From b299eb5cde1a91706c450804006c6559b0826df8 Mon Sep 17 00:00:00 2001 From: Durgadoss R Date: Thu, 3 Mar 2011 04:30:13 +0530 Subject: ACPI:Fix goto flows in thermal-sys This patch fixes two minor bugs in thermal_sys: (a) The flow of goto's in thermal_hwmon_add_sysfs. (b) Remove the temp*_crit only if there is a get_crit_temp defined, in thermal_remove_hwmon_sysfs. Signed-off-by: Durgadoss R Signed-off-by: Len Brown --- drivers/thermal/thermal_sys.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 713b7ea4a607..0b1c82ad6805 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -499,7 +499,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) dev_set_drvdata(hwmon->device, hwmon); result = device_create_file(hwmon->device, &dev_attr_name); if (result) - goto unregister_hwmon_device; + goto free_mem; register_sys_interface: tz->hwmon = hwmon; @@ -513,7 +513,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) sysfs_attr_init(&tz->temp_input.attr.attr); result = device_create_file(hwmon->device, &tz->temp_input.attr); if (result) - goto unregister_hwmon_device; + goto unregister_name; if (tz->ops->get_crit_temp) { unsigned long temperature; @@ -527,7 +527,7 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) result = device_create_file(hwmon->device, &tz->temp_crit.attr); if (result) - goto unregister_hwmon_device; + goto unregister_input; } } @@ -539,9 +539,9 @@ thermal_add_hwmon_sysfs(struct thermal_zone_device *tz) return 0; - unregister_hwmon_device: - device_remove_file(hwmon->device, &tz->temp_crit.attr); + unregister_input: device_remove_file(hwmon->device, &tz->temp_input.attr); + unregister_name: if (new_hwmon_device) { device_remove_file(hwmon->device, &dev_attr_name); hwmon_device_unregister(hwmon->device); @@ -560,7 +560,8 @@ thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) tz->hwmon = NULL; device_remove_file(hwmon->device, &tz->temp_input.attr); - device_remove_file(hwmon->device, &tz->temp_crit.attr); + if (tz->ops->get_crit_temp) + device_remove_file(hwmon->device, &tz->temp_crit.attr); mutex_lock(&thermal_list_lock); list_del(&tz->hwmon_node); -- cgit v1.2.3 From 9f63b88bd7a1ac1afbb4358772a39abaeddbdd13 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 23 Mar 2011 17:26:34 +0800 Subject: ACPI: osl, add acpi_os_create_lock interface Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/osl.c | 33 +++++++++++++++++++++++++-------- include/acpi/acpiosxf.h | 3 +++ 2 files changed, 28 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index c90c76aa7f8b..cf750a7a9523 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -883,14 +883,6 @@ void acpi_os_wait_events_complete(void *context) EXPORT_SYMBOL(acpi_os_wait_events_complete); -/* - * Deallocate the memory for a spinlock. - */ -void acpi_os_delete_lock(acpi_spinlock handle) -{ - return; -} - acpi_status acpi_os_create_semaphore(u32 max_units, u32 initial_units, acpi_handle * handle) { @@ -1321,6 +1313,31 @@ int acpi_resources_are_enforced(void) } EXPORT_SYMBOL(acpi_resources_are_enforced); +/* + * Create and initialize a spinlock. + */ +acpi_status +acpi_os_create_lock(acpi_spinlock *out_handle) +{ + spinlock_t *lock; + + lock = ACPI_ALLOCATE(sizeof(spinlock_t)); + if (!lock) + return AE_NO_MEMORY; + spin_lock_init(lock); + *out_handle = lock; + + return AE_OK; +} + +/* + * Deallocate the memory for a spinlock. + */ +void acpi_os_delete_lock(acpi_spinlock handle) +{ + ACPI_FREE(handle); +} + /* * Acquire a spinlock. * diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h index a3252a5ead66..a756bc8d866d 100644 --- a/include/acpi/acpiosxf.h +++ b/include/acpi/acpiosxf.h @@ -98,6 +98,9 @@ acpi_os_table_override(struct acpi_table_header *existing_table, /* * Spinlock primitives */ +acpi_status +acpi_os_create_lock(acpi_spinlock *out_handle); + void acpi_os_delete_lock(acpi_spinlock handle); acpi_cpu_flags acpi_os_acquire_lock(acpi_spinlock handle); -- cgit v1.2.3 From 3854c8e32f46ffa6ee0bf2eb01137f5a48b2754f Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 23 Mar 2011 17:26:35 +0800 Subject: ACPICA: Use acpi_os_create_lock interface Replace spin_lock_init with acpi_os_create_lock. Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acglobal.h | 9 +++------ drivers/acpi/acpica/utmutex.c | 17 ++++++++++++++--- 2 files changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index d69750b83b36..6d512fcabdbe 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -226,12 +226,9 @@ ACPI_EXTERN u8 acpi_gbl_global_lock_present; * Spinlocks are used for interfaces that can be possibly called at * interrupt level */ -ACPI_EXTERN spinlock_t _acpi_gbl_gpe_lock; /* For GPE data structs and registers */ -ACPI_EXTERN spinlock_t _acpi_gbl_hardware_lock; /* For ACPI H/W except GPE registers */ -ACPI_EXTERN spinlock_t _acpi_ev_global_lock_pending_lock; /* For global lock */ -#define acpi_gbl_gpe_lock &_acpi_gbl_gpe_lock -#define acpi_gbl_hardware_lock &_acpi_gbl_hardware_lock -#define acpi_ev_global_lock_pending_lock &_acpi_ev_global_lock_pending_lock +ACPI_EXTERN acpi_spinlock acpi_gbl_gpe_lock; /* For GPE data structs and registers */ +ACPI_EXTERN acpi_spinlock acpi_gbl_hardware_lock; /* For ACPI H/W except GPE registers */ +ACPI_EXTERN acpi_spinlock acpi_ev_global_lock_pending_lock; /* For global lock */ /***************************************************************************** * diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c index a946c689f03b..519d4ee9b45a 100644 --- a/drivers/acpi/acpica/utmutex.c +++ b/drivers/acpi/acpica/utmutex.c @@ -83,9 +83,20 @@ acpi_status acpi_ut_mutex_initialize(void) /* Create the spinlocks for use at interrupt level */ - spin_lock_init(acpi_gbl_gpe_lock); - spin_lock_init(acpi_gbl_hardware_lock); - spin_lock_init(acpi_ev_global_lock_pending_lock); + status = acpi_os_create_lock (&acpi_gbl_gpe_lock); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + + status = acpi_os_create_lock (&acpi_gbl_hardware_lock); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } + + status = acpi_os_create_lock (&acpi_ev_global_lock_pending_lock); + if (ACPI_FAILURE (status)) { + return_ACPI_STATUS (status); + } /* Mutex for _OSI support */ status = acpi_os_create_mutex(&acpi_gbl_osi_mutex); -- cgit v1.2.3 From 749c27639b95c5c4a8185e02a4efb189034944ed Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 23 Mar 2011 17:26:36 +0800 Subject: ACPICA: Fix code divergence of global lock handling Commit 9cd0314(ACPI / ACPICA: Fix global lock acquisition) was backported into ACPICA code base, and some divergence was introduced. This patch fixed it, - rename acpi_ev_global_lock_pending/acpi_ev_global_lock_pending_lock to acpi_gbl_global_lock_pending/acpi_gbl_global_lock_pending_lock. - move the initialization of acpi_gbl_global_lock_pending_lock from acpi_ut_mutex_initialize to acpi_ev_init_global_lock_handler. Signed-off-by: Lin Ming Reviewed-by: Rafael J. Wysocki Signed-off-by: Len Brown --- drivers/acpi/acpica/acglobal.h | 6 ++-- drivers/acpi/acpica/evmisc.c | 74 +++++++++++++++++++++++------------------- drivers/acpi/acpica/utmutex.c | 5 --- 3 files changed, 44 insertions(+), 41 deletions(-) diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 6d512fcabdbe..73863d86f022 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -214,13 +214,16 @@ ACPI_EXTERN struct acpi_mutex_info acpi_gbl_mutex_info[ACPI_NUM_MUTEX]; /* * Global lock mutex is an actual AML mutex object - * Global lock semaphore works in conjunction with the HW global lock + * Global lock semaphore works in conjunction with the actual global lock + * Global lock spinlock is used for "pending" handshake */ ACPI_EXTERN union acpi_operand_object *acpi_gbl_global_lock_mutex; ACPI_EXTERN acpi_semaphore acpi_gbl_global_lock_semaphore; +ACPI_EXTERN acpi_spinlock acpi_gbl_global_lock_pending_lock; ACPI_EXTERN u16 acpi_gbl_global_lock_handle; ACPI_EXTERN u8 acpi_gbl_global_lock_acquired; ACPI_EXTERN u8 acpi_gbl_global_lock_present; +ACPI_EXTERN u8 acpi_gbl_global_lock_pending; /* * Spinlocks are used for interfaces that can be possibly called at @@ -228,7 +231,6 @@ ACPI_EXTERN u8 acpi_gbl_global_lock_present; */ ACPI_EXTERN acpi_spinlock acpi_gbl_gpe_lock; /* For GPE data structs and registers */ ACPI_EXTERN acpi_spinlock acpi_gbl_hardware_lock; /* For ACPI H/W except GPE registers */ -ACPI_EXTERN acpi_spinlock acpi_ev_global_lock_pending_lock; /* For global lock */ /***************************************************************************** * diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index 7dc80946f7bd..69a3b4aa862b 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -284,39 +284,41 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) * RETURN: ACPI_INTERRUPT_HANDLED * * DESCRIPTION: Invoked directly from the SCI handler when a global lock - * release interrupt occurs. If there's a thread waiting for - * the global lock, signal it. - * - * NOTE: Assumes that the semaphore can be signaled from interrupt level. If - * this is not possible for some reason, a separate thread will have to be - * scheduled to do this. + * release interrupt occurs. If there is actually a pending + * request for the lock, signal the waiting thread. * ******************************************************************************/ -static u8 acpi_ev_global_lock_pending; static u32 acpi_ev_global_lock_handler(void *context) { acpi_status status; acpi_cpu_flags flags; - flags = acpi_os_acquire_lock(acpi_ev_global_lock_pending_lock); + flags = acpi_os_acquire_lock(acpi_gbl_global_lock_pending_lock); - if (!acpi_ev_global_lock_pending) { - goto out; + /* + * If a request for the global lock is not actually pending, + * we are done. This handles "spurious" global lock interrupts + * which are possible (and have been seen) with bad BIOSs. + */ + if (!acpi_gbl_global_lock_pending) { + goto cleanup_and_exit; } - /* Send a unit to the semaphore */ - + /* + * Send a unit to the global lock semaphore. The actual acquisition + * of the global lock will be performed by the waiting thread. + */ status = acpi_os_signal_semaphore(acpi_gbl_global_lock_semaphore, 1); if (ACPI_FAILURE(status)) { ACPI_ERROR((AE_INFO, "Could not signal Global Lock semaphore")); } - acpi_ev_global_lock_pending = FALSE; + acpi_gbl_global_lock_pending = FALSE; - out: - acpi_os_release_lock(acpi_ev_global_lock_pending_lock, flags); +cleanup_and_exit: + acpi_os_release_lock(acpi_gbl_global_lock_pending_lock, flags); return (ACPI_INTERRUPT_HANDLED); } @@ -350,14 +352,20 @@ acpi_status acpi_ev_init_global_lock_handler(void) * Map to AE_OK, but mark global lock as not present. Any attempt to * actually use the global lock will be flagged with an error. */ + acpi_gbl_global_lock_present = FALSE; if (status == AE_NO_HARDWARE_RESPONSE) { ACPI_ERROR((AE_INFO, "No response from Global Lock hardware, disabling lock")); - acpi_gbl_global_lock_present = FALSE; return_ACPI_STATUS(AE_OK); } + status = acpi_os_create_lock(&acpi_gbl_global_lock_pending_lock); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_gbl_global_lock_pending = FALSE; acpi_gbl_global_lock_present = TRUE; return_ACPI_STATUS(status); } @@ -414,7 +422,7 @@ static int acpi_ev_global_lock_acquired; acpi_status acpi_ev_acquire_global_lock(u16 timeout) { acpi_cpu_flags flags; - acpi_status status = AE_OK; + acpi_status status; u8 acquired = FALSE; ACPI_FUNCTION_TRACE(ev_acquire_global_lock); @@ -458,15 +466,15 @@ acpi_status acpi_ev_acquire_global_lock(u16 timeout) } /* - * Make sure that a global lock actually exists. If not, just treat the - * lock as a standard mutex. + * Make sure that a global lock actually exists. If not, just + * treat the lock as a standard mutex. */ if (!acpi_gbl_global_lock_present) { acpi_gbl_global_lock_acquired = TRUE; return_ACPI_STATUS(AE_OK); } - flags = acpi_os_acquire_lock(acpi_ev_global_lock_pending_lock); + flags = acpi_os_acquire_lock(acpi_gbl_global_lock_pending_lock); do { @@ -475,20 +483,19 @@ acpi_status acpi_ev_acquire_global_lock(u16 timeout) ACPI_ACQUIRE_GLOBAL_LOCK(acpi_gbl_FACS, acquired); if (acquired) { acpi_gbl_global_lock_acquired = TRUE; - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Acquired hardware Global Lock\n")); break; } - acpi_ev_global_lock_pending = TRUE; - - acpi_os_release_lock(acpi_ev_global_lock_pending_lock, flags); - /* - * Did not get the lock. The pending bit was set above, and we - * must wait until we get the global lock released interrupt. + * Did not get the lock. The pending bit was set above, and + * we must now wait until we receive the global lock + * released interrupt. */ + acpi_gbl_global_lock_pending = TRUE; + acpi_os_release_lock(acpi_gbl_global_lock_pending_lock, flags); + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Waiting for hardware Global Lock\n")); @@ -496,17 +503,16 @@ acpi_status acpi_ev_acquire_global_lock(u16 timeout) * Wait for handshake with the global lock interrupt handler. * This interface releases the interpreter if we must wait. */ - status = acpi_ex_system_wait_semaphore( - acpi_gbl_global_lock_semaphore, - ACPI_WAIT_FOREVER); + status = + acpi_ex_system_wait_semaphore + (acpi_gbl_global_lock_semaphore, ACPI_WAIT_FOREVER); - flags = acpi_os_acquire_lock(acpi_ev_global_lock_pending_lock); + flags = acpi_os_acquire_lock(acpi_gbl_global_lock_pending_lock); } while (ACPI_SUCCESS(status)); - acpi_ev_global_lock_pending = FALSE; - - acpi_os_release_lock(acpi_ev_global_lock_pending_lock, flags); + acpi_gbl_global_lock_pending = FALSE; + acpi_os_release_lock(acpi_gbl_global_lock_pending_lock, flags); return_ACPI_STATUS(status); } diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c index 519d4ee9b45a..7d797e2baecd 100644 --- a/drivers/acpi/acpica/utmutex.c +++ b/drivers/acpi/acpica/utmutex.c @@ -93,11 +93,6 @@ acpi_status acpi_ut_mutex_initialize(void) return_ACPI_STATUS (status); } - status = acpi_os_create_lock (&acpi_ev_global_lock_pending_lock); - if (ACPI_FAILURE (status)) { - return_ACPI_STATUS (status); - } - /* Mutex for _OSI support */ status = acpi_os_create_mutex(&acpi_gbl_osi_mutex); if (ACPI_FAILURE(status)) { -- cgit v1.2.3 From 84adccfb8cd2a6b8237da6752668ba25cd90c20b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 24 Mar 2011 11:32:15 +0530 Subject: dmaengine/dw_dmac fix: dwc_scan_descriptors must compare first desc address also with llp dwc_scan_descriptors scans all descriptors from active_list in case transfer is not completed. It compares first_desc->lli.llp, and then all childrens of its tx_list. But it doesn't compare its own address, i.e. first_desc->txd.phys, as this is what we have initially programmed into the controller register. So this causes dma to stop and finish a transfer, which was never started. And thus fail. Signed-off-by: Viresh Kumar Signed-off-by: Vinod Koul --- drivers/dma/dw_dmac.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 9c25c7d099e4..b15c32ca0efa 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -304,6 +304,11 @@ static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc) dev_vdbg(chan2dev(&dwc->chan), "scan_descriptors: llp=0x%x\n", llp); list_for_each_entry_safe(desc, _desc, &dwc->active_list, desc_node) { + /* check first descriptors addr */ + if (desc->txd.phys == llp) + return; + + /* check first descriptors llp */ if (desc->lli.llp == llp) /* This one is currently in progress */ return; -- cgit v1.2.3 From e2ec771a99a5cf231c9dea4da26238bf073e1e9c Mon Sep 17 00:00:00 2001 From: Coly Li Date: Sun, 27 Mar 2011 01:26:52 +0800 Subject: dma: use BUG_ON correctly in iop-adma.c, v4 This patch makes BUG_ON() usage correct in drivers/dma/iop-adma.c. Cc: Dan Williams Cc: Vinod Koul Signed-off-by: Coly Li Signed-off-by: Vinod Koul --- drivers/dma/iop-adma.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c index c6b01f535b29..e03f811a83dd 100644 --- a/drivers/dma/iop-adma.c +++ b/drivers/dma/iop-adma.c @@ -619,7 +619,7 @@ iop_adma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dma_dest, if (unlikely(!len)) return NULL; - BUG_ON(unlikely(len > IOP_ADMA_MAX_BYTE_COUNT)); + BUG_ON(len > IOP_ADMA_MAX_BYTE_COUNT); dev_dbg(iop_chan->device->common.dev, "%s len: %u\n", __func__, len); @@ -652,7 +652,7 @@ iop_adma_prep_dma_memset(struct dma_chan *chan, dma_addr_t dma_dest, if (unlikely(!len)) return NULL; - BUG_ON(unlikely(len > IOP_ADMA_MAX_BYTE_COUNT)); + BUG_ON(len > IOP_ADMA_MAX_BYTE_COUNT); dev_dbg(iop_chan->device->common.dev, "%s len: %u\n", __func__, len); @@ -686,7 +686,7 @@ iop_adma_prep_dma_xor(struct dma_chan *chan, dma_addr_t dma_dest, if (unlikely(!len)) return NULL; - BUG_ON(unlikely(len > IOP_ADMA_XOR_MAX_BYTE_COUNT)); + BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT); dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %u flags: %lx\n", -- cgit v1.2.3 From 7912d30007d0c958bcf11cd5ce19f77856cf041b Mon Sep 17 00:00:00 2001 From: Coly Li Date: Sun, 27 Mar 2011 01:26:53 +0800 Subject: dma: use BUG_ON correctly in mv_xor.c, v4 This patch makes BUG_ON() usage correct in drivers/dma/mv_xor.c Cc: Vinod Koul Cc: Dan Williams Signed-off-by: Coly Li Signed-off-by: Vinod Koul --- drivers/dma/mv_xor.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index a25f5f61e0e0..954e334e01bb 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -671,7 +671,7 @@ mv_xor_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, if (unlikely(len < MV_XOR_MIN_BYTE_COUNT)) return NULL; - BUG_ON(unlikely(len > MV_XOR_MAX_BYTE_COUNT)); + BUG_ON(len > MV_XOR_MAX_BYTE_COUNT); spin_lock_bh(&mv_chan->lock); slot_cnt = mv_chan_memcpy_slot_count(len); @@ -710,7 +710,7 @@ mv_xor_prep_dma_memset(struct dma_chan *chan, dma_addr_t dest, int value, if (unlikely(len < MV_XOR_MIN_BYTE_COUNT)) return NULL; - BUG_ON(unlikely(len > MV_XOR_MAX_BYTE_COUNT)); + BUG_ON(len > MV_XOR_MAX_BYTE_COUNT); spin_lock_bh(&mv_chan->lock); slot_cnt = mv_chan_memset_slot_count(len); @@ -744,7 +744,7 @@ mv_xor_prep_dma_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src, if (unlikely(len < MV_XOR_MIN_BYTE_COUNT)) return NULL; - BUG_ON(unlikely(len > MV_XOR_MAX_BYTE_COUNT)); + BUG_ON(len > MV_XOR_MAX_BYTE_COUNT); dev_dbg(mv_chan->device->common.dev, "%s src_cnt: %d len: dest %x %u flags: %ld\n", -- cgit v1.2.3 From 427cdf19b97e509e21e5d347e18d8b0b34723dfc Mon Sep 17 00:00:00 2001 From: Coly Li Date: Sun, 27 Mar 2011 01:26:54 +0800 Subject: dma: use BUG_ON correctly in ppc4xx/adam.c, v4 This patch makes BUG_ON() usage correct in drivers/dma/ppc4xx/adam.c Cc: Vinod Koul Cc: Dan Williams Cc: Grant Likely Cc: Anatolij Gustschin Cc: Sean MacLennan Cc: Joe Perches Signed-off-by: Coly Li Signed-off-by: Vinod Koul --- drivers/dma/ppc4xx/adma.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c index cef584533ee8..a2b62e93a143 100644 --- a/drivers/dma/ppc4xx/adma.c +++ b/drivers/dma/ppc4xx/adma.c @@ -2313,7 +2313,7 @@ static struct dma_async_tx_descriptor *ppc440spe_adma_prep_dma_memcpy( if (unlikely(!len)) return NULL; - BUG_ON(unlikely(len > PPC440SPE_ADMA_DMA_MAX_BYTE_COUNT)); + BUG_ON(len > PPC440SPE_ADMA_DMA_MAX_BYTE_COUNT); spin_lock_bh(&ppc440spe_chan->lock); @@ -2354,7 +2354,7 @@ static struct dma_async_tx_descriptor *ppc440spe_adma_prep_dma_memset( if (unlikely(!len)) return NULL; - BUG_ON(unlikely(len > PPC440SPE_ADMA_DMA_MAX_BYTE_COUNT)); + BUG_ON(len > PPC440SPE_ADMA_DMA_MAX_BYTE_COUNT); spin_lock_bh(&ppc440spe_chan->lock); @@ -2397,7 +2397,7 @@ static struct dma_async_tx_descriptor *ppc440spe_adma_prep_dma_xor( dma_dest, dma_src, src_cnt)); if (unlikely(!len)) return NULL; - BUG_ON(unlikely(len > PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT)); + BUG_ON(len > PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT); dev_dbg(ppc440spe_chan->device->common.dev, "ppc440spe adma%d: %s src_cnt: %d len: %u int_en: %d\n", @@ -2887,7 +2887,7 @@ static struct dma_async_tx_descriptor *ppc440spe_adma_prep_dma_pq( ADMA_LL_DBG(prep_dma_pq_dbg(ppc440spe_chan->device->id, dst, src, src_cnt)); BUG_ON(!len); - BUG_ON(unlikely(len > PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT)); + BUG_ON(len > PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT); BUG_ON(!src_cnt); if (src_cnt == 1 && dst[1] == src[0]) { -- cgit v1.2.3 From 1cb7b1e0de6a1f8f071f4a146e3d10f3a662f707 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Thu, 31 Mar 2011 13:36:38 +0200 Subject: ACPI EC: remove dead code static void acpi_ec_gpe_query(void *ec_cxt); -> The function is right above this declaration -> not needed. poll_force is also not used, cleaned up in ec.c and its users: compal-laptop and msi-laptop. Signed-off-by: Thomas Renninger Signed-off-by: Len Brown --- drivers/acpi/ec.c | 6 +----- drivers/platform/x86/compal-laptop.c | 12 ++++++------ drivers/platform/x86/msi-laptop.c | 12 ++++++------ include/linux/acpi.h | 3 +-- 4 files changed, 14 insertions(+), 19 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index fa848c4116a8..b3f1d6f52a89 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -69,7 +69,6 @@ enum ec_command { #define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */ #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */ -#define ACPI_EC_CDELAY 10 /* Wait 10us before polling EC */ #define ACPI_EC_MSI_UDELAY 550 /* Wait 550us for MSI EC */ #define ACPI_EC_STORM_THRESHOLD 8 /* number of false interrupts @@ -433,8 +432,7 @@ EXPORT_SYMBOL(ec_write); int ec_transaction(u8 command, const u8 * wdata, unsigned wdata_len, - u8 * rdata, unsigned rdata_len, - int force_poll) + u8 * rdata, unsigned rdata_len) { struct transaction t = {.command = command, .wdata = wdata, .rdata = rdata, @@ -592,8 +590,6 @@ static void acpi_ec_gpe_query(void *ec_cxt) mutex_unlock(&ec->lock); } -static void acpi_ec_gpe_query(void *ec_cxt); - static int ec_check_sci(struct acpi_ec *ec, u8 state) { if (state & ACPI_EC_FLAG_SCI) { diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index 034572b980c9..f4f43e65475f 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -200,7 +200,7 @@ static bool extra_features; * watching the output of address 0x4F (do an ec_transaction writing 0x33 * into 0x4F and read a few bytes from the output, like so: * u8 writeData = 0x33; - * ec_transaction(0x4F, &writeData, 1, buffer, 32, 0); + * ec_transaction(0x4F, &writeData, 1, buffer, 32); * That address is labled "fan1 table information" in the service manual. * It should be clear which value in 'buffer' changes). This seems to be * related to fan speed. It isn't a proper 'realtime' fan speed value @@ -286,7 +286,7 @@ static int get_backlight_level(void) static void set_backlight_state(bool on) { u8 data = on ? BACKLIGHT_STATE_ON_DATA : BACKLIGHT_STATE_OFF_DATA; - ec_transaction(BACKLIGHT_STATE_ADDR, &data, 1, NULL, 0, 0); + ec_transaction(BACKLIGHT_STATE_ADDR, &data, 1, NULL, 0); } @@ -294,24 +294,24 @@ static void set_backlight_state(bool on) static void pwm_enable_control(void) { unsigned char writeData = PWM_ENABLE_DATA; - ec_transaction(PWM_ENABLE_ADDR, &writeData, 1, NULL, 0, 0); + ec_transaction(PWM_ENABLE_ADDR, &writeData, 1, NULL, 0); } static void pwm_disable_control(void) { unsigned char writeData = PWM_DISABLE_DATA; - ec_transaction(PWM_DISABLE_ADDR, &writeData, 1, NULL, 0, 0); + ec_transaction(PWM_DISABLE_ADDR, &writeData, 1, NULL, 0); } static void set_pwm(int pwm) { - ec_transaction(PWM_ADDRESS, &pwm_lookup_table[pwm], 1, NULL, 0, 0); + ec_transaction(PWM_ADDRESS, &pwm_lookup_table[pwm], 1, NULL, 0); } static int get_fan_rpm(void) { u8 value, data = FAN_DATA; - ec_transaction(FAN_ADDRESS, &data, 1, &value, 1, 0); + ec_transaction(FAN_ADDRESS, &data, 1, &value, 1); return 100 * (int)value; } diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c index 7e9bb6df9d39..918a65dd2ab3 100644 --- a/drivers/platform/x86/msi-laptop.c +++ b/drivers/platform/x86/msi-laptop.c @@ -120,7 +120,7 @@ static int set_lcd_level(int level) buf[1] = (u8) (level*31); return ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, buf, sizeof(buf), - NULL, 0, 1); + NULL, 0); } static int get_lcd_level(void) @@ -129,7 +129,7 @@ static int get_lcd_level(void) int result; result = ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, &wdata, 1, - &rdata, 1, 1); + &rdata, 1); if (result < 0) return result; @@ -142,7 +142,7 @@ static int get_auto_brightness(void) int result; result = ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, &wdata, 1, - &rdata, 1, 1); + &rdata, 1); if (result < 0) return result; @@ -157,7 +157,7 @@ static int set_auto_brightness(int enable) wdata[0] = 4; result = ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, wdata, 1, - &rdata, 1, 1); + &rdata, 1); if (result < 0) return result; @@ -165,7 +165,7 @@ static int set_auto_brightness(int enable) wdata[1] = (rdata & 0xF7) | (enable ? 8 : 0); return ec_transaction(MSI_EC_COMMAND_LCD_LEVEL, wdata, 2, - NULL, 0, 1); + NULL, 0); } static ssize_t set_device_state(const char *buf, size_t count, u8 mask) @@ -202,7 +202,7 @@ static int get_wireless_state(int *wlan, int *bluetooth) u8 wdata = 0, rdata; int result; - result = ec_transaction(MSI_EC_COMMAND_WIRELESS, &wdata, 1, &rdata, 1, 1); + result = ec_transaction(MSI_EC_COMMAND_WIRELESS, &wdata, 1, &rdata, 1); if (result < 0) return -1; diff --git a/include/linux/acpi.h b/include/linux/acpi.h index a2e910e01293..1deb2a73c2da 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -150,8 +150,7 @@ extern int ec_read(u8 addr, u8 *val); extern int ec_write(u8 addr, u8 val); extern int ec_transaction(u8 command, const u8 *wdata, unsigned wdata_len, - u8 *rdata, unsigned rdata_len, - int force_poll); + u8 *rdata, unsigned rdata_len); #if defined(CONFIG_ACPI_WMI) || defined(CONFIG_ACPI_WMI_MODULE) -- cgit v1.2.3 From e2142df7ec7184ed4a77ada686bc1eb41075490f Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Thu, 31 Mar 2011 11:02:43 -0700 Subject: intel_mid_dma: fix runtime pm issues Use the correct api in probe to enable runtime pm for this driver. Additionally, do not just call legacy suspend for runtime_suspend, as this duplicates some work the pci core does for you. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Vinod Koul --- drivers/dma/intel_mid_dma.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c index 798f46a4590d..f153adfcaceb 100644 --- a/drivers/dma/intel_mid_dma.c +++ b/drivers/dma/intel_mid_dma.c @@ -1292,8 +1292,7 @@ static int __devinit intel_mid_dma_probe(struct pci_dev *pdev, if (err) goto err_dma; - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); pm_runtime_allow(&pdev->dev); return 0; @@ -1322,6 +1321,9 @@ err_enable_device: static void __devexit intel_mid_dma_remove(struct pci_dev *pdev) { struct middma_device *device = pci_get_drvdata(pdev); + + pm_runtime_get_noresume(&pdev->dev); + pm_runtime_forbid(&pdev->dev); middma_shutdown(pdev); pci_dev_put(pdev); kfree(device); @@ -1385,13 +1387,20 @@ int dma_resume(struct pci_dev *pci) static int dma_runtime_suspend(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - return dma_suspend(pci_dev, PMSG_SUSPEND); + struct middma_device *device = pci_get_drvdata(pci_dev); + + device->state = SUSPENDED; + return 0; } static int dma_runtime_resume(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); - return dma_resume(pci_dev); + struct middma_device *device = pci_get_drvdata(pci_dev); + + device->state = RUNNING; + iowrite32(REG_BIT0, device->dma_base + DMA_CFG); + return 0; } static int dma_runtime_idle(struct device *dev) -- cgit v1.2.3 From 364de77831213be20f7f33c39ca1c194593b5c11 Mon Sep 17 00:00:00 2001 From: Liu Yuan Date: Sat, 2 Apr 2011 14:20:47 +0800 Subject: drivers, pch_dma: Fix uninitialized var before use In the function pdc_desc_get(), var 'i' is not initialized before use. This patch fixes it. Signed-off-by: Liu Yuan Signed-off-by: Vinod Koul --- drivers/dma/pch_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index 8d8fef1480a9..6eebc6205c65 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -403,7 +403,7 @@ static struct pch_dma_desc *pdc_desc_get(struct pch_dma_chan *pd_chan) { struct pch_dma_desc *desc, *_d; struct pch_dma_desc *ret = NULL; - int i; + int i = 0; spin_lock(&pd_chan->lock); list_for_each_entry_safe(desc, _d, &pd_chan->free_list, desc_node) { -- cgit v1.2.3 From 0601f793921157603831d00a9541d92e8f5763f6 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 18 May 2009 17:47:56 -0400 Subject: SUNRPC: requeue tcp socket less frequently Don't requeue the socket in some cases where we know it's unnecessary. Signed-off-by: Trond Myklebust Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index b7d435c3f19e..7a3e4bfd895d 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -965,7 +965,6 @@ static int svc_tcp_recv_record(struct svc_sock *svsk, struct svc_rqst *rqstp) goto err_again; /* record not complete */ } len = svsk->sk_reclen; - set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); return len; error: @@ -1115,6 +1114,10 @@ out: /* Reset TCP read info */ svsk->sk_reclen = 0; svsk->sk_tcplen = 0; + /* If we have more data, signal svc_xprt_enqueue() to try again */ + if (svc_recv_available(svsk) > sizeof(rpc_fraghdr)) + set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); + svc_xprt_copy_addrs(rqstp, &svsk->sk_xprt); if (serv->sv_stats) -- cgit v1.2.3 From 5ee78d483c5812228e971e145b912e0a7e35e571 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 18 May 2009 17:47:56 -0400 Subject: SUNRPC: svc_tcp_recvfrom cleanup Minor cleanup in preparation for later patches. Signed-off-by: Trond Myklebust Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 34 +++++++++++++++------------------- 1 file changed, 15 insertions(+), 19 deletions(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 7a3e4bfd895d..733c2f6a1858 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -893,6 +893,7 @@ failed: static int svc_tcp_recv_record(struct svc_sock *svsk, struct svc_rqst *rqstp) { struct svc_serv *serv = svsk->sk_xprt.xpt_server; + unsigned int want; int len; if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags)) @@ -915,9 +916,9 @@ static int svc_tcp_recv_record(struct svc_sock *svsk, struct svc_rqst *rqstp) clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); if (svsk->sk_tcplen < sizeof(rpc_fraghdr)) { - int want = sizeof(rpc_fraghdr) - svsk->sk_tcplen; struct kvec iov; + want = sizeof(rpc_fraghdr) - svsk->sk_tcplen; iov.iov_base = ((char *) &svsk->sk_reclen) + svsk->sk_tcplen; iov.iov_len = want; if ((len = svc_recvfrom(rqstp, &iov, 1, want)) < 0) @@ -1040,8 +1041,9 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) struct svc_serv *serv = svsk->sk_xprt.xpt_server; int len; struct kvec *vec; - int pnum, vlen; struct rpc_rqst *req = NULL; + unsigned int vlen; + int pnum; dprintk("svc: tcp_recv %p data %d conn %d close %d\n", svsk, test_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags), @@ -1072,7 +1074,7 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) } pnum = 1; - while (vlen < len) { + while (vlen < svsk->sk_reclen - 8) { vec[pnum].iov_base = (req) ? page_address(req->rq_private_buf.pages[pnum - 1]) : page_address(rqstp->rq_pages[pnum]); @@ -1083,29 +1085,23 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) rqstp->rq_respages = &rqstp->rq_pages[pnum]; /* Now receive data */ - len = svc_recvfrom(rqstp, vec, pnum, len); + len = svc_recvfrom(rqstp, vec, pnum, svsk->sk_reclen - 8); if (len < 0) goto err_again; - /* - * Account for the 8 bytes we read earlier - */ - len += 8; - if (req) { - xprt_complete_rqst(req->rq_task, len); - len = 0; + xprt_complete_rqst(req->rq_task, svsk->sk_reclen); + rqstp->rq_arg.len = 0; goto out; } - dprintk("svc: TCP complete record (%d bytes)\n", len); - rqstp->rq_arg.len = len; + dprintk("svc: TCP complete record (%d bytes)\n", svsk->sk_reclen); + rqstp->rq_arg.len = svsk->sk_reclen; rqstp->rq_arg.page_base = 0; - if (len <= rqstp->rq_arg.head[0].iov_len) { - rqstp->rq_arg.head[0].iov_len = len; + if (rqstp->rq_arg.len <= rqstp->rq_arg.head[0].iov_len) { + rqstp->rq_arg.head[0].iov_len = rqstp->rq_arg.len; rqstp->rq_arg.page_len = 0; - } else { - rqstp->rq_arg.page_len = len - rqstp->rq_arg.head[0].iov_len; - } + } else + rqstp->rq_arg.page_len = rqstp->rq_arg.len - rqstp->rq_arg.head[0].iov_len; rqstp->rq_xprt_ctxt = NULL; rqstp->rq_prot = IPPROTO_TCP; @@ -1123,7 +1119,7 @@ out: if (serv->sv_stats) serv->sv_stats->nettcpcnt++; - return len; + return rqstp->rq_arg.len; err_again: if (len == -EAGAIN) { -- cgit v1.2.3 From 48e6555c7b3bf0d92f8167d8b8b8ecf4a3fdab84 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 14 Feb 2011 14:52:03 -0500 Subject: svcrpc: note network-order types in svc_process_calldir Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 733c2f6a1858..1955e1a1e390 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -982,9 +982,9 @@ static int svc_process_calldir(struct svc_sock *svsk, struct svc_rqst *rqstp, struct rpc_rqst **reqpp, struct kvec *vec) { struct rpc_rqst *req = NULL; - u32 *p; - u32 xid; - u32 calldir; + __be32 *p; + __be32 xid; + __be32 calldir; int len; len = svc_recvfrom(rqstp, vec, 1, 8); -- cgit v1.2.3 From cc6c2127f2316c2b2ad1e8919b45cde5e03f65aa Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Mon, 14 Feb 2011 15:03:35 -0500 Subject: svcrpc: close connection if client sends short packet If the client sents a record too short to contain even the beginning of the rpc header, then just close the connection. The current code drops the record data and continues. I don't see the point. It's a hopeless situation and simpler just to cut off the connection completely. Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 1955e1a1e390..62ff7c5c09c2 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -955,6 +955,9 @@ static int svc_tcp_recv_record(struct svc_sock *svsk, struct svc_rqst *rqstp) } } + if (svsk->sk_reclen < 8) + goto err_delete; /* client is nuts. */ + /* Check whether enough data is available */ len = svc_recv_available(svsk); if (len < 0) @@ -1058,20 +1061,10 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) vec[0] = rqstp->rq_arg.head[0]; vlen = PAGE_SIZE; - /* - * We have enough data for the whole tcp record. Let's try and read the - * first 8 bytes to get the xid and the call direction. We can use this - * to figure out if this is a call or a reply to a callback. If - * sk_reclen is < 8 (xid and calldir), then this is a malformed packet. - * In that case, don't bother with the calldir and just read the data. - * It will be rejected in svc_process. - */ - if (len >= 8) { - len = svc_process_calldir(svsk, rqstp, &req, vec); - if (len < 0) - goto err_again; - vlen -= 8; - } + len = svc_process_calldir(svsk, rqstp, &req, vec); + if (len < 0) + goto err_again; + vlen -= 8; pnum = 1; while (vlen < svsk->sk_reclen - 8) { -- cgit v1.2.3 From 586c52cc61b5b84c70102208b78269ef5924bf49 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 18 May 2009 17:47:56 -0400 Subject: svcrpc: copy cb reply instead of pages It's much simpler just to copy the cb reply data than to play tricks with pages. Callback replies will typically be very small (at least until we implement cb_getattr, in which case files with very long ACLs could pose a problem), so there's no loss in efficiency. Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 122 +++++++++++++++++++++++---------------------------- 1 file changed, 56 insertions(+), 66 deletions(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 62ff7c5c09c2..40b502b11442 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -981,57 +981,58 @@ static int svc_tcp_recv_record(struct svc_sock *svsk, struct svc_rqst *rqstp) return -EAGAIN; } -static int svc_process_calldir(struct svc_sock *svsk, struct svc_rqst *rqstp, - struct rpc_rqst **reqpp, struct kvec *vec) +static int receive_cb_reply(struct svc_sock *svsk, struct svc_rqst *rqstp) { + struct rpc_xprt *bc_xprt = svsk->sk_xprt.xpt_bc_xprt; struct rpc_rqst *req = NULL; - __be32 *p; + struct kvec *src, *dst; + __be32 *p = (__be32 *)rqstp->rq_arg.head[0].iov_base; __be32 xid; __be32 calldir; - int len; - - len = svc_recvfrom(rqstp, vec, 1, 8); - if (len < 0) - goto error; - p = (u32 *)rqstp->rq_arg.head[0].iov_base; xid = *p++; calldir = *p; - if (calldir == 0) { - /* REQUEST is the most common case */ - vec[0] = rqstp->rq_arg.head[0]; - } else { - /* REPLY */ - struct rpc_xprt *bc_xprt = svsk->sk_xprt.xpt_bc_xprt; - - if (bc_xprt) - req = xprt_lookup_rqst(bc_xprt, xid); - - if (!req) { - printk(KERN_NOTICE - "%s: Got unrecognized reply: " - "calldir 0x%x xpt_bc_xprt %p xid %08x\n", - __func__, ntohl(calldir), - bc_xprt, xid); - vec[0] = rqstp->rq_arg.head[0]; - goto out; - } + if (bc_xprt) + req = xprt_lookup_rqst(bc_xprt, xid); - memcpy(&req->rq_private_buf, &req->rq_rcv_buf, - sizeof(struct xdr_buf)); - /* copy the xid and call direction */ - memcpy(req->rq_private_buf.head[0].iov_base, - rqstp->rq_arg.head[0].iov_base, 8); - vec[0] = req->rq_private_buf.head[0]; + if (!req) { + printk(KERN_NOTICE + "%s: Got unrecognized reply: " + "calldir 0x%x xpt_bc_xprt %p xid %08x\n", + __func__, ntohl(calldir), + bc_xprt, xid); + return -EAGAIN; } - out: - vec[0].iov_base += 8; - vec[0].iov_len -= 8; - len = svsk->sk_reclen - 8; - error: - *reqpp = req; - return len; + + memcpy(&req->rq_private_buf, &req->rq_rcv_buf, sizeof(struct xdr_buf)); + /* + * XXX!: cheating for now! Only copying HEAD. + * But we know this is good enough for now (in fact, for any + * callback reply in the forseeable future). + */ + dst = &req->rq_private_buf.head[0]; + src = &rqstp->rq_arg.head[0]; + if (dst->iov_len < src->iov_len) + return -EAGAIN; /* whatever; just giving up. */ + memcpy(dst->iov_base, src->iov_base, src->iov_len); + xprt_complete_rqst(req->rq_task, svsk->sk_reclen); + rqstp->rq_arg.len = 0; + return 0; +} + +static int copy_pages_to_kvecs(struct kvec *vec, struct page **pages, int len) +{ + int i = 0; + int t = 0; + + while (t < len) { + vec[i].iov_base = page_address(pages[i]); + vec[i].iov_len = PAGE_SIZE; + i++; + t += PAGE_SIZE; + } + return i; } /* @@ -1044,8 +1045,8 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) struct svc_serv *serv = svsk->sk_xprt.xpt_server; int len; struct kvec *vec; - struct rpc_rqst *req = NULL; - unsigned int vlen; + __be32 *p; + __be32 calldir; int pnum; dprintk("svc: tcp_recv %p data %d conn %d close %d\n", @@ -1058,35 +1059,17 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) goto error; vec = rqstp->rq_vec; - vec[0] = rqstp->rq_arg.head[0]; - vlen = PAGE_SIZE; - len = svc_process_calldir(svsk, rqstp, &req, vec); - if (len < 0) - goto err_again; - vlen -= 8; - - pnum = 1; - while (vlen < svsk->sk_reclen - 8) { - vec[pnum].iov_base = (req) ? - page_address(req->rq_private_buf.pages[pnum - 1]) : - page_address(rqstp->rq_pages[pnum]); - vec[pnum].iov_len = PAGE_SIZE; - pnum++; - vlen += PAGE_SIZE; - } + pnum = copy_pages_to_kvecs(&vec[0], &rqstp->rq_pages[0], + svsk->sk_reclen); + rqstp->rq_respages = &rqstp->rq_pages[pnum]; /* Now receive data */ - len = svc_recvfrom(rqstp, vec, pnum, svsk->sk_reclen - 8); + len = svc_recvfrom(rqstp, vec, pnum, svsk->sk_reclen); if (len < 0) goto err_again; - if (req) { - xprt_complete_rqst(req->rq_task, svsk->sk_reclen); - rqstp->rq_arg.len = 0; - goto out; - } dprintk("svc: TCP complete record (%d bytes)\n", svsk->sk_reclen); rqstp->rq_arg.len = svsk->sk_reclen; rqstp->rq_arg.page_base = 0; @@ -1099,7 +1082,14 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) rqstp->rq_xprt_ctxt = NULL; rqstp->rq_prot = IPPROTO_TCP; -out: + p = (__be32 *)rqstp->rq_arg.head[0].iov_base; + calldir = p[1]; + if (calldir) { + len = receive_cb_reply(svsk, rqstp); + if (len < 0) + goto err_again; + } + /* Reset TCP read info */ svsk->sk_reclen = 0; svsk->sk_tcplen = 0; -- cgit v1.2.3 From 31d68ef65c7d49def19c1bae4e01b87d66cf5a56 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 24 Feb 2011 11:25:33 -0800 Subject: SUNRPC: Don't wait for full record to receive tcp data Ensure that we immediately read and buffer data from the incoming TCP stream so that we grow the receive window quickly, and don't deadlock on large READ or WRITE requests. Also do some minor exit cleanup. Signed-off-by: Trond Myklebust Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svcsock.h | 1 + net/sunrpc/svcsock.c | 144 ++++++++++++++++++++++++++++++++--------- 2 files changed, 113 insertions(+), 32 deletions(-) diff --git a/include/linux/sunrpc/svcsock.h b/include/linux/sunrpc/svcsock.h index 04dba23c59f2..85c50b40759d 100644 --- a/include/linux/sunrpc/svcsock.h +++ b/include/linux/sunrpc/svcsock.h @@ -28,6 +28,7 @@ struct svc_sock { /* private TCP part */ u32 sk_reclen; /* length of record */ u32 sk_tcplen; /* current read length */ + struct page * sk_pages[RPCSVC_MAXPAGES]; /* received data */ }; /* diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 40b502b11442..a4fafcbc6ea0 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -387,6 +387,33 @@ static int svc_recvfrom(struct svc_rqst *rqstp, struct kvec *iov, int nr, return len; } +static int svc_partial_recvfrom(struct svc_rqst *rqstp, + struct kvec *iov, int nr, + int buflen, unsigned int base) +{ + size_t save_iovlen; + void __user *save_iovbase; + unsigned int i; + int ret; + + if (base == 0) + return svc_recvfrom(rqstp, iov, nr, buflen); + + for (i = 0; i < nr; i++) { + if (iov[i].iov_len > base) + break; + base -= iov[i].iov_len; + } + save_iovlen = iov[i].iov_len; + save_iovbase = iov[i].iov_base; + iov[i].iov_len -= base; + iov[i].iov_base += base; + ret = svc_recvfrom(rqstp, &iov[i], nr - i, buflen); + iov[i].iov_len = save_iovlen; + iov[i].iov_base = save_iovbase; + return ret; +} + /* * Set socket snd and rcv buffer lengths */ @@ -884,6 +911,56 @@ failed: return NULL; } +static unsigned int svc_tcp_restore_pages(struct svc_sock *svsk, struct svc_rqst *rqstp) +{ + unsigned int i, len, npages; + + if (svsk->sk_tcplen <= sizeof(rpc_fraghdr)) + return 0; + len = svsk->sk_tcplen - sizeof(rpc_fraghdr); + npages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; + for (i = 0; i < npages; i++) { + if (rqstp->rq_pages[i] != NULL) + put_page(rqstp->rq_pages[i]); + BUG_ON(svsk->sk_pages[i] == NULL); + rqstp->rq_pages[i] = svsk->sk_pages[i]; + svsk->sk_pages[i] = NULL; + } + rqstp->rq_arg.head[0].iov_base = page_address(rqstp->rq_pages[0]); + return len; +} + +static void svc_tcp_save_pages(struct svc_sock *svsk, struct svc_rqst *rqstp) +{ + unsigned int i, len, npages; + + if (svsk->sk_tcplen <= sizeof(rpc_fraghdr)) + return; + len = svsk->sk_tcplen - sizeof(rpc_fraghdr); + npages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; + for (i = 0; i < npages; i++) { + svsk->sk_pages[i] = rqstp->rq_pages[i]; + rqstp->rq_pages[i] = NULL; + } +} + +static void svc_tcp_clear_pages(struct svc_sock *svsk) +{ + unsigned int i, len, npages; + + if (svsk->sk_tcplen <= sizeof(rpc_fraghdr)) + goto out; + len = svsk->sk_tcplen - sizeof(rpc_fraghdr); + npages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT; + for (i = 0; i < npages; i++) { + BUG_ON(svsk->sk_pages[i] == NULL); + put_page(svsk->sk_pages[i]); + svsk->sk_pages[i] = NULL; + } +out: + svsk->sk_tcplen = 0; +} + /* * Receive data. * If we haven't gotten the record length yet, get the next four bytes. @@ -928,7 +1005,7 @@ static int svc_tcp_recv_record(struct svc_sock *svsk, struct svc_rqst *rqstp) if (len < want) { dprintk("svc: short recvfrom while reading record " "length (%d of %d)\n", len, want); - goto err_again; /* record header not complete */ + return -EAGAIN; } svsk->sk_reclen = ntohl(svsk->sk_reclen); @@ -958,26 +1035,14 @@ static int svc_tcp_recv_record(struct svc_sock *svsk, struct svc_rqst *rqstp) if (svsk->sk_reclen < 8) goto err_delete; /* client is nuts. */ - /* Check whether enough data is available */ - len = svc_recv_available(svsk); - if (len < 0) - goto error; - - if (len < svsk->sk_reclen) { - dprintk("svc: incomplete TCP record (%d of %d)\n", - len, svsk->sk_reclen); - goto err_again; /* record not complete */ - } len = svsk->sk_reclen; return len; - error: - if (len == -EAGAIN) - dprintk("RPC: TCP recv_record got EAGAIN\n"); +error: + dprintk("RPC: TCP recv_record got %d\n", len); return len; - err_delete: +err_delete: set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags); - err_again: return -EAGAIN; } @@ -1035,6 +1100,7 @@ static int copy_pages_to_kvecs(struct kvec *vec, struct page **pages, int len) return i; } + /* * Receive data from a TCP socket. */ @@ -1045,6 +1111,7 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) struct svc_serv *serv = svsk->sk_xprt.xpt_server; int len; struct kvec *vec; + unsigned int want, base; __be32 *p; __be32 calldir; int pnum; @@ -1058,6 +1125,9 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) if (len < 0) goto error; + base = svc_tcp_restore_pages(svsk, rqstp); + want = svsk->sk_reclen - base; + vec = rqstp->rq_vec; pnum = copy_pages_to_kvecs(&vec[0], &rqstp->rq_pages[0], @@ -1066,11 +1136,18 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) rqstp->rq_respages = &rqstp->rq_pages[pnum]; /* Now receive data */ - len = svc_recvfrom(rqstp, vec, pnum, svsk->sk_reclen); - if (len < 0) - goto err_again; + len = svc_partial_recvfrom(rqstp, vec, pnum, want, base); + if (len >= 0) + svsk->sk_tcplen += len; + if (len != want) { + if (len < 0 && len != -EAGAIN) + goto err_other; + svc_tcp_save_pages(svsk, rqstp); + dprintk("svc: incomplete TCP record (%d of %d)\n", + svsk->sk_tcplen, svsk->sk_reclen); + goto err_noclose; + } - dprintk("svc: TCP complete record (%d bytes)\n", svsk->sk_reclen); rqstp->rq_arg.len = svsk->sk_reclen; rqstp->rq_arg.page_base = 0; if (rqstp->rq_arg.len <= rqstp->rq_arg.head[0].iov_len) { @@ -1087,7 +1164,7 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) if (calldir) { len = receive_cb_reply(svsk, rqstp); if (len < 0) - goto err_again; + goto error; } /* Reset TCP read info */ @@ -1102,20 +1179,20 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) if (serv->sv_stats) serv->sv_stats->nettcpcnt++; + dprintk("svc: TCP complete record (%d bytes)\n", rqstp->rq_arg.len); return rqstp->rq_arg.len; -err_again: - if (len == -EAGAIN) { - dprintk("RPC: TCP recvfrom got EAGAIN\n"); - return len; - } error: - if (len != -EAGAIN) { - printk(KERN_NOTICE "%s: recvfrom returned errno %d\n", - svsk->sk_xprt.xpt_server->sv_name, -len); - set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags); - } + if (len != -EAGAIN) + goto err_other; + dprintk("RPC: TCP recvfrom got EAGAIN\n"); return -EAGAIN; +err_other: + printk(KERN_NOTICE "%s: recvfrom returned errno %d\n", + svsk->sk_xprt.xpt_server->sv_name, -len); + set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags); +err_noclose: + return -EAGAIN; /* record not complete */ } /* @@ -1286,6 +1363,7 @@ static void svc_tcp_init(struct svc_sock *svsk, struct svc_serv *serv) svsk->sk_reclen = 0; svsk->sk_tcplen = 0; + memset(&svsk->sk_pages[0], 0, sizeof(svsk->sk_pages)); tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF; @@ -1544,8 +1622,10 @@ static void svc_tcp_sock_detach(struct svc_xprt *xprt) svc_sock_detach(xprt); - if (!test_bit(XPT_LISTENER, &xprt->xpt_flags)) + if (!test_bit(XPT_LISTENER, &xprt->xpt_flags)) { + svc_tcp_clear_pages(svsk); kernel_sock_shutdown(svsk->sk_sock, SHUT_RDWR); + } } /* -- cgit v1.2.3 From 9660439861aa8dbd5e2b8087f33e20760c2c9afc Mon Sep 17 00:00:00 2001 From: Olga Kornievskaia Date: Tue, 21 Oct 2008 14:13:47 -0400 Subject: svcrpc: take advantage of tcp autotuning Allow the NFSv4 server to make use of TCP autotuning behaviour, which was previously disabled by setting the sk_userlocks variable. Set the receive buffers to be big enough to receive the whole RPC request, and set this for the listening socket, not the accept socket. Remove the code that readjusts the receive/send buffer sizes for the accepted socket. Previously this code was used to influence the TCP window management behaviour, which is no longer needed when autotuning is enabled. This can improve IO bandwidth on networks with high bandwidth-delay products, where a large tcp window is required. It also simplifies performance tuning, since getting adequate tcp buffers previously required increasing the number of nfsd threads. Signed-off-by: Olga Kornievskaia Cc: Jim Rees Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 35 +++++++---------------------------- 1 file changed, 7 insertions(+), 28 deletions(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index a4fafcbc6ea0..213dea8b283c 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -436,7 +436,6 @@ static void svc_sock_setbufsize(struct socket *sock, unsigned int snd, lock_sock(sock->sk); sock->sk->sk_sndbuf = snd * 2; sock->sk->sk_rcvbuf = rcv * 2; - sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK; sock->sk->sk_write_space(sock->sk); release_sock(sock->sk); #endif @@ -973,23 +972,6 @@ static int svc_tcp_recv_record(struct svc_sock *svsk, struct svc_rqst *rqstp) unsigned int want; int len; - if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags)) - /* sndbuf needs to have room for one request - * per thread, otherwise we can stall even when the - * network isn't a bottleneck. - * - * We count all threads rather than threads in a - * particular pool, which provides an upper bound - * on the number of threads which will access the socket. - * - * rcvbuf just needs to be able to hold a few requests. - * Normally they will be removed from the queue - * as soon a a complete request arrives. - */ - svc_sock_setbufsize(svsk->sk_sock, - (serv->sv_nrthreads+3) * serv->sv_max_mesg, - 3 * serv->sv_max_mesg); - clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); if (svsk->sk_tcplen < sizeof(rpc_fraghdr)) { @@ -1367,15 +1349,6 @@ static void svc_tcp_init(struct svc_sock *svsk, struct svc_serv *serv) tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF; - /* initialise setting must have enough space to - * receive and respond to one request. - * svc_tcp_recvfrom will re-adjust if necessary - */ - svc_sock_setbufsize(svsk->sk_sock, - 3 * svsk->sk_xprt.xpt_server->sv_max_mesg, - 3 * svsk->sk_xprt.xpt_server->sv_max_mesg); - - set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags); set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); if (sk->sk_state != TCP_ESTABLISHED) set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags); @@ -1439,8 +1412,14 @@ static struct svc_sock *svc_setup_socket(struct svc_serv *serv, /* Initialize the socket */ if (sock->type == SOCK_DGRAM) svc_udp_init(svsk, serv); - else + else { + /* initialise setting must have enough space to + * receive and respond to one request. + */ + svc_sock_setbufsize(svsk->sk_sock, 4 * serv->sv_max_mesg, + 4 * serv->sv_max_mesg); svc_tcp_init(svsk, serv); + } dprintk("svc: svc_setup_socket created %p (inet %p)\n", svsk, svsk->sk_sk); -- cgit v1.2.3 From 8985ef0b8af895c3b85a8c1b7108e0169fcbd20b Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Sat, 9 Apr 2011 10:03:10 -0400 Subject: svcrpc: complete svsk processing on cb receive failure Currently when there's some failure to receive a callback (because we couldn't find a matching xid, for example), we exit svc_recv with sk_tcplen still set but without any pages saved with the socket. This will cause a crash later in svc_tcp_restore_pages. Instead, make sure we reset that tcp information whether the callback received failed or succeeded. Signed-off-by: J. Bruce Fields --- net/sunrpc/svcsock.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 213dea8b283c..af04f779ce9f 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -1143,11 +1143,8 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) p = (__be32 *)rqstp->rq_arg.head[0].iov_base; calldir = p[1]; - if (calldir) { + if (calldir) len = receive_cb_reply(svsk, rqstp); - if (len < 0) - goto error; - } /* Reset TCP read info */ svsk->sk_reclen = 0; @@ -1156,6 +1153,8 @@ static int svc_tcp_recvfrom(struct svc_rqst *rqstp) if (svc_recv_available(svsk) > sizeof(rpc_fraghdr)) set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); + if (len < 0) + goto error; svc_xprt_copy_addrs(rqstp, &svsk->sk_xprt); if (serv->sv_stats) -- cgit v1.2.3 From aea93397db4b39c9d15443a0e7cc9a380ba990c6 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Sun, 10 Apr 2011 10:35:12 -0400 Subject: nfsd: distinguish functions of NFSD_MAY_* flags Most of the NFSD_MAY_* flags actually request permissions, but over the years we've accreted a few that modify the behavior of the permission or open code in other ways. Distinguish the two cases a little more. In particular, allow the shortcut at the start of nfsd_permission to ignore the non-permission-requesting bits. Signed-off-by: J. Bruce Fields --- fs/nfsd/vfs.c | 2 +- fs/nfsd/vfs.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 2e1cebde90df..a76ef7e0b3d0 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -2027,7 +2027,7 @@ nfsd_permission(struct svc_rqst *rqstp, struct svc_export *exp, struct inode *inode = dentry->d_inode; int err; - if (acc == NFSD_MAY_NOP) + if ((acc & NFSD_MAY_MASK) == NFSD_MAY_NOP) return 0; #if 0 dprintk("nfsd: permission 0x%x%s%s%s%s%s%s%s mode 0%o%s%s%s\n", diff --git a/fs/nfsd/vfs.h b/fs/nfsd/vfs.h index 9a370a5e36b7..1036913e6e86 100644 --- a/fs/nfsd/vfs.h +++ b/fs/nfsd/vfs.h @@ -17,6 +17,9 @@ #define NFSD_MAY_SATTR 8 #define NFSD_MAY_TRUNC 16 #define NFSD_MAY_LOCK 32 +#define NFSD_MAY_MASK 63 + +/* extra hints to permission and open routines: */ #define NFSD_MAY_OWNER_OVERRIDE 64 #define NFSD_MAY_LOCAL_ACCESS 128 /* IRIX doing local access check on device special file*/ #define NFSD_MAY_BYPASS_GSS_ON_ROOT 256 -- cgit v1.2.3 From 204f4ce75434c3453907813f8a819d4cf2a5728f Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 8 Apr 2011 16:32:54 -0400 Subject: nfsd4: allow fh_verify caller to skip pseudoflavor checks Signed-off-by: J. Bruce Fields --- fs/nfsd/nfsfh.c | 2 +- fs/nfsd/vfs.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfsd/nfsfh.c b/fs/nfsd/nfsfh.c index 55c8e63af0be..90c6aa6d5e0f 100644 --- a/fs/nfsd/nfsfh.c +++ b/fs/nfsd/nfsfh.c @@ -344,7 +344,7 @@ fh_verify(struct svc_rqst *rqstp, struct svc_fh *fhp, int type, int access) * which clients virtually always use auth_sys for, * even while using RPCSEC_GSS for NFS. */ - if (access & NFSD_MAY_LOCK) + if (access & NFSD_MAY_LOCK || access & NFSD_MAY_BYPASS_GSS) goto skip_pseudoflavor_check; /* * Clients may expect to be able to use auth_sys during mount, diff --git a/fs/nfsd/vfs.h b/fs/nfsd/vfs.h index 1036913e6e86..4d2509f766d4 100644 --- a/fs/nfsd/vfs.h +++ b/fs/nfsd/vfs.h @@ -24,6 +24,7 @@ #define NFSD_MAY_LOCAL_ACCESS 128 /* IRIX doing local access check on device special file*/ #define NFSD_MAY_BYPASS_GSS_ON_ROOT 256 #define NFSD_MAY_NOT_BREAK_LEASE 512 +#define NFSD_MAY_BYPASS_GSS 1024 #define NFSD_MAY_CREATE (NFSD_MAY_EXEC|NFSD_MAY_WRITE) #define NFSD_MAY_REMOVE (NFSD_MAY_EXEC|NFSD_MAY_WRITE|NFSD_MAY_TRUNC) -- cgit v1.2.3 From 22b03214962ec2a9748abc9987fc2e66dec4626d Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Sat, 9 Apr 2011 11:23:24 -0400 Subject: nfsd4: introduce OPDESC helper Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4proc.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 5fcb1396a7e3..126b8f75b576 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -1031,6 +1031,11 @@ static __be32 nfs41_check_op_ordering(struct nfsd4_compoundargs *args) return nfs_ok; } +static inline struct nfsd4_operation *OPDESC(struct nfsd4_op *op) +{ + return &nfsd4_ops[op->opnum]; +} + /* * COMPOUND call. */ @@ -1108,7 +1113,7 @@ nfsd4_proc_compound(struct svc_rqst *rqstp, goto encode_op; } - opdesc = &nfsd4_ops[op->opnum]; + opdesc = OPDESC(op); if (!cstate->current_fh.fh_dentry) { if (!(opdesc->op_flags & ALLOWED_WITHOUT_FH)) { -- cgit v1.2.3 From 29a78a3ed7fc9c4ee49962751eb321b038c190a2 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Sat, 9 Apr 2011 11:28:53 -0400 Subject: nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller The secinfo caller actually won't want this. Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4proc.c | 3 +++ fs/nfsd/vfs.c | 9 +++------ 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 126b8f75b576..8059adae013b 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -762,6 +762,9 @@ nfsd4_secinfo(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, __be32 err; fh_init(&resfh, NFS4_FHSIZE); + err = fh_verify(rqstp, &cstate->current_fh, S_IFDIR, NFSD_MAY_EXEC); + if (err) + return err; err = nfsd_lookup_dentry(rqstp, &cstate->current_fh, secinfo->si_name, secinfo->si_namelen, &exp, &dentry); diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index a76ef7e0b3d0..e53313972c30 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -181,16 +181,10 @@ nfsd_lookup_dentry(struct svc_rqst *rqstp, struct svc_fh *fhp, struct svc_export *exp; struct dentry *dparent; struct dentry *dentry; - __be32 err; int host_err; dprintk("nfsd: nfsd_lookup(fh %s, %.*s)\n", SVCFH_fmt(fhp), len,name); - /* Obtain dentry and export. */ - err = fh_verify(rqstp, fhp, S_IFDIR, NFSD_MAY_EXEC); - if (err) - return err; - dparent = fhp->fh_dentry; exp = fhp->fh_export; exp_get(exp); @@ -254,6 +248,9 @@ nfsd_lookup(struct svc_rqst *rqstp, struct svc_fh *fhp, const char *name, struct dentry *dentry; __be32 err; + err = fh_verify(rqstp, fhp, S_IFDIR, NFSD_MAY_EXEC); + if (err) + return err; err = nfsd_lookup_dentry(rqstp, fhp, name, len, &exp, &dentry); if (err) return err; -- cgit v1.2.3 From b14a9ccc1ddddfbc76b7cae06d02db4adf0ae1db Mon Sep 17 00:00:00 2001 From: MyungJoo Ham Date: Tue, 29 Mar 2011 10:10:16 +0900 Subject: power_supply: Add driver for MAX8903 charger MAX8903 is an integrated battery charger and selector with two power inputs (USB and AC adapter). This driver enables the charger, handles interrupts, and provides power-supply-class information to userland. Tested on Exynos4 NURI / S5PC210 SLP7 boards. Signed-off-by: MyungJoo Ham Signed-off-by: Kyungmin Park Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 8 + drivers/power/Makefile | 1 + drivers/power/max8903_charger.c | 391 ++++++++++++++++++++++++++++++++++ include/linux/power/max8903_charger.h | 57 +++++ 4 files changed, 457 insertions(+) create mode 100644 drivers/power/max8903_charger.c create mode 100644 include/linux/power/max8903_charger.h diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 52a462fc6b84..1f50ebcc6399 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -203,6 +203,14 @@ config CHARGER_ISP1704 Say Y to enable support for USB Charger Detection with ISP1707/ISP1704 USB transceivers. +config CHARGER_MAX8903 + tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" + help + Say Y to enable support for the MAX8903 DC-DC charger and sysfs. + The driver supports controlling charger-enable and current-limit + pins based on the status of charger connections with interrupt + handlers. + config CHARGER_TWL4030 tristate "OMAP TWL4030 BCI charger driver" depends on TWL4030_CORE diff --git a/drivers/power/Makefile b/drivers/power/Makefile index 8385bfae8728..8fcd93ff2353 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -32,5 +32,6 @@ obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o +obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o diff --git a/drivers/power/max8903_charger.c b/drivers/power/max8903_charger.c new file mode 100644 index 000000000000..33ff0e37809e --- /dev/null +++ b/drivers/power/max8903_charger.c @@ -0,0 +1,391 @@ +/* + * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver + * + * Copyright (C) 2011 Samsung Electronics + * MyungJoo Ham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include +#include + +struct max8903_data { + struct max8903_pdata *pdata; + struct device *dev; + struct power_supply psy; + bool fault; + bool usb_in; + bool ta_in; +}; + +static enum power_supply_property max8903_charger_props[] = { + POWER_SUPPLY_PROP_STATUS, /* Charger status output */ + POWER_SUPPLY_PROP_ONLINE, /* External power source */ + POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */ +}; + +static int max8903_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max8903_data *data = container_of(psy, + struct max8903_data, psy); + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + if (data->pdata->chg) { + if (gpio_get_value(data->pdata->chg) == 0) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (data->usb_in || data->ta_in) + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + } + break; + case POWER_SUPPLY_PROP_ONLINE: + val->intval = 0; + if (data->usb_in || data->ta_in) + val->intval = 1; + break; + case POWER_SUPPLY_PROP_HEALTH: + val->intval = POWER_SUPPLY_HEALTH_GOOD; + if (data->fault) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + break; + default: + return -EINVAL; + } + return 0; +} + +static irqreturn_t max8903_dcin(int irq, void *_data) +{ + struct max8903_data *data = _data; + struct max8903_pdata *pdata = data->pdata; + bool ta_in; + enum power_supply_type old_type; + + ta_in = gpio_get_value(pdata->dok) ? false : true; + + if (ta_in == data->ta_in) + return IRQ_HANDLED; + + data->ta_in = ta_in; + + /* Set Current-Limit-Mode 1:DC 0:USB */ + if (pdata->dcm) + gpio_set_value(pdata->dcm, ta_in ? 1 : 0); + + /* Charger Enable / Disable (cen is negated) */ + if (pdata->cen) + gpio_set_value(pdata->cen, ta_in ? 0 : + (data->usb_in ? 0 : 1)); + + dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ? + "Connected" : "Disconnected"); + + old_type = data->psy.type; + + if (data->ta_in) + data->psy.type = POWER_SUPPLY_TYPE_MAINS; + else if (data->usb_in) + data->psy.type = POWER_SUPPLY_TYPE_USB; + else + data->psy.type = POWER_SUPPLY_TYPE_BATTERY; + + if (old_type != data->psy.type) + power_supply_changed(&data->psy); + + return IRQ_HANDLED; +} + +static irqreturn_t max8903_usbin(int irq, void *_data) +{ + struct max8903_data *data = _data; + struct max8903_pdata *pdata = data->pdata; + bool usb_in; + enum power_supply_type old_type; + + usb_in = gpio_get_value(pdata->uok) ? false : true; + + if (usb_in == data->usb_in) + return IRQ_HANDLED; + + data->usb_in = usb_in; + + /* Do not touch Current-Limit-Mode */ + + /* Charger Enable / Disable (cen is negated) */ + if (pdata->cen) + gpio_set_value(pdata->cen, usb_in ? 0 : + (data->ta_in ? 0 : 1)); + + dev_dbg(data->dev, "USB Charger %s.\n", usb_in ? + "Connected" : "Disconnected"); + + old_type = data->psy.type; + + if (data->ta_in) + data->psy.type = POWER_SUPPLY_TYPE_MAINS; + else if (data->usb_in) + data->psy.type = POWER_SUPPLY_TYPE_USB; + else + data->psy.type = POWER_SUPPLY_TYPE_BATTERY; + + if (old_type != data->psy.type) + power_supply_changed(&data->psy); + + return IRQ_HANDLED; +} + +static irqreturn_t max8903_fault(int irq, void *_data) +{ + struct max8903_data *data = _data; + struct max8903_pdata *pdata = data->pdata; + bool fault; + + fault = gpio_get_value(pdata->flt) ? false : true; + + if (fault == data->fault) + return IRQ_HANDLED; + + data->fault = fault; + + if (fault) + dev_err(data->dev, "Charger suffers a fault and stops.\n"); + else + dev_err(data->dev, "Charger recovered from a fault.\n"); + + return IRQ_HANDLED; +} + +static __devinit int max8903_probe(struct platform_device *pdev) +{ + struct max8903_data *data; + struct device *dev = &pdev->dev; + struct max8903_pdata *pdata = pdev->dev.platform_data; + int ret = 0; + int gpio; + int ta_in = 0; + int usb_in = 0; + + data = kzalloc(sizeof(struct max8903_data), GFP_KERNEL); + if (data == NULL) { + dev_err(dev, "Cannot allocate memory.\n"); + return -ENOMEM; + } + data->pdata = pdata; + data->dev = dev; + platform_set_drvdata(pdev, data); + + if (pdata->dc_valid == false && pdata->usb_valid == false) { + dev_err(dev, "No valid power sources.\n"); + ret = -EINVAL; + goto err; + } + + if (pdata->dc_valid) { + if (pdata->dok && gpio_is_valid(pdata->dok) && + pdata->dcm && gpio_is_valid(pdata->dcm)) { + gpio = pdata->dok; /* PULL_UPed Interrupt */ + ta_in = gpio_get_value(gpio) ? 0 : 1; + + gpio = pdata->dcm; /* Output */ + gpio_set_value(gpio, ta_in); + } else { + dev_err(dev, "When DC is wired, DOK and DCM should" + " be wired as well.\n"); + ret = -EINVAL; + goto err; + } + } else { + if (pdata->dcm) { + if (gpio_is_valid(pdata->dcm)) + gpio_set_value(pdata->dcm, 0); + else { + dev_err(dev, "Invalid pin: dcm.\n"); + ret = -EINVAL; + goto err; + } + } + } + + if (pdata->usb_valid) { + if (pdata->uok && gpio_is_valid(pdata->uok)) { + gpio = pdata->uok; + usb_in = gpio_get_value(gpio) ? 0 : 1; + } else { + dev_err(dev, "When USB is wired, UOK should be wired." + "as well.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->cen) { + if (gpio_is_valid(pdata->cen)) { + gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1); + } else { + dev_err(dev, "Invalid pin: cen.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->chg) { + if (!gpio_is_valid(pdata->chg)) { + dev_err(dev, "Invalid pin: chg.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->flt) { + if (!gpio_is_valid(pdata->flt)) { + dev_err(dev, "Invalid pin: flt.\n"); + ret = -EINVAL; + goto err; + } + } + + if (pdata->usus) { + if (!gpio_is_valid(pdata->usus)) { + dev_err(dev, "Invalid pin: usus.\n"); + ret = -EINVAL; + goto err; + } + } + + data->fault = false; + data->ta_in = ta_in; + data->usb_in = usb_in; + + data->psy.name = "max8903_charger"; + data->psy.type = (ta_in) ? POWER_SUPPLY_TYPE_MAINS : + ((usb_in) ? POWER_SUPPLY_TYPE_USB : + POWER_SUPPLY_TYPE_BATTERY); + data->psy.get_property = max8903_get_property; + data->psy.properties = max8903_charger_props; + data->psy.num_properties = ARRAY_SIZE(max8903_charger_props); + + ret = power_supply_register(dev, &data->psy); + if (ret) { + dev_err(dev, "failed: power supply register.\n"); + goto err; + } + + if (pdata->dc_valid) { + ret = request_threaded_irq(gpio_to_irq(pdata->dok), + NULL, max8903_dcin, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "MAX8903 DC IN", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for DC (%d)\n", + gpio_to_irq(pdata->dok), ret); + goto err_psy; + } + } + + if (pdata->usb_valid) { + ret = request_threaded_irq(gpio_to_irq(pdata->uok), + NULL, max8903_usbin, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "MAX8903 USB IN", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for USB (%d)\n", + gpio_to_irq(pdata->uok), ret); + goto err_dc_irq; + } + } + + if (pdata->flt) { + ret = request_threaded_irq(gpio_to_irq(pdata->flt), + NULL, max8903_fault, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "MAX8903 Fault", data); + if (ret) { + dev_err(dev, "Cannot request irq %d for Fault (%d)\n", + gpio_to_irq(pdata->flt), ret); + goto err_usb_irq; + } + } + + return 0; + +err_usb_irq: + if (pdata->usb_valid) + free_irq(gpio_to_irq(pdata->uok), data); +err_dc_irq: + if (pdata->dc_valid) + free_irq(gpio_to_irq(pdata->dok), data); +err_psy: + power_supply_unregister(&data->psy); +err: + kfree(data); + return ret; +} + +static __devexit int max8903_remove(struct platform_device *pdev) +{ + struct max8903_data *data = platform_get_drvdata(pdev); + + if (data) { + struct max8903_pdata *pdata = data->pdata; + + if (pdata->flt) + free_irq(gpio_to_irq(pdata->flt), data); + if (pdata->usb_valid) + free_irq(gpio_to_irq(pdata->uok), data); + if (pdata->dc_valid) + free_irq(gpio_to_irq(pdata->dok), data); + power_supply_unregister(&data->psy); + kfree(data); + } + + return 0; +} + +static struct platform_driver max8903_driver = { + .probe = max8903_probe, + .remove = __devexit_p(max8903_remove), + .driver = { + .name = "max8903-charger", + .owner = THIS_MODULE, + }, +}; + +static int __init max8903_init(void) +{ + return platform_driver_register(&max8903_driver); +} +module_init(max8903_init); + +static void __exit max8903_exit(void) +{ + platform_driver_unregister(&max8903_driver); +} +module_exit(max8903_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MAX8903 Charger Driver"); +MODULE_AUTHOR("MyungJoo Ham "); +MODULE_ALIAS("max8903-charger"); diff --git a/include/linux/power/max8903_charger.h b/include/linux/power/max8903_charger.h new file mode 100644 index 000000000000..24f51db8a83f --- /dev/null +++ b/include/linux/power/max8903_charger.h @@ -0,0 +1,57 @@ +/* + * max8903_charger.h - Maxim 8903 USB/Adapter Charger Driver + * + * Copyright (C) 2011 Samsung Electronics + * MyungJoo Ham + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __MAX8903_CHARGER_H__ +#define __MAX8903_CHARGER_H__ + +struct max8903_pdata { + /* + * GPIOs + * cen, chg, flt, and usus are optional. + * dok, dcm, and uok are not optional depending on the status of + * dc_valid and usb_valid. + */ + int cen; /* Charger Enable input */ + int dok; /* DC(Adapter) Power OK output */ + int uok; /* USB Power OK output */ + int chg; /* Charger status output */ + int flt; /* Fault output */ + int dcm; /* Current-Limit Mode input (1: DC, 2: USB) */ + int usus; /* USB Suspend Input (1: suspended) */ + + /* + * DC(Adapter/TA) is wired + * When dc_valid is true, + * dok and dcm should be valid. + * + * At least one of dc_valid or usb_valid should be true. + */ + bool dc_valid; + /* + * USB is wired + * When usb_valid is true, + * uok should be valid. + */ + bool usb_valid; +}; + +#endif /* __MAX8903_CHARGER_H__ */ -- cgit v1.2.3 From f10513de2a6036742b55e23278f0322f2e5c3772 Mon Sep 17 00:00:00 2001 From: Benson Leung Date: Wed, 6 Apr 2011 16:55:20 -0700 Subject: gpio-charger: Add gpio_charger_resume Gpio charger should notify if the gpio state had changed during suspend. This will send a CHANGED event each time the system resumes, ensuring a plug/unplug of the charger is not missed. Signed-off-by: Benson Leung Acked-By: Lars-Peter Clausen Signed-off-by: Anton Vorontsov --- drivers/power/gpio-charger.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/power/gpio-charger.c b/drivers/power/gpio-charger.c index 25b88ac1d44c..718f2c537827 100644 --- a/drivers/power/gpio-charger.c +++ b/drivers/power/gpio-charger.c @@ -161,12 +161,27 @@ static int __devexit gpio_charger_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int gpio_charger_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_charger *gpio_charger = platform_get_drvdata(pdev); + + power_supply_changed(&gpio_charger->charger); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(gpio_charger_pm_ops, NULL, gpio_charger_resume); + static struct platform_driver gpio_charger_driver = { .probe = gpio_charger_probe, .remove = __devexit_p(gpio_charger_remove), .driver = { .name = "gpio-charger", .owner = THIS_MODULE, + .pm = &gpio_charger_pm_ops, }, }; -- cgit v1.2.3 From 2785cefc98051646bd1d36a627822a3f43736697 Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Tue, 29 Mar 2011 16:27:59 +0300 Subject: isp1704_charger: Allow board specific powering routine The ISP1704/1707 chip can be put to full power down state by asserting the CHIP_SEL line. This patch enables platform or board specific hooks to put the device into power down mode in case not needed. This patch is a preparation for enabling this powering routine in n900 (rx-51) devices. Thanks to Heikki Krogerus for helping out with the patch. Signed-off-by: Kalle Jokiniemi Acked-By: Heikki Krogerus Signed-off-by: Anton Vorontsov --- drivers/power/isp1704_charger.c | 22 ++++++++++++++++++++++ include/linux/power/isp1704_charger.h | 29 +++++++++++++++++++++++++++++ 2 files changed, 51 insertions(+) create mode 100644 include/linux/power/isp1704_charger.h diff --git a/drivers/power/isp1704_charger.c b/drivers/power/isp1704_charger.c index 2ad9b14a5ce3..f6d72b402a8e 100644 --- a/drivers/power/isp1704_charger.c +++ b/drivers/power/isp1704_charger.c @@ -33,6 +33,7 @@ #include #include #include +#include /* Vendor specific Power Control register */ #define ISP1704_PWR_CTRL 0x3d @@ -70,6 +71,18 @@ struct isp1704_charger { unsigned max_power; }; +/* + * Disable/enable the power from the isp1704 if a function for it + * has been provided with platform data. + */ +static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on) +{ + struct isp1704_charger_data *board = isp->dev->platform_data; + + if (board->set_power) + board->set_power(on); +} + /* * Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB * chargers). @@ -222,6 +235,9 @@ static void isp1704_charger_work(struct work_struct *data) mutex_lock(&lock); + if (event != USB_EVENT_NONE) + isp1704_charger_set_power(isp, 1); + switch (event) { case USB_EVENT_VBUS: isp->online = true; @@ -269,6 +285,8 @@ static void isp1704_charger_work(struct work_struct *data) */ if (isp->otg->gadget) usb_gadget_disconnect(isp->otg->gadget); + + isp1704_charger_set_power(isp, 0); break; case USB_EVENT_ENUMERATED: if (isp->present) @@ -394,6 +412,8 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev) isp->dev = &pdev->dev; platform_set_drvdata(pdev, isp); + isp1704_charger_set_power(isp, 1); + ret = isp1704_test_ulpi(isp); if (ret < 0) goto fail1; @@ -434,6 +454,7 @@ static int __devinit isp1704_charger_probe(struct platform_device *pdev) /* Detect charger if VBUS is valid (the cable was already plugged). */ ret = otg_io_read(isp->otg, ULPI_USB_INT_STS); + isp1704_charger_set_power(isp, 0); if ((ret & ULPI_INT_VBUS_VALID) && !isp->otg->default_a) { isp->event = USB_EVENT_VBUS; schedule_work(&isp->work); @@ -459,6 +480,7 @@ static int __devexit isp1704_charger_remove(struct platform_device *pdev) otg_unregister_notifier(isp->otg, &isp->nb); power_supply_unregister(&isp->psy); otg_put_transceiver(isp->otg); + isp1704_charger_set_power(isp, 0); kfree(isp); return 0; diff --git a/include/linux/power/isp1704_charger.h b/include/linux/power/isp1704_charger.h new file mode 100644 index 000000000000..68096a6aa2d7 --- /dev/null +++ b/include/linux/power/isp1704_charger.h @@ -0,0 +1,29 @@ +/* + * ISP1704 USB Charger Detection driver + * + * Copyright (C) 2011 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + + +#ifndef __ISP1704_CHARGER_H +#define __ISP1704_CHARGER_H + +struct isp1704_charger_data { + void (*set_power)(bool on); +}; + +#endif -- cgit v1.2.3 From 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Tue, 29 Mar 2011 16:28:00 +0300 Subject: ARM: RX-51: Enable isp1704 power on/off The isp1704 usb tranceiver is used for charging and can be disabled when not in use. Provide the powering routine to the driver via platform data. Also changed the indent of ".name" variable in rx51_charger_device definition to use tabs same way as the new ".dev" variable indent. Put this in the same patch since the indent fix is only needed when there are multiple members in the struct definition. Loosely based on earlier patches from Heikki Krogerus in Nokia N900 maemo kernel. Signed-off-by: Kalle Jokiniemi Acked-By: Heikki Krogerus Acked-by: Tony Lindgren Signed-off-by: Anton Vorontsov --- arch/arm/mach-omap2/board-rx51-peripherals.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index bbcb6775a6a3..fad98abd4844 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -52,6 +53,8 @@ #define RX51_FMTX_RESET_GPIO 163 #define RX51_FMTX_IRQ 53 +#define RX51_USB_TRANSCEIVER_RST_GPIO 67 + /* list all spi devices here */ enum { RX51_SPI_WL1251, @@ -110,10 +113,30 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { }, }; +static void rx51_charger_set_power(bool on) +{ + gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); +} + +static struct isp1704_charger_data rx51_charger_data = { + .set_power = rx51_charger_set_power, +}; + static struct platform_device rx51_charger_device = { - .name = "isp1704_charger", + .name = "isp1704_charger", + .dev = { + .platform_data = &rx51_charger_data, + }, }; +static void __init rx51_charger_init(void) +{ + WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, + GPIOF_OUT_INIT_LOW, "isp1704_reset")); + + platform_device_register(&rx51_charger_device); +} + #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #define RX51_GPIO_CAMERA_LENS_COVER 110 @@ -981,6 +1004,6 @@ void __init rx51_peripherals_init(void) if (partition) omap2_hsmmc_init(mmc); - platform_device_register(&rx51_charger_device); + rx51_charger_init(); } -- cgit v1.2.3 From 6f9efe76cb213e9b0dd89e465efaf9725f4bf492 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 22 Apr 2011 03:08:22 +0400 Subject: max8903_charger: Add GENERIC_HARDIRQS as a dependency (fixes S390 build) S390 is special as it doesn't have IRQ lines, so these errors pop up: drivers/built-in.o: In function 'max8903_remove': drivers/power/max8903_charger.c:355: undefined reference to 'free_irq' drivers/power/max8903_charger.c:357: undefined reference to 'free_irq' drivers/power/max8903_charger.c:359: undefined reference to 'free_irq' This commit fixes the issue by making the driver depend on GENERIC_HARDIRQS feature. Reported-by: Stephen Rothwell Signed-off-by: Anton Vorontsov --- drivers/power/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 1f50ebcc6399..cc019c9812c2 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -205,6 +205,7 @@ config CHARGER_ISP1704 config CHARGER_MAX8903 tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power" + depends on GENERIC_HARDIRQS help Say Y to enable support for the MAX8903 DC-DC charger and sysfs. The driver supports controlling charger-enable and current-limit -- cgit v1.2.3 From 92c423118105e1c8c1587367a26eeb3277bda89a Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 2 Mar 2011 16:50:21 +0800 Subject: Btrfs: Remove unused btrfs_block_group_free_space() We've already recorded the value in block_group->frees_space. Signed-off-by: Li Zefan --- fs/btrfs/free-space-cache.c | 15 --------------- fs/btrfs/free-space-cache.h | 1 - 2 files changed, 16 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 11d2e9cea09e..3af64c6ea9df 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1685,21 +1685,6 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group, "\n", count); } -u64 btrfs_block_group_free_space(struct btrfs_block_group_cache *block_group) -{ - struct btrfs_free_space *info; - struct rb_node *n; - u64 ret = 0; - - for (n = rb_first(&block_group->free_space_offset); n; - n = rb_next(n)) { - info = rb_entry(n, struct btrfs_free_space, offset_index); - ret += info->bytes; - } - - return ret; -} - /* * for a given cluster, put all of its extents back into the free * space cache. If the block group passed doesn't match the block group diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h index 65c3b935289f..12b2b5165f8a 100644 --- a/fs/btrfs/free-space-cache.h +++ b/fs/btrfs/free-space-cache.h @@ -55,7 +55,6 @@ u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group, u64 offset, u64 bytes, u64 empty_size); void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group, u64 bytes); -u64 btrfs_block_group_free_space(struct btrfs_block_group_cache *block_group); int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_block_group_cache *block_group, -- cgit v1.2.3 From f38b6e754d8cc4605ac21d9c1094d569d88b163b Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 14 Mar 2011 13:40:51 +0800 Subject: Btrfs: Use bitmap_set/clear() No functional change. Signed-off-by: Li Zefan --- fs/btrfs/free-space-cache.c | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 3af64c6ea9df..0e23bbabbba2 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1134,15 +1134,13 @@ static void bitmap_clear_bits(struct btrfs_block_group_cache *block_group, struct btrfs_free_space *info, u64 offset, u64 bytes) { - unsigned long start, end; - unsigned long i; + unsigned long start, count; start = offset_to_bit(info->offset, block_group->sectorsize, offset); - end = start + bytes_to_bits(bytes, block_group->sectorsize); - BUG_ON(end > BITS_PER_BITMAP); + count = bytes_to_bits(bytes, block_group->sectorsize); + BUG_ON(start + count > BITS_PER_BITMAP); - for (i = start; i < end; i++) - clear_bit(i, info->bitmap); + bitmap_clear(info->bitmap, start, count); info->bytes -= bytes; block_group->free_space -= bytes; @@ -1152,15 +1150,13 @@ static void bitmap_set_bits(struct btrfs_block_group_cache *block_group, struct btrfs_free_space *info, u64 offset, u64 bytes) { - unsigned long start, end; - unsigned long i; + unsigned long start, count; start = offset_to_bit(info->offset, block_group->sectorsize, offset); - end = start + bytes_to_bits(bytes, block_group->sectorsize); - BUG_ON(end > BITS_PER_BITMAP); + count = bytes_to_bits(bytes, block_group->sectorsize); + BUG_ON(start + count > BITS_PER_BITMAP); - for (i = start; i < end; i++) - set_bit(i, info->bitmap); + bitmap_set(info->bitmap, start, count); info->bytes += bytes; block_group->free_space += bytes; -- cgit v1.2.3 From 34d52cb6c50b5a43901709998f59fb1c5a43dc4a Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 29 Mar 2011 13:46:06 +0800 Subject: Btrfs: Make free space cache code generic So we can re-use the code to cache free inode numbers. The change is quite straightforward. Two new structures are introduced. - struct btrfs_free_space_ctl We move those variables that are used for caching free space from struct btrfs_block_group_cache to this new struct. - struct btrfs_free_space_op We do block group specific work (e.g. calculation of extents threshold) through functions registered in this struct. And then we can remove references to struct btrfs_block_group_cache. Signed-off-by: Li Zefan --- fs/btrfs/ctree.h | 7 +- fs/btrfs/extent-tree.c | 37 ++-- fs/btrfs/free-space-cache.c | 430 ++++++++++++++++++++++++-------------------- fs/btrfs/free-space-cache.h | 20 +++ 4 files changed, 271 insertions(+), 223 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 2e61fe1b6b8c..d17e4a3b8bf7 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -830,9 +830,6 @@ struct btrfs_block_group_cache { u64 bytes_super; u64 flags; u64 sectorsize; - int extents_thresh; - int free_extents; - int total_bitmaps; unsigned int ro:1; unsigned int dirty:1; unsigned int iref:1; @@ -847,9 +844,7 @@ struct btrfs_block_group_cache { struct btrfs_space_info *space_info; /* free space cache stuff */ - spinlock_t tree_lock; - struct rb_root free_space_offset; - u64 free_space; + struct btrfs_free_space_ctl *free_space_ctl; /* block group cache stuff */ struct rb_node cache_node; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 31f33ba56fe8..904eae10ec65 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -105,6 +105,7 @@ void btrfs_put_block_group(struct btrfs_block_group_cache *cache) WARN_ON(cache->pinned > 0); WARN_ON(cache->reserved > 0); WARN_ON(cache->reserved_pinned > 0); + kfree(cache->free_space_ctl); kfree(cache); } } @@ -4893,7 +4894,7 @@ wait_block_group_cache_progress(struct btrfs_block_group_cache *cache, return 0; wait_event(caching_ctl->wait, block_group_cache_done(cache) || - (cache->free_space >= num_bytes)); + (cache->free_space_ctl->free_space >= num_bytes)); put_caching_control(caching_ctl); return 0; @@ -8551,10 +8552,16 @@ int btrfs_read_block_groups(struct btrfs_root *root) ret = -ENOMEM; goto error; } + cache->free_space_ctl = kzalloc(sizeof(*cache->free_space_ctl), + GFP_NOFS); + if (!cache->free_space_ctl) { + kfree(cache); + ret = -ENOMEM; + goto error; + } atomic_set(&cache->count, 1); spin_lock_init(&cache->lock); - spin_lock_init(&cache->tree_lock); cache->fs_info = info; INIT_LIST_HEAD(&cache->list); INIT_LIST_HEAD(&cache->cluster_list); @@ -8562,14 +8569,6 @@ int btrfs_read_block_groups(struct btrfs_root *root) if (need_clear) cache->disk_cache_state = BTRFS_DC_CLEAR; - /* - * we only want to have 32k of ram per block group for keeping - * track of free space, and if we pass 1/2 of that we want to - * start converting things over to using bitmaps - */ - cache->extents_thresh = ((1024 * 32) / 2) / - sizeof(struct btrfs_free_space); - read_extent_buffer(leaf, &cache->item, btrfs_item_ptr_offset(leaf, path->slots[0]), sizeof(cache->item)); @@ -8580,6 +8579,8 @@ int btrfs_read_block_groups(struct btrfs_root *root) cache->flags = btrfs_block_group_flags(&cache->item); cache->sectorsize = root->sectorsize; + btrfs_init_free_space_ctl(cache); + /* * We need to exclude the super stripes now so that the space * info has super bytes accounted for, otherwise we'll think @@ -8666,6 +8667,12 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, cache = kzalloc(sizeof(*cache), GFP_NOFS); if (!cache) return -ENOMEM; + cache->free_space_ctl = kzalloc(sizeof(*cache->free_space_ctl), + GFP_NOFS); + if (!cache->free_space_ctl) { + kfree(cache); + return -ENOMEM; + } cache->key.objectid = chunk_offset; cache->key.offset = size; @@ -8673,19 +8680,13 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, cache->sectorsize = root->sectorsize; cache->fs_info = root->fs_info; - /* - * we only want to have 32k of ram per block group for keeping track - * of free space, and if we pass 1/2 of that we want to start - * converting things over to using bitmaps - */ - cache->extents_thresh = ((1024 * 32) / 2) / - sizeof(struct btrfs_free_space); atomic_set(&cache->count, 1); spin_lock_init(&cache->lock); - spin_lock_init(&cache->tree_lock); INIT_LIST_HEAD(&cache->list); INIT_LIST_HEAD(&cache->cluster_list); + btrfs_init_free_space_ctl(cache); + btrfs_set_block_group_used(&cache->item, bytes_used); btrfs_set_block_group_chunk_objectid(&cache->item, chunk_objectid); cache->flags = type; diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 0e23bbabbba2..d4fb4f077a79 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -29,9 +29,7 @@ #define BITS_PER_BITMAP (PAGE_CACHE_SIZE * 8) #define MAX_CACHE_BYTES_PER_GIG (32 * 1024) -static void recalculate_thresholds(struct btrfs_block_group_cache - *block_group); -static int link_free_space(struct btrfs_block_group_cache *block_group, +static int link_free_space(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *info); struct inode *lookup_free_space_inode(struct btrfs_root *root, @@ -212,6 +210,7 @@ static int readahead_cache(struct inode *inode) int load_free_space_cache(struct btrfs_fs_info *fs_info, struct btrfs_block_group_cache *block_group) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_root *root = fs_info->tree_root; struct inode *inode; struct btrfs_free_space_header *header; @@ -417,9 +416,9 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, } if (entry->type == BTRFS_FREE_SPACE_EXTENT) { - spin_lock(&block_group->tree_lock); - ret = link_free_space(block_group, e); - spin_unlock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); + ret = link_free_space(ctl, e); + spin_unlock(&ctl->tree_lock); BUG_ON(ret); } else { e->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS); @@ -431,11 +430,11 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, page_cache_release(page); goto free_cache; } - spin_lock(&block_group->tree_lock); - ret = link_free_space(block_group, e); - block_group->total_bitmaps++; - recalculate_thresholds(block_group); - spin_unlock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); + ret = link_free_space(ctl, e); + ctl->total_bitmaps++; + ctl->op->recalc_thresholds(ctl); + spin_unlock(&ctl->tree_lock); list_add_tail(&e->list, &bitmaps); } @@ -471,16 +470,16 @@ next: index++; } - spin_lock(&block_group->tree_lock); - if (block_group->free_space != (block_group->key.offset - used - - block_group->bytes_super)) { - spin_unlock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); + if (ctl->free_space != (block_group->key.offset - used - + block_group->bytes_super)) { + spin_unlock(&ctl->tree_lock); printk(KERN_ERR "block group %llu has an wrong amount of free " "space\n", block_group->key.objectid); ret = 0; goto free_cache; } - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); ret = 1; out: @@ -503,6 +502,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, struct btrfs_block_group_cache *block_group, struct btrfs_path *path) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space_header *header; struct extent_buffer *leaf; struct inode *inode; @@ -546,7 +546,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, return 0; } - node = rb_first(&block_group->free_space_offset); + node = rb_first(&ctl->free_space_offset); if (!node) { iput(inode); return 0; @@ -851,30 +851,30 @@ out_free: return ret; } -static inline unsigned long offset_to_bit(u64 bitmap_start, u64 sectorsize, +static inline unsigned long offset_to_bit(u64 bitmap_start, u32 unit, u64 offset) { BUG_ON(offset < bitmap_start); offset -= bitmap_start; - return (unsigned long)(div64_u64(offset, sectorsize)); + return (unsigned long)(div_u64(offset, unit)); } -static inline unsigned long bytes_to_bits(u64 bytes, u64 sectorsize) +static inline unsigned long bytes_to_bits(u64 bytes, u32 unit) { - return (unsigned long)(div64_u64(bytes, sectorsize)); + return (unsigned long)(div_u64(bytes, unit)); } -static inline u64 offset_to_bitmap(struct btrfs_block_group_cache *block_group, +static inline u64 offset_to_bitmap(struct btrfs_free_space_ctl *ctl, u64 offset) { u64 bitmap_start; u64 bytes_per_bitmap; - bytes_per_bitmap = BITS_PER_BITMAP * block_group->sectorsize; - bitmap_start = offset - block_group->key.objectid; + bytes_per_bitmap = BITS_PER_BITMAP * ctl->unit; + bitmap_start = offset - ctl->start; bitmap_start = div64_u64(bitmap_start, bytes_per_bitmap); bitmap_start *= bytes_per_bitmap; - bitmap_start += block_group->key.objectid; + bitmap_start += ctl->start; return bitmap_start; } @@ -932,10 +932,10 @@ static int tree_insert_offset(struct rb_root *root, u64 offset, * offset. */ static struct btrfs_free_space * -tree_search_offset(struct btrfs_block_group_cache *block_group, +tree_search_offset(struct btrfs_free_space_ctl *ctl, u64 offset, int bitmap_only, int fuzzy) { - struct rb_node *n = block_group->free_space_offset.rb_node; + struct rb_node *n = ctl->free_space_offset.rb_node; struct btrfs_free_space *entry, *prev = NULL; /* find entry that is closest to the 'offset' */ @@ -1031,8 +1031,7 @@ tree_search_offset(struct btrfs_block_group_cache *block_group, break; } } - if (entry->offset + BITS_PER_BITMAP * - block_group->sectorsize > offset) + if (entry->offset + BITS_PER_BITMAP * ctl->unit > offset) return entry; } else if (entry->offset + entry->bytes > offset) return entry; @@ -1043,7 +1042,7 @@ tree_search_offset(struct btrfs_block_group_cache *block_group, while (1) { if (entry->bitmap) { if (entry->offset + BITS_PER_BITMAP * - block_group->sectorsize > offset) + ctl->unit > offset) break; } else { if (entry->offset + entry->bytes > offset) @@ -1059,42 +1058,47 @@ tree_search_offset(struct btrfs_block_group_cache *block_group, } static inline void -__unlink_free_space(struct btrfs_block_group_cache *block_group, +__unlink_free_space(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *info) { - rb_erase(&info->offset_index, &block_group->free_space_offset); - block_group->free_extents--; + rb_erase(&info->offset_index, &ctl->free_space_offset); + ctl->free_extents--; } -static void unlink_free_space(struct btrfs_block_group_cache *block_group, +static void unlink_free_space(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *info) { - __unlink_free_space(block_group, info); - block_group->free_space -= info->bytes; + __unlink_free_space(ctl, info); + ctl->free_space -= info->bytes; } -static int link_free_space(struct btrfs_block_group_cache *block_group, +static int link_free_space(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *info) { int ret = 0; BUG_ON(!info->bitmap && !info->bytes); - ret = tree_insert_offset(&block_group->free_space_offset, info->offset, + ret = tree_insert_offset(&ctl->free_space_offset, info->offset, &info->offset_index, (info->bitmap != NULL)); if (ret) return ret; - block_group->free_space += info->bytes; - block_group->free_extents++; + ctl->free_space += info->bytes; + ctl->free_extents++; return ret; } -static void recalculate_thresholds(struct btrfs_block_group_cache *block_group) +static void recalculate_thresholds(struct btrfs_free_space_ctl *ctl) { + struct btrfs_block_group_cache *block_group = ctl->private; u64 max_bytes; u64 bitmap_bytes; u64 extent_bytes; u64 size = block_group->key.offset; + u64 bytes_per_bg = BITS_PER_BITMAP * block_group->sectorsize; + int max_bitmaps = div64_u64(size + bytes_per_bg - 1, bytes_per_bg); + + BUG_ON(ctl->total_bitmaps > max_bitmaps); /* * The goal is to keep the total amount of memory used per 1gb of space @@ -1112,10 +1116,10 @@ static void recalculate_thresholds(struct btrfs_block_group_cache *block_group) * sure we don't go over our overall goal of MAX_CACHE_BYTES_PER_GIG as * we add more bitmaps. */ - bitmap_bytes = (block_group->total_bitmaps + 1) * PAGE_CACHE_SIZE; + bitmap_bytes = (ctl->total_bitmaps + 1) * PAGE_CACHE_SIZE; if (bitmap_bytes >= max_bytes) { - block_group->extents_thresh = 0; + ctl->extents_thresh = 0; return; } @@ -1126,43 +1130,43 @@ static void recalculate_thresholds(struct btrfs_block_group_cache *block_group) extent_bytes = max_bytes - bitmap_bytes; extent_bytes = min_t(u64, extent_bytes, div64_u64(max_bytes, 2)); - block_group->extents_thresh = + ctl->extents_thresh = div64_u64(extent_bytes, (sizeof(struct btrfs_free_space))); } -static void bitmap_clear_bits(struct btrfs_block_group_cache *block_group, +static void bitmap_clear_bits(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *info, u64 offset, u64 bytes) { unsigned long start, count; - start = offset_to_bit(info->offset, block_group->sectorsize, offset); - count = bytes_to_bits(bytes, block_group->sectorsize); + start = offset_to_bit(info->offset, ctl->unit, offset); + count = bytes_to_bits(bytes, ctl->unit); BUG_ON(start + count > BITS_PER_BITMAP); bitmap_clear(info->bitmap, start, count); info->bytes -= bytes; - block_group->free_space -= bytes; + ctl->free_space -= bytes; } -static void bitmap_set_bits(struct btrfs_block_group_cache *block_group, +static void bitmap_set_bits(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *info, u64 offset, u64 bytes) { unsigned long start, count; - start = offset_to_bit(info->offset, block_group->sectorsize, offset); - count = bytes_to_bits(bytes, block_group->sectorsize); + start = offset_to_bit(info->offset, ctl->unit, offset); + count = bytes_to_bits(bytes, ctl->unit); BUG_ON(start + count > BITS_PER_BITMAP); bitmap_set(info->bitmap, start, count); info->bytes += bytes; - block_group->free_space += bytes; + ctl->free_space += bytes; } -static int search_bitmap(struct btrfs_block_group_cache *block_group, +static int search_bitmap(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *bitmap_info, u64 *offset, u64 *bytes) { @@ -1170,9 +1174,9 @@ static int search_bitmap(struct btrfs_block_group_cache *block_group, unsigned long bits, i; unsigned long next_zero; - i = offset_to_bit(bitmap_info->offset, block_group->sectorsize, + i = offset_to_bit(bitmap_info->offset, ctl->unit, max_t(u64, *offset, bitmap_info->offset)); - bits = bytes_to_bits(*bytes, block_group->sectorsize); + bits = bytes_to_bits(*bytes, ctl->unit); for (i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i); i < BITS_PER_BITMAP; @@ -1187,29 +1191,25 @@ static int search_bitmap(struct btrfs_block_group_cache *block_group, } if (found_bits) { - *offset = (u64)(i * block_group->sectorsize) + - bitmap_info->offset; - *bytes = (u64)(found_bits) * block_group->sectorsize; + *offset = (u64)(i * ctl->unit) + bitmap_info->offset; + *bytes = (u64)(found_bits) * ctl->unit; return 0; } return -1; } -static struct btrfs_free_space *find_free_space(struct btrfs_block_group_cache - *block_group, u64 *offset, - u64 *bytes, int debug) +static struct btrfs_free_space * +find_free_space(struct btrfs_free_space_ctl *ctl, u64 *offset, u64 *bytes) { struct btrfs_free_space *entry; struct rb_node *node; int ret; - if (!block_group->free_space_offset.rb_node) + if (!ctl->free_space_offset.rb_node) return NULL; - entry = tree_search_offset(block_group, - offset_to_bitmap(block_group, *offset), - 0, 1); + entry = tree_search_offset(ctl, offset_to_bitmap(ctl, *offset), 0, 1); if (!entry) return NULL; @@ -1219,7 +1219,7 @@ static struct btrfs_free_space *find_free_space(struct btrfs_block_group_cache continue; if (entry->bitmap) { - ret = search_bitmap(block_group, entry, offset, bytes); + ret = search_bitmap(ctl, entry, offset, bytes); if (!ret) return entry; continue; @@ -1233,33 +1233,28 @@ static struct btrfs_free_space *find_free_space(struct btrfs_block_group_cache return NULL; } -static void add_new_bitmap(struct btrfs_block_group_cache *block_group, +static void add_new_bitmap(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *info, u64 offset) { - u64 bytes_per_bg = BITS_PER_BITMAP * block_group->sectorsize; - int max_bitmaps = (int)div64_u64(block_group->key.offset + - bytes_per_bg - 1, bytes_per_bg); - BUG_ON(block_group->total_bitmaps >= max_bitmaps); - - info->offset = offset_to_bitmap(block_group, offset); + info->offset = offset_to_bitmap(ctl, offset); info->bytes = 0; - link_free_space(block_group, info); - block_group->total_bitmaps++; + link_free_space(ctl, info); + ctl->total_bitmaps++; - recalculate_thresholds(block_group); + ctl->op->recalc_thresholds(ctl); } -static void free_bitmap(struct btrfs_block_group_cache *block_group, +static void free_bitmap(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *bitmap_info) { - unlink_free_space(block_group, bitmap_info); + unlink_free_space(ctl, bitmap_info); kfree(bitmap_info->bitmap); kmem_cache_free(btrfs_free_space_cachep, bitmap_info); - block_group->total_bitmaps--; - recalculate_thresholds(block_group); + ctl->total_bitmaps--; + ctl->op->recalc_thresholds(ctl); } -static noinline int remove_from_bitmap(struct btrfs_block_group_cache *block_group, +static noinline int remove_from_bitmap(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *bitmap_info, u64 *offset, u64 *bytes) { @@ -1268,8 +1263,7 @@ static noinline int remove_from_bitmap(struct btrfs_block_group_cache *block_gro int ret; again: - end = bitmap_info->offset + - (u64)(BITS_PER_BITMAP * block_group->sectorsize) - 1; + end = bitmap_info->offset + (u64)(BITS_PER_BITMAP * ctl->unit) - 1; /* * XXX - this can go away after a few releases. @@ -1284,24 +1278,22 @@ again: search_start = *offset; search_bytes = *bytes; search_bytes = min(search_bytes, end - search_start + 1); - ret = search_bitmap(block_group, bitmap_info, &search_start, - &search_bytes); + ret = search_bitmap(ctl, bitmap_info, &search_start, &search_bytes); BUG_ON(ret < 0 || search_start != *offset); if (*offset > bitmap_info->offset && *offset + *bytes > end) { - bitmap_clear_bits(block_group, bitmap_info, *offset, - end - *offset + 1); + bitmap_clear_bits(ctl, bitmap_info, *offset, end - *offset + 1); *bytes -= end - *offset + 1; *offset = end + 1; } else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) { - bitmap_clear_bits(block_group, bitmap_info, *offset, *bytes); + bitmap_clear_bits(ctl, bitmap_info, *offset, *bytes); *bytes = 0; } if (*bytes) { struct rb_node *next = rb_next(&bitmap_info->offset_index); if (!bitmap_info->bytes) - free_bitmap(block_group, bitmap_info); + free_bitmap(ctl, bitmap_info); /* * no entry after this bitmap, but we still have bytes to @@ -1328,31 +1320,28 @@ again: */ search_start = *offset; search_bytes = *bytes; - ret = search_bitmap(block_group, bitmap_info, &search_start, + ret = search_bitmap(ctl, bitmap_info, &search_start, &search_bytes); if (ret < 0 || search_start != *offset) return -EAGAIN; goto again; } else if (!bitmap_info->bytes) - free_bitmap(block_group, bitmap_info); + free_bitmap(ctl, bitmap_info); return 0; } -static int insert_into_bitmap(struct btrfs_block_group_cache *block_group, - struct btrfs_free_space *info) +static bool use_bitmap(struct btrfs_free_space_ctl *ctl, + struct btrfs_free_space *info) { - struct btrfs_free_space *bitmap_info; - int added = 0; - u64 bytes, offset, end; - int ret; + struct btrfs_block_group_cache *block_group = ctl->private; /* * If we are below the extents threshold then we can add this as an * extent, and don't have to deal with the bitmap */ - if (block_group->free_extents < block_group->extents_thresh) { + if (ctl->free_extents < ctl->extents_thresh) { /* * If this block group has some small extents we don't want to * use up all of our free slots in the cache with them, we want @@ -1361,11 +1350,10 @@ static int insert_into_bitmap(struct btrfs_block_group_cache *block_group, * the overhead of a bitmap if we don't have to. */ if (info->bytes <= block_group->sectorsize * 4) { - if (block_group->free_extents * 2 <= - block_group->extents_thresh) - return 0; + if (ctl->free_extents * 2 <= ctl->extents_thresh) + return false; } else { - return 0; + return false; } } @@ -1375,31 +1363,42 @@ static int insert_into_bitmap(struct btrfs_block_group_cache *block_group, */ if (BITS_PER_BITMAP * block_group->sectorsize > block_group->key.offset) - return 0; + return false; + + return true; +} + +static int insert_into_bitmap(struct btrfs_free_space_ctl *ctl, + struct btrfs_free_space *info) +{ + struct btrfs_free_space *bitmap_info; + int added = 0; + u64 bytes, offset, end; + int ret; bytes = info->bytes; offset = info->offset; + if (!ctl->op->use_bitmap(ctl, info)) + return 0; + again: - bitmap_info = tree_search_offset(block_group, - offset_to_bitmap(block_group, offset), + bitmap_info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 1, 0); if (!bitmap_info) { BUG_ON(added); goto new_bitmap; } - end = bitmap_info->offset + - (u64)(BITS_PER_BITMAP * block_group->sectorsize); + end = bitmap_info->offset + (u64)(BITS_PER_BITMAP * ctl->unit); if (offset >= bitmap_info->offset && offset + bytes > end) { - bitmap_set_bits(block_group, bitmap_info, offset, - end - offset); + bitmap_set_bits(ctl, bitmap_info, offset, end - offset); bytes -= end - offset; offset = end; added = 0; } else if (offset >= bitmap_info->offset && offset + bytes <= end) { - bitmap_set_bits(block_group, bitmap_info, offset, bytes); + bitmap_set_bits(ctl, bitmap_info, offset, bytes); bytes = 0; } else { BUG(); @@ -1413,19 +1412,19 @@ again: new_bitmap: if (info && info->bitmap) { - add_new_bitmap(block_group, info, offset); + add_new_bitmap(ctl, info, offset); added = 1; info = NULL; goto again; } else { - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); /* no pre-allocated info, allocate a new one */ if (!info) { info = kmem_cache_zalloc(btrfs_free_space_cachep, GFP_NOFS); if (!info) { - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); ret = -ENOMEM; goto out; } @@ -1433,7 +1432,7 @@ new_bitmap: /* allocate the bitmap */ info->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS); - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); if (!info->bitmap) { ret = -ENOMEM; goto out; @@ -1451,7 +1450,7 @@ out: return ret; } -bool try_merge_free_space(struct btrfs_block_group_cache *block_group, +bool try_merge_free_space(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *info, bool update_stat) { struct btrfs_free_space *left_info; @@ -1465,18 +1464,18 @@ bool try_merge_free_space(struct btrfs_block_group_cache *block_group, * are adding, if there is remove that struct and add a new one to * cover the entire range */ - right_info = tree_search_offset(block_group, offset + bytes, 0, 0); + right_info = tree_search_offset(ctl, offset + bytes, 0, 0); if (right_info && rb_prev(&right_info->offset_index)) left_info = rb_entry(rb_prev(&right_info->offset_index), struct btrfs_free_space, offset_index); else - left_info = tree_search_offset(block_group, offset - 1, 0, 0); + left_info = tree_search_offset(ctl, offset - 1, 0, 0); if (right_info && !right_info->bitmap) { if (update_stat) - unlink_free_space(block_group, right_info); + unlink_free_space(ctl, right_info); else - __unlink_free_space(block_group, right_info); + __unlink_free_space(ctl, right_info); info->bytes += right_info->bytes; kmem_cache_free(btrfs_free_space_cachep, right_info); merged = true; @@ -1485,9 +1484,9 @@ bool try_merge_free_space(struct btrfs_block_group_cache *block_group, if (left_info && !left_info->bitmap && left_info->offset + left_info->bytes == offset) { if (update_stat) - unlink_free_space(block_group, left_info); + unlink_free_space(ctl, left_info); else - __unlink_free_space(block_group, left_info); + __unlink_free_space(ctl, left_info); info->offset = left_info->offset; info->bytes += left_info->bytes; kmem_cache_free(btrfs_free_space_cachep, left_info); @@ -1500,6 +1499,7 @@ bool try_merge_free_space(struct btrfs_block_group_cache *block_group, int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, u64 offset, u64 bytes) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *info; int ret = 0; @@ -1510,9 +1510,9 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, info->offset = offset; info->bytes = bytes; - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); - if (try_merge_free_space(block_group, info, true)) + if (try_merge_free_space(ctl, info, true)) goto link; /* @@ -1520,7 +1520,7 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, * extent then we know we're going to have to allocate a new extent, so * before we do that see if we need to drop this into a bitmap */ - ret = insert_into_bitmap(block_group, info); + ret = insert_into_bitmap(ctl, info); if (ret < 0) { goto out; } else if (ret) { @@ -1528,11 +1528,11 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, goto out; } link: - ret = link_free_space(block_group, info); + ret = link_free_space(ctl, info); if (ret) kmem_cache_free(btrfs_free_space_cachep, info); out: - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); if (ret) { printk(KERN_CRIT "btrfs: unable to add free space :%d\n", ret); @@ -1545,21 +1545,21 @@ out: int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, u64 offset, u64 bytes) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *info; struct btrfs_free_space *next_info = NULL; int ret = 0; - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); again: - info = tree_search_offset(block_group, offset, 0, 0); + info = tree_search_offset(ctl, offset, 0, 0); if (!info) { /* * oops didn't find an extent that matched the space we wanted * to remove, look for a bitmap instead */ - info = tree_search_offset(block_group, - offset_to_bitmap(block_group, offset), + info = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 1, 0); if (!info) { WARN_ON(1); @@ -1574,8 +1574,8 @@ again: offset_index); if (next_info->bitmap) - end = next_info->offset + BITS_PER_BITMAP * - block_group->sectorsize - 1; + end = next_info->offset + + BITS_PER_BITMAP * ctl->unit - 1; else end = next_info->offset + next_info->bytes; @@ -1595,20 +1595,20 @@ again: } if (info->bytes == bytes) { - unlink_free_space(block_group, info); + unlink_free_space(ctl, info); if (info->bitmap) { kfree(info->bitmap); - block_group->total_bitmaps--; + ctl->total_bitmaps--; } kmem_cache_free(btrfs_free_space_cachep, info); goto out_lock; } if (!info->bitmap && info->offset == offset) { - unlink_free_space(block_group, info); + unlink_free_space(ctl, info); info->offset += bytes; info->bytes -= bytes; - link_free_space(block_group, info); + link_free_space(ctl, info); goto out_lock; } @@ -1622,13 +1622,13 @@ again: * first unlink the old info and then * insert it again after the hole we're creating */ - unlink_free_space(block_group, info); + unlink_free_space(ctl, info); if (offset + bytes < info->offset + info->bytes) { u64 old_end = info->offset + info->bytes; info->offset = offset + bytes; info->bytes = old_end - info->offset; - ret = link_free_space(block_group, info); + ret = link_free_space(ctl, info); WARN_ON(ret); if (ret) goto out_lock; @@ -1638,7 +1638,7 @@ again: */ kmem_cache_free(btrfs_free_space_cachep, info); } - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); /* step two, insert a new info struct to cover * anything before the hole @@ -1649,12 +1649,12 @@ again: goto out; } - ret = remove_from_bitmap(block_group, info, &offset, &bytes); + ret = remove_from_bitmap(ctl, info, &offset, &bytes); if (ret == -EAGAIN) goto again; BUG_ON(ret); out_lock: - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); out: return ret; } @@ -1662,11 +1662,12 @@ out: void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group, u64 bytes) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *info; struct rb_node *n; int count = 0; - for (n = rb_first(&block_group->free_space_offset); n; n = rb_next(n)) { + for (n = rb_first(&ctl->free_space_offset); n; n = rb_next(n)) { info = rb_entry(n, struct btrfs_free_space, offset_index); if (info->bytes >= bytes) count++; @@ -1681,6 +1682,30 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group, "\n", count); } +static struct btrfs_free_space_op free_space_op = { + .recalc_thresholds = recalculate_thresholds, + .use_bitmap = use_bitmap, +}; + +void btrfs_init_free_space_ctl(struct btrfs_block_group_cache *block_group) +{ + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; + + spin_lock_init(&ctl->tree_lock); + ctl->unit = block_group->sectorsize; + ctl->start = block_group->key.objectid; + ctl->private = block_group; + ctl->op = &free_space_op; + + /* + * we only want to have 32k of ram per block group for keeping + * track of free space, and if we pass 1/2 of that we want to + * start converting things over to using bitmaps + */ + ctl->extents_thresh = ((1024 * 32) / 2) / + sizeof(struct btrfs_free_space); +} + /* * for a given cluster, put all of its extents back into the free * space cache. If the block group passed doesn't match the block group @@ -1692,6 +1717,7 @@ __btrfs_return_cluster_to_free_space( struct btrfs_block_group_cache *block_group, struct btrfs_free_cluster *cluster) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *entry; struct rb_node *node; @@ -1713,8 +1739,8 @@ __btrfs_return_cluster_to_free_space( bitmap = (entry->bitmap != NULL); if (!bitmap) - try_merge_free_space(block_group, entry, false); - tree_insert_offset(&block_group->free_space_offset, + try_merge_free_space(ctl, entry, false); + tree_insert_offset(&ctl->free_space_offset, entry->offset, &entry->offset_index, bitmap); } cluster->root = RB_ROOT; @@ -1727,12 +1753,13 @@ out: void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *info; struct rb_node *node; struct btrfs_free_cluster *cluster; struct list_head *head; - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); while ((head = block_group->cluster_list.next) != &block_group->cluster_list) { cluster = list_entry(head, struct btrfs_free_cluster, @@ -1741,57 +1768,58 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group) WARN_ON(cluster->block_group != block_group); __btrfs_return_cluster_to_free_space(block_group, cluster); if (need_resched()) { - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); cond_resched(); - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); } } - while ((node = rb_last(&block_group->free_space_offset)) != NULL) { + while ((node = rb_last(&ctl->free_space_offset)) != NULL) { info = rb_entry(node, struct btrfs_free_space, offset_index); - unlink_free_space(block_group, info); + unlink_free_space(ctl, info); if (info->bitmap) kfree(info->bitmap); kmem_cache_free(btrfs_free_space_cachep, info); if (need_resched()) { - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); cond_resched(); - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); } } - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); } u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group, u64 offset, u64 bytes, u64 empty_size) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *entry = NULL; u64 bytes_search = bytes + empty_size; u64 ret = 0; - spin_lock(&block_group->tree_lock); - entry = find_free_space(block_group, &offset, &bytes_search, 0); + spin_lock(&ctl->tree_lock); + entry = find_free_space(ctl, &offset, &bytes_search); if (!entry) goto out; ret = offset; if (entry->bitmap) { - bitmap_clear_bits(block_group, entry, offset, bytes); + bitmap_clear_bits(ctl, entry, offset, bytes); if (!entry->bytes) - free_bitmap(block_group, entry); + free_bitmap(ctl, entry); } else { - unlink_free_space(block_group, entry); + unlink_free_space(ctl, entry); entry->offset += bytes; entry->bytes -= bytes; if (!entry->bytes) kmem_cache_free(btrfs_free_space_cachep, entry); else - link_free_space(block_group, entry); + link_free_space(ctl, entry); } out: - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); return ret; } @@ -1808,6 +1836,7 @@ int btrfs_return_cluster_to_free_space( struct btrfs_block_group_cache *block_group, struct btrfs_free_cluster *cluster) { + struct btrfs_free_space_ctl *ctl; int ret; /* first, get a safe pointer to the block group */ @@ -1826,10 +1855,12 @@ int btrfs_return_cluster_to_free_space( atomic_inc(&block_group->count); spin_unlock(&cluster->lock); + ctl = block_group->free_space_ctl; + /* now return any extents the cluster had on it */ - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); ret = __btrfs_return_cluster_to_free_space(block_group, cluster); - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); /* finally drop our ref */ btrfs_put_block_group(block_group); @@ -1841,6 +1872,7 @@ static u64 btrfs_alloc_from_bitmap(struct btrfs_block_group_cache *block_group, struct btrfs_free_space *entry, u64 bytes, u64 min_start) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; int err; u64 search_start = cluster->window_start; u64 search_bytes = bytes; @@ -1849,13 +1881,12 @@ static u64 btrfs_alloc_from_bitmap(struct btrfs_block_group_cache *block_group, search_start = min_start; search_bytes = bytes; - err = search_bitmap(block_group, entry, &search_start, - &search_bytes); + err = search_bitmap(ctl, entry, &search_start, &search_bytes); if (err) return 0; ret = search_start; - bitmap_clear_bits(block_group, entry, ret, bytes); + bitmap_clear_bits(ctl, entry, ret, bytes); return ret; } @@ -1869,6 +1900,7 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group, struct btrfs_free_cluster *cluster, u64 bytes, u64 min_start) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *entry = NULL; struct rb_node *node; u64 ret = 0; @@ -1929,20 +1961,20 @@ out: if (!ret) return 0; - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); - block_group->free_space -= bytes; + ctl->free_space -= bytes; if (entry->bytes == 0) { - block_group->free_extents--; + ctl->free_extents--; if (entry->bitmap) { kfree(entry->bitmap); - block_group->total_bitmaps--; - recalculate_thresholds(block_group); + ctl->total_bitmaps--; + ctl->op->recalc_thresholds(ctl); } kmem_cache_free(btrfs_free_space_cachep, entry); } - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); return ret; } @@ -1952,6 +1984,7 @@ static int btrfs_bitmap_cluster(struct btrfs_block_group_cache *block_group, struct btrfs_free_cluster *cluster, u64 offset, u64 bytes, u64 min_bytes) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; unsigned long next_zero; unsigned long i; unsigned long search_bits; @@ -2006,7 +2039,7 @@ again: cluster->window_start = start * block_group->sectorsize + entry->offset; - rb_erase(&entry->offset_index, &block_group->free_space_offset); + rb_erase(&entry->offset_index, &ctl->free_space_offset); ret = tree_insert_offset(&cluster->root, entry->offset, &entry->offset_index, 1); BUG_ON(ret); @@ -2021,6 +2054,7 @@ static int setup_cluster_no_bitmap(struct btrfs_block_group_cache *block_group, struct btrfs_free_cluster *cluster, u64 offset, u64 bytes, u64 min_bytes) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *first = NULL; struct btrfs_free_space *entry = NULL; struct btrfs_free_space *prev = NULL; @@ -2031,7 +2065,7 @@ static int setup_cluster_no_bitmap(struct btrfs_block_group_cache *block_group, u64 max_extent; u64 max_gap = 128 * 1024; - entry = tree_search_offset(block_group, offset, 0, 1); + entry = tree_search_offset(ctl, offset, 0, 1); if (!entry) return -ENOSPC; @@ -2097,7 +2131,7 @@ static int setup_cluster_no_bitmap(struct btrfs_block_group_cache *block_group, if (entry->bitmap) continue; - rb_erase(&entry->offset_index, &block_group->free_space_offset); + rb_erase(&entry->offset_index, &ctl->free_space_offset); ret = tree_insert_offset(&cluster->root, entry->offset, &entry->offset_index, 0); BUG_ON(ret); @@ -2116,16 +2150,15 @@ static int setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, struct btrfs_free_cluster *cluster, u64 offset, u64 bytes, u64 min_bytes) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *entry; struct rb_node *node; int ret = -ENOSPC; - if (block_group->total_bitmaps == 0) + if (ctl->total_bitmaps == 0) return -ENOSPC; - entry = tree_search_offset(block_group, - offset_to_bitmap(block_group, offset), - 0, 1); + entry = tree_search_offset(ctl, offset_to_bitmap(ctl, offset), 0, 1); if (!entry) return -ENOSPC; @@ -2158,6 +2191,7 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, struct btrfs_free_cluster *cluster, u64 offset, u64 bytes, u64 empty_size) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; u64 min_bytes; int ret; @@ -2177,14 +2211,14 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, } else min_bytes = max(bytes, (bytes + empty_size) >> 2); - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); /* * If we know we don't have enough space to make a cluster don't even * bother doing all the work to try and find one. */ - if (block_group->free_space < min_bytes) { - spin_unlock(&block_group->tree_lock); + if (ctl->free_space < min_bytes) { + spin_unlock(&ctl->tree_lock); return -ENOSPC; } @@ -2210,7 +2244,7 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, } out: spin_unlock(&cluster->lock); - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); return ret; } @@ -2231,6 +2265,7 @@ void btrfs_init_free_cluster(struct btrfs_free_cluster *cluster) int btrfs_trim_block_group(struct btrfs_block_group_cache *block_group, u64 *trimmed, u64 start, u64 end, u64 minlen) { + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *entry = NULL; struct btrfs_fs_info *fs_info = block_group->fs_info; u64 bytes = 0; @@ -2240,52 +2275,50 @@ int btrfs_trim_block_group(struct btrfs_block_group_cache *block_group, *trimmed = 0; while (start < end) { - spin_lock(&block_group->tree_lock); + spin_lock(&ctl->tree_lock); - if (block_group->free_space < minlen) { - spin_unlock(&block_group->tree_lock); + if (ctl->free_space < minlen) { + spin_unlock(&ctl->tree_lock); break; } - entry = tree_search_offset(block_group, start, 0, 1); + entry = tree_search_offset(ctl, start, 0, 1); if (!entry) - entry = tree_search_offset(block_group, - offset_to_bitmap(block_group, - start), + entry = tree_search_offset(ctl, + offset_to_bitmap(ctl, start), 1, 1); if (!entry || entry->offset >= end) { - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); break; } if (entry->bitmap) { - ret = search_bitmap(block_group, entry, &start, &bytes); + ret = search_bitmap(ctl, entry, &start, &bytes); if (!ret) { if (start >= end) { - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); break; } bytes = min(bytes, end - start); - bitmap_clear_bits(block_group, entry, - start, bytes); + bitmap_clear_bits(ctl, entry, start, bytes); if (entry->bytes == 0) - free_bitmap(block_group, entry); + free_bitmap(ctl, entry); } else { start = entry->offset + BITS_PER_BITMAP * block_group->sectorsize; - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); ret = 0; continue; } } else { start = entry->offset; bytes = min(entry->bytes, end - start); - unlink_free_space(block_group, entry); + unlink_free_space(ctl, entry); kfree(entry); } - spin_unlock(&block_group->tree_lock); + spin_unlock(&ctl->tree_lock); if (bytes >= minlen) { int update_ret; @@ -2297,8 +2330,7 @@ int btrfs_trim_block_group(struct btrfs_block_group_cache *block_group, bytes, &actually_trimmed); - btrfs_add_free_space(block_group, - start, bytes); + btrfs_add_free_space(block_group, start, bytes); if (!update_ret) btrfs_update_reserved_bytes(block_group, bytes, 0, 1); diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h index 12b2b5165f8a..a64a23fae1eb 100644 --- a/fs/btrfs/free-space-cache.h +++ b/fs/btrfs/free-space-cache.h @@ -27,6 +27,25 @@ struct btrfs_free_space { struct list_head list; }; +struct btrfs_free_space_ctl { + spinlock_t tree_lock; + struct rb_root free_space_offset; + u64 free_space; + int extents_thresh; + int free_extents; + int total_bitmaps; + int unit; + u64 start; + struct btrfs_free_space_op *op; + void *private; +}; + +struct btrfs_free_space_op { + void (*recalc_thresholds)(struct btrfs_free_space_ctl *ctl); + bool (*use_bitmap)(struct btrfs_free_space_ctl *ctl, + struct btrfs_free_space *info); +}; + struct inode *lookup_free_space_inode(struct btrfs_root *root, struct btrfs_block_group_cache *block_group, struct btrfs_path *path); @@ -45,6 +64,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, struct btrfs_trans_handle *trans, struct btrfs_block_group_cache *block_group, struct btrfs_path *path); +void btrfs_init_free_space_ctl(struct btrfs_block_group_cache *block_group); int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, u64 bytenr, u64 size); int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, -- cgit v1.2.3 From 581bb050941b4f220f84d3e5ed6dace3d42dd382 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 20 Apr 2011 10:06:11 +0800 Subject: Btrfs: Cache free inode numbers in memory Currently btrfs stores the highest objectid of the fs tree, and it always returns (highest+1) inode number when we create a file, so inode numbers won't be reclaimed when we delete files, so we'll run out of inode numbers as we keep create/delete files in 32bits machines. This fixes it, and it works similarly to how we cache free space in block cgroups. We start a kernel thread to read the file tree. By scanning inode items, we know which chunks of inode numbers are free, and we cache them in an rb-tree. Because we are searching the commit root, we have to carefully handle the cross-transaction case. The rb-tree is a hybrid extent+bitmap tree, so if we have too many small chunks of inode numbers, we'll use bitmaps. Initially we allow 16K ram of extents, and a bitmap will be used if we exceed this threshold. The extents threshold is adjusted in runtime. Signed-off-by: Li Zefan --- fs/btrfs/ctree.h | 15 +- fs/btrfs/disk-io.c | 18 +++ fs/btrfs/free-space-cache.c | 96 ++++++++++--- fs/btrfs/free-space-cache.h | 16 ++- fs/btrfs/inode-map.c | 341 +++++++++++++++++++++++++++++++++++++++++++- fs/btrfs/inode-map.h | 11 ++ fs/btrfs/inode.c | 42 ++++-- fs/btrfs/ioctl.c | 4 +- fs/btrfs/relocation.c | 3 +- fs/btrfs/transaction.c | 7 +- 10 files changed, 500 insertions(+), 53 deletions(-) create mode 100644 fs/btrfs/inode-map.h diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index d17e4a3b8bf7..c96a4e4c5566 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1102,6 +1102,15 @@ struct btrfs_root { spinlock_t accounting_lock; struct btrfs_block_rsv *block_rsv; + /* free ino cache stuff */ + struct mutex fs_commit_mutex; + struct btrfs_free_space_ctl *free_ino_ctl; + enum btrfs_caching_type cached; + spinlock_t cache_lock; + wait_queue_head_t cache_wait; + struct btrfs_free_space_ctl *free_ino_pinned; + u64 cache_progress; + struct mutex log_mutex; wait_queue_head_t log_writer_wait; wait_queue_head_t log_commit_wait[2]; @@ -2408,12 +2417,6 @@ int btrfs_del_orphan_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 offset); int btrfs_find_orphan_item(struct btrfs_root *root, u64 offset); -/* inode-map.c */ -int btrfs_find_free_objectid(struct btrfs_trans_handle *trans, - struct btrfs_root *fs_root, - u64 dirid, u64 *objectid); -int btrfs_find_highest_inode(struct btrfs_root *fs_root, u64 *objectid); - /* inode-item.c */ int btrfs_insert_inode_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root, diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index ef6865c17cd6..d02683b1ee16 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -41,6 +41,7 @@ #include "locking.h" #include "tree-log.h" #include "free-space-cache.h" +#include "inode-map.h" static struct extent_io_ops btree_extent_io_ops; static void end_workqueue_fn(struct btrfs_work *work); @@ -1327,6 +1328,19 @@ again: if (IS_ERR(root)) return root; + root->free_ino_ctl = kzalloc(sizeof(*root->free_ino_ctl), GFP_NOFS); + if (!root->free_ino_ctl) + goto fail; + root->free_ino_pinned = kzalloc(sizeof(*root->free_ino_pinned), + GFP_NOFS); + if (!root->free_ino_pinned) + goto fail; + + btrfs_init_free_ino_ctl(root); + mutex_init(&root->fs_commit_mutex); + spin_lock_init(&root->cache_lock); + init_waitqueue_head(&root->cache_wait); + set_anon_super(&root->anon_super, NULL); if (btrfs_root_refs(&root->root_item) == 0) { @@ -2483,6 +2497,8 @@ int btrfs_free_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root) if (btrfs_root_refs(&root->root_item) == 0) synchronize_srcu(&fs_info->subvol_srcu); + __btrfs_remove_free_space_cache(root->free_ino_pinned); + __btrfs_remove_free_space_cache(root->free_ino_ctl); free_fs_root(root); return 0; } @@ -2496,6 +2512,8 @@ static void free_fs_root(struct btrfs_root *root) } free_extent_buffer(root->node); free_extent_buffer(root->commit_root); + kfree(root->free_ino_ctl); + kfree(root->free_ino_pinned); kfree(root->name); kfree(root); } diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index d4fb4f077a79..2ce89bfc8815 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -25,6 +25,7 @@ #include "transaction.h" #include "disk-io.h" #include "extent_io.h" +#include "inode-map.h" #define BITS_PER_BITMAP (PAGE_CACHE_SIZE * 8) #define MAX_CACHE_BYTES_PER_GIG (32 * 1024) @@ -105,7 +106,7 @@ int create_free_space_inode(struct btrfs_root *root, u64 objectid; int ret; - ret = btrfs_find_free_objectid(trans, root, 0, &objectid); + ret = btrfs_find_free_objectid(root, &objectid); if (ret < 0) return ret; @@ -1496,10 +1497,9 @@ bool try_merge_free_space(struct btrfs_free_space_ctl *ctl, return merged; } -int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, - u64 offset, u64 bytes) +int __btrfs_add_free_space(struct btrfs_free_space_ctl *ctl, + u64 offset, u64 bytes) { - struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *info; int ret = 0; @@ -1751,11 +1751,29 @@ out: return 0; } -void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group) +void __btrfs_remove_free_space_cache(struct btrfs_free_space_ctl *ctl) { - struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_space *info; struct rb_node *node; + + spin_lock(&ctl->tree_lock); + while ((node = rb_last(&ctl->free_space_offset)) != NULL) { + info = rb_entry(node, struct btrfs_free_space, offset_index); + unlink_free_space(ctl, info); + kfree(info->bitmap); + kmem_cache_free(btrfs_free_space_cachep, info); + if (need_resched()) { + spin_unlock(&ctl->tree_lock); + cond_resched(); + spin_lock(&ctl->tree_lock); + } + } + spin_unlock(&ctl->tree_lock); +} + +void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group) +{ + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; struct btrfs_free_cluster *cluster; struct list_head *head; @@ -1773,21 +1791,9 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group) spin_lock(&ctl->tree_lock); } } - - while ((node = rb_last(&ctl->free_space_offset)) != NULL) { - info = rb_entry(node, struct btrfs_free_space, offset_index); - unlink_free_space(ctl, info); - if (info->bitmap) - kfree(info->bitmap); - kmem_cache_free(btrfs_free_space_cachep, info); - if (need_resched()) { - spin_unlock(&ctl->tree_lock); - cond_resched(); - spin_lock(&ctl->tree_lock); - } - } - spin_unlock(&ctl->tree_lock); + + __btrfs_remove_free_space_cache(ctl); } u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group, @@ -2352,3 +2358,53 @@ int btrfs_trim_block_group(struct btrfs_block_group_cache *block_group, return ret; } + +/* + * Find the left-most item in the cache tree, and then return the + * smallest inode number in the item. + * + * Note: the returned inode number may not be the smallest one in + * the tree, if the left-most item is a bitmap. + */ +u64 btrfs_find_ino_for_alloc(struct btrfs_root *fs_root) +{ + struct btrfs_free_space_ctl *ctl = fs_root->free_ino_ctl; + struct btrfs_free_space *entry = NULL; + u64 ino = 0; + + spin_lock(&ctl->tree_lock); + + if (RB_EMPTY_ROOT(&ctl->free_space_offset)) + goto out; + + entry = rb_entry(rb_first(&ctl->free_space_offset), + struct btrfs_free_space, offset_index); + + if (!entry->bitmap) { + ino = entry->offset; + + unlink_free_space(ctl, entry); + entry->offset++; + entry->bytes--; + if (!entry->bytes) + kmem_cache_free(btrfs_free_space_cachep, entry); + else + link_free_space(ctl, entry); + } else { + u64 offset = 0; + u64 count = 1; + int ret; + + ret = search_bitmap(ctl, entry, &offset, &count); + BUG_ON(ret); + + ino = offset; + bitmap_clear_bits(ctl, entry, offset, 1); + if (entry->bytes == 0) + free_bitmap(ctl, entry); + } +out: + spin_unlock(&ctl->tree_lock); + + return ino; +} diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h index a64a23fae1eb..af06e6b6ceaa 100644 --- a/fs/btrfs/free-space-cache.h +++ b/fs/btrfs/free-space-cache.h @@ -64,15 +64,25 @@ int btrfs_write_out_cache(struct btrfs_root *root, struct btrfs_trans_handle *trans, struct btrfs_block_group_cache *block_group, struct btrfs_path *path); + void btrfs_init_free_space_ctl(struct btrfs_block_group_cache *block_group); -int btrfs_add_free_space(struct btrfs_block_group_cache *block_group, - u64 bytenr, u64 size); +int __btrfs_add_free_space(struct btrfs_free_space_ctl *ctl, + u64 bytenr, u64 size); +static inline int +btrfs_add_free_space(struct btrfs_block_group_cache *block_group, + u64 bytenr, u64 size) +{ + return __btrfs_add_free_space(block_group->free_space_ctl, + bytenr, size); +} int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group, u64 bytenr, u64 size); +void __btrfs_remove_free_space_cache(struct btrfs_free_space_ctl *ctl); void btrfs_remove_free_space_cache(struct btrfs_block_group_cache - *block_group); + *block_group); u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group, u64 offset, u64 bytes, u64 empty_size); +u64 btrfs_find_ino_for_alloc(struct btrfs_root *fs_root); void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group, u64 bytes); int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c index c05a08f4c411..5be62df90c4f 100644 --- a/fs/btrfs/inode-map.c +++ b/fs/btrfs/inode-map.c @@ -16,11 +16,343 @@ * Boston, MA 021110-1307, USA. */ +#include +#include +#include + #include "ctree.h" #include "disk-io.h" +#include "free-space-cache.h" +#include "inode-map.h" #include "transaction.h" -int btrfs_find_highest_inode(struct btrfs_root *root, u64 *objectid) +static int caching_kthread(void *data) +{ + struct btrfs_root *root = data; + struct btrfs_fs_info *fs_info = root->fs_info; + struct btrfs_free_space_ctl *ctl = root->free_ino_ctl; + struct btrfs_key key; + struct btrfs_path *path; + struct extent_buffer *leaf; + u64 last = (u64)-1; + int slot; + int ret; + + path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + + /* Since the commit root is read-only, we can safely skip locking. */ + path->skip_locking = 1; + path->search_commit_root = 1; + path->reada = 2; + + key.objectid = BTRFS_FIRST_FREE_OBJECTID; + key.offset = 0; + key.type = BTRFS_INODE_ITEM_KEY; +again: + /* need to make sure the commit_root doesn't disappear */ + mutex_lock(&root->fs_commit_mutex); + + ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); + if (ret < 0) + goto out; + + while (1) { + smp_mb(); + if (fs_info->closing > 1) + goto out; + + leaf = path->nodes[0]; + slot = path->slots[0]; + if (path->slots[0] >= btrfs_header_nritems(leaf)) { + ret = btrfs_next_leaf(root, path); + if (ret < 0) + goto out; + else if (ret > 0) + break; + + if (need_resched() || + btrfs_transaction_in_commit(fs_info)) { + leaf = path->nodes[0]; + + if (btrfs_header_nritems(leaf) == 0) { + WARN_ON(1); + break; + } + + /* + * Save the key so we can advances forward + * in the next search. + */ + btrfs_item_key_to_cpu(leaf, &key, 0); + btrfs_release_path(root, path); + root->cache_progress = last; + mutex_unlock(&root->fs_commit_mutex); + schedule_timeout(1); + goto again; + } else + continue; + } + + btrfs_item_key_to_cpu(leaf, &key, slot); + + if (key.type != BTRFS_INODE_ITEM_KEY) + goto next; + + if (key.objectid >= BTRFS_LAST_FREE_OBJECTID) + break; + + if (last != (u64)-1 && last + 1 != key.objectid) { + __btrfs_add_free_space(ctl, last + 1, + key.objectid - last - 1); + wake_up(&root->cache_wait); + } + + last = key.objectid; +next: + path->slots[0]++; + } + + if (last < BTRFS_LAST_FREE_OBJECTID - 1) { + __btrfs_add_free_space(ctl, last + 1, + BTRFS_LAST_FREE_OBJECTID - last - 1); + } + + spin_lock(&root->cache_lock); + root->cached = BTRFS_CACHE_FINISHED; + spin_unlock(&root->cache_lock); + + root->cache_progress = (u64)-1; + btrfs_unpin_free_ino(root); +out: + wake_up(&root->cache_wait); + mutex_unlock(&root->fs_commit_mutex); + + btrfs_free_path(path); + + return ret; +} + +static void start_caching(struct btrfs_root *root) +{ + struct task_struct *tsk; + + spin_lock(&root->cache_lock); + if (root->cached != BTRFS_CACHE_NO) { + spin_unlock(&root->cache_lock); + return; + } + + root->cached = BTRFS_CACHE_STARTED; + spin_unlock(&root->cache_lock); + + tsk = kthread_run(caching_kthread, root, "btrfs-ino-cache-%llu\n", + root->root_key.objectid); + BUG_ON(IS_ERR(tsk)); +} + +int btrfs_find_free_ino(struct btrfs_root *root, u64 *objectid) +{ +again: + *objectid = btrfs_find_ino_for_alloc(root); + + if (*objectid != 0) + return 0; + + start_caching(root); + + wait_event(root->cache_wait, + root->cached == BTRFS_CACHE_FINISHED || + root->free_ino_ctl->free_space > 0); + + if (root->cached == BTRFS_CACHE_FINISHED && + root->free_ino_ctl->free_space == 0) + return -ENOSPC; + else + goto again; +} + +void btrfs_return_ino(struct btrfs_root *root, u64 objectid) +{ + struct btrfs_free_space_ctl *ctl = root->free_ino_ctl; + struct btrfs_free_space_ctl *pinned = root->free_ino_pinned; +again: + if (root->cached == BTRFS_CACHE_FINISHED) { + __btrfs_add_free_space(ctl, objectid, 1); + } else { + /* + * If we are in the process of caching free ino chunks, + * to avoid adding the same inode number to the free_ino + * tree twice due to cross transaction, we'll leave it + * in the pinned tree until a transaction is committed + * or the caching work is done. + */ + + mutex_lock(&root->fs_commit_mutex); + spin_lock(&root->cache_lock); + if (root->cached == BTRFS_CACHE_FINISHED) { + spin_unlock(&root->cache_lock); + mutex_unlock(&root->fs_commit_mutex); + goto again; + } + spin_unlock(&root->cache_lock); + + start_caching(root); + + if (objectid <= root->cache_progress) + __btrfs_add_free_space(ctl, objectid, 1); + else + __btrfs_add_free_space(pinned, objectid, 1); + + mutex_unlock(&root->fs_commit_mutex); + } +} + +/* + * When a transaction is committed, we'll move those inode numbers which + * are smaller than root->cache_progress from pinned tree to free_ino tree, + * and others will just be dropped, because the commit root we were + * searching has changed. + * + * Must be called with root->fs_commit_mutex held + */ +void btrfs_unpin_free_ino(struct btrfs_root *root) +{ + struct btrfs_free_space_ctl *ctl = root->free_ino_ctl; + struct rb_root *rbroot = &root->free_ino_pinned->free_space_offset; + struct btrfs_free_space *info; + struct rb_node *n; + u64 count; + + while (1) { + n = rb_first(rbroot); + if (!n) + break; + + info = rb_entry(n, struct btrfs_free_space, offset_index); + BUG_ON(info->bitmap); + + if (info->offset > root->cache_progress) + goto free; + else if (info->offset + info->bytes > root->cache_progress) + count = root->cache_progress - info->offset + 1; + else + count = info->bytes; + + __btrfs_add_free_space(ctl, info->offset, count); +free: + rb_erase(&info->offset_index, rbroot); + kfree(info); + } +} + +#define INIT_THRESHOLD (((1024 * 32) / 2) / sizeof(struct btrfs_free_space)) +#define INODES_PER_BITMAP (PAGE_CACHE_SIZE * 8) + +/* + * The goal is to keep the memory used by the free_ino tree won't + * exceed the memory if we use bitmaps only. + */ +static void recalculate_thresholds(struct btrfs_free_space_ctl *ctl) +{ + struct btrfs_free_space *info; + struct rb_node *n; + int max_ino; + int max_bitmaps; + + n = rb_last(&ctl->free_space_offset); + if (!n) { + ctl->extents_thresh = INIT_THRESHOLD; + return; + } + info = rb_entry(n, struct btrfs_free_space, offset_index); + + /* + * Find the maximum inode number in the filesystem. Note we + * ignore the fact that this can be a bitmap, because we are + * not doing precise calculation. + */ + max_ino = info->bytes - 1; + + max_bitmaps = ALIGN(max_ino, INODES_PER_BITMAP) / INODES_PER_BITMAP; + if (max_bitmaps <= ctl->total_bitmaps) { + ctl->extents_thresh = 0; + return; + } + + ctl->extents_thresh = (max_bitmaps - ctl->total_bitmaps) * + PAGE_CACHE_SIZE / sizeof(*info); +} + +/* + * We don't fall back to bitmap, if we are below the extents threshold + * or this chunk of inode numbers is a big one. + */ +static bool use_bitmap(struct btrfs_free_space_ctl *ctl, + struct btrfs_free_space *info) +{ + if (ctl->free_extents < ctl->extents_thresh || + info->bytes > INODES_PER_BITMAP / 10) + return false; + + return true; +} + +static struct btrfs_free_space_op free_ino_op = { + .recalc_thresholds = recalculate_thresholds, + .use_bitmap = use_bitmap, +}; + +static void pinned_recalc_thresholds(struct btrfs_free_space_ctl *ctl) +{ +} + +static bool pinned_use_bitmap(struct btrfs_free_space_ctl *ctl, + struct btrfs_free_space *info) +{ + /* + * We always use extents for two reasons: + * + * - The pinned tree is only used during the process of caching + * work. + * - Make code simpler. See btrfs_unpin_free_ino(). + */ + return false; +} + +static struct btrfs_free_space_op pinned_free_ino_op = { + .recalc_thresholds = pinned_recalc_thresholds, + .use_bitmap = pinned_use_bitmap, +}; + +void btrfs_init_free_ino_ctl(struct btrfs_root *root) +{ + struct btrfs_free_space_ctl *ctl = root->free_ino_ctl; + struct btrfs_free_space_ctl *pinned = root->free_ino_pinned; + + spin_lock_init(&ctl->tree_lock); + ctl->unit = 1; + ctl->start = 0; + ctl->private = NULL; + ctl->op = &free_ino_op; + + /* + * Initially we allow to use 16K of ram to cache chunks of + * inode numbers before we resort to bitmaps. This is somewhat + * arbitrary, but it will be adjusted in runtime. + */ + ctl->extents_thresh = INIT_THRESHOLD; + + spin_lock_init(&pinned->tree_lock); + pinned->unit = 1; + pinned->start = 0; + pinned->private = NULL; + pinned->extents_thresh = 0; + pinned->op = &pinned_free_ino_op; +} + +static int btrfs_find_highest_objectid(struct btrfs_root *root, u64 *objectid) { struct btrfs_path *path; int ret; @@ -55,15 +387,14 @@ error: return ret; } -int btrfs_find_free_objectid(struct btrfs_trans_handle *trans, - struct btrfs_root *root, - u64 dirid, u64 *objectid) +int btrfs_find_free_objectid(struct btrfs_root *root, u64 *objectid) { int ret; mutex_lock(&root->objectid_mutex); if (unlikely(root->highest_objectid < BTRFS_FIRST_FREE_OBJECTID)) { - ret = btrfs_find_highest_inode(root, &root->highest_objectid); + ret = btrfs_find_highest_objectid(root, + &root->highest_objectid); if (ret) goto out; } diff --git a/fs/btrfs/inode-map.h b/fs/btrfs/inode-map.h new file mode 100644 index 000000000000..eb918451b492 --- /dev/null +++ b/fs/btrfs/inode-map.h @@ -0,0 +1,11 @@ +#ifndef __BTRFS_INODE_MAP +#define __BTRFS_INODE_MAP + +void btrfs_init_free_ino_ctl(struct btrfs_root *root); +void btrfs_unpin_free_ino(struct btrfs_root *root); +void btrfs_return_ino(struct btrfs_root *root, u64 objectid); +int btrfs_find_free_ino(struct btrfs_root *root, u64 *objectid); + +int btrfs_find_free_objectid(struct btrfs_root *root, u64 *objectid); + +#endif diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a4157cfdd533..77dd0a776c83 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -51,6 +51,7 @@ #include "compression.h" #include "locking.h" #include "free-space-cache.h" +#include "inode-map.h" struct btrfs_iget_args { u64 ino; @@ -3809,6 +3810,10 @@ void btrfs_evict_inode(struct inode *inode) BUG_ON(ret); } + if (!(root == root->fs_info->tree_root || + root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)) + btrfs_return_ino(root, inode->i_ino); + nr = trans->blocks_used; btrfs_end_transaction(trans, root); btrfs_btree_balance_dirty(root, nr); @@ -4538,6 +4543,12 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans, return ERR_PTR(-ENOMEM); } + /* + * we have to initialize this early, so we can reclaim the inode + * number if we fail afterwards in this function. + */ + inode->i_ino = objectid; + if (dir) { trace_btrfs_inode_request(dir); @@ -4583,7 +4594,6 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans, goto fail; inode_init_owner(inode, dir, mode); - inode->i_ino = objectid; inode_set_bytes(inode, 0); inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; inode_item = btrfs_item_ptr(path->nodes[0], path->slots[0], @@ -4712,10 +4722,6 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, if (!new_valid_dev(rdev)) return -EINVAL; - err = btrfs_find_free_objectid(NULL, root, dir->i_ino, &objectid); - if (err) - return err; - /* * 2 for inode item and ref * 2 for dir items @@ -4727,6 +4733,10 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, btrfs_set_trans_block_group(trans, dir); + err = btrfs_find_free_ino(root, &objectid); + if (err) + goto out_unlock; + inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, dentry->d_name.len, dir->i_ino, objectid, BTRFS_I(dir)->block_group, mode, &index); @@ -4774,9 +4784,6 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, u64 objectid; u64 index = 0; - err = btrfs_find_free_objectid(NULL, root, dir->i_ino, &objectid); - if (err) - return err; /* * 2 for inode item and ref * 2 for dir items @@ -4788,6 +4795,10 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, btrfs_set_trans_block_group(trans, dir); + err = btrfs_find_free_ino(root, &objectid); + if (err) + goto out_unlock; + inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, dentry->d_name.len, dir->i_ino, objectid, BTRFS_I(dir)->block_group, mode, &index); @@ -4902,10 +4913,6 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) u64 index = 0; unsigned long nr = 1; - err = btrfs_find_free_objectid(NULL, root, dir->i_ino, &objectid); - if (err) - return err; - /* * 2 items for inode and ref * 2 items for dir items @@ -4916,6 +4923,10 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) return PTR_ERR(trans); btrfs_set_trans_block_group(trans, dir); + err = btrfs_find_free_ino(root, &objectid); + if (err) + goto out_fail; + inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, dentry->d_name.len, dir->i_ino, objectid, BTRFS_I(dir)->block_group, S_IFDIR | mode, @@ -7257,9 +7268,6 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(root)) return -ENAMETOOLONG; - err = btrfs_find_free_objectid(NULL, root, dir->i_ino, &objectid); - if (err) - return err; /* * 2 items for inode item and ref * 2 items for dir items @@ -7271,6 +7279,10 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, btrfs_set_trans_block_group(trans, dir); + err = btrfs_find_free_ino(root, &objectid); + if (err) + goto out_unlock; + inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, dentry->d_name.len, dir->i_ino, objectid, BTRFS_I(dir)->block_group, S_IFLNK|S_IRWXUGO, diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index f580a3a5d2fc..e1835f8eec93 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -50,6 +50,7 @@ #include "print-tree.h" #include "volumes.h" #include "locking.h" +#include "inode-map.h" /* Mask out flags that are inappropriate for the given type of inode. */ static inline __u32 btrfs_mask_flags(umode_t mode, __u32 flags) @@ -323,8 +324,7 @@ static noinline int create_subvol(struct btrfs_root *root, u64 new_dirid = BTRFS_FIRST_FREE_OBJECTID; u64 index = 0; - ret = btrfs_find_free_objectid(NULL, root->fs_info->tree_root, - 0, &objectid); + ret = btrfs_find_free_objectid(root->fs_info->tree_root, &objectid); if (ret) { dput(parent); return ret; diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 58250e09eb05..e6cb89357256 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -30,6 +30,7 @@ #include "btrfs_inode.h" #include "async-thread.h" #include "free-space-cache.h" +#include "inode-map.h" /* * backref_node, mapping_node and tree_block start with this @@ -3897,7 +3898,7 @@ struct inode *create_reloc_inode(struct btrfs_fs_info *fs_info, if (IS_ERR(trans)) return ERR_CAST(trans); - err = btrfs_find_free_objectid(trans, root, objectid, &objectid); + err = btrfs_find_free_objectid(root, &objectid); if (err) goto out; diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index c571734d5e5a..aef6c81e7101 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -27,6 +27,7 @@ #include "transaction.h" #include "locking.h" #include "tree-log.h" +#include "inode-map.h" #define BTRFS_ROOT_TRANS_TAG 0 @@ -761,7 +762,11 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans, btrfs_orphan_commit_root(trans, root); if (root->commit_root != root->node) { + mutex_lock(&root->fs_commit_mutex); switch_commit_root(root); + btrfs_unpin_free_ino(root); + mutex_unlock(&root->fs_commit_mutex); + btrfs_set_root_node(&root->root_item, root->node); } @@ -930,7 +935,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, goto fail; } - ret = btrfs_find_free_objectid(trans, tree_root, 0, &objectid); + ret = btrfs_find_free_objectid(tree_root, &objectid); if (ret) { pending->error = ret; goto fail; -- cgit v1.2.3 From 0414efae7989a2183fb2cc000ab285c4c2836a00 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 20 Apr 2011 10:20:14 +0800 Subject: Btrfs: Make the code for reading/writing free space cache generic Extract out block group specific code from lookup_free_space_inode(), create_free_space_inode(), load_free_space_cache() and btrfs_write_out_cache(), so the code can be used to read/write free ino cache. Signed-off-by: Li Zefan --- fs/btrfs/free-space-cache.c | 358 +++++++++++++++++++++++++------------------- 1 file changed, 204 insertions(+), 154 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 2ce89bfc8815..fcbdcef6ca28 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -33,9 +33,9 @@ static int link_free_space(struct btrfs_free_space_ctl *ctl, struct btrfs_free_space *info); -struct inode *lookup_free_space_inode(struct btrfs_root *root, - struct btrfs_block_group_cache - *block_group, struct btrfs_path *path) +static struct inode *__lookup_free_space_inode(struct btrfs_root *root, + struct btrfs_path *path, + u64 offset) { struct btrfs_key key; struct btrfs_key location; @@ -45,15 +45,8 @@ struct inode *lookup_free_space_inode(struct btrfs_root *root, struct inode *inode = NULL; int ret; - spin_lock(&block_group->lock); - if (block_group->inode) - inode = igrab(block_group->inode); - spin_unlock(&block_group->lock); - if (inode) - return inode; - key.objectid = BTRFS_FREE_SPACE_OBJECTID; - key.offset = block_group->key.objectid; + key.offset = offset; key.type = 0; ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); @@ -83,6 +76,27 @@ struct inode *lookup_free_space_inode(struct btrfs_root *root, inode->i_mapping->flags &= ~__GFP_FS; + return inode; +} + +struct inode *lookup_free_space_inode(struct btrfs_root *root, + struct btrfs_block_group_cache + *block_group, struct btrfs_path *path) +{ + struct inode *inode = NULL; + + spin_lock(&block_group->lock); + if (block_group->inode) + inode = igrab(block_group->inode); + spin_unlock(&block_group->lock); + if (inode) + return inode; + + inode = __lookup_free_space_inode(root, path, + block_group->key.objectid); + if (IS_ERR(inode)) + return inode; + spin_lock(&block_group->lock); if (!root->fs_info->closing) { block_group->inode = igrab(inode); @@ -93,24 +107,18 @@ struct inode *lookup_free_space_inode(struct btrfs_root *root, return inode; } -int create_free_space_inode(struct btrfs_root *root, - struct btrfs_trans_handle *trans, - struct btrfs_block_group_cache *block_group, - struct btrfs_path *path) +int __create_free_space_inode(struct btrfs_root *root, + struct btrfs_trans_handle *trans, + struct btrfs_path *path, u64 ino, u64 offset) { struct btrfs_key key; struct btrfs_disk_key disk_key; struct btrfs_free_space_header *header; struct btrfs_inode_item *inode_item; struct extent_buffer *leaf; - u64 objectid; int ret; - ret = btrfs_find_free_objectid(root, &objectid); - if (ret < 0) - return ret; - - ret = btrfs_insert_empty_inode(trans, root, path, objectid); + ret = btrfs_insert_empty_inode(trans, root, path, ino); if (ret) return ret; @@ -130,13 +138,12 @@ int create_free_space_inode(struct btrfs_root *root, BTRFS_INODE_PREALLOC | BTRFS_INODE_NODATASUM); btrfs_set_inode_nlink(leaf, inode_item, 1); btrfs_set_inode_transid(leaf, inode_item, trans->transid); - btrfs_set_inode_block_group(leaf, inode_item, - block_group->key.objectid); + btrfs_set_inode_block_group(leaf, inode_item, offset); btrfs_mark_buffer_dirty(leaf); btrfs_release_path(root, path); key.objectid = BTRFS_FREE_SPACE_OBJECTID; - key.offset = block_group->key.objectid; + key.offset = offset; key.type = 0; ret = btrfs_insert_empty_item(trans, root, path, &key, @@ -156,6 +163,22 @@ int create_free_space_inode(struct btrfs_root *root, return 0; } +int create_free_space_inode(struct btrfs_root *root, + struct btrfs_trans_handle *trans, + struct btrfs_block_group_cache *block_group, + struct btrfs_path *path) +{ + int ret; + u64 ino; + + ret = btrfs_find_free_objectid(root, &ino); + if (ret < 0) + return ret; + + return __create_free_space_inode(root, trans, path, ino, + block_group->key.objectid); +} + int btrfs_truncate_free_space_cache(struct btrfs_root *root, struct btrfs_trans_handle *trans, struct btrfs_path *path, @@ -208,16 +231,13 @@ static int readahead_cache(struct inode *inode) return 0; } -int load_free_space_cache(struct btrfs_fs_info *fs_info, - struct btrfs_block_group_cache *block_group) +int __load_free_space_cache(struct btrfs_root *root, struct inode *inode, + struct btrfs_free_space_ctl *ctl, + struct btrfs_path *path, u64 offset) { - struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; - struct btrfs_root *root = fs_info->tree_root; - struct inode *inode; struct btrfs_free_space_header *header; struct extent_buffer *leaf; struct page *page; - struct btrfs_path *path; u32 *checksums = NULL, *crc; char *disk_crcs = NULL; struct btrfs_key key; @@ -225,76 +245,47 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, u64 num_entries; u64 num_bitmaps; u64 generation; - u64 used = btrfs_block_group_used(&block_group->item); u32 cur_crc = ~(u32)0; pgoff_t index = 0; unsigned long first_page_offset; int num_checksums; - int ret = 0; - - /* - * If we're unmounting then just return, since this does a search on the - * normal root and not the commit root and we could deadlock. - */ - smp_mb(); - if (fs_info->closing) - return 0; - - /* - * If this block group has been marked to be cleared for one reason or - * another then we can't trust the on disk cache, so just return. - */ - spin_lock(&block_group->lock); - if (block_group->disk_cache_state != BTRFS_DC_WRITTEN) { - spin_unlock(&block_group->lock); - return 0; - } - spin_unlock(&block_group->lock); + int ret = 0, ret2; INIT_LIST_HEAD(&bitmaps); - path = btrfs_alloc_path(); - if (!path) - return 0; - - inode = lookup_free_space_inode(root, block_group, path); - if (IS_ERR(inode)) { - btrfs_free_path(path); - return 0; - } - /* Nothing in the space cache, goodbye */ - if (!i_size_read(inode)) { - btrfs_free_path(path); + if (!i_size_read(inode)) goto out; - } key.objectid = BTRFS_FREE_SPACE_OBJECTID; - key.offset = block_group->key.objectid; + key.offset = offset; key.type = 0; ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); - if (ret) { - btrfs_free_path(path); + if (ret < 0) + goto out; + else if (ret > 0) { + btrfs_release_path(root, path); + ret = 0; goto out; } + ret = -1; + leaf = path->nodes[0]; header = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_free_space_header); num_entries = btrfs_free_space_entries(leaf, header); num_bitmaps = btrfs_free_space_bitmaps(leaf, header); generation = btrfs_free_space_generation(leaf, header); - btrfs_free_path(path); + btrfs_release_path(root, path); if (BTRFS_I(inode)->generation != generation) { printk(KERN_ERR "btrfs: free space inode generation (%llu) did" - " not match free space cache generation (%llu) for " - "block group %llu\n", + " not match free space cache generation (%llu)\n", (unsigned long long)BTRFS_I(inode)->generation, - (unsigned long long)generation, - (unsigned long long)block_group->key.objectid); - goto free_cache; + (unsigned long long)generation); + goto out; } if (!num_entries) @@ -311,10 +302,8 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, goto out; ret = readahead_cache(inode); - if (ret) { - ret = 0; + if (ret) goto out; - } while (1) { struct btrfs_free_space_entry *entry; @@ -333,10 +322,8 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, } page = grab_cache_page(inode->i_mapping, index); - if (!page) { - ret = 0; + if (!page) goto free_cache; - } if (!PageUptodate(page)) { btrfs_readpage(NULL, page); @@ -345,9 +332,7 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, unlock_page(page); page_cache_release(page); printk(KERN_ERR "btrfs: error reading free " - "space cache: %llu\n", - (unsigned long long) - block_group->key.objectid); + "space cache\n"); goto free_cache; } } @@ -360,13 +345,10 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, gen = addr + (sizeof(u32) * num_checksums); if (*gen != BTRFS_I(inode)->generation) { printk(KERN_ERR "btrfs: space cache generation" - " (%llu) does not match inode (%llu) " - "for block group %llu\n", + " (%llu) does not match inode (%llu)\n", (unsigned long long)*gen, (unsigned long long) - BTRFS_I(inode)->generation, - (unsigned long long) - block_group->key.objectid); + BTRFS_I(inode)->generation); kunmap(page); unlock_page(page); page_cache_release(page); @@ -382,9 +364,8 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, PAGE_CACHE_SIZE - start_offset); btrfs_csum_final(cur_crc, (char *)&cur_crc); if (cur_crc != *crc) { - printk(KERN_ERR "btrfs: crc mismatch for page %lu in " - "block group %llu\n", index, - (unsigned long long)block_group->key.objectid); + printk(KERN_ERR "btrfs: crc mismatch for page %lu\n", + index); kunmap(page); unlock_page(page); page_cache_release(page); @@ -432,7 +413,7 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, goto free_cache; } spin_lock(&ctl->tree_lock); - ret = link_free_space(ctl, e); + ret2 = link_free_space(ctl, e); ctl->total_bitmaps++; ctl->op->recalc_thresholds(ctl); spin_unlock(&ctl->tree_lock); @@ -471,42 +452,96 @@ next: index++; } - spin_lock(&ctl->tree_lock); - if (ctl->free_space != (block_group->key.offset - used - - block_group->bytes_super)) { - spin_unlock(&ctl->tree_lock); - printk(KERN_ERR "block group %llu has an wrong amount of free " - "space\n", block_group->key.objectid); - ret = 0; - goto free_cache; - } - spin_unlock(&ctl->tree_lock); - ret = 1; out: kfree(checksums); kfree(disk_crcs); - iput(inode); return ret; - free_cache: - /* This cache is bogus, make sure it gets cleared */ - spin_lock(&block_group->lock); - block_group->disk_cache_state = BTRFS_DC_CLEAR; - spin_unlock(&block_group->lock); - btrfs_remove_free_space_cache(block_group); + __btrfs_remove_free_space_cache(ctl); goto out; } -int btrfs_write_out_cache(struct btrfs_root *root, - struct btrfs_trans_handle *trans, - struct btrfs_block_group_cache *block_group, - struct btrfs_path *path) +int load_free_space_cache(struct btrfs_fs_info *fs_info, + struct btrfs_block_group_cache *block_group) { struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; + struct btrfs_root *root = fs_info->tree_root; + struct inode *inode; + struct btrfs_path *path; + int ret; + bool matched; + u64 used = btrfs_block_group_used(&block_group->item); + + /* + * If we're unmounting then just return, since this does a search on the + * normal root and not the commit root and we could deadlock. + */ + smp_mb(); + if (fs_info->closing) + return 0; + + /* + * If this block group has been marked to be cleared for one reason or + * another then we can't trust the on disk cache, so just return. + */ + spin_lock(&block_group->lock); + if (block_group->disk_cache_state != BTRFS_DC_WRITTEN) { + spin_unlock(&block_group->lock); + return 0; + } + spin_unlock(&block_group->lock); + + path = btrfs_alloc_path(); + if (!path) + return 0; + + inode = lookup_free_space_inode(root, block_group, path); + if (IS_ERR(inode)) { + btrfs_free_path(path); + return 0; + } + + ret = __load_free_space_cache(fs_info->tree_root, inode, ctl, + path, block_group->key.objectid); + btrfs_free_path(path); + if (ret <= 0) + goto out; + + spin_lock(&ctl->tree_lock); + matched = (ctl->free_space == (block_group->key.offset - used - + block_group->bytes_super)); + spin_unlock(&ctl->tree_lock); + + if (!matched) { + __btrfs_remove_free_space_cache(ctl); + printk(KERN_ERR "block group %llu has an wrong amount of free " + "space\n", block_group->key.objectid); + ret = -1; + } +out: + if (ret < 0) { + /* This cache is bogus, make sure it gets cleared */ + spin_lock(&block_group->lock); + block_group->disk_cache_state = BTRFS_DC_CLEAR; + spin_unlock(&block_group->lock); + + printk(KERN_ERR "btrfs: failed to load free space cache " + "for block group %llu\n", block_group->key.objectid); + } + + iput(inode); + return ret; +} + +int __btrfs_write_out_cache(struct btrfs_root *root, struct inode *inode, + struct btrfs_free_space_ctl *ctl, + struct btrfs_block_group_cache *block_group, + struct btrfs_trans_handle *trans, + struct btrfs_path *path, u64 offset) +{ struct btrfs_free_space_header *header; struct extent_buffer *leaf; - struct inode *inode; struct rb_node *node; struct list_head *pos, *n; struct page **pages; @@ -523,35 +558,18 @@ int btrfs_write_out_cache(struct btrfs_root *root, int index = 0, num_pages = 0; int entries = 0; int bitmaps = 0; - int ret = 0; + int ret = -1; bool next_page = false; bool out_of_space = false; - root = root->fs_info->tree_root; - INIT_LIST_HEAD(&bitmap_list); - spin_lock(&block_group->lock); - if (block_group->disk_cache_state < BTRFS_DC_SETUP) { - spin_unlock(&block_group->lock); - return 0; - } - spin_unlock(&block_group->lock); - - inode = lookup_free_space_inode(root, block_group, path); - if (IS_ERR(inode)) - return 0; - - if (!i_size_read(inode)) { - iput(inode); - return 0; - } - node = rb_first(&ctl->free_space_offset); - if (!node) { - iput(inode); + if (!node) return 0; - } + + if (!i_size_read(inode)) + return -1; num_pages = (i_size_read(inode) + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT; @@ -561,16 +579,13 @@ int btrfs_write_out_cache(struct btrfs_root *root, /* We need a checksum per page. */ crc = checksums = kzalloc(sizeof(u32) * num_pages, GFP_NOFS); - if (!crc) { - iput(inode); - return 0; - } + if (!crc) + return -1; pages = kzalloc(sizeof(struct page *) * num_pages, GFP_NOFS); if (!pages) { kfree(crc); - iput(inode); - return 0; + return -1; } /* Since the first page has all of our checksums and our generation we @@ -580,7 +595,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, first_page_offset = (sizeof(u32) * num_pages) + sizeof(u64); /* Get the cluster for this block_group if it exists */ - if (!list_empty(&block_group->cluster_list)) + if (block_group && !list_empty(&block_group->cluster_list)) cluster = list_entry(block_group->cluster_list.next, struct btrfs_free_cluster, block_group_list); @@ -622,7 +637,8 @@ int btrfs_write_out_cache(struct btrfs_root *root, * When searching for pinned extents, we need to start at our start * offset. */ - start = block_group->key.objectid; + if (block_group) + start = block_group->key.objectid; /* Write out the extent entries */ do { @@ -680,8 +696,9 @@ int btrfs_write_out_cache(struct btrfs_root *root, * We want to add any pinned extents to our free space cache * so we don't leak the space */ - while (!next_page && (start < block_group->key.objectid + - block_group->key.offset)) { + while (block_group && !next_page && + (start < block_group->key.objectid + + block_group->key.offset)) { ret = find_first_extent_bit(unpin, start, &start, &end, EXTENT_DIRTY); if (ret) { @@ -799,12 +816,12 @@ int btrfs_write_out_cache(struct btrfs_root *root, filemap_write_and_wait(inode->i_mapping); key.objectid = BTRFS_FREE_SPACE_OBJECTID; - key.offset = block_group->key.objectid; + key.offset = offset; key.type = 0; ret = btrfs_search_slot(trans, root, &key, path, 1, 1); if (ret < 0) { - ret = 0; + ret = -1; clear_extent_bit(&BTRFS_I(inode)->io_tree, 0, bytes - 1, EXTENT_DIRTY | EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING, 0, 0, NULL, GFP_NOFS); @@ -817,8 +834,8 @@ int btrfs_write_out_cache(struct btrfs_root *root, path->slots[0]--; btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); if (found_key.objectid != BTRFS_FREE_SPACE_OBJECTID || - found_key.offset != block_group->key.objectid) { - ret = 0; + found_key.offset != offset) { + ret = -1; clear_extent_bit(&BTRFS_I(inode)->io_tree, 0, bytes - 1, EXTENT_DIRTY | EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING, 0, 0, NULL, @@ -838,16 +855,49 @@ int btrfs_write_out_cache(struct btrfs_root *root, ret = 1; out_free: - if (ret == 0) { + if (ret != 1) { invalidate_inode_pages2_range(inode->i_mapping, 0, index); - spin_lock(&block_group->lock); - block_group->disk_cache_state = BTRFS_DC_ERROR; - spin_unlock(&block_group->lock); BTRFS_I(inode)->generation = 0; } kfree(checksums); kfree(pages); btrfs_update_inode(trans, root, inode); + return ret; +} + +int btrfs_write_out_cache(struct btrfs_root *root, + struct btrfs_trans_handle *trans, + struct btrfs_block_group_cache *block_group, + struct btrfs_path *path) +{ + struct btrfs_free_space_ctl *ctl = block_group->free_space_ctl; + struct inode *inode; + int ret = 0; + + root = root->fs_info->tree_root; + + spin_lock(&block_group->lock); + if (block_group->disk_cache_state < BTRFS_DC_SETUP) { + spin_unlock(&block_group->lock); + return 0; + } + spin_unlock(&block_group->lock); + + inode = lookup_free_space_inode(root, block_group, path); + if (IS_ERR(inode)) + return 0; + + ret = __btrfs_write_out_cache(root, inode, ctl, block_group, trans, + path, block_group->key.objectid); + if (ret < 0) { + spin_lock(&block_group->lock); + block_group->disk_cache_state = BTRFS_DC_ERROR; + spin_unlock(&block_group->lock); + + printk(KERN_ERR "btrfs: failed to write free space cace " + "for block group %llu\n", block_group->key.objectid); + } + iput(inode); return ret; } -- cgit v1.2.3 From 33345d01522f8152f99dc84a3e7a1a45707f387f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 20 Apr 2011 10:31:50 +0800 Subject: Btrfs: Always use 64bit inode number There's a potential problem in 32bit system when we exhaust 32bit inode numbers and start to allocate big inode numbers, because btrfs uses inode->i_ino in many places. So here we always use BTRFS_I(inode)->location.objectid, which is an u64 variable. There are 2 exceptions that BTRFS_I(inode)->location.objectid != inode->i_ino: the btree inode (0 vs 1) and empty subvol dirs (256 vs 2), and inode->i_ino will be used in those cases. Another reason to make this change is I'm going to use a special inode to save free ino cache, and the inode number must be > (u64)-256. Signed-off-by: Li Zefan --- fs/btrfs/btrfs_inode.h | 9 +++ fs/btrfs/compression.c | 5 +- fs/btrfs/export.c | 25 ++++--- fs/btrfs/extent-tree.c | 10 +-- fs/btrfs/extent_io.c | 4 +- fs/btrfs/file-item.c | 5 +- fs/btrfs/file.c | 27 +++---- fs/btrfs/inode.c | 197 ++++++++++++++++++++++++++----------------------- fs/btrfs/ioctl.c | 18 ++--- fs/btrfs/relocation.c | 24 +++--- fs/btrfs/transaction.c | 4 +- fs/btrfs/tree-log.c | 54 +++++++------- fs/btrfs/xattr.c | 8 +- 13 files changed, 208 insertions(+), 182 deletions(-) diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index 57c3bb2884ce..8842a4195f91 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -166,6 +166,15 @@ static inline struct btrfs_inode *BTRFS_I(struct inode *inode) return container_of(inode, struct btrfs_inode, vfs_inode); } +static inline u64 btrfs_ino(struct inode *inode) +{ + u64 ino = BTRFS_I(inode)->location.objectid; + + if (ino <= BTRFS_FIRST_FREE_OBJECTID) + ino = inode->i_ino; + return ino; +} + static inline void btrfs_i_size_write(struct inode *inode, u64 size) { i_size_write(inode, size); diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c index 41d1d7c70e29..369d5068ac7a 100644 --- a/fs/btrfs/compression.c +++ b/fs/btrfs/compression.c @@ -125,9 +125,10 @@ static int check_compressed_csum(struct inode *inode, kunmap_atomic(kaddr, KM_USER0); if (csum != *cb_sum) { - printk(KERN_INFO "btrfs csum failed ino %lu " + printk(KERN_INFO "btrfs csum failed ino %llu " "extent %llu csum %u " - "wanted %u mirror %d\n", inode->i_ino, + "wanted %u mirror %d\n", + (unsigned long long)btrfs_ino(inode), (unsigned long long)disk_start, csum, *cb_sum, cb->mirror_num); ret = -EIO; diff --git a/fs/btrfs/export.c b/fs/btrfs/export.c index ff27d7a477b2..7fa283e7d306 100644 --- a/fs/btrfs/export.c +++ b/fs/btrfs/export.c @@ -28,7 +28,7 @@ static int btrfs_encode_fh(struct dentry *dentry, u32 *fh, int *max_len, len = BTRFS_FID_SIZE_NON_CONNECTABLE; type = FILEID_BTRFS_WITHOUT_PARENT; - fid->objectid = inode->i_ino; + fid->objectid = btrfs_ino(inode); fid->root_objectid = BTRFS_I(inode)->root->objectid; fid->gen = inode->i_generation; @@ -174,13 +174,13 @@ static struct dentry *btrfs_get_parent(struct dentry *child) if (!path) return ERR_PTR(-ENOMEM); - if (dir->i_ino == BTRFS_FIRST_FREE_OBJECTID) { + if (btrfs_ino(dir) == BTRFS_FIRST_FREE_OBJECTID) { key.objectid = root->root_key.objectid; key.type = BTRFS_ROOT_BACKREF_KEY; key.offset = (u64)-1; root = root->fs_info->tree_root; } else { - key.objectid = dir->i_ino; + key.objectid = btrfs_ino(dir); key.type = BTRFS_INODE_REF_KEY; key.offset = (u64)-1; } @@ -240,6 +240,7 @@ static int btrfs_get_name(struct dentry *parent, char *name, struct btrfs_key key; int name_len; int ret; + u64 ino; if (!dir || !inode) return -EINVAL; @@ -247,19 +248,21 @@ static int btrfs_get_name(struct dentry *parent, char *name, if (!S_ISDIR(dir->i_mode)) return -EINVAL; + ino = btrfs_ino(inode); + path = btrfs_alloc_path(); if (!path) return -ENOMEM; path->leave_spinning = 1; - if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) { + if (ino == BTRFS_FIRST_FREE_OBJECTID) { key.objectid = BTRFS_I(inode)->root->root_key.objectid; key.type = BTRFS_ROOT_BACKREF_KEY; key.offset = (u64)-1; root = root->fs_info->tree_root; } else { - key.objectid = inode->i_ino; - key.offset = dir->i_ino; + key.objectid = ino; + key.offset = btrfs_ino(dir); key.type = BTRFS_INODE_REF_KEY; } @@ -268,7 +271,7 @@ static int btrfs_get_name(struct dentry *parent, char *name, btrfs_free_path(path); return ret; } else if (ret > 0) { - if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) { + if (ino == BTRFS_FIRST_FREE_OBJECTID) { path->slots[0]--; } else { btrfs_free_path(path); @@ -277,11 +280,11 @@ static int btrfs_get_name(struct dentry *parent, char *name, } leaf = path->nodes[0]; - if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) { - rref = btrfs_item_ptr(leaf, path->slots[0], + if (ino == BTRFS_FIRST_FREE_OBJECTID) { + rref = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_root_ref); - name_ptr = (unsigned long)(rref + 1); - name_len = btrfs_root_ref_name_len(leaf, rref); + name_ptr = (unsigned long)(rref + 1); + name_len = btrfs_root_ref_name_len(leaf, rref); } else { iref = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_inode_ref); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 904eae10ec65..a0e818cb0401 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -7009,8 +7009,8 @@ static noinline int get_new_locations(struct inode *reloc_inode, cur_pos = extent_key->objectid - offset; last_byte = extent_key->objectid + extent_key->offset; - ret = btrfs_lookup_file_extent(NULL, root, path, reloc_inode->i_ino, - cur_pos, 0); + ret = btrfs_lookup_file_extent(NULL, root, path, + btrfs_ino(reloc_inode), cur_pos, 0); if (ret < 0) goto out; if (ret > 0) { @@ -7033,7 +7033,7 @@ static noinline int get_new_locations(struct inode *reloc_inode, btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); if (found_key.offset != cur_pos || found_key.type != BTRFS_EXTENT_DATA_KEY || - found_key.objectid != reloc_inode->i_ino) + found_key.objectid != btrfs_ino(reloc_inode)) break; fi = btrfs_item_ptr(leaf, path->slots[0], @@ -7179,7 +7179,7 @@ next: break; } - if (inode && key.objectid != inode->i_ino) { + if (inode && key.objectid != btrfs_ino(inode)) { BUG_ON(extent_locked); btrfs_release_path(root, path); mutex_unlock(&inode->i_mutex); @@ -7488,7 +7488,7 @@ static noinline int invalidate_extent_cache(struct btrfs_root *root, continue; if (btrfs_file_extent_disk_bytenr(leaf, fi) == 0) continue; - if (!inode || inode->i_ino != key.objectid) { + if (!inode || btrfs_ino(inode) != key.objectid) { iput(inode); inode = btrfs_ilookup(target_root->fs_info->sb, key.objectid, target_root, 1); diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 5ae0bffaa4d8..41d313a0d098 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3030,7 +3030,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, * because there might be preallocation past i_size */ ret = btrfs_lookup_file_extent(NULL, BTRFS_I(inode)->root, - path, inode->i_ino, -1, 0); + path, btrfs_ino(inode), -1, 0); if (ret < 0) { btrfs_free_path(path); return ret; @@ -3043,7 +3043,7 @@ int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, found_type = btrfs_key_type(&found_key); /* No extents, but there might be delalloc bits */ - if (found_key.objectid != inode->i_ino || + if (found_key.objectid != btrfs_ino(inode) || found_type != BTRFS_EXTENT_DATA_KEY) { /* have to trust i_size as the end */ last = (u64)-1; diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index a6a9d4e8b491..1d9410e39212 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -208,8 +208,9 @@ static int __btrfs_lookup_bio_sums(struct btrfs_root *root, EXTENT_NODATASUM, GFP_NOFS); } else { printk(KERN_INFO "btrfs no csum found " - "for inode %lu start %llu\n", - inode->i_ino, + "for inode %llu start %llu\n", + (unsigned long long) + btrfs_ino(inode), (unsigned long long)offset); } item = NULL; diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 75899a01dded..bef020451525 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -298,6 +298,7 @@ int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct inode *inode, struct btrfs_path *path; struct btrfs_key key; struct btrfs_key new_key; + u64 ino = btrfs_ino(inode); u64 search_start = start; u64 disk_bytenr = 0; u64 num_bytes = 0; @@ -318,14 +319,14 @@ int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct inode *inode, while (1) { recow = 0; - ret = btrfs_lookup_file_extent(trans, root, path, inode->i_ino, + ret = btrfs_lookup_file_extent(trans, root, path, ino, search_start, -1); if (ret < 0) break; if (ret > 0 && path->slots[0] > 0 && search_start == start) { leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &key, path->slots[0] - 1); - if (key.objectid == inode->i_ino && + if (key.objectid == ino && key.type == BTRFS_EXTENT_DATA_KEY) path->slots[0]--; } @@ -346,7 +347,7 @@ next_slot: } btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); - if (key.objectid > inode->i_ino || + if (key.objectid > ino || key.type > BTRFS_EXTENT_DATA_KEY || key.offset >= end) break; @@ -592,6 +593,7 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, int del_slot = 0; int recow; int ret; + u64 ino = btrfs_ino(inode); btrfs_drop_extent_cache(inode, start, end - 1, 0); @@ -600,7 +602,7 @@ int btrfs_mark_extent_written(struct btrfs_trans_handle *trans, again: recow = 0; split = start; - key.objectid = inode->i_ino; + key.objectid = ino; key.type = BTRFS_EXTENT_DATA_KEY; key.offset = split; @@ -612,8 +614,7 @@ again: leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); - BUG_ON(key.objectid != inode->i_ino || - key.type != BTRFS_EXTENT_DATA_KEY); + BUG_ON(key.objectid != ino || key.type != BTRFS_EXTENT_DATA_KEY); fi = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_file_extent_item); BUG_ON(btrfs_file_extent_type(leaf, fi) != @@ -630,7 +631,7 @@ again: other_start = 0; other_end = start; if (extent_mergeable(leaf, path->slots[0] - 1, - inode->i_ino, bytenr, orig_offset, + ino, bytenr, orig_offset, &other_start, &other_end)) { new_key.offset = end; btrfs_set_item_key_safe(trans, root, path, &new_key); @@ -653,7 +654,7 @@ again: other_start = end; other_end = 0; if (extent_mergeable(leaf, path->slots[0] + 1, - inode->i_ino, bytenr, orig_offset, + ino, bytenr, orig_offset, &other_start, &other_end)) { fi = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_file_extent_item); @@ -702,7 +703,7 @@ again: ret = btrfs_inc_extent_ref(trans, root, bytenr, num_bytes, 0, root->root_key.objectid, - inode->i_ino, orig_offset); + ino, orig_offset); BUG_ON(ret); if (split == start) { @@ -718,7 +719,7 @@ again: other_start = end; other_end = 0; if (extent_mergeable(leaf, path->slots[0] + 1, - inode->i_ino, bytenr, orig_offset, + ino, bytenr, orig_offset, &other_start, &other_end)) { if (recow) { btrfs_release_path(root, path); @@ -729,13 +730,13 @@ again: del_nr++; ret = btrfs_free_extent(trans, root, bytenr, num_bytes, 0, root->root_key.objectid, - inode->i_ino, orig_offset); + ino, orig_offset); BUG_ON(ret); } other_start = 0; other_end = start; if (extent_mergeable(leaf, path->slots[0] - 1, - inode->i_ino, bytenr, orig_offset, + ino, bytenr, orig_offset, &other_start, &other_end)) { if (recow) { btrfs_release_path(root, path); @@ -746,7 +747,7 @@ again: del_nr++; ret = btrfs_free_extent(trans, root, bytenr, num_bytes, 0, root->root_key.objectid, - inode->i_ino, orig_offset); + ino, orig_offset); BUG_ON(ret); } if (del_nr == 0) { diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 77dd0a776c83..adec22884a3e 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -138,7 +138,7 @@ static noinline int insert_inline_extent(struct btrfs_trans_handle *trans, path->leave_spinning = 1; btrfs_set_trans_block_group(trans, inode); - key.objectid = inode->i_ino; + key.objectid = btrfs_ino(inode); key.offset = start; btrfs_set_key_type(&key, BTRFS_EXTENT_DATA_KEY); datasize = btrfs_file_extent_calc_inline_size(cur_size); @@ -1049,6 +1049,7 @@ static noinline int run_delalloc_nocow(struct inode *inode, int nocow; int check_prev = 1; bool nolock = false; + u64 ino = btrfs_ino(inode); path = btrfs_alloc_path(); BUG_ON(!path); @@ -1063,14 +1064,14 @@ static noinline int run_delalloc_nocow(struct inode *inode, cow_start = (u64)-1; cur_offset = start; while (1) { - ret = btrfs_lookup_file_extent(trans, root, path, inode->i_ino, + ret = btrfs_lookup_file_extent(trans, root, path, ino, cur_offset, 0); BUG_ON(ret < 0); if (ret > 0 && path->slots[0] > 0 && check_prev) { leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0] - 1); - if (found_key.objectid == inode->i_ino && + if (found_key.objectid == ino && found_key.type == BTRFS_EXTENT_DATA_KEY) path->slots[0]--; } @@ -1091,7 +1092,7 @@ next_slot: num_bytes = 0; btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); - if (found_key.objectid > inode->i_ino || + if (found_key.objectid > ino || found_key.type > BTRFS_EXTENT_DATA_KEY || found_key.offset > end) break; @@ -1126,7 +1127,7 @@ next_slot: goto out_check; if (btrfs_extent_readonly(root, disk_bytenr)) goto out_check; - if (btrfs_cross_ref_exist(trans, root, inode->i_ino, + if (btrfs_cross_ref_exist(trans, root, ino, found_key.offset - extent_offset, disk_bytenr)) goto out_check; @@ -1643,7 +1644,7 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, &hint, 0); BUG_ON(ret); - ins.objectid = inode->i_ino; + ins.objectid = btrfs_ino(inode); ins.offset = file_pos; ins.type = BTRFS_EXTENT_DATA_KEY; ret = btrfs_insert_empty_item(trans, root, path, &ins, sizeof(*fi)); @@ -1674,7 +1675,7 @@ static int insert_reserved_file_extent(struct btrfs_trans_handle *trans, ins.type = BTRFS_EXTENT_ITEM_KEY; ret = btrfs_alloc_reserved_file_extent(trans, root, root->root_key.objectid, - inode->i_ino, file_pos, &ins); + btrfs_ino(inode), file_pos, &ins); BUG_ON(ret); btrfs_free_path(path); @@ -2004,8 +2005,9 @@ good: zeroit: if (printk_ratelimit()) { - printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u " - "private %llu\n", page->mapping->host->i_ino, + printk(KERN_INFO "btrfs csum failed ino %llu off %llu csum %u " + "private %llu\n", + (unsigned long long)btrfs_ino(page->mapping->host), (unsigned long long)start, csum, (unsigned long long)private); } @@ -2243,7 +2245,7 @@ int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode) /* insert an orphan item to track this unlinked/truncated file */ if (insert >= 1) { - ret = btrfs_insert_orphan_item(trans, root, inode->i_ino); + ret = btrfs_insert_orphan_item(trans, root, btrfs_ino(inode)); BUG_ON(ret); } @@ -2280,7 +2282,7 @@ int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode) spin_unlock(&root->orphan_lock); if (trans && delete_item) { - ret = btrfs_del_orphan_item(trans, root, inode->i_ino); + ret = btrfs_del_orphan_item(trans, root, btrfs_ino(inode)); BUG_ON(ret); } @@ -2542,7 +2544,8 @@ static void btrfs_read_locked_inode(struct inode *inode) * try to precache a NULL acl entry for files that don't have * any xattrs or acls */ - maybe_acls = acls_after_inode_item(leaf, path->slots[0], inode->i_ino); + maybe_acls = acls_after_inode_item(leaf, path->slots[0], + btrfs_ino(inode)); if (!maybe_acls) cache_no_acl(inode); @@ -2688,6 +2691,8 @@ static int __btrfs_unlink_inode(struct btrfs_trans_handle *trans, struct btrfs_dir_item *di; struct btrfs_key key; u64 index; + u64 ino = btrfs_ino(inode); + u64 dir_ino = btrfs_ino(dir); path = btrfs_alloc_path(); if (!path) { @@ -2696,7 +2701,7 @@ static int __btrfs_unlink_inode(struct btrfs_trans_handle *trans, } path->leave_spinning = 1; - di = btrfs_lookup_dir_item(trans, root, path, dir->i_ino, + di = btrfs_lookup_dir_item(trans, root, path, dir_ino, name, name_len, -1); if (IS_ERR(di)) { ret = PTR_ERR(di); @@ -2713,17 +2718,16 @@ static int __btrfs_unlink_inode(struct btrfs_trans_handle *trans, goto err; btrfs_release_path(root, path); - ret = btrfs_del_inode_ref(trans, root, name, name_len, - inode->i_ino, - dir->i_ino, &index); + ret = btrfs_del_inode_ref(trans, root, name, name_len, ino, + dir_ino, &index); if (ret) { printk(KERN_INFO "btrfs failed to delete reference to %.*s, " - "inode %lu parent %lu\n", name_len, name, - inode->i_ino, dir->i_ino); + "inode %llu parent %llu\n", name_len, name, + (unsigned long long)ino, (unsigned long long)dir_ino); goto err; } - di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino, + di = btrfs_lookup_dir_index_item(trans, root, path, dir_ino, index, name, name_len, -1); if (IS_ERR(di)) { ret = PTR_ERR(di); @@ -2737,7 +2741,7 @@ static int __btrfs_unlink_inode(struct btrfs_trans_handle *trans, btrfs_release_path(root, path); ret = btrfs_del_inode_ref_in_log(trans, root, name, name_len, - inode, dir->i_ino); + inode, dir_ino); BUG_ON(ret != 0 && ret != -ENOENT); ret = btrfs_del_dir_entries_in_log(trans, root, name, name_len, @@ -2815,12 +2819,14 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, int check_link = 1; int err = -ENOSPC; int ret; + u64 ino = btrfs_ino(inode); + u64 dir_ino = btrfs_ino(dir); trans = btrfs_start_transaction(root, 10); if (!IS_ERR(trans) || PTR_ERR(trans) != -ENOSPC) return trans; - if (inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) + if (ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) return ERR_PTR(-ENOSPC); /* check if there is someone else holds reference */ @@ -2879,7 +2885,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, if (ret == 0 && S_ISREG(inode->i_mode)) { ret = btrfs_lookup_file_extent(trans, root, path, - inode->i_ino, (u64)-1, 0); + ino, (u64)-1, 0); if (ret < 0) { err = ret; goto out; @@ -2895,7 +2901,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, goto out; } - di = btrfs_lookup_dir_item(trans, root, path, dir->i_ino, + di = btrfs_lookup_dir_item(trans, root, path, dir_ino, dentry->d_name.name, dentry->d_name.len, 0); if (IS_ERR(di)) { err = PTR_ERR(di); @@ -2912,7 +2918,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, ref = btrfs_lookup_inode_ref(trans, root, path, dentry->d_name.name, dentry->d_name.len, - inode->i_ino, dir->i_ino, 0); + ino, dir_ino, 0); if (IS_ERR(ref)) { err = PTR_ERR(ref); goto out; @@ -2923,7 +2929,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, index = btrfs_inode_ref_index(path->nodes[0], ref); btrfs_release_path(root, path); - di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino, index, + di = btrfs_lookup_dir_index_item(trans, root, path, dir_ino, index, dentry->d_name.name, dentry->d_name.len, 0); if (IS_ERR(di)) { err = PTR_ERR(di); @@ -2998,12 +3004,13 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, struct btrfs_key key; u64 index; int ret; + u64 dir_ino = btrfs_ino(dir); path = btrfs_alloc_path(); if (!path) return -ENOMEM; - di = btrfs_lookup_dir_item(trans, root, path, dir->i_ino, + di = btrfs_lookup_dir_item(trans, root, path, dir_ino, name, name_len, -1); BUG_ON(!di || IS_ERR(di)); @@ -3016,10 +3023,10 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, ret = btrfs_del_root_ref(trans, root->fs_info->tree_root, objectid, root->root_key.objectid, - dir->i_ino, &index, name, name_len); + dir_ino, &index, name, name_len); if (ret < 0) { BUG_ON(ret != -ENOENT); - di = btrfs_search_dir_index_item(root, path, dir->i_ino, + di = btrfs_search_dir_index_item(root, path, dir_ino, name, name_len); BUG_ON(!di || IS_ERR(di)); @@ -3029,7 +3036,7 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, index = key.offset; } - di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino, + di = btrfs_lookup_dir_index_item(trans, root, path, dir_ino, index, name, name_len, -1); BUG_ON(!di || IS_ERR(di)); @@ -3058,7 +3065,7 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) unsigned long nr = 0; if (inode->i_size > BTRFS_EMPTY_DIR_SIZE || - inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) + btrfs_ino(inode) == BTRFS_FIRST_FREE_OBJECTID) return -ENOTEMPTY; trans = __unlink_start_trans(dir, dentry); @@ -3067,7 +3074,7 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) btrfs_set_trans_block_group(trans, dir); - if (unlikely(inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) { + if (unlikely(btrfs_ino(inode) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) { err = btrfs_unlink_subvol(trans, root, dir, BTRFS_I(inode)->location.objectid, dentry->d_name.name, @@ -3299,6 +3306,7 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, int encoding; int ret; int err = 0; + u64 ino = btrfs_ino(inode); BUG_ON(new_size > 0 && min_type != BTRFS_EXTENT_DATA_KEY); @@ -3309,7 +3317,7 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, BUG_ON(!path); path->reada = -1; - key.objectid = inode->i_ino; + key.objectid = ino; key.offset = (u64)-1; key.type = (u8)-1; @@ -3337,7 +3345,7 @@ search_again: found_type = btrfs_key_type(&found_key); encoding = 0; - if (found_key.objectid != inode->i_ino) + if (found_key.objectid != ino) break; if (found_type < min_type) @@ -3456,7 +3464,7 @@ delete: ret = btrfs_free_extent(trans, root, extent_start, extent_num_bytes, 0, btrfs_header_owner(leaf), - inode->i_ino, extent_offset); + ino, extent_offset); BUG_ON(ret); } @@ -3655,7 +3663,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) break; err = btrfs_insert_file_extent(trans, root, - inode->i_ino, cur_offset, 0, + btrfs_ino(inode), cur_offset, 0, 0, hole_size, 0, hole_size, 0, 0, 0); if (err) @@ -3812,7 +3820,7 @@ void btrfs_evict_inode(struct inode *inode) if (!(root == root->fs_info->tree_root || root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID)) - btrfs_return_ino(root, inode->i_ino); + btrfs_return_ino(root, btrfs_ino(inode)); nr = trans->blocks_used; btrfs_end_transaction(trans, root); @@ -3839,7 +3847,7 @@ static int btrfs_inode_by_name(struct inode *dir, struct dentry *dentry, path = btrfs_alloc_path(); BUG_ON(!path); - di = btrfs_lookup_dir_item(NULL, root, path, dir->i_ino, name, + di = btrfs_lookup_dir_item(NULL, root, path, btrfs_ino(dir), name, namelen, 0); if (IS_ERR(di)) ret = PTR_ERR(di); @@ -3892,7 +3900,7 @@ static int fixup_tree_root_location(struct btrfs_root *root, leaf = path->nodes[0]; ref = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_root_ref); - if (btrfs_root_ref_dirid(leaf, ref) != dir->i_ino || + if (btrfs_root_ref_dirid(leaf, ref) != btrfs_ino(dir) || btrfs_root_ref_name_len(leaf, ref) != dentry->d_name.len) goto out; @@ -3931,6 +3939,7 @@ static void inode_tree_add(struct inode *inode) struct btrfs_inode *entry; struct rb_node **p; struct rb_node *parent; + u64 ino = btrfs_ino(inode); again: p = &root->inode_tree.rb_node; parent = NULL; @@ -3943,9 +3952,9 @@ again: parent = *p; entry = rb_entry(parent, struct btrfs_inode, rb_node); - if (inode->i_ino < entry->vfs_inode.i_ino) + if (ino < btrfs_ino(&entry->vfs_inode)) p = &parent->rb_left; - else if (inode->i_ino > entry->vfs_inode.i_ino) + else if (ino > btrfs_ino(&entry->vfs_inode)) p = &parent->rb_right; else { WARN_ON(!(entry->vfs_inode.i_state & @@ -4009,9 +4018,9 @@ again: prev = node; entry = rb_entry(node, struct btrfs_inode, rb_node); - if (objectid < entry->vfs_inode.i_ino) + if (objectid < btrfs_ino(&entry->vfs_inode)) node = node->rb_left; - else if (objectid > entry->vfs_inode.i_ino) + else if (objectid > btrfs_ino(&entry->vfs_inode)) node = node->rb_right; else break; @@ -4019,7 +4028,7 @@ again: if (!node) { while (prev) { entry = rb_entry(prev, struct btrfs_inode, rb_node); - if (objectid <= entry->vfs_inode.i_ino) { + if (objectid <= btrfs_ino(&entry->vfs_inode)) { node = prev; break; } @@ -4028,7 +4037,7 @@ again: } while (node) { entry = rb_entry(node, struct btrfs_inode, rb_node); - objectid = entry->vfs_inode.i_ino + 1; + objectid = btrfs_ino(&entry->vfs_inode) + 1; inode = igrab(&entry->vfs_inode); if (inode) { spin_unlock(&root->inode_lock); @@ -4066,7 +4075,7 @@ static int btrfs_init_locked_inode(struct inode *inode, void *p) static int btrfs_find_actor(struct inode *inode, void *opaque) { struct btrfs_iget_args *args = opaque; - return args->ino == inode->i_ino && + return args->ino == btrfs_ino(inode) && args->root == BTRFS_I(inode)->root; } @@ -4244,9 +4253,7 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, /* special case for "." */ if (filp->f_pos == 0) { - over = filldir(dirent, ".", 1, - 1, inode->i_ino, - DT_DIR); + over = filldir(dirent, ".", 1, 1, btrfs_ino(inode), DT_DIR); if (over) return 0; filp->f_pos = 1; @@ -4265,7 +4272,7 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, btrfs_set_key_type(&key, key_type); key.offset = filp->f_pos; - key.objectid = inode->i_ino; + key.objectid = btrfs_ino(inode); ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); if (ret < 0) @@ -4420,8 +4427,9 @@ void btrfs_dirty_inode(struct inode *inode) if (IS_ERR(trans)) { if (printk_ratelimit()) { printk(KERN_ERR "btrfs: fail to " - "dirty inode %lu error %ld\n", - inode->i_ino, PTR_ERR(trans)); + "dirty inode %llu error %ld\n", + (unsigned long long)btrfs_ino(inode), + PTR_ERR(trans)); } return; } @@ -4431,8 +4439,9 @@ void btrfs_dirty_inode(struct inode *inode) if (ret) { if (printk_ratelimit()) { printk(KERN_ERR "btrfs: fail to " - "dirty inode %lu error %d\n", - inode->i_ino, ret); + "dirty inode %llu error %d\n", + (unsigned long long)btrfs_ino(inode), + ret); } } } @@ -4452,7 +4461,7 @@ static int btrfs_set_inode_index_count(struct inode *inode) struct extent_buffer *leaf; int ret; - key.objectid = inode->i_ino; + key.objectid = btrfs_ino(inode); btrfs_set_key_type(&key, BTRFS_DIR_INDEX_KEY); key.offset = (u64)-1; @@ -4484,7 +4493,7 @@ static int btrfs_set_inode_index_count(struct inode *inode) leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); - if (found_key.objectid != inode->i_ino || + if (found_key.objectid != btrfs_ino(inode) || btrfs_key_type(&found_key) != BTRFS_DIR_INDEX_KEY) { BTRFS_I(inode)->index_cnt = 2; goto out; @@ -4657,29 +4666,29 @@ int btrfs_add_link(struct btrfs_trans_handle *trans, int ret = 0; struct btrfs_key key; struct btrfs_root *root = BTRFS_I(parent_inode)->root; + u64 ino = btrfs_ino(inode); + u64 parent_ino = btrfs_ino(parent_inode); - if (unlikely(inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) { + if (unlikely(ino == BTRFS_FIRST_FREE_OBJECTID)) { memcpy(&key, &BTRFS_I(inode)->root->root_key, sizeof(key)); } else { - key.objectid = inode->i_ino; + key.objectid = ino; btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY); key.offset = 0; } - if (unlikely(inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) { + if (unlikely(ino == BTRFS_FIRST_FREE_OBJECTID)) { ret = btrfs_add_root_ref(trans, root->fs_info->tree_root, key.objectid, root->root_key.objectid, - parent_inode->i_ino, - index, name, name_len); + parent_ino, index, name, name_len); } else if (add_backref) { - ret = btrfs_insert_inode_ref(trans, root, - name, name_len, inode->i_ino, - parent_inode->i_ino, index); + ret = btrfs_insert_inode_ref(trans, root, name, name_len, ino, + parent_ino, index); } if (ret == 0) { ret = btrfs_insert_dir_item(trans, root, name, name_len, - parent_inode->i_ino, &key, + parent_ino, &key, btrfs_inode_type(inode), index); BUG_ON(ret); @@ -4738,7 +4747,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, goto out_unlock; inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, - dentry->d_name.len, dir->i_ino, objectid, + dentry->d_name.len, btrfs_ino(dir), objectid, BTRFS_I(dir)->block_group, mode, &index); err = PTR_ERR(inode); if (IS_ERR(inode)) @@ -4800,7 +4809,7 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, goto out_unlock; inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, - dentry->d_name.len, dir->i_ino, objectid, + dentry->d_name.len, btrfs_ino(dir), objectid, BTRFS_I(dir)->block_group, mode, &index); err = PTR_ERR(inode); if (IS_ERR(inode)) @@ -4928,7 +4937,7 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) goto out_fail; inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, - dentry->d_name.len, dir->i_ino, objectid, + dentry->d_name.len, btrfs_ino(dir), objectid, BTRFS_I(dir)->block_group, S_IFDIR | mode, &index); if (IS_ERR(inode)) { @@ -5049,7 +5058,7 @@ struct extent_map *btrfs_get_extent(struct inode *inode, struct page *page, u64 bytenr; u64 extent_start = 0; u64 extent_end = 0; - u64 objectid = inode->i_ino; + u64 objectid = btrfs_ino(inode); u32 found_type; struct btrfs_path *path = NULL; struct btrfs_root *root = BTRFS_I(inode)->root; @@ -5557,7 +5566,7 @@ static noinline int can_nocow_odirect(struct btrfs_trans_handle *trans, if (!path) return -ENOMEM; - ret = btrfs_lookup_file_extent(trans, root, path, inode->i_ino, + ret = btrfs_lookup_file_extent(trans, root, path, btrfs_ino(inode), offset, 0); if (ret < 0) goto out; @@ -5574,7 +5583,7 @@ static noinline int can_nocow_odirect(struct btrfs_trans_handle *trans, ret = 0; leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &key, slot); - if (key.objectid != inode->i_ino || + if (key.objectid != btrfs_ino(inode) || key.type != BTRFS_EXTENT_DATA_KEY) { /* not our file or wrong item type, must cow */ goto out; @@ -5608,7 +5617,7 @@ static noinline int can_nocow_odirect(struct btrfs_trans_handle *trans, * look for other files referencing this extent, if we * find any we must cow */ - if (btrfs_cross_ref_exist(trans, root, inode->i_ino, + if (btrfs_cross_ref_exist(trans, root, btrfs_ino(inode), key.offset - backref_offset, disk_bytenr)) goto out; @@ -5798,9 +5807,10 @@ static void btrfs_endio_direct_read(struct bio *bio, int err) flush_dcache_page(bvec->bv_page); if (csum != *private) { - printk(KERN_ERR "btrfs csum failed ino %lu off" + printk(KERN_ERR "btrfs csum failed ino %llu off" " %llu csum %u private %u\n", - inode->i_ino, (unsigned long long)start, + (unsigned long long)btrfs_ino(inode), + (unsigned long long)start, csum, *private); err = -EIO; } @@ -5947,9 +5957,9 @@ static void btrfs_end_dio_bio(struct bio *bio, int err) struct btrfs_dio_private *dip = bio->bi_private; if (err) { - printk(KERN_ERR "btrfs direct IO failed ino %lu rw %lu " + printk(KERN_ERR "btrfs direct IO failed ino %llu rw %lu " "sector %#Lx len %u err no %d\n", - dip->inode->i_ino, bio->bi_rw, + (unsigned long long)btrfs_ino(dip->inode), bio->bi_rw, (unsigned long long)bio->bi_sector, bio->bi_size, err); dip->errors = 1; @@ -6859,8 +6869,8 @@ void btrfs_destroy_inode(struct inode *inode) spin_lock(&root->orphan_lock); if (!list_empty(&BTRFS_I(inode)->i_orphan)) { - printk(KERN_INFO "BTRFS: inode %lu still on the orphan list\n", - inode->i_ino); + printk(KERN_INFO "BTRFS: inode %llu still on the orphan list\n", + (unsigned long long)btrfs_ino(inode)); list_del_init(&BTRFS_I(inode)->i_orphan); } spin_unlock(&root->orphan_lock); @@ -6999,16 +7009,17 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, u64 index = 0; u64 root_objectid; int ret; + u64 old_ino = btrfs_ino(old_inode); - if (new_dir->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) + if (btrfs_ino(new_dir) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) return -EPERM; /* we only allow rename subvolume link between subvolumes */ - if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID && root != dest) + if (old_ino != BTRFS_FIRST_FREE_OBJECTID && root != dest) return -EXDEV; - if (old_inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID || - (new_inode && new_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) + if (old_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID || + (new_inode && btrfs_ino(new_inode) == BTRFS_FIRST_FREE_OBJECTID)) return -ENOTEMPTY; if (S_ISDIR(old_inode->i_mode) && new_inode && @@ -7024,7 +7035,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, filemap_flush(old_inode->i_mapping); /* close the racy window with snapshot create/destroy ioctl */ - if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) + if (old_ino == BTRFS_FIRST_FREE_OBJECTID) down_read(&root->fs_info->subvol_sem); /* * We want to reserve the absolute worst case amount of items. So if @@ -7049,15 +7060,15 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, if (ret) goto out_fail; - if (unlikely(old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) { + if (unlikely(old_ino == BTRFS_FIRST_FREE_OBJECTID)) { /* force full log commit if subvolume involved. */ root->fs_info->last_trans_log_full_commit = trans->transid; } else { ret = btrfs_insert_inode_ref(trans, dest, new_dentry->d_name.name, new_dentry->d_name.len, - old_inode->i_ino, - new_dir->i_ino, index); + old_ino, + btrfs_ino(new_dir), index); if (ret) goto out_fail; /* @@ -7073,10 +7084,8 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, * make sure the inode gets flushed if it is replacing * something. */ - if (new_inode && new_inode->i_size && - old_inode && S_ISREG(old_inode->i_mode)) { + if (new_inode && new_inode->i_size && S_ISREG(old_inode->i_mode)) btrfs_add_ordered_operation(trans, root, old_inode); - } old_dir->i_ctime = old_dir->i_mtime = ctime; new_dir->i_ctime = new_dir->i_mtime = ctime; @@ -7085,7 +7094,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, if (old_dentry->d_parent != new_dentry->d_parent) btrfs_record_unlink_dir(trans, old_dir, old_inode, 1); - if (unlikely(old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) { + if (unlikely(old_ino == BTRFS_FIRST_FREE_OBJECTID)) { root_objectid = BTRFS_I(old_inode)->root->root_key.objectid; ret = btrfs_unlink_subvol(trans, root, old_dir, root_objectid, old_dentry->d_name.name, @@ -7102,7 +7111,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, if (new_inode) { new_inode->i_ctime = CURRENT_TIME; - if (unlikely(new_inode->i_ino == + if (unlikely(btrfs_ino(new_inode) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) { root_objectid = BTRFS_I(new_inode)->location.objectid; ret = btrfs_unlink_subvol(trans, dest, new_dir, @@ -7130,7 +7139,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, new_dentry->d_name.len, 0, index); BUG_ON(ret); - if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) { + if (old_ino != BTRFS_FIRST_FREE_OBJECTID) { struct dentry *parent = dget_parent(new_dentry); btrfs_log_new_name(trans, old_inode, old_dir, parent); dput(parent); @@ -7139,7 +7148,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, out_fail: btrfs_end_transaction_throttle(trans, root); out_notrans: - if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) + if (old_ino == BTRFS_FIRST_FREE_OBJECTID) up_read(&root->fs_info->subvol_sem); return ret; @@ -7284,7 +7293,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, goto out_unlock; inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, - dentry->d_name.len, dir->i_ino, objectid, + dentry->d_name.len, btrfs_ino(dir), objectid, BTRFS_I(dir)->block_group, S_IFLNK|S_IRWXUGO, &index); err = PTR_ERR(inode); @@ -7315,7 +7324,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, path = btrfs_alloc_path(); BUG_ON(!path); - key.objectid = inode->i_ino; + key.objectid = btrfs_ino(inode); key.offset = 0; btrfs_set_key_type(&key, BTRFS_EXTENT_DATA_KEY); datasize = btrfs_file_extent_calc_inline_size(name_len); diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index e1835f8eec93..01dccb4a70bb 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -416,7 +416,7 @@ static noinline int create_subvol(struct btrfs_root *root, BUG_ON(ret); ret = btrfs_insert_dir_item(trans, root, - name, namelen, dir->i_ino, &key, + name, namelen, btrfs_ino(dir), &key, BTRFS_FT_DIR, index); if (ret) goto fail; @@ -427,7 +427,7 @@ static noinline int create_subvol(struct btrfs_root *root, ret = btrfs_add_root_ref(trans, root->fs_info->tree_root, objectid, root->root_key.objectid, - dir->i_ino, index, name, namelen); + btrfs_ino(dir), index, name, namelen); BUG_ON(ret); @@ -1123,7 +1123,7 @@ static noinline int btrfs_ioctl_subvol_getflags(struct file *file, int ret = 0; u64 flags = 0; - if (inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) + if (btrfs_ino(inode) != BTRFS_FIRST_FREE_OBJECTID) return -EINVAL; down_read(&root->fs_info->subvol_sem); @@ -1150,7 +1150,7 @@ static noinline int btrfs_ioctl_subvol_setflags(struct file *file, if (root->fs_info->sb->s_flags & MS_RDONLY) return -EROFS; - if (inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) + if (btrfs_ino(inode) != BTRFS_FIRST_FREE_OBJECTID) return -EINVAL; if (copy_from_user(&flags, arg, sizeof(flags))) @@ -1633,7 +1633,7 @@ static noinline int btrfs_ioctl_snap_destroy(struct file *file, goto out_dput; } - if (inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) { + if (btrfs_ino(inode) != BTRFS_FIRST_FREE_OBJECTID) { err = -EINVAL; goto out_dput; } @@ -1919,7 +1919,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, } /* clone data */ - key.objectid = src->i_ino; + key.objectid = btrfs_ino(src); key.type = BTRFS_EXTENT_DATA_KEY; key.offset = 0; @@ -1946,7 +1946,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, btrfs_item_key_to_cpu(leaf, &key, slot); if (btrfs_key_type(&key) > BTRFS_EXTENT_DATA_KEY || - key.objectid != src->i_ino) + key.objectid != btrfs_ino(src)) break; if (btrfs_key_type(&key) == BTRFS_EXTENT_DATA_KEY) { @@ -1989,7 +1989,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, goto next; memcpy(&new_key, &key, sizeof(new_key)); - new_key.objectid = inode->i_ino; + new_key.objectid = btrfs_ino(inode); if (off <= key.offset) new_key.offset = key.offset + destoff - off; else @@ -2043,7 +2043,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, ret = btrfs_inc_extent_ref(trans, root, disko, diskl, 0, root->root_key.objectid, - inode->i_ino, + btrfs_ino(inode), new_key.offset - datao); BUG_ON(ret); } diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index e6cb89357256..7b75e0c8ef8d 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1410,9 +1410,9 @@ again: prev = node; entry = rb_entry(node, struct btrfs_inode, rb_node); - if (objectid < entry->vfs_inode.i_ino) + if (objectid < btrfs_ino(&entry->vfs_inode)) node = node->rb_left; - else if (objectid > entry->vfs_inode.i_ino) + else if (objectid > btrfs_ino(&entry->vfs_inode)) node = node->rb_right; else break; @@ -1420,7 +1420,7 @@ again: if (!node) { while (prev) { entry = rb_entry(prev, struct btrfs_inode, rb_node); - if (objectid <= entry->vfs_inode.i_ino) { + if (objectid <= btrfs_ino(&entry->vfs_inode)) { node = prev; break; } @@ -1435,7 +1435,7 @@ again: return inode; } - objectid = entry->vfs_inode.i_ino + 1; + objectid = btrfs_ino(&entry->vfs_inode) + 1; if (cond_resched_lock(&root->inode_lock)) goto again; @@ -1471,7 +1471,7 @@ static int get_new_location(struct inode *reloc_inode, u64 *new_bytenr, return -ENOMEM; bytenr -= BTRFS_I(reloc_inode)->index_cnt; - ret = btrfs_lookup_file_extent(NULL, root, path, reloc_inode->i_ino, + ret = btrfs_lookup_file_extent(NULL, root, path, btrfs_ino(reloc_inode), bytenr, 0); if (ret < 0) goto out; @@ -1559,11 +1559,11 @@ int replace_file_extents(struct btrfs_trans_handle *trans, if (first) { inode = find_next_inode(root, key.objectid); first = 0; - } else if (inode && inode->i_ino < key.objectid) { + } else if (inode && btrfs_ino(inode) < key.objectid) { btrfs_add_delayed_iput(inode); inode = find_next_inode(root, key.objectid); } - if (inode && inode->i_ino == key.objectid) { + if (inode && btrfs_ino(inode) == key.objectid) { end = key.offset + btrfs_file_extent_num_bytes(leaf, fi); WARN_ON(!IS_ALIGNED(key.offset, @@ -1894,6 +1894,7 @@ static int invalidate_extent_cache(struct btrfs_root *root, struct inode *inode = NULL; u64 objectid; u64 start, end; + u64 ino; objectid = min_key->objectid; while (1) { @@ -1906,17 +1907,18 @@ static int invalidate_extent_cache(struct btrfs_root *root, inode = find_next_inode(root, objectid); if (!inode) break; + ino = btrfs_ino(inode); - if (inode->i_ino > max_key->objectid) { + if (ino > max_key->objectid) { iput(inode); break; } - objectid = inode->i_ino + 1; + objectid = ino + 1; if (!S_ISREG(inode->i_mode)) continue; - if (unlikely(min_key->objectid == inode->i_ino)) { + if (unlikely(min_key->objectid == ino)) { if (min_key->type > BTRFS_EXTENT_DATA_KEY) continue; if (min_key->type < BTRFS_EXTENT_DATA_KEY) @@ -1929,7 +1931,7 @@ static int invalidate_extent_cache(struct btrfs_root *root, start = 0; } - if (unlikely(max_key->objectid == inode->i_ino)) { + if (unlikely(max_key->objectid == ino)) { if (max_key->type < BTRFS_EXTENT_DATA_KEY) continue; if (max_key->type > BTRFS_EXTENT_DATA_KEY) { diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index aef6c81e7101..f4c1184b7f1a 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -972,7 +972,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, BUG_ON(ret); ret = btrfs_insert_dir_item(trans, parent_root, dentry->d_name.name, dentry->d_name.len, - parent_inode->i_ino, &key, + btrfs_ino(parent_inode), &key, BTRFS_FT_DIR, index); BUG_ON(ret); @@ -1014,7 +1014,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, */ ret = btrfs_add_root_ref(trans, tree_root, objectid, parent_root->root_key.objectid, - parent_inode->i_ino, index, + btrfs_ino(parent_inode), index, dentry->d_name.name, dentry->d_name.len); BUG_ON(ret); dput(parent); diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index c50271ad3157..4323dc68d6cd 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -519,7 +519,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, * file. This must be done before the btrfs_drop_extents run * so we don't try to drop this extent. */ - ret = btrfs_lookup_file_extent(trans, root, path, inode->i_ino, + ret = btrfs_lookup_file_extent(trans, root, path, btrfs_ino(inode), start, 0); if (ret == 0 && @@ -832,7 +832,7 @@ again: read_extent_buffer(eb, name, (unsigned long)(ref + 1), namelen); /* if we already have a perfect match, we're done */ - if (inode_in_dir(root, path, dir->i_ino, inode->i_ino, + if (inode_in_dir(root, path, btrfs_ino(dir), btrfs_ino(inode), btrfs_inode_ref_index(eb, ref), name, namelen)) { goto out; @@ -960,8 +960,9 @@ static noinline int fixup_inode_link_count(struct btrfs_trans_handle *trans, unsigned long ptr; unsigned long ptr_end; int name_len; + u64 ino = btrfs_ino(inode); - key.objectid = inode->i_ino; + key.objectid = ino; key.type = BTRFS_INODE_REF_KEY; key.offset = (u64)-1; @@ -980,7 +981,7 @@ static noinline int fixup_inode_link_count(struct btrfs_trans_handle *trans, } btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]); - if (key.objectid != inode->i_ino || + if (key.objectid != ino || key.type != BTRFS_INODE_REF_KEY) break; ptr = btrfs_item_ptr_offset(path->nodes[0], path->slots[0]); @@ -1011,10 +1012,10 @@ static noinline int fixup_inode_link_count(struct btrfs_trans_handle *trans, if (inode->i_nlink == 0) { if (S_ISDIR(inode->i_mode)) { ret = replay_dir_deletes(trans, root, NULL, path, - inode->i_ino, 1); + ino, 1); BUG_ON(ret); } - ret = insert_orphan_item(trans, root, inode->i_ino); + ret = insert_orphan_item(trans, root, ino); BUG_ON(ret); } btrfs_free_path(path); @@ -2197,6 +2198,7 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans, int ret; int err = 0; int bytes_del = 0; + u64 dir_ino = btrfs_ino(dir); if (BTRFS_I(dir)->logged_trans < trans->transid) return 0; @@ -2212,7 +2214,7 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans, if (!path) return -ENOMEM; - di = btrfs_lookup_dir_item(trans, log, path, dir->i_ino, + di = btrfs_lookup_dir_item(trans, log, path, dir_ino, name, name_len, -1); if (IS_ERR(di)) { err = PTR_ERR(di); @@ -2224,7 +2226,7 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans, BUG_ON(ret); } btrfs_release_path(log, path); - di = btrfs_lookup_dir_index_item(trans, log, path, dir->i_ino, + di = btrfs_lookup_dir_index_item(trans, log, path, dir_ino, index, name, name_len, -1); if (IS_ERR(di)) { err = PTR_ERR(di); @@ -2242,7 +2244,7 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans, if (bytes_del) { struct btrfs_key key; - key.objectid = dir->i_ino; + key.objectid = dir_ino; key.offset = 0; key.type = BTRFS_INODE_ITEM_KEY; btrfs_release_path(log, path); @@ -2300,7 +2302,7 @@ int btrfs_del_inode_ref_in_log(struct btrfs_trans_handle *trans, log = root->log_root; mutex_lock(&BTRFS_I(inode)->log_mutex); - ret = btrfs_del_inode_ref(trans, log, name, name_len, inode->i_ino, + ret = btrfs_del_inode_ref(trans, log, name, name_len, btrfs_ino(inode), dirid, &index); mutex_unlock(&BTRFS_I(inode)->log_mutex); if (ret == -ENOSPC) { @@ -2366,13 +2368,14 @@ static noinline int log_dir_items(struct btrfs_trans_handle *trans, int nritems; u64 first_offset = min_offset; u64 last_offset = (u64)-1; + u64 ino = btrfs_ino(inode); log = root->log_root; - max_key.objectid = inode->i_ino; + max_key.objectid = ino; max_key.offset = (u64)-1; max_key.type = key_type; - min_key.objectid = inode->i_ino; + min_key.objectid = ino; min_key.type = key_type; min_key.offset = min_offset; @@ -2385,9 +2388,8 @@ static noinline int log_dir_items(struct btrfs_trans_handle *trans, * we didn't find anything from this transaction, see if there * is anything at all */ - if (ret != 0 || min_key.objectid != inode->i_ino || - min_key.type != key_type) { - min_key.objectid = inode->i_ino; + if (ret != 0 || min_key.objectid != ino || min_key.type != key_type) { + min_key.objectid = ino; min_key.type = key_type; min_key.offset = (u64)-1; btrfs_release_path(root, path); @@ -2396,7 +2398,7 @@ static noinline int log_dir_items(struct btrfs_trans_handle *trans, btrfs_release_path(root, path); return ret; } - ret = btrfs_previous_item(root, path, inode->i_ino, key_type); + ret = btrfs_previous_item(root, path, ino, key_type); /* if ret == 0 there are items for this type, * create a range to tell us the last key of this type. @@ -2414,7 +2416,7 @@ static noinline int log_dir_items(struct btrfs_trans_handle *trans, } /* go backward to find any previous key */ - ret = btrfs_previous_item(root, path, inode->i_ino, key_type); + ret = btrfs_previous_item(root, path, ino, key_type); if (ret == 0) { struct btrfs_key tmp; btrfs_item_key_to_cpu(path->nodes[0], &tmp, path->slots[0]); @@ -2449,8 +2451,7 @@ static noinline int log_dir_items(struct btrfs_trans_handle *trans, for (i = path->slots[0]; i < nritems; i++) { btrfs_item_key_to_cpu(src, &min_key, i); - if (min_key.objectid != inode->i_ino || - min_key.type != key_type) + if (min_key.objectid != ino || min_key.type != key_type) goto done; ret = overwrite_item(trans, log, dst_path, src, i, &min_key); @@ -2471,7 +2472,7 @@ static noinline int log_dir_items(struct btrfs_trans_handle *trans, goto done; } btrfs_item_key_to_cpu(path->nodes[0], &tmp, path->slots[0]); - if (tmp.objectid != inode->i_ino || tmp.type != key_type) { + if (tmp.objectid != ino || tmp.type != key_type) { last_offset = (u64)-1; goto done; } @@ -2497,8 +2498,7 @@ done: * is valid */ ret = insert_dir_log_key(trans, log, path, key_type, - inode->i_ino, first_offset, - last_offset); + ino, first_offset, last_offset); if (ret) err = ret; } @@ -2742,6 +2742,7 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans, int nritems; int ins_start_slot = 0; int ins_nr; + u64 ino = btrfs_ino(inode); log = root->log_root; @@ -2754,11 +2755,11 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans, return -ENOMEM; } - min_key.objectid = inode->i_ino; + min_key.objectid = ino; min_key.type = BTRFS_INODE_ITEM_KEY; min_key.offset = 0; - max_key.objectid = inode->i_ino; + max_key.objectid = ino; /* today the code can only do partial logging of directories */ if (!S_ISDIR(inode->i_mode)) @@ -2781,8 +2782,7 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans, if (inode_only == LOG_INODE_EXISTS) max_key_type = BTRFS_XATTR_ITEM_KEY; - ret = drop_objectid_items(trans, log, path, - inode->i_ino, max_key_type); + ret = drop_objectid_items(trans, log, path, ino, max_key_type); } else { ret = btrfs_truncate_inode_items(trans, log, inode, 0, 0); } @@ -2800,7 +2800,7 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans, break; again: /* note, ins_nr might be > 0 here, cleanup outside the loop */ - if (min_key.objectid != inode->i_ino) + if (min_key.objectid != ino) break; if (min_key.type > max_key.type) break; diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c index 07b9bc350d5d..a8af771fc60c 100644 --- a/fs/btrfs/xattr.c +++ b/fs/btrfs/xattr.c @@ -44,7 +44,7 @@ ssize_t __btrfs_getxattr(struct inode *inode, const char *name, return -ENOMEM; /* lookup the xattr by name */ - di = btrfs_lookup_xattr(NULL, root, path, inode->i_ino, name, + di = btrfs_lookup_xattr(NULL, root, path, btrfs_ino(inode), name, strlen(name), 0); if (!di) { ret = -ENODATA; @@ -103,7 +103,7 @@ static int do_setxattr(struct btrfs_trans_handle *trans, return -ENOMEM; /* first lets see if we already have this xattr */ - di = btrfs_lookup_xattr(trans, root, path, inode->i_ino, name, + di = btrfs_lookup_xattr(trans, root, path, btrfs_ino(inode), name, strlen(name), -1); if (IS_ERR(di)) { ret = PTR_ERR(di); @@ -136,7 +136,7 @@ static int do_setxattr(struct btrfs_trans_handle *trans, } /* ok we have to create a completely new xattr */ - ret = btrfs_insert_xattr_item(trans, root, path, inode->i_ino, + ret = btrfs_insert_xattr_item(trans, root, path, btrfs_ino(inode), name, name_len, value, size); BUG_ON(ret); out: @@ -190,7 +190,7 @@ ssize_t btrfs_listxattr(struct dentry *dentry, char *buffer, size_t size) * NOTE: we set key.offset = 0; because we want to start with the * first xattr that we find and walk forward */ - key.objectid = inode->i_ino; + key.objectid = btrfs_ino(inode); btrfs_set_key_type(&key, BTRFS_XATTR_ITEM_KEY); key.offset = 0; -- cgit v1.2.3 From 82d5902d9c681be37ffa9d70482907f9f0b7ec1f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 20 Apr 2011 10:33:24 +0800 Subject: Btrfs: Support reading/writing on disk free ino cache This is similar to block group caching. We dedicate a special inode in fs tree to save free ino cache. At the very first time we create/delete a file after mount, the free ino cache will be loaded from disk into memory. When the fs tree is commited, the cache will be written back to disk. To keep compatibility, we check the root generation against the generation of the special inode when loading the cache, so the loading will fail if the btrfs filesystem was mounted in an older kernel before. Signed-off-by: Li Zefan --- fs/btrfs/ctree.h | 7 ++++ fs/btrfs/disk-io.c | 1 + fs/btrfs/extent-tree.c | 3 +- fs/btrfs/free-space-cache.c | 97 ++++++++++++++++++++++++++++++++++++++++++++- fs/btrfs/free-space-cache.h | 11 +++++ fs/btrfs/inode-map.c | 87 ++++++++++++++++++++++++++++++++++++++++ fs/btrfs/inode-map.h | 2 + fs/btrfs/inode.c | 45 +++++++++++++-------- fs/btrfs/transaction.c | 2 + 9 files changed, 236 insertions(+), 19 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index c96a4e4c5566..b20082e27a9f 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -105,6 +105,12 @@ struct btrfs_ordered_sum; /* For storing free space cache */ #define BTRFS_FREE_SPACE_OBJECTID -11ULL +/* + * The inode number assigned to the special inode for sotring + * free ino cache + */ +#define BTRFS_FREE_INO_OBJECTID -12ULL + /* dummy objectid represents multiple objectids */ #define BTRFS_MULTIPLE_OBJECTIDS -255ULL @@ -1110,6 +1116,7 @@ struct btrfs_root { wait_queue_head_t cache_wait; struct btrfs_free_space_ctl *free_ino_pinned; u64 cache_progress; + struct inode *cache_inode; struct mutex log_mutex; wait_queue_head_t log_writer_wait; diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index d02683b1ee16..4f12c30a5470 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2505,6 +2505,7 @@ int btrfs_free_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root) static void free_fs_root(struct btrfs_root *root) { + iput(root->cache_inode); WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree)); if (root->anon_super.s_dev) { down_write(&root->anon_super.s_umount); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index a0e818cb0401..95ce8da63b28 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3145,7 +3145,8 @@ int btrfs_check_data_free_space(struct inode *inode, u64 bytes) /* make sure bytes are sectorsize aligned */ bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1); - if (root == root->fs_info->tree_root) { + if (root == root->fs_info->tree_root || + BTRFS_I(inode)->location.objectid == BTRFS_FREE_INO_OBJECTID) { alloc_chunk = 0; committed = 1; } diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index fcbdcef6ca28..7d8b6b643403 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -209,7 +209,8 @@ int btrfs_truncate_free_space_cache(struct btrfs_root *root, return ret; } - return btrfs_update_inode(trans, root, inode); + ret = btrfs_update_inode(trans, root, inode); + return ret; } static int readahead_cache(struct inode *inode) @@ -525,6 +526,7 @@ out: spin_lock(&block_group->lock); block_group->disk_cache_state = BTRFS_DC_CLEAR; spin_unlock(&block_group->lock); + ret = 0; printk(KERN_ERR "btrfs: failed to load free space cache " "for block group %llu\n", block_group->key.objectid); @@ -893,6 +895,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, spin_lock(&block_group->lock); block_group->disk_cache_state = BTRFS_DC_ERROR; spin_unlock(&block_group->lock); + ret = 0; printk(KERN_ERR "btrfs: failed to write free space cace " "for block group %llu\n", block_group->key.objectid); @@ -2458,3 +2461,95 @@ out: return ino; } + +struct inode *lookup_free_ino_inode(struct btrfs_root *root, + struct btrfs_path *path) +{ + struct inode *inode = NULL; + + spin_lock(&root->cache_lock); + if (root->cache_inode) + inode = igrab(root->cache_inode); + spin_unlock(&root->cache_lock); + if (inode) + return inode; + + inode = __lookup_free_space_inode(root, path, 0); + if (IS_ERR(inode)) + return inode; + + spin_lock(&root->cache_lock); + if (!root->fs_info->closing) + root->cache_inode = igrab(inode); + spin_unlock(&root->cache_lock); + + return inode; +} + +int create_free_ino_inode(struct btrfs_root *root, + struct btrfs_trans_handle *trans, + struct btrfs_path *path) +{ + return __create_free_space_inode(root, trans, path, + BTRFS_FREE_INO_OBJECTID, 0); +} + +int load_free_ino_cache(struct btrfs_fs_info *fs_info, struct btrfs_root *root) +{ + struct btrfs_free_space_ctl *ctl = root->free_ino_ctl; + struct btrfs_path *path; + struct inode *inode; + int ret = 0; + u64 root_gen = btrfs_root_generation(&root->root_item); + + /* + * If we're unmounting then just return, since this does a search on the + * normal root and not the commit root and we could deadlock. + */ + smp_mb(); + if (fs_info->closing) + return 0; + + path = btrfs_alloc_path(); + if (!path) + return 0; + + inode = lookup_free_ino_inode(root, path); + if (IS_ERR(inode)) + goto out; + + if (root_gen != BTRFS_I(inode)->generation) + goto out_put; + + ret = __load_free_space_cache(root, inode, ctl, path, 0); + + if (ret < 0) + printk(KERN_ERR "btrfs: failed to load free ino cache for " + "root %llu\n", root->root_key.objectid); +out_put: + iput(inode); +out: + btrfs_free_path(path); + return ret; +} + +int btrfs_write_out_ino_cache(struct btrfs_root *root, + struct btrfs_trans_handle *trans, + struct btrfs_path *path) +{ + struct btrfs_free_space_ctl *ctl = root->free_ino_ctl; + struct inode *inode; + int ret; + + inode = lookup_free_ino_inode(root, path); + if (IS_ERR(inode)) + return 0; + + ret = __btrfs_write_out_cache(root, inode, ctl, NULL, trans, path, 0); + if (ret < 0) + printk(KERN_ERR "btrfs: failed to write free ino cache " + "for root %llu\n", root->root_key.objectid); + + iput(inode); + return ret; +} diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h index af06e6b6ceaa..8f2613f779ed 100644 --- a/fs/btrfs/free-space-cache.h +++ b/fs/btrfs/free-space-cache.h @@ -65,6 +65,17 @@ int btrfs_write_out_cache(struct btrfs_root *root, struct btrfs_block_group_cache *block_group, struct btrfs_path *path); +struct inode *lookup_free_ino_inode(struct btrfs_root *root, + struct btrfs_path *path); +int create_free_ino_inode(struct btrfs_root *root, + struct btrfs_trans_handle *trans, + struct btrfs_path *path); +int load_free_ino_cache(struct btrfs_fs_info *fs_info, + struct btrfs_root *root); +int btrfs_write_out_ino_cache(struct btrfs_root *root, + struct btrfs_trans_handle *trans, + struct btrfs_path *path); + void btrfs_init_free_space_ctl(struct btrfs_block_group_cache *block_group); int __btrfs_add_free_space(struct btrfs_free_space_ctl *ctl, u64 bytenr, u64 size); diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c index 5be62df90c4f..7967e85c72f5 100644 --- a/fs/btrfs/inode-map.c +++ b/fs/btrfs/inode-map.c @@ -137,6 +137,7 @@ out: static void start_caching(struct btrfs_root *root) { struct task_struct *tsk; + int ret; spin_lock(&root->cache_lock); if (root->cached != BTRFS_CACHE_NO) { @@ -147,6 +148,14 @@ static void start_caching(struct btrfs_root *root) root->cached = BTRFS_CACHE_STARTED; spin_unlock(&root->cache_lock); + ret = load_free_ino_cache(root->fs_info, root); + if (ret == 1) { + spin_lock(&root->cache_lock); + root->cached = BTRFS_CACHE_FINISHED; + spin_unlock(&root->cache_lock); + return; + } + tsk = kthread_run(caching_kthread, root, "btrfs-ino-cache-%llu\n", root->root_key.objectid); BUG_ON(IS_ERR(tsk)); @@ -352,6 +361,84 @@ void btrfs_init_free_ino_ctl(struct btrfs_root *root) pinned->op = &pinned_free_ino_op; } +int btrfs_save_ino_cache(struct btrfs_root *root, + struct btrfs_trans_handle *trans) +{ + struct btrfs_free_space_ctl *ctl = root->free_ino_ctl; + struct btrfs_path *path; + struct inode *inode; + u64 alloc_hint = 0; + int ret; + int prealloc; + bool retry = false; + + path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; +again: + inode = lookup_free_ino_inode(root, path); + if (IS_ERR(inode) && PTR_ERR(inode) != -ENOENT) { + ret = PTR_ERR(inode); + goto out; + } + + if (IS_ERR(inode)) { + BUG_ON(retry); + retry = true; + + ret = create_free_ino_inode(root, trans, path); + if (ret) + goto out; + goto again; + } + + BTRFS_I(inode)->generation = 0; + ret = btrfs_update_inode(trans, root, inode); + WARN_ON(ret); + + if (i_size_read(inode) > 0) { + ret = btrfs_truncate_free_space_cache(root, trans, path, inode); + if (ret) + goto out_put; + } + + spin_lock(&root->cache_lock); + if (root->cached != BTRFS_CACHE_FINISHED) { + ret = -1; + spin_unlock(&root->cache_lock); + goto out_put; + } + spin_unlock(&root->cache_lock); + + spin_lock(&ctl->tree_lock); + prealloc = sizeof(struct btrfs_free_space) * ctl->free_extents; + prealloc = ALIGN(prealloc, PAGE_CACHE_SIZE); + prealloc += ctl->total_bitmaps * PAGE_CACHE_SIZE; + spin_unlock(&ctl->tree_lock); + + /* Just to make sure we have enough space */ + prealloc += 8 * PAGE_CACHE_SIZE; + + ret = btrfs_check_data_free_space(inode, prealloc); + if (ret) + goto out_put; + + ret = btrfs_prealloc_file_range_trans(inode, trans, 0, 0, prealloc, + prealloc, prealloc, &alloc_hint); + if (ret) + goto out_put; + btrfs_free_reserved_data_space(inode, prealloc); + +out_put: + iput(inode); +out: + if (ret == 0) + ret = btrfs_write_out_ino_cache(root, trans, path); + + btrfs_free_path(path); + return ret; +} + static int btrfs_find_highest_objectid(struct btrfs_root *root, u64 *objectid) { struct btrfs_path *path; diff --git a/fs/btrfs/inode-map.h b/fs/btrfs/inode-map.h index eb918451b492..ddb347bfee23 100644 --- a/fs/btrfs/inode-map.h +++ b/fs/btrfs/inode-map.h @@ -5,6 +5,8 @@ void btrfs_init_free_ino_ctl(struct btrfs_root *root); void btrfs_unpin_free_ino(struct btrfs_root *root); void btrfs_return_ino(struct btrfs_root *root, u64 objectid); int btrfs_find_free_ino(struct btrfs_root *root, u64 *objectid); +int btrfs_save_ino_cache(struct btrfs_root *root, + struct btrfs_trans_handle *trans); int btrfs_find_free_objectid(struct btrfs_root *root, u64 *objectid); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index adec22884a3e..b78d3ab789ca 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -745,6 +745,15 @@ static u64 get_extent_allocation_hint(struct inode *inode, u64 start, return alloc_hint; } +static inline bool is_free_space_inode(struct btrfs_root *root, + struct inode *inode) +{ + if (root == root->fs_info->tree_root || + BTRFS_I(inode)->location.objectid == BTRFS_FREE_INO_OBJECTID) + return true; + return false; +} + /* * when extent_io.c finds a delayed allocation range in the file, * the call backs end up in this code. The basic idea is to @@ -777,7 +786,7 @@ static noinline int cow_file_range(struct inode *inode, struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree; int ret = 0; - BUG_ON(root == root->fs_info->tree_root); + BUG_ON(is_free_space_inode(root, inode)); trans = btrfs_join_transaction(root, 1); BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); @@ -1048,17 +1057,18 @@ static noinline int run_delalloc_nocow(struct inode *inode, int type; int nocow; int check_prev = 1; - bool nolock = false; + bool nolock; u64 ino = btrfs_ino(inode); path = btrfs_alloc_path(); BUG_ON(!path); - if (root == root->fs_info->tree_root) { - nolock = true; + + nolock = is_free_space_inode(root, inode); + + if (nolock) trans = btrfs_join_transaction_nolock(root, 1); - } else { + else trans = btrfs_join_transaction(root, 1); - } BUG_ON(IS_ERR(trans)); cow_start = (u64)-1; @@ -1316,8 +1326,7 @@ static int btrfs_set_bit_hook(struct inode *inode, if (!(state->state & EXTENT_DELALLOC) && (*bits & EXTENT_DELALLOC)) { struct btrfs_root *root = BTRFS_I(inode)->root; u64 len = state->end + 1 - state->start; - int do_list = (root->root_key.objectid != - BTRFS_ROOT_TREE_OBJECTID); + bool do_list = !is_free_space_inode(root, inode); if (*bits & EXTENT_FIRST_DELALLOC) *bits &= ~EXTENT_FIRST_DELALLOC; @@ -1350,8 +1359,7 @@ static int btrfs_clear_bit_hook(struct inode *inode, if ((state->state & EXTENT_DELALLOC) && (*bits & EXTENT_DELALLOC)) { struct btrfs_root *root = BTRFS_I(inode)->root; u64 len = state->end + 1 - state->start; - int do_list = (root->root_key.objectid != - BTRFS_ROOT_TREE_OBJECTID); + bool do_list = !is_free_space_inode(root, inode); if (*bits & EXTENT_FIRST_DELALLOC) *bits &= ~EXTENT_FIRST_DELALLOC; @@ -1458,7 +1466,7 @@ static int btrfs_submit_bio_hook(struct inode *inode, int rw, struct bio *bio, skip_sum = BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM; - if (root == root->fs_info->tree_root) + if (is_free_space_inode(root, inode)) ret = btrfs_bio_wq_end_io(root->fs_info, bio, 2); else ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0); @@ -1701,7 +1709,7 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) struct extent_state *cached_state = NULL; int compress_type = 0; int ret; - bool nolock = false; + bool nolock; ret = btrfs_dec_test_ordered_pending(inode, &ordered_extent, start, end - start + 1); @@ -1709,7 +1717,7 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) return 0; BUG_ON(!ordered_extent); - nolock = (root == root->fs_info->tree_root); + nolock = is_free_space_inode(root, inode); if (test_bit(BTRFS_ORDERED_NOCOW, &ordered_extent->flags)) { BUG_ON(!list_empty(&ordered_extent->list)); @@ -3473,7 +3481,9 @@ delete: if (path->slots[0] == 0 || path->slots[0] != pending_del_slot) { - if (root->ref_cows) { + if (root->ref_cows && + BTRFS_I(inode)->location.objectid != + BTRFS_FREE_INO_OBJECTID) { err = -EAGAIN; goto out; } @@ -3765,7 +3775,7 @@ void btrfs_evict_inode(struct inode *inode) truncate_inode_pages(&inode->i_data, 0); if (inode->i_nlink && (btrfs_root_refs(&root->root_item) != 0 || - root == root->fs_info->tree_root)) + is_free_space_inode(root, inode))) goto no_delete; if (is_bad_inode(inode)) { @@ -4382,7 +4392,8 @@ int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc) return 0; smp_mb(); - nolock = (root->fs_info->closing && root == root->fs_info->tree_root); + if (root->fs_info->closing && is_free_space_inode(root, inode)) + nolock = true; if (wbc->sync_mode == WB_SYNC_ALL) { if (nolock) @@ -6900,7 +6911,7 @@ int btrfs_drop_inode(struct inode *inode) struct btrfs_root *root = BTRFS_I(inode)->root; if (btrfs_root_refs(&root->root_item) == 0 && - root != root->fs_info->tree_root) + !is_free_space_inode(root, inode)) return 1; else return generic_drop_inode(inode); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index f4c1184b7f1a..4d1dbcbbaf41 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -761,6 +761,8 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans, btrfs_update_reloc_root(trans, root); btrfs_orphan_commit_root(trans, root); + btrfs_save_ino_cache(root, trans); + if (root->commit_root != root->node) { mutex_lock(&root->fs_commit_mutex); switch_commit_root(root); -- cgit v1.2.3 From af986d101d141f10231ffa7e40ae397dc7356857 Mon Sep 17 00:00:00 2001 From: Peter Collingbourne Date: Sun, 24 Apr 2011 22:09:32 +0100 Subject: ACPI: EC: add another DMI check for ASUS hardware Commit 0adf3c746a73684b3f8c2821a584e1db998f61e9 introduced a regression by making the ECDT validation test for ASUS hardware more restrictive. The previous test used the dmi_name_in_vendors function which searches a number of DMI fields, while the new test checked only the BIOS vendor, which is known to not match on an ASUS F5GL laptop which requires ECDT validation. Add a rule to ec_dmi_table based on an alternative DMI pattern for ASUS hardware as found elsewhere in the kernel. Signed-off-by: Peter Collingbourne Signed-off-by: Len Brown --- drivers/acpi/ec.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index fa848c4116a8..30ca71791bf2 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -940,6 +940,9 @@ static struct dmi_system_id __initdata ec_dmi_table[] = { { ec_validate_ecdt, "ASUS hardware", { DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL}, + { + ec_validate_ecdt, "ASUS hardware", { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc.") }, NULL}, {}, }; -- cgit v1.2.3 From 68d93184352f2e723f135b0a9bad93b58f9d120b Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Fri, 8 Apr 2011 17:00:50 -0400 Subject: nfsd4: fix wrongsec handling for PUTFH + op cases When PUTFH is followed by an operation that uses the filehandle, and when the current client is using a security flavor that is inconsistent with the given filehandle, we have a choice: we can return WRONGSEC either when the current filehandle is set using the PUTFH, or when the filehandle is first used by the following operation. Follow the recommendations of RFC 5661 in making this choice. (Our current behavior prevented the client from doing security negotiation by returning WRONGSEC on PUTFH+SECINFO_NO_NAME.) Signed-off-by: J. Bruce Fields --- fs/nfsd/export.c | 6 ------ fs/nfsd/nfs4proc.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 54 insertions(+), 11 deletions(-) diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c index ad000aeb21a2..b9566e46219f 100644 --- a/fs/nfsd/export.c +++ b/fs/nfsd/export.c @@ -1354,12 +1354,6 @@ exp_pseudoroot(struct svc_rqst *rqstp, struct svc_fh *fhp) if (IS_ERR(exp)) return nfserrno(PTR_ERR(exp)); rv = fh_compose(fhp, exp, exp->ex_path.dentry, NULL); - if (rv) - goto out; - rv = check_nfsd_access(exp, rqstp); - if (rv) - fh_put(fhp); -out: exp_put(exp); return rv; } diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index 8059adae013b..ad32568a1aa7 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -403,7 +403,7 @@ nfsd4_putfh(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, cstate->current_fh.fh_handle.fh_size = putfh->pf_fhlen; memcpy(&cstate->current_fh.fh_handle.fh_base, putfh->pf_fhval, putfh->pf_fhlen); - return fh_verify(rqstp, &cstate->current_fh, 0, NFSD_MAY_NOP); + return fh_verify(rqstp, &cstate->current_fh, 0, NFSD_MAY_BYPASS_GSS); } static __be32 @@ -989,6 +989,9 @@ enum nfsd4_op_flags { ALLOWED_WITHOUT_FH = 1 << 0, /* No current filehandle required */ ALLOWED_ON_ABSENT_FS = 1 << 1, /* ops processed on absent fs */ ALLOWED_AS_FIRST_OP = 1 << 2, /* ops reqired first in compound */ + /* For rfc 5661 section 2.6.3.1.1: */ + OP_HANDLES_WRONGSEC = 1 << 3, + OP_IS_PUTFH_LIKE = 1 << 4, }; struct nfsd4_operation { @@ -1039,6 +1042,39 @@ static inline struct nfsd4_operation *OPDESC(struct nfsd4_op *op) return &nfsd4_ops[op->opnum]; } +static bool need_wrongsec_check(struct svc_rqst *rqstp) +{ + struct nfsd4_compoundres *resp = rqstp->rq_resp; + struct nfsd4_compoundargs *argp = rqstp->rq_argp; + struct nfsd4_op *this = &argp->ops[resp->opcnt - 1]; + struct nfsd4_op *next = &argp->ops[resp->opcnt]; + struct nfsd4_operation *thisd; + struct nfsd4_operation *nextd; + + thisd = OPDESC(this); + /* + * Most ops check wronsec on our own; only the putfh-like ops + * have special rules. + */ + if (!(thisd->op_flags & OP_IS_PUTFH_LIKE)) + return false; + /* + * rfc 5661 2.6.3.1.1.6: don't bother erroring out a + * put-filehandle operation if we're not going to use the + * result: + */ + if (argp->opcnt == resp->opcnt) + return false; + + nextd = OPDESC(next); + /* + * Rest of 2.6.3.1.1: certain operations will return WRONGSEC + * errors themselves as necessary; others should check for them + * now: + */ + return !(nextd->op_flags & OP_HANDLES_WRONGSEC); +} + /* * COMPOUND call. */ @@ -1134,6 +1170,9 @@ nfsd4_proc_compound(struct svc_rqst *rqstp, else BUG_ON(op->status == nfs_ok); + if (!op->status && need_wrongsec_check(rqstp)) + op->status = check_nfsd_access(cstate->current_fh.fh_export, rqstp); + encode_op: /* Only from SEQUENCE */ if (resp->cstate.status == nfserr_replay_cache) { @@ -1225,10 +1264,12 @@ static struct nfsd4_operation nfsd4_ops[] = { }, [OP_LOOKUP] = { .op_func = (nfsd4op_func)nfsd4_lookup, + .op_flags = OP_HANDLES_WRONGSEC, .op_name = "OP_LOOKUP", }, [OP_LOOKUPP] = { .op_func = (nfsd4op_func)nfsd4_lookupp, + .op_flags = OP_HANDLES_WRONGSEC, .op_name = "OP_LOOKUPP", }, [OP_NVERIFY] = { @@ -1237,6 +1278,7 @@ static struct nfsd4_operation nfsd4_ops[] = { }, [OP_OPEN] = { .op_func = (nfsd4op_func)nfsd4_open, + .op_flags = OP_HANDLES_WRONGSEC, .op_name = "OP_OPEN", }, [OP_OPEN_CONFIRM] = { @@ -1249,17 +1291,20 @@ static struct nfsd4_operation nfsd4_ops[] = { }, [OP_PUTFH] = { .op_func = (nfsd4op_func)nfsd4_putfh, - .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS, + .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS + | OP_IS_PUTFH_LIKE, .op_name = "OP_PUTFH", }, [OP_PUTPUBFH] = { .op_func = (nfsd4op_func)nfsd4_putrootfh, - .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS, + .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS + | OP_IS_PUTFH_LIKE, .op_name = "OP_PUTPUBFH", }, [OP_PUTROOTFH] = { .op_func = (nfsd4op_func)nfsd4_putrootfh, - .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS, + .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS + | OP_IS_PUTFH_LIKE, .op_name = "OP_PUTROOTFH", }, [OP_READ] = { @@ -1289,15 +1334,18 @@ static struct nfsd4_operation nfsd4_ops[] = { }, [OP_RESTOREFH] = { .op_func = (nfsd4op_func)nfsd4_restorefh, - .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS, + .op_flags = ALLOWED_WITHOUT_FH | ALLOWED_ON_ABSENT_FS + | OP_IS_PUTFH_LIKE, .op_name = "OP_RESTOREFH", }, [OP_SAVEFH] = { .op_func = (nfsd4op_func)nfsd4_savefh, + .op_flags = OP_HANDLES_WRONGSEC, .op_name = "OP_SAVEFH", }, [OP_SECINFO] = { .op_func = (nfsd4op_func)nfsd4_secinfo, + .op_flags = OP_HANDLES_WRONGSEC, .op_name = "OP_SECINFO", }, [OP_SETATTR] = { @@ -1361,6 +1409,7 @@ static struct nfsd4_operation nfsd4_ops[] = { }, [OP_SECINFO_NO_NAME] = { .op_func = (nfsd4op_func)nfsd4_secinfo_no_name, + .op_flags = OP_HANDLES_WRONGSEC, .op_name = "OP_SECINFO_NO_NAME", }, }; -- cgit v1.2.3 From ac6721a13e5b1a90728e790600f827a5e5f5da2f Mon Sep 17 00:00:00 2001 From: Mi Jinlong Date: Wed, 20 Apr 2011 17:06:25 +0800 Subject: nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly The NFS server uses nfsd_create_v3 to handle EXCLUSIVE4_1 opens, but that function is not prepared to handle them. Rename nfsd_create_v3() to do_nfsd_create(), and add handling of EXCLUSIVE4_1. Signed-off-by: Mi Jinlong Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs3proc.c | 2 +- fs/nfsd/nfs4proc.c | 4 ++-- fs/nfsd/vfs.c | 20 ++++++++++++++++---- fs/nfsd/vfs.h | 2 +- 4 files changed, 20 insertions(+), 8 deletions(-) diff --git a/fs/nfsd/nfs3proc.c b/fs/nfsd/nfs3proc.c index 2247fc91d5e9..9095f3c21df9 100644 --- a/fs/nfsd/nfs3proc.c +++ b/fs/nfsd/nfs3proc.c @@ -245,7 +245,7 @@ nfsd3_proc_create(struct svc_rqst *rqstp, struct nfsd3_createargs *argp, } /* Now create the file and set attributes */ - nfserr = nfsd_create_v3(rqstp, dirfhp, argp->name, argp->len, + nfserr = do_nfsd_create(rqstp, dirfhp, argp->name, argp->len, attr, newfhp, argp->createmode, argp->verf, NULL, NULL); diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index ad32568a1aa7..3a6dbd70b34b 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -196,9 +196,9 @@ do_open_lookup(struct svc_rqst *rqstp, struct svc_fh *current_fh, struct nfsd4_o /* * Note: create modes (UNCHECKED,GUARDED...) are the same - * in NFSv4 as in v3. + * in NFSv4 as in v3 except EXCLUSIVE4_1. */ - status = nfsd_create_v3(rqstp, current_fh, open->op_fname.data, + status = do_nfsd_create(rqstp, current_fh, open->op_fname.data, open->op_fname.len, &open->op_iattr, &resfh, open->op_createmode, (u32 *)open->op_verf.data, diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index e53313972c30..389e45ad200b 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -1337,11 +1337,18 @@ out_nfserr: } #ifdef CONFIG_NFSD_V3 + +static inline int nfsd_create_is_exclusive(int createmode) +{ + return createmode == NFS3_CREATE_EXCLUSIVE + || createmode == NFS4_CREATE_EXCLUSIVE4_1; +} + /* - * NFSv3 version of nfsd_create + * NFSv3 and NFSv4 version of nfsd_create */ __be32 -nfsd_create_v3(struct svc_rqst *rqstp, struct svc_fh *fhp, +do_nfsd_create(struct svc_rqst *rqstp, struct svc_fh *fhp, char *fname, int flen, struct iattr *iap, struct svc_fh *resfhp, int createmode, u32 *verifier, int *truncp, int *created) @@ -1386,7 +1393,7 @@ nfsd_create_v3(struct svc_rqst *rqstp, struct svc_fh *fhp, if (err) goto out; - if (createmode == NFS3_CREATE_EXCLUSIVE) { + if (nfsd_create_is_exclusive(createmode)) { /* solaris7 gets confused (bugid 4218508) if these have * the high bit set, so just clear the high bits. If this is * ever changed to use different attrs for storing the @@ -1427,6 +1434,11 @@ nfsd_create_v3(struct svc_rqst *rqstp, struct svc_fh *fhp, && dchild->d_inode->i_atime.tv_sec == v_atime && dchild->d_inode->i_size == 0 ) break; + case NFS4_CREATE_EXCLUSIVE4_1: + if ( dchild->d_inode->i_mtime.tv_sec == v_mtime + && dchild->d_inode->i_atime.tv_sec == v_atime + && dchild->d_inode->i_size == 0 ) + goto set_attr; /* fallthru */ case NFS3_CREATE_GUARDED: err = nfserr_exist; @@ -1445,7 +1457,7 @@ nfsd_create_v3(struct svc_rqst *rqstp, struct svc_fh *fhp, nfsd_check_ignore_resizing(iap); - if (createmode == NFS3_CREATE_EXCLUSIVE) { + if (nfsd_create_is_exclusive(createmode)) { /* Cram the verifier into atime/mtime */ iap->ia_valid = ATTR_MTIME|ATTR_ATIME | ATTR_MTIME_SET|ATTR_ATIME_SET; diff --git a/fs/nfsd/vfs.h b/fs/nfsd/vfs.h index 4d2509f766d4..e0bbac04d1dd 100644 --- a/fs/nfsd/vfs.h +++ b/fs/nfsd/vfs.h @@ -58,7 +58,7 @@ __be32 nfsd_create(struct svc_rqst *, struct svc_fh *, int type, dev_t rdev, struct svc_fh *res); #ifdef CONFIG_NFSD_V3 __be32 nfsd_access(struct svc_rqst *, struct svc_fh *, u32 *, u32 *); -__be32 nfsd_create_v3(struct svc_rqst *, struct svc_fh *, +__be32 do_nfsd_create(struct svc_rqst *, struct svc_fh *, char *name, int len, struct iattr *attrs, struct svc_fh *res, int createmode, u32 *verifier, int *truncp, int *created); -- cgit v1.2.3 From a62573dc353b255dbbc8520bfdcb1c8a8c1ada87 Mon Sep 17 00:00:00 2001 From: Mi Jinlong Date: Wed, 23 Mar 2011 17:57:07 +0800 Subject: nfsd41: add flag checking for create_session Teach the NFS server to reject invalid create_session flags. Also do some minor formatting adjustments. Signed-off-by: Mi Jinlong Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 3 +++ include/linux/nfs4.h | 8 +++++--- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index fbde6f79922e..6dbaa379c863 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -1515,6 +1515,9 @@ nfsd4_create_session(struct svc_rqst *rqstp, bool confirm_me = false; int status = 0; + if (cr_ses->flags & ~SESSION4_FLAG_MASK_A) + return nfserr_inval; + nfs4_lock_state(); unconf = find_unconfirmed_client(&cr_ses->clientid); conf = find_confirmed_client(&cr_ses->clientid); diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index b528f6d4b860..8937727e7039 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -570,9 +570,11 @@ struct nfs4_sessionid { }; /* Create Session Flags */ -#define SESSION4_PERSIST 0x001 -#define SESSION4_BACK_CHAN 0x002 -#define SESSION4_RDMA 0x004 +#define SESSION4_PERSIST 0x001 +#define SESSION4_BACK_CHAN 0x002 +#define SESSION4_RDMA 0x004 + +#define SESSION4_FLAG_MASK_A 0x007 enum state_protect_how4 { SP4_NONE = 0, -- cgit v1.2.3 From b7c66360dc34e64742edabf4dc410070aa883119 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Fri, 22 Apr 2011 12:45:59 -0400 Subject: nfsd v4.1 lOCKT clientid field must be ignored RFC 5661 Section 18.11.3 The clientid field of the owner MAY be set to any value by the client and MUST be ignored by the server. The reason the server MUST ignore the clientid field is that the server MUST derive the client ID from the session ID from the SEQUENCE operation of the COMPOUND request. Signed-off-by: Andy Adamson Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4xdr.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index c6766af00d98..6e7f10a89354 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -588,8 +588,6 @@ nfsd4_decode_lockt(struct nfsd4_compoundargs *argp, struct nfsd4_lockt *lockt) READ_BUF(lockt->lt_owner.len); READMEM(lockt->lt_owner.data, lockt->lt_owner.len); - if (argp->minorversion && !zero_clientid(&lockt->lt_clientid)) - return nfserr_inval; DECODE_TAIL; } -- cgit v1.2.3 From 868b89c3dc25eec03985b31ff070e8f73c818980 Mon Sep 17 00:00:00 2001 From: Mi Jinlong Date: Wed, 27 Apr 2011 09:09:58 +0800 Subject: nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence Make sure nfs server errors out if request contains more ops than channel allows. Signed-off-by: Mi Jinlong [bfields@redhat.com: use helper function] Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 6dbaa379c863..3196dc388578 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -1724,6 +1724,13 @@ static void nfsd4_sequence_check_conn(struct nfsd4_conn *new, struct nfsd4_sessi return; } +static bool nfsd4_session_too_many_ops(struct svc_rqst *rqstp, struct nfsd4_session *session) +{ + struct nfsd4_compoundargs *args = rqstp->rq_argp; + + return args->opcnt > session->se_fchannel.maxops; +} + __be32 nfsd4_sequence(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, @@ -1752,6 +1759,10 @@ nfsd4_sequence(struct svc_rqst *rqstp, if (!session) goto out; + status = nfserr_too_many_ops; + if (nfsd4_session_too_many_ops(rqstp, session)) + goto out; + status = nfserr_badslot; if (seq->slotid >= session->se_fchannel.maxreqs) goto out; -- cgit v1.2.3 From bcecf1ccc336200ee488e8eb68acdafc4b0dbd1a Mon Sep 17 00:00:00 2001 From: Mi Jinlong Date: Wed, 27 Apr 2011 09:14:30 +0800 Subject: nfsd41: error out on repeated RECLAIM_COMPLETE Servers are supposed to return nfserr_complete_already to clients that attempt to send multiple RECLAIM_COMPLETEs. Signed-off-by: Mi Jinlong Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 3196dc388578..2bb03f86a037 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -1818,6 +1818,8 @@ out: __be32 nfsd4_reclaim_complete(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, struct nfsd4_reclaim_complete *rc) { + int status = 0; + if (rc->rca_one_fs) { if (!cstate->current_fh.fh_dentry) return nfserr_nofilehandle; @@ -1827,9 +1829,14 @@ nfsd4_reclaim_complete(struct svc_rqst *rqstp, struct nfsd4_compound_state *csta */ return nfs_ok; } + nfs4_lock_state(); - if (is_client_expired(cstate->session->se_client)) { - nfs4_unlock_state(); + status = nfserr_complete_already; + if (cstate->session->se_client->cl_firststate) + goto out; + + status = nfserr_stale_clientid; + if (is_client_expired(cstate->session->se_client)) /* * The following error isn't really legal. * But we only get here if the client just explicitly @@ -1837,11 +1844,13 @@ nfsd4_reclaim_complete(struct svc_rqst *rqstp, struct nfsd4_compound_state *csta * error it gets back on an operation for the dead * client. */ - return nfserr_stale_clientid; - } + goto out; + + status = nfs_ok; nfsd4_create_clid_dir(cstate->session->se_client); +out: nfs4_unlock_state(); - return nfs_ok; + return status; } __be32 -- cgit v1.2.3 From fccb13c947de83a368e1f3c2216bbf4d8d41efa1 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Wed, 27 Apr 2011 15:47:14 -0400 Subject: NFSD: Remove setting unused variable in nfsd_vfs_read() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compiling gave me this warning: fs/nfsd/vfs.c: In function ‘nfsd_vfs_read’: fs/nfsd/vfs.c:880:16: warning: variable ‘inode’ set but not used [-Wunused-but-set-variable] I discovered that a local variable "inode" was being set towards the beginning of nfsd_vfs_read() and then ignored for the rest of the function. Signed-off-by: Bryan Schumaker Signed-off-by: J. Bruce Fields --- fs/nfsd/vfs.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 389e45ad200b..f4e056ae53e4 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -874,13 +874,11 @@ static __be32 nfsd_vfs_read(struct svc_rqst *rqstp, struct svc_fh *fhp, struct file *file, loff_t offset, struct kvec *vec, int vlen, unsigned long *count) { - struct inode *inode; mm_segment_t oldfs; __be32 err; int host_err; err = nfserr_perm; - inode = file->f_path.dentry->d_inode; if (file->f_op->splice_read && rqstp->rq_splice_ok) { struct splice_desc sd = { -- cgit v1.2.3 From 1db2b9dde3317e181f76860410cb0e7433896f28 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Wed, 27 Apr 2011 15:47:15 -0400 Subject: NFSD: Check status from nfsd4_map_bcts_dir() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compiling gave me this warning: fs/nfsd/nfs4state.c: In function ‘nfsd4_bind_conn_to_session’: fs/nfsd/nfs4state.c:1623:9: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] The local variable "status" was being set by nfsd4_map_bcts_dir() and then ignored before calling nfsd4_new_conn(). Signed-off-by: Bryan Schumaker Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 2bb03f86a037..a2ea14f40b42 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -1636,8 +1636,9 @@ __be32 nfsd4_bind_conn_to_session(struct svc_rqst *rqstp, return nfserr_badsession; status = nfsd4_map_bcts_dir(&bcts->dir); - nfsd4_new_conn(rqstp, cstate->session, bcts->dir); - return nfs_ok; + if (!status) + nfsd4_new_conn(rqstp, cstate->session, bcts->dir); + return status; } static bool nfsd4_compound_in_session(struct nfsd4_session *session, struct nfs4_sessionid *sid) -- cgit v1.2.3 From 6ce2357f1e73e0da8ebeace6ec829f48a646bb8c Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Wed, 27 Apr 2011 15:47:16 -0400 Subject: NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Compiling gave me this warning: fs/nfsd/nfs4xdr.c: In function ‘nfsd4_decode_bind_conn_to_session’: fs/nfsd/nfs4xdr.c:427:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] The local variable "dummy" wasn't being used past the READ32() macro that set it. READ_BUF() should ensure that the xdr buffer is pushed past the data read into dummy already, so nothing needs to be read in. Signed-off-by: Bryan Schumaker [bfields@redhat.com: minor comment fixup.] Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4xdr.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index 6e7f10a89354..195a91d9405b 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -424,15 +424,12 @@ nfsd4_decode_access(struct nfsd4_compoundargs *argp, struct nfsd4_access *access static __be32 nfsd4_decode_bind_conn_to_session(struct nfsd4_compoundargs *argp, struct nfsd4_bind_conn_to_session *bcts) { DECODE_HEAD; - u32 dummy; READ_BUF(NFS4_MAX_SESSIONID_LEN + 8); COPYMEM(bcts->sessionid.data, NFS4_MAX_SESSIONID_LEN); READ32(bcts->dir); - /* XXX: Perhaps Tom Tucker could help us figure out how we - * should be using ctsa_use_conn_in_rdma_mode: */ - READ32(dummy); - + /* XXX: skipping ctsa_use_conn_in_rdma_mode. Perhaps Tom Tucker + * could help us figure out we should be using it. */ DECODE_TAIL; } -- cgit v1.2.3 From 9b3aa589eaa1366200062ce1f9cc7ddca8d1d578 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Sat, 30 Apr 2011 16:57:45 +0200 Subject: dmaengine: at_hdmac: modify way to use interrupts Now we use Buffer Transfer Completed interrupts. If we want a chained buffer completed information, we setup the ATC_IEN bit in CTRLB register in the lli. This is done by set_desc_eol() function and used by memcpy/slave_sg functions. Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 4 ++-- drivers/dma/at_hdmac_regs.h | 11 ++++++++--- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 3d7d705f026f..13050e646f8e 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -464,7 +464,7 @@ static irqreturn_t at_dma_interrupt(int irq, void *dev_id) for (i = 0; i < atdma->dma_common.chancnt; i++) { atchan = &atdma->chan[i]; - if (pending & (AT_DMA_CBTC(i) | AT_DMA_ERR(i))) { + if (pending & (AT_DMA_BTC(i) | AT_DMA_ERR(i))) { if (pending & AT_DMA_ERR(i)) { /* Disable channel on AHB error */ dma_writel(atdma, CHDR, atchan->mask); @@ -549,7 +549,7 @@ atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, } ctrla = ATC_DEFAULT_CTRLA; - ctrlb = ATC_DEFAULT_CTRLB + ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN | ATC_SRC_ADDR_MODE_INCR | ATC_DST_ADDR_MODE_INCR | ATC_FC_MEM2MEM; diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index 495457e3dc4b..8303306ea825 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -309,8 +309,8 @@ static void atc_setup_irq(struct at_dma_chan *atchan, int on) struct at_dma *atdma = to_at_dma(atchan->chan_common.device); u32 ebci; - /* enable interrupts on buffer chain completion & error */ - ebci = AT_DMA_CBTC(atchan->chan_common.chan_id) + /* enable interrupts on buffer transfer completion & error */ + ebci = AT_DMA_BTC(atchan->chan_common.chan_id) | AT_DMA_ERR(atchan->chan_common.chan_id); if (on) dma_writel(atdma, EBCIER, ebci); @@ -347,7 +347,12 @@ static inline int atc_chan_is_enabled(struct at_dma_chan *atchan) */ static void set_desc_eol(struct at_desc *desc) { - desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS; + u32 ctrlb = desc->lli.ctrlb; + + ctrlb &= ~ATC_IEN; + ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS; + + desc->lli.ctrlb = ctrlb; desc->lli.dscr = 0; } -- cgit v1.2.3 From 53830cc75974a199b6b654c062ff8c54c58caa0b Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Sat, 30 Apr 2011 16:57:46 +0200 Subject: dmaengine: at_hdmac: add cyclic DMA operation support Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 231 +++++++++++++++++++++++++++++++++++++++++--- drivers/dma/at_hdmac_regs.h | 14 ++- 2 files changed, 229 insertions(+), 16 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 13050e646f8e..ed9d92429de8 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -164,6 +164,29 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc) } } +/** + * atc_desc_chain - build chain adding a descripor + * @first: address of first descripor of the chain + * @prev: address of previous descripor of the chain + * @desc: descriptor to queue + * + * Called from prep_* functions + */ +static void atc_desc_chain(struct at_desc **first, struct at_desc **prev, + struct at_desc *desc) +{ + if (!(*first)) { + *first = desc; + } else { + /* inform the HW lli about chaining */ + (*prev)->lli.dscr = desc->txd.phys; + /* insert the link descriptor to the LD ring */ + list_add_tail(&desc->desc_node, + &(*first)->tx_list); + } + *prev = desc; +} + /** * atc_assign_cookie - compute and assign new cookie * @atchan: channel we work on @@ -237,16 +260,12 @@ static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first) static void atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) { - dma_async_tx_callback callback; - void *param; struct dma_async_tx_descriptor *txd = &desc->txd; dev_vdbg(chan2dev(&atchan->chan_common), "descriptor %u complete\n", txd->cookie); atchan->completed_cookie = txd->cookie; - callback = txd->callback; - param = txd->callback_param; /* move children to free_list */ list_splice_init(&desc->tx_list, &atchan->free_list); @@ -278,12 +297,19 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) } } - /* - * The API requires that no submissions are done from a - * callback, so we don't need to drop the lock here - */ - if (callback) - callback(param); + /* for cyclic transfers, + * no need to replay callback function while stopping */ + if (!test_bit(ATC_IS_CYCLIC, &atchan->status)) { + dma_async_tx_callback callback = txd->callback; + void *param = txd->callback_param; + + /* + * The API requires that no submissions are done from a + * callback, so we don't need to drop the lock here + */ + if (callback) + callback(param); + } dma_run_dependencies(txd); } @@ -419,6 +445,26 @@ static void atc_handle_error(struct at_dma_chan *atchan) atc_chain_complete(atchan, bad_desc); } +/** + * atc_handle_cyclic - at the end of a period, run callback function + * @atchan: channel used for cyclic operations + * + * Called with atchan->lock held and bh disabled + */ +static void atc_handle_cyclic(struct at_dma_chan *atchan) +{ + struct at_desc *first = atc_first_active(atchan); + struct dma_async_tx_descriptor *txd = &first->txd; + dma_async_tx_callback callback = txd->callback; + void *param = txd->callback_param; + + dev_vdbg(chan2dev(&atchan->chan_common), + "new cyclic period llp 0x%08x\n", + channel_readl(atchan, DSCR)); + + if (callback) + callback(param); +} /*-- IRQ & Tasklet ---------------------------------------------------*/ @@ -434,8 +480,10 @@ static void atc_tasklet(unsigned long data) } spin_lock(&atchan->lock); - if (test_and_clear_bit(0, &atchan->error_status)) + if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status)) atc_handle_error(atchan); + else if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + atc_handle_cyclic(atchan); else atc_advance_work(atchan); @@ -469,7 +517,7 @@ static irqreturn_t at_dma_interrupt(int irq, void *dev_id) /* Disable channel on AHB error */ dma_writel(atdma, CHDR, atchan->mask); /* Give information to tasklet */ - set_bit(0, &atchan->error_status); + set_bit(ATC_IS_ERROR, &atchan->status); } tasklet_schedule(&atchan->tasklet); ret = IRQ_HANDLED; @@ -759,6 +807,148 @@ err_desc_get: return NULL; } +/** + * atc_dma_cyclic_check_values + * Check for too big/unaligned periods and unaligned DMA buffer + */ +static int +atc_dma_cyclic_check_values(unsigned int reg_width, dma_addr_t buf_addr, + size_t period_len, enum dma_data_direction direction) +{ + if (period_len > (ATC_BTSIZE_MAX << reg_width)) + goto err_out; + if (unlikely(period_len & ((1 << reg_width) - 1))) + goto err_out; + if (unlikely(buf_addr & ((1 << reg_width) - 1))) + goto err_out; + if (unlikely(!(direction & (DMA_TO_DEVICE | DMA_FROM_DEVICE)))) + goto err_out; + + return 0; + +err_out: + return -EINVAL; +} + +/** + * atc_dma_cyclic_fill_desc - Fill one period decriptor + */ +static int +atc_dma_cyclic_fill_desc(struct at_dma_slave *atslave, struct at_desc *desc, + unsigned int period_index, dma_addr_t buf_addr, + size_t period_len, enum dma_data_direction direction) +{ + u32 ctrla; + unsigned int reg_width = atslave->reg_width; + + /* prepare common CRTLA value */ + ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla + | ATC_DST_WIDTH(reg_width) + | ATC_SRC_WIDTH(reg_width) + | period_len >> reg_width; + + switch (direction) { + case DMA_TO_DEVICE: + desc->lli.saddr = buf_addr + (period_len * period_index); + desc->lli.daddr = atslave->tx_reg; + desc->lli.ctrla = ctrla; + desc->lli.ctrlb = ATC_DEFAULT_CTRLB + | ATC_DST_ADDR_MODE_FIXED + | ATC_SRC_ADDR_MODE_INCR + | ATC_FC_MEM2PER; + break; + + case DMA_FROM_DEVICE: + desc->lli.saddr = atslave->rx_reg; + desc->lli.daddr = buf_addr + (period_len * period_index); + desc->lli.ctrla = ctrla; + desc->lli.ctrlb = ATC_DEFAULT_CTRLB + | ATC_DST_ADDR_MODE_INCR + | ATC_SRC_ADDR_MODE_FIXED + | ATC_FC_PER2MEM; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/** + * atc_prep_dma_cyclic - prepare the cyclic DMA transfer + * @chan: the DMA channel to prepare + * @buf_addr: physical DMA address where the buffer starts + * @buf_len: total number of bytes for the entire buffer + * @period_len: number of bytes for each period + * @direction: transfer direction, to or from device + */ +static struct dma_async_tx_descriptor * +atc_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_data_direction direction) +{ + struct at_dma_chan *atchan = to_at_dma_chan(chan); + struct at_dma_slave *atslave = chan->private; + struct at_desc *first = NULL; + struct at_desc *prev = NULL; + unsigned long was_cyclic; + unsigned int periods = buf_len / period_len; + unsigned int i; + + dev_vdbg(chan2dev(chan), "prep_dma_cyclic: %s buf@0x%08x - %d (%d/%d)\n", + direction == DMA_TO_DEVICE ? "TO DEVICE" : "FROM DEVICE", + buf_addr, + periods, buf_len, period_len); + + if (unlikely(!atslave || !buf_len || !period_len)) { + dev_dbg(chan2dev(chan), "prep_dma_cyclic: length is zero!\n"); + return NULL; + } + + was_cyclic = test_and_set_bit(ATC_IS_CYCLIC, &atchan->status); + if (was_cyclic) { + dev_dbg(chan2dev(chan), "prep_dma_cyclic: channel in use!\n"); + return NULL; + } + + /* Check for too big/unaligned periods and unaligned DMA buffer */ + if (atc_dma_cyclic_check_values(atslave->reg_width, buf_addr, + period_len, direction)) + goto err_out; + + /* build cyclic linked list */ + for (i = 0; i < periods; i++) { + struct at_desc *desc; + + desc = atc_desc_get(atchan); + if (!desc) + goto err_desc_get; + + if (atc_dma_cyclic_fill_desc(atslave, desc, i, buf_addr, + period_len, direction)) + goto err_desc_get; + + atc_desc_chain(&first, &prev, desc); + } + + /* lets make a cyclic list */ + prev->lli.dscr = first->txd.phys; + + /* First descriptor of the chain embedds additional information */ + first->txd.cookie = -EBUSY; + first->len = buf_len; + + return &first->txd; + +err_desc_get: + dev_err(chan2dev(chan), "not enough descriptors available\n"); + atc_desc_put(atchan, first); +err_out: + clear_bit(ATC_IS_CYCLIC, &atchan->status); + return NULL; +} + + static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg) { @@ -793,6 +983,9 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, list_for_each_entry_safe(desc, _desc, &list, desc_node) atc_chain_complete(atchan, desc); + /* if channel dedicated to cyclic operations, free it */ + clear_bit(ATC_IS_CYCLIC, &atchan->status); + spin_unlock_bh(&atchan->lock); return 0; @@ -853,6 +1046,10 @@ static void atc_issue_pending(struct dma_chan *chan) dev_vdbg(chan2dev(chan), "issue_pending\n"); + /* Not needed for cyclic transfers */ + if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + return; + spin_lock_bh(&atchan->lock); if (!atc_chan_is_enabled(atchan)) { atc_advance_work(atchan); @@ -959,6 +1156,7 @@ static void atc_free_chan_resources(struct dma_chan *chan) } list_splice_init(&atchan->free_list, &list); atchan->descs_allocated = 0; + atchan->status = 0; dev_vdbg(chan2dev(chan), "free_chan_resources: done\n"); } @@ -1092,10 +1290,15 @@ static int __init at_dma_probe(struct platform_device *pdev) if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask)) atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy; - if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) { + if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg; + + if (dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask)) + atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic; + + if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) || + dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask)) atdma->dma_common.device_control = atc_control; - } dma_writel(atdma, EN, AT_DMA_ENABLE); diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index 8303306ea825..c79a9e07f7be 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -180,13 +180,23 @@ txd_to_at_desc(struct dma_async_tx_descriptor *txd) /*-- Channels --------------------------------------------------------*/ +/** + * atc_status - information bits stored in channel status flag + * + * Manipulated with atomic operations. + */ +enum atc_status { + ATC_IS_ERROR = 0, + ATC_IS_CYCLIC = 24, +}; + /** * struct at_dma_chan - internal representation of an Atmel HDMAC channel * @chan_common: common dmaengine channel object members * @device: parent device * @ch_regs: memory mapped register base * @mask: channel index in a mask - * @error_status: transmit error status information from irq handler + * @status: transmit status information from irq/prep* functions * to tasklet (use atomic operations) * @tasklet: bottom half to finish transaction work * @lock: serializes enqueue/dequeue operations to descriptors lists @@ -201,7 +211,7 @@ struct at_dma_chan { struct at_dma *device; void __iomem *ch_regs; u8 mask; - unsigned long error_status; + unsigned long status; struct tasklet_struct tasklet; spinlock_t lock; -- cgit v1.2.3 From cc52a10a048fc1fbe4ffba58c2f0afc79ae0f56f Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Sat, 30 Apr 2011 16:57:47 +0200 Subject: dmaengine: at_hdmac: debug information sg_len for prep_slave_sg Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index ed9d92429de8..8f50a0fb79e7 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -687,7 +687,8 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, struct scatterlist *sg; size_t total_len = 0; - dev_vdbg(chan2dev(chan), "prep_slave_sg: %s f0x%lx\n", + dev_vdbg(chan2dev(chan), "prep_slave_sg (%d): %s f0x%lx\n", + sg_len, direction == DMA_TO_DEVICE ? "TO DEVICE" : "FROM DEVICE", flags); -- cgit v1.2.3 From 2f432823ec6e693d7b934e805ce1838f41d66ce7 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Sat, 30 Apr 2011 16:57:48 +0200 Subject: dmaengine: at_hdmac: remove channel status testing in tasklet There is no need to test if channel is enabled in tasklet: - in error path, channel is disabled in interrupt routine - in normal path, this test is performed in sub functions to report a misuse of the engine. Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 8f50a0fb79e7..65bd52a84bc3 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -472,13 +472,6 @@ static void atc_tasklet(unsigned long data) { struct at_dma_chan *atchan = (struct at_dma_chan *)data; - /* Channel cannot be enabled here */ - if (atc_chan_is_enabled(atchan)) { - dev_err(chan2dev(&atchan->chan_common), - "BUG: channel enabled in tasklet\n"); - return; - } - spin_lock(&atchan->lock); if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status)) atc_handle_error(atchan); -- cgit v1.2.3 From ae14d4b5e0a4ebc4e674831cbb97b73ba66dba08 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Sat, 30 Apr 2011 16:57:49 +0200 Subject: dmaengine: at_hdmac: specialize AHB interfaces to optimize transfers DMA controller has two AHB interfaces on the SOC internal matrix. It is more efficient to specialize each interface as the access to memory can introduce latencies that are not compatible with peripheral accesses requirements. Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 26 +++++++++++++++----------- drivers/dma/at_hdmac_regs.h | 4 ++++ 2 files changed, 19 insertions(+), 11 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 65bd52a84bc3..f52c9e38d889 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -37,8 +37,8 @@ #define ATC_DEFAULT_CFG (ATC_FIFOCFG_HALFFIFO) #define ATC_DEFAULT_CTRLA (0) -#define ATC_DEFAULT_CTRLB (ATC_SIF(0) \ - |ATC_DIF(1)) +#define ATC_DEFAULT_CTRLB (ATC_SIF(AT_DMA_MEM_IF) \ + |ATC_DIF(AT_DMA_MEM_IF)) /* * Initial number of descriptors to allocate for each channel. This could @@ -693,14 +693,15 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, reg_width = atslave->reg_width; ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla; - ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN; + ctrlb = ATC_IEN; switch (direction) { case DMA_TO_DEVICE: ctrla |= ATC_DST_WIDTH(reg_width); ctrlb |= ATC_DST_ADDR_MODE_FIXED | ATC_SRC_ADDR_MODE_INCR - | ATC_FC_MEM2PER; + | ATC_FC_MEM2PER + | ATC_SIF(AT_DMA_MEM_IF) | ATC_DIF(AT_DMA_PER_IF); reg = atslave->tx_reg; for_each_sg(sgl, sg, sg_len, i) { struct at_desc *desc; @@ -741,7 +742,8 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, ctrla |= ATC_SRC_WIDTH(reg_width); ctrlb |= ATC_DST_ADDR_MODE_INCR | ATC_SRC_ADDR_MODE_FIXED - | ATC_FC_PER2MEM; + | ATC_FC_PER2MEM + | ATC_SIF(AT_DMA_PER_IF) | ATC_DIF(AT_DMA_MEM_IF); reg = atslave->rx_reg; for_each_sg(sgl, sg, sg_len, i) { @@ -846,20 +848,22 @@ atc_dma_cyclic_fill_desc(struct at_dma_slave *atslave, struct at_desc *desc, desc->lli.saddr = buf_addr + (period_len * period_index); desc->lli.daddr = atslave->tx_reg; desc->lli.ctrla = ctrla; - desc->lli.ctrlb = ATC_DEFAULT_CTRLB - | ATC_DST_ADDR_MODE_FIXED + desc->lli.ctrlb = ATC_DST_ADDR_MODE_FIXED | ATC_SRC_ADDR_MODE_INCR - | ATC_FC_MEM2PER; + | ATC_FC_MEM2PER + | ATC_SIF(AT_DMA_MEM_IF) + | ATC_DIF(AT_DMA_PER_IF); break; case DMA_FROM_DEVICE: desc->lli.saddr = atslave->rx_reg; desc->lli.daddr = buf_addr + (period_len * period_index); desc->lli.ctrla = ctrla; - desc->lli.ctrlb = ATC_DEFAULT_CTRLB - | ATC_DST_ADDR_MODE_INCR + desc->lli.ctrlb = ATC_DST_ADDR_MODE_INCR | ATC_SRC_ADDR_MODE_FIXED - | ATC_FC_PER2MEM; + | ATC_FC_PER2MEM + | ATC_SIF(AT_DMA_PER_IF) + | ATC_DIF(AT_DMA_MEM_IF); break; default: diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index c79a9e07f7be..ae3056df4f4b 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -103,6 +103,10 @@ /* Bitfields in CTRLB */ #define ATC_SIF(i) (0x3 & (i)) /* Src tx done via AHB-Lite Interface i */ #define ATC_DIF(i) ((0x3 & (i)) << 4) /* Dst tx done via AHB-Lite Interface i */ + /* Specify AHB interfaces */ +#define AT_DMA_MEM_IF 0 /* interface 0 as memory interface */ +#define AT_DMA_PER_IF 1 /* interface 1 as peripheral interface */ + #define ATC_SRC_PIP (0x1 << 8) /* Source Picture-in-Picture enabled */ #define ATC_DST_PIP (0x1 << 12) /* Destination Picture-in-Picture enabled */ #define ATC_SRC_DSCR_DIS (0x1 << 16) /* Src Descriptor fetch disable */ -- cgit v1.2.3 From 306e16ce13c0f3d4fc071b45803b5b83c2606011 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Tue, 19 Apr 2011 14:29:38 +0200 Subject: btrfs: rename variables clashing with global function names reported by gcc -Wshadow: page_index, page_offset, new_inode, dev_name Signed-off-by: David Sterba --- fs/btrfs/compression.c | 42 +++++++++++++++++++++--------------------- fs/btrfs/compression.h | 2 +- fs/btrfs/ctree.h | 2 +- fs/btrfs/disk-io.c | 2 +- fs/btrfs/extent_io.c | 28 ++++++++++++++-------------- fs/btrfs/extent_io.h | 2 +- fs/btrfs/inode.c | 24 ++++++++++++------------ fs/btrfs/super.c | 4 ++-- 8 files changed, 53 insertions(+), 53 deletions(-) diff --git a/fs/btrfs/compression.c b/fs/btrfs/compression.c index 41d1d7c70e29..d4cd0f0cd695 100644 --- a/fs/btrfs/compression.c +++ b/fs/btrfs/compression.c @@ -332,7 +332,7 @@ int btrfs_submit_compressed_write(struct inode *inode, u64 start, struct compressed_bio *cb; unsigned long bytes_left; struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; - int page_index = 0; + int pg_index = 0; struct page *page; u64 first_byte = disk_start; struct block_device *bdev; @@ -366,8 +366,8 @@ int btrfs_submit_compressed_write(struct inode *inode, u64 start, /* create and submit bios for the compressed pages */ bytes_left = compressed_len; - for (page_index = 0; page_index < cb->nr_pages; page_index++) { - page = compressed_pages[page_index]; + for (pg_index = 0; pg_index < cb->nr_pages; pg_index++) { + page = compressed_pages[pg_index]; page->mapping = inode->i_mapping; if (bio->bi_size) ret = io_tree->ops->merge_bio_hook(page, 0, @@ -432,7 +432,7 @@ static noinline int add_ra_bio_pages(struct inode *inode, struct compressed_bio *cb) { unsigned long end_index; - unsigned long page_index; + unsigned long pg_index; u64 last_offset; u64 isize = i_size_read(inode); int ret; @@ -456,13 +456,13 @@ static noinline int add_ra_bio_pages(struct inode *inode, end_index = (i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT; while (last_offset < compressed_end) { - page_index = last_offset >> PAGE_CACHE_SHIFT; + pg_index = last_offset >> PAGE_CACHE_SHIFT; - if (page_index > end_index) + if (pg_index > end_index) break; rcu_read_lock(); - page = radix_tree_lookup(&mapping->page_tree, page_index); + page = radix_tree_lookup(&mapping->page_tree, pg_index); rcu_read_unlock(); if (page) { misses++; @@ -476,7 +476,7 @@ static noinline int add_ra_bio_pages(struct inode *inode, if (!page) break; - if (add_to_page_cache_lru(page, mapping, page_index, + if (add_to_page_cache_lru(page, mapping, pg_index, GFP_NOFS)) { page_cache_release(page); goto next; @@ -560,7 +560,7 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio, unsigned long uncompressed_len = bio->bi_vcnt * PAGE_CACHE_SIZE; unsigned long compressed_len; unsigned long nr_pages; - unsigned long page_index; + unsigned long pg_index; struct page *page; struct block_device *bdev; struct bio *comp_bio; @@ -613,10 +613,10 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio, bdev = BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev; - for (page_index = 0; page_index < nr_pages; page_index++) { - cb->compressed_pages[page_index] = alloc_page(GFP_NOFS | + for (pg_index = 0; pg_index < nr_pages; pg_index++) { + cb->compressed_pages[pg_index] = alloc_page(GFP_NOFS | __GFP_HIGHMEM); - if (!cb->compressed_pages[page_index]) + if (!cb->compressed_pages[pg_index]) goto fail2; } cb->nr_pages = nr_pages; @@ -634,8 +634,8 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio, comp_bio->bi_end_io = end_compressed_bio_read; atomic_inc(&cb->pending_bios); - for (page_index = 0; page_index < nr_pages; page_index++) { - page = cb->compressed_pages[page_index]; + for (pg_index = 0; pg_index < nr_pages; pg_index++) { + page = cb->compressed_pages[pg_index]; page->mapping = inode->i_mapping; page->index = em_start >> PAGE_CACHE_SHIFT; @@ -702,8 +702,8 @@ int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio, return 0; fail2: - for (page_index = 0; page_index < nr_pages; page_index++) - free_page((unsigned long)cb->compressed_pages[page_index]); + for (pg_index = 0; pg_index < nr_pages; pg_index++) + free_page((unsigned long)cb->compressed_pages[pg_index]); kfree(cb->compressed_pages); fail1: @@ -945,7 +945,7 @@ void btrfs_exit_compress(void) int btrfs_decompress_buf2page(char *buf, unsigned long buf_start, unsigned long total_out, u64 disk_start, struct bio_vec *bvec, int vcnt, - unsigned long *page_index, + unsigned long *pg_index, unsigned long *pg_offset) { unsigned long buf_offset; @@ -954,7 +954,7 @@ int btrfs_decompress_buf2page(char *buf, unsigned long buf_start, unsigned long working_bytes = total_out - buf_start; unsigned long bytes; char *kaddr; - struct page *page_out = bvec[*page_index].bv_page; + struct page *page_out = bvec[*pg_index].bv_page; /* * start byte is the first byte of the page we're currently @@ -995,11 +995,11 @@ int btrfs_decompress_buf2page(char *buf, unsigned long buf_start, /* check if we need to pick another page */ if (*pg_offset == PAGE_CACHE_SIZE) { - (*page_index)++; - if (*page_index >= vcnt) + (*pg_index)++; + if (*pg_index >= vcnt) return 0; - page_out = bvec[*page_index].bv_page; + page_out = bvec[*pg_index].bv_page; *pg_offset = 0; start_byte = page_offset(page_out) - disk_start; diff --git a/fs/btrfs/compression.h b/fs/btrfs/compression.h index 51000174b9d7..a12059f4f0fd 100644 --- a/fs/btrfs/compression.h +++ b/fs/btrfs/compression.h @@ -37,7 +37,7 @@ int btrfs_decompress(int type, unsigned char *data_in, struct page *dest_page, int btrfs_decompress_buf2page(char *buf, unsigned long buf_start, unsigned long total_out, u64 disk_start, struct bio_vec *bvec, int vcnt, - unsigned long *page_index, + unsigned long *pg_index, unsigned long *pg_offset); int btrfs_submit_compressed_write(struct inode *inode, u64 start, diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8f4b81de3ae2..b5433bbe7516 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2534,7 +2534,7 @@ struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location, int btrfs_commit_write(struct file *file, struct page *page, unsigned from, unsigned to); struct extent_map *btrfs_get_extent(struct inode *inode, struct page *page, - size_t page_offset, u64 start, u64 end, + size_t pg_offset, u64 start, u64 end, int create); int btrfs_update_inode(struct btrfs_trans_handle *trans, struct btrfs_root *root, diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 228cf36ece83..990afa8656a2 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -137,7 +137,7 @@ static const char *btrfs_eb_name[BTRFS_MAX_LEVEL + 1] = { * that covers the entire device */ static struct extent_map *btree_get_extent(struct inode *inode, - struct page *page, size_t page_offset, u64 start, u64 len, + struct page *page, size_t pg_offset, u64 start, u64 len, int create) { struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index ba41da59e31b..b730c12fa958 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2007,7 +2007,7 @@ static int __extent_read_full_page(struct extent_io_tree *tree, struct btrfs_ordered_extent *ordered; int ret; int nr = 0; - size_t page_offset = 0; + size_t pg_offset = 0; size_t iosize; size_t disk_io_size; size_t blocksize = inode->i_sb->s_blocksize; @@ -2043,9 +2043,9 @@ static int __extent_read_full_page(struct extent_io_tree *tree, char *userpage; struct extent_state *cached = NULL; - iosize = PAGE_CACHE_SIZE - page_offset; + iosize = PAGE_CACHE_SIZE - pg_offset; userpage = kmap_atomic(page, KM_USER0); - memset(userpage + page_offset, 0, iosize); + memset(userpage + pg_offset, 0, iosize); flush_dcache_page(page); kunmap_atomic(userpage, KM_USER0); set_extent_uptodate(tree, cur, cur + iosize - 1, @@ -2054,7 +2054,7 @@ static int __extent_read_full_page(struct extent_io_tree *tree, &cached, GFP_NOFS); break; } - em = get_extent(inode, page, page_offset, cur, + em = get_extent(inode, page, pg_offset, cur, end - cur + 1, 0); if (IS_ERR(em) || !em) { SetPageError(page); @@ -2094,7 +2094,7 @@ static int __extent_read_full_page(struct extent_io_tree *tree, struct extent_state *cached = NULL; userpage = kmap_atomic(page, KM_USER0); - memset(userpage + page_offset, 0, iosize); + memset(userpage + pg_offset, 0, iosize); flush_dcache_page(page); kunmap_atomic(userpage, KM_USER0); @@ -2103,7 +2103,7 @@ static int __extent_read_full_page(struct extent_io_tree *tree, unlock_extent_cached(tree, cur, cur + iosize - 1, &cached, GFP_NOFS); cur = cur + iosize; - page_offset += iosize; + pg_offset += iosize; continue; } /* the get_extent function already copied into the page */ @@ -2112,7 +2112,7 @@ static int __extent_read_full_page(struct extent_io_tree *tree, check_page_uptodate(tree, page); unlock_extent(tree, cur, cur + iosize - 1, GFP_NOFS); cur = cur + iosize; - page_offset += iosize; + pg_offset += iosize; continue; } /* we have an inline extent but it didn't get marked up @@ -2122,7 +2122,7 @@ static int __extent_read_full_page(struct extent_io_tree *tree, SetPageError(page); unlock_extent(tree, cur, cur + iosize - 1, GFP_NOFS); cur = cur + iosize; - page_offset += iosize; + pg_offset += iosize; continue; } @@ -2135,7 +2135,7 @@ static int __extent_read_full_page(struct extent_io_tree *tree, unsigned long pnr = (last_byte >> PAGE_CACHE_SHIFT) + 1; pnr -= page->index; ret = submit_extent_page(READ, tree, page, - sector, disk_io_size, page_offset, + sector, disk_io_size, pg_offset, bdev, bio, pnr, end_bio_extent_readpage, mirror_num, *bio_flags, @@ -2146,7 +2146,7 @@ static int __extent_read_full_page(struct extent_io_tree *tree, if (ret) SetPageError(page); cur = cur + iosize; - page_offset += iosize; + pg_offset += iosize; } if (!nr) { if (!PageError(page)) @@ -2751,7 +2751,7 @@ int extent_prepare_write(struct extent_io_tree *tree, u64 cur_end; struct extent_map *em; unsigned blocksize = 1 << inode->i_blkbits; - size_t page_offset = 0; + size_t pg_offset = 0; size_t block_off_start; size_t block_off_end; int err = 0; @@ -2767,7 +2767,7 @@ int extent_prepare_write(struct extent_io_tree *tree, lock_extent(tree, page_start, page_end, GFP_NOFS); while (block_start <= block_end) { - em = get_extent(inode, page, page_offset, block_start, + em = get_extent(inode, page, pg_offset, block_start, block_end - block_start + 1, 1); if (IS_ERR(em) || !em) goto err; @@ -2811,7 +2811,7 @@ int extent_prepare_write(struct extent_io_tree *tree, block_start + iosize - 1, EXTENT_LOCKED, 0, NULL, NULL, GFP_NOFS); ret = submit_extent_page(READ, tree, page, - sector, iosize, page_offset, em->bdev, + sector, iosize, pg_offset, em->bdev, NULL, 1, end_bio_extent_preparewrite, 0, 0, 0); @@ -2828,7 +2828,7 @@ int extent_prepare_write(struct extent_io_tree *tree, &cached, GFP_NOFS); block_start = cur_end + 1; } - page_offset = block_start & (PAGE_CACHE_SIZE - 1); + pg_offset = block_start & (PAGE_CACHE_SIZE - 1); free_extent_map(em); } if (iocount) { diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index af2d7179c372..b9ce2f720742 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -164,7 +164,7 @@ static inline struct extent_state *extent_state_next(struct extent_state *state) typedef struct extent_map *(get_extent_t)(struct inode *inode, struct page *page, - size_t page_offset, + size_t pg_offset, u64 start, u64 len, int create); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 7cd8ab0ef04d..fc966472e3ad 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6985,7 +6985,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, struct btrfs_trans_handle *trans; struct btrfs_root *root = BTRFS_I(old_dir)->root; struct btrfs_root *dest = BTRFS_I(new_dir)->root; - struct inode *new_inode = new_dentry->d_inode; + struct inode *newinode = new_dentry->d_inode; struct inode *old_inode = old_dentry->d_inode; struct timespec ctime = CURRENT_TIME; u64 index = 0; @@ -7000,18 +7000,18 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, return -EXDEV; if (old_inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID || - (new_inode && new_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) + (newinode && newinode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) return -ENOTEMPTY; - if (S_ISDIR(old_inode->i_mode) && new_inode && - new_inode->i_size > BTRFS_EMPTY_DIR_SIZE) + if (S_ISDIR(old_inode->i_mode) && newinode && + newinode->i_size > BTRFS_EMPTY_DIR_SIZE) return -ENOTEMPTY; /* * we're using rename to replace one file with another. * and the replacement file is large. Start IO on it now so * we don't add too much work to the end of the transaction */ - if (new_inode && S_ISREG(old_inode->i_mode) && new_inode->i_size && + if (newinode && S_ISREG(old_inode->i_mode) && newinode->i_size && old_inode->i_size > BTRFS_ORDERED_OPERATIONS_FLUSH_LIMIT) filemap_flush(old_inode->i_mapping); @@ -7065,7 +7065,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, * make sure the inode gets flushed if it is replacing * something. */ - if (new_inode && new_inode->i_size && + if (newinode && newinode->i_size && old_inode && S_ISREG(old_inode->i_mode)) { btrfs_add_ordered_operation(trans, root, old_inode); } @@ -7092,16 +7092,16 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, } BUG_ON(ret); - if (new_inode) { - new_inode->i_ctime = CURRENT_TIME; - if (unlikely(new_inode->i_ino == + if (newinode) { + newinode->i_ctime = CURRENT_TIME; + if (unlikely(newinode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) { - root_objectid = BTRFS_I(new_inode)->location.objectid; + root_objectid = BTRFS_I(newinode)->location.objectid; ret = btrfs_unlink_subvol(trans, dest, new_dir, root_objectid, new_dentry->d_name.name, new_dentry->d_name.len); - BUG_ON(new_inode->i_nlink == 0); + BUG_ON(newinode->i_nlink == 0); } else { ret = btrfs_unlink_inode(trans, dest, new_dir, new_dentry->d_inode, @@ -7109,7 +7109,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, new_dentry->d_name.len); } BUG_ON(ret); - if (new_inode->i_nlink == 0) { + if (newinode->i_nlink == 0) { ret = btrfs_orphan_add(trans, new_dentry->d_inode); BUG_ON(ret); } diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 0ac712efcdf2..3e28521643fb 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -739,7 +739,7 @@ static int btrfs_set_super(struct super_block *s, void *data) * for multiple device setup. Make sure to keep it in sync. */ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, - const char *dev_name, void *data) + const char *device_name, void *data) { struct block_device *bdev = NULL; struct super_block *s; @@ -762,7 +762,7 @@ static struct dentry *btrfs_mount(struct file_system_type *fs_type, int flags, if (error) return ERR_PTR(error); - error = btrfs_scan_one_device(dev_name, mode, fs_type, &fs_devices); + error = btrfs_scan_one_device(device_name, mode, fs_type, &fs_devices); if (error) goto error_free_subvol_name; -- cgit v1.2.3 From edc95aec57661c8e568e18f6c3f002aefa07ebc8 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Tue, 19 Apr 2011 14:31:08 +0200 Subject: btrfs: remove nested duplicate variable declarations Signed-off-by: David Sterba --- fs/btrfs/ctree.c | 1 - fs/btrfs/free-space-cache.c | 3 --- 2 files changed, 4 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 84d7ca1fe0ba..c60197b36bc8 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -3647,7 +3647,6 @@ setup_items_for_insert(struct btrfs_trans_handle *trans, ret = 0; if (slot == 0) { - struct btrfs_disk_key disk_key; btrfs_cpu_key_to_disk(&disk_key, cpu_key); ret = fixup_low_keys(trans, root, path, &disk_key, 1); } diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 63731a1fb0a1..9e69c6b8409c 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1910,8 +1910,6 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group, while(1) { if (entry->bytes < bytes || (!entry->bitmap && entry->offset < min_start)) { - struct rb_node *node; - node = rb_next(&entry->offset_index); if (!node) break; @@ -1925,7 +1923,6 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group, cluster, entry, bytes, min_start); if (ret == 0) { - struct rb_node *node; node = rb_next(&entry->offset_index); if (!node) break; -- cgit v1.2.3 From 4891aca2dac612a2f21a3278d9906ade13b55788 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Tue, 19 Apr 2011 16:45:00 +0200 Subject: btrfs: fix dereference before check The superblock's ->s_fs_info is properly set in btrfs_fill_super, after a call to open_ctree, which derefereces it before check. Although tree_root is set via btrfs_set_super, let's be defensive and leave the check in place. Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 990afa8656a2..25e4b8f1d0ef 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1611,7 +1611,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS); struct btrfs_root *tree_root = btrfs_sb(sb); - struct btrfs_fs_info *fs_info = tree_root->fs_info; + struct btrfs_fs_info *fs_info = NULL; struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS); struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root), @@ -1623,11 +1623,12 @@ struct btrfs_root *open_ctree(struct super_block *sb, struct btrfs_super_block *disk_super; - if (!extent_root || !tree_root || !fs_info || + if (!extent_root || !tree_root || !tree_root->fs_info || !chunk_root || !dev_root || !csum_root) { err = -ENOMEM; goto fail; } + fs_info = tree_root->fs_info; ret = init_srcu_struct(&fs_info->subvol_srcu); if (ret) { -- cgit v1.2.3 From c704005d886cf0bc9bc3974eb009b22fe0da32c7 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Tue, 19 Apr 2011 18:00:01 +0200 Subject: btrfs: unify checking of IS_ERR and null use IS_ERR_OR_NULL when possible, done by this coccinelle script: @ match @ identifier id; @@ ( - BUG_ON(IS_ERR(id) || !id); + BUG_ON(IS_ERR_OR_NULL(id)); | - IS_ERR(id) || !id + IS_ERR_OR_NULL(id) | - !id || IS_ERR(id) + IS_ERR_OR_NULL(id) ) Signed-off-by: David Sterba --- fs/btrfs/acl.c | 2 +- fs/btrfs/extent_io.c | 12 ++++++------ fs/btrfs/file.c | 2 +- fs/btrfs/inode.c | 12 ++++++------ fs/btrfs/relocation.c | 2 +- fs/btrfs/tree-log.c | 4 ++-- 6 files changed, 17 insertions(+), 17 deletions(-) diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c index 5d505aaa72fb..1a21c99a91b8 100644 --- a/fs/btrfs/acl.c +++ b/fs/btrfs/acl.c @@ -287,7 +287,7 @@ int btrfs_acl_chmod(struct inode *inode) return 0; acl = btrfs_get_acl(inode, ACL_TYPE_ACCESS); - if (IS_ERR(acl) || !acl) + if (IS_ERR_OR_NULL(acl)) return PTR_ERR(acl); clone = posix_acl_clone(acl, GFP_KERNEL); diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index b730c12fa958..3c92712e9763 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2056,7 +2056,7 @@ static int __extent_read_full_page(struct extent_io_tree *tree, } em = get_extent(inode, page, pg_offset, cur, end - cur + 1, 0); - if (IS_ERR(em) || !em) { + if (IS_ERR_OR_NULL(em)) { SetPageError(page); unlock_extent(tree, cur, end, GFP_NOFS); break; @@ -2341,7 +2341,7 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc, } em = epd->get_extent(inode, page, pg_offset, cur, end - cur + 1, 1); - if (IS_ERR(em) || !em) { + if (IS_ERR_OR_NULL(em)) { SetPageError(page); break; } @@ -2769,7 +2769,7 @@ int extent_prepare_write(struct extent_io_tree *tree, while (block_start <= block_end) { em = get_extent(inode, page, pg_offset, block_start, block_end - block_start + 1, 1); - if (IS_ERR(em) || !em) + if (IS_ERR_OR_NULL(em)) goto err; cur_end = min(block_end, extent_map_end(em) - 1); @@ -2899,7 +2899,7 @@ int try_release_extent_mapping(struct extent_map_tree *map, len = end - start + 1; write_lock(&map->lock); em = lookup_extent_mapping(map, start, len); - if (!em || IS_ERR(em)) { + if (IS_ERR_OR_NULL(em)) { write_unlock(&map->lock); break; } @@ -2942,7 +2942,7 @@ sector_t extent_bmap(struct address_space *mapping, sector_t iblock, em = get_extent(inode, NULL, 0, start, blksize, 0); unlock_extent_cached(&BTRFS_I(inode)->io_tree, start, start + blksize - 1, &cached_state, GFP_NOFS); - if (!em || IS_ERR(em)) + if (IS_ERR_OR_NULL(em)) return 0; if (em->block_start > EXTENT_MAP_LAST_BYTE) @@ -2976,7 +2976,7 @@ static struct extent_map *get_extent_skip_holes(struct inode *inode, break; len = (len + sectorsize - 1) & ~(sectorsize - 1); em = get_extent(inode, NULL, 0, offset, len, 0); - if (!em || IS_ERR(em)) + if (IS_ERR_OR_NULL(em)) return em; /* if this isn't a hole return it */ diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 75899a01dded..83abd274370b 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1375,7 +1375,7 @@ static long btrfs_fallocate(struct file *file, int mode, while (1) { em = btrfs_get_extent(inode, NULL, 0, cur_offset, alloc_end - cur_offset, 0); - BUG_ON(IS_ERR(em) || !em); + BUG_ON(IS_ERR_OR_NULL(em)); last_byte = min(extent_map_end(em), alloc_end); last_byte = (last_byte + mask) & ~mask; if (em->block_start == EXTENT_MAP_HOLE || diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index fc966472e3ad..ba760c3ced28 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1855,7 +1855,7 @@ static int btrfs_io_failed_hook(struct bio *failed_bio, } read_unlock(&em_tree->lock); - if (!em || IS_ERR(em)) { + if (IS_ERR_OR_NULL(em)) { kfree(failrec); return -EIO; } @@ -3006,7 +3006,7 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, di = btrfs_lookup_dir_item(trans, root, path, dir->i_ino, name, name_len, -1); - BUG_ON(!di || IS_ERR(di)); + BUG_ON(IS_ERR_OR_NULL(di)); leaf = path->nodes[0]; btrfs_dir_item_key_to_cpu(leaf, di, &key); @@ -3022,7 +3022,7 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, BUG_ON(ret != -ENOENT); di = btrfs_search_dir_index_item(root, path, dir->i_ino, name, name_len); - BUG_ON(!di || IS_ERR(di)); + BUG_ON(IS_ERR_OR_NULL(di)); leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); @@ -3032,7 +3032,7 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino, index, name, name_len, -1); - BUG_ON(!di || IS_ERR(di)); + BUG_ON(IS_ERR_OR_NULL(di)); leaf = path->nodes[0]; btrfs_dir_item_key_to_cpu(leaf, di, &key); @@ -3635,7 +3635,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) while (1) { em = btrfs_get_extent(inode, NULL, 0, cur_offset, block_end - cur_offset, 0); - BUG_ON(IS_ERR(em) || !em); + BUG_ON(IS_ERR_OR_NULL(em)); last_byte = min(extent_map_end(em), block_end); last_byte = (last_byte + mask) & ~mask; if (!test_bit(EXTENT_FLAG_PREALLOC, &em->flags)) { @@ -3841,7 +3841,7 @@ static int btrfs_inode_by_name(struct inode *dir, struct dentry *dentry, if (IS_ERR(di)) ret = PTR_ERR(di); - if (!di || IS_ERR(di)) + if (IS_ERR_OR_NULL(di)) goto out_err; btrfs_dir_item_key_to_cpu(path->nodes[0], di, location); diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 199a80134312..fed0aaec0753 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3220,7 +3220,7 @@ static int delete_block_group_cache(struct btrfs_fs_info *fs_info, key.offset = 0; inode = btrfs_iget(fs_info->sb, &key, root, NULL); - if (!inode || IS_ERR(inode) || is_bad_inode(inode)) { + if (IS_ERR_OR_NULL(inode) || is_bad_inode(inode)) { if (inode && !IS_ERR(inode)) iput(inode); return -ENOENT; diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index f997ec0c1ba4..d5313d63f967 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -1205,7 +1205,7 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, } else { BUG(); } - if (!dst_di || IS_ERR(dst_di)) { + if (IS_ERR_OR_NULL(dst_di)) { /* we need a sequence number to insert, so we only * do inserts for the BTRFS_DIR_INDEX_KEY types */ @@ -1426,7 +1426,7 @@ again: dir_key->offset, name, name_len, 0); } - if (!log_di || IS_ERR(log_di)) { + if (IS_ERR_OR_NULL(log_di)) { btrfs_dir_item_key_to_cpu(eb, di, &location); btrfs_release_path(root, path); btrfs_release_path(log, log_path); -- cgit v1.2.3 From 62a45b60923a576170a1a0c309c240d9f40d193d Mon Sep 17 00:00:00 2001 From: David Sterba Date: Wed, 20 Apr 2011 15:52:26 +0200 Subject: btrfs: make functions static when possible Signed-off-by: David Sterba --- fs/btrfs/ctree.c | 4 ++-- fs/btrfs/extent-tree.c | 6 +++--- fs/btrfs/free-space-cache.c | 4 ++-- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index c60197b36bc8..a36c87db4dc4 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -74,8 +74,8 @@ noinline void btrfs_set_path_blocking(struct btrfs_path *p) * retake all the spinlocks in the path. You can safely use NULL * for held */ -noinline void btrfs_clear_path_blocking(struct btrfs_path *p, - struct extent_buffer *held) +static noinline void btrfs_clear_path_blocking(struct btrfs_path *p, + struct extent_buffer *held) { int i; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index cd52f7f556ef..7cdce82e03e7 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -94,7 +94,7 @@ static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits) return (cache->flags & bits) == bits; } -void btrfs_get_block_group(struct btrfs_block_group_cache *cache) +static void btrfs_get_block_group(struct btrfs_block_group_cache *cache) { atomic_inc(&cache->count); } @@ -3651,8 +3651,8 @@ static void block_rsv_add_bytes(struct btrfs_block_rsv *block_rsv, spin_unlock(&block_rsv->lock); } -void block_rsv_release_bytes(struct btrfs_block_rsv *block_rsv, - struct btrfs_block_rsv *dest, u64 num_bytes) +static void block_rsv_release_bytes(struct btrfs_block_rsv *block_rsv, + struct btrfs_block_rsv *dest, u64 num_bytes) { struct btrfs_space_info *space_info = block_rsv->space_info; diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 9e69c6b8409c..d06abe20a729 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1455,8 +1455,8 @@ out: return ret; } -bool try_merge_free_space(struct btrfs_block_group_cache *block_group, - struct btrfs_free_space *info, bool update_stat) +static bool try_merge_free_space(struct btrfs_block_group_cache *block_group, + struct btrfs_free_space *info, bool update_stat) { struct btrfs_free_space *left_info; struct btrfs_free_space *right_info; -- cgit v1.2.3 From f993c883ad8e111fb9e9ae603540acbe94f7246c Mon Sep 17 00:00:00 2001 From: David Sterba Date: Wed, 20 Apr 2011 23:35:57 +0200 Subject: btrfs: drop unused argument from extent_io_tree_init all callers pass GFP_NOFS, but the GFP mask argument is not used in the function; GFP_ATOMIC is passed to radix tree initialization and it's the only correct one, since we're using the preload/insert mechanism of radix tree. Let's drop the gfp mask from btrfs function, this will not change behaviour. Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 9 ++++----- fs/btrfs/extent_io.c | 2 +- fs/btrfs/extent_io.h | 2 +- fs/btrfs/inode.c | 4 ++-- fs/btrfs/relocation.c | 2 +- fs/btrfs/transaction.c | 3 +-- 6 files changed, 10 insertions(+), 12 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 25e4b8f1d0ef..3ce80f71e98a 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1080,7 +1080,7 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize, root->log_transid = 0; root->last_log_commit = 0; extent_io_tree_init(&root->dirty_log_pages, - fs_info->btree_inode->i_mapping, GFP_NOFS); + fs_info->btree_inode->i_mapping); memset(&root->root_key, 0, sizeof(root->root_key)); memset(&root->root_item, 0, sizeof(root->root_item)); @@ -1712,8 +1712,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, RB_CLEAR_NODE(&BTRFS_I(fs_info->btree_inode)->rb_node); extent_io_tree_init(&BTRFS_I(fs_info->btree_inode)->io_tree, - fs_info->btree_inode->i_mapping, - GFP_NOFS); + fs_info->btree_inode->i_mapping); extent_map_tree_init(&BTRFS_I(fs_info->btree_inode)->extent_tree, GFP_NOFS); @@ -1729,9 +1728,9 @@ struct btrfs_root *open_ctree(struct super_block *sb, fs_info->block_group_cache_tree = RB_ROOT; extent_io_tree_init(&fs_info->freed_extents[0], - fs_info->btree_inode->i_mapping, GFP_NOFS); + fs_info->btree_inode->i_mapping); extent_io_tree_init(&fs_info->freed_extents[1], - fs_info->btree_inode->i_mapping, GFP_NOFS); + fs_info->btree_inode->i_mapping); fs_info->pinned_extents = &fs_info->freed_extents[0]; fs_info->do_barriers = 1; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 3c92712e9763..e67ed76668e0 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -101,7 +101,7 @@ void extent_io_exit(void) } void extent_io_tree_init(struct extent_io_tree *tree, - struct address_space *mapping, gfp_t mask) + struct address_space *mapping) { tree->state = RB_ROOT; INIT_RADIX_TREE(&tree->buffer, GFP_ATOMIC); diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index b9ce2f720742..e9cfe8d1661c 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -169,7 +169,7 @@ typedef struct extent_map *(get_extent_t)(struct inode *inode, int create); void extent_io_tree_init(struct extent_io_tree *tree, - struct address_space *mapping, gfp_t mask); + struct address_space *mapping); int try_release_extent_mapping(struct extent_map_tree *map, struct extent_io_tree *tree, struct page *page, gfp_t mask); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index ba760c3ced28..3c98164f8b24 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6786,8 +6786,8 @@ struct inode *btrfs_alloc_inode(struct super_block *sb) inode = &ei->vfs_inode; extent_map_tree_init(&ei->extent_tree, GFP_NOFS); - extent_io_tree_init(&ei->io_tree, &inode->i_data, GFP_NOFS); - extent_io_tree_init(&ei->io_failure_tree, &inode->i_data, GFP_NOFS); + extent_io_tree_init(&ei->io_tree, &inode->i_data); + extent_io_tree_init(&ei->io_failure_tree, &inode->i_data); mutex_init(&ei->log_mutex); btrfs_ordered_inode_tree_init(&ei->ordered_tree); INIT_LIST_HEAD(&ei->i_orphan); diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index fed0aaec0753..f3edf45317bc 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3935,7 +3935,7 @@ static struct reloc_control *alloc_reloc_control(void) INIT_LIST_HEAD(&rc->reloc_roots); backref_cache_init(&rc->backref_cache); mapping_tree_init(&rc->reloc_root_tree); - extent_io_tree_init(&rc->processed_blocks, NULL, GFP_NOFS); + extent_io_tree_init(&rc->processed_blocks, NULL); return rc; } diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index c571734d5e5a..955f76eb0fa8 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -80,8 +80,7 @@ static noinline int join_transaction(struct btrfs_root *root) INIT_LIST_HEAD(&cur_trans->pending_snapshots); list_add_tail(&cur_trans->list, &root->fs_info->trans_list); extent_io_tree_init(&cur_trans->dirty_pages, - root->fs_info->btree_inode->i_mapping, - GFP_NOFS); + root->fs_info->btree_inode->i_mapping); spin_lock(&root->fs_info->new_trans_lock); root->fs_info->running_transaction = cur_trans; spin_unlock(&root->fs_info->new_trans_lock); -- cgit v1.2.3 From a8067e022ab54fde8953880a64572c3acca644dc Mon Sep 17 00:00:00 2001 From: David Sterba Date: Thu, 21 Apr 2011 00:34:43 +0200 Subject: btrfs: drop unused parameter from extent_map_tree_init the GFP flags are not stored anywhere and all allocations are done via alloc_extent_map(GFP_NOFS). Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 3 +-- fs/btrfs/extent_map.c | 3 +-- fs/btrfs/extent_map.h | 2 +- fs/btrfs/inode.c | 2 +- fs/btrfs/volumes.c | 2 +- 5 files changed, 5 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 3ce80f71e98a..f2ee584b8efd 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1713,8 +1713,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, RB_CLEAR_NODE(&BTRFS_I(fs_info->btree_inode)->rb_node); extent_io_tree_init(&BTRFS_I(fs_info->btree_inode)->io_tree, fs_info->btree_inode->i_mapping); - extent_map_tree_init(&BTRFS_I(fs_info->btree_inode)->extent_tree, - GFP_NOFS); + extent_map_tree_init(&BTRFS_I(fs_info->btree_inode)->extent_tree); BTRFS_I(fs_info->btree_inode)->io_tree.ops = &btree_extent_io_ops; diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index a24a3f2fa13e..3c8f374a8e2d 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -28,12 +28,11 @@ void extent_map_exit(void) /** * extent_map_tree_init - initialize extent map tree * @tree: tree to initialize - * @mask: flags for memory allocations during tree operations * * Initialize the extent tree @tree. Should be called for each new inode * or other user of the extent_map interface. */ -void extent_map_tree_init(struct extent_map_tree *tree, gfp_t mask) +void extent_map_tree_init(struct extent_map_tree *tree) { tree->map = RB_ROOT; rwlock_init(&tree->lock); diff --git a/fs/btrfs/extent_map.h b/fs/btrfs/extent_map.h index 28b44dbd1e35..255813c51b9d 100644 --- a/fs/btrfs/extent_map.h +++ b/fs/btrfs/extent_map.h @@ -49,7 +49,7 @@ static inline u64 extent_map_block_end(struct extent_map *em) return em->block_start + em->block_len; } -void extent_map_tree_init(struct extent_map_tree *tree, gfp_t mask); +void extent_map_tree_init(struct extent_map_tree *tree); struct extent_map *lookup_extent_mapping(struct extent_map_tree *tree, u64 start, u64 len); int add_extent_mapping(struct extent_map_tree *tree, diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 3c98164f8b24..f54c015cc294 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6785,7 +6785,7 @@ struct inode *btrfs_alloc_inode(struct super_block *sb) ei->force_compress = BTRFS_COMPRESS_NONE; inode = &ei->vfs_inode; - extent_map_tree_init(&ei->extent_tree, GFP_NOFS); + extent_map_tree_init(&ei->extent_tree); extent_io_tree_init(&ei->io_tree, &inode->i_data); extent_io_tree_init(&ei->io_failure_tree, &inode->i_data); mutex_init(&ei->log_mutex); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index c7367ae5a3e6..15d7dc943c9b 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2849,7 +2849,7 @@ int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset) void btrfs_mapping_init(struct btrfs_mapping_tree *tree) { - extent_map_tree_init(&tree->map_tree, GFP_NOFS); + extent_map_tree_init(&tree->map_tree); } void btrfs_mapping_tree_free(struct btrfs_mapping_tree *tree) -- cgit v1.2.3 From 172ddd60a662c4d8bf2809462866ddddd6431ea5 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Thu, 21 Apr 2011 00:48:27 +0200 Subject: btrfs: drop gfp parameter from alloc_extent_map pass GFP_NOFS directly to kmem_cache_alloc Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 2 +- fs/btrfs/extent-tree.c | 2 +- fs/btrfs/extent_map.c | 5 ++--- fs/btrfs/extent_map.h | 2 +- fs/btrfs/file.c | 4 ++-- fs/btrfs/inode.c | 12 ++++++------ fs/btrfs/relocation.c | 2 +- fs/btrfs/volumes.c | 4 ++-- 8 files changed, 16 insertions(+), 17 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index f2ee584b8efd..e1e55679d061 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -154,7 +154,7 @@ static struct extent_map *btree_get_extent(struct inode *inode, } read_unlock(&em_tree->lock); - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); if (!em) { em = ERR_PTR(-ENOMEM); goto out; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 7cdce82e03e7..6a3d53783d55 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6694,7 +6694,7 @@ static noinline int relocate_data_extent(struct inode *reloc_inode, u64 start = extent_key->objectid - offset; u64 end = start + extent_key->offset - 1; - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); BUG_ON(!em); em->start = start; diff --git a/fs/btrfs/extent_map.c b/fs/btrfs/extent_map.c index 3c8f374a8e2d..2d0410344ea3 100644 --- a/fs/btrfs/extent_map.c +++ b/fs/btrfs/extent_map.c @@ -40,16 +40,15 @@ void extent_map_tree_init(struct extent_map_tree *tree) /** * alloc_extent_map - allocate new extent map structure - * @mask: memory allocation flags * * Allocate a new extent_map structure. The new structure is * returned with a reference count of one and needs to be * freed using free_extent_map() */ -struct extent_map *alloc_extent_map(gfp_t mask) +struct extent_map *alloc_extent_map(void) { struct extent_map *em; - em = kmem_cache_alloc(extent_map_cache, mask); + em = kmem_cache_alloc(extent_map_cache, GFP_NOFS); if (!em) return NULL; em->in_tree = 0; diff --git a/fs/btrfs/extent_map.h b/fs/btrfs/extent_map.h index 255813c51b9d..33a7890b1f40 100644 --- a/fs/btrfs/extent_map.h +++ b/fs/btrfs/extent_map.h @@ -56,7 +56,7 @@ int add_extent_mapping(struct extent_map_tree *tree, struct extent_map *em); int remove_extent_mapping(struct extent_map_tree *tree, struct extent_map *em); -struct extent_map *alloc_extent_map(gfp_t mask); +struct extent_map *alloc_extent_map(void); void free_extent_map(struct extent_map *em); int __init extent_map_init(void); void extent_map_exit(void); diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 83abd274370b..80eabe85409a 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -191,9 +191,9 @@ int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end, } while (1) { if (!split) - split = alloc_extent_map(GFP_NOFS); + split = alloc_extent_map(); if (!split2) - split2 = alloc_extent_map(GFP_NOFS); + split2 = alloc_extent_map(); BUG_ON(!split || !split2); write_lock(&em_tree->lock); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f54c015cc294..26f4d56cf049 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -649,7 +649,7 @@ retry: async_extent->start + async_extent->ram_size - 1, 0); - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); BUG_ON(!em); em->start = async_extent->start; em->len = async_extent->ram_size; @@ -826,7 +826,7 @@ static noinline int cow_file_range(struct inode *inode, (u64)-1, &ins, 1); BUG_ON(ret); - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); BUG_ON(!em); em->start = start; em->orig_start = em->start; @@ -1177,7 +1177,7 @@ out_check: struct extent_map *em; struct extent_map_tree *em_tree; em_tree = &BTRFS_I(inode)->extent_tree; - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); BUG_ON(!em); em->start = cur_offset; em->orig_start = em->start; @@ -5069,7 +5069,7 @@ again: else goto out; } - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); if (!em) { err = -ENOMEM; goto out; @@ -5382,7 +5382,7 @@ struct extent_map *btrfs_get_extent_fiemap(struct inode *inode, struct page *pag u64 hole_start = start; u64 hole_len = len; - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); if (!em) { err = -ENOMEM; goto out; @@ -5483,7 +5483,7 @@ static struct extent_map *btrfs_new_extent_direct(struct inode *inode, } if (!em) { - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); if (!em) { em = ERR_PTR(-ENOMEM); goto out; diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index f3edf45317bc..2097a88f60aa 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -2870,7 +2870,7 @@ int setup_extent_mapping(struct inode *inode, u64 start, u64 end, struct extent_map *em; int ret = 0; - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); if (!em) return -ENOMEM; diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 15d7dc943c9b..76acd1d235e4 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2609,7 +2609,7 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, trace_btrfs_chunk_alloc(info->chunk_root, map, start, *num_bytes); - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); if (!em) { ret = -ENOMEM; goto error; @@ -3499,7 +3499,7 @@ static int read_one_chunk(struct btrfs_root *root, struct btrfs_key *key, free_extent_map(em); } - em = alloc_extent_map(GFP_NOFS); + em = alloc_extent_map(); if (!em) return -ENOMEM; num_stripes = btrfs_chunk_num_stripes(leaf, chunk); -- cgit v1.2.3 From f09d1f60e6aa82fb4cfaa525e21f6287fc1516f4 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Thu, 21 Apr 2011 01:08:01 +0200 Subject: btrfs: drop gfp parameter from find_extent_buffer pass GFP_NOFS directly to kmem_cache_alloc Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 4 ++-- fs/btrfs/extent_io.c | 3 +-- fs/btrfs/extent_io.h | 3 +-- 3 files changed, 4 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index e1e55679d061..1c0752e99066 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -963,7 +963,7 @@ struct extent_buffer *btrfs_find_tree_block(struct btrfs_root *root, struct inode *btree_inode = root->fs_info->btree_inode; struct extent_buffer *eb; eb = find_extent_buffer(&BTRFS_I(btree_inode)->io_tree, - bytenr, blocksize, GFP_NOFS); + bytenr, blocksize); return eb; } @@ -2696,7 +2696,7 @@ int btree_lock_page_hook(struct page *page) goto out; len = page->private >> 2; - eb = find_extent_buffer(io_tree, bytenr, len, GFP_NOFS); + eb = find_extent_buffer(io_tree, bytenr, len); if (!eb) goto out; diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index e67ed76668e0..ad0f0a95ad3a 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3377,8 +3377,7 @@ free_eb: } struct extent_buffer *find_extent_buffer(struct extent_io_tree *tree, - u64 start, unsigned long len, - gfp_t mask) + u64 start, unsigned long len) { struct extent_buffer *eb; diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index e9cfe8d1661c..ff220c3c01b0 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -263,8 +263,7 @@ struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree, struct page *page0, gfp_t mask); struct extent_buffer *find_extent_buffer(struct extent_io_tree *tree, - u64 start, unsigned long len, - gfp_t mask); + u64 start, unsigned long len); void free_extent_buffer(struct extent_buffer *eb); int read_extent_buffer_pages(struct extent_io_tree *tree, struct extent_buffer *eb, u64 start, int wait, -- cgit v1.2.3 From ba14419264684b290f0d0b7f48d26eafb11fc0c6 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Thu, 21 Apr 2011 01:12:06 +0200 Subject: btrfs: drop gfp parameter from alloc_extent_buffer pass GFP_NOFS directly to kmem_cache_alloc Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 6 +++--- fs/btrfs/extent_io.c | 7 +++---- fs/btrfs/extent_io.h | 3 +-- 3 files changed, 7 insertions(+), 9 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 1c0752e99066..4084959b36fd 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -380,7 +380,7 @@ static int csum_dirty_buffer(struct btrfs_root *root, struct page *page) len = page->private >> 2; WARN_ON(len == 0); - eb = alloc_extent_buffer(tree, start, len, page, GFP_NOFS); + eb = alloc_extent_buffer(tree, start, len, page); if (eb == NULL) { WARN_ON(1); goto out; @@ -525,7 +525,7 @@ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end, len = page->private >> 2; WARN_ON(len == 0); - eb = alloc_extent_buffer(tree, start, len, page, GFP_NOFS); + eb = alloc_extent_buffer(tree, start, len, page); if (eb == NULL) { ret = -EIO; goto out; @@ -974,7 +974,7 @@ struct extent_buffer *btrfs_find_create_tree_block(struct btrfs_root *root, struct extent_buffer *eb; eb = alloc_extent_buffer(&BTRFS_I(btree_inode)->io_tree, - bytenr, blocksize, NULL, GFP_NOFS); + bytenr, blocksize, NULL); return eb; } diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index ad0f0a95ad3a..9369289ce771 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3266,8 +3266,7 @@ static inline void btrfs_release_extent_buffer(struct extent_buffer *eb) struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree, u64 start, unsigned long len, - struct page *page0, - gfp_t mask) + struct page *page0) { unsigned long num_pages = num_extent_pages(start, len); unsigned long i; @@ -3288,7 +3287,7 @@ struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree, } rcu_read_unlock(); - eb = __alloc_extent_buffer(tree, start, len, mask); + eb = __alloc_extent_buffer(tree, start, len, GFP_NOFS); if (!eb) return NULL; @@ -3305,7 +3304,7 @@ struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree, i = 0; } for (; i < num_pages; i++, index++) { - p = find_or_create_page(mapping, index, mask | __GFP_HIGHMEM); + p = find_or_create_page(mapping, index, GFP_NOFS | __GFP_HIGHMEM); if (!p) { WARN_ON(1); goto free_eb; diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index ff220c3c01b0..3c3be74c934e 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -260,8 +260,7 @@ void set_page_extent_mapped(struct page *page); struct extent_buffer *alloc_extent_buffer(struct extent_io_tree *tree, u64 start, unsigned long len, - struct page *page0, - gfp_t mask); + struct page *page0); struct extent_buffer *find_extent_buffer(struct extent_io_tree *tree, u64 start, unsigned long len); void free_extent_buffer(struct extent_buffer *eb); -- cgit v1.2.3 From b3b4aa74b58bded927f579fff787fb6fa1c0393c Mon Sep 17 00:00:00 2001 From: David Sterba Date: Thu, 21 Apr 2011 01:20:15 +0200 Subject: btrfs: drop unused parameter from btrfs_release_path parameter tree root it's not used since commit 5f39d397dfbe140a14edecd4e73c34ce23c4f9ee ("Btrfs: Create extent_buffer interface for large blocksizes") Signed-off-by: David Sterba --- fs/btrfs/ctree.c | 28 ++++++------- fs/btrfs/ctree.h | 2 +- fs/btrfs/dir-item.c | 2 +- fs/btrfs/extent-tree.c | 44 ++++++++++---------- fs/btrfs/file-item.c | 12 +++--- fs/btrfs/file.c | 12 +++--- fs/btrfs/free-space-cache.c | 14 +++---- fs/btrfs/inode.c | 34 ++++++++-------- fs/btrfs/ioctl.c | 12 +++--- fs/btrfs/relocation.c | 30 +++++++------- fs/btrfs/root-tree.c | 10 ++--- fs/btrfs/tree-defrag.c | 2 +- fs/btrfs/tree-log.c | 98 ++++++++++++++++++++++----------------------- fs/btrfs/volumes.c | 16 ++++---- fs/btrfs/xattr.c | 4 +- 15 files changed, 160 insertions(+), 160 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index a36c87db4dc4..fad8f23d70f0 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -107,7 +107,7 @@ void btrfs_free_path(struct btrfs_path *p) { if (!p) return; - btrfs_release_path(NULL, p); + btrfs_release_path(p); kmem_cache_free(btrfs_path_cachep, p); } @@ -117,7 +117,7 @@ void btrfs_free_path(struct btrfs_path *p) * * It is safe to call this on paths that no locks or extent buffers held. */ -noinline void btrfs_release_path(struct btrfs_root *root, struct btrfs_path *p) +noinline void btrfs_release_path(struct btrfs_path *p) { int i; @@ -1328,7 +1328,7 @@ static noinline int reada_for_balance(struct btrfs_root *root, ret = -EAGAIN; /* release the whole path */ - btrfs_release_path(root, path); + btrfs_release_path(path); /* read the blocks */ if (block1) @@ -1475,7 +1475,7 @@ read_block_for_search(struct btrfs_trans_handle *trans, return 0; } free_extent_buffer(tmp); - btrfs_release_path(NULL, p); + btrfs_release_path(p); return -EIO; } } @@ -1494,7 +1494,7 @@ read_block_for_search(struct btrfs_trans_handle *trans, if (p->reada) reada_for_search(root, p, level, slot, key->objectid); - btrfs_release_path(NULL, p); + btrfs_release_path(p); ret = -EAGAIN; tmp = read_tree_block(root, blocknr, blocksize, 0); @@ -1563,7 +1563,7 @@ setup_nodes_for_search(struct btrfs_trans_handle *trans, } b = p->nodes[level]; if (!b) { - btrfs_release_path(NULL, p); + btrfs_release_path(p); goto again; } BUG_ON(btrfs_header_nritems(b) == 1); @@ -1753,7 +1753,7 @@ done: if (!p->leave_spinning) btrfs_set_path_blocking(p); if (ret < 0) - btrfs_release_path(root, p); + btrfs_release_path(p); return ret; } @@ -3026,7 +3026,7 @@ static noinline int setup_leaf_for_split(struct btrfs_trans_handle *trans, struct btrfs_file_extent_item); extent_len = btrfs_file_extent_num_bytes(leaf, fi); } - btrfs_release_path(root, path); + btrfs_release_path(path); path->keep_locks = 1; path->search_for_split = 1; @@ -3948,7 +3948,7 @@ int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path) else return 1; - btrfs_release_path(root, path); + btrfs_release_path(path); ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); if (ret < 0) return ret; @@ -4072,7 +4072,7 @@ find_next_key: sret = btrfs_find_next_key(root, path, min_key, level, cache_only, min_trans); if (sret == 0) { - btrfs_release_path(root, path); + btrfs_release_path(path); goto again; } else { goto out; @@ -4151,7 +4151,7 @@ next: btrfs_node_key_to_cpu(c, &cur_key, slot); orig_lowest = path->lowest_level; - btrfs_release_path(root, path); + btrfs_release_path(path); path->lowest_level = level; ret = btrfs_search_slot(NULL, root, &cur_key, path, 0, 0); @@ -4228,7 +4228,7 @@ int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path) again: level = 1; next = NULL; - btrfs_release_path(root, path); + btrfs_release_path(path); path->keep_locks = 1; @@ -4284,7 +4284,7 @@ again: goto again; if (ret < 0) { - btrfs_release_path(root, path); + btrfs_release_path(path); goto done; } @@ -4323,7 +4323,7 @@ again: goto again; if (ret < 0) { - btrfs_release_path(root, path); + btrfs_release_path(path); goto done; } diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index b5433bbe7516..3f301f05099d 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2290,7 +2290,7 @@ int btrfs_realloc_node(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *parent, int start_slot, int cache_only, u64 *last_ret, struct btrfs_key *progress); -void btrfs_release_path(struct btrfs_root *root, struct btrfs_path *p); +void btrfs_release_path(struct btrfs_path *p); struct btrfs_path *btrfs_alloc_path(void); void btrfs_free_path(struct btrfs_path *p); void btrfs_set_path_blocking(struct btrfs_path *p); diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c index c62f02f6ae69..ab8afed671a0 100644 --- a/fs/btrfs/dir-item.c +++ b/fs/btrfs/dir-item.c @@ -172,7 +172,7 @@ second_insert: ret = 0; goto out_free; } - btrfs_release_path(root, path); + btrfs_release_path(path); btrfs_set_key_type(&key, BTRFS_DIR_INDEX_KEY); key.offset = index; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 6a3d53783d55..a160f11465f8 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -379,7 +379,7 @@ again: break; caching_ctl->progress = last; - btrfs_release_path(extent_root, path); + btrfs_release_path(path); up_read(&fs_info->extent_commit_sem); mutex_unlock(&caching_ctl->mutex); if (btrfs_transaction_in_commit(fs_info)) @@ -754,7 +754,7 @@ again: atomic_inc(&head->node.refs); spin_unlock(&delayed_refs->lock); - btrfs_release_path(root->fs_info->extent_root, path); + btrfs_release_path(path); mutex_lock(&head->mutex); mutex_unlock(&head->mutex); @@ -934,7 +934,7 @@ static int convert_extent_item_v0(struct btrfs_trans_handle *trans, break; } } - btrfs_release_path(root, path); + btrfs_release_path(path); if (owner < BTRFS_FIRST_FREE_OBJECTID) new_size += sizeof(*bi); @@ -1042,7 +1042,7 @@ again: return 0; #ifdef BTRFS_COMPAT_EXTENT_TREE_V0 key.type = BTRFS_EXTENT_REF_V0_KEY; - btrfs_release_path(root, path); + btrfs_release_path(path); ret = btrfs_search_slot(trans, root, &key, path, -1, 1); if (ret < 0) { err = ret; @@ -1080,7 +1080,7 @@ again: if (match_extent_data_ref(leaf, ref, root_objectid, owner, offset)) { if (recow) { - btrfs_release_path(root, path); + btrfs_release_path(path); goto again; } err = 0; @@ -1141,7 +1141,7 @@ static noinline int insert_extent_data_ref(struct btrfs_trans_handle *trans, if (match_extent_data_ref(leaf, ref, root_objectid, owner, offset)) break; - btrfs_release_path(root, path); + btrfs_release_path(path); key.offset++; ret = btrfs_insert_empty_item(trans, root, path, &key, size); @@ -1167,7 +1167,7 @@ static noinline int insert_extent_data_ref(struct btrfs_trans_handle *trans, btrfs_mark_buffer_dirty(leaf); ret = 0; fail: - btrfs_release_path(root, path); + btrfs_release_path(path); return ret; } @@ -1293,7 +1293,7 @@ static noinline int lookup_tree_block_ref(struct btrfs_trans_handle *trans, ret = -ENOENT; #ifdef BTRFS_COMPAT_EXTENT_TREE_V0 if (ret == -ENOENT && parent) { - btrfs_release_path(root, path); + btrfs_release_path(path); key.type = BTRFS_EXTENT_REF_V0_KEY; ret = btrfs_search_slot(trans, root, &key, path, -1, 1); if (ret > 0) @@ -1322,7 +1322,7 @@ static noinline int insert_tree_block_ref(struct btrfs_trans_handle *trans, } ret = btrfs_insert_empty_item(trans, root, path, &key, 0); - btrfs_release_path(root, path); + btrfs_release_path(path); return ret; } @@ -1608,7 +1608,7 @@ static int lookup_extent_backref(struct btrfs_trans_handle *trans, if (ret != -ENOENT) return ret; - btrfs_release_path(root, path); + btrfs_release_path(path); *ref_ret = NULL; if (owner < BTRFS_FIRST_FREE_OBJECTID) { @@ -1862,7 +1862,7 @@ static int __btrfs_inc_extent_ref(struct btrfs_trans_handle *trans, __run_delayed_extent_op(extent_op, leaf, item); btrfs_mark_buffer_dirty(leaf); - btrfs_release_path(root->fs_info->extent_root, path); + btrfs_release_path(path); path->reada = 1; path->leave_spinning = 1; @@ -2361,7 +2361,7 @@ static noinline int check_delayed_ref(struct btrfs_trans_handle *trans, atomic_inc(&head->node.refs); spin_unlock(&delayed_refs->lock); - btrfs_release_path(root->fs_info->extent_root, path); + btrfs_release_path(path); mutex_lock(&head->mutex); mutex_unlock(&head->mutex); @@ -2732,7 +2732,7 @@ static int write_one_cache_group(struct btrfs_trans_handle *trans, bi = btrfs_item_ptr_offset(leaf, path->slots[0]); write_extent_buffer(leaf, &cache->item, bi, sizeof(cache->item)); btrfs_mark_buffer_dirty(leaf); - btrfs_release_path(extent_root, path); + btrfs_release_path(path); fail: if (ret) return ret; @@ -2785,7 +2785,7 @@ again: inode = lookup_free_space_inode(root, block_group, path); if (IS_ERR(inode) && PTR_ERR(inode) != -ENOENT) { ret = PTR_ERR(inode); - btrfs_release_path(root, path); + btrfs_release_path(path); goto out; } @@ -2854,7 +2854,7 @@ again: out_put: iput(inode); out_free: - btrfs_release_path(root, path); + btrfs_release_path(path); out: spin_lock(&block_group->lock); block_group->disk_cache_state = dcs; @@ -4541,7 +4541,7 @@ static int __btrfs_free_extent(struct btrfs_trans_handle *trans, NULL, refs_to_drop, is_data); BUG_ON(ret); - btrfs_release_path(extent_root, path); + btrfs_release_path(path); path->leave_spinning = 1; key.objectid = bytenr; @@ -4580,7 +4580,7 @@ static int __btrfs_free_extent(struct btrfs_trans_handle *trans, owner_objectid, 0); BUG_ON(ret < 0); - btrfs_release_path(extent_root, path); + btrfs_release_path(path); path->leave_spinning = 1; key.objectid = bytenr; @@ -4650,7 +4650,7 @@ static int __btrfs_free_extent(struct btrfs_trans_handle *trans, ret = btrfs_del_items(trans, extent_root, path, path->slots[0], num_to_del); BUG_ON(ret); - btrfs_release_path(extent_root, path); + btrfs_release_path(path); if (is_data) { ret = btrfs_del_csums(trans, root, bytenr, num_bytes); @@ -6480,7 +6480,7 @@ int btrfs_drop_snapshot(struct btrfs_root *root, trans->block_rsv = block_rsv; } } - btrfs_release_path(root, path); + btrfs_release_path(path); BUG_ON(err); ret = btrfs_del_root(trans, tree_root, &root->root_key); @@ -8580,7 +8580,7 @@ int btrfs_read_block_groups(struct btrfs_root *root) memcpy(&cache->key, &found_key, sizeof(found_key)); key.objectid = found_key.objectid + found_key.offset; - btrfs_release_path(root, path); + btrfs_release_path(path); cache->flags = btrfs_block_group_flags(&cache->item); cache->sectorsize = root->sectorsize; @@ -8802,12 +8802,12 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans, if (ret < 0) goto out; if (ret > 0) - btrfs_release_path(tree_root, path); + btrfs_release_path(path); if (ret == 0) { ret = btrfs_del_item(trans, tree_root, path); if (ret) goto out; - btrfs_release_path(tree_root, path); + btrfs_release_path(path); } spin_lock(&root->fs_info->block_group_cache_lock); diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index a6a9d4e8b491..f47e43d855aa 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -193,7 +193,7 @@ static int __btrfs_lookup_bio_sums(struct btrfs_root *root, u32 item_size; if (item) - btrfs_release_path(root, path); + btrfs_release_path(path); item = btrfs_lookup_csum(NULL, root->fs_info->csum_root, path, disk_bytenr, 0); if (IS_ERR(item)) { @@ -213,7 +213,7 @@ static int __btrfs_lookup_bio_sums(struct btrfs_root *root, (unsigned long long)offset); } item = NULL; - btrfs_release_path(root, path); + btrfs_release_path(path); goto found; } btrfs_item_key_to_cpu(path->nodes[0], &found_key, @@ -631,7 +631,7 @@ int btrfs_del_csums(struct btrfs_trans_handle *trans, if (key.offset < bytenr) break; } - btrfs_release_path(root, path); + btrfs_release_path(path); } out: btrfs_free_path(path); @@ -722,7 +722,7 @@ again: * at this point, we know the tree has an item, but it isn't big * enough yet to put our csum in. Grow it */ - btrfs_release_path(root, path); + btrfs_release_path(path); ret = btrfs_search_slot(trans, root, &file_key, path, csum_size, 1); if (ret < 0) @@ -766,7 +766,7 @@ again: } insert: - btrfs_release_path(root, path); + btrfs_release_path(path); csum_offset = 0; if (found_next) { u64 tmp = total_bytes + root->sectorsize; @@ -850,7 +850,7 @@ next_sector: } btrfs_mark_buffer_dirty(path->nodes[0]); if (total_bytes < sums->len) { - btrfs_release_path(root, path); + btrfs_release_path(path); cond_resched(); goto again; } diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 80eabe85409a..566bdf298ea8 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -376,7 +376,7 @@ next_slot: search_start = max(key.offset, start); if (recow) { - btrfs_release_path(root, path); + btrfs_release_path(path); continue; } @@ -393,7 +393,7 @@ next_slot: ret = btrfs_duplicate_item(trans, root, path, &new_key); if (ret == -EAGAIN) { - btrfs_release_path(root, path); + btrfs_release_path(path); continue; } if (ret < 0) @@ -516,7 +516,7 @@ next_slot: del_nr = 0; del_slot = 0; - btrfs_release_path(root, path); + btrfs_release_path(path); continue; } @@ -681,7 +681,7 @@ again: new_key.offset = split; ret = btrfs_duplicate_item(trans, root, path, &new_key); if (ret == -EAGAIN) { - btrfs_release_path(root, path); + btrfs_release_path(path); goto again; } BUG_ON(ret < 0); @@ -721,7 +721,7 @@ again: inode->i_ino, bytenr, orig_offset, &other_start, &other_end)) { if (recow) { - btrfs_release_path(root, path); + btrfs_release_path(path); goto again; } extent_end = other_end; @@ -738,7 +738,7 @@ again: inode->i_ino, bytenr, orig_offset, &other_start, &other_end)) { if (recow) { - btrfs_release_path(root, path); + btrfs_release_path(path); goto again; } key.offset = other_start; diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index d06abe20a729..48fafcb85b0e 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -61,7 +61,7 @@ struct inode *lookup_free_space_inode(struct btrfs_root *root, if (ret < 0) return ERR_PTR(ret); if (ret > 0) { - btrfs_release_path(root, path); + btrfs_release_path(path); return ERR_PTR(-ENOENT); } @@ -70,7 +70,7 @@ struct inode *lookup_free_space_inode(struct btrfs_root *root, struct btrfs_free_space_header); btrfs_free_space_key(leaf, header, &disk_key); btrfs_disk_key_to_cpu(&location, &disk_key); - btrfs_release_path(root, path); + btrfs_release_path(path); inode = btrfs_iget(root->fs_info->sb, &location, root, NULL); if (!inode) @@ -134,7 +134,7 @@ int create_free_space_inode(struct btrfs_root *root, btrfs_set_inode_block_group(leaf, inode_item, block_group->key.objectid); btrfs_mark_buffer_dirty(leaf); - btrfs_release_path(root, path); + btrfs_release_path(path); key.objectid = BTRFS_FREE_SPACE_OBJECTID; key.offset = block_group->key.objectid; @@ -143,7 +143,7 @@ int create_free_space_inode(struct btrfs_root *root, ret = btrfs_insert_empty_item(trans, root, path, &key, sizeof(struct btrfs_free_space_header)); if (ret < 0) { - btrfs_release_path(root, path); + btrfs_release_path(path); return ret; } leaf = path->nodes[0]; @@ -152,7 +152,7 @@ int create_free_space_inode(struct btrfs_root *root, memset_extent_buffer(leaf, 0, (unsigned long)header, sizeof(*header)); btrfs_set_free_space_key(leaf, header, &disk_key); btrfs_mark_buffer_dirty(leaf); - btrfs_release_path(root, path); + btrfs_release_path(path); return 0; } @@ -822,7 +822,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, EXTENT_DIRTY | EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING, 0, 0, NULL, GFP_NOFS); - btrfs_release_path(root, path); + btrfs_release_path(path); goto out_free; } } @@ -832,7 +832,7 @@ int btrfs_write_out_cache(struct btrfs_root *root, btrfs_set_free_space_bitmaps(leaf, header, bitmaps); btrfs_set_free_space_generation(leaf, header, trans->transid); btrfs_mark_buffer_dirty(leaf); - btrfs_release_path(root, path); + btrfs_release_path(path); ret = 1; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 26f4d56cf049..2840989737b7 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1164,7 +1164,7 @@ out_check: goto next_slot; } - btrfs_release_path(root, path); + btrfs_release_path(path); if (cow_start != (u64)-1) { ret = cow_file_range(inode, locked_page, cow_start, found_key.offset - 1, page_started, @@ -1222,7 +1222,7 @@ out_check: if (cur_offset > end) break; } - btrfs_release_path(root, path); + btrfs_release_path(path); if (cur_offset <= end && cow_start == (u64)-1) cow_start = cur_offset; @@ -2346,7 +2346,7 @@ int btrfs_orphan_cleanup(struct btrfs_root *root) break; /* release the path since we're done with it */ - btrfs_release_path(root, path); + btrfs_release_path(path); /* * this is where we are basically btrfs_lookup, without the @@ -2712,7 +2712,7 @@ static int __btrfs_unlink_inode(struct btrfs_trans_handle *trans, ret = btrfs_delete_one_dir_name(trans, root, path, di); if (ret) goto err; - btrfs_release_path(root, path); + btrfs_release_path(path); ret = btrfs_del_inode_ref(trans, root, name, name_len, inode->i_ino, @@ -2735,7 +2735,7 @@ static int __btrfs_unlink_inode(struct btrfs_trans_handle *trans, goto err; } ret = btrfs_delete_one_dir_name(trans, root, path, di); - btrfs_release_path(root, path); + btrfs_release_path(path); ret = btrfs_del_inode_ref_in_log(trans, root, name, name_len, inode, dir->i_ino); @@ -2862,7 +2862,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, } else { check_link = 0; } - btrfs_release_path(root, path); + btrfs_release_path(path); ret = btrfs_lookup_inode(trans, root, path, &BTRFS_I(inode)->location, 0); @@ -2876,7 +2876,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, } else { check_link = 0; } - btrfs_release_path(root, path); + btrfs_release_path(path); if (ret == 0 && S_ISREG(inode->i_mode)) { ret = btrfs_lookup_file_extent(trans, root, path, @@ -2888,7 +2888,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, BUG_ON(ret == 0); if (check_path_shared(root, path)) goto out; - btrfs_release_path(root, path); + btrfs_release_path(path); } if (!check_link) { @@ -2909,7 +2909,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, err = 0; goto out; } - btrfs_release_path(root, path); + btrfs_release_path(path); ref = btrfs_lookup_inode_ref(trans, root, path, dentry->d_name.name, dentry->d_name.len, @@ -2922,7 +2922,7 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, if (check_path_shared(root, path)) goto out; index = btrfs_inode_ref_index(path->nodes[0], ref); - btrfs_release_path(root, path); + btrfs_release_path(path); di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino, index, dentry->d_name.name, dentry->d_name.len, 0); @@ -3013,7 +3013,7 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, WARN_ON(key.type != BTRFS_ROOT_ITEM_KEY || key.objectid != objectid); ret = btrfs_delete_one_dir_name(trans, root, path, di); BUG_ON(ret); - btrfs_release_path(root, path); + btrfs_release_path(path); ret = btrfs_del_root_ref(trans, root->fs_info->tree_root, objectid, root->root_key.objectid, @@ -3026,7 +3026,7 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); - btrfs_release_path(root, path); + btrfs_release_path(path); index = key.offset; } @@ -3039,7 +3039,7 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, WARN_ON(key.type != BTRFS_ROOT_ITEM_KEY || key.objectid != objectid); ret = btrfs_delete_one_dir_name(trans, root, path, di); BUG_ON(ret); - btrfs_release_path(root, path); + btrfs_release_path(path); btrfs_i_size_write(dir, dir->i_size - name_len * 2); dir->i_mtime = dir->i_ctime = CURRENT_TIME; @@ -3477,7 +3477,7 @@ delete: BUG_ON(ret); pending_del_nr = 0; } - btrfs_release_path(root, path); + btrfs_release_path(path); goto search_again; } else { path->slots[0]--; @@ -3899,7 +3899,7 @@ static int fixup_tree_root_location(struct btrfs_root *root, if (ret) goto out; - btrfs_release_path(root->fs_info->tree_root, path); + btrfs_release_path(path); new_root = btrfs_read_fs_root_no_name(root->fs_info, location); if (IS_ERR(new_root)) { @@ -5223,7 +5223,7 @@ again: kunmap(page); free_extent_map(em); em = NULL; - btrfs_release_path(root, path); + btrfs_release_path(path); trans = btrfs_join_transaction(root, 1); if (IS_ERR(trans)) return ERR_CAST(trans); @@ -5249,7 +5249,7 @@ not_found_em: em->block_start = EXTENT_MAP_HOLE; set_bit(EXTENT_FLAG_VACANCY, &em->flags); insert: - btrfs_release_path(root, path); + btrfs_release_path(path); if (em->start > start || extent_map_end(em) <= start) { printk(KERN_ERR "Btrfs: bad extent! em: [%llu %llu] passed " "[%llu %llu]\n", (unsigned long long)em->start, diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index ffb48d6c5433..d11fc6548e15 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1396,7 +1396,7 @@ static noinline int search_ioctl(struct inode *inode, } ret = copy_to_sk(root, path, &key, sk, args->buf, &sk_offset, &num_found); - btrfs_release_path(root, path); + btrfs_release_path(path); if (ret || num_found >= sk->nr_items) break; @@ -1503,7 +1503,7 @@ static noinline int btrfs_search_path_in_tree(struct btrfs_fs_info *info, if (key.offset == BTRFS_FIRST_FREE_OBJECTID) break; - btrfs_release_path(root, path); + btrfs_release_path(path); key.objectid = key.offset; key.offset = (u64)-1; dirid = key.objectid; @@ -1982,7 +1982,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, datal = btrfs_file_extent_ram_bytes(leaf, extent); } - btrfs_release_path(root, path); + btrfs_release_path(path); if (key.offset + datal <= off || key.offset >= off+len) @@ -2092,7 +2092,7 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, } btrfs_mark_buffer_dirty(leaf); - btrfs_release_path(root, path); + btrfs_release_path(path); inode->i_mtime = inode->i_ctime = CURRENT_TIME; @@ -2113,12 +2113,12 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, btrfs_end_transaction(trans, root); } next: - btrfs_release_path(root, path); + btrfs_release_path(path); key.offset++; } ret = 0; out: - btrfs_release_path(root, path); + btrfs_release_path(path); unlock_extent(&BTRFS_I(src)->io_tree, off, off+len, GFP_NOFS); out_unlock: mutex_unlock(&src->i_mutex); diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 2097a88f60aa..f7b799b151aa 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -961,7 +961,7 @@ again: lower = upper; upper = NULL; } - btrfs_release_path(root, path2); + btrfs_release_path(path2); next: if (ptr < end) { ptr += btrfs_extent_inline_ref_size(key.type); @@ -974,7 +974,7 @@ next: if (ptr >= end) path1->slots[0]++; } - btrfs_release_path(rc->extent_root, path1); + btrfs_release_path(path1); cur->checked = 1; WARN_ON(exist); @@ -1749,7 +1749,7 @@ again: btrfs_node_key_to_cpu(path->nodes[level], &key, path->slots[level]); - btrfs_release_path(src, path); + btrfs_release_path(path); path->lowest_level = level; ret = btrfs_search_slot(trans, src, &key, path, 0, 1); @@ -2496,7 +2496,7 @@ static int do_relocation(struct btrfs_trans_handle *trans, path->locks[upper->level] = 0; slot = path->slots[upper->level]; - btrfs_release_path(NULL, path); + btrfs_release_path(path); } else { ret = btrfs_bin_search(upper->eb, key, upper->level, &slot); @@ -2737,7 +2737,7 @@ static int relocate_tree_block(struct btrfs_trans_handle *trans, } else { path->lowest_level = node->level; ret = btrfs_search_slot(trans, root, key, path, 0, 1); - btrfs_release_path(root, path); + btrfs_release_path(path); if (ret > 0) ret = 0; } @@ -3119,7 +3119,7 @@ static int add_tree_block(struct reloc_control *rc, #endif } - btrfs_release_path(rc->extent_root, path); + btrfs_release_path(path); BUG_ON(level == -1); @@ -3505,7 +3505,7 @@ int add_data_references(struct reloc_control *rc, } path->slots[0]++; } - btrfs_release_path(rc->extent_root, path); + btrfs_release_path(path); if (err) free_block_list(blocks); return err; @@ -3568,7 +3568,7 @@ next: EXTENT_DIRTY); if (ret == 0 && start <= key.objectid) { - btrfs_release_path(rc->extent_root, path); + btrfs_release_path(path); rc->search_start = end + 1; } else { rc->search_start = key.objectid + key.offset; @@ -3576,7 +3576,7 @@ next: return 0; } } - btrfs_release_path(rc->extent_root, path); + btrfs_release_path(path); return ret; } @@ -3713,7 +3713,7 @@ restart: flags = BTRFS_EXTENT_FLAG_DATA; if (path_change) { - btrfs_release_path(rc->extent_root, path); + btrfs_release_path(path); path->search_commit_root = 1; path->skip_locking = 1; @@ -3736,7 +3736,7 @@ restart: (flags & BTRFS_EXTENT_FLAG_DATA)) { ret = add_data_references(rc, &key, path, &blocks); } else { - btrfs_release_path(rc->extent_root, path); + btrfs_release_path(path); ret = 0; } if (ret < 0) { @@ -3799,7 +3799,7 @@ restart: } } - btrfs_release_path(rc->extent_root, path); + btrfs_release_path(path); clear_extent_bits(&rc->processed_blocks, 0, (u64)-1, EXTENT_DIRTY, GFP_NOFS); @@ -3867,7 +3867,7 @@ static int __insert_orphan_inode(struct btrfs_trans_handle *trans, btrfs_set_inode_flags(leaf, item, BTRFS_INODE_NOCOMPRESS | BTRFS_INODE_PREALLOC); btrfs_mark_buffer_dirty(leaf); - btrfs_release_path(root, path); + btrfs_release_path(path); out: btrfs_free_path(path); return ret; @@ -4109,7 +4109,7 @@ int btrfs_recover_relocation(struct btrfs_root *root) } leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); - btrfs_release_path(root->fs_info->tree_root, path); + btrfs_release_path(path); if (key.objectid != BTRFS_TREE_RELOC_OBJECTID || key.type != BTRFS_ROOT_ITEM_KEY) @@ -4141,7 +4141,7 @@ int btrfs_recover_relocation(struct btrfs_root *root) key.offset--; } - btrfs_release_path(root->fs_info->tree_root, path); + btrfs_release_path(path); if (list_empty(&reloc_roots)) goto out; diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 6928bff62daa..59a94c1d9815 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -57,7 +57,7 @@ again: btrfs_item_key_to_cpu(path->nodes[0], &search_key, path->slots[0]); if (search_key.type != BTRFS_ROOT_ITEM_KEY) { search_key.offset++; - btrfs_release_path(root, path); + btrfs_release_path(path); goto again; } ret = 0; @@ -230,7 +230,7 @@ again: memcpy(&found_key, &key, sizeof(key)); key.offset++; - btrfs_release_path(root, path); + btrfs_release_path(path); dead_root = btrfs_read_fs_root_no_radix(root->fs_info->tree_root, &found_key); @@ -292,7 +292,7 @@ int btrfs_find_orphan_roots(struct btrfs_root *tree_root) } btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); - btrfs_release_path(tree_root, path); + btrfs_release_path(path); if (key.objectid != BTRFS_ORPHAN_OBJECTID || key.type != BTRFS_ORPHAN_ITEM_KEY) @@ -390,7 +390,7 @@ again: err = -ENOENT; if (key.type == BTRFS_ROOT_BACKREF_KEY) { - btrfs_release_path(tree_root, path); + btrfs_release_path(path); key.objectid = ref_id; key.type = BTRFS_ROOT_REF_KEY; key.offset = root_id; @@ -463,7 +463,7 @@ again: btrfs_mark_buffer_dirty(leaf); if (key.type == BTRFS_ROOT_BACKREF_KEY) { - btrfs_release_path(tree_root, path); + btrfs_release_path(path); key.objectid = ref_id; key.type = BTRFS_ROOT_REF_KEY; key.offset = root_id; diff --git a/fs/btrfs/tree-defrag.c b/fs/btrfs/tree-defrag.c index 992ab425599d..3b580ee8ab1d 100644 --- a/fs/btrfs/tree-defrag.c +++ b/fs/btrfs/tree-defrag.c @@ -97,7 +97,7 @@ int btrfs_defrag_leaves(struct btrfs_trans_handle *trans, ret = 0; goto out; } - btrfs_release_path(root, path); + btrfs_release_path(path); wret = btrfs_search_slot(trans, root, &key, path, 0, 1); if (wret < 0) { diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index d5313d63f967..c599e8c2a53c 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -333,13 +333,13 @@ static noinline int overwrite_item(struct btrfs_trans_handle *trans, goto insert; if (item_size == 0) { - btrfs_release_path(root, path); + btrfs_release_path(path); return 0; } dst_copy = kmalloc(item_size, GFP_NOFS); src_copy = kmalloc(item_size, GFP_NOFS); if (!dst_copy || !src_copy) { - btrfs_release_path(root, path); + btrfs_release_path(path); kfree(dst_copy); kfree(src_copy); return -ENOMEM; @@ -361,13 +361,13 @@ static noinline int overwrite_item(struct btrfs_trans_handle *trans, * sync */ if (ret == 0) { - btrfs_release_path(root, path); + btrfs_release_path(path); return 0; } } insert: - btrfs_release_path(root, path); + btrfs_release_path(path); /* try to insert the key into the destination tree */ ret = btrfs_insert_empty_item(trans, root, path, key, item_size); @@ -438,7 +438,7 @@ insert: } no_copy: btrfs_mark_buffer_dirty(path->nodes[0]); - btrfs_release_path(root, path); + btrfs_release_path(path); return 0; } @@ -544,11 +544,11 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, * we don't have to do anything */ if (memcmp(&cmp1, &cmp2, sizeof(cmp1)) == 0) { - btrfs_release_path(root, path); + btrfs_release_path(path); goto out; } } - btrfs_release_path(root, path); + btrfs_release_path(path); saved_nbytes = inode_get_bytes(inode); /* drop any overlapping extents */ @@ -600,7 +600,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, key->objectid, offset, &ins); BUG_ON(ret); } - btrfs_release_path(root, path); + btrfs_release_path(path); if (btrfs_file_extent_compression(eb, item)) { csum_start = ins.objectid; @@ -629,7 +629,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, kfree(sums); } } else { - btrfs_release_path(root, path); + btrfs_release_path(path); } } else if (found_type == BTRFS_FILE_EXTENT_INLINE) { /* inline extents are easy, we just overwrite them */ @@ -675,7 +675,7 @@ static noinline int drop_one_dir_item(struct btrfs_trans_handle *trans, return -ENOMEM; read_extent_buffer(leaf, name, (unsigned long)(di + 1), name_len); - btrfs_release_path(root, path); + btrfs_release_path(path); inode = read_one_inode(root, location.objectid); BUG_ON(!inode); @@ -713,7 +713,7 @@ static noinline int inode_in_dir(struct btrfs_root *root, goto out; } else goto out; - btrfs_release_path(root, path); + btrfs_release_path(path); di = btrfs_lookup_dir_item(NULL, root, path, dirid, name, name_len, 0); if (di && !IS_ERR(di)) { @@ -724,7 +724,7 @@ static noinline int inode_in_dir(struct btrfs_root *root, goto out; match = 1; out: - btrfs_release_path(root, path); + btrfs_release_path(path); return match; } @@ -884,7 +884,7 @@ again: if (!backref_in_log(log, key, victim_name, victim_name_len)) { btrfs_inc_nlink(inode); - btrfs_release_path(root, path); + btrfs_release_path(path); ret = btrfs_unlink_inode(trans, root, dir, inode, victim_name, @@ -901,7 +901,7 @@ again: */ search_done = 1; } - btrfs_release_path(root, path); + btrfs_release_path(path); insert: /* insert our name */ @@ -922,7 +922,7 @@ out: BUG_ON(ret); out_nowrite: - btrfs_release_path(root, path); + btrfs_release_path(path); iput(dir); iput(inode); return 0; @@ -999,9 +999,9 @@ static noinline int fixup_inode_link_count(struct btrfs_trans_handle *trans, if (key.offset == 0) break; key.offset--; - btrfs_release_path(root, path); + btrfs_release_path(path); } - btrfs_release_path(root, path); + btrfs_release_path(path); if (nlink != inode->i_nlink) { inode->i_nlink = nlink; btrfs_update_inode(trans, root, inode); @@ -1052,7 +1052,7 @@ static noinline int fixup_inode_link_counts(struct btrfs_trans_handle *trans, ret = btrfs_del_item(trans, root, path); BUG_ON(ret); - btrfs_release_path(root, path); + btrfs_release_path(path); inode = read_one_inode(root, key.offset); BUG_ON(!inode); @@ -1068,7 +1068,7 @@ static noinline int fixup_inode_link_counts(struct btrfs_trans_handle *trans, */ key.offset = (u64)-1; } - btrfs_release_path(root, path); + btrfs_release_path(path); return 0; } @@ -1096,7 +1096,7 @@ static noinline int link_to_fixup_dir(struct btrfs_trans_handle *trans, ret = btrfs_insert_empty_item(trans, root, path, &key, 0); - btrfs_release_path(root, path); + btrfs_release_path(path); if (ret == 0) { btrfs_inc_nlink(inode); btrfs_update_inode(trans, root, inode); @@ -1192,7 +1192,7 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, exists = 1; else exists = 0; - btrfs_release_path(root, path); + btrfs_release_path(path); if (key->type == BTRFS_DIR_ITEM_KEY) { dst_di = btrfs_lookup_dir_item(trans, root, path, key->objectid, @@ -1236,13 +1236,13 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, if (key->type == BTRFS_DIR_INDEX_KEY) goto insert; out: - btrfs_release_path(root, path); + btrfs_release_path(path); kfree(name); iput(dir); return 0; insert: - btrfs_release_path(root, path); + btrfs_release_path(path); ret = insert_one_name(trans, root, path, key->objectid, key->offset, name, name_len, log_type, &log_key); @@ -1363,7 +1363,7 @@ next: *end_ret = found_end; ret = 0; out: - btrfs_release_path(root, path); + btrfs_release_path(path); return ret; } @@ -1428,8 +1428,8 @@ again: } if (IS_ERR_OR_NULL(log_di)) { btrfs_dir_item_key_to_cpu(eb, di, &location); - btrfs_release_path(root, path); - btrfs_release_path(log, log_path); + btrfs_release_path(path); + btrfs_release_path(log_path); inode = read_one_inode(root, location.objectid); BUG_ON(!inode); @@ -1453,7 +1453,7 @@ again: ret = 0; goto out; } - btrfs_release_path(log, log_path); + btrfs_release_path(log_path); kfree(name); ptr = (unsigned long)(di + 1); @@ -1461,8 +1461,8 @@ again: } ret = 0; out: - btrfs_release_path(root, path); - btrfs_release_path(log, log_path); + btrfs_release_path(path); + btrfs_release_path(log_path); return ret; } @@ -1550,7 +1550,7 @@ again: break; dir_key.offset = found_key.offset + 1; } - btrfs_release_path(root, path); + btrfs_release_path(path); if (range_end == (u64)-1) break; range_start = range_end + 1; @@ -1561,11 +1561,11 @@ next_type: if (key_type == BTRFS_DIR_LOG_ITEM_KEY) { key_type = BTRFS_DIR_LOG_INDEX_KEY; dir_key.type = BTRFS_DIR_INDEX_KEY; - btrfs_release_path(root, path); + btrfs_release_path(path); goto again; } out: - btrfs_release_path(root, path); + btrfs_release_path(path); btrfs_free_path(log_path); iput(dir); return ret; @@ -2225,7 +2225,7 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans, bytes_del += name_len; BUG_ON(ret); } - btrfs_release_path(log, path); + btrfs_release_path(path); di = btrfs_lookup_dir_index_item(trans, log, path, dir->i_ino, index, name, name_len, -1); if (IS_ERR(di)) { @@ -2247,7 +2247,7 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans, key.objectid = dir->i_ino; key.offset = 0; key.type = BTRFS_INODE_ITEM_KEY; - btrfs_release_path(log, path); + btrfs_release_path(path); ret = btrfs_search_slot(trans, log, &key, path, 0, 1); if (ret < 0) { @@ -2269,7 +2269,7 @@ int btrfs_del_dir_entries_in_log(struct btrfs_trans_handle *trans, btrfs_mark_buffer_dirty(path->nodes[0]); } else ret = 0; - btrfs_release_path(log, path); + btrfs_release_path(path); } fail: btrfs_free_path(path); @@ -2344,7 +2344,7 @@ static noinline int insert_dir_log_key(struct btrfs_trans_handle *trans, struct btrfs_dir_log_item); btrfs_set_dir_log_end(path->nodes[0], item, last_offset); btrfs_mark_buffer_dirty(path->nodes[0]); - btrfs_release_path(log, path); + btrfs_release_path(path); return 0; } @@ -2393,10 +2393,10 @@ static noinline int log_dir_items(struct btrfs_trans_handle *trans, min_key.objectid = inode->i_ino; min_key.type = key_type; min_key.offset = (u64)-1; - btrfs_release_path(root, path); + btrfs_release_path(path); ret = btrfs_search_slot(NULL, root, &min_key, path, 0, 0); if (ret < 0) { - btrfs_release_path(root, path); + btrfs_release_path(path); return ret; } ret = btrfs_previous_item(root, path, inode->i_ino, key_type); @@ -2432,7 +2432,7 @@ static noinline int log_dir_items(struct btrfs_trans_handle *trans, } } } - btrfs_release_path(root, path); + btrfs_release_path(path); /* find the first key from this transaction again */ ret = btrfs_search_slot(NULL, root, &min_key, path, 0, 0); @@ -2490,8 +2490,8 @@ static noinline int log_dir_items(struct btrfs_trans_handle *trans, } } done: - btrfs_release_path(root, path); - btrfs_release_path(log, dst_path); + btrfs_release_path(path); + btrfs_release_path(dst_path); if (err == 0) { *last_offset_ret = last_offset; @@ -2588,9 +2588,9 @@ static int drop_objectid_items(struct btrfs_trans_handle *trans, ret = btrfs_del_item(trans, log, path); BUG_ON(ret); - btrfs_release_path(log, path); + btrfs_release_path(path); } - btrfs_release_path(log, path); + btrfs_release_path(path); return ret; } @@ -2696,7 +2696,7 @@ static noinline int copy_items(struct btrfs_trans_handle *trans, } btrfs_mark_buffer_dirty(dst_path->nodes[0]); - btrfs_release_path(log, dst_path); + btrfs_release_path(dst_path); kfree(ins_data); /* @@ -2845,7 +2845,7 @@ next_slot: } ins_nr = 0; } - btrfs_release_path(root, path); + btrfs_release_path(path); if (min_key.offset < (u64)-1) min_key.offset++; @@ -2868,8 +2868,8 @@ next_slot: } WARN_ON(ins_nr); if (inode_only == LOG_INODE_ALL && S_ISDIR(inode->i_mode)) { - btrfs_release_path(root, path); - btrfs_release_path(log, dst_path); + btrfs_release_path(path); + btrfs_release_path(dst_path); ret = log_directory_changes(trans, root, inode, path, dst_path); if (ret) { err = ret; @@ -3136,7 +3136,7 @@ again: } btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]); - btrfs_release_path(log_root_tree, path); + btrfs_release_path(path); if (found_key.objectid != BTRFS_TREE_LOG_OBJECTID) break; @@ -3171,7 +3171,7 @@ again: if (found_key.offset == 0) break; } - btrfs_release_path(log_root_tree, path); + btrfs_release_path(path); /* step one is to pin it all, step two is to replay just inodes */ if (wc.pin) { diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 76acd1d235e4..e21130d3f98a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1475,7 +1475,7 @@ next_slot: goto error; leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); - btrfs_release_path(root, path); + btrfs_release_path(path); continue; } @@ -1947,7 +1947,7 @@ again: chunk = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_chunk); chunk_type = btrfs_chunk_type(leaf, chunk); - btrfs_release_path(chunk_root, path); + btrfs_release_path(path); if (chunk_type & BTRFS_BLOCK_GROUP_SYSTEM) { ret = btrfs_relocate_chunk(chunk_root, chunk_tree, @@ -2065,7 +2065,7 @@ int btrfs_balance(struct btrfs_root *dev_root) if (found_key.offset == 0) break; - btrfs_release_path(chunk_root, path); + btrfs_release_path(path); ret = btrfs_relocate_chunk(chunk_root, chunk_root->root_key.objectid, found_key.objectid, @@ -2137,7 +2137,7 @@ again: goto done; if (ret) { ret = 0; - btrfs_release_path(root, path); + btrfs_release_path(path); break; } @@ -2146,7 +2146,7 @@ again: btrfs_item_key_to_cpu(l, &key, path->slots[0]); if (key.objectid != device->devid) { - btrfs_release_path(root, path); + btrfs_release_path(path); break; } @@ -2154,14 +2154,14 @@ again: length = btrfs_dev_extent_length(l, dev_extent); if (key.offset + length <= new_size) { - btrfs_release_path(root, path); + btrfs_release_path(path); break; } chunk_tree = btrfs_dev_extent_chunk_tree(l, dev_extent); chunk_objectid = btrfs_dev_extent_chunk_objectid(l, dev_extent); chunk_offset = btrfs_dev_extent_chunk_offset(l, dev_extent); - btrfs_release_path(root, path); + btrfs_release_path(path); ret = btrfs_relocate_chunk(root, chunk_tree, chunk_objectid, chunk_offset); @@ -3813,7 +3813,7 @@ again: } if (key.objectid == BTRFS_DEV_ITEMS_OBJECTID) { key.objectid = 0; - btrfs_release_path(root, path); + btrfs_release_path(path); goto again; } ret = 0; diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c index cfd660550ded..4ca88d1e18e2 100644 --- a/fs/btrfs/xattr.c +++ b/fs/btrfs/xattr.c @@ -120,13 +120,13 @@ static int do_setxattr(struct btrfs_trans_handle *trans, ret = btrfs_delete_one_dir_name(trans, root, path, di); BUG_ON(ret); - btrfs_release_path(root, path); + btrfs_release_path(path); /* if we don't have a value then we are removing the xattr */ if (!value) goto out; } else { - btrfs_release_path(root, path); + btrfs_release_path(path); if (flags & XATTR_REPLACE) { /* we couldn't find the attr to replace */ -- cgit v1.2.3 From 8cc33e5c19bf01c7617608669be8c1b4f663eb2f Mon Sep 17 00:00:00 2001 From: David Sterba Date: Mon, 2 May 2011 15:29:25 +0200 Subject: btrfs: Document a mutex lock/unlock sequence --- fs/btrfs/extent-tree.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index a160f11465f8..fba1348cb2a0 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -756,6 +756,10 @@ again: btrfs_release_path(path); + /* + * Mutex was contended, block until it's released and try + * again + */ mutex_lock(&head->mutex); mutex_unlock(&head->mutex); btrfs_put_delayed_ref(&head->node); @@ -2297,6 +2301,10 @@ again: atomic_inc(&ref->refs); spin_unlock(&delayed_refs->lock); + /* + * Mutex was contended, block until it's + * released and try again + */ mutex_lock(&head->mutex); mutex_unlock(&head->mutex); @@ -2363,6 +2371,10 @@ static noinline int check_delayed_ref(struct btrfs_trans_handle *trans, btrfs_release_path(path); + /* + * Mutex was contended, block until it's released and let + * caller try again + */ mutex_lock(&head->mutex); mutex_unlock(&head->mutex); btrfs_put_delayed_ref(&head->node); -- cgit v1.2.3 From 621496f4fd56195b7b273521f467c2945165481f Mon Sep 17 00:00:00 2001 From: David Sterba Date: Wed, 4 May 2011 12:56:49 +0200 Subject: btrfs: remove unused function prototypes function prototypes without a body Signed-off-by: David Sterba --- fs/btrfs/ctree.h | 12 ------------ fs/btrfs/delayed-ref.h | 5 ----- fs/btrfs/disk-io.h | 11 ----------- fs/btrfs/extent_io.h | 9 --------- fs/btrfs/transaction.h | 3 --- fs/btrfs/tree-log.h | 1 - fs/btrfs/volumes.h | 2 -- 7 files changed, 43 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 3f301f05099d..b66216e636c2 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2108,12 +2108,9 @@ int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans, u64 num_bytes, u64 *refs, u64 *flags); int btrfs_pin_extent(struct btrfs_root *root, u64 bytenr, u64 num, int reserved); -int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans, - struct btrfs_root *root, struct extent_buffer *leaf); int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans, struct btrfs_root *root, u64 objectid, u64 offset, u64 bytenr); -int btrfs_copy_pinned(struct btrfs_root *root, struct extent_io_tree *copy); struct btrfs_block_group_cache *btrfs_lookup_block_group( struct btrfs_fs_info *info, u64 bytenr); @@ -2463,15 +2460,10 @@ int btrfs_csum_file_blocks(struct btrfs_trans_handle *trans, struct btrfs_ordered_sum *sums); int btrfs_csum_one_bio(struct btrfs_root *root, struct inode *inode, struct bio *bio, u64 file_start, int contig); -int btrfs_csum_file_bytes(struct btrfs_root *root, struct inode *inode, - u64 start, unsigned long len); struct btrfs_csum_item *btrfs_lookup_csum(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_path *path, u64 bytenr, int cow); -int btrfs_csum_truncate(struct btrfs_trans_handle *trans, - struct btrfs_root *root, struct btrfs_path *path, - u64 isize); int btrfs_lookup_csums_range(struct btrfs_root *root, u64 start, u64 end, struct list_head *list); /* inode.c */ @@ -2520,7 +2512,6 @@ unsigned long btrfs_force_ra(struct address_space *mapping, int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf); int btrfs_readpage(struct file *file, struct page *page); void btrfs_evict_inode(struct inode *inode); -void btrfs_put_inode(struct inode *inode); int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc); void btrfs_dirty_inode(struct inode *inode); struct inode *btrfs_alloc_inode(struct super_block *sb); @@ -2531,8 +2522,6 @@ void btrfs_destroy_cachep(void); long btrfs_ioctl_trans_end(struct file *file); struct inode *btrfs_iget(struct super_block *s, struct btrfs_key *location, struct btrfs_root *root, int *was_new); -int btrfs_commit_write(struct file *file, struct page *page, - unsigned from, unsigned to); struct extent_map *btrfs_get_extent(struct inode *inode, struct page *page, size_t pg_offset, u64 start, u64 end, int create); @@ -2571,7 +2560,6 @@ void btrfs_inherit_iflags(struct inode *inode, struct inode *dir); int btrfs_sync_file(struct file *file, int datasync); int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end, int skip_pinned); -int btrfs_check_file(struct btrfs_root *root, struct inode *inode); extern const struct file_operations btrfs_file_operations; int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct inode *inode, u64 start, u64 end, u64 *hint_byte, int drop_cache); diff --git a/fs/btrfs/delayed-ref.h b/fs/btrfs/delayed-ref.h index 50e3cf92fbda..946ed71ab84f 100644 --- a/fs/btrfs/delayed-ref.h +++ b/fs/btrfs/delayed-ref.h @@ -167,11 +167,6 @@ int btrfs_add_delayed_extent_op(struct btrfs_trans_handle *trans, struct btrfs_delayed_ref_head * btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr); int btrfs_delayed_ref_pending(struct btrfs_trans_handle *trans, u64 bytenr); -int btrfs_update_delayed_ref(struct btrfs_trans_handle *trans, - u64 bytenr, u64 num_bytes, u64 orig_parent, - u64 parent, u64 orig_ref_root, u64 ref_root, - u64 orig_ref_generation, u64 ref_generation, - u64 owner_objectid, int pin); int btrfs_delayed_ref_lock(struct btrfs_trans_handle *trans, struct btrfs_delayed_ref_head *head); int btrfs_find_ref_cluster(struct btrfs_trans_handle *trans, diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h index 07b20dc2fd95..758f3ca614ee 100644 --- a/fs/btrfs/disk-io.h +++ b/fs/btrfs/disk-io.h @@ -65,25 +65,14 @@ struct btrfs_root *btrfs_read_fs_root_no_radix(struct btrfs_root *tree_root, struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, struct btrfs_key *location); int btrfs_cleanup_fs_roots(struct btrfs_fs_info *fs_info); -int btrfs_insert_dev_radix(struct btrfs_root *root, - struct block_device *bdev, - u64 device_id, - u64 block_start, - u64 num_blocks); void btrfs_btree_balance_dirty(struct btrfs_root *root, unsigned long nr); int btrfs_free_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root); void btrfs_mark_buffer_dirty(struct extent_buffer *buf); -void btrfs_mark_buffer_dirty_nonblocking(struct extent_buffer *buf); int btrfs_buffer_uptodate(struct extent_buffer *buf, u64 parent_transid); int btrfs_set_buffer_uptodate(struct extent_buffer *buf); -int wait_on_tree_block_writeback(struct btrfs_root *root, - struct extent_buffer *buf); int btrfs_read_buffer(struct extent_buffer *buf, u64 parent_transid); u32 btrfs_csum_data(struct btrfs_root *root, char *data, u32 seed, size_t len); void btrfs_csum_final(u32 crc, char *result); -int btrfs_open_device(struct btrfs_device *dev); -int btrfs_verify_block_csum(struct btrfs_root *root, - struct extent_buffer *buf); int btrfs_bio_wq_end_io(struct btrfs_fs_info *info, struct bio *bio, int metadata); int btrfs_wq_submit_bio(struct btrfs_fs_info *fs_info, struct inode *inode, diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index 3c3be74c934e..d1c5a57c9984 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -215,14 +215,8 @@ int set_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask); int clear_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask); -int clear_extent_ordered(struct extent_io_tree *tree, u64 start, u64 end, - gfp_t mask); -int clear_extent_ordered_metadata(struct extent_io_tree *tree, u64 start, - u64 end, gfp_t mask); int set_extent_delalloc(struct extent_io_tree *tree, u64 start, u64 end, struct extent_state **cached_state, gfp_t mask); -int set_extent_ordered(struct extent_io_tree *tree, u64 start, u64 end, - gfp_t mask); int find_first_extent_bit(struct extent_io_tree *tree, u64 start, u64 *start_ret, u64 *end_ret, int bits); struct extent_state *find_first_extent_bit_state(struct extent_io_tree *tree, @@ -298,8 +292,6 @@ int clear_extent_buffer_dirty(struct extent_io_tree *tree, struct extent_buffer *eb); int set_extent_buffer_dirty(struct extent_io_tree *tree, struct extent_buffer *eb); -int test_extent_buffer_dirty(struct extent_io_tree *tree, - struct extent_buffer *eb); int set_extent_buffer_uptodate(struct extent_io_tree *tree, struct extent_buffer *eb); int clear_extent_buffer_uptodate(struct extent_io_tree *tree, @@ -317,7 +309,6 @@ int map_private_extent_buffer(struct extent_buffer *eb, unsigned long offset, unsigned long *map_start, unsigned long *map_len, int km); void unmap_extent_buffer(struct extent_buffer *eb, char *token, int km); -int release_extent_buffer_tail_pages(struct extent_buffer *eb); int extent_range_uptodate(struct extent_io_tree *tree, u64 start, u64 end); int extent_clear_unlock_delalloc(struct inode *inode, diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index e441acc6c584..000a41008c3b 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -101,11 +101,8 @@ struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r, int btrfs_wait_for_commit(struct btrfs_root *root, u64 transid); int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans, struct btrfs_root *root); -int btrfs_commit_tree_roots(struct btrfs_trans_handle *trans, - struct btrfs_root *root); int btrfs_add_dead_root(struct btrfs_root *root); -int btrfs_drop_dead_root(struct btrfs_root *root); int btrfs_defrag_root(struct btrfs_root *root, int cacheonly); int btrfs_clean_old_snapshots(struct btrfs_root *root); int btrfs_commit_transaction(struct btrfs_trans_handle *trans, diff --git a/fs/btrfs/tree-log.h b/fs/btrfs/tree-log.h index 3dfae84c8cc8..2270ac58d746 100644 --- a/fs/btrfs/tree-log.h +++ b/fs/btrfs/tree-log.h @@ -38,7 +38,6 @@ int btrfs_del_inode_ref_in_log(struct btrfs_trans_handle *trans, struct btrfs_root *root, const char *name, int name_len, struct inode *inode, u64 dirid); -int btrfs_join_running_log_trans(struct btrfs_root *root); int btrfs_end_log_trans(struct btrfs_root *root); int btrfs_pin_log_trans(struct btrfs_root *root); int btrfs_log_inode_parent(struct btrfs_trans_handle *trans, diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index cc2eadaf7a27..036b276b4860 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -209,8 +209,6 @@ int btrfs_add_device(struct btrfs_trans_handle *trans, int btrfs_rm_device(struct btrfs_root *root, char *device_path); int btrfs_cleanup_fs_uuids(void); int btrfs_num_copies(struct btrfs_mapping_tree *map_tree, u64 logical, u64 len); -int btrfs_unplug_page(struct btrfs_mapping_tree *map_tree, - u64 logical, struct page *page); int btrfs_grow_device(struct btrfs_trans_handle *trans, struct btrfs_device *device, u64 new_size); struct btrfs_device *btrfs_find_device(struct btrfs_root *root, u64 devid, -- cgit v1.2.3 From 3d73998558beac1e56efaaf7c5bf3469ee4c6ba2 Mon Sep 17 00:00:00 2001 From: Jaecheol Lee Date: Wed, 16 Mar 2011 07:28:23 +0900 Subject: ARM: EXYNOS4: CPUIDLE Support This patch supports cpuidle framework for EXYNOS4210. Currently, Only one idle state is possible to use, but more idle states can be added following by this patch. Signed-off-by: Jaecheol Lee Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/Makefile | 1 + arch/arm/mach-exynos4/cpuidle.c | 86 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 87 insertions(+) create mode 100644 arch/arm/mach-exynos4/cpuidle.c diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index 9be104f63c0b..de197d6648a2 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos4/cpuidle.c new file mode 100644 index 000000000000..bf7e96f2793a --- /dev/null +++ b/arch/arm/mach-exynos4/cpuidle.c @@ -0,0 +1,86 @@ +/* linux/arch/arm/mach-exynos4/cpuidle.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include + +static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state); + +static struct cpuidle_state exynos4_cpuidle_set[] = { + [0] = { + .enter = exynos4_enter_idle, + .exit_latency = 1, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IDLE", + .desc = "ARM clock gating(WFI)", + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); + +static struct cpuidle_driver exynos4_idle_driver = { + .name = "exynos4_idle", + .owner = THIS_MODULE, +}; + +static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + + cpu_do_idle(); + + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + + return idle_time; +} + +static int __init exynos4_init_cpuidle(void) +{ + int i, max_cpuidle_state, cpu_id; + struct cpuidle_device *device; + + cpuidle_register_driver(&exynos4_idle_driver); + + for_each_cpu(cpu_id, cpu_online_mask) { + device = &per_cpu(exynos4_cpuidle_device, cpu_id); + device->cpu = cpu_id; + + device->state_count = (sizeof(exynos4_cpuidle_set) / + sizeof(struct cpuidle_state)); + + max_cpuidle_state = device->state_count; + + for (i = 0; i < max_cpuidle_state; i++) { + memcpy(&device->states[i], &exynos4_cpuidle_set[i], + sizeof(struct cpuidle_state)); + } + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "CPUidle register device failed\n,"); + return -EIO; + } + } + return 0; +} +device_initcall(exynos4_init_cpuidle); -- cgit v1.2.3 From 3260ecd859ba842c709f205cbc01408b826bb387 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Wed, 23 Mar 2011 15:25:14 +0900 Subject: ARM: EXYNOS4: Add Atmel mXT touchscreen device to the NURI board This patch is to support Atmel mXT touchscreen device to the NURI board. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos4/Kconfig | 2 + arch/arm/mach-exynos4/mach-nuri.c | 89 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 91 insertions(+) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index e849f67be47d..11b57a4d53fa 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -169,8 +169,10 @@ config MACH_NURI select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 + select S3C_DEV_I2C3 select S3C_DEV_I2C5 select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI select SAMSUNG_DEV_PWM diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index b79ad010d194..d13c5e81c6a4 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -30,6 +31,8 @@ #include #include #include +#include +#include #include @@ -257,6 +260,88 @@ static struct i2c_board_info i2c1_devs[] __initdata = { /* Gyro, To be updated */ }; +/* TSP */ +static u8 mxt_init_vals[] = { + /* MXT_GEN_COMMAND(6) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_GEN_POWER(7) */ + 0x20, 0xff, 0x32, + /* MXT_GEN_ACQUIRE(8) */ + 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, + /* MXT_TOUCH_MULTI(9) */ + 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, + /* MXT_TOUCH_KEYARRAY(15) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, + /* MXT_SPT_GPIOPWM(19) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_GRIPFACE(20) */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, + 0x0f, 0x0a, + /* MXT_PROCG_NOISE(22) */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, + 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, + /* MXT_TOUCH_PROXIMITY(23) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_ONETOUCH(24) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_SPT_SELFTEST(25) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_TWOTOUCH(27) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_SPT_CTECONFIG(28) */ + 0x00, 0x00, 0x02, 0x08, 0x10, 0x00, +}; + +static struct mxt_platform_data mxt_platform_data = { + .config = mxt_init_vals, + .config_length = ARRAY_SIZE(mxt_init_vals), + + .x_line = 18, + .y_line = 11, + .x_size = 1024, + .y_size = 600, + .blen = 0x1, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = MXT_DIAGONAL_COUNTER, + .irqflags = IRQF_TRIGGER_FALLING, +}; + +static struct s3c2410_platform_i2c i2c3_data __initdata = { + .flags = 0, + .bus_num = 3, + .slave_addr = 0x10, + .frequency = 400 * 1000, + .sda_delay = 100, +}; + +static struct i2c_board_info i2c3_devs[] __initdata = { + { + I2C_BOARD_INFO("atmel_mxt_ts", 0x4a), + .platform_data = &mxt_platform_data, + .irq = IRQ_EINT(4), + }, +}; + +static void __init nuri_tsp_init(void) +{ + int gpio; + + /* TOUCH_INT: XEINT_4 */ + gpio = EXYNOS4_GPX0(4); + gpio_request(gpio, "TOUCH_INT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); +} + /* GPIO I2C 5 (PMIC) */ static struct i2c_board_info i2c5_devs[] __initdata = { /* max8997, To be updated */ @@ -270,6 +355,7 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_hsmmc3, &s3c_device_wdt, &s3c_device_timer[0], + &s3c_device_i2c3, /* NURI Devices */ &nuri_gpio_keys, @@ -287,8 +373,11 @@ static void __init nuri_map_io(void) static void __init nuri_machine_init(void) { nuri_sdhci_init(); + nuri_tsp_init(); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + s3c_i2c3_set_platdata(&i2c3_data); + i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); /* Last */ -- cgit v1.2.3 From 14587b8d4be652fccc8e0e82ae9baa4365b06d9b Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 25 Mar 2011 10:30:08 +0900 Subject: ARM: exynos4_defconfig: Update for adding machines This patch adds MACH_ARMLEX4210 and MACH_NURI in exynos4_defconfig. Signed-off-by: Kukjin Kim --- arch/arm/configs/exynos4_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index 2ffba24d2e2a..da53ff3b4d70 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -8,7 +8,9 @@ CONFIG_ARCH_EXYNOS4=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDKC210=y CONFIG_MACH_SMDKV310=y +CONFIG_MACH_ARMLEX4210=y CONFIG_MACH_UNIVERSAL_C210=y +CONFIG_MACH_NURI=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y -- cgit v1.2.3 From 3185847957d4834d1b30b253b1c71bb05bad7265 Mon Sep 17 00:00:00 2001 From: Joonyoung Shim Date: Fri, 6 May 2011 09:37:17 +0900 Subject: ARM: S3C64XX: Remove gpio-bank-X header files The gpio-bank-X header files of S3C64XX have definitions which can be substituted by other common GPIO API. Signed-off-by: Joonyoung Shim Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/dev-spi.c | 20 +++---- arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h | 48 --------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h | 60 ------------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h | 53 ----------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h | 49 ---------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h | 44 -------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h | 71 ----------------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h | 42 -------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h | 74 ------------------------ arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h | 40 ------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h | 36 ------------ arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h | 54 ----------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h | 70 ---------------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h | 69 ---------------------- arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h | 46 --------------- arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 - arch/arm/mach-s3c64xx/pm.c | 34 ++++++----- arch/arm/mach-s3c64xx/setup-i2c0.c | 7 +-- arch/arm/mach-s3c64xx/setup-i2c1.c | 7 +-- arch/arm/mach-s3c64xx/sleep.S | 8 ++- 20 files changed, 37 insertions(+), 796 deletions(-) delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 405e62128917..82db072cb836 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -16,7 +16,6 @@ #include #include -#include #include #include @@ -40,23 +39,15 @@ static char *spi_src_clks[] = { */ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0); - s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO); - s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO); - s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP); + base = S3C64XX_GPC(0); break; case 1: - s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1); - s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1); - s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1); - s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP); + base = S3C64XX_GPC(4); break; default: @@ -64,6 +55,9 @@ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgall_range(base, 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; } diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h deleted file mode 100644 index 34212e1a7e81..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank A register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00) -#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04) -#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08) -#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c) -#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10) - -#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0) -#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0) - -#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4) -#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4) - -#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8) -#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8) - -#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12) -#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12) - -#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16) -#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16) - -#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20) -#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20) - -#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24) -#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24) - -#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28) -#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h deleted file mode 100644 index 7232c037e642..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank B register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00) -#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04) -#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08) -#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c) -#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10) - -#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0) -#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0) -#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0) -#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0) -#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0) - -#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4) -#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4) -#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4) -#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4) -#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4) - -#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8) -#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8) -#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8) -#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8) -#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8) -#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8) - -#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12) -#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12) -#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12) -#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12) -#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12) - -#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16) -#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16) -#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16) -#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16) - -#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20) -#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20) - -#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24) -#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h deleted file mode 100644 index db189ab1639a..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank C register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00) -#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04) -#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08) -#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c) -#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10) - -#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0) -#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0) - -#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4) -#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4) - -#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8) -#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8) - -#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12) -#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12) - -#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16) -#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16) -#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16) -#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16) - -#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20) -#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20) -#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20) -#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20) - -#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24) -#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24) - -#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28) -#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28) -#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h deleted file mode 100644 index 1a01cee7aca3..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank D register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00) -#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04) -#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08) -#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c) -#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10) - -#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0) -#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0) -#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0) -#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0) - -#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4) -#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4) -#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4) -#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4) - -#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8) -#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8) -#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8) -#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8) - -#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12) -#define S3C64XX_GPD3_I2S0_DI (0x03 << 12) -#define S3C64XX_GPD3_AC97_SDI (0x04 << 12) -#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12) - -#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16) -#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16) -#define S3C64XX_GPD4_AC97_SDO (0x04 << 16) -#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h deleted file mode 100644 index f057adb627dd..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank E register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00) -#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04) -#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08) -#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c) -#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10) - -#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0) -#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0) -#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0) - -#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4) -#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4) -#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4) - -#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8) -#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8) -#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8) - -#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12) -#define S3C64XX_GPE3_I2S1_DI (0x03 << 12) -#define S3C64XX_GPE3_AC97_SDI (0x04 << 12) - -#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16) -#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16) -#define S3C64XX_GPE4_AC97_SDO (0x04 << 16) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h deleted file mode 100644 index 62ab8f5e7835..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h +++ /dev/null @@ -1,71 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank F register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00) -#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04) -#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08) -#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c) -#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10) - -#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0) -#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0) - -#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2) -#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2) - -#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4) -#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4) - -#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6) -#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6) - -#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8) -#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8) - -#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10) -#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10) - -#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12) -#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12) - -#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14) -#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14) - -#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16) -#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16) - -#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18) -#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18) - -#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20) -#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20) - -#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22) -#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22) - -#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24) -#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24) - -#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26) -#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26) - -#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28) -#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28) - -#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h deleted file mode 100644 index b94954af1598..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank G register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00) -#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04) -#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08) -#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c) -#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10) - -#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0) -#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0) - -#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4) -#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4) - -#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8) -#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8) - -#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12) -#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12) - -#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16) -#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16) - -#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20) -#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h deleted file mode 100644 index 5d75aaad865e..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h +++ /dev/null @@ -1,74 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank H register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00) -#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04) -#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08) -#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c) -#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10) -#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14) - -#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0) -#define S3C64XX_GPH0_KP_COL0 (0x04 << 0) -#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0) - -#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4) -#define S3C64XX_GPH1_KP_COL1 (0x04 << 4) -#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4) - -#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8) -#define S3C64XX_GPH2_KP_COL2 (0x04 << 8) -#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8) - -#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12) -#define S3C64XX_GPH3_KP_COL3 (0x04 << 12) -#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12) - -#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16) -#define S3C64XX_GPH4_KP_COL4 (0x04 << 16) -#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16) - -#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20) -#define S3C64XX_GPH5_KP_COL5 (0x04 << 20) -#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20) - -#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24) -#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24) -#define S3C64XX_GPH6_KP_COL6 (0x04 << 24) -#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24) -#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24) -#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24) - -#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28) -#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28) -#define S3C64XX_GPH7_KP_COL7 (0x04 << 28) -#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28) -#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) -#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) - -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) - -#define S3C64XX_GPH9_OUTPUT (0x01 << 4) -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h deleted file mode 100644 index 4ceaa6098bc7..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank I register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00) -#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04) -#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08) -#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c) -#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10) - -#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPI0_VD0 (0x02 << 0) -#define S3C64XX_GPI1_VD1 (0x02 << 2) -#define S3C64XX_GPI2_VD2 (0x02 << 4) -#define S3C64XX_GPI3_VD3 (0x02 << 6) -#define S3C64XX_GPI4_VD4 (0x02 << 8) -#define S3C64XX_GPI5_VD5 (0x02 << 10) -#define S3C64XX_GPI6_VD6 (0x02 << 12) -#define S3C64XX_GPI7_VD7 (0x02 << 14) -#define S3C64XX_GPI8_VD8 (0x02 << 16) -#define S3C64XX_GPI9_VD9 (0x02 << 18) -#define S3C64XX_GPI10_VD10 (0x02 << 20) -#define S3C64XX_GPI11_VD11 (0x02 << 22) -#define S3C64XX_GPI12_VD12 (0x02 << 24) -#define S3C64XX_GPI13_VD13 (0x02 << 26) -#define S3C64XX_GPI14_VD14 (0x02 << 28) -#define S3C64XX_GPI15_VD15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h deleted file mode 100644 index 6f25cd079a40..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank J register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00) -#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04) -#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08) -#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c) -#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10) - -#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPJ0_VD16 (0x02 << 0) -#define S3C64XX_GPJ1_VD17 (0x02 << 2) -#define S3C64XX_GPJ2_VD18 (0x02 << 4) -#define S3C64XX_GPJ3_VD19 (0x02 << 6) -#define S3C64XX_GPJ4_VD20 (0x02 << 8) -#define S3C64XX_GPJ5_VD21 (0x02 << 10) -#define S3C64XX_GPJ6_VD22 (0x02 << 12) -#define S3C64XX_GPJ7_VD23 (0x02 << 14) -#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16) -#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18) -#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20) -#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h deleted file mode 100644 index d0aeda1cd9de..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank N register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) -#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) -#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08) - -#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPN0_EINT0 (0x02 << 0) -#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0) - -#define S3C64XX_GPN1_EINT1 (0x02 << 2) -#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2) - -#define S3C64XX_GPN2_EINT2 (0x02 << 4) -#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4) - -#define S3C64XX_GPN3_EINT3 (0x02 << 6) -#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6) - -#define S3C64XX_GPN4_EINT4 (0x02 << 8) -#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8) - -#define S3C64XX_GPN5_EINT5 (0x02 << 10) -#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10) - -#define S3C64XX_GPN6_EINT6 (0x02 << 12) -#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12) - -#define S3C64XX_GPN7_EINT7 (0x02 << 14) -#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14) - -#define S3C64XX_GPN8_EINT8 (0x02 << 16) -#define S3C64XX_GPN9_EINT9 (0x02 << 18) -#define S3C64XX_GPN10_EINT10 (0x02 << 20) -#define S3C64XX_GPN11_EINT11 (0x02 << 22) -#define S3C64XX_GPN12_EINT12 (0x02 << 24) -#define S3C64XX_GPN13_EINT13 (0x02 << 26) -#define S3C64XX_GPN14_EINT14 (0x02 << 28) -#define S3C64XX_GPN15_EINT15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h deleted file mode 100644 index 21868fa102d0..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank O register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00) -#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04) -#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08) -#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c) -#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10) - -#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0) -#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0) - -#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2) -#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2) - -#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4) -#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4) - -#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6) -#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6) - -#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8) - -#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10) - -#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12) -#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12) - -#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14) -#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14) - -#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16) -#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16) - -#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18) -#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18) - -#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20) -#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20) - -#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22) -#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22) - -#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24) -#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24) - -#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26) -#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26) - -#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28) -#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28) - -#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30) -#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h deleted file mode 100644 index 46bcfb63b8de..