers. */ - __set_mac_addr(dev); -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) - iowrite16(dev->mtu + 18, ioaddr + MaxFrameSize); -#else - iowrite16(dev->mtu + 14, ioaddr + MaxFrameSize); -#endif - if (dev->mtu > 2047) - iowrite32(ioread32(ioaddr + ASICCtrl) | 0x0C, ioaddr + ASICCtrl); - - /* Configure the PCI bus bursts and FIFO thresholds. */ - - if (dev->if_port == 0) - dev->if_port = np->default_port; - - spin_lock_init(&np->mcastlock); - - set_rx_mode(dev); - iowrite16(0, ioaddr + IntrEnable); - iowrite16(0, ioaddr + DownCounter); - /* Set the chip to poll every N*320nsec. */ - iowrite8(100, ioaddr + RxDMAPollPeriod); - iowrite8(127, ioaddr + TxDMAPollPeriod); - /* Fix DFE-580TX packet drop issue */ - if (np->pci_dev->revision >= 0x14) - iowrite8(0x01, ioaddr + DebugCtrl1); - netif_start_queue(dev); - - spin_lock_irqsave(&np->lock, flags); - reset_tx(dev); - spin_unlock_irqrestore(&np->lock, flags); - - iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); - - if (netif_msg_ifup(np)) - printk(KERN_DEBUG "%s: Done netdev_open(), status: Rx %x Tx %x " - "MAC Control %x, %4.4x %4.4x.\n", - dev->name, ioread32(ioaddr + RxStatus), ioread8(ioaddr + TxStatus), - ioread32(ioaddr + MACCtrl0), - ioread16(ioaddr + MACCtrl1), ioread16(ioaddr + MACCtrl0)); - - /* Set the timer to check for link beat. */ - init_timer(&np->timer); - np->timer.expires = jiffies + 3*HZ; - np->timer.data = (unsigned long)dev; - np->timer.function = netdev_timer; /* timer handler */ - add_timer(&np->timer); - - /* Enable interrupts by setting the interrupt mask. */ - iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); - - return 0; -} - -static void check_duplex(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base; - int mii_lpa = mdio_read(dev, np->phys[0], MII_LPA); - int negotiated = mii_lpa & np->mii_if.advertising; - int duplex; - - /* Force media */ - if (!np->an_enable || mii_lpa == 0xffff) { - if (np->mii_if.full_duplex) - iowrite16 (ioread16 (ioaddr + MACCtrl0) | EnbFullDuplex, - ioaddr + MACCtrl0); - return; - } - - /* Autonegotiation */ - duplex = (negotiated & 0x0100) || (negotiated & 0x01C0) == 0x0040; - if (np->mii_if.full_duplex != duplex) { - np->mii_if.full_duplex = duplex; - if (netif_msg_link(np)) - printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d " - "negotiated capability %4.4x.\n", dev->name, - duplex ? "full" : "half", np->phys[0], negotiated); - iowrite16(ioread16(ioaddr + MACCtrl0) | (duplex ? 0x20 : 0), ioaddr + MACCtrl0); - } -} - -static void netdev_timer(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base; - int next_tick = 10*HZ; - - if (netif_msg_timer(np)) { - printk(KERN_DEBUG "%s: Media selection timer tick, intr status %4.4x, " - "Tx %x Rx %x.\n", - dev->name, ioread16(ioaddr + IntrEnable), - ioread8(ioaddr + TxStatus), ioread32(ioaddr + RxStatus)); - } - check_duplex(dev); - np->timer.expires = jiffies + next_tick; - add_timer(&np->timer); -} - -static void tx_timeout(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base; - unsigned long flag; - - netif_stop_queue(dev); - tasklet_disable(&np->tx_tasklet); - iowrite16(0, ioaddr + IntrEnable); - printk(KERN_WARNING "%s: Transmit timed out, TxStatus %2.2x " - "TxFrameId %2.2x," - " resetting...\n", dev->name, ioread8(ioaddr + TxStatus), - ioread8(ioaddr + TxFrameId)); - - { - int i; - for (i=0; itx_ring_dma + i*sizeof(*np->tx_ring)), - le32_to_cpu(np->tx_ring[i].next_desc), - le32_to_cpu(np->tx_ring[i].status), - (le32_to_cpu(np->tx_ring[i].status) >> 2) & 0xff, - le32_to_cpu(np->tx_ring[i].frag[0].addr), - le32_to_cpu(np->tx_ring[i].frag[0].length)); - } - printk(KERN_DEBUG "TxListPtr=%08x netif_queue_stopped=%d\n", - ioread32(np->base + TxListPtr), - netif_queue_stopped(dev)); - printk(KERN_DEBUG "cur_tx=%d(%02x) dirty_tx=%d(%02x)\n", - np->cur_tx, np->cur_tx % TX_RING_SIZE, - np->dirty_tx, np->dirty_tx % TX_RING_SIZE); - printk(KERN_DEBUG "cur_rx=%d dirty_rx=%d\n", np->cur_rx, np->dirty_rx); - printk(KERN_DEBUG "cur_task=%d\n", np->cur_task); - } - spin_lock_irqsave(&np->lock, flag); - - /* Stop and restart the chip's Tx processes . */ - reset_tx(dev); - spin_unlock_irqrestore(&np->lock, flag); - - dev->if_port = 0; - - dev->trans_start = jiffies; /* prevent tx timeout */ - dev->stats.tx_errors++; - if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { - netif_wake_queue(dev); - } - iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); - tasklet_enable(&np->tx_tasklet); -} - - -/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void init_ring(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int i; - - np->cur_rx = np->cur_tx = 0; - np->dirty_rx = np->dirty_tx = 0; - np->cur_task = 0; - - np->rx_buf_sz = (dev->mtu <= 1520 ? PKT_BUF_SZ : dev->mtu + 16); - - /* Initialize all Rx descriptors. */ - for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].next_desc = cpu_to_le32(np->rx_ring_dma + - ((i+1)%RX_RING_SIZE)*sizeof(*np->rx_ring)); - np->rx_ring[i].status = 0; - np->rx_ring[i].frag[0].length = 0; - np->rx_skbuff[i] = NULL; - } - - /* Fill in the Rx buffers. Handle allocation failure gracefully. */ - for (i = 0; i < RX_RING_SIZE; i++) { - struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz + 2); - np->rx_skbuff[i] = skb; - if (skb == NULL) - break; - skb->dev = dev; /* Mark as being used by this device. */ - skb_reserve(skb, 2); /* 16 byte align the IP header. */ - np->rx_ring[i].frag[0].addr = cpu_to_le32( - dma_map_single(&np->pci_dev->dev, skb->data, - np->rx_buf_sz, DMA_FROM_DEVICE)); - if (dma_mapping_error(&np->pci_dev->dev, - np->rx_ring[i].frag[0].addr)) { - dev_kfree_skb(skb); - np->rx_skbuff[i] = NULL; - break; - } - np->rx_ring[i].frag[0].length = cpu_to_le32(np->rx_buf_sz | LastFrag); - } - np->dirty_rx = (unsigned int)(i - RX_RING_SIZE); - - for (i = 0; i < TX_RING_SIZE; i++) { - np->tx_skbuff[i] = NULL; - np->tx_ring[i].status = 0; - } -} - -static void tx_poll (unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct netdev_private *np = netdev_priv(dev); - unsigned head = np->cur_task % TX_RING_SIZE; - struct netdev_desc *txdesc = - &np->tx_ring[(np->cur_tx - 1) % TX_RING_SIZE]; - - /* Chain the next pointer */ - for (; np->cur_tx - np->cur_task > 0; np->cur_task++) { - int entry = np->cur_task % TX_RING_SIZE; - txdesc = &np->tx_ring[entry]; - if (np->last_tx) { - np->last_tx->next_desc = cpu_to_le32(np->tx_ring_dma + - entry*sizeof(struct netdev_desc)); - } - np->last_tx = txdesc; - } - /* Indicate the latest descriptor of tx ring */ - txdesc->status |= cpu_to_le32(DescIntrOnTx); - - if (ioread32 (np->base + TxListPtr) == 0) - iowrite32 (np->tx_ring_dma + head * sizeof(struct netdev_desc), - np->base + TxListPtr); -} - -static netdev_tx_t -start_tx (struct sk_buff *skb, struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - struct netdev_desc *txdesc; - unsigned entry; - - /* Calculate the next Tx descriptor entry. */ - entry = np->cur_tx % TX_RING_SIZE; - np->tx_skbuff[entry] = skb; - txdesc = &np->tx_ring[entry]; - - txdesc->next_desc = 0; - txdesc->status = cpu_to_le32 ((entry << 2) | DisableAlign); - txdesc->frag[0].addr = cpu_to_le32(dma_map_single(&np->pci_dev->dev, - skb->data, skb->len, DMA_TO_DEVICE)); - if (dma_mapping_error(&np->pci_dev->dev, - txdesc->frag[0].addr)) - goto drop_frame; - txdesc->frag[0].length = cpu_to_le32 (skb->len | LastFrag); - - /* Increment cur_tx before tasklet_schedule() */ - np->cur_tx++; - mb(); - /* Schedule a tx_poll() task */ - tasklet_schedule(&np->tx_tasklet); - - /* On some architectures: explicitly flush cache lines here. */ - if (np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 1 && - !netif_queue_stopped(dev)) { - /* do nothing */ - } else { - netif_stop_queue (dev); - } - if (netif_msg_tx_queued(np)) { - printk (KERN_DEBUG - "%s: Transmit frame #%d queued in slot %d.