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h +++ /dev/null @@ -1,69 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank P register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00) -#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04) -#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08) -#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c) -#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10) - -#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0) -#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0) - -#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2) -#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2) - -#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4) -#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4) - -#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6) -#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6) - -#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8) -#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8) - -#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10) -#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10) - -#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12) -#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12) - -#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14) -#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14) - -#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16) -#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16) - -#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18) -#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18) - -#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20) -#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20) - -#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22) -#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22) - -#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24) -#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24) - -#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26) -#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26) - -#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28) -#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h deleted file mode 100644 index 1712223487b0..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank Q register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00) -#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04) -#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08) -#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c) -#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10) - -#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0) -#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0) - -#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2) -#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2) - -#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4) - -#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6) - -#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8) - -#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10) - -#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12) - -#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14) -#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14) - -#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16) -#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16) - diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 686a4f270b12..2c0353a80906 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -50,7 +50,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 79412f735a8d..bc1c470b7de6 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -30,26 +30,18 @@ #include #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK -#include - void s3c_pm_debug_smdkled(u32 set, u32 clear) { unsigned long flags; - u32 reg; + int i; local_irq_save(flags); - reg = __raw_readl(S3C64XX_GPNCON); - reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | - S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)); - reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | - S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15); - __raw_writel(reg, S3C64XX_GPNCON); - - reg = __raw_readl(S3C64XX_GPNDAT); - reg &= ~(clear << 12); - reg |= set << 12; - __raw_writel(reg, S3C64XX_GPNDAT); - + for (i = 0; i < 4; i++) { + if (clear & (1 << i)) + gpio_set_value(S3C64XX_GPN(12 + i), 0); + if (set & (1 << i)) + gpio_set_value(S3C64XX_GPN(12 + i), 1); + } local_irq_restore(flags); } #endif @@ -187,6 +179,18 @@ static int s3c64xx_pm_init(void) pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); + gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); + gpio_request(S3C64XX_GPN(14), "DEBUG_LED2"); + gpio_request(S3C64XX_GPN(15), "DEBUG_LED3"); + gpio_direction_output(S3C64XX_GPN(12), 0); + gpio_direction_output(S3C64XX_GPN(13), 0); + gpio_direction_output(S3C64XX_GPN(14), 0); + gpio_direction_output(S3C64XX_GPN(15), 0); +#endif + return 0; } diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c index 406192a43c6e..241af94a9e70 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c0.c +++ b/arch/arm/mach-s3c64xx/setup-i2c0.c @@ -18,14 +18,11 @@ struct platform_device; /* don't need the contents */ -#include #include #include void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0); - s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0); - s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c index 1ee62c97cd7f..3d13a961986d 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c1.c +++ b/arch/arm/mach-s3c64xx/setup-i2c1.c @@ -18,14 +18,11 @@ struct platform_device; /* don't need the contents */ -#include #include #include void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1); - s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1); - s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2, + S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index afe5a762f46e..1f87732b2320 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -20,7 +20,6 @@ #define S3C64XX_VA_GPIO (0x0) #include -#include #define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT)) @@ -68,6 +67,13 @@ ENTRY(s3c_cpu_resume) ldr r2, =LL_UART /* for debug */ #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + +#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) +#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) + +#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + /* Initialise the GPIO state if we are debugging via the SMDK LEDs, * as the uboot version supplied resets these to inputs during the * resume checks. -- cgit v1.2.3 From 5a9f68fd2608384e09e18767ebc253d7aee86b34 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 6 Apr 2011 17:24:31 +0000 Subject: DA8xx: kill duplicate #define DA8XX_GPIO_BASE DA8XX_GPIO_BASE is #define'd in both and devices-da8xx.c; moreover, it's not even used in the latter file... Signed-off-by: Sergei Shtylyov --- arch/arm/mach-davinci/devices-da8xx.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 58a02dc7b15a..feffafa121e4 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -36,7 +36,6 @@ #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 #define DA8XX_EMAC_MDIO_BASE 0x01e24000 -#define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_I2C1_BASE 0x01e28000 #define DA8XX_SPI0_BASE 0x01c41000 #define DA830_SPI1_BASE 0x01e12000 -- cgit v1.2.3 From e0c199d0989e2f9fa2683e817624779f55abfa7f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 6 Apr 2011 17:26:06 +0000 Subject: DA8xx: kill duplicate #define DA8XX_PLL1_BASE Commit 044ca01521d077a35b46a445b02b93f413109a4b (davinci: da850/omap-l138: add support for SoC suspend) introduced DA8XX_PLL1_BASE despite PLL1 exists only on DA850/OMAP-L138 and da850.c even already #define'd DA850_PLL1_BASE. Kill the duplicate macro, renaming an existing reference to it... Signed-off-by: Sergei Shtylyov --- arch/arm/mach-davinci/da850.c | 2 +- arch/arm/mach-davinci/include/mach/da8xx.h | 1 - 2 files changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b95b9196deed..133aac405853 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1055,7 +1055,7 @@ int da850_register_pm(struct platform_device *pdev) if (!pdata->cpupll_reg_base) return -ENOMEM; - pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K); + pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K); if (!pdata->ddrpll_reg_base) { ret = -ENOMEM; goto no_ddrpll_mem; diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index e4fc1af8500e..2897014a7e58 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -65,7 +65,6 @@ extern unsigned int da850_max_speed; #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 #define DA8XX_LCD_CNTRL_BASE 0x01e13000 -#define DA8XX_PLL1_BASE 0x01e1a000 #define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 -- cgit v1.2.3 From 8ac764e3479f6057c1cc85bd960dd2aa0fb82fea Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 6 Apr 2011 17:29:24 +0000 Subject: DA8xx: move base address #define's to their proper place Move DA8XX_MMCSD0_BASE, DA8XX_LCD_CNTRL_BASE, and DA8XX_DDR2_CTL_BASE from to devices-da8xx.c as the latter file is the only place where these macros are used. While at it, restore sorting the base address macros by address value in devices-da8xx.c... Signed-off-by: Sergei Shtylyov --- arch/arm/mach-davinci/devices-da8xx.c | 15 +++++++++------ arch/arm/mach-davinci/include/mach/da8xx.h | 3 --- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index feffafa121e4..4e66881c7aee 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,22 +24,25 @@ #include "clock.h" #define DA8XX_TPCC_BASE 0x01c00000 -#define DA850_MMCSD1_BASE 0x01e1b000 -#define DA850_TPCC1_BASE 0x01e30000 #define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC1_BASE 0x01c08400 -#define DA850_TPTC2_BASE 0x01e38000 #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 -#define DA8XX_RTC_BASE 0x01C23000 +#define DA8XX_RTC_BASE 0x01c23000 +#define DA8XX_MMCSD0_BASE 0x01c40000 +#define DA8XX_SPI0_BASE 0x01c41000 +#define DA830_SPI1_BASE 0x01e12000 +#define DA8XX_LCD_CNTRL_BASE 0x01e13000 +#define DA850_MMCSD1_BASE 0x01e1b000 #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 #define DA8XX_EMAC_MDIO_BASE 0x01e24000 #define DA8XX_I2C1_BASE 0x01e28000 -#define DA8XX_SPI0_BASE 0x01c41000 -#define DA830_SPI1_BASE 0x01e12000 +#define DA850_TPCC1_BASE 0x01e30000 +#define DA850_TPTC2_BASE 0x01e38000 #define DA850_SPI1_BASE 0x01f0e000 +#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 2897014a7e58..ad64da713fc8 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -64,12 +64,9 @@ extern unsigned int da850_max_speed; #define DA8XX_TIMER64P1_BASE 0x01c21000 #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 -#define DA8XX_LCD_CNTRL_BASE 0x01e13000 -#define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 -#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 void __init da830_init(void); -- cgit v1.2.3 From f2a97a9dbd86eb1ef956bdf20e05c507b32beb96 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Thu, 5 May 2011 12:44:41 +0200 Subject: btrfs: remove all unused functions Remove static and global declarations and/or definitions. Reduces size of btrfs.ko by ~3.4kB. text data bss dec hex filename 402081 7464 200 409745 64091 btrfs.ko.base 398620 7144 200 405964 631cc btrfs.ko.remove-all Signed-off-by: David Sterba --- fs/btrfs/ctree.h | 78 --------------- fs/btrfs/delayed-ref.c | 38 -------- fs/btrfs/delayed-ref.h | 1 - fs/btrfs/disk-io.c | 27 ------ fs/btrfs/disk-io.h | 7 -- fs/btrfs/extent_io.c | 227 -------------------------------------------- fs/btrfs/extent_io.h | 21 ---- fs/btrfs/free-space-cache.c | 15 --- fs/btrfs/free-space-cache.h | 1 - fs/btrfs/inode.c | 52 ---------- fs/btrfs/locking.c | 25 ----- fs/btrfs/locking.h | 2 - fs/btrfs/ref-cache.c | 164 -------------------------------- fs/btrfs/ref-cache.h | 24 ----- fs/btrfs/relocation.c | 2 +- fs/btrfs/root-tree.c | 47 --------- fs/btrfs/sysfs.c | 65 ------------- fs/btrfs/volumes.c | 19 ---- fs/btrfs/volumes.h | 3 - 19 files changed, 1 insertion(+), 817 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index b66216e636c2..e37d441617d2 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1440,26 +1440,12 @@ static inline u64 btrfs_stripe_offset_nr(struct extent_buffer *eb, return btrfs_stripe_offset(eb, btrfs_stripe_nr(c, nr)); } -static inline void btrfs_set_stripe_offset_nr(struct extent_buffer *eb, - struct btrfs_chunk *c, int nr, - u64 val) -{ - btrfs_set_stripe_offset(eb, btrfs_stripe_nr(c, nr), val); -} - static inline u64 btrfs_stripe_devid_nr(struct extent_buffer *eb, struct btrfs_chunk *c, int nr) { return btrfs_stripe_devid(eb, btrfs_stripe_nr(c, nr)); } -static inline void btrfs_set_stripe_devid_nr(struct extent_buffer *eb, - struct btrfs_chunk *c, int nr, - u64 val) -{ - btrfs_set_stripe_devid(eb, btrfs_stripe_nr(c, nr), val); -} - /* struct btrfs_block_group_item */ BTRFS_SETGET_STACK_FUNCS(block_group_used, struct btrfs_block_group_item, used, 64); @@ -1517,14 +1503,6 @@ btrfs_inode_ctime(struct btrfs_inode_item *inode_item) return (struct btrfs_timespec *)ptr; } -static inline struct btrfs_timespec * -btrfs_inode_otime(struct btrfs_inode_item *inode_item) -{ - unsigned long ptr = (unsigned long)inode_item; - ptr += offsetof(struct btrfs_inode_item, otime); - return (struct btrfs_timespec *)ptr; -} - BTRFS_SETGET_FUNCS(timespec_sec, struct btrfs_timespec, sec, 64); BTRFS_SETGET_FUNCS(timespec_nsec, struct btrfs_timespec, nsec, 32); @@ -1875,33 +1853,6 @@ static inline u8 *btrfs_header_chunk_tree_uuid(struct extent_buffer *eb) return (u8 *)ptr; } -static inline u8 *btrfs_super_fsid(struct extent_buffer *eb) -{ - unsigned long ptr = offsetof(struct btrfs_super_block, fsid); - return (u8 *)ptr; -} - -static inline u8 *btrfs_header_csum(struct extent_buffer *eb) -{ - unsigned long ptr = offsetof(struct btrfs_header, csum); - return (u8 *)ptr; -} - -static inline struct btrfs_node *btrfs_buffer_node(struct extent_buffer *eb) -{ - return NULL; -} - -static inline struct btrfs_leaf *btrfs_buffer_leaf(struct extent_buffer *eb) -{ - return NULL; -} - -static inline struct btrfs_header *btrfs_buffer_header(struct extent_buffer *eb) -{ - return NULL; -} - static inline int btrfs_is_leaf(struct extent_buffer *eb) { return btrfs_header_level(eb) == 0; @@ -2055,22 +2006,6 @@ static inline struct btrfs_root *btrfs_sb(struct super_block *sb) return sb->s_fs_info; } -static inline int btrfs_set_root_name(struct btrfs_root *root, - const char *name, int len) -{ - /* if we already have a name just free it */ - kfree(root->name); - - root->name = kmalloc(len+1, GFP_KERNEL); - if (!root->name) - return -ENOMEM; - - memcpy(root->name, name, len); - root->name[len] = '\0'; - - return 0; -} - static inline u32 btrfs_level_size(struct btrfs_root *root, int level) { if (level == 0) @@ -2304,11 +2239,6 @@ static inline int btrfs_del_item(struct btrfs_trans_handle *trans, int btrfs_insert_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_key *key, void *data, u32 data_size); -int btrfs_insert_some_items(struct btrfs_trans_handle *trans, - struct btrfs_root *root, - struct btrfs_path *path, - struct btrfs_key *cpu_key, u32 *data_size, - int nr); int btrfs_insert_empty_items(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_path *path, @@ -2354,8 +2284,6 @@ int btrfs_update_root(struct btrfs_trans_handle *trans, struct btrfs_root *item); int btrfs_find_last_root(struct btrfs_root *root, u64 objectid, struct btrfs_root_item *item, struct btrfs_key *key); -int btrfs_search_root(struct btrfs_root *root, u64 search_start, - u64 *found_objectid); int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid); int btrfs_find_orphan_roots(struct btrfs_root *tree_root); int btrfs_set_root_node(struct btrfs_root_item *item, @@ -2494,8 +2422,6 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, u32 min_type); int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput); -int btrfs_start_one_delalloc_inode(struct btrfs_root *root, int delay_iput, - int sync); int btrfs_set_extent_delalloc(struct inode *inode, u64 start, u64 end, struct extent_state **cached_state); int btrfs_writepages(struct address_space *mapping, @@ -2579,10 +2505,6 @@ int btrfs_defrag_leaves(struct btrfs_trans_handle *trans, /* sysfs.c */ int btrfs_init_sysfs(void); void btrfs_exit_sysfs(void); -int btrfs_sysfs_add_super(struct btrfs_fs_info *fs); -int btrfs_sysfs_add_root(struct btrfs_root *root); -void btrfs_sysfs_del_root(struct btrfs_root *root); -void btrfs_sysfs_del_super(struct btrfs_fs_info *root); /* xattr.c */ ssize_t btrfs_listxattr(struct dentry *dentry, char *buffer, size_t size); diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c index bce28f653899..cb9b9a431fc9 100644 --- a/fs/btrfs/delayed-ref.c +++ b/fs/btrfs/delayed-ref.c @@ -280,44 +280,6 @@ again: return 1; } -/* - * This checks to see if there are any delayed refs in the - * btree for a given bytenr. It returns one if it finds any - * and zero otherwise. - * - * If it only finds a head node, it returns 0. - * - * The idea is to use this when deciding if you can safely delete an - * extent from the extent allocation tree. There may be a pending - * ref in the rbtree that adds or removes references, so as long as this - * returns one you need to leave the BTRFS_EXTENT_ITEM in the extent - * allocation tree. - */ -int btrfs_delayed_ref_pending(struct btrfs_trans_handle *trans, u64 bytenr) -{ - struct btrfs_delayed_ref_node *ref; - struct btrfs_delayed_ref_root *delayed_refs; - struct rb_node *prev_node; - int ret = 0; - - delayed_refs = &trans->transaction->delayed_refs; - spin_lock(&delayed_refs->lock); - - ref = find_ref_head(&delayed_refs->root, bytenr, NULL); - if (ref) { - prev_node = rb_prev(&ref->rb_node); - if (!prev_node) - goto out; - ref = rb_entry(prev_node, struct btrfs_delayed_ref_node, - rb_node); - if (ref->bytenr == bytenr) - ret = 1; - } -out: - spin_unlock(&delayed_refs->lock); - return ret; -} - /* * helper function to update an extent delayed ref in the * rbtree. existing and update must both have the same diff --git a/fs/btrfs/delayed-ref.h b/fs/btrfs/delayed-ref.h index 946ed71ab84f..e287e3b0eab0 100644 --- a/fs/btrfs/delayed-ref.h +++ b/fs/btrfs/delayed-ref.h @@ -166,7 +166,6 @@ int btrfs_add_delayed_extent_op(struct btrfs_trans_handle *trans, struct btrfs_delayed_ref_head * btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr); -int btrfs_delayed_ref_pending(struct btrfs_trans_handle *trans, u64 bytenr); int btrfs_delayed_ref_lock(struct btrfs_trans_handle *trans, struct btrfs_delayed_ref_head *head); int btrfs_find_ref_cluster(struct btrfs_trans_handle *trans, diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 4084959b36fd..fa287c551ffc 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -650,12 +650,6 @@ unsigned long btrfs_async_submit_limit(struct btrfs_fs_info *info) return 256 * limit; } -int btrfs_congested_async(struct btrfs_fs_info *info, int iodone) -{ - return atomic_read(&info->nr_async_bios) > - btrfs_async_submit_limit(info); -} - static void run_one_async_start(struct btrfs_work *work) { struct async_submit_bio *async; @@ -1283,21 +1277,6 @@ out: return root; } -struct btrfs_root *btrfs_lookup_fs_root(struct btrfs_fs_info *fs_info, - u64 root_objectid) -{ - struct btrfs_root *root; - - if (root_objectid == BTRFS_ROOT_TREE_OBJECTID) - return fs_info->tree_root; - if (root_objectid == BTRFS_EXTENT_TREE_OBJECTID) - return fs_info->extent_root; - - root = radix_tree_lookup(&fs_info->fs_roots_radix, - (unsigned long)root_objectid); - return root; -} - struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, struct btrfs_key *location) { @@ -1369,11 +1348,6 @@ fail: return ERR_PTR(ret); } -struct btrfs_root *btrfs_read_fs_root(struct btrfs_fs_info *fs_info, - struct btrfs_key *location, - const char *name, int namelen) -{ - return btrfs_read_fs_root_no_name(fs_info, location); #if 0 struct btrfs_root *root; int ret; @@ -1402,7 +1376,6 @@ struct btrfs_root *btrfs_read_fs_root(struct btrfs_fs_info *fs_info, root->in_sysfs = 1; return root; #endif -} static int btrfs_congested_fn(void *congested_data, int bdi_bits) { diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h index 758f3ca614ee..2d75f9e896f6 100644 --- a/fs/btrfs/disk-io.h +++ b/fs/btrfs/disk-io.h @@ -55,11 +55,6 @@ int btrfs_commit_super(struct btrfs_root *root); int btrfs_error_commit_super(struct btrfs_root *root); struct extent_buffer *btrfs_find_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize); -struct btrfs_root *btrfs_lookup_fs_root(struct btrfs_fs_info *fs_info, - u64 root_objectid); -struct btrfs_root *btrfs_read_fs_root(struct btrfs_fs_info *fs_info, - struct btrfs_key *location, - const char *name, int namelen); struct btrfs_root *btrfs_read_fs_root_no_radix(struct btrfs_root *tree_root, struct btrfs_key *location); struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, @@ -80,8 +75,6 @@ int btrfs_wq_submit_bio(struct btrfs_fs_info *fs_info, struct inode *inode, unsigned long bio_flags, u64 bio_offset, extent_submit_bio_hook_t *submit_bio_start, extent_submit_bio_hook_t *submit_bio_done); - -int btrfs_congested_async(struct btrfs_fs_info *info, int iodone); unsigned long btrfs_async_submit_limit(struct btrfs_fs_info *info); int btrfs_write_tree_block(struct extent_buffer *buf); int btrfs_wait_tree_block_writeback(struct extent_buffer *buf); diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 9369289ce771..91208296ff2b 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -941,13 +941,6 @@ int set_extent_new(struct extent_io_tree *tree, u64 start, u64 end, NULL, mask); } -static int clear_extent_new(struct extent_io_tree *tree, u64 start, u64 end, - gfp_t mask) -{ - return clear_extent_bit(tree, start, end, EXTENT_NEW, 0, 0, - NULL, mask); -} - int set_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end, struct extent_state **cached_state, gfp_t mask) { @@ -963,11 +956,6 @@ static int clear_extent_uptodate(struct extent_io_tree *tree, u64 start, cached_state, mask); } -int wait_on_extent_writeback(struct extent_io_tree *tree, u64 start, u64 end) -{ - return wait_extent_bit(tree, start, end, EXTENT_WRITEBACK); -} - /* * either insert or lock state struct between start and end use mask to tell * us if waiting is desired. @@ -1027,25 +1015,6 @@ int unlock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask) mask); } -/* - * helper function to set pages and extents in the tree dirty - */ -int set_range_dirty(struct extent_io_tree *tree, u64 start, u64 end) -{ - unsigned long index = start >> PAGE_CACHE_SHIFT; - unsigned long end_index = end >> PAGE_CACHE_SHIFT; - struct page *page; - - while (index <= end_index) { - page = find_get_page(tree->mapping, index); - BUG_ON(!page); - __set_page_dirty_nobuffers(page); - page_cache_release(page); - index++; - } - return 0; -} - /* * helper function to set both pages and extents in the tree writeback */ @@ -1819,46 +1788,6 @@ static void end_bio_extent_readpage(struct bio *bio, int err) bio_put(bio); } -/* - * IO done from prepare_write is pretty simple, we just unlock - * the structs in the extent tree when done, and set the uptodate bits - * as appropriate. - */ -static void end_bio_extent_preparewrite(struct bio *bio, int err) -{ - const int uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); - struct bio_vec *bvec = bio->bi_io_vec + bio->bi_vcnt - 1; - struct extent_io_tree *tree; - u64 start; - u64 end; - - do { - struct page *page = bvec->bv_page; - struct extent_state *cached = NULL; - tree = &BTRFS_I(page->mapping->host)->io_tree; - - start = ((u64)page->index << PAGE_CACHE_SHIFT) + - bvec->bv_offset; - end = start + bvec->bv_len - 1; - - if (--bvec >= bio->bi_io_vec) - prefetchw(&bvec->bv_page->flags); - - if (uptodate) { - set_extent_uptodate(tree, start, end, &cached, - GFP_ATOMIC); - } else { - ClearPageUptodate(page); - SetPageError(page); - } - - unlock_extent_cached(tree, start, end, &cached, GFP_ATOMIC); - - } while (bvec >= bio->bi_io_vec); - - bio_put(bio); -} - struct bio * btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs, gfp_t gfp_flags) @@ -2719,128 +2648,6 @@ int extent_invalidatepage(struct extent_io_tree *tree, return 0; } -/* - * simple commit_write call, set_range_dirty is used to mark both - * the pages and the extent records as dirty - */ -int extent_commit_write(struct extent_io_tree *tree, - struct inode *inode, struct page *page, - unsigned from, unsigned to) -{ - loff_t pos = ((loff_t)page->index << PAGE_CACHE_SHIFT) + to; - - set_page_extent_mapped(page); - set_page_dirty(page); - - if (pos > inode->i_size) { - i_size_write(inode, pos); - mark_inode_dirty(inode); - } - return 0; -} - -int extent_prepare_write(struct extent_io_tree *tree, - struct inode *inode, struct page *page, - unsigned from, unsigned to, get_extent_t *get_extent) -{ - u64 page_start = (u64)page->index << PAGE_CACHE_SHIFT; - u64 page_end = page_start + PAGE_CACHE_SIZE - 1; - u64 block_start; - u64 orig_block_start; - u64 block_end; - u64 cur_end; - struct extent_map *em; - unsigned blocksize = 1 << inode->i_blkbits; - size_t pg_offset = 0; - size_t block_off_start; - size_t block_off_end; - int err = 0; - int iocount = 0; - int ret = 0; - int isnew; - - set_page_extent_mapped(page); - - block_start = (page_start + from) & ~((u64)blocksize - 1); - block_end = (page_start + to - 1) | (blocksize - 1); - orig_block_start = block_start; - - lock_extent(tree, page_start, page_end, GFP_NOFS); - while (block_start <= block_end) { - em = get_extent(inode, page, pg_offset, block_start, - block_end - block_start + 1, 1); - if (IS_ERR_OR_NULL(em)) - goto err; - - cur_end = min(block_end, extent_map_end(em) - 1); - block_off_start = block_start & (PAGE_CACHE_SIZE - 1); - block_off_end = block_off_start + blocksize; - isnew = clear_extent_new(tree, block_start, cur_end, GFP_NOFS); - - if (!PageUptodate(page) && isnew && - (block_off_end > to || block_off_start < from)) { - void *kaddr; - - kaddr = kmap_atomic(page, KM_USER0); - if (block_off_end > to) - memset(kaddr + to, 0, block_off_end - to); - if (block_off_start < from) - memset(kaddr + block_off_start, 0, - from - block_off_start); - flush_dcache_page(page); - kunmap_atomic(kaddr, KM_USER0); - } - if ((em->block_start != EXTENT_MAP_HOLE && - em->block_start != EXTENT_MAP_INLINE) && - !isnew && !PageUptodate(page) && - (block_off_end > to || block_off_start < from) && - !test_range_bit(tree, block_start, cur_end, - EXTENT_UPTODATE, 1, NULL)) { - u64 sector; - u64 extent_offset = block_start - em->start; - size_t iosize; - sector = (em->block_start + extent_offset) >> 9; - iosize = (cur_end - block_start + blocksize) & - ~((u64)blocksize - 1); - /* - * we've already got the extent locked, but we - * need to split the state such that our end_bio - * handler can clear the lock. - */ - set_extent_bit(tree, block_start, - block_start + iosize - 1, - EXTENT_LOCKED, 0, NULL, NULL, GFP_NOFS); - ret = submit_extent_page(READ, tree, page, - sector, iosize, pg_offset, em->bdev, - NULL, 1, - end_bio_extent_preparewrite, 0, - 0, 0); - if (ret && !err) - err = ret; - iocount++; - block_start = block_start + iosize; - } else { - struct extent_state *cached = NULL; - - set_extent_uptodate(tree, block_start, cur_end, &cached, - GFP_NOFS); - unlock_extent_cached(tree, block_start, cur_end, - &cached, GFP_NOFS); - block_start = cur_end + 1; - } - pg_offset = block_start & (PAGE_CACHE_SIZE - 1); - free_extent_map(em); - } - if (iocount) { - wait_extent_bit(tree, orig_block_start, - block_end, EXTENT_LOCKED); - } - check_page_uptodate(tree, page); -err: - /* FIXME, zero out newly allocated blocks on error */ - return err; -} - /* * a helper for releasepage, this tests for areas of the page that * are locked or under IO and drops the related state bits if it is safe @@ -2927,33 +2734,6 @@ int try_release_extent_mapping(struct extent_map_tree *map, return try_release_extent_state(map, tree, page, mask); } -sector_t extent_bmap(struct address_space *mapping, sector_t iblock, - get_extent_t *get_extent) -{ - struct inode *inode = mapping->host; - struct extent_state *cached_state = NULL; - u64 start = iblock << inode->i_blkbits; - sector_t sector = 0; - size_t blksize = (1 << inode->i_blkbits); - struct extent_map *em; - - lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + blksize - 1, - 0, &cached_state, GFP_NOFS); - em = get_extent(inode, NULL, 0, start, blksize, 0); - unlock_extent_cached(&BTRFS_I(inode)->io_tree, start, - start + blksize - 1, &cached_state, GFP_NOFS); - if (IS_ERR_OR_NULL(em)) - return 0; - - if (em->block_start > EXTENT_MAP_LAST_BYTE) - goto out; - - sector = (em->block_start + start - em->start) >> inode->i_blkbits; -out: - free_extent_map(em); - return sector; -} - /* * helper function for fiemap, which doesn't want to see any holes. * This maps until we find something past 'last' @@ -3437,13 +3217,6 @@ int clear_extent_buffer_dirty(struct extent_io_tree *tree, return 0; } -int wait_on_extent_buffer_writeback(struct extent_io_tree *tree, - struct extent_buffer *eb) -{ - return wait_on_extent_writeback(tree, eb->start, - eb->start + eb->len - 1); -} - int set_extent_buffer_dirty(struct extent_io_tree *tree, struct extent_buffer *eb) { diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index d1c5a57c9984..4e8445a4757c 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -153,15 +153,6 @@ static inline int extent_compress_type(unsigned long bio_flags) struct extent_map_tree; -static inline struct extent_state *extent_state_next(struct extent_state *state) -{ - struct rb_node *node; - node = rb_next(&state->rb_node); - if (!node) - return NULL; - return rb_entry(node, struct extent_state, rb_node); -} - typedef struct extent_map *(get_extent_t)(struct inode *inode, struct page *page, size_t pg_offset, @@ -237,17 +228,8 @@ int extent_readpages(struct extent_io_tree *tree, struct address_space *mapping, struct list_head *pages, unsigned nr_pages, get_extent_t get_extent); -int extent_prepare_write(struct extent_io_tree *tree, - struct inode *inode, struct page *page, - unsigned from, unsigned to, get_extent_t *get_extent); -int extent_commit_write(struct extent_io_tree *tree, - struct inode *inode, struct page *page, - unsigned from, unsigned to); -sector_t extent_bmap(struct address_space *mapping, sector_t iblock, - get_extent_t *get_extent); int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, __u64 start, __u64 len, get_extent_t *get_extent); -int set_range_dirty(struct extent_io_tree *tree, u64 start, u64 end); int set_state_private(struct extent_io_tree *tree, u64 start, u64 private); int get_state_private(struct extent_io_tree *tree, u64 start, u64 *private); void set_page_extent_mapped(struct page *page); @@ -284,9 +266,6 @@ void memmove_extent_buffer(struct extent_buffer *dst, unsigned long dst_offset, unsigned long src_offset, unsigned long len); void memset_extent_buffer(struct extent_buffer *eb, char c, unsigned long start, unsigned long len); -int wait_on_extent_buffer_writeback(struct extent_io_tree *tree, - struct extent_buffer *eb); -int wait_on_extent_writeback(struct extent_io_tree *tree, u64 start, u64 end); int wait_extent_bit(struct extent_io_tree *tree, u64 start, u64 end, int bits); int clear_extent_buffer_dirty(struct extent_io_tree *tree, struct extent_buffer *eb); diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 48fafcb85b0e..0290b0c7b003 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -1685,21 +1685,6 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group, "\n", count); } -u64 btrfs_block_group_free_space(struct btrfs_block_group_cache *block_group) -{ - struct btrfs_free_space *info; - struct rb_node *n; - u64 ret = 0; - - for (n = rb_first(&block_group->free_space_offset); n; - n = rb_next(n)) { - info = rb_entry(n, struct btrfs_free_space, offset_index); - ret += info->bytes; - } - - return ret; -} - /* * for a given cluster, put all of its extents back into the free * space cache. If the block group passed doesn't match the block group diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h index 65c3b935289f..12b2b5165f8a 100644 --- a/fs/btrfs/free-space-cache.h +++ b/fs/btrfs/free-space-cache.h @@ -55,7 +55,6 @@ u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group, u64 offset, u64 bytes, u64 empty_size); void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group, u64 bytes); -u64 btrfs_block_group_free_space(struct btrfs_block_group_cache *block_group); int btrfs_find_space_cluster(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_block_group_cache *block_group, diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 2840989737b7..57122a5e8473 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7185,58 +7185,6 @@ int btrfs_start_delalloc_inodes(struct btrfs_root *root, int delay_iput) return 0; } -int btrfs_start_one_delalloc_inode(struct btrfs_root *root, int delay_iput, - int sync) -{ - struct btrfs_inode *binode; - struct inode *inode = NULL; - - spin_lock(&root->fs_info->delalloc_lock); - while (!list_empty(&root->fs_info->delalloc_inodes)) { - binode = list_entry(root->fs_info->delalloc_inodes.next, - struct btrfs_inode, delalloc_inodes); - inode = igrab(&binode->vfs_inode); - if (inode) { - list_move_tail(&binode->delalloc_inodes, - &root->fs_info->delalloc_inodes); - break; - } - - list_del_init(&binode->delalloc_inodes); - cond_resched_lock(&root->fs_info->delalloc_lock); - } - spin_unlock(&root->fs_info->delalloc_lock); - - if (inode) { - if (sync) { - filemap_write_and_wait(inode->i_mapping); - /* - * We have to do this because compression doesn't - * actually set PG_writeback until it submits the pages - * for IO, which happens in an async thread, so we could - * race and not actually wait for any writeback pages - * because they've not been submitted yet. Technically - * this could still be the case for the ordered stuff - * since the async thread may not have started to do its - * work yet. If this becomes the case then we need to - * figure out a way to make sure that in writepage we - * wait for any async pages to be submitted before - * returning so that fdatawait does what its supposed to - * do. - */ - btrfs_wait_ordered_range(inode, 0, (u64)-1); - } else { - filemap_flush(inode->i_mapping); - } - if (delay_iput) - btrfs_add_delayed_iput(inode); - else - iput(inode); - return 1; - } - return 0; -} - static int btrfs_symlink(struct inode *dir, struct dentry *dentry, const char *symname) { diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c index 6151f2ea38bb..66fa43dc3f0f 100644 --- a/fs/btrfs/locking.c +++ b/fs/btrfs/locking.c @@ -185,31 +185,6 @@ sleep: return 0; } -/* - * Very quick trylock, this does not spin or schedule. It returns - * 1 with the spinlock held if it was able to take the lock, or it - * returns zero if it was unable to take the lock. - * - * After this call, scheduling is not safe without first calling - * btrfs_set_lock_blocking() - */ -int btrfs_try_tree_lock(struct extent_buffer *eb) -{ - if (spin_trylock(&eb->lock)) { - if (test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags)) { - /* - * we've got the spinlock, but the real owner is - * blocking. Drop the spinlock and return failure - */ - spin_unlock(&eb->lock); - return 0; - } - return 1; - } - /* someone else has the spinlock giveup */ - return 0; -} - int btrfs_tree_unlock(struct extent_buffer *eb) { /* diff --git a/fs/btrfs/locking.h b/fs/btrfs/locking.h index 6c4ce457168c..5c33a560a2f1 100644 --- a/fs/btrfs/locking.h +++ b/fs/btrfs/locking.h @@ -21,8 +21,6 @@ int btrfs_tree_lock(struct extent_buffer *eb); int btrfs_tree_unlock(struct extent_buffer *eb); - -int btrfs_try_tree_lock(struct extent_buffer *eb); int btrfs_try_spin_lock(struct extent_buffer *eb); void btrfs_set_lock_blocking(struct extent_buffer *eb); diff --git a/fs/btrfs/ref-cache.c b/fs/btrfs/ref-cache.c index a97314cf6bd6..82d569cb6267 100644 --- a/fs/btrfs/ref-cache.c +++ b/fs/btrfs/ref-cache.c @@ -23,56 +23,6 @@ #include "ref-cache.h" #include "transaction.h" -/* - * leaf refs are used to cache the information about which extents - * a given leaf has references on. This allows us to process that leaf - * in btrfs_drop_snapshot without needing to read it back from disk. - */ - -/* - * kmalloc a leaf reference struct and update the counters for the - * total ref cache size - */ -struct btrfs_leaf_ref *btrfs_alloc_leaf_ref(struct btrfs_root *root, - int nr_extents) -{ - struct btrfs_leaf_ref *ref; - size_t size = btrfs_leaf_ref_size(nr_extents); - - ref = kmalloc(size, GFP_NOFS); - if (ref) { - spin_lock(&root->fs_info->ref_cache_lock); - root->fs_info->total_ref_cache_size += size; - spin_unlock(&root->fs_info->ref_cache_lock); - - memset(ref, 0, sizeof(*ref)); - atomic_set(&ref->usage, 1); - INIT_LIST_HEAD(&ref->list); - } - return ref; -} - -/* - * free a leaf reference struct and update the counters for the - * total ref cache size - */ -void btrfs_free_leaf_ref(struct btrfs_root *root, struct btrfs_leaf_ref *ref) -{ - if (!ref) - return; - WARN_ON(atomic_read(&ref->usage) == 0); - if (atomic_dec_and_test(&ref->usage)) { - size_t size = btrfs_leaf_ref_size(ref->nritems); - - BUG_ON(ref->in_tree); - kfree(ref); - - spin_lock(&root->fs_info->ref_cache_lock); - root->fs_info->total_ref_cache_size -= size; - spin_unlock(&root->fs_info->ref_cache_lock); - } -} - static struct rb_node *tree_insert(struct rb_root *root, u64 bytenr, struct rb_node *node) { @@ -116,117 +66,3 @@ static struct rb_node *tree_search(struct rb_root *root, u64 bytenr) } return NULL; } - -int btrfs_remove_leaf_refs(struct btrfs_root *root, u64 max_root_gen, - int shared) -{ - struct btrfs_leaf_ref *ref = NULL; - struct btrfs_leaf_ref_tree *tree = root->ref_tree; - - if (shared) - tree = &root->fs_info->shared_ref_tree; - if (!tree) - return 0; - - spin_lock(&tree->lock); - while (!list_empty(&tree->list)) { - ref = list_entry(tree->list.next, struct btrfs_leaf_ref, list); - BUG_ON(ref->tree != tree); - if (ref->root_gen > max_root_gen) - break; - if (!xchg(&ref->in_tree, 0)) { - cond_resched_lock(&tree->lock); - continue; - } - - rb_erase(&ref->rb_node, &tree->root); - list_del_init(&ref->list); - - spin_unlock(&tree->lock); - btrfs_free_leaf_ref(root, ref); - cond_resched(); - spin_lock(&tree->lock); - } - spin_unlock(&tree->lock); - return 0; -} - -/* - * find the leaf ref for a given extent. This returns the ref struct with - * a usage reference incremented - */ -struct btrfs_leaf_ref *btrfs_lookup_leaf_ref(struct btrfs_root *root, - u64 bytenr) -{ - struct rb_node *rb; - struct btrfs_leaf_ref *ref = NULL; - struct btrfs_leaf_ref_tree *tree = root->ref_tree; -again: - if (tree) { - spin_lock(&tree->lock); - rb = tree_search(&tree->root, bytenr); - if (rb) - ref = rb_entry(rb, struct btrfs_leaf_ref, rb_node); - if (ref) - atomic_inc(&ref->usage); - spin_unlock(&tree->lock); - if (ref) - return ref; - } - if (tree != &root->fs_info->shared_ref_tree) { - tree = &root->fs_info->shared_ref_tree; - goto again; - } - return NULL; -} - -/* - * add a fully filled in leaf ref struct - * remove all the refs older than a given root generation - */ -int btrfs_add_leaf_ref(struct btrfs_root *root, struct btrfs_leaf_ref *ref, - int shared) -{ - int ret = 0; - struct rb_node *rb; - struct btrfs_leaf_ref_tree *tree = root->ref_tree; - - if (shared) - tree = &root->fs_info->shared_ref_tree; - - spin_lock(&tree->lock); - rb = tree_insert(&tree->root, ref->bytenr, &ref->rb_node); - if (rb) { - ret = -EEXIST; - } else { - atomic_inc(&ref->usage); - ref->tree = tree; - ref->in_tree = 1; - list_add_tail(&ref->list, &tree->list); - } - spin_unlock(&tree->lock); - return ret; -} - -/* - * remove a single leaf ref from the tree. This drops the ref held by the tree - * only - */ -int btrfs_remove_leaf_ref(struct btrfs_root *root, struct btrfs_leaf_ref *ref) -{ - struct btrfs_leaf_ref_tree *tree; - - if (!xchg(&ref->in_tree, 0)) - return 0; - - tree = ref->tree; - spin_lock(&tree->lock); - - rb_erase(&ref->rb_node, &tree->root); - list_del_init(&ref->list); - - spin_unlock(&tree->lock); - - btrfs_free_leaf_ref(root, ref); - return 0; -} diff --git a/fs/btrfs/ref-cache.h b/fs/btrfs/ref-cache.h index e2a55cb2072b..24f7001f6387 100644 --- a/fs/btrfs/ref-cache.h +++ b/fs/btrfs/ref-cache.h @@ -49,28 +49,4 @@ static inline size_t btrfs_leaf_ref_size(int nr_extents) return sizeof(struct btrfs_leaf_ref) + sizeof(struct btrfs_extent_info) * nr_extents; } - -static inline void btrfs_leaf_ref_tree_init(struct btrfs_leaf_ref_tree *tree) -{ - tree->root = RB_ROOT; - INIT_LIST_HEAD(&tree->list); - spin_lock_init(&tree->lock); -} - -static inline int btrfs_leaf_ref_tree_empty(struct btrfs_leaf_ref_tree *tree) -{ - return RB_EMPTY_ROOT(&tree->root); -} - -void btrfs_leaf_ref_tree_init(struct btrfs_leaf_ref_tree *tree); -struct btrfs_leaf_ref *btrfs_alloc_leaf_ref(struct btrfs_root *root, - int nr_extents); -void btrfs_free_leaf_ref(struct btrfs_root *root, struct btrfs_leaf_ref *ref); -struct btrfs_leaf_ref *btrfs_lookup_leaf_ref(struct btrfs_root *root, - u64 bytenr); -int btrfs_add_leaf_ref(struct btrfs_root *root, struct btrfs_leaf_ref *ref, - int shared); -int btrfs_remove_leaf_refs(struct btrfs_root *root, u64 max_root_gen, - int shared); -int btrfs_remove_leaf_ref(struct btrfs_root *root, struct btrfs_leaf_ref *ref); #endif diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index f7b799b151aa..f726e72dd362 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -507,6 +507,7 @@ static int update_backref_cache(struct btrfs_trans_handle *trans, return 1; } + static int should_ignore_root(struct btrfs_root *root) { struct btrfs_root *reloc_root; @@ -529,7 +530,6 @@ static int should_ignore_root(struct btrfs_root *root) */ return 1; } - /* * find reloc tree by address of tree root */ diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 59a94c1d9815..3bcfe5a7c330 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -21,53 +21,6 @@ #include "disk-io.h" #include "print-tree.h" -/* - * search forward for a root, starting with objectid 'search_start' - * if a root key is found, the objectid we find is filled into 'found_objectid' - * and 0 is returned. < 0 is returned on error, 1 if there is nothing - * left in the tree. - */ -int btrfs_search_root(struct btrfs_root *root, u64 search_start, - u64 *found_objectid) -{ - struct btrfs_path *path; - struct btrfs_key search_key; - int ret; - - root = root->fs_info->tree_root; - search_key.objectid = search_start; - search_key.type = (u8)-1; - search_key.offset = (u64)-1; - - path = btrfs_alloc_path(); - BUG_ON(!path); -again: - ret = btrfs_search_slot(NULL, root, &search_key, path, 0, 0); - if (ret < 0) - goto out; - if (ret == 0) { - ret = 1; - goto out; - } - if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) { - ret = btrfs_next_leaf(root, path); - if (ret) - goto out; - } - btrfs_item_key_to_cpu(path->nodes[0], &search_key, path->slots[0]); - if (search_key.type != BTRFS_ROOT_ITEM_KEY) { - search_key.offset++; - btrfs_release_path(path); - goto again; - } - ret = 0; - *found_objectid = search_key.objectid; - -out: - btrfs_free_path(path); - return ret; -} - /* * lookup the root with the highest offset for a given objectid. The key we do * find is copied into 'key'. If we find something return 0, otherwise 1, < 0 diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c index 4ce16ef702a3..ab9633fd72a4 100644 --- a/fs/btrfs/sysfs.c +++ b/fs/btrfs/sysfs.c @@ -189,71 +189,6 @@ static struct kobj_type btrfs_super_ktype = { /* /sys/fs/btrfs/ entry */ static struct kset *btrfs_kset; -int btrfs_sysfs_add_super(struct btrfs_fs_info *fs) -{ - int error; - char *name; - char c; - int len = strlen(fs->sb->s_id) + 1; - int i; - - name = kmalloc(len, GFP_NOFS); - if (!name) { - error = -ENOMEM; - goto fail; - } - - for (i = 0; i < len; i++) { - c = fs->sb->s_id[i]; - if (c == '/' || c == '\\') - c = '!'; - name[i] = c; - } - name[len] = '\0'; - - fs->super_kobj.kset = btrfs_kset; - error = kobject_init_and_add(&fs->super_kobj, &btrfs_super_ktype, - NULL, "%s", name); - kfree(name); - if (error) - goto fail; - - return 0; - -fail: - printk(KERN_ERR "btrfs: sysfs creation for super failed\n"); - return error; -} - -int btrfs_sysfs_add_root(struct btrfs_root *root) -{ - int error; - - error = kobject_init_and_add(&root->root_kobj, &btrfs_root_ktype, - &root->fs_info->super_kobj, - "%s", root->name); - if (error) - goto fail; - - return 0; - -fail: - printk(KERN_ERR "btrfs: sysfs creation for root failed\n"); - return error; -} - -void btrfs_sysfs_del_root(struct btrfs_root *root) -{ - kobject_put(&root->root_kobj); - wait_for_completion(&root->kobj_unregister); -} - -void btrfs_sysfs_del_super(struct btrfs_fs_info *fs) -{ - kobject_put(&fs->super_kobj); - wait_for_completion(&fs->kobj_unregister); -} - int btrfs_init_sysfs(void) { btrfs_kset = kset_create_and_add("btrfs", NULL, fs_kobj); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index e21130d3f98a..cd0b31a9ba3d 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -44,16 +44,6 @@ static int btrfs_relocate_sys_chunks(struct btrfs_root *root); static DEFINE_MUTEX(uuid_mutex); static LIST_HEAD(fs_uuids); -void btrfs_lock_volumes(void) -{ - mutex_lock(&uuid_mutex); -} - -void btrfs_unlock_volumes(void) -{ - mutex_unlock(&uuid_mutex); -} - static void lock_chunks(struct btrfs_root *root) { mutex_lock(&root->fs_info->chunk_mutex); @@ -3688,15 +3678,6 @@ static int read_one_dev(struct btrfs_root *root, return ret; } -int btrfs_read_super_device(struct btrfs_root *root, struct extent_buffer *buf) -{ - struct btrfs_dev_item *dev_item; - - dev_item = (struct btrfs_dev_item *)offsetof(struct btrfs_super_block, - dev_item); - return read_one_dev(root, buf, dev_item); -} - int btrfs_read_sys_array(struct btrfs_root *root) { struct btrfs_super_block *super_copy = &root->fs_info->super_copy; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index 036b276b4860..5669ae8ea1c9 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -196,7 +196,6 @@ void btrfs_mapping_init(struct btrfs_mapping_tree *tree); void btrfs_mapping_tree_free(struct btrfs_mapping_tree *tree); int btrfs_map_bio(struct btrfs_root *root, int rw, struct bio *bio, int mirror_num, int async_submit); -int btrfs_read_super_device(struct btrfs_root *root, struct extent_buffer *buf); int btrfs_open_devices(struct btrfs_fs_devices *fs_devices, fmode_t flags, void *holder); int btrfs_scan_one_device(const char *path, fmode_t flags, void *holder, @@ -216,8 +215,6 @@ struct btrfs_device *btrfs_find_device(struct btrfs_root *root, u64 devid, int btrfs_shrink_device(struct btrfs_device *device, u64 new_size); int btrfs_init_new_device(struct btrfs_root *root, char *path); int btrfs_balance(struct btrfs_root *dev_root); -void btrfs_unlock_volumes(void); -void btrfs_lock_volumes(void); int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset); int find_free_dev_extent(struct btrfs_trans_handle *trans, struct btrfs_device *device, u64 num_bytes, -- cgit v1.2.3 From 182608c8294b5fe90d7bbd4b026c82bf0a24b736 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Thu, 5 May 2011 13:13:16 +0200 Subject: btrfs: remove old unused commented out code Remove code which has been #if0-ed out for a very long time and does not seem to be related to current codebase anymore. Signed-off-by: David Sterba --- fs/btrfs/delayed-ref.c | 76 --- fs/btrfs/disk-io.c | 29 - fs/btrfs/extent-tree.c | 1661 +----------------------------------------------- fs/btrfs/inode.c | 172 ----- fs/btrfs/transaction.c | 134 ---- 5 files changed, 1 insertion(+), 2071 deletions(-) diff --git a/fs/btrfs/delayed-ref.c b/fs/btrfs/delayed-ref.c index cb9b9a431fc9..125cf76fcd08 100644 --- a/fs/btrfs/delayed-ref.c +++ b/fs/btrfs/delayed-ref.c @@ -709,79 +709,3 @@ btrfs_find_delayed_ref_head(struct btrfs_trans_handle *trans, u64 bytenr) return btrfs_delayed_node_to_head(ref); return NULL; } - -/* - * add a delayed ref to the tree. This does all of the accounting required - * to make sure the delayed ref is eventually processed before this - * transaction commits. - * - * The main point of this call is to add and remove a backreference in a single - * shot, taking the lock only once, and only searching for the head node once. - * - * It is the same as doing a ref add and delete in two separate calls. - */ -#if 0 -int btrfs_update_delayed_ref(struct btrfs_trans_handle *trans, - u64 bytenr, u64 num_bytes, u64 orig_parent, - u64 parent, u64 orig_ref_root, u64 ref_root, - u64 orig_ref_generation, u64 ref_generation, - u64 owner_objectid, int pin) -{ - struct btrfs_delayed_ref *ref; - struct btrfs_delayed_ref *old_ref; - struct btrfs_delayed_ref_head *head_ref; - struct btrfs_delayed_ref_root *delayed_refs; - int ret; - - ref = kmalloc(sizeof(*ref), GFP_NOFS); - if (!ref) - return -ENOMEM; - - old_ref = kmalloc(sizeof(*old_ref), GFP_NOFS); - if (!old_ref) { - kfree(ref); - return -ENOMEM; - } - - /* - * the parent = 0 case comes from cases where we don't actually - * know the parent yet. It will get updated later via a add/drop - * pair. - */ - if (parent == 0) - parent = bytenr; - if (orig_parent == 0) - orig_parent = bytenr; - - head_ref = kmalloc(sizeof(*head_ref), GFP_NOFS); - if (!head_ref) { - kfree(ref); - kfree(old_ref); - return -ENOMEM; - } - delayed_refs = &trans->transaction->delayed_refs; - spin_lock(&delayed_refs->lock); - - /* - * insert both the head node and the new ref without dropping - * the spin lock - */ - ret = __btrfs_add_delayed_ref(trans, &head_ref->node, bytenr, num_bytes, - (u64)-1, 0, 0, 0, - BTRFS_UPDATE_DELAYED_HEAD, 0); - BUG_ON(ret); - - ret = __btrfs_add_delayed_ref(trans, &ref->node, bytenr, num_bytes, - parent, ref_root, ref_generation, - owner_objectid, BTRFS_ADD_DELAYED_REF, 0); - BUG_ON(ret); - - ret = __btrfs_add_delayed_ref(trans, &old_ref->node, bytenr, num_bytes, - orig_parent, orig_ref_root, - orig_ref_generation, owner_objectid, - BTRFS_DROP_DELAYED_REF, pin); - BUG_ON(ret); - spin_unlock(&delayed_refs->lock); - return 0; -} -#endif diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index fa287c551ffc..de7b4770ab17 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1348,35 +1348,6 @@ fail: return ERR_PTR(ret); } -#if 0 - struct btrfs_root *root; - int ret; - - root = btrfs_read_fs_root_no_name(fs_info, location); - if (!root) - return NULL; - - if (root->in_sysfs) - return root; - - ret = btrfs_set_root_name(root, name, namelen); - if (ret) { - free_extent_buffer(root->node); - kfree(root); - return ERR_PTR(ret); - } - - ret = btrfs_sysfs_add_root(root); - if (ret) { - free_extent_buffer(root->node); - kfree(root->name); - kfree(root); - return ERR_PTR(ret); - } - root->in_sysfs = 1; - return root; -#endif - static int btrfs_congested_fn(void *congested_data, int bdi_bits) { struct btrfs_fs_info *info = (struct btrfs_fs_info *)congested_data; diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index fba1348cb2a0..b457f195636e 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2522,126 +2522,6 @@ out: return ret; } -#if 0 -int btrfs_cache_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root, - struct extent_buffer *buf, u32 nr_extents) -{ - struct btrfs_key key; - struct btrfs_file_extent_item *fi; - u64 root_gen; - u32 nritems; - int i; - int level; - int ret = 0; - int shared = 0; - - if (!root->ref_cows) - return 0; - - if (root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID) { - shared = 0; - root_gen = root->root_key.offset; - } else { - shared = 1; - root_gen = trans->transid - 1; - } - - level = btrfs_header_level(buf); - nritems = btrfs_header_nritems(buf); - - if (level == 0) { - struct btrfs_leaf_ref *ref; - struct btrfs_extent_info *info; - - ref = btrfs_alloc_leaf_ref(root, nr_extents); - if (!ref) { - ret = -ENOMEM; - goto out; - } - - ref->root_gen = root_gen; - ref->bytenr = buf->start; - ref->owner = btrfs_header_owner(buf); - ref->generation = btrfs_header_generation(buf); - ref->nritems = nr_extents; - info = ref->extents; - - for (i = 0; nr_extents > 0 && i < nritems; i++) { - u64 disk_bytenr; - btrfs_item_key_to_cpu(buf, &key, i); - if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY) - continue; - fi = btrfs_item_ptr(buf, i, - struct btrfs_file_extent_item); - if (btrfs_file_extent_type(buf, fi) == - BTRFS_FILE_EXTENT_INLINE) - continue; - disk_bytenr = btrfs_file_extent_disk_bytenr(buf, fi); - if (disk_bytenr == 0) - continue; - - info->bytenr = disk_bytenr; - info->num_bytes = - btrfs_file_extent_disk_num_bytes(buf, fi); - info->objectid = key.objectid; - info->offset = key.offset; - info++; - } - - ret = btrfs_add_leaf_ref(root, ref, shared); - if (ret == -EEXIST && shared) { - struct btrfs_leaf_ref *old; - old = btrfs_lookup_leaf_ref(root, ref->bytenr); - BUG_ON(!old); - btrfs_remove_leaf_ref(root, old); - btrfs_free_leaf_ref(root, old); - ret = btrfs_add_leaf_ref(root, ref, shared); - } - WARN_ON(ret); - btrfs_free_leaf_ref(root, ref); - } -out: - return ret; -} - -/* when a block goes through cow, we update the reference counts of - * everything that block points to. The internal pointers of the block - * can be in just about any order, and it is likely to have clusters of - * things that are close together and clusters of things that are not. - * - * To help reduce the seeks that come with updating all of these reference - * counts, sort them by byte number before actual updates are done. - * - * struct refsort is used to match byte number to slot in the btree block. - * we sort based on the byte number and then use the slot to actually - * find the item. - * - * struct refsort is smaller than strcut btrfs_item and smaller than - * struct btrfs_key_ptr. Since we're currently limited to the page size - * for a btree block, there's no way for a kmalloc of refsorts for a - * single node to be bigger than a page. - */ -struct refsort { - u64 bytenr; - u32 slot; -}; - -/* - * for passing into sort() - */ -static int refsort_cmp(const void *a_void, const void *b_void) -{ - const struct refsort *a = a_void; - const struct refsort *b = b_void; - - if (a->bytenr < b->bytenr) - return -1; - if (a->bytenr > b->bytenr) - return 1; - return 0; -} -#endif - static int __btrfs_mod_ref(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct extent_buffer *buf, @@ -3223,18 +3103,6 @@ commit_trans: goto again; } -#if 0 /* I hope we never need this code again, just in case */ - printk(KERN_ERR "no space left, need %llu, %llu bytes_used, " - "%llu bytes_reserved, " "%llu bytes_pinned, " - "%llu bytes_readonly, %llu may use %llu total\n", - (unsigned long long)bytes, - (unsigned long long)data_sinfo->bytes_used, - (unsigned long long)data_sinfo->bytes_reserved, - (unsigned long long)data_sinfo->bytes_pinned, - (unsigned long long)data_sinfo->bytes_readonly, - (unsigned long long)data_sinfo->bytes_may_use, - (unsigned long long)data_sinfo->total_bytes); -#endif return -ENOSPC; } data_sinfo->bytes_may_use += bytes; @@ -3867,23 +3735,7 @@ static u64 calc_global_metadata_size(struct btrfs_fs_info *fs_info) u64 meta_used; u64 data_used; int csum_size = btrfs_super_csum_size(&fs_info->super_copy); -#if 0 - /* - * per tree used space accounting can be inaccuracy, so we - * can't rely on it. - */ - spin_lock(&fs_info->extent_root->accounting_lock); - num_bytes = btrfs_root_used(&fs_info->extent_root->root_item); - spin_unlock(&fs_info->extent_root->accounting_lock); - spin_lock(&fs_info->csum_root->accounting_lock); - num_bytes += btrfs_root_used(&fs_info->csum_root->root_item); - spin_unlock(&fs_info->csum_root->accounting_lock); - - spin_lock(&fs_info->tree_root->accounting_lock); - num_bytes += btrfs_root_used(&fs_info->tree_root->root_item); - spin_unlock(&fs_info->tree_root->accounting_lock); -#endif sinfo = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_DATA); spin_lock(&sinfo->lock); data_used = sinfo->bytes_used; @@ -3936,10 +3788,7 @@ static void update_global_block_rsv(struct btrfs_fs_info *fs_info) block_rsv->reserved = block_rsv->size; block_rsv->full = 1; } -#if 0 - printk(KERN_INFO"global block rsv size %llu reserved %llu\n", - block_rsv->size, block_rsv->reserved); -#endif + spin_unlock(&sinfo->lock); spin_unlock(&block_rsv->lock); } @@ -6596,1514 +6445,6 @@ int btrfs_drop_subtree(struct btrfs_trans_handle *trans, return ret; } -#if 0 -static unsigned long calc_ra(unsigned long start, unsigned long last, - unsigned long nr) -{ - return min(last, start + nr - 1); -} - -static noinline int relocate_inode_pages(struct inode *inode, u64 start, - u64 len) -{ - u64 page_start; - u64 page_end; - unsigned long first_index; - unsigned long last_index; - unsigned long i; - struct page *page; - struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; - struct file_ra_state *ra; - struct btrfs_ordered_extent *ordered; - unsigned int total_read = 0; - unsigned int total_dirty = 0; - int ret = 0; - - ra = kzalloc(sizeof(*ra), GFP_NOFS); - if (!ra) - return -ENOMEM; - - mutex_lock(&inode->i_mutex); - first_index = start >> PAGE_CACHE_SHIFT; - last_index = (start + len - 1) >> PAGE_CACHE_SHIFT; - - /* make sure the dirty trick played by the caller work */ - ret = invalidate_inode_pages2_range(inode->i_mapping, - first_index, last_index); - if (ret) - goto out_unlock; - - file_ra_state_init(ra, inode->i_mapping); - - for (i = first_index ; i <= last_index; i++) { - if (total_read % ra->ra_pages == 0) { - btrfs_force_ra(inode->i_mapping, ra, NULL, i, - calc_ra(i, last_index, ra->ra_pages)); - } - total_read++; -again: - if (((u64)i << PAGE_CACHE_SHIFT) > i_size_read(inode)) - BUG_ON(1); - page = grab_cache_page(inode->i_mapping, i); - if (!page) { - ret = -ENOMEM; - goto out_unlock; - } - if (!PageUptodate(page)) { - btrfs_readpage(NULL, page); - lock_page(page); - if (!PageUptodate(page)) { - unlock_page(page); - page_cache_release(page); - ret = -EIO; - goto out_unlock; - } - } - wait_on_page_writeback(page); - - page_start = (u64)page->index << PAGE_CACHE_SHIFT; - page_end = page_start + PAGE_CACHE_SIZE - 1; - lock_extent(io_tree, page_start, page_end, GFP_NOFS); - - ordered = btrfs_lookup_ordered_extent(inode, page_start); - if (ordered) { - unlock_extent(io_tree, page_start, page_end, GFP_NOFS); - unlock_page(page); - page_cache_release(page); - btrfs_start_ordered_extent(inode, ordered, 1); - btrfs_put_ordered_extent(ordered); - goto again; - } - set_page_extent_mapped(page); - - if (i == first_index) - set_extent_bits(io_tree, page_start, page_end, - EXTENT_BOUNDARY, GFP_NOFS); - btrfs_set_extent_delalloc(inode, page_start, page_end); - - set_page_dirty(page); - total_dirty++; - - unlock_extent(io_tree, page_start, page_end, GFP_NOFS); - unlock_page(page); - page_cache_release(page); - } - -out_unlock: - kfree(ra); - mutex_unlock(&inode->i_mutex); - balance_dirty_pages_ratelimited_nr(inode->i_mapping, total_dirty); - return ret; -} - -static noinline int relocate_data_extent(struct inode *reloc_inode, - struct btrfs_key *extent_key, - u64 offset) -{ - struct btrfs_root *root = BTRFS_I(reloc_inode)->root; - struct extent_map_tree *em_tree = &BTRFS_I(reloc_inode)->extent_tree; - struct extent_map *em; - u64 start = extent_key->objectid - offset; - u64 end = start + extent_key->offset - 1; - - em = alloc_extent_map(); - BUG_ON(!em); - - em->start = start; - em->len = extent_key->offset; - em->block_len = extent_key->offset; - em->block_start = extent_key->objectid; - em->bdev = root->fs_info->fs_devices->latest_bdev; - set_bit(EXTENT_FLAG_PINNED, &em->flags); - - /* setup extent map to cheat btrfs_readpage */ - lock_extent(&BTRFS_I(reloc_inode)->io_tree, start, end, GFP_NOFS); - while (1) { - int ret; - write_lock(&em_tree->lock); - ret = add_extent_mapping(em_tree, em); - write_unlock(&em_tree->lock); - if (ret != -EEXIST) { - free_extent_map(em); - break; - } - btrfs_drop_extent_cache(reloc_inode, start, end, 0); - } - unlock_extent(&BTRFS_I(reloc_inode)->io_tree, start, end, GFP_NOFS); - - return relocate_inode_pages(reloc_inode, start, extent_key->offset); -} - -struct btrfs_ref_path { - u64 extent_start; - u64 nodes[BTRFS_MAX_LEVEL]; - u64 root_objectid; - u64 root_generation; - u64 owner_objectid; - u32 num_refs; - int lowest_level; - int current_level; - int shared_level; - - struct btrfs_key node_keys[BTRFS_MAX_LEVEL]; - u64 new_nodes[BTRFS_MAX_LEVEL]; -}; - -struct disk_extent { - u64 ram_bytes; - u64 disk_bytenr; - u64 disk_num_bytes; - u64 offset; - u64 num_bytes; - u8 compression; - u8 encryption; - u16 other_encoding; -}; - -static int is_cowonly_root(u64 root_objectid) -{ - if (root_objectid == BTRFS_ROOT_TREE_OBJECTID || - root_objectid == BTRFS_EXTENT_TREE_OBJECTID || - root_objectid == BTRFS_CHUNK_TREE_OBJECTID || - root_objectid == BTRFS_DEV_TREE_OBJECTID || - root_objectid == BTRFS_TREE_LOG_OBJECTID || - root_objectid == BTRFS_CSUM_TREE_OBJECTID) - return 1; - return 0; -} - -static noinline int __next_ref_path(struct btrfs_trans_handle *trans, - struct btrfs_root *extent_root, - struct btrfs_ref_path *ref_path, - int first_time) -{ - struct extent_buffer *leaf; - struct btrfs_path *path; - struct btrfs_extent_ref *ref; - struct btrfs_key key; - struct btrfs_key found_key; - u64 bytenr; - u32 nritems; - int level; - int ret = 1; - - path = btrfs_alloc_path(); - if (!path) - return -ENOMEM; - - if (first_time) { - ref_path->lowest_level = -1; - ref_path->current_level = -1; - ref_path->shared_level = -1; - goto walk_up; - } -walk_down: - level = ref_path->current_level - 1; - while (level >= -1) { - u64 parent; - if (level < ref_path->lowest_level) - break; - - if (level >= 0) - bytenr = ref_path->nodes[level]; - else - bytenr = ref_path->extent_start; - BUG_ON(bytenr == 0); - - parent = ref_path->nodes[level + 1]; - ref_path->nodes[level + 1] = 0; - ref_path->current_level = level; - BUG_ON(parent == 0); - - key.objectid = bytenr; - key.offset = parent + 1; - key.type = BTRFS_EXTENT_REF_KEY; - - ret = btrfs_search_slot(trans, extent_root, &key, path, 0, 0); - if (ret < 0) - goto out; - BUG_ON(ret == 0); - - leaf = path->nodes[0]; - nritems = btrfs_header_nritems(leaf); - if (path->slots[0] >= nritems) { - ret = btrfs_next_leaf(extent_root, path); - if (ret < 0) - goto out; - if (ret > 0) - goto next; - leaf = path->nodes[0]; - } - - btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); - if (found_key.objectid == bytenr && - found_key.type == BTRFS_EXTENT_REF_KEY) { - if (level < ref_path->shared_level) - ref_path->shared_level = level; - goto found; - } -next: - level--; - btrfs_release_path(extent_root, path); - cond_resched(); - } - /* reached lowest level */ - ret = 1; - goto out; -walk_up: - level = ref_path->current_level; - while (level < BTRFS_MAX_LEVEL - 1) { - u64 ref_objectid; - - if (level >= 0) - bytenr = ref_path->nodes[level]; - else - bytenr = ref_path->extent_start; - - BUG_ON(bytenr == 0); - - key.objectid = bytenr; - key.offset = 0; - key.type = BTRFS_EXTENT_REF_KEY; - - ret = btrfs_search_slot(trans, extent_root, &key, path, 0, 0); - if (ret < 0) - goto out; - - leaf = path->nodes[0]; - nritems = btrfs_header_nritems(leaf); - if (path->slots[0] >= nritems) { - ret = btrfs_next_leaf(extent_root, path); - if (ret < 0) - goto out; - if (ret > 0) { - /* the extent was freed by someone */ - if (ref_path->lowest_level == level) - goto out; - btrfs_release_path(extent_root, path); - goto walk_down; - } - leaf = path->nodes[0]; - } - - btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); - if (found_key.objectid != bytenr || - found_key.type != BTRFS_EXTENT_REF_KEY) { - /* the extent was freed by someone */ - if (ref_path->lowest_level == level) { - ret = 1; - goto out; - } - btrfs_release_path(extent_root, path); - goto walk_down; - } -found: - ref = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_extent_ref); - ref_objectid = btrfs_ref_objectid(leaf, ref); - if (ref_objectid < BTRFS_FIRST_FREE_OBJECTID) { - if (first_time) { - level = (int)ref_objectid; - BUG_ON(level >= BTRFS_MAX_LEVEL); - ref_path->lowest_level = level; - ref_path->current_level = level; - ref_path->nodes[level] = bytenr; - } else { - WARN_ON(ref_objectid != level); - } - } else { - WARN_ON(level != -1); - } - first_time = 0; - - if (ref_path->lowest_level == level) { - ref_path->owner_objectid = ref_objectid; - ref_path->num_refs = btrfs_ref_num_refs(leaf, ref); - } - - /* - * the block is tree root or the block isn't in reference - * counted tree. - */ - if (found_key.objectid == found_key.offset || - is_cowonly_root(btrfs_ref_root(leaf, ref))) { - ref_path->root_objectid = btrfs_ref_root(leaf, ref); - ref_path->root_generation = - btrfs_ref_generation(leaf, ref); - if (level < 0) { - /* special reference from the tree log */ - ref_path->nodes[0] = found_key.offset; - ref_path->current_level = 0; - } - ret = 0; - goto out; - } - - level++; - BUG_ON(ref_path->nodes[level] != 0); - ref_path->nodes[level] = found_key.offset; - ref_path->current_level = level; - - /* - * the reference was created in the running transaction, - * no need to continue walking up. - */ - if (btrfs_ref_generation(leaf, ref) == trans->transid) { - ref_path->root_objectid = btrfs_ref_root(leaf, ref); - ref_path->root_generation = - btrfs_ref_generation(leaf, ref); - ret = 0; - goto out; - } - - btrfs_release_path(extent_root, path); - cond_resched(); - } - /* reached max tree level, but no tree root found. */ - BUG(); -out: - btrfs_free_path(path); - return ret; -} - -static int btrfs_first_ref_path(struct btrfs_trans_handle *trans, - struct btrfs_root *extent_root, - struct btrfs_ref_path *ref_path, - u64 extent_start) -{ - memset(ref_path, 0, sizeof(*ref_path)); - ref_path->extent_start = extent_start; - - return __next_ref_path(trans, extent_root, ref_path, 1); -} - -static int btrfs_next_ref_path(struct btrfs_trans_handle *trans, - struct btrfs_root *extent_root, - struct btrfs_ref_path *ref_path) -{ - return __next_ref_path(trans, extent_root, ref_path, 0); -} - -static noinline int get_new_locations(struct inode *reloc_inode, - struct btrfs_key *extent_key, - u64 offset, int no_fragment, - struct disk_extent **extents, - int *nr_extents) -{ - struct btrfs_root *root = BTRFS_I(reloc_inode)->root; - struct btrfs_path *path; - struct btrfs_file_extent_item *fi; - struct extent_buffer *leaf; - struct disk_extent *exts = *extents; - struct btrfs_key found_key; - u64 cur_pos; - u64 last_byte; - u32 nritems; - int nr = 0; - int max = *nr_extents; - int ret; - - WARN_ON(!no_fragment && *extents); - if (!exts) { - max = 1; - exts = kmalloc(sizeof(*exts) * max, GFP_NOFS); - if (!exts) - return -ENOMEM; - } - - path = btrfs_alloc_path(); - if (!path) { - if (exts != *extents) - kfree(exts); - return -ENOMEM; - } - - cur_pos = extent_key->objectid - offset; - last_byte = extent_key->objectid + extent_key->offset; - ret = btrfs_lookup_file_extent(NULL, root, path, reloc_inode->i_ino, - cur_pos, 0); - if (ret < 0) - goto out; - if (ret > 0) { - ret = -ENOENT; - goto out; - } - - while (1) { - leaf = path->nodes[0]; - nritems = btrfs_header_nritems(leaf); - if (path->slots[0] >= nritems) { - ret = btrfs_next_leaf(root, path); - if (ret < 0) - goto out; - if (ret > 0) - break; - leaf = path->nodes[0]; - } - - btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); - if (found_key.offset != cur_pos || - found_key.type != BTRFS_EXTENT_DATA_KEY || - found_key.objectid != reloc_inode->i_ino) - break; - - fi = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_file_extent_item); - if (btrfs_file_extent_type(leaf, fi) != - BTRFS_FILE_EXTENT_REG || - btrfs_file_extent_disk_bytenr(leaf, fi) == 0) - break; - - if (nr == max) { - struct disk_extent *old = exts; - max *= 2; - exts = kzalloc(sizeof(*exts) * max, GFP_NOFS); - if (!exts) { - ret = -ENOMEM; - goto out; - } - memcpy(exts, old, sizeof(*exts) * nr); - if (old != *extents) - kfree(old); - } - - exts[nr].disk_bytenr = - btrfs_file_extent_disk_bytenr(leaf, fi); - exts[nr].disk_num_bytes = - btrfs_file_extent_disk_num_bytes(leaf, fi); - exts[nr].offset = btrfs_file_extent_offset(leaf, fi); - exts[nr].num_bytes = btrfs_file_extent_num_bytes(leaf, fi); - exts[nr].ram_bytes = btrfs_file_extent_ram_bytes(leaf, fi); - exts[nr].compression = btrfs_file_extent_compression(leaf, fi); - exts[nr].encryption = btrfs_file_extent_encryption(leaf, fi); - exts[nr].other_encoding = btrfs_file_extent_other_encoding(leaf, - fi); - BUG_ON(exts[nr].offset > 0); - BUG_ON(exts[nr].compression || exts[nr].encryption); - BUG_ON(exts[nr].num_bytes != exts[nr].disk_num_bytes); - - cur_pos += exts[nr].num_bytes; - nr++; - - if (cur_pos + offset >= last_byte) - break; - - if (no_fragment) { - ret = 1; - goto out; - } - path->slots[0]++; - } - - BUG_ON(cur_pos + offset > last_byte); - if (cur_pos + offset < last_byte) { - ret = -ENOENT; - goto out; - } - ret = 0; -out: - btrfs_free_path(path); - if (ret) { - if (exts != *extents) - kfree(exts); - } else { - *extents = exts; - *nr_extents = nr; - } - return ret; -} - -static noinline int replace_one_extent(struct btrfs_trans_handle *trans, - struct btrfs_root *root, - struct btrfs_path *path, - struct btrfs_key *extent_key, - struct btrfs_key *leaf_key, - struct btrfs_ref_path *ref_path, - struct disk_extent *new_extents, - int nr_extents) -{ - struct extent_buffer *leaf; - struct btrfs_file_extent_item *fi; - struct inode *inode = NULL; - struct btrfs_key key; - u64 lock_start = 0; - u64 lock_end = 0; - u64 num_bytes; - u64 ext_offset; - u64 search_end = (u64)-1; - u32 nritems; - int nr_scaned = 0; - int extent_locked = 0; - int extent_type; - int ret; - - memcpy(&key, leaf_key, sizeof(key)); - if (ref_path->owner_objectid != BTRFS_MULTIPLE_OBJECTIDS) { - if (key.objectid < ref_path->owner_objectid || - (key.objectid == ref_path->owner_objectid && - key.type < BTRFS_EXTENT_DATA_KEY)) { - key.objectid = ref_path->owner_objectid; - key.type = BTRFS_EXTENT_DATA_KEY; - key.offset = 0; - } - } - - while (1) { - ret = btrfs_search_slot(trans, root, &key, path, 0, 1); - if (ret < 0) - goto out; - - leaf = path->nodes[0]; - nritems = btrfs_header_nritems(leaf); -next: - if (extent_locked && ret > 0) { - /* - * the file extent item was modified by someone - * before the extent got locked. - */ - unlock_extent(&BTRFS_I(inode)->io_tree, lock_start, - lock_end, GFP_NOFS); - extent_locked = 0; - } - - if (path->slots[0] >= nritems) { - if (++nr_scaned > 2) - break; - - BUG_ON(extent_locked); - ret = btrfs_next_leaf(root, path); - if (ret < 0) - goto out; - if (ret > 0) - break; - leaf = path->nodes[0]; - nritems = btrfs_header_nritems(leaf); - } - - btrfs_item_key_to_cpu(leaf, &key, path->slots[0]); - - if (ref_path->owner_objectid != BTRFS_MULTIPLE_OBJECTIDS) { - if ((key.objectid > ref_path->owner_objectid) || - (key.objectid == ref_path->owner_objectid && - key.type > BTRFS_EXTENT_DATA_KEY) || - key.offset >= search_end) - break; - } - - if (inode && key.objectid != inode->i_ino) { - BUG_ON(extent_locked); - btrfs_release_path(root, path); - mutex_unlock(&inode->i_mutex); - iput(inode); - inode = NULL; - continue; - } - - if (key.type != BTRFS_EXTENT_DATA_KEY) { - path->slots[0]++; - ret = 1; - goto next; - } - fi = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_file_extent_item); - extent_type = btrfs_file_extent_type(leaf, fi); - if ((extent_type != BTRFS_FILE_EXTENT_REG && - extent_type != BTRFS_FILE_EXTENT_PREALLOC) || - (btrfs_file_extent_disk_bytenr(leaf, fi) != - extent_key->objectid)) { - path->slots[0]++; - ret = 1; - goto next; - } - - num_bytes = btrfs_file_extent_num_bytes(leaf, fi); - ext_offset = btrfs_file_extent_offset(leaf, fi); - - if (search_end == (u64)-1) { - search_end = key.offset - ext_offset + - btrfs_file_extent_ram_bytes(leaf, fi); - } - - if (!extent_locked) { - lock_start = key.offset; - lock_end = lock_start + num_bytes - 1; - } else { - if (lock_start > key.offset || - lock_end + 1 < key.offset + num_bytes) { - unlock_extent(&BTRFS_I(inode)->io_tree, - lock_start, lock_end, GFP_NOFS); - extent_locked = 0; - } - } - - if (!inode) { - btrfs_release_path(root, path); - - inode = btrfs_iget_locked(root->fs_info->sb, - key.objectid, root); - if (inode->i_state & I_NEW) { - BTRFS_I(inode)->root = root; - BTRFS_I(inode)->location.objectid = - key.objectid; - BTRFS_I(inode)->location.type = - BTRFS_INODE_ITEM_KEY; - BTRFS_I(inode)->location.offset = 0; - btrfs_read_locked_inode(inode); - unlock_new_inode(inode); - } - /* - * some code call btrfs_commit_transaction while - * holding the i_mutex, so we can't use mutex_lock - * here. - */ - if (is_bad_inode(inode) || - !mutex_trylock(&inode->i_mutex)) { - iput(inode); - inode = NULL; - key.offset = (u64)-1; - goto skip; - } - } - - if (!extent_locked) { - struct btrfs_ordered_extent *ordered; - - btrfs_release_path(root, path); - - lock_extent(&BTRFS_I(inode)->io_tree, lock_start, - lock_end, GFP_NOFS); - ordered = btrfs_lookup_first_ordered_extent(inode, - lock_end); - if (ordered && - ordered->file_offset <= lock_end && - ordered->file_offset + ordered->len > lock_start) { - unlock_extent(&BTRFS_I(inode)->io_tree, - lock_start, lock_end, GFP_NOFS); - btrfs_start_ordered_extent(inode, ordered, 1); - btrfs_put_ordered_extent(ordered); - key.offset += num_bytes; - goto skip; - } - if (ordered) - btrfs_put_ordered_extent(ordered); - - extent_locked = 1; - continue; - } - - if (nr_extents == 1) { - /* update extent pointer in place */ - btrfs_set_file_extent_disk_bytenr(leaf, fi, - new_extents[0].disk_bytenr); - btrfs_set_file_extent_disk_num_bytes(leaf, fi, - new_extents[0].disk_num_bytes); - btrfs_mark_buffer_dirty(leaf); - - btrfs_drop_extent_cache(inode, key.offset, - key.offset + num_bytes - 1, 0); - - ret = btrfs_inc_extent_ref(trans, root, - new_extents[0].disk_bytenr, - new_extents[0].disk_num_bytes, - leaf->start, - root->root_key.objectid, - trans->transid, - key.objectid); - BUG_ON(ret); - - ret = btrfs_free_extent(trans, root, - extent_key->objectid, - extent_key->offset, - leaf->start, - btrfs_header_owner(leaf), - btrfs_header_generation(leaf), - key.objectid, 0); - BUG_ON(ret); - - btrfs_release_path(root, path); - key.offset += num_bytes; - } else { - BUG_ON(1); -#if 0 - u64 alloc_hint; - u64 extent_len; - int i; - /* - * drop old extent pointer at first, then insert the - * new pointers one bye one - */ - btrfs_release_path(root, path); - ret = btrfs_drop_extents(trans, root, inode, key.offset, - key.offset + num_bytes, - key.offset, &alloc_hint); - BUG_ON(ret); - - for (i = 0; i < nr_extents; i++) { - if (ext_offset >= new_extents[i].num_bytes) { - ext_offset -= new_extents[i].num_bytes; - continue; - } - extent_len = min(new_extents[i].num_bytes - - ext_offset, num_bytes); - - ret = btrfs_insert_empty_item(trans, root, - path, &key, - sizeof(*fi)); - BUG_ON(ret); - - leaf = path->nodes[0]; - fi = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_file_extent_item); - btrfs_set_file_extent_generation(leaf, fi, - trans->transid); - btrfs_set_file_extent_type(leaf, fi, - BTRFS_FILE_EXTENT_REG); - btrfs_set_file_extent_disk_bytenr(leaf, fi, - new_extents[i].disk_bytenr); - btrfs_set_file_extent_disk_num_bytes(leaf, fi, - new_extents[i].disk_num_bytes); - btrfs_set_file_extent_ram_bytes(leaf, fi, - new_extents[i].ram_bytes); - - btrfs_set_file_extent_compression(leaf, fi, - new_extents[i].compression); - btrfs_set_file_extent_encryption(leaf, fi, - new_extents[i].encryption); - btrfs_set_file_extent_other_encoding(leaf, fi, - new_extents[i].other_encoding); - - btrfs_set_file_extent_num_bytes(leaf, fi, - extent_len); - ext_offset += new_extents[i].offset; - btrfs_set_file_extent_offset(leaf, fi, - ext_offset); - btrfs_mark_buffer_dirty(leaf); - - btrfs_drop_extent_cache(inode, key.offset, - key.offset + extent_len - 1, 0); - - ret = btrfs_inc_extent_ref(trans, root, - new_extents[i].disk_bytenr, - new_extents[i].disk_num_bytes, - leaf->start, - root->root_key.objectid, - trans->transid, key.objectid); - BUG_ON(ret); - btrfs_release_path(root, path); - - inode_add_bytes(inode, extent_len); - - ext_offset = 0; - num_bytes -= extent_len; - key.offset += extent_len; - - if (num_bytes == 0) - break; - } - BUG_ON(i >= nr_extents); -#endif - } - - if (extent_locked) { - unlock_extent(&BTRFS_I(inode)->io_tree, lock_start, - lock_end, GFP_NOFS); - extent_locked = 0; - } -skip: - if (ref_path->owner_objectid != BTRFS_MULTIPLE_OBJECTIDS && - key.offset >= search_end) - break; - - cond_resched(); - } - ret = 0; -out: - btrfs_release_path(root, path); - if (inode) { - mutex_unlock(&inode->i_mutex); - if (extent_locked) { - unlock_extent(&BTRFS_I(inode)->io_tree, lock_start, - lock_end, GFP_NOFS); - } - iput(inode); - } - return ret; -} - -int btrfs_reloc_tree_cache_ref(struct btrfs_trans_handle *trans, - struct btrfs_root *root, - struct extent_buffer *buf, u64 orig_start) -{ - int level; - int ret; - - BUG_ON(btrfs_header_generation(buf) != trans->transid); - BUG_ON(root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID); - - level = btrfs_header_level(buf); - if (level == 0) { - struct btrfs_leaf_ref *ref; - struct btrfs_leaf_ref *orig_ref; - - orig_ref = btrfs_lookup_leaf_ref(root, orig_start); - if (!orig_ref) - return -ENOENT; - - ref = btrfs_alloc_leaf_ref(root, orig_ref->nritems); - if (!ref) { - btrfs_free_leaf_ref(root, orig_ref); - return -ENOMEM; - } - - ref->nritems = orig_ref->nritems; - memcpy(ref->extents, orig_ref->extents, - sizeof(ref->extents[0]) * ref->nritems); - - btrfs_free_leaf_ref(root, orig_ref); - - ref->root_gen = trans->transid; - ref->bytenr = buf->start; - ref->owner = btrfs_header_owner(buf); - ref->generation = btrfs_header_generation(buf); - - ret = btrfs_add_leaf_ref(root, ref, 0); - WARN_ON(ret); - btrfs_free_leaf_ref(root, ref); - } - return 0; -} - -static noinline int invalidate_extent_cache(struct btrfs_root *root, - struct extent_buffer *leaf, - struct btrfs_block_group_cache *group, - struct btrfs_root *target_root) -{ - struct btrfs_key key; - struct inode *inode = NULL; - struct btrfs_file_extent_item *fi; - struct extent_state *cached_state = NULL; - u64 num_bytes; - u64 skip_objectid = 0; - u32 nritems; - u32 i; - - nritems = btrfs_header_nritems(leaf); - for (i = 0; i < nritems; i++) { - btrfs_item_key_to_cpu(leaf, &key, i); - if (key.objectid == skip_objectid || - key.type != BTRFS_EXTENT_DATA_KEY) - continue; - fi = btrfs_item_ptr(leaf, i, struct btrfs_file_extent_item); - if (btrfs_file_extent_type(leaf, fi) == - BTRFS_FILE_EXTENT_INLINE) - continue; - if (btrfs_file_extent_disk_bytenr(leaf, fi) == 0) - continue; - if (!inode || inode->i_ino != key.objectid) { - iput(inode); - inode = btrfs_ilookup(target_root->fs_info->sb, - key.objectid, target_root, 1); - } - if (!inode) { - skip_objectid = key.objectid; - continue; - } - num_bytes = btrfs_file_extent_num_bytes(leaf, fi); - - lock_extent_bits(&BTRFS_I(inode)->io_tree, key.offset, - key.offset + num_bytes - 1, 0, &cached_state, - GFP_NOFS); - btrfs_drop_extent_cache(inode, key.offset, - key.offset + num_bytes - 1, 1); - unlock_extent_cached(&BTRFS_I(inode)->io_tree, key.offset, - key.offset + num_bytes - 1, &cached_state, - GFP_NOFS); - cond_resched(); - } - iput(inode); - return 0; -} - -static noinline int replace_extents_in_leaf(struct btrfs_trans_handle *trans, - struct btrfs_root *root, - struct extent_buffer *leaf, - struct btrfs_block_group_cache *group, - struct inode *reloc_inode) -{ - struct btrfs_key key; - struct btrfs_key extent_key; - struct btrfs_file_extent_item *fi; - struct btrfs_leaf_ref *ref; - struct disk_extent *new_extent; - u64 bytenr; - u64 num_bytes; - u32 nritems; - u32 i; - int ext_index; - int nr_extent; - int ret; - - new_extent = kmalloc(sizeof(*new_extent), GFP_NOFS); - if (!new_extent) - return -ENOMEM; - - ref = btrfs_lookup_leaf_ref(root, leaf->start); - BUG_ON(!ref); - - ext_index = -1; - nritems = btrfs_header_nritems(leaf); - for (i = 0; i < nritems; i++) { - btrfs_item_key_to_cpu(leaf, &key, i); - if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY) - continue; - fi = btrfs_item_ptr(leaf, i, struct btrfs_file_extent_item); - if (btrfs_file_extent_type(leaf, fi) == - BTRFS_FILE_EXTENT_INLINE) - continue; - bytenr = btrfs_file_extent_disk_bytenr(leaf, fi); - num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi); - if (bytenr == 0) - continue; - - ext_index++; - if (bytenr >= group->key.objectid + group->key.offset || - bytenr + num_bytes <= group->key.objectid) - continue; - - extent_key.objectid = bytenr; - extent_key.offset = num_bytes; - extent_key.type = BTRFS_EXTENT_ITEM_KEY; - nr_extent = 1; - ret = get_new_locations(reloc_inode, &extent_key, - group->key.objectid, 1, - &new_extent, &nr_extent); - if (ret > 0) - continue; - BUG_ON(ret < 0); - - BUG_ON(ref->extents[ext_index].bytenr != bytenr); - BUG_ON(ref->extents[ext_index].num_bytes != num_bytes); - ref->extents[ext_index].bytenr = new_extent->disk_bytenr; - ref->extents[ext_index].num_bytes = new_extent->disk_num_bytes; - - btrfs_set_file_extent_disk_bytenr(leaf, fi, - new_extent->disk_bytenr); - btrfs_set_file_extent_disk_num_bytes(leaf, fi, - new_extent->disk_num_bytes); - btrfs_mark_buffer_dirty(leaf); - - ret = btrfs_inc_extent_ref(trans, root, - new_extent->disk_bytenr, - new_extent->disk_num_bytes, - leaf->start, - root->root_key.objectid, - trans->transid, key.objectid); - BUG_ON(ret); - - ret = btrfs_free_extent(trans, root, - bytenr, num_bytes, leaf->start, - btrfs_header_owner(leaf), - btrfs_header_generation(leaf), - key.objectid, 0); - BUG_ON(ret); - cond_resched(); - } - kfree(new_extent); - BUG_ON(ext_index + 1 != ref->nritems); - btrfs_free_leaf_ref(root, ref); - return 0; -} - -int btrfs_free_reloc_root(struct btrfs_trans_handle *trans, - struct btrfs_root *root) -{ - struct btrfs_root *reloc_root; - int ret; - - if (root->reloc_root) { - reloc_root = root->reloc_root; - root->reloc_root = NULL; - list_add(&reloc_root->dead_list, - &root->fs_info->dead_reloc_roots); - - btrfs_set_root_bytenr(&reloc_root->root_item, - reloc_root->node->start); - btrfs_set_root_level(&root->root_item, - btrfs_header_level(reloc_root->node)); - memset(&reloc_root->root_item.drop_progress, 0, - sizeof(struct btrfs_disk_key)); - reloc_root->root_item.drop_level = 0; - - ret = btrfs_update_root(trans, root->fs_info->tree_root, - &reloc_root->root_key, - &reloc_root->root_item); - BUG_ON(ret); - } - return 0; -} - -int btrfs_drop_dead_reloc_roots(struct btrfs_root *root) -{ - struct btrfs_trans_handle *trans; - struct btrfs_root *reloc_root; - struct btrfs_root *prev_root = NULL; - struct list_head dead_roots; - int ret; - unsigned long nr; - - INIT_LIST_HEAD(&dead_roots); - list_splice_init(&root->fs_info->dead_reloc_roots, &dead_roots); - - while (!list_empty(&dead_roots)) { - reloc_root = list_entry(dead_roots.prev, - struct btrfs_root, dead_list); - list_del_init(&reloc_root->dead_list); - - BUG_ON(reloc_root->commit_root != NULL); - while (1) { - trans = btrfs_join_transaction(root, 1); - BUG_ON(IS_ERR(trans)); - - mutex_lock(&root->fs_info->drop_mutex); - ret = btrfs_drop_snapshot(trans, reloc_root); - if (ret != -EAGAIN) - break; - mutex_unlock(&root->fs_info->drop_mutex); - - nr = trans->blocks_used; - ret = btrfs_end_transaction(trans, root); - BUG_ON(ret); - btrfs_btree_balance_dirty(root, nr); - } - - free_extent_buffer(reloc_root->node); - - ret = btrfs_del_root(trans, root->fs_info->tree_root, - &reloc_root->root_key); - BUG_ON(ret); - mutex_unlock(&root->fs_info->drop_mutex); - - nr = trans->blocks_used; - ret = btrfs_end_transaction(trans, root); - BUG_ON(ret); - btrfs_btree_balance_dirty(root, nr); - - kfree(prev_root); - prev_root = reloc_root; - } - if (prev_root) { - btrfs_remove_leaf_refs(prev_root, (u64)-1, 0); - kfree(prev_root); - } - return 0; -} - -int btrfs_add_dead_reloc_root(struct btrfs_root *root) -{ - list_add(&root->dead_list, &root->fs_info->dead_reloc_roots); - return 0; -} - -int btrfs_cleanup_reloc_trees(struct btrfs_root *root) -{ - struct btrfs_root *reloc_root; - struct btrfs_trans_handle *trans; - struct btrfs_key location; - int found; - int ret; - - mutex_lock(&root->fs_info->tree_reloc_mutex); - ret = btrfs_find_dead_roots(root, BTRFS_TREE_RELOC_OBJECTID, NULL); - BUG_ON(ret); - found = !list_empty(&root->fs_info->dead_reloc_roots); - mutex_unlock(&root->fs_info->tree_reloc_mutex); - - if (found) { - trans = btrfs_start_transaction(root, 1); - BUG_ON(IS_ERR(trans)); - ret = btrfs_commit_transaction(trans, root); - BUG_ON(ret); - } - - location.objectid = BTRFS_DATA_RELOC_TREE_OBJECTID; - location.offset = (u64)-1; - location.type = BTRFS_ROOT_ITEM_KEY; - - reloc_root = btrfs_read_fs_root_no_name(root->fs_info, &location); - BUG_ON(!reloc_root); - ret = btrfs_orphan_cleanup(reloc_root); - BUG_ON(ret); - return 0; -} - -static noinline int init_reloc_tree(struct btrfs_trans_handle *trans, - struct btrfs_root *root) -{ - struct btrfs_root *reloc_root; - struct extent_buffer *eb; - struct btrfs_root_item *root_item; - struct btrfs_key root_key; - int ret; - - BUG_ON(!root->ref_cows); - if (root->reloc_root) - return 0; - - root_item = kmalloc(sizeof(*root_item), GFP_NOFS); - if (!root_item) - return -ENOMEM; - - ret = btrfs_copy_root(trans, root, root->commit_root, - &eb, BTRFS_TREE_RELOC_OBJECTID); - BUG_ON(ret); - - root_key.objectid = BTRFS_TREE_RELOC_OBJECTID; - root_key.offset = root->root_key.objectid; - root_key.type = BTRFS_ROOT_ITEM_KEY; - - memcpy(root_item, &root->root_item, sizeof(root_item)); - btrfs_set_root_refs(root_item, 0); - btrfs_set_root_bytenr(root_item, eb->start); - btrfs_set_root_level(root_item, btrfs_header_level(eb)); - btrfs_set_root_generation(root_item, trans->transid); - - btrfs_tree_unlock(eb); - free_extent_buffer(eb); - - ret = btrfs_insert_root(trans, root->fs_info->tree_root, - &root_key, root_item); - BUG_ON(ret); - kfree(root_item); - - reloc_root = btrfs_read_fs_root_no_radix(root->fs_info->tree_root, - &root_key); - BUG_ON(IS_ERR(reloc_root)); - reloc_root->last_trans = trans->transid; - reloc_root->commit_root = NULL; - reloc_root->ref_tree = &root->fs_info->reloc_ref_tree; - - root->reloc_root = reloc_root; - return 0; -} - -/* - * Core function of space balance. - * - * The idea is using reloc trees to relocate tree blocks in reference - * counted roots. There is one reloc tree for each subvol, and all - * reloc trees share same root key objectid. Reloc trees are snapshots - * of the latest committed roots of subvols (root->commit_root). - * - * To relocate a tree block referenced by a subvol, there are two steps. - * COW the block through subvol's reloc tree, then update block pointer - * in the subvol to point to the new block. Since all reloc trees share - * same root key objectid, doing special handing for tree blocks owned - * by them is easy. Once a tree block has been COWed in one reloc tree, - * we can use the resulting new block directly when the same block is - * required to COW again through other reloc trees. By this way, relocated - * tree blocks are shared between reloc trees, so they are also shared - * between subvols. - */ -static noinline int relocate_one_path(struct btrfs_trans_handle *trans, - struct btrfs_root *root, - struct btrfs_path *path, - struct btrfs_key *first_key, - struct btrfs_ref_path *ref_path, - struct btrfs_block_group_cache *group, - struct inode *reloc_inode) -{ - struct btrfs_root *reloc_root; - struct extent_buffer *eb = NULL; - struct btrfs_key *keys; - u64 *nodes; - int level; - int shared_level; - int lowest_level = 0; - int ret; - - if (ref_path->owner_objectid < BTRFS_FIRST_FREE_OBJECTID) - lowest_level = ref_path->owner_objectid; - - if (!root->ref_cows) { - path->lowest_level = lowest_level; - ret = btrfs_search_slot(trans, root, first_key, path, 0, 1); - BUG_ON(ret < 0); - path->lowest_level = 0; - btrfs_release_path(root, path); - return 0; - } - - mutex_lock(&root->fs_info->tree_reloc_mutex); - ret = init_reloc_tree(trans, root); - BUG_ON(ret); - reloc_root = root->reloc_root; - - shared_level = ref_path->shared_level; - ref_path->shared_level = BTRFS_MAX_LEVEL - 1; - - keys = ref_path->node_keys; - nodes = ref_path->new_nodes; - memset(&keys[shared_level + 1], 0, - sizeof(*keys) * (BTRFS_MAX_LEVEL - shared_level - 1)); - memset(&nodes[shared_level + 1], 0, - sizeof(*nodes) * (BTRFS_MAX_LEVEL - shared_level - 1)); - - if (nodes[lowest_level] == 0) { - path->lowest_level = lowest_level; - ret = btrfs_search_slot(trans, reloc_root, first_key, path, - 0, 1); - BUG_ON(ret); - for (level = lowest_level; level < BTRFS_MAX_LEVEL; level++) { - eb = path->nodes[level]; - if (!eb || eb == reloc_root->node) - break; - nodes[level] = eb->start; - if (level == 0) - btrfs_item_key_to_cpu(eb, &keys[level], 0); - else - btrfs_node_key_to_cpu(eb, &keys[level], 0); - } - if (nodes[0] && - ref_path->owner_objectid >= BTRFS_FIRST_FREE_OBJECTID) { - eb = path->nodes[0]; - ret = replace_extents_in_leaf(trans, reloc_root, eb, - group, reloc_inode); - BUG_ON(ret); - } - btrfs_release_path(reloc_root, path); - } else { - ret = btrfs_merge_path(trans, reloc_root, keys, nodes, - lowest_level); - BUG_ON(ret); - } - - /* - * replace tree blocks in the fs tree with tree blocks in - * the reloc tree. - */ - ret = btrfs_merge_path(trans, root, keys, nodes, lowest_level); - BUG_ON(ret < 0); - - if (ref_path->owner_objectid >= BTRFS_FIRST_FREE_OBJECTID) { - ret = btrfs_search_slot(trans, reloc_root, first_key, path, - 0, 0); - BUG_ON(ret); - extent_buffer_get(path->nodes[0]); - eb = path->nodes[0]; - btrfs_release_path(reloc_root, path); - ret = invalidate_extent_cache(reloc_root, eb, group, root); - BUG_ON(ret); - free_extent_buffer(eb); - } - - mutex_unlock(&root->fs_info->tree_reloc_mutex); - path->lowest_level = 0; - return 0; -} - -static noinline int relocate_tree_block(struct btrfs_trans_handle *trans, - struct btrfs_root *root, - struct btrfs_path *path, - struct btrfs_key *first_key, - struct btrfs_ref_path *ref_path) -{ - int ret; - - ret = relocate_one_path(trans, root, path, first_key, - ref_path, NULL, NULL); - BUG_ON(ret); - - return 0; -} - -static noinline int del_extent_zero(struct btrfs_trans_handle *trans, - struct btrfs_root *extent_root, - struct btrfs_path *path, - struct btrfs_key *extent_key) -{ - int ret; - - ret = btrfs_search_slot(trans, extent_root, extent_key, path, -1, 1); - if (ret) - goto out; - ret = btrfs_del_item(trans, extent_root, path); -out: - btrfs_release_path(extent_root, path); - return ret; -} - -static noinline struct btrfs_root *read_ref_root(struct btrfs_fs_info *fs_info, - struct btrfs_ref_path *ref_path) -{ - struct btrfs_key root_key; - - root_key.objectid = ref_path->root_objectid; - root_key.type = BTRFS_ROOT_ITEM_KEY; - if (is_cowonly_root(ref_path->root_objectid)) - root_key.offset = 0; - else - root_key.offset = (u64)-1; - - return btrfs_read_fs_root_no_name(fs_info, &root_key); -} - -static noinline int relocate_one_extent(struct btrfs_root *extent_root, - struct btrfs_path *path, - struct btrfs_key *extent_key, - struct btrfs_block_group_cache *group, - struct inode *reloc_inode, int pass) -{ - struct btrfs_trans_handle *trans; - struct btrfs_root *found_root; - struct btrfs_ref_path *ref_path = NULL; - struct disk_extent *new_extents = NULL; - int nr_extents = 0; - int loops; - int ret; - int level; - struct btrfs_key first_key; - u64 prev_block = 0; - - - trans = btrfs_start_transaction(extent_root, 1); - BUG_ON(IS_ERR(trans)); - - if (extent_key->objectid == 0) { - ret = del_extent_zero(trans, extent_root, path, extent_key); - goto out; - } - - ref_path = kmalloc(sizeof(*ref_path), GFP_NOFS); - if (!ref_path) { - ret = -ENOMEM; - goto out; - } - - for (loops = 0; ; loops++) { - if (loops == 0) { - ret = btrfs_first_ref_path(trans, extent_root, ref_path, - extent_key->objectid); - } else { - ret = btrfs_next_ref_path(trans, extent_root, ref_path); - } - if (ret < 0) - goto out; - if (ret > 0) - break; - - if (ref_path->root_objectid == BTRFS_TREE_LOG_OBJECTID || - ref_path->root_objectid == BTRFS_TREE_RELOC_OBJECTID) - continue; - - found_root = read_ref_root(extent_root->fs_info, ref_path); - BUG_ON(!found_root); - /* - * for reference counted tree, only process reference paths - * rooted at the latest committed root. - */ - if (found_root->ref_cows && - ref_path->root_generation != found_root->root_key.offset) - continue; - - if (ref_path->owner_objectid >= BTRFS_FIRST_FREE_OBJECTID) { - if (pass == 0) { - /* - * copy data extents to new locations - */ - u64 group_start = group->key.objectid; - ret = relocate_data_extent(reloc_inode, - extent_key, - group_start); - if (ret < 0) - goto out; - break; - } - level = 0; - } else { - level = ref_path->owner_objectid; - } - - if (prev_block != ref_path->nodes[level]) { - struct extent_buffer *eb; - u64 block_start = ref_path->nodes[level]; - u64 block_size = btrfs_level_size(found_root, level); - - eb = read_tree_block(found_root, block_start, - block_size, 0); - if (!eb) { - ret = -EIO; - goto out; - } - btrfs_tree_lock(eb); - BUG_ON(level != btrfs_header_level(eb)); - - if (level == 0) - btrfs_item_key_to_cpu(eb, &first_key, 0); - else - btrfs_node_key_to_cpu(eb, &first_key, 0); - - btrfs_tree_unlock(eb); - free_extent_buffer(eb); - prev_block = block_start; - } - - mutex_lock(&extent_root->fs_info->trans_mutex); - btrfs_record_root_in_trans(found_root); - mutex_unlock(&extent_root->fs_info->trans_mutex); - if (ref_path->owner_objectid >= BTRFS_FIRST_FREE_OBJECTID) { - /* - * try to update data extent references while - * keeping metadata shared between snapshots. - */ - if (pass == 1) { - ret = relocate_one_path(trans, found_root, - path, &first_key, ref_path, - group, reloc_inode); - if (ret < 0) - goto out; - continue; - } - /* - * use fallback method to process the remaining - * references. - */ - if (!new_extents) { - u64 group_start = group->key.objectid; - new_extents = kmalloc(sizeof(*new_extents), - GFP_NOFS); - if (!new_extents) { - ret = -ENOMEM; - goto out; - } - nr_extents = 1; - ret = get_new_locations(reloc_inode, - extent_key, - group_start, 1, - &new_extents, - &nr_extents); - if (ret) - goto out; - } - ret = replace_one_extent(trans, found_root, - path, extent_key, - &first_key, ref_path, - new_extents, nr_extents); - } else { - ret = relocate_tree_block(trans, found_root, path, - &first_key, ref_path); - } - if (ret < 0) - goto out; - } - ret = 0; -out: - btrfs_end_transaction(trans, extent_root); - kfree(new_extents); - kfree(ref_path); - return ret; -} -#endif - static u64 update_block_group_flags(struct btrfs_root *root, u64 flags) { u64 num_devices; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 57122a5e8473..5ff52b644a60 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3093,178 +3093,6 @@ out: return err; } -#if 0 -/* - * when truncating bytes in a file, it is possible to avoid reading - * the leaves that contain only checksum items. This can be the - * majority of the IO required to delete a large file, but it must - * be done carefully. - * - * The keys in the level just above the leaves are checked to make sure - * the lowest key in a given leaf is a csum key, and starts at an offset - * after the new size. - * - * Then the key for the next leaf is checked to make sure it also has - * a checksum item for the same file. If it does, we know our target leaf - * contains only checksum items, and it can be safely freed without reading - * it. - * - * This is just an optimization targeted at large files. It may do - * nothing. It will return 0 unless things went badly. - */ -static noinline int drop_csum_leaves(struct btrfs_trans_handle *trans, - struct btrfs_root *root, - struct btrfs_path *path, - struct inode *inode, u64 new_size) -{ - struct btrfs_key key; - int ret; - int nritems; - struct btrfs_key found_key; - struct btrfs_key other_key; - struct btrfs_leaf_ref *ref; - u64 leaf_gen; - u64 leaf_start; - - path->lowest_level = 1; - key.objectid = inode->i_ino; - key.type = BTRFS_CSUM_ITEM_KEY; - key.offset = new_size; -again: - ret = btrfs_search_slot(trans, root, &key, path, -1, 1); - if (ret < 0) - goto out; - - if (path->nodes[1] == NULL) { - ret = 0; - goto out; - } - ret = 0; - btrfs_node_key_to_cpu(path->nodes[1], &found_key, path->slots[1]); - nritems = btrfs_header_nritems(path->nodes[1]); - - if (!nritems) - goto out; - - if (path->slots[1] >= nritems) - goto next_node; - - /* did we find a key greater than anything we want to delete? */ - if (found_key.objectid > inode->i_ino || - (found_key.objectid == inode->i_ino && found_key.type > key.type)) - goto out; - - /* we check the next key in the node to make sure the leave contains - * only checksum items. This comparison doesn't work if our - * leaf is the last one in the node - */ - if (path->slots[1] + 1 >= nritems) { -next_node: - /* search forward from the last key in the node, this - * will bring us into the next node in the tree - */ - btrfs_node_key_to_cpu(path->nodes[1], &found_key, nritems - 1); - - /* unlikely, but we inc below, so check to be safe */ - if (found_key.offset == (u64)-1) - goto out; - - /* search_forward needs a path with locks held, do the - * search again for the original key. It is possible - * this will race with a balance and return a path that - * we could modify, but this drop is just an optimization - * and is allowed to miss some leaves. - */ - btrfs_release_path(root, path); - found_key.offset++; - - /* setup a max key for search_forward */ - other_key.offset = (u64)-1; - other_key.type = key.type; - other_key.objectid = key.objectid; - - path->keep_locks = 1; - ret = btrfs_search_forward(root, &found_key, &other_key, - path, 0, 0); - path->keep_locks = 0; - if (ret || found_key.objectid != key.objectid || - found_key.type != key.type) { - ret = 0; - goto out; - } - - key.offset = found_key.offset; - btrfs_release_path(root, path); - cond_resched(); - goto again; - } - - /* we know there's one more slot after us in the tree, - * read that key so we can verify it is also a checksum item - */ - btrfs_node_key_to_cpu(path->nodes[1], &other_key, path->slots[1] + 1); - - if (found_key.objectid < inode->i_ino) - goto next_key; - - if (found_key.type != key.type || found_key.offset < new_size) - goto next_key; - - /* - * if the key for the next leaf isn't a csum key from this objectid, - * we can't be sure there aren't good items inside this leaf. - * Bail out - */ - if (other_key.objectid != inode->i_ino || other_key.type != key.type) - goto out; - - leaf_start = btrfs_node_blockptr(path->nodes[1], path->slots[1]); - leaf_gen = btrfs_node_ptr_generation(path->nodes[1], path->slots[1]); - /* - * it is safe to delete this leaf, it contains only - * csum items from this inode at an offset >= new_size - */ - ret = btrfs_del_leaf(trans, root, path, leaf_start); - BUG_ON(ret); - - if (root->ref_cows && leaf_gen < trans->transid) { - ref = btrfs_alloc_leaf_ref(root, 0); - if (ref) { - ref->root_gen = root->root_key.offset; - ref->bytenr = leaf_start; - ref->owner = 0; - ref->generation = leaf_gen; - ref->nritems = 0; - - btrfs_sort_leaf_ref(ref); - - ret = btrfs_add_leaf_ref(root, ref, 0); - WARN_ON(ret); - btrfs_free_leaf_ref(root, ref); - } else { - WARN_ON(1); - } - } -next_key: - btrfs_release_path(root, path); - - if (other_key.objectid == inode->i_ino && - other_key.type == key.type && other_key.offset > key.offset) { - key.offset = other_key.offset; - cond_resched(); - goto again; - } - ret = 0; -out: - /* fixup any changes we've made to the path */ - path->lowest_level = 0; - path->keep_locks = 0; - btrfs_release_path(root, path); - return ret; -} - -#endif - /* * this can truncate away extent items, csum items and directory items. * It starts at a high offset and removes keys until it can't find diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 955f76eb0fa8..211aceeb9ea0 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -346,49 +346,6 @@ out_unlock: return ret; } -#if 0 -/* - * rate limit against the drop_snapshot code. This helps to slow down new - * operations if the drop_snapshot code isn't able to keep up. - */ -static void throttle_on_drops(struct btrfs_root *root) -{ - struct btrfs_fs_info *info = root->fs_info; - int harder_count = 0; - -harder: - if (atomic_read(&info->throttles)) { - DEFINE_WAIT(wait); - int thr; - thr = atomic_read(&info->throttle_gen); - - do { - prepare_to_wait(&info->transaction_throttle, - &wait, TASK_UNINTERRUPTIBLE); - if (!atomic_read(&info->throttles)) { - finish_wait(&info->transaction_throttle, &wait); - break; - } - schedule(); - finish_wait(&info->transaction_throttle, &wait); - } while (thr == atomic_read(&info->throttle_gen)); - harder_count++; - - if (root->fs_info->total_ref_cache_size > 1 * 1024 * 1024 && - harder_count < 2) - goto harder; - - if (root->fs_info->total_ref_cache_size > 5 * 1024 * 1024 && - harder_count < 10) - goto harder; - - if (root->fs_info->total_ref_cache_size > 10 * 1024 * 1024 && - harder_count < 20) - goto harder; - } -} -#endif - void btrfs_throttle(struct btrfs_root *root) { mutex_lock(&root->fs_info->trans_mutex); @@ -808,97 +765,6 @@ int btrfs_defrag_root(struct btrfs_root *root, int cacheonly) return ret; } -#if 0 -/* - * when dropping snapshots, we generate a ton of delayed refs, and it makes - * sense not to join the transaction while it is trying to flush the current - * queue of delayed refs out. - * - * This is used by the drop snapshot code only - */ -static noinline int wait_transaction_pre_flush(struct btrfs_fs_info *info) -{ - DEFINE_WAIT(wait); - - mutex_lock(&info->trans_mutex); - while (info->running_transaction && - info->running_transaction->delayed_refs.flushing) { - prepare_to_wait(&info->transaction_wait, &wait, - TASK_UNINTERRUPTIBLE); - mutex_unlock(&info->trans_mutex); - - schedule(); - - mutex_lock(&info->trans_mutex); - finish_wait(&info->transaction_wait, &wait); - } - mutex_unlock(&info->trans_mutex); - return 0; -} - -/* - * Given a list of roots that need to be deleted, call btrfs_drop_snapshot on - * all of them - */ -int btrfs_drop_dead_root(struct btrfs_root *root) -{ - struct btrfs_trans_handle *trans; - struct btrfs_root *tree_root = root->fs_info->tree_root; - unsigned long nr; - int ret; - - while (1) { - /* - * we don't want to jump in and create a bunch of - * delayed refs if the transaction is starting to close - */ - wait_transaction_pre_flush(tree_root->fs_info); - trans = btrfs_start_transaction(tree_root, 1); - - /* - * we've joined a transaction, make sure it isn't - * closing right now - */ - if (trans->transaction->delayed_refs.flushing) { - btrfs_end_transaction(trans, tree_root); - continue; - } - - ret = btrfs_drop_snapshot(trans, root); - if (ret != -EAGAIN) - break; - - ret = btrfs_update_root(trans, tree_root, - &root->root_key, - &root->root_item); - if (ret) - break; - - nr = trans->blocks_used; - ret = btrfs_end_transaction(trans, tree_root); - BUG_ON(ret); - - btrfs_btree_balance_dirty(tree_root, nr); - cond_resched(); - } - BUG_ON(ret); - - ret = btrfs_del_root(trans, tree_root, &root->root_key); - BUG_ON(ret); - - nr = trans->blocks_used; - ret = btrfs_end_transaction(trans, tree_root); - BUG_ON(ret); - - free_extent_buffer(root->node); - free_extent_buffer(root->commit_root); - kfree(root); - - btrfs_btree_balance_dirty(tree_root, nr); - return ret; -} -#endif - /* * new snapshots need to be created at a very specific time in the * transaction commit. This does the actual creation -- cgit v1.2.3 From 711b9cea92554be6bd44f04f2485582d762fc441 Mon Sep 17 00:00:00 2001 From: Philippe Langlais Date: Sat, 7 May 2011 17:09:43 +0200 Subject: dmaengine/ste_dma40: fix introduced warnings The compiler nowadays moans about possibly non-assigned variable. Fix this by default-assigning 0. Signed-off-by: Philippe Langlais Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index af955de035f4..65d2535d12ef 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -1829,7 +1829,7 @@ d40_get_dev_addr(struct d40_chan *chan, enum dma_data_direction direction) { struct stedma40_platform_data *plat = chan->base->plat_data; struct stedma40_chan_cfg *cfg = &chan->dma_cfg; - dma_addr_t addr; + dma_addr_t addr = 0; if (chan->runtime_addr) return chan->runtime_addr; -- cgit v1.2.3 From 543aabc7d295bfe2489f184259395e3467520d48 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 6 May 2011 19:56:51 +0200 Subject: dmaengine: at_hdmac: set residue as total len in atc_tx_status If transfer status is !=DMA_SUCCESS, return total transfer len as residue, instead of zero. Idea from dw_dmac patch by Viresh Kumar. Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index f52c9e38d889..ba0b5ec4e4c2 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -1026,7 +1026,12 @@ atc_tx_status(struct dma_chan *chan, spin_unlock_bh(&atchan->lock); - dma_set_tx_state(txstate, last_complete, last_used, 0); + if (ret != DMA_SUCCESS) + dma_set_tx_state(txstate, last_complete, last_used, + atc_first_active(atchan)->len); + else + dma_set_tx_state(txstate, last_complete, last_used, 0); + dev_vdbg(chan2dev(chan), "tx_status: %d (d%d, u%d)\n", cookie, last_complete ? last_complete : 0, last_used ? last_used : 0); -- cgit v1.2.3 From 23b5e3ad68a3c26a6a36039ea907997664aedcab Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 6 May 2011 19:56:52 +0200 Subject: dmaengine: at_hdmac: implement pause and resume in atc_control Pause and resume controls are useful for audio devices. This also returns correct status from atc_tx_status() in case chan is paused. Idea from dw_dmac patch by Linus Walleij. Signed-off-by: Nicolas Ferre Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 97 ++++++++++++++++++++++++++++++++------------- drivers/dma/at_hdmac_regs.h | 1 + 2 files changed, 71 insertions(+), 27 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index ba0b5ec4e4c2..5968245e1e6a 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -508,7 +508,8 @@ static irqreturn_t at_dma_interrupt(int irq, void *dev_id) if (pending & (AT_DMA_BTC(i) | AT_DMA_ERR(i))) { if (pending & AT_DMA_ERR(i)) { /* Disable channel on AHB error */ - dma_writel(atdma, CHDR, atchan->mask); + dma_writel(atdma, CHDR, + AT_DMA_RES(i) | atchan->mask); /* Give information to tasklet */ set_bit(ATC_IS_ERROR, &atchan->status); } @@ -952,39 +953,78 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, { struct at_dma_chan *atchan = to_at_dma_chan(chan); struct at_dma *atdma = to_at_dma(chan->device); - struct at_desc *desc, *_desc; + int chan_id = atchan->chan_common.chan_id; + LIST_HEAD(list); - /* Only supports DMA_TERMINATE_ALL */ - if (cmd != DMA_TERMINATE_ALL) - return -ENXIO; + dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd); - /* - * This is only called when something went wrong elsewhere, so - * we don't really care about the data. Just disable the - * channel. We still have to poll the channel enable bit due - * to AHB/HSB limitations. - */ - spin_lock_bh(&atchan->lock); + if (cmd == DMA_PAUSE) { + int pause_timeout = 1000; - dma_writel(atdma, CHDR, atchan->mask); + spin_lock_bh(&atchan->lock); - /* confirm that this channel is disabled */ - while (dma_readl(atdma, CHSR) & atchan->mask) - cpu_relax(); + dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id)); + + /* wait for FIFO to be empty */ + while (!(dma_readl(atdma, CHSR) & AT_DMA_EMPT(chan_id))) { + if (pause_timeout-- > 0) { + /* the FIFO can only drain if the peripheral + * is still requesting data: + * -> timeout if it is not the case. */ + dma_writel(atdma, CHDR, AT_DMA_RES(chan_id)); + spin_unlock_bh(&atchan->lock); + return -ETIMEDOUT; + } + cpu_relax(); + } - /* active_list entries will end up before queued entries */ - list_splice_init(&atchan->queue, &list); - list_splice_init(&atchan->active_list, &list); + set_bit(ATC_IS_PAUSED, &atchan->status); - /* Flush all pending and queued descriptors */ - list_for_each_entry_safe(desc, _desc, &list, desc_node) - atc_chain_complete(atchan, desc); + spin_unlock_bh(&atchan->lock); + } else if (cmd == DMA_RESUME) { + if (!test_bit(ATC_IS_PAUSED, &atchan->status)) + return 0; - /* if channel dedicated to cyclic operations, free it */ - clear_bit(ATC_IS_CYCLIC, &atchan->status); + spin_lock_bh(&atchan->lock); - spin_unlock_bh(&atchan->lock); + dma_writel(atdma, CHDR, AT_DMA_RES(chan_id)); + clear_bit(ATC_IS_PAUSED, &atchan->status); + + spin_unlock_bh(&atchan->lock); + } else if (cmd == DMA_TERMINATE_ALL) { + struct at_desc *desc, *_desc; + /* + * This is only called when something went wrong elsewhere, so + * we don't really care about the data. Just disable the + * channel. We still have to poll the channel enable bit due + * to AHB/HSB limitations. + */ + spin_lock_bh(&atchan->lock); + + /* disabling channel: must also remove suspend state */ + dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask); + + /* confirm that this channel is disabled */ + while (dma_readl(atdma, CHSR) & atchan->mask) + cpu_relax(); + + /* active_list entries will end up before queued entries */ + list_splice_init(&atchan->queue, &list); + list_splice_init(&atchan->active_list, &list); + + /* Flush all pending and queued descriptors */ + list_for_each_entry_safe(desc, _desc, &list, desc_node) + atc_chain_complete(atchan, desc); + + clear_bit(ATC_IS_PAUSED, &atchan->status); + /* if channel dedicated to cyclic operations, free it */ + clear_bit(ATC_IS_CYCLIC, &atchan->status); + + spin_unlock_bh(&atchan->lock); + } else { + return -ENXIO; + } return 0; } @@ -1032,8 +1072,11 @@ atc_tx_status(struct dma_chan *chan, else dma_set_tx_state(txstate, last_complete, last_used, 0); - dev_vdbg(chan2dev(chan), "tx_status: %d (d%d, u%d)\n", - cookie, last_complete ? last_complete : 0, + if (test_bit(ATC_IS_PAUSED, &atchan->status)) + ret = DMA_PAUSED; + + dev_vdbg(chan2dev(chan), "tx_status %d: cookie = %d (d%d, u%d)\n", + ret, cookie, last_complete ? last_complete : 0, last_used ? last_used : 0); return ret; diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index ae3056df4f4b..087dbf1dd39c 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -191,6 +191,7 @@ txd_to_at_desc(struct dma_async_tx_descriptor *txd) */ enum atc_status { ATC_IS_ERROR = 0, + ATC_IS_PAUSED = 1, ATC_IS_CYCLIC = 24, }; -- cgit v1.2.3 From e257e1563f28890f54b5f82861373bb4b32dd770 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 6 May 2011 19:56:53 +0200 Subject: dmaengine: at_hdmac: use descriptor chaining help function A little function helps to chain descriptors: it is already used in cyclic dma operations, now use it in memcpy and slave_sg preparation functions. Signed-off-by: Nicolas Ferre Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 33 +++------------------------------ 1 file changed, 3 insertions(+), 30 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 5968245e1e6a..2c6bc3aa3dd0 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -626,16 +626,7 @@ atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src, desc->txd.cookie = 0; - if (!first) { - first = desc; - } else { - /* inform the HW lli about chaining */ - prev->lli.dscr = desc->txd.phys; - /* insert the link descriptor to the LD ring */ - list_add_tail(&desc->desc_node, - &first->tx_list); - } - prev = desc; + atc_desc_chain(&first, &prev, desc); } /* First descriptor of the chain embedds additional information */ @@ -726,16 +717,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, | len >> mem_width; desc->lli.ctrlb = ctrlb; - if (!first) { - first = desc; - } else { - /* inform the HW lli about chaining */ - prev->lli.dscr = desc->txd.phys; - /* insert the link descriptor to the LD ring */ - list_add_tail(&desc->desc_node, - &first->tx_list); - } - prev = desc; + atc_desc_chain(&first, &prev, desc); total_len += len; } break; @@ -769,16 +751,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, | len >> reg_width; desc->lli.ctrlb = ctrlb; - if (!first) { - first = desc; - } else { - /* inform the HW lli about chaining */ - prev->lli.dscr = desc->txd.phys; - /* insert the link descriptor to the LD ring */ - list_add_tail(&desc->desc_node, - &first->tx_list); - } - prev = desc; + atc_desc_chain(&first, &prev, desc); total_len += len; } break; -- cgit v1.2.3 From c8fcba600c46c5d7667ec230b1d9ce3ce5859f9c Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 9 May 2011 16:09:35 +0900 Subject: pch_dma: fix dma direction issue for ML7213 IOH video-in Currently, even-channel number is set as tx direction and odd is set as rx. However, though video-in uses ch6, the direction is not tx but rx. This patch sets video-in's DMA direction correctly. Signed-off-by: Tomoya MORINAGA Signed-off-by: Vinod Koul --- drivers/dma/pch_dma.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index 6eebc6205c65..d28c47a42f14 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -478,7 +478,6 @@ static int pd_alloc_chan_resources(struct dma_chan *chan) spin_unlock_bh(&pd_chan->lock); pdc_enable_irq(chan, 1); - pdc_set_dir(chan); return pd_chan->descs_allocated; } @@ -561,6 +560,9 @@ static struct dma_async_tx_descriptor *pd_prep_slave_sg(struct dma_chan *chan, else return NULL; + pd_chan->dir = direction; + pdc_set_dir(chan); + for_each_sg(sgl, sg, sg_len, i) { desc = pdc_desc_get(pd_chan); @@ -850,8 +852,6 @@ static int __devinit pch_dma_probe(struct pci_dev *pdev, pd_chan->membase = ®s->desc[i]; - pd_chan->dir = (i % 2) ? DMA_FROM_DEVICE : DMA_TO_DEVICE; - spin_lock_init(&pd_chan->lock); INIT_LIST_HEAD(&pd_chan->active_list); -- cgit v1.2.3 From 08645fdc7bab4564f7dfd07525da8a1761f8f106 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 9 May 2011 16:09:36 +0900 Subject: pch_dma: modify for checkpatch Fix checkpatch warnings. Signed-off-by: Tomoya MORINAGA Signed-off-by: Vinod Koul --- drivers/dma/pch_dma.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index d28c47a42f14..afd6fba08a6f 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -138,7 +138,8 @@ struct pch_dma { #define dma_writel(pd, name, val) \ writel((val), (pd)->membase + PCH_DMA_##name) -static inline struct pch_dma_desc *to_pd_desc(struct dma_async_tx_descriptor *txd) +static inline +struct pch_dma_desc *to_pd_desc(struct dma_async_tx_descriptor *txd) { return container_of(txd, struct pch_dma_desc, txd); } @@ -163,13 +164,15 @@ static inline struct device *chan2parent(struct dma_chan *chan) return chan->dev->device.parent; } -static inline struct pch_dma_desc *pdc_first_active(struct pch_dma_chan *pd_chan) +static inline +struct pch_dma_desc *pdc_first_active(struct pch_dma_chan *pd_chan) { return list_first_entry(&pd_chan->active_list, struct pch_dma_desc, desc_node); } -static inline struct pch_dma_desc *pdc_first_queued(struct pch_dma_chan *pd_chan) +static inline +struct pch_dma_desc *pdc_first_queued(struct pch_dma_chan *pd_chan) { return list_first_entry(&pd_chan->queue, struct pch_dma_desc, desc_node); -- cgit v1.2.3 From 60092d0bde4c8741198da4a69b693d3709385bf1 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 9 May 2011 16:09:37 +0900 Subject: pch_dma: Fix DMA setting issue Currently, Direct-Start mode(*) is enabled. Our IOH's devices must not use this mode. This causes unexpected behavior. This patch deletes Direct-Start setting. (*) This mode is used in order for CPU to generate the DMA request. Signed-off-by: Tomoya MORINAGA Signed-off-by: Vinod Koul --- drivers/dma/pch_dma.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index afd6fba08a6f..4e4667204061 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -254,9 +254,6 @@ static bool pdc_is_idle(struct pch_dma_chan *pd_chan) static void pdc_dostart(struct pch_dma_chan *pd_chan, struct pch_dma_desc* desc) { - struct pch_dma *pd = to_pd(pd_chan->chan.device); - u32 val; - if (!pdc_is_idle(pd_chan)) { dev_err(chan2dev(&pd_chan->chan), "BUG: Attempt to start non-idle channel\n"); @@ -282,10 +279,6 @@ static void pdc_dostart(struct pch_dma_chan *pd_chan, struct pch_dma_desc* desc) channel_writel(pd_chan, NEXT, desc->txd.phys); pdc_set_mode(&pd_chan->chan, DMA_CTL0_SG); } - - val = dma_readl(pd, CTL2); - val |= 1 << (DMA_CTL2_START_SHIFT_BITS + pd_chan->chan.chan_id); - dma_writel(pd, CTL2, val); } static void pdc_chain_complete(struct pch_dma_chan *pd_chan, -- cgit v1.2.3 From 194f5f2706c7472f9c6bb2d17fa788993606581f Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 9 May 2011 16:09:38 +0900 Subject: pch_dma: Support I2S for ML7213 IOH Support I2S device for ML7213 IOH Signed-off-by: Tomoya MORINAGA Signed-off-by: Vinod Koul --- drivers/dma/pch_dma.c | 62 ++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 47 insertions(+), 15 deletions(-) diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index 4e4667204061..2edcc9c10297 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -77,10 +77,10 @@ struct pch_dma_regs { u32 dma_ctl0; u32 dma_ctl1; u32 dma_ctl2; - u32 reserved1; + u32 dma_ctl3; u32 dma_sts0; u32 dma_sts1; - u32 reserved2; + u32 dma_sts2; u32 reserved3; struct pch_dma_desc_regs desc[MAX_CHAN_NR]; }; @@ -130,6 +130,7 @@ struct pch_dma { #define PCH_DMA_CTL0 0x00 #define PCH_DMA_CTL1 0x04 #define PCH_DMA_CTL2 0x08 +#define PCH_DMA_CTL3 0x0C #define PCH_DMA_STS0 0x10 #define PCH_DMA_STS1 0x14 @@ -202,16 +203,30 @@ static void pdc_set_dir(struct dma_chan *chan) struct pch_dma *pd = to_pd(chan->device); u32 val; - val = dma_readl(pd, CTL0); + if (chan->chan_id < 8) { + val = dma_readl(pd, CTL0); - if (pd_chan->dir == DMA_TO_DEVICE) - val |= 0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id + - DMA_CTL0_DIR_SHIFT_BITS); - else - val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id + - DMA_CTL0_DIR_SHIFT_BITS)); + if (pd_chan->dir == DMA_TO_DEVICE) + val |= 0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id + + DMA_CTL0_DIR_SHIFT_BITS); + else + val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * chan->chan_id + + DMA_CTL0_DIR_SHIFT_BITS)); + + dma_writel(pd, CTL0, val); + } else { + int ch = chan->chan_id - 8; /* ch8-->0 ch9-->1 ... ch11->3 */ + val = dma_readl(pd, CTL3); - dma_writel(pd, CTL0, val); + if (pd_chan->dir == DMA_TO_DEVICE) + val |= 0x1 << (DMA_CTL0_BITS_PER_CH * ch + + DMA_CTL0_DIR_SHIFT_BITS); + else + val &= ~(0x1 << (DMA_CTL0_BITS_PER_CH * ch + + DMA_CTL0_DIR_SHIFT_BITS)); + + dma_writel(pd, CTL3, val); + } dev_dbg(chan2dev(chan), "pdc_set_dir: chan %d -> %x\n", chan->chan_id, val); @@ -222,13 +237,26 @@ static void pdc_set_mode(struct dma_chan *chan, u32 mode) struct pch_dma *pd = to_pd(chan->device); u32 val; - val = dma_readl(pd, CTL0); + if (chan->chan_id < 8) { + val = dma_readl(pd, CTL0); - val &= ~(DMA_CTL0_MODE_MASK_BITS << - (DMA_CTL0_BITS_PER_CH * chan->chan_id)); - val |= mode << (DMA_CTL0_BITS_PER_CH * chan->chan_id); + val &= ~(DMA_CTL0_MODE_MASK_BITS << + (DMA_CTL0_BITS_PER_CH * chan->chan_id)); + val |= mode << (DMA_CTL0_BITS_PER_CH * chan->chan_id); - dma_writel(pd, CTL0, val); + dma_writel(pd, CTL0, val); + } else { + int ch = chan->chan_id - 8; /* ch8-->0 ch9-->1 ... ch11->3 */ + + val = dma_readl(pd, CTL3); + + val &= ~(DMA_CTL0_MODE_MASK_BITS << + (DMA_CTL0_BITS_PER_CH * ch)); + val |= mode << (DMA_CTL0_BITS_PER_CH * ch); + + dma_writel(pd, CTL3, val); + + } dev_dbg(chan2dev(chan), "pdc_set_mode: chan %d -> %x\n", chan->chan_id, val); @@ -701,6 +729,7 @@ static void pch_dma_save_regs(struct pch_dma *pd) pd->regs.dma_ctl0 = dma_readl(pd, CTL0); pd->regs.dma_ctl1 = dma_readl(pd, CTL1); pd->regs.dma_ctl2 = dma_readl(pd, CTL2); + pd->regs.dma_ctl3 = dma_readl(pd, CTL3); list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) { pd_chan = to_pd_chan(chan); @@ -723,6 +752,7 @@ static void pch_dma_restore_regs(struct pch_dma *pd) dma_writel(pd, CTL0, pd->regs.dma_ctl0); dma_writel(pd, CTL1, pd->regs.dma_ctl1); dma_writel(pd, CTL2, pd->regs.dma_ctl2); + dma_writel(pd, CTL3, pd->regs.dma_ctl3); list_for_each_entry_safe(chan, _c, &pd->dma.channels, device_node) { pd_chan = to_pd_chan(chan); @@ -925,6 +955,7 @@ static void __devexit pch_dma_remove(struct pci_dev *pdev) #define PCI_DEVICE_ID_ML7213_DMA1_8CH 0x8026 #define PCI_DEVICE_ID_ML7213_DMA2_8CH 0x802B #define PCI_DEVICE_ID_ML7213_DMA3_4CH 0x8034 +#define PCI_DEVICE_ID_ML7213_DMA4_12CH 0x8032 static const struct pci_device_id pch_dma_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 }, @@ -932,6 +963,7 @@ static const struct pci_device_id pch_dma_id_table[] = { { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA1_8CH), 8}, /* UART Video */ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA2_8CH), 8}, /* PCMIF SPI */ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA3_4CH), 4}, /* FPGA */ + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA4_12CH), 12}, /* I2S */ { 0, }, }; -- cgit v1.2.3 From c0dfc04ac96847913a791f5459f4ac83a81a4745 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 9 May 2011 16:09:39 +0900 Subject: pch_dma: Support new device ML7223 IOH Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub). The ML7223 IOH is for MP(Media Phone) use. The ML7223 is companion chip for Intel Atom E6xx series. The ML7223 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA Signed-off-by: Vinod Koul --- drivers/dma/Kconfig | 12 +++++++----- drivers/dma/pch_dma.c | 8 ++++++++ 2 files changed, 15 insertions(+), 5 deletions(-) diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index a572600e44eb..25cf327cd1cb 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -200,16 +200,18 @@ config PL330_DMA platform_data for a dma-pl330 device. config PCH_DMA - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7213 IOH DMA support" + tristate "Intel EG20T PCH / OKI Semi IOH(ML7213/ML7223) DMA support" depends on PCI && X86 select DMA_ENGINE help Enable support for Intel EG20T PCH DMA engine. - This driver also can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/ - Output Hub) which is for IVI(In-Vehicle Infotainment) use. - ML7213 is companion chip for Intel Atom E6xx series. - ML7213 is completely compatible for Intel EG20T PCH. + This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ + Output Hub), ML7213 and ML7223. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is + for MP(Media Phone) use. + ML7213/ML7223 is companion chip for Intel Atom E6xx series. + ML7213/ML7223 is completely compatible for Intel EG20T PCH. config IMX_SDMA tristate "i.MX SDMA support" diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index 2edcc9c10297..083e698da533 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -956,6 +956,10 @@ static void __devexit pch_dma_remove(struct pci_dev *pdev) #define PCI_DEVICE_ID_ML7213_DMA2_8CH 0x802B #define PCI_DEVICE_ID_ML7213_DMA3_4CH 0x8034 #define PCI_DEVICE_ID_ML7213_DMA4_12CH 0x8032 +#define PCI_DEVICE_ID_ML7223_DMA1_4CH 0x800B +#define PCI_DEVICE_ID_ML7223_DMA2_4CH 0x800E +#define PCI_DEVICE_ID_ML7223_DMA3_4CH 0x8017 +#define PCI_DEVICE_ID_ML7223_DMA4_4CH 0x803B static const struct pci_device_id pch_dma_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 }, @@ -964,6 +968,10 @@ static const struct pci_device_id pch_dma_id_table[] = { { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA2_8CH), 8}, /* PCMIF SPI */ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA3_4CH), 4}, /* FPGA */ { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA4_12CH), 12}, /* I2S */ + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA1_4CH), 4}, /* UART */ + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA2_4CH), 4}, /* Video SPI */ + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA3_4CH), 4}, /* Security */ + { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7223_DMA4_4CH), 4}, /* FPGA */ { 0, }, }; -- cgit v1.2.3 From eb8590b504caacb029dea4540e0b0dcc98da4381 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 9 May 2011 16:09:40 +0900 Subject: pch_dma: modify pci device table definition Signed-off-by: Tomoya MORINAGA Signed-off-by: Vinod Koul --- drivers/dma/pch_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c index 083e698da533..ff5b38f9d45b 100644 --- a/drivers/dma/pch_dma.c +++ b/drivers/dma/pch_dma.c @@ -961,7 +961,7 @@ static void __devexit pch_dma_remove(struct pci_dev *pdev) #define PCI_DEVICE_ID_ML7223_DMA3_4CH 0x8017 #define PCI_DEVICE_ID_ML7223_DMA4_4CH 0x803B -static const struct pci_device_id pch_dma_id_table[] = { +DEFINE_PCI_DEVICE_TABLE(pch_dma_id_table) = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_8CH), 8 }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_EG20T_PCH_DMA_4CH), 4 }, { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7213_DMA1_8CH), 8}, /* UART Video */ -- cgit v1.2.3 From 0f6896f195df014064014493c8287a8e2d18f938 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 13 Apr 2011 11:33:17 +0800 Subject: ACPICA: Split all internal Global Lock functions to new file - evglock These functions were moved from evmisc.c Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/Makefile | 2 +- drivers/acpi/acpica/acevents.h | 17 ++- drivers/acpi/acpica/evglock.c | 335 +++++++++++++++++++++++++++++++++++++++++ drivers/acpi/acpica/evmisc.c | 309 ------------------------------------- 4 files changed, 347 insertions(+), 316 deletions(-) create mode 100644 drivers/acpi/acpica/evglock.c diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile index a1224712fd0c..301bd2d388ad 100644 --- a/drivers/acpi/acpica/Makefile +++ b/drivers/acpi/acpica/Makefile @@ -14,7 +14,7 @@ acpi-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \ acpi-y += evevent.o evregion.o evsci.o evxfevnt.o \ evmisc.o evrgnini.o evxface.o evxfregn.o \ - evgpe.o evgpeblk.o evgpeinit.o evgpeutil.o evxfgpe.o + evgpe.o evgpeblk.o evgpeinit.o evgpeutil.o evxfgpe.o evglock.o acpi-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\ exconvrt.o exfldio.o exoparg1.o exprep.o exresop.o exsystem.o\ diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 41d247daf461..bea3b4899183 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -58,18 +58,23 @@ u32 acpi_ev_fixed_event_detect(void); */ u8 acpi_ev_is_notify_object(struct acpi_namespace_node *node); -acpi_status acpi_ev_acquire_global_lock(u16 timeout); - -acpi_status acpi_ev_release_global_lock(void); - -acpi_status acpi_ev_init_global_lock_handler(void); - u32 acpi_ev_get_gpe_number_index(u32 gpe_number); acpi_status acpi_ev_queue_notify_request(struct acpi_namespace_node *node, u32 notify_value); +/* + * evglock - Global Lock support + */ +acpi_status acpi_ev_init_global_lock_handler(void); + +acpi_status acpi_ev_acquire_global_lock(u16 timeout); + +acpi_status acpi_ev_release_global_lock(void); + +acpi_status acpi_ev_remove_global_lock_handler(void); + /* * evgpe - Low-level GPE support */ diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c new file mode 100644 index 000000000000..56a562a1e5d7 --- /dev/null +++ b/drivers/acpi/acpica/evglock.c @@ -0,0 +1,335 @@ +/****************************************************************************** + * + * Module Name: evglock - Global Lock support + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2011, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +#include +#include "accommon.h" +#include "acevents.h" +#include "acinterp.h" + +#define _COMPONENT ACPI_EVENTS +ACPI_MODULE_NAME("evglock") + +/* Local prototypes */ +static u32 acpi_ev_global_lock_handler(void *context); + +/******************************************************************************* + * + * FUNCTION: acpi_ev_init_global_lock_handler + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Install a handler for the global lock release event + * + ******************************************************************************/ + +acpi_status acpi_ev_init_global_lock_handler(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(ev_init_global_lock_handler); + + /* Attempt installation of the global lock handler */ + + status = acpi_install_fixed_event_handler(ACPI_EVENT_GLOBAL, + acpi_ev_global_lock_handler, + NULL); + + /* + * If the global lock does not exist on this platform, the attempt to + * enable GBL_STATUS will fail (the GBL_ENABLE bit will not stick). + * Map to AE_OK, but mark global lock as not present. Any attempt to + * actually use the global lock will be flagged with an error. + */ + acpi_gbl_global_lock_present = FALSE; + if (status == AE_NO_HARDWARE_RESPONSE) { + ACPI_ERROR((AE_INFO, + "No response from Global Lock hardware, disabling lock")); + + return_ACPI_STATUS(AE_OK); + } + + status = acpi_os_create_lock(&acpi_gbl_global_lock_pending_lock); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + acpi_gbl_global_lock_pending = FALSE; + acpi_gbl_global_lock_present = TRUE; + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_remove_global_lock_handler + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Remove the handler for the Global Lock + * + ******************************************************************************/ + +acpi_status acpi_ev_remove_global_lock_handler(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(ev_remove_global_lock_handler); + + acpi_gbl_global_lock_present = FALSE; + status = acpi_remove_fixed_event_handler(ACPI_EVENT_GLOBAL, + acpi_ev_global_lock_handler); + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_global_lock_handler + * + * PARAMETERS: Context - From thread interface, not used + * + * RETURN: ACPI_INTERRUPT_HANDLED + * + * DESCRIPTION: Invoked directly from the SCI handler when a global lock + * release interrupt occurs. If there is actually a pending + * request for the lock, signal the waiting thread. + * + ******************************************************************************/ + +static u32 acpi_ev_global_lock_handler(void *context) +{ + acpi_status status; + acpi_cpu_flags flags; + + flags = acpi_os_acquire_lock(acpi_gbl_global_lock_pending_lock); + + /* + * If a request for the global lock is not actually pending, + * we are done. This handles "spurious" global lock interrupts + * which are possible (and have been seen) with bad BIOSs. + */ + if (!acpi_gbl_global_lock_pending) { + goto cleanup_and_exit; + } + + /* + * Send a unit to the global lock semaphore. The actual acquisition + * of the global lock will be performed by the waiting thread. + */ + status = acpi_os_signal_semaphore(acpi_gbl_global_lock_semaphore, 1); + if (ACPI_FAILURE(status)) { + ACPI_ERROR((AE_INFO, "Could not signal Global Lock semaphore")); + } + + acpi_gbl_global_lock_pending = FALSE; + + cleanup_and_exit: + + acpi_os_release_lock(acpi_gbl_global_lock_pending_lock, flags); + return (ACPI_INTERRUPT_HANDLED); +} + +/****************************************************************************** + * + * FUNCTION: acpi_ev_acquire_global_lock + * + * PARAMETERS: Timeout - Max time to wait for the lock, in millisec. + * + * RETURN: Status + * + * DESCRIPTION: Attempt to gain ownership of the Global Lock. + * + * MUTEX: Interpreter must be locked + * + * Note: The original implementation allowed multiple threads to "acquire" the + * Global Lock, and the OS would hold the lock until the last thread had + * released it. However, this could potentially starve the BIOS out of the + * lock, especially in the case where there is a tight handshake between the + * Embedded Controller driver and the BIOS. Therefore, this implementation + * allows only one thread to acquire the HW Global Lock at a time, and makes + * the global lock appear as a standard mutex on the OS side. + * + *****************************************************************************/ + +acpi_status acpi_ev_acquire_global_lock(u16 timeout) +{ + acpi_cpu_flags flags; + acpi_status status; + u8 acquired = FALSE; + + ACPI_FUNCTION_TRACE(ev_acquire_global_lock); + + /* + * Only one thread can acquire the GL at a time, the global_lock_mutex + * enforces this. This interface releases the interpreter if we must wait. + */ + status = + acpi_ex_system_wait_mutex(acpi_gbl_global_lock_mutex->mutex. + os_mutex, timeout); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* + * Update the global lock handle and check for wraparound. The handle is + * only used for the external global lock interfaces, but it is updated + * here to properly handle the case where a single thread may acquire the + * lock via both the AML and the acpi_acquire_global_lock interfaces. The + * handle is therefore updated on the first acquire from a given thread + * regardless of where the acquisition request originated. + */ + acpi_gbl_global_lock_handle++; + if (acpi_gbl_global_lock_handle == 0) { + acpi_gbl_global_lock_handle = 1; + } + + /* + * Make sure that a global lock actually exists. If not, just + * treat the lock as a standard mutex. + */ + if (!acpi_gbl_global_lock_present) { + acpi_gbl_global_lock_acquired = TRUE; + return_ACPI_STATUS(AE_OK); + } + + flags = acpi_os_acquire_lock(acpi_gbl_global_lock_pending_lock); + + do { + + /* Attempt to acquire the actual hardware lock */ + + ACPI_ACQUIRE_GLOBAL_LOCK(acpi_gbl_FACS, acquired); + if (acquired) { + acpi_gbl_global_lock_acquired = TRUE; + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "Acquired hardware Global Lock\n")); + break; + } + + /* + * Did not get the lock. The pending bit was set above, and + * we must now wait until we receive the global lock + * released interrupt. + */ + acpi_gbl_global_lock_pending = TRUE; + acpi_os_release_lock(acpi_gbl_global_lock_pending_lock, flags); + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "Waiting for hardware Global Lock\n")); + + /* + * Wait for handshake with the global lock interrupt handler. + * This interface releases the interpreter if we must wait. + */ + status = + acpi_ex_system_wait_semaphore + (acpi_gbl_global_lock_semaphore, ACPI_WAIT_FOREVER); + + flags = acpi_os_acquire_lock(acpi_gbl_global_lock_pending_lock); + + } while (ACPI_SUCCESS(status)); + + acpi_gbl_global_lock_pending = FALSE; + acpi_os_release_lock(acpi_gbl_global_lock_pending_lock, flags); + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ev_release_global_lock + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Releases ownership of the Global Lock. + * + ******************************************************************************/ + +acpi_status acpi_ev_release_global_lock(void) +{ + u8 pending = FALSE; + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE(ev_release_global_lock); + + /* Lock must be already acquired */ + + if (!acpi_gbl_global_lock_acquired) { + ACPI_WARNING((AE_INFO, + "Cannot release the ACPI Global Lock, it has not been acquired")); + return_ACPI_STATUS(AE_NOT_ACQUIRED); + } + + if (acpi_gbl_global_lock_present) { + + /* Allow any thread to release the lock */ + + ACPI_RELEASE_GLOBAL_LOCK(acpi_gbl_FACS, pending); + + /* + * If the pending bit was set, we must write GBL_RLS to the control + * register + */ + if (pending) { + status = + acpi_write_bit_register + (ACPI_BITREG_GLOBAL_LOCK_RELEASE, + ACPI_ENABLE_EVENT); + } + + ACPI_DEBUG_PRINT((ACPI_DB_EXEC, + "Released hardware Global Lock\n")); + } + + acpi_gbl_global_lock_acquired = FALSE; + + /* Release the local GL mutex */ + + acpi_os_release_mutex(acpi_gbl_global_lock_mutex->mutex.os_mutex); + return_ACPI_STATUS(status); +} diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c index 69a3b4aa862b..d0b331844427 100644 --- a/drivers/acpi/acpica/evmisc.c +++ b/drivers/acpi/acpica/evmisc.c @@ -45,7 +45,6 @@ #include "accommon.h" #include "acevents.h" #include "acnamesp.h" -#include "acinterp.h" #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evmisc") @@ -53,10 +52,6 @@ ACPI_MODULE_NAME("evmisc") /* Local prototypes */ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context); -static u32 acpi_ev_global_lock_handler(void *context); - -static acpi_status acpi_ev_remove_global_lock_handler(void); - /******************************************************************************* * * FUNCTION: acpi_ev_is_notify_object @@ -275,310 +270,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context) acpi_ut_delete_generic_state(notify_info); } -/******************************************************************************* - * - * FUNCTION: acpi_ev_global_lock_handler - * - * PARAMETERS: Context - From thread interface, not used - * - * RETURN: ACPI_INTERRUPT_HANDLED - * - * DESCRIPTION: Invoked directly from the SCI handler when a global lock - * release interrupt occurs. If there is actually a pending - * request for the lock, signal the waiting thread. - * - ******************************************************************************/ - -static u32 acpi_ev_global_lock_handler(void *context) -{ - acpi_status status; - acpi_cpu_flags flags; - - flags = acpi_os_acquire_lock(acpi_gbl_global_lock_pending_lock); - - /* - * If a request for the global lock is not actually pending, - * we are done. This handles "spurious" global lock interrupts - * which are possible (and have been seen) with bad BIOSs. - */ - if (!acpi_gbl_global_lock_pending) { - goto cleanup_and_exit; - } - - /* - * Send a unit to the global lock semaphore. The actual acquisition - * of the global lock will be performed by the waiting thread. - */ - status = acpi_os_signal_semaphore(acpi_gbl_global_lock_semaphore, 1); - if (ACPI_FAILURE(status)) { - ACPI_ERROR((AE_INFO, "Could not signal Global Lock semaphore")); - } - - acpi_gbl_global_lock_pending = FALSE; - -cleanup_and_exit: - - acpi_os_release_lock(acpi_gbl_global_lock_pending_lock, flags); - return (ACPI_INTERRUPT_HANDLED); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_init_global_lock_handler - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Install a handler for the global lock release event - * - ******************************************************************************/ - -acpi_status acpi_ev_init_global_lock_handler(void) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_init_global_lock_handler); - - /* Attempt installation of the global lock handler */ - - status = acpi_install_fixed_event_handler(ACPI_EVENT_GLOBAL, - acpi_ev_global_lock_handler, - NULL); - - /* - * If the global lock does not exist on this platform, the attempt to - * enable GBL_STATUS will fail (the GBL_ENABLE bit will not stick). - * Map to AE_OK, but mark global lock as not present. Any attempt to - * actually use the global lock will be flagged with an error. - */ - acpi_gbl_global_lock_present = FALSE; - if (status == AE_NO_HARDWARE_RESPONSE) { - ACPI_ERROR((AE_INFO, - "No response from Global Lock hardware, disabling lock")); - - return_ACPI_STATUS(AE_OK); - } - - status = acpi_os_create_lock(&acpi_gbl_global_lock_pending_lock); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - acpi_gbl_global_lock_pending = FALSE; - acpi_gbl_global_lock_present = TRUE; - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_remove_global_lock_handler - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Remove the handler for the Global Lock - * - ******************************************************************************/ - -static acpi_status acpi_ev_remove_global_lock_handler(void) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_remove_global_lock_handler); - - acpi_gbl_global_lock_present = FALSE; - status = acpi_remove_fixed_event_handler(ACPI_EVENT_GLOBAL, - acpi_ev_global_lock_handler); - - return_ACPI_STATUS(status); -} - -/****************************************************************************** - * - * FUNCTION: acpi_ev_acquire_global_lock - * - * PARAMETERS: Timeout - Max time to wait for the lock, in millisec. - * - * RETURN: Status - * - * DESCRIPTION: Attempt to gain ownership of the Global Lock. - * - * MUTEX: Interpreter must be locked - * - * Note: The original implementation allowed multiple threads to "acquire" the - * Global Lock, and the OS would hold the lock until the last thread had - * released it. However, this could potentially starve the BIOS out of the - * lock, especially in the case where there is a tight handshake between the - * Embedded Controller driver and the BIOS. Therefore, this implementation - * allows only one thread to acquire the HW Global Lock at a time, and makes - * the global lock appear as a standard mutex on the OS side. - * - *****************************************************************************/ -static acpi_thread_id acpi_ev_global_lock_thread_id; -static int acpi_ev_global_lock_acquired; - -acpi_status acpi_ev_acquire_global_lock(u16 timeout) -{ - acpi_cpu_flags flags; - acpi_status status; - u8 acquired = FALSE; - - ACPI_FUNCTION_TRACE(ev_acquire_global_lock); - - /* - * Only one thread can acquire the GL at a time, the global_lock_mutex - * enforces this. This interface releases the interpreter if we must wait. - */ - status = acpi_ex_system_wait_mutex( - acpi_gbl_global_lock_mutex->mutex.os_mutex, 0); - if (status == AE_TIME) { - if (acpi_ev_global_lock_thread_id == acpi_os_get_thread_id()) { - acpi_ev_global_lock_acquired++; - return AE_OK; - } - } - - if (ACPI_FAILURE(status)) { - status = acpi_ex_system_wait_mutex( - acpi_gbl_global_lock_mutex->mutex.os_mutex, - timeout); - } - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - acpi_ev_global_lock_thread_id = acpi_os_get_thread_id(); - acpi_ev_global_lock_acquired++; - - /* - * Update the global lock handle and check for wraparound. The handle is - * only used for the external global lock interfaces, but it is updated - * here to properly handle the case where a single thread may acquire the - * lock via both the AML and the acpi_acquire_global_lock interfaces. The - * handle is therefore updated on the first acquire from a given thread - * regardless of where the acquisition request originated. - */ - acpi_gbl_global_lock_handle++; - if (acpi_gbl_global_lock_handle == 0) { - acpi_gbl_global_lock_handle = 1; - } - - /* - * Make sure that a global lock actually exists. If not, just - * treat the lock as a standard mutex. - */ - if (!acpi_gbl_global_lock_present) { - acpi_gbl_global_lock_acquired = TRUE; - return_ACPI_STATUS(AE_OK); - } - - flags = acpi_os_acquire_lock(acpi_gbl_global_lock_pending_lock); - - do { - - /* Attempt to acquire the actual hardware lock */ - - ACPI_ACQUIRE_GLOBAL_LOCK(acpi_gbl_FACS, acquired); - if (acquired) { - acpi_gbl_global_lock_acquired = TRUE; - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "Acquired hardware Global Lock\n")); - break; - } - - /* - * Did not get the lock. The pending bit was set above, and - * we must now wait until we receive the global lock - * released interrupt. - */ - acpi_gbl_global_lock_pending = TRUE; - acpi_os_release_lock(acpi_gbl_global_lock_pending_lock, flags); - - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "Waiting for hardware Global Lock\n")); - - /* - * Wait for handshake with the global lock interrupt handler. - * This interface releases the interpreter if we must wait. - */ - status = - acpi_ex_system_wait_semaphore - (acpi_gbl_global_lock_semaphore, ACPI_WAIT_FOREVER); - - flags = acpi_os_acquire_lock(acpi_gbl_global_lock_pending_lock); - - } while (ACPI_SUCCESS(status)); - - acpi_gbl_global_lock_pending = FALSE; - acpi_os_release_lock(acpi_gbl_global_lock_pending_lock, flags); - - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_release_global_lock - * - * PARAMETERS: None - * - * RETURN: Status - * - * DESCRIPTION: Releases ownership of the Global Lock. - * - ******************************************************************************/ - -acpi_status acpi_ev_release_global_lock(void) -{ - u8 pending = FALSE; - acpi_status status = AE_OK; - - ACPI_FUNCTION_TRACE(ev_release_global_lock); - - /* Lock must be already acquired */ - - if (!acpi_gbl_global_lock_acquired) { - ACPI_WARNING((AE_INFO, - "Cannot release the ACPI Global Lock, it has not been acquired")); - return_ACPI_STATUS(AE_NOT_ACQUIRED); - } - - acpi_ev_global_lock_acquired--; - if (acpi_ev_global_lock_acquired > 0) { - return AE_OK; - } - - if (acpi_gbl_global_lock_present) { - - /* Allow any thread to release the lock */ - - ACPI_RELEASE_GLOBAL_LOCK(acpi_gbl_FACS, pending); - - /* - * If the pending bit was set, we must write GBL_RLS to the control - * register - */ - if (pending) { - status = - acpi_write_bit_register - (ACPI_BITREG_GLOBAL_LOCK_RELEASE, - ACPI_ENABLE_EVENT); - } - - ACPI_DEBUG_PRINT((ACPI_DB_EXEC, - "Released hardware Global Lock\n")); - } - - acpi_gbl_global_lock_acquired = FALSE; - - /* Release the local GL mutex */ - acpi_ev_global_lock_thread_id = 0; - acpi_ev_global_lock_acquired = 0; - acpi_os_release_mutex(acpi_gbl_global_lock_mutex->mutex.os_mutex); - return_ACPI_STATUS(status); -} - /****************************************************************************** * * FUNCTION: acpi_ev_terminate -- cgit v1.2.3 From 945488b9c5fc3f85e3f6a3580235b5c73febc8a6 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 13 Apr 2011 13:15:58 +0800 Subject: ACPICA: Add more methods eligible for NULL package element removal This change adds another group of predefined names to the list of names eligible to have NULL package elements dynamically removed. This group is the names that return a single variable-length package containing simple data types such as integers, buffers, strings. This includes: _ALx,_BCL,_CID, _DOD,_EDL,_FIX,_PCL,_PLD,_PMD,_PRx,_PSL,_Sx, and _TZD. http://www.acpica.org/bugzilla/show_bug.cgi?id=914 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/nsrepair.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 1d76ac85b5e7..ac7b854b0bd7 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -74,7 +74,6 @@ ACPI_MODULE_NAME("nsrepair") * * Additional possible repairs: * - * Optional/unnecessary NULL package elements removed * Required package elements that are NULL replaced by Integer/String/Buffer * Incorrect standalone package wrapped with required outer package * @@ -623,16 +622,12 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, ACPI_FUNCTION_NAME(ns_remove_null_elements); /* - * PTYPE1 packages contain no subpackages. - * PTYPE2 packages contain a variable number of sub-packages. We can - * safely remove all NULL elements from the PTYPE2 packages. + * We can safely remove all NULL elements from these package types: + * PTYPE1_VAR packages contain a variable number of simple data types. + * PTYPE2 packages contain a variable number of sub-packages. */ switch (package_type) { - case ACPI_PTYPE1_FIXED: case ACPI_PTYPE1_VAR: - case ACPI_PTYPE1_OPTION: - return; - case ACPI_PTYPE2: case ACPI_PTYPE2_COUNT: case ACPI_PTYPE2_PKG_COUNT: @@ -642,6 +637,8 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data, break; default: + case ACPI_PTYPE1_FIXED: + case ACPI_PTYPE1_OPTION: return; } -- cgit v1.2.3 From 82a1b7cb83b6bd7d2fe3972e847c8ccbff55cb9c Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 13 Apr 2011 13:19:35 +0800 Subject: ACPICA: Update internal address SpaceID for DataTable regions Moved this internal space id in preparation for ACPI 5.0 changes that will include some new space IDs. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acconfig.h | 2 +- drivers/acpi/acpica/amlcode.h | 15 --------------- drivers/acpi/acpica/dswload.c | 2 +- drivers/acpi/acpica/dswload2.c | 2 +- drivers/acpi/acpica/excreate.c | 3 ++- drivers/acpi/acpica/utdecode.c | 5 +++-- include/acpi/actypes.h | 13 +++++++++++-- 7 files changed, 19 insertions(+), 23 deletions(-) diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index ab87396c2c07..c115bb9bd4d3 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -187,7 +187,7 @@ /* Operation regions */ -#define ACPI_NUM_PREDEFINED_REGIONS 9 +#define ACPI_NUM_PREDEFINED_REGIONS 8 #define ACPI_USER_REGION_BEGIN 0x80 /* Maximum space_ids for Operation Regions */ diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h index f4f0998d3967..1077f17859ed 100644 --- a/drivers/acpi/acpica/amlcode.h +++ b/drivers/acpi/acpica/amlcode.h @@ -394,21 +394,6 @@ #define AML_CLASS_METHOD_CALL 0x09 #define AML_CLASS_UNKNOWN 0x0A -/* Predefined Operation Region space_iDs */ - -typedef enum { - REGION_MEMORY = 0, - REGION_IO, - REGION_PCI_CONFIG, - REGION_EC, - REGION_SMBUS, - REGION_CMOS, - REGION_PCI_BAR, - REGION_IPMI, - REGION_DATA_TABLE, /* Internal use only */ - REGION_FIXED_HW = 0x7F -} AML_REGION_TYPES; - /* Comparison operation codes for match_op operator */ typedef enum { diff --git a/drivers/acpi/acpica/dswload.c b/drivers/acpi/acpica/dswload.c index 23a3b1ab20c1..324acec1179a 100644 --- a/drivers/acpi/acpica/dswload.c +++ b/drivers/acpi/acpica/dswload.c @@ -450,7 +450,7 @@ acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state) status = acpi_ex_create_region(op->named.data, op->named.length, - REGION_DATA_TABLE, + ACPI_ADR_SPACE_DATA_TABLE, walk_state); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); diff --git a/drivers/acpi/acpica/dswload2.c b/drivers/acpi/acpica/dswload2.c index 4be4e921dfe1..976318138c56 100644 --- a/drivers/acpi/acpica/dswload2.c +++ b/drivers/acpi/acpica/dswload2.c @@ -562,7 +562,7 @@ acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state) ((op->common.value.arg)->common.value. integer); } else { - region_space = REGION_DATA_TABLE; + region_space = ACPI_ADR_SPACE_DATA_TABLE; } /* diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c index e7b372d17667..110711afada8 100644 --- a/drivers/acpi/acpica/excreate.c +++ b/drivers/acpi/acpica/excreate.c @@ -305,7 +305,8 @@ acpi_ex_create_region(u8 * aml_start, * range */ if ((region_space >= ACPI_NUM_PREDEFINED_REGIONS) && - (region_space < ACPI_USER_REGION_BEGIN)) { + (region_space < ACPI_USER_REGION_BEGIN) && + (region_space != ACPI_ADR_SPACE_DATA_TABLE)) { ACPI_ERROR((AE_INFO, "Invalid AddressSpace type 0x%X", region_space)); return_ACPI_STATUS(AE_AML_INVALID_SPACE_ID); diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c index 136a814cec69..97cb36f85ce9 100644 --- a/drivers/acpi/acpica/utdecode.c +++ b/drivers/acpi/acpica/utdecode.c @@ -170,8 +170,7 @@ const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = { "SMBus", "SystemCMOS", "PCIBARTarget", - "IPMI", - "DataTable" + "IPMI" }; char *acpi_ut_get_region_name(u8 space_id) @@ -179,6 +178,8 @@ char *acpi_ut_get_region_name(u8 space_id) if (space_id >= ACPI_USER_REGION_BEGIN) { return ("UserDefinedRegion"); + } else if (space_id == ACPI_ADR_SPACE_DATA_TABLE) { + return ("DataTable"); } else if (space_id == ACPI_ADR_SPACE_FIXED_HARDWARE) { return ("FunctionalFixedHW"); } else if (space_id >= ACPI_NUM_PREDEFINED_REGIONS) { diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 64f838beaabf..ad77c613c743 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -712,8 +712,17 @@ typedef u8 acpi_adr_space_type; #define ACPI_ADR_SPACE_CMOS (acpi_adr_space_type) 5 #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6 #define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7 -#define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 8 -#define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 127 + +/* + * Special region types + * + * Note: A Data Table region is a special type of operation region + * that has its own AML opcode. However, internally, the AML + * interpreter simply creates an operation region with an an address + * space type of ACPI_ADR_SPACE_DATA_TABLE. + */ +#define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */ +#define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F /* * bit_register IDs -- cgit v1.2.3 From 07aa99e9df2184e78068f7d5414e29e4a5a1b452 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 13 Apr 2011 13:20:49 +0800 Subject: ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place Moved to where the predefined regions are actually defined. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/acconfig.h | 1 - include/acpi/actypes.h | 4 +++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index c115bb9bd4d3..bc533dde16c4 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -187,7 +187,6 @@ /* Operation regions */ -#define ACPI_NUM_PREDEFINED_REGIONS 8 #define ACPI_USER_REGION_BEGIN 0x80 /* Maximum space_ids for Operation Regions */ diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index ad77c613c743..f3b29fa5654e 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -713,8 +713,10 @@ typedef u8 acpi_adr_space_type; #define ACPI_ADR_SPACE_PCI_BAR_TARGET (acpi_adr_space_type) 6 #define ACPI_ADR_SPACE_IPMI (acpi_adr_space_type) 7 +#define ACPI_NUM_PREDEFINED_REGIONS 8 + /* - * Special region types + * Special Address Spaces * * Note: A Data Table region is a special type of operation region * that has its own AML opcode. However, internally, the AML -- cgit v1.2.3 From e2066ca1b211ff08325c98be9fb8ad95affbaba8 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Wed, 13 Apr 2011 13:22:04 +0800 Subject: ACPICA: Execute an orphan _REG method under the EC device This change will force the execution of a _REG method underneath the EC device even if there is no corresponding operation region of type EmbeddedControl. Fixes a problem seen on some machines and apparently is compatible with Windows behavior. http://www.acpica.org/bugzilla/show_bug.cgi?id=875 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/acpica/evregion.c | 121 ++++++++++++++++++++++++++++++++++++++++- drivers/acpi/acpica/evrgnini.c | 2 +- drivers/acpi/acpica/evxfregn.c | 13 +++-- include/acpi/actypes.h | 5 ++ 4 files changed, 132 insertions(+), 9 deletions(-) diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c index bea7223d7a71..f0edf5c43c03 100644 --- a/drivers/acpi/acpica/evregion.c +++ b/drivers/acpi/acpica/evregion.c @@ -55,6 +55,8 @@ static u8 acpi_ev_has_default_handler(struct acpi_namespace_node *node, acpi_adr_space_type space_id); +static void acpi_ev_orphan_ec_reg_method(void); + static acpi_status acpi_ev_reg_run(acpi_handle obj_handle, u32 level, void *context, void **return_value); @@ -561,7 +563,9 @@ acpi_ev_detach_region(union acpi_operand_object *region_obj, /* Now stop region accesses by executing the _REG method */ - status = acpi_ev_execute_reg_method(region_obj, 0); + status = + acpi_ev_execute_reg_method(region_obj, + ACPI_REG_DISCONNECT); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "from region _REG, [%s]", @@ -1062,6 +1066,12 @@ acpi_ev_execute_reg_methods(struct acpi_namespace_node *node, ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run, NULL, &space_id, NULL); + /* Special case for EC: handle "orphan" _REG methods with no region */ + + if (space_id == ACPI_ADR_SPACE_EC) { + acpi_ev_orphan_ec_reg_method(); + } + return_ACPI_STATUS(status); } @@ -1120,6 +1130,113 @@ acpi_ev_reg_run(acpi_handle obj_handle, return (AE_OK); } - status = acpi_ev_execute_reg_method(obj_desc, 1); + status = acpi_ev_execute_reg_method(obj_desc, ACPI_REG_CONNECT); return (status); } + +/******************************************************************************* + * + * FUNCTION: acpi_ev_orphan_ec_reg_method + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Execute an "orphan" _REG method that appears under the EC + * device. This is a _REG method that has no corresponding region + * within the EC device scope. The orphan _REG method appears to + * have been enabled by the description of the ECDT in the ACPI + * specification: "The availability of the region space can be + * detected by providing a _REG method object underneath the + * Embedded Controller device." + * + * To quickly access the EC device, we use the EC_ID that appears + * within the ECDT. Otherwise, we would need to perform a time- + * consuming namespace walk, executing _HID methods to find the + * EC device. + * + ******************************************************************************/ + +static void acpi_ev_orphan_ec_reg_method(void) +{ + struct acpi_table_ecdt *table; + acpi_status status; + struct acpi_object_list args; + union acpi_object objects[2]; + struct acpi_namespace_node *ec_device_node; + struct acpi_namespace_node *reg_method; + struct acpi_namespace_node *next_node; + + ACPI_FUNCTION_TRACE(ev_orphan_ec_reg_method); + + /* Get the ECDT (if present in system) */ + + status = acpi_get_table(ACPI_SIG_ECDT, 0, + ACPI_CAST_INDIRECT_PTR(struct acpi_table_header, + &table)); + if (ACPI_FAILURE(status)) { + return_VOID; + } + + /* We need a valid EC_ID string */ + + if (!(*table->id)) { + return_VOID; + } + + /* Namespace is currently locked, must release */ + + (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); + + /* Get a handle to the EC device referenced in the ECDT */ + + status = acpi_get_handle(NULL, + ACPI_CAST_PTR(char, table->id), + ACPI_CAST_PTR(acpi_handle, &ec_device_node)); + if (ACPI_FAILURE(status)) { + goto exit; + } + + /* Get a handle to a _REG method immediately under the EC device */ + + status = acpi_get_handle(ec_device_node, + METHOD_NAME__REG, ACPI_CAST_PTR(acpi_handle, + ®_method)); + if (ACPI_FAILURE(status)) { + goto exit; + } + + /* + * Execute the _REG method only if there is no Operation Region in + * this scope with the Embedded Controller space ID. Otherwise, it + * will already have been executed. Note, this allows for Regions + * with other space IDs to be present; but the code below will then + * execute the _REG method with the EC space ID argument. + */ + next_node = acpi_ns_get_next_node(ec_device_node, NULL); + while (next_node) { + if ((next_node->type == ACPI_TYPE_REGION) && + (next_node->object) && + (next_node->object->region.space_id == ACPI_ADR_SPACE_EC)) { + goto exit; /* Do not execute _REG */ + } + next_node = acpi_ns_get_next_node(ec_device_node, next_node); + } + + /* Evaluate the _REG(EC,Connect) method */ + + args.count = 2; + args.pointer = objects; + objects[0].type = ACPI_TYPE_INTEGER; + objects[0].integer.value = ACPI_ADR_SPACE_EC; + objects[1].type = ACPI_TYPE_INTEGER; + objects[1].integer.value = ACPI_REG_CONNECT; + + status = acpi_evaluate_object(reg_method, NULL, &args, NULL); + + exit: + /* We ignore all errors from above, don't care */ + + status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE); + return_VOID; +} diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c index 9659cee6093e..55a5d35ef34a 100644 --- a/drivers/acpi/acpica/evrgnini.c +++ b/drivers/acpi/acpica/evrgnini.c @@ -637,7 +637,7 @@ acpi_ev_initialize_region(union acpi_operand_object *region_obj, status = acpi_ev_execute_reg_method - (region_obj, 1); + (region_obj, ACPI_REG_CONNECT); if (acpi_ns_locked) { status = diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c index c85c8c45599d..00cd95692a91 100644 --- a/drivers/acpi/acpica/evxfregn.c +++ b/drivers/acpi/acpica/evxfregn.c @@ -130,20 +130,21 @@ acpi_install_address_space_handler(acpi_handle device, case ACPI_ADR_SPACE_PCI_CONFIG: case ACPI_ADR_SPACE_DATA_TABLE: - if (acpi_gbl_reg_methods_executed) { + if (!acpi_gbl_reg_methods_executed) { - /* Run all _REG methods for this address space */ - - status = acpi_ev_execute_reg_methods(node, space_id); + /* We will defer execution of the _REG methods for this space */ + goto unlock_and_exit; } break; default: - - status = acpi_ev_execute_reg_methods(node, space_id); break; } + /* Run all _REG methods for this address space */ + + status = acpi_ev_execute_reg_methods(node, space_id); + unlock_and_exit: (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE); return_ACPI_STATUS(status); diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index f3b29fa5654e..a6412b82a572 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -726,6 +726,11 @@ typedef u8 acpi_adr_space_type; #define ACPI_ADR_SPACE_DATA_TABLE (acpi_adr_space_type) 0x7E /* Internal to ACPICA only */ #define ACPI_ADR_SPACE_FIXED_HARDWARE (acpi_adr_space_type) 0x7F +/* Values for _REG connection code */ + +#define ACPI_REG_DISCONNECT 0 +#define ACPI_REG_CONNECT 1 + /* * bit_register IDs * -- cgit v1.2.3 From 0a63e2308cbbdc7e2f5645769afaf53785bcb9fa Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Fri, 15 Apr 2011 09:12:47 +0800 Subject: ACPICA: Update to version 20110413 Version 20110413 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- include/acpi/acpixf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h index f6ad63d25b73..2ed0a8486c19 100644 --- a/include/acpi/acpixf.h +++ b/include/acpi/acpixf.h @@ -47,7 +47,7 @@ /* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20110316 +#define ACPI_CA_VERSION 0x20110413 #include "actypes.h" #include "actbl.h" -- cgit v1.2.3 From 85f60ae4ee817174b0f78928bc7066f28c3551ab Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 29 Apr 2011 00:18:16 -0600 Subject: dt/flattree: explicitly pass command line pointer to early_init_dt_scan_chosen This patch drops the reference to a global 'cmd_line' variable from early_init_dt_scan_chosen, and instead passes the pointer to the command line string via the *data argument. Each architecture does something slightly different with the initial command line, so it makes sense for the architecture to be able to specify the variable name. Signed-off-by: Grant Likely --- arch/microblaze/kernel/prom.c | 2 +- arch/mips/include/asm/prom.h | 3 --- arch/mips/kernel/prom.c | 3 ++- arch/powerpc/kernel/prom.c | 2 +- drivers/of/fdt.c | 8 ++++---- 5 files changed, 8 insertions(+), 10 deletions(-) diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index 00ee90f08343..b15cc219b1d9 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -130,7 +130,7 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h index f29b862d9db3..857d9b7858ad 100644 --- a/arch/mips/include/asm/prom.h +++ b/arch/mips/include/asm/prom.h @@ -14,9 +14,6 @@ #ifdef CONFIG_OF #include -/* which is compatible with the flattened device tree (FDT) */ -#define cmd_line arcs_cmdline - extern int early_init_dt_scan_memory_arch(unsigned long node, const char *uname, int depth, void *data); diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c index a19811e98a41..5b7eade41fa3 100644 --- a/arch/mips/kernel/prom.c +++ b/arch/mips/kernel/prom.c @@ -83,7 +83,8 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, arcs_cmdline); + /* Scan memory nodes */ of_scan_flat_dt(early_init_dt_scan_root, NULL); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index e74fa12afc82..c173bee09cee 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -691,7 +691,7 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen_ppc, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 8b63a691a9ed..65200af29c52 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -670,7 +670,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, pr_debug("search \"chosen\", depth: %d, uname: %s\n", depth, uname); - if (depth != 1 || + if (depth != 1 || !data || (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) return 0; @@ -679,16 +679,16 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, /* Retrieve command line */ p = of_get_flat_dt_prop(node, "bootargs", &l); if (p != NULL && l > 0) - strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE)); + strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); #ifdef CONFIG_CMDLINE #ifndef CONFIG_CMDLINE_FORCE if (p == NULL || l == 0 || (l == 1 && (*p) == 0)) #endif - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); + strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE); #endif /* CONFIG_CMDLINE */ - pr_debug("Command line is: %s\n", cmd_line); + pr_debug("Command line is: %s\n", (char*)data); /* break now */ return 1; -- cgit v1.2.3 -- cgit v1.2.3 From 4c2896e88d976d0e5b2213c64cde885f5677fa2b Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Apr 2011 14:27:20 -0600 Subject: arm/dt: Make __vet_atags also accept a dtb image The dtb is passed to the kernel via register r2, which is the same method that is used to pass an atags pointer. This patch modifies __vet_atags to not clear r2 when it encounters a dtb image. v2: fixed bugs pointed out by Nicolas Pitre Tested-by: Tony Lindgren Signed-off-by: Grant Likely --- arch/arm/kernel/head-common.S | 24 ++++++++++++++++++------ arch/arm/kernel/head.S | 8 ++++---- 2 files changed, 22 insertions(+), 10 deletions(-) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index c84b57d27d07..854bd22380d3 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -15,6 +15,12 @@ #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2) +#ifdef CONFIG_CPU_BIG_ENDIAN +#define OF_DT_MAGIC 0xd00dfeed +#else +#define OF_DT_MAGIC 0xedfe0dd0 /* 0xd00dfeed in big-endian */ +#endif + /* * Exception handling. Something went wrong and we can't proceed. We * ought to tell the user, but since we don't have any guarantee that @@ -28,20 +34,26 @@ /* Determine validity of the r2 atags pointer. The heuristic requires * that the pointer be aligned, in the first 16k of physical RAM and - * that the ATAG_CORE marker is first and present. Future revisions + * that the ATAG_CORE marker is first and present. If CONFIG_OF_FLATTREE + * is selected, then it will also accept a dtb pointer. Future revisions * of this function may be more lenient with the physical address and * may also be able to move the ATAGS block if necessary. * * Returns: - * r2 either valid atags pointer, or zero + * r2 either valid atags pointer, valid dtb pointer, or zero * r5, r6 corrupted */ __vet_atags: tst r2, #0x3 @ aligned? bne 1f - ldr r5, [r2, #0] @ is first tag ATAG_CORE? - cmp r5, #ATAG_CORE_SIZE + ldr r5, [r2, #0] +#ifdef CONFIG_OF_FLATTREE + ldr r6, =OF_DT_MAGIC @ is it a DTB? + cmp r5, r6 + beq 2f +#endif + cmp r5, #ATAG_CORE_SIZE @ is first tag ATAG_CORE? cmpne r5, #ATAG_CORE_SIZE_EMPTY bne 1f ldr r5, [r2, #4] @@ -49,7 +61,7 @@ __vet_atags: cmp r5, r6 bne 1f - mov pc, lr @ atag pointer is ok +2: mov pc, lr @ atag/dtb pointer is ok 1: mov r2, #0 mov pc, lr @@ -61,7 +73,7 @@ ENDPROC(__vet_atags) * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags/dtb pointer * r9 = processor ID */ __INIT diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c9173cfbbc74..a5e5c5b9b48e 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -59,7 +59,7 @@ * * This is normally called from the decompressor code. The requirements * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, - * r1 = machine nr, r2 = atags pointer. + * r1 = machine nr, r2 = atags or dtb pointer. * * This code is mostly position independent, so if you link the kernel at * 0xc0008000, you call this at __pa(0xc0008000). @@ -91,7 +91,7 @@ ENTRY(stext) #endif /* - * r1 = machine no, r2 = atags, + * r1 = machine no, r2 = atags or dtb, * r8 = phys_offset, r9 = cpuid, r10 = procinfo */ bl __vet_atags @@ -339,7 +339,7 @@ __secondary_data: * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags or dtb pointer * r4 = page table pointer * r9 = processor ID * r13 = *virtual* address to jump to upon completion @@ -376,7 +376,7 @@ ENDPROC(__enable_mmu) * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags or dtb pointer * r9 = processor ID * r13 = *virtual* address to jump to upon completion * -- cgit v1.2.3 From 9eb8f6743b076b67f00776cda4330c802e157b41 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Apr 2011 14:27:20 -0600 Subject: arm/dt: Allow CONFIG_OF on ARM Add some basic empty infrastructure for DT support on ARM. v5: - Fix off-by-one error in size calculation of initrd - Stop mucking with cmd_line, and load command line from dt into boot_command_line instead which matches the behaviour of ATAGS booting v3: - moved cmd_line export and initrd setup to this patch to make the series bisectable. - switched to alloc_bootmem_align() for allocation when unflattening the device tree. memblock_alloc() was not the right interface. Signed-off-by: Jeremy Kerr Tested-by: Tony Lindgren Acked-by: Nicolas Pitre Acked-by: Russell King Signed-off-by: Grant Likely --- arch/arm/Kconfig | 7 +++++++ arch/arm/include/asm/prom.h | 25 +++++++++++++++++++++++ arch/arm/include/asm/setup.h | 2 ++ arch/arm/kernel/Makefile | 1 + arch/arm/kernel/devtree.c | 47 ++++++++++++++++++++++++++++++++++++++++++++ arch/arm/kernel/setup.c | 2 +- arch/arm/mm/init.c | 9 +++++++++ 7 files changed, 92 insertions(+), 1 deletion(-) create mode 100644 arch/arm/include/asm/prom.h create mode 100644 arch/arm/kernel/devtree.c diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 377a7a595b08..efc7f3c87f1d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1687,6 +1687,13 @@ endmenu menu "Boot options" +config USE_OF + bool "Flattened Device Tree support" + select OF + select OF_EARLY_FLATTREE + help + Include support for flattened device tree machine descriptions. + # Compressed boot loader in ROM. Yes, we really want to ask about # TEXT and BSS so we preserve their values in the config files. config ZBOOT_ROM_TEXT diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h new file mode 100644 index 000000000000..8f1037fdc08f --- /dev/null +++ b/arch/arm/include/asm/prom.h @@ -0,0 +1,25 @@ +/* + * arch/arm/include/asm/prom.h + * + * Copyright (C) 2009 Canonical Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __ASMARM_PROM_H +#define __ASMARM_PROM_H + +#ifdef CONFIG_OF + +#include +#include + +static inline void irq_dispose_mapping(unsigned int virq) +{ + return; +} + +#endif /* CONFIG_OF */ +#endif /* ASMARM_PROM_H */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 95176af3df8c..93b4702ffa0f 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -217,6 +217,8 @@ extern struct meminfo meminfo; #define bank_phys_end(bank) ((bank)->start + (bank)->size) #define bank_phys_size(bank) (bank)->size +extern int arm_add_memory(phys_addr_t start, unsigned long size); + #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 8d95446150a3..908c78cb1d1c 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARM_UNWIND) += unwind.o obj-$(CONFIG_HAVE_TCM) += tcm.o +obj-$(CONFIG_OF) += devtree.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_SWP_EMULATE) += swp_emulate.o CFLAGS_swp_emulate.o := -Wa,-march=armv7-a diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c new file mode 100644 index 000000000000..75e3df85b88c --- /dev/null +++ b/arch/arm/kernel/devtree.c @@ -0,0 +1,47 @@ +/* + * linux/arch/arm/kernel/devtree.c + * + * Copyright (C) 2009 Canonical Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + arm_add_memory(base, size); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return alloc_bootmem_align(size, align); +} + +/** + * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq# + * + * Currently the mapping mechanism is trivial; simple flat hwirq numbers are + * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not + * supported. + */ +unsigned int irq_create_of_mapping(struct device_node *controller, + const u32 *intspec, unsigned int intsize) +{ + return intspec[0]; +} +EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 006c1e884eaf..109997e3fe4a 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -466,7 +466,7 @@ static struct machine_desc * __init setup_machine(unsigned int nr) /* can't use cpu_relax() here as it may require MMU setup */; } -static int __init arm_add_memory(phys_addr_t start, unsigned long size) +int __init arm_add_memory(phys_addr_t start, unsigned long size) { struct membank *bank = &meminfo.bank[meminfo.nr_banks]; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index e5f6fc428348..26c405421f4e 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -71,6 +72,14 @@ static int __init parse_tag_initrd2(const struct tag *tag) __tagtable(ATAG_INITRD2, parse_tag_initrd2); +#ifdef CONFIG_OF_FLATTREE +void __init early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end) +{ + phys_initrd_start = start; + phys_initrd_size = end - start; +} +#endif /* CONFIG_OF_FLATTREE */ + /* * This keeps memory configuration data used by a couple memory * initialization functions, as well as show_mem() for the skipping -- cgit v1.2.3 From a73ddc61e8f14ddc7ab6e6a11dc882ef6a697114 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 11 May 2011 16:27:51 +0900 Subject: ARM: S5P6442: Removing ARCH_S5P6442 Signed-off-by: Kukjin Kim --- Documentation/arm/Samsung/Overview.txt | 2 - arch/arm/Kconfig | 16 +- arch/arm/Makefile | 1 - arch/arm/common/Kconfig | 2 +- arch/arm/configs/s5p6442_defconfig | 65 ---- arch/arm/mach-s5p6442/Kconfig | 25 -- arch/arm/mach-s5p6442/Makefile | 24 -- arch/arm/mach-s5p6442/Makefile.boot | 2 - arch/arm/mach-s5p6442/clock.c | 420 ----------------------- arch/arm/mach-s5p6442/cpu.c | 143 -------- arch/arm/mach-s5p6442/dev-audio.c | 217 ------------ arch/arm/mach-s5p6442/dev-spi.c | 121 ------- arch/arm/mach-s5p6442/dma.c | 105 ------ arch/arm/mach-s5p6442/include/mach/debug-macro.S | 35 -- arch/arm/mach-s5p6442/include/mach/dma.h | 26 -- arch/arm/mach-s5p6442/include/mach/entry-macro.S | 48 --- arch/arm/mach-s5p6442/include/mach/gpio.h | 123 ------- arch/arm/mach-s5p6442/include/mach/hardware.h | 18 - arch/arm/mach-s5p6442/include/mach/io.h | 17 - arch/arm/mach-s5p6442/include/mach/irqs.h | 87 ----- arch/arm/mach-s5p6442/include/mach/map.h | 76 ---- arch/arm/mach-s5p6442/include/mach/memory.h | 19 - arch/arm/mach-s5p6442/include/mach/pwm-clock.h | 70 ---- arch/arm/mach-s5p6442/include/mach/regs-clock.h | 104 ------ arch/arm/mach-s5p6442/include/mach/regs-irq.h | 19 - arch/arm/mach-s5p6442/include/mach/spi-clocks.h | 17 - arch/arm/mach-s5p6442/include/mach/system.h | 23 -- arch/arm/mach-s5p6442/include/mach/tick.h | 26 -- arch/arm/mach-s5p6442/include/mach/timex.h | 24 -- arch/arm/mach-s5p6442/include/mach/uncompress.h | 24 -- arch/arm/mach-s5p6442/include/mach/vmalloc.h | 17 - arch/arm/mach-s5p6442/init.c | 44 --- arch/arm/mach-s5p6442/mach-smdk6442.c | 102 ------ arch/arm/mach-s5p6442/setup-i2c0.c | 28 -- arch/arm/plat-s5p/Kconfig | 2 +- arch/arm/plat-s5p/cpu.c | 10 - arch/arm/plat-s5p/include/plat/s5p6442.h | 33 -- arch/arm/plat-samsung/include/plat/cpu.h | 1 - arch/arm/plat-samsung/include/plat/debug-macro.S | 2 +- arch/arm/plat-samsung/include/plat/devs.h | 6 - arch/arm/plat-samsung/include/plat/regs-serial.h | 2 +- arch/arm/plat-samsung/include/plat/s3c64xx-spi.h | 1 - 42 files changed, 6 insertions(+), 2141 deletions(-) delete mode 100644 arch/arm/configs/s5p6442_defconfig delete mode 100644 arch/arm/mach-s5p6442/Kconfig delete mode 100644 arch/arm/mach-s5p6442/Makefile delete mode 100644 arch/arm/mach-s5p6442/Makefile.boot delete mode 100644 arch/arm/mach-s5p6442/clock.c delete mode 100644 arch/arm/mach-s5p6442/cpu.c delete mode 100644 arch/arm/mach-s5p6442/dev-audio.c delete mode 100644 arch/arm/mach-s5p6442/dev-spi.c delete mode 100644 arch/arm/mach-s5p6442/dma.c delete mode 100644 arch/arm/mach-s5p6442/include/mach/debug-macro.S delete mode 100644 arch/arm/mach-s5p6442/include/mach/dma.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/entry-macro.S delete mode 100644 arch/arm/mach-s5p6442/include/mach/gpio.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/hardware.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/io.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/irqs.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/map.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/memory.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/pwm-clock.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/regs-clock.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/regs-irq.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/spi-clocks.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/system.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/tick.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/timex.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/uncompress.h delete mode 100644 arch/arm/mach-s5p6442/include/mach/vmalloc.h delete mode 100644 arch/arm/mach-s5p6442/init.c delete mode 100644 arch/arm/mach-s5p6442/mach-smdk6442.c delete mode 100644 arch/arm/mach-s5p6442/setup-i2c0.c delete mode 100644 arch/arm/plat-s5p/include/plat/s5p6442.h diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt index c3094ea51aa7..658abb258cef 100644 --- a/Documentation/arm/Samsung/Overview.txt +++ b/Documentation/arm/Samsung/Overview.txt @@ -14,7 +14,6 @@ Introduction - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list - S3C64XX: S3C6400 and S3C6410 - S5P6440 - - S5P6442 - S5PC100 - S5PC110 / S5PV210 @@ -36,7 +35,6 @@ Configuration unifying all the SoCs into one kernel. s5p6440_defconfig - S5P6440 specific default configuration - s5p6442_defconfig - S5P6442 specific default configuration s5pc100_defconfig - S5PC100 specific default configuration s5pc110_defconfig - S5PC110 specific default configuration s5pv210_defconfig - S5PV210 specific default configuration diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 377a7a595b08..e81c72c38fed 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -736,16 +736,6 @@ config ARCH_S5P64X0 Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. -config ARCH_S5P6442 - bool "Samsung S5P6442" - select CPU_V6 - select GENERIC_GPIO - select HAVE_CLK - select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_WATCHDOG if WATCHDOG - help - Samsung S5P6442 CPU based systems - config ARCH_S5PC100 bool "Samsung S5PC100" select GENERIC_GPIO @@ -995,8 +985,6 @@ endif source "arch/arm/mach-s5p64x0/Kconfig" -source "arch/arm/mach-s5p6442/Kconfig" - source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" @@ -1424,7 +1412,7 @@ source kernel/Kconfig.preempt config HZ int default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ - ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4 + ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE @@ -2010,7 +1998,7 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5P64X0 && !ARCH_S5P6442 + depends on !ARCH_S5P64X0 depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c7d321a3d95d..c17304bf940b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -178,7 +178,6 @@ machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c24 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 -machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 machine-$(CONFIG_ARCH_EXYNOS4) := exynos4 diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index ea5ee4d067f3..4b71766fb21d 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -7,7 +7,7 @@ config ARM_VIC config ARM_VIC_NR int default 4 if ARCH_S5PV210 - default 3 if ARCH_S5P6442 || ARCH_S5PC100 + default 3 if ARCH_S5PC100 default 2 depends on ARM_VIC help diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig deleted file mode 100644 index 0e92a784af66..000000000000 --- a/arch/arm/configs/s5p6442_defconfig +++ /dev/null @@ -1,65 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P6442=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_MACH_SMDK6442=y -CONFIG_CPU_32v6K=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -CONFIG_FPE_NWFPE=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_ARM_UNWIND is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_S3C_UART=1 -CONFIG_CRC_CCITT=y diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig deleted file mode 100644 index 33569e4007c4..000000000000 --- a/arch/arm/mach-s5p6442/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -# arch/arm/mach-s5p6442/Kconfig -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -# Configuration options for the S5P6442 - -if ARCH_S5P6442 - -config CPU_S5P6442 - bool - select S3C_PL330_DMA - help - Enable S5P6442 CPU support - -config MACH_SMDK6442 - bool "SMDK6442" - select CPU_S5P6442 - select S3C_DEV_WDT - help - Machine support for Samsung SMDK6442 - -endif diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile deleted file mode 100644 index 90a3d8373416..000000000000 --- a/arch/arm/mach-s5p6442/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# arch/arm/mach-s5p6442/Makefile -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5P6442 system - -obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o dma.o -obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o - -# device support -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot deleted file mode 100644 index ff90aa13bd67..000000000000 --- a/arch/arm/mach-s5p6442/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y := 0x20008000 -params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c deleted file mode 100644 index fbbc7bede685..000000000000 --- a/arch/arm/mach-s5p6442/clock.c +++ /dev/null @@ -1,420 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/clock.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, -}; - -/* Possible clock sources for ARM Mux */ -static struct clk *clk_src_arm_list[] = { - [1] = &clk_mout_apll.clk, - [2] = &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clk_src_arm = { - .sources = clk_src_arm_list, - .nr_sources = ARRAY_SIZE(clk_src_arm_list), -}; - -static struct clksrc_clk clk_mout_arm = { - .clk = { - .name = "mout_arm", - .id = -1, - }, - .sources = &clk_src_arm, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, -}; - -static struct clk clk_dout_a2m = { - .name = "dout_a2m", - .id = -1, - .parent = &clk_mout_apll.clk, -}; - -/* Possible clock sources for D0 Mux */ -static struct clk *clk_src_d0_list[] = { - [1] = &clk_mout_mpll.clk, - [2] = &clk_dout_a2m, -}; - -static struct clksrc_sources clk_src_d0 = { - .sources = clk_src_d0_list, - .nr_sources = ARRAY_SIZE(clk_src_d0_list), -}; - -static struct clksrc_clk clk_mout_d0 = { - .clk = { - .name = "mout_d0", - .id = -1, - }, - .sources = &clk_src_d0, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 }, -}; - -static struct clk clk_dout_apll = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_arm.clk, -}; - -/* Possible clock sources for D0SYNC Mux */ -static struct clk *clk_src_d0sync_list[] = { - [1] = &clk_mout_d0.clk, - [2] = &clk_dout_apll, -}; - -static struct clksrc_sources clk_src_d0sync = { - .sources = clk_src_d0sync_list, - .nr_sources = ARRAY_SIZE(clk_src_d0sync_list), -}; - -static struct clksrc_clk clk_mout_d0sync = { - .clk = { - .name = "mout_d0sync", - .id = -1, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, -}; - -/* Possible clock sources for D1 Mux */ -static struct clk *clk_src_d1_list[] = { - [1] = &clk_mout_mpll.clk, - [2] = &clk_dout_a2m, -}; - -static struct clksrc_sources clk_src_d1 = { - .sources = clk_src_d1_list, - .nr_sources = ARRAY_SIZE(clk_src_d1_list), -}; - -static struct clksrc_clk clk_mout_d1 = { - .clk = { - .name = "mout_d1", - .id = -1, - }, - .sources = &clk_src_d1, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 }, -}; - -/* Possible clock sources for D1SYNC Mux */ -static struct clk *clk_src_d1sync_list[] = { - [1] = &clk_mout_d1.clk, - [2] = &clk_dout_apll, -}; - -static struct clksrc_sources clk_src_d1sync = { - .sources = clk_src_d1sync_list, - .nr_sources = ARRAY_SIZE(clk_src_d1sync_list), -}; - -static struct clksrc_clk clk_mout_d1sync = { - .clk = { - .name = "mout_d1sync", - .id = -1, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, -}; - -static struct clk clk_hclkd0 = { - .name = "hclkd0", - .id = -1, - .parent = &clk_mout_d0sync.clk, -}; - -static struct clk clk_hclkd1 = { - .name = "hclkd1", - .id = -1, - .parent = &clk_mout_d1sync.clk, -}; - -static struct clk clk_pclkd0 = { - .name = "pclkd0", - .id = -1, - .parent = &clk_hclkd0, -}; - -static struct clk clk_pclkd1 = { - .name = "pclkd1", - .id = -1, - .parent = &clk_hclkd1, -}; - -int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable); -} - -int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); -} - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "dout_a2m", - .id = -1, - .parent = &clk_mout_apll.clk, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, - }, { - .clk = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_arm.clk, - }, - .sources = &clk_src_arm, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 }, - }, { - .clk = { - .name = "hclkd1", - .id = -1, - .parent = &clk_mout_d1sync.clk, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "hclkd0", - .id = -1, - .parent = &clk_mout_d0sync.clk, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "pclkd0", - .id = -1, - .parent = &clk_hclkd0, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 }, - }, { - .clk = { - .name = "pclkd1", - .id = -1, - .parent = &clk_hclkd1, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 }, - } -}; - -/* Clock initialisation code */ -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_mpll, - &clk_mout_epll, - &clk_mout_arm, - &clk_mout_d0, - &clk_mout_d0sync, - &clk_mout_d1, - &clk_mout_d1sync, -}; - -void __init_or_cpufreq s5p6442_setup_clocks(void) -{ - struct clk *pclkd0_clk; - struct clk *pclkd1_clk; - - unsigned long xtal; - unsigned long arm; - unsigned long hclkd0 = 0; - unsigned long hclkd1 = 0; - unsigned long pclkd0 = 0; - unsigned long pclkd1 = 0; - - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal = clk_get_rate(&clk_xtal); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); - - printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld", - apll, mpll, epll); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); - - arm = clk_get_rate(&clk_dout_apll); - hclkd0 = clk_get_rate(&clk_hclkd0); - hclkd1 = clk_get_rate(&clk_hclkd1); - - pclkd0_clk = clk_get(NULL, "pclkd0"); - BUG_ON(IS_ERR(pclkd0_clk)); - - pclkd0 = clk_get_rate(pclkd0_clk); - clk_put(pclkd0_clk); - - pclkd1_clk = clk_get(NULL, "pclkd1"); - BUG_ON(IS_ERR(pclkd1_clk)); - - pclkd1 = clk_get_rate(pclkd1_clk); - clk_put(pclkd1_clk); - - printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n", - hclkd0, hclkd1, pclkd0, pclkd1); - - /* For backward compatibility */ - clk_f.rate = arm; - clk_h.rate = hclkd1; - clk_p.rate = pclkd1; - - clk_pclkd0.rate = pclkd0; - clk_pclkd1.rate = pclkd1; -} - -static struct clk init_clocks_off[] = { - { - .name = "pdma", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip0_ctrl, - .ctrlbit = (1 << 3), - }, -}; - -static struct clk init_clocks[] = { - { - .name = "systimer", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<16), - }, { - .name = "uart", - .id = 0, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<17), - }, { - .name = "uart", - .id = 1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<18), - }, { - .name = "uart", - .id = 2, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<19), - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "timers", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<23), - }, -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_mout_apll.clk, - &clk_mout_mpll.clk, - &clk_mout_epll.clk, - &clk_mout_d0.clk, - &clk_mout_d0sync.clk, - &clk_mout_d1.clk, - &clk_mout_d1sync.clk, - &clk_hclkd0, - &clk_pclkd0, - &clk_hclkd1, - &clk_pclkd1, -}; - -void __init s5p6442_register_clocks(void) -{ - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c deleted file mode 100644 index 842af86bda6d..000000000000 --- a/arch/arm/mach-s5p6442/cpu.c +++ /dev/null @@ -1,143 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/cpu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include -#include -#include - -#include -#include - -#include -#include -#include -#include - -/* Initial IO mappings */ - -static struct map_desc s5p6442_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(S5P6442_PA_SYSTIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P6442_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P6442_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P6442_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5P6442_PA_VIC2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - } -}; - -static void s5p6442_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - -/* - * s5p6442_map_io - * - * register the standard cpu IO areas - */ - -void __init s5p6442_map_io(void) -{ - iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc)); -} - -void __init s5p6442_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6442_register_clocks(); - s5p6442_setup_clocks(); -} - -void __init s5p6442_init_irq(void) -{ - /* S5P6442 supports 3 VIC */ - u32 vic[3]; - - /* VIC0, VIC1, and VIC2: some interrupt reserved */ - vic[0] = 0x7fefffff; - vic[1] = 0X7f389c81; - vic[2] = 0X1bbbcfff; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct sysdev_class s5p6442_sysclass = { - .name = "s5p6442-core", -}; - -static struct sys_device s5p6442_sysdev = { - .cls = &s5p6442_sysclass, -}; - -static int __init s5p6442_core_init(void) -{ - return sysdev_class_register(&s5p6442_sysclass); -} - -core_initcall(s5p6442_core_init); - -int __init s5p6442_init(void) -{ - printk(KERN_INFO "S5P6442: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5p6442_idle; - - return sysdev_register(&s5p6442_sysdev); -} diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c deleted file mode 100644 index 8719dc41fe32..000000000000 --- a/arch/arm/mach-s5p6442/dev-audio.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include - -#include -#include -#include - -static int s5p6442_cfg_i2s(struct platform_device *pdev) -{ - unsigned int base; - - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 1: - base = S5P6442_GPC1(0); - break; - - case 0: - base = S5P6442_GPC0(0); - break; - - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2)); - return 0; -} - -static const char *rclksrc_v35[] = { - [0] = "busclk", - [1] = "i2sclk", -}; - -static struct s3c_audio_pdata i2sv35_pdata = { - .cfg_gpio = s5p6442_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, - .src_clk = rclksrc_v35, - }, - }, -}; - -static struct resource s5p6442_iis0_resource[] = { - [0] = { - .start = S5P6442_PA_I2S0, - .end = S5P6442_PA_I2S0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_I2S0S_TX, - .end = DMACH_I2S0S_TX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_iis0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_iis0_resource), - .resource = s5p6442_iis0_resource, - .dev = { - .platform_data = &i2sv35_pdata, - }, -}; - -static const char *rclksrc_v3[] = { - [0] = "iis", - [1] = "sclk_audio", -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5p6442_cfg_i2s, - .type = { - .i2s = { - .src_clk = rclksrc_v3, - }, - }, -}; - -static struct resource s5p6442_iis1_resource[] = { - [0] = { - .start = S5P6442_PA_I2S1, - .end = S5P6442_PA_I2S1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_iis1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6442_iis1_resource), - .resource = s5p6442_iis1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev) -{ - unsigned int base; - - switch (pdev->id) { - case 0: - base = S5P6442_GPC0(0); - break; - - case 1: - base = S5P6442_GPC1(0); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3)); - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5p6442_pcm_cfg_gpio, -}; - -static struct resource s5p6442_pcm0_resource[] = { - [0] = { - .start = S5P6442_PA_PCM0, - .end = S5P6442_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_pcm0_resource), - .resource = s5p6442_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5p6442_pcm1_resource[] = { - [0] = { - .start = S5P6442_PA_PCM1, - .end = S5P6442_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6442_pcm1_resource), - .resource = s5p6442_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c deleted file mode 100644 index cce8c2470709..000000000000 --- a/arch/arm/mach-s5p6442/dev-spi.c +++ /dev/null @@ -1,121 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -static char *spi_src_clks[] = { - [S5P6442_SPI_SRCCLK_PCLK] = "pclk", - [S5P6442_SPI_SRCCLK_SCLK] = "spi_epll", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5p6442_spi_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5P6442_GPB(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s5p6442_spi0_resource[] = { - [0] = { - .start = S5P6442_PA_SPI, - .end = S5P6442_PA_SPI + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6442_spi0_pdata = { - .cfg_gpio = s5p6442_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p6442_device_spi = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_spi0_resource), - .resource = s5p6442_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6442_spi0_pdata, - }, -}; - -void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5p6442_spi0_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c deleted file mode 100644 index 7dfb13654f8a..000000000000 --- a/arch/arm/mach-s5p6442/dma.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include - -#include -#include - -#include -#include - -#include - -static u64 dma_dmamask = DMA_BIT_MASK(32); - -static struct resource s5p6442_pdma_resource[] = { - [0] = { - .start = S5P6442_PA_PDMA, - .end = S5P6442_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA, - .end = IRQ_PDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c_pl330_platdata s5p6442_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_MAX, - [7] = DMACH_MAX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_MAX, - [15] = DMACH_MAX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_MAX, - [19] = DMACH_MAX, - [20] = DMACH_PCM0_RX, - [21] = DMACH_PCM0_TX, - [22] = DMACH_PCM1_RX, - [23] = DMACH_PCM1_TX, - [24] = DMACH_MAX, - [25] = DMACH_MAX, - [26] = DMACH_MAX, - [27] = DMACH_MSM_REQ0, - [28] = DMACH_MSM_REQ1, - [29] = DMACH_MSM_REQ2, - [30] = DMACH_MSM_REQ3, - [31] = DMACH_MAX, - }, -}; - -static struct platform_device s5p6442_device_pdma = { - .name = "s3c-pl330", - .id = -1, - .num_resources = ARRAY_SIZE(s5p6442_pdma_resource), - .resource = s5p6442_pdma_resource, - .dev = { - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6442_pdma_pdata, - }, -}; - -static struct platform_device *s5p6442_dmacs[] __initdata = { - &s5p6442_device_pdma, -}; - -static int __init s5p6442_dma_init(void) -{ - platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs)); - - return 0; -} -arch_initcall(s5p6442_dma_init); diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S deleted file mode 100644 index e2213205d780..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include -#include - - .macro addruart, rp, rv - ldr \rp, = S3C_PA_UART - ldr \rv, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -#define fifo_full fifo_full_s5pv210 -#define fifo_level fifo_level_s5pv210 - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include diff --git a/arch/arm/mach-s5p6442/include/mach/dma.h b/arch/arm/mach-s5p6442/include/mach/dma.h deleted file mode 100644 index 81209eb1409b..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common S3C DMA API driver for PL330 */ -#include - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S deleted file mode 100644 index 6d574edbf1ae..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/entry-macro.S +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Low-level IRQ helper macros for the Samsung S5P6442 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =VA_VIC0 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, # S5P_IRQ_OFFSET + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic2 - addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h deleted file mode 100644 index b8715df2fdab..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/gpio.h +++ /dev/null @@ -1,123 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* GPIO bank sizes */ -#define S5P6442_GPIO_A0_NR (8) -#define S5P6442_GPIO_A1_NR (2) -#define S5P6442_GPIO_B_NR (4) -#define S5P6442_GPIO_C0_NR (5) -#define S5P6442_GPIO_C1_NR (5) -#define S5P6442_GPIO_D0_NR (2) -#define S5P6442_GPIO_D1_NR (6) -#define S5P6442_GPIO_E0_NR (8) -#define S5P6442_GPIO_E1_NR (5) -#define S5P6442_GPIO_F0_NR (8) -#define S5P6442_GPIO_F1_NR (8) -#define S5P6442_GPIO_F2_NR (8) -#define S5P6442_GPIO_F3_NR (6) -#define S5P6442_GPIO_G0_NR (7) -#define S5P6442_GPIO_G1_NR (7) -#define S5P6442_GPIO_G2_NR (7) -#define S5P6442_GPIO_H0_NR (8) -#define S5P6442_GPIO_H1_NR (8) -#define S5P6442_GPIO_H2_NR (8) -#define S5P6442_GPIO_H3_NR (8) -#define S5P6442_GPIO_J0_NR (8) -#define S5P6442_GPIO_J1_NR (6) -#define S5P6442_GPIO_J2_NR (8) -#define S5P6442_GPIO_J3_NR (8) -#define S5P6442_GPIO_J4_NR (5) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S5P6442_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5P6442_GPIO_A0_START = 0, - S5P6442_GPIO_A1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A0), - S5P6442_GPIO_B_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A1), - S5P6442_GPIO_C0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_B), - S5P6442_GPIO_C1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C0), - S5P6442_GPIO_D0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C1), - S5P6442_GPIO_D1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D0), - S5P6442_GPIO_E0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D1), - S5P6442_GPIO_E1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E0), - S5P6442_GPIO_F0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E1), - S5P6442_GPIO_F1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F0), - S5P6442_GPIO_F2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F1), - S5P6442_GPIO_F3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F2), - S5P6442_GPIO_G0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F3), - S5P6442_GPIO_G1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G0), - S5P6442_GPIO_G2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G1), - S5P6442_GPIO_H0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G2), - S5P6442_GPIO_H1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H0), - S5P6442_GPIO_H2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H1), - S5P6442_GPIO_H3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H2), - S5P6442_GPIO_J0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H3), - S5P6442_GPIO_J1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J0), - S5P6442_GPIO_J2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J1), - S5P6442_GPIO_J3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J2), - S5P6442_GPIO_J4_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J3), -}; - -/* S5P6442 GPIO number definitions. */ -#define S5P6442_GPA0(_nr) (S5P6442_GPIO_A0_START + (_nr)) -#define S5P6442_GPA1(_nr) (S5P6442_GPIO_A1_START + (_nr)) -#define S5P6442_GPB(_nr) (S5P6442_GPIO_B_START + (_nr)) -#define S5P6442_GPC0(_nr) (S5P6442_GPIO_C0_START + (_nr)) -#define S5P6442_GPC1(_nr) (S5P6442_GPIO_C1_START + (_nr)) -#define S5P6442_GPD0(_nr) (S5P6442_GPIO_D0_START + (_nr)) -#define S5P6442_GPD1(_nr) (S5P6442_GPIO_D1_START + (_nr)) -#define S5P6442_GPE0(_nr) (S5P6442_GPIO_E0_START + (_nr)) -#define S5P6442_GPE1(_nr) (S5P6442_GPIO_E1_START + (_nr)) -#define S5P6442_GPF0(_nr) (S5P6442_GPIO_F0_START + (_nr)) -#define S5P6442_GPF1(_nr) (S5P6442_GPIO_F1_START + (_nr)) -#define S5P6442_GPF2(_nr) (S5P6442_GPIO_F2_START + (_nr)) -#define S5P6442_GPF3(_nr) (S5P6442_GPIO_F3_START + (_nr)) -#define S5P6442_GPG0(_nr) (S5P6442_GPIO_G0_START + (_nr)) -#define S5P6442_GPG1(_nr) (S5P6442_GPIO_G1_START + (_nr)) -#define S5P6442_GPG2(_nr) (S5P6442_GPIO_G2_START + (_nr)) -#define S5P6442_GPH0(_nr) (S5P6442_GPIO_H0_START + (_nr)) -#define S5P6442_GPH1(_nr) (S5P6442_GPIO_H1_START + (_nr)) -#define S5P6442_GPH2(_nr) (S5P6442_GPIO_H2_START + (_nr)) -#define S5P6442_GPH3(_nr) (S5P6442_GPIO_H3_START + (_nr)) -#define S5P6442_GPJ0(_nr) (S5P6442_GPIO_J0_START + (_nr)) -#define S5P6442_GPJ1(_nr) (S5P6442_GPIO_J1_START + (_nr)) -#define S5P6442_GPJ2(_nr) (S5P6442_GPIO_J2_START + (_nr)) -#define S5P6442_GPJ3(_nr) (S5P6442_GPIO_J3_START + (_nr)) -#define S5P6442_GPJ4(_nr) (S5P6442_GPIO_J4_START + (_nr)) - -/* the end of the S5P6442 specific gpios */ -#define S5P6442_GPIO_END (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1) -#define S3C_GPIO_END S5P6442_GPIO_END - -/* define the number of gpios we need to the one after the GPJ4() range */ -#define ARCH_NR_GPIOS (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h deleted file mode 100644 index 8cd7b67b49d4..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Hardware support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h deleted file mode 100644 index 5d2195ad0b67..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/io.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/io.h - * - * Copyright 2008-2010 Ben Dooks - * - * Default IO routines for S5P6442 - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h deleted file mode 100644 index 3fbc6c3ad2da..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/irqs.h +++ /dev/null @@ -1,87 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include - -/* VIC0 */ -#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) -#define IRQ_BATF S5P_IRQ_VIC0(17) -#define IRQ_MDMA S5P_IRQ_VIC0(18) -#define IRQ_PDMA S5P_IRQ_VIC0(19) -#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) -#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) -#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) -#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) -#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) -#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) -#define IRQ_WDT S5P_IRQ_VIC0(27) -#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) -#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) -#define IRQ_GPIOINT S5P_IRQ_VIC0(30) - -/* VIC1 */ -#define IRQ_PMU S5P_IRQ_VIC1(0) -#define IRQ_ONENAND S5P_IRQ_VIC1(7) -#define IRQ_UART0 S5P_IRQ_VIC1(10) -#define IRQ_UART1 S5P_IRQ_VIC1(11) -#define IRQ_UART2 S5P_IRQ_VIC1(12) -#define IRQ_SPI0 S5P_IRQ_VIC1(15) -#define IRQ_IIC S5P_IRQ_VIC1(19) -#define IRQ_IIC1 S5P_IRQ_VIC1(20) -#define IRQ_IIC2 S5P_IRQ_VIC1(21) -#define IRQ_OTG S5P_IRQ_VIC1(24) -#define IRQ_MSM S5P_IRQ_VIC1(25) -#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) -#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) -#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) -#define IRQ_COMMRX S5P_IRQ_VIC1(29) -#define IRQ_COMMTX S5P_IRQ_VIC1(30) - -/* VIC2 */ -#define IRQ_LCD0 S5P_IRQ_VIC2(0) -#define IRQ_LCD1 S5P_IRQ_VIC2(1) -#define IRQ_LCD2 S5P_IRQ_VIC2(2) -#define IRQ_LCD3 S5P_IRQ_VIC2(3) -#define IRQ_ROTATOR S5P_IRQ_VIC2(4) -#define IRQ_FIMC0 S5P_IRQ_VIC2(5) -#define IRQ_FIMC1 S5P_IRQ_VIC2(6) -#define IRQ_FIMC2 S5P_IRQ_VIC2(7) -#define IRQ_JPEG S5P_IRQ_VIC2(8) -#define IRQ_3D S5P_IRQ_VIC2(10) -#define IRQ_Mixer S5P_IRQ_VIC2(11) -#define IRQ_MFC S5P_IRQ_VIC2(14) -#define IRQ_TVENC S5P_IRQ_VIC2(15) -#define IRQ_I2S0 S5P_IRQ_VIC2(16) -#define IRQ_I2S1 S5P_IRQ_VIC2(17) -#define IRQ_RP S5P_IRQ_VIC2(19) -#define IRQ_PCM0 S5P_IRQ_VIC2(20) -#define IRQ_PCM1 S5P_IRQ_VIC2(21) -#define IRQ_ADC S5P_IRQ_VIC2(23) -#define IRQ_PENDN S5P_IRQ_VIC2(24) -#define IRQ_KEYPAD S5P_IRQ_VIC2(25) -#define IRQ_SSS_INT S5P_IRQ_VIC2(27) -#define IRQ_SSS_HASH S5P_IRQ_VIC2(28) -#define IRQ_VIC_END S5P_IRQ_VIC2(31) - -#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) - -#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) -#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_EINT(31) + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h deleted file mode 100644 index 058dab4482a1..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ /dev/null @@ -1,76 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/map.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include -#include - -#define S5P6442_PA_SDRAM 0x20000000 - -#define S5P6442_PA_I2S0 0xC0B00000 -#define S5P6442_PA_I2S1 0xF2200000 - -#define S5P6442_PA_CHIPID 0xE0000000 - -#define S5P6442_PA_SYSCON 0xE0100000 - -#define S5P6442_PA_GPIO 0xE0200000 - -#define S5P6442_PA_VIC0 0xE4000000 -#define S5P6442_PA_VIC1 0xE4100000 -#define S5P6442_PA_VIC2 0xE4200000 - -#define S5P6442_PA_SROMC 0xE7000000 - -#define S5P6442_PA_MDMA 0xE8000000 -#define S5P6442_PA_PDMA 0xE9000000 - -#define S5P6442_PA_TIMER 0xEA000000 - -#define S5P6442_PA_SYSTIMER 0xEA100000 - -#define S5P6442_PA_WATCHDOG 0xEA200000 - -#define S5P6442_PA_UART 0xEC000000 - -#define S5P6442_PA_IIC0 0xEC100000 - -#define S5P6442_PA_SPI 0xEC300000 - -#define S5P6442_PA_PCM0 0xF2400000 -#define S5P6442_PA_PCM1 0xF2500000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_IIC S5P6442_PA_IIC0 -#define S3C_PA_WDT S5P6442_PA_WATCHDOG - -#define S5P_PA_CHIPID S5P6442_PA_CHIPID -#define S5P_PA_SDRAM S5P6442_PA_SDRAM -#define S5P_PA_SROMC S5P6442_PA_SROMC -#define S5P_PA_SYSCON S5P6442_PA_SYSCON -#define S5P_PA_TIMER S5P6442_PA_TIMER - -/* UART */ - -#define S3C_PA_UART S5P6442_PA_UART - -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) - -#define S5P_SZ_UART SZ_256 - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h deleted file mode 100644 index cfe259dded33..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/memory.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x20000000) -#define CONSISTENT_DMA_SIZE SZ_8M - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h deleted file mode 100644 index 2724b37def31..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5P6442 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h deleted file mode 100644 index 00828a336991..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/regs-clock.h +++ /dev/null @@ -1,104 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x08) -#define S5P_EPLL_LOCK S5P_CLKREG(0x10) -#define S5P_VPLL_LOCK S5P_CLKREG(0x20) - -#define S5P_APLL_CON S5P_CLKREG(0x100) -#define S5P_MPLL_CON S5P_CLKREG(0x108) -#define S5P_EPLL_CON S5P_CLKREG(0x110) -#define S5P_VPLL_CON S5P_CLKREG(0x120) - -#define S5P_CLK_SRC0 S5P_CLKREG(0x200) -#define S5P_CLK_SRC1 S5P_CLKREG(0x204) -#define S5P_CLK_SRC2 S5P_CLKREG(0x208) -#define S5P_CLK_SRC3 S5P_CLKREG(0x20C) -#define S5P_CLK_SRC4 S5P_CLKREG(0x210) -#define S5P_CLK_SRC5 S5P_CLKREG(0x214) -#define S5P_CLK_SRC6 S5P_CLKREG(0x218) - -#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280) -#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284) - -#define S5P_CLK_DIV0 S5P_CLKREG(0x300) -#define S5P_CLK_DIV1 S5P_CLKREG(0x304) -#define S5P_CLK_DIV2 S5P_CLKREG(0x308) -#define S5P_CLK_DIV3 S5P_CLKREG(0x30C) -#define S5P_CLK_DIV4 S5P_CLKREG(0x310) -#define S5P_CLK_DIV5 S5P_CLKREG(0x314) -#define S5P_CLK_DIV6 S5P_CLKREG(0x318) - -#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460) -#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C) - -/* CLK_OUT */ -#define S5P_CLK_OUT_SHIFT (12) -#define S5P_CLK_OUT_MASK (0x1F << S5P_CLK_OUT_SHIFT) -#define S5P_CLK_OUT S5P_CLKREG(0x500) - -#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000) -#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004) - -#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100) -#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104) - -#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) - -/* Register Bit definition */ -#define S5P_EPLL_EN (1<<31) -#define S5P_EPLL_MASK 0xffffffff -#define S5P_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_APLL_SHIFT (0) -#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) -#define S5P_CLKDIV0_A2M_SHIFT (4) -#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) -#define S5P_CLKDIV0_D0CLK_SHIFT (16) -#define S5P_CLKDIV0_D0CLK_MASK (0xF << S5P_CLKDIV0_D0CLK_SHIFT) -#define S5P_CLKDIV0_P0CLK_SHIFT (20) -#define S5P_CLKDIV0_P0CLK_MASK (0x7 << S5P_CLKDIV0_P0CLK_SHIFT) -#define S5P_CLKDIV0_D1CLK_SHIFT (24) -#define S5P_CLKDIV0_D1CLK_MASK (0xF << S5P_CLKDIV0_D1CLK_SHIFT) -#define S5P_CLKDIV0_P1CLK_SHIFT (28) -#define S5P_CLKDIV0_P1CLK_MASK (0x7 << S5P_CLKDIV0_P1CLK_SHIFT) - -/* Clock MUX status Registers */ -#define S5P_CLK_MUX_STAT0_APLL_SHIFT (0) -#define S5P_CLK_MUX_STAT0_APLL_MASK (0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT) -#define S5P_CLK_MUX_STAT0_MPLL_SHIFT (4) -#define S5P_CLK_MUX_STAT0_MPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_EPLL_SHIFT (8) -#define S5P_CLK_MUX_STAT0_EPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_VPLL_SHIFT (12) -#define S5P_CLK_MUX_STAT0_VPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT (16) -#define S5P_CLK_MUX_STAT0_MUXARM_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT (20) -#define S5P_CLK_MUX_STAT0_MUXD0_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT (24) -#define S5P_CLK_MUX_STAT0_MUXD1_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT) -#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT (24) -#define S5P_CLK_MUX_STAT1_D1SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT) -#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT (28) -#define S5P_CLK_MUX_STAT1_D0SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT) - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h deleted file mode 100644 index 73782b52a83b..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/regs-irq.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include -#include - -#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h deleted file mode 100644 index 7fd88205a97c..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5P6442_PLAT_SPI_CLKS_H -#define __S5P6442_PLAT_SPI_CLKS_H __FILE__ - -#define S5P6442_SPI_SRCCLK_PCLK 0 -#define S5P6442_SPI_SRCCLK_SCLK 1 - -#endif /* __S5P6442_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h deleted file mode 100644 index c30c1cc1b97e..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -#include - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h deleted file mode 100644 index e1d4cabf8297..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/tick.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/tick.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/tick.h - * - * S5P6442 - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h deleted file mode 100644 index ff8f2fcadeb7..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/timex.h - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks - * - * S5P6442 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h deleted file mode 100644 index 5ac7cbeeb987..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/uncompress.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include -#include - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h deleted file mode 100644 index 4aa55e55ac47..000000000000 --- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/vmalloc.h - * - * Copyright 2010 Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S5P6442 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c deleted file mode 100644 index 1874bdb71e1d..000000000000 --- a/arch/arm/mach-s5p6442/init.c +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/s5p6442-init.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include -#include -#include -#include - -static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = { - [0] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p6442_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c deleted file mode 100644 index eaf6b9c489ff..000000000000 --- a/arch/arm/mach-s5p6442/mach-smdk6442.c +++ /dev/null @@ -1,102 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, -}; - -static struct platform_device *smdk6442_devices[] __initdata = { - &s3c_device_i2c0, - &samsung_asoc_dma, - &s5p6442_device_iis0, - &s3c_device_wdt, -}; - -static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static void __init smdk6442_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs)); -} - -static void __init smdk6442_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - i2c_register_board_info(0, smdk6442_i2c_devs0, - ARRAY_SIZE(smdk6442_i2c_devs0)); - platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices)); -} - -MACHINE_START(SMDK6442, "SMDK6442") - /* Maintainer: Kukjin Kim */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5p6442_init_irq, - .map_io = smdk6442_map_io, - .init_machine = smdk6442_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c deleted file mode 100644 index aad85656b0cc..000000000000 --- a/arch/arm/mach-s5p6442/setup-i2c0.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/setup-i2c0.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include - -struct platform_device; /* don't need the contents */ - -#include -#include - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 849229716586..5878bd9fbad3 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) default y select ARM_VIC if !ARCH_EXYNOS4 select ARM_GIC if ARCH_EXYNOS4 diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 5cf5e721e6ca..bbc2aa7449ca 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -21,7 +21,6 @@ #include #include -#include #include #include #include @@ -30,7 +29,6 @@ /* table of supported CPUs */ static const char name_s5p6440[] = "S5P6440"; -static const char name_s5p6442[] = "S5P6442"; static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; @@ -45,14 +43,6 @@ static struct cpu_table cpu_ids[] __initdata = { .init_uarts = s5p6440_init_uarts, .init = s5p64x0_init, .name = name_s5p6440, - }, { - .idcode = 0x36442000, - .idmask = 0xfffff000, - .map_io = s5p6442_map_io, - .init_clocks = s5p6442_init_clocks, - .init_uarts = s5p6442_init_uarts, - .init = s5p6442_init, - .name = name_s5p6442, }, { .idcode = 0x36450000, .idmask = 0xfffff000, diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h deleted file mode 100644 index 7b8801349c94..000000000000 --- a/arch/arm/plat-s5p/include/plat/s5p6442.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5p6442.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p6442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5P6442 related SoCs */ - -extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5p6442_register_clocks(void); -extern void s5p6442_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6442 - -extern int s5p6442_init(void); -extern void s5p6442_init_irq(void); -extern void s5p6442_map_io(void); -extern void s5p6442_init_clocks(int xtal); - -#define s5p6442_init_uarts s5p6442_common_init_uarts - -#else -#define s5p6442_init_clocks NULL -#define s5p6442_init_uarts NULL -#define s5p6442_map_io NULL -#define s5p6442_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index cedfff51c82b..6ff205b7e4ae 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -80,7 +80,6 @@ extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; extern struct sysdev_class s5p64x0_sysclass; -extern struct sysdev_class s5p6442_sysclass; extern struct sysdev_class s5pv210_sysclass; extern struct sysdev_class exynos4_sysclass; diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S index dc6efd90e8ff..207e275362a8 100644 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ b/arch/arm/plat-samsung/include/plat/debug-macro.S @@ -11,7 +11,7 @@ #include -/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */ +/* The S5PV210/S5PC110 implementations are as belows. */ .macro fifo_level_s5pv210 rd, rx ldr \rd, [ \rx, # S3C2410_UFSTAT ] diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index f0da6b70fba4..d64adf16d533 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -110,12 +110,6 @@ extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_ahci; -extern struct platform_device s5p6442_device_pcm0; -extern struct platform_device s5p6442_device_pcm1; -extern struct platform_device s5p6442_device_iis0; -extern struct platform_device s5p6442_device_iis1; -extern struct platform_device s5p6442_device_spi; - extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 788837e99cb3..c151c5f94a87 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -194,7 +194,7 @@ #define S3C64XX_UINTSP 0x34 #define S3C64XX_UINTM 0x38 -/* Following are specific to S5PV210 and S5P6442 */ +/* Following are specific to S5PV210 */ #define S5PV210_UCON_CLKMASK (1<<10) #define S5PV210_UCON_PCLK (0<<10) #define S5PV210_UCON_UCLK (1<<10) diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index ff1a561b326e..0ffe34a21554 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -69,6 +69,5 @@ extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); -extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); #endif /* __S3C64XX_PLAT_SPI_H */ -- cgit v1.2.3 From de7a2f9f7b6f5b48d8531ff4c9c9b95cab8a8ce8 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 9 May 2011 18:11:37 +0200 Subject: dmaengine: at_hdmac: pause: no need to wait for FIFO empty With the addition of the "pause" feature, an active wait was introduced to check the "FIFO empty" event. This event was not always happening and a timout contition was needed. But, in some cases, this event depend on the peripheral connected to the channel that is paused: FIFO becomes empty if the peripheral consumes data. The timeout is pretty difficult to evaluate. Moreover, this check is not needed. In conclusion, it seems sensible to entirely remove the checking of "FIFO empty" status when pausing. Signed-off-by: Nicolas Ferre [commit msg edited for grammer] Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 2c6bc3aa3dd0..3134003eec8b 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -933,25 +933,9 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd); if (cmd == DMA_PAUSE) { - int pause_timeout = 1000; - spin_lock_bh(&atchan->lock); dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id)); - - /* wait for FIFO to be empty */ - while (!(dma_readl(atdma, CHSR) & AT_DMA_EMPT(chan_id))) { - if (pause_timeout-- > 0) { - /* the FIFO can only drain if the peripheral - * is still requesting data: - * -> timeout if it is not the case. */ - dma_writel(atdma, CHDR, AT_DMA_RES(chan_id)); - spin_unlock_bh(&atchan->lock); - return -ETIMEDOUT; - } - cpu_relax(); - } - set_bit(ATC_IS_PAUSED, &atchan->status); spin_unlock_bh(&atchan->lock); -- cgit v1.2.3 From a2de733c78fa7af51ba9670482fa7d392aa67c57 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Tue, 8 Mar 2011 14:14:00 +0100 Subject: btrfs: scrub This adds an initial implementation for scrub. It works quite straightforward. The usermode issues an ioctl for each device in the fs. For each device, it enumerates the allocated device chunks. For each chunk, the contained extents are enumerated and the data checksums fetched. The extents are read sequentially and the checksums verified. If an error occurs (checksum or EIO), a good copy is searched for. If one is found, the bad copy will be rewritten. All enumerations happen from the commit roots. During a transaction commit, the scrubs get paused and afterwards continue from the new roots. This commit is based on the series originally posted to linux-btrfs with some improvements that resulted from comments from David Sterba, Ilya Dryomov and Jan Schmidt. Signed-off-by: Arne Jansen --- fs/btrfs/Makefile | 2 +- fs/btrfs/ctree.h | 37 +- fs/btrfs/disk-io.c | 12 + fs/btrfs/file-item.c | 8 +- fs/btrfs/inode.c | 2 +- fs/btrfs/ioctl.h | 37 ++ fs/btrfs/relocation.c | 2 +- fs/btrfs/scrub.c | 1492 ++++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/transaction.c | 3 + fs/btrfs/tree-log.c | 6 +- fs/btrfs/volumes.c | 4 +- fs/btrfs/volumes.h | 6 + 12 files changed, 1600 insertions(+), 11 deletions(-) create mode 100644 fs/btrfs/scrub.c diff --git a/fs/btrfs/Makefile b/fs/btrfs/Makefile index 31610ea73aec..8fda3133c1b8 100644 --- a/fs/btrfs/Makefile +++ b/fs/btrfs/Makefile @@ -7,4 +7,4 @@ btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \ extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \ extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \ export.o tree-log.o acl.o free-space-cache.o zlib.o lzo.o \ - compression.o delayed-ref.o relocation.o + compression.o delayed-ref.o relocation.o scrub.o diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 2e61fe1b6b8c..31141ba6072d 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -33,6 +34,7 @@ #include "extent_io.h" #include "extent_map.h" #include "async-thread.h" +#include "ioctl.h" struct btrfs_trans_handle; struct btrfs_transaction; @@ -510,6 +512,12 @@ struct btrfs_extent_item_v0 { /* use full backrefs for extent pointers in the block */ #define BTRFS_BLOCK_FLAG_FULL_BACKREF (1ULL << 8) +/* + * this flag is only used internally by scrub and may be changed at any time + * it is only declared here to avoid collisions + */ +#define BTRFS_EXTENT_FLAG_SUPER (1ULL << 48) + struct btrfs_tree_block_info { struct btrfs_disk_key key; u8 level; @@ -1077,6 +1085,17 @@ struct btrfs_fs_info { void *bdev_holder; + /* private scrub information */ + struct mutex scrub_lock; + atomic_t scrubs_running; + atomic_t scrub_pause_req; + atomic_t scrubs_paused; + atomic_t scrub_cancel_req; + wait_queue_head_t scrub_pause_wait; + struct rw_semaphore scrub_super_lock; + int scrub_workers_refcnt; + struct btrfs_workers scrub_workers; + /* filesystem state */ u64 fs_state; }; @@ -2472,8 +2491,8 @@ struct btrfs_csum_item *btrfs_lookup_csum(struct btrfs_trans_handle *trans, int btrfs_csum_truncate(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_path *path, u64 isize); -int btrfs_lookup_csums_range(struct btrfs_root *root, u64 start, - u64 end, struct list_head *list); +int btrfs_lookup_csums_range(struct btrfs_root *root, u64 start, u64 end, + struct list_head *list, int search_commit); /* inode.c */ /* RHEL and EL kernels have a patch that renames PG_checked to FsMisc */ @@ -2637,4 +2656,18 @@ void btrfs_reloc_pre_snapshot(struct btrfs_trans_handle *trans, u64 *bytes_to_reserve); void btrfs_reloc_post_snapshot(struct btrfs_trans_handle *trans, struct btrfs_pending_snapshot *pending); + +/* scrub.c */ +int btrfs_scrub_dev(struct btrfs_root *root, u64 devid, u64 start, u64 end, + struct btrfs_scrub_progress *progress); +int btrfs_scrub_pause(struct btrfs_root *root); +int btrfs_scrub_pause_super(struct btrfs_root *root); +int btrfs_scrub_continue(struct btrfs_root *root); +int btrfs_scrub_continue_super(struct btrfs_root *root); +int btrfs_scrub_cancel(struct btrfs_root *root); +int btrfs_scrub_cancel_dev(struct btrfs_root *root, struct btrfs_device *dev); +int btrfs_scrub_cancel_devid(struct btrfs_root *root, u64 devid); +int btrfs_scrub_progress(struct btrfs_root *root, u64 devid, + struct btrfs_scrub_progress *progress); + #endif diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index fe5aec9b3924..e48e8095c61f 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1773,6 +1773,17 @@ struct btrfs_root *open_ctree(struct super_block *sb, INIT_LIST_HEAD(&fs_info->ordered_extents); spin_lock_init(&fs_info->ordered_extent_lock); + mutex_init(&fs_info->scrub_lock); + atomic_set(&fs_info->scrubs_running, 0); + atomic_set(&fs_info->scrub_pause_req, 0); + atomic_set(&fs_info->scrubs_paused, 0); + atomic_set(&fs_info->scrub_cancel_req, 0); + init_waitqueue_head(&fs_info->scrub_pause_wait); + init_rwsem(&fs_info->scrub_super_lock); + fs_info->scrub_workers_refcnt = 0; + btrfs_init_workers(&fs_info->scrub_workers, "scrub", + fs_info->thread_pool_size, &fs_info->generic_worker); + sb->s_blocksize = 4096; sb->s_blocksize_bits = blksize_bits(4096); sb->s_bdi = &fs_info->bdi; @@ -2599,6 +2610,7 @@ int close_ctree(struct btrfs_root *root) fs_info->closing = 1; smp_mb(); + btrfs_scrub_cancel(root); btrfs_put_block_group_cache(fs_info); /* diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index a6a9d4e8b491..39ca7c1250e7 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -266,7 +266,7 @@ int btrfs_lookup_bio_sums_dio(struct btrfs_root *root, struct inode *inode, } int btrfs_lookup_csums_range(struct btrfs_root *root, u64 start, u64 end, - struct list_head *list) + struct list_head *list, int search_commit) { struct btrfs_key key; struct btrfs_path *path; @@ -283,6 +283,12 @@ int btrfs_lookup_csums_range(struct btrfs_root *root, u64 start, u64 end, path = btrfs_alloc_path(); BUG_ON(!path); + if (search_commit) { + path->skip_locking = 1; + path->reada = 2; + path->search_commit_root = 1; + } + key.objectid = BTRFS_EXTENT_CSUM_OBJECTID; key.offset = start; key.type = BTRFS_EXTENT_CSUM_KEY; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 870869aab0b8..27142446b30a 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1007,7 +1007,7 @@ static noinline int csum_exist_in_range(struct btrfs_root *root, LIST_HEAD(list); ret = btrfs_lookup_csums_range(root->fs_info->csum_root, bytenr, - bytenr + num_bytes - 1, &list); + bytenr + num_bytes - 1, &list, 0); if (ret == 0 && list_empty(&list)) return 0; diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h index 8fb382167b13..37ac030d64b4 100644 --- a/fs/btrfs/ioctl.h +++ b/fs/btrfs/ioctl.h @@ -42,6 +42,43 @@ struct btrfs_ioctl_vol_args_v2 { char name[BTRFS_SUBVOL_NAME_MAX + 1]; }; +/* + * structure to report errors and progress to userspace, either as a + * result of a finished scrub, a canceled scrub or a progress inquiry + */ +struct btrfs_scrub_progress { + __u64 data_extents_scrubbed; /* # of data extents scrubbed */ + __u64 tree_extents_scrubbed; /* # of tree extents scrubbed */ + __u64 data_bytes_scrubbed; /* # of data bytes scrubbed */ + __u64 tree_bytes_scrubbed; /* # of tree bytes scrubbed */ + __u64 read_errors; /* # of read errors encountered (EIO) */ + __u64 csum_errors; /* # of failed csum checks */ + __u64 verify_errors; /* # of occurences, where the metadata + * of a tree block did not match the + * expected values, like generation or + * logical */ + __u64 no_csum; /* # of 4k data block for which no csum + * is present, probably the result of + * data written with nodatasum */ + __u64 csum_discards; /* # of csum for which no data was found + * in the extent tree. */ + __u64 super_errors; /* # of bad super blocks encountered */ + __u64 malloc_errors; /* # of internal kmalloc errors. These + * will likely cause an incomplete + * scrub */ + __u64 uncorrectable_errors; /* # of errors where either no intact + * copy was found or the writeback + * failed */ + __u64 corrected_errors; /* # of errors corrected */ + __u64 last_physical; /* last physical address scrubbed. In + * case a scrub was aborted, this can + * be used to restart the scrub */ + __u64 unverified_errors; /* # of occurences where a read for a + * full (64k) bio failed, but the re- + * check succeeded for each 4k piece. + * Intermittent error. */ +}; + #define BTRFS_INO_LOOKUP_PATH_MAX 4080 struct btrfs_ioctl_ino_lookup_args { __u64 treeid; diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 58250e09eb05..db1dffa9952b 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -4242,7 +4242,7 @@ int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len) disk_bytenr = file_pos + BTRFS_I(inode)->index_cnt; ret = btrfs_lookup_csums_range(root->fs_info->csum_root, disk_bytenr, - disk_bytenr + len - 1, &list); + disk_bytenr + len - 1, &list, 0); while (!list_empty(&list)) { sums = list_entry(list.next, struct btrfs_ordered_sum, list); diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c new file mode 100644 index 000000000000..70f9fa772ee9 --- /dev/null +++ b/fs/btrfs/scrub.c @@ -0,0 +1,1492 @@ +/* + * Copyright (C) 2011 STRATO. All rights reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "ctree.h" +#include "volumes.h" +#include "disk-io.h" +#include "ordered-data.h" + +/* + * This is only the first step towards a full-features scrub. It reads all + * extent and super block and verifies the checksums. In case a bad checksum + * is found or the extent cannot be read, good data will be written back if + * any can be found. + * + * Future enhancements: + * - To enhance the performance, better read-ahead strategies for the + * extent-tree can be employed. + * - In case an unrepairable extent is encountered, track which files are + * affected and report them + * - In case of a read error on files with nodatasum, map the file and read + * the extent to trigger a writeback of the good copy + * - track and record media errors, throw out bad devices + * - add a readonly mode + * - add a mode to also read unallocated space + * - make the prefetch cancellable + */ + +struct scrub_bio; +struct scrub_page; +struct scrub_dev; +struct scrub_fixup; +static void scrub_bio_end_io(struct bio *bio, int err); +static void scrub_checksum(struct btrfs_work *work); +static int scrub_checksum_data(struct scrub_dev *sdev, + struct scrub_page *spag, void *buffer); +static int scrub_checksum_tree_block(struct scrub_dev *sdev, + struct scrub_page *spag, u64 logical, + void *buffer); +static int scrub_checksum_super(struct scrub_bio *sbio, void *buffer); +static void scrub_recheck_end_io(struct bio *bio, int err); +static void scrub_fixup_worker(struct btrfs_work *work); +static void scrub_fixup(struct scrub_fixup *fixup); + +#define SCRUB_PAGES_PER_BIO 16 /* 64k per bio */ +#define SCRUB_BIOS_PER_DEV 16 /* 1 MB per device in flight */ + +struct scrub_page { + u64 flags; /* extent flags */ + u64 generation; + u64 mirror_num; + int have_csum; + u8 csum[BTRFS_CSUM_SIZE]; +}; + +struct scrub_bio { + int index; + struct scrub_dev *sdev; + struct bio *bio; + int err; + u64 logical; + u64 physical; + struct scrub_page spag[SCRUB_PAGES_PER_BIO]; + u64 count; + int next_free; + struct btrfs_work work; +}; + +struct scrub_dev { + struct scrub_bio *bios[SCRUB_BIOS_PER_DEV]; + struct btrfs_device *dev; + int first_free; + int curr; + atomic_t in_flight; + spinlock_t list_lock; + wait_queue_head_t list_wait; + u16 csum_size; + struct list_head csum_list; + atomic_t cancel_req; + /* + * statistics + */ + struct btrfs_scrub_progress stat; + spinlock_t stat_lock; +}; + +struct scrub_fixup { + struct scrub_dev *sdev; + struct bio *bio; + u64 logical; + u64 physical; + struct scrub_page spag; + struct btrfs_work work; + int err; + int recheck; +}; + +static void scrub_free_csums(struct scrub_dev *sdev) +{ + while (!list_empty(&sdev->csum_list)) { + struct btrfs_ordered_sum *sum; + sum = list_first_entry(&sdev->csum_list, + struct btrfs_ordered_sum, list); + list_del(&sum->list); + kfree(sum); + } +} + +static noinline_for_stack void scrub_free_dev(struct scrub_dev *sdev) +{ + int i; + int j; + struct page *last_page; + + if (!sdev) + return; + + for (i = 0; i < SCRUB_BIOS_PER_DEV; ++i) { + struct scrub_bio *sbio = sdev->bios[i]; + struct bio *bio; + + if (!sbio) + break; + + bio = sbio->bio; + if (bio) { + last_page = NULL; + for (j = 0; j < bio->bi_vcnt; ++j) { + if (bio->bi_io_vec[j].bv_page == last_page) + continue; + last_page = bio->bi_io_vec[j].bv_page; + __free_page(last_page); + } + bio_put(bio); + } + kfree(sbio); + } + + scrub_free_csums(sdev); + kfree(sdev); +} + +static noinline_for_stack +struct scrub_dev *scrub_setup_dev(struct btrfs_device *dev) +{ + struct scrub_dev *sdev; + int i; + int j; + int ret; + struct btrfs_fs_info *fs_info = dev->dev_root->fs_info; + + sdev = kzalloc(sizeof(*sdev), GFP_NOFS); + if (!sdev) + goto nomem; + sdev->dev = dev; + for (i = 0; i < SCRUB_BIOS_PER_DEV; ++i) { + struct bio *bio; + struct scrub_bio *sbio; + + sbio = kzalloc(sizeof(*sbio), GFP_NOFS); + if (!sbio) + goto nomem; + sdev->bios[i] = sbio; + + bio = bio_kmalloc(GFP_NOFS, SCRUB_PAGES_PER_BIO); + if (!bio) + goto nomem; + + sbio->index = i; + sbio->sdev = sdev; + sbio->bio = bio; + sbio->count = 0; + sbio->work.func = scrub_checksum; + bio->bi_private = sdev->bios[i]; + bio->bi_end_io = scrub_bio_end_io; + bio->bi_sector = 0; + bio->bi_bdev = dev->bdev; + bio->bi_size = 0; + + for (j = 0; j < SCRUB_PAGES_PER_BIO; ++j) { + struct page *page; + page = alloc_page(GFP_NOFS); + if (!page) + goto nomem; + + ret = bio_add_page(bio, page, PAGE_SIZE, 0); + if (!ret) + goto nomem; + } + WARN_ON(bio->bi_vcnt != SCRUB_PAGES_PER_BIO); + + if (i != SCRUB_BIOS_PER_DEV-1) + sdev->bios[i]->next_free = i + 1; + else + sdev->bios[i]->next_free = -1; + } + sdev->first_free = 0; + sdev->curr = -1; + atomic_set(&sdev->in_flight, 0); + atomic_set(&sdev->cancel_req, 0); + sdev->csum_size = btrfs_super_csum_size(&fs_info->super_copy); + INIT_LIST_HEAD(&sdev->csum_list); + + spin_lock_init(&sdev->list_lock); + spin_lock_init(&sdev->stat_lock); + init_waitqueue_head(&sdev->list_wait); + return sdev; + +nomem: + scrub_free_dev(sdev); + return ERR_PTR(-ENOMEM); +} + +/* + * scrub_recheck_error gets called when either verification of the page + * failed or the bio failed to read, e.g. with EIO. In the latter case, + * recheck_error gets called for every page in the bio, even though only + * one may be bad + */ +static void scrub_recheck_error(struct scrub_bio *sbio, int ix) +{ + struct scrub_dev *sdev = sbio->sdev; + struct btrfs_fs_info *fs_info = sdev->dev->dev_root->fs_info; + struct bio *bio = NULL; + struct page *page = NULL; + struct scrub_fixup *fixup = NULL; + int ret; + + /* + * while we're in here we do not want the transaction to commit. + * To prevent it, we increment scrubs_running. scrub_pause will + * have to wait until we're finished + * we can safely increment scrubs_running here, because we're + * in the context of the original bio which is still marked in_flight + */ + atomic_inc(&fs_info->scrubs_running); + + fixup = kzalloc(sizeof(*fixup), GFP_NOFS); + if (!fixup) + goto malloc_error; + + fixup->logical = sbio->logical + ix * PAGE_SIZE; + fixup->physical = sbio->physical + ix * PAGE_SIZE; + fixup->spag = sbio->spag[ix]; + fixup->sdev = sdev; + + bio = bio_alloc(GFP_NOFS, 1); + if (!bio) + goto malloc_error; + bio->bi_private = fixup; + bio->bi_size = 0; + bio->bi_bdev = sdev->dev->bdev; + fixup->bio = bio; + fixup->recheck = 0; + + page = alloc_page(GFP_NOFS); + if (!page) + goto malloc_error; + + ret = bio_add_page(bio, page, PAGE_SIZE, 0); + if (!ret) + goto malloc_error; + + if (!sbio->err) { + /* + * shorter path: just a checksum error, go ahead and correct it + */ + scrub_fixup_worker(&fixup->work); + return; + } + + /* + * an I/O-error occured for one of the blocks in the bio, not + * necessarily for this one, so first try to read it separately + */ + fixup->work.func = scrub_fixup_worker; + fixup->recheck = 1; + bio->bi_end_io = scrub_recheck_end_io; + bio->bi_sector = fixup->physical >> 9; + bio->bi_bdev = sdev->dev->bdev; + submit_bio(0, bio); + + return; + +malloc_error: + if (bio) + bio_put(bio); + if (page) + __free_page(page); + kfree(fixup); + spin_lock(&sdev->stat_lock); + ++sdev->stat.malloc_errors; + spin_unlock(&sdev->stat_lock); + atomic_dec(&fs_info->scrubs_running); + wake_up(&fs_info->scrub_pause_wait); +} + +static void scrub_recheck_end_io(struct bio *bio, int err) +{ + struct scrub_fixup *fixup = bio->bi_private; + struct btrfs_fs_info *fs_info = fixup->sdev->dev->dev_root->fs_info; + + fixup->err = err; + btrfs_queue_worker(&fs_info->scrub_workers, &fixup->work); +} + +static int scrub_fixup_check(struct scrub_fixup *fixup) +{ + int ret = 1; + struct page *page; + void *buffer; + u64 flags = fixup->spag.flags; + + page = fixup->bio->bi_io_vec[0].bv_page; + buffer = kmap_atomic(page, KM_USER0); + if (flags & BTRFS_EXTENT_FLAG_DATA) { + ret = scrub_checksum_data(fixup->sdev, + &fixup->spag, buffer); + } else if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) { + ret = scrub_checksum_tree_block(fixup->sdev, + &fixup->spag, + fixup->logical, + buffer); + } else { + WARN_ON(1); + } + kunmap_atomic(buffer, KM_USER0); + + return ret; +} + +static void scrub_fixup_worker(struct btrfs_work *work) +{ + struct scrub_fixup *fixup; + struct btrfs_fs_info *fs_info; + u64 flags; + int ret = 1; + + fixup = container_of(work, struct scrub_fixup, work); + fs_info = fixup->sdev->dev->dev_root->fs_info; + flags = fixup->spag.flags; + + if (fixup->recheck && fixup->err == 0) + ret = scrub_fixup_check(fixup); + + if (ret || fixup->err) + scrub_fixup(fixup); + + __free_page(fixup->bio->bi_io_vec[0].bv_page); + bio_put(fixup->bio); + + atomic_dec(&fs_info->scrubs_running); + wake_up(&fs_info->scrub_pause_wait); + + kfree(fixup); +} + +static void scrub_fixup_end_io(struct bio *bio, int err) +{ + complete((struct completion *)bio->bi_private); +} + +static void scrub_fixup(struct scrub_fixup *fixup) +{ + struct scrub_dev *sdev = fixup->sdev; + struct btrfs_fs_info *fs_info = sdev->dev->dev_root->fs_info; + struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree; + struct btrfs_multi_bio *multi = NULL; + struct bio *bio = fixup->bio; + u64 length; + int i; + int ret; + DECLARE_COMPLETION_ONSTACK(complete); + + if ((fixup->spag.flags & BTRFS_EXTENT_FLAG_DATA) && + (fixup->spag.have_csum == 0)) { + /* + * nodatasum, don't try to fix anything + * FIXME: we can do better, open the inode and trigger a + * writeback + */ + goto uncorrectable; + } + + length = PAGE_SIZE; + ret = btrfs_map_block(map_tree, REQ_WRITE, fixup->logical, &length, + &multi, 0); + if (ret || !multi || length < PAGE_SIZE) { + printk(KERN_ERR + "scrub_fixup: btrfs_map_block failed us for %llu\n", + (unsigned long long)fixup->logical); + WARN_ON(1); + return; + } + + if (multi->num_stripes == 1) { + /* there aren't any replicas */ + goto uncorrectable; + } + + /* + * first find a good copy + */ + for (i = 0; i < multi->num_stripes; ++i) { + if (i == fixup->spag.mirror_num) + continue; + + bio->bi_sector = multi->stripes[i].physical >> 9; + bio->bi_bdev = multi->stripes[i].dev->bdev; + bio->bi_size = PAGE_SIZE; + bio->bi_next = NULL; + bio->bi_flags |= 1 << BIO_UPTODATE; + bio->bi_comp_cpu = -1; + bio->bi_end_io = scrub_fixup_end_io; + bio->bi_private = &complete; + + submit_bio(0, bio); + + wait_for_completion(&complete); + + if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + /* I/O-error, this is not a good copy */ + continue; + + ret = scrub_fixup_check(fixup); + if (ret == 0) + break; + } + if (i == multi->num_stripes) + goto uncorrectable; + + /* + * the bio now contains good data, write it back + */ + bio->bi_sector = fixup->physical >> 9; + bio->bi_bdev = sdev->dev->bdev; + bio->bi_size = PAGE_SIZE; + bio->bi_next = NULL; + bio->bi_flags |= 1 << BIO_UPTODATE; + bio->bi_comp_cpu = -1; + bio->bi_end_io = scrub_fixup_end_io; + bio->bi_private = &complete; + + submit_bio(REQ_WRITE, bio); + + wait_for_completion(&complete); + + if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + /* I/O-error, writeback failed, give up */ + goto uncorrectable; + + kfree(multi); + spin_lock(&sdev->stat_lock); + ++sdev->stat.corrected_errors; + spin_unlock(&sdev->stat_lock); + + if (printk_ratelimit()) + printk(KERN_ERR "btrfs: fixed up at %llu\n", + (unsigned long long)fixup->logical); + return; + +uncorrectable: + kfree(multi); + spin_lock(&sdev->stat_lock); + ++sdev->stat.uncorrectable_errors; + spin_unlock(&sdev->stat_lock); + + if (printk_ratelimit()) + printk(KERN_ERR "btrfs: unable to fixup at %llu\n", + (unsigned long long)fixup->logical); +} + +static void scrub_bio_end_io(struct bio *bio, int err) +{ + struct scrub_bio *sbio = bio->bi_private; + struct scrub_dev *sdev = sbio->sdev; + struct btrfs_fs_info *fs_info = sdev->dev->dev_root->fs_info; + + sbio->err = err; + + btrfs_queue_worker(&fs_info->scrub_workers, &sbio->work); +} + +static void scrub_checksum(struct btrfs_work *work) +{ + struct scrub_bio *sbio = container_of(work, struct scrub_bio, work); + struct scrub_dev *sdev = sbio->sdev; + struct page *page; + void *buffer; + int i; + u64 flags; + u64 logical; + int ret; + + if (sbio->err) { + struct bio *bio; + struct bio *old_bio; + + for (i = 0; i < sbio->count; ++i) + scrub_recheck_error(sbio, i); + spin_lock(&sdev->stat_lock); + ++sdev->stat.read_errors; + spin_unlock(&sdev->stat_lock); + + /* + * FIXME: allocate a new bio after a media error. I haven't + * figured out how to reuse this one + */ + old_bio = sbio->bio; + bio = bio_kmalloc(GFP_NOFS, SCRUB_PAGES_PER_BIO); + if (!bio) { + /* + * alloc failed. cancel the scrub and don't requeue + * this sbio + */ + printk(KERN_ERR "btrfs scrub: allocation failure, " + "cancelling scrub\n"); + atomic_inc(&sdev->dev->dev_root->fs_info-> + scrub_cancel_req); + goto out_no_enqueue; + } + sbio->bio = bio; + bio->bi_private = sbio; + bio->bi_end_io = scrub_bio_end_io; + bio->bi_sector = 0; + bio->bi_bdev = sbio->sdev->dev->bdev; + bio->bi_size = 0; + for (i = 0; i < SCRUB_PAGES_PER_BIO; ++i) { + struct page *page; + page = old_bio->bi_io_vec[i].bv_page; + bio_add_page(bio, page, PAGE_SIZE, 0); + } + bio_put(old_bio); + goto out; + } + for (i = 0; i < sbio->count; ++i) { + page = sbio->bio->bi_io_vec[i].bv_page; + buffer = kmap_atomic(page, KM_USER0); + flags = sbio->spag[i].flags; + logical = sbio->logical + i * PAGE_SIZE; + ret = 0; + if (flags & BTRFS_EXTENT_FLAG_DATA) { + ret = scrub_checksum_data(sdev, sbio->spag + i, buffer); + } else if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) { + ret = scrub_checksum_tree_block(sdev, sbio->spag + i, + logical, buffer); + } else if (flags & BTRFS_EXTENT_FLAG_SUPER) { + BUG_ON(i); + (void)scrub_checksum_super(sbio, buffer); + } else { + WARN_ON(1); + } + kunmap_atomic(buffer, KM_USER0); + if (ret) + scrub_recheck_error(sbio, i); + } + +out: + spin_lock(&sdev->list_lock); + sbio->next_free = sdev->first_free; + sdev->first_free = sbio->index; + spin_unlock(&sdev->list_lock); +out_no_enqueue: + atomic_dec(&sdev->in_flight); + wake_up(&sdev->list_wait); +} + +static int scrub_checksum_data(struct scrub_dev *sdev, + struct scrub_page *spag, void *buffer) +{ + u8 csum[BTRFS_CSUM_SIZE]; + u32 crc = ~(u32)0; + int fail = 0; + struct btrfs_root *root = sdev->dev->dev_root; + + if (!spag->have_csum) + return 0; + + crc = btrfs_csum_data(root, buffer, crc, PAGE_SIZE); + btrfs_csum_final(crc, csum); + if (memcmp(csum, spag->csum, sdev->csum_size)) + fail = 1; + + spin_lock(&sdev->stat_lock); + ++sdev->stat.data_extents_scrubbed; + sdev->stat.data_bytes_scrubbed += PAGE_SIZE; + if (fail) + ++sdev->stat.csum_errors; + spin_unlock(&sdev->stat_lock); + + return fail; +} + +static int scrub_checksum_tree_block(struct scrub_dev *sdev, + struct scrub_page *spag, u64 logical, + void *buffer) +{ + struct btrfs_header *h; + struct btrfs_root *root = sdev->dev->dev_root; + struct btrfs_fs_info *fs_info = root->fs_info; + u8 csum[BTRFS_CSUM_SIZE]; + u32 crc = ~(u32)0; + int fail = 0; + int crc_fail = 0; + + /* + * we don't use the getter functions here, as we + * a) don't have an extent buffer and + * b) the page is already kmapped + */ + h = (struct btrfs_header *)buffer; + + if (logical != le64_to_cpu(h->bytenr)) + ++fail; + + if (spag->generation != le64_to_cpu(h->generation)) + ++fail; + + if (memcmp(h->fsid, fs_info->fsid, BTRFS_UUID_SIZE)) + ++fail; + + if (memcmp(h->chunk_tree_uuid, fs_info->chunk_tree_uuid, + BTRFS_UUID_SIZE)) + ++fail; + + crc = btrfs_csum_data(root, buffer + BTRFS_CSUM_SIZE, crc, + PAGE_SIZE - BTRFS_CSUM_SIZE); + btrfs_csum_final(crc, csum); + if (memcmp(csum, h->csum, sdev->csum_size)) + ++crc_fail; + + spin_lock(&sdev->stat_lock); + ++sdev->stat.tree_extents_scrubbed; + sdev->stat.tree_bytes_scrubbed += PAGE_SIZE; + if (crc_fail) + ++sdev->stat.csum_errors; + if (fail) + ++sdev->stat.verify_errors; + spin_unlock(&sdev->stat_lock); + + return fail || crc_fail; +} + +static int scrub_checksum_super(struct scrub_bio *sbio, void *buffer) +{ + struct btrfs_super_block *s; + u64 logical; + struct scrub_dev *sdev = sbio->sdev; + struct btrfs_root *root = sdev->dev->dev_root; + struct btrfs_fs_info *fs_info = root->fs_info; + u8 csum[BTRFS_CSUM_SIZE]; + u32 crc = ~(u32)0; + int fail = 0; + + s = (struct btrfs_super_block *)buffer; + logical = sbio->logical; + + if (logical != le64_to_cpu(s->bytenr)) + ++fail; + + if (sbio->spag[0].generation != le64_to_cpu(s->generation)) + ++fail; + + if (memcmp(s->fsid, fs_info->fsid, BTRFS_UUID_SIZE)) + ++fail; + + crc = btrfs_csum_data(root, buffer + BTRFS_CSUM_SIZE, crc, + PAGE_SIZE - BTRFS_CSUM_SIZE); + btrfs_csum_final(crc, csum); + if (memcmp(csum, s->csum, sbio->sdev->csum_size)) + ++fail; + + if (fail) { + /* + * if we find an error in a super block, we just report it. + * They will get written with the next transaction commit + * anyway + */ + spin_lock(&sdev->stat_lock); + ++sdev->stat.super_errors; + spin_unlock(&sdev->stat_lock); + } + + return fail; +} + +static int scrub_submit(struct scrub_dev *sdev) +{ + struct scrub_bio *sbio; + + if (sdev->curr == -1) + return 0; + + sbio = sdev->bios[sdev->curr]; + + sbio->bio->bi_sector = sbio->physical >> 9; + sbio->bio->bi_size = sbio->count * PAGE_SIZE; + sbio->bio->bi_next = NULL; + sbio->bio->bi_flags |= 1 << BIO_UPTODATE; + sbio->bio->bi_comp_cpu = -1; + sbio->bio->bi_bdev = sdev->dev->bdev; + sbio->err = 0; + sdev->curr = -1; + atomic_inc(&sdev->in_flight); + + submit_bio(0, sbio->bio); + + return 0; +} + +static int scrub_page(struct scrub_dev *sdev, u64 logical, u64 len, + u64 physical, u64 flags, u64 gen, u64 mirror_num, + u8 *csum, int force) +{ + struct scrub_bio *sbio; + +again: + /* + * grab a fresh bio or wait for one to become available + */ + while (sdev->curr == -1) { + spin_lock(&sdev->list_lock); + sdev->curr = sdev->first_free; + if (sdev->curr != -1) { + sdev->first_free = sdev->bios[sdev->curr]->next_free; + sdev->bios[sdev->curr]->next_free = -1; + sdev->bios[sdev->curr]->count = 0; + spin_unlock(&sdev->list_lock); + } else { + spin_unlock(&sdev->list_lock); + wait_event(sdev->list_wait, sdev->first_free != -1); + } + } + sbio = sdev->bios[sdev->curr]; + if (sbio->count == 0) { + sbio->physical = physical; + sbio->logical = logical; + } else if (sbio->physical + sbio->count * PAGE_SIZE != physical) { + scrub_submit(sdev); + goto again; + } + sbio->spag[sbio->count].flags = flags; + sbio->spag[sbio->count].generation = gen; + sbio->spag[sbio->count].have_csum = 0; + sbio->spag[sbio->count].mirror_num = mirror_num; + if (csum) { + sbio->spag[sbio->count].have_csum = 1; + memcpy(sbio->spag[sbio->count].csum, csum, sdev->csum_size); + } + ++sbio->count; + if (sbio->count == SCRUB_PAGES_PER_BIO || force) + scrub_submit(sdev); + + return 0; +} + +static int scrub_find_csum(struct scrub_dev *sdev, u64 logical, u64 len, + u8 *csum) +{ + struct btrfs_ordered_sum *sum = NULL; + int ret = 0; + unsigned long i; + unsigned long num_sectors; + u32 sectorsize = sdev->dev->dev_root->sectorsize; + + while (!list_empty(&sdev->csum_list)) { + sum = list_first_entry(&sdev->csum_list, + struct btrfs_ordered_sum, list); + if (sum->bytenr > logical) + return 0; + if (sum->bytenr + sum->len > logical) + break; + + ++sdev->stat.csum_discards; + list_del(&sum->list); + kfree(sum); + sum = NULL; + } + if (!sum) + return 0; + + num_sectors = sum->len / sectorsize; + for (i = 0; i < num_sectors; ++i) { + if (sum->sums[i].bytenr == logical) { + memcpy(csum, &sum->sums[i].sum, sdev->csum_size); + ret = 1; + break; + } + } + if (ret && i == num_sectors - 1) { + list_del(&sum->list); + kfree(sum); + } + return ret; +} + +/* scrub extent tries to collect up to 64 kB for each bio */ +static int scrub_extent(struct scrub_dev *sdev, u64 logical, u64 len, + u64 physical, u64 flags, u64 gen, u64 mirror_num) +{ + int ret; + u8 csum[BTRFS_CSUM_SIZE]; + + while (len) { + u64 l = min_t(u64, len, PAGE_SIZE); + int have_csum = 0; + + if (flags & BTRFS_EXTENT_FLAG_DATA) { + /* push csums to sbio */ + have_csum = scrub_find_csum(sdev, logical, l, csum); + if (have_csum == 0) + ++sdev->stat.no_csum; + } + ret = scrub_page(sdev, logical, l, physical, flags, gen, + mirror_num, have_csum ? csum : NULL, 0); + if (ret) + return ret; + len -= l; + logical += l; + physical += l; + } + return 0; +} + +static noinline_for_stack int scrub_stripe(struct scrub_dev *sdev, + struct map_lookup *map, int num, u64 base, u64 length) +{ + struct btrfs_path *path; + struct btrfs_fs_info *fs_info = sdev->dev->dev_root->fs_info; + struct btrfs_root *root = fs_info->extent_root; + struct btrfs_root *csum_root = fs_info->csum_root; + struct btrfs_extent_item *extent; + u64 flags; + int ret; + int slot; + int i; + u64 nstripes; + int start_stripe; + struct extent_buffer *l; + struct btrfs_key key; + u64 physical; + u64 logical; + u64 generation; + u64 mirror_num; + + u64 increment = map->stripe_len; + u64 offset; + + nstripes = length; + offset = 0; + do_div(nstripes, map->stripe_len); + if (map->type & BTRFS_BLOCK_GROUP_RAID0) { + offset = map->stripe_len * num; + increment = map->stripe_len * map->num_stripes; + mirror_num = 0; + } else if (map->type & BTRFS_BLOCK_GROUP_RAID10) { + int factor = map->num_stripes / map->sub_stripes; + offset = map->stripe_len * (num / map->sub_stripes); + increment = map->stripe_len * factor; + mirror_num = num % map->sub_stripes; + } else if (map->type & BTRFS_BLOCK_GROUP_RAID1) { + increment = map->stripe_len; + mirror_num = num % map->num_stripes; + } else if (map->type & BTRFS_BLOCK_GROUP_DUP) { + increment = map->stripe_len; + mirror_num = num % map->num_stripes; + } else { + increment = map->stripe_len; + mirror_num = 0; + } + + path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + + path->reada = 2; + path->search_commit_root = 1; + path->skip_locking = 1; + + /* + * find all extents for each stripe and just read them to get + * them into the page cache + * FIXME: we can do better. build a more intelligent prefetching + */ + logical = base + offset; + physical = map->stripes[num].physical; + ret = 0; + for (i = 0; i < nstripes; ++i) { + key.objectid = logical; + key.type = BTRFS_EXTENT_ITEM_KEY; + key.offset = (u64)0; + + ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); + if (ret < 0) + goto out; + + l = path->nodes[0]; + slot = path->slots[0]; + btrfs_item_key_to_cpu(l, &key, slot); + if (key.objectid != logical) { + ret = btrfs_previous_item(root, path, 0, + BTRFS_EXTENT_ITEM_KEY); + if (ret < 0) + goto out; + } + + while (1) { + l = path->nodes[0]; + slot = path->slots[0]; + if (slot >= btrfs_header_nritems(l)) { + ret = btrfs_next_leaf(root, path); + if (ret == 0) + continue; + if (ret < 0) + goto out; + + break; + } + btrfs_item_key_to_cpu(l, &key, slot); + + if (key.objectid >= logical + map->stripe_len) + break; + + path->slots[0]++; + } + btrfs_release_path(root, path); + logical += increment; + physical += map->stripe_len; + cond_resched(); + } + + /* + * collect all data csums for the stripe to avoid seeking during + * the scrub. This might currently (crc32) end up to be about 1MB + */ + start_stripe = 0; +again: + logical = base + offset + start_stripe * increment; + for (i = start_stripe; i < nstripes; ++i) { + ret = btrfs_lookup_csums_range(csum_root, logical, + logical + map->stripe_len - 1, + &sdev->csum_list, 1); + if (ret) + goto out; + + logical += increment; + cond_resched(); + } + /* + * now find all extents for each stripe and scrub them + */ + logical = base + offset + start_stripe * increment; + physical = map->stripes[num].physical + start_stripe * map->stripe_len; + ret = 0; + for (i = start_stripe; i < nstripes; ++i) { + /* + * canceled? + */ + if (atomic_read(&fs_info->scrub_cancel_req) || + atomic_read(&sdev->cancel_req)) { + ret = -ECANCELED; + goto out; + } + /* + * check to see if we have to pause + */ + if (atomic_read(&fs_info->scrub_pause_req)) { + /* push queued extents */ + scrub_submit(sdev); + wait_event(sdev->list_wait, + atomic_read(&sdev->in_flight) == 0); + atomic_inc(&fs_info->scrubs_paused); + wake_up(&fs_info->scrub_pause_wait); + mutex_lock(&fs_info->scrub_lock); + while (atomic_read(&fs_info->scrub_pause_req)) { + mutex_unlock(&fs_info->scrub_lock); + wait_event(fs_info->scrub_pause_wait, + atomic_read(&fs_info->scrub_pause_req) == 0); + mutex_lock(&fs_info->scrub_lock); + } + atomic_dec(&fs_info->scrubs_paused); + mutex_unlock(&fs_info->scrub_lock); + wake_up(&fs_info->scrub_pause_wait); + scrub_free_csums(sdev); + start_stripe = i; + goto again; + } + + key.objectid = logical; + key.type = BTRFS_EXTENT_ITEM_KEY; + key.offset = (u64)0; + + ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); + if (ret < 0) + goto out; + + l = path->nodes[0]; + slot = path->slots[0]; + btrfs_item_key_to_cpu(l, &key, slot); + if (key.objectid != logical) { + ret = btrfs_previous_item(root, path, 0, + BTRFS_EXTENT_ITEM_KEY); + if (ret < 0) + goto out; + } + + while (1) { + l = path->nodes[0]; + slot = path->slots[0]; + if (slot >= btrfs_header_nritems(l)) { + ret = btrfs_next_leaf(root, path); + if (ret == 0) + continue; + if (ret < 0) + goto out; + + break; + } + btrfs_item_key_to_cpu(l, &key, slot); + + if (key.objectid + key.offset <= logical) + goto next; + + if (key.objectid >= logical + map->stripe_len) + break; + + if (btrfs_key_type(&key) != BTRFS_EXTENT_ITEM_KEY) + goto next; + + extent = btrfs_item_ptr(l, slot, + struct btrfs_extent_item); + flags = btrfs_extent_flags(l, extent); + generation = btrfs_extent_generation(l, extent); + + if (key.objectid < logical && + (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK)) { + printk(KERN_ERR + "btrfs scrub: tree block %llu spanning " + "stripes, ignored. logical=%llu\n", + (unsigned long long)key.objectid, + (unsigned long long)logical); + goto next; + } + + /* + * trim extent to this stripe + */ + if (key.objectid < logical) { + key.offset -= logical - key.objectid; + key.objectid = logical; + } + if (key.objectid + key.offset > + logical + map->stripe_len) { + key.offset = logical + map->stripe_len - + key.objectid; + } + + ret = scrub_extent(sdev, key.objectid, key.offset, + key.objectid - logical + physical, + flags, generation, mirror_num); + if (ret) + goto out; + +next: + path->slots[0]++; + } + btrfs_release_path(root, path); + logical += increment; + physical += map->stripe_len; + spin_lock(&sdev->stat_lock); + sdev->stat.last_physical = physical; + spin_unlock(&sdev->stat_lock); + } + /* push queued extents */ + scrub_submit(sdev); + +out: + btrfs_free_path(path); + return ret < 0 ? ret : 0; +} + +static noinline_for_stack int scrub_chunk(struct scrub_dev *sdev, + u64 chunk_tree, u64 chunk_objectid, u64 chunk_offset, u64 length) +{ + struct btrfs_mapping_tree *map_tree = + &sdev->dev->dev_root->fs_info->mapping_tree; + struct map_lookup *map; + struct extent_map *em; + int i; + int ret = -EINVAL; + + read_lock(&map_tree->map_tree.lock); + em = lookup_extent_mapping(&map_tree->map_tree, chunk_offset, 1); + read_unlock(&map_tree->map_tree.lock); + + if (!em) + return -EINVAL; + + map = (struct map_lookup *)em->bdev; + if (em->start != chunk_offset) + goto out; + + if (em->len < length) + goto out; + + for (i = 0; i < map->num_stripes; ++i) { + if (map->stripes[i].dev == sdev->dev) { + ret = scrub_stripe(sdev, map, i, chunk_offset, length); + if (ret) + goto out; + } + } +out: + free_extent_map(em); + + return ret; +} + +static noinline_for_stack +int scrub_enumerate_chunks(struct scrub_dev *sdev, u64 start, u64 end) +{ + struct btrfs_dev_extent *dev_extent = NULL; + struct btrfs_path *path; + struct btrfs_root *root = sdev->dev->dev_root; + struct btrfs_fs_info *fs_info = root->fs_info; + u64 length; + u64 chunk_tree; + u64 chunk_objectid; + u64 chunk_offset; + int ret; + int slot; + struct extent_buffer *l; + struct btrfs_key key; + struct btrfs_key found_key; + struct btrfs_block_group_cache *cache; + + path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + + path->reada = 2; + path->search_commit_root = 1; + path->skip_locking = 1; + + key.objectid = sdev->dev->devid; + key.offset = 0ull; + key.type = BTRFS_DEV_EXTENT_KEY; + + + while (1) { + ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); + if (ret < 0) + goto out; + ret = 0; + + l = path->nodes[0]; + slot = path->slots[0]; + + btrfs_item_key_to_cpu(l, &found_key, slot); + + if (found_key.objectid != sdev->dev->devid) + break; + + if (btrfs_key_type(&key) != BTRFS_DEV_EXTENT_KEY) + break; + + if (found_key.offset >= end) + break; + + if (found_key.offset < key.offset) + break; + + dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent); + length = btrfs_dev_extent_length(l, dev_extent); + + if (found_key.offset + length <= start) { + key.offset = found_key.offset + length; + btrfs_release_path(root, path); + continue; + } + + chunk_tree = btrfs_dev_extent_chunk_tree(l, dev_extent); + chunk_objectid = btrfs_dev_extent_chunk_objectid(l, dev_extent); + chunk_offset = btrfs_dev_extent_chunk_offset(l, dev_extent); + + /* + * get a reference on the corresponding block group to prevent + * the chunk from going away while we scrub it + */ + cache = btrfs_lookup_block_group(fs_info, chunk_offset); + if (!cache) { + ret = -ENOENT; + goto out; + } + ret = scrub_chunk(sdev, chunk_tree, chunk_objectid, + chunk_offset, length); + btrfs_put_block_group(cache); + if (ret) + break; + + key.offset = found_key.offset + length; + btrfs_release_path(root, path); + } + +out: + btrfs_free_path(path); + return ret; +} + +static noinline_for_stack int scrub_supers(struct scrub_dev *sdev) +{ + int i; + u64 bytenr; + u64 gen; + int ret; + struct btrfs_device *device = sdev->dev; + struct btrfs_root *root = device->dev_root; + + gen = root->fs_info->last_trans_committed; + + for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) { + bytenr = btrfs_sb_offset(i); + if (bytenr + BTRFS_SUPER_INFO_SIZE >= device->total_bytes) + break; + + ret = scrub_page(sdev, bytenr, PAGE_SIZE, bytenr, + BTRFS_EXTENT_FLAG_SUPER, gen, i, NULL, 1); + if (ret) + return ret; + } + wait_event(sdev->list_wait, atomic_read(&sdev->in_flight) == 0); + + return 0; +} + +/* + * get a reference count on fs_info->scrub_workers. start worker if necessary + */ +static noinline_for_stack int scrub_workers_get(struct btrfs_root *root) +{ + struct btrfs_fs_info *fs_info = root->fs_info; + + mutex_lock(&fs_info->scrub_lock); + if (fs_info->scrub_workers_refcnt == 0) + btrfs_start_workers(&fs_info->scrub_workers, 1); + ++fs_info->scrub_workers_refcnt; + mutex_unlock(&fs_info->scrub_lock); + + return 0; +} + +static noinline_for_stack void scrub_workers_put(struct btrfs_root *root) +{ + struct btrfs_fs_info *fs_info = root->fs_info; + + mutex_lock(&fs_info->scrub_lock); + if (--fs_info->scrub_workers_refcnt == 0) + btrfs_stop_workers(&fs_info->scrub_workers); + WARN_ON(fs_info->scrub_workers_refcnt < 0); + mutex_unlock(&fs_info->scrub_lock); +} + + +int btrfs_scrub_dev(struct btrfs_root *root, u64 devid, u64 start, u64 end, + struct btrfs_scrub_progress *progress) +{ + struct scrub_dev *sdev; + struct btrfs_fs_info *fs_info = root->fs_info; + int ret; + struct btrfs_device *dev; + + if (root->fs_info->closing) + return -EINVAL; + + /* + * check some assumptions + */ + if (root->sectorsize != PAGE_SIZE || + root->sectorsize != root->leafsize || + root->sectorsize != root->nodesize) { + printk(KERN_ERR "btrfs_scrub: size assumptions fail\n"); + return -EINVAL; + } + + ret = scrub_workers_get(root); + if (ret) + return ret; + + mutex_lock(&root->fs_info->fs_devices->device_list_mutex); + dev = btrfs_find_device(root, devid, NULL, NULL); + if (!dev || dev->missing) { + mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); + scrub_workers_put(root); + return -ENODEV; + } + mutex_lock(&fs_info->scrub_lock); + + if (!dev->in_fs_metadata) { + mutex_unlock(&fs_info->scrub_lock); + mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); + scrub_workers_put(root); + return -ENODEV; + } + + if (dev->scrub_device) { + mutex_unlock(&fs_info->scrub_lock); + mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); + scrub_workers_put(root); + return -EINPROGRESS; + } + sdev = scrub_setup_dev(dev); + if (IS_ERR(sdev)) { + mutex_unlock(&fs_info->scrub_lock); + mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); + scrub_workers_put(root); + return PTR_ERR(sdev); + } + dev->scrub_device = sdev; + + atomic_inc(&fs_info->scrubs_running); + mutex_unlock(&fs_info->scrub_lock); + mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); + + down_read(&fs_info->scrub_super_lock); + ret = scrub_supers(sdev); + up_read(&fs_info->scrub_super_lock); + + if (!ret) + ret = scrub_enumerate_chunks(sdev, start, end); + + wait_event(sdev->list_wait, atomic_read(&sdev->in_flight) == 0); + + atomic_dec(&fs_info->scrubs_running); + wake_up(&fs_info->scrub_pause_wait); + + if (progress) + memcpy(progress, &sdev->stat, sizeof(*progress)); + + mutex_lock(&fs_info->scrub_lock); + dev->scrub_device = NULL; + mutex_unlock(&fs_info->scrub_lock); + + scrub_free_dev(sdev); + scrub_workers_put(root); + + return ret; +} + +int btrfs_scrub_pause(struct btrfs_root *root) +{ + struct btrfs_fs_info *fs_info = root->fs_info; + + mutex_lock(&fs_info->scrub_lock); + atomic_inc(&fs_info->scrub_pause_req); + while (atomic_read(&fs_info->scrubs_paused) != + atomic_read(&fs_info->scrubs_running)) { + mutex_unlock(&fs_info->scrub_lock); + wait_event(fs_info->scrub_pause_wait, + atomic_read(&fs_info->scrubs_paused) == + atomic_read(&fs_info->scrubs_running)); + mutex_lock(&fs_info->scrub_lock); + } + mutex_unlock(&fs_info->scrub_lock); + + return 0; +} + +int btrfs_scrub_continue(struct btrfs_root *root) +{ + struct btrfs_fs_info *fs_info = root->fs_info; + + atomic_dec(&fs_info->scrub_pause_req); + wake_up(&fs_info->scrub_pause_wait); + return 0; +} + +int btrfs_scrub_pause_super(struct btrfs_root *root) +{ + down_write(&root->fs_info->scrub_super_lock); + return 0; +} + +int btrfs_scrub_continue_super(struct btrfs_root *root) +{ + up_write(&root->fs_info->scrub_super_lock); + return 0; +} + +int btrfs_scrub_cancel(struct btrfs_root *root) +{ + struct btrfs_fs_info *fs_info = root->fs_info; + + mutex_lock(&fs_info->scrub_lock); + if (!atomic_read(&fs_info->scrubs_running)) { + mutex_unlock(&fs_info->scrub_lock); + return -ENOTCONN; + } + + atomic_inc(&fs_info->scrub_cancel_req); + while (atomic_read(&fs_info->scrubs_running)) { + mutex_unlock(&fs_info->scrub_lock); + wait_event(fs_info->scrub_pause_wait, + atomic_read(&fs_info->scrubs_running) == 0); + mutex_lock(&fs_info->scrub_lock); + } + atomic_dec(&fs_info->scrub_cancel_req); + mutex_unlock(&fs_info->scrub_lock); + + return 0; +} + +int btrfs_scrub_cancel_dev(struct btrfs_root *root, struct btrfs_device *dev) +{ + struct btrfs_fs_info *fs_info = root->fs_info; + struct scrub_dev *sdev; + + mutex_lock(&fs_info->scrub_lock); + sdev = dev->scrub_device; + if (!sdev) { + mutex_unlock(&fs_info->scrub_lock); + return -ENOTCONN; + } + atomic_inc(&sdev->cancel_req); + while (dev->scrub_device) { + mutex_unlock(&fs_info->scrub_lock); + wait_event(fs_info->scrub_pause_wait, + dev->scrub_device == NULL); + mutex_lock(&fs_info->scrub_lock); + } + mutex_unlock(&fs_info->scrub_lock); + + return 0; +} +int btrfs_scrub_cancel_devid(struct btrfs_root *root, u64 devid) +{ + struct btrfs_fs_info *fs_info = root->fs_info; + struct btrfs_device *dev; + int ret; + + /* + * we have to hold the device_list_mutex here so the device + * does not go away in cancel_dev. FIXME: find a better solution + */ + mutex_lock(&fs_info->fs_devices->device_list_mutex); + dev = btrfs_find_device(root, devid, NULL, NULL); + if (!dev) { + mutex_unlock(&fs_info->fs_devices->device_list_mutex); + return -ENODEV; + } + ret = btrfs_scrub_cancel_dev(root, dev); + mutex_unlock(&fs_info->fs_devices->device_list_mutex); + + return ret; +} + +int btrfs_scrub_progress(struct btrfs_root *root, u64 devid, + struct btrfs_scrub_progress *progress) +{ + struct btrfs_device *dev; + struct scrub_dev *sdev = NULL; + + mutex_lock(&root->fs_info->fs_devices->device_list_mutex); + dev = btrfs_find_device(root, devid, NULL, NULL); + if (dev) + sdev = dev->scrub_device; + if (sdev) + memcpy(progress, &sdev->stat, sizeof(*progress)); + mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); + + return dev ? (sdev ? 0 : -ENOTCONN) : -ENODEV; +} diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index c571734d5e5a..37c2302a08d4 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -1321,6 +1321,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, WARN_ON(cur_trans != trans->transaction); + btrfs_scrub_pause(root); /* btrfs_commit_tree_roots is responsible for getting the * various roots consistent with each other. Every pointer * in the tree of tree roots has to point to the most up to date @@ -1405,6 +1406,8 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, mutex_unlock(&root->fs_info->trans_mutex); + btrfs_scrub_continue(root); + if (current->journal_info == trans) current->journal_info = NULL; diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index f997ec0c1ba4..f1a0726da5f5 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -614,7 +614,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, ret = btrfs_lookup_csums_range(root->log_root, csum_start, csum_end - 1, - &ordered_sums); + &ordered_sums, 0); BUG_ON(ret); while (!list_empty(&ordered_sums)) { struct btrfs_ordered_sum *sums; @@ -2093,7 +2093,9 @@ int btrfs_sync_log(struct btrfs_trans_handle *trans, * the running transaction open, so a full commit can't hop * in and cause problems either. */ + btrfs_scrub_pause_super(root); write_ctree_super(trans, root->fs_info->tree_root, 1); + btrfs_scrub_continue_super(root); ret = 0; mutex_lock(&root->log_mutex); @@ -2689,7 +2691,7 @@ static noinline int copy_items(struct btrfs_trans_handle *trans, ret = btrfs_lookup_csums_range( log->fs_info->csum_root, ds + cs, ds + cs + cl - 1, - &ordered_sums); + &ordered_sums, 0); BUG_ON(ret); } } diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 8b9fb8c7683d..89ca8f110b6e 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -38,9 +38,6 @@ static int init_first_rw_device(struct btrfs_trans_handle *trans, struct btrfs_device *device); static int btrfs_relocate_sys_chunks(struct btrfs_root *root); -#define map_lookup_size(n) (sizeof(struct map_lookup) + \ - (sizeof(struct btrfs_bio_stripe) * (n))) - static DEFINE_MUTEX(uuid_mutex); static LIST_HEAD(fs_uuids); @@ -1334,6 +1331,7 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) goto error_undo; device->in_fs_metadata = 0; + btrfs_scrub_cancel_dev(root, device); /* * the device list mutex makes sure that we don't change diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index cc2eadaf7a27..f7c20123a1fe 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -85,6 +85,9 @@ struct btrfs_device { /* physical drive uuid (or lvm uuid) */ u8 uuid[BTRFS_UUID_SIZE]; + /* per-device scrub information */ + struct scrub_dev *scrub_device; + struct btrfs_work work; }; @@ -157,6 +160,9 @@ struct map_lookup { struct btrfs_bio_stripe stripes[]; }; +#define map_lookup_size(n) (sizeof(struct map_lookup) + \ + (sizeof(struct btrfs_bio_stripe) * (n))) + /* Used to sort the devices by max_avail(descending sort) */ int btrfs_cmp_device_free_bytes(const void *dev_info1, const void *dev_info2); -- cgit v1.2.3 From 475f63874d739d7842a56da94687f18d583ae654 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Fri, 11 Mar 2011 15:41:01 +0100 Subject: btrfs: new ioctls for scrub adds ioctls necessary to start and cancel scrubs, to get current progress and to get info about devices to be scrubbed. Note that the scrub is done per-device and that the ioctl only returns after the scrub for this devices is finished or has been canceled. Signed-off-by: Arne Jansen --- fs/btrfs/ctree.h | 2 - fs/btrfs/ioctl.c | 131 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/ioctl.h | 38 ++++++++++++++++ 3 files changed, 169 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 31141ba6072d..b7373b14e4cd 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -189,7 +189,6 @@ struct btrfs_mapping_tree { struct extent_map_tree map_tree; }; -#define BTRFS_UUID_SIZE 16 struct btrfs_dev_item { /* the internal btrfs device id */ __le64 devid; @@ -296,7 +295,6 @@ static inline unsigned long btrfs_chunk_item_size(int num_stripes) sizeof(struct btrfs_stripe) * (num_stripes - 1); } -#define BTRFS_FSID_SIZE 16 #define BTRFS_HEADER_FLAG_WRITTEN (1ULL << 0) #define BTRFS_HEADER_FLAG_RELOC (1ULL << 1) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index f580a3a5d2fc..205cd011d2f3 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1803,6 +1803,75 @@ static long btrfs_ioctl_rm_dev(struct btrfs_root *root, void __user *arg) return ret; } +static long btrfs_ioctl_fs_info(struct btrfs_root *root, void __user *arg) +{ + struct btrfs_ioctl_fs_info_args fi_args; + struct btrfs_device *device; + struct btrfs_device *next; + struct btrfs_fs_devices *fs_devices = root->fs_info->fs_devices; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + fi_args.num_devices = fs_devices->num_devices; + fi_args.max_id = 0; + memcpy(&fi_args.fsid, root->fs_info->fsid, sizeof(fi_args.fsid)); + + mutex_lock(&fs_devices->device_list_mutex); + list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) { + if (device->devid > fi_args.max_id) + fi_args.max_id = device->devid; + } + mutex_unlock(&fs_devices->device_list_mutex); + + if (copy_to_user(arg, &fi_args, sizeof(fi_args))) + return -EFAULT; + + return 0; +} + +static long btrfs_ioctl_dev_info(struct btrfs_root *root, void __user *arg) +{ + struct btrfs_ioctl_dev_info_args *di_args; + struct btrfs_device *dev; + struct btrfs_fs_devices *fs_devices = root->fs_info->fs_devices; + int ret = 0; + char *s_uuid = NULL; + char empty_uuid[BTRFS_UUID_SIZE] = {0}; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + di_args = memdup_user(arg, sizeof(*di_args)); + if (IS_ERR(di_args)) + return PTR_ERR(di_args); + + if (memcmp(empty_uuid, di_args->uuid, BTRFS_UUID_SIZE) != 0) + s_uuid = di_args->uuid; + + mutex_lock(&fs_devices->device_list_mutex); + dev = btrfs_find_device(root, di_args->devid, s_uuid, NULL); + mutex_unlock(&fs_devices->device_list_mutex); + + if (!dev) { + ret = -ENODEV; + goto out; + } + + di_args->devid = dev->devid; + di_args->bytes_used = dev->bytes_used; + di_args->total_bytes = dev->total_bytes; + memcpy(di_args->uuid, dev->uuid, sizeof(di_args->uuid)); + strncpy(di_args->path, dev->name, sizeof(di_args->path)); + +out: + if (ret == 0 && copy_to_user(arg, di_args, sizeof(*di_args))) + ret = -EFAULT; + + kfree(di_args); + return ret; +} + static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, u64 off, u64 olen, u64 destoff) { @@ -2465,6 +2534,58 @@ static noinline long btrfs_ioctl_wait_sync(struct file *file, void __user *argp) return btrfs_wait_for_commit(root, transid); } +static long btrfs_ioctl_scrub(struct btrfs_root *root, void __user *arg) +{ + int ret; + struct btrfs_ioctl_scrub_args *sa; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + sa = memdup_user(arg, sizeof(*sa)); + if (IS_ERR(sa)) + return PTR_ERR(sa); + + ret = btrfs_scrub_dev(root, sa->devid, sa->start, sa->end, + &sa->progress); + + if (copy_to_user(arg, sa, sizeof(*sa))) + ret = -EFAULT; + + kfree(sa); + return ret; +} + +static long btrfs_ioctl_scrub_cancel(struct btrfs_root *root, void __user *arg) +{ + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + return btrfs_scrub_cancel(root); +} + +static long btrfs_ioctl_scrub_progress(struct btrfs_root *root, + void __user *arg) +{ + struct btrfs_ioctl_scrub_args *sa; + int ret; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + sa = memdup_user(arg, sizeof(*sa)); + if (IS_ERR(sa)) + return PTR_ERR(sa); + + ret = btrfs_scrub_progress(root, sa->devid, &sa->progress); + + if (copy_to_user(arg, sa, sizeof(*sa))) + ret = -EFAULT; + + kfree(sa); + return ret; +} + long btrfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { @@ -2504,6 +2625,10 @@ long btrfs_ioctl(struct file *file, unsigned int return btrfs_ioctl_add_dev(root, argp); case BTRFS_IOC_RM_DEV: return btrfs_ioctl_rm_dev(root, argp); + case BTRFS_IOC_FS_INFO: + return btrfs_ioctl_fs_info(root, argp); + case BTRFS_IOC_DEV_INFO: + return btrfs_ioctl_dev_info(root, argp); case BTRFS_IOC_BALANCE: return btrfs_balance(root->fs_info->dev_root); case BTRFS_IOC_CLONE: @@ -2527,6 +2652,12 @@ long btrfs_ioctl(struct file *file, unsigned int return btrfs_ioctl_start_sync(file, argp); case BTRFS_IOC_WAIT_SYNC: return btrfs_ioctl_wait_sync(file, argp); + case BTRFS_IOC_SCRUB: + return btrfs_ioctl_scrub(root, argp); + case BTRFS_IOC_SCRUB_CANCEL: + return btrfs_ioctl_scrub_cancel(root, argp); + case BTRFS_IOC_SCRUB_PROGRESS: + return btrfs_ioctl_scrub_progress(root, argp); } return -ENOTTY; diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h index 37ac030d64b4..1a638ceeead8 100644 --- a/fs/btrfs/ioctl.h +++ b/fs/btrfs/ioctl.h @@ -32,6 +32,8 @@ struct btrfs_ioctl_vol_args { #define BTRFS_SUBVOL_CREATE_ASYNC (1ULL << 0) #define BTRFS_SUBVOL_RDONLY (1ULL << 1) +#define BTRFS_FSID_SIZE 16 +#define BTRFS_UUID_SIZE 16 #define BTRFS_SUBVOL_NAME_MAX 4039 struct btrfs_ioctl_vol_args_v2 { @@ -79,6 +81,33 @@ struct btrfs_scrub_progress { * Intermittent error. */ }; +struct btrfs_ioctl_scrub_args { + __u64 devid; /* in */ + __u64 start; /* in */ + __u64 end; /* in */ + __u64 flags; /* in */ + struct btrfs_scrub_progress progress; /* out */ + /* pad to 1k */ + __u64 unused[(1024-32-sizeof(struct btrfs_scrub_progress))/8]; +}; + +#define BTRFS_DEVICE_PATH_NAME_MAX 1024 +struct btrfs_ioctl_dev_info_args { + __u64 devid; /* in/out */ + __u8 uuid[BTRFS_UUID_SIZE]; /* in/out */ + __u64 bytes_used; /* out */ + __u64 total_bytes; /* out */ + __u64 unused[379]; /* pad to 4k */ + __u8 path[BTRFS_DEVICE_PATH_NAME_MAX]; /* out */ +}; + +struct btrfs_ioctl_fs_info_args { + __u64 max_id; /* out */ + __u64 num_devices; /* out */ + __u8 fsid[BTRFS_FSID_SIZE]; /* out */ + __u64 reserved[124]; /* pad to 1k */ +}; + #define BTRFS_INO_LOOKUP_PATH_MAX 4080 struct btrfs_ioctl_ino_lookup_args { __u64 treeid; @@ -240,4 +269,13 @@ struct btrfs_ioctl_space_args { struct btrfs_ioctl_vol_args_v2) #define BTRFS_IOC_SUBVOL_GETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 25, __u64) #define BTRFS_IOC_SUBVOL_SETFLAGS _IOW(BTRFS_IOCTL_MAGIC, 26, __u64) +#define BTRFS_IOC_SCRUB _IOWR(BTRFS_IOCTL_MAGIC, 27, \ + struct btrfs_ioctl_scrub_args) +#define BTRFS_IOC_SCRUB_CANCEL _IO(BTRFS_IOCTL_MAGIC, 28) +#define BTRFS_IOC_SCRUB_PROGRESS _IOWR(BTRFS_IOCTL_MAGIC, 29, \ + struct btrfs_ioctl_scrub_args) +#define BTRFS_IOC_DEV_INFO _IOWR(BTRFS_IOCTL_MAGIC, 30, \ + struct btrfs_ioctl_dev_info_args) +#define BTRFS_IOC_FS_INFO _IOR(BTRFS_IOCTL_MAGIC, 31, \ + struct btrfs_ioctl_fs_info_args) #endif -- cgit v1.2.3 From 96e369208e65a7d017a52361fd572df41fde8472 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Sat, 9 Apr 2011 14:27:01 +0300 Subject: btrfs scrub: make fixups sync btrfs scrub - make fixups sync, don't reuse fixup bios Fixups are already sync for csum failures, this patch makes them sync for EIO case as well. Fixups are now sharing pages with the parent sbio - instead of allocating a separate page to do a fixup we grab the page from the sbio buffer. Fixup bios are no longer reused. struct fixup is no longer needed, instead pass [sbio pointer, index]. Originally this was added to look at the possibility of sharing the code between drive swap and scrub, but it actually fixes a serious bug in scrub code where errors that could be corrected were ignored and reported as uncorrectable. btrfs scrub - restore bios properly after media errors The current code reallocates a bio after a media error. This is a temporary measure introduced in v3 after a serious problem related to bio reuse was found in v2 of scrub patchset. Basically we did not reset bv_offset and bv_len fields of the bio_vec structure. They are changed in case I/O error happens, for example, at offset 512 or 1024 into the page. Also bi_flags field wasn't properly setup before reusing the bio. Signed-off-by: Arne Jansen --- fs/btrfs/scrub.c | 287 ++++++++++++++++--------------------------------------- 1 file changed, 80 insertions(+), 207 deletions(-) diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 70f9fa772ee9..6a50801ecfa0 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -50,7 +50,6 @@ struct scrub_bio; struct scrub_page; struct scrub_dev; -struct scrub_fixup; static void scrub_bio_end_io(struct bio *bio, int err); static void scrub_checksum(struct btrfs_work *work); static int scrub_checksum_data(struct scrub_dev *sdev, @@ -59,9 +58,11 @@ static int scrub_checksum_tree_block(struct scrub_dev *sdev, struct scrub_page *spag, u64 logical, void *buffer); static int scrub_checksum_super(struct scrub_bio *sbio, void *buffer); -static void scrub_recheck_end_io(struct bio *bio, int err); -static void scrub_fixup_worker(struct btrfs_work *work); -static void scrub_fixup(struct scrub_fixup *fixup); +static int scrub_fixup_check(struct scrub_bio *sbio, int ix); +static void scrub_fixup_end_io(struct bio *bio, int err); +static int scrub_fixup_io(int rw, struct block_device *bdev, sector_t sector, + struct page *page); +static void scrub_fixup(struct scrub_bio *sbio, int ix); #define SCRUB_PAGES_PER_BIO 16 /* 64k per bio */ #define SCRUB_BIOS_PER_DEV 16 /* 1 MB per device in flight */ @@ -105,17 +106,6 @@ struct scrub_dev { spinlock_t stat_lock; }; -struct scrub_fixup { - struct scrub_dev *sdev; - struct bio *bio; - u64 logical; - u64 physical; - struct scrub_page spag; - struct btrfs_work work; - int err; - int recheck; -}; - static void scrub_free_csums(struct scrub_dev *sdev) { while (!list_empty(&sdev->csum_list)) { @@ -240,107 +230,34 @@ nomem: */ static void scrub_recheck_error(struct scrub_bio *sbio, int ix) { - struct scrub_dev *sdev = sbio->sdev; - struct btrfs_fs_info *fs_info = sdev->dev->dev_root->fs_info; - struct bio *bio = NULL; - struct page *page = NULL; - struct scrub_fixup *fixup = NULL; - int ret; - - /* - * while we're in here we do not want the transaction to commit. - * To prevent it, we increment scrubs_running. scrub_pause will - * have to wait until we're finished - * we can safely increment scrubs_running here, because we're - * in the context of the original bio which is still marked in_flight - */ - atomic_inc(&fs_info->scrubs_running); - - fixup = kzalloc(sizeof(*fixup), GFP_NOFS); - if (!fixup) - goto malloc_error; - - fixup->logical = sbio->logical + ix * PAGE_SIZE; - fixup->physical = sbio->physical + ix * PAGE_SIZE; - fixup->spag = sbio->spag[ix]; - fixup->sdev = sdev; - - bio = bio_alloc(GFP_NOFS, 1); - if (!bio) - goto malloc_error; - bio->bi_private = fixup; - bio->bi_size = 0; - bio->bi_bdev = sdev->dev->bdev; - fixup->bio = bio; - fixup->recheck = 0; - - page = alloc_page(GFP_NOFS); - if (!page) - goto malloc_error; - - ret = bio_add_page(bio, page, PAGE_SIZE, 0); - if (!ret) - goto malloc_error; - - if (!sbio->err) { - /* - * shorter path: just a checksum error, go ahead and correct it - */ - scrub_fixup_worker(&fixup->work); - return; + if (sbio->err) { + if (scrub_fixup_io(READ, sbio->sdev->dev->bdev, + (sbio->physical + ix * PAGE_SIZE) >> 9, + sbio->bio->bi_io_vec[ix].bv_page) == 0) { + if (scrub_fixup_check(sbio, ix) == 0) + return; + } } - /* - * an I/O-error occured for one of the blocks in the bio, not - * necessarily for this one, so first try to read it separately - */ - fixup->work.func = scrub_fixup_worker; - fixup->recheck = 1; - bio->bi_end_io = scrub_recheck_end_io; - bio->bi_sector = fixup->physical >> 9; - bio->bi_bdev = sdev->dev->bdev; - submit_bio(0, bio); - - return; - -malloc_error: - if (bio) - bio_put(bio); - if (page) - __free_page(page); - kfree(fixup); - spin_lock(&sdev->stat_lock); - ++sdev->stat.malloc_errors; - spin_unlock(&sdev->stat_lock); - atomic_dec(&fs_info->scrubs_running); - wake_up(&fs_info->scrub_pause_wait); + scrub_fixup(sbio, ix); } -static void scrub_recheck_end_io(struct bio *bio, int err) -{ - struct scrub_fixup *fixup = bio->bi_private; - struct btrfs_fs_info *fs_info = fixup->sdev->dev->dev_root->fs_info; - - fixup->err = err; - btrfs_queue_worker(&fs_info->scrub_workers, &fixup->work); -} - -static int scrub_fixup_check(struct scrub_fixup *fixup) +static int scrub_fixup_check(struct scrub_bio *sbio, int ix) { int ret = 1; struct page *page; void *buffer; - u64 flags = fixup->spag.flags; + u64 flags = sbio->spag[ix].flags; - page = fixup->bio->bi_io_vec[0].bv_page; + page = sbio->bio->bi_io_vec[ix].bv_page; buffer = kmap_atomic(page, KM_USER0); if (flags & BTRFS_EXTENT_FLAG_DATA) { - ret = scrub_checksum_data(fixup->sdev, - &fixup->spag, buffer); + ret = scrub_checksum_data(sbio->sdev, + sbio->spag + ix, buffer); } else if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) { - ret = scrub_checksum_tree_block(fixup->sdev, - &fixup->spag, - fixup->logical, + ret = scrub_checksum_tree_block(sbio->sdev, + sbio->spag + ix, + sbio->logical + ix * PAGE_SIZE, buffer); } else { WARN_ON(1); @@ -350,51 +267,25 @@ static int scrub_fixup_check(struct scrub_fixup *fixup) return ret; } -static void scrub_fixup_worker(struct btrfs_work *work) -{ - struct scrub_fixup *fixup; - struct btrfs_fs_info *fs_info; - u64 flags; - int ret = 1; - - fixup = container_of(work, struct scrub_fixup, work); - fs_info = fixup->sdev->dev->dev_root->fs_info; - flags = fixup->spag.flags; - - if (fixup->recheck && fixup->err == 0) - ret = scrub_fixup_check(fixup); - - if (ret || fixup->err) - scrub_fixup(fixup); - - __free_page(fixup->bio->bi_io_vec[0].bv_page); - bio_put(fixup->bio); - - atomic_dec(&fs_info->scrubs_running); - wake_up(&fs_info->scrub_pause_wait); - - kfree(fixup); -} - static void scrub_fixup_end_io(struct bio *bio, int err) { complete((struct completion *)bio->bi_private); } -static void scrub_fixup(struct scrub_fixup *fixup) +static void scrub_fixup(struct scrub_bio *sbio, int ix) { - struct scrub_dev *sdev = fixup->sdev; + struct scrub_dev *sdev = sbio->sdev; struct btrfs_fs_info *fs_info = sdev->dev->dev_root->fs_info; struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree; struct btrfs_multi_bio *multi = NULL; - struct bio *bio = fixup->bio; + u64 logical = sbio->logical + ix * PAGE_SIZE; u64 length; int i; int ret; DECLARE_COMPLETION_ONSTACK(complete); - if ((fixup->spag.flags & BTRFS_EXTENT_FLAG_DATA) && - (fixup->spag.have_csum == 0)) { + if ((sbio->spag[ix].flags & BTRFS_EXTENT_FLAG_DATA) && + (sbio->spag[ix].have_csum == 0)) { /* * nodatasum, don't try to fix anything * FIXME: we can do better, open the inode and trigger a @@ -404,71 +295,49 @@ static void scrub_fixup(struct scrub_fixup *fixup) } length = PAGE_SIZE; - ret = btrfs_map_block(map_tree, REQ_WRITE, fixup->logical, &length, + ret = btrfs_map_block(map_tree, REQ_WRITE, logical, &length, &multi, 0); if (ret || !multi || length < PAGE_SIZE) { printk(KERN_ERR "scrub_fixup: btrfs_map_block failed us for %llu\n", - (unsigned long long)fixup->logical); + (unsigned long long)logical); WARN_ON(1); return; } - if (multi->num_stripes == 1) { + if (multi->num_stripes == 1) /* there aren't any replicas */ goto uncorrectable; - } /* * first find a good copy */ for (i = 0; i < multi->num_stripes; ++i) { - if (i == fixup->spag.mirror_num) + if (i == sbio->spag[ix].mirror_num) continue; - bio->bi_sector = multi->stripes[i].physical >> 9; - bio->bi_bdev = multi->stripes[i].dev->bdev; - bio->bi_size = PAGE_SIZE; - bio->bi_next = NULL; - bio->bi_flags |= 1 << BIO_UPTODATE; - bio->bi_comp_cpu = -1; - bio->bi_end_io = scrub_fixup_end_io; - bio->bi_private = &complete; - - submit_bio(0, bio); - - wait_for_completion(&complete); - - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + if (scrub_fixup_io(READ, multi->stripes[i].dev->bdev, + multi->stripes[i].physical >> 9, + sbio->bio->bi_io_vec[ix].bv_page)) { /* I/O-error, this is not a good copy */ continue; + } - ret = scrub_fixup_check(fixup); - if (ret == 0) + if (scrub_fixup_check(sbio, ix) == 0) break; } if (i == multi->num_stripes) goto uncorrectable; /* - * the bio now contains good data, write it back + * bi_io_vec[ix].bv_page now contains good data, write it back */ - bio->bi_sector = fixup->physical >> 9; - bio->bi_bdev = sdev->dev->bdev; - bio->bi_size = PAGE_SIZE; - bio->bi_next = NULL; - bio->bi_flags |= 1 << BIO_UPTODATE; - bio->bi_comp_cpu = -1; - bio->bi_end_io = scrub_fixup_end_io; - bio->bi_private = &complete; - - submit_bio(REQ_WRITE, bio); - - wait_for_completion(&complete); - - if (!test_bit(BIO_UPTODATE, &bio->bi_flags)) + if (scrub_fixup_io(WRITE, sdev->dev->bdev, + (sbio->physical + ix * PAGE_SIZE) >> 9, + sbio->bio->bi_io_vec[ix].bv_page)) { /* I/O-error, writeback failed, give up */ goto uncorrectable; + } kfree(multi); spin_lock(&sdev->stat_lock); @@ -477,7 +346,7 @@ static void scrub_fixup(struct scrub_fixup *fixup) if (printk_ratelimit()) printk(KERN_ERR "btrfs: fixed up at %llu\n", - (unsigned long long)fixup->logical); + (unsigned long long)logical); return; uncorrectable: @@ -488,7 +357,32 @@ uncorrectable: if (printk_ratelimit()) printk(KERN_ERR "btrfs: unable to fixup at %llu\n", - (unsigned long long)fixup->logical); + (unsigned long long)logical); +} + +static int scrub_fixup_io(int rw, struct block_device *bdev, sector_t sector, + struct page *page) +{ + struct bio *bio = NULL; + int ret; + DECLARE_COMPLETION_ONSTACK(complete); + + /* we are going to wait on this IO */ + rw |= REQ_SYNC | REQ_UNPLUG; + + bio = bio_alloc(GFP_NOFS, 1); + bio->bi_bdev = bdev; + bio->bi_sector = sector; + bio_add_page(bio, page, PAGE_SIZE, 0); + bio->bi_end_io = scrub_fixup_end_io; + bio->bi_private = &complete; + submit_bio(rw, bio); + + wait_for_completion(&complete); + + ret = !test_bit(BIO_UPTODATE, &bio->bi_flags); + bio_put(bio); + return ret; } static void scrub_bio_end_io(struct bio *bio, int err) @@ -514,44 +408,24 @@ static void scrub_checksum(struct btrfs_work *work) int ret; if (sbio->err) { - struct bio *bio; - struct bio *old_bio; - for (i = 0; i < sbio->count; ++i) scrub_recheck_error(sbio, i); + + sbio->bio->bi_flags &= ~(BIO_POOL_MASK - 1); + sbio->bio->bi_flags |= 1 << BIO_UPTODATE; + sbio->bio->bi_phys_segments = 0; + sbio->bio->bi_idx = 0; + + for (i = 0; i < sbio->count; i++) { + struct bio_vec *bi; + bi = &sbio->bio->bi_io_vec[i]; + bi->bv_offset = 0; + bi->bv_len = PAGE_SIZE; + } + spin_lock(&sdev->stat_lock); ++sdev->stat.read_errors; spin_unlock(&sdev->stat_lock); - - /* - * FIXME: allocate a new bio after a media error. I haven't - * figured out how to reuse this one - */ - old_bio = sbio->bio; - bio = bio_kmalloc(GFP_NOFS, SCRUB_PAGES_PER_BIO); - if (!bio) { - /* - * alloc failed. cancel the scrub and don't requeue - * this sbio - */ - printk(KERN_ERR "btrfs scrub: allocation failure, " - "cancelling scrub\n"); - atomic_inc(&sdev->dev->dev_root->fs_info-> - scrub_cancel_req); - goto out_no_enqueue; - } - sbio->bio = bio; - bio->bi_private = sbio; - bio->bi_end_io = scrub_bio_end_io; - bio->bi_sector = 0; - bio->bi_bdev = sbio->sdev->dev->bdev; - bio->bi_size = 0; - for (i = 0; i < SCRUB_PAGES_PER_BIO; ++i) { - struct page *page; - page = old_bio->bi_io_vec[i].bv_page; - bio_add_page(bio, page, PAGE_SIZE, 0); - } - bio_put(old_bio); goto out; } for (i = 0; i < sbio->count; ++i) { @@ -581,7 +455,6 @@ out: sbio->next_free = sdev->first_free; sdev->first_free = sbio->index; spin_unlock(&sdev->list_lock); -out_no_enqueue: atomic_dec(&sdev->in_flight); wake_up(&sdev->list_wait); } -- cgit v1.2.3 From 8628764e1a5e1998a42b9713e9edea7753653d01 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Wed, 23 Mar 2011 16:34:19 +0100 Subject: btrfs: add readonly flag setting the readonly flag prevents writes in case an error is detected Signed-off-by: Arne Jansen --- fs/btrfs/ctree.h | 2 +- fs/btrfs/ioctl.c | 2 +- fs/btrfs/ioctl.h | 1 + fs/btrfs/scrub.c | 23 +++++++++++++---------- 4 files changed, 16 insertions(+), 12 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index b7373b14e4cd..ee904666b766 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2657,7 +2657,7 @@ void btrfs_reloc_post_snapshot(struct btrfs_trans_handle *trans, /* scrub.c */ int btrfs_scrub_dev(struct btrfs_root *root, u64 devid, u64 start, u64 end, - struct btrfs_scrub_progress *progress); + struct btrfs_scrub_progress *progress, int readonly); int btrfs_scrub_pause(struct btrfs_root *root); int btrfs_scrub_pause_super(struct btrfs_root *root); int btrfs_scrub_continue(struct btrfs_root *root); diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 205cd011d2f3..f0a74f014748 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2547,7 +2547,7 @@ static long btrfs_ioctl_scrub(struct btrfs_root *root, void __user *arg) return PTR_ERR(sa); ret = btrfs_scrub_dev(root, sa->devid, sa->start, sa->end, - &sa->progress); + &sa->progress, sa->flags & BTRFS_SCRUB_READONLY); if (copy_to_user(arg, sa, sizeof(*sa))) ret = -EFAULT; diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h index 1a638ceeead8..e5e0ee2cad4e 100644 --- a/fs/btrfs/ioctl.h +++ b/fs/btrfs/ioctl.h @@ -81,6 +81,7 @@ struct btrfs_scrub_progress { * Intermittent error. */ }; +#define BTRFS_SCRUB_READONLY 1 struct btrfs_ioctl_scrub_args { __u64 devid; /* in */ __u64 start; /* in */ diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 6a50801ecfa0..a31f2a9bd2e2 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -42,7 +42,6 @@ * - In case of a read error on files with nodatasum, map the file and read * the extent to trigger a writeback of the good copy * - track and record media errors, throw out bad devices - * - add a readonly mode * - add a mode to also read unallocated space * - make the prefetch cancellable */ @@ -99,6 +98,7 @@ struct scrub_dev { u16 csum_size; struct list_head csum_list; atomic_t cancel_req; + int readonly; /* * statistics */ @@ -329,14 +329,16 @@ static void scrub_fixup(struct scrub_bio *sbio, int ix) if (i == multi->num_stripes) goto uncorrectable; - /* - * bi_io_vec[ix].bv_page now contains good data, write it back - */ - if (scrub_fixup_io(WRITE, sdev->dev->bdev, - (sbio->physical + ix * PAGE_SIZE) >> 9, - sbio->bio->bi_io_vec[ix].bv_page)) { - /* I/O-error, writeback failed, give up */ - goto uncorrectable; + if (!sdev->readonly) { + /* + * bi_io_vec[ix].bv_page now contains good data, write it back + */ + if (scrub_fixup_io(WRITE, sdev->dev->bdev, + (sbio->physical + ix * PAGE_SIZE) >> 9, + sbio->bio->bi_io_vec[ix].bv_page)) { + /* I/O-error, writeback failed, give up */ + goto uncorrectable; + } } kfree(multi); @@ -1156,7 +1158,7 @@ static noinline_for_stack void scrub_workers_put(struct btrfs_root *root) int btrfs_scrub_dev(struct btrfs_root *root, u64 devid, u64 start, u64 end, - struct btrfs_scrub_progress *progress) + struct btrfs_scrub_progress *progress, int readonly) { struct scrub_dev *sdev; struct btrfs_fs_info *fs_info = root->fs_info; @@ -1209,6 +1211,7 @@ int btrfs_scrub_dev(struct btrfs_root *root, u64 devid, u64 start, u64 end, scrub_workers_put(root); return PTR_ERR(sdev); } + sdev->readonly = readonly; dev->scrub_device = sdev; atomic_inc(&fs_info->scrubs_running); -- cgit v1.2.3 From 7a36ddec1003a4e84e79f28ee714a142ed6bc529 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Fri, 6 May 2011 15:33:15 +0200 Subject: btrfs: use printk_ratelimited instead of printk_ratelimit As per printk_ratelimit comment, it should not be used. Signed-off-by: David Sterba --- fs/btrfs/disk-io.c | 21 ++++++--------------- fs/btrfs/inode.c | 13 ++++--------- 2 files changed, 10 insertions(+), 24 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index de7b4770ab17..cb9d1b8bfe74 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -29,6 +29,7 @@ #include #include #include +#include #include #include "compat.h" #include "ctree.h" @@ -254,14 +255,12 @@ static int csum_tree_block(struct btrfs_root *root, struct extent_buffer *buf, memcpy(&found, result, csum_size); read_extent_buffer(buf, &val, 0, csum_size); - if (printk_ratelimit()) { - printk(KERN_INFO "btrfs: %s checksum verify " + printk_ratelimited(KERN_INFO "btrfs: %s checksum verify " "failed on %llu wanted %X found %X " "level %d\n", root->fs_info->sb->s_id, (unsigned long long)buf->start, val, found, btrfs_header_level(buf)); - } if (result != (char *)&inline_result) kfree(result); return 1; @@ -296,13 +295,11 @@ static int verify_parent_transid(struct extent_io_tree *io_tree, ret = 0; goto out; } - if (printk_ratelimit()) { - printk("parent transid verify failed on %llu wanted %llu " + printk_ratelimited("parent transid verify failed on %llu wanted %llu " "found %llu\n", (unsigned long long)eb->start, (unsigned long long)parent_transid, (unsigned long long)btrfs_header_generation(eb)); - } ret = 1; clear_extent_buffer_uptodate(io_tree, eb, &cached_state); out: @@ -533,12 +530,10 @@ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end, found_start = btrfs_header_bytenr(eb); if (found_start != start) { - if (printk_ratelimit()) { - printk(KERN_INFO "btrfs bad tree block start " + printk_ratelimited(KERN_INFO "btrfs bad tree block start " "%llu %llu\n", (unsigned long long)found_start, (unsigned long long)eb->start); - } ret = -EIO; goto err; } @@ -550,10 +545,8 @@ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end, goto err; } if (check_tree_block_fsid(root, eb)) { - if (printk_ratelimit()) { - printk(KERN_INFO "btrfs bad fsid on block %llu\n", + printk_ratelimited(KERN_INFO "btrfs bad fsid on block %llu\n", (unsigned long long)eb->start); - } ret = -EIO; goto err; } @@ -2108,11 +2101,9 @@ static void btrfs_end_buffer_write_sync(struct buffer_head *bh, int uptodate) if (uptodate) { set_buffer_uptodate(bh); } else { - if (printk_ratelimit()) { - printk(KERN_WARNING "lost page write due to " + printk_ratelimited(KERN_WARNING "lost page write due to " "I/O error on %s\n", bdevname(bh->b_bdev, b)); - } /* note, we dont' set_buffer_write_io_error because we have * our own ways of dealing with the IO errors */ diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 5ff52b644a60..1d1017f91558 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -37,6 +37,7 @@ #include #include #include +#include #include "compat.h" #include "ctree.h" #include "disk-io.h" @@ -2004,12 +2005,10 @@ good: return 0; zeroit: - if (printk_ratelimit()) { - printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u " + printk_ratelimited(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u " "private %llu\n", page->mapping->host->i_ino, (unsigned long long)start, csum, (unsigned long long)private); - } memset(kaddr + offset, 1, end - start + 1); flush_dcache_page(page); kunmap_atomic(kaddr, KM_USER0); @@ -4243,22 +4242,18 @@ void btrfs_dirty_inode(struct inode *inode) btrfs_end_transaction(trans, root); trans = btrfs_start_transaction(root, 1); if (IS_ERR(trans)) { - if (printk_ratelimit()) { - printk(KERN_ERR "btrfs: fail to " + printk_ratelimited(KERN_ERR "btrfs: fail to " "dirty inode %lu error %ld\n", inode->i_ino, PTR_ERR(trans)); - } return; } btrfs_set_trans_block_group(trans, inode); ret = btrfs_update_inode(trans, root, inode); if (ret) { - if (printk_ratelimit()) { - printk(KERN_ERR "btrfs: fail to " + printk_ratelimited(KERN_ERR "btrfs: fail to " "dirty inode %lu error %d\n", inode->i_ino, ret); - } } } btrfs_end_transaction(trans, root); -- cgit v1.2.3 From 4ea028859bbdad34b84c9951fbb832ae10c6a96c Mon Sep 17 00:00:00 2001 From: David Sterba Date: Thu, 12 May 2011 18:13:12 +0200 Subject: btrfs: use unsigned type for single bit bitfield Signed-off-by: David Sterba --- fs/btrfs/ctree.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index e37d441617d2..343304dec6d1 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -740,12 +740,12 @@ struct btrfs_space_info { */ unsigned long reservation_progress; - int full:1; /* indicates that we cannot allocate any more + unsigned int full:1; /* indicates that we cannot allocate any more chunks for this space */ - int chunk_alloc:1; /* set if we are allocating a chunk */ + unsigned int chunk_alloc:1; /* set if we are allocating a chunk */ - int force_alloc; /* set if we need to force a chunk alloc for - this space */ + unsigned int force_alloc; /* set if we need to force a chunk + alloc for this space */ struct list_head list; -- cgit v1.2.3 From bcd53741cc2af4342ac3ff6983bddc4a1b63b9b4 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Tue, 12 Apr 2011 10:43:21 +0200 Subject: btrfs: move btrfs_cmp_device_free_bytes to super.c this function won't be used here anymore, so move it super.c where it is used for df-calculation --- fs/btrfs/super.c | 26 ++++++++++++++++++++++++++ fs/btrfs/volumes.c | 13 ------------- fs/btrfs/volumes.h | 15 --------------- 3 files changed, 26 insertions(+), 28 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 0ac712efcdf2..32fe8b33cc1c 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -913,6 +913,32 @@ static int btrfs_remount(struct super_block *sb, int *flags, char *data) return 0; } +/* Used to sort the devices by max_avail(descending sort) */ +static int btrfs_cmp_device_free_bytes(const void *dev_info1, + const void *dev_info2) +{ + if (((struct btrfs_device_info *)dev_info1)->max_avail > + ((struct btrfs_device_info *)dev_info2)->max_avail) + return -1; + else if (((struct btrfs_device_info *)dev_info1)->max_avail < + ((struct btrfs_device_info *)dev_info2)->max_avail) + return 1; + else + return 0; +} + +/* + * sort the devices by max_avail, in which max free extent size of each device + * is stored.(Descending Sort) + */ +static inline void btrfs_descending_sort_devices( + struct btrfs_device_info *devices, + size_t nr_devices) +{ + sort(devices, nr_devices, sizeof(struct btrfs_device_info), + btrfs_cmp_device_free_bytes, NULL); +} + /* * The helper to calc the free space on the devices that can be used to store * file data. diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 8b9fb8c7683d..a9f1fc23278b 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2282,19 +2282,6 @@ static noinline u64 chunk_bytes_by_type(u64 type, u64 calc_size, return calc_size * num_stripes; } -/* Used to sort the devices by max_avail(descending sort) */ -int btrfs_cmp_device_free_bytes(const void *dev_info1, const void *dev_info2) -{ - if (((struct btrfs_device_info *)dev_info1)->max_avail > - ((struct btrfs_device_info *)dev_info2)->max_avail) - return -1; - else if (((struct btrfs_device_info *)dev_info1)->max_avail < - ((struct btrfs_device_info *)dev_info2)->max_avail) - return 1; - else - return 0; -} - static int __btrfs_calc_nstripes(struct btrfs_fs_devices *fs_devices, u64 type, int *num_stripes, int *min_stripes, int *sub_stripes) diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index cc2eadaf7a27..b502f01f79ed 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -157,21 +157,6 @@ struct map_lookup { struct btrfs_bio_stripe stripes[]; }; -/* Used to sort the devices by max_avail(descending sort) */ -int btrfs_cmp_device_free_bytes(const void *dev_info1, const void *dev_info2); - -/* - * sort the devices by max_avail, in which max free extent size of each device - * is stored.(Descending Sort) - */ -static inline void btrfs_descending_sort_devices( - struct btrfs_device_info *devices, - size_t nr_devices) -{ - sort(devices, nr_devices, sizeof(struct btrfs_device_info), - btrfs_cmp_device_free_bytes, NULL); -} - int btrfs_account_dev_extents_size(struct btrfs_device *device, u64 start, u64 end, u64 *length); -- cgit v1.2.3 From a9c9bf68276c36898e23db770a65bd9b75bfac58 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Tue, 12 Apr 2011 11:01:20 +0200 Subject: btrfs: heed alloc_start currently alloc_start is disregarded if the requested chunk size is bigger than (device size - alloc_start), but smaller than the device size. The only situation where I see this could have made sense was when a chunk equal the size of the device has been requested. This was possible as the allocator failed to take alloc_start into account when calculating the request chunk size. As this gets fixed by this patch, the workaround is not necessary anymore. --- fs/btrfs/volumes.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index a9f1fc23278b..45c592a7335e 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -849,10 +849,7 @@ int find_free_dev_extent(struct btrfs_trans_handle *trans, /* we don't want to overwrite the superblock on the drive, * so we make sure to start at an offset of at least 1MB */ - search_start = 1024 * 1024; - - if (root->fs_info->alloc_start + num_bytes <= search_end) - search_start = max(root->fs_info->alloc_start, search_start); + search_start = max(root->fs_info->alloc_start, 1024ull * 1024); max_hole_start = search_start; max_hole_size = 0; -- cgit v1.2.3 From 73c5de0051533cbdf2bb656586c3eb21a475aa7d Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Tue, 12 Apr 2011 12:07:57 +0200 Subject: btrfs: quasi-round-robin for chunk allocation In a multi device setup, the chunk allocator currently always allocates chunks on the devices in the same order. This leads to a very uneven distribution, especially with RAID1 or RAID10 and an uneven number of devices. This patch always sorts the devices before allocating, and allocates the stripes on the devices with the most available space, as long as there is enough space available. In a low space situation, it first tries to maximize striping. The patch also simplifies the allocator and reduces the checks for corner cases. The simplification is done by several means. First, it defines the properties of each RAID type upfront. These properties are used afterwards instead of differentiating cases in several places. Second, the old allocator defined a minimum stripe size for each block group type, tried to find a large enough chunk, and if this fails just allocates a smaller one. This is now done in one step. The largest possible chunk (up to max_chunk_size) is searched and allocated. Because we now have only one pass, the allocation of the map (struct map_lookup) is moved down to the point where the number of stripes is already known. This way we avoid reallocation of the map. We still avoid allocating stripes that are not a multiple of STRIPE_SIZE. --- fs/btrfs/volumes.c | 481 ++++++++++++++++++++--------------------------------- fs/btrfs/volumes.h | 1 + 2 files changed, 177 insertions(+), 305 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 45c592a7335e..ab55bfc31a06 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -2268,262 +2268,204 @@ static int btrfs_add_system_chunk(struct btrfs_trans_handle *trans, return 0; } -static noinline u64 chunk_bytes_by_type(u64 type, u64 calc_size, - int num_stripes, int sub_stripes) +/* + * sort the devices in descending order by max_avail, total_avail + */ +static int btrfs_cmp_device_info(const void *a, const void *b) { - if (type & (BTRFS_BLOCK_GROUP_RAID1 | BTRFS_BLOCK_GROUP_DUP)) - return calc_size; - else if (type & BTRFS_BLOCK_GROUP_RAID10) - return calc_size * (num_stripes / sub_stripes); - else - return calc_size * num_stripes; + const struct btrfs_device_info *di_a = a; + const struct btrfs_device_info *di_b = b; + + if (di_a->max_avail > di_b->max_avail) + return -1; + if (di_a->max_avail < di_b->max_avail) + return 1; + if (di_a->total_avail > di_b->total_avail) + return -1; + if (di_a->total_avail < di_b->total_avail) + return 1; + return 0; } -static int __btrfs_calc_nstripes(struct btrfs_fs_devices *fs_devices, u64 type, - int *num_stripes, int *min_stripes, - int *sub_stripes) +static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, + struct btrfs_root *extent_root, + struct map_lookup **map_ret, + u64 *num_bytes_out, u64 *stripe_size_out, + u64 start, u64 type) { - *num_stripes = 1; - *min_stripes = 1; - *sub_stripes = 0; + struct btrfs_fs_info *info = extent_root->fs_info; + struct btrfs_fs_devices *fs_devices = info->fs_devices; + struct list_head *cur; + struct map_lookup *map = NULL; + struct extent_map_tree *em_tree; + struct extent_map *em; + struct btrfs_device_info *devices_info = NULL; + u64 total_avail; + int num_stripes; /* total number of stripes to allocate */ + int sub_stripes; /* sub_stripes info for map */ + int dev_stripes; /* stripes per dev */ + int devs_max; /* max devs to use */ + int devs_min; /* min devs needed */ + int devs_increment; /* ndevs has to be a multiple of this */ + int ncopies; /* how many copies to data has */ + int ret; + u64 max_stripe_size; + u64 max_chunk_size; + u64 stripe_size; + u64 num_bytes; + int ndevs; + int i; + int j; - if (type & (BTRFS_BLOCK_GROUP_RAID0)) { - *num_stripes = fs_devices->rw_devices; - *min_stripes = 2; - } - if (type & (BTRFS_BLOCK_GROUP_DUP)) { - *num_stripes = 2; - *min_stripes = 2; - } - if (type & (BTRFS_BLOCK_GROUP_RAID1)) { - if (fs_devices->rw_devices < 2) - return -ENOSPC; - *num_stripes = 2; - *min_stripes = 2; - } - if (type & (BTRFS_BLOCK_GROUP_RAID10)) { - *num_stripes = fs_devices->rw_devices; - if (*num_stripes < 4) - return -ENOSPC; - *num_stripes &= ~(u32)1; - *sub_stripes = 2; - *min_stripes = 4; + if ((type & BTRFS_BLOCK_GROUP_RAID1) && + (type & BTRFS_BLOCK_GROUP_DUP)) { + WARN_ON(1); + type &= ~BTRFS_BLOCK_GROUP_DUP; } - return 0; -} + if (list_empty(&fs_devices->alloc_list)) + return -ENOSPC; -static u64 __btrfs_calc_stripe_size(struct btrfs_fs_devices *fs_devices, - u64 proposed_size, u64 type, - int num_stripes, int small_stripe) -{ - int min_stripe_size = 1 * 1024 * 1024; - u64 calc_size = proposed_size; - u64 max_chunk_size = calc_size; - int ncopies = 1; + sub_stripes = 1; + dev_stripes = 1; + devs_increment = 1; + ncopies = 1; + devs_max = 0; /* 0 == as many as possible */ + devs_min = 1; - if (type & (BTRFS_BLOCK_GROUP_RAID1 | - BTRFS_BLOCK_GROUP_DUP | - BTRFS_BLOCK_GROUP_RAID10)) + /* + * define the properties of each RAID type. + * FIXME: move this to a global table and use it in all RAID + * calculation code + */ + if (type & (BTRFS_BLOCK_GROUP_DUP)) { + dev_stripes = 2; ncopies = 2; + devs_max = 1; + } else if (type & (BTRFS_BLOCK_GROUP_RAID0)) { + devs_min = 2; + } else if (type & (BTRFS_BLOCK_GROUP_RAID1)) { + devs_increment = 2; + ncopies = 2; + devs_max = 2; + devs_min = 2; + } else if (type & (BTRFS_BLOCK_GROUP_RAID10)) { + sub_stripes = 2; + devs_increment = 2; + ncopies = 2; + devs_min = 4; + } else { + devs_max = 1; + } if (type & BTRFS_BLOCK_GROUP_DATA) { - max_chunk_size = 10 * calc_size; - min_stripe_size = 64 * 1024 * 1024; + max_stripe_size = 1024 * 1024 * 1024; + max_chunk_size = 10 * max_stripe_size; } else if (type & BTRFS_BLOCK_GROUP_METADATA) { - max_chunk_size = 256 * 1024 * 1024; - min_stripe_size = 32 * 1024 * 1024; + max_stripe_size = 256 * 1024 * 1024; + max_chunk_size = max_stripe_size; } else if (type & BTRFS_BLOCK_GROUP_SYSTEM) { - calc_size = 8 * 1024 * 1024; - max_chunk_size = calc_size * 2; - min_stripe_size = 1 * 1024 * 1024; + max_stripe_size = 8 * 1024 * 1024; + max_chunk_size = 2 * max_stripe_size; + } else { + printk(KERN_ERR "btrfs: invalid chunk type 0x%llx requested\n", + type); + BUG_ON(1); } /* we don't want a chunk larger than 10% of writeable space */ max_chunk_size = min(div_factor(fs_devices->total_rw_bytes, 1), max_chunk_size); - if (calc_size * num_stripes > max_chunk_size * ncopies) { - calc_size = max_chunk_size * ncopies; - do_div(calc_size, num_stripes); - do_div(calc_size, BTRFS_STRIPE_LEN); - calc_size *= BTRFS_STRIPE_LEN; - } + devices_info = kzalloc(sizeof(*devices_info) * fs_devices->rw_devices, + GFP_NOFS); + if (!devices_info) + return -ENOMEM; - /* we don't want tiny stripes */ - if (!small_stripe) - calc_size = max_t(u64, min_stripe_size, calc_size); + cur = fs_devices->alloc_list.next; /* - * we're about to do_div by the BTRFS_STRIPE_LEN so lets make sure - * we end up with something bigger than a stripe + * in the first pass through the devices list, we gather information + * about the available holes on each device. */ - calc_size = max_t(u64, calc_size, BTRFS_STRIPE_LEN); - - do_div(calc_size, BTRFS_STRIPE_LEN); - calc_size *= BTRFS_STRIPE_LEN; - - return calc_size; -} + ndevs = 0; + while (cur != &fs_devices->alloc_list) { + struct btrfs_device *device; + u64 max_avail; + u64 dev_offset; -static struct map_lookup *__shrink_map_lookup_stripes(struct map_lookup *map, - int num_stripes) -{ - struct map_lookup *new; - size_t len = map_lookup_size(num_stripes); - - BUG_ON(map->num_stripes < num_stripes); - - if (map->num_stripes == num_stripes) - return map; - - new = kmalloc(len, GFP_NOFS); - if (!new) { - /* just change map->num_stripes */ - map->num_stripes = num_stripes; - return map; - } - - memcpy(new, map, len); - new->num_stripes = num_stripes; - kfree(map); - return new; -} - -/* - * helper to allocate device space from btrfs_device_info, in which we stored - * max free space information of every device. It is used when we can not - * allocate chunks by default size. - * - * By this helper, we can allocate a new chunk as larger as possible. - */ -static int __btrfs_alloc_tiny_space(struct btrfs_trans_handle *trans, - struct btrfs_fs_devices *fs_devices, - struct btrfs_device_info *devices, - int nr_device, u64 type, - struct map_lookup **map_lookup, - int min_stripes, u64 *stripe_size) -{ - int i, index, sort_again = 0; - int min_devices = min_stripes; - u64 max_avail, min_free; - struct map_lookup *map = *map_lookup; - int ret; + device = list_entry(cur, struct btrfs_device, dev_alloc_list); - if (nr_device < min_stripes) - return -ENOSPC; + cur = cur->next; - btrfs_descending_sort_devices(devices, nr_device); + if (!device->writeable) { + printk(KERN_ERR + "btrfs: read-only device in alloc_list\n"); + WARN_ON(1); + continue; + } - max_avail = devices[0].max_avail; - if (!max_avail) - return -ENOSPC; + if (!device->in_fs_metadata) + continue; - for (i = 0; i < nr_device; i++) { - /* - * if dev_offset = 0, it means the free space of this device - * is less than what we need, and we didn't search max avail - * extent on this device, so do it now. + if (device->total_bytes > device->bytes_used) + total_avail = device->total_bytes - device->bytes_used; + else + total_avail = 0; + /* avail is off by max(alloc_start, 1MB), but that is the same + * for all devices, so it doesn't hurt the sorting later on */ - if (!devices[i].dev_offset) { - ret = find_free_dev_extent(trans, devices[i].dev, - max_avail, - &devices[i].dev_offset, - &devices[i].max_avail); - if (ret != 0 && ret != -ENOSPC) - return ret; - sort_again = 1; - } - } - /* we update the max avail free extent of each devices, sort again */ - if (sort_again) - btrfs_descending_sort_devices(devices, nr_device); - - if (type & BTRFS_BLOCK_GROUP_DUP) - min_devices = 1; + ret = find_free_dev_extent(trans, device, + max_stripe_size * dev_stripes, + &dev_offset, &max_avail); + if (ret && ret != -ENOSPC) + goto error; - if (!devices[min_devices - 1].max_avail) - return -ENOSPC; + if (ret == 0) + max_avail = max_stripe_size * dev_stripes; - max_avail = devices[min_devices - 1].max_avail; - if (type & BTRFS_BLOCK_GROUP_DUP) - do_div(max_avail, 2); + if (max_avail < BTRFS_STRIPE_LEN * dev_stripes) + continue; - max_avail = __btrfs_calc_stripe_size(fs_devices, max_avail, type, - min_stripes, 1); - if (type & BTRFS_BLOCK_GROUP_DUP) - min_free = max_avail * 2; - else - min_free = max_avail; + devices_info[ndevs].dev_offset = dev_offset; + devices_info[ndevs].max_avail = max_avail; + devices_info[ndevs].total_avail = total_avail; + devices_info[ndevs].dev = device; + ++ndevs; + } - if (min_free > devices[min_devices - 1].max_avail) - return -ENOSPC; + /* + * now sort the devices by hole size / available space + */ + sort(devices_info, ndevs, sizeof(struct btrfs_device_info), + btrfs_cmp_device_info, NULL); - map = __shrink_map_lookup_stripes(map, min_stripes); - *stripe_size = max_avail; + /* round down to number of usable stripes */ + ndevs -= ndevs % devs_increment; - index = 0; - for (i = 0; i < min_stripes; i++) { - map->stripes[i].dev = devices[index].dev; - map->stripes[i].physical = devices[index].dev_offset; - if (type & BTRFS_BLOCK_GROUP_DUP) { - i++; - map->stripes[i].dev = devices[index].dev; - map->stripes[i].physical = devices[index].dev_offset + - max_avail; - } - index++; + if (ndevs < devs_increment * sub_stripes || ndevs < devs_min) { + ret = -ENOSPC; + goto error; } - *map_lookup = map; - - return 0; -} -static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, - struct btrfs_root *extent_root, - struct map_lookup **map_ret, - u64 *num_bytes, u64 *stripe_size, - u64 start, u64 type) -{ - struct btrfs_fs_info *info = extent_root->fs_info; - struct btrfs_device *device = NULL; - struct btrfs_fs_devices *fs_devices = info->fs_devices; - struct list_head *cur; - struct map_lookup *map; - struct extent_map_tree *em_tree; - struct extent_map *em; - struct btrfs_device_info *devices_info; - struct list_head private_devs; - u64 calc_size = 1024 * 1024 * 1024; - u64 min_free; - u64 avail; - u64 dev_offset; - int num_stripes; - int min_stripes; - int sub_stripes; - int min_devices; /* the min number of devices we need */ - int i; - int ret; - int index; + if (devs_max && ndevs > devs_max) + ndevs = devs_max; + /* + * the primary goal is to maximize the number of stripes, so use as many + * devices as possible, even if the stripes are not maximum sized. + */ + stripe_size = devices_info[ndevs-1].max_avail; + num_stripes = ndevs * dev_stripes; - if ((type & BTRFS_BLOCK_GROUP_RAID1) && - (type & BTRFS_BLOCK_GROUP_DUP)) { - WARN_ON(1); - type &= ~BTRFS_BLOCK_GROUP_DUP; + if (stripe_size * num_stripes > max_chunk_size * ncopies) { + stripe_size = max_chunk_size * ncopies; + do_div(stripe_size, num_stripes); } - if (list_empty(&fs_devices->alloc_list)) - return -ENOSPC; - - ret = __btrfs_calc_nstripes(fs_devices, type, &num_stripes, - &min_stripes, &sub_stripes); - if (ret) - return ret; - devices_info = kzalloc(sizeof(*devices_info) * fs_devices->rw_devices, - GFP_NOFS); - if (!devices_info) - return -ENOMEM; + do_div(stripe_size, dev_stripes); + do_div(stripe_size, BTRFS_STRIPE_LEN); + stripe_size *= BTRFS_STRIPE_LEN; map = kmalloc(map_lookup_size(num_stripes), GFP_NOFS); if (!map) { @@ -2532,85 +2474,12 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, } map->num_stripes = num_stripes; - cur = fs_devices->alloc_list.next; - index = 0; - i = 0; - - calc_size = __btrfs_calc_stripe_size(fs_devices, calc_size, type, - num_stripes, 0); - - if (type & BTRFS_BLOCK_GROUP_DUP) { - min_free = calc_size * 2; - min_devices = 1; - } else { - min_free = calc_size; - min_devices = min_stripes; - } - - INIT_LIST_HEAD(&private_devs); - while (index < num_stripes) { - device = list_entry(cur, struct btrfs_device, dev_alloc_list); - BUG_ON(!device->writeable); - if (device->total_bytes > device->bytes_used) - avail = device->total_bytes - device->bytes_used; - else - avail = 0; - cur = cur->next; - - if (device->in_fs_metadata && avail >= min_free) { - ret = find_free_dev_extent(trans, device, min_free, - &devices_info[i].dev_offset, - &devices_info[i].max_avail); - if (ret == 0) { - list_move_tail(&device->dev_alloc_list, - &private_devs); - map->stripes[index].dev = device; - map->stripes[index].physical = - devices_info[i].dev_offset; - index++; - if (type & BTRFS_BLOCK_GROUP_DUP) { - map->stripes[index].dev = device; - map->stripes[index].physical = - devices_info[i].dev_offset + - calc_size; - index++; - } - } else if (ret != -ENOSPC) - goto error; - - devices_info[i].dev = device; - i++; - } else if (device->in_fs_metadata && - avail >= BTRFS_STRIPE_LEN) { - devices_info[i].dev = device; - devices_info[i].max_avail = avail; - i++; - } - - if (cur == &fs_devices->alloc_list) - break; - } - - list_splice(&private_devs, &fs_devices->alloc_list); - if (index < num_stripes) { - if (index >= min_stripes) { - num_stripes = index; - if (type & (BTRFS_BLOCK_GROUP_RAID10)) { - num_stripes /= sub_stripes; - num_stripes *= sub_stripes; - } - - map = __shrink_map_lookup_stripes(map, num_stripes); - } else if (i >= min_devices) { - ret = __btrfs_alloc_tiny_space(trans, fs_devices, - devices_info, i, type, - &map, min_stripes, - &calc_size); - if (ret) - goto error; - } else { - ret = -ENOSPC; - goto error; + for (i = 0; i < ndevs; ++i) { + for (j = 0; j < dev_stripes; ++j) { + int s = i * dev_stripes + j; + map->stripes[s].dev = devices_info[i].dev; + map->stripes[s].physical = devices_info[i].dev_offset + + j * stripe_size; } } map->sector_size = extent_root->sectorsize; @@ -2621,11 +2490,12 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, map->sub_stripes = sub_stripes; *map_ret = map; - *stripe_size = calc_size; - *num_bytes = chunk_bytes_by_type(type, calc_size, - map->num_stripes, sub_stripes); + num_bytes = stripe_size * (num_stripes / ncopies); + + *stripe_size_out = stripe_size; + *num_bytes_out = num_bytes; - trace_btrfs_chunk_alloc(info->chunk_root, map, start, *num_bytes); + trace_btrfs_chunk_alloc(info->chunk_root, map, start, num_bytes); em = alloc_extent_map(GFP_NOFS); if (!em) { @@ -2634,7 +2504,7 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, } em->bdev = (struct block_device *)map; em->start = start; - em->len = *num_bytes; + em->len = num_bytes; em->block_start = 0; em->block_len = em->len; @@ -2647,20 +2517,21 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, ret = btrfs_make_block_group(trans, extent_root, 0, type, BTRFS_FIRST_CHUNK_TREE_OBJECTID, - start, *num_bytes); + start, num_bytes); BUG_ON(ret); - index = 0; - while (index < map->num_stripes) { - device = map->stripes[index].dev; - dev_offset = map->stripes[index].physical; + for (i = 0; i < map->num_stripes; ++i) { + struct btrfs_device *device; + u64 dev_offset; + + device = map->stripes[i].dev; + dev_offset = map->stripes[i].physical; ret = btrfs_alloc_dev_extent(trans, device, info->chunk_root->root_key.objectid, BTRFS_FIRST_CHUNK_TREE_OBJECTID, - start, dev_offset, calc_size); + start, dev_offset, stripe_size); BUG_ON(ret); - index++; } kfree(devices_info); diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index b502f01f79ed..37ae6e2126a1 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -144,6 +144,7 @@ struct btrfs_device_info { struct btrfs_device *dev; u64 dev_offset; u64 max_avail; + u64 total_avail; }; struct map_lookup { -- cgit v1.2.3 From 5fedefb87bd0a64281d28edd295f29e3b989d78c Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 15 Apr 2011 16:03:35 +0530 Subject: dmaengine/dw_dmac: don't call callback routine in case dmaengine_terminate_all() is called If dmaengine_terminate_all() is called for dma channel, then it doesn't make much sense to call registered callback routine. While in case of success or failure it must be called. Signed-off-by: Viresh Kumar Signed-off-by: Vinod Koul --- drivers/dma/dw_dmac.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-) diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index b15c32ca0efa..265d43c8b359 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -195,18 +195,21 @@ static void dwc_dostart(struct dw_dma_chan *dwc, struct dw_desc *first) /*----------------------------------------------------------------------*/ static void -dwc_descriptor_complete(struct dw_dma_chan *dwc, struct dw_desc *desc) +dwc_descriptor_complete(struct dw_dma_chan *dwc, struct dw_desc *desc, + bool callback_required) { - dma_async_tx_callback callback; - void *param; + dma_async_tx_callback callback = NULL; + void *param = NULL; struct dma_async_tx_descriptor *txd = &desc->txd; struct dw_desc *child; dev_vdbg(chan2dev(&dwc->chan), "descriptor %u complete\n", txd->cookie); dwc->completed = txd->cookie; - callback = txd->callback; - param = txd->callback_param; + if (callback_required) { + callback = txd->callback; + param = txd->callback_param; + } dwc_sync_desc_for_cpu(dwc, desc); @@ -238,11 +241,7 @@ dwc_descriptor_complete(struct dw_dma_chan *dwc, struct dw_desc *desc) } } - /* - * The API requires that no submissions are done from a - * callback, so we don't need to drop the lock here - */ - if (callback) + if (callback_required && callback) callback(param); } @@ -272,7 +271,7 @@ static void dwc_complete_all(struct dw_dma *dw, struct dw_dma_chan *dwc) } list_for_each_entry_safe(desc, _desc, &list, desc_node) - dwc_descriptor_complete(dwc, desc); + dwc_descriptor_complete(dwc, desc, true); } static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc) @@ -322,7 +321,7 @@ static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc) * No descriptors so far seem to be in progress, i.e. * this one must be done. */ - dwc_descriptor_complete(dwc, desc); + dwc_descriptor_complete(dwc, desc, true); } dev_err(chan2dev(&dwc->chan), @@ -384,7 +383,7 @@ static void dwc_handle_error(struct dw_dma *dw, struct dw_dma_chan *dwc) dwc_dump_lli(dwc, &child->lli); /* Pretend the descriptor completed successfully */ - dwc_descriptor_complete(dwc, bad_desc); + dwc_descriptor_complete(dwc, bad_desc, true); } /* --------------------- Cyclic DMA API extensions -------------------- */ @@ -831,7 +830,7 @@ static int dwc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, /* Flush all pending and queued descriptors */ list_for_each_entry_safe(desc, _desc, &list, desc_node) - dwc_descriptor_complete(dwc, desc); + dwc_descriptor_complete(dwc, desc, false); return 0; } -- cgit v1.2.3 From abf53902dcc6d44d2e06b09817fa67857aa686fe Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 15 Apr 2011 16:03:35 +0530 Subject: dmaengine/dw_dmac: set residue as total len in dwc_tx_status if status is !DMA_SUCCESS If transfer status is !=DMA_SUCCESS, return total transfer len as residue, instead of zero. Signed-off-by: Viresh Kumar Signed-off-by: Vinod Koul --- drivers/dma/dw_dmac.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 265d43c8b359..f209ff8835e8 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -860,7 +860,11 @@ dwc_tx_status(struct dma_chan *chan, ret = dma_async_is_complete(cookie, last_complete, last_used); } - dma_set_tx_state(txstate, last_complete, last_used, 0); + if (ret != DMA_SUCCESS) + dma_set_tx_state(txstate, last_complete, last_used, + dwc_first_active(dwc)->len); + else + dma_set_tx_state(txstate, last_complete, last_used, 0); return ret; } -- cgit v1.2.3 From 69dc14b51c1aad9d82afd8f96bf4e4835089bffc Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Mon, 18 Apr 2011 14:54:56 +0530 Subject: dmaengine/dw_dmac: Divide one sg to many desc, if sg len is greater than DWC_MAX_COUNT If len passed in sg for slave_sg transfers is greater than DWC_MAX_COUNT, then driver programmes controller incorrectly. This patch adds code to handle this situation by allocation more than one desc for same sg. Signed-off-by: Viresh Kumar Signed-off-by: Vinod Koul --- drivers/dma/dw_dmac.c | 65 ++++++++++++++++++++++++++++++++++----------------- 1 file changed, 44 insertions(+), 21 deletions(-) diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index f209ff8835e8..a9755e3dd603 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -693,9 +693,15 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, reg = dws->tx_reg; for_each_sg(sgl, sg, sg_len, i) { struct dw_desc *desc; - u32 len; - u32 mem; + u32 len, dlen, mem; + mem = sg_phys(sg); + len = sg_dma_len(sg); + mem_width = 2; + if (unlikely(mem & 3 || len & 3)) + mem_width = 0; + +slave_sg_todev_fill_desc: desc = dwc_desc_get(dwc); if (!desc) { dev_err(chan2dev(chan), @@ -703,16 +709,19 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, goto err_desc_get; } - mem = sg_phys(sg); - len = sg_dma_len(sg); - mem_width = 2; - if (unlikely(mem & 3 || len & 3)) - mem_width = 0; - desc->lli.sar = mem; desc->lli.dar = reg; desc->lli.ctllo = ctllo | DWC_CTLL_SRC_WIDTH(mem_width); - desc->lli.ctlhi = len >> mem_width; + if ((len >> mem_width) > DWC_MAX_COUNT) { + dlen = DWC_MAX_COUNT << mem_width; + mem += dlen; + len -= dlen; + } else { + dlen = len; + len = 0; + } + + desc->lli.ctlhi = dlen >> mem_width; if (!first) { first = desc; @@ -726,7 +735,10 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, &first->tx_list); } prev = desc; - total_len += len; + total_len += dlen; + + if (len) + goto slave_sg_todev_fill_desc; } break; case DMA_FROM_DEVICE: @@ -739,15 +751,7 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, reg = dws->rx_reg; for_each_sg(sgl, sg, sg_len, i) { struct dw_desc *desc; - u32 len; - u32 mem; - - desc = dwc_desc_get(dwc); - if (!desc) { - dev_err(chan2dev(chan), - "not enough descriptors available\n"); - goto err_desc_get; - } + u32 len, dlen, mem; mem = sg_phys(sg); len = sg_dma_len(sg); @@ -755,10 +759,26 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, if (unlikely(mem & 3 || len & 3)) mem_width = 0; +slave_sg_fromdev_fill_desc: + desc = dwc_desc_get(dwc); + if (!desc) { + dev_err(chan2dev(chan), + "not enough descriptors available\n"); + goto err_desc_get; + } + desc->lli.sar = reg; desc->lli.dar = mem; desc->lli.ctllo = ctllo | DWC_CTLL_DST_WIDTH(mem_width); - desc->lli.ctlhi = len >> reg_width; + if ((len >> reg_width) > DWC_MAX_COUNT) { + dlen = DWC_MAX_COUNT << reg_width; + mem += dlen; + len -= dlen; + } else { + dlen = len; + len = 0; + } + desc->lli.ctlhi = dlen >> reg_width; if (!first) { first = desc; @@ -772,7 +792,10 @@ dwc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, &first->tx_list); } prev = desc; - total_len += len; + total_len += dlen; + + if (len) + goto slave_sg_fromdev_fill_desc; } break; default: -- cgit v1.2.3 From 69cea5a00d3135677939fce1fefe54ed522055a0 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Fri, 15 Apr 2011 16:03:35 +0530 Subject: dmaengine/dw_dmac: Replace spin_lock* with irqsave variants and enable submission from callback dmaengine routines can be called from interrupt context and with interrupts disabled. Whereas spin_unlock_bh can't be called from such contexts. So this patch converts all spin_*_bh routines to irqsave variants. Also, spin_lock() used in tasklet is converted to irqsave variants, as tasklet can be interrupted, and dma requests from such interruptions may also call spin_lock. Now, submission from callbacks are permitted as per dmaengine framework. So we shouldn't hold any locks while calling callbacks. As locks were taken by parent routines, so releasing them before calling callbacks doesn't look clean enough. So, locks are taken inside all routine now, whereever they are required. And dwc_descriptor_complete is always called without taking locks. Signed-off-by: Viresh Kumar Signed-off-by: Vinod Koul --- drivers/dma/dw_dmac.c | 116 +++++++++++++++++++++++++++++++++----------------- 1 file changed, 77 insertions(+), 39 deletions(-) diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index a9755e3dd603..442b98b81e7c 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -93,8 +93,9 @@ static struct dw_desc *dwc_desc_get(struct dw_dma_chan *dwc) struct dw_desc *desc, *_desc; struct dw_desc *ret = NULL; unsigned int i = 0; + unsigned long flags; - spin_lock_bh(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); list_for_each_entry_safe(desc, _desc, &dwc->free_list, desc_node) { if (async_tx_test_ack(&desc->txd)) { list_del(&desc->desc_node); @@ -104,7 +105,7 @@ static struct dw_desc *dwc_desc_get(struct dw_dma_chan *dwc) dev_dbg(chan2dev(&dwc->chan), "desc %p not ACKed\n", desc); i++; } - spin_unlock_bh(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); dev_vdbg(chan2dev(&dwc->chan), "scanned %u descriptors on freelist\n", i); @@ -130,12 +131,14 @@ static void dwc_sync_desc_for_cpu(struct dw_dma_chan *dwc, struct dw_desc *desc) */ static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc) { + unsigned long flags; + if (desc) { struct dw_desc *child; dwc_sync_desc_for_cpu(dwc, desc); - spin_lock_bh(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); list_for_each_entry(child, &desc->tx_list, desc_node) dev_vdbg(chan2dev(&dwc->chan), "moving child desc %p to freelist\n", @@ -143,7 +146,7 @@ static void dwc_desc_put(struct dw_dma_chan *dwc, struct dw_desc *desc) list_splice_init(&desc->tx_list, &dwc->free_list); dev_vdbg(chan2dev(&dwc->chan), "moving desc %p to freelist\n", desc); list_add(&desc->desc_node, &dwc->free_list); - spin_unlock_bh(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); } } @@ -202,9 +205,11 @@ dwc_descriptor_complete(struct dw_dma_chan *dwc, struct dw_desc *desc, void *param = NULL; struct dma_async_tx_descriptor *txd = &desc->txd; struct dw_desc *child; + unsigned long flags; dev_vdbg(chan2dev(&dwc->chan), "descriptor %u complete\n", txd->cookie); + spin_lock_irqsave(&dwc->lock, flags); dwc->completed = txd->cookie; if (callback_required) { callback = txd->callback; @@ -241,6 +246,8 @@ dwc_descriptor_complete(struct dw_dma_chan *dwc, struct dw_desc *desc, } } + spin_unlock_irqrestore(&dwc->lock, flags); + if (callback_required && callback) callback(param); } @@ -249,7 +256,9 @@ static void dwc_complete_all(struct dw_dma *dw, struct dw_dma_chan *dwc) { struct dw_desc *desc, *_desc; LIST_HEAD(list); + unsigned long flags; + spin_lock_irqsave(&dwc->lock, flags); if (dma_readl(dw, CH_EN) & dwc->mask) { dev_err(chan2dev(&dwc->chan), "BUG: XFER bit set, but channel not idle!\n"); @@ -270,6 +279,8 @@ static void dwc_complete_all(struct dw_dma *dw, struct dw_dma_chan *dwc) dwc_dostart(dwc, dwc_first_active(dwc)); } + spin_unlock_irqrestore(&dwc->lock, flags); + list_for_each_entry_safe(desc, _desc, &list, desc_node) dwc_descriptor_complete(dwc, desc, true); } @@ -280,7 +291,9 @@ static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc) struct dw_desc *desc, *_desc; struct dw_desc *child; u32 status_xfer; + unsigned long flags; + spin_lock_irqsave(&dwc->lock, flags); /* * Clear block interrupt flag before scanning so that we don't * miss any, and read LLP before RAW_XFER to ensure it is @@ -293,35 +306,47 @@ static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc) if (status_xfer & dwc->mask) { /* Everything we've submitted is done */ dma_writel(dw, CLEAR.XFER, dwc->mask); + spin_unlock_irqrestore(&dwc->lock, flags); + dwc_complete_all(dw, dwc); return; } - if (list_empty(&dwc->active_list)) + if (list_empty(&dwc->active_list)) { + spin_unlock_irqrestore(&dwc->lock, flags); return; + } dev_vdbg(chan2dev(&dwc->chan), "scan_descriptors: llp=0x%x\n", llp); list_for_each_entry_safe(desc, _desc, &dwc->active_list, desc_node) { /* check first descriptors addr */ - if (desc->txd.phys == llp) + if (desc->txd.phys == llp) { + spin_unlock_irqrestore(&dwc->lock, flags); return; + } /* check first descriptors llp */ - if (desc->lli.llp == llp) + if (desc->lli.llp == llp) { /* This one is currently in progress */ + spin_unlock_irqrestore(&dwc->lock, flags); return; + } list_for_each_entry(child, &desc->tx_list, desc_node) - if (child->lli.llp == llp) + if (child->lli.llp == llp) { /* Currently in progress */ + spin_unlock_irqrestore(&dwc->lock, flags); return; + } /* * No descriptors so far seem to be in progress, i.e. * this one must be done. */ + spin_unlock_irqrestore(&dwc->lock, flags); dwc_descriptor_complete(dwc, desc, true); + spin_lock_irqsave(&dwc->lock, flags); } dev_err(chan2dev(&dwc->chan), @@ -336,6 +361,7 @@ static void dwc_scan_descriptors(struct dw_dma *dw, struct dw_dma_chan *dwc) list_move(dwc->queue.next, &dwc->active_list); dwc_dostart(dwc, dwc_first_active(dwc)); } + spin_unlock_irqrestore(&dwc->lock, flags); } static void dwc_dump_lli(struct dw_dma_chan *dwc, struct dw_lli *lli) @@ -350,9 +376,12 @@ static void dwc_handle_error(struct dw_dma *dw, struct dw_dma_chan *dwc) { struct dw_desc *bad_desc; struct dw_desc *child; + unsigned long flags; dwc_scan_descriptors(dw, dwc); + spin_lock_irqsave(&dwc->lock, flags); + /* * The descriptor currently at the head of the active list is * borked. Since we don't have any way to report errors, we'll @@ -382,6 +411,8 @@ static void dwc_handle_error(struct dw_dma *dw, struct dw_dma_chan *dwc) list_for_each_entry(child, &bad_desc->tx_list, desc_node) dwc_dump_lli(dwc, &child->lli); + spin_unlock_irqrestore(&dwc->lock, flags); + /* Pretend the descriptor completed successfully */ dwc_descriptor_complete(dwc, bad_desc, true); } @@ -406,6 +437,8 @@ EXPORT_SYMBOL(dw_dma_get_dst_addr); static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc, u32 status_block, u32 status_err, u32 status_xfer) { + unsigned long flags; + if (status_block & dwc->mask) { void (*callback)(void *param); void *callback_param; @@ -416,11 +449,9 @@ static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc, callback = dwc->cdesc->period_callback; callback_param = dwc->cdesc->period_callback_param; - if (callback) { - spin_unlock(&dwc->lock); + + if (callback) callback(callback_param); - spin_lock(&dwc->lock); - } } /* @@ -434,6 +465,9 @@ static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc, dev_err(chan2dev(&dwc->chan), "cyclic DMA unexpected %s " "interrupt, stopping DMA transfer\n", status_xfer ? "xfer" : "error"); + + spin_lock_irqsave(&dwc->lock, flags); + dev_err(chan2dev(&dwc->chan), " SAR: 0x%x DAR: 0x%x LLP: 0x%x CTL: 0x%x:%08x\n", channel_readl(dwc, SAR), @@ -457,6 +491,8 @@ static void dwc_handle_cyclic(struct dw_dma *dw, struct dw_dma_chan *dwc, for (i = 0; i < dwc->cdesc->periods; i++) dwc_dump_lli(dwc, &dwc->cdesc->desc[i]->lli); + + spin_unlock_irqrestore(&dwc->lock, flags); } } @@ -480,7 +516,6 @@ static void dw_dma_tasklet(unsigned long data) for (i = 0; i < dw->dma.chancnt; i++) { dwc = &dw->chan[i]; - spin_lock(&dwc->lock); if (test_bit(DW_DMA_IS_CYCLIC, &dwc->flags)) dwc_handle_cyclic(dw, dwc, status_block, status_err, status_xfer); @@ -488,7 +523,6 @@ static void dw_dma_tasklet(unsigned long data) dwc_handle_error(dw, dwc); else if ((status_block | status_xfer) & (1 << i)) dwc_scan_descriptors(dw, dwc); - spin_unlock(&dwc->lock); } /* @@ -543,8 +577,9 @@ static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx) struct dw_desc *desc = txd_to_dw_desc(tx); struct dw_dma_chan *dwc = to_dw_dma_chan(tx->chan); dma_cookie_t cookie; + unsigned long flags; - spin_lock_bh(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); cookie = dwc_assign_cookie(dwc, desc); /* @@ -564,7 +599,7 @@ static dma_cookie_t dwc_tx_submit(struct dma_async_tx_descriptor *tx) list_add_tail(&desc->desc_node, &dwc->queue); } - spin_unlock_bh(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); return cookie; } @@ -826,6 +861,7 @@ static int dwc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, struct dw_dma_chan *dwc = to_dw_dma_chan(chan); struct dw_dma *dw = to_dw_dma(chan->device); struct dw_desc *desc, *_desc; + unsigned long flags; LIST_HEAD(list); /* Only supports DMA_TERMINATE_ALL */ @@ -838,7 +874,7 @@ static int dwc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * channel. We still have to poll the channel enable bit due * to AHB/HSB limitations. */ - spin_lock_bh(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); channel_clear_bit(dw, CH_EN, dwc->mask); @@ -849,7 +885,7 @@ static int dwc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, list_splice_init(&dwc->queue, &list); list_splice_init(&dwc->active_list, &list); - spin_unlock_bh(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); /* Flush all pending and queued descriptors */ list_for_each_entry_safe(desc, _desc, &list, desc_node) @@ -873,9 +909,7 @@ dwc_tx_status(struct dma_chan *chan, ret = dma_async_is_complete(cookie, last_complete, last_used); if (ret != DMA_SUCCESS) { - spin_lock_bh(&dwc->lock); dwc_scan_descriptors(to_dw_dma(chan->device), dwc); - spin_unlock_bh(&dwc->lock); last_complete = dwc->completed; last_used = chan->cookie; @@ -896,10 +930,8 @@ static void dwc_issue_pending(struct dma_chan *chan) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); - spin_lock_bh(&dwc->lock); if (!list_empty(&dwc->queue)) dwc_scan_descriptors(to_dw_dma(chan->device), dwc); - spin_unlock_bh(&dwc->lock); } static int dwc_alloc_chan_resources(struct dma_chan *chan) @@ -911,6 +943,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) int i; u32 cfghi; u32 cfglo; + unsigned long flags; dev_vdbg(chan2dev(chan), "alloc_chan_resources\n"); @@ -948,16 +981,16 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) * doesn't mean what you think it means), and status writeback. */ - spin_lock_bh(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); i = dwc->descs_allocated; while (dwc->descs_allocated < NR_DESCS_PER_CHANNEL) { - spin_unlock_bh(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); desc = kzalloc(sizeof(struct dw_desc), GFP_KERNEL); if (!desc) { dev_info(chan2dev(chan), "only allocated %d descriptors\n", i); - spin_lock_bh(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); break; } @@ -969,7 +1002,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) sizeof(desc->lli), DMA_TO_DEVICE); dwc_desc_put(dwc, desc); - spin_lock_bh(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); i = ++dwc->descs_allocated; } @@ -978,7 +1011,7 @@ static int dwc_alloc_chan_resources(struct dma_chan *chan) channel_set_bit(dw, MASK.BLOCK, dwc->mask); channel_set_bit(dw, MASK.ERROR, dwc->mask); - spin_unlock_bh(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); dev_dbg(chan2dev(chan), "alloc_chan_resources allocated %d descriptors\n", i); @@ -991,6 +1024,7 @@ static void dwc_free_chan_resources(struct dma_chan *chan) struct dw_dma_chan *dwc = to_dw_dma_chan(chan); struct dw_dma *dw = to_dw_dma(chan->device); struct dw_desc *desc, *_desc; + unsigned long flags; LIST_HEAD(list); dev_dbg(chan2dev(chan), "free_chan_resources (descs allocated=%u)\n", @@ -1001,7 +1035,7 @@ static void dwc_free_chan_resources(struct dma_chan *chan) BUG_ON(!list_empty(&dwc->queue)); BUG_ON(dma_readl(to_dw_dma(chan->device), CH_EN) & dwc->mask); - spin_lock_bh(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); list_splice_init(&dwc->free_list, &list); dwc->descs_allocated = 0; @@ -1010,7 +1044,7 @@ static void dwc_free_chan_resources(struct dma_chan *chan) channel_clear_bit(dw, MASK.BLOCK, dwc->mask); channel_clear_bit(dw, MASK.ERROR, dwc->mask); - spin_unlock_bh(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); list_for_each_entry_safe(desc, _desc, &list, desc_node) { dev_vdbg(chan2dev(chan), " freeing descriptor %p\n", desc); @@ -1035,13 +1069,14 @@ int dw_dma_cyclic_start(struct dma_chan *chan) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); struct dw_dma *dw = to_dw_dma(dwc->chan.device); + unsigned long flags; if (!test_bit(DW_DMA_IS_CYCLIC, &dwc->flags)) { dev_err(chan2dev(&dwc->chan), "missing prep for cyclic DMA\n"); return -ENODEV; } - spin_lock(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); /* assert channel is idle */ if (dma_readl(dw, CH_EN) & dwc->mask) { @@ -1054,7 +1089,7 @@ int dw_dma_cyclic_start(struct dma_chan *chan) channel_readl(dwc, LLP), channel_readl(dwc, CTL_HI), channel_readl(dwc, CTL_LO)); - spin_unlock(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); return -EBUSY; } @@ -1069,7 +1104,7 @@ int dw_dma_cyclic_start(struct dma_chan *chan) channel_set_bit(dw, CH_EN, dwc->mask); - spin_unlock(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); return 0; } @@ -1085,14 +1120,15 @@ void dw_dma_cyclic_stop(struct dma_chan *chan) { struct dw_dma_chan *dwc = to_dw_dma_chan(chan); struct dw_dma *dw = to_dw_dma(dwc->chan.device); + unsigned long flags; - spin_lock(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); channel_clear_bit(dw, CH_EN, dwc->mask); while (dma_readl(dw, CH_EN) & dwc->mask) cpu_relax(); - spin_unlock(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); } EXPORT_SYMBOL(dw_dma_cyclic_stop); @@ -1121,17 +1157,18 @@ struct dw_cyclic_desc *dw_dma_cyclic_prep(struct dma_chan *chan, unsigned int reg_width; unsigned int periods; unsigned int i; + unsigned long flags; - spin_lock_bh(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); if (!list_empty(&dwc->queue) || !list_empty(&dwc->active_list)) { - spin_unlock_bh(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); dev_dbg(chan2dev(&dwc->chan), "queue and/or active list are not empty\n"); return ERR_PTR(-EBUSY); } was_cyclic = test_and_set_bit(DW_DMA_IS_CYCLIC, &dwc->flags); - spin_unlock_bh(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); if (was_cyclic) { dev_dbg(chan2dev(&dwc->chan), "channel already prepared for cyclic DMA\n"); @@ -1245,13 +1282,14 @@ void dw_dma_cyclic_free(struct dma_chan *chan) struct dw_dma *dw = to_dw_dma(dwc->chan.device); struct dw_cyclic_desc *cdesc = dwc->cdesc; int i; + unsigned long flags; dev_dbg(chan2dev(&dwc->chan), "cyclic free\n"); if (!cdesc) return; - spin_lock_bh(&dwc->lock); + spin_lock_irqsave(&dwc->lock, flags); channel_clear_bit(dw, CH_EN, dwc->mask); while (dma_readl(dw, CH_EN) & dwc->mask) @@ -1261,7 +1299,7 @@ void dw_dma_cyclic_free(struct dma_chan *chan) dma_writel(dw, CLEAR.ERROR, dwc->mask); dma_writel(dw, CLEAR.XFER, dwc->mask); - spin_unlock_bh(&dwc->lock); + spin_unlock_irqrestore(&dwc->lock, flags); for (i = 0; i < cdesc->periods; i++) dwc_desc_put(dwc, cdesc->desc[i]); -- cgit v1.2.3 From a7c57cf7d4327c41510f8cbf45b1b970e02c34f8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 19 Apr 2011 08:31:32 +0800 Subject: dmaengine/dw_dmac: implement pause and resume in dwc_control Some peripherals like amba-pl011 needs pause to be implemented in DMA controller drivers. This also returns correct status from dwc_tx_status() in case chan is paused. Signed-off-by: Linus Walleij Signed-off-by: Viresh Kumar Signed-off-by: Vinod Koul --- drivers/dma/dw_dmac.c | 59 ++++++++++++++++++++++++++++++---------------- drivers/dma/dw_dmac_regs.h | 1 + 2 files changed, 40 insertions(+), 20 deletions(-) diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index 442b98b81e7c..eec675bf4f95 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -862,34 +862,50 @@ static int dwc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, struct dw_dma *dw = to_dw_dma(chan->device); struct dw_desc *desc, *_desc; unsigned long flags; + u32 cfglo; LIST_HEAD(list); - /* Only supports DMA_TERMINATE_ALL */ - if (cmd != DMA_TERMINATE_ALL) - return -ENXIO; + if (cmd == DMA_PAUSE) { + spin_lock_irqsave(&dwc->lock, flags); - /* - * This is only called when something went wrong elsewhere, so - * we don't really care about the data. Just disable the - * channel. We still have to poll the channel enable bit due - * to AHB/HSB limitations. - */ - spin_lock_irqsave(&dwc->lock, flags); + cfglo = channel_readl(dwc, CFG_LO); + channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP); + while (!(channel_readl(dwc, CFG_LO) & DWC_CFGL_FIFO_EMPTY)) + cpu_relax(); - channel_clear_bit(dw, CH_EN, dwc->mask); + dwc->paused = true; + spin_unlock_irqrestore(&dwc->lock, flags); + } else if (cmd == DMA_RESUME) { + if (!dwc->paused) + return 0; - while (dma_readl(dw, CH_EN) & dwc->mask) - cpu_relax(); + spin_lock_irqsave(&dwc->lock, flags); - /* active_list entries will end up before queued entries */ - list_splice_init(&dwc->queue, &list); - list_splice_init(&dwc->active_list, &list); + cfglo = channel_readl(dwc, CFG_LO); + channel_writel(dwc, CFG_LO, cfglo & ~DWC_CFGL_CH_SUSP); + dwc->paused = false; - spin_unlock_irqrestore(&dwc->lock, flags); + spin_unlock_irqrestore(&dwc->lock, flags); + } else if (cmd == DMA_TERMINATE_ALL) { + spin_lock_irqsave(&dwc->lock, flags); - /* Flush all pending and queued descriptors */ - list_for_each_entry_safe(desc, _desc, &list, desc_node) - dwc_descriptor_complete(dwc, desc, false); + channel_clear_bit(dw, CH_EN, dwc->mask); + while (dma_readl(dw, CH_EN) & dwc->mask) + cpu_relax(); + + dwc->paused = false; + + /* active_list entries will end up before queued entries */ + list_splice_init(&dwc->queue, &list); + list_splice_init(&dwc->active_list, &list); + + spin_unlock_irqrestore(&dwc->lock, flags); + + /* Flush all pending and queued descriptors */ + list_for_each_entry_safe(desc, _desc, &list, desc_node) + dwc_descriptor_complete(dwc, desc, false); + } else + return -ENXIO; return 0; } @@ -923,6 +939,9 @@ dwc_tx_status(struct dma_chan *chan, else dma_set_tx_state(txstate, last_complete, last_used, 0); + if (dwc->paused) + return DMA_PAUSED; + return ret; } diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index 720f821527f8..c968597c32ab 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -138,6 +138,7 @@ struct dw_dma_chan { void __iomem *ch_regs; u8 mask; u8 priority; + bool paused; spinlock_t lock; -- cgit v1.2.3 From 4b42120df72aeebd3967c952804cb1af53b91cc5 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Wed, 11 May 2011 16:28:45 +0900 Subject: ASoC: Remove to support sound for S5P6442 According to removing ARCH_S5P6442, we don't need to support sound for S5P6442. Acked-by: Jassi Brar Cc: Mark Brown Signed-off-by: Kukjin Kim --- sound/soc/samsung/Kconfig | 4 ++-- sound/soc/samsung/smdk_wm8580.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index a3fdfb631469..4b96b18a1bb7 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -1,6 +1,6 @@ config SND_SOC_SAMSUNG tristate "ASoC support for Samsung" - depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_EXYNOS4 + depends on ARCH_S3C2410 || ARCH_S3C64XX || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_S5P64X0 || ARCH_EXYNOS4 select S3C64XX_DMA if ARCH_S3C64XX select S3C2410_DMA if ARCH_S3C2410 help @@ -55,7 +55,7 @@ config SND_SOC_SAMSUNG_JIVE_WM8750 config SND_SOC_SAMSUNG_SMDK_WM8580 tristate "SoC I2S Audio support for WM8580 on SMDK" - depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDK6442 || MACH_SMDKV210 || MACH_SMDKC110) + depends on SND_SOC_SAMSUNG && (MACH_SMDK6410 || MACH_SMDKC100 || MACH_SMDK6440 || MACH_SMDK6450 || MACH_SMDKV210 || MACH_SMDKC110) select SND_SOC_WM8580 select SND_SAMSUNG_I2S help diff --git a/sound/soc/samsung/smdk_wm8580.c b/sound/soc/samsung/smdk_wm8580.c index 8aacf23d6f3a..3d26f6607aa4 100644 --- a/sound/soc/samsung/smdk_wm8580.c +++ b/sound/soc/samsung/smdk_wm8580.c @@ -249,7 +249,7 @@ static int __init smdk_audio_init(void) int ret; char *str; - if (machine_is_smdkc100() || machine_is_smdk6442() + if (machine_is_smdkc100() || machine_is_smdkv210() || machine_is_smdkc110()) { smdk.num_links = 3; /* Secondary is at offset SAMSUNG_I2S_SECOFF from Primary */ -- cgit v1.2.3 From c47d832bc0155153920e507f075647519bad09a2 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 16 May 2011 16:38:14 +0200 Subject: nfsd: make local functions static This also fixes a number of sparse warnings. Signed-off-by: Daniel Mack Cc: Trond Myklebust Cc: J. Bruce Fields Cc: Neil Brown Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs3xdr.c | 2 +- fs/nfsd/nfs4state.c | 4 ++-- fs/nfsd/nfs4xdr.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/nfsd/nfs3xdr.c b/fs/nfsd/nfs3xdr.c index 7e84a852cdae..291f2d2551b3 100644 --- a/fs/nfsd/nfs3xdr.c +++ b/fs/nfsd/nfs3xdr.c @@ -842,7 +842,7 @@ out: return rv; } -__be32 *encode_entryplus_baggage(struct nfsd3_readdirres *cd, __be32 *p, const char *name, int namlen) +static __be32 *encode_entryplus_baggage(struct nfsd3_readdirres *cd, __be32 *p, const char *name, int namlen) { struct svc_fh fh; int err; diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index a2ea14f40b42..a8e4e91587ab 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -2482,7 +2482,7 @@ find_delegation_file(struct nfs4_file *fp, stateid_t *stid) return NULL; } -int share_access_to_flags(u32 share_access) +static int share_access_to_flags(u32 share_access) { share_access &= ~NFS4_SHARE_WANT_MASK; @@ -2902,7 +2902,7 @@ out: return status; } -struct lock_manager nfsd4_manager = { +static struct lock_manager nfsd4_manager = { }; static void diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c index 195a91d9405b..990181103214 100644 --- a/fs/nfsd/nfs4xdr.c +++ b/fs/nfsd/nfs4xdr.c @@ -3115,7 +3115,7 @@ nfsd4_encode_destroy_session(struct nfsd4_compoundres *resp, int nfserr, return nfserr; } -__be32 +static __be32 nfsd4_encode_sequence(struct nfsd4_compoundres *resp, int nfserr, struct nfsd4_sequence *seq) { -- cgit v1.2.3 From a0eb221a446f2f6c988430f0b0a13f74b7c2b799 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 18 May 2011 14:18:57 +0200 Subject: dmaengine: move link order Move the dmaengine subsystem up early in the drivers Makefile so DMA is made available early to all drivers, just like e.g. regulators. Now even regulators can use DMA on the same initlevel. As a result we can bump the ste_dma40 and coh901318 dmaengine drivers down one initlevel to subsys_init(). Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/Makefile | 4 +++- drivers/dma/coh901318.c | 2 +- drivers/dma/ste_dma40.c | 2 +- 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/Makefile b/drivers/Makefile index 3f135b6fb014..e68423da897a 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -17,6 +17,9 @@ obj-$(CONFIG_SFI) += sfi/ # was used and do nothing if so obj-$(CONFIG_PNP) += pnp/ obj-$(CONFIG_ARM_AMBA) += amba/ +# Many drivers will want to use DMA so this has to be made available +# really early. +obj-$(CONFIG_DMA_ENGINE) += dma/ obj-$(CONFIG_VIRTIO) += virtio/ obj-$(CONFIG_XEN) += xen/ @@ -92,7 +95,6 @@ obj-$(CONFIG_EISA) += eisa/ obj-y += lguest/ obj-$(CONFIG_CPU_FREQ) += cpufreq/ obj-$(CONFIG_CPU_IDLE) += cpuidle/ -obj-$(CONFIG_DMA_ENGINE) += dma/ obj-$(CONFIG_MMC) += mmc/ obj-$(CONFIG_MEMSTICK) += memstick/ obj-$(CONFIG_NEW_LEDS) += leds/ diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c index 00deabd9a04b..b5a318916d05 100644 --- a/drivers/dma/coh901318.c +++ b/drivers/dma/coh901318.c @@ -1610,7 +1610,7 @@ int __init coh901318_init(void) { return platform_driver_probe(&coh901318_driver, coh901318_probe); } -arch_initcall(coh901318_init); +subsys_initcall(coh901318_init); void __exit coh901318_exit(void) { diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 65d2535d12ef..5d054bb908e5 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2962,4 +2962,4 @@ static int __init stedma40_init(void) { return platform_driver_probe(&d40_driver, d40_probe); } -arch_initcall(stedma40_init); +subsys_initcall(stedma40_init); -- cgit v1.2.3 From d410fa4ef99112386de5f218dd7df7b4fca910b4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 19 May 2011 15:59:38 -0700 Subject: Create Documentation/security/, move LSM-, credentials-, and keys-related files from Documentation/ to Documentation/security/, add Documentation/security/00-INDEX, and update all occurrences of Documentation/ to Documentation/security/. --- Documentation/00-INDEX | 6 +- Documentation/SELinux.txt | 27 - Documentation/Smack.txt | 541 --------- Documentation/apparmor.txt | 39 - Documentation/credentials.txt | 581 ---------- Documentation/filesystems/nfs/idmapper.txt | 4 +- Documentation/keys-request-key.txt | 202 ---- Documentation/keys-trusted-encrypted.txt | 145 --- Documentation/keys.txt | 1290 --------------------- Documentation/networking/dns_resolver.txt | 4 +- Documentation/security/00-INDEX | 18 + Documentation/security/SELinux.txt | 27 + Documentation/security/Smack.txt | 541 +++++++++ Documentation/security/apparmor.txt | 39 + Documentation/security/credentials.txt | 581 ++++++++++ Documentation/security/keys-request-key.txt | 202 ++++ Documentation/security/keys-trusted-encrypted.txt | 145 +++ Documentation/security/keys.txt | 1290 +++++++++++++++++++++ Documentation/security/tomoyo.txt | 55 + Documentation/tomoyo.txt | 55 - MAINTAINERS | 6 +- include/linux/cred.h | 2 +- include/linux/key.h | 2 +- kernel/cred.c | 2 +- scripts/selinux/README | 2 +- security/apparmor/match.c | 2 +- security/apparmor/policy_unpack.c | 4 +- security/keys/encrypted.c | 2 +- security/keys/request_key.c | 2 +- security/keys/request_key_auth.c | 2 +- security/keys/trusted.c | 2 +- 31 files changed, 2918 insertions(+), 2902 deletions(-) delete mode 100644 Documentation/SELinux.txt delete mode 100644 Documentation/Smack.txt delete mode 100644 Documentation/apparmor.txt delete mode 100644 Documentation/credentials.txt delete mode 100644 Documentation/keys-request-key.txt delete mode 100644 Documentation/keys-trusted-encrypted.txt delete mode 100644 Documentation/keys.txt create mode 100644 Documentation/security/00-INDEX create mode 100644 Documentation/security/SELinux.txt create mode 100644 Documentation/security/Smack.txt create mode 100644 Documentation/security/apparmor.txt create mode 100644 Documentation/security/credentials.txt create mode 100644 Documentation/security/keys-request-key.txt create mode 100644 Documentation/security/keys-trusted-encrypted.txt create mode 100644 Documentation/security/keys.txt create mode 100644 Documentation/security/tomoyo.txt delete mode 100644 Documentation/tomoyo.txt diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index c17cd4bb2290..c8c1cf631b37 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -192,10 +192,6 @@ kernel-docs.txt - listing of various WWW + books that document kernel internals. kernel-parameters.txt - summary listing of command line / boot prompt args for the kernel. -keys-request-key.txt - - description of the kernel key request service. -keys.txt - - description of the kernel key retention service. kobject.txt - info of the kobject infrastructure of the Linux kernel. kprobes.txt @@ -294,6 +290,8 @@ scheduler/ - directory with info on the scheduler. scsi/ - directory with info on Linux scsi support. +security/ + - directory that contains security-related info serial/ - directory with info on the low level serial API. serial-console.txt diff --git a/Documentation/SELinux.txt b/Documentation/SELinux.txt deleted file mode 100644 index 07eae00f3314..000000000000 --- a/Documentation/SELinux.txt +++ /dev/null @@ -1,27 +0,0 @@ -If you want to use SELinux, chances are you will want -to use the distro-provided policies, or install the -latest reference policy release from - http://oss.tresys.com/projects/refpolicy - -However, if you want to install a dummy policy for -testing, you can do using 'mdp' provided under -scripts/selinux. Note that this requires the selinux -userspace to be installed - in particular you will -need checkpolicy to compile a kernel, and setfiles and -fixfiles to label the filesystem. - - 1. Compile the kernel with selinux enabled. - 2. Type 'make' to compile mdp. - 3. Make sure that you are not running with - SELinux enabled and a real policy. If - you are, reboot with selinux disabled - before continuing. - 4. Run install_policy.sh: - cd scripts/selinux - sh install_policy.sh - -Step 4 will create a new dummy policy valid for your -kernel, with a single selinux user, role, and type. -It will compile the policy, will set your SELINUXTYPE to -dummy in /etc/selinux/config, install the compiled policy -as 'dummy', and relabel your filesystem. diff --git a/Documentation/Smack.txt b/Documentation/Smack.txt deleted file mode 100644 index e9dab41c0fe0..000000000000 --- a/Documentation/Smack.txt +++ /dev/null @@ -1,541 +0,0 @@ - - - "Good for you, you've decided to clean the elevator!" - - The Elevator, from Dark Star - -Smack is the the Simplified Mandatory Access Control Kernel. -Smack is a kernel based implementation of mandatory access -control that includes simplicity in its primary design goals. - -Smack is not the only Mandatory Access Control scheme -available for Linux. Those new to Mandatory Access Control -are encouraged to compare Smack with the other mechanisms -available to determine which is best suited to the problem -at hand. - -Smack consists of three major components: - - The kernel - - A start-up script and a few modified applications - - Configuration data - -The kernel component of Smack is implemented as a Linux -Security Modules (LSM) module. It requires netlabel and -works best with file systems that support extended attributes, -although xattr support is not strictly required. -It is safe to run a Smack kernel under a "vanilla" distribution. -Smack kernels use the CIPSO IP option. Some network -configurations are intolerant of IP options and can impede -access to systems that use them as Smack does. - -The startup script etc-init.d-smack should be installed -in /etc/init.d/smack and should be invoked early in the -start-up process. On Fedora rc5.d/S02smack is recommended. -This script ensures that certain devices have the correct -Smack attributes and loads the Smack configuration if -any is defined. This script invokes two programs that -ensure configuration data is properly formatted. These -programs are /usr/sbin/smackload and /usr/sin/smackcipso. -The system will run just fine without these programs, -but it will be difficult to set access rules properly. - -A version of "ls" that provides a "-M" option to display -Smack labels on long listing is available. - -A hacked version of sshd that allows network logins by users -with specific Smack labels is available. This version does -not work for scp. You must set the /etc/ssh/sshd_config -line: - UsePrivilegeSeparation no - -The format of /etc/smack/usr is: - - username smack - -In keeping with the intent of Smack, configuration data is -minimal and not strictly required. The most important -configuration step is mounting the smackfs pseudo filesystem. - -Add this line to /etc/fstab: - - smackfs /smack smackfs smackfsdef=* 0 0 - -and create the /smack directory for mounting. - -Smack uses extended attributes (xattrs) to store file labels. -The command to set a Smack label on a file is: - - # attr -S -s SMACK64 -V "value" path - -NOTE: Smack labels are limited to 23 characters. The attr command - does not enforce this restriction and can be used to set - invalid Smack labels on files. - -If you don't do anything special all users will get the floor ("_") -label when they log in. If you do want to log in via the hacked ssh -at other labels use the attr command to set the smack value on the -home directory and its contents. - -You can add access rules in /etc/smack/accesses. They take the form: - - subjectlabel objectlabel access - -access is a combination of the letters rwxa which specify the -kind of access permitted a subject with subjectlabel on an -object with objectlabel. If there is no rule no access is allowed. - -A process can see the smack label it is running with by -reading /proc/self/attr/current. A privileged process can -set the process smack by writing there. - -Look for additional programs on http://schaufler-ca.com - -From the Smack Whitepaper: - -The Simplified Mandatory Access Control Kernel - -Casey Schaufler -casey@schaufler-ca.com - -Mandatory Access Control - -Computer systems employ a variety of schemes to constrain how information is -shared among the people and services using the machine. Some of these schemes -allow the program or user to decide what other programs or users are allowed -access to pieces of data. These schemes are called discretionary access -control mechanisms because the access control is specified at the discretion -of the user. Other schemes do not leave the decision regarding what a user or -program can access up to users or programs. These schemes are called mandatory -access control mechanisms because you don't have a choice regarding the users -or programs that have access to pieces of data. - -Bell & LaPadula - -From the middle of the 1980's until the turn of the century Mandatory Access -Control (MAC) was very closely associated with the Bell & LaPadula security -model, a mathematical description of the United States Department of Defense -policy for marking paper documents. MAC in this form enjoyed a following -within the Capital Beltway and Scandinavian supercomputer centers but was -often sited as failing to address general needs. - -Domain Type Enforcement - -Around the turn of the century Domain Type Enforcement (DTE) became popular. -This scheme organizes users, programs, and data into domains that are -protected from each other. This scheme has been widely deployed as a component -of popular Linux distributions. The administrative overhead required to -maintain this scheme and the detailed understanding of the whole system -necessary to provide a secure domain mapping leads to the scheme being -disabled or used in limited ways in the majority of cases. - -Smack - -Smack is a Mandatory Access Control mechanism designed to provide useful MAC -while avoiding the pitfalls of its predecessors. The limitations of Bell & -LaPadula are addressed by providing a scheme whereby access can be controlled -according to the requirements of the system and its purpose rather than those -imposed by an arcane government policy. The complexity of Domain Type -Enforcement and avoided by defining access controls in terms of the access -modes already in use. - -Smack Terminology - -The jargon used to talk about Smack will be familiar to those who have dealt -with other MAC systems and shouldn't be too difficult for the uninitiated to -pick up. There are four terms that are used in a specific way and that are -especially important: - - Subject: A subject is an active entity on the computer system. - On Smack a subject is a task, which is in turn the basic unit - of execution. - - Object: An object is a passive entity on the computer system. - On Smack files of all types, IPC, and tasks can be objects. - - Access: Any attempt by a subject to put information into or get - information from an object is an access. - - Label: Data that identifies the Mandatory Access Control - characteristics of a subject or an object. - -These definitions are consistent with the traditional use in the security -community. There are also some terms from Linux that are likely to crop up: - - Capability: A task that possesses a capability has permission to - violate an aspect of the system security policy, as identified by - the specific capability. A task that possesses one or more - capabilities is a privileged task, whereas a task with no - capabilities is an unprivileged task. - - Privilege: A task that is allowed to violate the system security - policy is said to have privilege. As of this writing a task can - have privilege either by possessing capabilities or by having an - effective user of root. - -Smack Basics - -Smack is an extension to a Linux system. It enforces additional restrictions -on what subjects can access which objects, based on the labels attached to -each of the subject and the object. - -Labels - -Smack labels are ASCII character strings, one to twenty-three characters in -length. Single character labels using special characters, that being anything -other than a letter or digit, are reserved for use by the Smack development -team. Smack labels are unstructured, case sensitive, and the only operation -ever performed on them is comparison for equality. Smack labels cannot -contain unprintable characters, the "/" (slash), the "\" (backslash), the "'" -(quote) and '"' (double-quote) characters. -Smack labels cannot begin with a '-', which is reserved for special options. - -There are some predefined labels: - - _ Pronounced "floor", a single underscore character. - ^ Pronounced "hat", a single circumflex character. - * Pronounced "star", a single asterisk character. - ? Pronounced "huh", a single question mark character. - @ Pronounced "Internet", a single at sign character. - -Every task on a Smack system is assigned a label. System tasks, such as -init(8) and systems daemons, are run with the floor ("_") label. User tasks -are assigned labels according to the specification found in the -/etc/smack/user configuration file. - -Access Rules - -Smack uses the traditional access modes of Linux. These modes are read, -execute, write, and occasionally append. There are a few cases where the -access mode may not be obvious. These include: - - Signals: A signal is a write operation from the subject task to - the object task. - Internet Domain IPC: Transmission of a packet is considered a - write operation from the source task to the destination task. - -Smack restricts access based on the label attached to a subject and the label -attached to the object it is trying to access. The rules enforced are, in -order: - - 1. Any access requested by a task labeled "*" is denied. - 2. A read or execute access requested by a task labeled "^" - is permitted. - 3. A read or execute access requested on an object labeled "_" - is permitted. - 4. Any access requested on an object labeled "*" is permitted. - 5. Any access requested by a task on an object with the same - label is permitted. - 6. Any access requested that is explicitly defined in the loaded - rule set is permitted. - 7. Any other access is denied. - -Smack Access Rules - -With the isolation provided by Smack access separation is simple. There are -many interesting cases where limited access by subjects to objects with -different labels is desired. One example is the familiar spy model of -sensitivity, where a scientist working on a highly classified project would be -able to read documents of lower classifications and anything she writes will -be "born" highly classified. To accommodate such schemes Smack includes a -mechanism for specifying rules allowing access between labels. - -Access Rule Format - -The format of an access rule is: - - subject-label object-label access - -Where subject-label is the Smack label of the task, object-label is the Smack -label of the thing being accessed, and access is a string specifying the sort -of access allowed. The Smack labels are limited to 23 characters. The access -specification is searched for letters that describe access modes: - - a: indicates that append access should be granted. - r: indicates that read access should be granted. - w: indicates that write access should be granted. - x: indicates that execute access should be granted. - -Uppercase values for the specification letters are allowed as well. -Access mode specifications can be in any order. Examples of acceptable rules -are: - - TopSecret Secret rx - Secret Unclass R - Manager Game x - User HR w - New Old rRrRr - Closed Off - - -Examples of unacceptable rules are: - - Top Secret Secret rx - Ace Ace r - Odd spells waxbeans - -Spaces are not allowed in labels. Since a subject always has access to files -with the same label specifying a rule for that case is pointless. Only -valid letters (rwxaRWXA) and the dash ('-') character are allowed in -access specifications. The dash is a placeholder, so "a-r" is the same -as "ar". A lone dash is used to specify that no access should be allowed. - -Applying Access Rules - -The developers of Linux rarely define new sorts of things, usually importing -schemes and concepts from other systems. Most often, the other systems are -variants of Unix. Unix has many endearing properties, but consistency of -access control models is not one of them. Smack strives to treat accesses as -uniformly as is sensible while keeping with the spirit of the underlying -mechanism. - -File system objects including files, directories, named pipes, symbolic links, -and devices require access permissions that closely match those used by mode -bit access. To open a file for reading read access is required on the file. To -search a directory requires execute access. Creating a file with write access -requires both read and write access on the containing directory. Deleting a -file requires read and write access to the file and to the containing -directory. It is possible that a user may be able to see that a file exists -but not any of its attributes by the circumstance of having read access to the -containing directory but not to the differently labeled file. This is an -artifact of the file name being data in the directory, not a part of the file. - -IPC objects, message queues, semaphore sets, and memory segments exist in flat -namespaces and access requests are only required to match the object in -question. - -Process objects reflect tasks on the system and the Smack label used to access -them is the same Smack label that the task would use for its own access -attempts. Sending a signal via the kill() system call is a write operation -from the signaler to the recipient. Debugging a process requires both reading -and writing. Creating a new task is an internal operation that results in two -tasks with identical Smack labels and requires no access checks. - -Sockets are data structures attached to processes and sending a packet from -one process to another requires that the sender have write access to the -receiver. The receiver is not required to have read access to the sender. - -Setting Access Rules - -The configuration file /etc/smack/accesses contains the rules to be set at -system startup. The contents are written to the special file /smack/load. -Rules can be written to /smack/load at any time and take effect immediately. -For any pair of subject and object labels there can be only one rule, with the -most recently specified overriding any earlier specification. - -The program smackload is provided to ensure data is formatted -properly when written to /smack/load. This program reads lines -of the form - - subjectlabel objectlabel mode. - -Task Attribute - -The Smack label of a process can be read from /proc//attr/current. A -process can read its own Smack label from /proc/self/attr/current. A -privileged process can change its own Smack label by writing to -/proc/self/attr/current but not the label of another process. - -File Attribute - -The Smack label of a filesystem object is stored as an extended attribute -named SMACK64 on the file. This attribute is in the security namespace. It can -only be changed by a process with privilege. - -Privilege - -A process with CAP_MAC_OVERRIDE is privileged. - -Smack Networking - -As mentioned before, Smack enforces access control on network protocol -transmissions. Every packet sent by a Smack process is tagged with its Smack -label. This is done by adding a CIPSO tag to the header of the IP packet. Each -packet received is expected to have a CIPSO tag that identifies the label and -if it lacks such a tag the network ambient label is assumed. Before the packet -is delivered a check is made to determine that a subject with the label on the -packet has write access to the receiving process and if that is not the case -the packet is dropped. - -CIPSO Configuration - -It is normally unnecessary to specify the CIPSO configuration. The default -values used by the system handle all internal cases. Smack will compose CIPSO -label values to match the Smack labels being used without administrative -intervention. Unlabeled packets that come into the system will be given the -ambient label. - -Smack requires configuration in the case where packets from a system that is -not smack that speaks CIPSO may be encountered. Usually this will be a Trusted -Solaris system, but there are other, less widely deployed systems out there. -CIPSO provides 3 important values, a Domain Of Interpretation (DOI), a level, -and a category set with each packet. The DOI is intended to identify a group -of systems that use compatible labeling schemes, and the DOI specified on the -smack system must match that of the remote system or packets will be -discarded. The DOI is 3 by default. The value can be read from /smack/doi and -can be changed by writing to /smack/doi. - -The label and category set are mapped to a Smack label as defined in -/etc/smack/cipso. - -A Smack/CIPSO mapping has the form: - - smack level [category [category]*] - -Smack does not expect the level or category sets to be related in any -particular way and does not assume or assign accesses based on them. Some -examples of mappings: - - TopSecret 7 - TS:A,B 7 1 2 - SecBDE 5 2 4 6 - RAFTERS 7 12 26 - -The ":" and "," characters are permitted in a Smack label but have no special -meaning. - -The mapping of Smack labels to CIPSO values is defined by writing to -/smack/cipso. Again, the format of data written to this special file -is highly restrictive, so the program smackcipso is provided to -ensure the writes are done properly. This program takes mappings -on the standard input and sends them to /smack/cipso properly. - -In addition to explicit mappings Smack supports direct CIPSO mappings. One -CIPSO level is used to indicate that the category set passed in the packet is -in fact an encoding of the Smack label. The level used is 250 by default. The -value can be read from /smack/direct and changed by writing to /smack/direct. - -Socket Attributes - -There are two attributes that are associated with sockets. These attributes -can only be set by privileged tasks, but any task can read them for their own -sockets. - - SMACK64IPIN: The Smack label of the task object. A privileged - program that will enforce policy may set this to the star label. - - SMACK64IPOUT: The Smack label transmitted with outgoing packets. - A privileged program may set this to match the label of another - task with which it hopes to communicate. - -Smack Netlabel Exceptions - -You will often find that your labeled application has to talk to the outside, -unlabeled world. To do this there's a special file /smack/netlabel where you can -add some exceptions in the form of : -@IP1 LABEL1 or -@IP2/MASK LABEL2 - -It means that your application will have unlabeled access to @IP1 if it has -write access on LABEL1, and access to the subnet @IP2/MASK if it has write -access on LABEL2. - -Entries in the /smack/netlabel file are matched by longest mask first, like in -classless IPv4 routing. - -A special label '@' and an option '-CIPSO' can be used there : -@ means Internet, any application with any label has access to it --CIPSO means standard CIPSO networking - -If you don't know what CIPSO is and don't plan to use it, you can just do : -echo 127.0.0.1 -CIPSO > /smack/netlabel -echo 0.0.0.0/0 @ > /smack/netlabel - -If you use CIPSO on your 192.168.0.0/16 local network and need also unlabeled -Internet access, you can have : -echo 127.0.0.1 -CIPSO > /smack/netlabel -echo 192.168.0.0/16 -CIPSO > /smack/netlabel -echo 0.0.0.0/0 @ > /smack/netlabel - - -Writing Applications for Smack - -There are three sorts of applications that will run on a Smack system. How an -application interacts with Smack will determine what it will have to do to -work properly under Smack. - -Smack Ignorant Applications - -By far the majority of applications have no reason whatever to care about the -unique properties of Smack. Since invoking a program has no impact on the -Smack label associated with the process the only concern likely to arise is -whether the process has execute access to the program. - -Smack Relevant Applications - -Some programs can be improved by teaching them about Smack, but do not make -any security decisions themselves. The utility ls(1) is one example of such a -program. - -Smack Enforcing Applications - -These are special programs that not only know about Smack, but participate in -the enforcement of system policy. In most cases these are the programs that -set up user sessions. There are also network services that provide information -to processes running with various labels. - -File System Interfaces - -Smack maintains labels on file system objects using extended attributes. The -Smack label of a file, directory, or other file system object can be obtained -using getxattr(2). - - len = getxattr("/", "security.SMACK64", value, sizeof (value)); - -will put the Smack label of the root directory into value. A privileged -process can set the Smack label of a file system object with setxattr(2). - - len = strlen("Rubble"); - rc = setxattr("/foo", "security.SMACK64", "Rubble", len, 0); - -will set the Smack label of /foo to "Rubble" if the program has appropriate -privilege. - -Socket Interfaces - -The socket attributes can be read using fgetxattr(2). - -A privileged process can set the Smack label of outgoing packets with -fsetxattr(2). - - len = strlen("Rubble"); - rc = fsetxattr(fd, "security.SMACK64IPOUT", "Rubble", len, 0); - -will set the Smack label "Rubble" on packets going out from the socket if the -program has appropriate privilege. - - rc = fsetxattr(fd, "security.SMACK64IPIN, "*", strlen("*"), 0); - -will set the Smack label "*" as the object label against which incoming -packets will be checked if the program has appropriate privilege. - -Administration - -Smack supports some mount options: - - smackfsdef=label: specifies the label to give files that lack - the Smack label extended attribute. - - smackfsroot=label: specifies the label to assign the root of the - file system if it lacks the Smack extended attribute. - - smackfshat=label: specifies a label that must have read access to - all labels set on the filesystem. Not yet enforced. - - smackfsfloor=label: specifies a label to which all labels set on the - filesystem must have read access. Not yet enforced. - -These mount options apply to all file system types. - -Smack auditing - -If you want Smack auditing of security events, you need to set CONFIG_AUDIT -in your kernel configuration. -By default, all denied events will be audited. You can change this behavior by -writing a single character to the /smack/logging file : -0 : no logging -1 : log denied (default) -2 : log accepted -3 : log denied & accepted - -Events are logged as 'key=value' pairs, for each event you at least will get -the subjet, the object, the rights requested, the action, the kernel function -that triggered the event, plus other pairs depending on the type of event -audited. diff --git a/Documentation/apparmor.txt b/Documentation/apparmor.txt deleted file mode 100644 index 93c1fd7d0635..000000000000 --- a/Documentation/apparmor.txt +++ /dev/null @@ -1,39 +0,0 @@ ---- What is AppArmor? --- - -AppArmor is MAC style security extension for the Linux kernel. It implements -a task centered policy, with task "profiles" being created and loaded -from user space. Tasks on the system that do not have a profile defined for -them run in an unconfined state which is equivalent to standard Linux DAC -permissions. - ---- How to enable/disable --- - -set CONFIG_SECURITY_APPARMOR=y - -If AppArmor should be selected as the default security module then - set CONFIG_DEFAULT_SECURITY="apparmor" - and CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 - -Build the kernel - -If AppArmor is not the default security module it can be enabled by passing -security=apparmor on the kernel's command line. - -If AppArmor is the default security module it can be disabled by passing -apparmor=0, security=XXXX (where XXX is valid security module), on the -kernel's command line - -For AppArmor to enforce any restrictions beyond standard Linux DAC permissions -policy must be loaded into the kernel from user space (see the Documentation -and tools links). - ---- Documentation --- - -Documentation can be found on the wiki. - ---- Links --- - -Mailing List - apparmor@lists.ubuntu.com -Wiki - http://apparmor.wiki.kernel.org/ -User space tools - https://launchpad.net/apparmor -Kernel module - git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git diff --git a/Documentation/credentials.txt b/Documentation/credentials.txt deleted file mode 100644 index 995baf379c07..000000000000 --- a/Documentation/credentials.txt +++ /dev/null @@ -1,581 +0,0 @@ - ==================== - CREDENTIALS IN LINUX - ==================== - -By: David Howells - -Contents: - - (*) Overview. - - (*) Types of credentials. - - (*) File markings. - - (*) Task credentials. - - - Immutable credentials. - - Accessing task credentials. - - Accessing another task's credentials. - - Altering credentials. - - Managing credentials. - - (*) Open file credentials. - - (*) Overriding the VFS's use of credentials. - - -======== -OVERVIEW -======== - -There are several parts to the security check performed by Linux when one -object acts upon another: - - (1) Objects. - - Objects are things in the system that may be acted upon directly by - userspace programs. Linux has a variety of actionable objects, including: - - - Tasks - - Files/inodes - - Sockets - - Message queues - - Shared memory segments - - Semaphores - - Keys - - As a part of the description of all these objects there is a set of - credentials. What's in the set depends on the type of object. - - (2) Object ownership. - - Amongst the credentials of most objects, there will be a subset that - indicates the ownership of that object. This is used for resource - accounting and limitation (disk quotas and task rlimits for example). - - In a standard UNIX filesystem, for instance, this will be defined by the - UID marked on the inode. - - (3) The objective context. - - Also amongst the credentials of those objects, there will be a subset that - indicates the 'objective context' of that object. This may or may not be - the same set as in (2) - in standard UNIX files, for instance, this is the - defined by the UID and the GID marked on the inode. - - The objective context is used as part of the security calculation that is - carried out when an object is acted upon. - - (4) Subjects. - - A subject is an object that is acting upon another object. - - Most of the objects in the system are inactive: they don't act on other - objects within the system. Processes/tasks are the obvious exception: - they do stuff; they access and manipulate things. - - Objects other than tasks may under some circumstances also be subjects. - For instance an open file may send SIGIO to a task using the UID and EUID - given to it by a task that called fcntl(F_SETOWN) upon it. In this case, - the file struct will have a subjective context too. - - (5) The subjective context. - - A subject has an additional interpretation of its credentials. A subset - of its credentials forms the 'subjective context'. The subjective context - is used as part of the security calculation that is carried out when a - subject acts. - - A Linux task, for example, has the FSUID, FSGID and the supplementary - group list for when it is acting upon a file - which are quite separate - from the real UID and GID that normally form the objective context of the - task. - - (6) Actions. - - Linux has a number of actions available that a subject may perform upon an - object. The set of actions available depends on the nature of the subject - and the object. - - Actions include reading, writing, creating and deleting files; forking or - signalling and tracing tasks. - - (7) Rules, access control lists and security calculations. - - When a subject acts upon an object, a security calculation is made. This - involves taking the subjective context, the objective context and the - action, and searching one or more sets of rules to see whether the subject - is granted or denied permission to act in the desired manner on the - object, given those contexts. - - There are two main sources of rules: - - (a) Discretionary access control (DAC): - - Sometimes the object will include sets of rules as part of its - description. This is an 'Access Control List' or 'ACL'. A Linux - file may supply more than one ACL. - - A traditional UNIX file, for example, includes a permissions mask that - is an abbreviated ACL with three fixed classes of subject ('user', - 'group' and 'other'), each of which may be granted certain privileges - ('read', 'write' and 'execute' - whatever those map to for the object - in question). UNIX file permissions do not allow the arbitrary - specification of subjects, however, and so are of limited use. - - A Linux file might also sport a POSIX ACL. This is a list of rules - that grants various permissions to arbitrary subjects. - - (b) Mandatory access control (MAC): - - The system as a whole may have one or more sets of rules that get - applied to all subjects and objects, regardless of their source. - SELinux and Smack are examples of this. - - In the case of SELinux and Smack, each object is given a label as part - of its credentials. When an action is requested, they take the - subject label, the object label and the action and look for a rule - that says that this action is either granted or denied. - - -==================== -TYPES OF CREDENTIALS -==================== - -The Linux kernel supports the following types of credentials: - - (1) Traditional UNIX credentials. - - Real User ID - Real Group ID - - The UID and GID are carried by most, if not all, Linux objects, even if in - some cases it has to be invented (FAT or CIFS files for example, which are - derived from Windows). These (mostly) define the objective context of - that object, with tasks being slightly different in some cases. - - Effective, Saved and FS User ID - Effective, Saved and FS Group ID - Supplementary groups - - These are additional credentials used by tasks only. Usually, an - EUID/EGID/GROUPS will be used as the subjective context, and real UID/GID - will be used as the objective. For tasks, it should be noted that this is - not always true. - - (2) Capabilities. - - Set of permitted capabilities - Set of inheritable capabilities - Set of effective capabilities - Capability bounding set - - These are only carried by tasks. They indicate superior capabilities - granted piecemeal to a task that an ordinary task wouldn't otherwise have. - These are manipulated implicitly by changes to the traditional UNIX - credentials, but can also be manipulated directly by the capset() system - call. - - The permitted capabilities are those caps that the process might grant - itself to its effective or permitted sets through capset(). This - inheritable set might also be so constrained. - - The effective capabilities are the ones that a task is actually allowed to - make use of itself. - - The inheritable capabilities are the ones that may get passed across - execve(). - - The bounding set limits the capabilities that may be inherited across - execve(), especially when a binary is executed that will execute as UID 0. - - (3) Secure management flags (securebits). - - These are only carried by tasks. These govern the way the above - credentials are manipulated and inherited over certain operations such as - execve(). They aren't used directly as objective or subjective - credentials. - - (4) Keys and keyrings. - - These are only carried by tasks. They carry and cache security tokens - that don't fit into the other standard UNIX credentials. They are for - making such things as network filesystem keys available to the file - accesses performed by processes, without the necessity of ordinary - programs having to know about security details involved. - - Keyrings are a special type of key. They carry sets of other keys and can - be searched for the desired key. Each process may subscribe to a number - of keyrings: - - Per-thread keying - Per-process keyring - Per-session keyring - - When a process accesses a key, if not already present, it will normally be - cached on one of these keyrings for future accesses to find. - - For more information on using keys, see Documentation/keys.txt. - - (5) LSM - - The Linux Security Module allows extra controls to be placed over the - operations that a task may do. Currently Linux supports two main - alternate LSM options: SELinux and Smack. - - Both work by labelling the objects in a system and then applying sets of - rules (policies) that say what operations a task with one label may do to - an object with another label. - - (6) AF_KEY - - This is a socket-based approach to credential management for networking - stacks [RFC 2367]. It isn't discussed by this document as it doesn't - interact directly with task and file credentials; rather it keeps system - level credentials. - - -When a file is opened, part of the opening task's subjective context is -recorded in the file struct created. This allows operations using that file -struct to use those credentials instead of the subjective context of the task -that issued the operation. An example of this would be a file opened on a -network filesystem where the credentials of the opened file should be presented -to the server, regardless of who is actually doing a read or a write upon it. - - -============= -FILE MARKINGS -============= - -Files on disk or obtained over the network may have annotations that form the -objective security context of that file. Depending on the type of filesystem, -this may include one or more of the following: - - (*) UNIX UID, GID, mode; - - (*) Windows user ID; - - (*) Access control list; - - (*) LSM security label; - - (*) UNIX exec privilege escalation bits (SUID/SGID); - - (*) File capabilities exec privilege escalation bits. - -These are compared to the task's subjective security context, and certain -operations allowed or disallowed as a result. In the case of execve(), the -privilege escalation bits come into play, and may allow the resulting process -extra privileges, based on the annotations on the executable file. - - -================ -TASK CREDENTIALS -================ - -In Linux, all of a task's credentials are held in (uid, gid) or through -(groups, keys, LSM security) a refcounted structure of type 'struct cred'. -Each task points to its credentials by a pointer called 'cred' in its -task_struct. - -Once a set of credentials has been prepared and committed, it may not be -changed, barring the following exceptions: - - (1) its reference count may be changed; - - (2) the reference count on the group_info struct it points to may be changed; - - (3) the reference count on the security data it points to may be changed; - - (4) the reference count on any keyrings it points to may be changed; - - (5) any keyrings it points to may be revoked, expired or have their security - attributes changed; and - - (6) the contents of any keyrings to which it points may be changed (the whole - point of keyrings being a shared set of credentials, modifiable by anyone - with appropriate access). - -To alter anything in the cred struct, the copy-and-replace principle must be -adhered to. First take a copy, then alter the copy and then use RCU to change -the task pointer to make it point to the new copy. There are wrappers to aid -with this (see below). - -A task may only alter its _own_ credentials; it is no longer permitted for a -task to alter another's credentials. This means the capset() system call is no -longer permitted to take any PID other than the one of the current process. -Also keyctl_instantiate() and keyctl_negate() functions no longer permit -attachment to process-specific keyrings in the requesting process as the -instantiating process may need to create them. - - -IMMUTABLE CREDENTIALS ---------------------- - -Once a set of credentials has been made public (by calling commit_creds() for -example), it must be considered immutable, barring two exceptions: - - (1) The reference count may be altered. - - (2) Whilst the keyring subscriptions of a set of credentials may not be - changed, the keyrings subscribed to may have their contents altered. - -To catch accidental credential alteration at compile time, struct task_struct -has _const_ pointers to its credential sets, as does struct file. Furthermore, -certain functions such as get_cred() and put_cred() operate on const pointers, -thus rendering casts unnecessary, but require to temporarily ditch the const -qualification to be able to alter the reference count. - - -ACCESSING TASK CREDENTIALS --------------------------- - -A task being able to alter only its own credentials permits the current process -to read or replace its own credentials without the need for any form of locking -- which simplifies things greatly. It can just call: - - const struct cred *current_cred() - -to get a pointer to its credentials structure, and it doesn't have to release -it afterwards. - -There are convenience wrappers for retrieving specific aspects of a task's -credentials (the value is simply returned in each case): - - uid_t current_uid(void) Current's real UID - gid_t current_gid(void) Current's real GID - uid_t current_euid(void) Current's effective UID - gid_t current_egid(void) Current's effective GID - uid_t current_fsuid(void) Current's file access UID - gid_t current_fsgid(void) Current's file access GID - kernel_cap_t current_cap(void) Current's effective capabilities - void *current_security(void) Current's LSM security pointer - struct user_struct *current_user(void) Current's user account - -There are also convenience wrappers for retrieving specific associated pairs of -a task's credentials: - - void current_uid_gid(uid_t *, gid_t *); - void current_euid_egid(uid_t *, gid_t *); - void current_fsuid_fsgid(uid_t *, gid_t *); - -which return these pairs of values through their arguments after retrieving -them from the current task's credentials. - - -In addition, there is a function for obtaining a reference on the current -process's current set of credentials: - - const struct cred *get_current_cred(void); - -and functions for getting references to one of the credentials that don't -actually live in struct cred: - - struct user_struct *get_current_user(void); - struct group_info *get_current_groups(void); - -which get references to the current process's user accounting structure and -supplementary groups list respectively. - -Once a reference has been obtained, it must be released with put_cred(), -free_uid() or put_group_info() as appropriate. - - -ACCESSING ANOTHER TASK'S CREDENTIALS ------------------------------------- - -Whilst a task may access its own credentials without the need for locking, the -same is not true of a task wanting to access another task's credentials. It -must use the RCU read lock and rcu_dereference(). - -The rcu_dereference() is wrapped by: - - const struct cred *__task_cred(struct task_struct *task); - -This should be used inside the RCU read lock, as in the following example: - - void foo(struct task_struct *t, struct foo_data *f) - { - const struct cred *tcred; - ... - rcu_read_lock(); - tcred = __task_cred(t); - f->uid = tcred->uid; - f->gid = tcred->gid; - f->groups = get_group_info(tcred->groups); - rcu_read_unlock(); - ... - } - -Should it be necessary to hold another task's credentials for a long period of -time, and possibly to sleep whilst doing so, then the caller should get a -reference on them using: - - const struct cred *get_task_cred(struct task_struct *task); - -This does all the RCU magic inside of it. The caller must call put_cred() on -the credentials so obtained when they're finished with. - - [*] Note: The result of __task_cred() should not be passed directly to - get_cred() as this may race with commit_cred(). - -There are a couple of convenience functions to access bits of another task's -credentials, hiding the RCU magic from the caller: - - uid_t task_uid(task) Task's real UID - uid_t task_euid(task) Task's effective UID - -If the caller is holding the RCU read lock at the time anyway, then: - - __task_cred(task)->uid - __task_cred(task)->euid - -should be used instead. Similarly, if multiple aspects of a task's credentials -need to be accessed, RCU read lock should be used, __task_cred() called, the -result stored in a temporary pointer and then the credential aspects called -from that before dropping the lock. This prevents the potentially expensive -RCU magic from being invoked multiple times. - -Should some other single aspect of another task's credentials need to be -accessed, then this can be used: - - task_cred_xxx(task, member) - -where 'member' is a non-pointer member of the cred struct. For instance: - - uid_t task_cred_xxx(task, suid); - -will retrieve 'struct cred::suid' from the task, doing the appropriate RCU -magic. This may not be used for pointer members as what they point to may -disappear the moment the RCU read lock is dropped. - - -ALTERING CREDENTIALS --------------------- - -As previously mentioned, a task may only alter its own credentials, and may not -alter those of another task. This means that it doesn't need to use any -locking to alter its own credentials. - -To alter the current process's credentials, a function should first prepare a -new set of credentials by calling: - - struct cred *prepare_creds(void); - -this locks current->cred_replace_mutex and then allocates and constructs a -duplicate of the current process's credentials, returning with the mutex still -held if successful. It returns NULL if not successful (out of memory). - -The mutex prevents ptrace() from altering the ptrace state of a process whilst -security checks on credentials construction and changing is taking place as -the ptrace state may alter the outcome, particularly in the case of execve(). - -The new credentials set should be altered appropriately, and any security -checks and hooks done. Both the current and the proposed sets of credentials -are available for this purpose as current_cred() will return the current set -still at this point. - - -When the credential set is ready, it should be committed to the current process -by calling: - - int commit_creds(struct cred *new); - -This will alter various aspects of the credentials and the process, giving the -LSM a chance to do likewise, then it will use rcu_assign_pointer() to actually -commit the new credentials to current->cred, it will release -current->cred_replace_mutex to allow ptrace() to take place, and it will notify -the scheduler and others of the changes. - -This function is guaranteed to return 0, so that it can be tail-called at the -end of such functions as sys_setresuid(). - -Note that this function consumes the caller's reference to the new credentials. -The caller should _not_ call put_cred() on the new credentials afterwards. - -Furthermore, once this function has been called on a new set of credentials, -those credentials may _not_ be changed further. - - -Should the security checks fail or some other error occur after prepare_creds() -has been called, then the following function should be invoked: - - void abort_creds(struct cred *new); - -This releases the lock on current->cred_replace_mutex that prepare_creds() got -and then releases the new credentials. - - -A typical credentials alteration function would look something like this: - - int alter_suid(uid_t suid) - { - struct cred *new; - int ret; - - new = prepare_creds(); - if (!new) - return -ENOMEM; - - new->suid = suid; - ret = security_alter_suid(new); - if (ret < 0) { - abort_creds(new); - return ret; - } - - return commit_creds(new); - } - - -MANAGING CREDENTIALS --------------------- - -There are some functions to help manage credentials: - - (*) void put_cred(const struct cred *cred); - - This releases a reference to the given set of credentials. If the - reference count reaches zero, the credentials will be scheduled for - destruction by the RCU system. - - (*) const struct cred *get_cred(const struct cred *cred); - - This gets a reference on a live set of credentials, returning a pointer to - that set of credentials. - - (*) struct cred *get_new_cred(struct cred *cred); - - This gets a reference on a set of credentials that is under construction - and is thus still mutable, returning a pointer to that set of credentials. - - -===================== -OPEN FILE CREDENTIALS -===================== - -When a new file is opened, a reference is obtained on the opening task's -credentials and this is attached to the file struct as 'f_cred' in place of -'f_uid' and 'f_gid'. Code that used to access file->f_uid and file->f_gid -should now access file->f_cred->fsuid and file->f_cred->fsgid. - -It is safe to access f_cred without the use of RCU or locking because the -pointer will not change over the lifetime of the file struct, and nor will the -contents of the cred struct pointed to, barring the exceptions listed above -(see the Task Credentials section). - - -======================================= -OVERRIDING THE VFS'S USE OF CREDENTIALS -======================================= - -Under some circumstances it is desirable to override the credentials used by -the VFS, and that can be done by calling into such as vfs_mkdir() with a -different set of credentials. This is done in the following places: - - (*) sys_faccessat(). - - (*) do_coredump(). - - (*) nfs4recover.c. diff --git a/Documentation/filesystems/nfs/idmapper.txt b/Documentation/filesystems/nfs/idmapper.txt index b9b4192ea8b5..9c8fd6148656 100644 --- a/Documentation/filesystems/nfs/idmapper.txt +++ b/Documentation/filesystems/nfs/idmapper.txt @@ -47,8 +47,8 @@ request-key will find the first matching line and corresponding program. In this case, /some/other/program will handle all uid lookups and /usr/sbin/nfs.idmap will handle gid, user, and group lookups. -See for more information about the -request-key function. +See for more information +about the request-key function. ========= diff --git a/Documentation/keys-request-key.txt b/Documentation/keys-request-key.txt deleted file mode 100644 index 69686ad12c66..000000000000 --- a/Documentation/keys-request-key.txt +++ /dev/null @@ -1,202 +0,0 @@ - =================== - KEY REQUEST SERVICE - =================== - -The key request service is part of the key retention service (refer to -Documentation/keys.txt). This document explains more fully how the requesting -algorithm works. - -The process starts by either the kernel requesting a service by calling -request_key*(): - - struct key *request_key(const struct key_type *type, - const char *description, - const char *callout_info); - -or: - - struct key *request_key_with_auxdata(const struct key_type *type, - const char *description, - const char *callout_info, - size_t callout_len, - void *aux); - -or: - - struct key *request_key_async(const struct key_type *type, - const char *description, - const char *callout_info, - size_t callout_len); - -or: - - struct key *request_key_async_with_auxdata(const struct key_type *type, - const char *description, - const char *callout_info, - size_t callout_len, - void *aux); - -Or by userspace invoking the request_key system call: - - key_serial_t request_key(const char *type, - const char *description, - const char *callout_info, - key_serial_t dest_keyring); - -The main difference between the access points is that the in-kernel interface -does not need to link the key to a keyring to prevent it from being immediately -destroyed. The kernel interface returns a pointer directly to the key, and -it's up to the caller to destroy the key. - -The request_key*_with_auxdata() calls are like the in-kernel request_key*() -calls, except that they permit auxiliary data to be passed to the upcaller (the -default is NULL). This is only useful for those key types that define their -own upcall mechanism rather than using /sbin/request-key. - -The two async in-kernel calls may return keys that are still in the process of -being constructed. The two non-async ones will wait for construction to -complete first. - -The userspace interface links the key to a keyring associated with the process -to prevent the key from going away, and returns the serial number of the key to -the caller. - - -The following example assumes that the key types involved don't define their -own upcall mechanisms. If they do, then those should be substituted for the -forking and execution of /sbin/request-key. - - -=========== -THE PROCESS -=========== - -A request proceeds in the following manner: - - (1) Process A calls request_key() [the userspace syscall calls the kernel - interface]. - - (2) request_key() searches the process's subscribed keyrings to see if there's - a suitable key there. If there is, it returns the key. If there isn't, - and callout_info is not set, an error is returned. Otherwise the process - proceeds to the next step. - - (3) request_key() sees that A doesn't have the desired key yet, so it creates - two things: - - (a) An uninstantiated key U of requested type and description. - - (b) An authorisation key V that refers to key U and notes that process A - is the context in which key U should be instantiated and secured, and - from which associated key requests may be satisfied. - - (4) request_key() then forks and executes /sbin/request-key with a new session - keyring that contains a link to auth key V. - - (5) /sbin/request-key assumes the authority associated with key U. - - (6) /sbin/request-key execs an appropriate program to perform the actual - instantiation. - - (7) The program may want to access another key from A's context (say a - Kerberos TGT key). It just requests the appropriate key, and the keyring - search notes that the session keyring has auth key V in its bottom level. - - This will permit it to then search the keyrings of process A with the - UID, GID, groups and security info of process A as if it was process A, - and come up with key W. - - (8) The program then does what it must to get the data with which to - instantiate key U, using key W as a reference (perhaps it contacts a - Kerberos server using the TGT) and then instantiates key U. - - (9) Upon instantiating key U, auth key V is automatically revoked so that it - may not be used again. - -(10) The program then exits 0 and request_key() deletes key V and returns key - U to the caller. - -This also extends further. If key W (step 7 above) didn't exist, key W would -be created uninstantiated, another auth key (X) would be created (as per step -3) and another copy of /sbin/request-key spawned (as per step 4); but the -context specified by auth key X will still be process A, as it was in auth key -V. - -This is because process A's keyrings can't simply be attached to -/sbin/request-key at the appropriate places because (a) execve will discard two -of them, and (b) it requires the same UID/GID/Groups all the way through. - - -==================================== -NEGATIVE INSTANTIATION AND REJECTION -==================================== - -Rather than instantiating a key, it is possible for the possessor of an -authorisation key to negatively instantiate a key that's under construction. -This is a short duration placeholder that causes any attempt at re-requesting -the key whilst it exists to fail with error ENOKEY if negated or the specified -error if rejected. - -This is provided to prevent excessive repeated spawning of /sbin/request-key -processes for a key that will never be obtainable. - -Should the /sbin/request-key process exit anything other than 0 or die on a -signal, the key under construction will be automatically negatively -instantiated for a short amount of time. - - -==================== -THE SEARCH ALGORITHM -==================== - -A search of any particular keyring proceeds in the following fashion: - - (1) When the key management code searches for a key (keyring_search_aux) it - firstly calls key_permission(SEARCH) on the keyring it's starting with, - if this denies permission, it doesn't search further. - - (2) It considers all the non-keyring keys within that keyring and, if any key - matches the criteria specified, calls key_permission(SEARCH) on it to see - if the key is allowed to be found. If it is, that key is returned; if - not, the search continues, and the error code is retained if of higher - priority than the one currently set. - - (3) It then considers all the keyring-type keys in the keyring it's currently - searching. It calls key_permission(SEARCH) on each keyring, and if this - grants permission, it recurses, executing steps (2) and (3) on that - keyring. - -The process stops immediately a valid key is found with permission granted to -use it. Any error from a previous match attempt is discarded and the key is -returned. - -When search_process_keyrings() is invoked, it performs the following searches -until one succeeds: - - (1) If extant, the process's thread keyring is searched. - - (2) If extant, the process's process keyring is searched. - - (3) The process's session keyring is searched. - - (4) If the process has assumed the authority associated with a request_key() - authorisation key then: - - (a) If extant, the calling process's thread keyring is searched. - - (b) If extant, the calling process's process keyring is searched. - - (c) The calling process's session keyring is searched. - -The moment one succeeds, all pending errors are discarded and the found key is -returned. - -Only if all these fail does the whole thing fail with the highest priority -error. Note that several errors may have come from LSM. - -The error priority is: - - EKEYREVOKED > EKEYEXPIRED > ENOKEY - -EACCES/EPERM are only returned on a direct search of a specific keyring where -the basal keyring does not grant Search permission. diff --git a/Documentation/keys-trusted-encrypted.txt b/Documentation/keys-trusted-encrypted.txt deleted file mode 100644 index 8fb79bc1ac4b..000000000000 --- a/Documentation/keys-trusted-encrypted.txt +++ /dev/null @@ -1,145 +0,0 @@ - Trusted and Encrypted Keys - -Trusted and Encrypted Keys are two new key types added to the existing kernel -key ring service. Both of these new types are variable length symmetic keys, -and in both cases all keys are created in the kernel, and user space sees, -stores, and loads only encrypted blobs. Trusted Keys require the availability -of a Trusted Platform Module (TPM) chip for greater security, while Encrypted -Keys can be used on any system. All user level blobs, are displayed and loaded -in hex ascii for convenience, and are integrity verified. - -Trusted Keys use a TPM both to generate and to seal the keys. Keys are sealed -under a 2048 bit RSA key in the TPM, and optionally sealed to specified PCR -(integrity measurement) values, and only unsealed by the TPM, if PCRs and blob -integrity verifications match. A loaded Trusted Key can be updated with new -(future) PCR values, so keys are easily migrated to new pcr values, such as -when the kernel and initramfs are updated. The same key can have many saved -blobs under different PCR values, so multiple boots are easily supported. - -By default, trusted keys are sealed under the SRK, which has the default -authorization value (20 zeros). This can be set at takeownership time with the -trouser's utility: "tpm_takeownership -u -z". - -Usage: - keyctl add trusted name "new keylen [options]" ring - keyctl add trusted name "load hex_blob [pcrlock=pcrnum]" ring - keyctl update key "update [options]" - keyctl print keyid - - options: - keyhandle= ascii hex value of sealing key default 0x40000000 (SRK) - keyauth= ascii hex auth for sealing key default 0x00...i - (40 ascii zeros) - blobauth= ascii hex auth for sealed data default 0x00... - (40 ascii zeros) - blobauth= ascii hex auth for sealed data default 0x00... - (40 ascii zeros) - pcrinfo= ascii hex of PCR_INFO or PCR_INFO_LONG (no default) - pcrlock= pcr number to be extended to "lock" blob - migratable= 0|1 indicating permission to reseal to new PCR values, - default 1 (resealing allowed) - -"keyctl print" returns an ascii hex copy of the sealed key, which is in standard -TPM_STORED_DATA format. The key length for new keys are always in bytes. -Trusted Keys can be 32 - 128 bytes (256 - 1024 bits), the upper limit is to fit -within the 2048 bit SRK (RSA) keylength, with all necessary structure/padding. - -Encrypted keys do not depend on a TPM, and are faster, as they use AES for -encryption/decryption. New keys are created from kernel generated random -numbers, and are encrypted/decrypted using a specified 'master' key. The -'master' key can either be a trusted-key or user-key type. The main -disadvantage of encrypted keys is that if they are not rooted in a trusted key, -they are only as secure as the user key encrypting them. The master user key -should therefore be loaded in as secure a way as possible, preferably early in -boot. - -Usage: - keyctl add encrypted name "new key-type:master-key-name keylen" ring - keyctl add encrypted name "load hex_blob" ring - keyctl update keyid "update key-type:master-key-name" - -where 'key-type' is either 'trusted' or 'user'. - -Examples of trusted and encrypted key usage: - -Create and save a trusted key named "kmk" of length 32 bytes: - - $ keyctl add trusted kmk "new 32" @u - 440502848 - - $ keyctl show - Session Keyring - -3 --alswrv 500 500 keyring: _ses - 97833714 --alswrv 500 -1 \_ keyring: _uid.500 - 440502848 --alswrv 500 500 \_ trusted: kmk - - $ keyctl print 440502848 - 0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915 - 3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b - 27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722 - a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec - d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d - dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0 - f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b - e4a8aea2b607ec96931e6f4d4fe563ba - - $ keyctl pipe 440502848 > kmk.blob - -Load a trusted key from the saved blob: - - $ keyctl add trusted kmk "load `cat kmk.blob`" @u - 268728824 - - $ keyctl print 268728824 - 0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915 - 3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b - 27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722 - a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec - d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d - dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0 - f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b - e4a8aea2b607ec96931e6f4d4fe563ba - -Reseal a trusted key under new pcr values: - - $ keyctl update 268728824 "update pcrinfo=`cat pcr.blob`" - $ keyctl print 268728824 - 010100000000002c0002800093c35a09b70fff26e7a98ae786c641e678ec6ffb6b46d805 - 77c8a6377aed9d3219c6dfec4b23ffe3000001005d37d472ac8a44023fbb3d18583a4f73 - d3a076c0858f6f1dcaa39ea0f119911ff03f5406df4f7f27f41da8d7194f45c9f4e00f2e - df449f266253aa3f52e55c53de147773e00f0f9aca86c64d94c95382265968c354c5eab4 - 9638c5ae99c89de1e0997242edfb0b501744e11ff9762dfd951cffd93227cc513384e7e6 - e782c29435c7ec2edafaa2f4c1fe6e7a781b59549ff5296371b42133777dcc5b8b971610 - 94bc67ede19e43ddb9dc2baacad374a36feaf0314d700af0a65c164b7082401740e489c9 - 7ef6a24defe4846104209bf0c3eced7fa1a672ed5b125fc9d8cd88b476a658a4434644ef - df8ae9a178e9f83ba9f08d10fa47e4226b98b0702f06b3b8 - -Create and save an encrypted key "evm" using the above trusted key "kmk": - - $ keyctl add encrypted evm "new trusted:kmk 32" @u - 159771175 - - $ keyctl print 159771175 - trusted:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b382dbbc55 - be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e024717c64 - 5972dcb82ab2dde83376d82b2e3c09ffc - - $ keyctl pipe 159771175 > evm.blob - -Load an encrypted key "evm" from saved blob: - - $ keyctl add encrypted evm "load `cat evm.blob`" @u - 831684262 - - $ keyctl print 831684262 - trusted:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b382dbbc55 - be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e024717c64 - 5972dcb82ab2dde83376d82b2e3c09ffc - - -The initial consumer of trusted keys is EVM, which at boot time needs a high -quality symmetric key for HMAC protection of file metadata. The use of a -trusted key provides strong guarantees that the EVM key has not been -compromised by a user level problem, and when sealed to specific boot PCR -values, protects against boot and offline attacks. Other uses for trusted and -encrypted keys, such as for disk and file encryption are anticipated. diff --git a/Documentation/keys.txt b/Documentation/keys.txt deleted file mode 100644 index 6523a9e6f293..000000000000 --- a/Documentation/keys.txt +++ /dev/null @@ -1,1290 +0,0 @@ - ============================ - KERNEL KEY RETENTION SERVICE - ============================ - -This service allows cryptographic keys, authentication tokens, cross-domain -user mappings, and similar to be cached in the kernel for the use of -filesystems and other kernel services. - -Keyrings are permitted; these are a special type of key that can hold links to -other keys. Processes each have three standard keyring subscriptions that a -kernel service can search for relevant keys. - -The key service can be configured on by enabling: - - "Security options"/"Enable access key retention support" (CONFIG_KEYS) - -This document has the following sections: - - - Key overview - - Key service overview - - Key access permissions - - SELinux support - - New procfs files - - Userspace system call interface - - Kernel services - - Notes on accessing payload contents - - Defining a key type - - Request-key callback service - - Garbage collection - - -============ -KEY OVERVIEW -============ - -In this context, keys represent units of cryptographic data, authentication -tokens, keyrings, etc.. These are represented in the kernel by struct key. - -Each key has a number of attributes: - - - A serial number. - - A type. - - A description (for matching a key in a search). - - Access control information. - - An expiry time. - - A payload. - - State. - - - (*) Each key is issued a serial number of type key_serial_t that is unique for - the lifetime of that key. All serial numbers are positive non-zero 32-bit - integers. - - Userspace programs can use a key's serial numbers as a way to gain access - to it, subject to permission checking. - - (*) Each key is of a defined "type". Types must be registered inside the - kernel by a kernel service (such as a filesystem) before keys of that type - can be added or used. Userspace programs cannot define new types directly. - - Key types are represented in the kernel by struct key_type. This defines a - number of operations that can be performed on a key of that type. - - Should a type be removed from the system, all the keys of that type will - be invalidated. - - (*) Each key has a description. This should be a printable string. The key - type provides an operation to perform a match between the description on a - key and a criterion string. - - (*) Each key has an owner user ID, a group ID and a permissions mask. These - are used to control what a process may do to a key from userspace, and - whether a kernel service will be able to find the key. - - (*) Each key can be set to expire at a specific time by the key type's - instantiation function. Keys can also be immortal. - - (*) Each key can have a payload. This is a quantity of data that represent the - actual "key". In the case of a keyring, this is a list of keys to which - the keyring links; in the case of a user-defined key, it's an arbitrary - blob of data. - - Having a payload is not required; and the payload can, in fact, just be a - value stored in the struct key itself. - - When a key is instantiated, the key type's instantiation function is - called with a blob of data, and that then creates the key's payload in - some way. - - Similarly, when userspace wants to read back the contents of the key, if - permitted, another key type operation will be called to convert the key's - attached payload back into a blob of data. - - (*) Each key can be in one of a number of basic states: - - (*) Uninstantiated. The key exists, but does not have any data attached. - Keys being requested from userspace will be in this state. - - (*) Instantiated. This is the normal state. The key is fully formed, and - has data attached. - - (*) Negative. This is a relatively short-lived state. The key acts as a - note saying that a previous call out to userspace failed, and acts as - a throttle on key lookups. A negative key can be updated to a normal - state. - - (*) Expired. Keys can have lifetimes set. If their lifetime is exceeded, - they traverse to this state. An expired key can be updated back to a - normal state. - - (*) Revoked. A key is put in this state by userspace action. It can't be - found or operated upon (apart from by unlinking it). - - (*) Dead. The key's type was unregistered, and so the key is now useless. - -Keys in the last three states are subject to garbage collection. See the -section on "Garbage collection". - - -==================== -KEY SERVICE OVERVIEW -==================== - -The key service provides a number of features besides keys: - - (*) The key service defines two special key types: - - (+) "keyring" - - Keyrings are special keys that contain a list of other keys. Keyring - lists can be modified using various system calls. Keyrings should not - be given a payload when created. - - (+) "user" - - A key of this type has a description and a payload that are arbitrary - blobs of data. These can be created, updated and read by userspace, - and aren't intended for use by kernel services. - - (*) Each process subscribes to three keyrings: a thread-specific keyring, a - process-specific keyring, and a session-specific keyring. - - The thread-specific keyring is discarded from the child when any sort of - clone, fork, vfork or execve occurs. A new keyring is created only when - required. - - The process-specific keyring is replaced with an empty one in the child on - clone, fork, vfork unless CLONE_THREAD is supplied, in which case it is - shared. execve also discards the process's process keyring and creates a - new one. - - The session-specific keyring is persistent across clone, fork, vfork and - execve, even when the latter executes a set-UID or set-GID binary. A - process can, however, replace its current session keyring with a new one - by using PR_JOIN_SESSION_KEYRING. It is permitted to request an anonymous - new one, or to attempt to create or join one of a specific name. - - The ownership of the thread keyring changes when the real UID and GID of - the thread changes. - - (*) Each user ID resident in the system holds two special keyrings: a user - specific keyring and a default user session keyring. The default session - keyring is initialised with a link to the user-specific keyring. - - When a process changes its real UID, if it used to have no session key, it - will be subscribed to the default session key for the new UID. - - If a process attempts to access its session key when it doesn't have one, - it will be subscribed to the default for its current UID. - - (*) Each user has two quotas against which the keys they own are tracked. One - limits the total number of keys and keyrings, the other limits the total - amount of description and payload space that can be consumed. - - The user can view information on this and other statistics through procfs - files. The root user may also alter the quota limits through sysctl files - (see the section "New procfs files"). - - Process-specific and thread-specific keyrings are not counted towards a - user's quota. - - If a system call that modifies a key or keyring in some way would put the - user over quota, the operation is refused and error EDQUOT is returned. - - (*) There's a system call interface by which userspace programs can create and - manipulate keys and keyrings. - - (*) There's a kernel interface by which services can register types and search - for keys. - - (*) There's a way for the a search done from the kernel to call back to - userspace to request a key that can't be found in a process's keyrings. - - (*) An optional filesystem is available through which the key database can be - viewed and manipulated. - - -====================== -KEY ACCESS PERMISSIONS -====================== - -Keys have an owner user ID, a group access ID, and a permissions mask. The mask -has up to eight bits each for possessor, user, group and other access. Only -six of each set of eight bits are defined. These permissions granted are: - - (*) View - - This permits a key or keyring's attributes to be viewed - including key - type and description. - - (*) Read - - This permits a key's payload to be viewed or a keyring's list of linked - keys. - - (*) Write - - This permits a key's payload to be instantiated or updated, or it allows a - link to be added to or removed from a keyring. - - (*) Search - - This permits keyrings to be searched and keys to be found. Searches can - only recurse into nested keyrings that have search permission set. - - (*) Link - - This permits a key or keyring to be linked to. To create a link from a - keyring to a key, a process must have Write permission on the keyring and - Link permission on the key. - - (*) Set Attribute - - This permits a key's UID, GID and permissions mask to be changed. - -For changing the ownership, group ID or permissions mask, being the owner of -the key or having the sysadmin capability is sufficient. - - -=============== -SELINUX SUPPORT -=============== - -The security class "key" has been added to SELinux so that mandatory access -controls can be applied to keys created within various contexts. This support -is preliminary, and is likely to change quite significantly in the near future. -Currently, all of the basic permissions explained above are provided in SELinux -as well; SELinux is simply invoked after all basic permission checks have been -performed. - -The value of the file /proc/self/attr/keycreate influences the labeling of -newly-created keys. If the contents of that file correspond to an SELinux -security context, then the key will be assigned that context. Otherwise, the -key will be assigned the current context of the task that invoked the key -creation request. Tasks must be granted explicit permission to assign a -particular context to newly-created keys, using the "create" permission in the -key security class. - -The default keyrings associated with users will be labeled with the default -context of the user if and only if the login programs have been instrumented to -properly initialize keycreate during the login process. Otherwise, they will -be labeled with the context of the login program itself. - -Note, however, that the default keyrings associated with the root user are -labeled with the default kernel context, since they are created early in the -boot process, before root has a chance to log in. - -The keyrings associated with new threads are each labeled with the context of -their associated thread, and both session and process keyrings are handled -similarly. - - -================ -NEW PROCFS FILES -================ - -Two files have been added to procfs by which an administrator can find out -about the status of the key service: - - (*) /proc/keys - - This lists the keys that are currently viewable by the task reading the - file, giving information about their type, description and permissions. - It is not possible to view the payload of the key this way, though some - information about it may be given. - - The only keys included in the list are those that grant View permission to - the reading process whether or not it possesses them. Note that LSM - security checks are still performed, and may further filter out keys that - the current process is not authorised to view. - - The contents of the file look like this: - - SERIAL FLAGS USAGE EXPY PERM UID GID TYPE DESCRIPTION: SUMMARY - 00000001 I----- 39 perm 1f3f0000 0 0 keyring _uid_ses.0: 1/4 - 00000002 I----- 2 perm 1f3f0000 0 0 keyring _uid.0: empty - 00000007 I----- 1 perm 1f3f0000 0 0 keyring _pid.1: empty - 0000018d I----- 1 perm 1f3f0000 0 0 keyring _pid.412: empty - 000004d2 I--Q-- 1 perm 1f3f0000 32 -1 keyring _uid.32: 1/4 - 000004d3 I--Q-- 3 perm 1f3f0000 32 -1 keyring _uid_ses.32: empty - 00000892 I--QU- 1 perm 1f000000 0 0 user metal:copper: 0 - 00000893 I--Q-N 1 35s 1f3f0000 0 0 user metal:silver: 0 - 00000894 I--Q-- 1 10h 003f0000 0 0 user metal:gold: 0 - - The flags are: - - I Instantiated - R Revoked - D Dead - Q Contributes to user's quota - U Under construction by callback to userspace - N Negative key - - This file must be enabled at kernel configuration time as it allows anyone - to list the keys database. - - (*) /proc/key-users - - This file lists the tracking data for each user that has at least one key - on the system. Such data includes quota information and statistics: - - [root@andromeda root]# cat /proc/key-users - 0: 46 45/45 1/100 13/10000 - 29: 2 2/2 2/100 40/10000 - 32: 2 2/2 2/100 40/10000 - 38: 2 2/2 2/100 40/10000 - - The format of each line is - : User ID to which this applies - Structure refcount - / Total number of keys and number instantiated - / Key count quota - / Key size quota - - -Four new sysctl files have been added also for the purpose of controlling the -quota limits on keys: - - (*) /proc/sys/kernel/keys/root_maxkeys - /proc/sys/kernel/keys/root_maxbytes - - These files hold the maximum number of keys that root may have and the - maximum total number of bytes of data that root may have stored in those - keys. - - (*) /proc/sys/kernel/keys/maxkeys - /proc/sys/kernel/keys/maxbytes - - These files hold the maximum number of keys that each non-root user may - have and the maximum total number of bytes of data that each of those - users may have stored in their keys. - -Root may alter these by writing each new limit as a decimal number string to -the appropriate file. - - -=============================== -USERSPACE SYSTEM CALL INTERFACE -=============================== - -Userspace can manipulate keys directly through three new syscalls: add_key, -request_key and keyctl. The latter provides a number of functions for -manipulating keys. - -When referring to a key directly, userspace programs should use the key's -serial number (a positive 32-bit integer). However, there are some special -values available for referring to special keys and keyrings that relate to the -process making the call: - - CONSTANT VALUE KEY REFERENCED - ============================== ====== =========================== - KEY_SPEC_THREAD_KEYRING -1 thread-specific keyring - KEY_SPEC_PROCESS_KEYRING -2 process-specific keyring - KEY_SPEC_SESSION_KEYRING -3 session-specific keyring - KEY_SPEC_USER_KEYRING -4 UID-specific keyring - KEY_SPEC_USER_SESSION_KEYRING -5 UID-session keyring - KEY_SPEC_GROUP_KEYRING -6 GID-specific keyring - KEY_SPEC_REQKEY_AUTH_KEY -7 assumed request_key() - authorisation key - - -The main syscalls are: - - (*) Create a new key of given type, description and payload and add it to the - nominated keyring: - - key_serial_t add_key(const char *type, const char *desc, - const void *payload, size_t plen, - key_serial_t keyring); - - If a key of the same type and description as that proposed already exists - in the keyring, this will try to update it with the given payload, or it - will return error EEXIST if that function is not supported by the key - type. The process must also have permission to write to the key to be able - to update it. The new key will have all user permissions granted and no - group or third party permissions. - - Otherwise, this will attempt to create a new key of the specified type and - description, and to instantiate it with the supplied payload and attach it - to the keyring. In this case, an error will be generated if the process - does not have permission to write to the keyring. - - The payload is optional, and the pointer can be NULL if not required by - the type. The payload is plen in size, and plen can be zero for an empty - payload. - - A new keyring can be generated by setting type "keyring", the keyring name - as the description (or NULL) and setting the payload to NULL. - - User defined keys can be created by specifying type "user". It is - recommended that a user defined key's description by prefixed with a type - ID and a colon, such as "krb5tgt:" for a Kerberos 5 ticket granting - ticket. - - Any other type must have been registered with the kernel in advance by a - kernel service such as a filesystem. - - The ID of the new or updated key is returned if successful. - - - (*) Search the process's keyrings for a key, potentially calling out to - userspace to create it. - - key_serial_t request_key(const char *type, const char *description, - const char *callout_info, - key_serial_t dest_keyring); - - This function searches all the process's keyrings in the order thread, - process, session for a matching key. This works very much like - KEYCTL_SEARCH, including the optional attachment of the discovered key to - a keyring. - - If a key cannot be found, and if callout_info is not NULL, then - /sbin/request-key will be invoked in an attempt to obtain a key. The - callout_info string will be passed as an argument to the program. - - See also Documentation/keys-request-key.txt. - - -The keyctl syscall functions are: - - (*) Map a special key ID to a real key ID for this process: - - key_serial_t keyctl(KEYCTL_GET_KEYRING_ID, key_serial_t id, - int create); - - The special key specified by "id" is looked up (with the key being created - if necessary) and the ID of the key or keyring thus found is returned if - it exists. - - If the key does not yet exist, the key will be created if "create" is - non-zero; and the error ENOKEY will be returned if "create" is zero. - - - (*) Replace the session keyring this process subscribes to with a new one: - - key_serial_t keyctl(KEYCTL_JOIN_SESSION_KEYRING, const char *name); - - If name is NULL, an anonymous keyring is created attached to the process - as its session keyring, displacing the old session keyring. - - If name is not NULL, if a keyring of that name exists, the process - attempts to attach it as the session keyring, returning an error if that - is not permitted; otherwise a new keyring of that name is created and - attached as the session keyring. - - To attach to a named keyring, the keyring must have search permission for - the process's ownership. - - The ID of the new session keyring is returned if successful. - - - (*) Update the specified key: - - long keyctl(KEYCTL_UPDATE, key_serial_t key, const void *payload, - size_t plen); - - This will try to update the specified key with the given payload, or it - will return error EOPNOTSUPP if that function is not supported by the key - type. The process must also have permission to write to the key to be able - to update it. - - The payload is of length plen, and may be absent or empty as for - add_key(). - - - (*) Revoke a key: - - long keyctl(KEYCTL_REVOKE, key_serial_t key); - - This makes a key unavailable for further operations. Further attempts to - use the key will be met with error EKEYREVOKED, and the key will no longer - be findable. - - - (*) Change the ownership of a key: - - long keyctl(KEYCTL_CHOWN, key_serial_t key, uid_t uid, gid_t gid); - - This function permits a key's owner and group ID to be changed. Either one - of uid or gid can be set to -1 to suppress that change. - - Only the superuser can change a key's owner to something other than the - key's current owner. Similarly, only the superuser can change a key's - group ID to something other than the calling process's group ID or one of - its group list members. - - - (*) Change the permissions mask on a key: - - long keyctl(KEYCTL_SETPERM, key_serial_t key, key_perm_t perm); - - This function permits the owner of a key or the superuser to change the - permissions mask on a key. - - Only bits the available bits are permitted; if any other bits are set, - error EINVAL will be returned. - - - (*) Describe a key: - - long keyctl(KEYCTL_DESCRIBE, key_serial_t key, char *buffer, - size_t buflen); - - This function returns a summary of the key's attributes (but not its - payload data) as a string in the buffer provided. - - Unless there's an error, it always returns the amount of data it could - produce, even if that's too big for the buffer, but it won't copy more - than requested to userspace. If the buffer pointer is NULL then no copy - will take place. - - A process must have view permission on the key for this function to be - successful. - - If successful, a string is placed in the buffer in the following format: - - ;;;; - - Where type and description are strings, uid and gid are decimal, and perm - is hexadecimal. A NUL character is included at the end of the string if - the buffer is sufficiently big. - - This can be parsed with - - sscanf(buffer, "%[^;];%d;%d;%o;%s", type, &uid, &gid, &mode, desc); - - - (*) Clear out a keyring: - - long keyctl(KEYCTL_CLEAR, key_serial_t keyring); - - This function clears the list of keys attached to a keyring. The calling - process must have write permission on the keyring, and it must be a - keyring (or else error ENOTDIR will result). - - - (*) Link a key into a keyring: - - long keyctl(KEYCTL_LINK, key_serial_t keyring, key_serial_t key); - - This function creates a link from the keyring to the key. The process must - have write permission on the keyring and must have link permission on the - key. - - Should the keyring not be a keyring, error ENOTDIR will result; and if the - keyring is full, error ENFILE will result. - - The link procedure checks the nesting of the keyrings, returning ELOOP if - it appears too deep or EDEADLK if the link would introduce a cycle. - - Any links within the keyring to keys that match the new key in terms of - type and description will be discarded from the keyring as the new one is - added. - - - (*) Unlink a key or keyring from another keyring: - - long keyctl(KEYCTL_UNLINK, key_serial_t keyring, key_serial_t key); - - This function looks through the keyring for the first link to the - specified key, and removes it if found. Subsequent links to that key are - ignored. The process must have write permission on the keyring. - - If the keyring is not a keyring, error ENOTDIR will result; and if the key - is not present, error ENOENT will be the result. - - - (*) Search a keyring tree for a key: - - key_serial_t keyctl(KEYCTL_SEARCH, key_serial_t keyring, - const char *type, const char *description, - key_serial_t dest_keyring); - - This searches the keyring tree headed by the specified keyring until a key - is found that matches the type and description criteria. Each keyring is - checked for keys before recursion into its children occurs. - - The process must have search permission on the top level keyring, or else - error EACCES will result. Only keyrings that the process has search - permission on will be recursed into, and only keys and keyrings for which - a process has search permission can be matched. If the specified keyring - is not a keyring, ENOTDIR will result. - - If the search succeeds, the function will attempt to link the found key - into the destination keyring if one is supplied (non-zero ID). All the - constraints applicable to KEYCTL_LINK apply in this case too. - - Error ENOKEY, EKEYREVOKED or EKEYEXPIRED will be returned if the search - fails. On success, the resulting key ID will be returned. - - - (*) Read the payload data from a key: - - long keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer, - size_t buflen); - - This function attempts to read the payload data from the specified key - into the buffer. The process must have read permission on the key to - succeed. - - The returned data will be processed for presentation by the key type. For - instance, a keyring will return an array of key_serial_t entries - representing the IDs of all the keys to which it is subscribed. The user - defined key type will return its data as is. If a key type does not - implement this function, error EOPNOTSUPP will result. - - As much of the data as can be fitted into the buffer will be copied to - userspace if the buffer pointer is not NULL. - - On a successful return, the function will always return the amount of data - available rather than the amount copied. - - - (*) Instantiate a partially constructed key. - - long keyctl(KEYCTL_INSTANTIATE, key_serial_t key, - const void *payload, size_t plen, - key_serial_t keyring); - long keyctl(KEYCTL_INSTANTIATE_IOV, key_serial_t key, - const struct iovec *payload_iov, unsigned ioc, - key_serial_t keyring); - - If the kernel calls back to userspace to complete the instantiation of a - key, userspace should use this call to supply data for the key before the - invoked process returns, or else the key will be marked negative - automatically. - - The process must have write access on the key to be able to instantiate - it, and the key must be uninstantiated. - - If a keyring is specified (non-zero), the key will also be linked into - that keyring, however all the constraints applying in KEYCTL_LINK apply in - this case too. - - The payload and plen arguments describe the payload data as for add_key(). - - The payload_iov and ioc arguments describe the payload data in an iovec - array instead of a single buffer. - - - (*) Negatively instantiate a partially constructed key. - - long keyctl(KEYCTL_NEGATE, key_serial_t key, - unsigned timeout, key_serial_t keyring); - long keyctl(KEYCTL_REJECT, key_serial_t key, - unsigned timeout, unsigned error, key_serial_t keyring); - - If the kernel calls back to userspace to complete the instantiation of a - key, userspace should use this call mark the key as negative before the - invoked process returns if it is unable to fulfil the request. - - The process must have write access on the key to be able to instantiate - it, and the key must be uninstantiated. - - If a keyring is specified (non-zero), the key will also be linked into - that keyring, however all the constraints applying in KEYCTL_LINK apply in - this case too. - - If the key is rejected, future searches for it will return the specified - error code until the rejected key expires. Negating the key is the same - as rejecting the key with ENOKEY as the error code. - - - (*) Set the default request-key destination keyring. - - long keyctl(KEYCTL_SET_REQKEY_KEYRING, int reqkey_defl); - - This sets the default keyring to which implicitly requested keys will be - attached for this thread. reqkey_defl should be one of these constants: - - CONSTANT VALUE NEW DEFAULT KEYRING - ====================================== ====== ======================= - KEY_REQKEY_DEFL_NO_CHANGE -1 No change - KEY_REQKEY_DEFL_DEFAULT 0 Default[1] - KEY_REQKEY_DEFL_THREAD_KEYRING 1 Thread keyring - KEY_REQKEY_DEFL_PROCESS_KEYRING 2 Process keyring - KEY_REQKEY_DEFL_SESSION_KEYRING 3 Session keyring - KEY_REQKEY_DEFL_USER_KEYRING 4 User keyring - KEY_REQKEY_DEFL_USER_SESSION_KEYRING 5 User session keyring - KEY_REQKEY_DEFL_GROUP_KEYRING 6 Group keyring - - The old default will be returned if successful and error EINVAL will be - returned if reqkey_defl is not one of the above values. - - The default keyring can be overridden by the keyring indicated to the - request_key() system call. - - Note that this setting is inherited across fork/exec. - - [1] The default is: the thread keyring if there is one, otherwise - the process keyring if there is one, otherwise the session keyring if - there is one, otherwise the user default session keyring. - - - (*) Set the timeout on a key. - - long keyctl(KEYCTL_SET_TIMEOUT, key_serial_t key, unsigned timeout); - - This sets or clears the timeout on a key. The timeout can be 0 to clear - the timeout or a number of seconds to set the expiry time that far into - the future. - - The process must have attribute modification access on a key to set its - timeout. Timeouts may not be set with this function on negative, revoked - or expired keys. - - - (*) Assume the authority granted to instantiate a key - - long keyctl(KEYCTL_ASSUME_AUTHORITY, key_serial_t key); - - This assumes or divests the authority required to instantiate the - specified key. Authority can only be assumed if the thread has the - authorisation key associated with the specified key in its keyrings - somewhere. - - Once authority is assumed, searches for keys will also search the - requester's keyrings using the requester's security label, UID, GID and - groups. - - If the requested authority is unavailable, error EPERM will be returned, - likewise if the authority has been revoked because the target key is - already instantiated. - - If the specified key is 0, then any assumed authority will be divested. - - The assumed authoritative key is inherited across fork and exec. - - - (*) Get the LSM security context attached to a key. - - long keyctl(KEYCTL_GET_SECURITY, key_serial_t key, char *buffer, - size_t buflen) - - This function returns a string that represents the LSM security context - attached to a key in the buffer provided. - - Unless there's an error, it always returns the amount of data it could - produce, even if that's too big for the buffer, but it won't copy more - than requested to userspace. If the buffer pointer is NULL then no copy - will take place. - - A NUL character is included at the end of the string if the buffer is - sufficiently big. This is included in the returned count. If no LSM is - in force then an empty string will be returned. - - A process must have view permission on the key for this function to be - successful. - - - (*) Install the calling process's session keyring on its parent. - - long keyctl(KEYCTL_SESSION_TO_PARENT); - - This functions attempts to install the calling process's session keyring - on to the calling process's parent, replacing the parent's current session - keyring. - - The calling process must have the same ownership as its parent, the - keyring must have the same ownership as the calling process, the calling - process must have LINK permission on the keyring and the active LSM module - mustn't deny permission, otherwise error EPERM will be returned. - - Error ENOMEM will be returned if there was insufficient memory to complete - the operation, otherwise 0 will be returned to indicate success. - - The keyring will be replaced next time the parent process leaves the - kernel and resumes executing userspace. - - -=============== -KERNEL SERVICES -=============== - -The kernel services for key management are fairly simple to deal with. They can -be broken down into two areas: keys and key types. - -Dealing with keys is fairly straightforward. Firstly, the kernel service -registers its type, then it searches for a key of that type. It should retain -the key as long as it has need of it, and then it should release it. For a -filesystem or device file, a search would probably be performed during the open -call, and the key released upon close. How to deal with conflicting keys due to -two different users opening the same file is left to the filesystem author to -solve. - -To access the key manager, the following header must be #included: - - - -Specific key types should have a header file under include/keys/ that should be -used to access that type. For keys of type "user", for example, that would be: - - - -Note that there are two different types of pointers to keys that may be -encountered: - - (*) struct key * - - This simply points to the key structure itself. Key structures will be at - least four-byte aligned. - - (*) key_ref_t - - This is equivalent to a struct key *, but the least significant bit is set - if the caller "possesses" the key. By "possession" it is meant that the - calling processes has a searchable link to the key from one of its - keyrings. There are three functions for dealing with these: - - key_ref_t make_key_ref(const struct key *key, - unsigned long possession); - - struct key *key_ref_to_ptr(const key_ref_t key_ref); - - unsigned long is_key_possessed(const key_ref_t key_ref); - - The first function constructs a key reference from a key pointer and - possession information (which must be 0 or 1 and not any other value). - - The second function retrieves the key pointer from a reference and the - third retrieves the possession flag. - -When accessing a key's payload contents, certain precautions must be taken to -prevent access vs modification races. See the section "Notes on accessing -payload contents" for more information. - -(*) To search for a key, call: - - struct key *request_key(const struct key_type *type, - const char *description, - const char *callout_info); - - This is used to request a key or keyring with a description that matches - the description specified according to the key type's match function. This - permits approximate matching to occur. If callout_string is not NULL, then - /sbin/request-key will be invoked in an attempt to obtain the key from - userspace. In that case, callout_string will be passed as an argument to - the program. - - Should the function fail error ENOKEY, EKEYEXPIRED or EKEYREVOKED will be - returned. - - If successful, the key will have been attached to the default keyring for - implicitly obtained request-key keys, as set by KEYCTL_SET_REQKEY_KEYRING. - - See also Documentation/keys-request-key.txt. - - -(*) To search for a key, passing auxiliary data to the upcaller, call: - - struct key *request_key_with_auxdata(const struct key_type *type, - const char *description, - const void *callout_info, - size_t callout_len, - void *aux); - - This is identical to request_key(), except that the auxiliary data is - passed to the key_type->request_key() op if it exists, and the callout_info - is a blob of length callout_len, if given (the length may be 0). - - -(*) A key can be requested asynchronously by calling one of: - - struct key *request_key_async(const struct key_type *type, - const char *description, - const void *callout_info, - size_t callout_len); - - or: - - struct key *request_key_async_with_auxdata(const struct key_type *type, - const char *description, - const char *callout_info, - size_t callout_len, - void *aux); - - which are asynchronous equivalents of request_key() and - request_key_with_auxdata() respectively. - - These two functions return with the key potentially still under - construction. To wait for construction completion, the following should be - called: - - int wait_for_key_construction(struct key *key, bool intr); - - The function will wait for the key to finish being constructed and then - invokes key_validate() to return an appropriate value to indicate the state - of the key (0 indicates the key is usable). - - If intr is true, then the wait can be interrupted by a signal, in which - case error ERESTARTSYS will be returned. - - -(*) When it is no longer required, the key should be released using: - - void key_put(struct key *key); - - Or: - - void key_ref_put(key_ref_t key_ref); - - These can be called from interrupt context. If CONFIG_KEYS is not set then - the argument will not be parsed. - - -(*) Extra references can be made to a key by calling the following function: - - struct key *key_get(struct key *key); - - These need to be disposed of by calling key_put() when they've been - finished with. The key pointer passed in will be returned. If the pointer - is NULL or CONFIG_KEYS is not set then the key will not be dereferenced and - no increment will take place. - - -(*) A key's serial number can be obtained by calling: - - key_serial_t key_serial(struct key *key); - - If key is NULL or if CONFIG_KEYS is not set then 0 will be returned (in the - latter case without parsing the argument). - - -(*) If a keyring was found in the search, this can be further searched by: - - key_ref_t keyring_search(key_ref_t keyring_ref, - const struct key_type *type, - const char *description) - - This searches the keyring tree specified for a matching key. Error ENOKEY - is returned upon failure (use IS_ERR/PTR_ERR to determine). If successful, - the returned key will need to be released. - - The possession attribute from the keyring reference is used to control - access through the permissions mask and is propagated to the returned key - reference pointer if successful. - - -(*) To check the validity of a key, this function can be called: - - int validate_key(struct key *key); - - This checks that the key in question hasn't expired or and hasn't been - revoked. Should the key be invalid, error EKEYEXPIRED or EKEYREVOKED will - be returned. If the key is NULL or if CONFIG_KEYS is not set then 0 will be - returned (in the latter case without parsing the argument). - - -(*) To register a key type, the following function should be called: - - int register_key_type(struct key_type *type); - - This will return error EEXIST if a type of the same name is already - present. - - -(*) To unregister a key type, call: - - void unregister_key_type(struct key_type *type); - - -Under some circumstances, it may be desirable to deal with a bundle of keys. -The facility provides access to the keyring type for managing such a bundle: - - struct key_type key_type_keyring; - -This can be used with a function such as request_key() to find a specific -keyring in a process's keyrings. A keyring thus found can then be searched -with keyring_search(). Note that it is not possible to use request_key() to -search a specific keyring, so using keyrings in this way is of limited utility. - - -=================================== -NOTES ON ACCESSING PAYLOAD CONTENTS -=================================== - -The simplest payload is just a number in key->payload.value. In this case, -there's no need to indulge in RCU or locking when accessing the payload. - -More complex payload contents must be allocated and a pointer to them set in -key->payload.data. One of the following ways must be selected to access the -data: - - (1) Unmodifiable key type. - - If the key type does not have a modify method, then the key's payload can - be accessed without any form of locking, provided that it's known to be - instantiated (uninstantiated keys cannot be "found"). - - (2) The key's semaphore. - - The semaphore could be used to govern access to the payload and to control - the payload pointer. It must be write-locked for modifications and would - have to be read-locked for general access. The disadvantage of doing this - is that the accessor may be required to sleep. - - (3) RCU. - - RCU must be used when the semaphore isn't already held; if the semaphore - is held then the contents can't change under you unexpectedly as the - semaphore must still be used to serialise modifications to the key. The - key management code takes care of this for the key type. - - However, this means using: - - rcu_read_lock() ... rcu_dereference() ... rcu_read_unlock() - - to read the pointer, and: - - rcu_dereference() ... rcu_assign_pointer() ... call_rcu() - - to set the pointer and dispose of the old contents after a grace period. - Note that only the key type should ever modify a key's payload. - - Furthermore, an RCU controlled payload must hold a struct rcu_head for the - use of call_rcu() and, if the payload is of variable size, the length of - the payload. key->datalen cannot be relied upon to be consistent with the - payload just dereferenced if the key's semaphore is not held. - - -=================== -DEFINING A KEY TYPE -=================== - -A kernel service may want to define its own key type. For instance, an AFS -filesystem might want to define a Kerberos 5 ticket key type. To do this, it -author fills in a key_type struct and registers it with the system. - -Source files that implement key types should include the following header file: - - - -The structure has a number of fields, some of which are mandatory: - - (*) const char *name - - The name of the key type. This is used to translate a key type name - supplied by userspace into a pointer to the structure. - - - (*) size_t def_datalen - - This is optional - it supplies the default payload data length as - contributed to the quota. If the key type's payload is always or almost - always the same size, then this is a more efficient way to do things. - - The data length (and quota) on a particular key can always be changed - during instantiation or update by calling: - - int key_payload_reserve(struct key *key, size_t datalen); - - With the revised data length. Error EDQUOT will be returned if this is not - viable. - - - (*) int (*vet_description)(const char *description); - - This optional method is called to vet a key description. If the key type - doesn't approve of the key description, it may return an error, otherwise - it should return 0. - - - (*) int (*instantiate)(struct key *key, const void *data, size_t datalen); - - This method is called to attach a payload to a key during construction. - The payload attached need not bear any relation to the data passed to this - function. - - If the amount of data attached to the key differs from the size in - keytype->def_datalen, then key_payload_reserve() should be called. - - This method does not have to lock the key in order to attach a payload. - The fact that KEY_FLAG_INSTANTIATED is not set in key->flags prevents - anything else from gaining access to the key. - - It is safe to sleep in this method. - - - (*) int (*update)(struct key *key, const void *data, size_t datalen); - - If this type of key can be updated, then this method should be provided. - It is called to update a key's payload from the blob of data provided. - - key_payload_reserve() should be called if the data length might change - before any changes are actually made. Note that if this succeeds, the type - is committed to changing the key because it's already been altered, so all - memory allocation must be done first. - - The key will have its semaphore write-locked before this method is called, - but this only deters other writers; any changes to the key's payload must - be made under RCU conditions, and call_rcu() must be used to dispose of - the old payload. - - key_payload_reserve() should be called before the changes are made, but - after all allocations and other potentially failing function calls are - made. - - It is safe to sleep in this method. - - - (*) int (*match)(const struct key *key, const void *desc); - - This method is called to match a key against a description. It should - return non-zero if the two match, zero if they don't. - - This method should not need to lock the key in any way. The type and - description can be considered invariant, and the payload should not be - accessed (the key may not yet be instantiated). - - It is not safe to sleep in this method; the caller may hold spinlocks. - - - (*) void (*revoke)(struct key *key); - - This method is optional. It is called to discard part of the payload - data upon a key being revoked. The caller will have the key semaphore - write-locked. - - It is safe to sleep in this method, though care should be taken to avoid - a deadlock against the key semaphore. - - - (*) void (*destroy)(struct key *key); - - This method is optional. It is called to discard the payload data on a key - when it is being destroyed. - - This method does not need to lock the key to access the payload; it can - consider the key as being inaccessible at this time. Note that the key's - type may have been changed before this function is called. - - It is not safe to sleep in this method; the caller may hold spinlocks. - - - (*) void (*describe)(const struct key *key, struct seq_file *p); - - This method is optional. It is called during /proc/keys reading to - summarise a key's description and payload in text form. - - This method will be called with the RCU read lock held. rcu_dereference() - should be used to read the payload pointer if the payload is to be - accessed. key->datalen cannot be trusted to stay consistent with the - contents of the payload. - - The description will not change, though the key's state may. - - It is not safe to sleep in this method; the RCU read lock is held by the - caller. - - - (*) long (*read)(const struct key *key, char __user *buffer, size_t buflen); - - This method is optional. It is called by KEYCTL_READ to translate the - key's payload into something a blob of data for userspace to deal with. - Ideally, the blob should be in the same format as that passed in to the - instantiate and update methods. - - If successful, the blob size that could be produced should be returned - rather than the size copied. - - This method will be called with the key's semaphore read-locked. This will - prevent the key's payload changing. It is not necessary to use RCU locking - when accessing the key's payload. It is safe to sleep in this method, such - as might happen when the userspace buffer is accessed. - - - (*) int (*request_key)(struct key_construction *cons, const char *op, - void *aux); - - This method is optional. If provided, request_key() and friends will - invoke this function rather than upcalling to /sbin/request-key to operate - upon a key of this type. - - The aux parameter is as passed to request_key_async_with_auxdata() and - similar or is NULL otherwise. Also passed are the construction record for - the key to be operated upon and the operation type (currently only - "create"). - - This method is permitted to return before the upcall is complete, but the - following function must be called under all circumstances to complete the - instantiation process, whether or not it succeeds, whether or not there's - an error: - - void complete_request_key(struct key_construction *cons, int error); - - The error parameter should be 0 on success, -ve on error. The - construction record is destroyed by this action and the authorisation key - will be revoked. If an error is indicated, the key under construction - will be negatively instantiated if it wasn't already instantiated. - - If this method returns an error, that error will be returned to the - caller of request_key*(). complete_request_key() must be called prior to - returning. - - The key under construction and the authorisation key can be found in the - key_construction struct pointed to by cons: - - (*) struct key *key; - - The key under construction. - - (*) struct key *authkey; - - The authorisation key. - - -============================ -REQUEST-KEY CALLBACK SERVICE -============================ - -To create a new key, the kernel will attempt to execute the following command -line: - - /sbin/request-key create \ - - - is the key being constructed, and the three keyrings are the process -keyrings from the process that caused the search to be issued. These are -included for two reasons: - - (1) There may be an authentication token in one of the keyrings that is - required to obtain the key, eg: a Kerberos Ticket-Granting Ticket. - - (2) The new key should probably be cached in one of these rings. - -This program should set it UID and GID to those specified before attempting to -access any more keys. It may then look around for a user specific process to -hand the request off to (perhaps a path held in placed in another key by, for -example, the KDE desktop manager). - -The program (or whatever it calls) should finish construction of the key by -calling KEYCTL_INSTANTIATE or KEYCTL_INSTANTIATE_IOV, which also permits it to -cache the key in one of the keyrings (probably the session ring) before -returning. Alternatively, the key can be marked as negative with KEYCTL_NEGATE -or KEYCTL_REJECT; this also permits the key to be cached in one of the -keyrings. - -If it returns with the key remaining in the unconstructed state, the key will -be marked as being negative, it will be added to the session keyring, and an -error will be returned to the key requestor. - -Supplementary information may be provided from whoever or whatever invoked this -service. This will be passed as the parameter. If no such -information was made available, then "-" will be passed as this parameter -instead. - - -Similarly, the kernel may attempt to update an expired or a soon to expire key -by executing: - - /sbin/request-key update \ - - -In this case, the program isn't required to actually attach the key to a ring; -the rings are provided for reference. - - -================== -GARBAGE COLLECTION -================== - -Dead keys (for which the type has been removed) will be automatically unlinked -from those keyrings that point to them and deleted as soon as possible by a -background garbage collector. - -Similarly, revoked and expired keys will be garbage collected, but only after a -certain amount of time has passed. This time is set as a number of seconds in: - - /proc/sys/kernel/keys/gc_delay diff --git a/Documentation/networking/dns_resolver.txt b/Documentation/networking/dns_resolver.txt index 04ca06325b08..7f531ad83285 100644 --- a/Documentation/networking/dns_resolver.txt +++ b/Documentation/networking/dns_resolver.txt @@ -139,8 +139,8 @@ the key will be discarded and recreated when the data it holds has expired. dns_query() returns a copy of the value attached to the key, or an error if that is indicated instead. -See for further information about -request-key function. +See for further +information about request-key function. ========= diff --git a/Documentation/security/00-INDEX b/Documentation/security/00-INDEX new file mode 100644 index 000000000000..19bc49439cac --- /dev/null +++ b/Documentation/security/00-INDEX @@ -0,0 +1,18 @@ +00-INDEX + - this file. +SELinux.txt + - how to get started with the SELinux security enhancement. +Smack.txt + - documentation on the Smack Linux Security Module. +apparmor.txt + - documentation on the AppArmor security extension. +credentials.txt + - documentation about credentials in Linux. +keys-request-key.txt + - description of the kernel key request service. +keys-trusted-encrypted.txt + - info on the Trusted and Encrypted keys in the kernel key ring service. +keys.txt + - description of the kernel key retention service. +tomoyo.txt + - documentation on the TOMOYO Linux Security Module. diff --git a/Documentation/security/SELinux.txt b/Documentation/security/SELinux.txt new file mode 100644 index 000000000000..07eae00f3314 --- /dev/null +++ b/Documentation/security/SELinux.txt @@ -0,0 +1,27 @@ +If you want to use SELinux, chances are you will want +to use the distro-provided policies, or install the +latest reference policy release from + http://oss.tresys.com/projects/refpolicy + +However, if you want to install a dummy policy for +testing, you can do using 'mdp' provided under +scripts/selinux. Note that this requires the selinux +userspace to be installed - in particular you will +need checkpolicy to compile a kernel, and setfiles and +fixfiles to label the filesystem. + + 1. Compile the kernel with selinux enabled. + 2. Type 'make' to compile mdp. + 3. Make sure that you are not running with + SELinux enabled and a real policy. If + you are, reboot with selinux disabled + before continuing. + 4. Run install_policy.sh: + cd scripts/selinux + sh install_policy.sh + +Step 4 will create a new dummy policy valid for your +kernel, with a single selinux user, role, and type. +It will compile the policy, will set your SELINUXTYPE to +dummy in /etc/selinux/config, install the compiled policy +as 'dummy', and relabel your filesystem. diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt new file mode 100644 index 000000000000..e9dab41c0fe0 --- /dev/null +++ b/Documentation/security/Smack.txt @@ -0,0 +1,541 @@ + + + "Good for you, you've decided to clean the elevator!" + - The Elevator, from Dark Star + +Smack is the the Simplified Mandatory Access Control Kernel. +Smack is a kernel based implementation of mandatory access +control that includes simplicity in its primary design goals. + +Smack is not the only Mandatory Access Control scheme +available for Linux. Those new to Mandatory Access Control +are encouraged to compare Smack with the other mechanisms +available to determine which is best suited to the problem +at hand. + +Smack consists of three major components: + - The kernel + - A start-up script and a few modified applications + - Configuration data + +The kernel component of Smack is implemented as a Linux +Security Modules (LSM) module. It requires netlabel and +works best with file systems that support extended attributes, +although xattr support is not strictly required. +It is safe to run a Smack kernel under a "vanilla" distribution. +Smack kernels use the CIPSO IP option. Some network +configurations are intolerant of IP options and can impede +access to systems that use them as Smack does. + +The startup script etc-init.d-smack should be installed +in /etc/init.d/smack and should be invoked early in the +start-up process. On Fedora rc5.d/S02smack is recommended. +This script ensures that certain devices have the correct +Smack attributes and loads the Smack configuration if +any is defined. This script invokes two programs that +ensure configuration data is properly formatted. These +programs are /usr/sbin/smackload and /usr/sin/smackcipso. +The system will run just fine without these programs, +but it will be difficult to set access rules properly. + +A version of "ls" that provides a "-M" option to display +Smack labels on long listing is available. + +A hacked version of sshd that allows network logins by users +with specific Smack labels is available. This version does +not work for scp. You must set the /etc/ssh/sshd_config +line: + UsePrivilegeSeparation no + +The format of /etc/smack/usr is: + + username smack + +In keeping with the intent of Smack, configuration data is +minimal and not strictly required. The most important +configuration step is mounting the smackfs pseudo filesystem. + +Add this line to /etc/fstab: + + smackfs /smack smackfs smackfsdef=* 0 0 + +and create the /smack directory for mounting. + +Smack uses extended attributes (xattrs) to store file labels. +The command to set a Smack label on a file is: + + # attr -S -s SMACK64 -V "value" path + +NOTE: Smack labels are limited to 23 characters. The attr command + does not enforce this restriction and can be used to set + invalid Smack labels on files. + +If you don't do anything special all users will get the floor ("_") +label when they log in. If you do want to log in via the hacked ssh +at other labels use the attr command to set the smack value on the +home directory and its contents. + +You can add access rules in /etc/smack/accesses. They take the form: + + subjectlabel objectlabel access + +access is a combination of the letters rwxa which specify the +kind of access permitted a subject with subjectlabel on an +object with objectlabel. If there is no rule no access is allowed. + +A process can see the smack label it is running with by +reading /proc/self/attr/current. A privileged process can +set the process smack by writing there. + +Look for additional programs on http://schaufler-ca.com + +From the Smack Whitepaper: + +The Simplified Mandatory Access Control Kernel + +Casey Schaufler +casey@schaufler-ca.com + +Mandatory Access Control + +Computer systems employ a variety of schemes to constrain how information is +shared among the people and services using the machine. Some of these schemes +allow the program or user to decide what other programs or users are allowed +access to pieces of data. These schemes are called discretionary access +control mechanisms because the access control is specified at the discretion +of the user. Other schemes do not leave the decision regarding what a user or +program can access up to users or programs. These schemes are called mandatory +access control mechanisms because you don't have a choice regarding the users +or programs that have access to pieces of data. + +Bell & LaPadula + +From the middle of the 1980's until the turn of the century Mandatory Access +Control (MAC) was very closely associated with the Bell & LaPadula security +model, a mathematical description of the United States Department of Defense +policy for marking paper documents. MAC in this form enjoyed a following +within the Capital Beltway and Scandinavian supercomputer centers but was +often sited as failing to address general needs. + +Domain Type Enforcement + +Around the turn of the century Domain Type Enforcement (DTE) became popular. +This scheme organizes users, programs, and data into domains that are +protected from each other. This scheme has been widely deployed as a component +of popular Linux distributions. The administrative overhead required to +maintain this scheme and the detailed understanding of the whole system +necessary to provide a secure domain mapping leads to the scheme being +disabled or used in limited ways in the majority of cases. + +Smack + +Smack is a Mandatory Access Control mechanism designed to provide useful MAC +while avoiding the pitfalls of its predecessors. The limitations of Bell & +LaPadula are addressed by providing a scheme whereby access can be controlled +according to the requirements of the system and its purpose rather than those +imposed by an arcane government policy. The complexity of Domain Type +Enforcement and avoided by defining access controls in terms of the access +modes already in use. + +Smack Terminology + +The jargon used to talk about Smack will be familiar to those who have dealt +with other MAC systems and shouldn't be too difficult for the uninitiated to +pick up. There are four terms that are used in a specific way and that are +especially important: + + Subject: A subject is an active entity on the computer system. + On Smack a subject is a task, which is in turn the basic unit + of execution. + + Object: An object is a passive entity on the computer system. + On Smack files of all types, IPC, and tasks can be objects. + + Access: Any attempt by a subject to put information into or get + information from an object is an access. + + Label: Data that identifies the Mandatory Access Control + characteristics of a subject or an object. + +These definitions are consistent with the traditional use in the security +community. There are also some terms from Linux that are likely to crop up: + + Capability: A task that possesses a capability has permission to + violate an aspect of the system security policy, as identified by + the specific capability. A task that possesses one or more + capabilities is a privileged task, whereas a task with no + capabilities is an unprivileged task. + + Privilege: A task that is allowed to violate the system security + policy is said to have privilege. As of this writing a task can + have privilege either by possessing capabilities or by having an + effective user of root. + +Smack Basics + +Smack is an extension to a Linux system. It enforces additional restrictions +on what subjects can access which objects, based on the labels attached to +each of the subject and the object. + +Labels + +Smack labels are ASCII character strings, one to twenty-three characters in +length. Single character labels using special characters, that being anything +other than a letter or digit, are reserved for use by the Smack development +team. Smack labels are unstructured, case sensitive, and the only operation +ever performed on them is comparison for equality. Smack labels cannot +contain unprintable characters, the "/" (slash), the "\" (backslash), the "'" +(quote) and '"' (double-quote) characters. +Smack labels cannot begin with a '-', which is reserved for special options. + +There are some predefined labels: + + _ Pronounced "floor", a single underscore character. + ^ Pronounced "hat", a single circumflex character. + * Pronounced "star", a single asterisk character. + ? Pronounced "huh", a single question mark character. + @ Pronounced "Internet", a single at sign character. + +Every task on a Smack system is assigned a label. System tasks, such as +init(8) and systems daemons, are run with the floor ("_") label. User tasks +are assigned labels according to the specification found in the +/etc/smack/user configuration file. + +Access Rules + +Smack uses the traditional access modes of Linux. These modes are read, +execute, write, and occasionally append. There are a few cases where the +access mode may not be obvious. These include: + + Signals: A signal is a write operation from the subject task to + the object task. + Internet Domain IPC: Transmission of a packet is considered a + write operation from the source task to the destination task. + +Smack restricts access based on the label attached to a subject and the label +attached to the object it is trying to access. The rules enforced are, in +order: + + 1. Any access requested by a task labeled "*" is denied. + 2. A read or execute access requested by a task labeled "^" + is permitted. + 3. A read or execute access requested on an object labeled "_" + is permitted. + 4. Any access requested on an object labeled "*" is permitted. + 5. Any access requested by a task on an object with the same + label is permitted. + 6. Any access requested that is explicitly defined in the loaded + rule set is permitted. + 7. Any other access is denied. + +Smack Access Rules + +With the isolation provided by Smack access separation is simple. There are +many interesting cases where limited access by subjects to objects with +different labels is desired. One example is the familiar spy model of +sensitivity, where a scientist working on a highly classified project would be +able to read documents of lower classifications and anything she writes will +be "born" highly classified. To accommodate such schemes Smack includes a +mechanism for specifying rules allowing access between labels. + +Access Rule Format + +The format of an access rule is: + + subject-label object-label access + +Where subject-label is the Smack label of the task, object-label is the Smack +label of the thing being accessed, and access is a string specifying the sort +of access allowed. The Smack labels are limited to 23 characters. The access +specification is searched for letters that describe access modes: + + a: indicates that append access should be granted. + r: indicates that read access should be granted. + w: indicates that write access should be granted. + x: indicates that execute access should be granted. + +Uppercase values for the specification letters are allowed as well. +Access mode specifications can be in any order. Examples of acceptable rules +are: + + TopSecret Secret rx + Secret Unclass R + Manager Game x + User HR w + New Old rRrRr + Closed Off - + +Examples of unacceptable rules are: + + Top Secret Secret rx + Ace Ace r + Odd spells waxbeans + +Spaces are not allowed in labels. Since a subject always has access to files +with the same label specifying a rule for that case is pointless. Only +valid letters (rwxaRWXA) and the dash ('-') character are allowed in +access specifications. The dash is a placeholder, so "a-r" is the same +as "ar". A lone dash is used to specify that no access should be allowed. + +Applying Access Rules + +The developers of Linux rarely define new sorts of things, usually importing +schemes and concepts from other systems. Most often, the other systems are +variants of Unix. Unix has many endearing properties, but consistency of +access control models is not one of them. Smack strives to treat accesses as +uniformly as is sensible while keeping with the spirit of the underlying +mechanism. + +File system objects including files, directories, named pipes, symbolic links, +and devices require access permissions that closely match those used by mode +bit access. To open a file for reading read access is required on the file. To +search a directory requires execute access. Creating a file with write access +requires both read and write access on the containing directory. Deleting a +file requires read and write access to the file and to the containing +directory. It is possible that a user may be able to see that a file exists +but not any of its attributes by the circumstance of having read access to the +containing directory but not to the differently labeled file. This is an +artifact of the file name being data in the directory, not a part of the file. + +IPC objects, message queues, semaphore sets, and memory segments exist in flat +namespaces and access requests are only required to match the object in +question. + +Process objects reflect tasks on the system and the Smack label used to access +them is the same Smack label that the task would use for its own access +attempts. Sending a signal via the kill() system call is a write operation +from the signaler to the recipient. Debugging a process requires both reading +and writing. Creating a new task is an internal operation that results in two +tasks with identical Smack labels and requires no access checks. + +Sockets are data structures attached to processes and sending a packet from +one process to another requires that the sender have write access to the +receiver. The receiver is not required to have read access to the sender. + +Setting Access Rules + +The configuration file /etc/smack/accesses contains the rules to be set at +system startup. The contents are written to the special file /smack/load. +Rules can be written to /smack/load at any time and take effect immediately. +For any pair of subject and object labels there can be only one rule, with the +most recently specified overriding any earlier specification. + +The program smackload is provided to ensure data is formatted +properly when written to /smack/load. This program reads lines +of the form + + subjectlabel objectlabel mode. + +Task Attribute + +The Smack label of a process can be read from /proc//attr/current. A +process can read its own Smack label from /proc/self/attr/current. A +privileged process can change its own Smack label by writing to +/proc/self/attr/current but not the label of another process. + +File Attribute + +The Smack label of a filesystem object is stored as an extended attribute +named SMACK64 on the file. This attribute is in the security namespace. It can +only be changed by a process with privilege. + +Privilege + +A process with CAP_MAC_OVERRIDE is privileged. + +Smack Networking + +As mentioned before, Smack enforces access control on network protocol +transmissions. Every packet sent by a Smack process is tagged with its Smack +label. This is done by adding a CIPSO tag to the header of the IP packet. Each +packet received is expected to have a CIPSO tag that identifies the label and +if it lacks such a tag the network ambient label is assumed. Before the packet +is delivered a check is made to determine that a subject with the label on the +packet has write access to the receiving process and if that is not the case +the packet is dropped. + +CIPSO Configuration + +It is normally unnecessary to specify the CIPSO configuration. The default +values used by the system handle all internal cases. Smack will compose CIPSO +label values to match the Smack labels being used without administrative +intervention. Unlabeled packets that come into the system will be given the +ambient label. + +Smack requires configuration in the case where packets from a system that is +not smack that speaks CIPSO may be encountered. Usually this will be a Trusted +Solaris system, but there are other, less widely deployed systems out there. +CIPSO provides 3 important values, a Domain Of Interpretation (DOI), a level, +and a category set with each packet. The DOI is intended to identify a group +of systems that use compatible labeling schemes, and the DOI specified on the +smack system must match that of the remote system or packets will be +discarded. The DOI is 3 by default. The value can be read from /smack/doi and +can be changed by writing to /smack/doi. + +The label and category set are mapped to a Smack label as defined in +/etc/smack/cipso. + +A Smack/CIPSO mapping has the form: + + smack level [category [category]*] + +Smack does not expect the level or category sets to be related in any +particular way and does not assume or assign accesses based on them. Some +examples of mappings: + + TopSecret 7 + TS:A,B 7 1 2 + SecBDE 5 2 4 6 + RAFTERS 7 12 26 + +The ":" and "," characters are permitted in a Smack label but have no special +meaning. + +The mapping of Smack labels to CIPSO values is defined by writing to +/smack/cipso. Again, the format of data written to this special file +is highly restrictive, so the program smackcipso is provided to +ensure the writes are done properly. This program takes mappings +on the standard input and sends them to /smack/cipso properly. + +In addition to explicit mappings Smack supports direct CIPSO mappings. One +CIPSO level is used to indicate that the category set passed in the packet is +in fact an encoding of the Smack label. The level used is 250 by default. The +value can be read from /smack/direct and changed by writing to /smack/direct. + +Socket Attributes + +There are two attributes that are associated with sockets. These attributes +can only be set by privileged tasks, but any task can read them for their own +sockets. + + SMACK64IPIN: The Smack label of the task object. A privileged + program that will enforce policy may set this to the star label. + + SMACK64IPOUT: The Smack label transmitted with outgoing packets. + A privileged program may set this to match the label of another + task with which it hopes to communicate. + +Smack Netlabel Exceptions + +You will often find that your labeled application has to talk to the outside, +unlabeled world. To do this there's a special file /smack/netlabel where you can +add some exceptions in the form of : +@IP1 LABEL1 or +@IP2/MASK LABEL2 + +It means that your application will have unlabeled access to @IP1 if it has +write access on LABEL1, and access to the subnet @IP2/MASK if it has write +access on LABEL2. + +Entries in the /smack/netlabel file are matched by longest mask first, like in +classless IPv4 routing. + +A special label '@' and an option '-CIPSO' can be used there : +@ means Internet, any application with any label has access to it +-CIPSO means standard CIPSO networking + +If you don't know what CIPSO is and don't plan to use it, you can just do : +echo 127.0.0.1 -CIPSO > /smack/netlabel +echo 0.0.0.0/0 @ > /smack/netlabel + +If you use CIPSO on your 192.168.0.0/16 local network and need also unlabeled +Internet access, you can have : +echo 127.0.0.1 -CIPSO > /smack/netlabel +echo 192.168.0.0/16 -CIPSO > /smack/netlabel +echo 0.0.0.0/0 @ > /smack/netlabel + + +Writing Applications for Smack + +There are three sorts of applications that will run on a Smack system. How an +application interacts with Smack will determine what it will have to do to +work properly under Smack. + +Smack Ignorant Applications + +By far the majority of applications have no reason whatever to care about the +unique properties of Smack. Since invoking a program has no impact on the +Smack label associated with the process the only concern likely to arise is +whether the process has execute access to the program. + +Smack Relevant Applications + +Some programs can be improved by teaching them about Smack, but do not make +any security decisions themselves. The utility ls(1) is one example of such a +program. + +Smack Enforcing Applications + +These are special programs that not only know about Smack, but participate in +the enforcement of system policy. In most cases these are the programs that +set up user sessions. There are also network services that provide information +to processes running with various labels. + +File System Interfaces + +Smack maintains labels on file system objects using extended attributes. The +Smack label of a file, directory, or other file system object can be obtained +using getxattr(2). + + len = getxattr("/", "security.SMACK64", value, sizeof (value)); + +will put the Smack label of the root directory into value. A privileged +process can set the Smack label of a file system object with setxattr(2). + + len = strlen("Rubble"); + rc = setxattr("/foo", "security.SMACK64", "Rubble", len, 0); + +will set the Smack label of /foo to "Rubble" if the program has appropriate +privilege. + +Socket Interfaces + +The socket attributes can be read using fgetxattr(2). + +A privileged process can set the Smack label of outgoing packets with +fsetxattr(2). + + len = strlen("Rubble"); + rc = fsetxattr(fd, "security.SMACK64IPOUT", "Rubble", len, 0); + +will set the Smack label "Rubble" on packets going out from the socket if the +program has appropriate privilege. + + rc = fsetxattr(fd, "security.SMACK64IPIN, "*", strlen("*"), 0); + +will set the Smack label "*" as the object label against which incoming +packets will be checked if the program has appropriate privilege. + +Administration + +Smack supports some mount options: + + smackfsdef=label: specifies the label to give files that lack + the Smack label extended attribute. + + smackfsroot=label: specifies the label to assign the root of the + file system if it lacks the Smack extended attribute. + + smackfshat=label: specifies a label that must have read access to + all labels set on the filesystem. Not yet enforced. + + smackfsfloor=label: specifies a label to which all labels set on the + filesystem must have read access. Not yet enforced. + +These mount options apply to all file system types. + +Smack auditing + +If you want Smack auditing of security events, you need to set CONFIG_AUDIT +in your kernel configuration. +By default, all denied events will be audited. You can change this behavior by +writing a single character to the /smack/logging file : +0 : no logging +1 : log denied (default) +2 : log accepted +3 : log denied & accepted + +Events are logged as 'key=value' pairs, for each event you at least will get +the subjet, the object, the rights requested, the action, the kernel function +that triggered the event, plus other pairs depending on the type of event +audited. diff --git a/Documentation/security/apparmor.txt b/Documentation/security/apparmor.txt new file mode 100644 index 000000000000..93c1fd7d0635 --- /dev/null +++ b/Documentation/security/apparmor.txt @@ -0,0 +1,39 @@ +--- What is AppArmor? --- + +AppArmor is MAC style security extension for the Linux kernel. It implements +a task centered policy, with task "profiles" being created and loaded +from user space. Tasks on the system that do not have a profile defined for +them run in an unconfined state which is equivalent to standard Linux DAC +permissions. + +--- How to enable/disable --- + +set CONFIG_SECURITY_APPARMOR=y + +If AppArmor should be selected as the default security module then + set CONFIG_DEFAULT_SECURITY="apparmor" + and CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 + +Build the kernel + +If AppArmor is not the default security module it can be enabled by passing +security=apparmor on the kernel's command line. + +If AppArmor is the default security module it can be disabled by passing +apparmor=0, security=XXXX (where XXX is valid security module), on the +kernel's command line + +For AppArmor to enforce any restrictions beyond standard Linux DAC permissions +policy must be loaded into the kernel from user space (see the Documentation +and tools links). + +--- Documentation --- + +Documentation can be found on the wiki. + +--- Links --- + +Mailing List - apparmor@lists.ubuntu.com +Wiki - http://apparmor.wiki.kernel.org/ +User space tools - https://launchpad.net/apparmor +Kernel module - git://git.kernel.org/pub/scm/linux/kernel/git/jj/apparmor-dev.git diff --git a/Documentation/security/credentials.txt b/Documentation/security/credentials.txt new file mode 100644 index 000000000000..fc0366cbd7ce --- /dev/null +++ b/Documentation/security/credentials.txt @@ -0,0 +1,581 @@ + ==================== + CREDENTIALS IN LINUX + ==================== + +By: David Howells + +Contents: + + (*) Overview. + + (*) Types of credentials. + + (*) File markings. + + (*) Task credentials. + + - Immutable credentials. + - Accessing task credentials. + - Accessing another task's credentials. + - Altering credentials. + - Managing credentials. + + (*) Open file credentials. + + (*) Overriding the VFS's use of credentials. + + +======== +OVERVIEW +======== + +There are several parts to the security check performed by Linux when one +object acts upon another: + + (1) Objects. + + Objects are things in the system that may be acted upon directly by + userspace programs. Linux has a variety of actionable objects, including: + + - Tasks + - Files/inodes + - Sockets + - Message queues + - Shared memory segments + - Semaphores + - Keys + + As a part of the description of all these objects there is a set of + credentials. What's in the set depends on the type of object. + + (2) Object ownership. + + Amongst the credentials of most objects, there will be a subset that + indicates the ownership of that object. This is used for resource + accounting and limitation (disk quotas and task rlimits for example). + + In a standard UNIX filesystem, for instance, this will be defined by the + UID marked on the inode. + + (3) The objective context. + + Also amongst the credentials of those objects, there will be a subset that + indicates the 'objective context' of that object. This may or may not be + the same set as in (2) - in standard UNIX files, for instance, this is the + defined by the UID and the GID marked on the inode. + + The objective context is used as part of the security calculation that is + carried out when an object is acted upon. + + (4) Subjects. + + A subject is an object that is acting upon another object. + + Most of the objects in the system are inactive: they don't act on other + objects within the system. Processes/tasks are the obvious exception: + they do stuff; they access and manipulate things. + + Objects other than tasks may under some circumstances also be subjects. + For instance an open file may send SIGIO to a task using the UID and EUID + given to it by a task that called fcntl(F_SETOWN) upon it. In this case, + the file struct will have a subjective context too. + + (5) The subjective context. + + A subject has an additional interpretation of its credentials. A subset + of its credentials forms the 'subjective context'. The subjective context + is used as part of the security calculation that is carried out when a + subject acts. + + A Linux task, for example, has the FSUID, FSGID and the supplementary + group list for when it is acting upon a file - which are quite separate + from the real UID and GID that normally form the objective context of the + task. + + (6) Actions. + + Linux has a number of actions available that a subject may perform upon an + object. The set of actions available depends on the nature of the subject + and the object. + + Actions include reading, writing, creating and deleting files; forking or + signalling and tracing tasks. + + (7) Rules, access control lists and security calculations. + + When a subject acts upon an object, a security calculation is made. This + involves taking the subjective context, the objective context and the + action, and searching one or more sets of rules to see whether the subject + is granted or denied permission to act in the desired manner on the + object, given those contexts. + + There are two main sources of rules: + + (a) Discretionary access control (DAC): + + Sometimes the object will include sets of rules as part of its + description. This is an 'Access Control List' or 'ACL'. A Linux + file may supply more than one ACL. + + A traditional UNIX file, for example, includes a permissions mask that + is an abbreviated ACL with three fixed classes of subject ('user', + 'group' and 'other'), each of which may be granted certain privileges + ('read', 'write' and 'execute' - whatever those map to for the object + in question). UNIX file permissions do not allow the arbitrary + specification of subjects, however, and so are of limited use. + + A Linux file might also sport a POSIX ACL. This is a list of rules + that grants various permissions to arbitrary subjects. + + (b) Mandatory access control (MAC): + + The system as a whole may have one or more sets of rules that get + applied to all subjects and objects, regardless of their source. + SELinux and Smack are examples of this. + + In the case of SELinux and Smack, each object is given a label as part + of its credentials. When an action is requested, they take the + subject label, the object label and the action and look for a rule + that says that this action is either granted or denied. + + +==================== +TYPES OF CREDENTIALS +==================== + +The Linux kernel supports the following types of credentials: + + (1) Traditional UNIX credentials. + + Real User ID + Real Group ID + + The UID and GID are carried by most, if not all, Linux objects, even if in + some cases it has to be invented (FAT or CIFS files for example, which are + derived from Windows). These (mostly) define the objective context of + that object, with tasks being slightly different in some cases. + + Effective, Saved and FS User ID + Effective, Saved and FS Group ID + Supplementary groups + + These are additional credentials used by tasks only. Usually, an + EUID/EGID/GROUPS will be used as the subjective context, and real UID/GID + will be used as the objective. For tasks, it should be noted that this is + not always true. + + (2) Capabilities. + + Set of permitted capabilities + Set of inheritable capabilities + Set of effective capabilities + Capability bounding set + + These are only carried by tasks. They indicate superior capabilities + granted piecemeal to a task that an ordinary task wouldn't otherwise have. + These are manipulated implicitly by changes to the traditional UNIX + credentials, but can also be manipulated directly by the capset() system + call. + + The permitted capabilities are those caps that the process might grant + itself to its effective or permitted sets through capset(). This + inheritable set might also be so constrained. + + The effective capabilities are the ones that a task is actually allowed to + make use of itself. + + The inheritable capabilities are the ones that may get passed across + execve(). + + The bounding set limits the capabilities that may be inherited across + execve(), especially when a binary is executed that will execute as UID 0. + + (3) Secure management flags (securebits). + + These are only carried by tasks. These govern the way the above + credentials are manipulated and inherited over certain operations such as + execve(). They aren't used directly as objective or subjective + credentials. + + (4) Keys and keyrings. + + These are only carried by tasks. They carry and cache security tokens + that don't fit into the other standard UNIX credentials. They are for + making such things as network filesystem keys available to the file + accesses performed by processes, without the necessity of ordinary + programs having to know about security details involved. + + Keyrings are a special type of key. They carry sets of other keys and can + be searched for the desired key. Each process may subscribe to a number + of keyrings: + + Per-thread keying + Per-process keyring + Per-session keyring + + When a process accesses a key, if not already present, it will normally be + cached on one of these keyrings for future accesses to find. + + For more information on using keys, see Documentation/security/keys.txt. + + (5) LSM + + The Linux Security Module allows extra controls to be placed over the + operations that a task may do. Currently Linux supports two main + alternate LSM options: SELinux and Smack. + + Both work by labelling the objects in a system and then applying sets of + rules (policies) that say what operations a task with one label may do to + an object with another label. + + (6) AF_KEY + + This is a socket-based approach to credential management for networking + stacks [RFC 2367]. It isn't discussed by this document as it doesn't + interact directly with task and file credentials; rather it keeps system + level credentials. + + +When a file is opened, part of the opening task's subjective context is +recorded in the file struct created. This allows operations using that file +struct to use those credentials instead of the subjective context of the task +that issued the operation. An example of this would be a file opened on a +network filesystem where the credentials of the opened file should be presented +to the server, regardless of who is actually doing a read or a write upon it. + + +============= +FILE MARKINGS +============= + +Files on disk or obtained over the network may have annotations that form the +objective security context of that file. Depending on the type of filesystem, +this may include one or more of the following: + + (*) UNIX UID, GID, mode; + + (*) Windows user ID; + + (*) Access control list; + + (*) LSM security label; + + (*) UNIX exec privilege escalation bits (SUID/SGID); + + (*) File capabilities exec privilege escalation bits. + +These are compared to the task's subjective security context, and certain +operations allowed or disallowed as a result. In the case of execve(), the +privilege escalation bits come into play, and may allow the resulting process +extra privileges, based on the annotations on the executable file. + + +================ +TASK CREDENTIALS +================ + +In Linux, all of a task's credentials are held in (uid, gid) or through +(groups, keys, LSM security) a refcounted structure of type 'struct cred'. +Each task points to its credentials by a pointer called 'cred' in its +task_struct. + +Once a set of credentials has been prepared and committed, it may not be +changed, barring the following exceptions: + + (1) its reference count may be changed; + + (2) the reference count on the group_info struct it points to may be changed; + + (3) the reference count on the security data it points to may be changed; + + (4) the reference count on any keyrings it points to may be changed; + + (5) any keyrings it points to may be revoked, expired or have their security + attributes changed; and + + (6) the contents of any keyrings to which it points may be changed (the whole + point of keyrings being a shared set of credentials, modifiable by anyone + with appropriate access). + +To alter anything in the cred struct, the copy-and-replace principle must be +adhered to. First take a copy, then alter the copy and then use RCU to change +the task pointer to make it point to the new copy. There are wrappers to aid +with this (see below). + +A task may only alter its _own_ credentials; it is no longer permitted for a +task to alter another's credentials. This means the capset() system call is no +longer permitted to take any PID other than the one of the current process. +Also keyctl_instantiate() and keyctl_negate() functions no longer permit +attachment to process-specific keyrings in the requesting process as the +instantiating process may need to create them. + + +IMMUTABLE CREDENTIALS +--------------------- + +Once a set of credentials has been made public (by calling commit_creds() for +example), it must be considered immutable, barring two exceptions: + + (1) The reference count may be altered. + + (2) Whilst the keyring subscriptions of a set of credentials may not be + changed, the keyrings subscribed to may have their contents altered. + +To catch accidental credential alteration at compile time, struct task_struct +has _const_ pointers to its credential sets, as does struct file. Furthermore, +certain functions such as get_cred() and put_cred() operate on const pointers, +thus rendering casts unnecessary, but require to temporarily ditch the const +qualification to be able to alter the reference count. + + +ACCESSING TASK CREDENTIALS +-------------------------- + +A task being able to alter only its own credentials permits the current process +to read or replace its own credentials without the need for any form of locking +- which simplifies things greatly. It can just call: + + const struct cred *current_cred() + +to get a pointer to its credentials structure, and it doesn't have to release +it afterwards. + +There are convenience wrappers for retrieving specific aspects of a task's +credentials (the value is simply returned in each case): + + uid_t current_uid(void) Current's real UID + gid_t current_gid(void) Current's real GID + uid_t current_euid(void) Current's effective UID + gid_t current_egid(void) Current's effective GID + uid_t current_fsuid(void) Current's file access UID + gid_t current_fsgid(void) Current's file access GID + kernel_cap_t current_cap(void) Current's effective capabilities + void *current_security(void) Current's LSM security pointer + struct user_struct *current_user(void) Current's user account + +There are also convenience wrappers for retrieving specific associated pairs of +a task's credentials: + + void current_uid_gid(uid_t *, gid_t *); + void current_euid_egid(uid_t *, gid_t *); + void current_fsuid_fsgid(uid_t *, gid_t *); + +which return these pairs of values through their arguments after retrieving +them from the current task's credentials. + + +In addition, there is a function for obtaining a reference on the current +process's current set of credentials: + + const struct cred *get_current_cred(void); + +and functions for getting references to one of the credentials that don't +actually live in struct cred: + + struct user_struct *get_current_user(void); + struct group_info *get_current_groups(void); + +which get references to the current process's user accounting structure and +supplementary groups list respectively. + +Once a reference has been obtained, it must be released with put_cred(), +free_uid() or put_group_info() as appropriate. + + +ACCESSING ANOTHER TASK'S CREDENTIALS +------------------------------------ + +Whilst a task may access its own credentials without the need for locking, the +same is not true of a task wanting to access another task's credentials. It +must use the RCU read lock and rcu_dereference(). + +The rcu_dereference() is wrapped by: + + const struct cred *__task_cred(struct task_struct *task); + +This should be used inside the RCU read lock, as in the following example: + + void foo(struct task_struct *t, struct foo_data *f) + { + const struct cred *tcred; + ... + rcu_read_lock(); + tcred = __task_cred(t); + f->uid = tcred->uid; + f->gid = tcred->gid; + f->groups = get_group_info(tcred->groups); + rcu_read_unlock(); + ... + } + +Should it be necessary to hold another task's credentials for a long period of +time, and possibly to sleep whilst doing so, then the caller should get a +reference on them using: + + const struct cred *get_task_cred(struct task_struct *task); + +This does all the RCU magic inside of it. The caller must call put_cred() on +the credentials so obtained when they're finished with. + + [*] Note: The result of __task_cred() should not be passed directly to + get_cred() as this may race with commit_cred(). + +There are a couple of convenience functions to access bits of another task's +credentials, hiding the RCU magic from the caller: + + uid_t task_uid(task) Task's real UID + uid_t task_euid(task) Task's effective UID + +If the caller is holding the RCU read lock at the time anyway, then: + + __task_cred(task)->uid + __task_cred(task)->euid + +should be used instead. Similarly, if multiple aspects of a task's credentials +need to be accessed, RCU read lock should be used, __task_cred() called, the +result stored in a temporary pointer and then the credential aspects called +from that before dropping the lock. This prevents the potentially expensive +RCU magic from being invoked multiple times. + +Should some other single aspect of another task's credentials need to be +accessed, then this can be used: + + task_cred_xxx(task, member) + +where 'member' is a non-pointer member of the cred struct. For instance: + + uid_t task_cred_xxx(task, suid); + +will retrieve 'struct cred::suid' from the task, doing the appropriate RCU +magic. This may not be used for pointer members as what they point to may +disappear the moment the RCU read lock is dropped. + + +ALTERING CREDENTIALS +-------------------- + +As previously mentioned, a task may only alter its own credentials, and may not +alter those of another task. This means that it doesn't need to use any +locking to alter its own credentials. + +To alter the current process's credentials, a function should first prepare a +new set of credentials by calling: + + struct cred *prepare_creds(void); + +this locks current->cred_replace_mutex and then allocates and constructs a +duplicate of the current process's credentials, returning with the mutex still +held if successful. It returns NULL if not successful (out of memory). + +The mutex prevents ptrace() from altering the ptrace state of a process whilst +security checks on credentials construction and changing is taking place as +the ptrace state may alter the outcome, particularly in the case of execve(). + +The new credentials set should be altered appropriately, and any security +checks and hooks done. Both the current and the proposed sets of credentials +are available for this purpose as current_cred() will return the current set +still at this point. + + +When the credential set is ready, it should be committed to the current process +by calling: + + int commit_creds(struct cred *new); + +This will alter various aspects of the credentials and the process, giving the +LSM a chance to do likewise, then it will use rcu_assign_pointer() to actually +commit the new credentials to current->cred, it will release +current->cred_replace_mutex to allow ptrace() to take place, and it will notify +the scheduler and others of the changes. + +This function is guaranteed to return 0, so that it can be tail-called at the +end of such functions as sys_setresuid(). + +Note that this function consumes the caller's reference to the new credentials. +The caller should _not_ call put_cred() on the new credentials afterwards. + +Furthermore, once this function has been called on a new set of credentials, +those credentials may _not_ be changed further. + + +Should the security checks fail or some other error occur after prepare_creds() +has been called, then the following function should be invoked: + + void abort_creds(struct cred *new); + +This releases the lock on current->cred_replace_mutex that prepare_creds() got +and then releases the new credentials. + + +A typical credentials alteration function would look something like this: + + int alter_suid(uid_t suid) + { + struct cred *new; + int ret; + + new = prepare_creds(); + if (!new) + return -ENOMEM; + + new->suid = suid; + ret = security_alter_suid(new); + if (ret < 0) { + abort_creds(new); + return ret; + } + + return commit_creds(new); + } + + +MANAGING CREDENTIALS +-------------------- + +There are some functions to help manage credentials: + + (*) void put_cred(const struct cred *cred); + + This releases a reference to the given set of credentials. If the + reference count reaches zero, the credentials will be scheduled for + destruction by the RCU system. + + (*) const struct cred *get_cred(const struct cred *cred); + + This gets a reference on a live set of credentials, returning a pointer to + that set of credentials. + + (*) struct cred *get_new_cred(struct cred *cred); + + This gets a reference on a set of credentials that is under construction + and is thus still mutable, returning a pointer to that set of credentials. + + +===================== +OPEN FILE CREDENTIALS +===================== + +When a new file is opened, a reference is obtained on the opening task's +credentials and this is attached to the file struct as 'f_cred' in place of +'f_uid' and 'f_gid'. Code that used to access file->f_uid and file->f_gid +should now access file->f_cred->fsuid and file->f_cred->fsgid. + +It is safe to access f_cred without the use of RCU or locking because the +pointer will not change over the lifetime of the file struct, and nor will the +contents of the cred struct pointed to, barring the exceptions listed above +(see the Task Credentials section). + + +======================================= +OVERRIDING THE VFS'S USE OF CREDENTIALS +======================================= + +Under some circumstances it is desirable to override the credentials used by +the VFS, and that can be done by calling into such as vfs_mkdir() with a +different set of credentials. This is done in the following places: + + (*) sys_faccessat(). + + (*) do_coredump(). + + (*) nfs4recover.c. diff --git a/Documentation/security/keys-request-key.txt b/Documentation/security/keys-request-key.txt new file mode 100644 index 000000000000..51987bfecfed --- /dev/null +++ b/Documentation/security/keys-request-key.txt @@ -0,0 +1,202 @@ + =================== + KEY REQUEST SERVICE + =================== + +The key request service is part of the key retention service (refer to +Documentation/security/keys.txt). This document explains more fully how +the requesting algorithm works. + +The process starts by either the kernel requesting a service by calling +request_key*(): + + struct key *request_key(const struct key_type *type, + const char *description, + const char *callout_info); + +or: + + struct key *request_key_with_auxdata(const struct key_type *type, + const char *description, + const char *callout_info, + size_t callout_len, + void *aux); + +or: + + struct key *request_key_async(const struct key_type *type, + const char *description, + const char *callout_info, + size_t callout_len); + +or: + + struct key *request_key_async_with_auxdata(const struct key_type *type, + const char *description, + const char *callout_info, + size_t callout_len, + void *aux); + +Or by userspace invoking the request_key system call: + + key_serial_t request_key(const char *type, + const char *description, + const char *callout_info, + key_serial_t dest_keyring); + +The main difference between the access points is that the in-kernel interface +does not need to link the key to a keyring to prevent it from being immediately +destroyed. The kernel interface returns a pointer directly to the key, and +it's up to the caller to destroy the key. + +The request_key*_with_auxdata() calls are like the in-kernel request_key*() +calls, except that they permit auxiliary data to be passed to the upcaller (the +default is NULL). This is only useful for those key types that define their +own upcall mechanism rather than using /sbin/request-key. + +The two async in-kernel calls may return keys that are still in the process of +being constructed. The two non-async ones will wait for construction to +complete first. + +The userspace interface links the key to a keyring associated with the process +to prevent the key from going away, and returns the serial number of the key to +the caller. + + +The following example assumes that the key types involved don't define their +own upcall mechanisms. If they do, then those should be substituted for the +forking and execution of /sbin/request-key. + + +=========== +THE PROCESS +=========== + +A request proceeds in the following manner: + + (1) Process A calls request_key() [the userspace syscall calls the kernel + interface]. + + (2) request_key() searches the process's subscribed keyrings to see if there's + a suitable key there. If there is, it returns the key. If there isn't, + and callout_info is not set, an error is returned. Otherwise the process + proceeds to the next step. + + (3) request_key() sees that A doesn't have the desired key yet, so it creates + two things: + + (a) An uninstantiated key U of requested type and description. + + (b) An authorisation key V that refers to key U and notes that process A + is the context in which key U should be instantiated and secured, and + from which associated key requests may be satisfied. + + (4) request_key() then forks and executes /sbin/request-key with a new session + keyring that contains a link to auth key V. + + (5) /sbin/request-key assumes the authority associated with key U. + + (6) /sbin/request-key execs an appropriate program to perform the actual + instantiation. + + (7) The program may want to access another key from A's context (say a + Kerberos TGT key). It just requests the appropriate key, and the keyring + search notes that the session keyring has auth key V in its bottom level. + + This will permit it to then search the keyrings of process A with the + UID, GID, groups and security info of process A as if it was process A, + and come up with key W. + + (8) The program then does what it must to get the data with which to + instantiate key U, using key W as a reference (perhaps it contacts a + Kerberos server using the TGT) and then instantiates key U. + + (9) Upon instantiating key U, auth key V is automatically revoked so that it + may not be used again. + +(10) The program then exits 0 and request_key() deletes key V and returns key + U to the caller. + +This also extends further. If key W (step 7 above) didn't exist, key W would +be created uninstantiated, another auth key (X) would be created (as per step +3) and another copy of /sbin/request-key spawned (as per step 4); but the +context specified by auth key X will still be process A, as it was in auth key +V. + +This is because process A's keyrings can't simply be attached to +/sbin/request-key at the appropriate places because (a) execve will discard two +of them, and (b) it requires the same UID/GID/Groups all the way through. + + +==================================== +NEGATIVE INSTANTIATION AND REJECTION +==================================== + +Rather than instantiating a key, it is possible for the possessor of an +authorisation key to negatively instantiate a key that's under construction. +This is a short duration placeholder that causes any attempt at re-requesting +the key whilst it exists to fail with error ENOKEY if negated or the specified +error if rejected. + +This is provided to prevent excessive repeated spawning of /sbin/request-key +processes for a key that will never be obtainable. + +Should the /sbin/request-key process exit anything other than 0 or die on a +signal, the key under construction will be automatically negatively +instantiated for a short amount of time. + + +==================== +THE SEARCH ALGORITHM +==================== + +A search of any particular keyring proceeds in the following fashion: + + (1) When the key management code searches for a key (keyring_search_aux) it + firstly calls key_permission(SEARCH) on the keyring it's starting with, + if this denies permission, it doesn't search further. + + (2) It considers all the non-keyring keys within that keyring and, if any key + matches the criteria specified, calls key_permission(SEARCH) on it to see + if the key is allowed to be found. If it is, that key is returned; if + not, the search continues, and the error code is retained if of higher + priority than the one currently set. + + (3) It then considers all the keyring-type keys in the keyring it's currently + searching. It calls key_permission(SEARCH) on each keyring, and if this + grants permission, it recurses, executing steps (2) and (3) on that + keyring. + +The process stops immediately a valid key is found with permission granted to +use it. Any error from a previous match attempt is discarded and the key is +returned. + +When search_process_keyrings() is invoked, it performs the following searches +until one succeeds: + + (1) If extant, the process's thread keyring is searched. + + (2) If extant, the process's process keyring is searched. + + (3) The process's session keyring is searched. + + (4) If the process has assumed the authority associated with a request_key() + authorisation key then: + + (a) If extant, the calling process's thread keyring is searched. + + (b) If extant, the calling process's process keyring is searched. + + (c) The calling process's session keyring is searched. + +The moment one succeeds, all pending errors are discarded and the found key is +returned. + +Only if all these fail does the whole thing fail with the highest priority +error. Note that several errors may have come from LSM. + +The error priority is: + + EKEYREVOKED > EKEYEXPIRED > ENOKEY + +EACCES/EPERM are only returned on a direct search of a specific keyring where +the basal keyring does not grant Search permission. diff --git a/Documentation/security/keys-trusted-encrypted.txt b/Documentation/security/keys-trusted-encrypted.txt new file mode 100644 index 000000000000..8fb79bc1ac4b --- /dev/null +++ b/Documentation/security/keys-trusted-encrypted.txt @@ -0,0 +1,145 @@ + Trusted and Encrypted Keys + +Trusted and Encrypted Keys are two new key types added to the existing kernel +key ring service. Both of these new types are variable length symmetic keys, +and in both cases all keys are created in the kernel, and user space sees, +stores, and loads only encrypted blobs. Trusted Keys require the availability +of a Trusted Platform Module (TPM) chip for greater security, while Encrypted +Keys can be used on any system. All user level blobs, are displayed and loaded +in hex ascii for convenience, and are integrity verified. + +Trusted Keys use a TPM both to generate and to seal the keys. Keys are sealed +under a 2048 bit RSA key in the TPM, and optionally sealed to specified PCR +(integrity measurement) values, and only unsealed by the TPM, if PCRs and blob +integrity verifications match. A loaded Trusted Key can be updated with new +(future) PCR values, so keys are easily migrated to new pcr values, such as +when the kernel and initramfs are updated. The same key can have many saved +blobs under different PCR values, so multiple boots are easily supported. + +By default, trusted keys are sealed under the SRK, which has the default +authorization value (20 zeros). This can be set at takeownership time with the +trouser's utility: "tpm_takeownership -u -z". + +Usage: + keyctl add trusted name "new keylen [options]" ring + keyctl add trusted name "load hex_blob [pcrlock=pcrnum]" ring + keyctl update key "update [options]" + keyctl print keyid + + options: + keyhandle= ascii hex value of sealing key default 0x40000000 (SRK) + keyauth= ascii hex auth for sealing key default 0x00...i + (40 ascii zeros) + blobauth= ascii hex auth for sealed data default 0x00... + (40 ascii zeros) + blobauth= ascii hex auth for sealed data default 0x00... + (40 ascii zeros) + pcrinfo= ascii hex of PCR_INFO or PCR_INFO_LONG (no default) + pcrlock= pcr number to be extended to "lock" blob + migratable= 0|1 indicating permission to reseal to new PCR values, + default 1 (resealing allowed) + +"keyctl print" returns an ascii hex copy of the sealed key, which is in standard +TPM_STORED_DATA format. The key length for new keys are always in bytes. +Trusted Keys can be 32 - 128 bytes (256 - 1024 bits), the upper limit is to fit +within the 2048 bit SRK (RSA) keylength, with all necessary structure/padding. + +Encrypted keys do not depend on a TPM, and are faster, as they use AES for +encryption/decryption. New keys are created from kernel generated random +numbers, and are encrypted/decrypted using a specified 'master' key. The +'master' key can either be a trusted-key or user-key type. The main +disadvantage of encrypted keys is that if they are not rooted in a trusted key, +they are only as secure as the user key encrypting them. The master user key +should therefore be loaded in as secure a way as possible, preferably early in +boot. + +Usage: + keyctl add encrypted name "new key-type:master-key-name keylen" ring + keyctl add encrypted name "load hex_blob" ring + keyctl update keyid "update key-type:master-key-name" + +where 'key-type' is either 'trusted' or 'user'. + +Examples of trusted and encrypted key usage: + +Create and save a trusted key named "kmk" of length 32 bytes: + + $ keyctl add trusted kmk "new 32" @u + 440502848 + + $ keyctl show + Session Keyring + -3 --alswrv 500 500 keyring: _ses + 97833714 --alswrv 500 -1 \_ keyring: _uid.500 + 440502848 --alswrv 500 500 \_ trusted: kmk + + $ keyctl print 440502848 + 0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915 + 3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b + 27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722 + a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec + d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d + dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0 + f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b + e4a8aea2b607ec96931e6f4d4fe563ba + + $ keyctl pipe 440502848 > kmk.blob + +Load a trusted key from the saved blob: + + $ keyctl add trusted kmk "load `cat kmk.blob`" @u + 268728824 + + $ keyctl print 268728824 + 0101000000000000000001005d01b7e3f4a6be5709930f3b70a743cbb42e0cc95e18e915 + 3f60da455bbf1144ad12e4f92b452f966929f6105fd29ca28e4d4d5a031d068478bacb0b + 27351119f822911b0a11ba3d3498ba6a32e50dac7f32894dd890eb9ad578e4e292c83722 + a52e56a097e6a68b3f56f7a52ece0cdccba1eb62cad7d817f6dc58898b3ac15f36026fec + d568bd4a706cb60bb37be6d8f1240661199d640b66fb0fe3b079f97f450b9ef9c22c6d5d + dd379f0facd1cd020281dfa3c70ba21a3fa6fc2471dc6d13ecf8298b946f65345faa5ef0 + f1f8fff03ad0acb083725535636addb08d73dedb9832da198081e5deae84bfaf0409c22b + e4a8aea2b607ec96931e6f4d4fe563ba + +Reseal a trusted key under new pcr values: + + $ keyctl update 268728824 "update pcrinfo=`cat pcr.blob`" + $ keyctl print 268728824 + 010100000000002c0002800093c35a09b70fff26e7a98ae786c641e678ec6ffb6b46d805 + 77c8a6377aed9d3219c6dfec4b23ffe3000001005d37d472ac8a44023fbb3d18583a4f73 + d3a076c0858f6f1dcaa39ea0f119911ff03f5406df4f7f27f41da8d7194f45c9f4e00f2e + df449f266253aa3f52e55c53de147773e00f0f9aca86c64d94c95382265968c354c5eab4 + 9638c5ae99c89de1e0997242edfb0b501744e11ff9762dfd951cffd93227cc513384e7e6 + e782c29435c7ec2edafaa2f4c1fe6e7a781b59549ff5296371b42133777dcc5b8b971610 + 94bc67ede19e43ddb9dc2baacad374a36feaf0314d700af0a65c164b7082401740e489c9 + 7ef6a24defe4846104209bf0c3eced7fa1a672ed5b125fc9d8cd88b476a658a4434644ef + df8ae9a178e9f83ba9f08d10fa47e4226b98b0702f06b3b8 + +Create and save an encrypted key "evm" using the above trusted key "kmk": + + $ keyctl add encrypted evm "new trusted:kmk 32" @u + 159771175 + + $ keyctl print 159771175 + trusted:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b382dbbc55 + be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e024717c64 + 5972dcb82ab2dde83376d82b2e3c09ffc + + $ keyctl pipe 159771175 > evm.blob + +Load an encrypted key "evm" from saved blob: + + $ keyctl add encrypted evm "load `cat evm.blob`" @u + 831684262 + + $ keyctl print 831684262 + trusted:kmk 32 2375725ad57798846a9bbd240de8906f006e66c03af53b1b382dbbc55 + be2a44616e4959430436dc4f2a7a9659aa60bb4652aeb2120f149ed197c564e024717c64 + 5972dcb82ab2dde83376d82b2e3c09ffc + + +The initial consumer of trusted keys is EVM, which at boot time needs a high +quality symmetric key for HMAC protection of file metadata. The use of a +trusted key provides strong guarantees that the EVM key has not been +compromised by a user level problem, and when sealed to specific boot PCR +values, protects against boot and offline attacks. Other uses for trusted and +encrypted keys, such as for disk and file encryption are anticipated. diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt new file mode 100644 index 000000000000..4d75931d2d79 --- /dev/null +++ b/Documentation/security/keys.txt @@ -0,0 +1,1290 @@ + ============================ + KERNEL KEY RETENTION SERVICE + ============================ + +This service allows cryptographic keys, authentication tokens, cross-domain +user mappings, and similar to be cached in the kernel for the use of +filesystems and other kernel services. + +Keyrings are permitted; these are a special type of key that can hold links to +other keys. Processes each have three standard keyring subscriptions that a +kernel service can search for relevant keys. + +The key service can be configured on by enabling: + + "Security options"/"Enable access key retention support" (CONFIG_KEYS) + +This document has the following sections: + + - Key overview + - Key service overview + - Key access permissions + - SELinux support + - New procfs files + - Userspace system call interface + - Kernel services + - Notes on accessing payload contents + - Defining a key type + - Request-key callback service + - Garbage collection + + +============ +KEY OVERVIEW +============ + +In this context, keys represent units of cryptographic data, authentication +tokens, keyrings, etc.. These are represented in the kernel by struct key. + +Each key has a number of attributes: + + - A serial number. + - A type. + - A description (for matching a key in a search). + - Access control information. + - An expiry time. + - A payload. + - State. + + + (*) Each key is issued a serial number of type key_serial_t that is unique for + the lifetime of that key. All serial numbers are positive non-zero 32-bit + integers. + + Userspace programs can use a key's serial numbers as a way to gain access + to it, subject to permission checking. + + (*) Each key is of a defined "type". Types must be registered inside the + kernel by a kernel service (such as a filesystem) before keys of that type + can be added or used. Userspace programs cannot define new types directly. + + Key types are represented in the kernel by struct key_type. This defines a + number of operations that can be performed on a key of that type. + + Should a type be removed from the system, all the keys of that type will + be invalidated. + + (*) Each key has a description. This should be a printable string. The key + type provides an operation to perform a match between the description on a + key and a criterion string. + + (*) Each key has an owner user ID, a group ID and a permissions mask. These + are used to control what a process may do to a key from userspace, and + whether a kernel service will be able to find the key. + + (*) Each key can be set to expire at a specific time by the key type's + instantiation function. Keys can also be immortal. + + (*) Each key can have a payload. This is a quantity of data that represent the + actual "key". In the case of a keyring, this is a list of keys to which + the keyring links; in the case of a user-defined key, it's an arbitrary + blob of data. + + Having a payload is not required; and the payload can, in fact, just be a + value stored in the struct key itself. + + When a key is instantiated, the key type's instantiation function is + called with a blob of data, and that then creates the key's payload in + some way. + + Similarly, when userspace wants to read back the contents of the key, if + permitted, another key type operation will be called to convert the key's + attached payload back into a blob of data. + + (*) Each key can be in one of a number of basic states: + + (*) Uninstantiated. The key exists, but does not have any data attached. + Keys being requested from userspace will be in this state. + + (*) Instantiated. This is the normal state. The key is fully formed, and + has data attached. + + (*) Negative. This is a relatively short-lived state. The key acts as a + note saying that a previous call out to userspace failed, and acts as + a throttle on key lookups. A negative key can be updated to a normal + state. + + (*) Expired. Keys can have lifetimes set. If their lifetime is exceeded, + they traverse to this state. An expired key can be updated back to a + normal state. + + (*) Revoked. A key is put in this state by userspace action. It can't be + found or operated upon (apart from by unlinking it). + + (*) Dead. The key's type was unregistered, and so the key is now useless. + +Keys in the last three states are subject to garbage collection. See the +section on "Garbage collection". + + +==================== +KEY SERVICE OVERVIEW +==================== + +The key service provides a number of features besides keys: + + (*) The key service defines two special key types: + + (+) "keyring" + + Keyrings are special keys that contain a list of other keys. Keyring + lists can be modified using various system calls. Keyrings should not + be given a payload when created. + + (+) "user" + + A key of this type has a description and a payload that are arbitrary + blobs of data. These can be created, updated and read by userspace, + and aren't intended for use by kernel services. + + (*) Each process subscribes to three keyrings: a thread-specific keyring, a + process-specific keyring, and a session-specific keyring. + + The thread-specific keyring is discarded from the child when any sort of + clone, fork, vfork or execve occurs. A new keyring is created only when + required. + + The process-specific keyring is replaced with an empty one in the child on + clone, fork, vfork unless CLONE_THREAD is supplied, in which case it is + shared. execve also discards the process's process keyring and creates a + new one. + + The session-specific keyring is persistent across clone, fork, vfork and + execve, even when the latter executes a set-UID or set-GID binary. A + process can, however, replace its current session keyring with a new one + by using PR_JOIN_SESSION_KEYRING. It is permitted to request an anonymous + new one, or to attempt to create or join one of a specific name. + + The ownership of the thread keyring changes when the real UID and GID of + the thread changes. + + (*) Each user ID resident in the system holds two special keyrings: a user + specific keyring and a default user session keyring. The default session + keyring is initialised with a link to the user-specific keyring. + + When a process changes its real UID, if it used to have no session key, it + will be subscribed to the default session key for the new UID. + + If a process attempts to access its session key when it doesn't have one, + it will be subscribed to the default for its current UID. + + (*) Each user has two quotas against which the keys they own are tracked. One + limits the total number of keys and keyrings, the other limits the total + amount of description and payload space that can be consumed. + + The user can view information on this and other statistics through procfs + files. The root user may also alter the quota limits through sysctl files + (see the section "New procfs files"). + + Process-specific and thread-specific keyrings are not counted towards a + user's quota. + + If a system call that modifies a key or keyring in some way would put the + user over quota, the operation is refused and error EDQUOT is returned. + + (*) There's a system call interface by which userspace programs can create and + manipulate keys and keyrings. + + (*) There's a kernel interface by which services can register types and search + for keys. + + (*) There's a way for the a search done from the kernel to call back to + userspace to request a key that can't be found in a process's keyrings. + + (*) An optional filesystem is available through which the key database can be + viewed and manipulated. + + +====================== +KEY ACCESS PERMISSIONS +====================== + +Keys have an owner user ID, a group access ID, and a permissions mask. The mask +has up to eight bits each for possessor, user, group and other access. Only +six of each set of eight bits are defined. These permissions granted are: + + (*) View + + This permits a key or keyring's attributes to be viewed - including key + type and description. + + (*) Read + + This permits a key's payload to be viewed or a keyring's list of linked + keys. + + (*) Write + + This permits a key's payload to be instantiated or updated, or it allows a + link to be added to or removed from a keyring. + + (*) Search + + This permits keyrings to be searched and keys to be found. Searches can + only recurse into nested keyrings that have search permission set. + + (*) Link + + This permits a key or keyring to be linked to. To create a link from a + keyring to a key, a process must have Write permission on the keyring and + Link permission on the key. + + (*) Set Attribute + + This permits a key's UID, GID and permissions mask to be changed. + +For changing the ownership, group ID or permissions mask, being the owner of +the key or having the sysadmin capability is sufficient. + + +=============== +SELINUX SUPPORT +=============== + +The security class "key" has been added to SELinux so that mandatory access +controls can be applied to keys created within various contexts. This support +is preliminary, and is likely to change quite significantly in the near future. +Currently, all of the basic permissions explained above are provided in SELinux +as well; SELinux is simply invoked after all basic permission checks have been +performed. + +The value of the file /proc/self/attr/keycreate influences the labeling of +newly-created keys. If the contents of that file correspond to an SELinux +security context, then the key will be assigned that context. Otherwise, the +key will be assigned the current context of the task that invoked the key +creation request. Tasks must be granted explicit permission to assign a +particular context to newly-created keys, using the "create" permission in the +key security class. + +The default keyrings associated with users will be labeled with the default +context of the user if and only if the login programs have been instrumented to +properly initialize keycreate during the login process. Otherwise, they will +be labeled with the context of the login program itself. + +Note, however, that the default keyrings associated with the root user are +labeled with the default kernel context, since they are created early in the +boot process, before root has a chance to log in. + +The keyrings associated with new threads are each labeled with the context of +their associated thread, and both session and process keyrings are handled +similarly. + + +================ +NEW PROCFS FILES +================ + +Two files have been added to procfs by which an administrator can find out +about the status of the key service: + + (*) /proc/keys + + This lists the keys that are currently viewable by the task reading the + file, giving information about their type, description and permissions. + It is not possible to view the payload of the key this way, though some + information about it may be given. + + The only keys included in the list are those that grant View permission to + the reading process whether or not it possesses them. Note that LSM + security checks are still performed, and may further filter out keys that + the current process is not authorised to view. + + The contents of the file look like this: + + SERIAL FLAGS USAGE EXPY PERM UID GID TYPE DESCRIPTION: SUMMARY + 00000001 I----- 39 perm 1f3f0000 0 0 keyring _uid_ses.0: 1/4 + 00000002 I----- 2 perm 1f3f0000 0 0 keyring _uid.0: empty + 00000007 I----- 1 perm 1f3f0000 0 0 keyring _pid.1: empty + 0000018d I----- 1 perm 1f3f0000 0 0 keyring _pid.412: empty + 000004d2 I--Q-- 1 perm 1f3f0000 32 -1 keyring _uid.32: 1/4 + 000004d3 I--Q-- 3 perm 1f3f0000 32 -1 keyring _uid_ses.32: empty + 00000892 I--QU- 1 perm 1f000000 0 0 user metal:copper: 0 + 00000893 I--Q-N 1 35s 1f3f0000 0 0 user metal:silver: 0 + 00000894 I--Q-- 1 10h 003f0000 0 0 user metal:gold: 0 + + The flags are: + + I Instantiated + R Revoked + D Dead + Q Contributes to user's quota + U Under construction by callback to userspace + N Negative key + + This file must be enabled at kernel configuration time as it allows anyone + to list the keys database. + + (*) /proc/key-users + + This file lists the tracking data for each user that has at least one key + on the system. Such data includes quota information and statistics: + + [root@andromeda root]# cat /proc/key-users + 0: 46 45/45 1/100 13/10000 + 29: 2 2/2 2/100 40/10000 + 32: 2 2/2 2/100 40/10000 + 38: 2 2/2 2/100 40/10000 + + The format of each line is + : User ID to which this applies + Structure refcount + / Total number of keys and number instantiated + / Key count quota + / Key size quota + + +Four new sysctl files have been added also for the purpose of controlling the +quota limits on keys: + + (*) /proc/sys/kernel/keys/root_maxkeys + /proc/sys/kernel/keys/root_maxbytes + + These files hold the maximum number of keys that root may have and the + maximum total number of bytes of data that root may have stored in those + keys. + + (*) /proc/sys/kernel/keys/maxkeys + /proc/sys/kernel/keys/maxbytes + + These files hold the maximum number of keys that each non-root user may + have and the maximum total number of bytes of data that each of those + users may have stored in their keys. + +Root may alter these by writing each new limit as a decimal number string to +the appropriate file. + + +=============================== +USERSPACE SYSTEM CALL INTERFACE +=============================== + +Userspace can manipulate keys directly through three new syscalls: add_key, +request_key and keyctl. The latter provides a number of functions for +manipulating keys. + +When referring to a key directly, userspace programs should use the key's +serial number (a positive 32-bit integer). However, there are some special +values available for referring to special keys and keyrings that relate to the +process making the call: + + CONSTANT VALUE KEY REFERENCED + ============================== ====== =========================== + KEY_SPEC_THREAD_KEYRING -1 thread-specific keyring + KEY_SPEC_PROCESS_KEYRING -2 process-specific keyring + KEY_SPEC_SESSION_KEYRING -3 session-specific keyring + KEY_SPEC_USER_KEYRING -4 UID-specific keyring + KEY_SPEC_USER_SESSION_KEYRING -5 UID-session keyring + KEY_SPEC_GROUP_KEYRING -6 GID-specific keyring + KEY_SPEC_REQKEY_AUTH_KEY -7 assumed request_key() + authorisation key + + +The main syscalls are: + + (*) Create a new key of given type, description and payload and add it to the + nominated keyring: + + key_serial_t add_key(const char *type, const char *desc, + const void *payload, size_t plen, + key_serial_t keyring); + + If a key of the same type and description as that proposed already exists + in the keyring, this will try to update it with the given payload, or it + will return error EEXIST if that function is not supported by the key + type. The process must also have permission to write to the key to be able + to update it. The new key will have all user permissions granted and no + group or third party permissions. + + Otherwise, this will attempt to create a new key of the specified type and + description, and to instantiate it with the supplied payload and attach it + to the keyring. In this case, an error will be generated if the process + does not have permission to write to the keyring. + + The payload is optional, and the pointer can be NULL if not required by + the type. The payload is plen in size, and plen can be zero for an empty + payload. + + A new keyring can be generated by setting type "keyring", the keyring name + as the description (or NULL) and setting the payload to NULL. + + User defined keys can be created by specifying type "user". It is + recommended that a user defined key's description by prefixed with a type + ID and a colon, such as "krb5tgt:" for a Kerberos 5 ticket granting + ticket. + + Any other type must have been registered with the kernel in advance by a + kernel service such as a filesystem. + + The ID of the new or updated key is returned if successful. + + + (*) Search the process's keyrings for a key, potentially calling out to + userspace to create it. + + key_serial_t request_key(const char *type, const char *description, + const char *callout_info, + key_serial_t dest_keyring); + + This function searches all the process's keyrings in the order thread, + process, session for a matching key. This works very much like + KEYCTL_SEARCH, including the optional attachment of the discovered key to + a keyring. + + If a key cannot be found, and if callout_info is not NULL, then + /sbin/request-key will be invoked in an attempt to obtain a key. The + callout_info string will be passed as an argument to the program. + + See also Documentation/security/keys-request-key.txt. + + +The keyctl syscall functions are: + + (*) Map a special key ID to a real key ID for this process: + + key_serial_t keyctl(KEYCTL_GET_KEYRING_ID, key_serial_t id, + int create); + + The special key specified by "id" is looked up (with the key being created + if necessary) and the ID of the key or keyring thus found is returned if + it exists. + + If the key does not yet exist, the key will be created if "create" is + non-zero; and the error ENOKEY will be returned if "create" is zero. + + + (*) Replace the session keyring this process subscribes to with a new one: + + key_serial_t keyctl(KEYCTL_JOIN_SESSION_KEYRING, const char *name); + + If name is NULL, an anonymous keyring is created attached to the process + as its session keyring, displacing the old session keyring. + + If name is not NULL, if a keyring of that name exists, the process + attempts to attach it as the session keyring, returning an error if that + is not permitted; otherwise a new keyring of that name is created and + attached as the session keyring. + + To attach to a named keyring, the keyring must have search permission for + the process's ownership. + + The ID of the new session keyring is returned if successful. + + + (*) Update the specified key: + + long keyctl(KEYCTL_UPDATE, key_serial_t key, const void *payload, + size_t plen); + + This will try to update the specified key with the given payload, or it + will return error EOPNOTSUPP if that function is not supported by the key + type. The process must also have permission to write to the key to be able + to update it. + + The payload is of length plen, and may be absent or empty as for + add_key(). + + + (*) Revoke a key: + + long keyctl(KEYCTL_REVOKE, key_serial_t key); + + This makes a key unavailable for further operations. Further attempts to + use the key will be met with error EKEYREVOKED, and the key will no longer + be findable. + + + (*) Change the ownership of a key: + + long keyctl(KEYCTL_CHOWN, key_serial_t key, uid_t uid, gid_t gid); + + This function permits a key's owner and group ID to be changed. Either one + of uid or gid can be set to -1 to suppress that change. + + Only the superuser can change a key's owner to something other than the + key's current owner. Similarly, only the superuser can change a key's + group ID to something other than the calling process's group ID or one of + its group list members. + + + (*) Change the permissions mask on a key: + + long keyctl(KEYCTL_SETPERM, key_serial_t key, key_perm_t perm); + + This function permits the owner of a key or the superuser to change the + permissions mask on a key. + + Only bits the available bits are permitted; if any other bits are set, + error EINVAL will be returned. + + + (*) Describe a key: + + long keyctl(KEYCTL_DESCRIBE, key_serial_t key, char *buffer, + size_t buflen); + + This function returns a summary of the key's attributes (but not its + payload data) as a string in the buffer provided. + + Unless there's an error, it always returns the amount of data it could + produce, even if that's too big for the buffer, but it won't copy more + than requested to userspace. If the buffer pointer is NULL then no copy + will take place. + + A process must have view permission on the key for this function to be + successful. + + If successful, a string is placed in the buffer in the following format: + + ;;;; + + Where type and description are strings, uid and gid are decimal, and perm + is hexadecimal. A NUL character is included at the end of the string if + the buffer is sufficiently big. + + This can be parsed with + + sscanf(buffer, "%[^;];%d;%d;%o;%s", type, &uid, &gid, &mode, desc); + + + (*) Clear out a keyring: + + long keyctl(KEYCTL_CLEAR, key_serial_t keyring); + + This function clears the list of keys attached to a keyring. The calling + process must have write permission on the keyring, and it must be a + keyring (or else error ENOTDIR will result). + + + (*) Link a key into a keyring: + + long keyctl(KEYCTL_LINK, key_serial_t keyring, key_serial_t key); + + This function creates a link from the keyring to the key. The process must + have write permission on the keyring and must have link permission on the + key. + + Should the keyring not be a keyring, error ENOTDIR will result; and if the + keyring is full, error ENFILE will result. + + The link procedure checks the nesting of the keyrings, returning ELOOP if + it appears too deep or EDEADLK if the link would introduce a cycle. + + Any links within the keyring to keys that match the new key in terms of + type and description will be discarded from the keyring as the new one is + added. + + + (*) Unlink a key or keyring from another keyring: + + long keyctl(KEYCTL_UNLINK, key_serial_t keyring, key_serial_t key); + + This function looks through the keyring for the first link to the + specified key, and removes it if found. Subsequent links to that key are + ignored. The process must have write permission on the keyring. + + If the keyring is not a keyring, error ENOTDIR will result; and if the key + is not present, error ENOENT will be the result. + + + (*) Search a keyring tree for a key: + + key_serial_t keyctl(KEYCTL_SEARCH, key_serial_t keyring, + const char *type, const char *description, + key_serial_t dest_keyring); + + This searches the keyring tree headed by the specified keyring until a key + is found that matches the type and description criteria. Each keyring is + checked for keys before recursion into its children occurs. + + The process must have search permission on the top level keyring, or else + error EACCES will result. Only keyrings that the process has search + permission on will be recursed into, and only keys and keyrings for which + a process has search permission can be matched. If the specified keyring + is not a keyring, ENOTDIR will result. + + If the search succeeds, the function will attempt to link the found key + into the destination keyring if one is supplied (non-zero ID). All the + constraints applicable to KEYCTL_LINK apply in this case too. + + Error ENOKEY, EKEYREVOKED or EKEYEXPIRED will be returned if the search + fails. On success, the resulting key ID will be returned. + + + (*) Read the payload data from a key: + + long keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer, + size_t buflen); + + This function attempts to read the payload data from the specified key + into the buffer. The process must have read permission on the key to + succeed. + + The returned data will be processed for presentation by the key type. For + instance, a keyring will return an array of key_serial_t entries + representing the IDs of all the keys to which it is subscribed. The user + defined key type will return its data as is. If a key type does not + implement this function, error EOPNOTSUPP will result. + + As much of the data as can be fitted into the buffer will be copied to + userspace if the buffer pointer is not NULL. + + On a successful return, the function will always return the amount of data + available rather than the amount copied. + + + (*) Instantiate a partially constructed key. + + long keyctl(KEYCTL_INSTANTIATE, key_serial_t key, + const void *payload, size_t plen, + key_serial_t keyring); + long keyctl(KEYCTL_INSTANTIATE_IOV, key_serial_t key, + const struct iovec *payload_iov, unsigned ioc, + key_serial_t keyring); + + If the kernel calls back to userspace to complete the instantiation of a + key, userspace should use this call to supply data for the key before the + invoked process returns, or else the key will be marked negative + automatically. + + The process must have write access on the key to be able to instantiate + it, and the key must be uninstantiated. + + If a keyring is specified (non-zero), the key will also be linked into + that keyring, however all the constraints applying in KEYCTL_LINK apply in + this case too. + + The payload and plen arguments describe the payload data as for add_key(). + + The payload_iov and ioc arguments describe the payload data in an iovec + array instead of a single buffer. + + + (*) Negatively instantiate a partially constructed key. + + long keyctl(KEYCTL_NEGATE, key_serial_t key, + unsigned timeout, key_serial_t keyring); + long keyctl(KEYCTL_REJECT, key_serial_t key, + unsigned timeout, unsigned error, key_serial_t keyring); + + If the kernel calls back to userspace to complete the instantiation of a + key, userspace should use this call mark the key as negative before the + invoked process returns if it is unable to fulfil the request. + + The process must have write access on the key to be able to instantiate + it, and the key must be uninstantiated. + + If a keyring is specified (non-zero), the key will also be linked into + that keyring, however all the constraints applying in KEYCTL_LINK apply in + this case too. + + If the key is rejected, future searches for it will return the specified + error code until the rejected key expires. Negating the key is the same + as rejecting the key with ENOKEY as the error code. + + + (*) Set the default request-key destination keyring. + + long keyctl(KEYCTL_SET_REQKEY_KEYRING, int reqkey_defl); + + This sets the default keyring to which implicitly requested keys will be + attached for this thread. reqkey_defl should be one of these constants: + + CONSTANT VALUE NEW DEFAULT KEYRING + ====================================== ====== ======================= + KEY_REQKEY_DEFL_NO_CHANGE -1 No change + KEY_REQKEY_DEFL_DEFAULT 0 Default[1] + KEY_REQKEY_DEFL_THREAD_KEYRING 1 Thread keyring + KEY_REQKEY_DEFL_PROCESS_KEYRING 2 Process keyring + KEY_REQKEY_DEFL_SESSION_KEYRING 3 Session keyring + KEY_REQKEY_DEFL_USER_KEYRING 4 User keyring + KEY_REQKEY_DEFL_USER_SESSION_KEYRING 5 User session keyring + KEY_REQKEY_DEFL_GROUP_KEYRING 6 Group keyring + + The old default will be returned if successful and error EINVAL will be + returned if reqkey_defl is not one of the above values. + + The default keyring can be overridden by the keyring indicated to the + request_key() system call. + + Note that this setting is inherited across fork/exec. + + [1] The default is: the thread keyring if there is one, otherwise + the process keyring if there is one, otherwise the session keyring if + there is one, otherwise the user default session keyring. + + + (*) Set the timeout on a key. + + long keyctl(KEYCTL_SET_TIMEOUT, key_serial_t key, unsigned timeout); + + This sets or clears the timeout on a key. The timeout can be 0 to clear + the timeout or a number of seconds to set the expiry time that far into + the future. + + The process must have attribute modification access on a key to set its + timeout. Timeouts may not be set with this function on negative, revoked + or expired keys. + + + (*) Assume the authority granted to instantiate a key + + long keyctl(KEYCTL_ASSUME_AUTHORITY, key_serial_t key); + + This assumes or divests the authority required to instantiate the + specified key. Authority can only be assumed if the thread has the + authorisation key associated with the specified key in its keyrings + somewhere. + + Once authority is assumed, searches for keys will also search the + requester's keyrings using the requester's security label, UID, GID and + groups. + + If the requested authority is unavailable, error EPERM will be returned, + likewise if the authority has been revoked because the target key is + already instantiated. + + If the specified key is 0, then any assumed authority will be divested. + + The assumed authoritative key is inherited across fork and exec. + + + (*) Get the LSM security context attached to a key. + + long keyctl(KEYCTL_GET_SECURITY, key_serial_t key, char *buffer, + size_t buflen) + + This function returns a string that represents the LSM security context + attached to a key in the buffer provided. + + Unless there's an error, it always returns the amount of data it could + produce, even if that's too big for the buffer, but it won't copy more + than requested to userspace. If the buffer pointer is NULL then no copy + will take place. + + A NUL character is included at the end of the string if the buffer is + sufficiently big. This is included in the returned count. If no LSM is + in force then an empty string will be returned. + + A process must have view permission on the key for this function to be + successful. + + + (*) Install the calling process's session keyring on its parent. + + long keyctl(KEYCTL_SESSION_TO_PARENT); + + This functions attempts to install the calling process's session keyring + on to the calling process's parent, replacing the parent's current session + keyring. + + The calling process must have the same ownership as its parent, the + keyring must have the same ownership as the calling process, the calling + process must have LINK permission on the keyring and the active LSM module + mustn't deny permission, otherwise error EPERM will be returned. + + Error ENOMEM will be returned if there was insufficient memory to complete + the operation, otherwise 0 will be returned to indicate success. + + The keyring will be replaced next time the parent process leaves the + kernel and resumes executing userspace. + + +=============== +KERNEL SERVICES +=============== + +The kernel services for key management are fairly simple to deal with. They can +be broken down into two areas: keys and key types. + +Dealing with keys is fairly straightforward. Firstly, the kernel service +registers its type, then it searches for a key of that type. It should retain +the key as long as it has need of it, and then it should release it. For a +filesystem or device file, a search would probably be performed during the open +call, and the key released upon close. How to deal with conflicting keys due to +two different users opening the same file is left to the filesystem author to +solve. + +To access the key manager, the following header must be #included: + + + +Specific key types should have a header file under include/keys/ that should be +used to access that type. For keys of type "user", for example, that would be: + + + +Note that there are two different types of pointers to keys that may be +encountered: + + (*) struct key * + + This simply points to the key structure itself. Key structures will be at + least four-byte aligned. + + (*) key_ref_t + + This is equivalent to a struct key *, but the least significant bit is set + if the caller "possesses" the key. By "possession" it is meant that the + calling processes has a searchable link to the key from one of its + keyrings. There are three functions for dealing with these: + + key_ref_t make_key_ref(const struct key *key, + unsigned long possession); + + struct key *key_ref_to_ptr(const key_ref_t key_ref); + + unsigned long is_key_possessed(const key_ref_t key_ref); + + The first function constructs a key reference from a key pointer and + possession information (which must be 0 or 1 and not any other value). + + The second function retrieves the key pointer from a reference and the + third retrieves the possession flag. + +When accessing a key's payload contents, certain precautions must be taken to +prevent access vs modification races. See the section "Notes on accessing +payload contents" for more information. + +(*) To search for a key, call: + + struct key *request_key(const struct key_type *type, + const char *description, + const char *callout_info); + + This is used to request a key or keyring with a description that matches + the description specified according to the key type's match function. This + permits approximate matching to occur. If callout_string is not NULL, then + /sbin/request-key will be invoked in an attempt to obtain the key from + userspace. In that case, callout_string will be passed as an argument to + the program. + + Should the function fail error ENOKEY, EKEYEXPIRED or EKEYREVOKED will be + returned. + + If successful, the key will have been attached to the default keyring for + implicitly obtained request-key keys, as set by KEYCTL_SET_REQKEY_KEYRING. + + See also Documentation/security/keys-request-key.txt. + + +(*) To search for a key, passing auxiliary data to the upcaller, call: + + struct key *request_key_with_auxdata(const struct key_type *type, + const char *description, + const void *callout_info, + size_t callout_len, + void *aux); + + This is identical to request_key(), except that the auxiliary data is + passed to the key_type->request_key() op if it exists, and the callout_info + is a blob of length callout_len, if given (the length may be 0). + + +(*) A key can be requested asynchronously by calling one of: + + struct key *request_key_async(const struct key_type *type, + const char *description, + const void *callout_info, + size_t callout_len); + + or: + + struct key *request_key_async_with_auxdata(const struct key_type *type, + const char *description, + const char *callout_info, + size_t callout_len, + void *aux); + + which are asynchronous equivalents of request_key() and + request_key_with_auxdata() respectively. + + These two functions return with the key potentially still under + construction. To wait for construction completion, the following should be + called: + + int wait_for_key_construction(struct key *key, bool intr); + + The function will wait for the key to finish being constructed and then + invokes key_validate() to return an appropriate value to indicate the state + of the key (0 indicates the key is usable). + + If intr is true, then the wait can be interrupted by a signal, in which + case error ERESTARTSYS will be returned. + + +(*) When it is no longer required, the key should be released using: + + void key_put(struct key *key); + + Or: + + void key_ref_put(key_ref_t key_ref); + + These can be called from interrupt context. If CONFIG_KEYS is not set then + the argument will not be parsed. + + +(*) Extra references can be made to a key by calling the following function: + + struct key *key_get(struct key *key); + + These need to be disposed of by calling key_put() when they've been + finished with. The key pointer passed in will be returned. If the pointer + is NULL or CONFIG_KEYS is not set then the key will not be dereferenced and + no increment will take place. + + +(*) A key's serial number can be obtained by calling: + + key_serial_t key_serial(struct key *key); + + If key is NULL or if CONFIG_KEYS is not set then 0 will be returned (in the + latter case without parsing the argument). + + +(*) If a keyring was found in the search, this can be further searched by: + + key_ref_t keyring_search(key_ref_t keyring_ref, + const struct key_type *type, + const char *description) + + This searches the keyring tree specified for a matching key. Error ENOKEY + is returned upon failure (use IS_ERR/PTR_ERR to determine). If successful, + the returned key will need to be released. + + The possession attribute from the keyring reference is used to control + access through the permissions mask and is propagated to the returned key + reference pointer if successful. + + +(*) To check the validity of a key, this function can be called: + + int validate_key(struct key *key); + + This checks that the key in question hasn't expired or and hasn't been + revoked. Should the key be invalid, error EKEYEXPIRED or EKEYREVOKED will + be returned. If the key is NULL or if CONFIG_KEYS is not set then 0 will be + returned (in the latter case without parsing the argument). + + +(*) To register a key type, the following function should be called: + + int register_key_type(struct key_type *type); + + This will return error EEXIST if a type of the same name is already + present. + + +(*) To unregister a key type, call: + + void unregister_key_type(struct key_type *type); + + +Under some circumstances, it may be desirable to deal with a bundle of keys. +The facility provides access to the keyring type for managing such a bundle: + + struct key_type key_type_keyring; + +This can be used with a function such as request_key() to find a specific +keyring in a process's keyrings. A keyring thus found can then be searched +with keyring_search(). Note that it is not possible to use request_key() to +search a specific keyring, so using keyrings in this way is of limited utility. + + +=================================== +NOTES ON ACCESSING PAYLOAD CONTENTS +=================================== + +The simplest payload is just a number in key->payload.value. In this case, +there's no need to indulge in RCU or locking when accessing the payload. + +More complex payload contents must be allocated and a pointer to them set in +key->payload.data. One of the following ways must be selected to access the +data: + + (1) Unmodifiable key type. + + If the key type does not have a modify method, then the key's payload can + be accessed without any form of locking, provided that it's known to be + instantiated (uninstantiated keys cannot be "found"). + + (2) The key's semaphore. + + The semaphore could be used to govern access to the payload and to control + the payload pointer. It must be write-locked for modifications and would + have to be read-locked for general access. The disadvantage of doing this + is that the accessor may be required to sleep. + + (3) RCU. + + RCU must be used when the semaphore isn't already held; if the semaphore + is held then the contents can't change under you unexpectedly as the + semaphore must still be used to serialise modifications to the key. The + key management code takes care of this for the key type. + + However, this means using: + + rcu_read_lock() ... rcu_dereference() ... rcu_read_unlock() + + to read the pointer, and: + + rcu_dereference() ... rcu_assign_pointer() ... call_rcu() + + to set the pointer and dispose of the old contents after a grace period. + Note that only the key type should ever modify a key's payload. + + Furthermore, an RCU controlled payload must hold a struct rcu_head for the + use of call_rcu() and, if the payload is of variable size, the length of + the payload. key->datalen cannot be relied upon to be consistent with the + payload just dereferenced if the key's semaphore is not held. + + +=================== +DEFINING A KEY TYPE +=================== + +A kernel service may want to define its own key type. For instance, an AFS +filesystem might want to define a Kerberos 5 ticket key type. To do this, it +author fills in a key_type struct and registers it with the system. + +Source files that implement key types should include the following header file: + + + +The structure has a number of fields, some of which are mandatory: + + (*) const char *name + + The name of the key type. This is used to translate a key type name + supplied by userspace into a pointer to the structure. + + + (*) size_t def_datalen + + This is optional - it supplies the default payload data length as + contributed to the quota. If the key type's payload is always or almost + always the same size, then this is a more efficient way to do things. + + The data length (and quota) on a particular key can always be changed + during instantiation or update by calling: + + int key_payload_reserve(struct key *key, size_t datalen); + + With the revised data length. Error EDQUOT will be returned if this is not + viable. + + + (*) int (*vet_description)(const char *description); + + This optional method is called to vet a key description. If the key type + doesn't approve of the key description, it may return an error, otherwise + it should return 0. + + + (*) int (*instantiate)(struct key *key, const void *data, size_t datalen); + + This method is called to attach a payload to a key during construction. + The payload attached need not bear any relation to the data passed to this + function. + + If the amount of data attached to the key differs from the size in + keytype->def_datalen, then key_payload_reserve() should be called. + + This method does not have to lock the key in order to attach a payload. + The fact that KEY_FLAG_INSTANTIATED is not set in key->flags prevents + anything else from gaining access to the key. + + It is safe to sleep in this method. + + + (*) int (*update)(struct key *key, const void *data, size_t datalen); + + If this type of key can be updated, then this method should be provided. + It is called to update a key's payload from the blob of data provided. + + key_payload_reserve() should be called if the data length might change + before any changes are actually made. Note that if this succeeds, the type + is committed to changing the key because it's already been altered, so all + memory allocation must be done first. + + The key will have its semaphore write-locked before this method is called, + but this only deters other writers; any changes to the key's payload must + be made under RCU conditions, and call_rcu() must be used to dispose of + the old payload. + + key_payload_reserve() should be called before the changes are made, but + after all allocations and other potentially failing function calls are + made. + + It is safe to sleep in this method. + + + (*) int (*match)(const struct key *key, const void *desc); + + This method is called to match a key against a description. It should + return non-zero if the two match, zero if they don't. + + This method should not need to lock the key in any way. The type and + description can be considered invariant, and the payload should not be + accessed (the key may not yet be instantiated). + + It is not safe to sleep in this method; the caller may hold spinlocks. + + + (*) void (*revoke)(struct key *key); + + This method is optional. It is called to discard part of the payload + data upon a key being revoked. The caller will have the key semaphore + write-locked. + + It is safe to sleep in this method, though care should be taken to avoid + a deadlock against the key semaphore. + + + (*) void (*destroy)(struct key *key); + + This method is optional. It is called to discard the payload data on a key + when it is being destroyed. + + This method does not need to lock the key to access the payload; it can + consider the key as being inaccessible at this time. Note that the key's + type may have been changed before this function is called. + + It is not safe to sleep in this method; the caller may hold spinlocks. + + + (*) void (*describe)(const struct key *key, struct seq_file *p); + + This method is optional. It is called during /proc/keys reading to + summarise a key's description and payload in text form. + + This method will be called with the RCU read lock held. rcu_dereference() + should be used to read the payload pointer if the payload is to be + accessed. key->datalen cannot be trusted to stay consistent with the + contents of the payload. + + The description will not change, though the key's state may. + + It is not safe to sleep in this method; the RCU read lock is held by the + caller. + + + (*) long (*read)(const struct key *key, char __user *buffer, size_t buflen); + + This method is optional. It is called by KEYCTL_READ to translate the + key's payload into something a blob of data for userspace to deal with. + Ideally, the blob should be in the same format as that passed in to the + instantiate and update methods. + + If successful, the blob size that could be produced should be returned + rather than the size copied. + + This method will be called with the key's semaphore read-locked. This will + prevent the key's payload changing. It is not necessary to use RCU locking + when accessing the key's payload. It is safe to sleep in this method, such + as might happen when the userspace buffer is accessed. + + + (*) int (*request_key)(struct key_construction *cons, const char *op, + void *aux); + + This method is optional. If provided, request_key() and friends will + invoke this function rather than upcalling to /sbin/request-key to operate + upon a key of this type. + + The aux parameter is as passed to request_key_async_with_auxdata() and + similar or is NULL otherwise. Also passed are the construction record for + the key to be operated upon and the operation type (currently only + "create"). + + This method is permitted to return before the upcall is complete, but the + following function must be called under all circumstances to complete the + instantiation process, whether or not it succeeds, whether or not there's + an error: + + void complete_request_key(struct key_construction *cons, int error); + + The error parameter should be 0 on success, -ve on error. The + construction record is destroyed by this action and the authorisation key + will be revoked. If an error is indicated, the key under construction + will be negatively instantiated if it wasn't already instantiated. + + If this method returns an error, that error will be returned to the + caller of request_key*(). complete_request_key() must be called prior to + returning. + + The key under construction and the authorisation key can be found in the + key_construction struct pointed to by cons: + + (*) struct key *key; + + The key under construction. + + (*) struct key *authkey; + + The authorisation key. + + +============================ +REQUEST-KEY CALLBACK SERVICE +============================ + +To create a new key, the kernel will attempt to execute the following command +line: + + /sbin/request-key create \ + + + is the key being constructed, and the three keyrings are the process +keyrings from the process that caused the search to be issued. These are +included for two reasons: + + (1) There may be an authentication token in one of the keyrings that is + required to obtain the key, eg: a Kerberos Ticket-Granting Ticket. + + (2) The new key should probably be cached in one of these rings. + +This program should set it UID and GID to those specified before attempting to +access any more keys. It may then look around for a user specific process to +hand the request off to (perhaps a path held in placed in another key by, for +example, the KDE desktop manager). + +The program (or whatever it calls) should finish construction of the key by +calling KEYCTL_INSTANTIATE or KEYCTL_INSTANTIATE_IOV, which also permits it to +cache the key in one of the keyrings (probably the session ring) before +returning. Alternatively, the key can be marked as negative with KEYCTL_NEGATE +or KEYCTL_REJECT; this also permits the key to be cached in one of the +keyrings. + +If it returns with the key remaining in the unconstructed state, the key will +be marked as being negative, it will be added to the session keyring, and an +error will be returned to the key requestor. + +Supplementary information may be provided from whoever or whatever invoked this +service. This will be passed as the parameter. If no such +information was made available, then "-" will be passed as this parameter +instead. + + +Similarly, the kernel may attempt to update an expired or a soon to expire key +by executing: + + /sbin/request-key update \ + + +In this case, the program isn't required to actually attach the key to a ring; +the rings are provided for reference. + + +================== +GARBAGE COLLECTION +================== + +Dead keys (for which the type has been removed) will be automatically unlinked +from those keyrings that point to them and deleted as soon as possible by a +background garbage collector. + +Similarly, revoked and expired keys will be garbage collected, but only after a +certain amount of time has passed. This time is set as a number of seconds in: + + /proc/sys/kernel/keys/gc_delay diff --git a/Documentation/security/tomoyo.txt b/Documentation/security/tomoyo.txt new file mode 100644 index 000000000000..200a2d37cbc8 --- /dev/null +++ b/Documentation/security/tomoyo.txt @@ -0,0 +1,55 @@ +--- What is TOMOYO? --- + +TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel. + +LiveCD-based tutorials are available at +http://tomoyo.sourceforge.jp/1.7/1st-step/ubuntu10.04-live/ +http://tomoyo.sourceforge.jp/1.7/1st-step/centos5-live/ . +Though these tutorials use non-LSM version of TOMOYO, they are useful for you +to know what TOMOYO is. + +--- How to enable TOMOYO? --- + +Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on +kernel's command line. + +Please see http://tomoyo.sourceforge.jp/2.3/ for details. + +--- Where is documentation? --- + +User <-> Kernel interface documentation is available at +http://tomoyo.sourceforge.jp/2.3/policy-reference.html . + +Materials we prepared for seminars and symposiums are available at +http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 . +Below lists are chosen from three aspects. + +What is TOMOYO? + TOMOYO Linux Overview + http://sourceforge.jp/projects/tomoyo/docs/lca2009-takeda.pdf + TOMOYO Linux: pragmatic and manageable security for Linux + http://sourceforge.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf + TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box + http://sourceforge.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf + +What can TOMOYO do? + Deep inside TOMOYO Linux + http://sourceforge.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf + The role of "pathname based access control" in security. + http://sourceforge.jp/projects/tomoyo/docs/lfj2008-bof.pdf + +History of TOMOYO? + Realities of Mainlining + http://sourceforge.jp/projects/tomoyo/docs/lfj2008.pdf + +--- What is future plan? --- + +We believe that inode based security and name based security are complementary +and both should be used together. But unfortunately, so far, we cannot enable +multiple LSM modules at the same time. We feel sorry that you have to give up +SELinux/SMACK/AppArmor etc. when you want to use TOMOYO. + +We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM +version of TOMOYO, available at http://tomoyo.sourceforge.jp/1.7/ . +LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning +to port non-LSM version's functionalities to LSM versions. diff --git a/Documentation/tomoyo.txt b/Documentation/tomoyo.txt deleted file mode 100644 index 200a2d37cbc8..000000000000 --- a/Documentation/tomoyo.txt +++ /dev/null @@ -1,55 +0,0 @@ ---- What is TOMOYO? --- - -TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel. - -LiveCD-based tutorials are available at -http://tomoyo.sourceforge.jp/1.7/1st-step/ubuntu10.04-live/ -http://tomoyo.sourceforge.jp/1.7/1st-step/centos5-live/ . -Though these tutorials use non-LSM version of TOMOYO, they are useful for you -to know what TOMOYO is. - ---- How to enable TOMOYO? --- - -Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on -kernel's command line. - -Please see http://tomoyo.sourceforge.jp/2.3/ for details. - ---- Where is documentation? --- - -User <-> Kernel interface documentation is available at -http://tomoyo.sourceforge.jp/2.3/policy-reference.html . - -Materials we prepared for seminars and symposiums are available at -http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 . -Below lists are chosen from three aspects. - -What is TOMOYO? - TOMOYO Linux Overview - http://sourceforge.jp/projects/tomoyo/docs/lca2009-takeda.pdf - TOMOYO Linux: pragmatic and manageable security for Linux - http://sourceforge.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf - TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box - http://sourceforge.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf - -What can TOMOYO do? - Deep inside TOMOYO Linux - http://sourceforge.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf - The role of "pathname based access control" in security. - http://sourceforge.jp/projects/tomoyo/docs/lfj2008-bof.pdf - -History of TOMOYO? - Realities of Mainlining - http://sourceforge.jp/projects/tomoyo/docs/lfj2008.pdf - ---- What is future plan? --- - -We believe that inode based security and name based security are complementary -and both should be used together. But unfortunately, so far, we cannot enable -multiple LSM modules at the same time. We feel sorry that you have to give up -SELinux/SMACK/AppArmor etc. when you want to use TOMOYO. - -We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM -version of TOMOYO, available at http://tomoyo.sourceforge.jp/1.7/ . -LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning -to port non-LSM version's functionalities to LSM versions. diff --git a/MAINTAINERS b/MAINTAINERS index 69f19f10314a..3fa170ba5f98 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3705,7 +3705,7 @@ KEYS/KEYRINGS: M: David Howells L: keyrings@linux-nfs.org S: Maintained -F: Documentation/keys.txt +F: Documentation/security/keys.txt F: include/linux/key.h F: include/linux/key-type.h F: include/keys/ @@ -3717,7 +3717,7 @@ M: Mimi Zohar L: linux-security-module@vger.kernel.org L: keyrings@linux-nfs.org S: Supported -F: Documentation/keys-trusted-encrypted.txt +F: Documentation/security/keys-trusted-encrypted.txt F: include/keys/trusted-type.h F: security/keys/trusted.c F: security/keys/trusted.h @@ -3728,7 +3728,7 @@ M: David Safford L: linux-security-module@vger.kernel.org L: keyrings@linux-nfs.org S: Supported -F: Documentation/keys-trusted-encrypted.txt +F: Documentation/security/keys-trusted-encrypted.txt F: include/keys/encrypted-type.h F: security/keys/encrypted.c F: security/keys/encrypted.h diff --git a/include/linux/cred.h b/include/linux/cred.h index be16b61283cc..82607992f308 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -1,4 +1,4 @@ -/* Credentials management - see Documentation/credentials.txt +/* Credentials management - see Documentation/security/credentials.txt * * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/include/linux/key.h b/include/linux/key.h index b2bb01719561..303982a69933 100644 --- a/include/linux/key.h +++ b/include/linux/key.h @@ -9,7 +9,7 @@ * 2 of the License, or (at your option) any later version. * * - * See Documentation/keys.txt for information on keys/keyrings. + * See Documentation/security/keys.txt for information on keys/keyrings. */ #ifndef _LINUX_KEY_H diff --git a/kernel/cred.c b/kernel/cred.c index 8093c16b84b1..004e3679624d 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -1,4 +1,4 @@ -/* Task credentials management - see Documentation/credentials.txt +/* Task credentials management - see Documentation/security/credentials.txt * * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved. * Written by David Howells (dhowells@redhat.com) diff --git a/scripts/selinux/README b/scripts/selinux/README index a936315ba2c8..4d020ecb7524 100644 --- a/scripts/selinux/README +++ b/scripts/selinux/README @@ -1,2 +1,2 @@ -Please see Documentation/SELinux.txt for information on +Please see Documentation/security/SELinux.txt for information on installing a dummy SELinux policy. diff --git a/security/apparmor/match.c b/security/apparmor/match.c index 06d764ccbbe5..94de6b4907c8 100644 --- a/security/apparmor/match.c +++ b/security/apparmor/match.c @@ -194,7 +194,7 @@ void aa_dfa_free_kref(struct kref *kref) * @flags: flags controlling what type of accept tables are acceptable * * Unpack a dfa that has been serialized. To find information on the dfa - * format look in Documentation/apparmor.txt + * format look in Documentation/security/apparmor.txt * Assumes the dfa @blob stream has been aligned on a 8 byte boundary * * Returns: an unpacked dfa ready for matching or ERR_PTR on failure diff --git a/security/apparmor/policy_unpack.c b/security/apparmor/policy_unpack.c index e33aaf7e5744..d6d9a57b5652 100644 --- a/security/apparmor/policy_unpack.c +++ b/security/apparmor/policy_unpack.c @@ -12,8 +12,8 @@ * published by the Free Software Foundation, version 2 of the * License. * - * AppArmor uses a serialized binary format for loading policy. - * To find policy format documentation look in Documentation/apparmor.txt + * AppArmor uses a serialized binary format for loading policy. To find + * policy format documentation look in Documentation/security/apparmor.txt * All policy is validated before it is used. */ diff --git a/security/keys/encrypted.c b/security/keys/encrypted.c index 69907a58a683..b1cba5bf0a5e 100644 --- a/security/keys/encrypted.c +++ b/security/keys/encrypted.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation, version 2 of the License. * - * See Documentation/keys-trusted-encrypted.txt + * See Documentation/security/keys-trusted-encrypted.txt */ #include diff --git a/security/keys/request_key.c b/security/keys/request_key.c index df3c0417ee40..d41cc153a313 100644 --- a/security/keys/request_key.c +++ b/security/keys/request_key.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * See Documentation/keys-request-key.txt + * See Documentation/security/keys-request-key.txt */ #include diff --git a/security/keys/request_key_auth.c b/security/keys/request_key_auth.c index 68164031a74e..3c0cfdec6e37 100644 --- a/security/keys/request_key_auth.c +++ b/security/keys/request_key_auth.c @@ -8,7 +8,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * See Documentation/keys-request-key.txt + * See Documentation/security/keys-request-key.txt */ #include diff --git a/security/keys/trusted.c b/security/keys/trusted.c index c99b9368368c..0c33e2ea1f3c 100644 --- a/security/keys/trusted.c +++ b/security/keys/trusted.c @@ -8,7 +8,7 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation, version 2 of the License. * - * See Documentation/keys-trusted-encrypted.txt + * See Documentation/security/keys-trusted-encrypted.txt */ #include -- cgit v1.2.3 From d08e44570ed611c527a1062eb4f8c6ac61832e6e Mon Sep 17 00:00:00 2001 From: Shengzhou Liu Date: Thu, 19 May 2011 18:48:01 +0800 Subject: powerpc/fsl_lbc: Add workaround for ELBC-A001 erratum Simultaneous FCM and GPCM or UPM operation may erroneously trigger bus monitor timeout. Set the local bus monitor timeout value to the maximum by setting LBCR[BMT] = 0 and LBCR[BMTPS] = 0xF. Signed-off-by: Shengzhou Liu Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/fsl_lbc.h | 2 ++ arch/powerpc/sysdev/fsl_lbc.c | 9 +++++++-- 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 5c1bf3466749..8a0b5ece8f76 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -157,6 +157,8 @@ struct fsl_lbc_regs { #define LBCR_EPAR_SHIFT 16 #define LBCR_BMT 0x0000FF00 #define LBCR_BMT_SHIFT 8 +#define LBCR_BMTPS 0x0000000F +#define LBCR_BMTPS_SHIFT 0 #define LBCR_INIT 0x00040000 __be32 lcrr; /**< Clock Ratio Register */ #define LCRR_DBYP 0x80000000 diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 4fcb5a4e60dd..0608b1657da4 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -184,7 +184,8 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar) } EXPORT_SYMBOL(fsl_upm_run_pattern); -static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl) +static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl, + struct device_node *node) { struct fsl_lbc_regs __iomem *lbc = ctrl->regs; @@ -198,6 +199,10 @@ static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl) /* Enable interrupts for any detected events */ out_be32(&lbc->lteir, LTEIR_ENABLE); + /* Set the monitor timeout value to the maximum for erratum A001 */ + if (of_device_is_compatible(node, "fsl,elbc")) + clrsetbits_be32(&lbc->lbcr, LBCR_BMT, LBCR_BMTPS); + return 0; } @@ -304,7 +309,7 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev) fsl_lbc_ctrl_dev->dev = &dev->dev; - ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev); + ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev, dev->dev.of_node); if (ret < 0) goto err; -- cgit v1.2.3 From cce1f106c64dc1d19d5e9406320fde18dfc662df Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Thu, 18 Nov 2010 14:57:32 +0800 Subject: powerpc/fsl_rio: move machine_check handler Add support for machine_check support into machine_check_e500 and machine_check_e500mc. Signed-off-by: Shaohui Xie Cc: Li Yang Cc: Roy Zang Cc: Alexandre Bounine Signed-off-by: Kumar Gala --- arch/powerpc/include/asm/rio.h | 5 +++++ arch/powerpc/kernel/traps.c | 13 +++++++++++++ arch/powerpc/sysdev/fsl_rio.c | 15 +++------------ 3 files changed, 21 insertions(+), 12 deletions(-) diff --git a/arch/powerpc/include/asm/rio.h b/arch/powerpc/include/asm/rio.h index 0018bf80cb25..d902abd33995 100644 --- a/arch/powerpc/include/asm/rio.h +++ b/arch/powerpc/include/asm/rio.h @@ -14,5 +14,10 @@ #define ASM_PPC_RIO_H extern void platform_rio_init(void); +#ifdef CONFIG_RAPIDIO +extern int fsl_rio_mcheck_exception(struct pt_regs *); +#else +static inline int fsl_rio_mcheck_exception(struct pt_regs *regs) {return 0; } +#endif #endif /* ASM_PPC_RIO_H */ diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index b13306b0d925..0ff4ab98d50c 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -55,6 +55,7 @@ #endif #include #include +#include #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) int (*__debugger)(struct pt_regs *regs) __read_mostly; @@ -424,6 +425,12 @@ int machine_check_e500mc(struct pt_regs *regs) unsigned long reason = mcsr; int recoverable = 1; + if (reason & MCSR_BUS_RBERR) { + recoverable = fsl_rio_mcheck_exception(regs); + if (recoverable == 1) + goto silent_out; + } + printk("Machine check in kernel mode.\n"); printk("Caused by (from MCSR=%lx): ", reason); @@ -499,6 +506,7 @@ int machine_check_e500mc(struct pt_regs *regs) reason & MCSR_MEA ? "Effective" : "Physical", addr); } +silent_out: mtspr(SPRN_MCSR, mcsr); return mfspr(SPRN_MCSR) == 0 && recoverable; } @@ -507,6 +515,11 @@ int machine_check_e500(struct pt_regs *regs) { unsigned long reason = get_mc_reason(regs); + if (reason & MCSR_BUS_RBERR) { + if (fsl_rio_mcheck_exception(regs)) + return 1; + } + printk("Machine check in kernel mode.\n"); printk("Caused by (from MCSR=%lx): ", reason); diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 49798532b477..34440e1bac18 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -260,9 +260,7 @@ struct rio_priv { static void __iomem *rio_regs_win; #ifdef CONFIG_E500 -static int (*saved_mcheck_exception)(struct pt_regs *regs); - -static int fsl_rio_mcheck_exception(struct pt_regs *regs) +int fsl_rio_mcheck_exception(struct pt_regs *regs) { const struct exception_table_entry *entry = NULL; unsigned long reason = mfspr(SPRN_MCSR); @@ -284,11 +282,9 @@ static int fsl_rio_mcheck_exception(struct pt_regs *regs) } } - if (saved_mcheck_exception) - return saved_mcheck_exception(regs); - else - return cur_cpu_spec->machine_check(regs); + return 0; } +EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception); #endif /** @@ -1538,11 +1534,6 @@ int fsl_rio_setup(struct platform_device *dev) fsl_rio_doorbell_init(port); fsl_rio_port_write_init(port); -#ifdef CONFIG_E500 - saved_mcheck_exception = ppc_md.machine_check_exception; - ppc_md.machine_check_exception = fsl_rio_mcheck_exception; -#endif - return 0; err: iounmap(priv->regs_win); -- cgit v1.2.3 From 6ff31453161e8614e8ba3b360f8d883a27230e0c Mon Sep 17 00:00:00 2001 From: Shaohui Xie Date: Thu, 18 Nov 2010 14:57:53 +0800 Subject: powerpc/fsl_rio: Error interrupt handler for sRIO on MPC85xx The sRIO controller reports errors to the core with one signal, it uses register EPWISR to provides the core quick access to where the error occurred. The EPWISR indicates that there are 4 interrupts sources, port1, port2, message unit and port write receive, but the sRIO driver does not support port2 for now, still the handler takes care of port2. Currently the handler only clear error status without any recovery. Signed-off-by: Shaohui Xie Cc: Li Yang Cc: Kumar Gala Cc: Roy Zang Cc: Alexandre Bounine Signed-off-by: Kumar Gala --- arch/powerpc/sysdev/fsl_rio.c | 85 +++++++++++++++++++++++++++++++++++++++---- 1 file changed, 77 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 34440e1bac18..5b206a2fe17c 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -10,7 +10,7 @@ * - Added Port-Write message handling * - Added Machine Check exception handling * - * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. + * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc. * Zhang Wei * * Copyright 2005 MontaVista Software, Inc. @@ -47,15 +47,33 @@ #define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq) #define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq) +#define IPWSR_CLEAR 0x98 +#define OMSR_CLEAR 0x1cb3 +#define IMSR_CLEAR 0x491 +#define IDSR_CLEAR 0x91 +#define ODSR_CLEAR 0x1c00 +#define LTLEECSR_ENABLE_ALL 0xFFC000FC +#define ESCSR_CLEAR 0x07120204 + +#define RIO_PORT1_EDCSR 0x0640 +#define RIO_PORT2_EDCSR 0x0680 +#define RIO_PORT1_IECSR 0x10130 +#define RIO_PORT2_IECSR 0x101B0 +#define RIO_IM0SR 0x13064 +#define RIO_IM1SR 0x13164 +#define RIO_OM0SR 0x13004 +#define RIO_OM1SR 0x13104 + #define RIO_ATMU_REGS_OFFSET 0x10c00 #define RIO_P_MSG_REGS_OFFSET 0x11000 #define RIO_S_MSG_REGS_OFFSET 0x13000 #define RIO_GCCSR 0x13c #define RIO_ESCSR 0x158 +#define RIO_PORT2_ESCSR 0x178 #define RIO_CCSR 0x15c #define RIO_LTLEDCSR 0x0608 -#define RIO_LTLEDCSR_IER 0x80000000 -#define RIO_LTLEDCSR_PRT 0x01000000 +#define RIO_LTLEDCSR_IER 0x80000000 +#define RIO_LTLEDCSR_PRT 0x01000000 #define RIO_LTLEECSR 0x060c #define RIO_EPWISR 0x10010 #define RIO_ISR_AACR 0x10120 @@ -88,7 +106,10 @@ #define RIO_IPWSR_PWD 0x00000008 #define RIO_IPWSR_PWB 0x00000004 -#define RIO_EPWISR_PINT 0x80000000 +/* EPWISR Error match value */ +#define RIO_EPWISR_PINT1 0x80000000 +#define RIO_EPWISR_PINT2 0x40000000 +#define RIO_EPWISR_MU 0x00000002 #define RIO_EPWISR_PW 0x00000001 #define RIO_MSG_DESC_SIZE 32 @@ -1060,6 +1081,40 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) return rc; } +static void port_error_handler(struct rio_mport *port, int offset) +{ + /*XXX: Error recovery is not implemented, we just clear errors */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); + + if (offset == 0) { + out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR); + } else { + out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR); + } +} + +static void msg_unit_error_handler(struct rio_mport *port) +{ + struct rio_priv *priv = port->priv; + + /*XXX: Error recovery is not implemented, we just clear errors */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); + + out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR); + out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR); + out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR); + out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR); + + out_be32(&priv->msg_regs->odsr, ODSR_CLEAR); + out_be32(&priv->msg_regs->dsr, IDSR_CLEAR); + + out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR); +} + /** * fsl_rio_port_write_handler - MPC85xx port write interrupt handler * @irq: Linux interrupt number @@ -1140,10 +1195,22 @@ fsl_rio_port_write_handler(int irq, void *dev_instance) } pw_done: - if (epwisr & RIO_EPWISR_PINT) { + if (epwisr & RIO_EPWISR_PINT1) { + tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); + pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); + port_error_handler(port, 0); + } + + if (epwisr & RIO_EPWISR_PINT2) { + tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); + pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); + port_error_handler(port, 1); + } + + if (epwisr & RIO_EPWISR_MU) { tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); - out_be32(priv->regs_win + RIO_LTLEDCSR, 0); + msg_unit_error_handler(port); } return IRQ_HANDLED; @@ -1254,12 +1321,14 @@ static int fsl_rio_port_write_init(struct rio_mport *mport) /* Hook up port-write handler */ - rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, 0, - "port-write", (void *)mport); + rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, + IRQF_SHARED, "port-write", (void *)mport); if (rc < 0) { pr_err("MPC85xx RIO: unable to request inbound doorbell irq"); goto err_out; } + /* Enable Error Interrupt */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL); INIT_WORK(&priv->pw_work, fsl_pw_dpc); spin_lock_init(&priv->pw_fifo_lock); -- cgit v1.2.3 From 3d2606f42984613d324ad3047cf503bcddc3880a Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Fri, 20 May 2011 09:46:54 +0200 Subject: oprofile, x86: Enable preemption during pci device setup in IBS init IBS initialization is a mix of per-core register access and per-node pci device setup. Register access should be pinned to the cpu, but pci setup must run with preemption enabled. This patch better separates the code into non-/preemptible sections and fixes sleeping with preemption disabled. See bug message below. Fixes also freeing the eilvt entry by introducing put_eilvt(). BUG: sleeping function called from invalid context at mm/slub.c:824 in_atomic(): 1, irqs_disabled(): 0, pid: 32357, name: modprobe INFO: lockdep is turned off. Pid: 32357, comm: modprobe Not tainted 2.6.39-rc7+ #14 Call Trace: [] __might_sleep+0x112/0x117 [] kmem_cache_alloc_trace+0x4b/0xe7 [] kzalloc.constprop.0+0x29/0x2b [] pci_get_subsys+0x36/0x78 [] ? setup_APIC_eilvt+0xfb/0x139 [] pci_get_device+0x16/0x18 [] op_amd_init+0xd3/0x211 [oprofile] [] ? 0xffffffffa064cfff [] op_nmi_init+0x21e/0x26a [oprofile] [] oprofile_arch_init+0xe/0x26 [oprofile] [] oprofile_init+0x10/0x42 [oprofile] [] do_one_initcall+0x7f/0x13a [] sys_init_module+0x132/0x281 [] system_call_fastpath+0x16/0x1b Reported-by: Dave Jones Cc: [2.6.37.x] Signed-off-by: Robert Richter --- arch/x86/oprofile/op_model_amd.c | 95 +++++++++++++++++++++++----------------- 1 file changed, 54 insertions(+), 41 deletions(-) diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c index c3b8e24f2b16..9fd8a567fe1e 100644 --- a/arch/x86/oprofile/op_model_amd.c +++ b/arch/x86/oprofile/op_model_amd.c @@ -316,16 +316,23 @@ static void op_amd_stop_ibs(void) wrmsrl(MSR_AMD64_IBSOPCTL, 0); } -static inline int eilvt_is_available(int offset) +static inline int get_eilvt(int offset) { - /* check if we may assign a vector */ return !setup_APIC_eilvt(offset, 0, APIC_EILVT_MSG_NMI, 1); } +static inline int put_eilvt(int offset) +{ + return !setup_APIC_eilvt(offset, 0, 0, 1); +} + static inline int ibs_eilvt_valid(void) { int offset; u64 val; + int valid = 0; + + preempt_disable(); rdmsrl(MSR_AMD64_IBSCTL, val); offset = val & IBSCTL_LVT_OFFSET_MASK; @@ -333,16 +340,20 @@ static inline int ibs_eilvt_valid(void) if (!(val & IBSCTL_LVT_OFFSET_VALID)) { pr_err(FW_BUG "cpu %d, invalid IBS interrupt offset %d (MSR%08X=0x%016llx)\n", smp_processor_id(), offset, MSR_AMD64_IBSCTL, val); - return 0; + goto out; } - if (!eilvt_is_available(offset)) { + if (!get_eilvt(offset)) { pr_err(FW_BUG "cpu %d, IBS interrupt offset %d not available (MSR%08X=0x%016llx)\n", smp_processor_id(), offset, MSR_AMD64_IBSCTL, val); - return 0; + goto out; } - return 1; + valid = 1; +out: + preempt_enable(); + + return valid; } static inline int get_ibs_offset(void) @@ -600,67 +611,69 @@ static int setup_ibs_ctl(int ibs_eilvt_off) static int force_ibs_eilvt_setup(void) { - int i; + int offset; int ret; - /* find the next free available EILVT entry */ - for (i = 1; i < 4; i++) { - if (!eilvt_is_available(i)) - continue; - ret = setup_ibs_ctl(i); - if (ret) - return ret; - pr_err(FW_BUG "using offset %d for IBS interrupts\n", i); - return 0; + /* + * find the next free available EILVT entry, skip offset 0, + * pin search to this cpu + */ + preempt_disable(); + for (offset = 1; offset < APIC_EILVT_NR_MAX; offset++) { + if (get_eilvt(offset)) + break; } + preempt_enable(); - printk(KERN_DEBUG "No EILVT entry available\n"); - - return -EBUSY; -} - -static int __init_ibs_nmi(void) -{ - int ret; - - if (ibs_eilvt_valid()) - return 0; + if (offset == APIC_EILVT_NR_MAX) { + printk(KERN_DEBUG "No EILVT entry available\n"); + return -EBUSY; + } - ret = force_ibs_eilvt_setup(); + ret = setup_ibs_ctl(offset); if (ret) - return ret; + goto out; - if (!ibs_eilvt_valid()) - return -EFAULT; + if (!ibs_eilvt_valid()) { + ret = -EFAULT; + goto out; + } + pr_err(FW_BUG "using offset %d for IBS interrupts\n", offset); pr_err(FW_BUG "workaround enabled for IBS LVT offset\n"); return 0; +out: + preempt_disable(); + put_eilvt(offset); + preempt_enable(); + return ret; } /* * check and reserve APIC extended interrupt LVT offset for IBS if * available - * - * init_ibs() preforms implicitly cpu-local operations, so pin this - * thread to its current CPU */ static void init_ibs(void) { - preempt_disable(); - ibs_caps = get_ibs_caps(); + if (!ibs_caps) + return; + + if (ibs_eilvt_valid()) goto out; - if (__init_ibs_nmi() < 0) - ibs_caps = 0; - else - printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps); + if (!force_ibs_eilvt_setup()) + goto out; + + /* Failed to setup ibs */ + ibs_caps = 0; + return; out: - preempt_enable(); + printk(KERN_INFO "oprofile: AMD IBS detected (0x%08x)\n", ibs_caps); } static int (*create_arch_files)(struct super_block *sb, struct dentry *root); -- cgit v1.2.3 From 73c244a8a5541e3a1a1997be671b019a220a66e8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Sat, 30 Apr 2011 23:59:35 +0200 Subject: bq27x00_battery: Name of cycle count property MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fix using correct property POWER_SUPPLY_PROP_CYCLE_COUNT for cycle count instead POWER_SUPPLY_PROP_CHARGE_COUNTER Signed-off-by: Pali Rohár Tested-by: Pali Rohár Signed-off-by: Anton Vorontsov --- drivers/power/bq27x00_battery.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c index 59e68dbd028b..bb16f5b7e167 100644 --- a/drivers/power/bq27x00_battery.c +++ b/drivers/power/bq27x00_battery.c @@ -4,6 +4,7 @@ * Copyright (C) 2008 Rodolfo Giometti * Copyright (C) 2008 Eurotech S.p.A. * Copyright (C) 2010-2011 Lars-Peter Clausen + * Copyright (C) 2011 Pali Rohár * * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc. * @@ -76,7 +77,7 @@ struct bq27x00_reg_cache { int time_to_empty_avg; int time_to_full; int charge_full; - int charge_counter; + int cycle_count; int capacity; int flags; @@ -115,7 +116,7 @@ static enum power_supply_property bq27x00_battery_props[] = { POWER_SUPPLY_PROP_CHARGE_FULL, POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, - POWER_SUPPLY_PROP_CHARGE_COUNTER, + POWER_SUPPLY_PROP_CYCLE_COUNT, POWER_SUPPLY_PROP_ENERGY_NOW, }; @@ -267,7 +268,7 @@ static void bq27x00_update(struct bq27x00_device_info *di) cache.time_to_empty_avg = bq27x00_battery_read_time(di, BQ27x00_REG_TTECP); cache.time_to_full = bq27x00_battery_read_time(di, BQ27x00_REG_TTF); cache.charge_full = bq27x00_battery_read_lmd(di); - cache.charge_counter = bq27x00_battery_read_cyct(di); + cache.cycle_count = bq27x00_battery_read_cyct(di); if (!is_bq27500) cache.current_now = bq27x00_read(di, BQ27x00_REG_AI, false); @@ -496,8 +497,8 @@ static int bq27x00_battery_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: ret = bq27x00_simple_value(di->charge_design_full, val); break; - case POWER_SUPPLY_PROP_CHARGE_COUNTER: - ret = bq27x00_simple_value(di->cache.charge_counter, val); + case POWER_SUPPLY_PROP_CYCLE_COUNT: + ret = bq27x00_simple_value(di->cache.cycle_count, val); break; case POWER_SUPPLY_PROP_ENERGY_NOW: ret = bq27x00_battery_energy(di, val); -- cgit v1.2.3 From f17ef9b2dade4d7afb605465ef1a926fdfc1a4cc Mon Sep 17 00:00:00 2001 From: John Stultz Date: Mon, 25 Apr 2011 20:25:24 -0700 Subject: power: Make test_power driver more dynamic. In 2008 Masashi YOKOTA created the virtual battery driver found here: http://downloads.pylone.jp/src/virtual_battery/virtual_battery-0.0.1.tar.bz2 It found use out of tree, but was never merged upstream. Since then the test_power driver has been merged, which provides very similar functionality. This patch extends the test_power driver to be more dynamic at runtime, by merging portions of the Virtual Battery Driver by Masashi YOKOTA. With this patch, I can tweak the values in: /sys/module/test_power/parameters/* and watch the behavior of the gnome power managment daemon or other battery UI software. CC: Anton Vorontsov CC: Akihiro MAEDA CC: Masashi YOKOTA Signed-off-by: John Stultz Signed-off-by: Anton Vorontsov --- drivers/power/test_power.c | 276 +++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 266 insertions(+), 10 deletions(-) diff --git a/drivers/power/test_power.c b/drivers/power/test_power.c index 0cd9f67d33e5..b527c93bf2f3 100644 --- a/drivers/power/test_power.c +++ b/drivers/power/test_power.c @@ -3,6 +3,12 @@ * * Copyright 2010 Anton Vorontsov * + * Dynamic module parameter code from the Virtual Battery Driver + * Copyright (C) 2008 Pylone, Inc. + * By: Masashi YOKOTA + * Originally found here: + * http://downloads.pylone.jp/src/virtual_battery/virtual_battery-0.0.1.tar.bz2 + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -15,8 +21,12 @@ #include #include -static int test_power_ac_online = 1; -static int test_power_battery_status = POWER_SUPPLY_STATUS_CHARGING; +static int ac_online = 1; +static int battery_status = POWER_SUPPLY_STATUS_DISCHARGING; +static int battery_health = POWER_SUPPLY_HEALTH_GOOD; +static int battery_present = 1; /* true */ +static int battery_technology = POWER_SUPPLY_TECHNOLOGY_LION; +static int battery_capacity = 50; static int test_power_get_ac_property(struct power_supply *psy, enum power_supply_property psp, @@ -24,7 +34,7 @@ static int test_power_get_ac_property(struct power_supply *psy, { switch (psp) { case POWER_SUPPLY_PROP_ONLINE: - val->intval = test_power_ac_online; + val->intval = ac_online; break; default: return -EINVAL; @@ -47,22 +57,30 @@ static int test_power_get_battery_property(struct power_supply *psy, val->strval = UTS_RELEASE; break; case POWER_SUPPLY_PROP_STATUS: - val->intval = test_power_battery_status; + val->intval = battery_status; break; case POWER_SUPPLY_PROP_CHARGE_TYPE: val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; break; case POWER_SUPPLY_PROP_HEALTH: - val->intval = POWER_SUPPLY_HEALTH_GOOD; + val->intval = battery_health; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = battery_present; break; case POWER_SUPPLY_PROP_TECHNOLOGY: - val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + val->intval = battery_technology; break; case POWER_SUPPLY_PROP_CAPACITY_LEVEL: val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; break; case POWER_SUPPLY_PROP_CAPACITY: - val->intval = 50; + case POWER_SUPPLY_PROP_CHARGE_NOW: + val->intval = battery_capacity; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + case POWER_SUPPLY_PROP_CHARGE_FULL: + val->intval = 100; break; case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW: @@ -84,9 +102,11 @@ static enum power_supply_property test_power_battery_props[] = { POWER_SUPPLY_PROP_STATUS, POWER_SUPPLY_PROP_CHARGE_TYPE, POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, POWER_SUPPLY_PROP_CHARGE_FULL, - POWER_SUPPLY_PROP_CHARGE_EMPTY, + POWER_SUPPLY_PROP_CHARGE_NOW, POWER_SUPPLY_PROP_CAPACITY, POWER_SUPPLY_PROP_CAPACITY_LEVEL, POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, @@ -118,6 +138,7 @@ static struct power_supply test_power_supplies[] = { }, }; + static int __init test_power_init(void) { int i; @@ -145,8 +166,8 @@ static void __exit test_power_exit(void) int i; /* Let's see how we handle changes... */ - test_power_ac_online = 0; - test_power_battery_status = POWER_SUPPLY_STATUS_DISCHARGING; + ac_online = 0; + battery_status = POWER_SUPPLY_STATUS_DISCHARGING; for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++) power_supply_changed(&test_power_supplies[i]); pr_info("%s: 'changed' event sent, sleeping for 10 seconds...\n", @@ -158,6 +179,241 @@ static void __exit test_power_exit(void) } module_exit(test_power_exit); + + +#define MAX_KEYLENGTH 256 +struct battery_property_map { + int value; + char const *key; +}; + +static struct battery_property_map map_ac_online[] = { + { 0, "on" }, + { 1, "off" }, + { -1, NULL }, +}; + +static struct battery_property_map map_status[] = { + { POWER_SUPPLY_STATUS_CHARGING, "charging" }, + { POWER_SUPPLY_STATUS_DISCHARGING, "discharging" }, + { POWER_SUPPLY_STATUS_NOT_CHARGING, "not-charging" }, + { POWER_SUPPLY_STATUS_FULL, "full" }, + { -1, NULL }, +}; + +static struct battery_property_map map_health[] = { + { POWER_SUPPLY_HEALTH_GOOD, "good" }, + { POWER_SUPPLY_HEALTH_OVERHEAT, "overheat" }, + { POWER_SUPPLY_HEALTH_DEAD, "dead" }, + { POWER_SUPPLY_HEALTH_OVERVOLTAGE, "overvoltage" }, + { POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, "failure" }, + { -1, NULL }, +}; + +static struct battery_property_map map_present[] = { + { 0, "false" }, + { 1, "true" }, + { -1, NULL }, +}; + +static struct battery_property_map map_technology[] = { + { POWER_SUPPLY_TECHNOLOGY_NiMH, "NiMH" }, + { POWER_SUPPLY_TECHNOLOGY_LION, "LION" }, + { POWER_SUPPLY_TECHNOLOGY_LIPO, "LIPO" }, + { POWER_SUPPLY_TECHNOLOGY_LiFe, "LiFe" }, + { POWER_SUPPLY_TECHNOLOGY_NiCd, "NiCd" }, + { POWER_SUPPLY_TECHNOLOGY_LiMn, "LiMn" }, + { -1, NULL }, +}; + + +static int map_get_value(struct battery_property_map *map, const char *key, + int def_val) +{ + char buf[MAX_KEYLENGTH]; + int cr; + + strncpy(buf, key, MAX_KEYLENGTH); + buf[MAX_KEYLENGTH-1] = '\0'; + + cr = strnlen(buf, MAX_KEYLENGTH) - 1; + if (buf[cr] == '\n') + buf[cr] = '\0'; + + while (map->key) { + if (strncasecmp(map->key, buf, MAX_KEYLENGTH) == 0) + return map->value; + map++; + } + + return def_val; +} + + +static const char *map_get_key(struct battery_property_map *map, int value, + const char *def_key) +{ + while (map->key) { + if (map->value == value) + return map->key; + map++; + } + + return def_key; +} + +static int param_set_ac_online(const char *key, const struct kernel_param *kp) +{ + ac_online = map_get_value(map_ac_online, key, ac_online); + power_supply_changed(&test_power_supplies[0]); + return 0; +} + +static int param_get_ac_online(char *buffer, const struct kernel_param *kp) +{ + strcpy(buffer, map_get_key(map_ac_online, ac_online, "unknown")); + return strlen(buffer); +} + +static int param_set_battery_status(const char *key, + const struct kernel_param *kp) +{ + battery_status = map_get_value(map_status, key, battery_status); + power_supply_changed(&test_power_supplies[1]); + return 0; +} + +static int param_get_battery_status(char *buffer, const struct kernel_param *kp) +{ + strcpy(buffer, map_get_key(map_status, battery_status, "unknown")); + return strlen(buffer); +} + +static int param_set_battery_health(const char *key, + const struct kernel_param *kp) +{ + battery_health = map_get_value(map_health, key, battery_health); + power_supply_changed(&test_power_supplies[1]); + return 0; +} + +static int param_get_battery_health(char *buffer, const struct kernel_param *kp) +{ + strcpy(buffer, map_get_key(map_health, battery_health, "unknown")); + return strlen(buffer); +} + +static int param_set_battery_present(const char *key, + const struct kernel_param *kp) +{ + battery_present = map_get_value(map_present, key, battery_present); + power_supply_changed(&test_power_supplies[0]); + return 0; +} + +static int param_get_battery_present(char *buffer, + const struct kernel_param *kp) +{ + strcpy(buffer, map_get_key(map_present, battery_present, "unknown")); + return strlen(buffer); +} + +static int param_set_battery_technology(const char *key, + const struct kernel_param *kp) +{ + battery_technology = map_get_value(map_technology, key, + battery_technology); + power_supply_changed(&test_power_supplies[1]); + return 0; +} + +static int param_get_battery_technology(char *buffer, + const struct kernel_param *kp) +{ + strcpy(buffer, + map_get_key(map_technology, battery_technology, "unknown")); + return strlen(buffer); +} + +static int param_set_battery_capacity(const char *key, + const struct kernel_param *kp) +{ + int tmp; + + if (1 != sscanf(key, "%d", &tmp)) + return -EINVAL; + + battery_capacity = tmp; + power_supply_changed(&test_power_supplies[1]); + return 0; +} + +#define param_get_battery_capacity param_get_int + + + +static struct kernel_param_ops param_ops_ac_online = { + .set = param_set_ac_online, + .get = param_get_ac_online, +}; + +static struct kernel_param_ops param_ops_battery_status = { + .set = param_set_battery_status, + .get = param_get_battery_status, +}; + +static struct kernel_param_ops param_ops_battery_present = { + .set = param_set_battery_present, + .get = param_get_battery_present, +}; + +static struct kernel_param_ops param_ops_battery_technology = { + .set = param_set_battery_technology, + .get = param_get_battery_technology, +}; + +static struct kernel_param_ops param_ops_battery_health = { + .set = param_set_battery_health, + .get = param_get_battery_health, +}; + +static struct kernel_param_ops param_ops_battery_capacity = { + .set = param_set_battery_capacity, + .get = param_get_battery_capacity, +}; + + +#define param_check_ac_online(name, p) __param_check(name, p, void); +#define param_check_battery_status(name, p) __param_check(name, p, void); +#define param_check_battery_present(name, p) __param_check(name, p, void); +#define param_check_battery_technology(name, p) __param_check(name, p, void); +#define param_check_battery_health(name, p) __param_check(name, p, void); +#define param_check_battery_capacity(name, p) __param_check(name, p, void); + + +module_param(ac_online, ac_online, 0644); +MODULE_PARM_DESC(ac_online, "AC charging state "); + +module_param(battery_status, battery_status, 0644); +MODULE_PARM_DESC(battery_status, + "battery status "); + +module_param(battery_present, battery_present, 0644); +MODULE_PARM_DESC(battery_present, + "battery presence state "); + +module_param(battery_technology, battery_technology, 0644); +MODULE_PARM_DESC(battery_technology, + "battery technology "); + +module_param(battery_health, battery_health, 0644); +MODULE_PARM_DESC(battery_health, + "battery health state "); + +module_param(battery_capacity, battery_capacity, 0644); +MODULE_PARM_DESC(battery_capacity, "battery capacity (percentage)"); + + MODULE_DESCRIPTION("Power supply driver for testing"); MODULE_AUTHOR("Anton Vorontsov "); MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 3af98a8f39dee8ffb93a93e4145276d58e66e48f Mon Sep 17 00:00:00 2001 From: Paul Parsons Date: Mon, 25 Apr 2011 14:43:30 +0000 Subject: ds2760_battery: Fix indexing of the 4 active full EEPROM registers Fix indexing of the 4 active full EEPROM registers. The indexing was out by 1, accessing the EEPROM registers at 0x23 to 0x26 instead of 0x22 to 0x25. Signed-off-by: Paul Parsons Signed-off-by: Anton Vorontsov --- drivers/power/ds2760_battery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index e534290f3256..aa60e3791754 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -186,7 +186,7 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di) scale[0] = di->full_active_uAh; for (i = 1; i < 5; i++) - scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 2 + i]; + scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 1 + i]; di->full_active_uAh = battery_interpolate(scale, di->temp_C / 10); di->full_active_uAh *= 1000; /* convert to µAh */ -- cgit v1.2.3 From 9c6f8740d0c8d2b4de78511257f38384f4cbb292 Mon Sep 17 00:00:00 2001 From: Paul Parsons Date: Mon, 25 Apr 2011 13:45:40 +0000 Subject: ds2760_battery: Fix rated capacity of the hx4700 1800mAh battery Fix rated capacity of the HP iPAQ hx4700 3.7V 1800mAh (359113-001) battery. For this battery the value of the rated capacity EEPROM register at 0x32 is 7; thus rated_capacities[7] = 1800. Signed-off-by: Paul Parsons Signed-off-by: Anton Vorontsov --- drivers/power/ds2760_battery.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/power/ds2760_battery.c b/drivers/power/ds2760_battery.c index aa60e3791754..f2c9cc33c0f9 100644 --- a/drivers/power/ds2760_battery.c +++ b/drivers/power/ds2760_battery.c @@ -86,7 +86,11 @@ static int rated_capacities[] = { 920, /* NEC */ 1440, /* Samsung */ 1440, /* BYD */ +#ifdef CONFIG_MACH_H4700 + 1800, /* HP iPAQ hx4700 3.7V 1800mAh (359113-001) */ +#else 1440, /* Lishen */ +#endif 1440, /* NEC */ 2880, /* Samsung */ 2880, /* BYD */ -- cgit v1.2.3 From 906649de0eacde7a643b5a0750de6207441ad54f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 11 Apr 2011 01:40:13 +0200 Subject: PXA: Use dev_pm_ops in z2_battery Signed-off-by: Marek Vasut Signed-off-by: Anton Vorontsov --- drivers/power/z2_battery.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c index e5ced3a4c1ed..d119c38b3ff6 100644 --- a/drivers/power/z2_battery.c +++ b/drivers/power/z2_battery.c @@ -271,24 +271,33 @@ static int __devexit z2_batt_remove(struct i2c_client *client) } #ifdef CONFIG_PM -static int z2_batt_suspend(struct i2c_client *client, pm_message_t state) +static int z2_batt_suspend(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); struct z2_charger *charger = i2c_get_clientdata(client); flush_work_sync(&charger->bat_work); return 0; } -static int z2_batt_resume(struct i2c_client *client) +static int z2_batt_resume(struct device *dev) { + struct i2c_client *client = to_i2c_client(dev); struct z2_charger *charger = i2c_get_clientdata(client); schedule_work(&charger->bat_work); return 0; } + +static const struct dev_pm_ops z2_battery_pm_ops = { + .suspend = z2_batt_suspend, + .resume = z2_batt_resume, +}; + +#define Z2_BATTERY_PM_OPS (&z2_battery_pm_ops) + #else -#define z2_batt_suspend NULL -#define z2_batt_resume NULL +#define Z2_BATTERY_PM_OPS (NULL) #endif static const struct i2c_device_id z2_batt_id[] = { @@ -301,11 +310,10 @@ static struct i2c_driver z2_batt_driver = { .driver = { .name = "z2-battery", .owner = THIS_MODULE, + .pm = Z2_BATTERY_PM_OPS }, .probe = z2_batt_probe, .remove = z2_batt_remove, - .suspend = z2_batt_suspend, - .resume = z2_batt_resume, .id_table = z2_batt_id, }; -- cgit v1.2.3 From 16cdcec736cd214350cdb591bf1091f8beedefa0 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Fri, 22 Apr 2011 18:12:22 +0800 Subject: btrfs: implement delayed inode items operation Changelog V5 -> V6: - Fix oom when the memory load is high, by storing the delayed nodes into the root's radix tree, and letting btrfs inodes go. Changelog V4 -> V5: - Fix the race on adding the delayed node to the inode, which is spotted by Chris Mason. - Merge Chris Mason's incremental patch into this patch. - Fix deadlock between readdir() and memory fault, which is reported by Itaru Kitayama. Changelog V3 -> V4: - Fix nested lock, which is reported by Itaru Kitayama, by updating space cache inode in time. Changelog V2 -> V3: - Fix the race between the delayed worker and the task which does delayed items balance, which is reported by Tsutomu Itoh. - Modify the patch address David Sterba's comment. - Fix the bug of the cpu recursion spinlock, reported by Chris Mason Changelog V1 -> V2: - break up the global rb-tree, use a list to manage the delayed nodes, which is created for every directory and file, and used to manage the delayed directory name index items and the delayed inode item. - introduce a worker to deal with the delayed nodes. Compare with Ext3/4, the performance of file creation and deletion on btrfs is very poor. the reason is that btrfs must do a lot of b+ tree insertions, such as inode item, directory name item, directory name index and so on. If we can do some delayed b+ tree insertion or deletion, we can improve the performance, so we made this patch which implemented delayed directory name index insertion/deletion and delayed inode update. Implementation: - introduce a delayed root object into the filesystem, that use two lists to manage the delayed nodes which are created for every file/directory. One is used to manage all the delayed nodes that have delayed items. And the other is used to manage the delayed nodes which is waiting to be dealt with by the work thread. - Every delayed node has two rb-tree, one is used to manage the directory name index which is going to be inserted into b+ tree, and the other is used to manage the directory name index which is going to be deleted from b+ tree. - introduce a worker to deal with the delayed operation. This worker is used to deal with the works of the delayed directory name index items insertion and deletion and the delayed inode update. When the delayed items is beyond the lower limit, we create works for some delayed nodes and insert them into the work queue of the worker, and then go back. When the delayed items is beyond the upper bound, we create works for all the delayed nodes that haven't been dealt with, and insert them into the work queue of the worker, and then wait for that the untreated items is below some threshold value. - When we want to insert a directory name index into b+ tree, we just add the information into the delayed inserting rb-tree. And then we check the number of the delayed items and do delayed items balance. (The balance policy is above.) - When we want to delete a directory name index from the b+ tree, we search it in the inserting rb-tree at first. If we look it up, just drop it. If not, add the key of it into the delayed deleting rb-tree. Similar to the delayed inserting rb-tree, we also check the number of the delayed items and do delayed items balance. (The same to inserting manipulation) - When we want to update the metadata of some inode, we cached the data of the inode into the delayed node. the worker will flush it into the b+ tree after dealing with the delayed insertion and deletion. - We will move the delayed node to the tail of the list after we access the delayed node, By this way, we can cache more delayed items and merge more inode updates. - If we want to commit transaction, we will deal with all the delayed node. - the delayed node will be freed when we free the btrfs inode. - Before we log the inode items, we commit all the directory name index items and the delayed inode update. I did a quick test by the benchmark tool[1] and found we can improve the performance of file creation by ~15%, and file deletion by ~20%. Before applying this patch: Create files: Total files: 50000 Total time: 1.096108 Average time: 0.000022 Delete files: Total files: 50000 Total time: 1.510403 Average time: 0.000030 After applying this patch: Create files: Total files: 50000 Total time: 0.932899 Average time: 0.000019 Delete files: Total files: 50000 Total time: 1.215732 Average time: 0.000024 [1] http://marc.info/?l=linux-btrfs&m=128212635122920&q=p3 Many thanks for Kitayama-san's help! Signed-off-by: Miao Xie Reviewed-by: David Sterba Tested-by: Tsutomu Itoh Tested-by: Itaru Kitayama Signed-off-by: Chris Mason --- fs/btrfs/Makefile | 2 +- fs/btrfs/btrfs_inode.h | 5 + fs/btrfs/ctree.c | 14 +- fs/btrfs/ctree.h | 29 +- fs/btrfs/delayed-inode.c | 1694 ++++++++++++++++++++++++++++++++++++++++++++++ fs/btrfs/delayed-inode.h | 141 ++++ fs/btrfs/dir-item.c | 34 +- fs/btrfs/disk-io.c | 50 +- fs/btrfs/disk-io.h | 1 + fs/btrfs/extent-tree.c | 18 +- fs/btrfs/inode.c | 111 ++- fs/btrfs/ioctl.c | 2 +- fs/btrfs/super.c | 10 +- fs/btrfs/transaction.c | 45 +- fs/btrfs/transaction.h | 2 + fs/btrfs/tree-log.c | 7 + 16 files changed, 2074 insertions(+), 91 deletions(-) create mode 100644 fs/btrfs/delayed-inode.c create mode 100644 fs/btrfs/delayed-inode.h diff --git a/fs/btrfs/Makefile b/fs/btrfs/Makefile index 31610ea73aec..a8411c22313d 100644 --- a/fs/btrfs/Makefile +++ b/fs/btrfs/Makefile @@ -7,4 +7,4 @@ btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \ extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \ extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \ export.o tree-log.o acl.o free-space-cache.o zlib.o lzo.o \ - compression.o delayed-ref.o relocation.o + compression.o delayed-ref.o relocation.o delayed-inode.o diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index 57c3bb2884ce..beefafd91f22 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -22,6 +22,7 @@ #include "extent_map.h" #include "extent_io.h" #include "ordered-data.h" +#include "delayed-inode.h" /* in memory btrfs inode */ struct btrfs_inode { @@ -158,9 +159,13 @@ struct btrfs_inode { */ unsigned force_compress:4; + struct btrfs_delayed_node *delayed_node; + struct inode vfs_inode; }; +extern unsigned char btrfs_filetype_table[]; + static inline struct btrfs_inode *BTRFS_I(struct inode *inode) { return container_of(inode, struct btrfs_inode, vfs_inode); diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 84d7ca1fe0ba..2736b6b2ff5f 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -38,11 +38,6 @@ static int balance_node_right(struct btrfs_trans_handle *trans, struct extent_buffer *src_buf); static int del_ptr(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_path *path, int level, int slot); -static int setup_items_for_insert(struct btrfs_trans_handle *trans, - struct btrfs_root *root, struct btrfs_path *path, - struct btrfs_key *cpu_key, u32 *data_size, - u32 total_data, u32 total_size, int nr); - struct btrfs_path *btrfs_alloc_path(void) { @@ -3559,11 +3554,10 @@ out: * to save stack depth by doing the bulk of the work in a function * that doesn't call btrfs_search_slot */ -static noinline_for_stack int -setup_items_for_insert(struct btrfs_trans_handle *trans, - struct btrfs_root *root, struct btrfs_path *path, - struct btrfs_key *cpu_key, u32 *data_size, - u32 total_data, u32 total_size, int nr) +int setup_items_for_insert(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct btrfs_path *path, + struct btrfs_key *cpu_key, u32 *data_size, + u32 total_data, u32 total_size, int nr) { struct btrfs_item *item; int i; diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8f4b81de3ae2..5d25129d0116 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -869,6 +869,7 @@ struct btrfs_block_group_cache { struct reloc_control; struct btrfs_device; struct btrfs_fs_devices; +struct btrfs_delayed_root; struct btrfs_fs_info { u8 fsid[BTRFS_FSID_SIZE]; u8 chunk_tree_uuid[BTRFS_UUID_SIZE]; @@ -895,7 +896,10 @@ struct btrfs_fs_info { /* logical->physical extent mapping */ struct btrfs_mapping_tree mapping_tree; - /* block reservation for extent, checksum and root tree */ + /* + * block reservation for extent, checksum, root tree and + * delayed dir index item + */ struct btrfs_block_rsv global_block_rsv; /* block reservation for delay allocation */ struct btrfs_block_rsv delalloc_block_rsv; @@ -1022,6 +1026,7 @@ struct btrfs_fs_info { * for the sys_munmap function call path */ struct btrfs_workers fixup_workers; + struct btrfs_workers delayed_workers; struct task_struct *transaction_kthread; struct task_struct *cleaner_kthread; int thread_pool_size; @@ -1079,6 +1084,8 @@ struct btrfs_fs_info { /* filesystem state */ u64 fs_state; + + struct btrfs_delayed_root *delayed_root; }; /* @@ -1161,6 +1168,11 @@ struct btrfs_root { /* red-black tree that keeps track of in-memory inodes */ struct rb_root inode_tree; + /* + * radix tree that keeps track of delayed nodes of every inode, + * protected by inode_lock + */ + struct radix_tree_root delayed_nodes_tree; /* * right now this just gets used so that a root has its own devid * for stat. It may be used for more later @@ -2099,6 +2111,13 @@ static inline bool btrfs_mixed_space_info(struct btrfs_space_info *space_info) } /* extent-tree.c */ +static inline u64 btrfs_calc_trans_metadata_size(struct btrfs_root *root, + int num_items) +{ + return (root->leafsize + root->nodesize * (BTRFS_MAX_LEVEL - 1)) * + 3 * num_items; +} + void btrfs_put_block_group(struct btrfs_block_group_cache *cache); int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, struct btrfs_root *root, unsigned long count); @@ -2294,6 +2313,8 @@ void btrfs_release_path(struct btrfs_root *root, struct btrfs_path *p); struct btrfs_path *btrfs_alloc_path(void); void btrfs_free_path(struct btrfs_path *p); void btrfs_set_path_blocking(struct btrfs_path *p); +void btrfs_clear_path_blocking(struct btrfs_path *p, + struct extent_buffer *held); void btrfs_unlock_up_safe(struct btrfs_path *p, int level); int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root, @@ -2305,6 +2326,10 @@ static inline int btrfs_del_item(struct btrfs_trans_handle *trans, return btrfs_del_items(trans, root, path, path->slots[0], 1); } +int setup_items_for_insert(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct btrfs_path *path, + struct btrfs_key *cpu_key, u32 *data_size, + u32 total_data, u32 total_size, int nr); int btrfs_insert_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_key *key, void *data, u32 data_size); int btrfs_insert_some_items(struct btrfs_trans_handle *trans, @@ -2368,7 +2393,7 @@ void btrfs_check_and_init_root_item(struct btrfs_root_item *item); /* dir-item.c */ int btrfs_insert_dir_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, const char *name, - int name_len, u64 dir, + int name_len, struct inode *dir, struct btrfs_key *location, u8 type, u64 index); struct btrfs_dir_item *btrfs_lookup_dir_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c new file mode 100644 index 000000000000..95485318f001 --- /dev/null +++ b/fs/btrfs/delayed-inode.c @@ -0,0 +1,1694 @@ +/* + * Copyright (C) 2011 Fujitsu. All rights reserved. + * Written by Miao Xie + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + */ + +#include +#include "delayed-inode.h" +#include "disk-io.h" +#include "transaction.h" + +#define BTRFS_DELAYED_WRITEBACK 400 +#define BTRFS_DELAYED_BACKGROUND 100 + +static struct kmem_cache *delayed_node_cache; + +int __init btrfs_delayed_inode_init(void) +{ + delayed_node_cache = kmem_cache_create("delayed_node", + sizeof(struct btrfs_delayed_node), + 0, + SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, + NULL); + if (!delayed_node_cache) + return -ENOMEM; + return 0; +} + +void btrfs_delayed_inode_exit(void) +{ + if (delayed_node_cache) + kmem_cache_destroy(delayed_node_cache); +} + +static inline void btrfs_init_delayed_node( + struct btrfs_delayed_node *delayed_node, + struct btrfs_root *root, u64 inode_id) +{ + delayed_node->root = root; + delayed_node->inode_id = inode_id; + atomic_set(&delayed_node->refs, 0); + delayed_node->count = 0; + delayed_node->in_list = 0; + delayed_node->inode_dirty = 0; + delayed_node->ins_root = RB_ROOT; + delayed_node->del_root = RB_ROOT; + mutex_init(&delayed_node->mutex); + delayed_node->index_cnt = 0; + INIT_LIST_HEAD(&delayed_node->n_list); + INIT_LIST_HEAD(&delayed_node->p_list); + delayed_node->bytes_reserved = 0; +} + +static inline int btrfs_is_continuous_delayed_item( + struct btrfs_delayed_item *item1, + struct btrfs_delayed_item *item2) +{ + if (item1->key.type == BTRFS_DIR_INDEX_KEY && + item1->key.objectid == item2->key.objectid && + item1->key.type == item2->key.type && + item1->key.offset + 1 == item2->key.offset) + return 1; + return 0; +} + +static inline struct btrfs_delayed_root *btrfs_get_delayed_root( + struct btrfs_root *root) +{ + return root->fs_info->delayed_root; +} + +static struct btrfs_delayed_node *btrfs_get_or_create_delayed_node( + struct inode *inode) +{ + struct btrfs_delayed_node *node; + struct btrfs_inode *btrfs_inode = BTRFS_I(inode); + struct btrfs_root *root = btrfs_inode->root; + int ret; + +again: + node = ACCESS_ONCE(btrfs_inode->delayed_node); + if (node) { + atomic_inc(&node->refs); /* can be accessed */ + return node; + } + + spin_lock(&root->inode_lock); + node = radix_tree_lookup(&root->delayed_nodes_tree, inode->i_ino); + if (node) { + if (btrfs_inode->delayed_node) { + spin_unlock(&root->inode_lock); + goto again; + } + btrfs_inode->delayed_node = node; + atomic_inc(&node->refs); /* can be accessed */ + atomic_inc(&node->refs); /* cached in the inode */ + spin_unlock(&root->inode_lock); + return node; + } + spin_unlock(&root->inode_lock); + + node = kmem_cache_alloc(delayed_node_cache, GFP_NOFS); + if (!node) + return ERR_PTR(-ENOMEM); + btrfs_init_delayed_node(node, root, inode->i_ino); + + atomic_inc(&node->refs); /* cached in the btrfs inode */ + atomic_inc(&node->refs); /* can be accessed */ + + ret = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM); + if (ret) { + kmem_cache_free(delayed_node_cache, node); + return ERR_PTR(ret); + } + + spin_lock(&root->inode_lock); + ret = radix_tree_insert(&root->delayed_nodes_tree, inode->i_ino, node); + if (ret == -EEXIST) { + kmem_cache_free(delayed_node_cache, node); + spin_unlock(&root->inode_lock); + radix_tree_preload_end(); + goto again; + } + btrfs_inode->delayed_node = node; + spin_unlock(&root->inode_lock); + radix_tree_preload_end(); + + return node; +} + +/* + * Call it when holding delayed_node->mutex + * + * If mod = 1, add this node into the prepared list. + */ +static void btrfs_queue_delayed_node(struct btrfs_delayed_root *root, + struct btrfs_delayed_node *node, + int mod) +{ + spin_lock(&root->lock); + if (node->in_list) { + if (!list_empty(&node->p_list)) + list_move_tail(&node->p_list, &root->prepare_list); + else if (mod) + list_add_tail(&node->p_list, &root->prepare_list); + } else { + list_add_tail(&node->n_list, &root->node_list); + list_add_tail(&node->p_list, &root->prepare_list); + atomic_inc(&node->refs); /* inserted into list */ + root->nodes++; + node->in_list = 1; + } + spin_unlock(&root->lock); +} + +/* Call it when holding delayed_node->mutex */ +static void btrfs_dequeue_delayed_node(struct btrfs_delayed_root *root, + struct btrfs_delayed_node *node) +{ + spin_lock(&root->lock); + if (node->in_list) { + root->nodes--; + atomic_dec(&node->refs); /* not in the list */ + list_del_init(&node->n_list); + if (!list_empty(&node->p_list)) + list_del_init(&node->p_list); + node->in_list = 0; + } + spin_unlock(&root->lock); +} + +struct btrfs_delayed_node *btrfs_first_delayed_node( + struct btrfs_delayed_root *delayed_root) +{ + struct list_head *p; + struct btrfs_delayed_node *node = NULL; + + spin_lock(&delayed_root->lock); + if (list_empty(&delayed_root->node_list)) + goto out; + + p = delayed_root->node_list.next; + node = list_entry(p, struct btrfs_delayed_node, n_list); + atomic_inc(&node->refs); +out: + spin_unlock(&delayed_root->lock); + + return node; +} + +struct btrfs_delayed_node *btrfs_next_delayed_node( + struct btrfs_delayed_node *node) +{ + struct btrfs_delayed_root *delayed_root; + struct list_head *p; + struct btrfs_delayed_node *next = NULL; + + delayed_root = node->root->fs_info->delayed_root; + spin_lock(&delayed_root->lock); + if (!node->in_list) { /* not in the list */ + if (list_empty(&delayed_root->node_list)) + goto out; + p = delayed_root->node_list.next; + } else if (list_is_last(&node->n_list, &delayed_root->node_list)) + goto out; + else + p = node->n_list.next; + + next = list_entry(p, struct btrfs_delayed_node, n_list); + atomic_inc(&next->refs); +out: + spin_unlock(&delayed_root->lock); + + return next; +} + +static void __btrfs_release_delayed_node( + struct btrfs_delayed_node *delayed_node, + int mod) +{ + struct btrfs_delayed_root *delayed_root; + + if (!delayed_node) + return; + + delayed_root = delayed_node->root->fs_info->delayed_root; + + mutex_lock(&delayed_node->mutex); + if (delayed_node->count) + btrfs_queue_delayed_node(delayed_root, delayed_node, mod); + else + btrfs_dequeue_delayed_node(delayed_root, delayed_node); + mutex_unlock(&delayed_node->mutex); + + if (atomic_dec_and_test(&delayed_node->refs)) { + struct btrfs_root *root = delayed_node->root; + spin_lock(&root->inode_lock); + if (atomic_read(&delayed_node->refs) == 0) { + radix_tree_delete(&root->delayed_nodes_tree, + delayed_node->inode_id); + kmem_cache_free(delayed_node_cache, delayed_node); + } + spin_unlock(&root->inode_lock); + } +} + +static inline void btrfs_release_delayed_node(struct btrfs_delayed_node *node) +{ + __btrfs_release_delayed_node(node, 0); +} + +struct btrfs_delayed_node *btrfs_first_prepared_delayed_node( + struct btrfs_delayed_root *delayed_root) +{ + struct list_head *p; + struct btrfs_delayed_node *node = NULL; + + spin_lock(&delayed_root->lock); + if (list_empty(&delayed_root->prepare_list)) + goto out; + + p = delayed_root->prepare_list.next; + list_del_init(p); + node = list_entry(p, struct btrfs_delayed_node, p_list); + atomic_inc(&node->refs); +out: + spin_unlock(&delayed_root->lock); + + return node; +} + +static inline void btrfs_release_prepared_delayed_node( + struct btrfs_delayed_node *node) +{ + __btrfs_release_delayed_node(node, 1); +} + +struct btrfs_delayed_item *btrfs_alloc_delayed_item(u32 data_len) +{ + struct btrfs_delayed_item *item; + item = kmalloc(sizeof(*item) + data_len, GFP_NOFS); + if (item) { + item->data_len = data_len; + item->ins_or_del = 0; + item->bytes_reserved = 0; + item->block_rsv = NULL; + item->delayed_node = NULL; + atomic_set(&item->refs, 1); + } + return item; +} + +/* + * __btrfs_lookup_delayed_item - look up the delayed item by key + * @delayed_node: pointer to the delayed node + * @key: the key to look up + * @prev: used to store the prev item if the right item isn't found + * @next: used to store the next item if the right item isn't found + * + * Note: if we don't find the right item, we will return the prev item and + * the next item. + */ +static struct btrfs_delayed_item *__btrfs_lookup_delayed_item( + struct rb_root *root, + struct btrfs_key *key, + struct btrfs_delayed_item **prev, + struct btrfs_delayed_item **next) +{ + struct rb_node *node, *prev_node = NULL; + struct btrfs_delayed_item *delayed_item = NULL; + int ret = 0; + + node = root->rb_node; + + while (node) { + delayed_item = rb_entry(node, struct btrfs_delayed_item, + rb_node); + prev_node = node; + ret = btrfs_comp_cpu_keys(&delayed_item->key, key); + if (ret < 0) + node = node->rb_right; + else if (ret > 0) + node = node->rb_left; + else + return delayed_item; + } + + if (prev) { + if (!prev_node) + *prev = NULL; + else if (ret < 0) + *prev = delayed_item; + else if ((node = rb_prev(prev_node)) != NULL) { + *prev = rb_entry(node, struct btrfs_delayed_item, + rb_node); + } else + *prev = NULL; + } + + if (next) { + if (!prev_node) + *next = NULL; + else if (ret > 0) + *next = delayed_item; + else if ((node = rb_next(prev_node)) != NULL) { + *next = rb_entry(node, struct btrfs_delayed_item, + rb_node); + } else + *next = NULL; + } + return NULL; +} + +struct btrfs_delayed_item *__btrfs_lookup_delayed_insertion_item( + struct btrfs_delayed_node *delayed_node, + struct btrfs_key *key) +{ + struct btrfs_delayed_item *item; + + item = __btrfs_lookup_delayed_item(&delayed_node->ins_root, key, + NULL, NULL); + return item; +} + +struct btrfs_delayed_item *__btrfs_lookup_delayed_deletion_item( + struct btrfs_delayed_node *delayed_node, + struct btrfs_key *key) +{ + struct btrfs_delayed_item *item; + + item = __btrfs_lookup_delayed_item(&delayed_node->del_root, key, + NULL, NULL); + return item; +} + +struct btrfs_delayed_item *__btrfs_search_delayed_insertion_item( + struct btrfs_delayed_node *delayed_node, + struct btrfs_key *key) +{ + struct btrfs_delayed_item *item, *next; + + item = __btrfs_lookup_delayed_item(&delayed_node->ins_root, key, + NULL, &next); + if (!item) + item = next; + + return item; +} + +struct btrfs_delayed_item *__btrfs_search_delayed_deletion_item( + struct btrfs_delayed_node *delayed_node, + struct btrfs_key *key) +{ + struct btrfs_delayed_item *item, *next; + + item = __btrfs_lookup_delayed_item(&delayed_node->del_root, key, + NULL, &next); + if (!item) + item = next; + + return item; +} + +static int __btrfs_add_delayed_item(struct btrfs_delayed_node *delayed_node, + struct btrfs_delayed_item *ins, + int action) +{ + struct rb_node **p, *node; + struct rb_node *parent_node = NULL; + struct rb_root *root; + struct btrfs_delayed_item *item; + int cmp; + + if (action == BTRFS_DELAYED_INSERTION_ITEM) + root = &delayed_node->ins_root; + else if (action == BTRFS_DELAYED_DELETION_ITEM) + root = &delayed_node->del_root; + else + BUG(); + p = &root->rb_node; + node = &ins->rb_node; + + while (*p) { + parent_node = *p; + item = rb_entry(parent_node, struct btrfs_delayed_item, + rb_node); + + cmp = btrfs_comp_cpu_keys(&item->key, &ins->key); + if (cmp < 0) + p = &(*p)->rb_right; + else if (cmp > 0) + p = &(*p)->rb_left; + else + return -EEXIST; + } + + rb_link_node(node, parent_node, p); + rb_insert_color(node, root); + ins->delayed_node = delayed_node; + ins->ins_or_del = action; + + if (ins->key.type == BTRFS_DIR_INDEX_KEY && + action == BTRFS_DELAYED_INSERTION_ITEM && + ins->key.offset >= delayed_node->index_cnt) + delayed_node->index_cnt = ins->key.offset + 1; + + delayed_node->count++; + atomic_inc(&delayed_node->root->fs_info->delayed_root->items); + return 0; +} + +static int __btrfs_add_delayed_insertion_item(struct btrfs_delayed_node *node, + struct btrfs_delayed_item *item) +{ + return __btrfs_add_delayed_item(node, item, + BTRFS_DELAYED_INSERTION_ITEM); +} + +static int __btrfs_add_delayed_deletion_item(struct btrfs_delayed_node *node, + struct btrfs_delayed_item *item) +{ + return __btrfs_add_delayed_item(node, item, + BTRFS_DELAYED_DELETION_ITEM); +} + +static void __btrfs_remove_delayed_item(struct btrfs_delayed_item *delayed_item) +{ + struct rb_root *root; + struct btrfs_delayed_root *delayed_root; + + delayed_root = delayed_item->delayed_node->root->fs_info->delayed_root; + + BUG_ON(!delayed_root); + BUG_ON(delayed_item->ins_or_del != BTRFS_DELAYED_DELETION_ITEM && + delayed_item->ins_or_del != BTRFS_DELAYED_INSERTION_ITEM); + + if (delayed_item->ins_or_del == BTRFS_DELAYED_INSERTION_ITEM) + root = &delayed_item->delayed_node->ins_root; + else + root = &delayed_item->delayed_node->del_root; + + rb_erase(&delayed_item->rb_node, root); + delayed_item->delayed_node->count--; + atomic_dec(&delayed_root->items); + if (atomic_read(&delayed_root->items) < BTRFS_DELAYED_BACKGROUND && + waitqueue_active(&delayed_root->wait)) + wake_up(&delayed_root->wait); +} + +static void btrfs_release_delayed_item(struct btrfs_delayed_item *item) +{ + if (item) { + __btrfs_remove_delayed_item(item); + if (atomic_dec_and_test(&item->refs)) + kfree(item); + } +} + +struct btrfs_delayed_item *__btrfs_first_delayed_insertion_item( + struct btrfs_delayed_node *delayed_node) +{ + struct rb_node *p; + struct btrfs_delayed_item *item = NULL; + + p = rb_first(&delayed_node->ins_root); + if (p) + item = rb_entry(p, struct btrfs_delayed_item, rb_node); + + return item; +} + +struct btrfs_delayed_item *__btrfs_first_delayed_deletion_item( + struct btrfs_delayed_node *delayed_node) +{ + struct rb_node *p; + struct btrfs_delayed_item *item = NULL; + + p = rb_first(&delayed_node->del_root); + if (p) + item = rb_entry(p, struct btrfs_delayed_item, rb_node); + + return item; +} + +struct btrfs_delayed_item *__btrfs_next_delayed_item( + struct btrfs_delayed_item *item) +{ + struct rb_node *p; + struct btrfs_delayed_item *next = NULL; + + p = rb_next(&item->rb_node); + if (p) + next = rb_entry(p, struct btrfs_delayed_item, rb_node); + + return next; +} + +static inline struct btrfs_delayed_node *btrfs_get_delayed_node( + struct inode *inode) +{ + struct btrfs_inode *btrfs_inode = BTRFS_I(inode); + struct btrfs_delayed_node *delayed_node; + + delayed_node = btrfs_inode->delayed_node; + if (delayed_node) + atomic_inc(&delayed_node->refs); + + return delayed_node; +} + +static inline struct btrfs_root *btrfs_get_fs_root(struct btrfs_root *root, + u64 root_id) +{ + struct btrfs_key root_key; + + if (root->objectid == root_id) + return root; + + root_key.objectid = root_id; + root_key.type = BTRFS_ROOT_ITEM_KEY; + root_key.offset = (u64)-1; + return btrfs_read_fs_root_no_name(root->fs_info, &root_key); +} + +static int btrfs_delayed_item_reserve_metadata(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_delayed_item *item) +{ + struct btrfs_block_rsv *src_rsv; + struct btrfs_block_rsv *dst_rsv; + u64 num_bytes; + int ret; + + if (!trans->bytes_reserved) + return 0; + + src_rsv = trans->block_rsv; + dst_rsv = &root->fs_info->global_block_rsv; + + num_bytes = btrfs_calc_trans_metadata_size(root, 1); + ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes); + if (!ret) { + item->bytes_reserved = num_bytes; + item->block_rsv = dst_rsv; + } + + return ret; +} + +static void btrfs_delayed_item_release_metadata(struct btrfs_root *root, + struct btrfs_delayed_item *item) +{ + if (!item->bytes_reserved) + return; + + btrfs_block_rsv_release(root, item->block_rsv, + item->bytes_reserved); +} + +static int btrfs_delayed_inode_reserve_metadata( + struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_delayed_node *node) +{ + struct btrfs_block_rsv *src_rsv; + struct btrfs_block_rsv *dst_rsv; + u64 num_bytes; + int ret; + + if (!trans->bytes_reserved) + return 0; + + src_rsv = trans->block_rsv; + dst_rsv = &root->fs_info->global_block_rsv; + + num_bytes = btrfs_calc_trans_metadata_size(root, 1); + ret = btrfs_block_rsv_migrate(src_rsv, dst_rsv, num_bytes); + if (!ret) + node->bytes_reserved = num_bytes; + + return ret; +} + +static void btrfs_delayed_inode_release_metadata(struct btrfs_root *root, + struct btrfs_delayed_node *node) +{ + struct btrfs_block_rsv *rsv; + + if (!node->bytes_reserved) + return; + + rsv = &root->fs_info->global_block_rsv; + btrfs_block_rsv_release(root, rsv, + node->bytes_reserved); + node->bytes_reserved = 0; +} + +/* + * This helper will insert some continuous items into the same leaf according + * to the free space of the leaf. + */ +static int btrfs_batch_insert_items(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, + struct btrfs_delayed_item *item) +{ + struct btrfs_delayed_item *curr, *next; + int free_space; + int total_data_size = 0, total_size = 0; + struct extent_buffer *leaf; + char *data_ptr; + struct btrfs_key *keys; + u32 *data_size; + struct list_head head; + int slot; + int nitems; + int i; + int ret = 0; + + BUG_ON(!path->nodes[0]); + + leaf = path->nodes[0]; + free_space = btrfs_leaf_free_space(root, leaf); + INIT_LIST_HEAD(&head); + + next = item; + + /* + * count the number of the continuous items that we can insert in batch + */ + while (total_size + next->data_len + sizeof(struct btrfs_item) <= + free_space) { + total_data_size += next->data_len; + total_size += next->data_len + sizeof(struct btrfs_item); + list_add_tail(&next->tree_list, &head); + nitems++; + + curr = next; + next = __btrfs_next_delayed_item(curr); + if (!next) + break; + + if (!btrfs_is_continuous_delayed_item(curr, next)) + break; + } + + if (!nitems) { + ret = 0; + goto out; + } + + /* + * we need allocate some memory space, but it might cause the task + * to sleep, so we set all locked nodes in the path to blocking locks + * first. + */ + btrfs_set_path_blocking(path); + + keys = kmalloc(sizeof(struct btrfs_key) * nitems, GFP_NOFS); + if (!keys) { + ret = -ENOMEM; + goto out; + } + + data_size = kmalloc(sizeof(u32) * nitems, GFP_NOFS); + if (!data_size) { + ret = -ENOMEM; + goto error; + } + + /* get keys of all the delayed items */ + i = 0; + list_for_each_entry(next, &head, tree_list) { + keys[i] = next->key; + data_size[i] = next->data_len; + i++; + } + + /* reset all the locked nodes in the patch to spinning locks. */ + btrfs_clear_path_blocking(path, NULL); + + /* insert the keys of the items */ + ret = setup_items_for_insert(trans, root, path, keys, data_size, + total_data_size, total_size, nitems); + if (ret) + goto error; + + /* insert the dir index items */ + slot = path->slots[0]; + list_for_each_entry_safe(curr, next, &head, tree_list) { + data_ptr = btrfs_item_ptr(leaf, slot, char); + write_extent_buffer(leaf, &curr->data, + (unsigned long)data_ptr, + curr->data_len); + slot++; + + btrfs_delayed_item_release_metadata(root, curr); + + list_del(&curr->tree_list); + btrfs_release_delayed_item(curr); + } + +error: + kfree(data_size); + kfree(keys); +out: + return ret; +} + +/* + * This helper can just do simple insertion that needn't extend item for new + * data, such as directory name index insertion, inode insertion. + */ +static int btrfs_insert_delayed_item(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, + struct btrfs_delayed_item *delayed_item) +{ + struct extent_buffer *leaf; + struct btrfs_item *item; + char *ptr; + int ret; + + ret = btrfs_insert_empty_item(trans, root, path, &delayed_item->key, + delayed_item->data_len); + if (ret < 0 && ret != -EEXIST) + return ret; + + leaf = path->nodes[0]; + + item = btrfs_item_nr(leaf, path->slots[0]); + ptr = btrfs_item_ptr(leaf, path->slots[0], char); + + write_extent_buffer(leaf, delayed_item->data, (unsigned long)ptr, + delayed_item->data_len); + btrfs_mark_buffer_dirty(leaf); + + btrfs_delayed_item_release_metadata(root, delayed_item); + return 0; +} + +/* + * we insert an item first, then if there are some continuous items, we try + * to insert those items into the same leaf. + */ +static int btrfs_insert_delayed_items(struct btrfs_trans_handle *trans, + struct btrfs_path *path, + struct btrfs_root *root, + struct btrfs_delayed_node *node) +{ + struct btrfs_delayed_item *curr, *prev; + int ret = 0; + +do_again: + mutex_lock(&node->mutex); + curr = __btrfs_first_delayed_insertion_item(node); + if (!curr) + goto insert_end; + + ret = btrfs_insert_delayed_item(trans, root, path, curr); + if (ret < 0) { + btrfs_release_path(root, path); + goto insert_end; + } + + prev = curr; + curr = __btrfs_next_delayed_item(prev); + if (curr && btrfs_is_continuous_delayed_item(prev, curr)) { + /* insert the continuous items into the same leaf */ + path->slots[0]++; + btrfs_batch_insert_items(trans, root, path, curr); + } + btrfs_release_delayed_item(prev); + btrfs_mark_buffer_dirty(path->nodes[0]); + + btrfs_release_path(root, path); + mutex_unlock(&node->mutex); + goto do_again; + +insert_end: + mutex_unlock(&node->mutex); + return ret; +} + +static int btrfs_batch_delete_items(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, + struct btrfs_delayed_item *item) +{ + struct btrfs_delayed_item *curr, *next; + struct extent_buffer *leaf; + struct btrfs_key key; + struct list_head head; + int nitems, i, last_item; + int ret = 0; + + BUG_ON(!path->nodes[0]); + + leaf = path->nodes[0]; + + i = path->slots[0]; + last_item = btrfs_header_nritems(leaf) - 1; + if (i > last_item) + return -ENOENT; /* FIXME: Is errno suitable? */ + + next = item; + INIT_LIST_HEAD(&head); + btrfs_item_key_to_cpu(leaf, &key, i); + nitems = 0; + /* + * count the number of the dir index items that we can delete in batch + */ + while (btrfs_comp_cpu_keys(&next->key, &key) == 0) { + list_add_tail(&next->tree_list, &head); + nitems++; + + curr = next; + next = __btrfs_next_delayed_item(curr); + if (!next) + break; + + if (!btrfs_is_continuous_delayed_item(curr, next)) + break; + + i++; + if (i > last_item) + break; + btrfs_item_key_to_cpu(leaf, &key, i); + } + + if (!nitems) + return 0; + + ret = btrfs_del_items(trans, root, path, path->slots[0], nitems); + if (ret) + goto out; + + list_for_each_entry_safe(curr, next, &head, tree_list) { + btrfs_delayed_item_release_metadata(root, curr); + list_del(&curr->tree_list); + btrfs_release_delayed_item(curr); + } + +out: + return ret; +} + +static int btrfs_delete_delayed_items(struct btrfs_trans_handle *trans, + struct btrfs_path *path, + struct btrfs_root *root, + struct btrfs_delayed_node *node) +{ + struct btrfs_delayed_item *curr, *prev; + int ret = 0; + +do_again: + mutex_lock(&node->mutex); + curr = __btrfs_first_delayed_deletion_item(node); + if (!curr) + goto delete_fail; + + ret = btrfs_search_slot(trans, root, &curr->key, path, -1, 1); + if (ret < 0) + goto delete_fail; + else if (ret > 0) { + /* + * can't find the item which the node points to, so this node + * is invalid, just drop it. + */ + prev = curr; + curr = __btrfs_next_delayed_item(prev); + btrfs_release_delayed_item(prev); + ret = 0; + btrfs_release_path(root, path); + if (curr) + goto do_again; + else + goto delete_fail; + } + + btrfs_batch_delete_items(trans, root, path, curr); + btrfs_release_path(root, path); + mutex_unlock(&node->mutex); + goto do_again; + +delete_fail: + btrfs_release_path(root, path); + mutex_unlock(&node->mutex); + return ret; +} + +static void btrfs_release_delayed_inode(struct btrfs_delayed_node *delayed_node) +{ + struct btrfs_delayed_root *delayed_root; + + if (delayed_node && delayed_node->inode_dirty) { + BUG_ON(!delayed_node->root); + delayed_node->inode_dirty = 0; + delayed_node->count--; + + delayed_root = delayed_node->root->fs_info->delayed_root; + atomic_dec(&delayed_root->items); + if (atomic_read(&delayed_root->items) < + BTRFS_DELAYED_BACKGROUND && + waitqueue_active(&delayed_root->wait)) + wake_up(&delayed_root->wait); + } +} + +static int btrfs_update_delayed_inode(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_path *path, + struct btrfs_delayed_node *node) +{ + struct btrfs_key key; + struct btrfs_inode_item *inode_item; + struct extent_buffer *leaf; + int ret; + + mutex_lock(&node->mutex); + if (!node->inode_dirty) { + mutex_unlock(&node->mutex); + return 0; + } + + key.objectid = node->inode_id; + btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY); + key.offset = 0; + ret = btrfs_lookup_inode(trans, root, path, &key, 1); + if (ret > 0) { + btrfs_release_path(root, path); + mutex_unlock(&node->mutex); + return -ENOENT; + } else if (ret < 0) { + mutex_unlock(&node->mutex); + return ret; + } + + btrfs_unlock_up_safe(path, 1); + leaf = path->nodes[0]; + inode_item = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_inode_item); + write_extent_buffer(leaf, &node->inode_item, (unsigned long)inode_item, + sizeof(struct btrfs_inode_item)); + btrfs_mark_buffer_dirty(leaf); + btrfs_release_path(root, path); + + btrfs_delayed_inode_release_metadata(root, node); + btrfs_release_delayed_inode(node); + mutex_unlock(&node->mutex); + + return 0; +} + +/* Called when committing the transaction. */ +int btrfs_run_delayed_items(struct btrfs_trans_handle *trans, + struct btrfs_root *root) +{ + struct btrfs_delayed_root *delayed_root; + struct btrfs_delayed_node *curr_node, *prev_node; + struct btrfs_path *path; + int ret = 0; + + path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + path->leave_spinning = 1; + + delayed_root = btrfs_get_delayed_root(root); + + curr_node = btrfs_first_delayed_node(delayed_root); + while (curr_node) { + root = curr_node->root; + ret = btrfs_insert_delayed_items(trans, path, root, + curr_node); + if (!ret) + ret = btrfs_delete_delayed_items(trans, path, root, + curr_node); + if (!ret) + ret = btrfs_update_delayed_inode(trans, root, path, + curr_node); + if (ret) { + btrfs_release_delayed_node(curr_node); + break; + } + + prev_node = curr_node; + curr_node = btrfs_next_delayed_node(curr_node); + btrfs_release_delayed_node(prev_node); + } + + btrfs_free_path(path); + return ret; +} + +static int __btrfs_commit_inode_delayed_items(struct btrfs_trans_handle *trans, + struct btrfs_delayed_node *node) +{ + struct btrfs_path *path; + int ret; + + path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + path->leave_spinning = 1; + + ret = btrfs_insert_delayed_items(trans, path, node->root, node); + if (!ret) + ret = btrfs_delete_delayed_items(trans, path, node->root, node); + if (!ret) + ret = btrfs_update_delayed_inode(trans, node->root, path, node); + btrfs_free_path(path); + + return ret; +} + +int btrfs_commit_inode_delayed_items(struct btrfs_trans_handle *trans, + struct inode *inode) +{ + struct btrfs_delayed_node *delayed_node = btrfs_get_delayed_node(inode); + int ret; + + if (!delayed_node) + return 0; + + mutex_lock(&delayed_node->mutex); + if (!delayed_node->count) { + mutex_unlock(&delayed_node->mutex); + btrfs_release_delayed_node(delayed_node); + return 0; + } + mutex_unlock(&delayed_node->mutex); + + ret = __btrfs_commit_inode_delayed_items(trans, delayed_node); + btrfs_release_delayed_node(delayed_node); + return ret; +} + +void btrfs_remove_delayed_node(struct inode *inode) +{ + struct btrfs_delayed_node *delayed_node; + + delayed_node = ACCESS_ONCE(BTRFS_I(inode)->delayed_node); + if (!delayed_node) + return; + + BTRFS_I(inode)->delayed_node = NULL; + btrfs_release_delayed_node(delayed_node); +} + +struct btrfs_async_delayed_node { + struct btrfs_root *root; + struct btrfs_delayed_node *delayed_node; + struct btrfs_work work; +}; + +static void btrfs_async_run_delayed_node_done(struct btrfs_work *work) +{ + struct btrfs_async_delayed_node *async_node; + struct btrfs_trans_handle *trans; + struct btrfs_path *path; + struct btrfs_delayed_node *delayed_node = NULL; + struct btrfs_root *root; + unsigned long nr = 0; + int need_requeue = 0; + int ret; + + async_node = container_of(work, struct btrfs_async_delayed_node, work); + + path = btrfs_alloc_path(); + if (!path) + goto out; + path->leave_spinning = 1; + + delayed_node = async_node->delayed_node; + root = delayed_node->root; + + trans = btrfs_join_transaction(root, 0); + if (IS_ERR(trans)) + goto free_path; + + ret = btrfs_insert_delayed_items(trans, path, root, delayed_node); + if (!ret) + ret = btrfs_delete_delayed_items(trans, path, root, + delayed_node); + + if (!ret) + btrfs_update_delayed_inode(trans, root, path, delayed_node); + + /* + * Maybe new delayed items have been inserted, so we need requeue + * the work. Besides that, we must dequeue the empty delayed nodes + * to avoid the race between delayed items balance and the worker. + * The race like this: + * Task1 Worker thread + * count == 0, needn't requeue + * also needn't insert the + * delayed node into prepare + * list again. + * add lots of delayed items + * queue the delayed node + * already in the list, + * and not in the prepare + * list, it means the delayed + * node is being dealt with + * by the worker. + * do delayed items balance + * the delayed node is being + * dealt with by the worker + * now, just wait. + * the worker goto idle. + * Task1 will sleep until the transaction is commited. + */ + mutex_lock(&delayed_node->mutex); + if (delayed_node->count) + need_requeue = 1; + else + btrfs_dequeue_delayed_node(root->fs_info->delayed_root, + delayed_node); + mutex_unlock(&delayed_node->mutex); + + nr = trans->blocks_used; + + btrfs_end_transaction_dmeta(trans, root); + __btrfs_btree_balance_dirty(root, nr); +free_path: + btrfs_free_path(path); +out: + if (need_requeue) + btrfs_requeue_work(&async_node->work); + else { + btrfs_release_prepared_delayed_node(delayed_node); + kfree(async_node); + } +} + +static int btrfs_wq_run_delayed_node(struct btrfs_delayed_root *delayed_root, + struct btrfs_root *root, int all) +{ + struct btrfs_async_delayed_node *async_node; + struct btrfs_delayed_node *curr; + int count = 0; + +again: + curr = btrfs_first_prepared_delayed_node(delayed_root); + if (!curr) + return 0; + + async_node = kmalloc(sizeof(*async_node), GFP_NOFS); + if (!async_node) { + btrfs_release_prepared_delayed_node(curr); + return -ENOMEM; + } + + async_node->root = root; + async_node->delayed_node = curr; + + async_node->work.func = btrfs_async_run_delayed_node_done; + async_node->work.flags = 0; + + btrfs_queue_worker(&root->fs_info->delayed_workers, &async_node->work); + count++; + + if (all || count < 4) + goto again; + + return 0; +} + +void btrfs_balance_delayed_items(struct btrfs_root *root) +{ + struct btrfs_delayed_root *delayed_root; + + delayed_root = btrfs_get_delayed_root(root); + + if (atomic_read(&delayed_root->items) < BTRFS_DELAYED_BACKGROUND) + return; + + if (atomic_read(&delayed_root->items) >= BTRFS_DELAYED_WRITEBACK) { + int ret; + ret = btrfs_wq_run_delayed_node(delayed_root, root, 1); + if (ret) + return; + + wait_event_interruptible_timeout( + delayed_root->wait, + (atomic_read(&delayed_root->items) < + BTRFS_DELAYED_BACKGROUND), + HZ); + return; + } + + btrfs_wq_run_delayed_node(delayed_root, root, 0); +} + +int btrfs_insert_delayed_dir_index(struct btrfs_trans_handle *trans, + struct btrfs_root *root, const char *name, + int name_len, struct inode *dir, + struct btrfs_disk_key *disk_key, u8 type, + u64 index) +{ + struct btrfs_delayed_node *delayed_node; + struct btrfs_delayed_item *delayed_item; + struct btrfs_dir_item *dir_item; + int ret; + + delayed_node = btrfs_get_or_create_delayed_node(dir); + if (IS_ERR(delayed_node)) + return PTR_ERR(delayed_node); + + delayed_item = btrfs_alloc_delayed_item(sizeof(*dir_item) + name_len); + if (!delayed_item) { + ret = -ENOMEM; + goto release_node; + } + + ret = btrfs_delayed_item_reserve_metadata(trans, root, delayed_item); + /* + * we have reserved enough space when we start a new transaction, + * so reserving metadata failure is impossible + */ + BUG_ON(ret); + + delayed_item->key.objectid = dir->i_ino; + btrfs_set_key_type(&delayed_item->key, BTRFS_DIR_INDEX_KEY); + delayed_item->key.offset = index; + + dir_item = (struct btrfs_dir_item *)delayed_item->data; + dir_item->location = *disk_key; + dir_item->transid = cpu_to_le64(trans->transid); + dir_item->data_len = 0; + dir_item->name_len = cpu_to_le16(name_len); + dir_item->type = type; + memcpy((char *)(dir_item + 1), name, name_len); + + mutex_lock(&delayed_node->mutex); + ret = __btrfs_add_delayed_insertion_item(delayed_node, delayed_item); + if (unlikely(ret)) { + printk(KERN_ERR "err add delayed dir index item(name: %s) into " + "the insertion tree of the delayed node" + "(root id: %llu, inode id: %llu, errno: %d)\n", + name, + (unsigned long long)delayed_node->root->objectid, + (unsigned long long)delayed_node->inode_id, + ret); + BUG(); + } + mutex_unlock(&delayed_node->mutex); + +release_node: + btrfs_release_delayed_node(delayed_node); + return ret; +} + +static int btrfs_delete_delayed_insertion_item(struct btrfs_root *root, + struct btrfs_delayed_node *node, + struct btrfs_key *key) +{ + struct btrfs_delayed_item *item; + + mutex_lock(&node->mutex); + item = __btrfs_lookup_delayed_insertion_item(node, key); + if (!item) { + mutex_unlock(&node->mutex); + return 1; + } + + btrfs_delayed_item_release_metadata(root, item); + btrfs_release_delayed_item(item); + mutex_unlock(&node->mutex); + return 0; +} + +int btrfs_delete_delayed_dir_index(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct inode *dir, + u64 index) +{ + struct btrfs_delayed_node *node; + struct btrfs_delayed_item *item; + struct btrfs_key item_key; + int ret; + + node = btrfs_get_or_create_delayed_node(dir); + if (IS_ERR(node)) + return PTR_ERR(node); + + item_key.objectid = dir->i_ino; + btrfs_set_key_type(&item_key, BTRFS_DIR_INDEX_KEY); + item_key.offset = index; + + ret = btrfs_delete_delayed_insertion_item(root, node, &item_key); + if (!ret) + goto end; + + item = btrfs_alloc_delayed_item(0); + if (!item) { + ret = -ENOMEM; + goto end; + } + + item->key = item_key; + + ret = btrfs_delayed_item_reserve_metadata(trans, root, item); + /* + * we have reserved enough space when we start a new transaction, + * so reserving metadata failure is impossible. + */ + BUG_ON(ret); + + mutex_lock(&node->mutex); + ret = __btrfs_add_delayed_deletion_item(node, item); + if (unlikely(ret)) { + printk(KERN_ERR "err add delayed dir index item(index: %llu) " + "into the deletion tree of the delayed node" + "(root id: %llu, inode id: %llu, errno: %d)\n", + (unsigned long long)index, + (unsigned long long)node->root->objectid, + (unsigned long long)node->inode_id, + ret); + BUG(); + } + mutex_unlock(&node->mutex); +end: + btrfs_release_delayed_node(node); + return ret; +} + +int btrfs_inode_delayed_dir_index_count(struct inode *inode) +{ + struct btrfs_delayed_node *delayed_node = BTRFS_I(inode)->delayed_node; + int ret = 0; + + if (!delayed_node) + return -ENOENT; + + /* + * Since we have held i_mutex of this directory, it is impossible that + * a new directory index is added into the delayed node and index_cnt + * is updated now. So we needn't lock the delayed node. + */ + if (!delayed_node->index_cnt) + return -EINVAL; + + BTRFS_I(inode)->index_cnt = delayed_node->index_cnt; + return ret; +} + +void btrfs_get_delayed_items(struct inode *inode, struct list_head *ins_list, + struct list_head *del_list) +{ + struct btrfs_delayed_node *delayed_node; + struct btrfs_delayed_item *item; + + delayed_node = btrfs_get_delayed_node(inode); + if (!delayed_node) + return; + + mutex_lock(&delayed_node->mutex); + item = __btrfs_first_delayed_insertion_item(delayed_node); + while (item) { + atomic_inc(&item->refs); + list_add_tail(&item->readdir_list, ins_list); + item = __btrfs_next_delayed_item(item); + } + + item = __btrfs_first_delayed_deletion_item(delayed_node); + while (item) { + atomic_inc(&item->refs); + list_add_tail(&item->readdir_list, del_list); + item = __btrfs_next_delayed_item(item); + } + mutex_unlock(&delayed_node->mutex); + /* + * This delayed node is still cached in the btrfs inode, so refs + * must be > 1 now, and we needn't check it is going to be freed + * or not. + * + * Besides that, this function is used to read dir, we do not + * insert/delete delayed items in this period. So we also needn't + * requeue or dequeue this delayed node. + */ + atomic_dec(&delayed_node->refs); +} + +void btrfs_put_delayed_items(struct list_head *ins_list, + struct list_head *del_list) +{ + struct btrfs_delayed_item *curr, *next; + + list_for_each_entry_safe(curr, next, ins_list, readdir_list) { + list_del(&curr->readdir_list); + if (atomic_dec_and_test(&curr->refs)) + kfree(curr); + } + + list_for_each_entry_safe(curr, next, del_list, readdir_list) { + list_del(&curr->readdir_list); + if (atomic_dec_and_test(&curr->refs)) + kfree(curr); + } +} + +int btrfs_should_delete_dir_index(struct list_head *del_list, + u64 index) +{ + struct btrfs_delayed_item *curr, *next; + int ret; + + if (list_empty(del_list)) + return 0; + + list_for_each_entry_safe(curr, next, del_list, readdir_list) { + if (curr->key.offset > index) + break; + + list_del(&curr->readdir_list); + ret = (curr->key.offset == index); + + if (atomic_dec_and_test(&curr->refs)) + kfree(curr); + + if (ret) + return 1; + else + continue; + } + return 0; +} + +/* + * btrfs_readdir_delayed_dir_index - read dir info stored in the delayed tree + * + */ +int btrfs_readdir_delayed_dir_index(struct file *filp, void *dirent, + filldir_t filldir, + struct list_head *ins_list) +{ + struct btrfs_dir_item *di; + struct btrfs_delayed_item *curr, *next; + struct btrfs_key location; + char *name; + int name_len; + int over = 0; + unsigned char d_type; + + if (list_empty(ins_list)) + return 0; + + /* + * Changing the data of the delayed item is impossible. So + * we needn't lock them. And we have held i_mutex of the + * directory, nobody can delete any directory indexes now. + */ + list_for_each_entry_safe(curr, next, ins_list, readdir_list) { + list_del(&curr->readdir_list); + + if (curr->key.offset < filp->f_pos) { + if (atomic_dec_and_test(&curr->refs)) + kfree(curr); + continue; + } + + filp->f_pos = curr->key.offset; + + di = (struct btrfs_dir_item *)curr->data; + name = (char *)(di + 1); + name_len = le16_to_cpu(di->name_len); + + d_type = btrfs_filetype_table[di->type]; + btrfs_disk_key_to_cpu(&location, &di->location); + + over = filldir(dirent, name, name_len, curr->key.offset, + location.objectid, d_type); + + if (atomic_dec_and_test(&curr->refs)) + kfree(curr); + + if (over) + return 1; + } + return 0; +} + +BTRFS_SETGET_STACK_FUNCS(stack_inode_generation, struct btrfs_inode_item, + generation, 64); +BTRFS_SETGET_STACK_FUNCS(stack_inode_sequence, struct btrfs_inode_item, + sequence, 64); +BTRFS_SETGET_STACK_FUNCS(stack_inode_transid, struct btrfs_inode_item, + transid, 64); +BTRFS_SETGET_STACK_FUNCS(stack_inode_size, struct btrfs_inode_item, size, 64); +BTRFS_SETGET_STACK_FUNCS(stack_inode_nbytes, struct btrfs_inode_item, + nbytes, 64); +BTRFS_SETGET_STACK_FUNCS(stack_inode_block_group, struct btrfs_inode_item, + block_group, 64); +BTRFS_SETGET_STACK_FUNCS(stack_inode_nlink, struct btrfs_inode_item, nlink, 32); +BTRFS_SETGET_STACK_FUNCS(stack_inode_uid, struct btrfs_inode_item, uid, 32); +BTRFS_SETGET_STACK_FUNCS(stack_inode_gid, struct btrfs_inode_item, gid, 32); +BTRFS_SETGET_STACK_FUNCS(stack_inode_mode, struct btrfs_inode_item, mode, 32); +BTRFS_SETGET_STACK_FUNCS(stack_inode_rdev, struct btrfs_inode_item, rdev, 64); +BTRFS_SETGET_STACK_FUNCS(stack_inode_flags, struct btrfs_inode_item, flags, 64); + +BTRFS_SETGET_STACK_FUNCS(stack_timespec_sec, struct btrfs_timespec, sec, 64); +BTRFS_SETGET_STACK_FUNCS(stack_timespec_nsec, struct btrfs_timespec, nsec, 32); + +static void fill_stack_inode_item(struct btrfs_trans_handle *trans, + struct btrfs_inode_item *inode_item, + struct inode *inode) +{ + btrfs_set_stack_inode_uid(inode_item, inode->i_uid); + btrfs_set_stack_inode_gid(inode_item, inode->i_gid); + btrfs_set_stack_inode_size(inode_item, BTRFS_I(inode)->disk_i_size); + btrfs_set_stack_inode_mode(inode_item, inode->i_mode); + btrfs_set_stack_inode_nlink(inode_item, inode->i_nlink); + btrfs_set_stack_inode_nbytes(inode_item, inode_get_bytes(inode)); + btrfs_set_stack_inode_generation(inode_item, + BTRFS_I(inode)->generation); + btrfs_set_stack_inode_sequence(inode_item, BTRFS_I(inode)->sequence); + btrfs_set_stack_inode_transid(inode_item, trans->transid); + btrfs_set_stack_inode_rdev(inode_item, inode->i_rdev); + btrfs_set_stack_inode_flags(inode_item, BTRFS_I(inode)->flags); + btrfs_set_stack_inode_block_group(inode_item, + BTRFS_I(inode)->block_group); + + btrfs_set_stack_timespec_sec(btrfs_inode_atime(inode_item), + inode->i_atime.tv_sec); + btrfs_set_stack_timespec_nsec(btrfs_inode_atime(inode_item), + inode->i_atime.tv_nsec); + + btrfs_set_stack_timespec_sec(btrfs_inode_mtime(inode_item), + inode->i_mtime.tv_sec); + btrfs_set_stack_timespec_nsec(btrfs_inode_mtime(inode_item), + inode->i_mtime.tv_nsec); + + btrfs_set_stack_timespec_sec(btrfs_inode_ctime(inode_item), + inode->i_ctime.tv_sec); + btrfs_set_stack_timespec_nsec(btrfs_inode_ctime(inode_item), + inode->i_ctime.tv_nsec); +} + +int btrfs_delayed_update_inode(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct inode *inode) +{ + struct btrfs_delayed_node *delayed_node; + int ret; + + delayed_node = btrfs_get_or_create_delayed_node(inode); + if (IS_ERR(delayed_node)) + return PTR_ERR(delayed_node); + + mutex_lock(&delayed_node->mutex); + if (delayed_node->inode_dirty) { + fill_stack_inode_item(trans, &delayed_node->inode_item, inode); + goto release_node; + } + + ret = btrfs_delayed_inode_reserve_metadata(trans, root, delayed_node); + /* + * we must reserve enough space when we start a new transaction, + * so reserving metadata failure is impossible + */ + BUG_ON(ret); + + fill_stack_inode_item(trans, &delayed_node->inode_item, inode); + delayed_node->inode_dirty = 1; + delayed_node->count++; + atomic_inc(&root->fs_info->delayed_root->items); +release_node: + mutex_unlock(&delayed_node->mutex); + btrfs_release_delayed_node(delayed_node); + return ret; +} + +static void __btrfs_kill_delayed_node(struct btrfs_delayed_node *delayed_node) +{ + struct btrfs_root *root = delayed_node->root; + struct btrfs_delayed_item *curr_item, *prev_item; + + mutex_lock(&delayed_node->mutex); + curr_item = __btrfs_first_delayed_insertion_item(delayed_node); + while (curr_item) { + btrfs_delayed_item_release_metadata(root, curr_item); + prev_item = curr_item; + curr_item = __btrfs_next_delayed_item(prev_item); + btrfs_release_delayed_item(prev_item); + } + + curr_item = __btrfs_first_delayed_deletion_item(delayed_node); + while (curr_item) { + btrfs_delayed_item_release_metadata(root, curr_item); + prev_item = curr_item; + curr_item = __btrfs_next_delayed_item(prev_item); + btrfs_release_delayed_item(prev_item); + } + + if (delayed_node->inode_dirty) { + btrfs_delayed_inode_release_metadata(root, delayed_node); + btrfs_release_delayed_inode(delayed_node); + } + mutex_unlock(&delayed_node->mutex); +} + +void btrfs_kill_delayed_inode_items(struct inode *inode) +{ + struct btrfs_delayed_node *delayed_node; + + delayed_node = btrfs_get_delayed_node(inode); + if (!delayed_node) + return; + + __btrfs_kill_delayed_node(delayed_node); + btrfs_release_delayed_node(delayed_node); +} + +void btrfs_kill_all_delayed_nodes(struct btrfs_root *root) +{ + u64 inode_id = 0; + struct btrfs_delayed_node *delayed_nodes[8]; + int i, n; + + while (1) { + spin_lock(&root->inode_lock); + n = radix_tree_gang_lookup(&root->delayed_nodes_tree, + (void **)delayed_nodes, inode_id, + ARRAY_SIZE(delayed_nodes)); + if (!n) { + spin_unlock(&root->inode_lock); + break; + } + + inode_id = delayed_nodes[n - 1]->inode_id + 1; + + for (i = 0; i < n; i++) + atomic_inc(&delayed_nodes[i]->refs); + spin_unlock(&root->inode_lock); + + for (i = 0; i < n; i++) { + __btrfs_kill_delayed_node(delayed_nodes[i]); + btrfs_release_delayed_node(delayed_nodes[i]); + } + } +} diff --git a/fs/btrfs/delayed-inode.h b/fs/btrfs/delayed-inode.h new file mode 100644 index 000000000000..eb7d240aa648 --- /dev/null +++ b/fs/btrfs/delayed-inode.h @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2011 Fujitsu. All rights reserved. + * Written by Miao Xie + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License v2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + */ + +#ifndef __DELAYED_TREE_OPERATION_H +#define __DELAYED_TREE_OPERATION_H + +#include +#include +#include +#include +#include +#include + +#include "ctree.h" + +/* types of the delayed item */ +#define BTRFS_DELAYED_INSERTION_ITEM 1 +#define BTRFS_DELAYED_DELETION_ITEM 2 + +struct btrfs_delayed_root { + spinlock_t lock; + struct list_head node_list; + /* + * Used for delayed nodes which is waiting to be dealt with by the + * worker. If the delayed node is inserted into the work queue, we + * drop it from this list. + */ + struct list_head prepare_list; + atomic_t items; /* for delayed items */ + int nodes; /* for delayed nodes */ + wait_queue_head_t wait; +}; + +struct btrfs_delayed_node { + u64 inode_id; + u64 bytes_reserved; + struct btrfs_root *root; + /* Used to add the node into the delayed root's node list. */ + struct list_head n_list; + /* + * Used to add the node into the prepare list, the nodes in this list + * is waiting to be dealt with by the async worker. + */ + struct list_head p_list; + struct rb_root ins_root; + struct rb_root del_root; + struct mutex mutex; + struct btrfs_inode_item inode_item; + atomic_t refs; + u64 index_cnt; + bool in_list; + bool inode_dirty; + int count; +}; + +struct btrfs_delayed_item { + struct rb_node rb_node; + struct btrfs_key key; + struct list_head tree_list; /* used for batch insert/delete items */ + struct list_head readdir_list; /* used for readdir items */ + u64 bytes_reserved; + struct btrfs_block_rsv *block_rsv; + struct btrfs_delayed_node *delayed_node; + atomic_t refs; + int ins_or_del; + u32 data_len; + char data[0]; +}; + +static inline void btrfs_init_delayed_root( + struct btrfs_delayed_root *delayed_root) +{ + atomic_set(&delayed_root->items, 0); + delayed_root->nodes = 0; + spin_lock_init(&delayed_root->lock); + init_waitqueue_head(&delayed_root->wait); + INIT_LIST_HEAD(&delayed_root->node_list); + INIT_LIST_HEAD(&delayed_root->prepare_list); +} + +int btrfs_insert_delayed_dir_index(struct btrfs_trans_handle *trans, + struct btrfs_root *root, const char *name, + int name_len, struct inode *dir, + struct btrfs_disk_key *disk_key, u8 type, + u64 index); + +int btrfs_delete_delayed_dir_index(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct inode *dir, + u64 index); + +int btrfs_inode_delayed_dir_index_count(struct inode *inode); + +int btrfs_run_delayed_items(struct btrfs_trans_handle *trans, + struct btrfs_root *root); + +void btrfs_balance_delayed_items(struct btrfs_root *root); + +int btrfs_commit_inode_delayed_items(struct btrfs_trans_handle *trans, + struct inode *inode); +/* Used for evicting the inode. */ +void btrfs_remove_delayed_node(struct inode *inode); +void btrfs_kill_delayed_inode_items(struct inode *inode); + + +int btrfs_delayed_update_inode(struct btrfs_trans_handle *trans, + struct btrfs_root *root, struct inode *inode); + +/* Used for drop dead root */ +void btrfs_kill_all_delayed_nodes(struct btrfs_root *root); + +/* Used for readdir() */ +void btrfs_get_delayed_items(struct inode *inode, struct list_head *ins_list, + struct list_head *del_list); +void btrfs_put_delayed_items(struct list_head *ins_list, + struct list_head *del_list); +int btrfs_should_delete_dir_index(struct list_head *del_list, + u64 index); +int btrfs_readdir_delayed_dir_index(struct file *filp, void *dirent, + filldir_t filldir, + struct list_head *ins_list); + +/* for init */ +int __init btrfs_delayed_inode_init(void); +void btrfs_delayed_inode_exit(void); +#endif diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c index c62f02f6ae69..f53fb3847c96 100644 --- a/fs/btrfs/dir-item.c +++ b/fs/btrfs/dir-item.c @@ -124,8 +124,9 @@ int btrfs_insert_xattr_item(struct btrfs_trans_handle *trans, * to use for the second index (if one is created). */ int btrfs_insert_dir_item(struct btrfs_trans_handle *trans, struct btrfs_root - *root, const char *name, int name_len, u64 dir, - struct btrfs_key *location, u8 type, u64 index) + *root, const char *name, int name_len, + struct inode *dir, struct btrfs_key *location, + u8 type, u64 index) { int ret = 0; int ret2 = 0; @@ -137,13 +138,17 @@ int btrfs_insert_dir_item(struct btrfs_trans_handle *trans, struct btrfs_root struct btrfs_disk_key disk_key; u32 data_size; - key.objectid = dir; + key.objectid = dir->i_ino; btrfs_set_key_type(&key, BTRFS_DIR_ITEM_KEY); key.offset = btrfs_name_hash(name, name_len); path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; path->leave_spinning = 1; + btrfs_cpu_key_to_disk(&disk_key, location); + data_size = sizeof(*dir_item) + name_len; dir_item = insert_with_overflow(trans, root, path, &key, data_size, name, name_len); @@ -155,7 +160,6 @@ int btrfs_insert_dir_item(struct btrfs_trans_handle *trans, struct btrfs_root } leaf = path->nodes[0]; - btrfs_cpu_key_to_disk(&disk_key, location); btrfs_set_dir_item_key(leaf, dir_item, &disk_key); btrfs_set_dir_type(leaf, dir_item, type); btrfs_set_dir_data_len(leaf, dir_item, 0); @@ -174,27 +178,9 @@ second_insert: } btrfs_release_path(root, path); - btrfs_set_key_type(&key, BTRFS_DIR_INDEX_KEY); - key.offset = index; - dir_item = insert_with_overflow(trans, root, path, &key, data_size, - name, name_len); - if (IS_ERR(dir_item)) { - ret2 = PTR_ERR(dir_item); - goto out_free; - } - leaf = path->nodes[0]; - btrfs_cpu_key_to_disk(&disk_key, location); - btrfs_set_dir_item_key(leaf, dir_item, &disk_key); - btrfs_set_dir_type(leaf, dir_item, type); - btrfs_set_dir_data_len(leaf, dir_item, 0); - btrfs_set_dir_name_len(leaf, dir_item, name_len); - btrfs_set_dir_transid(leaf, dir_item, trans->transid); - name_ptr = (unsigned long)(dir_item + 1); - write_extent_buffer(leaf, name, name_ptr, name_len); - btrfs_mark_buffer_dirty(leaf); - + ret2 = btrfs_insert_delayed_dir_index(trans, root, name, name_len, dir, + &disk_key, type, index); out_free: - btrfs_free_path(path); if (ret) return ret; diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 228cf36ece83..22c3c9586049 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1058,6 +1058,7 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize, root->name = NULL; root->in_sysfs = 0; root->inode_tree = RB_ROOT; + INIT_RADIX_TREE(&root->delayed_nodes_tree, GFP_ATOMIC); root->block_rsv = NULL; root->orphan_block_rsv = NULL; @@ -1693,6 +1694,13 @@ struct btrfs_root *open_ctree(struct super_block *sb, INIT_LIST_HEAD(&fs_info->ordered_extents); spin_lock_init(&fs_info->ordered_extent_lock); + fs_info->delayed_root = kmalloc(sizeof(struct btrfs_delayed_root), + GFP_NOFS); + if (!fs_info->delayed_root) { + err = -ENOMEM; + goto fail_iput; + } + btrfs_init_delayed_root(fs_info->delayed_root); sb->s_blocksize = 4096; sb->s_blocksize_bits = blksize_bits(4096); @@ -1760,7 +1768,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, bh = btrfs_read_dev_super(fs_devices->latest_bdev); if (!bh) { err = -EINVAL; - goto fail_iput; + goto fail_alloc; } memcpy(&fs_info->super_copy, bh->b_data, sizeof(fs_info->super_copy)); @@ -1772,7 +1780,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, disk_super = &fs_info->super_copy; if (!btrfs_super_root(disk_super)) - goto fail_iput; + goto fail_alloc; /* check FS state, whether FS is broken. */ fs_info->fs_state |= btrfs_super_flags(disk_super); @@ -1788,7 +1796,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, ret = btrfs_parse_options(tree_root, options); if (ret) { err = ret; - goto fail_iput; + goto fail_alloc; } features = btrfs_super_incompat_flags(disk_super) & @@ -1798,7 +1806,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, "unsupported optional features (%Lx).\n", (unsigned long long)features); err = -EINVAL; - goto fail_iput; + goto fail_alloc; } features = btrfs_super_incompat_flags(disk_super); @@ -1814,7 +1822,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, "unsupported option features (%Lx).\n", (unsigned long long)features); err = -EINVAL; - goto fail_iput; + goto fail_alloc; } btrfs_init_workers(&fs_info->generic_worker, @@ -1861,6 +1869,9 @@ struct btrfs_root *open_ctree(struct super_block *sb, &fs_info->generic_worker); btrfs_init_workers(&fs_info->endio_freespace_worker, "freespace-write", 1, &fs_info->generic_worker); + btrfs_init_workers(&fs_info->delayed_workers, "delayed-meta", + fs_info->thread_pool_size, + &fs_info->generic_worker); /* * endios are largely parallel and should have a very @@ -1882,6 +1893,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, btrfs_start_workers(&fs_info->endio_meta_write_workers, 1); btrfs_start_workers(&fs_info->endio_write_workers, 1); btrfs_start_workers(&fs_info->endio_freespace_worker, 1); + btrfs_start_workers(&fs_info->delayed_workers, 1); fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super); fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages, @@ -2138,6 +2150,9 @@ fail_sb_buffer: btrfs_stop_workers(&fs_info->endio_write_workers); btrfs_stop_workers(&fs_info->endio_freespace_worker); btrfs_stop_workers(&fs_info->submit_workers); + btrfs_stop_workers(&fs_info->delayed_workers); +fail_alloc: + kfree(fs_info->delayed_root); fail_iput: invalidate_inode_pages2(fs_info->btree_inode->i_mapping); iput(fs_info->btree_inode); @@ -2578,6 +2593,7 @@ int close_ctree(struct btrfs_root *root) del_fs_roots(fs_info); iput(fs_info->btree_inode); + kfree(fs_info->delayed_root); btrfs_stop_workers(&fs_info->generic_worker); btrfs_stop_workers(&fs_info->fixup_workers); @@ -2589,6 +2605,7 @@ int close_ctree(struct btrfs_root *root) btrfs_stop_workers(&fs_info->endio_write_workers); btrfs_stop_workers(&fs_info->endio_freespace_worker); btrfs_stop_workers(&fs_info->submit_workers); + btrfs_stop_workers(&fs_info->delayed_workers); btrfs_close_devices(fs_info->fs_devices); btrfs_mapping_tree_free(&fs_info->mapping_tree); @@ -2662,6 +2679,29 @@ void btrfs_btree_balance_dirty(struct btrfs_root *root, unsigned long nr) u64 num_dirty; unsigned long thresh = 32 * 1024 * 1024; + if (current->flags & PF_MEMALLOC) + return; + + btrfs_balance_delayed_items(root); + + num_dirty = root->fs_info->dirty_metadata_bytes; + + if (num_dirty > thresh) { + balance_dirty_pages_ratelimited_nr( + root->fs_info->btree_inode->i_mapping, 1); + } + return; +} + +void __btrfs_btree_balance_dirty(struct btrfs_root *root, unsigned long nr) +{ + /* + * looks as though older kernels can get into trouble with + * this code, they end up stuck in balance_dirty_pages forever + */ + u64 num_dirty; + unsigned long thresh = 32 * 1024 * 1024; + if (current->flags & PF_MEMALLOC) return; diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h index 07b20dc2fd95..aca35af37dbc 100644 --- a/fs/btrfs/disk-io.h +++ b/fs/btrfs/disk-io.h @@ -71,6 +71,7 @@ int btrfs_insert_dev_radix(struct btrfs_root *root, u64 block_start, u64 num_blocks); void btrfs_btree_balance_dirty(struct btrfs_root *root, unsigned long nr); +void __btrfs_btree_balance_dirty(struct btrfs_root *root, unsigned long nr); int btrfs_free_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root); void btrfs_mark_buffer_dirty(struct extent_buffer *buf); void btrfs_mark_buffer_dirty_nonblocking(struct extent_buffer *buf); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 9ee6bd55e16c..7b0433866f36 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3973,12 +3973,6 @@ static void release_global_block_rsv(struct btrfs_fs_info *fs_info) WARN_ON(fs_info->chunk_block_rsv.reserved > 0); } -static u64 calc_trans_metadata_size(struct btrfs_root *root, int num_items) -{ - return (root->leafsize + root->nodesize * (BTRFS_MAX_LEVEL - 1)) * - 3 * num_items; -} - int btrfs_trans_reserve_metadata(struct btrfs_trans_handle *trans, struct btrfs_root *root, int num_items) @@ -3989,7 +3983,7 @@ int btrfs_trans_reserve_metadata(struct btrfs_trans_handle *trans, if (num_items == 0 || root->fs_info->chunk_root == root) return 0; - num_bytes = calc_trans_metadata_size(root, num_items); + num_bytes = btrfs_calc_trans_metadata_size(root, num_items); ret = btrfs_block_rsv_add(trans, root, &root->fs_info->trans_block_rsv, num_bytes); if (!ret) { @@ -4028,14 +4022,14 @@ int btrfs_orphan_reserve_metadata(struct btrfs_trans_handle *trans, * If all of the metadata space is used, we can commit * transaction and use space it freed. */ - u64 num_bytes = calc_trans_metadata_size(root, 4); + u64 num_bytes = btrfs_calc_trans_metadata_size(root, 4); return block_rsv_migrate_bytes(src_rsv, dst_rsv, num_bytes); } void btrfs_orphan_release_metadata(struct inode *inode) { struct btrfs_root *root = BTRFS_I(inode)->root; - u64 num_bytes = calc_trans_metadata_size(root, 4); + u64 num_bytes = btrfs_calc_trans_metadata_size(root, 4); btrfs_block_rsv_release(root, root->orphan_block_rsv, num_bytes); } @@ -4049,7 +4043,7 @@ int btrfs_snap_reserve_metadata(struct btrfs_trans_handle *trans, * two for root back/forward refs, two for directory entries * and one for root of the snapshot. */ - u64 num_bytes = calc_trans_metadata_size(root, 5); + u64 num_bytes = btrfs_calc_trans_metadata_size(root, 5); dst_rsv->space_info = src_rsv->space_info; return block_rsv_migrate_bytes(src_rsv, dst_rsv, num_bytes); } @@ -4078,7 +4072,7 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) if (nr_extents > reserved_extents) { nr_extents -= reserved_extents; - to_reserve = calc_trans_metadata_size(root, nr_extents); + to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents); } else { nr_extents = 0; to_reserve = 0; @@ -4132,7 +4126,7 @@ void btrfs_delalloc_release_metadata(struct inode *inode, u64 num_bytes) to_free = calc_csum_metadata_size(inode, num_bytes); if (nr_extents > 0) - to_free += calc_trans_metadata_size(root, nr_extents); + to_free += btrfs_calc_trans_metadata_size(root, nr_extents); btrfs_block_rsv_release(root, &root->fs_info->delalloc_block_rsv, to_free); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 7cd8ab0ef04d..3470f67c6258 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2647,11 +2647,26 @@ noinline int btrfs_update_inode(struct btrfs_trans_handle *trans, struct extent_buffer *leaf; int ret; + /* + * If root is tree root, it means this inode is used to + * store free space information. And these inodes are updated + * when committing the transaction, so they needn't delaye to + * be updated, or deadlock will occured. + */ + if (likely(root != root->fs_info->tree_root)) { + ret = btrfs_delayed_update_inode(trans, root, inode); + if (!ret) + btrfs_set_inode_last_trans(trans, inode); + return ret; + } + path = btrfs_alloc_path(); - BUG_ON(!path); + if (!path) + return -ENOMEM; + path->leave_spinning = 1; - ret = btrfs_lookup_inode(trans, root, path, - &BTRFS_I(inode)->location, 1); + ret = btrfs_lookup_inode(trans, root, path, &BTRFS_I(inode)->location, + 1); if (ret) { if (ret > 0) ret = -ENOENT; @@ -2661,7 +2676,7 @@ noinline int btrfs_update_inode(struct btrfs_trans_handle *trans, btrfs_unlock_up_safe(path, 1); leaf = path->nodes[0]; inode_item = btrfs_item_ptr(leaf, path->slots[0], - struct btrfs_inode_item); + struct btrfs_inode_item); fill_inode_item(trans, leaf, inode_item, inode); btrfs_mark_buffer_dirty(leaf); @@ -2672,7 +2687,6 @@ failed: return ret; } - /* * unlink helper that gets used here in inode.c and in the tree logging * recovery code. It remove a link in a directory with a given name, and @@ -2724,18 +2738,9 @@ static int __btrfs_unlink_inode(struct btrfs_trans_handle *trans, goto err; } - di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino, - index, name, name_len, -1); - if (IS_ERR(di)) { - ret = PTR_ERR(di); - goto err; - } - if (!di) { - ret = -ENOENT; + ret = btrfs_delete_delayed_dir_index(trans, root, dir, index); + if (ret) goto err; - } - ret = btrfs_delete_one_dir_name(trans, root, path, di); - btrfs_release_path(root, path); ret = btrfs_del_inode_ref_in_log(trans, root, name, name_len, inode, dir->i_ino); @@ -2924,6 +2929,14 @@ static struct btrfs_trans_handle *__unlink_start_trans(struct inode *dir, index = btrfs_inode_ref_index(path->nodes[0], ref); btrfs_release_path(root, path); + /* + * This is a commit root search, if we can lookup inode item and other + * relative items in the commit root, it means the transaction of + * dir/file creation has been committed, and the dir index item that we + * delay to insert has also been inserted into the commit root. So + * we needn't worry about the delayed insertion of the dir index item + * here. + */ di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino, index, dentry->d_name.name, dentry->d_name.len, 0); if (IS_ERR(di)) { @@ -3029,24 +3042,16 @@ int btrfs_unlink_subvol(struct btrfs_trans_handle *trans, btrfs_release_path(root, path); index = key.offset; } + btrfs_release_path(root, path); - di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino, - index, name, name_len, -1); - BUG_ON(!di || IS_ERR(di)); - - leaf = path->nodes[0]; - btrfs_dir_item_key_to_cpu(leaf, di, &key); - WARN_ON(key.type != BTRFS_ROOT_ITEM_KEY || key.objectid != objectid); - ret = btrfs_delete_one_dir_name(trans, root, path, di); + ret = btrfs_delete_delayed_dir_index(trans, root, dir, index); BUG_ON(ret); - btrfs_release_path(root, path); btrfs_i_size_write(dir, dir->i_size - name_len * 2); dir->i_mtime = dir->i_ctime = CURRENT_TIME; ret = btrfs_update_inode(trans, root, dir); BUG_ON(ret); - btrfs_free_path(path); return 0; } @@ -3306,6 +3311,15 @@ int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans, if (root->ref_cows || root == root->fs_info->tree_root) btrfs_drop_extent_cache(inode, new_size & (~mask), (u64)-1, 0); + /* + * This function is also used to drop the items in the log tree before + * we relog the inode, so if root != BTRFS_I(inode)->root, it means + * it is used to drop the loged items. So we shouldn't kill the delayed + * items. + */ + if (min_type == 0 && root == BTRFS_I(inode)->root) + btrfs_kill_delayed_inode_items(inode); + path = btrfs_alloc_path(); BUG_ON(!path); path->reada = -1; @@ -4208,7 +4222,7 @@ static struct dentry *btrfs_lookup(struct inode *dir, struct dentry *dentry, return d_splice_alias(inode, dentry); } -static unsigned char btrfs_filetype_table[] = { +unsigned char btrfs_filetype_table[] = { DT_UNKNOWN, DT_REG, DT_DIR, DT_CHR, DT_BLK, DT_FIFO, DT_SOCK, DT_LNK }; @@ -4222,6 +4236,8 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, struct btrfs_key key; struct btrfs_key found_key; struct btrfs_path *path; + struct list_head ins_list; + struct list_head del_list; int ret; struct extent_buffer *leaf; int slot; @@ -4234,6 +4250,7 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, char tmp_name[32]; char *name_ptr; int name_len; + int is_curr = 0; /* filp->f_pos points to the current index? */ /* FIXME, use a real flag for deciding about the key type */ if (root->fs_info->tree_root == root) @@ -4258,8 +4275,16 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, filp->f_pos = 2; } path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; path->reada = 2; + if (key_type == BTRFS_DIR_INDEX_KEY) { + INIT_LIST_HEAD(&ins_list); + INIT_LIST_HEAD(&del_list); + btrfs_get_delayed_items(inode, &ins_list, &del_list); + } + btrfs_set_key_type(&key, key_type); key.offset = filp->f_pos; key.objectid = inode->i_ino; @@ -4289,8 +4314,13 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, break; if (found_key.offset < filp->f_pos) goto next; + if (key_type == BTRFS_DIR_INDEX_KEY && + btrfs_should_delete_dir_index(&del_list, + found_key.offset)) + goto next; filp->f_pos = found_key.offset; + is_curr = 1; di = btrfs_item_ptr(leaf, slot, struct btrfs_dir_item); di_cur = 0; @@ -4345,6 +4375,15 @@ next: path->slots[0]++; } + if (key_type == BTRFS_DIR_INDEX_KEY) { + if (is_curr) + filp->f_pos++; + ret = btrfs_readdir_delayed_dir_index(filp, dirent, filldir, + &ins_list); + if (ret) + goto nopos; + } + /* Reached end of directory/root. Bump pos past the last item. */ if (key_type == BTRFS_DIR_INDEX_KEY) /* @@ -4357,6 +4396,8 @@ next: nopos: ret = 0; err: + if (key_type == BTRFS_DIR_INDEX_KEY) + btrfs_put_delayed_items(&ins_list, &del_list); btrfs_free_path(path); return ret; } @@ -4434,6 +4475,8 @@ void btrfs_dirty_inode(struct inode *inode) } } btrfs_end_transaction(trans, root); + if (BTRFS_I(inode)->delayed_node) + btrfs_balance_delayed_items(root); } /* @@ -4502,9 +4545,12 @@ int btrfs_set_inode_index(struct inode *dir, u64 *index) int ret = 0; if (BTRFS_I(dir)->index_cnt == (u64)-1) { - ret = btrfs_set_inode_index_count(dir); - if (ret) - return ret; + ret = btrfs_inode_delayed_dir_index_count(dir); + if (ret) { + ret = btrfs_set_inode_index_count(dir); + if (ret) + return ret; + } } *index = BTRFS_I(dir)->index_cnt; @@ -4671,7 +4717,7 @@ int btrfs_add_link(struct btrfs_trans_handle *trans, if (ret == 0) { ret = btrfs_insert_dir_item(trans, root, name, name_len, - parent_inode->i_ino, &key, + parent_inode, &key, btrfs_inode_type(inode), index); BUG_ON(ret); @@ -6784,6 +6830,8 @@ struct inode *btrfs_alloc_inode(struct super_block *sb) ei->dummy_inode = 0; ei->force_compress = BTRFS_COMPRESS_NONE; + ei->delayed_node = NULL; + inode = &ei->vfs_inode; extent_map_tree_init(&ei->extent_tree, GFP_NOFS); extent_io_tree_init(&ei->io_tree, &inode->i_data, GFP_NOFS); @@ -6874,6 +6922,7 @@ void btrfs_destroy_inode(struct inode *inode) inode_tree_del(inode); btrfs_drop_extent_cache(inode, 0, (u64)-1, 0); free: + btrfs_remove_delayed_node(inode); call_rcu(&inode->i_rcu, btrfs_i_callback); } diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 2616f7ed4799..df59401af742 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -422,7 +422,7 @@ static noinline int create_subvol(struct btrfs_root *root, BUG_ON(ret); ret = btrfs_insert_dir_item(trans, root, - name, namelen, dir->i_ino, &key, + name, namelen, dir, &key, BTRFS_FT_DIR, index); if (ret) goto fail; diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 0ac712efcdf2..cc5a2a8a5acb 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -40,6 +40,7 @@ #include #include #include "compat.h" +#include "delayed-inode.h" #include "ctree.h" #include "disk-io.h" #include "transaction.h" @@ -1206,10 +1207,14 @@ static int __init init_btrfs_fs(void) if (err) goto free_extent_io; - err = btrfs_interface_init(); + err = btrfs_delayed_inode_init(); if (err) goto free_extent_map; + err = btrfs_interface_init(); + if (err) + goto free_delayed_inode; + err = register_filesystem(&btrfs_fs_type); if (err) goto unregister_ioctl; @@ -1219,6 +1224,8 @@ static int __init init_btrfs_fs(void) unregister_ioctl: btrfs_interface_exit(); +free_delayed_inode: + btrfs_delayed_inode_exit(); free_extent_map: extent_map_exit(); free_extent_io: @@ -1235,6 +1242,7 @@ free_sysfs: static void __exit exit_btrfs_fs(void) { btrfs_destroy_cachep(); + btrfs_delayed_inode_exit(); extent_map_exit(); extent_io_exit(); btrfs_interface_exit(); diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index c571734d5e5a..b83ed5e64a32 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -487,19 +487,40 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans, int btrfs_end_transaction(struct btrfs_trans_handle *trans, struct btrfs_root *root) { - return __btrfs_end_transaction(trans, root, 0, 1); + int ret; + + ret = __btrfs_end_transaction(trans, root, 0, 1); + if (ret) + return ret; + return 0; } int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans, struct btrfs_root *root) { - return __btrfs_end_transaction(trans, root, 1, 1); + int ret; + + ret = __btrfs_end_transaction(trans, root, 1, 1); + if (ret) + return ret; + return 0; } int btrfs_end_transaction_nolock(struct btrfs_trans_handle *trans, struct btrfs_root *root) { - return __btrfs_end_transaction(trans, root, 0, 0); + int ret; + + ret = __btrfs_end_transaction(trans, root, 0, 0); + if (ret) + return ret; + return 0; +} + +int btrfs_end_transaction_dmeta(struct btrfs_trans_handle *trans, + struct btrfs_root *root) +{ + return __btrfs_end_transaction(trans, root, 1, 1); } /* @@ -967,7 +988,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, BUG_ON(ret); ret = btrfs_insert_dir_item(trans, parent_root, dentry->d_name.name, dentry->d_name.len, - parent_inode->i_ino, &key, + parent_inode, &key, BTRFS_FT_DIR, index); BUG_ON(ret); @@ -1037,6 +1058,14 @@ static noinline int create_pending_snapshots(struct btrfs_trans_handle *trans, int ret; list_for_each_entry(pending, head, list) { + /* + * We must deal with the delayed items before creating + * snapshots, or we will create a snapthot with inconsistent + * information. + */ + ret = btrfs_run_delayed_items(trans, fs_info->fs_root); + BUG_ON(ret); + ret = create_pending_snapshot(trans, fs_info, pending); BUG_ON(ret); } @@ -1290,6 +1319,9 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, BUG_ON(ret); } + ret = btrfs_run_delayed_items(trans, root); + BUG_ON(ret); + /* * rename don't use btrfs_join_transaction, so, once we * set the transaction to blocked above, we aren't going @@ -1316,6 +1348,9 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, ret = create_pending_snapshots(trans, root->fs_info); BUG_ON(ret); + ret = btrfs_run_delayed_items(trans, root); + BUG_ON(ret); + ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1); BUG_ON(ret); @@ -1432,6 +1467,8 @@ int btrfs_clean_old_snapshots(struct btrfs_root *root) root = list_entry(list.next, struct btrfs_root, root_list); list_del(&root->root_list); + btrfs_kill_all_delayed_nodes(root); + if (btrfs_header_backref_rev(root->node) < BTRFS_MIXED_BACKREF_REV) btrfs_drop_snapshot(root, NULL, 0); diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index e441acc6c584..cb928c6c42e6 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -115,6 +115,8 @@ int btrfs_commit_transaction_async(struct btrfs_trans_handle *trans, int wait_for_unblock); int btrfs_end_transaction_throttle(struct btrfs_trans_handle *trans, struct btrfs_root *root); +int btrfs_end_transaction_dmeta(struct btrfs_trans_handle *trans, + struct btrfs_root *root); int btrfs_should_end_transaction(struct btrfs_trans_handle *trans, struct btrfs_root *root); void btrfs_throttle(struct btrfs_root *root); diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index f997ec0c1ba4..ae0b72856bfb 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -2773,6 +2773,13 @@ static int btrfs_log_inode(struct btrfs_trans_handle *trans, max_key.type = (u8)-1; max_key.offset = (u64)-1; + ret = btrfs_commit_inode_delayed_items(trans, inode); + if (ret) { + btrfs_free_path(path); + btrfs_free_path(dst_path); + return ret; + } + mutex_lock(&BTRFS_I(inode)->log_mutex); /* -- cgit v1.2.3 From 0d0ca30f180906224be6279788f2b202cfd959d8 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Sun, 22 May 2011 07:11:22 -0400 Subject: Btrfs: update the delayed inode code to use the btrfs_ino helper. Signed-off-by: Chris Mason --- fs/btrfs/delayed-inode.c | 11 ++++++----- fs/btrfs/dir-item.c | 2 +- 2 files changed, 7 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 95485318f001..c25405f69360 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -88,6 +88,7 @@ static struct btrfs_delayed_node *btrfs_get_or_create_delayed_node( struct btrfs_delayed_node *node; struct btrfs_inode *btrfs_inode = BTRFS_I(inode); struct btrfs_root *root = btrfs_inode->root; + u64 ino = btrfs_ino(inode); int ret; again: @@ -98,7 +99,7 @@ again: } spin_lock(&root->inode_lock); - node = radix_tree_lookup(&root->delayed_nodes_tree, inode->i_ino); + node = radix_tree_lookup(&root->delayed_nodes_tree, ino); if (node) { if (btrfs_inode->delayed_node) { spin_unlock(&root->inode_lock); @@ -115,7 +116,7 @@ again: node = kmem_cache_alloc(delayed_node_cache, GFP_NOFS); if (!node) return ERR_PTR(-ENOMEM); - btrfs_init_delayed_node(node, root, inode->i_ino); + btrfs_init_delayed_node(node, root, ino); atomic_inc(&node->refs); /* cached in the btrfs inode */ atomic_inc(&node->refs); /* can be accessed */ @@ -127,7 +128,7 @@ again: } spin_lock(&root->inode_lock); - ret = radix_tree_insert(&root->delayed_nodes_tree, inode->i_ino, node); + ret = radix_tree_insert(&root->delayed_nodes_tree, ino, node); if (ret == -EEXIST) { kmem_cache_free(delayed_node_cache, node); spin_unlock(&root->inode_lock); @@ -1274,7 +1275,7 @@ int btrfs_insert_delayed_dir_index(struct btrfs_trans_handle *trans, */ BUG_ON(ret); - delayed_item->key.objectid = dir->i_ino; + delayed_item->key.objectid = btrfs_ino(dir); btrfs_set_key_type(&delayed_item->key, BTRFS_DIR_INDEX_KEY); delayed_item->key.offset = index; @@ -1337,7 +1338,7 @@ int btrfs_delete_delayed_dir_index(struct btrfs_trans_handle *trans, if (IS_ERR(node)) return PTR_ERR(node); - item_key.objectid = dir->i_ino; + item_key.objectid = btrfs_ino(dir); btrfs_set_key_type(&item_key, BTRFS_DIR_INDEX_KEY); item_key.offset = index; diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c index f53fb3847c96..e757202a014e 100644 --- a/fs/btrfs/dir-item.c +++ b/fs/btrfs/dir-item.c @@ -138,7 +138,7 @@ int btrfs_insert_dir_item(struct btrfs_trans_handle *trans, struct btrfs_root struct btrfs_disk_key disk_key; u32 data_size; - key.objectid = dir->i_ino; + key.objectid = btrfs_ino(dir); btrfs_set_key_type(&key, BTRFS_DIR_ITEM_KEY); key.offset = btrfs_name_hash(name, name_len); -- cgit v1.2.3 From 2c8f981d93f830c167c811f046b5107cc24b6e1b Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 19 May 2011 16:22:52 -0400 Subject: cifs: consolidate SendReceive response checks Further consolidate the SendReceive code by moving the checks run over the packet into a separate function that all the SendReceive variants can call. We can also eliminate the check for a receive_len that's too big or too small. cifs_demultiplex_thread already checks that and disconnects the socket if that occurs, while setting the midStatus to MALFORMED. It'll never call this code if that's the case. Finally do a little cleanup. Use "goto out" on errors so that the flow of code in the normal case is more evident. Also switch the logErr variable in map_smb_to_linux_error to a bool. Reviewed-by: Pavel Shilovsky Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 4 +- fs/cifs/netmisc.c | 2 +- fs/cifs/transport.c | 157 ++++++++++++++-------------------------------------- 3 files changed, 45 insertions(+), 118 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 6e69e06a30b3..7aa131112884 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -76,6 +76,8 @@ extern int SendReceive(const unsigned int /* xid */ , struct cifsSesInfo *, int * /* bytes returned */ , const int long_op); extern int SendReceiveNoRsp(const unsigned int xid, struct cifsSesInfo *ses, struct smb_hdr *in_buf, int flags); +extern int cifs_check_receive(struct mid_q_entry *mid, + struct TCP_Server_Info *server, bool log_error); extern int SendReceive2(const unsigned int /* xid */ , struct cifsSesInfo *, struct kvec *, int /* nvec to send */, int * /* type of buf returned */ , const int flags); @@ -99,7 +101,7 @@ extern int cifs_convert_address(struct sockaddr *dst, const char *src, int len); extern int cifs_set_port(struct sockaddr *addr, const unsigned short int port); extern int cifs_fill_sockaddr(struct sockaddr *dst, const char *src, int len, const unsigned short int port); -extern int map_smb_to_linux_error(struct smb_hdr *smb, int logErr); +extern int map_smb_to_linux_error(struct smb_hdr *smb, bool logErr); extern void header_assemble(struct smb_hdr *, char /* command */ , const struct cifsTconInfo *, int /* length of fixed section (word count) in two byte units */); diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c index 79b71c2c7c9d..73e47e84b61a 100644 --- a/fs/cifs/netmisc.c +++ b/fs/cifs/netmisc.c @@ -836,7 +836,7 @@ ntstatus_to_dos(__u32 ntstatus, __u8 *eclass, __u16 *ecode) } int -map_smb_to_linux_error(struct smb_hdr *smb, int logErr) +map_smb_to_linux_error(struct smb_hdr *smb, bool logErr) { unsigned int i; int rc = -EIO; /* if transport error smb error may not be set */ diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index f2513fb8c391..43633a79942a 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -501,6 +501,25 @@ send_nt_cancel(struct TCP_Server_Info *server, struct smb_hdr *in_buf, return rc; } +int +cifs_check_receive(struct mid_q_entry *mid, struct TCP_Server_Info *server, + bool log_error) +{ + dump_smb(mid->resp_buf, + min_t(u32, 92, be32_to_cpu(mid->resp_buf->smb_buf_length))); + + /* convert the length into a more usable form */ + if (server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) { + /* FIXME: add code to kill session */ + if (cifs_verify_signature(mid->resp_buf, server, + mid->sequence_number + 1) != 0) + cERROR(1, "Unexpected SMB signature"); + } + + /* BB special case reconnect tid and uid here? */ + return map_smb_to_linux_error(mid->resp_buf, log_error); +} + int SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, struct kvec *iov, int n_vec, int *pRespBufType /* ret */, @@ -508,7 +527,6 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, { int rc = 0; int long_op; - unsigned int receive_len; struct mid_q_entry *midQ; struct smb_hdr *in_buf = iov[0].iov_base; @@ -605,54 +623,24 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, return rc; } - receive_len = be32_to_cpu(midQ->resp_buf->smb_buf_length); - - if (receive_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) { - cERROR(1, "Frame too large received. Length: %d Xid: %d", - receive_len, xid); + if (!midQ->resp_buf || midQ->midState != MID_RESPONSE_RECEIVED) { rc = -EIO; + cFYI(1, "Bad MID state?"); goto out; } - /* rcvd frame is ok */ - - if (midQ->resp_buf && - (midQ->midState == MID_RESPONSE_RECEIVED)) { - - iov[0].iov_base = (char *)midQ->resp_buf; - if (midQ->largeBuf) - *pRespBufType = CIFS_LARGE_BUFFER; - else - *pRespBufType = CIFS_SMALL_BUFFER; - iov[0].iov_len = receive_len + 4; - - dump_smb(midQ->resp_buf, 80); - /* convert the length into a more usable form */ - if ((receive_len > 24) && - (ses->server->secMode & (SECMODE_SIGN_REQUIRED | - SECMODE_SIGN_ENABLED))) { - rc = cifs_verify_signature(midQ->resp_buf, - ses->server, - midQ->sequence_number+1); - if (rc) { - cERROR(1, "Unexpected SMB signature"); - /* BB FIXME add code to kill session */ - } - } - - /* BB special case reconnect tid and uid here? */ - rc = map_smb_to_linux_error(midQ->resp_buf, - flags & CIFS_LOG_ERROR); + iov[0].iov_base = (char *)midQ->resp_buf; + iov[0].iov_len = be32_to_cpu(midQ->resp_buf->smb_buf_length) + 4; + if (midQ->largeBuf) + *pRespBufType = CIFS_LARGE_BUFFER; + else + *pRespBufType = CIFS_SMALL_BUFFER; - if ((flags & CIFS_NO_RESP) == 0) - midQ->resp_buf = NULL; /* mark it so buf will - not be freed by - delete_mid */ - } else { - rc = -EIO; - cFYI(1, "Bad MID state?"); - } + rc = cifs_check_receive(midQ, ses->server, flags & CIFS_LOG_ERROR); + /* mark it so buf will not be freed by delete_mid */ + if ((flags & CIFS_NO_RESP) == 0) + midQ->resp_buf = NULL; out: delete_mid(midQ); atomic_dec(&ses->server->inFlight); @@ -667,7 +655,6 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses, int *pbytes_returned, const int long_op) { int rc = 0; - unsigned int receive_len; struct mid_q_entry *midQ; if (ses == NULL) { @@ -757,47 +744,16 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses, return rc; } - receive_len = be32_to_cpu(midQ->resp_buf->smb_buf_length); - - if (receive_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) { - cERROR(1, "Frame too large received. Length: %d Xid: %d", - receive_len, xid); - rc = -EIO; - goto out; - } - - /* rcvd frame is ok */ - - if (midQ->resp_buf && out_buf - && (midQ->midState == MID_RESPONSE_RECEIVED)) { - out_buf->smb_buf_length = cpu_to_be32(receive_len); - memcpy((char *)out_buf + 4, - (char *)midQ->resp_buf + 4, - receive_len); - - dump_smb(out_buf, 92); - /* convert the length into a more usable form */ - if ((receive_len > 24) && - (ses->server->secMode & (SECMODE_SIGN_REQUIRED | - SECMODE_SIGN_ENABLED))) { - rc = cifs_verify_signature(out_buf, - ses->server, - midQ->sequence_number+1); - if (rc) { - cERROR(1, "Unexpected SMB signature"); - /* BB FIXME add code to kill session */ - } - } - - *pbytes_returned = be32_to_cpu(out_buf->smb_buf_length); - - /* BB special case reconnect tid and uid here? */ - rc = map_smb_to_linux_error(out_buf, 0 /* no log */ ); - } else { + if (!midQ->resp_buf || !out_buf || + midQ->midState != MID_RESPONSE_RECEIVED) { rc = -EIO; cERROR(1, "Bad MID state?"); + goto out; } + *pbytes_returned = be32_to_cpu(midQ->resp_buf->smb_buf_length); + memcpy(out_buf, midQ->resp_buf, *pbytes_returned + 4); + rc = cifs_check_receive(midQ, ses->server, 0); out: delete_mid(midQ); atomic_dec(&ses->server->inFlight); @@ -838,7 +794,6 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon, { int rc = 0; int rstart = 0; - unsigned int receive_len; struct mid_q_entry *midQ; struct cifsSesInfo *ses; @@ -961,46 +916,16 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon, if (rc != 0) return rc; - receive_len = be32_to_cpu(midQ->resp_buf->smb_buf_length); - if (receive_len > CIFSMaxBufSize + MAX_CIFS_HDR_SIZE) { - cERROR(1, "Frame too large received. Length: %d Xid: %d", - receive_len, xid); - rc = -EIO; - goto out; - } - /* rcvd frame is ok */ - - if ((out_buf == NULL) || (midQ->midState != MID_RESPONSE_RECEIVED)) { + if (out_buf == NULL || midQ->midState != MID_RESPONSE_RECEIVED) { rc = -EIO; cERROR(1, "Bad MID state?"); goto out; } - out_buf->smb_buf_length = cpu_to_be32(receive_len); - memcpy((char *)out_buf + 4, - (char *)midQ->resp_buf + 4, - receive_len); - - dump_smb(out_buf, 92); - /* convert the length into a more usable form */ - if ((receive_len > 24) && - (ses->server->secMode & (SECMODE_SIGN_REQUIRED | - SECMODE_SIGN_ENABLED))) { - rc = cifs_verify_signature(out_buf, - ses->server, - midQ->sequence_number+1); - if (rc) { - cERROR(1, "Unexpected SMB signature"); - /* BB FIXME add code to kill session */ - } - } - - *pbytes_returned = be32_to_cpu(out_buf->smb_buf_length); - - /* BB special case reconnect tid and uid here? */ - rc = map_smb_to_linux_error(out_buf, 0 /* no log */ ); - + *pbytes_returned = be32_to_cpu(midQ->resp_buf->smb_buf_length); + memcpy(out_buf, midQ->resp_buf, *pbytes_returned + 4); + rc = cifs_check_receive(midQ, ses->server, 0); out: delete_mid(midQ); if (rstart && rc == -EACCES) -- cgit v1.2.3 From fcc31cb6f1ae6c4e64a463b124d3c2e9cbd7dd70 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 19 May 2011 16:22:53 -0400 Subject: cifs: make cifs_send_async take a kvec array We'll need this for async writes, so convert the call to take a kvec array. CIFSSMBEcho is changed to put a kvec on the stack and pass in the SMB buffer using that. Reviewed-by: Pavel Shilovsky Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 4 ++-- fs/cifs/cifssmb.c | 6 ++++-- fs/cifs/transport.c | 13 +++++++------ 3 files changed, 13 insertions(+), 10 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 7aa131112884..f00aa74c2607 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -67,8 +67,8 @@ extern char *cifs_compose_mount_options(const char *sb_mountdata, extern struct mid_q_entry *AllocMidQEntry(const struct smb_hdr *smb_buffer, struct TCP_Server_Info *server); extern void DeleteMidQEntry(struct mid_q_entry *midEntry); -extern int cifs_call_async(struct TCP_Server_Info *server, - struct smb_hdr *in_buf, mid_callback_t *callback, +extern int cifs_call_async(struct TCP_Server_Info *server, struct kvec *iov, + unsigned int nvec, mid_callback_t *callback, void *cbdata); extern int SendReceive(const unsigned int /* xid */ , struct cifsSesInfo *, struct smb_hdr * /* input */ , diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 83df937b814e..8791c74575d9 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -725,6 +725,7 @@ CIFSSMBEcho(struct TCP_Server_Info *server) { ECHO_REQ *smb; int rc = 0; + struct kvec iov; cFYI(1, "In echo request"); @@ -739,9 +740,10 @@ CIFSSMBEcho(struct TCP_Server_Info *server) put_bcc(1, &smb->hdr); smb->Data[0] = 'a'; inc_rfc1001_len(smb, 3); + iov.iov_base = smb; + iov.iov_len = be32_to_cpu(smb->hdr.smb_buf_length) + 4; - rc = cifs_call_async(server, (struct smb_hdr *)smb, - cifs_echo_callback, server); + rc = cifs_call_async(server, &iov, 1, cifs_echo_callback, server); if (rc) cFYI(1, "Echo request failed: %d", rc); diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 43633a79942a..67f59c7b5d79 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -342,11 +342,12 @@ wait_for_response(struct TCP_Server_Info *server, struct mid_q_entry *midQ) * the result. Caller is responsible for dealing with timeouts. */ int -cifs_call_async(struct TCP_Server_Info *server, struct smb_hdr *in_buf, - mid_callback_t *callback, void *cbdata) +cifs_call_async(struct TCP_Server_Info *server, struct kvec *iov, + unsigned int nvec, mid_callback_t *callback, void *cbdata) { int rc; struct mid_q_entry *mid; + struct smb_hdr *hdr = (struct smb_hdr *)iov[0].iov_base; rc = wait_for_free_request(server, CIFS_ASYNC_OP); if (rc) @@ -354,10 +355,10 @@ cifs_call_async(struct TCP_Server_Info *server, struct smb_hdr *in_buf, /* enable signing if server requires it */ if (server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) - in_buf->Flags2 |= SMBFLG2_SECURITY_SIGNATURE; + hdr->Flags2 |= SMBFLG2_SECURITY_SIGNATURE; mutex_lock(&server->srv_mutex); - mid = AllocMidQEntry(in_buf, server); + mid = AllocMidQEntry(hdr, server); if (mid == NULL) { mutex_unlock(&server->srv_mutex); return -ENOMEM; @@ -368,7 +369,7 @@ cifs_call_async(struct TCP_Server_Info *server, struct smb_hdr *in_buf, list_add_tail(&mid->qhead, &server->pending_mid_q); spin_unlock(&GlobalMid_Lock); - rc = cifs_sign_smb(in_buf, server, &mid->sequence_number); + rc = cifs_sign_smb2(iov, nvec, server, &mid->sequence_number); if (rc) { mutex_unlock(&server->srv_mutex); goto out_err; @@ -380,7 +381,7 @@ cifs_call_async(struct TCP_Server_Info *server, struct smb_hdr *in_buf, #ifdef CONFIG_CIFS_STATS2 atomic_inc(&server->inSend); #endif - rc = smb_send(server, in_buf, be32_to_cpu(in_buf->smb_buf_length)); + rc = smb_sendv(server, iov, nvec); #ifdef CONFIG_CIFS_STATS2 atomic_dec(&server->inSend); mid->when_sent = jiffies; -- cgit v1.2.3 From 59ffd84141472c45a1729a739e4730f974d26e63 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 19 May 2011 16:22:55 -0400 Subject: cifs: add ignore_pend flag to cifs_call_async The current code always ignores the max_pending limit. Have it instead only optionally ignore the pending limit. For CIFSSMBEcho, we need to ignore it to make sure they always can go out. For async reads, writes and potentially other calls, we need to respect it. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 2 +- fs/cifs/cifssmb.c | 2 +- fs/cifs/transport.c | 5 +++-- 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index f00aa74c2607..3738a322cbef 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -69,7 +69,7 @@ extern struct mid_q_entry *AllocMidQEntry(const struct smb_hdr *smb_buffer, extern void DeleteMidQEntry(struct mid_q_entry *midEntry); extern int cifs_call_async(struct TCP_Server_Info *server, struct kvec *iov, unsigned int nvec, mid_callback_t *callback, - void *cbdata); + void *cbdata, bool ignore_pend); extern int SendReceive(const unsigned int /* xid */ , struct cifsSesInfo *, struct smb_hdr * /* input */ , struct smb_hdr * /* out */ , diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 8791c74575d9..e0d24135b3c6 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -743,7 +743,7 @@ CIFSSMBEcho(struct TCP_Server_Info *server) iov.iov_base = smb; iov.iov_len = be32_to_cpu(smb->hdr.smb_buf_length) + 4; - rc = cifs_call_async(server, &iov, 1, cifs_echo_callback, server); + rc = cifs_call_async(server, &iov, 1, cifs_echo_callback, server, true); if (rc) cFYI(1, "Echo request failed: %d", rc); diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 67f59c7b5d79..16bcc0725cee 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -343,13 +343,14 @@ wait_for_response(struct TCP_Server_Info *server, struct mid_q_entry *midQ) */ int cifs_call_async(struct TCP_Server_Info *server, struct kvec *iov, - unsigned int nvec, mid_callback_t *callback, void *cbdata) + unsigned int nvec, mid_callback_t *callback, void *cbdata, + bool ignore_pend) { int rc; struct mid_q_entry *mid; struct smb_hdr *hdr = (struct smb_hdr *)iov[0].iov_base; - rc = wait_for_free_request(server, CIFS_ASYNC_OP); + rc = wait_for_free_request(server, ignore_pend ? CIFS_ASYNC_OP : 0); if (rc) return rc; -- cgit v1.2.3 From d2859fd49200f1f3efd8acdb54b6d51d3ab82302 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 23 May 2011 08:26:16 +0200 Subject: ALSA: HDA: Add quirk for Lenovo U350 Add model=asus quirk for Lenovo Ideapad U350 to make internal mic work correctly. Cc: stable@kernel.org (2.6.38+) BugLink: http://bugs.launchpad.net/bugs/751681 Reported-by: Kent Baxley Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 4f37477d3c71..e8725d24bd05 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3098,6 +3098,7 @@ static const struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo Thinkpad", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT5066_THINKPAD), + SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo U350", CXT5066_ASUS), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS), SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */ {} -- cgit v1.2.3 From 8e531cdfeb75269c6c5aae33651cca39707848da Mon Sep 17 00:00:00 2001 From: liubo Date: Fri, 6 May 2011 10:36:09 +0800 Subject: Btrfs: do not flush csum items of unchanged file data during treelog The current code relogs the entire inode every time during fsync log, and it is much better suited to small files rather than large ones. During my performance test, the fsync performace of large files sucks, and we can ascribe this to the tremendous amount of csum infos of the large ones, cause we have to flush all of these csum infos into log trees even when there are only _one_ change in the whole file data. Apparently, to optimize fsync, we need to create a filter to skip the unnecessary csum ones, that is, the corresponding file data remains unchanged before this fsync. Here I have some test results to show, I use sysbench to do "random write + fsync". === sysbench --test=fileio --num-threads=1 --file-num=2 --file-block-size=4K --file-total-size=8G --file-test-mode=rndwr --file-io-mode=sync --file-extra-flags= [prepare, run] === Sysbench args: - Number of threads: 1 - Extra file open flags: 0 - 2 files, 4Gb each - Block size 4Kb - Number of random requests for random IO: 10000 - Read/Write ratio for combined random IO test: 1.50 - Periodic FSYNC enabled, calling fsync() each 100 requests. - Calling fsync() at the end of test, Enabled. - Using synchronous I/O mode - Doing random write test Sysbench results: === Operations performed: 0 Read, 10000 Write, 200 Other = 10200 Total Read 0b Written 39.062Mb Total transferred 39.062Mb === a) without patch: (*SPEED* : 451.01Kb/sec) 112.75 Requests/sec executed b) with patch: (*SPEED* : 4.7533Mb/sec) 1216.84 Requests/sec executed PS: I've made a _sub transid_ stuff patch, but it does not perform as effectively as this patch, and I'm wanderring where the problem is and trying to improve it more. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/tree-log.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index b4c191d6c774..0f5537e60bb4 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -2667,6 +2667,9 @@ static noinline int copy_items(struct btrfs_trans_handle *trans, extent = btrfs_item_ptr(src, start_slot + i, struct btrfs_file_extent_item); + if (btrfs_file_extent_generation(src, extent) < trans->transid) + continue; + found_type = btrfs_file_extent_type(src, extent); if (found_type == BTRFS_FILE_EXTENT_REG || found_type == BTRFS_FILE_EXTENT_PREALLOC) { -- cgit v1.2.3 From 6291319d4864848efc7b5d81389e2404fb478cb9 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Apr 2011 14:27:21 -0600 Subject: arm/dt: consolidate atags setup into setup_machine_atags In preparation for adding device tree support, this patch consolidates all of the atag-specific setup into a single function. v5: - drop double printk("Machine; %s\n", ...); call. - leave copying boot_command_line in setup_arch() since it isn't atags specific. v4: - adapt to the removal of lookup_machine_type() - break out dump of machine_desc table into dump_machine_table() because the device tree probe code will use it. - Add for_each_machine_desc() macro Tested-by: Tony Lindgren Acked-by: Nicolas Pitre Acked-by: Russell King Signed-off-by: Grant Likely --- arch/arm/include/asm/mach/arch.h | 7 ++++ arch/arm/kernel/setup.c | 69 +++++++++++++++++++++++----------------- 2 files changed, 47 insertions(+), 29 deletions(-) diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index bf13b814c1b8..4764e67fb93d 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -47,6 +47,13 @@ struct machine_desc { */ extern struct machine_desc *machine_desc; +/* + * Machine type table - also only accessible during boot + */ +extern struct machine_desc __arch_info_begin[], __arch_info_end[]; +#define for_each_machine_desc(p) \ + for (p = __arch_info_begin; p < __arch_info_end; p++) + /* * Set of macros to define architecture features. This is built into * a table by the linker. diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 109997e3fe4a..42c2f0cedf1b 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -439,25 +439,12 @@ void cpu_init(void) : "r14"); } -static struct machine_desc * __init setup_machine(unsigned int nr) +static void __init dump_machine_table(void) { - extern struct machine_desc __arch_info_begin[], __arch_info_end[]; struct machine_desc *p; - /* - * locate machine in the list of supported machines. - */ - for (p = __arch_info_begin; p < __arch_info_end; p++) - if (nr == p->nr) { - printk("Machine: %s\n", p->name); - return p; - } - - early_print("\n" - "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n" - "Available machine support:\n\nID (hex)\tNAME\n", nr); - - for (p = __arch_info_begin; p < __arch_info_end; p++) + early_print("Available machine support:\n\nID (hex)\tNAME\n"); + for_each_machine_desc(p) early_print("%08x\t%s\n", p->nr, p->name); early_print("\nPlease check your kernel config and/or bootloader.\n"); @@ -796,23 +783,29 @@ static void __init squash_mem_tags(struct tag *tag) tag->hdr.tag = ATAG_NONE; } -void __init setup_arch(char **cmdline_p) +static struct machine_desc * __init setup_machine_tags(unsigned int nr) { struct tag *tags = (struct tag *)&init_tags; - struct machine_desc *mdesc; + struct machine_desc *mdesc = NULL, *p; char *from = default_command_line; init_tags.mem.start = PHYS_OFFSET; - unwind_init(); - - setup_processor(); - mdesc = setup_machine(machine_arch_type); - machine_desc = mdesc; - machine_name = mdesc->name; + /* + * locate machine in the list of supported machines. + */ + for_each_machine_desc(p) + if (nr == p->nr) { + printk("Machine: %s\n", p->name); + mdesc = p; + break; + } - if (mdesc->soft_reboot) - reboot_setup("s"); + if (!mdesc) { + early_print("\nError: unrecognized/unsupported machine ID" + " (r1 = 0x%08x).\n\n", nr); + dump_machine_table(); /* does not return */ + } if (__atags_pointer) tags = phys_to_virt(__atags_pointer); @@ -857,14 +850,32 @@ void __init setup_arch(char **cmdline_p) parse_tags(tags); } + /* parse_early_param needs a boot_command_line */ + strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); + + return mdesc; +} + + +void __init setup_arch(char **cmdline_p) +{ + struct machine_desc *mdesc; + + unwind_init(); + + setup_processor(); + mdesc = setup_machine_tags(machine_arch_type); + machine_desc = mdesc; + machine_name = mdesc->name; + + if (mdesc->soft_reboot) + reboot_setup("s"); + init_mm.start_code = (unsigned long) _text; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) _end; - /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); - /* populate cmd_line too for later use, preserving boot_command_line */ strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = cmd_line; -- cgit v1.2.3 From 93c02ab40ae6e06cb24d14845d9f008fdd24f43d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Apr 2011 14:27:21 -0600 Subject: arm/dt: probe for platforms via the device tree If a dtb is passed to the kernel then the kernel needs to iterate through compiled-in mdescs looking for one that matches and move the dtb data to a safe location before it gets accidentally overwritten by the kernel. This patch creates a new function, setup_machine_fdt() which is analogous to the setup_machine_atags() created in the previous patch. It does all the early setup needed to use a device tree machine description. v5: - Print warning with neither dtb nor atags are passed to the kernel - Fix bug in setting of __machine_arch_type to the selected machine, not just the last machine in the list. Reported-by: Tixy - Copy command line directly into boot_command_line instead of cmd_line v4: - Dump some output when a matching machine_desc cannot be found v3: - Added processing of reserved list. - Backed out the v2 change that copied instead of reserved the dtb. dtb is reserved again and the real problem was fixed by using alloc_bootmem_align() for early allocation of RAM for unflattening the tree. - Moved cmd_line and initrd changes to earlier patch to make series bisectable. v2: Changed to save the dtb by copying into an allocated buffer. - Since the dtb will very likely be passed in the first 16k of ram where the interrupt vectors live, memblock_reserve() is insufficient to protect the dtb data. [based on work originally written by Jeremy Kerr ] Tested-by: Tony Lindgren Acked-by: Nicolas Pitre Acked-by: Russell King Signed-off-by: Grant Likely --- arch/arm/include/asm/mach/arch.h | 2 + arch/arm/include/asm/prom.h | 12 +++++ arch/arm/include/asm/setup.h | 2 + arch/arm/kernel/devtree.c | 98 ++++++++++++++++++++++++++++++++++++++++ arch/arm/kernel/setup.c | 23 ++++++++-- arch/arm/mm/init.c | 2 + 6 files changed, 135 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 4764e67fb93d..946f4d778f71 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -18,6 +18,8 @@ struct machine_desc { unsigned int nr; /* architecture number */ const char *name; /* architecture name */ unsigned long boot_params; /* tagged list */ + const char **dt_compat; /* array of device tree + * 'compatible' strings */ unsigned int nr_irqs; /* number of IRQs */ diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index 8f1037fdc08f..11b8708fc4db 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -21,5 +21,17 @@ static inline void irq_dispose_mapping(unsigned int virq) return; } +extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); +extern void arm_dt_memblock_reserve(void); + +#else /* CONFIG_OF */ + +static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys) +{ + return NULL; +} + +static inline void arm_dt_memblock_reserve(void) { } + #endif /* CONFIG_OF */ #endif /* ASMARM_PROM_H */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 93b4702ffa0f..ee2ad8ae07af 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -218,6 +218,8 @@ extern struct meminfo meminfo; #define bank_phys_size(bank) (bank)->size extern int arm_add_memory(phys_addr_t start, unsigned long size); +extern void early_print(const char *str, ...); +extern void dump_machine_table(void); #endif /* __KERNEL__ */ diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 75e3df85b88c..a701e4226a6c 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -21,6 +21,8 @@ #include #include +#include +#include void __init early_init_dt_add_memory_arch(u64 base, u64 size) { @@ -32,6 +34,102 @@ void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) return alloc_bootmem_align(size, align); } +void __init arm_dt_memblock_reserve(void) +{ + u64 *reserve_map, base, size; + + if (!initial_boot_params) + return; + + /* Reserve the dtb region */ + memblock_reserve(virt_to_phys(initial_boot_params), + be32_to_cpu(initial_boot_params->totalsize)); + + /* + * Process the reserve map. This will probably overlap the initrd + * and dtb locations which are already reserved, but overlaping + * doesn't hurt anything + */ + reserve_map = ((void*)initial_boot_params) + + be32_to_cpu(initial_boot_params->off_mem_rsvmap); + while (1) { + base = be64_to_cpup(reserve_map++); + size = be64_to_cpup(reserve_map++); + if (!size) + break; + memblock_reserve(base, size); + } +} + +/** + * setup_machine_fdt - Machine setup when an dtb was passed to the kernel + * @dt_phys: physical address of dt blob + * + * If a dtb was passed to the kernel in r2, then use it to choose the + * correct machine_desc and to setup the system. + */ +struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) +{ + struct boot_param_header *devtree; + struct machine_desc *mdesc, *mdesc_best = NULL; + unsigned int score, mdesc_score = ~1; + unsigned long dt_root; + const char *model; + + devtree = phys_to_virt(dt_phys); + + /* check device tree validity */ + if (be32_to_cpu(devtree->magic) != OF_DT_HEADER) + return NULL; + + /* Search the mdescs for the 'best' compatible value match */ + initial_boot_params = devtree; + dt_root = of_get_flat_dt_root(); + for_each_machine_desc(mdesc) { + score = of_flat_dt_match(dt_root, mdesc->dt_compat); + if (score > 0 && score < mdesc_score) { + mdesc_best = mdesc; + mdesc_score = score; + } + } + if (!mdesc_best) { + const char *prop; + long size; + + early_print("\nError: unrecognized/unsupported " + "device tree compatible list:\n[ "); + + prop = of_get_flat_dt_prop(dt_root, "compatible", &size); + while (size > 0) { + early_print("'%s' ", prop); + size -= strlen(prop) + 1; + prop += strlen(prop) + 1; + } + early_print("]\n\n"); + + dump_machine_table(); /* does not return */ + } + + model = of_get_flat_dt_prop(dt_root, "model", NULL); + if (!model) + model = of_get_flat_dt_prop(dt_root, "compatible", NULL); + if (!model) + model = ""; + pr_info("Machine: %s, model: %s\n", mdesc_best->name, model); + + /* Retrieve various information from the /chosen node */ + of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line); + /* Initialize {size,address}-cells info */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + /* Setup memory, calling early_init_dt_add_memory_arch */ + of_scan_flat_dt(early_init_dt_scan_memory, NULL); + + /* Change machine number to match the mdesc we're using */ + __machine_arch_type = mdesc_best->nr; + + return mdesc_best; +} + /** * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq# * diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 42c2f0cedf1b..05db25ef3dd5 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -42,6 +43,7 @@ #include #include +#include #include #include #include @@ -309,7 +311,7 @@ static void __init cacheid_init(void) */ extern struct proc_info_list *lookup_processor_type(unsigned int); -static void __init early_print(const char *str, ...) +void __init early_print(const char *str, ...) { extern void printascii(const char *); char buf[256]; @@ -439,7 +441,7 @@ void cpu_init(void) : "r14"); } -static void __init dump_machine_table(void) +void __init dump_machine_table(void) { struct machine_desc *p; @@ -837,8 +839,17 @@ static struct machine_desc * __init setup_machine_tags(unsigned int nr) if (tags->hdr.tag != ATAG_CORE) convert_to_tag_list(tags); #endif - if (tags->hdr.tag != ATAG_CORE) + + if (tags->hdr.tag != ATAG_CORE) { +#if defined(CONFIG_OF) + /* + * If CONFIG_OF is set, then assume this is a reasonably + * modern system that should pass boot parameters + */ + early_print("Warning: Neither atags nor dtb found\n"); +#endif tags = (struct tag *)&init_tags; + } if (mdesc->fixup) mdesc->fixup(mdesc, tags, &from, &meminfo); @@ -864,7 +875,9 @@ void __init setup_arch(char **cmdline_p) unwind_init(); setup_processor(); - mdesc = setup_machine_tags(machine_arch_type); + mdesc = setup_machine_fdt(__atags_pointer); + if (!mdesc) + mdesc = setup_machine_tags(machine_arch_type); machine_desc = mdesc; machine_name = mdesc->name; @@ -887,6 +900,8 @@ void __init setup_arch(char **cmdline_p) paging_init(mdesc); request_standard_resources(mdesc); + unflatten_device_tree(); + #ifdef CONFIG_SMP if (is_smp()) smp_init_cpus(); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 26c405421f4e..b26597552ebc 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -22,6 +22,7 @@ #include #include +#include #include #include #include @@ -322,6 +323,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) #endif arm_mm_memblock_reserve(); + arm_dt_memblock_reserve(); /* reserve any platform specific memblock areas */ if (mdesc->reserve) -- cgit v1.2.3 From ede338f4ce2fb5ee99d18751df32fbd3b10df268 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 28 Apr 2011 14:27:23 -0600 Subject: dt: add documentation of ARM dt boot interface v6: typo fixes v5: clarified that dtb should be aligned on a 64 bit boundary in RAM. v3: added details to Documentation/arm/Booting Acked-by: Tony Lindgren Acked-by: Nicolas Pitre Acked-by: Russell King Signed-off-by: Grant Likely --- Documentation/arm/Booting | 33 ++++++++++++++--- Documentation/devicetree/booting-without-of.txt | 48 ++++++++++++++++++++++--- 2 files changed, 73 insertions(+), 8 deletions(-) diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index 76850295af8f..4e686a2ed91e 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -65,13 +65,19 @@ looks at the connected hardware is beyond the scope of this document. The boot loader must ultimately be able to provide a MACH_TYPE_xxx value to the kernel. (see linux/arch/arm/tools/mach-types). - -4. Setup the kernel tagged list -------------------------------- +4. Setup boot data +------------------ Existing boot loaders: OPTIONAL, HIGHLY RECOMMENDED New boot loaders: MANDATORY +The boot loader must provide either a tagged list or a dtb image for +passing configuration data to the kernel. The physical address of the +boot data is passed to the kernel in register r2. + +4a. Setup the kernel tagged list +-------------------------------- + The boot loader must create and initialise the kernel tagged list. A valid tagged list starts with ATAG_CORE and ends with ATAG_NONE. The ATAG_CORE tag may or may not be empty. An empty ATAG_CORE tag @@ -101,6 +107,24 @@ The tagged list must be placed in a region of memory where neither the kernel decompressor nor initrd 'bootp' program will overwrite it. The recommended placement is in the first 16KiB of RAM. +4b. Setup the device tree +------------------------- + +The boot loader must load a device tree image (dtb) into system ram +at a 64bit aligned address and initialize it with the boot data. The +dtb format is documented in Documentation/devicetree/booting-without-of.txt. +The kernel will look for the dtb magic value of 0xd00dfeed at the dtb +physical address to determine if a dtb has been passed instead of a +tagged list. + +The boot loader must pass at a minimum the size and location of the +system memory, and the root filesystem location. The dtb must be +placed in a region of memory where the kernel decompressor will not +overwrite it. The recommended placement is in the first 16KiB of RAM +with the caveat that it may not be located at physical address 0 since +the kernel interprets a value of 0 in r2 to mean neither a tagged list +nor a dtb were passed. + 5. Calling the kernel image --------------------------- @@ -125,7 +149,8 @@ In either case, the following conditions must be met: - CPU register settings r0 = 0, r1 = machine type number discovered in (3) above. - r2 = physical address of tagged list in system RAM. + r2 = physical address of tagged list in system RAM, or + physical address of device tree block (dtb) in system RAM - CPU mode All forms of interrupts must be disabled (IRQs and FIQs) diff --git a/Documentation/devicetree/booting-without-of.txt b/Documentation/devicetree/booting-without-of.txt index 50619a0720a8..7c1329de0596 100644 --- a/Documentation/devicetree/booting-without-of.txt +++ b/Documentation/devicetree/booting-without-of.txt @@ -12,8 +12,9 @@ Table of Contents ================= I - Introduction - 1) Entry point for arch/powerpc - 2) Entry point for arch/x86 + 1) Entry point for arch/arm + 2) Entry point for arch/powerpc + 3) Entry point for arch/x86 II - The DT block format 1) Header @@ -148,7 +149,46 @@ upgrades without significantly impacting the kernel code or cluttering it with special cases. -1) Entry point for arch/powerpc +1) Entry point for arch/arm +--------------------------- + + There is one single entry point to the kernel, at the start + of the kernel image. That entry point supports two calling + conventions. A summary of the interface is described here. A full + description of the boot requirements is documented in + Documentation/arm/Booting + + a) ATAGS interface. Minimal information is passed from firmware + to the kernel with a tagged list of predefined parameters. + + r0 : 0 + + r1 : Machine type number + + r2 : Physical address of tagged list in system RAM + + b) Entry with a flattened device-tree block. Firmware loads the + physical address of the flattened device tree block (dtb) into r2, + r1 is not used, but it is considered good practise to use a valid + machine number as described in Documentation/arm/Booting. + + r0 : 0 + + r1 : Valid machine type number. When using a device tree, + a single machine type number will often be assigned to + represent a class or family of SoCs. + + r2 : physical pointer to the device-tree block + (defined in chapter II) in RAM. Device tree can be located + anywhere in system RAM, but it should be aligned on a 64 bit + boundary. + + The kernel will differentiate between ATAGS and device tree booting by + reading the memory pointed to by r2 and looking for either the flattened + device tree block magic value (0xd00dfeed) or the ATAG_CORE value at + offset 0x4 from r2 (0x54410001). + +2) Entry point for arch/powerpc ------------------------------- There is one single entry point to the kernel, at the start @@ -226,7 +266,7 @@ it with special cases. cannot support both configurations with Book E and configurations with classic Powerpc architectures. -2) Entry point for arch/x86 +3) Entry point for arch/x86 ------------------------------- There is one single 32bit entry point to the kernel at code32_start, -- cgit v1.2.3 From 1a717c00501f02200fa003755e54f9fcbd2f865b Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Mon, 23 May 2011 21:05:48 +0530 Subject: davinci: move DM64XX_VDD3P3V_PWDN to devices.c Move the definition of DM64XX_VDD3P3V_PWDN from hardware.h to devices.c since it is used only there. This also helps rid hardware.h of platform private stuff. Signed-off-by: Manjunath Hadli Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/devices.c | 3 +++ arch/arm/mach-davinci/include/mach/hardware.h | 3 --- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 22ebc64bc9d9..8f4f736aa267 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -33,6 +33,9 @@ #define DM365_MMCSD0_BASE 0x01D11000 #define DM365_MMCSD1_BASE 0x01D00000 +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 + static struct resource i2c_resources[] = { { .start = DAVINCI_I2C_BASE, diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index c45ba1f62a11..414e0b93e741 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -21,9 +21,6 @@ */ #define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 -/* System control register offsets */ -#define DM64XX_VDD3P3V_PWDN 0x48 - /* * I/O mapping */ -- cgit v1.2.3 From 74b2107543da4ed9607ec484f63c42362dc9fca6 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 13 Apr 2011 12:02:53 -0400 Subject: Btrfs: make sure to use the delalloc reserve when filling delalloc In the prealloc filling code and compressed code we don't set trans->block_rsv to the delalloc block reserve properly, which is going to make us use metadata from the wrong pool, this patch fixes that. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 7cd8ab0ef04d..3b9f1643aa57 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -619,6 +619,7 @@ retry: trans = btrfs_join_transaction(root, 1); BUG_ON(IS_ERR(trans)); + trans->block_rsv = &root->fs_info->delalloc_block_rsv; ret = btrfs_reserve_extent(trans, root, async_extent->compressed_size, async_extent->compressed_size, @@ -1060,6 +1061,7 @@ static noinline int run_delalloc_nocow(struct inode *inode, trans = btrfs_join_transaction(root, 1); } BUG_ON(IS_ERR(trans)); + trans->block_rsv = &root->fs_info->delalloc_block_rsv; cow_start = (u64)-1; cur_offset = start; -- cgit v1.2.3 From 7a7eaa40a39bde4eefc91aadeb1ce3dc4e6a1252 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 13 Apr 2011 12:54:33 -0400 Subject: Btrfs: take away the num_items argument from btrfs_join_transaction I keep forgetting that btrfs_join_transaction() just ignores the num_items argument, which leads me to sending pointless patches and looking stupid :). So just kill the num_items argument from btrfs_join_transaction and btrfs_start_ioctl_transaction, since neither of them use it. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/disk-io.c | 6 +++--- fs/btrfs/extent-tree.c | 12 ++++++------ fs/btrfs/inode.c | 34 +++++++++++++++++----------------- fs/btrfs/ioctl.c | 4 ++-- fs/btrfs/relocation.c | 12 ++++++------ fs/btrfs/transaction.c | 13 +++++-------- fs/btrfs/transaction.h | 9 +++------ 7 files changed, 42 insertions(+), 48 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 228cf36ece83..9d6c9e332ca3 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1568,7 +1568,7 @@ static int transaction_kthread(void *arg) transid = cur->transid; spin_unlock(&root->fs_info->new_trans_lock); - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); if (transid == trans->transid) { ret = btrfs_commit_transaction(trans, root); @@ -2495,13 +2495,13 @@ int btrfs_commit_super(struct btrfs_root *root) down_write(&root->fs_info->cleanup_work_sem); up_write(&root->fs_info->cleanup_work_sem); - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) return PTR_ERR(trans); ret = btrfs_commit_transaction(trans, root); BUG_ON(ret); /* run commit again to drop the original snapshot */ - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) return PTR_ERR(trans); btrfs_commit_transaction(trans, root); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 9ee6bd55e16c..941b28e78931 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3174,7 +3174,7 @@ again: spin_unlock(&data_sinfo->lock); alloc: alloc_target = btrfs_get_alloc_profile(root, 1); - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) return PTR_ERR(trans); @@ -3202,7 +3202,7 @@ alloc: commit_trans: if (!committed && !root->fs_info->open_ioctl_trans) { committed = 1; - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) return PTR_ERR(trans); ret = btrfs_commit_transaction(trans, root); @@ -3589,7 +3589,7 @@ again: goto out; ret = -ENOSPC; - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) goto out; ret = btrfs_commit_transaction(trans, root); @@ -3816,7 +3816,7 @@ int btrfs_block_rsv_check(struct btrfs_trans_handle *trans, if (trans) return -EAGAIN; - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); ret = btrfs_commit_transaction(trans, root); return 0; @@ -7649,7 +7649,7 @@ int btrfs_drop_dead_reloc_roots(struct btrfs_root *root) BUG_ON(reloc_root->commit_root != NULL); while (1) { - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); mutex_lock(&root->fs_info->drop_mutex); @@ -8176,7 +8176,7 @@ int btrfs_set_block_group_ro(struct btrfs_root *root, BUG_ON(cache->ro); - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); alloc_flags = update_block_group_flags(root, cache->flags); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 3b9f1643aa57..e47bdf0fb75a 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -420,7 +420,7 @@ again: } } if (start == 0) { - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; @@ -617,7 +617,7 @@ retry: async_extent->start + async_extent->ram_size - 1, GFP_NOFS); - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); trans->block_rsv = &root->fs_info->delalloc_block_rsv; ret = btrfs_reserve_extent(trans, root, @@ -779,7 +779,7 @@ static noinline int cow_file_range(struct inode *inode, int ret = 0; BUG_ON(root == root->fs_info->tree_root); - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; @@ -1056,9 +1056,9 @@ static noinline int run_delalloc_nocow(struct inode *inode, BUG_ON(!path); if (root == root->fs_info->tree_root) { nolock = true; - trans = btrfs_join_transaction_nolock(root, 1); + trans = btrfs_join_transaction_nolock(root); } else { - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); } BUG_ON(IS_ERR(trans)); trans->block_rsv = &root->fs_info->delalloc_block_rsv; @@ -1718,9 +1718,9 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) ret = btrfs_ordered_update_i_size(inode, 0, ordered_extent); if (!ret) { if (nolock) - trans = btrfs_join_transaction_nolock(root, 1); + trans = btrfs_join_transaction_nolock(root); else - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; @@ -1735,9 +1735,9 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) 0, &cached_state, GFP_NOFS); if (nolock) - trans = btrfs_join_transaction_nolock(root, 1); + trans = btrfs_join_transaction_nolock(root); else - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; @@ -2415,7 +2415,7 @@ int btrfs_orphan_cleanup(struct btrfs_root *root) (u64)-1); if (root->orphan_block_rsv || root->orphan_item_inserted) { - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); if (!IS_ERR(trans)) btrfs_end_transaction(trans, root); } @@ -4378,9 +4378,9 @@ int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc) if (wbc->sync_mode == WB_SYNC_ALL) { if (nolock) - trans = btrfs_join_transaction_nolock(root, 1); + trans = btrfs_join_transaction_nolock(root); else - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) return PTR_ERR(trans); btrfs_set_trans_block_group(trans, inode); @@ -4407,7 +4407,7 @@ void btrfs_dirty_inode(struct inode *inode) if (BTRFS_I(inode)->dummy_inode) return; - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); btrfs_set_trans_block_group(trans, inode); @@ -5226,7 +5226,7 @@ again: free_extent_map(em); em = NULL; btrfs_release_path(root, path); - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) return ERR_CAST(trans); goto again; @@ -5470,7 +5470,7 @@ static struct extent_map *btrfs_new_extent_direct(struct inode *inode, btrfs_drop_extent_cache(inode, start, start + len - 1, 0); } - trans = btrfs_join_transaction(root, 0); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) return ERR_CAST(trans); @@ -5703,7 +5703,7 @@ static int btrfs_get_blocks_direct(struct inode *inode, sector_t iblock, * to make sure the current transaction stays open * while we look for nocow cross refs */ - trans = btrfs_join_transaction(root, 0); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) goto must_cow; @@ -5841,7 +5841,7 @@ again: BUG_ON(!ordered); - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) { err = -ENOMEM; goto out; diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 2616f7ed4799..908c3d4b48c6 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -242,7 +242,7 @@ static int btrfs_ioctl_setflags(struct file *file, void __user *arg) ip->flags &= ~(BTRFS_INODE_COMPRESS | BTRFS_INODE_NOCOMPRESS); } - trans = btrfs_join_transaction(root, 1); + trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); ret = btrfs_update_inode(trans, root, inode); @@ -2182,7 +2182,7 @@ static long btrfs_ioctl_trans_start(struct file *file) mutex_unlock(&root->fs_info->trans_mutex); ret = -ENOMEM; - trans = btrfs_start_ioctl_transaction(root, 0); + trans = btrfs_start_ioctl_transaction(root); if (IS_ERR(trans)) goto out_drop; diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 199a80134312..8bb256667f2d 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -2149,7 +2149,7 @@ again: err = ret; } - trans = btrfs_join_transaction(rc->extent_root, 1); + trans = btrfs_join_transaction(rc->extent_root); if (IS_ERR(trans)) { if (!err) btrfs_block_rsv_release(rc->extent_root, @@ -3233,7 +3233,7 @@ truncate: goto out; } - trans = btrfs_join_transaction(root, 0); + trans = btrfs_join_transaction(root); if (IS_ERR(trans)) { btrfs_free_path(path); ret = PTR_ERR(trans); @@ -3642,7 +3642,7 @@ int prepare_to_relocate(struct reloc_control *rc) rc->create_reloc_tree = 1; set_reloc_control(rc); - trans = btrfs_join_transaction(rc->extent_root, 1); + trans = btrfs_join_transaction(rc->extent_root); BUG_ON(IS_ERR(trans)); btrfs_commit_transaction(trans, rc->extent_root); return 0; @@ -3831,7 +3831,7 @@ restart: btrfs_block_rsv_release(rc->extent_root, rc->block_rsv, (u64)-1); /* get rid of pinned extents */ - trans = btrfs_join_transaction(rc->extent_root, 1); + trans = btrfs_join_transaction(rc->extent_root); if (IS_ERR(trans)) err = PTR_ERR(trans); else @@ -4156,7 +4156,7 @@ int btrfs_recover_relocation(struct btrfs_root *root) set_reloc_control(rc); - trans = btrfs_join_transaction(rc->extent_root, 1); + trans = btrfs_join_transaction(rc->extent_root); if (IS_ERR(trans)) { unset_reloc_control(rc); err = PTR_ERR(trans); @@ -4190,7 +4190,7 @@ int btrfs_recover_relocation(struct btrfs_root *root) unset_reloc_control(rc); - trans = btrfs_join_transaction(rc->extent_root, 1); + trans = btrfs_join_transaction(rc->extent_root); if (IS_ERR(trans)) err = PTR_ERR(trans); else diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index c571734d5e5a..70bfb26df967 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -257,22 +257,19 @@ struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root, { return start_transaction(root, num_items, TRANS_START); } -struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root, - int num_blocks) +struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root) { return start_transaction(root, 0, TRANS_JOIN); } -struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root, - int num_blocks) +struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root) { return start_transaction(root, 0, TRANS_JOIN_NOLOCK); } -struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r, - int num_blocks) +struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *root) { - return start_transaction(r, 0, TRANS_USERSPACE); + return start_transaction(root, 0, TRANS_USERSPACE); } /* wait for a transaction commit to be fully complete */ @@ -1171,7 +1168,7 @@ int btrfs_commit_transaction_async(struct btrfs_trans_handle *trans, INIT_DELAYED_WORK(&ac->work, do_async_commit); ac->root = root; - ac->newtrans = btrfs_join_transaction(root, 0); + ac->newtrans = btrfs_join_transaction(root); if (IS_ERR(ac->newtrans)) { int err = PTR_ERR(ac->newtrans); kfree(ac); diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index e441acc6c584..1f573f09dba2 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -92,12 +92,9 @@ int btrfs_end_transaction_nolock(struct btrfs_trans_handle *trans, struct btrfs_root *root); struct btrfs_trans_handle *btrfs_start_transaction(struct btrfs_root *root, int num_items); -struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root, - int num_blocks); -struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root, - int num_blocks); -struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *r, - int num_blocks); +struct btrfs_trans_handle *btrfs_join_transaction(struct btrfs_root *root); +struct btrfs_trans_handle *btrfs_join_transaction_nolock(struct btrfs_root *root); +struct btrfs_trans_handle *btrfs_start_ioctl_transaction(struct btrfs_root *root); int btrfs_wait_for_commit(struct btrfs_root *root, u64 transid); int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans, struct btrfs_root *root); -- cgit v1.2.3 From 2a1eb4614d984d5cd4c928784e9afcf5c07f93be Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 13 Apr 2011 15:15:59 -0400 Subject: Btrfs: if we've already started a trans handle, use that one We currently track trans handles in current->journal_info, but we don't actually use it. This patch fixes it. This will cover the case where we have multiple people starting transactions down the call chain. This keeps us from having to allocate a new handle and all of that, we just increase the use count of the current handle, save the old block_rsv, and return. I tested this with xfstests and it worked out fine. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/transaction.c | 17 +++++++++++++++++ fs/btrfs/transaction.h | 2 ++ 2 files changed, 19 insertions(+) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 70bfb26df967..46f40564c168 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -184,6 +184,15 @@ static struct btrfs_trans_handle *start_transaction(struct btrfs_root *root, if (root->fs_info->fs_state & BTRFS_SUPER_FLAG_ERROR) return ERR_PTR(-EROFS); + + if (current->journal_info) { + WARN_ON(type != TRANS_JOIN && type != TRANS_JOIN_NOLOCK); + h = current->journal_info; + h->use_count++; + h->orig_rsv = h->block_rsv; + h->block_rsv = NULL; + goto got_it; + } again: h = kmem_cache_alloc(btrfs_trans_handle_cachep, GFP_NOFS); if (!h) @@ -213,7 +222,9 @@ again: h->block_group = 0; h->bytes_reserved = 0; h->delayed_ref_updates = 0; + h->use_count = 1; h->block_rsv = NULL; + h->orig_rsv = NULL; smp_mb(); if (cur_trans->blocked && may_wait_transaction(root, type)) { @@ -241,6 +252,7 @@ again: } } +got_it: if (type != TRANS_JOIN_NOLOCK) mutex_lock(&root->fs_info->trans_mutex); record_root_in_trans(h, root); @@ -428,6 +440,11 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans, struct btrfs_fs_info *info = root->fs_info; int count = 0; + if (--trans->use_count) { + trans->block_rsv = trans->orig_rsv; + return 0; + } + while (count < 4) { unsigned long cur = trans->delayed_ref_updates; trans->delayed_ref_updates = 0; diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index 1f573f09dba2..154314f80f8d 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -47,11 +47,13 @@ struct btrfs_trans_handle { u64 transid; u64 block_group; u64 bytes_reserved; + unsigned long use_count; unsigned long blocks_reserved; unsigned long blocks_used; unsigned long delayed_ref_updates; struct btrfs_transaction *transaction; struct btrfs_block_rsv *block_rsv; + struct btrfs_block_rsv *orig_rsv; }; struct btrfs_pending_snapshot { -- cgit v1.2.3 From a4abeea41adfa3c143c289045f4625dfaeba2212 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 11 Apr 2011 17:25:13 -0400 Subject: Btrfs: kill trans_mutex We use trans_mutex for lots of things, here's a basic list 1) To serialize trans_handles joining the currently running transaction 2) To make sure that no new trans handles are started while we are committing 3) To protect the dead_roots list and the transaction lists Really the serializing trans_handles joining is not too hard, and can really get bogged down in acquiring a reference to the transaction. So replace the trans_mutex with a trans_lock spinlock and use it to do the following 1) Protect fs_info->running_transaction. All trans handles have to do is check this, and then take a reference of the transaction and keep on going. 2) Protect the fs_info->trans_list. This doesn't get used too much, basically it just holds the current transactions, which will usually just be the currently committing transaction and the currently running transaction at most. 3) Protect the dead roots list. This is only ever processed by splicing the list so this is relatively simple. 4) Protect the fs_info->reloc_ctl stuff. This is very lightweight and was using the trans_mutex before, so this is a pretty straightforward change. 5) Protect fs_info->no_trans_join. Because we don't hold the trans_lock over the entirety of the commit we need to have a way to block new people from creating a new transaction while we're doing our work. So we set no_trans_join and in join_transaction we test to see if that is set, and if it is we do a wait_on_commit. 6) Make the transaction use count atomic so we don't need to take locks to modify it when we're dropping references. 7) Add a commit_lock to the transaction to make sure multiple people trying to commit the same transaction don't race and commit at the same time. 8) Make open_ioctl_trans an atomic so we don't have to take any locks for ioctl trans. I have tested this with xfstests, but obviously it is a pretty hairy change so lots of testing is greatly appreciated. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/ctree.h | 6 +- fs/btrfs/disk-io.c | 30 +++--- fs/btrfs/extent-tree.c | 3 +- fs/btrfs/file.c | 4 +- fs/btrfs/ioctl.c | 12 +-- fs/btrfs/relocation.c | 16 +-- fs/btrfs/transaction.c | 271 ++++++++++++++++++++++++++----------------------- fs/btrfs/transaction.h | 4 +- 8 files changed, 177 insertions(+), 169 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8f4b81de3ae2..522a39b0033d 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -919,7 +919,6 @@ struct btrfs_fs_info { * is required instead of the faster short fsync log commits */ u64 last_trans_log_full_commit; - u64 open_ioctl_trans; unsigned long mount_opt:20; unsigned long compress_type:4; u64 max_inline; @@ -936,7 +935,6 @@ struct btrfs_fs_info { struct super_block *sb; struct inode *btree_inode; struct backing_dev_info bdi; - struct mutex trans_mutex; struct mutex tree_log_mutex; struct mutex transaction_kthread_mutex; struct mutex cleaner_mutex; @@ -957,6 +955,7 @@ struct btrfs_fs_info { struct rw_semaphore subvol_sem; struct srcu_struct subvol_srcu; + spinlock_t trans_lock; struct list_head trans_list; struct list_head hashers; struct list_head dead_roots; @@ -969,6 +968,7 @@ struct btrfs_fs_info { atomic_t async_submit_draining; atomic_t nr_async_bios; atomic_t async_delalloc_pages; + atomic_t open_ioctl_trans; /* * this is used by the balancing code to wait for all the pending @@ -1032,6 +1032,7 @@ struct btrfs_fs_info { int closing; int log_root_recovering; int enospc_unlink; + int trans_no_join; u64 total_pinned; @@ -1053,7 +1054,6 @@ struct btrfs_fs_info { struct reloc_control *reloc_ctl; spinlock_t delalloc_lock; - spinlock_t new_trans_lock; u64 delalloc_bytes; /* data_alloc_cluster is only used in ssd mode */ diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 9d6c9e332ca3..93ef254ec432 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1551,22 +1551,22 @@ static int transaction_kthread(void *arg) vfs_check_frozen(root->fs_info->sb, SB_FREEZE_WRITE); mutex_lock(&root->fs_info->transaction_kthread_mutex); - spin_lock(&root->fs_info->new_trans_lock); + spin_lock(&root->fs_info->trans_lock); cur = root->fs_info->running_transaction; if (!cur) { - spin_unlock(&root->fs_info->new_trans_lock); + spin_unlock(&root->fs_info->trans_lock); goto sleep; } now = get_seconds(); if (!cur->blocked && (now < cur->start_time || now - cur->start_time < 30)) { - spin_unlock(&root->fs_info->new_trans_lock); + spin_unlock(&root->fs_info->trans_lock); delay = HZ * 5; goto sleep; } transid = cur->transid; - spin_unlock(&root->fs_info->new_trans_lock); + spin_unlock(&root->fs_info->trans_lock); trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); @@ -1658,7 +1658,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, INIT_LIST_HEAD(&fs_info->ordered_operations); INIT_LIST_HEAD(&fs_info->caching_block_groups); spin_lock_init(&fs_info->delalloc_lock); - spin_lock_init(&fs_info->new_trans_lock); + spin_lock_init(&fs_info->trans_lock); spin_lock_init(&fs_info->ref_cache_lock); spin_lock_init(&fs_info->fs_roots_radix_lock); spin_lock_init(&fs_info->delayed_iput_lock); @@ -1687,6 +1687,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, fs_info->sb = sb; fs_info->max_inline = 8192 * 1024; fs_info->metadata_ratio = 0; + fs_info->trans_no_join = 0; fs_info->thread_pool_size = min_t(unsigned long, num_online_cpus() + 2, 8); @@ -1735,7 +1736,6 @@ struct btrfs_root *open_ctree(struct super_block *sb, fs_info->do_barriers = 1; - mutex_init(&fs_info->trans_mutex); mutex_init(&fs_info->ordered_operations_mutex); mutex_init(&fs_info->tree_log_mutex); mutex_init(&fs_info->chunk_mutex); @@ -3006,10 +3006,13 @@ static int btrfs_cleanup_transaction(struct btrfs_root *root) WARN_ON(1); - mutex_lock(&root->fs_info->trans_mutex); mutex_lock(&root->fs_info->transaction_kthread_mutex); + spin_lock(&root->fs_info->trans_lock); list_splice_init(&root->fs_info->trans_list, &list); + root->fs_info->trans_no_join = 1; + spin_unlock(&root->fs_info->trans_lock); + while (!list_empty(&list)) { t = list_entry(list.next, struct btrfs_transaction, list); if (!t) @@ -3034,23 +3037,18 @@ static int btrfs_cleanup_transaction(struct btrfs_root *root) t->blocked = 0; if (waitqueue_active(&root->fs_info->transaction_wait)) wake_up(&root->fs_info->transaction_wait); - mutex_unlock(&root->fs_info->trans_mutex); - mutex_lock(&root->fs_info->trans_mutex); t->commit_done = 1; if (waitqueue_active(&t->commit_wait)) wake_up(&t->commit_wait); - mutex_unlock(&root->fs_info->trans_mutex); - - mutex_lock(&root->fs_info->trans_mutex); btrfs_destroy_pending_snapshots(t); btrfs_destroy_delalloc_inodes(root); - spin_lock(&root->fs_info->new_trans_lock); + spin_lock(&root->fs_info->trans_lock); root->fs_info->running_transaction = NULL; - spin_unlock(&root->fs_info->new_trans_lock); + spin_unlock(&root->fs_info->trans_lock); btrfs_destroy_marked_extents(root, &t->dirty_pages, EXTENT_DIRTY); @@ -3064,8 +3062,10 @@ static int btrfs_cleanup_transaction(struct btrfs_root *root) kmem_cache_free(btrfs_transaction_cachep, t); } + spin_lock(&root->fs_info->trans_lock); + root->fs_info->trans_no_join = 0; + spin_unlock(&root->fs_info->trans_lock); mutex_unlock(&root->fs_info->transaction_kthread_mutex); - mutex_unlock(&root->fs_info->trans_mutex); return 0; } diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 941b28e78931..ca599654ce19 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3200,7 +3200,8 @@ alloc: /* commit the current transaction and try again */ commit_trans: - if (!committed && !root->fs_info->open_ioctl_trans) { + if (!committed && + !atomic_read(&root->fs_info->open_ioctl_trans)) { committed = 1; trans = btrfs_join_transaction(root); if (IS_ERR(trans)) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 75899a01dded..cd5e82e500cf 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1222,14 +1222,12 @@ int btrfs_sync_file(struct file *file, int datasync) * the current transaction, we can bail out now without any * syncing */ - mutex_lock(&root->fs_info->trans_mutex); + smp_mb(); if (BTRFS_I(inode)->last_trans <= root->fs_info->last_trans_committed) { BTRFS_I(inode)->last_trans = 0; - mutex_unlock(&root->fs_info->trans_mutex); goto out; } - mutex_unlock(&root->fs_info->trans_mutex); /* * ok we haven't committed the transaction yet, lets do a commit diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 908c3d4b48c6..a578620e06a8 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2177,9 +2177,7 @@ static long btrfs_ioctl_trans_start(struct file *file) if (ret) goto out; - mutex_lock(&root->fs_info->trans_mutex); - root->fs_info->open_ioctl_trans++; - mutex_unlock(&root->fs_info->trans_mutex); + atomic_inc(&root->fs_info->open_ioctl_trans); ret = -ENOMEM; trans = btrfs_start_ioctl_transaction(root); @@ -2190,9 +2188,7 @@ static long btrfs_ioctl_trans_start(struct file *file) return 0; out_drop: - mutex_lock(&root->fs_info->trans_mutex); - root->fs_info->open_ioctl_trans--; - mutex_unlock(&root->fs_info->trans_mutex); + atomic_dec(&root->fs_info->open_ioctl_trans); mnt_drop_write(file->f_path.mnt); out: return ret; @@ -2426,9 +2422,7 @@ long btrfs_ioctl_trans_end(struct file *file) btrfs_end_transaction(trans, root); - mutex_lock(&root->fs_info->trans_mutex); - root->fs_info->open_ioctl_trans--; - mutex_unlock(&root->fs_info->trans_mutex); + atomic_dec(&root->fs_info->open_ioctl_trans); mnt_drop_write(file->f_path.mnt); return 0; diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 8bb256667f2d..09c30d37d43e 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -2136,10 +2136,10 @@ int prepare_to_merge(struct reloc_control *rc, int err) u64 num_bytes = 0; int ret; - mutex_lock(&root->fs_info->trans_mutex); + spin_lock(&root->fs_info->trans_lock); rc->merging_rsv_size += root->nodesize * (BTRFS_MAX_LEVEL - 1) * 2; rc->merging_rsv_size += rc->nodes_relocated * 2; - mutex_unlock(&root->fs_info->trans_mutex); + spin_unlock(&root->fs_info->trans_lock); again: if (!err) { num_bytes = rc->merging_rsv_size; @@ -2208,9 +2208,9 @@ int merge_reloc_roots(struct reloc_control *rc) int ret; again: root = rc->extent_root; - mutex_lock(&root->fs_info->trans_mutex); + spin_lock(&root->fs_info->trans_lock); list_splice_init(&rc->reloc_roots, &reloc_roots); - mutex_unlock(&root->fs_info->trans_mutex); + spin_unlock(&root->fs_info->trans_lock); while (!list_empty(&reloc_roots)) { found = 1; @@ -3583,17 +3583,17 @@ next: static void set_reloc_control(struct reloc_control *rc) { struct btrfs_fs_info *fs_info = rc->extent_root->fs_info; - mutex_lock(&fs_info->trans_mutex); + spin_lock(&fs_info->trans_lock); fs_info->reloc_ctl = rc; - mutex_unlock(&fs_info->trans_mutex); + spin_unlock(&fs_info->trans_lock); } static void unset_reloc_control(struct reloc_control *rc) { struct btrfs_fs_info *fs_info = rc->extent_root->fs_info; - mutex_lock(&fs_info->trans_mutex); + spin_lock(&fs_info->trans_lock); fs_info->reloc_ctl = NULL; - mutex_unlock(&fs_info->trans_mutex); + spin_unlock(&fs_info->trans_lock); } static int check_extent_flags(u64 flags) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 46f40564c168..43816f8b23e7 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -34,6 +34,7 @@ static noinline void put_transaction(struct btrfs_transaction *transaction) { WARN_ON(atomic_read(&transaction->use_count) == 0); if (atomic_dec_and_test(&transaction->use_count)) { + BUG_ON(!list_empty(&transaction->list)); memset(transaction, 0, sizeof(*transaction)); kmem_cache_free(btrfs_transaction_cachep, transaction); } @@ -48,47 +49,73 @@ static noinline void switch_commit_root(struct btrfs_root *root) /* * either allocate a new transaction or hop into the existing one */ -static noinline int join_transaction(struct btrfs_root *root) +static noinline int join_transaction(struct btrfs_root *root, int nofail) { struct btrfs_transaction *cur_trans; + + spin_lock(&root->fs_info->trans_lock); + if (root->fs_info->trans_no_join) { + if (!nofail) { + spin_unlock(&root->fs_info->trans_lock); + return -EBUSY; + } + } + cur_trans = root->fs_info->running_transaction; - if (!cur_trans) { - cur_trans = kmem_cache_alloc(btrfs_transaction_cachep, - GFP_NOFS); - if (!cur_trans) - return -ENOMEM; - root->fs_info->generation++; - atomic_set(&cur_trans->num_writers, 1); - cur_trans->num_joined = 0; - cur_trans->transid = root->fs_info->generation; - init_waitqueue_head(&cur_trans->writer_wait); - init_waitqueue_head(&cur_trans->commit_wait); - cur_trans->in_commit = 0; - cur_trans->blocked = 0; - atomic_set(&cur_trans->use_count, 1); - cur_trans->commit_done = 0; - cur_trans->start_time = get_seconds(); - - cur_trans->delayed_refs.root = RB_ROOT; - cur_trans->delayed_refs.num_entries = 0; - cur_trans->delayed_refs.num_heads_ready = 0; - cur_trans->delayed_refs.num_heads = 0; - cur_trans->delayed_refs.flushing = 0; - cur_trans->delayed_refs.run_delayed_start = 0; - spin_lock_init(&cur_trans->delayed_refs.lock); - - INIT_LIST_HEAD(&cur_trans->pending_snapshots); - list_add_tail(&cur_trans->list, &root->fs_info->trans_list); - extent_io_tree_init(&cur_trans->dirty_pages, - root->fs_info->btree_inode->i_mapping, - GFP_NOFS); - spin_lock(&root->fs_info->new_trans_lock); - root->fs_info->running_transaction = cur_trans; - spin_unlock(&root->fs_info->new_trans_lock); - } else { + if (cur_trans) { + atomic_inc(&cur_trans->use_count); + atomic_inc(&cur_trans->num_writers); + cur_trans->num_joined++; + spin_unlock(&root->fs_info->trans_lock); + return 0; + } + spin_unlock(&root->fs_info->trans_lock); + + cur_trans = kmem_cache_alloc(btrfs_transaction_cachep, GFP_NOFS); + if (!cur_trans) + return -ENOMEM; + spin_lock(&root->fs_info->trans_lock); + if (root->fs_info->running_transaction) { + kmem_cache_free(btrfs_transaction_cachep, cur_trans); + cur_trans = root->fs_info->running_transaction; + atomic_inc(&cur_trans->use_count); atomic_inc(&cur_trans->num_writers); cur_trans->num_joined++; + spin_unlock(&root->fs_info->trans_lock); + return 0; } + atomic_set(&cur_trans->num_writers, 1); + cur_trans->num_joined = 0; + init_waitqueue_head(&cur_trans->writer_wait); + init_waitqueue_head(&cur_trans->commit_wait); + cur_trans->in_commit = 0; + cur_trans->blocked = 0; + /* + * One for this trans handle, one so it will live on until we + * commit the transaction. + */ + atomic_set(&cur_trans->use_count, 2); + cur_trans->commit_done = 0; + cur_trans->start_time = get_seconds(); + + cur_trans->delayed_refs.root = RB_ROOT; + cur_trans->delayed_refs.num_entries = 0; + cur_trans->delayed_refs.num_heads_ready = 0; + cur_trans->delayed_refs.num_heads = 0; + cur_trans->delayed_refs.flushing = 0; + cur_trans->delayed_refs.run_delayed_start = 0; + spin_lock_init(&cur_trans->commit_lock); + spin_lock_init(&cur_trans->delayed_refs.lock); + + INIT_LIST_HEAD(&cur_trans->pending_snapshots); + list_add_tail(&cur_trans->list, &root->fs_info->trans_list); + extent_io_tree_init(&cur_trans->dirty_pages, + root->fs_info->btree_inode->i_mapping, + GFP_NOFS); + root->fs_info->generation++; + cur_trans->transid = root->fs_info->generation; + root->fs_info->running_transaction = cur_trans; + spin_unlock(&root->fs_info->trans_lock); return 0; } @@ -99,39 +126,28 @@ static noinline int join_transaction(struct btrfs_root *root) * to make sure the old root from before we joined the transaction is deleted * when the transaction commits */ -static noinline int record_root_in_trans(struct btrfs_trans_handle *trans, - struct btrfs_root *root) +int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans, + struct btrfs_root *root) { if (root->ref_cows && root->last_trans < trans->transid) { WARN_ON(root == root->fs_info->extent_root); WARN_ON(root->commit_root != root->node); + spin_lock(&root->fs_info->fs_roots_radix_lock); + if (root->last_trans == trans->transid) { + spin_unlock(&root->fs_info->fs_roots_radix_lock); + return 0; + } + root->last_trans = trans->transid; radix_tree_tag_set(&root->fs_info->fs_roots_radix, (unsigned long)root->root_key.objectid, BTRFS_ROOT_TRANS_TAG); - root->last_trans = trans->transid; + spin_unlock(&root->fs_info->fs_roots_radix_lock); btrfs_init_reloc_root(trans, root); } return 0; } -int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans, - struct btrfs_root *root) -{ - if (!root->ref_cows) - return 0; - - mutex_lock(&root->fs_info->trans_mutex); - if (root->last_trans == trans->transid) { - mutex_unlock(&root->fs_info->trans_mutex); - return 0; - } - - record_root_in_trans(trans, root); - mutex_unlock(&root->fs_info->trans_mutex); - return 0; -} - /* wait for commit against the current transaction to become unblocked * when this is done, it is safe to start a new transaction, but the current * transaction might not be fully on disk. @@ -140,21 +156,23 @@ static void wait_current_trans(struct btrfs_root *root) { struct btrfs_transaction *cur_trans; + spin_lock(&root->fs_info->trans_lock); cur_trans = root->fs_info->running_transaction; if (cur_trans && cur_trans->blocked) { DEFINE_WAIT(wait); atomic_inc(&cur_trans->use_count); + spin_unlock(&root->fs_info->trans_lock); while (1) { prepare_to_wait(&root->fs_info->transaction_wait, &wait, TASK_UNINTERRUPTIBLE); if (!cur_trans->blocked) break; - mutex_unlock(&root->fs_info->trans_mutex); schedule(); - mutex_lock(&root->fs_info->trans_mutex); } finish_wait(&root->fs_info->transaction_wait, &wait); put_transaction(cur_trans); + } else { + spin_unlock(&root->fs_info->trans_lock); } } @@ -167,10 +185,16 @@ enum btrfs_trans_type { static int may_wait_transaction(struct btrfs_root *root, int type) { - if (!root->fs_info->log_root_recovering && - ((type == TRANS_START && !root->fs_info->open_ioctl_trans) || - type == TRANS_USERSPACE)) + if (root->fs_info->log_root_recovering) + return 0; + + if (type == TRANS_USERSPACE) + return 1; + + if (type == TRANS_START && + !atomic_read(&root->fs_info->open_ioctl_trans)) return 1; + return 0; } @@ -198,23 +222,21 @@ again: if (!h) return ERR_PTR(-ENOMEM); - if (type != TRANS_JOIN_NOLOCK) - mutex_lock(&root->fs_info->trans_mutex); if (may_wait_transaction(root, type)) wait_current_trans(root); - ret = join_transaction(root); + do { + ret = join_transaction(root, type == TRANS_JOIN_NOLOCK); + if (ret == -EBUSY) + wait_current_trans(root); + } while (ret == -EBUSY); + if (ret < 0) { kmem_cache_free(btrfs_trans_handle_cachep, h); - if (type != TRANS_JOIN_NOLOCK) - mutex_unlock(&root->fs_info->trans_mutex); return ERR_PTR(ret); } cur_trans = root->fs_info->running_transaction; - atomic_inc(&cur_trans->use_count); - if (type != TRANS_JOIN_NOLOCK) - mutex_unlock(&root->fs_info->trans_mutex); h->transid = cur_trans->transid; h->transaction = cur_trans; @@ -253,11 +275,7 @@ again: } got_it: - if (type != TRANS_JOIN_NOLOCK) - mutex_lock(&root->fs_info->trans_mutex); - record_root_in_trans(h, root); - if (type != TRANS_JOIN_NOLOCK) - mutex_unlock(&root->fs_info->trans_mutex); + btrfs_record_root_in_trans(h, root); if (!current->journal_info && type != TRANS_USERSPACE) current->journal_info = h; @@ -289,17 +307,13 @@ static noinline int wait_for_commit(struct btrfs_root *root, struct btrfs_transaction *commit) { DEFINE_WAIT(wait); - mutex_lock(&root->fs_info->trans_mutex); while (!commit->commit_done) { prepare_to_wait(&commit->commit_wait, &wait, TASK_UNINTERRUPTIBLE); if (commit->commit_done) break; - mutex_unlock(&root->fs_info->trans_mutex); schedule(); - mutex_lock(&root->fs_info->trans_mutex); } - mutex_unlock(&root->fs_info->trans_mutex); finish_wait(&commit->commit_wait, &wait); return 0; } @@ -309,50 +323,49 @@ int btrfs_wait_for_commit(struct btrfs_root *root, u64 transid) struct btrfs_transaction *cur_trans = NULL, *t; int ret; - mutex_lock(&root->fs_info->trans_mutex); - ret = 0; if (transid) { if (transid <= root->fs_info->last_trans_committed) - goto out_unlock; + goto out; /* find specified transaction */ + spin_lock(&root->fs_info->trans_lock); list_for_each_entry(t, &root->fs_info->trans_list, list) { if (t->transid == transid) { cur_trans = t; + atomic_inc(&cur_trans->use_count); break; } if (t->transid > transid) break; } + spin_unlock(&root->fs_info->trans_lock); ret = -EINVAL; if (!cur_trans) - goto out_unlock; /* bad transid */ + goto out; /* bad transid */ } else { /* find newest transaction that is committing | committed */ + spin_lock(&root->fs_info->trans_lock); list_for_each_entry_reverse(t, &root->fs_info->trans_list, list) { if (t->in_commit) { if (t->commit_done) - goto out_unlock; + goto out; cur_trans = t; + atomic_inc(&cur_trans->use_count); break; } } + spin_unlock(&root->fs_info->trans_lock); if (!cur_trans) - goto out_unlock; /* nothing committing|committed */ + goto out; /* nothing committing|committed */ } - atomic_inc(&cur_trans->use_count); - mutex_unlock(&root->fs_info->trans_mutex); - wait_for_commit(root, cur_trans); - mutex_lock(&root->fs_info->trans_mutex); put_transaction(cur_trans); ret = 0; -out_unlock: - mutex_unlock(&root->fs_info->trans_mutex); +out: return ret; } @@ -401,10 +414,8 @@ harder: void btrfs_throttle(struct btrfs_root *root) { - mutex_lock(&root->fs_info->trans_mutex); - if (!root->fs_info->open_ioctl_trans) + if (!atomic_read(&root->fs_info->open_ioctl_trans)) wait_current_trans(root); - mutex_unlock(&root->fs_info->trans_mutex); } static int should_end_transaction(struct btrfs_trans_handle *trans, @@ -422,6 +433,7 @@ int btrfs_should_end_transaction(struct btrfs_trans_handle *trans, struct btrfs_transaction *cur_trans = trans->transaction; int updates; + smp_mb(); if (cur_trans->blocked || cur_trans->delayed_refs.flushing) return 1; @@ -467,9 +479,11 @@ static int __btrfs_end_transaction(struct btrfs_trans_handle *trans, btrfs_trans_release_metadata(trans, root); - if (lock && !root->fs_info->open_ioctl_trans && - should_end_transaction(trans, root)) + if (lock && !atomic_read(&root->fs_info->open_ioctl_trans) && + should_end_transaction(trans, root)) { trans->transaction->blocked = 1; + smp_wmb(); + } if (lock && cur_trans->blocked && !cur_trans->in_commit) { if (throttle) @@ -739,9 +753,9 @@ static noinline int commit_cowonly_roots(struct btrfs_trans_handle *trans, */ int btrfs_add_dead_root(struct btrfs_root *root) { - mutex_lock(&root->fs_info->trans_mutex); + spin_lock(&root->fs_info->trans_lock); list_add(&root->root_list, &root->fs_info->dead_roots); - mutex_unlock(&root->fs_info->trans_mutex); + spin_unlock(&root->fs_info->trans_lock); return 0; } @@ -757,6 +771,7 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans, int ret; int err = 0; + spin_lock(&fs_info->fs_roots_radix_lock); while (1) { ret = radix_tree_gang_lookup_tag(&fs_info->fs_roots_radix, (void **)gang, 0, @@ -769,6 +784,7 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans, radix_tree_tag_clear(&fs_info->fs_roots_radix, (unsigned long)root->root_key.objectid, BTRFS_ROOT_TRANS_TAG); + spin_unlock(&fs_info->fs_roots_radix_lock); btrfs_free_log(trans, root); btrfs_update_reloc_root(trans, root); @@ -783,10 +799,12 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans, err = btrfs_update_root(trans, fs_info->tree_root, &root->root_key, &root->root_item); + spin_lock(&fs_info->fs_roots_radix_lock); if (err) break; } } + spin_unlock(&fs_info->fs_roots_radix_lock); return err; } @@ -972,7 +990,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, parent = dget_parent(dentry); parent_inode = parent->d_inode; parent_root = BTRFS_I(parent_inode)->root; - record_root_in_trans(trans, parent_root); + btrfs_record_root_in_trans(trans, parent_root); /* * insert the directory item @@ -990,7 +1008,7 @@ static noinline int create_pending_snapshot(struct btrfs_trans_handle *trans, ret = btrfs_update_inode(trans, parent_root, parent_inode); BUG_ON(ret); - record_root_in_trans(trans, root); + btrfs_record_root_in_trans(trans, root); btrfs_set_root_last_snapshot(&root->root_item, trans->transid); memcpy(new_root_item, &root->root_item, sizeof(*new_root_item)); btrfs_check_and_init_root_item(new_root_item); @@ -1080,20 +1098,20 @@ static void update_super_roots(struct btrfs_root *root) int btrfs_transaction_in_commit(struct btrfs_fs_info *info) { int ret = 0; - spin_lock(&info->new_trans_lock); + spin_lock(&info->trans_lock); if (info->running_transaction) ret = info->running_transaction->in_commit; - spin_unlock(&info->new_trans_lock); + spin_unlock(&info->trans_lock); return ret; } int btrfs_transaction_blocked(struct btrfs_fs_info *info) { int ret = 0; - spin_lock(&info->new_trans_lock); + spin_lock(&info->trans_lock); if (info->running_transaction) ret = info->running_transaction->blocked; - spin_unlock(&info->new_trans_lock); + spin_unlock(&info->trans_lock); return ret; } @@ -1117,9 +1135,7 @@ static void wait_current_trans_commit_start(struct btrfs_root *root, &wait); break; } - mutex_unlock(&root->fs_info->trans_mutex); schedule(); - mutex_lock(&root->fs_info->trans_mutex); finish_wait(&root->fs_info->transaction_blocked_wait, &wait); } } @@ -1145,9 +1161,7 @@ static void wait_current_trans_commit_start_and_unblock(struct btrfs_root *root, &wait); break; } - mutex_unlock(&root->fs_info->trans_mutex); schedule(); - mutex_lock(&root->fs_info->trans_mutex); finish_wait(&root->fs_info->transaction_wait, &wait); } @@ -1193,22 +1207,18 @@ int btrfs_commit_transaction_async(struct btrfs_trans_handle *trans, } /* take transaction reference */ - mutex_lock(&root->fs_info->trans_mutex); cur_trans = trans->transaction; atomic_inc(&cur_trans->use_count); - mutex_unlock(&root->fs_info->trans_mutex); btrfs_end_transaction(trans, root); schedule_delayed_work(&ac->work, 0); /* wait for transaction to start and unblock */ - mutex_lock(&root->fs_info->trans_mutex); if (wait_for_unblock) wait_current_trans_commit_start_and_unblock(root, cur_trans); else wait_current_trans_commit_start(root, cur_trans); put_transaction(cur_trans); - mutex_unlock(&root->fs_info->trans_mutex); return 0; } @@ -1252,38 +1262,41 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, ret = btrfs_run_delayed_refs(trans, root, 0); BUG_ON(ret); - mutex_lock(&root->fs_info->trans_mutex); + spin_lock(&cur_trans->commit_lock); if (cur_trans->in_commit) { + spin_unlock(&cur_trans->commit_lock); atomic_inc(&cur_trans->use_count); - mutex_unlock(&root->fs_info->trans_mutex); btrfs_end_transaction(trans, root); ret = wait_for_commit(root, cur_trans); BUG_ON(ret); - mutex_lock(&root->fs_info->trans_mutex); put_transaction(cur_trans); - mutex_unlock(&root->fs_info->trans_mutex); return 0; } trans->transaction->in_commit = 1; trans->transaction->blocked = 1; + spin_unlock(&cur_trans->commit_lock); wake_up(&root->fs_info->transaction_blocked_wait); + spin_lock(&root->fs_info->trans_lock); if (cur_trans->list.prev != &root->fs_info->trans_list) { prev_trans = list_entry(cur_trans->list.prev, struct btrfs_transaction, list); if (!prev_trans->commit_done) { atomic_inc(&prev_trans->use_count); - mutex_unlock(&root->fs_info->trans_mutex); + spin_unlock(&root->fs_info->trans_lock); wait_for_commit(root, prev_trans); - mutex_lock(&root->fs_info->trans_mutex); put_transaction(prev_trans); + } else { + spin_unlock(&root->fs_info->trans_lock); } + } else { + spin_unlock(&root->fs_info->trans_lock); } if (now < cur_trans->start_time || now - cur_trans->start_time < 1) @@ -1291,12 +1304,12 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, do { int snap_pending = 0; + joined = cur_trans->num_joined; if (!list_empty(&trans->transaction->pending_snapshots)) snap_pending = 1; WARN_ON(cur_trans != trans->transaction); - mutex_unlock(&root->fs_info->trans_mutex); if (flush_on_commit || snap_pending) { btrfs_start_delalloc_inodes(root, 1); @@ -1316,14 +1329,15 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, prepare_to_wait(&cur_trans->writer_wait, &wait, TASK_UNINTERRUPTIBLE); - smp_mb(); if (atomic_read(&cur_trans->num_writers) > 1) schedule_timeout(MAX_SCHEDULE_TIMEOUT); else if (should_grow) schedule_timeout(1); - mutex_lock(&root->fs_info->trans_mutex); finish_wait(&cur_trans->writer_wait, &wait); + spin_lock(&root->fs_info->trans_lock); + root->fs_info->trans_no_join = 1; + spin_unlock(&root->fs_info->trans_lock); } while (atomic_read(&cur_trans->num_writers) > 1 || (should_grow && cur_trans->num_joined != joined)); @@ -1364,9 +1378,6 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, btrfs_prepare_extent_commit(trans, root); cur_trans = root->fs_info->running_transaction; - spin_lock(&root->fs_info->new_trans_lock); - root->fs_info->running_transaction = NULL; - spin_unlock(&root->fs_info->new_trans_lock); btrfs_set_root_node(&root->fs_info->tree_root->root_item, root->fs_info->tree_root->node); @@ -1387,10 +1398,13 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, sizeof(root->fs_info->super_copy)); trans->transaction->blocked = 0; + spin_lock(&root->fs_info->trans_lock); + root->fs_info->running_transaction = NULL; + root->fs_info->trans_no_join = 0; + spin_unlock(&root->fs_info->trans_lock); wake_up(&root->fs_info->transaction_wait); - mutex_unlock(&root->fs_info->trans_mutex); ret = btrfs_write_and_wait_transaction(trans, root); BUG_ON(ret); write_ctree_super(trans, root, 0); @@ -1403,22 +1417,21 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, btrfs_finish_extent_commit(trans, root); - mutex_lock(&root->fs_info->trans_mutex); - cur_trans->commit_done = 1; root->fs_info->last_trans_committed = cur_trans->transid; wake_up(&cur_trans->commit_wait); + spin_lock(&root->fs_info->trans_lock); list_del_init(&cur_trans->list); + spin_unlock(&root->fs_info->trans_lock); + put_transaction(cur_trans); put_transaction(cur_trans); trace_btrfs_transaction_commit(root); - mutex_unlock(&root->fs_info->trans_mutex); - if (current->journal_info == trans) current->journal_info = NULL; @@ -1438,9 +1451,9 @@ int btrfs_clean_old_snapshots(struct btrfs_root *root) LIST_HEAD(list); struct btrfs_fs_info *fs_info = root->fs_info; - mutex_lock(&fs_info->trans_mutex); + spin_lock(&fs_info->trans_lock); list_splice_init(&fs_info->dead_roots, &list); - mutex_unlock(&fs_info->trans_mutex); + spin_unlock(&fs_info->trans_lock); while (!list_empty(&list)) { root = list_entry(list.next, struct btrfs_root, root_list); diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index 154314f80f8d..11c6efcd4ed2 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -28,10 +28,12 @@ struct btrfs_transaction { * transaction can end */ atomic_t num_writers; + atomic_t use_count; unsigned long num_joined; + + spinlock_t commit_lock; int in_commit; - atomic_t use_count; int commit_done; int blocked; struct list_head list; -- cgit v1.2.3 From fcb80c2affd63237cff5b34cba5756be7c976a5a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 3 May 2011 10:40:22 -0400 Subject: Btrfs: fix how we do space reservation for truncate The ceph guys keep running into problems where we have space reserved in our orphan block rsv when freeing it up. This is because they tend to do snapshots alot, so their truncates tend to use a bunch of space, so when we go to do things like update the inode we have to steal reservation space in order to make the reservation happen. This happens because truncate can use as much space as it freaking feels like, but we still have to hold space for removing the orphan item and updating the inode, which will definitely always happen. So in order to fix this we need to split all of the reservation stuf up. So with this patch we have 1) The orphan block reserve which only holds the space for deleting our orphan item when everything is over. 2) The truncate block reserve which gets allocated and used specifically for the space that the truncate will use on a per truncate basis. 