\n", - dev->name, np->cur_tx, entry); - } - return NETDEV_TX_OK; - -drop_frame: - dev_kfree_skb(skb); - np->tx_skbuff[entry] = NULL; - dev->stats.tx_dropped++; - return NETDEV_TX_OK; -} - -/* Reset hardware tx and free all of tx buffers */ -static int -reset_tx (struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base; - struct sk_buff *skb; - int i; - - /* Reset tx logic, TxListPtr will be cleaned */ - iowrite16 (TxDisable, ioaddr + MACCtrl1); - sundance_reset(dev, (NetworkReset|FIFOReset|DMAReset|TxReset) << 16); - - /* free all tx skbuff */ - for (i = 0; i < TX_RING_SIZE; i++) { - np->tx_ring[i].next_desc = 0; - - skb = np->tx_skbuff[i]; - if (skb) { - dma_unmap_single(&np->pci_dev->dev, - le32_to_cpu(np->tx_ring[i].frag[0].addr), - skb->len, DMA_TO_DEVICE); - dev_kfree_skb_any(skb); - np->tx_skbuff[i] = NULL; - dev->stats.tx_dropped++; - } - } - np->cur_tx = np->dirty_tx = 0; - np->cur_task = 0; - - np->last_tx = NULL; - iowrite8(127, ioaddr + TxDMAPollPeriod); - - iowrite16 (StatsEnable | RxEnable | TxEnable, ioaddr + MACCtrl1); - return 0; -} - -/* The interrupt handler cleans up after the Tx thread, - and schedule a Rx thread work */ -static irqreturn_t intr_handler(int irq, void *dev_instance) -{ - struct net_device *dev = (struct net_device *)dev_instance; - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base; - int hw_frame_id; - int tx_cnt; - int tx_status; - int handled = 0; - int i; - - - do { - int intr_status = ioread16(ioaddr + IntrStatus); - iowrite16(intr_status, ioaddr + IntrStatus); - - if (netif_msg_intr(np)) - printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", - dev->name, intr_status); - - if (!(intr_status & DEFAULT_INTR)) - break; - - handled = 1; - - if (intr_status & (IntrRxDMADone)) { - iowrite16(DEFAULT_INTR & ~(IntrRxDone|IntrRxDMADone), - ioaddr + IntrEnable); - if (np->budget < 0) - np->budget = RX_BUDGET; - tasklet_schedule(&np->rx_tasklet); - } - if (intr_status & (IntrTxDone | IntrDrvRqst)) { - tx_status = ioread16 (ioaddr + TxStatus); - for (tx_cnt=32; tx_status & 0x80; --tx_cnt) { - if (netif_msg_tx_done(np)) - printk - ("%s: Transmit status is %2.2x.\n", - dev->name, tx_status); - if (tx_status & 0x1e) { - if (netif_msg_tx_err(np)) - printk("%s: Transmit error status %4.4x.\n", - dev->name, tx_status); - dev->stats.tx_errors++; - if (tx_status & 0x10) - dev->stats.tx_fifo_errors++; - if (tx_status & 0x08) - dev->stats.collisions++; - if (tx_status & 0x04) - dev->stats.tx_fifo_errors++; - if (tx_status & 0x02) - dev->stats.tx_window_errors++; - - /* - ** This reset has been verified on - ** DFE-580TX boards ! phdm@macqel.be. - */ - if (tx_status & 0x10) { /* TxUnderrun */ - /* Restart Tx FIFO and transmitter */ - sundance_reset(dev, (NetworkReset|FIFOReset|TxReset) << 16); - /* No need to reset the Tx pointer here */ - } - /* Restart the Tx. Need to make sure tx enabled */ - i = 10; - do { - iowrite16(ioread16(ioaddr + MACCtrl1) | TxEnable, ioaddr + MACCtrl1); - if (ioread16(ioaddr + MACCtrl1) & TxEnabled) - break; - mdelay(1); - } while (--i); - } - /* Yup, this is a documentation bug. It cost me *hours*. */ - iowrite16 (0, ioaddr + TxStatus); - if (tx_cnt < 0) { - iowrite32(5000, ioaddr + DownCounter); - break; - } - tx_status = ioread16 (ioaddr + TxStatus); - } - hw_frame_id = (tx_status >> 8) & 0xff; - } else { - hw_frame_id = ioread8(ioaddr + TxFrameId); - } - - if (np->pci_dev->revision >= 0x14) { - spin_lock(&np->lock); - for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { - int entry = np->dirty_tx % TX_RING_SIZE; - struct sk_buff *skb; - int sw_frame_id; - sw_frame_id = (le32_to_cpu( - np->tx_ring[entry].status) >> 2) & 0xff; - if (sw_frame_id == hw_frame_id && - !(le32_to_cpu(np->tx_ring[entry].status) - & 0x00010000)) - break; - if (sw_frame_id == (hw_frame_id + 1) % - TX_RING_SIZE) - break; - skb = np->tx_skbuff[entry]; - /* Free the original skb. */ - dma_unmap_single(&np->pci_dev->dev, - le32_to_cpu(np->tx_ring[entry].frag[0].addr), - skb->len, DMA_TO_DEVICE); - dev_kfree_skb_irq (np->tx_skbuff[entry]); - np->tx_skbuff[entry] = NULL; - np->tx_ring[entry].frag[0].addr = 0; - np->tx_ring[entry].frag[0].length = 0; - } - spin_unlock(&np->lock); - } else { - spin_lock(&np->lock); - for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) { - int entry = np->dirty_tx % TX_RING_SIZE; - struct sk_buff *skb; - if (!(le32_to_cpu(np->tx_ring[entry].status) - & 0x00010000)) - break; - skb = np->tx_skbuff[entry]; - /* Free the original skb. */ - dma_unmap_single(&np->pci_dev->dev, - le32_to_cpu(np->tx_ring[entry].frag[0].addr), - skb->len, DMA_TO_DEVICE); - dev_kfree_skb_irq (np->tx_skbuff[entry]); - np->tx_skbuff[entry] = NULL; - np->tx_ring[entry].frag[0].addr = 0; - np->tx_ring[entry].frag[0].length = 0; - } - spin_unlock(&np->lock); - } - - if (netif_queue_stopped(dev) && - np->cur_tx - np->dirty_tx < TX_QUEUE_LEN - 4) { - /* The ring is no longer full, clear busy flag. */ - netif_wake_queue (dev); - } - /* Abnormal error summary/uncommon events handlers. */ - if (intr_status & (IntrPCIErr | LinkChange | StatsMax)) - netdev_error(dev, intr_status); - } while (0); - if (netif_msg_intr(np)) - printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n", - dev->name, ioread16(ioaddr + IntrStatus)); - return IRQ_RETVAL(handled); -} - -static void rx_poll(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - struct netdev_private *np = netdev_priv(dev); - int entry = np->cur_rx % RX_RING_SIZE; - int boguscnt = np->budget; - void __iomem *ioaddr = np->base; - int received = 0; - - /* If EOP is set on the next entry, it's a new packet. Send it up. */ - while (1) { - struct netdev_desc *desc = &(np->rx_ring[entry]); - u32 frame_status = le32_to_cpu(desc->status); - int pkt_len; - - if (--boguscnt < 0) { - goto not_done; - } - if (!(frame_status & DescOwn)) - break; - pkt_len = frame_status & 0x1fff; /* Chip omits the CRC. */ - if (netif_msg_rx_status(np)) - printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", - frame_status); - if (frame_status & 0x001f4000) { - /* There was a error. */ - if (netif_msg_rx_err(np)) - printk(KERN_DEBUG " netdev_rx() Rx error was %8.8x.\n", - frame_status); - dev->stats.rx_errors++; - if (frame_status & 0x00100000) - dev->stats.rx_length_errors++; - if (frame_status & 0x00010000) - dev->stats.rx_fifo_errors++; - if (frame_status & 0x00060000) - dev->stats.rx_frame_errors++; - if (frame_status & 0x00080000) - dev->stats.rx_crc_errors++; - if (frame_status & 0x00100000) { - printk(KERN_WARNING "%s: Oversized Ethernet frame," - " status %8.8x.\n", - dev->name, frame_status); - } - } else { - struct sk_buff *skb; -#ifndef final_version - if (netif_msg_rx_status(np)) - printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d" - ", bogus_cnt %d.\n", - pkt_len, boguscnt); -#endif - /* Check if the packet is long enough to accept without copying - to a minimally-sized skbuff. */ - if (pkt_len < rx_copybreak && - (skb = dev_alloc_skb(pkt_len + 2)) != NULL) { - skb_reserve(skb, 2); /* 16 byte align the IP header */ - dma_sync_single_for_cpu(&np->pci_dev->dev, - le32_to_cpu(desc->frag[0].addr), - np->rx_buf_sz, DMA_FROM_DEVICE); - skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len); - dma_sync_single_for_device(&np->pci_dev->dev, - le32_to_cpu(desc->frag[0].addr), - np->rx_buf_sz, DMA_FROM_DEVICE); - skb_put(skb, pkt_len); - } else { - dma_unmap_single(&np->pci_dev->dev, - le32_to_cpu(desc->frag[0].addr), - np->rx_buf_sz, DMA_FROM_DEVICE); - skb_put(skb = np->rx_skbuff[entry], pkt_len); - np->rx_skbuff[entry] = NULL; - } - skb->protocol = eth_type_trans(skb, dev); - /* Note: checksum -> skb->ip_summed = CHECKSUM_UNNECESSARY; */ - netif_rx(skb); - } - entry = (entry + 1) % RX_RING_SIZE; - received++; - } - np->cur_rx = entry; - refill_rx (dev); - np->budget -= received; - iowrite16(DEFAULT_INTR, ioaddr + IntrEnable); - return; - -not_done: - np->cur_rx = entry; - refill_rx (dev); - if (!received) - received = 1; - np->budget -= received; - if (np->budget <= 0) - np->budget = RX_BUDGET; - tasklet_schedule(&np->rx_tasklet); -} - -static void refill_rx (struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - int entry; - int cnt = 0; - - /* Refill the Rx ring buffers. */ - for (;(np->cur_rx - np->dirty_rx + RX_RING_SIZE) % RX_RING_SIZE > 0; - np->dirty_rx = (np->dirty_rx + 1) % RX_RING_SIZE) { - struct sk_buff *skb; - entry = np->dirty_rx % RX_RING_SIZE; - if (np->rx_skbuff[entry] == NULL) { - skb = dev_alloc_skb(np->rx_buf_sz + 2); - np->rx_skbuff[entry] = skb; - if (skb == NULL) - break; /* Better luck next round. */ - skb->dev = dev; /* Mark as being used by this device. */ - skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */ - np->rx_ring[entry].frag[0].addr = cpu_to_le32( - dma_map_single(&np->pci_dev->dev, skb->data, - np->rx_buf_sz, DMA_FROM_DEVICE)); - if (dma_mapping_error(&np->pci_dev->dev, - np->rx_ring[entry].frag[0].addr)) { - dev_kfree_skb_irq(skb); - np->rx_skbuff[entry] = NULL; - break; - } - } - /* Perhaps we need not reset this field. */ - np->rx_ring[entry].frag[0].length = - cpu_to_le32(np->rx_buf_sz | LastFrag); - np->rx_ring[entry].status = 0; - cnt++; - } -} -static void netdev_error(struct net_device *dev, int intr_status) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base; - u16 mii_ctl, mii_advertise, mii_lpa; - int speed; - - if (intr_status & LinkChange) { - if (mdio_wait_link(dev, 10) == 0) { - printk(KERN_INFO "%s: Link up\n", dev->name); - if (np->an_enable) { - mii_advertise = mdio_read(dev, np->phys[0], - MII_ADVERTISE); - mii_lpa = mdio_read(dev, np->phys[0], MII_LPA); - mii_advertise &= mii_lpa; - printk(KERN_INFO "%s: Link changed: ", - dev->name); - if (mii_advertise & ADVERTISE_100FULL) { - np->speed = 100; - printk("100Mbps, full duplex\n"); - } else if (mii_advertise & ADVERTISE_100HALF) { - np->speed = 100; - printk("100Mbps, half duplex\n"); - } else if (mii_advertise & ADVERTISE_10FULL) { - np->speed = 10; - printk("10Mbps, full duplex\n"); - } else if (mii_advertise & ADVERTISE_10HALF) { - np->speed = 10; - printk("10Mbps, half duplex\n"); - } else - printk("\n"); - - } else { - mii_ctl = mdio_read(dev, np->phys[0], MII_BMCR); - speed = (mii_ctl & BMCR_SPEED100) ? 100 : 10; - np->speed = speed; - printk(KERN_INFO "%s: Link changed: %dMbps ,", - dev->name, speed); - printk("%s duplex.\n", - (mii_ctl & BMCR_FULLDPLX) ? - "full" : "half"); - } - check_duplex(dev); - if (np->flowctrl && np->mii_if.full_duplex) { - iowrite16(ioread16(ioaddr + MulticastFilter1+2) | 0x0200, - ioaddr + MulticastFilter1+2); - iowrite16(ioread16(ioaddr + MACCtrl0) | EnbFlowCtrl, - ioaddr + MACCtrl0); - } - netif_carrier_on(dev); - } else { - printk(KERN_INFO "%s: Link down\n", dev->name); - netif_carrier_off(dev); - } - } - if (intr_status & StatsMax) { - get_stats(dev); - } - if (intr_status & IntrPCIErr) { - printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n", - dev->name, intr_status); - /* We must do a global reset of DMA to continue. */ - } -} - -static struct net_device_stats *get_stats(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base; - unsigned long flags; - u8 late_coll, single_coll, mult_coll; - - spin_lock_irqsave(&np->statlock, flags); - /* The chip