3) The transaction will always have 1 item's worth of data reserved so we can update the inode normally. Hopefully this will make the ceph problem go away. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/ctree.h | 3 ++ fs/btrfs/extent-tree.c | 46 +++++++++++++++----- fs/btrfs/inode.c | 111 +++++++++++++++++++++++++++++++++++++------------ 3 files changed, 123 insertions(+), 37 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 522a39b0033d..f31aed7fedd9 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2224,6 +2224,9 @@ int btrfs_block_rsv_migrate(struct btrfs_block_rsv *src_rsv, void btrfs_block_rsv_release(struct btrfs_root *root, struct btrfs_block_rsv *block_rsv, u64 num_bytes); +int btrfs_truncate_reserve_metadata(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_block_rsv *rsv); int btrfs_set_block_group_ro(struct btrfs_root *root, struct btrfs_block_group_cache *cache); int btrfs_set_block_group_rw(struct btrfs_root *root, diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index ca599654ce19..a2ca561c70f0 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3980,6 +3980,37 @@ static u64 calc_trans_metadata_size(struct btrfs_root *root, int num_items) 3 * num_items; } +int btrfs_truncate_reserve_metadata(struct btrfs_trans_handle *trans, + struct btrfs_root *root, + struct btrfs_block_rsv *rsv) +{ + struct btrfs_block_rsv *trans_rsv = &root->fs_info->trans_block_rsv; + u64 num_bytes; + int ret; + + /* + * Truncate should be freeing data, but give us 2 items just in case it + * needs to use some space. We may want to be smarter about this in the + * future. + */ + num_bytes = calc_trans_metadata_size(root, 2); + + /* We already have enough bytes, just return */ + if (rsv->reserved >= num_bytes) + return 0; + + num_bytes -= rsv->reserved; + + /* + * You should have reserved enough space before hand to do this, so this + * should not fail. + */ + ret = block_rsv_migrate_bytes(trans_rsv, rsv, num_bytes); + BUG_ON(ret); + + return 0; +} + int btrfs_trans_reserve_metadata(struct btrfs_trans_handle *trans, struct btrfs_root *root, int num_items) @@ -4020,23 +4051,18 @@ int btrfs_orphan_reserve_metadata(struct btrfs_trans_handle *trans, struct btrfs_block_rsv *dst_rsv = root->orphan_block_rsv; /* - * one for deleting orphan item, one for updating inode and - * two for calling btrfs_truncate_inode_items. - * - * btrfs_truncate_inode_items is a delete operation, it frees - * more space than it uses in most cases. So two units of - * metadata space should be enough for calling it many times. - * If all of the metadata space is used, we can commit - * transaction and use space it freed. + * We need to hold space in order to delete our orphan item once we've + * added it, so this takes the reservation so we can release it later + * when we are truly done with the orphan item. */ - u64 num_bytes = calc_trans_metadata_size(root, 4); + u64 num_bytes = calc_trans_metadata_size(root, 1); return block_rsv_migrate_bytes(src_rsv, dst_rsv, num_bytes); } void btrfs_orphan_release_metadata(struct inode *inode) { struct btrfs_root *root = BTRFS_I(inode)->root; - u64 num_bytes = calc_trans_metadata_size(root, 4); + u64 num_bytes = calc_trans_metadata_size(root, 1); btrfs_block_rsv_release(root, root->orphan_block_rsv, num_bytes); } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index e47bdf0fb75a..bc12ba23db5f 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6591,6 +6591,7 @@ out: static int btrfs_truncate(struct inode *inode) { struct btrfs_root *root = BTRFS_I(inode)->root; + struct btrfs_block_rsv *rsv; int ret; int err = 0; struct btrfs_trans_handle *trans; @@ -6604,28 +6605,83 @@ static int btrfs_truncate(struct inode *inode) btrfs_wait_ordered_range(inode, inode->i_size & (~mask), (u64)-1); btrfs_ordered_update_i_size(inode, inode->i_size, NULL); - trans = btrfs_start_transaction(root, 5); - if (IS_ERR(trans)) - return PTR_ERR(trans); + /* + * Yes ladies and gentelment, this is indeed ugly. The fact is we have + * 3 things going on here + * + * 1) We need to reserve space for our orphan item and the space to + * delete our orphan item. Lord knows we don't want to have a dangling + * orphan item because we didn't reserve space to remove it. + * + * 2) We need to reserve space to update our inode. + * + * 3) We need to have something to cache all the space that is going to + * be free'd up by the truncate operation, but also have some slack + * space reserved in case it uses space during the truncate (thank you + * very much snapshotting). + * + * And we need these to all be seperate. The fact is we can use alot of + * space doing the truncate, and we have no earthly idea how much space + * we will use, so we need the truncate reservation to be seperate so it + * doesn't end up using space reserved for updating the inode or + * removing the orphan item. We also need to be able to stop the + * transaction and start a new one, which means we need to be able to + * update the inode several times, and we have no idea of knowing how + * many times that will be, so we can't just reserve 1 item for the + * entirety of the opration, so that has to be done seperately as well. + * Then there is the orphan item, which does indeed need to be held on + * to for the whole operation, and we need nobody to touch this reserved + * space except the orphan code. + * + * So that leaves us with + * + * 1) root->orphan_block_rsv - for the orphan deletion. + * 2) rsv - for the truncate reservation, which we will steal from the + * transaction reservation. + * 3) fs_info->trans_block_rsv - this will have 1 items worth left for + * updating the inode. + */ + rsv = btrfs_alloc_block_rsv(root); + if (!rsv) + return -ENOMEM; + btrfs_add_durable_block_rsv(root->fs_info, rsv); + + trans = btrfs_start_transaction(root, 4); + if (IS_ERR(trans)) { + err = PTR_ERR(trans); + goto out; + } btrfs_set_trans_block_group(trans, inode); + /* + * Reserve space for the truncate process. Truncate should be adding + * space, but if there are snapshots it may end up using space. + */ + ret = btrfs_truncate_reserve_metadata(trans, root, rsv); + BUG_ON(ret); + ret = btrfs_orphan_add(trans, inode); if (ret) { btrfs_end_transaction(trans, root); - return ret; + goto out; } nr = trans->blocks_used; btrfs_end_transaction(trans, root); btrfs_btree_balance_dirty(root, nr); - /* Now start a transaction for the truncate */ - trans = btrfs_start_transaction(root, 0); - if (IS_ERR(trans)) - return PTR_ERR(trans); + /* + * Ok so we've already migrated our bytes over for the truncate, so here + * just reserve the one slot we need for updating the inode. + */ + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) { + err = PTR_ERR(trans); + goto out; + } btrfs_set_trans_block_group(trans, inode); - trans->block_rsv = root->orphan_block_rsv; + trans->block_rsv = rsv; /* * setattr is responsible for setting the ordered_data_close flag, @@ -6649,24 +6705,18 @@ static int btrfs_truncate(struct inode *inode) while (1) { if (!trans) { - trans = btrfs_start_transaction(root, 0); - if (IS_ERR(trans)) - return PTR_ERR(trans); - btrfs_set_trans_block_group(trans, inode); - trans->block_rsv = root->orphan_block_rsv; - } + trans = btrfs_start_transaction(root, 3); + if (IS_ERR(trans)) { + err = PTR_ERR(trans); + goto out; + } - ret = btrfs_block_rsv_check(trans, root, - root->orphan_block_rsv, 0, 5); - if (ret == -EAGAIN) { - ret = btrfs_commit_transaction(trans, root); - if (ret) - return ret; - trans = NULL; - continue; - } else if (ret) { - err = ret; - break; + ret = btrfs_truncate_reserve_metadata(trans, root, + rsv); + BUG_ON(ret); + + btrfs_set_trans_block_group(trans, inode); + trans->block_rsv = rsv; } ret = btrfs_truncate_inode_items(trans, root, inode, @@ -6677,6 +6727,7 @@ static int btrfs_truncate(struct inode *inode) break; } + trans->block_rsv = &root->fs_info->trans_block_rsv; ret = btrfs_update_inode(trans, root, inode); if (ret) { err = ret; @@ -6690,6 +6741,7 @@ static int btrfs_truncate(struct inode *inode) } if (ret == 0 && inode->i_nlink > 0) { + trans->block_rsv = root->orphan_block_rsv; ret = btrfs_orphan_del(trans, inode); if (ret) err = ret; @@ -6701,15 +6753,20 @@ static int btrfs_truncate(struct inode *inode) ret = btrfs_orphan_del(NULL, inode); } + trans->block_rsv = &root->fs_info->trans_block_rsv; ret = btrfs_update_inode(trans, root, inode); if (ret && !err) err = ret; nr = trans->blocks_used; ret = btrfs_end_transaction_throttle(trans, root); + btrfs_btree_balance_dirty(root, nr); + +out: + btrfs_free_block_rsv(root, rsv); + if (ret && !err) err = ret; - btrfs_btree_balance_dirty(root, nr); return err; } -- cgit v1.2.3 From af60bed24eb0e3b6d93eaa6bb395a5721e6c09a8 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 4 May 2011 11:11:17 -0400 Subject: Btrfs: set range_start to the right start in count_range_bits In count_range_bits we are adjusting total_bytes based on the range we are searching for, but we don't adjust the range start according to the range we are searching for, which makes for weird results. For example, if the range [0-8192] is set DELALLOC, but I search for 4096-8192, I will get back 4096 for the number of bytes found, but the range_start will be 0, which makes it look like the range is [0-4096]. So instead set range_start = max(cur_start, state->start). This makes everything come out right. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/extent_io.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index ba41da59e31b..b5f6f227a97c 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1480,7 +1480,7 @@ u64 count_range_bits(struct extent_io_tree *tree, if (total_bytes >= max_bytes) break; if (!found) { - *start = state->start; + *start = max(cur_start, state->start); found = 1; } last = state->end; -- cgit v1.2.3 From cb25c2ea6a79702ab7895b873c6c43e0d3bc3c72 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 11 May 2011 12:17:34 -0400 Subject: Btrfs: map the node block when looking for readahead targets If we have particularly full nodes, we could call btrfs_node_blockptr up to 32 times, which is 32 pairs of kmap/kunmap, which _sucks_. So go ahead and map the extent buffer while we look for readahead targets. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/ctree.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 84d7ca1fe0ba..009bcf7f1e4b 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1229,6 +1229,7 @@ static void reada_for_search(struct btrfs_root *root, u64 search; u64 target; u64 nread = 0; + u64 gen; int direction = path->reada; struct extent_buffer *eb; u32 nr; @@ -1256,6 +1257,15 @@ static void reada_for_search(struct btrfs_root *root, nritems = btrfs_header_nritems(node); nr = slot; while (1) { + if (!node->map_token) { + unsigned long offset = btrfs_node_key_ptr_offset(nr); + map_private_extent_buffer(node, offset, + sizeof(struct btrfs_key_ptr), + &node->map_token, + &node->kaddr, + &node->map_start, + &node->map_len, KM_USER1); + } if (direction < 0) { if (nr == 0) break; @@ -1273,14 +1283,23 @@ static void reada_for_search(struct btrfs_root *root, search = btrfs_node_blockptr(node, nr); if ((search <= target && target - search <= 65536) || (search > target && search - target <= 65536)) { - readahead_tree_block(root, search, blocksize, - btrfs_node_ptr_generation(node, nr)); + gen = btrfs_node_ptr_generation(node, nr); + if (node->map_token) { + unmap_extent_buffer(node, node->map_token, + KM_USER1); + node->map_token = NULL; + } + readahead_tree_block(root, search, blocksize, gen); nread += blocksize; } nscan++; if ((nread > 65536 || nscan > 32)) break; } + if (node->map_token) { + unmap_extent_buffer(node, node->map_token, KM_USER1); + node->map_token = NULL; + } } /* -- cgit v1.2.3 From 7e2355ba1a11649f0b212a29fdb9f47476f1248e Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 11 May 2011 12:25:37 -0400 Subject: Btrfs: don't look at the extent buffer level 3 times in a row We have a bit of debugging in btrfs_search_slot to make sure the level of the cow block is the same as the original block we were cow'ing. I don't think I've ever seen this tripped, so kill it. This saves us 2 kmap's per level in our search. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/ctree.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 009bcf7f1e4b..f7a0a64b868f 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -1672,9 +1672,6 @@ again: } cow_done: BUG_ON(!cow && ins_len); - if (level != btrfs_header_level(b)) - WARN_ON(1); - level = btrfs_header_level(b); p->nodes[level] = b; if (!p->skip_locking) -- cgit v1.2.3 From d82a6f1d7e8b61ed5996334d0db66651bb43641d Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 11 May 2011 15:26:06 -0400 Subject: Btrfs: kill BTRFS_I(inode)->block_group Originally this was going to be used as a way to give hints to the allocator, but frankly we can get much better hints elsewhere and it's not even used at all for anything usefull. In addition to be completely useless, when we initialize an inode we try and find a freeish block group to set as the inodes block group, and with a completely full 40gb fs this takes _forever_, so I imagine with say 1tb fs this is just unbearable. So just axe the thing altoghether, we don't need it and it saves us 8 bytes in the inode and saves us 500 microseconds per inode lookup in my testcase. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/btrfs_inode.h | 3 -- fs/btrfs/ctree.h | 3 +- fs/btrfs/extent-tree.c | 10 ++---- fs/btrfs/inode.c | 87 ++++++-------------------------------------------- fs/btrfs/ioctl.c | 3 +- fs/btrfs/transaction.c | 1 - fs/btrfs/transaction.h | 14 -------- fs/btrfs/xattr.c | 2 -- 8 files changed, 13 insertions(+), 110 deletions(-) diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index 57c3bb2884ce..4bc852d3b83d 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -120,9 +120,6 @@ struct btrfs_inode { */ u64 index_cnt; - /* the start of block group preferred for allocations. */ - u64 block_group; - /* the fsync log has some corner cases that mean we have to check * directories to see if any unlinks have been done before * the directory was logged. See tree-log.c for all the diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index f31aed7fedd9..0f8c489bcc02 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2512,8 +2512,7 @@ int btrfs_set_extent_delalloc(struct inode *inode, u64 start, u64 end, int btrfs_writepages(struct address_space *mapping, struct writeback_control *wbc); int btrfs_create_subvol_root(struct btrfs_trans_handle *trans, - struct btrfs_root *new_root, - u64 new_dirid, u64 alloc_hint); + struct btrfs_root *new_root, u64 new_dirid); int btrfs_merge_bio_hook(struct page *page, unsigned long offset, size_t size, struct bio *bio, unsigned long bio_flags); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index a2ca561c70f0..9f0a4e3bd8a9 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5319,6 +5319,7 @@ checks: btrfs_add_free_space(block_group, offset, search_start - offset); BUG_ON(offset > search_start); + btrfs_put_block_group(block_group); break; loop: failed_cluster_refill = false; @@ -5411,14 +5412,7 @@ loop: ret = -ENOSPC; } else if (!ins->objectid) { ret = -ENOSPC; - } - - /* we found what we needed */ - if (ins->objectid) { - if (!(data & BTRFS_BLOCK_GROUP_DATA)) - trans->block_group = block_group->key.objectid; - - btrfs_put_block_group(block_group); + } else if (ins->objectid) { ret = 0; } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index bc12ba23db5f..dd5938a7de21 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -136,7 +136,6 @@ static noinline int insert_inline_extent(struct btrfs_trans_handle *trans, return -ENOMEM; path->leave_spinning = 1; - btrfs_set_trans_block_group(trans, inode); key.objectid = inode->i_ino; key.offset = start; @@ -422,7 +421,6 @@ again: if (start == 0) { trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); - btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; /* lets try to make an inline extent */ @@ -781,7 +779,6 @@ static noinline int cow_file_range(struct inode *inode, BUG_ON(root == root->fs_info->tree_root); trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); - btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; num_bytes = (end - start + blocksize) & ~(blocksize - 1); @@ -1502,8 +1499,6 @@ static noinline int add_pending_csums(struct btrfs_trans_handle *trans, { struct btrfs_ordered_sum *sum; - btrfs_set_trans_block_group(trans, inode); - list_for_each_entry(sum, list, list) { btrfs_csum_file_blocks(trans, BTRFS_I(inode)->root->fs_info->csum_root, sum); @@ -1722,7 +1717,6 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) else trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); - btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; ret = btrfs_update_inode(trans, root, inode); BUG_ON(ret); @@ -1739,7 +1733,6 @@ static int btrfs_finish_ordered_io(struct inode *inode, u64 start, u64 end) else trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); - btrfs_set_trans_block_group(trans, inode); trans->block_rsv = &root->fs_info->delalloc_block_rsv; if (test_bit(BTRFS_ORDERED_COMPRESSED, &ordered_extent->flags)) @@ -2495,7 +2488,6 @@ static void btrfs_read_locked_inode(struct inode *inode) struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_key location; int maybe_acls; - u64 alloc_group_block; u32 rdev; int ret; @@ -2539,8 +2531,6 @@ static void btrfs_read_locked_inode(struct inode *inode) BTRFS_I(inode)->index_cnt = (u64)-1; BTRFS_I(inode)->flags = btrfs_inode_flags(leaf, inode_item); - alloc_group_block = btrfs_inode_block_group(leaf, inode_item); - /* * try to precache a NULL acl entry for files that don't have * any xattrs or acls @@ -2549,8 +2539,6 @@ static void btrfs_read_locked_inode(struct inode *inode) if (!maybe_acls) cache_no_acl(inode); - BTRFS_I(inode)->block_group = btrfs_find_block_group(root, 0, - alloc_group_block, 0); btrfs_free_path(path); inode_item = NULL; @@ -2630,7 +2618,7 @@ static void fill_inode_item(struct btrfs_trans_handle *trans, btrfs_set_inode_transid(leaf, item, trans->transid); btrfs_set_inode_rdev(leaf, item, inode->i_rdev); btrfs_set_inode_flags(leaf, item, BTRFS_I(inode)->flags); - btrfs_set_inode_block_group(leaf, item, BTRFS_I(inode)->block_group); + btrfs_set_inode_block_group(leaf, item, 0); if (leaf->map_token) { unmap_extent_buffer(leaf, leaf->map_token, KM_USER1); @@ -2971,8 +2959,6 @@ static int btrfs_unlink(struct inode *dir, struct dentry *dentry) if (IS_ERR(trans)) return PTR_ERR(trans); - btrfs_set_trans_block_group(trans, dir); - btrfs_record_unlink_dir(trans, dir, dentry->d_inode, 0); ret = btrfs_unlink_inode(trans, root, dir, dentry->d_inode, @@ -3068,8 +3054,6 @@ static int btrfs_rmdir(struct inode *dir, struct dentry *dentry) if (IS_ERR(trans)) return PTR_ERR(trans); - btrfs_set_trans_block_group(trans, dir); - if (unlikely(inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) { err = btrfs_unlink_subvol(trans, root, dir, BTRFS_I(inode)->location.objectid, @@ -3649,7 +3633,6 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) err = PTR_ERR(trans); break; } - btrfs_set_trans_block_group(trans, inode); err = btrfs_drop_extents(trans, inode, cur_offset, cur_offset + hole_size, @@ -3785,7 +3768,6 @@ void btrfs_evict_inode(struct inode *inode) while (1) { trans = btrfs_start_transaction(root, 0); BUG_ON(IS_ERR(trans)); - btrfs_set_trans_block_group(trans, inode); trans->block_rsv = root->orphan_block_rsv; ret = btrfs_block_rsv_check(trans, root, @@ -4383,7 +4365,6 @@ int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc) trans = btrfs_join_transaction(root); if (IS_ERR(trans)) return PTR_ERR(trans); - btrfs_set_trans_block_group(trans, inode); if (nolock) ret = btrfs_end_transaction_nolock(trans, root); else @@ -4409,7 +4390,6 @@ void btrfs_dirty_inode(struct inode *inode) trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); - btrfs_set_trans_block_group(trans, inode); ret = btrfs_update_inode(trans, root, inode); if (ret && ret == -ENOSPC) { @@ -4424,7 +4404,6 @@ void btrfs_dirty_inode(struct inode *inode) } return; } - btrfs_set_trans_block_group(trans, inode); ret = btrfs_update_inode(trans, root, inode); if (ret) { @@ -4519,8 +4498,8 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct inode *dir, const char *name, int name_len, - u64 ref_objectid, u64 objectid, - u64 alloc_hint, int mode, u64 *index) + u64 ref_objectid, u64 objectid, int mode, + u64 *index) { struct inode *inode; struct btrfs_inode_item *inode_item; @@ -4567,8 +4546,6 @@ static struct inode *btrfs_new_inode(struct btrfs_trans_handle *trans, owner = 0; else owner = 1; - BTRFS_I(inode)->block_group = - btrfs_find_block_group(root, 0, alloc_hint, owner); key[0].objectid = objectid; btrfs_set_key_type(&key[0], BTRFS_INODE_ITEM_KEY); @@ -4729,11 +4706,9 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, if (IS_ERR(trans)) return PTR_ERR(trans); - btrfs_set_trans_block_group(trans, dir); - inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, dentry->d_name.len, dir->i_ino, objectid, - BTRFS_I(dir)->block_group, mode, &index); + mode, &index); if (IS_ERR(inode)) { err = PTR_ERR(inode); goto out_unlock; @@ -4745,7 +4720,6 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, goto out_unlock; } - btrfs_set_trans_block_group(trans, inode); err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; @@ -4754,8 +4728,6 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, init_special_inode(inode, inode->i_mode, rdev); btrfs_update_inode(trans, root, inode); } - btrfs_update_inode_block_group(trans, inode); - btrfs_update_inode_block_group(trans, dir); out_unlock: nr = trans->blocks_used; btrfs_end_transaction_throttle(trans, root); @@ -4791,11 +4763,9 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, if (IS_ERR(trans)) return PTR_ERR(trans); - btrfs_set_trans_block_group(trans, dir); - inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, dentry->d_name.len, dir->i_ino, objectid, - BTRFS_I(dir)->block_group, mode, &index); + mode, &index); if (IS_ERR(inode)) { err = PTR_ERR(inode); goto out_unlock; @@ -4807,7 +4777,6 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, goto out_unlock; } - btrfs_set_trans_block_group(trans, inode); err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; @@ -4818,8 +4787,6 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, inode->i_op = &btrfs_file_inode_operations; BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops; } - btrfs_update_inode_block_group(trans, inode); - btrfs_update_inode_block_group(trans, dir); out_unlock: nr = trans->blocks_used; btrfs_end_transaction_throttle(trans, root); @@ -4866,8 +4833,6 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir, btrfs_inc_nlink(inode); inode->i_ctime = CURRENT_TIME; - - btrfs_set_trans_block_group(trans, dir); ihold(inode); err = btrfs_add_nondir(trans, dir, dentry, inode, 1, index); @@ -4876,7 +4841,6 @@ static int btrfs_link(struct dentry *old_dentry, struct inode *dir, drop_inode = 1; } else { struct dentry *parent = dget_parent(dentry); - btrfs_update_inode_block_group(trans, dir); err = btrfs_update_inode(trans, root, inode); BUG_ON(err); btrfs_log_new_name(trans, inode, NULL, parent); @@ -4917,12 +4881,10 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) trans = btrfs_start_transaction(root, 5); if (IS_ERR(trans)) return PTR_ERR(trans); - btrfs_set_trans_block_group(trans, dir); inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, dentry->d_name.len, dir->i_ino, objectid, - BTRFS_I(dir)->block_group, S_IFDIR | mode, - &index); + S_IFDIR | mode, &index); if (IS_ERR(inode)) { err = PTR_ERR(inode); goto out_fail; @@ -4936,7 +4898,6 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) inode->i_op = &btrfs_dir_inode_operations; inode->i_fop = &btrfs_dir_file_operations; - btrfs_set_trans_block_group(trans, inode); btrfs_i_size_write(inode, 0); err = btrfs_update_inode(trans, root, inode); @@ -4950,8 +4911,6 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) d_instantiate(dentry, inode); drop_on_err = 0; - btrfs_update_inode_block_group(trans, inode); - btrfs_update_inode_block_group(trans, dir); out_fail: nr = trans->blocks_used; @@ -6652,8 +6611,6 @@ static int btrfs_truncate(struct inode *inode) goto out; } - btrfs_set_trans_block_group(trans, inode); - /* * Reserve space for the truncate process. Truncate should be adding * space, but if there are snapshots it may end up using space. @@ -6680,7 +6637,6 @@ static int btrfs_truncate(struct inode *inode) err = PTR_ERR(trans); goto out; } - btrfs_set_trans_block_group(trans, inode); trans->block_rsv = rsv; /* @@ -6715,7 +6671,6 @@ static int btrfs_truncate(struct inode *inode) rsv); BUG_ON(ret); - btrfs_set_trans_block_group(trans, inode); trans->block_rsv = rsv; } @@ -6775,15 +6730,14 @@ out: * create a new subvolume directory/inode (helper for the ioctl). */ int btrfs_create_subvol_root(struct btrfs_trans_handle *trans, - struct btrfs_root *new_root, - u64 new_dirid, u64 alloc_hint) + struct btrfs_root *new_root, u64 new_dirid) { struct inode *inode; int err; u64 index = 0; inode = btrfs_new_inode(trans, new_root, NULL, "..", 2, new_dirid, - new_dirid, alloc_hint, S_IFDIR | 0700, &index); + new_dirid, S_IFDIR | 0700, &index); if (IS_ERR(inode)) return PTR_ERR(inode); inode->i_op = &btrfs_dir_inode_operations; @@ -6893,21 +6847,6 @@ void btrfs_destroy_inode(struct inode *inode) spin_unlock(&root->fs_info->ordered_extent_lock); } - if (root == root->fs_info->tree_root) { - struct btrfs_block_group_cache *block_group; - - block_group = btrfs_lookup_block_group(root->fs_info, - BTRFS_I(inode)->block_group); - if (block_group && block_group->inode == inode) { - spin_lock(&block_group->lock); - block_group->inode = NULL; - spin_unlock(&block_group->lock); - btrfs_put_block_group(block_group); - } else if (block_group) { - btrfs_put_block_group(block_group); - } - } - spin_lock(&root->orphan_lock); if (!list_empty(&BTRFS_I(inode)->i_orphan)) { printk(KERN_INFO "BTRFS: inode %lu still on the orphan list\n", @@ -7091,8 +7030,6 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, goto out_notrans; } - btrfs_set_trans_block_group(trans, new_dir); - if (dest != root) btrfs_record_root_in_trans(trans, dest); @@ -7331,12 +7268,9 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, if (IS_ERR(trans)) return PTR_ERR(trans); - btrfs_set_trans_block_group(trans, dir); - inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name, dentry->d_name.len, dir->i_ino, objectid, - BTRFS_I(dir)->block_group, S_IFLNK|S_IRWXUGO, - &index); + S_IFLNK|S_IRWXUGO, &index); if (IS_ERR(inode)) { err = PTR_ERR(inode); goto out_unlock; @@ -7348,7 +7282,6 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, goto out_unlock; } - btrfs_set_trans_block_group(trans, inode); err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; @@ -7359,8 +7292,6 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, inode->i_op = &btrfs_file_inode_operations; BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops; } - btrfs_update_inode_block_group(trans, inode); - btrfs_update_inode_block_group(trans, dir); if (drop_inode) goto out_unlock; diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index a578620e06a8..8e90ccf4b76a 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -413,8 +413,7 @@ static noinline int create_subvol(struct btrfs_root *root, btrfs_record_root_in_trans(trans, new_root); - ret = btrfs_create_subvol_root(trans, new_root, new_dirid, - BTRFS_I(dir)->block_group); + ret = btrfs_create_subvol_root(trans, new_root, new_dirid); /* * insert the directory item */ diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 43816f8b23e7..f4ea695325b2 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -241,7 +241,6 @@ again: h->transid = cur_trans->transid; h->transaction = cur_trans; h->blocks_used = 0; - h->block_group = 0; h->bytes_reserved = 0; h->delayed_ref_updates = 0; h->use_count = 1; diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h index 11c6efcd4ed2..da7289e06a82 100644 --- a/fs/btrfs/transaction.h +++ b/fs/btrfs/transaction.h @@ -47,7 +47,6 @@ struct btrfs_transaction { struct btrfs_trans_handle { u64 transid; - u64 block_group; u64 bytes_reserved; unsigned long use_count; unsigned long blocks_reserved; @@ -70,19 +69,6 @@ struct btrfs_pending_snapshot { struct list_head list; }; -static inline void btrfs_set_trans_block_group(struct btrfs_trans_handle *trans, - struct inode *inode) -{ - trans->block_group = BTRFS_I(inode)->block_group; -} - -static inline void btrfs_update_inode_block_group( - struct btrfs_trans_handle *trans, - struct inode *inode) -{ - BTRFS_I(inode)->block_group = trans->block_group; -} - static inline void btrfs_set_inode_last_trans(struct btrfs_trans_handle *trans, struct inode *inode) { diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c index cfd660550ded..72ab0295ca74 100644 --- a/fs/btrfs/xattr.c +++ b/fs/btrfs/xattr.c @@ -158,8 +158,6 @@ int __btrfs_setxattr(struct btrfs_trans_handle *trans, if (IS_ERR(trans)) return PTR_ERR(trans); - btrfs_set_trans_block_group(trans, inode); - ret = do_setxattr(trans, inode, name, value, size, flags); if (ret) goto out; -- cgit v1.2.3 From 589d8ade83f07c0f11c8191c0ca309f34d7a2c14 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 11 May 2011 17:30:53 -0400 Subject: Btrfs: try not to sleep as much when doing slow caching When the fs is super full and we unmount the fs, we could get stuck in this thing where unmount is waiting for the caching kthread to make progress and the caching kthread keeps scheduling because we're in the middle of a commit. So instead just let the caching kthread keep going and only yeild if need_resched(). This makes my horrible umount case go from taking up to 10 minutes to taking less than 20 seconds. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 9f0a4e3bd8a9..96be62450318 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -378,15 +378,18 @@ again: if (ret) break; - caching_ctl->progress = last; - btrfs_release_path(extent_root, path); - up_read(&fs_info->extent_commit_sem); - mutex_unlock(&caching_ctl->mutex); - if (btrfs_transaction_in_commit(fs_info)) - schedule_timeout(1); - else + if (need_resched() || + btrfs_next_leaf(extent_root, path)) { + caching_ctl->progress = last; + btrfs_release_path(extent_root, path); + up_read(&fs_info->extent_commit_sem); + mutex_unlock(&caching_ctl->mutex); cond_resched(); - goto again; + goto again; + } + leaf = path->nodes[0]; + nritems = btrfs_header_nritems(leaf); + continue; } if (key.objectid < block_group->key.objectid) { -- cgit v1.2.3 From 026fd317828500524cdc7e5ff9e8e7923abb2868 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 13 May 2011 10:32:11 -0400 Subject: Btrfs: don't always do readahead Our readahead is sort of sloppy, and really isn't always needed. For example if ls is doing a stating ls (which is the default) it's going to stat in non-disk order, so if say you have a directory with a stupid amount of files, readahead is going to do nothing but waste time in the case of doing the stat. Taking the unconditional readahead out made my test go from 57 minutes to 36 minutes. This means that everywhere we do loop through the tree we want to make sure we do set path->reada properly, so I went through and found all of the places where we loop through the path and set reada to 1. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/ctree.c | 2 -- fs/btrfs/extent-tree.c | 3 ++- fs/btrfs/inode.c | 14 ++++++++++++-- fs/btrfs/relocation.c | 6 ++++++ 4 files changed, 20 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index f7a0a64b868f..f61c16c1481a 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -48,8 +48,6 @@ struct btrfs_path *btrfs_alloc_path(void) { struct btrfs_path *path; path = kmem_cache_zalloc(btrfs_path_cachep, GFP_NOFS); - if (path) - path->reada = 1; return path; } diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 96be62450318..1ba2cc58eab5 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -347,7 +347,7 @@ static int caching_kthread(void *data) */ path->skip_locking = 1; path->search_commit_root = 1; - path->reada = 2; + path->reada = 1; key.objectid = last; key.offset = 0; @@ -8556,6 +8556,7 @@ int btrfs_read_block_groups(struct btrfs_root *root) path = btrfs_alloc_path(); if (!path) return -ENOMEM; + path->reada = 1; cache_gen = btrfs_super_cache_generation(&root->fs_info->super_copy); if (cache_gen != 0 && diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index dd5938a7de21..6228a304b547 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4242,7 +4242,9 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, filp->f_pos = 2; } path = btrfs_alloc_path(); - path->reada = 2; + if (!path) + return -ENOMEM; + path->reada = 1; btrfs_set_key_type(&key, key_type); key.offset = filp->f_pos; @@ -5043,7 +5045,15 @@ again: if (!path) { path = btrfs_alloc_path(); - BUG_ON(!path); + if (!path) { + err = -ENOMEM; + goto out; + } + /* + * Chances are we'll be called again, so go ahead and do + * readahead + */ + path->reada = 1; } ret = btrfs_lookup_file_extent(trans, root, path, diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 09c30d37d43e..5872b41581f4 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -676,6 +676,8 @@ struct backref_node *build_backref_tree(struct reloc_control *rc, err = -ENOMEM; goto out; } + path1->reada = 1; + path2->reada = 2; node = alloc_backref_node(cache); if (!node) { @@ -1996,6 +1998,7 @@ static noinline_for_stack int merge_reloc_root(struct reloc_control *rc, path = btrfs_alloc_path(); if (!path) return -ENOMEM; + path->reada = 1; reloc_root = root->reloc_root; root_item = &reloc_root->root_item; @@ -3297,6 +3300,7 @@ static int find_data_references(struct reloc_control *rc, path = btrfs_alloc_path(); if (!path) return -ENOMEM; + path->reada = 1; root = read_fs_root(rc->extent_root->fs_info, ref_root); if (IS_ERR(root)) { @@ -3665,6 +3669,7 @@ static noinline_for_stack int relocate_block_group(struct reloc_control *rc) path = btrfs_alloc_path(); if (!path) return -ENOMEM; + path->reada = 1; ret = prepare_to_relocate(rc); if (ret) { @@ -4090,6 +4095,7 @@ int btrfs_recover_relocation(struct btrfs_root *root) path = btrfs_alloc_path(); if (!path) return -ENOMEM; + path->reada = -1; key.objectid = BTRFS_TREE_RELOC_OBJECTID; key.type = BTRFS_ROOT_ITEM_KEY; -- cgit v1.2.3 From cca1c81f43e26ab60c0d1090fb90992358d69bdf Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 13 May 2011 11:07:12 -0400 Subject: Btrfs: don't try to allocate from a block group that doesn't have enough space If we have a very large filesystem, we can spend a lot of time in find_free_extent just trying to allocate from empty block groups. So instead check to see if the block group even has enough space for the allocation, and if not go on to the next block group. Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 1ba2cc58eab5..c8c318494dee 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5159,6 +5159,14 @@ have_block_group: if (unlikely(block_group->ro)) goto loop; + spin_lock(&block_group->tree_lock); + if (cached && + block_group->free_space < num_bytes + empty_size) { + spin_unlock(&block_group->tree_lock); + goto loop; + } + spin_unlock(&block_group->tree_lock); + /* * Ok we want to try and use the cluster allocator, so lets look * there, unless we are on LOOP_NO_EMPTY_SIZE, since we will -- cgit v1.2.3 From 207dde8289d9b005b665cb9d8d2bb9464256101d Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 13 May 2011 14:49:23 -0400 Subject: Btrfs: check for duplicate entries in the free space cache If there are duplicate entries in the free space cache, discard the entire cache and load it the old fashioned way. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/free-space-cache.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 63731a1fb0a1..d634a7e42207 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -420,7 +420,14 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, spin_lock(&block_group->tree_lock); ret = link_free_space(block_group, e); spin_unlock(&block_group->tree_lock); - BUG_ON(ret); + if (ret) { + printk(KERN_ERR "Duplicate entries in " + "free space cache, dumping\n"); + kunmap(page); + unlock_page(page); + page_cache_release(page); + goto free_cache; + } } else { e->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS); if (!e->bitmap) { @@ -437,6 +444,14 @@ int load_free_space_cache(struct btrfs_fs_info *fs_info, recalculate_thresholds(block_group); spin_unlock(&block_group->tree_lock); list_add_tail(&e->list, &bitmaps); + if (ret) { + printk(KERN_ERR "Duplicate entries in " + "free space cache, dumping\n"); + kunmap(page); + unlock_page(page); + page_cache_release(page); + goto free_cache; + } } num_entries--; @@ -909,10 +924,16 @@ static int tree_insert_offset(struct rb_root *root, u64 offset, * logically. */ if (bitmap) { - WARN_ON(info->bitmap); + if (info->bitmap) { + WARN_ON_ONCE(1); + return -EEXIST; + } p = &(*p)->rb_right; } else { - WARN_ON(!info->bitmap); + if (!info->bitmap) { + WARN_ON_ONCE(1); + return -EEXIST; + } p = &(*p)->rb_left; } } -- cgit v1.2.3 From d90c732122a1f6d0efe388a8a204f67f144b2eb3 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 17 May 2011 09:50:54 -0400 Subject: Btrfs: leave spinning on lookup and map the leaf On lookup we only want to read the inode item, so leave the path spinning. Also we're just wholesale reading the leaf off, so map the leaf so we don't do a bunch of kmap/kunmaps. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6228a304b547..dc8fb2b3a145 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2493,6 +2493,7 @@ static void btrfs_read_locked_inode(struct inode *inode) path = btrfs_alloc_path(); BUG_ON(!path); + path->leave_spinning = 1; memcpy(&location, &BTRFS_I(inode)->location, sizeof(location)); ret = btrfs_lookup_inode(NULL, root, path, &location, 0); @@ -2502,6 +2503,12 @@ static void btrfs_read_locked_inode(struct inode *inode) leaf = path->nodes[0]; inode_item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_inode_item); + if (!leaf->map_token) + map_private_extent_buffer(leaf, (unsigned long)inode_item, + sizeof(struct btrfs_inode_item), + &leaf->map_token, &leaf->kaddr, + &leaf->map_start, &leaf->map_len, + KM_USER1); inode->i_mode = btrfs_inode_mode(leaf, inode_item); inode->i_nlink = btrfs_inode_nlink(leaf, inode_item); @@ -2539,6 +2546,11 @@ static void btrfs_read_locked_inode(struct inode *inode) if (!maybe_acls) cache_no_acl(inode); + if (leaf->map_token) { + unmap_extent_buffer(leaf, leaf->map_token, KM_USER1); + leaf->map_token = NULL; + } + btrfs_free_path(path); inode_item = NULL; -- cgit v1.2.3 From 0956c798ef8dbe0fc215870eb68bd2d8e789f86a Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 18 May 2011 00:11:22 +0000 Subject: BTRFS: Remove unused node_lock 240f62c8756 replaced the node_lock with rcu_read_lock, but forgot to remove the actual lock in the data structure. Remove it here. Signed-off-by: Andi Kleen Signed-off-by: Chris Mason --- fs/btrfs/ctree.h | 3 --- fs/btrfs/disk-io.c | 1 - 2 files changed, 4 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8f4b81de3ae2..f290b98e2fe6 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1088,9 +1088,6 @@ struct btrfs_fs_info { struct btrfs_root { struct extent_buffer *node; - /* the node lock is held while changing the node pointer */ - spinlock_t node_lock; - struct extent_buffer *commit_root; struct btrfs_root *log_root; struct btrfs_root *reloc_root; diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 228cf36ece83..64b289690f9d 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1064,7 +1064,6 @@ static int __setup_root(u32 nodesize, u32 leafsize, u32 sectorsize, INIT_LIST_HEAD(&root->dirty_list); INIT_LIST_HEAD(&root->orphan_list); INIT_LIST_HEAD(&root->root_list); - spin_lock_init(&root->node_lock); spin_lock_init(&root->orphan_lock); spin_lock_init(&root->inode_lock); spin_lock_init(&root->accounting_lock); -- cgit v1.2.3 From e2156867159ae7b3bc38ef1c26ea0ee30a895ef8 Mon Sep 17 00:00:00 2001 From: Hugo Mills Date: Sat, 14 May 2011 17:43:41 +0000 Subject: btrfs: Ensure the tree search ioctl returns the right number of records Btrfs's tree search ioctl has a field to indicate that no more than a given number of records should be returned. The ioctl doesn't honour this, as the tested value is not incremented until the end of the copy_to_sk function. This patch removes an unnecessary local variable, and updates the num_found counter as each key is found in the tree. Signed-off-by: Hugo Mills Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 2616f7ed4799..ce773fb736a1 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1279,7 +1279,6 @@ static noinline int copy_to_sk(struct btrfs_root *root, int nritems; int i; int slot; - int found = 0; int ret = 0; leaf = path->nodes[0]; @@ -1326,7 +1325,7 @@ static noinline int copy_to_sk(struct btrfs_root *root, item_off, item_len); *sk_offset += item_len; } - found++; + (*num_found)++; if (*num_found >= sk->nr_items) break; @@ -1345,7 +1344,6 @@ advance_key: } else ret = 1; overflow: - *num_found += found; return ret; } -- cgit v1.2.3 From 0f3b708c11914b684d17fed975eed19db902a8de Mon Sep 17 00:00:00 2001 From: Jamey Sharp Date: Thu, 5 May 2011 19:03:46 +0000 Subject: btrfs: Delete unused version.sh script. In 2008, commit b4f6c45dfbf84f47c21f73f6370ad1292b0627fd dropped the use of fs/btrfs/version.sh, but left the script behind. Kill it. Commit by Jamey Sharp and Josh Triplett. Signed-off-by: Jamey Sharp Signed-off-by: Josh Triplett Cc: Chris Mason Signed-off-by: Chris Mason --- fs/btrfs/version.sh | 43 ------------------------------------------- 1 file changed, 43 deletions(-) delete mode 100644 fs/btrfs/version.sh diff --git a/fs/btrfs/version.sh b/fs/btrfs/version.sh deleted file mode 100644 index 1ca1952fd917..000000000000 --- a/fs/btrfs/version.sh +++ /dev/null @@ -1,43 +0,0 @@ -#!/bin/bash -# -# determine-version -- report a useful version for releases -# -# Copyright 2008, Aron Griffis -# Copyright 2008, Oracle -# Released under the GNU GPLv2 - -v="v0.16" - -which git &> /dev/null -if [ $? == 0 ]; then - git branch >& /dev/null - if [ $? == 0 ]; then - if head=`git rev-parse --verify HEAD 2>/dev/null`; then - if tag=`git describe --tags 2>/dev/null`; then - v="$tag" - fi - - # Are there uncommitted changes? - git update-index --refresh --unmerged > /dev/null - if git diff-index --name-only HEAD | \ - grep -v "^scripts/package" \ - | read dummy; then - v="$v"-dirty - fi - fi - fi -fi - -echo "#ifndef __BUILD_VERSION" > .build-version.h -echo "#define __BUILD_VERSION" >> .build-version.h -echo "#define BTRFS_BUILD_VERSION \"Btrfs $v\"" >> .build-version.h -echo "#endif" >> .build-version.h - -diff -q version.h .build-version.h >& /dev/null - -if [ $? == 0 ]; then - rm .build-version.h - exit 0 -fi - -mv .build-version.h version.h -- cgit v1.2.3 From c4f675cd40d955d539180506c09515c90169b15b Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Fri, 20 May 2011 20:20:30 +0000 Subject: btrfs: don't spin in shrink_delalloc if there is nothing to free Observed as a large delay when --mixed filesystem is filled up. Test example: 1. create tiny --mixed FS: $ dd if=/dev/zero of=2G.img seek=$((2048 * 1024 * 1024 - 1)) count=1 bs=1 $ mkfs.btrfs --mixed 2G.img $ mount -oloop 2G.img /mnt/ut/ 2. Try to fill it up: $ dd if=/dev/urandom of=10M.file bs=10240 count=1024 $ seq 1 256 | while read file_no; do echo $file_no; time cp 10M.file ${file_no}.copy; done Up to '200.copy' it goes fast, but when disk fills-up each -ENOSPC message takes 3 seconds to pop-up _every_ ENOSPC (and in usermode linux it's even more: 30-60 seconds!). (Maybe, time depends on kernel's timer resolution). No IO, no CPU load, just rescheduling. Some debugging revealed busy spinning in shrink_delalloc. Signed-off-by: Sergei Trofimovich Reviewed-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 9ee6bd55e16c..9f5fdd37451d 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3425,6 +3425,10 @@ static int shrink_delalloc(struct btrfs_trans_handle *trans, if (reserved == 0) return 0; + /* nothing to shrink - nothing to reclaim */ + if (root->fs_info->delalloc_bytes == 0) + return 0; + max_reclaim = min(reserved, to_reclaim); while (loops < 1024) { -- cgit v1.2.3 From 9694b3fcbb0f5dd498fdf53c82f22fcc37989152 Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Fri, 20 May 2011 20:20:31 +0000 Subject: btrfs: typo: 'btrfS' -> 'btrfs' Signed-off-by: Sergei Trofimovich Signed-off-by: Chris Mason --- fs/btrfs/dir-item.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c index c62f02f6ae69..dec93485d539 100644 --- a/fs/btrfs/dir-item.c +++ b/fs/btrfs/dir-item.c @@ -452,7 +452,7 @@ int verify_dir_item(struct btrfs_root *root, namelen = XATTR_NAME_MAX; if (btrfs_dir_name_len(leaf, dir_item) > namelen) { - printk(KERN_CRIT "btrfS: invalid dir item name len: %u\n", + printk(KERN_CRIT "btrfs: invalid dir item name len: %u\n", (unsigned)btrfs_dir_data_len(leaf, dir_item)); return 1; } -- cgit v1.2.3 From 27160b6b5a1744b6eaa8416e2b901ec937b1eee0 Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Fri, 20 May 2011 20:20:32 +0000 Subject: btrfs: fix typo 'testeing' -> 'testing' Signed-off-by: Sergei Trofimovich Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 7cd8ab0ef04d..72650ceb9829 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1310,7 +1310,7 @@ static int btrfs_set_bit_hook(struct inode *inode, /* * set_bit and clear bit hooks normally require _irqsave/restore - * but in this case, we are only testeing for the DELALLOC + * but in this case, we are only testing for the DELALLOC * bit, which is only set or cleared with irqs on */ if (!(state->state & EXTENT_DELALLOC) && (*bits & EXTENT_DELALLOC)) { @@ -1344,7 +1344,7 @@ static int btrfs_clear_bit_hook(struct inode *inode, { /* * set_bit and clear bit hooks normally require _irqsave/restore - * but in this case, we are only testeing for the DELALLOC + * but in this case, we are only testing for the DELALLOC * bit, which is only set or cleared with irqs on */ if ((state->state & EXTENT_DELALLOC) && (*bits & EXTENT_DELALLOC)) { -- cgit v1.2.3 From b0b802d7e34b0b4a78f911c3a8aad88aa91fd7ab Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Thu, 19 May 2011 07:03:42 +0000 Subject: Btrfs: return error code to caller when btrfs_previous_item fails The error code is returned instead of calling BUG_ON when btrfs_previous_item returns the error. Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index c7367ae5a3e6..e40cdd5b4669 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -949,14 +949,14 @@ static int btrfs_free_dev_extent(struct btrfs_trans_handle *trans, if (ret > 0) { ret = btrfs_previous_item(root, path, key.objectid, BTRFS_DEV_EXTENT_KEY); - BUG_ON(ret); + if (ret) + goto out; leaf = path->nodes[0]; btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]); extent = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_dev_extent); BUG_ON(found_key.offset > start || found_key.offset + btrfs_dev_extent_length(leaf, extent) < start); - ret = 0; } else if (ret == 0) { leaf = path->nodes[0]; extent = btrfs_item_ptr(leaf, path->slots[0], @@ -969,6 +969,7 @@ static int btrfs_free_dev_extent(struct btrfs_trans_handle *trans, ret = btrfs_del_item(trans, root, path); BUG_ON(ret); +out: btrfs_free_path(path); return ret; } -- cgit v1.2.3 From 65a246c5ffe3b487a001de025816326939e63362 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Thu, 19 May 2011 04:37:44 +0000 Subject: Btrfs: return error code to caller when btrfs_del_item fails The error code is returned instead of calling BUG_ON when btrfs_del_item returns the error. Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/file-item.c | 10 ++++++---- fs/btrfs/root-tree.c | 6 +++++- fs/btrfs/tree-log.c | 10 +++++++--- fs/btrfs/volumes.c | 4 +--- 4 files changed, 19 insertions(+), 11 deletions(-) diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index a6a9d4e8b491..6e7556aa02e8 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -551,10 +551,10 @@ int btrfs_del_csums(struct btrfs_trans_handle *trans, ret = btrfs_search_slot(trans, root, &key, path, -1, 1); if (ret > 0) { if (path->slots[0] == 0) - goto out; + break; path->slots[0]--; } else if (ret < 0) { - goto out; + break; } leaf = path->nodes[0]; @@ -579,7 +579,8 @@ int btrfs_del_csums(struct btrfs_trans_handle *trans, /* delete the entire item, it is inside our range */ if (key.offset >= bytenr && csum_end <= end_byte) { ret = btrfs_del_item(trans, root, path); - BUG_ON(ret); + if (ret) + goto out; if (key.offset == bytenr) break; } else if (key.offset < bytenr && csum_end > end_byte) { @@ -633,9 +634,10 @@ int btrfs_del_csums(struct btrfs_trans_handle *trans, } btrfs_release_path(root, path); } + ret = 0; out: btrfs_free_path(path); - return 0; + return ret; } int btrfs_csum_file_blocks(struct btrfs_trans_handle *trans, diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 6928bff62daa..2cf5f5142159 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -385,7 +385,10 @@ again: *sequence = btrfs_root_ref_sequence(leaf, ref); ret = btrfs_del_item(trans, tree_root, path); - BUG_ON(ret); + if (ret) { + err = ret; + goto out; + } } else err = -ENOENT; @@ -397,6 +400,7 @@ again: goto again; } +out: btrfs_free_path(path); return err; } diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index f997ec0c1ba4..cf2baeb70462 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -1050,7 +1050,8 @@ static noinline int fixup_inode_link_counts(struct btrfs_trans_handle *trans, break; ret = btrfs_del_item(trans, root, path); - BUG_ON(ret); + if (ret) + goto out; btrfs_release_path(root, path); inode = read_one_inode(root, key.offset); @@ -1068,8 +1069,10 @@ static noinline int fixup_inode_link_counts(struct btrfs_trans_handle *trans, */ key.offset = (u64)-1; } + ret = 0; +out: btrfs_release_path(root, path); - return 0; + return ret; } @@ -2587,7 +2590,8 @@ static int drop_objectid_items(struct btrfs_trans_handle *trans, break; ret = btrfs_del_item(trans, log, path); - BUG_ON(ret); + if (ret) + break; btrfs_release_path(log, path); } btrfs_release_path(log, path); diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index e40cdd5b4669..deca1a0326ad 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -967,7 +967,6 @@ static int btrfs_free_dev_extent(struct btrfs_trans_handle *trans, if (device->bytes_used > 0) device->bytes_used -= btrfs_dev_extent_length(leaf, extent); ret = btrfs_del_item(trans, root, path); - BUG_ON(ret); out: btrfs_free_path(path); @@ -1770,10 +1769,9 @@ static int btrfs_free_chunk(struct btrfs_trans_handle *trans, BUG_ON(ret); ret = btrfs_del_item(trans, root, path); - BUG_ON(ret); btrfs_free_path(path); - return 0; + return ret; } static int btrfs_del_sys_chunk(struct btrfs_root *root, u64 chunk_objectid, u64 -- cgit v1.2.3 From 1cd307990d6e2b4965620e339a92e0d7ae853e13 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Thu, 19 May 2011 05:19:08 +0000 Subject: Btrfs: BUG_ON is deleted from the caller of btrfs_truncate_item & btrfs_extend_item Currently, btrfs_truncate_item and btrfs_extend_item returns only 0. So, the check by BUG_ON in the caller is unnecessary. Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/ctree.c | 8 ++------ fs/btrfs/dir-item.c | 1 - fs/btrfs/extent-tree.c | 3 --- fs/btrfs/file-item.c | 3 --- fs/btrfs/inode-item.c | 2 -- fs/btrfs/inode.c | 1 - fs/btrfs/tree-log.c | 1 - 7 files changed, 2 insertions(+), 17 deletions(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 84d7ca1fe0ba..6f1a59cc41ff 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -3216,7 +3216,6 @@ int btrfs_truncate_item(struct btrfs_trans_handle *trans, struct btrfs_path *path, u32 new_size, int from_end) { - int ret = 0; int slot; struct extent_buffer *leaf; struct btrfs_item *item; @@ -3314,12 +3313,11 @@ int btrfs_truncate_item(struct btrfs_trans_handle *trans, btrfs_set_item_size(leaf, item, new_size); btrfs_mark_buffer_dirty(leaf); - ret = 0; if (btrfs_leaf_free_space(root, leaf) < 0) { btrfs_print_leaf(root, leaf); BUG(); } - return ret; + return 0; } /* @@ -3329,7 +3327,6 @@ int btrfs_extend_item(struct btrfs_trans_handle *trans, struct btrfs_root *root, struct btrfs_path *path, u32 data_size) { - int ret = 0; int slot; struct extent_buffer *leaf; struct btrfs_item *item; @@ -3394,12 +3391,11 @@ int btrfs_extend_item(struct btrfs_trans_handle *trans, btrfs_set_item_size(leaf, item, old_size + data_size); btrfs_mark_buffer_dirty(leaf); - ret = 0; if (btrfs_leaf_free_space(root, leaf) < 0) { btrfs_print_leaf(root, leaf); BUG(); } - return ret; + return 0; } /* diff --git a/fs/btrfs/dir-item.c b/fs/btrfs/dir-item.c index dec93485d539..dd421c48c353 100644 --- a/fs/btrfs/dir-item.c +++ b/fs/btrfs/dir-item.c @@ -50,7 +50,6 @@ static struct btrfs_dir_item *insert_with_overflow(struct btrfs_trans_handle if (di) return ERR_PTR(-EEXIST); ret = btrfs_extend_item(trans, root, path, data_size); - WARN_ON(ret > 0); } if (ret < 0) return ERR_PTR(ret); diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 9f5fdd37451d..103e141afeb3 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -947,7 +947,6 @@ static int convert_extent_item_v0(struct btrfs_trans_handle *trans, BUG_ON(ret); ret = btrfs_extend_item(trans, root, path, new_size); - BUG_ON(ret); leaf = path->nodes[0]; item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item); @@ -1555,7 +1554,6 @@ int setup_inline_extent_backref(struct btrfs_trans_handle *trans, size = btrfs_extent_inline_ref_size(type); ret = btrfs_extend_item(trans, root, path, size); - BUG_ON(ret); ei = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_extent_item); refs = btrfs_extent_refs(leaf, ei); @@ -1684,7 +1682,6 @@ int update_inline_extent_backref(struct btrfs_trans_handle *trans, end - ptr - size); item_size -= size; ret = btrfs_truncate_item(trans, root, path, item_size, 1); - BUG_ON(ret); } btrfs_mark_buffer_dirty(leaf); return 0; diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index 6e7556aa02e8..fb9b02667e75 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -495,7 +495,6 @@ static noinline int truncate_one_csum(struct btrfs_trans_handle *trans, u32 new_size = (bytenr - key->offset) >> blocksize_bits; new_size *= csum_size; ret = btrfs_truncate_item(trans, root, path, new_size, 1); - BUG_ON(ret); } else if (key->offset >= bytenr && csum_end > end_byte && end_byte > key->offset) { /* @@ -508,7 +507,6 @@ static noinline int truncate_one_csum(struct btrfs_trans_handle *trans, new_size *= csum_size; ret = btrfs_truncate_item(trans, root, path, new_size, 0); - BUG_ON(ret); key->offset = end_byte; ret = btrfs_set_item_key_safe(trans, root, path, key); @@ -763,7 +761,6 @@ again: goto insert; ret = btrfs_extend_item(trans, root, path, diff); - BUG_ON(ret); goto csum; } diff --git a/fs/btrfs/inode-item.c b/fs/btrfs/inode-item.c index 64f1150bb48d..baa74f3db691 100644 --- a/fs/btrfs/inode-item.c +++ b/fs/btrfs/inode-item.c @@ -130,7 +130,6 @@ int btrfs_del_inode_ref(struct btrfs_trans_handle *trans, item_size - (ptr + sub_item_len - item_start)); ret = btrfs_truncate_item(trans, root, path, item_size - sub_item_len, 1); - BUG_ON(ret); out: btrfs_free_path(path); return ret; @@ -167,7 +166,6 @@ int btrfs_insert_inode_ref(struct btrfs_trans_handle *trans, old_size = btrfs_item_size_nr(path->nodes[0], path->slots[0]); ret = btrfs_extend_item(trans, root, path, ins_len); - BUG_ON(ret); ref = btrfs_item_ptr(path->nodes[0], path->slots[0], struct btrfs_inode_ref); ref = (struct btrfs_inode_ref *)((unsigned long)ref + old_size); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 72650ceb9829..e9e2b4778279 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3428,7 +3428,6 @@ search_again: btrfs_file_extent_calc_inline_size(size); ret = btrfs_truncate_item(trans, root, path, size, 1); - BUG_ON(ret); } else if (root->ref_cows) { inode_sub_bytes(inode, item_end + 1 - found_key.offset); diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index cf2baeb70462..0350147106d5 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -382,7 +382,6 @@ insert: } else if (found_size < item_size) { ret = btrfs_extend_item(trans, root, path, item_size - found_size); - BUG_ON(ret); } } else if (ret) { return ret; -- cgit v1.2.3 From c00e9493f1412621c8665a707d63e32b0768f572 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Thu, 28 Apr 2011 09:10:23 +0000 Subject: Btrfs: return error to caller if read_one_inode() fails When read_one_inode() fails, error code is returned to caller instead of BUG_ON(). Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/tree-log.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 0350147106d5..46b7b57650ab 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -677,7 +677,10 @@ static noinline int drop_one_dir_item(struct btrfs_trans_handle *trans, btrfs_release_path(root, path); inode = read_one_inode(root, location.objectid); - BUG_ON(!inode); + if (!inode) { + kfree(name); + return -EIO; + } ret = link_to_fixup_dir(trans, root, path, location.objectid); BUG_ON(ret); @@ -816,7 +819,10 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans, return -ENOENT; inode = read_one_inode(root, key->objectid); - BUG_ON(!inode); + if (!inode) { + iput(dir); + return -EIO; + } ref_ptr = btrfs_item_ptr_offset(eb, slot); ref_end = ref_ptr + btrfs_item_size_nr(eb, slot); @@ -1054,7 +1060,8 @@ static noinline int fixup_inode_link_counts(struct btrfs_trans_handle *trans, btrfs_release_path(root, path); inode = read_one_inode(root, key.offset); - BUG_ON(!inode); + if (!inode) + return -EIO; ret = fixup_inode_link_count(trans, root, inode); BUG_ON(ret); @@ -1090,7 +1097,8 @@ static noinline int link_to_fixup_dir(struct btrfs_trans_handle *trans, struct inode *inode; inode = read_one_inode(root, objectid); - BUG_ON(!inode); + if (!inode) + return -EIO; key.objectid = BTRFS_TREE_LOG_FIXUP_OBJECTID; btrfs_set_key_type(&key, BTRFS_ORPHAN_ITEM_KEY); @@ -1177,7 +1185,8 @@ static noinline int replay_one_name(struct btrfs_trans_handle *trans, int ret; dir = read_one_inode(root, key->objectid); - BUG_ON(!dir); + if (!dir) + return -EIO; name_len = btrfs_dir_name_len(eb, di); name = kmalloc(name_len, GFP_NOFS); @@ -1433,7 +1442,10 @@ again: btrfs_release_path(root, path); btrfs_release_path(log, log_path); inode = read_one_inode(root, location.objectid); - BUG_ON(!inode); + if (!inode) { + kfree(name); + return -EIO; + } ret = link_to_fixup_dir(trans, root, path, location.objectid); -- cgit v1.2.3 From 37daa4f968e9470ae9f30e246a5781717c598271 Mon Sep 17 00:00:00 2001 From: Tsutomu Itoh Date: Thu, 28 Apr 2011 09:18:21 +0000 Subject: Btrfs: check return value of btrfs_inc_extent_ref() If return value of btrfs_inc_extent_ref() is not 0, BUG() is called. Signed-off-by: Tsutomu Itoh Signed-off-by: Chris Mason --- fs/btrfs/tree-log.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index 46b7b57650ab..c2d887566400 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -589,6 +589,7 @@ static noinline int replay_one_extent(struct btrfs_trans_handle *trans, ins.objectid, ins.offset, 0, root->root_key.objectid, key->objectid, offset); + BUG_ON(ret); } else { /* * insert the extent pointer in the extent -- cgit v1.2.3 From b083916638eee513be501f53b42a4be0b9851db0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 14 May 2011 07:10:51 +0000 Subject: fs/btrfs: Add missing btrfs_free_path Btrfs_alloc_path should be matched with btrfs_free_path in error-handling code. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @r exists@ local idexpression struct btrfs_path * x; expression ra,rb; position p1,p2; @@ x = btrfs_alloc_path@p1(...) ... when != btrfs_free_path(x,...) when != if (...) { ... btrfs_free_path(x,...) ...} when != x = ra if(...) { ... when != x = rb when forall when != btrfs_free_path(x,...) \(return <+...x...+>; \| return@p2...; \) } @script:python@ p1 << r.p1; p2 << r.p2; @@ cocci.print_main("alloc",p1) cocci.print_secs("return",p2) // Signed-off-by: Julia Lawall Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 1 + fs/btrfs/super.c | 4 +++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index e9e2b4778279..80fcd5177731 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7314,6 +7314,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, datasize); if (err) { drop_inode = 1; + btrfs_free_path(path); goto out_unlock; } leaf = path->nodes[0]; diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 0ac712efcdf2..46d7eed7e965 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -506,8 +506,10 @@ static struct dentry *get_default_root(struct super_block *sb, */ dir_id = btrfs_super_root_dir(&root->fs_info->super_copy); di = btrfs_lookup_dir_item(NULL, root, path, dir_id, "default", 7, 0); - if (IS_ERR(di)) + if (IS_ERR(di)) { + btrfs_free_path(path); return ERR_CAST(di); + } if (!di) { /* * Ok the default dir item isn't there. This is weird since -- cgit v1.2.3 From 8233767a227ac5843f1023b88c7272a7b5058f5f Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Wed, 20 Apr 2011 06:44:57 +0000 Subject: Btrfs: allocate extent state and check the result properly It doesn't allocate extent_state and check the result properly: - in set_extent_bit, it doesn't allocate extent_state if the path is not allowed wait - in clear_extent_bit, it doesn't check the result after atomic-ly allocate, we trigger BUG_ON() if it's fail - if allocate fail, we trigger BUG_ON instead of returning -ENOMEM since the return value of clear_extent_bit() is ignored by many callers Signed-off-by: Xiao Guangrong Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 34 ++++++++++++++++++++++++++-------- 1 file changed, 26 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index ba41da59e31b..9ccea86dd015 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -439,6 +439,15 @@ static int clear_state_bit(struct extent_io_tree *tree, return ret; } +static struct extent_state * +alloc_extent_state_atomic(struct extent_state *prealloc) +{ + if (!prealloc) + prealloc = alloc_extent_state(GFP_ATOMIC); + + return prealloc; +} + /* * clear some bits on a range in the tree. This may require splitting * or inserting elements in the tree, so the gfp mask is used to @@ -476,8 +485,7 @@ int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end, again: if (!prealloc && (mask & __GFP_WAIT)) { prealloc = alloc_extent_state(mask); - if (!prealloc) - return -ENOMEM; + BUG_ON(!prealloc); } spin_lock(&tree->lock); @@ -529,8 +537,8 @@ hit_next: */ if (state->start < start) { - if (!prealloc) - prealloc = alloc_extent_state(GFP_ATOMIC); + prealloc = alloc_extent_state_atomic(prealloc); + BUG_ON(!prealloc); err = split_state(tree, state, prealloc, start); BUG_ON(err == -EEXIST); prealloc = NULL; @@ -551,8 +559,8 @@ hit_next: * on the first half */ if (state->start <= end && state->end > end) { - if (!prealloc) - prealloc = alloc_extent_state(GFP_ATOMIC); + prealloc = alloc_extent_state_atomic(prealloc); + BUG_ON(!prealloc); err = split_state(tree, state, prealloc, end + 1); BUG_ON(err == -EEXIST); if (wake) @@ -725,8 +733,7 @@ int set_extent_bit(struct extent_io_tree *tree, u64 start, u64 end, again: if (!prealloc && (mask & __GFP_WAIT)) { prealloc = alloc_extent_state(mask); - if (!prealloc) - return -ENOMEM; + BUG_ON(!prealloc); } spin_lock(&tree->lock); @@ -743,6 +750,8 @@ again: */ node = tree_search(tree, start); if (!node) { + prealloc = alloc_extent_state_atomic(prealloc); + BUG_ON(!prealloc); err = insert_state(tree, prealloc, start, end, &bits); prealloc = NULL; BUG_ON(err == -EEXIST); @@ -811,6 +820,9 @@ hit_next: err = -EEXIST; goto out; } + + prealloc = alloc_extent_state_atomic(prealloc); + BUG_ON(!prealloc); err = split_state(tree, state, prealloc, start); BUG_ON(err == -EEXIST); prealloc = NULL; @@ -841,6 +853,9 @@ hit_next: this_end = end; else this_end = last_start - 1; + + prealloc = alloc_extent_state_atomic(prealloc); + BUG_ON(!prealloc); err = insert_state(tree, prealloc, start, this_end, &bits); BUG_ON(err == -EEXIST); @@ -865,6 +880,9 @@ hit_next: err = -EEXIST; goto out; } + + prealloc = alloc_extent_state_atomic(prealloc); + BUG_ON(!prealloc); err = split_state(tree, state, prealloc, end + 1); BUG_ON(err == -EEXIST); -- cgit v1.2.3 From c7f895a2b2d1a002810d52e7b6653c9dc2fd0b0b Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Wed, 20 Apr 2011 06:45:49 +0000 Subject: Btrfs: fix unsafe usage of merge_state merge_state can free the current state if it can be merged with the next node, but in set_extent_bit(), after merge_state, we still use the current extent to get the next node and cache it into cached_state Signed-off-by: Xiao Guangrong Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 9ccea86dd015..ebfff5b44752 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -780,20 +780,18 @@ hit_next: if (err) goto out; + next_node = rb_next(node); cache_state(state, cached_state); merge_state(tree, state); if (last_end == (u64)-1) goto out; start = last_end + 1; - if (start < end && prealloc && !need_resched()) { - next_node = rb_next(node); - if (next_node) { - state = rb_entry(next_node, struct extent_state, - rb_node); - if (state->start == start) - goto hit_next; - } + if (next_node && start < end && prealloc && !need_resched()) { + state = rb_entry(next_node, struct extent_state, + rb_node); + if (state->start == start) + goto hit_next; } goto search_again; } @@ -856,14 +854,22 @@ hit_next: prealloc = alloc_extent_state_atomic(prealloc); BUG_ON(!prealloc); + + /* + * Avoid to free 'prealloc' if it can be merged with + * the later extent. + */ + atomic_inc(&prealloc->refs); err = insert_state(tree, prealloc, start, this_end, &bits); BUG_ON(err == -EEXIST); if (err) { + free_extent_state(prealloc); prealloc = NULL; goto out; } cache_state(prealloc, cached_state); + free_extent_state(prealloc); prealloc = NULL; start = this_end + 1; goto search_again; -- cgit v1.2.3 From 4f6c9328c6c0d8558907f16579a9d47815abef80 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Wed, 20 Apr 2011 10:06:40 +0000 Subject: Btrfs: fix bh leak on __btrfs_open_devices path 'bh' is forgot to release if no error is detected Signed-off-by: Xiao Guangrong Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index deca1a0326ad..290100fc47be 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -597,6 +597,7 @@ static int __btrfs_open_devices(struct btrfs_fs_devices *fs_devices, list_add(&device->dev_alloc_list, &fs_devices->alloc_list); } + brelse(bh); continue; error_brelse: -- cgit v1.2.3 From c9513edb0079f97749c2ac00c887a22c4ba44792 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Wed, 20 Apr 2011 10:07:30 +0000 Subject: Btrfs: fix the race between reading and updating devices On btrfs_congested_fn and __unplug_io_fn paths, we should hold device_list_mutex to avoid remove/add device path to update fs_devices->devices On __btrfs_close_devices and btrfs_prepare_sprout paths, the devices in fs_devices->devices or fs_devices->devices is updated, so we should hold the mutex to avoid the reader side to reach them Signed-off-by: Xiao Guangrong Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 2 ++ fs/btrfs/volumes.c | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 64b289690f9d..4e53a4fc467f 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1410,6 +1410,7 @@ static int btrfs_congested_fn(void *congested_data, int bdi_bits) struct btrfs_device *device; struct backing_dev_info *bdi; + mutex_lock(&info->fs_devices->device_list_mutex); list_for_each_entry(device, &info->fs_devices->devices, dev_list) { if (!device->bdev) continue; @@ -1419,6 +1420,7 @@ static int btrfs_congested_fn(void *congested_data, int bdi_bits) break; } } + mutex_unlock(&info->fs_devices->device_list_mutex); return ret; } diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 290100fc47be..43c4f09e441c 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -481,6 +481,7 @@ static int __btrfs_close_devices(struct btrfs_fs_devices *fs_devices) if (--fs_devices->opened > 0) return 0; + mutex_lock(&fs_devices->device_list_mutex); list_for_each_entry(device, &fs_devices->devices, dev_list) { if (device->bdev) { blkdev_put(device->bdev, device->mode); @@ -495,6 +496,8 @@ static int __btrfs_close_devices(struct btrfs_fs_devices *fs_devices) device->writeable = 0; device->in_fs_metadata = 0; } + mutex_unlock(&fs_devices->device_list_mutex); + WARN_ON(fs_devices->open_devices); WARN_ON(fs_devices->rw_devices); fs_devices->opened = 0; @@ -1415,7 +1418,11 @@ static int btrfs_prepare_sprout(struct btrfs_trans_handle *trans, INIT_LIST_HEAD(&seed_devices->devices); INIT_LIST_HEAD(&seed_devices->alloc_list); mutex_init(&seed_devices->device_list_mutex); + + mutex_lock(&root->fs_info->fs_devices->device_list_mutex); list_splice_init(&fs_devices->devices, &seed_devices->devices); + mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); + list_splice_init(&fs_devices->alloc_list, &seed_devices->alloc_list); list_for_each_entry(device, &seed_devices->devices, dev_list) { device->fs_devices = seed_devices; -- cgit v1.2.3 From 0c1daee085cff1395d1eba4ad6faff7810a594d8 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Wed, 20 Apr 2011 10:08:16 +0000 Subject: Btrfs: fix the race between remove dev and alloc chunk On remove device path, it updates device->dev_alloc_list but does not hold chunk lock Signed-off-by: Xiao Guangrong Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 43c4f09e441c..ee197ec28547 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1291,7 +1291,9 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) } if (device->writeable) { + lock_chunks(root); list_del_init(&device->dev_alloc_list); + unlock_chunks(root); root->fs_info->fs_devices->rw_devices--; } @@ -1345,7 +1347,9 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) } fs_devices->seed = device->fs_devices->seed; device->fs_devices->seed = NULL; + lock_chunks(root); __btrfs_close_devices(device->fs_devices); + unlock_chunks(root); free_fs_devices(device->fs_devices); } @@ -1377,8 +1381,10 @@ out: return ret; error_undo: if (device->writeable) { + lock_chunks(root); list_add(&device->dev_alloc_list, &root->fs_info->fs_devices->alloc_list); + unlock_chunks(root); root->fs_info->fs_devices->rw_devices++; } goto error_brelse; -- cgit v1.2.3 From 46224705656633466ca7dc71d81b3c0abc76cae4 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Wed, 20 Apr 2011 10:08:47 +0000 Subject: Btrfs: drop unnecessary device lock Drop device_list_mutex for the reader side on clone_fs_devices and btrfs_rm_device pathes since the fs_info->volume_mutex can ensure the device list is not updated btrfs_close_extra_devices is the initialized path, we can not add or remove device at this time, so we can simply drop the mutex safely, like other initialized function does(add_missing_dev, __find_device, __btrfs_open_devices ...). Signed-off-by: Xiao Guangrong Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index ee197ec28547..0b5ca2737268 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -406,7 +406,7 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig) fs_devices->latest_trans = orig->latest_trans; memcpy(fs_devices->fsid, orig->fsid, sizeof(fs_devices->fsid)); - mutex_lock(&orig->device_list_mutex); + /* We have held the volume lock, it is safe to get the devices. */ list_for_each_entry(orig_dev, &orig->devices, dev_list) { device = kzalloc(sizeof(*device), GFP_NOFS); if (!device) @@ -429,10 +429,8 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig) device->fs_devices = fs_devices; fs_devices->num_devices++; } - mutex_unlock(&orig->device_list_mutex); return fs_devices; error: - mutex_unlock(&orig->device_list_mutex); free_fs_devices(fs_devices); return ERR_PTR(-ENOMEM); } @@ -443,7 +441,7 @@ int btrfs_close_extra_devices(struct btrfs_fs_devices *fs_devices) mutex_lock(&uuid_mutex); again: - mutex_lock(&fs_devices->device_list_mutex); + /* This is the initialized path, it is safe to release the devices. */ list_for_each_entry_safe(device, next, &fs_devices->devices, dev_list) { if (device->in_fs_metadata) continue; @@ -463,7 +461,6 @@ again: kfree(device->name); kfree(device); } - mutex_unlock(&fs_devices->device_list_mutex); if (fs_devices->seed) { fs_devices = fs_devices->seed; @@ -1242,14 +1239,16 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) device = NULL; devices = &root->fs_info->fs_devices->devices; - mutex_lock(&root->fs_info->fs_devices->device_list_mutex); + /* + * It is safe to read the devices since the volume_mutex + * is held. + */ list_for_each_entry(tmp, devices, dev_list) { if (tmp->in_fs_metadata && !tmp->bdev) { device = tmp; break; } } - mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); bdev = NULL; bh = NULL; disk_super = NULL; -- cgit v1.2.3 From 1f78160ce1b1b8e657e2248118c4d91f881763f0 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Wed, 20 Apr 2011 10:09:16 +0000 Subject: Btrfs: using rcu lock in the reader side of devices list fs_devices->devices is only updated on remove and add device paths, so we can use rcu to protect it in the reader side Signed-off-by: Xiao Guangrong Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 14 ++++----- fs/btrfs/ioctl.c | 7 +++-- fs/btrfs/volumes.c | 85 +++++++++++++++++++++++++++++++++++++----------------- fs/btrfs/volumes.h | 2 ++ 4 files changed, 72 insertions(+), 36 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 4e53a4fc467f..deba3d9c8853 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1410,8 +1410,8 @@ static int btrfs_congested_fn(void *congested_data, int bdi_bits) struct btrfs_device *device; struct backing_dev_info *bdi; - mutex_lock(&info->fs_devices->device_list_mutex); - list_for_each_entry(device, &info->fs_devices->devices, dev_list) { + rcu_read_lock(); + list_for_each_entry_rcu(device, &info->fs_devices->devices, dev_list) { if (!device->bdev) continue; bdi = blk_get_backing_dev_info(device->bdev); @@ -1420,7 +1420,7 @@ static int btrfs_congested_fn(void *congested_data, int bdi_bits) break; } } - mutex_unlock(&info->fs_devices->device_list_mutex); + rcu_read_unlock(); return ret; } @@ -2332,9 +2332,9 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors) sb = &root->fs_info->super_for_commit; dev_item = &sb->dev_item; - mutex_lock(&root->fs_info->fs_devices->device_list_mutex); + rcu_read_lock(); head = &root->fs_info->fs_devices->devices; - list_for_each_entry(dev, head, dev_list) { + list_for_each_entry_rcu(dev, head, dev_list) { if (!dev->bdev) { total_errors++; continue; @@ -2367,7 +2367,7 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors) } total_errors = 0; - list_for_each_entry(dev, head, dev_list) { + list_for_each_entry_rcu(dev, head, dev_list) { if (!dev->bdev) continue; if (!dev->in_fs_metadata || !dev->writeable) @@ -2377,7 +2377,7 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors) if (ret) total_errors++; } - mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); + rcu_read_unlock(); if (total_errors > max_errors) { printk(KERN_ERR "btrfs: %d errors while writing supers\n", total_errors); diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index ce773fb736a1..0de71feb8e1c 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -281,8 +281,9 @@ static noinline int btrfs_ioctl_fitrim(struct file *file, void __user *arg) if (!capable(CAP_SYS_ADMIN)) return -EPERM; - mutex_lock(&fs_info->fs_devices->device_list_mutex); - list_for_each_entry(device, &fs_info->fs_devices->devices, dev_list) { + rcu_read_lock(); + list_for_each_entry_rcu(device, &fs_info->fs_devices->devices, + dev_list) { if (!device->bdev) continue; q = bdev_get_queue(device->bdev); @@ -292,7 +293,7 @@ static noinline int btrfs_ioctl_fitrim(struct file *file, void __user *arg) minlen); } } - mutex_unlock(&fs_info->fs_devices->device_list_mutex); + rcu_read_unlock(); if (!num_devices) return -EOPNOTSUPP; diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 0b5ca2737268..e7844f8a347a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -363,7 +363,7 @@ static noinline int device_list_add(const char *path, INIT_LIST_HEAD(&device->dev_alloc_list); mutex_lock(&fs_devices->device_list_mutex); - list_add(&device->dev_list, &fs_devices->devices); + list_add_rcu(&device->dev_list, &fs_devices->devices); mutex_unlock(&fs_devices->device_list_mutex); device->fs_devices = fs_devices; @@ -471,6 +471,29 @@ again: return 0; } +static void __free_device(struct work_struct *work) +{ + struct btrfs_device *device; + + device = container_of(work, struct btrfs_device, rcu_work); + + if (device->bdev) + blkdev_put(device->bdev, device->mode); + + kfree(device->name); + kfree(device); +} + +static void free_device(struct rcu_head *head) +{ + struct btrfs_device *device; + + device = container_of(head, struct btrfs_device, rcu); + + INIT_WORK(&device->rcu_work, __free_device); + schedule_work(&device->rcu_work); +} + static int __btrfs_close_devices(struct btrfs_fs_devices *fs_devices) { struct btrfs_device *device; @@ -480,18 +503,27 @@ static int __btrfs_close_devices(struct btrfs_fs_devices *fs_devices) mutex_lock(&fs_devices->device_list_mutex); list_for_each_entry(device, &fs_devices->devices, dev_list) { - if (device->bdev) { - blkdev_put(device->bdev, device->mode); + struct btrfs_device *new_device; + + if (device->bdev) fs_devices->open_devices--; - } + if (device->writeable) { list_del_init(&device->dev_alloc_list); fs_devices->rw_devices--; } - device->bdev = NULL; - device->writeable = 0; - device->in_fs_metadata = 0; + new_device = kmalloc(sizeof(*new_device), GFP_NOFS); + BUG_ON(!new_device); + memcpy(new_device, device, sizeof(*new_device)); + new_device->name = kstrdup(device->name, GFP_NOFS); + BUG_ON(!new_device->name); + new_device->bdev = NULL; + new_device->writeable = 0; + new_device->in_fs_metadata = 0; + list_replace_rcu(&device->dev_list, &new_device->dev_list); + + call_rcu(&device->rcu, free_device); } mutex_unlock(&fs_devices->device_list_mutex); @@ -1204,11 +1236,13 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) struct block_device *bdev; struct buffer_head *bh = NULL; struct btrfs_super_block *disk_super; + struct btrfs_fs_devices *cur_devices; u64 all_avail; u64 devid; u64 num_devices; u8 *dev_uuid; int ret = 0; + bool clear_super = false; mutex_lock(&uuid_mutex); mutex_lock(&root->fs_info->volume_mutex); @@ -1294,6 +1328,7 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) list_del_init(&device->dev_alloc_list); unlock_chunks(root); root->fs_info->fs_devices->rw_devices--; + clear_super = true; } ret = btrfs_shrink_device(device, 0); @@ -1304,16 +1339,15 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) if (ret) goto error_undo; - device->in_fs_metadata = 0; - /* * the device list mutex makes sure that we don't change * the device list while someone else is writing out all * the device supers. */ + + cur_devices = device->fs_devices; mutex_lock(&root->fs_info->fs_devices->device_list_mutex); - list_del_init(&device->dev_list); - mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); + list_del_rcu(&device->dev_list); device->fs_devices->num_devices--; @@ -1327,36 +1361,36 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) if (device->bdev == root->fs_info->fs_devices->latest_bdev) root->fs_info->fs_devices->latest_bdev = next_device->bdev; - if (device->bdev) { - blkdev_put(device->bdev, device->mode); - device->bdev = NULL; + if (device->bdev) device->fs_devices->open_devices--; - } + + call_rcu(&device->rcu, free_device); + mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); num_devices = btrfs_super_num_devices(&root->fs_info->super_copy) - 1; btrfs_set_super_num_devices(&root->fs_info->super_copy, num_devices); - if (device->fs_devices->open_devices == 0) { + if (cur_devices->open_devices == 0) { struct btrfs_fs_devices *fs_devices; fs_devices = root->fs_info->fs_devices; while (fs_devices) { - if (fs_devices->seed == device->fs_devices) + if (fs_devices->seed == cur_devices) break; fs_devices = fs_devices->seed; } - fs_devices->seed = device->fs_devices->seed; - device->fs_devices->seed = NULL; + fs_devices->seed = cur_devices->seed; + cur_devices->seed = NULL; lock_chunks(root); - __btrfs_close_devices(device->fs_devices); + __btrfs_close_devices(cur_devices); unlock_chunks(root); - free_fs_devices(device->fs_devices); + free_fs_devices(cur_devices); } /* * at this point, the device is zero sized. We want to * remove it from the devices list and zero out the old super */ - if (device->writeable) { + if (clear_super) { /* make sure this device isn't detected as part of * the FS anymore */ @@ -1365,8 +1399,6 @@ int btrfs_rm_device(struct btrfs_root *root, char *device_path) sync_dirty_buffer(bh); } - kfree(device->name); - kfree(device); ret = 0; error_brelse: @@ -1425,7 +1457,8 @@ static int btrfs_prepare_sprout(struct btrfs_trans_handle *trans, mutex_init(&seed_devices->device_list_mutex); mutex_lock(&root->fs_info->fs_devices->device_list_mutex); - list_splice_init(&fs_devices->devices, &seed_devices->devices); + list_splice_init_rcu(&fs_devices->devices, &seed_devices->devices, + synchronize_rcu); mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); list_splice_init(&fs_devices->alloc_list, &seed_devices->alloc_list); @@ -1624,7 +1657,7 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) * half setup */ mutex_lock(&root->fs_info->fs_devices->device_list_mutex); - list_add(&device->dev_list, &root->fs_info->fs_devices->devices); + list_add_rcu(&device->dev_list, &root->fs_info->fs_devices->devices); list_add(&device->dev_alloc_list, &root->fs_info->fs_devices->alloc_list); root->fs_info->fs_devices->num_devices++; diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h index cc2eadaf7a27..f1b2e4f53fc2 100644 --- a/fs/btrfs/volumes.h +++ b/fs/btrfs/volumes.h @@ -86,6 +86,8 @@ struct btrfs_device { u8 uuid[BTRFS_UUID_SIZE]; struct btrfs_work work; + struct rcu_head rcu; + struct work_struct rcu_work; }; struct btrfs_fs_devices { -- cgit v1.2.3 From 506a4196d44218eca20db529c84410dc1095e457 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 May 2011 20:07:15 +0200 Subject: ALSA: hda - Fix auto-mic detection in Conexant codec-parser Fix the auto-mic detection for Cxt auto-parser due to off-by-one missing initialization. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index e8725d24bd05..cd1a93ae2170 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3790,7 +3790,7 @@ static void cx_auto_check_auto_mic(struct hda_codec *codec) int pset[INPUT_PIN_ATTR_NORMAL + 1]; int i; - for (i = 0; i < INPUT_PIN_ATTR_NORMAL; i++) + for (i = 0; i < ARRAY_SIZE(pset); i++) pset[i] = -1; for (i = 0; i < spec->private_imux.num_items; i++) { hda_nid_t pin = spec->imux_info[i].pin; -- cgit v1.2.3 From c02324a6ae6bd3e83533c59525111ffe03b7e791 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 22 May 2011 07:04:51 -0400 Subject: cifs: remove unused SMB2 config and mount options There's no SMB2 support in the CIFS filesystem driver, so there's no need to have a config and mount option for it. Signed-off-by: Christoph Hellwig Signed-off-by: Steve French --- fs/cifs/Kconfig | 20 -------------------- fs/cifs/connect.c | 8 -------- 2 files changed, 28 deletions(-) diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig index 75c47cd8d086..1cd4c3a1862d 100644 --- a/fs/cifs/Kconfig +++ b/fs/cifs/Kconfig @@ -153,26 +153,6 @@ config CIFS_ACL Allows to fetch CIFS/NTFS ACL from the server. The DACL blob is handed over to the application/caller. -config CIFS_SMB2 - bool "SMB2 network file system support (EXPERIMENTAL)" - depends on EXPERIMENTAL && INET && BROKEN - select NLS - select KEYS - select FSCACHE - select DNS_RESOLVER - - help - This enables experimental support for the SMB2 (Server Message Block - version 2) protocol. The SMB2 protocol is the successor to the - popular CIFS and SMB network file sharing protocols. SMB2 is the - native file sharing mechanism for recent versions of Windows - operating systems (since Vista). SMB2 enablement will eventually - allow users better performance, security and features, than would be - possible with cifs. Note that smb2 mount options also are simpler - (compared to cifs) due to protocol improvements. - - Unless you are a developer or tester, say N. - config CIFS_NFSD_EXPORT bool "Allow nfsd to export CIFS file system (EXPERIMENTAL)" depends on CIFS && EXPERIMENTAL diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index da284e3cb653..1067473b5ed1 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -102,7 +102,6 @@ struct smb_vol { bool fsc:1; /* enable fscache */ bool mfsymlinks:1; /* use Minshall+French Symlinks */ bool multiuser:1; - bool use_smb2:1; /* force smb2 use on mount instead of cifs */ unsigned int rsize; unsigned int wsize; bool sockopt_tcp_nodelay:1; @@ -1062,13 +1061,6 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, (strnicmp(value, "1", 1) == 0)) { /* this is the default */ continue; - } else if ((strnicmp(value, "smb2", 4) == 0) || - (strnicmp(value, "2", 1) == 0)) { -#ifdef CONFIG_CIFS_SMB2 - vol->use_smb2 = true; -#else - cERROR(1, "smb2 support not enabled"); -#endif /* CONFIG_CIFS_SMB2 */ } } else if ((strnicmp(data, "unc", 3) == 0) || (strnicmp(data, "target", 6) == 0) -- cgit v1.2.3 From 313d2c065253a7549f5e7f43409f1da455329acd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 May 2011 20:27:02 +0200 Subject: ALSA: hda - Fix initial capture-source with auto-mic for Cxt auto-parser Fix the initialization of capture-source route when auto-mic is enabled for Conexant auto-parser. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index cd1a93ae2170..e8dc736b2fc4 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3697,13 +3697,14 @@ static int cx_auto_mux_enum_update(struct hda_codec *codec, { struct conexant_spec *spec = codec->spec; hda_nid_t adc; + int changed = 1; if (!imux->num_items) return 0; if (idx >= imux->num_items) idx = imux->num_items - 1; if (spec->cur_mux[0] == idx) - return 0; + changed = 0; adc = spec->imux_info[idx].adc; select_input_connection(codec, spec->imux_info[idx].adc, spec->imux_info[idx].pin); @@ -3716,7 +3717,7 @@ static int cx_auto_mux_enum_update(struct hda_codec *codec, spec->cur_adc_format); } spec->cur_mux[0] = idx; - return 1; + return changed; } static int cx_auto_mux_enum_put(struct snd_kcontrol *kcontrol, -- cgit v1.2.3 From 37bb04e5a091a5330faef0cc09930326672b7061 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Thu, 5 May 2011 09:55:11 +0000 Subject: CIFS: Simplify connection structure search calls Use separate functions for comparison between existing structure and what we are requesting for to make server, session and tcon search code easier to use on next superblock match call. Reviewed-by: Jeff Layton Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/connect.c | 90 ++++++++++++++++++++++++++++++++++--------------------- 1 file changed, 56 insertions(+), 34 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 1067473b5ed1..37b8ead2f60e 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1642,6 +1642,25 @@ match_security(struct TCP_Server_Info *server, struct smb_vol *vol) return true; } +static int match_server(struct TCP_Server_Info *server, struct sockaddr *addr, + struct smb_vol *vol) +{ + if (!net_eq(cifs_net_ns(server), current->nsproxy->net_ns)) + return 0; + + if (!match_address(server, addr, + (struct sockaddr *)&vol->srcaddr)) + return 0; + + if (!match_port(server, addr)) + return 0; + + if (!match_security(server, vol)) + return 0; + + return 1; +} + static struct TCP_Server_Info * cifs_find_tcp_session(struct sockaddr *addr, struct smb_vol *vol) { @@ -1649,17 +1668,7 @@ cifs_find_tcp_session(struct sockaddr *addr, struct smb_vol *vol) spin_lock(&cifs_tcp_ses_lock); list_for_each_entry(server, &cifs_tcp_ses_list, tcp_ses_list) { - if (!net_eq(cifs_net_ns(server), current->nsproxy->net_ns)) - continue; - - if (!match_address(server, addr, - (struct sockaddr *)&vol->srcaddr)) - continue; - - if (!match_port(server, addr)) - continue; - - if (!match_security(server, vol)) + if (!match_server(server, addr, vol)) continue; ++server->srv_count; @@ -1853,6 +1862,30 @@ out_err: return ERR_PTR(rc); } +static int match_session(struct cifsSesInfo *ses, struct smb_vol *vol) +{ + switch (ses->server->secType) { + case Kerberos: + if (vol->cred_uid != ses->cred_uid) + return 0; + break; + default: + /* anything else takes username/password */ + if (ses->user_name == NULL) + return 0; + if (strncmp(ses->user_name, vol->username, + MAX_USERNAME_SIZE)) + return 0; + if (strlen(vol->username) != 0 && + ses->password != NULL && + strncmp(ses->password, + vol->password ? vol->password : "", + MAX_PASSWORD_SIZE)) + return 0; + } + return 1; +} + static struct cifsSesInfo * cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb_vol *vol) { @@ -1860,25 +1893,8 @@ cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb_vol *vol) spin_lock(&cifs_tcp_ses_lock); list_for_each_entry(ses, &server->smb_ses_list, smb_ses_list) { - switch (server->secType) { - case Kerberos: - if (vol->cred_uid != ses->cred_uid) - continue; - break; - default: - /* anything else takes username/password */ - if (ses->user_name == NULL) - continue; - if (strncmp(ses->user_name, vol->username, - MAX_USERNAME_SIZE)) - continue; - if (strlen(vol->username) != 0 && - ses->password != NULL && - strncmp(ses->password, - vol->password ? vol->password : "", - MAX_PASSWORD_SIZE)) - continue; - } + if (!match_session(ses, vol)) + continue; ++ses->ses_count; spin_unlock(&cifs_tcp_ses_lock); return ses; @@ -2021,6 +2037,15 @@ get_ses_fail: return ERR_PTR(rc); } +static int match_tcon(struct cifsTconInfo *tcon, const char *unc) +{ + if (tcon->tidStatus == CifsExiting) + return 0; + if (strncmp(tcon->treeName, unc, MAX_TREE_SIZE)) + return 0; + return 1; +} + static struct cifsTconInfo * cifs_find_tcon(struct cifsSesInfo *ses, const char *unc) { @@ -2030,11 +2055,8 @@ cifs_find_tcon(struct cifsSesInfo *ses, const char *unc) spin_lock(&cifs_tcp_ses_lock); list_for_each(tmp, &ses->tcon_list) { tcon = list_entry(tmp, struct cifsTconInfo, tcon_list); - if (tcon->tidStatus == CifsExiting) + if (!match_tcon(tcon, unc)) continue; - if (strncmp(tcon->treeName, unc, MAX_TREE_SIZE)) - continue; - ++tcon->tc_count; spin_unlock(&cifs_tcp_ses_lock); return tcon; -- cgit v1.2.3 From 4e2d9491a78929badcf774869b458486acb96365 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 24 May 2011 00:21:26 +0200 Subject: PM / Hibernate: Update some comments in core hibernate code Some comments in the core hibernate code are outdated, some aren't necessary any more and at least one of them is plain wrong. Remove those comments or update them. Signed-off-by: Rafael J. Wysocki --- kernel/power/hibernate.c | 21 +++++++-------------- 1 file changed, 7 insertions(+), 14 deletions(-) diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index f9bec56d8825..6418d8c8cdb2 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -248,12 +248,6 @@ static int create_image(int platform_mode) if (error) return error; - /* At this point, dpm_suspend_start() has been called, but *not* - * dpm_suspend_noirq(). We *must* call dpm_suspend_noirq() now. - * Otherwise, drivers for some devices (e.g. interrupt controllers) - * become desynchronized with the actual state of the hardware - * at resume time, and evil weirdness ensues. - */ error = dpm_suspend_noirq(PMSG_FREEZE); if (error) { printk(KERN_ERR "PM: Some devices failed to power down, " @@ -297,9 +291,6 @@ static int create_image(int platform_mode) Power_up: syscore_resume(); - /* NOTE: dpm_resume_noirq() is just a resume() for devices - * that suspended with irqs off ... no overall powerup. - */ Enable_irqs: local_irq_enable(); @@ -416,24 +407,26 @@ static int resume_target_kernel(bool platform_mode) if (error) goto Enable_irqs; - /* We'll ignore saved state, but this gets preempt count (etc) right */ save_processor_state(); error = restore_highmem(); if (!error) { error = swsusp_arch_resume(); /* * The code below is only ever reached in case of a failure. - * Otherwise execution continues at place where - * swsusp_arch_suspend() was called + * Otherwise, execution continues at the place where + * swsusp_arch_suspend() was called. */ BUG_ON(!error); - /* This call to restore_highmem() undos the previous one */ + /* + * This call to restore_highmem() reverts the changes made by + * the previous one. + */ restore_highmem(); } /* * The only reason why swsusp_arch_resume() can fail is memory being * very tight, so we have to free it as soon as we can to avoid - * subsequent failures + * subsequent failures. */ swsusp_free(); restore_processor_state(); -- cgit v1.2.3 From 724d9f1cfba0cb16a7151333b501e8f7885450d8 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Thu, 5 May 2011 09:55:12 +0000 Subject: CIFS: Simplify mount code for further shared sb capability Reorganize code to get mount option at first and when get a superblock. This lets us use shared superblock model further for equal mounts. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 88 +++++++++++++++++++++++++++++++++------------------- fs/cifs/cifsproto.h | 8 ++++- fs/cifs/connect.c | 89 ++++++++++++++++++++++++++++++----------------------- 3 files changed, 114 insertions(+), 71 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 493b74ca5648..131afadce0e0 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -104,19 +104,16 @@ cifs_sb_deactive(struct super_block *sb) } static int -cifs_read_super(struct super_block *sb, void *data, - const char *devname, int silent) +cifs_read_super(struct super_block *sb, struct cifs_sb_info *cifs_sb, + void *data, struct smb_vol *volume_info, const char *devname, + int silent) { struct inode *inode; - struct cifs_sb_info *cifs_sb; int rc = 0; /* BB should we make this contingent on mount parm? */ sb->s_flags |= MS_NODIRATIME | MS_NOATIME; - sb->s_fs_info = kzalloc(sizeof(struct cifs_sb_info), GFP_KERNEL); - cifs_sb = CIFS_SB(sb); - if (cifs_sb == NULL) - return -ENOMEM; + sb->s_fs_info = cifs_sb; spin_lock_init(&cifs_sb->tlink_tree_lock); cifs_sb->tlink_tree = RB_ROOT; @@ -128,22 +125,10 @@ cifs_read_super(struct super_block *sb, void *data, } cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages; - /* - * Copy mount params to sb for use in submounts. Better to do - * the copy here and deal with the error before cleanup gets - * complicated post-mount. - */ - if (data) { - cifs_sb->mountdata = kstrndup(data, PAGE_SIZE, GFP_KERNEL); - if (cifs_sb->mountdata == NULL) { - bdi_destroy(&cifs_sb->bdi); - kfree(sb->s_fs_info); - sb->s_fs_info = NULL; - return -ENOMEM; - } - } + if (data) + cifs_sb->mountdata = data; - rc = cifs_mount(sb, cifs_sb, devname); + rc = cifs_mount(sb, cifs_sb, volume_info, devname); if (rc) { if (!silent) @@ -561,27 +546,68 @@ static const struct super_operations cifs_super_ops = { static struct dentry * cifs_do_mount(struct file_system_type *fs_type, - int flags, const char *dev_name, void *data) + int flags, const char *dev_name, void *data) { int rc; struct super_block *sb; - - sb = sget(fs_type, NULL, set_anon_super, NULL); + struct cifs_sb_info *cifs_sb; + struct smb_vol *volume_info; + struct dentry *root; + char *copied_data = NULL; cFYI(1, "Devname: %s flags: %d ", dev_name, flags); - if (IS_ERR(sb)) - return ERR_CAST(sb); + rc = cifs_setup_volume_info(&volume_info, (char *)data, dev_name); + if (rc) + return ERR_PTR(rc); + + cifs_sb = kzalloc(sizeof(struct cifs_sb_info), GFP_KERNEL); + if (cifs_sb == NULL) { + root = ERR_PTR(-ENOMEM); + goto out; + } + + cifs_setup_cifs_sb(volume_info, cifs_sb); + + sb = sget(fs_type, NULL, set_anon_super, NULL); + if (IS_ERR(sb)) { + kfree(cifs_sb); + root = ERR_CAST(sb); + goto out; + } sb->s_flags = flags; - rc = cifs_read_super(sb, data, dev_name, flags & MS_SILENT ? 1 : 0); + /* + * Copy mount params for use in submounts. Better to do + * the copy here and deal with the error before cleanup gets + * complicated post-mount. + */ + copied_data = kstrndup(data, PAGE_SIZE, GFP_KERNEL); + if (copied_data == NULL) { + root = ERR_PTR(-ENOMEM); + goto err_out; + } + + rc = cifs_read_super(sb, cifs_sb, copied_data, volume_info, dev_name, + flags & MS_SILENT ? 1 : 0); if (rc) { - deactivate_locked_super(sb); - return ERR_PTR(rc); + root = ERR_PTR(rc); + goto err_out; } + sb->s_flags |= MS_ACTIVE; - return dget(sb->s_root); + + root = dget(sb->s_root); +out: + cifs_cleanup_volume_info(&volume_info); + return root; + +err_out: + kfree(cifs_sb); + deactivate_locked_super(sb); + cifs_cleanup_volume_info(&volume_info); + return root; } static ssize_t cifs_file_aio_write(struct kiocb *iocb, const struct iovec *iov, diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 3738a322cbef..fdc0dc2c083c 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -150,8 +150,14 @@ extern struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *, struct inode *, extern int set_cifs_acl(struct cifs_ntsd *, __u32, struct inode *, const char *); +extern void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, + struct cifs_sb_info *cifs_sb); +extern int cifs_match_super(struct super_block *, void *); +extern void cifs_cleanup_volume_info(struct smb_vol **pvolume_info); +extern int cifs_setup_volume_info(struct smb_vol **pvolume_info, + char *mount_data, const char *devname); extern int cifs_mount(struct super_block *, struct cifs_sb_info *, - const char *); + struct smb_vol *, const char *); extern int cifs_umount(struct super_block *, struct cifs_sb_info *); extern void cifs_dfs_release_automount_timer(void); void cifs_proc_init(void); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 37b8ead2f60e..273cf42b2915 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2614,8 +2614,8 @@ convert_delimiter(char *path, char delim) } } -static void setup_cifs_sb(struct smb_vol *pvolume_info, - struct cifs_sb_info *cifs_sb) +void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, + struct cifs_sb_info *cifs_sb) { INIT_DELAYED_WORK(&cifs_sb->prune_tlinks, cifs_prune_tlinks); @@ -2671,6 +2671,7 @@ static void setup_cifs_sb(struct smb_vol *pvolume_info, cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode); cifs_sb->actimeo = pvolume_info->actimeo; + cifs_sb->local_nls = pvolume_info->local_nls; if (pvolume_info->noperm) cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM; @@ -2747,8 +2748,8 @@ is_path_accessible(int xid, struct cifsTconInfo *tcon, return rc; } -static void -cleanup_volume_info(struct smb_vol **pvolume_info) +void +cifs_cleanup_volume_info(struct smb_vol **pvolume_info) { struct smb_vol *volume_info; @@ -2854,40 +2855,13 @@ expand_dfs_referral(int xid, struct cifsSesInfo *pSesInfo, } #endif -int -cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, - const char *devname) +int cifs_setup_volume_info(struct smb_vol **pvolume_info, char *mount_data, + const char *devname) { - int rc; - int xid; struct smb_vol *volume_info; - struct cifsSesInfo *pSesInfo; - struct cifsTconInfo *tcon; - struct TCP_Server_Info *srvTcp; - char *full_path; - struct tcon_link *tlink; -#ifdef CONFIG_CIFS_DFS_UPCALL - int referral_walks_count = 0; -try_mount_again: - /* cleanup activities if we're chasing a referral */ - if (referral_walks_count) { - if (tcon) - cifs_put_tcon(tcon); - else if (pSesInfo) - cifs_put_smb_ses(pSesInfo); - - cleanup_volume_info(&volume_info); - FreeXid(xid); - } -#endif - rc = 0; - tcon = NULL; - pSesInfo = NULL; - srvTcp = NULL; - full_path = NULL; - tlink = NULL; + int rc = 0; - xid = GetXid(); + *pvolume_info = NULL; volume_info = kzalloc(sizeof(struct smb_vol), GFP_KERNEL); if (!volume_info) { @@ -2895,7 +2869,7 @@ try_mount_again: goto out; } - if (cifs_parse_mount_options(cifs_sb->mountdata, devname, + if (cifs_parse_mount_options(mount_data, devname, volume_info)) { rc = -EINVAL; goto out; @@ -2928,7 +2902,46 @@ try_mount_again: goto out; } } - cifs_sb->local_nls = volume_info->local_nls; + + *pvolume_info = volume_info; + return rc; +out: + cifs_cleanup_volume_info(&volume_info); + return rc; +} + +int +cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, + struct smb_vol *volume_info, const char *devname) +{ + int rc = 0; + int xid; + struct cifsSesInfo *pSesInfo; + struct cifsTconInfo *tcon; + struct TCP_Server_Info *srvTcp; + char *full_path; + struct tcon_link *tlink; +#ifdef CONFIG_CIFS_DFS_UPCALL + int referral_walks_count = 0; +try_mount_again: + /* cleanup activities if we're chasing a referral */ + if (referral_walks_count) { + if (tcon) + cifs_put_tcon(tcon); + else if (pSesInfo) + cifs_put_smb_ses(pSesInfo); + + cifs_cleanup_volume_info(&volume_info); + FreeXid(xid); + } +#endif + tcon = NULL; + pSesInfo = NULL; + srvTcp = NULL; + full_path = NULL; + tlink = NULL; + + xid = GetXid(); /* get a reference to a tcp session */ srvTcp = cifs_get_tcp_session(volume_info); @@ -2945,7 +2958,6 @@ try_mount_again: goto mount_fail_check; } - setup_cifs_sb(volume_info, cifs_sb); if (pSesInfo->capabilities & CAP_LARGE_FILES) sb->s_maxbytes = MAX_LFS_FILESIZE; else @@ -3101,7 +3113,6 @@ mount_fail_check: password will be freed at unmount time) */ out: /* zero out password before freeing */ - cleanup_volume_info(&volume_info); FreeXid(xid); return rc; } -- cgit v1.2.3 From 3c1105df699188a70f5c17dc0795affea388bca7 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Sun, 22 May 2011 07:09:13 -0400 Subject: cifs: don't call mid_q_entry->callback under the Global_MidLock (try #5) Minor revision to the last version of this patch -- the only difference is the fix to the cFYI statement in cifs_reconnect. Holding the spinlock while we call this function means that it can't sleep, which really limits what it can do. Taking it out from under the spinlock also means less contention for this global lock. Change the semantics such that the Global_MidLock is not held when the callback is called. To do this requires that we take extra care not to have sync_mid_result remove the mid from the list when the mid is in a state where that has already happened. This prevents list corruption when the mid is sitting on a private list for reconnect or when cifsd is coming down. Reviewed-by: Shirish Pargaonkar Reviewed-by: Pavel Shilovsky Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 6 +++--- fs/cifs/connect.c | 30 ++++++++++++++++++++++++------ fs/cifs/transport.c | 23 ++++++++--------------- 3 files changed, 35 insertions(+), 24 deletions(-) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 76b4517e74b0..fd877c110e4c 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -543,9 +543,8 @@ struct mid_q_entry; * This is the prototype for the mid callback function. When creating one, * take special care to avoid deadlocks. Things to bear in mind: * - * - it will be called by cifsd - * - the GlobalMid_Lock will be held - * - the mid will be removed from the pending_mid_q list + * - it will be called by cifsd, with no locks held + * - the mid will be removed from any lists */ typedef void (mid_callback_t)(struct mid_q_entry *mid); @@ -656,6 +655,7 @@ static inline void free_dfs_info_array(struct dfs_info3_param *param, #define MID_RESPONSE_RECEIVED 4 #define MID_RETRY_NEEDED 8 /* session closed while this request out */ #define MID_RESPONSE_MALFORMED 0x10 +#define MID_SHUTDOWN 0x20 /* Types of response buffer returned from SendReceive2 */ #define CIFS_NO_BUFFER 0 /* Response buffer not returned */ diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 273cf42b2915..6070ba69647b 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -137,6 +137,7 @@ cifs_reconnect(struct TCP_Server_Info *server) struct cifsSesInfo *ses; struct cifsTconInfo *tcon; struct mid_q_entry *mid_entry; + struct list_head retry_list; spin_lock(&GlobalMid_Lock); if (server->tcpStatus == CifsExiting) { @@ -188,16 +189,23 @@ cifs_reconnect(struct TCP_Server_Info *server) mutex_unlock(&server->srv_mutex); /* mark submitted MIDs for retry and issue callback */ - cFYI(1, "%s: issuing mid callbacks", __func__); + INIT_LIST_HEAD(&retry_list); + cFYI(1, "%s: moving mids to private list", __func__); spin_lock(&GlobalMid_Lock); list_for_each_safe(tmp, tmp2, &server->pending_mid_q) { mid_entry = list_entry(tmp, struct mid_q_entry, qhead); if (mid_entry->midState == MID_REQUEST_SUBMITTED) mid_entry->midState = MID_RETRY_NEEDED; + list_move(&mid_entry->qhead, &retry_list); + } + spin_unlock(&GlobalMid_Lock); + + cFYI(1, "%s: issuing mid callbacks", __func__); + list_for_each_safe(tmp, tmp2, &retry_list) { + mid_entry = list_entry(tmp, struct mid_q_entry, qhead); list_del_init(&mid_entry->qhead); mid_entry->callback(mid_entry); } - spin_unlock(&GlobalMid_Lock); while (server->tcpStatus == CifsNeedReconnect) { try_to_freeze(); @@ -671,12 +679,12 @@ multi_t2_fnd: mid_entry->when_received = jiffies; #endif list_del_init(&mid_entry->qhead); - mid_entry->callback(mid_entry); break; } spin_unlock(&GlobalMid_Lock); if (mid_entry != NULL) { + mid_entry->callback(mid_entry); /* Was previous buf put in mpx struct for multi-rsp? */ if (!isMultiRsp) { /* smb buffer will be freed by user thread */ @@ -740,15 +748,25 @@ multi_t2_fnd: cifs_small_buf_release(smallbuf); if (!list_empty(&server->pending_mid_q)) { + struct list_head dispose_list; + + INIT_LIST_HEAD(&dispose_list); spin_lock(&GlobalMid_Lock); list_for_each_safe(tmp, tmp2, &server->pending_mid_q) { mid_entry = list_entry(tmp, struct mid_q_entry, qhead); - cFYI(1, "Clearing Mid 0x%x - issuing callback", - mid_entry->mid); + cFYI(1, "Clearing mid 0x%x", mid_entry->mid); + mid_entry->midState = MID_SHUTDOWN; + list_move(&mid_entry->qhead, &dispose_list); + } + spin_unlock(&GlobalMid_Lock); + + /* now walk dispose list and issue callbacks */ + list_for_each_safe(tmp, tmp2, &dispose_list) { + mid_entry = list_entry(tmp, struct mid_q_entry, qhead); + cFYI(1, "Callback mid 0x%x", mid_entry->mid); list_del_init(&mid_entry->qhead); mid_entry->callback(mid_entry); } - spin_unlock(&GlobalMid_Lock); /* 1/8th of sec is more than enough time for them to exit */ msleep(125); } diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index 16bcc0725cee..d1998b6086ef 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -426,7 +426,7 @@ SendReceiveNoRsp(const unsigned int xid, struct cifsSesInfo *ses, } static int -sync_mid_result(struct mid_q_entry *mid, struct TCP_Server_Info *server) +cifs_sync_mid_result(struct mid_q_entry *mid, struct TCP_Server_Info *server) { int rc = 0; @@ -434,28 +434,21 @@ sync_mid_result(struct mid_q_entry *mid, struct TCP_Server_Info *server) mid->mid, mid->midState); spin_lock(&GlobalMid_Lock); - /* ensure that it's no longer on the pending_mid_q */ - list_del_init(&mid->qhead); - switch (mid->midState) { case MID_RESPONSE_RECEIVED: spin_unlock(&GlobalMid_Lock); return rc; - case MID_REQUEST_SUBMITTED: - /* socket is going down, reject all calls */ - if (server->tcpStatus == CifsExiting) { - cERROR(1, "%s: canceling mid=%d cmd=0x%x state=%d", - __func__, mid->mid, mid->command, mid->midState); - rc = -EHOSTDOWN; - break; - } case MID_RETRY_NEEDED: rc = -EAGAIN; break; case MID_RESPONSE_MALFORMED: rc = -EIO; break; + case MID_SHUTDOWN: + rc = -EHOSTDOWN; + break; default: + list_del_init(&mid->qhead); cERROR(1, "%s: invalid mid state mid=%d state=%d", __func__, mid->mid, mid->midState); rc = -EIO; @@ -618,7 +611,7 @@ SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, cifs_small_buf_release(in_buf); - rc = sync_mid_result(midQ, ses->server); + rc = cifs_sync_mid_result(midQ, ses->server); if (rc != 0) { atomic_dec(&ses->server->inFlight); wake_up(&ses->server->request_q); @@ -739,7 +732,7 @@ SendReceive(const unsigned int xid, struct cifsSesInfo *ses, spin_unlock(&GlobalMid_Lock); } - rc = sync_mid_result(midQ, ses->server); + rc = cifs_sync_mid_result(midQ, ses->server); if (rc != 0) { atomic_dec(&ses->server->inFlight); wake_up(&ses->server->request_q); @@ -914,7 +907,7 @@ SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon, rstart = 1; } - rc = sync_mid_result(midQ, ses->server); + rc = cifs_sync_mid_result(midQ, ses->server); if (rc != 0) return rc; -- cgit v1.2.3 From 6e9101aeec39961308176e0f59e73ac5d37d243a Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 24 May 2011 05:43:18 +0200 Subject: watchdog: Fix non-standard prototype of get_softlockup_thresh() This build warning slipped through: kernel/watchdog.c:102: warning: function declaration isn't a prototype As reported by Stephen Rothwell. Also address an unused variable warning that GCC 4.6.0 reports: we cannot do anything about failed watchdog ops during CPU hotplug (it's not serious enough to return an error from the notifier), so ignore them. Reported-by: Stephen Rothwell Cc: Mandeep Singh Baines Cc: Marcin Slusarz Cc: Don Zickus Cc: Peter Zijlstra Cc: Frederic Weisbecker Link: http://lkml.kernel.org/r/20110524134129.8da27016.sfr@canb.auug.org.au Signed-off-by: Ingo Molnar LKML-Reference: <20110517071642.GF22305@elte.hu> --- kernel/watchdog.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 6e63097fa73a..3d0c56ad4792 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -98,7 +98,7 @@ __setup("nosoftlockup", nosoftlockup_setup); * the thresholds with a factor: we make the soft threshold twice the amount of * time the hard threshold is. */ -static int get_softlockup_thresh() +static int get_softlockup_thresh(void) { return watchdog_thresh * 2; } @@ -415,15 +415,13 @@ static void watchdog_nmi_disable(int cpu) { return; } #endif /* CONFIG_HARDLOCKUP_DETECTOR */ /* prepare/enable/disable routines */ -static int watchdog_prepare_cpu(int cpu) +static void watchdog_prepare_cpu(int cpu) { struct hrtimer *hrtimer = &per_cpu(watchdog_hrtimer, cpu); WARN_ON(per_cpu(softlockup_watchdog, cpu)); hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); hrtimer->function = watchdog_timer_fn; - - return 0; } static int watchdog_enable(int cpu) @@ -542,17 +540,16 @@ static int __cpuinit cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu) { int hotcpu = (unsigned long)hcpu; - int err = 0; switch (action) { case CPU_UP_PREPARE: case CPU_UP_PREPARE_FROZEN: - err = watchdog_prepare_cpu(hotcpu); + watchdog_prepare_cpu(hotcpu); break; case CPU_ONLINE: case CPU_ONLINE_FROZEN: if (watchdog_enabled) - err = watchdog_enable(hotcpu); + watchdog_enable(hotcpu); break; #ifdef CONFIG_HOTPLUG_CPU case CPU_UP_CANCELED: -- cgit v1.2.3 From a3793a0d86e2d65dda6beb86fa295be25b238159 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 22 Feb 2011 09:57:44 +0000 Subject: sh: switch ap325rxa to dynamically manage the platform camera Use soc_camera_platform helper functions to dynamically manage the camera device. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ap325rxa/setup.c | 32 +++++++++++++------------------- 1 file changed, 13 insertions(+), 19 deletions(-) diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 618bd566cf53..969421f64a15 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -359,37 +359,31 @@ static struct soc_camera_link camera_link = { .priv = &camera_info, }; -static void dummy_release(struct device *dev) +static struct platform_device *camera_device; + +static void ap325rxa_camera_release(struct device *dev) { + soc_camera_platform_release(&camera_device); } -static struct platform_device camera_device = { - .name = "soc_camera_platform", - .dev = { - .platform_data = &camera_info, - .release = dummy_release, - }, -}; - static int ap325rxa_camera_add(struct soc_camera_link *icl, struct device *dev) { - if (icl != &camera_link || camera_probe() <= 0) - return -ENODEV; + int ret = soc_camera_platform_add(icl, dev, &camera_device, &camera_link, + ap325rxa_camera_release, 0); + if (ret < 0) + return ret; - camera_info.dev = dev; + ret = camera_probe(); + if (ret < 0) + soc_camera_platform_del(icl, camera_device, &camera_link); - return platform_device_register(&camera_device); + return ret; } static void ap325rxa_camera_del(struct soc_camera_link *icl) { - if (icl != &camera_link) - return; - - platform_device_unregister(&camera_device); - memset(&camera_device.dev.kobj, 0, - sizeof(camera_device.dev.kobj)); + soc_camera_platform_del(icl, camera_device, &camera_link); } #endif /* CONFIG_I2C */ -- cgit v1.2.3 From 52b96c2592e8fdb93231c9644b68112518916a57 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 15 Apr 2011 18:30:55 +0000 Subject: sh: add MMCIF runtime PM support on ecovec Signed-off-by: Guennadi Liakhovetski Cc: Simon Horman Cc: Magnus Damm Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ecovec24/setup.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index bb13d0e1b964..3a32741cc0ac 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -885,6 +885,9 @@ static struct platform_device sh_mmcif_device = { }, .num_resources = ARRAY_SIZE(sh_mmcif_resources), .resource = sh_mmcif_resources, + .archdata = { + .hwblk_id = HWBLK_MMC, + }, }; #endif -- cgit v1.2.3 From 0f0ebd980e0e8a2fd33ab3ef0d5b0cffbcddd8a1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 24 May 2011 17:25:23 +0900 Subject: sh: arch/sh/kernel/process_32.c needs linux/prefetch.h. Trivial build fix for certain configurations that don't grab linux/prefetch.h via alternate means (specifically SH-2 and SH-3 parts). Signed-off-by: Paul Mundt --- arch/sh/kernel/process_32.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index 762a13984bbd..b473f0c06fbc 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3 From 4e2b1084b0fb79c963b73586815e1ef034dc2b57 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 24 May 2011 17:33:51 +0900 Subject: sh: Update shmin to reflect PIO dependency. shmin uses __set_io_port_base() for legacy I/O mapping that ethernet and other SuperI/O functions depend on. Ensure that PIO support is built in until the board is updated for MMIO properly. Signed-off-by: Paul Mundt --- arch/sh/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index b44e37753b9a..a164c9e3c73c 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -167,7 +167,7 @@ config ARCH_HAS_CPU_IDLE_WAIT config NO_IOPORT def_bool !PCI - depends on !SH_CAYMAN && !SH_SH4202_MICRODEV + depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN config IO_TRAPPED bool -- cgit v1.2.3 From d819437156fd99da61d4e1402b2dbfc5cc472265 Mon Sep 17 00:00:00 2001 From: Eric B Munson Date: Mon, 23 May 2011 10:22:40 -0400 Subject: oprofile, powerpc: Handle events that raise an exception without overflowing Commit 0837e3242c73566fc1c0196b4ec61779c25ffc93 fixes a situation on POWER7 where events can roll back if a specualtive event doesn't actually complete. This can raise a performance monitor exception. We need to catch this to ensure that we reset the PMC. In all cases the PMC will be less than 256 cycles from overflow. This patch lifts Anton's fix for the problem in perf and applies it to oprofile as well. Signed-off-by: Eric B Munson Cc: # as far back as it applies cleanly Tested-by: Maynard Johnson Signed-off-by: Robert Richter --- arch/powerpc/oprofile/op_model_power4.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 8ee51a252cf1..e6bec74be131 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -261,6 +261,28 @@ static int get_kernel(unsigned long pc, unsigned long mmcra) return is_kernel; } +static bool pmc_overflow(unsigned long val) +{ + if ((int)val < 0) + return true; + + /* + * Events on POWER7 can roll back if a speculative event doesn't + * eventually complete. Unfortunately in some rare cases they will + * raise a performance monitor exception. We need to catch this to + * ensure we reset the PMC. In all cases the PMC will be 256 or less + * cycles from overflow. + * + * We only do this if the first pass fails to find any overflowing + * PMCs because a user might set a period of less than 256 and we + * don't want to mistakenly reset them. + */ + if (__is_processor(PV_POWER7) && ((0x80000000 - val) <= 256)) + return true; + + return false; +} + static void power4_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) { @@ -281,7 +303,7 @@ static void power4_handle_interrupt(struct pt_regs *regs, for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { val = classic_ctr_read(i); - if (val < 0) { + if (pmc_overflow(val)) { if (oprofile_running && ctr[i].enabled) { oprofile_add_ext_sample(pc, regs, i, is_kernel); classic_ctr_write(i, reset_value[i]); -- cgit v1.2.3 From 7f77897ef2b6a5ee4eb8bc24fe8b1f3eab254328 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 24 May 2011 11:43:18 +0200 Subject: HID: hiddev: fix potential use-after-free Commit 6cb4b040795 ("HID: hiddev: fix race between hiddev_disconnect and hiddev_release") made it possible to access hiddev (for unlocking the existance mutex) once hiddev has been kfreed. Change the order so that this can not happen (always unlock the mutex first, it is needed only to protect access to ->exist and ->open). Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index ff3c644888b1..4985f485932f 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -923,10 +923,11 @@ void hiddev_disconnect(struct hid_device *hid) usb_deregister_dev(usbhid->intf, &hiddev_class); if (hiddev->open) { + mutex_unlock(&hiddev->existancelock); usbhid_close(hiddev->hid); wake_up_interruptible(&hiddev->wait); } else { + mutex_unlock(&hiddev->existancelock); kfree(hiddev); } - mutex_unlock(&hiddev->existancelock); } -- cgit v1.2.3 From e2df82ffb8f61efdefba2857da09306182e9c599 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 24 May 2011 11:49:12 +0200 Subject: ALSA: hda - Fix speaker auto-mute in Cxt auto-parser Fix some logic failures in auto-mute handling in Conexant auto-parser. Also, modify codes to be a bit more understandable. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index e8dc736b2fc4..24fa31e46608 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3434,7 +3434,9 @@ static void cx_auto_parse_output(struct hda_codec *codec) break; } } - if (spec->auto_mute && cfg->line_out_pins[0] && + if (spec->auto_mute && + cfg->line_out_pins[0] && + cfg->line_out_type != AUTO_PIN_SPEAKER_OUT && cfg->line_out_pins[0] != cfg->hp_pins[0] && cfg->line_out_pins[0] != cfg->speaker_pins[0]) { for (i = 0; i < cfg->line_outs; i++) { @@ -3482,25 +3484,32 @@ static void cx_auto_update_speakers(struct hda_codec *codec) { struct conexant_spec *spec = codec->spec; struct auto_pin_cfg *cfg = &spec->autocfg; - int on; + int on = 1; - if (!spec->auto_mute) - on = 0; - else - on = spec->hp_present | spec->line_present; + /* turn on HP EAPD when HP jacks are present */ + if (spec->auto_mute) + on = spec->hp_present; cx_auto_turn_eapd(codec, cfg->hp_outs, cfg->hp_pins, on); - do_automute(codec, cfg->speaker_outs, cfg->speaker_pins, !on); + /* mute speakers in auto-mode if HP or LO jacks are plugged */ + if (spec->auto_mute) + on = !(spec->hp_present || + (spec->detect_line && spec->line_present)); + do_automute(codec, cfg->speaker_outs, cfg->speaker_pins, on); /* toggle line-out mutes if needed, too */ /* if LO is a copy of either HP or Speaker, don't need to handle it */ if (cfg->line_out_pins[0] == cfg->hp_pins[0] || cfg->line_out_pins[0] == cfg->speaker_pins[0]) return; - if (!spec->automute_lines || !spec->auto_mute) - on = 0; - else - on = spec->hp_present; - do_automute(codec, cfg->line_outs, cfg->line_out_pins, !on); + if (spec->auto_mute) { + /* mute LO in auto-mode when HP jack is present */ + if (cfg->line_out_type == AUTO_PIN_SPEAKER_OUT || + spec->automute_lines) + on = !spec->hp_present; + else + on = 1; + } + do_automute(codec, cfg->line_outs, cfg->line_out_pins, on); } static void cx_auto_hp_automute(struct hda_codec *codec) -- cgit v1.2.3 From b76a06e08d94b2a63e47837dfe46bbbf0a3af6c2 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Sun, 8 May 2011 19:32:36 -0400 Subject: oprofile: Use linux/mutex.h The oprofile code is still including asm/mutex.h instead of linux/mutex.h. Signed-off-by: Anton Blanchard Signed-off-by: Robert Richter --- drivers/oprofile/event_buffer.h | 2 +- drivers/oprofile/oprof.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/oprofile/event_buffer.h b/drivers/oprofile/event_buffer.h index 4e70749f8d16..a8d5bb3cba89 100644 --- a/drivers/oprofile/event_buffer.h +++ b/drivers/oprofile/event_buffer.h @@ -11,7 +11,7 @@ #define EVENT_BUFFER_H #include -#include +#include int alloc_event_buffer(void); diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c index f9bda64fcd1b..dccd8636095c 100644 --- a/drivers/oprofile/oprof.c +++ b/drivers/oprofile/oprof.c @@ -14,7 +14,7 @@ #include #include #include -#include +#include #include "oprof.h" #include "event_buffer.h" -- cgit v1.2.3 From e23be0a27dcc9297ff0495360d89bc5b0bf12383 Mon Sep 17 00:00:00 2001 From: Jimmy Hon Date: Fri, 20 May 2011 17:59:19 -0400 Subject: HID: add quirk for HyperPen 10000U Add 5543:0064 UC-Logic Technology Corp. Aiptek HyperPen 10000U to quirks with HID_QUIRK_MULTI_INPUT. Originally the device is reporting the x,y coordinates on Z and RX. By adding this quirk, there will be two kernel devices. The first one is muted and the second device will report coordinates on X and Y. Signed-off-by: Jimmy Hon Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 0b374a6d6db0..2bbaad70d76d 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -622,6 +622,7 @@ #define USB_VENDOR_ID_UCLOGIC 0x5543 #define USB_DEVICE_ID_UCLOGIC_TABLET_PF1209 0x0042 #define USB_DEVICE_ID_UCLOGIC_TABLET_KNA5 0x6001 +#define USB_DEVICE_ID_UCLOGIC_TABLET_TWA60 0x0064 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U 0x0003 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U 0x0004 #define USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U 0x0005 diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 0e30b140edca..621959d5cc42 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -74,6 +74,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_KNA5, HID_QUIRK_MULTI_INPUT }, + { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_TWA60, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH, HID_QUIRK_MULTI_INPUT }, -- cgit v1.2.3 From b779260b097dec295e8798277ed08ec5ecd3b2c1 Mon Sep 17 00:00:00 2001 From: Joseph Cihula Date: Tue, 3 May 2011 00:08:37 -0700 Subject: intel-iommu: fix VT-d PMR disable for TXT on S3 resume This patch is a follow on to https://lkml.org/lkml/2011/3/21/239, which was merged as commit 51a63e67da6056c13b5b597dcc9e1b3bd7ceaa55. This patch adds support for S3, as pointed out by Chris Wright. Signed-off-by: Joseph Cihula Signed-off-by: David Woodhouse --- drivers/pci/intel-iommu.c | 31 +++++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index d552d2c77844..4e4e0202e59d 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -141,6 +141,12 @@ static struct intel_iommu **g_iommus; static void __init check_tylersburg_isoch(void); static int rwbf_quirk; +/* + * set to 1 to panic kernel if can't successfully enable VT-d + * (used when kernel is launched w/ TXT) + */ +static int force_on = 0; + /* * 0: Present * 1-11: Reserved @@ -2217,7 +2223,7 @@ static int __init iommu_prepare_static_identity_mapping(int hw) return 0; } -static int __init init_dmars(int force_on) +static int __init init_dmars(void) { struct dmar_drhd_unit *drhd; struct dmar_rmrr_unit *rmrr; @@ -3117,7 +3123,17 @@ static int init_iommu_hw(void) if (iommu->qi) dmar_reenable_qi(iommu); - for_each_active_iommu(iommu, drhd) { + for_each_iommu(iommu, drhd) { + if (drhd->ignored) { + /* + * we always have to disable PMRs or DMA may fail on + * this device + */ + if (force_on) + iommu_disable_protect_mem_regions(iommu); + continue; + } + iommu_flush_write_buffer(iommu); iommu_set_root_entry(iommu); @@ -3126,7 +3142,8 @@ static int init_iommu_hw(void) DMA_CCMD_GLOBAL_INVL); iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH); - iommu_enable_translation(iommu); + if (iommu_enable_translation(iommu)) + return 1; iommu_disable_protect_mem_regions(iommu); } @@ -3193,7 +3210,10 @@ static void iommu_resume(void) unsigned long flag; if (init_iommu_hw()) { - WARN(1, "IOMMU setup failed, DMAR can not resume!\n"); + if (force_on) + panic("tboot: IOMMU setup failed, DMAR can not resume!\n"); + else + WARN(1, "IOMMU setup failed, DMAR can not resume!\n"); return; } @@ -3270,7 +3290,6 @@ static struct notifier_block device_nb = { int __init intel_iommu_init(void) { int ret = 0; - int force_on = 0; /* VT-d is required for a TXT/tboot launch, so enforce that */ force_on = tboot_force_iommu(); @@ -3308,7 +3327,7 @@ int __init intel_iommu_init(void) init_no_remapping_devices(); - ret = init_dmars(force_on); + ret = init_dmars(); if (ret) { if (force_on) panic("tboot: Failed to initialize DMARs\n"); -- cgit v1.2.3 From b3a530e4e734cab7043a3ab7d135f539042443a7 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Sun, 15 May 2011 12:34:55 +0200 Subject: intel-iommu: Remove obsolete comment from detect_intel_iommu Since cacd4213d8, this comment no longer applies. Signed-off-by: Jan Kiszka Signed-off-by: David Woodhouse --- drivers/pci/dmar.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 12e02bf92c4a..3dc9befa5aec 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -698,12 +698,7 @@ int __init detect_intel_iommu(void) { #ifdef CONFIG_INTR_REMAP struct acpi_table_dmar *dmar; - /* - * for now we will disable dma-remapping when interrupt - * remapping is enabled. - * When support for queued invalidation for IOTLB invalidation - * is added, we will not need this any more. - */ + dmar = (struct acpi_table_dmar *) dmar_tbl; if (ret && cpu_has_x2apic && dmar->flags & 0x1) printk(KERN_INFO -- cgit v1.2.3 From 7b668357810ecb5fdda4418689d50f5d95aea6a8 Mon Sep 17 00:00:00 2001 From: Alex Williamson Date: Tue, 24 May 2011 12:02:41 +0100 Subject: intel-iommu: Flush unmaps at domain_exit We typically batch unmaps to be lazily flushed out at regular intervals. When we destroy a domain, we need to force a flush of these lazy unmaps to be sure none reference the domain we're about to free. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=35062 Signed-off-by: Alex Williamson Signed-off-by: David Woodhouse Cc: stable@kernel.org --- drivers/pci/intel-iommu.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 4e4e0202e59d..395f253c0494 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -1422,6 +1422,10 @@ static void domain_exit(struct dmar_domain *domain) if (!domain) return; + /* Flush any lazy unmaps that may reference this domain */ + if (!intel_iommu_strict) + flush_unmaps_timeout(0); + domain_remove_dev_info(domain); /* destroy iovas */ put_iova_domain(&domain->iovad); -- cgit v1.2.3 From 477a66948ef8683f182682cc68e8520baf8a5b43 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 24 May 2011 14:10:32 +0200 Subject: ASoC: fix raumfeld platform Commit f0fba2ad (ASoC: multi-component - ASoC Multi-Component Support) broke support for Raumfeld platforms as it didn't take into account the different hardware features on individual devices. In particular, Raumfeld speakers have no S/PDIF output, so the members of the snd_soc_card struct must be set dynamically. Signed-off-by: Daniel Mack Acked-by: Liam Girdwood Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/pxa/raumfeld.c | 92 ++++++++++++++++++++++++++++++------------------ 1 file changed, 58 insertions(+), 34 deletions(-) diff --git a/sound/soc/pxa/raumfeld.c b/sound/soc/pxa/raumfeld.c index 2afabaf59491..1a591f1ebfbd 100644 --- a/sound/soc/pxa/raumfeld.c +++ b/sound/soc/pxa/raumfeld.c @@ -151,13 +151,13 @@ static struct snd_soc_ops raumfeld_cs4270_ops = { .hw_params = raumfeld_cs4270_hw_params, }; -static int raumfeld_line_suspend(struct snd_soc_card *card) +static int raumfeld_analog_suspend(struct snd_soc_card *card) { raumfeld_enable_audio(false); return 0; } -static int raumfeld_line_resume(struct snd_soc_card *card) +static int raumfeld_analog_resume(struct snd_soc_card *card) { raumfeld_enable_audio(true); return 0; @@ -225,32 +225,53 @@ static struct snd_soc_ops raumfeld_ak4104_ops = { .hw_params = raumfeld_ak4104_hw_params, }; -static struct snd_soc_dai_link raumfeld_dai[] = { +#define DAI_LINK_CS4270 \ +{ \ + .name = "CS4270", \ + .stream_name = "CS4270", \ + .cpu_dai_name = "pxa-ssp-dai.0", \ + .platform_name = "pxa-pcm-audio", \ + .codec_dai_name = "cs4270-hifi", \ + .codec_name = "cs4270-codec.0-0048", \ + .ops = &raumfeld_cs4270_ops, \ +} + +#define DAI_LINK_AK4104 \ +{ \ + .name = "ak4104", \ + .stream_name = "Playback", \ + .cpu_dai_name = "pxa-ssp-dai.1", \ + .codec_dai_name = "ak4104-hifi", \ + .platform_name = "pxa-pcm-audio", \ + .ops = &raumfeld_ak4104_ops, \ + .codec_name = "spi0.0", \ +} + +static struct snd_soc_dai_link snd_soc_raumfeld_connector_dai[] = { - .name = "ak4104", - .stream_name = "Playback", - .cpu_dai_name = "pxa-ssp-dai.1", - .codec_dai_name = "ak4104-hifi", - .platform_name = "pxa-pcm-audio", - .ops = &raumfeld_ak4104_ops, - .codec_name = "ak4104-codec.0", -}, + DAI_LINK_CS4270, + DAI_LINK_AK4104, +}; + +static struct snd_soc_dai_link snd_soc_raumfeld_speaker_dai[] = { - .name = "CS4270", - .stream_name = "CS4270", - .cpu_dai_name = "pxa-ssp-dai.0", - .platform_name = "pxa-pcm-audio", - .codec_dai_name = "cs4270-hifi", - .codec_name = "cs4270-codec.0-0048", - .ops = &raumfeld_cs4270_ops, -},}; - -static struct snd_soc_card snd_soc_raumfeld = { - .name = "Raumfeld", - .dai_link = raumfeld_dai, - .suspend_post = raumfeld_line_suspend, - .resume_pre = raumfeld_line_resume, - .num_links = ARRAY_SIZE(raumfeld_dai), + DAI_LINK_CS4270, +}; + +static struct snd_soc_card snd_soc_raumfeld_connector = { + .name = "Raumfeld Connector", + .dai_link = snd_soc_raumfeld_connector_dai, + .num_links = ARRAY_SIZE(snd_soc_raumfeld_connector_dai), + .suspend_post = raumfeld_analog_suspend, + .resume_pre = raumfeld_analog_resume, +}; + +static struct snd_soc_card snd_soc_raumfeld_speaker = { + .name = "Raumfeld Speaker", + .dai_link = snd_soc_raumfeld_speaker_dai, + .num_links = ARRAY_SIZE(snd_soc_raumfeld_speaker_dai), + .suspend_post = raumfeld_analog_suspend, + .resume_pre = raumfeld_analog_resume, }; static struct platform_device *raumfeld_audio_device; @@ -271,22 +292,25 @@ static int __init raumfeld_audio_init(void) set_max9485_clk(MAX9485_MCLK_FREQ_122880); - /* Register LINE and SPDIF */ + /* Register analog device */ raumfeld_audio_device = platform_device_alloc("soc-audio", 0); if (!raumfeld_audio_device) return -ENOMEM; - platform_set_drvdata(raumfeld_audio_device, - &snd_soc_raumfeld); - ret = platform_device_add(raumfeld_audio_device); - - /* no S/PDIF on Speakers */ if (machine_is_raumfeld_speaker()) + platform_set_drvdata(raumfeld_audio_device, + &snd_soc_raumfeld_speaker); + + if (machine_is_raumfeld_connector()) + platform_set_drvdata(raumfeld_audio_device, + &snd_soc_raumfeld_connector); + + ret = platform_device_add(raumfeld_audio_device); + if (ret < 0) return ret; raumfeld_enable_audio(true); - - return ret; + return 0; } static void __exit raumfeld_audio_exit(void) -- cgit v1.2.3 From 61b61e3c5c9bf37ca2915ac981f444989ab22f10 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Tue, 24 May 2011 13:57:43 +0100 Subject: ASoC: core - fix module reference counting for CPU DAIs Currently CODEC and platform drivers have their module reference count incremented soc_probe_dai_link() whilst CPU DAI drivers have their reference count incremented in soc_bind_dai_link(). CPU DAIs should have their reference count incremented in soc_probe_dai_link() just like the CODEC and platform drivers. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index bb7cd5812945..07991d438796 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1306,10 +1306,6 @@ static int soc_bind_dai_link(struct snd_soc_card *card, int num) /* no, then find CPU DAI from registered DAIs*/ list_for_each_entry(cpu_dai, &dai_list, list) { if (!strcmp(cpu_dai->name, dai_link->cpu_dai_name)) { - - if (!try_module_get(cpu_dai->dev->driver->owner)) - return -ENODEV; - rtd->cpu_dai = cpu_dai; goto find_codec; } @@ -1621,12 +1617,17 @@ static int soc_probe_dai_link(struct snd_soc_card *card, int num) rtd->pmdown_time = pmdown_time; /* probe the cpu_dai */ + if (!cpu_dai->probed) { + if (!try_module_get(cpu_dai->dev->driver->owner)) + return -ENODEV; + if (cpu_dai->driver->probe) { ret = cpu_dai->driver->probe(cpu_dai); if (ret < 0) { printk(KERN_ERR "asoc: failed to probe CPU DAI %s\n", cpu_dai->name); + module_put(cpu_dai->dev->driver->owner); return ret; } } -- cgit v1.2.3 From 3ace8e052be5293ebb3e00f819effccc64108a38 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 4 May 2011 16:35:58 +0530 Subject: [SCSI] mpt2sas: move even handling of MPT2SAS_TURN_ON_FAULT_LED into process context Driver was a sending a SEP request during interrupt context which required to go to sleep. The fix is to rearrange the code so a fake event MPT2SAS_TURN_ON_FAULT_LED is fired from interrupt context, then later during the kernel worker threads processing, the SEP request is issued to firmware. Cc: stable@kernel.org Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 94 ++++++++++++++++++++++++++---------- 1 file changed, 68 insertions(+), 26 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index f12e02358d6d..e97363c75074 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -113,6 +113,7 @@ struct sense_info { }; +#define MPT2SAS_TURN_ON_FAULT_LED (0xFFFC) #define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF) /** @@ -121,6 +122,7 @@ struct sense_info { * @work: work object (ioc->fault_reset_work_q) * @cancel_pending_work: flag set during reset handling * @ioc: per adapter object + * @device_handle: device handle * @VF_ID: virtual function id * @VP_ID: virtual port id * @ignore: flag meaning this event has been marked to ignore @@ -134,6 +136,7 @@ struct fw_event_work { u8 cancel_pending_work; struct delayed_work delayed_work; struct MPT2SAS_ADAPTER *ioc; + u16 device_handle; u8 VF_ID; u8 VP_ID; u8 ignore; @@ -4047,17 +4050,75 @@ _scsih_scsi_ioc_info(struct MPT2SAS_ADAPTER *ioc, struct scsi_cmnd *scmd, #endif /** - * _scsih_smart_predicted_fault - illuminate Fault LED + * _scsih_turn_on_fault_led - illuminate Fault LED * @ioc: per adapter object * @handle: device handle + * Context: process * * Return nothing. */ static void -_scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) +_scsih_turn_on_fault_led(struct MPT2SAS_ADAPTER *ioc, u16 handle) { Mpi2SepReply_t mpi_reply; Mpi2SepRequest_t mpi_request; + + memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t)); + mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; + mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; + mpi_request.SlotStatus = + cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); + mpi_request.DevHandle = cpu_to_le16(handle); + mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; + if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply, + &mpi_request)) != 0) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, + __FILE__, __LINE__, __func__); + return; + } + + if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) { + dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "enclosure_processor: " + "ioc_status (0x%04x), loginfo(0x%08x)\n", ioc->name, + le16_to_cpu(mpi_reply.IOCStatus), + le32_to_cpu(mpi_reply.IOCLogInfo))); + return; + } +} + +/** + * _scsih_send_event_to_turn_on_fault_led - fire delayed event + * @ioc: per adapter object + * @handle: device handle + * Context: interrupt. + * + * Return nothing. + */ +static void +_scsih_send_event_to_turn_on_fault_led(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ + struct fw_event_work *fw_event; + + fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC); + if (!fw_event) + return; + fw_event->event = MPT2SAS_TURN_ON_FAULT_LED; + fw_event->device_handle = handle; + fw_event->ioc = ioc; + _scsih_fw_event_add(ioc, fw_event); +} + +/** + * _scsih_smart_predicted_fault - process smart errors + * @ioc: per adapter object + * @handle: device handle + * Context: interrupt. + * + * Return nothing. + */ +static void +_scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) +{ struct scsi_target *starget; struct MPT2SAS_TARGET *sas_target_priv_data; Mpi2EventNotificationReply_t *event_reply; @@ -4084,30 +4145,8 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) starget_printk(KERN_WARNING, starget, "predicted fault\n"); spin_unlock_irqrestore(&ioc->sas_device_lock, flags); - if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) { - memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t)); - mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR; - mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS; - mpi_request.SlotStatus = - cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT); - mpi_request.DevHandle = cpu_to_le16(handle); - mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS; - if ((mpt2sas_base_scsi_enclosure_processor(ioc, &mpi_reply, - &mpi_request)) != 0) { - printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", - ioc->name, __FILE__, __LINE__, __func__); - return; - } - - if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) { - dewtprintk(ioc, printk(MPT2SAS_INFO_FMT - "enclosure_processor: ioc_status (0x%04x), " - "loginfo(0x%08x)\n", ioc->name, - le16_to_cpu(mpi_reply.IOCStatus), - le32_to_cpu(mpi_reply.IOCLogInfo))); - return; - } - } + if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) + _scsih_send_event_to_turn_on_fault_led(ioc, handle); /* insert into event log */ sz = offsetof(Mpi2EventNotificationReply_t, EventData) + @@ -6753,6 +6792,9 @@ _firmware_event_work(struct work_struct *work) } switch (fw_event->event) { + case MPT2SAS_TURN_ON_FAULT_LED: + _scsih_turn_on_fault_led(ioc, fw_event->device_handle); + break; case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: _scsih_sas_topology_change_event(ioc, fw_event); break; -- cgit v1.2.3 From 5fd5cc83a886d691ab8cd6d4404ca35e09ce88e3 Mon Sep 17 00:00:00 2001 From: "Kashyap, Desai" Date: Wed, 4 May 2011 16:37:04 +0530 Subject: [SCSI] mpt2sas: Driver version upgrade 08.100.00.02 Signed-off-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_base.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h index 2a3c05f6db8b..dcc289c25459 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.h +++ b/drivers/scsi/mpt2sas/mpt2sas_base.h @@ -69,11 +69,11 @@ #define MPT2SAS_DRIVER_NAME "mpt2sas" #define MPT2SAS_AUTHOR "LSI Corporation " #define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver" -#define MPT2SAS_DRIVER_VERSION "08.100.00.01" +#define MPT2SAS_DRIVER_VERSION "08.100.00.02" #define MPT2SAS_MAJOR_VERSION 08 #define MPT2SAS_MINOR_VERSION 100 #define MPT2SAS_BUILD_VERSION 00 -#define MPT2SAS_RELEASE_VERSION 01 +#define MPT2SAS_RELEASE_VERSION 02 /* * Set MPT2SAS_SG_DEPTH value based on user input. -- cgit v1.2.3 From bb650a1bef73a8c1fd076fae4c4f0701cf3b5f25 Mon Sep 17 00:00:00 2001 From: Xiangliang Yu Date: Sun, 8 May 2011 19:27:01 +0800 Subject: [SCSI] libsas: fix SATA NCQ error Current version of libsas can not handle SATA NCQ error. This patch handle SATA NCQ error as AHCI do. Signed-off-by: Xiangliang Yu Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index 31fc21f4d831..e99301421409 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -99,19 +99,29 @@ static void sas_ata_task_done(struct sas_task *task) struct sas_ha_struct *sas_ha; enum ata_completion_errors ac; unsigned long flags; + struct ata_link *link; if (!qc) goto qc_already_gone; dev = qc->ap->private_data; sas_ha = dev->port->ha; + link = &dev->sata_dev.ap->link; spin_lock_irqsave(dev->sata_dev.ap->lock, flags); if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD || ((stat->stat == SAM_STAT_CHECK_CONDITION && dev->sata_dev.command_set == ATAPI_COMMAND_SET))) { ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf); - qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command); + + if (!link->sactive) { + qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command); + } else { + link->eh_info.err_mask |= ac_err_mask(dev->sata_dev.tf.command); + if (unlikely(link->eh_info.err_mask)) + qc->flags |= ATA_QCFLAG_FAILED; + } + dev->sata_dev.sstatus = resp->sstatus; dev->sata_dev.serror = resp->serror; dev->sata_dev.scontrol = resp->scontrol; @@ -121,7 +131,13 @@ static void sas_ata_task_done(struct sas_task *task) SAS_DPRINTK("%s: SAS error %x\n", __func__, stat->stat); /* We saw a SAS error. Send a vague error. */ - qc->err_mask = ac; + if (!link->sactive) { + qc->err_mask = ac; + } else { + link->eh_info.err_mask |= AC_ERR_DEV; + qc->flags |= ATA_QCFLAG_FAILED; + } + dev->sata_dev.tf.feature = 0x04; /* status err */ dev->sata_dev.tf.command = ATA_ERR; } -- cgit v1.2.3 From 3f1abce4aba4ced0ba8be54b22f2882bdd01c746 Mon Sep 17 00:00:00 2001 From: adam radford Date: Wed, 11 May 2011 18:33:47 -0700 Subject: [SCSI] megaraid_sas: Remove MSI-X black list, use MFI_REG_STATE instead This patch for megaraid_sas removes the MSI-X black list and uses MFI_REG_STATE.ready.msiEnable instead. Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas_base.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 89c623ebadbc..19a55032218f 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -3454,7 +3454,7 @@ static int megasas_init_fw(struct megasas_instance *instance) { u32 max_sectors_1; u32 max_sectors_2; - u32 tmp_sectors; + u32 tmp_sectors, msix_enable; struct megasas_register_set __iomem *reg_set; struct megasas_ctrl_info *ctrl_info; unsigned long bar_list; @@ -3507,6 +3507,13 @@ static int megasas_init_fw(struct megasas_instance *instance) if (megasas_transition_to_ready(instance)) goto fail_ready_state; + /* Check if MSI-X is supported while in ready state */ + msix_enable = (instance->instancet->read_fw_status_reg(reg_set) & + 0x4000000) >> 0x1a; + if (msix_enable && !msix_disable && + !pci_enable_msix(instance->pdev, &instance->msixentry, 1)) + instance->msi_flag = 1; + /* Get operational params, sge flags, send init cmd to controller */ if (instance->instancet->init_adapter(instance)) goto fail_init_adapter; @@ -4076,14 +4083,6 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) else INIT_WORK(&instance->work_init, process_fw_state_change_wq); - /* Try to enable MSI-X */ - if ((instance->pdev->device != PCI_DEVICE_ID_LSI_SAS1078R) && - (instance->pdev->device != PCI_DEVICE_ID_LSI_SAS1078DE) && - (instance->pdev->device != PCI_DEVICE_ID_LSI_VERDE_ZCR) && - !msix_disable && !pci_enable_msix(instance->pdev, - &instance->msixentry, 1)) - instance->msi_flag = 1; - /* * Initialize MFI Firmware */ @@ -4332,10 +4331,6 @@ megasas_resume(struct pci_dev *pdev) if (megasas_set_dma_mask(pdev)) goto fail_set_dma_mask; - /* Now re-enable MSI-X */ - if (instance->msi_flag) - pci_enable_msix(instance->pdev, &instance->msixentry, 1); - /* * Initialize MFI Firmware */ @@ -4348,6 +4343,10 @@ megasas_resume(struct pci_dev *pdev) if (megasas_transition_to_ready(instance)) goto fail_ready_state; + /* Now re-enable MSI-X */ + if (instance->msi_flag) + pci_enable_msix(instance->pdev, &instance->msixentry, 1); + switch (instance->pdev->device) { case PCI_DEVICE_ID_LSI_FUSION: { -- cgit v1.2.3 From 70d031f36fa50a53128d0d2b5f95032cd534778b Mon Sep 17 00:00:00 2001 From: adam radford Date: Wed, 11 May 2011 18:33:58 -0700 Subject: [SCSI] megaraid_sas: Remove un-used function The following patch for megaraid_sas removes un-used function megasas_return_cmd_for_smid(). Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 145a8cffb1fa..25dd5ce64d5e 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -695,22 +695,6 @@ fail_get_cmd: return ret; } -/* - * megasas_return_cmd_for_smid - Returns a cmd_fusion for a SMID - * @instance: Adapter soft state - * - */ -void -megasas_return_cmd_for_smid(struct megasas_instance *instance, u16 smid) -{ - struct fusion_context *fusion; - struct megasas_cmd_fusion *cmd; - - fusion = instance->ctrl_context; - cmd = fusion->cmd_list[smid - 1]; - megasas_return_cmd_fusion(instance, cmd); -} - /* * megasas_get_ld_map_info - Returns FW's ld_map structure * @instance: Adapter soft state -- cgit v1.2.3 From 7e70e7336515cd367b9cfcf5379e04808bdcbe96 Mon Sep 17 00:00:00 2001 From: adam radford Date: Wed, 11 May 2011 18:34:08 -0700 Subject: [SCSI] megaraid_sas: Check MFI_REG_STATE.fault.resetAdapter The following patch for megaraid_sas fixes the function megasas_reset_fusion() and makes the reset code check MFI_REG_STATE.fault.resetAdapter. Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas.h | 4 ++-- drivers/scsi/megaraid/megaraid_sas_fusion.c | 26 ++++++++++++++++---------- 2 files changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 046dcc672ec1..982ef8364236 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -76,8 +76,8 @@ #define MFI_STATE_READY 0xB0000000 #define MFI_STATE_OPERATIONAL 0xC0000000 #define MFI_STATE_FAULT 0xF0000000 -#define MFI_RESET_REQUIRED 0x00000001 - +#define MFI_RESET_REQUIRED 0x00000001 +#define MFI_RESET_ADAPTER 0x00000002 #define MEGAMFI_FRAME_SIZE 64 /* diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index 25dd5ce64d5e..de43795ca90f 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -2010,17 +2010,11 @@ int megasas_reset_fusion(struct Scsi_Host *shost) struct fusion_context *fusion; struct megasas_cmd *cmd_mfi; union MEGASAS_REQUEST_DESCRIPTOR_UNION *req_desc; - u32 host_diag, abs_state; + u32 host_diag, abs_state, status_reg, reset_adapter; instance = (struct megasas_instance *)shost->hostdata; fusion = instance->ctrl_context; - mutex_lock(&instance->reset_mutex); - set_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags); - instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT; - instance->instancet->disable_intr(instance->reg_set); - msleep(1000); - if (instance->adprecovery == MEGASAS_HW_CRITICAL_ERROR) { printk(KERN_WARNING "megaraid_sas: Hardware critical error, " "returning FAILED.\n"); @@ -2028,6 +2022,12 @@ int megasas_reset_fusion(struct Scsi_Host *shost) goto out; } + mutex_lock(&instance->reset_mutex); + set_bit(MEGASAS_FUSION_IN_RESET, &instance->reset_flags); + instance->adprecovery = MEGASAS_ADPRESET_SM_INFAULT; + instance->instancet->disable_intr(instance->reg_set); + msleep(1000); + /* First try waiting for commands to complete */ if (megasas_wait_for_outstanding_fusion(instance)) { printk(KERN_WARNING "megaraid_sas: resetting fusion " @@ -2044,7 +2044,12 @@ int megasas_reset_fusion(struct Scsi_Host *shost) } } - if (instance->disableOnlineCtrlReset == 1) { + status_reg = instance->instancet->read_fw_status_reg( + instance->reg_set); + abs_state = status_reg & MFI_STATE_MASK; + reset_adapter = status_reg & MFI_RESET_ADAPTER; + if (instance->disableOnlineCtrlReset || + (abs_state == MFI_STATE_FAULT && !reset_adapter)) { /* Reset not supported, kill adapter */ printk(KERN_WARNING "megaraid_sas: Reset not supported" ", killing adapter.\n"); @@ -2073,6 +2078,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost) /* Check that the diag write enable (DRWE) bit is on */ host_diag = readl(&instance->reg_set->fusion_host_diag); + retry = 0; while (!(host_diag & HOST_DIAG_WRITE_ENABLE)) { msleep(100); host_diag = @@ -2110,7 +2116,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost) abs_state = instance->instancet->read_fw_status_reg( - instance->reg_set); + instance->reg_set) & MFI_STATE_MASK; retry = 0; while ((abs_state <= MFI_STATE_FW_INIT) && @@ -2118,7 +2124,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost) msleep(100); abs_state = instance->instancet->read_fw_status_reg( - instance->reg_set); + instance->reg_set) & MFI_STATE_MASK; } if (abs_state <= MFI_STATE_FW_INIT) { printk(KERN_WARNING "megaraid_sas: firmware " -- cgit v1.2.3 From 46fd256e05581e4a04d5a8ec107d35afe938c65b Mon Sep 17 00:00:00 2001 From: adam radford Date: Wed, 11 May 2011 18:34:17 -0700 Subject: [SCSI] megaraid_sas: Disable interrupts/free_irq() in megasas_shutdown() The following patch for megaraid_sas disables interrupts and free_irq() in megasas_shutdown(). Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas_base.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 19a55032218f..a32b6ba0e9e5 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -4526,6 +4526,11 @@ static void megasas_shutdown(struct pci_dev *pdev) instance->unload = 1; megasas_flush_cache(instance); megasas_shutdown_controller(instance, MR_DCMD_CTRL_SHUTDOWN); + instance->instancet->disable_intr(instance->reg_set); + free_irq(instance->msi_flag ? instance->msixentry.vector : + instance->pdev->irq, instance); + if (instance->msi_flag) + pci_disable_msix(instance->pdev); } /** -- cgit v1.2.3 From 541f90b7c6dffe4cf4a3e8142ac8bd047da94733 Mon Sep 17 00:00:00 2001 From: adam radford Date: Wed, 11 May 2011 18:34:29 -0700 Subject: [SCSI] megaraid_sas: Fix bug where AENs could be lost in probe() and resume() Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas_base.c | 27 ++++++++++++++------------- 1 file changed, 14 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index a32b6ba0e9e5..f43ab031edc8 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -4114,6 +4114,14 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) megasas_mgmt_info.instance[megasas_mgmt_info.max_index] = instance; megasas_mgmt_info.max_index++; + /* + * Register with SCSI mid-layer + */ + if (megasas_io_attach(instance)) + goto fail_io_attach; + + instance->unload = 0; + /* * Initiate AEN (Asynchronous Event Notification) */ @@ -4122,13 +4130,6 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) goto fail_start_aen; } - /* - * Register with SCSI mid-layer - */ - if (megasas_io_attach(instance)) - goto fail_io_attach; - - instance->unload = 0; return 0; fail_start_aen: @@ -4383,12 +4384,6 @@ megasas_resume(struct pci_dev *pdev) instance->instancet->enable_intr(instance->reg_set); - /* - * Initiate AEN (Asynchronous Event Notification) - */ - if (megasas_start_aen(instance)) - printk(KERN_ERR "megasas: Start AEN failed\n"); - /* Initialize the cmd completion timer */ if (poll_mode_io) megasas_start_timer(instance, &instance->io_completion_timer, @@ -4396,6 +4391,12 @@ megasas_resume(struct pci_dev *pdev) MEGASAS_COMPLETION_TIMER_INTERVAL); instance->unload = 0; + /* + * Initiate AEN (Asynchronous Event Notification) + */ + if (megasas_start_aen(instance)) + printk(KERN_ERR "megasas: Start AEN failed\n"); + return 0; fail_irq: -- cgit v1.2.3 From 495c5609700e21059fa0a4651b0f4f5847332319 Mon Sep 17 00:00:00 2001 From: adam radford Date: Wed, 11 May 2011 18:34:40 -0700 Subject: [SCSI] megaraid_sas: Convert 6,10,12 byte CDB's for FastPath IO The following patch for megaraid_sas converts 6,10,12 byte CDB's to 16 byte CDB for large LBA's for FastPath IO. Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas_fusion.c | 41 ++++++++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c index de43795ca90f..f13e7abd345a 100644 --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c @@ -1137,7 +1137,7 @@ megasas_set_pd_lba(struct MPI2_RAID_SCSI_IO_REQUEST *io_request, u8 cdb_len, u64 start_blk = io_info->pdBlock; u8 *cdb = io_request->CDB.CDB32; u32 num_blocks = io_info->numBlocks; - u8 opcode, flagvals, groupnum, control; + u8 opcode = 0, flagvals = 0, groupnum = 0, control = 0; /* Check if T10 PI (DIF) is enabled for this LD */ ld = MR_TargetIdToLdGet(io_info->ldTgtId, local_map_ptr); @@ -1219,7 +1219,46 @@ megasas_set_pd_lba(struct MPI2_RAID_SCSI_IO_REQUEST *io_request, u8 cdb_len, cdb[8] = (u8)(num_blocks & 0xff); cdb[7] = (u8)((num_blocks >> 8) & 0xff); + io_request->IoFlags = 10; /* Specify 10-byte cdb */ cdb_len = 10; + } else if ((cdb_len < 16) && (start_blk > 0xffffffff)) { + /* Convert to 16 byte CDB for large LBA's */ + switch (cdb_len) { + case 6: + opcode = cdb[0] == READ_6 ? READ_16 : WRITE_16; + control = cdb[5]; + break; + case 10: + opcode = + cdb[0] == READ_10 ? READ_16 : WRITE_16; + flagvals = cdb[1]; + groupnum = cdb[6]; + control = cdb[9]; + break; + case 12: + opcode = + cdb[0] == READ_12 ? READ_16 : WRITE_16; + flagvals = cdb[1]; + groupnum = cdb[10]; + control = cdb[11]; + break; + } + + memset(cdb, 0, sizeof(io_request->CDB.CDB32)); + + cdb[0] = opcode; + cdb[1] = flagvals; + cdb[14] = groupnum; + cdb[15] = control; + + /* Transfer length */ + cdb[13] = (u8)(num_blocks & 0xff); + cdb[12] = (u8)((num_blocks >> 8) & 0xff); + cdb[11] = (u8)((num_blocks >> 16) & 0xff); + cdb[10] = (u8)((num_blocks >> 24) & 0xff); + + io_request->IoFlags = 16; /* Specify 16-byte cdb */ + cdb_len = 16; } /* Normal case, just load LBA here */ -- cgit v1.2.3 From 3cc6851f9a3509e2ced0eb218599857b07c0ab46 Mon Sep 17 00:00:00 2001 From: adam radford Date: Wed, 11 May 2011 18:34:52 -0700 Subject: [SCSI] megaraid_sas: Add 1078 OCR support Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- drivers/scsi/megaraid/megaraid_sas_base.c | 34 +++++++++++++++---------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index f43ab031edc8..09a0d9539ca6 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -437,15 +437,18 @@ megasas_read_fw_status_reg_ppc(struct megasas_register_set __iomem * regs) static int megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs) { - u32 status; + u32 status, mfiStatus = 0; + /* * Check if it is our interrupt */ status = readl(®s->outbound_intr_status); - if (!(status & MFI_REPLY_1078_MESSAGE_INTERRUPT)) { - return 0; - } + if (status & MFI_REPLY_1078_MESSAGE_INTERRUPT) + mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE; + + if (status & MFI_G2_OUTBOUND_DOORBELL_CHANGE_INTERRUPT) + mfiStatus |= MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE; /* * Clear the interrupt by writing back the same value @@ -455,8 +458,9 @@ megasas_clear_intr_ppc(struct megasas_register_set __iomem * regs) /* Dummy readl to force pci flush */ readl(®s->outbound_doorbell_clear); - return 1; + return mfiStatus; } + /** * megasas_fire_cmd_ppc - Sends command to the FW * @frame_phys_addr : Physical address of cmd @@ -476,17 +480,6 @@ megasas_fire_cmd_ppc(struct megasas_instance *instance, spin_unlock_irqrestore(&instance->hba_lock, flags); } -/** - * megasas_adp_reset_ppc - For controller reset - * @regs: MFI register set - */ -static int -megasas_adp_reset_ppc(struct megasas_instance *instance, - struct megasas_register_set __iomem *regs) -{ - return 0; -} - /** * megasas_check_reset_ppc - For controller reset check * @regs: MFI register set @@ -495,8 +488,12 @@ static int megasas_check_reset_ppc(struct megasas_instance *instance, struct megasas_register_set __iomem *regs) { + if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) + return 1; + return 0; } + static struct megasas_instance_template megasas_instance_template_ppc = { .fire_cmd = megasas_fire_cmd_ppc, @@ -504,7 +501,7 @@ static struct megasas_instance_template megasas_instance_template_ppc = { .disable_intr = megasas_disable_intr_ppc, .clear_intr = megasas_clear_intr_ppc, .read_fw_status_reg = megasas_read_fw_status_reg_ppc, - .adp_reset = megasas_adp_reset_ppc, + .adp_reset = megasas_adp_reset_xscale, .check_reset = megasas_check_reset_ppc, .service_isr = megasas_isr, .tasklet = megasas_complete_cmd_dpc, @@ -620,6 +617,9 @@ static int megasas_check_reset_skinny(struct megasas_instance *instance, struct megasas_register_set __iomem *regs) { + if (instance->adprecovery != MEGASAS_HBA_OPERATIONAL) + return 1; + return 0; } -- cgit v1.2.3 From 4f788dce0baf44295a8d9708d3f124587158c061 Mon Sep 17 00:00:00 2001 From: adam radford Date: Wed, 11 May 2011 18:35:05 -0700 Subject: [SCSI] megaraid_sas: Version and Changelog update Signed-off-by: Adam Radford Signed-off-by: James Bottomley --- Documentation/scsi/ChangeLog.megaraid_sas | 14 ++++++++++++++ drivers/scsi/megaraid/megaraid_sas.h | 6 +++--- drivers/scsi/megaraid/megaraid_sas_base.c | 2 +- 3 files changed, 18 insertions(+), 4 deletions(-) diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 4d9ce73ff730..9ed1d9d96783 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,17 @@ +Release Date : Wed. May 11, 2011 17:00:00 PST 2010 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford +Current Version : 00.00.05.38-rc1 +Old Version : 00.00.05.34-rc1 + 1. Remove MSI-X black list, use MFI_REG_STATE.ready.msiEnable. + 2. Remove un-used function megasas_return_cmd_for_smid(). + 3. Check MFI_REG_STATE.fault.resetAdapter in megasas_reset_fusion(). + 4. Disable interrupts/free_irq() in megasas_shutdown(). + 5. Fix bug where AENs could be lost in probe() and resume(). + 6. Convert 6,10,12 byte CDB's to 16 byte CDB for large LBA's for FastPath + IO. + 7. Add 1078 OCR support. +------------------------------------------------------------------------------- Release Date : Thu. Feb 24, 2011 17:00:00 PST 2010 - (emaild-id:megaraidlinux@lsi.com) Adam Radford diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 982ef8364236..7370c084b178 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -33,9 +33,9 @@ /* * MegaRAID SAS Driver meta data */ -#define MEGASAS_VERSION "00.00.05.34-rc1" -#define MEGASAS_RELDATE "Feb. 24, 2011" -#define MEGASAS_EXT_VERSION "Thu. Feb. 24 17:00:00 PDT 2011" +#define MEGASAS_VERSION "00.00.05.38-rc1" +#define MEGASAS_RELDATE "May. 11, 2011" +#define MEGASAS_EXT_VERSION "Wed. May. 11 17:00:00 PDT 2011" /* * Device IDs diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 09a0d9539ca6..2d8cdce7b2f5 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -18,7 +18,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * FILE: megaraid_sas_base.c - * Version : v00.00.05.34-rc1 + * Version : v00.00.05.38-rc1 * * Authors: LSI Corporation * Sreenivas Bagalkote -- cgit v1.2.3 From c051ad2e57e379e07e4ec28b2a54eeb0d04c5d59 Mon Sep 17 00:00:00 2001 From: Bhanu Prakash Gollapudi Date: Mon, 16 May 2011 16:45:24 -0700 Subject: [SCSI] libfcoe: Incorrect CVL handling for NPIV ports Host doesnt handle CVL to NPIV instantiated ports correctly. - As per FC-BB-5 Rev 2 CVLs with no VN_Port descriptors shall be treated as implicit logout of ALL vn_ports. - CVL for NPIV ports should be handled before physical port even if descriptor for physical port appears before NPIV ports Signed-off-by: Bhanu Prakash Gollapudi Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe_ctlr.c | 133 ++++++++++++++++++++++++++++-------------- 1 file changed, 90 insertions(+), 43 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index 229e4af5508a..c74c4b8e71ef 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -1173,7 +1173,9 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, struct fc_lport *lport = fip->lp; struct fc_lport *vn_port = NULL; u32 desc_mask; - int is_vn_port = 0; + int num_vlink_desc; + int reset_phys_port = 0; + struct fip_vn_desc **vlink_desc_arr = NULL; LIBFCOE_FIP_DBG(fip, "Clear Virtual Link received\n"); @@ -1183,70 +1185,73 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, /* * mask of required descriptors. Validating each one clears its bit. */ - desc_mask = BIT(FIP_DT_MAC) | BIT(FIP_DT_NAME) | BIT(FIP_DT_VN_ID); + desc_mask = BIT(FIP_DT_MAC) | BIT(FIP_DT_NAME); rlen = ntohs(fh->fip_dl_len) * FIP_BPW; desc = (struct fip_desc *)(fh + 1); + + /* + * Actually need to subtract 'sizeof(*mp) - sizeof(*wp)' from 'rlen' + * before determining max Vx_Port descriptor but a buggy FCF could have + * omited either or both MAC Address and Name Identifier descriptors + */ + num_vlink_desc = rlen / sizeof(*vp); + if (num_vlink_desc) + vlink_desc_arr = kmalloc(sizeof(vp) * num_vlink_desc, + GFP_ATOMIC); + if (!vlink_desc_arr) + return; + num_vlink_desc = 0; + while (rlen >= sizeof(*desc)) { dlen = desc->fip_dlen * FIP_BPW; if (dlen > rlen) - return; + goto err; /* Drop CVL if there are duplicate critical descriptors */ if ((desc->fip_dtype < 32) && + (desc->fip_dtype != FIP_DT_VN_ID) && !(desc_mask & 1U << desc->fip_dtype)) { LIBFCOE_FIP_DBG(fip, "Duplicate Critical " "Descriptors in FIP CVL\n"); - return; + goto err; } switch (desc->fip_dtype) { case FIP_DT_MAC: mp = (struct fip_mac_desc *)desc; if (dlen < sizeof(*mp)) - return; + goto err; if (compare_ether_addr(mp->fd_mac, fcf->fcf_mac)) - return; + goto err; desc_mask &= ~BIT(FIP_DT_MAC); break; case FIP_DT_NAME: wp = (struct fip_wwn_desc *)desc; if (dlen < sizeof(*wp)) - return; + goto err; if (get_unaligned_be64(&wp->fd_wwn) != fcf->switch_name) - return; + goto err; desc_mask &= ~BIT(FIP_DT_NAME); break; case FIP_DT_VN_ID: vp = (struct fip_vn_desc *)desc; if (dlen < sizeof(*vp)) - return; - if (compare_ether_addr(vp->fd_mac, - fip->get_src_addr(lport)) == 0 && - get_unaligned_be64(&vp->fd_wwpn) == lport->wwpn && - ntoh24(vp->fd_fc_id) == lport->port_id) { - desc_mask &= ~BIT(FIP_DT_VN_ID); - break; + goto err; + vlink_desc_arr[num_vlink_desc++] = vp; + vn_port = fc_vport_id_lookup(lport, + ntoh24(vp->fd_fc_id)); + if (vn_port && (vn_port == lport)) { + mutex_lock(&fip->ctlr_mutex); + per_cpu_ptr(lport->dev_stats, + get_cpu())->VLinkFailureCount++; + put_cpu(); + fcoe_ctlr_reset(fip); + mutex_unlock(&fip->ctlr_mutex); } - /* check if clr_vlink is for NPIV port */ - mutex_lock(&lport->lp_mutex); - list_for_each_entry(vn_port, &lport->vports, list) { - if (compare_ether_addr(vp->fd_mac, - fip->get_src_addr(vn_port)) == 0 && - (get_unaligned_be64(&vp->fd_wwpn) - == vn_port->wwpn) && - (ntoh24(vp->fd_fc_id) == - fc_host_port_id(vn_port->host))) { - desc_mask &= ~BIT(FIP_DT_VN_ID); - is_vn_port = 1; - break; - } - } - mutex_unlock(&lport->lp_mutex); - break; default: /* standard says ignore unknown descriptors >= 128 */ if (desc->fip_dtype < FIP_DT_VENDOR_BASE) - return; + goto err; break; } desc = (struct fip_desc *)((char *)desc + dlen); @@ -1256,26 +1261,68 @@ static void fcoe_ctlr_recv_clr_vlink(struct fcoe_ctlr *fip, /* * reset only if all required descriptors were present and valid. */ - if (desc_mask) { + if (desc_mask) LIBFCOE_FIP_DBG(fip, "missing descriptors mask %x\n", desc_mask); + else if (!num_vlink_desc) { + LIBFCOE_FIP_DBG(fip, "CVL: no Vx_Port descriptor found\n"); + /* + * No Vx_Port description. Clear all NPIV ports, + * followed by physical port + */ + mutex_lock(&lport->lp_mutex); + list_for_each_entry(vn_port, &lport->vports, list) + fc_lport_reset(vn_port); + mutex_unlock(&lport->lp_mutex); + + mutex_lock(&fip->ctlr_mutex); + per_cpu_ptr(lport->dev_stats, + get_cpu())->VLinkFailureCount++; + put_cpu(); + fcoe_ctlr_reset(fip); + mutex_unlock(&fip->ctlr_mutex); + + fc_lport_reset(fip->lp); + fcoe_ctlr_solicit(fip, NULL); } else { - LIBFCOE_FIP_DBG(fip, "performing Clear Virtual Link\n"); + int i; - if (is_vn_port) - fc_lport_reset(vn_port); - else { - mutex_lock(&fip->ctlr_mutex); - per_cpu_ptr(lport->dev_stats, - get_cpu())->VLinkFailureCount++; - put_cpu(); - fcoe_ctlr_reset(fip); - mutex_unlock(&fip->ctlr_mutex); + LIBFCOE_FIP_DBG(fip, "performing Clear Virtual Link\n"); + for (i = 0; i < num_vlink_desc; i++) { + vp = vlink_desc_arr[i]; + vn_port = fc_vport_id_lookup(lport, + ntoh24(vp->fd_fc_id)); + if (!vn_port) + continue; + + /* + * 'port_id' is already validated, check MAC address and + * wwpn + */ + if (compare_ether_addr(fip->get_src_addr(vn_port), + vp->fd_mac) != 0 || + get_unaligned_be64(&vp->fd_wwpn) != + vn_port->wwpn) + continue; + + if (vn_port == lport) + /* + * Physical port, defer processing till all + * listed NPIV ports are cleared + */ + reset_phys_port = 1; + else /* NPIV port */ + fc_lport_reset(vn_port); + } + if (reset_phys_port) { fc_lport_reset(fip->lp); fcoe_ctlr_solicit(fip, NULL); } } + +err: + kfree(vlink_desc_arr); } /** -- cgit v1.2.3 From bdf252183e58654fcceedbf3fdcfd878b9e4f2d6 Mon Sep 17 00:00:00 2001 From: Neerav Parikh Date: Mon, 16 May 2011 16:45:29 -0700 Subject: [SCSI] fcoe: Prevent creation of an NPIV port with duplicate WWPN This patch adds a validation step before allowing creation of a new NPIV port. It checks whether the WWPN passed for the new NPIV port to be created is unique for the given physical port. Signed-off-by: Neerav Parikh Tested-by: Ross Brattain Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/fcoe/fcoe.h | 10 +++++++++ 2 files changed, 68 insertions(+) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index cc23bd9480b2..155d7b9bdeae 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -137,6 +137,7 @@ static int fcoe_vport_create(struct fc_vport *, bool disabled); static int fcoe_vport_disable(struct fc_vport *, bool disable); static void fcoe_set_vport_symbolic_name(struct fc_vport *); static void fcoe_set_port_id(struct fc_lport *, u32, struct fc_frame *); +static int fcoe_validate_vport_create(struct fc_vport *); static struct libfc_function_template fcoe_libfc_fcn_templ = { .frame_send = fcoe_xmit, @@ -2351,6 +2352,17 @@ static int fcoe_vport_create(struct fc_vport *vport, bool disabled) struct fcoe_interface *fcoe = port->priv; struct net_device *netdev = fcoe->netdev; struct fc_lport *vn_port; + int rc; + char buf[32]; + + rc = fcoe_validate_vport_create(vport); + if (rc) { + wwn_to_str(vport->port_name, buf, sizeof(buf)); + printk(KERN_ERR "fcoe: Failed to create vport, " + "WWPN (0x%s) already exists\n", + buf); + return rc; + } mutex_lock(&fcoe_config_mutex); vn_port = fcoe_if_create(fcoe, &vport->dev, 1); @@ -2497,3 +2509,49 @@ static void fcoe_set_port_id(struct fc_lport *lport, if (fp && fc_frame_payload_op(fp) == ELS_FLOGI) fcoe_ctlr_recv_flogi(&fcoe->ctlr, lport, fp); } + +/** + * fcoe_validate_vport_create() - Validate a vport before creating it + * @vport: NPIV port to be created + * + * This routine is meant to add validation for a vport before creating it + * via fcoe_vport_create(). + * Current validations are: + * - WWPN supplied is unique for given lport + * + * +*/ +static int fcoe_validate_vport_create(struct fc_vport *vport) +{ + struct Scsi_Host *shost = vport_to_shost(vport); + struct fc_lport *n_port = shost_priv(shost); + struct fc_lport *vn_port; + int rc = 0; + char buf[32]; + + mutex_lock(&n_port->lp_mutex); + + wwn_to_str(vport->port_name, buf, sizeof(buf)); + /* Check if the wwpn is not same as that of the lport */ + if (!memcmp(&n_port->wwpn, &vport->port_name, sizeof(u64))) { + FCOE_DBG("vport WWPN 0x%s is same as that of the " + "base port WWPN\n", buf); + rc = -EINVAL; + goto out; + } + + /* Check if there is any existing vport with same wwpn */ + list_for_each_entry(vn_port, &n_port->vports, list) { + if (!memcmp(&vn_port->wwpn, &vport->port_name, sizeof(u64))) { + FCOE_DBG("vport with given WWPN 0x%s already " + "exists\n", buf); + rc = -EINVAL; + break; + } + } + +out: + mutex_unlock(&n_port->lp_mutex); + + return rc; +} diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h index 408a6fd78fb4..c4a93993c0cf 100644 --- a/drivers/scsi/fcoe/fcoe.h +++ b/drivers/scsi/fcoe/fcoe.h @@ -99,4 +99,14 @@ static inline struct net_device *fcoe_netdev(const struct fc_lport *lport) ((struct fcoe_port *)lport_priv(lport))->priv)->netdev; } +static inline void wwn_to_str(u64 wwn, char *buf, int len) +{ + u8 wwpn[8]; + + u64_to_wwn(wwn, wwpn); + snprintf(buf, len, "%02x%02x%02x%02x%02x%02x%02x%02x", + wwpn[0], wwpn[1], wwpn[2], wwpn[3], + wwpn[4], wwpn[5], wwpn[6], wwpn[7]); +} + #endif /* _FCOE_H_ */ -- cgit v1.2.3 From 83383dd11a445bbe493c75b9c88c243aa43df8d7 Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Mon, 16 May 2011 16:45:35 -0700 Subject: [SCSI] libfc: fix mm leak in handling incoming request for target discovery When handling incoming request, if the operation code carried by the received frame is not RSCN, the frame should be freed as in the RSCN case, or there is memory leakage. Signed-off-by: Hillf Danton Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_disc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c index 911b2736cafa..b9cb8140b398 100644 --- a/drivers/scsi/libfc/fc_disc.c +++ b/drivers/scsi/libfc/fc_disc.c @@ -205,6 +205,7 @@ static void fc_disc_recv_req(struct fc_lport *lport, struct fc_frame *fp) default: FC_DISC_DBG(disc, "Received an unsupported request, " "the opcode is (%x)\n", op); + fc_frame_free(fp); break; } } -- cgit v1.2.3 From 6a716a8535ea8ed7676cea1e122f1c3d02e55b6b Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Mon, 16 May 2011 16:45:40 -0700 Subject: [SCSI] libfc: release DDP context if frame_send() fails In case frame_send() fails, make sure to let the underlying HW release the DDP context that has already been set up before calling frame_send(). Signed-off-by: Yi Zou Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 1 + drivers/scsi/libfc/fc_fcp.c | 2 +- drivers/scsi/libfc/fc_libfc.h | 1 + 3 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 77035a746f60..4d2994d38fb9 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1978,6 +1978,7 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, spin_unlock_bh(&ep->ex_lock); return sp; err: + fc_fcp_ddp_done(fr_fsp(fp)); rc = fc_exch_done_locked(ep); spin_unlock_bh(&ep->ex_lock); if (!rc) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 2a3a4720a771..f880d40d4e78 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -312,7 +312,7 @@ void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid) * DDP related resources for a fcp_pkt * @fsp: The FCP packet that DDP had been used on */ -static void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp) +void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp) { struct fc_lport *lport; diff --git a/drivers/scsi/libfc/fc_libfc.h b/drivers/scsi/libfc/fc_libfc.h index fedc819d70c0..c7d071289af5 100644 --- a/drivers/scsi/libfc/fc_libfc.h +++ b/drivers/scsi/libfc/fc_libfc.h @@ -108,6 +108,7 @@ extern struct fc4_prov fc_rport_fcp_init; /* FCP initiator provider */ * Set up direct-data placement for this I/O request */ void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid); +void fc_fcp_ddp_done(struct fc_fcp_pkt *fsp); /* * Module setup functions -- cgit v1.2.3 From 8d23f4ba38f399a6169613c6f158e39691aa694f Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Mon, 16 May 2011 16:45:45 -0700 Subject: [SCSI] libfc: don't call resp handler after FC_EX_TIMEOUT In cases exch is already timed out then exch layer could end up calling resp handler again for its response frame received after timeout, though in this case fc_exch_timeout handler would have already called resp with FC_EX_TIMEOUT. This would cause REC response handler to release its fsp pkt hold twice instead once and possibly similar issues with other ELS exchanges in this race. To avoid this race have resp updated under exch lock in rx path, the resp would get set to NULL in case of FC_EX_TIMEOUT under the same lock to prevent resp callback after FC_EX_TIMEOUT. Signed-off-by: Vasu Dev Tested-by: Ross Brattain Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_exch.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 4d2994d38fb9..3b8a6451ea28 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -1434,6 +1434,7 @@ static void fc_exch_recv_seq_resp(struct fc_exch_mgr *mp, struct fc_frame *fp) (f_ctl & (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) == (FC_FC_LAST_SEQ | FC_FC_END_SEQ)) { spin_lock_bh(&ep->ex_lock); + resp = ep->resp; rc = fc_exch_done_locked(ep); WARN_ON(fc_seq_exch(sp) != ep); spin_unlock_bh(&ep->ex_lock); -- cgit v1.2.3 From 0a219edb263ef93e4fd7a83804bea667e72a7bfa Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Mon, 16 May 2011 16:45:51 -0700 Subject: [SCSI] libfc: fix race in SRR response In this case fsp was freed before error handler was invoked, this is fixed by having SRR fsp reference freed by exch destructor so that fsp will be always held until it exch is freed. Also don't reset fsp->recov_seq since this is needed by SRR error handler to do exch done. Signed-off-by: Vasu Dev Tested-by: Ross Brattain Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_fcp.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index f880d40d4e78..57704e814681 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -1673,7 +1673,8 @@ static void fc_fcp_srr(struct fc_fcp_pkt *fsp, enum fc_rctl r_ctl, u32 offset) FC_FCTL_REQ, 0); rec_tov = get_fsp_rec_tov(fsp); - seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, NULL, + seq = lport->tt.exch_seq_send(lport, fp, fc_fcp_srr_resp, + fc_fcp_pkt_destroy, fsp, jiffies_to_msecs(rec_tov)); if (!seq) goto retry; @@ -1720,7 +1721,6 @@ static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) return; } - fsp->recov_seq = NULL; switch (fc_frame_payload_op(fp)) { case ELS_LS_ACC: fsp->recov_retry = 0; @@ -1732,10 +1732,9 @@ static void fc_fcp_srr_resp(struct fc_seq *seq, struct fc_frame *fp, void *arg) break; } fc_fcp_unlock_pkt(fsp); - fsp->lp->tt.exch_done(seq); out: + fsp->lp->tt.exch_done(seq); fc_frame_free(fp); - fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */ } /** @@ -1747,8 +1746,6 @@ static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) { if (fc_fcp_lock_pkt(fsp)) goto out; - fsp->lp->tt.exch_done(fsp->recov_seq); - fsp->recov_seq = NULL; switch (PTR_ERR(fp)) { case -FC_EX_TIMEOUT: if (fsp->recov_retry++ < FC_MAX_RECOV_RETRY) @@ -1764,7 +1761,7 @@ static void fc_fcp_srr_error(struct fc_fcp_pkt *fsp, struct fc_frame *fp) } fc_fcp_unlock_pkt(fsp); out: - fc_fcp_pkt_release(fsp); /* drop hold for outstanding SRR */ + fsp->lp->tt.exch_done(fsp->recov_seq); } /** -- cgit v1.2.3 From 8467b96c035a45418c5db2619f396b7131b4efa8 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Mon, 16 May 2011 16:45:57 -0700 Subject: [SCSI] libfc: do not immediately retry the cmd when seq_send fails in fc_fcp_send_data Currently, when seq_send() fails in fc_fcp_send_data(), fc_fcp_retry_cmd() would complete this failed I/O directly and let scsi-ml retry. However, target side is not notified which may hang the target. Instead, we should just bail out from from fc_fcp_send_data and let scsi-ml times it out and aborts this I/O instead. Signed-off-by: Yi Zou Tested-by: Ross Brattain Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_fcp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index 57704e814681..9cd2149519ac 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -681,8 +681,7 @@ static int fc_fcp_send_data(struct fc_fcp_pkt *fsp, struct fc_seq *seq, error = lport->tt.seq_send(lport, seq, fp); if (error) { WARN_ON(1); /* send error should be rare */ - fc_fcp_retry_cmd(fsp); - return 0; + return error; } fp = NULL; } -- cgit v1.2.3 From d85e607b344d8fcd644456508a5bbe63ce011221 Mon Sep 17 00:00:00 2001 From: Robert Love Date: Mon, 16 May 2011 16:46:02 -0700 Subject: [SCSI] libfcoe: Remove unnecessary module state checks libfcoe's interface consists of create, destroy, enable, disable and create_vn2vn. These are currently module paramaters added durring the module initialization. A concern arose that the module parameters were being added with write permissions before the module had completed initialization. The following code was added to each sysfs store file. * Make sure the module has been initialized, and is not about to be * removed. Module parameter sysfs files are writable before the * module_init function is called and after module_exit. */ if (THIS_MODULE->state != MODULE_STATE_LIVE) goto out_nodev; This check was called out as unhelpful as the module can go dead at any time and therefore its state isn't a reliable thing to look at as a sign of stability and initialization completion. Also, that functional interfaces like these should be added after module initialization. This patch removes the unnecessary checks and hopes to disprove the concern about initialization ordering. Recent fcoe transport rework changes now require fcoe transports to register with libfcoe before any operation can take place. libfcoe may access some static variables but nothing that could cause a problem. Once a fcoe transport is registered, libfcoe is usable and any interface calls will be functional. Signed-off-by: Robert Love Tested-by: Ross Brattain Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe_transport.c | 40 -------------------------------------- 1 file changed, 40 deletions(-) diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c index f81f77c8569e..41068e8748e7 100644 --- a/drivers/scsi/fcoe/fcoe_transport.c +++ b/drivers/scsi/fcoe/fcoe_transport.c @@ -544,16 +544,6 @@ static int fcoe_transport_create(const char *buffer, struct kernel_param *kp) struct fcoe_transport *ft = NULL; enum fip_state fip_mode = (enum fip_state)(long)kp->arg; -#ifdef CONFIG_LIBFCOE_MODULE - /* - * Make sure the module has been initialized, and is not about to be - * removed. Module parameter sysfs files are writable before the - * module_init function is called and after module_exit. - */ - if (THIS_MODULE->state != MODULE_STATE_LIVE) - goto out_nodev; -#endif - mutex_lock(&ft_mutex); netdev = fcoe_if_to_netdev(buffer); @@ -618,16 +608,6 @@ static int fcoe_transport_destroy(const char *buffer, struct kernel_param *kp) struct net_device *netdev = NULL; struct fcoe_transport *ft = NULL; -#ifdef CONFIG_LIBFCOE_MODULE - /* - * Make sure the module has been initialized, and is not about to be - * removed. Module parameter sysfs files are writable before the - * module_init function is called and after module_exit. - */ - if (THIS_MODULE->state != MODULE_STATE_LIVE) - goto out_nodev; -#endif - mutex_lock(&ft_mutex); netdev = fcoe_if_to_netdev(buffer); @@ -672,16 +652,6 @@ static int fcoe_transport_disable(const char *buffer, struct kernel_param *kp) struct net_device *netdev = NULL; struct fcoe_transport *ft = NULL; -#ifdef CONFIG_LIBFCOE_MODULE - /* - * Make sure the module has been initialized, and is not about to be - * removed. Module parameter sysfs files are writable before the - * module_init function is called and after module_exit. - */ - if (THIS_MODULE->state != MODULE_STATE_LIVE) - goto out_nodev; -#endif - mutex_lock(&ft_mutex); netdev = fcoe_if_to_netdev(buffer); @@ -720,16 +690,6 @@ static int fcoe_transport_enable(const char *buffer, struct kernel_param *kp) struct net_device *netdev = NULL; struct fcoe_transport *ft = NULL; -#ifdef CONFIG_LIBFCOE_MODULE - /* - * Make sure the module has been initialized, and is not about to be - * removed. Module parameter sysfs files are writable before the - * module_init function is called and after module_exit. - */ - if (THIS_MODULE->state != MODULE_STATE_LIVE) - goto out_nodev; -#endif - mutex_lock(&ft_mutex); netdev = fcoe_if_to_netdev(buffer); -- cgit v1.2.3 From a5442ba4a428081ebac7090f46c62ffaa17ca951 Mon Sep 17 00:00:00 2001 From: Wayne Boyer Date: Tue, 17 May 2011 09:18:53 -0700 Subject: [SCSI] ipr: fix possible false positive detection of stuck interrupt If the driver is getting flooded with interrupts, there's a possibility that the interrupt service routine could falsely detect a stuck interrupt condition and reset the adapter. This patch changes the logic such that the routine will loop back into the command processing code one more time after detecting the stuck interrupt signature. If there are no commands to process after that pass, and the interrupt is still not cleared, then the driver will print the "Error clearing HRRQ" message and reset the adapter. Signed-off-by: Wayne Boyer Acked-by: Brian King Signed-off-by: James Bottomley --- drivers/scsi/ipr.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 12868ca46110..888086c4e709 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -5149,21 +5149,21 @@ static irqreturn_t ipr_isr(int irq, void *devp) if (ipr_cmd != NULL) { /* Clear the PCI interrupt */ + num_hrrq = 0; do { writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32); int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); } while (int_reg & IPR_PCII_HRRQ_UPDATED && num_hrrq++ < IPR_MAX_HRRQ_RETRIES); - if (int_reg & IPR_PCII_HRRQ_UPDATED) { - ipr_isr_eh(ioa_cfg, "Error clearing HRRQ"); - spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - return IRQ_HANDLED; - } - } else if (rc == IRQ_NONE && irq_none == 0) { int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); irq_none++; + } else if (num_hrrq == IPR_MAX_HRRQ_RETRIES && + int_reg & IPR_PCII_HRRQ_UPDATED) { + ipr_isr_eh(ioa_cfg, "Error clearing HRRQ"); + spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); + return IRQ_HANDLED; } else break; } -- cgit v1.2.3 From 45d7f0cc58183062adea0a1de3d8cba768134138 Mon Sep 17 00:00:00 2001 From: Jing Huang Date: Wed, 13 Apr 2011 11:45:53 -0700 Subject: [SCSI] bfa: kdump fix Root cause: When kernel crashes, bfa IOC state machine and FW doesn't get a notification and hence are not cleanly shutdown. So registers holding driver/IOC state information are not reset back to valid disabled/parking values. This causes subsequent driver initialization to hang during kdump kernel boot. Fix description: during the initialization of first PCI function, reset corresponding register when unclean shutown is detect by reading chip registers. This will make sure that ioc/fw gets clean re-initialization. Signed-off-by: Jing Huang Signed-off-by: James Bottomley --- drivers/scsi/bfa/bfa_ioc.c | 4 +++- drivers/scsi/bfa/bfa_ioc.h | 1 + drivers/scsi/bfa/bfa_ioc_cb.c | 11 +++++++++++ drivers/scsi/bfa/bfa_ioc_ct.c | 26 ++++++++++++++++++++++++++ 4 files changed, 41 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/bfa/bfa_ioc.c b/drivers/scsi/bfa/bfa_ioc.c index c1f72c49196f..6c7e0339dda4 100644 --- a/drivers/scsi/bfa/bfa_ioc.c +++ b/drivers/scsi/bfa/bfa_ioc.c @@ -56,6 +56,8 @@ BFA_TRC_FILE(CNA, IOC); #define bfa_ioc_map_port(__ioc) ((__ioc)->ioc_hwif->ioc_map_port(__ioc)) #define bfa_ioc_notify_fail(__ioc) \ ((__ioc)->ioc_hwif->ioc_notify_fail(__ioc)) +#define bfa_ioc_sync_start(__ioc) \ + ((__ioc)->ioc_hwif->ioc_sync_start(__ioc)) #define bfa_ioc_sync_join(__ioc) \ ((__ioc)->ioc_hwif->ioc_sync_join(__ioc)) #define bfa_ioc_sync_leave(__ioc) \ @@ -647,7 +649,7 @@ bfa_iocpf_sm_fwcheck(struct bfa_iocpf_s *iocpf, enum iocpf_event event) switch (event) { case IOCPF_E_SEMLOCKED: if (bfa_ioc_firmware_lock(ioc)) { - if (bfa_ioc_sync_complete(ioc)) { + if (bfa_ioc_sync_start(ioc)) { iocpf->retry_count = 0; bfa_ioc_sync_join(ioc); bfa_fsm_set_state(iocpf, bfa_iocpf_sm_hwinit); diff --git a/drivers/scsi/bfa/bfa_ioc.h b/drivers/scsi/bfa/bfa_ioc.h index ec9cf08b0e7f..c85182a704fb 100644 --- a/drivers/scsi/bfa/bfa_ioc.h +++ b/drivers/scsi/bfa/bfa_ioc.h @@ -263,6 +263,7 @@ struct bfa_ioc_hwif_s { bfa_boolean_t msix); void (*ioc_notify_fail) (struct bfa_ioc_s *ioc); void (*ioc_ownership_reset) (struct bfa_ioc_s *ioc); + bfa_boolean_t (*ioc_sync_start) (struct bfa_ioc_s *ioc); void (*ioc_sync_join) (struct bfa_ioc_s *ioc); void (*ioc_sync_leave) (struct bfa_ioc_s *ioc); void (*ioc_sync_ack) (struct bfa_ioc_s *ioc); diff --git a/drivers/scsi/bfa/bfa_ioc_cb.c b/drivers/scsi/bfa/bfa_ioc_cb.c index e4a0713185b6..89ae4c8f95a2 100644 --- a/drivers/scsi/bfa/bfa_ioc_cb.c +++ b/drivers/scsi/bfa/bfa_ioc_cb.c @@ -32,6 +32,7 @@ static void bfa_ioc_cb_map_port(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix); static void bfa_ioc_cb_notify_fail(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_ownership_reset(struct bfa_ioc_s *ioc); +static bfa_boolean_t bfa_ioc_cb_sync_start(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_sync_join(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_sync_leave(struct bfa_ioc_s *ioc); static void bfa_ioc_cb_sync_ack(struct bfa_ioc_s *ioc); @@ -53,6 +54,7 @@ bfa_ioc_set_cb_hwif(struct bfa_ioc_s *ioc) hwif_cb.ioc_isr_mode_set = bfa_ioc_cb_isr_mode_set; hwif_cb.ioc_notify_fail = bfa_ioc_cb_notify_fail; hwif_cb.ioc_ownership_reset = bfa_ioc_cb_ownership_reset; + hwif_cb.ioc_sync_start = bfa_ioc_cb_sync_start; hwif_cb.ioc_sync_join = bfa_ioc_cb_sync_join; hwif_cb.ioc_sync_leave = bfa_ioc_cb_sync_leave; hwif_cb.ioc_sync_ack = bfa_ioc_cb_sync_ack; @@ -194,6 +196,15 @@ bfa_ioc_cb_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix) { } +/* + * Synchronized IOC failure processing routines + */ +static bfa_boolean_t +bfa_ioc_cb_sync_start(struct bfa_ioc_s *ioc) +{ + return bfa_ioc_cb_sync_complete(ioc); +} + /* * Cleanup hw semaphore and usecnt registers */ diff --git a/drivers/scsi/bfa/bfa_ioc_ct.c b/drivers/scsi/bfa/bfa_ioc_ct.c index 008d129ddfcd..93612520f0d2 100644 --- a/drivers/scsi/bfa/bfa_ioc_ct.c +++ b/drivers/scsi/bfa/bfa_ioc_ct.c @@ -41,6 +41,7 @@ static void bfa_ioc_ct_map_port(struct bfa_ioc_s *ioc); static void bfa_ioc_ct_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix); static void bfa_ioc_ct_notify_fail(struct bfa_ioc_s *ioc); static void bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc); +static bfa_boolean_t bfa_ioc_ct_sync_start(struct bfa_ioc_s *ioc); static void bfa_ioc_ct_sync_join(struct bfa_ioc_s *ioc); static void bfa_ioc_ct_sync_leave(struct bfa_ioc_s *ioc); static void bfa_ioc_ct_sync_ack(struct bfa_ioc_s *ioc); @@ -62,6 +63,7 @@ bfa_ioc_set_ct_hwif(struct bfa_ioc_s *ioc) hwif_ct.ioc_isr_mode_set = bfa_ioc_ct_isr_mode_set; hwif_ct.ioc_notify_fail = bfa_ioc_ct_notify_fail; hwif_ct.ioc_ownership_reset = bfa_ioc_ct_ownership_reset; + hwif_ct.ioc_sync_start = bfa_ioc_ct_sync_start; hwif_ct.ioc_sync_join = bfa_ioc_ct_sync_join; hwif_ct.ioc_sync_leave = bfa_ioc_ct_sync_leave; hwif_ct.ioc_sync_ack = bfa_ioc_ct_sync_ack; @@ -351,6 +353,30 @@ bfa_ioc_ct_ownership_reset(struct bfa_ioc_s *ioc) writel(1, ioc->ioc_regs.ioc_sem_reg); } +static bfa_boolean_t +bfa_ioc_ct_sync_start(struct bfa_ioc_s *ioc) +{ + uint32_t r32 = readl(ioc->ioc_regs.ioc_fail_sync); + uint32_t sync_reqd = bfa_ioc_ct_get_sync_reqd(r32); + + /* + * Driver load time. If the sync required bit for this PCI fn + * is set, it is due to an unclean exit by the driver for this + * PCI fn in the previous incarnation. Whoever comes here first + * should clean it up, no matter which PCI fn. + */ + + if (sync_reqd & bfa_ioc_ct_sync_pos(ioc)) { + writel(0, ioc->ioc_regs.ioc_fail_sync); + writel(1, ioc->ioc_regs.ioc_usage_reg); + writel(BFI_IOC_UNINIT, ioc->ioc_regs.ioc_fwstate); + writel(BFI_IOC_UNINIT, ioc->ioc_regs.alt_ioc_fwstate); + return BFA_TRUE; + } + + return bfa_ioc_ct_sync_complete(ioc); +} + /* * Synchronized IOC failure processing routines */ -- cgit v1.2.3 From 2a8cfad06ebbb68e8c113a39bdd653297fb9369c Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 18 May 2011 00:31:07 -0400 Subject: [SCSI] sd: Unmap discard alignment needs to be converted to bytes The block layer discard alignment is reported in bytes, not in units of the logical block size. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index bd0806e64e85..1c69c14be0cd 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -490,7 +490,8 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode) unsigned int max_blocks = 0; q->limits.discard_zeroes_data = sdkp->lbprz; - q->limits.discard_alignment = sdkp->unmap_alignment; + q->limits.discard_alignment = sdkp->unmap_alignment * + logical_block_size; q->limits.discard_granularity = max(sdkp->physical_block_size, sdkp->unmap_granularity * logical_block_size); -- cgit v1.2.3 From 756aca7edd37611b73e1e86ea64a67b62d251509 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 18 May 2011 00:45:22 -0400 Subject: [SCSI] mpt2sas: Fix missing reference tag seed with Type 2 devices Ensure that the initial reference tag is passed on to the HBA firmware for DIF Type 2 devices. Signed-off-by: Martin K. Petersen Acked-by: Kashyap Desai Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index e97363c75074..a7dbc6825f5f 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -3502,6 +3502,7 @@ _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request) switch (prot_type) { case SCSI_PROT_DIF_TYPE1: + case SCSI_PROT_DIF_TYPE2: /* * enable ref/guard checking @@ -3514,13 +3515,6 @@ _scsih_setup_eedp(struct scsi_cmnd *scmd, Mpi2SCSIIORequest_t *mpi_request) cpu_to_be32(scsi_get_lba(scmd)); break; - case SCSI_PROT_DIF_TYPE2: - - eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG | - MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG | - MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD; - break; - case SCSI_PROT_DIF_TYPE3: /* -- cgit v1.2.3 From c498bf1a1bd4e4a9140045b747cafe6386bc59a5 Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Wed, 18 May 2011 00:46:34 -0400 Subject: [SCSI] scsi_trace: Decode UNMAP bit in WRITE SAME(10) As of SBC3r26 WRITE SAME(10) supports the UNMAP bit. Signed-off-by: Martin K. Petersen Signed-off-by: James Bottomley --- drivers/scsi/scsi_trace.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/scsi/scsi_trace.c b/drivers/scsi/scsi_trace.c index b587289cfacb..2bea4f0b684a 100644 --- a/drivers/scsi/scsi_trace.c +++ b/drivers/scsi/scsi_trace.c @@ -59,6 +59,10 @@ scsi_trace_rw10(struct trace_seq *p, unsigned char *cdb, int len) trace_seq_printf(p, "lba=%llu txlen=%llu protect=%u", (unsigned long long)lba, (unsigned long long)txlen, cdb[1] >> 5); + + if (cdb[0] == WRITE_SAME) + trace_seq_printf(p, " unmap=%u", cdb[1] >> 3 & 1); + trace_seq_putc(p, 0); return ret; -- cgit v1.2.3 From 185f107ef9913d9263bc9c2014d16a5a65c4894e Mon Sep 17 00:00:00 2001 From: Prasanna Mumbai Date: Tue, 17 May 2011 23:17:03 -0700 Subject: [SCSI] qla4xxx: update function qla4xxx_isr_decode_mailbox() - Added MBOX_ASTS_DUPLICATE_IP AEN handling. - Update MBOX_AEN_REG_COUNT to 8 so that driver will save status of all mbox registers in aen_q Signed-off-by: Prasanna Mumbai Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 2 +- drivers/scsi/qla4xxx/ql4_isr.c | 13 ++++++++----- 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 4757878d59dd..75edfba92f48 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -115,7 +115,7 @@ #define INVALID_ENTRY 0xFFFF #define MAX_CMDS_TO_RISC 1024 #define MAX_SRBS MAX_CMDS_TO_RISC -#define MBOX_AEN_REG_COUNT 5 +#define MBOX_AEN_REG_COUNT 8 #define MAX_INIT_RETRIES 5 /* diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index 2f40ac761cd4..67d6651cdb36 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -541,6 +541,7 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, case MBOX_ASTS_UNSOLICITED_PDU_RECEIVED: /* Connection mode */ case MBOX_ASTS_IPSEC_SYSTEM_FATAL_ERROR: case MBOX_ASTS_SUBNET_STATE_CHANGE: + case MBOX_ASTS_DUPLICATE_IP: /* No action */ DEBUG2(printk("scsi%ld: AEN %04x\n", ha->host_no, mbox_status)); @@ -593,11 +594,13 @@ static void qla4xxx_isr_decode_mailbox(struct scsi_qla_host * ha, mbox_sts[i]; /* print debug message */ - DEBUG2(printk("scsi%ld: AEN[%d] %04x queued" - " mb1:0x%x mb2:0x%x mb3:0x%x mb4:0x%x\n", - ha->host_no, ha->aen_in, mbox_sts[0], - mbox_sts[1], mbox_sts[2], mbox_sts[3], - mbox_sts[4])); + DEBUG2(printk("scsi%ld: AEN[%d] %04x queued " + "mb1:0x%x mb2:0x%x mb3:0x%x " + "mb4:0x%x mb5:0x%x\n", + ha->host_no, ha->aen_in, + mbox_sts[0], mbox_sts[1], + mbox_sts[2], mbox_sts[3], + mbox_sts[4], mbox_sts[5])); /* advance pointer */ ha->aen_in++; -- cgit v1.2.3 From cb74428ee3811d7749d07e00161336ba9f98b394 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Tue, 17 May 2011 23:17:04 -0700 Subject: [SCSI] qla4xxx: Updated the reset sequence for ISP82xx Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_nx.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 35381cb0936e..e1085edd1779 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -943,12 +943,26 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) /* Halt all the indiviual PEGs and other blocks of the ISP */ qla4_8xxx_rom_lock(ha); - /* mask all niu interrupts */ + /* disable all I2Q */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x10, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x14, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x18, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x1c, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x20, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_I2Q + 0x24, 0x0); + + /* disable all niu interrupts */ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x40, 0xff); /* disable xge rx/tx */ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x70000, 0x00); /* disable xg1 rx/tx */ qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x80000, 0x00); + /* disable sideband mac */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0x90000, 0x00); + /* disable ap0 mac */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0xa0000, 0x00); + /* disable ap1 mac */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_NIU + 0xb0000, 0x00); /* halt sre */ val = qla4_8xxx_rd_32(ha, QLA82XX_CRB_SRE + 0x1000); @@ -963,6 +977,7 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x10, 0x0); qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x18, 0x0); qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x100, 0x0); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_TIMER + 0x200, 0x0); /* halt pegs */ qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_0 + 0x3c, 1); @@ -970,9 +985,9 @@ qla4_8xxx_pinit_from_rom(struct scsi_qla_host *ha, int verbose) qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_2 + 0x3c, 1); qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_3 + 0x3c, 1); qla4_8xxx_wr_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c, 1); + msleep(5); /* big hammer */ - msleep(1000); if (test_bit(DPC_RESET_HA, &ha->dpc_flags)) /* don't reset CAM block on reset */ qla4_8xxx_wr_32(ha, QLA82XX_ROMUSB_GLB_SW_RESET, 0xfeffffff); -- cgit v1.2.3 From 68d92ebf598e205619dea753a9a990aef4ab8f7a Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Tue, 17 May 2011 23:17:05 -0700 Subject: [SCSI] qla4xxx: Dump HW/FW reg to figure out what caused FW to be hung for ISP82XX Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_os.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index c22f2a764d9d..b657ecec46fa 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -679,7 +679,27 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha) if (ha->seconds_since_last_heartbeat == 2) { ha->seconds_since_last_heartbeat = 0; halt_status = qla4_8xxx_rd_32(ha, - QLA82XX_PEG_HALT_STATUS1); + QLA82XX_PEG_HALT_STATUS1); + + ql4_printk(KERN_INFO, ha, + "scsi(%ld): %s, Dumping hw/fw registers:\n " + " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2:" + " 0x%x,\n PEG_NET_0_PC: 0x%x, PEG_NET_1_PC:" + " 0x%x,\n PEG_NET_2_PC: 0x%x, PEG_NET_3_PC:" + " 0x%x,\n PEG_NET_4_PC: 0x%x\n", + ha->host_no, __func__, halt_status, + qla4_8xxx_rd_32(ha, + QLA82XX_PEG_HALT_STATUS2), + qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_0 + + 0x3c), + qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_1 + + 0x3c), + qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_2 + + 0x3c), + qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_3 + + 0x3c), + qla4_8xxx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 + + 0x3c)); /* Since we cannot change dev_state in interrupt * context, set appropriate DPC flag then wakeup -- cgit v1.2.3 From 6d78bd56be54286a72413db82d87fc371867629f Mon Sep 17 00:00:00 2001 From: Prasanna Mumbai Date: Tue, 17 May 2011 23:17:06 -0700 Subject: [SCSI] qla4xxx: Complete the cmd if sense_len is zero Complete the cmd if sense length is zero. For cases where sense data spans across multiple iocb's by FW, we need to hold on to the I/O (ha->status_srb != NULL) till we have processed them all and copied the sense data from internal buffer to scsi_cmd sense buffer. Signed-off-by: Prasanna Mumbai Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_isr.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index 67d6651cdb36..0e72921c752d 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -25,9 +25,14 @@ static void qla4xxx_copy_sense(struct scsi_qla_host *ha, memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); sense_len = le16_to_cpu(sts_entry->senseDataByteCnt); - if (sense_len == 0) + if (sense_len == 0) { + DEBUG2(ql4_printk(KERN_INFO, ha, "scsi%ld:%d:%d:%d: %s:" + " sense len 0\n", ha->host_no, + cmd->device->channel, cmd->device->id, + cmd->device->lun, __func__)); + ha->status_srb = NULL; return; - + } /* Save total available sense length, * not to exceed cmd's sense buffer size */ sense_len = min_t(uint16_t, sense_len, SCSI_SENSE_BUFFERSIZE); -- cgit v1.2.3 From 0160ef12693cf1614f602051474792c5b71c639f Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Tue, 17 May 2011 23:17:07 -0700 Subject: [SCSI] qla4xxx: Don't process mbx interrupt unconditionally Do not process interrupt unconditionally during mailbox processing which can lead to spurious interrupt. Mailbox completion are now polled if interrupt are disabled or wait for interrupt to come in if its enabled Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_mbx.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index d78b58dc5011..b768a0366f7b 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -86,22 +86,8 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, msleep(10); } - /* To prevent overwriting mailbox registers for a command that has - * not yet been serviced, check to see if an active command - * (AEN, IOCB, etc.) is interrupting, then service it. - * ----------------------------------------------------------------- - */ spin_lock_irqsave(&ha->hardware_lock, flags); - if (!is_qla8022(ha)) { - intr_status = readl(&ha->reg->ctrl_status); - if (intr_status & CSR_SCSI_PROCESSOR_INTR) { - /* Service existing interrupt */ - ha->isp_ops->interrupt_service_routine(ha, intr_status); - clear_bit(AF_MBOX_COMMAND_DONE, &ha->flags); - } - } - ha->mbox_status_count = outCount; for (i = 0; i < outCount; i++) ha->mbox_status[i] = 0; -- cgit v1.2.3 From 977f46a4bb58e2a8f4d287db311084e24c502b77 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Tue, 17 May 2011 23:17:08 -0700 Subject: [SCSI] qla4xxx: Don't check FW alive if ISP82XX reset is in progress Corrected logic to don't check for F/W is alive if reset is already in progress for ISP82XX Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_os.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index b657ecec46fa..302938ed2015 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -735,7 +735,7 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) /* don't poll if reset is going on */ if (!(test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags) || test_bit(DPC_RESET_HA, &ha->dpc_flags) || - test_bit(DPC_RESET_ACTIVE, &ha->dpc_flags))) { + test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags))) { if (dev_state == QLA82XX_DEV_NEED_RESET && !test_bit(DPC_RESET_HA, &ha->dpc_flags)) { if (!ql4xdontresethba) { -- cgit v1.2.3 From 1b46807e0bc6160449ce04a207fa98a694bc443c Mon Sep 17 00:00:00 2001 From: Lalit Chandivade Date: Tue, 17 May 2011 23:17:09 -0700 Subject: [SCSI] qla4xxx: Remove AF_DPC_SCHEDULED flag from ha. Since queue_work does not requeue, there is no need to check if a work is in progress using the AF_DPC_SCHEDULED flag. queue_work would return if work is pending without adding the work, do_dpc would again get invoked from qla4xxx_timer if there is still DPC flags set. Signed-off-by: Lalit Chandivade Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 1 - drivers/scsi/qla4xxx/ql4_os.c | 17 +++++------------ 2 files changed, 5 insertions(+), 13 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 75edfba92f48..8e3a28e300a4 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -368,7 +368,6 @@ struct scsi_qla_host { #define AF_INIT_DONE 1 /* 0x00000002 */ #define AF_MBOX_COMMAND 2 /* 0x00000004 */ #define AF_MBOX_COMMAND_DONE 3 /* 0x00000008 */ -#define AF_DPC_SCHEDULED 5 /* 0x00000020 */ #define AF_INTERRUPTS_ON 6 /* 0x00000040 */ #define AF_GET_CRASH_RECORD 7 /* 0x00000080 */ #define AF_LINK_UP 8 /* 0x00000100 */ diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 302938ed2015..9c1c8453d6c7 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -859,7 +859,7 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) } /* Wakeup the dpc routine for this adapter, if needed. */ - if ((start_dpc || + if (start_dpc || test_bit(DPC_RESET_HA, &ha->dpc_flags) || test_bit(DPC_RETRY_RESET_HA, &ha->dpc_flags) || test_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags) || @@ -869,9 +869,7 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) test_bit(DPC_LINK_CHANGED, &ha->dpc_flags) || test_bit(DPC_HA_UNRECOVERABLE, &ha->dpc_flags) || test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags) || - test_bit(DPC_AEN, &ha->dpc_flags)) && - !test_bit(AF_DPC_SCHEDULED, &ha->flags) && - ha->dpc_thread) { + test_bit(DPC_AEN, &ha->dpc_flags)) { DEBUG2(printk("scsi%ld: %s: scheduling dpc routine" " - dpc flags = 0x%lx\n", ha->host_no, __func__, ha->dpc_flags)); @@ -1261,11 +1259,8 @@ static void qla4xxx_relogin_all_devices(struct scsi_qla_host *ha) void qla4xxx_wake_dpc(struct scsi_qla_host *ha) { - if (ha->dpc_thread && - !test_bit(AF_DPC_SCHEDULED, &ha->flags)) { - set_bit(AF_DPC_SCHEDULED, &ha->flags); + if (ha->dpc_thread) queue_work(ha->dpc_thread, &ha->dpc_work); - } } /** @@ -1292,12 +1287,12 @@ static void qla4xxx_do_dpc(struct work_struct *work) /* Initialization not yet finished. Don't do anything yet. */ if (!test_bit(AF_INIT_DONE, &ha->flags)) - goto do_dpc_exit; + return; if (test_bit(AF_EEH_BUSY, &ha->flags)) { DEBUG2(printk(KERN_INFO "scsi%ld: %s: flags = %lx\n", ha->host_no, __func__, ha->flags)); - goto do_dpc_exit; + return; } if (is_qla8022(ha)) { @@ -1404,8 +1399,6 @@ dpc_post_reset_ha: } } -do_dpc_exit: - clear_bit(AF_DPC_SCHEDULED, &ha->flags); } /** -- cgit v1.2.3 From 8f0722cae6a799e0cd5f1eb5ed4569a11f8dcf79 Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Tue, 17 May 2011 23:17:10 -0700 Subject: [SCSI] qla4xxx: Remove host_lock in queuecommand function Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_os.c | 26 +++++++------------------- 1 file changed, 7 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 9c1c8453d6c7..9bfe9ce28740 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -412,8 +412,7 @@ void qla4xxx_mark_all_devices_missing(struct scsi_qla_host *ha) static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry, - struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) + struct scsi_cmnd *cmd) { struct srb *srb; @@ -427,7 +426,6 @@ static struct srb* qla4xxx_get_new_srb(struct scsi_qla_host *ha, srb->cmd = cmd; srb->flags = 0; CMD_SP(cmd) = (void *)srb; - cmd->scsi_done = done; return srb; } @@ -458,9 +456,8 @@ void qla4xxx_srb_compl(struct kref *ref) /** * qla4xxx_queuecommand - scsi layer issues scsi command to driver. + * @host: scsi host * @cmd: Pointer to Linux's SCSI command structure - * @done_fn: Function that the driver calls to notify the SCSI mid-layer - * that the command has been processed. * * Remarks: * This routine is invoked by Linux to send a SCSI command to the driver. @@ -470,10 +467,9 @@ void qla4xxx_srb_compl(struct kref *ref) * completion handling). Unfortunely, it sometimes calls the scheduler * in interrupt context which is a big NO! NO!. **/ -static int qla4xxx_queuecommand_lck(struct scsi_cmnd *cmd, - void (*done)(struct scsi_cmnd *)) +static int qla4xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) { - struct scsi_qla_host *ha = to_qla_host(cmd->device->host); + struct scsi_qla_host *ha = to_qla_host(host); struct ddb_entry *ddb_entry = cmd->device->hostdata; struct iscsi_cls_session *sess = ddb_entry->sess; struct srb *srb; @@ -515,37 +511,29 @@ static int qla4xxx_queuecommand_lck(struct scsi_cmnd *cmd, test_bit(DPC_RESET_HA_FW_CONTEXT, &ha->dpc_flags)) goto qc_host_busy; - spin_unlock_irq(ha->host->host_lock); - - srb = qla4xxx_get_new_srb(ha, ddb_entry, cmd, done); + srb = qla4xxx_get_new_srb(ha, ddb_entry, cmd); if (!srb) - goto qc_host_busy_lock; + goto qc_host_busy; rval = qla4xxx_send_command_to_isp(ha, srb); if (rval != QLA_SUCCESS) goto qc_host_busy_free_sp; - spin_lock_irq(ha->host->host_lock); return 0; qc_host_busy_free_sp: qla4xxx_srb_free_dma(ha, srb); mempool_free(srb, ha->srb_mempool); -qc_host_busy_lock: - spin_lock_irq(ha->host->host_lock); - qc_host_busy: return SCSI_MLQUEUE_HOST_BUSY; qc_fail_command: - done(cmd); + cmd->scsi_done(cmd); return 0; } -static DEF_SCSI_QCMD(qla4xxx_queuecommand) - /** * qla4xxx_mem_free - frees memory allocated to adapter * @ha: Pointer to host adapter structure. -- cgit v1.2.3 From 7ad633c06b6f1498cf26922b165837b121f27519 Mon Sep 17 00:00:00 2001 From: Harish Zunjarrao Date: Tue, 17 May 2011 23:17:11 -0700 Subject: [SCSI] qla4xxx: Added vendor specific sysfs attributes Added fw_version, serial_num, iscsi version and boot loader version sysfs attributes. Signed-off-by: Harish Zunjarrao Signed-off-by: Vikas Chaudhary Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/Makefile | 2 +- drivers/scsi/qla4xxx/ql4_attr.c | 69 +++++++++++++++++++++++++++++++++++++++++ drivers/scsi/qla4xxx/ql4_def.h | 8 +++++ drivers/scsi/qla4xxx/ql4_fw.h | 23 ++++++++++++++ drivers/scsi/qla4xxx/ql4_glbl.h | 3 +- drivers/scsi/qla4xxx/ql4_init.c | 2 +- drivers/scsi/qla4xxx/ql4_mbx.c | 63 ++++++++++++++++++++++++++----------- drivers/scsi/qla4xxx/ql4_os.c | 1 + 8 files changed, 150 insertions(+), 21 deletions(-) create mode 100644 drivers/scsi/qla4xxx/ql4_attr.c diff --git a/drivers/scsi/qla4xxx/Makefile b/drivers/scsi/qla4xxx/Makefile index 0339ff03a535..252523d7847e 100644 --- a/drivers/scsi/qla4xxx/Makefile +++ b/drivers/scsi/qla4xxx/Makefile @@ -1,5 +1,5 @@ qla4xxx-y := ql4_os.o ql4_init.o ql4_mbx.o ql4_iocb.o ql4_isr.o \ - ql4_nx.o ql4_nvram.o ql4_dbg.o + ql4_nx.o ql4_nvram.o ql4_dbg.o ql4_attr.o obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx.o diff --git a/drivers/scsi/qla4xxx/ql4_attr.c b/drivers/scsi/qla4xxx/ql4_attr.c new file mode 100644 index 000000000000..864d018631c0 --- /dev/null +++ b/drivers/scsi/qla4xxx/ql4_attr.c @@ -0,0 +1,69 @@ +/* + * QLogic iSCSI HBA Driver + * Copyright (c) 2003-2011 QLogic Corporation + * + * See LICENSE.qla4xxx for copyright and licensing details. + */ + +#include "ql4_def.h" +#include "ql4_glbl.h" +#include "ql4_dbg.h" + +/* Scsi_Host attributes. */ +static ssize_t +qla4xxx_fw_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev)); + + if (is_qla8022(ha)) + return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d (%x)\n", + ha->firmware_version[0], + ha->firmware_version[1], + ha->patch_number, ha->build_number); + else + return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d.%02d\n", + ha->firmware_version[0], + ha->firmware_version[1], + ha->patch_number, ha->build_number); +} + +static ssize_t +qla4xxx_serial_num_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev)); + return snprintf(buf, PAGE_SIZE, "%s\n", ha->serial_number); +} + +static ssize_t +qla4xxx_iscsi_version_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev)); + return snprintf(buf, PAGE_SIZE, "%d.%02d\n", ha->iscsi_major, + ha->iscsi_minor); +} + +static ssize_t +qla4xxx_optrom_version_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct scsi_qla_host *ha = to_qla_host(class_to_shost(dev)); + return snprintf(buf, PAGE_SIZE, "%d.%02d.%02d.%02d\n", + ha->bootload_major, ha->bootload_minor, + ha->bootload_patch, ha->bootload_build); +} + +static DEVICE_ATTR(fw_version, S_IRUGO, qla4xxx_fw_version_show, NULL); +static DEVICE_ATTR(serial_num, S_IRUGO, qla4xxx_serial_num_show, NULL); +static DEVICE_ATTR(iscsi_version, S_IRUGO, qla4xxx_iscsi_version_show, NULL); +static DEVICE_ATTR(optrom_version, S_IRUGO, qla4xxx_optrom_version_show, NULL); + +struct device_attribute *qla4xxx_host_attrs[] = { + &dev_attr_fw_version, + &dev_attr_serial_num, + &dev_attr_iscsi_version, + &dev_attr_optrom_version, + NULL, +}; diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index 8e3a28e300a4..473c5c872b39 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -583,6 +583,14 @@ struct scsi_qla_host { uint32_t nx_reset_timeout; struct completion mbx_intr_comp; + + /* --- From About Firmware --- */ + uint16_t iscsi_major; + uint16_t iscsi_minor; + uint16_t bootload_major; + uint16_t bootload_minor; + uint16_t bootload_patch; + uint16_t bootload_build; }; static inline int is_ipv4_enabled(struct scsi_qla_host *ha) diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index 31e2bf97198c..01082aa77098 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -690,6 +690,29 @@ struct mbx_sys_info { uint8_t reserved[12]; /* 34-3f */ }; +struct about_fw_info { + uint16_t fw_major; /* 00 - 01 */ + uint16_t fw_minor; /* 02 - 03 */ + uint16_t fw_patch; /* 04 - 05 */ + uint16_t fw_build; /* 06 - 07 */ + uint8_t fw_build_date[16]; /* 08 - 17 ASCII String */ + uint8_t fw_build_time[16]; /* 18 - 27 ASCII String */ + uint8_t fw_build_user[16]; /* 28 - 37 ASCII String */ + uint16_t fw_load_source; /* 38 - 39 */ + /* 1 = Flash Primary, + 2 = Flash Secondary, + 3 = Host Download + */ + uint8_t reserved1[6]; /* 3A - 3F */ + uint16_t iscsi_major; /* 40 - 41 */ + uint16_t iscsi_minor; /* 42 - 43 */ + uint16_t bootload_major; /* 44 - 45 */ + uint16_t bootload_minor; /* 46 - 47 */ + uint16_t bootload_patch; /* 48 - 49 */ + uint16_t bootload_build; /* 4A - 4B */ + uint8_t reserved2[180]; /* 4C - FF */ +}; + struct crash_record { uint16_t fw_major_version; /* 00 - 01 */ uint16_t fw_minor_version; /* 02 - 03 */ diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index cc53e3fbd78c..a53a256c1f8d 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -61,7 +61,7 @@ struct ddb_entry *qla4xxx_alloc_sess(struct scsi_qla_host *ha); int qla4xxx_add_sess(struct ddb_entry *); void qla4xxx_destroy_sess(struct ddb_entry *ddb_entry); int qla4xxx_is_nvram_configuration_valid(struct scsi_qla_host *ha); -int qla4xxx_get_fw_version(struct scsi_qla_host * ha); +int qla4xxx_about_firmware(struct scsi_qla_host *ha); void qla4xxx_interrupt_service_routine(struct scsi_qla_host *ha, uint32_t intr_status); int qla4xxx_init_rings(struct scsi_qla_host *ha); @@ -139,4 +139,5 @@ extern int ql4xextended_error_logging; extern int ql4xdontresethba; extern int ql4xenablemsix; +extern struct device_attribute *qla4xxx_host_attrs[]; #endif /* _QLA4x_GBL_H */ diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 48e2241ddaf4..42ed5db2d530 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -1275,7 +1275,7 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, if (ha->isp_ops->start_firmware(ha) == QLA_ERROR) goto exit_init_hba; - if (qla4xxx_get_fw_version(ha) == QLA_ERROR) + if (qla4xxx_about_firmware(ha) == QLA_ERROR) goto exit_init_hba; if (ha->isp_ops->get_sys_info(ha) == QLA_ERROR) diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index b768a0366f7b..fce8289e9752 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -1043,38 +1043,65 @@ int qla4xxx_get_flash(struct scsi_qla_host * ha, dma_addr_t dma_addr, } /** - * qla4xxx_get_fw_version - gets firmware version + * qla4xxx_about_firmware - gets FW, iscsi draft and boot loader version * @ha: Pointer to host adapter structure. * - * Retrieves the firmware version on HBA. In QLA4010, mailboxes 2 & 3 may - * hold an address for data. Make sure that we write 0 to those mailboxes, - * if unused. + * Retrieves the FW version, iSCSI draft version & bootloader version of HBA. + * Mailboxes 2 & 3 may hold an address for data. Make sure that we write 0 to + * those mailboxes, if unused. **/ -int qla4xxx_get_fw_version(struct scsi_qla_host * ha) +int qla4xxx_about_firmware(struct scsi_qla_host *ha) { + struct about_fw_info *about_fw = NULL; + dma_addr_t about_fw_dma; uint32_t mbox_cmd[MBOX_REG_COUNT]; uint32_t mbox_sts[MBOX_REG_COUNT]; + int status = QLA_ERROR; + + about_fw = dma_alloc_coherent(&ha->pdev->dev, + sizeof(struct about_fw_info), + &about_fw_dma, GFP_KERNEL); + if (!about_fw) { + DEBUG2(ql4_printk(KERN_ERR, ha, "%s: Unable to alloc memory " + "for about_fw\n", __func__)); + return status; + } - /* Get firmware version. */ + memset(about_fw, 0, sizeof(struct about_fw_info)); memset(&mbox_cmd, 0, sizeof(mbox_cmd)); memset(&mbox_sts, 0, sizeof(mbox_sts)); mbox_cmd[0] = MBOX_CMD_ABOUT_FW; - - if (qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, 5, &mbox_cmd[0], &mbox_sts[0]) != - QLA_SUCCESS) { - DEBUG2(printk("scsi%ld: %s: MBOX_CMD_ABOUT_FW failed w/ " - "status %04X\n", ha->host_no, __func__, mbox_sts[0])); - return QLA_ERROR; + mbox_cmd[2] = LSDW(about_fw_dma); + mbox_cmd[3] = MSDW(about_fw_dma); + mbox_cmd[4] = sizeof(struct about_fw_info); + + status = qla4xxx_mailbox_command(ha, MBOX_REG_COUNT, MBOX_REG_COUNT, + &mbox_cmd[0], &mbox_sts[0]); + if (status != QLA_SUCCESS) { + DEBUG2(ql4_printk(KERN_WARNING, ha, "%s: MBOX_CMD_ABOUT_FW " + "failed w/ status %04X\n", __func__, + mbox_sts[0])); + goto exit_about_fw; } - /* Save firmware version information. */ - ha->firmware_version[0] = mbox_sts[1]; - ha->firmware_version[1] = mbox_sts[2]; - ha->patch_number = mbox_sts[3]; - ha->build_number = mbox_sts[4]; + /* Save version information. */ + ha->firmware_version[0] = le16_to_cpu(about_fw->fw_major); + ha->firmware_version[1] = le16_to_cpu(about_fw->fw_minor); + ha->patch_number = le16_to_cpu(about_fw->fw_patch); + ha->build_number = le16_to_cpu(about_fw->fw_build); + ha->iscsi_major = le16_to_cpu(about_fw->iscsi_major); + ha->iscsi_minor = le16_to_cpu(about_fw->iscsi_minor); + ha->bootload_major = le16_to_cpu(about_fw->bootload_major); + ha->bootload_minor = le16_to_cpu(about_fw->bootload_minor); + ha->bootload_patch = le16_to_cpu(about_fw->bootload_patch); + ha->bootload_build = le16_to_cpu(about_fw->bootload_build); + status = QLA_SUCCESS; - return QLA_SUCCESS; +exit_about_fw: + dma_free_coherent(&ha->pdev->dev, sizeof(struct about_fw_info), + about_fw, about_fw_dma); + return status; } static int qla4xxx_get_default_ddb(struct scsi_qla_host *ha, diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 9bfe9ce28740..f2364ec59f03 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -124,6 +124,7 @@ static struct scsi_host_template qla4xxx_driver_template = { .sg_tablesize = SG_ALL, .max_sectors = 0xFFFF, + .shost_attrs = qla4xxx_host_attrs, }; static struct iscsi_transport qla4xxx_iscsi_transport = { -- cgit v1.2.3 From 6b278656f26707d410778d42cd6f789b5c53c41b Mon Sep 17 00:00:00 2001 From: Vikas Chaudhary Date: Tue, 17 May 2011 23:17:12 -0700 Subject: [SCSI] qla4xxx: Update driver version to 5.02.00-k7 Signed-off-by: Vikas Chaudhary Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index 603155769407..610492877253 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k6" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k7" -- cgit v1.2.3 From 7287c63e986fe1a51a89f4bb1327320274a7a741 Mon Sep 17 00:00:00 2001 From: Eddie Wai Date: Mon, 16 May 2011 11:13:18 -0700 Subject: [SCSI] bnx2i: Fixed packet error created when the sq_size is set to 16 The number of chip's internal command cell, which is use to generate SCSI cmd packets to the target, was not initialized correctly by the driver when the sq_size is changed from the default 128. This, in turn, will create a problem where the chip's transmit pipe will erroneously reuse an old command cell that is no longer valid. The fix is to correctly initialize the chip's command cell upon setup. Signed-off-by: Eddie Wai Reviewed-by: Mike Christie Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_hwi.c | 1 + drivers/scsi/bnx2i/bnx2i_iscsi.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index f0b89513faed..a8a2b6b65a3c 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -1274,6 +1274,7 @@ int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba) iscsi_init.dummy_buffer_addr_hi = (u32) ((u64) hba->dummy_buf_dma >> 32); + hba->num_ccell = hba->max_sqes >> 1; hba->ctx_ccell_tasks = ((hba->num_ccell & 0xFFFF) | (hba->max_sqes << 16)); iscsi_init.num_ccells_per_conn = hba->num_ccell; diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index 1809f9ccc4ce..7b4d1d041e2e 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -1208,6 +1208,9 @@ static int bnx2i_task_xmit(struct iscsi_task *task) struct bnx2i_cmd *cmd = task->dd_data; struct iscsi_cmd *hdr = (struct iscsi_cmd *) task->hdr; + if (bnx2i_conn->ep->num_active_cmds + 1 > hba->max_sqes) + return -ENOMEM; + /* * If there is no scsi_cmnd this must be a mgmt task */ -- cgit v1.2.3 From d5307a078bb0288945c900c6f4a2fd77ba6d0817 Mon Sep 17 00:00:00 2001 From: Eddie Wai Date: Mon, 16 May 2011 11:13:19 -0700 Subject: [SCSI] bnx2i: Updated the connection shutdown/cleanup timeout Modified the 10s wait time for inflight offload connections to advance to the next state to 2s based on test result. Modified the 20s shutdown timeout to 30s based on test result. Signed-off-by: Eddie Wai Reviewed-by: Mike Christie Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_init.c | 2 +- drivers/scsi/bnx2i/bnx2i_iscsi.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index 1d24a2819736..6adbdc34a9a5 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -244,7 +244,7 @@ void bnx2i_stop(void *handle) wait_event_interruptible_timeout(hba->eh_wait, (list_empty(&hba->ep_ofld_list) && list_empty(&hba->ep_destroy_list)), - 10 * HZ); + 2 * HZ); /* Wait for all endpoints to be torn down, Chip will be reset once * control returns to network driver. So it is required to cleanup and * release all connection resources before returning from this routine. diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index 7b4d1d041e2e..51a970f3bc70 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -858,7 +858,7 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic) mutex_init(&hba->net_dev_lock); init_waitqueue_head(&hba->eh_wait); if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) { - hba->hba_shutdown_tmo = 20 * HZ; + hba->hba_shutdown_tmo = 30 * HZ; hba->conn_teardown_tmo = 20 * HZ; hba->conn_ctx_destroy_tmo = 6 * HZ; } else { /* 5706/5708/5709 */ -- cgit v1.2.3 From 9ae58e144df1a4ecc91dcd9eea5a3f4a6d13b5fc Mon Sep 17 00:00:00 2001 From: Eddie Wai Date: Mon, 16 May 2011 11:13:20 -0700 Subject: [SCSI] bnx2i: Optimized the iSCSI offload performance Modified the event coalescing code for iSCSI offload to combat both corner cases and optimize performance as follows: 1. Added mechanism to loop back a second time to process any leftover CQEs that was generated by the hardware during the time the driver is busy processing previous CQEs in the bh. This not only helps the performance but also fixes the corner case when no more CQEs are being generated in the pipeline; so those leftover CQEs will get a a chance to be processed. 2. Added ARM_CQE_FP to distinguish between fast path arming versus slow path arming. This change will guarantee that the CQEs will always get a chance to be re-armed during fast path completions. 3. Removed the inline event coalescing division for perf optimization. Also fixed a division-by-zero error when the event_coal_div module param was set to 0. 4. Changed the default SQ WQEs size from 256 to 128 to match chip default. 5. Changed the cmd_per_lun from 32 to 24. Signed-off-by: Eddie Wai Reviewed-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i.h | 16 ++++++++++------ drivers/scsi/bnx2i/bnx2i_hwi.c | 26 ++++++++++++++------------ drivers/scsi/bnx2i/bnx2i_iscsi.c | 8 +++++++- 3 files changed, 31 insertions(+), 19 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h index cfd59023227b..6bdd25a93db9 100644 --- a/drivers/scsi/bnx2i/bnx2i.h +++ b/drivers/scsi/bnx2i/bnx2i.h @@ -66,11 +66,11 @@ #define BD_SPLIT_SIZE 32768 /* min, max & default values for SQ/RQ/CQ size, configurable via' modparam */ -#define BNX2I_SQ_WQES_MIN 16 -#define BNX2I_570X_SQ_WQES_MAX 128 -#define BNX2I_5770X_SQ_WQES_MAX 512 -#define BNX2I_570X_SQ_WQES_DEFAULT 128 -#define BNX2I_5770X_SQ_WQES_DEFAULT 256 +#define BNX2I_SQ_WQES_MIN 16 +#define BNX2I_570X_SQ_WQES_MAX 128 +#define BNX2I_5770X_SQ_WQES_MAX 512 +#define BNX2I_570X_SQ_WQES_DEFAULT 128 +#define BNX2I_5770X_SQ_WQES_DEFAULT 128 #define BNX2I_570X_CQ_WQES_MAX 128 #define BNX2I_5770X_CQ_WQES_MAX 512 @@ -115,6 +115,7 @@ #define BNX2X_MAX_CQS 8 #define CNIC_ARM_CQE 1 +#define CNIC_ARM_CQE_FP 2 #define CNIC_DISARM_CQE 0 #define REG_RD(__hba, offset) \ @@ -666,7 +667,9 @@ enum { * after HBA reset is completed by bnx2i/cnic/bnx2 * modules * @state: tracks offload connection state machine - * @teardown_mode: indicates if conn teardown is abortive or orderly + * @timestamp: tracks the start time when the ep begins to connect + * @num_active_cmds: tracks the number of outstanding commands for this ep + * @ec_shift: the amount of shift as part of the event coal calc * @qp: QP information * @ids: contains chip allocated *context id* & driver assigned * *iscsi cid* @@ -685,6 +688,7 @@ struct bnx2i_endpoint { u32 state; unsigned long timestamp; int num_active_cmds; + u32 ec_shift; struct qp_info qp; struct ep_handles ids; diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index a8a2b6b65a3c..5c54a2d9b834 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -138,7 +138,6 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action) u16 next_index; u32 num_active_cmds; - /* Coalesce CQ entries only on 10G devices */ if (!test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) return; @@ -148,16 +147,19 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action) * interrupts and other unwanted results */ cq_db = (struct bnx2i_5771x_cq_db *) ep->qp.cq_pgtbl_virt; - if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF) - return; - if (action == CNIC_ARM_CQE) { + if (action != CNIC_ARM_CQE_FP) + if (cq_db->sqn[0] && cq_db->sqn[0] != 0xFFFF) + return; + + if (action == CNIC_ARM_CQE || action == CNIC_ARM_CQE_FP) { num_active_cmds = ep->num_active_cmds; if (num_active_cmds <= event_coal_min) next_index = 1; else next_index = event_coal_min + - (num_active_cmds - event_coal_min) / event_coal_div; + ((num_active_cmds - event_coal_min) >> + ep->ec_shift); if (!next_index) next_index = 1; cq_index = ep->qp.cqe_exp_seq_sn + next_index - 1; @@ -1935,7 +1937,6 @@ cqe_out: qp->cq_cons_idx++; } } - bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE); } /** @@ -1949,22 +1950,23 @@ cqe_out: static void bnx2i_fastpath_notification(struct bnx2i_hba *hba, struct iscsi_kcqe *new_cqe_kcqe) { - struct bnx2i_conn *conn; + struct bnx2i_conn *bnx2i_conn; u32 iscsi_cid; iscsi_cid = new_cqe_kcqe->iscsi_conn_id; - conn = bnx2i_get_conn_from_id(hba, iscsi_cid); + bnx2i_conn = bnx2i_get_conn_from_id(hba, iscsi_cid); - if (!conn) { + if (!bnx2i_conn) { printk(KERN_ALERT "cid #%x not valid\n", iscsi_cid); return; } - if (!conn->ep) { + if (!bnx2i_conn->ep) { printk(KERN_ALERT "cid #%x - ep not bound\n", iscsi_cid); return; } - - bnx2i_process_new_cqes(conn); + bnx2i_process_new_cqes(bnx2i_conn); + bnx2i_arm_cq_event_coalescing(bnx2i_conn->ep, CNIC_ARM_CQE_FP); + bnx2i_process_new_cqes(bnx2i_conn); } diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index 51a970f3bc70..041928b23cb0 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -379,6 +379,7 @@ static struct iscsi_endpoint *bnx2i_alloc_ep(struct bnx2i_hba *hba) { struct iscsi_endpoint *ep; struct bnx2i_endpoint *bnx2i_ep; + u32 ec_div; ep = iscsi_create_endpoint(sizeof(*bnx2i_ep)); if (!ep) { @@ -393,6 +394,11 @@ static struct iscsi_endpoint *bnx2i_alloc_ep(struct bnx2i_hba *hba) bnx2i_ep->ep_iscsi_cid = (u16) -1; bnx2i_ep->hba = hba; bnx2i_ep->hba_age = hba->age; + + ec_div = event_coal_div; + while (ec_div >>= 1) + bnx2i_ep->ec_shift += 1; + hba->ofld_conns_active++; init_waitqueue_head(&bnx2i_ep->ofld_wait); return ep; @@ -2159,7 +2165,7 @@ static struct scsi_host_template bnx2i_host_template = { .change_queue_depth = iscsi_change_queue_depth, .can_queue = 1024, .max_sectors = 127, - .cmd_per_lun = 32, + .cmd_per_lun = 24, .this_id = -1, .use_clustering = ENABLE_CLUSTERING, .sg_tablesize = ISCSI_MAX_BDS_PER_CMD, -- cgit v1.2.3 From 0bcaa11154f07502e68375617e5650173eea8e50 Mon Sep 17 00:00:00 2001 From: Luben Tuikov Date: Thu, 19 May 2011 00:00:58 -0700 Subject: [SCSI] Retrieve the Caching mode page (version 2) Some kernel transport drivers unconditionally disable retrieval of the Caching mode page. One such for example is the BBB/CBI transport over USB. Such a restraint is too harsh as some devices do support the Caching mode page. Unconditionally enabling the retrieval of this mode page over those transports at their transport code level may result in some devices failing and becoming unusable. This patch implements a method of retrieving the Caching mode page without unconditionally enabling it in the transports which unconditionally disable it. The idea is to ask for all supported pages, page code 0x3F, and then search for the Caching mode page in the mode parameter data returned. The sd driver already asks for all the mode pages supported by the attached device by setting the page code to 0x3F in order to find out if the media is write protected by reading the WP bit in the Device Specific Parameter field. It then attempts to retrieve only the Caching mode page by setting the page code to 8 and actually attempting to retrieve it if and only if the transport allows it. The method implemented here is that if the transport doesn't allow retrieval of the Caching mode page and the device is not RBC, then we ask for all pages supported by setting the page code to 0x3F (similarly to how the WP bit is retrieved above), and then we search for the Caching mode page in the mode parameter data returned. With this patch, devices over SATA, report this (no change): Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Smart devices report their Caching mode page. This is a change where we'd previously see the kernel making assumption about the device's cache being write-through: Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0 Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB) Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08 Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA And "dumb" devices over BBB, are correctly shown not to support reporting the Caching mode page: Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB) Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00 Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through Version 2 adds this: Some devices don't support page code 0x3F, and others require a fixed transfer length of 192 bytes. This single commit includes a patch by Alan Stern which fixes this. Reported-and-tested-by: Richard Senior Signed-off-by: Alan Stern Signed-off-by: Luben Tuikov Signed-off-by: James Bottomley --- drivers/scsi/sd.c | 79 ++++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 61 insertions(+), 18 deletions(-) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 1c69c14be0cd..953773cb26d9 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2022,16 +2022,26 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) int dbd; int modepage; + int first_len; struct scsi_mode_data data; struct scsi_sense_hdr sshdr; int old_wce = sdkp->WCE; int old_rcd = sdkp->RCD; int old_dpofua = sdkp->DPOFUA; - if (sdp->skip_ms_page_8) - goto defaults; - - if (sdp->type == TYPE_RBC) { + first_len = 4; + if (sdp->skip_ms_page_8) { + if (sdp->type == TYPE_RBC) + goto defaults; + else { + if (sdp->skip_ms_page_3f) + goto defaults; + modepage = 0x3F; + if (sdp->use_192_bytes_for_3f) + first_len = 192; + dbd = 0; + } + } else if (sdp->type == TYPE_RBC) { modepage = 6; dbd = 8; } else { @@ -2040,13 +2050,15 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) } /* cautiously ask */ - res = sd_do_mode_sense(sdp, dbd, modepage, buffer, 4, &data, &sshdr); + res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len, + &data, &sshdr); if (!scsi_status_is_good(res)) goto bad_sense; if (!data.header_length) { modepage = 6; + first_len = 0; sd_printk(KERN_ERR, sdkp, "Missing header in MODE_SENSE response\n"); } @@ -2059,30 +2071,61 @@ sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer) */ if (len < 3) goto bad_sense; - if (len > 20) - len = 20; - - /* Take headers and block descriptors into account */ - len += data.header_length + data.block_descriptor_length; - if (len > SD_BUF_SIZE) - goto bad_sense; + else if (len > SD_BUF_SIZE) { + sd_printk(KERN_NOTICE, sdkp, "Truncating mode parameter " + "data from %d to %d bytes\n", len, SD_BUF_SIZE); + len = SD_BUF_SIZE; + } + if (modepage == 0x3F && sdp->use_192_bytes_for_3f) + len = 192; /* Get the data */ - res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr); + if (len > first_len) + res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, + &data, &sshdr); if (scsi_status_is_good(res)) { int offset = data.header_length + data.block_descriptor_length; - if (offset >= SD_BUF_SIZE - 2) { - sd_printk(KERN_ERR, sdkp, "Malformed MODE SENSE response\n"); - goto defaults; + while (offset < len) { + u8 page_code = buffer[offset] & 0x3F; + u8 spf = buffer[offset] & 0x40; + + if (page_code == 8 || page_code == 6) { + /* We're interested only in the first 3 bytes. + */ + if (len - offset <= 2) { + sd_printk(KERN_ERR, sdkp, "Incomplete " + "mode parameter data\n"); + goto defaults; + } else { + modepage = page_code; + goto Page_found; + } + } else { + /* Go to the next page */ + if (spf && len - offset > 3) + offset += 4 + (buffer[offset+2] << 8) + + buffer[offset+3]; + else if (!spf && len - offset > 1) + offset += 2 + buffer[offset+1]; + else { + sd_printk(KERN_ERR, sdkp, "Incomplete " + "mode parameter data\n"); + goto defaults; + } + } } - if ((buffer[offset] & 0x3f) != modepage) { + if (modepage == 0x3F) { + sd_printk(KERN_ERR, sdkp, "No Caching mode page " + "present\n"); + goto defaults; + } else if ((buffer[offset] & 0x3f) != modepage) { sd_printk(KERN_ERR, sdkp, "Got wrong page\n"); goto defaults; } - + Page_found: if (modepage == 8) { sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0); sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0); -- cgit v1.2.3 From 3eef6257de48ff84a5d98ca533685df8a3beaeb8 Mon Sep 17 00:00:00 2001 From: David Jeffery Date: Thu, 19 May 2011 14:41:12 -0400 Subject: [SCSI] Reduce error recovery time by reducing use of TURs In error recovery, most scsi error recovery stages will send a TUR command for every bad command when a driver's error handler reports success. When several bad commands to the same device, this results in a device being probed multiple times. This becomes very problematic if the device or connection is in a state where the device still doesn't respond to commands even after a recovery function returns success. The error handler must wait for the test commands to time out. The time waiting for the redundant commands can drastically lengthen error recovery. This patch alters the scsi mid-layer's error routines to send test commands once per device instead of once per bad command. This can drastically lower error recovery time. [jejb: fixed up whitespace and formatting] Signed-of-by: David Jeffery Signed-off-by: James Bottomley --- drivers/scsi/scsi_error.c | 87 ++++++++++++++++++++++++++++++++++++----------- 1 file changed, 67 insertions(+), 20 deletions(-) diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index abea2cf05c2e..a4b9cdbaaa0b 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -50,6 +50,8 @@ #define BUS_RESET_SETTLE_TIME (10) #define HOST_RESET_SETTLE_TIME (10) +static int scsi_eh_try_stu(struct scsi_cmnd *scmd); + /* called with shost->host_lock held */ void scsi_eh_wakeup(struct Scsi_Host *shost) { @@ -946,6 +948,48 @@ retry_tur: } } +/** + * scsi_eh_test_devices - check if devices are responding from error recovery. + * @cmd_list: scsi commands in error recovery. + * @work_q: queue for commands which still need more error recovery + * @done_q: queue for commands which are finished + * @try_stu: boolean on if a STU command should be tried in addition to TUR. + * + * Decription: + * Tests if devices are in a working state. Commands to devices now in + * a working state are sent to the done_q while commands to devices which + * are still failing to respond are returned to the work_q for more + * processing. + **/ +static int scsi_eh_test_devices(struct list_head *cmd_list, + struct list_head *work_q, + struct list_head *done_q, int try_stu) +{ + struct scsi_cmnd *scmd, *next; + struct scsi_device *sdev; + int finish_cmds; + + while (!list_empty(cmd_list)) { + scmd = list_entry(cmd_list->next, struct scsi_cmnd, eh_entry); + sdev = scmd->device; + + finish_cmds = !scsi_device_online(scmd->device) || + (try_stu && !scsi_eh_try_stu(scmd) && + !scsi_eh_tur(scmd)) || + !scsi_eh_tur(scmd); + + list_for_each_entry_safe(scmd, next, cmd_list, eh_entry) + if (scmd->device == sdev) { + if (finish_cmds) + scsi_eh_finish_cmd(scmd, done_q); + else + list_move_tail(&scmd->eh_entry, work_q); + } + } + return list_empty(work_q); +} + + /** * scsi_eh_abort_cmds - abort pending commands. * @work_q: &list_head for pending commands. @@ -962,6 +1006,7 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, struct list_head *done_q) { struct scsi_cmnd *scmd, *next; + LIST_HEAD(check_list); int rtn; list_for_each_entry_safe(scmd, next, work_q, eh_entry) { @@ -973,11 +1018,10 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, rtn = scsi_try_to_abort_cmd(scmd->device->host->hostt, scmd); if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { scmd->eh_eflags &= ~SCSI_EH_CANCEL_CMD; - if (!scsi_device_online(scmd->device) || - rtn == FAST_IO_FAIL || - !scsi_eh_tur(scmd)) { + if (rtn == FAST_IO_FAIL) scsi_eh_finish_cmd(scmd, done_q); - } + else + list_move_tail(&scmd->eh_entry, &check_list); } else SCSI_LOG_ERROR_RECOVERY(3, printk("%s: aborting" " cmd failed:" @@ -986,7 +1030,7 @@ static int scsi_eh_abort_cmds(struct list_head *work_q, scmd)); } - return list_empty(work_q); + return scsi_eh_test_devices(&check_list, work_q, done_q, 0); } /** @@ -1137,6 +1181,7 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, struct list_head *done_q) { LIST_HEAD(tmp_list); + LIST_HEAD(check_list); list_splice_init(work_q, &tmp_list); @@ -1161,9 +1206,9 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, if (scmd_id(scmd) != id) continue; - if ((rtn == SUCCESS || rtn == FAST_IO_FAIL) - && (!scsi_device_online(scmd->device) || - rtn == FAST_IO_FAIL || !scsi_eh_tur(scmd))) + if (rtn == SUCCESS) + list_move_tail(&scmd->eh_entry, &check_list); + else if (rtn == FAST_IO_FAIL) scsi_eh_finish_cmd(scmd, done_q); else /* push back on work queue for further processing */ @@ -1171,7 +1216,7 @@ static int scsi_eh_target_reset(struct Scsi_Host *shost, } } - return list_empty(work_q); + return scsi_eh_test_devices(&check_list, work_q, done_q, 0); } /** @@ -1185,6 +1230,7 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, struct list_head *done_q) { struct scsi_cmnd *scmd, *chan_scmd, *next; + LIST_HEAD(check_list); unsigned int channel; int rtn; @@ -1216,12 +1262,14 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, rtn = scsi_try_bus_reset(chan_scmd); if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { list_for_each_entry_safe(scmd, next, work_q, eh_entry) { - if (channel == scmd_channel(scmd)) - if (!scsi_device_online(scmd->device) || - rtn == FAST_IO_FAIL || - !scsi_eh_tur(scmd)) + if (channel == scmd_channel(scmd)) { + if (rtn == FAST_IO_FAIL) scsi_eh_finish_cmd(scmd, done_q); + else + list_move_tail(&scmd->eh_entry, + &check_list); + } } } else { SCSI_LOG_ERROR_RECOVERY(3, printk("%s: BRST" @@ -1230,7 +1278,7 @@ static int scsi_eh_bus_reset(struct Scsi_Host *shost, channel)); } } - return list_empty(work_q); + return scsi_eh_test_devices(&check_list, work_q, done_q, 0); } /** @@ -1242,6 +1290,7 @@ static int scsi_eh_host_reset(struct list_head *work_q, struct list_head *done_q) { struct scsi_cmnd *scmd, *next; + LIST_HEAD(check_list); int rtn; if (!list_empty(work_q)) { @@ -1252,12 +1301,10 @@ static int scsi_eh_host_reset(struct list_head *work_q, , current->comm)); rtn = scsi_try_host_reset(scmd); - if (rtn == SUCCESS || rtn == FAST_IO_FAIL) { + if (rtn == SUCCESS) { + list_splice_init(work_q, &check_list); + } else if (rtn == FAST_IO_FAIL) { list_for_each_entry_safe(scmd, next, work_q, eh_entry) { - if (!scsi_device_online(scmd->device) || - rtn == FAST_IO_FAIL || - (!scsi_eh_try_stu(scmd) && !scsi_eh_tur(scmd)) || - !scsi_eh_tur(scmd)) scsi_eh_finish_cmd(scmd, done_q); } } else { @@ -1266,7 +1313,7 @@ static int scsi_eh_host_reset(struct list_head *work_q, current->comm)); } } - return list_empty(work_q); + return scsi_eh_test_devices(&check_list, work_q, done_q, 1); } /** -- cgit v1.2.3 From 97868c8905a1537153d406c4a3aa39a503a5c299 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:09 -0700 Subject: [SCSI] target: Fix multi task->task_sg[] chaining logic bug This patch fixes a bug in transport_do_task_sg_chain() used by HW target mode modules with sg_chain() to provide a single sg_next() walkable memory layout for use with pci_map_sg() and friends. This patch addresses an issue with mapping multiple small block max_sector tasks across multiple struct se_task->task_sg[] mappings for HW target mode operation. This was causing OOPs with (cmd->t_task->t_tasks_no > 1) I/O traffic for HW target drivers using transport_do_task_sg_chain(), and has been tested so far with tcm_fc(openfcoe), tcm_qla2xxx, and ib_srpt fabrics with t_tasks_no > 1 IBLOCK backends using a smaller max_sectors to trigger the original issue. Signed-off-by: Nicholas Bellinger Acked-by: Kiran Patil Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/target/target_core_transport.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index b9d3501bdd91..833060e0de5e 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4776,18 +4776,20 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) sg_end_cur->page_link &= ~0x02; sg_chain(sg_head, task_sg_num, sg_head_cur); - sg_count += (task->task_sg_num + 1); - } else sg_count += task->task_sg_num; + task_sg_num = (task->task_sg_num + 1); + } else { + sg_chain(sg_head, task_sg_num, sg_head_cur); + sg_count += task->task_sg_num; + task_sg_num = task->task_sg_num; + } sg_head = sg_head_cur; sg_link = sg_link_cur; - task_sg_num = task->task_sg_num; continue; } sg_head = sg_first = &task->task_sg[0]; sg_link = &task->task_sg[task->task_sg_num]; - task_sg_num = task->task_sg_num; /* * Check for single task.. */ @@ -4798,9 +4800,12 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) */ sg_end = &task->task_sg[task->task_sg_num - 1]; sg_end->page_link &= ~0x02; - sg_count += (task->task_sg_num + 1); - } else sg_count += task->task_sg_num; + task_sg_num = (task->task_sg_num + 1); + } else { + sg_count += task->task_sg_num; + task_sg_num = task->task_sg_num; + } } /* * Setup the starting pointer and total t_tasks_sg_linked_no including @@ -4809,21 +4814,20 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) T_TASK(cmd)->t_tasks_sg_chained = sg_first; T_TASK(cmd)->t_tasks_sg_chained_no = sg_count; - DEBUG_CMD_M("Setup T_TASK(cmd)->t_tasks_sg_chained: %p and" - " t_tasks_sg_chained_no: %u\n", T_TASK(cmd)->t_tasks_sg_chained, + DEBUG_CMD_M("Setup cmd: %p T_TASK(cmd)->t_tasks_sg_chained: %p and" + " t_tasks_sg_chained_no: %u\n", cmd, T_TASK(cmd)->t_tasks_sg_chained, T_TASK(cmd)->t_tasks_sg_chained_no); for_each_sg(T_TASK(cmd)->t_tasks_sg_chained, sg, T_TASK(cmd)->t_tasks_sg_chained_no, i) { - DEBUG_CMD_M("SG: %p page: %p length: %d offset: %d\n", - sg, sg_page(sg), sg->length, sg->offset); + DEBUG_CMD_M("SG[%d]: %p page: %p length: %d offset: %d, magic: 0x%08x\n", + i, sg, sg_page(sg), sg->length, sg->offset, sg->sg_magic); if (sg_is_chain(sg)) DEBUG_CMD_M("SG: %p sg_is_chain=1\n", sg); if (sg_is_last(sg)) DEBUG_CMD_M("SG: %p sg_is_last=1\n", sg); } - } EXPORT_SYMBOL(transport_do_task_sg_chain); -- cgit v1.2.3 From 53ab6709b4d35b1924240854d794482fd7d33d4a Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:10 -0700 Subject: [SCSI] target: Fix interrupt context bug with stats_lock and core_tmr_alloc_req This patch fixes two bugs wrt to the interrupt context usage of target core with HW target mode drivers. It first converts the usage of struct se_device->stats_lock in transport_get_lun_for_cmd() and core_tmr_lun_reset() to properly use spin_lock_irq() to address an BUG with CONFIG_LOCKDEP_SUPPORT=y enabled. This patch also adds a 'in_interrupt()' check to allow GFP_ATOMIC usage from core_tmr_alloc_req() to fix a 'sleeping in interrupt context' BUG with HW target fabrics that require this logic to function. Signed-off-by: Nicholas Bellinger Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/target/target_core_device.c | 4 ++-- drivers/target/target_core_tmr.c | 7 ++++--- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index d25e20829012..fc10ed4ac493 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -150,13 +150,13 @@ out: { struct se_device *dev = se_lun->lun_se_dev; - spin_lock(&dev->stats_lock); + spin_lock_irq(&dev->stats_lock); dev->num_cmds++; if (se_cmd->data_direction == DMA_TO_DEVICE) dev->write_bytes += se_cmd->data_length; else if (se_cmd->data_direction == DMA_FROM_DEVICE) dev->read_bytes += se_cmd->data_length; - spin_unlock(&dev->stats_lock); + spin_unlock_irq(&dev->stats_lock); } /* diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 4a109835e420..59b8b9c5ad72 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -55,7 +55,8 @@ struct se_tmr_req *core_tmr_alloc_req( { struct se_tmr_req *tmr; - tmr = kmem_cache_zalloc(se_tmr_req_cache, GFP_KERNEL); + tmr = kmem_cache_zalloc(se_tmr_req_cache, (in_interrupt()) ? + GFP_ATOMIC : GFP_KERNEL); if (!(tmr)) { printk(KERN_ERR "Unable to allocate struct se_tmr_req\n"); return ERR_PTR(-ENOMEM); @@ -398,9 +399,9 @@ int core_tmr_lun_reset( printk(KERN_INFO "LUN_RESET: SCSI-2 Released reservation\n"); } - spin_lock(&dev->stats_lock); + spin_lock_irq(&dev->stats_lock); dev->num_resets++; - spin_unlock(&dev->stats_lock); + spin_unlock_irq(&dev->stats_lock); DEBUG_LR("LUN_RESET: %s for [%s] Complete\n", (preempt_and_abort_list) ? "Preempt" : "TMR", -- cgit v1.2.3 From f436677262a5b524ac87675014c6d4e8ee153029 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:11 -0700 Subject: [SCSI] target: Fix bug with task_sg chained transport_free_dev_tasks release This patch addresses a bug in the target core release path for HW operation where transport_free_dev_tasks() was incorrectly being called from transport_lun_remove_cmd() while releasing a se_cmd reference and calling struct target_core_fabric_ops->queue_data_in(). This would result in a OOPs with HW target mode when the release of se_task->task_sg[] would happen before pci_unmap_sg() can be called in HW target mode fabric module code. This patch addresses the issue by moving transport_free_dev_tasks() from transport_lun_remove_cmd() into transport_generic_free_cmd(), and adding TRANSPORT_FREE_CMD_INTR and transport_generic_free_cmd_intr() to allow se_cmd descriptor release to happen fromfrom within transport_processing_thread() process context when release of se_cmd is not possible from HW interrupt context. Signed-off-by: Nicholas Bellinger Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/target/target_core_transport.c | 13 ++++++++++++- include/target/target_core_base.h | 1 + include/target/target_core_transport.h | 1 + 3 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 833060e0de5e..7c87b042375a 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -762,7 +762,6 @@ static void transport_lun_remove_cmd(struct se_cmd *cmd) transport_all_task_dev_remove_state(cmd); spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); - transport_free_dev_tasks(cmd); check_lun: spin_lock_irqsave(&lun->lun_cmd_lock, flags); @@ -2058,6 +2057,13 @@ int transport_generic_handle_tmr( } EXPORT_SYMBOL(transport_generic_handle_tmr); +void transport_generic_free_cmd_intr( + struct se_cmd *cmd) +{ + transport_add_cmd_to_queue(cmd, TRANSPORT_FREE_CMD_INTR); +} +EXPORT_SYMBOL(transport_generic_free_cmd_intr); + static int transport_stop_tasks_for_cmd(struct se_cmd *cmd) { struct se_task *task, *task_tmp; @@ -5301,6 +5307,8 @@ void transport_generic_free_cmd( if (wait_for_tasks && cmd->transport_wait_for_tasks) cmd->transport_wait_for_tasks(cmd, 0, 0); + transport_free_dev_tasks(cmd); + transport_generic_remove(cmd, release_to_pool, session_reinstatement); } @@ -6136,6 +6144,9 @@ get_cmd: case TRANSPORT_REMOVE: transport_generic_remove(cmd, 1, 0); break; + case TRANSPORT_FREE_CMD_INTR: + transport_generic_free_cmd(cmd, 0, 1, 0); + break; case TRANSPORT_PROCESS_TMR: transport_generic_do_tmr(cmd); break; diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 1d3b5b2f0dbc..561ac99def5a 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -98,6 +98,7 @@ enum transport_state_table { TRANSPORT_REMOVE = 14, TRANSPORT_FREE = 15, TRANSPORT_NEW_CMD_MAP = 16, + TRANSPORT_FREE_CMD_INTR = 17, }; /* Used for struct se_cmd->se_cmd_flags */ diff --git a/include/target/target_core_transport.h b/include/target/target_core_transport.h index 59aa464f6ee2..24a1c6cb83c3 100644 --- a/include/target/target_core_transport.h +++ b/include/target/target_core_transport.h @@ -172,6 +172,7 @@ extern int transport_generic_handle_cdb_map(struct se_cmd *); extern int transport_generic_handle_data(struct se_cmd *); extern void transport_new_cmd_failure(struct se_cmd *); extern int transport_generic_handle_tmr(struct se_cmd *); +extern void transport_generic_free_cmd_intr(struct se_cmd *); extern void __transport_stop_task_timer(struct se_task *, unsigned long *); extern unsigned char transport_asciihex_to_binaryhex(unsigned char val[2]); extern int transport_generic_map_mem_to_cmd(struct se_cmd *cmd, struct scatterlist *, u32, -- cgit v1.2.3 From af57c3ac9947990da2608561b71f4799eb7795c6 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:12 -0700 Subject: [SCSI] target: Fix task->task_execute_queue=1 clear bug + LUN_RESET OOPs This patch fixes a bug where task->task_execute_queue=1 was not being cleared once se_task had been removed from se_device->execute_task_list, resulting in an OOPs in core_tmr_lun_reset() for the task->task_active=0 case where transport_remove_task_from_execute_queue() was incorrectly being called. This patch fixes two cases in transport_get_task_from_execute_queue() and transport_remove_task_from_execute_queue() to properly clear task->task_execute_queue=0 once list_del(&task->t_execute_list) has been called. It also adds an explict check in transport_remove_task_from_execute_queue() to dump_stack + return if called with task->task_execute_queue=0. Signed-off-by: Nicholas Bellinger Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/target/target_core_transport.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 7c87b042375a..623963b8c1b7 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1194,6 +1194,7 @@ transport_get_task_from_execute_queue(struct se_device *dev) break; list_del(&task->t_execute_list); + atomic_set(&task->task_execute_queue, 0); atomic_dec(&dev->execute_tasks); return task; @@ -1209,8 +1210,14 @@ void transport_remove_task_from_execute_queue( { unsigned long flags; + if (atomic_read(&task->task_execute_queue) == 0) { + dump_stack(); + return; + } + spin_lock_irqsave(&dev->execute_task_lock, flags); list_del(&task->t_execute_list); + atomic_set(&task->task_execute_queue, 0); atomic_dec(&dev->execute_tasks); spin_unlock_irqrestore(&dev->execute_task_lock, flags); } -- cgit v1.2.3 From d60b7a0fc918245c6fb8cc2b15e570e040d8f38b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:13 -0700 Subject: [SCSI] target: Convert REPORT_LUNs to use int_to_scsilun This patch converts transport_core_report_lun_response() to use drivers/scsi/scsi_scan.c:int_to_scsilun instead of using the struct target_core_fabric_ops->pack_lun() fabric provided API vector. It also removes the tfo->pack_lun check from target_fabric_tf_ops_check() and removes from struct target_core_fabric_ops->pack_lun() from target_core_fabric_ops.h, and the following mainline scsi-misc fabric modules: *) tcm_loop: Drop tcm_loop_pack_lun() usage *) tcm_fc: Drop ft_pack_lun() usage Reported-by: Mike Christie Signed-off-by: Nicholas A. Bellinger Signed-off-by: James Bottomley --- drivers/target/loopback/tcm_loop.c | 13 ------------- drivers/target/target_core_configfs.c | 4 ---- drivers/target/target_core_device.c | 25 +++++-------------------- drivers/target/tcm_fc/tfc_conf.c | 8 -------- include/target/target_core_fabric_ops.h | 1 - 5 files changed, 5 insertions(+), 46 deletions(-) diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index aed4e464d31c..09681bafe10d 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -939,18 +939,6 @@ static u16 tcm_loop_get_fabric_sense_len(void) return 0; } -static u64 tcm_loop_pack_lun(unsigned int lun) -{ - u64 result; - - /* LSB of lun into byte 1 big-endian */ - result = ((lun & 0xff) << 8); - /* use flat space addressing method */ - result |= 0x40 | ((lun >> 8) & 0x3f); - - return cpu_to_le64(result); -} - static char *tcm_loop_dump_proto_id(struct tcm_loop_hba *tl_hba) { switch (tl_hba->tl_proto_id) { @@ -1481,7 +1469,6 @@ static int tcm_loop_register_configfs(void) fabric->tf_ops.set_fabric_sense_len = &tcm_loop_set_fabric_sense_len; fabric->tf_ops.get_fabric_sense_len = &tcm_loop_get_fabric_sense_len; fabric->tf_ops.is_state_remove = &tcm_loop_is_state_remove; - fabric->tf_ops.pack_lun = &tcm_loop_pack_lun; tf_cg = &fabric->tf_group; /* diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index a5f44a6e6e1d..ee6fad979b50 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -497,10 +497,6 @@ static int target_fabric_tf_ops_check( printk(KERN_ERR "Missing tfo->is_state_remove()\n"); return -EINVAL; } - if (!(tfo->pack_lun)) { - printk(KERN_ERR "Missing tfo->pack_lun()\n"); - return -EINVAL; - } /* * We at least require tfo->fabric_make_wwn(), tfo->fabric_drop_wwn() * tfo->fabric_make_tpg() and tfo->fabric_drop_tpg() in diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index fc10ed4ac493..8407f9ca2b31 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include @@ -658,8 +659,7 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) struct se_session *se_sess = SE_SESS(se_cmd); struct se_task *se_task; unsigned char *buf = (unsigned char *)T_TASK(se_cmd)->t_task_buf; - u32 cdb_offset = 0, lun_count = 0, offset = 8; - u64 i, lun; + u32 cdb_offset = 0, lun_count = 0, offset = 8, i; list_for_each_entry(se_task, &T_TASK(se_cmd)->t_task_list, t_list) break; @@ -675,15 +675,7 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) * a $FABRIC_MOD. In that case, report LUN=0 only. */ if (!(se_sess)) { - lun = 0; - buf[offset++] = ((lun >> 56) & 0xff); - buf[offset++] = ((lun >> 48) & 0xff); - buf[offset++] = ((lun >> 40) & 0xff); - buf[offset++] = ((lun >> 32) & 0xff); - buf[offset++] = ((lun >> 24) & 0xff); - buf[offset++] = ((lun >> 16) & 0xff); - buf[offset++] = ((lun >> 8) & 0xff); - buf[offset++] = (lun & 0xff); + int_to_scsilun(0, (struct scsi_lun *)&buf[offset]); lun_count = 1; goto done; } @@ -703,15 +695,8 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) if ((cdb_offset + 8) >= se_cmd->data_length) continue; - lun = cpu_to_be64(CMD_TFO(se_cmd)->pack_lun(deve->mapped_lun)); - buf[offset++] = ((lun >> 56) & 0xff); - buf[offset++] = ((lun >> 48) & 0xff); - buf[offset++] = ((lun >> 40) & 0xff); - buf[offset++] = ((lun >> 32) & 0xff); - buf[offset++] = ((lun >> 24) & 0xff); - buf[offset++] = ((lun >> 16) & 0xff); - buf[offset++] = ((lun >> 8) & 0xff); - buf[offset++] = (lun & 0xff); + int_to_scsilun(deve->mapped_lun, (struct scsi_lun *)&buf[offset]); + offset += 8; cdb_offset += 8; } spin_unlock_irq(&SE_NODE_ACL(se_sess)->device_list_lock); diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index fcdbbffe88cc..84e868c255dd 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -519,13 +519,6 @@ static u32 ft_tpg_get_inst_index(struct se_portal_group *se_tpg) return tpg->index; } -static u64 ft_pack_lun(unsigned int index) -{ - WARN_ON(index >= 256); - /* Caller wants this byte-swapped */ - return cpu_to_le64((index & 0xff) << 8); -} - static struct target_core_fabric_ops ft_fabric_ops = { .get_fabric_name = ft_get_fabric_name, .get_fabric_proto_ident = fc_get_fabric_proto_ident, @@ -564,7 +557,6 @@ static struct target_core_fabric_ops ft_fabric_ops = { .get_fabric_sense_len = ft_get_fabric_sense_len, .set_fabric_sense_len = ft_set_fabric_sense_len, .is_state_remove = ft_is_state_remove, - .pack_lun = ft_pack_lun, /* * Setup function pointers for generic logic in * target_core_fabric_configfs.c diff --git a/include/target/target_core_fabric_ops.h b/include/target/target_core_fabric_ops.h index dc78f77f9450..747e1404dca0 100644 --- a/include/target/target_core_fabric_ops.h +++ b/include/target/target_core_fabric_ops.h @@ -77,7 +77,6 @@ struct target_core_fabric_ops { u16 (*set_fabric_sense_len)(struct se_cmd *, u32); u16 (*get_fabric_sense_len)(void); int (*is_state_remove)(struct se_cmd *); - u64 (*pack_lun)(unsigned int); /* * fabric module calls for target_core_fabric_configfs.c */ -- cgit v1.2.3 From e66ecd505addaaf40e7d352796ba8d344f6359dd Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:14 -0700 Subject: [SCSI] target: Convert TASK_ATTR to scsi_tcq.h definitions This patch converts target core and follwing scsi-misc upstream fabric modules to use include/scsi/scsi_tcq.h includes for SIMPLE, HEAD_OF_QUEUE and ORDERED SCSI tasks instead of scsi/libsas.h with TASK_ATTR* *) tcm_loop: Convert tcm_loop_allocate_core_cmd() + tcm_loop_device_reset() to scsi_tcq.h *) tcm_fc: Convert ft_send_cmd() from FCP_PTA_* to scsi_tcq.h Reported-by: Christoph Hellwig Signed-off-by: Nicholas A. Bellinger Signed-off-by: James Bottomley --- drivers/target/loopback/tcm_loop.c | 12 ++++++------ drivers/target/target_core_pscsi.c | 4 ++-- drivers/target/target_core_transport.c | 22 +++++++++++----------- drivers/target/tcm_fc/tfc_cmd.c | 20 +++++++++++++++++++- include/scsi/scsi_tcq.h | 1 + 5 files changed, 39 insertions(+), 20 deletions(-) diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index 09681bafe10d..dee2a2c909f5 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -31,7 +31,7 @@ #include #include #include -#include /* For TASK_ATTR_* */ +#include #include #include @@ -95,17 +95,17 @@ static struct se_cmd *tcm_loop_allocate_core_cmd( if (sc->device->tagged_supported) { switch (sc->tag) { case HEAD_OF_QUEUE_TAG: - sam_task_attr = TASK_ATTR_HOQ; + sam_task_attr = MSG_HEAD_TAG; break; case ORDERED_QUEUE_TAG: - sam_task_attr = TASK_ATTR_ORDERED; + sam_task_attr = MSG_ORDERED_TAG; break; default: - sam_task_attr = TASK_ATTR_SIMPLE; + sam_task_attr = MSG_SIMPLE_TAG; break; } } else - sam_task_attr = TASK_ATTR_SIMPLE; + sam_task_attr = MSG_SIMPLE_TAG; /* * Initialize struct se_cmd descriptor from target_core_mod infrastructure @@ -379,7 +379,7 @@ static int tcm_loop_device_reset(struct scsi_cmnd *sc) * Initialize struct se_cmd descriptor from target_core_mod infrastructure */ transport_init_se_cmd(se_cmd, se_tpg->se_tpg_tfo, se_sess, 0, - DMA_NONE, TASK_ATTR_SIMPLE, + DMA_NONE, MSG_SIMPLE_TAG, &tl_cmd->tl_sense_buf[0]); /* * Allocate the LUN_RESET TMR diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 7ff6a35f26ac..331d423fd0e0 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -41,7 +41,7 @@ #include #include #include -#include /* For TASK_ATTR_* */ +#include #include #include @@ -911,7 +911,7 @@ static int pscsi_do_task(struct se_task *task) * descriptor */ blk_execute_rq_nowait(pdv->pdv_sd->request_queue, NULL, pt->pscsi_req, - (task->task_se_cmd->sam_task_attr == TASK_ATTR_HOQ), + (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG), pscsi_req_done); return PYX_TRANSPORT_SENT_TO_TRANSPORT; diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 623963b8c1b7..4dafeb8b5638 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -42,7 +42,7 @@ #include #include #include -#include /* For TASK_ATTR_* */ +#include #include #include @@ -1074,7 +1074,7 @@ static inline int transport_add_task_check_sam_attr( * head of the struct se_device->execute_task_list, and task_prev * after that for each subsequent task */ - if (task->task_se_cmd->sam_task_attr == TASK_ATTR_HOQ) { + if (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG) { list_add(&task->t_execute_list, (task_prev != NULL) ? &task_prev->t_execute_list : @@ -1873,7 +1873,7 @@ static int transport_check_alloc_task_attr(struct se_cmd *cmd) if (SE_DEV(cmd)->dev_task_attr_type != SAM_TASK_ATTR_EMULATED) return 0; - if (cmd->sam_task_attr == TASK_ATTR_ACA) { + if (cmd->sam_task_attr == MSG_ACA_TAG) { DEBUG_STA("SAM Task Attribute ACA" " emulation is not supported\n"); return -1; @@ -2517,7 +2517,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) * Check for the existence of HEAD_OF_QUEUE, and if true return 1 * to allow the passed struct se_cmd list of tasks to the front of the list. */ - if (cmd->sam_task_attr == TASK_ATTR_HOQ) { + if (cmd->sam_task_attr == MSG_HEAD_TAG) { atomic_inc(&SE_DEV(cmd)->dev_hoq_count); smp_mb__after_atomic_inc(); DEBUG_STA("Added HEAD_OF_QUEUE for CDB:" @@ -2525,7 +2525,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) T_TASK(cmd)->t_task_cdb[0], cmd->se_ordered_id); return 1; - } else if (cmd->sam_task_attr == TASK_ATTR_ORDERED) { + } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { spin_lock(&SE_DEV(cmd)->ordered_cmd_lock); list_add_tail(&cmd->se_ordered_list, &SE_DEV(cmd)->ordered_cmd_list); @@ -3424,7 +3424,7 @@ static int transport_generic_cmd_sequencer( * See spc4r17 section 5.3 */ if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) - cmd->sam_task_attr = TASK_ATTR_HOQ; + cmd->sam_task_attr = MSG_HEAD_TAG; cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; break; case READ_BUFFER: @@ -3632,7 +3632,7 @@ static int transport_generic_cmd_sequencer( * See spc4r17 section 5.3 */ if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) - cmd->sam_task_attr = TASK_ATTR_HOQ; + cmd->sam_task_attr = MSG_HEAD_TAG; cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; break; default: @@ -3790,21 +3790,21 @@ static void transport_complete_task_attr(struct se_cmd *cmd) struct se_cmd *cmd_p, *cmd_tmp; int new_active_tasks = 0; - if (cmd->sam_task_attr == TASK_ATTR_SIMPLE) { + if (cmd->sam_task_attr == MSG_SIMPLE_TAG) { atomic_dec(&dev->simple_cmds); smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; DEBUG_STA("Incremented dev->dev_cur_ordered_id: %u for" " SIMPLE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); - } else if (cmd->sam_task_attr == TASK_ATTR_HOQ) { + } else if (cmd->sam_task_attr == MSG_HEAD_TAG) { atomic_dec(&dev->dev_hoq_count); smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; DEBUG_STA("Incremented dev_cur_ordered_id: %u for" " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); - } else if (cmd->sam_task_attr == TASK_ATTR_ORDERED) { + } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { spin_lock(&dev->ordered_cmd_lock); list_del(&cmd->se_ordered_list); atomic_dec(&dev->dev_ordered_sync); @@ -3837,7 +3837,7 @@ static void transport_complete_task_attr(struct se_cmd *cmd) new_active_tasks++; spin_lock(&dev->delayed_cmd_lock); - if (cmd_p->sam_task_attr == TASK_ATTR_ORDERED) + if (cmd_p->sam_task_attr == MSG_ORDERED_TAG) break; } spin_unlock(&dev->delayed_cmd_lock); diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 49e51778f733..c056a1132ae1 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -592,8 +593,25 @@ static void ft_send_cmd(struct ft_cmd *cmd) case FCP_CFL_WRDATA | FCP_CFL_RDDATA: goto err; /* TBD not supported by tcm_fc yet */ } + /* + * Locate the SAM Task Attr from fc_pri_ta + */ + switch (fcp->fc_pri_ta & FCP_PTA_MASK) { + case FCP_PTA_HEADQ: + task_attr = MSG_HEAD_TAG; + break; + case FCP_PTA_ORDERED: + task_attr = MSG_ORDERED_TAG; + break; + case FCP_PTA_ACA: + task_attr = MSG_ACA_TAG; + break; + case FCP_PTA_SIMPLE: /* Fallthrough */ + default: + task_attr = MSG_SIMPLE_TAG; + } + - /* FCP_PTA_ maps 1:1 to TASK_ATTR_ */ task_attr = fcp->fc_pri_ta & FCP_PTA_MASK; data_len = ntohl(fcp->fc_dl); cmd->cdb = fcp->fc_cdb; diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h index d6e7994aa634..81dd12edc38c 100644 --- a/include/scsi/scsi_tcq.h +++ b/include/scsi/scsi_tcq.h @@ -9,6 +9,7 @@ #define MSG_SIMPLE_TAG 0x20 #define MSG_HEAD_TAG 0x21 #define MSG_ORDERED_TAG 0x22 +#define MSG_ACA_TAG 0x24 /* unsupported */ #define SCSI_NO_TAG (-1) /* identify no tag in use */ -- cgit v1.2.3 From 86cfa7fcb7f2a14a62341ff03263826c85ec17e9 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 23 May 2011 14:10:32 -0700 Subject: [SCSI] MAINTAINERS: Add drivers/target/ entry Signed-off-by: Nicholas A. Bellinger Signed-off-by: James Bottomley --- MAINTAINERS | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 0b415248ae25..1868aafae968 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6062,6 +6062,17 @@ F: Documentation/filesystems/sysv-fs.txt F: fs/sysv/ F: include/linux/sysv_fs.h +TARGET SUBSYSTEM +M: Nicholas A. Bellinger +L: linux-scsi@vger.kernel.org +L: http://groups.google.com/group/linux-iscsi-target-dev +W: http://www.linux-iscsi.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/nab/lio-core-2.6.git master +S: Supported +F: drivers/target/ +F: include/target/ +F: Documentation/target/ + TASKSTATS STATISTICS INTERFACE M: Balbir Singh S: Maintained -- cgit v1.2.3 From 8e910965975a125fff806acae80ab2b640a8dac7 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Mon, 23 May 2011 15:29:12 -0700 Subject: [SCSI] aic94xx: world-writable sysfs update_bios file Don't allow everybody to load firmware. Signed-off-by: Vasiliy Kulikov Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/aic94xx/aic94xx_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c index 3b7e83d2dab4..d5ff142c93a2 100644 --- a/drivers/scsi/aic94xx/aic94xx_init.c +++ b/drivers/scsi/aic94xx/aic94xx_init.c @@ -486,7 +486,7 @@ static ssize_t asd_show_update_bios(struct device *dev, flash_error_table[i].reason); } -static DEVICE_ATTR(update_bios, S_IRUGO|S_IWUGO, +static DEVICE_ATTR(update_bios, S_IRUGO|S_IWUSR, asd_show_update_bios, asd_store_update_bios); static int asd_create_dev_attrs(struct asd_ha_struct *asd_ha) -- cgit v1.2.3 From a061f57d662ac2b19a1ff1955349adce7a282a5d Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 23 May 2011 15:29:12 -0700 Subject: [SCSI] osst: wrong index used in inner loop Index i was already used in the outer loop. Fixes a potentially-infinite loop. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Roel Kluin Cc: Willem Riede Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/osst.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 58f5be4740e9..9b79e84f95bb 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -4702,8 +4702,9 @@ static int __os_scsi_tape_open(struct inode * inode, struct file * filp) STp->partition = STp->new_partition = 0; if (STp->can_partitions) STp->nbr_partitions = 1; /* This guess will be updated later if necessary */ - for (i=0; i < ST_NBR_PARTITIONS; i++) { - STps = &(STp->ps[i]); + int j; + for (j = 0; j < ST_NBR_PARTITIONS; j++) { + STps = &(STp->ps[j]); STps->rw = ST_IDLE; STps->eof = ST_NOEOF; STps->at_sm = 0; -- cgit v1.2.3 From 6e2037b0fd4d4ad9be941a3520d21945bc031a20 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 23 May 2011 15:29:13 -0700 Subject: [SCSI] osst: fix warning drivers/scsi/osst.c: In function '__os_scsi_tape_open': drivers/scsi/osst.c:4705: warning: ISO C90 forbids mixed declarations and code Signed-off-by: Andrew Morton Signed-off-by: James Bottomley --- drivers/scsi/osst.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c index 9b79e84f95bb..de0b1a704fb5 100644 --- a/drivers/scsi/osst.c +++ b/drivers/scsi/osst.c @@ -4698,11 +4698,12 @@ static int __os_scsi_tape_open(struct inode * inode, struct file * filp) break; if ((SRpnt->sense[2] & 0x0f) == UNIT_ATTENTION) { + int j; + STp->pos_unknown = 0; STp->partition = STp->new_partition = 0; if (STp->can_partitions) STp->nbr_partitions = 1; /* This guess will be updated later if necessary */ - int j; for (j = 0; j < ST_NBR_PARTITIONS; j++) { STps = &(STp->ps[j]); STps->rw = ST_IDLE; -- cgit v1.2.3 From fad4dab5e44e10acf6b0235e469cb8e773b58e31 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Wed, 18 May 2011 17:06:05 +0200 Subject: [SCSI] Fix Ultrastor asm snippet Commit 1292500b replaced "=m" (*field) : "1" (*field) with "=m" (*field) : with comment "The following patch fixes it by using the '+' operator on the (*field) operand, marking it as read-write to gcc." '+' was actually forgotten. This really puts it. Signed-off-by: Samuel Thibault Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/ultrastor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/ultrastor.c b/drivers/scsi/ultrastor.c index 9f4b58b7daad..7e22b737dfd8 100644 --- a/drivers/scsi/ultrastor.c +++ b/drivers/scsi/ultrastor.c @@ -307,7 +307,7 @@ static inline int find_and_clear_bit_16(unsigned long *field) "0: bsfw %1,%w0\n\t" "btr %0,%1\n\t" "jnc 0b" - : "=&r" (rv), "=m" (*field) :); + : "=&r" (rv), "+m" (*field) :); return rv; } -- cgit v1.2.3 From 92505299a131b47992d318f2875d5629ac870d87 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Tue, 24 May 2011 17:38:52 +0100 Subject: ASoC: core - remove superfluous new line. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 07991d438796..d75043ed7fc0 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1617,7 +1617,6 @@ static int soc_probe_dai_link(struct snd_soc_card *card, int num) rtd->pmdown_time = pmdown_time; /* probe the cpu_dai */ - if (!cpu_dai->probed) { if (!try_module_get(cpu_dai->dev->driver->owner)) return -ENODEV; -- cgit v1.2.3 From 354258011e8e86961f7a72ad154ca8caf0c4c6f7 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 24 May 2011 23:35:55 +0200 Subject: PM / Hibernate: Remove arch_prepare_suspend() All architectures supporting hibernation define arch_prepare_suspend() as an empty function, so remove it. Signed-off-by: Rafael J. Wysocki --- arch/frv/include/asm/suspend.h | 20 -------------------- arch/mips/include/asm/suspend.h | 2 -- arch/powerpc/include/asm/suspend.h | 6 ------ arch/powerpc/kernel/swsusp.c | 1 - arch/s390/include/asm/suspend.h | 10 ---------- arch/sh/include/asm/suspend.h | 1 - arch/unicore32/include/asm/suspend.h | 1 - arch/x86/include/asm/suspend_32.h | 2 -- arch/x86/include/asm/suspend_64.h | 5 ----- kernel/power/hibernate.c | 5 ----- 10 files changed, 53 deletions(-) delete mode 100644 arch/frv/include/asm/suspend.h delete mode 100644 arch/powerpc/include/asm/suspend.h delete mode 100644 arch/s390/include/asm/suspend.h diff --git a/arch/frv/include/asm/suspend.h b/arch/frv/include/asm/suspend.h deleted file mode 100644 index 5fa7b5a6ee40..000000000000 --- a/arch/frv/include/asm/suspend.h +++ /dev/null @@ -1,20 +0,0 @@ -/* suspend.h: suspension stuff - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SUSPEND_H -#define _ASM_SUSPEND_H - -static inline int arch_prepare_suspend(void) -{ - return 0; -} - -#endif /* _ASM_SUSPEND_H */ diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h index 294cdb66c5fc..3adac3b53d19 100644 --- a/arch/mips/include/asm/suspend.h +++ b/arch/mips/include/asm/suspend.h @@ -1,8 +1,6 @@ #ifndef __ASM_SUSPEND_H #define __ASM_SUSPEND_H -static inline int arch_prepare_suspend(void) { return 0; } - /* References to section boundaries */ extern const void __nosave_begin, __nosave_end; diff --git a/arch/powerpc/include/asm/suspend.h b/arch/powerpc/include/asm/suspend.h deleted file mode 100644 index c6efc3466aa6..000000000000 --- a/arch/powerpc/include/asm/suspend.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_POWERPC_SUSPEND_H -#define __ASM_POWERPC_SUSPEND_H - -static inline int arch_prepare_suspend(void) { return 0; } - -#endif /* __ASM_POWERPC_SUSPEND_H */ diff --git a/arch/powerpc/kernel/swsusp.c b/arch/powerpc/kernel/swsusp.c index 560c96119501..aa17b76dd427 100644 --- a/arch/powerpc/kernel/swsusp.c +++ b/arch/powerpc/kernel/swsusp.c @@ -10,7 +10,6 @@ */ #include -#include #include #include #include diff --git a/arch/s390/include/asm/suspend.h b/arch/s390/include/asm/suspend.h deleted file mode 100644 index dc75c616eafe..000000000000 --- a/arch/s390/include/asm/suspend.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_S390_SUSPEND_H -#define __ASM_S390_SUSPEND_H - -static inline int arch_prepare_suspend(void) -{ - return 0; -} - -#endif - diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h index 64eb41a063e8..e14567a7e9a1 100644 --- a/arch/sh/include/asm/suspend.h +++ b/arch/sh/include/asm/suspend.h @@ -3,7 +3,6 @@ #ifndef __ASSEMBLY__ #include -static inline int arch_prepare_suspend(void) { return 0; } #include diff --git a/arch/unicore32/include/asm/suspend.h b/arch/unicore32/include/asm/suspend.h index 88a9c0f32b21..65bad75c7e96 100644 --- a/arch/unicore32/include/asm/suspend.h +++ b/arch/unicore32/include/asm/suspend.h @@ -14,7 +14,6 @@ #define __UNICORE_SUSPEND_H__ #ifndef __ASSEMBLY__ -static inline int arch_prepare_suspend(void) { return 0; } #include diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h index fd921c3a6841..487055c8c1aa 100644 --- a/arch/x86/include/asm/suspend_32.h +++ b/arch/x86/include/asm/suspend_32.h @@ -9,8 +9,6 @@ #include #include -static inline int arch_prepare_suspend(void) { return 0; } - /* image of the saved processor state */ struct saved_context { u16 es, fs, gs, ss; diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h index 8d942afae681..09b0bf104156 100644 --- a/arch/x86/include/asm/suspend_64.h +++ b/arch/x86/include/asm/suspend_64.h @@ -9,11 +9,6 @@ #include #include -static inline int arch_prepare_suspend(void) -{ - return 0; -} - /* * Image of the saved processor state, used by the low level ACPI suspend to * RAM code and by the low level hibernation code. diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 6418d8c8cdb2..16aa3bcd6b54 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -25,7 +25,6 @@ #include #include #include -#include #include "power.h" @@ -244,10 +243,6 @@ static int create_image(int platform_mode) { int error; - error = arch_prepare_suspend(); - if (error) - return error; - error = dpm_suspend_noirq(PMSG_FREEZE); if (error) { printk(KERN_ERR "PM: Some devices failed to power down, " -- cgit v1.2.3 From f42a9813fbf930fea3bdd0524dcb43c7feb0c977 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 24 May 2011 23:36:06 +0200 Subject: PM / Hibernate: Update kerneldoc comments in hibernate.c Some of the kerneldoc comments in kernel/power/hibernate.c are outdated and some of them don't adhere to the kernel's standards. Update them and make them look in a consistent way. Signed-off-by: Rafael J. Wysocki Acked-by: Randy Dunlap --- kernel/power/hibernate.c | 194 +++++++++++++++++++++++++---------------------- 1 file changed, 104 insertions(+), 90 deletions(-) diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 16aa3bcd6b54..8f7b1db1ece1 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -54,10 +54,9 @@ static int hibernation_mode = HIBERNATION_SHUTDOWN; static const struct platform_hibernation_ops *hibernation_ops; /** - * hibernation_set_ops - set the global hibernate operations - * @ops: the hibernation operations to use in subsequent hibernation transitions + * hibernation_set_ops - Set the global hibernate operations. + * @ops: Hibernation operations to use in subsequent hibernation transitions. */ - void hibernation_set_ops(const struct platform_hibernation_ops *ops) { if (ops && !(ops->begin && ops->end && ops->pre_snapshot @@ -114,10 +113,9 @@ static int hibernation_test(int level) { return 0; } #endif /* !CONFIG_PM_DEBUG */ /** - * platform_begin - tell the platform driver that we're starting - * hibernation + * platform_begin - Call platform to start hibernation. + * @platform_mode: Whether or not to use the platform driver. */ - static int platform_begin(int platform_mode) { return (platform_mode && hibernation_ops) ? @@ -125,10 +123,9 @@ static int platform_begin(int platform_mode) } /** - * platform_end - tell the platform driver that we've entered the - * working state + * platform_end - Call platform to finish transition to the working state. + * @platform_mode: Whether or not to use the platform driver. */ - static void platform_end(int platform_mode) { if (platform_mode && hibernation_ops) @@ -136,8 +133,11 @@ static void platform_end(int platform_mode) } /** - * platform_pre_snapshot - prepare the machine for hibernation using the - * platform driver if so configured and return an error code if it fails + * platform_pre_snapshot - Call platform to prepare the machine for hibernation. + * @platform_mode: Whether or not to use the platform driver. + * + * Use the platform driver to prepare the system for creating a hibernate image, + * if so configured, and return an error code if that fails. */ static int platform_pre_snapshot(int platform_mode) @@ -147,10 +147,14 @@ static int platform_pre_snapshot(int platform_mode) } /** - * platform_leave - prepare the machine for switching to the normal mode - * of operation using the platform driver (called with interrupts disabled) + * platform_leave - Call platform to prepare a transition to the working state. + * @platform_mode: Whether or not to use the platform driver. + * + * Use the platform driver prepare to prepare the machine for switching to the + * normal mode of operation. + * + * This routine is called on one CPU with interrupts disabled. */ - static void platform_leave(int platform_mode) { if (platform_mode && hibernation_ops) @@ -158,10 +162,14 @@ static void platform_leave(int platform_mode) } /** - * platform_finish - switch the machine to the normal mode of operation - * using the platform driver (must be called after platform_prepare()) + * platform_finish - Call platform to switch the system to the working state. + * @platform_mode: Whether or not to use the platform driver. + * + * Use the platform driver to switch the machine to the normal mode of + * operation. + * + * This routine must be called after platform_prepare(). */ - static void platform_finish(int platform_mode) { if (platform_mode && hibernation_ops) @@ -169,11 +177,15 @@ static void platform_finish(int platform_mode) } /** - * platform_pre_restore - prepare the platform for the restoration from a - * hibernation image. If the restore fails after this function has been - * called, platform_restore_cleanup() must be called. + * platform_pre_restore - Prepare for hibernate image restoration. + * @platform_mode: Whether or not to use the platform driver. + * + * Use the platform driver to prepare the system for resume from a hibernation + * image. + * + * If the restore fails after this function has been called, + * platform_restore_cleanup() must be called. */ - static int platform_pre_restore(int platform_mode) { return (platform_mode && hibernation_ops) ? @@ -181,12 +193,16 @@ static int platform_pre_restore(int platform_mode) } /** - * platform_restore_cleanup - switch the platform to the normal mode of - * operation after a failing restore. If platform_pre_restore() has been - * called before the failing restore, this function must be called too, - * regardless of the result of platform_pre_restore(). + * platform_restore_cleanup - Switch to the working state after failing restore. + * @platform_mode: Whether or not to use the platform driver. + * + * Use the platform driver to switch the system to the normal mode of operation + * after a failing restore. + * + * If platform_pre_restore() has been called before the failing restore, this + * function must be called too, regardless of the result of + * platform_pre_restore(). */ - static void platform_restore_cleanup(int platform_mode) { if (platform_mode && hibernation_ops) @@ -194,10 +210,9 @@ static void platform_restore_cleanup(int platform_mode) } /** - * platform_recover - recover the platform from a failure to suspend - * devices. + * platform_recover - Recover from a failure to suspend devices. + * @platform_mode: Whether or not to use the platform driver. */ - static void platform_recover(int platform_mode) { if (platform_mode && hibernation_ops && hibernation_ops->recover) @@ -205,13 +220,12 @@ static void platform_recover(int platform_mode) } /** - * swsusp_show_speed - print the time elapsed between two events. - * @start: Starting event. - * @stop: Final event. - * @nr_pages - number of pages processed between @start and @stop - * @msg - introductory message to print + * swsusp_show_speed - Print time elapsed between two events during hibernation. + * @start: Starting event. + * @stop: Final event. + * @nr_pages: Number of memory pages processed between @start and @stop. + * @msg: Additional diagnostic message to print. */ - void swsusp_show_speed(struct timeval *start, struct timeval *stop, unsigned nr_pages, char *msg) { @@ -234,11 +248,14 @@ void swsusp_show_speed(struct timeval *start, struct timeval *stop, } /** - * create_image - freeze devices that need to be frozen with interrupts - * off, create the hibernation image and thaw those devices. Control - * reappears in this routine after a restore. + * create_image - Create a hibernation image. + * @platform_mode: Whether or not to use the platform driver. + * + * Execute device drivers' .freeze_noirq() callbacks, create a hibernation image + * and execute the drivers' .thaw_noirq() callbacks. + * + * Control reappears in this routine after the subsequent restore. */ - static int create_image(int platform_mode) { int error; @@ -303,14 +320,11 @@ static int create_image(int platform_mode) } /** - * hibernation_snapshot - quiesce devices and create the hibernation - * snapshot image. - * @platform_mode - if set, use the platform driver, if available, to - * prepare the platform firmware for the power transition. + * hibernation_snapshot - Quiesce devices and create a hibernation image. + * @platform_mode: If set, use platform driver to prepare for the transition. * - * Must be called with pm_mutex held + * This routine must be called with pm_mutex held. */ - int hibernation_snapshot(int platform_mode) { pm_message_t msg = PMSG_RECOVER; @@ -370,13 +384,14 @@ int hibernation_snapshot(int platform_mode) } /** - * resume_target_kernel - prepare devices that need to be suspended with - * interrupts off, restore the contents of highmem that have not been - * restored yet from the image and run the low level code that will restore - * the remaining contents of memory and switch to the just restored target - * kernel. + * resume_target_kernel - Restore system state from a hibernation image. + * @platform_mode: Whether or not to use the platform driver. + * + * Execute device drivers' .freeze_noirq() callbacks, restore the contents of + * highmem that have not been restored yet from the image and run the low-level + * code that will restore the remaining contents of memory and switch to the + * just restored target kernel. */ - static int resume_target_kernel(bool platform_mode) { int error; @@ -444,14 +459,12 @@ static int resume_target_kernel(bool platform_mode) } /** - * hibernation_restore - quiesce devices and restore the hibernation - * snapshot image. If successful, control returns in hibernation_snaphot() - * @platform_mode - if set, use the platform driver, if available, to - * prepare the platform firmware for the transition. + * hibernation_restore - Quiesce devices and restore from a hibernation image. + * @platform_mode: If set, use platform driver to prepare for the transition. * - * Must be called with pm_mutex held + * This routine must be called with pm_mutex held. If it is successful, control + * reappears in the restored target kernel in hibernation_snaphot(). */ - int hibernation_restore(int platform_mode) { int error; @@ -471,10 +484,8 @@ int hibernation_restore(int platform_mode) } /** - * hibernation_platform_enter - enter the hibernation state using the - * platform driver (if available) + * hibernation_platform_enter - Power off the system using the platform driver. */ - int hibernation_platform_enter(void) { int error; @@ -545,12 +556,12 @@ int hibernation_platform_enter(void) } /** - * power_down - Shut the machine down for hibernation. + * power_down - Shut the machine down for hibernation. * - * Use the platform driver, if configured so; otherwise try - * to power off or reboot. + * Use the platform driver, if configured, to put the system into the sleep + * state corresponding to hibernation, or try to power it off or reboot, + * depending on the value of hibernation_mode. */ - static void power_down(void) { switch (hibernation_mode) { @@ -587,9 +598,8 @@ static int prepare_processes(void) } /** - * hibernate - The granpappy of the built-in hibernation management + * hibernate - Carry out system hibernation, including saving the image. */ - int hibernate(void) { int error; @@ -667,17 +677,20 @@ int hibernate(void) /** - * software_resume - Resume from a saved image. + * software_resume - Resume from a saved hibernation image. + * + * This routine is called as a late initcall, when all devices have been + * discovered and initialized already. * - * Called as a late_initcall (so all devices are discovered and - * initialized), we call swsusp to see if we have a saved image or not. - * If so, we quiesce devices, the restore the saved image. We will - * return above (in hibernate() ) if everything goes well. - * Otherwise, we fail gracefully and return to the normally - * scheduled program. + * The image reading code is called to see if there is a hibernation image + * available for reading. If that is the case, devices are quiesced and the + * contents of memory is restored from the saved image. * + * If this is successful, control reappears in the restored target kernel in + * hibernation_snaphot() which returns to hibernate(). Otherwise, the routine + * attempts to recover gracefully and make the kernel return to the normal mode + * of operation. */ - static int software_resume(void) { int error; @@ -807,21 +820,17 @@ static const char * const hibernation_modes[] = { [HIBERNATION_TESTPROC] = "testproc", }; -/** - * disk - Control hibernation mode - * - * Suspend-to-disk can be handled in several ways. We have a few options - * for putting the system to sleep - using the platform driver (e.g. ACPI - * or other hibernation_ops), powering off the system or rebooting the - * system (for testing) as well as the two test modes. +/* + * /sys/power/disk - Control hibernation mode. * - * The system can support 'platform', and that is known a priori (and - * encoded by the presence of hibernation_ops). However, the user may - * choose 'shutdown' or 'reboot' as alternatives, as well as one fo the - * test modes, 'test' or 'testproc'. + * Hibernation can be handled in several ways. There are a few different ways + * to put the system into the sleep state: using the platform driver (e.g. ACPI + * or other hibernation_ops), powering it off or rebooting it (for testing + * mostly), or using one of the two available test modes. * - * show() will display what the mode is currently set to. - * store() will accept one of + * The sysfs file /sys/power/disk provides an interface for selecting the + * hibernation mode to use. Reading from this file causes the available modes + * to be printed. There are 5 modes that can be supported: * * 'platform' * 'shutdown' @@ -829,8 +838,14 @@ static const char * const hibernation_modes[] = { * 'test' * 'testproc' * - * It will only change to 'platform' if the system - * supports it (as determined by having hibernation_ops). + * If a platform hibernation driver is in use, 'platform' will be supported + * and will be used by default. Otherwise, 'shutdown' will be used by default. + * The selected option (i.e. the one corresponding to the current value of + * hibernation_mode) is enclosed by a square bracket. + * + * To select a given hibernation mode it is necessary to write the mode's + * string representation (as returned by reading from /sys/power/disk) back + * into /sys/power/disk. */ static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr, @@ -863,7 +878,6 @@ static ssize_t disk_show(struct kobject *kobj, struct kobj_attribute *attr, return buf-start; } - static ssize_t disk_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, size_t n) { -- cgit v1.2.3 From 7ccafc5f75c87853f3c49845d5a884f2376e03ce Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Tue, 24 May 2011 16:29:26 -0700 Subject: x86, cpufeature: Update CPU feature RDRND to RDRAND The Intel manual changed the name of the CPUID bit to match the instruction name. We should follow suit for sanity's sake. (See Intel SDM Volume 2, Table 3-20 "Feature Information Returned in the ECX Register".) [ hpa: we can only do this at this time because there are currently no CPUs with this feature on the market, hence this is pre-hardware enabling. However, Cc:'ing stable so that stable can present a consistent ABI. ] Signed-off-by: Kees Cook Link: http://lkml.kernel.org/r/20110524232926.GA27728@outflux.net Signed-off-by: H. Peter Anvin Cc: Fenghua Yu Cc: v2.6.36-39 --- arch/x86/include/asm/cpufeature.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 5dc6acc98dbd..71cc3800712c 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -125,7 +125,7 @@ #define X86_FEATURE_OSXSAVE (4*32+27) /* "" XSAVE enabled in the OS */ #define X86_FEATURE_AVX (4*32+28) /* Advanced Vector Extensions */ #define X86_FEATURE_F16C (4*32+29) /* 16-bit fp conversions */ -#define X86_FEATURE_RDRND (4*32+30) /* The RDRAND instruction */ +#define X86_FEATURE_RDRAND (4*32+30) /* The RDRAND instruction */ #define X86_FEATURE_HYPERVISOR (4*32+31) /* Running on a hypervisor */ /* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */ -- cgit v1.2.3 From d178e3e88f538323eb483df1563c8edfb71fdb39 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 14 Mar 2011 09:01:56 +0200 Subject: mtd: mxc_nand: add support for multiple chips on V21 devices Do the following to add support for up to 4 chips on V21 devices (i.MX25 and i.MX35): * implement .select_chip for V21 * adjust existing NFC_V1_V2_BUF_ADDR writes to take chip select into account * unlock all chip selects at preset_v1_v2() * scan up to 4 devices at .probe This has been tested on i.MX25 with two attached NAND chip (on one die). Signed-off-by: Baruch Siach Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/mxc_nand.c | 51 ++++++++++++++++++++++++++++----------------- 1 file changed, 32 insertions(+), 19 deletions(-) diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 42a95fb41504..b4efdb704ed2 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -56,8 +56,14 @@ #define NFC_V1_V2_WRPROT (host->regs + 0x12) #define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14) #define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16) -#define NFC_V21_UNLOCKSTART_BLKADDR (host->regs + 0x20) -#define NFC_V21_UNLOCKEND_BLKADDR (host->regs + 0x22) +#define NFC_V21_UNLOCKSTART_BLKADDR0 (host->regs + 0x20) +#define NFC_V21_UNLOCKSTART_BLKADDR1 (host->regs + 0x24) +#define NFC_V21_UNLOCKSTART_BLKADDR2 (host->regs + 0x28) +#define NFC_V21_UNLOCKSTART_BLKADDR3 (host->regs + 0x2c) +#define NFC_V21_UNLOCKEND_BLKADDR0 (host->regs + 0x22) +#define NFC_V21_UNLOCKEND_BLKADDR1 (host->regs + 0x26) +#define NFC_V21_UNLOCKEND_BLKADDR2 (host->regs + 0x2a) +#define NFC_V21_UNLOCKEND_BLKADDR3 (host->regs + 0x2e) #define NFC_V1_V2_NF_WRPRST (host->regs + 0x18) #define NFC_V1_V2_CONFIG1 (host->regs + 0x1a) #define NFC_V1_V2_CONFIG2 (host->regs + 0x1c) @@ -152,6 +158,7 @@ struct mxc_nand_host { int clk_act; int irq; int eccsize; + int active_cs; struct completion op_completion; @@ -445,7 +452,7 @@ static void send_page_v1_v2(struct mtd_info *mtd, unsigned int ops) for (i = 0; i < bufs; i++) { /* NANDFC buffer 0 is used for page read/write */ - writew(i, NFC_V1_V2_BUF_ADDR); + writew((host->active_cs << 4) | i, NFC_V1_V2_BUF_ADDR); writew(ops, NFC_V1_V2_CONFIG2); @@ -470,7 +477,7 @@ static void send_read_id_v1_v2(struct mxc_nand_host *host) struct nand_chip *this = &host->nand; /* NANDFC buffer 0 is used for device ID output */ - writew(0x0, NFC_V1_V2_BUF_ADDR); + writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR); writew(NFC_ID, NFC_V1_V2_CONFIG2); @@ -505,7 +512,7 @@ static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host) uint32_t store; uint16_t ret; - writew(0x0, NFC_V1_V2_BUF_ADDR); + writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR); /* * The device status is stored in main_area0. To @@ -686,24 +693,24 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip) struct nand_chip *nand_chip = mtd->priv; struct mxc_nand_host *host = nand_chip->priv; - switch (chip) { - case -1: + if (chip == -1) { /* Disable the NFC clock */ if (host->clk_act) { clk_disable(host->clk); host->clk_act = 0; } - break; - case 0: + return; + } + + if (!host->clk_act) { /* Enable the NFC clock */ - if (!host->clk_act) { - clk_enable(host->clk); - host->clk_act = 1; - } - break; + clk_enable(host->clk); + host->clk_act = 1; + } - default: - break; + if (nfc_is_v21()) { + host->active_cs = chip; + writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR); } } @@ -834,8 +841,14 @@ static void preset_v1_v2(struct mtd_info *mtd) /* Blocks to be unlocked */ if (nfc_is_v21()) { - writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR); - writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR); + writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0); + writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1); + writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2); + writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3); + writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0); + writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1); + writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2); + writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3); } else if (nfc_is_v1()) { writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR); writew(0x4000, NFC_V1_UNLOCKEND_BLKADDR); @@ -1200,7 +1213,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) irq_control_v1_v2(host, 1); /* first scan to find the device and get the page size */ - if (nand_scan_ident(mtd, 1, NULL)) { + if (nand_scan_ident(mtd, nfc_is_v21() ? 4 : 1, NULL)) { err = -ENXIO; goto escan; } -- cgit v1.2.3 From 8cb2a180abfa7b677c63cddfb21df9cefb27fe2d Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Tue, 22 Mar 2011 14:11:02 +0200 Subject: jffs2: remove unused variables Remove unused 'jffs2_sb_info *c' variable from 'jffs2_lookup()' and 'jffs2_readdir()'. Signed-off-by: Sergey Senozhatsky Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- fs/jffs2/dir.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c index 82faddd1f321..4bca6a2e5c07 100644 --- a/fs/jffs2/dir.c +++ b/fs/jffs2/dir.c @@ -75,7 +75,6 @@ static struct dentry *jffs2_lookup(struct inode *dir_i, struct dentry *target, struct nameidata *nd) { struct jffs2_inode_info *dir_f; - struct jffs2_sb_info *c; struct jffs2_full_dirent *fd = NULL, *fd_list; uint32_t ino = 0; struct inode *inode = NULL; @@ -86,7 +85,6 @@ static struct dentry *jffs2_lookup(struct inode *dir_i, struct dentry *target, return ERR_PTR(-ENAMETOOLONG); dir_f = JFFS2_INODE_INFO(dir_i); - c = JFFS2_SB_INFO(dir_i->i_sb); mutex_lock(&dir_f->sem); @@ -119,7 +117,6 @@ static struct dentry *jffs2_lookup(struct inode *dir_i, struct dentry *target, static int jffs2_readdir(struct file *filp, void *dirent, filldir_t filldir) { struct jffs2_inode_info *f; - struct jffs2_sb_info *c; struct inode *inode = filp->f_path.dentry->d_inode; struct jffs2_full_dirent *fd; unsigned long offset, curofs; @@ -127,7 +124,6 @@ static int jffs2_readdir(struct file *filp, void *dirent, filldir_t filldir) D1(printk(KERN_DEBUG "jffs2_readdir() for dir_i #%lu\n", filp->f_path.dentry->d_inode->i_ino)); f = JFFS2_INODE_INFO(inode); - c = JFFS2_SB_INFO(inode->i_sb); offset = filp->f_pos; -- cgit v1.2.3 From 9c76b4e531735a6b3b73d982d79559b98c66b11b Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 25 Mar 2011 08:48:52 +0100 Subject: mtd: m25p80: add support for the MX25L1606E chip Signed-off-by: Gabor Juhos Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 3fb981d4bb51..1c170019b886 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -668,6 +668,7 @@ static const struct spi_device_id m25p_ids[] = { /* Macronix */ { "mx25l4005a", INFO(0xc22013, 0, 64 * 1024, 8, SECT_4K) }, { "mx25l8005", INFO(0xc22014, 0, 64 * 1024, 16, 0) }, + { "mx25l1606e", INFO(0xc22015, 0, 64 * 1024, 32, SECT_4K) }, { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, 0) }, { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, 0) }, { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, -- cgit v1.2.3 From a626743f579aa743473fd8b9215ca198bacf2ac4 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 18 Mar 2011 21:53:41 -0700 Subject: mtd: nand: renumber conflicting BBT flags The NAND_USE_FLASH_BBT_NO_OOB and NAND_CREATE_EMPTY_BBT flags conflict with the NAND_BBT_SCANBYTE1AND6 and NAND_BBT_DYNAMICSTRUCT flags, respectively. This change will allow us to utilize these options independently. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/nand.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index d44192740f6f..c2b9ac4fbc4a 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -237,9 +237,9 @@ typedef enum { * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch * the OOB area. */ -#define NAND_USE_FLASH_BBT_NO_OOB 0x00100000 +#define NAND_USE_FLASH_BBT_NO_OOB 0x00800000 /* Create an empty BBT with no vendor information if the BBT is available */ -#define NAND_CREATE_EMPTY_BBT 0x00200000 +#define NAND_CREATE_EMPTY_BBT 0x01000000 /* Options set by nand scan */ /* Nand scan has allocated controller struct */ -- cgit v1.2.3 From a2f812df0b3d467db2ae5e3be38c36ff692ff99f Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Fri, 18 Mar 2011 21:53:42 -0700 Subject: mtd: nand: dynamic allocation of flash-based BBT structs It is nicer to dynamically create our badblock patterns than to statically define them. The nand_create_default_bbt_descr() function does a sufficient job of handling various bad block scanning options for either flash-based or non-flash-based BBTs, so we might as well use the function for both cases. This patch simplifies and shortens our code (and removes a TODO that I left a few months ago). Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_bbt.c | 27 ++++----------------------- 1 file changed, 4 insertions(+), 23 deletions(-) diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index af46428286fe..ccbeaa1e4a8e 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -1276,20 +1276,6 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs) * while scanning a device for factory marked good / bad blocks. */ static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; -static struct nand_bbt_descr smallpage_flashbased = { - .options = NAND_BBT_SCAN2NDPAGE, - .offs = NAND_SMALL_BADBLOCK_POS, - .len = 1, - .pattern = scan_ff_pattern -}; - -static struct nand_bbt_descr largepage_flashbased = { - .options = NAND_BBT_SCAN2NDPAGE, - .offs = NAND_LARGE_BADBLOCK_POS, - .len = 2, - .pattern = scan_ff_pattern -}; - static uint8_t scan_agand_pattern[] = { 0x1C, 0x71, 0xC7, 0x1C, 0x71, 0xC7 }; static struct nand_bbt_descr agand_flashbased = { @@ -1355,10 +1341,6 @@ static struct nand_bbt_descr bbt_mirror_no_bbt_descr = { * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when * passed to this function. * - * TODO: Handle other flags, replace other static structs - * (e.g. handle NAND_BBT_FLASH for flash-based BBT, - * replace smallpage_flashbased) - * */ static int nand_create_default_bbt_descr(struct nand_chip *this) { @@ -1422,15 +1404,14 @@ int nand_default_bbt(struct mtd_info *mtd) this->bbt_md = &bbt_mirror_descr; } } - if (!this->badblock_pattern) { - this->badblock_pattern = (mtd->writesize > 512) ? &largepage_flashbased : &smallpage_flashbased; - } } else { this->bbt_td = NULL; this->bbt_md = NULL; - if (!this->badblock_pattern) - nand_create_default_bbt_descr(this); } + + if (!this->badblock_pattern) + nand_create_default_bbt_descr(this); + return nand_scan_bbt(mtd, this->badblock_pattern); } -- cgit v1.2.3 From 9b5705a2bd81e012162ef02eaa96879cd3f370df Mon Sep 17 00:00:00 2001 From: Michal Marek Date: Tue, 5 Apr 2011 16:59:03 +0200 Subject: mtd: denali: drop __TIME__ usage The kernel already prints its build timestamp during boot, no need to repeat it in random drivers and produce different object files each time. Signed-off-by: Michal Marek Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/denali.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 4633f094c510..52d1cf067cd4 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1721,8 +1721,7 @@ static struct pci_driver denali_pci_driver = { static int __devinit denali_init(void) { - printk(KERN_INFO "Spectra MTD driver built on %s @ %s\n", - __DATE__, __TIME__); + printk(KERN_INFO "Spectra MTD driver\n"); return pci_register_driver(&denali_pci_driver); } -- cgit v1.2.3 From 99b17c08bca2810f5910b3027f1b9d82edf7a576 Mon Sep 17 00:00:00 2001 From: Roman Tereshonkov Date: Mon, 11 Apr 2011 12:52:01 +0300 Subject: mtd: onenand: add ecclayout and subpage_sft for non-flex 4KiB page onenand So as the ecclayout and suppage size for 4KiB page Flex- and none-Flex OneNAND are different the new values for none-Flex 4KiB page OneNAND memory are added. The introduced ecclayout and suppage size are based on specification 4Gib M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010 For eccpos we expose only 64 bytes out of 72, for oobfree the spare area fields marked as "Managed by internal ECC logic for Logical Sector Number area" are used. Signed-off-by: Roman Tereshonkov Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/onenand_base.c | 46 +++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 6 deletions(-) diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 56a8b2005bda..d27f93b354e8 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -65,11 +65,11 @@ MODULE_PARM_DESC(otp, "Corresponding behaviour of OneNAND in OTP" " : 2 -> 1st Block lock" " : 3 -> BOTH OTP Block and 1st Block lock"); -/** - * onenand_oob_128 - oob info for Flex-Onenand with 4KB page - * For now, we expose only 64 out of 80 ecc bytes +/* + * flexonenand_oob_128 - oob info for Flex-Onenand with 4KB page + * For now, we expose only 64 out of 80 ecc bytes */ -static struct nand_ecclayout onenand_oob_128 = { +static struct nand_ecclayout flexonenand_oob_128 = { .eccbytes = 64, .eccpos = { 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, @@ -86,6 +86,35 @@ static struct nand_ecclayout onenand_oob_128 = { } }; +/* + * onenand_oob_128 - oob info for OneNAND with 4KB page + * + * Based on specification: + * 4Gb M-die OneNAND Flash (KFM4G16Q4M, KFN8G16Q4M). Rev. 1.3, Apr. 2010 + * + * For eccpos we expose only 64 bytes out of 72 (see struct nand_ecclayout) + * + * oobfree uses the spare area fields marked as + * "Managed by internal ECC logic for Logical Sector Number area" + */ +static struct nand_ecclayout onenand_oob_128 = { + .eccbytes = 64, + .eccpos = { + 7, 8, 9, 10, 11, 12, 13, 14, 15, + 23, 24, 25, 26, 27, 28, 29, 30, 31, + 39, 40, 41, 42, 43, 44, 45, 46, 47, + 55, 56, 57, 58, 59, 60, 61, 62, 63, + 71, 72, 73, 74, 75, 76, 77, 78, 79, + 87, 88, 89, 90, 91, 92, 93, 94, 95, + 103, 104, 105, 106, 107, 108, 109, 110, 111, + 119 + }, + .oobfree = { + {2, 3}, {18, 3}, {34, 3}, {50, 3}, + {66, 3}, {82, 3}, {98, 3}, {114, 3} + } +}; + /** * onenand_oob_64 - oob info for large (2KB) page */ @@ -4018,8 +4047,13 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) */ switch (mtd->oobsize) { case 128: - this->ecclayout = &onenand_oob_128; - mtd->subpage_sft = 0; + if (FLEXONENAND(this)) { + this->ecclayout = &flexonenand_oob_128; + mtd->subpage_sft = 0; + } else { + this->ecclayout = &onenand_oob_128; + mtd->subpage_sft = 2; + } break; case 64: this->ecclayout = &onenand_oob_64; -- cgit v1.2.3 From c9ddab25d1b62baead4b0c5de562f1fce026dcfd Mon Sep 17 00:00:00 2001 From: Gernot Hoyler Date: Mon, 11 Apr 2011 15:53:35 +0200 Subject: mtd: cmdset_0002: add CFI 1.5 support for S29GL-S This patch adds CFI 1.5 support for the new Spansion S29GL-S device family. For details, see the data sheet on the Spansion web site: http://www.spansion.com/Support/Datasheets/S29GL_128S_01GS_00_02_e.pdf Signed-off-by: Gernot Hoyler Acked-by: Guillaume LECERF Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0002.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 0b49266840b9..b890f6c964d9 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -462,13 +462,14 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) cfi_fixup_major_minor(cfi, extp); /* - * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4 + * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4, 1.5 * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 * http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf + * http://www.spansion.com/Support/Datasheets/S29GL_128S_01GS_00_02_e.pdf */ if (extp->MajorVersion != '1' || - (extp->MajorVersion == '1' && (extp->MinorVersion < '0' || extp->MinorVersion > '4'))) { + (extp->MajorVersion == '1' && (extp->MinorVersion < '0' || extp->MinorVersion > '5'))) { printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query " "version %c.%c (%#02x/%#02x).\n", extp->MajorVersion, extp->MinorVersion, -- cgit v1.2.3 From ac497c1602555c908c9738fa93b1145f431d1876 Mon Sep 17 00:00:00 2001 From: Jiri Pinkava Date: Wed, 13 Apr 2011 11:59:30 +0200 Subject: mtd: nand: fix S3C NAND clock stop Current implementation of s3c2410_nand_select_chip call clk_disable every time when chip = -1 (de-select). This happend multiple times even if chip was already de-selected. This causes disabling clock even if they are already disabled and due to nature of clock subsytem implementation this causes nand clock to be disabled and newer enabled again. Signed-off-by: Jiri Pinkava Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/s3c2410.c | 59 +++++++++++++++++++++++++++++++++------------- 1 file changed, 43 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 33d832dddfdd..cea775aa9482 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -55,7 +55,7 @@ static int hardware_ecc = 0; #endif #ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP -static int clock_stop = 1; +static const int clock_stop = 1; #else static const int clock_stop = 0; #endif @@ -96,6 +96,12 @@ enum s3c_cpu_type { TYPE_S3C2440, }; +enum s3c_nand_clk_state { + CLOCK_DISABLE = 0, + CLOCK_ENABLE, + CLOCK_SUSPEND, +}; + /* overview of the s3c2410 nand state */ /** @@ -111,6 +117,7 @@ enum s3c_cpu_type { * @mtd_count: The number of MTDs created from this controller. * @save_sel: The contents of @sel_reg to be saved over suspend. * @clk_rate: The clock rate from @clk. + * @clk_state: The current clock state. * @cpu_type: The exact type of this controller. */ struct s3c2410_nand_info { @@ -129,6 +136,7 @@ struct s3c2410_nand_info { int mtd_count; unsigned long save_sel; unsigned long clk_rate; + enum s3c_nand_clk_state clk_state; enum s3c_cpu_type cpu_type; @@ -159,11 +167,33 @@ static struct s3c2410_platform_nand *to_nand_plat(struct platform_device *dev) return dev->dev.platform_data; } -static inline int allow_clk_stop(struct s3c2410_nand_info *info) +static inline int allow_clk_suspend(struct s3c2410_nand_info *info) { return clock_stop; } +/** + * s3c2410_nand_clk_set_state - Enable, disable or suspend NAND clock. + * @info: The controller instance. + * @new_state: State to which clock should be set. + */ +static void s3c2410_nand_clk_set_state(struct s3c2410_nand_info *info, + enum s3c_nand_clk_state new_state) +{ + if (!allow_clk_suspend(info) && new_state == CLOCK_SUSPEND) + return; + + if (info->clk_state == CLOCK_ENABLE) { + if (new_state != CLOCK_ENABLE) + clk_disable(info->clk); + } else { + if (new_state == CLOCK_ENABLE) + clk_enable(info->clk); + } + + info->clk_state = new_state; +} + /* timing calculations */ #define NS_IN_KHZ 1000000 @@ -333,8 +363,8 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) nmtd = this->priv; info = nmtd->info; - if (chip != -1 && allow_clk_stop(info)) - clk_enable(info->clk); + if (chip != -1) + s3c2410_nand_clk_set_state(info, CLOCK_ENABLE); cur = readl(info->sel_reg); @@ -356,8 +386,8 @@ static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip) writel(cur, info->sel_reg); - if (chip == -1 && allow_clk_stop(info)) - clk_disable(info->clk); + if (chip == -1) + s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND); } /* s3c2410_nand_hwcontrol @@ -694,8 +724,7 @@ static int s3c24xx_nand_remove(struct platform_device *pdev) /* free the common resources */ if (info->clk != NULL && !IS_ERR(info->clk)) { - if (!allow_clk_stop(info)) - clk_disable(info->clk); + s3c2410_nand_clk_set_state(info, CLOCK_DISABLE); clk_put(info->clk); } @@ -947,7 +976,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) goto exit_error; } - clk_enable(info->clk); + s3c2410_nand_clk_set_state(info, CLOCK_ENABLE); /* allocate and map the resource */ @@ -1026,9 +1055,9 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) goto exit_error; } - if (allow_clk_stop(info)) { + if (allow_clk_suspend(info)) { dev_info(&pdev->dev, "clock idle support enabled\n"); - clk_disable(info->clk); + s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND); } pr_debug("initialised ok\n"); @@ -1059,8 +1088,7 @@ static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm) writel(info->save_sel | info->sel_bit, info->sel_reg); - if (!allow_clk_stop(info)) - clk_disable(info->clk); + s3c2410_nand_clk_set_state(info, CLOCK_DISABLE); } return 0; @@ -1072,7 +1100,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev) unsigned long sel; if (info) { - clk_enable(info->clk); + s3c2410_nand_clk_set_state(info, CLOCK_ENABLE); s3c2410_nand_inithw(info); /* Restore the state of the nFCE line. */ @@ -1082,8 +1110,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev) sel |= info->save_sel & info->sel_bit; writel(sel, info->sel_reg); - if (allow_clk_stop(info)) - clk_disable(info->clk); + s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND); } return 0; -- cgit v1.2.3 From c2aad6d6585c320ed5e111db5e03d27e901dfa81 Mon Sep 17 00:00:00 2001 From: Jiri Pinkava Date: Wed, 13 Apr 2011 12:26:48 +0200 Subject: mtd: nand: remove doubled chip deselection on (un)lock Chip deselection is already done in nand_release_device. So only duplicate code. Signed-off-by: Jiri Pinkava Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index c54a4cbac6bc..bc1c2e6ae4a4 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -976,9 +976,6 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) ret = __nand_unlock(mtd, ofs, len, 0); out: - /* de-select the NAND device */ - chip->select_chip(mtd, -1); - nand_release_device(mtd); return ret; @@ -1046,9 +1043,6 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) ret = __nand_unlock(mtd, ofs, len, 0x1); out: - /* de-select the NAND device */ - chip->select_chip(mtd, -1); - nand_release_device(mtd); return ret; -- cgit v1.2.3 From 5c39c4c54c585e13a8d6b5a8f64af682e7c68091 Mon Sep 17 00:00:00 2001 From: Hans-Christian Egtvedt Date: Wed, 13 Apr 2011 15:55:17 +0200 Subject: mtd: atmel_nand: add missing include of linux/dmaengine.h Including linux/dmaengine.h fixes the missing definition of the enum dma_ctrl_flags type used in atmel_nand_dma_op function. Signed-off-by: Hans-Christian Egtvedt Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/atmel_nand.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 950646aa4c4b..380912f24ad8 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -30,6 +30,7 @@ #include #include +#include #include #include -- cgit v1.2.3 From 94735ec4044a6d318b83ad3c5794e931ed168d10 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 18 Apr 2011 07:50:37 +0300 Subject: mtd: mtd_blkdevs: fix error path in blktrans_open The 'blktrans_open()' does not handle possible '__get_mtd_device()' failures because it does not check the error code. Moreover, the 'dev->tr->open()' failures are not handled correctly because in this case the function just goes ahead and gets the mtd device, then returns an error. But Instead, it should _not_ try to get the mtd device, then it should put back the module and the kref. This patch fixes the issue. Note, I only compile-tested it. This patch was inspired by a bug report about a similar issue in 2.6.34 kernels sent by Mike Turner to the MTD mailing list: http://lists.infradead.org/pipermail/linux-mtd/2011-April/034980.html Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtd_blkdevs.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index a534e1f0c348..ca385697446e 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -221,15 +221,33 @@ static int blktrans_open(struct block_device *bdev, fmode_t mode) kref_get(&dev->ref); __module_get(dev->tr->owner); - if (dev->mtd) { - ret = dev->tr->open ? dev->tr->open(dev) : 0; - __get_mtd_device(dev->mtd); + if (!dev->mtd) + goto unlock; + + if (dev->tr->open) { + ret = dev->tr->open(dev); + if (ret) + goto error_put; } + ret = __get_mtd_device(dev->mtd); + if (ret) + goto error_release; + unlock: mutex_unlock(&dev->lock); blktrans_dev_put(dev); return ret; + +error_release: + if (dev->tr->release) + dev->tr->release(dev); +error_put: + module_put(dev->tr->owner); + kref_put(&dev->ref, blktrans_dev_release); + mutex_unlock(&dev->lock); + blktrans_dev_put(dev); + return ret; } static int blktrans_release(struct gendisk *disk, fmode_t mode) -- cgit v1.2.3 From a80f1c1f6a15e4eeba5c146ec9c5c0e12458abc5 Mon Sep 17 00:00:00 2001 From: Jan Weitzel Date: Tue, 19 Apr 2011 16:15:34 +0200 Subject: mtd: omap2: mtd split nand_scan in ident and tail nand_scan calls nand_scan_tail and here we got a ecc.layout and calculate oobavail for this layout. After calling nand_scan, we change the layout pointer if OMAP_ECC_HAMMING_CODE_HW_ROMCODE is set. This results in not calcluated oobavail. Mountig as jffs2 is not possible. To fix that nand_scan has to split up in nand_scan_ident and nand_scan_tail setting ecc.layout between these calls. So nand_scan_tail calculates oobvail for the used layout. This is also done in serveral other platforms. Signed-off-by: Jan Weitzel Reviewed-by: Vimal Singh Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/omap2.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index da9a351c9d79..288423f7b7b1 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1073,9 +1073,9 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) /* DIP switches on some boards change between 8 and 16 bit * bus widths for flash. Try the other width if the first try fails. */ - if (nand_scan(&info->mtd, 1)) { + if (nand_scan_ident(&info->mtd, 1, NULL)) { info->nand.options ^= NAND_BUSWIDTH_16; - if (nand_scan(&info->mtd, 1)) { + if (nand_scan_ident(&info->mtd, 1, NULL)) { err = -ENXIO; goto out_release_mem_region; } @@ -1101,6 +1101,12 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) info->nand.ecc.layout = &omap_oobinfo; } + /* second phase scan */ + if (nand_scan_tail(&info->mtd)) { + err = -ENXIO; + goto out_release_mem_region; + } + #ifdef CONFIG_MTD_PARTITIONS err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); if (err > 0) -- cgit v1.2.3 From 431e1ecabddcd7cbba237182ddf431771f98bb4c Mon Sep 17 00:00:00 2001 From: Felix Radensky Date: Mon, 25 Apr 2011 01:57:12 +0300 Subject: mtd: mtdconcat: fix NAND OOB write Currently mtdconcat is broken for NAND. An attemtpt to create JFFS2 filesystem on concatenation of several NAND devices fails with OOB write errors. This patch fixes that problem. Signed-off-by: Felix Radensky Signed-off-by: Artem Bityutskiy Cc: stable@kernel.org Signed-off-by: David Woodhouse --- drivers/mtd/mtdconcat.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c index 5060e608ea5d..e601672a5305 100644 --- a/drivers/mtd/mtdconcat.c +++ b/drivers/mtd/mtdconcat.c @@ -319,7 +319,7 @@ concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) if (!(mtd->flags & MTD_WRITEABLE)) return -EROFS; - ops->retlen = 0; + ops->retlen = ops->oobretlen = 0; for (i = 0; i < concat->num_subdev; i++) { struct mtd_info *subdev = concat->subdev[i]; @@ -334,7 +334,7 @@ concat_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) devops.len = subdev->size - to; err = subdev->write_oob(subdev, to, &devops); - ops->retlen += devops.retlen; + ops->retlen += devops.oobretlen; if (err) return err; -- cgit v1.2.3 From 33b53716bc4b3ff3da2bc41581226424443f9d5a Mon Sep 17 00:00:00 2001 From: Grant Erickson Date: Fri, 8 Apr 2011 08:51:32 -0700 Subject: mtd: create function to perform large allocations Introduce a common function to handle large, contiguous kmalloc buffer allocations by exponentially backing off on the size of the requested kernel transfer buffer until it succeeds or until the requested transfer buffer size falls below the page size. This helps ensure the operation can succeed under low-memory, highly- fragmented situations albeit somewhat more slowly. Artem: so this patch solves the problem that the kernel tries to kmalloc too large buffers, which (a) may fail and does fail - people complain about this, and (b) slows down the system in case of high memory fragmentation, because the kernel starts dropping caches, writing back, swapping, etc. But we do not really have to allocate a lot of memory to do the I/O, we may do this even with as little as one min. I/O unit (NAND page) of RAM. So the idea of this patch is that if the user asks to read or write a lot, we try to kmalloc a lot, with GFP flags which make the kernel _not_ drop caches, etc. If we can allocate it - good, if not - we try to allocate twice as less, and so on, until we reach the min. I/O unit size, which is our last resort allocation and use the normal GFP_KERNEL flag. Artem: re-write the allocation function so that it makes sure the allocated buffer is aligned to the min. I/O size of the flash. Signed-off-by: Grant Erickson Tested-by: Ben Gardiner Tested-by: Stefano Babic Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/mtd.h | 2 ++ 2 files changed, 51 insertions(+) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index da69bc8a5a7d..a50348b60d79 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -638,6 +638,54 @@ int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, return ret; } +/** + * mtd_kmalloc_up_to - allocate a contiguous buffer up to the specified size + * @size: A pointer to the ideal or maximum size of the allocation. Points + * to the actual allocation size on success. + * + * This routine attempts to allocate a contiguous kernel buffer up to + * the specified size, backing off the size of the request exponentially + * until the request succeeds or until the allocation size falls below + * the system page size. This attempts to make sure it does not adversely + * impact system performance, so when allocating more than one page, we + * ask the memory allocator to avoid re-trying, swapping, writing back + * or performing I/O. + * + * Note, this function also makes sure that the allocated buffer is aligned to + * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value. + * + * This is called, for example by mtd_{read,write} and jffs2_scan_medium, + * to handle smaller (i.e. degraded) buffer allocations under low- or + * fragmented-memory situations where such reduced allocations, from a + * requested ideal, are allowed. + * + * Returns a pointer to the allocated buffer on success; otherwise, NULL. + */ +void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size) +{ + gfp_t flags = __GFP_NOWARN | __GFP_WAIT | + __GFP_NORETRY | __GFP_NO_KSWAPD; + size_t min_alloc = max_t(size_t, mtd->writesize, PAGE_SIZE); + void *kbuf; + + *size = min_t(size_t, *size, KMALLOC_MAX_SIZE); + + while (*size > min_alloc) { + kbuf = kmalloc(*size, flags); + if (kbuf) + return kbuf; + + *size >>= 1; + *size = ALIGN(*size, mtd->writesize); + } + + /* + * For the last resort allocation allow 'kmalloc()' to do all sorts of + * things (write-back, dropping caches, etc) by using GFP_KERNEL. + */ + return kmalloc(*size, GFP_KERNEL); +} + EXPORT_SYMBOL_GPL(add_mtd_device); EXPORT_SYMBOL_GPL(del_mtd_device); EXPORT_SYMBOL_GPL(get_mtd_device); @@ -648,6 +696,7 @@ EXPORT_SYMBOL_GPL(__put_mtd_device); EXPORT_SYMBOL_GPL(register_mtd_user); EXPORT_SYMBOL_GPL(unregister_mtd_user); EXPORT_SYMBOL_GPL(default_mtd_writev); +EXPORT_SYMBOL_GPL(mtd_kmalloc_up_to); #ifdef CONFIG_PROC_FS diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 9d5306bad117..06b489a7605b 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -348,6 +348,8 @@ int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen); +void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size); + #ifdef CONFIG_MTD_PARTITIONS void mtd_erase_callback(struct erase_info *instr); #else -- cgit v1.2.3 From 3e45cf5e85a4f344fc4c8c901ac057a2402db125 Mon Sep 17 00:00:00 2001 From: Grant Erickson Date: Fri, 8 Apr 2011 08:51:33 -0700 Subject: mtd: mtdchar: retry large buffer allocations Replace direct call to kmalloc for a potentially large, contiguous buffer allocation with one to mtd_kmalloc_up_to which helps ensure the operation can succeed under low-memory, highly- fragmented situations albeit somewhat more slowly. Signed-off-by: Grant Erickson Tested-by: Ben Gardiner Tested-by: Stefano Babic Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdchar.c | 50 +++++++++++++++++++++++--------------------------- 1 file changed, 23 insertions(+), 27 deletions(-) diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 4c36ef66a46b..f488eabaa7b5 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -166,10 +166,23 @@ static int mtd_close(struct inode *inode, struct file *file) return 0; } /* mtd_close */ -/* FIXME: This _really_ needs to die. In 2.5, we should lock the - userspace buffer down and use it directly with readv/writev. -*/ -#define MAX_KMALLOC_SIZE 0x20000 +/* Back in June 2001, dwmw2 wrote: + * + * FIXME: This _really_ needs to die. In 2.5, we should lock the + * userspace buffer down and use it directly with readv/writev. + * + * The implementation below, using mtd_kmalloc_up_to, mitigates + * allocation failures when the system is under low-memory situations + * or if memory is highly fragmented at the cost of reducing the + * performance of the requested transfer due to a smaller buffer size. + * + * A more complex but more memory-efficient implementation based on + * get_user_pages and iovecs to cover extents of those pages is a + * longer-term goal, as intimated by dwmw2 above. However, for the + * write case, this requires yet more complex head and tail transfer + * handling when those head and tail offsets and sizes are such that + * alignment requirements are not met in the NAND subdriver. + */ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t *ppos) { @@ -179,6 +192,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t size_t total_retlen=0; int ret=0; int len; + size_t size = count; char *kbuf; DEBUG(MTD_DEBUG_LEVEL0,"MTD_read\n"); @@ -189,23 +203,12 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t if (!count) return 0; - /* FIXME: Use kiovec in 2.5 to lock down the user's buffers - and pass them directly to the MTD functions */ - - if (count > MAX_KMALLOC_SIZE) - kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL); - else - kbuf=kmalloc(count, GFP_KERNEL); - + kbuf = mtd_kmalloc_up_to(mtd, &size); if (!kbuf) return -ENOMEM; while (count) { - - if (count > MAX_KMALLOC_SIZE) - len = MAX_KMALLOC_SIZE; - else - len = count; + len = min_t(size_t, count, size); switch (mfi->mode) { case MTD_MODE_OTP_FACTORY: @@ -268,6 +271,7 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count { struct mtd_file_info *mfi = file->private_data; struct mtd_info *mtd = mfi->mtd; + size_t size = count; char *kbuf; size_t retlen; size_t total_retlen=0; @@ -285,20 +289,12 @@ static ssize_t mtd_write(struct file *file, const char __user *buf, size_t count if (!count) return 0; - if (count > MAX_KMALLOC_SIZE) - kbuf=kmalloc(MAX_KMALLOC_SIZE, GFP_KERNEL); - else - kbuf=kmalloc(count, GFP_KERNEL); - + kbuf = mtd_kmalloc_up_to(mtd, &size); if (!kbuf) return -ENOMEM; while (count) { - - if (count > MAX_KMALLOC_SIZE) - len = MAX_KMALLOC_SIZE; - else - len = count; + len = min_t(size_t, count, size); if (copy_from_user(kbuf, buf, len)) { kfree(kbuf); -- cgit v1.2.3 From 1ddd0d9a3177356f2a29c8f3826ad79e1ad18397 Mon Sep 17 00:00:00 2001 From: Grant Erickson Date: Fri, 8 Apr 2011 08:51:34 -0700 Subject: JFFS2: retry large buffer allocations Replace direct call to kmalloc for a potentially large, contiguous buffer allocation with one to mtd_kmalloc_up_to which helps ensure the operation can succeed under low-memory, highly- fragmented situations albeit somewhat more slowly. Signed-off-by: Grant Erickson Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- fs/jffs2/scan.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c index b632dddcb482..8d8cd3419d02 100644 --- a/fs/jffs2/scan.c +++ b/fs/jffs2/scan.c @@ -94,7 +94,7 @@ int jffs2_scan_medium(struct jffs2_sb_info *c) uint32_t buf_size = 0; struct jffs2_summary *s = NULL; /* summary info collected by the scan process */ #ifndef __ECOS - size_t pointlen; + size_t pointlen, try_size; if (c->mtd->point) { ret = c->mtd->point(c->mtd, 0, c->mtd->size, &pointlen, @@ -113,18 +113,21 @@ int jffs2_scan_medium(struct jffs2_sb_info *c) /* For NAND it's quicker to read a whole eraseblock at a time, apparently */ if (jffs2_cleanmarker_oob(c)) - buf_size = c->sector_size; + try_size = c->sector_size; else - buf_size = PAGE_SIZE; + try_size = PAGE_SIZE; - /* Respect kmalloc limitations */ - if (buf_size > 128*1024) - buf_size = 128*1024; + D1(printk(KERN_DEBUG "Trying to allocate readbuf of %zu " + "bytes\n", try_size)); - D1(printk(KERN_DEBUG "Allocating readbuf of %d bytes\n", buf_size)); - flashbuf = kmalloc(buf_size, GFP_KERNEL); + flashbuf = mtd_kmalloc_up_to(c->mtd, &try_size); if (!flashbuf) return -ENOMEM; + + D1(printk(KERN_DEBUG "Allocated readbuf of %zu bytes\n", + try_size)); + + buf_size = (uint32_t)try_size; } if (jffs2_sum_active()) { -- cgit v1.2.3 From 410fe2f02630fa76b5311c06b7411731202d3b68 Mon Sep 17 00:00:00 2001 From: Felix Radensky Date: Tue, 26 Apr 2011 12:36:46 +0300 Subject: mtd: nand: ndfc: add multiple chip select support This patch extends NDFC driver to support all 4 chip selects available in NDFC NAND controller. Tested on custom 460EX board with 2 chip select NAND device. Artem: white-space cleanups Signed-off-by: Felix Radensky Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/ndfc.c | 52 +++++++++++++++++++++++++++++++++---------------- 1 file changed, 35 insertions(+), 17 deletions(-) diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index bbe6d451290d..7ba65553d6ad 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -33,6 +33,7 @@ #include #include +#define NDFC_MAX_CS 4 struct ndfc_controller { struct platform_device *ofdev; @@ -46,12 +47,13 @@ struct ndfc_controller { #endif }; -static struct ndfc_controller ndfc_ctrl; +static struct ndfc_controller ndfc_ctrl[NDFC_MAX_CS]; static void ndfc_select_chip(struct mtd_info *mtd, int chip) { uint32_t ccr; - struct ndfc_controller *ndfc = &ndfc_ctrl; + struct nand_chip *nchip = mtd->priv; + struct ndfc_controller *ndfc = nchip->priv; ccr = in_be32(ndfc->ndfcbase + NDFC_CCR); if (chip >= 0) { @@ -64,7 +66,8 @@ static void ndfc_select_chip(struct mtd_info *mtd, int chip) static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - struct ndfc_controller *ndfc = &ndfc_ctrl; + struct nand_chip *chip = mtd->priv; + struct ndfc_controller *ndfc = chip->priv; if (cmd == NAND_CMD_NONE) return; @@ -77,7 +80,8 @@ static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) static int ndfc_ready(struct mtd_info *mtd) { - struct ndfc_controller *ndfc = &ndfc_ctrl; + struct nand_chip *chip = mtd->priv; + struct ndfc_controller *ndfc = chip->priv; return in_be32(ndfc->ndfcbase + NDFC_STAT) & NDFC_STAT_IS_READY; } @@ -85,7 +89,8 @@ static int ndfc_ready(struct mtd_info *mtd) static void ndfc_enable_hwecc(struct mtd_info *mtd, int mode) { uint32_t ccr; - struct ndfc_controller *ndfc = &ndfc_ctrl; + struct nand_chip *chip = mtd->priv; + struct ndfc_controller *ndfc = chip->priv; ccr = in_be32(ndfc->ndfcbase + NDFC_CCR); ccr |= NDFC_CCR_RESET_ECC; @@ -96,7 +101,8 @@ static void ndfc_enable_hwecc(struct mtd_info *mtd, int mode) static int ndfc_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { - struct ndfc_controller *ndfc = &ndfc_ctrl; + struct nand_chip *chip = mtd->priv; + struct ndfc_controller *ndfc = chip->priv; uint32_t ecc; uint8_t *p = (uint8_t *)&ecc; @@ -119,7 +125,8 @@ static int ndfc_calculate_ecc(struct mtd_info *mtd, */ static void ndfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { - struct ndfc_controller *ndfc = &ndfc_ctrl; + struct nand_chip *chip = mtd->priv; + struct ndfc_controller *ndfc = chip->priv; uint32_t *p = (uint32_t *) buf; for(;len > 0; len -= 4) @@ -128,7 +135,8 @@ static void ndfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) static void ndfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { - struct ndfc_controller *ndfc = &ndfc_ctrl; + struct nand_chip *chip = mtd->priv; + struct ndfc_controller *ndfc = chip->priv; uint32_t *p = (uint32_t *) buf; for(;len > 0; len -= 4) @@ -137,7 +145,8 @@ static void ndfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) static int ndfc_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { - struct ndfc_controller *ndfc = &ndfc_ctrl; + struct nand_chip *chip = mtd->priv; + struct ndfc_controller *ndfc = chip->priv; uint32_t *p = (uint32_t *) buf; for(;len > 0; len -= 4) @@ -179,6 +188,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc, chip->ecc.mode = NAND_ECC_HW; chip->ecc.size = 256; chip->ecc.bytes = 3; + chip->priv = ndfc; ndfc->mtd.priv = chip; ndfc->mtd.owner = THIS_MODULE; @@ -227,15 +237,10 @@ err: static int __devinit ndfc_probe(struct platform_device *ofdev) { - struct ndfc_controller *ndfc = &ndfc_ctrl; + struct ndfc_controller *ndfc; const __be32 *reg; u32 ccr; - int err, len; - - spin_lock_init(&ndfc->ndfc_control.lock); - init_waitqueue_head(&ndfc->ndfc_control.wq); - ndfc->ofdev = ofdev; - dev_set_drvdata(&ofdev->dev, ndfc); + int err, len, cs; /* Read the reg property to get the chip select */ reg = of_get_property(ofdev->dev.of_node, "reg", &len); @@ -243,7 +248,20 @@ static int __devinit ndfc_probe(struct platform_device *ofdev) dev_err(&ofdev->dev, "unable read reg property (%d)\n", len); return -ENOENT; } - ndfc->chip_select = be32_to_cpu(reg[0]); + + cs = be32_to_cpu(reg[0]); + if (cs >= NDFC_MAX_CS) { + dev_err(&ofdev->dev, "invalid CS number (%d)\n", cs); + return -EINVAL; + } + + ndfc = &ndfc_ctrl[cs]; + ndfc->chip_select = cs; + + spin_lock_init(&ndfc->ndfc_control.lock); + init_waitqueue_head(&ndfc->ndfc_control.wq); + ndfc->ofdev = ofdev; + dev_set_drvdata(&ofdev->dev, ndfc); ndfc->ndfcbase = of_iomap(ofdev->dev.of_node, 0); if (!ndfc->ndfcbase) { -- cgit v1.2.3 From 26d9be11485ea8c1102c3e8eaa7667412eef4950 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Thu, 28 Apr 2011 20:26:59 +0300 Subject: mtd: return badblockbits back In commit c7b28e25cb9beb943aead770ff14551b55fa8c79 the initialization of the backblockbits was accidentally removed. This patch returns it back, because otherwise some NAND drivers are broken. This problem was reported by "Saxena, Parth " here: http://lists.infradead.org/pipermail/linux-mtd/2011-April/035221.html Reported-by: Saxena, Parth Signed-off-by: Artem Bityutskiy Tested-by: Saxena, Parth Acked-by: Saxena, Parth Acked-by: Brian Norris Cc: stable@kernel.org [2.6.36+] Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index bc1c2e6ae4a4..2201ca70af24 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3106,6 +3106,8 @@ ident_done: chip->chip_shift += 32 - 1; } + chip->badblockbits = 8; + /* Set the bad block position */ if (mtd->writesize > 512 || (busw & NAND_BUSWIDTH_16)) chip->badblockpos = NAND_LARGE_BADBLOCK_POS; -- cgit v1.2.3 From eff3bba61fc19a64a1ca56343e38b6506bef9dea Mon Sep 17 00:00:00 2001 From: "john.maxin@nokia.com" Date: Fri, 6 May 2011 09:17:21 +0000 Subject: mtd: onenand: add missing check Coverity has reported that inside the function "onenand_block_by_block_erase()" in onenand_base.c, we should add a check to prevent the incrementing of possible NULL value for "region" Signed-off-by: Maxin B. John Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/onenand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index d27f93b354e8..289ee3b1b030 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -2453,7 +2453,7 @@ static int onenand_block_by_block_erase(struct mtd_info *mtd, len -= block_size; addr += block_size; - if (addr == region_end) { + if (region && addr == region_end) { if (!len) break; region++; -- cgit v1.2.3 From 84457949e4921f15548a9d317a4a4318b3c3af75 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Fri, 6 May 2011 15:28:55 +0100 Subject: mtd: denali: convert to generic DMA API Rather than using the PCI specific DMA API, convert to the generic DMA API so that we can use the Denali NAND controller on other bus types. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/denali.c | 82 ++++++++++++++++++++++------------------------- drivers/mtd/nand/denali.h | 2 +- 2 files changed, 40 insertions(+), 44 deletions(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 52d1cf067cd4..3184eb9bdd57 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include @@ -192,7 +193,7 @@ static void reset_bank(struct denali_nand_info *denali) irq_status = wait_for_irq(denali, irq_mask); if (irq_status & operation_timeout[denali->flash_bank]) - dev_err(&denali->dev->dev, "reset bank failed.\n"); + dev_err(denali->dev, "reset bank failed.\n"); } /* Reset the flash controller */ @@ -200,7 +201,7 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) { uint32_t i; - dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n", + dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) @@ -216,7 +217,7 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) cpu_relax(); if (ioread32(denali->flash_reg + intr_status_addresses[i]) & operation_timeout[i]) - dev_dbg(&denali->dev->dev, + dev_dbg(denali->dev, "NAND Reset operation timed out on bank %d\n", i); } @@ -254,7 +255,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, uint16_t acc_clks; uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt; - dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n", + dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); en_lo = CEIL_DIV(Trp[mode], CLK_X); @@ -291,7 +292,7 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali, acc_clks++; if ((data_invalid - acc_clks * CLK_X) < 2) - dev_warn(&denali->dev->dev, "%s, Line %d: Warning!\n", + dev_warn(denali->dev, "%s, Line %d: Warning!\n", __FILE__, __LINE__); addr_2_data = CEIL_DIV(Tadl[mode], CLK_X); @@ -419,7 +420,7 @@ static void get_hynix_nand_para(struct denali_nand_info *denali, #endif break; default: - dev_warn(&denali->dev->dev, + dev_warn(denali->dev, "Spectra: Unknown Hynix NAND (Device ID: 0x%x)." "Will use default parameter values instead.\n", device_id); @@ -441,7 +442,7 @@ static void find_valid_banks(struct denali_nand_info *denali) index_addr_read_data(denali, (uint32_t)(MODE_11 | (i << 24) | 2), &id[i]); - dev_dbg(&denali->dev->dev, + dev_dbg(denali->dev, "Return 1st ID for bank[%d]: %x\n", i, id[i]); if (i == 0) { @@ -461,13 +462,13 @@ static void find_valid_banks(struct denali_nand_info *denali) * Multichip support is not enabled. */ if (denali->total_used_banks != 1) { - dev_err(&denali->dev->dev, + dev_err(denali->dev, "Sorry, Intel CE4100 only supports " "a single NAND device.\n"); BUG(); } } - dev_dbg(&denali->dev->dev, + dev_dbg(denali->dev, "denali->total_used_banks: %d\n", denali->total_used_banks); } @@ -501,7 +502,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) uint32_t id_bytes[5], addr; uint8_t i, maf_id, device_id; - dev_dbg(&denali->dev->dev, + dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); @@ -530,7 +531,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) get_hynix_nand_para(denali, device_id); } - dev_info(&denali->dev->dev, + dev_info(denali->dev, "Dump timing register values:" "acc_clks: %d, re_2_we: %d, re_2_re: %d\n" "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n" @@ -560,7 +561,7 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali) static void denali_set_intr_modes(struct denali_nand_info *denali, uint16_t INT_ENABLE) { - dev_dbg(&denali->dev->dev, "%s, Line %d, Function: %s\n", + dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); if (INT_ENABLE) @@ -800,7 +801,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) { - dev_err(&denali->dev->dev, + dev_err(denali->dev, "cmd, page, addr on timeout " "(0x%x, 0x%x, 0x%x)\n", cmd, denali->page, addr); @@ -875,11 +876,11 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) { - dev_err(&denali->dev->dev, "OOB write failed\n"); + dev_err(denali->dev, "OOB write failed\n"); status = -EIO; } } else { - dev_err(&denali->dev->dev, "unable to send pipeline command\n"); + dev_err(denali->dev, "unable to send pipeline command\n"); status = -EIO; } return status; @@ -904,7 +905,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) - dev_err(&denali->dev->dev, "page on OOB timeout %d\n", + dev_err(denali->dev, "page on OOB timeout %d\n", denali->page); /* We set the device back to MAIN_ACCESS here as I observed @@ -1045,7 +1046,6 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, bool raw_xfer) { struct denali_nand_info *denali = mtd_to_denali(mtd); - struct pci_dev *pci_dev = denali->dev; dma_addr_t addr = denali->buf.dma_buf; size_t size = denali->mtd.writesize + denali->mtd.oobsize; @@ -1071,7 +1071,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, mtd->oobsize); } - pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_TODEVICE); + dma_sync_single_for_device(denali->dev, addr, size, DMA_TO_DEVICE); clear_interrupts(denali); denali_enable_dma(denali, true); @@ -1082,7 +1082,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, irq_status = wait_for_irq(denali, irq_mask); if (irq_status == 0) { - dev_err(&denali->dev->dev, + dev_err(denali->dev, "timeout on write_page (type = %d)\n", raw_xfer); denali->status = @@ -1091,7 +1091,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, } denali_enable_dma(denali, false); - pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_TODEVICE); + dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE); } /* NAND core entry points */ @@ -1139,7 +1139,6 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - struct pci_dev *pci_dev = denali->dev; dma_addr_t addr = denali->buf.dma_buf; size_t size = denali->mtd.writesize + denali->mtd.oobsize; @@ -1150,7 +1149,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, bool check_erased_page = false; if (page != denali->page) { - dev_err(&denali->dev->dev, "IN %s: page %d is not" + dev_err(denali->dev, "IN %s: page %d is not" " equal to denali->page %d, investigate!!", __func__, page, denali->page); BUG(); @@ -1159,7 +1158,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, setup_ecc_for_xfer(denali, true, false); denali_enable_dma(denali, true); - pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_FROMDEVICE); + dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); clear_interrupts(denali); denali_setup_dma(denali, DENALI_READ); @@ -1167,7 +1166,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); - pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE); + dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); memcpy(buf, denali->buf.buf, mtd->writesize); @@ -1192,7 +1191,6 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - struct pci_dev *pci_dev = denali->dev; dma_addr_t addr = denali->buf.dma_buf; size_t size = denali->mtd.writesize + denali->mtd.oobsize; @@ -1201,7 +1199,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP; if (page != denali->page) { - dev_err(&denali->dev->dev, "IN %s: page %d is not" + dev_err(denali->dev, "IN %s: page %d is not" " equal to denali->page %d, investigate!!", __func__, page, denali->page); BUG(); @@ -1210,7 +1208,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, setup_ecc_for_xfer(denali, false, true); denali_enable_dma(denali, true); - pci_dma_sync_single_for_device(pci_dev, addr, size, PCI_DMA_FROMDEVICE); + dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); clear_interrupts(denali); denali_setup_dma(denali, DENALI_READ); @@ -1218,7 +1216,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, /* wait for operation to complete */ irq_status = wait_for_irq(denali, irq_mask); - pci_dma_sync_single_for_cpu(pci_dev, addr, size, PCI_DMA_FROMDEVICE); + dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE); denali_enable_dma(denali, false); @@ -1330,7 +1328,7 @@ static int denali_ecc_calculate(struct mtd_info *mtd, const uint8_t *data, uint8_t *ecc_code) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dev_err(&denali->dev->dev, + dev_err(denali->dev, "denali_ecc_calculate called unexpectedly\n"); BUG(); return -EIO; @@ -1340,7 +1338,7 @@ static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, uint8_t *read_ecc, uint8_t *calc_ecc) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dev_err(&denali->dev->dev, + dev_err(denali->dev, "denali_ecc_correct called unexpectedly\n"); BUG(); return -EIO; @@ -1349,7 +1347,7 @@ static int denali_ecc_correct(struct mtd_info *mtd, uint8_t *data, static void denali_ecc_hwctl(struct mtd_info *mtd, int mode) { struct denali_nand_info *denali = mtd_to_denali(mtd); - dev_err(&denali->dev->dev, + dev_err(denali->dev, "denali_ecc_hwctl called unexpectedly\n"); BUG(); } @@ -1484,24 +1482,22 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } /* Is 32-bit DMA supported? */ - ret = pci_set_dma_mask(dev, DMA_BIT_MASK(32)); - + ret = dma_set_mask(&dev->dev, DMA_BIT_MASK(32)); if (ret) { printk(KERN_ERR "Spectra: no usable DMA configuration\n"); goto failed_enable_dev; } - denali->buf.dma_buf = - pci_map_single(dev, denali->buf.buf, - DENALI_BUF_SIZE, - PCI_DMA_BIDIRECTIONAL); + denali->buf.dma_buf = dma_map_single(&dev->dev, denali->buf.buf, + DENALI_BUF_SIZE, + DMA_BIDIRECTIONAL); - if (pci_dma_mapping_error(dev, denali->buf.dma_buf)) { + if (dma_mapping_error(&dev->dev, denali->buf.dma_buf)) { dev_err(&dev->dev, "Spectra: failed to map DMA buffer\n"); goto failed_enable_dev; } pci_set_master(dev); - denali->dev = dev; + denali->dev = &dev->dev; denali->mtd.dev.parent = &dev->dev; ret = pci_request_regions(dev, DENALI_NAND_NAME); @@ -1681,8 +1677,8 @@ failed_remap_reg: failed_req_regions: pci_release_regions(dev); failed_dma_map: - pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, - PCI_DMA_BIDIRECTIONAL); + dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE, + DMA_BIDIRECTIONAL); failed_enable_dev: pci_disable_device(dev); failed_alloc_memery: @@ -1704,8 +1700,8 @@ static void denali_pci_remove(struct pci_dev *dev) iounmap(denali->flash_mem); pci_release_regions(dev); pci_disable_device(dev); - pci_unmap_single(dev, denali->buf.dma_buf, DENALI_BUF_SIZE, - PCI_DMA_BIDIRECTIONAL); + dma_unmap_single(&dev->dev, denali->buf.dma_buf, DENALI_BUF_SIZE, + DMA_BIDIRECTIONAL); pci_set_drvdata(dev, NULL); kfree(denali); } diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 3918bcb1561e..9b875fd23687 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -732,7 +732,7 @@ struct denali_nand_info { int status; int platform; struct nand_buf buf; - struct pci_dev *dev; + struct device *dev; int total_used_banks; uint32_t block; /* stored for future use */ uint16_t page; -- cgit v1.2.3 From 9589bf5bed2936a159fc96c96339f15a512fdfa9 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Fri, 6 May 2011 15:28:56 +0100 Subject: mtd: denali: remove nearly-duplicated register definitions The controller has interrupt enable/status register pairs for each bank (along with ECC and status registers) that differ only in address offset. Rather than providing definitions for each register, make the address a macro so that it scales for devices with different numbers of banks. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/denali.c | 134 +++++++---------- drivers/mtd/nand/denali.h | 371 +++++++--------------------------------------- 2 files changed, 110 insertions(+), 395 deletions(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 3184eb9bdd57..5568640cb3ba 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -45,16 +45,16 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting." /* We define a macro here that combines all interrupts this driver uses into * a single constant value, for convenience. */ -#define DENALI_IRQ_ALL (INTR_STATUS0__DMA_CMD_COMP | \ - INTR_STATUS0__ECC_TRANSACTION_DONE | \ - INTR_STATUS0__ECC_ERR | \ - INTR_STATUS0__PROGRAM_FAIL | \ - INTR_STATUS0__LOAD_COMP | \ - INTR_STATUS0__PROGRAM_COMP | \ - INTR_STATUS0__TIME_OUT | \ - INTR_STATUS0__ERASE_FAIL | \ - INTR_STATUS0__RST_COMP | \ - INTR_STATUS0__ERASE_COMP) +#define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \ + INTR_STATUS__ECC_TRANSACTION_DONE | \ + INTR_STATUS__ECC_ERR | \ + INTR_STATUS__PROGRAM_FAIL | \ + INTR_STATUS__LOAD_COMP | \ + INTR_STATUS__PROGRAM_COMP | \ + INTR_STATUS__TIME_OUT | \ + INTR_STATUS__ERASE_FAIL | \ + INTR_STATUS__RST_COMP | \ + INTR_STATUS__ERASE_COMP) /* indicates whether or not the internal value for the flash bank is * valid or not */ @@ -96,30 +96,6 @@ static const struct pci_device_id denali_pci_ids[] = { { /* end: all zeroes */ } }; - -/* these are static lookup tables that give us easy access to - * registers in the NAND controller. - */ -static const uint32_t intr_status_addresses[4] = {INTR_STATUS0, - INTR_STATUS1, - INTR_STATUS2, - INTR_STATUS3}; - -static const uint32_t device_reset_banks[4] = {DEVICE_RESET__BANK0, - DEVICE_RESET__BANK1, - DEVICE_RESET__BANK2, - DEVICE_RESET__BANK3}; - -static const uint32_t operation_timeout[4] = {INTR_STATUS0__TIME_OUT, - INTR_STATUS1__TIME_OUT, - INTR_STATUS2__TIME_OUT, - INTR_STATUS3__TIME_OUT}; - -static const uint32_t reset_complete[4] = {INTR_STATUS0__RST_COMP, - INTR_STATUS1__RST_COMP, - INTR_STATUS2__RST_COMP, - INTR_STATUS3__RST_COMP}; - /* forward declarations */ static void clear_interrupts(struct denali_nand_info *denali); static uint32_t wait_for_irq(struct denali_nand_info *denali, @@ -181,18 +157,16 @@ static void read_status(struct denali_nand_info *denali) static void reset_bank(struct denali_nand_info *denali) { uint32_t irq_status = 0; - uint32_t irq_mask = reset_complete[denali->flash_bank] | - operation_timeout[denali->flash_bank]; - int bank = 0; + uint32_t irq_mask = INTR_STATUS__RST_COMP | + INTR_STATUS__TIME_OUT; clear_interrupts(denali); - bank = device_reset_banks[denali->flash_bank]; - iowrite32(bank, denali->flash_reg + DEVICE_RESET); + iowrite32(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET); irq_status = wait_for_irq(denali, irq_mask); - if (irq_status & operation_timeout[denali->flash_bank]) + if (irq_status & INTR_STATUS__TIME_OUT) dev_err(denali->dev, "reset bank failed.\n"); } @@ -205,25 +179,24 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) __FILE__, __LINE__, __func__); for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) - iowrite32(reset_complete[i] | operation_timeout[i], - denali->flash_reg + intr_status_addresses[i]); + iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, + denali->flash_reg + INTR_STATUS(i)); for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) { - iowrite32(device_reset_banks[i], - denali->flash_reg + DEVICE_RESET); + iowrite32(1 << i, denali->flash_reg + DEVICE_RESET); while (!(ioread32(denali->flash_reg + - intr_status_addresses[i]) & - (reset_complete[i] | operation_timeout[i]))) + INTR_STATUS(i)) & + (INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT))) cpu_relax(); - if (ioread32(denali->flash_reg + intr_status_addresses[i]) & - operation_timeout[i]) + if (ioread32(denali->flash_reg + INTR_STATUS(i)) & + INTR_STATUS__TIME_OUT) dev_dbg(denali->dev, "NAND Reset operation timed out on bank %d\n", i); } for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) - iowrite32(reset_complete[i] | operation_timeout[i], - denali->flash_reg + intr_status_addresses[i]); + iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, + denali->flash_reg + INTR_STATUS(i)); return PASS; } @@ -481,15 +454,15 @@ static void detect_partition_feature(struct denali_nand_info *denali) * blocks it can't touch. * */ if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) { - if ((ioread32(denali->flash_reg + PERM_SRC_ID_1) & - PERM_SRC_ID_1__SRCID) == SPECTRA_PARTITION_ID) { + if ((ioread32(denali->flash_reg + PERM_SRC_ID(1)) & + PERM_SRC_ID__SRCID) == SPECTRA_PARTITION_ID) { denali->fwblks = - ((ioread32(denali->flash_reg + MIN_MAX_BANK_1) & - MIN_MAX_BANK_1__MIN_VALUE) * + ((ioread32(denali->flash_reg + MIN_MAX_BANK(1)) & + MIN_MAX_BANK__MIN_VALUE) * denali->blksperchip) + - (ioread32(denali->flash_reg + MIN_BLK_ADDR_1) & - MIN_BLK_ADDR_1__VALUE); + (ioread32(denali->flash_reg + MIN_BLK_ADDR(1)) & + MIN_BLK_ADDR__VALUE); } else denali->fwblks = SPECTRA_START_BLOCK; } else @@ -581,6 +554,7 @@ static inline bool is_flash_bank_valid(int flash_bank) static void denali_irq_init(struct denali_nand_info *denali) { uint32_t int_mask = 0; + int i; /* Disable global interrupts */ denali_set_intr_modes(denali, false); @@ -588,10 +562,8 @@ static void denali_irq_init(struct denali_nand_info *denali) int_mask = DENALI_IRQ_ALL; /* Clear all status bits */ - iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS0); - iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS1); - iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS2); - iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS3); + for (i = 0; i < LLD_MAX_FLASH_BANKS; ++i) + iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS(i)); denali_irq_enable(denali, int_mask); } @@ -605,10 +577,10 @@ static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali) static void denali_irq_enable(struct denali_nand_info *denali, uint32_t int_mask) { - iowrite32(int_mask, denali->flash_reg + INTR_EN0); - iowrite32(int_mask, denali->flash_reg + INTR_EN1); - iowrite32(int_mask, denali->flash_reg + INTR_EN2); - iowrite32(int_mask, denali->flash_reg + INTR_EN3); + int i; + + for (i = 0; i < LLD_MAX_FLASH_BANKS; ++i) + iowrite32(int_mask, denali->flash_reg + INTR_EN(i)); } /* This function only returns when an interrupt that this driver cares about @@ -625,7 +597,7 @@ static inline void clear_interrupt(struct denali_nand_info *denali, { uint32_t intr_status_reg = 0; - intr_status_reg = intr_status_addresses[denali->flash_bank]; + intr_status_reg = INTR_STATUS(denali->flash_bank); iowrite32(irq_mask, denali->flash_reg + intr_status_reg); } @@ -646,7 +618,7 @@ static uint32_t read_interrupt_status(struct denali_nand_info *denali) { uint32_t intr_status_reg = 0; - intr_status_reg = intr_status_addresses[denali->flash_bank]; + intr_status_reg = INTR_STATUS(denali->flash_bank); return ioread32(denali->flash_reg + intr_status_reg); } @@ -755,7 +727,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, irq_mask = 0; if (op == DENALI_READ) - irq_mask = INTR_STATUS0__LOAD_COMP; + irq_mask = INTR_STATUS__LOAD_COMP; else if (op == DENALI_WRITE) irq_mask = 0; else @@ -862,8 +834,8 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); uint32_t irq_status = 0; - uint32_t irq_mask = INTR_STATUS0__PROGRAM_COMP | - INTR_STATUS0__PROGRAM_FAIL; + uint32_t irq_mask = INTR_STATUS__PROGRAM_COMP | + INTR_STATUS__PROGRAM_FAIL; int status = 0; denali->page = page; @@ -890,7 +862,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) { struct denali_nand_info *denali = mtd_to_denali(mtd); - uint32_t irq_mask = INTR_STATUS0__LOAD_COMP, + uint32_t irq_mask = INTR_STATUS__LOAD_COMP, irq_status = 0, addr = 0x0, cmd = 0x0; denali->page = page; @@ -945,7 +917,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, { bool check_erased_page = false; - if (irq_status & INTR_STATUS0__ECC_ERR) { + if (irq_status & INTR_STATUS__ECC_ERR) { /* read the ECC errors. we'll ignore them for now */ uint32_t err_address = 0, err_correction_info = 0; uint32_t err_byte = 0, err_sector = 0, err_device = 0; @@ -996,7 +968,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf, * for a while for this interrupt * */ while (!(read_interrupt_status(denali) & - INTR_STATUS0__ECC_TRANSACTION_DONE)) + INTR_STATUS__ECC_TRANSACTION_DONE)) cpu_relax(); clear_interrupts(denali); denali_set_intr_modes(denali, true); @@ -1051,8 +1023,8 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, size_t size = denali->mtd.writesize + denali->mtd.oobsize; uint32_t irq_status = 0; - uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP | - INTR_STATUS0__PROGRAM_FAIL; + uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP | + INTR_STATUS__PROGRAM_FAIL; /* if it is a raw xfer, we want to disable ecc, and send * the spare area. @@ -1086,7 +1058,7 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, "timeout on write_page (type = %d)\n", raw_xfer); denali->status = - (irq_status & INTR_STATUS0__PROGRAM_FAIL) ? + (irq_status & INTR_STATUS__PROGRAM_FAIL) ? NAND_STATUS_FAIL : PASS; } @@ -1144,8 +1116,8 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, size_t size = denali->mtd.writesize + denali->mtd.oobsize; uint32_t irq_status = 0; - uint32_t irq_mask = INTR_STATUS0__ECC_TRANSACTION_DONE | - INTR_STATUS0__ECC_ERR; + uint32_t irq_mask = INTR_STATUS__ECC_TRANSACTION_DONE | + INTR_STATUS__ECC_ERR; bool check_erased_page = false; if (page != denali->page) { @@ -1196,7 +1168,7 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, size_t size = denali->mtd.writesize + denali->mtd.oobsize; uint32_t irq_status = 0; - uint32_t irq_mask = INTR_STATUS0__DMA_CMD_COMP; + uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP; if (page != denali->page) { dev_err(denali->dev, "IN %s: page %d is not" @@ -1269,10 +1241,10 @@ static void denali_erase(struct mtd_info *mtd, int page) index_addr(denali, (uint32_t)cmd, 0x1); /* wait for erase to complete or failure to occur */ - irq_status = wait_for_irq(denali, INTR_STATUS0__ERASE_COMP | - INTR_STATUS0__ERASE_FAIL); + irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP | + INTR_STATUS__ERASE_FAIL); - denali->status = (irq_status & INTR_STATUS0__ERASE_FAIL) ? + denali->status = (irq_status & INTR_STATUS__ERASE_FAIL) ? NAND_STATUS_FAIL : PASS; } diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 9b875fd23687..638668c4b41f 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -211,185 +211,46 @@ #define TRANSFER_MODE 0x400 #define TRANSFER_MODE__VALUE 0x0003 -#define INTR_STATUS0 0x410 -#define INTR_STATUS0__ECC_TRANSACTION_DONE 0x0001 -#define INTR_STATUS0__ECC_ERR 0x0002 -#define INTR_STATUS0__DMA_CMD_COMP 0x0004 -#define INTR_STATUS0__TIME_OUT 0x0008 -#define INTR_STATUS0__PROGRAM_FAIL 0x0010 -#define INTR_STATUS0__ERASE_FAIL 0x0020 -#define INTR_STATUS0__LOAD_COMP 0x0040 -#define INTR_STATUS0__PROGRAM_COMP 0x0080 -#define INTR_STATUS0__ERASE_COMP 0x0100 -#define INTR_STATUS0__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_STATUS0__LOCKED_BLK 0x0400 -#define INTR_STATUS0__UNSUP_CMD 0x0800 -#define INTR_STATUS0__INT_ACT 0x1000 -#define INTR_STATUS0__RST_COMP 0x2000 -#define INTR_STATUS0__PIPE_CMD_ERR 0x4000 -#define INTR_STATUS0__PAGE_XFER_INC 0x8000 - -#define INTR_EN0 0x420 -#define INTR_EN0__ECC_TRANSACTION_DONE 0x0001 -#define INTR_EN0__ECC_ERR 0x0002 -#define INTR_EN0__DMA_CMD_COMP 0x0004 -#define INTR_EN0__TIME_OUT 0x0008 -#define INTR_EN0__PROGRAM_FAIL 0x0010 -#define INTR_EN0__ERASE_FAIL 0x0020 -#define INTR_EN0__LOAD_COMP 0x0040 -#define INTR_EN0__PROGRAM_COMP 0x0080 -#define INTR_EN0__ERASE_COMP 0x0100 -#define INTR_EN0__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_EN0__LOCKED_BLK 0x0400 -#define INTR_EN0__UNSUP_CMD 0x0800 -#define INTR_EN0__INT_ACT 0x1000 -#define INTR_EN0__RST_COMP 0x2000 -#define INTR_EN0__PIPE_CMD_ERR 0x4000 -#define INTR_EN0__PAGE_XFER_INC 0x8000 - -#define PAGE_CNT0 0x430 -#define PAGE_CNT0__VALUE 0x00ff - -#define ERR_PAGE_ADDR0 0x440 -#define ERR_PAGE_ADDR0__VALUE 0xffff - -#define ERR_BLOCK_ADDR0 0x450 -#define ERR_BLOCK_ADDR0__VALUE 0xffff - -#define INTR_STATUS1 0x460 -#define INTR_STATUS1__ECC_TRANSACTION_DONE 0x0001 -#define INTR_STATUS1__ECC_ERR 0x0002 -#define INTR_STATUS1__DMA_CMD_COMP 0x0004 -#define INTR_STATUS1__TIME_OUT 0x0008 -#define INTR_STATUS1__PROGRAM_FAIL 0x0010 -#define INTR_STATUS1__ERASE_FAIL 0x0020 -#define INTR_STATUS1__LOAD_COMP 0x0040 -#define INTR_STATUS1__PROGRAM_COMP 0x0080 -#define INTR_STATUS1__ERASE_COMP 0x0100 -#define INTR_STATUS1__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_STATUS1__LOCKED_BLK 0x0400 -#define INTR_STATUS1__UNSUP_CMD 0x0800 -#define INTR_STATUS1__INT_ACT 0x1000 -#define INTR_STATUS1__RST_COMP 0x2000 -#define INTR_STATUS1__PIPE_CMD_ERR 0x4000 -#define INTR_STATUS1__PAGE_XFER_INC 0x8000 - -#define INTR_EN1 0x470 -#define INTR_EN1__ECC_TRANSACTION_DONE 0x0001 -#define INTR_EN1__ECC_ERR 0x0002 -#define INTR_EN1__DMA_CMD_COMP 0x0004 -#define INTR_EN1__TIME_OUT 0x0008 -#define INTR_EN1__PROGRAM_FAIL 0x0010 -#define INTR_EN1__ERASE_FAIL 0x0020 -#define INTR_EN1__LOAD_COMP 0x0040 -#define INTR_EN1__PROGRAM_COMP 0x0080 -#define INTR_EN1__ERASE_COMP 0x0100 -#define INTR_EN1__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_EN1__LOCKED_BLK 0x0400 -#define INTR_EN1__UNSUP_CMD 0x0800 -#define INTR_EN1__INT_ACT 0x1000 -#define INTR_EN1__RST_COMP 0x2000 -#define INTR_EN1__PIPE_CMD_ERR 0x4000 -#define INTR_EN1__PAGE_XFER_INC 0x8000 - -#define PAGE_CNT1 0x480 -#define PAGE_CNT1__VALUE 0x00ff - -#define ERR_PAGE_ADDR1 0x490 -#define ERR_PAGE_ADDR1__VALUE 0xffff - -#define ERR_BLOCK_ADDR1 0x4a0 -#define ERR_BLOCK_ADDR1__VALUE 0xffff - -#define INTR_STATUS2 0x4b0 -#define INTR_STATUS2__ECC_TRANSACTION_DONE 0x0001 -#define INTR_STATUS2__ECC_ERR 0x0002 -#define INTR_STATUS2__DMA_CMD_COMP 0x0004 -#define INTR_STATUS2__TIME_OUT 0x0008 -#define INTR_STATUS2__PROGRAM_FAIL 0x0010 -#define INTR_STATUS2__ERASE_FAIL 0x0020 -#define INTR_STATUS2__LOAD_COMP 0x0040 -#define INTR_STATUS2__PROGRAM_COMP 0x0080 -#define INTR_STATUS2__ERASE_COMP 0x0100 -#define INTR_STATUS2__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_STATUS2__LOCKED_BLK 0x0400 -#define INTR_STATUS2__UNSUP_CMD 0x0800 -#define INTR_STATUS2__INT_ACT 0x1000 -#define INTR_STATUS2__RST_COMP 0x2000 -#define INTR_STATUS2__PIPE_CMD_ERR 0x4000 -#define INTR_STATUS2__PAGE_XFER_INC 0x8000 - -#define INTR_EN2 0x4c0 -#define INTR_EN2__ECC_TRANSACTION_DONE 0x0001 -#define INTR_EN2__ECC_ERR 0x0002 -#define INTR_EN2__DMA_CMD_COMP 0x0004 -#define INTR_EN2__TIME_OUT 0x0008 -#define INTR_EN2__PROGRAM_FAIL 0x0010 -#define INTR_EN2__ERASE_FAIL 0x0020 -#define INTR_EN2__LOAD_COMP 0x0040 -#define INTR_EN2__PROGRAM_COMP 0x0080 -#define INTR_EN2__ERASE_COMP 0x0100 -#define INTR_EN2__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_EN2__LOCKED_BLK 0x0400 -#define INTR_EN2__UNSUP_CMD 0x0800 -#define INTR_EN2__INT_ACT 0x1000 -#define INTR_EN2__RST_COMP 0x2000 -#define INTR_EN2__PIPE_CMD_ERR 0x4000 -#define INTR_EN2__PAGE_XFER_INC 0x8000 - -#define PAGE_CNT2 0x4d0 -#define PAGE_CNT2__VALUE 0x00ff - -#define ERR_PAGE_ADDR2 0x4e0 -#define ERR_PAGE_ADDR2__VALUE 0xffff - -#define ERR_BLOCK_ADDR2 0x4f0 -#define ERR_BLOCK_ADDR2__VALUE 0xffff - -#define INTR_STATUS3 0x500 -#define INTR_STATUS3__ECC_TRANSACTION_DONE 0x0001 -#define INTR_STATUS3__ECC_ERR 0x0002 -#define INTR_STATUS3__DMA_CMD_COMP 0x0004 -#define INTR_STATUS3__TIME_OUT 0x0008 -#define INTR_STATUS3__PROGRAM_FAIL 0x0010 -#define INTR_STATUS3__ERASE_FAIL 0x0020 -#define INTR_STATUS3__LOAD_COMP 0x0040 -#define INTR_STATUS3__PROGRAM_COMP 0x0080 -#define INTR_STATUS3__ERASE_COMP 0x0100 -#define INTR_STATUS3__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_STATUS3__LOCKED_BLK 0x0400 -#define INTR_STATUS3__UNSUP_CMD 0x0800 -#define INTR_STATUS3__INT_ACT 0x1000 -#define INTR_STATUS3__RST_COMP 0x2000 -#define INTR_STATUS3__PIPE_CMD_ERR 0x4000 -#define INTR_STATUS3__PAGE_XFER_INC 0x8000 - -#define INTR_EN3 0x510 -#define INTR_EN3__ECC_TRANSACTION_DONE 0x0001 -#define INTR_EN3__ECC_ERR 0x0002 -#define INTR_EN3__DMA_CMD_COMP 0x0004 -#define INTR_EN3__TIME_OUT 0x0008 -#define INTR_EN3__PROGRAM_FAIL 0x0010 -#define INTR_EN3__ERASE_FAIL 0x0020 -#define INTR_EN3__LOAD_COMP 0x0040 -#define INTR_EN3__PROGRAM_COMP 0x0080 -#define INTR_EN3__ERASE_COMP 0x0100 -#define INTR_EN3__PIPE_CPYBCK_CMD_COMP 0x0200 -#define INTR_EN3__LOCKED_BLK 0x0400 -#define INTR_EN3__UNSUP_CMD 0x0800 -#define INTR_EN3__INT_ACT 0x1000 -#define INTR_EN3__RST_COMP 0x2000 -#define INTR_EN3__PIPE_CMD_ERR 0x4000 -#define INTR_EN3__PAGE_XFER_INC 0x8000 - -#define PAGE_CNT3 0x520 -#define PAGE_CNT3__VALUE 0x00ff - -#define ERR_PAGE_ADDR3 0x530 -#define ERR_PAGE_ADDR3__VALUE 0xffff - -#define ERR_BLOCK_ADDR3 0x540 -#define ERR_BLOCK_ADDR3__VALUE 0xffff +#define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50)) +#define INTR_EN(__bank) (0x420 + ((__bank) * 0x50)) + +#define INTR_STATUS__ECC_TRANSACTION_DONE 0x0001 +#define INTR_STATUS__ECC_ERR 0x0002 +#define INTR_STATUS__DMA_CMD_COMP 0x0004 +#define INTR_STATUS__TIME_OUT 0x0008 +#define INTR_STATUS__PROGRAM_FAIL 0x0010 +#define INTR_STATUS__ERASE_FAIL 0x0020 +#define INTR_STATUS__LOAD_COMP 0x0040 +#define INTR_STATUS__PROGRAM_COMP 0x0080 +#define INTR_STATUS__ERASE_COMP 0x0100 +#define INTR_STATUS__PIPE_CPYBCK_CMD_COMP 0x0200 +#define INTR_STATUS__LOCKED_BLK 0x0400 +#define INTR_STATUS__UNSUP_CMD 0x0800 +#define INTR_STATUS__INT_ACT 0x1000 +#define INTR_STATUS__RST_COMP 0x2000 +#define INTR_STATUS__PIPE_CMD_ERR 0x4000 +#define INTR_STATUS__PAGE_XFER_INC 0x8000 + +#define INTR_EN__ECC_TRANSACTION_DONE 0x0001 +#define INTR_EN__ECC_ERR 0x0002 +#define INTR_EN__DMA_CMD_COMP 0x0004 +#define INTR_EN__TIME_OUT 0x0008 +#define INTR_EN__PROGRAM_FAIL 0x0010 +#define INTR_EN__ERASE_FAIL 0x0020 +#define INTR_EN__LOAD_COMP 0x0040 +#define INTR_EN__PROGRAM_COMP 0x0080 +#define INTR_EN__ERASE_COMP 0x0100 +#define INTR_EN__PIPE_CPYBCK_CMD_COMP 0x0200 +#define INTR_EN__LOCKED_BLK 0x0400 +#define INTR_EN__UNSUP_CMD 0x0800 +#define INTR_EN__INT_ACT 0x1000 +#define INTR_EN__RST_COMP 0x2000 +#define INTR_EN__PIPE_CMD_ERR 0x4000 +#define INTR_EN__PAGE_XFER_INC 0x8000 + +#define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50)) +#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50)) +#define ERR_BLOCK_ADDR(__bank) (0x450 + ((__bank) * 0x50)) #define DATA_INTR 0x550 #define DATA_INTR__WRITE_SPACE_AV 0x0001 @@ -484,141 +345,23 @@ #define PTN_INTR_EN__ACCESS_ERROR_BANK3 0x0010 #define PTN_INTR_EN__REG_ACCESS_ERROR 0x0020 -#define PERM_SRC_ID_0 0x830 -#define PERM_SRC_ID_0__SRCID 0x00ff -#define PERM_SRC_ID_0__DIRECT_ACCESS_ACTIVE 0x0800 -#define PERM_SRC_ID_0__WRITE_ACTIVE 0x2000 -#define PERM_SRC_ID_0__READ_ACTIVE 0x4000 -#define PERM_SRC_ID_0__PARTITION_VALID 0x8000 - -#define MIN_BLK_ADDR_0 0x840 -#define MIN_BLK_ADDR_0__VALUE 0xffff - -#define MAX_BLK_ADDR_0 0x850 -#define MAX_BLK_ADDR_0__VALUE 0xffff - -#define MIN_MAX_BANK_0 0x860 -#define MIN_MAX_BANK_0__MIN_VALUE 0x0003 -#define MIN_MAX_BANK_0__MAX_VALUE 0x000c - -#define PERM_SRC_ID_1 0x870 -#define PERM_SRC_ID_1__SRCID 0x00ff -#define PERM_SRC_ID_1__DIRECT_ACCESS_ACTIVE 0x0800 -#define PERM_SRC_ID_1__WRITE_ACTIVE 0x2000 -#define PERM_SRC_ID_1__READ_ACTIVE 0x4000 -#define PERM_SRC_ID_1__PARTITION_VALID 0x8000 - -#define MIN_BLK_ADDR_1 0x880 -#define MIN_BLK_ADDR_1__VALUE 0xffff - -#define MAX_BLK_ADDR_1 0x890 -#define MAX_BLK_ADDR_1__VALUE 0xffff - -#define MIN_MAX_BANK_1 0x8a0 -#define MIN_MAX_BANK_1__MIN_VALUE 0x0003 -#define MIN_MAX_BANK_1__MAX_VALUE 0x000c - -#define PERM_SRC_ID_2 0x8b0 -#define PERM_SRC_ID_2__SRCID 0x00ff -#define PERM_SRC_ID_2__DIRECT_ACCESS_ACTIVE 0x0800 -#define PERM_SRC_ID_2__WRITE_ACTIVE 0x2000 -#define PERM_SRC_ID_2__READ_ACTIVE 0x4000 -#define PERM_SRC_ID_2__PARTITION_VALID 0x8000 - -#define MIN_BLK_ADDR_2 0x8c0 -#define MIN_BLK_ADDR_2__VALUE 0xffff - -#define MAX_BLK_ADDR_2 0x8d0 -#define MAX_BLK_ADDR_2__VALUE 0xffff - -#define MIN_MAX_BANK_2 0x8e0 -#define MIN_MAX_BANK_2__MIN_VALUE 0x0003 -#define MIN_MAX_BANK_2__MAX_VALUE 0x000c - -#define PERM_SRC_ID_3 0x8f0 -#define PERM_SRC_ID_3__SRCID 0x00ff -#define PERM_SRC_ID_3__DIRECT_ACCESS_ACTIVE 0x0800 -#define PERM_SRC_ID_3__WRITE_ACTIVE 0x2000 -#define PERM_SRC_ID_3__READ_ACTIVE 0x4000 -#define PERM_SRC_ID_3__PARTITION_VALID 0x8000 - -#define MIN_BLK_ADDR_3 0x900 -#define MIN_BLK_ADDR_3__VALUE 0xffff - -#define MAX_BLK_ADDR_3 0x910 -#define MAX_BLK_ADDR_3__VALUE 0xffff - -#define MIN_MAX_BANK_3 0x920 -#define MIN_MAX_BANK_3__MIN_VALUE 0x0003 -#define MIN_MAX_BANK_3__MAX_VALUE 0x000c - -#define PERM_SRC_ID_4 0x930 -#define PERM_SRC_ID_4__SRCID 0x00ff -#define PERM_SRC_ID_4__DIRECT_ACCESS_ACTIVE 0x0800 -#define PERM_SRC_ID_4__WRITE_ACTIVE 0x2000 -#define PERM_SRC_ID_4__READ_ACTIVE 0x4000 -#define PERM_SRC_ID_4__PARTITION_VALID 0x8000 - -#define MIN_BLK_ADDR_4 0x940 -#define MIN_BLK_ADDR_4__VALUE 0xffff - -#define MAX_BLK_ADDR_4 0x950 -#define MAX_BLK_ADDR_4__VALUE 0xffff - -#define MIN_MAX_BANK_4 0x960 -#define MIN_MAX_BANK_4__MIN_VALUE 0x0003 -#define MIN_MAX_BANK_4__MAX_VALUE 0x000c - -#define PERM_SRC_ID_5 0x970 -#define PERM_SRC_ID_5__SRCID 0x00ff -#define PERM_SRC_ID_5__DIRECT_ACCESS_ACTIVE 0x0800 -#define PERM_SRC_ID_5__WRITE_ACTIVE 0x2000 -#define PERM_SRC_ID_5__READ_ACTIVE 0x4000 -#define PERM_SRC_ID_5__PARTITION_VALID 0x8000 - -#define MIN_BLK_ADDR_5 0x980 -#define MIN_BLK_ADDR_5__VALUE 0xffff - -#define MAX_BLK_ADDR_5 0x990 -#define MAX_BLK_ADDR_5__VALUE 0xffff - -#define MIN_MAX_BANK_5 0x9a0 -#define MIN_MAX_BANK_5__MIN_VALUE 0x0003 -#define MIN_MAX_BANK_5__MAX_VALUE 0x000c - -#define PERM_SRC_ID_6 0x9b0 -#define PERM_SRC_ID_6__SRCID 0x00ff -#define PERM_SRC_ID_6__DIRECT_ACCESS_ACTIVE 0x0800 -#define PERM_SRC_ID_6__WRITE_ACTIVE 0x2000 -#define PERM_SRC_ID_6__READ_ACTIVE 0x4000 -#define PERM_SRC_ID_6__PARTITION_VALID 0x8000 - -#define MIN_BLK_ADDR_6 0x9c0 -#define MIN_BLK_ADDR_6__VALUE 0xffff - -#define MAX_BLK_ADDR_6 0x9d0 -#define MAX_BLK_ADDR_6__VALUE 0xffff - -#define MIN_MAX_BANK_6 0x9e0 -#define MIN_MAX_BANK_6__MIN_VALUE 0x0003 -#define MIN_MAX_BANK_6__MAX_VALUE 0x000c - -#define PERM_SRC_ID_7 0x9f0 -#define PERM_SRC_ID_7__SRCID 0x00ff -#define PERM_SRC_ID_7__DIRECT_ACCESS_ACTIVE 0x0800 -#define PERM_SRC_ID_7__WRITE_ACTIVE 0x2000 -#define PERM_SRC_ID_7__READ_ACTIVE 0x4000 -#define PERM_SRC_ID_7__PARTITION_VALID 0x8000 - -#define MIN_BLK_ADDR_7 0xa00 -#define MIN_BLK_ADDR_7__VALUE 0xffff - -#define MAX_BLK_ADDR_7 0xa10 -#define MAX_BLK_ADDR_7__VALUE 0xffff - -#define MIN_MAX_BANK_7 0xa20 -#define MIN_MAX_BANK_7__MIN_VALUE 0x0003 -#define MIN_MAX_BANK_7__MAX_VALUE 0x000c +#define PERM_SRC_ID(__bank) (0x830 + ((__bank) * 0x40)) +#define PERM_SRC_ID__SRCID 0x00ff +#define PERM_SRC_ID__DIRECT_ACCESS_ACTIVE 0x0800 +#define PERM_SRC_ID__WRITE_ACTIVE 0x2000 +#define PERM_SRC_ID__READ_ACTIVE 0x4000 +#define PERM_SRC_ID__PARTITION_VALID 0x8000 + +#define MIN_BLK_ADDR(__bank) (0x840 + ((__bank) * 0x40)) +#define MIN_BLK_ADDR__VALUE 0xffff + +#define MAX_BLK_ADDR(__bank) (0x850 + ((__bank) * 0x40)) +#define MAX_BLK_ADDR__VALUE 0xffff + +#define MIN_MAX_BANK(__bank) (0x860 + ((__bank) * 0x40)) +#define MIN_MAX_BANK__MIN_VALUE 0x0003 +#define MIN_MAX_BANK__MAX_VALUE 0x000c + /* ffsdefs.h */ #define CLEAR 0 /*use this to clear a field instead of "fail"*/ -- cgit v1.2.3 From c89eeda810f0ec4f0eee0206ebb79e476df9f83e Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Fri, 6 May 2011 15:28:57 +0100 Subject: mtd: denali: detect the number of banks Not all configurations of the Denali controller support 4 banks. The controller can support between 1 and 16 banks. Detect this from the design features register. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/denali.c | 28 ++++++++++++++++++++-------- drivers/mtd/nand/denali.h | 2 +- 2 files changed, 21 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 5568640cb3ba..8c5dc89da2d2 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -178,11 +178,11 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) dev_dbg(denali->dev, "%s, Line %d, Function: %s\n", __FILE__, __LINE__, __func__); - for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) + for (i = 0 ; i < denali->max_banks; i++) iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, denali->flash_reg + INTR_STATUS(i)); - for (i = 0 ; i < LLD_MAX_FLASH_BANKS; i++) { + for (i = 0 ; i < denali->max_banks; i++) { iowrite32(1 << i, denali->flash_reg + DEVICE_RESET); while (!(ioread32(denali->flash_reg + INTR_STATUS(i)) & @@ -194,7 +194,7 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali) "NAND Reset operation timed out on bank %d\n", i); } - for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) + for (i = 0; i < denali->max_banks; i++) iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, denali->flash_reg + INTR_STATUS(i)); @@ -405,11 +405,11 @@ static void get_hynix_nand_para(struct denali_nand_info *denali, */ static void find_valid_banks(struct denali_nand_info *denali) { - uint32_t id[LLD_MAX_FLASH_BANKS]; + uint32_t id[denali->max_banks]; int i; denali->total_used_banks = 1; - for (i = 0; i < LLD_MAX_FLASH_BANKS; i++) { + for (i = 0; i < denali->max_banks; i++) { index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90); index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0); index_addr_read_data(denali, @@ -445,6 +445,17 @@ static void find_valid_banks(struct denali_nand_info *denali) "denali->total_used_banks: %d\n", denali->total_used_banks); } +/* + * Use the configuration feature register to determine the maximum number of + * banks that the hardware supports. + */ +static void detect_max_banks(struct denali_nand_info *denali) +{ + uint32_t features = ioread32(denali->flash_reg + FEATURES); + + denali->max_banks = 2 << (features & FEATURES__N_BANKS); +} + static void detect_partition_feature(struct denali_nand_info *denali) { /* For MRST platform, denali->fwblks represent the @@ -562,7 +573,7 @@ static void denali_irq_init(struct denali_nand_info *denali) int_mask = DENALI_IRQ_ALL; /* Clear all status bits */ - for (i = 0; i < LLD_MAX_FLASH_BANKS; ++i) + for (i = 0; i < denali->max_banks; ++i) iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS(i)); denali_irq_enable(denali, int_mask); @@ -579,7 +590,7 @@ static void denali_irq_enable(struct denali_nand_info *denali, { int i; - for (i = 0; i < LLD_MAX_FLASH_BANKS; ++i) + for (i = 0; i < denali->max_banks; ++i) iowrite32(int_mask, denali->flash_reg + INTR_EN(i)); } @@ -1345,6 +1356,7 @@ static void denali_hw_init(struct denali_nand_info *denali) /* Should set value for these registers when init */ iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES); iowrite32(1, denali->flash_reg + ECC_ENABLE); + detect_max_banks(denali); denali_nand_timing_set(denali); denali_irq_init(denali); } @@ -1522,7 +1534,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) /* scan for NAND devices attached to the controller * this is the first stage in a two step process to register * with the nand subsystem */ - if (nand_scan_ident(&denali->mtd, LLD_MAX_FLASH_BANKS, NULL)) { + if (nand_scan_ident(&denali->mtd, denali->max_banks, NULL)) { ret = -ENXIO; goto failed_req_irq; } diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 638668c4b41f..fabb9d56b39e 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -454,7 +454,6 @@ #define READ_WRITE_ENABLE_HIGH_COUNT 22 #define ECC_SECTOR_SIZE 512 -#define LLD_MAX_FLASH_BANKS 4 #define DENALI_BUF_SIZE (NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) @@ -494,6 +493,7 @@ struct denali_nand_info { uint32_t totalblks; uint32_t blksperchip; uint32_t bbtskipbytes; + uint32_t max_banks; }; #endif /*_LLD_NAND_*/ -- cgit v1.2.3 From 16004f3685541c57a280bae3fde6562256fd0ba5 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Sun, 8 May 2011 10:47:59 -0700 Subject: mtd: m25p80: Add Numonyx m25px32 family Signed-off-by: Kevin Cernekee Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 1c170019b886..15231d6d7012 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -730,7 +730,10 @@ static const struct spi_device_id m25p_ids[] = { { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) }, { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) }, - { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) }, + { "m25px32", INFO(0x207116, 0, 64 * 1024, 64, SECT_4K) }, + { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64, SECT_4K) }, + { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64, SECT_4K) }, + { "m25px64", INFO(0x207117, 0, 64 * 1024, 128, 0) }, /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ { "w25x10", INFO(0xef3011, 0, 64 * 1024, 2, SECT_4K) }, -- cgit v1.2.3 From aa0846534b9c7238187b4276e83efb9969d4c6e3 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Sun, 8 May 2011 10:48:00 -0700 Subject: mtd: m25p80: Clean up JEDEC manufacturer checks Use the manufacturer ID names from cfi.h instead of hard-coding hex constants. Introduce a JEDEC_MFR macro for clarity. Signed-off-by: Kevin Cernekee Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 15231d6d7012..16adfaa78018 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -27,6 +27,7 @@ #include #include +#include #include #include @@ -76,6 +77,8 @@ #define FAST_READ_DUMMY_BYTE 0 #endif +#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16) + /****************************************************************************/ struct m25p { @@ -872,9 +875,9 @@ static int __devinit m25p_probe(struct spi_device *spi) * up with the software protection bits set */ - if (info->jedec_id >> 16 == 0x1f || - info->jedec_id >> 16 == 0x89 || - info->jedec_id >> 16 == 0xbf) { + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_ATMEL || + JEDEC_MFR(info->jedec_id) == CFI_MFR_INTEL || + JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) { write_enable(flash); write_sr(flash, 0); } @@ -892,7 +895,7 @@ static int __devinit m25p_probe(struct spi_device *spi) flash->mtd.read = m25p80_read; /* sst flash chips use AAI word program */ - if (info->jedec_id >> 16 == 0xbf) + if (JEDEC_MFR(info->jedec_id) == CFI_MFR_SST) flash->mtd.write = sst_write; else flash->mtd.write = m25p80_write; -- cgit v1.2.3 From baa9ae3cfdf8ca2cb019c02c0a9e16f63cdd0260 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Sun, 8 May 2011 10:48:01 -0700 Subject: mtd: m25p80: Add Spansion S25FL256S These are 32MiB parts which use a slightly different 4-byte enable sequence from Macronix. Default to the Spansion 4-byte scheme in set_4byte(), as it is more likely to be copied by other vendors. Signed-off-by: Kevin Cernekee Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 22 +++++++++++++++++----- 1 file changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 16adfaa78018..e050cc8b3ee7 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -56,6 +56,9 @@ #define OPCODE_EN4B 0xb7 /* Enter 4-byte mode */ #define OPCODE_EX4B 0xe9 /* Exit 4-byte mode */ +/* Used for Spansion flashes only. */ +#define OPCODE_BRWR 0x17 /* Bank register write */ + /* Status Register bits. */ #define SR_WIP 1 /* Write in progress */ #define SR_WEL 2 /* Write enable latch */ @@ -161,11 +164,18 @@ static inline int write_disable(struct m25p *flash) /* * Enable/disable 4-byte addressing mode. */ -static inline int set_4byte(struct m25p *flash, int enable) +static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) { - u8 code = enable ? OPCODE_EN4B : OPCODE_EX4B; - - return spi_write_then_read(flash->spi, &code, 1, NULL, 0); + switch (JEDEC_MFR(jedec_id)) { + case CFI_MFR_MACRONIX: + flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B; + return spi_write(flash->spi, flash->command, 1); + default: + /* Spansion style */ + flash->command[0] = OPCODE_BRWR; + flash->command[1] = enable << 7; + return spi_write(flash->spi, flash->command, 2); + } } /* @@ -688,6 +698,8 @@ static const struct spi_device_id m25p_ids[] = { { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) }, { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SECT_4K) }, { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, + { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, + { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, 0) }, { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, @@ -921,7 +933,7 @@ static int __devinit m25p_probe(struct spi_device *spi) /* enable 4-byte addressing if the device exceeds 16MiB */ if (flash->mtd.size > 0x1000000) { flash->addr_width = 4; - set_4byte(flash, 1); + set_4byte(flash, info->jedec_id, 1); } else flash->addr_width = 3; } -- cgit v1.2.3 From 3d2d2b657f61cccc4b339b031b106c911ea942a0 Mon Sep 17 00:00:00 2001 From: Kevin Cernekee Date: Sun, 8 May 2011 10:48:02 -0700 Subject: mtd: m25p80: Add Spansion S25FL512S, S70FL01GS S25FL512S = 64MiB single die, same family as S25FL256S S70FL01GS = 2x S25FL512S dies in one package (separate chip selects) These devices are not sampling yet, but they are expected to be very similar to S25FL256S, which has been tested. Signed-off-by: Kevin Cernekee Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index e050cc8b3ee7..2b0d0542d9df 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -700,6 +700,8 @@ static const struct spi_device_id m25p_ids[] = { { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, 0) }, + { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, 0) }, + { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, -- cgit v1.2.3 From 61cc8276fa776ced06b0e5b67b57e12c4997d388 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 9 May 2011 10:07:58 -0400 Subject: mtd: sst25l: fix section markings The previous section mismatch fix for this driver wasn't entirely correct. The sst25l_flash_info array is now used in the devinit probe func, but is marked as initdata, so building results in the warning: WARNING: drivers/mtd/devices/sst25l.o(.devinit.text): Section mismatch in reference from the function sst25l_probe() to the variable .init.data:sst25l_flash_info Further, the remove func should be devexit rather than exit to match the probe func. Signed-off-by: Mike Frysinger Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/sst25l.