only need report frame silently dropped. */ - dev->stats.rx_missed_errors += ioread8(ioaddr + RxMissed); - dev->stats.tx_packets += ioread16(ioaddr + TxFramesOK); - dev->stats.rx_packets += ioread16(ioaddr + RxFramesOK); - dev->stats.tx_carrier_errors += ioread8(ioaddr + StatsCarrierError); - - mult_coll = ioread8(ioaddr + StatsMultiColl); - np->xstats.tx_multiple_collisions += mult_coll; - single_coll = ioread8(ioaddr + StatsOneColl); - np->xstats.tx_single_collisions += single_coll; - late_coll = ioread8(ioaddr + StatsLateColl); - np->xstats.tx_late_collisions += late_coll; - dev->stats.collisions += mult_coll - + single_coll - + late_coll; - - np->xstats.tx_deferred += ioread8(ioaddr + StatsTxDefer); - np->xstats.tx_deferred_excessive += ioread8(ioaddr + StatsTxXSDefer); - np->xstats.tx_aborted += ioread8(ioaddr + StatsTxAbort); - np->xstats.tx_bcasts += ioread8(ioaddr + StatsBcastTx); - np->xstats.rx_bcasts += ioread8(ioaddr + StatsBcastRx); - np->xstats.tx_mcasts += ioread8(ioaddr + StatsMcastTx); - np->xstats.rx_mcasts += ioread8(ioaddr + StatsMcastRx); - - dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsLow); - dev->stats.tx_bytes += ioread16(ioaddr + TxOctetsHigh) << 16; - dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsLow); - dev->stats.rx_bytes += ioread16(ioaddr + RxOctetsHigh) << 16; - - spin_unlock_irqrestore(&np->statlock, flags); - - return &dev->stats; -} - -static void set_rx_mode(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base; - u16 mc_filter[4]; /* Multicast hash filter */ - u32 rx_mode; - int i; - - if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */ - memset(mc_filter, 0xff, sizeof(mc_filter)); - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptAll | AcceptMyPhys; - } else if ((netdev_mc_count(dev) > multicast_filter_limit) || - (dev->flags & IFF_ALLMULTI)) { - /* Too many to match, or accept all multicasts. */ - memset(mc_filter, 0xff, sizeof(mc_filter)); - rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; - } else if (!netdev_mc_empty(dev)) { - struct netdev_hw_addr *ha; - int bit; - int index; - int crc; - memset (mc_filter, 0, sizeof (mc_filter)); - netdev_for_each_mc_addr(ha, dev) { - crc = ether_crc_le(ETH_ALEN, ha->addr); - for (index=0, bit=0; bit < 6; bit++, crc <<= 1) - if (crc & 0x80000000) index |= 1 << bit; - mc_filter[index/16] |= (1 << (index % 16)); - } - rx_mode = AcceptBroadcast | AcceptMultiHash | AcceptMyPhys; - } else { - iowrite8(AcceptBroadcast | AcceptMyPhys, ioaddr + RxMode); - return; - } - if (np->mii_if.full_duplex && np->flowctrl) - mc_filter[3] |= 0x0200; - - for (i = 0; i < 4; i++) - iowrite16(mc_filter[i], ioaddr + MulticastFilter0 + i*2); - iowrite8(rx_mode, ioaddr + RxMode); -} - -static int __set_mac_addr(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - u16 addr16; - - addr16 = (dev->dev_addr[0] | (dev->dev_addr[1] << 8)); - iowrite16(addr16, np->base + StationAddr); - addr16 = (dev->dev_addr[2] | (dev->dev_addr[3] << 8)); - iowrite16(addr16, np->base + StationAddr+2); - addr16 = (dev->dev_addr[4] | (dev->dev_addr[5] << 8)); - iowrite16(addr16, np->base + StationAddr+4); - return 0; -} - -/* Invoked with rtnl_lock held */ -static int sundance_set_mac_addr(struct net_device *dev, void *data) -{ - const struct sockaddr *addr = data; - - if (!is_valid_ether_addr(addr->sa_data)) - return -EINVAL; - memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); - __set_mac_addr(dev); - - return 0; -} - -static const struct { - const char name[ETH_GSTRING_LEN]; -} sundance_stats[] = { - { "tx_multiple_collisions" }, - { "tx_single_collisions" }, - { "tx_late_collisions" }, - { "tx_deferred" }, - { "tx_deferred_excessive" }, - { "tx_aborted" }, - { "tx_bcasts" }, - { "rx_bcasts" }, - { "tx_mcasts" }, - { "rx_mcasts" }, -}; - -static int