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index c163e619abc9..ac1d2442e101 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -66,7 +66,7 @@ struct flash_info { #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd) -static struct flash_info __initdata sst25l_flash_info[] = { +static struct flash_info __devinitdata sst25l_flash_info[] = { {"sst25lf020a", 0xbf43, 256, 1024, 4096}, {"sst25lf040a", 0xbf44, 256, 2048, 4096}, }; @@ -469,7 +469,7 @@ static int __devinit sst25l_probe(struct spi_device *spi) return 0; } -static int __exit sst25l_remove(struct spi_device *spi) +static int __devexit sst25l_remove(struct spi_device *spi) { struct sst25l_flash *flash = dev_get_drvdata(&spi->dev); int ret; @@ -490,7 +490,7 @@ static struct spi_driver sst25l_driver = { .owner = THIS_MODULE, }, .probe = sst25l_probe, - .remove = __exit_p(sst25l_remove), + .remove = __devexit_p(sst25l_remove), }; static int __init sst25l_init(void) -- cgit v1.2.3 From c5d8c0cae4af7d78823d32fcd1c458ee1a1b5489 Mon Sep 17 00:00:00 2001 From: Kishore Kadiyala Date: Wed, 11 May 2011 21:17:27 +0530 Subject: mtd: omap: fix subpage ecc issue with prefetch When reading/writing a subpage (When HW ECC is not available/enabled) for number of bytes not aligned to 4, the mis-aligned bytes are handled first (by cpu copy method) before enabling the Prefetch engine to/from 'p'(start of buffer 'buf'). Then it reads/writes rest of the bytes with the help of Prefetch engine, if available, or again using cpu copy method. Currently, reading/writing of rest of bytes, is not done correctly since its trying to read/write again to/from begining of buffer 'buf', overwriting the mis-aligned bytes. Read & write using prefetch engine got broken in commit '2c01946c'. We never hit a scenario of not getting 'gpmc_prefetch_enable' call success. So, problem did not get caught up. Signed-off-by: Kishore Kadiyala Signed-off-by: Vimal Singh Reported-by: Bryan DE FARIA Cc: stable@kernel.org [2.6.35+] Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/omap2.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 288423f7b7b1..39f46a0cf34e 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -263,11 +263,10 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len) if (ret) { /* PFPW engine is busy, use cpu copy method */ if (info->nand.options & NAND_BUSWIDTH_16) - omap_read_buf16(mtd, buf, len); + omap_read_buf16(mtd, (u_char *)p, len); else - omap_read_buf8(mtd, buf, len); + omap_read_buf8(mtd, (u_char *)p, len); } else { - p = (u32 *) buf; do { r_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT); r_count = r_count >> 2; @@ -293,7 +292,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd, struct omap_nand_info, mtd); uint32_t w_count = 0; int i = 0, ret = 0; - u16 *p; + u16 *p = (u16 *)buf; unsigned long tim, limit; /* take care of subpage writes */ @@ -309,11 +308,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd, if (ret) { /* PFPW engine is busy, use cpu copy method */ if (info->nand.options & NAND_BUSWIDTH_16) - omap_write_buf16(mtd, buf, len); + omap_write_buf16(mtd, (u_char *)p, len); else - omap_write_buf8(mtd, buf, len); + omap_write_buf8(mtd, (u_char *)p, len); } else { - p = (u16 *) buf; while (len) { w_count = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT); w_count = w_count >> 1; -- cgit v1.2.3 From 447d9bd82020f159456ee00b011486205205aaa7 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 13 May 2011 23:34:19 +0300 Subject: mtd: convert to seq_file interface ->read_proc interface is going away, switch to seq_file. Signed-off-by: Alexey Dobriyan Acked-by: Mike Frysinger Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 50 +++++++++++++++++++------------------------------- 1 file changed, 19 insertions(+), 31 deletions(-) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index a50348b60d79..d162426416de 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -705,44 +706,32 @@ EXPORT_SYMBOL_GPL(mtd_kmalloc_up_to); static struct proc_dir_entry *proc_mtd; -static inline int mtd_proc_info(char *buf, struct mtd_info *this) -{ - return sprintf(buf, "mtd%d: %8.8llx %8.8x \"%s\"\n", this->index, - (unsigned long long)this->size, - this->erasesize, this->name); -} - -static int mtd_read_proc (char *page, char **start, off_t off, int count, - int *eof, void *data_unused) +static int mtd_proc_show(struct seq_file *m, void *v) { struct mtd_info *mtd; - int len, l; - off_t begin = 0; + seq_puts(m, "dev: size erasesize name\n"); mutex_lock(&mtd_table_mutex); - - len = sprintf(page, "dev: size erasesize name\n"); mtd_for_each_device(mtd) { - l = mtd_proc_info(page + len, mtd); - len += l; - if (len+begin > off+count) - goto done; - if (len+begin < off) { - begin += len; - len = 0; - } + seq_printf(m, "mtd%d: %8.8llx %8.8x \"%s\"\n", + mtd->index, (unsigned long long)mtd->size, + mtd->erasesize, mtd->name); } - - *eof = 1; - -done: mutex_unlock(&mtd_table_mutex); - if (off >= len+begin) - return 0; - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); + return 0; } +static int mtd_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, mtd_proc_show, NULL); +} + +static const struct file_operations mtd_proc_ops = { + .open = mtd_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; #endif /* CONFIG_PROC_FS */ /*====================================================================*/ @@ -783,8 +772,7 @@ static int __init init_mtd(void) goto err_bdi3; #ifdef CONFIG_PROC_FS - if ((proc_mtd = create_proc_entry( "mtd", 0, NULL ))) - proc_mtd->read_proc = mtd_read_proc; + proc_mtd = proc_create("mtd", 0, NULL, &mtd_proc_ops); #endif /* CONFIG_PROC_FS */ return 0; -- cgit v1.2.3 From 7c802fbd541448accec7bbc0e72ef38693a29593 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 17 May 2011 11:13:17 +0300 Subject: mtd: be silent when mtd partition parser cannot be found Currently when we register partitions in 'parse_mtd_partitions()' we accept the list of parsers we should try. And if one of the parsers was not found we print a message. Well, first of all this whole idea is bad - look at how many 'part_probes' and 'part_probe_types' variables we have - nearly every driver defines one. Instead, we should just go through all registered parsers all the time. But this needs to be worked on separately. This patch makes life of MTD partitions' users a bit simpler and allows them to safely request parsers which have not been registered - 'parse_mtd_partitions()' will not print a "not available" message in this case. The point is that drivers do not have to do things like this any longer: static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "afs", NULL }; but can simply do like this: static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "afs", NULL }; Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdpart.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 0a4760174782..cd631e773a7b 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -722,11 +722,8 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types, parser = get_partition_parser(*types); if (!parser && !request_module("%s", *types)) parser = get_partition_parser(*types); - if (!parser) { - printk(KERN_NOTICE "%s partition parsing not available\n", - *types); + if (!parser) continue; - } ret = (*parser->parse_fn)(master, pparts, origin); if (ret > 0) { printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n", -- cgit v1.2.3 From 52534f2dba5d033c0c33e515faa2767d7e8e986a Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Tue, 17 May 2011 22:36:18 +0800 Subject: mtd: simplify get_mtd_device_nm function 'get_mtd_device_nm()' has a piece of code which equivalent to what '__get_mtd_device()' does - remove this duplicated code and use ''__get_mtd_device()' instead. Artem: changed commit message. Artem: while on it, remove an unnecessary extra empty line Signed-off-by: Wanlong Gao Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index d162426416de..8e1909115924 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -533,7 +533,6 @@ int __get_mtd_device(struct mtd_info *mtd) return -ENODEV; if (mtd->get_device) { - err = mtd->get_device(mtd); if (err) { @@ -571,21 +570,13 @@ struct mtd_info *get_mtd_device_nm(const char *name) if (!mtd) goto out_unlock; - if (!try_module_get(mtd->owner)) + err = __get_mtd_device(mtd); + if (err) goto out_unlock; - if (mtd->get_device) { - err = mtd->get_device(mtd); - if (err) - goto out_put; - } - - mtd->usecount++; mutex_unlock(&mtd_table_mutex); return mtd; -out_put: - module_put(mtd->owner); out_unlock: mutex_unlock(&mtd_table_mutex); return ERR_PTR(err); -- cgit v1.2.3 From 100f2341e305f98de3aa12fb472771ab029cbda7 Mon Sep 17 00:00:00 2001 From: Tadashi Abe Date: Thu, 19 May 2011 15:58:15 +0900 Subject: mtd: fix hang-up in cfi erase and read contention cfi erase command hangs up when erase and read contention occurs. If read runs at the same address as erase operation, read issues Erase-Suspend via get_chip() and the erase goes into sleep in wait queue. But in this case, read operation exits by time-out without waking it up. I think the other variants (0001, 0020 and lpddr) have the same problem too. Tested and verified the patch only on CFI-0002 flash, though. Signed-off-by: Tadashi Abe Acked-by: Joakim Tjernlund Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0001.c | 9 +++------ drivers/mtd/chips/cfi_cmdset_0002.c | 4 +--- drivers/mtd/chips/cfi_cmdset_0020.c | 1 + drivers/mtd/lpddr/lpddr_cmds.c | 7 +------ 4 files changed, 6 insertions(+), 15 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 09cb7c8d93b4..121be022d1ea 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -812,12 +812,9 @@ static int chip_ready (struct map_info *map, struct flchip *chip, unsigned long break; if (time_after(jiffies, timeo)) { - /* Urgh. Resume and pretend we weren't here. */ - map_write(map, CMD(0xd0), adr); - /* Make sure we're in 'read status' mode if it had finished */ - map_write(map, CMD(0x70), adr); - chip->state = FL_ERASING; - chip->oldstate = FL_READY; + /* Urgh. Resume and pretend we weren't here. + * Make sure we're in 'read status' mode if it had finished */ + put_chip(map, chip, adr); printk(KERN_ERR "%s: Chip not ready after erase " "suspended: status = 0x%lx\n", map->name, status.x[0]); return -EIO; diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index b890f6c964d9..9a99a5bd3ea5 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -711,9 +711,7 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr * there was an error (so leave the erase * routine to recover from it) or we trying to * use the erase-in-progress sector. */ - map_write(map, cfi->sector_erase_cmd, chip->in_progress_block_addr); - chip->state = FL_ERASING; - chip->oldstate = FL_READY; + put_chip(map, chip, adr); printk(KERN_ERR "MTD %s(): chip not ready after erase suspend\n", __func__); return -EIO; } diff --git a/drivers/mtd/chips/cfi_cmdset_0020.c b/drivers/mtd/chips/cfi_cmdset_0020.c index ed56ad3884fb..179814a95f3a 100644 --- a/drivers/mtd/chips/cfi_cmdset_0020.c +++ b/drivers/mtd/chips/cfi_cmdset_0020.c @@ -296,6 +296,7 @@ static inline int do_read_onechip(struct map_info *map, struct flchip *chip, lof /* make sure we're in 'read status' mode */ map_write(map, CMD(0x70), cmd_addr); chip->state = FL_ERASING; + wake_up(&chip->wq); mutex_unlock(&chip->mutex); printk(KERN_ERR "Chip not ready after erase " "suspended: status = 0x%lx\n", status.x[0]); diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index 12679925b420..16dcd1c76baf 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -313,12 +313,7 @@ static int chip_ready(struct map_info *map, struct flchip *chip, int mode) if (ret) { /* Oops. something got wrong. */ /* Resume and pretend we weren't here. */ - map_write(map, CMD(LPDDR_RESUME), - map->pfow_base + PFOW_COMMAND_CODE); - map_write(map, CMD(LPDDR_START_EXECUTION), - map->pfow_base + PFOW_COMMAND_EXECUTE); - chip->state = FL_ERASING; - chip->oldstate = FL_READY; + put_chip(map, chip); printk(KERN_ERR "%s: suspend operation failed." "State may be wrong \n", map->name); return -EIO; -- cgit v1.2.3 From 5c8d2607756a63ddf5b2f2dd368851b8febe4e72 Mon Sep 17 00:00:00 2001 From: Tadashi Abe Date: Thu, 19 May 2011 16:17:50 +0900 Subject: mtd: remove duplicate assignment of chip->state This is a trivial patch which removes unnecessary assignment of chip->state in put_chip(). It's duplicated. Signed-off-by: Tadashi Abe Acked-by: Joakim Tjernlund Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0001.c | 1 - drivers/mtd/chips/cfi_cmdset_0002.c | 1 - drivers/mtd/lpddr/lpddr_cmds.c | 1 - 3 files changed, 3 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index 121be022d1ea..e1e122f2f929 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -994,7 +994,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad switch(chip->oldstate) { case FL_ERASING: - chip->state = chip->oldstate; /* What if one interleaved chip has finished and the other hasn't? The old code would leave the finished one in READY mode. That's bad, and caused -EROFS diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 9a99a5bd3ea5..23175edd5634 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -761,7 +761,6 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad switch(chip->oldstate) { case FL_ERASING: - chip->state = chip->oldstate; map_write(map, cfi->sector_erase_cmd, chip->in_progress_block_addr); chip->oldstate = FL_READY; chip->state = FL_ERASING; diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c index 16dcd1c76baf..65655dd59e1f 100644 --- a/drivers/mtd/lpddr/lpddr_cmds.c +++ b/drivers/mtd/lpddr/lpddr_cmds.c @@ -378,7 +378,6 @@ static void put_chip(struct map_info *map, struct flchip *chip) switch (chip->oldstate) { case FL_ERASING: - chip->state = chip->oldstate; map_write(map, CMD(LPDDR_RESUME), map->pfow_base + PFOW_COMMAND_CODE); map_write(map, CMD(LPDDR_START_EXECUTION), -- cgit v1.2.3 From 8d8f26e19cae48541b824f164021e1ff05067f8c Mon Sep 17 00:00:00 2001 From: "Maxin B. John" Date: Fri, 20 May 2011 15:44:10 +0100 Subject: mtd: mtdswap: fix possible null dereference This patch fixes the possible null dereference of the variable "oinfo" Thanks to Coverity for spotting this. Signed-off-by: Maxin B. John Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdswap.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/mtdswap.c b/drivers/mtd/mtdswap.c index fed215c4cfa1..fd7885327611 100644 --- a/drivers/mtd/mtdswap.c +++ b/drivers/mtd/mtdswap.c @@ -1450,7 +1450,13 @@ static void mtdswap_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) } oinfo = mtd->ecclayout; - if (!mtd->oobsize || !oinfo || oinfo->oobavail < MTDSWAP_OOBSIZE) { + if (!oinfo) { + printk(KERN_ERR "%s: mtd%d does not have OOB\n", + MTDSWAP_PREFIX, mtd->index); + return; + } + + if (!mtd->oobsize || oinfo->oobavail < MTDSWAP_OOBSIZE) { printk(KERN_ERR "%s: Not enough free bytes in OOB, " "%d available, %zu needed.\n", MTDSWAP_PREFIX, oinfo->oobavail, MTDSWAP_OOBSIZE); -- cgit v1.2.3 From d5ca51292d899a19882cb9bf8f64079209e688fe Mon Sep 17 00:00:00 2001 From: Wanlong Gao Date: Fri, 20 May 2011 21:14:30 +0800 Subject: mtd:fix the bad format in the mtdcore.c Remove the spare spaces in the head of the lines. Signed-off-by: Wanlong Gao Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 8e1909115924..f3c94006ffe6 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -444,7 +444,7 @@ void register_mtd_user (struct mtd_notifier *new) list_add(&new->list, &mtd_notifiers); - __module_get(THIS_MODULE); + __module_get(THIS_MODULE); mtd_for_each_device(mtd) new->add(mtd); @@ -707,9 +707,9 @@ static int mtd_proc_show(struct seq_file *m, void *v) seq_printf(m, "mtd%d: %8.8llx %8.8x \"%s\"\n", mtd->index, (unsigned long long)mtd->size, mtd->erasesize, mtd->name); - } + } mutex_unlock(&mtd_table_mutex); - return 0; + return 0; } static int mtd_proc_open(struct inode *inode, struct file *file) @@ -781,7 +781,7 @@ err_reg: static void __exit cleanup_mtd(void) { #ifdef CONFIG_PROC_FS - if (proc_mtd) + if (proc_mtd) remove_proc_entry( "mtd", NULL); #endif /* CONFIG_PROC_FS */ class_unregister(&mtd_class); -- cgit v1.2.3 From 5fcb033159bc4f66782f13fa1e7f981f41a951ef Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:42 +0100 Subject: mtd: always build partitioning support There are very few situations where MTD partitioning is not required, and the benefit in code size reduction by making this configurable does not warrant the level of ifdeffery needed. Artem: this patch is not final - we just make sure that mtd partitions are always compiled in, and at the end of the series we'll kill MTD_PARTITIONS altogether. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/Kconfig | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index b4567c35a322..8b61b0cc7b45 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -1,6 +1,7 @@ menuconfig MTD tristate "Memory Technology Device (MTD) support" depends on HAS_IOMEM + select MTD_PARTITIONS help Memory Technology Devices are flash, RAM and similar chips, often used for solid state file systems on embedded devices. This option @@ -34,16 +35,7 @@ config MTD_TESTS various checks and verifications when loaded. config MTD_PARTITIONS - bool "MTD partitioning support" - help - If you have a device which needs to divide its flash chip(s) up - into multiple 'partitions', each of which appears to the user as - a separate MTD device, you require this option to be enabled. If - unsure, say 'Y'. - - Note, however, that you don't need this option for the DiskOnChip - devices. Partitioning on NFTL 'devices' is a different - that's the - 'normal' form of partitioning used on a block device. + bool if MTD_PARTITIONS -- cgit v1.2.3 From f5671ab3f67a10f7234de21464391c20c1ef8ebb Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 17:15:46 +0100 Subject: mtd: introduce mtd_device_(un)register() To prepare for the removal of add_mtd_device and add_mtd_partitions(), introduce mtd_device_register(). This will create partitions if they are supplied or register the whole device if there are no partitions. Once all drivers are converted to use mtd_device_register(), add_mtd_device() and add_mtd_partitions() will be made internal only. v2: move kerneldoc to implementation file and fixup some kerneldoc warnings. Artem: tweak comments: remove junk tabs, use dots consistently. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 45 ++++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/mtd.h | 6 ++++++ include/linux/mtd/partitions.h | 2 +- 3 files changed, 52 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index f3c94006ffe6..9af103bf9218 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -38,6 +38,7 @@ #include #include +#include #include "mtdcore.h" /* @@ -427,6 +428,50 @@ out_error: return ret; } +/** + * mtd_device_register - register an MTD device. + * + * @master: the MTD device to register + * @parts: the partitions to register - only valid if nr_parts > 0 + * @nr_parts: the number of partitions in parts. If zero then the full MTD + * device is registered + * + * Register an MTD device with the system and optionally, a number of + * partitions. If nr_parts is 0 then the whole device is registered, otherwise + * only the partitions are registered. To register both the full device *and* + * the partitions, call mtd_device_register() twice, once with nr_parts == 0 + * and once equal to the number of partitions. + */ +int mtd_device_register(struct mtd_info *master, + const struct mtd_partition *parts, + int nr_parts) +{ + return parts ? add_mtd_partitions(master, parts, nr_parts) : + add_mtd_device(master); +} +EXPORT_SYMBOL_GPL(mtd_device_register); + +/** + * mtd_device_unregister - unregister an existing MTD device. + * + * @master: the MTD device to unregister. This will unregister both the master + * and any partitions if registered. + */ +int mtd_device_unregister(struct mtd_info *master) +{ + int err; + + err = del_mtd_partitions(master); + if (err) + return err; + + if (!device_is_registered(&master->dev)) + return 0; + + return del_mtd_device(master); +} +EXPORT_SYMBOL_GPL(mtd_device_unregister); + /** * register_mtd_user - register a 'user' of MTD devices. * @new: pointer to notifier info structure diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 06b489a7605b..f4b0b27a7bbe 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -325,6 +325,12 @@ static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd) extern int add_mtd_device(struct mtd_info *mtd); extern int del_mtd_device (struct mtd_info *mtd); +struct mtd_partition; + +extern int mtd_device_register(struct mtd_info *master, + const struct mtd_partition *parts, + int nr_parts); +extern int mtd_device_unregister(struct mtd_info *master); extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); extern int __get_mtd_device(struct mtd_info *mtd); extern void __put_mtd_device(struct mtd_info *mtd); diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index 4a0a8ba90a72..998a6cf35167 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -16,7 +16,7 @@ * Partition definition structure: * * An array of struct partition is passed along with a MTD object to - * add_mtd_partitions() to create them. + * mtd_device_register() to create them. * * For each partition, these fields are available: * name: string that will be used to label the partition's MTD device. -- cgit v1.2.3 From 11b73c8b10e58ae90c12e51be5531007e86a9c66 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:44 +0100 Subject: mtd: provide of_mtd_parse_partitions for !CONFIG_MTD_OF_PARTS If we don't have OpenFirmware enabled then provide a stub of_mtd_parse_partitions that returns no partitions so drivers don't need ifdeffery inside. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- include/linux/mtd/partitions.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index 998a6cf35167..afe32db14a87 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -73,9 +73,18 @@ extern int parse_mtd_partitions(struct mtd_info *master, const char **types, struct device; struct device_node; +#ifdef CONFIG_MTD_OF_PARTS int __devinit of_mtd_parse_partitions(struct device *dev, struct device_node *node, struct mtd_partition **pparts); +#else +static inline int of_mtd_parse_partitions(struct device *dev, + struct device_node *node, + struct mtd_partition **pparts) +{ + return 0; +} +#endif #ifdef CONFIG_MTD_PARTITIONS static inline int mtd_has_partitions(void) { return 1; } -- cgit v1.2.3 From 984e6d8ec5abe0487e4c3c22d233cd6ba8695cda Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:45 +0100 Subject: mtd: physmap: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/physmap.c | 34 +++++++++------------------------- drivers/mtd/maps/physmap_of.c | 30 ++++-------------------------- include/linux/mtd/physmap.h | 4 ---- 3 files changed, 13 insertions(+), 55 deletions(-) diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 7522df4f71f1..d2059261ca8b 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -27,10 +27,8 @@ struct physmap_flash_info { struct mtd_info *mtd[MAX_RESOURCES]; struct mtd_info *cmtd; struct map_info map[MAX_RESOURCES]; -#ifdef CONFIG_MTD_PARTITIONS int nr_parts; struct mtd_partition *parts; -#endif }; static int physmap_flash_remove(struct platform_device *dev) @@ -47,18 +45,9 @@ static int physmap_flash_remove(struct platform_device *dev) physmap_data = dev->dev.platform_data; if (info->cmtd) { -#ifdef CONFIG_MTD_PARTITIONS - if (info->nr_parts || physmap_data->nr_parts) { - del_mtd_partitions(info->cmtd); - - if (info->nr_parts) - kfree(info->parts); - } else { - del_mtd_device(info->cmtd); - } -#else - del_mtd_device(info->cmtd); -#endif + mtd_device_unregister(info->cmtd); + if (info->nr_parts) + kfree(info->parts); if (info->cmtd != info->mtd[0]) mtd_concat_destroy(info->cmtd); } @@ -76,9 +65,7 @@ static const char *rom_probe_types[] = { "qinfo_probe", "map_rom", NULL }; -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -#endif static int physmap_flash_probe(struct platform_device *dev) { @@ -164,24 +151,23 @@ static int physmap_flash_probe(struct platform_device *dev) if (err) goto err_out; -#ifdef CONFIG_MTD_PARTITIONS err = parse_mtd_partitions(info->cmtd, part_probe_types, - &info->parts, 0); + &info->parts, 0); if (err > 0) { - add_mtd_partitions(info->cmtd, info->parts, err); + mtd_device_register(info->cmtd, info->parts, err); info->nr_parts = err; return 0; } if (physmap_data->nr_parts) { printk(KERN_NOTICE "Using physmap partition information\n"); - add_mtd_partitions(info->cmtd, physmap_data->parts, - physmap_data->nr_parts); + mtd_device_register(info->cmtd, physmap_data->parts, + physmap_data->nr_parts); return 0; } -#endif - add_mtd_device(info->cmtd); + mtd_device_register(info->cmtd, NULL, 0); + return 0; err_out: @@ -245,14 +231,12 @@ void physmap_configure(unsigned long addr, unsigned long size, physmap_flash_data.set_vpp = set_vpp; } -#ifdef CONFIG_MTD_PARTITIONS void physmap_set_partitions(struct mtd_partition *parts, int num_parts) { physmap_flash_data.nr_parts = num_parts; physmap_flash_data.parts = parts; } #endif -#endif static int __init physmap_init(void) { diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index c1d33464aee8..d251d1db129b 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -34,16 +34,12 @@ struct of_flash_list { struct of_flash { struct mtd_info *cmtd; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts; -#endif int list_size; /* number of elements in of_flash_list */ struct of_flash_list list[0]; }; -#ifdef CONFIG_MTD_PARTITIONS #define OF_FLASH_PARTS(info) ((info)->parts) - static int parse_obsolete_partitions(struct platform_device *dev, struct of_flash *info, struct device_node *dp) @@ -89,10 +85,6 @@ static int parse_obsolete_partitions(struct platform_device *dev, return nr_parts; } -#else /* MTD_PARTITIONS */ -#define OF_FLASH_PARTS(info) (0) -#define parse_partitions(info, dev) (0) -#endif /* MTD_PARTITIONS */ static int of_flash_remove(struct platform_device *dev) { @@ -105,17 +97,14 @@ static int of_flash_remove(struct platform_device *dev) dev_set_drvdata(&dev->dev, NULL); if (info->cmtd != info->list[0].mtd) { - del_mtd_device(info->cmtd); + mtd_device_unregister(info->cmtd); mtd_concat_destroy(info->cmtd); } if (info->cmtd) { - if (OF_FLASH_PARTS(info)) { - del_mtd_partitions(info->cmtd); + if (OF_FLASH_PARTS(info)) kfree(OF_FLASH_PARTS(info)); - } else { - del_mtd_device(info->cmtd); - } + mtd_device_unregister(info->cmtd); } for (i = 0; i < info->list_size; i++) { @@ -172,7 +161,6 @@ static struct mtd_info * __devinit obsolete_probe(struct platform_device *dev, } } -#ifdef CONFIG_MTD_PARTITIONS /* When partitions are set we look for a linux,part-probe property which specifies the list of partition probers to use. If none is given then the default is use. These take precedence over other device tree @@ -212,14 +200,11 @@ static void __devinit of_free_probes(const char **probes) if (probes != part_probe_types_def) kfree(probes); } -#endif static struct of_device_id of_flash_match[]; static int __devinit of_flash_probe(struct platform_device *dev) { -#ifdef CONFIG_MTD_PARTITIONS const char **part_probe_types; -#endif const struct of_device_id *match; struct device_node *dp = dev->dev.of_node; struct resource res; @@ -346,7 +331,6 @@ static int __devinit of_flash_probe(struct platform_device *dev) if (err) goto err_out; -#ifdef CONFIG_MTD_PARTITIONS part_probe_types = of_get_probes(dp); err = parse_mtd_partitions(info->cmtd, part_probe_types, &info->parts, 0); @@ -356,13 +340,11 @@ static int __devinit of_flash_probe(struct platform_device *dev) } of_free_probes(part_probe_types); -#ifdef CONFIG_MTD_OF_PARTS if (err == 0) { err = of_mtd_parse_partitions(&dev->dev, dp, &info->parts); if (err < 0) goto err_out; } -#endif if (err == 0) { err = parse_obsolete_partitions(dev, info, dp); @@ -370,11 +352,7 @@ static int __devinit of_flash_probe(struct platform_device *dev) goto err_out; } - if (err > 0) - add_mtd_partitions(info->cmtd, info->parts, err); - else -#endif - add_mtd_device(info->cmtd); + mtd_device_register(info->cmtd, info->parts, err); kfree(mtd_list); diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h index bcfd9f777454..e963b86e296b 100644 --- a/include/linux/mtd/physmap.h +++ b/include/linux/mtd/physmap.h @@ -35,8 +35,6 @@ struct physmap_flash_data { void physmap_configure(unsigned long addr, unsigned long size, int bankwidth, void (*set_vpp)(struct map_info *, int) ); -#ifdef CONFIG_MTD_PARTITIONS - /* * Machines that wish to do flash partition may want to call this function in * their setup routine. @@ -48,6 +46,4 @@ void physmap_configure(unsigned long addr, unsigned long size, */ void physmap_set_partitions(struct mtd_partition *parts, int num_parts); -#endif /* defined(CONFIG_MTD_PARTITIONS) */ - #endif /* __LINUX_MTD_PHYSMAP__ */ -- cgit v1.2.3 From 5ffcaf3d947ab20d52cf750c2c699328cc6ca9ff Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:46 +0100 Subject: mtd: nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 2201ca70af24..a46e9bb847bd 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -47,10 +47,7 @@ #include #include #include - -#ifdef CONFIG_MTD_PARTITIONS #include -#endif /* Define default oob placement schemes for large and small page devices */ static struct nand_ecclayout nand_oob_8 = { @@ -3535,12 +3532,7 @@ void nand_release(struct mtd_info *mtd) if (chip->ecc.mode == NAND_ECC_SOFT_BCH) nand_bch_free((struct nand_bch_control *)chip->ecc.priv); -#ifdef CONFIG_MTD_PARTITIONS - /* Deregister partitions */ - del_mtd_partitions(mtd); -#endif - /* Deregister the device */ - del_mtd_device(mtd); + mtd_device_unregister(mtd); /* Free bad block table memory */ kfree(chip->bbt); -- cgit v1.2.3 From 3ee904f275ccbde7407ba7575006d94774cb20d9 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:47 +0100 Subject: mtd: plat_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/plat_nand.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index caf5a736340a..633c04bf76f6 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -21,10 +21,8 @@ struct plat_nand_data { struct nand_chip chip; struct mtd_info mtd; void __iomem *io_base; -#ifdef CONFIG_MTD_PARTITIONS int nr_parts; struct mtd_partition *parts; -#endif }; /* @@ -101,13 +99,12 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) goto out; } -#ifdef CONFIG_MTD_PARTITIONS if (pdata->chip.part_probe_types) { err = parse_mtd_partitions(&data->mtd, pdata->chip.part_probe_types, &data->parts, 0); if (err > 0) { - add_mtd_partitions(&data->mtd, data->parts, err); + mtd_device_register(&data->mtd, data->parts, err); return 0; } } @@ -115,11 +112,10 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) pdata->chip.set_parts(data->mtd.size, &pdata->chip); if (pdata->chip.partitions) { data->parts = pdata->chip.partitions; - err = add_mtd_partitions(&data->mtd, data->parts, + err = mtd_device_register(&data->mtd, data->parts, pdata->chip.nr_partitions); } else -#endif - err = add_mtd_device(&data->mtd); + err = mtd_device_register(&data->mtd, NULL, 0); if (!err) return err; @@ -149,10 +145,8 @@ static int __devexit plat_nand_remove(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_MEM, 0); nand_release(&data->mtd); -#ifdef CONFIG_MTD_PARTITIONS if (data->parts && data->parts != pdata->chip.partitions) kfree(data->parts); -#endif if (pdata->ctrl.remove) pdata->ctrl.remove(pdev); iounmap(data->io_base); -- cgit v1.2.3 From c06addd3153af8e6ee10079e8afa2c3bb8a1516e Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:48 +0100 Subject: arm: mtd: gemini: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Hans Ulli Kroll Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/arm/mach-gemini/board-wbd111.c | 7 +------ arch/arm/mach-gemini/board-wbd222.c | 7 +------ 2 files changed, 2 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index af7b68a6b258..88cc422ee444 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -84,7 +84,6 @@ static struct sys_timer wbd111_timer = { .init = gemini_timer_init, }; -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition wbd111_partitions[] = { { .name = "RedBoot", @@ -116,11 +115,7 @@ static struct mtd_partition wbd111_partitions[] = { .mask_flags = MTD_WRITEABLE, } }; -#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions) -#else -#define wbd111_partitions NULL -#define wbd111_num_partitions 0 -#endif /* CONFIG_MTD_PARTITIONS */ +#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions) static void __init wbd111_init(void) { diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index 99e5bbecf923..3a220347bc88 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -84,7 +84,6 @@ static struct sys_timer wbd222_timer = { .init = gemini_timer_init, }; -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition wbd222_partitions[] = { { .name = "RedBoot", @@ -116,11 +115,7 @@ static struct mtd_partition wbd222_partitions[] = { .mask_flags = MTD_WRITEABLE, } }; -#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions) -#else -#define wbd222_partitions NULL -#define wbd222_num_partitions 0 -#endif /* CONFIG_MTD_PARTITIONS */ +#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions) static void __init wbd222_init(void) { -- cgit v1.2.3 From 6cbbf2ffa170c4cb5f1d1c0dd0f2bd597813a002 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:49 +0100 Subject: mtd: ixp: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Imre Kaloz Cc: Krzysztof Halasa Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/arm/mach-ixp4xx/ixdp425-setup.c | 4 ---- drivers/mtd/maps/ixp2000.c | 4 ++-- drivers/mtd/maps/ixp4xx.c | 16 ++++++---------- 3 files changed, 8 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 140783386785..dca4f7f9f4f7 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -60,7 +60,6 @@ static struct platform_device ixdp425_flash = { #if defined(CONFIG_MTD_NAND_PLATFORM) || \ defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition ixdp425_partitions[] = { @@ -74,7 +73,6 @@ static struct mtd_partition ixdp425_partitions[] = { .size = MTDPART_SIZ_FULL }, }; -#endif static void ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) @@ -103,11 +101,9 @@ static struct platform_nand_data ixdp425_flash_nand_data = { .nr_chips = 1, .chip_delay = 30, .options = NAND_NO_AUTOINCR, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = ixdp425_partitions, .nr_partitions = ARRAY_SIZE(ixdp425_partitions), -#endif }, .ctrl = { .cmd_ctrl = ixdp425_flash_nand_cmd_ctrl diff --git a/drivers/mtd/maps/ixp2000.c b/drivers/mtd/maps/ixp2000.c index 9639d83a9d6c..c00b9175ba9e 100644 --- a/drivers/mtd/maps/ixp2000.c +++ b/drivers/mtd/maps/ixp2000.c @@ -119,7 +119,7 @@ static int ixp2000_flash_remove(struct platform_device *dev) return 0; if (info->mtd) { - del_mtd_partitions(info->mtd); + mtd_device_unregister(info->mtd); map_destroy(info->mtd); } if (info->map.map_priv_1) @@ -230,7 +230,7 @@ static int ixp2000_flash_probe(struct platform_device *dev) err = parse_mtd_partitions(info->mtd, probes, &info->partitions, 0); if (err > 0) { - err = add_mtd_partitions(info->mtd, info->partitions, err); + err = mtd_device_register(info->mtd, info->partitions, err); if(err) dev_err(&dev->dev, "Could not parse partitions\n"); } diff --git a/drivers/mtd/maps/ixp4xx.c b/drivers/mtd/maps/ixp4xx.c index 1f9fde0dad35..155b21942f47 100644 --- a/drivers/mtd/maps/ixp4xx.c +++ b/drivers/mtd/maps/ixp4xx.c @@ -162,7 +162,7 @@ static int ixp4xx_flash_remove(struct platform_device *dev) return 0; if (info->mtd) { - del_mtd_partitions(info->mtd); + mtd_device_unregister(info->mtd); map_destroy(info->mtd); } if (info->map.virt) @@ -252,10 +252,8 @@ static int ixp4xx_flash_probe(struct platform_device *dev) /* Use the fast version */ info->map.write = ixp4xx_write16; -#ifdef CONFIG_MTD_PARTITIONS nr_parts = parse_mtd_partitions(info->mtd, probes, &info->partitions, dev->resource->start); -#endif if (nr_parts > 0) { part_type = "dynamic"; } else { @@ -263,18 +261,16 @@ static int ixp4xx_flash_probe(struct platform_device *dev) nr_parts = plat->nr_parts; part_type = "static"; } - if (nr_parts == 0) { + if (nr_parts == 0) printk(KERN_NOTICE "IXP4xx flash: no partition info " "available, registering whole flash\n"); - err = add_mtd_device(info->mtd); - } else { + else printk(KERN_NOTICE "IXP4xx flash: using %s partition " "definition\n", part_type); - err = add_mtd_partitions(info->mtd, info->partitions, nr_parts); - if(err) - printk(KERN_ERR "Could not parse partitions\n"); - } + err = mtd_device_register(info->mtd, info->partitions, nr_parts); + if (err) + printk(KERN_ERR "Could not parse partitions\n"); if (err) goto Error; -- cgit v1.2.3 From 3dfad123e81cdf11642aa63da1149ee71a369d2d Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:50 +0100 Subject: mtd: pxa: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Cc: David Woodhouse Cc: Artem Bityutskiy Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/arm/mach-pxa/Kconfig | 1 - drivers/mtd/maps/Kconfig | 1 - drivers/mtd/maps/pxa2xx-flash.c | 18 ++++-------------- drivers/mtd/nand/pxa3xx_nand.c | 13 +++---------- 4 files changed, 7 insertions(+), 26 deletions(-) diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 2fc9f94cdd29..cd19309fd3b8 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -153,7 +153,6 @@ config MACH_XCEP bool "Iskratel Electronics XCEP" select PXA25x select MTD - select MTD_PARTITIONS select MTD_PHYSMAP select MTD_CFI_INTELEXT select MTD_CFI diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 44b1f46458ca..34e72dfda49a 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -161,7 +161,6 @@ config MTD_SBC_GXX config MTD_PXA2XX tristate "CFI Flash device mapped on Intel XScale PXA2xx based boards" depends on (PXA25x || PXA27x) && MTD_CFI_INTELEXT - select MTD_PARTITIONS help This provides a driver for the NOR flash attached to a PXA2xx chip. diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index d8ae634d347e..f59d62f74d44 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -104,23 +104,18 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev) } info->mtd->owner = THIS_MODULE; -#ifdef CONFIG_MTD_PARTITIONS ret = parse_mtd_partitions(info->mtd, probes, &parts, 0); if (ret > 0) { info->nr_parts = ret; info->parts = parts; } -#endif - if (info->nr_parts) { - add_mtd_partitions(info->mtd, info->parts, - info->nr_parts); - } else { + if (!info->nr_parts) printk("Registering %s as whole device\n", info->map.name); - add_mtd_device(info->mtd); - } + + mtd_device_register(info->mtd, info->parts, info->nr_parts); platform_set_drvdata(pdev, info); return 0; @@ -132,12 +127,7 @@ static int __devexit pxa2xx_flash_remove(struct platform_device *dev) platform_set_drvdata(dev, NULL); -#ifdef CONFIG_MTD_PARTITIONS - if (info->nr_parts) - del_mtd_partitions(info->mtd); - else -#endif - del_mtd_device(info->mtd); + mtd_device_unregister(info->mtd); map_destroy(info->mtd); iounmap(info->map.virt); diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index ff0701276d65..1fb3b3a80581 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1119,10 +1119,7 @@ static int pxa3xx_nand_remove(struct platform_device *pdev) clk_put(info->clk); if (mtd) { - del_mtd_device(mtd); -#ifdef CONFIG_MTD_PARTITIONS - del_mtd_partitions(mtd); -#endif + mtd_device_unregister(mtd); kfree(mtd); } return 0; @@ -1149,7 +1146,6 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) return -ENODEV; } -#ifdef CONFIG_MTD_PARTITIONS if (mtd_has_cmdlinepart()) { const char *probes[] = { "cmdlinepart", NULL }; struct mtd_partition *parts; @@ -1158,13 +1154,10 @@ static int pxa3xx_nand_probe(struct platform_device *pdev) nr_parts = parse_mtd_partitions(info->mtd, probes, &parts, 0); if (nr_parts) - return add_mtd_partitions(info->mtd, parts, nr_parts); + return mtd_device_register(info->mtd, parts, nr_parts); } - return add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts); -#else - return 0; -#endif + return mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts); } #ifdef CONFIG_PM -- cgit v1.2.3 From 78352282f3960fa2a60af363749c14b4c138bc63 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:51 +0100 Subject: mtd: s3c2410: remove CONFIG_MTD_PARTITIONS test MTD is now always build with partitioning support so this can be removed. Cc: Ben Dooks Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/arm/mach-s3c2410/mach-amlm5900.c | 5 ----- arch/arm/mach-s3c2410/mach-tct_hammer.c | 6 ------ 2 files changed, 11 deletions(-) diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 44440cbd7620..dabc141243f3 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -58,8 +58,6 @@ #include #include -#ifdef CONFIG_MTD_PARTITIONS - #include #include #include @@ -113,7 +111,6 @@ static struct platform_device amlm5900_device_nor = { .num_resources = 1, .resource = &amlm5900_nor_resource, }; -#endif static struct map_desc amlm5900_iodesc[] __initdata = { }; @@ -158,9 +155,7 @@ static struct platform_device *amlm5900_devices[] __initdata = { &s3c_device_rtc, &s3c_device_usbgadget, &s3c_device_sdi, -#ifdef CONFIG_MTD_PARTITIONS &amlm5900_device_nor, -#endif }; static void __init amlm5900_map_io(void) diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index a15d0621c22f..43c2b831b9e8 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -49,8 +49,6 @@ #include #include -#ifdef CONFIG_MTD_PARTITIONS - #include #include #include @@ -91,8 +89,6 @@ static struct platform_device tct_hammer_device_nor = { .resource = &tct_hammer_nor_resource, }; -#endif - static struct map_desc tct_hammer_iodesc[] __initdata = { }; @@ -133,9 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = { &s3c_device_rtc, &s3c_device_usbgadget, &s3c_device_sdi, -#ifdef CONFIG_MTD_PARTITIONS &tct_hammer_device_nor, -#endif }; static void __init tct_hammer_map_io(void) -- cgit v1.2.3 From fee88c58c7ddf6f0f41b76a59253d55d321da41a Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:52 +0100 Subject: mtd: bfin: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Mike Frysinger Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/blackfin/mach-bf537/boards/stamp.c | 4 ---- arch/blackfin/mach-bf561/boards/acvilon.c | 4 ---- drivers/mtd/maps/Kconfig | 1 - drivers/mtd/maps/bfin-async-flash.c | 21 +++++---------------- 4 files changed, 5 insertions(+), 25 deletions(-) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 3fa335405b31..94ecf100f9ea 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -381,7 +381,6 @@ static struct platform_device net2272_bfin_device = { #endif #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -395,7 +394,6 @@ static struct mtd_partition bfin_plat_nand_partitions[] = { .offset = MTDPART_OFS_APPEND, }, }; -#endif #define BFIN_NAND_PLAT_CLE 2 #define BFIN_NAND_PLAT_ALE 1 @@ -422,11 +420,9 @@ static struct platform_nand_data bfin_plat_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = bfin_plat_nand_partitions, .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), -#endif }, .ctrl = { .cmd_ctrl = bfin_plat_nand_cmd_ctrl, diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index 3926cd909b66..9231a942892b 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -243,7 +243,6 @@ static struct platform_device bfin_uart0_device = { #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -257,7 +256,6 @@ static struct mtd_partition bfin_plat_nand_partitions[] = { .offset = MTDPART_OFS_APPEND, }, }; -#endif #define BFIN_NAND_PLAT_CLE 2 #define BFIN_NAND_PLAT_ALE 3 @@ -286,11 +284,9 @@ static struct platform_nand_data bfin_plat_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = bfin_plat_nand_partitions, .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), -#endif }, .ctrl = { .cmd_ctrl = bfin_plat_nand_cmd_ctrl, diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 34e72dfda49a..93d47414c06d 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -453,7 +453,6 @@ config MTD_PCMCIA_ANONYMOUS config MTD_BFIN_ASYNC tristate "Blackfin BF533-STAMP Flash Chip Support" depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS - select MTD_PARTITIONS default y help Map driver which allows for simultaneous utilization of diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index 85dd18193cf2..d4297a97e100 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -41,9 +41,7 @@ struct async_state { uint32_t flash_ambctl0, flash_ambctl1; uint32_t save_ambctl0, save_ambctl1; unsigned long irq_flags; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts; -#endif }; static void switch_to_flash(struct async_state *state) @@ -124,9 +122,7 @@ static void bfin_flash_copy_to(struct map_info *map, unsigned long to, const voi switch_back(state); } -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -#endif static int __devinit bfin_flash_probe(struct platform_device *pdev) { @@ -169,22 +165,17 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev) return -ENXIO; } -#ifdef CONFIG_MTD_PARTITIONS ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0); if (ret > 0) { pr_devinit(KERN_NOTICE DRIVER_NAME ": Using commandline partition definition\n"); - add_mtd_partitions(state->mtd, pdata->parts, ret); + mtd_device_register(state->mtd, pdata->parts, ret); state->parts = pdata->parts; - } else if (pdata->nr_parts) { pr_devinit(KERN_NOTICE DRIVER_NAME ": Using board partition definition\n"); - add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts); - - } else -#endif - { + mtd_device_register(state->mtd, pdata->parts, pdata->nr_parts); + } else { pr_devinit(KERN_NOTICE DRIVER_NAME ": no partition info available, registering whole flash at once\n"); - add_mtd_device(state->mtd); + mtd_device_register(state->mtd, NULL, 0); } platform_set_drvdata(pdev, state); @@ -196,10 +187,8 @@ static int __devexit bfin_flash_remove(struct platform_device *pdev) { struct async_state *state = platform_get_drvdata(pdev); gpio_free(state->enet_flash_pin); -#ifdef CONFIG_MTD_PARTITIONS - del_mtd_partitions(state->mtd); + mtd_device_unregister(state->mtd); kfree(state->parts); -#endif map_destroy(state->mtd); kfree(state); return 0; -- cgit v1.2.3 From 36cda05b375ad0fbaba3879047b62d270d214376 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:53 +0100 Subject: mtd: cris: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Mikael Starvik Cc: Jesper Nilsson Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/cris/Kconfig | 1 - arch/cris/arch-v10/drivers/axisflashmap.c | 10 ++++++---- arch/cris/arch-v32/drivers/Kconfig | 1 - arch/cris/arch-v32/drivers/axisflashmap.c | 7 ++++--- 4 files changed, 10 insertions(+), 9 deletions(-) diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index a6d03069d0ff..72facbced326 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -274,7 +274,6 @@ config ETRAX_AXISFLASHMAP select MTD_JEDECPROBE if ETRAX_ARCH_V32 select MTD_CHAR select MTD_BLOCK - select MTD_PARTITIONS select MTD_COMPLEX_MAPPINGS help This option enables MTD mapping of flash devices. Needed to use diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c index ed708e19d09e..a4bbdfd37bd8 100644 --- a/arch/cris/arch-v10/drivers/axisflashmap.c +++ b/arch/cris/arch-v10/drivers/axisflashmap.c @@ -372,7 +372,7 @@ static int __init init_axis_flash(void) #ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE if (mymtd) { main_partition.size = mymtd->size; - err = add_mtd_partitions(mymtd, &main_partition, 1); + err = mtd_device_register(mymtd, &main_partition, 1); if (err) panic("axisflashmap: Could not initialize " "partition for whole main mtd device!\n"); @@ -382,10 +382,12 @@ static int __init init_axis_flash(void) if (mymtd) { if (use_default_ptable) { printk(KERN_INFO " Using default partition table.\n"); - err = add_mtd_partitions(mymtd, axis_default_partitions, - NUM_DEFAULT_PARTITIONS); + err = mtd_device_register(mymtd, + axis_default_partitions, + NUM_DEFAULT_PARTITIONS); } else { - err = add_mtd_partitions(mymtd, axis_partitions, pidx); + err = mtd_device_register(mymtd, axis_partitions, + pidx); } if (err) diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 1633b120aa81..41a2732e8b9c 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -405,7 +405,6 @@ config ETRAX_AXISFLASHMAP select MTD_JEDECPROBE select MTD_CHAR select MTD_BLOCK - select MTD_PARTITIONS select MTD_COMPLEX_MAPPINGS help This option enables MTD mapping of flash devices. Needed to use diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 7b155f8203b8..a2bde3744622 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -561,7 +561,7 @@ static int __init init_axis_flash(void) #ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE if (main_mtd) { main_partition.size = main_mtd->size; - err = add_mtd_partitions(main_mtd, &main_partition, 1); + err = mtd_device_register(main_mtd, &main_partition, 1); if (err) panic("axisflashmap: Could not initialize " "partition for whole main mtd device!\n"); @@ -597,7 +597,8 @@ static int __init init_axis_flash(void) mtd_ram->erasesize = (main_mtd ? main_mtd->erasesize : CONFIG_ETRAX_PTABLE_SECTOR); } else { - err = add_mtd_partitions(main_mtd, &partition[part], 1); + err = mtd_device_register(main_mtd, &partition[part], + 1); if (err) panic("axisflashmap: Could not add mtd " "partition %d\n", part); @@ -633,7 +634,7 @@ static int __init init_axis_flash(void) #ifndef CONFIG_ETRAX_VCS_SIM if (aux_mtd) { aux_partition.size = aux_mtd->size; - err = add_mtd_partitions(aux_mtd, &aux_partition, 1); + err = mtd_device_register(aux_mtd, &aux_partition, 1); if (err) panic("axisflashmap: Could not initialize " "aux mtd device!\n"); -- cgit v1.2.3 From 5851becb5bae13ca6525fd0d97116043fcb0e20e Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:54 +0100 Subject: mtd: octeon: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Ralf Baechle Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/mips/cavium-octeon/flash_setup.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c index 008f657116eb..0ee02f5e51cc 100644 --- a/arch/mips/cavium-octeon/flash_setup.c +++ b/arch/mips/cavium-octeon/flash_setup.c @@ -16,7 +16,6 @@ static struct map_info flash_map; static struct mtd_info *mymtd; -#ifdef CONFIG_MTD_PARTITIONS static int nr_parts; static struct mtd_partition *parts; static const char *part_probe_types[] = { @@ -26,7 +25,6 @@ static const char *part_probe_types[] = { #endif NULL }; -#endif /** * Module/ driver initialization. @@ -63,17 +61,10 @@ static int __init flash_init(void) if (mymtd) { mymtd->owner = THIS_MODULE; -#ifdef CONFIG_MTD_PARTITIONS nr_parts = parse_mtd_partitions(mymtd, part_probe_types, &parts, 0); - if (nr_parts > 0) - add_mtd_partitions(mymtd, parts, nr_parts); - else - add_mtd_device(mymtd); -#else - add_mtd_device(mymtd); -#endif + mtd_device_register(mymtd, parts, nr_parts); } else { pr_err("Failed to register MTD device for flash\n"); } -- cgit v1.2.3 From 47854888cc21cb1afd7797c66886a8b06cf35979 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:55 +0100 Subject: mips: tx99: remove CONFIG_MTD_PARTITIONS check CONFIG_MTD_PARTITIONS no longer exists as MTD partitioning is always enabled now. Cc: Ralf Baechle Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- arch/mips/txx9/generic/setup.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 812816c45662..ec38e00b2559 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -639,7 +639,6 @@ void __init txx9_physmap_flash_init(int no, unsigned long addr, .flags = IORESOURCE_MEM, }; struct platform_device *pdev; -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition parts[2]; struct physmap_flash_data pdata_part; @@ -658,7 +657,7 @@ void __init txx9_physmap_flash_init(int no, unsigned long addr, pdata_part.parts = parts; pdata = &pdata_part; } -#endif + pdev = platform_device_alloc("physmap-flash", no); if (!pdev || platform_device_add_resources(pdev, &res, 1) || -- cgit v1.2.3 From 711a632d1f0d3ffc576f7a298f66888f66014d61 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:56 +0100 Subject: mtd: onenand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Kyungmin Park Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/Kconfig | 1 - drivers/mtd/onenand/generic.c | 16 ++++------------ drivers/mtd/onenand/onenand_base.c | 6 +----- 3 files changed, 5 insertions(+), 18 deletions(-) diff --git a/drivers/mtd/onenand/Kconfig b/drivers/mtd/onenand/Kconfig index 4f426195f8db..772ad2966619 100644 --- a/drivers/mtd/onenand/Kconfig +++ b/drivers/mtd/onenand/Kconfig @@ -1,7 +1,6 @@ menuconfig MTD_ONENAND tristate "OneNAND Device Support" depends on MTD - select MTD_PARTITIONS help This enables support for accessing all type of OneNAND flash devices. For further information see diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index ac08750748a3..2d70d354d846 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -30,9 +30,7 @@ */ #define DRIVER_NAME "onenand-flash" -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "cmdlinepart", NULL, }; -#endif struct onenand_info { struct mtd_info mtd; @@ -75,15 +73,13 @@ static int __devinit generic_onenand_probe(struct platform_device *pdev) goto out_iounmap; } -#ifdef CONFIG_MTD_PARTITIONS err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); if (err > 0) - add_mtd_partitions(&info->mtd, info->parts, err); + mtd_device_register(&info->mtd, info->parts, err); else if (err <= 0 && pdata && pdata->parts) - add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); + mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts); else -#endif - err = add_mtd_device(&info->mtd); + err = mtd_device_register(&info->mtd, NULL, 0); platform_set_drvdata(pdev, info); @@ -108,11 +104,7 @@ static int __devexit generic_onenand_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); if (info) { - if (info->parts) - del_mtd_partitions(&info->mtd); - else - del_mtd_device(&info->mtd); - + mtd_device_unregister(&info->mtd); onenand_release(&info->mtd); release_mem_region(res->start, size); iounmap(info->onenand.base); diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 289ee3b1b030..ac9e959802a7 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -4142,12 +4142,8 @@ void onenand_release(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; -#ifdef CONFIG_MTD_PARTITIONS /* Deregister partitions */ - del_mtd_partitions (mtd); -#endif - /* Deregister the device */ - del_mtd_device (mtd); + mtd_device_unregister(mtd); /* Free bad block table memory, if allocated */ if (this->bbm) { -- cgit v1.2.3 From ba52f3a253d12848fa0e9c242a3406963ae98ece Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:57 +0100 Subject: mtd: m25p80: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 68 +++++++++++++++++++------------------------- 1 file changed, 30 insertions(+), 38 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 2b0d0542d9df..35180e475c4c 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -825,6 +825,8 @@ static int __devinit m25p_probe(struct spi_device *spi) struct m25p *flash; struct flash_info *info; unsigned i; + struct mtd_partition *parts = NULL; + int nr_parts = 0; /* Platform data helps sort out which chip type we have, as * well as how this board partitions it. If we don't have @@ -966,48 +968,41 @@ static int __devinit m25p_probe(struct spi_device *spi) /* partitions should match sector boundaries; and it may be good to * use readonly partitions for writeprotected sectors (BP2..BP0). */ - if (mtd_has_partitions()) { - struct mtd_partition *parts = NULL; - int nr_parts = 0; + if (mtd_has_cmdlinepart()) { + static const char *part_probes[] + = { "cmdlinepart", NULL, }; - if (mtd_has_cmdlinepart()) { - static const char *part_probes[] - = { "cmdlinepart", NULL, }; - - nr_parts = parse_mtd_partitions(&flash->mtd, - part_probes, &parts, 0); - } + nr_parts = parse_mtd_partitions(&flash->mtd, + part_probes, &parts, 0); + } - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; - } + if (nr_parts <= 0 && data && data->parts) { + parts = data->parts; + nr_parts = data->nr_parts; + } #ifdef CONFIG_MTD_OF_PARTS - if (nr_parts <= 0 && spi->dev.of_node) { - nr_parts = of_mtd_parse_partitions(&spi->dev, - spi->dev.of_node, &parts); - } + if (nr_parts <= 0 && spi->dev.of_node) { + nr_parts = of_mtd_parse_partitions(&spi->dev, + spi->dev.of_node, &parts); + } #endif - if (nr_parts > 0) { - for (i = 0; i < nr_parts; i++) { - DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " - "{.name = %s, .offset = 0x%llx, " - ".size = 0x%llx (%lldKiB) }\n", - i, parts[i].name, - (long long)parts[i].offset, - (long long)parts[i].size, - (long long)(parts[i].size >> 10)); - } - flash->partitioned = 1; - return add_mtd_partitions(&flash->mtd, parts, nr_parts); + if (nr_parts > 0) { + for (i = 0; i < nr_parts; i++) { + DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " + "{.name = %s, .offset = 0x%llx, " + ".size = 0x%llx (%lldKiB) }\n", + i, parts[i].name, + (long long)parts[i].offset, + (long long)parts[i].size, + (long long)(parts[i].size >> 10)); } - } else if (data && data->nr_parts) - dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", - data->nr_parts, data->name); + flash->partitioned = 1; + } - return add_mtd_device(&flash->mtd) == 1 ? -ENODEV : 0; + return mtd_device_register(&flash->mtd, parts, nr_parts) == 1 ? + -ENODEV : 0; } @@ -1017,10 +1012,7 @@ static int __devexit m25p_remove(struct spi_device *spi) int status; /* Clean up MTD stuff. */ - if (mtd_has_partitions() && flash->partitioned) - status = del_mtd_partitions(&flash->mtd); - else - status = del_mtd_device(&flash->mtd); + status = mtd_device_unregister(&flash->mtd); if (status == 0) { kfree(flash->command); kfree(flash); -- cgit v1.2.3 From 436c06da0482d7fb4843d3e546196b66433c56e6 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:58 +0100 Subject: mtd: dataflash: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/mtd_dataflash.c | 45 +++++++++++++++---------------------- 1 file changed, 18 insertions(+), 27 deletions(-) diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c index c5015cc721d5..13749d458a31 100644 --- a/drivers/mtd/devices/mtd_dataflash.c +++ b/drivers/mtd/devices/mtd_dataflash.c @@ -637,6 +637,8 @@ add_dataflash_otp(struct spi_device *spi, char *name, struct flash_platform_data *pdata = spi->dev.platform_data; char *otp_tag = ""; int err = 0; + struct mtd_partition *parts; + int nr_parts = 0; priv = kzalloc(sizeof *priv, GFP_KERNEL); if (!priv) @@ -675,33 +677,25 @@ add_dataflash_otp(struct spi_device *spi, char *name, pagesize, otp_tag); dev_set_drvdata(&spi->dev, priv); - if (mtd_has_partitions()) { - struct mtd_partition *parts; - int nr_parts = 0; + if (mtd_has_cmdlinepart()) { + static const char *part_probes[] = { "cmdlinepart", NULL, }; - if (mtd_has_cmdlinepart()) { - static const char *part_probes[] - = { "cmdlinepart", NULL, }; - - nr_parts = parse_mtd_partitions(device, - part_probes, &parts, 0); - } + nr_parts = parse_mtd_partitions(device, part_probes, &parts, + 0); + } - if (nr_parts <= 0 && pdata && pdata->parts) { - parts = pdata->parts; - nr_parts = pdata->nr_parts; - } + if (nr_parts <= 0 && pdata && pdata->parts) { + parts = pdata->parts; + nr_parts = pdata->nr_parts; + } - if (nr_parts > 0) { - priv->partitioned = 1; - err = add_mtd_partitions(device, parts, nr_parts); - goto out; - } - } else if (pdata && pdata->nr_parts) - dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", - pdata->nr_parts, device->name); + if (nr_parts > 0) { + priv->partitioned = 1; + err = mtd_device_register(device, parts, nr_parts); + goto out; + } - if (add_mtd_device(device) == 1) + if (mtd_device_register(device, NULL, 0) == 1) err = -ENODEV; out: @@ -939,10 +933,7 @@ static int __devexit dataflash_remove(struct spi_device *spi) DEBUG(MTD_DEBUG_LEVEL1, "%s: remove\n", dev_name(&spi->dev)); - if (mtd_has_partitions() && flash->partitioned) - status = del_mtd_partitions(&flash->mtd); - else - status = del_mtd_device(&flash->mtd); + status = mtd_device_unregister(&flash->mtd); if (status == 0) { dev_set_drvdata(&spi->dev, NULL); kfree(flash); -- cgit v1.2.3 From 98b3979b92143656a2361eb5bdc14f5b50b95bce Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:22:59 +0100 Subject: mtd: sst25l: convert to mtd_device_register() Convert to mtd_device_register() and remove the check for mtd_has_partitions() as we always have partitioning enabled now. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/sst25l.c | 62 +++++++++++++++++++------------------------- 1 file changed, 26 insertions(+), 36 deletions(-) diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c index ac1d2442e101..1e2c430aaad2 100644 --- a/drivers/mtd/devices/sst25l.c +++ b/drivers/mtd/devices/sst25l.c @@ -381,6 +381,8 @@ static int __devinit sst25l_probe(struct spi_device *spi) struct sst25l_flash *flash; struct flash_platform_data *data; int ret, i; + struct mtd_partition *parts = NULL; + int nr_parts = 0; flash_info = sst25l_match_device(spi); if (!flash_info) @@ -420,46 +422,37 @@ static int __devinit sst25l_probe(struct spi_device *spi) flash->mtd.erasesize, flash->mtd.erasesize / 1024, flash->mtd.numeraseregions); - if (mtd_has_partitions()) { - struct mtd_partition *parts = NULL; - int nr_parts = 0; - if (mtd_has_cmdlinepart()) { - static const char *part_probes[] = - {"cmdlinepart", NULL}; + if (mtd_has_cmdlinepart()) { + static const char *part_probes[] = {"cmdlinepart", NULL}; - nr_parts = parse_mtd_partitions(&flash->mtd, - part_probes, - &parts, 0); - } + nr_parts = parse_mtd_partitions(&flash->mtd, + part_probes, + &parts, 0); + } - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; - } + if (nr_parts <= 0 && data && data->parts) { + parts = data->parts; + nr_parts = data->nr_parts; + } - if (nr_parts > 0) { - for (i = 0; i < nr_parts; i++) { - DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " - "{.name = %s, .offset = 0x%llx, " - ".size = 0x%llx (%lldKiB) }\n", - i, parts[i].name, - (long long)parts[i].offset, - (long long)parts[i].size, - (long long)(parts[i].size >> 10)); - } - - flash->partitioned = 1; - return add_mtd_partitions(&flash->mtd, - parts, nr_parts); + if (nr_parts > 0) { + for (i = 0; i < nr_parts; i++) { + DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " + "{.name = %s, .offset = 0x%llx, " + ".size = 0x%llx (%lldKiB) }\n", + i, parts[i].name, + (long long)parts[i].offset, + (long long)parts[i].size, + (long long)(parts[i].size >> 10)); } - } else if (data && data->nr_parts) { - dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", - data->nr_parts, data->name); + flash->partitioned = 1; + return mtd_device_register(&flash->mtd, parts, + nr_parts); } - ret = add_mtd_device(&flash->mtd); + ret = mtd_device_register(&flash->mtd, NULL, 0); if (ret == 1) { kfree(flash); dev_set_drvdata(&spi->dev, NULL); @@ -474,10 +467,7 @@ static int __devexit sst25l_remove(struct spi_device *spi) struct sst25l_flash *flash = dev_get_drvdata(&spi->dev); int ret; - if (mtd_has_partitions() && flash->partitioned) - ret = del_mtd_partitions(&flash->mtd); - else - ret = del_mtd_device(&flash->mtd); + ret = mtd_device_unregister(&flash->mtd); if (ret == 0) kfree(flash); return ret; -- cgit v1.2.3 From bc2ffddc46be60c12462f8ae60ed0eae2a62a17b Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:00 +0100 Subject: mtd: dc21285: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/dc21285.c | 20 +++----------------- 1 file changed, 3 insertions(+), 17 deletions(-) diff --git a/drivers/mtd/maps/dc21285.c b/drivers/mtd/maps/dc21285.c index b3cb3a183809..7a9e1989c977 100644 --- a/drivers/mtd/maps/dc21285.c +++ b/drivers/mtd/maps/dc21285.c @@ -145,17 +145,13 @@ static struct map_info dc21285_map = { /* Partition stuff */ -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition *dc21285_parts; static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; -#endif static int __init init_dc21285(void) { -#ifdef CONFIG_MTD_PARTITIONS int nrparts; -#endif /* Determine bankwidth */ switch (*CSR_SA110_CNTL & (3<<14)) { @@ -204,13 +200,8 @@ static int __init init_dc21285(void) dc21285_mtd->owner = THIS_MODULE; -#ifdef CONFIG_MTD_PARTITIONS nrparts = parse_mtd_partitions(dc21285_mtd, probes, &dc21285_parts, 0); - if (nrparts > 0) - add_mtd_partitions(dc21285_mtd, dc21285_parts, nrparts); - else -#endif - add_mtd_device(dc21285_mtd); + mtd_device_register(dc21285_mtd, dc21285_parts, nrparts); if(machine_is_ebsa285()) { /* @@ -232,14 +223,9 @@ static int __init init_dc21285(void) static void __exit cleanup_dc21285(void) { -#ifdef CONFIG_MTD_PARTITIONS - if (dc21285_parts) { - del_mtd_partitions(dc21285_mtd); + mtd_device_unregister(dc21285_mtd); + if (dc21285_parts) kfree(dc21285_parts); - } else -#endif - del_mtd_device(dc21285_mtd); - map_destroy(dc21285_mtd); iounmap(dc21285_map.virt); } -- cgit v1.2.3 From 5af3aa24cf552e1a8c2874697d1f30769d8abf5c Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:01 +0100 Subject: mtd: edb7312: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/edb7312.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) diff --git a/drivers/mtd/maps/edb7312.c b/drivers/mtd/maps/edb7312.c index be9e90b44587..fe42a212bb3e 100644 --- a/drivers/mtd/maps/edb7312.c +++ b/drivers/mtd/maps/edb7312.c @@ -15,10 +15,7 @@ #include #include #include - -#ifdef CONFIG_MTD_PARTITIONS #include -#endif #define WINDOW_ADDR 0x00000000 /* physical properties of flash */ #define WINDOW_SIZE 0x01000000 @@ -40,8 +37,6 @@ struct map_info edb7312nor_map = { .phys = WINDOW_ADDR, }; -#ifdef CONFIG_MTD_PARTITIONS - /* * MTD partitioning stuff */ @@ -66,8 +61,6 @@ static struct mtd_partition static_partitions[3] = static const char *probes[] = { "RedBoot", "cmdlinepart", NULL }; -#endif - static int mtd_parts_nb = 0; static struct mtd_partition *mtd_parts = 0; @@ -96,27 +89,24 @@ static int __init init_edb7312nor(void) if (mymtd) { mymtd->owner = THIS_MODULE; -#ifdef CONFIG_MTD_PARTITIONS mtd_parts_nb = parse_mtd_partitions(mymtd, probes, &mtd_parts, MTDID); if (mtd_parts_nb > 0) - part_type = "detected"; + part_type = "detected"; - if (mtd_parts_nb == 0) - { + if (mtd_parts_nb == 0) { mtd_parts = static_partitions; mtd_parts_nb = ARRAY_SIZE(static_partitions); part_type = "static"; } -#endif - add_mtd_device(mymtd); + if (mtd_parts_nb == 0) - printk(KERN_NOTICE MSG_PREFIX "no partition info available\n"); + printk(KERN_NOTICE MSG_PREFIX "no partition info available\n"); else - { printk(KERN_NOTICE MSG_PREFIX "using %s partition definition\n", part_type); - add_mtd_partitions(mymtd, mtd_parts, mtd_parts_nb); - } + /* Register the whole device first. */ + mtd_device_register(mymtd, NULL, 0); + mtd_device_register(mymtd, mtd_parts, mtd_parts_nb); return 0; } @@ -127,7 +117,7 @@ static int __init init_edb7312nor(void) static void __exit cleanup_edb7312nor(void) { if (mymtd) { - del_mtd_device(mymtd); + mtd_device_unregister(mymtd); map_destroy(mymtd); } if (edb7312nor_map.virt) { -- cgit v1.2.3 From fdbf3bf6b855233cd618021c702accb69b8b10bc Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:02 +0100 Subject: mtd: gpio-addr-flash: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 1 - drivers/mtd/maps/gpio-addr-flash.c | 27 ++++++++++----------------- 2 files changed, 10 insertions(+), 18 deletions(-) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 93d47414c06d..4cda05d2e93c 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -464,7 +464,6 @@ config MTD_GPIO_ADDR tristate "GPIO-assisted Flash Chip Support" depends on GENERIC_GPIO || GPIOLIB depends on MTD_COMPLEX_MAPPINGS - select MTD_PARTITIONS help Map driver which allows flashes to be partially physically addressed and assisted by GPIOs. diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c index af5707a80205..7568c5f8b8ae 100644 --- a/drivers/mtd/maps/gpio-addr-flash.c +++ b/drivers/mtd/maps/gpio-addr-flash.c @@ -155,9 +155,7 @@ static void gf_copy_to(struct map_info *map, unsigned long to, const void *from, memcpy_toio(map->virt + (to % state->win_size), from, len); } -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -#endif /** * gpio_flash_probe() - setup a mapping for a GPIO assisted flash @@ -189,7 +187,7 @@ static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; */ static int __devinit gpio_flash_probe(struct platform_device *pdev) { - int ret; + int nr_parts; size_t i, arr_size; struct physmap_flash_data *pdata; struct resource *memory; @@ -254,24 +252,21 @@ static int __devinit gpio_flash_probe(struct platform_device *pdev) return -ENXIO; } -#ifdef CONFIG_MTD_PARTITIONS - ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0); - if (ret > 0) { + nr_parts = parse_mtd_partitions(state->mtd, part_probe_types, + &pdata->parts, 0); + if (nr_parts > 0) { pr_devinit(KERN_NOTICE PFX "Using commandline partition definition\n"); - add_mtd_partitions(state->mtd, pdata->parts, ret); kfree(pdata->parts); - } else if (pdata->nr_parts) { pr_devinit(KERN_NOTICE PFX "Using board partition definition\n"); - add_mtd_partitions(state->mtd, pdata->parts, pdata->nr_parts); - - } else -#endif - { + nr_parts = pdata->nr_parts; + } else { pr_devinit(KERN_NOTICE PFX "no partition info available, registering whole flash at once\n"); - add_mtd_device(state->mtd); + nr_parts = 0; } + mtd_device_register(state->mtd, pdata->parts, nr_parts); + return 0; } @@ -282,9 +277,7 @@ static int __devexit gpio_flash_remove(struct platform_device *pdev) do { gpio_free(state->gpio_addrs[i]); } while (++i < state->gpio_count); -#ifdef CONFIG_MTD_PARTITIONS - del_mtd_partitions(state->mtd); -#endif + mtd_device_unregister(state->mtd); map_destroy(state->mtd); kfree(state); return 0; -- cgit v1.2.3 From 360e40aedb59799fef4ff58fe6b9436cd487f6e6 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:03 +0100 Subject: mtd: h720x-flash: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/h720x-flash.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/maps/h720x-flash.c b/drivers/mtd/maps/h720x-flash.c index 72c724fa8c27..7f035860a36b 100644 --- a/drivers/mtd/maps/h720x-flash.c +++ b/drivers/mtd/maps/h720x-flash.c @@ -92,18 +92,16 @@ static int __init h720x_mtd_init(void) if (mymtd) { mymtd->owner = THIS_MODULE; -#ifdef CONFIG_MTD_PARTITIONS nr_mtd_parts = parse_mtd_partitions(mymtd, probes, &mtd_parts, 0); if (nr_mtd_parts > 0) part_type = "command line"; -#endif if (nr_mtd_parts <= 0) { mtd_parts = h720x_partitions; nr_mtd_parts = NUM_PARTITIONS; part_type = "builtin"; } printk(KERN_INFO "Using %s partition table\n", part_type); - add_mtd_partitions(mymtd, mtd_parts, nr_mtd_parts); + mtd_device_register(mymtd, mtd_parts, nr_mtd_parts); return 0; } @@ -118,7 +116,7 @@ static void __exit h720x_mtd_cleanup(void) { if (mymtd) { - del_mtd_partitions(mymtd); + mtd_device_unregister(mymtd); map_destroy(mymtd); } -- cgit v1.2.3 From 96b639fd5319986fc21f9d99a78cae97d099bc4c Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:04 +0100 Subject: mtd: impa7: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/impa7.c | 22 +++------------------- 1 file changed, 3 insertions(+), 19 deletions(-) diff --git a/drivers/mtd/maps/impa7.c b/drivers/mtd/maps/impa7.c index 998a27da97f3..404a50cbafa0 100644 --- a/drivers/mtd/maps/impa7.c +++ b/drivers/mtd/maps/impa7.c @@ -15,10 +15,7 @@ #include #include #include - -#ifdef CONFIG_MTD_PARTITIONS #include -#endif #define WINDOW_ADDR0 0x00000000 /* physical properties of flash */ #define WINDOW_SIZE0 0x00800000 @@ -49,8 +46,6 @@ static struct map_info impa7_map[NUM_FLASHBANKS] = { }, }; -#ifdef CONFIG_MTD_PARTITIONS - /* * MTD partitioning stuff */ @@ -66,8 +61,6 @@ static struct mtd_partition static_partitions[] = static int mtd_parts_nb[NUM_FLASHBANKS]; static struct mtd_partition *mtd_parts[NUM_FLASHBANKS]; -#endif - static const char *probes[] = { "cmdlinepart", NULL }; static int __init init_impa7(void) @@ -104,7 +97,6 @@ static int __init init_impa7(void) if (impa7_mtd[i]) { impa7_mtd[i]->owner = THIS_MODULE; devicesfound++; -#ifdef CONFIG_MTD_PARTITIONS mtd_parts_nb[i] = parse_mtd_partitions(impa7_mtd[i], probes, &mtd_parts[i], @@ -120,12 +112,8 @@ static int __init init_impa7(void) printk(KERN_NOTICE MSG_PREFIX "using %s partition definition\n", part_type); - add_mtd_partitions(impa7_mtd[i], - mtd_parts[i], mtd_parts_nb[i]); -#else - add_mtd_device(impa7_mtd[i]); - -#endif + mtd_device_register(impa7_mtd[i], + mtd_parts[i], mtd_parts_nb[i]); } else iounmap((void *)impa7_map[i].virt); @@ -138,11 +126,7 @@ static void __exit cleanup_impa7(void) int i; for (i=0; i Date: Mon, 23 May 2011 10:23:05 +0100 Subject: mtd: intel_vr_nor: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/intel_vr_nor.c | 19 ++----------------- 1 file changed, 2 insertions(+), 17 deletions(-) diff --git a/drivers/mtd/maps/intel_vr_nor.c b/drivers/mtd/maps/intel_vr_nor.c index fc1998512eb4..d2f47be8754b 100644 --- a/drivers/mtd/maps/intel_vr_nor.c +++ b/drivers/mtd/maps/intel_vr_nor.c @@ -66,33 +66,18 @@ struct vr_nor_mtd { static void __devexit vr_nor_destroy_partitions(struct vr_nor_mtd *p) { - if (p->nr_parts > 0) { -#if defined(CONFIG_MTD_PARTITIONS) || defined(CONFIG_MTD_PARTITIONS_MODULE) - del_mtd_partitions(p->info); -#endif - } else - del_mtd_device(p->info); + mtd_device_unregister(p->info); } static int __devinit vr_nor_init_partitions(struct vr_nor_mtd *p) { - int err = 0; -#if defined(CONFIG_MTD_PARTITIONS) || defined(CONFIG_MTD_PARTITIONS_MODULE) struct mtd_partition *parts; static const char *part_probes[] = { "cmdlinepart", NULL }; -#endif /* register the flash bank */ -#if defined(CONFIG_MTD_PARTITIONS) || defined(CONFIG_MTD_PARTITIONS_MODULE) /* partition the flash bank */ p->nr_parts = parse_mtd_partitions(p->info, part_probes, &parts, 0); - if (p->nr_parts > 0) - err = add_mtd_partitions(p->info, parts, p->nr_parts); -#endif - if (p->nr_parts <= 0) - err = add_mtd_device(p->info); - - return err; + return mtd_device_register(p->info, parts, p->nr_parts); } static void __devexit vr_nor_destroy_mtd_setup(struct vr_nor_mtd *p) -- cgit v1.2.3 From 902766bfdfdacc01deb6857bada61cd1e5dc40b0 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:06 +0100 Subject: mtd: latch-addr-flash: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/latch-addr-flash.c | 45 ++++++++++++++----------------------- 1 file changed, 17 insertions(+), 28 deletions(-) diff --git a/drivers/mtd/maps/latch-addr-flash.c b/drivers/mtd/maps/latch-addr-flash.c index ee2548085334..5936c466e901 100644 --- a/drivers/mtd/maps/latch-addr-flash.c +++ b/drivers/mtd/maps/latch-addr-flash.c @@ -112,18 +112,9 @@ static int latch_addr_flash_remove(struct platform_device *dev) latch_addr_data = dev->dev.platform_data; if (info->mtd != NULL) { - if (mtd_has_partitions()) { - if (info->nr_parts) { - del_mtd_partitions(info->mtd); - kfree(info->parts); - } else if (latch_addr_data->nr_parts) { - del_mtd_partitions(info->mtd); - } else { - del_mtd_device(info->mtd); - } - } else { - del_mtd_device(info->mtd); - } + if (info->nr_parts) + kfree(info->parts); + mtd_device_unregister(info->mtd); map_destroy(info->mtd); } @@ -215,23 +206,21 @@ static int __devinit latch_addr_flash_probe(struct platform_device *dev) } info->mtd->owner = THIS_MODULE; - if (mtd_has_partitions()) { - - err = parse_mtd_partitions(info->mtd, - (const char **)part_probe_types, - &info->parts, 0); - if (err > 0) { - add_mtd_partitions(info->mtd, info->parts, err); - return 0; - } - if (latch_addr_data->nr_parts) { - pr_notice("Using latch-addr-flash partition information\n"); - add_mtd_partitions(info->mtd, latch_addr_data->parts, - latch_addr_data->nr_parts); - return 0; - } + err = parse_mtd_partitions(info->mtd, (const char **)part_probe_types, + &info->parts, 0); + if (err > 0) { + mtd_device_register(info->mtd, info->parts, err); + return 0; + } + if (latch_addr_data->nr_parts) { + pr_notice("Using latch-addr-flash partition information\n"); + mtd_device_register(info->mtd, + latch_addr_data->parts, + latch_addr_data->nr_parts); + return 0; } - add_mtd_device(info->mtd); + + mtd_device_register(info->mtd, NULL, 0); return 0; iounmap: -- cgit v1.2.3 From 095dd5003f531514170fd1645ab31ed88b56aaf5 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:07 +0100 Subject: mtd: plat-ram: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/plat-ram.c | 24 +++++++++--------------- 1 file changed, 9 insertions(+), 15 deletions(-) diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 76a76be5a7bd..9ca1eccba4bc 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -94,14 +94,11 @@ static int platram_remove(struct platform_device *pdev) return 0; if (info->mtd) { -#ifdef CONFIG_MTD_PARTITIONS + mtd_device_unregister(info->mtd); if (info->partitions) { - del_mtd_partitions(info->mtd); if (info->free_partitions) kfree(info->partitions); } -#endif - del_mtd_device(info->mtd); map_destroy(info->mtd); } @@ -231,7 +228,6 @@ static int platram_probe(struct platform_device *pdev) /* check to see if there are any available partitions, or wether * to add this device whole */ -#ifdef CONFIG_MTD_PARTITIONS if (!pdata->nr_partitions) { /* try to probe using the supplied probe type */ if (pdata->probes) { @@ -239,24 +235,22 @@ static int platram_probe(struct platform_device *pdev) &info->partitions, 0); info->free_partitions = 1; if (err > 0) - err = add_mtd_partitions(info->mtd, + err = mtd_device_register(info->mtd, info->partitions, err); } } /* use the static mapping */ else - err = add_mtd_partitions(info->mtd, pdata->partitions, - pdata->nr_partitions); -#endif /* CONFIG_MTD_PARTITIONS */ - - if (add_mtd_device(info->mtd)) { - dev_err(&pdev->dev, "add_mtd_device() failed\n"); - err = -ENOMEM; - } - + err = mtd_device_register(info->mtd, pdata->partitions, + pdata->nr_partitions); if (!err) dev_info(&pdev->dev, "registered mtd device\n"); + /* add the whole device. */ + err = mtd_device_register(info->mtd, NULL, 0); + if (err) + dev_err(&pdev->dev, "failed to register the entire device\n"); + return err; exit_free: -- cgit v1.2.3 From 16b0eb154393831eddcf4f19cdca323611c86c9f Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:08 +0100 Subject: mtd: rbtx4939-flash: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/rbtx4939-flash.c | 24 +++++------------------- 1 file changed, 5 insertions(+), 19 deletions(-) diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c index 83ed64512c5e..761fb459d2c7 100644 --- a/drivers/mtd/maps/rbtx4939-flash.c +++ b/drivers/mtd/maps/rbtx4939-flash.c @@ -25,10 +25,8 @@ struct rbtx4939_flash_info { struct mtd_info *mtd; struct map_info map; -#ifdef CONFIG_MTD_PARTITIONS int nr_parts; struct mtd_partition *parts; -#endif }; static int rbtx4939_flash_remove(struct platform_device *dev) @@ -41,28 +39,18 @@ static int rbtx4939_flash_remove(struct platform_device *dev) platform_set_drvdata(dev, NULL); if (info->mtd) { -#ifdef CONFIG_MTD_PARTITIONS struct rbtx4939_flash_data *pdata = dev->dev.platform_data; - if (info->nr_parts) { - del_mtd_partitions(info->mtd); + if (info->nr_parts) kfree(info->parts); - } else if (pdata->nr_parts) - del_mtd_partitions(info->mtd); - else - del_mtd_device(info->mtd); -#else - del_mtd_device(info->mtd); -#endif + mtd_device_unregister(info->mtd); map_destroy(info->mtd); } return 0; } static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probe_types[] = { "cmdlinepart", NULL }; -#endif static int rbtx4939_flash_probe(struct platform_device *dev) { @@ -120,23 +108,21 @@ static int rbtx4939_flash_probe(struct platform_device *dev) if (err) goto err_out; -#ifdef CONFIG_MTD_PARTITIONS err = parse_mtd_partitions(info->mtd, part_probe_types, &info->parts, 0); if (err > 0) { - add_mtd_partitions(info->mtd, info->parts, err); + mtd_device_register(info->mtd, info->parts, err); info->nr_parts = err; return 0; } if (pdata->nr_parts) { pr_notice("Using rbtx4939 partition information\n"); - add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts); + mtd_device_register(info->mtd, pdata->parts, pdata->nr_parts); return 0; } -#endif - add_mtd_device(info->mtd); + mtd_device_register(info->mtd, NULL, 0); return 0; err_out: -- cgit v1.2.3 From 2fe2e24ead67530d624e0bb23da9f0bfdec44f8c Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:09 +0100 Subject: mtd: sa1100-flash: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 2 +- drivers/mtd/maps/sa1100-flash.c | 21 ++++++--------------- 2 files changed, 7 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 4cda05d2e93c..d949eee14f14 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -347,7 +347,7 @@ config MTD_CDB89712 config MTD_SA1100 tristate "CFI Flash device mapped on StrongARM SA11x0" - depends on MTD_CFI && ARCH_SA1100 && MTD_PARTITIONS + depends on MTD_CFI && ARCH_SA1100 help This enables access to the flash chips on most platforms based on the SA1100 and SA1110, including the Assabet and the Compaq iPAQ. diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index da875908ea8e..a9b5e0e5c4c5 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -226,12 +226,7 @@ static void sa1100_destroy(struct sa_info *info, struct flash_platform_data *pla int i; if (info->mtd) { - if (info->nr_parts == 0) - del_mtd_device(info->mtd); -#ifdef CONFIG_MTD_PARTITIONS - else - del_mtd_partitions(info->mtd); -#endif + mtd_device_unregister(info->mtd); if (info->mtd != info->subdev[0].mtd) mtd_concat_destroy(info->mtd); } @@ -363,28 +358,24 @@ static int __devinit sa1100_mtd_probe(struct platform_device *pdev) /* * Partition selection stuff. */ -#ifdef CONFIG_MTD_PARTITIONS nr_parts = parse_mtd_partitions(info->mtd, part_probes, &parts, 0); if (nr_parts > 0) { info->parts = parts; part_type = "dynamic"; - } else -#endif - { + } else { parts = plat->parts; nr_parts = plat->nr_parts; part_type = "static"; } - if (nr_parts == 0) { + if (nr_parts == 0) printk(KERN_NOTICE "SA1100 flash: no partition info " "available, registering whole flash\n"); - add_mtd_device(info->mtd); - } else { + else printk(KERN_NOTICE "SA1100 flash: using %s partition " "definition\n", part_type); - add_mtd_partitions(info->mtd, parts, nr_parts); - } + + mtd_device_register(info->mtd, parts, nr_parts); info->nr_parts = nr_parts; -- cgit v1.2.3 From f6c11c1826a6ed853019cf2bdf51489d10c07642 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:10 +0100 Subject: mtd: scx200_docflash: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 2 +- drivers/mtd/maps/scx200_docflash.c | 16 +++------------- 2 files changed, 4 insertions(+), 14 deletions(-) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index d949eee14f14..add25a94ce4a 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -184,7 +184,7 @@ config MTD_VMAX config MTD_SCx200_DOCFLASH tristate "Flash device mapped with DOCCS on NatSemi SCx200" - depends on SCx200 && MTD_CFI && MTD_PARTITIONS + depends on SCx200 && MTD_CFI help Enable support for a flash chip mapped using the DOCCS signal on a National Semiconductor SCx200 processor. diff --git a/drivers/mtd/maps/scx200_docflash.c b/drivers/mtd/maps/scx200_docflash.c index 027e628a4f1d..f1c1f737d0d7 100644 --- a/drivers/mtd/maps/scx200_docflash.c +++ b/drivers/mtd/maps/scx200_docflash.c @@ -44,7 +44,6 @@ static struct resource docmem = { static struct mtd_info *mymtd; -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition partition_info[] = { { .name = "DOCCS Boot kernel", @@ -68,8 +67,6 @@ static struct mtd_partition partition_info[] = { }, }; #define NUM_PARTITIONS ARRAY_SIZE(partition_info) -#endif - static struct map_info scx200_docflash_map = { .name = "NatSemi SCx200 DOCCS Flash", @@ -198,24 +195,17 @@ static int __init init_scx200_docflash(void) mymtd->owner = THIS_MODULE; -#ifdef CONFIG_MTD_PARTITIONS partition_info[3].offset = mymtd->size-partition_info[3].size; partition_info[2].size = partition_info[3].offset-partition_info[2].offset; - add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS); -#else - add_mtd_device(mymtd); -#endif + mtd_device_register(mymtd, partition_info, NUM_PARTITIONS); + return 0; } static void __exit cleanup_scx200_docflash(void) { if (mymtd) { -#ifdef CONFIG_MTD_PARTITIONS - del_mtd_partitions(mymtd); -#else - del_mtd_device(mymtd); -#endif + mtd_device_unregister(mymtd); map_destroy(mymtd); } if (scx200_docflash_map.virt) { -- cgit v1.2.3 From b5c0a4ea1ba0b6840bc8522c6ce901a7658b395a Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:11 +0100 Subject: mtd: tqm8xll: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/tqm8xxl.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-) diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c index 0718dfb3ee64..d78587990e7e 100644 --- a/drivers/mtd/maps/tqm8xxl.c +++ b/drivers/mtd/maps/tqm8xxl.c @@ -62,7 +62,6 @@ static void __iomem *start_scan_addr; * "struct map_desc *_io_desc" for the corresponding machine. */ -#ifdef CONFIG_MTD_PARTITIONS /* Currently, TQM8xxL has up to 8MiB flash */ static unsigned long tqm8xxl_max_flash_size = 0x00800000; @@ -107,7 +106,6 @@ static struct mtd_partition tqm8xxl_fs_partitions[] = { //.size = MTDPART_SIZ_FULL, } }; -#endif static int __init init_tqm_mtd(void) { @@ -188,7 +186,6 @@ static int __init init_tqm_mtd(void) goto error_mem; } -#ifdef CONFIG_MTD_PARTITIONS /* * Select Static partition definitions */ @@ -201,21 +198,14 @@ static int __init init_tqm_mtd(void) part_banks[1].nums = ARRAY_SIZE(tqm8xxl_fs_partitions); for(idx = 0; idx < num_banks ; idx++) { - if (part_banks[idx].nums == 0) { + if (part_banks[idx].nums == 0) printk(KERN_NOTICE "TQM flash%d: no partition info available, registering whole flash at once\n", idx); - add_mtd_device(mtd_banks[idx]); - } else { + else printk(KERN_NOTICE "TQM flash%d: Using %s partition definition\n", idx, part_banks[idx].type); - add_mtd_partitions(mtd_banks[idx], part_banks[idx].mtd_part, - part_banks[idx].nums); - } + mtd_device_register(mtd_banks[idx], part_banks[idx].mtd_part, + part_banks[idx].nums); } -#else - printk(KERN_NOTICE "TQM flash: registering %d whole flash banks at once\n", num_banks); - for(idx = 0 ; idx < num_banks ; idx++) - add_mtd_device(mtd_banks[idx]); -#endif return 0; error_mem: for(idx = 0 ; idx < FLASH_BANK_MAX ; idx++) { @@ -237,7 +227,7 @@ static void __exit cleanup_tqm_mtd(void) for(idx = 0 ; idx < num_banks ; idx++) { /* destroy mtd_info previously allocated */ if (mtd_banks[idx]) { - del_mtd_partitions(mtd_banks[idx]); + mtd_device_unregister(mtd_banks[idx]); map_destroy(mtd_banks[idx]); } /* release map_info not used anymore */ -- cgit v1.2.3 From 5e7e96866df7a9ff7733bd1660e0a3c510bf1b45 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:12 +0100 Subject: mtd: uclinux: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/Kconfig | 2 +- drivers/mtd/maps/uclinux.c | 12 ++---------- 2 files changed, 3 insertions(+), 11 deletions(-) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index add25a94ce4a..44032433730d 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -472,7 +472,7 @@ config MTD_GPIO_ADDR config MTD_UCLINUX bool "Generic uClinux RAM/ROM filesystem support" - depends on MTD_PARTITIONS && MTD_RAM=y && !MMU + depends on MTD_RAM=y && !MMU help Map driver to support image based filesystems for uClinux. diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index 35009294b435..6793074f3f40 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -89,11 +89,7 @@ static int __init uclinux_mtd_init(void) mtd->priv = mapp; uclinux_ram_mtdinfo = mtd; -#ifdef CONFIG_MTD_PARTITIONS - add_mtd_partitions(mtd, uclinux_romfs, NUM_PARTITIONS); -#else - add_mtd_device(mtd); -#endif + mtd_device_register(mtd, uclinux_romfs, NUM_PARTITIONS); return(0); } @@ -103,11 +99,7 @@ static int __init uclinux_mtd_init(void) static void __exit uclinux_mtd_cleanup(void) { if (uclinux_ram_mtdinfo) { -#ifdef CONFIG_MTD_PARTITIONS - del_mtd_partitions(uclinux_ram_mtdinfo); -#else - del_mtd_device(uclinux_ram_mtdinfo); -#endif + mtd_device_unregister(uclinux_ram_mtdinfo); map_destroy(uclinux_ram_mtdinfo); uclinux_ram_mtdinfo = NULL; } -- cgit v1.2.3 From e6232b42438cefc06124b1e09613d8b27f6b6f5d Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:13 +0100 Subject: mtd: atmel_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/atmel_nand.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 380912f24ad8..b300705d41cb 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -495,11 +495,8 @@ static int __init atmel_nand_probe(struct platform_device *pdev) struct resource *regs; struct resource *mem; int res; - -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *partitions = NULL; int num_partitions = 0; -#endif mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) { @@ -657,7 +654,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev) goto err_scan_tail; } -#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_CMDLINE_PARTS mtd->name = "atmel_nand"; num_partitions = parse_mtd_partitions(mtd, part_probes, @@ -673,17 +669,11 @@ static int __init atmel_nand_probe(struct platform_device *pdev) goto err_no_partitions; } - res = add_mtd_partitions(mtd, partitions, num_partitions); -#else - res = add_mtd_device(mtd); -#endif - + res = mtd_device_register(mtd, partitions, num_partitions); if (!res) return res; -#ifdef CONFIG_MTD_PARTITIONS err_no_partitions: -#endif nand_release(mtd); err_scan_tail: err_scan_ident: -- cgit v1.2.3 From 63c9dd92579fbaa59fead0e9b75dd7db43130d21 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:14 +0100 Subject: mtd: bcm_umi_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/bcm_umi_nand.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index dfe262c726fb..9ec280738a9a 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -52,9 +52,7 @@ static const __devinitconst char gBanner[] = KERN_INFO \ "BCM UMI MTD NAND Driver: 1.00\n"; -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; -#endif #if NAND_ECC_BCH static uint8_t scan_ff_pattern[] = { 0xff }; @@ -509,7 +507,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) kfree(board_mtd); return -EIO; } - add_mtd_partitions(board_mtd, partition_info, nr_partitions); + mtd_device_register(board_mtd, partition_info, nr_partitions); } /* Return happy */ -- cgit v1.2.3 From 88146872f0fbd89e425e3e0db71d42df8db9d932 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:15 +0100 Subject: mtd: bf5xx_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/bf5xx_nand.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 79947bea4d57..dd899cb5d366 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -659,15 +659,10 @@ static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info) static int __devinit bf5xx_nand_add_partition(struct bf5xx_nand_info *info) { struct mtd_info *mtd = &info->mtd; - -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts = info->platform->partitions; int nr = info->platform->nr_partitions; - return add_mtd_partitions(mtd, parts, nr); -#else - return add_mtd_device(mtd); -#endif + return mtd_device_register(mtd, parts, nr); } static int __devexit bf5xx_nand_remove(struct platform_device *pdev) -- cgit v1.2.3 From 46720bbf67224660271a04a7ab03913fd0d3c206 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:16 +0100 Subject: mtd: cafe_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/cafe_nand.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index e06c8983978e..87ebb4e5b0c3 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -90,9 +90,7 @@ static unsigned int numtimings; static int timing[3]; module_param_array(timing, int, &numtimings, 0644); -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; -#endif /* Hrm. Why isn't this already conditional on something in the struct device? */ #define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0) @@ -632,10 +630,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, struct cafe_priv *cafe; uint32_t ctrl; int err = 0; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts; int nr_parts; -#endif /* Very old versions shared the same PCI ident for all three functions on the chip. Verify the class too... */ @@ -804,9 +800,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, pci_set_drvdata(pdev, mtd); /* We register the whole device first, separate from the partitions */ - add_mtd_device(mtd); + mtd_device_register(mtd, NULL, 0); -#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_CMDLINE_PARTS mtd->name = "cafe_nand"; #endif @@ -814,9 +809,8 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, if (nr_parts > 0) { cafe->parts = parts; dev_info(&cafe->pdev->dev, "%d partitions found\n", nr_parts); - add_mtd_partitions(mtd, parts, nr_parts); + mtd_device_register(mtd, parts, nr_parts); } -#endif goto out; out_irq: @@ -838,7 +832,6 @@ static void __devexit cafe_nand_remove(struct pci_dev *pdev) struct mtd_info *mtd = pci_get_drvdata(pdev); struct cafe_priv *cafe = mtd->priv; - del_mtd_device(mtd); /* Disable NAND IRQ in global IRQ mask register */ cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK); free_irq(pdev->irq, mtd); -- cgit v1.2.3 From a17f7ca510035beee7527f352b3a46fe5dcabce1 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:17 +0100 Subject: mtd: cs553x_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/cs553x_nand.c | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 71c35a0b9826..f59ad1f2d5db 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -277,22 +277,15 @@ static int is_geode(void) return 0; } - -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "cmdlinepart", NULL }; -#endif - static int __init cs553x_init(void) { int err = -ENXIO; int i; uint64_t val; - -#ifdef CONFIG_MTD_PARTITIONS int mtd_parts_nb = 0; struct mtd_partition *mtd_parts = NULL; -#endif /* If the CPU isn't a Geode GX or LX, abort */ if (!is_geode()) @@ -324,17 +317,11 @@ static int __init cs553x_init(void) if (cs553x_mtd[i]) { /* If any devices registered, return success. Else the last error. */ -#ifdef CONFIG_MTD_PARTITIONS mtd_parts_nb = parse_mtd_partitions(cs553x_mtd[i], part_probes, &mtd_parts, 0); - if (mtd_parts_nb > 0) { + if (mtd_parts_nb > 0) printk(KERN_NOTICE "Using command line partition definition\n"); - add_mtd_partitions(cs553x_mtd[i], mtd_parts, mtd_parts_nb); - } else { - add_mtd_device(cs553x_mtd[i]); - } -#else - add_mtd_device(cs553x_mtd[i]); -#endif + mtd_device_register(cs553x_mtd[i], mtd_parts, + mtd_parts_nb); err = 0; } } -- cgit v1.2.3 From 098771158813fb391dd6c1c8b907599db91fb0c7 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:18 +0100 Subject: mtd: davinci_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the check for mtd_has_partitions() as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/davinci_nand.c | 51 +++++++++++++++++------------------------ 1 file changed, 21 insertions(+), 30 deletions(-) diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index aff3468867ac..1f34951ae1a7 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -530,6 +530,8 @@ static int __init nand_davinci_probe(struct platform_device *pdev) int ret; uint32_t val; nand_ecc_modes_t ecc_mode; + struct mtd_partition *mtd_parts = NULL; + int mtd_parts_nb = 0; /* insist on board-specific configuration */ if (!pdata) @@ -749,41 +751,33 @@ syndrome_done: if (ret < 0) goto err_scan; - if (mtd_has_partitions()) { - struct mtd_partition *mtd_parts = NULL; - int mtd_parts_nb = 0; + if (mtd_has_cmdlinepart()) { + static const char *probes[] __initconst = { + "cmdlinepart", NULL + }; - if (mtd_has_cmdlinepart()) { - static const char *probes[] __initconst = - { "cmdlinepart", NULL }; - - mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes, - &mtd_parts, 0); - } - - if (mtd_parts_nb <= 0) { - mtd_parts = pdata->parts; - mtd_parts_nb = pdata->nr_parts; - } + mtd_parts_nb = parse_mtd_partitions(&info->mtd, probes, + &mtd_parts, 0); + } - /* Register any partitions */ - if (mtd_parts_nb > 0) { - ret = add_mtd_partitions(&info->mtd, - mtd_parts, mtd_parts_nb); - if (ret == 0) - info->partitioned = true; - } + if (mtd_parts_nb <= 0) { + mtd_parts = pdata->parts; + mtd_parts_nb = pdata->nr_parts; + } - } else if (pdata->nr_parts) { - dev_warn(&pdev->dev, "ignoring %d default partitions on %s\n", - pdata->nr_parts, info->mtd.name); + /* Register any partitions */ + if (mtd_parts_nb > 0) { + ret = mtd_device_register(&info->mtd, mtd_parts, + mtd_parts_nb); + if (ret == 0) + info->partitioned = true; } /* If there's no partition info, just package the whole chip * as a single MTD device. */ if (!info->partitioned) - ret = add_mtd_device(&info->mtd) ? -ENODEV : 0; + ret = mtd_device_register(&info->mtd, NULL, 0) ? -ENODEV : 0; if (ret < 0) goto err_scan; @@ -824,10 +818,7 @@ static int __exit nand_davinci_remove(struct platform_device *pdev) struct davinci_nand_info *info = platform_get_drvdata(pdev); int status; - if (mtd_has_partitions() && info->partitioned) - status = del_mtd_partitions(&info->mtd); - else - status = del_mtd_device(&info->mtd); + status = mtd_device_unregister(&info->mtd); spin_lock_irq(&davinci_nand_lock); if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME) -- cgit v1.2.3 From 0f47e952fe8b9eb67c24b96e7c48c075657634ba Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:19 +0100 Subject: mtd: diskonchip: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/diskonchip.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index 657b9f4b6f9b..7837728d02ff 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1360,11 +1360,9 @@ static int __init nftl_scan_bbt(struct mtd_info *mtd) At least as nand_bbt.c is currently written. */ if ((ret = nand_scan_bbt(mtd, NULL))) return ret; - add_mtd_device(mtd); -#ifdef CONFIG_MTD_PARTITIONS + mtd_device_register(mtd, NULL, 0); if (!no_autopart) - add_mtd_partitions(mtd, parts, numparts); -#endif + mtd_device_register(mtd, parts, numparts); return 0; } @@ -1419,11 +1417,9 @@ static int __init inftl_scan_bbt(struct mtd_info *mtd) autopartitioning, but I want to give it more thought. */ if (!numparts) return -EIO; - add_mtd_device(mtd); -#ifdef CONFIG_MTD_PARTITIONS + mtd_device_register(mtd, NULL, 0); if (!no_autopart) - add_mtd_partitions(mtd, parts, numparts); -#endif + mtd_device_register(mtd, parts, numparts); return 0; } @@ -1678,9 +1674,9 @@ static int __init doc_probe(unsigned long physadr) /* DBB note: i believe nand_release is necessary here, as buffers may have been allocated in nand_base. Check with Thomas. FIX ME! */ - /* nand_release will call del_mtd_device, but we haven't yet - added it. This is handled without incident by - del_mtd_device, as far as I can tell. */ + /* nand_release will call mtd_device_unregister, but we + haven't yet added it. This is handled without incident by + mtd_device_unregister, as far as I can tell. */ nand_release(mtd); kfree(mtd); goto fail; -- cgit v1.2.3 From da499d414b964403e0070a2b0113b1a4180c6fbe Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:20 +0100 Subject: mtd: edb7312 nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/edb7312.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/mtd/nand/edb7312.c b/drivers/mtd/nand/edb7312.c index 86366bfba9f8..8400d0f6dada 100644 --- a/drivers/mtd/nand/edb7312.c +++ b/drivers/mtd/nand/edb7312.c @@ -55,7 +55,6 @@ static unsigned long ep7312_fio_pbase = EP7312_FIO_PBASE; static void __iomem *ep7312_pxdr = (void __iomem *)EP7312_PXDR; static void __iomem *ep7312_pxddr = (void __iomem *)EP7312_PXDDR; -#ifdef CONFIG_MTD_PARTITIONS /* * Define static partitions for flash device */ @@ -67,8 +66,6 @@ static struct mtd_partition partition_info[] = { #define NUM_PARTITIONS 1 -#endif - /* * hardware specific access to control-lines * @@ -101,9 +98,7 @@ static int ep7312_device_ready(struct mtd_info *mtd) return 1; } -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; -#endif /* * Main initialization routine @@ -162,14 +157,12 @@ static int __init ep7312_init(void) kfree(ep7312_mtd); return -ENXIO; } -#ifdef CONFIG_MTD_PARTITIONS ep7312_mtd->name = "edb7312-nand"; mtd_parts_nb = parse_mtd_partitions(ep7312_mtd, part_probes, &mtd_parts, 0); if (mtd_parts_nb > 0) part_type = "command line"; else mtd_parts_nb = 0; -#endif if (mtd_parts_nb == 0) { mtd_parts = partition_info; mtd_parts_nb = NUM_PARTITIONS; @@ -178,7 +171,7 @@ static int __init ep7312_init(void) /* Register the partitions */ printk(KERN_NOTICE "Using %s partition definition\n", part_type); - add_mtd_partitions(ep7312_mtd, mtd_parts, mtd_parts_nb); + mtd_device_register(ep7312_mtd, mtd_parts, mtd_parts_nb); /* Return happy */ return 0; -- cgit v1.2.3 From ed9281e60af1d63222eff69527e22e382e558887 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:21 +0100 Subject: mtd: fsl_elbc_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsl_elbc_nand.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 537e380b8dcb..0bb254c7d2b1 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -841,12 +841,9 @@ static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev) struct fsl_elbc_mtd *priv; struct resource res; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl; - -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; struct mtd_partition *parts; -#endif int ret; int bank; struct device *dev; @@ -935,26 +932,19 @@ static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev) if (ret) goto err; -#ifdef CONFIG_MTD_PARTITIONS /* First look for RedBoot table or partitions on the command * line, these take precedence over device tree information */ ret = parse_mtd_partitions(&priv->mtd, part_probe_types, &parts, 0); if (ret < 0) goto err; -#ifdef CONFIG_MTD_OF_PARTS if (ret == 0) { ret = of_mtd_parse_partitions(priv->dev, node, &parts); if (ret < 0) goto err; } -#endif - if (ret > 0) - add_mtd_partitions(&priv->mtd, parts, ret); - else -#endif - add_mtd_device(&priv->mtd); + mtd_device_register(&priv->mtd, parts, ret); printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n", (unsigned long long)res.start, priv->bank); -- cgit v1.2.3 From 13c41db94902c4ff62b24dc911bc8d4d75eb17f5 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:22 +0100 Subject: mtd: fsl_upm: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsl_upm.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 073ee026a17c..23752fd5bc59 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -33,10 +33,7 @@ struct fsl_upm_nand { struct mtd_info mtd; struct nand_chip chip; int last_ctrl; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts; -#endif - struct fsl_upm upm; uint8_t upm_addr_offset; uint8_t upm_cmd_offset; @@ -161,9 +158,7 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun, { int ret; struct device_node *flash_np; -#ifdef CONFIG_MTD_PARTITIONS static const char *part_types[] = { "cmdlinepart", NULL, }; -#endif fun->chip.IO_ADDR_R = fun->io_base; fun->chip.IO_ADDR_W = fun->io_base; @@ -197,7 +192,6 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun, if (ret) goto err; -#ifdef CONFIG_MTD_PARTITIONS ret = parse_mtd_partitions(&fun->mtd, part_types, &fun->parts, 0); #ifdef CONFIG_MTD_OF_PARTS @@ -207,11 +201,7 @@ static int __devinit fun_chip_init(struct fsl_upm_nand *fun, goto err; } #endif - if (ret > 0) - ret = add_mtd_partitions(&fun->mtd, fun->parts, ret); - else -#endif - ret = add_mtd_device(&fun->mtd); + ret = mtd_device_register(&fun->mtd, fun->parts, ret); err: of_node_put(flash_np); return ret; -- cgit v1.2.3 From 99335d0002439b92917512dd8baeff60f774809f Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:23 +0100 Subject: mtd: fsmc_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/fsmc_nand.c | 25 ++++--------------------- 1 file changed, 4 insertions(+), 21 deletions(-) diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c index 0d45ef3883e8..e9b275ac381c 100644 --- a/drivers/mtd/nand/fsmc_nand.c +++ b/drivers/mtd/nand/fsmc_nand.c @@ -120,8 +120,6 @@ static struct fsmc_eccplace fsmc_ecc4_sp_place = { } }; - -#ifdef CONFIG_MTD_PARTITIONS /* * Default partition tables to be used if the partition information not * provided through platform data. @@ -182,7 +180,6 @@ static struct mtd_partition partition_info_128KB_blk[] = { #ifdef CONFIG_MTD_CMDLINE_PARTS const char *part_probes[] = { "cmdlinepart", NULL }; #endif -#endif /** * struct fsmc_nand_data - structure for FSMC NAND device state @@ -719,7 +716,6 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) * platform data, * default partition information present in driver. */ -#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_CMDLINE_PARTS /* * Check if partition info passed via command line @@ -777,19 +773,10 @@ static int __init fsmc_nand_probe(struct platform_device *pdev) } #endif - if (host->partitions) { - ret = add_mtd_partitions(&host->mtd, host->partitions, - host->nr_partitions); - if (ret) - goto err_probe; - } -#else - dev_info(&pdev->dev, "Registering %s as whole device\n", mtd->name); - if (!add_mtd_device(mtd)) { - ret = -ENXIO; + ret = mtd_device_register(&host->mtd, host->partitions, + host->nr_partitions); + if (ret) goto err_probe; - } -#endif platform_set_drvdata(pdev, host); dev_info(&pdev->dev, "FSMC NAND driver registration successful\n"); @@ -835,11 +822,7 @@ static int fsmc_nand_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); if (host) { -#ifdef CONFIG_MTD_PARTITIONS - del_mtd_partitions(&host->mtd); -#else - del_mtd_device(&host->mtd); -#endif + mtd_device_unregister(&host->mtd); clk_disable(host->clk); clk_put(host->clk); -- cgit v1.2.3 From c4a5522020ab3842880359aaae4464f08dcc74d5 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:24 +0100 Subject: mtd: h1910: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/Kconfig | 2 +- drivers/mtd/nand/h1910.c | 5 +---- 2 files changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index edec457d361d..333d23122226 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -92,7 +92,7 @@ config MTD_NAND_EDB7312 config MTD_NAND_H1900 tristate "iPAQ H1900 flash" - depends on ARCH_PXA && MTD_PARTITIONS + depends on ARCH_PXA help This enables the driver for the iPAQ h1900 flash. diff --git a/drivers/mtd/nand/h1910.c b/drivers/mtd/nand/h1910.c index f8ce79b446ed..02a03e67109c 100644 --- a/drivers/mtd/nand/h1910.c +++ b/drivers/mtd/nand/h1910.c @@ -38,7 +38,6 @@ static struct mtd_info *h1910_nand_mtd = NULL; * Module stuff */ -#ifdef CONFIG_MTD_PARTITIONS /* * Define static partitions for flash device */ @@ -50,8 +49,6 @@ static struct mtd_partition partition_info[] = { #define NUM_PARTITIONS 1 -#endif - /* * hardware specific access to control-lines * @@ -154,7 +151,7 @@ static int __init h1910_init(void) /* Register the partitions */ printk(KERN_NOTICE "Using %s partition definition\n", part_type); - add_mtd_partitions(h1910_nand_mtd, mtd_parts, mtd_parts_nb); + mtd_device_register(h1910_nand_mtd, mtd_parts, mtd_parts_nb); /* Return happy */ return 0; -- cgit v1.2.3 From 85358b2aa951ad096af444765baf1e275e8a0749 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:25 +0100 Subject: mtd: jz4740_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/jz4740_nand.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index cea38a5d4ac5..6e813daed068 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -299,10 +299,8 @@ static int __devinit jz_nand_probe(struct platform_device *pdev) struct nand_chip *chip; struct mtd_info *mtd; struct jz_nand_platform_data *pdata = pdev->dev.platform_data; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *partition_info; int num_partitions = 0; -#endif nand = kzalloc(sizeof(*nand), GFP_KERNEL); if (!nand) { @@ -375,7 +373,6 @@ static int __devinit jz_nand_probe(struct platform_device *pdev) goto err_gpio_free; } -#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_CMDLINE_PARTS num_partitions = parse_mtd_partitions(mtd, part_probes, &partition_info, 0); @@ -384,12 +381,7 @@ static int __devinit jz_nand_probe(struct platform_device *pdev) num_partitions = pdata->num_partitions; partition_info = pdata->partitions; } - - if (num_partitions > 0) - ret = add_mtd_partitions(mtd, partition_info, num_partitions); - else -#endif - ret = add_mtd_device(mtd); + ret = mtd_device_register(mtd, partition_info, num_partitions); if (ret) { dev_err(&pdev->dev, "Failed to add mtd device\n"); -- cgit v1.2.3 From 248f56d3870c03a031755a403f942028c68d39e2 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:26 +0100 Subject: mtd: mpc5121_nfc: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/mpc5121_nfc.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 0b81b5b499d1..2f7c930872f9 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -131,9 +131,7 @@ struct mpc5121_nfc_prv { static void mpc5121_nfc_done(struct mtd_info *mtd); -#ifdef CONFIG_MTD_PARTITIONS static const char *mpc5121_nfc_pprobes[] = { "cmdlinepart", NULL }; -#endif /* Read NFC register */ static inline u16 nfc_read(struct mtd_info *mtd, uint reg) @@ -658,9 +656,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op) struct mpc5121_nfc_prv *prv; struct resource res; struct mtd_info *mtd; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts; -#endif struct nand_chip *chip; unsigned long regs_paddr, regs_size; const __be32 *chips_no; @@ -841,7 +837,6 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op) dev_set_drvdata(dev, mtd); /* Register device in MTD */ -#ifdef CONFIG_MTD_PARTITIONS retval = parse_mtd_partitions(mtd, mpc5121_nfc_pprobes, &parts, 0); #ifdef CONFIG_MTD_OF_PARTS if (retval == 0) @@ -854,12 +849,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op) goto error; } - if (retval > 0) - retval = add_mtd_partitions(mtd, parts, retval); - else -#endif - retval = add_mtd_device(mtd); - + retval = mtd_device_register(mtd, parts, retval); if (retval) { dev_err(dev, "Error adding MTD device!\n"); devm_free_irq(dev, prv->irq, mtd); -- cgit v1.2.3 From 759f1d325c381470a48c666eb2430af4834ef3ee Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:27 +0100 Subject: mtd: mxc_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/mxc_nand.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index b4efdb704ed2..90df34c4d26c 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -243,9 +243,7 @@ static struct nand_ecclayout nandv2_hw_eccoob_4k = { } }; -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "RedBoot", "cmdlinepart", NULL }; -#endif static irqreturn_t mxc_nfc_irq(int irq, void *dev_id) { @@ -1233,18 +1231,15 @@ static int __init mxcnd_probe(struct platform_device *pdev) } /* Register the partitions */ -#ifdef CONFIG_MTD_PARTITIONS nr_parts = parse_mtd_partitions(mtd, part_probes, &host->parts, 0); if (nr_parts > 0) - add_mtd_partitions(mtd, host->parts, nr_parts); + mtd_device_register(mtd, host->parts, nr_parts); else if (pdata->parts) - add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts); - else -#endif - { + mtd_device_register(mtd, pdata->parts, pdata->nr_parts); + else { pr_info("Registering %s as whole device\n", mtd->name); - add_mtd_device(mtd); + mtd_device_register(mtd, NULL, 0); } platform_set_drvdata(pdev, host); -- cgit v1.2.3 From 1f3a7c626f7e55657255df89fab418714502093a Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:28 +0100 Subject: mtd: ndfc: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/ndfc.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 7ba65553d6ad..ea2dea8a9c88 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -42,9 +42,7 @@ struct ndfc_controller { struct nand_chip chip; int chip_select; struct nand_hw_control ndfc_control; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts; -#endif }; static struct ndfc_controller ndfc_ctrl[NDFC_MAX_CS]; @@ -161,12 +159,10 @@ static int ndfc_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) static int ndfc_chip_init(struct ndfc_controller *ndfc, struct device_node *node) { -#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_CMDLINE_PARTS static const char *part_types[] = { "cmdlinepart", NULL }; #else static const char *part_types[] = { NULL }; -#endif #endif struct device_node *flash_np; struct nand_chip *chip = &ndfc->chip; @@ -208,25 +204,18 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc, if (ret) goto err; -#ifdef CONFIG_MTD_PARTITIONS ret = parse_mtd_partitions(&ndfc->mtd, part_types, &ndfc->parts, 0); if (ret < 0) goto err; -#ifdef CONFIG_MTD_OF_PARTS if (ret == 0) { ret = of_mtd_parse_partitions(&ndfc->ofdev->dev, flash_np, &ndfc->parts); if (ret < 0) goto err; } -#endif - if (ret > 0) - ret = add_mtd_partitions(&ndfc->mtd, ndfc->parts, ret); - else -#endif - ret = add_mtd_device(&ndfc->mtd); + ret = mtd_device_register(&ndfc->mtd, ndfc->parts, ret); err: of_node_put(flash_np); -- cgit v1.2.3 From a04d23dfea631993bcb256c638e379c002af9e4f Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:29 +0100 Subject: mtd: nomadik_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nomadik_nand.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c index a045a4a581b6..b6a5c86ab31e 100644 --- a/drivers/mtd/nand/nomadik_nand.c +++ b/drivers/mtd/nand/nomadik_nand.c @@ -158,12 +158,7 @@ static int nomadik_nand_probe(struct platform_device *pdev) goto err_unmap; } -#ifdef CONFIG_MTD_PARTITIONS - add_mtd_partitions(&host->mtd, pdata->parts, pdata->nparts); -#else - pr_info("Registering %s as whole device\n", mtd->name); - add_mtd_device(mtd); -#endif + mtd_device_register(&host->mtd, pdata->parts, pdata->nparts); platform_set_drvdata(pdev, host); return 0; -- cgit v1.2.3 From 54e07f5482cf76e87f1f56f709f279b164a620a5 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:30 +0100 Subject: mtd: omap2: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/omap2.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index 39f46a0cf34e..0db2c0e7656a 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -94,9 +94,7 @@ #define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0) #define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1) -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "cmdlinepart", NULL }; -#endif /* oob info generated runtime depending on ecc algorithm and layout selected */ static struct nand_ecclayout omap_oobinfo; @@ -1105,15 +1103,13 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } -#ifdef CONFIG_MTD_PARTITIONS err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); if (err > 0) - add_mtd_partitions(&info->mtd, info->parts, err); + mtd_device_register(&info->mtd, info->parts, err); else if (pdata->parts) - add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); + mtd_device_register(&info->mtd, pdata->parts, pdata->nr_parts); else -#endif - add_mtd_device(&info->mtd); + mtd_device_register(&info->mtd, NULL, 0); platform_set_drvdata(pdev, &info->mtd); -- cgit v1.2.3 From 55c0689c08cfd0c596245d64c116794c9ee06a74 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:31 +0100 Subject: mtd: orion_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/orion_nand.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index da6e75343052..7794d0680f91 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -21,9 +21,7 @@ #include #include -#ifdef CONFIG_MTD_CMDLINE_PARTS static const char *part_probes[] = { "cmdlinepart", NULL }; -#endif static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { @@ -83,10 +81,8 @@ static int __init orion_nand_probe(struct platform_device *pdev) struct resource *res; void __iomem *io_base; int ret = 0; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *partitions = NULL; int num_part = 0; -#endif nc = kzalloc(sizeof(struct nand_chip) + sizeof(struct mtd_info), GFP_KERNEL); if (!nc) { @@ -136,7 +132,6 @@ static int __init orion_nand_probe(struct platform_device *pdev) goto no_dev; } -#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_CMDLINE_PARTS mtd->name = "orion_nand"; num_part = parse_mtd_partitions(mtd, part_probes, &partitions, 0); @@ -147,14 +142,7 @@ static int __init orion_nand_probe(struct platform_device *pdev) partitions = board->parts; } - if (partitions && num_part > 0) - ret = add_mtd_partitions(mtd, partitions, num_part); - else - ret = add_mtd_device(mtd); -#else - ret = add_mtd_device(mtd); -#endif - + ret = mtd_device_register(mtd, partitions, num_part); if (ret) { nand_release(mtd); goto no_dev; -- cgit v1.2.3 From acd4134ac9706d9a7ea1c1babee9a313a8e9cac6 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:32 +0100 Subject: mtd: ppchameleonevb: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/ppchameleonevb.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/nand/ppchameleonevb.c b/drivers/mtd/nand/ppchameleonevb.c index cc8658431851..3bbb796b451c 100644 --- a/drivers/mtd/nand/ppchameleonevb.c +++ b/drivers/mtd/nand/ppchameleonevb.c @@ -73,7 +73,6 @@ __setup("ppchameleon_fio_pbase=", ppchameleon_fio_pbase); __setup("ppchameleonevb_fio_pbase=", ppchameleonevb_fio_pbase); #endif -#ifdef CONFIG_MTD_PARTITIONS /* * Define static partitions for flash devices */ @@ -101,7 +100,6 @@ static struct mtd_partition partition_info_evb[] = { #define NUM_PARTITIONS 1 extern int parse_cmdline_partitions(struct mtd_info *master, struct mtd_partition **pparts, const char *mtd_id); -#endif /* * hardware specific access to control-lines @@ -189,10 +187,8 @@ static int ppchameleonevb_device_ready(struct mtd_info *minfo) } #endif -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; const char *part_probes_evb[] = { "cmdlinepart", NULL }; -#endif /* * Main initialization routine @@ -284,14 +280,13 @@ static int __init ppchameleonevb_init(void) this->chip_delay = NAND_SMALL_DELAY_US; #endif -#ifdef CONFIG_MTD_PARTITIONS ppchameleon_mtd->name = "ppchameleon-nand"; mtd_parts_nb = parse_mtd_partitions(ppchameleon_mtd, part_probes, &mtd_parts, 0); if (mtd_parts_nb > 0) part_type = "command line"; else mtd_parts_nb = 0; -#endif + if (mtd_parts_nb == 0) { if (ppchameleon_mtd->size == NAND_SMALL_SIZE) mtd_parts = partition_info_me; @@ -303,7 +298,7 @@ static int __init ppchameleonevb_init(void) /* Register the partitions */ printk(KERN_NOTICE "Using %s partition definition\n", part_type); - add_mtd_partitions(ppchameleon_mtd, mtd_parts, mtd_parts_nb); + mtd_device_register(ppchameleon_mtd, mtd_parts, mtd_parts_nb); nand_evb_init: /**************************** @@ -385,14 +380,14 @@ static int __init ppchameleonevb_init(void) iounmap(ppchameleon_fio_base); return -ENXIO; } -#ifdef CONFIG_MTD_PARTITIONS + ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME; mtd_parts_nb = parse_mtd_partitions(ppchameleonevb_mtd, part_probes_evb, &mtd_parts, 0); if (mtd_parts_nb > 0) part_type = "command line"; else mtd_parts_nb = 0; -#endif + if (mtd_parts_nb == 0) { mtd_parts = partition_info_evb; mtd_parts_nb = NUM_PARTITIONS; @@ -401,7 +396,7 @@ static int __init ppchameleonevb_init(void) /* Register the partitions */ printk(KERN_NOTICE "Using %s partition definition\n", part_type); - add_mtd_partitions(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb); + mtd_device_register(ppchameleonevb_mtd, mtd_parts, mtd_parts_nb); /* Return happy */ return 0; -- cgit v1.2.3 From af86ea8fa3df5516175ec948875f6e742e82c1ad Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:33 +0100 Subject: mtd: s3c2410 nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Ben Dooks Cc: Kukjin Kim Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/s3c2410.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index cea775aa9482..4405468f196b 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -744,7 +744,6 @@ static int s3c24xx_nand_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, struct s3c2410_nand_mtd *mtd, @@ -754,7 +753,7 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, int nr_part = 0; if (set == NULL) - return add_mtd_device(&mtd->mtd); + return mtd_device_register(&mtd->mtd, NULL, 0); mtd->mtd.name = set->name; nr_part = parse_mtd_partitions(&mtd->mtd, part_probes, &part_info, 0); @@ -764,19 +763,8 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, part_info = set->partitions; } - if (nr_part > 0 && part_info) - return add_mtd_partitions(&mtd->mtd, part_info, nr_part); - - return add_mtd_device(&mtd->mtd); -} -#else -static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, - struct s3c2410_nand_mtd *mtd, - struct s3c2410_nand_set *set) -{ - return add_mtd_device(&mtd->mtd); + return mtd_device_register(&mtd->mtd, part_info, nr_part); } -#endif /** * s3c2410_nand_init_chip - initialise a single instance of an chip -- cgit v1.2.3 From 6baed700f21c9b200e344518932a7046b05853a4 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:34 +0100 Subject: mtd: sharpsl: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/sharpsl.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c index 54ec7542a7b7..19e24ed089ea 100644 --- a/drivers/mtd/nand/sharpsl.c +++ b/drivers/mtd/nand/sharpsl.c @@ -103,9 +103,7 @@ static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, return readb(sharpsl->io + ECCCNTR) != 0; } -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "cmdlinepart", NULL }; -#endif /* * Main initialization routine @@ -113,10 +111,8 @@ static const char *part_probes[] = { "cmdlinepart", NULL }; static int __devinit sharpsl_nand_probe(struct platform_device *pdev) { struct nand_chip *this; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *sharpsl_partition_info; int nr_partitions; -#endif struct resource *r; int err = 0; struct sharpsl_nand *sharpsl; @@ -188,18 +184,14 @@ static int __devinit sharpsl_nand_probe(struct platform_device *pdev) /* Register the partitions */ sharpsl->mtd.name = "sharpsl-nand"; -#ifdef CONFIG_MTD_PARTITIONS nr_partitions = parse_mtd_partitions(&sharpsl->mtd, part_probes, &sharpsl_partition_info, 0); if (nr_partitions <= 0) { nr_partitions = data->nr_partitions; sharpsl_partition_info = data->partitions; } - if (nr_partitions > 0) - err = add_mtd_partitions(&sharpsl->mtd, sharpsl_partition_info, nr_partitions); - else -#endif - err = add_mtd_device(&sharpsl->mtd); + err = mtd_device_register(&sharpsl->mtd, sharpsl_partition_info, + nr_partitions); if (err) goto err_add; -- cgit v1.2.3 From 5667bc8a5b1ef152cebaf8004026ff6825949116 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:35 +0100 Subject: mtd: socrates_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/socrates_nand.c | 16 +--------------- 1 file changed, 1 insertion(+), 15 deletions(-) diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c index a853548986f0..ca2d0555729e 100644 --- a/drivers/mtd/nand/socrates_nand.c +++ b/drivers/mtd/nand/socrates_nand.c @@ -155,9 +155,7 @@ static int socrates_nand_device_ready(struct mtd_info *mtd) return 1; } -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "cmdlinepart", NULL }; -#endif /* * Probe for the NAND device. @@ -168,11 +166,8 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev) struct mtd_info *mtd; struct nand_chip *nand_chip; int res; - -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *partitions = NULL; int num_partitions = 0; -#endif /* Allocate memory for the device structure (and zero it) */ host = kzalloc(sizeof(struct socrates_nand_host), GFP_KERNEL); @@ -230,7 +225,6 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev) goto out; } -#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_CMDLINE_PARTS num_partitions = parse_mtd_partitions(mtd, part_probes, &partitions, 0); @@ -240,7 +234,6 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev) } #endif -#ifdef CONFIG_MTD_OF_PARTS if (num_partitions == 0) { num_partitions = of_mtd_parse_partitions(&ofdev->dev, ofdev->dev.of_node, @@ -250,19 +243,12 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev) goto release; } } -#endif - if (partitions && (num_partitions > 0)) - res = add_mtd_partitions(mtd, partitions, num_partitions); - else -#endif - res = add_mtd_device(mtd); + res = mtd_device_register(mtd, partitions, num_partitions); if (!res) return res; -#ifdef CONFIG_MTD_PARTITIONS release: -#endif nand_release(mtd); out: -- cgit v1.2.3 From d1e084e6637fa23de92e4ffb04c99b10daefa6e9 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:36 +0100 Subject: mtd: tmio_nand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/tmio_nand.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index 14c578707824..37cce8d75dcc 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -381,10 +381,8 @@ static int tmio_probe(struct platform_device *dev) struct tmio_nand *tmio; struct mtd_info *mtd; struct nand_chip *nand_chip; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts; int nbparts = 0; -#endif int retval; if (data == NULL) @@ -463,7 +461,6 @@ static int tmio_probe(struct platform_device *dev) goto err_scan; } /* Register the partitions */ -#ifdef CONFIG_MTD_PARTITIONS #ifdef CONFIG_MTD_CMDLINE_PARTS nbparts = parse_mtd_partitions(mtd, part_probes, &parts, 0); #endif @@ -472,12 +469,7 @@ static int tmio_probe(struct platform_device *dev) nbparts = data->num_partitions; } - if (nbparts) - retval = add_mtd_partitions(mtd, parts, nbparts); - else -#endif - retval = add_mtd_device(mtd); - + retval = mtd_device_register(mtd, parts, nbparts); if (!retval) return retval; -- cgit v1.2.3 From c52840f878d373677fa98223e2204d17a30fbfd5 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:37 +0100 Subject: mtd: txx9ndfmc: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/txx9ndfmc.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index ca270a4881a4..bfba4e39a6c5 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -74,9 +74,7 @@ struct txx9ndfmc_drvdata { unsigned char hold; /* in gbusclock */ unsigned char spw; /* in gbusclock */ struct nand_hw_control hw_control; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts[MAX_TXX9NDFMC_DEV]; -#endif }; static struct platform_device *mtd_to_platdev(struct mtd_info *mtd) @@ -289,9 +287,7 @@ static int txx9ndfmc_nand_scan(struct mtd_info *mtd) static int __init txx9ndfmc_probe(struct platform_device *dev) { struct txx9ndfmc_platform_data *plat = dev->dev.platform_data; -#ifdef CONFIG_MTD_PARTITIONS static const char *probes[] = { "cmdlinepart", NULL }; -#endif int hold, spw; int i; struct txx9ndfmc_drvdata *drvdata; @@ -337,9 +333,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) struct txx9ndfmc_priv *txx9_priv; struct nand_chip *chip; struct mtd_info *mtd; -#ifdef CONFIG_MTD_PARTITIONS int nr_parts; -#endif if (!(plat->ch_mask & (1 << i))) continue; @@ -399,13 +393,9 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) } mtd->name = txx9_priv->mtdname; -#ifdef CONFIG_MTD_PARTITIONS nr_parts = parse_mtd_partitions(mtd, probes, &drvdata->parts[i], 0); - if (nr_parts > 0) - add_mtd_partitions(mtd, drvdata->parts[i], nr_parts); -#endif - add_mtd_device(mtd); + mtd_device_register(mtd, drvdata->parts[i], nr_parts); drvdata->mtds[i] = mtd; } @@ -431,9 +421,7 @@ static int __exit txx9ndfmc_remove(struct platform_device *dev) txx9_priv = chip->priv; nand_release(mtd); -#ifdef CONFIG_MTD_PARTITIONS kfree(drvdata->parts[i]); -#endif kfree(txx9_priv->mtdname); kfree(txx9_priv); } -- cgit v1.2.3 From ff6e1b26d510b1d3459665c66026977c9e0569b8 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:38 +0100 Subject: mtd: omap2 onenand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Kyungmin Park Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/omap2.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 1fcb41adab07..a916dec29215 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -67,9 +67,7 @@ struct omap2_onenand { struct regulator *regulator; }; -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "cmdlinepart", NULL, }; -#endif static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data) { @@ -755,15 +753,13 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) if ((r = onenand_scan(&c->mtd, 1)) < 0) goto err_release_regulator; -#ifdef CONFIG_MTD_PARTITIONS r = parse_mtd_partitions(&c->mtd, part_probes, &c->parts, 0); if (r > 0) - r = add_mtd_partitions(&c->mtd, c->parts, r); + r = mtd_device_register(&c->mtd, c->parts, r); else if (pdata->parts != NULL) - r = add_mtd_partitions(&c->mtd, pdata->parts, pdata->nr_parts); + r = mtd_device_register(&c->mtd, pdata->parts, pdata->nr_parts); else -#endif - r = add_mtd_device(&c->mtd); + r = mtd_device_register(&c->mtd, NULL, 0); if (r) goto err_release_onenand; -- cgit v1.2.3 From 6b57c11601c8fa4bfa046513c4df155b3b58ea89 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:39 +0100 Subject: mtd: samsung onenand: convert to mtd_device_register() Convert to mtd_device_register() and remove the CONFIG_MTD_PARTITIONS preprocessor conditionals as partitioning is always available. Cc: Kyungmin Park Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/onenand/samsung.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/onenand/samsung.c b/drivers/mtd/onenand/samsung.c index a4c74a9ba430..3306b5b3c736 100644 --- a/drivers/mtd/onenand/samsung.c +++ b/drivers/mtd/onenand/samsung.c @@ -147,9 +147,7 @@ struct s3c_onenand { struct resource *dma_res; unsigned long phys_base; struct completion complete; -#ifdef CONFIG_MTD_PARTITIONS struct mtd_partition *parts; -#endif }; #define CMD_MAP_00(dev, addr) (dev->cmd_map(MAP_00, ((addr) << 1))) @@ -159,9 +157,7 @@ struct s3c_onenand { static struct s3c_onenand *onenand; -#ifdef CONFIG_MTD_PARTITIONS static const char *part_probes[] = { "cmdlinepart", NULL, }; -#endif static inline int s3c_read_reg(int offset) { @@ -1021,15 +1017,13 @@ static int s3c_onenand_probe(struct platform_device *pdev) if (s3c_read_reg(MEM_CFG_OFFSET) & ONENAND_SYS_CFG1_SYNC_READ) dev_info(&onenand->pdev->dev, "OneNAND Sync. Burst Read enabled\n"); -#ifdef CONFIG_MTD_PARTITIONS err = parse_mtd_partitions(mtd, part_probes, &onenand->parts, 0); if (err > 0) - add_mtd_partitions(mtd, onenand->parts, err); + mtd_device_register(mtd, onenand->parts, err); else if (err <= 0 && pdata && pdata->parts) - add_mtd_partitions(mtd, pdata->parts, pdata->nr_parts); + mtd_device_register(mtd, pdata->parts, pdata->nr_parts); else -#endif - err = add_mtd_device(mtd); + err = mtd_device_register(mtd, NULL, 0); platform_set_drvdata(pdev, mtd); -- cgit v1.2.3 From ee0e87b174bb41f0310cf089262bf5dd8f95a212 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:40 +0100 Subject: mtd: convert remaining users to mtd_device_register() The older add_mtd_device()/add_mtd_partitions() and their removal counterparts will soon be gone. Replace uses with mtd_device_register() and mtd_device_unregister(). Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/devices/block2mtd.c | 4 ++-- drivers/mtd/devices/doc2000.c | 4 ++-- drivers/mtd/devices/doc2001.c | 4 ++-- drivers/mtd/devices/doc2001plus.c | 4 ++-- drivers/mtd/devices/lart.c | 9 +++++---- drivers/mtd/devices/ms02-nv.c | 4 ++-- drivers/mtd/devices/mtdram.c | 5 ++--- drivers/mtd/devices/phram.c | 4 ++-- drivers/mtd/devices/pmc551.c | 6 +++--- drivers/mtd/devices/slram.c | 4 ++-- drivers/mtd/maps/amd76xrom.c | 4 ++-- drivers/mtd/maps/autcpu12-nvram.c | 4 ++-- drivers/mtd/maps/bcm963xx-flash.c | 6 +++--- drivers/mtd/maps/cdb89712.c | 12 ++++++------ drivers/mtd/maps/ceiva.c | 6 +++--- drivers/mtd/maps/cfi_flagadm.c | 4 ++-- drivers/mtd/maps/ck804xrom.c | 4 ++-- drivers/mtd/maps/dbox2-flash.c | 4 ++-- drivers/mtd/maps/dilnetpc.c | 9 +++++---- drivers/mtd/maps/dmv182.c | 4 ++-- drivers/mtd/maps/esb2rom.c | 4 ++-- drivers/mtd/maps/fortunet.c | 7 ++++--- drivers/mtd/maps/ichxrom.c | 4 ++-- drivers/mtd/maps/integrator-flash.c | 6 +++--- drivers/mtd/maps/l440gx.c | 4 ++-- drivers/mtd/maps/mbx860.c | 6 +++--- drivers/mtd/maps/netsc520.c | 4 ++-- drivers/mtd/maps/nettel.c | 12 ++++++------ drivers/mtd/maps/octagon-5066.c | 4 ++-- drivers/mtd/maps/pci.c | 4 ++-- drivers/mtd/maps/pcmciamtd.c | 4 ++-- drivers/mtd/maps/pmcmsp-flash.c | 6 +++--- drivers/mtd/maps/rpxlite.c | 4 ++-- drivers/mtd/maps/sbc_gxx.c | 4 ++-- drivers/mtd/maps/sc520cdp.c | 8 ++++---- drivers/mtd/maps/scb2_flash.c | 6 +++--- drivers/mtd/maps/solutionengine.c | 12 ++++++------ drivers/mtd/maps/sun_uflash.c | 4 ++-- drivers/mtd/maps/ts5500_flash.c | 4 ++-- drivers/mtd/maps/tsunami_flash.c | 4 ++-- drivers/mtd/maps/vmax301.c | 4 ++-- drivers/mtd/maps/vmu-flash.c | 4 ++-- drivers/mtd/maps/wr_sbc82xx_flash.c | 15 +++++++++------ drivers/mtd/nand/alauda.c | 4 ++-- drivers/mtd/nand/ams-delta.c | 4 ++-- drivers/mtd/nand/au1550nd.c | 3 ++- drivers/mtd/nand/autcpu12.c | 16 ++++++++-------- drivers/mtd/nand/cmx270_nand.c | 2 +- drivers/mtd/nand/denali.c | 4 ++-- drivers/mtd/nand/gpio.c | 4 ++-- drivers/mtd/nand/nandsim.c | 4 +++- drivers/mtd/nand/nuc900_nand.c | 4 ++-- drivers/mtd/nand/pasemi_nand.c | 2 +- drivers/mtd/nand/rtc_from4.c | 3 ++- drivers/mtd/nand/sh_flctl.c | 2 +- drivers/mtd/nand/sm_common.c | 2 +- drivers/mtd/nand/spia.c | 2 +- drivers/mtd/onenand/onenand_sim.c | 3 ++- drivers/mtd/ubi/gluebi.c | 6 +++--- drivers/net/sfc/mtd.c | 6 +++--- 60 files changed, 160 insertions(+), 150 deletions(-) diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c index 97183c8c9e33..b78f23169d4e 100644 --- a/drivers/mtd/devices/block2mtd.c +++ b/drivers/mtd/devices/block2mtd.c @@ -294,7 +294,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size) dev->mtd.priv = dev; dev->mtd.owner = THIS_MODULE; - if (add_mtd_device(&dev->mtd)) { + if (mtd_device_register(&dev->mtd, NULL, 0)) { /* Device didn't get added, so free the entry */ goto devinit_err; } @@ -465,7 +465,7 @@ static void __devexit block2mtd_exit(void) list_for_each_safe(pos, next, &blkmtd_device_list) { struct block2mtd_dev *dev = list_entry(pos, typeof(*dev), list); block2mtd_sync(&dev->mtd); - del_mtd_device(&dev->mtd); + mtd_device_unregister(&dev->mtd); INFO("mtd%d: [%s] removed", dev->mtd.index, dev->mtd.name + strlen("block2mtd: ")); list_del(&dev->list); diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c index 5bf5f460e132..f7fbf6025ef2 100644 --- a/drivers/mtd/devices/doc2000.c +++ b/drivers/mtd/devices/doc2000.c @@ -597,7 +597,7 @@ void DoC2k_init(struct mtd_info *mtd) doc2klist = mtd; mtd->size = this->totlen; mtd->erasesize = this->erasesize; - add_mtd_device(mtd); + mtd_device_register(mtd, NULL, 0); return; } } @@ -1185,7 +1185,7 @@ static void __exit cleanup_doc2000(void) this = mtd->priv; doc2klist = this->nextdoc; - del_mtd_device(mtd); + mtd_device_unregister(mtd); iounmap(this->virtadr); kfree(this->chips); diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c index 0990f7803628..241192f05bc8 100644 --- a/drivers/mtd/devices/doc2001.c +++ b/drivers/mtd/devices/doc2001.c @@ -376,7 +376,7 @@ void DoCMil_init(struct mtd_info *mtd) this->nextdoc = docmillist; docmillist = mtd; mtd->size = this->totlen; - add_mtd_device(mtd); + mtd_device_register(mtd, NULL, 0); return; } } @@ -826,7 +826,7 @@ static void __exit cleanup_doc2001(void) this = mtd->priv; docmillist = this->nextdoc; - del_mtd_device(mtd); + mtd_device_unregister(mtd); iounmap(this->virtadr); kfree(this->chips); diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c index 8b36fa77a195..09ae0adc3ad0 100644 --- a/drivers/mtd/devices/doc2001plus.c +++ b/drivers/mtd/devices/doc2001plus.c @@ -499,7 +499,7 @@ void DoCMilPlus_init(struct mtd_info *mtd) docmilpluslist = mtd; mtd->size = this->totlen; mtd->erasesize = this->erasesize; - add_mtd_device(mtd); + mtd_device_register(mtd, NULL, 0); return; } } @@ -1091,7 +1091,7 @@ static void __exit cleanup_doc2001plus(void) this = mtd->priv; docmilpluslist = this->nextdoc; - del_mtd_device(mtd); + mtd_device_unregister(mtd); iounmap(this->virtadr); kfree(this->chips); diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index 4b829f97d56c..772a0ff89e0f 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -684,9 +684,10 @@ static int __init lart_flash_init (void) #endif #ifndef HAVE_PARTITIONS - result = add_mtd_device (&mtd); + result = mtd_device_register(&mtd, NULL, 0); #else - result = add_mtd_partitions (&mtd,lart_partitions, ARRAY_SIZE(lart_partitions)); + result = mtd_device_register(&mtd, lart_partitions, + ARRAY_SIZE(lart_partitions)); #endif return (result); @@ -695,9 +696,9 @@ static int __init lart_flash_init (void) static void __exit lart_flash_exit (void) { #ifndef HAVE_PARTITIONS - del_mtd_device (&mtd); + mtd_device_unregister(&mtd); #else - del_mtd_partitions (&mtd); + mtd_device_unregister(&mtd); #endif } diff --git a/drivers/mtd/devices/ms02-nv.c b/drivers/mtd/devices/ms02-nv.c index 6a9a24a80a6d..8423fb6d4f26 100644 --- a/drivers/mtd/devices/ms02-nv.c +++ b/drivers/mtd/devices/ms02-nv.c @@ -220,7 +220,7 @@ static int __init ms02nv_init_one(ulong addr) mtd->writesize = 1; ret = -EIO; - if (add_mtd_device(mtd)) { + if (mtd_device_register(mtd, NULL, 0)) { printk(KERN_ERR "ms02-nv: Unable to register MTD device, aborting!\n"); goto err_out_csr_res; @@ -262,7 +262,7 @@ static void __exit ms02nv_remove_one(void) root_ms02nv_mtd = mp->next; - del_mtd_device(mtd); + mtd_device_unregister(mtd); release_resource(mp->resource.csr); kfree(mp->resource.csr); diff --git a/drivers/mtd/devices/mtdram.c b/drivers/mtd/devices/mtdram.c index 1483e18971ce..2562689ba6b4 100644 --- a/drivers/mtd/devices/mtdram.c +++ b/drivers/mtd/devices/mtdram.c @@ -104,7 +104,7 @@ static int ram_write(struct mtd_info *mtd, loff_t to, size_t len, static void __exit cleanup_mtdram(void) { if (mtd_info) { - del_mtd_device(mtd_info); + mtd_device_unregister(mtd_info); vfree(mtd_info->priv); kfree(mtd_info); } @@ -133,9 +133,8 @@ int mtdram_init_device(struct mtd_info *mtd, void *mapped_address, mtd->read = ram_read; mtd->write = ram_write; - if (add_mtd_device(mtd)) { + if (mtd_device_register(mtd, NULL, 0)) return -EIO; - } return 0; } diff --git a/drivers/mtd/devices/phram.c b/drivers/mtd/devices/phram.c index 8d28fa02a5a2..23423bd00b06 100644 --- a/drivers/mtd/devices/phram.c +++ b/drivers/mtd/devices/phram.c @@ -115,7 +115,7 @@ static void unregister_devices(void) struct phram_mtd_list *this, *safe; list_for_each_entry_safe(this, safe, &phram_list, list) { - del_mtd_device(&this->mtd); + mtd_device_unregister(&this->mtd); iounmap(this->mtd.priv); kfree(this->mtd.name); kfree(this); @@ -153,7 +153,7 @@ static int register_device(char *name, unsigned long start, unsigned long len) new->mtd.writesize = 1; ret = -EAGAIN; - if (add_mtd_device(&new->mtd)) { + if (mtd_device_register(&new->mtd, NULL, 0)) { pr_err("Failed to register new device\n"); goto out2; } diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c index 41b8cdcc64cb..ecff765579dd 100644 --- a/drivers/mtd/devices/pmc551.c +++ b/drivers/mtd/devices/pmc551.c @@ -798,7 +798,7 @@ static int __init init_pmc551(void) mtd->writesize = 1; mtd->owner = THIS_MODULE; - if (add_mtd_device(mtd)) { + if (mtd_device_register(mtd, NULL, 0)) { printk(KERN_NOTICE "pmc551: Failed to register new device\n"); pci_iounmap(PCI_Device, priv->start); kfree(mtd->priv); @@ -806,7 +806,7 @@ static int __init init_pmc551(void) break; } - /* Keep a reference as the add_mtd_device worked */ + /* Keep a reference as the mtd_device_register worked */ pci_dev_get(PCI_Device); printk(KERN_NOTICE "Registered pmc551 memory device.\n"); @@ -856,7 +856,7 @@ static void __exit cleanup_pmc551(void) pci_dev_put(priv->dev); kfree(mtd->priv); - del_mtd_device(mtd); + mtd_device_unregister(mtd); kfree(mtd); found++; } diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index 592016a0668f..e585263161b9 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -210,7 +210,7 @@ static int register_device(char *name, unsigned long start, unsigned long length (*curmtd)->mtdinfo->erasesize = SLRAM_BLK_SZ; (*curmtd)->mtdinfo->writesize = 1; - if (add_mtd_device((*curmtd)->mtdinfo)) { + if (mtd_device_register((*curmtd)->mtdinfo, NULL, 0)) { E("slram: Failed to register new device\n"); iounmap(((slram_priv_t *)(*curmtd)->mtdinfo->priv)->start); kfree((*curmtd)->mtdinfo->priv); @@ -231,7 +231,7 @@ static void unregister_devices(void) while (slram_mtdlist) { nextitem = slram_mtdlist->next; - del_mtd_device(slram_mtdlist->mtdinfo); + mtd_device_unregister(slram_mtdlist->mtdinfo); iounmap(((slram_priv_t *)slram_mtdlist->mtdinfo->priv)->start); kfree(slram_mtdlist->mtdinfo->priv); kfree(slram_mtdlist->mtdinfo); diff --git a/drivers/mtd/maps/amd76xrom.c b/drivers/mtd/maps/amd76xrom.c index 92de7e3a49a5..e2875d6fe129 100644 --- a/drivers/mtd/maps/amd76xrom.c +++ b/drivers/mtd/maps/amd76xrom.c @@ -82,7 +82,7 @@ static void amd76xrom_cleanup(struct amd76xrom_window *window) if (map->rsrc.parent) { release_resource(&map->rsrc); } - del_mtd_device(map->mtd); + mtd_device_unregister(map->mtd); map_destroy(map->mtd); list_del(&map->list); kfree(map); @@ -262,7 +262,7 @@ static int __devinit amd76xrom_init_one (struct pci_dev *pdev, /* Now that the mtd devices is complete claim and export it */ map->mtd->owner = THIS_MODULE; - if (add_mtd_device(map->mtd)) { + if (mtd_device_register(map->mtd, NULL, 0)) { map_destroy(map->mtd); map->mtd = NULL; goto out; diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c index 53664188fc47..e5bfd0e093bb 100644 --- a/drivers/mtd/maps/autcpu12-nvram.c +++ b/drivers/mtd/maps/autcpu12-nvram.c @@ -88,7 +88,7 @@ map: sram_mtd->owner = THIS_MODULE; sram_mtd->erasesize = 16; - if (add_mtd_device(sram_mtd)) { + if (mtd_device_register(sram_mtd, NULL, 0)) { printk("NV-RAM device addition failed\n"); err = -ENOMEM; goto out_probe; @@ -111,7 +111,7 @@ out: static void __exit cleanup_autcpu12_maps(void) { if (sram_mtd) { - del_mtd_device(sram_mtd); + mtd_device_unregister(sram_mtd); map_destroy(sram_mtd); iounmap((void *)autcpu12_sram_map.virt); } diff --git a/drivers/mtd/maps/bcm963xx-flash.c b/drivers/mtd/maps/bcm963xx-flash.c index 1f3049590d9e..608967fe74c6 100644 --- a/drivers/mtd/maps/bcm963xx-flash.c +++ b/drivers/mtd/maps/bcm963xx-flash.c @@ -224,8 +224,8 @@ probe_ok: goto err_probe; } - return add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, - parsed_nr_parts); + return mtd_device_register(bcm963xx_mtd_info, parsed_parts, + parsed_nr_parts); err_probe: iounmap(bcm963xx_map.virt); @@ -235,7 +235,7 @@ err_probe: static int bcm963xx_remove(struct platform_device *pdev) { if (bcm963xx_mtd_info) { - del_mtd_partitions(bcm963xx_mtd_info); + mtd_device_unregister(bcm963xx_mtd_info); map_destroy(bcm963xx_mtd_info); } diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c index 8d92d8db9a98..c29cbf87ea0c 100644 --- a/drivers/mtd/maps/cdb89712.c +++ b/drivers/mtd/maps/cdb89712.c @@ -75,7 +75,7 @@ static int __init init_cdb89712_flash (void) flash_mtd->owner = THIS_MODULE; - if (add_mtd_device(flash_mtd)) { + if (mtd_device_register(flash_mtd, NULL, 0)) { printk("FLASH device addition failed\n"); err = -ENOMEM; goto out_probe; @@ -141,7 +141,7 @@ static int __init init_cdb89712_sram (void) sram_mtd->owner = THIS_MODULE; sram_mtd->erasesize = 16; - if (add_mtd_device(sram_mtd)) { + if (mtd_device_register(sram_mtd, NULL, 0)) { printk("SRAM device addition failed\n"); err = -ENOMEM; goto out_probe; @@ -209,7 +209,7 @@ static int __init init_cdb89712_bootrom (void) bootrom_mtd->owner = THIS_MODULE; bootrom_mtd->erasesize = 0x10000; - if (add_mtd_device(bootrom_mtd)) { + if (mtd_device_register(bootrom_mtd, NULL, 0)) { printk("BootROM device addition failed\n"); err = -ENOMEM; goto out_probe; @@ -249,21 +249,21 @@ static int __init init_cdb89712_maps(void) static void __exit cleanup_cdb89712_maps(void) { if (sram_mtd) { - del_mtd_device(sram_mtd); + mtd_device_unregister(sram_mtd); map_destroy(sram_mtd); iounmap((void *)cdb89712_sram_map.virt); release_resource (&cdb89712_sram_resource); } if (flash_mtd) { - del_mtd_device(flash_mtd); + mtd_device_unregister(flash_mtd); map_destroy(flash_mtd); iounmap((void *)cdb89712_flash_map.virt); release_resource (&cdb89712_flash_resource); } if (bootrom_mtd) { - del_mtd_device(bootrom_mtd); + mtd_device_unregister(bootrom_mtd); map_destroy(bootrom_mtd); iounmap((void *)cdb89712_bootrom_map.virt); release_resource (&cdb89712_bootrom_resource); diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c index 23f551dc8ca8..06f9c9815720 100644 --- a/drivers/mtd/maps/ceiva.c +++ b/drivers/mtd/maps/ceiva.c @@ -224,7 +224,7 @@ static void __exit clps_destroy_mtd(struct clps_info *clps, struct mtd_info *mtd { int i; - del_mtd_partitions(mtd); + mtd_device_unregister(mtd); if (mtd != clps[0].mtd) mtd_concat_destroy(mtd); @@ -292,11 +292,11 @@ static void __init clps_locate_partitions(struct mtd_info *mtd) if (nr_parts == 0) { printk(KERN_NOTICE "clps flash: no partition info " "available, registering whole flash\n"); - add_mtd_device(mtd); + mtd_device_register(mtd, NULL, 0); } else { printk(KERN_NOTICE "clps flash: using %s partition " "definition\n", part_type); - add_mtd_partitions(mtd, parsed_parts, nr_parts); + mtd_device_register(mtd, parsed_parts, nr_parts); } /* Always succeeds. */ diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c index f71343cd77cc..d16fc9d3b8cd 100644 --- a/drivers/mtd/maps/cfi_flagadm.c +++ b/drivers/mtd/maps/cfi_flagadm.c @@ -107,7 +107,7 @@ static int __init init_flagadm(void) mymtd = do_map_probe("cfi_probe", &flagadm_map); if (mymtd) { mymtd->owner = THIS_MODULE; - add_mtd_partitions(mymtd, flagadm_parts, PARTITION_COUNT); + mtd_device_register(mymtd, flagadm_parts, PARTITION_COUNT); printk(KERN_NOTICE "FlagaDM flash device initialized\n"); return 0; } @@ -119,7 +119,7 @@ static int __init init_flagadm(void) static void __exit cleanup_flagadm(void) { if (mymtd) { - del_mtd_partitions(mymtd); + mtd_device_unregister(mymtd); map_destroy(mymtd); } if (flagadm_map.virt) { diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c index 5fdb7b26cea3..3d0e762fa5f2 100644 --- a/drivers/mtd/maps/ck804xrom.c +++ b/drivers/mtd/maps/ck804xrom.c @@ -94,7 +94,7 @@ static void ck804xrom_cleanup(struct ck804xrom_window *window) if (map->rsrc.parent) release_resource(&map->rsrc); - del_mtd_device(map->mtd); + mtd_device_unregister(map->mtd); map_destroy(map->mtd); list_del(&map->list); kfree(map); @@ -291,7 +291,7 @@ static int __devinit ck804xrom_init_one (struct pci_dev *pdev, /* Now that the mtd devices is complete claim and export it */ map->mtd->owner = THIS_MODULE; - if (add_mtd_device(map->mtd)) { + if (mtd_device_register(map->mtd, NULL, 0)) { map_destroy(map->mtd); map->mtd = NULL; goto out; diff --git a/drivers/mtd/maps/dbox2-flash.c b/drivers/mtd/maps/dbox2-flash.c index cfacfa6f45dd..85bdece6ab3f 100644 --- a/drivers/mtd/maps/dbox2-flash.c +++ b/drivers/mtd/maps/dbox2-flash.c @@ -93,7 +93,7 @@ static int __init init_dbox2_flash(void) mymtd->owner = THIS_MODULE; /* Create MTD devices for each partition. */ - add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS); + mtd_device_register(mymtd, partition_info, NUM_PARTITIONS); return 0; } @@ -105,7 +105,7 @@ static int __init init_dbox2_flash(void) static void __exit cleanup_dbox2_flash(void) { if (mymtd) { - del_mtd_partitions(mymtd); + mtd_device_unregister(mymtd); map_destroy(mymtd); } if (dbox2_flash_map.virt) { diff --git a/drivers/mtd/maps/dilnetpc.c b/drivers/mtd/maps/dilnetpc.c index 0713e3a5a22c..3e393f0da823 100644 --- a/drivers/mtd/maps/dilnetpc.c +++ b/drivers/mtd/maps/dilnetpc.c @@ -450,7 +450,7 @@ static int __init init_dnpc(void) partition_info[2].mtdp = &lowlvl_parts[1]; partition_info[3].mtdp = &lowlvl_parts[3]; - add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS); + mtd_device_register(mymtd, partition_info, NUM_PARTITIONS); /* ** now create a virtual MTD device by concatenating the for partitions @@ -463,7 +463,8 @@ static int __init init_dnpc(void) ** we do not supply mtd pointers in higlvl_partition_info, so ** add_mtd_partitions() will register the devices. */ - add_mtd_partitions(merged_mtd, higlvl_partition_info, NUM_HIGHLVL_PARTITIONS); + mtd_device_register(merged_mtd, higlvl_partition_info, + NUM_HIGHLVL_PARTITIONS); } return 0; @@ -472,12 +473,12 @@ static int __init init_dnpc(void) static void __exit cleanup_dnpc(void) { if(merged_mtd) { - del_mtd_partitions(merged_mtd); + mtd_device_unregister(merged_mtd); mtd_concat_destroy(merged_mtd); } if (mymtd) { - del_mtd_partitions(mymtd); + mtd_device_unregister(mymtd); map_destroy(mymtd); } if (dnpc_map.virt) { diff --git a/drivers/mtd/maps/dmv182.c b/drivers/mtd/maps/dmv182.c index d171674eb2ed..6538ac675e00 100644 --- a/drivers/mtd/maps/dmv182.c +++ b/drivers/mtd/maps/dmv182.c @@ -120,7 +120,7 @@ static int __init init_svme182(void) this_mtd->size >> 20, FLASH_BASE_ADDR); this_mtd->owner = THIS_MODULE; - add_mtd_partitions(this_mtd, partitions, num_parts); + mtd_device_register(this_mtd, partitions, num_parts); return 0; } @@ -129,7 +129,7 @@ static void __exit cleanup_svme182(void) { if (this_mtd) { - del_mtd_partitions(this_mtd); + mtd_device_unregister(this_mtd); map_destroy(this_mtd); } diff --git a/drivers/mtd/maps/esb2rom.c b/drivers/mtd/maps/esb2rom.c index 4feb7507ab7c..08322b1c3e81 100644 --- a/drivers/mtd/maps/esb2rom.c +++ b/drivers/mtd/maps/esb2rom.c @@ -128,7 +128,7 @@ static void esb2rom_cleanup(struct esb2rom_window *window) list_for_each_entry_safe(map, scratch, &window->maps, list) { if (map->rsrc.parent) release_resource(&map->rsrc); - del_mtd_device(map->mtd); + mtd_device_unregister(map->mtd); map_destroy(map->mtd); list_del(&map->list); kfree(map); @@ -352,7 +352,7 @@ static int __devinit esb2rom_init_one(struct pci_dev *pdev, /* Now that the mtd devices is complete claim and export it */ map->mtd->owner = THIS_MODULE; - if (add_mtd_device(map->mtd)) { + if (mtd_device_register(map->mtd, NULL, 0)) { map_destroy(map->mtd); map->mtd = NULL; goto out; diff --git a/drivers/mtd/maps/fortunet.c b/drivers/mtd/maps/fortunet.c index 1e43124d498b..956e2e4f30ea 100644 --- a/drivers/mtd/maps/fortunet.c +++ b/drivers/mtd/maps/fortunet.c @@ -243,8 +243,9 @@ static int __init init_fortunet(void) &map_regions[ix].map_info); } map_regions[ix].mymtd->owner = THIS_MODULE; - add_mtd_partitions(map_regions[ix].mymtd, - map_regions[ix].parts,map_regions_parts[ix]); + mtd_device_register(map_regions[ix].mymtd, + map_regions[ix].parts, + map_regions_parts[ix]); } } if(iy) @@ -261,7 +262,7 @@ static void __exit cleanup_fortunet(void) { if( map_regions[ix].mymtd ) { - del_mtd_partitions( map_regions[ix].mymtd ); + mtd_device_unregister(map_regions[ix].mymtd); map_destroy( map_regions[ix].mymtd ); } iounmap((void *)map_regions[ix].map_info.virt); diff --git a/drivers/mtd/maps/ichxrom.c b/drivers/mtd/maps/ichxrom.c index 1337a4191a0c..6689dcb3124d 100644 --- a/drivers/mtd/maps/ichxrom.c +++ b/drivers/mtd/maps/ichxrom.c @@ -67,7 +67,7 @@ static void ichxrom_cleanup(struct ichxrom_window *window) list_for_each_entry_safe(map, scratch, &window->maps, list) { if (map->rsrc.parent) release_resource(&map->rsrc); - del_mtd_device(map->mtd); + mtd_device_unregister(map->mtd); map_destroy(map->mtd); list_del(&map->list); kfree(map); @@ -287,7 +287,7 @@ static int __devinit ichxrom_init_one (struct pci_dev *pdev, /* Now that the mtd devices is complete claim and export it */ map->mtd->owner = THIS_MODULE; - if (add_mtd_device(map->mtd)) { + if (mtd_device_register(map->mtd, NULL, 0)) { map_destroy(map->mtd); map->mtd = NULL; goto out; diff --git a/drivers/mtd/maps/integrator-flash.c b/drivers/mtd/maps/integrator-flash.c index e22ff5adbbf4..a97bbcf0d584 100644 --- a/drivers/mtd/maps/integrator-flash.c +++ b/drivers/mtd/maps/integrator-flash.c @@ -221,7 +221,7 @@ static int armflash_probe(struct platform_device *dev) err = parse_mtd_partitions(info->mtd, probes, &info->parts, 0); if (err > 0) { - err = add_mtd_partitions(info->mtd, info->parts, err); + err = mtd_device_register(info->mtd, info->parts, err); if (err) printk(KERN_ERR "mtd partition registration failed: %d\n", err); @@ -237,7 +237,7 @@ static int armflash_probe(struct platform_device *dev) */ cleanup: if (info->mtd) { - del_mtd_partitions(info->mtd); + mtd_device_unregister(info->mtd); if (info->mtd != info->subdev[0].mtd) mtd_concat_destroy(info->mtd); } @@ -263,7 +263,7 @@ static int armflash_remove(struct platform_device *dev) if (info) { if (info->mtd) { - del_mtd_partitions(info->mtd); + mtd_device_unregister(info->mtd); if (info->mtd != info->subdev[0].mtd) mtd_concat_destroy(info->mtd); } diff --git a/drivers/mtd/maps/l440gx.c b/drivers/mtd/maps/l440gx.c index 9e054503c4cf..dd0360ba2412 100644 --- a/drivers/mtd/maps/l440gx.c +++ b/drivers/mtd/maps/l440gx.c @@ -138,7 +138,7 @@ static int __init init_l440gx(void) if (mymtd) { mymtd->owner = THIS_MODULE; - add_mtd_device(mymtd); + mtd_device_register(mymtd, NULL, 0); return 0; } @@ -148,7 +148,7 @@ static int __init init_l440gx(void) static void __exit cleanup_l440gx(void) { - del_mtd_device(mymtd); + mtd_device_unregister(mymtd); map_destroy(mymtd); iounmap(l440gx_map.virt); diff --git a/drivers/mtd/maps/mbx860.c b/drivers/mtd/maps/mbx860.c index 0eb5a7c85380..93fa56c33003 100644 --- a/drivers/mtd/maps/mbx860.c +++ b/drivers/mtd/maps/mbx860.c @@ -69,8 +69,8 @@ static int __init init_mbx(void) mymtd = do_map_probe("jedec_probe", &mbx_map); if (mymtd) { mymtd->owner = THIS_MODULE; - add_mtd_device(mymtd); - add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS); + mtd_device_register(mymtd, NULL, 0); + mtd_device_register(mymtd, partition_info, NUM_PARTITIONS); return 0; } @@ -81,7 +81,7 @@ static int __init init_mbx(void) static void __exit cleanup_mbx(void) { if (mymtd) { - del_mtd_device(mymtd); + mtd_device_unregister(mymtd); map_destroy(mymtd); } if (mbx_map.virt) { diff --git a/drivers/mtd/maps/netsc520.c b/drivers/mtd/maps/netsc520.c index c0cb319b2b70..81dc2598bc0a 100644 --- a/drivers/mtd/maps/netsc520.c +++ b/drivers/mtd/maps/netsc520.c @@ -116,14 +116,14 @@ static int __init init_netsc520(void) } mymtd->owner = THIS_MODULE; - add_mtd_partitions( mymtd, partition_info, NUM_PARTITIONS ); + mtd_device_register(mymtd, partition_info, NUM_PARTITIONS); return 0; } static void __exit cleanup_netsc520(void) { if (mymtd) { - del_mtd_partitions(mymtd); + mtd_device_unregister(mymtd); map_destroy(mymtd); } if (netsc520_map.virt) { diff --git a/drivers/mtd/maps/nettel.c b/drivers/mtd/maps/nettel.c index a97133eb9d70..eadcfffc4f9c 100644 --- a/drivers/mtd/maps/nettel.c +++ b/drivers/mtd/maps/nettel.c @@ -383,13 +383,13 @@ static int __init nettel_init(void) /* No BIOS regions when AMD boot */ num_intel_partitions -= 2; } - rc = add_mtd_partitions(intel_mtd, nettel_intel_partitions, - num_intel_partitions); + rc = mtd_device_register(intel_mtd, nettel_intel_partitions, + num_intel_partitions); #endif if (amd_mtd) { - rc = add_mtd_partitions(amd_mtd, nettel_amd_partitions, - num_amd_partitions); + rc = mtd_device_register(amd_mtd, nettel_amd_partitions, + num_amd_partitions); } #ifdef CONFIG_MTD_CFI_INTELEXT @@ -419,7 +419,7 @@ static void __exit nettel_cleanup(void) unregister_reboot_notifier(&nettel_notifier_block); #endif if (amd_mtd) { - del_mtd_partitions(amd_mtd); + mtd_device_unregister(amd_mtd); map_destroy(amd_mtd); } if (nettel_mmcrp) { @@ -432,7 +432,7 @@ static void __exit nettel_cleanup(void) } #ifdef CONFIG_MTD_CFI_INTELEXT if (intel_mtd) { - del_mtd_partitions(intel_mtd); + mtd_device_unregister(intel_mtd); map_destroy(intel_mtd); } if (nettel_intel_map.virt) { diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c index 23fe1786770f..807ac2a2e686 100644 --- a/drivers/mtd/maps/octagon-5066.c +++ b/drivers/mtd/maps/octagon-5066.c @@ -175,7 +175,7 @@ void cleanup_oct5066(void) int i; for (i=0; i<2; i++) { if (oct5066_mtd[i]) { - del_mtd_device(oct5066_mtd[i]); + mtd_device_unregister(oct5066_mtd[i]); map_destroy(oct5066_mtd[i]); } } @@ -220,7 +220,7 @@ static int __init init_oct5066(void) oct5066_mtd[i] = do_map_probe("map_rom", &oct5066_map[i]); if (oct5066_mtd[i]) { oct5066_mtd[i]->owner = THIS_MODULE; - add_mtd_device(oct5066_mtd[i]); + mtd_device_register(oct5066_mtd[i], NULL, 0); } } diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c index 48f4cf5cb9d1..1d005a3e9b41 100644 --- a/drivers/mtd/maps/pci.c +++ b/drivers/mtd/maps/pci.c @@ -313,7 +313,7 @@ mtd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) goto release; mtd->owner = THIS_MODULE; - add_mtd_device(mtd); + mtd_device_register(mtd, NULL, 0); pci_set_drvdata(dev, mtd); @@ -336,7 +336,7 @@ mtd_pci_remove(struct pci_dev *dev) struct mtd_info *mtd = pci_get_drvdata(dev); struct map_pci_info *map = mtd->priv; - del_mtd_device(mtd); + mtd_device_unregister(mtd); map_destroy(mtd); map->exit(dev, map); kfree(map); diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index 6799e75d74e0..a523e2a6af53 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -630,7 +630,7 @@ static int pcmciamtd_config(struct pcmcia_device *link) dev->pcmcia_map.copy_to = pcmcia_copy_to; } - if(add_mtd_device(mtd)) { + if (mtd_device_register(mtd, NULL, 0)) { map_destroy(mtd); dev->mtd_info = NULL; dev_err(&dev->p_dev->dev, @@ -669,7 +669,7 @@ static void pcmciamtd_detach(struct pcmcia_device *link) DEBUG(3, "link=0x%p", link); if(dev->mtd_info) { - del_mtd_device(dev->mtd_info); + mtd_device_unregister(dev->mtd_info); dev_info(&dev->p_dev->dev, "mtd%d: Removing\n", dev->mtd_info->index); map_destroy(dev->mtd_info); diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c index 64aea6acd48e..744ca5cacc9b 100644 --- a/drivers/mtd/maps/pmcmsp-flash.c +++ b/drivers/mtd/maps/pmcmsp-flash.c @@ -173,7 +173,7 @@ static int __init init_msp_flash(void) msp_flash[i] = do_map_probe("cfi_probe", &msp_maps[i]); if (msp_flash[i]) { msp_flash[i]->owner = THIS_MODULE; - add_mtd_partitions(msp_flash[i], msp_parts[i], pcnt); + mtd_device_register(msp_flash[i], msp_parts[i], pcnt); } else { printk(KERN_ERR "map probe failed for flash\n"); ret = -ENXIO; @@ -188,7 +188,7 @@ static int __init init_msp_flash(void) cleanup_loop: while (i--) { - del_mtd_partitions(msp_flash[i]); + mtd_device_unregister(msp_flash[i]); map_destroy(msp_flash[i]); kfree(msp_maps[i].name); iounmap(msp_maps[i].virt); @@ -207,7 +207,7 @@ static void __exit cleanup_msp_flash(void) int i; for (i = 0; i < fcnt; i++) { - del_mtd_partitions(msp_flash[i]); + mtd_device_unregister(msp_flash[i]); map_destroy(msp_flash[i]); iounmap((void *)msp_maps[i].virt); diff --git a/drivers/mtd/maps/rpxlite.c b/drivers/mtd/maps/rpxlite.c index 3e3ef53d4fd4..ed88225bf667 100644 --- a/drivers/mtd/maps/rpxlite.c +++ b/drivers/mtd/maps/rpxlite.c @@ -36,7 +36,7 @@ static int __init init_rpxlite(void) mymtd = do_map_probe("cfi_probe", &rpxlite_map); if (mymtd) { mymtd->owner = THIS_MODULE; - add_mtd_device(mymtd); + mtd_device_register(mymtd, NULL, 0); return 0; } @@ -47,7 +47,7 @@ static int __init init_rpxlite(void) static void __exit cleanup_rpxlite(void) { if (mymtd) { - del_mtd_device(mymtd); + mtd_device_unregister(mymtd); map_destroy(mymtd); } if (rpxlite_map.virt) { diff --git a/drivers/mtd/maps/sbc_gxx.c b/drivers/mtd/maps/sbc_gxx.c index 04b2781fc627..556a2dfe94c5 100644 --- a/drivers/mtd/maps/sbc_gxx.c +++ b/drivers/mtd/maps/sbc_gxx.c @@ -182,7 +182,7 @@ static struct mtd_info *all_mtd; static void cleanup_sbc_gxx(void) { if( all_mtd ) { - del_mtd_partitions( all_mtd ); + mtd_device_unregister(all_mtd); map_destroy( all_mtd ); } @@ -223,7 +223,7 @@ static int __init init_sbc_gxx(void) all_mtd->owner = THIS_MODULE; /* Create MTD devices for each partition. */ - add_mtd_partitions(all_mtd, partition_info, NUM_PARTITIONS ); + mtd_device_register(all_mtd, partition_info, NUM_PARTITIONS); return 0; } diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c index 4d8aaaf4bb76..8fead8e46bce 100644 --- a/drivers/mtd/maps/sc520cdp.c +++ b/drivers/mtd/maps/sc520cdp.c @@ -266,10 +266,10 @@ static int __init init_sc520cdp(void) /* Combine the two flash banks into a single MTD device & register it: */ merged_mtd = mtd_concat_create(mymtd, 2, "SC520CDP Flash Banks #0 and #1"); if(merged_mtd) - add_mtd_device(merged_mtd); + mtd_device_register(merged_mtd, NULL, 0); } if(devices_found == 3) /* register the third (DIL-Flash) device */ - add_mtd_device(mymtd[2]); + mtd_device_register(mymtd[2], NULL, 0); return(devices_found ? 0 : -ENXIO); } @@ -278,11 +278,11 @@ static void __exit cleanup_sc520cdp(void) int i; if (merged_mtd) { - del_mtd_device(merged_mtd); + mtd_device_unregister(merged_mtd); mtd_concat_destroy(merged_mtd); } if (mymtd[2]) - del_mtd_device(mymtd[2]); + mtd_device_unregister(mymtd[2]); for (i = 0; i < NUM_FLASH_BANKS; i++) { if (mymtd[i]) diff --git a/drivers/mtd/maps/scb2_flash.c b/drivers/mtd/maps/scb2_flash.c index 7e329f09a548..d88c8426bb0f 100644 --- a/drivers/mtd/maps/scb2_flash.c +++ b/drivers/mtd/maps/scb2_flash.c @@ -180,7 +180,7 @@ scb2_flash_probe(struct pci_dev *dev, const struct pci_device_id *ent) scb2_mtd->owner = THIS_MODULE; if (scb2_fixup_mtd(scb2_mtd) < 0) { - del_mtd_device(scb2_mtd); + mtd_device_unregister(scb2_mtd); map_destroy(scb2_mtd); iounmap(scb2_ioaddr); if (!region_fail) @@ -192,7 +192,7 @@ scb2_flash_probe(struct pci_dev *dev, const struct pci_device_id *ent) (unsigned long long)scb2_mtd->size, (unsigned long long)(SCB2_WINDOW - scb2_mtd->size)); - add_mtd_device(scb2_mtd); + mtd_device_register(scb2_mtd, NULL, 0); return 0; } @@ -207,7 +207,7 @@ scb2_flash_remove(struct pci_dev *dev) if (scb2_mtd->lock) scb2_mtd->lock(scb2_mtd, 0, scb2_mtd->size); - del_mtd_device(scb2_mtd); + mtd_device_unregister(scb2_mtd); map_destroy(scb2_mtd); iounmap(scb2_ioaddr); diff --git a/drivers/mtd/maps/solutionengine.c b/drivers/mtd/maps/solutionengine.c index 0eb41d9c6786..cbf6bade9354 100644 --- a/drivers/mtd/maps/solutionengine.c +++ b/drivers/mtd/maps/solutionengine.c @@ -89,7 +89,7 @@ static int __init init_soleng_maps(void) eprom_mtd = do_map_probe("map_rom", &soleng_eprom_map); if (eprom_mtd) { eprom_mtd->owner = THIS_MODULE; - add_mtd_device(eprom_mtd); + mtd_device_register(eprom_mtd, NULL, 0); } nr_parts = parse_mtd_partitions(flash_mtd, probes, &parsed_parts, 0); @@ -104,9 +104,9 @@ static int __init init_soleng_maps(void) #endif /* CONFIG_MTD_SUPERH_RESERVE */ if (nr_parts > 0) - add_mtd_partitions(flash_mtd, parsed_parts, nr_parts); + mtd_device_register(flash_mtd, parsed_parts, nr_parts); else - add_mtd_device(flash_mtd); + mtd_device_register(flash_mtd, NULL, 0); return 0; } @@ -114,14 +114,14 @@ static int __init init_soleng_maps(void) static void __exit cleanup_soleng_maps(void) { if (eprom_mtd) { - del_mtd_device(eprom_mtd); + mtd_device_unregister(eprom_mtd); map_destroy(eprom_mtd); } if (parsed_parts) - del_mtd_partitions(flash_mtd); + mtd_device_unregister(flash_mtd); else - del_mtd_device(flash_mtd); + mtd_device_unregister(flash_mtd); map_destroy(flash_mtd); } diff --git a/drivers/mtd/maps/sun_uflash.c b/drivers/mtd/maps/sun_uflash.c index 3f1cb328a574..2d66234f57cb 100644 --- a/drivers/mtd/maps/sun_uflash.c +++ b/drivers/mtd/maps/sun_uflash.c @@ -101,7 +101,7 @@ int uflash_devinit(struct platform_device *op, struct device_node *dp) up->mtd->owner = THIS_MODULE; - add_mtd_device(up->mtd); + mtd_device_register(up->mtd, NULL, 0); dev_set_drvdata(&op->dev, up); @@ -126,7 +126,7 @@ static int __devexit uflash_remove(struct platform_device *op) struct uflash_dev *up = dev_get_drvdata(&op->dev); if (up->mtd) { - del_mtd_device(up->mtd); + mtd_device_unregister(up->mtd); map_destroy(up->mtd); } if (up->map.virt) { diff --git a/drivers/mtd/maps/ts5500_flash.c b/drivers/mtd/maps/ts5500_flash.c index e02dfa9d4ddd..d1d671daf235 100644 --- a/drivers/mtd/maps/ts5500_flash.c +++ b/drivers/mtd/maps/ts5500_flash.c @@ -89,7 +89,7 @@ static int __init init_ts5500_map(void) } mymtd->owner = THIS_MODULE; - add_mtd_partitions(mymtd, ts5500_partitions, NUM_PARTITIONS); + mtd_device_register(mymtd, ts5500_partitions, NUM_PARTITIONS); return 0; @@ -102,7 +102,7 @@ err2: static void __exit cleanup_ts5500_map(void) { if (mymtd) { - del_mtd_partitions(mymtd); + mtd_device_unregister(mymtd); map_destroy(mymtd); } diff --git a/drivers/mtd/maps/tsunami_flash.c b/drivers/mtd/maps/tsunami_flash.c index 77a8bfc02577..1de390e1c2fb 100644 --- a/drivers/mtd/maps/tsunami_flash.c +++ b/drivers/mtd/maps/tsunami_flash.c @@ -76,7 +76,7 @@ static void __exit cleanup_tsunami_flash(void) struct mtd_info *mtd; mtd = tsunami_flash_mtd; if (mtd) { - del_mtd_device(mtd); + mtd_device_unregister(mtd); map_destroy(mtd); } tsunami_flash_mtd = 0; @@ -97,7 +97,7 @@ static int __init init_tsunami_flash(void) } if (tsunami_flash_mtd) { tsunami_flash_mtd->owner = THIS_MODULE; - add_mtd_device(tsunami_flash_mtd); + mtd_device_register(tsunami_flash_mtd, NULL, 0); return 0; } return -ENXIO; diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c index 6adaa6acc193..5e68de73eabc 100644 --- a/drivers/mtd/maps/vmax301.c +++ b/drivers/mtd/maps/vmax301.c @@ -138,7 +138,7 @@ static void __exit cleanup_vmax301(void) for (i=0; i<2; i++) { if (vmax_mtd[i]) { - del_mtd_device(vmax_mtd[i]); + mtd_device_unregister(vmax_mtd[i]); map_destroy(vmax_mtd[i]); } } @@ -176,7 +176,7 @@ static int __init init_vmax301(void) vmax_mtd[i] = do_map_probe("map_rom", &vmax_map[i]); if (vmax_mtd[i]) { vmax_mtd[i]->owner = THIS_MODULE; - add_mtd_device(vmax_mtd[i]); + mtd_device_register(vmax_mtd[i], NULL, 0); } } diff --git a/drivers/mtd/maps/vmu-flash.c b/drivers/mtd/maps/vmu-flash.c index 4afc167731ef..3a04b078576a 100644 --- a/drivers/mtd/maps/vmu-flash.c +++ b/drivers/mtd/maps/vmu-flash.c @@ -563,7 +563,7 @@ static void vmu_queryblocks(struct mapleq *mq) goto fail_cache_create; part_cur->pcache = pcache; - error = add_mtd_device(mtd_cur); + error = mtd_device_register(mtd_cur, NULL, 0); if (error) goto fail_mtd_register; @@ -709,7 +709,7 @@ static void __devexit vmu_disconnect(struct maple_device *mdev) for (x = 0; x < card->partitions; x++) { mpart = ((card->mtd)[x]).priv; mpart->mdev = NULL; - del_mtd_device(&((card->mtd)[x])); + mtd_device_unregister(&((card->mtd)[x])); kfree(((card->parts)[x]).name); } kfree(card->parts); diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c index 933a2b6598b4..901ce968efae 100644 --- a/drivers/mtd/maps/wr_sbc82xx_flash.c +++ b/drivers/mtd/maps/wr_sbc82xx_flash.c @@ -132,17 +132,20 @@ static int __init init_sbc82xx_flash(void) nr_parts = parse_mtd_partitions(sbcmtd[i], part_probes, &sbcmtd_parts[i], 0); if (nr_parts > 0) { - add_mtd_partitions (sbcmtd[i], sbcmtd_parts[i], nr_parts); + mtd_device_register(sbcmtd[i], sbcmtd_parts[i], + nr_parts); continue; } /* No partitioning detected. Use default */ if (i == 2) { - add_mtd_device(sbcmtd[i]); + mtd_device_register(sbcmtd[i], NULL, 0); } else if (i == bigflash) { - add_mtd_partitions (sbcmtd[i], bigflash_parts, ARRAY_SIZE(bigflash_parts)); + mtd_device_register(sbcmtd[i], bigflash_parts, + ARRAY_SIZE(bigflash_parts)); } else { - add_mtd_partitions (sbcmtd[i], smallflash_parts, ARRAY_SIZE(smallflash_parts)); + mtd_device_register(sbcmtd[i], smallflash_parts, + ARRAY_SIZE(smallflash_parts)); } } return 0; @@ -157,9 +160,9 @@ static void __exit cleanup_sbc82xx_flash(void) continue; if (i<2 || sbcmtd_parts[i]) - del_mtd_partitions(sbcmtd[i]); + mtd_device_unregister(sbcmtd[i]); else - del_mtd_device(sbcmtd[i]); + mtd_device_unregister(sbcmtd[i]); kfree(sbcmtd_parts[i]); map_destroy(sbcmtd[i]); diff --git a/drivers/mtd/nand/alauda.c b/drivers/mtd/nand/alauda.c index 8691e0482ed2..eb40ea829ab2 100644 --- a/drivers/mtd/nand/alauda.c +++ b/drivers/mtd/nand/alauda.c @@ -120,7 +120,7 @@ static void alauda_delete(struct kref *kref) struct alauda *al = container_of(kref, struct alauda, kref); if (al->mtd) { - del_mtd_device(al->mtd); + mtd_device_unregister(al->mtd); kfree(al->mtd); } usb_put_dev(al->dev); @@ -592,7 +592,7 @@ static int alauda_init_media(struct alauda *al) mtd->priv = al; mtd->owner = THIS_MODULE; - err = add_mtd_device(mtd); + err = mtd_device_register(mtd, NULL, 0); if (err) { err = -ENFILE; goto error; diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index bc65bf71e1a2..78017eb9318e 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -235,8 +235,8 @@ static int __devinit ams_delta_init(struct platform_device *pdev) } /* Register the partitions */ - add_mtd_partitions(ams_delta_mtd, partition_info, - ARRAY_SIZE(partition_info)); + mtd_device_register(ams_delta_mtd, partition_info, + ARRAY_SIZE(partition_info)); goto out; diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 3ffe05db4923..001545beab9a 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -580,7 +580,8 @@ static int __init au1xxx_nand_init(void) } /* Register the partitions */ - add_mtd_partitions(au1550_mtd, partition_info, ARRAY_SIZE(partition_info)); + mtd_device_register(au1550_mtd, partition_info, + ARRAY_SIZE(partition_info)); return 0; diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c index 0911cf03db80..eddc9a224985 100644 --- a/drivers/mtd/nand/autcpu12.c +++ b/drivers/mtd/nand/autcpu12.c @@ -185,20 +185,20 @@ static int __init autcpu12_init(void) /* Register the partitions */ switch (autcpu12_mtd->size) { case SZ_16M: - add_mtd_partitions(autcpu12_mtd, partition_info16k, - NUM_PARTITIONS16K); + mtd_device_register(autcpu12_mtd, partition_info16k, + NUM_PARTITIONS16K); break; case SZ_32M: - add_mtd_partitions(autcpu12_mtd, partition_info32k, - NUM_PARTITIONS32K); + mtd_device_register(autcpu12_mtd, partition_info32k, + NUM_PARTITIONS32K); break; case SZ_64M: - add_mtd_partitions(autcpu12_mtd, partition_info64k, - NUM_PARTITIONS64K); + mtd_device_register(autcpu12_mtd, partition_info64k, + NUM_PARTITIONS64K); break; case SZ_128M: - add_mtd_partitions(autcpu12_mtd, partition_info128k, - NUM_PARTITIONS128K); + mtd_device_register(autcpu12_mtd, partition_info128k, + NUM_PARTITIONS128K); break; default: printk("Unsupported SmartMedia device\n"); diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index 6e6495278258..6fc043a30d1e 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c @@ -238,7 +238,7 @@ static int __init cmx270_init(void) /* Register the partitions */ pr_notice("Using %s partition definition\n", part_type); - ret = add_mtd_partitions(cmx270_nand_mtd, mtd_parts, mtd_parts_nb); + ret = mtd_device_register(cmx270_nand_mtd, mtd_parts, mtd_parts_nb); if (ret) goto err_scan; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 8c5dc89da2d2..d5276218945f 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1644,7 +1644,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) goto failed_req_irq; } - ret = add_mtd_device(&denali->mtd); + ret = mtd_device_register(&denali->mtd, NULL, 0); if (ret) { dev_err(&dev->dev, "Spectra: Failed to register MTD: %d\n", ret); @@ -1676,7 +1676,7 @@ static void denali_pci_remove(struct pci_dev *dev) struct denali_nand_info *denali = pci_get_drvdata(dev); nand_release(&denali->mtd); - del_mtd_device(&denali->mtd); + mtd_device_unregister(&denali->mtd); denali_irq_cleanup(dev->irq, denali); diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c index 0cde618bcc1e..2c2060b2800e 100644 --- a/drivers/mtd/nand/gpio.c +++ b/drivers/mtd/nand/gpio.c @@ -316,8 +316,8 @@ static int __devinit gpio_nand_probe(struct platform_device *dev) gpiomtd->plat.adjust_parts(&gpiomtd->plat, gpiomtd->mtd_info.size); - add_mtd_partitions(&gpiomtd->mtd_info, gpiomtd->plat.parts, - gpiomtd->plat.num_parts); + mtd_device_register(&gpiomtd->mtd_info, gpiomtd->plat.parts, + gpiomtd->plat.num_parts); platform_set_drvdata(dev, gpiomtd); return 0; diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 893d95bfea48..357e8c5252a8 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -2383,7 +2383,9 @@ static int __init ns_init_module(void) goto err_exit; /* Register NAND partitions */ - if ((retval = add_mtd_partitions(nsmtd, &nand->partitions[0], nand->nbparts)) != 0) + retval = mtd_device_register(nsmtd, &nand->partitions[0], + nand->nbparts); + if (retval != 0) goto err_exit; return 0; diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c index 6eddf7361ed7..9c30a0b03171 100644 --- a/drivers/mtd/nand/nuc900_nand.c +++ b/drivers/mtd/nand/nuc900_nand.c @@ -321,8 +321,8 @@ static int __devinit nuc900_nand_probe(struct platform_device *pdev) goto fail3; } - add_mtd_partitions(&(nuc900_nand->mtd), partitions, - ARRAY_SIZE(partitions)); + mtd_device_register(&(nuc900_nand->mtd), partitions, + ARRAY_SIZE(partitions)); platform_set_drvdata(pdev, nuc900_nand); diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 20bfe5f15afd..b1aa41b8a4eb 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -163,7 +163,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev) goto out_lpc; } - if (add_mtd_device(pasemi_nand_mtd)) { + if (mtd_device_register(pasemi_nand_mtd, NULL, 0)) { printk(KERN_ERR "pasemi_nand: Unable to register MTD device\n"); err = -ENODEV; goto out_lpc; diff --git a/drivers/mtd/nand/rtc_from4.c b/drivers/mtd/nand/rtc_from4.c index 67440b5beef8..c9f9127ff770 100644 --- a/drivers/mtd/nand/rtc_from4.c +++ b/drivers/mtd/nand/rtc_from4.c @@ -580,7 +580,8 @@ static int __init rtc_from4_init(void) #endif /* Register the partitions */ - ret = add_mtd_partitions(rtc_from4_mtd, partition_info, NUM_PARTITIONS); + ret = mtd_device_register(rtc_from4_mtd, partition_info, + NUM_PARTITIONS); if (ret) goto err_3; diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index 81bbb5ee148d..93b1f74321c2 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -867,7 +867,7 @@ static int __devinit flctl_probe(struct platform_device *pdev) if (ret) goto err; - add_mtd_partitions(flctl_mtd, pdata->parts, pdata->nr_parts); + mtd_device_register(flctl_mtd, pdata->parts, pdata->nr_parts); return 0; diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c index 57cc80cd01a3..b6332e83b289 100644 --- a/drivers/mtd/nand/sm_common.c +++ b/drivers/mtd/nand/sm_common.c @@ -139,7 +139,7 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia) if (ret) return ret; - return add_mtd_device(mtd); + return mtd_device_register(mtd, NULL, 0); } EXPORT_SYMBOL_GPL(sm_register_device); diff --git a/drivers/mtd/nand/spia.c b/drivers/mtd/nand/spia.c index 0cc6d0acb8fe..bef76cd7c24c 100644 --- a/drivers/mtd/nand/spia.c +++ b/drivers/mtd/nand/spia.c @@ -149,7 +149,7 @@ static int __init spia_init(void) } /* Register the partitions */ - add_mtd_partitions(spia_mtd, partition_info, NUM_PARTITIONS); + mtd_device_register(spia_mtd, partition_info, NUM_PARTITIONS); /* Return happy */ return 0; diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c index 5ef3bd547772..85399e3accda 100644 --- a/drivers/mtd/onenand/onenand_sim.c +++ b/drivers/mtd/onenand/onenand_sim.c @@ -539,7 +539,8 @@ static int __init onenand_sim_init(void) return -ENXIO; } - add_mtd_partitions(&info->mtd, info->parts, ARRAY_SIZE(os_partitions)); + mtd_device_register(&info->mtd, info->parts, + ARRAY_SIZE(os_partitions)); return 0; } diff --git a/drivers/mtd/ubi/gluebi.c b/drivers/mtd/ubi/gluebi.c index 9aa81584c8a2..941bc3c05d6e 100644 --- a/drivers/mtd/ubi/gluebi.c +++ b/drivers/mtd/ubi/gluebi.c @@ -365,7 +365,7 @@ static int gluebi_create(struct ubi_device_info *di, vi->vol_id); mutex_unlock(&devices_mutex); - if (add_mtd_device(mtd)) { + if (mtd_device_register(mtd, NULL, 0)) { err_msg("cannot add MTD device"); kfree(mtd->name); kfree(gluebi); @@ -407,7 +407,7 @@ static int gluebi_remove(struct ubi_volume_info *vi) return err; mtd = &gluebi->mtd; - err = del_mtd_device(mtd); + err = mtd_device_unregister(mtd); if (err) { err_msg("cannot remove fake MTD device %d, UBI device %d, " "volume %d, error %d", mtd->index, gluebi->ubi_num, @@ -524,7 +524,7 @@ static void __exit ubi_gluebi_exit(void) int err; struct mtd_info *mtd = &gluebi->mtd; - err = del_mtd_device(mtd); + err = mtd_device_unregister(mtd); if (err) err_msg("error %d while removing gluebi MTD device %d, " "UBI device %d, volume %d - ignoring", err, diff --git a/drivers/net/sfc/mtd.c b/drivers/net/sfc/mtd.c index e646bfce2d84..b6304486f244 100644 --- a/drivers/net/sfc/mtd.c +++ b/drivers/net/sfc/mtd.c @@ -216,7 +216,7 @@ static void efx_mtd_remove_partition(struct efx_mtd_partition *part) int rc; for (;;) { - rc = del_mtd_device(&part->mtd); + rc = mtd_device_unregister(&part->mtd); if (rc != -EBUSY) break; ssleep(1); @@ -268,7 +268,7 @@ static int efx_mtd_probe_device(struct efx_nic *efx, struct efx_mtd *efx_mtd) part->mtd.write = efx_mtd->ops->write; part->mtd.sync = efx_mtd_sync; - if (add_mtd_device(&part->mtd)) + if (mtd_device_register(&part->mtd, NULL, 0)) goto fail; } @@ -280,7 +280,7 @@ fail: --part; efx_mtd_remove_partition(part); } - /* add_mtd_device() returns 1 if the MTD table is full */ + /* mtd_device_register() returns 1 if the MTD table is full */ return -ENOMEM; } -- cgit v1.2.3 From eea72d5fdf59879edb2c6639b0b7cc385e0df646 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:42 +0100 Subject: mtd: remove add_mtd_partitions, add_mtd_device and friends These symbols are replaced with mtd_device_register() (and removal with mtd_device_unregister()) for public registration. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 4 +--- drivers/mtd/mtdcore.h | 6 ++++++ drivers/mtd/mtdpart.c | 4 ++-- include/linux/mtd/mtd.h | 3 --- include/linux/mtd/partitions.h | 9 --------- 5 files changed, 9 insertions(+), 17 deletions(-) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 9af103bf9218..c510aff289a8 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -393,7 +393,7 @@ fail_locked: * if the requested device does not appear to be present in the list. */ -int del_mtd_device (struct mtd_info *mtd) +int del_mtd_device(struct mtd_info *mtd) { int ret; struct mtd_notifier *not; @@ -723,8 +723,6 @@ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size) return kmalloc(*size, GFP_KERNEL); } -EXPORT_SYMBOL_GPL(add_mtd_device); -EXPORT_SYMBOL_GPL(del_mtd_device); EXPORT_SYMBOL_GPL(get_mtd_device); EXPORT_SYMBOL_GPL(get_mtd_device_nm); EXPORT_SYMBOL_GPL(__get_mtd_device); diff --git a/drivers/mtd/mtdcore.h b/drivers/mtd/mtdcore.h index 6a64fdebc898..0ed6126b4c1f 100644 --- a/drivers/mtd/mtdcore.h +++ b/drivers/mtd/mtdcore.h @@ -10,6 +10,12 @@ extern struct mutex mtd_table_mutex; extern struct mtd_info *__mtd_next_device(int i); +extern int add_mtd_device(struct mtd_info *mtd); +extern int del_mtd_device(struct mtd_info *mtd); +extern int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, + int); +extern int del_mtd_partitions(struct mtd_info *); + #define mtd_for_each_device(mtd) \ for ((mtd) = __mtd_next_device(0); \ (mtd) != NULL; \ diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index cd631e773a7b..630be3e7da04 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -31,6 +31,8 @@ #include #include +#include "mtdcore.h" + /* Our partition linked list */ static LIST_HEAD(mtd_partitions); static DEFINE_MUTEX(mtd_partitions_mutex); @@ -376,7 +378,6 @@ int del_mtd_partitions(struct mtd_info *master) return err; } -EXPORT_SYMBOL(del_mtd_partitions); static struct mtd_part *allocate_partition(struct mtd_info *master, const struct mtd_partition *part, int partno, @@ -671,7 +672,6 @@ int add_mtd_partitions(struct mtd_info *master, return 0; } -EXPORT_SYMBOL(add_mtd_partitions); static DEFINE_SPINLOCK(part_parser_lock); static LIST_HEAD(part_parsers); diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index f4b0b27a7bbe..1e3887bc105c 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -322,9 +322,6 @@ static inline uint32_t mtd_mod_by_ws(uint64_t sz, struct mtd_info *mtd) /* Kernel-side ioctl definitions */ -extern int add_mtd_device(struct mtd_info *mtd); -extern int del_mtd_device (struct mtd_info *mtd); - struct mtd_partition; extern int mtd_device_register(struct mtd_info *master, diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index afe32db14a87..3a6f0372fc96 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -49,9 +49,6 @@ struct mtd_partition { struct mtd_info; -int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int); -int del_mtd_partitions(struct mtd_info *); - /* * Functions dealing with the various ways of partitioning the space */ @@ -86,12 +83,6 @@ static inline int of_mtd_parse_partitions(struct device *dev, } #endif -#ifdef CONFIG_MTD_PARTITIONS -static inline int mtd_has_partitions(void) { return 1; } -#else -static inline int mtd_has_partitions(void) { return 0; } -#endif - #ifdef CONFIG_MTD_CMDLINE_PARTS static inline int mtd_has_cmdlinepart(void) { return 1; } #else -- cgit v1.2.3 From 6a8a98b22b10f1560d5f90aded4a54234b9b2724 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Mon, 23 May 2011 10:23:43 +0100 Subject: mtd: kill CONFIG_MTD_PARTITIONS Now that none of the drivers use CONFIG_MTD_PARTITIONS we can remove it from Kconfig and the last remaining uses. Signed-off-by: Jamie Iles Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- Documentation/DocBook/mtdnand.tmpl | 3 +-- drivers/mtd/Kconfig | 10 +--------- drivers/mtd/Makefile | 3 +-- drivers/mtd/maps/Kconfig | 14 +++++--------- drivers/mtd/mtdchar.c | 5 ----- drivers/mtd/nand/Kconfig | 3 +-- include/linux/mtd/mtd.h | 8 -------- 7 files changed, 9 insertions(+), 37 deletions(-) diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index 6f242d5dee9a..17910e2052ad 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -189,8 +189,7 @@ static void __iomem *baseaddr; Partition defines If you want to divide your device into partitions, then - enable the configuration switch CONFIG_MTD_PARTITIONS and define - a partitioning scheme suitable to your board. + define a partitioning scheme suitable to your board. #define NUM_PARTITIONS 2 diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 8b61b0cc7b45..62b4fdbb9ad1 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -1,7 +1,6 @@ menuconfig MTD tristate "Memory Technology Device (MTD) support" depends on HAS_IOMEM - select MTD_PARTITIONS help Memory Technology Devices are flash, RAM and similar chips, often used for solid state file systems on embedded devices. This option @@ -34,11 +33,6 @@ config MTD_TESTS should normally be compiled as kernel modules. The modules perform various checks and verifications when loaded. -config MTD_PARTITIONS - bool - -if MTD_PARTITIONS - config MTD_REDBOOT_PARTS tristate "RedBoot partition table parsing" ---help--- @@ -91,7 +85,7 @@ endif # MTD_REDBOOT_PARTS config MTD_CMDLINE_PARTS bool "Command line partition table parsing" - depends on MTD_PARTITIONS = "y" && MTD = "y" + depends on MTD = "y" ---help--- Allow generic configuration of the MTD partition tables via the kernel command line. Multiple flash resources are supported for hardware where @@ -156,8 +150,6 @@ config MTD_AR7_PARTS ---help--- TI AR7 partitioning support -endif # MTD_PARTITIONS - comment "User Modules And Translation Layers" config MTD_CHAR diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index d578095fb255..39664c4229ff 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -4,8 +4,7 @@ # Core functionality. obj-$(CONFIG_MTD) += mtd.o -mtd-y := mtdcore.o mtdsuper.o mtdconcat.o -mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o +mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtd-$(CONFIG_MTD_OF_PARTS) += ofpart.o obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 44032433730d..195b9ef3b7ee 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -82,7 +82,6 @@ config MTD_PHYSMAP_OF config MTD_PMC_MSP_EVM tristate "CFI Flash device mapped on PMC-Sierra MSP" depends on PMC_MSP && MTD_CFI - select MTD_PARTITIONS help This provides a 'mapping' driver which supports the way in which user-programmable flash chips are connected on the @@ -122,7 +121,7 @@ config MTD_SC520CDP config MTD_NETSC520 tristate "CFI Flash device mapped on AMD NetSc520" - depends on X86 && MTD_CFI && MTD_PARTITIONS + depends on X86 && MTD_CFI help This enables access routines for the flash chips on the AMD NetSc520 demonstration board. If you have one of these boards and would like @@ -131,7 +130,6 @@ config MTD_NETSC520 config MTD_TS5500 tristate "JEDEC Flash device mapped on Technologic Systems TS-5500" depends on X86 - select MTD_PARTITIONS select MTD_JEDECPROBE select MTD_CFI_AMDSTD help @@ -149,7 +147,7 @@ config MTD_TS5500 config MTD_SBC_GXX tristate "CFI Flash device mapped on Arcom SBC-GXx boards" - depends on X86 && MTD_CFI_INTELEXT && MTD_PARTITIONS && MTD_COMPLEX_MAPPINGS + depends on X86 && MTD_CFI_INTELEXT && MTD_COMPLEX_MAPPINGS help This provides a driver for the on-board flash of Arcom Control Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX. @@ -246,7 +244,7 @@ config MTD_TSUNAMI config MTD_NETtel tristate "CFI flash device on SnapGear/SecureEdge" - depends on X86 && MTD_PARTITIONS && MTD_JEDECPROBE + depends on X86 && MTD_JEDECPROBE help Support for flash chips on NETtel/SecureEdge/SnapGear boards. @@ -261,7 +259,7 @@ config MTD_BCM963XX config MTD_DILNETPC tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN + depends on X86 && MTD_CFI_INTELEXT && BROKEN help MTD map driver for SSV DIL/Net PC Boards "DNP" and "ADNP". For details, see @@ -381,7 +379,7 @@ config MTD_IXP2000 config MTD_FORTUNET tristate "CFI Flash device mapped on the FortuNet board" - depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET + depends on MTD_CFI && SA1100_FORTUNET help This enables access to the Flash on the FortuNet board. If you have such a board, say 'Y'. @@ -479,7 +477,6 @@ config MTD_UCLINUX config MTD_WRSBC8260 tristate "Map driver for WindRiver PowerQUICC II MPC82xx board" depends on (SBC82xx || SBC8560) - select MTD_PARTITIONS select MTD_MAP_BANK_WIDTH_4 select MTD_MAP_BANK_WIDTH_1 select MTD_CFI_I1 @@ -492,7 +489,6 @@ config MTD_WRSBC8260 config MTD_DMV182 tristate "Map driver for Dy-4 SVME/DMV-182 board." depends on DMV182 - select MTD_PARTITIONS select MTD_MAP_BANK_WIDTH_32 select MTD_CFI_I8 select MTD_CFI_AMDSTD diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index f488eabaa7b5..3f92731a5b9e 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -508,7 +508,6 @@ static int shrink_ecclayout(const struct nand_ecclayout *from, return 0; } -#ifdef CONFIG_MTD_PARTITIONS static int mtd_blkpg_ioctl(struct mtd_info *mtd, struct blkpg_ioctl_arg __user *arg) { @@ -544,8 +543,6 @@ static int mtd_blkpg_ioctl(struct mtd_info *mtd, return -EINVAL; } } -#endif - static int mtd_ioctl(struct file *file, u_int cmd, u_long arg) { @@ -937,7 +934,6 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg) break; } -#ifdef CONFIG_MTD_PARTITIONS case BLKPG: { ret = mtd_blkpg_ioctl(mtd, @@ -951,7 +947,6 @@ static int mtd_ioctl(struct file *file, u_int cmd, u_long arg) ret = 0; break; } -#endif default: ret = -ENOTTY; diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 333d23122226..4c3425235adc 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -419,7 +419,6 @@ config MTD_NAND_TMIO config MTD_NAND_NANDSIM tristate "Support for NAND Flash Simulator" - depends on MTD_PARTITIONS help The simulator may simulate various NAND flash chips for the MTD nand layer. @@ -513,7 +512,7 @@ config MTD_NAND_SOCRATES config MTD_NAND_NUC900 tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards." - depends on ARCH_W90X900 && MTD_PARTITIONS + depends on ARCH_W90X900 help This enables the driver for the NAND Flash on evaluation board based on w90p910 / NUC9xx. diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 1e3887bc105c..2541fb848daa 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -353,15 +353,7 @@ int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size); -#ifdef CONFIG_MTD_PARTITIONS void mtd_erase_callback(struct erase_info *instr); -#else -static inline void mtd_erase_callback(struct erase_info *instr) -{ - if (instr->callback) - instr->callback(instr); -} -#endif /* * Debugging macro and defines -- cgit v1.2.3 From 1c7fcbed1adee44708dafb65ac40b186c203d7e8 Mon Sep 17 00:00:00 2001 From: Damian Date: Tue, 24 May 2011 07:01:22 +0000 Subject: sh_mobile_meram: MERAM platform data for LCDC Based on the patch by Takanari Hayama Add the necessary platform data to add MERAM functionality to LCDC Includes platform data for both the AP4EVB and mackerel Signed-off-by: Damian Hobson-Garcia Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ap4evb.c | 56 +++++++++++++++++++++++++++++++ arch/arm/mach-shmobile/board-mackerel.c | 58 +++++++++++++++++++++++++++++++++ 2 files changed, 114 insertions(+) diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 1e35fa976d64..c9aad5eefccc 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -249,6 +249,29 @@ static int slot_cn7_get_cd(struct platform_device *pdev) { return !gpio_get_value(GPIO_PORT41); } +/* MERAM */ +static struct sh_mobile_meram_info meram_info = { + .addr_mode = SH_MOBILE_MERAM_MODE1, +}; + +static struct resource meram_resources[] = { + [0] = { + .name = "MERAM", + .start = 0xe8000000, + .end = 0xe81fffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device meram_device = { + .name = "sh_mobile_meram", + .id = 0, + .num_resources = ARRAY_SIZE(meram_resources), + .resource = meram_resources, + .dev = { + .platform_data = &meram_info, + }, +}; /* SH_MMCIF */ static struct resource sh_mmcif_resources[] = { @@ -431,13 +454,29 @@ const static struct fb_videomode ap4evb_lcdc_modes[] = { #endif }, }; +static struct sh_mobile_meram_cfg lcd_meram_cfg = { + .icb[0] = { + .marker_icb = 28, + .cache_icb = 24, + .meram_offset = 0x0, + .meram_size = 0x40, + }, + .icb[1] = { + .marker_icb = 29, + .cache_icb = 25, + .meram_offset = 0x40, + .meram_size = 0x40, + }, +}; static struct sh_mobile_lcdc_info lcdc_info = { + .meram_dev = &meram_info, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .bpp = 16, .lcd_cfg = ap4evb_lcdc_modes, .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes), + .meram_cfg = &lcd_meram_cfg, } }; @@ -708,15 +747,31 @@ static struct platform_device fsi_device = { static struct platform_device fsi_ak4643_device = { .name = "sh_fsi2_a_ak4643", }; +static struct sh_mobile_meram_cfg hdmi_meram_cfg = { + .icb[0] = { + .marker_icb = 30, + .cache_icb = 26, + .meram_offset = 0x80, + .meram_size = 0x100, + }, + .icb[1] = { + .marker_icb = 31, + .cache_icb = 27, + .meram_offset = 0x180, + .meram_size = 0x100, + }, +}; static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { .clock_source = LCDC_CLK_EXTERNAL, + .meram_dev = &meram_info, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .bpp = 16, .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, + .meram_cfg = &hdmi_meram_cfg, } }; @@ -945,6 +1000,7 @@ static struct platform_device *ap4evb_devices[] __initdata = { &csi2_device, &ceu_device, &ap4evb_camera, + &meram_device, }; static void __init hdmi_init_pm_clock(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 7da2ca24229d..a165a9e70eea 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -279,6 +279,30 @@ static struct platform_device smc911x_device = { }, }; +/* MERAM */ +static struct sh_mobile_meram_info mackerel_meram_info = { + .addr_mode = SH_MOBILE_MERAM_MODE1, +}; + +static struct resource meram_resources[] = { + [0] = { + .name = "MERAM", + .start = 0xe8000000, + .end = 0xe81fffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device meram_device = { + .name = "sh_mobile_meram", + .id = 0, + .num_resources = ARRAY_SIZE(meram_resources), + .resource = meram_resources, + .dev = { + .platform_data = &mackerel_meram_info, + }, +}; + /* LCDC */ static struct fb_videomode mackerel_lcdc_modes[] = { { @@ -307,7 +331,23 @@ static int mackerel_get_brightness(void *board_data) return gpio_get_value(GPIO_PORT31); } +static struct sh_mobile_meram_cfg lcd_meram_cfg = { + .icb[0] = { + .marker_icb = 28, + .cache_icb = 24, + .meram_offset = 0x0, + .meram_size = 0x40, + }, + .icb[1] = { + .marker_icb = 29, + .cache_icb = 25, + .meram_offset = 0x40, + .meram_size = 0x40, + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { + .meram_dev = &mackerel_meram_info, .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, @@ -327,6 +367,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .name = "sh_mobile_lcdc_bl", .max_brightness = 1, }, + .meram_cfg = &lcd_meram_cfg, } }; @@ -353,8 +394,23 @@ static struct platform_device lcdc_device = { }, }; +static struct sh_mobile_meram_cfg hdmi_meram_cfg = { + .icb[0] = { + .marker_icb = 30, + .cache_icb = 26, + .meram_offset = 0x80, + .meram_size = 0x100, + }, + .icb[1] = { + .marker_icb = 31, + .cache_icb = 27, + .meram_offset = 0x180, + .meram_size = 0x100, + }, +}; /* HDMI */ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { + .meram_dev = &mackerel_meram_info, .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, @@ -362,6 +418,7 @@ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, + .meram_cfg = &hdmi_meram_cfg, } }; @@ -949,6 +1006,7 @@ static struct platform_device *mackerel_devices[] __initdata = { &mackerel_camera, &hdmi_lcdc_device, &hdmi_device, + &meram_device, }; /* Keypad Initialization */ -- cgit v1.2.3 From 54525552c6ccfd867e819845da14be994e303218 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 24 May 2011 10:23:59 +0000 Subject: sh: mark DMA slave ID 0 as invalid This makes it possible to leave DMA slave IDs in the platform data at default 0 value without hitting DMA channel allocation error paths. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/sh/include/cpu-sh4/cpu/sh7722.h | 1 + arch/sh/include/cpu-sh4/cpu/sh7724.h | 1 + arch/sh/include/cpu-sh4/cpu/sh7757.h | 1 + 3 files changed, 3 insertions(+) diff --git a/arch/sh/include/cpu-sh4/cpu/sh7722.h b/arch/sh/include/cpu-sh4/cpu/sh7722.h index 7a5b8a331b4a..bd0622788d64 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7722.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7722.h @@ -236,6 +236,7 @@ enum { }; enum { + SHDMA_SLAVE_INVALID, SHDMA_SLAVE_SCIF0_TX, SHDMA_SLAVE_SCIF0_RX, SHDMA_SLAVE_SCIF1_TX, diff --git a/arch/sh/include/cpu-sh4/cpu/sh7724.h b/arch/sh/include/cpu-sh4/cpu/sh7724.h index 7eb435999426..3daef8ecbc63 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7724.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7724.h @@ -285,6 +285,7 @@ enum { }; enum { + SHDMA_SLAVE_INVALID, SHDMA_SLAVE_SCIF0_TX, SHDMA_SLAVE_SCIF0_RX, SHDMA_SLAVE_SCIF1_TX, diff --git a/arch/sh/include/cpu-sh4/cpu/sh7757.h b/arch/sh/include/cpu-sh4/cpu/sh7757.h index 05b8196c7753..41f9f8b9db73 100644 --- a/arch/sh/include/cpu-sh4/cpu/sh7757.h +++ b/arch/sh/include/cpu-sh4/cpu/sh7757.h @@ -252,6 +252,7 @@ enum { }; enum { + SHDMA_SLAVE_INVALID, SHDMA_SLAVE_SDHI_TX, SHDMA_SLAVE_SDHI_RX, SHDMA_SLAVE_MMCIF_TX, -- cgit v1.2.3 From ac10f81d94f49f1bd9618680263400d275ddf825 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 25 May 2011 01:00:45 -0400 Subject: drm/radeon/kms/blit: workaround some hw issues on evergreen+ Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen_blit_kms.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/radeon/evergreen_blit_kms.c b/drivers/gpu/drm/radeon/evergreen_blit_kms.c index ba06a69c6de8..40867290863c 100644 --- a/drivers/gpu/drm/radeon/evergreen_blit_kms.c +++ b/drivers/gpu/drm/radeon/evergreen_blit_kms.c @@ -199,6 +199,16 @@ static void set_scissors(struct radeon_device *rdev, int x1, int y1, int x2, int y2) { + /* workaround some hw bugs */ + if (x2 == 0) + x1 = 1; + if (y2 == 0) + y1 = 1; + if (rdev->family == CHIP_CAYMAN) { + if ((x2 == 1) && (y2 == 1)) + x2 = 2; + } + radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONTEXT_REG, 2)); radeon_ring_write(rdev, (PA_SC_SCREEN_SCISSOR_TL - PACKET3_SET_CONTEXT_REG_START) >> 2); radeon_ring_write(rdev, (x1 << 0) | (y1 << 16)); -- cgit v1.2.3 From 4e60b4f8300c1e15753e8c82c699d52603646200 Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Tue, 24 May 2011 22:16:15 +0100 Subject: ALSA: hda - Force AD1988_6STACK_DIG for Asus M3N-HT Deluxe The microphone input on the back panel (pink connector) stopped operating correctly after an upgrade from 2.6.35 to 2.6.38; the actual problem manifests itself as a lack of microphone bias voltage (VREF_HIZ) on node 0x17. With AD1988_6STACK_DIG the maximum bias voltage (VREF_80) is applied and the headset operates correctly. Signed-off-by: Tony Vroon Tested-by: Doug Redlich Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_analog.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index f1b3875c57df..696ac2590307 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3159,6 +3159,7 @@ static const struct snd_pci_quirk ad1988_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x81ec, "Asus P5B-DLX", AD1988_6STACK_DIG), SND_PCI_QUIRK(0x1043, 0x81f6, "Asus M2N-SLI", AD1988_6STACK_DIG), SND_PCI_QUIRK(0x1043, 0x8277, "Asus P5K-E/WIFI-AP", AD1988_6STACK_DIG), + SND_PCI_QUIRK(0x1043, 0x82c0, "Asus M3N-HT Deluxe", AD1988_6STACK_DIG), SND_PCI_QUIRK(0x1043, 0x8311, "Asus P5Q-Premium/Pro", AD1988_6STACK_DIG), {} }; -- cgit v1.2.3 From 5d44f927a5467d64c4f1e0d579bcb3f543c275e0 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Tue, 24 May 2011 17:11:17 -0600 Subject: ALSA: HDA: Unify HDMI hotplug handling. This change unifies the initial handling of a pin's state with the code to update a pin's state after a hotplug (unsolicited response) event. The initial probing, and all updates, are now routed through hdmi_present_sense. The stored PD and ELDV status is now always derived from GetPinSense verb execution, and not from the data in the unsolicited response. This means: a) The WAR for NVIDIA codec's UR.PD values ("old_pin_detect") can be removed, since this only affected the no-longer-used unsolicited response payload. b) In turn, this means that most NVIDIA codecs can simply use patch_generic_hdmi instead of having a custom variant just to set old_pin_detect. c) When PD && ELDV becomes true, no extra verbs are executed, because the GetPinSense that was previously executed by snd_hdmi_get_eld (really, hdmi_eld_valid) has simply moved into hdmi_present_sense. d) When PD && ELDV becomes false, there is a single extra GetPinSense verb executed for codecs where old_pin_detect wasn't set, i.e. some NVIDIA, and all ATI/AMD and Intel codecs. I doubt this will be a performance issue. The new unified code in hdmi_present_sense also ensures that eld->eld_valid is not set unless eld->monitor_present is also set. This protects against potential invalid combinations of PD and ELDV received from HW, and transitively from a graphics driver. Also, print the derived PD/ELDV bits from hdmi_present_sense so the kernel log always displays the actual state stored, which will differ from the values in the unsolicited response for NVIDIA HW where old_pin_detect was previously set. Finally, a couple of small tweaks originally by Takashi: * Clear the ELD content to zero before reading it, so that if it's not read (i.e. when !(PD && ELDV)) it's in a known state. * Don't show ELD fields in /proc ELD files when the ELD isn't valid. The only possibility I can see for regression here is a codec where the GetPinSense verb returns incorrect data. However, we're already exposed to that, since that data is used (a) from hdmi_add_pin to set up the initial pin state, and (b) within snd_hda_input_jack_report to query a pin's presence value. As such, I don't believe any HW has bugs here. Includes-changes-by: Takashi Iwai Signed-off-by: Stephen Warren Acked-by: Wu Fengguang Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_eld.c | 21 ++------ sound/pci/hda/patch_hdmi.c | 118 +++++++++++++++++++-------------------------- 2 files changed, 52 insertions(+), 87 deletions(-) diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c index 74b0560289c0..b05f7be9dc1b 100644 --- a/sound/pci/hda/hda_eld.c +++ b/sound/pci/hda/hda_eld.c @@ -312,23 +312,6 @@ out_fail: return -EINVAL; } -static int hdmi_eld_valid(struct hda_codec *codec, hda_nid_t nid) -{ - int eldv; - int present; - - present = snd_hda_pin_sense(codec, nid); - eldv = (present & AC_PINSENSE_ELDV); - present = (present & AC_PINSENSE_PRESENCE); - -#ifdef CONFIG_SND_DEBUG_VERBOSE - printk(KERN_INFO "HDMI: sink_present = %d, eld_valid = %d\n", - !!present, !!eldv); -#endif - - return eldv && present; -} - int snd_hdmi_get_eld_size(struct hda_codec *codec, hda_nid_t nid) { return snd_hda_codec_read(codec, nid, 0, AC_VERB_GET_HDMI_DIP_SIZE, @@ -343,7 +326,7 @@ int snd_hdmi_get_eld(struct hdmi_eld *eld, int size; unsigned char *buf; - if (!hdmi_eld_valid(codec, nid)) + if (!eld->eld_valid) return -ENOENT; size = snd_hdmi_get_eld_size(codec, nid); @@ -477,6 +460,8 @@ static void hdmi_print_eld_info(struct snd_info_entry *entry, snd_iprintf(buffer, "monitor_present\t\t%d\n", e->monitor_present); snd_iprintf(buffer, "eld_valid\t\t%d\n", e->eld_valid); + if (!e->eld_valid) + return; snd_iprintf(buffer, "monitor_name\t\t%s\n", e->monitor_name); snd_iprintf(buffer, "connection_type\t\t%s\n", eld_connection_type_names[e->conn_type]); diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 322901873222..d786ecc56801 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -78,10 +78,6 @@ struct hdmi_spec { */ struct hda_multi_out multiout; const struct hda_pcm_stream *pcm_playback; - - /* misc flags */ - /* PD bit indicates only the update, not the current state */ - unsigned int old_pin_detect:1; }; @@ -300,13 +296,6 @@ static int hda_node_index(hda_nid_t *nids, hda_nid_t nid) return -EINVAL; } -static void hdmi_get_show_eld(struct hda_codec *codec, hda_nid_t pin_nid, - struct hdmi_eld *eld) -{ - if (!snd_hdmi_get_eld(eld, codec, pin_nid)) - snd_hdmi_show_eld(eld); -} - #ifdef BE_PARANOID static void hdmi_get_dip_index(struct hda_codec *codec, hda_nid_t pin_nid, int *packet_index, int *byte_index) @@ -694,35 +683,20 @@ static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid, static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) { struct hdmi_spec *spec = codec->spec; - int tag = res >> AC_UNSOL_RES_TAG_SHIFT; - int pind = !!(res & AC_UNSOL_RES_PD); + int pin_nid = res >> AC_UNSOL_RES_TAG_SHIFT; + int pd = !!(res & AC_UNSOL_RES_PD); int eldv = !!(res & AC_UNSOL_RES_ELDV); int index; printk(KERN_INFO "HDMI hot plug event: Pin=%d Presence_Detect=%d ELD_Valid=%d\n", - tag, pind, eldv); + pin_nid, pd, eldv); - index = hda_node_index(spec->pin, tag); + index = hda_node_index(spec->pin, pin_nid); if (index < 0) return; - if (spec->old_pin_detect) { - if (pind) - hdmi_present_sense(codec, tag, &spec->sink_eld[index]); - pind = spec->sink_eld[index].monitor_present; - } - - spec->sink_eld[index].monitor_present = pind; - spec->sink_eld[index].eld_valid = eldv; - - if (pind && eldv) { - hdmi_get_show_eld(codec, spec->pin[index], - &spec->sink_eld[index]); - /* TODO: do real things about ELD */ - } - - snd_hda_input_jack_report(codec, tag); + hdmi_present_sense(codec, pin_nid, &spec->sink_eld[index]); } static void hdmi_non_intrinsic_event(struct hda_codec *codec, unsigned int res) @@ -903,13 +877,33 @@ static int hdmi_read_pin_conn(struct hda_codec *codec, hda_nid_t pin_nid) static void hdmi_present_sense(struct hda_codec *codec, hda_nid_t pin_nid, struct hdmi_eld *eld) { + /* + * Always execute a GetPinSense verb here, even when called from + * hdmi_intrinsic_event; for some NVIDIA HW, the unsolicited + * response's PD bit is not the real PD value, but indicates that + * the real PD value changed. An older version of the HD-audio + * specification worked this way. Hence, we just ignore the data in + * the unsolicited response to avoid custom WARs. + */ int present = snd_hda_pin_sense(codec, pin_nid); + memset(eld, 0, sizeof(*eld)); + eld->monitor_present = !!(present & AC_PINSENSE_PRESENCE); - eld->eld_valid = !!(present & AC_PINSENSE_ELDV); + if (eld->monitor_present) + eld->eld_valid = !!(present & AC_PINSENSE_ELDV); + else + eld->eld_valid = 0; - if (present & AC_PINSENSE_ELDV) - hdmi_get_show_eld(codec, pin_nid, eld); + printk(KERN_INFO + "HDMI status: Pin=%d Presence_Detect=%d ELD_Valid=%d\n", + pin_nid, eld->monitor_present, eld->eld_valid); + + if (eld->eld_valid) + if (!snd_hdmi_get_eld(eld, codec, pin_nid)) + snd_hdmi_show_eld(eld); + + snd_hda_input_jack_report(codec, pin_nid); } static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) @@ -927,7 +921,6 @@ static int hdmi_add_pin(struct hda_codec *codec, hda_nid_t pin_nid) SND_JACK_VIDEOOUT, NULL); if (err < 0) return err; - snd_hda_input_jack_report(codec, pin_nid); hdmi_present_sense(codec, pin_nid, &spec->sink_eld[spec->num_pins]); @@ -1490,18 +1483,6 @@ static const struct hda_codec_ops nvhdmi_patch_ops_2ch = { .free = generic_hdmi_free, }; -static int patch_nvhdmi_8ch_89(struct hda_codec *codec) -{ - struct hdmi_spec *spec; - int err = patch_generic_hdmi(codec); - - if (err < 0) - return err; - spec = codec->spec; - spec->old_pin_detect = 1; - return 0; -} - static int patch_nvhdmi_2ch(struct hda_codec *codec) { struct hdmi_spec *spec; @@ -1515,7 +1496,6 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec) spec->multiout.num_dacs = 0; /* no analog */ spec->multiout.max_channels = 2; spec->multiout.dig_out_nid = nvhdmi_master_con_nid_7x; - spec->old_pin_detect = 1; spec->num_cvts = 1; spec->cvt[0] = nvhdmi_master_con_nid_7x; spec->pcm_playback = &nvhdmi_pcm_playback_2ch; @@ -1658,28 +1638,28 @@ static const struct hda_codec_preset snd_hda_preset_hdmi[] = { { .id = 0x10de0005, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x }, { .id = 0x10de0006, .name = "MCP77/78 HDMI", .patch = patch_nvhdmi_8ch_7x }, { .id = 0x10de0007, .name = "MCP79/7A HDMI", .patch = patch_nvhdmi_8ch_7x }, -{ .id = 0x10de000a, .name = "GPU 0a HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de000b, .name = "GPU 0b HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de000c, .name = "MCP89 HDMI", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de000d, .name = "GPU 0d HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0010, .name = "GPU 10 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0011, .name = "GPU 11 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0012, .name = "GPU 12 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0013, .name = "GPU 13 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0014, .name = "GPU 14 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0015, .name = "GPU 15 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0016, .name = "GPU 16 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, +{ .id = 0x10de000a, .name = "GPU 0a HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de000b, .name = "GPU 0b HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de000c, .name = "MCP89 HDMI", .patch = patch_generic_hdmi }, +{ .id = 0x10de000d, .name = "GPU 0d HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0010, .name = "GPU 10 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0011, .name = "GPU 11 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0012, .name = "GPU 12 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0013, .name = "GPU 13 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0014, .name = "GPU 14 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0015, .name = "GPU 15 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0016, .name = "GPU 16 HDMI/DP", .patch = patch_generic_hdmi }, /* 17 is known to be absent */ -{ .id = 0x10de0018, .name = "GPU 18 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0019, .name = "GPU 19 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de001a, .name = "GPU 1a HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de001b, .name = "GPU 1b HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de001c, .name = "GPU 1c HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0040, .name = "GPU 40 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0041, .name = "GPU 41 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0042, .name = "GPU 42 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0043, .name = "GPU 43 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, -{ .id = 0x10de0044, .name = "GPU 44 HDMI/DP", .patch = patch_nvhdmi_8ch_89 }, +{ .id = 0x10de0018, .name = "GPU 18 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0019, .name = "GPU 19 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de001a, .name = "GPU 1a HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de001b, .name = "GPU 1b HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de001c, .name = "GPU 1c HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0040, .name = "GPU 40 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0041, .name = "GPU 41 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0042, .name = "GPU 42 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0043, .name = "GPU 43 HDMI/DP", .patch = patch_generic_hdmi }, +{ .id = 0x10de0044, .name = "GPU 44 HDMI/DP", .patch = patch_generic_hdmi }, { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch }, { .id = 0x10de8001, .name = "MCP73 HDMI", .patch = patch_nvhdmi_2ch }, { .id = 0x80860054, .name = "IbexPeak HDMI", .patch = patch_generic_hdmi }, -- cgit v1.2.3 From af4ccf4f86c0008bdbe2532c110d45919983b468 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 May 2011 07:33:20 +0200 Subject: ALSA: hda - Use model=auto for Lenovo G555 The new auto-parser fixes problems on Lenovo G555. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_conexant.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 24fa31e46608..3e6b9a8539c2 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -3100,6 +3100,7 @@ static const struct snd_pci_quirk cxt5066_cfg_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT5066_THINKPAD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo U350", CXT5066_ASUS), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo G560", CXT5066_ASUS), + SND_PCI_QUIRK(0x17aa, 0x3938, "Lenovo G565", CXT5066_AUTO), SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT5066_IDEAPAD), /* Fallback for Lenovos without dock mic */ {} }; -- cgit v1.2.3 From 5875c2cb7633ca280c2ece43389d6a6f3c00e951 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 May 2011 09:08:59 +0200 Subject: ALSA: usb-audio: move assignment of chip->ctrl_intf This is needed for upcoming changes to the quirks mechanism. Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/card.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index a90662af2d6b..84a5ce70a2b0 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -492,14 +492,6 @@ static void *snd_usb_audio_probe(struct usb_device *dev, } } - chip->txfr_quirk = 0; - err = 1; /* continue */ - if (quirk && quirk->ifnum != QUIRK_NO_INTERFACE) { - /* need some special handlings */ - if ((err = snd_usb_create_quirk(chip, intf, &usb_audio_driver, quirk)) < 0) - goto __error; - } - /* * For devices with more than one control interface, we assume the * first contains the audio controls. We might need a more specific @@ -508,6 +500,14 @@ static void *snd_usb_audio_probe(struct usb_device *dev, if (!chip->ctrl_intf) chip->ctrl_intf = alts; + chip->txfr_quirk = 0; + err = 1; /* continue */ + if (quirk && quirk->ifnum != QUIRK_NO_INTERFACE) { + /* need some special handlings */ + if ((err = snd_usb_create_quirk(chip, intf, &usb_audio_driver, quirk)) < 0) + goto __error; + } + if (err > 0) { /* create normal USB audio interfaces */ if (snd_usb_create_streams(chip, ifnum) < 0 || -- cgit v1.2.3 From ef9d59708949b2012b1b723a1eaec82981c40013 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 May 2011 09:09:00 +0200 Subject: ALSA: usb-audio: rework add_control_to_empty() This patch renames add_control_to_empty() to snd_usb_mixer_add_control() and exports it, so the quirks functions can make use of it. Also, as "struct mixer_build" is private to mixer.c, rewrite the function to take an argument of type "struct usb_mixer_interface" instead. Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/mixer.c | 19 ++++++++++--------- sound/usb/mixer.h | 3 +++ 2 files changed, 13 insertions(+), 9 deletions(-) diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index eab06edcc9b7..ba19bfdfdc9e 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -535,20 +535,21 @@ static int check_matrix_bitmap(unsigned char *bmap, int ich, int och, int num_ou * if failed, give up and free the control instance. */ -static int add_control_to_empty(struct mixer_build *state, struct snd_kcontrol *kctl) +int snd_usb_mixer_add_control(struct usb_mixer_interface *mixer, + struct snd_kcontrol *kctl) { struct usb_mixer_elem_info *cval = kctl->private_data; int err; - while (snd_ctl_find_id(state->chip->card, &kctl->id)) + while (snd_ctl_find_id(mixer->chip->card, &kctl->id)) kctl->id.index++; - if ((err = snd_ctl_add(state->chip->card, kctl)) < 0) { + if ((err = snd_ctl_add(mixer->chip->card, kctl)) < 0) { snd_printd(KERN_ERR "cannot add control (err = %d)\n", err); return err; } cval->elem_id = &kctl->id; - cval->next_id_elem = state->mixer->id_elems[cval->id]; - state->mixer->id_elems[cval->id] = cval; + cval->next_id_elem = mixer->id_elems[cval->id]; + mixer->id_elems[cval->id] = cval; return 0; } @@ -1176,7 +1177,7 @@ static void build_feature_ctl(struct mixer_build *state, void *raw_desc, snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n", cval->id, kctl->id.name, cval->channels, cval->min, cval->max, cval->res); - add_control_to_empty(state, kctl); + snd_usb_mixer_add_control(state->mixer, kctl); } @@ -1340,7 +1341,7 @@ static void build_mixer_unit_ctl(struct mixer_build *state, snd_printdd(KERN_INFO "[%d] MU [%s] ch = %d, val = %d/%d\n", cval->id, kctl->id.name, cval->channels, cval->min, cval->max); - add_control_to_empty(state, kctl); + snd_usb_mixer_add_control(state->mixer, kctl); } @@ -1641,7 +1642,7 @@ static int build_audio_procunit(struct mixer_build *state, int unitid, void *raw snd_printdd(KERN_INFO "[%d] PU [%s] ch = %d, val = %d/%d\n", cval->id, kctl->id.name, cval->channels, cval->min, cval->max); - if ((err = add_control_to_empty(state, kctl)) < 0) + if ((err = snd_usb_mixer_add_control(state->mixer, kctl)) < 0) return err; } return 0; @@ -1858,7 +1859,7 @@ static int parse_audio_selector_unit(struct mixer_build *state, int unitid, void snd_printdd(KERN_INFO "[%d] SU [%s] items = %d\n", cval->id, kctl->id.name, desc->bNrInPins); - if ((err = add_control_to_empty(state, kctl)) < 0) + if ((err = snd_usb_mixer_add_control(state->mixer, kctl)) < 0) return err; return 0; diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h index b4a2c8165e4b..459551ac53ae 100644 --- a/sound/usb/mixer.h +++ b/sound/usb/mixer.h @@ -55,4 +55,7 @@ int snd_usb_mixer_set_ctl_value(struct usb_mixer_elem_info *cval, void snd_usb_mixer_inactivate(struct usb_mixer_interface *mixer); int snd_usb_mixer_activate(struct usb_mixer_interface *mixer); +int snd_usb_mixer_add_control(struct usb_mixer_interface *mixer, + struct snd_kcontrol *kctl); + #endif /* __USBMIXER_H */ -- cgit v1.2.3 From 9e38658f703732cb69936553cef4bdb4e5294f3f Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 May 2011 09:09:01 +0200 Subject: ALSA: usb-audio: export snd_usb_feature_unit_ctl In order to allow quirks functions to hook up to the standard feature unit op tables, this patch exports a pointer to the struct that is used internally. That way, all the code handling the control can be kept private, and external code can reference the symbol to re-use it. Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/card.c | 1 + sound/usb/mixer.c | 13 +++---------- sound/usb/mixer.h | 11 ++++++++++- sound/usb/quirks.c | 1 + 4 files changed, 15 insertions(+), 11 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index 84a5ce70a2b0..220c6167dd86 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -48,6 +48,7 @@ #include #include +#include #include #include #include diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c index ba19bfdfdc9e..c22fa76e363a 100644 --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -86,16 +86,6 @@ struct mixer_build { const struct usbmix_selector_map *selector_map; }; -enum { - USB_MIXER_BOOLEAN, - USB_MIXER_INV_BOOLEAN, - USB_MIXER_S8, - USB_MIXER_U8, - USB_MIXER_S16, - USB_MIXER_U16, -}; - - /*E-mu 0202/0404/0204 eXtension Unit(XU) control*/ enum { USB_XU_CLOCK_RATE = 0xe301, @@ -985,6 +975,9 @@ static struct snd_kcontrol_new usb_feature_unit_ctl_ro = { .put = NULL, }; +/* This symbol is exported in order to allow the mixer quirks to + * hook up to the standard feature unit control mechanism */ +struct snd_kcontrol_new *snd_usb_feature_unit_ctl = &usb_feature_unit_ctl; /* * build a feature control diff --git a/sound/usb/mixer.h b/sound/usb/mixer.h index 459551ac53ae..ae1a14dcfe82 100644 --- a/sound/usb/mixer.h +++ b/sound/usb/mixer.h @@ -24,7 +24,16 @@ struct usb_mixer_interface { u8 xonar_u1_status; }; -#define MAX_CHANNELS 10 /* max logical channels */ +#define MAX_CHANNELS 16 /* max logical channels */ + +enum { + USB_MIXER_BOOLEAN, + USB_MIXER_INV_BOOLEAN, + USB_MIXER_S8, + USB_MIXER_U8, + USB_MIXER_S16, + USB_MIXER_U16, +}; struct usb_mixer_elem_info { struct usb_mixer_interface *mixer; diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index bd13d7257240..2546dc808e43 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3 From 014950b013b7966b7e4a3ae6931c75e3c115296f Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 May 2011 09:09:02 +0200 Subject: ALSA: usb-audio: add new quirk type QUIRK_AUDIO_STANDARD_MIXER This quirk type will let the driver assume that there is a standard mixer on a given interface, or that a specific mixer quirks will handle the device. Signed-off-by: Daniel Mack Signed-off-by: Takashi Iwai --- sound/usb/quirks.c | 17 ++++++++++++++++- sound/usb/usbaudio.h | 1 + 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 2546dc808e43..2e969cbb393b 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -263,6 +263,20 @@ static int create_uaxx_quirk(struct snd_usb_audio *chip, return 0; } +/* + * Create a standard mixer for the specified interface. + */ +static int create_standard_mixer_quirk(struct snd_usb_audio *chip, + struct usb_interface *iface, + struct usb_driver *driver, + const struct snd_usb_audio_quirk *quirk) +{ + if (quirk->ifnum < 0) + return 0; + + return snd_usb_create_mixer(chip, quirk->ifnum, 0); +} + /* * audio-interface quirks * @@ -295,7 +309,8 @@ int snd_usb_create_quirk(struct snd_usb_audio *chip, [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk, - [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk + [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk, + [QUIRK_AUDIO_STANDARD_MIXER] = create_standard_mixer_quirk, }; if (quirk->type < QUIRK_TYPE_COUNT) { diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 32f2a97f2f14..1e79986b5777 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -84,6 +84,7 @@ enum quirk_type { QUIRK_AUDIO_FIXED_ENDPOINT, QUIRK_AUDIO_EDIROL_UAXX, QUIRK_AUDIO_ALIGN_TRANSFER, + QUIRK_AUDIO_STANDARD_MIXER, QUIRK_TYPE_COUNT }; -- cgit v1.2.3 From d5a0bf6cc526d326283983bb7935493b722e7063 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 25 May 2011 09:09:03 +0200 Subject: ALSA: usb-audio: more control quirks for M-Audio FastTrack devices Make use of the freshly introduced methods to re-use standard mixer handling and add some controls that are hidden but implemented in a standard conform way on M-Audio's FastTrack devices. Signed-off-by: Daniel Mack Original-code-by: Felix Homann Signed-off-by: Takashi Iwai --- sound/usb/mixer_quirks.c | 70 ++++++++++++++++++++++++++++++++++++++++++++++++ sound/usb/quirks-table.h | 4 +-- 2 files changed, 72 insertions(+), 2 deletions(-) diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c index 9146cffa6ede..3d0f4873112b 100644 --- a/sound/usb/mixer_quirks.c +++ b/sound/usb/mixer_quirks.c @@ -40,6 +40,8 @@ #include "mixer_quirks.h" #include "helper.h" +extern struct snd_kcontrol_new *snd_usb_feature_unit_ctl; + /* * Sound Blaster remote control configuration * @@ -492,6 +494,69 @@ static int snd_nativeinstruments_create_mixer(struct usb_mixer_interface *mixer, return err; } +/* M-Audio FastTrack Ultra quirks */ + +/* private_free callback */ +static void usb_mixer_elem_free(struct snd_kcontrol *kctl) +{ + kfree(kctl->private_data); + kctl->private_data = NULL; +} + +static int snd_maudio_ftu_create_ctl(struct usb_mixer_interface *mixer, + int in, int out, const char *name) +{ + struct usb_mixer_elem_info *cval; + struct snd_kcontrol *kctl; + + cval = kzalloc(sizeof(*cval), GFP_KERNEL); + if (!cval) + return -ENOMEM; + + cval->id = 5; + cval->mixer = mixer; + cval->val_type = USB_MIXER_S16; + cval->channels = 1; + cval->control = out + 1; + cval->cmask = 1 << in; + + kctl = snd_ctl_new1(snd_usb_feature_unit_ctl, cval); + if (!kctl) { + kfree(cval); + return -ENOMEM; + } + + snprintf(kctl->id.name, sizeof(kctl->id.name), name); + kctl->private_free = usb_mixer_elem_free; + return snd_usb_mixer_add_control(mixer, kctl); +} + +static int snd_maudio_ftu_create_mixer(struct usb_mixer_interface *mixer) +{ + char name[64]; + int in, out, err; + + for (out = 0; out < 8; out++) { + for (in = 0; in < 8; in++) { + snprintf(name, sizeof(name), + "AIn%d - Out%d Capture Volume", in + 1, out + 1); + err = snd_maudio_ftu_create_ctl(mixer, in, out, name); + if (err < 0) + return err; + } + + for (in = 8; in < 16; in++) { + snprintf(name, sizeof(name), + "DIn%d - Out%d Playback Volume", in - 7, out + 1); + err = snd_maudio_ftu_create_ctl(mixer, in, out, name); + if (err < 0) + return err; + } + } + + return 0; +} + void snd_emuusb_set_samplerate(struct snd_usb_audio *chip, unsigned char samplerate_id) { @@ -533,6 +598,11 @@ int snd_usb_mixer_apply_create_quirk(struct usb_mixer_interface *mixer) snd_audigy2nx_proc_read); break; + case USB_ID(0x0763, 0x2080): /* M-Audio Fast Track Ultra */ + case USB_ID(0x0763, 0x2081): /* M-Audio Fast Track Ultra 8R */ + err = snd_maudio_ftu_create_mixer(mixer); + break; + case USB_ID(0x0b05, 0x1739): case USB_ID(0x0b05, 0x1743): err = snd_xonar_u1_controls_create(mixer); diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 78792a8900c3..0b2ae8e1c02d 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -1988,7 +1988,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .data = & (const struct snd_usb_audio_quirk[]) { { .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE + .type = QUIRK_AUDIO_STANDARD_MIXER, }, { .ifnum = 1, @@ -2055,7 +2055,7 @@ YAMAHA_DEVICE(0x7010, "UB99"), .data = & (const struct snd_usb_audio_quirk[]) { { .ifnum = 0, - .type = QUIRK_IGNORE_INTERFACE + .type = QUIRK_AUDIO_STANDARD_MIXER, }, { .ifnum = 1, -- cgit v1.2.3 From a331b0c3665506aa23bfc78c777199b30349d731 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 25 May 2011 09:48:48 +0200 Subject: MAINTAINERS: add FireWire audio maintainer Add the maintainer of the FireWire audio drivers. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 6e6454746540..c3106cd266e9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2582,6 +2582,13 @@ S: Maintained F: drivers/hwmon/f75375s.c F: include/linux/f75375s.h +FIREWIRE AUDIO DRIVERS +M: Clemens Ladisch +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +T: git git://git.alsa-project.org/alsa-kernel.git +S: Maintained +F: sound/firewire/ + FIREWIRE SUBSYSTEM M: Stefan Richter L: linux1394-devel@lists.sourceforge.net -- cgit v1.2.3 From f90e5b5b136ede1f0fd15999e95f13124d6b0dbd Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Tue, 24 May 2011 10:44:42 -0400 Subject: GFS2: Processes waiting on inode glock that no processes are holding This patch fixes a race in the GFS2 glock state machine that may result in lockups. The symptom is that all nodes but one will hang, waiting for a particular glock. All the holder records will have the "W" (Waiting) bit set. The other node will typically have the glock stuck in Exclusive mode (EX) with no holder records, but the dinode will be cached. In other words, an entry with "I:" will appear in the glock dump for that glock, but nothing else. The race has to do with the glock "Pending Demote" bit, which can be set, then immediately reset, thus losing the fact that another node needs the glock. The sequence of events is: 1. Something schedules the glock workqueue (e.g. glock request from fs) 2. The glock workqueue gets to the point between the test of the reply pending bit and the spin lock: if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags)) { finish_xmote(gl, gl->gl_reply); drop_ref = 1; } down_read(&gfs2_umount_flush_sem); <---- i.e. here spin_lock(&gl->gl_spin); 3. In comes (a) the reply to our EX lock request setting GLF_REPLY_PENDING and (b) the demote request which sets GLF_PENDING_DEMOTE 4. The following test is executed: if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && gl->gl_state != LM_ST_UNLOCKED && gl->gl_demote_state != LM_ST_EXCLUSIVE) { This resets the pending demote flag, and gl->gl_demote_state is not equal to exclusive, however because the reply from the dlm arrived after we checked for the GLF_REPLY_PENDING flag, gl->gl_state is still equal to unlocked, so although we reset the GLF_PENDING_DEMOTE flag, we didn't then set the GLF_DEMOTE flag or reinstate the GLF_PENDING_DEMOTE_FLAG. The patch closes the timing window by only transitioning the "Pending demote" bit to the "demote" flag once we know the other conditions (not unlocked and not exclusive) are met. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/glock.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c index a2a6abbccc07..7137750f17f0 100644 --- a/fs/gfs2/glock.c +++ b/fs/gfs2/glock.c @@ -663,14 +663,19 @@ static void glock_work_func(struct work_struct *work) drop_ref = 1; } spin_lock(&gl->gl_spin); - if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && + if (test_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) && gl->gl_state != LM_ST_UNLOCKED && gl->gl_demote_state != LM_ST_EXCLUSIVE) { unsigned long holdtime, now = jiffies; + holdtime = gl->gl_tchange + gl->gl_ops->go_min_hold_time; if (time_before(now, holdtime)) delay = holdtime - now; - set_bit(delay ? GLF_PENDING_DEMOTE : GLF_DEMOTE, &gl->gl_flags); + + if (!delay) { + clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags); + set_bit(GLF_DEMOTE, &gl->gl_flags); + } } run_queue(gl, 0); spin_unlock(&gl->gl_spin); -- cgit v1.2.3 From bc125106f8afe15ffb0aae70d9b72bebec46e519 Mon Sep 17 00:00:00 2001 From: "HeungJun, Kim" Date: Fri, 20 May 2011 02:27:28 -0300 Subject: [media] Add support for M-5MOLS 8 Mega Pixel camera ISP Add I2C/V4L2 subdev driver for M-5MOLS integrated image signal processor with 8 Mega Pixel sensor. Signed-off-by: HeungJun, Kim Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 2 + drivers/media/video/Makefile | 1 + drivers/media/video/m5mols/Kconfig | 5 + drivers/media/video/m5mols/Makefile | 3 + drivers/media/video/m5mols/m5mols.h | 296 ++++++++ drivers/media/video/m5mols/m5mols_capture.c | 191 +++++ drivers/media/video/m5mols/m5mols_controls.c | 299 ++++++++ drivers/media/video/m5mols/m5mols_core.c | 1004 ++++++++++++++++++++++++++ drivers/media/video/m5mols/m5mols_reg.h | 399 ++++++++++ include/media/m5mols.h | 35 + 10 files changed, 2235 insertions(+) create mode 100644 drivers/media/video/m5mols/Kconfig create mode 100644 drivers/media/video/m5mols/Makefile create mode 100644 drivers/media/video/m5mols/m5mols.h create mode 100644 drivers/media/video/m5mols/m5mols_capture.c create mode 100644 drivers/media/video/m5mols/m5mols_controls.c create mode 100644 drivers/media/video/m5mols/m5mols_core.c create mode 100644 drivers/media/video/m5mols/m5mols_reg.h create mode 100644 include/media/m5mols.h diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 3be180b3ba27..47bfd323a9e5 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -757,6 +757,8 @@ config VIDEO_NOON010PC30 ---help--- This driver supports NOON010PC30 CIF camera from Siliconfile +source "drivers/media/video/m5mols/Kconfig" + config VIDEO_OMAP3 tristate "OMAP 3 Camera support (EXPERIMENTAL)" select OMAP_IOMMU diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 9519160c2e01..f0fecd6f6a33 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_VIDEO_MT9V011) += mt9v011.o obj-$(CONFIG_VIDEO_MT9V032) += mt9v032.o obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o obj-$(CONFIG_VIDEO_NOON010PC30) += noon010pc30.o +obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/ obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o diff --git a/drivers/media/video/m5mols/Kconfig b/drivers/media/video/m5mols/Kconfig new file mode 100644 index 000000000000..302dc3d70193 --- /dev/null +++ b/drivers/media/video/m5mols/Kconfig @@ -0,0 +1,5 @@ +config VIDEO_M5MOLS + tristate "Fujitsu M-5MOLS 8MP sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + ---help--- + This driver supports Fujitsu M-5MOLS camera sensor with ISP diff --git a/drivers/media/video/m5mols/Makefile b/drivers/media/video/m5mols/Makefile new file mode 100644 index 000000000000..0a44e028edc7 --- /dev/null +++ b/drivers/media/video/m5mols/Makefile @@ -0,0 +1,3 @@ +m5mols-objs := m5mols_core.o m5mols_controls.o m5mols_capture.o + +obj-$(CONFIG_VIDEO_M5MOLS) += m5mols.o diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h new file mode 100644 index 000000000000..10b55c854487 --- /dev/null +++ b/drivers/media/video/m5mols/m5mols.h @@ -0,0 +1,296 @@ +/* + * Header for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim, riverful.kim@samsung.com + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef M5MOLS_H +#define M5MOLS_H + +#include +#include "m5mols_reg.h" + +extern int m5mols_debug; + +#define to_m5mols(__sd) container_of(__sd, struct m5mols_info, sd) + +#define to_sd(__ctrl) \ + (&container_of(__ctrl->handler, struct m5mols_info, handle)->sd) + +enum m5mols_restype { + M5MOLS_RESTYPE_MONITOR, + M5MOLS_RESTYPE_CAPTURE, + M5MOLS_RESTYPE_MAX, +}; + +/** + * struct m5mols_resolution - structure for the resolution + * @type: resolution type according to the pixel code + * @width: width of the resolution + * @height: height of the resolution + * @reg: resolution preset register value + */ +struct m5mols_resolution { + u8 reg; + enum m5mols_restype type; + u16 width; + u16 height; +}; + +/** + * struct m5mols_exif - structure for the EXIF information of M-5MOLS + * @exposure_time: exposure time register value + * @shutter_speed: speed of the shutter register value + * @aperture: aperture register value + * @exposure_bias: it calls also EV bias + * @iso_speed: ISO register value + * @flash: status register value of the flash + * @sdr: status register value of the Subject Distance Range + * @qval: not written exact meaning in document + */ +struct m5mols_exif { + u32 exposure_time; + u32 shutter_speed; + u32 aperture; + u32 brightness; + u32 exposure_bias; + u16 iso_speed; + u16 flash; + u16 sdr; + u16 qval; +}; + +/** + * struct m5mols_capture - Structure for the capture capability + * @exif: EXIF information + * @main: size in bytes of the main image + * @thumb: size in bytes of the thumb image, if it was accompanied + * @total: total size in bytes of the produced image + */ +struct m5mols_capture { + struct m5mols_exif exif; + u32 main; + u32 thumb; + u32 total; +}; + +/** + * struct m5mols_scenemode - structure for the scenemode capability + * @metering: metering light register value + * @ev_bias: EV bias register value + * @wb_mode: mode which means the WhiteBalance is Auto or Manual + * @wb_preset: whitebalance preset register value in the Manual mode + * @chroma_en: register value whether the Chroma capability is enabled or not + * @chroma_lvl: chroma's level register value + * @edge_en: register value Whether the Edge capability is enabled or not + * @edge_lvl: edge's level register value + * @af_range: Auto Focus's range + * @fd_mode: Face Detection mode + * @mcc: Multi-axis Color Conversion which means emotion color + * @light: status of the Light + * @flash: status of the Flash + * @tone: Tone color which means Contrast + * @iso: ISO register value + * @capt_mode: Mode of the Image Stabilization while the camera capturing + * @wdr: Wide Dynamic Range register value + * + * The each value according to each scenemode is recommended in the documents. + */ +struct m5mols_scenemode { + u32 metering; + u32 ev_bias; + u32 wb_mode; + u32 wb_preset; + u32 chroma_en; + u32 chroma_lvl; + u32 edge_en; + u32 edge_lvl; + u32 af_range; + u32 fd_mode; + u32 mcc; + u32 light; + u32 flash; + u32 tone; + u32 iso; + u32 capt_mode; + u32 wdr; +}; + +/** + * struct m5mols_version - firmware version information + * @customer: customer information + * @project: version of project information according to customer + * @fw: firmware revision + * @hw: hardware revision + * @param: version of the parameter + * @awb: Auto WhiteBalance algorithm version + * @str: information about manufacturer and packaging vendor + * @af: Auto Focus version + * + * The register offset starts the customer version at 0x0, and it ends + * the awb version at 0x09. The customer, project information occupies 1 bytes + * each. And also the fw, hw, param, awb each requires 2 bytes. The str is + * unique string associated with firmware's version. It includes information + * about manufacturer and the vendor of the sensor's packaging. The least + * significant 2 bytes of the string indicate packaging manufacturer. + */ +#define VERSION_STRING_SIZE 22 +struct m5mols_version { + u8 customer; + u8 project; + u16 fw; + u16 hw; + u16 param; + u16 awb; + u8 str[VERSION_STRING_SIZE]; + u8 af; +}; +#define VERSION_SIZE sizeof(struct m5mols_version) + +/** + * struct m5mols_info - M-5MOLS driver data structure + * @pdata: platform data + * @sd: v4l-subdev instance + * @pad: media pad + * @ffmt: current fmt according to resolution type + * @res_type: current resolution type + * @code: current code + * @irq_waitq: waitqueue for the capture + * @work_irq: workqueue for the IRQ + * @flags: state variable for the interrupt handler + * @handle: control handler + * @autoexposure: Auto Exposure control + * @exposure: Exposure control + * @autowb: Auto White Balance control + * @colorfx: Color effect control + * @saturation: Saturation control + * @zoom: Zoom control + * @ver: information of the version + * @cap: the capture mode attributes + * @power: current sensor's power status + * @ctrl_sync: true means all controls of the sensor are initialized + * @int_capture: true means the capture interrupt is issued once + * @lock_ae: true means the Auto Exposure is locked + * @lock_awb: true means the Aut WhiteBalance is locked + * @resolution: register value for current resolution + * @interrupt: register value for current interrupt status + * @mode: register value for current operation mode + * @mode_save: register value for current operation mode for saving + * @set_power: optional power callback to the board code + */ +struct m5mols_info { + const struct m5mols_platform_data *pdata; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX]; + int res_type; + enum v4l2_mbus_pixelcode code; + wait_queue_head_t irq_waitq; + struct work_struct work_irq; + unsigned long flags; + + struct v4l2_ctrl_handler handle; + /* Autoexposure/exposure control cluster */ + struct { + struct v4l2_ctrl *autoexposure; + struct v4l2_ctrl *exposure; + }; + struct v4l2_ctrl *autowb; + struct v4l2_ctrl *colorfx; + struct v4l2_ctrl *saturation; + struct v4l2_ctrl *zoom; + + struct m5mols_version ver; + struct m5mols_capture cap; + bool power; + bool ctrl_sync; + bool lock_ae; + bool lock_awb; + u8 resolution; + u32 interrupt; + u32 mode; + u32 mode_save; + int (*set_power)(struct device *dev, int on); +}; + +#define ST_CAPT_IRQ 0 + +#define is_powered(__info) (__info->power) +#define is_ctrl_synced(__info) (__info->ctrl_sync) +#define is_available_af(__info) (__info->ver.af) +#define is_code(__code, __type) (__code == m5mols_default_ffmt[__type].code) +#define is_manufacturer(__info, __manufacturer) \ + (__info->ver.str[0] == __manufacturer[0] && \ + __info->ver.str[1] == __manufacturer[1]) +/* + * I2C operation of the M-5MOLS + * + * The I2C read operation of the M-5MOLS requires 2 messages. The first + * message sends the information about the command, command category, and total + * message size. The second message is used to retrieve the data specifed in + * the first message + * + * 1st message 2nd message + * +-------+---+----------+-----+-------+ +------+------+------+------+ + * | size1 | R | category | cmd | size2 | | d[0] | d[1] | d[2] | d[3] | + * +-------+---+----------+-----+-------+ +------+------+------+------+ + * - size1: message data size(5 in this case) + * - size2: desired buffer size of the 2nd message + * - d[0..3]: according to size2 + * + * The I2C write operation needs just one message. The message includes + * category, command, total size, and desired data. + * + * 1st message + * +-------+---+----------+-----+------+------+------+------+ + * | size1 | W | category | cmd | d[0] | d[1] | d[2] | d[3] | + * +-------+---+----------+-----+------+------+------+------+ + * - d[0..3]: according to size1 + */ +int m5mols_read(struct v4l2_subdev *sd, u32 reg_comb, u32 *val); +int m5mols_write(struct v4l2_subdev *sd, u32 reg_comb, u32 val); +int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 value); + +/* + * Mode operation of the M-5MOLS + * + * Changing the mode of the M-5MOLS is needed right executing order. + * There are three modes(PARAMETER, MONITOR, CAPTURE) which can be changed + * by user. There are various categories associated with each mode. + * + * +============================================================+ + * | mode | category | + * +============================================================+ + * | FLASH | FLASH(only after Stand-by or Power-on) | + * | SYSTEM | SYSTEM(only after sensor arm-booting) | + * | PARAMETER | PARAMETER | + * | MONITOR | MONITOR(preview), Auto Focus, Face Detection | + * | CAPTURE | Single CAPTURE, Preview(recording) | + * +============================================================+ + * + * The available executing order between each modes are as follows: + * PARAMETER <---> MONITOR <---> CAPTURE + */ +int m5mols_mode(struct m5mols_info *info, u32 mode); + +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg); +int m5mols_sync_controls(struct m5mols_info *info); +int m5mols_start_capture(struct m5mols_info *info); +int m5mols_do_scenemode(struct m5mols_info *info, u32 mode); +int m5mols_lock_3a(struct m5mols_info *info, bool lock); +int m5mols_set_ctrl(struct v4l2_ctrl *ctrl); + +/* The firmware function */ +int m5mols_update_fw(struct v4l2_subdev *sd, + int (*set_power)(struct m5mols_info *, bool)); + +#endif /* M5MOLS_H */ diff --git a/drivers/media/video/m5mols/m5mols_capture.c b/drivers/media/video/m5mols/m5mols_capture.c new file mode 100644 index 000000000000..d71a3903b60f --- /dev/null +++ b/drivers/media/video/m5mols/m5mols_capture.c @@ -0,0 +1,191 @@ +/* + * The Capture code for Fujitsu M-5MOLS ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim, riverful.kim@samsung.com + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "m5mols.h" +#include "m5mols_reg.h" + +static int m5mols_capture_error_handler(struct m5mols_info *info, + int timeout) +{ + int ret; + + /* Disable all interrupts and clear relevant interrupt staus bits */ + ret = m5mols_write(&info->sd, SYSTEM_INT_ENABLE, + info->interrupt & ~(REG_INT_CAPTURE)); + if (ret) + return ret; + + if (timeout == 0) + return -ETIMEDOUT; + + return 0; +} +/** + * m5mols_read_rational - I2C read of a rational number + * + * Read numerator and denominator from registers @addr_num and @addr_den + * respectively and return the division result in @val. + */ +static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num, + u32 addr_den, u32 *val) +{ + u32 num, den; + + int ret = m5mols_read(sd, addr_num, &num); + if (!ret) + ret = m5mols_read(sd, addr_den, &den); + if (ret) + return ret; + *val = den == 0 ? 0 : num / den; + return ret; +} + +/** + * m5mols_capture_info - Gather captured image information + * + * For now it gathers only EXIF information and file size. + */ +static int m5mols_capture_info(struct m5mols_info *info) +{ + struct m5mols_exif *exif = &info->cap.exif; + struct v4l2_subdev *sd = &info->sd; + int ret; + + ret = m5mols_read_rational(sd, EXIF_INFO_EXPTIME_NU, + EXIF_INFO_EXPTIME_DE, &exif->exposure_time); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_TV_NU, EXIF_INFO_TV_DE, + &exif->shutter_speed); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_AV_NU, EXIF_INFO_AV_DE, + &exif->aperture); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_BV_NU, EXIF_INFO_BV_DE, + &exif->brightness); + if (ret) + return ret; + ret = m5mols_read_rational(sd, EXIF_INFO_EBV_NU, EXIF_INFO_EBV_DE, + &exif->exposure_bias); + if (ret) + return ret; + + ret = m5mols_read(sd, EXIF_INFO_ISO, (u32 *)&exif->iso_speed); + if (!ret) + ret = m5mols_read(sd, EXIF_INFO_FLASH, (u32 *)&exif->flash); + if (!ret) + ret = m5mols_read(sd, EXIF_INFO_SDR, (u32 *)&exif->sdr); + if (!ret) + ret = m5mols_read(sd, EXIF_INFO_QVAL, (u32 *)&exif->qval); + if (ret) + return ret; + + if (!ret) + ret = m5mols_read(sd, CAPC_IMAGE_SIZE, &info->cap.main); + if (!ret) + ret = m5mols_read(sd, CAPC_THUMB_SIZE, &info->cap.thumb); + if (!ret) + info->cap.total = info->cap.main + info->cap.thumb; + + return ret; +} + +int m5mols_start_capture(struct m5mols_info *info) +{ + struct v4l2_subdev *sd = &info->sd; + u32 resolution = info->resolution; + int timeout; + int ret; + + /* + * Preparing capture. Setting control & interrupt before entering + * capture mode + * + * 1) change to MONITOR mode for operating control & interrupt + * 2) set controls (considering v4l2_control value & lock 3A) + * 3) set interrupt + * 4) change to CAPTURE mode + */ + ret = m5mols_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_sync_controls(info); + if (!ret) + ret = m5mols_lock_3a(info, true); + if (!ret) + ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE); + if (!ret) + ret = m5mols_mode(info, REG_CAPTURE); + if (!ret) { + /* Wait for capture interrupt, after changing capture mode */ + timeout = wait_event_interruptible_timeout(info->irq_waitq, + test_bit(ST_CAPT_IRQ, &info->flags), + msecs_to_jiffies(2000)); + if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags)) + ret = m5mols_capture_error_handler(info, timeout); + } + if (!ret) + ret = m5mols_lock_3a(info, false); + if (ret) + return ret; + /* + * Starting capture. Setting capture frame count and resolution and + * the format(available format: JPEG, Bayer RAW, YUV). + * + * 1) select single or multi(enable to 25), format, size + * 2) set interrupt + * 3) start capture(for main image, now) + * 4) get information + * 5) notify file size to v4l2 device(e.g, to s5p-fimc v4l2 device) + */ + ret = m5mols_write(sd, CAPC_SEL_FRAME, 1); + if (!ret) + ret = m5mols_write(sd, CAPP_YUVOUT_MAIN, REG_JPEG); + if (!ret) + ret = m5mols_write(sd, CAPP_MAIN_IMAGE_SIZE, resolution); + if (!ret) + ret = m5mols_enable_interrupt(sd, REG_INT_CAPTURE); + if (!ret) + ret = m5mols_write(sd, CAPC_START, REG_CAP_START_MAIN); + if (!ret) { + /* Wait for the capture completion interrupt */ + timeout = wait_event_interruptible_timeout(info->irq_waitq, + test_bit(ST_CAPT_IRQ, &info->flags), + msecs_to_jiffies(2000)); + if (test_and_clear_bit(ST_CAPT_IRQ, &info->flags)) { + ret = m5mols_capture_info(info); + if (!ret) + v4l2_subdev_notify(sd, 0, &info->cap.total); + } + } + + return m5mols_capture_error_handler(info, timeout); +} diff --git a/drivers/media/video/m5mols/m5mols_controls.c b/drivers/media/video/m5mols/m5mols_controls.c new file mode 100644 index 000000000000..817c16fec368 --- /dev/null +++ b/drivers/media/video/m5mols/m5mols_controls.c @@ -0,0 +1,299 @@ +/* + * Controls for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim, riverful.kim@samsung.com + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include + +#include "m5mols.h" +#include "m5mols_reg.h" + +static struct m5mols_scenemode m5mols_default_scenemode[] = { + [REG_SCENE_NORMAL] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_NORMAL, REG_LIGHT_OFF, REG_FLASH_OFF, + 5, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_PORTRAIT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 4, + REG_AF_NORMAL, BIT_FD_EN | BIT_FD_DRAW_FACE_FRAME, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_LANDSCAPE] = { + REG_AE_ALL, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 4, REG_EDGE_ON, 6, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_SPORTS] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_PARTY_INDOOR] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 4, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_200, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_BEACH_SNOW] = { + REG_AE_CENTER, REG_AE_INDEX_10_POS, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 4, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_SUNSET] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET, + REG_AWB_DAYLIGHT, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_DAWN_DUSK] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_PRESET, + REG_AWB_FLUORESCENT_1, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_FALL] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 5, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_NIGHT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_AGAINST_LIGHT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_FIRE] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_50, REG_CAP_NONE, REG_WDR_OFF, + }, + [REG_SCENE_TEXT] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 7, + REG_AF_MACRO, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_ANTI_SHAKE, REG_WDR_ON, + }, + [REG_SCENE_CANDLE] = { + REG_AE_CENTER, REG_AE_INDEX_00, REG_AWB_AUTO, 0, + REG_CHROMA_ON, 3, REG_EDGE_ON, 5, + REG_AF_NORMAL, REG_FD_OFF, + REG_MCC_OFF, REG_LIGHT_OFF, REG_FLASH_OFF, + 6, REG_ISO_AUTO, REG_CAP_NONE, REG_WDR_OFF, + }, +}; + +/** + * m5mols_do_scenemode() - Change current scenemode + * @mode: Desired mode of the scenemode + * + * WARNING: The execution order is important. Do not change the order. + */ +int m5mols_do_scenemode(struct m5mols_info *info, u32 mode) +{ + struct v4l2_subdev *sd = &info->sd; + struct m5mols_scenemode scenemode = m5mols_default_scenemode[mode]; + int ret; + + if (mode > REG_SCENE_CANDLE) + return -EINVAL; + + ret = m5mols_lock_3a(info, false); + if (!ret) + ret = m5mols_write(sd, AE_EV_PRESET_MONITOR, mode); + if (!ret) + ret = m5mols_write(sd, AE_EV_PRESET_CAPTURE, mode); + if (!ret) + ret = m5mols_write(sd, AE_MODE, scenemode.metering); + if (!ret) + ret = m5mols_write(sd, AE_INDEX, scenemode.ev_bias); + if (!ret) + ret = m5mols_write(sd, AWB_MODE, scenemode.wb_mode); + if (!ret) + ret = m5mols_write(sd, AWB_MANUAL, scenemode.wb_preset); + if (!ret) + ret = m5mols_write(sd, MON_CHROMA_EN, scenemode.chroma_en); + if (!ret) + ret = m5mols_write(sd, MON_CHROMA_LVL, scenemode.chroma_lvl); + if (!ret) + ret = m5mols_write(sd, MON_EDGE_EN, scenemode.edge_en); + if (!ret) + ret = m5mols_write(sd, MON_EDGE_LVL, scenemode.edge_lvl); + if (!ret && is_available_af(info)) + ret = m5mols_write(sd, AF_MODE, scenemode.af_range); + if (!ret && is_available_af(info)) + ret = m5mols_write(sd, FD_CTL, scenemode.fd_mode); + if (!ret) + ret = m5mols_write(sd, MON_TONE_CTL, scenemode.tone); + if (!ret) + ret = m5mols_write(sd, AE_ISO, scenemode.iso); + if (!ret) + ret = m5mols_mode(info, REG_CAPTURE); + if (!ret) + ret = m5mols_write(sd, CAPP_WDR_EN, scenemode.wdr); + if (!ret) + ret = m5mols_write(sd, CAPP_MCC_MODE, scenemode.mcc); + if (!ret) + ret = m5mols_write(sd, CAPP_LIGHT_CTRL, scenemode.light); + if (!ret) + ret = m5mols_write(sd, CAPP_FLASH_CTRL, scenemode.flash); + if (!ret) + ret = m5mols_write(sd, CAPC_MODE, scenemode.capt_mode); + if (!ret) + ret = m5mols_mode(info, REG_MONITOR); + + return ret; +} + +static int m5mols_lock_ae(struct m5mols_info *info, bool lock) +{ + int ret = 0; + + if (info->lock_ae != lock) + ret = m5mols_write(&info->sd, AE_LOCK, + lock ? REG_AE_LOCK : REG_AE_UNLOCK); + if (!ret) + info->lock_ae = lock; + + return ret; +} + +static int m5mols_lock_awb(struct m5mols_info *info, bool lock) +{ + int ret = 0; + + if (info->lock_awb != lock) + ret = m5mols_write(&info->sd, AWB_LOCK, + lock ? REG_AWB_LOCK : REG_AWB_UNLOCK); + if (!ret) + info->lock_awb = lock; + + return ret; +} + +/* m5mols_lock_3a() - Lock 3A(Auto Exposure, Auto Whitebalance, Auto Focus) */ +int m5mols_lock_3a(struct m5mols_info *info, bool lock) +{ + int ret; + + ret = m5mols_lock_ae(info, lock); + if (!ret) + ret = m5mols_lock_awb(info, lock); + /* Don't need to handle unlocking AF */ + if (!ret && is_available_af(info) && lock) + ret = m5mols_write(&info->sd, AF_EXECUTE, REG_AF_STOP); + + return ret; +} + +/* m5mols_set_ctrl() - The main s_ctrl function called by m5mols_set_ctrl() */ +int m5mols_set_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct m5mols_info *info = to_m5mols(sd); + int ret; + + switch (ctrl->id) { + case V4L2_CID_ZOOM_ABSOLUTE: + return m5mols_write(sd, MON_ZOOM, ctrl->val); + + case V4L2_CID_EXPOSURE_AUTO: + ret = m5mols_lock_ae(info, + ctrl->val == V4L2_EXPOSURE_AUTO ? false : true); + if (!ret && ctrl->val == V4L2_EXPOSURE_AUTO) + ret = m5mols_write(sd, AE_MODE, REG_AE_ALL); + if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL) { + int val = info->exposure->val; + ret = m5mols_write(sd, AE_MODE, REG_AE_OFF); + if (!ret) + ret = m5mols_write(sd, AE_MAN_GAIN_MON, val); + if (!ret) + ret = m5mols_write(sd, AE_MAN_GAIN_CAP, val); + } + return ret; + + case V4L2_CID_AUTO_WHITE_BALANCE: + ret = m5mols_lock_awb(info, ctrl->val ? false : true); + if (!ret) + ret = m5mols_write(sd, AWB_MODE, ctrl->val ? + REG_AWB_AUTO : REG_AWB_PRESET); + return ret; + + case V4L2_CID_SATURATION: + ret = m5mols_write(sd, MON_CHROMA_LVL, ctrl->val); + if (!ret) + ret = m5mols_write(sd, MON_CHROMA_EN, REG_CHROMA_ON); + return ret; + + case V4L2_CID_COLORFX: + /* + * This control uses two kinds of registers: normal & color. + * The normal effect belongs to category 1, while the color + * one belongs to category 2. + * + * The normal effect uses one register: CAT1_EFFECT. + * The color effect uses three registers: + * CAT2_COLOR_EFFECT, CAT2_CFIXR, CAT2_CFIXB. + */ + ret = m5mols_write(sd, PARM_EFFECT, + ctrl->val == V4L2_COLORFX_NEGATIVE ? REG_EFFECT_NEGA : + ctrl->val == V4L2_COLORFX_EMBOSS ? REG_EFFECT_EMBOSS : + REG_EFFECT_OFF); + if (!ret) + ret = m5mols_write(sd, MON_EFFECT, + ctrl->val == V4L2_COLORFX_SEPIA ? + REG_COLOR_EFFECT_ON : REG_COLOR_EFFECT_OFF); + if (!ret) + ret = m5mols_write(sd, MON_CFIXR, + ctrl->val == V4L2_COLORFX_SEPIA ? + REG_CFIXR_SEPIA : 0); + if (!ret) + ret = m5mols_write(sd, MON_CFIXB, + ctrl->val == V4L2_COLORFX_SEPIA ? + REG_CFIXB_SEPIA : 0); + return ret; + } + + return -EINVAL; +} diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c new file mode 100644 index 000000000000..76eac26e84ae --- /dev/null +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -0,0 +1,1004 @@ +/* + * Driver for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim, riverful.kim@samsung.com + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "m5mols.h" +#include "m5mols_reg.h" + +int m5mols_debug; +module_param(m5mols_debug, int, 0644); + +#define MODULE_NAME "M5MOLS" +#define M5MOLS_I2C_CHECK_RETRY 500 + +/* The regulator consumer names for external voltage regulators */ +static struct regulator_bulk_data supplies[] = { + { + .supply = "core", /* ARM core power, 1.2V */ + }, { + .supply = "dig_18", /* digital power 1, 1.8V */ + }, { + .supply = "d_sensor", /* sensor power 1, 1.8V */ + }, { + .supply = "dig_28", /* digital power 2, 2.8V */ + }, { + .supply = "a_sensor", /* analog power */ + }, { + .supply = "dig_12", /* digital power 3, 1.2V */ + }, +}; + +static struct v4l2_mbus_framefmt m5mols_default_ffmt[M5MOLS_RESTYPE_MAX] = { + [M5MOLS_RESTYPE_MONITOR] = { + .width = 1920, + .height = 1080, + .code = V4L2_MBUS_FMT_VYUY8_2X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, + }, + [M5MOLS_RESTYPE_CAPTURE] = { + .width = 1920, + .height = 1080, + .code = V4L2_MBUS_FMT_JPEG_1X8, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_JPEG, + }, +}; +#define SIZE_DEFAULT_FFMT ARRAY_SIZE(m5mols_default_ffmt) + +static const struct m5mols_resolution m5mols_reg_res[] = { + { 0x01, M5MOLS_RESTYPE_MONITOR, 128, 96 }, /* SUB-QCIF */ + { 0x03, M5MOLS_RESTYPE_MONITOR, 160, 120 }, /* QQVGA */ + { 0x05, M5MOLS_RESTYPE_MONITOR, 176, 144 }, /* QCIF */ + { 0x06, M5MOLS_RESTYPE_MONITOR, 176, 176 }, + { 0x08, M5MOLS_RESTYPE_MONITOR, 240, 320 }, /* QVGA */ + { 0x09, M5MOLS_RESTYPE_MONITOR, 320, 240 }, /* QVGA */ + { 0x0c, M5MOLS_RESTYPE_MONITOR, 240, 400 }, /* WQVGA */ + { 0x0d, M5MOLS_RESTYPE_MONITOR, 400, 240 }, /* WQVGA */ + { 0x0e, M5MOLS_RESTYPE_MONITOR, 352, 288 }, /* CIF */ + { 0x13, M5MOLS_RESTYPE_MONITOR, 480, 360 }, + { 0x15, M5MOLS_RESTYPE_MONITOR, 640, 360 }, /* qHD */ + { 0x17, M5MOLS_RESTYPE_MONITOR, 640, 480 }, /* VGA */ + { 0x18, M5MOLS_RESTYPE_MONITOR, 720, 480 }, + { 0x1a, M5MOLS_RESTYPE_MONITOR, 800, 480 }, /* WVGA */ + { 0x1f, M5MOLS_RESTYPE_MONITOR, 800, 600 }, /* SVGA */ + { 0x21, M5MOLS_RESTYPE_MONITOR, 1280, 720 }, /* HD */ + { 0x25, M5MOLS_RESTYPE_MONITOR, 1920, 1080 }, /* 1080p */ + { 0x29, M5MOLS_RESTYPE_MONITOR, 3264, 2448 }, /* 2.63fps 8M */ + { 0x39, M5MOLS_RESTYPE_MONITOR, 800, 602 }, /* AHS_MON debug */ + + { 0x02, M5MOLS_RESTYPE_CAPTURE, 320, 240 }, /* QVGA */ + { 0x04, M5MOLS_RESTYPE_CAPTURE, 400, 240 }, /* WQVGA */ + { 0x07, M5MOLS_RESTYPE_CAPTURE, 480, 360 }, + { 0x08, M5MOLS_RESTYPE_CAPTURE, 640, 360 }, /* qHD */ + { 0x09, M5MOLS_RESTYPE_CAPTURE, 640, 480 }, /* VGA */ + { 0x0a, M5MOLS_RESTYPE_CAPTURE, 800, 480 }, /* WVGA */ + { 0x10, M5MOLS_RESTYPE_CAPTURE, 1280, 720 }, /* HD */ + { 0x14, M5MOLS_RESTYPE_CAPTURE, 1280, 960 }, /* 1M */ + { 0x17, M5MOLS_RESTYPE_CAPTURE, 1600, 1200 }, /* 2M */ + { 0x19, M5MOLS_RESTYPE_CAPTURE, 1920, 1080 }, /* Full-HD */ + { 0x1a, M5MOLS_RESTYPE_CAPTURE, 2048, 1152 }, /* 3Mega */ + { 0x1b, M5MOLS_RESTYPE_CAPTURE, 2048, 1536 }, + { 0x1c, M5MOLS_RESTYPE_CAPTURE, 2560, 1440 }, /* 4Mega */ + { 0x1d, M5MOLS_RESTYPE_CAPTURE, 2560, 1536 }, + { 0x1f, M5MOLS_RESTYPE_CAPTURE, 2560, 1920 }, /* 5Mega */ + { 0x21, M5MOLS_RESTYPE_CAPTURE, 3264, 1836 }, /* 6Mega */ + { 0x22, M5MOLS_RESTYPE_CAPTURE, 3264, 1960 }, + { 0x25, M5MOLS_RESTYPE_CAPTURE, 3264, 2448 }, /* 8Mega */ +}; + +/** + * m5mols_swap_byte - an byte array to integer conversion function + * @size: size in bytes of I2C packet defined in the M-5MOLS datasheet + * + * Convert I2C data byte array with performing any required byte + * reordering to assure proper values for each data type, regardless + * of the architecture endianness. + */ +static u32 m5mols_swap_byte(u8 *data, u8 length) +{ + if (length == 1) + return *data; + else if (length == 2) + return be16_to_cpu(*((u16 *)data)); + else + return be32_to_cpu(*((u32 *)data)); +} + +/** + * m5mols_read - I2C read function + * @reg: combination of size, category and command for the I2C packet + * @val: read value + */ +int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1]; + u8 size = I2C_SIZE(reg); + u8 category = I2C_CATEGORY(reg); + u8 cmd = I2C_COMMAND(reg); + struct i2c_msg msg[2]; + u8 wbuf[5]; + int ret; + + if (!client->adapter) + return -ENODEV; + + if (size != 1 && size != 2 && size != 4) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + msg[0].addr = client->addr; + msg[0].flags = 0; + msg[0].len = 5; + msg[0].buf = wbuf; + wbuf[0] = 5; + wbuf[1] = M5MOLS_BYTE_READ; + wbuf[2] = category; + wbuf[3] = cmd; + wbuf[4] = size; + + msg[1].addr = client->addr; + msg[1].flags = I2C_M_RD; + msg[1].len = size + 1; + msg[1].buf = rbuf; + + /* minimum stabilization time */ + usleep_range(200, 200); + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) { + v4l2_err(sd, "read failed: size:%d cat:%02x cmd:%02x. %d\n", + size, category, cmd, ret); + return ret; + } + + *val = m5mols_swap_byte(&rbuf[1], size); + + return 0; +} + +/** + * m5mols_write - I2C command write function + * @reg: combination of size, category and command for the I2C packet + * @val: value to write + */ +int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val) +{ + struct i2c_client *client = v4l2_get_subdevdata(sd); + u8 wbuf[M5MOLS_I2C_MAX_SIZE + 4]; + u8 category = I2C_CATEGORY(reg); + u8 cmd = I2C_COMMAND(reg); + u8 size = I2C_SIZE(reg); + u32 *buf = (u32 *)&wbuf[4]; + struct i2c_msg msg[1]; + int ret; + + if (!client->adapter) + return -ENODEV; + + if (size != 1 && size != 2 && size != 4) { + v4l2_err(sd, "Wrong data size\n"); + return -EINVAL; + } + + msg->addr = client->addr; + msg->flags = 0; + msg->len = (u16)size + 4; + msg->buf = wbuf; + wbuf[0] = size + 4; + wbuf[1] = M5MOLS_BYTE_WRITE; + wbuf[2] = category; + wbuf[3] = cmd; + + *buf = m5mols_swap_byte((u8 *)&val, size); + + usleep_range(200, 200); + + ret = i2c_transfer(client->adapter, msg, 1); + if (ret < 0) { + v4l2_err(sd, "write failed: size:%d cat:%02x cmd:%02x. %d\n", + size, category, cmd, ret); + return ret; + } + + return 0; +} + +int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask) +{ + u32 busy, i; + int ret; + + for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) { + ret = m5mols_read(sd, I2C_REG(category, cmd, 1), &busy); + if (ret < 0) + return ret; + if ((busy & mask) == mask) + return 0; + } + return -EBUSY; +} + +/** + * m5mols_enable_interrupt - Clear interrupt pending bits and unmask interrupts + * + * Before writing desired interrupt value the INT_FACTOR register should + * be read to clear pending interrupts. + */ +int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg) +{ + struct m5mols_info *info = to_m5mols(sd); + u32 mask = is_available_af(info) ? REG_INT_AF : 0; + u32 dummy; + int ret; + + ret = m5mols_read(sd, SYSTEM_INT_FACTOR, &dummy); + if (!ret) + ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask); + return ret; +} + +/** + * m5mols_reg_mode - Write the mode and check busy status + * + * It always accompanies a little delay changing the M-5MOLS mode, so it is + * needed checking current busy status to guarantee right mode. + */ +static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode) +{ + int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode); + + return ret ? ret : m5mols_busy(sd, CAT_SYSTEM, CAT0_SYSMODE, mode); +} + +/** + * m5mols_mode - manage the M-5MOLS's mode + * @mode: the required operation mode + * + * The commands of M-5MOLS are grouped into specific modes. Each functionality + * can be guaranteed only when the sensor is operating in mode which which + * a command belongs to. + */ +int m5mols_mode(struct m5mols_info *info, u32 mode) +{ + struct v4l2_subdev *sd = &info->sd; + int ret = -EINVAL; + u32 reg; + + if (mode < REG_PARAMETER && mode > REG_CAPTURE) + return ret; + + ret = m5mols_read(sd, SYSTEM_SYSMODE, ®); + if ((!ret && reg == mode) || ret) + return ret; + + switch (reg) { + case REG_PARAMETER: + ret = m5mols_reg_mode(sd, REG_MONITOR); + if (!ret && mode == REG_MONITOR) + break; + if (!ret) + ret = m5mols_reg_mode(sd, REG_CAPTURE); + break; + + case REG_MONITOR: + if (mode == REG_PARAMETER) { + ret = m5mols_reg_mode(sd, REG_PARAMETER); + break; + } + + ret = m5mols_reg_mode(sd, REG_CAPTURE); + break; + + case REG_CAPTURE: + ret = m5mols_reg_mode(sd, REG_MONITOR); + if (!ret && mode == REG_MONITOR) + break; + if (!ret) + ret = m5mols_reg_mode(sd, REG_PARAMETER); + break; + + default: + v4l2_warn(sd, "Wrong mode: %d\n", mode); + } + + if (!ret) + info->mode = mode; + + return ret; +} + +/** + * m5mols_get_version - retrieve full revisions information of M-5MOLS + * + * The version information includes revisions of hardware and firmware, + * AutoFocus alghorithm version and the version string. + */ +static int m5mols_get_version(struct v4l2_subdev *sd) +{ + struct m5mols_info *info = to_m5mols(sd); + union { + struct m5mols_version ver; + u8 bytes[VERSION_SIZE]; + } version; + u32 *value; + u8 cmd = CAT0_VER_CUSTOMER; + int ret; + + do { + value = (u32 *)&version.bytes[cmd]; + ret = m5mols_read(sd, SYSTEM_CMD(cmd), value); + if (ret) + return ret; + } while (cmd++ != CAT0_VER_AWB); + + do { + value = (u32 *)&version.bytes[cmd]; + ret = m5mols_read(sd, SYSTEM_VER_STRING, value); + if (ret) + return ret; + if (cmd >= VERSION_SIZE - 1) + return -EINVAL; + } while (version.bytes[cmd++]); + + value = (u32 *)&version.bytes[cmd]; + ret = m5mols_read(sd, AF_VERSION, value); + if (ret) + return ret; + + /* store version information swapped for being readable */ + info->ver = version.ver; + info->ver.fw = be16_to_cpu(info->ver.fw); + info->ver.hw = be16_to_cpu(info->ver.hw); + info->ver.param = be16_to_cpu(info->ver.param); + info->ver.awb = be16_to_cpu(info->ver.awb); + + v4l2_info(sd, "Manufacturer\t[%s]\n", + is_manufacturer(info, REG_SAMSUNG_ELECTRO) ? + "Samsung Electro-Machanics" : + is_manufacturer(info, REG_SAMSUNG_OPTICS) ? + "Samsung Fiber-Optics" : + is_manufacturer(info, REG_SAMSUNG_TECHWIN) ? + "Samsung Techwin" : "None"); + v4l2_info(sd, "Customer/Project\t[0x%02x/0x%02x]\n", + info->ver.customer, info->ver.project); + + if (!is_available_af(info)) + v4l2_info(sd, "No support Auto Focus on this firmware\n"); + + return ret; +} + +/** + * __find_restype - Lookup M-5MOLS resolution type according to pixel code + * @code: pixel code + */ +static enum m5mols_restype __find_restype(enum v4l2_mbus_pixelcode code) +{ + enum m5mols_restype type = M5MOLS_RESTYPE_MONITOR; + + do { + if (code == m5mols_default_ffmt[type].code) + return type; + } while (type++ != SIZE_DEFAULT_FFMT); + + return 0; +} + +/** + * __find_resolution - Lookup preset and type of M-5MOLS's resolution + * @mf: pixel format to find/negotiate the resolution preset for + * @type: M-5MOLS resolution type + * @resolution: M-5MOLS resolution preset register value + * + * Find nearest resolution matching resolution preset and adjust mf + * to supported values. + */ +static int __find_resolution(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *mf, + enum m5mols_restype *type, + u32 *resolution) +{ + const struct m5mols_resolution *fsize = &m5mols_reg_res[0]; + const struct m5mols_resolution *match = NULL; + enum m5mols_restype stype = __find_restype(mf->code); + int i = ARRAY_SIZE(m5mols_reg_res); + unsigned int min_err = ~0; + + while (i--) { + int err; + if (stype == fsize->type) { + err = abs(fsize->width - mf->width) + + abs(fsize->height - mf->height); + + if (err < min_err) { + min_err = err; + match = fsize; + } + } + fsize++; + } + if (match) { + mf->width = match->width; + mf->height = match->height; + *resolution = match->reg; + *type = stype; + return 0; + } + + return -EINVAL; +} + +static struct v4l2_mbus_framefmt *__find_format(struct m5mols_info *info, + struct v4l2_subdev_fh *fh, + enum v4l2_subdev_format_whence which, + enum m5mols_restype type) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return fh ? v4l2_subdev_get_try_format(fh, 0) : NULL; + + return &info->ffmt[type]; +} + +static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct m5mols_info *info = to_m5mols(sd); + struct v4l2_mbus_framefmt *format; + + if (fmt->pad != 0) + return -EINVAL; + + format = __find_format(info, fh, fmt->which, info->res_type); + if (!format) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct m5mols_info *info = to_m5mols(sd); + struct v4l2_mbus_framefmt *format = &fmt->format; + struct v4l2_mbus_framefmt *sfmt; + enum m5mols_restype type; + u32 resolution = 0; + int ret; + + if (fmt->pad != 0) + return -EINVAL; + + ret = __find_resolution(sd, format, &type, &resolution); + if (ret < 0) + return ret; + + sfmt = __find_format(info, fh, fmt->which, type); + if (!sfmt) + return 0; + + *sfmt = m5mols_default_ffmt[type]; + sfmt->width = format->width; + sfmt->height = format->height; + + if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + info->resolution = resolution; + info->code = format->code; + info->res_type = type; + } + + return 0; +} + +static int m5mols_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (!code || code->index >= SIZE_DEFAULT_FFMT) + return -EINVAL; + + code->code = m5mols_default_ffmt[code->index].code; + + return 0; +} + +static struct v4l2_subdev_pad_ops m5mols_pad_ops = { + .enum_mbus_code = m5mols_enum_mbus_code, + .get_fmt = m5mols_get_fmt, + .set_fmt = m5mols_set_fmt, +}; + +/** + * m5mols_sync_controls - Apply default scene mode and the current controls + * + * This is used only streaming for syncing between v4l2_ctrl framework and + * m5mols's controls. First, do the scenemode to the sensor, then call + * v4l2_ctrl_handler_setup. It can be same between some commands and + * the scenemode's in the default v4l2_ctrls. But, such commands of control + * should be prior to the scenemode's one. + */ +int m5mols_sync_controls(struct m5mols_info *info) +{ + int ret = -EINVAL; + + if (!is_ctrl_synced(info)) { + ret = m5mols_do_scenemode(info, REG_SCENE_NORMAL); + if (ret) + return ret; + + v4l2_ctrl_handler_setup(&info->handle); + info->ctrl_sync = true; + } + + return ret; +} + +/** + * m5mols_start_monitor - Start the monitor mode + * + * Before applying the controls setup the resolution and frame rate + * in PARAMETER mode, and then switch over to MONITOR mode. + */ +static int m5mols_start_monitor(struct m5mols_info *info) +{ + struct v4l2_subdev *sd = &info->sd; + int ret; + + ret = m5mols_mode(info, REG_PARAMETER); + if (!ret) + ret = m5mols_write(sd, PARM_MON_SIZE, info->resolution); + if (!ret) + ret = m5mols_write(sd, PARM_MON_FPS, REG_FPS_30); + if (!ret) + ret = m5mols_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_sync_controls(info); + + return ret; +} + +static int m5mols_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct m5mols_info *info = to_m5mols(sd); + + if (enable) { + int ret = -EINVAL; + + if (is_code(info->code, M5MOLS_RESTYPE_MONITOR)) + ret = m5mols_start_monitor(info); + if (is_code(info->code, M5MOLS_RESTYPE_CAPTURE)) + ret = m5mols_start_capture(info); + + return ret; + } + + return m5mols_mode(info, REG_PARAMETER); +} + +static const struct v4l2_subdev_video_ops m5mols_video_ops = { + .s_stream = m5mols_s_stream, +}; + +static int m5mols_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = to_sd(ctrl); + struct m5mols_info *info = to_m5mols(sd); + int ret; + + info->mode_save = info->mode; + + ret = m5mols_mode(info, REG_PARAMETER); + if (!ret) + ret = m5mols_set_ctrl(ctrl); + if (!ret) + ret = m5mols_mode(info, info->mode_save); + + return ret; +} + +static const struct v4l2_ctrl_ops m5mols_ctrl_ops = { + .s_ctrl = m5mols_s_ctrl, +}; + +static int m5mols_sensor_power(struct m5mols_info *info, bool enable) +{ + struct v4l2_subdev *sd = &info->sd; + struct i2c_client *client = v4l2_get_subdevdata(sd); + const struct m5mols_platform_data *pdata = info->pdata; + int ret; + + if (enable) { + if (is_powered(info)) + return 0; + + if (info->set_power) { + ret = info->set_power(&client->dev, 1); + if (ret) + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies); + if (ret) { + info->set_power(&client->dev, 0); + return ret; + } + + gpio_set_value(pdata->gpio_reset, !pdata->reset_polarity); + usleep_range(1000, 1000); + info->power = true; + + return ret; + } + + if (!is_powered(info)) + return 0; + + ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies); + if (ret) + return ret; + + if (info->set_power) + info->set_power(&client->dev, 0); + + gpio_set_value(pdata->gpio_reset, pdata->reset_polarity); + usleep_range(1000, 1000); + info->power = false; + + return ret; +} + +/* m5mols_update_fw - optional firmware update routine */ +int __attribute__ ((weak)) m5mols_update_fw(struct v4l2_subdev *sd, + int (*set_power)(struct m5mols_info *, bool)) +{ + return 0; +} + +/** + * m5mols_sensor_armboot - Booting M-5MOLS internal ARM core. + * + * Booting internal ARM core makes the M-5MOLS is ready for getting commands + * with I2C. It's the first thing to be done after it powered up. It must wait + * at least 520ms recommended by M-5MOLS datasheet, after executing arm booting. + */ +static int m5mols_sensor_armboot(struct v4l2_subdev *sd) +{ + int ret; + + ret = m5mols_write(sd, FLASH_CAM_START, REG_START_ARM_BOOT); + if (ret < 0) + return ret; + + msleep(520); + + ret = m5mols_get_version(sd); + if (!ret) + ret = m5mols_update_fw(sd, m5mols_sensor_power); + if (ret) + return ret; + + v4l2_dbg(1, m5mols_debug, sd, "Success ARM Booting\n"); + + ret = m5mols_write(sd, PARM_INTERFACE, REG_INTERFACE_MIPI); + if (!ret) + ret = m5mols_enable_interrupt(sd, REG_INT_AF); + + return ret; +} + +static int m5mols_init_controls(struct m5mols_info *info) +{ + struct v4l2_subdev *sd = &info->sd; + u16 max_exposure; + u16 step_zoom; + int ret; + + /* Determine value's range & step of controls for various FW version */ + ret = m5mols_read(sd, AE_MAX_GAIN_MON, (u32 *)&max_exposure); + if (!ret) + step_zoom = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1; + if (ret) + return ret; + + v4l2_ctrl_handler_init(&info->handle, 6); + info->autowb = v4l2_ctrl_new_std(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_AUTO_WHITE_BALANCE, + 0, 1, 1, 0); + info->saturation = v4l2_ctrl_new_std(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_SATURATION, + 1, 5, 1, 3); + info->zoom = v4l2_ctrl_new_std(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_ZOOM_ABSOLUTE, + 1, 70, step_zoom, 1); + info->exposure = v4l2_ctrl_new_std(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_EXPOSURE, + 0, max_exposure, 1, (int)max_exposure/2); + info->colorfx = v4l2_ctrl_new_std_menu(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_COLORFX, + 4, (1 << V4L2_COLORFX_BW), V4L2_COLORFX_NONE); + info->autoexposure = v4l2_ctrl_new_std_menu(&info->handle, + &m5mols_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, + 1, 0, V4L2_EXPOSURE_MANUAL); + + sd->ctrl_handler = &info->handle; + if (info->handle.error) { + v4l2_err(sd, "Failed to initialize controls: %d\n", ret); + v4l2_ctrl_handler_free(&info->handle); + return info->handle.error; + } + + v4l2_ctrl_cluster(2, &info->autoexposure); + + return 0; +} + +/** + * m5mols_s_power - Main sensor power control function + * + * To prevent breaking the lens when the sensor is powered off the Soft-Landing + * algorithm is called where available. The Soft-Landing algorithm availability + * dependends on the firmware provider. + */ +static int m5mols_s_power(struct v4l2_subdev *sd, int on) +{ + struct m5mols_info *info = to_m5mols(sd); + int ret; + + if (on) { + ret = m5mols_sensor_power(info, true); + if (!ret) + ret = m5mols_sensor_armboot(sd); + if (!ret) + ret = m5mols_init_controls(info); + if (ret) + return ret; + + info->ffmt[M5MOLS_RESTYPE_MONITOR] = + m5mols_default_ffmt[M5MOLS_RESTYPE_MONITOR]; + info->ffmt[M5MOLS_RESTYPE_CAPTURE] = + m5mols_default_ffmt[M5MOLS_RESTYPE_CAPTURE]; + return ret; + } + + if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) { + ret = m5mols_mode(info, REG_MONITOR); + if (!ret) + ret = m5mols_write(sd, AF_EXECUTE, REG_AF_STOP); + if (!ret) + ret = m5mols_write(sd, AF_MODE, REG_AF_POWEROFF); + if (!ret) + ret = m5mols_busy(sd, CAT_SYSTEM, CAT0_STATUS, + REG_AF_IDLE); + if (!ret) + v4l2_info(sd, "Success soft-landing lens\n"); + } + + ret = m5mols_sensor_power(info, false); + if (!ret) { + v4l2_ctrl_handler_free(&info->handle); + info->ctrl_sync = false; + } + + return ret; +} + +static int m5mols_log_status(struct v4l2_subdev *sd) +{ + struct m5mols_info *info = to_m5mols(sd); + + v4l2_ctrl_handler_log_status(&info->handle, sd->name); + + return 0; +} + +static const struct v4l2_subdev_core_ops m5mols_core_ops = { + .s_power = m5mols_s_power, + .g_ctrl = v4l2_subdev_g_ctrl, + .s_ctrl = v4l2_subdev_s_ctrl, + .queryctrl = v4l2_subdev_queryctrl, + .querymenu = v4l2_subdev_querymenu, + .g_ext_ctrls = v4l2_subdev_g_ext_ctrls, + .try_ext_ctrls = v4l2_subdev_try_ext_ctrls, + .s_ext_ctrls = v4l2_subdev_s_ext_ctrls, + .log_status = m5mols_log_status, +}; + +static const struct v4l2_subdev_ops m5mols_ops = { + .core = &m5mols_core_ops, + .pad = &m5mols_pad_ops, + .video = &m5mols_video_ops, +}; + +static void m5mols_irq_work(struct work_struct *work) +{ + struct m5mols_info *info = + container_of(work, struct m5mols_info, work_irq); + struct v4l2_subdev *sd = &info->sd; + u32 reg; + int ret; + + if (!is_powered(info) || + m5mols_read(sd, SYSTEM_INT_FACTOR, &info->interrupt)) + return; + + switch (info->interrupt & REG_INT_MASK) { + case REG_INT_AF: + if (!is_available_af(info)) + break; + ret = m5mols_read(sd, AF_STATUS, ®); + v4l2_dbg(2, m5mols_debug, sd, "AF %s\n", + reg == REG_AF_FAIL ? "Failed" : + reg == REG_AF_SUCCESS ? "Success" : + reg == REG_AF_IDLE ? "Idle" : "Busy"); + break; + case REG_INT_CAPTURE: + if (!test_and_set_bit(ST_CAPT_IRQ, &info->flags)) + wake_up_interruptible(&info->irq_waitq); + + v4l2_dbg(2, m5mols_debug, sd, "CAPTURE\n"); + break; + default: + v4l2_dbg(2, m5mols_debug, sd, "Undefined: %02x\n", reg); + break; + }; +} + +static irqreturn_t m5mols_irq_handler(int irq, void *data) +{ + struct v4l2_subdev *sd = data; + struct m5mols_info *info = to_m5mols(sd); + + schedule_work(&info->work_irq); + + return IRQ_HANDLED; +} + +static int __devinit m5mols_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct m5mols_platform_data *pdata = client->dev.platform_data; + struct m5mols_info *info; + struct v4l2_subdev *sd; + int ret; + + if (pdata == NULL) { + dev_err(&client->dev, "No platform data\n"); + return -EINVAL; + } + + if (!gpio_is_valid(pdata->gpio_reset)) { + dev_err(&client->dev, "No valid RESET GPIO specified\n"); + return -EINVAL; + } + + if (!pdata->irq) { + dev_err(&client->dev, "Interrupt not assigned\n"); + return -EINVAL; + } + + info = kzalloc(sizeof(struct m5mols_info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->pdata = pdata; + info->set_power = pdata->set_power; + + ret = gpio_request(pdata->gpio_reset, "M5MOLS_NRST"); + if (ret) { + dev_err(&client->dev, "Failed to request gpio: %d\n", ret); + goto out_free; + } + gpio_direction_output(pdata->gpio_reset, pdata->reset_polarity); + + ret = regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies), supplies); + if (ret) { + dev_err(&client->dev, "Failed to get regulators: %d\n", ret); + goto out_gpio; + } + + sd = &info->sd; + strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); + v4l2_i2c_subdev_init(sd, client, &m5mols_ops); + + info->pad.flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_init(&sd->entity, 1, &info->pad, 0); + if (ret < 0) + goto out_reg; + sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR; + + init_waitqueue_head(&info->irq_waitq); + INIT_WORK(&info->work_irq, m5mols_irq_work); + ret = request_irq(pdata->irq, m5mols_irq_handler, + IRQF_TRIGGER_RISING, MODULE_NAME, sd); + if (ret) { + dev_err(&client->dev, "Interrupt request failed: %d\n", ret); + goto out_me; + } + info->res_type = M5MOLS_RESTYPE_MONITOR; + return 0; +out_me: + media_entity_cleanup(&sd->entity); +out_reg: + regulator_bulk_free(ARRAY_SIZE(supplies), supplies); +out_gpio: + gpio_free(pdata->gpio_reset); +out_free: + kfree(info); + return ret; +} + +static int __devexit m5mols_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct m5mols_info *info = to_m5mols(sd); + + v4l2_device_unregister_subdev(sd); + free_irq(info->pdata->irq, sd); + + regulator_bulk_free(ARRAY_SIZE(supplies), supplies); + gpio_free(info->pdata->gpio_reset); + media_entity_cleanup(&sd->entity); + kfree(info); + return 0; +} + +static const struct i2c_device_id m5mols_id[] = { + { MODULE_NAME, 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, m5mols_id); + +static struct i2c_driver m5mols_i2c_driver = { + .driver = { + .name = MODULE_NAME, + }, + .probe = m5mols_probe, + .remove = __devexit_p(m5mols_remove), + .id_table = m5mols_id, +}; + +static int __init m5mols_mod_init(void) +{ + return i2c_add_driver(&m5mols_i2c_driver); +} + +static void __exit m5mols_mod_exit(void) +{ + i2c_del_driver(&m5mols_i2c_driver); +} + +module_init(m5mols_mod_init); +module_exit(m5mols_mod_exit); + +MODULE_AUTHOR("HeungJun Kim "); +MODULE_AUTHOR("Dongsoo Kim "); +MODULE_DESCRIPTION("Fujitsu M-5MOLS 8M Pixel camera driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/m5mols/m5mols_reg.h b/drivers/media/video/m5mols/m5mols_reg.h new file mode 100644 index 000000000000..b83e36fc6ac6 --- /dev/null +++ b/drivers/media/video/m5mols/m5mols_reg.h @@ -0,0 +1,399 @@ +/* + * Register map for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim, riverful.kim@samsung.com + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef M5MOLS_REG_H +#define M5MOLS_REG_H + +#define M5MOLS_I2C_MAX_SIZE 4 +#define M5MOLS_BYTE_READ 0x01 +#define M5MOLS_BYTE_WRITE 0x02 + +#define I2C_CATEGORY(__cat) ((__cat >> 16) & 0xff) +#define I2C_COMMAND(__comm) ((__comm >> 8) & 0xff) +#define I2C_SIZE(__reg_s) ((__reg_s) & 0xff) +#define I2C_REG(__cat, __cmd, __reg_s) ((__cat << 16) | (__cmd << 8) | __reg_s) + +/* + * Category section register + * + * The category means set including relevant command of M-5MOLS. + */ +#define CAT_SYSTEM 0x00 +#define CAT_PARAM 0x01 +#define CAT_MONITOR 0x02 +#define CAT_AE 0x03 +#define CAT_WB 0x06 +#define CAT_EXIF 0x07 +#define CAT_FD 0x09 +#define CAT_LENS 0x0a +#define CAT_CAPT_PARM 0x0b +#define CAT_CAPT_CTRL 0x0c +#define CAT_FLASH 0x0f /* related to FW, revisions, booting */ + +/* + * Category 0 - SYSTEM mode + * + * The SYSTEM mode in the M-5MOLS means area available to handle with the whole + * & all-round system of sensor. It deals with version/interrupt/setting mode & + * even sensor's status. Especially, the M-5MOLS sensor with ISP varies by + * packaging & manufacturer, even the customer and project code. And the + * function details may vary among them. The version information helps to + * determine what methods shall be used in the driver. + * + * There is many registers between customer version address and awb one. For + * more specific contents, see definition if file m5mols.h. + */ +#define CAT0_VER_CUSTOMER 0x00 /* customer version */ +#define CAT0_VER_AWB 0x09 /* Auto WB version */ +#define CAT0_VER_STRING 0x0a /* string including M-5MOLS */ +#define CAT0_SYSMODE 0x0b /* SYSTEM mode register */ +#define CAT0_STATUS 0x0c /* SYSTEM mode status register */ +#define CAT0_INT_FACTOR 0x10 /* interrupt pending register */ +#define CAT0_INT_ENABLE 0x11 /* interrupt enable register */ + +#define SYSTEM_SYSMODE I2C_REG(CAT_SYSTEM, CAT0_SYSMODE, 1) +#define REG_SYSINIT 0x00 /* SYSTEM mode */ +#define REG_PARAMETER 0x01 /* PARAMETER mode */ +#define REG_MONITOR 0x02 /* MONITOR mode */ +#define REG_CAPTURE 0x03 /* CAPTURE mode */ + +#define SYSTEM_CMD(__cmd) I2C_REG(CAT_SYSTEM, cmd, 1) +#define SYSTEM_VER_STRING I2C_REG(CAT_SYSTEM, CAT0_VER_STRING, 1) +#define REG_SAMSUNG_ELECTRO "SE" /* Samsung Electro-Mechanics */ +#define REG_SAMSUNG_OPTICS "OP" /* Samsung Fiber-Optics */ +#define REG_SAMSUNG_TECHWIN "TB" /* Samsung Techwin */ + +#define SYSTEM_INT_FACTOR I2C_REG(CAT_SYSTEM, CAT0_INT_FACTOR, 1) +#define SYSTEM_INT_ENABLE I2C_REG(CAT_SYSTEM, CAT0_INT_ENABLE, 1) +#define REG_INT_MODE (1 << 0) +#define REG_INT_AF (1 << 1) +#define REG_INT_ZOOM (1 << 2) +#define REG_INT_CAPTURE (1 << 3) +#define REG_INT_FRAMESYNC (1 << 4) +#define REG_INT_FD (1 << 5) +#define REG_INT_LENS_INIT (1 << 6) +#define REG_INT_SOUND (1 << 7) +#define REG_INT_MASK 0x0f + +/* + * category 1 - PARAMETER mode + * + * This category supports function of camera features of M-5MOLS. It means we + * can handle with preview(MONITOR) resolution size/frame per second/interface + * between the sensor and the Application Processor/even the image effect. + */ +#define CAT1_DATA_INTERFACE 0x00 /* interface between sensor and AP */ +#define CAT1_MONITOR_SIZE 0x01 /* resolution at the MONITOR mode */ +#define CAT1_MONITOR_FPS 0x02 /* frame per second at this mode */ +#define CAT1_EFFECT 0x0b /* image effects */ + +#define PARM_MON_SIZE I2C_REG(CAT_PARAM, CAT1_MONITOR_SIZE, 1) + +#define PARM_MON_FPS I2C_REG(CAT_PARAM, CAT1_MONITOR_FPS, 1) +#define REG_FPS_30 0x02 + +#define PARM_INTERFACE I2C_REG(CAT_PARAM, CAT1_DATA_INTERFACE, 1) +#define REG_INTERFACE_MIPI 0x02 + +#define PARM_EFFECT I2C_REG(CAT_PARAM, CAT1_EFFECT, 1) +#define REG_EFFECT_OFF 0x00 +#define REG_EFFECT_NEGA 0x01 +#define REG_EFFECT_EMBOSS 0x06 +#define REG_EFFECT_OUTLINE 0x07 +#define REG_EFFECT_WATERCOLOR 0x08 + +/* + * Category 2 - MONITOR mode + * + * The MONITOR mode is same as preview mode as we said. The M-5MOLS has another + * mode named "Preview", but this preview mode is used at the case specific + * vider-recording mode. This mmode supports only YUYV format. On the other + * hand, the JPEG & RAW formats is supports by CAPTURE mode. And, there are + * another options like zoom/color effect(different with effect in PARAMETER + * mode)/anti hand shaking algorithm. + */ +#define CAT2_ZOOM 0x01 /* set the zoom position & execute */ +#define CAT2_ZOOM_STEP 0x03 /* set the zoom step */ +#define CAT2_CFIXB 0x09 /* CB value for color effect */ +#define CAT2_CFIXR 0x0a /* CR value for color effect */ +#define CAT2_COLOR_EFFECT 0x0b /* set on/off of color effect */ +#define CAT2_CHROMA_LVL 0x0f /* set chroma level */ +#define CAT2_CHROMA_EN 0x10 /* set on/off of choroma */ +#define CAT2_EDGE_LVL 0x11 /* set sharpness level */ +#define CAT2_EDGE_EN 0x12 /* set on/off sharpness */ +#define CAT2_TONE_CTL 0x25 /* set tone color(contrast) */ + +#define MON_ZOOM I2C_REG(CAT_MONITOR, CAT2_ZOOM, 1) + +#define MON_CFIXR I2C_REG(CAT_MONITOR, CAT2_CFIXR, 1) +#define MON_CFIXB I2C_REG(CAT_MONITOR, CAT2_CFIXB, 1) +#define REG_CFIXB_SEPIA 0xd8 +#define REG_CFIXR_SEPIA 0x18 + +#define MON_EFFECT I2C_REG(CAT_MONITOR, CAT2_COLOR_EFFECT, 1) +#define REG_COLOR_EFFECT_OFF 0x00 +#define REG_COLOR_EFFECT_ON 0x01 + +#define MON_CHROMA_EN I2C_REG(CAT_MONITOR, CAT2_CHROMA_EN, 1) +#define MON_CHROMA_LVL I2C_REG(CAT_MONITOR, CAT2_CHROMA_LVL, 1) +#define REG_CHROMA_OFF 0x00 +#define REG_CHROMA_ON 0x01 + +#define MON_EDGE_EN I2C_REG(CAT_MONITOR, CAT2_EDGE_EN, 1) +#define MON_EDGE_LVL I2C_REG(CAT_MONITOR, CAT2_EDGE_LVL, 1) +#define REG_EDGE_OFF 0x00 +#define REG_EDGE_ON 0x01 + +#define MON_TONE_CTL I2C_REG(CAT_MONITOR, CAT2_TONE_CTL, 1) + +/* + * Category 3 - Auto Exposure + * + * The M-5MOLS exposure capbility is detailed as which is similar to digital + * camera. This category supports AE locking/various AE mode(range of exposure) + * /ISO/flickering/EV bias/shutter/meteoring, and anything else. And the + * maximum/minimum exposure gain value depending on M-5MOLS firmware, may be + * different. So, this category also provide getting the max/min values. And, + * each MONITOR and CAPTURE mode has each gain/shutter/max exposure values. + */ +#define CAT3_AE_LOCK 0x00 /* locking Auto exposure */ +#define CAT3_AE_MODE 0x01 /* set AE mode, mode means range */ +#define CAT3_ISO 0x05 /* set ISO */ +#define CAT3_EV_PRESET_MONITOR 0x0a /* EV(scenemode) preset for MONITOR */ +#define CAT3_EV_PRESET_CAPTURE 0x0b /* EV(scenemode) preset for CAPTURE */ +#define CAT3_MANUAL_GAIN_MON 0x12 /* meteoring value for the MONITOR */ +#define CAT3_MAX_GAIN_MON 0x1a /* max gain value for the MONITOR */ +#define CAT3_MANUAL_GAIN_CAP 0x26 /* meteoring value for the CAPTURE */ +#define CAT3_AE_INDEX 0x38 /* AE index */ + +#define AE_LOCK I2C_REG(CAT_AE, CAT3_AE_LOCK, 1) +#define REG_AE_UNLOCK 0x00 +#define REG_AE_LOCK 0x01 + +#define AE_MODE I2C_REG(CAT_AE, CAT3_AE_MODE, 1) +#define REG_AE_OFF 0x00 /* AE off */ +#define REG_AE_ALL 0x01 /* calc AE in all block integral */ +#define REG_AE_CENTER 0x03 /* calc AE in center weighted */ +#define REG_AE_SPOT 0x06 /* calc AE in specific spot */ + +#define AE_ISO I2C_REG(CAT_AE, CAT3_ISO, 1) +#define REG_ISO_AUTO 0x00 +#define REG_ISO_50 0x01 +#define REG_ISO_100 0x02 +#define REG_ISO_200 0x03 +#define REG_ISO_400 0x04 +#define REG_ISO_800 0x05 + +#define AE_EV_PRESET_MONITOR I2C_REG(CAT_AE, CAT3_EV_PRESET_MONITOR, 1) +#define AE_EV_PRESET_CAPTURE I2C_REG(CAT_AE, CAT3_EV_PRESET_CAPTURE, 1) +#define REG_SCENE_NORMAL 0x00 +#define REG_SCENE_PORTRAIT 0x01 +#define REG_SCENE_LANDSCAPE 0x02 +#define REG_SCENE_SPORTS 0x03 +#define REG_SCENE_PARTY_INDOOR 0x04 +#define REG_SCENE_BEACH_SNOW 0x05 +#define REG_SCENE_SUNSET 0x06 +#define REG_SCENE_DAWN_DUSK 0x07 +#define REG_SCENE_FALL 0x08 +#define REG_SCENE_NIGHT 0x09 +#define REG_SCENE_AGAINST_LIGHT 0x0a +#define REG_SCENE_FIRE 0x0b +#define REG_SCENE_TEXT 0x0c +#define REG_SCENE_CANDLE 0x0d + +#define AE_MAN_GAIN_MON I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_MON, 2) +#define AE_MAX_GAIN_MON I2C_REG(CAT_AE, CAT3_MAX_GAIN_MON, 2) +#define AE_MAN_GAIN_CAP I2C_REG(CAT_AE, CAT3_MANUAL_GAIN_CAP, 2) + +#define AE_INDEX I2C_REG(CAT_AE, CAT3_AE_INDEX, 1) +#define REG_AE_INDEX_20_NEG 0x00 +#define REG_AE_INDEX_15_NEG 0x01 +#define REG_AE_INDEX_10_NEG 0x02 +#define REG_AE_INDEX_05_NEG 0x03 +#define REG_AE_INDEX_00 0x04 +#define REG_AE_INDEX_05_POS 0x05 +#define REG_AE_INDEX_10_POS 0x06 +#define REG_AE_INDEX_15_POS 0x07 +#define REG_AE_INDEX_20_POS 0x08 + +/* + * Category 6 - White Balance + * + * This category provide AWB locking/mode/preset/speed/gain bias, etc. + */ +#define CAT6_AWB_LOCK 0x00 /* locking Auto Whitebalance */ +#define CAT6_AWB_MODE 0x02 /* set Auto or Manual */ +#define CAT6_AWB_MANUAL 0x03 /* set Manual(preset) value */ + +#define AWB_LOCK I2C_REG(CAT_WB, CAT6_AWB_LOCK, 1) +#define REG_AWB_UNLOCK 0x00 +#define REG_AWB_LOCK 0x01 + +#define AWB_MODE I2C_REG(CAT_WB, CAT6_AWB_MODE, 1) +#define REG_AWB_AUTO 0x01 /* AWB off */ +#define REG_AWB_PRESET 0x02 /* AWB preset */ + +#define AWB_MANUAL I2C_REG(CAT_WB, CAT6_AWB_MANUAL, 1) +#define REG_AWB_INCANDESCENT 0x01 +#define REG_AWB_FLUORESCENT_1 0x02 +#define REG_AWB_FLUORESCENT_2 0x03 +#define REG_AWB_DAYLIGHT 0x04 +#define REG_AWB_CLOUDY 0x05 +#define REG_AWB_SHADE 0x06 +#define REG_AWB_HORIZON 0x07 +#define REG_AWB_LEDLIGHT 0x09 + +/* + * Category 7 - EXIF information + */ +#define CAT7_INFO_EXPTIME_NU 0x00 +#define CAT7_INFO_EXPTIME_DE 0x04 +#define CAT7_INFO_TV_NU 0x08 +#define CAT7_INFO_TV_DE 0x0c +#define CAT7_INFO_AV_NU 0x10 +#define CAT7_INFO_AV_DE 0x14 +#define CAT7_INFO_BV_NU 0x18 +#define CAT7_INFO_BV_DE 0x1c +#define CAT7_INFO_EBV_NU 0x20 +#define CAT7_INFO_EBV_DE 0x24 +#define CAT7_INFO_ISO 0x28 +#define CAT7_INFO_FLASH 0x2a +#define CAT7_INFO_SDR 0x2c +#define CAT7_INFO_QVAL 0x2e + +#define EXIF_INFO_EXPTIME_NU I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_NU, 4) +#define EXIF_INFO_EXPTIME_DE I2C_REG(CAT_EXIF, CAT7_INFO_EXPTIME_DE, 4) +#define EXIF_INFO_TV_NU I2C_REG(CAT_EXIF, CAT7_INFO_TV_NU, 4) +#define EXIF_INFO_TV_DE I2C_REG(CAT_EXIF, CAT7_INFO_TV_DE, 4) +#define EXIF_INFO_AV_NU I2C_REG(CAT_EXIF, CAT7_INFO_AV_NU, 4) +#define EXIF_INFO_AV_DE I2C_REG(CAT_EXIF, CAT7_INFO_AV_DE, 4) +#define EXIF_INFO_BV_NU I2C_REG(CAT_EXIF, CAT7_INFO_BV_NU, 4) +#define EXIF_INFO_BV_DE I2C_REG(CAT_EXIF, CAT7_INFO_BV_DE, 4) +#define EXIF_INFO_EBV_NU I2C_REG(CAT_EXIF, CAT7_INFO_EBV_NU, 4) +#define EXIF_INFO_EBV_DE I2C_REG(CAT_EXIF, CAT7_INFO_EBV_DE, 4) +#define EXIF_INFO_ISO I2C_REG(CAT_EXIF, CAT7_INFO_ISO, 2) +#define EXIF_INFO_FLASH I2C_REG(CAT_EXIF, CAT7_INFO_FLASH, 2) +#define EXIF_INFO_SDR I2C_REG(CAT_EXIF, CAT7_INFO_SDR, 2) +#define EXIF_INFO_QVAL I2C_REG(CAT_EXIF, CAT7_INFO_QVAL, 2) + +/* + * Category 9 - Face Detection + */ +#define CAT9_FD_CTL 0x00 + +#define FD_CTL I2C_REG(CAT_FD, CAT9_FD_CTL, 1) +#define BIT_FD_EN 0 +#define BIT_FD_DRAW_FACE_FRAME 4 +#define BIT_FD_DRAW_SMILE_LVL 6 +#define REG_FD(shift) (1 << shift) +#define REG_FD_OFF 0x0 + +/* + * Category A - Lens Parameter + */ +#define CATA_AF_MODE 0x01 +#define CATA_AF_EXECUTE 0x02 +#define CATA_AF_STATUS 0x03 +#define CATA_AF_VERSION 0x0a + +#define AF_MODE I2C_REG(CAT_LENS, CATA_AF_MODE, 1) +#define REG_AF_NORMAL 0x00 /* Normal AF, one time */ +#define REG_AF_MACRO 0x01 /* Macro AF, one time */ +#define REG_AF_POWEROFF 0x07 + +#define AF_EXECUTE I2C_REG(CAT_LENS, CATA_AF_EXECUTE, 1) +#define REG_AF_STOP 0x00 +#define REG_AF_EXE_AUTO 0x01 +#define REG_AF_EXE_CAF 0x02 + +#define AF_STATUS I2C_REG(CAT_LENS, CATA_AF_STATUS, 1) +#define REG_AF_FAIL 0x00 +#define REG_AF_SUCCESS 0x02 +#define REG_AF_IDLE 0x04 +#define REG_AF_BUSY 0x05 + +#define AF_VERSION I2C_REG(CAT_LENS, CATA_AF_VERSION, 1) + +/* + * Category B - CAPTURE Parameter + */ +#define CATB_YUVOUT_MAIN 0x00 +#define CATB_MAIN_IMAGE_SIZE 0x01 +#define CATB_MCC_MODE 0x1d +#define CATB_WDR_EN 0x2c +#define CATB_LIGHT_CTRL 0x40 +#define CATB_FLASH_CTRL 0x41 + +#define CAPP_YUVOUT_MAIN I2C_REG(CAT_CAPT_PARM, CATB_YUVOUT_MAIN, 1) +#define REG_YUV422 0x00 +#define REG_BAYER10 0x05 +#define REG_BAYER8 0x06 +#define REG_JPEG 0x10 + +#define CAPP_MAIN_IMAGE_SIZE I2C_REG(CAT_CAPT_PARM, CATB_MAIN_IMAGE_SIZE, 1) + +#define CAPP_MCC_MODE I2C_REG(CAT_CAPT_PARM, CATB_MCC_MODE, 1) +#define REG_MCC_OFF 0x00 +#define REG_MCC_NORMAL 0x01 + +#define CAPP_WDR_EN I2C_REG(CAT_CAPT_PARM, CATB_WDR_EN, 1) +#define REG_WDR_OFF 0x00 +#define REG_WDR_ON 0x01 +#define REG_WDR_AUTO 0x02 + +#define CAPP_LIGHT_CTRL I2C_REG(CAT_CAPT_PARM, CATB_LIGHT_CTRL, 1) +#define REG_LIGHT_OFF 0x00 +#define REG_LIGHT_ON 0x01 +#define REG_LIGHT_AUTO 0x02 + +#define CAPP_FLASH_CTRL I2C_REG(CAT_CAPT_PARM, CATB_FLASH_CTRL, 1) +#define REG_FLASH_OFF 0x00 +#define REG_FLASH_ON 0x01 +#define REG_FLASH_AUTO 0x02 + +/* + * Category C - CAPTURE Control + */ +#define CATC_CAP_MODE 0x00 +#define CATC_CAP_SEL_FRAME 0x06 /* It determines Single or Multi */ +#define CATC_CAP_START 0x09 +#define CATC_CAP_IMAGE_SIZE 0x0d +#define CATC_CAP_THUMB_SIZE 0x11 + +#define CAPC_MODE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_MODE, 1) +#define REG_CAP_NONE 0x00 +#define REG_CAP_ANTI_SHAKE 0x02 + +#define CAPC_SEL_FRAME I2C_REG(CAT_CAPT_CTRL, CATC_CAP_SEL_FRAME, 1) + +#define CAPC_START I2C_REG(CAT_CAPT_CTRL, CATC_CAP_START, 1) +#define REG_CAP_START_MAIN 0x01 +#define REG_CAP_START_THUMB 0x03 + +#define CAPC_IMAGE_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_IMAGE_SIZE, 1) +#define CAPC_THUMB_SIZE I2C_REG(CAT_CAPT_CTRL, CATC_CAP_THUMB_SIZE, 1) + +/* + * Category F - Flash + * + * This mode provides functions about internal flash stuff and system startup. + */ +#define CATF_CAM_START 0x12 /* It starts internal ARM core booting + * after power-up */ + +#define FLASH_CAM_START I2C_REG(CAT_FLASH, CATF_CAM_START, 1) +#define REG_START_ARM_BOOT 0x01 + +#endif /* M5MOLS_REG_H */ diff --git a/include/media/m5mols.h b/include/media/m5mols.h new file mode 100644 index 000000000000..2d7e7ca2313d --- /dev/null +++ b/include/media/m5mols.h @@ -0,0 +1,35 @@ +/* + * Driver header for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim, riverful.kim@samsung.com + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef MEDIA_M5MOLS_H +#define MEDIA_M5MOLS_H + +/** + * struct m5mols_platform_data - platform data for M-5MOLS driver + * @irq: GPIO getting the irq pin of M-5MOLS + * @gpio_reset: GPIO driving the reset pin of M-5MOLS + * @reset_polarity: active state for gpio_rst pin, 0 or 1 + * @set_power: an additional callback to the board setup code + * to be called after enabling and before disabling + * the sensor's supply regulators + */ +struct m5mols_platform_data { + int irq; + int gpio_reset; + u8 reset_polarity; + int (*set_power)(struct device *dev, int on); +}; + +#endif /* MEDIA_M5MOLS_H */ -- cgit v1.2.3 From 0017505de0d2888f57a9f84e8eb3963b3cd28baf Mon Sep 17 00:00:00 2001 From: "Igor M. Liplianin" Date: Thu, 5 May 2011 16:35:01 -0300 Subject: [media] dm1105: GPIO handling added, I2C on GPIO added, LNB control through GPIO reworked Here is patch for GPIO's handling. It allows to support I2C on GPIO's and per board LNB control through GPIO's. Also incuded some support for Hendrik Skarpeid card. For those, who needs to tweak the driver, I think it is clear how to change and test GPIO's for LNB and other GPIO related stuff now. [mchehab@redhat.com: I2C_CLASS_TV_DIGITAL is deprecated. removed to avoid breaking compilation] Signed-off-by: Igor M. Liplianin Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dm1105/dm1105.c | 272 +++++++++++++++++++++++++++++++++----- 1 file changed, 236 insertions(+), 36 deletions(-) diff --git a/drivers/media/dvb/dm1105/dm1105.c b/drivers/media/dvb/dm1105/dm1105.c index 2d8b4044be36..b2b0c45f32a9 100644 --- a/drivers/media/dvb/dm1105/dm1105.c +++ b/drivers/media/dvb/dm1105/dm1105.c @@ -20,6 +20,7 @@ */ #include +#include #include #include #include @@ -49,11 +50,12 @@ #define UNSET (-1U) -#define DM1105_BOARD_NOAUTO UNSET -#define DM1105_BOARD_UNKNOWN 0 -#define DM1105_BOARD_DVBWORLD_2002 1 -#define DM1105_BOARD_DVBWORLD_2004 2 -#define DM1105_BOARD_AXESS_DM05 3 +#define DM1105_BOARD_NOAUTO UNSET +#define DM1105_BOARD_UNKNOWN 0 +#define DM1105_BOARD_DVBWORLD_2002 1 +#define DM1105_BOARD_DVBWORLD_2004 2 +#define DM1105_BOARD_AXESS_DM05 3 +#define DM1105_BOARD_UNBRANDED_I2C_ON_GPIO 4 /* ----------------------------------------------- */ /* @@ -157,22 +159,38 @@ #define DM1105_MAX 0x04 #define DRIVER_NAME "dm1105" +#define DM1105_I2C_GPIO_NAME "dm1105-gpio" #define DM1105_DMA_PACKETS 47 #define DM1105_DMA_PACKET_LENGTH (128*4) #define DM1105_DMA_BYTES (128 * 4 * DM1105_DMA_PACKETS) +/* */ +#define GPIO08 (1 << 8) +#define GPIO13 (1 << 13) +#define GPIO14 (1 << 14) +#define GPIO15 (1 << 15) +#define GPIO16 (1 << 16) +#define GPIO17 (1 << 17) +#define GPIO_ALL 0x03ffff + /* GPIO's for LNB power control */ -#define DM1105_LNB_MASK 0x00000000 -#define DM1105_LNB_OFF 0x00020000 -#define DM1105_LNB_13V 0x00010100 -#define DM1105_LNB_18V 0x00000100 +#define DM1105_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13)) +#define DM1105_LNB_OFF GPIO17 +#define DM1105_LNB_13V (GPIO16 | GPIO08) +#define DM1105_LNB_18V GPIO08 /* GPIO's for LNB power control for Axess DM05 */ -#define DM05_LNB_MASK 0x00000000 -#define DM05_LNB_OFF 0x00020000/* actually 13v */ -#define DM05_LNB_13V 0x00020000 -#define DM05_LNB_18V 0x00030000 +#define DM05_LNB_MASK (GPIO_ALL & ~(GPIO14 | GPIO13)) +#define DM05_LNB_OFF GPIO17/* actually 13v */ +#define DM05_LNB_13V GPIO17 +#define DM05_LNB_18V (GPIO17 | GPIO16) + +/* GPIO's for LNB power control for unbranded with I2C on GPIO */ +#define UNBR_LNB_MASK (GPIO17 | GPIO16) +#define UNBR_LNB_OFF 0 +#define UNBR_LNB_13V GPIO17 +#define UNBR_LNB_18V (GPIO17 | GPIO16) static unsigned int card[] = {[0 ... 3] = UNSET }; module_param_array(card, int, NULL, 0444); @@ -187,7 +205,11 @@ static unsigned int dm1105_devcount; DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct dm1105_board { - char *name; + char *name; + struct { + u32 mask, off, v13, v18; + } lnb; + u32 gpio_scl, gpio_sda; }; struct dm1105_subid { @@ -199,15 +221,50 @@ struct dm1105_subid { static const struct dm1105_board dm1105_boards[] = { [DM1105_BOARD_UNKNOWN] = { .name = "UNKNOWN/GENERIC", + .lnb = { + .mask = DM1105_LNB_MASK, + .off = DM1105_LNB_OFF, + .v13 = DM1105_LNB_13V, + .v18 = DM1105_LNB_18V, + }, }, [DM1105_BOARD_DVBWORLD_2002] = { .name = "DVBWorld PCI 2002", + .lnb = { + .mask = DM1105_LNB_MASK, + .off = DM1105_LNB_OFF, + .v13 = DM1105_LNB_13V, + .v18 = DM1105_LNB_18V, + }, }, [DM1105_BOARD_DVBWORLD_2004] = { .name = "DVBWorld PCI 2004", + .lnb = { + .mask = DM1105_LNB_MASK, + .off = DM1105_LNB_OFF, + .v13 = DM1105_LNB_13V, + .v18 = DM1105_LNB_18V, + }, }, [DM1105_BOARD_AXESS_DM05] = { .name = "Axess/EasyTv DM05", + .lnb = { + .mask = DM05_LNB_MASK, + .off = DM05_LNB_OFF, + .v13 = DM05_LNB_13V, + .v18 = DM05_LNB_18V, + }, + }, + [DM1105_BOARD_UNBRANDED_I2C_ON_GPIO] = { + .name = "Unbranded DM1105 with i2c on GPIOs", + .lnb = { + .mask = UNBR_LNB_MASK, + .off = UNBR_LNB_OFF, + .v13 = UNBR_LNB_13V, + .v18 = UNBR_LNB_18V, + }, + .gpio_scl = GPIO14, + .gpio_sda = GPIO13, }, }; @@ -293,6 +350,8 @@ struct dm1105_dev { /* i2c */ struct i2c_adapter i2c_adap; + struct i2c_adapter i2c_bb_adap; + struct i2c_algo_bit_data i2c_bit; /* irq */ struct work_struct work; @@ -328,6 +387,103 @@ struct dm1105_dev { #define dm_setl(reg, bit) dm_andorl((reg), (bit), (bit)) #define dm_clearl(reg, bit) dm_andorl((reg), (bit), 0) +/* The chip has 18 GPIOs. In HOST mode GPIO's used as 15 bit address lines, + so we can use only 3 GPIO's from GPIO15 to GPIO17. + Here I don't check whether HOST is enebled as it is not implemented yet. + */ +static void dm1105_gpio_set(struct dm1105_dev *dev, u32 mask) +{ + if (mask & 0xfffc0000) + printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); + + if (mask & 0x0003ffff) + dm_setl(DM1105_GPIOVAL, mask & 0x0003ffff); + +} + +static void dm1105_gpio_clear(struct dm1105_dev *dev, u32 mask) +{ + if (mask & 0xfffc0000) + printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); + + if (mask & 0x0003ffff) + dm_clearl(DM1105_GPIOVAL, mask & 0x0003ffff); + +} + +static void dm1105_gpio_andor(struct dm1105_dev *dev, u32 mask, u32 val) +{ + if (mask & 0xfffc0000) + printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); + + if (mask & 0x0003ffff) + dm_andorl(DM1105_GPIOVAL, mask & 0x0003ffff, val); + +} + +static u32 dm1105_gpio_get(struct dm1105_dev *dev, u32 mask) +{ + if (mask & 0xfffc0000) + printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); + + if (mask & 0x0003ffff) + return dm_readl(DM1105_GPIOVAL) & mask & 0x0003ffff; + + return 0; +} + +static void dm1105_gpio_enable(struct dm1105_dev *dev, u32 mask, int asoutput) +{ + if (mask & 0xfffc0000) + printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__); + + if ((mask & 0x0003ffff) && asoutput) + dm_clearl(DM1105_GPIOCTR, mask & 0x0003ffff); + else if ((mask & 0x0003ffff) && !asoutput) + dm_setl(DM1105_GPIOCTR, mask & 0x0003ffff); + +} + +static void dm1105_setline(struct dm1105_dev *dev, u32 line, int state) +{ + if (state) + dm1105_gpio_enable(dev, line, 0); + else { + dm1105_gpio_enable(dev, line, 1); + dm1105_gpio_clear(dev, line); + } +} + +static void dm1105_setsda(void *data, int state) +{ + struct dm1105_dev *dev = data; + + dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_sda, state); +} + +static void dm1105_setscl(void *data, int state) +{ + struct dm1105_dev *dev = data; + + dm1105_setline(dev, dm1105_boards[dev->boardnr].gpio_scl, state); +} + +static int dm1105_getsda(void *data) +{ + struct dm1105_dev *dev = data; + + return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_sda) + ? 1 : 0; +} + +static int dm1105_getscl(void *data) +{ + struct dm1105_dev *dev = data; + + return dm1105_gpio_get(dev, dm1105_boards[dev->boardnr].gpio_scl) + ? 1 : 0; +} + static int dm1105_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) { @@ -436,31 +592,20 @@ static inline struct dm1105_dev *frontend_to_dm1105_dev(struct dvb_frontend *fe) static int dm1105_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { struct dm1105_dev *dev = frontend_to_dm1105_dev(fe); - u32 lnb_mask, lnb_13v, lnb_18v, lnb_off; - switch (dev->boardnr) { - case DM1105_BOARD_AXESS_DM05: - lnb_mask = DM05_LNB_MASK; - lnb_off = DM05_LNB_OFF; - lnb_13v = DM05_LNB_13V; - lnb_18v = DM05_LNB_18V; - break; - case DM1105_BOARD_DVBWORLD_2002: - case DM1105_BOARD_DVBWORLD_2004: - default: - lnb_mask = DM1105_LNB_MASK; - lnb_off = DM1105_LNB_OFF; - lnb_13v = DM1105_LNB_13V; - lnb_18v = DM1105_LNB_18V; - } - - dm_writel(DM1105_GPIOCTR, lnb_mask); + dm1105_gpio_enable(dev, dm1105_boards[dev->boardnr].lnb.mask, 1); if (voltage == SEC_VOLTAGE_18) - dm_writel(DM1105_GPIOVAL, lnb_18v); + dm1105_gpio_andor(dev, + dm1105_boards[dev->boardnr].lnb.mask, + dm1105_boards[dev->boardnr].lnb.v18); else if (voltage == SEC_VOLTAGE_13) - dm_writel(DM1105_GPIOVAL, lnb_13v); + dm1105_gpio_andor(dev, + dm1105_boards[dev->boardnr].lnb.mask, + dm1105_boards[dev->boardnr].lnb.v13); else - dm_writel(DM1105_GPIOVAL, lnb_off); + dm1105_gpio_andor(dev, + dm1105_boards[dev->boardnr].lnb.mask, + dm1105_boards[dev->boardnr].lnb.off); return 0; } @@ -708,6 +853,38 @@ static int __devinit frontend_init(struct dm1105_dev *dev) int ret; switch (dev->boardnr) { + case DM1105_BOARD_UNBRANDED_I2C_ON_GPIO: + dm1105_gpio_enable(dev, GPIO15, 1); + dm1105_gpio_clear(dev, GPIO15); + msleep(100); + dm1105_gpio_set(dev, GPIO15); + msleep(200); + dev->fe = dvb_attach( + stv0299_attach, &sharp_z0194a_config, + &dev->i2c_bb_adap); + if (dev->fe) { + dev->fe->ops.set_voltage = dm1105_set_voltage; + dvb_attach(dvb_pll_attach, dev->fe, 0x60, + &dev->i2c_bb_adap, DVB_PLL_OPERA1); + break; + } + + dev->fe = dvb_attach( + stv0288_attach, &earda_config, + &dev->i2c_bb_adap); + if (dev->fe) { + dev->fe->ops.set_voltage = dm1105_set_voltage; + dvb_attach(stb6000_attach, dev->fe, 0x61, + &dev->i2c_bb_adap); + break; + } + + dev->fe = dvb_attach( + si21xx_attach, &serit_config, + &dev->i2c_bb_adap); + if (dev->fe) + dev->fe->ops.set_voltage = dm1105_set_voltage; + break; case DM1105_BOARD_DVBWORLD_2004: dev->fe = dvb_attach( cx24116_attach, &serit_sp2633_config, @@ -870,11 +1047,32 @@ static int __devinit dm1105_probe(struct pci_dev *pdev, if (ret < 0) goto err_dm1105_hw_exit; + i2c_set_adapdata(&dev->i2c_bb_adap, dev); + strcpy(dev->i2c_bb_adap.name, DM1105_I2C_GPIO_NAME); + dev->i2c_bb_adap.owner = THIS_MODULE; + dev->i2c_bb_adap.dev.parent = &pdev->dev; + dev->i2c_bb_adap.algo_data = &dev->i2c_bit; + dev->i2c_bit.data = dev; + dev->i2c_bit.setsda = dm1105_setsda; + dev->i2c_bit.setscl = dm1105_setscl; + dev->i2c_bit.getsda = dm1105_getsda; + dev->i2c_bit.getscl = dm1105_getscl; + dev->i2c_bit.udelay = 10; + dev->i2c_bit.timeout = 10; + + /* Raise SCL and SDA */ + dm1105_setsda(dev, 1); + dm1105_setscl(dev, 1); + + ret = i2c_bit_add_bus(&dev->i2c_bb_adap); + if (ret < 0) + goto err_i2c_del_adapter; + /* dvb */ ret = dvb_register_adapter(&dev->dvb_adapter, DRIVER_NAME, THIS_MODULE, &pdev->dev, adapter_nr); if (ret < 0) - goto err_i2c_del_adapter; + goto err_i2c_del_adapters; dvb_adapter = &dev->dvb_adapter; @@ -952,6 +1150,8 @@ err_dvb_dmx_release: dvb_dmx_release(dvbdemux); err_dvb_unregister_adapter: dvb_unregister_adapter(dvb_adapter); +err_i2c_del_adapters: + i2c_del_adapter(&dev->i2c_bb_adap); err_i2c_del_adapter: i2c_del_adapter(&dev->i2c_adap); err_dm1105_hw_exit: -- cgit v1.2.3 From c9d5d7790cd7c9457772dc51381f0e0e4e691f68 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 22 May 2011 21:34:12 -0300 Subject: [media] fix kconfig dependency warning for VIDEO_TIMBERDALE Fix kconfig unmet dependency warning: warning: (VIDEO_TIMBERDALE) selects TIMB_DMA which has unmet direct dependencies (DMADEVICES && (MFD_TIMBERDALE || HAS_IOMEM)) Signed-off-by: Randy Dunlap Cc: Pelagicore AB Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 47bfd323a9e5..cf5a1f6abedf 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -687,7 +687,7 @@ config VIDEO_HEXIUM_GEMINI config VIDEO_TIMBERDALE tristate "Support for timberdale Video In/LogiWIN" - depends on VIDEO_V4L2 && I2C + depends on VIDEO_V4L2 && I2C && DMADEVICES select DMA_ENGINE select TIMB_DMA select VIDEO_ADV7180 -- cgit v1.2.3 From c6ae804a65649d5919d232d65dc6a08c9e5ac01b Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Thu, 5 May 2011 04:37:28 -0300 Subject: [media] wl12xx: g_volatile_ctrl fix: wrong field set The function g_volatile_ctrl should change the current value rather than the new value. These two drivers didn't do that, so the value is never reported correctly. In the future this will change since this behavior is clearly unexpected, but for now fix these drivers first. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- drivers/media/radio/radio-wl1273.c | 2 +- drivers/media/radio/wl128x/fmdrv_v4l2.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/radio/radio-wl1273.c b/drivers/media/radio/radio-wl1273.c index e2550dc2944f..9dbbd31b5ba2 100644 --- a/drivers/media/radio/radio-wl1273.c +++ b/drivers/media/radio/radio-wl1273.c @@ -1382,7 +1382,7 @@ static int wl1273_fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl) switch (ctrl->id) { case V4L2_CID_TUNE_ANTENNA_CAPACITOR: - ctrl->val = wl1273_fm_get_tx_ctune(radio); + ctrl->cur.val = wl1273_fm_get_tx_ctune(radio); break; default: diff --git a/drivers/media/radio/wl128x/fmdrv_v4l2.c b/drivers/media/radio/wl128x/fmdrv_v4l2.c index d50e5ac75ab6..87010724f914 100644 --- a/drivers/media/radio/wl128x/fmdrv_v4l2.c +++ b/drivers/media/radio/wl128x/fmdrv_v4l2.c @@ -191,7 +191,7 @@ static int fm_g_volatile_ctrl(struct v4l2_ctrl *ctrl) switch (ctrl->id) { case V4L2_CID_TUNE_ANTENNA_CAPACITOR: - ctrl->val = fm_tx_get_tune_cap_val(fmdev); + ctrl->cur.val = fm_tx_get_tune_cap_val(fmdev); break; default: fmwarn("%s: Unknown IOCTL: %d\n", __func__, ctrl->id); -- cgit v1.2.3 From 5f1e15868871a9da820357e0e3ff6fe89d2a16a6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 23 May 2011 07:12:27 -0300 Subject: [media] Media DocBook: fix validation errors Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/dvb/dvbproperty.xml | 5 ++++- Documentation/DocBook/v4l/subdev-formats.xml | 10 +++++----- 2 files changed, 9 insertions(+), 6 deletions(-) diff --git a/Documentation/DocBook/dvb/dvbproperty.xml b/Documentation/DocBook/dvb/dvbproperty.xml index 52d5e3c7cf6c..b5365f61d69b 100644 --- a/Documentation/DocBook/dvb/dvbproperty.xml +++ b/Documentation/DocBook/dvb/dvbproperty.xml @@ -141,13 +141,15 @@ struct dtv_properties { +
+ Property types On FE_GET_PROPERTY/FE_SET_PROPERTY, the actual action is determined by the dtv_property cmd/data pairs. With one single ioctl, is possible to get/set up to 64 properties. The actual meaning of each property is described on the next sections. -The Available frontend property types are: +The available frontend property types are: #define DTV_UNDEFINED 0 #define DTV_TUNE 1 @@ -193,6 +195,7 @@ get/set up to 64 properties. The actual meaning of each property is described on #define DTV_ISDBT_LAYER_ENABLED 41 #define DTV_ISDBS_TS_ID 42 +
Parameters that are common to all Digital TV standards diff --git a/Documentation/DocBook/v4l/subdev-formats.xml b/Documentation/DocBook/v4l/subdev-formats.xml index a26b10c07857..8d3409d2c632 100644 --- a/Documentation/DocBook/v4l/subdev-formats.xml +++ b/Documentation/DocBook/v4l/subdev-formats.xml @@ -2531,13 +2531,13 @@ _JPEG prefix the format code is made of the following information. - The number of bus samples per entropy encoded byte. - The bus width. + The number of bus samples per entropy encoded byte. + The bus width. + - For instance, for a JPEG baseline process and an 8-bit bus width - the format will be named V4L2_MBUS_FMT_JPEG_1X8. - + For instance, for a JPEG baseline process and an 8-bit bus width + the format will be named V4L2_MBUS_FMT_JPEG_1X8. The following table lists existing JPEG compressed formats. -- cgit v1.2.3 From 2a919596c16b4333af851ff473ebf96e289ab90c Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Wed, 11 May 2011 12:50:28 -0500 Subject: x86, UV: Add support for SGI UV2 hub chip This patch adds support for a new version of the SGI UV hub chip. The hub chip is the node controller that connects multiple blades into a larger coherent SSI. For the most part, UV2 is compatible with UV1. The majority of the changes are in the addresses of MMRs and in a few cases, the contents of MMRs. These changes are the result in changes in the system topology such as node configuration, processor types, maximum nodes, physical address sizes, etc. Signed-off-by: Jack Steiner Link: http://lkml.kernel.org/r/20110511175028.GA18006@sgi.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uv/uv_bau.h | 42 +- arch/x86/include/asm/uv/uv_hub.h | 71 ++- arch/x86/include/asm/uv/uv_mmrs.h | 1012 +++++++++++++++++++++++++++++------- arch/x86/kernel/apic/x2apic_uv_x.c | 40 +- arch/x86/platform/uv/tlb_uv.c | 132 ++++- arch/x86/platform/uv/uv_time.c | 16 +- 6 files changed, 1075 insertions(+), 238 deletions(-) diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 130f1eeee5fe..0652a5a9fd62 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -44,7 +44,10 @@ #define UV_ACT_STATUS_SIZE 2 #define UV_DISTRIBUTION_SIZE 256 #define UV_SW_ACK_NPENDING 8 -#define UV_NET_ENDPOINT_INTD 0x38 +#define UV1_NET_ENDPOINT_INTD 0x38 +#define UV2_NET_ENDPOINT_INTD 0x28 +#define UV_NET_ENDPOINT_INTD (is_uv1_hub() ? \ + UV1_NET_ENDPOINT_INTD : UV2_NET_ENDPOINT_INTD) #define UV_DESC_BASE_PNODE_SHIFT 49 #define UV_PAYLOADQ_PNODE_SHIFT 49 #define UV_PTC_BASENAME "sgi_uv/ptc_statistics" @@ -53,10 +56,22 @@ #define UV_BAU_TUNABLES_FILE "bau_tunables" #define WHITESPACE " \t\n" #define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask)) -#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15 -#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16 -#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x0000000009UL + + /* [19:16] SOFT_ACK timeout period 19: 1 is urgency 7 17:16 1 is multiplier */ +/* + * UV2: Bit 19 selects between + * (0): 10 microsecond timebase and + * (1): 80 microseconds + * we're using 655us, similar to UV1: 65 units of 10us + */ +#define UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD (9UL) +#define UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD (65*10UL) + +#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD (is_uv1_hub() ? \ + UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD : \ + UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD) + #define BAU_MISC_CONTROL_MULT_MASK 3 #define UVH_AGING_PRESCALE_SEL 0x000000b000UL @@ -76,6 +91,16 @@ #define DESC_STATUS_ACTIVE 1 #define DESC_STATUS_DESTINATION_TIMEOUT 2 #define DESC_STATUS_SOURCE_TIMEOUT 3 +/* + * bits put together from HRP_LB_BAU_SB_ACTIVATION_STATUS_0/1/2 + * values 1 and 5 will not occur + */ +#define UV2H_DESC_IDLE 0 +#define UV2H_DESC_DEST_TIMEOUT 2 +#define UV2H_DESC_DEST_STRONG_NACK 3 +#define UV2H_DESC_BUSY 4 +#define UV2H_DESC_SOURCE_TIMEOUT 6 +#define UV2H_DESC_DEST_PUT_ERR 7 /* * delay for 'plugged' timeout retries, in microseconds @@ -96,6 +121,15 @@ #define UV_LB_SUBNODEID 0x10 +/* these two are the same for UV1 and UV2: */ +#define UV_SA_SHFT UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT +#define UV_SA_MASK UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK +/* 4 bits of software ack period */ +#define UV2_ACK_MASK 0x7UL +#define UV2_ACK_UNITS_SHFT 3 +#define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT +#define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT + /* * number of entries in the destination side payload queue */ diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 4298002d0c83..f26544a15214 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -77,8 +77,9 @@ * * 1111110000000000 * 5432109876543210 - * pppppppppplc0cch Nehalem-EX - * ppppppppplcc0cch Westmere-EX + * pppppppppplc0cch Nehalem-EX (12 bits in hdw reg) + * ppppppppplcc0cch Westmere-EX (12 bits in hdw reg) + * pppppppppppcccch SandyBridge (15 bits in hdw reg) * sssssssssss * * p = pnode bits @@ -87,7 +88,7 @@ * h = hyperthread * s = bits that are in the SOCKET_ID CSR * - * Note: Processor only supports 12 bits in the APICID register. The ACPI + * Note: Processor may support fewer bits in the APICID register. The ACPI * tables hold all 16 bits. Software needs to be aware of this. * * Unless otherwise specified, all references to APICID refer to @@ -138,6 +139,8 @@ struct uv_hub_info_s { unsigned long global_mmr_base; unsigned long gpa_mask; unsigned int gnode_extra; + unsigned char hub_revision; + unsigned char apic_pnode_shift; unsigned long gnode_upper; unsigned long lowmem_remap_top; unsigned long lowmem_remap_base; @@ -149,13 +152,31 @@ struct uv_hub_info_s { unsigned char m_val; unsigned char n_val; struct uv_scir_s scir; - unsigned char apic_pnode_shift; }; DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); #define uv_hub_info (&__get_cpu_var(__uv_hub_info)) #define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu)) +/* + * Hub revisions less than UV2_HUB_REVISION_BASE are UV1 hubs. All UV2 + * hubs have revision numbers greater than or equal to UV2_HUB_REVISION_BASE. + * This is a software convention - NOT the hardware revision numbers in + * the hub chip. + */ +#define UV1_HUB_REVISION_BASE 1 +#define UV2_HUB_REVISION_BASE 3 + +static inline int is_uv1_hub(void) +{ + return uv_hub_info->hub_revision < UV2_HUB_REVISION_BASE; +} + +static inline int is_uv2_hub(void) +{ + return uv_hub_info->hub_revision >= UV2_HUB_REVISION_BASE; +} + union uvh_apicid { unsigned long v; struct uvh_apicid_s { @@ -180,11 +201,25 @@ union uvh_apicid { #define UV_PNODE_TO_GNODE(p) ((p) |uv_hub_info->gnode_extra) #define UV_PNODE_TO_NASID(p) (UV_PNODE_TO_GNODE(p) << 1) -#define UV_LOCAL_MMR_BASE 0xf4000000UL -#define UV_GLOBAL_MMR32_BASE 0xf8000000UL +#define UV1_LOCAL_MMR_BASE 0xf4000000UL +#define UV1_GLOBAL_MMR32_BASE 0xf8000000UL +#define UV1_LOCAL_MMR_SIZE (64UL * 1024 * 1024) +#define UV1_GLOBAL_MMR32_SIZE (64UL * 1024 * 1024) + +#define UV2_LOCAL_MMR_BASE 0xfa000000UL +#define UV2_GLOBAL_MMR32_BASE 0xfc000000UL +#define UV2_LOCAL_MMR_SIZE (32UL * 1024 * 1024) +#define UV2_GLOBAL_MMR32_SIZE (32UL * 1024 * 1024) + +#define UV_LOCAL_MMR_BASE (is_uv1_hub() ? UV1_LOCAL_MMR_BASE \ + : UV2_LOCAL_MMR_BASE) +#define UV_GLOBAL_MMR32_BASE (is_uv1_hub() ? UV1_GLOBAL_MMR32_BASE \ + : UV2_GLOBAL_MMR32_BASE) +#define UV_LOCAL_MMR_SIZE (is_uv1_hub() ? UV1_LOCAL_MMR_SIZE : \ + UV2_LOCAL_MMR_SIZE) +#define UV_GLOBAL_MMR32_SIZE (is_uv1_hub() ? UV1_GLOBAL_MMR32_SIZE :\ + UV2_GLOBAL_MMR32_SIZE) #define UV_GLOBAL_MMR64_BASE (uv_hub_info->global_mmr_base) -#define UV_LOCAL_MMR_SIZE (64UL * 1024 * 1024) -#define UV_GLOBAL_MMR32_SIZE (64UL * 1024 * 1024) #define UV_GLOBAL_GRU_MMR_BASE 0x4000000 @@ -300,6 +335,17 @@ static inline int uv_apicid_to_pnode(int apicid) return (apicid >> uv_hub_info->apic_pnode_shift); } +/* + * Convert an apicid to the socket number on the blade + */ +static inline int uv_apicid_to_socket(int apicid) +{ + if (is_uv1_hub()) + return (apicid >> (uv_hub_info->apic_pnode_shift - 1)) & 1; + else + return 0; +} + /* * Access global MMRs using the low memory MMR32 space. This region supports * faster MMR access but not all MMRs are accessible in this space. @@ -519,14 +565,13 @@ static inline void uv_hub_send_ipi(int pnode, int apicid, int vector) /* * Get the minimum revision number of the hub chips within the partition. - * 1 - initial rev 1.0 silicon - * 2 - rev 2.0 production silicon + * 1 - UV1 rev 1.0 initial silicon + * 2 - UV1 rev 2.0 production silicon + * 3 - UV2 rev 1.0 initial silicon */ static inline int uv_get_min_hub_revision_id(void) { - extern int uv_min_hub_revision_id; - - return uv_min_hub_revision_id; + return uv_hub_info->hub_revision; } #endif /* CONFIG_X86_64 */ diff --git a/arch/x86/include/asm/uv/uv_mmrs.h b/arch/x86/include/asm/uv/uv_mmrs.h index f5bb64a823d7..4be52c863448 100644 --- a/arch/x86/include/asm/uv/uv_mmrs.h +++ b/arch/x86/include/asm/uv/uv_mmrs.h @@ -11,13 +11,64 @@ #ifndef _ASM_X86_UV_UV_MMRS_H #define _ASM_X86_UV_UV_MMRS_H +/* + * This file contains MMR definitions for both UV1 & UV2 hubs. + * + * In general, MMR addresses and structures are identical on both hubs. + * These MMRs are identified as: + * #define UVH_xxx
+ * union uvh_xxx { + * unsigned long v; + * struct uvh_int_cmpd_s { + * } s; + * }; + * + * If the MMR exists on both hub type but has different addresses or + * contents, the MMR definition is similar to: + * #define UV1H_xxx + * #define UV2H_xxx + * #define UVH_xxx (is_uv1_hub() ? UV1H_xxx : UV2H_xxx) + * union uvh_xxx { + * unsigned long v; + * struct uv1h_int_cmpd_s { (Common fields only) + * } s; + * struct uv1h_int_cmpd_s { (Full UV1 definition) + * } s1; + * struct uv2h_int_cmpd_s { (Full UV2 definition) + * } s2; + * }; + * + * Only essential difference are enumerated. For example, if the address is + * the same for both UV1 & UV2, only a single #define is generated. Likewise, + * if the contents is the same for both hubs, only the "s" structure is + * generated. + * + * If the MMR exists on ONLY 1 type of hub, no generic definition is + * generated: + * #define UVnH_xxx + * union uvnh_xxx { + * unsigned long v; + * struct uvh_int_cmpd_s { + * } sn; + * }; + */ + #define UV_MMR_ENABLE (1UL << 63) +#define UV1_HUB_PART_NUMBER 0x88a5 +#define UV2_HUB_PART_NUMBER 0x8eb8 + +/* Compat: if this #define is present, UV headers support UV2 */ +#define UV2_HUB_IS_SUPPORTED 1 + +/* KABI compat: if this #define is present, KABI hacks are present */ +#define UV2_HUB_KABI_HACKS 1 + /* ========================================================================= */ /* UVH_BAU_DATA_BROADCAST */ /* ========================================================================= */ #define UVH_BAU_DATA_BROADCAST 0x61688UL -#define UVH_BAU_DATA_BROADCAST_32 0x0440 +#define UVH_BAU_DATA_BROADCAST_32 0x440 #define UVH_BAU_DATA_BROADCAST_ENABLE_SHFT 0 #define UVH_BAU_DATA_BROADCAST_ENABLE_MASK 0x0000000000000001UL @@ -34,7 +85,7 @@ union uvh_bau_data_broadcast_u { /* UVH_BAU_DATA_CONFIG */ /* ========================================================================= */ #define UVH_BAU_DATA_CONFIG 0x61680UL -#define UVH_BAU_DATA_CONFIG_32 0x0438 +#define UVH_BAU_DATA_CONFIG_32 0x438 #define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0 #define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL @@ -73,125 +124,245 @@ union uvh_bau_data_config_u { /* UVH_EVENT_OCCURRED0 */ /* ========================================================================= */ #define UVH_EVENT_OCCURRED0 0x70000UL -#define UVH_EVENT_OCCURRED0_32 0x005e8 - -#define UVH_EVENT_OCCURRED0_LB_HCERR_SHFT 0 -#define UVH_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL -#define UVH_EVENT_OCCURRED0_GR0_HCERR_SHFT 1 -#define UVH_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL -#define UVH_EVENT_OCCURRED0_GR1_HCERR_SHFT 2 -#define UVH_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL -#define UVH_EVENT_OCCURRED0_LH_HCERR_SHFT 3 -#define UVH_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL -#define UVH_EVENT_OCCURRED0_RH_HCERR_SHFT 4 -#define UVH_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000010UL -#define UVH_EVENT_OCCURRED0_XN_HCERR_SHFT 5 -#define UVH_EVENT_OCCURRED0_XN_HCERR_MASK 0x0000000000000020UL -#define UVH_EVENT_OCCURRED0_SI_HCERR_SHFT 6 -#define UVH_EVENT_OCCURRED0_SI_HCERR_MASK 0x0000000000000040UL -#define UVH_EVENT_OCCURRED0_LB_AOERR0_SHFT 7 -#define UVH_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000080UL -#define UVH_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8 -#define UVH_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL -#define UVH_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9 -#define UVH_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL -#define UVH_EVENT_OCCURRED0_LH_AOERR0_SHFT 10 -#define UVH_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL -#define UVH_EVENT_OCCURRED0_RH_AOERR0_SHFT 11 -#define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL -#define UVH_EVENT_OCCURRED0_XN_AOERR0_SHFT 12 -#define UVH_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL -#define UVH_EVENT_OCCURRED0_SI_AOERR0_SHFT 13 -#define UVH_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL -#define UVH_EVENT_OCCURRED0_LB_AOERR1_SHFT 14 -#define UVH_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL -#define UVH_EVENT_OCCURRED0_GR0_AOERR1_SHFT 15 -#define UVH_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000000008000UL -#define UVH_EVENT_OCCURRED0_GR1_AOERR1_SHFT 16 -#define UVH_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000000010000UL -#define UVH_EVENT_OCCURRED0_LH_AOERR1_SHFT 17 -#define UVH_EVENT_OCCURRED0_LH_AOERR1_MASK 0x0000000000020000UL -#define UVH_EVENT_OCCURRED0_RH_AOERR1_SHFT 18 -#define UVH_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000040000UL -#define UVH_EVENT_OCCURRED0_XN_AOERR1_SHFT 19 -#define UVH_EVENT_OCCURRED0_XN_AOERR1_MASK 0x0000000000080000UL -#define UVH_EVENT_OCCURRED0_SI_AOERR1_SHFT 20 -#define UVH_EVENT_OCCURRED0_SI_AOERR1_MASK 0x0000000000100000UL -#define UVH_EVENT_OCCURRED0_RH_VPI_INT_SHFT 21 -#define UVH_EVENT_OCCURRED0_RH_VPI_INT_MASK 0x0000000000200000UL -#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 22 -#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 23 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000000800000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 24 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000001000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 25 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000002000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 26 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000004000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 27 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000000008000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 28 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000000010000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 29 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000000020000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 30 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000000040000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 31 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000000080000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 32 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000000100000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 33 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000000200000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 34 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000000400000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 35 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000000800000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 36 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000001000000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 37 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000002000000000UL -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 38 -#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000004000000000UL -#define UVH_EVENT_OCCURRED0_L1_NMI_INT_SHFT 39 -#define UVH_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0000008000000000UL -#define UVH_EVENT_OCCURRED0_STOP_CLOCK_SHFT 40 -#define UVH_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0000010000000000UL -#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 41 -#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0000020000000000UL -#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 42 -#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0000040000000000UL -#define UVH_EVENT_OCCURRED0_LTC_INT_SHFT 43 -#define UVH_EVENT_OCCURRED0_LTC_INT_MASK 0x0000080000000000UL -#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 44 -#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL -#define UVH_EVENT_OCCURRED0_IPI_INT_SHFT 45 -#define UVH_EVENT_OCCURRED0_IPI_INT_MASK 0x0000200000000000UL -#define UVH_EVENT_OCCURRED0_EXTIO_INT0_SHFT 46 -#define UVH_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0000400000000000UL -#define UVH_EVENT_OCCURRED0_EXTIO_INT1_SHFT 47 -#define UVH_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0000800000000000UL -#define UVH_EVENT_OCCURRED0_EXTIO_INT2_SHFT 48 -#define UVH_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0001000000000000UL -#define UVH_EVENT_OCCURRED0_EXTIO_INT3_SHFT 49 -#define UVH_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0002000000000000UL -#define UVH_EVENT_OCCURRED0_PROFILE_INT_SHFT 50 -#define UVH_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0004000000000000UL -#define UVH_EVENT_OCCURRED0_RTC0_SHFT 51 -#define UVH_EVENT_OCCURRED0_RTC0_MASK 0x0008000000000000UL -#define UVH_EVENT_OCCURRED0_RTC1_SHFT 52 -#define UVH_EVENT_OCCURRED0_RTC1_MASK 0x0010000000000000UL -#define UVH_EVENT_OCCURRED0_RTC2_SHFT 53 -#define UVH_EVENT_OCCURRED0_RTC2_MASK 0x0020000000000000UL -#define UVH_EVENT_OCCURRED0_RTC3_SHFT 54 -#define UVH_EVENT_OCCURRED0_RTC3_MASK 0x0040000000000000UL -#define UVH_EVENT_OCCURRED0_BAU_DATA_SHFT 55 -#define UVH_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL -#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56 -#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL +#define UVH_EVENT_OCCURRED0_32 0x5e8 + +#define UV1H_EVENT_OCCURRED0_LB_HCERR_SHFT 0 +#define UV1H_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL +#define UV1H_EVENT_OCCURRED0_GR0_HCERR_SHFT 1 +#define UV1H_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL +#define UV1H_EVENT_OCCURRED0_GR1_HCERR_SHFT 2 +#define UV1H_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL +#define UV1H_EVENT_OCCURRED0_LH_HCERR_SHFT 3 +#define UV1H_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL +#define UV1H_EVENT_OCCURRED0_RH_HCERR_SHFT 4 +#define UV1H_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000010UL +#define UV1H_EVENT_OCCURRED0_XN_HCERR_SHFT 5 +#define UV1H_EVENT_OCCURRED0_XN_HCERR_MASK 0x0000000000000020UL +#define UV1H_EVENT_OCCURRED0_SI_HCERR_SHFT 6 +#define UV1H_EVENT_OCCURRED0_SI_HCERR_MASK 0x0000000000000040UL +#define UV1H_EVENT_OCCURRED0_LB_AOERR0_SHFT 7 +#define UV1H_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000080UL +#define UV1H_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8 +#define UV1H_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL +#define UV1H_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9 +#define UV1H_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL +#define UV1H_EVENT_OCCURRED0_LH_AOERR0_SHFT 10 +#define UV1H_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL +#define UV1H_EVENT_OCCURRED0_RH_AOERR0_SHFT 11 +#define UV1H_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL +#define UV1H_EVENT_OCCURRED0_XN_AOERR0_SHFT 12 +#define UV1H_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL +#define UV1H_EVENT_OCCURRED0_SI_AOERR0_SHFT 13 +#define UV1H_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL +#define UV1H_EVENT_OCCURRED0_LB_AOERR1_SHFT 14 +#define UV1H_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL +#define UV1H_EVENT_OCCURRED0_GR0_AOERR1_SHFT 15 +#define UV1H_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000000008000UL +#define UV1H_EVENT_OCCURRED0_GR1_AOERR1_SHFT 16 +#define UV1H_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000000010000UL +#define UV1H_EVENT_OCCURRED0_LH_AOERR1_SHFT 17 +#define UV1H_EVENT_OCCURRED0_LH_AOERR1_MASK 0x0000000000020000UL +#define UV1H_EVENT_OCCURRED0_RH_AOERR1_SHFT 18 +#define UV1H_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000040000UL +#define UV1H_EVENT_OCCURRED0_XN_AOERR1_SHFT 19 +#define UV1H_EVENT_OCCURRED0_XN_AOERR1_MASK 0x0000000000080000UL +#define UV1H_EVENT_OCCURRED0_SI_AOERR1_SHFT 20 +#define UV1H_EVENT_OCCURRED0_SI_AOERR1_MASK 0x0000000000100000UL +#define UV1H_EVENT_OCCURRED0_RH_VPI_INT_SHFT 21 +#define UV1H_EVENT_OCCURRED0_RH_VPI_INT_MASK 0x0000000000200000UL +#define UV1H_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 22 +#define UV1H_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 23 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000000800000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 24 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000001000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 25 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000002000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 26 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000004000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 27 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000000008000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 28 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000000010000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 29 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000000020000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 30 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000000040000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 31 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000000080000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 32 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000000100000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 33 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000000200000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 34 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000000400000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 35 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000000800000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 36 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000001000000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 37 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000002000000000UL +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 38 +#define UV1H_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000004000000000UL +#define UV1H_EVENT_OCCURRED0_L1_NMI_INT_SHFT 39 +#define UV1H_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0000008000000000UL +#define UV1H_EVENT_OCCURRED0_STOP_CLOCK_SHFT 40 +#define UV1H_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0000010000000000UL +#define UV1H_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 41 +#define UV1H_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0000020000000000UL +#define UV1H_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 42 +#define UV1H_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0000040000000000UL +#define UV1H_EVENT_OCCURRED0_LTC_INT_SHFT 43 +#define UV1H_EVENT_OCCURRED0_LTC_INT_MASK 0x0000080000000000UL +#define UV1H_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 44 +#define UV1H_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL +#define UV1H_EVENT_OCCURRED0_IPI_INT_SHFT 45 +#define UV1H_EVENT_OCCURRED0_IPI_INT_MASK 0x0000200000000000UL +#define UV1H_EVENT_OCCURRED0_EXTIO_INT0_SHFT 46 +#define UV1H_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0000400000000000UL +#define UV1H_EVENT_OCCURRED0_EXTIO_INT1_SHFT 47 +#define UV1H_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0000800000000000UL +#define UV1H_EVENT_OCCURRED0_EXTIO_INT2_SHFT 48 +#define UV1H_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0001000000000000UL +#define UV1H_EVENT_OCCURRED0_EXTIO_INT3_SHFT 49 +#define UV1H_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0002000000000000UL +#define UV1H_EVENT_OCCURRED0_PROFILE_INT_SHFT 50 +#define UV1H_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0004000000000000UL +#define UV1H_EVENT_OCCURRED0_RTC0_SHFT 51 +#define UV1H_EVENT_OCCURRED0_RTC0_MASK 0x0008000000000000UL +#define UV1H_EVENT_OCCURRED0_RTC1_SHFT 52 +#define UV1H_EVENT_OCCURRED0_RTC1_MASK 0x0010000000000000UL +#define UV1H_EVENT_OCCURRED0_RTC2_SHFT 53 +#define UV1H_EVENT_OCCURRED0_RTC2_MASK 0x0020000000000000UL +#define UV1H_EVENT_OCCURRED0_RTC3_SHFT 54 +#define UV1H_EVENT_OCCURRED0_RTC3_MASK 0x0040000000000000UL +#define UV1H_EVENT_OCCURRED0_BAU_DATA_SHFT 55 +#define UV1H_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL +#define UV1H_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56 +#define UV1H_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL + +#define UV2H_EVENT_OCCURRED0_LB_HCERR_SHFT 0 +#define UV2H_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL +#define UV2H_EVENT_OCCURRED0_QP_HCERR_SHFT 1 +#define UV2H_EVENT_OCCURRED0_QP_HCERR_MASK 0x0000000000000002UL +#define UV2H_EVENT_OCCURRED0_RH_HCERR_SHFT 2 +#define UV2H_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000004UL +#define UV2H_EVENT_OCCURRED0_LH0_HCERR_SHFT 3 +#define UV2H_EVENT_OCCURRED0_LH0_HCERR_MASK 0x0000000000000008UL +#define UV2H_EVENT_OCCURRED0_LH1_HCERR_SHFT 4 +#define UV2H_EVENT_OCCURRED0_LH1_HCERR_MASK 0x0000000000000010UL +#define UV2H_EVENT_OCCURRED0_GR0_HCERR_SHFT 5 +#define UV2H_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000020UL +#define UV2H_EVENT_OCCURRED0_GR1_HCERR_SHFT 6 +#define UV2H_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000040UL +#define UV2H_EVENT_OCCURRED0_NI0_HCERR_SHFT 7 +#define UV2H_EVENT_OCCURRED0_NI0_HCERR_MASK 0x0000000000000080UL +#define UV2H_EVENT_OCCURRED0_NI1_HCERR_SHFT 8 +#define UV2H_EVENT_OCCURRED0_NI1_HCERR_MASK 0x0000000000000100UL +#define UV2H_EVENT_OCCURRED0_LB_AOERR0_SHFT 9 +#define UV2H_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000200UL +#define UV2H_EVENT_OCCURRED0_QP_AOERR0_SHFT 10 +#define UV2H_EVENT_OCCURRED0_QP_AOERR0_MASK 0x0000000000000400UL +#define UV2H_EVENT_OCCURRED0_RH_AOERR0_SHFT 11 +#define UV2H_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL +#define UV2H_EVENT_OCCURRED0_LH0_AOERR0_SHFT 12 +#define UV2H_EVENT_OCCURRED0_LH0_AOERR0_MASK 0x0000000000001000UL +#define UV2H_EVENT_OCCURRED0_LH1_AOERR0_SHFT 13 +#define UV2H_EVENT_OCCURRED0_LH1_AOERR0_MASK 0x0000000000002000UL +#define UV2H_EVENT_OCCURRED0_GR0_AOERR0_SHFT 14 +#define UV2H_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000004000UL +#define UV2H_EVENT_OCCURRED0_GR1_AOERR0_SHFT 15 +#define UV2H_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000008000UL +#define UV2H_EVENT_OCCURRED0_XB_AOERR0_SHFT 16 +#define UV2H_EVENT_OCCURRED0_XB_AOERR0_MASK 0x0000000000010000UL +#define UV2H_EVENT_OCCURRED0_RT_AOERR0_SHFT 17 +#define UV2H_EVENT_OCCURRED0_RT_AOERR0_MASK 0x0000000000020000UL +#define UV2H_EVENT_OCCURRED0_NI0_AOERR0_SHFT 18 +#define UV2H_EVENT_OCCURRED0_NI0_AOERR0_MASK 0x0000000000040000UL +#define UV2H_EVENT_OCCURRED0_NI1_AOERR0_SHFT 19 +#define UV2H_EVENT_OCCURRED0_NI1_AOERR0_MASK 0x0000000000080000UL +#define UV2H_EVENT_OCCURRED0_LB_AOERR1_SHFT 20 +#define UV2H_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000100000UL +#define UV2H_EVENT_OCCURRED0_QP_AOERR1_SHFT 21 +#define UV2H_EVENT_OCCURRED0_QP_AOERR1_MASK 0x0000000000200000UL +#define UV2H_EVENT_OCCURRED0_RH_AOERR1_SHFT 22 +#define UV2H_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000400000UL +#define UV2H_EVENT_OCCURRED0_LH0_AOERR1_SHFT 23 +#define UV2H_EVENT_OCCURRED0_LH0_AOERR1_MASK 0x0000000000800000UL +#define UV2H_EVENT_OCCURRED0_LH1_AOERR1_SHFT 24 +#define UV2H_EVENT_OCCURRED0_LH1_AOERR1_MASK 0x0000000001000000UL +#define UV2H_EVENT_OCCURRED0_GR0_AOERR1_SHFT 25 +#define UV2H_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000002000000UL +#define UV2H_EVENT_OCCURRED0_GR1_AOERR1_SHFT 26 +#define UV2H_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000004000000UL +#define UV2H_EVENT_OCCURRED0_XB_AOERR1_SHFT 27 +#define UV2H_EVENT_OCCURRED0_XB_AOERR1_MASK 0x0000000008000000UL +#define UV2H_EVENT_OCCURRED0_RT_AOERR1_SHFT 28 +#define UV2H_EVENT_OCCURRED0_RT_AOERR1_MASK 0x0000000010000000UL +#define UV2H_EVENT_OCCURRED0_NI0_AOERR1_SHFT 29 +#define UV2H_EVENT_OCCURRED0_NI0_AOERR1_MASK 0x0000000020000000UL +#define UV2H_EVENT_OCCURRED0_NI1_AOERR1_SHFT 30 +#define UV2H_EVENT_OCCURRED0_NI1_AOERR1_MASK 0x0000000040000000UL +#define UV2H_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 31 +#define UV2H_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000080000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 32 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000100000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 33 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000200000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 34 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000400000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 35 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000800000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 36 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000001000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 37 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000002000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 38 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000004000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 39 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000008000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 40 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000010000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 41 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000020000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 42 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000040000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 43 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000080000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 44 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000100000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 45 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000200000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 46 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000400000000000UL +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 47 +#define UV2H_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000800000000000UL +#define UV2H_EVENT_OCCURRED0_L1_NMI_INT_SHFT 48 +#define UV2H_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0001000000000000UL +#define UV2H_EVENT_OCCURRED0_STOP_CLOCK_SHFT 49 +#define UV2H_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0002000000000000UL +#define UV2H_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 50 +#define UV2H_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0004000000000000UL +#define UV2H_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 51 +#define UV2H_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0008000000000000UL +#define UV2H_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 52 +#define UV2H_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0010000000000000UL +#define UV2H_EVENT_OCCURRED0_IPI_INT_SHFT 53 +#define UV2H_EVENT_OCCURRED0_IPI_INT_MASK 0x0020000000000000UL +#define UV2H_EVENT_OCCURRED0_EXTIO_INT0_SHFT 54 +#define UV2H_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0040000000000000UL +#define UV2H_EVENT_OCCURRED0_EXTIO_INT1_SHFT 55 +#define UV2H_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0080000000000000UL +#define UV2H_EVENT_OCCURRED0_EXTIO_INT2_SHFT 56 +#define UV2H_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0100000000000000UL +#define UV2H_EVENT_OCCURRED0_EXTIO_INT3_SHFT 57 +#define UV2H_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0200000000000000UL +#define UV2H_EVENT_OCCURRED0_PROFILE_INT_SHFT 58 +#define UV2H_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0400000000000000UL + union uvh_event_occurred0_u { unsigned long v; - struct uvh_event_occurred0_s { + struct uv1h_event_occurred0_s { unsigned long lb_hcerr : 1; /* RW, W1C */ unsigned long gr0_hcerr : 1; /* RW, W1C */ unsigned long gr1_hcerr : 1; /* RW, W1C */ @@ -250,14 +421,76 @@ union uvh_event_occurred0_u { unsigned long bau_data : 1; /* RW, W1C */ unsigned long power_management_req : 1; /* RW, W1C */ unsigned long rsvd_57_63 : 7; /* */ - } s; + } s1; + struct uv2h_event_occurred0_s { + unsigned long lb_hcerr : 1; /* RW */ + unsigned long qp_hcerr : 1; /* RW */ + unsigned long rh_hcerr : 1; /* RW */ + unsigned long lh0_hcerr : 1; /* RW */ + unsigned long lh1_hcerr : 1; /* RW */ + unsigned long gr0_hcerr : 1; /* RW */ + unsigned long gr1_hcerr : 1; /* RW */ + unsigned long ni0_hcerr : 1; /* RW */ + unsigned long ni1_hcerr : 1; /* RW */ + unsigned long lb_aoerr0 : 1; /* RW */ + unsigned long qp_aoerr0 : 1; /* RW */ + unsigned long rh_aoerr0 : 1; /* RW */ + unsigned long lh0_aoerr0 : 1; /* RW */ + unsigned long lh1_aoerr0 : 1; /* RW */ + unsigned long gr0_aoerr0 : 1; /* RW */ + unsigned long gr1_aoerr0 : 1; /* RW */ + unsigned long xb_aoerr0 : 1; /* RW */ + unsigned long rt_aoerr0 : 1; /* RW */ + unsigned long ni0_aoerr0 : 1; /* RW */ + unsigned long ni1_aoerr0 : 1; /* RW */ + unsigned long lb_aoerr1 : 1; /* RW */ + unsigned long qp_aoerr1 : 1; /* RW */ + unsigned long rh_aoerr1 : 1; /* RW */ + unsigned long lh0_aoerr1 : 1; /* RW */ + unsigned long lh1_aoerr1 : 1; /* RW */ + unsigned long gr0_aoerr1 : 1; /* RW */ + unsigned long gr1_aoerr1 : 1; /* RW */ + unsigned long xb_aoerr1 : 1; /* RW */ + unsigned long rt_aoerr1 : 1; /* RW */ + unsigned long ni0_aoerr1 : 1; /* RW */ + unsigned long ni1_aoerr1 : 1; /* RW */ + unsigned long system_shutdown_int : 1; /* RW */ + unsigned long lb_irq_int_0 : 1; /* RW */ + unsigned long lb_irq_int_1 : 1; /* RW */ + unsigned long lb_irq_int_2 : 1; /* RW */ + unsigned long lb_irq_int_3 : 1; /* RW */ + unsigned long lb_irq_int_4 : 1; /* RW */ + unsigned long lb_irq_int_5 : 1; /* RW */ + unsigned long lb_irq_int_6 : 1; /* RW */ + unsigned long lb_irq_int_7 : 1; /* RW */ + unsigned long lb_irq_int_8 : 1; /* RW */ + unsigned long lb_irq_int_9 : 1; /* RW */ + unsigned long lb_irq_int_10 : 1; /* RW */ + unsigned long lb_irq_int_11 : 1; /* RW */ + unsigned long lb_irq_int_12 : 1; /* RW */ + unsigned long lb_irq_int_13 : 1; /* RW */ + unsigned long lb_irq_int_14 : 1; /* RW */ + unsigned long lb_irq_int_15 : 1; /* RW */ + unsigned long l1_nmi_int : 1; /* RW */ + unsigned long stop_clock : 1; /* RW */ + unsigned long asic_to_l1 : 1; /* RW */ + unsigned long l1_to_asic : 1; /* RW */ + unsigned long la_seq_trigger : 1; /* RW */ + unsigned long ipi_int : 1; /* RW */ + unsigned long extio_int0 : 1; /* RW */ + unsigned long extio_int1 : 1; /* RW */ + unsigned long extio_int2 : 1; /* RW */ + unsigned long extio_int3 : 1; /* RW */ + unsigned long profile_int : 1; /* RW */ + unsigned long rsvd_59_63 : 5; /* */ + } s2; }; /* ========================================================================= */ /* UVH_EVENT_OCCURRED0_ALIAS */ /* ========================================================================= */ #define UVH_EVENT_OCCURRED0_ALIAS 0x0000000000070008UL -#define UVH_EVENT_OCCURRED0_ALIAS_32 0x005f0 +#define UVH_EVENT_OCCURRED0_ALIAS_32 0x5f0 /* ========================================================================= */ /* UVH_GR0_TLB_INT0_CONFIG */ @@ -432,8 +665,16 @@ union uvh_int_cmpb_u { /* ========================================================================= */ #define UVH_INT_CMPC 0x22100UL -#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT 0 -#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK 0x00ffffffffffffffUL +#define UV1H_INT_CMPC_REAL_TIME_CMPC_SHFT 0 +#define UV2H_INT_CMPC_REAL_TIME_CMPC_SHFT 0 +#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT (is_uv1_hub() ? \ + UV1H_INT_CMPC_REAL_TIME_CMPC_SHFT : \ + UV2H_INT_CMPC_REAL_TIME_CMPC_SHFT) +#define UV1H_INT_CMPC_REAL_TIME_CMPC_MASK 0xffffffffffffffUL +#define UV2H_INT_CMPC_REAL_TIME_CMPC_MASK 0xffffffffffffffUL +#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK (is_uv1_hub() ? \ + UV1H_INT_CMPC_REAL_TIME_CMPC_MASK : \ + UV2H_INT_CMPC_REAL_TIME_CMPC_MASK) union uvh_int_cmpc_u { unsigned long v; @@ -448,8 +689,16 @@ union uvh_int_cmpc_u { /* ========================================================================= */ #define UVH_INT_CMPD 0x22180UL -#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT 0 -#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK 0x00ffffffffffffffUL +#define UV1H_INT_CMPD_REAL_TIME_CMPD_SHFT 0 +#define UV2H_INT_CMPD_REAL_TIME_CMPD_SHFT 0 +#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT (is_uv1_hub() ? \ + UV1H_INT_CMPD_REAL_TIME_CMPD_SHFT : \ + UV2H_INT_CMPD_REAL_TIME_CMPD_SHFT) +#define UV1H_INT_CMPD_REAL_TIME_CMPD_MASK 0xffffffffffffffUL +#define UV2H_INT_CMPD_REAL_TIME_CMPD_MASK 0xffffffffffffffUL +#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK (is_uv1_hub() ? \ + UV1H_INT_CMPD_REAL_TIME_CMPD_MASK : \ + UV2H_INT_CMPD_REAL_TIME_CMPD_MASK) union uvh_int_cmpd_u { unsigned long v; @@ -463,7 +712,7 @@ union uvh_int_cmpd_u { /* UVH_IPI_INT */ /* ========================================================================= */ #define UVH_IPI_INT 0x60500UL -#define UVH_IPI_INT_32 0x0348 +#define UVH_IPI_INT_32 0x348 #define UVH_IPI_INT_VECTOR_SHFT 0 #define UVH_IPI_INT_VECTOR_MASK 0x00000000000000ffUL @@ -493,7 +742,7 @@ union uvh_ipi_int_u { /* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST */ /* ========================================================================= */ #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST 0x320050UL -#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x009c0 +#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_32 0x9c0 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_SHFT 4 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST_ADDRESS_MASK 0x000007fffffffff0UL @@ -515,7 +764,7 @@ union uvh_lb_bau_intd_payload_queue_first_u { /* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST */ /* ========================================================================= */ #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST 0x320060UL -#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x009c8 +#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_32 0x9c8 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_SHFT 4 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST_ADDRESS_MASK 0x000007fffffffff0UL @@ -533,7 +782,7 @@ union uvh_lb_bau_intd_payload_queue_last_u { /* UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL */ /* ========================================================================= */ #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL 0x320070UL -#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x009d0 +#define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_32 0x9d0 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_SHFT 4 #define UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL_ADDRESS_MASK 0x000007fffffffff0UL @@ -551,7 +800,7 @@ union uvh_lb_bau_intd_payload_queue_tail_u { /* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE */ /* ========================================================================= */ #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE 0x320080UL -#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0x0a68 +#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_32 0xa68 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_SHFT 0 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_PENDING_0_MASK 0x0000000000000001UL @@ -585,6 +834,7 @@ union uvh_lb_bau_intd_payload_queue_tail_u { #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_6_MASK 0x0000000000004000UL #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_SHFT 15 #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_TIMEOUT_7_MASK 0x0000000000008000UL + union uvh_lb_bau_intd_software_acknowledge_u { unsigned long v; struct uvh_lb_bau_intd_software_acknowledge_s { @@ -612,13 +862,13 @@ union uvh_lb_bau_intd_software_acknowledge_u { /* UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS */ /* ========================================================================= */ #define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS 0x0000000000320088UL -#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0x0a70 +#define UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS_32 0xa70 /* ========================================================================= */ /* UVH_LB_BAU_MISC_CONTROL */ /* ========================================================================= */ #define UVH_LB_BAU_MISC_CONTROL 0x320170UL -#define UVH_LB_BAU_MISC_CONTROL_32 0x00a10 +#define UVH_LB_BAU_MISC_CONTROL_32 0xa10 #define UVH_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT 0 #define UVH_LB_BAU_MISC_CONTROL_REJECTION_DELAY_MASK 0x00000000000000ffUL @@ -628,8 +878,8 @@ union uvh_lb_bau_intd_software_acknowledge_u { #define UVH_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_MASK 0x0000000000000200UL #define UVH_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_SHFT 10 #define UVH_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_MASK 0x0000000000000400UL -#define UVH_LB_BAU_MISC_CONTROL_CSI_AGENT_PRESENCE_VECTOR_SHFT 11 -#define UVH_LB_BAU_MISC_CONTROL_CSI_AGENT_PRESENCE_VECTOR_MASK 0x0000000000003800UL +#define UVH_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_SHFT 11 +#define UVH_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_MASK 0x0000000000003800UL #define UVH_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_SHFT 14 #define UVH_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_MASK 0x0000000000004000UL #define UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT 15 @@ -650,8 +900,86 @@ union uvh_lb_bau_intd_software_acknowledge_u { #define UVH_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_MASK 0x0000000008000000UL #define UVH_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_SHFT 28 #define UVH_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000010000000UL -#define UVH_LB_BAU_MISC_CONTROL_FUN_SHFT 48 -#define UVH_LB_BAU_MISC_CONTROL_FUN_MASK 0xffff000000000000UL + +#define UV1H_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT 0 +#define UV1H_LB_BAU_MISC_CONTROL_REJECTION_DELAY_MASK 0x00000000000000ffUL +#define UV1H_LB_BAU_MISC_CONTROL_APIC_MODE_SHFT 8 +#define UV1H_LB_BAU_MISC_CONTROL_APIC_MODE_MASK 0x0000000000000100UL +#define UV1H_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_SHFT 9 +#define UV1H_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_MASK 0x0000000000000200UL +#define UV1H_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_SHFT 10 +#define UV1H_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_MASK 0x0000000000000400UL +#define UV1H_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_SHFT 11 +#define UV1H_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_MASK 0x0000000000003800UL +#define UV1H_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_SHFT 14 +#define UV1H_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_MASK 0x0000000000004000UL +#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT 15 +#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK 0x0000000000008000UL +#define UV1H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT 16 +#define UV1H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK 0x00000000000f0000UL +#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_SHFT 20 +#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_MASK 0x0000000000100000UL +#define UV1H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_SHFT 21 +#define UV1H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_MASK 0x0000000000200000UL +#define UV1H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_SHFT 22 +#define UV1H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_MASK 0x0000000000400000UL +#define UV1H_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_SHFT 23 +#define UV1H_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_MASK 0x0000000000800000UL +#define UV1H_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_SHFT 24 +#define UV1H_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000007000000UL +#define UV1H_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_SHFT 27 +#define UV1H_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_MASK 0x0000000008000000UL +#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_SHFT 28 +#define UV1H_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000010000000UL +#define UV1H_LB_BAU_MISC_CONTROL_FUN_SHFT 48 +#define UV1H_LB_BAU_MISC_CONTROL_FUN_MASK 0xffff000000000000UL + +#define UV2H_LB_BAU_MISC_CONTROL_REJECTION_DELAY_SHFT 0 +#define UV2H_LB_BAU_MISC_CONTROL_REJECTION_DELAY_MASK 0x00000000000000ffUL +#define UV2H_LB_BAU_MISC_CONTROL_APIC_MODE_SHFT 8 +#define UV2H_LB_BAU_MISC_CONTROL_APIC_MODE_MASK 0x0000000000000100UL +#define UV2H_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_SHFT 9 +#define UV2H_LB_BAU_MISC_CONTROL_FORCE_BROADCAST_MASK 0x0000000000000200UL +#define UV2H_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_SHFT 10 +#define UV2H_LB_BAU_MISC_CONTROL_FORCE_LOCK_NOP_MASK 0x0000000000000400UL +#define UV2H_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_SHFT 11 +#define UV2H_LB_BAU_MISC_CONTROL_QPI_AGENT_PRESENCE_VECTOR_MASK 0x0000000000003800UL +#define UV2H_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_SHFT 14 +#define UV2H_LB_BAU_MISC_CONTROL_DESCRIPTOR_FETCH_MODE_MASK 0x0000000000004000UL +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT 15 +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_MASK 0x0000000000008000UL +#define UV2H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT 16 +#define UV2H_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK 0x00000000000f0000UL +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_SHFT 20 +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_DUAL_MAPPING_MODE_MASK 0x0000000000100000UL +#define UV2H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_SHFT 21 +#define UV2H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_DECODE_ENABLE_MASK 0x0000000000200000UL +#define UV2H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_SHFT 22 +#define UV2H_LB_BAU_MISC_CONTROL_VGA_IO_PORT_16_BIT_DECODE_MASK 0x0000000000400000UL +#define UV2H_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_SHFT 23 +#define UV2H_LB_BAU_MISC_CONTROL_SUPPRESS_DEST_REGISTRATION_MASK 0x0000000000800000UL +#define UV2H_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_SHFT 24 +#define UV2H_LB_BAU_MISC_CONTROL_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000007000000UL +#define UV2H_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_SHFT 27 +#define UV2H_LB_BAU_MISC_CONTROL_USE_INCOMING_PRIORITY_MASK 0x0000000008000000UL +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_SHFT 28 +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_PROGRAMMED_INITIAL_PRIORITY_MASK 0x0000000010000000UL +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_AUTOMATIC_APIC_MODE_SELECTION_SHFT 29 +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_AUTOMATIC_APIC_MODE_SELECTION_MASK 0x0000000020000000UL +#define UV2H_LB_BAU_MISC_CONTROL_APIC_MODE_STATUS_SHFT 30 +#define UV2H_LB_BAU_MISC_CONTROL_APIC_MODE_STATUS_MASK 0x0000000040000000UL +#define UV2H_LB_BAU_MISC_CONTROL_SUPPRESS_INTERRUPTS_TO_SELF_SHFT 31 +#define UV2H_LB_BAU_MISC_CONTROL_SUPPRESS_INTERRUPTS_TO_SELF_MASK 0x0000000080000000UL +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_LOCK_BASED_SYSTEM_FLUSH_SHFT 32 +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_LOCK_BASED_SYSTEM_FLUSH_MASK 0x0000000100000000UL +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT 33 +#define UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_MASK 0x0000000200000000UL +#define UV2H_LB_BAU_MISC_CONTROL_SUPPRESS_INT_PRIO_UDT_TO_SELF_SHFT 34 +#define UV2H_LB_BAU_MISC_CONTROL_SUPPRESS_INT_PRIO_UDT_TO_SELF_MASK 0x0000000400000000UL +#define UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT 35 +#define UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_MASK 0x0000000800000000UL +#define UV2H_LB_BAU_MISC_CONTROL_FUN_SHFT 48 +#define UV2H_LB_BAU_MISC_CONTROL_FUN_MASK 0xffff000000000000UL union uvh_lb_bau_misc_control_u { unsigned long v; @@ -660,7 +988,25 @@ union uvh_lb_bau_misc_control_u { unsigned long apic_mode : 1; /* RW */ unsigned long force_broadcast : 1; /* RW */ unsigned long force_lock_nop : 1; /* RW */ - unsigned long csi_agent_presence_vector : 3; /* RW */ + unsigned long qpi_agent_presence_vector : 3; /* RW */ + unsigned long descriptor_fetch_mode : 1; /* RW */ + unsigned long enable_intd_soft_ack_mode : 1; /* RW */ + unsigned long intd_soft_ack_timeout_period : 4; /* RW */ + unsigned long enable_dual_mapping_mode : 1; /* RW */ + unsigned long vga_io_port_decode_enable : 1; /* RW */ + unsigned long vga_io_port_16_bit_decode : 1; /* RW */ + unsigned long suppress_dest_registration : 1; /* RW */ + unsigned long programmed_initial_priority : 3; /* RW */ + unsigned long use_incoming_priority : 1; /* RW */ + unsigned long enable_programmed_initial_priority : 1; /* RW */ + unsigned long rsvd_29_63 : 35; + } s; + struct uv1h_lb_bau_misc_control_s { + unsigned long rejection_delay : 8; /* RW */ + unsigned long apic_mode : 1; /* RW */ + unsigned long force_broadcast : 1; /* RW */ + unsigned long force_lock_nop : 1; /* RW */ + unsigned long qpi_agent_presence_vector : 3; /* RW */ unsigned long descriptor_fetch_mode : 1; /* RW */ unsigned long enable_intd_soft_ack_mode : 1; /* RW */ unsigned long intd_soft_ack_timeout_period : 4; /* RW */ @@ -673,14 +1019,40 @@ union uvh_lb_bau_misc_control_u { unsigned long enable_programmed_initial_priority : 1; /* RW */ unsigned long rsvd_29_47 : 19; /* */ unsigned long fun : 16; /* RW */ - } s; + } s1; + struct uv2h_lb_bau_misc_control_s { + unsigned long rejection_delay : 8; /* RW */ + unsigned long apic_mode : 1; /* RW */ + unsigned long force_broadcast : 1; /* RW */ + unsigned long force_lock_nop : 1; /* RW */ + unsigned long qpi_agent_presence_vector : 3; /* RW */ + unsigned long descriptor_fetch_mode : 1; /* RW */ + unsigned long enable_intd_soft_ack_mode : 1; /* RW */ + unsigned long intd_soft_ack_timeout_period : 4; /* RW */ + unsigned long enable_dual_mapping_mode : 1; /* RW */ + unsigned long vga_io_port_decode_enable : 1; /* RW */ + unsigned long vga_io_port_16_bit_decode : 1; /* RW */ + unsigned long suppress_dest_registration : 1; /* RW */ + unsigned long programmed_initial_priority : 3; /* RW */ + unsigned long use_incoming_priority : 1; /* RW */ + unsigned long enable_programmed_initial_priority : 1; /* RW */ + unsigned long enable_automatic_apic_mode_selection : 1; /* RW */ + unsigned long apic_mode_status : 1; /* RO */ + unsigned long suppress_interrupts_to_self : 1; /* RW */ + unsigned long enable_lock_based_system_flush : 1; /* RW */ + unsigned long enable_extended_sb_status : 1; /* RW */ + unsigned long suppress_int_prio_udt_to_self : 1; /* RW */ + unsigned long use_legacy_descriptor_formats : 1; /* RW */ + unsigned long rsvd_36_47 : 12; /* */ + unsigned long fun : 16; /* RW */ + } s2; }; /* ========================================================================= */ /* UVH_LB_BAU_SB_ACTIVATION_CONTROL */ /* ========================================================================= */ #define UVH_LB_BAU_SB_ACTIVATION_CONTROL 0x320020UL -#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 0x009a8 +#define UVH_LB_BAU_SB_ACTIVATION_CONTROL_32 0x9a8 #define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_SHFT 0 #define UVH_LB_BAU_SB_ACTIVATION_CONTROL_INDEX_MASK 0x000000000000003fUL @@ -703,7 +1075,7 @@ union uvh_lb_bau_sb_activation_control_u { /* UVH_LB_BAU_SB_ACTIVATION_STATUS_0 */ /* ========================================================================= */ #define UVH_LB_BAU_SB_ACTIVATION_STATUS_0 0x320030UL -#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x009b0 +#define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_32 0x9b0 #define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_SHFT 0 #define UVH_LB_BAU_SB_ACTIVATION_STATUS_0_STATUS_MASK 0xffffffffffffffffUL @@ -719,7 +1091,7 @@ union uvh_lb_bau_sb_activation_status_0_u { /* UVH_LB_BAU_SB_ACTIVATION_STATUS_1 */ /* ========================================================================= */ #define UVH_LB_BAU_SB_ACTIVATION_STATUS_1 0x320040UL -#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x009b8 +#define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_32 0x9b8 #define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_SHFT 0 #define UVH_LB_BAU_SB_ACTIVATION_STATUS_1_STATUS_MASK 0xffffffffffffffffUL @@ -735,7 +1107,7 @@ union uvh_lb_bau_sb_activation_status_1_u { /* UVH_LB_BAU_SB_DESCRIPTOR_BASE */ /* ========================================================================= */ #define UVH_LB_BAU_SB_DESCRIPTOR_BASE 0x320010UL -#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 0x009a0 +#define UVH_LB_BAU_SB_DESCRIPTOR_BASE_32 0x9a0 #define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_SHFT 12 #define UVH_LB_BAU_SB_DESCRIPTOR_BASE_PAGE_ADDRESS_MASK 0x000007fffffff000UL @@ -753,23 +1125,6 @@ union uvh_lb_bau_sb_descriptor_base_u { } s; }; -/* ========================================================================= */ -/* UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK */ -/* ========================================================================= */ -#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK 0x320130UL -#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_32 0x009f0 - -#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_SHFT 0 -#define UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_MASK 0x00000000ffffffffUL - -union uvh_lb_target_physical_apic_id_mask_u { - unsigned long v; - struct uvh_lb_target_physical_apic_id_mask_s { - unsigned long bit_enables : 32; /* RW */ - unsigned long rsvd_32_63 : 32; /* */ - } s; -}; - /* ========================================================================= */ /* UVH_NODE_ID */ /* ========================================================================= */ @@ -785,14 +1140,48 @@ union uvh_lb_target_physical_apic_id_mask_u { #define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL #define UVH_NODE_ID_NODE_ID_SHFT 32 #define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL -#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48 -#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL -#define UVH_NODE_ID_NI_PORT_SHFT 56 -#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL + +#define UV1H_NODE_ID_FORCE1_SHFT 0 +#define UV1H_NODE_ID_FORCE1_MASK 0x0000000000000001UL +#define UV1H_NODE_ID_MANUFACTURER_SHFT 1 +#define UV1H_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL +#define UV1H_NODE_ID_PART_NUMBER_SHFT 12 +#define UV1H_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL +#define UV1H_NODE_ID_REVISION_SHFT 28 +#define UV1H_NODE_ID_REVISION_MASK 0x00000000f0000000UL +#define UV1H_NODE_ID_NODE_ID_SHFT 32 +#define UV1H_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL +#define UV1H_NODE_ID_NODES_PER_BIT_SHFT 48 +#define UV1H_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL +#define UV1H_NODE_ID_NI_PORT_SHFT 56 +#define UV1H_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL + +#define UV2H_NODE_ID_FORCE1_SHFT 0 +#define UV2H_NODE_ID_FORCE1_MASK 0x0000000000000001UL +#define UV2H_NODE_ID_MANUFACTURER_SHFT 1 +#define UV2H_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL +#define UV2H_NODE_ID_PART_NUMBER_SHFT 12 +#define UV2H_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL +#define UV2H_NODE_ID_REVISION_SHFT 28 +#define UV2H_NODE_ID_REVISION_MASK 0x00000000f0000000UL +#define UV2H_NODE_ID_NODE_ID_SHFT 32 +#define UV2H_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL +#define UV2H_NODE_ID_NODES_PER_BIT_SHFT 50 +#define UV2H_NODE_ID_NODES_PER_BIT_MASK 0x01fc000000000000UL +#define UV2H_NODE_ID_NI_PORT_SHFT 57 +#define UV2H_NODE_ID_NI_PORT_MASK 0x3e00000000000000UL union uvh_node_id_u { unsigned long v; struct uvh_node_id_s { + unsigned long force1 : 1; /* RO */ + unsigned long manufacturer : 11; /* RO */ + unsigned long part_number : 16; /* RO */ + unsigned long revision : 4; /* RO */ + unsigned long node_id : 15; /* RW */ + unsigned long rsvd_47_63 : 17; + } s; + struct uv1h_node_id_s { unsigned long force1 : 1; /* RO */ unsigned long manufacturer : 11; /* RO */ unsigned long part_number : 16; /* RO */ @@ -803,7 +1192,18 @@ union uvh_node_id_u { unsigned long rsvd_55 : 1; /* */ unsigned long ni_port : 4; /* RO */ unsigned long rsvd_60_63 : 4; /* */ - } s; + } s1; + struct uv2h_node_id_s { + unsigned long force1 : 1; /* RO */ + unsigned long manufacturer : 11; /* RO */ + unsigned long part_number : 16; /* RO */ + unsigned long revision : 4; /* RO */ + unsigned long node_id : 15; /* RW */ + unsigned long rsvd_47_49 : 3; /* */ + unsigned long nodes_per_bit : 7; /* RO */ + unsigned long ni_port : 5; /* RO */ + unsigned long rsvd_62_63 : 2; /* */ + } s2; }; /* ========================================================================= */ @@ -954,18 +1354,38 @@ union uvh_rh_gam_alias210_redirect_config_2_mmr_u { #define UVH_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL #define UVH_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6 #define UVH_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL -#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT 12 -#define UVH_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL + +#define UV1H_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0 +#define UV1H_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL +#define UV1H_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6 +#define UV1H_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL +#define UV1H_RH_GAM_CONFIG_MMR_MMIOL_CFG_SHFT 12 +#define UV1H_RH_GAM_CONFIG_MMR_MMIOL_CFG_MASK 0x0000000000001000UL + +#define UV2H_RH_GAM_CONFIG_MMR_M_SKT_SHFT 0 +#define UV2H_RH_GAM_CONFIG_MMR_M_SKT_MASK 0x000000000000003fUL +#define UV2H_RH_GAM_CONFIG_MMR_N_SKT_SHFT 6 +#define UV2H_RH_GAM_CONFIG_MMR_N_SKT_MASK 0x00000000000003c0UL union uvh_rh_gam_config_mmr_u { unsigned long v; struct uvh_rh_gam_config_mmr_s { + unsigned long m_skt : 6; /* RW */ + unsigned long n_skt : 4; /* RW */ + unsigned long rsvd_10_63 : 54; + } s; + struct uv1h_rh_gam_config_mmr_s { unsigned long m_skt : 6; /* RW */ unsigned long n_skt : 4; /* RW */ unsigned long rsvd_10_11: 2; /* */ unsigned long mmiol_cfg : 1; /* RW */ unsigned long rsvd_13_63: 51; /* */ - } s; + } s1; + struct uv2h_rh_gam_config_mmr_s { + unsigned long m_skt : 6; /* RW */ + unsigned long n_skt : 4; /* RW */ + unsigned long rsvd_10_63: 54; /* */ + } s2; }; /* ========================================================================= */ @@ -975,16 +1395,32 @@ union uvh_rh_gam_config_mmr_u { #define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28 #define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48 -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0001000000000000UL -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52 -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 -#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL + +#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28 +#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL +#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48 +#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0001000000000000UL +#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52 +#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL +#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 +#define UV1H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL + +#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28 +#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL +#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52 +#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL +#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 +#define UV2H_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL union uvh_rh_gam_gru_overlay_config_mmr_u { unsigned long v; struct uvh_rh_gam_gru_overlay_config_mmr_s { + unsigned long rsvd_0_27: 28; /* */ + unsigned long base : 18; /* RW */ + unsigned long rsvd_46_62 : 17; + unsigned long enable : 1; /* RW */ + } s; + struct uv1h_rh_gam_gru_overlay_config_mmr_s { unsigned long rsvd_0_27: 28; /* */ unsigned long base : 18; /* RW */ unsigned long rsvd_46_47: 2; /* */ @@ -993,7 +1429,15 @@ union uvh_rh_gam_gru_overlay_config_mmr_u { unsigned long n_gru : 4; /* RW */ unsigned long rsvd_56_62: 7; /* */ unsigned long enable : 1; /* RW */ - } s; + } s1; + struct uv2h_rh_gam_gru_overlay_config_mmr_s { + unsigned long rsvd_0_27: 28; /* */ + unsigned long base : 18; /* RW */ + unsigned long rsvd_46_51: 6; /* */ + unsigned long n_gru : 4; /* RW */ + unsigned long rsvd_56_62: 7; /* */ + unsigned long enable : 1; /* RW */ + } s2; }; /* ========================================================================= */ @@ -1001,25 +1445,42 @@ union uvh_rh_gam_gru_overlay_config_mmr_u { /* ========================================================================= */ #define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR 0x1600030UL -#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT 30 -#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003fffc0000000UL -#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_SHFT 46 -#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_MASK 0x000fc00000000000UL -#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_SHFT 52 -#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_MASK 0x00f0000000000000UL -#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 -#define UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL +#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT 30 +#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003fffc0000000UL +#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_SHFT 46 +#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_MASK 0x000fc00000000000UL +#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_SHFT 52 +#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_MASK 0x00f0000000000000UL +#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 +#define UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL + +#define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT 27 +#define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff8000000UL +#define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_SHFT 46 +#define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_M_IO_MASK 0x000fc00000000000UL +#define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_SHFT 52 +#define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_N_IO_MASK 0x00f0000000000000UL +#define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 +#define UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL union uvh_rh_gam_mmioh_overlay_config_mmr_u { unsigned long v; - struct uvh_rh_gam_mmioh_overlay_config_mmr_s { + struct uv1h_rh_gam_mmioh_overlay_config_mmr_s { unsigned long rsvd_0_29: 30; /* */ unsigned long base : 16; /* RW */ unsigned long m_io : 6; /* RW */ unsigned long n_io : 4; /* RW */ unsigned long rsvd_56_62: 7; /* */ unsigned long enable : 1; /* RW */ - } s; + } s1; + struct uv2h_rh_gam_mmioh_overlay_config_mmr_s { + unsigned long rsvd_0_26: 27; /* */ + unsigned long base : 19; /* RW */ + unsigned long m_io : 6; /* RW */ + unsigned long n_io : 4; /* RW */ + unsigned long rsvd_56_62: 7; /* */ + unsigned long enable : 1; /* RW */ + } s2; }; /* ========================================================================= */ @@ -1029,20 +1490,40 @@ union uvh_rh_gam_mmioh_overlay_config_mmr_u { #define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26 #define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46 -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 -#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL + +#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26 +#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL +#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46 +#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL +#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 +#define UV1H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL + +#define UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26 +#define UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL +#define UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63 +#define UV2H_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL union uvh_rh_gam_mmr_overlay_config_mmr_u { unsigned long v; struct uvh_rh_gam_mmr_overlay_config_mmr_s { + unsigned long rsvd_0_25: 26; /* */ + unsigned long base : 20; /* RW */ + unsigned long rsvd_46_62 : 17; + unsigned long enable : 1; /* RW */ + } s; + struct uv1h_rh_gam_mmr_overlay_config_mmr_s { unsigned long rsvd_0_25: 26; /* */ unsigned long base : 20; /* RW */ unsigned long dual_hub : 1; /* RW */ unsigned long rsvd_47_62: 16; /* */ unsigned long enable : 1; /* RW */ - } s; + } s1; + struct uv2h_rh_gam_mmr_overlay_config_mmr_s { + unsigned long rsvd_0_25: 26; /* */ + unsigned long base : 20; /* RW */ + unsigned long rsvd_46_62: 17; /* */ + unsigned long enable : 1; /* RW */ + } s2; }; /* ========================================================================= */ @@ -1103,10 +1584,11 @@ union uvh_rtc1_int_config_u { /* UVH_SCRATCH5 */ /* ========================================================================= */ #define UVH_SCRATCH5 0x2d0200UL -#define UVH_SCRATCH5_32 0x00778 +#define UVH_SCRATCH5_32 0x778 #define UVH_SCRATCH5_SCRATCH5_SHFT 0 #define UVH_SCRATCH5_SCRATCH5_MASK 0xffffffffffffffffUL + union uvh_scratch5_u { unsigned long v; struct uvh_scratch5_s { @@ -1114,4 +1596,154 @@ union uvh_scratch5_u { } s; }; +/* ========================================================================= */ +/* UV2H_EVENT_OCCURRED2 */ +/* ========================================================================= */ +#define UV2H_EVENT_OCCURRED2 0x70100UL +#define UV2H_EVENT_OCCURRED2_32 0xb68 + +#define UV2H_EVENT_OCCURRED2_RTC_0_SHFT 0 +#define UV2H_EVENT_OCCURRED2_RTC_0_MASK 0x0000000000000001UL +#define UV2H_EVENT_OCCURRED2_RTC_1_SHFT 1 +#define UV2H_EVENT_OCCURRED2_RTC_1_MASK 0x0000000000000002UL +#define UV2H_EVENT_OCCURRED2_RTC_2_SHFT 2 +#define UV2H_EVENT_OCCURRED2_RTC_2_MASK 0x0000000000000004UL +#define UV2H_EVENT_OCCURRED2_RTC_3_SHFT 3 +#define UV2H_EVENT_OCCURRED2_RTC_3_MASK 0x0000000000000008UL +#define UV2H_EVENT_OCCURRED2_RTC_4_SHFT 4 +#define UV2H_EVENT_OCCURRED2_RTC_4_MASK 0x0000000000000010UL +#define UV2H_EVENT_OCCURRED2_RTC_5_SHFT 5 +#define UV2H_EVENT_OCCURRED2_RTC_5_MASK 0x0000000000000020UL +#define UV2H_EVENT_OCCURRED2_RTC_6_SHFT 6 +#define UV2H_EVENT_OCCURRED2_RTC_6_MASK 0x0000000000000040UL +#define UV2H_EVENT_OCCURRED2_RTC_7_SHFT 7 +#define UV2H_EVENT_OCCURRED2_RTC_7_MASK 0x0000000000000080UL +#define UV2H_EVENT_OCCURRED2_RTC_8_SHFT 8 +#define UV2H_EVENT_OCCURRED2_RTC_8_MASK 0x0000000000000100UL +#define UV2H_EVENT_OCCURRED2_RTC_9_SHFT 9 +#define UV2H_EVENT_OCCURRED2_RTC_9_MASK 0x0000000000000200UL +#define UV2H_EVENT_OCCURRED2_RTC_10_SHFT 10 +#define UV2H_EVENT_OCCURRED2_RTC_10_MASK 0x0000000000000400UL +#define UV2H_EVENT_OCCURRED2_RTC_11_SHFT 11 +#define UV2H_EVENT_OCCURRED2_RTC_11_MASK 0x0000000000000800UL +#define UV2H_EVENT_OCCURRED2_RTC_12_SHFT 12 +#define UV2H_EVENT_OCCURRED2_RTC_12_MASK 0x0000000000001000UL +#define UV2H_EVENT_OCCURRED2_RTC_13_SHFT 13 +#define UV2H_EVENT_OCCURRED2_RTC_13_MASK 0x0000000000002000UL +#define UV2H_EVENT_OCCURRED2_RTC_14_SHFT 14 +#define UV2H_EVENT_OCCURRED2_RTC_14_MASK 0x0000000000004000UL +#define UV2H_EVENT_OCCURRED2_RTC_15_SHFT 15 +#define UV2H_EVENT_OCCURRED2_RTC_15_MASK 0x0000000000008000UL +#define UV2H_EVENT_OCCURRED2_RTC_16_SHFT 16 +#define UV2H_EVENT_OCCURRED2_RTC_16_MASK 0x0000000000010000UL +#define UV2H_EVENT_OCCURRED2_RTC_17_SHFT 17 +#define UV2H_EVENT_OCCURRED2_RTC_17_MASK 0x0000000000020000UL +#define UV2H_EVENT_OCCURRED2_RTC_18_SHFT 18 +#define UV2H_EVENT_OCCURRED2_RTC_18_MASK 0x0000000000040000UL +#define UV2H_EVENT_OCCURRED2_RTC_19_SHFT 19 +#define UV2H_EVENT_OCCURRED2_RTC_19_MASK 0x0000000000080000UL +#define UV2H_EVENT_OCCURRED2_RTC_20_SHFT 20 +#define UV2H_EVENT_OCCURRED2_RTC_20_MASK 0x0000000000100000UL +#define UV2H_EVENT_OCCURRED2_RTC_21_SHFT 21 +#define UV2H_EVENT_OCCURRED2_RTC_21_MASK 0x0000000000200000UL +#define UV2H_EVENT_OCCURRED2_RTC_22_SHFT 22 +#define UV2H_EVENT_OCCURRED2_RTC_22_MASK 0x0000000000400000UL +#define UV2H_EVENT_OCCURRED2_RTC_23_SHFT 23 +#define UV2H_EVENT_OCCURRED2_RTC_23_MASK 0x0000000000800000UL +#define UV2H_EVENT_OCCURRED2_RTC_24_SHFT 24 +#define UV2H_EVENT_OCCURRED2_RTC_24_MASK 0x0000000001000000UL +#define UV2H_EVENT_OCCURRED2_RTC_25_SHFT 25 +#define UV2H_EVENT_OCCURRED2_RTC_25_MASK 0x0000000002000000UL +#define UV2H_EVENT_OCCURRED2_RTC_26_SHFT 26 +#define UV2H_EVENT_OCCURRED2_RTC_26_MASK 0x0000000004000000UL +#define UV2H_EVENT_OCCURRED2_RTC_27_SHFT 27 +#define UV2H_EVENT_OCCURRED2_RTC_27_MASK 0x0000000008000000UL +#define UV2H_EVENT_OCCURRED2_RTC_28_SHFT 28 +#define UV2H_EVENT_OCCURRED2_RTC_28_MASK 0x0000000010000000UL +#define UV2H_EVENT_OCCURRED2_RTC_29_SHFT 29 +#define UV2H_EVENT_OCCURRED2_RTC_29_MASK 0x0000000020000000UL +#define UV2H_EVENT_OCCURRED2_RTC_30_SHFT 30 +#define UV2H_EVENT_OCCURRED2_RTC_30_MASK 0x0000000040000000UL +#define UV2H_EVENT_OCCURRED2_RTC_31_SHFT 31 +#define UV2H_EVENT_OCCURRED2_RTC_31_MASK 0x0000000080000000UL + +union uv2h_event_occurred2_u { + unsigned long v; + struct uv2h_event_occurred2_s { + unsigned long rtc_0 : 1; /* RW */ + unsigned long rtc_1 : 1; /* RW */ + unsigned long rtc_2 : 1; /* RW */ + unsigned long rtc_3 : 1; /* RW */ + unsigned long rtc_4 : 1; /* RW */ + unsigned long rtc_5 : 1; /* RW */ + unsigned long rtc_6 : 1; /* RW */ + unsigned long rtc_7 : 1; /* RW */ + unsigned long rtc_8 : 1; /* RW */ + unsigned long rtc_9 : 1; /* RW */ + unsigned long rtc_10 : 1; /* RW */ + unsigned long rtc_11 : 1; /* RW */ + unsigned long rtc_12 : 1; /* RW */ + unsigned long rtc_13 : 1; /* RW */ + unsigned long rtc_14 : 1; /* RW */ + unsigned long rtc_15 : 1; /* RW */ + unsigned long rtc_16 : 1; /* RW */ + unsigned long rtc_17 : 1; /* RW */ + unsigned long rtc_18 : 1; /* RW */ + unsigned long rtc_19 : 1; /* RW */ + unsigned long rtc_20 : 1; /* RW */ + unsigned long rtc_21 : 1; /* RW */ + unsigned long rtc_22 : 1; /* RW */ + unsigned long rtc_23 : 1; /* RW */ + unsigned long rtc_24 : 1; /* RW */ + unsigned long rtc_25 : 1; /* RW */ + unsigned long rtc_26 : 1; /* RW */ + unsigned long rtc_27 : 1; /* RW */ + unsigned long rtc_28 : 1; /* RW */ + unsigned long rtc_29 : 1; /* RW */ + unsigned long rtc_30 : 1; /* RW */ + unsigned long rtc_31 : 1; /* RW */ + unsigned long rsvd_32_63: 32; /* */ + } s1; +}; + +/* ========================================================================= */ +/* UV2H_EVENT_OCCURRED2_ALIAS */ +/* ========================================================================= */ +#define UV2H_EVENT_OCCURRED2_ALIAS 0x70108UL +#define UV2H_EVENT_OCCURRED2_ALIAS_32 0xb70 + +/* ========================================================================= */ +/* UV2H_LB_BAU_SB_ACTIVATION_STATUS_2 */ +/* ========================================================================= */ +#define UV2H_LB_BAU_SB_ACTIVATION_STATUS_2 0x320130UL +#define UV2H_LB_BAU_SB_ACTIVATION_STATUS_2_32 0x9f0 + +#define UV2H_LB_BAU_SB_ACTIVATION_STATUS_2_AUX_ERROR_SHFT 0 +#define UV2H_LB_BAU_SB_ACTIVATION_STATUS_2_AUX_ERROR_MASK 0xffffffffffffffffUL + +union uv2h_lb_bau_sb_activation_status_2_u { + unsigned long v; + struct uv2h_lb_bau_sb_activation_status_2_s { + unsigned long aux_error : 64; /* RW */ + } s1; +}; + +/* ========================================================================= */ +/* UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK */ +/* ========================================================================= */ +#define UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK 0x320130UL +#define UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK_32 0x9f0 + +#define UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_SHFT 0 +#define UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK_BIT_ENABLES_MASK 0x00000000ffffffffUL + +union uv1h_lb_target_physical_apic_id_mask_u { + unsigned long v; + struct uv1h_lb_target_physical_apic_id_mask_s { + unsigned long bit_enables : 32; /* RW */ + unsigned long rsvd_32_63 : 32; /* */ + } s1; +}; + + #endif /* __ASM_UV_MMRS_X86_H__ */ diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c index f450b683dfcf..b511a011b7d0 100644 --- a/arch/x86/kernel/apic/x2apic_uv_x.c +++ b/arch/x86/kernel/apic/x2apic_uv_x.c @@ -91,6 +91,10 @@ static int __init early_get_pnodeid(void) m_n_config.v = uv_early_read_mmr(UVH_RH_GAM_CONFIG_MMR); uv_min_hub_revision_id = node_id.s.revision; + if (node_id.s.part_number == UV2_HUB_PART_NUMBER) + uv_min_hub_revision_id += UV2_HUB_REVISION_BASE - 1; + + uv_hub_info->hub_revision = uv_min_hub_revision_id; pnode = (node_id.s.node_id >> 1) & ((1 << m_n_config.s.n_skt) - 1); return pnode; } @@ -112,17 +116,25 @@ static void __init early_get_apic_pnode_shift(void) */ static void __init uv_set_apicid_hibit(void) { - union uvh_lb_target_physical_apic_id_mask_u apicid_mask; + union uv1h_lb_target_physical_apic_id_mask_u apicid_mask; - apicid_mask.v = uv_early_read_mmr(UVH_LB_TARGET_PHYSICAL_APIC_ID_MASK); - uv_apicid_hibits = apicid_mask.s.bit_enables & UV_APICID_HIBIT_MASK; + if (is_uv1_hub()) { + apicid_mask.v = + uv_early_read_mmr(UV1H_LB_TARGET_PHYSICAL_APIC_ID_MASK); + uv_apicid_hibits = + apicid_mask.s1.bit_enables & UV_APICID_HIBIT_MASK; + } } static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { - int pnodeid; + int pnodeid, is_uv1, is_uv2; - if (!strcmp(oem_id, "SGI")) { + is_uv1 = !strcmp(oem_id, "SGI"); + is_uv2 = !strcmp(oem_id, "SGI2"); + if (is_uv1 || is_uv2) { + uv_hub_info->hub_revision = + is_uv1 ? UV1_HUB_REVISION_BASE : UV2_HUB_REVISION_BASE; pnodeid = early_get_pnodeid(); early_get_apic_pnode_shift(); x86_platform.is_untracked_pat_range = uv_is_untracked_pat_range; @@ -484,12 +496,19 @@ static __init void map_mmr_high(int max_pnode) static __init void map_mmioh_high(int max_pnode) { union uvh_rh_gam_mmioh_overlay_config_mmr_u mmioh; - int shift = UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT; + int shift; mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR); - if (mmioh.s.enable) - map_high("MMIOH", mmioh.s.base, shift, mmioh.s.m_io, + if (is_uv1_hub() && mmioh.s1.enable) { + shift = UV1H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT; + map_high("MMIOH", mmioh.s1.base, shift, mmioh.s1.m_io, + max_pnode, map_uc); + } + if (is_uv2_hub() && mmioh.s2.enable) { + shift = UV2H_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR_BASE_SHFT; + map_high("MMIOH", mmioh.s2.base, shift, mmioh.s2.m_io, max_pnode, map_uc); + } } static __init void map_low_mmrs(void) @@ -736,13 +755,14 @@ void __init uv_system_init(void) unsigned long mmr_base, present, paddr; unsigned short pnode_mask, pnode_io_mask; + printk(KERN_INFO "UV: Found %s hub\n", is_uv1_hub() ? "UV1" : "UV2"); map_low_mmrs(); m_n_config.v = uv_read_local_mmr(UVH_RH_GAM_CONFIG_MMR ); m_val = m_n_config.s.m_skt; n_val = m_n_config.s.n_skt; mmioh.v = uv_read_local_mmr(UVH_RH_GAM_MMIOH_OVERLAY_CONFIG_MMR); - n_io = mmioh.s.n_io; + n_io = is_uv1_hub() ? mmioh.s1.n_io : mmioh.s2.n_io; mmr_base = uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) & ~UV_MMR_ENABLE; @@ -811,6 +831,8 @@ void __init uv_system_init(void) */ uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask; uv_cpu_hub_info(cpu)->apic_pnode_shift = uvh_apicid.s.pnode_shift; + uv_cpu_hub_info(cpu)->hub_revision = uv_hub_info->hub_revision; + pnode = uv_apicid_to_pnode(apicid); blade = boot_pnode_to_blade(pnode); lcpu = uv_blade_info[blade].nr_possible_cpus; diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index c58e0ea39ef5..a9856c09c425 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -397,16 +397,13 @@ end_uvhub_quiesce(struct bau_control *hmaster) * Wait for completion of a broadcast software ack message * return COMPLETE, RETRY(PLUGGED or TIMEOUT) or GIVEUP */ -static int uv_wait_completion(struct bau_desc *bau_desc, +static int uv1_wait_completion(struct bau_desc *bau_desc, unsigned long mmr_offset, int right_shift, int this_cpu, struct bau_control *bcp, struct bau_control *smaster, long try) { unsigned long descriptor_status; cycles_t ttime; struct ptc_stats *stat = bcp->statp; - struct bau_control *hmaster; - - hmaster = bcp->uvhub_master; /* spin on the status MMR, waiting for it to go idle */ while ((descriptor_status = (((unsigned long) @@ -414,16 +411,76 @@ static int uv_wait_completion(struct bau_desc *bau_desc, right_shift) & UV_ACT_STATUS_MASK)) != DESC_STATUS_IDLE) { /* - * Our software ack messages may be blocked because there are - * no swack resources available. As long as none of them - * has timed out hardware will NACK our message and its - * state will stay IDLE. + * Our software ack messages may be blocked because + * there are no swack resources available. As long + * as none of them has timed out hardware will NACK + * our message and its state will stay IDLE. */ if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) { stat->s_stimeout++; return FLUSH_GIVEUP; } else if (descriptor_status == - DESC_STATUS_DESTINATION_TIMEOUT) { + DESC_STATUS_DESTINATION_TIMEOUT) { + stat->s_dtimeout++; + ttime = get_cycles(); + + /* + * Our retries may be blocked by all destination + * swack resources being consumed, and a timeout + * pending. In that case hardware returns the + * ERROR that looks like a destination timeout. + */ + if (cycles_2_us(ttime - bcp->send_message) < + timeout_us) { + bcp->conseccompletes = 0; + return FLUSH_RETRY_PLUGGED; + } + + bcp->conseccompletes = 0; + return FLUSH_RETRY_TIMEOUT; + } else { + /* + * descriptor_status is still BUSY + */ + cpu_relax(); + } + } + bcp->conseccompletes++; + return FLUSH_COMPLETE; +} + +static int uv2_wait_completion(struct bau_desc *bau_desc, + unsigned long mmr_offset, int right_shift, int this_cpu, + struct bau_control *bcp, struct bau_control *smaster, long try) +{ + unsigned long descriptor_status; + unsigned long descriptor_status2; + int cpu; + cycles_t ttime; + struct ptc_stats *stat = bcp->statp; + + /* UV2 has an extra bit of status */ + cpu = bcp->uvhub_cpu; + /* spin on the status MMR, waiting for it to go idle */ + descriptor_status = (((unsigned long)(uv_read_local_mmr + (mmr_offset)) >> right_shift) & UV_ACT_STATUS_MASK); + descriptor_status2 = (((unsigned long)uv_read_local_mmr + (UV2H_LB_BAU_SB_ACTIVATION_STATUS_2) >> cpu) & 0x1UL); + descriptor_status = (descriptor_status << 1) | + descriptor_status2; + while (descriptor_status != UV2H_DESC_IDLE) { + /* + * Our software ack messages may be blocked because + * there are no swack resources available. As long + * as none of them has timed out hardware will NACK + * our message and its state will stay IDLE. + */ + if ((descriptor_status == UV2H_DESC_SOURCE_TIMEOUT) || + (descriptor_status == UV2H_DESC_DEST_STRONG_NACK) || + (descriptor_status == UV2H_DESC_DEST_PUT_ERR)) { + stat->s_stimeout++; + return FLUSH_GIVEUP; + } else if (descriptor_status == UV2H_DESC_DEST_TIMEOUT) { stat->s_dtimeout++; ttime = get_cycles(); @@ -447,11 +504,31 @@ static int uv_wait_completion(struct bau_desc *bau_desc, */ cpu_relax(); } + descriptor_status = (((unsigned long)(uv_read_local_mmr + (mmr_offset)) >> right_shift) & + UV_ACT_STATUS_MASK); + descriptor_status2 = (((unsigned long)uv_read_local_mmr + (UV2H_LB_BAU_SB_ACTIVATION_STATUS_2) >> cpu) & + 0x1UL); + descriptor_status = (descriptor_status << 1) | + descriptor_status2; } bcp->conseccompletes++; return FLUSH_COMPLETE; } +static int uv_wait_completion(struct bau_desc *bau_desc, + unsigned long mmr_offset, int right_shift, int this_cpu, + struct bau_control *bcp, struct bau_control *smaster, long try) +{ + if (is_uv1_hub()) + return uv1_wait_completion(bau_desc, mmr_offset, right_shift, + this_cpu, bcp, smaster, try); + else + return uv2_wait_completion(bau_desc, mmr_offset, right_shift, + this_cpu, bcp, smaster, try); +} + static inline cycles_t sec_2_cycles(unsigned long sec) { @@ -585,7 +662,8 @@ int uv_flush_send_and_wait(struct bau_desc *bau_desc, struct bau_control *smaster = bcp->socket_master; struct bau_control *hmaster = bcp->uvhub_master; - if (!atomic_inc_unless_ge(&hmaster->uvhub_lock, + if (is_uv1_hub() && + !atomic_inc_unless_ge(&hmaster->uvhub_lock, &hmaster->active_descriptor_count, hmaster->max_bau_concurrent)) { stat->s_throttles++; @@ -899,12 +977,17 @@ static void __init uv_enable_timeouts(void) uv_write_global_mmr64 (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); /* + * UV1: * Subsequent reversals of the timebase bit (3) cause an * immediate timeout of one or all INTD resources as * indicated in bits 2:0 (7 causes all of them to timeout). */ mmr_image |= ((unsigned long)1 << UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT); + if (is_uv2_hub()) { + mmr_image |= ((unsigned long)1 << UV2_LEG_SHFT); + mmr_image |= ((unsigned long)1 << UV2_EXT_SHFT); + } uv_write_global_mmr64 (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); } @@ -1486,14 +1569,27 @@ calculate_destination_timeout(void) int ret; unsigned long ts_ns; - mult1 = UV_INTD_SOFT_ACK_TIMEOUT_PERIOD & BAU_MISC_CONTROL_MULT_MASK; - mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL); - index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK; - mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT); - mult2 = (mmr_image >> BAU_TRANS_SHIFT) & BAU_TRANS_MASK; - base = timeout_base_ns[index]; - ts_ns = base * mult1 * mult2; - ret = ts_ns / 1000; + if (is_uv1_hub()) { + mult1 = UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD & + BAU_MISC_CONTROL_MULT_MASK; + mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL); + index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK; + mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT); + mult2 = (mmr_image >> BAU_TRANS_SHIFT) & BAU_TRANS_MASK; + base = timeout_base_ns[index]; + ts_ns = base * mult1 * mult2; + ret = ts_ns / 1000; + } else { + /* 4 bits 0/1 for 10/80us, 3 bits of multiplier */ + mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL); + mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT; + if (mmr_image & ((unsigned long)1 << UV2_ACK_UNITS_SHFT)) + mult1 = 80; + else + mult1 = 10; + base = mmr_image & UV2_ACK_MASK; + ret = mult1 * base; + } return ret; } diff --git a/arch/x86/platform/uv/uv_time.c b/arch/x86/platform/uv/uv_time.c index 0eb90184515f..9f29a01ee1b3 100644 --- a/arch/x86/platform/uv/uv_time.c +++ b/arch/x86/platform/uv/uv_time.c @@ -99,8 +99,12 @@ static void uv_rtc_send_IPI(int cpu) /* Check for an RTC interrupt pending */ static int uv_intr_pending(int pnode) { - return uv_read_global_mmr64(pnode, UVH_EVENT_OCCURRED0) & - UVH_EVENT_OCCURRED0_RTC1_MASK; + if (is_uv1_hub()) + return uv_read_global_mmr64(pnode, UVH_EVENT_OCCURRED0) & + UV1H_EVENT_OCCURRED0_RTC1_MASK; + else + return uv_read_global_mmr64(pnode, UV2H_EVENT_OCCURRED2) & + UV2H_EVENT_OCCURRED2_RTC_1_MASK; } /* Setup interrupt and return non-zero if early expiration occurred. */ @@ -114,8 +118,12 @@ static int uv_setup_intr(int cpu, u64 expires) UVH_RTC1_INT_CONFIG_M_MASK); uv_write_global_mmr64(pnode, UVH_INT_CMPB, -1L); - uv_write_global_mmr64(pnode, UVH_EVENT_OCCURRED0_ALIAS, - UVH_EVENT_OCCURRED0_RTC1_MASK); + if (is_uv1_hub()) + uv_write_global_mmr64(pnode, UVH_EVENT_OCCURRED0_ALIAS, + UV1H_EVENT_OCCURRED0_RTC1_MASK); + else + uv_write_global_mmr64(pnode, UV2H_EVENT_OCCURRED2_ALIAS, + UV2H_EVENT_OCCURRED2_RTC_1_MASK); val = (X86_PLATFORM_IPI_VECTOR << UVH_RTC1_INT_CONFIG_VECTOR_SHFT) | ((u64)apicid << UVH_RTC1_INT_CONFIG_APIC_ID_SHFT); -- cgit v1.2.3 From f073cc8f39b48fdf4c8cd9520a6028fe69199b60 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Tue, 24 May 2011 13:07:36 -0500 Subject: x86, UV: Clean up uv_tlb.c SGI UV's uv_tlb.c driver has become rather hard to read, with overly large functions, non-standard coding style and (way) too long variable, constant and function names and non-obvious code flow sequences. This patch improves the readability and maintainability of the driver significantly, by doing the following strict code cleanups with no side effects: - Split long functions into shorter logical functions. - Shortened some variable and structure member names. - Added special functions for reads and writes of MMR regs with very long names. - Added the 'tunables' table to shortened tunables_write(). - Added the 'stat_description' table to shorten uv_ptc_proc_write(). - Pass fewer 'stat' arguments where it can be derived from the 'bcp' argument. - Function definitions consistent on one line, and inline in few (short) cases. - Moved some small structures and an atomic inline function to the header file. - Moved some local variables to the blocks where they are used. - Updated the copyright date. - Shortened uv_write_global_mmr64() etc. using some aliasing; no line breaks. Renamed many uv_.. functions that are not exported. - Aligned structure fields. [ note that not all structures are aligned the same way though; I'd like to keep the extensive commenting in some of them. ] - Shortened some long structure names. - Standard pass/fail exit from init_per_cpu() - Vertical alignment for mass initializations. - More separation between blocks of code. Tested on a 16-processor Altix UV. Signed-off-by: Cliff Wickman Cc: penberg@kernel.org Link: http://lkml.kernel.org/r/E1QOw12-0004MN-Lp@eag09.americas.sgi.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uv/uv_bau.h | 554 +++++++++------ arch/x86/platform/uv/tlb_uv.c | 1444 ++++++++++++++++++++------------------ 2 files changed, 1099 insertions(+), 899 deletions(-) diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 0652a5a9fd62..a291c40efd43 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -5,7 +5,7 @@ * * SGI UV Broadcast Assist Unit definitions * - * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved. + * Copyright (C) 2008-2011 Silicon Graphics, Inc. All rights reserved. */ #ifndef _ASM_X86_UV_UV_BAU_H @@ -35,9 +35,9 @@ #define MAX_CPUS_PER_UVHUB 64 #define MAX_CPUS_PER_SOCKET 32 -#define UV_ADP_SIZE 64 /* hardware-provided max. */ -#define UV_CPUS_PER_ACT_STATUS 32 /* hardware-provided max. */ -#define UV_ITEMS_PER_DESCRIPTOR 8 +#define ADP_SZ 64 /* hardware-provided max. */ +#define UV_CPUS_PER_AS 32 /* hardware-provided max. */ +#define ITEMS_PER_DESC 8 /* the 'throttle' to prevent the hardware stay-busy bug */ #define MAX_BAU_CONCURRENT 3 #define UV_ACT_STATUS_MASK 0x3 @@ -48,7 +48,7 @@ #define UV2_NET_ENDPOINT_INTD 0x28 #define UV_NET_ENDPOINT_INTD (is_uv1_hub() ? \ UV1_NET_ENDPOINT_INTD : UV2_NET_ENDPOINT_INTD) -#define UV_DESC_BASE_PNODE_SHIFT 49 +#define UV_DESC_PSHIFT 49 #define UV_PAYLOADQ_PNODE_SHIFT 49 #define UV_PTC_BASENAME "sgi_uv/ptc_statistics" #define UV_BAU_BASENAME "sgi_uv/bau_tunables" @@ -56,7 +56,8 @@ #define UV_BAU_TUNABLES_FILE "bau_tunables" #define WHITESPACE " \t\n" #define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask)) - +#define cpubit_isset(cpu, bau_local_cpumask) \ + test_bit((cpu), (bau_local_cpumask).bits) /* [19:16] SOFT_ACK timeout period 19: 1 is urgency 7 17:16 1 is multiplier */ /* @@ -72,25 +73,37 @@ UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD : \ UV2_INTD_SOFT_ACK_TIMEOUT_PERIOD) -#define BAU_MISC_CONTROL_MULT_MASK 3 +#define BAU_MISC_CONTROL_MULT_MASK 3 -#define UVH_AGING_PRESCALE_SEL 0x000000b000UL +#define UVH_AGING_PRESCALE_SEL 0x000000b000UL /* [30:28] URGENCY_7 an index into a table of times */ -#define BAU_URGENCY_7_SHIFT 28 -#define BAU_URGENCY_7_MASK 7 +#define BAU_URGENCY_7_SHIFT 28 +#define BAU_URGENCY_7_MASK 7 -#define UVH_TRANSACTION_TIMEOUT 0x000000b200UL +#define UVH_TRANSACTION_TIMEOUT 0x000000b200UL /* [45:40] BAU - BAU transaction timeout select - a multiplier */ -#define BAU_TRANS_SHIFT 40 -#define BAU_TRANS_MASK 0x3f +#define BAU_TRANS_SHIFT 40 +#define BAU_TRANS_MASK 0x3f + +/* + * shorten some awkward names + */ +#define AS_PUSH_SHIFT UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT +#define SOFTACK_MSHIFT UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT +#define SOFTACK_PSHIFT UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT +#define SOFTACK_TIMEOUT_PERIOD UV_INTD_SOFT_ACK_TIMEOUT_PERIOD +#define write_gmmr uv_write_global_mmr64 +#define write_lmmr uv_write_local_mmr +#define read_lmmr uv_read_local_mmr +#define read_gmmr uv_read_global_mmr64 /* * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1 */ -#define DESC_STATUS_IDLE 0 -#define DESC_STATUS_ACTIVE 1 -#define DESC_STATUS_DESTINATION_TIMEOUT 2 -#define DESC_STATUS_SOURCE_TIMEOUT 3 +#define DS_IDLE 0 +#define DS_ACTIVE 1 +#define DS_DESTINATION_TIMEOUT 2 +#define DS_SOURCE_TIMEOUT 3 /* * bits put together from HRP_LB_BAU_SB_ACTIVATION_STATUS_0/1/2 * values 1 and 5 will not occur @@ -111,22 +124,22 @@ * threshholds at which to use IPI to free resources */ /* after this # consecutive 'plugged' timeouts, use IPI to release resources */ -#define PLUGSB4RESET 100 +#define PLUGSB4RESET 100 /* after this many consecutive timeouts, use IPI to release resources */ -#define TIMEOUTSB4RESET 1 +#define TIMEOUTSB4RESET 1 /* at this number uses of IPI to release resources, giveup the request */ -#define IPI_RESET_LIMIT 1 +#define IPI_RESET_LIMIT 1 /* after this # consecutive successes, bump up the throttle if it was lowered */ -#define COMPLETE_THRESHOLD 5 +#define COMPLETE_THRESHOLD 5 -#define UV_LB_SUBNODEID 0x10 +#define UV_LB_SUBNODEID 0x10 /* these two are the same for UV1 and UV2: */ #define UV_SA_SHFT UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT #define UV_SA_MASK UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK /* 4 bits of software ack period */ -#define UV2_ACK_MASK 0x7UL -#define UV2_ACK_UNITS_SHFT 3 +#define UV2_ACK_MASK 0x7UL +#define UV2_ACK_UNITS_SHFT 3 #define UV2_LEG_SHFT UV2H_LB_BAU_MISC_CONTROL_USE_LEGACY_DESCRIPTOR_FORMATS_SHFT #define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT @@ -149,9 +162,16 @@ /* * tuning the action when the numalink network is extremely delayed */ -#define CONGESTED_RESPONSE_US 1000 /* 'long' response time, in microseconds */ -#define CONGESTED_REPS 10 /* long delays averaged over this many broadcasts */ -#define CONGESTED_PERIOD 30 /* time for the bau to be disabled, in seconds */ +#define CONGESTED_RESPONSE_US 1000 /* 'long' response time, in + microseconds */ +#define CONGESTED_REPS 10 /* long delays averaged over + this many broadcasts */ +#define CONGESTED_PERIOD 30 /* time for the bau to be + disabled, in seconds */ +/* see msg_type: */ +#define MSG_NOOP 0 +#define MSG_REGULAR 1 +#define MSG_RETRY 2 /* * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor) @@ -163,8 +183,8 @@ * 'base_dest_nasid' field of the header corresponds to the * destination nodeID associated with that specified bit. */ -struct bau_target_uvhubmask { - unsigned long bits[BITS_TO_LONGS(UV_DISTRIBUTION_SIZE)]; +struct bau_targ_hubmask { + unsigned long bits[BITS_TO_LONGS(UV_DISTRIBUTION_SIZE)]; }; /* @@ -173,7 +193,7 @@ struct bau_target_uvhubmask { * enough bits for max. cpu's per uvhub) */ struct bau_local_cpumask { - unsigned long bits; + unsigned long bits; }; /* @@ -194,14 +214,14 @@ struct bau_local_cpumask { * The payload is software-defined for INTD transactions */ struct bau_msg_payload { - unsigned long address; /* signifies a page or all TLB's - of the cpu */ + unsigned long address; /* signifies a page or all + TLB's of the cpu */ /* 64 bits */ - unsigned short sending_cpu; /* filled in by sender */ + unsigned short sending_cpu; /* filled in by sender */ /* 16 bits */ - unsigned short acknowledge_count;/* filled in by destination */ + unsigned short acknowledge_count; /* filled in by destination */ /* 16 bits */ - unsigned int reserved1:32; /* not usable */ + unsigned int reserved1:32; /* not usable */ }; @@ -210,93 +230,96 @@ struct bau_msg_payload { * see table 4.2.3.0.1 in broacast_assist spec. */ struct bau_msg_header { - unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */ + unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */ /* bits 5:0 */ - unsigned int base_dest_nasid:15; /* nasid of the */ - /* bits 20:6 */ /* first bit in uvhub map */ - unsigned int command:8; /* message type */ + unsigned int base_dest_nasid:15; /* nasid of the first bit */ + /* bits 20:6 */ /* in uvhub map */ + unsigned int command:8; /* message type */ /* bits 28:21 */ - /* 0x38: SN3net EndPoint Message */ - unsigned int rsvd_1:3; /* must be zero */ + /* 0x38: SN3net EndPoint Message */ + unsigned int rsvd_1:3; /* must be zero */ /* bits 31:29 */ - /* int will align on 32 bits */ - unsigned int rsvd_2:9; /* must be zero */ + /* int will align on 32 bits */ + unsigned int rsvd_2:9; /* must be zero */ /* bits 40:32 */ - /* Suppl_A is 56-41 */ - unsigned int sequence:16;/* message sequence number */ - /* bits 56:41 */ /* becomes bytes 16-17 of msg */ - /* Address field (96:57) is never used as an - address (these are address bits 42:3) */ - - unsigned int rsvd_3:1; /* must be zero */ + /* Suppl_A is 56-41 */ + unsigned int sequence:16; /* message sequence number */ + /* bits 56:41 */ /* becomes bytes 16-17 of msg */ + /* Address field (96:57) is + never used as an address + (these are address bits + 42:3) */ + + unsigned int rsvd_3:1; /* must be zero */ /* bit 57 */ - /* address bits 27:4 are payload */ + /* address bits 27:4 are payload */ /* these next 24 (58-81) bits become bytes 12-14 of msg */ - /* bits 65:58 land in byte 12 */ - unsigned int replied_to:1;/* sent as 0 by the source to byte 12 */ + unsigned int replied_to:1; /* sent as 0 by the source to + byte 12 */ /* bit 58 */ - unsigned int msg_type:3; /* software type of the message*/ + unsigned int msg_type:3; /* software type of the + message */ /* bits 61:59 */ - unsigned int canceled:1; /* message canceled, resource to be freed*/ + unsigned int canceled:1; /* message canceled, resource + is to be freed*/ /* bit 62 */ - unsigned int payload_1a:1;/* not currently used */ + unsigned int payload_1a:1; /* not currently used */ /* bit 63 */ - unsigned int payload_1b:2;/* not currently used */ + unsigned int payload_1b:2; /* not currently used */ /* bits 65:64 */ /* bits 73:66 land in byte 13 */ - unsigned int payload_1ca:6;/* not currently used */ + unsigned int payload_1ca:6; /* not currently used */ /* bits 71:66 */ - unsigned int payload_1c:2;/* not currently used */ + unsigned int payload_1c:2; /* not currently used */ /* bits 73:72 */ /* bits 81:74 land in byte 14 */ - unsigned int payload_1d:6;/* not currently used */ + unsigned int payload_1d:6; /* not currently used */ /* bits 79:74 */ - unsigned int payload_1e:2;/* not currently used */ + unsigned int payload_1e:2; /* not currently used */ /* bits 81:80 */ - unsigned int rsvd_4:7; /* must be zero */ + unsigned int rsvd_4:7; /* must be zero */ /* bits 88:82 */ - unsigned int sw_ack_flag:1;/* software acknowledge flag */ + unsigned int swack_flag:1; /* software acknowledge flag */ /* bit 89 */ - /* INTD trasactions at destination are to - wait for software acknowledge */ - unsigned int rsvd_5:6; /* must be zero */ + /* INTD trasactions at + destination are to wait for + software acknowledge */ + unsigned int rsvd_5:6; /* must be zero */ /* bits 95:90 */ - unsigned int rsvd_6:5; /* must be zero */ + unsigned int rsvd_6:5; /* must be zero */ /* bits 100:96 */ - unsigned int int_both:1;/* if 1, interrupt both sockets on the uvhub */ + unsigned int int_both:1; /* if 1, interrupt both sockets + on the uvhub */ /* bit 101*/ - unsigned int fairness:3;/* usually zero */ + unsigned int fairness:3; /* usually zero */ /* bits 104:102 */ - unsigned int multilevel:1; /* multi-level multicast format */ + unsigned int multilevel:1; /* multi-level multicast + format */ /* bit 105 */ - /* 0 for TLB: endpoint multi-unicast messages */ - unsigned int chaining:1;/* next descriptor is part of this activation*/ + /* 0 for TLB: endpoint multi-unicast messages */ + unsigned int chaining:1; /* next descriptor is part of + this activation*/ /* bit 106 */ - unsigned int rsvd_7:21; /* must be zero */ + unsigned int rsvd_7:21; /* must be zero */ /* bits 127:107 */ }; -/* see msg_type: */ -#define MSG_NOOP 0 -#define MSG_REGULAR 1 -#define MSG_RETRY 2 - /* * The activation descriptor: * The format of the message to send, plus all accompanying control * Should be 64 bytes */ struct bau_desc { - struct bau_target_uvhubmask distribution; + struct bau_targ_hubmask distribution; /* * message template, consisting of header and payload: */ - struct bau_msg_header header; - struct bau_msg_payload payload; + struct bau_msg_header header; + struct bau_msg_payload payload; }; /* * -payload-- ---------header------ @@ -315,59 +338,51 @@ struct bau_desc { * are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17 * bytes of usable data, including the sw ack vector in byte 15 (bits 127:120) * (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from - * sw_ack_vector and payload_2) + * swack_vec and payload_2) * "Enabling Software Acknowledgment mode (see Section 4.3.3 Software * Acknowledge Processing) also selects 32 byte (17 bytes usable) payload * operation." */ -struct bau_payload_queue_entry { - unsigned long address; /* signifies a page or all TLB's - of the cpu */ +struct bau_pq_entry { + unsigned long address; /* signifies a page or all TLB's + of the cpu */ /* 64 bits, bytes 0-7 */ - - unsigned short sending_cpu; /* cpu that sent the message */ + unsigned short sending_cpu; /* cpu that sent the message */ /* 16 bits, bytes 8-9 */ - - unsigned short acknowledge_count; /* filled in by destination */ + unsigned short acknowledge_count; /* filled in by destination */ /* 16 bits, bytes 10-11 */ - /* these next 3 bytes come from bits 58-81 of the message header */ - unsigned short replied_to:1; /* sent as 0 by the source */ - unsigned short msg_type:3; /* software message type */ - unsigned short canceled:1; /* sent as 0 by the source */ - unsigned short unused1:3; /* not currently using */ + unsigned short replied_to:1; /* sent as 0 by the source */ + unsigned short msg_type:3; /* software message type */ + unsigned short canceled:1; /* sent as 0 by the source */ + unsigned short unused1:3; /* not currently using */ /* byte 12 */ - - unsigned char unused2a; /* not currently using */ + unsigned char unused2a; /* not currently using */ /* byte 13 */ - unsigned char unused2; /* not currently using */ + unsigned char unused2; /* not currently using */ /* byte 14 */ - - unsigned char sw_ack_vector; /* filled in by the hardware */ + unsigned char swack_vec; /* filled in by the hardware */ /* byte 15 (bits 127:120) */ - - unsigned short sequence; /* message sequence number */ + unsigned short sequence; /* message sequence number */ /* bytes 16-17 */ - unsigned char unused4[2]; /* not currently using bytes 18-19 */ + unsigned char unused4[2]; /* not currently using bytes 18-19 */ /* bytes 18-19 */ - - int number_of_cpus; /* filled in at destination */ + int number_of_cpus; /* filled in at destination */ /* 32 bits, bytes 20-23 (aligned) */ - - unsigned char unused5[8]; /* not using */ + unsigned char unused5[8]; /* not using */ /* bytes 24-31 */ }; struct msg_desc { - struct bau_payload_queue_entry *msg; - int msg_slot; - int sw_ack_slot; - struct bau_payload_queue_entry *va_queue_first; - struct bau_payload_queue_entry *va_queue_last; + struct bau_pq_entry *msg; + int msg_slot; + int swack_slot; + struct bau_pq_entry *queue_first; + struct bau_pq_entry *queue_last; }; struct reset_args { - int sender; + int sender; }; /* @@ -375,112 +390,226 @@ struct reset_args { */ struct ptc_stats { /* sender statistics */ - unsigned long s_giveup; /* number of fall backs to IPI-style flushes */ - unsigned long s_requestor; /* number of shootdown requests */ - unsigned long s_stimeout; /* source side timeouts */ - unsigned long s_dtimeout; /* destination side timeouts */ - unsigned long s_time; /* time spent in sending side */ - unsigned long s_retriesok; /* successful retries */ - unsigned long s_ntargcpu; /* total number of cpu's targeted */ - unsigned long s_ntargself; /* times the sending cpu was targeted */ - unsigned long s_ntarglocals; /* targets of cpus on the local blade */ - unsigned long s_ntargremotes; /* targets of cpus on remote blades */ - unsigned long s_ntarglocaluvhub; /* targets of the local hub */ - unsigned long s_ntargremoteuvhub; /* remotes hubs targeted */ - unsigned long s_ntarguvhub; /* total number of uvhubs targeted */ - unsigned long s_ntarguvhub16; /* number of times target hubs >= 16*/ - unsigned long s_ntarguvhub8; /* number of times target hubs >= 8 */ - unsigned long s_ntarguvhub4; /* number of times target hubs >= 4 */ - unsigned long s_ntarguvhub2; /* number of times target hubs >= 2 */ - unsigned long s_ntarguvhub1; /* number of times target hubs == 1 */ - unsigned long s_resets_plug; /* ipi-style resets from plug state */ - unsigned long s_resets_timeout; /* ipi-style resets from timeouts */ - unsigned long s_busy; /* status stayed busy past s/w timer */ - unsigned long s_throttles; /* waits in throttle */ - unsigned long s_retry_messages; /* retry broadcasts */ - unsigned long s_bau_reenabled; /* for bau enable/disable */ - unsigned long s_bau_disabled; /* for bau enable/disable */ + unsigned long s_giveup; /* number of fall backs to + IPI-style flushes */ + unsigned long s_requestor; /* number of shootdown + requests */ + unsigned long s_stimeout; /* source side timeouts */ + unsigned long s_dtimeout; /* destination side timeouts */ + unsigned long s_time; /* time spent in sending side */ + unsigned long s_retriesok; /* successful retries */ + unsigned long s_ntargcpu; /* total number of cpu's + targeted */ + unsigned long s_ntargself; /* times the sending cpu was + targeted */ + unsigned long s_ntarglocals; /* targets of cpus on the local + blade */ + unsigned long s_ntargremotes; /* targets of cpus on remote + blades */ + unsigned long s_ntarglocaluvhub; /* targets of the local hub */ + unsigned long s_ntargremoteuvhub; /* remotes hubs targeted */ + unsigned long s_ntarguvhub; /* total number of uvhubs + targeted */ + unsigned long s_ntarguvhub16; /* number of times target + hubs >= 16*/ + unsigned long s_ntarguvhub8; /* number of times target + hubs >= 8 */ + unsigned long s_ntarguvhub4; /* number of times target + hubs >= 4 */ + unsigned long s_ntarguvhub2; /* number of times target + hubs >= 2 */ + unsigned long s_ntarguvhub1; /* number of times target + hubs == 1 */ + unsigned long s_resets_plug; /* ipi-style resets from plug + state */ + unsigned long s_resets_timeout; /* ipi-style resets from + timeouts */ + unsigned long s_busy; /* status stayed busy past + s/w timer */ + unsigned long s_throttles; /* waits in throttle */ + unsigned long s_retry_messages; /* retry broadcasts */ + unsigned long s_bau_reenabled; /* for bau enable/disable */ + unsigned long s_bau_disabled; /* for bau enable/disable */ /* destination statistics */ - unsigned long d_alltlb; /* times all tlb's on this cpu were flushed */ - unsigned long d_onetlb; /* times just one tlb on this cpu was flushed */ - unsigned long d_multmsg; /* interrupts with multiple messages */ - unsigned long d_nomsg; /* interrupts with no message */ - unsigned long d_time; /* time spent on destination side */ - unsigned long d_requestee; /* number of messages processed */ - unsigned long d_retries; /* number of retry messages processed */ - unsigned long d_canceled; /* number of messages canceled by retries */ - unsigned long d_nocanceled; /* retries that found nothing to cancel */ - unsigned long d_resets; /* number of ipi-style requests processed */ - unsigned long d_rcanceled; /* number of messages canceled by resets */ + unsigned long d_alltlb; /* times all tlb's on this + cpu were flushed */ + unsigned long d_onetlb; /* times just one tlb on this + cpu was flushed */ + unsigned long d_multmsg; /* interrupts with multiple + messages */ + unsigned long d_nomsg; /* interrupts with no message */ + unsigned long d_time; /* time spent on destination + side */ + unsigned long d_requestee; /* number of messages + processed */ + unsigned long d_retries; /* number of retry messages + processed */ + unsigned long d_canceled; /* number of messages canceled + by retries */ + unsigned long d_nocanceled; /* retries that found nothing + to cancel */ + unsigned long d_resets; /* number of ipi-style requests + processed */ + unsigned long d_rcanceled; /* number of messages canceled + by resets */ +}; + +struct tunables { + int *tunp; + int deflt; }; struct hub_and_pnode { - short uvhub; - short pnode; + short uvhub; + short pnode; +}; + +struct socket_desc { + short num_cpus; + short cpu_number[MAX_CPUS_PER_SOCKET]; +}; + +struct uvhub_desc { + unsigned short socket_mask; + short num_cpus; + short uvhub; + short pnode; + struct socket_desc socket[2]; }; + /* * one per-cpu; to locate the software tables */ struct bau_control { - struct bau_desc *descriptor_base; - struct bau_payload_queue_entry *va_queue_first; - struct bau_payload_queue_entry *va_queue_last; - struct bau_payload_queue_entry *bau_msg_head; - struct bau_control *uvhub_master; - struct bau_control *socket_master; - struct ptc_stats *statp; - unsigned long timeout_interval; - unsigned long set_bau_on_time; - atomic_t active_descriptor_count; - int plugged_tries; - int timeout_tries; - int ipi_attempts; - int conseccompletes; - int baudisabled; - int set_bau_off; - short cpu; - short osnode; - short uvhub_cpu; - short uvhub; - short cpus_in_socket; - short cpus_in_uvhub; - short partition_base_pnode; - unsigned short message_number; - unsigned short uvhub_quiesce; - short socket_acknowledge_count[DEST_Q_SIZE]; - cycles_t send_message; - spinlock_t uvhub_lock; - spinlock_t queue_lock; + struct bau_desc *descriptor_base; + struct bau_pq_entry *queue_first; + struct bau_pq_entry *queue_last; + struct bau_pq_entry *bau_msg_head; + struct bau_control *uvhub_master; + struct bau_control *socket_master; + struct ptc_stats *statp; + unsigned long timeout_interval; + unsigned long set_bau_on_time; + atomic_t active_descriptor_count; + int plugged_tries; + int timeout_tries; + int ipi_attempts; + int conseccompletes; + int baudisabled; + int set_bau_off; + short cpu; + short osnode; + short uvhub_cpu; + short uvhub; + short cpus_in_socket; + short cpus_in_uvhub; + short partition_base_pnode; + unsigned short message_number; + unsigned short uvhub_quiesce; + short socket_acknowledge_count[DEST_Q_SIZE]; + cycles_t send_message; + spinlock_t uvhub_lock; + spinlock_t queue_lock; /* tunables */ - int max_bau_concurrent; - int max_bau_concurrent_constant; - int plugged_delay; - int plugsb4reset; - int timeoutsb4reset; - int ipi_reset_limit; - int complete_threshold; - int congested_response_us; - int congested_reps; - int congested_period; - cycles_t period_time; - long period_requests; - struct hub_and_pnode *target_hub_and_pnode; + int max_concurr; + int max_concurr_const; + int plugged_delay; + int plugsb4reset; + int timeoutsb4reset; + int ipi_reset_limit; + int complete_threshold; + int cong_response_us; + int cong_reps; + int cong_period; + cycles_t period_time; + long period_requests; + struct hub_and_pnode *thp; }; -static inline int bau_uvhub_isset(int uvhub, struct bau_target_uvhubmask *dstp) +static unsigned long read_mmr_uv2_status(void) +{ + return read_lmmr(UV2H_LB_BAU_SB_ACTIVATION_STATUS_2); +} + +static void write_mmr_data_broadcast(int pnode, unsigned long mmr_image) +{ + write_gmmr(pnode, UVH_BAU_DATA_BROADCAST, mmr_image); +} + +static void write_mmr_descriptor_base(int pnode, unsigned long mmr_image) +{ + write_gmmr(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, mmr_image); +} + +static void write_mmr_activation(unsigned long index) +{ + write_lmmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index); +} + +static void write_gmmr_activation(int pnode, unsigned long mmr_image) +{ + write_gmmr(pnode, UVH_LB_BAU_SB_ACTIVATION_CONTROL, mmr_image); +} + +static void write_mmr_payload_first(int pnode, unsigned long mmr_image) +{ + write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, mmr_image); +} + +static void write_mmr_payload_tail(int pnode, unsigned long mmr_image) +{ + write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, mmr_image); +} + +static void write_mmr_payload_last(int pnode, unsigned long mmr_image) +{ + write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST, mmr_image); +} + +static void write_mmr_misc_control(int pnode, unsigned long mmr_image) +{ + write_gmmr(pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); +} + +static unsigned long read_mmr_misc_control(int pnode) +{ + return read_gmmr(pnode, UVH_LB_BAU_MISC_CONTROL); +} + +static void write_mmr_sw_ack(unsigned long mr) +{ + uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr); +} + +static unsigned long read_mmr_sw_ack(void) +{ + return read_lmmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE); +} + +static unsigned long read_gmmr_sw_ack(int pnode) +{ + return read_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE); +} + +static void write_mmr_data_config(int pnode, unsigned long mr) +{ + uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, mr); +} + +static inline int bau_uvhub_isset(int uvhub, struct bau_targ_hubmask *dstp) { return constant_test_bit(uvhub, &dstp->bits[0]); } -static inline void bau_uvhub_set(int pnode, struct bau_target_uvhubmask *dstp) +static inline void bau_uvhub_set(int pnode, struct bau_targ_hubmask *dstp) { __set_bit(pnode, &dstp->bits[0]); } -static inline void bau_uvhubs_clear(struct bau_target_uvhubmask *dstp, +static inline void bau_uvhubs_clear(struct bau_targ_hubmask *dstp, int nbits) { bitmap_zero(&dstp->bits[0], nbits); } -static inline int bau_uvhub_weight(struct bau_target_uvhubmask *dstp) +static inline int bau_uvhub_weight(struct bau_targ_hubmask *dstp) { return bitmap_weight((unsigned long *)&dstp->bits[0], UV_DISTRIBUTION_SIZE); @@ -491,9 +620,6 @@ static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits) bitmap_zero(&dstp->bits, nbits); } -#define cpubit_isset(cpu, bau_local_cpumask) \ - test_bit((cpu), (bau_local_cpumask).bits) - extern void uv_bau_message_intr1(void); extern void uv_bau_timeout_intr1(void); @@ -501,7 +627,7 @@ struct atomic_short { short counter; }; -/** +/* * atomic_read_short - read a short atomic variable * @v: pointer of type atomic_short * @@ -512,14 +638,14 @@ static inline int atomic_read_short(const struct atomic_short *v) return v->counter; } -/** - * atomic_add_short_return - add and return a short int +/* + * atom_asr - add and return a short int * @i: short value to add * @v: pointer of type atomic_short * * Atomically adds @i to @v and returns @i + @v */ -static inline int atomic_add_short_return(short i, struct atomic_short *v) +static inline int atom_asr(short i, struct atomic_short *v) { short __i = i; asm volatile(LOCK_PREFIX "xaddw %0, %1" @@ -528,4 +654,26 @@ static inline int atomic_add_short_return(short i, struct atomic_short *v) return i + __i; } +/* + * conditionally add 1 to *v, unless *v is >= u + * return 0 if we cannot add 1 to *v because it is >= u + * return 1 if we can add 1 to *v because it is < u + * the add is atomic + * + * This is close to atomic_add_unless(), but this allows the 'u' value + * to be lowered below the current 'v'. atomic_add_unless can only stop + * on equal. + */ +static inline int atomic_inc_unless_ge(spinlock_t *lock, atomic_t *v, int u) +{ + spin_lock(lock); + if (atomic_read(v) >= u) { + spin_unlock(lock); + return 0; + } + atomic_inc(v); + spin_unlock(lock); + return 1; +} + #endif /* _ASM_X86_UV_UV_BAU_H */ diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index a9856c09c425..68e467f69fec 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -1,7 +1,7 @@ /* * SGI UltraViolet TLB flush routines. * - * (c) 2008-2010 Cliff Wickman , SGI. + * (c) 2008-2011 Cliff Wickman , SGI. * * This code is released under the GNU General Public License version 2 or * later. @@ -35,6 +35,7 @@ static int timeout_base_ns[] = { 5242880, 167772160 }; + static int timeout_us; static int nobau; static int baudisabled; @@ -42,20 +43,70 @@ static spinlock_t disable_lock; static cycles_t congested_cycles; /* tunables: */ -static int max_bau_concurrent = MAX_BAU_CONCURRENT; -static int max_bau_concurrent_constant = MAX_BAU_CONCURRENT; -static int plugged_delay = PLUGGED_DELAY; -static int plugsb4reset = PLUGSB4RESET; -static int timeoutsb4reset = TIMEOUTSB4RESET; -static int ipi_reset_limit = IPI_RESET_LIMIT; -static int complete_threshold = COMPLETE_THRESHOLD; -static int congested_response_us = CONGESTED_RESPONSE_US; -static int congested_reps = CONGESTED_REPS; -static int congested_period = CONGESTED_PERIOD; +static int max_concurr = MAX_BAU_CONCURRENT; +static int max_concurr_const = MAX_BAU_CONCURRENT; +static int plugged_delay = PLUGGED_DELAY; +static int plugsb4reset = PLUGSB4RESET; +static int timeoutsb4reset = TIMEOUTSB4RESET; +static int ipi_reset_limit = IPI_RESET_LIMIT; +static int complete_threshold = COMPLETE_THRESHOLD; +static int congested_respns_us = CONGESTED_RESPONSE_US; +static int congested_reps = CONGESTED_REPS; +static int congested_period = CONGESTED_PERIOD; + +static struct tunables tunables[] = { + {&max_concurr, MAX_BAU_CONCURRENT}, /* must be [0] */ + {&plugged_delay, PLUGGED_DELAY}, + {&plugsb4reset, PLUGSB4RESET}, + {&timeoutsb4reset, TIMEOUTSB4RESET}, + {&ipi_reset_limit, IPI_RESET_LIMIT}, + {&complete_threshold, COMPLETE_THRESHOLD}, + {&congested_respns_us, CONGESTED_RESPONSE_US}, + {&congested_reps, CONGESTED_REPS}, + {&congested_period, CONGESTED_PERIOD} +}; + static struct dentry *tunables_dir; static struct dentry *tunables_file; -static int __init setup_nobau(char *arg) +/* these correspond to the statistics printed by ptc_seq_show() */ +static char *stat_description[] = { + "sent: number of shootdown messages sent", + "stime: time spent sending messages", + "numuvhubs: number of hubs targeted with shootdown", + "numuvhubs16: number times 16 or more hubs targeted", + "numuvhubs8: number times 8 or more hubs targeted", + "numuvhubs4: number times 4 or more hubs targeted", + "numuvhubs2: number times 2 or more hubs targeted", + "numuvhubs1: number times 1 hub targeted", + "numcpus: number of cpus targeted with shootdown", + "dto: number of destination timeouts", + "retries: destination timeout retries sent", + "rok: : destination timeouts successfully retried", + "resetp: ipi-style resource resets for plugs", + "resett: ipi-style resource resets for timeouts", + "giveup: fall-backs to ipi-style shootdowns", + "sto: number of source timeouts", + "bz: number of stay-busy's", + "throt: number times spun in throttle", + "swack: image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE", + "recv: shootdown messages received", + "rtime: time spent processing messages", + "all: shootdown all-tlb messages", + "one: shootdown one-tlb messages", + "mult: interrupts that found multiple messages", + "none: interrupts that found no messages", + "retry: number of retry messages processed", + "canc: number messages canceled by retries", + "nocan: number retries that found nothing to cancel", + "reset: number of ipi-style reset requests processed", + "rcan: number messages canceled by reset requests", + "disable: number times use of the BAU was disabled", + "enable: number times use of the BAU was re-enabled" +}; + +static int __init +setup_nobau(char *arg) { nobau = 1; return 0; @@ -63,7 +114,7 @@ static int __init setup_nobau(char *arg) early_param("nobau", setup_nobau); /* base pnode in this partition */ -static int uv_partition_base_pnode __read_mostly; +static int uv_base_pnode __read_mostly; /* position of pnode (which is nasid>>1): */ static int uv_nshift __read_mostly; static unsigned long uv_mmask __read_mostly; @@ -109,60 +160,52 @@ static int __init uvhub_to_first_apicid(int uvhub) * clear of the Timeout bit (as well) will free the resource. No reply will * be sent (the hardware will only do one reply per message). */ -static inline void uv_reply_to_message(struct msg_desc *mdp, - struct bau_control *bcp) +static void reply_to_message(struct msg_desc *mdp, struct bau_control *bcp) { unsigned long dw; - struct bau_payload_queue_entry *msg; + struct bau_pq_entry *msg; msg = mdp->msg; if (!msg->canceled) { - dw = (msg->sw_ack_vector << UV_SW_ACK_NPENDING) | - msg->sw_ack_vector; - uv_write_local_mmr( - UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, dw); + dw = (msg->swack_vec << UV_SW_ACK_NPENDING) | msg->swack_vec; + write_mmr_sw_ack(dw); } msg->replied_to = 1; - msg->sw_ack_vector = 0; + msg->swack_vec = 0; } /* * Process the receipt of a RETRY message */ -static inline void uv_bau_process_retry_msg(struct msg_desc *mdp, - struct bau_control *bcp) +static void bau_process_retry_msg(struct msg_desc *mdp, + struct bau_control *bcp) { int i; int cancel_count = 0; - int slot2; unsigned long msg_res; unsigned long mmr = 0; - struct bau_payload_queue_entry *msg; - struct bau_payload_queue_entry *msg2; - struct ptc_stats *stat; + struct bau_pq_entry *msg = mdp->msg; + struct bau_pq_entry *msg2; + struct ptc_stats *stat = bcp->statp; - msg = mdp->msg; - stat = bcp->statp; stat->d_retries++; /* * cancel any message from msg+1 to the retry itself */ for (msg2 = msg+1, i = 0; i < DEST_Q_SIZE; msg2++, i++) { - if (msg2 > mdp->va_queue_last) - msg2 = mdp->va_queue_first; + if (msg2 > mdp->queue_last) + msg2 = mdp->queue_first; if (msg2 == msg) break; - /* same conditions for cancellation as uv_do_reset */ + /* same conditions for cancellation as do_reset */ if ((msg2->replied_to == 0) && (msg2->canceled == 0) && - (msg2->sw_ack_vector) && ((msg2->sw_ack_vector & - msg->sw_ack_vector) == 0) && + (msg2->swack_vec) && ((msg2->swack_vec & + msg->swack_vec) == 0) && (msg2->sending_cpu == msg->sending_cpu) && (msg2->msg_type != MSG_NOOP)) { - slot2 = msg2 - mdp->va_queue_first; - mmr = uv_read_local_mmr - (UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE); - msg_res = msg2->sw_ack_vector; + mmr = read_mmr_sw_ack(); + msg_res = msg2->swack_vec; /* * This is a message retry; clear the resources held * by the previous message only if they timed out. @@ -170,6 +213,7 @@ static inline void uv_bau_process_retry_msg(struct msg_desc *mdp, * situation to report. */ if (mmr & (msg_res << UV_SW_ACK_NPENDING)) { + unsigned long mr; /* * is the resource timed out? * make everyone ignore the cancelled message. @@ -177,10 +221,8 @@ static inline void uv_bau_process_retry_msg(struct msg_desc *mdp, msg2->canceled = 1; stat->d_canceled++; cancel_count++; - uv_write_local_mmr( - UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, - (msg_res << UV_SW_ACK_NPENDING) | - msg_res); + mr = (msg_res << UV_SW_ACK_NPENDING) | msg_res; + write_mmr_sw_ack(mr); } } } @@ -192,20 +234,19 @@ static inline void uv_bau_process_retry_msg(struct msg_desc *mdp, * Do all the things a cpu should do for a TLB shootdown message. * Other cpu's may come here at the same time for this message. */ -static void uv_bau_process_message(struct msg_desc *mdp, - struct bau_control *bcp) +static void bau_process_message(struct msg_desc *mdp, + struct bau_control *bcp) { - int msg_ack_count; short socket_ack_count = 0; - struct ptc_stats *stat; - struct bau_payload_queue_entry *msg; + short *sp; + struct atomic_short *asp; + struct ptc_stats *stat = bcp->statp; + struct bau_pq_entry *msg = mdp->msg; struct bau_control *smaster = bcp->socket_master; /* * This must be a normal message, or retry of a normal message */ - msg = mdp->msg; - stat = bcp->statp; if (msg->address == TLB_FLUSH_ALL) { local_flush_tlb(); stat->d_alltlb++; @@ -222,30 +263,32 @@ static void uv_bau_process_message(struct msg_desc *mdp, * cpu number. */ if (msg->msg_type == MSG_RETRY && bcp == bcp->uvhub_master) - uv_bau_process_retry_msg(mdp, bcp); + bau_process_retry_msg(mdp, bcp); /* - * This is a sw_ack message, so we have to reply to it. + * This is a swack message, so we have to reply to it. * Count each responding cpu on the socket. This avoids * pinging the count's cache line back and forth between * the sockets. */ - socket_ack_count = atomic_add_short_return(1, (struct atomic_short *) - &smaster->socket_acknowledge_count[mdp->msg_slot]); + sp = &smaster->socket_acknowledge_count[mdp->msg_slot]; + asp = (struct atomic_short *)sp; + socket_ack_count = atom_asr(1, asp); if (socket_ack_count == bcp->cpus_in_socket) { + int msg_ack_count; /* * Both sockets dump their completed count total into * the message's count. */ smaster->socket_acknowledge_count[mdp->msg_slot] = 0; - msg_ack_count = atomic_add_short_return(socket_ack_count, - (struct atomic_short *)&msg->acknowledge_count); + asp = (struct atomic_short *)&msg->acknowledge_count; + msg_ack_count = atom_asr(socket_ack_count, asp); if (msg_ack_count == bcp->cpus_in_uvhub) { /* * All cpus in uvhub saw it; reply */ - uv_reply_to_message(mdp, bcp); + reply_to_message(mdp, bcp); } } @@ -268,62 +311,51 @@ static int uvhub_to_first_cpu(int uvhub) * Last resort when we get a large number of destination timeouts is * to clear resources held by a given cpu. * Do this with IPI so that all messages in the BAU message queue - * can be identified by their nonzero sw_ack_vector field. + * can be identified by their nonzero swack_vec field. * * This is entered for a single cpu on the uvhub. * The sender want's this uvhub to free a specific message's - * sw_ack resources. + * swack resources. */ -static void -uv_do_reset(void *ptr) +static void do_reset(void *ptr) { int i; - int slot; - int count = 0; - unsigned long mmr; - unsigned long msg_res; - struct bau_control *bcp; - struct reset_args *rap; - struct bau_payload_queue_entry *msg; - struct ptc_stats *stat; + struct bau_control *bcp = &per_cpu(bau_control, smp_processor_id()); + struct reset_args *rap = (struct reset_args *)ptr; + struct bau_pq_entry *msg; + struct ptc_stats *stat = bcp->statp; - bcp = &per_cpu(bau_control, smp_processor_id()); - rap = (struct reset_args *)ptr; - stat = bcp->statp; stat->d_resets++; - /* * We're looking for the given sender, and - * will free its sw_ack resource. + * will free its swack resource. * If all cpu's finally responded after the timeout, its * message 'replied_to' was set. */ - for (msg = bcp->va_queue_first, i = 0; i < DEST_Q_SIZE; msg++, i++) { - /* uv_do_reset: same conditions for cancellation as - uv_bau_process_retry_msg() */ + for (msg = bcp->queue_first, i = 0; i < DEST_Q_SIZE; msg++, i++) { + unsigned long msg_res; + /* do_reset: same conditions for cancellation as + bau_process_retry_msg() */ if ((msg->replied_to == 0) && (msg->canceled == 0) && (msg->sending_cpu == rap->sender) && - (msg->sw_ack_vector) && + (msg->swack_vec) && (msg->msg_type != MSG_NOOP)) { + unsigned long mmr; + unsigned long mr; /* * make everyone else ignore this message */ msg->canceled = 1; - slot = msg - bcp->va_queue_first; - count++; /* * only reset the resource if it is still pending */ - mmr = uv_read_local_mmr - (UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE); - msg_res = msg->sw_ack_vector; + mmr = read_mmr_sw_ack(); + msg_res = msg->swack_vec; + mr = (msg_res << UV_SW_ACK_NPENDING) | msg_res; if (mmr & msg_res) { stat->d_rcanceled++; - uv_write_local_mmr( - UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, - (msg_res << UV_SW_ACK_NPENDING) | - msg_res); + write_mmr_sw_ack(mr); } } } @@ -334,39 +366,38 @@ uv_do_reset(void *ptr) * Use IPI to get all target uvhubs to release resources held by * a given sending cpu number. */ -static void uv_reset_with_ipi(struct bau_target_uvhubmask *distribution, - int sender) +static void reset_with_ipi(struct bau_targ_hubmask *distribution, int sender) { int uvhub; - int cpu; + int maskbits; cpumask_t mask; struct reset_args reset_args; reset_args.sender = sender; - cpus_clear(mask); /* find a single cpu for each uvhub in this distribution mask */ - for (uvhub = 0; - uvhub < sizeof(struct bau_target_uvhubmask) * BITSPERBYTE; - uvhub++) { + maskbits = sizeof(struct bau_targ_hubmask) * BITSPERBYTE; + for (uvhub = 0; uvhub < maskbits; uvhub++) { + int cpu; if (!bau_uvhub_isset(uvhub, distribution)) continue; /* find a cpu for this uvhub */ cpu = uvhub_to_first_cpu(uvhub); cpu_set(cpu, mask); } - /* IPI all cpus; Preemption is already disabled */ - smp_call_function_many(&mask, uv_do_reset, (void *)&reset_args, 1); + + /* IPI all cpus; preemption is already disabled */ + smp_call_function_many(&mask, do_reset, (void *)&reset_args, 1); return; } -static inline unsigned long -cycles_2_us(unsigned long long cyc) +static inline unsigned long cycles_2_us(unsigned long long cyc) { unsigned long long ns; unsigned long us; - ns = (cyc * per_cpu(cyc2ns, smp_processor_id())) - >> CYC2NS_SCALE_FACTOR; + int cpu = smp_processor_id(); + + ns = (cyc * per_cpu(cyc2ns, cpu)) >> CYC2NS_SCALE_FACTOR; us = ns / 1000; return us; } @@ -376,21 +407,27 @@ cycles_2_us(unsigned long long cyc) * leaves uvhub_quiesce set so that no new broadcasts are started by * bau_flush_send_and_wait() */ -static inline void -quiesce_local_uvhub(struct bau_control *hmaster) +static inline void quiesce_local_uvhub(struct bau_control *hmaster) { - atomic_add_short_return(1, (struct atomic_short *) - &hmaster->uvhub_quiesce); + atom_asr(1, (struct atomic_short *)&hmaster->uvhub_quiesce); } /* * mark this quiet-requestor as done */ -static inline void -end_uvhub_quiesce(struct bau_control *hmaster) +static inline void end_uvhub_quiesce(struct bau_control *hmaster) { - atomic_add_short_return(-1, (struct atomic_short *) - &hmaster->uvhub_quiesce); + atom_asr(-1, (struct atomic_short *)&hmaster->uvhub_quiesce); +} + +static unsigned long uv1_read_status(unsigned long mmr_offset, int right_shift) +{ + unsigned long descriptor_status; + + descriptor_status = uv_read_local_mmr(mmr_offset); + descriptor_status >>= right_shift; + descriptor_status &= UV_ACT_STATUS_MASK; + return descriptor_status; } /* @@ -398,31 +435,28 @@ end_uvhub_quiesce(struct bau_control *hmaster) * return COMPLETE, RETRY(PLUGGED or TIMEOUT) or GIVEUP */ static int uv1_wait_completion(struct bau_desc *bau_desc, - unsigned long mmr_offset, int right_shift, int this_cpu, - struct bau_control *bcp, struct bau_control *smaster, long try) + unsigned long mmr_offset, int right_shift, + struct bau_control *bcp, long try) { unsigned long descriptor_status; - cycles_t ttime; + cycles_t ttm; struct ptc_stats *stat = bcp->statp; + descriptor_status = uv1_read_status(mmr_offset, right_shift); /* spin on the status MMR, waiting for it to go idle */ - while ((descriptor_status = (((unsigned long) - uv_read_local_mmr(mmr_offset) >> - right_shift) & UV_ACT_STATUS_MASK)) != - DESC_STATUS_IDLE) { + while ((descriptor_status != DS_IDLE)) { /* * Our software ack messages may be blocked because * there are no swack resources available. As long * as none of them has timed out hardware will NACK * our message and its state will stay IDLE. */ - if (descriptor_status == DESC_STATUS_SOURCE_TIMEOUT) { + if (descriptor_status == DS_SOURCE_TIMEOUT) { stat->s_stimeout++; return FLUSH_GIVEUP; - } else if (descriptor_status == - DESC_STATUS_DESTINATION_TIMEOUT) { + } else if (descriptor_status == DS_DESTINATION_TIMEOUT) { stat->s_dtimeout++; - ttime = get_cycles(); + ttm = get_cycles(); /* * Our retries may be blocked by all destination @@ -430,8 +464,7 @@ static int uv1_wait_completion(struct bau_desc *bau_desc, * pending. In that case hardware returns the * ERROR that looks like a destination timeout. */ - if (cycles_2_us(ttime - bcp->send_message) < - timeout_us) { + if (cycles_2_us(ttm - bcp->send_message) < timeout_us) { bcp->conseccompletes = 0; return FLUSH_RETRY_PLUGGED; } @@ -444,93 +477,106 @@ static int uv1_wait_completion(struct bau_desc *bau_desc, */ cpu_relax(); } + descriptor_status = uv1_read_status(mmr_offset, right_shift); } bcp->conseccompletes++; return FLUSH_COMPLETE; } -static int uv2_wait_completion(struct bau_desc *bau_desc, - unsigned long mmr_offset, int right_shift, int this_cpu, - struct bau_control *bcp, struct bau_control *smaster, long try) +/* + * UV2 has an extra bit of status in the ACTIVATION_STATUS_2 register. + */ +static unsigned long uv2_read_status(unsigned long offset, int rshft, int cpu) { unsigned long descriptor_status; unsigned long descriptor_status2; - int cpu; - cycles_t ttime; + + descriptor_status = ((read_lmmr(offset) >> rshft) & UV_ACT_STATUS_MASK); + descriptor_status2 = (read_mmr_uv2_status() >> cpu) & 0x1UL; + descriptor_status = (descriptor_status << 1) | descriptor_status2; + return descriptor_status; +} + +static int uv2_wait_completion(struct bau_desc *bau_desc, + unsigned long mmr_offset, int right_shift, + struct bau_control *bcp, long try) +{ + unsigned long descriptor_stat; + cycles_t ttm; + int cpu = bcp->uvhub_cpu; struct ptc_stats *stat = bcp->statp; - /* UV2 has an extra bit of status */ - cpu = bcp->uvhub_cpu; + descriptor_stat = uv2_read_status(mmr_offset, right_shift, cpu); + /* spin on the status MMR, waiting for it to go idle */ - descriptor_status = (((unsigned long)(uv_read_local_mmr - (mmr_offset)) >> right_shift) & UV_ACT_STATUS_MASK); - descriptor_status2 = (((unsigned long)uv_read_local_mmr - (UV2H_LB_BAU_SB_ACTIVATION_STATUS_2) >> cpu) & 0x1UL); - descriptor_status = (descriptor_status << 1) | - descriptor_status2; - while (descriptor_status != UV2H_DESC_IDLE) { + while (descriptor_stat != UV2H_DESC_IDLE) { /* * Our software ack messages may be blocked because * there are no swack resources available. As long * as none of them has timed out hardware will NACK * our message and its state will stay IDLE. */ - if ((descriptor_status == UV2H_DESC_SOURCE_TIMEOUT) || - (descriptor_status == UV2H_DESC_DEST_STRONG_NACK) || - (descriptor_status == UV2H_DESC_DEST_PUT_ERR)) { + if ((descriptor_stat == UV2H_DESC_SOURCE_TIMEOUT) || + (descriptor_stat == UV2H_DESC_DEST_STRONG_NACK) || + (descriptor_stat == UV2H_DESC_DEST_PUT_ERR)) { stat->s_stimeout++; return FLUSH_GIVEUP; - } else if (descriptor_status == UV2H_DESC_DEST_TIMEOUT) { + } else if (descriptor_stat == UV2H_DESC_DEST_TIMEOUT) { stat->s_dtimeout++; - ttime = get_cycles(); - + ttm = get_cycles(); /* * Our retries may be blocked by all destination * swack resources being consumed, and a timeout * pending. In that case hardware returns the * ERROR that looks like a destination timeout. */ - if (cycles_2_us(ttime - bcp->send_message) < - timeout_us) { + if (cycles_2_us(ttm - bcp->send_message) < timeout_us) { bcp->conseccompletes = 0; return FLUSH_RETRY_PLUGGED; } - bcp->conseccompletes = 0; return FLUSH_RETRY_TIMEOUT; } else { /* - * descriptor_status is still BUSY + * descriptor_stat is still BUSY */ cpu_relax(); } - descriptor_status = (((unsigned long)(uv_read_local_mmr - (mmr_offset)) >> right_shift) & - UV_ACT_STATUS_MASK); - descriptor_status2 = (((unsigned long)uv_read_local_mmr - (UV2H_LB_BAU_SB_ACTIVATION_STATUS_2) >> cpu) & - 0x1UL); - descriptor_status = (descriptor_status << 1) | - descriptor_status2; + descriptor_stat = uv2_read_status(mmr_offset, right_shift, cpu); } bcp->conseccompletes++; return FLUSH_COMPLETE; } -static int uv_wait_completion(struct bau_desc *bau_desc, - unsigned long mmr_offset, int right_shift, int this_cpu, - struct bau_control *bcp, struct bau_control *smaster, long try) +/* + * There are 2 status registers; each and array[32] of 2 bits. Set up for + * which register to read and position in that register based on cpu in + * current hub. + */ +static int wait_completion(struct bau_desc *bau_desc, + struct bau_control *bcp, long try) { + int right_shift; + unsigned long mmr_offset; + int cpu = bcp->uvhub_cpu; + + if (cpu < UV_CPUS_PER_AS) { + mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0; + right_shift = cpu * UV_ACT_STATUS_SIZE; + } else { + mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1; + right_shift = ((cpu - UV_CPUS_PER_AS) * UV_ACT_STATUS_SIZE); + } + if (is_uv1_hub()) return uv1_wait_completion(bau_desc, mmr_offset, right_shift, - this_cpu, bcp, smaster, try); + bcp, try); else return uv2_wait_completion(bau_desc, mmr_offset, right_shift, - this_cpu, bcp, smaster, try); + bcp, try); } -static inline cycles_t -sec_2_cycles(unsigned long sec) +static inline cycles_t sec_2_cycles(unsigned long sec) { unsigned long ns; cycles_t cyc; @@ -541,63 +587,50 @@ sec_2_cycles(unsigned long sec) } /* - * conditionally add 1 to *v, unless *v is >= u - * return 0 if we cannot add 1 to *v because it is >= u - * return 1 if we can add 1 to *v because it is < u - * the add is atomic - * - * This is close to atomic_add_unless(), but this allows the 'u' value - * to be lowered below the current 'v'. atomic_add_unless can only stop - * on equal. - */ -static inline int atomic_inc_unless_ge(spinlock_t *lock, atomic_t *v, int u) -{ - spin_lock(lock); - if (atomic_read(v) >= u) { - spin_unlock(lock); - return 0; - } - atomic_inc(v); - spin_unlock(lock); - return 1; -} - -/* - * Our retries are blocked by all destination swack resources being + * Our retries are blocked by all destination sw ack resources being * in use, and a timeout is pending. In that case hardware immediately * returns the ERROR that looks like a destination timeout. */ -static void -destination_plugged(struct bau_desc *bau_desc, struct bau_control *bcp, +static void destination_plugged(struct bau_desc *bau_desc, + struct bau_control *bcp, struct bau_control *hmaster, struct ptc_stats *stat) { udelay(bcp->plugged_delay); bcp->plugged_tries++; + if (bcp->plugged_tries >= bcp->plugsb4reset) { bcp->plugged_tries = 0; + quiesce_local_uvhub(hmaster); + spin_lock(&hmaster->queue_lock); - uv_reset_with_ipi(&bau_desc->distribution, bcp->cpu); + reset_with_ipi(&bau_desc->distribution, bcp->cpu); spin_unlock(&hmaster->queue_lock); + end_uvhub_quiesce(hmaster); + bcp->ipi_attempts++; stat->s_resets_plug++; } } -static void -destination_timeout(struct bau_desc *bau_desc, struct bau_control *bcp, - struct bau_control *hmaster, struct ptc_stats *stat) +static void destination_timeout(struct bau_desc *bau_desc, + struct bau_control *bcp, struct bau_control *hmaster, + struct ptc_stats *stat) { - hmaster->max_bau_concurrent = 1; + hmaster->max_concurr = 1; bcp->timeout_tries++; if (bcp->timeout_tries >= bcp->timeoutsb4reset) { bcp->timeout_tries = 0; + quiesce_local_uvhub(hmaster); + spin_lock(&hmaster->queue_lock); - uv_reset_with_ipi(&bau_desc->distribution, bcp->cpu); + reset_with_ipi(&bau_desc->distribution, bcp->cpu); spin_unlock(&hmaster->queue_lock); + end_uvhub_quiesce(hmaster); + bcp->ipi_attempts++; stat->s_resets_timeout++; } @@ -607,34 +640,104 @@ destination_timeout(struct bau_desc *bau_desc, struct bau_control *bcp, * Completions are taking a very long time due to a congested numalink * network. */ -static void -disable_for_congestion(struct bau_control *bcp, struct ptc_stats *stat) +static void disable_for_congestion(struct bau_control *bcp, + struct ptc_stats *stat) { - int tcpu; - struct bau_control *tbcp; - /* let only one cpu do this disabling */ spin_lock(&disable_lock); + if (!baudisabled && bcp->period_requests && ((bcp->period_time / bcp->period_requests) > congested_cycles)) { + int tcpu; + struct bau_control *tbcp; /* it becomes this cpu's job to turn on the use of the BAU again */ baudisabled = 1; bcp->set_bau_off = 1; - bcp->set_bau_on_time = get_cycles() + - sec_2_cycles(bcp->congested_period); + bcp->set_bau_on_time = get_cycles(); + bcp->set_bau_on_time += sec_2_cycles(bcp->cong_period); stat->s_bau_disabled++; for_each_present_cpu(tcpu) { tbcp = &per_cpu(bau_control, tcpu); - tbcp->baudisabled = 1; + tbcp->baudisabled = 1; } } + spin_unlock(&disable_lock); } -/** - * uv_flush_send_and_wait - * +static void count_max_concurr(int stat, struct bau_control *bcp, + struct bau_control *hmaster) +{ + bcp->plugged_tries = 0; + bcp->timeout_tries = 0; + if (stat != FLUSH_COMPLETE) + return; + if (bcp->conseccompletes <= bcp->complete_threshold) + return; + if (hmaster->max_concurr >= hmaster->max_concurr_const) + return; + hmaster->max_concurr++; +} + +static void record_send_stats(cycles_t time1, cycles_t time2, + struct bau_control *bcp, struct ptc_stats *stat, + int completion_status, int try) +{ + cycles_t elapsed; + + if (time2 > time1) { + elapsed = time2 - time1; + stat->s_time += elapsed; + + if ((completion_status == FLUSH_COMPLETE) && (try == 1)) { + bcp->period_requests++; + bcp->period_time += elapsed; + if ((elapsed > congested_cycles) && + (bcp->period_requests > bcp->cong_reps)) + disable_for_congestion(bcp, stat); + } + } else + stat->s_requestor--; + + if (completion_status == FLUSH_COMPLETE && try > 1) + stat->s_retriesok++; + else if (completion_status == FLUSH_GIVEUP) + stat->s_giveup++; +} + +/* + * Because of a uv1 hardware bug only a limited number of concurrent + * requests can be made. + */ +static void uv1_throttle(struct bau_control *hmaster, struct ptc_stats *stat) +{ + spinlock_t *lock = &hmaster->uvhub_lock; + atomic_t *v; + + v = &hmaster->active_descriptor_count; + if (!atomic_inc_unless_ge(lock, v, hmaster->max_concurr)) { + stat->s_throttles++; + do { + cpu_relax(); + } while (!atomic_inc_unless_ge(lock, v, hmaster->max_concurr)); + } +} + +/* + * Handle the completion status of a message send. + */ +static void handle_cmplt(int completion_status, struct bau_desc *bau_desc, + struct bau_control *bcp, struct bau_control *hmaster, + struct ptc_stats *stat) +{ + if (completion_status == FLUSH_RETRY_PLUGGED) + destination_plugged(bau_desc, bcp, hmaster, stat); + else if (completion_status == FLUSH_RETRY_TIMEOUT) + destination_timeout(bau_desc, bcp, hmaster, stat); +} + +/* * Send a broadcast and wait for it to complete. * * The flush_mask contains the cpus the broadcast is to be sent to including @@ -645,45 +748,23 @@ disable_for_congestion(struct bau_control *bcp, struct ptc_stats *stat) * returned to the kernel. */ int uv_flush_send_and_wait(struct bau_desc *bau_desc, - struct cpumask *flush_mask, struct bau_control *bcp) + struct cpumask *flush_mask, struct bau_control *bcp) { - int right_shift; - int completion_status = 0; int seq_number = 0; + int completion_stat = 0; long try = 0; - int cpu = bcp->uvhub_cpu; - int this_cpu = bcp->cpu; - unsigned long mmr_offset; unsigned long index; cycles_t time1; cycles_t time2; - cycles_t elapsed; struct ptc_stats *stat = bcp->statp; - struct bau_control *smaster = bcp->socket_master; struct bau_control *hmaster = bcp->uvhub_master; - if (is_uv1_hub() && - !atomic_inc_unless_ge(&hmaster->uvhub_lock, - &hmaster->active_descriptor_count, - hmaster->max_bau_concurrent)) { - stat->s_throttles++; - do { - cpu_relax(); - } while (!atomic_inc_unless_ge(&hmaster->uvhub_lock, - &hmaster->active_descriptor_count, - hmaster->max_bau_concurrent)); - } + if (is_uv1_hub()) + uv1_throttle(hmaster, stat); + while (hmaster->uvhub_quiesce) cpu_relax(); - if (cpu < UV_CPUS_PER_ACT_STATUS) { - mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_0; - right_shift = cpu * UV_ACT_STATUS_SIZE; - } else { - mmr_offset = UVH_LB_BAU_SB_ACTIVATION_STATUS_1; - right_shift = - ((cpu - UV_CPUS_PER_ACT_STATUS) * UV_ACT_STATUS_SIZE); - } time1 = get_cycles(); do { if (try == 0) { @@ -693,64 +774,134 @@ int uv_flush_send_and_wait(struct bau_desc *bau_desc, bau_desc->header.msg_type = MSG_RETRY; stat->s_retry_messages++; } + bau_desc->header.sequence = seq_number; - index = (1UL << UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT) | - bcp->uvhub_cpu; + index = (1UL << AS_PUSH_SHIFT) | bcp->uvhub_cpu; bcp->send_message = get_cycles(); - uv_write_local_mmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index); + + write_mmr_activation(index); + try++; - completion_status = uv_wait_completion(bau_desc, mmr_offset, - right_shift, this_cpu, bcp, smaster, try); + completion_stat = wait_completion(bau_desc, bcp, try); + + handle_cmplt(completion_stat, bau_desc, bcp, hmaster, stat); - if (completion_status == FLUSH_RETRY_PLUGGED) { - destination_plugged(bau_desc, bcp, hmaster, stat); - } else if (completion_status == FLUSH_RETRY_TIMEOUT) { - destination_timeout(bau_desc, bcp, hmaster, stat); - } if (bcp->ipi_attempts >= bcp->ipi_reset_limit) { bcp->ipi_attempts = 0; - completion_status = FLUSH_GIVEUP; + completion_stat = FLUSH_GIVEUP; break; } cpu_relax(); - } while ((completion_status == FLUSH_RETRY_PLUGGED) || - (completion_status == FLUSH_RETRY_TIMEOUT)); + } while ((completion_stat == FLUSH_RETRY_PLUGGED) || + (completion_stat == FLUSH_RETRY_TIMEOUT)); + time2 = get_cycles(); - bcp->plugged_tries = 0; - bcp->timeout_tries = 0; - if ((completion_status == FLUSH_COMPLETE) && - (bcp->conseccompletes > bcp->complete_threshold) && - (hmaster->max_bau_concurrent < - hmaster->max_bau_concurrent_constant)) - hmaster->max_bau_concurrent++; + + count_max_concurr(completion_stat, bcp, hmaster); + while (hmaster->uvhub_quiesce) cpu_relax(); + atomic_dec(&hmaster->active_descriptor_count); - if (time2 > time1) { - elapsed = time2 - time1; - stat->s_time += elapsed; - if ((completion_status == FLUSH_COMPLETE) && (try == 1)) { - bcp->period_requests++; - bcp->period_time += elapsed; - if ((elapsed > congested_cycles) && - (bcp->period_requests > bcp->congested_reps)) { - disable_for_congestion(bcp, stat); + + record_send_stats(time1, time2, bcp, stat, completion_stat, try); + + if (completion_stat == FLUSH_GIVEUP) + return 1; + return 0; +} + +/* + * The BAU is disabled. When the disabled time period has expired, the cpu + * that disabled it must re-enable it. + * Return 0 if it is re-enabled for all cpus. + */ +static int check_enable(struct bau_control *bcp, struct ptc_stats *stat) +{ + int tcpu; + struct bau_control *tbcp; + + if (bcp->set_bau_off) { + if (get_cycles() >= bcp->set_bau_on_time) { + stat->s_bau_reenabled++; + baudisabled = 0; + for_each_present_cpu(tcpu) { + tbcp = &per_cpu(bau_control, tcpu); + tbcp->baudisabled = 0; + tbcp->period_requests = 0; + tbcp->period_time = 0; } + return 0; } + } + return -1; +} + +static void record_send_statistics(struct ptc_stats *stat, int locals, int hubs, + int remotes, struct bau_desc *bau_desc) +{ + stat->s_requestor++; + stat->s_ntargcpu += remotes + locals; + stat->s_ntargremotes += remotes; + stat->s_ntarglocals += locals; + + /* uvhub statistics */ + hubs = bau_uvhub_weight(&bau_desc->distribution); + if (locals) { + stat->s_ntarglocaluvhub++; + stat->s_ntargremoteuvhub += (hubs - 1); } else - stat->s_requestor--; - if (completion_status == FLUSH_COMPLETE && try > 1) - stat->s_retriesok++; - else if (completion_status == FLUSH_GIVEUP) { - stat->s_giveup++; - return 1; + stat->s_ntargremoteuvhub += hubs; + + stat->s_ntarguvhub += hubs; + + if (hubs >= 16) + stat->s_ntarguvhub16++; + else if (hubs >= 8) + stat->s_ntarguvhub8++; + else if (hubs >= 4) + stat->s_ntarguvhub4++; + else if (hubs >= 2) + stat->s_ntarguvhub2++; + else + stat->s_ntarguvhub1++; +} + +/* + * Translate a cpu mask to the uvhub distribution mask in the BAU + * activation descriptor. + */ +static int set_distrib_bits(struct cpumask *flush_mask, struct bau_control *bcp, + struct bau_desc *bau_desc, int *localsp, int *remotesp) +{ + int cpu; + int pnode; + int cnt = 0; + struct hub_and_pnode *hpp; + + for_each_cpu(cpu, flush_mask) { + /* + * The distribution vector is a bit map of pnodes, relative + * to the partition base pnode (and the partition base nasid + * in the header). + * Translate cpu to pnode and hub using a local memory array. + */ + hpp = &bcp->socket_master->thp[cpu]; + pnode = hpp->pnode - bcp->partition_base_pnode; + bau_uvhub_set(pnode, &bau_desc->distribution); + cnt++; + if (hpp->uvhub == bcp->uvhub) + (*localsp)++; + else + (*remotesp)++; } + if (!cnt) + return 1; return 0; } -/** - * uv_flush_tlb_others - globally purge translation cache of a virtual - * address or all TLB's +/* + * globally purge translation cache of a virtual address or all TLB's * @cpumask: mask of all cpu's in which the address is to be removed * @mm: mm_struct containing virtual address range * @va: virtual address to be removed (or TLB_FLUSH_ALL for all TLB's on cpu) @@ -774,20 +925,16 @@ int uv_flush_send_and_wait(struct bau_desc *bau_desc, * done. The returned pointer is valid till preemption is re-enabled. */ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, - struct mm_struct *mm, - unsigned long va, unsigned int cpu) + struct mm_struct *mm, unsigned long va, + unsigned int cpu) { int locals = 0; int remotes = 0; int hubs = 0; - int tcpu; - int tpnode; struct bau_desc *bau_desc; struct cpumask *flush_mask; struct ptc_stats *stat; struct bau_control *bcp; - struct bau_control *tbcp; - struct hub_and_pnode *hpp; /* kernel was booted 'nobau' */ if (nobau) @@ -798,20 +945,8 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, /* bau was disabled due to slow response */ if (bcp->baudisabled) { - /* the cpu that disabled it must re-enable it */ - if (bcp->set_bau_off) { - if (get_cycles() >= bcp->set_bau_on_time) { - stat->s_bau_reenabled++; - baudisabled = 0; - for_each_present_cpu(tcpu) { - tbcp = &per_cpu(bau_control, tcpu); - tbcp->baudisabled = 0; - tbcp->period_requests = 0; - tbcp->period_time = 0; - } - } - } - return cpumask; + if (check_enable(bcp, stat)) + return cpumask; } /* @@ -822,59 +957,20 @@ const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, flush_mask = (struct cpumask *)per_cpu(uv_flush_tlb_mask, cpu); /* don't actually do a shootdown of the local cpu */ cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu)); + if (cpu_isset(cpu, *cpumask)) stat->s_ntargself++; bau_desc = bcp->descriptor_base; - bau_desc += UV_ITEMS_PER_DESCRIPTOR * bcp->uvhub_cpu; + bau_desc += ITEMS_PER_DESC * bcp->uvhub_cpu; bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE); - - for_each_cpu(tcpu, flush_mask) { - /* - * The distribution vector is a bit map of pnodes, relative - * to the partition base pnode (and the partition base nasid - * in the header). - * Translate cpu to pnode and hub using an array stored - * in local memory. - */ - hpp = &bcp->socket_master->target_hub_and_pnode[tcpu]; - tpnode = hpp->pnode - bcp->partition_base_pnode; - bau_uvhub_set(tpnode, &bau_desc->distribution); - if (hpp->uvhub == bcp->uvhub) - locals++; - else - remotes++; - } - if ((locals + remotes) == 0) + if (set_distrib_bits(flush_mask, bcp, bau_desc, &locals, &remotes)) return NULL; - stat->s_requestor++; - stat->s_ntargcpu += remotes + locals; - stat->s_ntargremotes += remotes; - stat->s_ntarglocals += locals; - remotes = bau_uvhub_weight(&bau_desc->distribution); - /* uvhub statistics */ - hubs = bau_uvhub_weight(&bau_desc->distribution); - if (locals) { - stat->s_ntarglocaluvhub++; - stat->s_ntargremoteuvhub += (hubs - 1); - } else - stat->s_ntargremoteuvhub += hubs; - stat->s_ntarguvhub += hubs; - if (hubs >= 16) - stat->s_ntarguvhub16++; - else if (hubs >= 8) - stat->s_ntarguvhub8++; - else if (hubs >= 4) - stat->s_ntarguvhub4++; - else if (hubs >= 2) - stat->s_ntarguvhub2++; - else - stat->s_ntarguvhub1++; + record_send_statistics(stat, locals, hubs, remotes, bau_desc); bau_desc->payload.address = va; bau_desc->payload.sending_cpu = cpu; - /* * uv_flush_send_and_wait returns 0 if all cpu's were messaged, * or 1 if it gave up and the original cpumask should be returned. @@ -903,26 +999,31 @@ void uv_bau_message_interrupt(struct pt_regs *regs) { int count = 0; cycles_t time_start; - struct bau_payload_queue_entry *msg; + struct bau_pq_entry *msg; struct bau_control *bcp; struct ptc_stats *stat; struct msg_desc msgdesc; time_start = get_cycles(); + bcp = &per_cpu(bau_control, smp_processor_id()); stat = bcp->statp; - msgdesc.va_queue_first = bcp->va_queue_first; - msgdesc.va_queue_last = bcp->va_queue_last; + + msgdesc.queue_first = bcp->queue_first; + msgdesc.queue_last = bcp->queue_last; + msg = bcp->bau_msg_head; - while (msg->sw_ack_vector) { + while (msg->swack_vec) { count++; - msgdesc.msg_slot = msg - msgdesc.va_queue_first; - msgdesc.sw_ack_slot = ffs(msg->sw_ack_vector) - 1; + + msgdesc.msg_slot = msg - msgdesc.queue_first; + msgdesc.swack_slot = ffs(msg->swack_vec) - 1; msgdesc.msg = msg; - uv_bau_process_message(&msgdesc, bcp); + bau_process_message(&msgdesc, bcp); + msg++; - if (msg > msgdesc.va_queue_last) - msg = msgdesc.va_queue_first; + if (msg > msgdesc.queue_last) + msg = msgdesc.queue_first; bcp->bau_msg_head = msg; } stat->d_time += (get_cycles() - time_start); @@ -930,18 +1031,17 @@ void uv_bau_message_interrupt(struct pt_regs *regs) stat->d_nomsg++; else if (count > 1) stat->d_multmsg++; + ack_APIC_irq(); } /* - * uv_enable_timeouts - * - * Each target uvhub (i.e. a uvhub that has no cpu's) needs to have + * Each target uvhub (i.e. a uvhub that has cpu's) needs to have * shootdown message timeouts enabled. The timeout does not cause * an interrupt, but causes an error message to be returned to * the sender. */ -static void __init uv_enable_timeouts(void) +static void __init enable_timeouts(void) { int uvhub; int nuvhubs; @@ -955,52 +1055,44 @@ static void __init uv_enable_timeouts(void) continue; pnode = uv_blade_to_pnode(uvhub); - mmr_image = - uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL); + mmr_image = read_mmr_misc_control(pnode); /* * Set the timeout period and then lock it in, in three * steps; captures and locks in the period. * * To program the period, the SOFT_ACK_MODE must be off. */ - mmr_image &= ~((unsigned long)1 << - UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT); - uv_write_global_mmr64 - (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + mmr_image &= ~(1L << SOFTACK_MSHIFT); + write_mmr_misc_control(pnode, mmr_image); /* * Set the 4-bit period. */ - mmr_image &= ~((unsigned long)0xf << - UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT); - mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD << - UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT); - uv_write_global_mmr64 - (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + mmr_image &= ~((unsigned long)0xf << SOFTACK_PSHIFT); + mmr_image |= (SOFTACK_TIMEOUT_PERIOD << SOFTACK_PSHIFT); + write_mmr_misc_control(pnode, mmr_image); /* * UV1: * Subsequent reversals of the timebase bit (3) cause an * immediate timeout of one or all INTD resources as * indicated in bits 2:0 (7 causes all of them to timeout). */ - mmr_image |= ((unsigned long)1 << - UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT); + mmr_image |= (1L << SOFTACK_MSHIFT); if (is_uv2_hub()) { - mmr_image |= ((unsigned long)1 << UV2_LEG_SHFT); - mmr_image |= ((unsigned long)1 << UV2_EXT_SHFT); + mmr_image |= (1L << UV2_LEG_SHFT); + mmr_image |= (1L << UV2_EXT_SHFT); } - uv_write_global_mmr64 - (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image); + write_mmr_misc_control(pnode, mmr_image); } } -static void *uv_ptc_seq_start(struct seq_file *file, loff_t *offset) +static void *ptc_seq_start(struct seq_file *file, loff_t *offset) { if (*offset < num_possible_cpus()) return offset; return NULL; } -static void *uv_ptc_seq_next(struct seq_file *file, void *data, loff_t *offset) +static void *ptc_seq_next(struct seq_file *file, void *data, loff_t *offset) { (*offset)++; if (*offset < num_possible_cpus()) @@ -1008,12 +1100,11 @@ static void *uv_ptc_seq_next(struct seq_file *file, void *data, loff_t *offset) return NULL; } -static void uv_ptc_seq_stop(struct seq_file *file, void *data) +static void ptc_seq_stop(struct seq_file *file, void *data) { } -static inline unsigned long long -microsec_2_cycles(unsigned long microsec) +static inline unsigned long long usec_2_cycles(unsigned long microsec) { unsigned long ns; unsigned long long cyc; @@ -1024,29 +1115,27 @@ microsec_2_cycles(unsigned long microsec) } /* - * Display the statistics thru /proc. + * Display the statistics thru /proc/sgi_uv/ptc_statistics * 'data' points to the cpu number + * Note: see the descriptions in stat_description[]. */ -static int uv_ptc_seq_show(struct seq_file *file, void *data) +static int ptc_seq_show(struct seq_file *file, void *data) { struct ptc_stats *stat; int cpu; cpu = *(loff_t *)data; - if (!cpu) { seq_printf(file, "# cpu sent stime self locals remotes ncpus localhub "); seq_printf(file, "remotehub numuvhubs numuvhubs16 numuvhubs8 "); seq_printf(file, - "numuvhubs4 numuvhubs2 numuvhubs1 dto "); + "numuvhubs4 numuvhubs2 numuvhubs1 dto retries rok "); seq_printf(file, - "retries rok resetp resett giveup sto bz throt "); + "resetp resett giveup sto bz throt swack recv rtime "); seq_printf(file, - "sw_ack recv rtime all "); - seq_printf(file, - "one mult none retry canc nocan reset rcan "); + "all one mult none retry canc nocan reset rcan "); seq_printf(file, "disable enable\n"); } @@ -1073,8 +1162,7 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data) /* destination side statistics */ seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ", - uv_read_global_mmr64(uv_cpu_to_pnode(cpu), - UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE), + read_gmmr_sw_ack(uv_cpu_to_pnode(cpu)), stat->d_requestee, cycles_2_us(stat->d_time), stat->d_alltlb, stat->d_onetlb, stat->d_multmsg, stat->d_nomsg, stat->d_retries, stat->d_canceled, @@ -1083,7 +1171,6 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data) seq_printf(file, "%ld %ld\n", stat->s_bau_disabled, stat->s_bau_reenabled); } - return 0; } @@ -1091,18 +1178,18 @@ static int uv_ptc_seq_show(struct seq_file *file, void *data) * Display the tunables thru debugfs */ static ssize_t tunables_read(struct file *file, char __user *userbuf, - size_t count, loff_t *ppos) + size_t count, loff_t *ppos) { char *buf; int ret; buf = kasprintf(GFP_KERNEL, "%s %s %s\n%d %d %d %d %d %d %d %d %d\n", - "max_bau_concurrent plugged_delay plugsb4reset", + "max_concur plugged_delay plugsb4reset", "timeoutsb4reset ipi_reset_limit complete_threshold", "congested_response_us congested_reps congested_period", - max_bau_concurrent, plugged_delay, plugsb4reset, + max_concurr, plugged_delay, plugsb4reset, timeoutsb4reset, ipi_reset_limit, complete_threshold, - congested_response_us, congested_reps, congested_period); + congested_respns_us, congested_reps, congested_period); if (!buf) return -ENOMEM; @@ -1113,13 +1200,16 @@ static ssize_t tunables_read(struct file *file, char __user *userbuf, } /* - * -1: resetf the statistics + * handle a write to /proc/sgi_uv/ptc_statistics + * -1: reset the statistics * 0: display meaning of the statistics */ -static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user, - size_t count, loff_t *data) +static ssize_t ptc_proc_write(struct file *file, const char __user *user, + size_t count, loff_t *data) { int cpu; + int i; + int elements; long input_arg; char optstr[64]; struct ptc_stats *stat; @@ -1129,79 +1219,18 @@ static ssize_t uv_ptc_proc_write(struct file *file, const char __user *user, if (copy_from_user(optstr, user, count)) return -EFAULT; optstr[count - 1] = '\0'; + if (strict_strtol(optstr, 10, &input_arg) < 0) { printk(KERN_DEBUG "%s is invalid\n", optstr); return -EINVAL; } if (input_arg == 0) { + elements = sizeof(stat_description)/sizeof(*stat_description); printk(KERN_DEBUG "# cpu: cpu number\n"); printk(KERN_DEBUG "Sender statistics:\n"); - printk(KERN_DEBUG - "sent: number of shootdown messages sent\n"); - printk(KERN_DEBUG - "stime: time spent sending messages\n"); - printk(KERN_DEBUG - "numuvhubs: number of hubs targeted with shootdown\n"); - printk(KERN_DEBUG - "numuvhubs16: number times 16 or more hubs targeted\n"); - printk(KERN_DEBUG - "numuvhubs8: number times 8 or more hubs targeted\n"); - printk(KERN_DEBUG - "numuvhubs4: number times 4 or more hubs targeted\n"); - printk(KERN_DEBUG - "numuvhubs2: number times 2 or more hubs targeted\n"); - printk(KERN_DEBUG - "numuvhubs1: number times 1 hub targeted\n"); - printk(KERN_DEBUG - "numcpus: number of cpus targeted with shootdown\n"); - printk(KERN_DEBUG - "dto: number of destination timeouts\n"); - printk(KERN_DEBUG - "retries: destination timeout retries sent\n"); - printk(KERN_DEBUG - "rok: : destination timeouts successfully retried\n"); - printk(KERN_DEBUG - "resetp: ipi-style resource resets for plugs\n"); - printk(KERN_DEBUG - "resett: ipi-style resource resets for timeouts\n"); - printk(KERN_DEBUG - "giveup: fall-backs to ipi-style shootdowns\n"); - printk(KERN_DEBUG - "sto: number of source timeouts\n"); - printk(KERN_DEBUG - "bz: number of stay-busy's\n"); - printk(KERN_DEBUG - "throt: number times spun in throttle\n"); - printk(KERN_DEBUG "Destination side statistics:\n"); - printk(KERN_DEBUG - "sw_ack: image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE\n"); - printk(KERN_DEBUG - "recv: shootdown messages received\n"); - printk(KERN_DEBUG - "rtime: time spent processing messages\n"); - printk(KERN_DEBUG - "all: shootdown all-tlb messages\n"); - printk(KERN_DEBUG - "one: shootdown one-tlb messages\n"); - printk(KERN_DEBUG - "mult: interrupts that found multiple messages\n"); - printk(KERN_DEBUG - "none: interrupts that found no messages\n"); - printk(KERN_DEBUG - "retry: number of retry messages processed\n"); - printk(KERN_DEBUG - "canc: number messages canceled by retries\n"); - printk(KERN_DEBUG - "nocan: number retries that found nothing to cancel\n"); - printk(KERN_DEBUG - "reset: number of ipi-style reset requests processed\n"); - printk(KERN_DEBUG - "rcan: number messages canceled by reset requests\n"); - printk(KERN_DEBUG - "disable: number times use of the BAU was disabled\n"); - printk(KERN_DEBUG - "enable: number times use of the BAU was re-enabled\n"); + for (i = 0; i < elements; i++) + printk(KERN_DEBUG "%s\n", stat_description[i]); } else if (input_arg == -1) { for_each_present_cpu(cpu) { stat = &per_cpu(ptcstats, cpu); @@ -1228,27 +1257,18 @@ static int local_atoi(const char *name) } /* - * set the tunables - * 0 values reset them to defaults + * Parse the values written to /sys/kernel/debug/sgi_uv/bau_tunables. + * Zero values reset them to defaults. */ -static ssize_t tunables_write(struct file *file, const char __user *user, - size_t count, loff_t *data) +static int parse_tunables_write(struct bau_control *bcp, char *instr, + int count) { - int cpu; - int cnt = 0; - int val; char *p; char *q; - char instr[64]; - struct bau_control *bcp; - - if (count == 0 || count > sizeof(instr)-1) - return -EINVAL; - if (copy_from_user(instr, user, count)) - return -EFAULT; + int cnt = 0; + int val; + int e = sizeof(tunables) / sizeof(*tunables); - instr[count] = '\0'; - /* count the fields */ p = instr + strspn(instr, WHITESPACE); q = p; for (; *p; p = q + strspn(q, WHITESPACE)) { @@ -1257,8 +1277,8 @@ static ssize_t tunables_write(struct file *file, const char __user *user, if (q == p) break; } - if (cnt != 9) { - printk(KERN_INFO "bau tunable error: should be 9 numbers\n"); + if (cnt != e) { + printk(KERN_INFO "bau tunable error: should be %d values\n", e); return -EINVAL; } @@ -1270,97 +1290,80 @@ static ssize_t tunables_write(struct file *file, const char __user *user, switch (cnt) { case 0: if (val == 0) { - max_bau_concurrent = MAX_BAU_CONCURRENT; - max_bau_concurrent_constant = - MAX_BAU_CONCURRENT; + max_concurr = MAX_BAU_CONCURRENT; + max_concurr_const = MAX_BAU_CONCURRENT; continue; } - bcp = &per_cpu(bau_control, smp_processor_id()); if (val < 1 || val > bcp->cpus_in_uvhub) { printk(KERN_DEBUG "Error: BAU max concurrent %d is invalid\n", val); return -EINVAL; } - max_bau_concurrent = val; - max_bau_concurrent_constant = val; - continue; - case 1: - if (val == 0) - plugged_delay = PLUGGED_DELAY; - else - plugged_delay = val; + max_concurr = val; + max_concurr_const = val; continue; - case 2: - if (val == 0) - plugsb4reset = PLUGSB4RESET; - else - plugsb4reset = val; - continue; - case 3: - if (val == 0) - timeoutsb4reset = TIMEOUTSB4RESET; - else - timeoutsb4reset = val; - continue; - case 4: - if (val == 0) - ipi_reset_limit = IPI_RESET_LIMIT; - else - ipi_reset_limit = val; - continue; - case 5: - if (val == 0) - complete_threshold = COMPLETE_THRESHOLD; - else - complete_threshold = val; - continue; - case 6: - if (val == 0) - congested_response_us = CONGESTED_RESPONSE_US; - else - congested_response_us = val; - continue; - case 7: - if (val == 0) - congested_reps = CONGESTED_REPS; - else - congested_reps = val; - continue; - case 8: + default: if (val == 0) - congested_period = CONGESTED_PERIOD; + *tunables[cnt].tunp = tunables[cnt].deflt; else - congested_period = val; + *tunables[cnt].tunp = val; continue; } if (q == p) break; } + return 0; +} + +/* + * Handle a write to debugfs. (/sys/kernel/debug/sgi_uv/bau_tunables) + */ +static ssize_t tunables_write(struct file *file, const char __user *user, + size_t count, loff_t *data) +{ + int cpu; + int ret; + char instr[100]; + struct bau_control *bcp; + + if (count == 0 || count > sizeof(instr)-1) + return -EINVAL; + if (copy_from_user(instr, user, count)) + return -EFAULT; + + instr[count] = '\0'; + + bcp = &per_cpu(bau_control, smp_processor_id()); + + ret = parse_tunables_write(bcp, instr, count); + if (ret) + return ret; + for_each_present_cpu(cpu) { bcp = &per_cpu(bau_control, cpu); - bcp->max_bau_concurrent = max_bau_concurrent; - bcp->max_bau_concurrent_constant = max_bau_concurrent; - bcp->plugged_delay = plugged_delay; - bcp->plugsb4reset = plugsb4reset; - bcp->timeoutsb4reset = timeoutsb4reset; - bcp->ipi_reset_limit = ipi_reset_limit; - bcp->complete_threshold = complete_threshold; - bcp->congested_response_us = congested_response_us; - bcp->congested_reps = congested_reps; - bcp->congested_period = congested_period; + bcp->max_concurr = max_concurr; + bcp->max_concurr_const = max_concurr; + bcp->plugged_delay = plugged_delay; + bcp->plugsb4reset = plugsb4reset; + bcp->timeoutsb4reset = timeoutsb4reset; + bcp->ipi_reset_limit = ipi_reset_limit; + bcp->complete_threshold = complete_threshold; + bcp->cong_response_us = congested_respns_us; + bcp->cong_reps = congested_reps; + bcp->cong_period = congested_period; } return count; } static const struct seq_operations uv_ptc_seq_ops = { - .start = uv_ptc_seq_start, - .next = uv_ptc_seq_next, - .stop = uv_ptc_seq_stop, - .show = uv_ptc_seq_show + .start = ptc_seq_start, + .next = ptc_seq_next, + .stop = ptc_seq_stop, + .show = ptc_seq_show }; -static int uv_ptc_proc_open(struct inode *inode, struct file *file) +static int ptc_proc_open(struct inode *inode, struct file *file) { return seq_open(file, &uv_ptc_seq_ops); } @@ -1371,9 +1374,9 @@ static int tunables_open(struct inode *inode, struct file *file) } static const struct file_operations proc_uv_ptc_operations = { - .open = uv_ptc_proc_open, + .open = ptc_proc_open, .read = seq_read, - .write = uv_ptc_proc_write, + .write = ptc_proc_write, .llseek = seq_lseek, .release = seq_release, }; @@ -1407,7 +1410,7 @@ static int __init uv_ptc_init(void) return -EINVAL; } tunables_file = debugfs_create_file(UV_BAU_TUNABLES_FILE, 0600, - tunables_dir, NULL, &tunables_fops); + tunables_dir, NULL, &tunables_fops); if (!tunables_file) { printk(KERN_ERR "unable to create debugfs file %s\n", UV_BAU_TUNABLES_FILE); @@ -1419,24 +1422,24 @@ static int __init uv_ptc_init(void) /* * Initialize the sending side's sending buffers. */ -static void -uv_activation_descriptor_init(int node, int pnode, int base_pnode) +static void activation_descriptor_init(int node, int pnode, int base_pnode) { int i; int cpu; unsigned long pa; unsigned long m; unsigned long n; + size_t dsize; struct bau_desc *bau_desc; struct bau_desc *bd2; struct bau_control *bcp; /* - * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR) - * per cpu; and one per cpu on the uvhub (UV_ADP_SIZE) + * each bau_desc is 64 bytes; there are 8 (ITEMS_PER_DESC) + * per cpu; and one per cpu on the uvhub (ADP_SZ) */ - bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE - * UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node); + dsize = sizeof(struct bau_desc) * ADP_SZ * ITEMS_PER_DESC; + bau_desc = kmalloc_node(dsize, GFP_KERNEL, node); BUG_ON(!bau_desc); pa = uv_gpa(bau_desc); /* need the real nasid*/ @@ -1444,27 +1447,25 @@ uv_activation_descriptor_init(int node, int pnode, int base_pnode) m = pa & uv_mmask; /* the 14-bit pnode */ - uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, - (n << UV_DESC_BASE_PNODE_SHIFT | m)); + write_mmr_descriptor_base(pnode, (n << UV_DESC_PSHIFT | m)); /* - * Initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each + * Initializing all 8 (ITEMS_PER_DESC) descriptors for each * cpu even though we only use the first one; one descriptor can * describe a broadcast to 256 uv hubs. */ - for (i = 0, bd2 = bau_desc; i < (UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR); - i++, bd2++) { + for (i = 0, bd2 = bau_desc; i < (ADP_SZ * ITEMS_PER_DESC); i++, bd2++) { memset(bd2, 0, sizeof(struct bau_desc)); - bd2->header.sw_ack_flag = 1; + bd2->header.swack_flag = 1; /* * The base_dest_nasid set in the message header is the nasid * of the first uvhub in the partition. The bit map will * indicate destination pnode numbers relative to that base. * They may not be consecutive if nasid striding is being used. */ - bd2->header.base_dest_nasid = UV_PNODE_TO_NASID(base_pnode); - bd2->header.dest_subnodeid = UV_LB_SUBNODEID; - bd2->header.command = UV_NET_ENDPOINT_INTD; - bd2->header.int_both = 1; + bd2->header.base_dest_nasid = UV_PNODE_TO_NASID(base_pnode); + bd2->header.dest_subnodeid = UV_LB_SUBNODEID; + bd2->header.command = UV_NET_ENDPOINT_INTD; + bd2->header.int_both = 1; /* * all others need to be set to zero: * fairness chaining multilevel count replied_to @@ -1484,57 +1485,55 @@ uv_activation_descriptor_init(int node, int pnode, int base_pnode) * - node is first node (kernel memory notion) on the uvhub * - pnode is the uvhub's physical identifier */ -static void -uv_payload_queue_init(int node, int pnode) +static void pq_init(int node, int pnode) { - int pn; int cpu; + size_t plsize; char *cp; - unsigned long pa; - struct bau_payload_queue_entry *pqp; - struct bau_payload_queue_entry *pqp_malloc; + void *vp; + unsigned long pn; + unsigned long first; + unsigned long pn_first; + unsigned long last; + struct bau_pq_entry *pqp; struct bau_control *bcp; - pqp = kmalloc_node((DEST_Q_SIZE + 1) - * sizeof(struct bau_payload_queue_entry), - GFP_KERNEL, node); + plsize = (DEST_Q_SIZE + 1) * sizeof(struct bau_pq_entry); + vp = kmalloc_node(plsize, GFP_KERNEL, node); + pqp = (struct bau_pq_entry *)vp; BUG_ON(!pqp); - pqp_malloc = pqp; cp = (char *)pqp + 31; - pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5); + pqp = (struct bau_pq_entry *)(((unsigned long)cp >> 5) << 5); for_each_present_cpu(cpu) { if (pnode != uv_cpu_to_pnode(cpu)) continue; /* for every cpu on this pnode: */ bcp = &per_cpu(bau_control, cpu); - bcp->va_queue_first = pqp; - bcp->bau_msg_head = pqp; - bcp->va_queue_last = pqp + (DEST_Q_SIZE - 1); + bcp->queue_first = pqp; + bcp->bau_msg_head = pqp; + bcp->queue_last = pqp + (DEST_Q_SIZE - 1); } /* * need the pnode of where the memory was really allocated */ - pa = uv_gpa(pqp); - pn = pa >> uv_nshift; - uv_write_global_mmr64(pnode, - UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, - ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | - uv_physnodeaddr(pqp)); - uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, - uv_physnodeaddr(pqp)); - uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST, - (unsigned long) - uv_physnodeaddr(pqp + (DEST_Q_SIZE - 1))); + pn = uv_gpa(pqp) >> uv_nshift; + first = uv_physnodeaddr(pqp); + pn_first = ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) | first; + last = uv_physnodeaddr(pqp + (DEST_Q_SIZE - 1)); + write_mmr_payload_first(pnode, pn_first); + write_mmr_payload_tail(pnode, first); + write_mmr_payload_last(pnode, last); + /* in effect, all msg_type's are set to MSG_NOOP */ - memset(pqp, 0, sizeof(struct bau_payload_queue_entry) * DEST_Q_SIZE); + memset(pqp, 0, sizeof(struct bau_pq_entry) * DEST_Q_SIZE); } /* * Initialization of each UV hub's structures */ -static void __init uv_init_uvhub(int uvhub, int vector, int base_pnode) +static void __init init_uvhub(int uvhub, int vector, int base_pnode) { int node; int pnode; @@ -1542,24 +1541,24 @@ static void __init uv_init_uvhub(int uvhub, int vector, int base_pnode) node = uvhub_to_first_node(uvhub); pnode = uv_blade_to_pnode(uvhub); - uv_activation_descriptor_init(node, pnode, base_pnode); - uv_payload_queue_init(node, pnode); + + activation_descriptor_init(node, pnode, base_pnode); + + pq_init(node, pnode); /* * The below initialization can't be in firmware because the * messaging IRQ will be determined by the OS. */ apicid = uvhub_to_first_apicid(uvhub) | uv_apicid_hibits; - uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, - ((apicid << 32) | vector)); + write_mmr_data_config(pnode, ((apicid << 32) | vector)); } /* * We will set BAU_MISC_CONTROL with a timeout period. * But the BIOS has set UVH_AGING_PRESCALE_SEL and UVH_TRANSACTION_TIMEOUT. - * So the destination timeout period has be be calculated from them. + * So the destination timeout period has to be calculated from them. */ -static int -calculate_destination_timeout(void) +static int calculate_destination_timeout(void) { unsigned long mmr_image; int mult1; @@ -1570,8 +1569,7 @@ calculate_destination_timeout(void) unsigned long ts_ns; if (is_uv1_hub()) { - mult1 = UV1_INTD_SOFT_ACK_TIMEOUT_PERIOD & - BAU_MISC_CONTROL_MULT_MASK; + mult1 = SOFTACK_TIMEOUT_PERIOD & BAU_MISC_CONTROL_MULT_MASK; mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL); index = (mmr_image >> BAU_URGENCY_7_SHIFT) & BAU_URGENCY_7_MASK; mmr_image = uv_read_local_mmr(UVH_TRANSACTION_TIMEOUT); @@ -1583,7 +1581,7 @@ calculate_destination_timeout(void) /* 4 bits 0/1 for 10/80us, 3 bits of multiplier */ mmr_image = uv_read_local_mmr(UVH_AGING_PRESCALE_SEL); mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT; - if (mmr_image & ((unsigned long)1 << UV2_ACK_UNITS_SHFT)) + if (mmr_image & (1L << UV2_ACK_UNITS_SHFT)) mult1 = 80; else mult1 = 10; @@ -1593,62 +1591,69 @@ calculate_destination_timeout(void) return ret; } +static void __init init_per_cpu_tunables(void) +{ + int cpu; + struct bau_control *bcp; + + for_each_present_cpu(cpu) { + bcp = &per_cpu(bau_control, cpu); + bcp->baudisabled = 0; + bcp->statp = &per_cpu(ptcstats, cpu); + /* time interval to catch a hardware stay-busy bug */ + bcp->timeout_interval = usec_2_cycles(2*timeout_us); + bcp->max_concurr = max_concurr; + bcp->max_concurr_const = max_concurr; + bcp->plugged_delay = plugged_delay; + bcp->plugsb4reset = plugsb4reset; + bcp->timeoutsb4reset = timeoutsb4reset; + bcp->ipi_reset_limit = ipi_reset_limit; + bcp->complete_threshold = complete_threshold; + bcp->cong_response_us = congested_respns_us; + bcp->cong_reps = congested_reps; + bcp->cong_period = congested_period; + } +} + /* - * initialize the bau_control structure for each cpu + * Scan all cpus to collect blade and socket summaries. */ -static int __init uv_init_per_cpu(int nuvhubs, int base_part_pnode) +static int __init get_cpu_topology(int base_pnode, + struct uvhub_desc *uvhub_descs, + unsigned char *uvhub_mask) { - int i; int cpu; - int tcpu; int pnode; int uvhub; - int have_hmaster; - short socket = 0; - unsigned short socket_mask; - unsigned char *uvhub_mask; + int socket; struct bau_control *bcp; struct uvhub_desc *bdp; struct socket_desc *sdp; - struct bau_control *hmaster = NULL; - struct bau_control *smaster = NULL; - struct socket_desc { - short num_cpus; - short cpu_number[MAX_CPUS_PER_SOCKET]; - }; - struct uvhub_desc { - unsigned short socket_mask; - short num_cpus; - short uvhub; - short pnode; - struct socket_desc socket[2]; - }; - struct uvhub_desc *uvhub_descs; - timeout_us = calculate_destination_timeout(); - - uvhub_descs = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL); - memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc)); - uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL); for_each_present_cpu(cpu) { bcp = &per_cpu(bau_control, cpu); + memset(bcp, 0, sizeof(struct bau_control)); + pnode = uv_cpu_hub_info(cpu)->pnode; - if ((pnode - base_part_pnode) >= UV_DISTRIBUTION_SIZE) { + if ((pnode - base_pnode) >= UV_DISTRIBUTION_SIZE) { printk(KERN_EMERG "cpu %d pnode %d-%d beyond %d; BAU disabled\n", - cpu, pnode, base_part_pnode, - UV_DISTRIBUTION_SIZE); + cpu, pnode, base_pnode, UV_DISTRIBUTION_SIZE); return 1; } + bcp->osnode = cpu_to_node(cpu); - bcp->partition_base_pnode = uv_partition_base_pnode; + bcp->partition_base_pnode = base_pnode; + uvhub = uv_cpu_hub_info(cpu)->numa_blade_id; *(uvhub_mask + (uvhub/8)) |= (1 << (uvhub%8)); bdp = &uvhub_descs[uvhub]; + bdp->num_cpus++; bdp->uvhub = uvhub; bdp->pnode = pnode; + /* kludge: 'assuming' one node per socket, and assuming that disabling a socket just leaves a gap in node numbers */ socket = bcp->osnode & 1; @@ -1657,84 +1662,129 @@ static int __init uv_init_per_cpu(int nuvhubs, int base_part_pnode) sdp->cpu_number[sdp->num_cpus] = cpu; sdp->num_cpus++; if (sdp->num_cpus > MAX_CPUS_PER_SOCKET) { - printk(KERN_EMERG "%d cpus per socket invalid\n", sdp->num_cpus); + printk(KERN_EMERG "%d cpus per socket invalid\n", + sdp->num_cpus); return 1; } } + return 0; +} + +/* + * Each socket is to get a local array of pnodes/hubs. + */ +static void make_per_cpu_thp(struct bau_control *smaster) +{ + int cpu; + size_t hpsz = sizeof(struct hub_and_pnode) * num_possible_cpus(); + + smaster->thp = kmalloc_node(hpsz, GFP_KERNEL, smaster->osnode); + memset(smaster->thp, 0, hpsz); + for_each_present_cpu(cpu) { + smaster->thp[cpu].pnode = uv_cpu_hub_info(cpu)->pnode; + smaster->thp[cpu].uvhub = uv_cpu_hub_info(cpu)->numa_blade_id; + } +} + +/* + * Initialize all the per_cpu information for the cpu's on a given socket, + * given what has been gathered into the socket_desc struct. + * And reports the chosen hub and socket masters back to the caller. + */ +static int scan_sock(struct socket_desc *sdp, struct uvhub_desc *bdp, + struct bau_control **smasterp, + struct bau_control **hmasterp) +{ + int i; + int cpu; + struct bau_control *bcp; + + for (i = 0; i < sdp->num_cpus; i++) { + cpu = sdp->cpu_number[i]; + bcp = &per_cpu(bau_control, cpu); + bcp->cpu = cpu; + if (i == 0) { + *smasterp = bcp; + if (!(*hmasterp)) + *hmasterp = bcp; + } + bcp->cpus_in_uvhub = bdp->num_cpus; + bcp->cpus_in_socket = sdp->num_cpus; + bcp->socket_master = *smasterp; + bcp->uvhub = bdp->uvhub; + bcp->uvhub_master = *hmasterp; + bcp->uvhub_cpu = uv_cpu_hub_info(cpu)->blade_processor_id; + if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) { + printk(KERN_EMERG "%d cpus per uvhub invalid\n", + bcp->uvhub_cpu); + return 1; + } + } + return 0; +} + +/* + * Summarize the blade and socket topology into the per_cpu structures. + */ +static int __init summarize_uvhub_sockets(int nuvhubs, + struct uvhub_desc *uvhub_descs, + unsigned char *uvhub_mask) +{ + int socket; + int uvhub; + unsigned short socket_mask; + for (uvhub = 0; uvhub < nuvhubs; uvhub++) { + struct uvhub_desc *bdp; + struct bau_control *smaster = NULL; + struct bau_control *hmaster = NULL; + if (!(*(uvhub_mask + (uvhub/8)) & (1 << (uvhub%8)))) continue; - have_hmaster = 0; + bdp = &uvhub_descs[uvhub]; socket_mask = bdp->socket_mask; socket = 0; while (socket_mask) { - if (!(socket_mask & 1)) - goto nextsocket; - sdp = &bdp->socket[socket]; - for (i = 0; i < sdp->num_cpus; i++) { - cpu = sdp->cpu_number[i]; - bcp = &per_cpu(bau_control, cpu); - bcp->cpu = cpu; - if (i == 0) { - smaster = bcp; - if (!have_hmaster) { - have_hmaster++; - hmaster = bcp; - } - } - bcp->cpus_in_uvhub = bdp->num_cpus; - bcp->cpus_in_socket = sdp->num_cpus; - bcp->socket_master = smaster; - bcp->uvhub = bdp->uvhub; - bcp->uvhub_master = hmaster; - bcp->uvhub_cpu = uv_cpu_hub_info(cpu)-> - blade_processor_id; - if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) { - printk(KERN_EMERG - "%d cpus per uvhub invalid\n", - bcp->uvhub_cpu); + struct socket_desc *sdp; + if ((socket_mask & 1)) { + sdp = &bdp->socket[socket]; + if (scan_sock(sdp, bdp, &smaster, &hmaster)) return 1; - } } -nextsocket: socket++; socket_mask = (socket_mask >> 1); - /* each socket gets a local array of pnodes/hubs */ - bcp = smaster; - bcp->target_hub_and_pnode = kmalloc_node( - sizeof(struct hub_and_pnode) * - num_possible_cpus(), GFP_KERNEL, bcp->osnode); - memset(bcp->target_hub_and_pnode, 0, - sizeof(struct hub_and_pnode) * - num_possible_cpus()); - for_each_present_cpu(tcpu) { - bcp->target_hub_and_pnode[tcpu].pnode = - uv_cpu_hub_info(tcpu)->pnode; - bcp->target_hub_and_pnode[tcpu].uvhub = - uv_cpu_hub_info(tcpu)->numa_blade_id; - } + make_per_cpu_thp(smaster); } } + return 0; +} + +/* + * initialize the bau_control structure for each cpu + */ +static int __init init_per_cpu(int nuvhubs, int base_part_pnode) +{ + unsigned char *uvhub_mask; + void *vp; + struct uvhub_desc *uvhub_descs; + + timeout_us = calculate_destination_timeout(); + + vp = kmalloc(nuvhubs * sizeof(struct uvhub_desc), GFP_KERNEL); + uvhub_descs = (struct uvhub_desc *)vp; + memset(uvhub_descs, 0, nuvhubs * sizeof(struct uvhub_desc)); + uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL); + + if (get_cpu_topology(base_part_pnode, uvhub_descs, uvhub_mask)) + return 1; + + if (summarize_uvhub_sockets(nuvhubs, uvhub_descs, uvhub_mask)) + return 1; + kfree(uvhub_descs); kfree(uvhub_mask); - for_each_present_cpu(cpu) { - bcp = &per_cpu(bau_control, cpu); - bcp->baudisabled = 0; - bcp->statp = &per_cpu(ptcstats, cpu); - /* time interval to catch a hardware stay-busy bug */ - bcp->timeout_interval = microsec_2_cycles(2*timeout_us); - bcp->max_bau_concurrent = max_bau_concurrent; - bcp->max_bau_concurrent_constant = max_bau_concurrent; - bcp->plugged_delay = plugged_delay; - bcp->plugsb4reset = plugsb4reset; - bcp->timeoutsb4reset = timeoutsb4reset; - bcp->ipi_reset_limit = ipi_reset_limit; - bcp->complete_threshold = complete_threshold; - bcp->congested_response_us = congested_response_us; - bcp->congested_reps = congested_reps; - bcp->congested_period = congested_period; - } + init_per_cpu_tunables(); return 0; } @@ -1747,8 +1797,9 @@ static int __init uv_bau_init(void) int pnode; int nuvhubs; int cur_cpu; + int cpus; int vector; - unsigned long mmr; + cpumask_var_t *mask; if (!is_uv_system()) return 0; @@ -1756,24 +1807,25 @@ static int __init uv_bau_init(void) if (nobau) return 0; - for_each_possible_cpu(cur_cpu) - zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu), - GFP_KERNEL, cpu_to_node(cur_cpu)); + for_each_possible_cpu(cur_cpu) { + mask = &per_cpu(uv_flush_tlb_mask, cur_cpu); + zalloc_cpumask_var_node(mask, GFP_KERNEL, cpu_to_node(cur_cpu)); + } uv_nshift = uv_hub_info->m_val; uv_mmask = (1UL << uv_hub_info->m_val) - 1; nuvhubs = uv_num_possible_blades(); spin_lock_init(&disable_lock); - congested_cycles = microsec_2_cycles(congested_response_us); + congested_cycles = usec_2_cycles(congested_respns_us); - uv_partition_base_pnode = 0x7fffffff; + uv_base_pnode = 0x7fffffff; for (uvhub = 0; uvhub < nuvhubs; uvhub++) { - if (uv_blade_nr_possible_cpus(uvhub) && - (uv_blade_to_pnode(uvhub) < uv_partition_base_pnode)) - uv_partition_base_pnode = uv_blade_to_pnode(uvhub); + cpus = uv_blade_nr_possible_cpus(uvhub); + if (cpus && (uv_blade_to_pnode(uvhub) < uv_base_pnode)) + uv_base_pnode = uv_blade_to_pnode(uvhub); } - if (uv_init_per_cpu(nuvhubs, uv_partition_base_pnode)) { + if (init_per_cpu(nuvhubs, uv_base_pnode)) { nobau = 1; return 0; } @@ -1781,21 +1833,21 @@ static int __init uv_bau_init(void) vector = UV_BAU_MESSAGE; for_each_possible_blade(uvhub) if (uv_blade_nr_possible_cpus(uvhub)) - uv_init_uvhub(uvhub, vector, uv_partition_base_pnode); + init_uvhub(uvhub, vector, uv_base_pnode); - uv_enable_timeouts(); + enable_timeouts(); alloc_intr_gate(vector, uv_bau_message_intr1); for_each_possible_blade(uvhub) { if (uv_blade_nr_possible_cpus(uvhub)) { + unsigned long val; + unsigned long mmr; pnode = uv_blade_to_pnode(uvhub); /* INIT the bau */ - uv_write_global_mmr64(pnode, - UVH_LB_BAU_SB_ACTIVATION_CONTROL, - ((unsigned long)1 << 63)); + val = 1L << 63; + write_gmmr_activation(pnode, val); mmr = 1; /* should be 1 to broadcast to both sockets */ - uv_write_global_mmr64(pnode, UVH_BAU_DATA_BROADCAST, - mmr); + write_mmr_data_broadcast(pnode, mmr); } } -- cgit v1.2.3 From aecb7b64dd9e2512c7a4c7e61dd781415d3dac5a Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Tue, 24 May 2011 14:04:09 +0530 Subject: dmaengine/dw_dmac: Update maintainer-ship Nobody is currently maintaining dw_dmac. We are using dw_dmac for SPEAr13xx and are currently maintaining it. After discussing with Vinod, sending this patch to update maintainer-ship of dw_dmac. Signed-off-by: Viresh Kumar Acked-by: Havard Skinnemoen Signed-off-by: Vinod Koul --- MAINTAINERS | 7 +++++++ drivers/dma/dw_dmac.c | 2 ++ drivers/dma/dw_dmac_regs.h | 1 + include/linux/dw_dmac.h | 1 + 4 files changed, 11 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 6b4b9cdec370..8f4413014b2d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5401,6 +5401,13 @@ L: linux-serial@vger.kernel.org S: Maintained F: drivers/tty/serial +SYNOPSYS DESIGNWARE DMAC DRIVER +M: Viresh Kumar +S: Maintained +F: include/linux/dw_dmac.h +F: drivers/dma/dw_dmac_regs.h +F: drivers/dma/dw_dmac.c + TIMEKEEPING, NTP M: John Stultz M: Thomas Gleixner diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c index eec675bf4f95..efd836dfb65a 100644 --- a/drivers/dma/dw_dmac.c +++ b/drivers/dma/dw_dmac.c @@ -3,6 +3,7 @@ * AVR32 systems.) * * Copyright (C) 2007-2008 Atmel Corporation + * Copyright (C) 2010-2011 ST Microelectronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -1575,3 +1576,4 @@ module_exit(dw_exit); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver"); MODULE_AUTHOR("Haavard Skinnemoen "); +MODULE_AUTHOR("Viresh Kumar "); diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h index c968597c32ab..c3419518d701 100644 --- a/drivers/dma/dw_dmac_regs.h +++ b/drivers/dma/dw_dmac_regs.h @@ -2,6 +2,7 @@ * Driver for the Synopsys DesignWare AHB DMA Controller * * Copyright (C) 2005-2007 Atmel Corporation + * Copyright (C) 2010-2011 ST Microelectronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h index 6998d9376ef9..4bfe0a2f7d50 100644 --- a/include/linux/dw_dmac.h +++ b/include/linux/dw_dmac.h @@ -3,6 +3,7 @@ * AVR32 systems.) * * Copyright (C) 2007 Atmel Corporation + * Copyright (C) 2010-2011 ST Microelectronics * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as -- cgit v1.2.3 From af6a25f0e1ec0265c267e6ee4513925eaba6d0ed Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Tue, 24 May 2011 14:49:59 +0100 Subject: x86: Reorder mm_context_t to remove x86_64 alignment padding and thus shrink mm_struct Reorder mm_context_t to remove alignment padding on 64 bit builds shrinking its size from 64 to 56 bytes. This allows mm_struct to shrink from 840 to 832 bytes, so using one fewer cache lines, and getting more objects per slab when using slub. slabinfo mm_struct reports before :- Sizes (bytes) Slabs ----------------------------------- Object : 840 Total : 7 SlabObj: 896 Full : 1 SlabSiz: 16384 Partial: 4 Loss : 56 CpuSlab: 2 Align : 64 Objects: 18 after :- Sizes (bytes) Slabs ---------------------------------- Object : 832 Total : 7 SlabObj: 832 Full : 1 SlabSiz: 16384 Partial: 4 Loss : 0 CpuSlab: 2 Align : 64 Objects: 19 Signed-off-by: Richard Kennedy Cc: wilsons@start.ca Cc: Linus Torvalds Cc: Andrew Morton Cc: Pekka Enberg Link: http://lkml.kernel.org/r/1306244999.1999.5.camel@castor.rsk Signed-off-by: Ingo Molnar --- arch/x86/include/asm/mmu.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/mmu.h b/arch/x86/include/asm/mmu.h index aeff3e89b222..5f55e6962769 100644 --- a/arch/x86/include/asm/mmu.h +++ b/arch/x86/include/asm/mmu.h @@ -11,14 +11,14 @@ typedef struct { void *ldt; int size; - struct mutex lock; - void *vdso; #ifdef CONFIG_X86_64 /* True if mm supports a task running in 32 bit compatibility mode. */ unsigned short ia32_compat; #endif + struct mutex lock; + void *vdso; } mm_context_t; #ifdef CONFIG_SMP -- cgit v1.2.3 From 76b2ab76a4492f8f43c511857181f8421901ce3f Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 14 Apr 2011 00:34:03 +0800 Subject: at91: remove MTD_NAND_ATMEL_BUSWIDTH_16 option no board configure it as 'n' and it's an issue to merge all defconfigs in one On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). so will pass it via system_rev Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Cc: Patrice Vilchez --- arch/arm/mach-at91/Kconfig | 19 ------------------- arch/arm/mach-at91/board-at572d940hf_ek.c | 7 ++----- arch/arm/mach-at91/board-cap9adk.c | 7 ++----- arch/arm/mach-at91/board-sam9260ek.c | 7 ++----- arch/arm/mach-at91/board-sam9261ek.c | 7 ++----- arch/arm/mach-at91/board-sam9263ek.c | 7 ++----- arch/arm/mach-at91/board-sam9g20ek.c | 7 ++----- arch/arm/mach-at91/board-sam9m10g45ek.c | 7 ++----- arch/arm/mach-at91/include/mach/system_rev.h | 25 +++++++++++++++++++++++++ 9 files changed, 39 insertions(+), 54 deletions(-) create mode 100644 arch/arm/mach-at91/include/mach/system_rev.h diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2d299bf5d72f..8cbc3aae6c64 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -3,9 +3,6 @@ if ARCH_AT91 config HAVE_AT91_DATAFLASH_CARD bool -config HAVE_NAND_ATMEL_BUSWIDTH_16 - bool - config HAVE_AT91_USART3 bool @@ -209,7 +206,6 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit @@ -270,7 +266,6 @@ comment "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. @@ -286,7 +281,6 @@ comment "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. @@ -302,7 +296,6 @@ comment "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. @@ -343,7 +336,6 @@ comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. @@ -351,7 +343,6 @@ config MACH_AT91SAM9G20EK config MACH_AT91SAM9G20EK_2MMC depends on MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and @@ -416,7 +407,6 @@ comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. "ES" at the end of the name means that this board is an @@ -433,7 +423,6 @@ comment "AT91CAP9 Board Type" config MACH_AT91CAP9ADK bool "Atmel AT91CAP9A-DK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. @@ -450,7 +439,6 @@ config MACH_AT572D940HFEB bool "AT572D940HF-EK" depends on ARCH_AT572D940HF select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT572D940HF-EK evaluation kit. @@ -483,13 +471,6 @@ config MTD_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. -config MTD_NAND_ATMEL_BUSWIDTH_16 - bool "Enable 16-bit data bus interface to NAND flash" - depends on HAVE_NAND_ATMEL_BUSWIDTH_16 - help - On AT91SAM926x boards both types of NAND flash can be present - (8 and 16 bit data bus width). - # ---------------------------------------------------------- comment "AT91 Feature Selections" diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c index 3929f1c9e4e5..096b99f4b1f3 100644 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ b/arch/arm/mach-at91/board-at572d940hf_ek.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -216,11 +217,6 @@ static struct atmel_nand_data __initdata eb_nand_data = { /* .rdy_pin = AT91_PIN_PC16, */ .enable_pin = AT91_PIN_PA15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata eb_nand_smc_config = { @@ -243,6 +239,7 @@ static struct sam9_smc_config __initdata eb_nand_smc_config = { static void __init eb_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (eb_nand_data.bus_width_16) eb_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index e7274440ead9..96010d4e15af 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -44,6 +44,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -187,11 +188,6 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = { // .rdy_pin = ... not connected .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { @@ -219,6 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); + cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index de1816e0e1d9..fdfa144cbe76 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -44,6 +44,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -191,11 +192,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -218,6 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 14acc901e24c..c2773b5f2eee 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -48,6 +48,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -197,11 +198,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -224,6 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index bfe490df58be..1dabc0ae56c9 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -47,6 +47,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -198,11 +199,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -225,6 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index ca8198b3c168..d13acd5c92f2 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -43,6 +43,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -175,11 +176,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -202,6 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 6c999dbd2bcf..49d6849f0ccb 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "sam9_smc.h" #include "generic.h" @@ -155,11 +156,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -182,6 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h new file mode 100644 index 000000000000..b855ee75f72c --- /dev/null +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD + * + * Under GPLv2 only + */ + +#ifndef __ARCH_SYSTEM_REV_H__ +#define __ARCH_SYSTEM_REV_H__ + +/* + * board revision encoding + * mach specific + * the 16-31 bit are reserved for at91 generic information + * + * bit 31: + * 0 => nand 16 bit + * 1 => nand 8 bit + */ +#define BOARD_HAVE_NAND_8BIT (1 << 31) +static int inline board_have_nand_8bit(void) +{ + return system_rev & BOARD_HAVE_NAND_8BIT; +} + +#endif /* __ARCH_SYSTEM_REV_H__ */ -- cgit v1.2.3 From dbadf0f29e2f3719ab950fb3a59e132bbe4bf63e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 5 Apr 2011 01:48:14 +0800 Subject: at91sam9263: merge all boards defconfig into only one MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Tested on at91sam9263ek Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Guillaume GARDET Cc: Grégory Hermant Cc: Nicolas Ferre --- arch/arm/configs/at91sam9263_defconfig | 168 +++++++++++++++++++++++++++++++ arch/arm/configs/at91sam9263ek_defconfig | 106 ------------------- arch/arm/configs/neocore926_defconfig | 104 ------------------- arch/arm/configs/usb-a9263_defconfig | 106 ------------------- 4 files changed, 168 insertions(+), 316 deletions(-) create mode 100644 arch/arm/configs/at91sam9263_defconfig delete mode 100644 arch/arm/configs/at91sam9263ek_defconfig delete mode 100644 arch/arm/configs/neocore926_defconfig delete mode 100644 arch/arm/configs/usb-a9263_defconfig diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig new file mode 100644 index 000000000000..1cf96264cba1 --- /dev/null +++ b/arch/arm/configs/at91sam9263_defconfig @@ -0,0 +1,168 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9263=y +CONFIG_MACH_AT91SAM9263EK=y +CONFIG_MACH_USB_A9263=y +CONFIG_MACH_NEOCORE926=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +CONFIG_IPV6=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_NFTL=y +CONFIG_NFTL_RW=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_BLOCK2MTD=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_LEGACY_PTY_COUNT=4 +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_ATMEL_AC97C=y +# CONFIG_SND_SPI is not set +CONFIG_SND_USB_AUDIO=m +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_MMC=y +CONFIG_SDIO_UART=m +CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_ATMEL_PWM=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_EXT2_FS=y +CONFIG_FUSE_FS=m +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_CRAMFS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_FTRACE=y +CONFIG_DEBUG_USER=y +CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig deleted file mode 100644 index 8a04d6f4e065..000000000000 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_AT91SAM9263EK=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig deleted file mode 100644 index 462dd1850d15..000000000000 --- a/arch/arm/configs/neocore926_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_NEOCORE926=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_ATMEL_PWM=y -CONFIG_ATMEL_TCLIB=y -CONFIG_SCSI=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_SERIAL_ATMEL_PDC is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_LCDC=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_LOGO=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=y -CONFIG_SDIO_UART=y -CONFIG_MMC_AT91=m -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_AUTOFS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_WBUF_VERIFY=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig deleted file mode 100644 index ee82d09249c6..000000000000 --- a/arch/arm/configs/usb-a9263_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_USB_A9263=y -CONFIG_AT91_SLOW_CLOCK=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set -- cgit v1.2.3 From dd41d3216b05200cf01381927804a35315352a35 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 5 Apr 2011 17:52:10 +0800 Subject: at91sam9261: rename at91sam9261ek to at91sam9261 defconfig and update it with ubi, sound, nfs support etc... Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre --- arch/arm/configs/at91sam9261_defconfig | 158 +++++++++++++++++++++++++++++++ arch/arm/configs/at91sam9261ek_defconfig | 95 ------------------- 2 files changed, 158 insertions(+), 95 deletions(-) create mode 100644 arch/arm/configs/at91sam9261_defconfig delete mode 100644 arch/arm/configs/at91sam9261ek_defconfig diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig new file mode 100644 index 000000000000..ade6b2f23116 --- /dev/null +++ b/arch/arm/configs/at91sam9261_defconfig @@ -0,0 +1,158 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91SAM9261=y +CONFIG_MACH_AT91SAM9261EK=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +# CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_INET_LRO is not set +# CONFIG_IPV6 is not set +CONFIG_CFG80211=y +CONFIG_LIB80211=y +CONFIG_MAC80211=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_SSC=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_MULTI_LUN=y +CONFIG_NETDEVICES=y +CONFIG_NET_ETHERNET=y +CONFIG_DM9000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_RTL8187=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_ZD1211RW=m +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91SAM9X_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ATMEL=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_AT73C213=y +CONFIG_SND_USB_AUDIO=m +# CONFIG_USB_HID is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +CONFIG_USB_G_SERIAL=m +CONFIG_MMC=y +CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_AT91SAM9=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_FTRACE=y +CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig deleted file mode 100644 index b46025b66b64..000000000000 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ /dev/null @@ -1,95 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9261=y -CONFIG_MACH_AT91SAM9261EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_DM9000=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91SAM9X_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_GADGET=y -CONFIG_USB_ZERO=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -- cgit v1.2.3 From 2b348e2f82f532e3aff8e0ce9293033b3294c1e0 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 10 Apr 2011 14:10:05 +0800 Subject: atmel_serial: keep the platform_device unchanged specify the port num via platform_data this will allow to match the clock with the plaform_dev staticaly Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Alan Cox Cc: Nicolas Ferre Cc: Patrice Vilchez Cc: Hans-Christian Egtvedt Cc: Greg Kroah-Hartman --- arch/arm/mach-at91/at572d940hf_devices.c | 4 +++- arch/arm/mach-at91/at91cap9_devices.c | 4 +++- arch/arm/mach-at91/at91rm9200_devices.c | 4 +++- arch/arm/mach-at91/at91sam9260_devices.c | 4 +++- arch/arm/mach-at91/at91sam9261_devices.c | 4 +++- arch/arm/mach-at91/at91sam9263_devices.c | 4 +++- arch/arm/mach-at91/at91sam9g45_devices.c | 4 +++- arch/arm/mach-at91/at91sam9rl_devices.c | 4 +++- arch/arm/mach-at91/include/mach/board.h | 1 + arch/avr32/mach-at32ap/at32ap700x.c | 4 +++- arch/avr32/mach-at32ap/include/mach/board.h | 1 + drivers/tty/serial/atmel_serial.c | 2 +- 12 files changed, 30 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c index 0fc20a240782..e52c8e078b0f 100644 --- a/arch/arm/mach-at91/at572d940hf_devices.c +++ b/arch/arm/mach-at91/at572d940hf_devices.c @@ -822,6 +822,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -847,7 +848,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 21020ceb2f3a..ffda9099f6fa 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -1199,6 +1199,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1224,7 +1225,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7b539228e0ef..761559e589a3 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1109,6 +1109,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1139,7 +1140,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 07eb7b07e442..6f8ec8d16d5a 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -1139,6 +1139,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1179,7 +1180,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 59fc48311fb0..8792f9bfb6b0 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -989,6 +989,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1014,7 +1015,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index fb5c23af1017..47a9f965bbb5 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1370,6 +1370,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1395,7 +1396,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 5e9f8a4c38df..eee27eed9133 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1527,6 +1527,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1557,7 +1558,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c49262bddd85..d194b085848e 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -1141,6 +1141,7 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ @@ -1171,7 +1172,8 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2b499eb343a1..c44e94e22857 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -140,6 +140,7 @@ extern void __init at91_set_serial_console(unsigned portnr); extern struct platform_device *atmel_default_console_device; struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virt. base address, if any */ diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index bfc9d071db9b..aa677e2a3823 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1014,6 +1014,7 @@ static struct platform_device *__initdata at32_usarts[4]; void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (hw_id) { case 0: @@ -1042,7 +1043,8 @@ void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) data->regs = (void __iomem *)pdev->resource[0].start; } - pdev->id = line; + pdata = pdev->dev.platform_data; + pdata->num = portnr; at32_usarts[line] = pdev; } diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 61740201b311..679458d9a622 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -33,6 +33,7 @@ extern struct platform_device *atmel_default_console_device; #define ATMEL_USART_CLK 0x04 struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virtual base address, if any */ diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 652bdac8ce8e..6d5d6e679fc7 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1420,7 +1420,7 @@ static void __devinit atmel_init_port(struct atmel_uart_port *atmel_port, port->flags = UPF_BOOT_AUTOCONF; port->ops = &atmel_pops; port->fifosize = 1; - port->line = pdev->id; + port->line = data->num; port->dev = &pdev->dev; port->mapbase = pdev->resource[0].start; port->irq = pdev->resource[1].start; -- cgit v1.2.3 From 1cef3e15721dc9e75f9b661270153e1d6f5e0993 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 11 Apr 2011 23:31:28 +0800 Subject: at91/board-eco920: remove at91_beeper ressource as no driver at91_beeper exist Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre --- arch/arm/mach-at91/board-eco920.c | 19 ------------------- 1 file changed, 19 deletions(-) diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index a158a0ce458f..87f6f83be2c5 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -86,21 +86,6 @@ static struct platform_device eco920_flash = { .num_resources = 1, }; -static struct resource at91_beeper_resources[] = { - [0] = { - .start = AT91RM9200_BASE_TC3, - .end = AT91RM9200_BASE_TC3 + 0x39, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device at91_beeper = { - .name = "at91_beeper", - .id = 0, - .resource = at91_beeper_resources, - .num_resources = ARRAY_SIZE(at91_beeper_resources), -}; - static struct spi_board_info eco920_spi_devices[] = { { /* CAN controller */ .modalias = "tlv5638", @@ -139,10 +124,6 @@ static void __init eco920_board_init(void) AT91_SMC_TDF_(1) /* float time */ ); - at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper"); - at91_set_B_periph(AT91_PIN_PB6, 0); - platform_device_register(&at91_beeper); - at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); } -- cgit v1.2.3 From 1b021a3b23a40be89c4f3fbe6f4696aa15141f26 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 28 Apr 2011 20:19:32 +0800 Subject: at91: fix map_io init usage switch early init to init_early and introduce soc map_io with this Patch we will not do any more early device setup during the map io tks to Russell to point the new call back Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez Acked-by: Russell King Acked-by: Andrew Victor --- arch/arm/mach-at91/at572d940hf.c | 5 ++++- arch/arm/mach-at91/at91cap9.c | 5 ++++- arch/arm/mach-at91/at91rm9200.c | 5 ++++- arch/arm/mach-at91/at91sam9260.c | 9 ++++++--- arch/arm/mach-at91/at91sam9261.c | 6 ++++-- arch/arm/mach-at91/at91sam9263.c | 5 ++++- arch/arm/mach-at91/at91sam9g45.c | 5 ++++- arch/arm/mach-at91/at91sam9rl.c | 5 ++++- arch/arm/mach-at91/board-1arm.c | 5 +++-- arch/arm/mach-at91/board-afeb-9260v1.c | 5 +++-- arch/arm/mach-at91/board-at572d940hf_ek.c | 5 +++-- arch/arm/mach-at91/board-cam60.c | 5 +++-- arch/arm/mach-at91/board-cap9adk.c | 5 +++-- arch/arm/mach-at91/board-carmeva.c | 5 +++-- arch/arm/mach-at91/board-cpu9krea.c | 5 +++-- arch/arm/mach-at91/board-cpuat91.c | 5 +++-- arch/arm/mach-at91/board-csb337.c | 5 +++-- arch/arm/mach-at91/board-csb637.c | 5 +++-- arch/arm/mach-at91/board-eb01.c | 4 ++-- arch/arm/mach-at91/board-eb9200.c | 5 +++-- arch/arm/mach-at91/board-ecbat91.c | 5 +++-- arch/arm/mach-at91/board-eco920.c | 5 +++-- arch/arm/mach-at91/board-flexibity.c | 5 +++-- arch/arm/mach-at91/board-foxg20.c | 5 +++-- arch/arm/mach-at91/board-gsia18s.c | 7 ++++--- arch/arm/mach-at91/board-kafa.c | 5 +++-- arch/arm/mach-at91/board-kb9202.c | 5 +++-- arch/arm/mach-at91/board-neocore926.c | 5 +++-- arch/arm/mach-at91/board-pcontrol-g20.c | 7 ++++--- arch/arm/mach-at91/board-picotux200.c | 5 +++-- arch/arm/mach-at91/board-qil-a9260.c | 5 +++-- arch/arm/mach-at91/board-rm9200dk.c | 5 +++-- arch/arm/mach-at91/board-rm9200ek.c | 5 +++-- arch/arm/mach-at91/board-sam9-l9260.c | 5 +++-- arch/arm/mach-at91/board-sam9260ek.c | 5 +++-- arch/arm/mach-at91/board-sam9261ek.c | 5 +++-- arch/arm/mach-at91/board-sam9263ek.c | 5 +++-- arch/arm/mach-at91/board-sam9g20ek.c | 8 +++++--- arch/arm/mach-at91/board-sam9m10g45ek.c | 5 +++-- arch/arm/mach-at91/board-sam9rlek.c | 5 +++-- arch/arm/mach-at91/board-snapper9260.c | 5 +++-- arch/arm/mach-at91/board-stamp9g20.c | 16 +++++++++------- arch/arm/mach-at91/board-usb-a9260.c | 5 +++-- arch/arm/mach-at91/board-usb-a9263.c | 5 +++-- arch/arm/mach-at91/board-yl-9200.c | 5 +++-- arch/arm/mach-at91/generic.h | 11 +++++++++++ arch/arm/mach-at91/include/mach/stamp9g20.h | 2 +- 47 files changed, 166 insertions(+), 94 deletions(-) diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c index a6b9c68c003a..bacd3764b6c5 100644 --- a/arch/arm/mach-at91/at572d940hf.c +++ b/arch/arm/mach-at91/at572d940hf.c @@ -302,11 +302,14 @@ static void at572d940hf_reset(void) * AT572D940HF processor initialization * -------------------------------------------------------------------- */ -void __init at572d940hf_initialize(unsigned long main_clock) +void __init at572d940hf_map_io(void) { /* Map peripherals */ iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc)); +} +void __init at572d940hf_initialize(unsigned long main_clock) +{ at91_arch_reset = at572d940hf_reset; at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1) | (1 << AT572D940HF_ID_IRQ2); diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 73376170fb91..69df2bb4a703 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -303,11 +303,14 @@ static void at91cap9_poweroff(void) * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -void __init at91cap9_initialize(unsigned long main_clock) +void __init at91cap9_map_io(void) { /* Map peripherals */ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); +} +void __init at91cap9_initialize(unsigned long main_clock) +{ at91_arch_reset = at91cap9_reset; pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 2e9ecad97f3d..164a98ed8888 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -270,11 +270,14 @@ static void at91rm9200_reset(void) /* -------------------------------------------------------------------- * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ -void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +void __init at91rm9200_map_io(void) { /* Map peripherals */ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); +} +void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +{ at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 195208b30024..5430669d7462 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -289,7 +289,7 @@ static void at91sam9260_poweroff(void) * AT91SAM9260 processor initialization * -------------------------------------------------------------------- */ -static void __init at91sam9xe_initialize(void) +static void __init at91sam9xe_map_io(void) { unsigned long cidr, sram_size; @@ -310,18 +310,21 @@ static void __init at91sam9xe_initialize(void) iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); } -void __init at91sam9260_initialize(unsigned long main_clock) +void __init at91sam9260_map_io(void) { /* Map peripherals */ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); if (cpu_is_at91sam9xe()) - at91sam9xe_initialize(); + at91sam9xe_map_io(); else if (cpu_is_at91sam9g20()) iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc)); else iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); +} +void __init at91sam9260_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index fcad88668504..e3bafaebe010 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -267,7 +267,7 @@ static void at91sam9261_poweroff(void) * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9261_initialize(unsigned long main_clock) +void __init at91sam9261_map_io(void) { /* Map peripherals */ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); @@ -276,8 +276,10 @@ void __init at91sam9261_initialize(unsigned long main_clock) iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc)); else iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc)); +} - +void __init at91sam9261_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 249f900954d8..6a085fedf6a3 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -279,11 +279,14 @@ static void at91sam9263_poweroff(void) * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9263_initialize(unsigned long main_clock) +void __init at91sam9263_map_io(void) { /* Map peripherals */ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); +} +void __init at91sam9263_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index c67b47f1c0fd..024e456b943f 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -306,11 +306,14 @@ static void at91sam9g45_poweroff(void) * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9g45_initialize(unsigned long main_clock) +void __init at91sam9g45_map_io(void) { /* Map peripherals */ iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc)); +} +void __init at91sam9g45_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9g45_reset; pm_power_off = at91sam9g45_poweroff; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 6a9d24e5ed8e..67c869783c7e 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -252,7 +252,7 @@ static void at91sam9rl_poweroff(void) * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9rl_initialize(unsigned long main_clock) +void __init at91sam9rl_map_io(void) { unsigned long cidr, sram_size; @@ -275,7 +275,10 @@ void __init at91sam9rl_initialize(unsigned long main_clock) /* Map SRAM */ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); +} +void __init at91sam9rl_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 8a3fc84847c1..672bbd85f952 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,7 +39,7 @@ #include "generic.h" -static void __init onearm_map_io(void) +static void __init onearm_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -94,7 +94,8 @@ MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = onearm_map_io, + .map_io = at91rm9200_map_io, + .init_early = onearm_init_early, .init_irq = onearm_init_irq, .init_machine = onearm_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index cba7f7771fee..00a92a55e940 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init afeb9260_map_io(void) +static void __init afeb9260_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -220,7 +220,8 @@ MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = afeb9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = afeb9260_init_early, .init_irq = afeb9260_init_irq, .init_machine = afeb9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c index 096b99f4b1f3..a11d7093a1f9 100644 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ b/arch/arm/mach-at91/board-at572d940hf_ek.c @@ -47,7 +47,7 @@ #include "generic.h" -static void __init eb_map_io(void) +static void __init eb_init_early(void) { /* Initialize processor: 12.500 MHz crystal */ at572d940hf_initialize(12000000); @@ -317,7 +317,8 @@ MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = eb_map_io, + .map_io = at572d940hf_map_io, + .init_early = eb_init_early, .init_irq = eb_init_irq, .init_machine = eb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index b54e3e6fceb6..3025b905bc30 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -45,7 +45,7 @@ #include "generic.h" -static void __init cam60_map_io(void) +static void __init cam60_init_early(void) { /* Initialize processor: 10 MHz crystal */ at91sam9260_initialize(10000000); @@ -200,7 +200,8 @@ MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cam60_map_io, + .map_io = at91sam9260_map_io, + .init_early = cam60_init_early, .init_irq = cam60_init_irq, .init_machine = cam60_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 96010d4e15af..af90569204a3 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -50,7 +50,7 @@ #include "generic.h" -static void __init cap9adk_map_io(void) +static void __init cap9adk_init_early(void) { /* Initialize processor: 12 MHz crystal */ at91cap9_initialize(12000000); @@ -398,7 +398,8 @@ MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cap9adk_map_io, + .map_io = at91cap9_map_io, + .init_early = cap9adk_init_early, .init_irq = cap9adk_init_irq, .init_machine = cap9adk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 295e1e77fa60..dfa98f34281d 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -40,7 +40,7 @@ #include "generic.h" -static void __init carmeva_map_io(void) +static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ at91rm9200_initialize(20000000, AT91RM9200_BGA); @@ -164,7 +164,8 @@ MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = carmeva_map_io, + .map_io = at91rm9200_map_io, + .init_early = carmeva_init_early, .init_irq = carmeva_init_irq, .init_machine = carmeva_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 3838594578f3..34fd892edff4 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -47,7 +47,7 @@ #include "sam9_smc.h" #include "generic.h" -static void __init cpu9krea_map_io(void) +static void __init cpu9krea_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -377,7 +377,8 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") /* Maintainer: Eric Benard - EUKREA Electromatique */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cpu9krea_map_io, + .map_io = at91sam9260_map_io, + .init_early = cpu9krea_init_early, .init_irq = cpu9krea_init_irq, .init_machine = cpu9krea_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2f4dd8cdd484..34c9d0c75e42 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -50,7 +50,7 @@ static struct gpio_led cpuat91_leds[] = { }, }; -static void __init cpuat91_map_io(void) +static void __init cpuat91_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -177,7 +177,8 @@ MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = cpuat91_map_io, + .map_io = at91rm9200_map_io, + .init_early = cpuat91_init_early, .init_irq = cpuat91_init_irq, .init_machine = cpuat91_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 464839dc39bd..a48a32ddb049 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -43,7 +43,7 @@ #include "generic.h" -static void __init csb337_map_io(void) +static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ at91rm9200_initialize(3686400, AT91RM9200_BGA); @@ -259,7 +259,8 @@ MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb337_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb337_init_early, .init_irq = csb337_init_irq, .init_machine = csb337_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 431688c61412..7f0ee1cd9e8b 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -40,7 +40,7 @@ #include "generic.h" -static void __init csb637_map_io(void) +static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ at91rm9200_initialize(3686400, AT91RM9200_BGA); @@ -140,7 +140,8 @@ MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb637_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb637_init_early, .init_irq = csb637_init_irq, .init_machine = csb637_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index d8df59a3426d..d2023f27c652 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -35,7 +35,7 @@ static void __init at91eb01_init_irq(void) at91x40_init_interrupts(NULL); } -static void __init at91eb01_map_io(void) +static void __init at91eb01_init_early(void) { at91x40_initialize(40000000); } @@ -43,7 +43,7 @@ static void __init at91eb01_map_io(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer */ .timer = &at91x40_timer, + .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, - .map_io = at91eb01_map_io, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 6cf6566ae346..0de1ba43c755 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -40,7 +40,7 @@ #include "generic.h" -static void __init eb9200_map_io(void) +static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); @@ -122,7 +122,8 @@ static void __init eb9200_board_init(void) MACHINE_START(ATEB9200, "Embest ATEB9200") .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eb9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = eb9200_init_early, .init_irq = eb9200_init_irq, .init_machine = eb9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index de2fd04e7c8a..bd46395aca85 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -42,7 +42,7 @@ #include "generic.h" -static void __init ecb_at91map_io(void) +static void __init ecb_at91init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -170,7 +170,8 @@ MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ecb_at91map_io, + .map_io = at91rm9200_map_io, + .init_early = ecb_at91init_early, .init_irq = ecb_at91init_irq, .init_machine = ecb_at91board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 87f6f83be2c5..6fff26df723e 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -28,7 +28,7 @@ #include #include "generic.h" -static void __init eco920_map_io(void) +static void __init eco920_init_early(void) { at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -131,7 +131,8 @@ MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eco920_map_io, + .map_io = at91rm9200_map_io, + .init_early = eco920_init_early, .init_irq = eco920_init_irq, .init_machine = eco920_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index c8a62dc8fa65..934542f624b6 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,7 +37,7 @@ #include "generic.h" -static void __init flexibity_map_io(void) +static void __init flexibity_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -156,7 +156,8 @@ MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = flexibity_map_io, + .map_io = at91sam9260_map_io, + .init_early = flexibity_init_early, .init_irq = flexibity_init_irq, .init_machine = flexibity_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index dfc7dfe738e4..470a66b275ba 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -57,7 +57,7 @@ */ -static void __init foxg20_map_io(void) +static void __init foxg20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -268,7 +268,8 @@ MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = foxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = foxg20_init_early, .init_irq = foxg20_init_irq, .init_machine = foxg20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index bc28136ee249..2b409decaae8 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -38,9 +38,9 @@ #include "sam9_smc.h" #include "generic.h" -static void __init gsia18s_map_io(void) +static void __init gsia18s_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI). @@ -578,7 +578,8 @@ static void __init gsia18s_board_init(void) MACHINE_START(GSIA18S, "GS_IA18_S") .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = gsia18s_map_io, + .map_io = at91sam9260_map_io, + .init_early = gsia18s_init_early, .init_irq = init_irq, .init_machine = gsia18s_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index d2e1f4ec1fcc..49557d3be95b 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,7 +39,7 @@ #include "generic.h" -static void __init kafa_map_io(void) +static void __init kafa_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -96,7 +96,8 @@ MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kafa_map_io, + .map_io = at91rm9200_map_io, + .init_early = kafa_init_early, .init_irq = kafa_init_irq, .init_machine = kafa_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a13d2063faff..fca061a7370f 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -42,7 +42,7 @@ #include "generic.h" -static void __init kb9202_map_io(void) +static void __init kb9202_init_early(void) { /* Initialize processor: 10 MHz crystal */ at91rm9200_initialize(10000000, AT91RM9200_PQFP); @@ -138,7 +138,8 @@ MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kb9202_map_io, + .map_io = at91rm9200_map_io, + .init_early = kb9202_init_early, .init_irq = kb9202_init_irq, .init_machine = kb9202_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index fe5f1d47e6e2..004b76da64f5 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -51,7 +51,7 @@ #include "generic.h" -static void __init neocore926_map_io(void) +static void __init neocore926_init_early(void) { /* Initialize processor: 20 MHz crystal */ at91sam9263_initialize(20000000); @@ -389,7 +389,8 @@ MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = neocore926_map_io, + .map_io = at91sam9263_map_io, + .init_early = neocore926_init_early, .init_irq = neocore926_init_irq, .init_machine = neocore926_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index feb65787c30b..df1ed7e2806b 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,9 +37,9 @@ #include "generic.h" -static void __init pcontrol_g20_map_io(void) +static void __init pcontrol_g20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS @@ -224,7 +224,8 @@ MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = pcontrol_g20_map_io, + .map_io = at91sam9260_map_io, + .init_early = pcontrol_g20_init_early, .init_irq = init_irq, .init_machine = pcontrol_g20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 55dad3a46547..97372f692593 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,7 +43,7 @@ #include "generic.h" -static void __init picotux200_map_io(void) +static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); @@ -125,7 +125,8 @@ MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = picotux200_map_io, + .map_io = at91rm9200_map_io, + .init_early = picotux200_init_early, .init_irq = picotux200_init_irq, .init_machine = picotux200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 69d15a875b66..5822d8ea4719 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -270,7 +270,8 @@ MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 4c1047c8200d..4f04f284dcb1 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -45,7 +45,7 @@ #include "generic.h" -static void __init dk_map_io(void) +static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); @@ -229,7 +229,8 @@ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = dk_map_io, + .map_io = at91rm9200_map_io, + .init_early = dk_init_early, .init_irq = dk_init_irq, .init_machine = dk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 9df1be8818c0..cf161c54ee07 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,7 +45,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); @@ -195,7 +195,8 @@ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ek_map_io, + .map_io = at91rm9200_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 25a26beaa728..b925ba99abc2 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -44,7 +44,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -214,7 +214,8 @@ MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index fdfa144cbe76..b1a358492d88 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -50,7 +50,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -355,7 +355,8 @@ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index c2773b5f2eee..57d243445b53 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -54,7 +54,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9261_initialize(18432000); @@ -622,7 +622,8 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9261_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 1dabc0ae56c9..232634dc17cf 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -53,7 +53,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 16.367 MHz crystal */ at91sam9263_initialize(16367660); @@ -453,7 +453,8 @@ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index d13acd5c92f2..0a24f3f687c8 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -61,7 +61,7 @@ static int inline ek_have_2mmc(void) } -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -405,7 +405,8 @@ MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END @@ -414,7 +415,8 @@ MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 49d6849f0ccb..645c97063c7a 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -47,7 +47,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9g45_initialize(12000000); @@ -423,7 +423,8 @@ MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9g45_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 3bf3408e94c1..102f86210607 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -38,7 +38,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9rl_initialize(12000000); @@ -331,7 +331,8 @@ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9rl_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 17f7d9b32142..ad956286aeab 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -40,7 +40,7 @@ #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) -static void __init snapper9260_map_io(void) +static void __init snapper9260_init_early(void) { at91sam9260_initialize(18432000); @@ -180,7 +180,8 @@ static void __init snapper9260_board_init(void) MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = snapper9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = snapper9260_init_early, .init_irq = snapper9260_init_irq, .init_machine = snapper9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index f8902b118960..38515e4d1fb5 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,7 +32,7 @@ #include "generic.h" -void __init stamp9g20_map_io(void) +void __init stamp9g20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -44,9 +44,9 @@ void __init stamp9g20_map_io(void) at91_set_serial_console(0); } -static void __init stamp9g20evb_map_io(void) +static void __init stamp9g20evb_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -54,9 +54,9 @@ static void __init stamp9g20evb_map_io(void) | ATMEL_UART_DCD | ATMEL_UART_RI); } -static void __init portuxg20_map_io(void) +static void __init portuxg20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -300,7 +300,8 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = portuxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = portuxg20_init_early, .init_irq = init_irq, .init_machine = portuxg20_board_init, MACHINE_END @@ -309,7 +310,8 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = stamp9g20evb_map_io, + .map_io = at91sam9260_map_io, + .init_early = stamp9g20evb_init_early, .init_irq = init_irq, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 07784baeae84..a0c17d5a6477 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -230,7 +230,8 @@ MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index b614508931fd..5356af7e87e2 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -47,7 +47,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.00 MHz crystal */ at91sam9263_initialize(12000000); @@ -246,7 +246,8 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index e0f0080eb639..8f9ea5aa6719 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -49,7 +49,7 @@ #include "generic.h" -static void __init yl9200_map_io(void) +static void __init yl9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); @@ -596,7 +596,8 @@ MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = yl9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = yl9200_init_early, .init_irq = yl9200_init_irq, .init_machine = yl9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0c66deb2db39..50d46fa9ddb6 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -8,6 +8,17 @@ * published by the Free Software Foundation. */ + /* Map io */ +extern void __init at91rm9200_map_io(void); +extern void __init at91sam9260_map_io(void); +extern void __init at91sam9261_map_io(void); +extern void __init at91sam9263_map_io(void); +extern void __init at91sam9rl_map_io(void); +extern void __init at91sam9g45_map_io(void); +extern void __init at91x40_map_io(void); +extern void __init at91cap9_map_io(void); +extern void __init at572d940hf_map_io(void); + /* Processors */ extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); extern void __init at91sam9260_initialize(unsigned long main_clock); diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h index 6120f9c46d59..f62c0abca4b4 100644 --- a/arch/arm/mach-at91/include/mach/stamp9g20.h +++ b/arch/arm/mach-at91/include/mach/stamp9g20.h @@ -1,7 +1,7 @@ #ifndef __MACH_STAMP9G20_H #define __MACH_STAMP9G20_H -void stamp9g20_map_io(void); +void stamp9g20_init_early(void); void stamp9g20_board_init(void); #endif -- cgit v1.2.3 From bd60299594fb1d28ae66563c9e76a0b89b0412cf Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Wed, 2 Feb 2011 07:27:07 +0100 Subject: at91: switch to CLKDEV_LOOKUP we do not change the clock naming convention so does not need to switch the AVR32 yet Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Cc: Patrice Vilchez --- arch/arm/Kconfig | 1 + arch/arm/mach-at91/at572d940hf.c | 32 +++++++++++++++ arch/arm/mach-at91/at572d940hf_devices.c | 14 ++----- arch/arm/mach-at91/at91cap9.c | 36 +++++++++++++++++ arch/arm/mach-at91/at91cap9_devices.c | 20 ++-------- arch/arm/mach-at91/at91rm9200.c | 37 ++++++++++++++++++ arch/arm/mach-at91/at91rm9200_devices.c | 20 ++-------- arch/arm/mach-at91/at91sam9260.c | 39 +++++++++++++++++++ arch/arm/mach-at91/at91sam9260_devices.c | 22 ++--------- arch/arm/mach-at91/at91sam9261.c | 35 +++++++++++++++++ arch/arm/mach-at91/at91sam9261_devices.c | 17 ++------ arch/arm/mach-at91/at91sam9263.c | 34 ++++++++++++++++ arch/arm/mach-at91/at91sam9263_devices.c | 16 ++------ arch/arm/mach-at91/at91sam9g45.c | 59 +++++++++++++++++++--------- arch/arm/mach-at91/at91sam9g45_devices.c | 23 ++--------- arch/arm/mach-at91/at91sam9rl.c | 35 +++++++++++++++++ arch/arm/mach-at91/at91sam9rl_devices.c | 19 ++------- arch/arm/mach-at91/at91x40.c | 5 --- arch/arm/mach-at91/clock.c | 67 +++++++++----------------------- arch/arm/mach-at91/clock.h | 20 +++++++++- arch/arm/mach-at91/generic.h | 16 +++++++- arch/arm/mach-at91/include/mach/clkdev.h | 7 ++++ 22 files changed, 372 insertions(+), 202 deletions(-) create mode 100644 arch/arm/mach-at91/include/mach/clkdev.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7275009686e6..5fd0be92f70b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -294,6 +294,7 @@ config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select CLKDEV_LOOKUP help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c index bacd3764b6c5..d06990777ffe 100644 --- a/arch/arm/mach-at91/at572d940hf.c +++ b/arch/arm/mach-at91/at572d940hf.c @@ -205,6 +205,21 @@ static struct clk *periph_clocks[] __initdata = { /* irq0 .. irq2 */ }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The five programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -262,6 +277,11 @@ static void __init at572d940hf_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); @@ -272,6 +292,18 @@ static void __init at572d940hf_register_clocks(void) clk_register(&hck1); } +static struct clk_lookup console_clock_lookup; + +void __init at572d940hf_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c index e52c8e078b0f..14863b8e7e6a 100644 --- a/arch/arm/mach-at91/at572d940hf_devices.c +++ b/arch/arm/mach-at91/at572d940hf_devices.c @@ -532,7 +532,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk"); platform_device_register(&at572d940hf_spi0_device); } if (enable_spi1) { @@ -540,7 +539,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk"); platform_device_register(&at572d940hf_spi1_device); } } @@ -587,10 +585,6 @@ static struct platform_device at572d940hf_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk"); platform_device_register(&at572d940hf_tcb_device); } #else @@ -828,22 +822,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at572d940hf_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT572D940HF_ID_US0: pdev = &at572d940hf_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT572D940HF_ID_US1: pdev = &at572d940hf_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT572D940HF_ID_US2: pdev = &at572d940hf_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; @@ -857,8 +847,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at572d940hf_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 69df2bb4a703..17fae4a42ab5 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91cap9_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index ffda9099f6fa..cd850ed6f335 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -181,10 +181,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -355,7 +351,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -373,7 +368,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc1_device); } } @@ -614,7 +608,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi0_device); } if (enable_spi1) { @@ -622,7 +615,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi1_device); } } @@ -659,8 +651,6 @@ static struct platform_device at91cap9_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk"); platform_device_register(&at91cap9_tcb_device); } #else @@ -1001,12 +991,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91CAP9_ID_SSC0: pdev = &at91cap9_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91CAP9_ID_SSC1: pdev = &at91cap9_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; default: return; @@ -1205,22 +1193,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91cap9_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91CAP9_ID_US0: pdev = &at91cap9_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US1: pdev = &at91cap9_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US2: pdev = &at91cap9_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; @@ -1234,8 +1218,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91cap9_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 164a98ed8888..d3638bd994da 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -191,6 +191,26 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq6 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -227,12 +247,29 @@ static void __init at91rm9200_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91rm9200_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 761559e589a3..a0ba475be04c 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -644,15 +644,7 @@ static struct platform_device at91rm9200_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb0_device); - - at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb1_device); } #else @@ -849,17 +841,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91RM9200_ID_SSC0: pdev = &at91rm9200_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC1: pdev = &at91rm9200_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC2: pdev = &at91rm9200_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "ssc"); break; default: return; @@ -1115,27 +1104,22 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91rm9200_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91RM9200_ID_US0: pdev = &at91rm9200_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US1: pdev = &at91rm9200_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US2: pdev = &at91rm9200_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US3: pdev = &at91rm9200_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; @@ -1149,8 +1133,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91rm9200_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 5430669d7462..7d606b04d313 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -231,6 +231,28 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -255,10 +277,27 @@ static void __init at91sam9260_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9260_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 6f8ec8d16d5a..1fdeb9058a76 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -609,7 +609,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi0_device); } if (enable_spi1) { @@ -617,7 +616,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi1_device); } } @@ -694,15 +692,7 @@ static struct platform_device at91sam9260_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb0_device); - - at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb1_device); } #else @@ -820,7 +810,6 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9260_ID_SSC: pdev = &at91sam9260_ssc_device; configure_ssc_pins(pins); - at91_clock_associate("ssc_clk", &pdev->dev, "pclk"); break; default: return; @@ -1145,37 +1134,30 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91sam9260_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US0: pdev = &at91sam9260_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US1: pdev = &at91sam9260_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US2: pdev = &at91sam9260_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US3: pdev = &at91sam9260_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US4: pdev = &at91sam9260_uart4_device; configure_usart4_pins(); - at91_clock_associate("usart4_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US5: pdev = &at91sam9260_uart5_device; configure_usart5_pins(); - at91_clock_associate("usart5_clk", &pdev->dev, "usart"); break; default: return; @@ -1189,8 +1171,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9260_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index e3bafaebe010..c1483168c97a 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,6 +178,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -228,6 +246,11 @@ static void __init at91sam9261_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); @@ -237,6 +260,18 @@ static void __init at91sam9261_register_clocks(void) clk_register(&hck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9261_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8792f9bfb6b0..3eb4538fceeb 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -426,7 +426,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi0_device); } if (enable_spi1) { @@ -434,7 +433,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi1_device); } } @@ -581,10 +579,6 @@ static struct platform_device at91sam9261_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9261_tcb_device); } #else @@ -786,17 +780,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9261_ID_SSC0: pdev = &at91sam9261_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC1: pdev = &at91sam9261_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC2: pdev = &at91sam9261_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "pclk"); break; default: return; @@ -995,22 +986,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91sam9261_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US0: pdev = &at91sam9261_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US1: pdev = &at91sam9261_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US2: pdev = &at91sam9261_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; @@ -1024,8 +1011,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9261_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 6a085fedf6a3..dc28477d14ff 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -199,6 +199,23 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -235,12 +252,29 @@ static void __init at91sam9263_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9263_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 47a9f965bbb5..ffe081b77ed0 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -308,7 +308,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -339,7 +338,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc1_device); } } @@ -686,7 +684,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi0_device); } if (enable_spi1) { @@ -694,7 +691,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi1_device); } } @@ -941,8 +937,6 @@ static struct platform_device at91sam9263_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk"); platform_device_register(&at91sam9263_tcb_device); } #else @@ -1171,12 +1165,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9263_ID_SSC0: pdev = &at91sam9263_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9263_ID_SSC1: pdev = &at91sam9263_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1376,22 +1368,18 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91sam9263_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US0: pdev = &at91sam9263_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US1: pdev = &at91sam9263_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US2: pdev = &at91sam9263_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; @@ -1405,8 +1393,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9263_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 024e456b943f..2bb6ff9af1c7 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -184,22 +184,6 @@ static struct clk vdec_clk = { .type = CLK_TYPE_PERIPHERAL, }; -/* One additional fake clock for ohci */ -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &uhphs_clk, -}; - -/* One additional fake clock for second TC block */ -static struct clk tcb1_clk = { - .name = "tcb1_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &tcb0_clk, -}; - static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -228,8 +212,30 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &mmc1_clk, // irq0 - &ohci_clk, - &tcb1_clk, +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for ohci */ + CLKDEV_CON_ID("ohci_clk", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), }; /* @@ -256,6 +262,11 @@ static void __init at91sam9g45_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) clk_register(&vdec_clk); @@ -263,6 +274,18 @@ static void __init at91sam9g45_register_clocks(void) clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9g45_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index eee27eed9133..05674865bc21 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -180,7 +180,6 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) } usbh_ehci_data = *data; - at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk"); platform_device_register(&at91_usbh_ehci_device); } #else @@ -266,10 +265,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -478,7 +473,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc0_device); } else { /* MCI1 */ @@ -504,7 +498,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc1_device); } @@ -801,7 +794,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi0_device); } if (enable_spi1) { @@ -809,7 +801,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi1_device); } } @@ -999,10 +990,7 @@ static struct platform_device at91sam9g45_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all six TC channels */ - at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb0_device); - at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb1_device); } #else @@ -1286,12 +1274,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9G45_ID_SSC0: pdev = &at91sam9g45_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9G45_ID_SSC1: pdev = &at91sam9g45_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1533,27 +1519,22 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91sam9g45_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US0: pdev = &at91sam9g45_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US1: pdev = &at91sam9g45_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US2: pdev = &at91sam9g45_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US3: pdev = &at91sam9g45_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; @@ -1567,8 +1548,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9g45_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 67c869783c7e..1a40f16b66c8 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -190,6 +190,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -214,10 +232,27 @@ static void __init at91sam9rl_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9rl_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index d194b085848e..c296045f2b6a 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -155,10 +155,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -605,10 +601,6 @@ static struct platform_device at91sam9rl_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9rl_tcb_device); } #else @@ -892,12 +884,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9RL_ID_SSC0: pdev = &at91sam9rl_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9RL_ID_SSC1: pdev = &at91sam9rl_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1147,27 +1137,22 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) case 0: /* DBGU */ pdev = &at91sam9rl_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US0: pdev = &at91sam9rl_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US1: pdev = &at91sam9rl_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US2: pdev = &at91sam9rl_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US3: pdev = &at91sam9rl_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; @@ -1181,8 +1166,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9rl_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index ad3ec85b2790..56ba3bd035ae 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -37,11 +37,6 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } -struct clk *clk_get(struct device *dev, const char *id) -{ - return NULL; -} - void __init at91x40_initialize(unsigned long main_clock) { at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 9113da6845f1..ac103cbdbf35 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -163,7 +163,7 @@ static struct clk udpck = { .parent = &pllb, .mode = pmc_sys_mode, }; -static struct clk utmi_clk = { +struct clk utmi_clk = { .name = "utmi_clk", .parent = &main_clk, .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */ @@ -182,7 +182,7 @@ static struct clk uhpck = { * memory, interfaces to on-chip peripherals, the AIC, and sometimes more * (e.g baud rate generation). It's sourced from one of the primary clocks. */ -static struct clk mck = { +struct clk mck = { .name = "mck", .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */ }; @@ -215,43 +215,6 @@ static struct clk __init *at91_css_to_clk(unsigned long css) return NULL; } -/* - * Associate a particular clock with a function (eg, "uart") and device. - * The drivers can then request the same 'function' with several different - * devices and not care about which clock name to use. - */ -void __init at91_clock_associate(const char *id, struct device *dev, const char *func) -{ - struct clk *clk = clk_get(NULL, id); - - if (!dev || !clk || !IS_ERR(clk_get(dev, func))) - return; - - clk->function = func; - clk->dev = dev; -} - -/* clocks cannot be de-registered no refcounting necessary */ -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *clk; - - list_for_each_entry(clk, &clocks, node) { - if (strcmp(id, clk->name) == 0) - return clk; - if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0) - return clk; - } - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - static void __clk_enable(struct clk *clk) { if (clk->parent) @@ -498,32 +461,38 @@ postcore_initcall(at91_clk_debugfs_init); /*------------------------------------------------------------------------*/ /* Register a new clock */ +static void __init at91_clk_add(struct clk *clk) +{ + list_add_tail(&clk->node, &clocks); + + clk->cl.con_id = clk->name; + clk->cl.clk = clk; + clkdev_add(&clk->cl); +} + int __init clk_register(struct clk *clk) { if (clk_is_peripheral(clk)) { if (!clk->parent) clk->parent = &mck; clk->mode = pmc_periph_mode; - list_add_tail(&clk->node, &clocks); } else if (clk_is_sys(clk)) { clk->parent = &mck; clk->mode = pmc_sys_mode; - - list_add_tail(&clk->node, &clocks); } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS else if (clk_is_programmable(clk)) { clk->mode = pmc_sys_mode; init_programmable_clock(clk); - list_add_tail(&clk->node, &clocks); } #endif + at91_clk_add(clk); + return 0; } - /*------------------------------------------------------------------------*/ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) @@ -754,19 +723,19 @@ int __init at91_clock_init(unsigned long main_clock) /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) - list_add_tail(&standard_pmc_clocks[i]->node, &clocks); + at91_clk_add(standard_pmc_clocks[i]); if (cpu_has_pllb()) - list_add_tail(&pllb.node, &clocks); + at91_clk_add(&pllb); if (cpu_has_uhp()) - list_add_tail(&uhpck.node, &clocks); + at91_clk_add(&uhpck); if (cpu_has_udpfs()) - list_add_tail(&udpck.node, &clocks); + at91_clk_add(&udpck); if (cpu_has_utmi()) - list_add_tail(&utmi_clk.node, &clocks); + at91_clk_add(&utmi_clk); /* MCK and CPU clock are "always on" */ clk_enable(&mck); diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h index 6cf4b78e175d..c2e63e47dcbe 100644 --- a/arch/arm/mach-at91/clock.h +++ b/arch/arm/mach-at91/clock.h @@ -6,6 +6,8 @@ * published by the Free Software Foundation. */ +#include + #define CLK_TYPE_PRIMARY 0x1 #define CLK_TYPE_PLL 0x2 #define CLK_TYPE_PROGRAMMABLE 0x4 @@ -16,8 +18,7 @@ struct clk { struct list_head node; const char *name; /* unique clock name */ - const char *function; /* function of the clock */ - struct device *dev; /* device associated with function */ + struct clk_lookup cl; unsigned long rate_hz; struct clk *parent; u32 pmc_mask; @@ -29,3 +30,18 @@ struct clk { extern int __init clk_register(struct clk *clk); +extern struct clk mck; +extern struct clk utmi_clk; + +#define CLKDEV_CON_ID(_id, _clk) \ + { \ + .con_id = _id, \ + .clk = _clk, \ + } + +#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \ + { \ + .con_id = _con_id, \ + .dev_id = _dev_id, \ + .clk = _clk, \ + } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 50d46fa9ddb6..ecba94ee520b 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include + /* Map io */ extern void __init at91rm9200_map_io(void); extern void __init at91sam9260_map_io(void); @@ -50,8 +52,20 @@ extern struct sys_timer at91x40_timer; /* Clocks */ extern int __init at91_clock_init(unsigned long main_clock); +/* + * function to specify the clock of the default console. As we do not + * use the device/driver bus, the dev_name is not intialize. So we need + * to link the clock to a specific con_id only "usart" + */ +extern void __init at91rm9200_set_console_clock(int id); +extern void __init at91sam9260_set_console_clock(int id); +extern void __init at91sam9261_set_console_clock(int id); +extern void __init at91sam9263_set_console_clock(int id); +extern void __init at91sam9rl_set_console_clock(int id); +extern void __init at91sam9g45_set_console_clock(int id); +extern void __init at91cap9_set_console_clock(int id); +extern void __init at572d940hf_set_console_clock(int id); struct device; -extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func); /* Power Management */ extern void at91_irq_suspend(void); diff --git a/arch/arm/mach-at91/include/mach/clkdev.h b/arch/arm/mach-at91/include/mach/clkdev.h new file mode 100644 index 000000000000..04b37a89801c --- /dev/null +++ b/arch/arm/mach-at91/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif -- cgit v1.2.3 From ee2e35015d4f09ce748a96a79582e959e6053f1a Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 2 May 2011 01:05:54 +0800 Subject: at91: factorize common irq ID Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez Cc: Andrew Victor --- arch/arm/mach-at91/include/mach/at572d940hf.h | 2 -- arch/arm/mach-at91/include/mach/at91cap9.h | 2 -- arch/arm/mach-at91/include/mach/at91rm9200.h | 2 -- arch/arm/mach-at91/include/mach/at91sam9260.h | 2 -- arch/arm/mach-at91/include/mach/at91sam9261.h | 2 -- arch/arm/mach-at91/include/mach/at91sam9263.h | 2 -- arch/arm/mach-at91/include/mach/at91sam9g45.h | 2 -- arch/arm/mach-at91/include/mach/at91sam9rl.h | 2 -- arch/arm/mach-at91/include/mach/at91x40.h | 2 -- arch/arm/mach-at91/include/mach/hardware.h | 6 ++++++ 10 files changed, 6 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h index be510cfc56be..a738dc7e5d44 100644 --- a/arch/arm/mach-at91/include/mach/at572d940hf.h +++ b/arch/arm/mach-at91/include/mach/at572d940hf.h @@ -26,8 +26,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */ #define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */ #define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 9c6af9737485..a043bce8da97 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ #define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ #define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 78983155a074..99e0f8d02d7b 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -19,8 +19,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 4e79036d3b80..8b6bf835cd73 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 2b5618518129..eafbddaf523c 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 2091f1e42d43..e2d348213a7b 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index a526869aee37..520b14b9cfe9 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller Interrupt */ #define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ #define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ #define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 87ba8517ad98..41dbbe61055c 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -17,8 +17,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller */ #define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index 063ac44a0204..a152ff87e688 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -15,8 +15,6 @@ /* * IRQ list. */ -#define AT91_ID_FIQ 0 /* FIQ */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91X40_ID_USART0 2 /* USART port 0 */ #define AT91X40_ID_USART1 3 /* USART port 1 */ #define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 3d64a75e3ed5..352246407f72 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -39,6 +39,12 @@ #endif +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ + #ifdef CONFIG_MMU /* * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF -- cgit v1.2.3 From 3d51f259e819b49b3f88b594afcb044d1ffcda8a Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 3 May 2011 00:44:58 +0800 Subject: at91: drop boot_params and PLAT_PHYS_OFFSET select ARM_PATCH_PHYS_VIRT as with ARM_PATCH_PHYS_VIRT you can patch boot_params at runtime or any recent bootloader will provide a valid atags pointer in r2 as point out by Russell on AT91 we never use XIP so se do not need PLAT_PHYS_OFFSET Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez Cc: Andrew Victor Cc: Russell King --- arch/arm/Kconfig | 1 + arch/arm/mach-at91/board-1arm.c | 1 - arch/arm/mach-at91/board-afeb-9260v1.c | 1 - arch/arm/mach-at91/board-at572d940hf_ek.c | 1 - arch/arm/mach-at91/board-cam60.c | 1 - arch/arm/mach-at91/board-cap9adk.c | 1 - arch/arm/mach-at91/board-carmeva.c | 1 - arch/arm/mach-at91/board-cpu9krea.c | 1 - arch/arm/mach-at91/board-cpuat91.c | 1 - arch/arm/mach-at91/board-csb337.c | 1 - arch/arm/mach-at91/board-csb637.c | 1 - arch/arm/mach-at91/board-eb9200.c | 1 - arch/arm/mach-at91/board-ecbat91.c | 1 - arch/arm/mach-at91/board-eco920.c | 1 - arch/arm/mach-at91/board-flexibity.c | 1 - arch/arm/mach-at91/board-foxg20.c | 1 - arch/arm/mach-at91/board-gsia18s.c | 1 - arch/arm/mach-at91/board-kafa.c | 1 - arch/arm/mach-at91/board-kb9202.c | 1 - arch/arm/mach-at91/board-neocore926.c | 1 - arch/arm/mach-at91/board-pcontrol-g20.c | 1 - arch/arm/mach-at91/board-picotux200.c | 1 - arch/arm/mach-at91/board-qil-a9260.c | 1 - arch/arm/mach-at91/board-rm9200dk.c | 1 - arch/arm/mach-at91/board-rm9200ek.c | 1 - arch/arm/mach-at91/board-sam9-l9260.c | 1 - arch/arm/mach-at91/board-sam9260ek.c | 1 - arch/arm/mach-at91/board-sam9261ek.c | 1 - arch/arm/mach-at91/board-sam9263ek.c | 1 - arch/arm/mach-at91/board-sam9g20ek.c | 2 -- arch/arm/mach-at91/board-sam9m10g45ek.c | 1 - arch/arm/mach-at91/board-sam9rlek.c | 1 - arch/arm/mach-at91/board-snapper9260.c | 1 - arch/arm/mach-at91/board-stamp9g20.c | 2 -- arch/arm/mach-at91/board-usb-a9260.c | 1 - arch/arm/mach-at91/board-usb-a9263.c | 1 - arch/arm/mach-at91/board-yl-9200.c | 1 - arch/arm/mach-at91/include/mach/at91cap9.h | 2 -- arch/arm/mach-at91/include/mach/at91sam9g45.h | 2 -- arch/arm/mach-at91/include/mach/hardware.h | 7 ------- arch/arm/mach-at91/include/mach/memory.h | 2 -- 41 files changed, 1 insertion(+), 51 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5fd0be92f70b..f4b7dfacf2d0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -295,6 +295,7 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select CLKDEV_LOOKUP + select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 672bbd85f952..73372ca868de 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -92,7 +92,6 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = onearm_init_early, diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index 00a92a55e940..a4924de48c36 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -218,7 +218,6 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = afeb9260_init_early, diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c index a11d7093a1f9..dfa896d7d5a9 100644 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ b/arch/arm/mach-at91/board-at572d940hf_ek.c @@ -315,7 +315,6 @@ static void __init eb_board_init(void) MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at572d940hf_map_io, .init_early = eb_init_early, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 3025b905bc30..148fccb9a25a 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -198,7 +198,6 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = cam60_init_early, diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index af90569204a3..1904fdf87613 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -396,7 +396,6 @@ static void __init cap9adk_board_init(void) MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91cap9_map_io, .init_early = cap9adk_init_early, diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index dfa98f34281d..3929b1172067 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -162,7 +162,6 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = carmeva_init_early, diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 34fd892edff4..980511084fe4 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -375,7 +375,6 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260") MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = cpu9krea_init_early, diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 34c9d0c75e42..620a36ae79c4 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -175,7 +175,6 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = cpuat91_init_early, diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index a48a32ddb049..a7be81e8b910 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -257,7 +257,6 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = csb337_init_early, diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 7f0ee1cd9e8b..58a80c368652 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -138,7 +138,6 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = csb637_init_early, diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 0de1ba43c755..e9fff8030293 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -120,7 +120,6 @@ static void __init eb9200_board_init(void) } MACHINE_START(ATEB9200, "Embest ATEB9200") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = eb9200_init_early, diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index bd46395aca85..eea65eaf062a 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -168,7 +168,6 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = ecb_at91init_early, diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 6fff26df723e..90a44e5c6391 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -129,7 +129,6 @@ static void __init eco920_board_init(void) MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = eco920_init_early, diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 934542f624b6..466c063b8d21 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -154,7 +154,6 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = flexibity_init_early, diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 470a66b275ba..e2d1dc9eff45 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -266,7 +266,6 @@ static void __init foxg20_board_init(void) MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = foxg20_init_early, diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 2b409decaae8..1d4f36b3cb27 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -576,7 +576,6 @@ static void __init gsia18s_board_init(void) } MACHINE_START(GSIA18S, "GS_IA18_S") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = gsia18s_init_early, diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 49557d3be95b..4f17a1c98f2e 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -94,7 +94,6 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = kafa_init_early, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index fca061a7370f..39247fae5171 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -136,7 +136,6 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = kb9202_init_early, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 004b76da64f5..961e805db68c 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -387,7 +387,6 @@ static void __init neocore926_board_init(void) MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9263_map_io, .init_early = neocore926_init_early, diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index df1ed7e2806b..21a21af25878 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -222,7 +222,6 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = pcontrol_g20_init_early, diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 97372f692593..8294eae1e664 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -123,7 +123,6 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = picotux200_init_early, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 5822d8ea4719..d1a6001b0bd8 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -268,7 +268,6 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 4f04f284dcb1..b90d0f9ade32 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -227,7 +227,6 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = dk_init_early, diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index cf161c54ee07..51c266807b1e 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -193,7 +193,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index b925ba99abc2..aaf1bf0989b3 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -212,7 +212,6 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index b1a358492d88..d600dc123227 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -353,7 +353,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 57d243445b53..f897f84d43dc 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -620,7 +620,6 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9261_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 232634dc17cf..605b26f40a4c 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -451,7 +451,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9263_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 0a24f3f687c8..7624cf0d006b 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -403,7 +403,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, @@ -413,7 +412,6 @@ MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 645c97063c7a..063c95d0e8f0 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -421,7 +421,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9g45_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 102f86210607..effb399a80a6 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -329,7 +329,6 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9rl_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index ad956286aeab..3eb0a1153cc8 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -178,7 +178,6 @@ static void __init snapper9260_board_init(void) } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = snapper9260_init_early, diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 38515e4d1fb5..5e5c85688f5f 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -298,7 +298,6 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = portuxg20_init_early, @@ -308,7 +307,6 @@ MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = stamp9g20evb_init_early, diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index a0c17d5a6477..0e784e6fedec 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -228,7 +228,6 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9260_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index 5356af7e87e2..cf626dd14b2c 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -244,7 +244,6 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, .map_io = at91sam9263_map_io, .init_early = ek_init_early, diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 8f9ea5aa6719..167337ff79c8 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -594,7 +594,6 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, .map_io = at91rm9200_map_io, .init_early = yl9200_init_early, diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index a043bce8da97..665993849a7b 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -121,6 +121,4 @@ #define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ #define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 520b14b9cfe9..659304aa73d9 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -129,8 +129,6 @@ #define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ #define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #define CONSISTENT_DMA_SIZE SZ_4M /* diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 352246407f72..469d3af5a551 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -88,13 +88,6 @@ #define AT91_CHIPSELECT_6 0x70000000 #define AT91_CHIPSELECT_7 0x80000000 -/* SDRAM */ -#ifdef CONFIG_DRAM_BASE -#define AT91_SDRAM_BASE CONFIG_DRAM_BASE -#else -#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 -#endif - /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h index c2cfe5040642..401c207f2f39 100644 --- a/arch/arm/mach-at91/include/mach/memory.h +++ b/arch/arm/mach-at91/include/mach/memory.h @@ -23,6 +23,4 @@ #include -#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE) - #endif -- cgit v1.2.3 From e57556e3b6dcbf9b459cd503b061457b6ed1758f Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 24 Apr 2011 11:40:22 +0800 Subject: at91rm9200: introduce at91rm9200_set_type to specficy cpu package as we can not detect it by defaut the type will be bga introduce cpu_is_at91rm9200_bga and cpu_is_at91rm9200_pqfp Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez --- arch/arm/mach-at91/at91rm9200.c | 13 +++++++++++-- arch/arm/mach-at91/board-1arm.c | 6 +++++- arch/arm/mach-at91/board-carmeva.c | 2 +- arch/arm/mach-at91/board-cpuat91.c | 6 +++++- arch/arm/mach-at91/board-csb337.c | 2 +- arch/arm/mach-at91/board-csb637.c | 2 +- arch/arm/mach-at91/board-eb9200.c | 2 +- arch/arm/mach-at91/board-ecbat91.c | 6 +++++- arch/arm/mach-at91/board-eco920.c | 7 ++++++- arch/arm/mach-at91/board-kafa.c | 6 +++++- arch/arm/mach-at91/board-kb9202.c | 7 +++++-- arch/arm/mach-at91/board-picotux200.c | 2 +- arch/arm/mach-at91/board-rm9200dk.c | 2 +- arch/arm/mach-at91/board-rm9200ek.c | 2 +- arch/arm/mach-at91/board-yl-9200.c | 6 +++++- arch/arm/mach-at91/generic.h | 3 ++- arch/arm/mach-at91/include/mach/cpu.h | 7 +++++++ 17 files changed, 63 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index d3638bd994da..b228ce9e21a1 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "generic.h" #include "clock.h" @@ -303,6 +304,13 @@ static void at91rm9200_reset(void) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } +int rm9200_type; +EXPORT_SYMBOL(rm9200_type); + +void __init at91rm9200_set_type(int type) +{ + rm9200_type = type; +} /* -------------------------------------------------------------------- * AT91RM9200 processor initialization @@ -313,7 +321,7 @@ void __init at91rm9200_map_io(void) iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); } -void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +void __init at91rm9200_initialize(unsigned long main_clock) { at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) @@ -328,7 +336,8 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks at91rm9200_register_clocks(); /* Initialize GPIO subsystem */ - at91_gpio_init(at91rm9200_gpio, banks); + at91_gpio_init(at91rm9200_gpio, + cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); } diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 73372ca868de..ab1d463aa47d 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -35,14 +35,18 @@ #include #include +#include #include "generic.h" static void __init onearm_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 3929b1172067..f36b18687494 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -43,7 +43,7 @@ static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ - at91rm9200_initialize(20000000, AT91RM9200_BGA); + at91rm9200_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 620a36ae79c4..6daabe3907a1 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "generic.h" @@ -52,8 +53,11 @@ static struct gpio_led cpuat91_leds[] = { static void __init cpuat91_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index a7be81e8b910..d98bcec1dfe0 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -46,7 +46,7 @@ static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 58a80c368652..019aab4e20b0 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -43,7 +43,7 @@ static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index e9fff8030293..e9484535cbc8 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -43,7 +43,7 @@ static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index eea65eaf062a..a6f57faa10a7 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -38,14 +38,18 @@ #include #include +#include #include "generic.h" static void __init ecb_at91init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 90a44e5c6391..bfc0062d1483 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -26,11 +26,16 @@ #include #include +#include + #include "generic.h" static void __init eco920_init_early(void) { - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 4f17a1c98f2e..9b003ff744ba 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -35,14 +35,18 @@ #include #include +#include #include "generic.h" static void __init kafa_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 39247fae5171..a813a74b65f9 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -36,7 +36,7 @@ #include #include - +#include #include #include "generic.h" @@ -44,8 +44,11 @@ static void __init kb9202_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 10 MHz crystal */ - at91rm9200_initialize(10000000, AT91RM9200_PQFP); + at91rm9200_initialize(10000000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 8294eae1e664..756cc2a745dd 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -46,7 +46,7 @@ static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index b90d0f9ade32..aef9627710b0 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -48,7 +48,7 @@ static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 51c266807b1e..015a02183080 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -48,7 +48,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 167337ff79c8..c208cc334d7d 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -45,14 +45,18 @@ #include #include #include +#include #include "generic.h" static void __init yl9200_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index ecba94ee520b..5783bd1b6c40 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -22,7 +22,8 @@ extern void __init at91cap9_map_io(void); extern void __init at572d940hf_map_io(void); /* Processors */ -extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); +extern void __init at91rm9200_set_type(int type); +extern void __init at91rm9200_initialize(unsigned long main_clock); extern void __init at91sam9260_initialize(unsigned long main_clock); extern void __init at91sam9261_initialize(unsigned long main_clock); extern void __init at91sam9263_initialize(unsigned long main_clock); diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 0700f2125305..ab00372ca045 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -90,9 +90,16 @@ static inline unsigned long at91cap9_rev_identify(void) #endif #ifdef CONFIG_ARCH_AT91RM9200 +extern int rm9200_type; +#define ARCH_REVISON_9200_BGA (0 << 0) +#define ARCH_REVISON_9200_PQFP (1 << 0) #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) +#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp()) +#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP) #else #define cpu_is_at91rm9200() (0) +#define cpu_is_at91rm9200_bga() (0) +#define cpu_is_at91rm9200_pqfp() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9260 -- cgit v1.2.3 From 7a2207a0e1142a9b214b323e43ab2ecc592e5b0e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 17 May 2011 20:51:14 +0800 Subject: at91: drop at572d940hf support no-one use it and it's nearly impossible get a board to work on it and the Mainline implementation was never finished Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Cc: Nicolas Ferre Cc: Patrice Vilchez Cc: Andrew Victor --- arch/arm/configs/at572d940hfek_defconfig | 358 -------- arch/arm/mach-at91/Kconfig | 21 - arch/arm/mach-at91/Makefile | 4 - arch/arm/mach-at91/at572d940hf.c | 412 --------- arch/arm/mach-at91/at572d940hf_devices.c | 964 --------------------- arch/arm/mach-at91/board-at572d940hf_ek.c | 323 ------- arch/arm/mach-at91/clock.c | 2 +- arch/arm/mach-at91/generic.h | 4 - arch/arm/mach-at91/include/mach/at572d940hf.h | 121 --- .../mach-at91/include/mach/at572d940hf_matrix.h | 123 --- arch/arm/mach-at91/include/mach/board.h | 5 +- arch/arm/mach-at91/include/mach/cpu.h | 8 - arch/arm/mach-at91/include/mach/hardware.h | 2 - arch/arm/mach-at91/include/mach/timex.h | 5 - 14 files changed, 2 insertions(+), 2350 deletions(-) delete mode 100644 arch/arm/configs/at572d940hfek_defconfig delete mode 100644 arch/arm/mach-at91/at572d940hf.c delete mode 100644 arch/arm/mach-at91/at572d940hf_devices.c delete mode 100644 arch/arm/mach-at91/board-at572d940hf_ek.c delete mode 100644 arch/arm/mach-at91/include/mach/at572d940hf.h delete mode 100644 arch/arm/mach-at91/include/mach/at572d940hf_matrix.h diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig deleted file mode 100644 index 1b1158ae8f82..000000000000 --- a/arch/arm/configs/at572d940hfek_defconfig +++ /dev/null @@ -1,358 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-AT572D940HF" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_AUDIT=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT572D940HF=y -CONFIG_MACH_AT572D940HFEB=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_NET_PKTGEN=m -CONFIG_NET_TCPPROBE=m -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_VCAN=m -CONFIG_CAN_DEBUG_DEVICES=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CONNECTOR=m -CONFIG_MTD=m -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_CONCAT=m -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_DATAFLASH=m -CONFIG_MTD_M25P80=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTD_BLOCK2MTD=m -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_DISKONCHIP=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_ALAUDA=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=m -CONFIG_SENSORS_TSL2550=m -CONFIG_DS1682=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_VETH=m -CONFIG_PHYLIB=y -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_ICPLUS_PHY=m -CONFIG_MDIO_BITBANG=m -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_RAW=m -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_N_HDLC=m -CONFIG_SPECIALIX=m -CONFIG_STALDRV=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_R3964=m -CONFIG_RAW_DRIVER=m -CONFIG_TCG_TPM=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_BITBANG=m -CONFIG_SPI_SPIDEV=m -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_PCM_OSS_PLUGINS is not set -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_HID=m -CONFIG_HIDRAW=y -CONFIG_USB_HID=m -CONFIG_USB_HIDDEV=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GYRATION=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_PANTHERLORD=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_SERIAL=m -CONFIG_USB_EZUSB=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_DEBUG=m -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_TEST=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_MMC=y -CONFIG_SDIO_UART=m -CONFIG_MMC_AT91=m -CONFIG_MMC_SPI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_DS1307=m -CONFIG_RTC_DRV_DS1305=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD_DEBUG=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_CHECK=y -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_CRAMFS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -CONFIG_SGI_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 8cbc3aae6c64..22484670e7ba 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -82,11 +82,6 @@ config ARCH_AT91CAP9 select HAVE_FB_ATMEL select HAVE_NET_MACB -config ARCH_AT572D940HF - bool "AT572D940HF" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - config ARCH_AT91X40 bool "AT91x40" select ARCH_USES_GETTIMEOFFSET @@ -431,22 +426,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT572D940HF - -comment "AT572D940HF Board Type" - -config MACH_AT572D940HFEB - bool "AT572D940HF-EK" - depends on ARCH_AT572D940HF - select HAVE_AT91_DATAFLASH_CARD - help - Select this if you are using Atmel's AT572D940HF-EK evaluation kit. - - -endif - -# ---------------------------------------------------------- - if ARCH_AT91X40 comment "AT91X40 Board Type" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a83835e0c185..96966231920c 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devi obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -78,9 +77,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o -# AT572D940HF board-specific support -obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o - # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c deleted file mode 100644 index d06990777ffe..000000000000 --- a/arch/arm/mach-at91/at572d940hf.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf.c - * - * Antonio R. Costa - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include - -#include -#include -#include -#include -#include -#include - -#include "generic.h" -#include "clock.h" - -static struct map_desc at572d940hf_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE, - .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE), - .length = AT572D940HF_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "macb_clk", - .pmc_mask = 1 << AT572D940HF_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT572D940HF_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT572D940HF_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT572D940HF_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT572D940HF_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT572D940HF_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc2_clk = { - .name = "ssc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT572D940HF_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc3_clk = { - .name = "ssc3_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can0_clk = { - .name = "can0_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can1_clk = { - .name = "can1_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mAgicV_clk = { - .name = "mAgicV_clk", - .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0, - .type = CLK_TYPE_PERIPHERAL, -}; - - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &macb_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc_clk, - &udc_clk, - &twi0_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &ohci_clk, - &ssc3_clk, - &twi1_clk, - &can0_clk, - &can1_clk, - &mAgicV_clk, - /* irq0 .. irq2 */ -}; - -static struct clk_lookup periph_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), - CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), - CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), - CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), -}; - -static struct clk_lookup usart_clocks_lookups[] = { - CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), - CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), -}; - -/* - * The five programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static struct clk mAgicV_mem_clk = { - .name = "mAgicV_mem_clk", - .pmc_mask = AT91_PMC_PCK4, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 4, -}; - -/* HClocks */ -static struct clk hck0 = { - .name = "hck0", - .pmc_mask = AT91_PMC_HCK0, - .type = CLK_TYPE_SYSTEM, - .id = 0, -}; -static struct clk hck1 = { - .name = "hck1", - .pmc_mask = AT91_PMC_HCK1, - .type = CLK_TYPE_SYSTEM, - .id = 1, -}; - -static void __init at572d940hf_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clkdev_add_table(periph_clocks_lookups, - ARRAY_SIZE(periph_clocks_lookups)); - clkdev_add_table(usart_clocks_lookups, - ARRAY_SIZE(usart_clocks_lookups)); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); - clk_register(&mAgicV_mem_clk); - - clk_register(&hck0); - clk_register(&hck1); -} - -static struct clk_lookup console_clock_lookup; - -void __init at572d940hf_set_console_clock(int id) -{ - if (id >= ARRAY_SIZE(usart_clocks_lookups)) - return; - - console_clock_lookup.con_id = "usart"; - console_clock_lookup.clk = usart_clocks_lookups[id].clk; - clkdev_add(&console_clock_lookup); -} - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at572d940hf_gpio[] = { - { - .id = AT572D940HF_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, - }, { - .id = AT572D940HF_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, - }, { - .id = AT572D940HF_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, - } -}; - -static void at572d940hf_reset(void) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - - -/* -------------------------------------------------------------------- - * AT572D940HF processor initialization - * -------------------------------------------------------------------- */ - -void __init at572d940hf_map_io(void) -{ - /* Map peripherals */ - iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc)); -} - -void __init at572d940hf_initialize(unsigned long main_clock) -{ - at91_arch_reset = at572d940hf_reset; - at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1) - | (1 << AT572D940HF_ID_IRQ2); - - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at572d940hf_register_clocks(); - - /* Register GPIO subsystem */ - at91_gpio_init(at572d940hf_gpio, 3); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 3, /* Ethernet */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface 0 */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 3, /* USB Host port */ - 3, /* Serial Synchronous Controller 3 */ - 0, /* Two-Wire Interface 1 */ - 0, /* CAN Controller 0 */ - 0, /* CAN Controller 1 */ - 0, /* mAgicV HALT line */ - 0, /* mAgicV SIRQ0 line */ - 0, /* mAgicV exception line */ - 0, /* mAgicV end of DMA line */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ -}; - -void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at572d940hf_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c deleted file mode 100644 index 14863b8e7e6a..000000000000 --- a/arch/arm/mach-at91/at572d940hf_devices.c +++ /dev/null @@ -1,964 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf_devices.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa - * Copyright (C) 2005 Thibaut VARENE - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -#include "generic.h" -#include "sam9_smc.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT572D940HF_UHP_BASE, - .end = AT572D940HF_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UHP, - .end = AT572D940HF_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - if (!data) - return; - - usbh_data = *data; - platform_device_register(&at572d940hf_usbh_device); - -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_USB_GADGET_AT91 -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_UDP, - .end = AT572D940HF_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UDP, - .end = AT572D940HF_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (data->vbus_pin) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally */ - - udc_data = *data; - platform_device_register(&at572d940hf_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT572D940HF_BASE_EMAC, - .end = AT572D940HF_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_EMAC, - .end = AT572D940HF_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct at91_eth_data *data) -{ - if (!data) - return; - - if (data->phy_irq_pin) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Only RMII is supported */ - data->is_rmii = 1; - - /* Pins used for RMII */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */ - - eth_data = *data; - platform_device_register(&at572d940hf_eth_device); -} -#else -void __init at91_add_device_eth(struct at91_eth_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_MCI, - .end = AT572D940HF_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_MCI, - .end = AT572D940HF_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_mmc_device = { - .name = "at91_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (data->det_pin) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (data->wp_pin) - at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PC22, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PC23, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PC24, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PC25, 1); - at91_set_A_periph(AT91_PIN_PC26, 1); - at91_set_A_periph(AT91_PIN_PC27, 1); - } - - mmc_data = *data; - platform_device_register(&at572d940hf_mmc_device); -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (data->enable_pin) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (data->rdy_pin) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (data->det_pin) - at91_set_gpio_input(data->det_pin, 1); - - at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */ - at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */ - at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */ - - nand_data = *data; - platform_device_register(&at572d940hf_nand_device); -} - -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ - -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PC7, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PC8, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at572d940hf_twi_device { - .name = "i2c-gpio", - .id = -1, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI0, - .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI0, - .end = AT572D940HF_ID_TWI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi0_device = { - .name = "at91_i2c", - .id = 0, - .resource = twi0_resources, - .num_resources = ARRAY_SIZE(twi0_resources), -}; - -static struct resource twi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI1, - .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI1, - .end = AT572D940HF_ID_TWI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi1_device = { - .name = "at91_i2c", - .id = 1, - .resource = twi1_resources, - .num_resources = ARRAY_SIZE(twi1_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI0 interface */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - /* pins used for TWI1 interface */ - at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC20, 1); - - at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC21, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi0_device); - platform_device_register(&at572d940hf_twi1_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI0, - .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI0, - .end = AT572D940HF_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI1, - .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI1, - .end = AT572D940HF_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - platform_device_register(&at572d940hf_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */ - - platform_device_register(&at572d940hf_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter blocks - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TCB, - .end = AT572D940HF_BASE_TCB + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TC0, - .end = AT572D940HF_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AT572D940HF_ID_TC1, - .end = AT572D940HF_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = AT572D940HF_ID_TC2, - .end = AT572D940HF_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - platform_device_register(&at572d940hf_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), -}; - -static void __init at91_add_device_rtt(void) -{ - platform_device_register(&at572d940hf_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct platform_device at572d940hf_wdt_device = { - .name = "at91_wdt", - .id = -1, - .num_resources = 0, -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at572d940hf_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US0, - .end = AT572D940HF_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US0, - .end = AT572D940HF_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US1, - .end = AT572D940HF_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US1, - .end = AT572D940HF_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US2, - .end = AT572D940HF_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US2, - .end = AT572D940HF_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - struct atmel_uart_data *pdata; - - switch (id) { - case 0: /* DBGU */ - pdev = &at572d940hf_dbgu_device; - configure_dbgu_pins(); - break; - case AT572D940HF_ID_US0: - pdev = &at572d940hf_uart0_device; - configure_usart0_pins(pins); - break; - case AT572D940HF_ID_US1: - pdev = &at572d940hf_uart1_device; - configure_usart1_pins(pins); - break; - case AT572D940HF_ID_US2: - pdev = &at572d940hf_uart2_device; - configure_usart2_pins(pins); - break; - default: - return; - } - pdata = pdev->dev.platform_data; - pdata->num = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) { - atmel_default_console_device = at91_uarts[portnr]; - at572d940hf_set_console_clock(portnr); - } -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- - * mAgic - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_MAGICV -static struct resource mAgic_resources[] = { - { - .start = AT91_MAGIC_PM_BASE, - .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_I_BASE, - .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_F_BASE, - .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_DB_BASE, - .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_REGS_BASE, - .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_EXTPAGE_BASE, - .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT572D940HF_ID_MSIRQ0, - .end = AT572D940HF_ID_MSIRQ0, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MHALT, - .end = AT572D940HF_ID_MHALT, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEXC, - .end = AT572D940HF_ID_MEXC, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEDMA, - .end = AT572D940HF_ID_MEDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mAgic_device = { - .name = "mAgic", - .id = -1, - .num_resources = ARRAY_SIZE(mAgic_resources), - .resource = mAgic_resources, -}; - -void __init at91_add_device_mAgic(void) -{ - platform_device_register(&mAgic_device); -} -#else -void __init at91_add_device_mAgic(void) {} -#endif - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c deleted file mode 100644 index dfa896d7d5a9..000000000000 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ /dev/null @@ -1,323 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-at572d940hf_ek.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init eb_init_early(void) -{ - /* Initialize processor: 12.500 MHz crystal */ - at572d940hf_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US0, 1, 0); - - /* USART1 on ttyS2. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US1, 2, 0); - - /* USART2 on ttyS3. (Tx & Rx only */ - at91_register_uart(AT572D940HF_ID_US2, 3, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init eb_init_irq(void) -{ - at572d940hf_init_interrupts(NULL); -} - - -/* - * USB Host Port - */ -static struct at91_usbh_data __initdata eb_usbh_data = { - .ports = 2, -}; - - -/* - * USB Device Port - */ -static struct at91_udc_data __initdata eb_udc_data = { - .vbus_pin = 0, /* no VBUS detection,UDC always on */ - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata eb_mmc_data = { - .wire4 = 1, -/* .det_pin = ... not connected */ -/* .wp_pin = ... not connected */ -/* .vcc_pin = ... not connected */ -}; - - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata eb_eth_data = { - .phy_irq_pin = AT91_PIN_PB25, - .is_rmii = 1, -}; - -/* - * NOR flash - */ - -static struct mtd_partition eb_nor_partitions[] = { - { - .name = "Raw Environment", - .offset = 0, - .size = SZ_4M, - .mask_flags = 0, - }, - { - .name = "OS FS", - .offset = MTDPART_OFS_APPEND, - .size = 3 * SZ_1M, - .mask_flags = 0, - }, - { - .name = "APP FS", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static void nor_flash_set_vpp(struct map_info* mi, int i) { -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 4, - .parts = eb_nor_partitions, - .nr_parts = ARRAY_SIZE(eb_nor_partitions), - .set_vpp = nor_flash_set_vpp, -}; - -static struct resource nor_flash_resources[] = { - { - .start = AT91_CHIPSELECT_0, - .end = AT91_CHIPSELECT_0 + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata eb_nor_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 1, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 7, - .nrd_pulse = 7, - .ncs_write_pulse = 7, - .nwe_pulse = 7, - - .read_cycle = 9, - .write_cycle = 9, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32, - .tdf_cycles = 1, -}; - -static void __init eb_add_device_nor(void) -{ - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, &eb_nor_smc_config); - platform_device_register(&nor_flash); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata eb_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_16M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(eb_nand_partition); - return eb_nand_partition; -} - -static struct atmel_nand_data __initdata eb_nand_data = { - .ale = 22, - .cle = 21, -/* .det_pin = ... not connected */ -/* .rdy_pin = AT91_PIN_PC16, */ - .enable_pin = AT91_PIN_PA15, - .partition_info = nand_partitions, -}; - -static struct sam9_smc_config __initdata eb_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 12, -}; - -static void __init eb_add_device_nand(void) -{ - ek_nand_data.bus_width_16 = !board_have_nand_8bit(); - /* setup bus-width (8 or 16) */ - if (eb_nand_data.bus_width_16) - eb_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - eb_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &eb_nand_smc_config); - - at91_add_device_nand(&eb_nand_data); -} - - -/* - * SPI devices - */ -static struct resource rtc_resources[] = { - [0] = { - .start = AT572D940HF_ID_IRQ1, - .end = AT572D940HF_ID_IRQ1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ds1305_platform_data ds1306_data = { - .is_ds1306 = true, - .en_1hz = false, -}; - -static struct spi_board_info eb_spi_devices[] = { - { /* RTC Dallas DS1306 */ - .modalias = "rtc-ds1305", - .chip_select = 3, - .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA, - .max_speed_hz = 500000, - .bus_num = 0, - .irq = AT572D940HF_ID_IRQ1, - .platform_data = (void *) &ds1306_data, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* Dataflash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -}; - -static void __init eb_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&eb_usbh_data); - /* USB Device */ - at91_add_device_udc(&eb_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* NOR */ - eb_add_device_nor(); - /* NAND */ - eb_add_device_nand(); - /* SPI */ - at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices)); - /* MMC */ - at91_add_device_mmc(0, &eb_mmc_data); - /* Ethernet */ - at91_add_device_eth(&eb_eth_data); - /* mAgic */ - at91_add_device_mAgic(); -} - -MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") - /* Maintainer: Atmel */ - .timer = &at91sam926x_timer, - .map_io = at572d940hf_map_io, - .init_early = eb_init_early, - .init_irq = eb_init_irq, - .init_machine = eb_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index ac103cbdbf35..61873f3aa92d 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -599,7 +599,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20() || - cpu_is_at91sam9g10() || cpu_is_at572d940hf()) { + cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; } else if (cpu_is_at91cap9()) { diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 5783bd1b6c40..8ff3418f3430 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -19,7 +19,6 @@ extern void __init at91sam9rl_map_io(void); extern void __init at91sam9g45_map_io(void); extern void __init at91x40_map_io(void); extern void __init at91cap9_map_io(void); -extern void __init at572d940hf_map_io(void); /* Processors */ extern void __init at91rm9200_set_type(int type); @@ -31,7 +30,6 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock); extern void __init at91sam9g45_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); extern void __init at91cap9_initialize(unsigned long main_clock); -extern void __init at572d940hf_initialize(unsigned long main_clock); /* Interrupts */ extern void __init at91rm9200_init_interrupts(unsigned int priority[]); @@ -42,7 +40,6 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91cap9_init_interrupts(unsigned int priority[]); -extern void __init at572d940hf_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ @@ -65,7 +62,6 @@ extern void __init at91sam9263_set_console_clock(int id); extern void __init at91sam9rl_set_console_clock(int id); extern void __init at91sam9g45_set_console_clock(int id); extern void __init at91cap9_set_console_clock(int id); -extern void __init at572d940hf_set_console_clock(int id); struct device; /* Power Management */ diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h deleted file mode 100644 index a738dc7e5d44..000000000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * include/mach/at572d940hf.h - * - * Antonio R. Costa - * Copyright (C) 2008 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef AT572D940HF_H -#define AT572D940HF_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */ -#define AT572D940HF_ID_US0 6 /* USART 0 */ -#define AT572D940HF_ID_US1 7 /* USART 1 */ -#define AT572D940HF_ID_US2 8 /* USART 2 */ -#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */ -#define AT572D940HF_ID_UDP 10 /* USB Device Port */ -#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */ -#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */ -#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */ -#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */ -#define AT572D940HF_ID_UHP 20 /* USB Host port */ -#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */ -#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */ -#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */ -#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */ -#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */ -#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */ -#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */ -#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */ -#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */ -#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */ -#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT572D940HF_BASE_TCB 0xfffa0000 -#define AT572D940HF_BASE_TC0 0xfffa0000 -#define AT572D940HF_BASE_TC1 0xfffa0040 -#define AT572D940HF_BASE_TC2 0xfffa0080 -#define AT572D940HF_BASE_UDP 0xfffa4000 -#define AT572D940HF_BASE_MCI 0xfffa8000 -#define AT572D940HF_BASE_TWI0 0xfffac000 -#define AT572D940HF_BASE_US0 0xfffb0000 -#define AT572D940HF_BASE_US1 0xfffb4000 -#define AT572D940HF_BASE_US2 0xfffb8000 -#define AT572D940HF_BASE_SSC0 0xfffbc000 -#define AT572D940HF_BASE_SSC1 0xfffc0000 -#define AT572D940HF_BASE_SSC2 0xfffc4000 -#define AT572D940HF_BASE_SPI0 0xfffc8000 -#define AT572D940HF_BASE_SPI1 0xfffcc000 -#define AT572D940HF_BASE_SSC3 0xfffd0000 -#define AT572D940HF_BASE_TWI1 0xfffd4000 -#define AT572D940HF_BASE_EMAC 0xfffd8000 -#define AT572D940HF_BASE_CAN0 0xfffdc000 -#define AT572D940HF_BASE_CAN1 0xfffe0000 -#define AT91_BASE_SYS 0xffffea00 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) - -#define AT91_USART0 AT572D940HF_ID_US0 -#define AT91_USART1 AT572D940HF_ID_US1 -#define AT91_USART2 AT572D940HF_ID_US2 - - -/* - * Internal Memory. - */ -#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */ - -#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h deleted file mode 100644 index b6751df09488..000000000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/mach//at572d940hf_matrix.h - * - * Antonio R. Costa - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef AT572D940HF_MATRIX_H -#define AT572D940HF_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ - -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ - -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */ -#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */ -#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */ -#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */ -#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */ -#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */ -#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */ -#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */ -#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */ -#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */ -#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */ -#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */ -#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */ -#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */ -#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */ -#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */ - - -/* - * The following registers / bits are not defined in the Datasheet (Revision A) - */ - -#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index c44e94e22857..ed544a0d5a1d 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -90,7 +90,7 @@ struct at91_eth_data { extern void __init at91_add_device_eth(struct at91_eth_data *data); #if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF) + || defined(CONFIG_ARCH_AT91SAM9G45) #define eth_platform_data at91_eth_data #endif @@ -204,9 +204,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); - /* AT572D940HF DSP */ -extern void __init at91_add_device_mAgic(void); - /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index ab00372ca045..df966c2bc2d4 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -34,8 +34,6 @@ #define ARCH_ID_AT91SAM9XE256 0x329a93a0 #define ARCH_ID_AT91SAM9XE512 0x329aa3a0 -#define ARCH_ID_AT572D940HF 0x0e0303e0 - #define ARCH_ID_AT91M40800 0x14080044 #define ARCH_ID_AT91R40807 0x44080746 #define ARCH_ID_AT91M40807 0x14080745 @@ -188,12 +186,6 @@ extern int rm9200_type; #define cpu_is_at91cap9_revC() (0) #endif -#ifdef CONFIG_ARCH_AT572D940HF -#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF) -#else -#define cpu_is_at572d940hf() (0) -#endif - /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 469d3af5a551..1008b9fb5074 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -32,8 +32,6 @@ #include #elif defined(CONFIG_ARCH_AT91X40) #include -#elif defined(CONFIG_ARCH_AT572D940HF) -#include #else #error "Unsupported AT91 processor" #endif diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h index 05a6e8af80c4..31ac2d97f14c 100644 --- a/arch/arm/mach-at91/include/mach/timex.h +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -82,11 +82,6 @@ #define AT91X40_MASTER_CLOCK 40000000 #define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) -#elif defined(CONFIG_ARCH_AT572D940HF) - -#define AT572D940HF_MASTER_CLOCK 80000000 -#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16) - #endif #endif -- cgit v1.2.3 From 8c127f0717b438e6abc3d92d4ae248c4224b9dcb Mon Sep 17 00:00:00 2001 From: Hans Petter Selasky Date: Wed, 25 May 2011 09:24:32 -0700 Subject: Input: properly assign return value of clamp() macro. [dtor@mail.ru: added mousedev changes] Signed-off-by: Hans Petter Selasky Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/input.c | 2 +- drivers/input/mousedev.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/input/input.c b/drivers/input/input.c index 75e11c7b70fd..da38d97a51b1 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -1756,7 +1756,7 @@ static unsigned int input_estimate_events_per_packet(struct input_dev *dev) } else if (test_bit(ABS_MT_TRACKING_ID, dev->absbit)) { mt_slots = dev->absinfo[ABS_MT_TRACKING_ID].maximum - dev->absinfo[ABS_MT_TRACKING_ID].minimum + 1, - clamp(mt_slots, 2, 32); + mt_slots = clamp(mt_slots, 2, 32); } else if (test_bit(ABS_MT_POSITION_X, dev->absbit)) { mt_slots = 2; } else { diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c index 257e033986e4..0110b5a3a167 100644 --- a/drivers/input/mousedev.c +++ b/drivers/input/mousedev.c @@ -187,7 +187,7 @@ static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev, if (size == 0) size = xres ? : 1; - clamp(value, min, max); + value = clamp(value, min, max); mousedev->packet.x = ((value - min) * xres) / size; mousedev->packet.abs_event = 1; @@ -201,7 +201,7 @@ static void mousedev_abs_event(struct input_dev *dev, struct mousedev *mousedev, if (size == 0) size = yres ? : 1; - clamp(value, min, max); + value = clamp(value, min, max); mousedev->packet.y = yres - ((value - min) * yres) / size; mousedev->packet.abs_event = 1; -- cgit v1.2.3 From b2e5cd33b598fb496b9366c445bd77c801efabb8 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Wed, 25 May 2011 13:35:34 +0400 Subject: CIFS: Fix undefined behavior when mount fails Fix double kfree() calls on the same pointers and cleanup mount code. Reviewed-and-Tested-by: Jeff Layton Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 44 +++++++++++++++++--------------------------- 1 file changed, 17 insertions(+), 27 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 131afadce0e0..d1ed7f9946d5 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -104,29 +104,23 @@ cifs_sb_deactive(struct super_block *sb) } static int -cifs_read_super(struct super_block *sb, struct cifs_sb_info *cifs_sb, - void *data, struct smb_vol *volume_info, const char *devname, - int silent) +cifs_read_super(struct super_block *sb, struct smb_vol *volume_info, + const char *devname, int silent) { struct inode *inode; + struct cifs_sb_info *cifs_sb; int rc = 0; - /* BB should we make this contingent on mount parm? */ - sb->s_flags |= MS_NODIRATIME | MS_NOATIME; - sb->s_fs_info = cifs_sb; + cifs_sb = CIFS_SB(sb); spin_lock_init(&cifs_sb->tlink_tree_lock); cifs_sb->tlink_tree = RB_ROOT; rc = bdi_setup_and_register(&cifs_sb->bdi, "cifs", BDI_CAP_MAP_COPY); - if (rc) { - kfree(cifs_sb); + if (rc) return rc; - } - cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages; - if (data) - cifs_sb->mountdata = data; + cifs_sb->bdi.ra_pages = default_backing_dev_info.ra_pages; rc = cifs_mount(sb, cifs_sb, volume_info, devname); @@ -179,15 +173,7 @@ out_no_root: cifs_umount(sb, cifs_sb); out_mount_failed: - if (cifs_sb) { - if (cifs_sb->mountdata) { - kfree(cifs_sb->mountdata); - cifs_sb->mountdata = NULL; - } - unload_nls(cifs_sb->local_nls); - bdi_destroy(&cifs_sb->bdi); - kfree(cifs_sb); - } + bdi_destroy(&cifs_sb->bdi); return rc; } @@ -553,7 +539,6 @@ cifs_do_mount(struct file_system_type *fs_type, struct cifs_sb_info *cifs_sb; struct smb_vol *volume_info; struct dentry *root; - char *copied_data = NULL; cFYI(1, "Devname: %s flags: %d ", dev_name, flags); @@ -576,20 +561,23 @@ cifs_do_mount(struct file_system_type *fs_type, goto out; } - sb->s_flags = flags; - /* * Copy mount params for use in submounts. Better to do * the copy here and deal with the error before cleanup gets * complicated post-mount. */ - copied_data = kstrndup(data, PAGE_SIZE, GFP_KERNEL); - if (copied_data == NULL) { + cifs_sb->mountdata = kstrndup(data, PAGE_SIZE, GFP_KERNEL); + if (cifs_sb->mountdata == NULL) { root = ERR_PTR(-ENOMEM); goto err_out; } - rc = cifs_read_super(sb, cifs_sb, copied_data, volume_info, dev_name, + sb->s_flags = flags; + /* BB should we make this contingent on mount parm? */ + sb->s_flags |= MS_NODIRATIME | MS_NOATIME; + sb->s_fs_info = cifs_sb; + + rc = cifs_read_super(sb, volume_info, dev_name, flags & MS_SILENT ? 1 : 0); if (rc) { root = ERR_PTR(rc); @@ -604,6 +592,8 @@ out: return root; err_out: + kfree(cifs_sb->mountdata); + unload_nls(cifs_sb->local_nls); kfree(cifs_sb); deactivate_locked_super(sb); cifs_cleanup_volume_info(&volume_info); -- cgit v1.2.3 From c3d17b63e5eafcaf2678c11de801c189468631c8 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 19 May 2011 16:22:57 -0400 Subject: cifs: convert cifs_writepages to use async writes Have cifs_writepages issue asynchronous writes instead of waiting on each write call to complete before issuing another. This also allows us to return more quickly from writepages. It can just send out all of the I/Os and not wait around for the replies. In the WB_SYNC_ALL case, if the write completes with a retryable error, then the completion workqueue job will resend the write. This also changes the page locking semantics a little bit. Instead of holding the page lock until the response is received, release it after doing the send. This will reduce contention for the page lock and should prevent processes that have the file mmap'ed from being blocked unnecessarily. Signed-off-by: Jeff Layton Reviewed-and-Tested-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/file.c | 241 ++++++++++++++++++++++++--------------------------------- 1 file changed, 99 insertions(+), 142 deletions(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index c672afef0c09..00b926ce7935 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1092,58 +1092,20 @@ static int cifs_partialpagewrite(struct page *page, unsigned from, unsigned to) static int cifs_writepages(struct address_space *mapping, struct writeback_control *wbc) { - unsigned int bytes_to_write; - unsigned int bytes_written; - struct cifs_sb_info *cifs_sb; - int done = 0; - pgoff_t end; - pgoff_t index; - int range_whole = 0; - struct kvec *iov; - int len; - int n_iov = 0; - pgoff_t next; - int nr_pages; - __u64 offset = 0; - struct cifsFileInfo *open_file; - struct cifsTconInfo *tcon; - struct cifsInodeInfo *cifsi = CIFS_I(mapping->host); + struct cifs_sb_info *cifs_sb = CIFS_SB(mapping->host->i_sb); + bool done = false, scanned = false, range_whole = false; + pgoff_t end, index; + struct cifs_writedata *wdata; struct page *page; - struct pagevec pvec; int rc = 0; - int scanned = 0; - int xid; - - cifs_sb = CIFS_SB(mapping->host->i_sb); /* - * If wsize is smaller that the page cache size, default to writing + * If wsize is smaller than the page cache size, default to writing * one page at a time via cifs_writepage */ if (cifs_sb->wsize < PAGE_CACHE_SIZE) return generic_writepages(mapping, wbc); - iov = kmalloc(32 * sizeof(struct kvec), GFP_KERNEL); - if (iov == NULL) - return generic_writepages(mapping, wbc); - - /* - * if there's no open file, then this is likely to fail too, - * but it'll at least handle the return. Maybe it should be - * a BUG() instead? - */ - open_file = find_writable_file(CIFS_I(mapping->host), false); - if (!open_file) { - kfree(iov); - return generic_writepages(mapping, wbc); - } - - tcon = tlink_tcon(open_file->tlink); - cifsFileInfo_put(open_file); - - xid = GetXid(); - - pagevec_init(&pvec, 0); if (wbc->range_cyclic) { index = mapping->writeback_index; /* Start from prev offset */ end = -1; @@ -1151,24 +1113,49 @@ static int cifs_writepages(struct address_space *mapping, index = wbc->range_start >> PAGE_CACHE_SHIFT; end = wbc->range_end >> PAGE_CACHE_SHIFT; if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX) - range_whole = 1; - scanned = 1; + range_whole = true; + scanned = true; } retry: - while (!done && (index <= end) && - (nr_pages = pagevec_lookup_tag(&pvec, mapping, &index, - PAGECACHE_TAG_DIRTY, - min(end - index, (pgoff_t)PAGEVEC_SIZE - 1) + 1))) { - int first; - unsigned int i; - - first = -1; - next = 0; - n_iov = 0; - bytes_to_write = 0; - - for (i = 0; i < nr_pages; i++) { - page = pvec.pages[i]; + while (!done && index <= end) { + unsigned int i, nr_pages, found_pages; + pgoff_t next = 0, tofind; + struct page **pages; + + tofind = min((cifs_sb->wsize / PAGE_CACHE_SIZE) - 1, + end - index) + 1; + + wdata = cifs_writedata_alloc((unsigned int)tofind); + if (!wdata) { + rc = -ENOMEM; + break; + } + + /* + * find_get_pages_tag seems to return a max of 256 on each + * iteration, so we must call it several times in order to + * fill the array or the wsize is effectively limited to + * 256 * PAGE_CACHE_SIZE. + */ + found_pages = 0; + pages = wdata->pages; + do { + nr_pages = find_get_pages_tag(mapping, &index, + PAGECACHE_TAG_DIRTY, + tofind, pages); + found_pages += nr_pages; + tofind -= nr_pages; + pages += nr_pages; + } while (nr_pages && tofind && index <= end); + + if (found_pages == 0) { + kref_put(&wdata->refcount, cifs_writedata_release); + break; + } + + nr_pages = 0; + for (i = 0; i < found_pages; i++) { + page = wdata->pages[i]; /* * At this point we hold neither mapping->tree_lock nor * lock on the page itself: the page may be truncated or @@ -1177,7 +1164,7 @@ retry: * mapping */ - if (first < 0) + if (nr_pages == 0) lock_page(page); else if (!trylock_page(page)) break; @@ -1188,7 +1175,7 @@ retry: } if (!wbc->range_cyclic && page->index > end) { - done = 1; + done = true; unlock_page(page); break; } @@ -1215,119 +1202,89 @@ retry: set_page_writeback(page); if (page_offset(page) >= mapping->host->i_size) { - done = 1; + done = true; unlock_page(page); end_page_writeback(page); break; } - /* - * BB can we get rid of this? pages are held by pvec - */ - page_cache_get(page); + wdata->pages[i] = page; + next = page->index + 1; + ++nr_pages; + } - len = min(mapping->host->i_size - page_offset(page), - (loff_t)PAGE_CACHE_SIZE); + /* reset index to refind any pages skipped */ + if (nr_pages == 0) + index = wdata->pages[0]->index + 1; - /* reserve iov[0] for the smb header */ - n_iov++; - iov[n_iov].iov_base = kmap(page); - iov[n_iov].iov_len = len; - bytes_to_write += len; + /* put any pages we aren't going to use */ + for (i = nr_pages; i < found_pages; i++) { + page_cache_release(wdata->pages[i]); + wdata->pages[i] = NULL; + } - if (first < 0) { - first = i; - offset = page_offset(page); - } - next = page->index + 1; - if (bytes_to_write + PAGE_CACHE_SIZE > cifs_sb->wsize) - break; + /* nothing to write? */ + if (nr_pages == 0) { + kref_put(&wdata->refcount, cifs_writedata_release); + continue; } - if (n_iov) { -retry_write: - open_file = find_writable_file(CIFS_I(mapping->host), - false); - if (!open_file) { - cERROR(1, "No writable handles for inode"); - rc = -EBADF; - } else { - rc = CIFSSMBWrite2(xid, tcon, open_file->netfid, - bytes_to_write, offset, - &bytes_written, iov, n_iov, - 0); - cifsFileInfo_put(open_file); - } - cFYI(1, "Write2 rc=%d, wrote=%u", rc, bytes_written); + wdata->sync_mode = wbc->sync_mode; + wdata->nr_pages = nr_pages; + wdata->offset = page_offset(wdata->pages[0]); - /* - * For now, treat a short write as if nothing got - * written. A zero length write however indicates - * ENOSPC or EFBIG. We have no way to know which - * though, so call it ENOSPC for now. EFBIG would - * get translated to AS_EIO anyway. - * - * FIXME: make it take into account the data that did - * get written - */ - if (rc == 0) { - if (bytes_written == 0) - rc = -ENOSPC; - else if (bytes_written < bytes_to_write) - rc = -EAGAIN; + do { + if (wdata->cfile != NULL) + cifsFileInfo_put(wdata->cfile); + wdata->cfile = find_writable_file(CIFS_I(mapping->host), + false); + if (!wdata->cfile) { + cERROR(1, "No writable handles for inode"); + rc = -EBADF; + break; } + rc = cifs_async_writev(wdata); + } while (wbc->sync_mode == WB_SYNC_ALL && rc == -EAGAIN); - /* retry on data-integrity flush */ - if (wbc->sync_mode == WB_SYNC_ALL && rc == -EAGAIN) - goto retry_write; + for (i = 0; i < nr_pages; ++i) + unlock_page(wdata->pages[i]); - /* fix the stats and EOF */ - if (bytes_written > 0) { - cifs_stats_bytes_written(tcon, bytes_written); - cifs_update_eof(cifsi, offset, bytes_written); - } - - for (i = 0; i < n_iov; i++) { - page = pvec.pages[first + i]; - /* on retryable write error, redirty page */ + /* send failure -- clean up the mess */ + if (rc != 0) { + for (i = 0; i < nr_pages; ++i) { if (rc == -EAGAIN) - redirty_page_for_writepage(wbc, page); - else if (rc != 0) - SetPageError(page); - kunmap(page); - unlock_page(page); - end_page_writeback(page); - page_cache_release(page); + redirty_page_for_writepage(wbc, + wdata->pages[i]); + else + SetPageError(wdata->pages[i]); + end_page_writeback(wdata->pages[i]); + page_cache_release(wdata->pages[i]); } - if (rc != -EAGAIN) mapping_set_error(mapping, rc); - else - rc = 0; + } + kref_put(&wdata->refcount, cifs_writedata_release); - if ((wbc->nr_to_write -= n_iov) <= 0) - done = 1; - index = next; - } else - /* Need to re-find the pages we skipped */ - index = pvec.pages[0]->index + 1; + wbc->nr_to_write -= nr_pages; + if (wbc->nr_to_write <= 0) + done = true; - pagevec_release(&pvec); + index = next; } + if (!scanned && !done) { /* * We hit the last page and there is more work to be done: wrap * back to the start of the file */ - scanned = 1; + scanned = true; index = 0; goto retry; } + if (wbc->range_cyclic || (range_whole && wbc->nr_to_write > 0)) mapping->writeback_index = index; - FreeXid(xid); - kfree(iov); return rc; } -- cgit v1.2.3 From f7910cbd9fa319ee4501074f1f3b5ce23c4b1518 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 19 May 2011 16:22:58 -0400 Subject: cifs: clean up wsize negotiation and allow for larger wsize Now that we can handle larger wsizes in writepages, fix up the negotiation of the wsize to allow for that. find_get_pages only seems to give out a max of 256 pages at a time, so that gives us a reasonable default of 1M for the wsize. If the server however does not support large writes via POSIX extensions, then we cap the wsize to (128k - PAGE_CACHE_SIZE). That gives us a size that goes up to the max frame size specified in RFC1001. Finally, if CAP_LARGE_WRITE_AND_X isn't set, then further cap it to the largest size allowed by the protocol (USHRT_MAX). Signed-off-by: Jeff Layton Reviewed-and-Tested-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/connect.c | 69 +++++++++++++++++++++++++++++++++++++++---------------- 1 file changed, 49 insertions(+), 20 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 6070ba69647b..2e7a79cd2b93 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2647,23 +2647,6 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, else /* default */ cifs_sb->rsize = CIFSMaxBufSize; - if (pvolume_info->wsize > PAGEVEC_SIZE * PAGE_CACHE_SIZE) { - cERROR(1, "wsize %d too large, using 4096 instead", - pvolume_info->wsize); - cifs_sb->wsize = 4096; - } else if (pvolume_info->wsize) - cifs_sb->wsize = pvolume_info->wsize; - else - cifs_sb->wsize = min_t(const int, - PAGEVEC_SIZE * PAGE_CACHE_SIZE, - 127*1024); - /* old default of CIFSMaxBufSize was too small now - that SMB Write2 can send multiple pages in kvec. - RFC1001 does not describe what happens when frame - bigger than 128K is sent so use that as max in - conjunction with 52K kvec constraint on arch with 4K - page size */ - if (cifs_sb->rsize < 2048) { cifs_sb->rsize = 2048; /* Windows ME may prefer this */ @@ -2742,6 +2725,53 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, "mount option supported"); } +/* + * When the server supports very large writes via POSIX extensions, we can + * allow up to 2^24 - PAGE_CACHE_SIZE. + * + * Note that this might make for "interesting" allocation problems during + * writeback however (as we have to allocate an array of pointers for the + * pages). A 16M write means ~32kb page array with PAGE_CACHE_SIZE == 4096. + */ +#define CIFS_MAX_WSIZE ((1<<24) - PAGE_CACHE_SIZE) + +/* + * When the server doesn't allow large posix writes, default to a wsize of + * 128k - PAGE_CACHE_SIZE -- one page less than the largest frame size + * described in RFC1001. This allows space for the header without going over + * that by default. + */ +#define CIFS_MAX_RFC1001_WSIZE (128 * 1024 - PAGE_CACHE_SIZE) + +/* + * The default wsize is 1M. find_get_pages seems to return a maximum of 256 + * pages in a single call. With PAGE_CACHE_SIZE == 4k, this means we can fill + * a single wsize request with a single call. + */ +#define CIFS_DEFAULT_WSIZE (1024 * 1024) + +static unsigned int +cifs_negotiate_wsize(struct cifsTconInfo *tcon, struct smb_vol *pvolume_info) +{ + __u64 unix_cap = le64_to_cpu(tcon->fsUnixInfo.Capability); + struct TCP_Server_Info *server = tcon->ses->server; + unsigned int wsize = pvolume_info->wsize ? pvolume_info->wsize : + CIFS_DEFAULT_WSIZE; + + /* can server support 24-bit write sizes? (via UNIX extensions) */ + if (!tcon->unix_ext || !(unix_cap & CIFS_UNIX_LARGE_WRITE_CAP)) + wsize = min_t(unsigned int, wsize, CIFS_MAX_RFC1001_WSIZE); + + /* no CAP_LARGE_WRITE_X? Limit it to 16 bits */ + if (!(server->capabilities & CAP_LARGE_WRITE_X)) + wsize = min_t(unsigned int, wsize, USHRT_MAX); + + /* hard limit of CIFS_MAX_WSIZE */ + wsize = min_t(unsigned int, wsize, CIFS_MAX_WSIZE); + + return wsize; +} + static int is_path_accessible(int xid, struct cifsTconInfo *tcon, struct cifs_sb_info *cifs_sb, const char *full_path) @@ -3014,13 +3044,12 @@ try_mount_again: cifs_sb->rsize = 1024 * 127; cFYI(DBG2, "no very large read support, rsize now 127K"); } - if (!(tcon->ses->capabilities & CAP_LARGE_WRITE_X)) - cifs_sb->wsize = min(cifs_sb->wsize, - (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE)); if (!(tcon->ses->capabilities & CAP_LARGE_READ_X)) cifs_sb->rsize = min(cifs_sb->rsize, (tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE)); + cifs_sb->wsize = cifs_negotiate_wsize(tcon, volume_info); + remote_path_check: #ifdef CONFIG_CIFS_DFS_UPCALL /* -- cgit v1.2.3 From c28c89fc43e3f81436efc4748837534d4d46f90c Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 19 May 2011 16:22:56 -0400 Subject: cifs: add cifs_async_writev Add the ability for CIFS to do an asynchronous write. The kernel will set the frame up as it would for a "normal" SMBWrite2 request, and use cifs_call_async to send it. The mid callback will then be configured to handle the result. Reviewed-by: Pavel Shilovsky Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsproto.h | 18 ++++ fs/cifs/cifssmb.c | 236 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 254 insertions(+) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index fdc0dc2c083c..8aea8850ffee 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -442,4 +442,22 @@ extern int mdfour(unsigned char *, unsigned char *, int); extern int E_md4hash(const unsigned char *passwd, unsigned char *p16); extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8, unsigned char *p24); + +/* asynchronous write support */ +struct cifs_writedata { + struct kref refcount; + enum writeback_sync_modes sync_mode; + struct work_struct work; + struct cifsFileInfo *cfile; + __u64 offset; + unsigned int bytes; + int result; + unsigned int nr_pages; + struct page *pages[1]; +}; + +int cifs_async_writev(struct cifs_writedata *wdata); +struct cifs_writedata *cifs_writedata_alloc(unsigned int nr_pages); +void cifs_writedata_release(struct kref *refcount); + #endif /* _CIFSPROTO_H */ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index e0d24135b3c6..136df013b0aa 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include "cifspdu.h" #include "cifsglob.h" @@ -1604,6 +1605,241 @@ CIFSSMBWrite(const int xid, struct cifsTconInfo *tcon, return rc; } +void +cifs_writedata_release(struct kref *refcount) +{ + struct cifs_writedata *wdata = container_of(refcount, + struct cifs_writedata, refcount); + + if (wdata->cfile) + cifsFileInfo_put(wdata->cfile); + + kfree(wdata); +} + +/* + * Write failed with a retryable error. Resend the write request. It's also + * possible that the page was redirtied so re-clean the page. + */ +static void +cifs_writev_requeue(struct cifs_writedata *wdata) +{ + int i, rc; + struct inode *inode = wdata->cfile->dentry->d_inode; + + for (i = 0; i < wdata->nr_pages; i++) { + lock_page(wdata->pages[i]); + clear_page_dirty_for_io(wdata->pages[i]); + } + + do { + rc = cifs_async_writev(wdata); + } while (rc == -EAGAIN); + + for (i = 0; i < wdata->nr_pages; i++) { + if (rc != 0) + SetPageError(wdata->pages[i]); + unlock_page(wdata->pages[i]); + } + + mapping_set_error(inode->i_mapping, rc); + kref_put(&wdata->refcount, cifs_writedata_release); +} + +static void +cifs_writev_complete(struct work_struct *work) +{ + struct cifs_writedata *wdata = container_of(work, + struct cifs_writedata, work); + struct inode *inode = wdata->cfile->dentry->d_inode; + int i = 0; + + if (wdata->result == 0) { + cifs_update_eof(CIFS_I(inode), wdata->offset, wdata->bytes); + cifs_stats_bytes_written(tlink_tcon(wdata->cfile->tlink), + wdata->bytes); + } else if (wdata->sync_mode == WB_SYNC_ALL && wdata->result == -EAGAIN) + return cifs_writev_requeue(wdata); + + for (i = 0; i < wdata->nr_pages; i++) { + struct page *page = wdata->pages[i]; + if (wdata->result == -EAGAIN) + __set_page_dirty_nobuffers(page); + else if (wdata->result < 0) + SetPageError(page); + end_page_writeback(page); + page_cache_release(page); + } + if (wdata->result != -EAGAIN) + mapping_set_error(inode->i_mapping, wdata->result); + kref_put(&wdata->refcount, cifs_writedata_release); +} + +struct cifs_writedata * +cifs_writedata_alloc(unsigned int nr_pages) +{ + struct cifs_writedata *wdata; + + /* this would overflow */ + if (nr_pages == 0) { + cERROR(1, "%s: called with nr_pages == 0!", __func__); + return NULL; + } + + /* writedata + number of page pointers */ + wdata = kzalloc(sizeof(*wdata) + + sizeof(struct page *) * (nr_pages - 1), GFP_NOFS); + if (wdata != NULL) { + INIT_WORK(&wdata->work, cifs_writev_complete); + kref_init(&wdata->refcount); + } + return wdata; +} + +/* + * Check the midState and signature on received buffer (if any), and queue the + * workqueue completion task. + */ +static void +cifs_writev_callback(struct mid_q_entry *mid) +{ + struct cifs_writedata *wdata = mid->callback_data; + struct cifsTconInfo *tcon = tlink_tcon(wdata->cfile->tlink); + unsigned int written; + WRITE_RSP *smb = (WRITE_RSP *)mid->resp_buf; + + switch (mid->midState) { + case MID_RESPONSE_RECEIVED: + wdata->result = cifs_check_receive(mid, tcon->ses->server, 0); + if (wdata->result != 0) + break; + + written = le16_to_cpu(smb->CountHigh); + written <<= 16; + written += le16_to_cpu(smb->Count); + /* + * Mask off high 16 bits when bytes written as returned + * by the server is greater than bytes requested by the + * client. OS/2 servers are known to set incorrect + * CountHigh values. + */ + if (written > wdata->bytes) + written &= 0xFFFF; + + if (written < wdata->bytes) + wdata->result = -ENOSPC; + else + wdata->bytes = written; + break; + case MID_REQUEST_SUBMITTED: + case MID_RETRY_NEEDED: + wdata->result = -EAGAIN; + break; + default: + wdata->result = -EIO; + break; + } + + queue_work(system_nrt_wq, &wdata->work); + DeleteMidQEntry(mid); + atomic_dec(&tcon->ses->server->inFlight); + wake_up(&tcon->ses->server->request_q); +} + +/* cifs_async_writev - send an async write, and set up mid to handle result */ +int +cifs_async_writev(struct cifs_writedata *wdata) +{ + int i, rc = -EACCES; + WRITE_REQ *smb = NULL; + int wct; + struct cifsTconInfo *tcon = tlink_tcon(wdata->cfile->tlink); + struct inode *inode = wdata->cfile->dentry->d_inode; + struct kvec *iov = NULL; + + if (tcon->ses->capabilities & CAP_LARGE_FILES) { + wct = 14; + } else { + wct = 12; + if (wdata->offset >> 32 > 0) { + /* can not handle big offset for old srv */ + return -EIO; + } + } + + rc = small_smb_init(SMB_COM_WRITE_ANDX, wct, tcon, (void **)&smb); + if (rc) + goto async_writev_out; + + /* 1 iov per page + 1 for header */ + iov = kzalloc((wdata->nr_pages + 1) * sizeof(*iov), GFP_NOFS); + if (iov == NULL) { + rc = -ENOMEM; + goto async_writev_out; + } + + smb->AndXCommand = 0xFF; /* none */ + smb->Fid = wdata->cfile->netfid; + smb->OffsetLow = cpu_to_le32(wdata->offset & 0xFFFFFFFF); + if (wct == 14) + smb->OffsetHigh = cpu_to_le32(wdata->offset >> 32); + smb->Reserved = 0xFFFFFFFF; + smb->WriteMode = 0; + smb->Remaining = 0; + + smb->DataOffset = + cpu_to_le16(offsetof(struct smb_com_write_req, Data) - 4); + + /* 4 for RFC1001 length + 1 for BCC */ + iov[0].iov_len = be32_to_cpu(smb->hdr.smb_buf_length) + 4 + 1; + iov[0].iov_base = smb; + + /* marshal up the pages into iov array */ + wdata->bytes = 0; + for (i = 0; i < wdata->nr_pages; i++) { + iov[i + 1].iov_len = min(inode->i_size - + page_offset(wdata->pages[i]), + (loff_t)PAGE_CACHE_SIZE); + iov[i + 1].iov_base = kmap(wdata->pages[i]); + wdata->bytes += iov[i + 1].iov_len; + } + + cFYI(1, "async write at %llu %u bytes", wdata->offset, wdata->bytes); + + smb->DataLengthLow = cpu_to_le16(wdata->bytes & 0xFFFF); + smb->DataLengthHigh = cpu_to_le16(wdata->bytes >> 16); + + if (wct == 14) { + inc_rfc1001_len(&smb->hdr, wdata->bytes + 1); + put_bcc(wdata->bytes + 1, &smb->hdr); + } else { + /* wct == 12 */ + struct smb_com_writex_req *smbw = + (struct smb_com_writex_req *)smb; + inc_rfc1001_len(&smbw->hdr, wdata->bytes + 5); + put_bcc(wdata->bytes + 5, &smbw->hdr); + iov[0].iov_len += 4; /* pad bigger by four bytes */ + } + + kref_get(&wdata->refcount); + rc = cifs_call_async(tcon->ses->server, iov, wdata->nr_pages + 1, + cifs_writev_callback, wdata, false); + + if (rc == 0) + cifs_stats_inc(&tcon->num_writes); + else + kref_put(&wdata->refcount, cifs_writedata_release); + + /* send is done, unmap pages */ + for (i = 0; i < wdata->nr_pages; i++) + kunmap(wdata->pages[i]); + +async_writev_out: + cifs_small_buf_release(smb); + kfree(iov); + return rc; +} + int CIFSSMBWrite2(const int xid, struct cifsTconInfo *tcon, const int netfid, const unsigned int count, -- cgit v1.2.3 From 8b27f2ff7a24f0735c96055e676872f05398d99b Mon Sep 17 00:00:00 2001 From: Nikhil P Rao Date: Wed, 25 May 2011 10:18:41 -0700 Subject: x86: Remove unnecessary check in detect_ht() This patch removes a check that causes incorrect scheduler domain setup (SMP instead of SMT) and bootlog warning messages when cpuid extensions for topology enumeration are not supported and the number of processors reported to the OS is smaller than smp_num_siblings. Acked-by: Suresh Siddha Signed-off-by: Nikhil P Rao Link: http://lkml.kernel.org/r/1306343921.19325.1.camel@fedora13 Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/common.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c8b41623377f..53f02f5d8cce 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -477,13 +477,6 @@ void __cpuinit detect_ht(struct cpuinfo_x86 *c) if (smp_num_siblings <= 1) goto out; - if (smp_num_siblings > nr_cpu_ids) { - pr_warning("CPU: Unsupported number of siblings %d", - smp_num_siblings); - smp_num_siblings = 1; - return; - } - index_msb = get_count_order(smp_num_siblings); c->phys_proc_id = apic->phys_pkg_id(c->initial_apicid, index_msb); -- cgit v1.2.3 From 46b2903c05b248ed78304113ecfba368b4c55def Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 25 May 2011 14:49:20 -0700 Subject: dmaengine: Add API documentation for slave dma usage Signed-off-by: Vinod Koul Signed-off-by: Dan Williams --- Documentation/dmaengine.txt | 97 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 96 insertions(+), 1 deletion(-) diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt index 0c1c2f63c0a9..5a0cb1ef6164 100644 --- a/Documentation/dmaengine.txt +++ b/Documentation/dmaengine.txt @@ -1 +1,96 @@ -See Documentation/crypto/async-tx-api.txt + DMA Engine API Guide + ==================== + + Vinod Koul + +NOTE: For DMA Engine usage in async_tx please see: + Documentation/crypto/async-tx-api.txt + + +Below is a guide to device driver writers on how to use the Slave-DMA API of the +DMA Engine. This is applicable only for slave DMA usage only. + +The slave DMA usage consists of following steps +1. Allocate a DMA slave channel +2. Set slave and controller specific parameters +3. Get a descriptor for transaction +4. Submit the transaction and wait for callback notification + +1. Allocate a DMA slave channel +Channel allocation is slightly different in the slave DMA context, client +drivers typically need a channel from a particular DMA controller only and even +in some cases a specific channel is desired. To request a channel +dma_request_channel() API is used. + +Interface: +struct dma_chan *dma_request_channel(dma_cap_mask_t mask, + dma_filter_fn filter_fn, + void *filter_param); +where dma_filter_fn is defined as: +typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param); + +When the optional 'filter_fn' parameter is set to NULL dma_request_channel +simply returns the first channel that satisfies the capability mask. Otherwise, +when the mask parameter is insufficient for specifying the necessary channel, +the filter_fn routine can be used to disposition the available channels in the +system. The filter_fn routine is called once for each free channel in the +system. Upon seeing a suitable channel filter_fn returns DMA_ACK which flags +that channel to be the return value from dma_request_channel. A channel +allocated via this interface is exclusive to the caller, until +dma_release_channel() is called. + +2. Set slave and controller specific parameters +Next step is always to pass some specific information to the DMA driver. Most of +the generic information which a slave DMA can use is in struct dma_slave_config. +It allows the clients to specify DMA direction, DMA addresses, bus widths, DMA +burst lengths etc. If some DMA controllers have more parameters to be sent then +they should try to embed struct dma_slave_config in their controller specific +structure. That gives flexibility to client to pass more parameters, if +required. + +Interface: +int dmaengine_slave_config(struct dma_chan *chan, + struct dma_slave_config *config) + +3. Get a descriptor for transaction +For slave usage the various modes of slave transfers supported by the +DMA-engine are: +slave_sg - DMA a list of scatter gather buffers from/to a peripheral +dma_cyclic - Perform a cyclic DMA operation from/to a peripheral till the + operation is explicitly stopped. +The non NULL return of this transfer API represents a "descriptor" for the given +transaction. + +Interface: +struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_sg)( + struct dma_chan *chan, + struct scatterlist *dst_sg, unsigned int dst_nents, + struct scatterlist *src_sg, unsigned int src_nents, + unsigned long flags); +struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_cyclic)( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_data_direction direction); + +4. Submit the transaction and wait for callback notification +To schedule the transaction to be scheduled by dma device, the "descriptor" +returned in above (3) needs to be submitted. +To tell the dma driver that a transaction is ready to be serviced, the +descriptor->submit() callback needs to be invoked. This chains the descriptor to +the pending queue. +The transactions in the pending queue can be activated by calling the +issue_pending API. If channel is idle then the first transaction in queue is +started and subsequent ones queued up. +On completion of the DMA operation the next in queue is submitted and a tasklet +triggered. The tasklet would then call the client driver completion callback +routine for notification, if set. +Interface: +void dma_async_issue_pending(struct dma_chan *chan); + +============================================================================== + +Additional usage notes for dma driver writers +1/ Although DMA engine specifies that completion callback routines cannot submit +any new operations, but typically for slave DMA subsequent transaction may not +be available for submit prior to callback routine being called. This requirement +is not a requirement for DMA-slave devices. But they should take care to drop +the spin-lock they might be holding before calling the callback routine -- cgit v1.2.3 From 0714a57c6865f31ed3366e5abdfae7da580d41d2 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 24 May 2011 11:53:29 -0700 Subject: xhci: Clear stopped_td when Stop Endpoint command completes. When an URB is cancelled, the xHCI driver issues a Stop Endpoint command so that it can manipulate the ring and remove the transfer. The xHC hardware then places a transfer event with the completion code "Stopped" or "Stopped Invalid" to let the driver know what TD it was in the middle of processing. This TD and TRB is stored in ep->stopped_td and ep->stopped_trb. These pointers are also used in handling stalled endpoints. By design, the Stop Endpoint command can race with URB completion. By the time the Stop Endpoint command is handled, the URBs to be cancelled may have been given back to the driver. Unfortunately, the stopped_td and stopped_trb pointers were not getting cleared in this case. The USB core unconditionally tries to reset the toggle bits on any endpoints when a new alternate interface setting is installed. When the xHCI driver saw that ep->stopped_td was still set from the Stop Endpoint command, xhci_reset_endpoint assumed the endpoint was actually stalled, and attempted to clean up the endpoint rings. This would manifest itself in a failed Reset Endpoint command and failed Set TR dequeue Pointer command after a successful Configure Endpoint command. It may have also been causing driver oops when the stopped_td was accessed. This patch should be backported to stable kernels since 2.6.31. Before 2.6.33, stopped_td was found in the xhci_endpoint_ring, not the xhci_virt_ep. Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 237a765f8d18..ba551239d28b 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -692,6 +692,8 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci, if (list_empty(&ep->cancelled_td_list)) { xhci_stop_watchdog_timer_in_irq(xhci, ep); + ep->stopped_td = NULL; + ep->stopped_trb = NULL; ring_doorbell_for_active_rings(xhci, slot_id, ep_index); return; } -- cgit v1.2.3 From fe6c6c13d8dcb32398eef143e2e8efc3fb4019bf Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 23 May 2011 16:41:17 -0700 Subject: xhci: Don't submit commands when the host is dead. When the xHCI host controller dies, the USB core may attempt to reset the devices to their default configuration before disconnecting them. This causes calls into the xHCI bandwidth allocation functions. Don't allow those functions to submit commands or work on xHCI structures if the host controller is marked as dying. Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8f2a56ece44f..58183d2a8089 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1314,8 +1314,10 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, if (ret <= 0) return ret; xhci = hcd_to_xhci(hcd); - xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); + if (xhci->xhc_state & XHCI_STATE_DYING) + return -ENODEV; + xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); drop_flag = xhci_get_endpoint_flag(&ep->desc); if (drop_flag == SLOT_FLAG || drop_flag == EP0_FLAG) { xhci_dbg(xhci, "xHCI %s - can't drop slot or ep 0 %#x\n", @@ -1401,6 +1403,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, return ret; } xhci = hcd_to_xhci(hcd); + if (xhci->xhc_state & XHCI_STATE_DYING) + return -ENODEV; added_ctxs = xhci_get_endpoint_flag(&ep->desc); last_ctx = xhci_last_valid_endpoint(added_ctxs); @@ -1676,6 +1680,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) if (ret <= 0) return ret; xhci = hcd_to_xhci(hcd); + if (xhci->xhc_state & XHCI_STATE_DYING) + return -ENODEV; xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); virt_dev = xhci->devs[udev->slot_id]; -- cgit v1.2.3 From 380032c3c855ded74c43252a0adb8e8d7afc9f45 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 5 Apr 2011 13:33:56 -0700 Subject: xhci: STFU: Remove function tracing. Remove unnecessary debugging from the xHCI driver. We don't need to know what function we're calling or returning from. Now I know how to use markup-oops.pl to de-mystify stack dumps of crashes. Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index ba551239d28b..4794905d38d7 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2182,7 +2182,6 @@ static int xhci_handle_event(struct xhci_hcd *xhci) int update_ptrs = 1; int ret; - xhci_dbg(xhci, "In %s\n", __func__); if (!xhci->event_ring || !xhci->event_ring->dequeue) { xhci->error_bitmask |= 1 << 1; return 0; @@ -2195,7 +2194,6 @@ static int xhci_handle_event(struct xhci_hcd *xhci) xhci->error_bitmask |= 1 << 2; return 0; } - xhci_dbg(xhci, "%s - OS owns TRB\n", __func__); /* * Barrier between reading the TRB_CYCLE (valid) flag above and any @@ -2205,20 +2203,14 @@ static int xhci_handle_event(struct xhci_hcd *xhci) /* FIXME: Handle more event types. */ switch ((le32_to_cpu(event->event_cmd.flags) & TRB_TYPE_BITMASK)) { case TRB_TYPE(TRB_COMPLETION): - xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__); handle_cmd_completion(xhci, &event->event_cmd); - xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__); break; case TRB_TYPE(TRB_PORT_STATUS): - xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__); handle_port_status(xhci, event); - xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__); update_ptrs = 0; break; case TRB_TYPE(TRB_TRANSFER): - xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__); ret = handle_tx_event(xhci, &event->trans_event); - xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__); if (ret < 0) xhci->error_bitmask |= 1 << 9; else -- cgit v1.2.3 From cca4acc491ade9280e88a756d5d7d9424d160814 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 25 May 2011 10:56:58 -0300 Subject: [media] Documentation/DocBook: Rename media fops xml files By convention, the name of the XML file should match the references declared at media-entities.tmpl, as, otherwise, some validation scripts break. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media-entities.tmpl | 6 +++--- Documentation/DocBook/v4l/media-controller.xml | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index c8abb23ef1e7..5c44aa73d57a 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -373,9 +373,9 @@ - - - + + + diff --git a/Documentation/DocBook/v4l/media-controller.xml b/Documentation/DocBook/v4l/media-controller.xml index 2dc25e1d4089..873ac3a621f0 100644 --- a/Documentation/DocBook/v4l/media-controller.xml +++ b/Documentation/DocBook/v4l/media-controller.xml @@ -78,9 +78,9 @@ Function Reference - &sub-media-open; - &sub-media-close; - &sub-media-ioctl; + &sub-media-func-open; + &sub-media-func-close; + &sub-media-func-ioctl; &sub-media-ioc-device-info; &sub-media-ioc-enum-entities; -- cgit v1.2.3 From 115d2535f8ced13503b62a1275338e09a51681dc Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 25 May 2011 11:55:57 -0300 Subject: [media] add V4L2-PIX-FMT-SRGGB12 & friends to docbook The xml with those guys are there, but they weren't included on the docbook. Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media-entities.tmpl | 1 + Documentation/DocBook/v4l/pixfmt.xml | 1 + 2 files changed, 2 insertions(+) diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index 5c44aa73d57a..e5fe09430fd9 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -293,6 +293,7 @@ + diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml index dbfe3b08435f..deb660207f94 100644 --- a/Documentation/DocBook/v4l/pixfmt.xml +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -673,6 +673,7 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.< &sub-srggb8; &sub-sbggr16; &sub-srggb10; + &sub-srggb12;
-- cgit v1.2.3 From 5a254d751e52e0f817090c29950d16cf18490d5b Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 21 Jan 2010 05:39:47 -0300 Subject: [media] uvcvideo: Register a v4l2_device As a first step to the media controller integration register a v4l2_device for each UVC control interface and make the video_device a child of the v4l2_device. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_driver.c | 29 +++++++++++++++++++++++++++-- drivers/media/video/uvc/uvcvideo.h | 6 ++++++ 2 files changed, 33 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 823f4b389745..0e8cd1fd870f 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1585,6 +1585,13 @@ static void uvc_delete(struct uvc_device *dev) uvc_status_cleanup(dev); uvc_ctrl_cleanup_device(dev); + if (dev->vdev.dev) + v4l2_device_unregister(&dev->vdev); +#ifdef CONFIG_MEDIA_CONTROLLER + if (media_devnode_is_registered(&dev->mdev.devnode)) + media_device_unregister(&dev->mdev); +#endif + list_for_each_safe(p, n, &dev->chains) { struct uvc_video_chain *chain; chain = list_entry(p, struct uvc_video_chain, list); @@ -1682,7 +1689,7 @@ static int uvc_register_video(struct uvc_device *dev, * unregistered before the reference is released, so we don't need to * get another one. */ - vdev->parent = &dev->intf->dev; + vdev->v4l2_dev = &dev->vdev; vdev->fops = &uvc_fops; vdev->release = uvc_release; strlcpy(vdev->name, dev->name, sizeof vdev->name); @@ -1814,6 +1821,24 @@ static int uvc_probe(struct usb_interface *intf, "linux-uvc-devel mailing list.\n"); } + /* Register the media and V4L2 devices. */ +#ifdef CONFIG_MEDIA_CONTROLLER + dev->mdev.dev = &intf->dev; + strlcpy(dev->mdev.model, dev->name, sizeof(dev->mdev.model)); + if (udev->serial) + strlcpy(dev->mdev.serial, udev->serial, + sizeof(dev->mdev.serial)); + strcpy(dev->mdev.bus_info, udev->devpath); + dev->mdev.hw_revision = le16_to_cpu(udev->descriptor.bcdDevice); + dev->mdev.driver_version = DRIVER_VERSION_NUMBER; + if (media_device_register(&dev->mdev) < 0) + goto error; + + dev->vdev.mdev = &dev->mdev; +#endif + if (v4l2_device_register(&intf->dev, &dev->vdev) < 0) + goto error; + /* Initialize controls. */ if (uvc_ctrl_init_device(dev) < 0) goto error; @@ -1822,7 +1847,7 @@ static int uvc_probe(struct usb_interface *intf, if (uvc_scan_device(dev) < 0) goto error; - /* Register video devices. */ + /* Register video device nodes. */ if (uvc_register_chains(dev) < 0) goto error; diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index 7cf224bae2e5..aab7508f2bd2 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -100,6 +100,8 @@ struct uvc_xu_control { #include #include #include +#include +#include /* -------------------------------------------------------------------------- * UVC constants @@ -504,6 +506,10 @@ struct uvc_device { atomic_t nmappings; /* Video control interface */ +#ifdef CONFIG_MEDIA_CONTROLLER + struct media_device mdev; +#endif + struct v4l2_device vdev; __u16 uvc_version; __u32 clock_frequency; -- cgit v1.2.3 From 4ffc2d89f38a7fbb3b24adb7fb066a159c351c11 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 21 Jan 2010 05:39:52 -0300 Subject: [media] uvcvideo: Register subdevices for each entity Userspace applications can now discover the UVC device topology using the media controller API. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/Makefile | 3 ++ drivers/media/video/uvc/uvc_driver.c | 29 +++++++++-- drivers/media/video/uvc/uvc_entity.c | 94 ++++++++++++++++++++++++++++++++++++ drivers/media/video/uvc/uvcvideo.h | 13 +++++ 4 files changed, 136 insertions(+), 3 deletions(-) create mode 100644 drivers/media/video/uvc/uvc_entity.c diff --git a/drivers/media/video/uvc/Makefile b/drivers/media/video/uvc/Makefile index 968c1994eda0..2071ca8a2f03 100644 --- a/drivers/media/video/uvc/Makefile +++ b/drivers/media/video/uvc/Makefile @@ -1,3 +1,6 @@ uvcvideo-objs := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \ uvc_status.o uvc_isight.o +ifeq ($(CONFIG_MEDIA_CONTROLLER),y) +uvcvideo-objs += uvc_entity.o +endif obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 0e8cd1fd870f..0bf3413e8d37 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -248,7 +248,7 @@ uint32_t uvc_fraction_to_interval(uint32_t numerator, uint32_t denominator) * Terminal and unit management */ -static struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id) +struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id) { struct uvc_entity *entity; @@ -795,9 +795,12 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id, struct uvc_entity *entity; unsigned int num_inputs; unsigned int size; + unsigned int i; + extra_size = ALIGN(extra_size, sizeof(*entity->pads)); num_inputs = (type & UVC_TERM_OUTPUT) ? num_pads : num_pads - 1; - size = sizeof(*entity) + extra_size + num_inputs; + size = sizeof(*entity) + extra_size + sizeof(*entity->pads) * num_pads + + num_inputs; entity = kzalloc(size, GFP_KERNEL); if (entity == NULL) return NULL; @@ -805,8 +808,17 @@ static struct uvc_entity *uvc_alloc_entity(u16 type, u8 id, entity->id = id; entity->type = type; + entity->num_links = 0; + entity->num_pads = num_pads; + entity->pads = ((void *)(entity + 1)) + extra_size; + + for (i = 0; i < num_inputs; ++i) + entity->pads[i].flags = MEDIA_PAD_FL_SINK; + if (!UVC_ENTITY_IS_OTERM(entity)) + entity->pads[num_pads-1].flags = MEDIA_PAD_FL_SOURCE; + entity->bNrInPins = num_inputs; - entity->baSourceID = ((__u8 *)entity) + sizeof(*entity) + extra_size; + entity->baSourceID = (__u8 *)(&entity->pads[num_pads]); return entity; } @@ -1601,6 +1613,9 @@ static void uvc_delete(struct uvc_device *dev) list_for_each_safe(p, n, &dev->entities) { struct uvc_entity *entity; entity = list_entry(p, struct uvc_entity, list); +#ifdef CONFIG_MEDIA_CONTROLLER + uvc_mc_cleanup_entity(entity); +#endif kfree(entity); } @@ -1752,6 +1767,14 @@ static int uvc_register_chains(struct uvc_device *dev) ret = uvc_register_terms(dev, chain); if (ret < 0) return ret; + +#ifdef CONFIG_MEDIA_CONTROLLER + ret = uvc_mc_register_entities(chain); + if (ret < 0) { + uvc_printk(KERN_INFO, "Failed to register entites " + "(%d).\n", ret); + } +#endif } return 0; diff --git a/drivers/media/video/uvc/uvc_entity.c b/drivers/media/video/uvc/uvc_entity.c new file mode 100644 index 000000000000..8e8e7efb4608 --- /dev/null +++ b/drivers/media/video/uvc/uvc_entity.c @@ -0,0 +1,94 @@ +/* + * uvc_entity.c -- USB Video Class driver + * + * Copyright (C) 2005-2011 + * Laurent Pinchart (laurent.pinchart@ideasonboard.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include + +#include + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * Video subdevices registration and unregistration + */ + +static int uvc_mc_register_entity(struct uvc_video_chain *chain, + struct uvc_entity *entity) +{ + const u32 flags = MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE; + struct uvc_entity *remote; + unsigned int i; + u8 remote_pad; + int ret; + + for (i = 0; i < entity->num_pads; ++i) { + if (!(entity->pads[i].flags & MEDIA_PAD_FL_SINK)) + continue; + + remote = uvc_entity_by_id(chain->dev, entity->baSourceID[i]); + if (remote == NULL) + return -EINVAL; + + remote_pad = remote->num_pads - 1; + ret = media_entity_create_link(&remote->subdev.entity, + remote_pad, &entity->subdev.entity, i, flags); + if (ret < 0) + return ret; + } + + return v4l2_device_register_subdev(&chain->dev->vdev, &entity->subdev); +} + +static struct v4l2_subdev_ops uvc_subdev_ops = { +}; + +void uvc_mc_cleanup_entity(struct uvc_entity *entity) +{ + media_entity_cleanup(&entity->subdev.entity); +} + +static int uvc_mc_init_entity(struct uvc_entity *entity) +{ + v4l2_subdev_init(&entity->subdev, &uvc_subdev_ops); + strlcpy(entity->subdev.name, entity->name, sizeof(entity->subdev.name)); + + return media_entity_init(&entity->subdev.entity, entity->num_pads, + entity->pads, 0); +} + +int uvc_mc_register_entities(struct uvc_video_chain *chain) +{ + struct uvc_entity *entity; + int ret; + + list_for_each_entry(entity, &chain->entities, chain) { + ret = uvc_mc_init_entity(entity); + if (ret < 0) { + uvc_printk(KERN_INFO, "Failed to initialize entity for " + "entity %u\n", entity->id); + return ret; + } + } + + list_for_each_entry(entity, &chain->entities, chain) { + ret = uvc_mc_register_entity(chain, entity); + if (ret < 0) { + uvc_printk(KERN_INFO, "Failed to register entity for " + "entity %u\n", entity->id); + return ret; + } + } + + return 0; +} diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index aab7508f2bd2..3906f6ed4061 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -98,6 +98,7 @@ struct uvc_xu_control { #ifdef __KERNEL__ #include +#include #include #include #include @@ -303,6 +304,12 @@ struct uvc_entity { __u16 type; char name[64]; + /* Media controller-related fields. */ + struct v4l2_subdev subdev; + unsigned int num_pads; + unsigned int num_links; + struct media_pad *pads; + union { struct { __u16 wObjectiveFocalLengthMin; @@ -589,6 +596,8 @@ extern unsigned int uvc_timeout_param; /* Core driver */ extern struct uvc_driver uvc_driver; +extern struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id); + /* Video buffers queue management. */ extern void uvc_queue_init(struct uvc_video_queue *queue, enum v4l2_buf_type type, int drop_corrupted); @@ -622,6 +631,10 @@ static inline int uvc_queue_streaming(struct uvc_video_queue *queue) /* V4L2 interface */ extern const struct v4l2_file_operations uvc_fops; +/* Media controller */ +extern int uvc_mc_register_entities(struct uvc_video_chain *chain); +extern void uvc_mc_cleanup_entity(struct uvc_entity *entity); + /* Video */ extern int uvc_video_init(struct uvc_streaming *stream); extern int uvc_video_suspend(struct uvc_streaming *stream); -- cgit v1.2.3 From 8a65a9485832f90e18e2f7069b75a4181e2840c0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 21 Jan 2010 08:56:19 -0300 Subject: [media] uvcvideo: Connect video devices to media entities The video devices associated to USB streaming terminals must be connected to their associated terminal's media entity instead of being standalone entities. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/uvc/uvc_driver.c | 8 ++++++-- drivers/media/video/uvc/uvc_entity.c | 40 ++++++++++++++++++++++++++++-------- drivers/media/video/uvc/uvcvideo.h | 1 + 3 files changed, 39 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c index 0bf3413e8d37..b6eae48d7fb8 100644 --- a/drivers/media/video/uvc/uvc_driver.c +++ b/drivers/media/video/uvc/uvc_driver.c @@ -1616,6 +1616,10 @@ static void uvc_delete(struct uvc_device *dev) #ifdef CONFIG_MEDIA_CONTROLLER uvc_mc_cleanup_entity(entity); #endif + if (entity->vdev) { + video_device_release(entity->vdev); + entity->vdev = NULL; + } kfree(entity); } @@ -1638,8 +1642,6 @@ static void uvc_release(struct video_device *vdev) struct uvc_streaming *stream = video_get_drvdata(vdev); struct uvc_device *dev = stream->dev; - video_device_release(vdev); - /* Decrement the registered streams count and delete the device when it * reaches zero. */ @@ -1753,6 +1755,8 @@ static int uvc_register_terms(struct uvc_device *dev, ret = uvc_register_video(dev, stream); if (ret < 0) return ret; + + term->vdev = stream->vdev; } return 0; diff --git a/drivers/media/video/uvc/uvc_entity.c b/drivers/media/video/uvc/uvc_entity.c index 8e8e7efb4608..ede7852bb1df 100644 --- a/drivers/media/video/uvc/uvc_entity.c +++ b/drivers/media/video/uvc/uvc_entity.c @@ -33,6 +33,9 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain, int ret; for (i = 0; i < entity->num_pads; ++i) { + struct media_entity *source; + struct media_entity *sink; + if (!(entity->pads[i].flags & MEDIA_PAD_FL_SINK)) continue; @@ -40,14 +43,23 @@ static int uvc_mc_register_entity(struct uvc_video_chain *chain, if (remote == NULL) return -EINVAL; + source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING) + ? &remote->vdev->entity : &remote->subdev.entity; + sink = (UVC_ENTITY_TYPE(entity) == UVC_TT_STREAMING) + ? &entity->vdev->entity : &entity->subdev.entity; + remote_pad = remote->num_pads - 1; - ret = media_entity_create_link(&remote->subdev.entity, - remote_pad, &entity->subdev.entity, i, flags); + ret = media_entity_create_link(source, remote_pad, + sink, i, flags); if (ret < 0) return ret; } - return v4l2_device_register_subdev(&chain->dev->vdev, &entity->subdev); + if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING) + ret = v4l2_device_register_subdev(&chain->dev->vdev, + &entity->subdev); + + return ret; } static struct v4l2_subdev_ops uvc_subdev_ops = { @@ -55,16 +67,28 @@ static struct v4l2_subdev_ops uvc_subdev_ops = { void uvc_mc_cleanup_entity(struct uvc_entity *entity) { - media_entity_cleanup(&entity->subdev.entity); + if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING) + media_entity_cleanup(&entity->subdev.entity); + else if (entity->vdev != NULL) + media_entity_cleanup(&entity->vdev->entity); } static int uvc_mc_init_entity(struct uvc_entity *entity) { - v4l2_subdev_init(&entity->subdev, &uvc_subdev_ops); - strlcpy(entity->subdev.name, entity->name, sizeof(entity->subdev.name)); + int ret; + + if (UVC_ENTITY_TYPE(entity) != UVC_TT_STREAMING) { + v4l2_subdev_init(&entity->subdev, &uvc_subdev_ops); + strlcpy(entity->subdev.name, entity->name, + sizeof(entity->subdev.name)); + + ret = media_entity_init(&entity->subdev.entity, + entity->num_pads, entity->pads, 0); + } else + ret = media_entity_init(&entity->vdev->entity, + entity->num_pads, entity->pads, 0); - return media_entity_init(&entity->subdev.entity, entity->num_pads, - entity->pads, 0); + return ret; } int uvc_mc_register_entities(struct uvc_video_chain *chain) diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h index 3906f6ed4061..20107fd3574d 100644 --- a/drivers/media/video/uvc/uvcvideo.h +++ b/drivers/media/video/uvc/uvcvideo.h @@ -305,6 +305,7 @@ struct uvc_entity { char name[64]; /* Media controller-related fields. */ + struct video_device *vdev; struct v4l2_subdev subdev; unsigned int num_pads; unsigned int num_links; -- cgit v1.2.3 From 5153b7b39105d8beb38e1c3f26ab4b877960d8e1 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 5 Apr 2011 13:33:56 -0700 Subject: xhci: STFU: Don't print event ring dequeue pointer. Stop printing out the event ring dequeue pointer and status register in the operational register set. The host will report an OK status 99% of the time the interrupt handler is called, and usually when it's really hosed, a host controller won't even call the interrupt handler. So the line is really useless. Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 4794905d38d7..f1ae17234032 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -167,9 +167,7 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer next = ring->dequeue; } addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); - if (ring == xhci->event_ring) - xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr); - else if (ring == xhci->cmd_ring) + if (ring == xhci->cmd_ring) xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr); else xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr); @@ -2267,16 +2265,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) spin_unlock(&xhci->lock); return IRQ_NONE; } - xhci_dbg(xhci, "op reg status = %08x\n", status); - xhci_dbg(xhci, "Event ring dequeue ptr:\n"); - xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n", - (unsigned long long) - xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb), - lower_32_bits(le64_to_cpu(trb->link.segment_ptr)), - upper_32_bits(le64_to_cpu(trb->link.segment_ptr)), - (unsigned int) le32_to_cpu(trb->link.intr_target), - (unsigned int) le32_to_cpu(trb->link.control)); - if (status & STS_FATAL) { xhci_warn(xhci, "WARNING: Host System Error\n"); xhci_halt(xhci); -- cgit v1.2.3 From f444ff27e9b8c953eef49da65c649fdcd202165a Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 5 Apr 2011 15:53:47 -0700 Subject: xhci: STFU: Be quieter during URB submission and completion. Unsurprisingly, URBs get submitted and completed a lot in the xHCI driver. If we have to print 10 lines of debug for every URB submitted or completed, then that can cause the whole system to stay in the interrupt handler too long, and can cause Missed Service completion codes for isochronous transfers. Cut down the debugging in the URB submission and completion paths: - Don't squawk about successful transfers, only unsuccessful ones. - Only print the number of bytes transferred if this was a short transfer. - Don't print the endpoint index for successful transfers (will add more debug to failed transfers to show endpoint index there later). - Stop printing MMIO writes. This debugging shows up when the endpoint doorbell is rung a to start a transfer (basically for every URB). - Don't print out the ring enqueue and dequeue pointers - Stop printing when we're pointing to a link TRB. Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-ring.c | 46 +++++++++++++++----------------------------- drivers/usb/host/xhci.h | 6 ------ 2 files changed, 15 insertions(+), 37 deletions(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index f1ae17234032..d1498c03c4cb 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -167,10 +167,6 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer next = ring->dequeue; } addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue); - if (ring == xhci->cmd_ring) - xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr); - else - xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr); } /* @@ -246,12 +242,6 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, next = ring->enqueue; } addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue); - if (ring == xhci->event_ring) - xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr); - else if (ring == xhci->cmd_ring) - xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr); - else - xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr); } /* @@ -634,13 +624,11 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci, } } usb_hcd_unlink_urb_from_ep(hcd, urb); - xhci_dbg(xhci, "Giveback %s URB %p\n", adjective, urb); spin_unlock(&xhci->lock); usb_hcd_giveback_urb(hcd, urb, status); xhci_urb_free_priv(xhci, urb_priv); spin_lock(&xhci->lock); - xhci_dbg(xhci, "%s URB given back\n", adjective); } } @@ -1630,7 +1618,6 @@ static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_td *td, "without IOC set??\n"); *status = -ESHUTDOWN; } else { - xhci_dbg(xhci, "Successful control transfer!\n"); *status = 0; } break; @@ -1727,7 +1714,6 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td, switch (trb_comp_code) { case COMP_SUCCESS: frame->status = 0; - xhci_dbg(xhci, "Successful isoc transfer!\n"); break; case COMP_SHORT_TX: frame->status = td->urb->transfer_flags & URB_SHORT_NOT_OK ? @@ -1837,12 +1823,6 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, else *status = 0; } else { - if (usb_endpoint_xfer_bulk(&td->urb->ep->desc)) - xhci_dbg(xhci, "Successful bulk " - "transfer!\n"); - else - xhci_dbg(xhci, "Successful interrupt " - "transfer!\n"); *status = 0; } break; @@ -1856,11 +1836,12 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td, /* Others already handled above */ break; } - xhci_dbg(xhci, "ep %#x - asked for %d bytes, " - "%d bytes untransferred\n", - td->urb->ep->desc.bEndpointAddress, - td->urb->transfer_buffer_length, - TRB_LEN(le32_to_cpu(event->transfer_len))); + if (trb_comp_code == COMP_SHORT_TX) + xhci_dbg(xhci, "ep %#x - asked for %d bytes, " + "%d bytes untransferred\n", + td->urb->ep->desc.bEndpointAddress, + td->urb->transfer_buffer_length, + TRB_LEN(le32_to_cpu(event->transfer_len))); /* Fast path - was this the last TRB in the TD for this URB? */ if (event_trb == td->last_trb) { if (TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) { @@ -1954,7 +1935,6 @@ static int handle_tx_event(struct xhci_hcd *xhci, /* Endpoint ID is 1 based, our index is zero based */ ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1; - xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index); ep = &xdev->eps[ep_index]; ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer)); ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index); @@ -2149,9 +2129,15 @@ cleanup: xhci_urb_free_priv(xhci, urb_priv); usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb); - xhci_dbg(xhci, "Giveback URB %p, len = %d, " - "status = %d\n", - urb, urb->actual_length, status); + if ((urb->actual_length != urb->transfer_buffer_length && + (urb->transfer_flags & + URB_SHORT_NOT_OK)) || + status != 0) + xhci_dbg(xhci, "Giveback URB %p, len = %d, " + "expected = %x, status = %d\n", + urb, urb->actual_length, + urb->transfer_buffer_length, + status); spin_unlock(&xhci->lock); usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status); spin_lock(&xhci->lock); @@ -2379,7 +2365,6 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, u32 ep_state, unsigned int num_trbs, gfp_t mem_flags) { /* Make sure the endpoint has been added to xHC schedule */ - xhci_dbg(xhci, "Endpoint state = 0x%x\n", ep_state); switch (ep_state) { case EP_STATE_DISABLED: /* @@ -2416,7 +2401,6 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, struct xhci_ring *ring = ep_ring; union xhci_trb *next; - xhci_dbg(xhci, "prepare_ring: pointing to link trb\n"); next = ring->enqueue; while (last_trb(xhci, ring, ring->enq_seg, next)) { diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index e12db7cfb9bb..0772a8cfea23 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1338,9 +1338,6 @@ static inline unsigned int xhci_readl(const struct xhci_hcd *xhci, static inline void xhci_writel(struct xhci_hcd *xhci, const unsigned int val, __le32 __iomem *regs) { - xhci_dbg(xhci, - "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n", - regs, val); writel(val, regs); } @@ -1368,9 +1365,6 @@ static inline void xhci_write_64(struct xhci_hcd *xhci, u32 val_lo = lower_32_bits(val); u32 val_hi = upper_32_bits(val); - xhci_dbg(xhci, - "`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n", - regs, (long unsigned int) val); writel(val_lo, ptr); writel(val_hi, ptr + 1); } -- cgit v1.2.3 From 9bdc79ea07d98386b72e1b6b1613742556fba3af Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 25 May 2011 13:35:13 -0300 Subject: [media] fintek-cir: new driver for Fintek LPC SuperIO CIR function This is a new driver for the Fintek LPC SuperIO CIR function, in the Fintek F71809 chip. Hardware and datasheets were provided by Fintek, so thanks go to them for supporting this effort. This driver started out as a copy of the nuvoton-cir driver, and was then modified as needed for the Fintek chip. The two share many similaries, though the buffer handling for the Fintek chip is actually nearly identical to the mceusb buffer handling, so the parser routine is almost a drop-in copy of the mceusb buffer parser (a candidate for being abstracted out into shared code at some point). This initial code drop *only* supports receive, but the hardware does support transmit as well. I really haven't even started to look at what's required, but my guess is that its also pretty similar to mceusb. Most people are probably only really interested in RX anyway though, so I think its good to get this out there even with only RX. (Nb: there are also Fintek-made mceusb receivers, which presumably, this chip shares CIR hardware with). This hardware can be found on at least Jetway NC98 boards and derivative systems, and likely others as well. Functionality was tested with an NC98 development board, in-kernel decode of RC6 (mce), RC5 (hauppauge) and NEC-ish (tivo) remotes all successful, as was lirc userspace decode of the RC6 remote. CC: Aaron Huang CC: Tom Tsai Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/Kconfig | 12 + drivers/media/rc/Makefile | 1 + drivers/media/rc/fintek-cir.c | 684 ++++++++++++++++++++++++++++++++++++++++++ drivers/media/rc/fintek-cir.h | 243 +++++++++++++++ 4 files changed, 940 insertions(+) create mode 100644 drivers/media/rc/fintek-cir.c create mode 100644 drivers/media/rc/fintek-cir.h diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 154c337f00fd..7d4bbc226d06 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -148,6 +148,18 @@ config IR_ITE_CIR To compile this driver as a module, choose M here: the module will be called ite-cir. +config IR_FINTEK + tristate "Fintek Consumer Infrared Transceiver" + depends on PNP + depends on RC_CORE + ---help--- + Say Y here to enable support for integrated infrared receiver + /transciever made by Fintek. This chip is found on assorted + Jetway motherboards (and of course, possibly others). + + To compile this driver as a module, choose M here: the + module will be called fintek-cir. + config IR_NUVOTON tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" depends on PNP diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile index 1f90a219a162..52830e5f4eaa 100644 --- a/drivers/media/rc/Makefile +++ b/drivers/media/rc/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o obj-$(CONFIG_IR_IMON) += imon.o obj-$(CONFIG_IR_ITE_CIR) += ite-cir.o obj-$(CONFIG_IR_MCEUSB) += mceusb.o +obj-$(CONFIG_IR_FINTEK) += fintek-cir.o obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o obj-$(CONFIG_IR_ENE) += ene_ir.o obj-$(CONFIG_IR_REDRAT3) += redrat3.o diff --git a/drivers/media/rc/fintek-cir.c b/drivers/media/rc/fintek-cir.c new file mode 100644 index 000000000000..8fa539dde1b4 --- /dev/null +++ b/drivers/media/rc/fintek-cir.c @@ -0,0 +1,684 @@ +/* + * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR + * + * Copyright (C) 2011 Jarod Wilson + * + * Special thanks to Fintek for providing hardware and spec sheets. + * This driver is based upon the nuvoton, ite and ene drivers for + * similar hardware. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fintek-cir.h" + +/* write val to config reg */ +static inline void fintek_cr_write(struct fintek_dev *fintek, u8 val, u8 reg) +{ + fit_dbg("%s: reg 0x%02x, val 0x%02x (ip/dp: %02x/%02x)", + __func__, reg, val, fintek->cr_ip, fintek->cr_dp); + outb(reg, fintek->cr_ip); + outb(val, fintek->cr_dp); +} + +/* read val from config reg */ +static inline u8 fintek_cr_read(struct fintek_dev *fintek, u8 reg) +{ + u8 val; + + outb(reg, fintek->cr_ip); + val = inb(fintek->cr_dp); + + fit_dbg("%s: reg 0x%02x, val 0x%02x (ip/dp: %02x/%02x)", + __func__, reg, val, fintek->cr_ip, fintek->cr_dp); + return val; +} + +/* update config register bit without changing other bits */ +static inline void fintek_set_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg) +{ + u8 tmp = fintek_cr_read(fintek, reg) | val; + fintek_cr_write(fintek, tmp, reg); +} + +/* clear config register bit without changing other bits */ +static inline void fintek_clear_reg_bit(struct fintek_dev *fintek, u8 val, u8 reg) +{ + u8 tmp = fintek_cr_read(fintek, reg) & ~val; + fintek_cr_write(fintek, tmp, reg); +} + +/* enter config mode */ +static inline void fintek_config_mode_enable(struct fintek_dev *fintek) +{ + /* Enabling Config Mode explicitly requires writing 2x */ + outb(CONFIG_REG_ENABLE, fintek->cr_ip); + outb(CONFIG_REG_ENABLE, fintek->cr_ip); +} + +/* exit config mode */ +static inline void fintek_config_mode_disable(struct fintek_dev *fintek) +{ + outb(CONFIG_REG_DISABLE, fintek->cr_ip); +} + +/* + * When you want to address a specific logical device, write its logical + * device number to GCR_LOGICAL_DEV_NO + */ +static inline void fintek_select_logical_dev(struct fintek_dev *fintek, u8 ldev) +{ + fintek_cr_write(fintek, ldev, GCR_LOGICAL_DEV_NO); +} + +/* write val to cir config register */ +static inline void fintek_cir_reg_write(struct fintek_dev *fintek, u8 val, u8 offset) +{ + outb(val, fintek->cir_addr + offset); +} + +/* read val from cir config register */ +static u8 fintek_cir_reg_read(struct fintek_dev *fintek, u8 offset) +{ + u8 val; + + val = inb(fintek->cir_addr + offset); + + return val; +} + +#define pr_reg(text, ...) \ + printk(KERN_INFO KBUILD_MODNAME ": " text, ## __VA_ARGS__) + +/* dump current cir register contents */ +static void cir_dump_regs(struct fintek_dev *fintek) +{ + fintek_config_mode_enable(fintek); + fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + + pr_reg("%s: Dump CIR logical device registers:\n", FINTEK_DRIVER_NAME); + pr_reg(" * CR CIR BASE ADDR: 0x%x\n", + (fintek_cr_read(fintek, CIR_CR_BASE_ADDR_HI) << 8) | + fintek_cr_read(fintek, CIR_CR_BASE_ADDR_LO)); + pr_reg(" * CR CIR IRQ NUM: 0x%x\n", + fintek_cr_read(fintek, CIR_CR_IRQ_SEL)); + + fintek_config_mode_disable(fintek); + + pr_reg("%s: Dump CIR registers:\n", FINTEK_DRIVER_NAME); + pr_reg(" * STATUS: 0x%x\n", fintek_cir_reg_read(fintek, CIR_STATUS)); + pr_reg(" * CONTROL: 0x%x\n", fintek_cir_reg_read(fintek, CIR_CONTROL)); + pr_reg(" * RX_DATA: 0x%x\n", fintek_cir_reg_read(fintek, CIR_RX_DATA)); + pr_reg(" * TX_CONTROL: 0x%x\n", fintek_cir_reg_read(fintek, CIR_TX_CONTROL)); + pr_reg(" * TX_DATA: 0x%x\n", fintek_cir_reg_read(fintek, CIR_TX_DATA)); +} + +/* detect hardware features */ +static int fintek_hw_detect(struct fintek_dev *fintek) +{ + unsigned long flags; + u8 chip_major, chip_minor; + u8 vendor_major, vendor_minor; + u8 portsel, ir_class; + u16 vendor; + int ret = 0; + + fintek_config_mode_enable(fintek); + + /* Check if we're using config port 0x4e or 0x2e */ + portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL); + if (portsel == 0xff) { + fit_pr(KERN_INFO, "first portsel read was bunk, trying alt"); + fintek_config_mode_disable(fintek); + fintek->cr_ip = CR_INDEX_PORT2; + fintek->cr_dp = CR_DATA_PORT2; + fintek_config_mode_enable(fintek); + portsel = fintek_cr_read(fintek, GCR_CONFIG_PORT_SEL); + } + fit_dbg("portsel reg: 0x%02x", portsel); + + ir_class = fintek_cir_reg_read(fintek, CIR_CR_CLASS); + fit_dbg("ir_class reg: 0x%02x", ir_class); + + switch (ir_class) { + case CLASS_RX_2TX: + case CLASS_RX_1TX: + fintek->hw_tx_capable = true; + break; + case CLASS_RX_ONLY: + default: + fintek->hw_tx_capable = false; + break; + } + + chip_major = fintek_cr_read(fintek, GCR_CHIP_ID_HI); + chip_minor = fintek_cr_read(fintek, GCR_CHIP_ID_LO); + + vendor_major = fintek_cr_read(fintek, GCR_VENDOR_ID_HI); + vendor_minor = fintek_cr_read(fintek, GCR_VENDOR_ID_LO); + vendor = vendor_major << 8 | vendor_minor; + + if (vendor != VENDOR_ID_FINTEK) + fit_pr(KERN_WARNING, "Unknown vendor ID: 0x%04x", vendor); + else + fit_dbg("Read Fintek vendor ID from chip"); + + fintek_config_mode_disable(fintek); + + spin_lock_irqsave(&fintek->fintek_lock, flags); + fintek->chip_major = chip_major; + fintek->chip_minor = chip_minor; + fintek->chip_vendor = vendor; + spin_unlock_irqrestore(&fintek->fintek_lock, flags); + + return ret; +} + +static void fintek_cir_ldev_init(struct fintek_dev *fintek) +{ + /* Select CIR logical device and enable */ + fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); + + /* Write allocated CIR address and IRQ information to hardware */ + fintek_cr_write(fintek, fintek->cir_addr >> 8, CIR_CR_BASE_ADDR_HI); + fintek_cr_write(fintek, fintek->cir_addr & 0xff, CIR_CR_BASE_ADDR_LO); + + fintek_cr_write(fintek, fintek->cir_irq, CIR_CR_IRQ_SEL); + + fit_dbg("CIR initialized, base io address: 0x%lx, irq: %d (len: %d)", + fintek->cir_addr, fintek->cir_irq, fintek->cir_port_len); +} + +/* enable CIR interrupts */ +static void fintek_enable_cir_irq(struct fintek_dev *fintek) +{ + fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS); +} + +static void fintek_cir_regs_init(struct fintek_dev *fintek) +{ + /* clear any and all stray interrupts */ + fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); + + /* and finally, enable interrupts */ + fintek_enable_cir_irq(fintek); +} + +static void fintek_enable_wake(struct fintek_dev *fintek) +{ + fintek_config_mode_enable(fintek); + fintek_select_logical_dev(fintek, LOGICAL_DEV_ACPI); + + /* Allow CIR PME's to wake system */ + fintek_set_reg_bit(fintek, ACPI_WAKE_EN_CIR_BIT, LDEV_ACPI_WAKE_EN_REG); + /* Enable CIR PME's */ + fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_EN_REG); + /* Clear CIR PME status register */ + fintek_set_reg_bit(fintek, ACPI_PME_CIR_BIT, LDEV_ACPI_PME_CLR_REG); + /* Save state */ + fintek_set_reg_bit(fintek, ACPI_STATE_CIR_BIT, LDEV_ACPI_STATE_REG); + + fintek_config_mode_disable(fintek); +} + +static int fintek_cmdsize(u8 cmd, u8 subcmd) +{ + int datasize = 0; + + switch (cmd) { + case BUF_COMMAND_NULL: + if (subcmd == BUF_HW_CMD_HEADER) + datasize = 1; + break; + case BUF_HW_CMD_HEADER: + if (subcmd == BUF_CMD_G_REVISION) + datasize = 2; + break; + case BUF_COMMAND_HEADER: + switch (subcmd) { + case BUF_CMD_S_CARRIER: + case BUF_CMD_S_TIMEOUT: + case BUF_RSP_PULSE_COUNT: + datasize = 2; + break; + case BUF_CMD_SIG_END: + case BUF_CMD_S_TXMASK: + case BUF_CMD_S_RXSENSOR: + datasize = 1; + break; + } + } + + return datasize; +} + +/* process ir data stored in driver buffer */ +static void fintek_process_rx_ir_data(struct fintek_dev *fintek) +{ + DEFINE_IR_RAW_EVENT(rawir); + u8 sample; + int i; + + for (i = 0; i < fintek->pkts; i++) { + sample = fintek->buf[i]; + switch (fintek->parser_state) { + case CMD_HEADER: + fintek->cmd = sample; + if ((fintek->cmd == BUF_COMMAND_HEADER) || + ((fintek->cmd & BUF_COMMAND_MASK) != + BUF_PULSE_BIT)) { + fintek->parser_state = SUBCMD; + continue; + } + fintek->rem = (fintek->cmd & BUF_LEN_MASK); + fit_dbg("%s: rem: 0x%02x", __func__, fintek->rem); + if (fintek->rem) + fintek->parser_state = PARSE_IRDATA; + else + ir_raw_event_reset(fintek->rdev); + break; + case SUBCMD: + fintek->rem = fintek_cmdsize(fintek->cmd, sample); + fintek->parser_state = CMD_DATA; + break; + case CMD_DATA: + fintek->rem--; + break; + case PARSE_IRDATA: + fintek->rem--; + init_ir_raw_event(&rawir); + rawir.pulse = ((sample & BUF_PULSE_BIT) != 0); + rawir.duration = US_TO_NS((sample & BUF_SAMPLE_MASK) + * CIR_SAMPLE_PERIOD); + + fit_dbg("Storing %s with duration %d", + rawir.pulse ? "pulse" : "space", + rawir.duration); + ir_raw_event_store_with_filter(fintek->rdev, &rawir); + break; + } + + if ((fintek->parser_state != CMD_HEADER) && !fintek->rem) + fintek->parser_state = CMD_HEADER; + } + + fintek->pkts = 0; + + fit_dbg("Calling ir_raw_event_handle"); + ir_raw_event_handle(fintek->rdev); +} + +/* copy data from hardware rx register into driver buffer */ +static void fintek_get_rx_ir_data(struct fintek_dev *fintek, u8 rx_irqs) +{ + unsigned long flags; + u8 sample, status; + + spin_lock_irqsave(&fintek->fintek_lock, flags); + + /* + * We must read data from CIR_RX_DATA until the hardware IR buffer + * is empty and clears the RX_TIMEOUT and/or RX_RECEIVE flags in + * the CIR_STATUS register + */ + do { + sample = fintek_cir_reg_read(fintek, CIR_RX_DATA); + fit_dbg("%s: sample: 0x%02x", __func__, sample); + + fintek->buf[fintek->pkts] = sample; + fintek->pkts++; + + status = fintek_cir_reg_read(fintek, CIR_STATUS); + if (!(status & CIR_STATUS_IRQ_EN)) + break; + } while (status & rx_irqs); + + fintek_process_rx_ir_data(fintek); + + spin_unlock_irqrestore(&fintek->fintek_lock, flags); +} + +static void fintek_cir_log_irqs(u8 status) +{ + fit_pr(KERN_INFO, "IRQ 0x%02x:%s%s%s%s%s", status, + status & CIR_STATUS_IRQ_EN ? " IRQEN" : "", + status & CIR_STATUS_TX_FINISH ? " TXF" : "", + status & CIR_STATUS_TX_UNDERRUN ? " TXU" : "", + status & CIR_STATUS_RX_TIMEOUT ? " RXTO" : "", + status & CIR_STATUS_RX_RECEIVE ? " RXOK" : ""); +} + +/* interrupt service routine for incoming and outgoing CIR data */ +static irqreturn_t fintek_cir_isr(int irq, void *data) +{ + struct fintek_dev *fintek = data; + u8 status, rx_irqs; + + fit_dbg_verbose("%s firing", __func__); + + fintek_config_mode_enable(fintek); + fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_config_mode_disable(fintek); + + /* + * Get IR Status register contents. Write 1 to ack/clear + * + * bit: reg name - description + * 3: TX_FINISH - TX is finished + * 2: TX_UNDERRUN - TX underrun + * 1: RX_TIMEOUT - RX data timeout + * 0: RX_RECEIVE - RX data received + */ + status = fintek_cir_reg_read(fintek, CIR_STATUS); + if (!(status & CIR_STATUS_IRQ_MASK) || status == 0xff) { + fit_dbg_verbose("%s exiting, IRSTS 0x%02x", __func__, status); + fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); + return IRQ_RETVAL(IRQ_NONE); + } + + if (debug) + fintek_cir_log_irqs(status); + + rx_irqs = status & (CIR_STATUS_RX_RECEIVE | CIR_STATUS_RX_TIMEOUT); + if (rx_irqs) + fintek_get_rx_ir_data(fintek, rx_irqs); + + /* ack/clear all irq flags we've got */ + fintek_cir_reg_write(fintek, status, CIR_STATUS); + + fit_dbg_verbose("%s done", __func__); + return IRQ_RETVAL(IRQ_HANDLED); +} + +static void fintek_enable_cir(struct fintek_dev *fintek) +{ + /* set IRQ enabled */ + fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_EN, CIR_STATUS); + + fintek_config_mode_enable(fintek); + + /* enable the CIR logical device */ + fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); + + fintek_config_mode_disable(fintek); + + /* clear all pending interrupts */ + fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); + + /* enable interrupts */ + fintek_enable_cir_irq(fintek); +} + +static void fintek_disable_cir(struct fintek_dev *fintek) +{ + fintek_config_mode_enable(fintek); + + /* disable the CIR logical device */ + fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN); + + fintek_config_mode_disable(fintek); +} + +static int fintek_open(struct rc_dev *dev) +{ + struct fintek_dev *fintek = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&fintek->fintek_lock, flags); + fintek_enable_cir(fintek); + spin_unlock_irqrestore(&fintek->fintek_lock, flags); + + return 0; +} + +static void fintek_close(struct rc_dev *dev) +{ + struct fintek_dev *fintek = dev->priv; + unsigned long flags; + + spin_lock_irqsave(&fintek->fintek_lock, flags); + fintek_disable_cir(fintek); + spin_unlock_irqrestore(&fintek->fintek_lock, flags); +} + +/* Allocate memory, probe hardware, and initialize everything */ +static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) +{ + struct fintek_dev *fintek; + struct rc_dev *rdev; + int ret = -ENOMEM; + + fintek = kzalloc(sizeof(struct fintek_dev), GFP_KERNEL); + if (!fintek) + return ret; + + /* input device for IR remote (and tx) */ + rdev = rc_allocate_device(); + if (!rdev) + goto failure; + + ret = -ENODEV; + /* validate pnp resources */ + if (!pnp_port_valid(pdev, 0)) { + dev_err(&pdev->dev, "IR PNP Port not valid!\n"); + goto failure; + } + + if (!pnp_irq_valid(pdev, 0)) { + dev_err(&pdev->dev, "IR PNP IRQ not valid!\n"); + goto failure; + } + + fintek->cir_addr = pnp_port_start(pdev, 0); + fintek->cir_irq = pnp_irq(pdev, 0); + fintek->cir_port_len = pnp_port_len(pdev, 0); + + fintek->cr_ip = CR_INDEX_PORT; + fintek->cr_dp = CR_DATA_PORT; + + spin_lock_init(&fintek->fintek_lock); + + ret = -EBUSY; + /* now claim resources */ + if (!request_region(fintek->cir_addr, + fintek->cir_port_len, FINTEK_DRIVER_NAME)) + goto failure; + + if (request_irq(fintek->cir_irq, fintek_cir_isr, IRQF_SHARED, + FINTEK_DRIVER_NAME, (void *)fintek)) + goto failure; + + pnp_set_drvdata(pdev, fintek); + fintek->pdev = pdev; + + ret = fintek_hw_detect(fintek); + if (ret) + goto failure; + + /* Initialize CIR & CIR Wake Logical Devices */ + fintek_config_mode_enable(fintek); + fintek_cir_ldev_init(fintek); + fintek_config_mode_disable(fintek); + + /* Initialize CIR & CIR Wake Config Registers */ + fintek_cir_regs_init(fintek); + + /* Set up the rc device */ + rdev->priv = fintek; + rdev->driver_type = RC_DRIVER_IR_RAW; + rdev->allowed_protos = RC_TYPE_ALL; + rdev->open = fintek_open; + rdev->close = fintek_close; + rdev->input_name = FINTEK_DESCRIPTION; + rdev->input_phys = "fintek/cir0"; + rdev->input_id.bustype = BUS_HOST; + rdev->input_id.vendor = VENDOR_ID_FINTEK; + rdev->input_id.product = fintek->chip_major; + rdev->input_id.version = fintek->chip_minor; + rdev->dev.parent = &pdev->dev; + rdev->driver_name = FINTEK_DRIVER_NAME; + rdev->map_name = RC_MAP_RC6_MCE; + rdev->timeout = US_TO_NS(1000); + /* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */ + rdev->rx_resolution = US_TO_NS(CIR_SAMPLE_PERIOD); + + ret = rc_register_device(rdev); + if (ret) + goto failure; + + device_init_wakeup(&pdev->dev, true); + fintek->rdev = rdev; + fit_pr(KERN_NOTICE, "driver has been successfully loaded\n"); + if (debug) + cir_dump_regs(fintek); + + return 0; + +failure: + if (fintek->cir_irq) + free_irq(fintek->cir_irq, fintek); + if (fintek->cir_addr) + release_region(fintek->cir_addr, fintek->cir_port_len); + + rc_free_device(rdev); + kfree(fintek); + + return ret; +} + +static void __devexit fintek_remove(struct pnp_dev *pdev) +{ + struct fintek_dev *fintek = pnp_get_drvdata(pdev); + unsigned long flags; + + spin_lock_irqsave(&fintek->fintek_lock, flags); + /* disable CIR */ + fintek_disable_cir(fintek); + fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); + /* enable CIR Wake (for IR power-on) */ + fintek_enable_wake(fintek); + spin_unlock_irqrestore(&fintek->fintek_lock, flags); + + /* free resources */ + free_irq(fintek->cir_irq, fintek); + release_region(fintek->cir_addr, fintek->cir_port_len); + + rc_unregister_device(fintek->rdev); + + kfree(fintek); +} + +static int fintek_suspend(struct pnp_dev *pdev, pm_message_t state) +{ + struct fintek_dev *fintek = pnp_get_drvdata(pdev); + + fit_dbg("%s called", __func__); + + /* disable all CIR interrupts */ + fintek_cir_reg_write(fintek, CIR_STATUS_IRQ_MASK, CIR_STATUS); + + fintek_config_mode_enable(fintek); + + /* disable cir logical dev */ + fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_cr_write(fintek, LOGICAL_DEV_DISABLE, CIR_CR_DEV_EN); + + fintek_config_mode_disable(fintek); + + /* make sure wake is enabled */ + fintek_enable_wake(fintek); + + return 0; +} + +static int fintek_resume(struct pnp_dev *pdev) +{ + int ret = 0; + struct fintek_dev *fintek = pnp_get_drvdata(pdev); + + fit_dbg("%s called", __func__); + + /* open interrupt */ + fintek_enable_cir_irq(fintek); + + /* Enable CIR logical device */ + fintek_config_mode_enable(fintek); + fintek_select_logical_dev(fintek, LOGICAL_DEV_CIR); + fintek_cr_write(fintek, LOGICAL_DEV_ENABLE, CIR_CR_DEV_EN); + + fintek_config_mode_disable(fintek); + + fintek_cir_regs_init(fintek); + + return ret; +} + +static void fintek_shutdown(struct pnp_dev *pdev) +{ + struct fintek_dev *fintek = pnp_get_drvdata(pdev); + fintek_enable_wake(fintek); +} + +static const struct pnp_device_id fintek_ids[] = { + { "FIT0002", 0 }, /* CIR */ + { "", 0 }, +}; + +static struct pnp_driver fintek_driver = { + .name = FINTEK_DRIVER_NAME, + .id_table = fintek_ids, + .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, + .probe = fintek_probe, + .remove = __devexit_p(fintek_remove), + .suspend = fintek_suspend, + .resume = fintek_resume, + .shutdown = fintek_shutdown, +}; + +int fintek_init(void) +{ + return pnp_register_driver(&fintek_driver); +} + +void fintek_exit(void) +{ + pnp_unregister_driver(&fintek_driver); +} + +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging output"); + +MODULE_DEVICE_TABLE(pnp, fintek_ids); +MODULE_DESCRIPTION(FINTEK_DESCRIPTION " driver"); + +MODULE_AUTHOR("Jarod Wilson "); +MODULE_LICENSE("GPL"); + +module_init(fintek_init); +module_exit(fintek_exit); diff --git a/drivers/media/rc/fintek-cir.h b/drivers/media/rc/fintek-cir.h new file mode 100644 index 000000000000..1b10b2011f5e --- /dev/null +++ b/drivers/media/rc/fintek-cir.h @@ -0,0 +1,243 @@ +/* + * Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR + * + * Copyright (C) 2011 Jarod Wilson + * + * Special thanks to Fintek for providing hardware and spec sheets. + * This driver is based upon the nuvoton, ite and ene drivers for + * similar hardware. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include + +/* platform driver name to register */ +#define FINTEK_DRIVER_NAME "fintek-cir" +#define FINTEK_DESCRIPTION "Fintek LPC SuperIO Consumer IR Transceiver" +#define VENDOR_ID_FINTEK 0x1934 + + +/* debugging module parameter */ +static int debug; + +#define fit_pr(level, text, ...) \ + printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__) + +#define fit_dbg(text, ...) \ + if (debug) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + +#define fit_dbg_verbose(text, ...) \ + if (debug > 1) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + +#define fit_dbg_wake(text, ...) \ + if (debug > 2) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + + +#define TX_BUF_LEN 256 +#define RX_BUF_LEN 32 + +struct fintek_dev { + struct pnp_dev *pdev; + struct rc_dev *rdev; + + spinlock_t fintek_lock; + + /* for rx */ + u8 buf[RX_BUF_LEN]; + unsigned int pkts; + + struct { + spinlock_t lock; + u8 buf[TX_BUF_LEN]; + unsigned int buf_count; + unsigned int cur_buf_num; + wait_queue_head_t queue; + } tx; + + /* Config register index/data port pair */ + u8 cr_ip; + u8 cr_dp; + + /* hardware I/O settings */ + unsigned long cir_addr; + int cir_irq; + int cir_port_len; + + /* hardware id */ + u8 chip_major; + u8 chip_minor; + u16 chip_vendor; + + /* hardware features */ + bool hw_learning_capable; + bool hw_tx_capable; + + /* rx settings */ + bool learning_enabled; + bool carrier_detect_enabled; + + enum { + CMD_HEADER = 0, + SUBCMD, + CMD_DATA, + PARSE_IRDATA, + } parser_state; + + u8 cmd, rem; + + /* carrier period = 1 / frequency */ + u32 carrier; +}; + +/* buffer packet constants, largely identical to mceusb.c */ +#define BUF_PULSE_BIT 0x80 +#define BUF_LEN_MASK 0x1f +#define BUF_SAMPLE_MASK 0x7f + +#define BUF_COMMAND_HEADER 0x9f +#define BUF_COMMAND_MASK 0xe0 +#define BUF_COMMAND_NULL 0x00 +#define BUF_HW_CMD_HEADER 0xff +#define BUF_CMD_G_REVISION 0x0b +#define BUF_CMD_S_CARRIER 0x06 +#define BUF_CMD_S_TIMEOUT 0x0c +#define BUF_CMD_SIG_END 0x01 +#define BUF_CMD_S_TXMASK 0x08 +#define BUF_CMD_S_RXSENSOR 0x14 +#define BUF_RSP_PULSE_COUNT 0x15 + +#define CIR_SAMPLE_PERIOD 50 + +/* + * Configuration Register: + * Index Port + * Data Port + */ +#define CR_INDEX_PORT 0x2e +#define CR_DATA_PORT 0x2f + +/* Possible alternate values, depends on how the chip is wired */ +#define CR_INDEX_PORT2 0x4e +#define CR_DATA_PORT2 0x4f + +/* + * GCR_CONFIG_PORT_SEL bit 4 specifies which Index Port value is + * active. 1 = 0x4e, 0 = 0x2e + */ +#define PORT_SEL_PORT_4E_EN 0x10 + +/* Extended Function Mode enable/disable magic values */ +#define CONFIG_REG_ENABLE 0x87 +#define CONFIG_REG_DISABLE 0xaa + +/* Chip IDs found in CR_CHIP_ID_{HI,LO} */ +#define CHIP_ID_HIGH_F71809U 0x04 +#define CHIP_ID_LOW_F71809U 0x08 + +/* + * Global control regs we need to care about: + * Global Control def. + * Register name addr val. */ +#define GCR_SOFTWARE_RESET 0x02 /* 0x00 */ +#define GCR_LOGICAL_DEV_NO 0x07 /* 0x00 */ +#define GCR_CHIP_ID_HI 0x20 /* 0x04 */ +#define GCR_CHIP_ID_LO 0x21 /* 0x08 */ +#define GCR_VENDOR_ID_HI 0x23 /* 0x19 */ +#define GCR_VENDOR_ID_LO 0x24 /* 0x34 */ +#define GCR_CONFIG_PORT_SEL 0x25 /* 0x01 */ +#define GCR_KBMOUSE_WAKEUP 0x27 + +#define LOGICAL_DEV_DISABLE 0x00 +#define LOGICAL_DEV_ENABLE 0x01 + +/* Logical device number of the CIR function */ +#define LOGICAL_DEV_CIR 0x05 + +/* CIR Logical Device (LDN 0x08) config registers */ +#define CIR_CR_COMMAND_INDEX 0x04 +#define CIR_CR_IRCS 0x05 /* Before host writes command to IR, host + must set to 1. When host finshes write + command to IR, host must clear to 0. */ +#define CIR_CR_COMMAND_DATA 0x06 /* Host read or write comand data */ +#define CIR_CR_CLASS 0x07 /* 0xff = rx-only, 0x66 = rx + 2 tx, + 0x33 = rx + 1 tx */ +#define CIR_CR_DEV_EN 0x30 /* bit0 = 1 enables CIR */ +#define CIR_CR_BASE_ADDR_HI 0x60 /* MSB of CIR IO base addr */ +#define CIR_CR_BASE_ADDR_LO 0x61 /* LSB of CIR IO base addr */ +#define CIR_CR_IRQ_SEL 0x70 /* bits3-0 store CIR IRQ */ +#define CIR_CR_PSOUT_STATUS 0xf1 +#define CIR_CR_WAKE_KEY3_ADDR 0xf8 +#define CIR_CR_WAKE_KEY3_CODE 0xf9 +#define CIR_CR_WAKE_KEY3_DC 0xfa +#define CIR_CR_WAKE_CONTROL 0xfb +#define CIR_CR_WAKE_KEY12_ADDR 0xfc +#define CIR_CR_WAKE_KEY4_ADDR 0xfd +#define CIR_CR_WAKE_KEY5_ADDR 0xfe + +#define CLASS_RX_ONLY 0xff +#define CLASS_RX_2TX 0x66 +#define CLASS_RX_1TX 0x33 + +/* CIR device registers */ +#define CIR_STATUS 0x00 +#define CIR_RX_DATA 0x01 +#define CIR_TX_CONTROL 0x02 +#define CIR_TX_DATA 0x03 +#define CIR_CONTROL 0x04 + +/* Bits to enable CIR wake */ +#define LOGICAL_DEV_ACPI 0x01 +#define LDEV_ACPI_WAKE_EN_REG 0xe8 +#define ACPI_WAKE_EN_CIR_BIT 0x04 + +#define LDEV_ACPI_PME_EN_REG 0xf0 +#define LDEV_ACPI_PME_CLR_REG 0xf1 +#define ACPI_PME_CIR_BIT 0x02 + +#define LDEV_ACPI_STATE_REG 0xf4 +#define ACPI_STATE_CIR_BIT 0x20 + +/* + * CIR status register (0x00): + * 7 - CIR_IRQ_EN (1 = enable CIR IRQ, 0 = disable) + * 3 - TX_FINISH (1 when TX finished, write 1 to clear) + * 2 - TX_UNDERRUN (1 on TX underrun, write 1 to clear) + * 1 - RX_TIMEOUT (1 on RX timeout, write 1 to clear) + * 0 - RX_RECEIVE (1 on RX receive, write 1 to clear) + */ +#define CIR_STATUS_IRQ_EN 0x80 +#define CIR_STATUS_TX_FINISH 0x08 +#define CIR_STATUS_TX_UNDERRUN 0x04 +#define CIR_STATUS_RX_TIMEOUT 0x02 +#define CIR_STATUS_RX_RECEIVE 0x01 +#define CIR_STATUS_IRQ_MASK 0x0f + +/* + * CIR TX control register (0x02): + * 7 - TX_START (1 to indicate TX start, auto-cleared when done) + * 6 - TX_END (1 to indicate TX data written to TX fifo) + */ +#define CIR_TX_CONTROL_TX_START 0x80 +#define CIR_TX_CONTROL_TX_END 0x40 + -- cgit v1.2.3 From ce14dcdba6b80b8184730201decd06d79e0080b5 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Wed, 25 May 2011 18:34:32 -0300 Subject: [media] gspca/kinect: wrap gspca_debug with GSPCA_DEBUG Fixes media_build, and presumably certain other upstream kernel build option combos. Before: CC [M] /home/jarod/src/media_build/v4l/kinect.o /home/jarod/src/media_build/v4l/kinect.c:38:19: error: 'D_ERR' undeclared here (not in a function) /home/jarod/src/media_build/v4l/kinect.c:38:27: error: 'D_PROBE' undeclared here (not in a function) /home/jarod/src/media_build/v4l/kinect.c:38:37: error: 'D_CONF' undeclared here (not in a function) /home/jarod/src/media_build/v4l/kinect.c:38:46: error: 'D_STREAM' undeclared here (not in a function) /home/jarod/src/media_build/v4l/kinect.c:38:57: error: 'D_FRAM' undeclared here (not in a function) /home/jarod/src/media_build/v4l/kinect.c:38:66: error: 'D_PACK' undeclared here (not in a function) /home/jarod/src/media_build/v4l/kinect.c:39:2: error: 'D_USBI' undeclared here (not in a function) /home/jarod/src/media_build/v4l/kinect.c:39:11: error: 'D_USBO' undeclared here (not in a function) /home/jarod/src/media_build/v4l/kinect.c:39:20: error: 'D_V4L2' undeclared here (not in a function) make[3]: *** [/home/jarod/src/media_build/v4l/kinect.o] Error 1 After: CC [M] /home/jarod/src/media_build/v4l/kinect.o ... LD [M] /home/jarod/src/media_build/v4l/gspca_kinect.ko ... profit Reported-by: Nicolas Will Signed-off-by: Jarod Wilson Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/gspca/kinect.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/gspca/kinect.c b/drivers/media/video/gspca/kinect.c index 66671a4092e4..26fc206f095e 100644 --- a/drivers/media/video/gspca/kinect.c +++ b/drivers/media/video/gspca/kinect.c @@ -34,7 +34,7 @@ MODULE_AUTHOR("Antonio Ospite "); MODULE_DESCRIPTION("GSPCA/Kinect Sensor Device USB Camera Driver"); MODULE_LICENSE("GPL"); -#ifdef DEBUG +#ifdef GSPCA_DEBUG int gspca_debug = D_ERR | D_PROBE | D_CONF | D_STREAM | D_FRAM | D_PACK | D_USBI | D_USBO | D_V4L2; #endif -- cgit v1.2.3 From 05fb85e1b26962c3003bd5ed005f30333b3d63c0 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 25 May 2011 05:34:43 -0300 Subject: [media] s5p-csis: Add missing dependency on PLAT_S5P s5p-csis is to be built only on S5P SoC platforms. Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index cf5a1f6abedf..bb53de7fe408 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -954,7 +954,7 @@ config VIDEO_SAMSUNG_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver" - depends on VIDEO_V4L2 && PM_RUNTIME && VIDEO_V4L2_SUBDEV_API + depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P && VIDEO_V4L2_SUBDEV_API ---help--- This is a v4l2 driver for Samsung S5P/EXYNOS4 MIPI-CSI receiver. -- cgit v1.2.3 From cb92d452ba665205ad6bfb424c0ef009cf26587d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 25 May 2011 16:39:00 -0400 Subject: drm/radeon/kms: add blit support for cayman (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Allows us to use the 3D engine for memory management and allows us to use vram beyond the BAR aperture. v2: fix copy paste typo Reported-by: Nils Wallménius Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/cayman_blit_shaders.c | 326 ++++++++++++++++- drivers/gpu/drm/radeon/cayman_blit_shaders.h | 3 + drivers/gpu/drm/radeon/evergreen_blit_kms.c | 505 ++++++++++++++------------- drivers/gpu/drm/radeon/ni.c | 13 +- drivers/gpu/drm/radeon/radeon_asic.c | 6 +- 5 files changed, 598 insertions(+), 255 deletions(-) diff --git a/drivers/gpu/drm/radeon/cayman_blit_shaders.c b/drivers/gpu/drm/radeon/cayman_blit_shaders.c index e148ab04b80b..7b4eeb7b4a8c 100644 --- a/drivers/gpu/drm/radeon/cayman_blit_shaders.c +++ b/drivers/gpu/drm/radeon/cayman_blit_shaders.c @@ -39,17 +39,335 @@ const u32 cayman_default_state[] = { - /* XXX fill in additional blit state */ + 0xc0066900, + 0x00000000, + 0x00000060, /* DB_RENDER_CONTROL */ + 0x00000000, /* DB_COUNT_CONTROL */ + 0x00000000, /* DB_DEPTH_VIEW */ + 0x0000002a, /* DB_RENDER_OVERRIDE */ + 0x00000000, /* DB_RENDER_OVERRIDE2 */ + 0x00000000, /* DB_HTILE_DATA_BASE */ 0xc0026900, - 0x00000316, - 0x0000000e, /* VGT_VERTEX_REUSE_BLOCK_CNTL */ - 0x00000010, /* */ + 0x0000000a, + 0x00000000, /* DB_STENCIL_CLEAR */ + 0x00000000, /* DB_DEPTH_CLEAR */ + + 0xc0036900, + 0x0000000f, + 0x00000000, /* DB_DEPTH_INFO */ + 0x00000000, /* DB_Z_INFO */ + 0x00000000, /* DB_STENCIL_INFO */ + + 0xc0016900, + 0x00000080, + 0x00000000, /* PA_SC_WINDOW_OFFSET */ + + 0xc00d6900, + 0x00000083, + 0x0000ffff, /* PA_SC_CLIPRECT_RULE */ + 0x00000000, /* PA_SC_CLIPRECT_0_TL */ + 0x20002000, /* PA_SC_CLIPRECT_0_BR */ + 0x00000000, + 0x20002000, + 0x00000000, + 0x20002000, + 0x00000000, + 0x20002000, + 0xaaaaaaaa, /* PA_SC_EDGERULE */ + 0x00000000, /* PA_SU_HARDWARE_SCREEN_OFFSET */ + 0x0000000f, /* CB_TARGET_MASK */ + 0x0000000f, /* CB_SHADER_MASK */ + + 0xc0226900, + 0x00000094, + 0x80000000, /* PA_SC_VPORT_SCISSOR_0_TL */ + 0x20002000, /* PA_SC_VPORT_SCISSOR_0_BR */ + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x80000000, + 0x20002000, + 0x00000000, /* PA_SC_VPORT_ZMIN_0 */ + 0x3f800000, /* PA_SC_VPORT_ZMAX_0 */ + + 0xc0016900, + 0x000000d4, + 0x00000000, /* SX_MISC */ 0xc0026900, 0x000000d9, 0x00000000, /* CP_RINGID */ 0x00000000, /* CP_VMID */ + + 0xc0096900, + 0x00000100, + 0x00ffffff, /* VGT_MAX_VTX_INDX */ + 0x00000000, /* VGT_MIN_VTX_INDX */ + 0x00000000, /* VGT_INDX_OFFSET */ + 0x00000000, /* VGT_MULTI_PRIM_IB_RESET_INDX */ + 0x00000000, /* SX_ALPHA_TEST_CONTROL */ + 0x00000000, /* CB_BLEND_RED */ + 0x00000000, /* CB_BLEND_GREEN */ + 0x00000000, /* CB_BLEND_BLUE */ + 0x00000000, /* CB_BLEND_ALPHA */ + + 0xc0016900, + 0x00000187, + 0x00000100, /* SPI_VS_OUT_ID_0 */ + + 0xc0026900, + 0x00000191, + 0x00000100, /* SPI_PS_INPUT_CNTL_0 */ + 0x00000101, /* SPI_PS_INPUT_CNTL_1 */ + + 0xc0016900, + 0x000001b1, + 0x00000000, /* SPI_VS_OUT_CONFIG */ + + 0xc0106900, + 0x000001b3, + 0x20000001, /* SPI_PS_IN_CONTROL_0 */ + 0x00000000, /* SPI_PS_IN_CONTROL_1 */ + 0x00000000, /* SPI_INTERP_CONTROL_0 */ + 0x00000000, /* SPI_INPUT_Z */ + 0x00000000, /* SPI_FOG_CNTL */ + 0x00100000, /* SPI_BARYC_CNTL */ + 0x00000000, /* SPI_PS_IN_CONTROL_2 */ + 0x00000000, /* SPI_COMPUTE_INPUT_CNTL */ + 0x00000000, /* SPI_COMPUTE_NUM_THREAD_X */ + 0x00000000, /* SPI_COMPUTE_NUM_THREAD_Y */ + 0x00000000, /* SPI_COMPUTE_NUM_THREAD_Z */ + 0x00000000, /* SPI_GPR_MGMT */ + 0x00000000, /* SPI_LDS_MGMT */ + 0x00000000, /* SPI_STACK_MGMT */ + 0x00000000, /* SPI_WAVE_MGMT_1 */ + 0x00000000, /* SPI_WAVE_MGMT_2 */ + + 0xc0016900, + 0x000001e0, + 0x00000000, /* CB_BLEND0_CONTROL */ + + 0xc00e6900, + 0x00000200, + 0x00000000, /* DB_DEPTH_CONTROL */ + 0x00000000, /* DB_EQAA */ + 0x00cc0010, /* CB_COLOR_CONTROL */ + 0x00000210, /* DB_SHADER_CONTROL */ + 0x00010000, /* PA_CL_CLIP_CNTL */ + 0x00000004, /* PA_SU_SC_MODE_CNTL */ + 0x00000100, /* PA_CL_VTE_CNTL */ + 0x00000000, /* PA_CL_VS_OUT_CNTL */ + 0x00000000, /* PA_CL_NANINF_CNTL */ + 0x00000000, /* PA_SU_LINE_STIPPLE_CNTL */ + 0x00000000, /* PA_SU_LINE_STIPPLE_SCALE */ + 0x00000000, /* PA_SU_PRIM_FILTER_CNTL */ + 0x00000000, /* */ + 0x00000000, /* */ + + 0xc0026900, + 0x00000229, + 0x00000000, /* SQ_PGM_START_FS */ + 0x00000000, + + 0xc0016900, + 0x0000023b, + 0x00000000, /* SQ_LDS_ALLOC_PS */ + + 0xc0066900, + 0x00000240, + 0x00000000, /* SQ_ESGS_RING_ITEMSIZE */ + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + + 0xc0046900, + 0x00000247, + 0x00000000, /* SQ_GS_VERT_ITEMSIZE */ + 0x00000000, + 0x00000000, + 0x00000000, + + 0xc0116900, + 0x00000280, + 0x00000000, /* PA_SU_POINT_SIZE */ + 0x00000000, /* PA_SU_POINT_MINMAX */ + 0x00000008, /* PA_SU_LINE_CNTL */ + 0x00000000, /* PA_SC_LINE_STIPPLE */ + 0x00000000, /* VGT_OUTPUT_PATH_CNTL */ + 0x00000000, /* VGT_HOS_CNTL */ + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, /* VGT_GS_MODE */ + + 0xc0026900, + 0x00000292, + 0x00000000, /* PA_SC_MODE_CNTL_0 */ + 0x00000000, /* PA_SC_MODE_CNTL_1 */ + + 0xc0016900, + 0x000002a1, + 0x00000000, /* VGT_PRIMITIVEID_EN */ + + 0xc0016900, + 0x000002a5, + 0x00000000, /* VGT_MULTI_PRIM_IB_RESET_EN */ + + 0xc0026900, + 0x000002a8, + 0x00000000, /* VGT_INSTANCE_STEP_RATE_0 */ + 0x00000000, + + 0xc0026900, + 0x000002ad, + 0x00000000, /* VGT_REUSE_OFF */ + 0x00000000, + + 0xc0016900, + 0x000002d5, + 0x00000000, /* VGT_SHADER_STAGES_EN */ + + 0xc0016900, + 0x000002dc, + 0x0000aa00, /* DB_ALPHA_TO_MASK */ + + 0xc0066900, + 0x000002de, + 0x00000000, /* PA_SU_POLY_OFFSET_DB_FMT_CNTL */ + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + + 0xc0026900, + 0x000002e5, + 0x00000000, /* VGT_STRMOUT_CONFIG */ + 0x00000000, + + 0xc01b6900, + 0x000002f5, + 0x76543210, /* PA_SC_CENTROID_PRIORITY_0 */ + 0xfedcba98, /* PA_SC_CENTROID_PRIORITY_1 */ + 0x00000000, /* PA_SC_LINE_CNTL */ + 0x00000000, /* PA_SC_AA_CONFIG */ + 0x00000005, /* PA_SU_VTX_CNTL */ + 0x3f800000, /* PA_CL_GB_VERT_CLIP_ADJ */ + 0x3f800000, /* PA_CL_GB_VERT_DISC_ADJ */ + 0x3f800000, /* PA_CL_GB_HORZ_CLIP_ADJ */ + 0x3f800000, /* PA_CL_GB_HORZ_DISC_ADJ */ + 0x00000000, /* PA_SC_AA_SAMPLE_LOCS_PIXEL_X0Y0_0 */ + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0xffffffff, /* PA_SC_AA_MASK_X0Y0_X1Y0 */ + 0xffffffff, + + 0xc0026900, + 0x00000316, + 0x0000000e, /* VGT_VERTEX_REUSE_BLOCK_CNTL */ + 0x00000010, /* */ +}; + +const u32 cayman_vs[] = +{ + 0x00000004, + 0x80400400, + 0x0000a03c, + 0x95000688, + 0x00004000, + 0x15000688, + 0x00000000, + 0x88000000, + 0x04000000, + 0x67961001, +#ifdef __BIG_ENDIAN + 0x00020000, +#else + 0x00000000, +#endif + 0x00000000, + 0x04000000, + 0x67961000, +#ifdef __BIG_ENDIAN + 0x00020008, +#else + 0x00000008, +#endif + 0x00000000, +}; + +const u32 cayman_ps[] = +{ + 0x00000004, + 0xa00c0000, + 0x00000008, + 0x80400000, + 0x00000000, + 0x95000688, + 0x00000000, + 0x88000000, + 0x00380400, + 0x00146b10, + 0x00380000, + 0x20146b10, + 0x00380400, + 0x40146b00, + 0x80380000, + 0x60146b00, + 0x00000010, + 0x000d1000, + 0xb0800000, + 0x00000000, }; +const u32 cayman_ps_size = ARRAY_SIZE(cayman_ps); +const u32 cayman_vs_size = ARRAY_SIZE(cayman_vs); const u32 cayman_default_size = ARRAY_SIZE(cayman_default_state); diff --git a/drivers/gpu/drm/radeon/cayman_blit_shaders.h b/drivers/gpu/drm/radeon/cayman_blit_shaders.h index 33b75e5d0fa4..f5d0e9a60267 100644 --- a/drivers/gpu/drm/radeon/cayman_blit_shaders.h +++ b/drivers/gpu/drm/radeon/cayman_blit_shaders.h @@ -25,8 +25,11 @@ #ifndef CAYMAN_BLIT_SHADERS_H #define CAYMAN_BLIT_SHADERS_H +extern const u32 cayman_ps[]; +extern const u32 cayman_vs[]; extern const u32 cayman_default_state[]; +extern const u32 cayman_ps_size, cayman_vs_size; extern const u32 cayman_default_size; #endif diff --git a/drivers/gpu/drm/radeon/evergreen_blit_kms.c b/drivers/gpu/drm/radeon/evergreen_blit_kms.c index 40867290863c..a60ad28b0389 100644 --- a/drivers/gpu/drm/radeon/evergreen_blit_kms.c +++ b/drivers/gpu/drm/radeon/evergreen_blit_kms.c @@ -31,6 +31,7 @@ #include "evergreend.h" #include "evergreen_blit_shaders.h" +#include "cayman_blit_shaders.h" #define DI_PT_RECTLIST 0x11 #define DI_INDEX_SIZE_16_BIT 0x0 @@ -265,238 +266,240 @@ set_default_state(struct radeon_device *rdev) u64 gpu_addr; int dwords; - switch (rdev->family) { - case CHIP_CEDAR: - default: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 96; - num_vs_threads = 16; - num_gs_threads = 16; - num_es_threads = 16; - num_hs_threads = 16; - num_ls_threads = 16; - num_ps_stack_entries = 42; - num_vs_stack_entries = 42; - num_gs_stack_entries = 42; - num_es_stack_entries = 42; - num_hs_stack_entries = 42; - num_ls_stack_entries = 42; - break; - case CHIP_REDWOOD: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 20; - num_gs_threads = 20; - num_es_threads = 20; - num_hs_threads = 20; - num_ls_threads = 20; - num_ps_stack_entries = 42; - num_vs_stack_entries = 42; - num_gs_stack_entries = 42; - num_es_stack_entries = 42; - num_hs_stack_entries = 42; - num_ls_stack_entries = 42; - break; - case CHIP_JUNIPER: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 20; - num_gs_threads = 20; - num_es_threads = 20; - num_hs_threads = 20; - num_ls_threads = 20; - num_ps_stack_entries = 85; - num_vs_stack_entries = 85; - num_gs_stack_entries = 85; - num_es_stack_entries = 85; - num_hs_stack_entries = 85; - num_ls_stack_entries = 85; - break; - case CHIP_CYPRESS: - case CHIP_HEMLOCK: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 20; - num_gs_threads = 20; - num_es_threads = 20; - num_hs_threads = 20; - num_ls_threads = 20; - num_ps_stack_entries = 85; - num_vs_stack_entries = 85; - num_gs_stack_entries = 85; - num_es_stack_entries = 85; - num_hs_stack_entries = 85; - num_ls_stack_entries = 85; - break; - case CHIP_PALM: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 96; - num_vs_threads = 16; - num_gs_threads = 16; - num_es_threads = 16; - num_hs_threads = 16; - num_ls_threads = 16; - num_ps_stack_entries = 42; - num_vs_stack_entries = 42; - num_gs_stack_entries = 42; - num_es_stack_entries = 42; - num_hs_stack_entries = 42; - num_ls_stack_entries = 42; - break; - case CHIP_BARTS: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 20; - num_gs_threads = 20; - num_es_threads = 20; - num_hs_threads = 20; - num_ls_threads = 20; - num_ps_stack_entries = 85; - num_vs_stack_entries = 85; - num_gs_stack_entries = 85; - num_es_stack_entries = 85; - num_hs_stack_entries = 85; - num_ls_stack_entries = 85; - break; - case CHIP_TURKS: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 20; - num_gs_threads = 20; - num_es_threads = 20; - num_hs_threads = 20; - num_ls_threads = 20; - num_ps_stack_entries = 42; - num_vs_stack_entries = 42; - num_gs_stack_entries = 42; - num_es_stack_entries = 42; - num_hs_stack_entries = 42; - num_ls_stack_entries = 42; - break; - case CHIP_CAICOS: - num_ps_gprs = 93; - num_vs_gprs = 46; - num_temp_gprs = 4; - num_gs_gprs = 31; - num_es_gprs = 31; - num_hs_gprs = 23; - num_ls_gprs = 23; - num_ps_threads = 128; - num_vs_threads = 10; - num_gs_threads = 10; - num_es_threads = 10; - num_hs_threads = 10; - num_ls_threads = 10; - num_ps_stack_entries = 42; - num_vs_stack_entries = 42; - num_gs_stack_entries = 42; - num_es_stack_entries = 42; - num_hs_stack_entries = 42; - num_ls_stack_entries = 42; - break; - } - - if ((rdev->family == CHIP_CEDAR) || - (rdev->family == CHIP_PALM) || - (rdev->family == CHIP_CAICOS)) - sq_config = 0; - else - sq_config = VC_ENABLE; - - sq_config |= (EXPORT_SRC_C | - CS_PRIO(0) | - LS_PRIO(0) | - HS_PRIO(0) | - PS_PRIO(0) | - VS_PRIO(1) | - GS_PRIO(2) | - ES_PRIO(3)); - - sq_gpr_resource_mgmt_1 = (NUM_PS_GPRS(num_ps_gprs) | - NUM_VS_GPRS(num_vs_gprs) | - NUM_CLAUSE_TEMP_GPRS(num_temp_gprs)); - sq_gpr_resource_mgmt_2 = (NUM_GS_GPRS(num_gs_gprs) | - NUM_ES_GPRS(num_es_gprs)); - sq_gpr_resource_mgmt_3 = (NUM_HS_GPRS(num_hs_gprs) | - NUM_LS_GPRS(num_ls_gprs)); - sq_thread_resource_mgmt = (NUM_PS_THREADS(num_ps_threads) | - NUM_VS_THREADS(num_vs_threads) | - NUM_GS_THREADS(num_gs_threads) | - NUM_ES_THREADS(num_es_threads)); - sq_thread_resource_mgmt_2 = (NUM_HS_THREADS(num_hs_threads) | - NUM_LS_THREADS(num_ls_threads)); - sq_stack_resource_mgmt_1 = (NUM_PS_STACK_ENTRIES(num_ps_stack_entries) | - NUM_VS_STACK_ENTRIES(num_vs_stack_entries)); - sq_stack_resource_mgmt_2 = (NUM_GS_STACK_ENTRIES(num_gs_stack_entries) | - NUM_ES_STACK_ENTRIES(num_es_stack_entries)); - sq_stack_resource_mgmt_3 = (NUM_HS_STACK_ENTRIES(num_hs_stack_entries) | - NUM_LS_STACK_ENTRIES(num_ls_stack_entries)); - /* set clear context state */ radeon_ring_write(rdev, PACKET3(PACKET3_CLEAR_STATE, 0)); radeon_ring_write(rdev, 0); - /* disable dyn gprs */ - radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1)); - radeon_ring_write(rdev, (SQ_DYN_GPR_CNTL_PS_FLUSH_REQ - PACKET3_SET_CONFIG_REG_START) >> 2); - radeon_ring_write(rdev, 0); + if (rdev->family < CHIP_CAYMAN) { + switch (rdev->family) { + case CHIP_CEDAR: + default: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 96; + num_vs_threads = 16; + num_gs_threads = 16; + num_es_threads = 16; + num_hs_threads = 16; + num_ls_threads = 16; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + case CHIP_REDWOOD: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 20; + num_gs_threads = 20; + num_es_threads = 20; + num_hs_threads = 20; + num_ls_threads = 20; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + case CHIP_JUNIPER: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 20; + num_gs_threads = 20; + num_es_threads = 20; + num_hs_threads = 20; + num_ls_threads = 20; + num_ps_stack_entries = 85; + num_vs_stack_entries = 85; + num_gs_stack_entries = 85; + num_es_stack_entries = 85; + num_hs_stack_entries = 85; + num_ls_stack_entries = 85; + break; + case CHIP_CYPRESS: + case CHIP_HEMLOCK: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 20; + num_gs_threads = 20; + num_es_threads = 20; + num_hs_threads = 20; + num_ls_threads = 20; + num_ps_stack_entries = 85; + num_vs_stack_entries = 85; + num_gs_stack_entries = 85; + num_es_stack_entries = 85; + num_hs_stack_entries = 85; + num_ls_stack_entries = 85; + break; + case CHIP_PALM: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 96; + num_vs_threads = 16; + num_gs_threads = 16; + num_es_threads = 16; + num_hs_threads = 16; + num_ls_threads = 16; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + case CHIP_BARTS: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 20; + num_gs_threads = 20; + num_es_threads = 20; + num_hs_threads = 20; + num_ls_threads = 20; + num_ps_stack_entries = 85; + num_vs_stack_entries = 85; + num_gs_stack_entries = 85; + num_es_stack_entries = 85; + num_hs_stack_entries = 85; + num_ls_stack_entries = 85; + break; + case CHIP_TURKS: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 20; + num_gs_threads = 20; + num_es_threads = 20; + num_hs_threads = 20; + num_ls_threads = 20; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + case CHIP_CAICOS: + num_ps_gprs = 93; + num_vs_gprs = 46; + num_temp_gprs = 4; + num_gs_gprs = 31; + num_es_gprs = 31; + num_hs_gprs = 23; + num_ls_gprs = 23; + num_ps_threads = 128; + num_vs_threads = 10; + num_gs_threads = 10; + num_es_threads = 10; + num_hs_threads = 10; + num_ls_threads = 10; + num_ps_stack_entries = 42; + num_vs_stack_entries = 42; + num_gs_stack_entries = 42; + num_es_stack_entries = 42; + num_hs_stack_entries = 42; + num_ls_stack_entries = 42; + break; + } - /* SQ config */ - radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 11)); - radeon_ring_write(rdev, (SQ_CONFIG - PACKET3_SET_CONFIG_REG_START) >> 2); - radeon_ring_write(rdev, sq_config); - radeon_ring_write(rdev, sq_gpr_resource_mgmt_1); - radeon_ring_write(rdev, sq_gpr_resource_mgmt_2); - radeon_ring_write(rdev, sq_gpr_resource_mgmt_3); - radeon_ring_write(rdev, 0); - radeon_ring_write(rdev, 0); - radeon_ring_write(rdev, sq_thread_resource_mgmt); - radeon_ring_write(rdev, sq_thread_resource_mgmt_2); - radeon_ring_write(rdev, sq_stack_resource_mgmt_1); - radeon_ring_write(rdev, sq_stack_resource_mgmt_2); - radeon_ring_write(rdev, sq_stack_resource_mgmt_3); + if ((rdev->family == CHIP_CEDAR) || + (rdev->family == CHIP_PALM) || + (rdev->family == CHIP_CAICOS)) + sq_config = 0; + else + sq_config = VC_ENABLE; + + sq_config |= (EXPORT_SRC_C | + CS_PRIO(0) | + LS_PRIO(0) | + HS_PRIO(0) | + PS_PRIO(0) | + VS_PRIO(1) | + GS_PRIO(2) | + ES_PRIO(3)); + + sq_gpr_resource_mgmt_1 = (NUM_PS_GPRS(num_ps_gprs) | + NUM_VS_GPRS(num_vs_gprs) | + NUM_CLAUSE_TEMP_GPRS(num_temp_gprs)); + sq_gpr_resource_mgmt_2 = (NUM_GS_GPRS(num_gs_gprs) | + NUM_ES_GPRS(num_es_gprs)); + sq_gpr_resource_mgmt_3 = (NUM_HS_GPRS(num_hs_gprs) | + NUM_LS_GPRS(num_ls_gprs)); + sq_thread_resource_mgmt = (NUM_PS_THREADS(num_ps_threads) | + NUM_VS_THREADS(num_vs_threads) | + NUM_GS_THREADS(num_gs_threads) | + NUM_ES_THREADS(num_es_threads)); + sq_thread_resource_mgmt_2 = (NUM_HS_THREADS(num_hs_threads) | + NUM_LS_THREADS(num_ls_threads)); + sq_stack_resource_mgmt_1 = (NUM_PS_STACK_ENTRIES(num_ps_stack_entries) | + NUM_VS_STACK_ENTRIES(num_vs_stack_entries)); + sq_stack_resource_mgmt_2 = (NUM_GS_STACK_ENTRIES(num_gs_stack_entries) | + NUM_ES_STACK_ENTRIES(num_es_stack_entries)); + sq_stack_resource_mgmt_3 = (NUM_HS_STACK_ENTRIES(num_hs_stack_entries) | + NUM_LS_STACK_ENTRIES(num_ls_stack_entries)); + + /* disable dyn gprs */ + radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 1)); + radeon_ring_write(rdev, (SQ_DYN_GPR_CNTL_PS_FLUSH_REQ - PACKET3_SET_CONFIG_REG_START) >> 2); + radeon_ring_write(rdev, 0); + + /* SQ config */ + radeon_ring_write(rdev, PACKET3(PACKET3_SET_CONFIG_REG, 11)); + radeon_ring_write(rdev, (SQ_CONFIG - PACKET3_SET_CONFIG_REG_START) >> 2); + radeon_ring_write(rdev, sq_config); + radeon_ring_write(rdev, sq_gpr_resource_mgmt_1); + radeon_ring_write(rdev, sq_gpr_resource_mgmt_2); + radeon_ring_write(rdev, sq_gpr_resource_mgmt_3); + radeon_ring_write(rdev, 0); + radeon_ring_write(rdev, 0); + radeon_ring_write(rdev, sq_thread_resource_mgmt); + radeon_ring_write(rdev, sq_thread_resource_mgmt_2); + radeon_ring_write(rdev, sq_stack_resource_mgmt_1); + radeon_ring_write(rdev, sq_stack_resource_mgmt_2); + radeon_ring_write(rdev, sq_stack_resource_mgmt_3); + } /* CONTEXT_CONTROL */ radeon_ring_write(rdev, 0xc0012800); @@ -570,7 +573,10 @@ int evergreen_blit_init(struct radeon_device *rdev) mutex_init(&rdev->r600_blit.mutex); rdev->r600_blit.state_offset = 0; - rdev->r600_blit.state_len = evergreen_default_size; + if (rdev->family < CHIP_CAYMAN) + rdev->r600_blit.state_len = evergreen_default_size; + else + rdev->r600_blit.state_len = cayman_default_size; dwords = rdev->r600_blit.state_len; while (dwords & 0xf) { @@ -582,11 +588,17 @@ int evergreen_blit_init(struct radeon_device *rdev) obj_size = ALIGN(obj_size, 256); rdev->r600_blit.vs_offset = obj_size; - obj_size += evergreen_vs_size * 4; + if (rdev->family < CHIP_CAYMAN) + obj_size += evergreen_vs_size * 4; + else + obj_size += cayman_vs_size * 4; obj_size = ALIGN(obj_size, 256); rdev->r600_blit.ps_offset = obj_size; - obj_size += evergreen_ps_size * 4; + if (rdev->family < CHIP_CAYMAN) + obj_size += evergreen_ps_size * 4; + else + obj_size += cayman_ps_size * 4; obj_size = ALIGN(obj_size, 256); r = radeon_bo_create(rdev, obj_size, PAGE_SIZE, true, RADEON_GEM_DOMAIN_VRAM, @@ -609,16 +621,29 @@ int evergreen_blit_init(struct radeon_device *rdev) return r; } - memcpy_toio(ptr + rdev->r600_blit.state_offset, - evergreen_default_state, rdev->r600_blit.state_len * 4); - - if (num_packet2s) - memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4), - packet2s, num_packet2s * 4); - for (i = 0; i < evergreen_vs_size; i++) - *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(evergreen_vs[i]); - for (i = 0; i < evergreen_ps_size; i++) - *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(evergreen_ps[i]); + if (rdev->family < CHIP_CAYMAN) { + memcpy_toio(ptr + rdev->r600_blit.state_offset, + evergreen_default_state, rdev->r600_blit.state_len * 4); + + if (num_packet2s) + memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4), + packet2s, num_packet2s * 4); + for (i = 0; i < evergreen_vs_size; i++) + *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(evergreen_vs[i]); + for (i = 0; i < evergreen_ps_size; i++) + *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(evergreen_ps[i]); + } else { + memcpy_toio(ptr + rdev->r600_blit.state_offset, + cayman_default_state, rdev->r600_blit.state_len * 4); + + if (num_packet2s) + memcpy_toio(ptr + rdev->r600_blit.state_offset + (rdev->r600_blit.state_len * 4), + packet2s, num_packet2s * 4); + for (i = 0; i < cayman_vs_size; i++) + *(u32 *)((unsigned long)ptr + rdev->r600_blit.vs_offset + i * 4) = cpu_to_le32(cayman_vs[i]); + for (i = 0; i < cayman_ps_size; i++) + *(u32 *)((unsigned long)ptr + rdev->r600_blit.ps_offset + i * 4) = cpu_to_le32(cayman_ps[i]); + } radeon_bo_kunmap(rdev->r600_blit.shader_obj); radeon_bo_unreserve(rdev->r600_blit.shader_obj); diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index a0cc7a5ff031..c023b0ad89f4 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1387,14 +1387,12 @@ static int cayman_startup(struct radeon_device *rdev) return r; cayman_gpu_init(rdev); -#if 0 - r = cayman_blit_init(rdev); + r = evergreen_blit_init(rdev); if (r) { - cayman_blit_fini(rdev); + evergreen_blit_fini(rdev); rdev->asic->copy = NULL; dev_warn(rdev->dev, "failed blitter (%d) falling back to memcpy\n", r); } -#endif /* allocate wb buffer */ r = radeon_wb_init(rdev); @@ -1452,7 +1450,7 @@ int cayman_resume(struct radeon_device *rdev) int cayman_suspend(struct radeon_device *rdev) { - /* int r; */ + int r; /* FIXME: we should wait for ring to be empty */ cayman_cp_enable(rdev, false); @@ -1461,14 +1459,13 @@ int cayman_suspend(struct radeon_device *rdev) radeon_wb_disable(rdev); cayman_pcie_gart_disable(rdev); -#if 0 /* unpin shaders bo */ r = radeon_bo_reserve(rdev->r600_blit.shader_obj, false); if (likely(r == 0)) { radeon_bo_unpin(rdev->r600_blit.shader_obj); radeon_bo_unreserve(rdev->r600_blit.shader_obj); } -#endif + return 0; } @@ -1580,7 +1577,7 @@ int cayman_init(struct radeon_device *rdev) void cayman_fini(struct radeon_device *rdev) { - /* cayman_blit_fini(rdev); */ + evergreen_blit_fini(rdev); cayman_cp_fini(rdev); r600_irq_fini(rdev); radeon_wb_fini(rdev); diff --git a/drivers/gpu/drm/radeon/radeon_asic.c b/drivers/gpu/drm/radeon/radeon_asic.c index d948265db87e..b9b3c2a2b119 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.c +++ b/drivers/gpu/drm/radeon/radeon_asic.c @@ -906,9 +906,9 @@ static struct radeon_asic cayman_asic = { .get_vblank_counter = &evergreen_get_vblank_counter, .fence_ring_emit = &r600_fence_ring_emit, .cs_parse = &evergreen_cs_parse, - .copy_blit = NULL, - .copy_dma = NULL, - .copy = NULL, + .copy_blit = &evergreen_copy_blit, + .copy_dma = &evergreen_copy_blit, + .copy = &evergreen_copy_blit, .get_engine_clock = &radeon_atom_get_engine_clock, .set_engine_clock = &radeon_atom_set_engine_clock, .get_memory_clock = &radeon_atom_get_memory_clock, -- cgit v1.2.3 From 457558eda1545c22163574f6dbb883394705e9dd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 25 May 2011 17:49:54 -0400 Subject: drm/radeon/kms: add missing case for cayman thermal sensor The rest of the code is already in place. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_pm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index 86eda1ea94df..aaa19dc418a0 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -487,6 +487,7 @@ static int radeon_hwmon_init(struct radeon_device *rdev) case THERMAL_TYPE_RV6XX: case THERMAL_TYPE_RV770: case THERMAL_TYPE_EVERGREEN: + case THERMAL_TYPE_NI: case THERMAL_TYPE_SUMO: rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev); if (IS_ERR(rdev->pm.int_hwmon_dev)) { -- cgit v1.2.3 From 67b3f823ec78d08aea8835bce2655674237abc1d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 25 May 2011 18:45:37 -0400 Subject: drm/radeon/kms: fix thermal sensor reading on juniper Uses a different method than other evergreen asics. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/evergreen.c | 46 ++++++++++++++++++++++++++----------- drivers/gpu/drm/radeon/evergreend.h | 8 ++++++- 2 files changed, 39 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 34cd5a878088..8f446aadccd6 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -88,21 +88,39 @@ u32 evergreen_page_flip(struct radeon_device *rdev, int crtc_id, u64 crtc_base) /* get temperature in millidegrees */ int evergreen_get_temp(struct radeon_device *rdev) { - u32 temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >> - ASIC_T_SHIFT; - u32 actual_temp = 0; - - if (temp & 0x400) - actual_temp = -256; - else if (temp & 0x200) - actual_temp = 255; - else if (temp & 0x100) { - actual_temp = temp & 0x1ff; - actual_temp |= ~0x1ff; - } else - actual_temp = temp & 0xff; + u32 temp, toffset, actual_temp = 0; + + if (rdev->family == CHIP_JUNIPER) { + toffset = (RREG32(CG_THERMAL_CTRL) & TOFFSET_MASK) >> + TOFFSET_SHIFT; + temp = (RREG32(CG_TS0_STATUS) & TS0_ADC_DOUT_MASK) >> + TS0_ADC_DOUT_SHIFT; + + if (toffset & 0x100) + actual_temp = temp / 2 - (0x200 - toffset); + else + actual_temp = temp / 2 + toffset; + + actual_temp = actual_temp * 1000; + + } else { + temp = (RREG32(CG_MULT_THERMAL_STATUS) & ASIC_T_MASK) >> + ASIC_T_SHIFT; + + if (temp & 0x400) + actual_temp = -256; + else if (temp & 0x200) + actual_temp = 255; + else if (temp & 0x100) { + actual_temp = temp & 0x1ff; + actual_temp |= ~0x1ff; + } else + actual_temp = temp & 0xff; + + actual_temp = (actual_temp * 1000) / 2; + } - return (actual_temp * 1000) / 2; + return actual_temp; } int sumo_get_temp(struct radeon_device *rdev) diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index 75b57e394f2b..103250ff3cbe 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -168,10 +168,16 @@ #define SE_DB_BUSY (1 << 30) #define SE_CB_BUSY (1 << 31) /* evergreen */ +#define CG_THERMAL_CTRL 0x72c +#define TOFFSET_MASK 0x00003FE0 +#define TOFFSET_SHIFT 5 #define CG_MULT_THERMAL_STATUS 0x740 #define ASIC_T(x) ((x) << 16) -#define ASIC_T_MASK 0x7FF0000 +#define ASIC_T_MASK 0x07FF0000 #define ASIC_T_SHIFT 16 +#define CG_TS0_STATUS 0x760 +#define TS0_ADC_DOUT_MASK 0x000003FF +#define TS0_ADC_DOUT_SHIFT 0 /* APU */ #define CG_THERMAL_STATUS 0x678 -- cgit v1.2.3 From 2f2f96d1ea72e6602ae440ac2867a6004edb37a1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 25 May 2011 12:51:44 -0400 Subject: drm/radeon/kms: clean up the radeon kms Kconfig - no longer in staging - all radeons supported Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/Kconfig | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/gpu/drm/radeon/Kconfig b/drivers/gpu/drm/radeon/Kconfig index 9746fee59f56..ea92bbe3ed37 100644 --- a/drivers/gpu/drm/radeon/Kconfig +++ b/drivers/gpu/drm/radeon/Kconfig @@ -28,11 +28,4 @@ config DRM_RADEON_KMS The kernel will also perform security check on command stream provided by the user, we want to catch and forbid any illegal use of the GPU such as DMA into random system memory or into memory - not owned by the process supplying the command stream. This part - of the code is still incomplete and this why we propose that patch - as a staging driver addition, future security might forbid current - experimental userspace to run. - - This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX - (radeon up to X1950). Works is underway to provide support for R6XX, - R7XX and newer hardware (radeon from HD2XXX to HD4XXX). + not owned by the process supplying the command stream. -- cgit v1.2.3 From f29c50419c8d1998edd759f1990c4243a248f469 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 19 May 2011 14:35:33 -0400 Subject: maccess,probe_kernel: Make write/read src const void * The functions probe_kernel_write() and probe_kernel_read() do not modify the src pointer. Allow const pointers to be passed in without the need of a typecast. Acked-by: Mike Frysinger Acked-by: Heiko Carstens Acked-by: Martin Schwidefsky Signed-off-by: Steven Rostedt Link: http://lkml.kernel.org/r/1305824936.1465.4.camel@gandalf.stny.rr.com --- arch/blackfin/mm/maccess.c | 4 ++-- arch/s390/mm/maccess.c | 4 ++-- include/linux/uaccess.h | 8 ++++---- mm/maccess.c | 8 ++++---- 4 files changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/blackfin/mm/maccess.c b/arch/blackfin/mm/maccess.c index b71cebc1f8a3..e2532114c5fd 100644 --- a/arch/blackfin/mm/maccess.c +++ b/arch/blackfin/mm/maccess.c @@ -16,7 +16,7 @@ static int validate_memory_access_address(unsigned long addr, int size) return bfin_mem_access_type(addr, size); } -long probe_kernel_read(void *dst, void *src, size_t size) +long probe_kernel_read(void *dst, const void *src, size_t size) { unsigned long lsrc = (unsigned long)src; int mem_type; @@ -55,7 +55,7 @@ long probe_kernel_read(void *dst, void *src, size_t size) return -EFAULT; } -long probe_kernel_write(void *dst, void *src, size_t size) +long probe_kernel_write(void *dst, const void *src, size_t size) { unsigned long ldst = (unsigned long)dst; int mem_type; diff --git a/arch/s390/mm/maccess.c b/arch/s390/mm/maccess.c index 71a4b0d34be0..51e5cd9b906a 100644 --- a/arch/s390/mm/maccess.c +++ b/arch/s390/mm/maccess.c @@ -19,7 +19,7 @@ * using the stura instruction. * Returns the number of bytes copied or -EFAULT. */ -static long probe_kernel_write_odd(void *dst, void *src, size_t size) +static long probe_kernel_write_odd(void *dst, const void *src, size_t size) { unsigned long count, aligned; int offset, mask; @@ -45,7 +45,7 @@ static long probe_kernel_write_odd(void *dst, void *src, size_t size) return rc ? rc : count; } -long probe_kernel_write(void *dst, void *src, size_t size) +long probe_kernel_write(void *dst, const void *src, size_t size) { long copied = 0; diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h index d512d98dfb7d..5ca0951e1855 100644 --- a/include/linux/uaccess.h +++ b/include/linux/uaccess.h @@ -93,8 +93,8 @@ static inline unsigned long __copy_from_user_nocache(void *to, * Safely read from address @src to the buffer at @dst. If a kernel fault * happens, handle that and return -EFAULT. */ -extern long probe_kernel_read(void *dst, void *src, size_t size); -extern long __probe_kernel_read(void *dst, void *src, size_t size); +extern long probe_kernel_read(void *dst, const void *src, size_t size); +extern long __probe_kernel_read(void *dst, const void *src, size_t size); /* * probe_kernel_write(): safely attempt to write to a location @@ -105,7 +105,7 @@ extern long __probe_kernel_read(void *dst, void *src, size_t size); * Safely write to address @dst from the buffer at @src. If a kernel fault * happens, handle that and return -EFAULT. */ -extern long notrace probe_kernel_write(void *dst, void *src, size_t size); -extern long notrace __probe_kernel_write(void *dst, void *src, size_t size); +extern long notrace probe_kernel_write(void *dst, const void *src, size_t size); +extern long notrace __probe_kernel_write(void *dst, const void *src, size_t size); #endif /* __LINUX_UACCESS_H__ */ diff --git a/mm/maccess.c b/mm/maccess.c index e2b6f5634e0d..4cee182ab5f3 100644 --- a/mm/maccess.c +++ b/mm/maccess.c @@ -15,10 +15,10 @@ * happens, handle that and return -EFAULT. */ -long __weak probe_kernel_read(void *dst, void *src, size_t size) +long __weak probe_kernel_read(void *dst, const void *src, size_t size) __attribute__((alias("__probe_kernel_read"))); -long __probe_kernel_read(void *dst, void *src, size_t size) +long __probe_kernel_read(void *dst, const void *src, size_t size) { long ret; mm_segment_t old_fs = get_fs(); @@ -43,10 +43,10 @@ EXPORT_SYMBOL_GPL(probe_kernel_read); * Safely write to address @dst from the buffer at @src. If a kernel fault * happens, handle that and return -EFAULT. */ -long __weak probe_kernel_write(void *dst, void *src, size_t size) +long __weak probe_kernel_write(void *dst, const void *src, size_t size) __attribute__((alias("__probe_kernel_write"))); -long __probe_kernel_write(void *dst, void *src, size_t size) +long __probe_kernel_write(void *dst, const void *src, size_t size) { long ret; mm_segment_t old_fs = get_fs(); -- cgit v1.2.3 From 0d098a7d1e39553e8a3f638b923551edec4868a7 Mon Sep 17 00:00:00 2001 From: Rakib Mullick Date: Thu, 12 May 2011 23:33:40 +0600 Subject: x86/ftrace: Fix compiler warning in ftrace.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Due to commit dc326fca2b64 (x86, cpu: Clean up and unify the NOP selection infrastructure), we get the following warning: arch/x86/kernel/ftrace.c: In function ‘ftrace_make_nop’: arch/x86/kernel/ftrace.c:308:6: warning: assignment discards qualifiers from pointer target type arch/x86/kernel/ftrace.c: In function ‘ftrace_make_call’: arch/x86/kernel/ftrace.c:318:6: warning: assignment discards qualifiers from pointer target type ftrace_nop_replace() now returns const unsigned char *, so change its associated function/variable to its compatible type to keep compiler clam. Signed-off-by: Rakib Mullick Link: http://lkml.kernel.org/r/1305221620.7986.4.camel@localhost.localdomain [ updated for change of const void *src in probe_kernel_write() ] Signed-off-by: Steven Rostedt --- arch/x86/kernel/ftrace.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 0ba15a6cc57e..c9a281f272fd 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -123,7 +123,7 @@ static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr) static atomic_t nmi_running = ATOMIC_INIT(0); static int mod_code_status; /* holds return value of text write */ static void *mod_code_ip; /* holds the IP to write to */ -static void *mod_code_newcode; /* holds the text to write to the IP */ +static const void *mod_code_newcode; /* holds the text to write to the IP */ static unsigned nmi_wait_count; static atomic_t nmi_update_count = ATOMIC_INIT(0); @@ -225,7 +225,7 @@ within(unsigned long addr, unsigned long start, unsigned long end) } static int -do_ftrace_mod_code(unsigned long ip, void *new_code) +do_ftrace_mod_code(unsigned long ip, const void *new_code) { /* * On x86_64, kernel text mappings are mapped read-only with @@ -266,8 +266,8 @@ static const unsigned char *ftrace_nop_replace(void) } static int -ftrace_modify_code(unsigned long ip, unsigned char *old_code, - unsigned char *new_code) +ftrace_modify_code(unsigned long ip, unsigned const char *old_code, + unsigned const char *new_code) { unsigned char replaced[MCOUNT_INSN_SIZE]; @@ -301,7 +301,7 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code, int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr) { - unsigned char *new, *old; + unsigned const char *new, *old; unsigned long ip = rec->ip; old = ftrace_call_replace(ip, addr); @@ -312,7 +312,7 @@ int ftrace_make_nop(struct module *mod, int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) { - unsigned char *new, *old; + unsigned const char *new, *old; unsigned long ip = rec->ip; old = ftrace_nop_replace(); -- cgit v1.2.3 From 50d6828e898590fc5d038810334695380baa1c78 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 19 May 2011 14:41:17 -0400 Subject: scripts/tags.sh: Fix ctags for DEFINE_EVENT() The regex to handle DEFINE_EVENT() should not be the same as the TRACE_EVENT() as the first parameter in DEFINE_EVENT is the template name, not the event name. We need the second parameter as that is what the trace_... will use. Tested-by: Peter Zijlstra Signed-off-by: Steven Rostedt --- scripts/tags.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/tags.sh b/scripts/tags.sh index bd6185d529cf..33b53cab5dbf 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -132,7 +132,7 @@ exuberant() --regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \ --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/' \ --regex-c++='/^TRACE_EVENT\(([^,)]*).*/trace_\1/' \ - --regex-c++='/^DEFINE_EVENT\(([^,)]*).*/trace_\1/' + --regex-c++='/^DEFINE_EVENT\([^,)]*, *([^,)]*).*/trace_\1/' all_kconfigs | xargs $1 -a \ --langdef=kconfig --language-force=kconfig \ -- cgit v1.2.3 From 4d7a2fa876d1a615649761dc465708d0a062249a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 19 May 2011 14:43:57 -0400 Subject: scripts/tags.sh: Add magic for trace-events for etags too Seems that Peter Zijlstra treats us emacs users as second class citizens and the commit: commit 15664125f7cadcb6d725cb2d9b90f9715397848d Author: Peter Zijlstra scripts/tags.sh: Add magic for trace-events only updated ctags (for vim) and did not do the work to let us lowly emacs users benefit from such a change. Cc: Peter Zijlstra Signed-off-by: Steven Rostedt --- scripts/tags.sh | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/scripts/tags.sh b/scripts/tags.sh index 33b53cab5dbf..75c5d24f1993 100755 --- a/scripts/tags.sh +++ b/scripts/tags.sh @@ -152,7 +152,9 @@ emacs() { all_sources | xargs $1 -a \ --regex='/^ENTRY(\([^)]*\)).*/\1/' \ - --regex='/^SYSCALL_DEFINE[0-9]?(\([^,)]*\).*/sys_\1/' + --regex='/^SYSCALL_DEFINE[0-9]?(\([^,)]*\).*/sys_\1/' \ + --regex='/^TRACE_EVENT(\([^,)]*\).*/trace_\1/' \ + --regex='/^DEFINE_EVENT([^,)]*, *\([^,)]*\).*/trace_\1/' all_kconfigs | xargs $1 -a \ --regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/' -- cgit v1.2.3 From 9905ce8ad7b79dddd23c7b4753d0b2cdb65bde3c Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Wed, 11 May 2011 22:53:51 +0530 Subject: ftrace/recordmcount: Avoid STT_FUNC symbols as base on ARM While find_secsym_ndx often finds the unamed local STT_SECTION, if a section has only one function in it, the ARM toolchain generates the STT_FUNC symbol before the STT_SECTION, and recordmcount finds this instead. This is problematic on ARM because in ARM ELFs, "if a [STT_FUNC] symbol addresses a Thumb instruction, its value is the address of the instruction with bit zero set (in a relocatable object, the section offset with bit zero set)". This leads to incorrect mcount addresses being recorded. Fix this by not using STT_FUNC symbols as the base on ARM. Signed-off-by: Rabin Vincent Link: http://lkml.kernel.org/r/1305134631-31617-1-git-send-email-rabin@rab.in Signed-off-by: Steven Rostedt --- scripts/recordmcount.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/scripts/recordmcount.h b/scripts/recordmcount.h index 4be60364a405..f40a6af6bf40 100644 --- a/scripts/recordmcount.h +++ b/scripts/recordmcount.h @@ -43,6 +43,7 @@ #undef ELF_R_INFO #undef Elf_r_info #undef ELF_ST_BIND +#undef ELF_ST_TYPE #undef fn_ELF_R_SYM #undef fn_ELF_R_INFO #undef uint_t @@ -76,6 +77,7 @@ # define ELF_R_INFO ELF64_R_INFO # define Elf_r_info Elf64_r_info # define ELF_ST_BIND ELF64_ST_BIND +# define ELF_ST_TYPE ELF64_ST_TYPE # define fn_ELF_R_SYM fn_ELF64_R_SYM # define fn_ELF_R_INFO fn_ELF64_R_INFO # define uint_t uint64_t @@ -108,6 +110,7 @@ # define ELF_R_INFO ELF32_R_INFO # define Elf_r_info Elf32_r_info # define ELF_ST_BIND ELF32_ST_BIND +# define ELF_ST_TYPE ELF32_ST_TYPE # define fn_ELF_R_SYM fn_ELF32_R_SYM # define fn_ELF_R_INFO fn_ELF32_R_INFO # define uint_t uint32_t @@ -427,6 +430,11 @@ static unsigned find_secsym_ndx(unsigned const txtndx, if (txtndx == w2(symp->st_shndx) /* avoid STB_WEAK */ && (STB_LOCAL == st_bind || STB_GLOBAL == st_bind)) { + /* function symbols on ARM have quirks, avoid them */ + if (w2(ehdr->e_machine) == EM_ARM + && ELF_ST_TYPE(symp->st_info) == STT_FUNC) + continue; + *recvalp = _w(symp->st_value); return symp - sym0; } -- cgit v1.2.3 From 7cbc5b8d4a775a43875a09e29c49a2a8195b5b2d Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Tue, 10 May 2011 12:43:46 +0200 Subject: jump_label: Check entries limit in __jump_label_update When iterating the jump_label entries array (core or modules), the __jump_label_update function peeks over the last entry. The reason is that the end of the for loop depends on the key value of the processed entry. Thus when going through the last array entry, we will touch the memory behind the array limit. This bug probably will never be triggered, since most likely the memory behind the jump_label entries will be accesable and the entry->key will be different than the expected value. Signed-off-by: Jiri Olsa Acked-by: Jason Baron Link: http://lkml.kernel.org/r/20110510104346.GC1899@jolsa.brq.redhat.com Signed-off-by: Steven Rostedt --- kernel/jump_label.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/kernel/jump_label.c b/kernel/jump_label.c index 74d1c099fbd1..fa27e750dbc0 100644 --- a/kernel/jump_label.c +++ b/kernel/jump_label.c @@ -105,9 +105,12 @@ static int __jump_label_text_reserved(struct jump_entry *iter_start, } static void __jump_label_update(struct jump_label_key *key, - struct jump_entry *entry, int enable) + struct jump_entry *entry, + struct jump_entry *stop, int enable) { - for (; entry->key == (jump_label_t)(unsigned long)key; entry++) { + for (; (entry < stop) && + (entry->key == (jump_label_t)(unsigned long)key); + entry++) { /* * entry->code set to 0 invalidates module init text sections * kernel_text_address() verifies we are not in core kernel @@ -181,7 +184,11 @@ static void __jump_label_mod_update(struct jump_label_key *key, int enable) struct jump_label_mod *mod = key->next; while (mod) { - __jump_label_update(key, mod->entries, enable); + struct module *m = mod->mod; + + __jump_label_update(key, mod->entries, + m->jump_entries + m->num_jump_entries, + enable); mod = mod->next; } } @@ -245,7 +252,8 @@ static int jump_label_add_module(struct module *mod) key->next = jlm; if (jump_label_enabled(key)) - __jump_label_update(key, iter, JUMP_LABEL_ENABLE); + __jump_label_update(key, iter, iter_stop, + JUMP_LABEL_ENABLE); } return 0; @@ -371,7 +379,7 @@ static void jump_label_update(struct jump_label_key *key, int enable) /* if there are no users, entry can be NULL */ if (entry) - __jump_label_update(key, entry, enable); + __jump_label_update(key, entry, __stop___jump_table, enable); #ifdef CONFIG_MODULES __jump_label_mod_update(key, enable); -- cgit v1.2.3 From 916f676f8dc016103f983c7ec54c18ecdbb6e349 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Wed, 25 May 2011 09:53:13 -0400 Subject: x86, efi: Retain boot service code until after switching to virtual mode UEFI stands for "Unified Extensible Firmware Interface", where "Firmware" is an ancient African word meaning "Why do something right when you can do it so wrong that children will weep and brave adults will cower before you", and "UEI" is Celtic for "We missed DOS so we burned it into your ROMs". The UEFI specification provides for runtime services (ie, another way for the operating system to be forced to depend on the firmware) and we rely on these for certain trivial tasks such as setting up the bootloader. But some hardware fails to work if we attempt to use these runtime services from physical mode, and so we have to switch into virtual mode. So far so dreadful. The specification makes it clear that the operating system is free to do whatever it wants with boot services code after ExitBootServices() has been called. SetVirtualAddressMap() can't be called until ExitBootServices() has been. So, obviously, a whole bunch of EFI implementations call into boot services code when we do that. Since we've been charmingly naive and trusted that the specification may be somehow relevant to the real world, we've already stuffed a picture of a penguin or something in that address space. And just to make things more entertaining, we've also marked it non-executable. This patch allocates the boot services regions during EFI init and makes sure that they're executable. Then, after SetVirtualAddressMap(), it discards them and everyone lives happily ever after. Except for the ones who have to work on EFI, who live sad lives haunted by the knowledge that someone's eventually going to write yet another firmware specification. [ hpa: adding this to urgent with a stable tag since it fixes currently-broken hardware. However, I do not know what the dependencies are and so I do not know which -stable versions this may be a candidate for. ] Signed-off-by: Matthew Garrett Link: http://lkml.kernel.org/r/1306331593-28715-1-git-send-email-mjg@redhat.com Signed-off-by: H. Peter Anvin Cc: Tony Luck Cc: --- arch/x86/kernel/setup.c | 7 +++++++ arch/x86/platform/efi/efi.c | 45 +++++++++++++++++++++++++++++++++++++++++- arch/x86/platform/efi/efi_64.c | 5 +++-- include/linux/efi.h | 1 + 4 files changed, 55 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 605e5ae19c7f..b9ca498f5602 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -910,6 +910,13 @@ void __init setup_arch(char **cmdline_p) memblock.current_limit = get_max_mapped(); memblock_x86_fill(); + /* + * The EFI specification says that boot service code won't be called + * after ExitBootServices(). This is, in fact, a lie. + */ + if (efi_enabled) + efi_reserve_boot_services(); + /* preallocate 4k for mptable mpc */ early_reserve_e820_mpc_new(); diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index b30aa26a8df2..0d3a4fa34560 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -304,6 +304,40 @@ static void __init print_efi_memmap(void) } #endif /* EFI_DEBUG */ +void __init efi_reserve_boot_services(void) +{ + void *p; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + efi_memory_desc_t *md = p; + unsigned long long start = md->phys_addr; + unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; + + if (md->type != EFI_BOOT_SERVICES_CODE && + md->type != EFI_BOOT_SERVICES_DATA) + continue; + + memblock_x86_reserve_range(start, start + size, "EFI Boot"); + } +} + +static void __init efi_free_boot_services(void) +{ + void *p; + + for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { + efi_memory_desc_t *md = p; + unsigned long long start = md->phys_addr; + unsigned long long size = md->num_pages << EFI_PAGE_SHIFT; + + if (md->type != EFI_BOOT_SERVICES_CODE && + md->type != EFI_BOOT_SERVICES_DATA) + continue; + + free_bootmem_late(start, size); + } +} + void __init efi_init(void) { efi_config_table_t *config_tables; @@ -536,7 +570,9 @@ void __init efi_enter_virtual_mode(void) for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { md = p; - if (!(md->attribute & EFI_MEMORY_RUNTIME)) + if (!(md->attribute & EFI_MEMORY_RUNTIME) && + md->type != EFI_BOOT_SERVICES_CODE && + md->type != EFI_BOOT_SERVICES_DATA) continue; size = md->num_pages << EFI_PAGE_SHIFT; @@ -592,6 +628,13 @@ void __init efi_enter_virtual_mode(void) panic("EFI call to SetVirtualAddressMap() failed!"); } + /* + * Thankfully, it does seem that no runtime services other than + * SetVirtualAddressMap() will touch boot services code, so we can + * get rid of it all at this point + */ + efi_free_boot_services(); + /* * Now that EFI is in virtual mode, update the function * pointers in the runtime service table to the new virtual addresses. diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index 2649426a7905..ac3aa54e2654 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -49,10 +49,11 @@ static void __init early_code_mapping_set_exec(int executable) if (!(__supported_pte_mask & _PAGE_NX)) return; - /* Make EFI runtime service code area executable */ + /* Make EFI service code area executable */ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size) { md = p; - if (md->type == EFI_RUNTIME_SERVICES_CODE) + if (md->type == EFI_RUNTIME_SERVICES_CODE || + md->type == EFI_BOOT_SERVICES_CODE) efi_set_executable(md, executable); } } diff --git a/include/linux/efi.h b/include/linux/efi.h index 33fa1203024e..e376270cd26e 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -299,6 +299,7 @@ extern void efi_initialize_iomem_resources(struct resource *code_resource, struct resource *data_resource, struct resource *bss_resource); extern unsigned long efi_get_time(void); extern int efi_set_rtc_mmss(unsigned long nowtime); +extern void efi_reserve_boot_services(void); extern struct efi_memory_map memmap; /** -- cgit v1.2.3 From ed82b9c26e26e1212b13930ab72efcbea7ee784c Mon Sep 17 00:00:00 2001 From: Hans Petter Selasky Date: Mon, 23 May 2011 07:59:37 -0300 Subject: [media] cpia2: fix warning about invalid trigraph sequence Signed-off-by: Hans Petter Selasky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cpia2/cpia2_v4l.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index 0073a8c55336..40eb6326e48a 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -438,7 +438,7 @@ static int cpia2_querycap(struct file *file, void *fh, struct v4l2_capability *v strcat(vc->card, " (676/"); break; default: - strcat(vc->card, " (???/"); + strcat(vc->card, " (XXX/"); break; } switch (cam->params.version.sensor_flags) { @@ -458,7 +458,7 @@ static int cpia2_querycap(struct file *file, void *fh, struct v4l2_capability *v strcat(vc->card, "500)"); break; default: - strcat(vc->card, "???)"); + strcat(vc->card, "XXX)"); break; } -- cgit v1.2.3 From 2edcdfae98f2234336d5646befa6247ae03d12e8 Mon Sep 17 00:00:00 2001 From: Hans Petter Selasky Date: Mon, 23 May 2011 08:28:50 -0300 Subject: [media] Remove invalid parameter description Signed-off-by: Hans Petter Selasky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/tda8261.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/media/dvb/frontends/tda8261.c b/drivers/media/dvb/frontends/tda8261.c index 1742056a34e8..53c7d8f1df28 100644 --- a/drivers/media/dvb/frontends/tda8261.c +++ b/drivers/media/dvb/frontends/tda8261.c @@ -224,7 +224,6 @@ exit: } EXPORT_SYMBOL(tda8261_attach); -MODULE_PARM_DESC(verbose, "Set verbosity level"); MODULE_AUTHOR("Manu Abraham"); MODULE_DESCRIPTION("TDA8261 8PSK/QPSK Tuner"); -- cgit v1.2.3 From 96c68795dc28aa3b1ade2194779c7d45320699cf Mon Sep 17 00:00:00 2001 From: Hans Petter Selasky Date: Mon, 23 May 2011 11:06:22 -0300 Subject: [media] Inlined functions should be static Signed-off-by: Hans Petter Selasky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/stb0899_algo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/stb0899_algo.c b/drivers/media/dvb/frontends/stb0899_algo.c index 2da55ec20392..d70eee00f33a 100644 --- a/drivers/media/dvb/frontends/stb0899_algo.c +++ b/drivers/media/dvb/frontends/stb0899_algo.c @@ -23,7 +23,7 @@ #include "stb0899_priv.h" #include "stb0899_reg.h" -inline u32 stb0899_do_div(u64 n, u32 d) +static inline u32 stb0899_do_div(u64 n, u32 d) { /* wrap do_div() for ease of use */ -- cgit v1.2.3 From 5d8f290c051b55dfff6bd7e688a05945246a0861 Mon Sep 17 00:00:00 2001 From: Hans Petter Selasky Date: Mon, 23 May 2011 12:10:40 -0300 Subject: [media] Add missing include guard to header file Signed-off-by: Hans Petter Selasky Signed-off-by: Mauro Carvalho Chehab --- include/media/videobuf-dvb.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/media/videobuf-dvb.h b/include/media/videobuf-dvb.h index 07cf4b9d0a65..bf365721d6b0 100644 --- a/include/media/videobuf-dvb.h +++ b/include/media/videobuf-dvb.h @@ -4,6 +4,9 @@ #include #include +#ifndef _VIDEOBUF_DVB_H_ +#define _VIDEOBUF_DVB_H_ + struct videobuf_dvb { /* filling that the job of the driver */ char *name; @@ -54,6 +57,7 @@ void videobuf_dvb_dealloc_frontends(struct videobuf_dvb_frontends *f); struct videobuf_dvb_frontend * videobuf_dvb_get_frontend(struct videobuf_dvb_frontends *f, int id); int videobuf_dvb_find_frontend(struct videobuf_dvb_frontends *f, struct dvb_frontend *p); +#endif /* _VIDEOBUF_DVB_H_ */ /* * Local variables: -- cgit v1.2.3 From 616a4b83bd1b4ec2260a91480e211290c35348bb Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Wed, 25 May 2011 18:28:29 -0300 Subject: [media] v1.88 DM04/QQBOX Move remote to use rc_core dvb-usb-remote driver to use dvb-usb-remote. The remote(s) generates 24 bit NEC codes, lme2510 keymaps redefined. Other minor fixes fix le warning. make sure frontend is detached on firmware change. Signed-off-by: Malcolm Priestley Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/lmedm04.c | 107 +++++++++++---------------- drivers/media/rc/keymaps/rc-lme2510.c | 134 +++++++++++++++++----------------- 2 files changed, 110 insertions(+), 131 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c index f36f471deae2..37b146961ae2 100644 --- a/drivers/media/dvb/dvb-usb/lmedm04.c +++ b/drivers/media/dvb/dvb-usb/lmedm04.c @@ -207,17 +207,6 @@ static int lme2510_stream_restart(struct dvb_usb_device *d) rbuff, sizeof(rbuff)); return ret; } -static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u32 keypress) -{ - struct dvb_usb_device *d = adap->dev; - - deb_info(1, "INT Key Keypress =%04x", keypress); - - if (keypress > 0) - rc_keydown(d->rc_dev, keypress, 0); - - return 0; -} static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out) { @@ -256,6 +245,7 @@ static void lme2510_int_response(struct urb *lme_urb) struct lme2510_state *st = adap->dev->priv; static u8 *ibuf, *rbuf; int i = 0, offset; + u32 key; switch (lme_urb->status) { case 0: @@ -282,10 +272,16 @@ static void lme2510_int_response(struct urb *lme_urb) switch (ibuf[0]) { case 0xaa: - debug_data_snipet(1, "INT Remote data snipet in", ibuf); - lme2510_remote_keypress(adap, - (u32)(ibuf[2] << 24) + (ibuf[3] << 16) + - (ibuf[4] << 8) + ibuf[5]); + debug_data_snipet(1, "INT Remote data snipet", ibuf); + if ((ibuf[4] + ibuf[5]) == 0xff) { + key = ibuf[5]; + key += (ibuf[3] > 0) + ? (ibuf[3] ^ 0xff) << 8 : 0; + key += (ibuf[2] ^ 0xff) << 16; + deb_info(1, "INT Key =%08x", key); + if (adap->dev->rc_dev != NULL) + rc_keydown(adap->dev->rc_dev, key, 0); + } break; case 0xbb: switch (st->tuner_config) { @@ -691,45 +687,6 @@ static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) return (ret < 0) ? -ENODEV : 0; } -static int lme2510_int_service(struct dvb_usb_adapter *adap) -{ - struct dvb_usb_device *d = adap->dev; - struct rc_dev *rc; - int ret; - - info("STA Configuring Remote"); - - rc = rc_allocate_device(); - if (!rc) - return -ENOMEM; - - usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys)); - strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys)); - - rc->input_name = "LME2510 Remote Control"; - rc->input_phys = d->rc_phys; - rc->map_name = RC_MAP_LME2510; - rc->driver_name = "LME 2510"; - usb_to_input_id(d->udev, &rc->input_id); - - ret = rc_register_device(rc); - if (ret) { - rc_free_device(rc); - return ret; - } - d->rc_dev = rc; - - /* Start the Interrupt */ - ret = lme2510_int_read(adap); - if (ret < 0) { - rc_unregister_device(rc); - info("INT Unable to start Interrupt Service"); - return -ENODEV; - } - - return 0; -} - static u8 check_sum(u8 *p, u8 len) { u8 sum = 0; @@ -831,7 +788,7 @@ static int lme_firmware_switch(struct usb_device *udev, int cold) cold_fw = !cold; - if (udev->descriptor.idProduct == 0x1122) { + if (le16_to_cpu(udev->descriptor.idProduct) == 0x1122) { switch (dvb_usb_lme2510_firmware) { default: dvb_usb_lme2510_firmware = TUNER_S0194; @@ -1053,8 +1010,11 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap) end: if (ret) { - kfree(adap->fe); - adap->fe = NULL; + if (adap->fe) { + dvb_frontend_detach(adap->fe); + adap->fe = NULL; + } + adap->dev->props.rc.core.rc_codes = NULL; return -ENODEV; } @@ -1097,8 +1057,12 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap) return -ENODEV; } - /* Start the Interrupt & Remote*/ - ret = lme2510_int_service(adap); + /* Start the Interrupt*/ + ret = lme2510_int_read(adap); + if (ret < 0) { + info("INT Unable to start Interrupt Service"); + return -ENODEV; + } return ret; } @@ -1204,6 +1168,12 @@ static struct dvb_usb_device_properties lme2510_properties = { } } }, + .rc.core = { + .protocol = RC_TYPE_NEC, + .module_name = "LME2510 Remote Control", + .allowed_protos = RC_TYPE_NEC, + .rc_codes = RC_MAP_LME2510, + }, .power_ctrl = lme2510_powerup, .identify_state = lme2510_identify_state, .i2c_algo = &lme2510_i2c_algo, @@ -1246,6 +1216,12 @@ static struct dvb_usb_device_properties lme2510c_properties = { } } }, + .rc.core = { + .protocol = RC_TYPE_NEC, + .module_name = "LME2510 Remote Control", + .allowed_protos = RC_TYPE_NEC, + .rc_codes = RC_MAP_LME2510, + }, .power_ctrl = lme2510_powerup, .identify_state = lme2510_identify_state, .i2c_algo = &lme2510_i2c_algo, @@ -1269,19 +1245,21 @@ static void *lme2510_exit_int(struct dvb_usb_device *d) adap->feedcount = 0; } - if (st->lme_urb != NULL) { + if (st->usb_buffer != NULL) { st->i2c_talk_onoff = 1; st->signal_lock = 0; st->signal_level = 0; st->signal_sn = 0; buffer = st->usb_buffer; + } + + if (st->lme_urb != NULL) { usb_kill_urb(st->lme_urb); usb_free_coherent(d->udev, 5000, st->buffer, st->lme_urb->transfer_dma); info("Interrupt Service Stopped"); - rc_unregister_device(d->rc_dev); - info("Remote Stopped"); } + return buffer; } @@ -1293,7 +1271,8 @@ static void lme2510_exit(struct usb_interface *intf) if (d != NULL) { usb_buffer = lme2510_exit_int(d); dvb_usb_device_exit(intf); - kfree(usb_buffer); + if (usb_buffer != NULL) + kfree(usb_buffer); } } @@ -1327,5 +1306,5 @@ module_exit(lme2510_module_exit); MODULE_AUTHOR("Malcolm Priestley "); MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0"); -MODULE_VERSION("1.86"); +MODULE_VERSION("1.88"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c index afae14fd152e..129d3f9a461d 100644 --- a/drivers/media/rc/keymaps/rc-lme2510.c +++ b/drivers/media/rc/keymaps/rc-lme2510.c @@ -14,81 +14,81 @@ static struct rc_map_table lme2510_rc[] = { /* Type 1 - 26 buttons */ - { 0xef12ba45, KEY_0 }, - { 0xef12a05f, KEY_1 }, - { 0xef12af50, KEY_2 }, - { 0xef12a25d, KEY_3 }, - { 0xef12be41, KEY_4 }, - { 0xef12f50a, KEY_5 }, - { 0xef12bd42, KEY_6 }, - { 0xef12b847, KEY_7 }, - { 0xef12b649, KEY_8 }, - { 0xef12fa05, KEY_9 }, - { 0xef12bc43, KEY_POWER }, - { 0xef12b946, KEY_SUBTITLE }, - { 0xef12f906, KEY_PAUSE }, - { 0xef12fc03, KEY_MEDIA_REPEAT}, - { 0xef12fd02, KEY_PAUSE }, - { 0xef12a15e, KEY_VOLUMEUP }, - { 0xef12a35c, KEY_VOLUMEDOWN }, - { 0xef12f609, KEY_CHANNELUP }, - { 0xef12e51a, KEY_CHANNELDOWN }, - { 0xef12e11e, KEY_PLAY }, - { 0xef12e41b, KEY_ZOOM }, - { 0xef12a659, KEY_MUTE }, - { 0xef12a55a, KEY_TV }, - { 0xef12e718, KEY_RECORD }, - { 0xef12f807, KEY_EPG }, - { 0xef12fe01, KEY_STOP }, + { 0x10ed45, KEY_0 }, + { 0x10ed5f, KEY_1 }, + { 0x10ed50, KEY_2 }, + { 0x10ed5d, KEY_3 }, + { 0x10ed41, KEY_4 }, + { 0x10ed0a, KEY_5 }, + { 0x10ed42, KEY_6 }, + { 0x10ed47, KEY_7 }, + { 0x10ed49, KEY_8 }, + { 0x10ed05, KEY_9 }, + { 0x10ed43, KEY_POWER }, + { 0x10ed46, KEY_SUBTITLE }, + { 0x10ed06, KEY_PAUSE }, + { 0x10ed03, KEY_MEDIA_REPEAT}, + { 0x10ed02, KEY_PAUSE }, + { 0x10ed5e, KEY_VOLUMEUP }, + { 0x10ed5c, KEY_VOLUMEDOWN }, + { 0x10ed09, KEY_CHANNELUP }, + { 0x10ed1a, KEY_CHANNELDOWN }, + { 0x10ed1e, KEY_PLAY }, + { 0x10ed1b, KEY_ZOOM }, + { 0x10ed59, KEY_MUTE }, + { 0x10ed5a, KEY_TV }, + { 0x10ed18, KEY_RECORD }, + { 0x10ed07, KEY_EPG }, + { 0x10ed01, KEY_STOP }, /* Type 2 - 20 buttons */ - { 0xff40ea15, KEY_0 }, - { 0xff40f708, KEY_1 }, - { 0xff40f609, KEY_2 }, - { 0xff40f50a, KEY_3 }, - { 0xff40f30c, KEY_4 }, - { 0xff40f20d, KEY_5 }, - { 0xff40f10e, KEY_6 }, - { 0xff40ef10, KEY_7 }, - { 0xff40ee11, KEY_8 }, - { 0xff40ed12, KEY_9 }, - { 0xff40ff00, KEY_POWER }, - { 0xff40fb04, KEY_MEDIA_REPEAT}, /* Recall */ - { 0xff40e51a, KEY_PAUSE }, /* Timeshift */ - { 0xff40fd02, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */ - { 0xff40f906, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/ - { 0xff40fe01, KEY_CHANNELUP }, - { 0xff40fa05, KEY_CHANNELDOWN }, - { 0xff40eb14, KEY_ZOOM }, - { 0xff40e718, KEY_RECORD }, - { 0xff40e916, KEY_STOP }, + { 0xbf15, KEY_0 }, + { 0xbf08, KEY_1 }, + { 0xbf09, KEY_2 }, + { 0xbf0a, KEY_3 }, + { 0xbf0c, KEY_4 }, + { 0xbf0d, KEY_5 }, + { 0xbf0e, KEY_6 }, + { 0xbf10, KEY_7 }, + { 0xbf11, KEY_8 }, + { 0xbf12, KEY_9 }, + { 0xbf00, KEY_POWER }, + { 0xbf04, KEY_MEDIA_REPEAT}, /* Recall */ + { 0xbf1a, KEY_PAUSE }, /* Timeshift */ + { 0xbf02, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */ + { 0xbf06, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/ + { 0xbf01, KEY_CHANNELUP }, + { 0xbf05, KEY_CHANNELDOWN }, + { 0xbf14, KEY_ZOOM }, + { 0xbf18, KEY_RECORD }, + { 0xbf16, KEY_STOP }, /* Type 3 - 20 buttons */ - { 0xff00e31c, KEY_0 }, - { 0xff00f807, KEY_1 }, - { 0xff00ea15, KEY_2 }, - { 0xff00f609, KEY_3 }, - { 0xff00e916, KEY_4 }, - { 0xff00e619, KEY_5 }, - { 0xff00f20d, KEY_6 }, - { 0xff00f30c, KEY_7 }, - { 0xff00e718, KEY_8 }, - { 0xff00a15e, KEY_9 }, - { 0xff00ba45, KEY_POWER }, - { 0xff00bb44, KEY_MEDIA_REPEAT}, /* Recall */ - { 0xff00b54a, KEY_PAUSE }, /* Timeshift */ - { 0xff00b847, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */ - { 0xff00bc43, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/ - { 0xff00b946, KEY_CHANNELUP }, - { 0xff00bf40, KEY_CHANNELDOWN }, - { 0xff00f708, KEY_ZOOM }, - { 0xff00bd42, KEY_RECORD }, - { 0xff00a55a, KEY_STOP }, + { 0x1c, KEY_0 }, + { 0x07, KEY_1 }, + { 0x15, KEY_2 }, + { 0x09, KEY_3 }, + { 0x16, KEY_4 }, + { 0x19, KEY_5 }, + { 0x0d, KEY_6 }, + { 0x0c, KEY_7 }, + { 0x18, KEY_8 }, + { 0x5e, KEY_9 }, + { 0x45, KEY_POWER }, + { 0x44, KEY_MEDIA_REPEAT}, /* Recall */ + { 0x4a, KEY_PAUSE }, /* Timeshift */ + { 0x47, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */ + { 0x43, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/ + { 0x46, KEY_CHANNELUP }, + { 0x40, KEY_CHANNELDOWN }, + { 0x08, KEY_ZOOM }, + { 0x42, KEY_RECORD }, + { 0x5a, KEY_STOP }, }; static struct rc_map_list lme2510_map = { .map = { .scan = lme2510_rc, .size = ARRAY_SIZE(lme2510_rc), - .rc_type = RC_TYPE_UNKNOWN, + .rc_type = RC_TYPE_NEC, .name = RC_MAP_LME2510, } }; -- cgit v1.2.3 From a1cd6173596c6f7d1f0b41ac7d33ecf03c581edc Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 23 May 2011 15:24:25 -0400 Subject: ftrace: Have ftrace_startup() return failure code The register_ftrace_function() returns an error code on failure except if the call to ftrace_startup() fails. Add a error return to ftrace_startup() if it fails to start, allowing register_ftrace_funtion() to return a proper error value. Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index d017c2c82c44..bebbc959ee8c 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -1638,12 +1638,12 @@ static void ftrace_startup_enable(int command) ftrace_run_update_code(command); } -static void ftrace_startup(struct ftrace_ops *ops, int command) +static int ftrace_startup(struct ftrace_ops *ops, int command) { bool hash_enable = true; if (unlikely(ftrace_disabled)) - return; + return -ENODEV; ftrace_start_up++; command |= FTRACE_ENABLE_CALLS; @@ -1662,6 +1662,8 @@ static void ftrace_startup(struct ftrace_ops *ops, int command) ftrace_hash_rec_enable(ops, 1); ftrace_startup_enable(command); + + return 0; } static void ftrace_shutdown(struct ftrace_ops *ops, int command) @@ -2501,7 +2503,7 @@ static void __enable_ftrace_function_probe(void) ret = __register_ftrace_function(&trace_probe_ops); if (!ret) - ftrace_startup(&trace_probe_ops, 0); + ret = ftrace_startup(&trace_probe_ops, 0); ftrace_probe_registered = 1; } @@ -3466,7 +3468,7 @@ device_initcall(ftrace_nodyn_init); static inline int ftrace_init_dyn_debugfs(struct dentry *d_tracer) { return 0; } static inline void ftrace_startup_enable(int command) { } /* Keep as macros so we do not need to define the commands */ -# define ftrace_startup(ops, command) do { } while (0) +# define ftrace_startup(ops, command) ({0;}) # define ftrace_shutdown(ops, command) do { } while (0) # define ftrace_startup_sysctl() do { } while (0) # define ftrace_shutdown_sysctl() do { } while (0) @@ -3799,7 +3801,7 @@ int register_ftrace_function(struct ftrace_ops *ops) ret = __register_ftrace_function(ops); if (!ret) - ftrace_startup(ops, 0); + ret = ftrace_startup(ops, 0); out_unlock: @@ -4045,7 +4047,7 @@ int register_ftrace_graph(trace_func_graph_ret_t retfunc, ftrace_graph_return = retfunc; ftrace_graph_entry = entryfunc; - ftrace_startup(&global_ops, FTRACE_START_FUNC_RET); + ret = ftrace_startup(&global_ops, FTRACE_START_FUNC_RET); out: mutex_unlock(&ftrace_lock); -- cgit v1.2.3 From 17bb615ad4f8d2d2c0f02794d27d7f83e0009ef4 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 23 May 2011 15:27:46 -0400 Subject: tracing: Have event with function tracer check error return The self tests for event tracer does not check if the function tracing was successfully activated. It needs to before it continues the tests, otherwise the wrong errors may be reported. Signed-off-by: Steven Rostedt --- kernel/trace/trace_events.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 2fe110341359..686ec399f2a8 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -1657,7 +1657,12 @@ static struct ftrace_ops trace_ops __initdata = static __init void event_trace_self_test_with_function(void) { - register_ftrace_function(&trace_ops); + int ret; + ret = register_ftrace_function(&trace_ops); + if (WARN_ON(ret < 0)) { + pr_info("Failed to enable function tracer for event tests\n"); + return; + } pr_info("Running tests again, along with the function tracer\n"); event_trace_self_tests(); unregister_ftrace_function(&trace_ops); -- cgit v1.2.3 From 3b6cfdb1714a33ae4d2ca9fbc818a42cf7adee69 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 23 May 2011 15:33:49 -0400 Subject: ftrace: Set ops->flag to enabled even on static function tracing When dynamic ftrace is not configured, the ops->flags still needs to have its FTRACE_OPS_FL_ENABLED bit set in ftrace_startup(). Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index bebbc959ee8c..25949b33057c 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -3468,7 +3468,11 @@ device_initcall(ftrace_nodyn_init); static inline int ftrace_init_dyn_debugfs(struct dentry *d_tracer) { return 0; } static inline void ftrace_startup_enable(int command) { } /* Keep as macros so we do not need to define the commands */ -# define ftrace_startup(ops, command) ({0;}) +# define ftrace_startup(ops, command) \ + ({ \ + (ops)->flags |= FTRACE_OPS_FL_ENABLED; \ + 0; \ + }) # define ftrace_shutdown(ops, command) do { } while (0) # define ftrace_startup_sysctl() do { } while (0) # define ftrace_shutdown_sysctl() do { } while (0) -- cgit v1.2.3 From 2fc1b6f0d0a719e1e2a30bf076a3a799feaf6af2 Mon Sep 17 00:00:00 2001 From: liubo Date: Tue, 19 Apr 2011 09:35:28 +0800 Subject: tracing: Add __print_symbolic_u64 to avoid warnings on 32bit machine Filesystem, like Btrfs, has some "ULL" macros, and when these macros are passed to tracepoints'__print_symbolic(), there will be 64->32 truncate WARNINGS during compiling on 32bit box. Signed-off-by: Liu Bo Link: http://lkml.kernel.org/r/4DACE6E0.7000507@cn.fujitsu.com Signed-off-by: Steven Rostedt --- include/linux/ftrace_event.h | 12 ++++++++++++ include/trace/ftrace.h | 13 +++++++++++++ kernel/trace/trace_output.c | 27 +++++++++++++++++++++++++++ 3 files changed, 52 insertions(+) diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h index b5a550a39a70..59d3ef100eb9 100644 --- a/include/linux/ftrace_event.h +++ b/include/linux/ftrace_event.h @@ -16,6 +16,11 @@ struct trace_print_flags { const char *name; }; +struct trace_print_flags_u64 { + unsigned long long mask; + const char *name; +}; + const char *ftrace_print_flags_seq(struct trace_seq *p, const char *delim, unsigned long flags, const struct trace_print_flags *flag_array); @@ -23,6 +28,13 @@ const char *ftrace_print_flags_seq(struct trace_seq *p, const char *delim, const char *ftrace_print_symbols_seq(struct trace_seq *p, unsigned long val, const struct trace_print_flags *symbol_array); +#if BITS_PER_LONG == 32 +const char *ftrace_print_symbols_seq_u64(struct trace_seq *p, + unsigned long long val, + const struct trace_print_flags_u64 + *symbol_array); +#endif + const char *ftrace_print_hex_seq(struct trace_seq *p, const unsigned char *buf, int len); diff --git a/include/trace/ftrace.h b/include/trace/ftrace.h index 3e68366d485a..533c49f48047 100644 --- a/include/trace/ftrace.h +++ b/include/trace/ftrace.h @@ -205,6 +205,19 @@ ftrace_print_symbols_seq(p, value, symbols); \ }) +#undef __print_symbolic_u64 +#if BITS_PER_LONG == 32 +#define __print_symbolic_u64(value, symbol_array...) \ + ({ \ + static const struct trace_print_flags_u64 symbols[] = \ + { symbol_array, { -1, NULL } }; \ + ftrace_print_symbols_seq_u64(p, value, symbols); \ + }) +#else +#define __print_symbolic_u64(value, symbol_array...) \ + __print_symbolic(value, symbol_array) +#endif + #undef __print_hex #define __print_hex(buf, buf_len) ftrace_print_hex_seq(p, buf, buf_len) diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index cf535ccedc86..e37de492a9e1 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -353,6 +353,33 @@ ftrace_print_symbols_seq(struct trace_seq *p, unsigned long val, } EXPORT_SYMBOL(ftrace_print_symbols_seq); +#if BITS_PER_LONG == 32 +const char * +ftrace_print_symbols_seq_u64(struct trace_seq *p, unsigned long long val, + const struct trace_print_flags_u64 *symbol_array) +{ + int i; + const char *ret = p->buffer + p->len; + + for (i = 0; symbol_array[i].name; i++) { + + if (val != symbol_array[i].mask) + continue; + + trace_seq_puts(p, symbol_array[i].name); + break; + } + + if (!p->len) + trace_seq_printf(p, "0x%llx", val); + + trace_seq_putc(p, 0); + + return ret; +} +EXPORT_SYMBOL(ftrace_print_symbols_seq_u64); +#endif + const char * ftrace_print_hex_seq(struct trace_seq *p, const unsigned char *buf, int buf_len) { -- cgit v1.2.3 From 7f34b746f79c1e1f8fd6d09799d133263ae7a504 Mon Sep 17 00:00:00 2001 From: liubo Date: Tue, 19 Apr 2011 09:35:31 +0800 Subject: tracing: Update btrfs's tracepoints to use u64 interface To avoid 64->32 truncating WARNING, update btrfs's tracepoints. Signed-off-by: Liu Bo Link: http://lkml.kernel.org/r/4DACE6E3.8080200@cn.fujitsu.com Signed-off-by: Steven Rostedt --- include/trace/events/btrfs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/trace/events/btrfs.h b/include/trace/events/btrfs.h index f445cff66ab7..4114129f0794 100644 --- a/include/trace/events/btrfs.h +++ b/include/trace/events/btrfs.h @@ -28,7 +28,7 @@ struct extent_buffer; { BTRFS_SHARED_DATA_REF_KEY, "SHARED_DATA_REF" }) #define __show_root_type(obj) \ - __print_symbolic(obj, \ + __print_symbolic_u64(obj, \ { BTRFS_ROOT_TREE_OBJECTID, "ROOT_TREE" }, \ { BTRFS_EXTENT_TREE_OBJECTID, "EXTENT_TREE" }, \ { BTRFS_CHUNK_TREE_OBJECTID, "CHUNK_TREE" }, \ @@ -125,7 +125,7 @@ DEFINE_EVENT(btrfs__inode, btrfs_inode_evict, ); #define __show_map_type(type) \ - __print_symbolic(type, \ + __print_symbolic_u64(type, \ { EXTENT_MAP_LAST_BYTE, "LAST_BYTE" }, \ { EXTENT_MAP_HOLE, "HOLE" }, \ { EXTENT_MAP_INLINE, "INLINE" }, \ -- cgit v1.2.3 From b1cff0ad1062621ae63cb6c5dc4165191fe2e9f1 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 25 May 2011 14:27:43 -0400 Subject: ftrace: Add internal recursive checks Witold reported a reboot caused by the selftests of the dynamic function tracer. He sent me a config and I used ktest to do a config_bisect on it (as my config did not cause the crash). It pointed out that the problem config was CONFIG_PROVE_RCU. What happened was that if multiple callbacks are attached to the function tracer, we iterate a list of callbacks. Because the list is managed by synchronize_sched() and preempt_disable, the access to the pointers uses rcu_dereference_raw(). When PROVE_RCU is enabled, the rcu_dereference_raw() calls some debugging functions, which happen to be traced. The tracing of the debug function would then call rcu_dereference_raw() which would then call the debug function and then... well you get the idea. I first wrote two different patches to solve this bug. 1) add a __rcu_dereference_raw() that would not do any checks. 