check_if_running(struct net_device *dev) -{ - if (!netif_running(dev)) - return -EINVAL; - return 0; -} - -static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) -{ - struct netdev_private *np = netdev_priv(dev); - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, pci_name(np->pci_dev)); -} - -static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct netdev_private *np = netdev_priv(dev); - spin_lock_irq(&np->lock); - mii_ethtool_gset(&np->mii_if, ecmd); - spin_unlock_irq(&np->lock); - return 0; -} - -static int set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) -{ - struct netdev_private *np = netdev_priv(dev); - int res; - spin_lock_irq(&np->lock); - res = mii_ethtool_sset(&np->mii_if, ecmd); - spin_unlock_irq(&np->lock); - return res; -} - -static int nway_reset(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - return mii_nway_restart(&np->mii_if); -} - -static u32 get_link(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - return mii_link_ok(&np->mii_if); -} - -static u32 get_msglevel(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - return np->msg_enable; -} - -static void set_msglevel(struct net_device *dev, u32 val) -{ - struct netdev_private *np = netdev_priv(dev); - np->msg_enable = val; -} - -static void get_strings(struct net_device *dev, u32 stringset, - u8 *data) -{ - if (stringset == ETH_SS_STATS) - memcpy(data, sundance_stats, sizeof(sundance_stats)); -} - -static int get_sset_count(struct net_device *dev, int sset) -{ - switch (sset) { - case ETH_SS_STATS: - return ARRAY_SIZE(sundance_stats); - default: - return -EOPNOTSUPP; - } -} - -static void get_ethtool_stats(struct net_device *dev, - struct ethtool_stats *stats, u64 *data) -{ - struct netdev_private *np = netdev_priv(dev); - int i = 0; - - get_stats(dev); - data[i++] = np->xstats.tx_multiple_collisions; - data[i++] = np->xstats.tx_single_collisions; - data[i++] = np->xstats.tx_late_collisions; - data[i++] = np->xstats.tx_deferred; - data[i++] = np->xstats.tx_deferred_excessive; - data[i++] = np->xstats.tx_aborted; - data[i++] = np->xstats.tx_bcasts; - data[i++] = np->xstats.rx_bcasts; - data[i++] = np->xstats.tx_mcasts; - data[i++] = np->xstats.rx_mcasts; -} - -static const struct ethtool_ops ethtool_ops = { - .begin = check_if_running, - .get_drvinfo = get_drvinfo, - .get_settings = get_settings, - .set_settings = set_settings, - .nway_reset = nway_reset, - .get_link = get_link, - .get_msglevel = get_msglevel, - .set_msglevel = set_msglevel, - .get_strings = get_strings, - .get_sset_count = get_sset_count, - .get_ethtool_stats = get_ethtool_stats, -}; - -static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct netdev_private *np = netdev_priv(dev); - int rc; - - if (!netif_running(dev)) - return -EINVAL; - - spin_lock_irq(&np->lock); - rc = generic_mii_ioctl(&np->mii_if, if_mii(rq), cmd, NULL); - spin_unlock_irq(&np->lock); - - return rc; -} - -static int netdev_close(struct net_device *dev) -{ - struct netdev_private *np = netdev_priv(dev); - void __iomem *ioaddr = np->base; - struct sk_buff *skb; - int i; - - /* Wait and kill tasklet */ - tasklet_kill(&np->rx_tasklet); - tasklet_kill(&np->tx_tasklet); - np->cur_tx = 0; - np->dirty_tx = 0; - np->cur_task = 0; - np->last_tx = NULL; - - netif_stop_queue(dev); - - if (netif_msg_ifdown(np)) { - printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %2.2x " - "Rx %4.4x Int %2.2x.