2) add notrace to the offending debug functions. Both of these patches worked. Talking with Paul McKenney on IRC, he suggested to add recursion detection instead. This seemed to be a better solution, so I decided to implement it. As the task_struct already has a trace_recursion to detect recursion in the ring buffer, and that has a very small number it allows, I decided to use that same variable to add flags that can detect the recursion inside the infrastructure of the function tracer. I plan to change it so that the task struct bit can be checked in mcount, but as that requires changes to all archs, I will hold that off to the next merge window. Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Frederic Weisbecker Cc: Paul E. McKenney Link: http://lkml.kernel.org/r/1306348063.1465.116.camel@gandalf.stny.rr.com Reported-by: Witold Baryluk Signed-off-by: Steven Rostedt --- include/linux/sched.h | 2 +- kernel/trace/ftrace.c | 13 ++++++++++++- kernel/trace/ring_buffer.c | 10 +++++----- kernel/trace/trace.h | 15 +++++++++++++++ 4 files changed, 33 insertions(+), 7 deletions(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index d8b2d0bec0d8..7b78d9cad471 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1513,7 +1513,7 @@ struct task_struct { #ifdef CONFIG_TRACING /* state flags for use by tracers */ unsigned long trace; - /* bitmask of trace recursion */ + /* bitmask and counter of trace recursion */ unsigned long trace_recursion; #endif /* CONFIG_TRACING */ #ifdef CONFIG_CGROUP_MEM_RES_CTLR /* memcg uses this to do batch job */ diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 25949b33057c..1ee417fcbfa5 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -109,12 +109,18 @@ ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip); static void ftrace_global_list_func(unsigned long ip, unsigned long parent_ip) { - struct ftrace_ops *op = rcu_dereference_raw(ftrace_global_list); /*see above*/ + struct ftrace_ops *op; + + if (unlikely(trace_recursion_test(TRACE_GLOBAL_BIT))) + return; + trace_recursion_set(TRACE_GLOBAL_BIT); + op = rcu_dereference_raw(ftrace_global_list); /*see above*/ while (op != &ftrace_list_end) { op->func(ip, parent_ip); op = rcu_dereference_raw(op->next); /*see above*/ }; + trace_recursion_clear(TRACE_GLOBAL_BIT); } static void ftrace_pid_func(unsigned long ip, unsigned long parent_ip) @@ -3490,6 +3496,10 @@ ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip) { struct ftrace_ops *op; + if (unlikely(trace_recursion_test(TRACE_INTERNAL_BIT))) + return; + + trace_recursion_set(TRACE_INTERNAL_BIT); /* * Some of the ops may be dynamically allocated, * they must be freed after a synchronize_sched(). @@ -3502,6 +3512,7 @@ ftrace_ops_list_func(unsigned long ip, unsigned long parent_ip) op = rcu_dereference_raw(op->next); }; preempt_enable_notrace(); + trace_recursion_clear(TRACE_INTERNAL_BIT); } static void clear_ftrace_swapper(void) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 0ef7b4b2a1f7..b0c7aa407943 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -2216,7 +2216,7 @@ static noinline void trace_recursive_fail(void) printk_once(KERN_WARNING "Tracing recursion: depth[%ld]:" "HC[%lu]:SC[%lu]:NMI[%lu]\n", - current->trace_recursion, + trace_recursion_buffer(), hardirq_count() >> HARDIRQ_SHIFT, softirq_count() >> SOFTIRQ_SHIFT, in_nmi()); @@ -2226,9 +2226,9 @@ static noinline void trace_recursive_fail(void) static inline int trace_recursive_lock(void) { - current->trace_recursion++; + trace_recursion_inc(); - if (likely(current->trace_recursion < TRACE_RECURSIVE_DEPTH)) + if (likely(trace_recursion_buffer() < TRACE_RECURSIVE_DEPTH)) return 0; trace_recursive_fail(); @@ -2238,9 +2238,9 @@ static inline int trace_recursive_lock(void) static inline void trace_recursive_unlock(void) { - WARN_ON_ONCE(!current->trace_recursion); + WARN_ON_ONCE(!trace_recursion_buffer()); - current->trace_recursion--; + trace_recursion_dec(); } #else diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 6b69c4bd306f..229f8591f61d 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -784,4 +784,19 @@ extern const char *__stop___trace_bprintk_fmt[]; FTRACE_ENTRY(call, struct_name, id, PARAMS(tstruct), PARAMS(print)) #include "trace_entries.h" +/* Only current can touch trace_recursion */ +#define trace_recursion_inc() do { (current)->trace_recursion++; } while (0) +#define trace_recursion_dec() do { (current)->trace_recursion--; } while (0) + +/* Ring buffer has the 10 LSB bits to count */ +#define trace_recursion_buffer() ((current)->trace_recursion & 0x3ff) + +/* for function tracing recursion */ +#define TRACE_INTERNAL_BIT (1<<11) +#define TRACE_GLOBAL_BIT (1<<12) + +#define trace_recursion_set(bit) do { (current)->trace_recursion |= (bit); } while (0) +#define trace_recursion_clear(bit) do { (current)->trace_recursion &= ~(bit); } while (0) +#define trace_recursion_test(bit) ((current)->trace_recursion & (bit)) + #endif /* _LINUX_KERNEL_TRACE_H */ -- cgit v1.2.3 From 4bff4a7ee4b9e487a1bc1d31082e77b6a381418a Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 11 May 2011 16:51:20 +0000 Subject: ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIO On sh7372 the card-detection pin of SDHI0 can also produce interrupts, when configured as GPIO. Use this feature to power down SDHI0, when no card is plugged in. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index d4fe74067d6c..776f20560e72 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include #include @@ -913,6 +914,17 @@ static int slot_cn7_get_cd(struct platform_device *pdev) } /* SDHI0 */ +static irqreturn_t mackerel_sdhi0_gpio_cd(int irq, void *arg) +{ + struct device *dev = arg; + struct sh_mobile_sdhi_info *info = dev->platform_data; + struct tmio_mmc_data *pdata = info->pdata; + + tmio_mmc_cd_wakeup(pdata); + + return IRQ_HANDLED; +} + static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, @@ -1296,6 +1308,7 @@ static void __init mackerel_init(void) { u32 srcr4; struct clk *clk; + int ret; sh7372_pinmux_init(); @@ -1401,6 +1414,13 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); + ret = request_irq(evt2irq(0x3340), mackerel_sdhi0_gpio_cd, + IRQF_TRIGGER_FALLING, "sdhi0 cd", &sdhi0_device.dev); + if (!ret) + sdhi0_info.tmio_flags |= TMIO_MMC_HAS_COLD_CD; + else + pr_err("Cannot get IRQ #%d: %d\n", evt2irq(0x3340), ret); + #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); -- cgit v1.2.3 From f2b3614cefb61ee6046a0aaee503ee37f227d310 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 26 May 2011 08:09:38 +0200 Subject: ALSA: PCM - Don't check DMA time-out too shortly When the PCM period size is set larger than 10 seconds, currently the PCM core may abort the operation with DMA-error due to the fixed timeout for 10 seconds. A similar problem is seen in the drain operation that has a fixed timeout of 10 seconds, too. This patch fixes the timeout length depending on the period size and rate, also including the consideration of no_period_wakeup flag. Reported-by: Raymond Yau Signed-off-by: Takashi Iwai --- sound/core/pcm_lib.c | 17 +++++++++++++---- sound/core/pcm_native.c | 13 +++++++++++-- 2 files changed, 24 insertions(+), 6 deletions(-) diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index abfeff1611ce..f1341308beda 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -1756,8 +1756,18 @@ static int wait_for_avail(struct snd_pcm_substream *substream, wait_queue_t wait; int err = 0; snd_pcm_uframes_t avail = 0; - long tout; - + long wait_time, tout; + + if (runtime->no_period_wakeup) + wait_time = MAX_SCHEDULE_TIMEOUT; + else { + wait_time = 10; + if (runtime->rate) { + long t = runtime->period_size * 2 / runtime->rate; + wait_time = max(t, wait_time); + } + wait_time = msecs_to_jiffies(wait_time * 1000); + } init_waitqueue_entry(&wait, current); add_wait_queue(&runtime->tsleep, &wait); for (;;) { @@ -1765,9 +1775,8 @@ static int wait_for_avail(struct snd_pcm_substream *substream, err = -ERESTARTSYS; break; } - set_current_state(TASK_INTERRUPTIBLE); snd_pcm_stream_unlock_irq(substream); - tout = schedule_timeout(msecs_to_jiffies(10000)); + tout = schedule_timeout_interruptible(wait_time); snd_pcm_stream_lock_irq(substream); switch (runtime->status->state) { case SNDRV_PCM_STATE_SUSPENDED: diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index 1a07750f3836..b597408d5faa 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1481,11 +1481,20 @@ static int snd_pcm_drain(struct snd_pcm_substream *substream, break; /* all drained */ init_waitqueue_entry(&wait, current); add_wait_queue(&to_check->sleep, &wait); - set_current_state(TASK_INTERRUPTIBLE); snd_pcm_stream_unlock_irq(substream); up_read(&snd_pcm_link_rwsem); snd_power_unlock(card); - tout = schedule_timeout(10 * HZ); + if (runtime->no_period_wakeup) + tout = MAX_SCHEDULE_TIMEOUT; + else { + tout = 10; + if (runtime->rate) { + long t = runtime->period_size * 2 / runtime->rate; + tout = max(t, tout); + } + tout = msecs_to_jiffies(tout * 1000); + } + tout = schedule_timeout_interruptible(tout); snd_power_lock(card); down_read(&snd_pcm_link_rwsem); snd_pcm_stream_lock_irq(substream); -- cgit v1.2.3 From 739266566ae9ba6b01ed3a01165171705fa2974e Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Wed, 25 May 2011 12:42:13 -0600 Subject: ALSA: HDA: Increase MAX_HDMI_PINS The recently introduced NVIDIA GeForce GT 520 has 4 pins within a single codec. Bump MAX_HDMI_PINS to accomodate this. Also bump MAX_HDMI_CVTS to match it; this might be needed later too. Signed-off-by: Stephen Warren Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index d786ecc56801..bd0ae697f9c4 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -48,8 +48,8 @@ MODULE_PARM_DESC(static_hdmi_pcm, "Don't restrict PCM parameters per ELD info"); * * The HDA correspondence of pipes/ports are converter/pin nodes. */ -#define MAX_HDMI_CVTS 3 -#define MAX_HDMI_PINS 3 +#define MAX_HDMI_CVTS 4 +#define MAX_HDMI_PINS 4 struct hdmi_spec { int num_cvts; @@ -1027,6 +1027,7 @@ static char *generic_hdmi_pcm_names[MAX_HDMI_CVTS] = { "HDMI 0", "HDMI 1", "HDMI 2", + "HDMI 3", }; /* -- cgit v1.2.3 From 78fa2c4d2465d014e67d3e12d948425856587251 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Wed, 25 May 2011 22:43:27 +0200 Subject: ALSA: core: remove unused variables. Drop a few variables that are never read. Signed-off-by: Luca Tettamanti Signed-off-by: Takashi Iwai --- sound/core/control.c | 3 +-- sound/core/init.c | 3 --- sound/core/oss/linear.c | 3 --- sound/core/pcm_native.c | 8 -------- sound/core/seq/seq_queue.c | 2 -- 5 files changed, 1 insertion(+), 18 deletions(-) diff --git a/sound/core/control.c b/sound/core/control.c index 5d98194bcad5..f8c5be464510 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -704,13 +704,12 @@ static int snd_ctl_elem_list(struct snd_card *card, struct snd_ctl_elem_list list; struct snd_kcontrol *kctl; struct snd_ctl_elem_id *dst, *id; - unsigned int offset, space, first, jidx; + unsigned int offset, space, jidx; if (copy_from_user(&list, _list, sizeof(list))) return -EFAULT; offset = list.offset; space = list.space; - first = 0; /* try limit maximum space */ if (space > 16384) return -ENOMEM; diff --git a/sound/core/init.c b/sound/core/init.c index 30ecad41403c..2c041bb36ab3 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -342,7 +342,6 @@ static const struct file_operations snd_shutdown_f_ops = int snd_card_disconnect(struct snd_card *card) { struct snd_monitor_file *mfile; - struct file *file; int err; if (!card) @@ -366,8 +365,6 @@ int snd_card_disconnect(struct snd_card *card) spin_lock(&card->files_lock); list_for_each_entry(mfile, &card->files_list, list) { - file = mfile->file; - /* it's critical part, use endless loop */ /* we have no room to fail */ mfile->disconnected_f_op = mfile->file->f_op; diff --git a/sound/core/oss/linear.c b/sound/core/oss/linear.c index 13b3f6f49fae..2045697f449d 100644 --- a/sound/core/oss/linear.c +++ b/sound/core/oss/linear.c @@ -90,11 +90,8 @@ static snd_pcm_sframes_t linear_transfer(struct snd_pcm_plugin *plugin, struct snd_pcm_plugin_channel *dst_channels, snd_pcm_uframes_t frames) { - struct linear_priv *data; - if (snd_BUG_ON(!plugin || !src_channels || !dst_channels)) return -ENXIO; - data = (struct linear_priv *)plugin->extra_data; if (frames == 0) return 0; #ifdef CONFIG_SND_DEBUG diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c index b597408d5faa..1c6be91dfb98 100644 --- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -1527,13 +1527,11 @@ static int snd_pcm_drain(struct snd_pcm_substream *substream, static int snd_pcm_drop(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime; - struct snd_card *card; int result = 0; if (PCM_RUNTIME_CHECK(substream)) return -ENXIO; runtime = substream->runtime; - card = substream->pcm->card; if (runtime->status->state == SNDRV_PCM_STATE_OPEN || runtime->status->state == SNDRV_PCM_STATE_DISCONNECTED || @@ -2065,7 +2063,6 @@ static int snd_pcm_open_file(struct file *file, { struct snd_pcm_file *pcm_file; struct snd_pcm_substream *substream; - struct snd_pcm_str *str; int err; if (rpcm_file) @@ -2082,7 +2079,6 @@ static int snd_pcm_open_file(struct file *file, } pcm_file->substream = substream; if (substream->ref_count == 1) { - str = substream->pstr; substream->file = pcm_file; substream->pcm_release = pcm_release_private; } @@ -3024,11 +3020,9 @@ static const struct vm_operations_struct snd_pcm_vm_ops_status = static int snd_pcm_mmap_status(struct snd_pcm_substream *substream, struct file *file, struct vm_area_struct *area) { - struct snd_pcm_runtime *runtime; long size; if (!(area->vm_flags & VM_READ)) return -EINVAL; - runtime = substream->runtime; size = area->vm_end - area->vm_start; if (size != PAGE_ALIGN(sizeof(struct snd_pcm_mmap_status))) return -EINVAL; @@ -3063,11 +3057,9 @@ static const struct vm_operations_struct snd_pcm_vm_ops_control = static int snd_pcm_mmap_control(struct snd_pcm_substream *substream, struct file *file, struct vm_area_struct *area) { - struct snd_pcm_runtime *runtime; long size; if (!(area->vm_flags & VM_READ)) return -EINVAL; - runtime = substream->runtime; size = area->vm_end - area->vm_start; if (size != PAGE_ALIGN(sizeof(struct snd_pcm_mmap_control))) return -EINVAL; diff --git a/sound/core/seq/seq_queue.c b/sound/core/seq/seq_queue.c index e7a8e9e4edb2..f9077361c119 100644 --- a/sound/core/seq/seq_queue.c +++ b/sound/core/seq/seq_queue.c @@ -467,13 +467,11 @@ int snd_seq_queue_timer_open(int queueid) int snd_seq_queue_timer_close(int queueid) { struct snd_seq_queue *queue; - struct snd_seq_timer *tmr; int result = 0; queue = queueptr(queueid); if (queue == NULL) return -EINVAL; - tmr = queue->timer; snd_seq_timer_close(queue); queuefree(queue); return result; -- cgit v1.2.3 From 9e3bb6b6f6a0c535eb053fbf0005a8e79e053374 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 24 May 2011 07:51:27 +0200 Subject: KVM: add missing void __user * cast to access_ok() call fa3d315a "KVM: Validate userspace_addr of memslot when registered" introduced this new warning onn s390: kvm_main.c: In function '__kvm_set_memory_region': kvm_main.c:654:7: warning: passing argument 1 of '__access_ok' makes pointer from integer without a cast arch/s390/include/asm/uaccess.h:53:19: note: expected 'const void *' but argument is of type '__u64' Add the missing cast to get rid of it again... Cc: Takuya Yoshikawa Signed-off-by: Heiko Carstens Signed-off-by: Avi Kivity --- virt/kvm/kvm_main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 22cdb960660a..383f492a6603 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -651,7 +651,9 @@ int __kvm_set_memory_region(struct kvm *kvm, /* We can read the guest memory with __xxx_user() later on. */ if (user_alloc && ((mem->userspace_addr & (PAGE_SIZE - 1)) || - !access_ok(VERIFY_WRITE, mem->userspace_addr, mem->memory_size))) + !access_ok(VERIFY_WRITE, + (void __user *)(unsigned long)mem->userspace_addr, + mem->memory_size))) goto out; if (mem->slot >= KVM_MEMORY_SLOTS + KVM_PRIVATE_MEM_SLOTS) goto out; -- cgit v1.2.3 From 902050bcdece6191565c055539e82c5cc534feed Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 26 May 2011 09:48:22 +0200 Subject: [S390] pfault: always enable service signal interrupt Always enable the service signal subclass mask bit in cr0, if pfault is available. That way we use the normal cpu hotplug way to propagate the subclass mask bit in cr0 instead of open coding it. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/mm/fault.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index a0f9e730f26a..e46ba2927424 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -485,7 +485,6 @@ int pfault_init(void) "2:\n" EX_TABLE(0b,1b) : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc"); - __ctl_set_bit(0, 9); return rc; } @@ -500,7 +499,6 @@ void pfault_fini(void) if (!MACHINE_IS_VM || pfault_disable) return; - __ctl_clear_bit(0,9); asm volatile( " diag %0,0,0x258\n" "0:\n" @@ -615,6 +613,7 @@ static int __init pfault_irq_init(void) rc = pfault_init() == 0 ? 0 : -EOPNOTSUPP; if (rc) goto out_pfault; + ctl_set_bit(0, 9); hotcpu_notifier(pfault_cpu_notify, 0); return 0; -- cgit v1.2.3 From df7997ab1ca82ae3c37a2f5eb98613fc24527f95 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 26 May 2011 09:48:23 +0200 Subject: [S390] irq: fix service signal external interrupt handling Interrupt sources like pfault, sclp, dasd_diag and virtio all use the service signal external interrupt subclass mask in control register 0 to enable and disable the corresponding interrupt. Because no reference counting is implemented each subsystem thinks it is the only user of subclass and sets and clears the bit like it wants. This leads to case that unloading the dasd diag module under z/VM causes both sclp and pfault interrupts to be masked. The result will be locked up system sooner or later. Fix this by introducing a new way to set (register) and clear (unregister) the service signal subclass mask bit in cr0. Also convert all drivers. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/s390_ext.h | 2 ++ arch/s390/kernel/s390_ext.c | 23 +++++++++++++++++++++++ arch/s390/mm/fault.c | 2 +- drivers/s390/block/dasd_diag.c | 4 ++-- drivers/s390/char/sclp.c | 6 +++--- drivers/s390/kvm/kvm_virtio.c | 2 +- 6 files changed, 32 insertions(+), 7 deletions(-) diff --git a/arch/s390/include/asm/s390_ext.h b/arch/s390/include/asm/s390_ext.h index 080876d5f196..85b2154b899f 100644 --- a/arch/s390/include/asm/s390_ext.h +++ b/arch/s390/include/asm/s390_ext.h @@ -13,5 +13,7 @@ typedef void (*ext_int_handler_t)(unsigned int, unsigned int, unsigned long); int register_external_interrupt(__u16 code, ext_int_handler_t handler); int unregister_external_interrupt(__u16 code, ext_int_handler_t handler); +void service_subclass_irq_register(void); +void service_subclass_irq_unregister(void); #endif /* _S390_EXTINT_H */ diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c index 185029919c4d..87b5c532abf1 100644 --- a/arch/s390/kernel/s390_ext.c +++ b/arch/s390/kernel/s390_ext.c @@ -106,3 +106,26 @@ void __irq_entry do_extint(struct pt_regs *regs, unsigned int ext_int_code, irq_exit(); set_irq_regs(old_regs); } + +static DEFINE_SPINLOCK(sc_irq_lock); +static int sc_irq_refcount; + +void service_subclass_irq_register(void) +{ + spin_lock(&sc_irq_lock); + if (!sc_irq_refcount) + ctl_set_bit(0, 9); + sc_irq_refcount++; + spin_unlock(&sc_irq_lock); +} +EXPORT_SYMBOL(service_subclass_irq_register); + +void service_subclass_irq_unregister(void) +{ + spin_lock(&sc_irq_lock); + sc_irq_refcount--; + if (!sc_irq_refcount) + ctl_clear_bit(0, 9); + spin_unlock(&sc_irq_lock); +} +EXPORT_SYMBOL(service_subclass_irq_unregister); diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index e46ba2927424..6e922b50efa4 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -613,7 +613,7 @@ static int __init pfault_irq_init(void) rc = pfault_init() == 0 ? 0 : -EOPNOTSUPP; if (rc) goto out_pfault; - ctl_set_bit(0, 9); + service_subclass_irq_register(); hotcpu_notifier(pfault_cpu_notify, 0); return 0; diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index 85dddb1e4126..5e8e82db1886 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -642,7 +642,7 @@ dasd_diag_init(void) } ASCEBC(dasd_diag_discipline.ebcname, 4); - ctl_set_bit(0, 9); + service_subclass_irq_register(); register_external_interrupt(0x2603, dasd_ext_handler); dasd_diag_discipline_pointer = &dasd_diag_discipline; return 0; @@ -652,7 +652,7 @@ static void __exit dasd_diag_cleanup(void) { unregister_external_interrupt(0x2603, dasd_ext_handler); - ctl_clear_bit(0, 9); + service_subclass_irq_unregister(); dasd_diag_discipline_pointer = NULL; } diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index b76c61f82485..b37b98cbbd00 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -885,12 +885,12 @@ sclp_check_interface(void) spin_unlock_irqrestore(&sclp_lock, flags); /* Enable service-signal interruption - needs to happen * with IRQs enabled. */ - ctl_set_bit(0, 9); + service_subclass_irq_register(); /* Wait for signal from interrupt or timeout */ sclp_sync_wait(); /* Disable service-signal interruption - needs to happen * with IRQs enabled. */ - ctl_clear_bit(0,9); + service_subclass_irq_unregister(); spin_lock_irqsave(&sclp_lock, flags); del_timer(&sclp_request_timer); if (sclp_init_req.status == SCLP_REQ_DONE && @@ -1070,7 +1070,7 @@ sclp_init(void) spin_unlock_irqrestore(&sclp_lock, flags); /* Enable service-signal external interruption - needs to happen with * IRQs enabled. */ - ctl_set_bit(0, 9); + service_subclass_irq_register(); sclp_init_mask(1); return 0; diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 607998f0b7d8..724b5923b6e2 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -441,7 +441,7 @@ static int __init kvm_devices_init(void) INIT_WORK(&hotplug_work, hotplug_devices); - ctl_set_bit(0, 9); + service_subclass_irq_register(); register_external_interrupt(0x2603, kvm_extint_handler); scan_devices(); -- cgit v1.2.3 From d7b250e2a2d7f3cd23cf8d8d6689285e6f51a98d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 26 May 2011 09:48:24 +0200 Subject: [S390] irq: merge irq.c and s390_ext.c Merge irq.c and s390_ext.c into irq.c. That way all external interrupt related functions are together. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/irq.h | 8 +++ arch/s390/include/asm/s390_ext.h | 19 ------ arch/s390/kernel/Makefile | 8 +-- arch/s390/kernel/dis.c | 2 +- arch/s390/kernel/irq.c | 137 ++++++++++++++++++++++++++++++++++++--- arch/s390/kernel/s390_ext.c | 131 ------------------------------------- arch/s390/kernel/smp.c | 1 - arch/s390/kernel/time.c | 1 - arch/s390/kernel/topology.c | 1 - arch/s390/kernel/traps.c | 1 - arch/s390/kernel/vtime.c | 2 +- arch/s390/mm/fault.c | 2 +- arch/s390/oprofile/hwsampler.c | 2 +- drivers/s390/block/dasd_diag.c | 2 +- drivers/s390/char/sclp.c | 1 - drivers/s390/kvm/kvm_virtio.c | 1 - net/iucv/iucv.c | 2 +- 17 files changed, 147 insertions(+), 174 deletions(-) delete mode 100644 arch/s390/include/asm/s390_ext.h delete mode 100644 arch/s390/kernel/s390_ext.c diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h index 1544b90bd6d6..ba7b01c726a3 100644 --- a/arch/s390/include/asm/irq.h +++ b/arch/s390/include/asm/irq.h @@ -2,6 +2,7 @@ #define _ASM_IRQ_H #include +#include enum interruption_class { EXTERNAL_INTERRUPT, @@ -31,4 +32,11 @@ enum interruption_class { NR_IRQS, }; +typedef void (*ext_int_handler_t)(unsigned int, unsigned int, unsigned long); + +int register_external_interrupt(u16 code, ext_int_handler_t handler); +int unregister_external_interrupt(u16 code, ext_int_handler_t handler); +void service_subclass_irq_register(void); +void service_subclass_irq_unregister(void); + #endif /* _ASM_IRQ_H */ diff --git a/arch/s390/include/asm/s390_ext.h b/arch/s390/include/asm/s390_ext.h deleted file mode 100644 index 85b2154b899f..000000000000 --- a/arch/s390/include/asm/s390_ext.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright IBM Corp. 1999,2010 - * Author(s): Holger Smolinski , - * Martin Schwidefsky , - */ - -#ifndef _S390_EXTINT_H -#define _S390_EXTINT_H - -#include - -typedef void (*ext_int_handler_t)(unsigned int, unsigned int, unsigned long); - -int register_external_interrupt(__u16 code, ext_int_handler_t handler); -int unregister_external_interrupt(__u16 code, ext_int_handler_t handler); -void service_subclass_irq_register(void); -void service_subclass_irq_unregister(void); - -#endif /* _S390_EXTINT_H */ diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 5ff15dacb571..df3732249baa 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -20,10 +20,10 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"' CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w -obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o \ - processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ - s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \ - vdso.o vtime.o sysinfo.o nmi.o sclp.o jump_label.o +obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o vtime.o \ + processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o nmi.o \ + debug.o irq.o ipl.o dis.o diag.o mem_detect.o sclp.o vdso.o \ + sysinfo.o jump_label.o obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o) obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o) diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index 3d4a78fc1adc..1ca3d1d6a86c 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -30,9 +30,9 @@ #include #include #include -#include #include #include +#include #ifndef CONFIG_64BIT #define ONELONG "%08lx: " diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index e204f9597aaf..e3264f6a9720 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -1,19 +1,28 @@ /* - * Copyright IBM Corp. 2004,2010 - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Thomas Spatzier (tspat@de.ibm.com) + * Copyright IBM Corp. 2004,2011 + * Author(s): Martin Schwidefsky , + * Holger Smolinski , + * Thomas Spatzier , * * This file contains interrupt related functions. */ -#include -#include #include #include #include -#include #include #include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "entry.h" struct irq_class { char *name; @@ -82,8 +91,7 @@ int show_interrupts(struct seq_file *p, void *v) * For compatibilty only. S/390 specific setup of interrupts et al. is done * much later in init_channel_subsystem(). */ -void __init -init_IRQ(void) +void __init init_IRQ(void) { /* nothing... */ } @@ -134,3 +142,116 @@ void init_irq_proc(void) create_prof_cpu_mask(root_irq_dir); } #endif + +/* + * ext_int_hash[index] is the start of the list for all external interrupts + * that hash to this index. With the current set of external interrupts + * (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000 + * iucv and 0x2603 pfault) this is always the first element. + */ + +struct ext_int_info { + struct ext_int_info *next; + ext_int_handler_t handler; + u16 code; +}; + +static struct ext_int_info *ext_int_hash[256]; + +static inline int ext_hash(u16 code) +{ + return (code + (code >> 9)) & 0xff; +} + +int register_external_interrupt(u16 code, ext_int_handler_t handler) +{ + struct ext_int_info *p; + int index; + + p = kmalloc(sizeof(*p), GFP_ATOMIC); + if (!p) + return -ENOMEM; + p->code = code; + p->handler = handler; + index = ext_hash(code); + p->next = ext_int_hash[index]; + ext_int_hash[index] = p; + return 0; +} +EXPORT_SYMBOL(register_external_interrupt); + +int unregister_external_interrupt(u16 code, ext_int_handler_t handler) +{ + struct ext_int_info *p, *q; + int index; + + index = ext_hash(code); + q = NULL; + p = ext_int_hash[index]; + while (p) { + if (p->code == code && p->handler == handler) + break; + q = p; + p = p->next; + } + if (!p) + return -ENOENT; + if (q) + q->next = p->next; + else + ext_int_hash[index] = p->next; + kfree(p); + return 0; +} +EXPORT_SYMBOL(unregister_external_interrupt); + +void __irq_entry do_extint(struct pt_regs *regs, unsigned int ext_int_code, + unsigned int param32, unsigned long param64) +{ + struct pt_regs *old_regs; + unsigned short code; + struct ext_int_info *p; + int index; + + code = (unsigned short) ext_int_code; + old_regs = set_irq_regs(regs); + s390_idle_check(regs, S390_lowcore.int_clock, + S390_lowcore.async_enter_timer); + irq_enter(); + if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) + /* Serve timer interrupts first. */ + clock_comparator_work(); + kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; + if (code != 0x1004) + __get_cpu_var(s390_idle).nohz_delay = 1; + index = ext_hash(code); + for (p = ext_int_hash[index]; p; p = p->next) { + if (likely(p->code == code)) + p->handler(ext_int_code, param32, param64); + } + irq_exit(); + set_irq_regs(old_regs); +} + +static DEFINE_SPINLOCK(sc_irq_lock); +static int sc_irq_refcount; + +void service_subclass_irq_register(void) +{ + spin_lock(&sc_irq_lock); + if (!sc_irq_refcount) + ctl_set_bit(0, 9); + sc_irq_refcount++; + spin_unlock(&sc_irq_lock); +} +EXPORT_SYMBOL(service_subclass_irq_register); + +void service_subclass_irq_unregister(void) +{ + spin_lock(&sc_irq_lock); + sc_irq_refcount--; + if (!sc_irq_refcount) + ctl_clear_bit(0, 9); + spin_unlock(&sc_irq_lock); +} +EXPORT_SYMBOL(service_subclass_irq_unregister); diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c deleted file mode 100644 index 87b5c532abf1..000000000000 --- a/arch/s390/kernel/s390_ext.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Copyright IBM Corp. 1999,2010 - * Author(s): Holger Smolinski , - * Martin Schwidefsky , - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "entry.h" - -struct ext_int_info { - struct ext_int_info *next; - ext_int_handler_t handler; - __u16 code; -}; - -/* - * ext_int_hash[index] is the start of the list for all external interrupts - * that hash to this index. With the current set of external interrupts - * (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000 - * iucv and 0x2603 pfault) this is always the first element. - */ -static struct ext_int_info *ext_int_hash[256]; - -static inline int ext_hash(__u16 code) -{ - return (code + (code >> 9)) & 0xff; -} - -int register_external_interrupt(__u16 code, ext_int_handler_t handler) -{ - struct ext_int_info *p; - int index; - - p = kmalloc(sizeof(*p), GFP_ATOMIC); - if (!p) - return -ENOMEM; - p->code = code; - p->handler = handler; - index = ext_hash(code); - p->next = ext_int_hash[index]; - ext_int_hash[index] = p; - return 0; -} -EXPORT_SYMBOL(register_external_interrupt); - -int unregister_external_interrupt(__u16 code, ext_int_handler_t handler) -{ - struct ext_int_info *p, *q; - int index; - - index = ext_hash(code); - q = NULL; - p = ext_int_hash[index]; - while (p) { - if (p->code == code && p->handler == handler) - break; - q = p; - p = p->next; - } - if (!p) - return -ENOENT; - if (q) - q->next = p->next; - else - ext_int_hash[index] = p->next; - kfree(p); - return 0; -} -EXPORT_SYMBOL(unregister_external_interrupt); - -void __irq_entry do_extint(struct pt_regs *regs, unsigned int ext_int_code, - unsigned int param32, unsigned long param64) -{ - struct pt_regs *old_regs; - unsigned short code; - struct ext_int_info *p; - int index; - - code = (unsigned short) ext_int_code; - old_regs = set_irq_regs(regs); - s390_idle_check(regs, S390_lowcore.int_clock, - S390_lowcore.async_enter_timer); - irq_enter(); - if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) - /* Serve timer interrupts first. */ - clock_comparator_work(); - kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; - if (code != 0x1004) - __get_cpu_var(s390_idle).nohz_delay = 1; - index = ext_hash(code); - for (p = ext_int_hash[index]; p; p = p->next) { - if (likely(p->code == code)) - p->handler(ext_int_code, param32, param64); - } - irq_exit(); - set_irq_regs(old_regs); -} - -static DEFINE_SPINLOCK(sc_irq_lock); -static int sc_irq_refcount; - -void service_subclass_irq_register(void) -{ - spin_lock(&sc_irq_lock); - if (!sc_irq_refcount) - ctl_set_bit(0, 9); - sc_irq_refcount++; - spin_unlock(&sc_irq_lock); -} -EXPORT_SYMBOL(service_subclass_irq_register); - -void service_subclass_irq_unregister(void) -{ - spin_lock(&sc_irq_lock); - sc_irq_refcount--; - if (!sc_irq_refcount) - ctl_clear_bit(0, 9); - spin_unlock(&sc_irq_lock); -} -EXPORT_SYMBOL(service_subclass_irq_unregister); diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index f8e85ecbc459..52420d2785b3 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -44,7 +44,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index a59557f1fb5f..dff933065ab6 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -41,7 +41,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 2eafb8c7a746..0cd340b72632 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -17,7 +17,6 @@ #include #include #include -#include #define PTF_HORIZONTAL (0UL) #define PTF_VERTICAL (1UL) diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index b5a4a739b477..a65d2e82f61d 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include "entry.h" diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 5e8ead4b4aba..2d6228f60cd6 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -22,10 +22,10 @@ #include #include -#include #include #include #include +#include static DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer); diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 6e922b50efa4..105fa1071435 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include #include "../kernel/entry.h" diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index 053caa0fd276..4634c9ef9722 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -19,7 +19,7 @@ #include #include -#include +#include #include "hwsampler.h" diff --git a/drivers/s390/block/dasd_diag.c b/drivers/s390/block/dasd_diag.c index 5e8e82db1886..46784b83c5c4 100644 --- a/drivers/s390/block/dasd_diag.c +++ b/drivers/s390/block/dasd_diag.c @@ -24,7 +24,7 @@ #include #include #include -#include +#include #include #include diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c index b37b98cbbd00..eaa7e78186f9 100644 --- a/drivers/s390/char/sclp.c +++ b/drivers/s390/char/sclp.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 724b5923b6e2..aec60d55b10d 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #define VIRTIO_SUBCODE_64 0x0D00 diff --git a/net/iucv/iucv.c b/net/iucv/iucv.c index a15c01524959..7f9124914b13 100644 --- a/net/iucv/iucv.c +++ b/net/iucv/iucv.c @@ -54,7 +54,7 @@ #include #include #include -#include +#include #include /* -- cgit v1.2.3 From 7683f7444875c822f48f03a9f9c8b1b1e98b2ef0 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 26 May 2011 09:48:25 +0200 Subject: [S390] uaccess: turn __access_ok() into a define Turn __access_ok() into a define and add a __chk_user_ptr() call instead. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/uaccess.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h index 2d9ea11f919a..2b23885e81e9 100644 --- a/arch/s390/include/asm/uaccess.h +++ b/arch/s390/include/asm/uaccess.h @@ -49,12 +49,13 @@ #define segment_eq(a,b) ((a).ar4 == (b).ar4) +#define __access_ok(addr, size) \ +({ \ + __chk_user_ptr(addr); \ + 1; \ +}) -static inline int __access_ok(const void __user *addr, unsigned long size) -{ - return 1; -} -#define access_ok(type,addr,size) __access_ok(addr,size) +#define access_ok(type, addr, size) __access_ok(addr, size) /* * The exception table consists of pairs of addresses: the first is the -- cgit v1.2.3 From b07c9015efcde71ed929ce5ded0268630bb1c95e Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 26 May 2011 09:48:26 +0200 Subject: [S390] hwsampler: allow cpu hotplug The hardware sample cpu hotplug notifier always returns NOTIFY_BAD. That will prevent cpu hotplug if the machine is enabled for hardware sampling even if it is not used. Fix the cpu hotplug notifier and allow cpu hotplug if hardware sampling is unused. Signed-off-by: Martin Schwidefsky Signed-off-by: Heiko Carstens --- arch/s390/oprofile/hwsampler.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index 4634c9ef9722..4552ce40c81a 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -580,7 +580,7 @@ static int hws_cpu_callback(struct notifier_block *nfb, { /* We do not have sampler space available for all possible CPUs. All CPUs should be online when hw sampling is activated. */ - return NOTIFY_BAD; + return (hws_state <= HWS_DEALLOCATED) ? NOTIFY_OK : NOTIFY_BAD; } static struct notifier_block hws_cpu_notifier = { -- cgit v1.2.3 From ac5fa22fd4f27376e4ec41b44279c9992322d7ce Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 26 May 2011 09:48:27 +0200 Subject: [S390] topology,sched: fix cpu_coregroup_mask/cpu_book_mask definitions Both functions take an int instead of an unsigned int. Fixes these compile warnings: kernel/sched.c:7167:2: warning: initialization from incompatible pointer type kernel/sched.c:7170:2: warning: initialization from incompatible pointer type Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/topology.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h index c5338834ddbd..005d77d8ae2a 100644 --- a/arch/s390/include/asm/topology.h +++ b/arch/s390/include/asm/topology.h @@ -7,7 +7,7 @@ extern unsigned char cpu_core_id[NR_CPUS]; extern cpumask_t cpu_core_map[NR_CPUS]; -static inline const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +static inline const struct cpumask *cpu_coregroup_mask(int cpu) { return &cpu_core_map[cpu]; } @@ -21,7 +21,7 @@ static inline const struct cpumask *cpu_coregroup_mask(unsigned int cpu) extern unsigned char cpu_book_id[NR_CPUS]; extern cpumask_t cpu_book_map[NR_CPUS]; -static inline const struct cpumask *cpu_book_mask(unsigned int cpu) +static inline const struct cpumask *cpu_book_mask(int cpu) { return &cpu_book_map[cpu]; } -- cgit v1.2.3 From b396637841fff79e9520514e8dcbe769c20a2ea0 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 26 May 2011 09:48:28 +0200 Subject: [S390] delay: implement ndelay Implement ndelay() on s390 as well. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/delay.h | 8 +++++--- arch/s390/lib/delay.c | 15 +++++++++++++++ 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/arch/s390/include/asm/delay.h b/arch/s390/include/asm/delay.h index 8a096b83f51f..0e3b35f96be1 100644 --- a/arch/s390/include/asm/delay.h +++ b/arch/s390/include/asm/delay.h @@ -14,10 +14,12 @@ #ifndef _S390_DELAY_H #define _S390_DELAY_H -extern void __udelay(unsigned long long usecs); -extern void udelay_simple(unsigned long long usecs); -extern void __delay(unsigned long loops); +void __ndelay(unsigned long long nsecs); +void __udelay(unsigned long long usecs); +void udelay_simple(unsigned long long usecs); +void __delay(unsigned long loops); +#define ndelay(n) __ndelay((unsigned long long) (n)) #define udelay(n) __udelay((unsigned long long) (n)) #define mdelay(n) __udelay((unsigned long long) (n) * 1000) diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 0f53110e1d09..a65229d91c92 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -12,6 +12,7 @@ #include #include #include +#include void __delay(unsigned long loops) { @@ -116,3 +117,17 @@ void udelay_simple(unsigned long long usecs) while (get_clock() < end) cpu_relax(); } + +void __ndelay(unsigned long long nsecs) +{ + u64 end; + + nsecs <<= 9; + do_div(nsecs, 125); + end = get_clock() + nsecs; + if (nsecs & ~0xfffUL) + __udelay(nsecs >> 12); + while (get_clock() < end) + barrier(); +} +EXPORT_SYMBOL(__ndelay); -- cgit v1.2.3 From 99583181cbf2252dd0554eef6f419a6b22cd33ea Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 26 May 2011 09:48:29 +0200 Subject: [S390] mm: handle kernel caused page fault oom situations If e.g. copy_from_user() generates a page fault and the kernel runs into an OOM situation the system might lock up. If the OOM killer sends a SIG_KILL to the current process it can't handle it since it is stuck in a copy_from_user() - page fault loop. Fix this by adding the same fix as other architectures have. E.g. the x86 variant f86268 "x86/mm: Handle mm_fault_error() in kernel space" Signed-off-by: Heiko Carstens --- arch/s390/mm/fault.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 105fa1071435..b57723aee848 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -245,9 +245,12 @@ static noinline void do_fault_error(struct pt_regs *regs, long int_code, do_no_context(regs, int_code, trans_exc_code); break; default: /* fault & VM_FAULT_ERROR */ - if (fault & VM_FAULT_OOM) - pagefault_out_of_memory(); - else if (fault & VM_FAULT_SIGBUS) { + if (fault & VM_FAULT_OOM) { + if (!(regs->psw.mask & PSW_MASK_PSTATE)) + do_no_context(regs, int_code, trans_exc_code); + else + pagefault_out_of_memory(); + } else if (fault & VM_FAULT_SIGBUS) { /* Kernel mode? Handle exceptions or die */ if (!(regs->psw.mask & PSW_MASK_PSTATE)) do_no_context(regs, int_code, trans_exc_code); @@ -429,10 +432,9 @@ int __handle_fault(unsigned long uaddr, unsigned long pgm_int_code, int write) access = write ? VM_WRITE : VM_READ; fault = do_exception(®s, access, uaddr | 2); if (unlikely(fault)) { - if (fault & VM_FAULT_OOM) { - pagefault_out_of_memory(); - fault = 0; - } else if (fault & VM_FAULT_SIGBUS) + if (fault & VM_FAULT_OOM) + return -EFAULT; + else if (fault & VM_FAULT_SIGBUS) do_sigbus(®s, pgm_int_code, uaddr); } return fault ? -EFAULT : 0; -- cgit v1.2.3 From 33ce614029576b8585e271fd7d90746a37114a15 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 26 May 2011 09:48:30 +0200 Subject: [S390] mm: add page fault retry handling s390 arch backend for d065bd81 "mm: retry page fault when blocking on disk transfer". Signed-off-by: Heiko Carstens --- arch/s390/mm/fault.c | 41 ++++++++++++++++++++++++++++------------- 1 file changed, 28 insertions(+), 13 deletions(-) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index b57723aee848..fe103e891e7a 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -280,7 +280,8 @@ static inline int do_exception(struct pt_regs *regs, int access, struct mm_struct *mm; struct vm_area_struct *vma; unsigned long address; - int fault, write; + unsigned int flags; + int fault; if (notify_page_fault(regs)) return 0; @@ -299,6 +300,10 @@ static inline int do_exception(struct pt_regs *regs, int access, address = trans_exc_code & __FAIL_ADDR_MASK; perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + flags = FAULT_FLAG_ALLOW_RETRY; + if (access == VM_WRITE || (trans_exc_code & store_indication) == 0x400) + flags |= FAULT_FLAG_WRITE; +retry: down_read(&mm->mmap_sem); fault = VM_FAULT_BADMAP; @@ -328,21 +333,31 @@ static inline int do_exception(struct pt_regs *regs, int access, * make sure we exit gracefully rather than endlessly redo * the fault. */ - write = (access == VM_WRITE || - (trans_exc_code & store_indication) == 0x400) ? - FAULT_FLAG_WRITE : 0; - fault = handle_mm_fault(mm, vma, address, write); + fault = handle_mm_fault(mm, vma, address, flags); if (unlikely(fault & VM_FAULT_ERROR)) goto out_up; - if (fault & VM_FAULT_MAJOR) { - tsk->maj_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, - regs, address); - } else { - tsk->min_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, - regs, address); + /* + * Major/minor page fault accounting is only done on the + * initial attempt. If we go through a retry, it is extremely + * likely that the page will be found in page cache at that point. + */ + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) { + tsk->maj_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { + tsk->min_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } + if (fault & VM_FAULT_RETRY) { + /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk + * of starvation. */ + flags &= ~FAULT_FLAG_ALLOW_RETRY; + goto retry; + } } /* * The instruction that caused the program check will -- cgit v1.2.3 From 69dbb2f79a5626741a24770719406a4edb2cb84f Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 26 May 2011 09:48:31 +0200 Subject: [S390] mm: add ZONE_DMA to 31-bit config again Add ZONE_DMA to 31-bit config again. The performance gain is minimal and hardly anybody cares anymore about a 31-bit kernel. So add ZONE_DMA again to help with SLAB_CACHE_DMA removal for !CONFIG_ZONE_DMA configurations. Acked-by: David Rientjes Signed-off-by: Heiko Carstens --- arch/s390/Kconfig | 2 +- arch/s390/appldata/appldata_mem.c | 2 -- arch/s390/mm/init.c | 2 -- 3 files changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index ff2d2371b2e9..9fab2aa9c2c8 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -2,7 +2,7 @@ config MMU def_bool y config ZONE_DMA - def_bool y if 64BIT + def_bool y config LOCKDEP_SUPPORT def_bool y diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index e43fe7537031..f7d3dc555bdb 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -92,9 +92,7 @@ static void appldata_get_mem_data(void *data) mem_data->pswpin = ev[PSWPIN]; mem_data->pswpout = ev[PSWPOUT]; mem_data->pgalloc = ev[PGALLOC_NORMAL]; -#ifdef CONFIG_ZONE_DMA mem_data->pgalloc += ev[PGALLOC_DMA]; -#endif mem_data->pgfault = ev[PGFAULT]; mem_data->pgmajfault = ev[PGMAJFAULT]; diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index dfefc2171691..59b663109d90 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -119,9 +119,7 @@ void __init paging_init(void) sparse_memory_present_with_active_regions(MAX_NUMNODES); sparse_init(); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); -#ifdef CONFIG_ZONE_DMA max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS); -#endif max_zone_pfns[ZONE_NORMAL] = max_low_pfn; free_area_init_nodes(max_zone_pfns); fault_init(); -- cgit v1.2.3 From 7b7bf499f79de3f6c85a340c8453a78789523f85 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 19 May 2011 13:21:14 +0100 Subject: ARM: 6913/1: sparsemem: allow pfn_valid to be overridden when using SPARSEMEM In commit eb33575c ("[ARM] Double check memmap is actually valid with a memmap has unexpected holes V2"), a new function, memmap_valid_within, was introduced to mmzone.h so that holes in the memmap which pass pfn_valid in SPARSEMEM configurations can be detected and avoided. The fix to this problem checks that the pfn <-> page linkages are correct by calculating the page for the pfn and then checking that page_to_pfn on that page returns the original pfn. Unfortunately, in SPARSEMEM configurations, this results in reading from the page flags to determine the correct section. Since the memmap here has been freed, junk is read from memory and the check is no longer robust. In the best case, reading from /proc/pagetypeinfo will give you the wrong answer. In the worst case, you get SEGVs, Kernel OOPses and hung CPUs. Furthermore, ioremap implementations that use pfn_valid to disallow the remapping of normal memory will break. This patch allows architectures to provide their own pfn_valid function instead of using the default implementation used by sparsemem. The architecture-specific version is aware of the memmap state and will return false when passed a pfn for a freed page within a valid section. Acked-by: Mel Gorman Acked-by: Catalin Marinas Tested-by: H Hartley Sweeten Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 3 +++ arch/arm/include/asm/page.h | 2 +- arch/arm/mm/init.c | 4 +++- include/linux/mmzone.h | 2 ++ 4 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7275009686e6..5be55d950ab5 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1516,6 +1516,9 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_SELECT_MEMORY_MODEL def_bool ARCH_SPARSEMEM_ENABLE +config HAVE_ARCH_PFN_VALID + def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM + config HIGHMEM bool "High Memory Support" depends on MMU diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index f51a69595f6e..ac75d0848889 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -197,7 +197,7 @@ typedef unsigned long pgprot_t; typedef struct page *pgtable_t; -#ifndef CONFIG_SPARSEMEM +#ifdef CONFIG_HAVE_ARCH_PFN_VALID extern int pfn_valid(unsigned long); #endif diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 3f17ea146f0e..bbc3346e8bcd 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -273,13 +273,15 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, free_area_init_node(0, zone_size, min, zhole_size); } -#ifndef CONFIG_SPARSEMEM +#ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { return memblock_is_memory(pfn << PAGE_SHIFT); } EXPORT_SYMBOL(pfn_valid); +#endif +#ifndef CONFIG_SPARSEMEM static void arm_memory_present(void) { } diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 217bcf6bca77..261f299c9441 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -1056,12 +1056,14 @@ static inline struct mem_section *__pfn_to_section(unsigned long pfn) return __nr_to_section(pfn_to_section_nr(pfn)); } +#ifndef CONFIG_HAVE_ARCH_PFN_VALID static inline int pfn_valid(unsigned long pfn) { if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS) return 0; return valid_section(__nr_to_section(pfn_to_section_nr(pfn))); } +#endif static inline int pfn_present(unsigned long pfn) { -- cgit v1.2.3 From 40f7bfe4f1c2761abeceb3b2b9dc1feec3c47ed9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 19 May 2011 13:22:48 +0100 Subject: ARM: 6914/1: sparsemem: fix highmem detection when using SPARSEMEM sanity_check_meminfo walks over the registered memory banks and attempts to split banks across lowmem and highmem when they would otherwise overlap with the vmalloc space. When SPARSEMEM is used, there are two potential problems that occur when the virtual address of the start of a bank is equal to vmalloc_min. 1.) The end of lowmem is calculated as __pa(vmalloc_min - 1) + 1. In the above scenario, this will give the end address of the previous bank, rather than the actual bank we are interested in. This value is later used as the memblock limit and artificially restricts the total amount of available memory. 2.) The checks to determine whether or not a bank belongs to highmem or not only check if __va(bank->start) is greater or less than vmalloc_min. In the case that it is equal, the bank is incorrectly treated as lowmem, which hoses the vmalloc area. This patch fixes these two problems by checking whether the virtual start address of a bank is >= vmalloc_min and then calculating lowmem_end by finding the virtual end address of the highest lowmem bank. Acked-by: Catalin Marinas Reviewed-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/mmu.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 08a92368d9d3..9d9e736c2b4f 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -763,15 +763,12 @@ static void __init sanity_check_meminfo(void) { int i, j, highmem = 0; - lowmem_limit = __pa(vmalloc_min - 1) + 1; - memblock_set_current_limit(lowmem_limit); - for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM - if (__va(bank->start) > vmalloc_min || + if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) highmem = 1; @@ -829,6 +826,9 @@ static void __init sanity_check_meminfo(void) bank->size = newsize; } #endif + if (!bank->highmem && bank->start + bank->size > lowmem_limit) + lowmem_limit = bank->start + bank->size; + j++; } #ifdef CONFIG_HIGHMEM @@ -852,6 +852,7 @@ static void __init sanity_check_meminfo(void) } #endif meminfo.nr_banks = j; + memblock_set_current_limit(lowmem_limit); } static inline void prepare_page_table(void) -- cgit v1.2.3 From dc2eb928a1bcf6a48f40c1f2ff21b66bdbf91a3c Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Mon, 23 May 2011 12:22:10 +0100 Subject: ARM: 6938/1: fiq: Refactor {get,set}_fiq_regs() for Thumb-2 * To remove the risk of inconvenient register allocation decisions by the compiler, these functions are separated out as pure assembler. * The apcs frame manipulation code is not applicable for Thumb-2 (and also not easily compatible). Since it's not essential to have a full frame on these leaf assembler functions, the frame manipulation is removed, in the interests of simplicity. * Split up ldm/stm instructions to be compatible with Thumb-2, as well as avoiding instruction forms deprecated on >= ARMv7. Signed-off-by: Dave Martin Reviewed-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/fiq.h | 16 +++++++++++++-- arch/arm/kernel/Makefile | 2 +- arch/arm/kernel/fiq.c | 45 ++---------------------------------------- arch/arm/kernel/fiqasm.S | 49 ++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 66 insertions(+), 46 deletions(-) create mode 100644 arch/arm/kernel/fiqasm.S diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h index 2242ce22ec6c..45bb3eeeab7c 100644 --- a/arch/arm/include/asm/fiq.h +++ b/arch/arm/include/asm/fiq.h @@ -29,9 +29,21 @@ struct fiq_handler { extern int claim_fiq(struct fiq_handler *f); extern void release_fiq(struct fiq_handler *f); extern void set_fiq_handler(void *start, unsigned int length); -extern void set_fiq_regs(struct pt_regs *regs); -extern void get_fiq_regs(struct pt_regs *regs); extern void enable_fiq(int fiq); extern void disable_fiq(int fiq); +/* helpers defined in fiqasm.S: */ +extern void __set_fiq_regs(unsigned long const *regs); +extern void __get_fiq_regs(unsigned long *regs); + +static inline void set_fiq_regs(struct pt_regs const *regs) +{ + __set_fiq_regs(®s->ARM_r8); +} + +static inline void get_fiq_regs(struct pt_regs *regs) +{ + __get_fiq_regs(®s->ARM_r8); +} + #endif diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 8d95446150a3..01c0292eea8b 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o -obj-$(CONFIG_FIQ) += fiq.o +obj-$(CONFIG_FIQ) += fiq.o fiqasm.o obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index e72dc34eea1c..4c164ece5891 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -89,47 +89,6 @@ void set_fiq_handler(void *start, unsigned int length) flush_icache_range(0x1c, 0x1c + length); } -/* - * Taking an interrupt in FIQ mode is death, so both these functions - * disable irqs for the duration. Note - these functions are almost - * entirely coded in assembly. - */ -void __naked set_fiq_regs(struct pt_regs *regs) -{ - register unsigned long tmp; - asm volatile ( - "mov ip, sp\n\ - stmfd sp!, {fp, ip, lr, pc}\n\ - sub fp, ip, #4\n\ - mrs %0, cpsr\n\ - msr cpsr_c, %2 @ select FIQ mode\n\ - mov r0, r0\n\ - ldmia %1, {r8 - r14}\n\ - msr cpsr_c, %0 @ return to SVC mode\n\ - mov r0, r0\n\ - ldmfd sp, {fp, sp, pc}" - : "=&r" (tmp) - : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); -} - -void __naked get_fiq_regs(struct pt_regs *regs) -{ - register unsigned long tmp; - asm volatile ( - "mov ip, sp\n\ - stmfd sp!, {fp, ip, lr, pc}\n\ - sub fp, ip, #4\n\ - mrs %0, cpsr\n\ - msr cpsr_c, %2 @ select FIQ mode\n\ - mov r0, r0\n\ - stmia %1, {r8 - r14}\n\ - msr cpsr_c, %0 @ return to SVC mode\n\ - mov r0, r0\n\ - ldmfd sp, {fp, sp, pc}" - : "=&r" (tmp) - : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); -} - int claim_fiq(struct fiq_handler *f) { int ret = 0; @@ -174,8 +133,8 @@ void disable_fiq(int fiq) } EXPORT_SYMBOL(set_fiq_handler); -EXPORT_SYMBOL(set_fiq_regs); -EXPORT_SYMBOL(get_fiq_regs); +EXPORT_SYMBOL(__set_fiq_regs); /* defined in fiqasm.S */ +EXPORT_SYMBOL(__get_fiq_regs); /* defined in fiqasm.S */ EXPORT_SYMBOL(claim_fiq); EXPORT_SYMBOL(release_fiq); EXPORT_SYMBOL(enable_fiq); diff --git a/arch/arm/kernel/fiqasm.S b/arch/arm/kernel/fiqasm.S new file mode 100644 index 000000000000..207f9d652010 --- /dev/null +++ b/arch/arm/kernel/fiqasm.S @@ -0,0 +1,49 @@ +/* + * linux/arch/arm/kernel/fiqasm.S + * + * Derived from code originally in linux/arch/arm/kernel/fiq.c: + * + * Copyright (C) 1998 Russell King + * Copyright (C) 1998, 1999 Phil Blundell + * Copyright (C) 2011, Linaro Limited + * + * FIQ support written by Philip Blundell , 1998. + * + * FIQ support re-written by Russell King to be more generic + * + * v7/Thumb-2 compatibility modifications by Linaro Limited, 2011. + */ + +#include +#include + +/* + * Taking an interrupt in FIQ mode is death, so both these functions + * disable irqs for the duration. + */ + +ENTRY(__set_fiq_regs) + mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE + mrs r1, cpsr + msr cpsr_c, r2 @ select FIQ mode + mov r0, r0 @ avoid hazard prior to ARMv4 + ldmia r0!, {r8 - r12} + ldr sp, [r0], #4 + ldr lr, [r0] + msr cpsr_c, r1 @ return to SVC mode + mov r0, r0 @ avoid hazard prior to ARMv4 + mov pc, lr +ENDPROC(__set_fiq_regs) + +ENTRY(__get_fiq_regs) + mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE + mrs r1, cpsr + msr cpsr_c, r2 @ select FIQ mode + mov r0, r0 @ avoid hazard prior to ARMv4 + stmia r0!, {r8 - r12} + str sp, [r0], #4 + str lr, [r0] + msr cpsr_c, r1 @ return to SVC mode + mov r0, r0 @ avoid hazard prior to ARMv4 + mov pc, lr +ENDPROC(__get_fiq_regs) -- cgit v1.2.3 From 2846d84ffa4408c9810fabad74cb7aec410352fc Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Tue, 24 May 2011 12:11:48 +0100 Subject: ARM: 6940/1: fiq: Briefly document driver responsibilities for suspend/resume Drivers which make use of the FIQ interrupt may require the state of the FIQ mode registers to be preserved across suspend/resume. Because the FIQ mode registers are not saved and restored automatically by the kernel, driver authors will need to do the appropriate save/restore in their own driver suspend/resume handlers. Implementing global automatic save/restore of the FIQ state does not appear appropriate, since this by itself is not sufficient for FIQ-based drivers to function correctly across suspend/resume in any case. This patch adds a brief explanatory note to fiq.h documenting the requirement placed on driver authors. Signed-off-by: Dave Martin Signed-off-by: Russell King --- arch/arm/include/asm/fiq.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h index 45bb3eeeab7c..d493d0b742a1 100644 --- a/arch/arm/include/asm/fiq.h +++ b/arch/arm/include/asm/fiq.h @@ -4,6 +4,13 @@ * Support for FIQ on ARM architectures. * Written by Philip Blundell , 1998 * Re-written by Russell King + * + * NOTE: The FIQ mode registers are not magically preserved across + * suspend/resume. + * + * Drivers which require these registers to be preserved across power + * management operations must implement appropriate suspend/resume handlers to + * save and restore them. */ #ifndef __ASM_FIQ_H -- cgit v1.2.3 From 5de5a4dd872b2ca9fe8be380be5c1a78ce83b88c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 24 Mar 2011 16:11:35 +0100 Subject: ARM: 6827/1: mach-netx: delete hardcoded periphid The periphid of the AMBA CLCD controller is hardcoded to a value that the CLCD driver does not even support. Cc: Sascha Hauer Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-netx/fb.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index 5b84bcd30271..b9913234bbf6 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -103,7 +103,6 @@ static struct amba_device fb_device = { .flags = IORESOURCE_MEM, }, .irq = { NETX_IRQ_LCD, NO_IRQ }, - .periphid = 0x10112400, }; int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) -- cgit v1.2.3 From e536fbe18f803b6bf9f2ea2d54d918e2b09724d8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 24 Mar 2011 16:12:07 +0100 Subject: ARM: 6828/1: mach-ux500: delete SSP PrimeCell ID This is redundant. The correct ID number is right there in the hardware anyway. We will introduce a mechanism later to hard-code this for deviant cells. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-ux500/devices-db8500.h | 2 +- arch/arm/mach-ux500/include/mach/hardware.h | 3 --- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 9cc6f8f5d3e6..e341ad083365 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -25,7 +25,7 @@ static inline struct amba_device * db8500_add_ssp(const char *name, resource_size_t base, int irq, struct pl022_ssp_controller *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, SSP_PER_ID); + return dbx500_add_amba_device(name, base, irq, pdata, 0); } diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 2c6f71049f2e..470ac52663d6 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -29,9 +29,6 @@ #include #include -/* ST-Ericsson modified pl022 id */ -#define SSP_PER_ID 0x01080022 - #ifndef __ASSEMBLY__ #include -- cgit v1.2.3 From 97ceed1fc29b601e64af98fd785e25fec4383b12 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 24 Mar 2011 16:12:40 +0100 Subject: ARM: 6829/1: amba: make hardcoded periphid override hardware This makes a hardcoded periphid from the platform override any magic number found in the hardware. This shall henceforth be used when the information found in the hardware is either missing, i.e. not encoding the CID with the magic cookie 0xb105f00d, or incorrect such that the revision number should have been bumped in hardware, but the silicon designer has failed to do so. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- drivers/amba/bus.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c index 7025593a58c8..d74926e0939e 100644 --- a/drivers/amba/bus.c +++ b/drivers/amba/bus.c @@ -603,6 +603,10 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) if (ret) goto err_out; + /* Hard-coded primecell ID instead of plug-n-play */ + if (dev->periphid != 0) + goto skip_probe; + /* * Dynamically calculate the size of the resource * and use this for iomap @@ -643,6 +647,7 @@ int amba_device_register(struct amba_device *dev, struct resource *parent) if (ret) goto err_release; + skip_probe: ret = device_add(&dev->dev); if (ret) goto err_release; -- cgit v1.2.3 From 729303191ef4bd5df4c5e9ffca62268758928b2c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 24 Mar 2011 16:13:13 +0100 Subject: ARM: 6830/1: mach-ux500: force PrimeCell revisions The DB8500v2 and DB5500 has a fifth version of the "PL023" and PL180 blocks. However the ASIC engineers have forgot to bump the revision in the PrimeCell peripheral ID registers. Since the platform is aware of the actual silicon revision we need to hard-code the periphid from the platform, bumping the subrevision field to 1. Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-ux500/board-mop500-sdi.c | 16 ++++++++++++---- arch/arm/mach-ux500/devices-common.h | 10 ++++++---- arch/arm/mach-ux500/devices-db5500.h | 28 +++++++++++++++++++--------- arch/arm/mach-ux500/devices-db8500.h | 32 ++++++++++++++++---------------- 4 files changed, 53 insertions(+), 33 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index bf0b02414e5b..7c6cb4fa47a9 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -99,8 +99,11 @@ static void sdi0_configure(void) gpio_direction_output(sdi0_vsel, 0); gpio_direction_output(sdi0_en, 1); - /* Add the device */ - db8500_add_sdi0(&mop500_sdi0_data); + /* Add the device, force v2 to subrevision 1 */ + if (cpu_is_u8500v2()) + db8500_add_sdi0(&mop500_sdi0_data, 0x10480180); + else + db8500_add_sdi0(&mop500_sdi0_data, 0); } void mop500_sdi_tc35892_init(void) @@ -188,13 +191,18 @@ static struct mmci_platform_data mop500_sdi4_data = { void __init mop500_sdi_init(void) { + u32 periphid = 0; + + /* v2 has a new version of this block that need to be forced */ + if (cpu_is_u8500v2()) + periphid = 0x10480180; /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ if (!cpu_is_u8500v10()) mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - db8500_add_sdi2(&mop500_sdi2_data); + db8500_add_sdi2(&mop500_sdi2_data, periphid); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data); + db8500_add_sdi4(&mop500_sdi4_data, periphid); if (machine_is_hrefv60()) { mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index c719b5a1d913..7825705033bf 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -28,18 +28,20 @@ dbx500_add_msp_spi(const char *name, resource_size_t base, int irq, static inline struct amba_device * dbx500_add_spi(const char *name, resource_size_t base, int irq, - struct spi_master_cntlr *pdata) + struct spi_master_cntlr *pdata, + u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(name, base, irq, pdata, periphid); } struct mmci_platform_data; static inline struct amba_device * dbx500_add_sdi(const char *name, resource_size_t base, int irq, - struct mmci_platform_data *pdata) + struct mmci_platform_data *pdata, + u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(name, base, irq, pdata, periphid); } struct amba_pl011_data; diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h index 94627f7783b0..0c4bccd02b90 100644 --- a/arch/arm/mach-ux500/devices-db5500.h +++ b/arch/arm/mach-ux500/devices-db5500.h @@ -38,24 +38,34 @@ ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) #define db5500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata) + dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \ + 0x10480180) #define db5500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata) + dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \ + 0x10480180) #define db5500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata) + dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \ + 0x10480180) #define db5500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata) + dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \ + 0x10480180) #define db5500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata) + dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \ + 0x10480180) +/* This one has a bad peripheral ID in the U5500 silicon */ #define db5500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata) + dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \ + 0x10080023) #define db5500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata) + dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \ + 0x10080023) #define db5500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata) + dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \ + 0x10080023) #define db5500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata) + dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \ + 0x10080023) #define db5500_add_uart0(plat) \ dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat) diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index e341ad083365..cbd4a9ae8109 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -64,18 +64,18 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, #define db8500_add_usb(rx_cfg, tx_cfg) \ ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) -#define db8500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata) -#define db8500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata) -#define db8500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata) -#define db8500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata) -#define db8500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata) -#define db8500_add_sdi5(pdata) \ - dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata) +#define db8500_add_sdi0(pdata, pid) \ + dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid) +#define db8500_add_sdi1(pdata, pid) \ + dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid) +#define db8500_add_sdi2(pdata, pid) \ + dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid) +#define db8500_add_sdi3(pdata, pid) \ + dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid) +#define db8500_add_sdi4(pdata, pid) \ + dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid) +#define db8500_add_sdi5(pdata, pid) \ + dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid) #define db8500_add_ssp0(pdata) \ db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata) @@ -83,13 +83,13 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata) #define db8500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata) + dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0) #define db8500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata) + dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0) #define db8500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata) + dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0) #define db8500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata) + dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0) #define db8500_add_uart0(pdata) \ dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata) -- cgit v1.2.3 From 1784b157c89cd2b5e6a3840abfdab6ed51f31d86 Mon Sep 17 00:00:00 2001 From: Philippe Langlais Date: Fri, 25 Mar 2011 08:51:52 +0100 Subject: ARM: 6832/1: mmci: support for ST-Ericsson db8500v2 ST-Ericsson modified ARM PrimeCell PL180 block has not got an updated corresponding amba-id, althought the IP block has changed in db8500v2. The change was done to the datactrl register. Using the overrided subversion ID, account for this. Signed-off-by: Philippe Langlais Signed-off-by: Linus Walleij Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 25 +++++++++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 4941e06fe2e1..5da5bea0f9f0 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -51,6 +51,7 @@ static unsigned int fmax = 515633; * is asserted (likewise for RX) * @sdio: variant supports SDIO * @st_clkdiv: true if using a ST-specific clock divider algorithm + * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register */ struct variant_data { unsigned int clkreg; @@ -60,6 +61,7 @@ struct variant_data { unsigned int fifohalfsize; bool sdio; bool st_clkdiv; + bool blksz_datactrl16; }; static struct variant_data variant_arm = { @@ -92,6 +94,17 @@ static struct variant_data variant_ux500 = { .st_clkdiv = true, }; +static struct variant_data variant_ux500v2 = { + .fifosize = 30 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_ST_UX500_HWFCEN, + .datalength_bits = 24, + .sdio = true, + .st_clkdiv = true, + .blksz_datactrl16 = true, +}; + /* * This must be called with host->lock held */ @@ -465,7 +478,10 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) blksz_bits = ffs(data->blksz) - 1; BUG_ON(1 << blksz_bits != data->blksz); - datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; + if (variant->blksz_datactrl16) + datactrl = MCI_DPSM_ENABLE | (data->blksz << 16); + else + datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; if (data->flags & MMC_DATA_READ) datactrl |= MCI_DPSM_DIRECTION; @@ -1311,9 +1327,14 @@ static struct amba_id mmci_ids[] = { }, { .id = 0x00480180, - .mask = 0x00ffffff, + .mask = 0xf0ffffff, .data = &variant_ux500, }, + { + .id = 0x10480180, + .mask = 0xf0ffffff, + .data = &variant_ux500v2, + }, { 0, 0 }, }; -- cgit v1.2.3 From fbb9e0b6e7d534b5d9e3c3eddb68b62d26ddb731 Mon Sep 17 00:00:00 2001 From: Jeffrey Ohlstein Date: Mon, 4 Apr 2011 21:08:25 +0100 Subject: ARM: 6863/1: allow hotplug on msm Hotplug support was added in 9f1890a (msm: hotplug: support cpu hotplug on msm, 2010-12-02) Signed-off-by: Jeff Ohlstein Signed-off-by: Russell King --- arch/arm/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5be55d950ab5..abbd829f5419 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1399,7 +1399,6 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL - depends on !ARCH_MSM help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. -- cgit v1.2.3 From a85fab1c795c88675ba3e23e68d821c57e9920fc Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 26 May 2011 12:12:13 +0100 Subject: ARM: add sendmmsg syscall Commit 228e548e (net: Add sendmmsg socket system call) added the new sendmmsg syscall. Add this to the syscall table for ARM. Signed-off-by: Russell King --- arch/arm/include/asm/unistd.h | 1 + arch/arm/kernel/calls.S | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 87dbe3e21970..3de689aa6f68 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -400,6 +400,7 @@ #define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) #define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) #define __NR_syncfs (__NR_SYSCALL_BASE+373) +#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 7fbf28c35bb2..24cdac3ce2e3 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -383,6 +383,7 @@ CALL(sys_open_by_handle_at) CALL(sys_clock_adjtime) CALL(sys_syncfs) + CALL(sys_sendmmsg) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit v1.2.3 From a248b13b21ae00b97638b4f435c8df3075808b5d Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 26 May 2011 11:20:19 +0100 Subject: ARM: 6941/1: cache: ensure MVA is cacheline aligned in flush_kern_dcache_area The v6 and v7 implementations of flush_kern_dcache_area do not align the passed MVA to the size of a cacheline in the data cache. If a misaligned address is used, only a subset of the requested area will be flushed. This has been observed to cause failures in SMP boot where the secondary_data initialised by the primary CPU is not cacheline aligned, causing the secondary CPUs to read incorrect values for their pgd and stack pointers. This patch ensures that the base address is cacheline aligned before flushing the d-cache. Cc: Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/cache-v6.S | 1 + arch/arm/mm/cache-v7.S | 2 ++ 2 files changed, 3 insertions(+) diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index c96fa1b3f49f..73b4a8b66a57 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -176,6 +176,7 @@ ENDPROC(v6_coherent_kern_range) */ ENTRY(v6_flush_kern_dcache_area) add r1, r0, r1 + bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index dc18d81ef8ce..d32f02b61866 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -221,6 +221,8 @@ ENDPROC(v7_coherent_user_range) ENTRY(v7_flush_kern_dcache_area) dcache_line_size r2, r3 add r1, r0, r1 + sub r3, r2, #1 + bic r0, r0, r3 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 -- cgit v1.2.3 From d427958a46af24f75d0017c45eadd172273bbf33 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 26 May 2011 11:22:44 +0100 Subject: ARM: 6942/1: mm: make TTBR1 always point to swapper_pg_dir on ARMv6/7 This patch makes TTBR1 point to swapper_pg_dir so that global, kernel mappings can be used exclusively on v6 and v7 cores where they are needed. Signed-off-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/smp.h | 1 + arch/arm/kernel/head.S | 7 +++++-- arch/arm/kernel/smp.c | 1 + arch/arm/mm/proc-v6.S | 4 +++- arch/arm/mm/proc-v7.S | 4 +++- 5 files changed, 13 insertions(+), 4 deletions(-) diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index d2b514fd76f4..e42d96a45d3e 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -70,6 +70,7 @@ extern void platform_smp_prepare_cpus(unsigned int); */ struct secondary_data { unsigned long pgdir; + unsigned long swapper_pg_dir; void *stack; }; extern struct secondary_data secondary_data; diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c9173cfbbc74..8224b1d5f2f2 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -113,6 +113,7 @@ ENTRY(stext) ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled adr lr, BSYM(1f) @ return (PIC) address + mov r8, r4 @ set TTBR1 to swapper_pg_dir ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) THUMB( mov pc, r12 ) @@ -302,8 +303,10 @@ ENTRY(secondary_startup) */ adr r4, __secondary_data ldmia r4, {r5, r7, r12} @ address to jump to after - sub r4, r4, r5 @ mmu has been enabled - ldr r4, [r7, r4] @ get secondary_data.pgdir + sub lr, r4, r5 @ mmu has been enabled + ldr r4, [r7, lr] @ get secondary_data.pgdir + add r7, r7, #4 + ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir adr lr, BSYM(__enable_mmu) @ return address mov r13, r12 @ __secondary_switched address ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index d439a8f4c078..344e52b16c8c 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -105,6 +105,7 @@ int __cpuinit __cpu_up(unsigned int cpu) */ secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; secondary_data.pgdir = virt_to_phys(pgd); + secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir); __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data)); outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1)); diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index ab17cc0d3fa7..1d2b8451bf25 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -213,7 +213,9 @@ __v6_setup: mcr p15, 0, r0, c2, c0, 2 @ TTB control register ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) + ALT_UP(orr r8, r8, #TTB_FLAGS_UP) + mcr p15, 0, r8, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ adr r5, v6_crval ldmia r5, {r5, r6} diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index babfba09c89f..3c3867850a30 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -368,7 +368,9 @@ __v7_setup: mcr p15, 0, r10, c2, c0, 2 @ TTB control register ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) + ALT_UP(orr r8, r8, #TTB_FLAGS_UP) + mcr p15, 0, r8, c2, c0, 1 @ load TTB1 ldr r5, =PRRR @ PRRR ldr r6, =NMRR @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR -- cgit v1.2.3 From 52af9c6cd863fe37d1103035ec7ee22ac1296458 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 26 May 2011 11:23:43 +0100 Subject: ARM: 6943/1: mm: use TTBR1 instead of reserved context ID On ARMv7 CPUs that cache first level page table entries (like the Cortex-A15), using a reserved ASID while changing the TTBR or flushing the TLB is unsafe. This is because the CPU may cache the first level entry as the result of a speculative memory access while the reserved ASID is assigned. After the process owning the page tables dies, the memory will be reallocated and may be written with junk values which can be interpreted as global, valid PTEs by the processor. This will result in the TLB being populated with bogus global entries. This patch avoids the use of a reserved context ID in the v7 switch_mm and ASID rollover code by temporarily using the swapper_pg_dir pointed at by TTBR1, which contains only global entries that are not tagged with ASIDs. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/context.c | 11 ++++++----- arch/arm/mm/proc-v7.S | 10 ++++------ 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b0ee9ba3cfab..0d86298c7279 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -24,9 +24,7 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm); /* * We fork()ed a process, and we need a new context for the child - * to run in. We reserve version 0 for initial tasks so we will - * always allocate an ASID. The ASID 0 is reserved for the TTBR - * register changing sequence. + * to run in. */ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -36,8 +34,11 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) static void flush_context(void) { - /* set the reserved ASID before flushing the TLB */ - asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0)); + u32 ttb; + /* Copy TTBR1 into TTBR0 */ + asm volatile("mrc p15, 0, %0, c2, c0, 1\n" + "mcr p15, 0, %0, c2, c0, 0" + : "=r" (ttb)); isb(); local_flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 3c3867850a30..b3b566ec83d3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -108,18 +108,16 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif -#ifdef CONFIG_ARM_ERRATA_754322 - dsb -#endif - mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID - isb -1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + mrc p15, 0, r2, c2, c0, 1 @ load TTB 1 + mcr p15, 0, r2, c2, c0, 0 @ into TTB 0 isb #ifdef CONFIG_ARM_ERRATA_754322 dsb #endif mcr p15, 0, r1, c13, c0, 1 @ set context ID isb + mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + isb #endif mov pc, lr ENDPROC(cpu_v7_switch_mm) -- cgit v1.2.3 From 45b95235b0ac86cef2ad4480b0618b8778847479 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 26 May 2011 11:24:25 +0100 Subject: ARM: 6944/1: mm: allow ASID 0 to be allocated to tasks Now that ASID 0 is no longer used as a reserved value, allow it to be allocated to tasks. Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/context.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 0d86298c7279..8bfae964b133 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -94,7 +94,7 @@ static void reset_context(void *info) return; smp_rmb(); - asid = cpu_last_asid + cpu + 1; + asid = cpu_last_asid + cpu; flush_context(); set_mm_context(mm, asid); @@ -144,13 +144,13 @@ void __new_context(struct mm_struct *mm) * to start a new version and flush the TLB. */ if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id() + 1; + asid = cpu_last_asid + smp_processor_id(); flush_context(); #ifdef CONFIG_SMP smp_wmb(); smp_call_function(reset_context, NULL, 1); #endif - cpu_last_asid += NR_CPUS; + cpu_last_asid += NR_CPUS - 1; } set_mm_context(mm, asid); -- cgit v1.2.3 From ea7659fb2b876337aee719d9d5ddb05531dfb334 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 26 May 2011 10:21:05 +0200 Subject: perf: Remove duplicate headers Signed-off-by: Jesper Juhl Cc: Tom Zanussi Cc: Arnaldo Carvalho de Melo Cc: trivial@kernel.org Cc: Peter Zijlstra Cc: Paul Mackerras Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1105261011290.17400@swampdragon.chaosbits.net Signed-off-by: Ingo Molnar --- tools/perf/builtin-annotate.c | 2 -- tools/perf/builtin-script.c | 1 - 2 files changed, 3 deletions(-) diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c index e18eb7ed30ae..7b139e1e7e86 100644 --- a/tools/perf/builtin-annotate.c +++ b/tools/perf/builtin-annotate.c @@ -7,8 +7,6 @@ */ #include "builtin.h" -#include "util/util.h" - #include "util/util.h" #include "util/color.h" #include diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c index 974f6d3f4e53..22747de7234b 100644 --- a/tools/perf/builtin-script.c +++ b/tools/perf/builtin-script.c @@ -10,7 +10,6 @@ #include "util/symbol.h" #include "util/thread.h" #include "util/trace-event.h" -#include "util/parse-options.h" #include "util/util.h" #include "util/evlist.h" #include "util/evsel.h" -- cgit v1.2.3 From b80ef10e84d85a06bcd0b3a24a752ec32d0e0e40 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Thu, 26 May 2011 17:12:12 +0900 Subject: x86: Move do_page_fault()'s error path under unlikely() Ingo suggested SIGKILL check should be moved into slowpath function. This will reduce the page fault fastpath impact of this recent commit: 37b23e0525d3: x86,mm: make pagefault killable Suggested-by: Ingo Molnar Signed-off-by: KOSAKI Motohiro Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: minchan.kim@gmail.com Cc: willy@linux.intel.com Cc: Andrew Morton Cc: Linus Torvalds Link: http://lkml.kernel.org/r/4DDE0B5C.9050907@jp.fujitsu.com Signed-off-by: Ingo Molnar --- arch/x86/mm/fault.c | 35 ++++++++++++++++++++--------------- 1 file changed, 20 insertions(+), 15 deletions(-) diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index f7a2a054a3c0..2dbf6bf4c7e5 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -823,16 +823,30 @@ do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address, force_sig_info_fault(SIGBUS, code, address, tsk, fault); } -static noinline void +static noinline int mm_fault_error(struct pt_regs *regs, unsigned long error_code, unsigned long address, unsigned int fault) { + /* + * Pagefault was interrupted by SIGKILL. We have no reason to + * continue pagefault. + */ + if (fatal_signal_pending(current)) { + if (!(fault & VM_FAULT_RETRY)) + up_read(¤t->mm->mmap_sem); + if (!(error_code & PF_USER)) + no_context(regs, error_code, address); + return 1; + } + if (!(fault & VM_FAULT_ERROR)) + return 0; + if (fault & VM_FAULT_OOM) { /* Kernel mode? Handle exceptions or die: */ if (!(error_code & PF_USER)) { up_read(¤t->mm->mmap_sem); no_context(regs, error_code, address); - return; + return 1; } out_of_memory(regs, error_code, address); @@ -843,6 +857,7 @@ mm_fault_error(struct pt_regs *regs, unsigned long error_code, else BUG(); } + return 1; } static int spurious_fault_check(unsigned long error_code, pte_t *pte) @@ -1133,19 +1148,9 @@ good_area: */ fault = handle_mm_fault(mm, vma, address, flags); - if (unlikely(fault & VM_FAULT_ERROR)) { - mm_fault_error(regs, error_code, address, fault); - return; - } - - /* - * Pagefault was interrupted by SIGKILL. We have no reason to - * continue pagefault. - */ - if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) { - if (!(error_code & PF_USER)) - no_context(regs, error_code, address); - return; + if (unlikely(fault & (VM_FAULT_RETRY|VM_FAULT_ERROR))) { + if (mm_fault_error(regs, error_code, address, fault)) + return; } /* -- cgit v1.2.3 From 5c699d7d3f94ee1dd934edea889b32f8279a4e65 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 26 May 2011 11:49:16 +0300 Subject: HID: hiddev: fix use after free in hiddev_release There are a couple use after free bugs here. Signed-off-by: Dan Carpenter [jkosina@suse.cz: removed already fixed hunk] Signed-off-by: Jiri Kosina --- drivers/hid/usbhid/hiddev.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/hid/usbhid/hiddev.c b/drivers/hid/usbhid/hiddev.c index 4985f485932f..7c1188b53c3e 100644 --- a/drivers/hid/usbhid/hiddev.c +++ b/drivers/hid/usbhid/hiddev.c @@ -248,12 +248,15 @@ static int hiddev_release(struct inode * inode, struct file * file) usbhid_close(list->hiddev->hid); usbhid_put_power(list->hiddev->hid); } else { + mutex_unlock(&list->hiddev->existancelock); kfree(list->hiddev); + kfree(list); + return 0; } } - kfree(list); mutex_unlock(&list->hiddev->existancelock); + kfree(list); return 0; } -- cgit v1.2.3 From 0b6267376d1113bf8e09ae655919e6f0bbe90d01 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 26 May 2011 14:10:44 +0200 Subject: ALSA: hda - Use snd_printd() in snd_hda_parse_pin_def_config() Fixed the wrong usage of snd_printdd() for debug prints of input entries. It should be snd_printd() like others. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_codec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 8edd998509f7..45b4a8d70e08 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -4719,7 +4719,7 @@ int snd_hda_parse_pin_def_config(struct hda_codec *codec, cfg->dig_out_pins[0], cfg->dig_out_pins[1]); snd_printd(" inputs:"); for (i = 0; i < cfg->num_inputs; i++) { - snd_printdd(" %s=0x%x", + snd_printd(" %s=0x%x", hda_get_autocfg_input_label(codec, cfg, i), cfg->inputs[i].pin); } -- cgit v1.2.3 From 9477c58e3308f54a108a5d1eb9621830b329b0ca Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 May 2011 09:11:37 +0200 Subject: ALSA: hda - Reorganize controller quriks with bit flags Introduce bit-flags indicating the necessary controller quirks, and set them in pci driver_data field. This simplifies the checks in the driver code and avoids the pci-id lookup in different places. Also, this patch adds the PCI ID entry for AMD Hudson. AMD Hudson requires a similar workaround like ATI SB while other generic ATI and AMD controllers don't need but some ATI-HDMI quirks. So, we need a different entry for Hudson. Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 206 ++++++++++++++++++++++++++++------------------ 1 file changed, 125 insertions(+), 81 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 43a036716d25..348705666f99 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -391,6 +391,7 @@ struct azx { /* chip type specific */ int driver_type; + unsigned int driver_caps; int playback_streams; int playback_index_offset; int capture_streams; @@ -464,6 +465,34 @@ enum { AZX_NUM_DRIVERS, /* keep this as last entry */ }; +/* driver quirks (capabilities) */ +/* bits 0-7 are used for indicating driver type */ +#define AZX_DCAPS_NO_TCSEL (1 << 8) /* No Intel TCSEL bit */ +#define AZX_DCAPS_NO_MSI (1 << 9) /* No MSI support */ +#define AZX_DCAPS_ATI_SNOOP (1 << 10) /* ATI snoop enable */ +#define AZX_DCAPS_NVIDIA_SNOOP (1 << 11) /* Nvidia snoop enable */ +#define AZX_DCAPS_SCH_SNOOP (1 << 12) /* SCH/PCH snoop enable */ +#define AZX_DCAPS_RIRB_DELAY (1 << 13) /* Long delay in read loop */ +#define AZX_DCAPS_RIRB_PRE_DELAY (1 << 14) /* Put a delay before read */ +#define AZX_DCAPS_CTX_WORKAROUND (1 << 15) /* X-Fi workaround */ +#define AZX_DCAPS_POSFIX_LPIB (1 << 16) /* Use LPIB as default */ +#define AZX_DCAPS_POSFIX_VIA (1 << 17) /* Use VIACOMBO as default */ +#define AZX_DCAPS_NO_64BIT (1 << 18) /* No 64bit address */ +#define AZX_DCAPS_SYNC_WRITE (1 << 19) /* sync each cmd write */ + +/* quirks for ATI SB / AMD Hudson */ +#define AZX_DCAPS_PRESET_ATI_SB \ + (AZX_DCAPS_ATI_SNOOP | AZX_DCAPS_NO_TCSEL | \ + AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_POSFIX_LPIB) + +/* quirks for ATI/AMD HDMI */ +#define AZX_DCAPS_PRESET_ATI_HDMI \ + (AZX_DCAPS_NO_TCSEL | AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_POSFIX_LPIB) + +/* quirks for Nvidia */ +#define AZX_DCAPS_PRESET_NVIDIA \ + (AZX_DCAPS_NVIDIA_SNOOP | AZX_DCAPS_RIRB_DELAY | AZX_DCAPS_NO_MSI) + static char *driver_short_names[] __devinitdata = { [AZX_DRIVER_ICH] = "HDA Intel", [AZX_DRIVER_PCH] = "HDA Intel PCH", @@ -566,7 +595,7 @@ static void azx_init_cmd_io(struct azx *chip) /* reset the rirb hw write pointer */ azx_writew(chip, RIRBWP, ICH6_RIRBWP_RST); /* set N=1, get RIRB response interrupt for new entry */ - if (chip->driver_type == AZX_DRIVER_CTX) + if (chip->driver_caps & AZX_DCAPS_CTX_WORKAROUND) azx_writew(chip, RINTCNT, 0xc0); else azx_writew(chip, RINTCNT, 1); @@ -1056,19 +1085,24 @@ static void azx_init_pci(struct azx *chip) * codecs. * The PCI register TCSEL is defined in the Intel manuals. */ - if (chip->driver_type != AZX_DRIVER_ATI && - chip->driver_type != AZX_DRIVER_ATIHDMI) + if (chip->driver_caps & AZX_DCAPS_NO_TCSEL) { + snd_printdd(SFX "Clearing TCSEL\n"); update_pci_byte(chip->pci, ICH6_PCIREG_TCSEL, 0x07, 0); + } - switch (chip->driver_type) { - case AZX_DRIVER_ATI: - /* For ATI SB450 azalia HD audio, we need to enable snoop */ + /* For ATI SB450/600/700/800/900 and AMD Hudson azalia HD audio, + * we need to enable snoop. + */ + if (chip->driver_caps & AZX_DCAPS_ATI_SNOOP) { + snd_printdd(SFX "Enabling ATI snoop\n"); update_pci_byte(chip->pci, ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, 0x07, ATI_SB450_HDAUDIO_ENABLE_SNOOP); - break; - case AZX_DRIVER_NVIDIA: - /* For NVIDIA HDA, enable snoop */ + } + + /* For NVIDIA HDA, enable snoop */ + if (chip->driver_caps & AZX_DCAPS_NVIDIA_SNOOP) { + snd_printdd(SFX "Enabling Nvidia snoop\n"); update_pci_byte(chip->pci, NVIDIA_HDA_TRANSREG_ADDR, 0x0f, NVIDIA_HDA_ENABLE_COHBITS); @@ -1078,9 +1112,10 @@ static void azx_init_pci(struct azx *chip) update_pci_byte(chip->pci, NVIDIA_HDA_OSTRM_COH, 0x01, NVIDIA_HDA_ENABLE_COHBIT); - break; - case AZX_DRIVER_SCH: - case AZX_DRIVER_PCH: + } + + /* Enable SCH/PCH snoop if needed */ + if (chip->driver_caps & AZX_DCAPS_SCH_SNOOP) { pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop); if (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) { pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, @@ -1091,14 +1126,6 @@ static void azx_init_pci(struct azx *chip) (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP) ? "Failed" : "OK"); } - break; - default: - /* AMD Hudson needs the similar snoop, as it seems... */ - if (chip->pci->vendor == PCI_VENDOR_ID_AMD) - update_pci_byte(chip->pci, - ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, - 0x07, ATI_SB450_HDAUDIO_ENABLE_SNOOP); - break; } } @@ -1152,7 +1179,7 @@ static irqreturn_t azx_interrupt(int irq, void *dev_id) status = azx_readb(chip, RIRBSTS); if (status & RIRB_INT_MASK) { if (status & RIRB_INT_RESPONSE) { - if (chip->driver_type == AZX_DRIVER_CTX) + if (chip->driver_caps & AZX_DCAPS_RIRB_PRE_DELAY) udelay(80); azx_update_rirb(chip); } @@ -1421,8 +1448,10 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model) if (err < 0) return err; - if (chip->driver_type == AZX_DRIVER_NVIDIA) + if (chip->driver_caps & AZX_DCAPS_RIRB_DELAY) { + snd_printd(SFX "Enable delay in RIRB handling\n"); chip->bus->needs_damn_long_delay = 1; + } codecs = 0; max_slots = azx_max_codecs[chip->driver_type]; @@ -1457,9 +1486,8 @@ static int __devinit azx_codec_create(struct azx *chip, const char *model) * sequence like the pin-detection. It seems that forcing the synced * access works around the stall. Grrr... */ - if (chip->pci->vendor == PCI_VENDOR_ID_AMD || - chip->pci->vendor == PCI_VENDOR_ID_ATI) { - snd_printk(KERN_INFO SFX "Enable sync_write for AMD chipset\n"); + if (chip->driver_caps & AZX_DCAPS_SYNC_WRITE) { + snd_printd(SFX "Enable sync_write for stable communication\n"); chip->bus->sync_write = 1; chip->bus->allow_bus_reset = 1; } @@ -1720,7 +1748,7 @@ static int azx_pcm_prepare(struct snd_pcm_substream *substream) stream_tag = azx_dev->stream_tag; /* CA-IBG chips need the playback stream starting from 1 */ - if (chip->driver_type == AZX_DRIVER_CTX && + if ((chip->driver_caps & AZX_DCAPS_CTX_WORKAROUND) && stream_tag > chip->capture_streams) stream_tag -= chip->capture_streams; return snd_hda_codec_prepare(apcm->codec, hinfo, stream_tag, @@ -2365,20 +2393,14 @@ static int __devinit check_position_fix(struct azx *chip, int fix) } /* Check VIA/ATI HD Audio Controller exist */ - switch (chip->driver_type) { - case AZX_DRIVER_VIA: - /* Use link position directly, avoid any transfer problem. */ + if (chip->driver_caps & AZX_DCAPS_POSFIX_VIA) { + snd_printd(SFX "Using VIACOMBO position fix\n"); return POS_FIX_VIACOMBO; - case AZX_DRIVER_ATI: - /* ATI chipsets don't work well with position-buffer */ + } + if (chip->driver_caps & AZX_DCAPS_POSFIX_LPIB) { + snd_printd(SFX "Using LPIB position fix\n"); return POS_FIX_LPIB; - case AZX_DRIVER_GENERIC: - /* AMD chipsets also don't work with position-buffer */ - if (chip->pci->vendor == PCI_VENDOR_ID_AMD) - return POS_FIX_LPIB; - break; } - return POS_FIX_AUTO; } @@ -2460,8 +2482,8 @@ static void __devinit check_msi(struct azx *chip) } /* NVidia chipsets seem to cause troubles with MSI */ - if (chip->driver_type == AZX_DRIVER_NVIDIA) { - printk(KERN_INFO "hda_intel: Disable MSI for Nvidia chipset\n"); + if (chip->driver_caps & AZX_DCAPS_NO_MSI) { + printk(KERN_INFO "hda_intel: Disabling MSI\n"); chip->msi = 0; } } @@ -2471,7 +2493,7 @@ static void __devinit check_msi(struct azx *chip) * constructor */ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, - int dev, int driver_type, + int dev, unsigned int driver_caps, struct azx **rchip) { struct azx *chip; @@ -2499,7 +2521,8 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, chip->card = card; chip->pci = pci; chip->irq = -1; - chip->driver_type = driver_type; + chip->driver_caps = driver_caps; + chip->driver_type = driver_caps & 0xff; check_msi(chip); chip->dev_index = dev; INIT_WORK(&chip->irq_pending_work, azx_irq_pending_work); @@ -2563,8 +2586,7 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, snd_printdd(SFX "chipset global capabilities = 0x%x\n", gcap); /* disable SB600 64bit support for safety */ - if ((chip->driver_type == AZX_DRIVER_ATI) || - (chip->driver_type == AZX_DRIVER_ATIHDMI)) { + if (chip->pci->vendor == PCI_VENDOR_ID_ATI) { struct pci_dev *p_smbus; p_smbus = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, @@ -2574,19 +2596,13 @@ static int __devinit azx_create(struct snd_card *card, struct pci_dev *pci, gcap &= ~ICH6_GCAP_64OK; pci_dev_put(p_smbus); } - } else { - /* FIXME: not sure whether this is really needed, but - * Hudson isn't stable enough for allowing everything... - * let's check later again. - */ - if (chip->pci->vendor == PCI_VENDOR_ID_AMD) - gcap &= ~ICH6_GCAP_64OK; } - /* disable 64bit DMA address for Teradici */ - /* it does not work with device 6549:1200 subsys e4a2:040b */ - if (chip->driver_type == AZX_DRIVER_TERA) + /* disable 64bit DMA address on some devices */ + if (chip->driver_caps & AZX_DCAPS_NO_64BIT) { + snd_printd(SFX "Disabling 64bit DMA\n"); gcap &= ~ICH6_GCAP_64OK; + } /* allow 64bit DMA address if supported by H/W */ if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64))) @@ -2788,38 +2804,62 @@ static void __devexit azx_remove(struct pci_dev *pci) /* PCI IDs */ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { /* CPT */ - { PCI_DEVICE(0x8086, 0x1c20), .driver_data = AZX_DRIVER_PCH }, + { PCI_DEVICE(0x8086, 0x1c20), + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP }, /* PBG */ - { PCI_DEVICE(0x8086, 0x1d20), .driver_data = AZX_DRIVER_PCH }, + { PCI_DEVICE(0x8086, 0x1d20), + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP }, /* Panther Point */ - { PCI_DEVICE(0x8086, 0x1e20), .driver_data = AZX_DRIVER_PCH }, + { PCI_DEVICE(0x8086, 0x1e20), + .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_SCH_SNOOP }, /* SCH */ - { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH }, + { PCI_DEVICE(0x8086, 0x811b), + .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP }, /* Generic Intel */ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_ANY_ID), .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8, .class_mask = 0xffffff, .driver_data = AZX_DRIVER_ICH }, - /* ATI SB 450/600 */ - { PCI_DEVICE(0x1002, 0x437b), .driver_data = AZX_DRIVER_ATI }, - { PCI_DEVICE(0x1002, 0x4383), .driver_data = AZX_DRIVER_ATI }, + /* ATI SB 450/600/700/800/900 */ + { PCI_DEVICE(0x1002, 0x437b), + .driver_data = AZX_DRIVER_ATI | AZX_DCAPS_PRESET_ATI_SB }, + { PCI_DEVICE(0x1002, 0x4383), + .driver_data = AZX_DRIVER_ATI | AZX_DCAPS_PRESET_ATI_SB }, + /* AMD Hudson */ + { PCI_DEVICE(0x1022, 0x780d), + .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB }, /* ATI HDMI */ - { PCI_DEVICE(0x1002, 0x793b), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0x7919), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0x960f), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0x970f), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0xaa00), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0xaa08), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0xaa10), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0xaa18), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0xaa20), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0xaa28), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0xaa30), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0xaa38), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0xaa40), .driver_data = AZX_DRIVER_ATIHDMI }, - { PCI_DEVICE(0x1002, 0xaa48), .driver_data = AZX_DRIVER_ATIHDMI }, + { PCI_DEVICE(0x1002, 0x793b), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0x7919), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0x960f), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0x970f), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0xaa00), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0xaa08), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0xaa10), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0xaa18), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0xaa20), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0xaa28), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0xaa30), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0xaa38), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0xaa40), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, + { PCI_DEVICE(0x1002, 0xaa48), + .driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI }, /* VIA VT8251/VT8237A */ - { PCI_DEVICE(0x1106, 0x3288), .driver_data = AZX_DRIVER_VIA }, + { PCI_DEVICE(0x1106, 0x3288), + .driver_data = AZX_DRIVER_VIA | AZX_DCAPS_POSFIX_VIA }, /* SIS966 */ { PCI_DEVICE(0x1039, 0x7502), .driver_data = AZX_DRIVER_SIS }, /* ULI M5461 */ @@ -2828,9 +2868,10 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID), .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8, .class_mask = 0xffffff, - .driver_data = AZX_DRIVER_NVIDIA }, + .driver_data = AZX_DRIVER_NVIDIA | AZX_DCAPS_PRESET_NVIDIA }, /* Teradici */ - { PCI_DEVICE(0x6549, 0x1200), .driver_data = AZX_DRIVER_TERA }, + { PCI_DEVICE(0x6549, 0x1200), + .driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT }, /* Creative X-Fi (CA0110-IBG) */ #if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE) /* the following entry conflicts with snd-ctxfi driver, @@ -2840,10 +2881,13 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_ANY_ID), .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8, .class_mask = 0xffffff, - .driver_data = AZX_DRIVER_CTX }, + .driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND | + AZX_DCAPS_RIRB_PRE_DELAY }, #else /* this entry seems still valid -- i.e. without emu20kx chip */ - { PCI_DEVICE(0x1102, 0x0009), .driver_data = AZX_DRIVER_CTX }, + { PCI_DEVICE(0x1102, 0x0009), + .driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND | + AZX_DCAPS_RIRB_PRE_DELAY }, #endif /* Vortex86MX */ { PCI_DEVICE(0x17f3, 0x3010), .driver_data = AZX_DRIVER_GENERIC }, @@ -2853,11 +2897,11 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID), .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8, .class_mask = 0xffffff, - .driver_data = AZX_DRIVER_GENERIC }, + .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_HDMI }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_ANY_ID), .class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8, .class_mask = 0xffffff, - .driver_data = AZX_DRIVER_GENERIC }, + .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_HDMI }, { 0, } }; MODULE_DEVICE_TABLE(pci, azx_ids); -- cgit v1.2.3 From 5a195b445020f6042c2096e5eb63ef900e7871ea Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 24 May 2011 11:50:57 +0200 Subject: ASoC: wm8731: fix wm8731_check_osc() connected condition The crystal oscillator is only enabled if the WM8731_SYSCLK_XTAL master clock is specified. Fix the connected() struct snd_soc_dapm_route function to take this into account. Oscillator is not enabled on machine that need it otherwise. Machine drivers have to make sure that they use the proper SYSCLK value. Signed-off-by: Nicolas Ferre Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/codecs/wm8731.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index 6dec7cee2cb4..2dc964b55e4f 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -198,7 +198,7 @@ static int wm8731_check_osc(struct snd_soc_dapm_widget *source, { struct wm8731_priv *wm8731 = snd_soc_codec_get_drvdata(source->codec); - return wm8731->sysclk_type == WM8731_SYSCLK_MCLK; + return wm8731->sysclk_type == WM8731_SYSCLK_XTAL; } static const struct snd_soc_dapm_route wm8731_intercon[] = { -- cgit v1.2.3 From 6bb74a7293d73556321fd37aefe67f6086dc25d1 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 24 May 2011 11:51:16 +0200 Subject: ASoC: sam9g20_wm8731: use the proper SYSCKL value at91sam9g20 is providing master clock to wm8731: not using a crystal but an external MCLK. We can avoid conflict and save power using WM8731_SYSCLK_MCLK as we do not need oscillator to be powered. Signed-off-by: Nicolas Ferre Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/atmel/sam9g20_wm8731.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index 28afbbf69ce0..95572d290c27 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -146,7 +146,7 @@ static int at91sam9g20ek_wm8731_init(struct snd_soc_pcm_runtime *rtd) "at91sam9g20ek_wm8731 " ": at91sam9g20ek_wm8731_init() called\n"); - ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL, + ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_MCLK, MCLK_RATE, SND_SOC_CLOCK_IN); if (ret < 0) { printk(KERN_ERR "Failed to set WM8731 SYSCLK: %d\n", ret); -- cgit v1.2.3 From 65afc4118d67f4b0934e6dc72d9b27397aea0354 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 26 May 2011 10:32:41 +0200 Subject: ASoC: Remove duplicate linux/delay.h inclusion. It's enough to include linux/delay.h just once in sound/soc/codecs/wm8915.c, so remove the duplicate. Signed-off-by: Jesper Juhl Signed-off-by: Mark Brown --- sound/soc/codecs/wm8915.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/codecs/wm8915.c b/sound/soc/codecs/wm8915.c index ccc9bd832794..a0b1a7278284 100644 --- a/sound/soc/codecs/wm8915.c +++ b/sound/soc/codecs/wm8915.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 979f486944174760400f797d509c05a018132b98 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 26 May 2011 10:54:12 +0800 Subject: ASoC: wm1250-ev1: Define "WM1250 Output" with SND_SOC_DAPM_OUTPUT Codec output pin should be defined with SND_SOC_DAPM_OUTPUT. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/codecs/wm1250-ev1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm1250-ev1.c b/sound/soc/codecs/wm1250-ev1.c index 14d0716bf009..bcc208967917 100644 --- a/sound/soc/codecs/wm1250-ev1.c +++ b/sound/soc/codecs/wm1250-ev1.c @@ -22,7 +22,7 @@ SND_SOC_DAPM_ADC("ADC", "wm1250-ev1 Capture", SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_DAC("DAC", "wm1250-ev1 Playback", SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_INPUT("WM1250 Input"), -SND_SOC_DAPM_INPUT("WM1250 Output"), +SND_SOC_DAPM_OUTPUT("WM1250 Output"), }; static const struct snd_soc_dapm_route wm1250_ev1_dapm_routes[] = { -- cgit v1.2.3 From ec80fde746e3ccf93895d25ae1a7071c9af52585 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 26 May 2011 09:53:51 -0300 Subject: perf symbols: Handle /proc/sys/kernel/kptr_restrict Perf uses /proc/modules to figure out where kernel modules are loaded. With the advent of kptr_restrict, non root users get zeroes for all module start addresses. So check if kptr_restrict is non zero and don't generate the syntethic PERF_RECORD_MMAP events for them. Warn the user about it in perf record and in perf report. In perf report the reference relocation symbol being zero means that kptr_restrict was set, thus /proc/kallsyms has only zeroed addresses, so don't use it to fixup symbol addresses when using a valid kallsyms (in the buildid cache) or vmlinux (in the vmlinux path) build-id located automatically or specified by the user. Provide an explanation about it in 'perf report' if kernel samples were taken, checking if a suitable vmlinux or kallsyms was found/specified. Restricted /proc/kallsyms don't go to the buildid cache anymore. Example: [acme@emilia ~]$ perf record -F 100000 sleep 1 WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted, check /proc/sys/kernel/kptr_restrict. Samples in kernel functions may not be resolved if a suitable vmlinux file is not found in the buildid cache or in the vmlinux path. Samples in kernel modules won't be resolved at all. If some relocation was applied (e.g. kexec) symbols may be misresolved even with a suitable vmlinux or kallsyms file. [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.005 MB perf.data (~231 samples) ] [acme@emilia ~]$ [acme@emilia ~]$ perf report --stdio Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. If some relocation was applied (e.g. kexec) symbols may be misresolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ..................... # 20.24% sleep [kernel.kallsyms] [k] page_fault 20.04% sleep [kernel.kallsyms] [k] filemap_fault 19.78% sleep [kernel.kallsyms] [k] __lru_cache_add 19.69% sleep ld-2.12.so [.] memcpy 14.71% sleep [kernel.kallsyms] [k] dput 4.70% sleep [kernel.kallsyms] [k] flush_signal_handlers 0.73% sleep [kernel.kallsyms] [k] perf_event_comm 0.11% sleep [kernel.kallsyms] [k] native_write_msr_safe # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ This is because it found a suitable vmlinux (build-id checked) in /lib/modules/2.6.39-rc7+/build/vmlinux (use -v in perf report to see the long file name). If we remove that file from the vmlinux path: [root@emilia ~]# mv /lib/modules/2.6.39-rc7+/build/vmlinux \ /lib/modules/2.6.39-rc7+/build/vmlinux.OFF [acme@emilia ~]$ perf report --stdio [kernel.kallsyms] with build id 57298cdbe0131f6871667ec0eaab4804dcf6f562 not found, continuing without symbols Kernel address maps (/proc/{kallsyms,modules}) were restricted, check /proc/sys/kernel/kptr_restrict before running 'perf record'. As no suitable kallsyms nor vmlinux was found, kernel samples can't be resolved. Samples in kernel modules can't be resolved as well. # Events: 13 cycles # # Overhead Command Shared Object Symbol # ........ ....... ................. ...... # 80.31% sleep [kernel.kallsyms] [k] 0xffffffff8103425a 19.69% sleep ld-2.12.so [.] memcpy # # (For a higher level overview, try: perf report --sort comm,dso) # [acme@emilia ~]$ Reported-by: Stephane Eranian Suggested-by: David Miller Cc: Dave Jones Cc: David Miller Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Kees Cook Cc: Linus Torvalds Cc: Mike Galbraith Cc: Paul Mackerras Cc: Pekka Enberg Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi Link: http://lkml.kernel.org/n/tip-mt512joaxxbhhp1odop04yit@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-record.c | 13 ++++++++++++ tools/perf/builtin-report.c | 26 ++++++++++++++++++++++++ tools/perf/util/event.c | 15 +++++++++++--- tools/perf/util/header.c | 8 ++++++-- tools/perf/util/symbol.c | 48 +++++++++++++++++++++++++++++++++++++++++++++ tools/perf/util/symbol.h | 3 ++- 6 files changed, 107 insertions(+), 6 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 0974f957b8fa..2ca107f3efdf 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -823,6 +823,19 @@ int cmd_record(int argc, const char **argv, const char *prefix __used) symbol__init(); + if (symbol_conf.kptr_restrict) + pr_warning("WARNING: Kernel address maps " + "(/proc/{kallsyms,modules}) are restricted, " + "check /proc/sys/kernel/kptr_restrict.\n\n" + "Samples in kernel functions may not be resolved " + "if a suitable vmlinux file is not found in the " + "buildid cache or in the vmlinux path.\n\n" + "Samples in kernel modules won't be resolved " + "at all.\n\n" + "If some relocation was applied (e.g. kexec) " + "symbols may be misresolved even with a suitable " + "vmlinux or kallsyms file.\n\n"); + if (no_buildid_cache || no_buildid) disable_buildid_cache(); diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 498c6f70a747..99156c35bc62 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -116,6 +116,9 @@ static int process_sample_event(union perf_event *event, if (al.filtered || (hide_unresolved && al.sym == NULL)) return 0; + if (al.map != NULL) + al.map->dso->hit = 1; + if (perf_session__add_hist_entry(session, &al, sample, evsel)) { pr_debug("problem incrementing symbol period, skipping event\n"); return -1; @@ -249,6 +252,8 @@ static int __cmd_report(void) u64 nr_samples; struct perf_session *session; struct perf_evsel *pos; + struct map *kernel_map; + struct kmap *kernel_kmap; const char *help = "For a higher level overview, try: perf report --sort comm,dso"; signal(SIGINT, sig_handler); @@ -268,6 +273,27 @@ static int __cmd_report(void) if (ret) goto out_delete; + kernel_map = session->host_machine.vmlinux_maps[MAP__FUNCTION]; + kernel_kmap = map__kmap(kernel_map); + if (kernel_map == NULL || + (kernel_map->dso->hit && + (kernel_kmap->ref_reloc_sym == NULL || + kernel_kmap->ref_reloc_sym->addr == 0))) { + const struct dso *kdso = kernel_map->dso; + + ui__warning("Kernel address maps " + "(/proc/{kallsyms,modules}) were restricted, " + "check /proc/sys/kernel/kptr_restrict before " + "running 'perf record'.\n\n%s\n\n" + "Samples in kernel modules can't be resolved " + "as well.\n\n", + RB_EMPTY_ROOT(&kdso->symbols[MAP__FUNCTION]) ? + "As no suitable kallsyms nor vmlinux was found, " + "kernel samples can't be resolved." : + "If some relocation was applied (e.g. kexec) " + "symbols may be misresolved."); + } + if (dump_trace) { perf_session__fprintf_nr_events(session, stdout); goto out_delete; diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index 6635fcd11ca5..0fe9adf76379 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -553,9 +553,18 @@ static int perf_event__process_kernel_mmap(union perf_event *event, goto out_problem; perf_event__set_kernel_mmap_len(event, machine->vmlinux_maps); - perf_session__set_kallsyms_ref_reloc_sym(machine->vmlinux_maps, - symbol_name, - event->mmap.pgoff); + + /* + * Avoid using a zero address (kptr_restrict) for the ref reloc + * symbol. Effectively having zero here means that at record + * time /proc/sys/kernel/kptr_restrict was non zero. + */ + if (event->mmap.pgoff != 0) { + perf_session__set_kallsyms_ref_reloc_sym(machine->vmlinux_maps, + symbol_name, + event->mmap.pgoff); + } + if (machine__is_default_guest(machine)) { /* * preload dso of guest kernel and modules diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 0717bebc7649..afb0849fe530 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -193,9 +193,13 @@ int build_id_cache__add_s(const char *sbuild_id, const char *debugdir, *linkname = malloc(size), *targetname; int len, err = -1; - if (is_kallsyms) + if (is_kallsyms) { + if (symbol_conf.kptr_restrict) { + pr_debug("Not caching a kptr_restrict'ed /proc/kallsyms\n"); + return 0; + } realname = (char *)name; - else + } else realname = realpath(name, NULL); if (realname == NULL || filename == NULL || linkname == NULL) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 516876dfbe52..eec196329fd9 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -676,9 +676,30 @@ discard_symbol: rb_erase(&pos->rb_node, root); return count + moved; } +static bool symbol__restricted_filename(const char *filename, + const char *restricted_filename) +{ + bool restricted = false; + + if (symbol_conf.kptr_restrict) { + char *r = realpath(filename, NULL); + + if (r != NULL) { + restricted = strcmp(r, restricted_filename) == 0; + free(r); + return restricted; + } + } + + return restricted; +} + int dso__load_kallsyms(struct dso *dso, const char *filename, struct map *map, symbol_filter_t filter) { + if (symbol__restricted_filename(filename, "/proc/kallsyms")) + return -1; + if (dso__load_all_kallsyms(dso, filename, map) < 0) return -1; @@ -1790,6 +1811,9 @@ static int machine__create_modules(struct machine *machine) modules = path; } + if (symbol__restricted_filename(path, "/proc/modules")) + return -1; + file = fopen(modules, "r"); if (file == NULL) return -1; @@ -2239,6 +2263,9 @@ static u64 machine__get_kernel_start_addr(struct machine *machine) } } + if (symbol__restricted_filename(filename, "/proc/kallsyms")) + return 0; + if (kallsyms__parse(filename, &args, symbol__in_kernel) <= 0) return 0; @@ -2410,6 +2437,25 @@ static int setup_list(struct strlist **list, const char *list_str, return 0; } +static bool symbol__read_kptr_restrict(void) +{ + bool value = false; + + if (geteuid() != 0) { + FILE *fp = fopen("/proc/sys/kernel/kptr_restrict", "r"); + if (fp != NULL) { + char line[8]; + + if (fgets(line, sizeof(line), fp) != NULL) + value = atoi(line) != 0; + + fclose(fp); + } + } + + return value; +} + int symbol__init(void) { const char *symfs; @@ -2456,6 +2502,8 @@ int symbol__init(void) if (symfs != symbol_conf.symfs) free((void *)symfs); + symbol_conf.kptr_restrict = symbol__read_kptr_restrict(); + symbol_conf.initialized = true; return 0; diff --git a/tools/perf/util/symbol.h b/tools/perf/util/symbol.h index 242de0101a86..325ee36a9d29 100644 --- a/tools/perf/util/symbol.h +++ b/tools/perf/util/symbol.h @@ -75,7 +75,8 @@ struct symbol_conf { use_callchain, exclude_other, show_cpu_utilization, - initialized; + initialized, + kptr_restrict; const char *vmlinux_name, *kallsyms_name, *source_prefix, -- cgit v1.2.3 From 75911c9bd1134f8c0b682aa1e8a8dbefec3ca07a Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 26 May 2011 10:13:38 -0300 Subject: perf tools: Fix build on older systems Where /usr/include/linux/const.h is not present, e.g. RHEL5. Reported-by: Srikar Dronamraju Cc: Srikar Dronamraju Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi Link: http://lkml.kernel.org/n/tip-ypcw2mu0w7dl1rrc6ncz3pee@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile | 2 ++ tools/perf/util/include/linux/const.h | 1 + 2 files changed, 3 insertions(+) create mode 100644 tools/perf/util/include/linux/const.h diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 1455413ec7a7..032ba6398a5c 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -215,11 +215,13 @@ LIB_FILE=$(OUTPUT)libperf.a LIB_H += ../../include/linux/perf_event.h LIB_H += ../../include/linux/rbtree.h LIB_H += ../../include/linux/list.h +LIB_H += ../../include/linux/const.h LIB_H += ../../include/linux/hash.h LIB_H += ../../include/linux/stringify.h LIB_H += util/include/linux/bitmap.h LIB_H += util/include/linux/bitops.h LIB_H += util/include/linux/compiler.h +LIB_H += util/include/linux/const.h LIB_H += util/include/linux/ctype.h LIB_H += util/include/linux/kernel.h LIB_H += util/include/linux/list.h diff --git a/tools/perf/util/include/linux/const.h b/tools/perf/util/include/linux/const.h new file mode 100644 index 000000000000..1b476c9ae649 --- /dev/null +++ b/tools/perf/util/include/linux/const.h @@ -0,0 +1 @@ +#include "../../../../include/linux/const.h" -- cgit v1.2.3 From ea77b94774b3cc67162d74894b49af7eb17071f0 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 26 May 2011 16:32:18 +0300 Subject: ASoC: Fix power down for widgetless per-card DAPM context case Commit 52ba67b ("ASoC: Force all DAPM contexts into the same bias state") powers up all the DAPM contexts in a card if any DAPM context becomes active. Unfortunately power down newer happens if per-card DAPM context doesn't have any widgets. Reason for this is that power state of per-card DAPM context without widgets is never cleared and thus all the DAPM contexts remain permanently active. Test for widgetless calling DAPM context in dapm_power_widgets() doesn't work for per-card DAPM context since power change is never originating from widgetless per-card DAPM context. Fix this by pre-clearing power state flag of non-codec DAPM context at the beginning of power sequence. Signed-off-by: Jarkko Nikula Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 456617e63789..999bb08cdfb1 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -1110,7 +1110,7 @@ static int dapm_power_widgets(struct snd_soc_dapm_context *dapm, int event) trace_snd_soc_dapm_start(card); list_for_each_entry(d, &card->dapm_list, list) - if (d->n_widgets) + if (d->n_widgets || d->codec == NULL) d->dev_power = 0; /* Check which widgets we need to power and store them in -- cgit v1.2.3 From ba9f207c9f82115aba4ce04b22e0081af0ae300f Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 20 May 2011 02:09:54 +0200 Subject: rcu: Fix unpaired rcu_irq_enter() from locking selftests HARDIRQ_ENTER() maps to irq_enter() which calls rcu_irq_enter(). But HARDIRQ_EXIT() maps to __irq_exit() which doesn't call rcu_irq_exit(). So for every locking selftest that simulates hardirq disabled, we create an imbalance in the rcu extended quiescent state internal state. As a result, after the first missing rcu_irq_exit(), subsequent irqs won't exit dyntick-idle mode after leaving the interrupt handler. This means that RCU won't see the affected CPU as being in an extended quiescent state, resulting in long grace-period delays (as in grace periods extending for hours). To fix this, just use __irq_enter() to simulate the hardirq context. This is sufficient for the locking selftests as we don't need to exit any extended quiescent state or perform any check that irqs normally do when they wake up from idle. As a side effect, this patch makes it possible to restore "rcu: Decrease memory-barrier usage based on semi-formal proof", which eventually helped finding this bug. Reported-and-tested-by: Yinghai Lu Signed-off-by: Frederic Weisbecker Cc: Paul E. McKenney Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Stable Signed-off-by: Paul E. McKenney --- lib/locking-selftest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/locking-selftest.c b/lib/locking-selftest.c index 619313ed6c46..507a22fab738 100644 --- a/lib/locking-selftest.c +++ b/lib/locking-selftest.c @@ -144,7 +144,7 @@ static void init_shared_classes(void) #define HARDIRQ_ENTER() \ local_irq_disable(); \ - irq_enter(); \ + __irq_enter(); \ WARN_ON(!in_irq()); #define HARDIRQ_EXIT() \ -- cgit v1.2.3 From 0bbcc529fcea9c7de5e2e7243f9913b8f7302a8c Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 16 May 2011 02:24:04 -0700 Subject: rcu: Add memory barriers Add the memory barriers added by e59fb3120b. Signed-off-by: Paul E. McKenney --- kernel/rcutree.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index e486f7c3ffb8..3731141d8ad7 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -907,6 +907,12 @@ static void rcu_report_qs_rsp(struct rcu_state *rsp, unsigned long flags) unsigned long gp_duration; WARN_ON_ONCE(!rcu_gp_in_progress(rsp)); + + /* + * Ensure that all grace-period and pre-grace-period activity + * is seen before the assignment to rsp->completed. + */ + smp_mb(); /* See above block comment. */ gp_duration = jiffies - rsp->gp_start; if (gp_duration > rsp->gp_max) rsp->gp_max = gp_duration; -- cgit v1.2.3 From 1135633bddcf7a819a1490c18d04965c490bcc1e Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 16 May 2011 02:44:06 -0700 Subject: rcu: Remove old memory barriers from rcu_process_callbacks() Second step of partitioning of commit e59fb3120b. Signed-off-by: Paul E. McKenney --- kernel/rcutree.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 3731141d8ad7..011bf6f261a2 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1460,25 +1460,11 @@ __rcu_process_callbacks(struct rcu_state *rsp, struct rcu_data *rdp) */ static void rcu_process_callbacks(void) { - /* - * Memory references from any prior RCU read-side critical sections - * executed by the interrupted code must be seen before any RCU - * grace-period manipulations below. - */ - smp_mb(); /* See above block comment. */ - __rcu_process_callbacks(&rcu_sched_state, &__get_cpu_var(rcu_sched_data)); __rcu_process_callbacks(&rcu_bh_state, &__get_cpu_var(rcu_bh_data)); rcu_preempt_process_callbacks(); - /* - * Memory references from any later RCU read-side critical sections - * executed by the interrupted code must be seen after any RCU - * grace-period manipulations above. - */ - smp_mb(); /* See above block comment. */ - /* If we are last CPU on way to dyntick-idle mode, accelerate it. */ rcu_needs_cpu_flush(); } -- cgit v1.2.3 From b5904090c754327ed6c2ecaefed4f7d473df393f Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 16 May 2011 02:52:04 -0700 Subject: rcu: Don't do reschedule unless in irq Condition the set_need_resched() in rcu_irq_exit() on in_irq(). This should be a no-op, because rcu_irq_exit() should only be called from irq. Signed-off-by: Paul E. McKenney --- kernel/rcutree.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 011bf6f261a2..195b3a3313e3 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -421,8 +421,9 @@ void rcu_irq_exit(void) WARN_ON_ONCE(rdtp->dynticks & 0x1); /* If the interrupt queued a callback, get out of dyntick mode. */ - if (__this_cpu_read(rcu_sched_data.nxtlist) || - __this_cpu_read(rcu_bh_data.nxtlist)) + if (in_irq() && + (__this_cpu_read(rcu_sched_data.nxtlist) || + __this_cpu_read(rcu_bh_data.nxtlist))) set_need_resched(); } -- cgit v1.2.3 From 4305ce7894dd38b0633bfc8978437320119223bd Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 16 May 2011 14:27:31 -0700 Subject: rcu: Make rcu_enter_nohz() pay attention to nesting The old version of rcu_enter_nohz() forced RCU into nohz mode even if the nesting count was non-zero. This change causes rcu_enter_nohz() to hold off for non-zero nesting counts. Signed-off-by: Paul E. McKenney --- kernel/rcutree.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 195b3a3313e3..99c6038ad04d 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -324,8 +324,8 @@ void rcu_enter_nohz(void) smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */ local_irq_save(flags); rdtp = &__get_cpu_var(rcu_dynticks); - rdtp->dynticks++; - rdtp->dynticks_nesting--; + if (--rdtp->dynticks_nesting == 0) + rdtp->dynticks++; WARN_ON_ONCE(rdtp->dynticks & 0x1); local_irq_restore(flags); } -- cgit v1.2.3 From 23b5c8fa01b723c70a20d6e4ef4ff54c7656d6e1 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 7 Sep 2010 10:38:22 -0700 Subject: rcu: Decrease memory-barrier usage based on semi-formal proof (Note: this was reverted, and is now being re-applied in pieces, with this being the fifth and final piece. See below for the reason that it is now felt to be safe to re-apply this.) Commit d09b62d fixed grace-period synchronization, but left some smp_mb() invocations in rcu_process_callbacks() that are no longer needed, but sheer paranoia prevented them from being removed. This commit removes them and provides a proof of correctness in their absence. It also adds a memory barrier to rcu_report_qs_rsp() immediately before the update to rsp->completed in order to handle the theoretical possibility that the compiler or CPU might move massive quantities of code into a lock-based critical section. This also proves that the sheer paranoia was not entirely unjustified, at least from a theoretical point of view. In addition, the old dyntick-idle synchronization depended on the fact that grace periods were many milliseconds in duration, so that it could be assumed that no dyntick-idle CPU could reorder a memory reference across an entire grace period. Unfortunately for this design, the addition of expedited grace periods breaks this assumption, which has the unfortunate side-effect of requiring atomic operations in the functions that track dyntick-idle state for RCU. (There is some hope that the algorithms used in user-level RCU might be applied here, but some work is required to handle the NMIs that user-space applications can happily ignore. For the short term, better safe than sorry.) This proof assumes that neither compiler nor CPU will allow a lock acquisition and release to be reordered, as doing so can result in deadlock. The proof is as follows: 1. A given CPU declares a quiescent state under the protection of its leaf rcu_node's lock. 2. If there is more than one level of rcu_node hierarchy, the last CPU to declare a quiescent state will also acquire the ->lock of the next rcu_node up in the hierarchy, but only after releasing the lower level's lock. The acquisition of this lock clearly cannot occur prior to the acquisition of the leaf node's lock. 3. Step 2 repeats until we reach the root rcu_node structure. Please note again that only one lock is held at a time through this process. The acquisition of the root rcu_node's ->lock must occur after the release of that of the leaf rcu_node. 4. At this point, we set the ->completed field in the rcu_state structure in rcu_report_qs_rsp(). However, if the rcu_node hierarchy contains only one rcu_node, then in theory the code preceding the quiescent state could leak into the critical section. We therefore precede the update of ->completed with a memory barrier. All CPUs will therefore agree that any updates preceding any report of a quiescent state will have happened before the update of ->completed. 5. Regardless of whether a new grace period is needed, rcu_start_gp() will propagate the new value of ->completed to all of the leaf rcu_node structures, under the protection of each rcu_node's ->lock. If a new grace period is needed immediately, this propagation will occur in the same critical section that ->completed was set in, but courtesy of the memory barrier in #4 above, is still seen to follow any pre-quiescent-state activity. 6. When a given CPU invokes __rcu_process_gp_end(), it becomes aware of the end of the old grace period and therefore makes any RCU callbacks that were waiting on that grace period eligible for invocation. If this CPU is the same one that detected the end of the grace period, and if there is but a single rcu_node in the hierarchy, we will still be in the single critical section. In this case, the memory barrier in step #4 guarantees that all callbacks will be seen to execute after each CPU's quiescent state. On the other hand, if this is a different CPU, it will acquire the leaf rcu_node's ->lock, and will again be serialized after each CPU's quiescent state for the old grace period. On the strength of this proof, this commit therefore removes the memory barriers from rcu_process_callbacks() and adds one to rcu_report_qs_rsp(). The effect is to reduce the number of memory barriers by one and to reduce the frequency of execution from about once per scheduling tick per CPU to once per grace period. This was reverted do to hangs found during testing by Yinghai Lu and Ingo Molnar. Frederic Weisbecker supplied Yinghai with tracing that located the underlying problem, and Frederic also provided the fix. The underlying problem was that the HARDIRQ_ENTER() macro from lib/locking-selftest.c invoked irq_enter(), which in turn invokes rcu_irq_enter(), but HARDIRQ_EXIT() invoked __irq_exit(), which does not invoke rcu_irq_exit(). This situation resulted in calls to rcu_irq_enter() that were not balanced by the required calls to rcu_irq_exit(). Therefore, after these locking selftests completed, RCU's dyntick-idle nesting count was a large number (for example, 72), which caused RCU to to conclude that the affected CPU was not in dyntick-idle mode when in fact it was. RCU would therefore incorrectly wait for this dyntick-idle CPU, resulting in hangs. In contrast, with Frederic's patch, which replaces the irq_enter() in HARDIRQ_ENTER() with an __irq_enter(), these tests don't ever call either rcu_irq_enter() or rcu_irq_exit(), which works because the CPU running the test is already marked as not being in dyntick-idle mode. This means that the rcu_irq_enter() and rcu_irq_exit() calls and RCU then has no problem working out which CPUs are in dyntick-idle mode and which are not. The reason that the imbalance was not noticed before the barrier patch was applied is that the old implementation of rcu_enter_nohz() ignored the nesting depth. This could still result in delays, but much shorter ones. Whenever there was a delay, RCU would IPI the CPU with the unbalanced nesting level, which would eventually result in rcu_enter_nohz() being called, which in turn would force RCU to see that the CPU was in dyntick-idle mode. The reason that very few people noticed the problem is that the mismatched irq_enter() vs. __irq_exit() occured only when the kernel was built with CONFIG_DEBUG_LOCKING_API_SELFTESTS. Signed-off-by: Paul E. McKenney Reviewed-by: Josh Triplett --- Documentation/RCU/trace.txt | 17 ++----- kernel/rcutree.c | 111 ++++++++++++++++++++------------------------ kernel/rcutree.h | 9 ++-- kernel/rcutree_plugin.h | 7 ++- kernel/rcutree_trace.c | 12 ++--- 5 files changed, 67 insertions(+), 89 deletions(-) diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index c078ad48f7a1..8173cec473aa 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -99,18 +99,11 @@ o "qp" indicates that RCU still expects a quiescent state from o "dt" is the current value of the dyntick counter that is incremented when entering or leaving dynticks idle state, either by the - scheduler or by irq. The number after the "/" is the interrupt - nesting depth when in dyntick-idle state, or one greater than - the interrupt-nesting depth otherwise. - - This field is displayed only for CONFIG_NO_HZ kernels. - -o "dn" is the current value of the dyntick counter that is incremented - when entering or leaving dynticks idle state via NMI. If both - the "dt" and "dn" values are even, then this CPU is in dynticks - idle mode and may be ignored by RCU. If either of these two - counters is odd, then RCU must be alert to the possibility of - an RCU read-side critical section running on this CPU. + scheduler or by irq. This number is even if the CPU is in + dyntick idle mode and odd otherwise. The number after the first + "/" is the interrupt nesting depth when in dyntick-idle state, + or one greater than the interrupt-nesting depth otherwise. + The number after the second "/" is the NMI nesting depth. This field is displayed only for CONFIG_NO_HZ kernels. diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 99c6038ad04d..5616b17e4a22 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -162,7 +162,7 @@ EXPORT_SYMBOL_GPL(rcu_note_context_switch); #ifdef CONFIG_NO_HZ DEFINE_PER_CPU(struct rcu_dynticks, rcu_dynticks) = { .dynticks_nesting = 1, - .dynticks = 1, + .dynticks = ATOMIC_INIT(1), }; #endif /* #ifdef CONFIG_NO_HZ */ @@ -321,13 +321,25 @@ void rcu_enter_nohz(void) unsigned long flags; struct rcu_dynticks *rdtp; - smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */ local_irq_save(flags); rdtp = &__get_cpu_var(rcu_dynticks); - if (--rdtp->dynticks_nesting == 0) - rdtp->dynticks++; - WARN_ON_ONCE(rdtp->dynticks & 0x1); + if (--rdtp->dynticks_nesting) { + local_irq_restore(flags); + return; + } + /* CPUs seeing atomic_inc() must see prior RCU read-side crit sects */ + smp_mb__before_atomic_inc(); /* See above. */ + atomic_inc(&rdtp->dynticks); + smp_mb__after_atomic_inc(); /* Force ordering with next sojourn. */ + WARN_ON_ONCE(atomic_read(&rdtp->dynticks) & 0x1); local_irq_restore(flags); + + /* If the interrupt queued a callback, get out of dyntick mode. */ + if (in_irq() && + (__get_cpu_var(rcu_sched_data).nxtlist || + __get_cpu_var(rcu_bh_data).nxtlist || + rcu_preempt_needs_cpu(smp_processor_id()))) + set_need_resched(); } /* @@ -343,11 +355,16 @@ void rcu_exit_nohz(void) local_irq_save(flags); rdtp = &__get_cpu_var(rcu_dynticks); - rdtp->dynticks++; - rdtp->dynticks_nesting++; - WARN_ON_ONCE(!(rdtp->dynticks & 0x1)); + if (rdtp->dynticks_nesting++) { + local_irq_restore(flags); + return; + } + smp_mb__before_atomic_inc(); /* Force ordering w/previous sojourn. */ + atomic_inc(&rdtp->dynticks); + /* CPUs seeing atomic_inc() must see later RCU read-side crit sects */ + smp_mb__after_atomic_inc(); /* See above. */ + WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1)); local_irq_restore(flags); - smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */ } /** @@ -361,11 +378,15 @@ void rcu_nmi_enter(void) { struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); - if (rdtp->dynticks & 0x1) + if (rdtp->dynticks_nmi_nesting == 0 && + (atomic_read(&rdtp->dynticks) & 0x1)) return; - rdtp->dynticks_nmi++; - WARN_ON_ONCE(!(rdtp->dynticks_nmi & 0x1)); - smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */ + rdtp->dynticks_nmi_nesting++; + smp_mb__before_atomic_inc(); /* Force delay from prior write. */ + atomic_inc(&rdtp->dynticks); + /* CPUs seeing atomic_inc() must see later RCU read-side crit sects */ + smp_mb__after_atomic_inc(); /* See above. */ + WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1)); } /** @@ -379,11 +400,14 @@ void rcu_nmi_exit(void) { struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); - if (rdtp->dynticks & 0x1) + if (rdtp->dynticks_nmi_nesting == 0 || + --rdtp->dynticks_nmi_nesting != 0) return; - smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */ - rdtp->dynticks_nmi++; - WARN_ON_ONCE(rdtp->dynticks_nmi & 0x1); + /* CPUs seeing atomic_inc() must see prior RCU read-side crit sects */ + smp_mb__before_atomic_inc(); /* See above. */ + atomic_inc(&rdtp->dynticks); + smp_mb__after_atomic_inc(); /* Force delay to next write. */ + WARN_ON_ONCE(atomic_read(&rdtp->dynticks) & 0x1); } /** @@ -394,13 +418,7 @@ void rcu_nmi_exit(void) */ void rcu_irq_enter(void) { - struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); - - if (rdtp->dynticks_nesting++) - return; - rdtp->dynticks++; - WARN_ON_ONCE(!(rdtp->dynticks & 0x1)); - smp_mb(); /* CPUs seeing ++ must see later RCU read-side crit sects */ + rcu_exit_nohz(); } /** @@ -412,19 +430,7 @@ void rcu_irq_enter(void) */ void rcu_irq_exit(void) { - struct rcu_dynticks *rdtp = &__get_cpu_var(rcu_dynticks); - - if (--rdtp->dynticks_nesting) - return; - smp_mb(); /* CPUs seeing ++ must see prior RCU read-side crit sects */ - rdtp->dynticks++; - WARN_ON_ONCE(rdtp->dynticks & 0x1); - - /* If the interrupt queued a callback, get out of dyntick mode. */ - if (in_irq() && - (__this_cpu_read(rcu_sched_data.nxtlist) || - __this_cpu_read(rcu_bh_data.nxtlist))) - set_need_resched(); + rcu_enter_nohz(); } #ifdef CONFIG_SMP @@ -436,19 +442,8 @@ void rcu_irq_exit(void) */ static int dyntick_save_progress_counter(struct rcu_data *rdp) { - int ret; - int snap; - int snap_nmi; - - snap = rdp->dynticks->dynticks; - snap_nmi = rdp->dynticks->dynticks_nmi; - smp_mb(); /* Order sampling of snap with end of grace period. */ - rdp->dynticks_snap = snap; - rdp->dynticks_nmi_snap = snap_nmi; - ret = ((snap & 0x1) == 0) && ((snap_nmi & 0x1) == 0); - if (ret) - rdp->dynticks_fqs++; - return ret; + rdp->dynticks_snap = atomic_add_return(0, &rdp->dynticks->dynticks); + return 0; } /* @@ -459,16 +454,11 @@ static int dyntick_save_progress_counter(struct rcu_data *rdp) */ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp) { - long curr; - long curr_nmi; - long snap; - long snap_nmi; + unsigned long curr; + unsigned long snap; - curr = rdp->dynticks->dynticks; - snap = rdp->dynticks_snap; - curr_nmi = rdp->dynticks->dynticks_nmi; - snap_nmi = rdp->dynticks_nmi_snap; - smp_mb(); /* force ordering with cpu entering/leaving dynticks. */ + curr = (unsigned long)atomic_add_return(0, &rdp->dynticks->dynticks); + snap = (unsigned long)rdp->dynticks_snap; /* * If the CPU passed through or entered a dynticks idle phase with @@ -478,8 +468,7 @@ static int rcu_implicit_dynticks_qs(struct rcu_data *rdp) * read-side critical section that started before the beginning * of the current RCU grace period. */ - if ((curr != snap || (curr & 0x1) == 0) && - (curr_nmi != snap_nmi || (curr_nmi & 0x1) == 0)) { + if ((curr & 0x1) == 0 || ULONG_CMP_GE(curr, snap + 2)) { rdp->dynticks_fqs++; return 1; } diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 257664815d5d..93d4a1c2e88b 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -84,11 +84,9 @@ * Dynticks per-CPU state. */ struct rcu_dynticks { - int dynticks_nesting; /* Track nesting level, sort of. */ - int dynticks; /* Even value for dynticks-idle, else odd. */ - int dynticks_nmi; /* Even value for either dynticks-idle or */ - /* not in nmi handler, else odd. So this */ - /* remains even for nmi from irq handler. */ + int dynticks_nesting; /* Track irq/process nesting level. */ + int dynticks_nmi_nesting; /* Track NMI nesting level. */ + atomic_t dynticks; /* Even value for dynticks-idle, else odd. */ }; /* RCU's kthread states for tracing. */ @@ -284,7 +282,6 @@ struct rcu_data { /* 3) dynticks interface. */ struct rcu_dynticks *dynticks; /* Shared per-CPU dynticks state. */ int dynticks_snap; /* Per-GP tracking for dynticks. */ - int dynticks_nmi_snap; /* Per-GP tracking for dynticks_nmi. */ #endif /* #ifdef CONFIG_NO_HZ */ /* 4) reasons this CPU needed to be kicked by force_quiescent_state */ diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 3f6559a5f5cd..ed339702481d 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1520,7 +1520,6 @@ int rcu_needs_cpu(int cpu) { int c = 0; int snap; - int snap_nmi; int thatcpu; /* Check for being in the holdoff period. */ @@ -1531,10 +1530,10 @@ int rcu_needs_cpu(int cpu) for_each_online_cpu(thatcpu) { if (thatcpu == cpu) continue; - snap = per_cpu(rcu_dynticks, thatcpu).dynticks; - snap_nmi = per_cpu(rcu_dynticks, thatcpu).dynticks_nmi; + snap = atomic_add_return(0, &per_cpu(rcu_dynticks, + thatcpu).dynticks); smp_mb(); /* Order sampling of snap with end of grace period. */ - if (((snap & 0x1) != 0) || ((snap_nmi & 0x1) != 0)) { + if ((snap & 0x1) != 0) { per_cpu(rcu_dyntick_drain, cpu) = 0; per_cpu(rcu_dyntick_holdoff, cpu) = jiffies - 1; return rcu_needs_cpu_quick_check(cpu); diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c index aa0fd72b4bc7..9678cc3650f5 100644 --- a/kernel/rcutree_trace.c +++ b/kernel/rcutree_trace.c @@ -69,10 +69,10 @@ static void print_one_rcu_data(struct seq_file *m, struct rcu_data *rdp) rdp->passed_quiesc, rdp->passed_quiesc_completed, rdp->qs_pending); #ifdef CONFIG_NO_HZ - seq_printf(m, " dt=%d/%d dn=%d df=%lu", - rdp->dynticks->dynticks, + seq_printf(m, " dt=%d/%d/%d df=%lu", + atomic_read(&rdp->dynticks->dynticks), rdp->dynticks->dynticks_nesting, - rdp->dynticks->dynticks_nmi, + rdp->dynticks->dynticks_nmi_nesting, rdp->dynticks_fqs); #endif /* #ifdef CONFIG_NO_HZ */ seq_printf(m, " of=%lu ri=%lu", rdp->offline_fqs, rdp->resched_ipi); @@ -141,9 +141,9 @@ static void print_one_rcu_data_csv(struct seq_file *m, struct rcu_data *rdp) rdp->qs_pending); #ifdef CONFIG_NO_HZ seq_printf(m, ",%d,%d,%d,%lu", - rdp->dynticks->dynticks, + atomic_read(&rdp->dynticks->dynticks), rdp->dynticks->dynticks_nesting, - rdp->dynticks->dynticks_nmi, + rdp->dynticks->dynticks_nmi_nesting, rdp->dynticks_fqs); #endif /* #ifdef CONFIG_NO_HZ */ seq_printf(m, ",%lu,%lu", rdp->offline_fqs, rdp->resched_ipi); @@ -167,7 +167,7 @@ static int show_rcudata_csv(struct seq_file *m, void *unused) { seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\","); #ifdef CONFIG_NO_HZ - seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\","); + seq_puts(m, "\"dt\",\"dt nesting\",\"dt NMI nesting\",\"df\","); #endif /* #ifdef CONFIG_NO_HZ */ seq_puts(m, "\"of\",\"ri\",\"ql\",\"b\",\"ci\",\"co\",\"ca\"\n"); #ifdef CONFIG_TREE_PREEMPT_RCU -- cgit v1.2.3 From 249ddc79a38a8918ad53ac22606ca8af694344a5 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Tue, 24 May 2011 10:20:17 +0200 Subject: netfilter: ipset: Use proper timeout value to jiffies conversion Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/ipset/ip_set_timeout.h | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/include/linux/netfilter/ipset/ip_set_timeout.h b/include/linux/netfilter/ipset/ip_set_timeout.h index 9f30c5f2ec1c..bcdd40ad39ed 100644 --- a/include/linux/netfilter/ipset/ip_set_timeout.h +++ b/include/linux/netfilter/ipset/ip_set_timeout.h @@ -45,7 +45,7 @@ ip_set_timeout_test(unsigned long timeout) { return timeout != IPSET_ELEM_UNSET && (timeout == IPSET_ELEM_PERMANENT || - time_after(timeout, jiffies)); + time_is_after_jiffies(timeout)); } static inline bool @@ -53,7 +53,7 @@ ip_set_timeout_expired(unsigned long timeout) { return timeout != IPSET_ELEM_UNSET && timeout != IPSET_ELEM_PERMANENT && - time_before(timeout, jiffies); + time_is_before_jiffies(timeout); } static inline unsigned long @@ -64,7 +64,7 @@ ip_set_timeout_set(u32 timeout) if (!timeout) return IPSET_ELEM_PERMANENT; - t = timeout * HZ + jiffies; + t = msecs_to_jiffies(timeout * 1000) + jiffies; if (t == IPSET_ELEM_UNSET || t == IPSET_ELEM_PERMANENT) /* Bingo! */ t++; @@ -75,7 +75,8 @@ ip_set_timeout_set(u32 timeout) static inline u32 ip_set_timeout_get(unsigned long timeout) { - return timeout == IPSET_ELEM_PERMANENT ? 0 : (timeout - jiffies)/HZ; + return timeout == IPSET_ELEM_PERMANENT ? 0 : + jiffies_to_msecs(timeout - jiffies)/1000; } #else @@ -89,14 +90,14 @@ static inline bool ip_set_timeout_test(unsigned long timeout) { return timeout == IPSET_ELEM_PERMANENT || - time_after(timeout, jiffies); + time_is_after_jiffies(timeout); } static inline bool ip_set_timeout_expired(unsigned long timeout) { return timeout != IPSET_ELEM_PERMANENT && - time_before(timeout, jiffies); + time_is_before_jiffies(timeout); } static inline unsigned long @@ -107,7 +108,7 @@ ip_set_timeout_set(u32 timeout) if (!timeout) return IPSET_ELEM_PERMANENT; - t = timeout * HZ + jiffies; + t = msecs_to_jiffies(timeout * 1000) + jiffies; if (t == IPSET_ELEM_PERMANENT) /* Bingo! :-) */ t++; @@ -118,7 +119,8 @@ ip_set_timeout_set(u32 timeout) static inline u32 ip_set_timeout_get(unsigned long timeout) { - return timeout == IPSET_ELEM_PERMANENT ? 0 : (timeout - jiffies)/HZ; + return timeout == IPSET_ELEM_PERMANENT ? 0 : + jiffies_to_msecs(timeout - jiffies)/1000; } #endif /* ! IP_SET_BITMAP_TIMEOUT */ -- cgit v1.2.3 From b141c242ff978b63cdf0f3d1a767a5152750166b Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Tue, 24 May 2011 10:20:18 +0200 Subject: netfilter: ipset: remove unused variable from type_pf_tdel() Variable 'ret' is set in type_pf_tdel() but not used, remove. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- include/linux/netfilter/ipset/ip_set_ahash.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/netfilter/ipset/ip_set_ahash.h b/include/linux/netfilter/ipset/ip_set_ahash.h index a0196ac79051..ac3c822eb39a 100644 --- a/include/linux/netfilter/ipset/ip_set_ahash.h +++ b/include/linux/netfilter/ipset/ip_set_ahash.h @@ -839,7 +839,7 @@ type_pf_tdel(struct ip_set *set, void *value, u32 timeout) struct htable *t = h->table; const struct type_pf_elem *d = value; struct hbucket *n; - int i, ret = 0; + int i; struct type_pf_elem *data; u32 key; @@ -850,7 +850,7 @@ type_pf_tdel(struct ip_set *set, void *value, u32 timeout) if (!type_pf_data_equal(data, d)) continue; if (type_pf_data_expired(data)) - ret = -IPSET_ERR_EXIST; + return -IPSET_ERR_EXIST; if (i != n->pos - 1) /* Not last one */ type_pf_data_copy(data, ahash_tdata(n, n->pos - 1)); -- cgit v1.2.3 From 9184a9cba622d9e38462ce11dff7da094b4fea84 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Tue, 24 May 2011 10:20:19 +0200 Subject: netfilter: ipset: fix ip_set_flush return code ip_set_flush returned -EPROTO instead of -IPSET_ERR_PROTOCOL, fixed Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipset/ip_set_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 72d1ac611fdc..8041befc6555 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -815,7 +815,7 @@ ip_set_flush(struct sock *ctnl, struct sk_buff *skb, ip_set_id_t i; if (unlikely(protocol_failed(attr))) - return -EPROTO; + return -IPSET_ERR_PROTOCOL; if (!attr[IPSET_ATTR_SETNAME]) { for (i = 0; i < ip_set_max; i++) -- cgit v1.2.3 From 97242c85a2c8160eac5a6e945209b5b6ae8ab5a3 Mon Sep 17 00:00:00 2001 From: David Miller Date: Thu, 19 May 2011 18:14:39 -0400 Subject: netfilter: Fix several warnings in compat_mtw_from_user(). Kill set but not used 'entry_offset'. Add a default case to the switch statement so the compiler can see that we always initialize off and size_kern before using them. Signed-off-by: David S. Miller Signed-off-by: Pablo Neira Ayuso --- net/bridge/netfilter/ebtables.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/bridge/netfilter/ebtables.c b/net/bridge/netfilter/ebtables.c index 1a92b369c820..2b5ca1a0054d 100644 --- a/net/bridge/netfilter/ebtables.c +++ b/net/bridge/netfilter/ebtables.c @@ -1883,14 +1883,13 @@ static int compat_mtw_from_user(struct compat_ebt_entry_mwt *mwt, struct xt_target *wt; void *dst = NULL; int off, pad = 0; - unsigned int size_kern, entry_offset, match_size = mwt->match_size; + unsigned int size_kern, match_size = mwt->match_size; strlcpy(name, mwt->u.name, sizeof(name)); if (state->buf_kern_start) dst = state->buf_kern_start + state->buf_kern_offset; - entry_offset = (unsigned char *) mwt - base; switch (compat_mwt) { case EBT_COMPAT_MATCH: match = try_then_request_module(xt_find_match(NFPROTO_BRIDGE, @@ -1933,6 +1932,9 @@ static int compat_mtw_from_user(struct compat_ebt_entry_mwt *mwt, size_kern = wt->targetsize; module_put(wt->me); break; + + default: + return -EINVAL; } state->buf_kern_offset += match_size + off; -- cgit v1.2.3 From e9cdd343a5e42c43bcda01e609fa23089e026470 Mon Sep 17 00:00:00 2001 From: Boris Ostrovsky Date: Thu, 26 May 2011 11:19:52 -0400 Subject: x86, amd: Do not enable ARAT feature on AMD processors below family 0x12 Commit b87cf80af3ba4b4c008b4face3c68d604e1715c6 added support for ARAT (Always Running APIC timer) on AMD processors that are not affected by erratum 400. This erratum is present on certain processor families and prevents APIC timer from waking up the CPU when it is in a deep C state, including C1E state. Determining whether a processor is affected by this erratum may have some corner cases and handling these cases is somewhat complicated. In the interest of simplicity we won't claim ARAT support on processor families below 0x12 and will go back to broadcasting timer when going idle. Signed-off-by: Boris Ostrovsky Link: http://lkml.kernel.org/r/1306423192-19774-1-git-send-email-ostr@amd64.org Tested-by: Boris Petkov Cc: Hans Rosenfeld Cc: Andreas Herrmann Cc: Chuck Ebbert Cc: stable@kernel.org # 32.x, 38.x, 39.x Signed-off-by: H. Peter Anvin --- arch/x86/kernel/cpu/amd.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 8f5cabb3c5b0..b13ed393dfce 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -612,8 +612,11 @@ static void __cpuinit init_amd(struct cpuinfo_x86 *c) } #endif - /* As a rule processors have APIC timer running in deep C states */ - if (c->x86 > 0xf && !cpu_has_amd_erratum(amd_erratum_400)) + /* + * Family 0x12 and above processors have APIC timer + * running in deep C states. + */ + if (c->x86 > 0x11) set_cpu_cap(c, X86_FEATURE_ARAT); /* -- cgit v1.2.3 From fa2989f4473413a86890066aa3a5676a53b541e4 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Thu, 26 May 2011 10:01:59 +0400 Subject: CIFS: Use pid saved from cifsFileInfo in writepages and set_file_size We need it to make them work with mandatory locking style because we can fail in a situation like when kernel need to flush dirty pages and there is a lock held by a process who opened file. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/cifsglob.h | 8 ++++++++ fs/cifs/cifsproto.h | 13 +++++-------- fs/cifs/cifssmb.c | 33 ++++++++++++++++++++++++++------- fs/cifs/dir.c | 18 ++++++++++-------- fs/cifs/file.c | 31 +++++++++++++++++++++---------- fs/cifs/inode.c | 24 ++++++++++++++++++------ fs/cifs/link.c | 12 ++++++++---- 7 files changed, 96 insertions(+), 43 deletions(-) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index fd877c110e4c..30699d9378e9 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -455,6 +455,14 @@ struct cifsFileInfo { struct work_struct oplock_break; /* work for oplock breaks */ }; +struct cifs_io_parms { + __u16 netfid; + __u32 pid; + __u64 offset; + unsigned int length; + struct cifsTconInfo *tcon; +}; + /* * Take a reference on the file private data. Must be called with * cifs_file_list_lock held. diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 8aea8850ffee..eb3b58d9668f 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -348,15 +348,12 @@ extern int CIFSSMBRead(const int xid, struct cifsTconInfo *tcon, const int netfid, unsigned int count, const __u64 lseek, unsigned int *nbytes, char **buf, int *return_buf_type); -extern int CIFSSMBWrite(const int xid, struct cifsTconInfo *tcon, - const int netfid, const unsigned int count, - const __u64 lseek, unsigned int *nbytes, - const char *buf, const char __user *ubuf, +extern int CIFSSMBWrite(const int xid, struct cifs_io_parms *io_parms, + unsigned int *nbytes, const char *buf, + const char __user *ubuf, const int long_op); +extern int CIFSSMBWrite2(const int xid, struct cifs_io_parms *io_parms, + unsigned int *nbytes, struct kvec *iov, const int nvec, const int long_op); -extern int CIFSSMBWrite2(const int xid, struct cifsTconInfo *tcon, - const int netfid, const unsigned int count, - const __u64 offset, unsigned int *nbytes, - struct kvec *iov, const int nvec, const int long_op); extern int CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon, const unsigned char *searchName, __u64 *inode_number, const struct nls_table *nls_codepage, diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 136df013b0aa..f39fa08b9b0e 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1487,9 +1487,8 @@ CIFSSMBRead(const int xid, struct cifsTconInfo *tcon, const int netfid, int -CIFSSMBWrite(const int xid, struct cifsTconInfo *tcon, - const int netfid, const unsigned int count, - const __u64 offset, unsigned int *nbytes, const char *buf, +CIFSSMBWrite(const int xid, struct cifs_io_parms *io_parms, + unsigned int *nbytes, const char *buf, const char __user *ubuf, const int long_op) { int rc = -EACCES; @@ -1498,6 +1497,11 @@ CIFSSMBWrite(const int xid, struct cifsTconInfo *tcon, int bytes_returned, wct; __u32 bytes_sent; __u16 byte_count; + __u32 pid = io_parms->pid; + __u16 netfid = io_parms->netfid; + __u64 offset = io_parms->offset; + struct cifsTconInfo *tcon = io_parms->tcon; + unsigned int count = io_parms->length; *nbytes = 0; @@ -1519,6 +1523,10 @@ CIFSSMBWrite(const int xid, struct cifsTconInfo *tcon, (void **) &pSMBr); if (rc) return rc; + + pSMB->hdr.Pid = cpu_to_le16((__u16)pid); + pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid >> 16)); + /* tcon and ses pointer are checked in smb_init */ if (tcon->ses->server == NULL) return -ECONNABORTED; @@ -1778,6 +1786,9 @@ cifs_async_writev(struct cifs_writedata *wdata) goto async_writev_out; } + smb->hdr.Pid = cpu_to_le16((__u16)wdata->cfile->pid); + smb->hdr.PidHigh = cpu_to_le16((__u16)(wdata->cfile->pid >> 16)); + smb->AndXCommand = 0xFF; /* none */ smb->Fid = wdata->cfile->netfid; smb->OffsetLow = cpu_to_le32(wdata->offset & 0xFFFFFFFF); @@ -1841,16 +1852,20 @@ async_writev_out: } int -CIFSSMBWrite2(const int xid, struct cifsTconInfo *tcon, - const int netfid, const unsigned int count, - const __u64 offset, unsigned int *nbytes, struct kvec *iov, - int n_vec, const int long_op) +CIFSSMBWrite2(const int xid, struct cifs_io_parms *io_parms, + unsigned int *nbytes, struct kvec *iov, int n_vec, + const int long_op) { int rc = -EACCES; WRITE_REQ *pSMB = NULL; int wct; int smb_hdr_len; int resp_buf_type = 0; + __u32 pid = io_parms->pid; + __u16 netfid = io_parms->netfid; + __u64 offset = io_parms->offset; + struct cifsTconInfo *tcon = io_parms->tcon; + unsigned int count = io_parms->length; *nbytes = 0; @@ -1868,6 +1883,10 @@ CIFSSMBWrite2(const int xid, struct cifsTconInfo *tcon, rc = small_smb_init(SMB_COM_WRITE_ANDX, wct, tcon, (void **) &pSMB); if (rc) return rc; + + pSMB->hdr.Pid = cpu_to_le16((__u16)pid); + pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid >> 16)); + /* tcon and ses pointer are checked in smb_init */ if (tcon->ses->server == NULL) return -ECONNABORTED; diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 9ea65cf36714..0521492f5b3b 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -357,6 +357,7 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode, struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; struct cifsTconInfo *pTcon; + struct cifs_io_parms io_parms; char *full_path = NULL; struct inode *newinode = NULL; int oplock = 0; @@ -439,16 +440,19 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode, * timestamps in, but we can reuse it safely */ pdev = (struct win_dev *)buf; + io_parms.netfid = fileHandle; + io_parms.pid = current->tgid; + io_parms.tcon = pTcon; + io_parms.offset = 0; + io_parms.length = sizeof(struct win_dev); if (S_ISCHR(mode)) { memcpy(pdev->type, "IntxCHR", 8); pdev->major = cpu_to_le64(MAJOR(device_number)); pdev->minor = cpu_to_le64(MINOR(device_number)); - rc = CIFSSMBWrite(xid, pTcon, - fileHandle, - sizeof(struct win_dev), - 0, &bytes_written, (char *)pdev, + rc = CIFSSMBWrite(xid, &io_parms, + &bytes_written, (char *)pdev, NULL, 0); } else if (S_ISBLK(mode)) { memcpy(pdev->type, "IntxBLK", 8); @@ -456,10 +460,8 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode, cpu_to_le64(MAJOR(device_number)); pdev->minor = cpu_to_le64(MINOR(device_number)); - rc = CIFSSMBWrite(xid, pTcon, - fileHandle, - sizeof(struct win_dev), - 0, &bytes_written, (char *)pdev, + rc = CIFSSMBWrite(xid, &io_parms, + &bytes_written, (char *)pdev, NULL, 0); } /* else if (S_ISFIFO) */ CIFSSMBClose(xid, pTcon, fileHandle); diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 00b926ce7935..dfc0d35b1470 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -857,7 +857,7 @@ cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset, cifsi->server_eof = end_of_write; } -static ssize_t cifs_write(struct cifsFileInfo *open_file, +static ssize_t cifs_write(struct cifsFileInfo *open_file, __u32 pid, const char *write_data, size_t write_size, loff_t *poffset) { @@ -869,6 +869,7 @@ static ssize_t cifs_write(struct cifsFileInfo *open_file, int xid; struct dentry *dentry = open_file->dentry; struct cifsInodeInfo *cifsi = CIFS_I(dentry->d_inode); + struct cifs_io_parms io_parms; cifs_sb = CIFS_SB(dentry->d_sb); @@ -901,8 +902,13 @@ static ssize_t cifs_write(struct cifsFileInfo *open_file, /* iov[0] is reserved for smb header */ iov[1].iov_base = (char *)write_data + total_written; iov[1].iov_len = len; - rc = CIFSSMBWrite2(xid, pTcon, open_file->netfid, len, - *poffset, &bytes_written, iov, 1, 0); + io_parms.netfid = open_file->netfid; + io_parms.pid = pid; + io_parms.tcon = pTcon; + io_parms.offset = *poffset; + io_parms.length = len; + rc = CIFSSMBWrite2(xid, &io_parms, &bytes_written, iov, + 1, 0); } if (rc || (bytes_written == 0)) { if (total_written) @@ -1071,8 +1077,8 @@ static int cifs_partialpagewrite(struct page *page, unsigned from, unsigned to) open_file = find_writable_file(CIFS_I(mapping->host), false); if (open_file) { - bytes_written = cifs_write(open_file, write_data, - to - from, &offset); + bytes_written = cifs_write(open_file, open_file->pid, + write_data, to - from, &offset); cifsFileInfo_put(open_file); /* Does mm or vfs already set times? */ inode->i_atime = inode->i_mtime = current_fs_time(inode->i_sb); @@ -1363,8 +1369,8 @@ static int cifs_write_end(struct file *file, struct address_space *mapping, /* BB check if anything else missing out of ppw such as updating last write time */ page_data = kmap(page); - rc = cifs_write(file->private_data, page_data + offset, - copied, &pos); + rc = cifs_write(file->private_data, current->tgid, + page_data + offset, copied, &pos); /* if (rc < 0) should we set writebehind rc? */ kunmap(page); @@ -1515,6 +1521,7 @@ cifs_iovec_write(struct file *file, const struct iovec *iov, struct cifsFileInfo *open_file; struct cifsTconInfo *pTcon; struct cifs_sb_info *cifs_sb; + struct cifs_io_parms io_parms; int xid, rc; len = iov_length(iov, nr_segs); @@ -1573,9 +1580,13 @@ cifs_iovec_write(struct file *file, const struct iovec *iov, if (rc != 0) break; } - rc = CIFSSMBWrite2(xid, pTcon, open_file->netfid, - cur_len, *poffset, &written, - to_send, npages, 0); + io_parms.netfid = open_file->netfid; + io_parms.pid = current->tgid; + io_parms.tcon = pTcon; + io_parms.offset = *poffset; + io_parms.length = cur_len; + rc = CIFSSMBWrite2(xid, &io_parms, &written, to_send, + npages, 0); } while (rc == -EAGAIN); for (i = 0; i < npages; i++) diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index de02ed5e25c2..5e278d37912b 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1873,6 +1873,7 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs, struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct tcon_link *tlink = NULL; struct cifsTconInfo *pTcon = NULL; + struct cifs_io_parms io_parms; /* * To avoid spurious oplock breaks from server, in the case of @@ -1894,8 +1895,14 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs, cFYI(1, "SetFSize for attrs rc = %d", rc); if ((rc == -EINVAL) || (rc == -EOPNOTSUPP)) { unsigned int bytes_written; - rc = CIFSSMBWrite(xid, pTcon, nfid, 0, attrs->ia_size, - &bytes_written, NULL, NULL, 1); + + io_parms.netfid = nfid; + io_parms.pid = npid; + io_parms.tcon = pTcon; + io_parms.offset = 0; + io_parms.length = attrs->ia_size; + rc = CIFSSMBWrite(xid, &io_parms, &bytes_written, + NULL, NULL, 1); cFYI(1, "Wrt seteof rc %d", rc); } } else @@ -1930,10 +1937,15 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs, CIFS_MOUNT_MAP_SPECIAL_CHR); if (rc == 0) { unsigned int bytes_written; - rc = CIFSSMBWrite(xid, pTcon, netfid, 0, - attrs->ia_size, - &bytes_written, NULL, - NULL, 1); + + io_parms.netfid = netfid; + io_parms.pid = current->tgid; + io_parms.tcon = pTcon; + io_parms.offset = 0; + io_parms.length = attrs->ia_size; + rc = CIFSSMBWrite(xid, &io_parms, + &bytes_written, + NULL, NULL, 1); cFYI(1, "wrt seteof rc %d", rc); CIFSSMBClose(xid, pTcon, netfid); } diff --git a/fs/cifs/link.c b/fs/cifs/link.c index ce417a9764a3..1a6a388cf5d8 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -184,6 +184,7 @@ CIFSCreateMFSymLink(const int xid, struct cifsTconInfo *tcon, __u16 netfid = 0; u8 *buf; unsigned int bytes_written = 0; + struct cifs_io_parms io_parms; buf = kmalloc(CIFS_MF_SYMLINK_FILE_SIZE, GFP_KERNEL); if (!buf) @@ -203,10 +204,13 @@ CIFSCreateMFSymLink(const int xid, struct cifsTconInfo *tcon, return rc; } - rc = CIFSSMBWrite(xid, tcon, netfid, - CIFS_MF_SYMLINK_FILE_SIZE /* length */, - 0 /* offset */, - &bytes_written, buf, NULL, 0); + io_parms.netfid = netfid; + io_parms.pid = current->tgid; + io_parms.tcon = tcon; + io_parms.offset = 0; + io_parms.length = CIFS_MF_SYMLINK_FILE_SIZE; + + rc = CIFSSMBWrite(xid, &io_parms, &bytes_written, buf, NULL, 0); CIFSSMBClose(xid, tcon, netfid); kfree(buf); if (rc != 0) -- cgit v1.2.3 From fd0daf9d58f6b3342d07c5f6bbfb304dbe5db4ec Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micha=C5=82=20Miros=C5=82aw?= Date: Thu, 26 May 2011 00:42:57 +0000 Subject: net: fix ETHTOOL_SFEATURES compatibility with old ethtool_ops.set_flags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Current code squashes flags to bool - this makes set_flags fail whenever some ETH_FLAG_* equivalent features are set. Fix this. Signed-off-by: MichaÅ‚ MirosÅ‚aw Signed-off-by: David S. Miller --- net/core/ethtool.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/net/core/ethtool.c b/net/core/ethtool.c index 84e7304532e6..fd14116ad7f0 100644 --- a/net/core/ethtool.c +++ b/net/core/ethtool.c @@ -233,6 +233,29 @@ static int ethtool_set_feature_compat(struct net_device *dev, return 1; } +static int ethtool_set_flags_compat(struct net_device *dev, + int (*legacy_set)(struct net_device *, u32), + struct ethtool_set_features_block *features, u32 mask) +{ + u32 value; + + if (!legacy_set) + return 0; + + if (!(features[0].valid & mask)) + return 0; + + value = dev->features & ~features[0].valid; + value |= features[0].requested; + + features[0].valid &= ~mask; + + if (legacy_set(dev, value & mask) < 0) + netdev_info(dev, "Legacy flags change failed\n"); + + return 1; +} + static int ethtool_set_features_compat(struct net_device *dev, struct ethtool_set_features_block *features) { @@ -249,7 +272,7 @@ static int ethtool_set_features_compat(struct net_device *dev, features, NETIF_F_ALL_TSO); compat |= ethtool_set_feature_compat(dev, dev->ethtool_ops->set_rx_csum, features, NETIF_F_RXCSUM); - compat |= ethtool_set_feature_compat(dev, dev->ethtool_ops->set_flags, + compat |= ethtool_set_flags_compat(dev, dev->ethtool_ops->set_flags, features, flags_dup_features); return compat; -- cgit v1.2.3 From 12e6c419b48c4d1803918e5d952ebee07bae7465 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 26 May 2011 04:57:53 +0000 Subject: can: convert to %pK for kptr_restrict support As these pointers have been printed without using %p they were missed in the big network kptr_restrict conversion patch %p -> %pK from Dan Rosenberg. Signed-off-by: Oliver Hartkopp Signed-off-by: David S. Miller --- net/can/proc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/can/proc.c b/net/can/proc.c index f4265cc9c3fb..0016f7339699 100644 --- a/net/can/proc.c +++ b/net/can/proc.c @@ -204,12 +204,11 @@ static void can_print_rcvlist(struct seq_file *m, struct hlist_head *rx_list, hlist_for_each_entry_rcu(r, n, rx_list, list) { char *fmt = (r->can_id & CAN_EFF_FLAG)? - " %-5s %08X %08x %08x %08x %8ld %s\n" : - " %-5s %03X %08x %08lx %08lx %8ld %s\n"; + " %-5s %08x %08x %pK %pK %8ld %s\n" : + " %-5s %03x %08x %pK %pK %8ld %s\n"; seq_printf(m, fmt, DNAME(dev), r->can_id, r->mask, - (unsigned long)r->func, (unsigned long)r->data, - r->matches, r->ident); + r->func, r->data, r->matches, r->ident); } } -- cgit v1.2.3 From 240b26284ac84f06ed0bc89c363f022e21b84b98 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 26 May 2011 04:37:32 +0000 Subject: net: davinci_emac: fix dev_err use at probe Use platform device rather than net device in dev_err calls before net device has been registered to avoid messages such as (null): DaVinci EMAC: Failed to get EMAC clock Also replace remaining printks in probe with dev_{err,warn}. Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/davinci_emac.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c index 807b6bb200eb..29a4f06fbfcf 100644 --- a/drivers/net/davinci_emac.c +++ b/drivers/net/davinci_emac.c @@ -1772,7 +1772,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) /* obtain emac clock from kernel */ emac_clk = clk_get(&pdev->dev, NULL); if (IS_ERR(emac_clk)) { - printk(KERN_ERR "DaVinci EMAC: Failed to get EMAC clock\n"); + dev_err(&pdev->dev, "failed to get EMAC clock\n"); return -EBUSY; } emac_bus_frequency = clk_get_rate(emac_clk); @@ -1780,7 +1780,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) ndev = alloc_etherdev(sizeof(struct emac_priv)); if (!ndev) { - printk(KERN_ERR "DaVinci EMAC: Error allocating net_device\n"); + dev_err(&pdev->dev, "error allocating net_device\n"); clk_put(emac_clk); return -ENOMEM; } @@ -1795,7 +1795,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; if (!pdata) { - printk(KERN_ERR "DaVinci EMAC: No platform data\n"); + dev_err(&pdev->dev, "no platform data\n"); return -ENODEV; } @@ -1814,7 +1814,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) /* Get EMAC platform data */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { - dev_err(emac_dev, "DaVinci EMAC: Error getting res\n"); + dev_err(&pdev->dev,"error getting res\n"); rc = -ENOENT; goto probe_quit; } @@ -1822,14 +1822,14 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) priv->emac_base_phys = res->start + pdata->ctrl_reg_offset; size = res->end - res->start + 1; if (!request_mem_region(res->start, size, ndev->name)) { - dev_err(emac_dev, "DaVinci EMAC: failed request_mem_region() for regs\n"); + dev_err(&pdev->dev, "failed request_mem_region() for regs\n"); rc = -ENXIO; goto probe_quit; } priv->remap_addr = ioremap(res->start, size); if (!priv->remap_addr) { - dev_err(emac_dev, "Unable to map IO\n"); + dev_err(&pdev->dev, "unable to map IO\n"); rc = -ENOMEM; release_mem_region(res->start, size); goto probe_quit; @@ -1863,7 +1863,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) priv->dma = cpdma_ctlr_create(&dma_params); if (!priv->dma) { - dev_err(emac_dev, "DaVinci EMAC: Error initializing DMA\n"); + dev_err(&pdev->dev, "error initializing DMA\n"); rc = -ENOMEM; goto no_dma; } @@ -1879,7 +1879,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!res) { - dev_err(emac_dev, "DaVinci EMAC: Error getting irq res\n"); + dev_err(&pdev->dev, "error getting irq res\n"); rc = -ENOENT; goto no_irq_res; } @@ -1888,8 +1888,8 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) if (!is_valid_ether_addr(priv->mac_addr)) { /* Use random MAC if none passed */ random_ether_addr(priv->mac_addr); - printk(KERN_WARNING "%s: using random MAC addr: %pM\n", - __func__, priv->mac_addr); + dev_warn(&pdev->dev, "using random MAC addr: %pM\n", + priv->mac_addr); } ndev->netdev_ops = &emac_netdev_ops; @@ -1902,7 +1902,7 @@ static int __devinit davinci_emac_probe(struct platform_device *pdev) SET_NETDEV_DEV(ndev, &pdev->dev); rc = register_netdev(ndev); if (rc) { - dev_err(emac_dev, "DaVinci EMAC: Error in register_netdev\n"); + dev_err(&pdev->dev, "error in register_netdev\n"); rc = -ENODEV; goto netdev_reg_err; } -- cgit v1.2.3 From 6848b7334b24b47aa3d0e70342ff839ffa95d5fa Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 26 May 2011 18:38:54 +0000 Subject: [CIFS] When mandatory encryption on share, fail mount When mandatory encryption is configured in samba server on a share (smb.conf parameter "smb encrypt = mandatory") the server will hang up the tcp session when we try to send the first frame after the tree connect if it is not a QueryFSUnixInfo, this causes cifs mount to hang (it must be killed with ctl-c). Move the QueryFSUnixInfo call earlier in the mount sequence, and check whether the SetFSUnixInfo fails due to mandatory encryption so we can return a sensible error (EACCES) on mount. In a future patch (for 2.6.40) we will support mandatory encryption. CC: Stable Reviewed-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/connect.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 2e7a79cd2b93..581654fb174d 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2530,7 +2530,7 @@ void reset_cifs_unix_caps(int xid, struct cifsTconInfo *tcon, if (!CIFSSMBQFSUnixInfo(xid, tcon)) { __u64 cap = le64_to_cpu(tcon->fsUnixInfo.Capability); - + cFYI(1, "unix caps which server supports %lld", cap); /* check for reconnect case in which we do not want to change the mount behavior if we can avoid it */ if (vol_info == NULL) { @@ -2548,6 +2548,9 @@ void reset_cifs_unix_caps(int xid, struct cifsTconInfo *tcon, } } + if (cap & CIFS_UNIX_TRANSPORT_ENCRYPTION_MANDATORY_CAP) + cERROR(1, "per-share encryption not supported yet"); + cap &= CIFS_UNIX_CAP_MASK; if (vol_info && vol_info->no_psx_acl) cap &= ~CIFS_UNIX_POSIX_ACL_CAP; @@ -2596,6 +2599,10 @@ void reset_cifs_unix_caps(int xid, struct cifsTconInfo *tcon, cFYI(1, "very large read cap"); if (cap & CIFS_UNIX_LARGE_WRITE_CAP) cFYI(1, "very large write cap"); + if (cap & CIFS_UNIX_TRANSPORT_ENCRYPTION_CAP) + cFYI(1, "transport encryption cap"); + if (cap & CIFS_UNIX_TRANSPORT_ENCRYPTION_MANDATORY_CAP) + cFYI(1, "mandatory transport encryption cap"); #endif /* CIFS_DEBUG2 */ if (CIFSSMBSetFSUnixInfo(xid, tcon, cap)) { if (vol_info == NULL) { @@ -3022,20 +3029,26 @@ try_mount_again: goto remote_path_check; } - /* do not care if following two calls succeed - informational */ - if (!tcon->ipc) { - CIFSSMBQFSDeviceInfo(xid, tcon); - CIFSSMBQFSAttributeInfo(xid, tcon); - } - /* tell server which Unix caps we support */ - if (tcon->ses->capabilities & CAP_UNIX) + if (tcon->ses->capabilities & CAP_UNIX) { /* reset of caps checks mount to see if unix extensions disabled for just this mount */ reset_cifs_unix_caps(xid, tcon, sb, volume_info); - else + if ((tcon->ses->server->tcpStatus == CifsNeedReconnect) && + (le64_to_cpu(tcon->fsUnixInfo.Capability) & + CIFS_UNIX_TRANSPORT_ENCRYPTION_MANDATORY_CAP)) { + rc = -EACCES; + goto mount_fail_check; + } + } else tcon->unix_ext = 0; /* server does not support them */ + /* do not care if following two calls succeed - informational */ + if (!tcon->ipc) { + CIFSSMBQFSDeviceInfo(xid, tcon); + CIFSSMBQFSAttributeInfo(xid, tcon); + } + /* convert forward to back slashes in prepath here if needed */ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) convert_delimiter(cifs_sb->prepath, CIFS_DIR_SEP(cifs_sb)); -- cgit v1.2.3 From cc780af5aca00d573eae0e926e1d4cf1439b580e Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 26 May 2011 19:50:30 +0100 Subject: ARM: kill pmd_off() pmd_off() has only one user, so lets consolidate this into its only user. Signed-off-by: Russell King --- arch/arm/mm/mm.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index d2384106af9c..5b3d7d543659 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -5,14 +5,9 @@ extern pmd_t *top_pmd; #define TOP_PTE(x) pte_offset_kernel(top_pmd, x) -static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) -{ - return pmd_offset(pud_offset(pgd, virt), virt); -} - static inline pmd_t *pmd_off_k(unsigned long virt) { - return pmd_off(pgd_offset_k(virt), virt); + return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt); } struct mem_type { -- cgit v1.2.3 From da7c06c4a773b7903d3c09a25edbcb20bdc4af22 Mon Sep 17 00:00:00 2001 From: Justin Mattock Date: Mon, 23 May 2011 20:43:48 +0000 Subject: net:8021q:vlan.c Fix pr_info to just give the vlan fullname and version. The below patch removes vlan_buggyright and vlan_copyright from vlan_proto_init, so that it prints out just the fullname of vlan and the version number. before: [ 30.438203] 802.1Q VLAN Support v1.8 Ben Greear [ 30.441542] All bugs added by David S. Miller after: [ 31.513910] 802.1Q VLAN Support v1.8 Signed-off-by: Justin P. Mattock CC: Joe Perches CC: David S. Miller CC: Ben Greear Signed-off-by: David S. Miller --- net/8021q/vlan.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index b2274d1fd605..c7a581a96894 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -46,8 +46,6 @@ int vlan_net_id __read_mostly; const char vlan_fullname[] = "802.1Q VLAN Support"; const char vlan_version[] = DRV_VERSION; -static const char vlan_copyright[] = "Ben Greear "; -static const char vlan_buggyright[] = "David S. Miller "; /* End of global variables definitions. */ @@ -673,8 +671,7 @@ static int __init vlan_proto_init(void) { int err; - pr_info("%s v%s %s\n", vlan_fullname, vlan_version, vlan_copyright); - pr_info("All bugs added by %s\n", vlan_buggyright); + pr_info("%s v%s\n", vlan_fullname, vlan_version); err = register_pernet_subsys(&vlan_net_ops); if (err < 0) -- cgit v1.2.3 From 90e62474fd08e16ba5309886c801243b0eb782f3 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Wed, 25 May 2011 04:41:59 +0000 Subject: bonding: cleanup module option descriptions Weiping Pan noticed that the module option description for xmit_hash_policy was incorrect and was nice enough to post a patch to fix it. The text was correct, but created a line over 80 characters and I would rather not add those. I realized I could take a few minutes and clean up all the descriptions and things would look much better. This is the result. Based on patch from Weiping Pan . Signed-off-by: Andy Gospodarek CC: Weiping Pan Reviewed-by: Weiping Pan Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 34 ++++++++++++++++++++++------------ 1 file changed, 22 insertions(+), 12 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 6141667c5fb7..17b4dd94da90 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -113,9 +113,11 @@ MODULE_PARM_DESC(max_bonds, "Max number of bonded devices"); module_param(tx_queues, int, 0); MODULE_PARM_DESC(tx_queues, "Max number of transmit queues (default = 16)"); module_param_named(num_grat_arp, num_peer_notif, int, 0644); -MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on failover event (alias of num_unsol_na)"); +MODULE_PARM_DESC(num_grat_arp, "Number of peer notifications to send on " + "failover event (alias of num_unsol_na)"); module_param_named(num_unsol_na, num_peer_notif, int, 0644); -MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on failover event (alias of num_grat_arp)"); +MODULE_PARM_DESC(num_unsol_na, "Number of peer notifications to send on " + "failover event (alias of num_grat_arp)"); module_param(miimon, int, 0); MODULE_PARM_DESC(miimon, "Link check interval in milliseconds"); module_param(updelay, int, 0); @@ -127,7 +129,7 @@ module_param(use_carrier, int, 0); MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; " "0 for off, 1 for on (default)"); module_param(mode, charp, 0); -MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, " +MODULE_PARM_DESC(mode, "Mode of operation; 0 for balance-rr, " "1 for active-backup, 2 for balance-xor, " "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, " "6 for balance-alb"); @@ -142,27 +144,35 @@ MODULE_PARM_DESC(primary_reselect, "Reselect primary slave " "2 for only on active slave " "failure"); module_param(lacp_rate, charp, 0); -MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner " - "(slow/fast)"); +MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner; " + "0 for slow, 1 for fast"); module_param(ad_select, charp, 0); -MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2)"); +MODULE_PARM_DESC(ad_select, "803.ad aggregation selection logic; " + "0 for stable (default), 1 for bandwidth, " + "2 for count"); module_param(xmit_hash_policy, charp, 0); -MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)" - ", 1 for layer 3+4"); +MODULE_PARM_DESC(xmit_hash_policy, "balance-xor and 802.3ad hashing method; " + "0 for layer 2 (default), 1 for layer 3+4, " + "2 for layer 2+3"); module_param(arp_interval, int, 0); MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds"); module_param_array(arp_ip_target, charp, NULL, 0); MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form"); module_param(arp_validate, charp, 0); -MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes: none (default), active, backup or all"); +MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes; " + "0 for none (default), 1 for active, " + "2 for backup, 3 for all"); module_param(fail_over_mac, charp, 0); -MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to the same MAC. none (default), active or follow"); +MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to " + "the same MAC; 0 for none (default), " + "1 for active, 2 for follow"); module_param(all_slaves_active, int, 0); MODULE_PARM_DESC(all_slaves_active, "Keep all frames received on an interface" - "by setting active flag for all slaves. " + "by setting active flag for all slaves; " "0 for never (default), 1 for always."); module_param(resend_igmp, int, 0); -MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on link failure"); +MODULE_PARM_DESC(resend_igmp, "Number of IGMP membership reports to send on " + "link failure"); /*----------------------------- Global variables ----------------------------*/ -- cgit v1.2.3 From 86e4ca66e81bba0f8640f1fa19b8b8f72cbd0561 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 26 May 2011 15:00:31 -0400 Subject: bug.h: Move ratelimit warn interfaces to ratelimit.h As reported by Ingo Molnar, we still have configuration combinations where use of the WARN_RATELIMIT interfaces break the build because dependencies don't get met. Instead of going down the long road of trying to make it so that ratelimit.h can get included by kernel.h or asm-generic/bug.h, just move the interface into ratelimit.h and make users have to include that. Reported-by: Ingo Molnar Signed-off-by: David S. Miller Acked-by: Randy Dunlap --- include/asm-generic/bug.h | 40 ---------------------------------------- include/linux/ratelimit.h | 40 ++++++++++++++++++++++++++++++++++++++++ net/core/filter.c | 1 + 3 files changed, 41 insertions(+), 40 deletions(-) diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index 91784841e407..dfb0ec666c94 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -162,46 +162,6 @@ extern void warn_slowpath_null(const char *file, const int line); unlikely(__ret_warn_once); \ }) -#ifdef CONFIG_PRINTK - -#define WARN_ON_RATELIMIT(condition, state) \ - WARN_ON((condition) && __ratelimit(state)) - -#define __WARN_RATELIMIT(condition, state, format...) \ -({ \ - int rtn = 0; \ - if (unlikely(__ratelimit(state))) \ - rtn = WARN(condition, format); \ - rtn; \ -}) - -#define WARN_RATELIMIT(condition, format...) \ -({ \ - static DEFINE_RATELIMIT_STATE(_rs, \ - DEFAULT_RATELIMIT_INTERVAL, \ - DEFAULT_RATELIMIT_BURST); \ - __WARN_RATELIMIT(condition, &_rs, format); \ -}) - -#else - -#define WARN_ON_RATELIMIT(condition, state) \ - WARN_ON(condition) - -#define __WARN_RATELIMIT(condition, state, format...) \ -({ \ - int rtn = WARN(condition, format); \ - rtn; \ -}) - -#define WARN_RATELIMIT(condition, format...) \ -({ \ - int rtn = WARN(condition, format); \ - rtn; \ -}) - -#endif - /* * WARN_ON_SMP() is for cases that the warning is either * meaningless for !SMP or may even cause failures. diff --git a/include/linux/ratelimit.h b/include/linux/ratelimit.h index 03ff67b0cdf5..2f007157fab9 100644 --- a/include/linux/ratelimit.h +++ b/include/linux/ratelimit.h @@ -41,4 +41,44 @@ extern struct ratelimit_state printk_ratelimit_state; extern int ___ratelimit(struct ratelimit_state *rs, const char *func); #define __ratelimit(state) ___ratelimit(state, __func__) +#ifdef CONFIG_PRINTK + +#define WARN_ON_RATELIMIT(condition, state) \ + WARN_ON((condition) && __ratelimit(state)) + +#define __WARN_RATELIMIT(condition, state, format...) \ +({ \ + int rtn = 0; \ + if (unlikely(__ratelimit(state))) \ + rtn = WARN(condition, format); \ + rtn; \ +}) + +#define WARN_RATELIMIT(condition, format...) \ +({ \ + static DEFINE_RATELIMIT_STATE(_rs, \ + DEFAULT_RATELIMIT_INTERVAL, \ + DEFAULT_RATELIMIT_BURST); \ + __WARN_RATELIMIT(condition, &_rs, format); \ +}) + +#else + +#define WARN_ON_RATELIMIT(condition, state) \ + WARN_ON(condition) + +#define __WARN_RATELIMIT(condition, state, format...) \ +({ \ + int rtn = WARN(condition, format); \ + rtn; \ +}) + +#define WARN_RATELIMIT(condition, format...) \ +({ \ + int rtn = WARN(condition, format); \ + rtn; \ +}) + +#endif + #endif /* _LINUX_RATELIMIT_H */ diff --git a/net/core/filter.c b/net/core/filter.c index 0e3622f1dcb1..36f975fa87cb 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -38,6 +38,7 @@ #include #include #include +#include /* No hurry in this branch */ static void *__load_pointer(const struct sk_buff *skb, int k, unsigned int size) -- cgit v1.2.3 From f4fa3424c66255ba1e07b26becfc3d6cab0fdf65 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Thu, 26 May 2011 21:01:38 +0200 Subject: block: fix oops on !disk->queue and sysfs discard alignment display Eric Dumazet reports: ---- At boot, I have a crash in part_discard_alignment_show+0x1b/0x50 CR2 : 000006ac fault in : mov 0x2c(%rcx),%edx I suspect commit 23ceb5b7719e9276d4 (block: Remove extra discard_alignment from hd_struct) being in fault ---- Not quite known how ->queue can be NULL while the sysfs entry exists, but lets play it safe and check for a NULL queue. The rest of the sysfs show strategies in check.c do not dereference disk->queue. Reported-by: Eric Dumazet Signed-off-by: Jens Axboe --- fs/partitions/check.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index 8ed4d3433199..f82e762eeca2 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -256,10 +256,12 @@ ssize_t part_discard_alignment_show(struct device *dev, { struct hd_struct *p = dev_to_part(dev); struct gendisk *disk = dev_to_disk(dev); + unsigned int alignment = 0; - return sprintf(buf, "%u\n", - queue_limit_discard_alignment(&disk->queue->limits, - p->start_sect)); + if (disk->queue) + alignment = queue_limit_discard_alignment(&disk->queue->limits, + p->start_sect); + return sprintf(buf, "%u\n", alignment); } ssize_t part_stat_show(struct device *dev, -- cgit v1.2.3 From a2cba2913c7623789296e39d787b01031f9c7969 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 26 May 2011 21:06:50 +0200 Subject: brd: get rid of unused members from struct brd_device brd_refcnt, brd_offset, brd_sizelimit and brd_blocksize in struct brd_device seem to be copied from struct loop_device but they're not used anywhere. Let get rid of them. Signed-off-by: Namhyung Kim Signed-off-by: Jens Axboe --- drivers/block/brd.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/block/brd.c b/drivers/block/brd.c index b7f51e4594f8..bae9a3d4e15b 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -35,10 +35,6 @@ */ struct brd_device { int brd_number; - int brd_refcnt; - loff_t brd_offset; - loff_t brd_sizelimit; - unsigned brd_blocksize; struct request_queue *brd_queue; struct gendisk *brd_disk; -- cgit v1.2.3 From 315980c8688c4b06713c1a5fe9d64cdf8ab57a72 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 26 May 2011 21:06:50 +0200 Subject: brd: limit 'max_part' module param to DISK_MAX_PARTS The 'max_part' parameter controls the number of maximum partition a brd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel panic (or, at least, produce invalid device nodes in some cases). On my desktop system, following command kills the kernel. On qemu, it triggers similar oops but the kernel was alive: $ sudo modprobe brd max_part=100000 BUG: unable to handle kernel NULL pointer dereference at 0000000000000058 IP: [] sysfs_create_dir+0x2d/0xae PGD 7af1067 PUD 7b19067 PMD 0 Oops: 0000 [#1] SMP last sysfs file: CPU 0 Modules linked in: brd(+) Pid: 44, comm: insmod Tainted: G W 2.6.39-qemu+ #158 Bochs Bochs RIP: 0010:[] [] sysfs_create_dir+0x2d/0xae RSP: 0018:ffff880007b15d78 EFLAGS: 00000286 RAX: ffff880007b05478 RBX: ffff880007a52760 RCX: ffff880007b15dc8 RDX: ffff880007a4f900 RSI: ffff880007b15e48 RDI: ffff880007a52760 RBP: ffff880007b15da8 R08: 0000000000000002 R09: 0000000000000000 R10: ffff880007b15e48 R11: ffff880007b05478 R12: 0000000000000000 R13: ffff880007b05478 R14: 0000000000400920 R15: 0000000000000063 FS: 0000000002160880(0063) GS:ffff880007c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000058 CR3: 0000000007b1c000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 Process insmod (pid: 44, threadinfo ffff880007b14000, task ffff880007acb980) Stack: ffff880007b15dc8 ffff880007b05478 ffff880007b15da8 00000000fffffffe ffff880007a52760 ffff880007b05478 ffff880007b15de8 ffffffff81143c0a 0000000000400920 ffff880007a52760 ffff880007b05478 0000000000000000 Call Trace: [] kobject_add_internal+0xdf/0x1a0 [] kobject_add_varg+0x41/0x50 [] kobject_add+0x64/0x66 [] blk_register_queue+0x5f/0xb8 [] add_disk+0xdf/0x289 [] brd_init+0xdf/0x1aa [brd] [] ? 0xffffffffa0003fff [] ? 0xffffffffa0003fff [] do_one_initcall+0x7a/0x12e [] sys_init_module+0x9c/0x1dc [] system_call_fastpath+0x16/0x1b Code: 89 e5 41 55 41 54 53 48 89 fb 48 83 ec 18 48 85 ff 75 04 0f 0b eb fe 48 8b 47 18 49 c7 c4 70 1e 4d 81 48 85 c0 74 04 4c 8b 60 30 8b 44 24 58 45 31 ed 0f b6 c4 85 c0 74 0d 48 8b 43 28 48 89 RIP [] sysfs_create_dir+0x2d/0xae RSP CR2: 0000000000000058 ---[ end trace aebb1175ce1f6739 ]--- Signed-off-by: Namhyung Kim Cc: Laurent Vivier Cc: stable@kernel.org Signed-off-by: Jens Axboe --- drivers/block/brd.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/block/brd.c b/drivers/block/brd.c index bae9a3d4e15b..e9a19d99f928 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -581,6 +581,9 @@ static int __init brd_init(void) if (max_part > 0) part_shift = fls(max_part); + if ((1UL << part_shift) > DISK_MAX_PARTS) + return -EINVAL; + if (rd_nr > 1UL << (MINORBITS - part_shift)) return -EINVAL; -- cgit v1.2.3 From af46566885a373b0a526932484cd8fef8de7b598 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 26 May 2011 21:06:50 +0200 Subject: brd: handle on-demand devices correctly When finding or allocating a ram disk device, brd_probe() did not take partition numbers into account so that it can result to a different device. Consider following example (I set CONFIG_BLK_DEV_RAM_COUNT=4 for simplicity) : $ sudo modprobe brd max_part=15 $ ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2011-05-25 15:41 /dev/ram0 brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1 brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2 brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3 $ sudo mknod /dev/ram4 b 1 64 $ sudo dd if=/dev/zero of=/dev/ram4 bs=4k count=256 256+0 records in 256+0 records out 1048576 bytes (1.0 MB) copied, 0.00215578 s, 486 MB/s namhyung@leonhard:linux$ ls -l /dev/ram* brw-rw---- 1 root disk 1, 0 2011-05-25 15:41 /dev/ram0 brw-rw---- 1 root disk 1, 16 2011-05-25 15:41 /dev/ram1 brw-rw---- 1 root disk 1, 32 2011-05-25 15:41 /dev/ram2 brw-rw---- 1 root disk 1, 48 2011-05-25 15:41 /dev/ram3 brw-r--r-- 1 root root 1, 64 2011-05-25 15:45 /dev/ram4 brw-rw---- 1 root disk 1, 1024 2011-05-25 15:44 /dev/ram64 After this patch, /dev/ram4 - instead of /dev/ram64 - was accessed correctly. In addition, 'range' passed to blk_register_region() should include all range of dev_t that RAMDISK_MAJOR can address. It does not need to be limited by partition numbers unless 'rd_nr' param was specified. Signed-off-by: Namhyung Kim Cc: Laurent Vivier Cc: stable@kernel.org Signed-off-by: Jens Axboe --- drivers/block/brd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/block/brd.c b/drivers/block/brd.c index e9a19d99f928..b1efa8f9ff42 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -548,7 +548,7 @@ static struct kobject *brd_probe(dev_t dev, int *part, void *data) struct kobject *kobj; mutex_lock(&brd_devices_mutex); - brd = brd_init_one(dev & MINORMASK); + brd = brd_init_one(MINOR(dev) >> part_shift); kobj = brd ? get_disk(brd->brd_disk) : ERR_PTR(-ENOMEM); mutex_unlock(&brd_devices_mutex); @@ -589,10 +589,10 @@ static int __init brd_init(void) if (rd_nr) { nr = rd_nr; - range = rd_nr; + range = rd_nr << part_shift; } else { nr = CONFIG_BLK_DEV_RAM_COUNT; - range = 1UL << (MINORBITS - part_shift); + range = 1UL << MINORBITS; } if (register_blkdev(RAMDISK_MAJOR, "ramdisk")) @@ -631,7 +631,7 @@ static void __exit brd_exit(void) unsigned long range; struct brd_device *brd, *next; - range = rd_nr ? rd_nr : 1UL << (MINORBITS - part_shift); + range = rd_nr ? rd_nr << part_shift : 1UL << MINORBITS; list_for_each_entry_safe(brd, next, &brd_devices, brd_list) brd_del_one(brd); -- cgit v1.2.3 From 13868b76ab8135389fe1d8cf1c6a4847c9fef0a7 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 26 May 2011 21:06:50 +0200 Subject: brd: fix comment on initial device creation If 'rd_nr' param was not specified, 16 (can be adjusted via CONFIG_BLK_DEV_RAM_COUNT) devices would be created by default but comment said 1. Fix it. Signed-off-by: Namhyung Kim Signed-off-by: Jens Axboe --- drivers/block/brd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/block/brd.c b/drivers/block/brd.c index b1efa8f9ff42..d904d0da2928 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -571,10 +571,10 @@ static int __init brd_init(void) * * (1) if rd_nr is specified, create that many upfront, and this * also becomes a hard limit. - * (2) if rd_nr is not specified, create 1 rd device on module - * load, user can further extend brd device by create dev node - * themselves and have kernel automatically instantiate actual - * device on-demand. + * (2) if rd_nr is not specified, create CONFIG_BLK_DEV_RAM_COUNT + * (default 16) rd device on module load, user can further + * extend brd device by create dev node themselves and have + * kernel automatically instantiate actual device on-demand. */ part_shift = 0; -- cgit v1.2.3 From 8892cbaf686fb18a5f0558b9fd7773b32c0c7852 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Thu, 26 May 2011 21:06:50 +0200 Subject: brd: export module parameters Export 'rd_nr', 'rd_size' and 'max_part' parameters to sysfs so user can know that how many devices are allowed, how big each device is and how many partitions are supported. If 'max_part' is 0, it means simply the device doesn't support partitioning. Also note that 'max_part' can be adjusted to power of 2 minus 1 form if needed. User should check this value after the module loading if he/she want to use that number correctly (i.e. fdisk, mknod, etc.). Signed-off-by: Namhyung Kim Cc: Laurent Vivier Signed-off-by: Jens Axboe --- drivers/block/brd.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/block/brd.c b/drivers/block/brd.c index d904d0da2928..dba1c32e1ddf 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -436,11 +436,11 @@ static int rd_nr; int rd_size = CONFIG_BLK_DEV_RAM_SIZE; static int max_part; static int part_shift; -module_param(rd_nr, int, 0); +module_param(rd_nr, int, S_IRUGO); MODULE_PARM_DESC(rd_nr, "Maximum number of brd devices"); -module_param(rd_size, int, 0); +module_param(rd_size, int, S_IRUGO); MODULE_PARM_DESC(rd_size, "Size of each RAM disk in kbytes."); -module_param(max_part, int, 0); +module_param(max_part, int, S_IRUGO); MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk"); MODULE_LICENSE("GPL"); MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR); @@ -578,9 +578,20 @@ static int __init brd_init(void) */ part_shift = 0; - if (max_part > 0) + if (max_part > 0) { part_shift = fls(max_part); + /* + * Adjust max_part according to part_shift as it is exported + * to user space so that user can decide correct minor number + * if [s]he want to create more devices. + * + * Note that -1 is required because partition 0 is reserved + * for the whole disk. + */ + max_part = (1UL << part_shift) - 1; + } + if ((1UL << part_shift) > DISK_MAX_PARTS) return -EINVAL; -- cgit v1.2.3 From 75e3f3ee3c64968d42f4843ec49e579f84b5aa0c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 26 May 2011 21:06:50 +0200 Subject: block: always allocate genhd->ev if check_events is implemented 9fd097b149 (block: unexport DISK_EVENT_MEDIA_CHANGE for legacy/fringe drivers) removed DISK_EVENT_MEDIA_CHANGE from legacy/fringe block drivers which have inadequate ->check_events(). Combined with earlier change 7c88a168da (block: don't propagate unlisted DISK_EVENTs to userland), this enables using ->check_events() for internal processing while avoiding enabling in-kernel block event polling which can lead to infinite event loop. Unfortunately, this made many drivers including floppy without any bit set in disk->events and ->async_events in which case disk_add_events() simply skipped allocation of disk->ev, which disables whole event handling. As ->check_events() is still used during open processing for revalidation, this can lead to open failure. This patch always allocates disk->ev if ->check_events is implemented. In the long term, it would make sense to simply include the event structure inline into genhd as it's now used by virtually all block devices. Signed-off-by: Tejun Heo Reported-by: Ondrej Zary Reported-by: Alex Villacis Lasso Cc: stable@kernel.org Signed-off-by: Jens Axboe --- block/genhd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/block/genhd.c b/block/genhd.c index 2dd988723d73..95822ae25cfe 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1728,7 +1728,7 @@ static void disk_add_events(struct gendisk *disk) { struct disk_events *ev; - if (!disk->fops->check_events || !(disk->events | disk->async_events)) + if (!disk->fops->check_events) return; ev = kzalloc(sizeof(*ev), GFP_KERNEL); -- cgit v1.2.3 From 700c4f3325495d2e0e619fb48b900ec942f1470b Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Thu, 26 May 2011 21:07:26 +0200 Subject: block: remove unused variable in bio_attempt_front_merge() sector is never read inside the function. Signed-off-by: Luca Tettamanti Signed-off-by: Jens Axboe --- block/blk-core.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index c8303e9d919d..dd8ae71168c5 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1130,7 +1130,6 @@ static bool bio_attempt_front_merge(struct request_queue *q, struct request *req, struct bio *bio) { const int ff = bio->bi_rw & REQ_FAILFAST_MASK; - sector_t sector; if (!ll_front_merge_fn(q, req, bio)) return false; @@ -1140,8 +1139,6 @@ static bool bio_attempt_front_merge(struct request_queue *q, if ((req->cmd_flags & REQ_FAILFAST_MASK) != ff) blk_rq_set_mixed_merge(req); - sector = bio->bi_sector; - bio->bi_next = req->bio; req->bio = bio; -- cgit v1.2.3 From 21bc7af6e5e684b44725b20f679e701e38ceef15 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Wed, 18 May 2011 12:02:03 -0700 Subject: mwifiex: correct event header length While decoding received event packet from firmware, 4 bytes of interface header are already removed unconditionally. So for handling event only 4 more bytes needs to be pulled. This is achieved by changing event header length to 4. Almost all the events, except BA stream related and AMSDU aggregation control events, do not have the payload in their event skb. Such events handling depends only on the event ID. This event ID is the first four bytes of the event skb, which is copied to a separate variable before pulling the skb header. Hence event handling worked only for those events that didn't have payload in event skb. This patch fixes the broken event path of the events with payload in their event skb without harming existing working event path for the events without payload. Signed-off-by: Yogesh Ashok Powar Signed-off-by: Kiran Divekar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/sdio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwifiex/sdio.h b/drivers/net/wireless/mwifiex/sdio.h index a0e9bc5253e0..4e97e90aa399 100644 --- a/drivers/net/wireless/mwifiex/sdio.h +++ b/drivers/net/wireless/mwifiex/sdio.h @@ -167,8 +167,8 @@ /* Rx unit register */ #define CARD_RX_UNIT_REG 0x63 -/* Event header Len*/ -#define MWIFIEX_EVENT_HEADER_LEN 8 +/* Event header len w/o 4 bytes of interface header */ +#define MWIFIEX_EVENT_HEADER_LEN 4 /* Max retry number of CMD53 write */ #define MAX_WRITE_IOMEM_RETRY 2 -- cgit v1.2.3 From 208c72f4fe44fe09577e7975ba0e7fa0278f3d03 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 19 May 2011 00:43:38 +0300 Subject: nl80211: fix check for valid SSID size in scan operations In both trigger_scan and sched_scan operations, we were checking for the SSID length before assigning the value correctly. Since the memory was just kzalloc'ed, the check was always failing and SSID with over 32 characters were allowed to go through. This was causing a buffer overflow when copying the actual SSID to the proper place. This bug has been there since 2.6.29-rc4. Cc: stable@kernel.org Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- net/wireless/nl80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index ec83f413a7ed..88a565f130a5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3406,12 +3406,12 @@ static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info) i = 0; if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) { nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) { + request->ssids[i].ssid_len = nla_len(attr); if (request->ssids[i].ssid_len > IEEE80211_MAX_SSID_LEN) { err = -EINVAL; goto out_free; } memcpy(request->ssids[i].ssid, nla_data(attr), nla_len(attr)); - request->ssids[i].ssid_len = nla_len(attr); i++; } } @@ -3572,6 +3572,7 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) { nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) { + request->ssids[i].ssid_len = nla_len(attr); if (request->ssids[i].ssid_len > IEEE80211_MAX_SSID_LEN) { err = -EINVAL; @@ -3579,7 +3580,6 @@ static int nl80211_start_sched_scan(struct sk_buff *skb, } memcpy(request->ssids[i].ssid, nla_data(attr), nla_len(attr)); - request->ssids[i].ssid_len = nla_len(attr); i++; } } -- cgit v1.2.3 From a9e12869758430424804dd4332e0d2afdfdf00b0 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 19 May 2011 10:17:04 -0500 Subject: rtlwifi: Fix kernel panic resulting from RX buffer allocation failure To handle amsdu_8k capability, the PCI routine of this driver must allocate receive buffers of order 2. Under heavy load, this causes fragmentation of memory. The present code releases the current buffer before checking to see if a new one is availble. Recovery from allocation failures is not possible, which results in kernel panics. The fix is to reorder the code to check that a new buffer can be allocated before the old one is released. If not possible, the received frame is dropped and the old one is reused. Without this change, it is impossible to transfer a 2 GB file without a kernel panic. Signed-off-by: Larry Finger Cc: Stable [2.6.{37,38,39}] Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index a40952845436..c2b83a57c581 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -669,11 +669,6 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) &rx_status, (u8 *) pdesc, skb); - pci_unmap_single(rtlpci->pdev, - *((dma_addr_t *) skb->cb), - rtlpci->rxbuffersize, - PCI_DMA_FROMDEVICE); - skb_put(skb, rtlpriv->cfg->ops->get_desc((u8 *) pdesc, false, HW_DESC_RXPKT_LEN)); @@ -690,6 +685,21 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) hdr = rtl_get_hdr(skb); fc = rtl_get_fc(skb); + /* try for new buffer - if allocation fails, drop + * frame and reuse old buffer + */ + new_skb = dev_alloc_skb(rtlpci->rxbuffersize); + if (unlikely(!new_skb)) { + RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), + DBG_DMESG, + ("can't alloc skb for rx\n")); + goto done; + } + pci_unmap_single(rtlpci->pdev, + *((dma_addr_t *) skb->cb), + rtlpci->rxbuffersize, + PCI_DMA_FROMDEVICE); + if (!stats.crc || !stats.hwerror) { memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); @@ -758,15 +768,7 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) rtl_lps_leave(hw); } - new_skb = dev_alloc_skb(rtlpci->rxbuffersize); - if (unlikely(!new_skb)) { - RT_TRACE(rtlpriv, (COMP_INTR | COMP_RECV), - DBG_DMESG, - ("can't alloc skb for rx\n")); - goto done; - } skb = new_skb; - /*skb->dev = dev; */ rtlpci->rx_ring[rx_queue_idx].rx_buf[rtlpci-> rx_ring -- cgit v1.2.3 From 0019a2c9277bf6d083032a5a9857249e75407a8c Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 19 May 2011 11:48:45 -0500 Subject: rtlwifi: Use order 2 RX buffer allocation only if necessary Although a previous fix handles the kernel panics that result from failure to allocate a new RX buffer, memory fragmentation can be reduced if the amsdu_8k capability is disabled as new buffers need only be of O(0), not O(2). Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index c2b83a57c581..89100e7c553b 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1115,6 +1115,13 @@ static int _rtl_pci_init_rx_ring(struct ieee80211_hw *hw) rtlpci->rx_ring[rx_queue_idx].idx = 0; + /* If amsdu_8k is disabled, set buffersize to 4096. This + * change will reduce memory fragmentation. + */ + if (rtlpci->rxbuffersize > 4096 && + rtlpriv->rtlhal.disable_amsdu_8k) + rtlpci->rxbuffersize = 4096; + for (i = 0; i < rtlpci->rxringcount; i++) { struct sk_buff *skb = dev_alloc_skb(rtlpci->rxbuffersize); -- cgit v1.2.3 From fb23d86382a088d50020fd05024d40af5b00f885 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Fri, 20 May 2011 01:04:46 +0200 Subject: b43: N-PHY: initialize last var in calibration function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported-by: Larry Finger Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: John W. Linville --- drivers/net/wireless/b43/phy_n.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c index 9ed65157bef5..05960ddde24e 100644 --- a/drivers/net/wireless/b43/phy_n.c +++ b/drivers/net/wireless/b43/phy_n.c @@ -3093,7 +3093,7 @@ static int b43_nphy_cal_tx_iq_lo(struct b43_wldev *dev, int freq; bool avoid = false; u8 length; - u16 tmp, core, type, count, max, numb, last, cmd; + u16 tmp, core, type, count, max, numb, last = 0, cmd; const u16 *table; bool phy6or5x; -- cgit v1.2.3 From a4d86d953b8593791cb29cf2acffd48f9ee6c4f9 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 20 May 2011 17:52:10 +0530 Subject: ath9k: Reset chip on baseband hang Resetting hardware helps to recover from baseband hang/panic for AR9003 based chips. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index bd18b1d01be7..409ef5885a11 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -670,7 +670,8 @@ void ath9k_tasklet(unsigned long data) u32 status = sc->intrstatus; u32 rxmask; - if (status & ATH9K_INT_FATAL) { + if ((status & ATH9K_INT_FATAL) || + (status & ATH9K_INT_BB_WATCHDOG)) { ath_reset(sc, true); return; } @@ -737,6 +738,7 @@ irqreturn_t ath_isr(int irq, void *dev) { #define SCHED_INTR ( \ ATH9K_INT_FATAL | \ + ATH9K_INT_BB_WATCHDOG | \ ATH9K_INT_RXORN | \ ATH9K_INT_RXEOL | \ ATH9K_INT_RX | \ -- cgit v1.2.3 From 51ac8cbb2176dc159ee910d7074c6796079c3068 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 20 May 2011 17:52:13 +0530 Subject: ath9k_hw: disable phy restart on baseband panic caused by RXSM While receiving unsupported rate frame rx state machine gets into a state 0xb and if phy_restart happens in that state, BB would go hang. If RXSM is in 0xb state after first bb panic, ensure to disable the phy_restart. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 22 ++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/hw.c | 5 ++++- drivers/net/wireless/ath/ath9k/hw.h | 2 ++ 3 files changed, 28 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index eee23ecd118a..892c48b15434 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1381,3 +1381,25 @@ void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah) "==== BB update: done ====\n\n"); } EXPORT_SYMBOL(ar9003_hw_bb_watchdog_dbg_info); + +void ar9003_hw_disable_phy_restart(struct ath_hw *ah) +{ + u32 val; + + /* While receiving unsupported rate frame rx state machine + * gets into a state 0xb and if phy_restart happens in that + * state, BB would go hang. If RXSM is in 0xb state after + * first bb panic, ensure to disable the phy_restart. + */ + if (!((MS(ah->bb_watchdog_last_status, + AR_PHY_WATCHDOG_RX_OFDM_SM) == 0xb) || + ah->bb_hang_rx_ofdm)) + return; + + ah->bb_hang_rx_ofdm = true; + val = REG_READ(ah, AR_PHY_RESTART); + val &= ~AR_PHY_RESTART_ENA; + + REG_WRITE(ah, AR_PHY_RESTART, val); +} +EXPORT_SYMBOL(ar9003_hw_disable_phy_restart); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 72543ce8f616..1be7c8bbef84 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1555,9 +1555,12 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, if (ah->btcoex_hw.enabled) ath9k_hw_btcoex_enable(ah); - if (AR_SREV_9300_20_OR_LATER(ah)) + if (AR_SREV_9300_20_OR_LATER(ah)) { ar9003_hw_bb_watchdog_config(ah); + ar9003_hw_disable_phy_restart(ah); + } + ath9k_hw_apply_gpio_override(ah); return 0; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 57435ce62792..4b157c53d1a8 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -842,6 +842,7 @@ struct ath_hw { u32 bb_watchdog_last_status; u32 bb_watchdog_timeout_ms; /* in ms, 0 to disable */ + u8 bb_hang_rx_ofdm; /* true if bb hang due to rx_ofdm */ unsigned int paprd_target_power; unsigned int paprd_training_power; @@ -990,6 +991,7 @@ void ar9002_hw_enable_wep_aggregation(struct ath_hw *ah); void ar9003_hw_bb_watchdog_config(struct ath_hw *ah); void ar9003_hw_bb_watchdog_read(struct ath_hw *ah); void ar9003_hw_bb_watchdog_dbg_info(struct ath_hw *ah); +void ar9003_hw_disable_phy_restart(struct ath_hw *ah); void ar9003_paprd_enable(struct ath_hw *ah, bool val); void ar9003_paprd_populate_single_table(struct ath_hw *ah, struct ath9k_hw_cal_data *caldata, -- cgit v1.2.3 From 41e2b05b9598d6bdf91fc20280bfc538d853f769 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 20 May 2011 17:52:14 +0530 Subject: ath9k: set 40 Mhz rate only if hw is configured in ht40 Whenever there is a channel width change from 40 Mhz to 20 Mhz, the hardware is reconfigured to ht20. Meantime before doing the rate control updation, the packets are being transmitted are selected rate with IEEE80211_TX_RC_40_MHZ_WIDTH. While transmitting ht40 rate packets in ht20 mode is causing baseband panic with AR9003 based chips. ==== BB update: BB status=0x02001109 ==== ath: ** BB state: wd=1 det=1 rdar=0 rOFDM=1 rCCK=1 tOFDM=0 tCCK=0 agc=2 src=0 ** ath: ** BB WD cntl: cntl1=0xffff0085 cntl2=0x00000004 ** ath: ** BB mode: BB_gen_controls=0x000033c0 ** ath: ** BB busy times: rx_clear=99%, rx_frame=0%, tx_frame=0% ** ath: ==== BB update: done ==== Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/rc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 133502b9c832..c0d0773baa22 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -689,7 +689,8 @@ static void ath_rc_rate_set_series(const struct ath_rate_table *rate_table, if (WLAN_RC_PHY_HT(rate_table->info[rix].phy)) { rate->flags |= IEEE80211_TX_RC_MCS; - if (WLAN_RC_PHY_40(rate_table->info[rix].phy)) + if (WLAN_RC_PHY_40(rate_table->info[rix].phy) && + conf_is_ht40(&txrc->hw->conf)) rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; if (WLAN_RC_PHY_SGI(rate_table->info[rix].phy)) rate->flags |= IEEE80211_TX_RC_SHORT_GI; -- cgit v1.2.3 From 1d38c16ce4156f63b45abbd09dd28ca2ef5172b4 Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Fri, 20 May 2011 17:52:15 +0530 Subject: mac80211: stop queues before rate control updation Stop tx queues before updating rate control to ensure proper rate selection. Otherwise packets can be transmitted in 40 Mhz whereas hw is configured in HT20. Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 4f6b2675e41d..746595597b68 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -232,6 +232,9 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata, WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type)); } + ieee80211_stop_queues_by_reason(&sdata->local->hw, + IEEE80211_QUEUE_STOP_REASON_CSA); + /* channel_type change automatically detected */ ieee80211_hw_config(local, 0); @@ -245,6 +248,9 @@ static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata, rcu_read_unlock(); } + ieee80211_wake_queues_by_reason(&sdata->local->hw, + IEEE80211_QUEUE_STOP_REASON_CSA); + ht_opmode = le16_to_cpu(hti->operation_mode); /* if bss configuration changed store the new one */ -- cgit v1.2.3 From 073cc4e95ad5dd2d86f5328b9ea5c9355907c6a2 Mon Sep 17 00:00:00 2001 From: Ed Wildgoose Date: Thu, 7 Apr 2011 15:51:15 -0700 Subject: gpio/cs5535: Show explicit dependency between gpio_cs5535 and mfd_cs5535 cs5535-gpio.c has been split into two, with various setup moved into cs5535-mfd.c. Given that cs5535-gpio will not load without the -mfd part, lets make that dependency explicit in Kconfig Signed-off-by: Ed Wildgoose Acked-by: Andres Salomon Signed-off-by: Andrew Morton Signed-off-by: Grant Likely --- drivers/gpio/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b57ec09af891..ebd1124b0764 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -303,7 +303,7 @@ comment "PCI GPIO expanders:" config GPIO_CS5535 tristate "AMD CS5535/CS5536 GPIO support" - depends on PCI && X86 && !CS5535_GPIO + depends on PCI && X86 && !CS5535_GPIO && MFD_CS5535 help The AMD CS5535 and CS5536 southbridges support 28 GPIO pins that can be used for quite a number of things. The CS5535/6 is found on -- cgit v1.2.3 From 33226ffd0726508da1eeb660170a63100f4456ac Mon Sep 17 00:00:00 2001 From: Haojian Zhuang Date: Mon, 18 Apr 2011 22:12:46 +0800 Subject: gpio/pca953x: Add support for pca9574 and pca9575 devices PCA957x is i2c gpio expander, and similar to PCA953x. Although register configurations are different between PCA957x and PCA953x. They can share a lot of components, such as IRQ handling, GPIO IN/OUT. So updating PCA953x driver to support PCA957x chips. Signed-off-by: Haojian Zhuang Signed-off-by: Grant Likely --- drivers/gpio/pca953x.c | 249 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 191 insertions(+), 58 deletions(-) diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 78a843947d82..0451d7ac94ac 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -24,33 +24,46 @@ #include #endif -#define PCA953X_INPUT 0 -#define PCA953X_OUTPUT 1 -#define PCA953X_INVERT 2 -#define PCA953X_DIRECTION 3 - -#define PCA953X_GPIOS 0x00FF -#define PCA953X_INT 0x0100 +#define PCA953X_INPUT 0 +#define PCA953X_OUTPUT 1 +#define PCA953X_INVERT 2 +#define PCA953X_DIRECTION 3 + +#define PCA957X_IN 0 +#define PCA957X_INVRT 1 +#define PCA957X_BKEN 2 +#define PCA957X_PUPD 3 +#define PCA957X_CFG 4 +#define PCA957X_OUT 5 +#define PCA957X_MSK 6 +#define PCA957X_INTS 7 + +#define PCA_GPIO_MASK 0x00FF +#define PCA_INT 0x0100 +#define PCA953X_TYPE 0x1000 +#define PCA957X_TYPE 0x2000 static const struct i2c_device_id pca953x_id[] = { - { "pca9534", 8 | PCA953X_INT, }, - { "pca9535", 16 | PCA953X_INT, }, - { "pca9536", 4, }, - { "pca9537", 4 | PCA953X_INT, }, - { "pca9538", 8 | PCA953X_INT, }, - { "pca9539", 16 | PCA953X_INT, }, - { "pca9554", 8 | PCA953X_INT, }, - { "pca9555", 16 | PCA953X_INT, }, - { "pca9556", 8, }, - { "pca9557", 8, }, - - { "max7310", 8, }, - { "max7312", 16 | PCA953X_INT, }, - { "max7313", 16 | PCA953X_INT, }, - { "max7315", 8 | PCA953X_INT, }, - { "pca6107", 8 | PCA953X_INT, }, - { "tca6408", 8 | PCA953X_INT, }, - { "tca6416", 16 | PCA953X_INT, }, + { "pca9534", 8 | PCA953X_TYPE | PCA_INT, }, + { "pca9535", 16 | PCA953X_TYPE | PCA_INT, }, + { "pca9536", 4 | PCA953X_TYPE, }, + { "pca9537", 4 | PCA953X_TYPE | PCA_INT, }, + { "pca9538", 8 | PCA953X_TYPE | PCA_INT, }, + { "pca9539", 16 | PCA953X_TYPE | PCA_INT, }, + { "pca9554", 8 | PCA953X_TYPE | PCA_INT, }, + { "pca9555", 16 | PCA953X_TYPE | PCA_INT, }, + { "pca9556", 8 | PCA953X_TYPE, }, + { "pca9557", 8 | PCA953X_TYPE, }, + { "pca9574", 8 | PCA957X_TYPE | PCA_INT, }, + { "pca9575", 16 | PCA957X_TYPE | PCA_INT, }, + + { "max7310", 8 | PCA953X_TYPE, }, + { "max7312", 16 | PCA953X_TYPE | PCA_INT, }, + { "max7313", 16 | PCA953X_TYPE | PCA_INT, }, + { "max7315", 8 | PCA953X_TYPE | PCA_INT, }, + { "pca6107", 8 | PCA953X_TYPE | PCA_INT, }, + { "tca6408", 8 | PCA953X_TYPE | PCA_INT, }, + { "tca6416", 16 | PCA953X_TYPE | PCA_INT, }, /* NYET: { "tca6424", 24, }, */ { } }; @@ -75,16 +88,32 @@ struct pca953x_chip { struct pca953x_platform_data *dyn_pdata; struct gpio_chip gpio_chip; const char *const *names; + int chip_type; }; static int pca953x_write_reg(struct pca953x_chip *chip, int reg, uint16_t val) { - int ret; + int ret = 0; if (chip->gpio_chip.ngpio <= 8) ret = i2c_smbus_write_byte_data(chip->client, reg, val); - else - ret = i2c_smbus_write_word_data(chip->client, reg << 1, val); + else { + switch (chip->chip_type) { + case PCA953X_TYPE: + ret = i2c_smbus_write_word_data(chip->client, + reg << 1, val); + break; + case PCA957X_TYPE: + ret = i2c_smbus_write_byte_data(chip->client, reg << 1, + val & 0xff); + if (ret < 0) + break; + ret = i2c_smbus_write_byte_data(chip->client, + (reg << 1) + 1, + (val & 0xff00) >> 8); + break; + } + } if (ret < 0) { dev_err(&chip->client->dev, "failed writing register\n"); @@ -116,13 +145,22 @@ static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off) { struct pca953x_chip *chip; uint16_t reg_val; - int ret; + int ret, offset = 0; chip = container_of(gc, struct pca953x_chip, gpio_chip); mutex_lock(&chip->i2c_lock); reg_val = chip->reg_direction | (1u << off); - ret = pca953x_write_reg(chip, PCA953X_DIRECTION, reg_val); + + switch (chip->chip_type) { + case PCA953X_TYPE: + offset = PCA953X_DIRECTION; + break; + case PCA957X_TYPE: + offset = PCA957X_CFG; + break; + } + ret = pca953x_write_reg(chip, offset, reg_val); if (ret) goto exit; @@ -138,7 +176,7 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc, { struct pca953x_chip *chip; uint16_t reg_val; - int ret; + int ret, offset = 0; chip = container_of(gc, struct pca953x_chip, gpio_chip); @@ -149,7 +187,15 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc, else reg_val = chip->reg_output & ~(1u << off); - ret = pca953x_write_reg(chip, PCA953X_OUTPUT, reg_val); + switch (chip->chip_type) { + case PCA953X_TYPE: + offset = PCA953X_OUTPUT; + break; + case PCA957X_TYPE: + offset = PCA957X_OUT; + break; + } + ret = pca953x_write_reg(chip, offset, reg_val); if (ret) goto exit; @@ -157,7 +203,15 @@ static int pca953x_gpio_direction_output(struct gpio_chip *gc, /* then direction */ reg_val = chip->reg_direction & ~(1u << off); - ret = pca953x_write_reg(chip, PCA953X_DIRECTION, reg_val); + switch (chip->chip_type) { + case PCA953X_TYPE: + offset = PCA953X_DIRECTION; + break; + case PCA957X_TYPE: + offset = PCA957X_CFG; + break; + } + ret = pca953x_write_reg(chip, offset, reg_val); if (ret) goto exit; @@ -172,12 +226,20 @@ static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off) { struct pca953x_chip *chip; uint16_t reg_val; - int ret; + int ret, offset = 0; chip = container_of(gc, struct pca953x_chip, gpio_chip); mutex_lock(&chip->i2c_lock); - ret = pca953x_read_reg(chip, PCA953X_INPUT, ®_val); + switch (chip->chip_type) { + case PCA953X_TYPE: + offset = PCA953X_INPUT; + break; + case PCA957X_TYPE: + offset = PCA957X_IN; + break; + } + ret = pca953x_read_reg(chip, offset, ®_val); mutex_unlock(&chip->i2c_lock); if (ret < 0) { /* NOTE: diagnostic already emitted; that's all we should @@ -194,7 +256,7 @@ static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val) { struct pca953x_chip *chip; uint16_t reg_val; - int ret; + int ret, offset = 0; chip = container_of(gc, struct pca953x_chip, gpio_chip); @@ -204,7 +266,15 @@ static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val) else reg_val = chip->reg_output & ~(1u << off); - ret = pca953x_write_reg(chip, PCA953X_OUTPUT, reg_val); + switch (chip->chip_type) { + case PCA953X_TYPE: + offset = PCA953X_OUTPUT; + break; + case PCA957X_TYPE: + offset = PCA957X_OUT; + break; + } + ret = pca953x_write_reg(chip, offset, reg_val); if (ret) goto exit; @@ -322,9 +392,17 @@ static uint16_t pca953x_irq_pending(struct pca953x_chip *chip) uint16_t old_stat; uint16_t pending; uint16_t trigger; - int ret; - - ret = pca953x_read_reg(chip, PCA953X_INPUT, &cur_stat); + int ret, offset = 0; + + switch (chip->chip_type) { + case PCA953X_TYPE: + offset = PCA953X_INPUT; + break; + case PCA957X_TYPE: + offset = PCA957X_IN; + break; + } + ret = pca953x_read_reg(chip, offset, &cur_stat); if (ret) return 0; @@ -372,14 +450,21 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, { struct i2c_client *client = chip->client; struct pca953x_platform_data *pdata = client->dev.platform_data; - int ret; + int ret, offset = 0; if (pdata->irq_base != -1 - && (id->driver_data & PCA953X_INT)) { + && (id->driver_data & PCA_INT)) { int lvl; - ret = pca953x_read_reg(chip, PCA953X_INPUT, - &chip->irq_stat); + switch (chip->chip_type) { + case PCA953X_TYPE: + offset = PCA953X_INPUT; + break; + case PCA957X_TYPE: + offset = PCA957X_IN; + break; + } + ret = pca953x_read_reg(chip, offset, &chip->irq_stat); if (ret) goto out_failed; @@ -439,7 +524,7 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, struct i2c_client *client = chip->client; struct pca953x_platform_data *pdata = client->dev.platform_data; - if (pdata->irq_base != -1 && (id->driver_data & PCA953X_INT)) + if (pdata->irq_base != -1 && (id->driver_data & PCA_INT)) dev_warn(&client->dev, "interrupt support not compiled in\n"); return 0; @@ -499,12 +584,65 @@ pca953x_get_alt_pdata(struct i2c_client *client) } #endif +static int __devinit device_pca953x_init(struct pca953x_chip *chip, int invert) +{ + int ret; + + ret = pca953x_read_reg(chip, PCA953X_OUTPUT, &chip->reg_output); + if (ret) + goto out; + + ret = pca953x_read_reg(chip, PCA953X_DIRECTION, + &chip->reg_direction); + if (ret) + goto out; + + /* set platform specific polarity inversion */ + ret = pca953x_write_reg(chip, PCA953X_INVERT, invert); + if (ret) + goto out; + return 0; +out: + return ret; +} + +static int __devinit device_pca957x_init(struct pca953x_chip *chip, int invert) +{ + int ret; + uint16_t val = 0; + + /* Let every port in proper state, that could save power */ + pca953x_write_reg(chip, PCA957X_PUPD, 0x0); + pca953x_write_reg(chip, PCA957X_CFG, 0xffff); + pca953x_write_reg(chip, PCA957X_OUT, 0x0); + + ret = pca953x_read_reg(chip, PCA957X_IN, &val); + if (ret) + goto out; + ret = pca953x_read_reg(chip, PCA957X_OUT, &chip->reg_output); + if (ret) + goto out; + ret = pca953x_read_reg(chip, PCA957X_CFG, &chip->reg_direction); + if (ret) + goto out; + + /* set platform specific polarity inversion */ + pca953x_write_reg(chip, PCA957X_INVRT, invert); + + /* To enable register 6, 7 to controll pull up and pull down */ + pca953x_write_reg(chip, PCA957X_BKEN, 0x202); + + return 0; +out: + return ret; +} + static int __devinit pca953x_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct pca953x_platform_data *pdata; struct pca953x_chip *chip; - int ret; + int ret = 0; chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL); if (chip == NULL) @@ -531,25 +669,20 @@ static int __devinit pca953x_probe(struct i2c_client *client, chip->gpio_start = pdata->gpio_base; chip->names = pdata->names; + chip->chip_type = id->driver_data & (PCA953X_TYPE | PCA957X_TYPE); mutex_init(&chip->i2c_lock); /* initialize cached registers from their original values. * we can't share this chip with another i2c master. */ - pca953x_setup_gpio(chip, id->driver_data & PCA953X_GPIOS); + pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK); - ret = pca953x_read_reg(chip, PCA953X_OUTPUT, &chip->reg_output); - if (ret) - goto out_failed; - - ret = pca953x_read_reg(chip, PCA953X_DIRECTION, &chip->reg_direction); - if (ret) - goto out_failed; - - /* set platform specific polarity inversion */ - ret = pca953x_write_reg(chip, PCA953X_INVERT, pdata->invert); - if (ret) + if (chip->chip_type == PCA953X_TYPE) + device_pca953x_init(chip, pdata->invert); + else if (chip->chip_type == PCA957X_TYPE) + device_pca957x_init(chip, pdata->invert); + else goto out_failed; ret = pca953x_irq_setup(chip, id); -- cgit v1.2.3 From c95286d81b976f4224c7b153defc8eec07e837d9 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 26 May 2011 15:08:56 -0500 Subject: [SCSI] MAINTAINERS update for SCSI (new email address) Signed-off-by: James Bottomley --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 1868aafae968..c12c0c746cbf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5494,7 +5494,7 @@ F: drivers/scsi/sg.c F: include/scsi/sg.h SCSI SUBSYSTEM -M: "James E.J. Bottomley" +M: "James E.J. Bottomley" L: linux-scsi@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git -- cgit v1.2.3 From 7812803a3119f7cf375bd04bc019ce2395a7c2fc Mon Sep 17 00:00:00 2001 From: Kristen Carlson Accardi Date: Tue, 10 May 2011 14:23:45 +0100 Subject: langwell_gpio: add runtime pm support While this is essentially a no-op for this driver, it has the side effect of letting the PMU driver snoop D3 requests from the PCI core for this driver. This is only for langwell, not for whitney point. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Alan Cox Signed-off-by: Dirk Brandewie Signed-off-by: Grant Likely --- drivers/gpio/langwell_gpio.c | 65 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) diff --git a/drivers/gpio/langwell_gpio.c b/drivers/gpio/langwell_gpio.c index 1b06f67e1f69..bd6571e0097a 100644 --- a/drivers/gpio/langwell_gpio.c +++ b/drivers/gpio/langwell_gpio.c @@ -33,6 +33,7 @@ #include #include #include +#include /* * Langwell chip has 64 pins and thus there are 2 32bit registers to control @@ -63,6 +64,7 @@ struct lnw_gpio { void *reg_base; spinlock_t lock; unsigned irq_base; + struct pci_dev *pdev; }; static void __iomem *gpio_reg(struct gpio_chip *chip, unsigned offset, @@ -104,11 +106,18 @@ static int lnw_gpio_direction_input(struct gpio_chip *chip, unsigned offset) u32 value; unsigned long flags; + if (lnw->pdev) + pm_runtime_get(&lnw->pdev->dev); + spin_lock_irqsave(&lnw->lock, flags); value = readl(gpdr); value &= ~BIT(offset % 32); writel(value, gpdr); spin_unlock_irqrestore(&lnw->lock, flags); + + if (lnw->pdev) + pm_runtime_put(&lnw->pdev->dev); + return 0; } @@ -120,11 +129,19 @@ static int lnw_gpio_direction_output(struct gpio_chip *chip, unsigned long flags; lnw_gpio_set(chip, offset, value); + + if (lnw->pdev) + pm_runtime_get(&lnw->pdev->dev); + spin_lock_irqsave(&lnw->lock, flags); value = readl(gpdr); value |= BIT(offset % 32); writel(value, gpdr); spin_unlock_irqrestore(&lnw->lock, flags); + + if (lnw->pdev) + pm_runtime_put(&lnw->pdev->dev); + return 0; } @@ -145,6 +162,10 @@ static int lnw_irq_type(struct irq_data *d, unsigned type) if (gpio >= lnw->chip.ngpio) return -EINVAL; + + if (lnw->pdev) + pm_runtime_get(&lnw->pdev->dev); + spin_lock_irqsave(&lnw->lock, flags); if (type & IRQ_TYPE_EDGE_RISING) value = readl(grer) | BIT(gpio % 32); @@ -159,6 +180,9 @@ static int lnw_irq_type(struct irq_data *d, unsigned type) writel(value, gfer); spin_unlock_irqrestore(&lnw->lock, flags); + if (lnw->pdev) + pm_runtime_put(&lnw->pdev->dev); + return 0; } @@ -211,6 +235,39 @@ static void lnw_irq_handler(unsigned irq, struct irq_desc *desc) chip->irq_eoi(data); } +#ifdef CONFIG_PM +static int lnw_gpio_runtime_resume(struct device *dev) +{ + return 0; +} + +static int lnw_gpio_runtime_suspend(struct device *dev) +{ + return 0; +} + +static int lnw_gpio_runtime_idle(struct device *dev) +{ + int err = pm_schedule_suspend(dev, 500); + + if (!err) + return 0; + + return -EBUSY; +} + +#else +#define lnw_gpio_runtime_suspend NULL +#define lnw_gpio_runtime_resume NULL +#define lnw_gpio_runtime_idle NULL +#endif + +static const struct dev_pm_ops lnw_gpio_pm_ops = { + .runtime_suspend = lnw_gpio_runtime_suspend, + .runtime_resume = lnw_gpio_runtime_resume, + .runtime_idle = lnw_gpio_runtime_idle, +}; + static int __devinit lnw_gpio_probe(struct pci_dev *pdev, const struct pci_device_id *id) { @@ -270,6 +327,7 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev, lnw->chip.base = gpio_base; lnw->chip.ngpio = id->driver_data; lnw->chip.can_sleep = 0; + lnw->pdev = pdev; pci_set_drvdata(pdev, lnw); retval = gpiochip_add(&lnw->chip); if (retval) { @@ -285,6 +343,10 @@ static int __devinit lnw_gpio_probe(struct pci_dev *pdev, } spin_lock_init(&lnw->lock); + + pm_runtime_put_noidle(&pdev->dev); + pm_runtime_allow(&pdev->dev); + goto done; err5: kfree(lnw); @@ -302,6 +364,9 @@ static struct pci_driver lnw_gpio_driver = { .name = "langwell_gpio", .id_table = lnw_gpio_ids, .probe = lnw_gpio_probe, + .driver = { + .pm = &lnw_gpio_pm_ops, + }, }; -- cgit v1.2.3 From 0f7e4c33eb2c40b1e9cc24d2eab6de5921bc619c Mon Sep 17 00:00:00 2001 From: Kohei Kaigai Date: Thu, 26 May 2011 14:59:25 -0400 Subject: selinux: fix case of names with whitespace/multibytes on /selinux/create I submit the patch again, according to patch submission convension. This patch enables to accept percent-encoded object names as forth argument of /selinux/create interface to avoid possible bugs when we give an object name including whitespace or multibutes. E.g) if and when a userspace object manager tries to create a new object named as "resolve.conf but fake", it shall give this name as the forth argument of the /selinux/create. But sscanf() logic in kernel space fetches only the part earlier than the first whitespace. In this case, selinux may unexpectedly answer a default security context configured to "resolve.conf", but it is bug. Although I could not test this patch on named TYPE_TRANSITION rules actually, But debug printk() message seems to me the logic works correctly. I assume the libselinux provides an interface to apply this logic transparently, so nothing shall not be changed from the viewpoint of application. Signed-off-by: KaiGai Kohei Signed-off-by: Eric Paris --- security/selinux/selinuxfs.c | 37 ++++++++++++++++++++++++++++++++++++- 1 file changed, 36 insertions(+), 1 deletion(-) diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c index fde4e9d64bfd..19489042fdf7 100644 --- a/security/selinux/selinuxfs.c +++ b/security/selinux/selinuxfs.c @@ -29,6 +29,7 @@ #include #include #include +#include /* selinuxfs pseudo filesystem for exporting the security policy API. Based on the proc code and the fs/nfsd/nfsctl.c code. */ @@ -751,6 +752,14 @@ out: return length; } +static inline int hexcode_to_int(int code) { + if (code == '\0' || !isxdigit(code)) + return -1; + if (isdigit(code)) + return code - '0'; + return tolower(code) - 'a' + 10; +} + static ssize_t sel_write_create(struct file *file, char *buf, size_t size) { char *scon = NULL, *tcon = NULL; @@ -785,8 +794,34 @@ static ssize_t sel_write_create(struct file *file, char *buf, size_t size) nargs = sscanf(buf, "%s %s %hu %s", scon, tcon, &tclass, namebuf); if (nargs < 3 || nargs > 4) goto out; - if (nargs == 4) + if (nargs == 4) { + /* + * If and when the name of new object to be queried contains + * either whitespace or multibyte characters, they shall be + * encoded based on the percentage-encoding rule. + * If not encoded, the sscanf logic picks up only left-half + * of the supplied name; splitted by a whitespace unexpectedly. + */ + char *r, *w; + int c1, c2; + + r = w = namebuf; + do { + c1 = *r++; + if (c1 == '+') + c1 = ' '; + else if (c1 == '%') { + if ((c1 = hexcode_to_int(*r++)) < 0) + goto out; + if ((c2 = hexcode_to_int(*r++)) < 0) + goto out; + c1 = (c1 << 4) | c2; + } + *w++ = c1; + } while (c1 != '\0'); + objname = namebuf; + } length = security_context_to_sid(scon, strlen(scon) + 1, &ssid); if (length) -- cgit v1.2.3 From bc9af76b1e87e4f925f97368dae6c22266922e8b Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 25 May 2011 16:56:34 +0530 Subject: dmaengine: add TODO items for future work on dma drivers Signed-off-by: Vinod Koul Signed-off-by: Dan Williams --- drivers/dma/TODO | 14 ++++++++++++++ 1 file changed, 14 insertions(+) create mode 100644 drivers/dma/TODO diff --git a/drivers/dma/TODO b/drivers/dma/TODO new file mode 100644 index 000000000000..a4af8589330c --- /dev/null +++ b/drivers/dma/TODO @@ -0,0 +1,14 @@ +TODO for slave dma + +1. Move remaining drivers to use new slave interface +2. Remove old slave pointer machansim +3. Make issue_pending to start the transaction in below drivers + - mpc512x_dma + - imx-dma + - imx-sdma + - mxs-dma.c + - dw_dmac + - intel_mid_dma + - ste_dma40 +4. Check other subsystems for dma drivers and merge/move to dmaengine +5. Remove dma_slave_config's dma direction. -- cgit v1.2.3 From 4cb5300bc839b8a943eb19c9f27f25470e22d0ca Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Tue, 24 May 2011 15:35:30 -0400 Subject: Btrfs: add mount -o auto_defrag This will detect small random writes into files and queue the up for an auto defrag process. It isn't well suited to database workloads yet, but works for smaller files such as rpm, sqlite or bdb databases. Signed-off-by: Chris Mason --- fs/btrfs/btrfs_inode.h | 1 + fs/btrfs/ctree.h | 45 ++++- fs/btrfs/disk-io.c | 12 ++ fs/btrfs/file.c | 257 ++++++++++++++++++++++++++++ fs/btrfs/inode.c | 12 ++ fs/btrfs/ioctl.c | 448 ++++++++++++++++++++++++++++++++++++++----------- fs/btrfs/ioctl.h | 31 ---- fs/btrfs/super.c | 7 +- 8 files changed, 678 insertions(+), 135 deletions(-) diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h index d0b0e43a6a8b..93b1aa932014 100644 --- a/fs/btrfs/btrfs_inode.h +++ b/fs/btrfs/btrfs_inode.h @@ -153,6 +153,7 @@ struct btrfs_inode { unsigned ordered_data_close:1; unsigned orphan_meta_reserved:1; unsigned dummy_inode:1; + unsigned in_defrag:1; /* * always compress this one file diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 026fc47b42cf..332323e19dd1 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1074,6 +1074,11 @@ struct btrfs_fs_info { /* all metadata allocations go through this cluster */ struct btrfs_free_cluster meta_alloc_cluster; + /* auto defrag inodes go here */ + spinlock_t defrag_inodes_lock; + struct rb_root defrag_inodes; + atomic_t defrag_running; + spinlock_t ref_cache_lock; u64 total_ref_cache_size; @@ -1205,6 +1210,38 @@ struct btrfs_root { struct super_block anon_super; }; +struct btrfs_ioctl_defrag_range_args { + /* start of the defrag operation */ + __u64 start; + + /* number of bytes to defrag, use (u64)-1 to say all */ + __u64 len; + + /* + * flags for the operation, which can include turning + * on compression for this one defrag + */ + __u64 flags; + + /* + * any extent bigger than this will be considered + * already defragged. Use 0 to take the kernel default + * Use 1 to say every single extent must be rewritten + */ + __u32 extent_thresh; + + /* + * which compression method to use if turning on compression + * for this defrag operation. If unspecified, zlib will + * be used + */ + __u32 compress_type; + + /* spare for later */ + __u32 unused[4]; +}; + + /* * inode items have the data typically returned from stat and store other * info about object characteristics. There is one for every file and dir in @@ -1302,6 +1339,7 @@ struct btrfs_root { #define BTRFS_MOUNT_CLEAR_CACHE (1 << 13) #define BTRFS_MOUNT_USER_SUBVOL_RM_ALLOWED (1 << 14) #define BTRFS_MOUNT_ENOSPC_DEBUG (1 << 15) +#define BTRFS_MOUNT_AUTO_DEFRAG (1 << 16) #define btrfs_clear_opt(o, opt) ((o) &= ~BTRFS_MOUNT_##opt) #define btrfs_set_opt(o, opt) ((o) |= BTRFS_MOUNT_##opt) @@ -2528,8 +2566,13 @@ extern const struct dentry_operations btrfs_dentry_operations; long btrfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg); void btrfs_update_iflags(struct inode *inode); void btrfs_inherit_iflags(struct inode *inode, struct inode *dir); - +int btrfs_defrag_file(struct inode *inode, struct file *file, + struct btrfs_ioctl_defrag_range_args *range, + u64 newer_than, unsigned long max_pages); /* file.c */ +int btrfs_add_inode_defrag(struct btrfs_trans_handle *trans, + struct inode *inode); +int btrfs_run_defrag_inodes(struct btrfs_fs_info *fs_info); int btrfs_sync_file(struct file *file, int datasync); int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end, int skip_pinned); diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 16d335b342a2..b2588a552658 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1475,6 +1475,7 @@ static int cleaner_kthread(void *arg) btrfs_run_delayed_iputs(root); btrfs_clean_old_snapshots(root); mutex_unlock(&root->fs_info->cleaner_mutex); + btrfs_run_defrag_inodes(root->fs_info); } if (freezing(current)) { @@ -1616,6 +1617,7 @@ struct btrfs_root *open_ctree(struct super_block *sb, spin_lock_init(&fs_info->ref_cache_lock); spin_lock_init(&fs_info->fs_roots_radix_lock); spin_lock_init(&fs_info->delayed_iput_lock); + spin_lock_init(&fs_info->defrag_inodes_lock); init_completion(&fs_info->kobj_unregister); fs_info->tree_root = tree_root; @@ -1638,9 +1640,11 @@ struct btrfs_root *open_ctree(struct super_block *sb, atomic_set(&fs_info->async_delalloc_pages, 0); atomic_set(&fs_info->async_submit_draining, 0); atomic_set(&fs_info->nr_async_bios, 0); + atomic_set(&fs_info->defrag_running, 0); fs_info->sb = sb; fs_info->max_inline = 8192 * 1024; fs_info->metadata_ratio = 0; + fs_info->defrag_inodes = RB_ROOT; fs_info->thread_pool_size = min_t(unsigned long, num_online_cpus() + 2, 8); @@ -2501,6 +2505,14 @@ int close_ctree(struct btrfs_root *root) smp_mb(); btrfs_scrub_cancel(root); + + /* wait for any defraggers to finish */ + wait_event(fs_info->transaction_wait, + (atomic_read(&fs_info->defrag_running) == 0)); + + /* clear out the rbtree of defraggable inodes */ + btrfs_run_defrag_inodes(root->fs_info); + btrfs_put_block_group_cache(fs_info); /* diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 58ddc4442159..c6a22d783c35 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -40,6 +40,263 @@ #include "locking.h" #include "compat.h" +/* + * when auto defrag is enabled we + * queue up these defrag structs to remember which + * inodes need defragging passes + */ +struct inode_defrag { + struct rb_node rb_node; + /* objectid */ + u64 ino; + /* + * transid where the defrag was added, we search for + * extents newer than this + */ + u64 transid; + + /* root objectid */ + u64 root; + + /* last offset we were able to defrag */ + u64 last_offset; + + /* if we've wrapped around back to zero once already */ + int cycled; +}; + +/* pop a record for an inode into the defrag tree. The lock + * must be held already + * + * If you're inserting a record for an older transid than an + * existing record, the transid already in the tree is lowered + * + * If an existing record is found the defrag item you + * pass in is freed + */ +static int __btrfs_add_inode_defrag(struct inode *inode, + struct inode_defrag *defrag) +{ + struct btrfs_root *root = BTRFS_I(inode)->root; + struct inode_defrag *entry; + struct rb_node **p; + struct rb_node *parent = NULL; + + p = &root->fs_info->defrag_inodes.rb_node; + while (*p) { + parent = *p; + entry = rb_entry(parent, struct inode_defrag, rb_node); + + if (defrag->ino < entry->ino) + p = &parent->rb_left; + else if (defrag->ino > entry->ino) + p = &parent->rb_right; + else { + /* if we're reinserting an entry for + * an old defrag run, make sure to + * lower the transid of our existing record + */ + if (defrag->transid < entry->transid) + entry->transid = defrag->transid; + if (defrag->last_offset > entry->last_offset) + entry->last_offset = defrag->last_offset; + goto exists; + } + } + BTRFS_I(inode)->in_defrag = 1; + rb_link_node(&defrag->rb_node, parent, p); + rb_insert_color(&defrag->rb_node, &root->fs_info->defrag_inodes); + return 0; + +exists: + kfree(defrag); + return 0; + +} + +/* + * insert a defrag record for this inode if auto defrag is + * enabled + */ +int btrfs_add_inode_defrag(struct btrfs_trans_handle *trans, + struct inode *inode) +{ + struct btrfs_root *root = BTRFS_I(inode)->root; + struct inode_defrag *defrag; + int ret = 0; + u64 transid; + + if (!btrfs_test_opt(root, AUTO_DEFRAG)) + return 0; + + if (root->fs_info->closing) + return 0; + + if (BTRFS_I(inode)->in_defrag) + return 0; + + if (trans) + transid = trans->transid; + else + transid = BTRFS_I(inode)->root->last_trans; + + defrag = kzalloc(sizeof(*defrag), GFP_NOFS); + if (!defrag) + return -ENOMEM; + + defrag->ino = inode->i_ino; + defrag->transid = transid; + defrag->root = root->root_key.objectid; + + spin_lock(&root->fs_info->defrag_inodes_lock); + if (!BTRFS_I(inode)->in_defrag) + ret = __btrfs_add_inode_defrag(inode, defrag); + spin_unlock(&root->fs_info->defrag_inodes_lock); + return ret; +} + +/* + * must be called with the defrag_inodes lock held + */ +struct inode_defrag *btrfs_find_defrag_inode(struct btrfs_fs_info *info, u64 ino, + struct rb_node **next) +{ + struct inode_defrag *entry = NULL; + struct rb_node *p; + struct rb_node *parent = NULL; + + p = info->defrag_inodes.rb_node; + while (p) { + parent = p; + entry = rb_entry(parent, struct inode_defrag, rb_node); + + if (ino < entry->ino) + p = parent->rb_left; + else if (ino > entry->ino) + p = parent->rb_right; + else + return entry; + } + + if (next) { + while (parent && ino > entry->ino) { + parent = rb_next(parent); + entry = rb_entry(parent, struct inode_defrag, rb_node); + } + *next = parent; + } + return NULL; +} + +/* + * run through the list of inodes in the FS that need + * defragging + */ +int btrfs_run_defrag_inodes(struct btrfs_fs_info *fs_info) +{ + struct inode_defrag *defrag; + struct btrfs_root *inode_root; + struct inode *inode; + struct rb_node *n; + struct btrfs_key key; + struct btrfs_ioctl_defrag_range_args range; + u64 first_ino = 0; + int num_defrag; + int defrag_batch = 1024; + + memset(&range, 0, sizeof(range)); + range.len = (u64)-1; + + atomic_inc(&fs_info->defrag_running); + spin_lock(&fs_info->defrag_inodes_lock); + while(1) { + n = NULL; + + /* find an inode to defrag */ + defrag = btrfs_find_defrag_inode(fs_info, first_ino, &n); + if (!defrag) { + if (n) + defrag = rb_entry(n, struct inode_defrag, rb_node); + else if (first_ino) { + first_ino = 0; + continue; + } else { + break; + } + } + + /* remove it from the rbtree */ + first_ino = defrag->ino + 1; + rb_erase(&defrag->rb_node, &fs_info->defrag_inodes); + + if (fs_info->closing) + goto next_free; + + spin_unlock(&fs_info->defrag_inodes_lock); + + /* get the inode */ + key.objectid = defrag->root; + btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY); + key.offset = (u64)-1; + inode_root = btrfs_read_fs_root_no_name(fs_info, &key); + if (IS_ERR(inode_root)) + goto next; + + key.objectid = defrag->ino; + btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY); + key.offset = 0; + + inode = btrfs_iget(fs_info->sb, &key, inode_root, NULL); + if (IS_ERR(inode)) + goto next; + + /* do a chunk of defrag */ + BTRFS_I(inode)->in_defrag = 0; + range.start = defrag->last_offset; + num_defrag = btrfs_defrag_file(inode, NULL, &range, defrag->transid, + defrag_batch); + /* + * if we filled the whole defrag batch, there + * must be more work to do. Queue this defrag + * again + */ + if (num_defrag == defrag_batch) { + defrag->last_offset = range.start; + __btrfs_add_inode_defrag(inode, defrag); + /* + * we don't want to kfree defrag, we added it back to + * the rbtree + */ + defrag = NULL; + } else if (defrag->last_offset && !defrag->cycled) { + /* + * we didn't fill our defrag batch, but + * we didn't start at zero. Make sure we loop + * around to the start of the file. + */ + defrag->last_offset = 0; + defrag->cycled = 1; + __btrfs_add_inode_defrag(inode, defrag); + defrag = NULL; + } + + iput(inode); +next: + spin_lock(&fs_info->defrag_inodes_lock); +next_free: + kfree(defrag); + } + spin_unlock(&fs_info->defrag_inodes_lock); + + atomic_dec(&fs_info->defrag_running); + + /* + * during unmount, we use the transaction_wait queue to + * wait for the defragger to stop + */ + wake_up(&fs_info->transaction_wait); + return 0; +} /* simple helper to fault in pages and copy. This should go away * and be replaced with calls into generic code. diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d378f8b70ef7..bb51bb1fa44f 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -342,6 +342,10 @@ static noinline int compress_file_range(struct inode *inode, int will_compress; int compress_type = root->fs_info->compress_type; + /* if this is a small write inside eof, kick off a defragbot */ + if (end <= BTRFS_I(inode)->disk_i_size && (end - start + 1) < 16 * 1024) + btrfs_add_inode_defrag(NULL, inode); + actual_end = min_t(u64, isize, end + 1); again: will_compress = 0; @@ -799,6 +803,10 @@ static noinline int cow_file_range(struct inode *inode, disk_num_bytes = num_bytes; ret = 0; + /* if this is a small write inside eof, kick off defrag */ + if (end <= BTRFS_I(inode)->disk_i_size && num_bytes < 64 * 1024) + btrfs_add_inode_defrag(trans, inode); + if (start == 0) { /* lets try to make an inline extent */ ret = cow_file_range_inline(trans, root, inode, @@ -5371,6 +5379,9 @@ static struct extent_map *btrfs_new_extent_direct(struct inode *inode, if (IS_ERR(trans)) return ERR_CAST(trans); + if (start <= BTRFS_I(inode)->disk_i_size && len < 64 * 1024) + btrfs_add_inode_defrag(trans, inode); + trans->block_rsv = &root->fs_info->delalloc_block_rsv; alloc_hint = get_extent_allocation_hint(inode, start, len); @@ -6682,6 +6693,7 @@ struct inode *btrfs_alloc_inode(struct super_block *sb) ei->ordered_data_close = 0; ei->orphan_meta_reserved = 0; ei->dummy_inode = 0; + ei->in_defrag = 0; ei->force_compress = BTRFS_COMPRESS_NONE; ei->delayed_node = NULL; diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index c4f17e4e2c9c..85e818ce00c5 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -656,6 +656,106 @@ out_unlock: return error; } +/* + * When we're defragging a range, we don't want to kick it off again + * if it is really just waiting for delalloc to send it down. + * If we find a nice big extent or delalloc range for the bytes in the + * file you want to defrag, we return 0 to let you know to skip this + * part of the file + */ +static int check_defrag_in_cache(struct inode *inode, u64 offset, int thresh) +{ + struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; + struct extent_map *em = NULL; + struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree; + u64 end; + + read_lock(&em_tree->lock); + em = lookup_extent_mapping(em_tree, offset, PAGE_CACHE_SIZE); + read_unlock(&em_tree->lock); + + if (em) { + end = extent_map_end(em); + free_extent_map(em); + if (end - offset > thresh) + return 0; + } + /* if we already have a nice delalloc here, just stop */ + thresh /= 2; + end = count_range_bits(io_tree, &offset, offset + thresh, + thresh, EXTENT_DELALLOC, 1); + if (end >= thresh) + return 0; + return 1; +} + +/* + * helper function to walk through a file and find extents + * newer than a specific transid, and smaller than thresh. + * + * This is used by the defragging code to find new and small + * extents + */ +static int find_new_extents(struct btrfs_root *root, + struct inode *inode, u64 newer_than, + u64 *off, int thresh) +{ + struct btrfs_path *path; + struct btrfs_key min_key; + struct btrfs_key max_key; + struct extent_buffer *leaf; + struct btrfs_file_extent_item *extent; + int type; + int ret; + + path = btrfs_alloc_path(); + if (!path) + return -ENOMEM; + + min_key.objectid = inode->i_ino; + min_key.type = BTRFS_EXTENT_DATA_KEY; + min_key.offset = *off; + + max_key.objectid = inode->i_ino; + max_key.type = (u8)-1; + max_key.offset = (u64)-1; + + path->keep_locks = 1; + + while(1) { + ret = btrfs_search_forward(root, &min_key, &max_key, + path, 0, newer_than); + if (ret != 0) + goto none; + if (min_key.objectid != inode->i_ino) + goto none; + if (min_key.type != BTRFS_EXTENT_DATA_KEY) + goto none; + + leaf = path->nodes[0]; + extent = btrfs_item_ptr(leaf, path->slots[0], + struct btrfs_file_extent_item); + + type = btrfs_file_extent_type(leaf, extent); + if (type == BTRFS_FILE_EXTENT_REG && + btrfs_file_extent_num_bytes(leaf, extent) < thresh && + check_defrag_in_cache(inode, min_key.offset, thresh)) { + *off = min_key.offset; + btrfs_free_path(path); + return 0; + } + + if (min_key.offset == (u64)-1) + goto none; + + min_key.offset++; + btrfs_release_path(path); + } +none: + btrfs_free_path(path); + return -ENOENT; +} + static int should_defrag_range(struct inode *inode, u64 start, u64 len, int thresh, u64 *last_len, u64 *skip, u64 *defrag_end) @@ -665,10 +765,6 @@ static int should_defrag_range(struct inode *inode, u64 start, u64 len, struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree; int ret = 1; - - if (thresh == 0) - thresh = 256 * 1024; - /* * make sure that once we start defragging and extent, we keep on * defragging it @@ -727,27 +823,176 @@ static int should_defrag_range(struct inode *inode, u64 start, u64 len, return ret; } -static int btrfs_defrag_file(struct file *file, - struct btrfs_ioctl_defrag_range_args *range) +/* + * it doesn't do much good to defrag one or two pages + * at a time. This pulls in a nice chunk of pages + * to COW and defrag. + * + * It also makes sure the delalloc code has enough + * dirty data to avoid making new small extents as part + * of the defrag + * + * It's a good idea to start RA on this range + * before calling this. + */ +static int cluster_pages_for_defrag(struct inode *inode, + struct page **pages, + unsigned long start_index, + int num_pages) { - struct inode *inode = fdentry(file)->d_inode; - struct btrfs_root *root = BTRFS_I(inode)->root; - struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree; + unsigned long file_end; + u64 isize = i_size_read(inode); + u64 page_start; + u64 page_end; + int ret; + int i; + int i_done; struct btrfs_ordered_extent *ordered; - struct page *page; + struct extent_state *cached_state = NULL; + + if (isize == 0) + return 0; + file_end = (isize - 1) >> PAGE_CACHE_SHIFT; + + ret = btrfs_delalloc_reserve_space(inode, + num_pages << PAGE_CACHE_SHIFT); + if (ret) + return ret; +again: + ret = 0; + i_done = 0; + + /* step one, lock all the pages */ + for (i = 0; i < num_pages; i++) { + struct page *page; + page = grab_cache_page(inode->i_mapping, + start_index + i); + if (!page) + break; + + if (!PageUptodate(page)) { + btrfs_readpage(NULL, page); + lock_page(page); + if (!PageUptodate(page)) { + unlock_page(page); + page_cache_release(page); + ret = -EIO; + break; + } + } + isize = i_size_read(inode); + file_end = (isize - 1) >> PAGE_CACHE_SHIFT; + if (!isize || page->index > file_end || + page->mapping != inode->i_mapping) { + /* whoops, we blew past eof, skip this page */ + unlock_page(page); + page_cache_release(page); + break; + } + pages[i] = page; + i_done++; + } + if (!i_done || ret) + goto out; + + if (!(inode->i_sb->s_flags & MS_ACTIVE)) + goto out; + + /* + * so now we have a nice long stream of locked + * and up to date pages, lets wait on them + */ + for (i = 0; i < i_done; i++) + wait_on_page_writeback(pages[i]); + + page_start = page_offset(pages[0]); + page_end = page_offset(pages[i_done - 1]) + PAGE_CACHE_SIZE; + + lock_extent_bits(&BTRFS_I(inode)->io_tree, + page_start, page_end - 1, 0, &cached_state, + GFP_NOFS); + ordered = btrfs_lookup_first_ordered_extent(inode, page_end - 1); + if (ordered && + ordered->file_offset + ordered->len > page_start && + ordered->file_offset < page_end) { + btrfs_put_ordered_extent(ordered); + unlock_extent_cached(&BTRFS_I(inode)->io_tree, + page_start, page_end - 1, + &cached_state, GFP_NOFS); + for (i = 0; i < i_done; i++) { + unlock_page(pages[i]); + page_cache_release(pages[i]); + } + btrfs_wait_ordered_range(inode, page_start, + page_end - page_start); + goto again; + } + if (ordered) + btrfs_put_ordered_extent(ordered); + + clear_extent_bit(&BTRFS_I(inode)->io_tree, page_start, + page_end - 1, EXTENT_DIRTY | EXTENT_DELALLOC | + EXTENT_DO_ACCOUNTING, 0, 0, &cached_state, + GFP_NOFS); + + if (i_done != num_pages) { + atomic_inc(&BTRFS_I(inode)->outstanding_extents); + btrfs_delalloc_release_space(inode, + (num_pages - i_done) << PAGE_CACHE_SHIFT); + } + + + btrfs_set_extent_delalloc(inode, page_start, page_end - 1, + &cached_state); + + unlock_extent_cached(&BTRFS_I(inode)->io_tree, + page_start, page_end - 1, &cached_state, + GFP_NOFS); + + for (i = 0; i < i_done; i++) { + clear_page_dirty_for_io(pages[i]); + ClearPageChecked(pages[i]); + set_page_extent_mapped(pages[i]); + set_page_dirty(pages[i]); + unlock_page(pages[i]); + page_cache_release(pages[i]); + } + return i_done; +out: + for (i = 0; i < i_done; i++) { + unlock_page(pages[i]); + page_cache_release(pages[i]); + } + btrfs_delalloc_release_space(inode, num_pages << PAGE_CACHE_SHIFT); + return ret; + +} + +int btrfs_defrag_file(struct inode *inode, struct file *file, + struct btrfs_ioctl_defrag_range_args *range, + u64 newer_than, unsigned long max_to_defrag) +{ + struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_super_block *disk_super; + struct file_ra_state *ra = NULL; unsigned long last_index; - unsigned long ra_pages = root->fs_info->bdi.ra_pages; - unsigned long total_read = 0; u64 features; - u64 page_start; - u64 page_end; u64 last_len = 0; u64 skip = 0; u64 defrag_end = 0; + u64 newer_off = range->start; + int newer_left = 0; unsigned long i; int ret; + int defrag_count = 0; int compress_type = BTRFS_COMPRESS_ZLIB; + int extent_thresh = range->extent_thresh; + int newer_cluster = (256 * 1024) >> PAGE_CACHE_SHIFT; + u64 new_align = ~((u64)128 * 1024 - 1); + struct page **pages = NULL; + + if (extent_thresh == 0) + extent_thresh = 256 * 1024; if (range->flags & BTRFS_DEFRAG_RANGE_COMPRESS) { if (range->compress_type > BTRFS_COMPRESS_TYPES) @@ -759,6 +1004,27 @@ static int btrfs_defrag_file(struct file *file, if (inode->i_size == 0) return 0; + /* + * if we were not given a file, allocate a readahead + * context + */ + if (!file) { + ra = kzalloc(sizeof(*ra), GFP_NOFS); + if (!ra) + return -ENOMEM; + file_ra_state_init(ra, inode->i_mapping); + } else { + ra = &file->f_ra; + } + + pages = kmalloc(sizeof(struct page *) * newer_cluster, + GFP_NOFS); + if (!pages) { + ret = -ENOMEM; + goto out_ra; + } + + /* find the last page to defrag */ if (range->start + range->len > range->start) { last_index = min_t(u64, inode->i_size - 1, range->start + range->len - 1) >> PAGE_CACHE_SHIFT; @@ -766,11 +1032,37 @@ static int btrfs_defrag_file(struct file *file, last_index = (inode->i_size - 1) >> PAGE_CACHE_SHIFT; } - i = range->start >> PAGE_CACHE_SHIFT; - while (i <= last_index) { - if (!should_defrag_range(inode, (u64)i << PAGE_CACHE_SHIFT, + if (newer_than) { + ret = find_new_extents(root, inode, newer_than, + &newer_off, 64 * 1024); + if (!ret) { + range->start = newer_off; + /* + * we always align our defrag to help keep + * the extents in the file evenly spaced + */ + i = (newer_off & new_align) >> PAGE_CACHE_SHIFT; + newer_left = newer_cluster; + } else + goto out_ra; + } else { + i = range->start >> PAGE_CACHE_SHIFT; + } + if (!max_to_defrag) + max_to_defrag = last_index - 1; + + while (i <= last_index && defrag_count < max_to_defrag) { + /* + * make sure we stop running if someone unmounts + * the FS + */ + if (!(inode->i_sb->s_flags & MS_ACTIVE)) + break; + + if (!newer_than && + !should_defrag_range(inode, (u64)i << PAGE_CACHE_SHIFT, PAGE_CACHE_SIZE, - range->extent_thresh, + extent_thresh, &last_len, &skip, &defrag_end)) { unsigned long next; @@ -782,92 +1074,39 @@ static int btrfs_defrag_file(struct file *file, i = max(i + 1, next); continue; } - - if (total_read % ra_pages == 0) { - btrfs_force_ra(inode->i_mapping, &file->f_ra, file, i, - min(last_index, i + ra_pages - 1)); - } - total_read++; - mutex_lock(&inode->i_mutex); if (range->flags & BTRFS_DEFRAG_RANGE_COMPRESS) BTRFS_I(inode)->force_compress = compress_type; - ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE); - if (ret) - goto err_unlock; -again: - if (inode->i_size == 0 || - i > ((inode->i_size - 1) >> PAGE_CACHE_SHIFT)) { - ret = 0; - goto err_reservations; - } + btrfs_force_ra(inode->i_mapping, ra, file, i, newer_cluster); - page = grab_cache_page(inode->i_mapping, i); - if (!page) { - ret = -ENOMEM; - goto err_reservations; - } - - if (!PageUptodate(page)) { - btrfs_readpage(NULL, page); - lock_page(page); - if (!PageUptodate(page)) { - unlock_page(page); - page_cache_release(page); - ret = -EIO; - goto err_reservations; - } - } - - if (page->mapping != inode->i_mapping) { - unlock_page(page); - page_cache_release(page); - goto again; - } - - wait_on_page_writeback(page); + ret = cluster_pages_for_defrag(inode, pages, i, newer_cluster); + if (ret < 0) + goto out_ra; - if (PageDirty(page)) { - btrfs_delalloc_release_space(inode, PAGE_CACHE_SIZE); - goto loop_unlock; - } + defrag_count += ret; + balance_dirty_pages_ratelimited_nr(inode->i_mapping, ret); + i += ret; - page_start = (u64)page->index << PAGE_CACHE_SHIFT; - page_end = page_start + PAGE_CACHE_SIZE - 1; - lock_extent(io_tree, page_start, page_end, GFP_NOFS); + if (newer_than) { + if (newer_off == (u64)-1) + break; - ordered = btrfs_lookup_ordered_extent(inode, page_start); - if (ordered) { - unlock_extent(io_tree, page_start, page_end, GFP_NOFS); - unlock_page(page); - page_cache_release(page); - btrfs_start_ordered_extent(inode, ordered, 1); - btrfs_put_ordered_extent(ordered); - goto again; + newer_off = max(newer_off + 1, + (u64)i << PAGE_CACHE_SHIFT); + + ret = find_new_extents(root, inode, + newer_than, &newer_off, + 64 * 1024); + if (!ret) { + range->start = newer_off; + i = (newer_off & new_align) >> PAGE_CACHE_SHIFT; + newer_left = newer_cluster; + } else { + break; + } + } else { + i++; } - set_page_extent_mapped(page); - - /* - * this makes sure page_mkwrite is called on the - * page if it is dirtied again later - */ - clear_page_dirty_for_io(page); - clear_extent_bits(&BTRFS_I(inode)->io_tree, page_start, - page_end, EXTENT_DIRTY | EXTENT_DELALLOC | - EXTENT_DO_ACCOUNTING, GFP_NOFS); - - btrfs_set_extent_delalloc(inode, page_start, page_end, NULL); - ClearPageChecked(page); - set_page_dirty(page); - unlock_extent(io_tree, page_start, page_end, GFP_NOFS); - -loop_unlock: - unlock_page(page); - page_cache_release(page); - mutex_unlock(&inode->i_mutex); - - balance_dirty_pages_ratelimited_nr(inode->i_mapping, 1); - i++; } if ((range->flags & BTRFS_DEFRAG_RANGE_START_IO)) @@ -899,12 +1138,14 @@ loop_unlock: btrfs_set_super_incompat_flags(disk_super, features); } - return 0; + if (!file) + kfree(ra); + return defrag_count; -err_reservations: - btrfs_delalloc_release_space(inode, PAGE_CACHE_SIZE); -err_unlock: - mutex_unlock(&inode->i_mutex); +out_ra: + if (!file) + kfree(ra); + kfree(pages); return ret; } @@ -1756,7 +1997,10 @@ static int btrfs_ioctl_defrag(struct file *file, void __user *argp) /* the rest are all set to zero by kzalloc */ range->len = (u64)-1; } - ret = btrfs_defrag_file(file, range); + ret = btrfs_defrag_file(fdentry(file)->d_inode, file, + range, 0, 0); + if (ret > 0) + ret = 0; kfree(range); break; default: diff --git a/fs/btrfs/ioctl.h b/fs/btrfs/ioctl.h index e5e0ee2cad4e..ad1ea789fcb4 100644 --- a/fs/btrfs/ioctl.h +++ b/fs/btrfs/ioctl.h @@ -181,37 +181,6 @@ struct btrfs_ioctl_clone_range_args { #define BTRFS_DEFRAG_RANGE_COMPRESS 1 #define BTRFS_DEFRAG_RANGE_START_IO 2 -struct btrfs_ioctl_defrag_range_args { - /* start of the defrag operation */ - __u64 start; - - /* number of bytes to defrag, use (u64)-1 to say all */ - __u64 len; - - /* - * flags for the operation, which can include turning - * on compression for this one defrag - */ - __u64 flags; - - /* - * any extent bigger than this will be considered - * already defragged. Use 0 to take the kernel default - * Use 1 to say every single extent must be rewritten - */ - __u32 extent_thresh; - - /* - * which compression method to use if turning on compression - * for this defrag operation. If unspecified, zlib will - * be used - */ - __u32 compress_type; - - /* spare for later */ - __u32 unused[4]; -}; - struct btrfs_ioctl_space_info { __u64 flags; __u64 total_bytes; diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index cd0c7cd2c8fb..28e3cb2607ff 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -160,7 +160,7 @@ enum { Opt_compress_type, Opt_compress_force, Opt_compress_force_type, Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_discard, Opt_space_cache, Opt_clear_cache, Opt_user_subvol_rm_allowed, - Opt_enospc_debug, Opt_subvolrootid, Opt_err, + Opt_enospc_debug, Opt_subvolrootid, Opt_defrag, Opt_err, }; static match_table_t tokens = { @@ -191,6 +191,7 @@ static match_table_t tokens = { {Opt_user_subvol_rm_allowed, "user_subvol_rm_allowed"}, {Opt_enospc_debug, "enospc_debug"}, {Opt_subvolrootid, "subvolrootid=%d"}, + {Opt_defrag, "autodefrag"}, {Opt_err, NULL}, }; @@ -369,6 +370,10 @@ int btrfs_parse_options(struct btrfs_root *root, char *options) case Opt_enospc_debug: btrfs_set_opt(info->mount_opt, ENOSPC_DEBUG); break; + case Opt_defrag: + printk(KERN_INFO "btrfs: enabling auto defrag"); + btrfs_set_opt(info->mount_opt, AUTO_DEFRAG); + break; case Opt_err: printk(KERN_INFO "btrfs: unrecognized mount option " "'%s'\n", p); -- cgit v1.2.3 From c309df07868baa8b05d2a70637096465746fdbb5 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 26 May 2011 17:43:59 -0400 Subject: Btrfs: return -ENOMEM in clear_extent_bit The btrfs releasepage function depends on ENOMEM coming back when it is called atomic. Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index a90c4a12556b..0e0fe0f6ec75 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -485,7 +485,8 @@ int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end, again: if (!prealloc && (mask & __GFP_WAIT)) { prealloc = alloc_extent_state(mask); - BUG_ON(!prealloc); + if (!prealloc) + return -ENOMEM; } spin_lock(&tree->lock); -- cgit v1.2.3 From 00d01bc17cc2807292303961519d9c005794eb1d Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Wed, 25 May 2011 12:22:50 +0000 Subject: btrfs scrub: don't coalesce pages that are logically discontiguous scrub_page collects several pages into one bio as long as they are physically contiguous. As we only save one logical address for the whole bio, don't collect pages that are physically contiguous but logically discontiguous. Signed-off-by: Arne Jansen Signed-off-by: Chris Mason --- fs/btrfs/scrub.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 87a2f1273136..6dfed0c27ac3 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -631,7 +631,8 @@ again: if (sbio->count == 0) { sbio->physical = physical; sbio->logical = logical; - } else if (sbio->physical + sbio->count * PAGE_SIZE != physical) { + } else if (sbio->physical + sbio->count * PAGE_SIZE != physical || + sbio->logical + sbio->count * PAGE_SIZE != logical) { scrub_submit(sdev); goto again; } -- cgit v1.2.3 From a47d6b70e280401d553e7cac6f5750870de1ad21 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Thu, 26 May 2011 06:38:30 +0000 Subject: Btrfs: setup free ino caching in a more asynchronous way For a filesystem that has lots of files in it, the first time we mount it with free ino caching support, it can take quite a long time to setup the caching before we can create new files. Here we fill the cache with [highest_ino, BTRFS_LAST_FREE_OBJECTID] before we start the caching thread to search through the extent tree. Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/inode-map.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/inode-map.c b/fs/btrfs/inode-map.c index 000970512624..3262cd17a12f 100644 --- a/fs/btrfs/inode-map.c +++ b/fs/btrfs/inode-map.c @@ -60,12 +60,12 @@ again: while (1) { smp_mb(); - if (fs_info->closing > 1) + if (fs_info->closing) goto out; leaf = path->nodes[0]; slot = path->slots[0]; - if (path->slots[0] >= btrfs_header_nritems(leaf)) { + if (slot >= btrfs_header_nritems(leaf)) { ret = btrfs_next_leaf(root, path); if (ret < 0) goto out; @@ -100,7 +100,7 @@ again: if (key.type != BTRFS_INODE_ITEM_KEY) goto next; - if (key.objectid >= BTRFS_LAST_FREE_OBJECTID) + if (key.objectid >= root->highest_objectid) break; if (last != (u64)-1 && last + 1 != key.objectid) { @@ -114,9 +114,9 @@ next: path->slots[0]++; } - if (last < BTRFS_LAST_FREE_OBJECTID - 1) { + if (last < root->highest_objectid - 1) { __btrfs_add_free_space(ctl, last + 1, - BTRFS_LAST_FREE_OBJECTID - last - 1); + root->highest_objectid - last - 1); } spin_lock(&root->cache_lock); @@ -136,8 +136,10 @@ out: static void start_caching(struct btrfs_root *root) { + struct btrfs_free_space_ctl *ctl = root->free_ino_ctl; struct task_struct *tsk; int ret; + u64 objectid; spin_lock(&root->cache_lock); if (root->cached != BTRFS_CACHE_NO) { @@ -156,6 +158,19 @@ static void start_caching(struct btrfs_root *root) return; } + /* + * It can be quite time-consuming to fill the cache by searching + * through the extent tree, and this can keep ino allocation path + * waiting. Therefore at start we quickly find out the highest + * inode number and we know we can use inode numbers which fall in + * [highest_ino + 1, BTRFS_LAST_FREE_OBJECTID]. + */ + ret = btrfs_find_free_objectid(root, &objectid); + if (!ret && objectid <= BTRFS_LAST_FREE_OBJECTID) { + __btrfs_add_free_space(ctl, objectid, + BTRFS_LAST_FREE_OBJECTID - objectid + 1); + } + tsk = kthread_run(caching_kthread, root, "btrfs-ino-cache-%llu\n", root->root_key.objectid); BUG_ON(IS_ERR(tsk)); @@ -209,7 +224,8 @@ again: start_caching(root); - if (objectid <= root->cache_progress) + if (objectid <= root->cache_progress || + objectid > root->highest_objectid) __btrfs_add_free_space(ctl, objectid, 1); else __btrfs_add_free_space(pinned, objectid, 1); -- cgit v1.2.3 From 0775a60aca2375ea5598741b30d13fe6d3f15617 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 27 May 2011 00:05:23 +0200 Subject: PM: Fix PM QOS's user mode interface to work with ASCII input Make pm_qos_power_write() accept values passed to it in the ASCII hex format either with or without an ending newline. Signed-off-by: Rafael J. Wysocki Acked-by: Mark Gross --- kernel/pm_qos_params.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-) diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c index 0da058bff8eb..68df076fec5d 100644 --- a/kernel/pm_qos_params.c +++ b/kernel/pm_qos_params.c @@ -40,6 +40,7 @@ #include #include #include +#include #include @@ -404,24 +405,36 @@ static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf, size_t count, loff_t *f_pos) { s32 value; - int x; - char ascii_value[11]; struct pm_qos_request_list *pm_qos_req; if (count == sizeof(s32)) { if (copy_from_user(&value, buf, sizeof(s32))) return -EFAULT; - } else if (count == 11) { /* len('0x12345678/0') */ - if (copy_from_user(ascii_value, buf, 11)) + } else if (count <= 11) { /* ASCII perhaps? */ + char ascii_value[11]; + unsigned long int ulval; + int ret; + + if (copy_from_user(ascii_value, buf, count)) return -EFAULT; - if (strlen(ascii_value) != 10) - return -EINVAL; - x = sscanf(ascii_value, "%x", &value); - if (x != 1) + + if (count > 10) { + if (ascii_value[10] == '\n') + ascii_value[10] = '\0'; + else + return -EINVAL; + } else { + ascii_value[count] = '\0'; + } + ret = strict_strtoul(ascii_value, 16, &ulval); + if (ret) { + pr_debug("%s, 0x%lx, 0x%x\n", ascii_value, ulval, ret); return -EINVAL; - pr_debug("%s, %d, 0x%x\n", ascii_value, x, value); - } else + } + value = (s32)lower_32_bits(ulval); + } else { return -EINVAL; + } pm_qos_req = filp->private_data; pm_qos_update_request(pm_qos_req, value); -- cgit v1.2.3 From 7fe4fc881d1340f17396f52c836e597dadadea42 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 25 May 2011 10:33:17 -0700 Subject: Intel xhci: Add PCI id for Panther Point xHCI host. This adds the PCI ID for the xHCI (USB 3.0) host controller in the Intel Panther Point chipset. It will be used by both the EHCI and xHCI driver in the following patches. Signed-off-by: Sarah Sharp --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 24787b751286..a311008af5e1 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2483,6 +2483,7 @@ #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI 0x1e31 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e40 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310 -- cgit v1.2.3 From 06caa7ad8341db2f03165fa763559475cc404584 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 24 May 2011 23:06:52 +0200 Subject: gpio: move U300 GPIO driver to drivers/gpio This moves the U300 GPIO driver out of arch/arm/mach-u300 and into the desired location indicated by the subsystem maintainer. Signed-off-by: Linus Walleij Signed-off-by: Grant Likely --- arch/arm/mach-u300/Makefile | 2 +- arch/arm/mach-u300/gpio.c | 700 -------------------------------------------- drivers/gpio/Makefile | 1 + drivers/gpio/gpio-u300.c | 700 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 702 insertions(+), 701 deletions(-) delete mode 100644 arch/arm/mach-u300/gpio.c create mode 100644 drivers/gpio/gpio-u300.c diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile index fab46fe9a71f..8fd354aaf0a7 100644 --- a/arch/arm/mach-u300/Makefile +++ b/arch/arm/mach-u300/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel, U300 machine. # -obj-y := core.o clock.o timer.o gpio.o padmux.o +obj-y := core.o clock.o timer.o padmux.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c deleted file mode 100644 index d92790140fe5..000000000000 --- a/arch/arm/mach-u300/gpio.c +++ /dev/null @@ -1,700 +0,0 @@ -/* - * - * arch/arm/mach-u300/gpio.c - * - * - * Copyright (C) 2007-2009 ST-Ericsson AB - * License terms: GNU General Public License (GPL) version 2 - * U300 GPIO module. - * This can driver either of the two basic GPIO cores - * available in the U300 platforms: - * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) - * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0) - * Notice that you also have inline macros in - * Author: Linus Walleij - * Author: Jonas Aaberg - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Reference to GPIO block clock */ -static struct clk *clk; - -/* Memory resource */ -static struct resource *memres; -static void __iomem *virtbase; -static struct device *gpiodev; - -struct u300_gpio_port { - const char *name; - int irq; - int number; -}; - - -static struct u300_gpio_port gpio_ports[] = { - { - .name = "gpio0", - .number = 0, - }, - { - .name = "gpio1", - .number = 1, - }, - { - .name = "gpio2", - .number = 2, - }, -#ifdef U300_COH901571_3 - { - .name = "gpio3", - .number = 3, - }, - { - .name = "gpio4", - .number = 4, - }, -#ifdef CONFIG_MACH_U300_BS335 - { - .name = "gpio5", - .number = 5, - }, - { - .name = "gpio6", - .number = 6, - }, -#endif -#endif - -}; - - -#ifdef U300_COH901571_3 - -/* Default input value */ -#define DEFAULT_OUTPUT_LOW 0 -#define DEFAULT_OUTPUT_HIGH 1 - -/* GPIO Pull-Up status */ -#define DISABLE_PULL_UP 0 -#define ENABLE_PULL_UP 1 - -#define GPIO_NOT_USED 0 -#define GPIO_IN 1 -#define GPIO_OUT 2 - -struct u300_gpio_configuration_data { - unsigned char pin_usage; - unsigned char default_output_value; - unsigned char pull_up; -}; - -/* Initial configuration */ -const struct u300_gpio_configuration_data -u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { -#ifdef CONFIG_MACH_U300_BS335 - /* Port 0, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 1, pins 0-7 */ - { - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 2, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - }, - /* Port 3, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 4, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 5, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 6, pind 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - } -#endif - -#ifdef CONFIG_MACH_U300_BS365 - /* Port 0, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 1, pins 0-7 */ - { - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} - }, - /* Port 2, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - }, - /* Port 3, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - }, - /* Port 4, pins 0-7 */ - { - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - /* These 4 pins doesn't exist on DB3210 */ - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, - {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} - } -#endif -}; -#endif - - -/* No users == we can power down GPIO */ -static int gpio_users; - -struct gpio_struct { - int (*callback)(void *); - void *data; - int users; -}; - -static struct gpio_struct gpio_pin[U300_GPIO_MAX]; - -/* - * Let drivers register callback in order to get notified when there is - * an interrupt on the gpio pin - */ -int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data) -{ - if (gpio_pin[gpio].callback) - dev_warn(gpiodev, "%s: WARNING: callback already " - "registered for gpio pin#%d\n", __func__, gpio); - gpio_pin[gpio].callback = func; - gpio_pin[gpio].data = data; - - return 0; -} -EXPORT_SYMBOL(gpio_register_callback); - -int gpio_unregister_callback(unsigned gpio) -{ - if (!gpio_pin[gpio].callback) - dev_warn(gpiodev, "%s: WARNING: callback already " - "unregistered for gpio pin#%d\n", __func__, gpio); - gpio_pin[gpio].callback = NULL; - gpio_pin[gpio].data = NULL; - - return 0; -} -EXPORT_SYMBOL(gpio_unregister_callback); - -/* Non-zero means valid */ -int gpio_is_valid(int number) -{ - if (number >= 0 && - number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT)) - return 1; - return 0; -} -EXPORT_SYMBOL(gpio_is_valid); - -int gpio_request(unsigned gpio, const char *label) -{ - if (gpio_pin[gpio].users) - return -EINVAL; - else - gpio_pin[gpio].users++; - - gpio_users++; - - return 0; -} -EXPORT_SYMBOL(gpio_request); - -void gpio_free(unsigned gpio) -{ - gpio_users--; - gpio_pin[gpio].users--; - if (unlikely(gpio_pin[gpio].users < 0)) { - dev_warn(gpiodev, "warning: gpio#%d release mismatch\n", - gpio); - gpio_pin[gpio].users = 0; - } - - return; -} -EXPORT_SYMBOL(gpio_free); - -/* This returns zero or nonzero */ -int gpio_get_value(unsigned gpio) -{ - return readl(virtbase + U300_GPIO_PXPDIR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07)); -} -EXPORT_SYMBOL(gpio_get_value); - -/* - * We hope that the compiler will optimize away the unused branch - * in case "value" is a constant - */ -void gpio_set_value(unsigned gpio, int value) -{ - u32 val; - unsigned long flags; - - local_irq_save(flags); - if (value) { - /* set */ - val = readl(virtbase + U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) - & (1 << (gpio & 0x07)); - writel(val | (1 << (gpio & 0x07)), virtbase + - U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } else { - /* clear */ - val = readl(virtbase + U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) - & (1 << (gpio & 0x07)); - writel(val & ~(1 << (gpio & 0x07)), virtbase + - U300_GPIO_PXPDOR + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_set_value); - -int gpio_direction_input(unsigned gpio) -{ - unsigned long flags; - u32 val; - - if (gpio > U300_GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - /* Mask out this pin*/ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); - /* This is not needed since it sets the bits to zero.*/ - /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */ - writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(gpio_direction_input); - -int gpio_direction_output(unsigned gpio, int value) -{ - unsigned long flags; - u32 val; - - if (gpio > U300_GPIO_MAX) - return -EINVAL; - - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - /* Mask out this pin */ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); - /* - * FIXME: configure for push/pull, open drain or open source per pin - * in setup. The current driver will only support push/pull. - */ - val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL - << ((gpio & 0x07) << 1)); - writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - gpio_set_value(gpio, value); - local_irq_restore(flags); - return 0; -} -EXPORT_SYMBOL(gpio_direction_output); - -/* - * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0). - */ -void enable_irq_on_gpio_pin(unsigned gpio, int edge) -{ - u32 val; - unsigned long flags; - local_irq_save(flags); - - val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val |= (1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - if (edge) - val |= (1 << (gpio & 0x07)); - else - val &= ~(1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); -} -EXPORT_SYMBOL(enable_irq_on_gpio_pin); - -void disable_irq_on_gpio_pin(unsigned gpio) -{ - u32 val; - unsigned long flags; - - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - val &= ~(1 << (gpio & 0x07)); - writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); -} -EXPORT_SYMBOL(disable_irq_on_gpio_pin); - -/* Enable (value == 0) or disable (value == 1) internal pullup */ -void gpio_pullup(unsigned gpio, int value) -{ - u32 val; - unsigned long flags; - - local_irq_save(flags); - if (value) { - val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } else { - val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * - U300_GPIO_PORTX_SPACING); - writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + - PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); - } - local_irq_restore(flags); -} -EXPORT_SYMBOL(gpio_pullup); - -static irqreturn_t gpio_irq_handler(int irq, void *dev_id) -{ - struct u300_gpio_port *port = dev_id; - u32 val; - int pin; - - /* Read event register */ - val = readl(virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Mask with enable register */ - val &= readl(virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Mask relevant bits */ - val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK; - /* ACK IRQ (clear event) */ - writel(val, virtbase + U300_GPIO_PXIEV + port->number * - U300_GPIO_PORTX_SPACING); - /* Print message */ - while (val != 0) { - unsigned gpio; - - pin = __ffs(val); - /* mask off this pin */ - val &= ~(1 << pin); - gpio = (port->number << 3) + pin; - - if (gpio_pin[gpio].callback) - (void)gpio_pin[gpio].callback(gpio_pin[gpio].data); - else - dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n", - gpio); - } - return IRQ_HANDLED; -} - -static void gpio_set_initial_values(void) -{ -#ifdef U300_COH901571_3 - int i, j; - unsigned long flags; - u32 val; - - /* Write default values to all pins */ - for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { - val = 0; - for (j = 0; j < 8; j++) - val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j; - local_irq_save(flags); - writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - } - - /* - * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED' - * to output and 'GPIO_IN' to input for each port. And initialize - * default value on outputs. - */ - for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { - for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) { - local_irq_save(flags); - val = readl(virtbase + U300_GPIO_PXPCR + - i * U300_GPIO_PORTX_SPACING); - /* Mask out this pin */ - val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1)); - - if (u300_gpio_config[i][j].pin_usage != GPIO_IN) - val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1)); - writel(val, virtbase + U300_GPIO_PXPCR + - i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - } - } - - /* Enable or disable the internal pull-ups in the GPIO ASIC block */ - for (i = 0; i < U300_GPIO_MAX; i++) { - val = 0; - for (j = 0; j < 8; j++) - val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j); - local_irq_save(flags); - writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING); - local_irq_restore(flags); - } -#endif -} - -static int __init gpio_probe(struct platform_device *pdev) -{ - u32 val; - int err = 0; - int i; - int num_irqs; - - gpiodev = &pdev->dev; - memset(gpio_pin, 0, sizeof(gpio_pin)); - - /* Get GPIO clock */ - clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) { - err = PTR_ERR(clk); - dev_err(gpiodev, "could not get GPIO clock\n"); - goto err_no_clk; - } - err = clk_enable(clk); - if (err) { - dev_err(gpiodev, "could not enable GPIO clock\n"); - goto err_no_clk_enable; - } - - memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!memres) - goto err_no_resource; - - if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller") - == NULL) { - err = -ENODEV; - goto err_no_ioregion; - } - - virtbase = ioremap(memres->start, resource_size(memres)); - if (!virtbase) { - err = -ENOMEM; - goto err_no_ioremap; - } - dev_info(gpiodev, "remapped 0x%08x to %p\n", - memres->start, virtbase); - -#ifdef U300_COH901335 - dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n"); - /* Turn on the GPIO block */ - writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR); -#endif - -#ifdef U300_COH901571_3 - dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n"); - val = readl(virtbase + U300_GPIO_CR); - dev_info(gpiodev, "COH901571/3 block version: %d, " \ - "number of cores: %d\n", - ((val & 0x0000FE00) >> 9), - ((val & 0x000001FC) >> 2)); - writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR); -#endif - - gpio_set_initial_values(); - - for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) { - - gpio_ports[num_irqs].irq = - platform_get_irq_byname(pdev, - gpio_ports[num_irqs].name); - - err = request_irq(gpio_ports[num_irqs].irq, - gpio_irq_handler, IRQF_DISABLED, - gpio_ports[num_irqs].name, - &gpio_ports[num_irqs]); - if (err) { - dev_err(gpiodev, "cannot allocate IRQ for %s!\n", - gpio_ports[num_irqs].name); - goto err_no_irq; - } - /* Turns off PortX_irq_force */ - writel(0x0, virtbase + U300_GPIO_PXIFR + - num_irqs * U300_GPIO_PORTX_SPACING); - } - - return 0; - - err_no_irq: - for (i = 0; i < num_irqs; i++) - free_irq(gpio_ports[i].irq, &gpio_ports[i]); - iounmap(virtbase); - err_no_ioremap: - release_mem_region(memres->start, memres->end - memres->start); - err_no_ioregion: - err_no_resource: - clk_disable(clk); - err_no_clk_enable: - clk_put(clk); - err_no_clk: - dev_info(gpiodev, "module ERROR:%d\n", err); - return err; -} - -static int __exit gpio_remove(struct platform_device *pdev) -{ - int i; - - /* Turn off the GPIO block */ - writel(0x00000000U, virtbase + U300_GPIO_CR); - for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++) - free_irq(gpio_ports[i].irq, &gpio_ports[i]); - iounmap(virtbase); - release_mem_region(memres->start, memres->end - memres->start); - clk_disable(clk); - clk_put(clk); - return 0; -} - -static struct platform_driver gpio_driver = { - .driver = { - .name = "u300-gpio", - }, - .remove = __exit_p(gpio_remove), -}; - - -static int __init u300_gpio_init(void) -{ - return platform_driver_probe(&gpio_driver, gpio_probe); -} - -static void __exit u300_gpio_exit(void) -{ - platform_driver_unregister(&gpio_driver); -} - -arch_initcall(u300_gpio_init); -module_exit(u300_gpio_exit); - -MODULE_AUTHOR("Linus Walleij "); - -#ifdef U300_COH901571_3 -MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver"); -#endif - -#ifdef U300_COH901335 -MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver"); -#endif - -MODULE_LICENSE("GPL"); diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index d92ce3a62ae5..27a22086739b 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o obj-$(CONFIG_GPIO_SCH) += sch_gpio.o +obj-$(CONFIG_MACH_U300) += gpio-u300.o obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o obj-$(CONFIG_GPIO_SX150X) += sx150x.o diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c new file mode 100644 index 000000000000..d92790140fe5 --- /dev/null +++ b/drivers/gpio/gpio-u300.c @@ -0,0 +1,700 @@ +/* + * + * arch/arm/mach-u300/gpio.c + * + * + * Copyright (C) 2007-2009 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * U300 GPIO module. + * This can driver either of the two basic GPIO cores + * available in the U300 platforms: + * COH 901 335 - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0) + * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0) + * Notice that you also have inline macros in + * Author: Linus Walleij + * Author: Jonas Aaberg + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Reference to GPIO block clock */ +static struct clk *clk; + +/* Memory resource */ +static struct resource *memres; +static void __iomem *virtbase; +static struct device *gpiodev; + +struct u300_gpio_port { + const char *name; + int irq; + int number; +}; + + +static struct u300_gpio_port gpio_ports[] = { + { + .name = "gpio0", + .number = 0, + }, + { + .name = "gpio1", + .number = 1, + }, + { + .name = "gpio2", + .number = 2, + }, +#ifdef U300_COH901571_3 + { + .name = "gpio3", + .number = 3, + }, + { + .name = "gpio4", + .number = 4, + }, +#ifdef CONFIG_MACH_U300_BS335 + { + .name = "gpio5", + .number = 5, + }, + { + .name = "gpio6", + .number = 6, + }, +#endif +#endif + +}; + + +#ifdef U300_COH901571_3 + +/* Default input value */ +#define DEFAULT_OUTPUT_LOW 0 +#define DEFAULT_OUTPUT_HIGH 1 + +/* GPIO Pull-Up status */ +#define DISABLE_PULL_UP 0 +#define ENABLE_PULL_UP 1 + +#define GPIO_NOT_USED 0 +#define GPIO_IN 1 +#define GPIO_OUT 2 + +struct u300_gpio_configuration_data { + unsigned char pin_usage; + unsigned char default_output_value; + unsigned char pull_up; +}; + +/* Initial configuration */ +const struct u300_gpio_configuration_data +u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = { +#ifdef CONFIG_MACH_U300_BS335 + /* Port 0, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 1, pins 0-7 */ + { + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 2, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + }, + /* Port 3, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 4, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 5, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 6, pind 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + } +#endif + +#ifdef CONFIG_MACH_U300_BS365 + /* Port 0, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 1, pins 0-7 */ + { + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_HIGH, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP} + }, + /* Port 2, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, DISABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + }, + /* Port 3, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + }, + /* Port 4, pins 0-7 */ + { + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_IN, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + /* These 4 pins doesn't exist on DB3210 */ + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP}, + {GPIO_OUT, DEFAULT_OUTPUT_LOW, ENABLE_PULL_UP} + } +#endif +}; +#endif + + +/* No users == we can power down GPIO */ +static int gpio_users; + +struct gpio_struct { + int (*callback)(void *); + void *data; + int users; +}; + +static struct gpio_struct gpio_pin[U300_GPIO_MAX]; + +/* + * Let drivers register callback in order to get notified when there is + * an interrupt on the gpio pin + */ +int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data) +{ + if (gpio_pin[gpio].callback) + dev_warn(gpiodev, "%s: WARNING: callback already " + "registered for gpio pin#%d\n", __func__, gpio); + gpio_pin[gpio].callback = func; + gpio_pin[gpio].data = data; + + return 0; +} +EXPORT_SYMBOL(gpio_register_callback); + +int gpio_unregister_callback(unsigned gpio) +{ + if (!gpio_pin[gpio].callback) + dev_warn(gpiodev, "%s: WARNING: callback already " + "unregistered for gpio pin#%d\n", __func__, gpio); + gpio_pin[gpio].callback = NULL; + gpio_pin[gpio].data = NULL; + + return 0; +} +EXPORT_SYMBOL(gpio_unregister_callback); + +/* Non-zero means valid */ +int gpio_is_valid(int number) +{ + if (number >= 0 && + number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT)) + return 1; + return 0; +} +EXPORT_SYMBOL(gpio_is_valid); + +int gpio_request(unsigned gpio, const char *label) +{ + if (gpio_pin[gpio].users) + return -EINVAL; + else + gpio_pin[gpio].users++; + + gpio_users++; + + return 0; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned gpio) +{ + gpio_users--; + gpio_pin[gpio].users--; + if (unlikely(gpio_pin[gpio].users < 0)) { + dev_warn(gpiodev, "warning: gpio#%d release mismatch\n", + gpio); + gpio_pin[gpio].users = 0; + } + + return; +} +EXPORT_SYMBOL(gpio_free); + +/* This returns zero or nonzero */ +int gpio_get_value(unsigned gpio) +{ + return readl(virtbase + U300_GPIO_PXPDIR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07)); +} +EXPORT_SYMBOL(gpio_get_value); + +/* + * We hope that the compiler will optimize away the unused branch + * in case "value" is a constant + */ +void gpio_set_value(unsigned gpio, int value) +{ + u32 val; + unsigned long flags; + + local_irq_save(flags); + if (value) { + /* set */ + val = readl(virtbase + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) + & (1 << (gpio & 0x07)); + writel(val | (1 << (gpio & 0x07)), virtbase + + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } else { + /* clear */ + val = readl(virtbase + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) + & (1 << (gpio & 0x07)); + writel(val & ~(1 << (gpio & 0x07)), virtbase + + U300_GPIO_PXPDOR + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_set_value); + +int gpio_direction_input(unsigned gpio) +{ + unsigned long flags; + u32 val; + + if (gpio > U300_GPIO_MAX) + return -EINVAL; + + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + /* Mask out this pin*/ + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); + /* This is not needed since it sets the bits to zero.*/ + /* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */ + writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_input); + +int gpio_direction_output(unsigned gpio, int value) +{ + unsigned long flags; + u32 val; + + if (gpio > U300_GPIO_MAX) + return -EINVAL; + + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + /* Mask out this pin */ + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1)); + /* + * FIXME: configure for push/pull, open drain or open source per pin + * in setup. The current driver will only support push/pull. + */ + val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL + << ((gpio & 0x07) << 1)); + writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + gpio_set_value(gpio, value); + local_irq_restore(flags); + return 0; +} +EXPORT_SYMBOL(gpio_direction_output); + +/* + * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0). + */ +void enable_irq_on_gpio_pin(unsigned gpio, int edge) +{ + u32 val; + unsigned long flags; + local_irq_save(flags); + + val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + val |= (1 << (gpio & 0x07)); + writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + if (edge) + val |= (1 << (gpio & 0x07)); + else + val &= ~(1 << (gpio & 0x07)); + writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); +} +EXPORT_SYMBOL(enable_irq_on_gpio_pin); + +void disable_irq_on_gpio_pin(unsigned gpio) +{ + u32 val; + unsigned long flags; + + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + val &= ~(1 << (gpio & 0x07)); + writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); +} +EXPORT_SYMBOL(disable_irq_on_gpio_pin); + +/* Enable (value == 0) or disable (value == 1) internal pullup */ +void gpio_pullup(unsigned gpio, int value) +{ + u32 val; + unsigned long flags; + + local_irq_save(flags); + if (value) { + val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } else { + val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) * + U300_GPIO_PORTX_SPACING); + writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER + + PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING); + } + local_irq_restore(flags); +} +EXPORT_SYMBOL(gpio_pullup); + +static irqreturn_t gpio_irq_handler(int irq, void *dev_id) +{ + struct u300_gpio_port *port = dev_id; + u32 val; + int pin; + + /* Read event register */ + val = readl(virtbase + U300_GPIO_PXIEV + port->number * + U300_GPIO_PORTX_SPACING); + /* Mask with enable register */ + val &= readl(virtbase + U300_GPIO_PXIEV + port->number * + U300_GPIO_PORTX_SPACING); + /* Mask relevant bits */ + val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK; + /* ACK IRQ (clear event) */ + writel(val, virtbase + U300_GPIO_PXIEV + port->number * + U300_GPIO_PORTX_SPACING); + /* Print message */ + while (val != 0) { + unsigned gpio; + + pin = __ffs(val); + /* mask off this pin */ + val &= ~(1 << pin); + gpio = (port->number << 3) + pin; + + if (gpio_pin[gpio].callback) + (void)gpio_pin[gpio].callback(gpio_pin[gpio].data); + else + dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n", + gpio); + } + return IRQ_HANDLED; +} + +static void gpio_set_initial_values(void) +{ +#ifdef U300_COH901571_3 + int i, j; + unsigned long flags; + u32 val; + + /* Write default values to all pins */ + for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { + val = 0; + for (j = 0; j < 8; j++) + val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j; + local_irq_save(flags); + writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + } + + /* + * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED' + * to output and 'GPIO_IN' to input for each port. And initialize + * default value on outputs. + */ + for (i = 0; i < U300_GPIO_NUM_PORTS; i++) { + for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) { + local_irq_save(flags); + val = readl(virtbase + U300_GPIO_PXPCR + + i * U300_GPIO_PORTX_SPACING); + /* Mask out this pin */ + val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1)); + + if (u300_gpio_config[i][j].pin_usage != GPIO_IN) + val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1)); + writel(val, virtbase + U300_GPIO_PXPCR + + i * U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + } + } + + /* Enable or disable the internal pull-ups in the GPIO ASIC block */ + for (i = 0; i < U300_GPIO_MAX; i++) { + val = 0; + for (j = 0; j < 8; j++) + val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j); + local_irq_save(flags); + writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING); + local_irq_restore(flags); + } +#endif +} + +static int __init gpio_probe(struct platform_device *pdev) +{ + u32 val; + int err = 0; + int i; + int num_irqs; + + gpiodev = &pdev->dev; + memset(gpio_pin, 0, sizeof(gpio_pin)); + + /* Get GPIO clock */ + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + dev_err(gpiodev, "could not get GPIO clock\n"); + goto err_no_clk; + } + err = clk_enable(clk); + if (err) { + dev_err(gpiodev, "could not enable GPIO clock\n"); + goto err_no_clk_enable; + } + + memres = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!memres) + goto err_no_resource; + + if (request_mem_region(memres->start, memres->end - memres->start, "GPIO Controller") + == NULL) { + err = -ENODEV; + goto err_no_ioregion; + } + + virtbase = ioremap(memres->start, resource_size(memres)); + if (!virtbase) { + err = -ENOMEM; + goto err_no_ioremap; + } + dev_info(gpiodev, "remapped 0x%08x to %p\n", + memres->start, virtbase); + +#ifdef U300_COH901335 + dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n"); + /* Turn on the GPIO block */ + writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR); +#endif + +#ifdef U300_COH901571_3 + dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n"); + val = readl(virtbase + U300_GPIO_CR); + dev_info(gpiodev, "COH901571/3 block version: %d, " \ + "number of cores: %d\n", + ((val & 0x0000FE00) >> 9), + ((val & 0x000001FC) >> 2)); + writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR); +#endif + + gpio_set_initial_values(); + + for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) { + + gpio_ports[num_irqs].irq = + platform_get_irq_byname(pdev, + gpio_ports[num_irqs].name); + + err = request_irq(gpio_ports[num_irqs].irq, + gpio_irq_handler, IRQF_DISABLED, + gpio_ports[num_irqs].name, + &gpio_ports[num_irqs]); + if (err) { + dev_err(gpiodev, "cannot allocate IRQ for %s!\n", + gpio_ports[num_irqs].name); + goto err_no_irq; + } + /* Turns off PortX_irq_force */ + writel(0x0, virtbase + U300_GPIO_PXIFR + + num_irqs * U300_GPIO_PORTX_SPACING); + } + + return 0; + + err_no_irq: + for (i = 0; i < num_irqs; i++) + free_irq(gpio_ports[i].irq, &gpio_ports[i]); + iounmap(virtbase); + err_no_ioremap: + release_mem_region(memres->start, memres->end - memres->start); + err_no_ioregion: + err_no_resource: + clk_disable(clk); + err_no_clk_enable: + clk_put(clk); + err_no_clk: + dev_info(gpiodev, "module ERROR:%d\n", err); + return err; +} + +static int __exit gpio_remove(struct platform_device *pdev) +{ + int i; + + /* Turn off the GPIO block */ + writel(0x00000000U, virtbase + U300_GPIO_CR); + for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++) + free_irq(gpio_ports[i].irq, &gpio_ports[i]); + iounmap(virtbase); + release_mem_region(memres->start, memres->end - memres->start); + clk_disable(clk); + clk_put(clk); + return 0; +} + +static struct platform_driver gpio_driver = { + .driver = { + .name = "u300-gpio", + }, + .remove = __exit_p(gpio_remove), +}; + + +static int __init u300_gpio_init(void) +{ + return platform_driver_probe(&gpio_driver, gpio_probe); +} + +static void __exit u300_gpio_exit(void) +{ + platform_driver_unregister(&gpio_driver); +} + +arch_initcall(u300_gpio_init); +module_exit(u300_gpio_exit); + +MODULE_AUTHOR("Linus Walleij "); + +#ifdef U300_COH901571_3 +MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver"); +#endif + +#ifdef U300_COH901335 +MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver"); +#endif + +MODULE_LICENSE("GPL"); -- cgit v1.2.3 From 37d72457644a1ded37d57dd9ae664e4e228a034d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 26 May 2011 17:30:03 -0600 Subject: gpio: move Nomadik GPIO driver to drivers/gpio This moves the Nomadik GPIO driver out of arch/arm/plat-nomadik and into the desired location indicated by the subsystem maintainer. Signed-off-by: Linus Walleij [grant.likely: squashed with kconfig fixup] Signed-off-by: Grant Likely --- arch/arm/mach-nomadik/Kconfig | 1 - arch/arm/mach-ux500/Kconfig | 1 - arch/arm/plat-nomadik/Kconfig | 5 - arch/arm/plat-nomadik/Makefile | 1 - arch/arm/plat-nomadik/gpio.c | 1020 ---------------------------------------- drivers/gpio/Makefile | 1 + drivers/gpio/gpio-nomadik.c | 1020 ++++++++++++++++++++++++++++++++++++++++ 7 files changed, 1021 insertions(+), 1028 deletions(-) delete mode 100644 arch/arm/plat-nomadik/gpio.c create mode 100644 drivers/gpio/gpio-nomadik.c diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 71f3ea623974..3c5e0f522e9c 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -6,7 +6,6 @@ config MACH_NOMADIK_8815NHK bool "ST 8815 Nomadik Hardware Kit (evaluation board)" select NOMADIK_8815 select HAS_MTU - select NOMADIK_GPIO endmenu diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 54429d015954..f8b9392ee347 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -5,7 +5,6 @@ config UX500_SOC_COMMON default y select ARM_GIC select HAS_MTU - select NOMADIK_GPIO select ARM_ERRATA_753970 menu "Ux500 SoC" diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig index 18296ee68802..ce659015535e 100644 --- a/arch/arm/plat-nomadik/Kconfig +++ b/arch/arm/plat-nomadik/Kconfig @@ -21,9 +21,4 @@ config HAS_MTU to multiple interrupt generating programmable 32-bit free running decrementing counters. -config NOMADIK_GPIO - bool - help - Support for the Nomadik GPIO controller. - endif diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile index c33547361bd7..37c7cdd0f8f0 100644 --- a/arch/arm/plat-nomadik/Makefile +++ b/arch/arm/plat-nomadik/Makefile @@ -3,4 +3,3 @@ # Licensed under GPLv2 obj-$(CONFIG_HAS_MTU) += timer.o -obj-$(CONFIG_NOMADIK_GPIO) += gpio.o diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c deleted file mode 100644 index 307b8131aa8c..000000000000 --- a/arch/arm/plat-nomadik/gpio.c +++ /dev/null @@ -1,1020 +0,0 @@ -/* - * Generic GPIO driver for logic cells found in the Nomadik SoC - * - * Copyright (C) 2008,2009 STMicroelectronics - * Copyright (C) 2009 Alessandro Rubini - * Rewritten based on work by Prafulla WADASKAR - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -/* - * The GPIO module in the Nomadik family of Systems-on-Chip is an - * AMBA device, managing 32 pins and alternate functions. The logic block - * is currently used in the Nomadik and ux500. - * - * Symbols in this file are called "nmk_gpio" for "nomadik gpio" - */ - -#define NMK_GPIO_PER_CHIP 32 - -struct nmk_gpio_chip { - struct gpio_chip chip; - void __iomem *addr; - struct clk *clk; - unsigned int bank; - unsigned int parent_irq; - int secondary_parent_irq; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - spinlock_t lock; - /* Keep track of configured edges */ - u32 edge_rising; - u32 edge_falling; - u32 real_wake; - u32 rwimsc; - u32 fwimsc; - u32 slpm; - u32 enabled; -}; - -static struct nmk_gpio_chip * -nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)]; - -static DEFINE_SPINLOCK(nmk_gpio_slpm_lock); - -#define NUM_BANKS ARRAY_SIZE(nmk_gpio_chips) - -static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int gpio_mode) -{ - u32 bit = 1 << offset; - u32 afunc, bfunc; - - afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; - bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; - if (gpio_mode & NMK_GPIO_ALT_A) - afunc |= bit; - if (gpio_mode & NMK_GPIO_ALT_B) - bfunc |= bit; - writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); - writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); -} - -static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip, - unsigned offset, enum nmk_gpio_slpm mode) -{ - u32 bit = 1 << offset; - u32 slpm; - - slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC); - if (mode == NMK_GPIO_SLPM_NOCHANGE) - slpm |= bit; - else - slpm &= ~bit; - writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC); -} - -static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip, - unsigned offset, enum nmk_gpio_pull pull) -{ - u32 bit = 1 << offset; - u32 pdis; - - pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS); - if (pull == NMK_GPIO_PULL_NONE) - pdis |= bit; - else - pdis &= ~bit; - writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS); - - if (pull == NMK_GPIO_PULL_UP) - writel(bit, nmk_chip->addr + NMK_GPIO_DATS); - else if (pull == NMK_GPIO_PULL_DOWN) - writel(bit, nmk_chip->addr + NMK_GPIO_DATC); -} - -static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, - unsigned offset) -{ - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); -} - -static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int val) -{ - if (val) - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS); - else - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC); -} - -static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int val) -{ - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); - __nmk_gpio_set_output(nmk_chip, offset, val); -} - -static void __nmk_gpio_set_mode_safe(struct nmk_gpio_chip *nmk_chip, - unsigned offset, int gpio_mode, - bool glitch) -{ - u32 rwimsc = readl(nmk_chip->addr + NMK_GPIO_RWIMSC); - u32 fwimsc = readl(nmk_chip->addr + NMK_GPIO_FWIMSC); - - if (glitch && nmk_chip->set_ioforce) { - u32 bit = BIT(offset); - - /* Prevent spurious wakeups */ - writel(rwimsc & ~bit, nmk_chip->addr + NMK_GPIO_RWIMSC); - writel(fwimsc & ~bit, nmk_chip->addr + NMK_GPIO_FWIMSC); - - nmk_chip->set_ioforce(true); - } - - __nmk_gpio_set_mode(nmk_chip, offset, gpio_mode); - - if (glitch && nmk_chip->set_ioforce) { - nmk_chip->set_ioforce(false); - - writel(rwimsc, nmk_chip->addr + NMK_GPIO_RWIMSC); - writel(fwimsc, nmk_chip->addr + NMK_GPIO_FWIMSC); - } -} - -static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, - pin_cfg_t cfg, bool sleep, unsigned int *slpmregs) -{ - static const char *afnames[] = { - [NMK_GPIO_ALT_GPIO] = "GPIO", - [NMK_GPIO_ALT_A] = "A", - [NMK_GPIO_ALT_B] = "B", - [NMK_GPIO_ALT_C] = "C" - }; - static const char *pullnames[] = { - [NMK_GPIO_PULL_NONE] = "none", - [NMK_GPIO_PULL_UP] = "up", - [NMK_GPIO_PULL_DOWN] = "down", - [3] /* illegal */ = "??" - }; - static const char *slpmnames[] = { - [NMK_GPIO_SLPM_INPUT] = "input/wakeup", - [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup", - }; - - int pin = PIN_NUM(cfg); - int pull = PIN_PULL(cfg); - int af = PIN_ALT(cfg); - int slpm = PIN_SLPM(cfg); - int output = PIN_DIR(cfg); - int val = PIN_VAL(cfg); - bool glitch = af == NMK_GPIO_ALT_C; - - dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n", - pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm], - output ? "output " : "input", - output ? (val ? "high" : "low") : ""); - - if (sleep) { - int slpm_pull = PIN_SLPM_PULL(cfg); - int slpm_output = PIN_SLPM_DIR(cfg); - int slpm_val = PIN_SLPM_VAL(cfg); - - af = NMK_GPIO_ALT_GPIO; - - /* - * The SLPM_* values are normal values + 1 to allow zero to - * mean "same as normal". - */ - if (slpm_pull) - pull = slpm_pull - 1; - if (slpm_output) - output = slpm_output - 1; - if (slpm_val) - val = slpm_val - 1; - - dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n", - pin, - slpm_pull ? pullnames[pull] : "same", - slpm_output ? (output ? "output" : "input") : "same", - slpm_val ? (val ? "high" : "low") : "same"); - } - - if (output) - __nmk_gpio_make_output(nmk_chip, offset, val); - else { - __nmk_gpio_make_input(nmk_chip, offset); - __nmk_gpio_set_pull(nmk_chip, offset, pull); - } - - /* - * If we've backed up the SLPM registers (glitch workaround), modify - * the backups since they will be restored. - */ - if (slpmregs) { - if (slpm == NMK_GPIO_SLPM_NOCHANGE) - slpmregs[nmk_chip->bank] |= BIT(offset); - else - slpmregs[nmk_chip->bank] &= ~BIT(offset); - } else - __nmk_gpio_set_slpm(nmk_chip, offset, slpm); - - __nmk_gpio_set_mode_safe(nmk_chip, offset, af, glitch); -} - -/* - * Safe sequence used to switch IOs between GPIO and Alternate-C mode: - * - Save SLPM registers - * - Set SLPM=0 for the IOs you want to switch and others to 1 - * - Configure the GPIO registers for the IOs that are being switched - * - Set IOFORCE=1 - * - Modify the AFLSA/B registers for the IOs that are being switched - * - Set IOFORCE=0 - * - Restore SLPM registers - * - Any spurious wake up event during switch sequence to be ignored and - * cleared - */ -static void nmk_gpio_glitch_slpm_init(unsigned int *slpm) -{ - int i; - - for (i = 0; i < NUM_BANKS; i++) { - struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; - unsigned int temp = slpm[i]; - - if (!chip) - break; - - slpm[i] = readl(chip->addr + NMK_GPIO_SLPC); - writel(temp, chip->addr + NMK_GPIO_SLPC); - } -} - -static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm) -{ - int i; - - for (i = 0; i < NUM_BANKS; i++) { - struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; - - if (!chip) - break; - - writel(slpm[i], chip->addr + NMK_GPIO_SLPC); - } -} - -static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep) -{ - static unsigned int slpm[NUM_BANKS]; - unsigned long flags; - bool glitch = false; - int ret = 0; - int i; - - for (i = 0; i < num; i++) { - if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) { - glitch = true; - break; - } - } - - spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); - - if (glitch) { - memset(slpm, 0xff, sizeof(slpm)); - - for (i = 0; i < num; i++) { - int pin = PIN_NUM(cfgs[i]); - int offset = pin % NMK_GPIO_PER_CHIP; - - if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) - slpm[pin / NMK_GPIO_PER_CHIP] &= ~BIT(offset); - } - - nmk_gpio_glitch_slpm_init(slpm); - } - - for (i = 0; i < num; i++) { - struct nmk_gpio_chip *nmk_chip; - int pin = PIN_NUM(cfgs[i]); - - nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(pin)); - if (!nmk_chip) { - ret = -EINVAL; - break; - } - - spin_lock(&nmk_chip->lock); - __nmk_config_pin(nmk_chip, pin - nmk_chip->chip.base, - cfgs[i], sleep, glitch ? slpm : NULL); - spin_unlock(&nmk_chip->lock); - } - - if (glitch) - nmk_gpio_glitch_slpm_restore(slpm); - - spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); - - return ret; -} - -/** - * nmk_config_pin - configure a pin's mux attributes - * @cfg: pin confguration - * - * Configures a pin's mode (alternate function or GPIO), its pull up status, - * and its sleep mode based on the specified configuration. The @cfg is - * usually one of the SoC specific macros defined in mach/-pins.h. These - * are constructed using, and can be further enhanced with, the macros in - * plat/pincfg.h. - * - * If a pin's mode is set to GPIO, it is configured as an input to avoid - * side-effects. The gpio can be manipulated later using standard GPIO API - * calls. - */ -int nmk_config_pin(pin_cfg_t cfg, bool sleep) -{ - return __nmk_config_pins(&cfg, 1, sleep); -} -EXPORT_SYMBOL(nmk_config_pin); - -/** - * nmk_config_pins - configure several pins at once - * @cfgs: array of pin configurations - * @num: number of elments in the array - * - * Configures several pins using nmk_config_pin(). Refer to that function for - * further information. - */ -int nmk_config_pins(pin_cfg_t *cfgs, int num) -{ - return __nmk_config_pins(cfgs, num, false); -} -EXPORT_SYMBOL(nmk_config_pins); - -int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num) -{ - return __nmk_config_pins(cfgs, num, true); -} -EXPORT_SYMBOL(nmk_config_pins_sleep); - -/** - * nmk_gpio_set_slpm() - configure the sleep mode of a pin - * @gpio: pin number - * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE, - * - * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is - * changed to an input (with pullup/down enabled) in sleep and deep sleep. If - * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was - * configured even when in sleep and deep sleep. - * - * On DB8500v2 onwards, this setting loses the previous meaning and instead - * indicates if wakeup detection is enabled on the pin. Note that - * enable_irq_wake() will automatically enable wakeup detection. - */ -int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - - nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); - spin_lock(&nmk_chip->lock); - - __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode); - - spin_unlock(&nmk_chip->lock); - spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); - - return 0; -} - -/** - * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio - * @gpio: pin number - * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE - * - * Enables/disables pull up/down on a specified pin. This only takes effect if - * the pin is configured as an input (either explicitly or by the alternate - * function). - * - * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is - * configured as an input. Otherwise, due to the way the controller registers - * work, this function will change the value output on the pin. - */ -int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - - nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} - -/* Mode functions */ -/** - * nmk_gpio_set_mode() - set the mux mode of a gpio pin - * @gpio: pin number - * @gpio_mode: one of NMK_GPIO_ALT_GPIO, NMK_GPIO_ALT_A, - * NMK_GPIO_ALT_B, and NMK_GPIO_ALT_C - * - * Sets the mode of the specified pin to one of the alternate functions or - * plain GPIO. - */ -int nmk_gpio_set_mode(int gpio, int gpio_mode) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - - nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode); - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} -EXPORT_SYMBOL(nmk_gpio_set_mode); - -int nmk_gpio_get_mode(int gpio) -{ - struct nmk_gpio_chip *nmk_chip; - u32 afunc, bfunc, bit; - - nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); - if (!nmk_chip) - return -EINVAL; - - bit = 1 << (gpio - nmk_chip->chip.base); - - afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit; - bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit; - - return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0); -} -EXPORT_SYMBOL(nmk_gpio_get_mode); - - -/* IRQ functions */ -static inline int nmk_gpio_get_bitmask(int gpio) -{ - return 1 << (gpio % 32); -} - -static void nmk_gpio_irq_ack(struct irq_data *d) -{ - int gpio; - struct nmk_gpio_chip *nmk_chip; - - gpio = NOMADIK_IRQ_TO_GPIO(d->irq); - nmk_chip = irq_data_get_irq_chip_data(d); - if (!nmk_chip) - return; - writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC); -} - -enum nmk_gpio_irq_type { - NORMAL, - WAKE, -}; - -static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, - int gpio, enum nmk_gpio_irq_type which, - bool enable) -{ - u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC; - u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC; - u32 bitmask = nmk_gpio_get_bitmask(gpio); - u32 reg; - - /* we must individually set/clear the two edges */ - if (nmk_chip->edge_rising & bitmask) { - reg = readl(nmk_chip->addr + rimsc); - if (enable) - reg |= bitmask; - else - reg &= ~bitmask; - writel(reg, nmk_chip->addr + rimsc); - } - if (nmk_chip->edge_falling & bitmask) { - reg = readl(nmk_chip->addr + fimsc); - if (enable) - reg |= bitmask; - else - reg &= ~bitmask; - writel(reg, nmk_chip->addr + fimsc); - } -} - -static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip, - int gpio, bool on) -{ - __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); -} - -static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable) -{ - int gpio; - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - u32 bitmask; - - gpio = NOMADIK_IRQ_TO_GPIO(d->irq); - nmk_chip = irq_data_get_irq_chip_data(d); - bitmask = nmk_gpio_get_bitmask(gpio); - if (!nmk_chip) - return -EINVAL; - - if (enable) - nmk_chip->enabled |= bitmask; - else - nmk_chip->enabled &= ~bitmask; - - spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); - spin_lock(&nmk_chip->lock); - - __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, enable); - - if (!(nmk_chip->real_wake & bitmask)) - __nmk_gpio_set_wake(nmk_chip, gpio, enable); - - spin_unlock(&nmk_chip->lock); - spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); - - return 0; -} - -static void nmk_gpio_irq_mask(struct irq_data *d) -{ - nmk_gpio_irq_maskunmask(d, false); -} - -static void nmk_gpio_irq_unmask(struct irq_data *d) -{ - nmk_gpio_irq_maskunmask(d, true); -} - -static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on) -{ - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - u32 bitmask; - int gpio; - - gpio = NOMADIK_IRQ_TO_GPIO(d->irq); - nmk_chip = irq_data_get_irq_chip_data(d); - if (!nmk_chip) - return -EINVAL; - bitmask = nmk_gpio_get_bitmask(gpio); - - spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); - spin_lock(&nmk_chip->lock); - - if (!(nmk_chip->enabled & bitmask)) - __nmk_gpio_set_wake(nmk_chip, gpio, on); - - if (on) - nmk_chip->real_wake |= bitmask; - else - nmk_chip->real_wake &= ~bitmask; - - spin_unlock(&nmk_chip->lock); - spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); - - return 0; -} - -static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type) -{ - bool enabled, wake = irqd_is_wakeup_set(d); - int gpio; - struct nmk_gpio_chip *nmk_chip; - unsigned long flags; - u32 bitmask; - - gpio = NOMADIK_IRQ_TO_GPIO(d->irq); - nmk_chip = irq_data_get_irq_chip_data(d); - bitmask = nmk_gpio_get_bitmask(gpio); - if (!nmk_chip) - return -EINVAL; - - if (type & IRQ_TYPE_LEVEL_HIGH) - return -EINVAL; - if (type & IRQ_TYPE_LEVEL_LOW) - return -EINVAL; - - enabled = nmk_chip->enabled & bitmask; - - spin_lock_irqsave(&nmk_chip->lock, flags); - - if (enabled) - __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false); - - if (enabled || wake) - __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false); - - nmk_chip->edge_rising &= ~bitmask; - if (type & IRQ_TYPE_EDGE_RISING) - nmk_chip->edge_rising |= bitmask; - - nmk_chip->edge_falling &= ~bitmask; - if (type & IRQ_TYPE_EDGE_FALLING) - nmk_chip->edge_falling |= bitmask; - - if (enabled) - __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true); - - if (enabled || wake) - __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true); - - spin_unlock_irqrestore(&nmk_chip->lock, flags); - - return 0; -} - -static struct irq_chip nmk_gpio_irq_chip = { - .name = "Nomadik-GPIO", - .irq_ack = nmk_gpio_irq_ack, - .irq_mask = nmk_gpio_irq_mask, - .irq_unmask = nmk_gpio_irq_unmask, - .irq_set_type = nmk_gpio_irq_set_type, - .irq_set_wake = nmk_gpio_irq_set_wake, -}; - -static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc, - u32 status) -{ - struct nmk_gpio_chip *nmk_chip; - struct irq_chip *host_chip = irq_get_chip(irq); - unsigned int first_irq; - - chained_irq_enter(host_chip, desc); - - nmk_chip = irq_get_handler_data(irq); - first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); - while (status) { - int bit = __ffs(status); - - generic_handle_irq(first_irq + bit); - status &= ~BIT(bit); - } - - chained_irq_exit(host_chip, desc); -} - -static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq); - u32 status = readl(nmk_chip->addr + NMK_GPIO_IS); - - __nmk_gpio_irq_handler(irq, desc, status); -} - -static void nmk_gpio_secondary_irq_handler(unsigned int irq, - struct irq_desc *desc) -{ - struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq); - u32 status = nmk_chip->get_secondary_status(nmk_chip->bank); - - __nmk_gpio_irq_handler(irq, desc, status); -} - -static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) -{ - unsigned int first_irq; - int i; - - first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); - for (i = first_irq; i < first_irq + nmk_chip->chip.ngpio; i++) { - irq_set_chip_and_handler(i, &nmk_gpio_irq_chip, - handle_edge_irq); - set_irq_flags(i, IRQF_VALID); - irq_set_chip_data(i, nmk_chip); - irq_set_irq_type(i, IRQ_TYPE_EDGE_FALLING); - } - - irq_set_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); - irq_set_handler_data(nmk_chip->parent_irq, nmk_chip); - - if (nmk_chip->secondary_parent_irq >= 0) { - irq_set_chained_handler(nmk_chip->secondary_parent_irq, - nmk_gpio_secondary_irq_handler); - irq_set_handler_data(nmk_chip->secondary_parent_irq, nmk_chip); - } - - return 0; -} - -/* I/O Functions */ -static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); - return 0; -} - -static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - u32 bit = 1 << offset; - - return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0; -} - -static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - __nmk_gpio_set_output(nmk_chip, offset, val); -} - -static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - __nmk_gpio_make_output(nmk_chip, offset, val); - - return 0; -} - -static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - - return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset; -} - -#ifdef CONFIG_DEBUG_FS - -#include - -static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) -{ - int mode; - unsigned i; - unsigned gpio = chip->base; - int is_out; - struct nmk_gpio_chip *nmk_chip = - container_of(chip, struct nmk_gpio_chip, chip); - const char *modes[] = { - [NMK_GPIO_ALT_GPIO] = "gpio", - [NMK_GPIO_ALT_A] = "altA", - [NMK_GPIO_ALT_B] = "altB", - [NMK_GPIO_ALT_C] = "altC", - }; - - for (i = 0; i < chip->ngpio; i++, gpio++) { - const char *label = gpiochip_is_requested(chip, i); - bool pull; - u32 bit = 1 << i; - - if (!label) - continue; - - is_out = readl(nmk_chip->addr + NMK_GPIO_DIR) & bit; - pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit); - mode = nmk_gpio_get_mode(gpio); - seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s", - gpio, label, - is_out ? "out" : "in ", - chip->get - ? (chip->get(chip, i) ? "hi" : "lo") - : "? ", - (mode < 0) ? "unknown" : modes[mode], - pull ? "pull" : "none"); - seq_printf(s, "\n"); - } -} - -#else -#define nmk_gpio_dbg_show NULL -#endif - -/* This structure is replicated for each GPIO block allocated at probe time */ -static struct gpio_chip nmk_gpio_template = { - .direction_input = nmk_gpio_make_input, - .get = nmk_gpio_get_input, - .direction_output = nmk_gpio_make_output, - .set = nmk_gpio_set_output, - .to_irq = nmk_gpio_to_irq, - .dbg_show = nmk_gpio_dbg_show, - .can_sleep = 0, -}; - -/* - * Called from the suspend/resume path to only keep the real wakeup interrupts - * (those that have had set_irq_wake() called on them) as wakeup interrupts, - * and not the rest of the interrupts which we needed to have as wakeups for - * cpuidle. - * - * PM ops are not used since this needs to be done at the end, after all the - * other drivers are done with their suspend callbacks. - */ -void nmk_gpio_wakeups_suspend(void) -{ - int i; - - for (i = 0; i < NUM_BANKS; i++) { - struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; - - if (!chip) - break; - - chip->rwimsc = readl(chip->addr + NMK_GPIO_RWIMSC); - chip->fwimsc = readl(chip->addr + NMK_GPIO_FWIMSC); - - writel(chip->rwimsc & chip->real_wake, - chip->addr + NMK_GPIO_RWIMSC); - writel(chip->fwimsc & chip->real_wake, - chip->addr + NMK_GPIO_FWIMSC); - - if (cpu_is_u8500v2()) { - chip->slpm = readl(chip->addr + NMK_GPIO_SLPC); - - /* 0 -> wakeup enable */ - writel(~chip->real_wake, chip->addr + NMK_GPIO_SLPC); - } - } -} - -void nmk_gpio_wakeups_resume(void) -{ - int i; - - for (i = 0; i < NUM_BANKS; i++) { - struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; - - if (!chip) - break; - - writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC); - writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC); - - if (cpu_is_u8500v2()) - writel(chip->slpm, chip->addr + NMK_GPIO_SLPC); - } -} - -static int __devinit nmk_gpio_probe(struct platform_device *dev) -{ - struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; - struct nmk_gpio_chip *nmk_chip; - struct gpio_chip *chip; - struct resource *res; - struct clk *clk; - int secondary_irq; - int irq; - int ret; - - if (!pdata) - return -ENODEV; - - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENOENT; - goto out; - } - - irq = platform_get_irq(dev, 0); - if (irq < 0) { - ret = irq; - goto out; - } - - secondary_irq = platform_get_irq(dev, 1); - if (secondary_irq >= 0 && !pdata->get_secondary_status) { - ret = -EINVAL; - goto out; - } - - if (request_mem_region(res->start, resource_size(res), - dev_name(&dev->dev)) == NULL) { - ret = -EBUSY; - goto out; - } - - clk = clk_get(&dev->dev, NULL); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - goto out_release; - } - - clk_enable(clk); - - nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL); - if (!nmk_chip) { - ret = -ENOMEM; - goto out_clk; - } - /* - * The virt address in nmk_chip->addr is in the nomadik register space, - * so we can simply convert the resource address, without remapping - */ - nmk_chip->bank = dev->id; - nmk_chip->clk = clk; - nmk_chip->addr = io_p2v(res->start); - nmk_chip->chip = nmk_gpio_template; - nmk_chip->parent_irq = irq; - nmk_chip->secondary_parent_irq = secondary_irq; - nmk_chip->get_secondary_status = pdata->get_secondary_status; - nmk_chip->set_ioforce = pdata->set_ioforce; - spin_lock_init(&nmk_chip->lock); - - chip = &nmk_chip->chip; - chip->base = pdata->first_gpio; - chip->ngpio = pdata->num_gpio; - chip->label = pdata->name ?: dev_name(&dev->dev); - chip->dev = &dev->dev; - chip->owner = THIS_MODULE; - - ret = gpiochip_add(&nmk_chip->chip); - if (ret) - goto out_free; - - BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips)); - - nmk_gpio_chips[nmk_chip->bank] = nmk_chip; - platform_set_drvdata(dev, nmk_chip); - - nmk_gpio_init_irq(nmk_chip); - - dev_info(&dev->dev, "Bits %i-%i at address %p\n", - nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr); - return 0; - -out_free: - kfree(nmk_chip); -out_clk: - clk_disable(clk); - clk_put(clk); -out_release: - release_mem_region(res->start, resource_size(res)); -out: - dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret, - pdata->first_gpio, pdata->first_gpio+31); - return ret; -} - -static struct platform_driver nmk_gpio_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "gpio", - }, - .probe = nmk_gpio_probe, -}; - -static int __init nmk_gpio_init(void) -{ - return platform_driver_register(&nmk_gpio_driver); -} - -core_initcall(nmk_gpio_init); - -MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); -MODULE_DESCRIPTION("Nomadik GPIO Driver"); -MODULE_LICENSE("GPL"); - - diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 27a22086739b..7481e7da2adb 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_GPIO_WM8350) += wm8350-gpiolib.o obj-$(CONFIG_GPIO_WM8994) += wm8994-gpio.o obj-$(CONFIG_GPIO_SCH) += sch_gpio.o obj-$(CONFIG_MACH_U300) += gpio-u300.o +obj-$(CONFIG_PLAT_NOMADIK) += gpio-nomadik.o obj-$(CONFIG_GPIO_RDC321X) += rdc321x-gpio.o obj-$(CONFIG_GPIO_JANZ_TTL) += janz-ttl.o obj-$(CONFIG_GPIO_SX150X) += sx150x.o diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c new file mode 100644 index 000000000000..307b8131aa8c --- /dev/null +++ b/drivers/gpio/gpio-nomadik.c @@ -0,0 +1,1020 @@ +/* + * Generic GPIO driver for logic cells found in the Nomadik SoC + * + * Copyright (C) 2008,2009 STMicroelectronics + * Copyright (C) 2009 Alessandro Rubini + * Rewritten based on work by Prafulla WADASKAR + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +/* + * The GPIO module in the Nomadik family of Systems-on-Chip is an + * AMBA device, managing 32 pins and alternate functions. The logic block + * is currently used in the Nomadik and ux500. + * + * Symbols in this file are called "nmk_gpio" for "nomadik gpio" + */ + +#define NMK_GPIO_PER_CHIP 32 + +struct nmk_gpio_chip { + struct gpio_chip chip; + void __iomem *addr; + struct clk *clk; + unsigned int bank; + unsigned int parent_irq; + int secondary_parent_irq; + u32 (*get_secondary_status)(unsigned int bank); + void (*set_ioforce)(bool enable); + spinlock_t lock; + /* Keep track of configured edges */ + u32 edge_rising; + u32 edge_falling; + u32 real_wake; + u32 rwimsc; + u32 fwimsc; + u32 slpm; + u32 enabled; +}; + +static struct nmk_gpio_chip * +nmk_gpio_chips[DIV_ROUND_UP(ARCH_NR_GPIOS, NMK_GPIO_PER_CHIP)]; + +static DEFINE_SPINLOCK(nmk_gpio_slpm_lock); + +#define NUM_BANKS ARRAY_SIZE(nmk_gpio_chips) + +static void __nmk_gpio_set_mode(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int gpio_mode) +{ + u32 bit = 1 << offset; + u32 afunc, bfunc; + + afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & ~bit; + bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & ~bit; + if (gpio_mode & NMK_GPIO_ALT_A) + afunc |= bit; + if (gpio_mode & NMK_GPIO_ALT_B) + bfunc |= bit; + writel(afunc, nmk_chip->addr + NMK_GPIO_AFSLA); + writel(bfunc, nmk_chip->addr + NMK_GPIO_AFSLB); +} + +static void __nmk_gpio_set_slpm(struct nmk_gpio_chip *nmk_chip, + unsigned offset, enum nmk_gpio_slpm mode) +{ + u32 bit = 1 << offset; + u32 slpm; + + slpm = readl(nmk_chip->addr + NMK_GPIO_SLPC); + if (mode == NMK_GPIO_SLPM_NOCHANGE) + slpm |= bit; + else + slpm &= ~bit; + writel(slpm, nmk_chip->addr + NMK_GPIO_SLPC); +} + +static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip, + unsigned offset, enum nmk_gpio_pull pull) +{ + u32 bit = 1 << offset; + u32 pdis; + + pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS); + if (pull == NMK_GPIO_PULL_NONE) + pdis |= bit; + else + pdis &= ~bit; + writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS); + + if (pull == NMK_GPIO_PULL_UP) + writel(bit, nmk_chip->addr + NMK_GPIO_DATS); + else if (pull == NMK_GPIO_PULL_DOWN) + writel(bit, nmk_chip->addr + NMK_GPIO_DATC); +} + +static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, + unsigned offset) +{ + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); +} + +static void __nmk_gpio_set_output(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int val) +{ + if (val) + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATS); + else + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DATC); +} + +static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int val) +{ + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRS); + __nmk_gpio_set_output(nmk_chip, offset, val); +} + +static void __nmk_gpio_set_mode_safe(struct nmk_gpio_chip *nmk_chip, + unsigned offset, int gpio_mode, + bool glitch) +{ + u32 rwimsc = readl(nmk_chip->addr + NMK_GPIO_RWIMSC); + u32 fwimsc = readl(nmk_chip->addr + NMK_GPIO_FWIMSC); + + if (glitch && nmk_chip->set_ioforce) { + u32 bit = BIT(offset); + + /* Prevent spurious wakeups */ + writel(rwimsc & ~bit, nmk_chip->addr + NMK_GPIO_RWIMSC); + writel(fwimsc & ~bit, nmk_chip->addr + NMK_GPIO_FWIMSC); + + nmk_chip->set_ioforce(true); + } + + __nmk_gpio_set_mode(nmk_chip, offset, gpio_mode); + + if (glitch && nmk_chip->set_ioforce) { + nmk_chip->set_ioforce(false); + + writel(rwimsc, nmk_chip->addr + NMK_GPIO_RWIMSC); + writel(fwimsc, nmk_chip->addr + NMK_GPIO_FWIMSC); + } +} + +static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, + pin_cfg_t cfg, bool sleep, unsigned int *slpmregs) +{ + static const char *afnames[] = { + [NMK_GPIO_ALT_GPIO] = "GPIO", + [NMK_GPIO_ALT_A] = "A", + [NMK_GPIO_ALT_B] = "B", + [NMK_GPIO_ALT_C] = "C" + }; + static const char *pullnames[] = { + [NMK_GPIO_PULL_NONE] = "none", + [NMK_GPIO_PULL_UP] = "up", + [NMK_GPIO_PULL_DOWN] = "down", + [3] /* illegal */ = "??" + }; + static const char *slpmnames[] = { + [NMK_GPIO_SLPM_INPUT] = "input/wakeup", + [NMK_GPIO_SLPM_NOCHANGE] = "no-change/no-wakeup", + }; + + int pin = PIN_NUM(cfg); + int pull = PIN_PULL(cfg); + int af = PIN_ALT(cfg); + int slpm = PIN_SLPM(cfg); + int output = PIN_DIR(cfg); + int val = PIN_VAL(cfg); + bool glitch = af == NMK_GPIO_ALT_C; + + dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n", + pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm], + output ? "output " : "input", + output ? (val ? "high" : "low") : ""); + + if (sleep) { + int slpm_pull = PIN_SLPM_PULL(cfg); + int slpm_output = PIN_SLPM_DIR(cfg); + int slpm_val = PIN_SLPM_VAL(cfg); + + af = NMK_GPIO_ALT_GPIO; + + /* + * The SLPM_* values are normal values + 1 to allow zero to + * mean "same as normal". + */ + if (slpm_pull) + pull = slpm_pull - 1; + if (slpm_output) + output = slpm_output - 1; + if (slpm_val) + val = slpm_val - 1; + + dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n", + pin, + slpm_pull ? pullnames[pull] : "same", + slpm_output ? (output ? "output" : "input") : "same", + slpm_val ? (val ? "high" : "low") : "same"); + } + + if (output) + __nmk_gpio_make_output(nmk_chip, offset, val); + else { + __nmk_gpio_make_input(nmk_chip, offset); + __nmk_gpio_set_pull(nmk_chip, offset, pull); + } + + /* + * If we've backed up the SLPM registers (glitch workaround), modify + * the backups since they will be restored. + */ + if (slpmregs) { + if (slpm == NMK_GPIO_SLPM_NOCHANGE) + slpmregs[nmk_chip->bank] |= BIT(offset); + else + slpmregs[nmk_chip->bank] &= ~BIT(offset); + } else + __nmk_gpio_set_slpm(nmk_chip, offset, slpm); + + __nmk_gpio_set_mode_safe(nmk_chip, offset, af, glitch); +} + +/* + * Safe sequence used to switch IOs between GPIO and Alternate-C mode: + * - Save SLPM registers + * - Set SLPM=0 for the IOs you want to switch and others to 1 + * - Configure the GPIO registers for the IOs that are being switched + * - Set IOFORCE=1 + * - Modify the AFLSA/B registers for the IOs that are being switched + * - Set IOFORCE=0 + * - Restore SLPM registers + * - Any spurious wake up event during switch sequence to be ignored and + * cleared + */ +static void nmk_gpio_glitch_slpm_init(unsigned int *slpm) +{ + int i; + + for (i = 0; i < NUM_BANKS; i++) { + struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; + unsigned int temp = slpm[i]; + + if (!chip) + break; + + slpm[i] = readl(chip->addr + NMK_GPIO_SLPC); + writel(temp, chip->addr + NMK_GPIO_SLPC); + } +} + +static void nmk_gpio_glitch_slpm_restore(unsigned int *slpm) +{ + int i; + + for (i = 0; i < NUM_BANKS; i++) { + struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; + + if (!chip) + break; + + writel(slpm[i], chip->addr + NMK_GPIO_SLPC); + } +} + +static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep) +{ + static unsigned int slpm[NUM_BANKS]; + unsigned long flags; + bool glitch = false; + int ret = 0; + int i; + + for (i = 0; i < num; i++) { + if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) { + glitch = true; + break; + } + } + + spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); + + if (glitch) { + memset(slpm, 0xff, sizeof(slpm)); + + for (i = 0; i < num; i++) { + int pin = PIN_NUM(cfgs[i]); + int offset = pin % NMK_GPIO_PER_CHIP; + + if (PIN_ALT(cfgs[i]) == NMK_GPIO_ALT_C) + slpm[pin / NMK_GPIO_PER_CHIP] &= ~BIT(offset); + } + + nmk_gpio_glitch_slpm_init(slpm); + } + + for (i = 0; i < num; i++) { + struct nmk_gpio_chip *nmk_chip; + int pin = PIN_NUM(cfgs[i]); + + nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(pin)); + if (!nmk_chip) { + ret = -EINVAL; + break; + } + + spin_lock(&nmk_chip->lock); + __nmk_config_pin(nmk_chip, pin - nmk_chip->chip.base, + cfgs[i], sleep, glitch ? slpm : NULL); + spin_unlock(&nmk_chip->lock); + } + + if (glitch) + nmk_gpio_glitch_slpm_restore(slpm); + + spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); + + return ret; +} + +/** + * nmk_config_pin - configure a pin's mux attributes + * @cfg: pin confguration + * + * Configures a pin's mode (alternate function or GPIO), its pull up status, + * and its sleep mode based on the specified configuration. The @cfg is + * usually one of the SoC specific macros defined in mach/-pins.h. These + * are constructed using, and can be further enhanced with, the macros in + * plat/pincfg.h. + * + * If a pin's mode is set to GPIO, it is configured as an input to avoid + * side-effects. The gpio can be manipulated later using standard GPIO API + * calls. + */ +int nmk_config_pin(pin_cfg_t cfg, bool sleep) +{ + return __nmk_config_pins(&cfg, 1, sleep); +} +EXPORT_SYMBOL(nmk_config_pin); + +/** + * nmk_config_pins - configure several pins at once + * @cfgs: array of pin configurations + * @num: number of elments in the array + * + * Configures several pins using nmk_config_pin(). Refer to that function for + * further information. + */ +int nmk_config_pins(pin_cfg_t *cfgs, int num) +{ + return __nmk_config_pins(cfgs, num, false); +} +EXPORT_SYMBOL(nmk_config_pins); + +int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num) +{ + return __nmk_config_pins(cfgs, num, true); +} +EXPORT_SYMBOL(nmk_config_pins_sleep); + +/** + * nmk_gpio_set_slpm() - configure the sleep mode of a pin + * @gpio: pin number + * @mode: NMK_GPIO_SLPM_INPUT or NMK_GPIO_SLPM_NOCHANGE, + * + * Sets the sleep mode of a pin. If @mode is NMK_GPIO_SLPM_INPUT, the pin is + * changed to an input (with pullup/down enabled) in sleep and deep sleep. If + * @mode is NMK_GPIO_SLPM_NOCHANGE, the pin remains in the state it was + * configured even when in sleep and deep sleep. + * + * On DB8500v2 onwards, this setting loses the previous meaning and instead + * indicates if wakeup detection is enabled on the pin. Note that + * enable_irq_wake() will automatically enable wakeup detection. + */ +int nmk_gpio_set_slpm(int gpio, enum nmk_gpio_slpm mode) +{ + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + + nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); + spin_lock(&nmk_chip->lock); + + __nmk_gpio_set_slpm(nmk_chip, gpio - nmk_chip->chip.base, mode); + + spin_unlock(&nmk_chip->lock); + spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); + + return 0; +} + +/** + * nmk_gpio_set_pull() - enable/disable pull up/down on a gpio + * @gpio: pin number + * @pull: one of NMK_GPIO_PULL_DOWN, NMK_GPIO_PULL_UP, and NMK_GPIO_PULL_NONE + * + * Enables/disables pull up/down on a specified pin. This only takes effect if + * the pin is configured as an input (either explicitly or by the alternate + * function). + * + * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is + * configured as an input. Otherwise, due to the way the controller registers + * work, this function will change the value output on the pin. + */ +int nmk_gpio_set_pull(int gpio, enum nmk_gpio_pull pull) +{ + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + + nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); + __nmk_gpio_set_pull(nmk_chip, gpio - nmk_chip->chip.base, pull); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; +} + +/* Mode functions */ +/** + * nmk_gpio_set_mode() - set the mux mode of a gpio pin + * @gpio: pin number + * @gpio_mode: one of NMK_GPIO_ALT_GPIO, NMK_GPIO_ALT_A, + * NMK_GPIO_ALT_B, and NMK_GPIO_ALT_C + * + * Sets the mode of the specified pin to one of the alternate functions or + * plain GPIO. + */ +int nmk_gpio_set_mode(int gpio, int gpio_mode) +{ + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + + nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + spin_lock_irqsave(&nmk_chip->lock, flags); + __nmk_gpio_set_mode(nmk_chip, gpio - nmk_chip->chip.base, gpio_mode); + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; +} +EXPORT_SYMBOL(nmk_gpio_set_mode); + +int nmk_gpio_get_mode(int gpio) +{ + struct nmk_gpio_chip *nmk_chip; + u32 afunc, bfunc, bit; + + nmk_chip = irq_get_chip_data(NOMADIK_GPIO_TO_IRQ(gpio)); + if (!nmk_chip) + return -EINVAL; + + bit = 1 << (gpio - nmk_chip->chip.base); + + afunc = readl(nmk_chip->addr + NMK_GPIO_AFSLA) & bit; + bfunc = readl(nmk_chip->addr + NMK_GPIO_AFSLB) & bit; + + return (afunc ? NMK_GPIO_ALT_A : 0) | (bfunc ? NMK_GPIO_ALT_B : 0); +} +EXPORT_SYMBOL(nmk_gpio_get_mode); + + +/* IRQ functions */ +static inline int nmk_gpio_get_bitmask(int gpio) +{ + return 1 << (gpio % 32); +} + +static void nmk_gpio_irq_ack(struct irq_data *d) +{ + int gpio; + struct nmk_gpio_chip *nmk_chip; + + gpio = NOMADIK_IRQ_TO_GPIO(d->irq); + nmk_chip = irq_data_get_irq_chip_data(d); + if (!nmk_chip) + return; + writel(nmk_gpio_get_bitmask(gpio), nmk_chip->addr + NMK_GPIO_IC); +} + +enum nmk_gpio_irq_type { + NORMAL, + WAKE, +}; + +static void __nmk_gpio_irq_modify(struct nmk_gpio_chip *nmk_chip, + int gpio, enum nmk_gpio_irq_type which, + bool enable) +{ + u32 rimsc = which == WAKE ? NMK_GPIO_RWIMSC : NMK_GPIO_RIMSC; + u32 fimsc = which == WAKE ? NMK_GPIO_FWIMSC : NMK_GPIO_FIMSC; + u32 bitmask = nmk_gpio_get_bitmask(gpio); + u32 reg; + + /* we must individually set/clear the two edges */ + if (nmk_chip->edge_rising & bitmask) { + reg = readl(nmk_chip->addr + rimsc); + if (enable) + reg |= bitmask; + else + reg &= ~bitmask; + writel(reg, nmk_chip->addr + rimsc); + } + if (nmk_chip->edge_falling & bitmask) { + reg = readl(nmk_chip->addr + fimsc); + if (enable) + reg |= bitmask; + else + reg &= ~bitmask; + writel(reg, nmk_chip->addr + fimsc); + } +} + +static void __nmk_gpio_set_wake(struct nmk_gpio_chip *nmk_chip, + int gpio, bool on) +{ + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, on); +} + +static int nmk_gpio_irq_maskunmask(struct irq_data *d, bool enable) +{ + int gpio; + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + u32 bitmask; + + gpio = NOMADIK_IRQ_TO_GPIO(d->irq); + nmk_chip = irq_data_get_irq_chip_data(d); + bitmask = nmk_gpio_get_bitmask(gpio); + if (!nmk_chip) + return -EINVAL; + + if (enable) + nmk_chip->enabled |= bitmask; + else + nmk_chip->enabled &= ~bitmask; + + spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); + spin_lock(&nmk_chip->lock); + + __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, enable); + + if (!(nmk_chip->real_wake & bitmask)) + __nmk_gpio_set_wake(nmk_chip, gpio, enable); + + spin_unlock(&nmk_chip->lock); + spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); + + return 0; +} + +static void nmk_gpio_irq_mask(struct irq_data *d) +{ + nmk_gpio_irq_maskunmask(d, false); +} + +static void nmk_gpio_irq_unmask(struct irq_data *d) +{ + nmk_gpio_irq_maskunmask(d, true); +} + +static int nmk_gpio_irq_set_wake(struct irq_data *d, unsigned int on) +{ + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + u32 bitmask; + int gpio; + + gpio = NOMADIK_IRQ_TO_GPIO(d->irq); + nmk_chip = irq_data_get_irq_chip_data(d); + if (!nmk_chip) + return -EINVAL; + bitmask = nmk_gpio_get_bitmask(gpio); + + spin_lock_irqsave(&nmk_gpio_slpm_lock, flags); + spin_lock(&nmk_chip->lock); + + if (!(nmk_chip->enabled & bitmask)) + __nmk_gpio_set_wake(nmk_chip, gpio, on); + + if (on) + nmk_chip->real_wake |= bitmask; + else + nmk_chip->real_wake &= ~bitmask; + + spin_unlock(&nmk_chip->lock); + spin_unlock_irqrestore(&nmk_gpio_slpm_lock, flags); + + return 0; +} + +static int nmk_gpio_irq_set_type(struct irq_data *d, unsigned int type) +{ + bool enabled, wake = irqd_is_wakeup_set(d); + int gpio; + struct nmk_gpio_chip *nmk_chip; + unsigned long flags; + u32 bitmask; + + gpio = NOMADIK_IRQ_TO_GPIO(d->irq); + nmk_chip = irq_data_get_irq_chip_data(d); + bitmask = nmk_gpio_get_bitmask(gpio); + if (!nmk_chip) + return -EINVAL; + + if (type & IRQ_TYPE_LEVEL_HIGH) + return -EINVAL; + if (type & IRQ_TYPE_LEVEL_LOW) + return -EINVAL; + + enabled = nmk_chip->enabled & bitmask; + + spin_lock_irqsave(&nmk_chip->lock, flags); + + if (enabled) + __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, false); + + if (enabled || wake) + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, false); + + nmk_chip->edge_rising &= ~bitmask; + if (type & IRQ_TYPE_EDGE_RISING) + nmk_chip->edge_rising |= bitmask; + + nmk_chip->edge_falling &= ~bitmask; + if (type & IRQ_TYPE_EDGE_FALLING) + nmk_chip->edge_falling |= bitmask; + + if (enabled) + __nmk_gpio_irq_modify(nmk_chip, gpio, NORMAL, true); + + if (enabled || wake) + __nmk_gpio_irq_modify(nmk_chip, gpio, WAKE, true); + + spin_unlock_irqrestore(&nmk_chip->lock, flags); + + return 0; +} + +static struct irq_chip nmk_gpio_irq_chip = { + .name = "Nomadik-GPIO", + .irq_ack = nmk_gpio_irq_ack, + .irq_mask = nmk_gpio_irq_mask, + .irq_unmask = nmk_gpio_irq_unmask, + .irq_set_type = nmk_gpio_irq_set_type, + .irq_set_wake = nmk_gpio_irq_set_wake, +}; + +static void __nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc, + u32 status) +{ + struct nmk_gpio_chip *nmk_chip; + struct irq_chip *host_chip = irq_get_chip(irq); + unsigned int first_irq; + + chained_irq_enter(host_chip, desc); + + nmk_chip = irq_get_handler_data(irq); + first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); + while (status) { + int bit = __ffs(status); + + generic_handle_irq(first_irq + bit); + status &= ~BIT(bit); + } + + chained_irq_exit(host_chip, desc); +} + +static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq); + u32 status = readl(nmk_chip->addr + NMK_GPIO_IS); + + __nmk_gpio_irq_handler(irq, desc, status); +} + +static void nmk_gpio_secondary_irq_handler(unsigned int irq, + struct irq_desc *desc) +{ + struct nmk_gpio_chip *nmk_chip = irq_get_handler_data(irq); + u32 status = nmk_chip->get_secondary_status(nmk_chip->bank); + + __nmk_gpio_irq_handler(irq, desc, status); +} + +static int nmk_gpio_init_irq(struct nmk_gpio_chip *nmk_chip) +{ + unsigned int first_irq; + int i; + + first_irq = NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base); + for (i = first_irq; i < first_irq + nmk_chip->chip.ngpio; i++) { + irq_set_chip_and_handler(i, &nmk_gpio_irq_chip, + handle_edge_irq); + set_irq_flags(i, IRQF_VALID); + irq_set_chip_data(i, nmk_chip); + irq_set_irq_type(i, IRQ_TYPE_EDGE_FALLING); + } + + irq_set_chained_handler(nmk_chip->parent_irq, nmk_gpio_irq_handler); + irq_set_handler_data(nmk_chip->parent_irq, nmk_chip); + + if (nmk_chip->secondary_parent_irq >= 0) { + irq_set_chained_handler(nmk_chip->secondary_parent_irq, + nmk_gpio_secondary_irq_handler); + irq_set_handler_data(nmk_chip->secondary_parent_irq, nmk_chip); + } + + return 0; +} + +/* I/O Functions */ +static int nmk_gpio_make_input(struct gpio_chip *chip, unsigned offset) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + + writel(1 << offset, nmk_chip->addr + NMK_GPIO_DIRC); + return 0; +} + +static int nmk_gpio_get_input(struct gpio_chip *chip, unsigned offset) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + u32 bit = 1 << offset; + + return (readl(nmk_chip->addr + NMK_GPIO_DAT) & bit) != 0; +} + +static void nmk_gpio_set_output(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + + __nmk_gpio_set_output(nmk_chip, offset, val); +} + +static int nmk_gpio_make_output(struct gpio_chip *chip, unsigned offset, + int val) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + + __nmk_gpio_make_output(nmk_chip, offset, val); + + return 0; +} + +static int nmk_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + + return NOMADIK_GPIO_TO_IRQ(nmk_chip->chip.base) + offset; +} + +#ifdef CONFIG_DEBUG_FS + +#include + +static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + int mode; + unsigned i; + unsigned gpio = chip->base; + int is_out; + struct nmk_gpio_chip *nmk_chip = + container_of(chip, struct nmk_gpio_chip, chip); + const char *modes[] = { + [NMK_GPIO_ALT_GPIO] = "gpio", + [NMK_GPIO_ALT_A] = "altA", + [NMK_GPIO_ALT_B] = "altB", + [NMK_GPIO_ALT_C] = "altC", + }; + + for (i = 0; i < chip->ngpio; i++, gpio++) { + const char *label = gpiochip_is_requested(chip, i); + bool pull; + u32 bit = 1 << i; + + if (!label) + continue; + + is_out = readl(nmk_chip->addr + NMK_GPIO_DIR) & bit; + pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit); + mode = nmk_gpio_get_mode(gpio); + seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s", + gpio, label, + is_out ? "out" : "in ", + chip->get + ? (chip->get(chip, i) ? "hi" : "lo") + : "? ", + (mode < 0) ? "unknown" : modes[mode], + pull ? "pull" : "none"); + seq_printf(s, "\n"); + } +} + +#else +#define nmk_gpio_dbg_show NULL +#endif + +/* This structure is replicated for each GPIO block allocated at probe time */ +static struct gpio_chip nmk_gpio_template = { + .direction_input = nmk_gpio_make_input, + .get = nmk_gpio_get_input, + .direction_output = nmk_gpio_make_output, + .set = nmk_gpio_set_output, + .to_irq = nmk_gpio_to_irq, + .dbg_show = nmk_gpio_dbg_show, + .can_sleep = 0, +}; + +/* + * Called from the suspend/resume path to only keep the real wakeup interrupts + * (those that have had set_irq_wake() called on them) as wakeup interrupts, + * and not the rest of the interrupts which we needed to have as wakeups for + * cpuidle. + * + * PM ops are not used since this needs to be done at the end, after all the + * other drivers are done with their suspend callbacks. + */ +void nmk_gpio_wakeups_suspend(void) +{ + int i; + + for (i = 0; i < NUM_BANKS; i++) { + struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; + + if (!chip) + break; + + chip->rwimsc = readl(chip->addr + NMK_GPIO_RWIMSC); + chip->fwimsc = readl(chip->addr + NMK_GPIO_FWIMSC); + + writel(chip->rwimsc & chip->real_wake, + chip->addr + NMK_GPIO_RWIMSC); + writel(chip->fwimsc & chip->real_wake, + chip->addr + NMK_GPIO_FWIMSC); + + if (cpu_is_u8500v2()) { + chip->slpm = readl(chip->addr + NMK_GPIO_SLPC); + + /* 0 -> wakeup enable */ + writel(~chip->real_wake, chip->addr + NMK_GPIO_SLPC); + } + } +} + +void nmk_gpio_wakeups_resume(void) +{ + int i; + + for (i = 0; i < NUM_BANKS; i++) { + struct nmk_gpio_chip *chip = nmk_gpio_chips[i]; + + if (!chip) + break; + + writel(chip->rwimsc, chip->addr + NMK_GPIO_RWIMSC); + writel(chip->fwimsc, chip->addr + NMK_GPIO_FWIMSC); + + if (cpu_is_u8500v2()) + writel(chip->slpm, chip->addr + NMK_GPIO_SLPC); + } +} + +static int __devinit nmk_gpio_probe(struct platform_device *dev) +{ + struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; + struct nmk_gpio_chip *nmk_chip; + struct gpio_chip *chip; + struct resource *res; + struct clk *clk; + int secondary_irq; + int irq; + int ret; + + if (!pdata) + return -ENODEV; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENOENT; + goto out; + } + + irq = platform_get_irq(dev, 0); + if (irq < 0) { + ret = irq; + goto out; + } + + secondary_irq = platform_get_irq(dev, 1); + if (secondary_irq >= 0 && !pdata->get_secondary_status) { + ret = -EINVAL; + goto out; + } + + if (request_mem_region(res->start, resource_size(res), + dev_name(&dev->dev)) == NULL) { + ret = -EBUSY; + goto out; + } + + clk = clk_get(&dev->dev, NULL); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto out_release; + } + + clk_enable(clk); + + nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL); + if (!nmk_chip) { + ret = -ENOMEM; + goto out_clk; + } + /* + * The virt address in nmk_chip->addr is in the nomadik register space, + * so we can simply convert the resource address, without remapping + */ + nmk_chip->bank = dev->id; + nmk_chip->clk = clk; + nmk_chip->addr = io_p2v(res->start); + nmk_chip->chip = nmk_gpio_template; + nmk_chip->parent_irq = irq; + nmk_chip->secondary_parent_irq = secondary_irq; + nmk_chip->get_secondary_status = pdata->get_secondary_status; + nmk_chip->set_ioforce = pdata->set_ioforce; + spin_lock_init(&nmk_chip->lock); + + chip = &nmk_chip->chip; + chip->base = pdata->first_gpio; + chip->ngpio = pdata->num_gpio; + chip->label = pdata->name ?: dev_name(&dev->dev); + chip->dev = &dev->dev; + chip->owner = THIS_MODULE; + + ret = gpiochip_add(&nmk_chip->chip); + if (ret) + goto out_free; + + BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips)); + + nmk_gpio_chips[nmk_chip->bank] = nmk_chip; + platform_set_drvdata(dev, nmk_chip); + + nmk_gpio_init_irq(nmk_chip); + + dev_info(&dev->dev, "Bits %i-%i at address %p\n", + nmk_chip->chip.base, nmk_chip->chip.base+31, nmk_chip->addr); + return 0; + +out_free: + kfree(nmk_chip); +out_clk: + clk_disable(clk); + clk_put(clk); +out_release: + release_mem_region(res->start, resource_size(res)); +out: + dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret, + pdata->first_gpio, pdata->first_gpio+31); + return ret; +} + +static struct platform_driver nmk_gpio_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "gpio", + }, + .probe = nmk_gpio_probe, +}; + +static int __init nmk_gpio_init(void) +{ + return platform_driver_register(&nmk_gpio_driver); +} + +core_initcall(nmk_gpio_init); + +MODULE_AUTHOR("Prafulla WADASKAR and Alessandro Rubini"); +MODULE_DESCRIPTION("Nomadik GPIO Driver"); +MODULE_LICENSE("GPL"); + + -- cgit v1.2.3 From 8ea72a30a31c30ec7fa0c30c743b2cec0712d143 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 24 May 2011 23:07:09 +0200 Subject: gpio/nomadik: show all pins in debug Useful to check the status of the runtime pin muxing. Signed-off-by: Rabin Vincent Reviewed-by: Srinidhi Kasagar [Squashed, modified to use chip-internal IRQ trigger state] Signed-off-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/gpio/gpio-nomadik.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c index 307b8131aa8c..380204781f84 100644 --- a/drivers/gpio/gpio-nomadik.c +++ b/drivers/gpio/gpio-nomadik.c @@ -811,20 +811,43 @@ static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) bool pull; u32 bit = 1 << i; - if (!label) - continue; - is_out = readl(nmk_chip->addr + NMK_GPIO_DIR) & bit; pull = !(readl(nmk_chip->addr + NMK_GPIO_PDIS) & bit); mode = nmk_gpio_get_mode(gpio); seq_printf(s, " gpio-%-3d (%-20.20s) %s %s %s %s", - gpio, label, + gpio, label ?: "(none)", is_out ? "out" : "in ", chip->get ? (chip->get(chip, i) ? "hi" : "lo") : "? ", (mode < 0) ? "unknown" : modes[mode], pull ? "pull" : "none"); + + if (label && !is_out) { + int irq = gpio_to_irq(gpio); + struct irq_desc *desc = irq_to_desc(irq); + + /* This races with request_irq(), set_irq_type(), + * and set_irq_wake() ... but those are "rare". + */ + if (irq >= 0 && desc->action) { + char *trigger; + u32 bitmask = nmk_gpio_get_bitmask(gpio); + + if (nmk_chip->edge_rising & bitmask) + trigger = "edge-rising"; + else if (nmk_chip->edge_falling & bitmask) + trigger = "edge-falling"; + else + trigger = "edge-undefined"; + + seq_printf(s, " irq-%d %s%s", + irq, trigger, + irqd_is_wakeup_set(&desc->irq_data) + ? " wakeup" : ""); + } + } + seq_printf(s, "\n"); } } -- cgit v1.2.3 From bc6f5cf6484a509cfe0533b8ddf8b8ca60f35557 Mon Sep 17 00:00:00 2001 From: Rickard Andersson Date: Tue, 24 May 2011 23:07:17 +0200 Subject: gpio/nomadik: add function to read GPIO pull down status Signed-off-by: Rickard Andersson Reviewed-by: Martin Persson [Split off from larger patch] Signed-off-by: Linus Walleij Signed-off-by: Grant Likely --- arch/arm/plat-nomadik/include/plat/gpio.h | 2 ++ drivers/gpio/gpio-nomadik.c | 34 +++++++++++++++++++++++++++---- 2 files changed, 32 insertions(+), 4 deletions(-) diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h index 1b9f6f0843d1..ea19a5b2f227 100644 --- a/arch/arm/plat-nomadik/include/plat/gpio.h +++ b/arch/arm/plat-nomadik/include/plat/gpio.h @@ -78,6 +78,8 @@ extern int nmk_gpio_get_mode(int gpio); extern void nmk_gpio_wakeups_suspend(void); extern void nmk_gpio_wakeups_resume(void); +extern void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up); + /* * Platform data to register a block: only the initial gpio/irq number. */ diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c index 380204781f84..4961ef9bc153 100644 --- a/drivers/gpio/gpio-nomadik.c +++ b/drivers/gpio/gpio-nomadik.c @@ -57,6 +57,7 @@ struct nmk_gpio_chip { u32 fwimsc; u32 slpm; u32 enabled; + u32 pull_up; }; static struct nmk_gpio_chip * @@ -103,16 +104,22 @@ static void __nmk_gpio_set_pull(struct nmk_gpio_chip *nmk_chip, u32 pdis; pdis = readl(nmk_chip->addr + NMK_GPIO_PDIS); - if (pull == NMK_GPIO_PULL_NONE) + if (pull == NMK_GPIO_PULL_NONE) { pdis |= bit; - else + nmk_chip->pull_up &= ~bit; + } else { pdis &= ~bit; + } + writel(pdis, nmk_chip->addr + NMK_GPIO_PDIS); - if (pull == NMK_GPIO_PULL_UP) + if (pull == NMK_GPIO_PULL_UP) { + nmk_chip->pull_up |= bit; writel(bit, nmk_chip->addr + NMK_GPIO_DATS); - else if (pull == NMK_GPIO_PULL_DOWN) + } else if (pull == NMK_GPIO_PULL_DOWN) { + nmk_chip->pull_up &= ~bit; writel(bit, nmk_chip->addr + NMK_GPIO_DATC); + } } static void __nmk_gpio_make_input(struct nmk_gpio_chip *nmk_chip, @@ -921,6 +928,25 @@ void nmk_gpio_wakeups_resume(void) } } +/* + * Read the pull up/pull down status. + * A bit set in 'pull_up' means that pull up + * is selected if pull is enabled in PDIS register. + * Note: only pull up/down set via this driver can + * be detected due to HW limitations. + */ +void nmk_gpio_read_pull(int gpio_bank, u32 *pull_up) +{ + if (gpio_bank < NUM_BANKS) { + struct nmk_gpio_chip *chip = nmk_gpio_chips[gpio_bank]; + + if (!chip) + return; + + *pull_up = chip->pull_up; + } +} + static int __devinit nmk_gpio_probe(struct platform_device *dev) { struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; -- cgit v1.2.3 From fed6a0224714bd414bff91833e0bd5775a3e9c66 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Mon, 23 May 2011 17:27:38 +0900 Subject: gpio: Move to Samsung common GPIO library to drivers/gpio It's common gpiolib for recent Samsung SoCs. Move to drivers/gpio Signed-off-by: Kyungmin Park Signed-off-by: Grant Likely --- arch/arm/plat-samsung/Makefile | 1 - arch/arm/plat-samsung/gpiolib.c | 206 --------------------------------------- drivers/gpio/Kconfig | 6 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-plat-samsung.c | 206 +++++++++++++++++++++++++++++++++++++++ 5 files changed, 213 insertions(+), 207 deletions(-) delete mode 100644 arch/arm/plat-samsung/gpiolib.c create mode 100644 drivers/gpio/gpio-plat-samsung.c diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index e9de58a2e294..53eb15b0a07d 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -19,7 +19,6 @@ obj-y += gpio.o obj-y += gpio-config.o obj-y += dev-asocdma.o -obj-$(CONFIG_SAMSUNG_GPIOLIB_4BIT) += gpiolib.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o obj-$(CONFIG_SAMSUNG_IRQ_UART) += irq-uart.o diff --git a/arch/arm/plat-samsung/gpiolib.c b/arch/arm/plat-samsung/gpiolib.c deleted file mode 100644 index ea37c0461788..000000000000 --- a/arch/arm/plat-samsung/gpiolib.c +++ /dev/null @@ -1,206 +0,0 @@ -/* arch/arm/plat-samsung/gpiolib.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks - * http://armlinux.simtec.co.uk/ - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * SAMSUNG - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include - -#ifndef DEBUG_GPIO -#define gpio_dbg(x...) do { } while (0) -#else -#define gpio_dbg(x...) printk(KERN_DEBUG x) -#endif - -/* The samsung_gpiolib_4bit routines are to control the gpio banks where - * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the - * following example: - * - * base + 0x00: Control register, 4 bits per gpio - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n - * - * Note, since the data register is one bit per gpio and is at base + 0x4 - * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of - * the output. -*/ - -static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, base + GPIOCON_OFF); - - gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - unsigned long dat; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, base + GPIOCON_OFF); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -/* The next set of routines are for the case where the GPIO configuration - * registers are 4 bits per GPIO but there is more than one register (the - * bank has more than 8 GPIOs. - * - * This case is the similar to the 4 bit case, but the registers are as - * follows: - * - * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x08: Data register, 1 bit per gpio - * bit n: data bit n - * - * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we - * store the 'base + 0x4' address so that these routines see the data - * register at ourchip->base + 0x04. - */ - -static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned con_offset = offset; - - if (con_offset > 7) - con_offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = samsung_gpiolib_4bit_input; - chip->chip.direction_output = samsung_gpiolib_4bit_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = samsung_gpiolib_4bit2_input; - chip->chip.direction_output = samsung_gpiolib_4bit2_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - samsung_gpiolib_add_4bit(chip); - s3c_gpiolib_add(chip); - } -} - -void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - samsung_gpiolib_add_4bit2(chip); - s3c_gpiolib_add(chip); - } -} - -void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) - s3c_gpiolib_add(chip); -} diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index ebd1124b0764..3735c051074f 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -86,6 +86,12 @@ config GPIO_IT8761E help Say yes here to support GPIO functionality of IT8761E super I/O chip. +config GPIO_PLAT_SAMSUNG + bool "Samsung SoCs GPIO library support" + default y if SAMSUNG_GPIOLIB_4BIT + help + Say yes here to support Samsung SoCs GPIO library + config GPIO_PL061 bool "PrimeCell PL061 GPIO support" depends on ARM_AMBA diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 7481e7da2adb..426483f60d63 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o obj-$(CONFIG_GPIO_BASIC_MMIO_CORE) += basic_mmio_gpio.o obj-$(CONFIG_GPIO_BASIC_MMIO) += basic_mmio_gpio.o +obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o obj-$(CONFIG_GPIO_MAX730X) += max730x.o obj-$(CONFIG_GPIO_MAX7300) += max7300.o diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c new file mode 100644 index 000000000000..ea37c0461788 --- /dev/null +++ b/drivers/gpio/gpio-plat-samsung.c @@ -0,0 +1,206 @@ +/* arch/arm/plat-samsung/gpiolib.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks + * http://armlinux.simtec.co.uk/ + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * SAMSUNG - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include + +#ifndef DEBUG_GPIO +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +/* The samsung_gpiolib_4bit routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of + * the output. +*/ + +static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + GPIOCON_OFF); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, base + GPIOCON_OFF); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* The next set of routines are for the case where the GPIO configuration + * registers are 4 bits per GPIO but there is more than one register (the + * bank has more than 8 GPIOs. + * + * This case is the similar to the 4 bit case, but the registers are as + * follows: + * + * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x08: Data register, 1 bit per gpio + * bit n: data bit n + * + * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we + * store the 'base + 0x4' address so that these routines see the data + * register at ourchip->base + 0x04. + */ + +static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + if (con_offset > 7) + con_offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = samsung_gpiolib_4bit_input; + chip->chip.direction_output = samsung_gpiolib_4bit_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = samsung_gpiolib_4bit2_input; + chip->chip.direction_output = samsung_gpiolib_4bit2_output; + chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); +} + +void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + samsung_gpiolib_add_4bit(chip); + s3c_gpiolib_add(chip); + } +} + +void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + samsung_gpiolib_add_4bit2(chip); + s3c_gpiolib_add(chip); + } +} + +void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) + s3c_gpiolib_add(chip); +} -- cgit v1.2.3 From ab48f16137eb5a6fabcff4cc817319394fc0de7e Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Mon, 23 May 2011 17:27:45 +0900 Subject: gpio: Move the exynos4 GPIO to drivers/gpio Move the Samsung Exynos4 series SoCs GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park Signed-off-by: Grant Likely --- arch/arm/mach-exynos4/Makefile | 2 +- arch/arm/mach-exynos4/gpiolib.c | 365 ---------------------------------------- drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-exynos4.c | 365 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 373 insertions(+), 366 deletions(-) delete mode 100644 arch/arm/mach-exynos4/gpiolib.c create mode 100644 drivers/gpio/gpio-exynos4.c diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index 777897551e42..97837e75afa3 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -13,7 +13,7 @@ obj- := # Core support for EXYNOS4 system obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o diff --git a/arch/arm/mach-exynos4/gpiolib.c b/arch/arm/mach-exynos4/gpiolib.c deleted file mode 100644 index d54ca6adb660..000000000000 --- a/arch/arm/mach-exynos4/gpiolib.c +++ /dev/null @@ -1,365 +0,0 @@ -/* linux/arch/arm/mach-exynos4/gpiolib.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include -#include -#include -#include - -#include - -#include -#include -#include - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* - * Following are the gpio banks in v310. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPA0(0), - .ngpio = EXYNOS4_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = EXYNOS4_GPA1(0), - .ngpio = EXYNOS4_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = EXYNOS4_GPB(0), - .ngpio = EXYNOS4_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = EXYNOS4_GPC0(0), - .ngpio = EXYNOS4_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = EXYNOS4_GPC1(0), - .ngpio = EXYNOS4_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = EXYNOS4_GPD0(0), - .ngpio = EXYNOS4_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = EXYNOS4_GPD1(0), - .ngpio = EXYNOS4_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE0(0), - .ngpio = EXYNOS4_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = EXYNOS4_GPE1(0), - .ngpio = EXYNOS4_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE2(0), - .ngpio = EXYNOS4_GPIO_E2_NR, - .label = "GPE2", - }, - }, { - .chip = { - .base = EXYNOS4_GPE3(0), - .ngpio = EXYNOS4_GPIO_E3_NR, - .label = "GPE3", - }, - }, { - .chip = { - .base = EXYNOS4_GPE4(0), - .ngpio = EXYNOS4_GPIO_E4_NR, - .label = "GPE4", - }, - }, { - .chip = { - .base = EXYNOS4_GPF0(0), - .ngpio = EXYNOS4_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = EXYNOS4_GPF1(0), - .ngpio = EXYNOS4_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = EXYNOS4_GPF2(0), - .ngpio = EXYNOS4_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = EXYNOS4_GPF3(0), - .ngpio = EXYNOS4_GPIO_F3_NR, - .label = "GPF3", - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPJ0(0), - .ngpio = EXYNOS4_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = EXYNOS4_GPJ1(0), - .ngpio = EXYNOS4_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK0(0), - .ngpio = EXYNOS4_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .chip = { - .base = EXYNOS4_GPK1(0), - .ngpio = EXYNOS4_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK2(0), - .ngpio = EXYNOS4_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .chip = { - .base = EXYNOS4_GPK3(0), - .ngpio = EXYNOS4_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .chip = { - .base = EXYNOS4_GPL0(0), - .ngpio = EXYNOS4_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .chip = { - .base = EXYNOS4_GPL1(0), - .ngpio = EXYNOS4_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .chip = { - .base = EXYNOS4_GPL2(0), - .ngpio = EXYNOS4_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY0(0), - .ngpio = EXYNOS4_GPIO_Y0_NR, - .label = "GPY0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY1(0), - .ngpio = EXYNOS4_GPIO_Y1_NR, - .label = "GPY1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY2(0), - .ngpio = EXYNOS4_GPIO_Y2_NR, - .label = "GPY2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY3(0), - .ngpio = EXYNOS4_GPIO_Y3_NR, - .label = "GPY3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY4(0), - .ngpio = EXYNOS4_GPIO_Y4_NR, - .label = "GPY4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY5(0), - .ngpio = EXYNOS4_GPIO_Y5_NR, - .label = "GPY5", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY6(0), - .ngpio = EXYNOS4_GPIO_Y6_NR, - .label = "GPY6", - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = EXYNOS4_GPX0(0), - .ngpio = EXYNOS4_GPIO_X0_NR, - .label = "GPX0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = EXYNOS4_GPX1(0), - .ngpio = EXYNOS4_GPIO_X1_NR, - .label = "GPX1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = EXYNOS4_GPX2(0), - .ngpio = EXYNOS4_GPIO_X2_NR, - .label = "GPX2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = EXYNOS4_GPX3(0), - .ngpio = EXYNOS4_GPIO_X3_NR, - .label = "GPX3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPZ(0), - .ngpio = EXYNOS4_GPIO_Z_NR, - .label = "GPZ", - }, - }, -}; - -static __init int exynos4_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int i; - int group = 0; - int nr_chips; - - /* GPIO part 1 */ - - chip = exynos4_gpio_part1_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO1 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips); - - /* GPIO part 2 */ - - chip = exynos4_gpio_part2_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO2 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips); - - /* GPIO part 3 */ - - chip = exynos4_gpio_part3_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO3 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); - s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); - - return 0; -} -core_initcall(exynos4_gpiolib_init); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 3735c051074f..dbe43b4e02ba 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -86,6 +86,12 @@ config GPIO_IT8761E help Say yes here to support GPIO functionality of IT8761E super I/O chip. +config GPIO_EXYNOS4 + bool "Samsung Exynos4 GPIO library support" + default y if CPU_EXYNOS4210 + help + Say yes here to support Samsung Exynos4 series SoCs GPIO library + config GPIO_PLAT_SAMSUNG bool "Samsung SoCs GPIO library support" default y if SAMSUNG_GPIOLIB_4BIT diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 426483f60d63..d7f960140bfb 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o obj-$(CONFIG_GPIO_BASIC_MMIO_CORE) += basic_mmio_gpio.o obj-$(CONFIG_GPIO_BASIC_MMIO) += basic_mmio_gpio.o +obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o obj-$(CONFIG_GPIO_MAX730X) += max730x.o diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c new file mode 100644 index 000000000000..d54ca6adb660 --- /dev/null +++ b/drivers/gpio/gpio-exynos4.c @@ -0,0 +1,365 @@ +/* linux/arch/arm/mach-exynos4/gpiolib.c + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS4 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include +#include + +#include + +#include +#include +#include + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +/* + * Following are the gpio banks in v310. + * + * The 'config' member when left to NULL, is initialized to the default + * structure gpio_cfg in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of s3c_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ +static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPA0(0), + .ngpio = EXYNOS4_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = EXYNOS4_GPA1(0), + .ngpio = EXYNOS4_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = EXYNOS4_GPB(0), + .ngpio = EXYNOS4_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = EXYNOS4_GPC0(0), + .ngpio = EXYNOS4_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = EXYNOS4_GPC1(0), + .ngpio = EXYNOS4_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = EXYNOS4_GPD0(0), + .ngpio = EXYNOS4_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = EXYNOS4_GPD1(0), + .ngpio = EXYNOS4_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE0(0), + .ngpio = EXYNOS4_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = EXYNOS4_GPE1(0), + .ngpio = EXYNOS4_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE2(0), + .ngpio = EXYNOS4_GPIO_E2_NR, + .label = "GPE2", + }, + }, { + .chip = { + .base = EXYNOS4_GPE3(0), + .ngpio = EXYNOS4_GPIO_E3_NR, + .label = "GPE3", + }, + }, { + .chip = { + .base = EXYNOS4_GPE4(0), + .ngpio = EXYNOS4_GPIO_E4_NR, + .label = "GPE4", + }, + }, { + .chip = { + .base = EXYNOS4_GPF0(0), + .ngpio = EXYNOS4_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = EXYNOS4_GPF1(0), + .ngpio = EXYNOS4_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = EXYNOS4_GPF2(0), + .ngpio = EXYNOS4_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = EXYNOS4_GPF3(0), + .ngpio = EXYNOS4_GPIO_F3_NR, + .label = "GPF3", + }, + }, +}; + +static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPJ0(0), + .ngpio = EXYNOS4_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = EXYNOS4_GPJ1(0), + .ngpio = EXYNOS4_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK0(0), + .ngpio = EXYNOS4_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = EXYNOS4_GPK1(0), + .ngpio = EXYNOS4_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK2(0), + .ngpio = EXYNOS4_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = EXYNOS4_GPK3(0), + .ngpio = EXYNOS4_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = EXYNOS4_GPL0(0), + .ngpio = EXYNOS4_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = EXYNOS4_GPL1(0), + .ngpio = EXYNOS4_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = EXYNOS4_GPL2(0), + .ngpio = EXYNOS4_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY0(0), + .ngpio = EXYNOS4_GPIO_Y0_NR, + .label = "GPY0", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY1(0), + .ngpio = EXYNOS4_GPIO_Y1_NR, + .label = "GPY1", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY2(0), + .ngpio = EXYNOS4_GPIO_Y2_NR, + .label = "GPY2", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY3(0), + .ngpio = EXYNOS4_GPIO_Y3_NR, + .label = "GPY3", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY4(0), + .ngpio = EXYNOS4_GPIO_Y4_NR, + .label = "GPY4", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY5(0), + .ngpio = EXYNOS4_GPIO_Y5_NR, + .label = "GPY5", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = EXYNOS4_GPY6(0), + .ngpio = EXYNOS4_GPIO_Y6_NR, + .label = "GPY6", + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC00), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(0), + .chip = { + .base = EXYNOS4_GPX0(0), + .ngpio = EXYNOS4_GPIO_X0_NR, + .label = "GPX0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC20), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(8), + .chip = { + .base = EXYNOS4_GPX1(0), + .ngpio = EXYNOS4_GPIO_X1_NR, + .label = "GPX1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC40), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(16), + .chip = { + .base = EXYNOS4_GPX2(0), + .ngpio = EXYNOS4_GPIO_X2_NR, + .label = "GPX2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC60), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(24), + .chip = { + .base = EXYNOS4_GPX3(0), + .ngpio = EXYNOS4_GPIO_X3_NR, + .label = "GPX3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +}; + +static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = { + { + .chip = { + .base = EXYNOS4_GPZ(0), + .ngpio = EXYNOS4_GPIO_Z_NR, + .label = "GPZ", + }, + }, +}; + +static __init int exynos4_gpiolib_init(void) +{ + struct s3c_gpio_chip *chip; + int i; + int group = 0; + int nr_chips; + + /* GPIO part 1 */ + + chip = exynos4_gpio_part1_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + /* Assign the GPIO interrupt group */ + chip->group = group++; + } + if (chip->base == NULL) + chip->base = S5P_VA_GPIO1 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips); + + /* GPIO part 2 */ + + chip = exynos4_gpio_part2_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + /* Assign the GPIO interrupt group */ + chip->group = group++; + } + if (chip->base == NULL) + chip->base = S5P_VA_GPIO2 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips); + + /* GPIO part 3 */ + + chip = exynos4_gpio_part3_4bit; + nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + /* Assign the GPIO interrupt group */ + chip->group = group++; + } + if (chip->base == NULL) + chip->base = S5P_VA_GPIO3 + (i) * 0x20; + } + + samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips); + s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); + s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); + + return 0; +} +core_initcall(exynos4_gpiolib_init); -- cgit v1.2.3 From 347ec4e47dd249c0620f429d8458fc42eed63e0e Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Mon, 23 May 2011 17:27:51 +0900 Subject: gpio: Move the s5pv210 GPIO to drivers/gpio Move the Samsung s5pv210 SoC GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park Signed-off-by: Grant Likely --- arch/arm/mach-s5pv210/Makefile | 2 +- arch/arm/mach-s5pv210/gpiolib.c | 288 ---------------------------------------- drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-s5pv210.c | 288 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 296 insertions(+), 289 deletions(-) delete mode 100644 arch/arm/mach-s5pv210/gpiolib.c create mode 100644 drivers/gpio/gpio-s5pv210.c diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 11f17907b4e8..50907aca006c 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -12,7 +12,7 @@ obj- := # Core support for S5PV210 system -obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o gpiolib.o +obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o diff --git a/arch/arm/mach-s5pv210/gpiolib.c b/arch/arm/mach-s5pv210/gpiolib.c deleted file mode 100644 index 1ba20a703e05..000000000000 --- a/arch/arm/mach-s5pv210/gpiolib.c +++ /dev/null @@ -1,288 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/gpiolib.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5PV210 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* GPIO bank's base address given the index of the bank in the - * list of all gpio banks. - */ -#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) - -/* - * Following are the gpio banks in v210. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { - { - .chip = { - .base = S5PV210_GPA0(0), - .ngpio = S5PV210_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PV210_GPA1(0), - .ngpio = S5PV210_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PV210_GPB(0), - .ngpio = S5PV210_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PV210_GPC0(0), - .ngpio = S5PV210_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = S5PV210_GPC1(0), - .ngpio = S5PV210_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = S5PV210_GPD0(0), - .ngpio = S5PV210_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = S5PV210_GPD1(0), - .ngpio = S5PV210_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = S5PV210_GPE0(0), - .ngpio = S5PV210_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PV210_GPE1(0), - .ngpio = S5PV210_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PV210_GPF0(0), - .ngpio = S5PV210_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PV210_GPF1(0), - .ngpio = S5PV210_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PV210_GPF2(0), - .ngpio = S5PV210_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PV210_GPF3(0), - .ngpio = S5PV210_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .chip = { - .base = S5PV210_GPG0(0), - .ngpio = S5PV210_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .chip = { - .base = S5PV210_GPG1(0), - .ngpio = S5PV210_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .chip = { - .base = S5PV210_GPG2(0), - .ngpio = S5PV210_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .chip = { - .base = S5PV210_GPG3(0), - .ngpio = S5PV210_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_GPI(0), - .ngpio = S5PV210_GPIO_I_NR, - .label = "GPI", - }, - }, { - .chip = { - .base = S5PV210_GPJ0(0), - .ngpio = S5PV210_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PV210_GPJ1(0), - .ngpio = S5PV210_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PV210_GPJ2(0), - .ngpio = S5PV210_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .chip = { - .base = S5PV210_GPJ3(0), - .ngpio = S5PV210_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .chip = { - .base = S5PV210_GPJ4(0), - .ngpio = S5PV210_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP01(0), - .ngpio = S5PV210_GPIO_MP01_NR, - .label = "MP01", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP02(0), - .ngpio = S5PV210_GPIO_MP02_NR, - .label = "MP02", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP03(0), - .ngpio = S5PV210_GPIO_MP03_NR, - .label = "MP03", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP04(0), - .ngpio = S5PV210_GPIO_MP04_NR, - .label = "MP04", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP05(0), - .ngpio = S5PV210_GPIO_MP05_NR, - .label = "MP05", - }, - }, { - .base = (S5P_VA_GPIO + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PV210_GPH0(0), - .ngpio = S5PV210_GPIO_H0_NR, - .label = "GPH0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PV210_GPH1(0), - .ngpio = S5PV210_GPIO_H1_NR, - .label = "GPH1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PV210_GPH2(0), - .ngpio = S5PV210_GPIO_H2_NR, - .label = "GPH2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PV210_GPH3(0), - .ngpio = S5PV210_GPIO_H3_NR, - .label = "GPH3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static __init int s5pv210_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; - int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); - int gpioint_group = 0; - int i = 0; - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - chip->group = gpioint_group++; - } - if (chip->base == NULL) - chip->base = S5PV210_BANK_BASE(i); - } - - samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); - - return 0; -} -core_initcall(s5pv210_gpiolib_init); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index dbe43b4e02ba..92d16fdec206 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -98,6 +98,12 @@ config GPIO_PLAT_SAMSUNG help Say yes here to support Samsung SoCs GPIO library +config GPIO_S5PV210 + bool "Samsung S5PV210/S5PC110 GPIO library support" + default y if CPU_S5PV210 + help + Say yes here to support Samsung S5PV210/S5PC110 SoCs GPIO library + config GPIO_PL061 bool "PrimeCell PL061 GPIO support" depends on ARM_AMBA diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index d7f960140bfb..2edf6d660b32 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_GPIO_BASIC_MMIO_CORE) += basic_mmio_gpio.o obj-$(CONFIG_GPIO_BASIC_MMIO) += basic_mmio_gpio.o obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o +obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o obj-$(CONFIG_GPIO_MAX730X) += max730x.o obj-$(CONFIG_GPIO_MAX7300) += max7300.o diff --git a/drivers/gpio/gpio-s5pv210.c b/drivers/gpio/gpio-s5pv210.c new file mode 100644 index 000000000000..1ba20a703e05 --- /dev/null +++ b/drivers/gpio/gpio-s5pv210.c @@ -0,0 +1,288 @@ +/* linux/arch/arm/mach-s5pv210/gpiolib.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +/* GPIO bank's base address given the index of the bank in the + * list of all gpio banks. + */ +#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) + +/* + * Following are the gpio banks in v210. + * + * The 'config' member when left to NULL, is initialized to the default + * structure gpio_cfg in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of s3c_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ +static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { + { + .chip = { + .base = S5PV210_GPA0(0), + .ngpio = S5PV210_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PV210_GPA1(0), + .ngpio = S5PV210_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PV210_GPB(0), + .ngpio = S5PV210_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PV210_GPC0(0), + .ngpio = S5PV210_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = S5PV210_GPC1(0), + .ngpio = S5PV210_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = S5PV210_GPD0(0), + .ngpio = S5PV210_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = S5PV210_GPD1(0), + .ngpio = S5PV210_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = S5PV210_GPE0(0), + .ngpio = S5PV210_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PV210_GPE1(0), + .ngpio = S5PV210_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PV210_GPF0(0), + .ngpio = S5PV210_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PV210_GPF1(0), + .ngpio = S5PV210_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PV210_GPF2(0), + .ngpio = S5PV210_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PV210_GPF3(0), + .ngpio = S5PV210_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .chip = { + .base = S5PV210_GPG0(0), + .ngpio = S5PV210_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = S5PV210_GPG1(0), + .ngpio = S5PV210_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = S5PV210_GPG2(0), + .ngpio = S5PV210_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = S5PV210_GPG3(0), + .ngpio = S5PV210_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_GPI(0), + .ngpio = S5PV210_GPIO_I_NR, + .label = "GPI", + }, + }, { + .chip = { + .base = S5PV210_GPJ0(0), + .ngpio = S5PV210_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PV210_GPJ1(0), + .ngpio = S5PV210_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PV210_GPJ2(0), + .ngpio = S5PV210_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .chip = { + .base = S5PV210_GPJ3(0), + .ngpio = S5PV210_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .chip = { + .base = S5PV210_GPJ4(0), + .ngpio = S5PV210_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP01(0), + .ngpio = S5PV210_GPIO_MP01_NR, + .label = "MP01", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP02(0), + .ngpio = S5PV210_GPIO_MP02_NR, + .label = "MP02", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP03(0), + .ngpio = S5PV210_GPIO_MP03_NR, + .label = "MP03", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP04(0), + .ngpio = S5PV210_GPIO_MP04_NR, + .label = "MP04", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PV210_MP05(0), + .ngpio = S5PV210_GPIO_MP05_NR, + .label = "MP05", + }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(0), + .chip = { + .base = S5PV210_GPH0(0), + .ngpio = S5PV210_GPIO_H0_NR, + .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(8), + .chip = { + .base = S5PV210_GPH1(0), + .ngpio = S5PV210_GPIO_H1_NR, + .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(16), + .chip = { + .base = S5PV210_GPH2(0), + .ngpio = S5PV210_GPIO_H2_NR, + .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .config = &gpio_cfg_noint, + .irq_base = IRQ_EINT(24), + .chip = { + .base = S5PV210_GPH3(0), + .ngpio = S5PV210_GPIO_H3_NR, + .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +}; + +static __init int s5pv210_gpiolib_init(void) +{ + struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; + int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); + int gpioint_group = 0; + int i = 0; + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + chip->group = gpioint_group++; + } + if (chip->base == NULL) + chip->base = S5PV210_BANK_BASE(i); + } + + samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips); + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); + + return 0; +} +core_initcall(s5pv210_gpiolib_init); -- cgit v1.2.3 From 82ab0f75ee2f5defe300eadc91635aa455e01afd Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Mon, 23 May 2011 17:27:58 +0900 Subject: gpio: Move the s5pc100 GPIO to drivers/gpio Move the Samsung s5pc100 SoC GPIO driver to drivers/gpio Signed-off-by: Kyungmin Park Signed-off-by: Grant Likely --- arch/arm/mach-s5pc100/Makefile | 2 +- arch/arm/mach-s5pc100/gpiolib.c | 355 ---------------------------------------- drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-s5pc100.c | 355 ++++++++++++++++++++++++++++++++++++++++ 5 files changed, 363 insertions(+), 356 deletions(-) delete mode 100644 arch/arm/mach-s5pc100/gpiolib.c create mode 100644 drivers/gpio/gpio-s5pc100.c diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile index eecab57d2e5d..a5e6e608b498 100644 --- a/arch/arm/mach-s5pc100/Makefile +++ b/arch/arm/mach-s5pc100/Makefile @@ -11,7 +11,7 @@ obj- := # Core support for S5PC100 system -obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o gpiolib.o +obj-$(CONFIG_CPU_S5PC100) += cpu.o init.o clock.o obj-$(CONFIG_CPU_S5PC100) += setup-i2c0.o obj-$(CONFIG_CPU_S5PC100) += dma.o diff --git a/arch/arm/mach-s5pc100/gpiolib.c b/arch/arm/mach-s5pc100/gpiolib.c deleted file mode 100644 index 2842394b28b5..000000000000 --- a/arch/arm/mach-s5pc100/gpiolib.c +++ /dev/null @@ -1,355 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/gpiolib.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2009 Samsung Electronics Co - * Kyungmin Park - * - * S5PC100 - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -/* S5PC100 GPIO bank summary: - * - * Bank GPIOs Style INT Type - * A0 8 4Bit GPIO_INT0 - * A1 5 4Bit GPIO_INT1 - * B 8 4Bit GPIO_INT2 - * C 5 4Bit GPIO_INT3 - * D 7 4Bit GPIO_INT4 - * E0 8 4Bit GPIO_INT5 - * E1 6 4Bit GPIO_INT6 - * F0 8 4Bit GPIO_INT7 - * F1 8 4Bit GPIO_INT8 - * F2 8 4Bit GPIO_INT9 - * F3 4 4Bit GPIO_INT10 - * G0 8 4Bit GPIO_INT11 - * G1 3 4Bit GPIO_INT12 - * G2 7 4Bit GPIO_INT13 - * G3 7 4Bit GPIO_INT14 - * H0 8 4Bit WKUP_INT - * H1 8 4Bit WKUP_INT - * H2 8 4Bit WKUP_INT - * H3 8 4Bit WKUP_INT - * I 8 4Bit GPIO_INT15 - * J0 8 4Bit GPIO_INT16 - * J1 5 4Bit GPIO_INT17 - * J2 8 4Bit GPIO_INT18 - * J3 8 4Bit GPIO_INT19 - * J4 4 4Bit GPIO_INT20 - * K0 8 4Bit None - * K1 6 4Bit None - * K2 8 4Bit None - * K3 8 4Bit None - * L0 8 4Bit None - * L1 8 4Bit None - * L2 8 4Bit None - * L3 8 4Bit None - */ - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_eint = { - .cfg_eint = 0xf, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* - * GPIO bank's base address given the index of the bank in the - * list of all gpio banks. - */ -#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) - -/* - * Following are the gpio banks in S5PC100. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pc100_gpio_chips[] = { - { - .chip = { - .base = S5PC100_GPA0(0), - .ngpio = S5PC100_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PC100_GPA1(0), - .ngpio = S5PC100_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PC100_GPB(0), - .ngpio = S5PC100_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PC100_GPC(0), - .ngpio = S5PC100_GPIO_C_NR, - .label = "GPC", - }, - }, { - .chip = { - .base = S5PC100_GPD(0), - .ngpio = S5PC100_GPIO_D_NR, - .label = "GPD", - }, - }, { - .chip = { - .base = S5PC100_GPE0(0), - .ngpio = S5PC100_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PC100_GPE1(0), - .ngpio = S5PC100_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PC100_GPF0(0), - .ngpio = S5PC100_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PC100_GPF1(0), - .ngpio = S5PC100_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PC100_GPF2(0), - .ngpio = S5PC100_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PC100_GPF3(0), - .ngpio = S5PC100_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .chip = { - .base = S5PC100_GPG0(0), - .ngpio = S5PC100_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .chip = { - .base = S5PC100_GPG1(0), - .ngpio = S5PC100_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .chip = { - .base = S5PC100_GPG2(0), - .ngpio = S5PC100_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .chip = { - .base = S5PC100_GPG3(0), - .ngpio = S5PC100_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .chip = { - .base = S5PC100_GPI(0), - .ngpio = S5PC100_GPIO_I_NR, - .label = "GPI", - }, - }, { - .chip = { - .base = S5PC100_GPJ0(0), - .ngpio = S5PC100_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PC100_GPJ1(0), - .ngpio = S5PC100_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PC100_GPJ2(0), - .ngpio = S5PC100_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .chip = { - .base = S5PC100_GPJ3(0), - .ngpio = S5PC100_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .chip = { - .base = S5PC100_GPJ4(0), - .ngpio = S5PC100_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK0(0), - .ngpio = S5PC100_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK1(0), - .ngpio = S5PC100_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK2(0), - .ngpio = S5PC100_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK3(0), - .ngpio = S5PC100_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL0(0), - .ngpio = S5PC100_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL1(0), - .ngpio = S5PC100_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL2(0), - .ngpio = S5PC100_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL3(0), - .ngpio = S5PC100_GPIO_L3_NR, - .label = "GPL3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL4(0), - .ngpio = S5PC100_GPIO_L4_NR, - .label = "GPL4", - }, - }, { - .base = (S5P_VA_GPIO + 0xC00), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PC100_GPH0(0), - .ngpio = S5PC100_GPIO_H0_NR, - .label = "GPH0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC20), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PC100_GPH1(0), - .ngpio = S5PC100_GPIO_H1_NR, - .label = "GPH1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC40), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PC100_GPH2(0), - .ngpio = S5PC100_GPIO_H2_NR, - .label = "GPH2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC60), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PC100_GPH3(0), - .ngpio = S5PC100_GPIO_H3_NR, - .label = "GPH3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static __init int s5pc100_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s5pc100_gpio_chips; - int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); - int gpioint_group = 0; - int i; - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - chip->group = gpioint_group++; - } - if (chip->base == NULL) - chip->base = S5PC100_BANK_BASE(i); - } - - samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); - - return 0; -} -core_initcall(s5pc100_gpiolib_init); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 92d16fdec206..2c30911b2414 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -98,6 +98,12 @@ config GPIO_PLAT_SAMSUNG help Say yes here to support Samsung SoCs GPIO library +config GPIO_S5PC100 + bool "Samsung S5PC100 GPIO library support" + default y if CPU_S5PC100 + help + Say yes here to support Samsung S5PC100 SoCs GPIO library + config GPIO_S5PV210 bool "Samsung S5PV210/S5PC110 GPIO library support" default y if CPU_S5PV210 diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 2edf6d660b32..7d5b5470ed0d 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_GPIO_BASIC_MMIO_CORE) += basic_mmio_gpio.o obj-$(CONFIG_GPIO_BASIC_MMIO) += basic_mmio_gpio.o obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o +obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o obj-$(CONFIG_GPIO_MAX730X) += max730x.o diff --git a/drivers/gpio/gpio-s5pc100.c b/drivers/gpio/gpio-s5pc100.c new file mode 100644 index 000000000000..2842394b28b5 --- /dev/null +++ b/drivers/gpio/gpio-s5pc100.c @@ -0,0 +1,355 @@ +/* linux/arch/arm/mach-s5pc100/gpiolib.