\n", - dev->name, ioread8(ioaddr + TxStatus), - ioread32(ioaddr + RxStatus), ioread16(ioaddr + IntrStatus)); - printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n", - dev->name, np->cur_tx, np->dirty_tx, np->cur_rx, np->dirty_rx); - } - - /* Disable interrupts by clearing the interrupt mask. */ - iowrite16(0x0000, ioaddr + IntrEnable); - - /* Disable Rx and Tx DMA for safely release resource */ - iowrite32(0x500, ioaddr + DMACtrl); - - /* Stop the chip's Tx and Rx processes. */ - iowrite16(TxDisable | RxDisable | StatsDisable, ioaddr + MACCtrl1); - - for (i = 2000; i > 0; i--) { - if ((ioread32(ioaddr + DMACtrl) & 0xc000) == 0) - break; - mdelay(1); - } - - iowrite16(GlobalReset | DMAReset | FIFOReset | NetworkReset, - ioaddr + ASIC_HI_WORD(ASICCtrl)); - - for (i = 2000; i > 0; i--) { - if ((ioread16(ioaddr + ASIC_HI_WORD(ASICCtrl)) & ResetBusy) == 0) - break; - mdelay(1); - } - -#ifdef __i386__ - if (netif_msg_hw(np)) { - printk(KERN_DEBUG " Tx ring at %8.8x:\n", - (int)(np->tx_ring_dma)); - for (i = 0; i < TX_RING_SIZE; i++) - printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n", - i, np->tx_ring[i].status, np->tx_ring[i].frag[0].addr, - np->tx_ring[i].frag[0].length); - printk(KERN_DEBUG " Rx ring %8.8x:\n", - (int)(np->rx_ring_dma)); - for (i = 0; i < /*RX_RING_SIZE*/4 ; i++) { - printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n", - i, np->rx_ring[i].status, np->rx_ring[i].frag[0].addr, - np->rx_ring[i].frag[0].length); - } - } -#endif /* __i386__ debugging only */ - - free_irq(dev->irq, dev); - - del_timer_sync(&np->timer); - - /* Free all the skbuffs in the Rx queue. */ - for (i = 0; i < RX_RING_SIZE; i++) { - np->rx_ring[i].status = 0; - skb = np->rx_skbuff[i]; - if (skb) { - dma_unmap_single(&np->pci_dev->dev, - le32_to_cpu(np->rx_ring[i].frag[0].addr), - np->rx_buf_sz, DMA_FROM_DEVICE); - dev_kfree_skb(skb); - np->rx_skbuff[i] = NULL; - } - np->rx_ring[i].frag[0].addr = cpu_to_le32(0xBADF00D0); /* poison */ - } - for (i = 0; i < TX_RING_SIZE; i++) { - np->tx_ring[i].next_desc = 0; - skb = np->tx_skbuff[i]; - if (skb) { - dma_unmap_single(&np->pci_dev->dev, - le32_to_cpu(np->tx_ring[i].frag[0].addr), - skb->len, DMA_TO_DEVICE); - dev_kfree_skb(skb); - np->tx_skbuff[i] = NULL; - } - } - - return 0; -} - -static void __devexit sundance_remove1 (struct pci_dev *pdev) -{ - struct net_device *dev = pci_get_drvdata(pdev); - - if (dev) { - struct netdev_private *np = netdev_priv(dev); - unregister_netdev(dev); - dma_free_coherent(&pdev->dev, RX_TOTAL_SIZE, - np->rx_ring, np->rx_ring_dma); - dma_free_coherent(&pdev->dev, TX_TOTAL_SIZE, - np->tx_ring, np->tx_ring_dma); - pci_iounmap(pdev, np->base); - pci_release_regions(pdev); - free_netdev(dev); - pci_set_drvdata(pdev, NULL); - } -} - -#ifdef CONFIG_PM - -static int sundance_suspend(struct pci_dev *pci_dev, pm_message_t state) -{ - struct net_device *dev = pci_get_drvdata(pci_dev); - - if (!netif_running(dev)) - return 0; - - netdev_close(dev); - netif_device_detach(dev); - - pci_save_state(pci_dev); - pci_set_power_state(pci_dev, pci_choose_state(pci_dev, state)); - - return 0; -} - -static int sundance_resume(struct pci_dev *pci_dev) -{ - struct net_device *dev = pci_get_drvdata(pci_dev); - int err = 0; - - if (!netif_running(dev)) - return 0; - - pci_set_power_state(pci_dev, PCI_D0); - pci_restore_state(pci_dev); - - err = netdev_open(dev); - if (err) { - printk(KERN_ERR "%s: Can't resume interface!\n", - dev->name); - goto out; - } - - netif_device_attach(dev); - -out: - return err; -} - -#endif /* CONFIG_PM */ - -static struct pci_driver sundance_driver = { - .name = DRV_NAME, - .id_table = sundance_pci_tbl, - .probe = sundance_probe1, - .remove = __devexit_p(sundance_remove1), -#ifdef CONFIG_PM - .suspend = sundance_suspend, - .resume = sundance_resume, -#endif /* CONFIG_PM */ -}; - -static int __init sundance_init(void) -{ -/* when a module, this is printed whether or not devices are found in probe */ -#ifdef MODULE - printk(version); -#endif - return pci_register_driver(&sundance_driver); -} - -static void __exit sundance_exit(void) -{ - pci_unregister_driver(&sundance_driver); -} - -module_init(sundance_init); -module_exit(sundance_exit); - - -- cgit v1.2.3