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Copyright 2009 Samsung Electronics Co + * Kyungmin Park + * + * S5PC100 - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +/* S5PC100 GPIO bank summary: + * + * Bank GPIOs Style INT Type + * A0 8 4Bit GPIO_INT0 + * A1 5 4Bit GPIO_INT1 + * B 8 4Bit GPIO_INT2 + * C 5 4Bit GPIO_INT3 + * D 7 4Bit GPIO_INT4 + * E0 8 4Bit GPIO_INT5 + * E1 6 4Bit GPIO_INT6 + * F0 8 4Bit GPIO_INT7 + * F1 8 4Bit GPIO_INT8 + * F2 8 4Bit GPIO_INT9 + * F3 4 4Bit GPIO_INT10 + * G0 8 4Bit GPIO_INT11 + * G1 3 4Bit GPIO_INT12 + * G2 7 4Bit GPIO_INT13 + * G3 7 4Bit GPIO_INT14 + * H0 8 4Bit WKUP_INT + * H1 8 4Bit WKUP_INT + * H2 8 4Bit WKUP_INT + * H3 8 4Bit WKUP_INT + * I 8 4Bit GPIO_INT15 + * J0 8 4Bit GPIO_INT16 + * J1 5 4Bit GPIO_INT17 + * J2 8 4Bit GPIO_INT18 + * J3 8 4Bit GPIO_INT19 + * J4 4 4Bit GPIO_INT20 + * K0 8 4Bit None + * K1 6 4Bit None + * K2 8 4Bit None + * K3 8 4Bit None + * L0 8 4Bit None + * L1 8 4Bit None + * L2 8 4Bit None + * L3 8 4Bit None + */ + +static struct s3c_gpio_cfg gpio_cfg = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_eint = { + .cfg_eint = 0xf, + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +/* + * GPIO bank's base address given the index of the bank in the + * list of all gpio banks. + */ +#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) + +/* + * Following are the gpio banks in S5PC100. + * + * The 'config' member when left to NULL, is initialized to the default + * structure gpio_cfg in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of s3c_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ +static struct s3c_gpio_chip s5pc100_gpio_chips[] = { + { + .chip = { + .base = S5PC100_GPA0(0), + .ngpio = S5PC100_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PC100_GPA1(0), + .ngpio = S5PC100_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PC100_GPB(0), + .ngpio = S5PC100_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PC100_GPC(0), + .ngpio = S5PC100_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S5PC100_GPD(0), + .ngpio = S5PC100_GPIO_D_NR, + .label = "GPD", + }, + }, { + .chip = { + .base = S5PC100_GPE0(0), + .ngpio = S5PC100_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PC100_GPE1(0), + .ngpio = S5PC100_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PC100_GPF0(0), + .ngpio = S5PC100_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PC100_GPF1(0), + .ngpio = S5PC100_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PC100_GPF2(0), + .ngpio = S5PC100_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PC100_GPF3(0), + .ngpio = S5PC100_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .chip = { + .base = S5PC100_GPG0(0), + .ngpio = S5PC100_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = S5PC100_GPG1(0), + .ngpio = S5PC100_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = S5PC100_GPG2(0), + .ngpio = S5PC100_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = S5PC100_GPG3(0), + .ngpio = S5PC100_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .chip = { + .base = S5PC100_GPI(0), + .ngpio = S5PC100_GPIO_I_NR, + .label = "GPI", + }, + }, { + .chip = { + .base = S5PC100_GPJ0(0), + .ngpio = S5PC100_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PC100_GPJ1(0), + .ngpio = S5PC100_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PC100_GPJ2(0), + .ngpio = S5PC100_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .chip = { + .base = S5PC100_GPJ3(0), + .ngpio = S5PC100_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .chip = { + .base = S5PC100_GPJ4(0), + .ngpio = S5PC100_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK0(0), + .ngpio = S5PC100_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK1(0), + .ngpio = S5PC100_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK2(0), + .ngpio = S5PC100_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPK3(0), + .ngpio = S5PC100_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL0(0), + .ngpio = S5PC100_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL1(0), + .ngpio = S5PC100_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL2(0), + .ngpio = S5PC100_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL3(0), + .ngpio = S5PC100_GPIO_L3_NR, + .label = "GPL3", + }, + }, { + .config = &gpio_cfg_noint, + .chip = { + .base = S5PC100_GPL4(0), + .ngpio = S5PC100_GPIO_L4_NR, + .label = "GPL4", + }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(0), + .chip = { + .base = S5PC100_GPH0(0), + .ngpio = S5PC100_GPIO_H0_NR, + .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(8), + .chip = { + .base = S5PC100_GPH1(0), + .ngpio = S5PC100_GPIO_H1_NR, + .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(16), + .chip = { + .base = S5PC100_GPH2(0), + .ngpio = S5PC100_GPIO_H2_NR, + .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .config = &gpio_cfg_eint, + .irq_base = IRQ_EINT(24), + .chip = { + .base = S5PC100_GPH3(0), + .ngpio = S5PC100_GPIO_H3_NR, + .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +}; + +static __init int s5pc100_gpiolib_init(void) +{ + struct s3c_gpio_chip *chip = s5pc100_gpio_chips; + int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); + int gpioint_group = 0; + int i; + + for (i = 0; i < nr_chips; i++, chip++) { + if (chip->config == NULL) { + chip->config = &gpio_cfg; + chip->group = gpioint_group++; + } + if (chip->base == NULL) + chip->base = S5PC100_BANK_BASE(i); + } + + samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips); + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); + + return 0; +} +core_initcall(s5pc100_gpiolib_init); -- cgit v1.2.3 From 5dbd05d46fb7d849570c8fa09d48591aa7ce1766 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Wed, 25 May 2011 23:36:30 +0530 Subject: maintainers: add dma engine tree details Signed-off-by: Vinod Koul Signed-off-by: Dan Williams --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 8f4413014b2d..443589306086 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2169,6 +2169,8 @@ M: Dan Williams S: Supported F: drivers/dma/ F: include/linux/dma* +T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx.git +T: git git://git.infradead.org/users/vkoul/slave-dma.git (slave-dma) DME1737 HARDWARE MONITOR DRIVER M: Juerg Haefliger -- cgit v1.2.3 From 19d78a61be6dd707dcec298c486303d4ba2c840a Mon Sep 17 00:00:00 2001 From: Dimitri Sivanich Date: Fri, 6 May 2011 10:33:44 -0500 Subject: x86: poll waiting for I/OAT DMA channel status For certain system configurations a 5 usec udelay before checking I/OAT DMA channel status is sometimes not sufficient, resulting in a false failure status and unnecessary freeing of channel resources. Conversely, for many configurations 5 usec is longer than necessary. Loop for up to 20 usec waiting for successful status before failing. Signed-off-by: Dimitri Sivanich Signed-off-by: Dan Williams --- drivers/dma/ioat/dma_v2.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/dma/ioat/dma_v2.c b/drivers/dma/ioat/dma_v2.c index effd140fc042..54d1a3c24e9c 100644 --- a/drivers/dma/ioat/dma_v2.c +++ b/drivers/dma/ioat/dma_v2.c @@ -507,6 +507,7 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) struct ioat_ring_ent **ring; u64 status; int order; + int i = 0; /* have we already been set up? */ if (ioat->ring) @@ -547,8 +548,11 @@ int ioat2_alloc_chan_resources(struct dma_chan *c) ioat2_start_null_desc(ioat); /* check that we got off the ground */ - udelay(5); - status = ioat_chansts(chan); + do { + udelay(1); + status = ioat_chansts(chan); + } while (i++ < 20 && !is_ioat_active(status) && !is_ioat_idle(status)); + if (is_ioat_active(status) || is_ioat_idle(status)) { set_bit(IOAT_RUN, &chan->state); return 1 << ioat->alloc_order; -- cgit v1.2.3 From 3474cb3cc0140f9cf6ca56983f8180b4b4c5c36a Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 10 May 2011 16:23:07 -0700 Subject: gpio: Convert gpio_is_valid to return bool Make the code a bit more readable. Instead of casting an int to an unsigned then comparing to MAX_NR_GPIOS, add a >= 0 test and let the compiler optimizer do the conversion to unsigned. The generated code should be the same. Signed-off-by: Joe Perches Acked-by: Linus Walleij Signed-off-by: Grant Likely --- include/asm-generic/gpio.h | 6 +++--- include/linux/gpio.h | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index ff5c66080c8c..a98b52cb970b 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -35,9 +35,9 @@ * platform data and other tables. */ -static inline int gpio_is_valid(int number) +static inline bool gpio_is_valid(int number) { - return ((unsigned)number) < ARCH_NR_GPIOS; + return number >= 0 && number < ARCH_NR_GPIOS; } struct device; @@ -212,7 +212,7 @@ extern void gpio_unexport(unsigned gpio); #else /* !CONFIG_GPIOLIB */ -static inline int gpio_is_valid(int number) +static inline bool gpio_is_valid(int number) { /* only non-negative numbers are valid */ return number >= 0; diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 32720baf70f1..0f8265f8e8c3 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -25,9 +25,9 @@ struct gpio_chip; * warning when something is wrongly called. */ -static inline int gpio_is_valid(int number) +static inline bool gpio_is_valid(int number) { - return 0; + return false; } static inline int gpio_request(unsigned gpio, const char *label) -- cgit v1.2.3 From 80b4037033c2dae31e73810d506ce93b3783be05 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 11 May 2011 20:39:05 +0800 Subject: spi/tle620x: add missing device_remove_file() This patch includes below fixes: 1. Add missing device_remove_file for dev_attr_status_show in tle62x0_remove. 2. Fix tle62x0_probe error handling: Currently, if the error happens when ptr > 0, gpio_attrs[0] is not properly remove. Signed-off-by: Axel Lin Acked-by: Ben Dooks Signed-off-by: Grant Likely --- drivers/spi/tle62x0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/tle62x0.c b/drivers/spi/tle62x0.c index a3938958147c..32a40876532f 100644 --- a/drivers/spi/tle62x0.c +++ b/drivers/spi/tle62x0.c @@ -283,7 +283,7 @@ static int __devinit tle62x0_probe(struct spi_device *spi) return 0; err_gpios: - for (; ptr > 0; ptr--) + while (--ptr >= 0) device_remove_file(&spi->dev, gpio_attrs[ptr]); device_remove_file(&spi->dev, &dev_attr_status_show); @@ -301,6 +301,7 @@ static int __devexit tle62x0_remove(struct spi_device *spi) for (ptr = 0; ptr < st->nr_gpio; ptr++) device_remove_file(&spi->dev, gpio_attrs[ptr]); + device_remove_file(&spi->dev, &dev_attr_status_show); kfree(st); return 0; } -- cgit v1.2.3 From 641a58d66d086327042e9d73c6606fd02c8f067c Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Thu, 26 May 2011 00:02:16 +0400 Subject: CIFS: Fix memory leak in cifs_do_mount and simplify error handling code. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index d1ed7f9946d5..1d2a93c60e75 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -556,9 +556,8 @@ cifs_do_mount(struct file_system_type *fs_type, sb = sget(fs_type, NULL, set_anon_super, NULL); if (IS_ERR(sb)) { - kfree(cifs_sb); root = ERR_CAST(sb); - goto out; + goto out_cifs_sb; } /* @@ -569,7 +568,7 @@ cifs_do_mount(struct file_system_type *fs_type, cifs_sb->mountdata = kstrndup(data, PAGE_SIZE, GFP_KERNEL); if (cifs_sb->mountdata == NULL) { root = ERR_PTR(-ENOMEM); - goto err_out; + goto out_super; } sb->s_flags = flags; @@ -581,21 +580,23 @@ cifs_do_mount(struct file_system_type *fs_type, flags & MS_SILENT ? 1 : 0); if (rc) { root = ERR_PTR(rc); - goto err_out; + goto out_super; } sb->s_flags |= MS_ACTIVE; root = dget(sb->s_root); -out: - cifs_cleanup_volume_info(&volume_info); - return root; + goto out; -err_out: +out_super: kfree(cifs_sb->mountdata); + deactivate_locked_super(sb); + +out_cifs_sb: unload_nls(cifs_sb->local_nls); kfree(cifs_sb); - deactivate_locked_super(sb); + +out: cifs_cleanup_volume_info(&volume_info); return root; } -- cgit v1.2.3 From 90f1e10d08bad84f8fd15d3469a60d437d4de64f Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 24 May 2011 13:17:53 -0700 Subject: [SCSI] libsas: fix/amend device gone notification in sas_deform_port() Commit 56dd2c06 "libsas: Don't issue commands to devices that have been hot-removed" edited Darrick's original patch to remove setting 'gone' in the sas_deform_port() path because that prevented scsi sync cache commands from being issued when the driver was unloaded. However, this allows true device gone notifications (as signaled port phy events) to trigger sync cache commands to devices that are known to be unreachable. Teach libsas which sas_deform_port() invocations are likely device gone events. Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_internal.h | 2 +- drivers/scsi/libsas/sas_phy.c | 4 ++-- drivers/scsi/libsas/sas_port.c | 21 ++++++++++++--------- 3 files changed, 15 insertions(+), 12 deletions(-) diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index 8b538bd1ff2b..14e21b5fb8ba 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -57,7 +57,7 @@ int sas_init_queue(struct sas_ha_struct *sas_ha); int sas_init_events(struct sas_ha_struct *sas_ha); void sas_shutdown_queue(struct sas_ha_struct *sas_ha); -void sas_deform_port(struct asd_sas_phy *phy); +void sas_deform_port(struct asd_sas_phy *phy, int gone); void sas_porte_bytes_dmaed(struct work_struct *work); void sas_porte_broadcast_rcvd(struct work_struct *work); diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c index b459c4b635b1..e0f5018e9071 100644 --- a/drivers/scsi/libsas/sas_phy.c +++ b/drivers/scsi/libsas/sas_phy.c @@ -39,7 +39,7 @@ static void sas_phye_loss_of_signal(struct work_struct *work) sas_begin_event(PHYE_LOSS_OF_SIGNAL, &phy->ha->event_lock, &phy->phy_events_pending); phy->error = 0; - sas_deform_port(phy); + sas_deform_port(phy, 1); } static void sas_phye_oob_done(struct work_struct *work) @@ -66,7 +66,7 @@ static void sas_phye_oob_error(struct work_struct *work) sas_begin_event(PHYE_OOB_ERROR, &phy->ha->event_lock, &phy->phy_events_pending); - sas_deform_port(phy); + sas_deform_port(phy, 1); if (!port && phy->enabled && i->dft->lldd_control_phy) { phy->error++; diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 5257fdfe699a..42fd1f25b664 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -57,7 +57,7 @@ static void sas_form_port(struct asd_sas_phy *phy) if (port) { if (!phy_is_wideport_member(port, phy)) - sas_deform_port(phy); + sas_deform_port(phy, 0); else { SAS_DPRINTK("%s: phy%d belongs to port%d already(%d)!\n", __func__, phy->id, phy->port->id, @@ -153,28 +153,31 @@ static void sas_form_port(struct asd_sas_phy *phy) * This is called when the physical link to the other phy has been * lost (on this phy), in Event thread context. We cannot delay here. */ -void sas_deform_port(struct asd_sas_phy *phy) +void sas_deform_port(struct asd_sas_phy *phy, int gone) { struct sas_ha_struct *sas_ha = phy->ha; struct asd_sas_port *port = phy->port; struct sas_internal *si = to_sas_internal(sas_ha->core.shost->transportt); + struct domain_device *dev; unsigned long flags; if (!port) return; /* done by a phy event */ - if (port->port_dev) - port->port_dev->pathways--; + dev = port->port_dev; + if (dev) + dev->pathways--; if (port->num_phys == 1) { + if (dev && gone) + dev->gone = 1; sas_unregister_domain_devices(port); sas_port_delete(port->port); port->port = NULL; } else sas_port_delete_phy(port->port, phy->phy); - if (si->dft->lldd_port_deformed) si->dft->lldd_port_deformed(phy); @@ -244,7 +247,7 @@ void sas_porte_link_reset_err(struct work_struct *work) sas_begin_event(PORTE_LINK_RESET_ERR, &phy->ha->event_lock, &phy->port_events_pending); - sas_deform_port(phy); + sas_deform_port(phy, 1); } void sas_porte_timer_event(struct work_struct *work) @@ -256,7 +259,7 @@ void sas_porte_timer_event(struct work_struct *work) sas_begin_event(PORTE_TIMER_EVENT, &phy->ha->event_lock, &phy->port_events_pending); - sas_deform_port(phy); + sas_deform_port(phy, 1); } void sas_porte_hard_reset(struct work_struct *work) @@ -268,7 +271,7 @@ void sas_porte_hard_reset(struct work_struct *work) sas_begin_event(PORTE_HARD_RESET, &phy->ha->event_lock, &phy->port_events_pending); - sas_deform_port(phy); + sas_deform_port(phy, 1); } /* ---------- SAS port registration ---------- */ @@ -306,6 +309,6 @@ void sas_unregister_ports(struct sas_ha_struct *sas_ha) for (i = 0; i < sas_ha->num_phys; i++) if (sas_ha->sas_phy[i]->port) - sas_deform_port(sas_ha->sas_phy[i]); + sas_deform_port(sas_ha->sas_phy[i], 0); } -- cgit v1.2.3 From 3673f4bf6a277f4f2944ad153ceb167b340f9ffc Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 24 May 2011 13:17:58 -0700 Subject: [SCSI] libsas: check dev->gone before submitting sata i/o Head off doomed-to-fail i/o in sas_queuecommand before sending it down the ata path. Before: sd 7:0:0:0: [sdd] Synchronizing SCSI cache ata8: no sense translation for status: 0x00 ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00 ata8.00: device reported invalid CHS sector 0 ata8: status=0x00 { } ata8: no sense translation for status: 0x00 ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00 ata8.00: device reported invalid CHS sector 0 ata8: status=0x00 { } ata8: no sense translation for status: 0x00 ata8: translated ATA stat/err 0x00/00 to SCSI SK/ASC/ASCQ 0xb/00/00 ata8.00: device reported invalid CHS sector 0 ata8: status=0x00 { } sd 7:0:0:0: [sdd] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 7:0:0:0: [sdd] Sense Key : Aborted Command [current] [descriptor] sd 7:0:0:0: [sdd] Add. Sense: No additional sense information sd 7:0:0:0: [sdd] Stopping disk After: sd 9:0:0:0: [sdd] Synchronizing SCSI cache sd 9:0:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 9:0:0:0: [sdd] Stopping disk sd 9:0:0:0: [sdd] START_STOP FAILED sd 9:0:0:0: [sdd] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK This is a cosmetic change as sata i/o can still leak to a gone device, but this addresses the nominal hotplug case when releasing the target. Acked-by: Jack Wang Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_scsi_host.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c index f6e189f40917..eeba76cdf774 100644 --- a/drivers/scsi/libsas/sas_scsi_host.c +++ b/drivers/scsi/libsas/sas_scsi_host.c @@ -207,6 +207,13 @@ static int sas_queuecommand_lck(struct scsi_cmnd *cmd, struct sas_ha_struct *sas_ha = dev->port->ha; struct sas_task *task; + /* If the device fell off, no sense in issuing commands */ + if (dev->gone) { + cmd->result = DID_BAD_TARGET << 16; + scsi_done(cmd); + goto out; + } + if (dev_is_sata(dev)) { unsigned long flags; @@ -216,13 +223,6 @@ static int sas_queuecommand_lck(struct scsi_cmnd *cmd, goto out; } - /* If the device fell off, no sense in issuing commands */ - if (dev->gone) { - cmd->result = DID_BAD_TARGET << 16; - scsi_done(cmd); - goto out; - } - res = -ENOMEM; task = sas_create_task(cmd, dev, GFP_ATOMIC); if (!task) -- cgit v1.2.3 From 1ca1e43e55f4cd068f997154ffaf5fa62b08b802 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Tue, 24 May 2011 13:18:04 -0700 Subject: [SCSI] libsas: Add option for SATA soft reset This allows a libsas driver to optionally provide a soft reset handler for libata to drive. The isci driver allows software to control the assertion/deassertion of SRST. [jejb: checkpatch.pl fixes] Signed-off-by: Dave Jiang Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_ata.c | 40 +++++++++++++++++++++++++++++++++++++++- include/scsi/libsas.h | 1 + 2 files changed, 40 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index e99301421409..db9238f2ecb8 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -295,6 +295,44 @@ static int sas_ata_hard_reset(struct ata_link *link, unsigned int *class, return ret; } +static int sas_ata_soft_reset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct domain_device *dev = ap->private_data; + struct sas_internal *i = + to_sas_internal(dev->port->ha->core.shost->transportt); + int res = TMF_RESP_FUNC_FAILED; + int ret = 0; + + if (i->dft->lldd_ata_soft_reset) + res = i->dft->lldd_ata_soft_reset(dev); + + if (res != TMF_RESP_FUNC_COMPLETE) { + SAS_DPRINTK("%s: Unable to soft reset\n", __func__); + ret = -EAGAIN; + } + + switch (dev->sata_dev.command_set) { + case ATA_COMMAND_SET: + SAS_DPRINTK("%s: Found ATA device.\n", __func__); + *class = ATA_DEV_ATA; + break; + case ATAPI_COMMAND_SET: + SAS_DPRINTK("%s: Found ATAPI device.\n", __func__); + *class = ATA_DEV_ATAPI; + break; + default: + SAS_DPRINTK("%s: Unknown SATA command set: %d.\n", + __func__, dev->sata_dev.command_set); + *class = ATA_DEV_UNKNOWN; + break; + } + + ap->cbl = ATA_CBL_SATA; + return ret; +} + static void sas_ata_post_internal(struct ata_queued_cmd *qc) { if (qc->flags & ATA_QCFLAG_FAILED) @@ -325,7 +363,7 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc) static struct ata_port_operations sas_sata_ops = { .prereset = ata_std_prereset, - .softreset = NULL, + .softreset = sas_ata_soft_reset, .hardreset = sas_ata_hard_reset, .postreset = ata_std_postreset, .error_handler = ata_std_error_handler, diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 8f6bb9c7f3eb..ee866060f8a4 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -604,6 +604,7 @@ struct sas_domain_function_template { int (*lldd_clear_aca)(struct domain_device *, u8 *lun); int (*lldd_clear_task_set)(struct domain_device *, u8 *lun); int (*lldd_I_T_nexus_reset)(struct domain_device *); + int (*lldd_ata_soft_reset)(struct domain_device *); int (*lldd_lu_reset)(struct domain_device *, u8 *lun); int (*lldd_query_task)(struct sas_task *); -- cgit v1.2.3 From 0558056c1ecd177f2621fc2a0484d565270f7ae1 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 24 May 2011 11:40:48 -0400 Subject: [SCSI] lpfc 8.3.24: Miscellaneous Fixes and Corrections Miscellaneous Fixes and Corrections - Remove the memset in the lpfc_sli4_remove_rpi_hdrs call. - Correct swapping of SGE word 2 relative to offset value - Reorganize CQ and EQ usage to comply with SLI4 Specification. - Expand the driver to check the rn bit. Only detect an error if the error bit is set and the RN bit is NOT set. - If mailbox completion code is not success AND the mailbox status is success, then and only then will the driver overwrite the mailbox status. - When driver initializing device, if the device is on a PCIe bus, set PCI's "needs fundamental reset" bit so that EEH uses fundamental reset instead of hot reset for recovery. - Prevent driver from using new WWN when changed in firmware (until driver reload) - When HBA reports maximum SGE size > 0xffffffff (infinite), override with 0x80000000. - Fixed potential missed SLI4 device initialization failure conditions. - Added 100ms delay before driver action following IF_TYPE_2 function reset. - Reverted patch to UNREG/REG on PLOGI to mapped/unmapped node. - Add a check for the CVL received flag in the fcf inuse routine to avoid unregistering the fcf if Devloss fires before Delay discover timer fires. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 1 + drivers/scsi/lpfc/lpfc_crtn.h | 1 + drivers/scsi/lpfc/lpfc_debugfs.c | 10 ++- drivers/scsi/lpfc/lpfc_hbadisc.c | 22 +++--- drivers/scsi/lpfc/lpfc_hw4.h | 2 +- drivers/scsi/lpfc/lpfc_init.c | 146 +++++++++++++++++++++++++++++-------- drivers/scsi/lpfc/lpfc_nportdisc.c | 11 +-- drivers/scsi/lpfc/lpfc_scsi.c | 3 + drivers/scsi/lpfc/lpfc_sli.c | 46 +++++++----- 9 files changed, 169 insertions(+), 73 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 02d53d89534f..3df2b39dd87a 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -41,6 +41,7 @@ struct lpfc_sli2_slim; downloads using bsg */ #define LPFC_DEFAULT_PROT_SG_SEG_CNT 4096 /* sg protection elements count */ #define LPFC_MAX_SG_SEG_CNT 4096 /* sg element count per scsi cmnd */ +#define LPFC_MAX_SGE_SIZE 0x80000000 /* Maximum data allowed in a SGE */ #define LPFC_MAX_PROT_SG_SEG_CNT 4096 /* prot sg element count per scsi cmd*/ #define LPFC_IOCB_LIST_CNT 2250 /* list of IOCBs for fast-path usage. */ #define LPFC_Q_RAMP_UP_INTERVAL 120 /* lun q_depth ramp up interval */ diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index f0b332f4eedb..eb02016a21b5 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -171,6 +171,7 @@ void lpfc_delayed_disc_tmo(unsigned long); void lpfc_delayed_disc_timeout_handler(struct lpfc_vport *); int lpfc_config_port_prep(struct lpfc_hba *); +void lpfc_update_vport_wwn(struct lpfc_vport *vport); int lpfc_config_port_post(struct lpfc_hba *); int lpfc_hba_down_prep(struct lpfc_hba *); int lpfc_hba_down_post(struct lpfc_hba *); diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index c93fca058603..ffe82d169b40 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -1665,7 +1665,8 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, /* Get fast-path complete queue information */ len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "Fast-path FCP CQ information:\n"); - for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) { + fcp_qidx = 0; + do { len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "Associated EQID[%02d]:\n", phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid); @@ -1678,7 +1679,7 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes, phba->sli4_hba.fcp_cq[fcp_qidx]->entry_size, phba->sli4_hba.fcp_cq[fcp_qidx]->host_index, phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index); - } + } while (++fcp_qidx < phba->cfg_fcp_eq_count); len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n"); /* Get mailbox queue information */ @@ -2012,7 +2013,8 @@ lpfc_idiag_queacc_write(struct file *file, const char __user *buf, goto pass_check; } /* FCP complete queue */ - for (qidx = 0; qidx < phba->cfg_fcp_eq_count; qidx++) { + qidx = 0; + do { if (phba->sli4_hba.fcp_cq[qidx]->queue_id == queid) { /* Sanity check */ rc = lpfc_idiag_que_param_check( @@ -2024,7 +2026,7 @@ lpfc_idiag_queacc_write(struct file *file, const char __user *buf, phba->sli4_hba.fcp_cq[qidx]; goto pass_check; } - } + } while (++qidx < phba->cfg_fcp_eq_count); goto error_out; break; case LPFC_IDIAG_MQ: diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 7a35df5e2038..2653c844d20d 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -2690,16 +2690,7 @@ lpfc_mbx_cmpl_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) memcpy((uint8_t *) &vport->fc_sparam, (uint8_t *) mp->virt, sizeof (struct serv_parm)); - if (phba->cfg_soft_wwnn) - u64_to_wwn(phba->cfg_soft_wwnn, - vport->fc_sparam.nodeName.u.wwn); - if (phba->cfg_soft_wwpn) - u64_to_wwn(phba->cfg_soft_wwpn, - vport->fc_sparam.portName.u.wwn); - memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, - sizeof(vport->fc_nodename)); - memcpy(&vport->fc_portname, &vport->fc_sparam.portName, - sizeof(vport->fc_portname)); + lpfc_update_vport_wwn(vport); if (vport->port_type == LPFC_PHYSICAL_PORT) { memcpy(&phba->wwnn, &vport->fc_nodename, sizeof(phba->wwnn)); memcpy(&phba->wwpn, &vport->fc_portname, sizeof(phba->wwnn)); @@ -5354,6 +5345,17 @@ lpfc_fcf_inuse(struct lpfc_hba *phba) for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) { shost = lpfc_shost_from_vport(vports[i]); spin_lock_irq(shost->host_lock); + /* + * IF the CVL_RCVD bit is not set then we have sent the + * flogi. + * If dev_loss fires while we are waiting we do not want to + * unreg the fcf. + */ + if (!(vports[i]->fc_flag & FC_VPORT_CVL_RCVD)) { + spin_unlock_irq(shost->host_lock); + ret = 1; + goto out; + } list_for_each_entry(ndlp, &vports[i]->fc_nodes, nlp_listp) { if (NLP_CHK_NODE_ACT(ndlp) && ndlp->rport && (ndlp->rport->roles & FC_RPORT_ROLE_FCP_TARGET)) { diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 4dff668ebdad..2e75f3df04fd 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -1229,7 +1229,7 @@ struct sli4_sge { /* SLI-4 */ uint32_t word2; #define lpfc_sli4_sge_offset_SHIFT 0 /* Offset of buffer - Not used*/ -#define lpfc_sli4_sge_offset_MASK 0x00FFFFFF +#define lpfc_sli4_sge_offset_MASK 0x1FFFFFFF #define lpfc_sli4_sge_offset_WORD word2 #define lpfc_sli4_sge_last_SHIFT 31 /* Last SEG in the SGL sets this flag !! */ diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 7dda036a1af3..f297f9d027dc 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -308,6 +308,45 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) return; } +/** + * lpfc_update_vport_wwn - Updates the fc_nodename, fc_portname, + * cfg_soft_wwnn, cfg_soft_wwpn + * @vport: pointer to lpfc vport data structure. + * + * + * Return codes + * None. + **/ +void +lpfc_update_vport_wwn(struct lpfc_vport *vport) +{ + /* If the soft name exists then update it using the service params */ + if (vport->phba->cfg_soft_wwnn) + u64_to_wwn(vport->phba->cfg_soft_wwnn, + vport->fc_sparam.nodeName.u.wwn); + if (vport->phba->cfg_soft_wwpn) + u64_to_wwn(vport->phba->cfg_soft_wwpn, + vport->fc_sparam.portName.u.wwn); + + /* + * If the name is empty or there exists a soft name + * then copy the service params name, otherwise use the fc name + */ + if (vport->fc_nodename.u.wwn[0] == 0 || vport->phba->cfg_soft_wwnn) + memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, + sizeof(struct lpfc_name)); + else + memcpy(&vport->fc_sparam.nodeName, &vport->fc_nodename, + sizeof(struct lpfc_name)); + + if (vport->fc_portname.u.wwn[0] == 0 || vport->phba->cfg_soft_wwpn) + memcpy(&vport->fc_portname, &vport->fc_sparam.portName, + sizeof(struct lpfc_name)); + else + memcpy(&vport->fc_sparam.portName, &vport->fc_portname, + sizeof(struct lpfc_name)); +} + /** * lpfc_config_port_post - Perform lpfc initialization after config port * @phba: pointer to lpfc hba data structure. @@ -377,17 +416,7 @@ lpfc_config_port_post(struct lpfc_hba *phba) lpfc_mbuf_free(phba, mp->virt, mp->phys); kfree(mp); pmb->context1 = NULL; - - if (phba->cfg_soft_wwnn) - u64_to_wwn(phba->cfg_soft_wwnn, - vport->fc_sparam.nodeName.u.wwn); - if (phba->cfg_soft_wwpn) - u64_to_wwn(phba->cfg_soft_wwpn, - vport->fc_sparam.portName.u.wwn); - memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, - sizeof (struct lpfc_name)); - memcpy(&vport->fc_portname, &vport->fc_sparam.portName, - sizeof (struct lpfc_name)); + lpfc_update_vport_wwn(vport); /* Update the fc_host data structures with new wwn. */ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn); @@ -3935,6 +3964,10 @@ lpfc_enable_pci_dev(struct lpfc_hba *phba) pci_try_set_mwi(pdev); pci_save_state(pdev); + /* PCIe EEH recovery on powerpc platforms needs fundamental reset */ + if (pci_find_capability(pdev, PCI_CAP_ID_EXP)) + pdev->needs_freset = 1; + return 0; out_disable_device: @@ -4366,6 +4399,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2759 Failed allocate memory for FCF round " "robin failover bmask\n"); + rc = -ENOMEM; goto out_remove_rpi_hdrs; } @@ -4375,6 +4409,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2572 Failed allocate memory for fast-path " "per-EQ handle array\n"); + rc = -ENOMEM; goto out_free_fcf_rr_bmask; } @@ -4384,6 +4419,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "2573 Failed allocate memory for msi-x " "interrupt vector entries\n"); + rc = -ENOMEM; goto out_free_fcp_eq_hdl; } @@ -4998,9 +5034,7 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba) kfree(rpi_hdr->dmabuf); kfree(rpi_hdr); } - phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base; - memset(phba->sli4_hba.rpi_bmask, 0, sizeof(*phba->sli4_hba.rpi_bmask)); } /** @@ -5487,7 +5521,8 @@ lpfc_sli4_post_status_check(struct lpfc_hba *phba) /* Final checks. The port status should be clean. */ if (lpfc_readl(phba->sli4_hba.u.if_type2.STATUSregaddr, ®_data.word0) || - bf_get(lpfc_sliport_status_err, ®_data)) { + (bf_get(lpfc_sliport_status_err, ®_data) && + !bf_get(lpfc_sliport_status_rn, ®_data))) { phba->work_status[0] = readl(phba->sli4_hba.u.if_type2. ERR1regaddr); @@ -6229,8 +6264,10 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba) phba->sli4_hba.mbx_cq = NULL; /* Release FCP response complete queue */ - for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) + fcp_qidx = 0; + do lpfc_sli4_queue_free(phba->sli4_hba.fcp_cq[fcp_qidx]); + while (++fcp_qidx < phba->cfg_fcp_eq_count); kfree(phba->sli4_hba.fcp_cq); phba->sli4_hba.fcp_cq = NULL; @@ -6353,16 +6390,24 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba) phba->sli4_hba.sp_eq->queue_id); /* Set up fast-path FCP Response Complete Queue */ - for (fcp_cqidx = 0; fcp_cqidx < phba->cfg_fcp_eq_count; fcp_cqidx++) { + fcp_cqidx = 0; + do { if (!phba->sli4_hba.fcp_cq[fcp_cqidx]) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0526 Fast-path FCP CQ (%d) not " "allocated\n", fcp_cqidx); goto out_destroy_fcp_cq; } - rc = lpfc_cq_create(phba, phba->sli4_hba.fcp_cq[fcp_cqidx], - phba->sli4_hba.fp_eq[fcp_cqidx], - LPFC_WCQ, LPFC_FCP); + if (phba->cfg_fcp_eq_count) + rc = lpfc_cq_create(phba, + phba->sli4_hba.fcp_cq[fcp_cqidx], + phba->sli4_hba.fp_eq[fcp_cqidx], + LPFC_WCQ, LPFC_FCP); + else + rc = lpfc_cq_create(phba, + phba->sli4_hba.fcp_cq[fcp_cqidx], + phba->sli4_hba.sp_eq, + LPFC_WCQ, LPFC_FCP); if (rc) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, "0527 Failed setup of fast-path FCP " @@ -6371,12 +6416,15 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba) } lpfc_printf_log(phba, KERN_INFO, LOG_INIT, "2588 FCP CQ setup: cq[%d]-id=%d, " - "parent eq[%d]-id=%d\n", + "parent %seq[%d]-id=%d\n", fcp_cqidx, phba->sli4_hba.fcp_cq[fcp_cqidx]->queue_id, + (phba->cfg_fcp_eq_count) ? "" : "sp_", fcp_cqidx, - phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id); - } + (phba->cfg_fcp_eq_count) ? + phba->sli4_hba.fp_eq[fcp_cqidx]->queue_id : + phba->sli4_hba.sp_eq->queue_id); + } while (++fcp_cqidx < phba->cfg_fcp_eq_count); /* * Set up all the Work Queues (WQs) @@ -6445,7 +6493,9 @@ lpfc_sli4_queue_setup(struct lpfc_hba *phba) fcp_cq_index, phba->sli4_hba.fcp_cq[fcp_cq_index]->queue_id); /* Round robin FCP Work Queue's Completion Queue assignment */ - fcp_cq_index = ((fcp_cq_index + 1) % phba->cfg_fcp_eq_count); + if (phba->cfg_fcp_eq_count) + fcp_cq_index = ((fcp_cq_index + 1) % + phba->cfg_fcp_eq_count); } /* @@ -6827,6 +6877,8 @@ lpfc_pci_function_reset(struct lpfc_hba *phba) if (rdy_chk < 1000) break; } + /* delay driver action following IF_TYPE_2 function reset */ + msleep(100); break; case LPFC_SLI_INTF_IF_TYPE_1: default: @@ -7419,11 +7471,15 @@ enable_msix_vectors: /* * Assign MSI-X vectors to interrupt handlers */ - - /* The first vector must associated to slow-path handler for MQ */ - rc = request_irq(phba->sli4_hba.msix_entries[0].vector, - &lpfc_sli4_sp_intr_handler, IRQF_SHARED, - LPFC_SP_DRIVER_HANDLER_NAME, phba); + if (vectors > 1) + rc = request_irq(phba->sli4_hba.msix_entries[0].vector, + &lpfc_sli4_sp_intr_handler, IRQF_SHARED, + LPFC_SP_DRIVER_HANDLER_NAME, phba); + else + /* All Interrupts need to be handled by one EQ */ + rc = request_irq(phba->sli4_hba.msix_entries[0].vector, + &lpfc_sli4_intr_handler, IRQF_SHARED, + LPFC_DRIVER_NAME, phba); if (rc) { lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, "0485 MSI-X slow-path request_irq failed " @@ -7878,6 +7934,11 @@ lpfc_pc_sli4_params_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) sli4_params->hdr_pp_align = bf_get(hdr_pp_align, &mqe->un.sli4_params); sli4_params->sgl_pages_max = bf_get(sgl_pages, &mqe->un.sli4_params); sli4_params->sgl_pp_align = bf_get(sgl_pp_align, &mqe->un.sli4_params); + + /* Make sure that sge_supp_len can be handled by the driver */ + if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE) + sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE; + return rc; } @@ -7938,6 +7999,11 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) mbx_sli4_parameters); sli4_params->sgl_pp_align = bf_get(cfg_sgl_pp_align, mbx_sli4_parameters); + + /* Make sure that sge_supp_len can be handled by the driver */ + if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE) + sli4_params->sge_supp_len = LPFC_MAX_SGE_SIZE; + return 0; } @@ -8591,6 +8657,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) int error; uint32_t cfg_mode, intr_mode; int mcnt; + int adjusted_fcp_eq_count; + int fcp_qidx; /* Allocate memory for HBA structure */ phba = lpfc_hba_alloc(pdev); @@ -8688,11 +8756,25 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) error = -ENODEV; goto out_free_sysfs_attr; } - /* Default to single FCP EQ for non-MSI-X */ + /* Default to single EQ for non-MSI-X */ if (phba->intr_type != MSIX) - phba->cfg_fcp_eq_count = 1; - else if (phba->sli4_hba.msix_vec_nr < phba->cfg_fcp_eq_count) - phba->cfg_fcp_eq_count = phba->sli4_hba.msix_vec_nr - 1; + adjusted_fcp_eq_count = 0; + else if (phba->sli4_hba.msix_vec_nr < + phba->cfg_fcp_eq_count + 1) + adjusted_fcp_eq_count = phba->sli4_hba.msix_vec_nr - 1; + else + adjusted_fcp_eq_count = phba->cfg_fcp_eq_count; + /* Free unused EQs */ + for (fcp_qidx = adjusted_fcp_eq_count; + fcp_qidx < phba->cfg_fcp_eq_count; + fcp_qidx++) { + lpfc_sli4_queue_free(phba->sli4_hba.fp_eq[fcp_qidx]); + /* do not delete the first fcp_cq */ + if (fcp_qidx) + lpfc_sli4_queue_free( + phba->sli4_hba.fcp_cq[fcp_qidx]); + } + phba->cfg_fcp_eq_count = adjusted_fcp_eq_count; /* Set up SLI-4 HBA */ if (lpfc_sli4_hba_setup(phba)) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 0d92d4205ea6..9bf7eb85d172 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -350,11 +350,7 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, ndlp->nlp_maxframe = ((sp->cmn.bbRcvSizeMsb & 0x0F) << 8) | sp->cmn.bbRcvSizeLsb; - /* - * Need to unreg_login if we are already in one of these states and - * change to NPR state. This will block the port until after the ACC - * completes and the reg_login is issued and completed. - */ + /* no need to reg_login if we are already in one of these states */ switch (ndlp->nlp_state) { case NLP_STE_NPR_NODE: if (!(ndlp->nlp_flag & NLP_NPR_ADISC)) @@ -363,9 +359,8 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, case NLP_STE_PRLI_ISSUE: case NLP_STE_UNMAPPED_NODE: case NLP_STE_MAPPED_NODE: - lpfc_unreg_rpi(vport, ndlp); - ndlp->nlp_prev_state = ndlp->nlp_state; - lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE); + lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, NULL); + return 1; } if ((vport->fc_flag & FC_PT2PT) && diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index 84e4481b2406..bc8359b038c4 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -861,6 +861,7 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) */ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_cmd)); sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_cmd)); + sgl->word2 = le32_to_cpu(sgl->word2); bf_set(lpfc_sli4_sge_last, sgl, 0); sgl->word2 = cpu_to_le32(sgl->word2); sgl->sge_len = cpu_to_le32(sizeof(struct fcp_cmnd)); @@ -869,6 +870,7 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) /* Setup the physical region for the FCP RSP */ sgl->addr_hi = cpu_to_le32(putPaddrHigh(pdma_phys_fcp_rsp)); sgl->addr_lo = cpu_to_le32(putPaddrLow(pdma_phys_fcp_rsp)); + sgl->word2 = le32_to_cpu(sgl->word2); bf_set(lpfc_sli4_sge_last, sgl, 1); sgl->word2 = cpu_to_le32(sgl->word2); sgl->sge_len = cpu_to_le32(sizeof(struct fcp_rsp)); @@ -2081,6 +2083,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd) dma_len = sg_dma_len(sgel); sgl->addr_lo = cpu_to_le32(putPaddrLow(physaddr)); sgl->addr_hi = cpu_to_le32(putPaddrHigh(physaddr)); + sgl->word2 = le32_to_cpu(sgl->word2); if ((num_bde + 1) == nseg) bf_set(lpfc_sli4_sge_last, sgl, 1); else diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index fd5835e1c039..dd911d6d0ee5 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -65,6 +65,9 @@ static struct lpfc_iocbq *lpfc_sli4_els_wcqe_to_rspiocbq(struct lpfc_hba *, struct lpfc_iocbq *); static void lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *, struct hbq_dmabuf *); +static int lpfc_sli4_fp_handle_wcqe(struct lpfc_hba *, struct lpfc_queue *, + struct lpfc_cqe *); + static IOCB_t * lpfc_get_iocb_from_iocbq(struct lpfc_iocbq *iocbq) { @@ -3881,8 +3884,10 @@ lpfc_sli4_brdreset(struct lpfc_hba *phba) list_del_init(&phba->sli4_hba.els_cq->list); for (qindx = 0; qindx < phba->cfg_fcp_wq_count; qindx++) list_del_init(&phba->sli4_hba.fcp_wq[qindx]->list); - for (qindx = 0; qindx < phba->cfg_fcp_eq_count; qindx++) + qindx = 0; + do list_del_init(&phba->sli4_hba.fcp_cq[qindx]->list); + while (++qindx < phba->cfg_fcp_eq_count); spin_unlock_irq(&phba->hbalock); /* Now physically reset the device */ @@ -4677,9 +4682,11 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba) lpfc_sli4_cq_release(phba->sli4_hba.mbx_cq, LPFC_QUEUE_REARM); lpfc_sli4_cq_release(phba->sli4_hba.els_cq, LPFC_QUEUE_REARM); - for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) + fcp_eqidx = 0; + do lpfc_sli4_cq_release(phba->sli4_hba.fcp_cq[fcp_eqidx], LPFC_QUEUE_REARM); + while (++fcp_eqidx < phba->cfg_fcp_eq_count); lpfc_sli4_eq_release(phba->sli4_hba.sp_eq, LPFC_QUEUE_REARM); for (fcp_eqidx = 0; fcp_eqidx < phba->cfg_fcp_eq_count; fcp_eqidx++) lpfc_sli4_eq_release(phba->sli4_hba.fp_eq[fcp_eqidx], @@ -4740,7 +4747,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) * to read FCoE param config regions */ if (lpfc_sli4_read_fcoe_params(phba, mboxq)) - lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT, + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_INIT, "2570 Failed to read FCoE parameters\n"); /* Issue READ_REV to collect vpd and FW information. */ @@ -4906,16 +4913,7 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) goto out_free_mbox; } - if (phba->cfg_soft_wwnn) - u64_to_wwn(phba->cfg_soft_wwnn, - vport->fc_sparam.nodeName.u.wwn); - if (phba->cfg_soft_wwpn) - u64_to_wwn(phba->cfg_soft_wwpn, - vport->fc_sparam.portName.u.wwn); - memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName, - sizeof(struct lpfc_name)); - memcpy(&vport->fc_portname, &vport->fc_sparam.portName, - sizeof(struct lpfc_name)); + lpfc_update_vport_wwn(vport); /* Update the fc_host data structures with new wwn. */ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn); @@ -5747,10 +5745,15 @@ lpfc_sli4_post_sync_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) lpfc_sli_pcimem_bcopy(&mbox_rgn->mcqe, &mboxq->mcqe, sizeof(struct lpfc_mcqe)); mcqe_status = bf_get(lpfc_mcqe_status, &mbox_rgn->mcqe); - - /* Prefix the mailbox status with range x4000 to note SLI4 status. */ + /* + * When the CQE status indicates a failure and the mailbox status + * indicates success then copy the CQE status into the mailbox status + * (and prefix it with x4000). + */ if (mcqe_status != MB_CQE_STATUS_SUCCESS) { - bf_set(lpfc_mqe_status, mb, LPFC_MBX_ERROR_RANGE | mcqe_status); + if (bf_get(lpfc_mqe_status, mb) == MBX_SUCCESS) + bf_set(lpfc_mqe_status, mb, + (LPFC_MBX_ERROR_RANGE | mcqe_status)); rc = MBXERR_ERROR; } else lpfc_sli4_swap_str(phba, mboxq); @@ -5819,7 +5822,7 @@ lpfc_sli_issue_mbox_s4(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq, else rc = -EIO; if (rc != MBX_SUCCESS) - lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI, "(%d):2541 Mailbox command x%x " "(x%x) cannot issue Data: x%x x%x\n", mboxq->vport ? mboxq->vport->vpi : 0, @@ -6307,6 +6310,7 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq, sgl->addr_hi = bpl->addrHigh; sgl->addr_lo = bpl->addrLow; + sgl->word2 = le32_to_cpu(sgl->word2); if ((i+1) == numBdes) bf_set(lpfc_sli4_sge_last, sgl, 1); else @@ -6343,6 +6347,7 @@ lpfc_sli4_bpl2sgl(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq, cpu_to_le32(icmd->un.genreq64.bdl.addrHigh); sgl->addr_lo = cpu_to_le32(icmd->un.genreq64.bdl.addrLow); + sgl->word2 = le32_to_cpu(sgl->word2); bf_set(lpfc_sli4_sge_last, sgl, 1); sgl->word2 = cpu_to_le32(sgl->word2); sgl->sge_len = @@ -9799,7 +9804,12 @@ lpfc_sli4_sp_handle_eqe(struct lpfc_hba *phba, struct lpfc_eqe *eqe) break; case LPFC_WCQ: while ((cqe = lpfc_sli4_cq_get(cq))) { - workposted |= lpfc_sli4_sp_handle_cqe(phba, cq, cqe); + if (cq->subtype == LPFC_FCP) + workposted |= lpfc_sli4_fp_handle_wcqe(phba, cq, + cqe); + else + workposted |= lpfc_sli4_sp_handle_cqe(phba, cq, + cqe); if (!(++ecount % LPFC_GET_QE_REL_INT)) lpfc_sli4_cq_release(cq, LPFC_QUEUE_NOARM); } -- cgit v1.2.3 From c0c1151276aae83dffbe3f2837a3b1d893894115 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 24 May 2011 11:41:34 -0400 Subject: [SCSI] lpfc 8.3.24: Extended hardware support and support dump images Extended hardware support and support dump images: - Make the size to be MAILBOX_SYSFS_MAX (4096) so that it allows the maximum sysfs binary access interface possible. - Add ids and model names for new hardware - Add capability of inducing SLI4 firmware dump obj file Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 64 ++++++++++++++++++++++++++++++++++++++++++- drivers/scsi/lpfc/lpfc_hw.h | 4 ++- drivers/scsi/lpfc/lpfc_hw4.h | 19 +++++++++++++ drivers/scsi/lpfc/lpfc_init.c | 18 ++++++++---- 4 files changed, 98 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 8dcbf8fff673..44816be4d724 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -754,6 +754,61 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, return status; } +/** + * lpfc_sli4_fw_dump_request - Request firmware to perform a firmware dump + * @phba: lpfc_hba pointer. + * + * Description: + * Request SLI4 interface type-2 device to perform a dump of firmware dump + * object into it's /dbg directory of the flash file system. + * + * Returns: + * zero for success + **/ +static ssize_t +lpfc_sli4_fw_dump_request(struct lpfc_hba *phba) +{ + struct completion online_compl; + uint32_t reg_val; + int status = 0; + int rc; + + if (!phba->cfg_enable_hba_reset) + return -EIO; + + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); + + if (status != 0) + return status; + + /* wait for the device to be quiesced before firmware reset */ + msleep(100); + + reg_val = readl(phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PDEV_CTL_OFFSET); + reg_val |= LPFC_FW_DUMP_REQUEST; + writel(reg_val, phba->sli4_hba.conf_regs_memmap_p + + LPFC_CTL_PDEV_CTL_OFFSET); + /* flush */ + readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); + + /* delay driver action following IF_TYPE_2 reset */ + msleep(100); + + init_completion(&online_compl); + rc = lpfc_workq_post_event(phba, &status, &online_compl, + LPFC_EVT_ONLINE); + if (rc == 0) + return -ENOMEM; + + wait_for_completion(&online_compl); + + if (status != 0) + return -EIO; + + return 0; +} + /** * lpfc_nport_evt_cnt_show - Return the number of nport events * @dev: class device that is converted into a Scsi_host. @@ -848,6 +903,13 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, return -EINVAL; else status = lpfc_do_offline(phba, LPFC_EVT_KILL); + else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0) + if ((phba->sli_rev < LPFC_SLI_REV4) || + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2)) + return -EPERM; + else + status = lpfc_sli4_fw_dump_request(phba); else return -EINVAL; @@ -3961,7 +4023,7 @@ static struct bin_attribute sysfs_mbox_attr = { .name = "mbox", .mode = S_IRUSR | S_IWUSR, }, - .size = MAILBOX_CMD_SIZE, + .size = MAILBOX_SYSFS_MAX, .read = sysfs_mbox_read, .write = sysfs_mbox_write, }; diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 86b6f7e6686a..6aa53aca23e9 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -1199,7 +1199,9 @@ typedef struct { #define PCI_DEVICE_ID_BALIUS 0xe131 #define PCI_DEVICE_ID_PROTEUS_PF 0xe180 #define PCI_DEVICE_ID_LANCER_FC 0xe200 +#define PCI_DEVICE_ID_LANCER_FC_VF 0xe208 #define PCI_DEVICE_ID_LANCER_FCOE 0xe260 +#define PCI_DEVICE_ID_LANCER_FCOE_VF 0xe268 #define PCI_DEVICE_ID_SAT_SMB 0xf011 #define PCI_DEVICE_ID_SAT_MID 0xf015 #define PCI_DEVICE_ID_RFLY 0xf095 @@ -3021,7 +3023,7 @@ typedef struct { #define MAILBOX_EXT_SIZE (MAILBOX_EXT_WSIZE * sizeof(uint32_t)) #define MAILBOX_HBA_EXT_OFFSET 0x100 /* max mbox xmit size is a page size for sysfs IO operations */ -#define MAILBOX_MAX_XMIT_SIZE PAGE_SIZE +#define MAILBOX_SYSFS_MAX 4096 typedef union { uint32_t varWords[MAILBOX_CMD_WSIZE - 1]; /* first word is type/ diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 2e75f3df04fd..ca7c1dd61938 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -170,6 +170,25 @@ struct lpfc_sli_intf { #define LPFC_PCI_FUNC3 3 #define LPFC_PCI_FUNC4 4 +/* SLI4 interface type-2 control register offsets */ +#define LPFC_CTL_PORT_SEM_OFFSET 0x400 +#define LPFC_CTL_PORT_STA_OFFSET 0x404 +#define LPFC_CTL_PORT_CTL_OFFSET 0x408 +#define LPFC_CTL_PORT_ER1_OFFSET 0x40C +#define LPFC_CTL_PORT_ER2_OFFSET 0x410 +#define LPFC_CTL_PDEV_CTL_OFFSET 0x414 + +/* Some SLI4 interface type-2 PDEV_CTL register bits */ +#define LPFC_CTL_PDEV_CTL_DRST 0x00000001 +#define LPFC_CTL_PDEV_CTL_FRST 0x00000002 +#define LPFC_CTL_PDEV_CTL_DD 0x00000004 +#define LPFC_CTL_PDEV_CTL_LC 0x00000008 +#define LPFC_CTL_PDEV_CTL_FRL_ALL 0x00 +#define LPFC_CTL_PDEV_CTL_FRL_FC_FCOE 0x10 +#define LPFC_CTL_PDEV_CTL_FRL_NIC 0x20 + +#define LPFC_FW_DUMP_REQUEST (LPFC_CTL_PDEV_CTL_DD | LPFC_CTL_PDEV_CTL_FRST) + /* Active interrupt test count */ #define LPFC_ACT_INTR_CNT 4 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index f297f9d027dc..16b4da4530b1 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -1784,7 +1784,9 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) && descp && descp[0] != '\0') return; - if (phba->lmt & LMT_10Gb) + if (phba->lmt & LMT_16Gb) + max_speed = 16; + else if (phba->lmt & LMT_10Gb) max_speed = 10; else if (phba->lmt & LMT_8Gb) max_speed = 8; @@ -1951,12 +1953,13 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) "Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LANCER_FC: - oneConnect = 1; - m = (typeof(m)){"Undefined", "PCIe", "Fibre Channel Adapter"}; + case PCI_DEVICE_ID_LANCER_FC_VF: + m = (typeof(m)){"LPe16000", "PCIe", "Fibre Channel Adapter"}; break; case PCI_DEVICE_ID_LANCER_FCOE: + case PCI_DEVICE_ID_LANCER_FCOE_VF: oneConnect = 1; - m = (typeof(m)){"Undefined", "PCIe", "FCoE"}; + m = (typeof(m)){"OCe50100", "PCIe", "FCoE"}; break; default: m = (typeof(m)){"Unknown", "", ""}; @@ -1965,7 +1968,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp) if (mdp && mdp[0] == '\0') snprintf(mdp, 79,"%s", m.name); - /* oneConnect hba requires special processing, they are all initiators + /* + * oneConnect hba requires special processing, they are all initiators * and we put the port number on the end */ if (descp && descp[0] == '\0') { @@ -9580,6 +9584,10 @@ static struct pci_device_id lpfc_id_table[] = { PCI_ANY_ID, PCI_ANY_ID, }, {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE, PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FC_VF, + PCI_ANY_ID, PCI_ANY_ID, }, + {PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LANCER_FCOE_VF, + PCI_ANY_ID, PCI_ANY_ID, }, { 0 } }; -- cgit v1.2.3 From 912e3acde60b3b9ebf46c5ec5ae6bd01b80132c8 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 24 May 2011 11:42:11 -0400 Subject: [SCSI] lpfc 8.3.24: Add SR-IOV control Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 1 + drivers/scsi/lpfc/lpfc_attr.c | 237 +++++++++++++++++++++++++++++++++++++++++- drivers/scsi/lpfc/lpfc_crtn.h | 2 + drivers/scsi/lpfc/lpfc_hw.h | 2 + drivers/scsi/lpfc/lpfc_hw4.h | 149 ++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_init.c | 144 ++++++++++++++++++++++++- drivers/scsi/lpfc/lpfc_sli4.h | 6 ++ 7 files changed, 536 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 3df2b39dd87a..9d0bfba5461e 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -660,6 +660,7 @@ struct lpfc_hba { uint32_t cfg_hostmem_hgp; uint32_t cfg_log_verbose; uint32_t cfg_aer_support; + uint32_t cfg_sriov_nr_virtfn; uint32_t cfg_iocb_cnt; uint32_t cfg_suppress_link_up; #define LPFC_INITIALIZE_LINK 0 /* do normal init_link mbox */ diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 44816be4d724..6ecd6daffc15 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -1383,6 +1383,102 @@ lpfc_dss_show(struct device *dev, struct device_attribute *attr, "" : "Not "); } +/** + * lpfc_sriov_hw_max_virtfn_show - Return maximum number of virtual functions + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains the formatted support level. + * + * Description: + * Returns the maximum number of virtual functions a physical function can + * support, 0 will be returned if called on virtual function. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_sriov_hw_max_virtfn_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata; + struct lpfc_hba *phba = vport->phba; + struct pci_dev *pdev = phba->pcidev; + union lpfc_sli4_cfg_shdr *shdr; + uint32_t shdr_status, shdr_add_status; + LPFC_MBOXQ_t *mboxq; + struct lpfc_mbx_get_prof_cfg *get_prof_cfg; + struct lpfc_rsrc_desc_pcie *desc; + uint32_t max_nr_virtfn; + uint32_t desc_count; + int length, rc, i; + + if ((phba->sli_rev < LPFC_SLI_REV4) || + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2)) + return -EPERM; + + if (!pdev->is_physfn) + return snprintf(buf, PAGE_SIZE, "%d\n", 0); + + mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mboxq) + return -ENOMEM; + + /* get the maximum number of virtfn support by physfn */ + length = (sizeof(struct lpfc_mbx_get_prof_cfg) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG, + length, LPFC_SLI4_MBX_EMBED); + shdr = (union lpfc_sli4_cfg_shdr *) + &mboxq->u.mqe.un.sli4_config.header.cfg_shdr; + bf_set(lpfc_mbox_hdr_pf_num, &shdr->request, + phba->sli4_hba.iov.pf_number + 1); + + get_prof_cfg = &mboxq->u.mqe.un.get_prof_cfg; + bf_set(lpfc_mbx_get_prof_cfg_prof_tp, &get_prof_cfg->u.request, + LPFC_CFG_TYPE_CURRENT_ACTIVE); + + rc = lpfc_sli_issue_mbox_wait(phba, mboxq, + lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG)); + + if (rc != MBX_TIMEOUT) { + /* check return status */ + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, + &shdr->response); + if (shdr_status || shdr_add_status || rc) + goto error_out; + + } else + goto error_out; + + desc_count = get_prof_cfg->u.response.prof_cfg.rsrc_desc_count; + + for (i = 0; i < LPFC_RSRC_DESC_MAX_NUM; i++) { + desc = (struct lpfc_rsrc_desc_pcie *) + &get_prof_cfg->u.response.prof_cfg.desc[i]; + if (LPFC_RSRC_DESC_TYPE_PCIE == + bf_get(lpfc_rsrc_desc_pcie_type, desc)) { + max_nr_virtfn = bf_get(lpfc_rsrc_desc_pcie_nr_virtfn, + desc); + break; + } + } + + if (i < LPFC_RSRC_DESC_MAX_NUM) { + if (rc != MBX_TIMEOUT) + mempool_free(mboxq, phba->mbox_mem_pool); + return snprintf(buf, PAGE_SIZE, "%d\n", max_nr_virtfn); + } + +error_out: + if (rc != MBX_TIMEOUT) + mempool_free(mboxq, phba->mbox_mem_pool); + return -EIO; +} + /** * lpfc_param_show - Return a cfg attribute value in decimal * @@ -1824,6 +1920,8 @@ static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL); static DEVICE_ATTR(lpfc_fips_level, S_IRUGO, lpfc_fips_level_show, NULL); static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL); static DEVICE_ATTR(lpfc_dss, S_IRUGO, lpfc_dss_show, NULL); +static DEVICE_ATTR(lpfc_sriov_hw_max_virtfn, S_IRUGO, + lpfc_sriov_hw_max_virtfn_show, NULL); static char *lpfc_soft_wwn_key = "C99G71SL8032A"; @@ -3076,7 +3174,7 @@ static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR, * * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: containing the string "selective". + * @buf: containing enable or disable aer flag. * @count: unused variable. * * Description: @@ -3160,7 +3258,7 @@ lpfc_param_show(aer_support) /** * lpfc_aer_support_init - Set the initial adapters aer support flag * @phba: lpfc_hba pointer. - * @val: link speed value. + * @val: enable aer or disable aer flag. * * Description: * If val is in a valid range [0,1], then set the adapter's initial @@ -3199,7 +3297,7 @@ static DEVICE_ATTR(lpfc_aer_support, S_IRUGO | S_IWUSR, * lpfc_aer_cleanup_state - Clean up aer state to the aer enabled device * @dev: class device that is converted into a Scsi_host. * @attr: device attribute, not used. - * @buf: containing the string "selective". + * @buf: containing flag 1 for aer cleanup state. * @count: unused variable. * * Description: @@ -3242,6 +3340,136 @@ lpfc_aer_cleanup_state(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR(lpfc_aer_state_cleanup, S_IWUSR, NULL, lpfc_aer_cleanup_state); +/** + * lpfc_sriov_nr_virtfn_store - Enable the adapter for sr-iov virtual functions + * + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: containing the string the number of vfs to be enabled. + * @count: unused variable. + * + * Description: + * When this api is called either through user sysfs, the driver shall + * try to enable or disable SR-IOV virtual functions according to the + * following: + * + * If zero virtual function has been enabled to the physical function, + * the driver shall invoke the pci enable virtual function api trying + * to enable the virtual functions. If the nr_vfn provided is greater + * than the maximum supported, the maximum virtual function number will + * be used for invoking the api; otherwise, the nr_vfn provided shall + * be used for invoking the api. If the api call returned success, the + * actual number of virtual functions enabled will be set to the driver + * cfg_sriov_nr_virtfn; otherwise, -EINVAL shall be returned and driver + * cfg_sriov_nr_virtfn remains zero. + * + * If none-zero virtual functions have already been enabled to the + * physical function, as reflected by the driver's cfg_sriov_nr_virtfn, + * -EINVAL will be returned and the driver does nothing; + * + * If the nr_vfn provided is zero and none-zero virtual functions have + * been enabled, as indicated by the driver's cfg_sriov_nr_virtfn, the + * disabling virtual function api shall be invoded to disable all the + * virtual functions and driver's cfg_sriov_nr_virtfn shall be set to + * zero. Otherwise, if zero virtual function has been enabled, do + * nothing. + * + * Returns: + * length of the buf on success if val is in range the intended mode + * is supported. + * -EINVAL if val out of range or intended mode is not supported. + **/ +static ssize_t +lpfc_sriov_nr_virtfn_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + struct pci_dev *pdev = phba->pcidev; + int val = 0, rc = -EINVAL; + + /* Sanity check on user data */ + if (!isdigit(buf[0])) + return -EINVAL; + if (sscanf(buf, "%i", &val) != 1) + return -EINVAL; + if (val < 0) + return -EINVAL; + + /* Request disabling virtual functions */ + if (val == 0) { + if (phba->cfg_sriov_nr_virtfn > 0) { + pci_disable_sriov(pdev); + phba->cfg_sriov_nr_virtfn = 0; + } + return strlen(buf); + } + + /* Request enabling virtual functions */ + if (phba->cfg_sriov_nr_virtfn > 0) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3018 There are %d virtual functions " + "enabled on physical function.\n", + phba->cfg_sriov_nr_virtfn); + return -EEXIST; + } + + if (val <= LPFC_MAX_VFN_PER_PFN) + phba->cfg_sriov_nr_virtfn = val; + else { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3019 Enabling %d virtual functions is not " + "allowed.\n", val); + return -EINVAL; + } + + rc = lpfc_sli_probe_sriov_nr_virtfn(phba, phba->cfg_sriov_nr_virtfn); + if (rc) { + phba->cfg_sriov_nr_virtfn = 0; + rc = -EPERM; + } else + rc = strlen(buf); + + return rc; +} + +static int lpfc_sriov_nr_virtfn = LPFC_DEF_VFN_PER_PFN; +module_param(lpfc_sriov_nr_virtfn, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(lpfc_sriov_nr_virtfn, "Enable PCIe device SR-IOV virtual fn"); +lpfc_param_show(sriov_nr_virtfn) + +/** + * lpfc_sriov_nr_virtfn_init - Set the initial sr-iov virtual function enable + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range [0,255], then set the adapter's initial + * cfg_sriov_nr_virtfn field. If it's greater than the maximum, the maximum + * number shall be used instead. It will be up to the driver's probe_one + * routine to determine whether the device's SR-IOV is supported or not. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_sriov_nr_virtfn_init(struct lpfc_hba *phba, int val) +{ + if (val >= 0 && val <= LPFC_MAX_VFN_PER_PFN) { + phba->cfg_sriov_nr_virtfn = val; + return 0; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3017 Enabling %d virtual functions is not " + "allowed.\n", val); + return -EINVAL; +} +static DEVICE_ATTR(lpfc_sriov_nr_virtfn, S_IRUGO | S_IWUSR, + lpfc_sriov_nr_virtfn_show, lpfc_sriov_nr_virtfn_store); + /* # lpfc_fcp_class: Determines FC class to use for the FCP protocol. # Value range is [2,3]. Default value is 3. @@ -3559,6 +3787,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_prot_sg_seg_cnt, &dev_attr_lpfc_aer_support, &dev_attr_lpfc_aer_state_cleanup, + &dev_attr_lpfc_sriov_nr_virtfn, &dev_attr_lpfc_suppress_link_up, &dev_attr_lpfc_iocb_cnt, &dev_attr_iocb_hw, @@ -3567,6 +3796,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_fips_level, &dev_attr_lpfc_fips_rev, &dev_attr_lpfc_dss, + &dev_attr_lpfc_sriov_hw_max_virtfn, NULL, }; @@ -4767,6 +4997,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_hba_queue_depth_init(phba, lpfc_hba_queue_depth); lpfc_hba_log_verbose_init(phba, lpfc_log_verbose); lpfc_aer_support_init(phba, lpfc_aer_support); + lpfc_sriov_nr_virtfn_init(phba, lpfc_sriov_nr_virtfn); lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up); lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt); phba->cfg_enable_dss = 1; diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index eb02016a21b5..3b9a6152b7f9 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -430,3 +430,5 @@ void lpfc_cleanup_wt_rrqs(struct lpfc_hba *); void lpfc_cleanup_vports_rrqs(struct lpfc_vport *, struct lpfc_nodelist *); struct lpfc_node_rrq *lpfc_get_active_rrq(struct lpfc_vport *, uint16_t, uint32_t); +/* functions to support SR-IOV */ +int lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *, int); diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index 6aa53aca23e9..bb3af9fabd7e 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -903,6 +903,8 @@ struct RRQ { /* Structure is in Big Endian format */ #define rrq_rxid_WORD rrq_exchg }; +#define LPFC_MAX_VFN_PER_PFN 255 /* Maximum VFs allowed per ARI */ +#define LPFC_DEF_VFN_PER_PFN 0 /* Default VFs due to platform limitation*/ struct RTV_RSP { /* Structure is in Big Endian format */ uint32_t ratov; diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index ca7c1dd61938..115915d4a60a 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -758,6 +758,12 @@ union lpfc_sli4_cfg_shdr { #define lpfc_mbox_hdr_version_SHIFT 0 #define lpfc_mbox_hdr_version_MASK 0x000000FF #define lpfc_mbox_hdr_version_WORD word9 +#define lpfc_mbox_hdr_pf_num_SHIFT 16 +#define lpfc_mbox_hdr_pf_num_MASK 0x000000FF +#define lpfc_mbox_hdr_pf_num_WORD word9 +#define lpfc_mbox_hdr_vh_num_SHIFT 24 +#define lpfc_mbox_hdr_vh_num_MASK 0x000000FF +#define lpfc_mbox_hdr_vh_num_WORD word9 #define LPFC_Q_CREATE_VERSION_2 2 #define LPFC_Q_CREATE_VERSION_1 1 #define LPFC_Q_CREATE_VERSION_0 0 @@ -813,6 +819,8 @@ struct mbox_header { #define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A #define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D #define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A +#define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0 +#define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4 #define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS 0xB5 /* FCoE Opcodes */ @@ -2217,6 +2225,145 @@ struct lpfc_mbx_get_sli4_parameters { struct lpfc_sli4_parameters sli4_parameters; }; +struct lpfc_rscr_desc_generic { +#define LPFC_RSRC_DESC_WSIZE 18 + uint32_t desc[LPFC_RSRC_DESC_WSIZE]; +}; + +struct lpfc_rsrc_desc_pcie { + uint32_t word0; +#define lpfc_rsrc_desc_pcie_type_SHIFT 0 +#define lpfc_rsrc_desc_pcie_type_MASK 0x000000ff +#define lpfc_rsrc_desc_pcie_type_WORD word0 +#define LPFC_RSRC_DESC_TYPE_PCIE 0x40 + uint32_t word1; +#define lpfc_rsrc_desc_pcie_pfnum_SHIFT 0 +#define lpfc_rsrc_desc_pcie_pfnum_MASK 0x000000ff +#define lpfc_rsrc_desc_pcie_pfnum_WORD word1 + uint32_t reserved; + uint32_t word3; +#define lpfc_rsrc_desc_pcie_sriov_sta_SHIFT 0 +#define lpfc_rsrc_desc_pcie_sriov_sta_MASK 0x000000ff +#define lpfc_rsrc_desc_pcie_sriov_sta_WORD word3 +#define lpfc_rsrc_desc_pcie_pf_sta_SHIFT 8 +#define lpfc_rsrc_desc_pcie_pf_sta_MASK 0x000000ff +#define lpfc_rsrc_desc_pcie_pf_sta_WORD word3 +#define lpfc_rsrc_desc_pcie_pf_type_SHIFT 16 +#define lpfc_rsrc_desc_pcie_pf_type_MASK 0x000000ff +#define lpfc_rsrc_desc_pcie_pf_type_WORD word3 + uint32_t word4; +#define lpfc_rsrc_desc_pcie_nr_virtfn_SHIFT 0 +#define lpfc_rsrc_desc_pcie_nr_virtfn_MASK 0x0000ffff +#define lpfc_rsrc_desc_pcie_nr_virtfn_WORD word4 +}; + +struct lpfc_rsrc_desc_fcfcoe { + uint32_t word0; +#define lpfc_rsrc_desc_fcfcoe_type_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_type_MASK 0x000000ff +#define lpfc_rsrc_desc_fcfcoe_type_WORD word0 +#define LPFC_RSRC_DESC_TYPE_FCFCOE 0x43 + uint32_t word1; +#define lpfc_rsrc_desc_fcfcoe_vfnum_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_vfnum_MASK 0x000000ff +#define lpfc_rsrc_desc_fcfcoe_vfnum_WORD word1 +#define lpfc_rsrc_desc_fcfcoe_pfnum_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_pfnum_MASK 0x000007ff +#define lpfc_rsrc_desc_fcfcoe_pfnum_WORD word1 + uint32_t word2; +#define lpfc_rsrc_desc_fcfcoe_rpi_cnt_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_rpi_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_rpi_cnt_WORD word2 +#define lpfc_rsrc_desc_fcfcoe_xri_cnt_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_xri_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_xri_cnt_WORD word2 + uint32_t word3; +#define lpfc_rsrc_desc_fcfcoe_wq_cnt_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_wq_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_wq_cnt_WORD word3 +#define lpfc_rsrc_desc_fcfcoe_rq_cnt_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_rq_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_rq_cnt_WORD word3 + uint32_t word4; +#define lpfc_rsrc_desc_fcfcoe_cq_cnt_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_cq_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_cq_cnt_WORD word4 +#define lpfc_rsrc_desc_fcfcoe_vpi_cnt_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_vpi_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_vpi_cnt_WORD word4 + uint32_t word5; +#define lpfc_rsrc_desc_fcfcoe_fcfi_cnt_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_fcfi_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_fcfi_cnt_WORD word5 +#define lpfc_rsrc_desc_fcfcoe_vfi_cnt_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_vfi_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_vfi_cnt_WORD word5 + uint32_t word6; + uint32_t word7; + uint32_t word8; + uint32_t word9; + uint32_t word10; + uint32_t word11; + uint32_t word12; + uint32_t word13; +#define lpfc_rsrc_desc_fcfcoe_lnk_nr_SHIFT 0 +#define lpfc_rsrc_desc_fcfcoe_lnk_nr_MASK 0x0000003f +#define lpfc_rsrc_desc_fcfcoe_lnk_nr_WORD word13 +#define lpfc_rsrc_desc_fcfcoe_lnk_tp_SHIFT 6 +#define lpfc_rsrc_desc_fcfcoe_lnk_tp_MASK 0x00000003 +#define lpfc_rsrc_desc_fcfcoe_lnk_tp_WORD word13 +#define lpfc_rsrc_desc_fcfcoe_lmc_SHIFT 8 +#define lpfc_rsrc_desc_fcfcoe_lmc_MASK 0x00000001 +#define lpfc_rsrc_desc_fcfcoe_lmc_WORD word13 +#define lpfc_rsrc_desc_fcfcoe_lld_SHIFT 9 +#define lpfc_rsrc_desc_fcfcoe_lld_MASK 0x00000001 +#define lpfc_rsrc_desc_fcfcoe_lld_WORD word13 +#define lpfc_rsrc_desc_fcfcoe_eq_cnt_SHIFT 16 +#define lpfc_rsrc_desc_fcfcoe_eq_cnt_MASK 0x0000ffff +#define lpfc_rsrc_desc_fcfcoe_eq_cnt_WORD word13 +}; + +struct lpfc_func_cfg { +#define LPFC_RSRC_DESC_MAX_NUM 2 + uint32_t rsrc_desc_count; + struct lpfc_rscr_desc_generic desc[LPFC_RSRC_DESC_MAX_NUM]; +}; + +struct lpfc_mbx_get_func_cfg { + struct mbox_header header; +#define LPFC_CFG_TYPE_PERSISTENT_OVERRIDE 0x0 +#define LPFC_CFG_TYPE_FACTURY_DEFAULT 0x1 +#define LPFC_CFG_TYPE_CURRENT_ACTIVE 0x2 + struct lpfc_func_cfg func_cfg; +}; + +struct lpfc_prof_cfg { +#define LPFC_RSRC_DESC_MAX_NUM 2 + uint32_t rsrc_desc_count; + struct lpfc_rscr_desc_generic desc[LPFC_RSRC_DESC_MAX_NUM]; +}; + +struct lpfc_mbx_get_prof_cfg { + struct mbox_header header; +#define LPFC_CFG_TYPE_PERSISTENT_OVERRIDE 0x0 +#define LPFC_CFG_TYPE_FACTURY_DEFAULT 0x1 +#define LPFC_CFG_TYPE_CURRENT_ACTIVE 0x2 + union { + struct { + uint32_t word10; +#define lpfc_mbx_get_prof_cfg_prof_id_SHIFT 0 +#define lpfc_mbx_get_prof_cfg_prof_id_MASK 0x000000ff +#define lpfc_mbx_get_prof_cfg_prof_id_WORD word10 +#define lpfc_mbx_get_prof_cfg_prof_tp_SHIFT 8 +#define lpfc_mbx_get_prof_cfg_prof_tp_MASK 0x00000003 +#define lpfc_mbx_get_prof_cfg_prof_tp_WORD word10 + } request; + struct { + struct lpfc_prof_cfg prof_cfg; + } response; + } u; +}; + /* Mailbox Completion Queue Error Messages */ #define MB_CQE_STATUS_SUCCESS 0x0 #define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES 0x1 @@ -2271,6 +2418,8 @@ struct lpfc_mqe { struct lpfc_mbx_supp_pages supp_pages; struct lpfc_mbx_pc_sli4_params sli4_params; struct lpfc_mbx_get_sli4_parameters get_sli4_parameters; + struct lpfc_mbx_get_func_cfg get_func_cfg; + struct lpfc_mbx_get_prof_cfg get_prof_cfg; struct lpfc_mbx_nop nop; } un; }; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 16b4da4530b1..e81912cd257e 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4033,6 +4033,36 @@ lpfc_reset_hba(struct lpfc_hba *phba) lpfc_unblock_mgmt_io(phba); } +/** + * lpfc_sli_probe_sriov_nr_virtfn - Enable a number of sr-iov virtual functions + * @phba: pointer to lpfc hba data structure. + * @nr_vfn: number of virtual functions to be enabled. + * + * This function enables the PCI SR-IOV virtual functions to a physical + * function. It invokes the PCI SR-IOV api with the @nr_vfn provided to + * enable the number of virtual functions to the physical function. As + * not all devices support SR-IOV, the return code from the pci_enable_sriov() + * API call does not considered as an error condition for most of the device. + **/ +int +lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *phba, int nr_vfn) +{ + struct pci_dev *pdev = phba->pcidev; + int rc; + + rc = pci_enable_sriov(pdev, nr_vfn); + if (rc) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "2806 Failed to enable sriov on this device " + "with vfn number nr_vf:%d, rc:%d\n", + nr_vfn, rc); + } else + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "2807 Successful enable sriov on this device " + "with vfn number nr_vf:%d\n", nr_vfn); + return rc; +} + /** * lpfc_sli_driver_resource_setup - Setup driver internal resources for SLI3 dev. * @phba: pointer to lpfc hba data structure. @@ -4048,6 +4078,7 @@ static int lpfc_sli_driver_resource_setup(struct lpfc_hba *phba) { struct lpfc_sli *psli; + int rc; /* * Initialize timers used by driver @@ -4122,6 +4153,23 @@ lpfc_sli_driver_resource_setup(struct lpfc_hba *phba) if (lpfc_mem_alloc(phba, BPL_ALIGN_SZ)) return -ENOMEM; + /* + * Enable sr-iov virtual functions if supported and configured + * through the module parameter. + */ + if (phba->cfg_sriov_nr_virtfn > 0) { + rc = lpfc_sli_probe_sriov_nr_virtfn(phba, + phba->cfg_sriov_nr_virtfn); + if (rc) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "2808 Requested number of SR-IOV " + "virtual functions (%d) is not " + "supported\n", + phba->cfg_sriov_nr_virtfn); + phba->cfg_sriov_nr_virtfn = 0; + } + } + return 0; } @@ -4427,6 +4475,23 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) goto out_free_fcp_eq_hdl; } + /* + * Enable sr-iov virtual functions if supported and configured + * through the module parameter. + */ + if (phba->cfg_sriov_nr_virtfn > 0) { + rc = lpfc_sli_probe_sriov_nr_virtfn(phba, + phba->cfg_sriov_nr_virtfn); + if (rc) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "3020 Requested number of SR-IOV " + "virtual functions (%d) is not " + "supported\n", + phba->cfg_sriov_nr_virtfn); + phba->cfg_sriov_nr_virtfn = 0; + } + } + return rc; out_free_fcp_eq_hdl: @@ -5780,7 +5845,12 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) { LPFC_MBOXQ_t *pmb; struct lpfc_mbx_read_config *rd_config; - uint32_t rc = 0; + union lpfc_sli4_cfg_shdr *shdr; + uint32_t shdr_status, shdr_add_status; + struct lpfc_mbx_get_func_cfg *get_func_cfg; + struct lpfc_rsrc_desc_fcfcoe *desc; + uint32_t desc_count; + int length, i, rc = 0; pmb = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmb) { @@ -5855,7 +5925,9 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) phba->sli4_hba.max_cfg_param.fcfi_base, phba->sli4_hba.max_cfg_param.max_fcfi); } - mempool_free(pmb, phba->mbox_mem_pool); + + if (rc) + goto read_cfg_out; /* Reset the DFT_HBA_Q_DEPTH to the max xri */ if (phba->cfg_hba_queue_depth > @@ -5864,6 +5936,65 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) phba->cfg_hba_queue_depth = phba->sli4_hba.max_cfg_param.max_xri - lpfc_sli4_get_els_iocb_cnt(phba); + + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) + goto read_cfg_out; + + /* get the pf# and vf# for SLI4 if_type 2 port */ + length = (sizeof(struct lpfc_mbx_get_func_cfg) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, pmb, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG, + length, LPFC_SLI4_MBX_EMBED); + + rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); + shdr = (union lpfc_sli4_cfg_shdr *) + &pmb->u.mqe.un.sli4_config.header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (rc || shdr_status || shdr_add_status) { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3026 Mailbox failed , mbxCmd x%x " + "GET_FUNCTION_CONFIG, mbxStatus x%x\n", + bf_get(lpfc_mqe_command, &pmb->u.mqe), + bf_get(lpfc_mqe_status, &pmb->u.mqe)); + rc = -EIO; + goto read_cfg_out; + } + + /* search for fc_fcoe resrouce descriptor */ + get_func_cfg = &pmb->u.mqe.un.get_func_cfg; + desc_count = get_func_cfg->func_cfg.rsrc_desc_count; + + for (i = 0; i < LPFC_RSRC_DESC_MAX_NUM; i++) { + desc = (struct lpfc_rsrc_desc_fcfcoe *) + &get_func_cfg->func_cfg.desc[i]; + if (LPFC_RSRC_DESC_TYPE_FCFCOE == + bf_get(lpfc_rsrc_desc_pcie_type, desc)) { + phba->sli4_hba.iov.pf_number = + bf_get(lpfc_rsrc_desc_fcfcoe_pfnum, desc); + phba->sli4_hba.iov.vf_number = + bf_get(lpfc_rsrc_desc_fcfcoe_vfnum, desc); + break; + } + } + + if (i < LPFC_RSRC_DESC_MAX_NUM) + lpfc_printf_log(phba, KERN_INFO, LOG_SLI, + "3027 GET_FUNCTION_CONFIG: pf_number:%d, " + "vf_number:%d\n", phba->sli4_hba.iov.pf_number, + phba->sli4_hba.iov.vf_number); + else { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "3028 GET_FUNCTION_CONFIG: failed to find " + "Resrouce Descriptor:x%x\n", + LPFC_RSRC_DESC_TYPE_FCFCOE); + rc = -EIO; + } + +read_cfg_out: + mempool_free(pmb, phba->mbox_mem_pool); return rc; } @@ -7825,6 +7956,7 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba) { int wait_cnt = 0; LPFC_MBOXQ_t *mboxq; + struct pci_dev *pdev = phba->pcidev; lpfc_stop_hba_timers(phba); phba->sli4_hba.intr_enable = 0; @@ -7864,6 +7996,10 @@ lpfc_sli4_hba_unset(struct lpfc_hba *phba) /* Disable PCI subsystem interrupt */ lpfc_sli4_disable_intr(phba); + /* Disable SR-IOV if enabled */ + if (phba->cfg_sriov_nr_virtfn) + pci_disable_sriov(pdev); + /* Stop kthread signal shall trigger work_done one more time */ kthread_stop(phba->worker_thread); @@ -8243,6 +8379,10 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev) lpfc_debugfs_terminate(vport); + /* Disable SR-IOV if enabled */ + if (phba->cfg_sriov_nr_virtfn) + pci_disable_sriov(pdev); + /* Disable interrupt */ lpfc_sli_disable_intr(phba); diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 1a3cbf88f2ce..03d25a9d3bf6 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -365,6 +365,11 @@ struct lpfc_pc_sli4_params { uint8_t rqv; }; +struct lpfc_iov { + uint32_t pf_number; + uint32_t vf_number; +}; + /* SLI4 HBA data structure entries */ struct lpfc_sli4_hba { void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for @@ -467,6 +472,7 @@ struct lpfc_sli4_hba { struct list_head sp_els_xri_aborted_work_queue; struct list_head sp_unsol_work_queue; struct lpfc_sli4_link link_state; + struct lpfc_iov iov; spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */ spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */ }; -- cgit v1.2.3 From 52d5244096017bbd11164479116baceaede342b0 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 24 May 2011 11:42:45 -0400 Subject: [SCSI] lpfc 8.3.24: Add request-firmware support Add request-firmware support: - Add support for request_firmware interface for INTF2 SLI4 ports. - Add ability to reset SLI4 INTF2 ports. Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc_attr.c | 33 +++++++++----- drivers/scsi/lpfc/lpfc_crtn.h | 1 + drivers/scsi/lpfc/lpfc_hw4.h | 44 ++++++++++++++++++ drivers/scsi/lpfc/lpfc_init.c | 102 ++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/lpfc/lpfc_sli.c | 90 +++++++++++++++++++++++++++++++++++++ 5 files changed, 259 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 6ecd6daffc15..135a53baa735 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -755,18 +755,18 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr, } /** - * lpfc_sli4_fw_dump_request - Request firmware to perform a firmware dump + * lpfc_sli4_pdev_reg_request - Request physical dev to perform a register acc * @phba: lpfc_hba pointer. * * Description: - * Request SLI4 interface type-2 device to perform a dump of firmware dump - * object into it's /dbg directory of the flash file system. + * Request SLI4 interface type-2 device to perform a physical register set + * access. * * Returns: * zero for success **/ static ssize_t -lpfc_sli4_fw_dump_request(struct lpfc_hba *phba) +lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) { struct completion online_compl; uint32_t reg_val; @@ -776,6 +776,11 @@ lpfc_sli4_fw_dump_request(struct lpfc_hba *phba) if (!phba->cfg_enable_hba_reset) return -EIO; + if ((phba->sli_rev < LPFC_SLI_REV4) || + (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2)) + return -EPERM; + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); if (status != 0) @@ -786,7 +791,14 @@ lpfc_sli4_fw_dump_request(struct lpfc_hba *phba) reg_val = readl(phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); - reg_val |= LPFC_FW_DUMP_REQUEST; + + if (opcode == LPFC_FW_DUMP) + reg_val |= LPFC_FW_DUMP_REQUEST; + else if (opcode == LPFC_FW_RESET) + reg_val |= LPFC_CTL_PDEV_CTL_FRST; + else if (opcode == LPFC_DV_RESET) + reg_val |= LPFC_CTL_PDEV_CTL_DRST; + writel(reg_val, phba->sli4_hba.conf_regs_memmap_p + LPFC_CTL_PDEV_CTL_OFFSET); /* flush */ @@ -904,12 +916,11 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr, else status = lpfc_do_offline(phba, LPFC_EVT_KILL); else if (strncmp(buf, "dump", sizeof("dump") - 1) == 0) - if ((phba->sli_rev < LPFC_SLI_REV4) || - (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != - LPFC_SLI_INTF_IF_TYPE_2)) - return -EPERM; - else - status = lpfc_sli4_fw_dump_request(phba); + status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_DUMP); + else if (strncmp(buf, "fw_reset", sizeof("fw_reset") - 1) == 0) + status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET); + else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0) + status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET); else return -EINVAL; diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 3b9a6152b7f9..0b63cb2610d0 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -430,5 +430,6 @@ void lpfc_cleanup_wt_rrqs(struct lpfc_hba *); void lpfc_cleanup_vports_rrqs(struct lpfc_vport *, struct lpfc_nodelist *); struct lpfc_node_rrq *lpfc_get_active_rrq(struct lpfc_vport *, uint16_t, uint32_t); +int lpfc_wr_object(struct lpfc_hba *, struct list_head *, uint32_t, uint32_t *); /* functions to support SR-IOV */ int lpfc_sli_probe_sriov_nr_virtfn(struct lpfc_hba *, int); diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 115915d4a60a..61a40fd1ad18 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -821,6 +821,7 @@ struct mbox_header { #define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A #define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0 #define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4 +#define LPFC_MBOX_OPCODE_WRITE_OBJECT 0xAC #define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS 0xB5 /* FCoE Opcodes */ @@ -2372,6 +2373,29 @@ struct lpfc_mbx_get_prof_cfg { #define MB_CEQ_STATUS_QUEUE_FLUSHING 0x4 #define MB_CQE_STATUS_DMA_FAILED 0x5 +#define LPFC_MBX_WR_CONFIG_MAX_BDE 8 +struct lpfc_mbx_wr_object { + struct mbox_header header; + union { + struct { + uint32_t word4; +#define lpfc_wr_object_eof_SHIFT 31 +#define lpfc_wr_object_eof_MASK 0x00000001 +#define lpfc_wr_object_eof_WORD word4 +#define lpfc_wr_object_write_length_SHIFT 0 +#define lpfc_wr_object_write_length_MASK 0x00FFFFFF +#define lpfc_wr_object_write_length_WORD word4 + uint32_t write_offset; + uint32_t object_name[26]; + uint32_t bde_count; + struct ulp_bde64 bde[LPFC_MBX_WR_CONFIG_MAX_BDE]; + } request; + struct { + uint32_t actual_write_length; + } response; + } u; +}; + /* mailbox queue entry structure */ struct lpfc_mqe { uint32_t word0; @@ -2421,6 +2445,7 @@ struct lpfc_mqe { struct lpfc_mbx_get_func_cfg get_func_cfg; struct lpfc_mbx_get_prof_cfg get_prof_cfg; struct lpfc_mbx_nop nop; + struct lpfc_mbx_wr_object wr_object; } un; }; @@ -2966,9 +2991,28 @@ union lpfc_wqe { struct gen_req64_wqe gen_req; }; +#define LPFC_GROUP_OJECT_MAGIC_NUM 0xfeaa0001 +#define LPFC_FILE_TYPE_GROUP 0xf7 +#define LPFC_FILE_ID_GROUP 0xa2 +struct lpfc_grp_hdr { + uint32_t size; + uint32_t magic_number; + uint32_t word2; +#define lpfc_grp_hdr_file_type_SHIFT 24 +#define lpfc_grp_hdr_file_type_MASK 0x000000FF +#define lpfc_grp_hdr_file_type_WORD word2 +#define lpfc_grp_hdr_id_SHIFT 16 +#define lpfc_grp_hdr_id_MASK 0x000000FF +#define lpfc_grp_hdr_id_WORD word2 + uint8_t rev_name[128]; +}; + #define FCP_COMMAND 0x0 #define FCP_COMMAND_DATA_OUT 0x1 #define ELS_COMMAND_NON_FIP 0xC #define ELS_COMMAND_FIP 0xD #define OTHER_COMMAND 0x8 +#define LPFC_FW_DUMP 1 +#define LPFC_FW_RESET 2 +#define LPFC_DV_RESET 3 diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index e81912cd257e..2b535cff4b2a 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -8774,6 +8775,97 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba) return 0; } +/** + * lpfc_write_firmware - attempt to write a firmware image to the port + * @phba: pointer to lpfc hba data structure. + * @fw: pointer to firmware image returned from request_firmware. + * + * returns the number of bytes written if write is successful. + * returns a negative error value if there were errors. + * returns 0 if firmware matches currently active firmware on port. + **/ +int +lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw) +{ + char fwrev[32]; + struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data; + struct list_head dma_buffer_list; + int i, rc = 0; + struct lpfc_dmabuf *dmabuf, *next; + uint32_t offset = 0, temp_offset = 0; + + INIT_LIST_HEAD(&dma_buffer_list); + if ((image->magic_number != LPFC_GROUP_OJECT_MAGIC_NUM) || + (bf_get(lpfc_grp_hdr_file_type, image) != LPFC_FILE_TYPE_GROUP) || + (bf_get(lpfc_grp_hdr_id, image) != LPFC_FILE_ID_GROUP) || + (image->size != fw->size)) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3022 Invalid FW image found. " + "Magic:%d Type:%x ID:%x\n", + image->magic_number, + bf_get(lpfc_grp_hdr_file_type, image), + bf_get(lpfc_grp_hdr_id, image)); + return -EINVAL; + } + lpfc_decode_firmware_rev(phba, fwrev, 1); + if (strncmp(fwrev, image->rev_name, strnlen(fwrev, 16))) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3023 Updating Firmware. Current Version:%s " + "New Version:%s\n", + fwrev, image->rev_name); + for (i = 0; i < LPFC_MBX_WR_CONFIG_MAX_BDE; i++) { + dmabuf = kzalloc(sizeof(struct lpfc_dmabuf), + GFP_KERNEL); + if (!dmabuf) { + rc = -ENOMEM; + goto out; + } + dmabuf->virt = dma_alloc_coherent(&phba->pcidev->dev, + SLI4_PAGE_SIZE, + &dmabuf->phys, + GFP_KERNEL); + if (!dmabuf->virt) { + kfree(dmabuf); + rc = -ENOMEM; + goto out; + } + list_add_tail(&dmabuf->list, &dma_buffer_list); + } + while (offset < fw->size) { + temp_offset = offset; + list_for_each_entry(dmabuf, &dma_buffer_list, list) { + if (offset + SLI4_PAGE_SIZE > fw->size) { + temp_offset += fw->size - offset; + memcpy(dmabuf->virt, + fw->data + temp_offset, + fw->size - offset); + break; + } + temp_offset += SLI4_PAGE_SIZE; + memcpy(dmabuf->virt, fw->data + temp_offset, + SLI4_PAGE_SIZE); + } + rc = lpfc_wr_object(phba, &dma_buffer_list, + (fw->size - offset), &offset); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3024 Firmware update failed. " + "%d\n", rc); + goto out; + } + } + rc = offset; + } +out: + list_for_each_entry_safe(dmabuf, next, &dma_buffer_list, list) { + list_del(&dmabuf->list); + dma_free_coherent(&phba->pcidev->dev, SLI4_PAGE_SIZE, + dmabuf->virt, dmabuf->phys); + kfree(dmabuf); + } + return rc; +} + /** * lpfc_pci_probe_one_s4 - PCI probe func to reg SLI-4 device to PCI subsys * @pdev: pointer to PCI device @@ -8803,6 +8895,8 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) int mcnt; int adjusted_fcp_eq_count; int fcp_qidx; + const struct firmware *fw; + uint8_t file_name[16]; /* Allocate memory for HBA structure */ phba = lpfc_hba_alloc(pdev); @@ -8957,6 +9051,14 @@ lpfc_pci_probe_one_s4(struct pci_dev *pdev, const struct pci_device_id *pid) /* Perform post initialization setup */ lpfc_post_init_setup(phba); + /* check for firmware upgrade or downgrade */ + snprintf(file_name, 16, "%s.grp", phba->ModelName); + error = request_firmware(&fw, file_name, &phba->pcidev->dev); + if (!error) { + lpfc_write_firmware(phba, fw); + release_firmware(fw); + } + /* Check if there are static vports to be created. */ lpfc_create_static_vport(phba); diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index dd911d6d0ee5..fcfa8c8cfb67 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -13499,6 +13499,96 @@ out: return; } +/** + * lpfc_wr_object - write an object to the firmware + * @phba: HBA structure that indicates port to create a queue on. + * @dmabuf_list: list of dmabufs to write to the port. + * @size: the total byte value of the objects to write to the port. + * @offset: the current offset to be used to start the transfer. + * + * This routine will create a wr_object mailbox command to send to the port. + * the mailbox command will be constructed using the dma buffers described in + * @dmabuf_list to create a list of BDEs. This routine will fill in as many + * BDEs that the imbedded mailbox can support. The @offset variable will be + * used to indicate the starting offset of the transfer and will also return + * the offset after the write object mailbox has completed. @size is used to + * determine the end of the object and whether the eof bit should be set. + * + * Return 0 is successful and offset will contain the the new offset to use + * for the next write. + * Return negative value for error cases. + **/ +int +lpfc_wr_object(struct lpfc_hba *phba, struct list_head *dmabuf_list, + uint32_t size, uint32_t *offset) +{ + struct lpfc_mbx_wr_object *wr_object; + LPFC_MBOXQ_t *mbox; + int rc = 0, i = 0; + uint32_t shdr_status, shdr_add_status; + uint32_t mbox_tmo; + union lpfc_sli4_cfg_shdr *shdr; + struct lpfc_dmabuf *dmabuf; + uint32_t written = 0; + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_WRITE_OBJECT, + sizeof(struct lpfc_mbx_wr_object) - + sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED); + + wr_object = (struct lpfc_mbx_wr_object *)&mbox->u.mqe.un.wr_object; + wr_object->u.request.write_offset = *offset; + sprintf((uint8_t *)wr_object->u.request.object_name, "/"); + wr_object->u.request.object_name[0] = + cpu_to_le32(wr_object->u.request.object_name[0]); + bf_set(lpfc_wr_object_eof, &wr_object->u.request, 0); + list_for_each_entry(dmabuf, dmabuf_list, list) { + if (i >= LPFC_MBX_WR_CONFIG_MAX_BDE || written >= size) + break; + wr_object->u.request.bde[i].addrLow = putPaddrLow(dmabuf->phys); + wr_object->u.request.bde[i].addrHigh = + putPaddrHigh(dmabuf->phys); + if (written + SLI4_PAGE_SIZE >= size) { + wr_object->u.request.bde[i].tus.f.bdeSize = + (size - written); + written += (size - written); + bf_set(lpfc_wr_object_eof, &wr_object->u.request, 1); + } else { + wr_object->u.request.bde[i].tus.f.bdeSize = + SLI4_PAGE_SIZE; + written += SLI4_PAGE_SIZE; + } + i++; + } + wr_object->u.request.bde_count = i; + bf_set(lpfc_wr_object_write_length, &wr_object->u.request, written); + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + /* The IOCTL status is embedded in the mailbox subheader. */ + shdr = (union lpfc_sli4_cfg_shdr *) &wr_object->header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (rc != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3025 Write Object mailbox failed with " + "status x%x add_status x%x, mbx status x%x\n", + shdr_status, shdr_add_status, rc); + rc = -ENXIO; + } else + *offset += wr_object->u.response.actual_write_length; + return rc; +} + /** * lpfc_cleanup_pending_mbox - Free up vport discovery mailbox commands. * @vport: pointer to vport data structure. -- cgit v1.2.3 From 6d368e532168cb621731b3936945cd910cb25bd0 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 24 May 2011 11:44:12 -0400 Subject: [SCSI] lpfc 8.3.24: Add resource extent support This patch adds support for hardware that returns resource ids via extents rather than contiguous ranges. [jejb: checkpatch.pl fixes] Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 3 + drivers/scsi/lpfc/lpfc_bsg.c | 6 + drivers/scsi/lpfc/lpfc_crtn.h | 6 + drivers/scsi/lpfc/lpfc_ct.c | 2 + drivers/scsi/lpfc/lpfc_els.c | 28 +- drivers/scsi/lpfc/lpfc_hbadisc.c | 32 +- drivers/scsi/lpfc/lpfc_hw.h | 2 + drivers/scsi/lpfc/lpfc_hw4.h | 205 +++-- drivers/scsi/lpfc/lpfc_init.c | 127 ++- drivers/scsi/lpfc/lpfc_mbox.c | 166 +++- drivers/scsi/lpfc/lpfc_mem.c | 13 - drivers/scsi/lpfc/lpfc_nportdisc.c | 17 +- drivers/scsi/lpfc/lpfc_scsi.c | 53 +- drivers/scsi/lpfc/lpfc_sli.c | 1523 +++++++++++++++++++++++++++++++++--- drivers/scsi/lpfc/lpfc_sli.h | 1 + drivers/scsi/lpfc/lpfc_sli4.h | 27 +- drivers/scsi/lpfc/lpfc_vport.c | 2 +- 17 files changed, 1937 insertions(+), 276 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 9d0bfba5461e..dfd9ace862e7 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -780,6 +780,9 @@ struct lpfc_hba { uint16_t vpi_base; uint16_t vfi_base; unsigned long *vpi_bmask; /* vpi allocation table */ + uint16_t *vpi_ids; + uint16_t vpi_count; + struct list_head lpfc_vpi_blk_list; /* Data structure used by fabric iocb scheduler */ struct list_head fabric_iocb_list; diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 853e5042f39c..080187b0e701 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -332,6 +332,8 @@ lpfc_bsg_send_mgmt_cmd(struct fc_bsg_job *job) cmd->ulpLe = 1; cmd->ulpClass = CLASS3; cmd->ulpContext = ndlp->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + cmd->ulpContext = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; cmd->ulpOwner = OWN_CHIP; cmdiocbq->vport = phba->pport; cmdiocbq->context3 = bmp; @@ -1336,6 +1338,10 @@ lpfc_issue_ct_rsp(struct lpfc_hba *phba, struct fc_bsg_job *job, uint32_t tag, } icmd->un.ulpWord[3] = ndlp->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + icmd->ulpContext = + phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; + /* The exchange is done, mark the entry as invalid */ phba->ct_ctx[tag].flags &= ~UNSOL_VALID; } else diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h index 0b63cb2610d0..fc20c247f36b 100644 --- a/drivers/scsi/lpfc/lpfc_crtn.h +++ b/drivers/scsi/lpfc/lpfc_crtn.h @@ -55,6 +55,8 @@ void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *); void lpfc_supported_pages(struct lpfcMboxq *); void lpfc_pc_sli4_params(struct lpfcMboxq *); int lpfc_pc_sli4_params_get(struct lpfc_hba *, LPFC_MBOXQ_t *); +int lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *, struct lpfcMboxq *, + uint16_t, uint16_t, bool); int lpfc_get_sli4_parameters(struct lpfc_hba *, LPFC_MBOXQ_t *); struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t); void lpfc_cleanup_rcv_buffers(struct lpfc_vport *); @@ -366,6 +368,10 @@ extern void lpfc_debugfs_slow_ring_trc(struct lpfc_hba *, char *, uint32_t, uint32_t, uint32_t); extern struct lpfc_hbq_init *lpfc_hbq_defs[]; +/* SLI4 if_type 2 externs. */ +int lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *); +int lpfc_sli4_dealloc_resource_identifiers(struct lpfc_hba *); + /* externs BlockGuard */ extern char *_dump_buf_data; extern unsigned long _dump_buf_data_order; diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c index d9edfd90d7ff..779b88e1469d 100644 --- a/drivers/scsi/lpfc/lpfc_ct.c +++ b/drivers/scsi/lpfc/lpfc_ct.c @@ -352,6 +352,8 @@ lpfc_gen_req(struct lpfc_vport *vport, struct lpfc_dmabuf *bmp, icmd->ulpLe = 1; icmd->ulpClass = CLASS3; icmd->ulpContext = ndlp->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + icmd->ulpContext = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) { /* For GEN_REQUEST64_CR, use the RPI */ diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index e2c452467c8b..32a084534f3e 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -250,7 +250,7 @@ lpfc_prep_els_iocb(struct lpfc_vport *vport, uint8_t expectRsp, icmd->un.elsreq64.myID = vport->fc_myDID; /* For ELS_REQUEST64_CR, use the VPI by default */ - icmd->ulpContext = vport->vpi + phba->vpi_base; + icmd->ulpContext = phba->vpi_ids[vport->vpi]; icmd->ulpCt_h = 0; /* The CT field must be 0=INVALID_RPI for the ECHO cmd */ if (elscmd == ELS_CMD_ECHO) @@ -454,6 +454,7 @@ lpfc_issue_reg_vfi(struct lpfc_vport *vport) rc = -ENOMEM; goto fail_free_dmabuf; } + mboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mboxq) { rc = -ENOMEM; @@ -6585,6 +6586,26 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi) { struct lpfc_vport *vport; unsigned long flags; + int i; + + /* The physical ports are always vpi 0 - translate is unnecessary. */ + if (vpi > 0) { + /* + * Translate the physical vpi to the logical vpi. The + * vport stores the logical vpi. + */ + for (i = 0; i < phba->max_vpi; i++) { + if (vpi == phba->vpi_ids[i]) + break; + } + + if (i >= phba->max_vpi) { + lpfc_printf_log(phba, KERN_ERR, LOG_ELS, + "2936 Could not find Vport mapped " + "to vpi %d\n", vpi); + return NULL; + } + } spin_lock_irqsave(&phba->hbalock, flags); list_for_each_entry(vport, &phba->port_list, listentry) { @@ -6641,8 +6662,9 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, vport = phba->pport; else vport = lpfc_find_vport_by_vpid(phba, - icmd->unsli3.rcvsli3.vpi - phba->vpi_base); + icmd->unsli3.rcvsli3.vpi); } + /* If there are no BDEs associated * with this IOCB, there is nothing to do. */ @@ -7222,7 +7244,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp, elsiocb->iocb.ulpCt_h = (SLI4_CT_VPI >> 1) & 1; elsiocb->iocb.ulpCt_l = SLI4_CT_VPI & 1 ; /* Set the ulpContext to the vpi */ - elsiocb->iocb.ulpContext = vport->vpi + phba->vpi_base; + elsiocb->iocb.ulpContext = phba->vpi_ids[vport->vpi]; } else { /* For FDISC, Let FDISC rsp set the NPortID for this VPI */ icmd->ulpCt_h = 1; diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index 2653c844d20d..18d0dbfda2bc 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -881,7 +881,7 @@ lpfc_linkdown(struct lpfc_hba *phba) /* Clean up any firmware default rpi's */ mb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mb) { - lpfc_unreg_did(phba, 0xffff, 0xffffffff, mb); + lpfc_unreg_did(phba, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS, mb); mb->vport = vport; mb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; if (lpfc_sli_issue_mbox(phba, mb, MBX_NOWAIT) @@ -3421,7 +3421,8 @@ lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) return; } - ndlp->nlp_rpi = mb->un.varWords[0]; + if (phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; ndlp->nlp_flag |= NLP_RPI_REGISTERED; ndlp->nlp_type |= NLP_FABRIC; lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); @@ -3495,7 +3496,8 @@ out: return; } - ndlp->nlp_rpi = mb->un.varWords[0]; + if (phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; ndlp->nlp_flag |= NLP_RPI_REGISTERED; ndlp->nlp_type |= NLP_FABRIC; lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); @@ -3582,7 +3584,6 @@ lpfc_register_remote_port(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) if (ndlp->nlp_type & NLP_FCP_INITIATOR) rport_ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR; - if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN) fc_remote_port_rolechg(rport, rport_ids.roles); @@ -4097,11 +4098,16 @@ lpfc_unreg_rpi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) struct lpfc_hba *phba = vport->phba; LPFC_MBOXQ_t *mbox; int rc; + uint16_t rpi; if (ndlp->nlp_flag & NLP_RPI_REGISTERED) { mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mbox) { - lpfc_unreg_login(phba, vport->vpi, ndlp->nlp_rpi, mbox); + /* SLI4 ports require the physical rpi value. */ + rpi = ndlp->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + rpi = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; + lpfc_unreg_login(phba, vport->vpi, rpi, mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; rc = lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT); @@ -4170,7 +4176,8 @@ lpfc_unreg_all_rpis(struct lpfc_vport *vport) mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mbox) { - lpfc_unreg_login(phba, vport->vpi, 0xffff, mbox); + lpfc_unreg_login(phba, vport->vpi, LPFC_UNREG_ALL_RPIS_VPORT, + mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; @@ -4194,7 +4201,8 @@ lpfc_unreg_default_rpis(struct lpfc_vport *vport) mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mbox) { - lpfc_unreg_did(phba, vport->vpi, 0xffffffff, mbox); + lpfc_unreg_did(phba, vport->vpi, LPFC_UNREG_ALL_DFLT_RPIS, + mbox); mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; @@ -4644,10 +4652,7 @@ lpfc_disc_start(struct lpfc_vport *vport) if (num_sent) return; - /* - * For SLI3, cmpl_reg_vpi will set port_state to READY, and - * continue discovery. - */ + /* Register the VPI for SLI3, NON-NPIV only. */ if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) && !(vport->fc_flag & FC_PT2PT) && !(vport->fc_flag & FC_RSCN_MODE) && @@ -4934,7 +4939,7 @@ restart_disc: if (phba->sli_rev < LPFC_SLI_REV4) { if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) lpfc_issue_reg_vpi(phba, vport); - else { /* NPIV Not enabled */ + else { lpfc_issue_clear_la(phba, vport); vport->port_state = LPFC_VPORT_READY; } @@ -5060,7 +5065,8 @@ lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) pmb->context1 = NULL; pmb->context2 = NULL; - ndlp->nlp_rpi = mb->un.varWords[0]; + if (phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; ndlp->nlp_flag |= NLP_RPI_REGISTERED; ndlp->nlp_type |= NLP_FABRIC; lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNMAPPED_NODE); diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h index bb3af9fabd7e..9059524cf225 100644 --- a/drivers/scsi/lpfc/lpfc_hw.h +++ b/drivers/scsi/lpfc/lpfc_hw.h @@ -64,6 +64,8 @@ #define SLI3_IOCB_CMD_SIZE 128 #define SLI3_IOCB_RSP_SIZE 64 +#define LPFC_UNREG_ALL_RPIS_VPORT 0xffff +#define LPFC_UNREG_ALL_DFLT_RPIS 0xffffffff /* vendor ID used in SCSI netlink calls */ #define LPFC_NL_VENDOR_ID (SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_EMULEX) diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index 61a40fd1ad18..f14db2d17f29 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -229,9 +229,26 @@ struct ulp_bde64 { struct lpfc_sli4_flags { uint32_t word0; -#define lpfc_fip_flag_SHIFT 0 -#define lpfc_fip_flag_MASK 0x00000001 -#define lpfc_fip_flag_WORD word0 +#define lpfc_idx_rsrc_rdy_SHIFT 0 +#define lpfc_idx_rsrc_rdy_MASK 0x00000001 +#define lpfc_idx_rsrc_rdy_WORD word0 +#define LPFC_IDX_RSRC_RDY 1 +#define lpfc_xri_rsrc_rdy_SHIFT 1 +#define lpfc_xri_rsrc_rdy_MASK 0x00000001 +#define lpfc_xri_rsrc_rdy_WORD word0 +#define LPFC_XRI_RSRC_RDY 1 +#define lpfc_rpi_rsrc_rdy_SHIFT 2 +#define lpfc_rpi_rsrc_rdy_MASK 0x00000001 +#define lpfc_rpi_rsrc_rdy_WORD word0 +#define LPFC_RPI_RSRC_RDY 1 +#define lpfc_vpi_rsrc_rdy_SHIFT 3 +#define lpfc_vpi_rsrc_rdy_MASK 0x00000001 +#define lpfc_vpi_rsrc_rdy_WORD word0 +#define LPFC_VPI_RSRC_RDY 1 +#define lpfc_vfi_rsrc_rdy_SHIFT 4 +#define lpfc_vfi_rsrc_rdy_MASK 0x00000001 +#define lpfc_vfi_rsrc_rdy_WORD word0 +#define LPFC_VFI_RSRC_RDY 1 }; struct sli4_bls_rsp { @@ -791,12 +808,22 @@ union lpfc_sli4_cfg_shdr { } response; }; -/* Mailbox structures */ +/* Mailbox Header structures. + * struct mbox_header is defined for first generation SLI4_CFG mailbox + * calls deployed for BE-based ports. + * + * struct sli4_mbox_header is defined for second generation SLI4 + * ports that don't deploy the SLI4_CFG mechanism. + */ struct mbox_header { struct lpfc_sli4_cfg_mhdr cfg_mhdr; union lpfc_sli4_cfg_shdr cfg_shdr; }; +#define LPFC_EXTENT_LOCAL 0 +#define LPFC_TIMEOUT_DEFAULT 0 +#define LPFC_EXTENT_VERSION_DEFAULT 0 + /* Subsystem Definitions */ #define LPFC_MBOX_SUBSYSTEM_COMMON 0x1 #define LPFC_MBOX_SUBSYSTEM_FCOE 0xC @@ -819,6 +846,10 @@ struct mbox_header { #define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A #define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D #define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A +#define LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO 0x9A +#define LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT 0x9B +#define LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT 0x9C +#define LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT 0x9D #define LPFC_MBOX_OPCODE_GET_FUNCTION_CONFIG 0xA0 #define LPFC_MBOX_OPCODE_GET_PROFILE_CONFIG 0xA4 #define LPFC_MBOX_OPCODE_WRITE_OBJECT 0xAC @@ -1238,6 +1269,110 @@ struct lpfc_mbx_mq_destroy { } u; }; +/* Start Gen 2 SLI4 Mailbox definitions: */ + +/* Define allocate-ready Gen 2 SLI4 FCoE Resource Extent Types. */ +#define LPFC_RSC_TYPE_FCOE_VFI 0x20 +#define LPFC_RSC_TYPE_FCOE_VPI 0x21 +#define LPFC_RSC_TYPE_FCOE_RPI 0x22 +#define LPFC_RSC_TYPE_FCOE_XRI 0x23 + +struct lpfc_mbx_get_rsrc_extent_info { + struct mbox_header header; + union { + struct { + uint32_t word4; +#define lpfc_mbx_get_rsrc_extent_info_type_SHIFT 0 +#define lpfc_mbx_get_rsrc_extent_info_type_MASK 0x0000FFFF +#define lpfc_mbx_get_rsrc_extent_info_type_WORD word4 + } req; + struct { + uint32_t word4; +#define lpfc_mbx_get_rsrc_extent_info_cnt_SHIFT 0 +#define lpfc_mbx_get_rsrc_extent_info_cnt_MASK 0x0000FFFF +#define lpfc_mbx_get_rsrc_extent_info_cnt_WORD word4 +#define lpfc_mbx_get_rsrc_extent_info_size_SHIFT 16 +#define lpfc_mbx_get_rsrc_extent_info_size_MASK 0x0000FFFF +#define lpfc_mbx_get_rsrc_extent_info_size_WORD word4 + } rsp; + } u; +}; + +struct lpfc_id_range { + uint32_t word5; +#define lpfc_mbx_rsrc_id_word4_0_SHIFT 0 +#define lpfc_mbx_rsrc_id_word4_0_MASK 0x0000FFFF +#define lpfc_mbx_rsrc_id_word4_0_WORD word5 +#define lpfc_mbx_rsrc_id_word4_1_SHIFT 16 +#define lpfc_mbx_rsrc_id_word4_1_MASK 0x0000FFFF +#define lpfc_mbx_rsrc_id_word4_1_WORD word5 +}; + +/* + * struct lpfc_mbx_alloc_rsrc_extents: + * A mbox is generically 256 bytes long. An SLI4_CONFIG mailbox requires + * 6 words of header + 4 words of shared subcommand header + + * 1 words of Extent-Opcode-specific header = 11 words or 44 bytes total. + * + * An embedded version of SLI4_CONFIG therefore has 256 - 44 = 212 bytes + * for extents payload. + * + * 212/2 (bytes per extent) = 106 extents. + * 106/2 (extents per word) = 53 words. + * lpfc_id_range id is statically size to 53. + * + * This mailbox definition is used for ALLOC or GET_ALLOCATED + * extent ranges. For ALLOC, the type and cnt are required. + * For GET_ALLOCATED, only the type is required. + */ +struct lpfc_mbx_alloc_rsrc_extents { + struct mbox_header header; + union { + struct { + uint32_t word4; +#define lpfc_mbx_alloc_rsrc_extents_type_SHIFT 0 +#define lpfc_mbx_alloc_rsrc_extents_type_MASK 0x0000FFFF +#define lpfc_mbx_alloc_rsrc_extents_type_WORD word4 +#define lpfc_mbx_alloc_rsrc_extents_cnt_SHIFT 16 +#define lpfc_mbx_alloc_rsrc_extents_cnt_MASK 0x0000FFFF +#define lpfc_mbx_alloc_rsrc_extents_cnt_WORD word4 + } req; + struct { + uint32_t word4; +#define lpfc_mbx_rsrc_cnt_SHIFT 0 +#define lpfc_mbx_rsrc_cnt_MASK 0x0000FFFF +#define lpfc_mbx_rsrc_cnt_WORD word4 + struct lpfc_id_range id[53]; + } rsp; + } u; +}; + +/* + * This is the non-embedded version of ALLOC or GET RSRC_EXTENTS. Word4 in this + * structure shares the same SHIFT/MASK/WORD defines provided in the + * mbx_alloc_rsrc_extents and mbx_get_alloc_rsrc_extents, word4, provided in + * the structures defined above. This non-embedded structure provides for the + * maximum number of extents supported by the port. + */ +struct lpfc_mbx_nembed_rsrc_extent { + union lpfc_sli4_cfg_shdr cfg_shdr; + uint32_t word4; + struct lpfc_id_range id; +}; + +struct lpfc_mbx_dealloc_rsrc_extents { + struct mbox_header header; + struct { + uint32_t word4; +#define lpfc_mbx_dealloc_rsrc_extents_type_SHIFT 0 +#define lpfc_mbx_dealloc_rsrc_extents_type_MASK 0x0000FFFF +#define lpfc_mbx_dealloc_rsrc_extents_type_WORD word4 + } req; + +}; + +/* Start SLI4 FCoE specific mbox structures. */ + struct lpfc_mbx_post_hdr_tmpl { struct mbox_header header; uint32_t word10; @@ -1801,61 +1936,31 @@ struct lpfc_mbx_read_rev { struct lpfc_mbx_read_config { uint32_t word1; -#define lpfc_mbx_rd_conf_max_bbc_SHIFT 0 -#define lpfc_mbx_rd_conf_max_bbc_MASK 0x000000FF -#define lpfc_mbx_rd_conf_max_bbc_WORD word1 -#define lpfc_mbx_rd_conf_init_bbc_SHIFT 8 -#define lpfc_mbx_rd_conf_init_bbc_MASK 0x000000FF -#define lpfc_mbx_rd_conf_init_bbc_WORD word1 +#define lpfc_mbx_rd_conf_extnts_inuse_SHIFT 31 +#define lpfc_mbx_rd_conf_extnts_inuse_MASK 0x00000001 +#define lpfc_mbx_rd_conf_extnts_inuse_WORD word1 uint32_t word2; -#define lpfc_mbx_rd_conf_nport_did_SHIFT 0 -#define lpfc_mbx_rd_conf_nport_did_MASK 0x00FFFFFF -#define lpfc_mbx_rd_conf_nport_did_WORD word2 #define lpfc_mbx_rd_conf_topology_SHIFT 24 #define lpfc_mbx_rd_conf_topology_MASK 0x000000FF #define lpfc_mbx_rd_conf_topology_WORD word2 - uint32_t word3; -#define lpfc_mbx_rd_conf_ao_SHIFT 0 -#define lpfc_mbx_rd_conf_ao_MASK 0x00000001 -#define lpfc_mbx_rd_conf_ao_WORD word3 -#define lpfc_mbx_rd_conf_bb_scn_SHIFT 8 -#define lpfc_mbx_rd_conf_bb_scn_MASK 0x0000000F -#define lpfc_mbx_rd_conf_bb_scn_WORD word3 -#define lpfc_mbx_rd_conf_cbb_scn_SHIFT 12 -#define lpfc_mbx_rd_conf_cbb_scn_MASK 0x0000000F -#define lpfc_mbx_rd_conf_cbb_scn_WORD word3 -#define lpfc_mbx_rd_conf_mc_SHIFT 29 -#define lpfc_mbx_rd_conf_mc_MASK 0x00000001 -#define lpfc_mbx_rd_conf_mc_WORD word3 + uint32_t rsvd_3; uint32_t word4; #define lpfc_mbx_rd_conf_e_d_tov_SHIFT 0 #define lpfc_mbx_rd_conf_e_d_tov_MASK 0x0000FFFF #define lpfc_mbx_rd_conf_e_d_tov_WORD word4 - uint32_t word5; -#define lpfc_mbx_rd_conf_lp_tov_SHIFT 0 -#define lpfc_mbx_rd_conf_lp_tov_MASK 0x0000FFFF -#define lpfc_mbx_rd_conf_lp_tov_WORD word5 + uint32_t rsvd_5; uint32_t word6; #define lpfc_mbx_rd_conf_r_a_tov_SHIFT 0 #define lpfc_mbx_rd_conf_r_a_tov_MASK 0x0000FFFF #define lpfc_mbx_rd_conf_r_a_tov_WORD word6 - uint32_t word7; -#define lpfc_mbx_rd_conf_r_t_tov_SHIFT 0 -#define lpfc_mbx_rd_conf_r_t_tov_MASK 0x000000FF -#define lpfc_mbx_rd_conf_r_t_tov_WORD word7 - uint32_t word8; -#define lpfc_mbx_rd_conf_al_tov_SHIFT 0 -#define lpfc_mbx_rd_conf_al_tov_MASK 0x0000000F -#define lpfc_mbx_rd_conf_al_tov_WORD word8 + uint32_t rsvd_7; + uint32_t rsvd_8; uint32_t word9; #define lpfc_mbx_rd_conf_lmt_SHIFT 0 #define lpfc_mbx_rd_conf_lmt_MASK 0x0000FFFF #define lpfc_mbx_rd_conf_lmt_WORD word9 - uint32_t word10; -#define lpfc_mbx_rd_conf_max_alpa_SHIFT 0 -#define lpfc_mbx_rd_conf_max_alpa_MASK 0x000000FF -#define lpfc_mbx_rd_conf_max_alpa_WORD word10 - uint32_t word11_rsvd; + uint32_t rsvd_10; + uint32_t rsvd_11; uint32_t word12; #define lpfc_mbx_rd_conf_xri_base_SHIFT 0 #define lpfc_mbx_rd_conf_xri_base_MASK 0x0000FFFF @@ -1885,9 +1990,6 @@ struct lpfc_mbx_read_config { #define lpfc_mbx_rd_conf_vfi_count_MASK 0x0000FFFF #define lpfc_mbx_rd_conf_vfi_count_WORD word15 uint32_t word16; -#define lpfc_mbx_rd_conf_fcfi_base_SHIFT 0 -#define lpfc_mbx_rd_conf_fcfi_base_MASK 0x0000FFFF -#define lpfc_mbx_rd_conf_fcfi_base_WORD word16 #define lpfc_mbx_rd_conf_fcfi_count_SHIFT 16 #define lpfc_mbx_rd_conf_fcfi_count_MASK 0x0000FFFF #define lpfc_mbx_rd_conf_fcfi_count_WORD word16 @@ -2197,6 +2299,12 @@ struct lpfc_sli4_parameters { #define cfg_fcoe_SHIFT 0 #define cfg_fcoe_MASK 0x00000001 #define cfg_fcoe_WORD word12 +#define cfg_ext_SHIFT 1 +#define cfg_ext_MASK 0x00000001 +#define cfg_ext_WORD word12 +#define cfg_hdrr_SHIFT 2 +#define cfg_hdrr_MASK 0x00000001 +#define cfg_hdrr_WORD word12 #define cfg_phwq_SHIFT 15 #define cfg_phwq_MASK 0x00000001 #define cfg_phwq_WORD word12 @@ -2431,6 +2539,9 @@ struct lpfc_mqe { struct lpfc_mbx_cq_destroy cq_destroy; struct lpfc_mbx_wq_destroy wq_destroy; struct lpfc_mbx_rq_destroy rq_destroy; + struct lpfc_mbx_get_rsrc_extent_info rsrc_extent_info; + struct lpfc_mbx_alloc_rsrc_extents alloc_rsrc_extents; + struct lpfc_mbx_dealloc_rsrc_extents dealloc_rsrc_extents; struct lpfc_mbx_post_sgl_pages post_sgl_pages; struct lpfc_mbx_nembed_cmd nembed_cmd; struct lpfc_mbx_read_rev read_rev; @@ -2651,7 +2762,7 @@ struct lpfc_bmbx_create { #define SGL_ALIGN_SZ 64 #define SGL_PAGE_SIZE 4096 /* align SGL addr on a size boundary - adjust address up */ -#define NO_XRI ((uint16_t)-1) +#define NO_XRI 0xffff struct wqe_common { uint32_t word6; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 2b535cff4b2a..09632ea689e9 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -212,7 +212,6 @@ lpfc_config_port_prep(struct lpfc_hba *phba) lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL); if (!lpfc_vpd_data) goto out_free_mbox; - do { lpfc_dump_mem(phba, pmb, offset, DMP_REGION_VPD); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); @@ -603,7 +602,6 @@ lpfc_config_port_post(struct lpfc_hba *phba) /* Clear all pending interrupts */ writel(0xffffffff, phba->HAregaddr); readl(phba->HAregaddr); /* flush */ - phba->link_state = LPFC_HBA_ERROR; if (rc != MBX_BUSY) mempool_free(pmb, phba->mbox_mem_pool); @@ -2690,6 +2688,7 @@ lpfc_scsi_free(struct lpfc_hba *phba) kfree(io); phba->total_iocbq_bufs--; } + spin_unlock_irq(&phba->hbalock); return 0; } @@ -3646,6 +3645,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba, lpfc_printf_log(phba, KERN_ERR, LOG_FIP | LOG_DISCOVERY, "2718 Clear Virtual Link Received for VPI 0x%x" " tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag); + vport = lpfc_find_vport_by_vpid(phba, acqe_fip->index - phba->vpi_base); ndlp = lpfc_sli4_perform_vport_cvl(vport); @@ -4319,7 +4319,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) spin_lock_init(&phba->sli4_hba.abts_sgl_list_lock); /* - * Initialize dirver internal slow-path work queues + * Initialize driver internal slow-path work queues */ /* Driver internel slow-path CQ Event pool */ @@ -4335,6 +4335,12 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) /* Receive queue CQ Event work queue list */ INIT_LIST_HEAD(&phba->sli4_hba.sp_unsol_work_queue); + /* Initialize extent block lists. */ + INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_blk_list); + INIT_LIST_HEAD(&phba->sli4_hba.lpfc_xri_blk_list); + INIT_LIST_HEAD(&phba->sli4_hba.lpfc_vfi_blk_list); + INIT_LIST_HEAD(&phba->lpfc_vpi_blk_list); + /* Initialize the driver internal SLI layer lists. */ lpfc_sli_setup(phba); lpfc_sli_queue_setup(phba); @@ -4409,9 +4415,19 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) } /* * Get sli4 parameters that override parameters from Port capabilities. - * If this call fails it is not a critical error so continue loading. + * If this call fails, it isn't critical unless the SLI4 parameters come + * back in conflict. */ - lpfc_get_sli4_parameters(phba, mboxq); + rc = lpfc_get_sli4_parameters(phba, mboxq); + if (rc) { + if (phba->sli4_hba.extents_in_use && + phba->sli4_hba.rpi_hdrs_in_use) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2999 Unsupported SLI4 Parameters " + "Extents and RPI headers enabled.\n"); + goto out_free_bsmbx; + } + } mempool_free(mboxq, phba->mbox_mem_pool); /* Create all the SLI4 queues */ rc = lpfc_sli4_queue_create(phba); @@ -4436,7 +4452,6 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) "1430 Failed to initialize sgl list.\n"); goto out_free_sgl_list; } - rc = lpfc_sli4_init_rpi_hdrs(phba); if (rc) { lpfc_printf_log(phba, KERN_ERR, LOG_INIT, @@ -4555,6 +4570,9 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba) lpfc_sli4_cq_event_release_all(phba); lpfc_sli4_cq_event_pool_destroy(phba); + /* Release resource identifiers. */ + lpfc_sli4_dealloc_resource_identifiers(phba); + /* Free the bsmbx region. */ lpfc_destroy_bootstrap_mbox(phba); @@ -4755,6 +4773,7 @@ lpfc_init_iocb_list(struct lpfc_hba *phba, int iocb_count) "Unloading driver.\n", __func__); goto out_free_iocbq; } + iocbq_entry->sli4_lxritag = NO_XRI; iocbq_entry->sli4_xritag = NO_XRI; spin_lock_irq(&phba->hbalock); @@ -4852,7 +4871,7 @@ lpfc_init_sgl_list(struct lpfc_hba *phba) els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba); lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "2400 lpfc_init_sgl_list els %d.\n", + "2400 ELS XRI count %d.\n", els_xri_cnt); /* Initialize and populate the sglq list per host/VF. */ INIT_LIST_HEAD(&phba->sli4_hba.lpfc_sgl_list); @@ -4885,7 +4904,6 @@ lpfc_init_sgl_list(struct lpfc_hba *phba) phba->sli4_hba.scsi_xri_max = phba->sli4_hba.max_cfg_param.max_xri - els_xri_cnt; phba->sli4_hba.scsi_xri_cnt = 0; - phba->sli4_hba.lpfc_scsi_psb_array = kzalloc((sizeof(struct lpfc_scsi_buf *) * phba->sli4_hba.scsi_xri_max), GFP_KERNEL); @@ -4908,13 +4926,6 @@ lpfc_init_sgl_list(struct lpfc_hba *phba) goto out_free_mem; } - sglq_entry->sli4_xritag = lpfc_sli4_next_xritag(phba); - if (sglq_entry->sli4_xritag == NO_XRI) { - kfree(sglq_entry); - printk(KERN_ERR "%s: failed to allocate XRI.\n" - "Unloading driver.\n", __func__); - goto out_free_mem; - } sglq_entry->buff_type = GEN_BUFF_TYPE; sglq_entry->virt = lpfc_mbuf_alloc(phba, 0, &sglq_entry->phys); if (sglq_entry->virt == NULL) { @@ -4963,24 +4974,20 @@ int lpfc_sli4_init_rpi_hdrs(struct lpfc_hba *phba) { int rc = 0; - int longs; - uint16_t rpi_count; struct lpfc_rpi_hdr *rpi_hdr; INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list); - /* - * Provision an rpi bitmask range for discovery. The total count - * is the difference between max and base + 1. + * If the SLI4 port supports extents, posting the rpi header isn't + * required. Set the expected maximum count and let the actual value + * get set when extents are fully allocated. */ - rpi_count = phba->sli4_hba.max_cfg_param.rpi_base + - phba->sli4_hba.max_cfg_param.max_rpi - 1; - - longs = ((rpi_count) + BITS_PER_LONG - 1) / BITS_PER_LONG; - phba->sli4_hba.rpi_bmask = kzalloc(longs * sizeof(unsigned long), - GFP_KERNEL); - if (!phba->sli4_hba.rpi_bmask) - return -ENOMEM; + if (!phba->sli4_hba.rpi_hdrs_in_use) { + phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.max_rpi; + return rc; + } + if (phba->sli4_hba.extents_in_use) + return -EIO; rpi_hdr = lpfc_sli4_create_rpi_hdr(phba); if (!rpi_hdr) { @@ -5014,11 +5021,28 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) struct lpfc_rpi_hdr *rpi_hdr; uint32_t rpi_count; + /* + * If the SLI4 port supports extents, posting the rpi header isn't + * required. Set the expected maximum count and let the actual value + * get set when extents are fully allocated. + */ + if (!phba->sli4_hba.rpi_hdrs_in_use) + return NULL; + if (phba->sli4_hba.extents_in_use) + return NULL; + + /* The limit on the logical index is just the max_rpi count. */ rpi_limit = phba->sli4_hba.max_cfg_param.rpi_base + - phba->sli4_hba.max_cfg_param.max_rpi - 1; + phba->sli4_hba.max_cfg_param.max_rpi - 1; spin_lock_irq(&phba->hbalock); - curr_rpi_range = phba->sli4_hba.next_rpi; + /* + * Establish the starting RPI in this header block. The starting + * rpi is normalized to a zero base because the physical rpi is + * port based. + */ + curr_rpi_range = phba->sli4_hba.next_rpi - + phba->sli4_hba.max_cfg_param.rpi_base; spin_unlock_irq(&phba->hbalock); /* @@ -5031,6 +5055,8 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) else rpi_count = LPFC_RPI_HDR_COUNT; + if (!rpi_count) + return NULL; /* * First allocate the protocol header region for the port. The * port expects a 4KB DMA-mapped memory region that is 4K aligned. @@ -5063,12 +5089,14 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) rpi_hdr->len = LPFC_HDR_TEMPLATE_SIZE; rpi_hdr->page_count = 1; spin_lock_irq(&phba->hbalock); - rpi_hdr->start_rpi = phba->sli4_hba.next_rpi; + + /* The rpi_hdr stores the logical index only. */ + rpi_hdr->start_rpi = curr_rpi_range; list_add_tail(&rpi_hdr->list, &phba->sli4_hba.lpfc_rpi_hdr_list); /* - * The next_rpi stores the next module-64 rpi value to post - * in any subsequent rpi memory region postings. + * The next_rpi stores the next logical module-64 rpi value used + * to post physical rpis in subsequent rpi postings. */ phba->sli4_hba.next_rpi += rpi_count; spin_unlock_irq(&phba->hbalock); @@ -5087,15 +5115,18 @@ lpfc_sli4_create_rpi_hdr(struct lpfc_hba *phba) * @phba: pointer to lpfc hba data structure. * * This routine is invoked to remove all memory resources allocated - * to support rpis. This routine presumes the caller has released all - * rpis consumed by fabric or port logins and is prepared to have - * the header pages removed. + * to support rpis for SLI4 ports not supporting extents. This routine + * presumes the caller has released all rpis consumed by fabric or port + * logins and is prepared to have the header pages removed. **/ void lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba) { struct lpfc_rpi_hdr *rpi_hdr, *next_rpi_hdr; + if (!phba->sli4_hba.rpi_hdrs_in_use) + goto exit; + list_for_each_entry_safe(rpi_hdr, next_rpi_hdr, &phba->sli4_hba.lpfc_rpi_hdr_list, list) { list_del(&rpi_hdr->list); @@ -5104,7 +5135,9 @@ lpfc_sli4_remove_rpi_hdrs(struct lpfc_hba *phba) kfree(rpi_hdr->dmabuf); kfree(rpi_hdr); } - phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.rpi_base; + exit: + /* There are no rpis available to the port now. */ + phba->sli4_hba.next_rpi = 0; } /** @@ -5873,6 +5906,8 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) rc = -EIO; } else { rd_config = &pmb->u.mqe.un.rd_config; + phba->sli4_hba.extents_in_use = + bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config); phba->sli4_hba.max_cfg_param.max_xri = bf_get(lpfc_mbx_rd_conf_xri_count, rd_config); phba->sli4_hba.max_cfg_param.xri_base = @@ -5891,8 +5926,6 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) bf_get(lpfc_mbx_rd_conf_vfi_base, rd_config); phba->sli4_hba.max_cfg_param.max_fcfi = bf_get(lpfc_mbx_rd_conf_fcfi_count, rd_config); - phba->sli4_hba.max_cfg_param.fcfi_base = - bf_get(lpfc_mbx_rd_conf_fcfi_base, rd_config); phba->sli4_hba.max_cfg_param.max_eq = bf_get(lpfc_mbx_rd_conf_eq_count, rd_config); phba->sli4_hba.max_cfg_param.max_rq = @@ -5910,11 +5943,13 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) (phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0; phba->max_vports = phba->max_vpi; lpfc_printf_log(phba, KERN_INFO, LOG_SLI, - "2003 cfg params XRI(B:%d M:%d), " + "2003 cfg params Extents? %d " + "XRI(B:%d M:%d), " "VPI(B:%d M:%d) " "VFI(B:%d M:%d) " "RPI(B:%d M:%d) " - "FCFI(B:%d M:%d)\n", + "FCFI(Count:%d)\n", + phba->sli4_hba.extents_in_use, phba->sli4_hba.max_cfg_param.xri_base, phba->sli4_hba.max_cfg_param.max_xri, phba->sli4_hba.max_cfg_param.vpi_base, @@ -5923,7 +5958,6 @@ lpfc_sli4_read_config(struct lpfc_hba *phba) phba->sli4_hba.max_cfg_param.max_vfi, phba->sli4_hba.max_cfg_param.rpi_base, phba->sli4_hba.max_cfg_param.max_rpi, - phba->sli4_hba.max_cfg_param.fcfi_base, phba->sli4_hba.max_cfg_param.max_fcfi); } @@ -8104,6 +8138,13 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) int length; struct lpfc_sli4_parameters *mbx_sli4_parameters; + /* + * By default, the driver assumes the SLI4 port requires RPI + * header postings. The SLI4_PARAM response will correct this + * assumption. + */ + phba->sli4_hba.rpi_hdrs_in_use = 1; + /* Read the port's SLI4 Config Parameters */ length = (sizeof(struct lpfc_mbx_get_sli4_parameters) - sizeof(struct lpfc_sli4_cfg_mhdr)); @@ -8140,6 +8181,8 @@ lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq) mbx_sli4_parameters); sli4_params->sgl_pp_align = bf_get(cfg_sgl_pp_align, mbx_sli4_parameters); + phba->sli4_hba.extents_in_use = bf_get(cfg_ext, mbx_sli4_parameters); + phba->sli4_hba.rpi_hdrs_in_use = bf_get(cfg_hdrr, mbx_sli4_parameters); /* Make sure that sge_supp_len can be handled by the driver */ if (sli4_params->sge_supp_len > LPFC_MAX_SGE_SIZE) diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c index e6ce9033f85e..556767028353 100644 --- a/drivers/scsi/lpfc/lpfc_mbox.c +++ b/drivers/scsi/lpfc/lpfc_mbox.c @@ -610,7 +610,8 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi) mb->un.varRdSparm.un.sp64.tus.f.bdeSize = sizeof (struct serv_parm); mb->un.varRdSparm.un.sp64.addrHigh = putPaddrHigh(mp->phys); mb->un.varRdSparm.un.sp64.addrLow = putPaddrLow(mp->phys); - mb->un.varRdSparm.vpi = vpi + phba->vpi_base; + if (phba->sli_rev >= LPFC_SLI_REV3) + mb->un.varRdSparm.vpi = phba->vpi_ids[vpi]; /* save address for completion */ pmb->context1 = mp; @@ -643,9 +644,10 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did, memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varUnregDID.did = did; - if (vpi != 0xffff) - vpi += phba->vpi_base; mb->un.varUnregDID.vpi = vpi; + if ((vpi != 0xffff) && + (phba->sli_rev == LPFC_SLI_REV4)) + mb->un.varUnregDID.vpi = phba->vpi_ids[vpi]; mb->mbxCommand = MBX_UNREG_D_ID; mb->mbxOwner = OWN_HOST; @@ -738,12 +740,10 @@ lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); mb->un.varRegLogin.rpi = 0; - if (phba->sli_rev == LPFC_SLI_REV4) { - mb->un.varRegLogin.rpi = rpi; - if (mb->un.varRegLogin.rpi == LPFC_RPI_ALLOC_ERROR) - return 1; - } - mb->un.varRegLogin.vpi = vpi + phba->vpi_base; + if (phba->sli_rev == LPFC_SLI_REV4) + mb->un.varRegLogin.rpi = phba->sli4_hba.rpi_ids[rpi]; + if (phba->sli_rev >= LPFC_SLI_REV3) + mb->un.varRegLogin.vpi = phba->vpi_ids[vpi]; mb->un.varRegLogin.did = did; mb->mbxOwner = OWN_HOST; /* Get a buffer to hold NPorts Service Parameters */ @@ -757,7 +757,7 @@ lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, "0302 REG_LOGIN: no buffers, VPI:%d DID:x%x, " "rpi x%x\n", vpi, did, rpi); - return (1); + return 1; } INIT_LIST_HEAD(&mp->list); sparam = mp->virt; @@ -773,7 +773,7 @@ lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, mb->un.varRegLogin.un.sp64.addrHigh = putPaddrHigh(mp->phys); mb->un.varRegLogin.un.sp64.addrLow = putPaddrLow(mp->phys); - return (0); + return 0; } /** @@ -789,6 +789,9 @@ lpfc_reg_rpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t did, * * This routine prepares the mailbox command for unregistering remote port * login. + * + * For SLI4 ports, the rpi passed to this function must be the physical + * rpi value, not the logical index. **/ void lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, @@ -799,9 +802,10 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi, mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); - mb->un.varUnregLogin.rpi = (uint16_t) rpi; + mb->un.varUnregLogin.rpi = rpi; mb->un.varUnregLogin.rsvd1 = 0; - mb->un.varUnregLogin.vpi = vpi + phba->vpi_base; + if (phba->sli_rev >= LPFC_SLI_REV3) + mb->un.varUnregLogin.vpi = phba->vpi_ids[vpi]; mb->mbxCommand = MBX_UNREG_LOGIN; mb->mbxOwner = OWN_HOST; @@ -825,9 +829,16 @@ lpfc_sli4_unreg_all_rpis(struct lpfc_vport *vport) mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (mbox) { - lpfc_unreg_login(phba, vport->vpi, - vport->vpi + phba->vpi_base, mbox); - mbox->u.mb.un.varUnregLogin.rsvd1 = 0x4000 ; + /* + * For SLI4 functions, the rpi field is overloaded for + * the vport context unreg all. This routine passes + * 0 for the rpi field in lpfc_unreg_login for compatibility + * with SLI3 and then overrides the rpi field with the + * expected value for SLI4. + */ + lpfc_unreg_login(phba, vport->vpi, phba->vpi_ids[vport->vpi], + mbox); + mbox->u.mb.un.varUnregLogin.rsvd1 = 0x4000; mbox->vport = vport; mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl; mbox->context1 = NULL; @@ -865,9 +876,13 @@ lpfc_reg_vpi(struct lpfc_vport *vport, LPFC_MBOXQ_t *pmb) if ((phba->sli_rev == LPFC_SLI_REV4) && !(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) mb->un.varRegVpi.upd = 1; - mb->un.varRegVpi.vpi = vport->vpi + vport->phba->vpi_base; + + mb->un.varRegVpi.vpi = phba->vpi_ids[vport->vpi]; mb->un.varRegVpi.sid = vport->fc_myDID; - mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base; + if (phba->sli_rev == LPFC_SLI_REV4) + mb->un.varRegVpi.vfi = phba->sli4_hba.vfi_ids[vport->vfi]; + else + mb->un.varRegVpi.vfi = vport->vfi + vport->phba->vfi_base; memcpy(mb->un.varRegVpi.wwn, &vport->fc_portname, sizeof(struct lpfc_name)); mb->un.varRegVpi.wwn[0] = cpu_to_le32(mb->un.varRegVpi.wwn[0]); @@ -901,10 +916,10 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb) MAILBOX_t *mb = &pmb->u.mb; memset(pmb, 0, sizeof (LPFC_MBOXQ_t)); - if (phba->sli_rev < LPFC_SLI_REV4) - mb->un.varUnregVpi.vpi = vpi + phba->vpi_base; - else - mb->un.varUnregVpi.sli4_vpi = vpi + phba->vpi_base; + if (phba->sli_rev == LPFC_SLI_REV3) + mb->un.varUnregVpi.vpi = phba->vpi_ids[vpi]; + else if (phba->sli_rev >= LPFC_SLI_REV4) + mb->un.varUnregVpi.sli4_vpi = phba->vpi_ids[vpi]; mb->mbxCommand = MBX_UNREG_VPI; mb->mbxOwner = OWN_HOST; @@ -1735,12 +1750,12 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, return length; } - /* Setup for the none-embedded mbox command */ + /* Setup for the non-embedded mbox command */ pcount = (SLI4_PAGE_ALIGN(length))/SLI4_PAGE_SIZE; pcount = (pcount > LPFC_SLI4_MBX_SGE_MAX_PAGES) ? LPFC_SLI4_MBX_SGE_MAX_PAGES : pcount; /* Allocate record for keeping SGE virtual addresses */ - mbox->sge_array = kmalloc(sizeof(struct lpfc_mbx_nembed_sge_virt), + mbox->sge_array = kzalloc(sizeof(struct lpfc_mbx_nembed_sge_virt), GFP_KERNEL); if (!mbox->sge_array) { lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, @@ -1790,11 +1805,86 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox, /* The sub-header is in DMA memory, which needs endian converstion */ if (cfg_shdr) lpfc_sli_pcimem_bcopy(cfg_shdr, cfg_shdr, - sizeof(union lpfc_sli4_cfg_shdr)); - + sizeof(union lpfc_sli4_cfg_shdr)); return alloc_len; } +/** + * lpfc_sli4_mbox_rsrc_extent - Initialize the opcode resource extent. + * @phba: pointer to lpfc hba data structure. + * @mbox: pointer to an allocated lpfc mbox resource. + * @exts_count: the number of extents, if required, to allocate. + * @rsrc_type: the resource extent type. + * @emb: true if LPFC_SLI4_MBX_EMBED. false if LPFC_SLI4_MBX_NEMBED. + * + * This routine completes the subcommand header for SLI4 resource extent + * mailbox commands. It is called after lpfc_sli4_config. The caller must + * pass an allocated mailbox and the attributes required to initialize the + * mailbox correctly. + * + * Return: the actual length of the mbox command allocated. + **/ +int +lpfc_sli4_mbox_rsrc_extent(struct lpfc_hba *phba, struct lpfcMboxq *mbox, + uint16_t exts_count, uint16_t rsrc_type, bool emb) +{ + uint8_t opcode = 0; + struct lpfc_mbx_nembed_rsrc_extent *n_rsrc_extnt = NULL; + void *virtaddr = NULL; + + /* Set up SLI4 ioctl command header fields */ + if (emb == LPFC_SLI4_MBX_NEMBED) { + /* Get the first SGE entry from the non-embedded DMA memory */ + virtaddr = mbox->sge_array->addr[0]; + if (virtaddr == NULL) + return 1; + n_rsrc_extnt = (struct lpfc_mbx_nembed_rsrc_extent *) virtaddr; + } + + /* + * The resource type is common to all extent Opcodes and resides in the + * same position. + */ + if (emb == LPFC_SLI4_MBX_EMBED) + bf_set(lpfc_mbx_alloc_rsrc_extents_type, + &mbox->u.mqe.un.alloc_rsrc_extents.u.req, + rsrc_type); + else { + /* This is DMA data. Byteswap is required. */ + bf_set(lpfc_mbx_alloc_rsrc_extents_type, + n_rsrc_extnt, rsrc_type); + lpfc_sli_pcimem_bcopy(&n_rsrc_extnt->word4, + &n_rsrc_extnt->word4, + sizeof(uint32_t)); + } + + /* Complete the initialization for the particular Opcode. */ + opcode = lpfc_sli4_mbox_opcode_get(phba, mbox); + switch (opcode) { + case LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT: + if (emb == LPFC_SLI4_MBX_EMBED) + bf_set(lpfc_mbx_alloc_rsrc_extents_cnt, + &mbox->u.mqe.un.alloc_rsrc_extents.u.req, + exts_count); + else + bf_set(lpfc_mbx_alloc_rsrc_extents_cnt, + n_rsrc_extnt, exts_count); + break; + case LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT: + case LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO: + case LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT: + /* Initialization is complete.*/ + break; + default: + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX, + "2929 Resource Extent Opcode x%x is " + "unsupported\n", opcode); + return 1; + } + + return 0; +} + /** * lpfc_sli4_mbox_opcode_get - Get the opcode from a sli4 mailbox command * @phba: pointer to lpfc hba data structure. @@ -1939,9 +2029,12 @@ lpfc_init_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport) bf_set(lpfc_init_vfi_vr, init_vfi, 1); bf_set(lpfc_init_vfi_vt, init_vfi, 1); bf_set(lpfc_init_vfi_vp, init_vfi, 1); - bf_set(lpfc_init_vfi_vfi, init_vfi, vport->vfi + vport->phba->vfi_base); - bf_set(lpfc_init_vpi_vpi, init_vfi, vport->vpi + vport->phba->vpi_base); - bf_set(lpfc_init_vfi_fcfi, init_vfi, vport->phba->fcf.fcfi); + bf_set(lpfc_init_vfi_vfi, init_vfi, + vport->phba->sli4_hba.vfi_ids[vport->vfi]); + bf_set(lpfc_init_vpi_vpi, init_vfi, + vport->phba->vpi_ids[vport->vpi]); + bf_set(lpfc_init_vfi_fcfi, init_vfi, + vport->phba->fcf.fcfi); } /** @@ -1964,9 +2057,10 @@ lpfc_reg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport, dma_addr_t phys) reg_vfi = &mbox->u.mqe.un.reg_vfi; bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_REG_VFI); bf_set(lpfc_reg_vfi_vp, reg_vfi, 1); - bf_set(lpfc_reg_vfi_vfi, reg_vfi, vport->vfi + vport->phba->vfi_base); + bf_set(lpfc_reg_vfi_vfi, reg_vfi, + vport->phba->sli4_hba.vfi_ids[vport->vfi]); bf_set(lpfc_reg_vfi_fcfi, reg_vfi, vport->phba->fcf.fcfi); - bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->vpi + vport->phba->vpi_base); + bf_set(lpfc_reg_vfi_vpi, reg_vfi, vport->phba->vpi_ids[vport->vpi]); memcpy(reg_vfi->wwn, &vport->fc_portname, sizeof(struct lpfc_name)); reg_vfi->wwn[0] = cpu_to_le32(reg_vfi->wwn[0]); reg_vfi->wwn[1] = cpu_to_le32(reg_vfi->wwn[1]); @@ -1997,9 +2091,9 @@ lpfc_init_vpi(struct lpfc_hba *phba, struct lpfcMboxq *mbox, uint16_t vpi) memset(mbox, 0, sizeof(*mbox)); bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_INIT_VPI); bf_set(lpfc_init_vpi_vpi, &mbox->u.mqe.un.init_vpi, - vpi + phba->vpi_base); + phba->vpi_ids[vpi]); bf_set(lpfc_init_vpi_vfi, &mbox->u.mqe.un.init_vpi, - phba->pport->vfi + phba->vfi_base); + phba->sli4_hba.vfi_ids[phba->pport->vfi]); } /** @@ -2019,7 +2113,7 @@ lpfc_unreg_vfi(struct lpfcMboxq *mbox, struct lpfc_vport *vport) memset(mbox, 0, sizeof(*mbox)); bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_UNREG_VFI); bf_set(lpfc_unreg_vfi_vfi, &mbox->u.mqe.un.unreg_vfi, - vport->vfi + vport->phba->vfi_base); + vport->phba->sli4_hba.vfi_ids[vport->vfi]); } /** @@ -2131,12 +2225,14 @@ lpfc_unreg_fcfi(struct lpfcMboxq *mbox, uint16_t fcfi) void lpfc_resume_rpi(struct lpfcMboxq *mbox, struct lpfc_nodelist *ndlp) { + struct lpfc_hba *phba = ndlp->phba; struct lpfc_mbx_resume_rpi *resume_rpi; memset(mbox, 0, sizeof(*mbox)); resume_rpi = &mbox->u.mqe.un.resume_rpi; bf_set(lpfc_mqe_command, &mbox->u.mqe, MBX_RESUME_RPI); - bf_set(lpfc_resume_rpi_index, resume_rpi, ndlp->nlp_rpi); + bf_set(lpfc_resume_rpi_index, resume_rpi, + phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); bf_set(lpfc_resume_rpi_ii, resume_rpi, RESUME_INDEX_RPI); resume_rpi->event_tag = ndlp->phba->fc_eventTag; } diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c index cbb48ee8b0bb..10d5b5e41499 100644 --- a/drivers/scsi/lpfc/lpfc_mem.c +++ b/drivers/scsi/lpfc/lpfc_mem.c @@ -62,7 +62,6 @@ int lpfc_mem_alloc(struct lpfc_hba *phba, int align) { struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool; - int longs; int i; if (phba->sli_rev == LPFC_SLI_REV4) @@ -138,17 +137,8 @@ lpfc_mem_alloc(struct lpfc_hba *phba, int align) phba->lpfc_hrb_pool = NULL; phba->lpfc_drb_pool = NULL; } - /* vpi zero is reserved for the physical port so add 1 to max */ - longs = ((phba->max_vpi + 1) + BITS_PER_LONG - 1) / BITS_PER_LONG; - phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), GFP_KERNEL); - if (!phba->vpi_bmask) - goto fail_free_dbq_pool; return 0; - - fail_free_dbq_pool: - pci_pool_destroy(phba->lpfc_drb_pool); - phba->lpfc_drb_pool = NULL; fail_free_hrb_pool: pci_pool_destroy(phba->lpfc_hrb_pool); phba->lpfc_hrb_pool = NULL; @@ -191,9 +181,6 @@ lpfc_mem_free(struct lpfc_hba *phba) int i; struct lpfc_dma_pool *pool = &phba->lpfc_mbuf_safety_pool; - /* Free VPI bitmask memory */ - kfree(phba->vpi_bmask); - /* Free HBQ pools */ lpfc_sli_hbqbuf_free_all(phba); if (phba->lpfc_drb_pool) diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c index 9bf7eb85d172..2ddd02f7c603 100644 --- a/drivers/scsi/lpfc/lpfc_nportdisc.c +++ b/drivers/scsi/lpfc/lpfc_nportdisc.c @@ -652,6 +652,7 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp) lpfc_unreg_rpi(vport, ndlp); return 0; } + /** * lpfc_release_rpi - Release a RPI by issuing unreg_login mailbox cmd. * @phba : Pointer to lpfc_hba structure. @@ -1394,8 +1395,11 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport, if (mb->mbxStatus) { /* RegLogin failed */ lpfc_printf_vlog(vport, KERN_ERR, LOG_DISCOVERY, - "0246 RegLogin failed Data: x%x x%x x%x\n", - did, mb->mbxStatus, vport->port_state); + "0246 RegLogin failed Data: x%x x%x x%x x%x " + "x%x\n", + did, mb->mbxStatus, vport->port_state, + mb->un.varRegLogin.vpi, + mb->un.varRegLogin.rpi); /* * If RegLogin failed due to lack of HBA resources do not * retry discovery. @@ -1419,7 +1423,10 @@ lpfc_cmpl_reglogin_reglogin_issue(struct lpfc_vport *vport, return ndlp->nlp_state; } - ndlp->nlp_rpi = mb->un.varWords[0]; + /* SLI4 ports have preallocated logical rpis. */ + if (vport->phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; + ndlp->nlp_flag |= NLP_RPI_REGISTERED; /* Only if we are not a fabric nport do we issue PRLI */ @@ -2020,7 +2027,9 @@ lpfc_cmpl_reglogin_npr_node(struct lpfc_vport *vport, MAILBOX_t *mb = &pmb->u.mb; if (!mb->mbxStatus) { - ndlp->nlp_rpi = mb->un.varWords[0]; + /* SLI4 ports have preallocated logical rpis. */ + if (vport->phba->sli_rev < LPFC_SLI_REV4) + ndlp->nlp_rpi = mb->un.varWords[0]; ndlp->nlp_flag |= NLP_RPI_REGISTERED; } else { if (ndlp->nlp_flag & NLP_NODEV_REMOVE) { diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c index bc8359b038c4..3ccc97496ebf 100644 --- a/drivers/scsi/lpfc/lpfc_scsi.c +++ b/drivers/scsi/lpfc/lpfc_scsi.c @@ -743,7 +743,14 @@ lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *phba) if (bcnt == 0) continue; /* Now, post the SCSI buffer list sgls as a block */ - status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt); + if (!phba->sli4_hba.extents_in_use) + status = lpfc_sli4_post_scsi_sgl_block(phba, + &sblist, + bcnt); + else + status = lpfc_sli4_post_scsi_sgl_blk_ext(phba, + &sblist, + bcnt); /* Reset SCSI buffer count for next round of posting */ bcnt = 0; while (!list_empty(&sblist)) { @@ -787,7 +794,7 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) dma_addr_t pdma_phys_fcp_cmd; dma_addr_t pdma_phys_fcp_rsp; dma_addr_t pdma_phys_bpl, pdma_phys_bpl1; - uint16_t iotag, last_xritag = NO_XRI; + uint16_t iotag, last_xritag = NO_XRI, lxri = 0; int status = 0, index; int bcnt; int non_sequential_xri = 0; @@ -823,13 +830,15 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) break; } - psb->cur_iocbq.sli4_xritag = lpfc_sli4_next_xritag(phba); - if (psb->cur_iocbq.sli4_xritag == NO_XRI) { + lxri = lpfc_sli4_next_xritag(phba); + if (lxri == NO_XRI) { pci_pool_free(phba->lpfc_scsi_dma_buf_pool, psb->data, psb->dma_handle); kfree(psb); break; } + psb->cur_iocbq.sli4_lxritag = lxri; + psb->cur_iocbq.sli4_xritag = phba->sli4_hba.xri_ids[lxri]; if (last_xritag != NO_XRI && psb->cur_iocbq.sli4_xritag != (last_xritag+1)) { non_sequential_xri = 1; @@ -916,7 +925,21 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) } } if (bcnt) { - status = lpfc_sli4_post_scsi_sgl_block(phba, &sblist, bcnt); + if (!phba->sli4_hba.extents_in_use) + status = lpfc_sli4_post_scsi_sgl_block(phba, + &sblist, + bcnt); + else + status = lpfc_sli4_post_scsi_sgl_blk_ext(phba, + &sblist, + bcnt); + + if (status) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "3021 SCSI SGL post error %d\n", + status); + bcnt = 0; + } /* Reset SCSI buffer count for next round of posting */ while (!list_empty(&sblist)) { list_remove_head(&sblist, psb, struct lpfc_scsi_buf, @@ -2797,6 +2820,9 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, * of the scsi_cmnd request_buffer */ piocbq->iocb.ulpContext = pnode->nlp_rpi; + if (phba->sli_rev == LPFC_SLI_REV4) + piocbq->iocb.ulpContext = + phba->sli4_hba.rpi_ids[pnode->nlp_rpi]; if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE) piocbq->iocb.ulpFCP2Rcvy = 1; else @@ -2810,7 +2836,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd, } /** - * lpfc_scsi_prep_task_mgmt_cmnd - Convert SLI3 scsi TM cmd to FCP info unit + * lpfc_scsi_prep_task_mgmt_cmd - Convert SLI3 scsi TM cmd to FCP info unit * @vport: The virtual port for which this call is being executed. * @lpfc_cmd: Pointer to lpfc_scsi_buf data structure. * @lun: Logical unit number. @@ -2854,6 +2880,10 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport, lpfc_fcpcmd_to_iocb(piocb->unsli3.fcp_ext.icd, fcp_cmnd); piocb->ulpCommand = CMD_FCP_ICMND64_CR; piocb->ulpContext = ndlp->nlp_rpi; + if (vport->phba->sli_rev == LPFC_SLI_REV4) { + piocb->ulpContext = + vport->phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; + } if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) { piocb->ulpFCP2Rcvy = 1; } @@ -3408,9 +3438,10 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata, lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP, "0702 Issue %s to TGT %d LUN %d " - "rpi x%x nlp_flag x%x\n", + "rpi x%x nlp_flag x%x Data: x%x x%x\n", lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id, - pnode->nlp_rpi, pnode->nlp_flag); + pnode->nlp_rpi, pnode->nlp_flag, iocbq->sli4_xritag, + iocbq->iocb_flag); status = lpfc_sli_issue_iocb_wait(phba, LPFC_FCP_RING, iocbq, iocbqrsp, lpfc_cmd->timeout); @@ -3422,10 +3453,12 @@ lpfc_send_taskmgmt(struct lpfc_vport *vport, struct lpfc_rport_data *rdata, ret = FAILED; lpfc_cmd->status = IOSTAT_DRIVER_REJECT; lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP, - "0727 TMF %s to TGT %d LUN %d failed (%d, %d)\n", + "0727 TMF %s to TGT %d LUN %d failed (%d, %d) " + "iocb_flag x%x\n", lpfc_taskmgmt_name(task_mgmt_cmd), tgt_id, lun_id, iocbqrsp->iocb.ulpStatus, - iocbqrsp->iocb.un.ulpWord[4]); + iocbqrsp->iocb.un.ulpWord[4], + iocbq->iocb_flag); } else if (status == IOCB_BUSY) ret = FAILED; else diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index fcfa8c8cfb67..98999bbd8cbf 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -459,7 +459,6 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba) struct lpfc_iocbq * iocbq = NULL; list_remove_head(lpfc_iocb_list, iocbq, struct lpfc_iocbq, list); - if (iocbq) phba->iocb_cnt++; if (phba->iocb_cnt > phba->iocb_max) @@ -482,13 +481,10 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba) static struct lpfc_sglq * __lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag) { - uint16_t adj_xri; struct lpfc_sglq *sglq; - adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base; - if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri) - return NULL; - sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri]; - phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = NULL; + + sglq = phba->sli4_hba.lpfc_sglq_active_list[xritag]; + phba->sli4_hba.lpfc_sglq_active_list[xritag] = NULL; return sglq; } @@ -507,12 +503,9 @@ __lpfc_clear_active_sglq(struct lpfc_hba *phba, uint16_t xritag) struct lpfc_sglq * __lpfc_get_active_sglq(struct lpfc_hba *phba, uint16_t xritag) { - uint16_t adj_xri; struct lpfc_sglq *sglq; - adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base; - if (adj_xri > phba->sli4_hba.max_cfg_param.max_xri) - return NULL; - sglq = phba->sli4_hba.lpfc_sglq_active_list[adj_xri]; + + sglq = phba->sli4_hba.lpfc_sglq_active_list[xritag]; return sglq; } @@ -535,7 +528,6 @@ static int __lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, uint16_t xritag, uint16_t rxid, uint16_t send_rrq) { - uint16_t adj_xri; struct lpfc_node_rrq *rrq; int empty; uint32_t did = 0; @@ -556,21 +548,19 @@ __lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, /* * set the active bit even if there is no mem available. */ - adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base; - if (NLP_CHK_FREE_REQ(ndlp)) goto out; if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING)) goto out; - if (test_and_set_bit(adj_xri, ndlp->active_rrqs.xri_bitmap)) + if (test_and_set_bit(xritag, ndlp->active_rrqs.xri_bitmap)) goto out; rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL); if (rrq) { rrq->send_rrq = send_rrq; - rrq->xritag = xritag; + rrq->xritag = phba->sli4_hba.xri_ids[xritag]; rrq->rrq_stop_time = jiffies + HZ * (phba->fc_ratov + 1); rrq->ndlp = ndlp; rrq->nlp_DID = ndlp->nlp_DID; @@ -606,7 +596,6 @@ lpfc_clr_rrq_active(struct lpfc_hba *phba, uint16_t xritag, struct lpfc_node_rrq *rrq) { - uint16_t adj_xri; struct lpfc_nodelist *ndlp = NULL; if ((rrq->vport) && NLP_CHK_NODE_ACT(rrq->ndlp)) @@ -622,8 +611,7 @@ lpfc_clr_rrq_active(struct lpfc_hba *phba, if (!ndlp) goto out; - adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base; - if (test_and_clear_bit(adj_xri, ndlp->active_rrqs.xri_bitmap)) { + if (test_and_clear_bit(xritag, ndlp->active_rrqs.xri_bitmap)) { rrq->send_rrq = 0; rrq->xritag = 0; rrq->rrq_stop_time = 0; @@ -799,12 +787,9 @@ int lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, uint16_t xritag) { - uint16_t adj_xri; - - adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base; if (!ndlp) return 0; - if (test_bit(adj_xri, ndlp->active_rrqs.xri_bitmap)) + if (test_bit(xritag, ndlp->active_rrqs.xri_bitmap)) return 1; else return 0; @@ -844,7 +829,7 @@ lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp, * @piocb: Pointer to the iocbq. * * This function is called with hbalock held. This function - * Gets a new driver sglq object from the sglq list. If the + * gets a new driver sglq object from the sglq list. If the * list is not empty then it is successful, it returns pointer to the newly * allocated sglq object else it returns NULL. **/ @@ -854,7 +839,6 @@ __lpfc_sli_get_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq) struct list_head *lpfc_sgl_list = &phba->sli4_hba.lpfc_sgl_list; struct lpfc_sglq *sglq = NULL; struct lpfc_sglq *start_sglq = NULL; - uint16_t adj_xri; struct lpfc_scsi_buf *lpfc_cmd; struct lpfc_nodelist *ndlp; int found = 0; @@ -873,8 +857,6 @@ __lpfc_sli_get_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq) while (!found) { if (!sglq) return NULL; - adj_xri = sglq->sli4_xritag - - phba->sli4_hba.max_cfg_param.xri_base; if (lpfc_test_rrq_active(phba, ndlp, sglq->sli4_xritag)) { /* This xri has an rrq outstanding for this DID. * put it back in the list and get another xri. @@ -891,7 +873,7 @@ __lpfc_sli_get_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq) } sglq->ndlp = ndlp; found = 1; - phba->sli4_hba.lpfc_sglq_active_list[adj_xri] = sglq; + phba->sli4_hba.lpfc_sglq_active_list[sglq->sli4_lxritag] = sglq; sglq->state = SGL_ALLOCATED; } return sglq; @@ -947,7 +929,8 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) if (iocbq->sli4_xritag == NO_XRI) sglq = NULL; else - sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_xritag); + sglq = __lpfc_clear_active_sglq(phba, iocbq->sli4_lxritag); + if (sglq) { if ((iocbq->iocb_flag & LPFC_EXCHANGE_BUSY) && (sglq->state != SGL_XRI_ABORTED)) { @@ -974,6 +957,7 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq) * Clean all volatile data fields, preserve iotag and node struct. */ memset((char *)iocbq + start_clean, 0, sizeof(*iocbq) - start_clean); + iocbq->sli4_lxritag = NO_XRI; iocbq->sli4_xritag = NO_XRI; list_add_tail(&iocbq->list, &phba->lpfc_iocb_list); } @@ -2116,7 +2100,7 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb) pmb->u.mb.mbxCommand == MBX_REG_LOGIN64 && !pmb->u.mb.mbxStatus) { rpi = pmb->u.mb.un.varWords[0]; - vpi = pmb->u.mb.un.varRegLogin.vpi - phba->vpi_base; + vpi = pmb->u.mb.un.varRegLogin.vpi; lpfc_unreg_login(phba, vpi, rpi, pmb); pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl; rc = lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT); @@ -4323,6 +4307,7 @@ lpfc_sli_config_port(struct lpfc_hba *phba, int sli_mode) continue; } else if (rc) break; + phba->link_state = LPFC_INIT_MBX_CMDS; lpfc_config_port(phba, pmb); rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL); @@ -4426,7 +4411,8 @@ int lpfc_sli_hba_setup(struct lpfc_hba *phba) { uint32_t rc; - int mode = 3; + int mode = 3, i; + int longs; switch (lpfc_sli_mode) { case 2: @@ -4496,6 +4482,35 @@ lpfc_sli_hba_setup(struct lpfc_hba *phba) if (rc) goto lpfc_sli_hba_setup_error; + /* Initialize VPIs. */ + if (phba->sli_rev == LPFC_SLI_REV3) { + /* + * The VPI bitmask and physical ID array are allocated + * and initialized once only - at driver load. A port + * reset doesn't need to reinitialize this memory. + */ + if ((phba->vpi_bmask == NULL) && (phba->vpi_ids == NULL)) { + longs = (phba->max_vpi + BITS_PER_LONG) / BITS_PER_LONG; + phba->vpi_bmask = kzalloc(longs * sizeof(unsigned long), + GFP_KERNEL); + if (!phba->vpi_bmask) { + rc = -ENOMEM; + goto lpfc_sli_hba_setup_error; + } + + phba->vpi_ids = kzalloc( + (phba->max_vpi+1) * sizeof(uint16_t), + GFP_KERNEL); + if (!phba->vpi_ids) { + kfree(phba->vpi_bmask); + rc = -ENOMEM; + goto lpfc_sli_hba_setup_error; + } + for (i = 0; i < phba->max_vpi; i++) + phba->vpi_ids[i] = i; + } + } + /* Init HBQs */ if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) { rc = lpfc_sli_hbq_setup(phba); @@ -4693,6 +4708,803 @@ lpfc_sli4_arm_cqeq_intr(struct lpfc_hba *phba) LPFC_QUEUE_REARM); } +/** + * lpfc_sli4_get_avail_extnt_rsrc - Get available resource extent count. + * @phba: Pointer to HBA context object. + * @type: The resource extent type. + * + * This function allocates all SLI4 resource identifiers. + **/ +static int +lpfc_sli4_get_avail_extnt_rsrc(struct lpfc_hba *phba, uint16_t type, + uint16_t *extnt_count, uint16_t *extnt_size) +{ + int rc = 0; + uint32_t length; + uint32_t mbox_tmo; + struct lpfc_mbx_get_rsrc_extent_info *rsrc_info; + LPFC_MBOXQ_t *mbox; + + mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + + /* Find out how many extents are available for this resource type */ + length = (sizeof(struct lpfc_mbx_get_rsrc_extent_info) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO, + length, LPFC_SLI4_MBX_EMBED); + + /* Send an extents count of 0 - the GET doesn't use it. */ + rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, 0, type, + LPFC_SLI4_MBX_EMBED); + if (unlikely(rc)) { + rc = -EIO; + goto err_exit; + } + + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + if (unlikely(rc)) { + rc = -EIO; + goto err_exit; + } + + rsrc_info = &mbox->u.mqe.un.rsrc_extent_info; + if (bf_get(lpfc_mbox_hdr_status, + &rsrc_info->header.cfg_shdr.response)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT, + "2930 Failed to get resource extents " + "Status 0x%x Add'l Status 0x%x\n", + bf_get(lpfc_mbox_hdr_status, + &rsrc_info->header.cfg_shdr.response), + bf_get(lpfc_mbox_hdr_add_status, + &rsrc_info->header.cfg_shdr.response)); + rc = -EIO; + goto err_exit; + } + + *extnt_count = bf_get(lpfc_mbx_get_rsrc_extent_info_cnt, + &rsrc_info->u.rsp); + *extnt_size = bf_get(lpfc_mbx_get_rsrc_extent_info_size, + &rsrc_info->u.rsp); + err_exit: + mempool_free(mbox, phba->mbox_mem_pool); + return rc; +} + +/** + * lpfc_sli4_chk_avail_extnt_rsrc - Check for available SLI4 resource extents. + * @phba: Pointer to HBA context object. + * @type: The extent type to check. + * + * This function reads the current available extents from the port and checks + * if the extent count or extent size has changed since the last access. + * Callers use this routine post port reset to understand if there is a + * extent reprovisioning requirement. + * + * Returns: + * -Error: error indicates problem. + * 1: Extent count or size has changed. + * 0: No changes. + **/ +static int +lpfc_sli4_chk_avail_extnt_rsrc(struct lpfc_hba *phba, uint16_t type) +{ + uint16_t curr_ext_cnt, rsrc_ext_cnt; + uint16_t size_diff, rsrc_ext_size; + int rc = 0; + struct lpfc_rsrc_blks *rsrc_entry; + struct list_head *rsrc_blk_list = NULL; + + size_diff = 0; + curr_ext_cnt = 0; + rc = lpfc_sli4_get_avail_extnt_rsrc(phba, type, + &rsrc_ext_cnt, + &rsrc_ext_size); + if (unlikely(rc)) + return -EIO; + + switch (type) { + case LPFC_RSC_TYPE_FCOE_RPI: + rsrc_blk_list = &phba->sli4_hba.lpfc_rpi_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_VPI: + rsrc_blk_list = &phba->lpfc_vpi_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_XRI: + rsrc_blk_list = &phba->sli4_hba.lpfc_xri_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_VFI: + rsrc_blk_list = &phba->sli4_hba.lpfc_vfi_blk_list; + break; + default: + break; + } + + list_for_each_entry(rsrc_entry, rsrc_blk_list, list) { + curr_ext_cnt++; + if (rsrc_entry->rsrc_size != rsrc_ext_size) + size_diff++; + } + + if (curr_ext_cnt != rsrc_ext_cnt || size_diff != 0) + rc = 1; + + return rc; +} + +/** + * lpfc_sli4_cfg_post_extnts - + * @phba: Pointer to HBA context object. + * @extnt_cnt - number of available extents. + * @type - the extent type (rpi, xri, vfi, vpi). + * @emb - buffer to hold either MBX_EMBED or MBX_NEMBED operation. + * @mbox - pointer to the caller's allocated mailbox structure. + * + * This function executes the extents allocation request. It also + * takes care of the amount of memory needed to allocate or get the + * allocated extents. It is the caller's responsibility to evaluate + * the response. + * + * Returns: + * -Error: Error value describes the condition found. + * 0: if successful + **/ +static int +lpfc_sli4_cfg_post_extnts(struct lpfc_hba *phba, uint16_t *extnt_cnt, + uint16_t type, bool *emb, LPFC_MBOXQ_t *mbox) +{ + int rc = 0; + uint32_t req_len; + uint32_t emb_len; + uint32_t alloc_len, mbox_tmo; + + /* Calculate the total requested length of the dma memory */ + req_len = *extnt_cnt * sizeof(uint16_t); + + /* + * Calculate the size of an embedded mailbox. The uint32_t + * accounts for extents-specific word. + */ + emb_len = sizeof(MAILBOX_t) - sizeof(struct mbox_header) - + sizeof(uint32_t); + + /* + * Presume the allocation and response will fit into an embedded + * mailbox. If not true, reconfigure to a non-embedded mailbox. + */ + *emb = LPFC_SLI4_MBX_EMBED; + if (req_len > emb_len) { + req_len = *extnt_cnt * sizeof(uint16_t) + + sizeof(union lpfc_sli4_cfg_shdr) + + sizeof(uint32_t); + *emb = LPFC_SLI4_MBX_NEMBED; + } + + alloc_len = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_ALLOC_RSRC_EXTENT, + req_len, *emb); + if (alloc_len < req_len) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "9000 Allocated DMA memory size (x%x) is " + "less than the requested DMA memory " + "size (x%x)\n", alloc_len, req_len); + return -ENOMEM; + } + rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, *extnt_cnt, type, *emb); + if (unlikely(rc)) + return -EIO; + + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + + if (unlikely(rc)) + rc = -EIO; + return rc; +} + +/** + * lpfc_sli4_alloc_extent - Allocate an SLI4 resource extent. + * @phba: Pointer to HBA context object. + * @type: The resource extent type to allocate. + * + * This function allocates the number of elements for the specified + * resource type. + **/ +static int +lpfc_sli4_alloc_extent(struct lpfc_hba *phba, uint16_t type) +{ + bool emb = false; + uint16_t rsrc_id_cnt, rsrc_cnt, rsrc_size; + uint16_t rsrc_id, rsrc_start, j, k; + uint16_t *ids; + int i, rc; + unsigned long longs; + unsigned long *bmask; + struct lpfc_rsrc_blks *rsrc_blks; + LPFC_MBOXQ_t *mbox; + uint32_t length; + struct lpfc_id_range *id_array = NULL; + void *virtaddr = NULL; + struct lpfc_mbx_nembed_rsrc_extent *n_rsrc; + struct lpfc_mbx_alloc_rsrc_extents *rsrc_ext; + struct list_head *ext_blk_list; + + rc = lpfc_sli4_get_avail_extnt_rsrc(phba, type, + &rsrc_cnt, + &rsrc_size); + if (unlikely(rc)) + return -EIO; + + if ((rsrc_cnt == 0) || (rsrc_size == 0)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT, + "3009 No available Resource Extents " + "for resource type 0x%x: Count: 0x%x, " + "Size 0x%x\n", type, rsrc_cnt, + rsrc_size); + return -ENOMEM; + } + + lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_INIT, + "2903 Available Resource Extents " + "for resource type 0x%x: Count: 0x%x, " + "Size 0x%x\n", type, rsrc_cnt, + rsrc_size); + + mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + + rc = lpfc_sli4_cfg_post_extnts(phba, &rsrc_cnt, type, &emb, mbox); + if (unlikely(rc)) { + rc = -EIO; + goto err_exit; + } + + /* + * Figure out where the response is located. Then get local pointers + * to the response data. The port does not guarantee to respond to + * all extents counts request so update the local variable with the + * allocated count from the port. + */ + if (emb == LPFC_SLI4_MBX_EMBED) { + rsrc_ext = &mbox->u.mqe.un.alloc_rsrc_extents; + id_array = &rsrc_ext->u.rsp.id[0]; + rsrc_cnt = bf_get(lpfc_mbx_rsrc_cnt, &rsrc_ext->u.rsp); + } else { + virtaddr = mbox->sge_array->addr[0]; + n_rsrc = (struct lpfc_mbx_nembed_rsrc_extent *) virtaddr; + rsrc_cnt = bf_get(lpfc_mbx_rsrc_cnt, n_rsrc); + id_array = &n_rsrc->id; + } + + longs = ((rsrc_cnt * rsrc_size) + BITS_PER_LONG - 1) / BITS_PER_LONG; + rsrc_id_cnt = rsrc_cnt * rsrc_size; + + /* + * Based on the resource size and count, correct the base and max + * resource values. + */ + length = sizeof(struct lpfc_rsrc_blks); + switch (type) { + case LPFC_RSC_TYPE_FCOE_RPI: + phba->sli4_hba.rpi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.rpi_bmask)) { + rc = -ENOMEM; + goto err_exit; + } + phba->sli4_hba.rpi_ids = kzalloc(rsrc_id_cnt * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.rpi_ids)) { + kfree(phba->sli4_hba.rpi_bmask); + rc = -ENOMEM; + goto err_exit; + } + + /* + * The next_rpi was initialized with the maximum available + * count but the port may allocate a smaller number. Catch + * that case and update the next_rpi. + */ + phba->sli4_hba.next_rpi = rsrc_id_cnt; + + /* Initialize local ptrs for common extent processing later. */ + bmask = phba->sli4_hba.rpi_bmask; + ids = phba->sli4_hba.rpi_ids; + ext_blk_list = &phba->sli4_hba.lpfc_rpi_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_VPI: + phba->vpi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->vpi_bmask)) { + rc = -ENOMEM; + goto err_exit; + } + phba->vpi_ids = kzalloc(rsrc_id_cnt * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->vpi_ids)) { + kfree(phba->vpi_bmask); + rc = -ENOMEM; + goto err_exit; + } + + /* Initialize local ptrs for common extent processing later. */ + bmask = phba->vpi_bmask; + ids = phba->vpi_ids; + ext_blk_list = &phba->lpfc_vpi_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_XRI: + phba->sli4_hba.xri_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.xri_bmask)) { + rc = -ENOMEM; + goto err_exit; + } + phba->sli4_hba.xri_ids = kzalloc(rsrc_id_cnt * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.xri_ids)) { + kfree(phba->sli4_hba.xri_bmask); + rc = -ENOMEM; + goto err_exit; + } + + /* Initialize local ptrs for common extent processing later. */ + bmask = phba->sli4_hba.xri_bmask; + ids = phba->sli4_hba.xri_ids; + ext_blk_list = &phba->sli4_hba.lpfc_xri_blk_list; + break; + case LPFC_RSC_TYPE_FCOE_VFI: + phba->sli4_hba.vfi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.vfi_bmask)) { + rc = -ENOMEM; + goto err_exit; + } + phba->sli4_hba.vfi_ids = kzalloc(rsrc_id_cnt * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.vfi_ids)) { + kfree(phba->sli4_hba.vfi_bmask); + rc = -ENOMEM; + goto err_exit; + } + + /* Initialize local ptrs for common extent processing later. */ + bmask = phba->sli4_hba.vfi_bmask; + ids = phba->sli4_hba.vfi_ids; + ext_blk_list = &phba->sli4_hba.lpfc_vfi_blk_list; + break; + default: + /* Unsupported Opcode. Fail call. */ + id_array = NULL; + bmask = NULL; + ids = NULL; + ext_blk_list = NULL; + goto err_exit; + } + + /* + * Complete initializing the extent configuration with the + * allocated ids assigned to this function. The bitmask serves + * as an index into the array and manages the available ids. The + * array just stores the ids communicated to the port via the wqes. + */ + for (i = 0, j = 0, k = 0; i < rsrc_cnt; i++) { + if ((i % 2) == 0) + rsrc_id = bf_get(lpfc_mbx_rsrc_id_word4_0, + &id_array[k]); + else + rsrc_id = bf_get(lpfc_mbx_rsrc_id_word4_1, + &id_array[k]); + + rsrc_blks = kzalloc(length, GFP_KERNEL); + if (unlikely(!rsrc_blks)) { + rc = -ENOMEM; + kfree(bmask); + kfree(ids); + goto err_exit; + } + rsrc_blks->rsrc_start = rsrc_id; + rsrc_blks->rsrc_size = rsrc_size; + list_add_tail(&rsrc_blks->list, ext_blk_list); + rsrc_start = rsrc_id; + if ((type == LPFC_RSC_TYPE_FCOE_XRI) && (j == 0)) + phba->sli4_hba.scsi_xri_start = rsrc_start + + lpfc_sli4_get_els_iocb_cnt(phba); + + while (rsrc_id < (rsrc_start + rsrc_size)) { + ids[j] = rsrc_id; + rsrc_id++; + j++; + } + /* Entire word processed. Get next word.*/ + if ((i % 2) == 1) + k++; + } + err_exit: + lpfc_sli4_mbox_cmd_free(phba, mbox); + return rc; +} + +/** + * lpfc_sli4_dealloc_extent - Deallocate an SLI4 resource extent. + * @phba: Pointer to HBA context object. + * @type: the extent's type. + * + * This function deallocates all extents of a particular resource type. + * SLI4 does not allow for deallocating a particular extent range. It + * is the caller's responsibility to release all kernel memory resources. + **/ +static int +lpfc_sli4_dealloc_extent(struct lpfc_hba *phba, uint16_t type) +{ + int rc; + uint32_t length, mbox_tmo = 0; + LPFC_MBOXQ_t *mbox; + struct lpfc_mbx_dealloc_rsrc_extents *dealloc_rsrc; + struct lpfc_rsrc_blks *rsrc_blk, *rsrc_blk_next; + + mbox = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + + /* + * This function sends an embedded mailbox because it only sends the + * the resource type. All extents of this type are released by the + * port. + */ + length = (sizeof(struct lpfc_mbx_dealloc_rsrc_extents) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_COMMON, + LPFC_MBOX_OPCODE_DEALLOC_RSRC_EXTENT, + length, LPFC_SLI4_MBX_EMBED); + + /* Send an extents count of 0 - the dealloc doesn't use it. */ + rc = lpfc_sli4_mbox_rsrc_extent(phba, mbox, 0, type, + LPFC_SLI4_MBX_EMBED); + if (unlikely(rc)) { + rc = -EIO; + goto out_free_mbox; + } + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, mbox_tmo); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + if (unlikely(rc)) { + rc = -EIO; + goto out_free_mbox; + } + + dealloc_rsrc = &mbox->u.mqe.un.dealloc_rsrc_extents; + if (bf_get(lpfc_mbox_hdr_status, + &dealloc_rsrc->header.cfg_shdr.response)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_INIT, + "2919 Failed to release resource extents " + "for type %d - Status 0x%x Add'l Status 0x%x. " + "Resource memory not released.\n", + type, + bf_get(lpfc_mbox_hdr_status, + &dealloc_rsrc->header.cfg_shdr.response), + bf_get(lpfc_mbox_hdr_add_status, + &dealloc_rsrc->header.cfg_shdr.response)); + rc = -EIO; + goto out_free_mbox; + } + + /* Release kernel memory resources for the specific type. */ + switch (type) { + case LPFC_RSC_TYPE_FCOE_VPI: + kfree(phba->vpi_bmask); + kfree(phba->vpi_ids); + bf_set(lpfc_vpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + list_for_each_entry_safe(rsrc_blk, rsrc_blk_next, + &phba->lpfc_vpi_blk_list, list) { + list_del_init(&rsrc_blk->list); + kfree(rsrc_blk); + } + break; + case LPFC_RSC_TYPE_FCOE_XRI: + kfree(phba->sli4_hba.xri_bmask); + kfree(phba->sli4_hba.xri_ids); + bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + list_for_each_entry_safe(rsrc_blk, rsrc_blk_next, + &phba->sli4_hba.lpfc_xri_blk_list, list) { + list_del_init(&rsrc_blk->list); + kfree(rsrc_blk); + } + break; + case LPFC_RSC_TYPE_FCOE_VFI: + kfree(phba->sli4_hba.vfi_bmask); + kfree(phba->sli4_hba.vfi_ids); + bf_set(lpfc_vfi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + list_for_each_entry_safe(rsrc_blk, rsrc_blk_next, + &phba->sli4_hba.lpfc_vfi_blk_list, list) { + list_del_init(&rsrc_blk->list); + kfree(rsrc_blk); + } + break; + case LPFC_RSC_TYPE_FCOE_RPI: + /* RPI bitmask and physical id array are cleaned up earlier. */ + list_for_each_entry_safe(rsrc_blk, rsrc_blk_next, + &phba->sli4_hba.lpfc_rpi_blk_list, list) { + list_del_init(&rsrc_blk->list); + kfree(rsrc_blk); + } + break; + default: + break; + } + + bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + + out_free_mbox: + mempool_free(mbox, phba->mbox_mem_pool); + return rc; +} + +/** + * lpfc_sli4_alloc_resource_identifiers - Allocate all SLI4 resource extents. + * @phba: Pointer to HBA context object. + * + * This function allocates all SLI4 resource identifiers. + **/ +int +lpfc_sli4_alloc_resource_identifiers(struct lpfc_hba *phba) +{ + int i, rc, error = 0; + uint16_t count, base; + unsigned long longs; + + if (phba->sli4_hba.extents_in_use) { + /* + * The port supports resource extents. The XRI, VPI, VFI, RPI + * resource extent count must be read and allocated before + * provisioning the resource id arrays. + */ + if (bf_get(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags) == + LPFC_IDX_RSRC_RDY) { + /* + * Extent-based resources are set - the driver could + * be in a port reset. Figure out if any corrective + * actions need to be taken. + */ + rc = lpfc_sli4_chk_avail_extnt_rsrc(phba, + LPFC_RSC_TYPE_FCOE_VFI); + if (rc != 0) + error++; + rc = lpfc_sli4_chk_avail_extnt_rsrc(phba, + LPFC_RSC_TYPE_FCOE_VPI); + if (rc != 0) + error++; + rc = lpfc_sli4_chk_avail_extnt_rsrc(phba, + LPFC_RSC_TYPE_FCOE_XRI); + if (rc != 0) + error++; + rc = lpfc_sli4_chk_avail_extnt_rsrc(phba, + LPFC_RSC_TYPE_FCOE_RPI); + if (rc != 0) + error++; + + /* + * It's possible that the number of resources + * provided to this port instance changed between + * resets. Detect this condition and reallocate + * resources. Otherwise, there is no action. + */ + if (error) { + lpfc_printf_log(phba, KERN_INFO, + LOG_MBOX | LOG_INIT, + "2931 Detected extent resource " + "change. Reallocating all " + "extents.\n"); + rc = lpfc_sli4_dealloc_extent(phba, + LPFC_RSC_TYPE_FCOE_VFI); + rc = lpfc_sli4_dealloc_extent(phba, + LPFC_RSC_TYPE_FCOE_VPI); + rc = lpfc_sli4_dealloc_extent(phba, + LPFC_RSC_TYPE_FCOE_XRI); + rc = lpfc_sli4_dealloc_extent(phba, + LPFC_RSC_TYPE_FCOE_RPI); + } else + return 0; + } + + rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_VFI); + if (unlikely(rc)) + goto err_exit; + + rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_VPI); + if (unlikely(rc)) + goto err_exit; + + rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_RPI); + if (unlikely(rc)) + goto err_exit; + + rc = lpfc_sli4_alloc_extent(phba, LPFC_RSC_TYPE_FCOE_XRI); + if (unlikely(rc)) + goto err_exit; + bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, + LPFC_IDX_RSRC_RDY); + return rc; + } else { + /* + * The port does not support resource extents. The XRI, VPI, + * VFI, RPI resource ids were determined from READ_CONFIG. + * Just allocate the bitmasks and provision the resource id + * arrays. If a port reset is active, the resources don't + * need any action - just exit. + */ + if (bf_get(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags) == + LPFC_IDX_RSRC_RDY) + return 0; + + /* RPIs. */ + count = phba->sli4_hba.max_cfg_param.max_rpi; + base = phba->sli4_hba.max_cfg_param.rpi_base; + longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG; + phba->sli4_hba.rpi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.rpi_bmask)) { + rc = -ENOMEM; + goto err_exit; + } + phba->sli4_hba.rpi_ids = kzalloc(count * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.rpi_ids)) { + rc = -ENOMEM; + goto free_rpi_bmask; + } + + for (i = 0; i < count; i++) + phba->sli4_hba.rpi_ids[i] = base + i; + + /* VPIs. */ + count = phba->sli4_hba.max_cfg_param.max_vpi; + base = phba->sli4_hba.max_cfg_param.vpi_base; + longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG; + phba->vpi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->vpi_bmask)) { + rc = -ENOMEM; + goto free_rpi_ids; + } + phba->vpi_ids = kzalloc(count * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->vpi_ids)) { + rc = -ENOMEM; + goto free_vpi_bmask; + } + + for (i = 0; i < count; i++) + phba->vpi_ids[i] = base + i; + + /* XRIs. */ + count = phba->sli4_hba.max_cfg_param.max_xri; + base = phba->sli4_hba.max_cfg_param.xri_base; + longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG; + phba->sli4_hba.xri_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.xri_bmask)) { + rc = -ENOMEM; + goto free_vpi_ids; + } + phba->sli4_hba.xri_ids = kzalloc(count * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.xri_ids)) { + rc = -ENOMEM; + goto free_xri_bmask; + } + + for (i = 0; i < count; i++) + phba->sli4_hba.xri_ids[i] = base + i; + + /* VFIs. */ + count = phba->sli4_hba.max_cfg_param.max_vfi; + base = phba->sli4_hba.max_cfg_param.vfi_base; + longs = (count + BITS_PER_LONG - 1) / BITS_PER_LONG; + phba->sli4_hba.vfi_bmask = kzalloc(longs * + sizeof(unsigned long), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.vfi_bmask)) { + rc = -ENOMEM; + goto free_xri_ids; + } + phba->sli4_hba.vfi_ids = kzalloc(count * + sizeof(uint16_t), + GFP_KERNEL); + if (unlikely(!phba->sli4_hba.vfi_ids)) { + rc = -ENOMEM; + goto free_vfi_bmask; + } + + for (i = 0; i < count; i++) + phba->sli4_hba.vfi_ids[i] = base + i; + + /* + * Mark all resources ready. An HBA reset doesn't need + * to reset the initialization. + */ + bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, + LPFC_IDX_RSRC_RDY); + return 0; + } + + free_vfi_bmask: + kfree(phba->sli4_hba.vfi_bmask); + free_xri_ids: + kfree(phba->sli4_hba.xri_ids); + free_xri_bmask: + kfree(phba->sli4_hba.xri_bmask); + free_vpi_ids: + kfree(phba->vpi_ids); + free_vpi_bmask: + kfree(phba->vpi_bmask); + free_rpi_ids: + kfree(phba->sli4_hba.rpi_ids); + free_rpi_bmask: + kfree(phba->sli4_hba.rpi_bmask); + err_exit: + return rc; +} + +/** + * lpfc_sli4_dealloc_resource_identifiers - Deallocate all SLI4 resource extents. + * @phba: Pointer to HBA context object. + * + * This function allocates the number of elements for the specified + * resource type. + **/ +int +lpfc_sli4_dealloc_resource_identifiers(struct lpfc_hba *phba) +{ + if (phba->sli4_hba.extents_in_use) { + lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_VPI); + lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_RPI); + lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_XRI); + lpfc_sli4_dealloc_extent(phba, LPFC_RSC_TYPE_FCOE_VFI); + } else { + kfree(phba->vpi_bmask); + kfree(phba->vpi_ids); + bf_set(lpfc_vpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + kfree(phba->sli4_hba.xri_bmask); + kfree(phba->sli4_hba.xri_ids); + bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + kfree(phba->sli4_hba.vfi_bmask); + kfree(phba->sli4_hba.vfi_ids); + bf_set(lpfc_vfi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + bf_set(lpfc_idx_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); + } + + return 0; +} + /** * lpfc_sli4_hba_setup - SLI4 device intialization PCI function * @phba: Pointer to HBA context object. @@ -4715,10 +5527,6 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) struct lpfc_vport *vport = phba->pport; struct lpfc_dmabuf *mp; - /* - * TODO: Why does this routine execute these task in a different - * order from probe? - */ /* Perform a PCI function reset to start from clean */ rc = lpfc_pci_function_reset(phba); if (unlikely(rc)) @@ -4880,6 +5688,18 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) phba->sli3_options |= (LPFC_SLI3_NPIV_ENABLED | LPFC_SLI3_HBQ_ENABLED); spin_unlock_irq(&phba->hbalock); + /* + * Allocate all resources (xri,rpi,vpi,vfi) now. Subsequent + * calls depends on these resources to complete port setup. + */ + rc = lpfc_sli4_alloc_resource_identifiers(phba); + if (rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "2920 Failed to alloc Resource IDs " + "rc = x%x\n", rc); + goto out_free_mbox; + } + /* Read the port's service parameters. */ rc = lpfc_read_sparam(phba, mboxq, vport->vpi); if (rc) { @@ -4920,19 +5740,30 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba) fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn); /* Register SGL pool to the device using non-embedded mailbox command */ - rc = lpfc_sli4_post_sgl_list(phba); - if (unlikely(rc)) { - lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, - "0582 Error %d during sgl post operation\n", - rc); - rc = -ENODEV; - goto out_free_mbox; + if (!phba->sli4_hba.extents_in_use) { + rc = lpfc_sli4_post_els_sgl_list(phba); + if (unlikely(rc)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "0582 Error %d during els sgl post " + "operation\n", rc); + rc = -ENODEV; + goto out_free_mbox; + } + } else { + rc = lpfc_sli4_post_els_sgl_list_ext(phba); + if (unlikely(rc)) { + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, + "2560 Error %d during els sgl post " + "operation\n", rc); + rc = -ENODEV; + goto out_free_mbox; + } } /* Register SCSI SGL pool to the device */ rc = lpfc_sli4_repost_scsi_sgl_list(phba); if (unlikely(rc)) { - lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX | LOG_SLI, + lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI, "0383 Error %d during scsi sgl post " "operation\n", rc); /* Some Scsi buffers were moved to the abort scsi list */ @@ -6479,7 +7310,8 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, els_id = ((iocbq->iocb_flag & LPFC_FIP_ELS_ID_MASK) >> LPFC_FIP_ELS_ID_SHIFT); } - bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com, ndlp->nlp_rpi); + bf_set(wqe_temp_rpi, &wqe->els_req.wqe_com, + phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); bf_set(wqe_els_id, &wqe->els_req.wqe_com, els_id); bf_set(wqe_dbde, &wqe->els_req.wqe_com, 1); bf_set(wqe_iod, &wqe->els_req.wqe_com, LPFC_WQE_IOD_READ); @@ -6628,14 +7460,15 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, iocbq->iocb.ulpContext); if (!iocbq->iocb.ulpCt_h && iocbq->iocb.ulpCt_l) bf_set(wqe_ctxt_tag, &wqe->xmit_els_rsp.wqe_com, - iocbq->vport->vpi + phba->vpi_base); + phba->vpi_ids[iocbq->vport->vpi]); bf_set(wqe_dbde, &wqe->xmit_els_rsp.wqe_com, 1); bf_set(wqe_iod, &wqe->xmit_els_rsp.wqe_com, LPFC_WQE_IOD_WRITE); bf_set(wqe_qosd, &wqe->xmit_els_rsp.wqe_com, 1); bf_set(wqe_lenloc, &wqe->xmit_els_rsp.wqe_com, LPFC_WQE_LENLOC_WORD3); bf_set(wqe_ebde_cnt, &wqe->xmit_els_rsp.wqe_com, 0); - bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp, ndlp->nlp_rpi); + bf_set(wqe_rsp_temp_rpi, &wqe->xmit_els_rsp, + phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]); command_type = OTHER_COMMAND; break; case CMD_CLOSE_XRI_CN: @@ -6734,6 +7567,7 @@ lpfc_sli4_iocb2wqe(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq, return IOCB_ERROR; break; } + bf_set(wqe_xri_tag, &wqe->generic.wqe_com, xritag); bf_set(wqe_reqtag, &wqe->generic.wqe_com, iocbq->iotag); wqe->generic.wqe_com.abort_tag = abort_tag; @@ -6781,7 +7615,7 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number, return IOCB_BUSY; } } else { - sglq = __lpfc_sli_get_sglq(phba, piocb); + sglq = __lpfc_sli_get_sglq(phba, piocb); if (!sglq) { if (!(flag & SLI_IOCB_RET_IOCB)) { __lpfc_sli_ringtx_put(phba, @@ -6794,11 +7628,11 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number, } } } else if (piocb->iocb_flag & LPFC_IO_FCP) { - sglq = NULL; /* These IO's already have an XRI and - * a mapped sgl. - */ + /* These IO's already have an XRI and a mapped sgl. */ + sglq = NULL; } else { - /* This is a continuation of a commandi,(CX) so this + /* + * This is a continuation of a commandi,(CX) so this * sglq is on the active list */ sglq = __lpfc_get_active_sglq(phba, piocb->sli4_xritag); @@ -6807,8 +7641,8 @@ __lpfc_sli_issue_iocb_s4(struct lpfc_hba *phba, uint32_t ring_number, } if (sglq) { + piocb->sli4_lxritag = sglq->sli4_lxritag; piocb->sli4_xritag = sglq->sli4_xritag; - if (NO_XRI == lpfc_sli4_bpl2sgl(phba, piocb, sglq)) return IOCB_ERROR; } @@ -11456,6 +12290,7 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba, LPFC_MBOXQ_t *mbox; int rc; uint32_t shdr_status, shdr_add_status; + uint32_t mbox_tmo; union lpfc_sli4_cfg_shdr *shdr; if (xritag == NO_XRI) { @@ -11489,8 +12324,10 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba, cpu_to_le32(putPaddrHigh(pdma_phys_addr1)); if (!phba->sli4_hba.intr_enable) rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); - else - rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } /* The IOCTL status is embedded in the mailbox subheader. */ shdr = (union lpfc_sli4_cfg_shdr *) &post_sgl_pages->header.cfg_shdr; shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); @@ -11507,6 +12344,76 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba, return 0; } +/** + * lpfc_sli4_init_rpi_hdrs - Post the rpi header memory region to the port + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to post rpi header templates to the + * port for those SLI4 ports that do not support extents. This routine + * posts a PAGE_SIZE memory region to the port to hold up to + * PAGE_SIZE modulo 64 rpi context headers. This is an initialization routine + * and should be called only when interrupts are disabled. + * + * Return codes + * 0 - successful + * -ERROR - otherwise. + */ +uint16_t +lpfc_sli4_alloc_xri(struct lpfc_hba *phba) +{ + unsigned long xri; + + /* + * Fetch the next logical xri. Because this index is logical, + * the driver starts at 0 each time. + */ + spin_lock_irq(&phba->hbalock); + xri = find_next_zero_bit(phba->sli4_hba.xri_bmask, + phba->sli4_hba.max_cfg_param.max_xri, 0); + if (xri >= phba->sli4_hba.max_cfg_param.max_xri) { + spin_unlock_irq(&phba->hbalock); + return NO_XRI; + } else { + set_bit(xri, phba->sli4_hba.xri_bmask); + phba->sli4_hba.max_cfg_param.xri_used++; + phba->sli4_hba.xri_count++; + } + + spin_unlock_irq(&phba->hbalock); + return xri; +} + +/** + * lpfc_sli4_free_xri - Release an xri for reuse. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to release an xri to the pool of + * available rpis maintained by the driver. + **/ +void +__lpfc_sli4_free_xri(struct lpfc_hba *phba, int xri) +{ + if (test_and_clear_bit(xri, phba->sli4_hba.xri_bmask)) { + phba->sli4_hba.xri_count--; + phba->sli4_hba.max_cfg_param.xri_used--; + } +} + +/** + * lpfc_sli4_free_xri - Release an xri for reuse. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to release an xri to the pool of + * available rpis maintained by the driver. + **/ +void +lpfc_sli4_free_xri(struct lpfc_hba *phba, int xri) +{ + spin_lock_irq(&phba->hbalock); + __lpfc_sli4_free_xri(phba, xri); + spin_unlock_irq(&phba->hbalock); +} + /** * lpfc_sli4_next_xritag - Get an xritag for the io * @phba: Pointer to HBA context object. @@ -11520,30 +12427,23 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba, uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *phba) { - uint16_t xritag; + uint16_t xri_index; - spin_lock_irq(&phba->hbalock); - xritag = phba->sli4_hba.next_xri; - if ((xritag != (uint16_t) -1) && xritag < - (phba->sli4_hba.max_cfg_param.max_xri - + phba->sli4_hba.max_cfg_param.xri_base)) { - phba->sli4_hba.next_xri++; - phba->sli4_hba.max_cfg_param.xri_used++; - spin_unlock_irq(&phba->hbalock); - return xritag; - } - spin_unlock_irq(&phba->hbalock); - lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + xri_index = lpfc_sli4_alloc_xri(phba); + if (xri_index != NO_XRI) + return xri_index; + + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "2004 Failed to allocate XRI.last XRITAG is %d" " Max XRI is %d, Used XRI is %d\n", - phba->sli4_hba.next_xri, + xri_index, phba->sli4_hba.max_cfg_param.max_xri, phba->sli4_hba.max_cfg_param.xri_used); - return -1; + return NO_XRI; } /** - * lpfc_sli4_post_sgl_list - post a block of sgl list to the firmware. + * lpfc_sli4_post_els_sgl_list - post a block of ELS sgls to the port. * @phba: pointer to lpfc hba data structure. * * This routine is invoked to post a block of driver's sgl pages to the @@ -11552,7 +12452,7 @@ lpfc_sli4_next_xritag(struct lpfc_hba *phba) * stopped. **/ int -lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) +lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba) { struct lpfc_sglq *sglq_entry; struct lpfc_mbx_post_uembed_sgl_page1 *sgl; @@ -11561,7 +12461,7 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) LPFC_MBOXQ_t *mbox; uint32_t reqlen, alloclen, pg_pairs; uint32_t mbox_tmo; - uint16_t xritag_start = 0; + uint16_t xritag_start = 0, lxri = 0; int els_xri_cnt, rc = 0; uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; @@ -11578,11 +12478,8 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) return -ENOMEM; } mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (!mbox) { - lpfc_printf_log(phba, KERN_ERR, LOG_INIT, - "2560 Failed to allocate mbox cmd memory\n"); + if (!mbox) return -ENOMEM; - } /* Allocate DMA memory and set up the non-embedded mailbox command */ alloclen = lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE, @@ -11597,15 +12494,30 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) lpfc_sli4_mbox_cmd_free(phba, mbox); return -ENOMEM; } - /* Get the first SGE entry from the non-embedded DMA memory */ - viraddr = mbox->sge_array->addr[0]; - /* Set up the SGL pages in the non-embedded DMA pages */ + viraddr = mbox->sge_array->addr[0]; sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr; sgl_pg_pairs = &sgl->sgl_pg_pairs; for (pg_pairs = 0; pg_pairs < els_xri_cnt; pg_pairs++) { sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[pg_pairs]; + + /* + * Assign the sglq a physical xri only if the driver has not + * initialized those resources. A port reset only needs + * the sglq's posted. + */ + if (bf_get(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags) != + LPFC_XRI_RSRC_RDY) { + lxri = lpfc_sli4_next_xritag(phba); + if (lxri == NO_XRI) { + lpfc_sli4_mbox_cmd_free(phba, mbox); + return -ENOMEM; + } + sglq_entry->sli4_lxritag = lxri; + sglq_entry->sli4_xritag = phba->sli4_hba.xri_ids[lxri]; + } + /* Set up the sge entry */ sgl_pg_pairs->sgl_pg0_addr_lo = cpu_to_le32(putPaddrLow(sglq_entry->phys)); @@ -11615,16 +12527,17 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) cpu_to_le32(putPaddrLow(0)); sgl_pg_pairs->sgl_pg1_addr_hi = cpu_to_le32(putPaddrHigh(0)); + /* Keep the first xritag on the list */ if (pg_pairs == 0) xritag_start = sglq_entry->sli4_xritag; sgl_pg_pairs++; } + + /* Complete initialization and perform endian conversion. */ bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start); bf_set(lpfc_post_sgl_pages_xricnt, sgl, els_xri_cnt); - /* Perform endian conversion if necessary */ sgl->word0 = cpu_to_le32(sgl->word0); - if (!phba->sli4_hba.intr_enable) rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); else { @@ -11643,6 +12556,181 @@ lpfc_sli4_post_sgl_list(struct lpfc_hba *phba) shdr_status, shdr_add_status, rc); rc = -ENXIO; } + + if (rc == 0) + bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, + LPFC_XRI_RSRC_RDY); + return rc; +} + +/** + * lpfc_sli4_post_els_sgl_list_ext - post a block of ELS sgls to the port. + * @phba: pointer to lpfc hba data structure. + * + * This routine is invoked to post a block of driver's sgl pages to the + * HBA using non-embedded mailbox command. No Lock is held. This routine + * is only called when the driver is loading and after all IO has been + * stopped. + **/ +int +lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba) +{ + struct lpfc_sglq *sglq_entry; + struct lpfc_mbx_post_uembed_sgl_page1 *sgl; + struct sgl_page_pairs *sgl_pg_pairs; + void *viraddr; + LPFC_MBOXQ_t *mbox; + uint32_t reqlen, alloclen, index; + uint32_t mbox_tmo; + uint16_t rsrc_start, rsrc_size, els_xri_cnt; + uint16_t xritag_start = 0, lxri = 0; + struct lpfc_rsrc_blks *rsrc_blk; + int cnt, ttl_cnt, rc = 0; + int loop_cnt; + uint32_t shdr_status, shdr_add_status; + union lpfc_sli4_cfg_shdr *shdr; + + /* The number of sgls to be posted */ + els_xri_cnt = lpfc_sli4_get_els_iocb_cnt(phba); + + reqlen = els_xri_cnt * sizeof(struct sgl_page_pairs) + + sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t); + if (reqlen > SLI4_PAGE_SIZE) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "2989 Block sgl registration required DMA " + "size (%d) great than a page\n", reqlen); + return -ENOMEM; + } + + cnt = 0; + ttl_cnt = 0; + list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list, + list) { + rsrc_start = rsrc_blk->rsrc_start; + rsrc_size = rsrc_blk->rsrc_size; + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "3014 Working ELS Extent start %d, cnt %d\n", + rsrc_start, rsrc_size); + + loop_cnt = min(els_xri_cnt, rsrc_size); + if (ttl_cnt + loop_cnt >= els_xri_cnt) { + loop_cnt = els_xri_cnt - ttl_cnt; + ttl_cnt = els_xri_cnt; + } + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + /* + * Allocate DMA memory and set up the non-embedded mailbox + * command. + */ + alloclen = lpfc_sli4_config(phba, mbox, + LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, + reqlen, LPFC_SLI4_MBX_NEMBED); + if (alloclen < reqlen) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2987 Allocated DMA memory size (%d) " + "is less than the requested DMA memory " + "size (%d)\n", alloclen, reqlen); + lpfc_sli4_mbox_cmd_free(phba, mbox); + return -ENOMEM; + } + + /* Set up the SGL pages in the non-embedded DMA pages */ + viraddr = mbox->sge_array->addr[0]; + sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr; + sgl_pg_pairs = &sgl->sgl_pg_pairs; + + /* + * The starting resource may not begin at zero. Control + * the loop variants via the block resource parameters, + * but handle the sge pointers with a zero-based index + * that doesn't get reset per loop pass. + */ + for (index = rsrc_start; + index < rsrc_start + loop_cnt; + index++) { + sglq_entry = phba->sli4_hba.lpfc_els_sgl_array[cnt]; + + /* + * Assign the sglq a physical xri only if the driver + * has not initialized those resources. A port reset + * only needs the sglq's posted. + */ + if (bf_get(lpfc_xri_rsrc_rdy, + &phba->sli4_hba.sli4_flags) != + LPFC_XRI_RSRC_RDY) { + lxri = lpfc_sli4_next_xritag(phba); + if (lxri == NO_XRI) { + lpfc_sli4_mbox_cmd_free(phba, mbox); + rc = -ENOMEM; + goto err_exit; + } + sglq_entry->sli4_lxritag = lxri; + sglq_entry->sli4_xritag = + phba->sli4_hba.xri_ids[lxri]; + } + + /* Set up the sge entry */ + sgl_pg_pairs->sgl_pg0_addr_lo = + cpu_to_le32(putPaddrLow(sglq_entry->phys)); + sgl_pg_pairs->sgl_pg0_addr_hi = + cpu_to_le32(putPaddrHigh(sglq_entry->phys)); + sgl_pg_pairs->sgl_pg1_addr_lo = + cpu_to_le32(putPaddrLow(0)); + sgl_pg_pairs->sgl_pg1_addr_hi = + cpu_to_le32(putPaddrHigh(0)); + + /* Track the starting physical XRI for the mailbox. */ + if (index == rsrc_start) + xritag_start = sglq_entry->sli4_xritag; + sgl_pg_pairs++; + cnt++; + } + + /* Complete initialization and perform endian conversion. */ + rsrc_blk->rsrc_used += loop_cnt; + bf_set(lpfc_post_sgl_pages_xri, sgl, xritag_start); + bf_set(lpfc_post_sgl_pages_xricnt, sgl, loop_cnt); + sgl->word0 = cpu_to_le32(sgl->word0); + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "3015 Post ELS Extent SGL, start %d, " + "cnt %d, used %d\n", + xritag_start, loop_cnt, rsrc_blk->rsrc_used); + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, + &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, + &shdr->response); + if (rc != MBX_TIMEOUT) + lpfc_sli4_mbox_cmd_free(phba, mbox); + if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "2988 POST_SGL_BLOCK mailbox " + "command failed status x%x " + "add_status x%x mbx status x%x\n", + shdr_status, shdr_add_status, rc); + rc = -ENXIO; + goto err_exit; + } + if (ttl_cnt >= els_xri_cnt) + break; + } + + err_exit: + if (rc == 0) + bf_set(lpfc_xri_rsrc_rdy, &phba->sli4_hba.sli4_flags, + LPFC_XRI_RSRC_RDY); return rc; } @@ -11703,6 +12791,7 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist, lpfc_sli4_mbox_cmd_free(phba, mbox); return -ENOMEM; } + /* Get the first SGE entry from the non-embedded DMA memory */ viraddr = mbox->sge_array->addr[0]; @@ -11757,6 +12846,169 @@ lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *phba, struct list_head *sblist, return rc; } +/** + * lpfc_sli4_post_scsi_sgl_blk_ext - post a block of scsi sgls to the port. + * @phba: pointer to lpfc hba data structure. + * @sblist: pointer to scsi buffer list. + * @count: number of scsi buffers on the list. + * + * This routine is invoked to post a block of @count scsi sgl pages from a + * SCSI buffer list @sblist to the HBA using non-embedded mailbox command. + * No Lock is held. + * + **/ +int +lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *phba, struct list_head *sblist, + int cnt) +{ + struct lpfc_scsi_buf *psb = NULL; + struct lpfc_mbx_post_uembed_sgl_page1 *sgl; + struct sgl_page_pairs *sgl_pg_pairs; + void *viraddr; + LPFC_MBOXQ_t *mbox; + uint32_t reqlen, alloclen, pg_pairs; + uint32_t mbox_tmo; + uint16_t xri_start = 0, scsi_xri_start; + uint16_t rsrc_range; + int rc = 0, avail_cnt; + uint32_t shdr_status, shdr_add_status; + dma_addr_t pdma_phys_bpl1; + union lpfc_sli4_cfg_shdr *shdr; + struct lpfc_rsrc_blks *rsrc_blk; + uint32_t xri_cnt = 0; + + /* Calculate the total requested length of the dma memory */ + reqlen = cnt * sizeof(struct sgl_page_pairs) + + sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t); + if (reqlen > SLI4_PAGE_SIZE) { + lpfc_printf_log(phba, KERN_WARNING, LOG_INIT, + "2932 Block sgl registration required DMA " + "size (%d) great than a page\n", reqlen); + return -ENOMEM; + } + + /* + * The use of extents requires the driver to post the sgl headers + * in multiple postings to meet the contiguous resource assignment. + */ + psb = list_prepare_entry(psb, sblist, list); + scsi_xri_start = phba->sli4_hba.scsi_xri_start; + list_for_each_entry(rsrc_blk, &phba->sli4_hba.lpfc_xri_blk_list, + list) { + rsrc_range = rsrc_blk->rsrc_start + rsrc_blk->rsrc_size; + if (rsrc_range < scsi_xri_start) + continue; + else if (rsrc_blk->rsrc_used >= rsrc_blk->rsrc_size) + continue; + else + avail_cnt = rsrc_blk->rsrc_size - rsrc_blk->rsrc_used; + + reqlen = (avail_cnt * sizeof(struct sgl_page_pairs)) + + sizeof(union lpfc_sli4_cfg_shdr) + sizeof(uint32_t); + /* + * Allocate DMA memory and set up the non-embedded mailbox + * command. The mbox is used to post an SGL page per loop + * but the DMA memory has a use-once semantic so the mailbox + * is used and freed per loop pass. + */ + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2933 Failed to allocate mbox cmd " + "memory\n"); + return -ENOMEM; + } + alloclen = lpfc_sli4_config(phba, mbox, + LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES, + reqlen, + LPFC_SLI4_MBX_NEMBED); + if (alloclen < reqlen) { + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "2934 Allocated DMA memory size (%d) " + "is less than the requested DMA memory " + "size (%d)\n", alloclen, reqlen); + lpfc_sli4_mbox_cmd_free(phba, mbox); + return -ENOMEM; + } + + /* Get the first SGE entry from the non-embedded DMA memory */ + viraddr = mbox->sge_array->addr[0]; + + /* Set up the SGL pages in the non-embedded DMA pages */ + sgl = (struct lpfc_mbx_post_uembed_sgl_page1 *)viraddr; + sgl_pg_pairs = &sgl->sgl_pg_pairs; + + /* pg_pairs tracks posted SGEs per loop iteration. */ + pg_pairs = 0; + list_for_each_entry_continue(psb, sblist, list) { + /* Set up the sge entry */ + sgl_pg_pairs->sgl_pg0_addr_lo = + cpu_to_le32(putPaddrLow(psb->dma_phys_bpl)); + sgl_pg_pairs->sgl_pg0_addr_hi = + cpu_to_le32(putPaddrHigh(psb->dma_phys_bpl)); + if (phba->cfg_sg_dma_buf_size > SGL_PAGE_SIZE) + pdma_phys_bpl1 = psb->dma_phys_bpl + + SGL_PAGE_SIZE; + else + pdma_phys_bpl1 = 0; + sgl_pg_pairs->sgl_pg1_addr_lo = + cpu_to_le32(putPaddrLow(pdma_phys_bpl1)); + sgl_pg_pairs->sgl_pg1_addr_hi = + cpu_to_le32(putPaddrHigh(pdma_phys_bpl1)); + /* Keep the first xri for this extent. */ + if (pg_pairs == 0) + xri_start = psb->cur_iocbq.sli4_xritag; + sgl_pg_pairs++; + pg_pairs++; + xri_cnt++; + + /* + * Track two exit conditions - the loop has constructed + * all of the caller's SGE pairs or all available + * resource IDs in this extent are consumed. + */ + if ((xri_cnt == cnt) || (pg_pairs >= avail_cnt)) + break; + } + rsrc_blk->rsrc_used += pg_pairs; + bf_set(lpfc_post_sgl_pages_xri, sgl, xri_start); + bf_set(lpfc_post_sgl_pages_xricnt, sgl, pg_pairs); + + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "3016 Post SCSI Extent SGL, start %d, cnt %d " + "blk use %d\n", + xri_start, pg_pairs, rsrc_blk->rsrc_used); + /* Perform endian conversion if necessary */ + sgl->word0 = cpu_to_le32(sgl->word0); + if (!phba->sli4_hba.intr_enable) + rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL); + else { + mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); + rc = lpfc_sli_issue_mbox_wait(phba, mbox, mbox_tmo); + } + shdr = (union lpfc_sli4_cfg_shdr *) &sgl->cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, + &shdr->response); + if (rc != MBX_TIMEOUT) + lpfc_sli4_mbox_cmd_free(phba, mbox); + if (shdr_status || shdr_add_status || rc) { + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, + "2935 POST_SGL_BLOCK mailbox command " + "failed status x%x add_status x%x " + "mbx status x%x\n", + shdr_status, shdr_add_status, rc); + return -ENXIO; + } + + /* Post only what is requested. */ + if (xri_cnt >= cnt) + break; + } + return rc; +} + /** * lpfc_fc_frame_check - Check that this frame is a valid frame to handle * @phba: pointer to lpfc_hba struct that the frame was received on @@ -12146,6 +13398,28 @@ lpfc_sli4_seq_abort_rsp_cmpl(struct lpfc_hba *phba, lpfc_sli_release_iocbq(phba, cmd_iocbq); } +/** + * lpfc_sli4_xri_inrange - check xri is in range of xris owned by driver. + * @phba: Pointer to HBA context object. + * @xri: xri id in transaction. + * + * This function validates the xri maps to the known range of XRIs allocated an + * used by the driver. + **/ +static uint16_t +lpfc_sli4_xri_inrange(struct lpfc_hba *phba, + uint16_t xri) +{ + int i; + + for (i = 0; i < phba->sli4_hba.max_cfg_param.max_xri; i++) { + if (xri == phba->sli4_hba.xri_ids[i]) + return i; + } + return NO_XRI; +} + + /** * lpfc_sli4_seq_abort_rsp - bls rsp to sequence abort * @phba: Pointer to HBA context object. @@ -12179,9 +13453,7 @@ lpfc_sli4_seq_abort_rsp(struct lpfc_hba *phba, "SID:x%x\n", oxid, sid); return; } - if (rxid >= phba->sli4_hba.max_cfg_param.xri_base - && rxid <= (phba->sli4_hba.max_cfg_param.max_xri - + phba->sli4_hba.max_cfg_param.xri_base)) + if (lpfc_sli4_xri_inrange(phba, rxid)) lpfc_set_rrq_active(phba, ndlp, rxid, oxid, 0); /* Allocate buffer for rsp iocb */ @@ -12204,12 +13476,13 @@ lpfc_sli4_seq_abort_rsp(struct lpfc_hba *phba, icmd->ulpBdeCount = 0; icmd->ulpLe = 1; icmd->ulpClass = CLASS3; - icmd->ulpContext = ndlp->nlp_rpi; + icmd->ulpContext = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; ctiocb->context1 = ndlp; ctiocb->iocb_cmpl = NULL; ctiocb->vport = phba->pport; ctiocb->iocb_cmpl = lpfc_sli4_seq_abort_rsp_cmpl; + ctiocb->sli4_lxritag = NO_XRI; ctiocb->sli4_xritag = NO_XRI; /* If the oxid maps to the FCP XRI range or if it is out of range, @@ -12390,8 +13663,8 @@ lpfc_prep_seq(struct lpfc_vport *vport, struct hbq_dmabuf *seq_dmabuf) first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS; first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX; first_iocbq->iocb.ulpContext = be16_to_cpu(fc_hdr->fh_ox_id); - first_iocbq->iocb.unsli3.rcvsli3.vpi = - vport->vpi + vport->phba->vpi_base; + /* iocbq is prepped for internal consumption. Logical vpi. */ + first_iocbq->iocb.unsli3.rcvsli3.vpi = vport->vpi; /* put the first buffer into the first IOCBq */ first_iocbq->context2 = &seq_dmabuf->dbuf; first_iocbq->context3 = NULL; @@ -12471,7 +13744,7 @@ lpfc_sli4_send_seq_to_ulp(struct lpfc_vport *vport, &phba->sli.ring[LPFC_ELS_RING], iocbq, fc_hdr->fh_r_ctl, fc_hdr->fh_type)) - lpfc_printf_log(phba, KERN_WARNING, LOG_SLI, + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "2540 Ring %d handler: unexpected Rctl " "x%x Type x%x received\n", LPFC_ELS_RING, @@ -12568,9 +13841,24 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba) { struct lpfc_rpi_hdr *rpi_page; uint32_t rc = 0; + uint16_t lrpi = 0; + + /* SLI4 ports that support extents do not require RPI headers. */ + if (!phba->sli4_hba.rpi_hdrs_in_use) + goto exit; + if (phba->sli4_hba.extents_in_use) + return -EIO; - /* Post all rpi memory regions to the port. */ list_for_each_entry(rpi_page, &phba->sli4_hba.lpfc_rpi_hdr_list, list) { + /* + * Assign the rpi headers a physical rpi only if the driver + * has not initialized those resources. A port reset only + * needs the headers posted. + */ + if (bf_get(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags) != + LPFC_RPI_RSRC_RDY) + rpi_page->start_rpi = phba->sli4_hba.rpi_ids[lrpi]; + rc = lpfc_sli4_post_rpi_hdr(phba, rpi_page); if (rc != MBX_SUCCESS) { lpfc_printf_log(phba, KERN_ERR, LOG_SLI, @@ -12581,6 +13869,9 @@ lpfc_sli4_post_all_rpi_hdrs(struct lpfc_hba *phba) } } + exit: + bf_set(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, + LPFC_RPI_RSRC_RDY); return rc; } @@ -12604,10 +13895,15 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) LPFC_MBOXQ_t *mboxq; struct lpfc_mbx_post_hdr_tmpl *hdr_tmpl; uint32_t rc = 0; - uint32_t mbox_tmo; uint32_t shdr_status, shdr_add_status; union lpfc_sli4_cfg_shdr *shdr; + /* SLI4 ports that support extents do not require RPI headers. */ + if (!phba->sli4_hba.rpi_hdrs_in_use) + return rc; + if (phba->sli4_hba.extents_in_use) + return -EIO; + /* The port is notified of the header region via a mailbox command. */ mboxq = (LPFC_MBOXQ_t *) mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!mboxq) { @@ -12619,16 +13915,19 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) /* Post all rpi memory regions to the port. */ hdr_tmpl = &mboxq->u.mqe.un.hdr_tmpl; - mbox_tmo = lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG); lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE, LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE, sizeof(struct lpfc_mbx_post_hdr_tmpl) - sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED); - bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt, - hdr_tmpl, rpi_page->page_count); + + + /* Post the physical rpi to the port for this rpi header. */ bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl, rpi_page->start_rpi); + bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt, + hdr_tmpl, rpi_page->page_count); + hdr_tmpl->rpi_paddr_lo = putPaddrLow(rpi_page->dmabuf->phys); hdr_tmpl->rpi_paddr_hi = putPaddrHigh(rpi_page->dmabuf->phys); rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL); @@ -12663,22 +13962,21 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page) int lpfc_sli4_alloc_rpi(struct lpfc_hba *phba) { - int rpi; - uint16_t max_rpi, rpi_base, rpi_limit; - uint16_t rpi_remaining; + unsigned long rpi; + uint16_t max_rpi, rpi_limit; + uint16_t rpi_remaining, lrpi = 0; struct lpfc_rpi_hdr *rpi_hdr; max_rpi = phba->sli4_hba.max_cfg_param.max_rpi; - rpi_base = phba->sli4_hba.max_cfg_param.rpi_base; rpi_limit = phba->sli4_hba.next_rpi; /* - * The valid rpi range is not guaranteed to be zero-based. Start - * the search at the rpi_base as reported by the port. + * Fetch the next logical rpi. Because this index is logical, + * the driver starts at 0 each time. */ spin_lock_irq(&phba->hbalock); - rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, rpi_base); - if (rpi >= rpi_limit || rpi < rpi_base) + rpi = find_next_zero_bit(phba->sli4_hba.rpi_bmask, rpi_limit, 0); + if (rpi >= rpi_limit) rpi = LPFC_RPI_ALLOC_ERROR; else { set_bit(rpi, phba->sli4_hba.rpi_bmask); @@ -12688,7 +13986,7 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba) /* * Don't try to allocate more rpi header regions if the device limit - * on available rpis max has been exhausted. + * has been exhausted. */ if ((rpi == LPFC_RPI_ALLOC_ERROR) && (phba->sli4_hba.rpi_count >= max_rpi)) { @@ -12696,14 +13994,22 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba) return rpi; } + /* + * RPI header postings are not required for SLI4 ports capable of + * extents. + */ + if (!phba->sli4_hba.rpi_hdrs_in_use) { + spin_unlock_irq(&phba->hbalock); + return rpi; + } + /* * If the driver is running low on rpi resources, allocate another * page now. Note that the next_rpi value is used because * it represents how many are actually in use whereas max_rpi notes * how many are supported max by the device. */ - rpi_remaining = phba->sli4_hba.next_rpi - rpi_base - - phba->sli4_hba.rpi_count; + rpi_remaining = phba->sli4_hba.next_rpi - phba->sli4_hba.rpi_count; spin_unlock_irq(&phba->hbalock); if (rpi_remaining < LPFC_RPI_LOW_WATER_MARK) { rpi_hdr = lpfc_sli4_create_rpi_hdr(phba); @@ -12712,6 +14018,8 @@ lpfc_sli4_alloc_rpi(struct lpfc_hba *phba) "2002 Error Could not grow rpi " "count\n"); } else { + lrpi = rpi_hdr->start_rpi; + rpi_hdr->start_rpi = phba->sli4_hba.rpi_ids[lrpi]; lpfc_sli4_post_rpi_hdr(phba, rpi_hdr); } } @@ -12761,6 +14069,8 @@ void lpfc_sli4_remove_rpis(struct lpfc_hba *phba) { kfree(phba->sli4_hba.rpi_bmask); + kfree(phba->sli4_hba.rpi_ids); + bf_set(lpfc_rpi_rsrc_rdy, &phba->sli4_hba.sli4_flags, 0); } /** @@ -13744,7 +15054,7 @@ lpfc_drain_txq(struct lpfc_hba *phba) * never happen */ sglq = __lpfc_clear_active_sglq(phba, - sglq->sli4_xritag); + sglq->sli4_lxritag); spin_unlock_irqrestore(&phba->hbalock, iflags); lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "2823 txq empty and txq_cnt is %d\n ", @@ -13756,6 +15066,7 @@ lpfc_drain_txq(struct lpfc_hba *phba) /* The xri and iocb resources secured, * attempt to issue request */ + piocbq->sli4_lxritag = sglq->sli4_lxritag; piocbq->sli4_xritag = sglq->sli4_xritag; if (NO_XRI == lpfc_sli4_bpl2sgl(phba, piocbq, sglq)) fail_msg = "to convert bpl to sgl"; diff --git a/drivers/scsi/lpfc/lpfc_sli.h b/drivers/scsi/lpfc/lpfc_sli.h index 453577c21c14..a0075b0af142 100644 --- a/drivers/scsi/lpfc/lpfc_sli.h +++ b/drivers/scsi/lpfc/lpfc_sli.h @@ -52,6 +52,7 @@ struct lpfc_iocbq { struct list_head clist; struct list_head dlist; uint16_t iotag; /* pre-assigned IO tag */ + uint16_t sli4_lxritag; /* logical pre-assigned XRI. */ uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */ struct lpfc_cq_event cq_event; diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h index 03d25a9d3bf6..4b1703554a26 100644 --- a/drivers/scsi/lpfc/lpfc_sli4.h +++ b/drivers/scsi/lpfc/lpfc_sli4.h @@ -310,7 +310,6 @@ struct lpfc_max_cfg_param { uint16_t vfi_base; uint16_t vfi_used; uint16_t max_fcfi; - uint16_t fcfi_base; uint16_t fcfi_used; uint16_t max_eq; uint16_t max_rq; @@ -449,10 +448,13 @@ struct lpfc_sli4_hba { uint32_t intr_enable; struct lpfc_bmbx bmbx; struct lpfc_max_cfg_param max_cfg_param; + uint16_t extents_in_use; /* must allocate resource extents. */ + uint16_t rpi_hdrs_in_use; /* must post rpi hdrs if set. */ uint16_t next_xri; /* last_xri - max_cfg_param.xri_base = used */ uint16_t next_rpi; uint16_t scsi_xri_max; uint16_t scsi_xri_cnt; + uint16_t scsi_xri_start; struct list_head lpfc_free_sgl_list; struct list_head lpfc_sgl_list; struct lpfc_sglq **lpfc_els_sgl_array; @@ -463,7 +465,17 @@ struct lpfc_sli4_hba { struct lpfc_sglq **lpfc_sglq_active_list; struct list_head lpfc_rpi_hdr_list; unsigned long *rpi_bmask; + uint16_t *rpi_ids; uint16_t rpi_count; + struct list_head lpfc_rpi_blk_list; + unsigned long *xri_bmask; + uint16_t *xri_ids; + uint16_t xri_count; + struct list_head lpfc_xri_blk_list; + unsigned long *vfi_bmask; + uint16_t *vfi_ids; + uint16_t vfi_count; + struct list_head lpfc_vfi_blk_list; struct lpfc_sli4_flags sli4_flags; struct list_head sp_queue_event; struct list_head sp_cqe_event_pool; @@ -496,6 +508,7 @@ struct lpfc_sglq { enum lpfc_sgl_state state; struct lpfc_nodelist *ndlp; /* ndlp associated with IO */ uint16_t iotag; /* pre-assigned IO tag */ + uint16_t sli4_lxritag; /* logical pre-assigned xri. */ uint16_t sli4_xritag; /* pre-assigned XRI, (OXID) tag. */ struct sli4_sge *sgl; /* pre-assigned SGL */ void *virt; /* virtual address. */ @@ -510,6 +523,13 @@ struct lpfc_rpi_hdr { uint32_t start_rpi; }; +struct lpfc_rsrc_blks { + struct list_head list; + uint16_t rsrc_start; + uint16_t rsrc_size; + uint16_t rsrc_used; +}; + /* * SLI4 specific function prototypes */ @@ -549,8 +569,11 @@ int lpfc_sli4_post_sgl(struct lpfc_hba *, dma_addr_t, dma_addr_t, uint16_t); int lpfc_sli4_repost_scsi_sgl_list(struct lpfc_hba *); uint16_t lpfc_sli4_next_xritag(struct lpfc_hba *); int lpfc_sli4_post_async_mbox(struct lpfc_hba *); -int lpfc_sli4_post_sgl_list(struct lpfc_hba *phba); +int lpfc_sli4_post_els_sgl_list(struct lpfc_hba *phba); +int lpfc_sli4_post_els_sgl_list_ext(struct lpfc_hba *phba); int lpfc_sli4_post_scsi_sgl_block(struct lpfc_hba *, struct list_head *, int); +int lpfc_sli4_post_scsi_sgl_blk_ext(struct lpfc_hba *, struct list_head *, + int); struct lpfc_cq_event *__lpfc_sli4_cq_event_alloc(struct lpfc_hba *); struct lpfc_cq_event *lpfc_sli4_cq_event_alloc(struct lpfc_hba *); void __lpfc_sli4_cq_event_release(struct lpfc_hba *, struct lpfc_cq_event *); diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c index 30ba5440c67a..1feb551a57bc 100644 --- a/drivers/scsi/lpfc/lpfc_vport.c +++ b/drivers/scsi/lpfc/lpfc_vport.c @@ -83,7 +83,7 @@ inline void lpfc_vport_set_state(struct lpfc_vport *vport, static int lpfc_alloc_vpi(struct lpfc_hba *phba) { - int vpi; + unsigned long vpi; spin_lock_irq(&phba->hbalock); /* Start at bit 1 because vpi zero is reserved for the physical port */ -- cgit v1.2.3 From 7ad20aa9d39a525542b0840ac38bfc77be831e19 Mon Sep 17 00:00:00 2001 From: James Smart Date: Tue, 24 May 2011 11:44:28 -0400 Subject: [SCSI] lpfc 8.3.24: Extend BSG infrastructure and add link diagnostics Extend BSG infrastructure and add link diagnostics: - Removed unnecessary copies in handling pass-through mbox cmds. - Add embedded SLI_CONFIG support for BSG. - Add multibuffer support. - Implemented the setting up and tearing down Lancer FC device for performing internal and external loopback diagnostic tests. - Implemented the driver support for performing new link diagnostic tests Signed-off-by: Alex Iannicelli Signed-off-by: James Smart Signed-off-by: James Bottomley --- drivers/scsi/lpfc/lpfc.h | 38 +- drivers/scsi/lpfc/lpfc_bsg.c | 2417 ++++++++++++++++++++++++++++++++--------- drivers/scsi/lpfc/lpfc_bsg.h | 87 +- drivers/scsi/lpfc/lpfc_hw4.h | 82 ++ drivers/scsi/lpfc/lpfc_init.c | 8 + 5 files changed, 2073 insertions(+), 559 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index dfd9ace862e7..8ec2c86a49d4 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -487,6 +487,42 @@ struct unsol_rcv_ct_ctx { (1 << LPFC_USER_LINK_SPEED_AUTO)) #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16" +enum nemb_type { + nemb_mse = 1, + nemb_hbd +}; + +enum mbox_type { + mbox_rd = 1, + mbox_wr +}; + +enum dma_type { + dma_mbox = 1, + dma_ebuf +}; + +enum sta_type { + sta_pre_addr = 1, + sta_pos_addr +}; + +struct lpfc_mbox_ext_buf_ctx { + uint32_t state; +#define LPFC_BSG_MBOX_IDLE 0 +#define LPFC_BSG_MBOX_HOST 1 +#define LPFC_BSG_MBOX_PORT 2 +#define LPFC_BSG_MBOX_DONE 3 +#define LPFC_BSG_MBOX_ABTS 4 + enum nemb_type nembType; + enum mbox_type mboxType; + uint32_t numBuf; + uint32_t mbxTag; + uint32_t seqNum; + struct lpfc_dmabuf *mbx_dmabuf; + struct list_head ext_dmabuf_list; +}; + struct lpfc_hba { /* SCSI interface function jump table entries */ int (*lpfc_new_scsi_buf) @@ -590,6 +626,7 @@ struct lpfc_hba { MAILBOX_t *mbox; uint32_t *mbox_ext; + struct lpfc_mbox_ext_buf_ctx mbox_ext_buf_ctx; uint32_t ha_copy; struct _PCB *pcb; struct _IOCB *IOCBs; @@ -708,7 +745,6 @@ struct lpfc_hba { uint32_t *hbq_get; /* Host mem address of HBQ get ptrs */ int brd_no; /* FC board number */ - char SerialNumber[32]; /* adapter Serial Number */ char OptionROMVersion[32]; /* adapter BIOS / Fcode version */ char ModelDesc[256]; /* Model Description */ diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c index 080187b0e701..7fb0ba4cbfa7 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.c +++ b/drivers/scsi/lpfc/lpfc_bsg.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -79,8 +80,7 @@ struct lpfc_bsg_iocb { struct lpfc_bsg_mbox { LPFC_MBOXQ_t *pmboxq; MAILBOX_t *mb; - struct lpfc_dmabuf *rxbmp; /* for BIU diags */ - struct lpfc_dmabufext *dmp; /* for BIU diags */ + struct lpfc_dmabuf *dmabuffers; /* for BIU diags */ uint8_t *ext; /* extended mailbox data */ uint32_t mbOffset; /* from app */ uint32_t inExtWLen; /* from app */ @@ -1469,11 +1469,91 @@ send_mgmt_rsp_exit: } /** - * lpfc_bsg_diag_mode - process a LPFC_BSG_VENDOR_DIAG_MODE bsg vendor command + * lpfc_bsg_diag_mode_enter - process preparing into device diag loopback mode + * @phba: Pointer to HBA context object. + * @job: LPFC_BSG_VENDOR_DIAG_MODE + * + * This function is responsible for preparing driver for diag loopback + * on device. + */ +static int +lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba, struct fc_bsg_job *job) +{ + struct lpfc_vport **vports; + struct Scsi_Host *shost; + struct lpfc_sli *psli; + struct lpfc_sli_ring *pring; + int i = 0; + + psli = &phba->sli; + if (!psli) + return -ENODEV; + + pring = &psli->ring[LPFC_FCP_RING]; + if (!pring) + return -ENODEV; + + if ((phba->link_state == LPFC_HBA_ERROR) || + (psli->sli_flag & LPFC_BLOCK_MGMT_IO) || + (!(psli->sli_flag & LPFC_SLI_ACTIVE))) + return -EACCES; + + vports = lpfc_create_vport_work_array(phba); + if (vports) { + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + shost = lpfc_shost_from_vport(vports[i]); + scsi_block_requests(shost); + } + lpfc_destroy_vport_work_array(phba, vports); + } else { + shost = lpfc_shost_from_vport(phba->pport); + scsi_block_requests(shost); + } + + while (pring->txcmplq_cnt) { + if (i++ > 500) /* wait up to 5 seconds */ + break; + msleep(10); + } + return 0; +} + +/** + * lpfc_bsg_diag_mode_exit - exit process from device diag loopback mode + * @phba: Pointer to HBA context object. + * @job: LPFC_BSG_VENDOR_DIAG_MODE + * + * This function is responsible for driver exit processing of setting up + * diag loopback mode on device. + */ +static void +lpfc_bsg_diag_mode_exit(struct lpfc_hba *phba) +{ + struct Scsi_Host *shost; + struct lpfc_vport **vports; + int i; + + vports = lpfc_create_vport_work_array(phba); + if (vports) { + for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { + shost = lpfc_shost_from_vport(vports[i]); + scsi_unblock_requests(shost); + } + lpfc_destroy_vport_work_array(phba, vports); + } else { + shost = lpfc_shost_from_vport(phba->pport); + scsi_unblock_requests(shost); + } + return; +} + +/** + * lpfc_sli3_bsg_diag_loopback_mode - process an sli3 bsg vendor command + * @phba: Pointer to HBA context object. * @job: LPFC_BSG_VENDOR_DIAG_MODE * - * This function is responsible for placing a port into diagnostic loopback - * mode in order to perform a diagnostic loopback test. + * This function is responsible for placing an sli3 port into diagnostic + * loopback mode in order to perform a diagnostic loopback test. * All new scsi requests are blocked, a small delay is used to allow the * scsi requests to complete then the link is brought down. If the link is * is placed in loopback mode then scsi requests are again allowed @@ -1481,17 +1561,11 @@ send_mgmt_rsp_exit: * All of this is done in-line. */ static int -lpfc_bsg_diag_mode(struct fc_bsg_job *job) +lpfc_sli3_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct fc_bsg_job *job) { - struct Scsi_Host *shost = job->shost; - struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; - struct lpfc_hba *phba = vport->phba; struct diag_mode_set *loopback_mode; - struct lpfc_sli *psli = &phba->sli; - struct lpfc_sli_ring *pring = &psli->ring[LPFC_FCP_RING]; uint32_t link_flags; uint32_t timeout; - struct lpfc_vport **vports; LPFC_MBOXQ_t *pmboxq; int mbxstatus; int i = 0; @@ -1500,53 +1574,33 @@ lpfc_bsg_diag_mode(struct fc_bsg_job *job) /* no data to return just the return code */ job->reply->reply_payload_rcv_len = 0; - if (job->request_len < - sizeof(struct fc_bsg_request) + sizeof(struct diag_mode_set)) { + if (job->request_len < sizeof(struct fc_bsg_request) + + sizeof(struct diag_mode_set)) { lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, - "2738 Received DIAG MODE request below minimum " - "size\n"); + "2738 Received DIAG MODE request size:%d " + "below the minimum size:%d\n", + job->request_len, + (int)(sizeof(struct fc_bsg_request) + + sizeof(struct diag_mode_set))); rc = -EINVAL; goto job_error; } + rc = lpfc_bsg_diag_mode_enter(phba, job); + if (rc) + goto job_error; + + /* bring the link to diagnostic mode */ loopback_mode = (struct diag_mode_set *) job->request->rqst_data.h_vendor.vendor_cmd; link_flags = loopback_mode->type; timeout = loopback_mode->timeout * 100; - if ((phba->link_state == LPFC_HBA_ERROR) || - (psli->sli_flag & LPFC_BLOCK_MGMT_IO) || - (!(psli->sli_flag & LPFC_SLI_ACTIVE))) { - rc = -EACCES; - goto job_error; - } - pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmboxq) { rc = -ENOMEM; - goto job_error; - } - - vports = lpfc_create_vport_work_array(phba); - if (vports) { - for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { - shost = lpfc_shost_from_vport(vports[i]); - scsi_block_requests(shost); - } - - lpfc_destroy_vport_work_array(phba, vports); - } else { - shost = lpfc_shost_from_vport(phba->pport); - scsi_block_requests(shost); - } - - while (pring->txcmplq_cnt) { - if (i++ > 500) /* wait up to 5 seconds */ - break; - - msleep(10); + goto loopback_mode_exit; } - memset((void *)pmboxq, 0, sizeof(LPFC_MBOXQ_t)); pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK; pmboxq->u.mb.mbxOwner = OWN_HOST; @@ -1600,17 +1654,7 @@ lpfc_bsg_diag_mode(struct fc_bsg_job *job) rc = -ENODEV; loopback_mode_exit: - vports = lpfc_create_vport_work_array(phba); - if (vports) { - for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { - shost = lpfc_shost_from_vport(vports[i]); - scsi_unblock_requests(shost); - } - lpfc_destroy_vport_work_array(phba, vports); - } else { - shost = lpfc_shost_from_vport(phba->pport); - scsi_unblock_requests(shost); - } + lpfc_bsg_diag_mode_exit(phba); /* * Let SLI layer release mboxq if mbox command completed after timeout. @@ -1628,102 +1672,504 @@ job_error: } /** - * lpfcdiag_loop_self_reg - obtains a remote port login id - * @phba: Pointer to HBA context object - * @rpi: Pointer to a remote port login id + * lpfc_sli4_bsg_set_link_diag_state - set sli4 link diag state + * @phba: Pointer to HBA context object. + * @diag: Flag for set link to diag or nomral operation state. * - * This function obtains a remote port login id so the diag loopback test - * can send and receive its own unsolicited CT command. - **/ -static int lpfcdiag_loop_self_reg(struct lpfc_hba *phba, uint16_t *rpi) + * This function is responsible for issuing a sli4 mailbox command for setting + * link to either diag state or normal operation state. + */ +static int +lpfc_sli4_bsg_set_link_diag_state(struct lpfc_hba *phba, uint32_t diag) { - LPFC_MBOXQ_t *mbox; - struct lpfc_dmabuf *dmabuff; - int status; + LPFC_MBOXQ_t *pmboxq; + struct lpfc_mbx_set_link_diag_state *link_diag_state; + uint32_t req_len, alloc_len; + int mbxstatus = MBX_SUCCESS, rc; - mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (!mbox) + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) return -ENOMEM; - if (phba->sli_rev == LPFC_SLI_REV4) - *rpi = lpfc_sli4_alloc_rpi(phba); - status = lpfc_reg_rpi(phba, 0, phba->pport->fc_myDID, - (uint8_t *)&phba->pport->fc_sparam, mbox, *rpi); - if (status) { - mempool_free(mbox, phba->mbox_mem_pool); - if (phba->sli_rev == LPFC_SLI_REV4) - lpfc_sli4_free_rpi(phba, *rpi); - return -ENOMEM; + req_len = (sizeof(struct lpfc_mbx_set_link_diag_state) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE, + req_len, LPFC_SLI4_MBX_EMBED); + if (alloc_len != req_len) { + rc = -ENOMEM; + goto link_diag_state_set_out; } + link_diag_state = &pmboxq->u.mqe.un.link_diag_state; + bf_set(lpfc_mbx_set_diag_state_link_num, &link_diag_state->u.req, + phba->sli4_hba.link_state.number); + bf_set(lpfc_mbx_set_diag_state_link_type, &link_diag_state->u.req, + phba->sli4_hba.link_state.type); + if (diag) + bf_set(lpfc_mbx_set_diag_state_diag, + &link_diag_state->u.req, 1); + else + bf_set(lpfc_mbx_set_diag_state_diag, + &link_diag_state->u.req, 0); - dmabuff = (struct lpfc_dmabuf *) mbox->context1; - mbox->context1 = NULL; - mbox->context2 = NULL; - status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO); - if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) { - lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys); - kfree(dmabuff); - if (status != MBX_TIMEOUT) - mempool_free(mbox, phba->mbox_mem_pool); - if (phba->sli_rev == LPFC_SLI_REV4) - lpfc_sli4_free_rpi(phba, *rpi); - return -ENODEV; - } + if ((mbxstatus == MBX_SUCCESS) && (pmboxq->u.mb.mbxStatus == 0)) + rc = 0; + else + rc = -ENODEV; - *rpi = mbox->u.mb.un.varWords[0]; +link_diag_state_set_out: + if (pmboxq && (mbxstatus != MBX_TIMEOUT)) + mempool_free(pmboxq, phba->mbox_mem_pool); - lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys); - kfree(dmabuff); - mempool_free(mbox, phba->mbox_mem_pool); - return 0; + return rc; } /** - * lpfcdiag_loop_self_unreg - unregs from the rpi - * @phba: Pointer to HBA context object - * @rpi: Remote port login id + * lpfc_sli4_bsg_diag_loopback_mode - process an sli4 bsg vendor command + * @phba: Pointer to HBA context object. + * @job: LPFC_BSG_VENDOR_DIAG_MODE * - * This function unregisters the rpi obtained in lpfcdiag_loop_self_reg - **/ -static int lpfcdiag_loop_self_unreg(struct lpfc_hba *phba, uint16_t rpi) + * This function is responsible for placing an sli4 port into diagnostic + * loopback mode in order to perform a diagnostic loopback test. + */ +static int +lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct fc_bsg_job *job) { - LPFC_MBOXQ_t *mbox; - int status; + struct diag_mode_set *loopback_mode; + uint32_t link_flags, timeout, req_len, alloc_len; + struct lpfc_mbx_set_link_diag_loopback *link_diag_loopback; + LPFC_MBOXQ_t *pmboxq = NULL; + int mbxstatus, i, rc = 0; - /* Allocate mboxq structure */ - mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); - if (mbox == NULL) - return -ENOMEM; + /* no data to return just the return code */ + job->reply->reply_payload_rcv_len = 0; - lpfc_unreg_login(phba, 0, rpi, mbox); - status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); + if (job->request_len < sizeof(struct fc_bsg_request) + + sizeof(struct diag_mode_set)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "3011 Received DIAG MODE request size:%d " + "below the minimum size:%d\n", + job->request_len, + (int)(sizeof(struct fc_bsg_request) + + sizeof(struct diag_mode_set))); + rc = -EINVAL; + goto job_error; + } - if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) { - if (status != MBX_TIMEOUT) - mempool_free(mbox, phba->mbox_mem_pool); - return -EIO; + rc = lpfc_bsg_diag_mode_enter(phba, job); + if (rc) + goto job_error; + + /* bring the link to diagnostic mode */ + loopback_mode = (struct diag_mode_set *) + job->request->rqst_data.h_vendor.vendor_cmd; + link_flags = loopback_mode->type; + timeout = loopback_mode->timeout * 100; + + rc = lpfc_sli4_bsg_set_link_diag_state(phba, 1); + if (rc) + goto loopback_mode_exit; + + /* wait for link down before proceeding */ + i = 0; + while (phba->link_state != LPFC_LINK_DOWN) { + if (i++ > timeout) { + rc = -ETIMEDOUT; + goto loopback_mode_exit; + } + msleep(10); } - mempool_free(mbox, phba->mbox_mem_pool); - if (phba->sli_rev == LPFC_SLI_REV4) - lpfc_sli4_free_rpi(phba, rpi); - return 0; + /* set up loopback mode */ + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) { + rc = -ENOMEM; + goto loopback_mode_exit; + } + req_len = (sizeof(struct lpfc_mbx_set_link_diag_loopback) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK, + req_len, LPFC_SLI4_MBX_EMBED); + if (alloc_len != req_len) { + rc = -ENOMEM; + goto loopback_mode_exit; + } + link_diag_loopback = &pmboxq->u.mqe.un.link_diag_loopback; + bf_set(lpfc_mbx_set_diag_state_link_num, + &link_diag_loopback->u.req, phba->sli4_hba.link_state.number); + bf_set(lpfc_mbx_set_diag_state_link_type, + &link_diag_loopback->u.req, phba->sli4_hba.link_state.type); + if (link_flags == INTERNAL_LOOP_BACK) + bf_set(lpfc_mbx_set_diag_lpbk_type, + &link_diag_loopback->u.req, + LPFC_DIAG_LOOPBACK_TYPE_INTERNAL); + else + bf_set(lpfc_mbx_set_diag_lpbk_type, + &link_diag_loopback->u.req, + LPFC_DIAG_LOOPBACK_TYPE_EXTERNAL); + + mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO); + if ((mbxstatus != MBX_SUCCESS) || (pmboxq->u.mb.mbxStatus)) + rc = -ENODEV; + else { + phba->link_flag |= LS_LOOPBACK_MODE; + /* wait for the link attention interrupt */ + msleep(100); + i = 0; + while (phba->link_state != LPFC_HBA_READY) { + if (i++ > timeout) { + rc = -ETIMEDOUT; + break; + } + msleep(10); + } + } + +loopback_mode_exit: + lpfc_bsg_diag_mode_exit(phba); + + /* + * Let SLI layer release mboxq if mbox command completed after timeout. + */ + if (pmboxq && (mbxstatus != MBX_TIMEOUT)) + mempool_free(pmboxq, phba->mbox_mem_pool); + +job_error: + /* make error code available to userspace */ + job->reply->result = rc; + /* complete the job back to userspace if no error */ + if (rc == 0) + job->job_done(job); + return rc; } /** - * lpfcdiag_loop_get_xri - obtains the transmit and receive ids - * @phba: Pointer to HBA context object - * @rpi: Remote port login id - * @txxri: Pointer to transmit exchange id - * @rxxri: Pointer to response exchabge id + * lpfc_bsg_diag_loopback_mode - bsg vendor command for diag loopback mode + * @job: LPFC_BSG_VENDOR_DIAG_MODE * - * This function obtains the transmit and receive ids required to send - * an unsolicited ct command with a payload. A special lpfc FsType and CmdRsp - * flags are used to the unsolicted response handler is able to process - * the ct command sent on the same port. - **/ -static int lpfcdiag_loop_get_xri(struct lpfc_hba *phba, uint16_t rpi, - uint16_t *txxri, uint16_t * rxxri) + * This function is responsible for responding to check and dispatch bsg diag + * command from the user to proper driver action routines. + */ +static int +lpfc_bsg_diag_loopback_mode(struct fc_bsg_job *job) +{ + struct Scsi_Host *shost; + struct lpfc_vport *vport; + struct lpfc_hba *phba; + int rc; + + shost = job->shost; + if (!shost) + return -ENODEV; + vport = (struct lpfc_vport *)job->shost->hostdata; + if (!vport) + return -ENODEV; + phba = vport->phba; + if (!phba) + return -ENODEV; + + if (phba->sli_rev < LPFC_SLI_REV4) + rc = lpfc_sli3_bsg_diag_loopback_mode(phba, job); + else if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == + LPFC_SLI_INTF_IF_TYPE_2) + rc = lpfc_sli4_bsg_diag_loopback_mode(phba, job); + else + rc = -ENODEV; + + return rc; + +} + +/** + * lpfc_sli4_bsg_diag_mode_end - sli4 bsg vendor command for ending diag mode + * @job: LPFC_BSG_VENDOR_DIAG_MODE_END + * + * This function is responsible for responding to check and dispatch bsg diag + * command from the user to proper driver action routines. + */ +static int +lpfc_sli4_bsg_diag_mode_end(struct fc_bsg_job *job) +{ + struct Scsi_Host *shost; + struct lpfc_vport *vport; + struct lpfc_hba *phba; + int rc; + + shost = job->shost; + if (!shost) + return -ENODEV; + vport = (struct lpfc_vport *)job->shost->hostdata; + if (!vport) + return -ENODEV; + phba = vport->phba; + if (!phba) + return -ENODEV; + + if (phba->sli_rev < LPFC_SLI_REV4) + return -ENODEV; + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) + return -ENODEV; + + rc = lpfc_sli4_bsg_set_link_diag_state(phba, 0); + + if (!rc) + rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT); + + return rc; +} + +/** + * lpfc_sli4_bsg_link_diag_test - sli4 bsg vendor command for diag link test + * @job: LPFC_BSG_VENDOR_DIAG_LINK_TEST + * + * This function is to perform SLI4 diag link test request from the user + * applicaiton. + */ +static int +lpfc_sli4_bsg_link_diag_test(struct fc_bsg_job *job) +{ + struct Scsi_Host *shost; + struct lpfc_vport *vport; + struct lpfc_hba *phba; + LPFC_MBOXQ_t *pmboxq; + struct sli4_link_diag *link_diag_test_cmd; + uint32_t req_len, alloc_len; + uint32_t timeout; + struct lpfc_mbx_run_link_diag_test *run_link_diag_test; + union lpfc_sli4_cfg_shdr *shdr; + uint32_t shdr_status, shdr_add_status; + struct diag_status *diag_status_reply; + int mbxstatus, rc = 0; + + shost = job->shost; + if (!shost) { + rc = -ENODEV; + goto job_error; + } + vport = (struct lpfc_vport *)job->shost->hostdata; + if (!vport) { + rc = -ENODEV; + goto job_error; + } + phba = vport->phba; + if (!phba) { + rc = -ENODEV; + goto job_error; + } + + if (phba->sli_rev < LPFC_SLI_REV4) { + rc = -ENODEV; + goto job_error; + } + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) { + rc = -ENODEV; + goto job_error; + } + + if (job->request_len < sizeof(struct fc_bsg_request) + + sizeof(struct sli4_link_diag)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "3013 Received LINK DIAG TEST request " + " size:%d below the minimum size:%d\n", + job->request_len, + (int)(sizeof(struct fc_bsg_request) + + sizeof(struct sli4_link_diag))); + rc = -EINVAL; + goto job_error; + } + + rc = lpfc_bsg_diag_mode_enter(phba, job); + if (rc) + goto job_error; + + link_diag_test_cmd = (struct sli4_link_diag *) + job->request->rqst_data.h_vendor.vendor_cmd; + timeout = link_diag_test_cmd->timeout * 100; + + rc = lpfc_sli4_bsg_set_link_diag_state(phba, 1); + + if (rc) + goto job_error; + + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) { + rc = -ENOMEM; + goto link_diag_test_exit; + } + + req_len = (sizeof(struct lpfc_mbx_set_link_diag_state) - + sizeof(struct lpfc_sli4_cfg_mhdr)); + alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE, + LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE, + req_len, LPFC_SLI4_MBX_EMBED); + if (alloc_len != req_len) { + rc = -ENOMEM; + goto link_diag_test_exit; + } + run_link_diag_test = &pmboxq->u.mqe.un.link_diag_test; + bf_set(lpfc_mbx_run_diag_test_link_num, &run_link_diag_test->u.req, + phba->sli4_hba.link_state.number); + bf_set(lpfc_mbx_run_diag_test_link_type, &run_link_diag_test->u.req, + phba->sli4_hba.link_state.type); + bf_set(lpfc_mbx_run_diag_test_test_id, &run_link_diag_test->u.req, + link_diag_test_cmd->test_id); + bf_set(lpfc_mbx_run_diag_test_loops, &run_link_diag_test->u.req, + link_diag_test_cmd->loops); + bf_set(lpfc_mbx_run_diag_test_test_ver, &run_link_diag_test->u.req, + link_diag_test_cmd->test_version); + bf_set(lpfc_mbx_run_diag_test_err_act, &run_link_diag_test->u.req, + link_diag_test_cmd->error_action); + + mbxstatus = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); + + shdr = (union lpfc_sli4_cfg_shdr *) + &pmboxq->u.mqe.un.sli4_config.header.cfg_shdr; + shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); + shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); + if (shdr_status || shdr_add_status || mbxstatus) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "3010 Run link diag test mailbox failed with " + "mbx_status x%x status x%x, add_status x%x\n", + mbxstatus, shdr_status, shdr_add_status); + } + + diag_status_reply = (struct diag_status *) + job->reply->reply_data.vendor_reply.vendor_rsp; + + if (job->reply_len < + sizeof(struct fc_bsg_request) + sizeof(struct diag_status)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "3012 Received Run link diag test reply " + "below minimum size (%d): reply_len:%d\n", + (int)(sizeof(struct fc_bsg_request) + + sizeof(struct diag_status)), + job->reply_len); + rc = -EINVAL; + goto job_error; + } + + diag_status_reply->mbox_status = mbxstatus; + diag_status_reply->shdr_status = shdr_status; + diag_status_reply->shdr_add_status = shdr_add_status; + +link_diag_test_exit: + rc = lpfc_sli4_bsg_set_link_diag_state(phba, 0); + + if (pmboxq) + mempool_free(pmboxq, phba->mbox_mem_pool); + + lpfc_bsg_diag_mode_exit(phba); + +job_error: + /* make error code available to userspace */ + job->reply->result = rc; + /* complete the job back to userspace if no error */ + if (rc == 0) + job->job_done(job); + return rc; +} + +/** + * lpfcdiag_loop_self_reg - obtains a remote port login id + * @phba: Pointer to HBA context object + * @rpi: Pointer to a remote port login id + * + * This function obtains a remote port login id so the diag loopback test + * can send and receive its own unsolicited CT command. + **/ +static int lpfcdiag_loop_self_reg(struct lpfc_hba *phba, uint16_t *rpi) +{ + LPFC_MBOXQ_t *mbox; + struct lpfc_dmabuf *dmabuff; + int status; + + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!mbox) + return -ENOMEM; + + if (phba->sli_rev == LPFC_SLI_REV4) + *rpi = lpfc_sli4_alloc_rpi(phba); + status = lpfc_reg_rpi(phba, 0, phba->pport->fc_myDID, + (uint8_t *)&phba->pport->fc_sparam, mbox, *rpi); + if (status) { + mempool_free(mbox, phba->mbox_mem_pool); + if (phba->sli_rev == LPFC_SLI_REV4) + lpfc_sli4_free_rpi(phba, *rpi); + return -ENOMEM; + } + + dmabuff = (struct lpfc_dmabuf *) mbox->context1; + mbox->context1 = NULL; + mbox->context2 = NULL; + status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); + + if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) { + lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys); + kfree(dmabuff); + if (status != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + if (phba->sli_rev == LPFC_SLI_REV4) + lpfc_sli4_free_rpi(phba, *rpi); + return -ENODEV; + } + + *rpi = mbox->u.mb.un.varWords[0]; + + lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys); + kfree(dmabuff); + mempool_free(mbox, phba->mbox_mem_pool); + return 0; +} + +/** + * lpfcdiag_loop_self_unreg - unregs from the rpi + * @phba: Pointer to HBA context object + * @rpi: Remote port login id + * + * This function unregisters the rpi obtained in lpfcdiag_loop_self_reg + **/ +static int lpfcdiag_loop_self_unreg(struct lpfc_hba *phba, uint16_t rpi) +{ + LPFC_MBOXQ_t *mbox; + int status; + + /* Allocate mboxq structure */ + mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (mbox == NULL) + return -ENOMEM; + + lpfc_unreg_login(phba, 0, rpi, mbox); + status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); + + if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) { + if (status != MBX_TIMEOUT) + mempool_free(mbox, phba->mbox_mem_pool); + return -EIO; + } + mempool_free(mbox, phba->mbox_mem_pool); + if (phba->sli_rev == LPFC_SLI_REV4) + lpfc_sli4_free_rpi(phba, rpi); + return 0; +} + +/** + * lpfcdiag_loop_get_xri - obtains the transmit and receive ids + * @phba: Pointer to HBA context object + * @rpi: Remote port login id + * @txxri: Pointer to transmit exchange id + * @rxxri: Pointer to response exchabge id + * + * This function obtains the transmit and receive ids required to send + * an unsolicited ct command with a payload. A special lpfc FsType and CmdRsp + * flags are used to the unsolicted response handler is able to process + * the ct command sent on the same port. + **/ +static int lpfcdiag_loop_get_xri(struct lpfc_hba *phba, uint16_t rpi, + uint16_t *txxri, uint16_t * rxxri) { struct lpfc_bsg_event *evt; struct lpfc_iocbq *cmdiocbq, *rspiocbq; @@ -1856,6 +2302,86 @@ err_get_xri_exit: return ret_val; } +/** + * lpfc_bsg_dma_page_alloc - allocate a bsg mbox page sized dma buffers + * @phba: Pointer to HBA context object + * + * This function allocates BSG_MBOX_SIZE (4KB) page size dma buffer and. + * retruns the pointer to the buffer. + **/ +static struct lpfc_dmabuf * +lpfc_bsg_dma_page_alloc(struct lpfc_hba *phba) +{ + struct lpfc_dmabuf *dmabuf; + struct pci_dev *pcidev = phba->pcidev; + + /* allocate dma buffer struct */ + dmabuf = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); + if (!dmabuf) + return NULL; + + INIT_LIST_HEAD(&dmabuf->list); + + /* now, allocate dma buffer */ + dmabuf->virt = dma_alloc_coherent(&pcidev->dev, BSG_MBOX_SIZE, + &(dmabuf->phys), GFP_KERNEL); + + if (!dmabuf->virt) { + kfree(dmabuf); + return NULL; + } + memset((uint8_t *)dmabuf->virt, 0, BSG_MBOX_SIZE); + + return dmabuf; +} + +/** + * lpfc_bsg_dma_page_free - free a bsg mbox page sized dma buffer + * @phba: Pointer to HBA context object. + * @dmabuf: Pointer to the bsg mbox page sized dma buffer descriptor. + * + * This routine just simply frees a dma buffer and its associated buffer + * descriptor referred by @dmabuf. + **/ +static void +lpfc_bsg_dma_page_free(struct lpfc_hba *phba, struct lpfc_dmabuf *dmabuf) +{ + struct pci_dev *pcidev = phba->pcidev; + + if (!dmabuf) + return; + + if (dmabuf->virt) + dma_free_coherent(&pcidev->dev, BSG_MBOX_SIZE, + dmabuf->virt, dmabuf->phys); + kfree(dmabuf); + return; +} + +/** + * lpfc_bsg_dma_page_list_free - free a list of bsg mbox page sized dma buffers + * @phba: Pointer to HBA context object. + * @dmabuf_list: Pointer to a list of bsg mbox page sized dma buffer descs. + * + * This routine just simply frees all dma buffers and their associated buffer + * descriptors referred by @dmabuf_list. + **/ +static void +lpfc_bsg_dma_page_list_free(struct lpfc_hba *phba, + struct list_head *dmabuf_list) +{ + struct lpfc_dmabuf *dmabuf, *next_dmabuf; + + if (list_empty(dmabuf_list)) + return; + + list_for_each_entry_safe(dmabuf, next_dmabuf, dmabuf_list, list) { + list_del_init(&dmabuf->list); + lpfc_bsg_dma_page_free(phba, dmabuf); + } + return; +} + /** * diag_cmd_data_alloc - fills in a bde struct with dma buffers * @phba: Pointer to HBA context object @@ -2073,7 +2599,7 @@ err_post_rxbufs_exit: } /** - * lpfc_bsg_diag_test - with a port in loopback issues a Ct cmd to itself + * lpfc_bsg_diag_loopback_run - run loopback on a port by issue ct cmd to itself * @job: LPFC_BSG_VENDOR_DIAG_TEST fc_bsg_job * * This function receives a user data buffer to be transmitted and received on @@ -2092,7 +2618,7 @@ err_post_rxbufs_exit: * of loopback mode. **/ static int -lpfc_bsg_diag_test(struct fc_bsg_job *job) +lpfc_bsg_diag_loopback_run(struct fc_bsg_job *job) { struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; struct lpfc_hba *phba = vport->phba; @@ -2417,7 +2943,7 @@ job_error: } /** - * lpfc_bsg_wake_mbox_wait - lpfc_bsg_issue_mbox mbox completion handler + * lpfc_bsg_issue_mbox_cmpl - lpfc_bsg_issue_mbox mbox completion handler * @phba: Pointer to HBA context object. * @pmboxq: Pointer to mailbox command. * @@ -2428,15 +2954,13 @@ job_error: * of the mailbox. **/ void -lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) +lpfc_bsg_issue_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) { struct bsg_job_data *dd_data; struct fc_bsg_job *job; - struct lpfc_mbx_nembed_cmd *nembed_sge; uint32_t size; unsigned long flags; - uint8_t *to; - uint8_t *from; + uint8_t *pmb, *pmb_buf; spin_lock_irqsave(&phba->ct_ev_lock, flags); dd_data = pmboxq->context1; @@ -2446,62 +2970,21 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) return; } - /* build the outgoing buffer to do an sg copy - * the format is the response mailbox followed by any extended - * mailbox data + /* + * The outgoing buffer is readily referred from the dma buffer, + * just need to get header part from mailboxq structure. */ - from = (uint8_t *)&pmboxq->u.mb; - to = (uint8_t *)dd_data->context_un.mbox.mb; - memcpy(to, from, sizeof(MAILBOX_t)); - if (pmboxq->u.mb.mbxStatus == MBX_SUCCESS) { - /* copy the extended data if any, count is in words */ - if (dd_data->context_un.mbox.outExtWLen) { - from = (uint8_t *)dd_data->context_un.mbox.ext; - to += sizeof(MAILBOX_t); - size = dd_data->context_un.mbox.outExtWLen * - sizeof(uint32_t); - memcpy(to, from, size); - } else if (pmboxq->u.mb.mbxCommand == MBX_RUN_BIU_DIAG64) { - from = (uint8_t *)dd_data->context_un.mbox. - dmp->dma.virt; - to += sizeof(MAILBOX_t); - size = dd_data->context_un.mbox.dmp->size; - memcpy(to, from, size); - } else if ((phba->sli_rev == LPFC_SLI_REV4) && - (pmboxq->u.mb.mbxCommand == MBX_DUMP_MEMORY)) { - from = (uint8_t *)dd_data->context_un.mbox.dmp->dma. - virt; - to += sizeof(MAILBOX_t); - size = pmboxq->u.mb.un.varWords[5]; - memcpy(to, from, size); - } else if ((phba->sli_rev == LPFC_SLI_REV4) && - (pmboxq->u.mb.mbxCommand == MBX_SLI4_CONFIG)) { - nembed_sge = (struct lpfc_mbx_nembed_cmd *) - &pmboxq->u.mb.un.varWords[0]; - - from = (uint8_t *)dd_data->context_un.mbox.dmp->dma. - virt; - to += sizeof(MAILBOX_t); - size = nembed_sge->sge[0].length; - memcpy(to, from, size); - } else if (pmboxq->u.mb.mbxCommand == MBX_READ_EVENT_LOG) { - from = (uint8_t *)dd_data->context_un. - mbox.dmp->dma.virt; - to += sizeof(MAILBOX_t); - size = dd_data->context_un.mbox.dmp->size; - memcpy(to, from, size); - } - } + pmb = (uint8_t *)&pmboxq->u.mb; + pmb_buf = (uint8_t *)dd_data->context_un.mbox.mb; + memcpy(pmb_buf, pmb, sizeof(MAILBOX_t)); - from = (uint8_t *)dd_data->context_un.mbox.mb; job = dd_data->context_un.mbox.set_job; if (job) { size = job->reply_payload.payload_len; job->reply->reply_payload_rcv_len = sg_copy_from_buffer(job->reply_payload.sg_list, - job->reply_payload.sg_cnt, - from, size); - job->reply->result = 0; + job->reply_payload.sg_cnt, + pmb_buf, size); /* need to hold the lock until we set job->dd_data to NULL * to hold off the timeout handler returning to the mid-layer * while we are still processing the job. @@ -2509,119 +2992,1110 @@ lpfc_bsg_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) job->dd_data = NULL; dd_data->context_un.mbox.set_job = NULL; spin_unlock_irqrestore(&phba->ct_ev_lock, flags); - job->job_done(job); } else { dd_data->context_un.mbox.set_job = NULL; spin_unlock_irqrestore(&phba->ct_ev_lock, flags); } - kfree(dd_data->context_un.mbox.mb); mempool_free(dd_data->context_un.mbox.pmboxq, phba->mbox_mem_pool); - kfree(dd_data->context_un.mbox.ext); - if (dd_data->context_un.mbox.dmp) { - dma_free_coherent(&phba->pcidev->dev, - dd_data->context_un.mbox.dmp->size, - dd_data->context_un.mbox.dmp->dma.virt, - dd_data->context_un.mbox.dmp->dma.phys); - kfree(dd_data->context_un.mbox.dmp); - } - if (dd_data->context_un.mbox.rxbmp) { - lpfc_mbuf_free(phba, dd_data->context_un.mbox.rxbmp->virt, - dd_data->context_un.mbox.rxbmp->phys); - kfree(dd_data->context_un.mbox.rxbmp); + lpfc_bsg_dma_page_free(phba, dd_data->context_un.mbox.dmabuffers); + kfree(dd_data); + + if (job) { + job->reply->result = 0; + job->job_done(job); + } + return; +} + +/** + * lpfc_bsg_check_cmd_access - test for a supported mailbox command + * @phba: Pointer to HBA context object. + * @mb: Pointer to a mailbox object. + * @vport: Pointer to a vport object. + * + * Some commands require the port to be offline, some may not be called from + * the application. + **/ +static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba, + MAILBOX_t *mb, struct lpfc_vport *vport) +{ + /* return negative error values for bsg job */ + switch (mb->mbxCommand) { + /* Offline only */ + case MBX_INIT_LINK: + case MBX_DOWN_LINK: + case MBX_CONFIG_LINK: + case MBX_CONFIG_RING: + case MBX_RESET_RING: + case MBX_UNREG_LOGIN: + case MBX_CLEAR_LA: + case MBX_DUMP_CONTEXT: + case MBX_RUN_DIAGS: + case MBX_RESTART: + case MBX_SET_MASK: + if (!(vport->fc_flag & FC_OFFLINE_MODE)) { + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "2743 Command 0x%x is illegal in on-line " + "state\n", + mb->mbxCommand); + return -EPERM; + } + case MBX_WRITE_NV: + case MBX_WRITE_VPARMS: + case MBX_LOAD_SM: + case MBX_READ_NV: + case MBX_READ_CONFIG: + case MBX_READ_RCONFIG: + case MBX_READ_STATUS: + case MBX_READ_XRI: + case MBX_READ_REV: + case MBX_READ_LNK_STAT: + case MBX_DUMP_MEMORY: + case MBX_DOWN_LOAD: + case MBX_UPDATE_CFG: + case MBX_KILL_BOARD: + case MBX_LOAD_AREA: + case MBX_LOAD_EXP_ROM: + case MBX_BEACON: + case MBX_DEL_LD_ENTRY: + case MBX_SET_DEBUG: + case MBX_WRITE_WWN: + case MBX_SLI4_CONFIG: + case MBX_READ_EVENT_LOG: + case MBX_READ_EVENT_LOG_STATUS: + case MBX_WRITE_EVENT_LOG: + case MBX_PORT_CAPABILITIES: + case MBX_PORT_IOV_CONTROL: + case MBX_RUN_BIU_DIAG64: + break; + case MBX_SET_VARIABLE: + lpfc_printf_log(phba, KERN_INFO, LOG_INIT, + "1226 mbox: set_variable 0x%x, 0x%x\n", + mb->un.varWords[0], + mb->un.varWords[1]); + if ((mb->un.varWords[0] == SETVAR_MLOMNT) + && (mb->un.varWords[1] == 1)) { + phba->wait_4_mlo_maint_flg = 1; + } else if (mb->un.varWords[0] == SETVAR_MLORST) { + phba->link_flag &= ~LS_LOOPBACK_MODE; + phba->fc_topology = LPFC_TOPOLOGY_PT_PT; + } + break; + case MBX_READ_SPARM64: + case MBX_READ_TOPOLOGY: + case MBX_REG_LOGIN: + case MBX_REG_LOGIN64: + case MBX_CONFIG_PORT: + case MBX_RUN_BIU_DIAG: + default: + lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, + "2742 Unknown Command 0x%x\n", + mb->mbxCommand); + return -EPERM; + } + + return 0; /* ok */ +} + +/** + * lpfc_bsg_mbox_ext_cleanup - clean up context of multi-buffer mbox session + * @phba: Pointer to HBA context object. + * + * This is routine clean up and reset BSG handling of multi-buffer mbox + * command session. + **/ +static void +lpfc_bsg_mbox_ext_session_reset(struct lpfc_hba *phba) +{ + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE) + return; + + /* free all memory, including dma buffers */ + lpfc_bsg_dma_page_list_free(phba, + &phba->mbox_ext_buf_ctx.ext_dmabuf_list); + lpfc_bsg_dma_page_free(phba, phba->mbox_ext_buf_ctx.mbx_dmabuf); + /* multi-buffer write mailbox command pass-through complete */ + memset((char *)&phba->mbox_ext_buf_ctx, 0, + sizeof(struct lpfc_mbox_ext_buf_ctx)); + INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list); + + return; +} + +/** + * lpfc_bsg_issue_mbox_ext_handle_job - job handler for multi-buffer mbox cmpl + * @phba: Pointer to HBA context object. + * @pmboxq: Pointer to mailbox command. + * + * This is routine handles BSG job for mailbox commands completions with + * multiple external buffers. + **/ +static struct fc_bsg_job * +lpfc_bsg_issue_mbox_ext_handle_job(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) +{ + struct bsg_job_data *dd_data; + struct fc_bsg_job *job; + uint8_t *pmb, *pmb_buf; + unsigned long flags; + uint32_t size; + int rc = 0; + + spin_lock_irqsave(&phba->ct_ev_lock, flags); + dd_data = pmboxq->context1; + /* has the job already timed out? */ + if (!dd_data) { + spin_unlock_irqrestore(&phba->ct_ev_lock, flags); + job = NULL; + goto job_done_out; + } + + /* + * The outgoing buffer is readily referred from the dma buffer, + * just need to get header part from mailboxq structure. + */ + pmb = (uint8_t *)&pmboxq->u.mb; + pmb_buf = (uint8_t *)dd_data->context_un.mbox.mb; + memcpy(pmb_buf, pmb, sizeof(MAILBOX_t)); + + job = dd_data->context_un.mbox.set_job; + if (job) { + size = job->reply_payload.payload_len; + job->reply->reply_payload_rcv_len = + sg_copy_from_buffer(job->reply_payload.sg_list, + job->reply_payload.sg_cnt, + pmb_buf, size); + /* result for successful */ + job->reply->result = 0; + job->dd_data = NULL; + /* need to hold the lock util we set job->dd_data to NULL + * to hold off the timeout handler from midlayer to take + * any action. + */ + spin_unlock_irqrestore(&phba->ct_ev_lock, flags); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2937 SLI_CONFIG ext-buffer maibox command " + "(x%x/x%x) complete bsg job done, bsize:%d\n", + phba->mbox_ext_buf_ctx.nembType, + phba->mbox_ext_buf_ctx.mboxType, size); + } else + spin_unlock_irqrestore(&phba->ct_ev_lock, flags); + +job_done_out: + if (!job) + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2938 SLI_CONFIG ext-buffer maibox " + "command (x%x/x%x) failure, rc:x%x\n", + phba->mbox_ext_buf_ctx.nembType, + phba->mbox_ext_buf_ctx.mboxType, rc); + /* state change */ + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_DONE; + kfree(dd_data); + + return job; +} + +/** + * lpfc_bsg_issue_read_mbox_ext_cmpl - compl handler for multi-buffer read mbox + * @phba: Pointer to HBA context object. + * @pmboxq: Pointer to mailbox command. + * + * This is completion handler function for mailbox read commands with multiple + * external buffers. + **/ +static void +lpfc_bsg_issue_read_mbox_ext_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) +{ + struct fc_bsg_job *job; + + /* handle the BSG job with mailbox command */ + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_ABTS) + pmboxq->u.mb.mbxStatus = MBXERR_ERROR; + + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2939 SLI_CONFIG ext-buffer rd maibox command " + "complete, ctxState:x%x, mbxStatus:x%x\n", + phba->mbox_ext_buf_ctx.state, pmboxq->u.mb.mbxStatus); + + job = lpfc_bsg_issue_mbox_ext_handle_job(phba, pmboxq); + + if (pmboxq->u.mb.mbxStatus || phba->mbox_ext_buf_ctx.numBuf == 1) + lpfc_bsg_mbox_ext_session_reset(phba); + + /* free base driver mailbox structure memory */ + mempool_free(pmboxq, phba->mbox_mem_pool); + + /* complete the bsg job if we have it */ + if (job) + job->job_done(job); + + return; +} + +/** + * lpfc_bsg_issue_write_mbox_ext_cmpl - cmpl handler for multi-buffer write mbox + * @phba: Pointer to HBA context object. + * @pmboxq: Pointer to mailbox command. + * + * This is completion handler function for mailbox write commands with multiple + * external buffers. + **/ +static void +lpfc_bsg_issue_write_mbox_ext_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) +{ + struct fc_bsg_job *job; + + /* handle the BSG job with the mailbox command */ + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_ABTS) + pmboxq->u.mb.mbxStatus = MBXERR_ERROR; + + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2940 SLI_CONFIG ext-buffer wr maibox command " + "complete, ctxState:x%x, mbxStatus:x%x\n", + phba->mbox_ext_buf_ctx.state, pmboxq->u.mb.mbxStatus); + + job = lpfc_bsg_issue_mbox_ext_handle_job(phba, pmboxq); + + /* free all memory, including dma buffers */ + mempool_free(pmboxq, phba->mbox_mem_pool); + lpfc_bsg_mbox_ext_session_reset(phba); + + /* complete the bsg job if we have it */ + if (job) + job->job_done(job); + + return; +} + +static void +lpfc_bsg_sli_cfg_dma_desc_setup(struct lpfc_hba *phba, enum nemb_type nemb_tp, + uint32_t index, struct lpfc_dmabuf *mbx_dmabuf, + struct lpfc_dmabuf *ext_dmabuf) +{ + struct lpfc_sli_config_mbox *sli_cfg_mbx; + + /* pointer to the start of mailbox command */ + sli_cfg_mbx = (struct lpfc_sli_config_mbox *)mbx_dmabuf->virt; + + if (nemb_tp == nemb_mse) { + if (index == 0) { + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_hi = + putPaddrHigh(mbx_dmabuf->phys + + sizeof(MAILBOX_t)); + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_lo = + putPaddrLow(mbx_dmabuf->phys + + sizeof(MAILBOX_t)); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2943 SLI_CONFIG(mse)[%d], " + "bufLen:%d, addrHi:x%x, addrLo:x%x\n", + index, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].buf_len, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_hi, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_lo); + } else { + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_hi = + putPaddrHigh(ext_dmabuf->phys); + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_lo = + putPaddrLow(ext_dmabuf->phys); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2944 SLI_CONFIG(mse)[%d], " + "bufLen:%d, addrHi:x%x, addrLo:x%x\n", + index, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].buf_len, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_hi, + sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[index].pa_lo); + } + } else { + if (index == 0) { + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_hi = + putPaddrHigh(mbx_dmabuf->phys + + sizeof(MAILBOX_t)); + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_lo = + putPaddrLow(mbx_dmabuf->phys + + sizeof(MAILBOX_t)); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "3007 SLI_CONFIG(hbd)[%d], " + "bufLen:%d, addrHi:x%x, addrLo:x%x\n", + index, + bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, + &sli_cfg_mbx->un. + sli_config_emb1_subsys.hbd[index]), + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_hi, + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_lo); + + } else { + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_hi = + putPaddrHigh(ext_dmabuf->phys); + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_lo = + putPaddrLow(ext_dmabuf->phys); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "3008 SLI_CONFIG(hbd)[%d], " + "bufLen:%d, addrHi:x%x, addrLo:x%x\n", + index, + bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, + &sli_cfg_mbx->un. + sli_config_emb1_subsys.hbd[index]), + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_hi, + sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[index].pa_lo); + } + } + return; +} + +/** + * lpfc_bsg_sli_cfg_mse_read_cmd_ext - sli_config non-embedded mailbox cmd read + * @phba: Pointer to HBA context object. + * @mb: Pointer to a BSG mailbox object. + * @nemb_tp: Enumerate of non-embedded mailbox command type. + * @dmabuff: Pointer to a DMA buffer descriptor. + * + * This routine performs SLI_CONFIG (0x9B) read mailbox command operation with + * non-embedded external bufffers. + **/ +static int +lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, + enum nemb_type nemb_tp, + struct lpfc_dmabuf *dmabuf) +{ + struct lpfc_sli_config_mbox *sli_cfg_mbx; + struct dfc_mbox_req *mbox_req; + struct lpfc_dmabuf *curr_dmabuf, *next_dmabuf; + uint32_t ext_buf_cnt, ext_buf_index; + struct lpfc_dmabuf *ext_dmabuf = NULL; + struct bsg_job_data *dd_data = NULL; + LPFC_MBOXQ_t *pmboxq = NULL; + MAILBOX_t *pmb; + uint8_t *pmbx; + int rc, i; + + mbox_req = + (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; + + /* pointer to the start of mailbox command */ + sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; + + if (nemb_tp == nemb_mse) { + ext_buf_cnt = bsg_bf_get(lpfc_mbox_hdr_mse_cnt, + &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr); + if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_MSE) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2945 Handled SLI_CONFIG(mse) rd, " + "ext_buf_cnt(%d) out of range(%d)\n", + ext_buf_cnt, + LPFC_MBX_SLI_CONFIG_MAX_MSE); + rc = -ERANGE; + goto job_error; + } + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2941 Handled SLI_CONFIG(mse) rd, " + "ext_buf_cnt:%d\n", ext_buf_cnt); + } else { + /* sanity check on interface type for support */ + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) { + rc = -ENODEV; + goto job_error; + } + /* nemb_tp == nemb_hbd */ + ext_buf_cnt = sli_cfg_mbx->un.sli_config_emb1_subsys.hbd_count; + if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_HBD) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2946 Handled SLI_CONFIG(hbd) rd, " + "ext_buf_cnt(%d) out of range(%d)\n", + ext_buf_cnt, + LPFC_MBX_SLI_CONFIG_MAX_HBD); + rc = -ERANGE; + goto job_error; + } + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2942 Handled SLI_CONFIG(hbd) rd, " + "ext_buf_cnt:%d\n", ext_buf_cnt); + } + + /* reject non-embedded mailbox command with none external buffer */ + if (ext_buf_cnt == 0) { + rc = -EPERM; + goto job_error; + } else if (ext_buf_cnt > 1) { + /* additional external read buffers */ + for (i = 1; i < ext_buf_cnt; i++) { + ext_dmabuf = lpfc_bsg_dma_page_alloc(phba); + if (!ext_dmabuf) { + rc = -ENOMEM; + goto job_error; + } + list_add_tail(&ext_dmabuf->list, + &phba->mbox_ext_buf_ctx.ext_dmabuf_list); + } + } + + /* bsg tracking structure */ + dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); + if (!dd_data) { + rc = -ENOMEM; + goto job_error; + } + + /* mailbox command structure for base driver */ + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) { + rc = -ENOMEM; + goto job_error; + } + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + + /* for the first external buffer */ + lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, 0, dmabuf, dmabuf); + + /* for the rest of external buffer descriptors if any */ + if (ext_buf_cnt > 1) { + ext_buf_index = 1; + list_for_each_entry_safe(curr_dmabuf, next_dmabuf, + &phba->mbox_ext_buf_ctx.ext_dmabuf_list, list) { + lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, + ext_buf_index, dmabuf, + curr_dmabuf); + ext_buf_index++; + } + } + + /* construct base driver mbox command */ + pmb = &pmboxq->u.mb; + pmbx = (uint8_t *)dmabuf->virt; + memcpy(pmb, pmbx, sizeof(*pmb)); + pmb->mbxOwner = OWN_HOST; + pmboxq->vport = phba->pport; + + /* multi-buffer handling context */ + phba->mbox_ext_buf_ctx.nembType = nemb_tp; + phba->mbox_ext_buf_ctx.mboxType = mbox_rd; + phba->mbox_ext_buf_ctx.numBuf = ext_buf_cnt; + phba->mbox_ext_buf_ctx.mbxTag = mbox_req->extMboxTag; + phba->mbox_ext_buf_ctx.seqNum = mbox_req->extSeqNum; + phba->mbox_ext_buf_ctx.mbx_dmabuf = dmabuf; + + /* callback for multi-buffer read mailbox command */ + pmboxq->mbox_cmpl = lpfc_bsg_issue_read_mbox_ext_cmpl; + + /* context fields to callback function */ + pmboxq->context1 = dd_data; + dd_data->type = TYPE_MBOX; + dd_data->context_un.mbox.pmboxq = pmboxq; + dd_data->context_un.mbox.mb = (MAILBOX_t *)pmbx; + dd_data->context_un.mbox.set_job = job; + job->dd_data = dd_data; + + /* state change */ + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT; + + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); + if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2947 Issued SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + return 1; + } + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2948 Failed to issue SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + rc = -EPIPE; + +job_error: + if (pmboxq) + mempool_free(pmboxq, phba->mbox_mem_pool); + lpfc_bsg_dma_page_list_free(phba, + &phba->mbox_ext_buf_ctx.ext_dmabuf_list); + kfree(dd_data); + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_IDLE; + return rc; +} + +/** + * lpfc_bsg_sli_cfg_write_cmd_ext - sli_config non-embedded mailbox cmd write + * @phba: Pointer to HBA context object. + * @mb: Pointer to a BSG mailbox object. + * @dmabuff: Pointer to a DMA buffer descriptor. + * + * This routine performs SLI_CONFIG (0x9B) write mailbox command operation with + * non-embedded external bufffers. + **/ +static int +lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, + enum nemb_type nemb_tp, + struct lpfc_dmabuf *dmabuf) +{ + struct dfc_mbox_req *mbox_req; + struct lpfc_sli_config_mbox *sli_cfg_mbx; + uint32_t ext_buf_cnt; + struct bsg_job_data *dd_data = NULL; + LPFC_MBOXQ_t *pmboxq = NULL; + MAILBOX_t *pmb; + uint8_t *mbx; + int rc = 0, i; + + mbox_req = + (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; + + /* pointer to the start of mailbox command */ + sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; + + if (nemb_tp == nemb_mse) { + ext_buf_cnt = bsg_bf_get(lpfc_mbox_hdr_mse_cnt, + &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr); + if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_MSE) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2953 Handled SLI_CONFIG(mse) wr, " + "ext_buf_cnt(%d) out of range(%d)\n", + ext_buf_cnt, + LPFC_MBX_SLI_CONFIG_MAX_MSE); + return -ERANGE; + } + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2949 Handled SLI_CONFIG(mse) wr, " + "ext_buf_cnt:%d\n", ext_buf_cnt); + } else { + /* sanity check on interface type for support */ + if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != + LPFC_SLI_INTF_IF_TYPE_2) + return -ENODEV; + /* nemb_tp == nemb_hbd */ + ext_buf_cnt = sli_cfg_mbx->un.sli_config_emb1_subsys.hbd_count; + if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_HBD) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2954 Handled SLI_CONFIG(hbd) wr, " + "ext_buf_cnt(%d) out of range(%d)\n", + ext_buf_cnt, + LPFC_MBX_SLI_CONFIG_MAX_HBD); + return -ERANGE; + } + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2950 Handled SLI_CONFIG(hbd) wr, " + "ext_buf_cnt:%d\n", ext_buf_cnt); + } + + if (ext_buf_cnt == 0) + return -EPERM; + + /* for the first external buffer */ + lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, 0, dmabuf, dmabuf); + + /* log for looking forward */ + for (i = 1; i < ext_buf_cnt; i++) { + if (nemb_tp == nemb_mse) + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2951 SLI_CONFIG(mse), buf[%d]-length:%d\n", + i, sli_cfg_mbx->un.sli_config_emb0_subsys. + mse[i].buf_len); + else + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2952 SLI_CONFIG(hbd), buf[%d]-length:%d\n", + i, bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, + &sli_cfg_mbx->un.sli_config_emb1_subsys. + hbd[i])); + } + + /* multi-buffer handling context */ + phba->mbox_ext_buf_ctx.nembType = nemb_tp; + phba->mbox_ext_buf_ctx.mboxType = mbox_wr; + phba->mbox_ext_buf_ctx.numBuf = ext_buf_cnt; + phba->mbox_ext_buf_ctx.mbxTag = mbox_req->extMboxTag; + phba->mbox_ext_buf_ctx.seqNum = mbox_req->extSeqNum; + phba->mbox_ext_buf_ctx.mbx_dmabuf = dmabuf; + + if (ext_buf_cnt == 1) { + /* bsg tracking structure */ + dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); + if (!dd_data) { + rc = -ENOMEM; + goto job_error; + } + + /* mailbox command structure for base driver */ + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) { + rc = -ENOMEM; + goto job_error; + } + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + pmb = &pmboxq->u.mb; + mbx = (uint8_t *)dmabuf->virt; + memcpy(pmb, mbx, sizeof(*pmb)); + pmb->mbxOwner = OWN_HOST; + pmboxq->vport = phba->pport; + + /* callback for multi-buffer read mailbox command */ + pmboxq->mbox_cmpl = lpfc_bsg_issue_write_mbox_ext_cmpl; + + /* context fields to callback function */ + pmboxq->context1 = dd_data; + dd_data->type = TYPE_MBOX; + dd_data->context_un.mbox.pmboxq = pmboxq; + dd_data->context_un.mbox.mb = (MAILBOX_t *)mbx; + dd_data->context_un.mbox.set_job = job; + job->dd_data = dd_data; + + /* state change */ + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT; + + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); + if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2955 Issued SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + return 1; + } + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2956 Failed to issue SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + rc = -EPIPE; + } + +job_error: + if (pmboxq) + mempool_free(pmboxq, phba->mbox_mem_pool); + kfree(dd_data); + + return rc; +} + +/** + * lpfc_bsg_handle_sli_cfg_mbox - handle sli-cfg mailbox cmd with ext buffer + * @phba: Pointer to HBA context object. + * @mb: Pointer to a BSG mailbox object. + * @dmabuff: Pointer to a DMA buffer descriptor. + * + * This routine handles SLI_CONFIG (0x9B) mailbox command with non-embedded + * external bufffers, including both 0x9B with non-embedded MSEs and 0x9B + * with embedded sussystem 0x1 and opcodes with external HBDs. + **/ +static int +lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, + struct lpfc_dmabuf *dmabuf) +{ + struct lpfc_sli_config_mbox *sli_cfg_mbx; + uint32_t subsys; + uint32_t opcode; + int rc = SLI_CONFIG_NOT_HANDLED; + + /* state change */ + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_HOST; + + sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; + + if (!bsg_bf_get(lpfc_mbox_hdr_emb, + &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr)) { + subsys = bsg_bf_get(lpfc_emb0_subcmnd_subsys, + &sli_cfg_mbx->un.sli_config_emb0_subsys); + opcode = bsg_bf_get(lpfc_emb0_subcmnd_opcode, + &sli_cfg_mbx->un.sli_config_emb0_subsys); + if (subsys == SLI_CONFIG_SUBSYS_FCOE) { + switch (opcode) { + case FCOE_OPCODE_READ_FCF: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2957 Handled SLI_CONFIG " + "subsys_fcoe, opcode:x%x\n", + opcode); + rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job, + nemb_mse, dmabuf); + break; + case FCOE_OPCODE_ADD_FCF: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2958 Handled SLI_CONFIG " + "subsys_fcoe, opcode:x%x\n", + opcode); + rc = lpfc_bsg_sli_cfg_write_cmd_ext(phba, job, + nemb_mse, dmabuf); + break; + default: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2959 Not handled SLI_CONFIG " + "subsys_fcoe, opcode:x%x\n", + opcode); + rc = SLI_CONFIG_NOT_HANDLED; + break; + } + } else { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2977 Handled SLI_CONFIG " + "subsys:x%d, opcode:x%x\n", + subsys, opcode); + rc = SLI_CONFIG_NOT_HANDLED; + } + } else { + subsys = bsg_bf_get(lpfc_emb1_subcmnd_subsys, + &sli_cfg_mbx->un.sli_config_emb1_subsys); + opcode = bsg_bf_get(lpfc_emb1_subcmnd_opcode, + &sli_cfg_mbx->un.sli_config_emb1_subsys); + if (subsys == SLI_CONFIG_SUBSYS_COMN) { + switch (opcode) { + case COMN_OPCODE_READ_OBJECT: + case COMN_OPCODE_READ_OBJECT_LIST: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2960 Handled SLI_CONFIG " + "subsys_comn, opcode:x%x\n", + opcode); + rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job, + nemb_hbd, dmabuf); + break; + case COMN_OPCODE_WRITE_OBJECT: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2961 Handled SLI_CONFIG " + "subsys_comn, opcode:x%x\n", + opcode); + rc = lpfc_bsg_sli_cfg_write_cmd_ext(phba, job, + nemb_hbd, dmabuf); + break; + default: + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2962 Not handled SLI_CONFIG " + "subsys_comn, opcode:x%x\n", + opcode); + rc = SLI_CONFIG_NOT_HANDLED; + break; + } + } else { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2978 Handled SLI_CONFIG " + "subsys:x%d, opcode:x%x\n", + subsys, opcode); + rc = SLI_CONFIG_NOT_HANDLED; + } + } + return rc; +} + +/** + * lpfc_bsg_mbox_ext_abort_req - request to abort mbox command with ext buffers + * @phba: Pointer to HBA context object. + * + * This routine is for requesting to abort a pass-through mailbox command with + * multiple external buffers due to error condition. + **/ +static void +lpfc_bsg_mbox_ext_abort(struct lpfc_hba *phba) +{ + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_PORT) + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_ABTS; + else + lpfc_bsg_mbox_ext_session_reset(phba); + return; +} + +/** + * lpfc_bsg_read_ebuf_get - get the next mailbox read external buffer + * @phba: Pointer to HBA context object. + * @dmabuf: Pointer to a DMA buffer descriptor. + * + * This routine extracts the next mailbox read external buffer back to + * user space through BSG. + **/ +static int +lpfc_bsg_read_ebuf_get(struct lpfc_hba *phba, struct fc_bsg_job *job) +{ + struct lpfc_sli_config_mbox *sli_cfg_mbx; + struct lpfc_dmabuf *dmabuf; + uint8_t *pbuf; + uint32_t size; + uint32_t index; + + index = phba->mbox_ext_buf_ctx.seqNum; + phba->mbox_ext_buf_ctx.seqNum++; + + sli_cfg_mbx = (struct lpfc_sli_config_mbox *) + phba->mbox_ext_buf_ctx.mbx_dmabuf->virt; + + if (phba->mbox_ext_buf_ctx.nembType == nemb_mse) { + size = bsg_bf_get(lpfc_mbox_sli_config_mse_len, + &sli_cfg_mbx->un.sli_config_emb0_subsys.mse[index]); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2963 SLI_CONFIG (mse) ext-buffer rd get " + "buffer[%d], size:%d\n", index, size); + } else { + size = bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, + &sli_cfg_mbx->un.sli_config_emb1_subsys.hbd[index]); + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2964 SLI_CONFIG (hbd) ext-buffer rd get " + "buffer[%d], size:%d\n", index, size); + } + if (list_empty(&phba->mbox_ext_buf_ctx.ext_dmabuf_list)) + return -EPIPE; + dmabuf = list_first_entry(&phba->mbox_ext_buf_ctx.ext_dmabuf_list, + struct lpfc_dmabuf, list); + list_del_init(&dmabuf->list); + pbuf = (uint8_t *)dmabuf->virt; + job->reply->reply_payload_rcv_len = + sg_copy_from_buffer(job->reply_payload.sg_list, + job->reply_payload.sg_cnt, + pbuf, size); + + lpfc_bsg_dma_page_free(phba, dmabuf); + + if (phba->mbox_ext_buf_ctx.seqNum == phba->mbox_ext_buf_ctx.numBuf) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2965 SLI_CONFIG (hbd) ext-buffer rd mbox " + "command session done\n"); + lpfc_bsg_mbox_ext_session_reset(phba); + } + + job->reply->result = 0; + job->job_done(job); + + return SLI_CONFIG_HANDLED; +} + +/** + * lpfc_bsg_write_ebuf_set - set the next mailbox write external buffer + * @phba: Pointer to HBA context object. + * @dmabuf: Pointer to a DMA buffer descriptor. + * + * This routine sets up the next mailbox read external buffer obtained + * from user space through BSG. + **/ +static int +lpfc_bsg_write_ebuf_set(struct lpfc_hba *phba, struct fc_bsg_job *job, + struct lpfc_dmabuf *dmabuf) +{ + struct lpfc_sli_config_mbox *sli_cfg_mbx; + struct bsg_job_data *dd_data = NULL; + LPFC_MBOXQ_t *pmboxq = NULL; + MAILBOX_t *pmb; + enum nemb_type nemb_tp; + uint8_t *pbuf; + uint32_t size; + uint32_t index; + int rc; + + index = phba->mbox_ext_buf_ctx.seqNum; + phba->mbox_ext_buf_ctx.seqNum++; + nemb_tp = phba->mbox_ext_buf_ctx.nembType; + + sli_cfg_mbx = (struct lpfc_sli_config_mbox *) + phba->mbox_ext_buf_ctx.mbx_dmabuf->virt; + + dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); + if (!dd_data) { + rc = -ENOMEM; + goto job_error; + } + + pbuf = (uint8_t *)dmabuf->virt; + size = job->request_payload.payload_len; + sg_copy_to_buffer(job->request_payload.sg_list, + job->request_payload.sg_cnt, + pbuf, size); + + if (phba->mbox_ext_buf_ctx.nembType == nemb_mse) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2966 SLI_CONFIG (mse) ext-buffer wr set " + "buffer[%d], size:%d\n", + phba->mbox_ext_buf_ctx.seqNum, size); + + } else { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2967 SLI_CONFIG (hbd) ext-buffer wr set " + "buffer[%d], size:%d\n", + phba->mbox_ext_buf_ctx.seqNum, size); + + } + + /* set up external buffer descriptor and add to external buffer list */ + lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, index, + phba->mbox_ext_buf_ctx.mbx_dmabuf, + dmabuf); + list_add_tail(&dmabuf->list, &phba->mbox_ext_buf_ctx.ext_dmabuf_list); + + if (phba->mbox_ext_buf_ctx.seqNum == phba->mbox_ext_buf_ctx.numBuf) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2968 SLI_CONFIG ext-buffer wr all %d " + "ebuffers received\n", + phba->mbox_ext_buf_ctx.numBuf); + /* mailbox command structure for base driver */ + pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); + if (!pmboxq) { + rc = -ENOMEM; + goto job_error; + } + memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); + pbuf = (uint8_t *)phba->mbox_ext_buf_ctx.mbx_dmabuf->virt; + pmb = &pmboxq->u.mb; + memcpy(pmb, pbuf, sizeof(*pmb)); + pmb->mbxOwner = OWN_HOST; + pmboxq->vport = phba->pport; + + /* callback for multi-buffer write mailbox command */ + pmboxq->mbox_cmpl = lpfc_bsg_issue_write_mbox_ext_cmpl; + + /* context fields to callback function */ + pmboxq->context1 = dd_data; + dd_data->type = TYPE_MBOX; + dd_data->context_un.mbox.pmboxq = pmboxq; + dd_data->context_un.mbox.mb = (MAILBOX_t *)pbuf; + dd_data->context_un.mbox.set_job = job; + job->dd_data = dd_data; + + /* state change */ + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT; + + rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); + if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2969 Issued SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + return 1; + } + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2970 Failed to issue SLI_CONFIG ext-buffer " + "maibox command, rc:x%x\n", rc); + rc = -EPIPE; + goto job_error; + } + + /* wait for additoinal external buffers */ + job->reply->result = 0; + job->job_done(job); + return SLI_CONFIG_HANDLED; + +job_error: + lpfc_bsg_dma_page_free(phba, dmabuf); + kfree(dd_data); + + return rc; +} + +/** + * lpfc_bsg_handle_sli_cfg_ebuf - handle ext buffer with sli-cfg mailbox cmd + * @phba: Pointer to HBA context object. + * @mb: Pointer to a BSG mailbox object. + * @dmabuff: Pointer to a DMA buffer descriptor. + * + * This routine handles the external buffer with SLI_CONFIG (0x9B) mailbox + * command with multiple non-embedded external buffers. + **/ +static int +lpfc_bsg_handle_sli_cfg_ebuf(struct lpfc_hba *phba, struct fc_bsg_job *job, + struct lpfc_dmabuf *dmabuf) +{ + int rc; + + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2971 SLI_CONFIG buffer (type:x%x)\n", + phba->mbox_ext_buf_ctx.mboxType); + + if (phba->mbox_ext_buf_ctx.mboxType == mbox_rd) { + if (phba->mbox_ext_buf_ctx.state != LPFC_BSG_MBOX_DONE) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2972 SLI_CONFIG rd buffer state " + "mismatch:x%x\n", + phba->mbox_ext_buf_ctx.state); + lpfc_bsg_mbox_ext_abort(phba); + return -EPIPE; + } + rc = lpfc_bsg_read_ebuf_get(phba, job); + if (rc == SLI_CONFIG_HANDLED) + lpfc_bsg_dma_page_free(phba, dmabuf); + } else { /* phba->mbox_ext_buf_ctx.mboxType == mbox_wr */ + if (phba->mbox_ext_buf_ctx.state != LPFC_BSG_MBOX_HOST) { + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2973 SLI_CONFIG wr buffer state " + "mismatch:x%x\n", + phba->mbox_ext_buf_ctx.state); + lpfc_bsg_mbox_ext_abort(phba); + return -EPIPE; + } + rc = lpfc_bsg_write_ebuf_set(phba, job, dmabuf); } - kfree(dd_data); - return; + return rc; } /** - * lpfc_bsg_check_cmd_access - test for a supported mailbox command + * lpfc_bsg_handle_sli_cfg_ext - handle sli-cfg mailbox with external buffer * @phba: Pointer to HBA context object. - * @mb: Pointer to a mailbox object. - * @vport: Pointer to a vport object. + * @mb: Pointer to a BSG mailbox object. + * @dmabuff: Pointer to a DMA buffer descriptor. * - * Some commands require the port to be offline, some may not be called from - * the application. + * This routine checkes and handles non-embedded multi-buffer SLI_CONFIG + * (0x9B) mailbox commands and external buffers. **/ -static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba, - MAILBOX_t *mb, struct lpfc_vport *vport) +static int +lpfc_bsg_handle_sli_cfg_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, + struct lpfc_dmabuf *dmabuf) { - /* return negative error values for bsg job */ - switch (mb->mbxCommand) { - /* Offline only */ - case MBX_INIT_LINK: - case MBX_DOWN_LINK: - case MBX_CONFIG_LINK: - case MBX_CONFIG_RING: - case MBX_RESET_RING: - case MBX_UNREG_LOGIN: - case MBX_CLEAR_LA: - case MBX_DUMP_CONTEXT: - case MBX_RUN_DIAGS: - case MBX_RESTART: - case MBX_SET_MASK: - if (!(vport->fc_flag & FC_OFFLINE_MODE)) { - lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, - "2743 Command 0x%x is illegal in on-line " - "state\n", - mb->mbxCommand); - return -EPERM; - } - case MBX_WRITE_NV: - case MBX_WRITE_VPARMS: - case MBX_LOAD_SM: - case MBX_READ_NV: - case MBX_READ_CONFIG: - case MBX_READ_RCONFIG: - case MBX_READ_STATUS: - case MBX_READ_XRI: - case MBX_READ_REV: - case MBX_READ_LNK_STAT: - case MBX_DUMP_MEMORY: - case MBX_DOWN_LOAD: - case MBX_UPDATE_CFG: - case MBX_KILL_BOARD: - case MBX_LOAD_AREA: - case MBX_LOAD_EXP_ROM: - case MBX_BEACON: - case MBX_DEL_LD_ENTRY: - case MBX_SET_DEBUG: - case MBX_WRITE_WWN: - case MBX_SLI4_CONFIG: - case MBX_READ_EVENT_LOG: - case MBX_READ_EVENT_LOG_STATUS: - case MBX_WRITE_EVENT_LOG: - case MBX_PORT_CAPABILITIES: - case MBX_PORT_IOV_CONTROL: - case MBX_RUN_BIU_DIAG64: - break; - case MBX_SET_VARIABLE: - lpfc_printf_log(phba, KERN_INFO, LOG_INIT, - "1226 mbox: set_variable 0x%x, 0x%x\n", - mb->un.varWords[0], - mb->un.varWords[1]); - if ((mb->un.varWords[0] == SETVAR_MLOMNT) - && (mb->un.varWords[1] == 1)) { - phba->wait_4_mlo_maint_flg = 1; - } else if (mb->un.varWords[0] == SETVAR_MLORST) { - phba->link_flag &= ~LS_LOOPBACK_MODE; - phba->fc_topology = LPFC_TOPOLOGY_PT_PT; - } - break; - case MBX_READ_SPARM64: - case MBX_READ_TOPOLOGY: - case MBX_REG_LOGIN: - case MBX_REG_LOGIN64: - case MBX_CONFIG_PORT: - case MBX_RUN_BIU_DIAG: - default: - lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, - "2742 Unknown Command 0x%x\n", - mb->mbxCommand); - return -EPERM; + struct dfc_mbox_req *mbox_req; + int rc; + + mbox_req = + (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; + + /* mbox command with/without single external buffer */ + if (mbox_req->extMboxTag == 0 && mbox_req->extSeqNum == 0) + return SLI_CONFIG_NOT_HANDLED; + + /* mbox command and first external buffer */ + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE) { + if (mbox_req->extSeqNum == 1) { + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2974 SLI_CONFIG mailbox: tag:%d, " + "seq:%d\n", mbox_req->extMboxTag, + mbox_req->extSeqNum); + rc = lpfc_bsg_handle_sli_cfg_mbox(phba, job, dmabuf); + return rc; + } else + goto sli_cfg_ext_error; } - return 0; /* ok */ + /* + * handle additional external buffers + */ + + /* check broken pipe conditions */ + if (mbox_req->extMboxTag != phba->mbox_ext_buf_ctx.mbxTag) + goto sli_cfg_ext_error; + if (mbox_req->extSeqNum > phba->mbox_ext_buf_ctx.numBuf) + goto sli_cfg_ext_error; + if (mbox_req->extSeqNum != phba->mbox_ext_buf_ctx.seqNum + 1) + goto sli_cfg_ext_error; + + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2975 SLI_CONFIG mailbox external buffer: " + "extSta:x%x, tag:%d, seq:%d\n", + phba->mbox_ext_buf_ctx.state, mbox_req->extMboxTag, + mbox_req->extSeqNum); + rc = lpfc_bsg_handle_sli_cfg_ebuf(phba, job, dmabuf); + return rc; + +sli_cfg_ext_error: + /* all other cases, broken pipe */ + lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, + "2976 SLI_CONFIG mailbox broken pipe: " + "ctxSta:x%x, ctxNumBuf:%d " + "ctxTag:%d, ctxSeq:%d, tag:%d, seq:%d\n", + phba->mbox_ext_buf_ctx.state, + phba->mbox_ext_buf_ctx.numBuf, + phba->mbox_ext_buf_ctx.mbxTag, + phba->mbox_ext_buf_ctx.seqNum, + mbox_req->extMboxTag, mbox_req->extSeqNum); + + lpfc_bsg_mbox_ext_session_reset(phba); + + return -EPIPE; } /** @@ -2644,22 +4118,21 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, LPFC_MBOXQ_t *pmboxq = NULL; /* internal mailbox queue */ MAILBOX_t *pmb; /* shortcut to the pmboxq mailbox */ /* a 4k buffer to hold the mb and extended data from/to the bsg */ - MAILBOX_t *mb = NULL; + uint8_t *pmbx = NULL; struct bsg_job_data *dd_data = NULL; /* bsg data tracking structure */ - uint32_t size; - struct lpfc_dmabuf *rxbmp = NULL; /* for biu diag */ - struct lpfc_dmabufext *dmp = NULL; /* for biu diag */ - struct ulp_bde64 *rxbpl = NULL; - struct dfc_mbox_req *mbox_req = (struct dfc_mbox_req *) - job->request->rqst_data.h_vendor.vendor_cmd; + struct lpfc_dmabuf *dmabuf = NULL; + struct dfc_mbox_req *mbox_req; struct READ_EVENT_LOG_VAR *rdEventLog; uint32_t transmit_length, receive_length, mode; + struct lpfc_mbx_sli4_config *sli4_config; struct lpfc_mbx_nembed_cmd *nembed_sge; struct mbox_header *header; struct ulp_bde64 *bde; uint8_t *ext = NULL; int rc = 0; uint8_t *from; + uint32_t size; + /* in case no data is transferred */ job->reply->reply_payload_rcv_len = 0; @@ -2671,6 +4144,18 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, goto job_done; } + /* + * Don't allow mailbox commands to be sent when blocked or when in + * the middle of discovery + */ + if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { + rc = -EAGAIN; + goto job_done; + } + + mbox_req = + (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; + /* check if requested extended data lengths are valid */ if ((mbox_req->inExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t)) || (mbox_req->outExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t))) { @@ -2678,6 +4163,32 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, goto job_done; } + dmabuf = lpfc_bsg_dma_page_alloc(phba); + if (!dmabuf || !dmabuf->virt) { + rc = -ENOMEM; + goto job_done; + } + + /* Get the mailbox command or external buffer from BSG */ + pmbx = (uint8_t *)dmabuf->virt; + size = job->request_payload.payload_len; + sg_copy_to_buffer(job->request_payload.sg_list, + job->request_payload.sg_cnt, pmbx, size); + + /* Handle possible SLI_CONFIG with non-embedded payloads */ + if (phba->sli_rev == LPFC_SLI_REV4) { + rc = lpfc_bsg_handle_sli_cfg_ext(phba, job, dmabuf); + if (rc == SLI_CONFIG_HANDLED) + goto job_cont; + if (rc) + goto job_done; + /* SLI_CONFIG_NOT_HANDLED for other mailbox commands */ + } + + rc = lpfc_bsg_check_cmd_access(phba, (MAILBOX_t *)pmbx, vport); + if (rc != 0) + goto job_done; /* must be negative */ + /* allocate our bsg tracking structure */ dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); if (!dd_data) { @@ -2687,12 +4198,6 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, goto job_done; } - mb = kzalloc(BSG_MBOX_SIZE, GFP_KERNEL); - if (!mb) { - rc = -ENOMEM; - goto job_done; - } - pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); if (!pmboxq) { rc = -ENOMEM; @@ -2700,17 +4205,8 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, } memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); - size = job->request_payload.payload_len; - sg_copy_to_buffer(job->request_payload.sg_list, - job->request_payload.sg_cnt, - mb, size); - - rc = lpfc_bsg_check_cmd_access(phba, mb, vport); - if (rc != 0) - goto job_done; /* must be negative */ - pmb = &pmboxq->u.mb; - memcpy(pmb, mb, sizeof(*pmb)); + memcpy(pmb, pmbx, sizeof(*pmb)); pmb->mbxOwner = OWN_HOST; pmboxq->vport = vport; @@ -2727,30 +4223,13 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, "0x%x while in stopped state.\n", pmb->mbxCommand); - /* Don't allow mailbox commands to be sent when blocked - * or when in the middle of discovery - */ - if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { - rc = -EAGAIN; - goto job_done; - } - /* extended mailbox commands will need an extended buffer */ if (mbox_req->inExtWLen || mbox_req->outExtWLen) { - ext = kzalloc(MAILBOX_EXT_SIZE, GFP_KERNEL); - if (!ext) { - rc = -ENOMEM; - goto job_done; - } - /* any data for the device? */ if (mbox_req->inExtWLen) { - from = (uint8_t *)mb; - from += sizeof(MAILBOX_t); - memcpy((uint8_t *)ext, from, - mbox_req->inExtWLen * sizeof(uint32_t)); + from = pmbx; + ext = from + sizeof(MAILBOX_t); } - pmboxq->context2 = ext; pmboxq->in_ext_byte_len = mbox_req->inExtWLen * sizeof(uint32_t); @@ -2774,46 +4253,17 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, rc = -ERANGE; goto job_done; } - - rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!rxbmp) { - rc = -ENOMEM; - goto job_done; - } - - rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - if (!rxbmp->virt) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&rxbmp->list); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - dmp = diag_cmd_data_alloc(phba, rxbpl, transmit_length, 0); - if (!dmp) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&dmp->dma.list); pmb->un.varBIUdiag.un.s2.xmit_bde64.addrHigh = - putPaddrHigh(dmp->dma.phys); + putPaddrHigh(dmabuf->phys + sizeof(MAILBOX_t)); pmb->un.varBIUdiag.un.s2.xmit_bde64.addrLow = - putPaddrLow(dmp->dma.phys); + putPaddrLow(dmabuf->phys + sizeof(MAILBOX_t)); pmb->un.varBIUdiag.un.s2.rcv_bde64.addrHigh = - putPaddrHigh(dmp->dma.phys + - pmb->un.varBIUdiag.un.s2. - xmit_bde64.tus.f.bdeSize); + putPaddrHigh(dmabuf->phys + sizeof(MAILBOX_t) + + pmb->un.varBIUdiag.un.s2.xmit_bde64.tus.f.bdeSize); pmb->un.varBIUdiag.un.s2.rcv_bde64.addrLow = - putPaddrLow(dmp->dma.phys + - pmb->un.varBIUdiag.un.s2. - xmit_bde64.tus.f.bdeSize); - - /* copy the transmit data found in the mailbox extension area */ - from = (uint8_t *)mb; - from += sizeof(MAILBOX_t); - memcpy((uint8_t *)dmp->dma.virt, from, transmit_length); + putPaddrLow(dmabuf->phys + sizeof(MAILBOX_t) + + pmb->un.varBIUdiag.un.s2.xmit_bde64.tus.f.bdeSize); } else if (pmb->mbxCommand == MBX_READ_EVENT_LOG) { rdEventLog = &pmb->un.varRdEventLog; receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize; @@ -2829,33 +4279,10 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, /* mode zero uses a bde like biu diags command */ if (mode == 0) { - - /* rebuild the command for sli4 using our own buffers - * like we do for biu diags - */ - - rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!rxbmp) { - rc = -ENOMEM; - goto job_done; - } - - rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - if (rxbpl) { - INIT_LIST_HEAD(&rxbmp->list); - dmp = diag_cmd_data_alloc(phba, rxbpl, - receive_length, 0); - } - - if (!dmp) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&dmp->dma.list); - pmb->un.varWords[3] = putPaddrLow(dmp->dma.phys); - pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys); + pmb->un.varWords[3] = putPaddrLow(dmabuf->phys + + sizeof(MAILBOX_t)); + pmb->un.varWords[4] = putPaddrHigh(dmabuf->phys + + sizeof(MAILBOX_t)); } } else if (phba->sli_rev == LPFC_SLI_REV4) { if (pmb->mbxCommand == MBX_DUMP_MEMORY) { @@ -2866,36 +4293,14 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, /* receive length cannot be greater than mailbox * extension size */ - if ((receive_length == 0) || - (receive_length > MAILBOX_EXT_SIZE)) { + if (receive_length == 0) { rc = -ERANGE; goto job_done; } - - rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!rxbmp) { - rc = -ENOMEM; - goto job_done; - } - - rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - if (!rxbmp->virt) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&rxbmp->list); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - dmp = diag_cmd_data_alloc(phba, rxbpl, receive_length, - 0); - if (!dmp) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&dmp->dma.list); - pmb->un.varWords[3] = putPaddrLow(dmp->dma.phys); - pmb->un.varWords[4] = putPaddrHigh(dmp->dma.phys); + pmb->un.varWords[3] = putPaddrLow(dmabuf->phys + + sizeof(MAILBOX_t)); + pmb->un.varWords[4] = putPaddrHigh(dmabuf->phys + + sizeof(MAILBOX_t)); } else if ((pmb->mbxCommand == MBX_UPDATE_CFG) && pmb->un.varUpdateCfg.co) { bde = (struct ulp_bde64 *)&pmb->un.varWords[4]; @@ -2905,102 +4310,53 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, rc = -ERANGE; goto job_done; } - - rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!rxbmp) { - rc = -ENOMEM; - goto job_done; - } - - rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - if (!rxbmp->virt) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&rxbmp->list); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - dmp = diag_cmd_data_alloc(phba, rxbpl, - bde->tus.f.bdeSize, 0); - if (!dmp) { - rc = -ENOMEM; - goto job_done; - } - - INIT_LIST_HEAD(&dmp->dma.list); - bde->addrHigh = putPaddrHigh(dmp->dma.phys); - bde->addrLow = putPaddrLow(dmp->dma.phys); - - /* copy the transmit data found in the mailbox - * extension area - */ - from = (uint8_t *)mb; - from += sizeof(MAILBOX_t); - memcpy((uint8_t *)dmp->dma.virt, from, - bde->tus.f.bdeSize); + bde->addrHigh = putPaddrHigh(dmabuf->phys + + sizeof(MAILBOX_t)); + bde->addrLow = putPaddrLow(dmabuf->phys + + sizeof(MAILBOX_t)); } else if (pmb->mbxCommand == MBX_SLI4_CONFIG) { - /* rebuild the command for sli4 using our own buffers - * like we do for biu diags - */ - header = (struct mbox_header *)&pmb->un.varWords[0]; - nembed_sge = (struct lpfc_mbx_nembed_cmd *) - &pmb->un.varWords[0]; - receive_length = nembed_sge->sge[0].length; - - /* receive length cannot be greater than mailbox - * extension size - */ - if ((receive_length == 0) || - (receive_length > MAILBOX_EXT_SIZE)) { - rc = -ERANGE; - goto job_done; - } - - rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); - if (!rxbmp) { - rc = -ENOMEM; - goto job_done; - } - - rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); - if (!rxbmp->virt) { - rc = -ENOMEM; - goto job_done; - } + /* Handling non-embedded SLI_CONFIG mailbox command */ + sli4_config = &pmboxq->u.mqe.un.sli4_config; + if (!bf_get(lpfc_mbox_hdr_emb, + &sli4_config->header.cfg_mhdr)) { + /* rebuild the command for sli4 using our + * own buffers like we do for biu diags + */ + header = (struct mbox_header *) + &pmb->un.varWords[0]; + nembed_sge = (struct lpfc_mbx_nembed_cmd *) + &pmb->un.varWords[0]; + receive_length = nembed_sge->sge[0].length; + + /* receive length cannot be greater than + * mailbox extension size + */ + if ((receive_length == 0) || + (receive_length > MAILBOX_EXT_SIZE)) { + rc = -ERANGE; + goto job_done; + } - INIT_LIST_HEAD(&rxbmp->list); - rxbpl = (struct ulp_bde64 *) rxbmp->virt; - dmp = diag_cmd_data_alloc(phba, rxbpl, receive_length, - 0); - if (!dmp) { - rc = -ENOMEM; - goto job_done; + nembed_sge->sge[0].pa_hi = + putPaddrHigh(dmabuf->phys + + sizeof(MAILBOX_t)); + nembed_sge->sge[0].pa_lo = + putPaddrLow(dmabuf->phys + + sizeof(MAILBOX_t)); } - - INIT_LIST_HEAD(&dmp->dma.list); - nembed_sge->sge[0].pa_hi = putPaddrHigh(dmp->dma.phys); - nembed_sge->sge[0].pa_lo = putPaddrLow(dmp->dma.phys); - /* copy the transmit data found in the mailbox - * extension area - */ - from = (uint8_t *)mb; - from += sizeof(MAILBOX_t); - memcpy((uint8_t *)dmp->dma.virt, from, - header->cfg_mhdr.payload_length); } } - dd_data->context_un.mbox.rxbmp = rxbmp; - dd_data->context_un.mbox.dmp = dmp; + dd_data->context_un.mbox.dmabuffers = dmabuf; /* setup wake call as IOCB callback */ - pmboxq->mbox_cmpl = lpfc_bsg_wake_mbox_wait; + pmboxq->mbox_cmpl = lpfc_bsg_issue_mbox_cmpl; /* setup context field to pass wait_queue pointer to wake function */ pmboxq->context1 = dd_data; dd_data->type = TYPE_MBOX; dd_data->context_un.mbox.pmboxq = pmboxq; - dd_data->context_un.mbox.mb = mb; + dd_data->context_un.mbox.mb = (MAILBOX_t *)pmbx; dd_data->context_un.mbox.set_job = job; dd_data->context_un.mbox.ext = ext; dd_data->context_un.mbox.mbOffset = mbox_req->mbOffset; @@ -3017,11 +4373,11 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, } /* job finished, copy the data */ - memcpy(mb, pmb, sizeof(*pmb)); + memcpy(pmbx, pmb, sizeof(*pmb)); job->reply->reply_payload_rcv_len = sg_copy_from_buffer(job->reply_payload.sg_list, - job->reply_payload.sg_cnt, - mb, size); + job->reply_payload.sg_cnt, + pmbx, size); /* not waiting mbox already done */ rc = 0; goto job_done; @@ -3033,22 +4389,12 @@ lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, job_done: /* common exit for error or job completed inline */ - kfree(mb); if (pmboxq) mempool_free(pmboxq, phba->mbox_mem_pool); - kfree(ext); - if (dmp) { - dma_free_coherent(&phba->pcidev->dev, - dmp->size, dmp->dma.virt, - dmp->dma.phys); - kfree(dmp); - } - if (rxbmp) { - lpfc_mbuf_free(phba, rxbmp->virt, rxbmp->phys); - kfree(rxbmp); - } + lpfc_bsg_dma_page_free(phba, dmabuf); kfree(dd_data); +job_cont: return rc; } @@ -3061,37 +4407,28 @@ lpfc_bsg_mbox_cmd(struct fc_bsg_job *job) { struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; struct lpfc_hba *phba = vport->phba; + struct dfc_mbox_req *mbox_req; int rc = 0; - /* in case no data is transferred */ + /* mix-and-match backward compatibility */ job->reply->reply_payload_rcv_len = 0; if (job->request_len < sizeof(struct fc_bsg_request) + sizeof(struct dfc_mbox_req)) { - lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, - "2737 Received MBOX_REQ request below " - "minimum size\n"); - rc = -EINVAL; - goto job_error; - } - - if (job->request_payload.payload_len != BSG_MBOX_SIZE) { - rc = -EINVAL; - goto job_error; - } - - if (job->reply_payload.payload_len != BSG_MBOX_SIZE) { - rc = -EINVAL; - goto job_error; - } - - if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { - rc = -EAGAIN; - goto job_error; + lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, + "2737 Mix-and-match backward compability " + "between MBOX_REQ old size:%d and " + "new request size:%d\n", + (int)(job->request_len - + sizeof(struct fc_bsg_request)), + (int)sizeof(struct dfc_mbox_req)); + mbox_req = (struct dfc_mbox_req *) + job->request->rqst_data.h_vendor.vendor_cmd; + mbox_req->extMboxTag = 0; + mbox_req->extSeqNum = 0; } rc = lpfc_bsg_issue_mbox(phba, job, vport); -job_error: if (rc == 0) { /* job done */ job->reply->result = 0; @@ -3422,10 +4759,16 @@ lpfc_bsg_hst_vendor(struct fc_bsg_job *job) rc = lpfc_bsg_send_mgmt_rsp(job); break; case LPFC_BSG_VENDOR_DIAG_MODE: - rc = lpfc_bsg_diag_mode(job); + rc = lpfc_bsg_diag_loopback_mode(job); + break; + case LPFC_BSG_VENDOR_DIAG_MODE_END: + rc = lpfc_sli4_bsg_diag_mode_end(job); + break; + case LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK: + rc = lpfc_bsg_diag_loopback_run(job); break; - case LPFC_BSG_VENDOR_DIAG_TEST: - rc = lpfc_bsg_diag_test(job); + case LPFC_BSG_VENDOR_LINK_DIAG_TEST: + rc = lpfc_sli4_bsg_link_diag_test(job); break; case LPFC_BSG_VENDOR_GET_MGMT_REV: rc = lpfc_bsg_get_dfc_rev(job); @@ -3544,6 +4887,8 @@ lpfc_bsg_timeout(struct fc_bsg_job *job) /* the mbox completion handler can now be run */ spin_unlock_irqrestore(&phba->ct_ev_lock, flags); job->job_done(job); + if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_PORT) + phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_ABTS; break; case TYPE_MENLO: menlo = &dd_data->context_un.menlo; diff --git a/drivers/scsi/lpfc/lpfc_bsg.h b/drivers/scsi/lpfc/lpfc_bsg.h index b542aca6f5ae..c8c2b47ea886 100644 --- a/drivers/scsi/lpfc/lpfc_bsg.h +++ b/drivers/scsi/lpfc/lpfc_bsg.h @@ -24,15 +24,17 @@ * These are the vendor unique structures passed in using the bsg * FC_BSG_HST_VENDOR message code type. */ -#define LPFC_BSG_VENDOR_SET_CT_EVENT 1 -#define LPFC_BSG_VENDOR_GET_CT_EVENT 2 -#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3 -#define LPFC_BSG_VENDOR_DIAG_MODE 4 -#define LPFC_BSG_VENDOR_DIAG_TEST 5 -#define LPFC_BSG_VENDOR_GET_MGMT_REV 6 -#define LPFC_BSG_VENDOR_MBOX 7 -#define LPFC_BSG_VENDOR_MENLO_CMD 8 -#define LPFC_BSG_VENDOR_MENLO_DATA 9 +#define LPFC_BSG_VENDOR_SET_CT_EVENT 1 +#define LPFC_BSG_VENDOR_GET_CT_EVENT 2 +#define LPFC_BSG_VENDOR_SEND_MGMT_RESP 3 +#define LPFC_BSG_VENDOR_DIAG_MODE 4 +#define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK 5 +#define LPFC_BSG_VENDOR_GET_MGMT_REV 6 +#define LPFC_BSG_VENDOR_MBOX 7 +#define LPFC_BSG_VENDOR_MENLO_CMD 8 +#define LPFC_BSG_VENDOR_MENLO_DATA 9 +#define LPFC_BSG_VENDOR_DIAG_MODE_END 10 +#define LPFC_BSG_VENDOR_LINK_DIAG_TEST 11 struct set_ct_event { uint32_t command; @@ -67,10 +69,25 @@ struct diag_mode_set { uint32_t timeout; }; +struct sli4_link_diag { + uint32_t command; + uint32_t timeout; + uint32_t test_id; + uint32_t loops; + uint32_t test_version; + uint32_t error_action; +}; + struct diag_mode_test { uint32_t command; }; +struct diag_status { + uint32_t mbox_status; + uint32_t shdr_status; + uint32_t shdr_add_status; +}; + #define LPFC_WWNN_TYPE 0 #define LPFC_WWPN_TYPE 1 @@ -92,11 +109,15 @@ struct get_mgmt_rev_reply { }; #define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */ + +/* BSG mailbox request header */ struct dfc_mbox_req { uint32_t command; uint32_t mbOffset; uint32_t inExtWLen; uint32_t outExtWLen; + uint32_t extMboxTag; + uint32_t extSeqNum; }; /* Used for menlo command or menlo data. The xri is only used for menlo data */ @@ -171,7 +192,7 @@ struct lpfc_sli_config_mse { #define lpfc_mbox_sli_config_mse_len_WORD buf_len }; -struct lpfc_sli_config_subcmd_hbd { +struct lpfc_sli_config_hbd { uint32_t buf_len; #define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT 0 #define lpfc_mbox_sli_config_ecmn_hbd_len_MASK 0xffffff @@ -194,21 +215,39 @@ struct lpfc_sli_config_hdr { uint32_t reserved5; }; -struct lpfc_sli_config_generic { +struct lpfc_sli_config_emb0_subsys { struct lpfc_sli_config_hdr sli_config_hdr; #define LPFC_MBX_SLI_CONFIG_MAX_MSE 19 struct lpfc_sli_config_mse mse[LPFC_MBX_SLI_CONFIG_MAX_MSE]; + uint32_t padding; + uint32_t word64; +#define lpfc_emb0_subcmnd_opcode_SHIFT 0 +#define lpfc_emb0_subcmnd_opcode_MASK 0xff +#define lpfc_emb0_subcmnd_opcode_WORD word64 +#define lpfc_emb0_subcmnd_subsys_SHIFT 8 +#define lpfc_emb0_subcmnd_subsys_MASK 0xff +#define lpfc_emb0_subcmnd_subsys_WORD word64 +/* Subsystem FCOE (0x0C) OpCodes */ +#define SLI_CONFIG_SUBSYS_FCOE 0x0C +#define FCOE_OPCODE_READ_FCF 0x08 +#define FCOE_OPCODE_ADD_FCF 0x09 }; -struct lpfc_sli_config_subcmnd { +struct lpfc_sli_config_emb1_subsys { struct lpfc_sli_config_hdr sli_config_hdr; uint32_t word6; -#define lpfc_subcmnd_opcode_SHIFT 0 -#define lpfc_subcmnd_opcode_MASK 0xff -#define lpfc_subcmnd_opcode_WORD word6 -#define lpfc_subcmnd_subsys_SHIFT 8 -#define lpfc_subcmnd_subsys_MASK 0xff -#define lpfc_subcmnd_subsys_WORD word6 +#define lpfc_emb1_subcmnd_opcode_SHIFT 0 +#define lpfc_emb1_subcmnd_opcode_MASK 0xff +#define lpfc_emb1_subcmnd_opcode_WORD word6 +#define lpfc_emb1_subcmnd_subsys_SHIFT 8 +#define lpfc_emb1_subcmnd_subsys_MASK 0xff +#define lpfc_emb1_subcmnd_subsys_WORD word6 +/* Subsystem COMN (0x01) OpCodes */ +#define SLI_CONFIG_SUBSYS_COMN 0x01 +#define COMN_OPCODE_READ_OBJECT 0xAB +#define COMN_OPCODE_WRITE_OBJECT 0xAC +#define COMN_OPCODE_READ_OBJECT_LIST 0xAD +#define COMN_OPCODE_DELETE_OBJECT 0xAE uint32_t timeout; uint32_t request_length; uint32_t word9; @@ -222,8 +261,8 @@ struct lpfc_sli_config_subcmnd { uint32_t rd_offset; uint32_t obj_name[26]; uint32_t hbd_count; -#define LPFC_MBX_SLI_CONFIG_MAX_HBD 10 - struct lpfc_sli_config_subcmd_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD]; +#define LPFC_MBX_SLI_CONFIG_MAX_HBD 8 + struct lpfc_sli_config_hbd hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD]; }; struct lpfc_sli_config_mbox { @@ -235,7 +274,11 @@ struct lpfc_sli_config_mbox { #define lpfc_mqe_command_MASK 0x000000FF #define lpfc_mqe_command_WORD word0 union { - struct lpfc_sli_config_generic sli_config_generic; - struct lpfc_sli_config_subcmnd sli_config_subcmnd; + struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys; + struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys; } un; }; + +/* driver only */ +#define SLI_CONFIG_NOT_HANDLED 0 +#define SLI_CONFIG_HANDLED 1 diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h index f14db2d17f29..11e26a26b5d1 100644 --- a/drivers/scsi/lpfc/lpfc_hw4.h +++ b/drivers/scsi/lpfc/lpfc_hw4.h @@ -867,6 +867,8 @@ struct mbox_header { #define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF 0x0A #define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE 0x0B #define LPFC_MBOX_OPCODE_FCOE_REDISCOVER_FCF 0x10 +#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE 0x22 +#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK 0x23 /* Mailbox command structures */ struct eq_context { @@ -1308,6 +1310,83 @@ struct lpfc_id_range { #define lpfc_mbx_rsrc_id_word4_1_WORD word5 }; +struct lpfc_mbx_set_link_diag_state { + struct mbox_header header; + union { + struct { + uint32_t word0; +#define lpfc_mbx_set_diag_state_diag_SHIFT 0 +#define lpfc_mbx_set_diag_state_diag_MASK 0x00000001 +#define lpfc_mbx_set_diag_state_diag_WORD word0 +#define lpfc_mbx_set_diag_state_link_num_SHIFT 16 +#define lpfc_mbx_set_diag_state_link_num_MASK 0x0000003F +#define lpfc_mbx_set_diag_state_link_num_WORD word0 +#define lpfc_mbx_set_diag_state_link_type_SHIFT 22 +#define lpfc_mbx_set_diag_state_link_type_MASK 0x00000003 +#define lpfc_mbx_set_diag_state_link_type_WORD word0 + } req; + struct { + uint32_t word0; + } rsp; + } u; +}; + +struct lpfc_mbx_set_link_diag_loopback { + struct mbox_header header; + union { + struct { + uint32_t word0; +#define lpfc_mbx_set_diag_lpbk_type_SHIFT 0 +#define lpfc_mbx_set_diag_lpbk_type_MASK 0x00000001 +#define lpfc_mbx_set_diag_lpbk_type_WORD word0 +#define LPFC_DIAG_LOOPBACK_TYPE_DISABLE 0x0 +#define LPFC_DIAG_LOOPBACK_TYPE_INTERNAL 0x1 +#define LPFC_DIAG_LOOPBACK_TYPE_EXTERNAL 0x2 +#define lpfc_mbx_set_diag_lpbk_link_num_SHIFT 16 +#define lpfc_mbx_set_diag_lpbk_link_num_MASK 0x0000003F +#define lpfc_mbx_set_diag_lpbk_link_num_WORD word0 +#define lpfc_mbx_set_diag_lpbk_link_type_SHIFT 22 +#define lpfc_mbx_set_diag_lpbk_link_type_MASK 0x00000003 +#define lpfc_mbx_set_diag_lpbk_link_type_WORD word0 + } req; + struct { + uint32_t word0; + } rsp; + } u; +}; + +struct lpfc_mbx_run_link_diag_test { + struct mbox_header header; + union { + struct { + uint32_t word0; +#define lpfc_mbx_run_diag_test_link_num_SHIFT 16 +#define lpfc_mbx_run_diag_test_link_num_MASK 0x0000003F +#define lpfc_mbx_run_diag_test_link_num_WORD word0 +#define lpfc_mbx_run_diag_test_link_type_SHIFT 22 +#define lpfc_mbx_run_diag_test_link_type_MASK 0x00000003 +#define lpfc_mbx_run_diag_test_link_type_WORD word0 + uint32_t word1; +#define lpfc_mbx_run_diag_test_test_id_SHIFT 0 +#define lpfc_mbx_run_diag_test_test_id_MASK 0x0000FFFF +#define lpfc_mbx_run_diag_test_test_id_WORD word1 +#define lpfc_mbx_run_diag_test_loops_SHIFT 16 +#define lpfc_mbx_run_diag_test_loops_MASK 0x0000FFFF +#define lpfc_mbx_run_diag_test_loops_WORD word1 + uint32_t word2; +#define lpfc_mbx_run_diag_test_test_ver_SHIFT 0 +#define lpfc_mbx_run_diag_test_test_ver_MASK 0x0000FFFF +#define lpfc_mbx_run_diag_test_test_ver_WORD word2 +#define lpfc_mbx_run_diag_test_err_act_SHIFT 16 +#define lpfc_mbx_run_diag_test_err_act_MASK 0x000000FF +#define lpfc_mbx_run_diag_test_err_act_WORD word2 + } req; + struct { + uint32_t word0; + } rsp; + } u; +}; + /* * struct lpfc_mbx_alloc_rsrc_extents: * A mbox is generically 256 bytes long. An SLI4_CONFIG mailbox requires @@ -2553,6 +2632,9 @@ struct lpfc_mqe { struct lpfc_mbx_supp_pages supp_pages; struct lpfc_mbx_pc_sli4_params sli4_params; struct lpfc_mbx_get_sli4_parameters get_sli4_parameters; + struct lpfc_mbx_set_link_diag_state link_diag_state; + struct lpfc_mbx_set_link_diag_loopback link_diag_loopback; + struct lpfc_mbx_run_link_diag_test link_diag_test; struct lpfc_mbx_get_func_cfg get_func_cfg; struct lpfc_mbx_get_prof_cfg get_prof_cfg; struct lpfc_mbx_nop nop; diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 09632ea689e9..148b98ddbb1d 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -4246,6 +4246,14 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba) phba->fcf.redisc_wait.function = lpfc_sli4_fcf_redisc_wait_tmo; phba->fcf.redisc_wait.data = (unsigned long)phba; + /* + * Control structure for handling external multi-buffer mailbox + * command pass-through. + */ + memset((uint8_t *)&phba->mbox_ext_buf_ctx, 0, + sizeof(struct lpfc_mbox_ext_buf_ctx)); + INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list); + /* * We need to do a READ_CONFIG mailbox command here before * calling lpfc_get_cfgparam. For VFs this will report the -- cgit v1.2.3 From f87d39d951329cd8f462bf9007d334122c0599d0 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 27 May 2011 03:50:55 +0000 Subject: [CIFS] Migrate from prefixpath logic Now we point superblock to a server share root and set a root dentry appropriately. This let us share superblock between mounts like //server/sharename/foo/bar and //server/sharename/foo further. Reviewed-by: Jeff Layton Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/cifs_fs_sb.h | 2 - fs/cifs/cifsfs.c | 101 ++++++++++++++++++++++++++++++++++++++-- fs/cifs/cifsglob.h | 75 ++++++++++++++++++++++++++++++ fs/cifs/cifsproto.h | 5 +- fs/cifs/connect.c | 128 ++------------------------------------------------- fs/cifs/dir.c | 7 +-- fs/cifs/inode.c | 19 +++----- 7 files changed, 189 insertions(+), 148 deletions(-) diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h index a9d5692e0c20..c96b44b4e262 100644 --- a/fs/cifs/cifs_fs_sb.h +++ b/fs/cifs/cifs_fs_sb.h @@ -56,8 +56,6 @@ struct cifs_sb_info { mode_t mnt_file_mode; mode_t mnt_dir_mode; unsigned int mnt_cifs_flags; - int prepathlen; - char *prepath; /* relative path under the share to mount to */ char *mountdata; /* options received at mount time or via DFS refs */ struct backing_dev_info bdi; struct delayed_work prune_tlinks; diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 1d2a93c60e75..46fdd55cf427 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -415,8 +415,6 @@ cifs_show_options(struct seq_file *s, struct vfsmount *m) seq_printf(s, ",nocase"); if (tcon->retry) seq_printf(s, ",hard"); - if (cifs_sb->prepath) - seq_printf(s, ",prepath=%s", cifs_sb->prepath); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) seq_printf(s, ",posixpaths"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) @@ -530,6 +528,100 @@ static const struct super_operations cifs_super_ops = { #endif }; +/* + * Get root dentry from superblock according to prefix path mount option. + * Return dentry with refcount + 1 on success and NULL otherwise. + */ +static struct dentry * +cifs_get_root(struct smb_vol *vol, struct super_block *sb) +{ + int xid, rc; + struct inode *inode; + struct qstr name; + struct dentry *dparent = NULL, *dchild = NULL, *alias; + struct cifs_sb_info *cifs_sb = CIFS_SB(sb); + unsigned int i, full_len, len; + char *full_path = NULL, *pstart; + char sep; + + full_path = cifs_build_path_to_root(vol, cifs_sb, + cifs_sb_master_tcon(cifs_sb)); + if (full_path == NULL) + return NULL; + + cFYI(1, "Get root dentry for %s", full_path); + + xid = GetXid(); + sep = CIFS_DIR_SEP(cifs_sb); + dparent = dget(sb->s_root); + full_len = strlen(full_path); + full_path[full_len] = sep; + pstart = full_path + 1; + + for (i = 1, len = 0; i <= full_len; i++) { + if (full_path[i] != sep || !len) { + len++; + continue; + } + + full_path[i] = 0; + cFYI(1, "get dentry for %s", pstart); + + name.name = pstart; + name.len = len; + name.hash = full_name_hash(pstart, len); + dchild = d_lookup(dparent, &name); + if (dchild == NULL) { + cFYI(1, "not exists"); + dchild = d_alloc(dparent, &name); + if (dchild == NULL) { + dput(dparent); + dparent = NULL; + goto out; + } + } + + cFYI(1, "get inode"); + if (dchild->d_inode == NULL) { + cFYI(1, "not exists"); + inode = NULL; + if (cifs_sb_master_tcon(CIFS_SB(sb))->unix_ext) + rc = cifs_get_inode_info_unix(&inode, full_path, + sb, xid); + else + rc = cifs_get_inode_info(&inode, full_path, + NULL, sb, xid, NULL); + if (rc) { + dput(dchild); + dput(dparent); + dparent = NULL; + goto out; + } + alias = d_materialise_unique(dchild, inode); + if (alias != NULL) { + dput(dchild); + if (IS_ERR(alias)) { + dput(dparent); + dparent = NULL; + goto out; + } + dchild = alias; + } + } + cFYI(1, "parent %p, child %p", dparent, dchild); + + dput(dparent); + dparent = dchild; + len = 0; + pstart = full_path + i + 1; + full_path[i] = sep; + } +out: + _FreeXid(xid); + kfree(full_path); + return dparent; +} + static struct dentry * cifs_do_mount(struct file_system_type *fs_type, int flags, const char *dev_name, void *data) @@ -585,7 +677,10 @@ cifs_do_mount(struct file_system_type *fs_type, sb->s_flags |= MS_ACTIVE; - root = dget(sb->s_root); + root = cifs_get_root(volume_info, sb); + if (root == NULL) + goto out_super; + cFYI(1, "dentry root is: %p", root); goto out; out_super: diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 30699d9378e9..68ec457f8476 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -155,6 +155,61 @@ struct cifs_cred { ***************************************************************** */ +struct smb_vol { + char *username; + char *password; + char *domainname; + char *UNC; + char *UNCip; + char *iocharset; /* local code page for mapping to and from Unicode */ + char source_rfc1001_name[RFC1001_NAME_LEN_WITH_NULL]; /* clnt nb name */ + char target_rfc1001_name[RFC1001_NAME_LEN_WITH_NULL]; /* srvr nb name */ + uid_t cred_uid; + uid_t linux_uid; + gid_t linux_gid; + mode_t file_mode; + mode_t dir_mode; + unsigned secFlg; + bool retry:1; + bool intr:1; + bool setuids:1; + bool override_uid:1; + bool override_gid:1; + bool dynperm:1; + bool noperm:1; + bool no_psx_acl:1; /* set if posix acl support should be disabled */ + bool cifs_acl:1; + bool no_xattr:1; /* set if xattr (EA) support should be disabled*/ + bool server_ino:1; /* use inode numbers from server ie UniqueId */ + bool direct_io:1; + bool strict_io:1; /* strict cache behavior */ + bool remap:1; /* set to remap seven reserved chars in filenames */ + bool posix_paths:1; /* unset to not ask for posix pathnames. */ + bool no_linux_ext:1; + bool sfu_emul:1; + bool nullauth:1; /* attempt to authenticate with null user */ + bool nocase:1; /* request case insensitive filenames */ + bool nobrl:1; /* disable sending byte range locks to srv */ + bool mand_lock:1; /* send mandatory not posix byte range lock reqs */ + bool seal:1; /* request transport encryption on share */ + bool nodfs:1; /* Do not request DFS, even if available */ + bool local_lease:1; /* check leases only on local system, not remote */ + bool noblocksnd:1; + bool noautotune:1; + bool nostrictsync:1; /* do not force expensive SMBflush on every sync */ + bool fsc:1; /* enable fscache */ + bool mfsymlinks:1; /* use Minshall+French Symlinks */ + bool multiuser:1; + unsigned int rsize; + unsigned int wsize; + bool sockopt_tcp_nodelay:1; + unsigned short int port; + unsigned long actimeo; /* attribute cache timeout (jiffies) */ + char *prepath; + struct sockaddr_storage srcaddr; /* allow binding to a local IP */ + struct nls_table *local_nls; +}; + struct TCP_Server_Info { struct list_head tcp_ses_list; struct list_head smb_ses_list; @@ -517,6 +572,26 @@ static inline char CIFS_DIR_SEP(const struct cifs_sb_info *cifs_sb) return '\\'; } +static inline void +convert_delimiter(char *path, char delim) +{ + int i; + char old_delim; + + if (path == NULL) + return; + + if (delim == '/') + old_delim = '\\'; + else + old_delim = '/'; + + for (i = 0; path[i] != '\0'; i++) { + if (path[i] == old_delim) + path[i] = delim; + } +} + #ifdef CONFIG_CIFS_STATS #define cifs_stats_inc atomic_inc diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index eb3b58d9668f..e41f6071cdd2 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -57,8 +57,9 @@ extern int init_cifs_idmap(void); extern void exit_cifs_idmap(void); extern void cifs_destroy_idmaptrees(void); extern char *build_path_from_dentry(struct dentry *); -extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb, - struct cifsTconInfo *tcon); +extern char *cifs_build_path_to_root(struct smb_vol *vol, + struct cifs_sb_info *cifs_sb, + struct cifsTconInfo *tcon); extern char *build_wildcard_path_from_dentry(struct dentry *direntry); extern char *cifs_compose_mount_options(const char *sb_mountdata, const char *fullpath, const struct dfs_info3_param *ref, diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 581654fb174d..495688115988 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -57,61 +57,6 @@ extern mempool_t *cifs_req_poolp; -struct smb_vol { - char *username; - char *password; - char *domainname; - char *UNC; - char *UNCip; - char *iocharset; /* local code page for mapping to and from Unicode */ - char source_rfc1001_name[RFC1001_NAME_LEN_WITH_NULL]; /* clnt nb name */ - char target_rfc1001_name[RFC1001_NAME_LEN_WITH_NULL]; /* srvr nb name */ - uid_t cred_uid; - uid_t linux_uid; - gid_t linux_gid; - mode_t file_mode; - mode_t dir_mode; - unsigned secFlg; - bool retry:1; - bool intr:1; - bool setuids:1; - bool override_uid:1; - bool override_gid:1; - bool dynperm:1; - bool noperm:1; - bool no_psx_acl:1; /* set if posix acl support should be disabled */ - bool cifs_acl:1; - bool no_xattr:1; /* set if xattr (EA) support should be disabled*/ - bool server_ino:1; /* use inode numbers from server ie UniqueId */ - bool direct_io:1; - bool strict_io:1; /* strict cache behavior */ - bool remap:1; /* set to remap seven reserved chars in filenames */ - bool posix_paths:1; /* unset to not ask for posix pathnames. */ - bool no_linux_ext:1; - bool sfu_emul:1; - bool nullauth:1; /* attempt to authenticate with null user */ - bool nocase:1; /* request case insensitive filenames */ - bool nobrl:1; /* disable sending byte range locks to srv */ - bool mand_lock:1; /* send mandatory not posix byte range lock reqs */ - bool seal:1; /* request transport encryption on share */ - bool nodfs:1; /* Do not request DFS, even if available */ - bool local_lease:1; /* check leases only on local system, not remote */ - bool noblocksnd:1; - bool noautotune:1; - bool nostrictsync:1; /* do not force expensive SMBflush on every sync */ - bool fsc:1; /* enable fscache */ - bool mfsymlinks:1; /* use Minshall+French Symlinks */ - bool multiuser:1; - unsigned int rsize; - unsigned int wsize; - bool sockopt_tcp_nodelay:1; - unsigned short int port; - unsigned long actimeo; /* attribute cache timeout (jiffies) */ - char *prepath; - struct sockaddr_storage srcaddr; /* allow binding to a local IP */ - struct nls_table *local_nls; -}; - /* FIXME: should these be tunable? */ #define TLINK_ERROR_EXPIRE (1 * HZ) #define TLINK_IDLE_EXPIRE (600 * HZ) @@ -2569,12 +2514,6 @@ void reset_cifs_unix_caps(int xid, struct cifsTconInfo *tcon, CIFS_MOUNT_POSIX_PATHS; } - /* We might be setting the path sep back to a different - form if we are reconnecting and the server switched its - posix path capability for this share */ - if (sb && (CIFS_SB(sb)->prepathlen > 0)) - CIFS_SB(sb)->prepath[0] = CIFS_DIR_SEP(CIFS_SB(sb)); - if (sb && (CIFS_SB(sb)->rsize > 127 * 1024)) { if ((cap & CIFS_UNIX_LARGE_READ_CAP) == 0) { CIFS_SB(sb)->rsize = 127 * 1024; @@ -2619,26 +2558,6 @@ void reset_cifs_unix_caps(int xid, struct cifsTconInfo *tcon, } } -static void -convert_delimiter(char *path, char delim) -{ - int i; - char old_delim; - - if (path == NULL) - return; - - if (delim == '/') - old_delim = '\\'; - else - old_delim = '/'; - - for (i = 0; path[i] != '\0'; i++) { - if (path[i] == old_delim) - path[i] = delim; - } -} - void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, struct cifs_sb_info *cifs_sb) { @@ -2659,18 +2578,6 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, /* Windows ME may prefer this */ cFYI(1, "readsize set to minimum: 2048"); } - /* calculate prepath */ - cifs_sb->prepath = pvolume_info->prepath; - if (cifs_sb->prepath) { - cifs_sb->prepathlen = strlen(cifs_sb->prepath); - /* we can not convert the / to \ in the path - separators in the prefixpath yet because we do not - know (until reset_cifs_unix_caps is called later) - whether POSIX PATH CAP is available. We normalize - the / to \ after reset_cifs_unix_caps is called */ - pvolume_info->prepath = NULL; - } else - cifs_sb->prepathlen = 0; cifs_sb->mnt_uid = pvolume_info->linux_uid; cifs_sb->mnt_gid = pvolume_info->linux_gid; cifs_sb->mnt_file_mode = pvolume_info->file_mode; @@ -2834,24 +2741,13 @@ build_unc_path_to_root(const struct smb_vol *volume_info, char *full_path; int unc_len = strnlen(volume_info->UNC, MAX_TREE_SIZE + 1); - full_path = kmalloc(unc_len + cifs_sb->prepathlen + 1, GFP_KERNEL); + full_path = kmalloc(unc_len + 1, GFP_KERNEL); if (full_path == NULL) return ERR_PTR(-ENOMEM); strncpy(full_path, volume_info->UNC, unc_len); - if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) { - int i; - for (i = 0; i < unc_len; i++) { - if (full_path[i] == '\\') - full_path[i] = '/'; - } - } - - if (cifs_sb->prepathlen) - strncpy(full_path + unc_len, cifs_sb->prepath, - cifs_sb->prepathlen); - - full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */ + full_path[unc_len] = 0; /* add trailing null */ + convert_delimiter(full_path, CIFS_DIR_SEP(cifs_sb)); return full_path; } @@ -3049,10 +2945,6 @@ try_mount_again: CIFSSMBQFSAttributeInfo(xid, tcon); } - /* convert forward to back slashes in prepath here if needed */ - if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) - convert_delimiter(cifs_sb->prepath, CIFS_DIR_SEP(cifs_sb)); - if ((tcon->unix_ext == 0) && (cifs_sb->rsize > (1024 * 127))) { cifs_sb->rsize = 1024 * 127; cFYI(DBG2, "no very large read support, rsize now 127K"); @@ -3082,10 +2974,10 @@ remote_path_check: } #endif - /* check if a whole path (including prepath) is not remote */ + /* check if a whole path is not remote */ if (!rc && tcon) { /* build_path_to_root works only when we have a valid tcon */ - full_path = cifs_build_path_to_root(cifs_sb, tcon); + full_path = cifs_build_path_to_root(volume_info, cifs_sb, tcon); if (full_path == NULL) { rc = -ENOMEM; goto mount_fail_check; @@ -3111,10 +3003,6 @@ remote_path_check: rc = -ELOOP; goto mount_fail_check; } - /* convert forward to back slashes in prepath here if needed */ - if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0) - convert_delimiter(cifs_sb->prepath, - CIFS_DIR_SEP(cifs_sb)); rc = expand_dfs_referral(xid, pSesInfo, volume_info, cifs_sb, true); @@ -3340,7 +3228,6 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) struct rb_root *root = &cifs_sb->tlink_tree; struct rb_node *node; struct tcon_link *tlink; - char *tmp; cancel_delayed_work_sync(&cifs_sb->prune_tlinks); @@ -3357,11 +3244,6 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) } spin_unlock(&cifs_sb->tlink_tree_lock); - tmp = cifs_sb->prepath; - cifs_sb->prepathlen = 0; - cifs_sb->prepath = NULL; - kfree(tmp); - return 0; } diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index 0521492f5b3b..aa0669a82922 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -50,7 +50,6 @@ build_path_from_dentry(struct dentry *direntry) { struct dentry *temp; int namelen; - int pplen; int dfsplen; char *full_path; char dirsep; @@ -63,13 +62,12 @@ build_path_from_dentry(struct dentry *direntry) when the server crashed */ dirsep = CIFS_DIR_SEP(cifs_sb); - pplen = cifs_sb->prepathlen; if (tcon->Flags & SMB_SHARE_IS_IN_DFS) dfsplen = strnlen(tcon->treeName, MAX_TREE_SIZE + 1); else dfsplen = 0; cifs_bp_rename_retry: - namelen = pplen + dfsplen; + namelen = dfsplen; for (temp = direntry; !IS_ROOT(temp);) { namelen += (1 + temp->d_name.len); temp = temp->d_parent; @@ -100,7 +98,7 @@ cifs_bp_rename_retry: return NULL; } } - if (namelen != pplen + dfsplen) { + if (namelen != dfsplen) { cERROR(1, "did not end path lookup where expected namelen is %d", namelen); /* presumably this is only possible if racing with a rename @@ -126,7 +124,6 @@ cifs_bp_rename_retry: } } } - strncpy(full_path + dfsplen, CIFS_SB(direntry->d_sb)->prepath, pplen); return full_path; } diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 5e278d37912b..53ea6250a51d 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -735,10 +735,10 @@ static const struct inode_operations cifs_ipc_inode_ops = { .lookup = cifs_lookup, }; -char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb, - struct cifsTconInfo *tcon) +char *cifs_build_path_to_root(struct smb_vol *vol, struct cifs_sb_info *cifs_sb, + struct cifsTconInfo *tcon) { - int pplen = cifs_sb->prepathlen; + int pplen = vol->prepath ? strlen(vol->prepath) : 0; int dfsplen; char *full_path = NULL; @@ -772,7 +772,7 @@ char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb, } } } - strncpy(full_path + dfsplen, cifs_sb->prepath, pplen); + strncpy(full_path + dfsplen, vol->prepath, pplen); full_path[dfsplen + pplen] = 0; /* add trailing null */ return full_path; } @@ -884,19 +884,13 @@ struct inode *cifs_root_iget(struct super_block *sb) struct cifs_sb_info *cifs_sb = CIFS_SB(sb); struct inode *inode = NULL; long rc; - char *full_path; struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb); - full_path = cifs_build_path_to_root(cifs_sb, tcon); - if (full_path == NULL) - return ERR_PTR(-ENOMEM); - xid = GetXid(); if (tcon->unix_ext) - rc = cifs_get_inode_info_unix(&inode, full_path, sb, xid); + rc = cifs_get_inode_info_unix(&inode, "", sb, xid); else - rc = cifs_get_inode_info(&inode, full_path, NULL, sb, - xid, NULL); + rc = cifs_get_inode_info(&inode, "", NULL, sb, xid, NULL); if (!inode) { inode = ERR_PTR(rc); @@ -922,7 +916,6 @@ struct inode *cifs_root_iget(struct super_block *sb) } out: - kfree(full_path); /* can not call macro FreeXid here since in a void func * TODO: This is no longer true */ -- cgit v1.2.3 From 25c7f41e9234f60af30e086278f1de7974f8816f Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Thu, 26 May 2011 23:35:47 +0400 Subject: CIFS: Migrate to shared superblock model Add cifs_match_super to use in sget to share superblock between mounts that have the same //server/sharename, credentials and mount options. It helps us to improve performance on work with future SMB2.1 leases. Reviewed-by: Jeff Layton Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 19 +++++++++- fs/cifs/cifsglob.h | 19 ++++++++++ fs/cifs/connect.c | 102 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 139 insertions(+), 1 deletion(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 46fdd55cf427..360fe2ec2a19 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -630,6 +630,7 @@ cifs_do_mount(struct file_system_type *fs_type, struct super_block *sb; struct cifs_sb_info *cifs_sb; struct smb_vol *volume_info; + struct cifs_mnt_data mnt_data; struct dentry *root; cFYI(1, "Devname: %s flags: %d ", dev_name, flags); @@ -646,12 +647,21 @@ cifs_do_mount(struct file_system_type *fs_type, cifs_setup_cifs_sb(volume_info, cifs_sb); - sb = sget(fs_type, NULL, set_anon_super, NULL); + mnt_data.vol = volume_info; + mnt_data.cifs_sb = cifs_sb; + mnt_data.flags = flags; + + sb = sget(fs_type, cifs_match_super, set_anon_super, &mnt_data); if (IS_ERR(sb)) { root = ERR_CAST(sb); goto out_cifs_sb; } + if (sb->s_fs_info) { + cFYI(1, "Use existing superblock"); + goto out_shared; + } + /* * Copy mount params for use in submounts. Better to do * the copy here and deal with the error before cleanup gets @@ -680,9 +690,16 @@ cifs_do_mount(struct file_system_type *fs_type, root = cifs_get_root(volume_info, sb); if (root == NULL) goto out_super; + cFYI(1, "dentry root is: %p", root); goto out; +out_shared: + root = cifs_get_root(volume_info, sb); + if (root) + cFYI(1, "dentry root is: %p", root); + goto out; + out_super: kfree(cifs_sb->mountdata); deactivate_locked_super(sb); diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 68ec457f8476..ca0c3789206e 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -210,6 +210,25 @@ struct smb_vol { struct nls_table *local_nls; }; +#define CIFS_MOUNT_MASK (CIFS_MOUNT_NO_PERM | CIFS_MOUNT_SET_UID | \ + CIFS_MOUNT_SERVER_INUM | CIFS_MOUNT_DIRECT_IO | \ + CIFS_MOUNT_NO_XATTR | CIFS_MOUNT_MAP_SPECIAL_CHR | \ + CIFS_MOUNT_UNX_EMUL | CIFS_MOUNT_NO_BRL | \ + CIFS_MOUNT_CIFS_ACL | CIFS_MOUNT_OVERR_UID | \ + CIFS_MOUNT_OVERR_GID | CIFS_MOUNT_DYNPERM | \ + CIFS_MOUNT_NOPOSIXBRL | CIFS_MOUNT_NOSSYNC | \ + CIFS_MOUNT_FSCACHE | CIFS_MOUNT_MF_SYMLINKS | \ + CIFS_MOUNT_MULTIUSER | CIFS_MOUNT_STRICT_IO) + +#define CIFS_MS_MASK (MS_RDONLY | MS_MANDLOCK | MS_NOEXEC | MS_NOSUID | \ + MS_NODEV | MS_SYNCHRONOUS) + +struct cifs_mnt_data { + struct cifs_sb_info *cifs_sb; + struct smb_vol *vol; + int flags; +}; + struct TCP_Server_Info { struct list_head tcp_ses_list; struct list_head smb_ses_list; diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 495688115988..261ca81d5e49 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2146,6 +2146,100 @@ cifs_put_tlink(struct tcon_link *tlink) return; } +static inline struct tcon_link * +cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb); + +static int +compare_mount_options(struct super_block *sb, struct cifs_mnt_data *mnt_data) +{ + struct cifs_sb_info *old = CIFS_SB(sb); + struct cifs_sb_info *new = mnt_data->cifs_sb; + + if ((sb->s_flags & CIFS_MS_MASK) != (mnt_data->flags & CIFS_MS_MASK)) + return 0; + + if ((old->mnt_cifs_flags & CIFS_MOUNT_MASK) != + (new->mnt_cifs_flags & CIFS_MOUNT_MASK)) + return 0; + + if (old->rsize != new->rsize) + return 0; + + /* + * We want to share sb only if we don't specify wsize or specified wsize + * is greater or equal than existing one. + */ + if (new->wsize && new->wsize < old->wsize) + return 0; + + if (old->mnt_uid != new->mnt_uid || old->mnt_gid != new->mnt_gid) + return 0; + + if (old->mnt_file_mode != new->mnt_file_mode || + old->mnt_dir_mode != new->mnt_dir_mode) + return 0; + + if (strcmp(old->local_nls->charset, new->local_nls->charset)) + return 0; + + if (old->actimeo != new->actimeo) + return 0; + + return 1; +} + +int +cifs_match_super(struct super_block *sb, void *data) +{ + struct cifs_mnt_data *mnt_data = (struct cifs_mnt_data *)data; + struct smb_vol *volume_info; + struct cifs_sb_info *cifs_sb; + struct TCP_Server_Info *tcp_srv; + struct cifsSesInfo *ses; + struct cifsTconInfo *tcon; + struct tcon_link *tlink; + struct sockaddr_storage addr; + int rc = 0; + + memset(&addr, 0, sizeof(struct sockaddr_storage)); + + spin_lock(&cifs_tcp_ses_lock); + cifs_sb = CIFS_SB(sb); + tlink = cifs_get_tlink(cifs_sb_master_tlink(cifs_sb)); + if (IS_ERR(tlink)) { + spin_unlock(&cifs_tcp_ses_lock); + return rc; + } + tcon = tlink_tcon(tlink); + ses = tcon->ses; + tcp_srv = ses->server; + + volume_info = mnt_data->vol; + + if (!volume_info->UNCip || !volume_info->UNC) + goto out; + + rc = cifs_fill_sockaddr((struct sockaddr *)&addr, + volume_info->UNCip, + strlen(volume_info->UNCip), + volume_info->port); + if (!rc) + goto out; + + if (!match_server(tcp_srv, (struct sockaddr *)&addr, volume_info) || + !match_session(ses, volume_info) || + !match_tcon(tcon, volume_info->UNC)) { + rc = 0; + goto out; + } + + rc = compare_mount_options(sb, mnt_data); +out: + cifs_put_tlink(tlink); + spin_unlock(&cifs_tcp_ses_lock); + return rc; +} + int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path, const struct nls_table *nls_codepage, unsigned int *pnum_referrals, @@ -2578,6 +2672,14 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, /* Windows ME may prefer this */ cFYI(1, "readsize set to minimum: 2048"); } + + /* + * Temporarily set wsize for matching superblock. If we end up using + * new sb then cifs_negotiate_wsize will later negotiate it downward + * if needed. + */ + cifs_sb->wsize = pvolume_info->wsize; + cifs_sb->mnt_uid = pvolume_info->linux_uid; cifs_sb->mnt_gid = pvolume_info->linux_gid; cifs_sb->mnt_file_mode = pvolume_info->file_mode; -- cgit v1.2.3 From d4ffff1fa9695c5b5c0bf337e208d8833b88ff2d Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Thu, 26 May 2011 06:02:00 +0000 Subject: CIFS: Add rwpidforward mount option Add rwpidforward mount option that switches on a mode when we forward pid of a process who opened a file to any read and write operation. This can prevent applications like WINE from failing on read or write operation on a previously locked file region from the same netfd from another process if we use mandatory brlock style. It is actual for WINE because during a run of WINE program two processes work on the same netfd - share the same file struct between several VFS fds: 1) WINE-server does open and lock; 2) WINE-application does read and write. Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/README | 3 ++ fs/cifs/cifs_fs_sb.h | 1 + fs/cifs/cifsfs.c | 8 +++++ fs/cifs/cifsglob.h | 1 + fs/cifs/cifsproto.h | 5 ++-- fs/cifs/cifssmb.c | 17 +++++++---- fs/cifs/connect.c | 4 +++ fs/cifs/file.c | 82 +++++++++++++++++++++++++++++++++++++++------------- fs/cifs/inode.c | 11 +++++-- fs/cifs/link.c | 22 +++++++++----- 10 files changed, 115 insertions(+), 39 deletions(-) diff --git a/fs/cifs/README b/fs/cifs/README index 4a3ca0e5ca24..c5c2c5e5f0f2 100644 --- a/fs/cifs/README +++ b/fs/cifs/README @@ -457,6 +457,9 @@ A partial list of the supported mount options follows: otherwise - read from the server. All written data are stored in the cache, but if the client doesn't have Exclusive Oplock, it writes the data to the server. + rwpidforward Forward pid of a process who opened a file to any read or write + operation on that file. This prevent applications like WINE + from failing on read and write if we use mandatory brlock style. acl Allow setfacl and getfacl to manage posix ACLs if server supports them. (default) noacl Do not allow setfacl and getfacl calls on this mount diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h index c96b44b4e262..ffb1459dc6ec 100644 --- a/fs/cifs/cifs_fs_sb.h +++ b/fs/cifs/cifs_fs_sb.h @@ -41,6 +41,7 @@ #define CIFS_MOUNT_MF_SYMLINKS 0x10000 /* Minshall+French Symlinks enabled */ #define CIFS_MOUNT_MULTIUSER 0x20000 /* multiuser mount */ #define CIFS_MOUNT_STRICT_IO 0x40000 /* strict cache mode */ +#define CIFS_MOUNT_RWPIDFORWARD 0x80000 /* use pid forwarding for rw */ struct cifs_sb_info { struct rb_root tlink_tree; diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 360fe2ec2a19..26981bf2cf3f 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -415,12 +415,20 @@ cifs_show_options(struct seq_file *s, struct vfsmount *m) seq_printf(s, ",nocase"); if (tcon->retry) seq_printf(s, ",hard"); + if (tcon->unix_ext) + seq_printf(s, ",unix"); + else + seq_printf(s, ",nounix"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) seq_printf(s, ",posixpaths"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) seq_printf(s, ",setuids"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) seq_printf(s, ",serverino"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_RWPIDFORWARD) + seq_printf(s, ",rwpidforward"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NOPOSIXBRL) + seq_printf(s, ",forcemand"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO) seq_printf(s, ",directio"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR) diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index ca0c3789206e..310cddabd3fd 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -200,6 +200,7 @@ struct smb_vol { bool fsc:1; /* enable fscache */ bool mfsymlinks:1; /* use Minshall+French Symlinks */ bool multiuser:1; + bool rwpidforward:1; /* pid forward for read/write operations */ unsigned int rsize; unsigned int wsize; bool sockopt_tcp_nodelay:1; diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index e41f6071cdd2..17063455918f 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -345,9 +345,8 @@ extern int CIFSSMBClose(const int xid, struct cifsTconInfo *tcon, extern int CIFSSMBFlush(const int xid, struct cifsTconInfo *tcon, const int smb_file_id); -extern int CIFSSMBRead(const int xid, struct cifsTconInfo *tcon, - const int netfid, unsigned int count, - const __u64 lseek, unsigned int *nbytes, char **buf, +extern int CIFSSMBRead(const int xid, struct cifs_io_parms *io_parms, + unsigned int *nbytes, char **buf, int *return_buf_type); extern int CIFSSMBWrite(const int xid, struct cifs_io_parms *io_parms, unsigned int *nbytes, const char *buf, diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index f39fa08b9b0e..19fd8158bb47 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1382,8 +1382,7 @@ openRetry: } int -CIFSSMBRead(const int xid, struct cifsTconInfo *tcon, const int netfid, - const unsigned int count, const __u64 lseek, unsigned int *nbytes, +CIFSSMBRead(const int xid, struct cifs_io_parms *io_parms, unsigned int *nbytes, char **buf, int *pbuf_type) { int rc = -EACCES; @@ -1393,13 +1392,18 @@ CIFSSMBRead(const int xid, struct cifsTconInfo *tcon, const int netfid, int wct; int resp_buf_type = 0; struct kvec iov[1]; + __u32 pid = io_parms->pid; + __u16 netfid = io_parms->netfid; + __u64 offset = io_parms->offset; + struct cifsTconInfo *tcon = io_parms->tcon; + unsigned int count = io_parms->length; cFYI(1, "Reading %d bytes on fid %d", count, netfid); if (tcon->ses->capabilities & CAP_LARGE_FILES) wct = 12; else { wct = 10; /* old style read */ - if ((lseek >> 32) > 0) { + if ((offset >> 32) > 0) { /* can not handle this big offset for old */ return -EIO; } @@ -1410,15 +1414,18 @@ CIFSSMBRead(const int xid, struct cifsTconInfo *tcon, const int netfid, if (rc) return rc; + pSMB->hdr.Pid = cpu_to_le16((__u16)pid); + pSMB->hdr.PidHigh = cpu_to_le16((__u16)(pid >> 16)); + /* tcon and ses pointer are checked in smb_init */ if (tcon->ses->server == NULL) return -ECONNABORTED; pSMB->AndXCommand = 0xFF; /* none */ pSMB->Fid = netfid; - pSMB->OffsetLow = cpu_to_le32(lseek & 0xFFFFFFFF); + pSMB->OffsetLow = cpu_to_le32(offset & 0xFFFFFFFF); if (wct == 12) - pSMB->OffsetHigh = cpu_to_le32(lseek >> 32); + pSMB->OffsetHigh = cpu_to_le32(offset >> 32); pSMB->Remaining = 0; pSMB->MaxCount = cpu_to_le16(count & 0xFFFF); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 261ca81d5e49..21bc83586beb 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1359,6 +1359,8 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, vol->server_ino = 1; } else if (strnicmp(data, "noserverino", 9) == 0) { vol->server_ino = 0; + } else if (strnicmp(data, "rwpidforward", 4) == 0) { + vol->rwpidforward = 1; } else if (strnicmp(data, "cifsacl", 7) == 0) { vol->cifs_acl = 1; } else if (strnicmp(data, "nocifsacl", 9) == 0) { @@ -2708,6 +2710,8 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NOSSYNC; if (pvolume_info->mand_lock) cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NOPOSIXBRL; + if (pvolume_info->rwpidforward) + cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_RWPIDFORWARD; if (pvolume_info->cifs_acl) cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL; if (pvolume_info->override_uid) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index dfc0d35b1470..7db74d17a429 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -725,8 +725,8 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock) else posix_lock_type = CIFS_WRLCK; rc = CIFSSMBPosixLock(xid, tcon, netfid, 1 /* get */, - length, pfLock, - posix_lock_type, wait_flag); + length, pfLock, posix_lock_type, + wait_flag); FreeXid(xid); return rc; } @@ -797,8 +797,8 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock) posix_lock_type = CIFS_UNLCK; rc = CIFSSMBPosixLock(xid, tcon, netfid, 0 /* set */, - length, pfLock, - posix_lock_type, wait_flag); + length, pfLock, posix_lock_type, + wait_flag); } else { struct cifsFileInfo *fid = file->private_data; @@ -1346,6 +1346,14 @@ static int cifs_write_end(struct file *file, struct address_space *mapping, { int rc; struct inode *inode = mapping->host; + struct cifsFileInfo *cfile = file->private_data; + struct cifs_sb_info *cifs_sb = CIFS_SB(cfile->dentry->d_sb); + __u32 pid; + + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_RWPIDFORWARD) + pid = cfile->pid; + else + pid = current->tgid; cFYI(1, "write_end for page %p from pos %lld with %d bytes", page, pos, copied); @@ -1369,8 +1377,7 @@ static int cifs_write_end(struct file *file, struct address_space *mapping, /* BB check if anything else missing out of ppw such as updating last write time */ page_data = kmap(page); - rc = cifs_write(file->private_data, current->tgid, - page_data + offset, copied, &pos); + rc = cifs_write(cfile, pid, page_data + offset, copied, &pos); /* if (rc < 0) should we set writebehind rc? */ kunmap(page); @@ -1523,6 +1530,7 @@ cifs_iovec_write(struct file *file, const struct iovec *iov, struct cifs_sb_info *cifs_sb; struct cifs_io_parms io_parms; int xid, rc; + __u32 pid; len = iov_length(iov, nr_segs); if (!len) @@ -1554,6 +1562,12 @@ cifs_iovec_write(struct file *file, const struct iovec *iov, xid = GetXid(); open_file = file->private_data; + + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_RWPIDFORWARD) + pid = open_file->pid; + else + pid = current->tgid; + pTcon = tlink_tcon(open_file->tlink); inode = file->f_path.dentry->d_inode; @@ -1581,7 +1595,7 @@ cifs_iovec_write(struct file *file, const struct iovec *iov, break; } io_parms.netfid = open_file->netfid; - io_parms.pid = current->tgid; + io_parms.pid = pid; io_parms.tcon = pTcon; io_parms.offset = *poffset; io_parms.length = cur_len; @@ -1682,7 +1696,9 @@ cifs_iovec_read(struct file *file, const struct iovec *iov, struct cifsTconInfo *pTcon; struct cifsFileInfo *open_file; struct smb_com_read_rsp *pSMBr; + struct cifs_io_parms io_parms; char *read_data; + __u32 pid; if (!nr_segs) return 0; @@ -1697,6 +1713,11 @@ cifs_iovec_read(struct file *file, const struct iovec *iov, open_file = file->private_data; pTcon = tlink_tcon(open_file->tlink); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_RWPIDFORWARD) + pid = open_file->pid; + else + pid = current->tgid; + if ((file->f_flags & O_ACCMODE) == O_WRONLY) cFYI(1, "attempting read on write only file instance"); @@ -1712,8 +1733,12 @@ cifs_iovec_read(struct file *file, const struct iovec *iov, if (rc != 0) break; } - rc = CIFSSMBRead(xid, pTcon, open_file->netfid, - cur_len, *poffset, &bytes_read, + io_parms.netfid = open_file->netfid; + io_parms.pid = pid; + io_parms.tcon = pTcon; + io_parms.offset = *poffset; + io_parms.length = len; + rc = CIFSSMBRead(xid, &io_parms, &bytes_read, &read_data, &buf_type); pSMBr = (struct smb_com_read_rsp *)read_data; if (read_data) { @@ -1794,7 +1819,9 @@ static ssize_t cifs_read(struct file *file, char *read_data, size_t read_size, int xid; char *current_offset; struct cifsFileInfo *open_file; + struct cifs_io_parms io_parms; int buf_type = CIFS_NO_BUFFER; + __u32 pid; xid = GetXid(); cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); @@ -1807,6 +1834,11 @@ static ssize_t cifs_read(struct file *file, char *read_data, size_t read_size, open_file = file->private_data; pTcon = tlink_tcon(open_file->tlink); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_RWPIDFORWARD) + pid = open_file->pid; + else + pid = current->tgid; + if ((file->f_flags & O_ACCMODE) == O_WRONLY) cFYI(1, "attempting read on write only file instance"); @@ -1829,11 +1861,13 @@ static ssize_t cifs_read(struct file *file, char *read_data, size_t read_size, if (rc != 0) break; } - rc = CIFSSMBRead(xid, pTcon, - open_file->netfid, - current_read_size, *poffset, - &bytes_read, ¤t_offset, - &buf_type); + io_parms.netfid = open_file->netfid; + io_parms.pid = pid; + io_parms.tcon = pTcon; + io_parms.offset = *poffset; + io_parms.length = current_read_size; + rc = CIFSSMBRead(xid, &io_parms, &bytes_read, + ¤t_offset, &buf_type); } if (rc || (bytes_read == 0)) { if (total_read) { @@ -1970,7 +2004,9 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, char *smb_read_data = NULL; struct smb_com_read_rsp *pSMBr; struct cifsFileInfo *open_file; + struct cifs_io_parms io_parms; int buf_type = CIFS_NO_BUFFER; + __u32 pid; xid = GetXid(); if (file->private_data == NULL) { @@ -1992,6 +2028,11 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, goto read_complete; cFYI(DBG2, "rpages: num pages %d", num_pages); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_RWPIDFORWARD) + pid = open_file->pid; + else + pid = current->tgid; + for (i = 0; i < num_pages; ) { unsigned contig_pages; struct page *tmp_page; @@ -2033,12 +2074,13 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, if (rc != 0) break; } - - rc = CIFSSMBRead(xid, pTcon, - open_file->netfid, - read_size, offset, - &bytes_read, &smb_read_data, - &buf_type); + io_parms.netfid = open_file->netfid; + io_parms.pid = pid; + io_parms.tcon = pTcon; + io_parms.offset = offset; + io_parms.length = read_size; + rc = CIFSSMBRead(xid, &io_parms, &bytes_read, + &smb_read_data, &buf_type); /* BB more RC checks ? */ if (rc == -EAGAIN) { if (smb_read_data) { diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 53ea6250a51d..e2d9dd817ba0 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -374,6 +374,7 @@ cifs_sfu_type(struct cifs_fattr *fattr, const unsigned char *path, __u16 netfid; struct tcon_link *tlink; struct cifsTconInfo *tcon; + struct cifs_io_parms io_parms; char buf[24]; unsigned int bytes_read; char *pbuf; @@ -405,9 +406,13 @@ cifs_sfu_type(struct cifs_fattr *fattr, const unsigned char *path, if (rc == 0) { int buf_type = CIFS_NO_BUFFER; /* Read header */ - rc = CIFSSMBRead(xid, tcon, netfid, - 24 /* length */, 0 /* offset */, - &bytes_read, &pbuf, &buf_type); + io_parms.netfid = netfid; + io_parms.pid = current->tgid; + io_parms.tcon = tcon; + io_parms.offset = 0; + io_parms.length = 24; + rc = CIFSSMBRead(xid, &io_parms, &bytes_read, &pbuf, + &buf_type); if ((rc == 0) && (bytes_read >= 8)) { if (memcmp("IntxBLK", pbuf, 8) == 0) { cFYI(1, "Block device"); diff --git a/fs/cifs/link.c b/fs/cifs/link.c index 1a6a388cf5d8..4682d44b6f5b 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -235,6 +235,7 @@ CIFSQueryMFSymLink(const int xid, struct cifsTconInfo *tcon, unsigned int bytes_read = 0; int buf_type = CIFS_NO_BUFFER; unsigned int link_len = 0; + struct cifs_io_parms io_parms; FILE_ALL_INFO file_info; rc = CIFSSMBOpen(xid, tcon, searchName, FILE_OPEN, GENERIC_READ, @@ -253,11 +254,13 @@ CIFSQueryMFSymLink(const int xid, struct cifsTconInfo *tcon, if (!buf) return -ENOMEM; pbuf = buf; + io_parms.netfid = netfid; + io_parms.pid = current->tgid; + io_parms.tcon = tcon; + io_parms.offset = 0; + io_parms.length = CIFS_MF_SYMLINK_FILE_SIZE; - rc = CIFSSMBRead(xid, tcon, netfid, - CIFS_MF_SYMLINK_FILE_SIZE /* length */, - 0 /* offset */, - &bytes_read, &pbuf, &buf_type); + rc = CIFSSMBRead(xid, &io_parms, &bytes_read, &pbuf, &buf_type); CIFSSMBClose(xid, tcon, netfid); if (rc != 0) { kfree(buf); @@ -296,6 +299,7 @@ CIFSCheckMFSymlink(struct cifs_fattr *fattr, __u16 netfid = 0; struct tcon_link *tlink; struct cifsTconInfo *pTcon; + struct cifs_io_parms io_parms; u8 *buf; char *pbuf; unsigned int bytes_read = 0; @@ -332,11 +336,13 @@ CIFSCheckMFSymlink(struct cifs_fattr *fattr, goto out; } pbuf = buf; + io_parms.netfid = netfid; + io_parms.pid = current->tgid; + io_parms.tcon = pTcon; + io_parms.offset = 0; + io_parms.length = CIFS_MF_SYMLINK_FILE_SIZE; - rc = CIFSSMBRead(xid, pTcon, netfid, - CIFS_MF_SYMLINK_FILE_SIZE /* length */, - 0 /* offset */, - &bytes_read, &pbuf, &buf_type); + rc = CIFSSMBRead(xid, &io_parms, &bytes_read, &pbuf, &buf_type); CIFSSMBClose(xid, pTcon, netfid); if (rc != 0) { kfree(buf); -- cgit v1.2.3 From 07cc6cf9ef84bcf6a60ee513332bcb0ad5d628d8 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 27 May 2011 04:12:29 +0000 Subject: Fix extended security auth failure Fix authentication failures using extended security mechanisms. cifs client does not take into consideration extended security bit in capabilities field in negotiate protocol response from the server. Please refer to Samba bugzilla 8046. Reported-and-tested by: Werner Maes Signed-off-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/cifssmb.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 19fd8158bb47..fc9b5fa98efd 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -571,18 +571,10 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) if (pSMBr->EncryptionKeyLength == CIFS_CRYPTO_KEY_SIZE) { memcpy(ses->server->cryptkey, pSMBr->u.EncryptionKey, CIFS_CRYPTO_KEY_SIZE); - } else if ((pSMBr->hdr.Flags2 & SMBFLG2_EXT_SEC) - && (pSMBr->EncryptionKeyLength == 0)) { + } else if ((pSMBr->hdr.Flags2 & SMBFLG2_EXT_SEC || + server->capabilities & CAP_EXTENDED_SECURITY) && + (pSMBr->EncryptionKeyLength == 0)) { /* decode security blob */ - } else if (server->secMode & SECMODE_PW_ENCRYPT) { - rc = -EIO; /* no crypt key only if plain text pwd */ - goto neg_err_exit; - } - - /* BB might be helpful to save off the domain of server here */ - - if ((pSMBr->hdr.Flags2 & SMBFLG2_EXT_SEC) && - (server->capabilities & CAP_EXTENDED_SECURITY)) { count = get_bcc(&pSMBr->hdr); if (count < 16) { rc = -EIO; @@ -625,6 +617,9 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) } else rc = -EOPNOTSUPP; } + } else if (server->secMode & SECMODE_PW_ENCRYPT) { + rc = -EIO; /* no crypt key only if plain text pwd */ + goto neg_err_exit; } else server->capabilities &= ~CAP_EXTENDED_SECURITY; -- cgit v1.2.3 From 96daf2b09178d8ebde2b0d56b027de917c17dfdf Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 27 May 2011 04:34:02 +0000 Subject: [CIFS] Rename three structures to avoid camel case secMode to sec_mode and cifsTconInfo to cifs_tcon and cifsSesInfo to cifs_ses Signed-off-by: Steve French --- fs/cifs/cache.c | 6 +- fs/cifs/cifs_debug.c | 26 ++++---- fs/cifs/cifs_dfs_ref.c | 2 +- fs/cifs/cifs_spnego.c | 2 +- fs/cifs/cifs_spnego.h | 2 +- fs/cifs/cifsacl.c | 4 +- fs/cifs/cifsencrypt.c | 14 ++--- fs/cifs/cifsfs.c | 6 +- fs/cifs/cifsglob.h | 22 +++---- fs/cifs/cifsproto.h | 152 ++++++++++++++++++++++---------------------- fs/cifs/cifssmb.c | 166 ++++++++++++++++++++++++------------------------- fs/cifs/connect.c | 90 +++++++++++++-------------- fs/cifs/dir.c | 8 +-- fs/cifs/file.c | 28 ++++----- fs/cifs/fscache.c | 6 +- fs/cifs/fscache.h | 8 +-- fs/cifs/inode.c | 40 ++++++------ fs/cifs/ioctl.c | 2 +- fs/cifs/link.c | 12 ++-- fs/cifs/misc.c | 32 +++++----- fs/cifs/readdir.c | 8 +-- fs/cifs/sess.c | 42 ++++++------- fs/cifs/transport.c | 20 +++--- fs/cifs/xattr.c | 8 +-- 24 files changed, 353 insertions(+), 353 deletions(-) diff --git a/fs/cifs/cache.c b/fs/cifs/cache.c index 53d57a3fe427..dd8584d35a14 100644 --- a/fs/cifs/cache.c +++ b/fs/cifs/cache.c @@ -146,7 +146,7 @@ static char *extract_sharename(const char *treename) static uint16_t cifs_super_get_key(const void *cookie_netfs_data, void *buffer, uint16_t maxbuf) { - const struct cifsTconInfo *tcon = cookie_netfs_data; + const struct cifs_tcon *tcon = cookie_netfs_data; char *sharename; uint16_t len; @@ -173,7 +173,7 @@ cifs_fscache_super_get_aux(const void *cookie_netfs_data, void *buffer, uint16_t maxbuf) { struct cifs_fscache_super_auxdata auxdata; - const struct cifsTconInfo *tcon = cookie_netfs_data; + const struct cifs_tcon *tcon = cookie_netfs_data; memset(&auxdata, 0, sizeof(auxdata)); auxdata.resource_id = tcon->resource_id; @@ -192,7 +192,7 @@ fscache_checkaux cifs_fscache_super_check_aux(void *cookie_netfs_data, uint16_t datalen) { struct cifs_fscache_super_auxdata auxdata; - const struct cifsTconInfo *tcon = cookie_netfs_data; + const struct cifs_tcon *tcon = cookie_netfs_data; if (datalen != sizeof(auxdata)) return FSCACHE_CHECKAUX_OBSOLETE; diff --git a/fs/cifs/cifs_debug.c b/fs/cifs/cifs_debug.c index 18f4272d9047..2fe3cf13b2e9 100644 --- a/fs/cifs/cifs_debug.c +++ b/fs/cifs/cifs_debug.c @@ -110,8 +110,8 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) struct list_head *tmp1, *tmp2, *tmp3; struct mid_q_entry *mid_entry; struct TCP_Server_Info *server; - struct cifsSesInfo *ses; - struct cifsTconInfo *tcon; + struct cifs_ses *ses; + struct cifs_tcon *tcon; int i, j; __u32 dev_type; @@ -152,7 +152,7 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) tcp_ses_list); i++; list_for_each(tmp2, &server->smb_ses_list) { - ses = list_entry(tmp2, struct cifsSesInfo, + ses = list_entry(tmp2, struct cifs_ses, smb_ses_list); if ((ses->serverDomain == NULL) || (ses->serverOS == NULL) || @@ -171,7 +171,7 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) seq_printf(m, "TCP status: %d\n\tLocal Users To " "Server: %d SecMode: 0x%x Req On Wire: %d", server->tcpStatus, server->srv_count, - server->secMode, + server->sec_mode, atomic_read(&server->inFlight)); #ifdef CONFIG_CIFS_STATS2 @@ -183,7 +183,7 @@ static int cifs_debug_data_proc_show(struct seq_file *m, void *v) seq_puts(m, "\n\tShares:"); j = 0; list_for_each(tmp3, &ses->tcon_list) { - tcon = list_entry(tmp3, struct cifsTconInfo, + tcon = list_entry(tmp3, struct cifs_tcon, tcon_list); ++j; dev_type = le32_to_cpu(tcon->fsDevInfo.DeviceType); @@ -256,8 +256,8 @@ static ssize_t cifs_stats_proc_write(struct file *file, int rc; struct list_head *tmp1, *tmp2, *tmp3; struct TCP_Server_Info *server; - struct cifsSesInfo *ses; - struct cifsTconInfo *tcon; + struct cifs_ses *ses; + struct cifs_tcon *tcon; rc = get_user(c, buffer); if (rc) @@ -273,11 +273,11 @@ static ssize_t cifs_stats_proc_write(struct file *file, server = list_entry(tmp1, struct TCP_Server_Info, tcp_ses_list); list_for_each(tmp2, &server->smb_ses_list) { - ses = list_entry(tmp2, struct cifsSesInfo, + ses = list_entry(tmp2, struct cifs_ses, smb_ses_list); list_for_each(tmp3, &ses->tcon_list) { tcon = list_entry(tmp3, - struct cifsTconInfo, + struct cifs_tcon, tcon_list); atomic_set(&tcon->num_smbs_sent, 0); atomic_set(&tcon->num_writes, 0); @@ -312,8 +312,8 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v) int i; struct list_head *tmp1, *tmp2, *tmp3; struct TCP_Server_Info *server; - struct cifsSesInfo *ses; - struct cifsTconInfo *tcon; + struct cifs_ses *ses; + struct cifs_tcon *tcon; seq_printf(m, "Resources in use\nCIFS Session: %d\n", @@ -346,11 +346,11 @@ static int cifs_stats_proc_show(struct seq_file *m, void *v) server = list_entry(tmp1, struct TCP_Server_Info, tcp_ses_list); list_for_each(tmp2, &server->smb_ses_list) { - ses = list_entry(tmp2, struct cifsSesInfo, + ses = list_entry(tmp2, struct cifs_ses, smb_ses_list); list_for_each(tmp3, &ses->tcon_list) { tcon = list_entry(tmp3, - struct cifsTconInfo, + struct cifs_tcon, tcon_list); i++; seq_printf(m, "\n%d) %s", i, tcon->treeName); diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c index 2b68ac57d97d..8d8f28c94c0f 100644 --- a/fs/cifs/cifs_dfs_ref.c +++ b/fs/cifs/cifs_dfs_ref.c @@ -272,7 +272,7 @@ static struct vfsmount *cifs_dfs_do_automount(struct dentry *mntpt) struct dfs_info3_param *referrals = NULL; unsigned int num_referrals = 0; struct cifs_sb_info *cifs_sb; - struct cifsSesInfo *ses; + struct cifs_ses *ses; char *full_path; int xid, i; int rc; diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c index 33d221394aca..2272fd5fe5b7 100644 --- a/fs/cifs/cifs_spnego.c +++ b/fs/cifs/cifs_spnego.c @@ -95,7 +95,7 @@ struct key_type cifs_spnego_key_type = { /* get a key struct with a SPNEGO security blob, suitable for session setup */ struct key * -cifs_get_spnego_key(struct cifsSesInfo *sesInfo) +cifs_get_spnego_key(struct cifs_ses *sesInfo) { struct TCP_Server_Info *server = sesInfo->server; struct sockaddr_in *sa = (struct sockaddr_in *) &server->dstaddr; diff --git a/fs/cifs/cifs_spnego.h b/fs/cifs/cifs_spnego.h index e4041ec4d712..31bef9ee078b 100644 --- a/fs/cifs/cifs_spnego.h +++ b/fs/cifs/cifs_spnego.h @@ -41,7 +41,7 @@ struct cifs_spnego_msg { #ifdef __KERNEL__ extern struct key_type cifs_spnego_key_type; -extern struct key *cifs_get_spnego_key(struct cifsSesInfo *sesInfo); +extern struct key *cifs_get_spnego_key(struct cifs_ses *sesInfo); #endif /* KERNEL */ #endif /* _CIFS_SPNEGO_H */ diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index f3c6fb9942ac..076b69ceef7f 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -945,7 +945,7 @@ static struct cifs_ntsd *get_cifs_acl_by_path(struct cifs_sb_info *cifs_sb, int oplock = 0; int xid, rc; __u16 fid; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; struct tcon_link *tlink = cifs_sb_tlink(cifs_sb); if (IS_ERR(tlink)) @@ -1013,7 +1013,7 @@ static int set_cifs_acl_by_path(struct cifs_sb_info *cifs_sb, const char *path, int oplock = 0; int xid, rc; __u16 fid; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; struct tcon_link *tlink = cifs_sb_tlink(cifs_sb); if (IS_ERR(tlink)) diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index 45c3f78c8f81..dfbd9f1f373d 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -229,7 +229,7 @@ int cifs_verify_signature(struct smb_hdr *cifs_pdu, } /* first calculate 24 bytes ntlm response and then 16 byte session key */ -int setup_ntlm_response(struct cifsSesInfo *ses) +int setup_ntlm_response(struct cifs_ses *ses) { int rc = 0; unsigned int temp_len = CIFS_SESS_KEY_SIZE + CIFS_AUTH_RESP_SIZE; @@ -312,7 +312,7 @@ int calc_lanman_hash(const char *password, const char *cryptkey, bool encrypt, * Allocate domain name which gets freed when session struct is deallocated. */ static int -build_avpair_blob(struct cifsSesInfo *ses, const struct nls_table *nls_cp) +build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp) { unsigned int dlen; unsigned int wlen; @@ -400,7 +400,7 @@ build_avpair_blob(struct cifsSesInfo *ses, const struct nls_table *nls_cp) * about target string i.e. for some, just user name might suffice. */ static int -find_domain_name(struct cifsSesInfo *ses, const struct nls_table *nls_cp) +find_domain_name(struct cifs_ses *ses, const struct nls_table *nls_cp) { unsigned int attrsize; unsigned int type; @@ -445,7 +445,7 @@ find_domain_name(struct cifsSesInfo *ses, const struct nls_table *nls_cp) return 0; } -static int calc_ntlmv2_hash(struct cifsSesInfo *ses, char *ntlmv2_hash, +static int calc_ntlmv2_hash(struct cifs_ses *ses, char *ntlmv2_hash, const struct nls_table *nls_cp) { int rc = 0; @@ -527,7 +527,7 @@ calc_exit_2: } static int -CalcNTLMv2_response(const struct cifsSesInfo *ses, char *ntlmv2_hash) +CalcNTLMv2_response(const struct cifs_ses *ses, char *ntlmv2_hash) { int rc; unsigned int offset = CIFS_SESS_KEY_SIZE + 8; @@ -563,7 +563,7 @@ CalcNTLMv2_response(const struct cifsSesInfo *ses, char *ntlmv2_hash) int -setup_ntlmv2_rsp(struct cifsSesInfo *ses, const struct nls_table *nls_cp) +setup_ntlmv2_rsp(struct cifs_ses *ses, const struct nls_table *nls_cp) { int rc; int baselen; @@ -649,7 +649,7 @@ setup_ntlmv2_rsp_ret: } int -calc_seckey(struct cifsSesInfo *ses) +calc_seckey(struct cifs_ses *ses) { int rc; struct crypto_blkcipher *tfm_arc4; diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 26981bf2cf3f..989442dcfb45 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -208,7 +208,7 @@ cifs_statfs(struct dentry *dentry, struct kstatfs *buf) { struct super_block *sb = dentry->d_sb; struct cifs_sb_info *cifs_sb = CIFS_SB(sb); - struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb); + struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb); int rc = -EOPNOTSUPP; int xid; @@ -361,7 +361,7 @@ static int cifs_show_options(struct seq_file *s, struct vfsmount *m) { struct cifs_sb_info *cifs_sb = CIFS_SB(m->mnt_sb); - struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb); + struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb); struct sockaddr *srcaddr; srcaddr = (struct sockaddr *)&tcon->ses->server->srcaddr; @@ -461,7 +461,7 @@ cifs_show_options(struct seq_file *s, struct vfsmount *m) static void cifs_umount_begin(struct super_block *sb) { struct cifs_sb_info *cifs_sb = CIFS_SB(sb); - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; if (cifs_sb == NULL) return; diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 310cddabd3fd..6255fa812c7a 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -254,7 +254,7 @@ struct TCP_Server_Info { struct mutex srv_mutex; struct task_struct *tsk; char server_GUID[16]; - char secMode; + char sec_mode; bool session_estab; /* mark when very first sess is established */ u16 dialect; /* dialect index that server chose */ enum securityEnum secType; @@ -329,7 +329,7 @@ static inline void cifs_set_net_ns(struct TCP_Server_Info *srv, struct net *net) /* * Session structure. One of these for each uid session with a particular host */ -struct cifsSesInfo { +struct cifs_ses { struct list_head smb_ses_list; struct list_head tcon_list; struct mutex session_mutex; @@ -369,11 +369,11 @@ struct cifsSesInfo { * there is one of these for each connection to a resource on a particular * session */ -struct cifsTconInfo { +struct cifs_tcon { struct list_head tcon_list; int tc_count; struct list_head openFileList; - struct cifsSesInfo *ses; /* pointer to session associated with */ + struct cifs_ses *ses; /* pointer to session associated with */ char treeName[MAX_TREE_SIZE + 1]; /* UNC name of resource in ASCII */ char *nativeFileSystem; char *password; /* for share-level security */ @@ -455,12 +455,12 @@ struct tcon_link { #define TCON_LINK_IN_TREE 2 unsigned long tl_time; atomic_t tl_count; - struct cifsTconInfo *tl_tcon; + struct cifs_tcon *tl_tcon; }; extern struct tcon_link *cifs_sb_tlink(struct cifs_sb_info *cifs_sb); -static inline struct cifsTconInfo * +static inline struct cifs_tcon * tlink_tcon(struct tcon_link *tlink) { return tlink->tl_tcon; @@ -477,7 +477,7 @@ cifs_get_tlink(struct tcon_link *tlink) } /* This function is always expected to succeed */ -extern struct cifsTconInfo *cifs_sb_master_tcon(struct cifs_sb_info *cifs_sb); +extern struct cifs_tcon *cifs_sb_master_tcon(struct cifs_sb_info *cifs_sb); /* * This info hangs off the cifsFileInfo structure, pointed to by llist. @@ -535,7 +535,7 @@ struct cifs_io_parms { __u32 pid; __u64 offset; unsigned int length; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; }; /* @@ -615,7 +615,7 @@ convert_delimiter(char *path, char delim) #ifdef CONFIG_CIFS_STATS #define cifs_stats_inc atomic_inc -static inline void cifs_stats_bytes_written(struct cifsTconInfo *tcon, +static inline void cifs_stats_bytes_written(struct cifs_tcon *tcon, unsigned int bytes) { if (bytes) { @@ -625,7 +625,7 @@ static inline void cifs_stats_bytes_written(struct cifsTconInfo *tcon, } } -static inline void cifs_stats_bytes_read(struct cifsTconInfo *tcon, +static inline void cifs_stats_bytes_read(struct cifs_tcon *tcon, unsigned int bytes) { spin_lock(&tcon->stat_lock); @@ -675,7 +675,7 @@ struct mid_q_entry { struct oplock_q_entry { struct list_head qhead; struct inode *pinode; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; __u16 netfid; }; diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index 17063455918f..953f84413c77 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -59,7 +59,7 @@ extern void cifs_destroy_idmaptrees(void); extern char *build_path_from_dentry(struct dentry *); extern char *cifs_build_path_to_root(struct smb_vol *vol, struct cifs_sb_info *cifs_sb, - struct cifsTconInfo *tcon); + struct cifs_tcon *tcon); extern char *build_wildcard_path_from_dentry(struct dentry *direntry); extern char *cifs_compose_mount_options(const char *sb_mountdata, const char *fullpath, const struct dfs_info3_param *ref, @@ -71,19 +71,19 @@ extern void DeleteMidQEntry(struct mid_q_entry *midEntry); extern int cifs_call_async(struct TCP_Server_Info *server, struct kvec *iov, unsigned int nvec, mid_callback_t *callback, void *cbdata, bool ignore_pend); -extern int SendReceive(const unsigned int /* xid */ , struct cifsSesInfo *, +extern int SendReceive(const unsigned int /* xid */ , struct cifs_ses *, struct smb_hdr * /* input */ , struct smb_hdr * /* out */ , int * /* bytes returned */ , const int long_op); -extern int SendReceiveNoRsp(const unsigned int xid, struct cifsSesInfo *ses, +extern int SendReceiveNoRsp(const unsigned int xid, struct cifs_ses *ses, struct smb_hdr *in_buf, int flags); extern int cifs_check_receive(struct mid_q_entry *mid, struct TCP_Server_Info *server, bool log_error); -extern int SendReceive2(const unsigned int /* xid */ , struct cifsSesInfo *, +extern int SendReceive2(const unsigned int /* xid */ , struct cifs_ses *, struct kvec *, int /* nvec to send */, int * /* type of buf returned */ , const int flags); extern int SendReceiveBlockingLock(const unsigned int xid, - struct cifsTconInfo *ptcon, + struct cifs_tcon *ptcon, struct smb_hdr *in_buf , struct smb_hdr *out_buf, int *bytes_returned); @@ -104,12 +104,12 @@ extern int cifs_fill_sockaddr(struct sockaddr *dst, const char *src, int len, const unsigned short int port); extern int map_smb_to_linux_error(struct smb_hdr *smb, bool logErr); extern void header_assemble(struct smb_hdr *, char /* command */ , - const struct cifsTconInfo *, int /* length of + const struct cifs_tcon *, int /* length of fixed section (word count) in two byte units */); extern int small_smb_init_no_tc(const int smb_cmd, const int wct, - struct cifsSesInfo *ses, + struct cifs_ses *ses, void **request_buf); -extern int CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, +extern int CIFS_SessSetup(unsigned int xid, struct cifs_ses *ses, const struct nls_table *nls_cp); extern __u16 GetNextMid(struct TCP_Server_Info *server); extern struct timespec cifs_NTtimeToUnix(__le64 utc_nanoseconds_since_1601); @@ -165,94 +165,94 @@ void cifs_proc_init(void); void cifs_proc_clean(void); extern int cifs_negotiate_protocol(unsigned int xid, - struct cifsSesInfo *ses); -extern int cifs_setup_session(unsigned int xid, struct cifsSesInfo *ses, + struct cifs_ses *ses); +extern int cifs_setup_session(unsigned int xid, struct cifs_ses *ses, struct nls_table *nls_info); -extern int CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses); +extern int CIFSSMBNegotiate(unsigned int xid, struct cifs_ses *ses); -extern int CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, - const char *tree, struct cifsTconInfo *tcon, +extern int CIFSTCon(unsigned int xid, struct cifs_ses *ses, + const char *tree, struct cifs_tcon *tcon, const struct nls_table *); -extern int CIFSFindFirst(const int xid, struct cifsTconInfo *tcon, +extern int CIFSFindFirst(const int xid, struct cifs_tcon *tcon, const char *searchName, const struct nls_table *nls_codepage, __u16 *searchHandle, struct cifs_search_info *psrch_inf, int map, const char dirsep); -extern int CIFSFindNext(const int xid, struct cifsTconInfo *tcon, +extern int CIFSFindNext(const int xid, struct cifs_tcon *tcon, __u16 searchHandle, struct cifs_search_info *psrch_inf); -extern int CIFSFindClose(const int, struct cifsTconInfo *tcon, +extern int CIFSFindClose(const int, struct cifs_tcon *tcon, const __u16 search_handle); -extern int CIFSSMBQFileInfo(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBQFileInfo(const int xid, struct cifs_tcon *tcon, u16 netfid, FILE_ALL_INFO *pFindData); -extern int CIFSSMBQPathInfo(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBQPathInfo(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, FILE_ALL_INFO *findData, int legacy /* whether to use old info level */, const struct nls_table *nls_codepage, int remap); -extern int SMBQueryInformation(const int xid, struct cifsTconInfo *tcon, +extern int SMBQueryInformation(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, FILE_ALL_INFO *findData, const struct nls_table *nls_codepage, int remap); -extern int CIFSSMBUnixQFileInfo(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBUnixQFileInfo(const int xid, struct cifs_tcon *tcon, u16 netfid, FILE_UNIX_BASIC_INFO *pFindData); extern int CIFSSMBUnixQPathInfo(const int xid, - struct cifsTconInfo *tcon, + struct cifs_tcon *tcon, const unsigned char *searchName, FILE_UNIX_BASIC_INFO *pFindData, const struct nls_table *nls_codepage, int remap); -extern int CIFSGetDFSRefer(const int xid, struct cifsSesInfo *ses, +extern int CIFSGetDFSRefer(const int xid, struct cifs_ses *ses, const unsigned char *searchName, struct dfs_info3_param **target_nodes, unsigned int *number_of_nodes_in_array, const struct nls_table *nls_codepage, int remap); -extern int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, +extern int get_dfs_path(int xid, struct cifs_ses *pSesInfo, const char *old_path, const struct nls_table *nls_codepage, unsigned int *pnum_referrals, struct dfs_info3_param **preferrals, int remap); -extern void reset_cifs_unix_caps(int xid, struct cifsTconInfo *tcon, +extern void reset_cifs_unix_caps(int xid, struct cifs_tcon *tcon, struct super_block *sb, struct smb_vol *vol); -extern int CIFSSMBQFSInfo(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBQFSInfo(const int xid, struct cifs_tcon *tcon, struct kstatfs *FSData); -extern int SMBOldQFSInfo(const int xid, struct cifsTconInfo *tcon, +extern int SMBOldQFSInfo(const int xid, struct cifs_tcon *tcon, struct kstatfs *FSData); -extern int CIFSSMBSetFSUnixInfo(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetFSUnixInfo(const int xid, struct cifs_tcon *tcon, __u64 cap); extern int CIFSSMBQFSAttributeInfo(const int xid, - struct cifsTconInfo *tcon); -extern int CIFSSMBQFSDeviceInfo(const int xid, struct cifsTconInfo *tcon); -extern int CIFSSMBQFSUnixInfo(const int xid, struct cifsTconInfo *tcon); -extern int CIFSSMBQFSPosixInfo(const int xid, struct cifsTconInfo *tcon, + struct cifs_tcon *tcon); +extern int CIFSSMBQFSDeviceInfo(const int xid, struct cifs_tcon *tcon); +extern int CIFSSMBQFSUnixInfo(const int xid, struct cifs_tcon *tcon); +extern int CIFSSMBQFSPosixInfo(const int xid, struct cifs_tcon *tcon, struct kstatfs *FSData); -extern int CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetPathInfo(const int xid, struct cifs_tcon *tcon, const char *fileName, const FILE_BASIC_INFO *data, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetFileInfo(const int xid, struct cifs_tcon *tcon, const FILE_BASIC_INFO *data, __u16 fid, __u32 pid_of_opener); -extern int CIFSSMBSetFileDisposition(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetFileDisposition(const int xid, struct cifs_tcon *tcon, bool delete_file, __u16 fid, __u32 pid_of_opener); #if 0 -extern int CIFSSMBSetAttrLegacy(int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetAttrLegacy(int xid, struct cifs_tcon *tcon, char *fileName, __u16 dos_attributes, const struct nls_table *nls_codepage); #endif /* possibly unneeded function */ -extern int CIFSSMBSetEOF(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetEOF(const int xid, struct cifs_tcon *tcon, const char *fileName, __u64 size, bool setAllocationSizeFlag, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetFileSize(const int xid, struct cifs_tcon *tcon, __u64 size, __u16 fileHandle, __u32 opener_pid, bool AllocSizeFlag); @@ -266,83 +266,83 @@ struct cifs_unix_set_info_args { dev_t device; }; -extern int CIFSSMBUnixSetFileInfo(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBUnixSetFileInfo(const int xid, struct cifs_tcon *tcon, const struct cifs_unix_set_info_args *args, u16 fid, u32 pid_of_opener); -extern int CIFSSMBUnixSetPathInfo(const int xid, struct cifsTconInfo *pTcon, +extern int CIFSSMBUnixSetPathInfo(const int xid, struct cifs_tcon *pTcon, char *fileName, const struct cifs_unix_set_info_args *args, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBMkDir(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBMkDir(const int xid, struct cifs_tcon *tcon, const char *newName, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBRmDir(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBRmDir(const int xid, struct cifs_tcon *tcon, const char *name, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSPOSIXDelFile(const int xid, struct cifsTconInfo *tcon, +extern int CIFSPOSIXDelFile(const int xid, struct cifs_tcon *tcon, const char *name, __u16 type, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBDelFile(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBDelFile(const int xid, struct cifs_tcon *tcon, const char *name, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBRename(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBRename(const int xid, struct cifs_tcon *tcon, const char *fromName, const char *toName, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBRenameOpenFile(const int xid, struct cifsTconInfo *pTcon, +extern int CIFSSMBRenameOpenFile(const int xid, struct cifs_tcon *pTcon, int netfid, const char *target_name, const struct nls_table *nls_codepage, int remap_special_chars); extern int CIFSCreateHardLink(const int xid, - struct cifsTconInfo *tcon, + struct cifs_tcon *tcon, const char *fromName, const char *toName, const struct nls_table *nls_codepage, int remap_special_chars); extern int CIFSUnixCreateHardLink(const int xid, - struct cifsTconInfo *tcon, + struct cifs_tcon *tcon, const char *fromName, const char *toName, const struct nls_table *nls_codepage, int remap_special_chars); extern int CIFSUnixCreateSymLink(const int xid, - struct cifsTconInfo *tcon, + struct cifs_tcon *tcon, const char *fromName, const char *toName, const struct nls_table *nls_codepage); extern int CIFSSMBUnixQuerySymLink(const int xid, - struct cifsTconInfo *tcon, + struct cifs_tcon *tcon, const unsigned char *searchName, char **syminfo, const struct nls_table *nls_codepage); #ifdef CONFIG_CIFS_SYMLINK_EXPERIMENTAL extern int CIFSSMBQueryReparseLinkInfo(const int xid, - struct cifsTconInfo *tcon, + struct cifs_tcon *tcon, const unsigned char *searchName, char *symlinkinfo, const int buflen, __u16 fid, const struct nls_table *nls_codepage); #endif /* temporarily unused until cifs_symlink fixed */ -extern int CIFSSMBOpen(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBOpen(const int xid, struct cifs_tcon *tcon, const char *fileName, const int disposition, const int access_flags, const int omode, __u16 *netfid, int *pOplock, FILE_ALL_INFO *, const struct nls_table *nls_codepage, int remap); -extern int SMBLegacyOpen(const int xid, struct cifsTconInfo *tcon, +extern int SMBLegacyOpen(const int xid, struct cifs_tcon *tcon, const char *fileName, const int disposition, const int access_flags, const int omode, __u16 *netfid, int *pOplock, FILE_ALL_INFO *, const struct nls_table *nls_codepage, int remap); -extern int CIFSPOSIXCreate(const int xid, struct cifsTconInfo *tcon, +extern int CIFSPOSIXCreate(const int xid, struct cifs_tcon *tcon, u32 posix_flags, __u64 mode, __u16 *netfid, FILE_UNIX_BASIC_INFO *pRetData, __u32 *pOplock, const char *name, const struct nls_table *nls_codepage, int remap); -extern int CIFSSMBClose(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBClose(const int xid, struct cifs_tcon *tcon, const int smb_file_id); -extern int CIFSSMBFlush(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBFlush(const int xid, struct cifs_tcon *tcon, const int smb_file_id); extern int CIFSSMBRead(const int xid, struct cifs_io_parms *io_parms, @@ -354,28 +354,28 @@ extern int CIFSSMBWrite(const int xid, struct cifs_io_parms *io_parms, extern int CIFSSMBWrite2(const int xid, struct cifs_io_parms *io_parms, unsigned int *nbytes, struct kvec *iov, const int nvec, const int long_op); -extern int CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon, +extern int CIFSGetSrvInodeNumber(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, __u64 *inode_number, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBLock(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBLock(const int xid, struct cifs_tcon *tcon, const __u16 netfid, const __u64 len, const __u64 offset, const __u32 numUnlock, const __u32 numLock, const __u8 lockType, const bool waitFlag, const __u8 oplock_level); -extern int CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBPosixLock(const int xid, struct cifs_tcon *tcon, const __u16 smb_file_id, const int get_flag, const __u64 len, struct file_lock *, const __u16 lock_type, const bool waitFlag); -extern int CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon); +extern int CIFSSMBTDis(const int xid, struct cifs_tcon *tcon); extern int CIFSSMBEcho(struct TCP_Server_Info *server); -extern int CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses); +extern int CIFSSMBLogoff(const int xid, struct cifs_ses *ses); -extern struct cifsSesInfo *sesInfoAlloc(void); -extern void sesInfoFree(struct cifsSesInfo *); -extern struct cifsTconInfo *tconInfoAlloc(void); -extern void tconInfoFree(struct cifsTconInfo *); +extern struct cifs_ses *sesInfoAlloc(void); +extern void sesInfoFree(struct cifs_ses *); +extern struct cifs_tcon *tconInfoAlloc(void); +extern void tconInfoFree(struct cifs_tcon *); extern int cifs_sign_smb(struct smb_hdr *, struct TCP_Server_Info *, __u32 *); extern int cifs_sign_smb2(struct kvec *iov, int n_vec, struct TCP_Server_Info *, @@ -384,51 +384,51 @@ extern int cifs_verify_signature(struct smb_hdr *, struct TCP_Server_Info *server, __u32 expected_sequence_number); extern int SMBNTencrypt(unsigned char *, unsigned char *, unsigned char *); -extern int setup_ntlm_response(struct cifsSesInfo *); -extern int setup_ntlmv2_rsp(struct cifsSesInfo *, const struct nls_table *); +extern int setup_ntlm_response(struct cifs_ses *); +extern int setup_ntlmv2_rsp(struct cifs_ses *, const struct nls_table *); extern int cifs_crypto_shash_allocate(struct TCP_Server_Info *); extern void cifs_crypto_shash_release(struct TCP_Server_Info *); -extern int calc_seckey(struct cifsSesInfo *); +extern int calc_seckey(struct cifs_ses *); #ifdef CONFIG_CIFS_WEAK_PW_HASH extern int calc_lanman_hash(const char *password, const char *cryptkey, bool encrypt, char *lnm_session_key); #endif /* CIFS_WEAK_PW_HASH */ #ifdef CONFIG_CIFS_DNOTIFY_EXPERIMENTAL /* unused temporarily */ -extern int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBNotify(const int xid, struct cifs_tcon *tcon, const int notify_subdirs, const __u16 netfid, __u32 filter, struct file *file, int multishot, const struct nls_table *nls_codepage); #endif /* was needed for dnotify, and will be needed for inotify when VFS fix */ extern int CIFSSMBCopy(int xid, - struct cifsTconInfo *source_tcon, + struct cifs_tcon *source_tcon, const char *fromName, const __u16 target_tid, const char *toName, const int flags, const struct nls_table *nls_codepage, int remap_special_chars); -extern ssize_t CIFSSMBQAllEAs(const int xid, struct cifsTconInfo *tcon, +extern ssize_t CIFSSMBQAllEAs(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, const unsigned char *ea_name, char *EAData, size_t bufsize, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBSetEA(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetEA(const int xid, struct cifs_tcon *tcon, const char *fileName, const char *ea_name, const void *ea_value, const __u16 ea_value_len, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBGetCIFSACL(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBGetCIFSACL(const int xid, struct cifs_tcon *tcon, __u16 fid, struct cifs_ntsd **acl_inf, __u32 *buflen); -extern int CIFSSMBSetCIFSACL(const int, struct cifsTconInfo *, __u16, +extern int CIFSSMBSetCIFSACL(const int, struct cifs_tcon *, __u16, struct cifs_ntsd *, __u32); -extern int CIFSSMBGetPosixACL(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBGetPosixACL(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, char *acl_inf, const int buflen, const int acl_type, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSSMBSetPosixACL(const int xid, struct cifsTconInfo *tcon, +extern int CIFSSMBSetPosixACL(const int xid, struct cifs_tcon *tcon, const unsigned char *fileName, const char *local_acl, const int buflen, const int acl_type, const struct nls_table *nls_codepage, int remap_special_chars); -extern int CIFSGetExtAttr(const int xid, struct cifsTconInfo *tcon, +extern int CIFSGetExtAttr(const int xid, struct cifs_tcon *tcon, const int netfid, __u64 *pExtAttrBits, __u64 *pMask); extern void cifs_autodisable_serverino(struct cifs_sb_info *cifs_sb); extern bool CIFSCouldBeMFSymlink(const struct cifs_fattr *fattr); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index fc9b5fa98efd..1a9fe7f816d1 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -85,7 +85,7 @@ static struct { /* Mark as invalid, all open files on tree connections since they were closed when session to server was lost */ -static void mark_open_files_invalid(struct cifsTconInfo *pTcon) +static void mark_open_files_invalid(struct cifs_tcon *pTcon) { struct cifsFileInfo *open_file = NULL; struct list_head *tmp; @@ -105,10 +105,10 @@ static void mark_open_files_invalid(struct cifsTconInfo *pTcon) /* reconnect the socket, tcon, and smb session if needed */ static int -cifs_reconnect_tcon(struct cifsTconInfo *tcon, int smb_command) +cifs_reconnect_tcon(struct cifs_tcon *tcon, int smb_command) { int rc = 0; - struct cifsSesInfo *ses; + struct cifs_ses *ses; struct TCP_Server_Info *server; struct nls_table *nls_codepage; @@ -227,7 +227,7 @@ out: SMB information in the SMB header. If the return code is zero, this function must have filled in request_buf pointer */ static int -small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, +small_smb_init(int smb_command, int wct, struct cifs_tcon *tcon, void **request_buf) { int rc; @@ -253,7 +253,7 @@ small_smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, int small_smb_init_no_tc(const int smb_command, const int wct, - struct cifsSesInfo *ses, void **request_buf) + struct cifs_ses *ses, void **request_buf) { int rc; struct smb_hdr *buffer; @@ -279,7 +279,7 @@ small_smb_init_no_tc(const int smb_command, const int wct, /* If the return code is zero, this function must fill in request_buf pointer */ static int -__smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, +__smb_init(int smb_command, int wct, struct cifs_tcon *tcon, void **request_buf, void **response_buf) { *request_buf = cifs_buf_get(); @@ -305,7 +305,7 @@ __smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, /* If the return code is zero, this function must fill in request_buf pointer */ static int -smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, +smb_init(int smb_command, int wct, struct cifs_tcon *tcon, void **request_buf, void **response_buf) { int rc; @@ -318,7 +318,7 @@ smb_init(int smb_command, int wct, struct cifsTconInfo *tcon, } static int -smb_init_no_reconnect(int smb_command, int wct, struct cifsTconInfo *tcon, +smb_init_no_reconnect(int smb_command, int wct, struct cifs_tcon *tcon, void **request_buf, void **response_buf) { if (tcon->ses->need_reconnect || tcon->need_reconnect) @@ -367,7 +367,7 @@ static inline void inc_rfc1001_len(void *pSMB, int count) } int -CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) +CIFSSMBNegotiate(unsigned int xid, struct cifs_ses *ses) { NEGOTIATE_REQ *pSMB; NEGOTIATE_RSP *pSMBr; @@ -451,7 +451,7 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) rc = -EOPNOTSUPP; goto neg_err_exit; } - server->secMode = (__u8)le16_to_cpu(rsp->SecurityMode); + server->sec_mode = (__u8)le16_to_cpu(rsp->SecurityMode); server->maxReq = le16_to_cpu(rsp->MaxMpxCount); server->maxBuf = min((__u32)le16_to_cpu(rsp->MaxBufSize), (__u32)CIFSMaxBufSize + MAX_CIFS_HDR_SIZE); @@ -505,7 +505,7 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) cpu_to_le16(CIFS_CRYPTO_KEY_SIZE)) { memcpy(ses->server->cryptkey, rsp->EncryptionKey, CIFS_CRYPTO_KEY_SIZE); - } else if (server->secMode & SECMODE_PW_ENCRYPT) { + } else if (server->sec_mode & SECMODE_PW_ENCRYPT) { rc = -EIO; /* need cryptkey unless plain text */ goto neg_err_exit; } @@ -527,11 +527,11 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) goto neg_err_exit; } /* else wct == 17 NTLM */ - server->secMode = pSMBr->SecurityMode; - if ((server->secMode & SECMODE_USER) == 0) + server->sec_mode = pSMBr->SecurityMode; + if ((server->sec_mode & SECMODE_USER) == 0) cFYI(1, "share mode security"); - if ((server->secMode & SECMODE_PW_ENCRYPT) == 0) + if ((server->sec_mode & SECMODE_PW_ENCRYPT) == 0) #ifdef CONFIG_CIFS_WEAK_PW_HASH if ((secFlags & CIFSSEC_MAY_PLNTXT) == 0) #endif /* CIFS_WEAK_PW_HASH */ @@ -617,7 +617,7 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses) } else rc = -EOPNOTSUPP; } - } else if (server->secMode & SECMODE_PW_ENCRYPT) { + } else if (server->sec_mode & SECMODE_PW_ENCRYPT) { rc = -EIO; /* no crypt key only if plain text pwd */ goto neg_err_exit; } else @@ -630,27 +630,27 @@ signing_check: /* MUST_SIGN already includes the MAY_SIGN FLAG so if this is zero it means that signing is disabled */ cFYI(1, "Signing disabled"); - if (server->secMode & SECMODE_SIGN_REQUIRED) { + if (server->sec_mode & SECMODE_SIGN_REQUIRED) { cERROR(1, "Server requires " "packet signing to be enabled in " "/proc/fs/cifs/SecurityFlags."); rc = -EOPNOTSUPP; } - server->secMode &= + server->sec_mode &= ~(SECMODE_SIGN_ENABLED | SECMODE_SIGN_REQUIRED); } else if ((secFlags & CIFSSEC_MUST_SIGN) == CIFSSEC_MUST_SIGN) { /* signing required */ cFYI(1, "Must sign - secFlags 0x%x", secFlags); - if ((server->secMode & + if ((server->sec_mode & (SECMODE_SIGN_ENABLED | SECMODE_SIGN_REQUIRED)) == 0) { cERROR(1, "signing required but server lacks support"); rc = -EOPNOTSUPP; } else - server->secMode |= SECMODE_SIGN_REQUIRED; + server->sec_mode |= SECMODE_SIGN_REQUIRED; } else { /* signing optional ie CIFSSEC_MAY_SIGN */ - if ((server->secMode & SECMODE_SIGN_REQUIRED) == 0) - server->secMode &= + if ((server->sec_mode & SECMODE_SIGN_REQUIRED) == 0) + server->sec_mode &= ~(SECMODE_SIGN_ENABLED | SECMODE_SIGN_REQUIRED); } @@ -662,7 +662,7 @@ neg_err_exit: } int -CIFSSMBTDis(const int xid, struct cifsTconInfo *tcon) +CIFSSMBTDis(const int xid, struct cifs_tcon *tcon) { struct smb_hdr *smb_buffer; int rc = 0; @@ -749,7 +749,7 @@ CIFSSMBEcho(struct TCP_Server_Info *server) } int -CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) +CIFSSMBLogoff(const int xid, struct cifs_ses *ses) { LOGOFF_ANDX_REQ *pSMB; int rc = 0; @@ -776,7 +776,7 @@ CIFSSMBLogoff(const int xid, struct cifsSesInfo *ses) pSMB->hdr.Mid = GetNextMid(ses->server); - if (ses->server->secMode & + if (ses->server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) pSMB->hdr.Flags2 |= SMBFLG2_SECURITY_SIGNATURE; @@ -796,7 +796,7 @@ session_already_dead: } int -CIFSPOSIXDelFile(const int xid, struct cifsTconInfo *tcon, const char *fileName, +CIFSPOSIXDelFile(const int xid, struct cifs_tcon *tcon, const char *fileName, __u16 type, const struct nls_table *nls_codepage, int remap) { TRANSACTION2_SPI_REQ *pSMB = NULL; @@ -871,7 +871,7 @@ PsxDelete: } int -CIFSSMBDelFile(const int xid, struct cifsTconInfo *tcon, const char *fileName, +CIFSSMBDelFile(const int xid, struct cifs_tcon *tcon, const char *fileName, const struct nls_table *nls_codepage, int remap) { DELETE_FILE_REQ *pSMB = NULL; @@ -916,7 +916,7 @@ DelFileRetry: } int -CIFSSMBRmDir(const int xid, struct cifsTconInfo *tcon, const char *dirName, +CIFSSMBRmDir(const int xid, struct cifs_tcon *tcon, const char *dirName, const struct nls_table *nls_codepage, int remap) { DELETE_DIRECTORY_REQ *pSMB = NULL; @@ -959,7 +959,7 @@ RmDirRetry: } int -CIFSSMBMkDir(const int xid, struct cifsTconInfo *tcon, +CIFSSMBMkDir(const int xid, struct cifs_tcon *tcon, const char *name, const struct nls_table *nls_codepage, int remap) { int rc = 0; @@ -1002,7 +1002,7 @@ MkDirRetry: } int -CIFSPOSIXCreate(const int xid, struct cifsTconInfo *tcon, __u32 posix_flags, +CIFSPOSIXCreate(const int xid, struct cifs_tcon *tcon, __u32 posix_flags, __u64 mode, __u16 *netfid, FILE_UNIX_BASIC_INFO *pRetData, __u32 *pOplock, const char *name, const struct nls_table *nls_codepage, int remap) @@ -1168,7 +1168,7 @@ access_flags_to_smbopen_mode(const int access_flags) } int -SMBLegacyOpen(const int xid, struct cifsTconInfo *tcon, +SMBLegacyOpen(const int xid, struct cifs_tcon *tcon, const char *fileName, const int openDisposition, const int access_flags, const int create_options, __u16 *netfid, int *pOplock, FILE_ALL_INFO *pfile_info, @@ -1275,7 +1275,7 @@ OldOpenRetry: } int -CIFSSMBOpen(const int xid, struct cifsTconInfo *tcon, +CIFSSMBOpen(const int xid, struct cifs_tcon *tcon, const char *fileName, const int openDisposition, const int access_flags, const int create_options, __u16 *netfid, int *pOplock, FILE_ALL_INFO *pfile_info, @@ -1390,7 +1390,7 @@ CIFSSMBRead(const int xid, struct cifs_io_parms *io_parms, unsigned int *nbytes, __u32 pid = io_parms->pid; __u16 netfid = io_parms->netfid; __u64 offset = io_parms->offset; - struct cifsTconInfo *tcon = io_parms->tcon; + struct cifs_tcon *tcon = io_parms->tcon; unsigned int count = io_parms->length; cFYI(1, "Reading %d bytes on fid %d", count, netfid); @@ -1502,7 +1502,7 @@ CIFSSMBWrite(const int xid, struct cifs_io_parms *io_parms, __u32 pid = io_parms->pid; __u16 netfid = io_parms->netfid; __u64 offset = io_parms->offset; - struct cifsTconInfo *tcon = io_parms->tcon; + struct cifs_tcon *tcon = io_parms->tcon; unsigned int count = io_parms->length; *nbytes = 0; @@ -1714,7 +1714,7 @@ static void cifs_writev_callback(struct mid_q_entry *mid) { struct cifs_writedata *wdata = mid->callback_data; - struct cifsTconInfo *tcon = tlink_tcon(wdata->cfile->tlink); + struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink); unsigned int written; WRITE_RSP *smb = (WRITE_RSP *)mid->resp_buf; @@ -1763,7 +1763,7 @@ cifs_async_writev(struct cifs_writedata *wdata) int i, rc = -EACCES; WRITE_REQ *smb = NULL; int wct; - struct cifsTconInfo *tcon = tlink_tcon(wdata->cfile->tlink); + struct cifs_tcon *tcon = tlink_tcon(wdata->cfile->tlink); struct inode *inode = wdata->cfile->dentry->d_inode; struct kvec *iov = NULL; @@ -1866,7 +1866,7 @@ CIFSSMBWrite2(const int xid, struct cifs_io_parms *io_parms, __u32 pid = io_parms->pid; __u16 netfid = io_parms->netfid; __u64 offset = io_parms->offset; - struct cifsTconInfo *tcon = io_parms->tcon; + struct cifs_tcon *tcon = io_parms->tcon; unsigned int count = io_parms->length; *nbytes = 0; @@ -1964,7 +1964,7 @@ CIFSSMBWrite2(const int xid, struct cifs_io_parms *io_parms, int -CIFSSMBLock(const int xid, struct cifsTconInfo *tcon, +CIFSSMBLock(const int xid, struct cifs_tcon *tcon, const __u16 smb_file_id, const __u64 len, const __u64 offset, const __u32 numUnlock, const __u32 numLock, const __u8 lockType, @@ -2034,7 +2034,7 @@ CIFSSMBLock(const int xid, struct cifsTconInfo *tcon, } int -CIFSSMBPosixLock(const int xid, struct cifsTconInfo *tcon, +CIFSSMBPosixLock(const int xid, struct cifs_tcon *tcon, const __u16 smb_file_id, const int get_flag, const __u64 len, struct file_lock *pLockData, const __u16 lock_type, const bool waitFlag) @@ -2172,7 +2172,7 @@ plk_err_exit: int -CIFSSMBClose(const int xid, struct cifsTconInfo *tcon, int smb_file_id) +CIFSSMBClose(const int xid, struct cifs_tcon *tcon, int smb_file_id) { int rc = 0; CLOSE_REQ *pSMB = NULL; @@ -2205,7 +2205,7 @@ CIFSSMBClose(const int xid, struct cifsTconInfo *tcon, int smb_file_id) } int -CIFSSMBFlush(const int xid, struct cifsTconInfo *tcon, int smb_file_id) +CIFSSMBFlush(const int xid, struct cifs_tcon *tcon, int smb_file_id) { int rc = 0; FLUSH_REQ *pSMB = NULL; @@ -2226,7 +2226,7 @@ CIFSSMBFlush(const int xid, struct cifsTconInfo *tcon, int smb_file_id) } int -CIFSSMBRename(const int xid, struct cifsTconInfo *tcon, +CIFSSMBRename(const int xid, struct cifs_tcon *tcon, const char *fromName, const char *toName, const struct nls_table *nls_codepage, int remap) { @@ -2293,7 +2293,7 @@ renameRetry: return rc; } -int CIFSSMBRenameOpenFile(const int xid, struct cifsTconInfo *pTcon, +int CIFSSMBRenameOpenFile(const int xid, struct cifs_tcon *pTcon, int netfid, const char *target_name, const struct nls_table *nls_codepage, int remap) { @@ -2373,7 +2373,7 @@ int CIFSSMBRenameOpenFile(const int xid, struct cifsTconInfo *pTcon, } int -CIFSSMBCopy(const int xid, struct cifsTconInfo *tcon, const char *fromName, +CIFSSMBCopy(const int xid, struct cifs_tcon *tcon, const char *fromName, const __u16 target_tid, const char *toName, const int flags, const struct nls_table *nls_codepage, int remap) { @@ -2441,7 +2441,7 @@ copyRetry: } int -CIFSUnixCreateSymLink(const int xid, struct cifsTconInfo *tcon, +CIFSUnixCreateSymLink(const int xid, struct cifs_tcon *tcon, const char *fromName, const char *toName, const struct nls_table *nls_codepage) { @@ -2530,7 +2530,7 @@ createSymLinkRetry: } int -CIFSUnixCreateHardLink(const int xid, struct cifsTconInfo *tcon, +CIFSUnixCreateHardLink(const int xid, struct cifs_tcon *tcon, const char *fromName, const char *toName, const struct nls_table *nls_codepage, int remap) { @@ -2615,7 +2615,7 @@ createHardLinkRetry: } int -CIFSCreateHardLink(const int xid, struct cifsTconInfo *tcon, +CIFSCreateHardLink(const int xid, struct cifs_tcon *tcon, const char *fromName, const char *toName, const struct nls_table *nls_codepage, int remap) { @@ -2687,7 +2687,7 @@ winCreateHardLinkRetry: } int -CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon, +CIFSSMBUnixQuerySymLink(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, char **symlinkinfo, const struct nls_table *nls_codepage) { @@ -2792,7 +2792,7 @@ querySymLinkRetry: * it is not compiled in by default until callers fixed up and more tested. */ int -CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon, +CIFSSMBQueryReparseLinkInfo(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, char *symlinkinfo, const int buflen, __u16 fid, const struct nls_table *nls_codepage) @@ -3030,7 +3030,7 @@ static __u16 ACL_to_cifs_posix(char *parm_data, const char *pACL, } int -CIFSSMBGetPosixACL(const int xid, struct cifsTconInfo *tcon, +CIFSSMBGetPosixACL(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, char *acl_inf, const int buflen, const int acl_type, const struct nls_table *nls_codepage, int remap) @@ -3118,7 +3118,7 @@ queryAclRetry: } int -CIFSSMBSetPosixACL(const int xid, struct cifsTconInfo *tcon, +CIFSSMBSetPosixACL(const int xid, struct cifs_tcon *tcon, const unsigned char *fileName, const char *local_acl, const int buflen, const int acl_type, @@ -3198,7 +3198,7 @@ setACLerrorExit: /* BB fix tabs in this function FIXME BB */ int -CIFSGetExtAttr(const int xid, struct cifsTconInfo *tcon, +CIFSGetExtAttr(const int xid, struct cifs_tcon *tcon, const int netfid, __u64 *pExtAttrBits, __u64 *pMask) { int rc = 0; @@ -3291,7 +3291,7 @@ GetExtAttrOut: */ static int smb_init_nttransact(const __u16 sub_command, const int setup_count, - const int parm_len, struct cifsTconInfo *tcon, + const int parm_len, struct cifs_tcon *tcon, void **ret_buf) { int rc; @@ -3374,7 +3374,7 @@ validate_ntransact(char *buf, char **ppparm, char **ppdata, /* Get Security Descriptor (by handle) from remote server for a file or dir */ int -CIFSSMBGetCIFSACL(const int xid, struct cifsTconInfo *tcon, __u16 fid, +CIFSSMBGetCIFSACL(const int xid, struct cifs_tcon *tcon, __u16 fid, struct cifs_ntsd **acl_inf, __u32 *pbuflen) { int rc = 0; @@ -3466,7 +3466,7 @@ qsec_out: } int -CIFSSMBSetCIFSACL(const int xid, struct cifsTconInfo *tcon, __u16 fid, +CIFSSMBSetCIFSACL(const int xid, struct cifs_tcon *tcon, __u16 fid, struct cifs_ntsd *pntsd, __u32 acllen) { __u16 byte_count, param_count, data_count, param_offset, data_offset; @@ -3532,7 +3532,7 @@ setCifsAclRetry: /* Legacy Query Path Information call for lookup to old servers such as Win9x/WinME */ -int SMBQueryInformation(const int xid, struct cifsTconInfo *tcon, +int SMBQueryInformation(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, FILE_ALL_INFO *pFinfo, const struct nls_table *nls_codepage, int remap) @@ -3600,7 +3600,7 @@ QInfRetry: } int -CIFSSMBQFileInfo(const int xid, struct cifsTconInfo *tcon, +CIFSSMBQFileInfo(const int xid, struct cifs_tcon *tcon, u16 netfid, FILE_ALL_INFO *pFindData) { struct smb_t2_qfi_req *pSMB = NULL; @@ -3667,7 +3667,7 @@ QFileInfoRetry: } int -CIFSSMBQPathInfo(const int xid, struct cifsTconInfo *tcon, +CIFSSMBQPathInfo(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, FILE_ALL_INFO *pFindData, int legacy /* old style infolevel */, @@ -3768,7 +3768,7 @@ QPathInfoRetry: } int -CIFSSMBUnixQFileInfo(const int xid, struct cifsTconInfo *tcon, +CIFSSMBUnixQFileInfo(const int xid, struct cifs_tcon *tcon, u16 netfid, FILE_UNIX_BASIC_INFO *pFindData) { struct smb_t2_qfi_req *pSMB = NULL; @@ -3837,7 +3837,7 @@ UnixQFileInfoRetry: } int -CIFSSMBUnixQPathInfo(const int xid, struct cifsTconInfo *tcon, +CIFSSMBUnixQPathInfo(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, FILE_UNIX_BASIC_INFO *pFindData, const struct nls_table *nls_codepage, int remap) @@ -3923,7 +3923,7 @@ UnixQPathInfoRetry: /* xid, tcon, searchName and codepage are input parms, rest are returned */ int -CIFSFindFirst(const int xid, struct cifsTconInfo *tcon, +CIFSFindFirst(const int xid, struct cifs_tcon *tcon, const char *searchName, const struct nls_table *nls_codepage, __u16 *pnetfid, @@ -4071,7 +4071,7 @@ findFirstRetry: return rc; } -int CIFSFindNext(const int xid, struct cifsTconInfo *tcon, +int CIFSFindNext(const int xid, struct cifs_tcon *tcon, __u16 searchHandle, struct cifs_search_info *psrch_inf) { TRANSACTION2_FNEXT_REQ *pSMB = NULL; @@ -4209,7 +4209,7 @@ FNext2_err_exit: } int -CIFSFindClose(const int xid, struct cifsTconInfo *tcon, +CIFSFindClose(const int xid, struct cifs_tcon *tcon, const __u16 searchHandle) { int rc = 0; @@ -4241,7 +4241,7 @@ CIFSFindClose(const int xid, struct cifsTconInfo *tcon, } int -CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon, +CIFSGetSrvInodeNumber(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, __u64 *inode_number, const struct nls_table *nls_codepage, int remap) @@ -4443,7 +4443,7 @@ parse_DFS_referrals_exit: } int -CIFSGetDFSRefer(const int xid, struct cifsSesInfo *ses, +CIFSGetDFSRefer(const int xid, struct cifs_ses *ses, const unsigned char *searchName, struct dfs_info3_param **target_nodes, unsigned int *num_of_nodes, @@ -4492,7 +4492,7 @@ getDFSRetry: } if (ses->server) { - if (ses->server->secMode & + if (ses->server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) pSMB->hdr.Flags2 |= SMBFLG2_SECURITY_SIGNATURE; } @@ -4557,7 +4557,7 @@ GetDFSRefExit: /* Query File System Info such as free space to old servers such as Win 9x */ int -SMBOldQFSInfo(const int xid, struct cifsTconInfo *tcon, struct kstatfs *FSData) +SMBOldQFSInfo(const int xid, struct cifs_tcon *tcon, struct kstatfs *FSData) { /* level 0x01 SMB_QUERY_FILE_SYSTEM_INFO */ TRANSACTION2_QFSI_REQ *pSMB = NULL; @@ -4636,7 +4636,7 @@ oldQFSInfoRetry: } int -CIFSSMBQFSInfo(const int xid, struct cifsTconInfo *tcon, struct kstatfs *FSData) +CIFSSMBQFSInfo(const int xid, struct cifs_tcon *tcon, struct kstatfs *FSData) { /* level 0x103 SMB_QUERY_FILE_SYSTEM_INFO */ TRANSACTION2_QFSI_REQ *pSMB = NULL; @@ -4715,7 +4715,7 @@ QFSInfoRetry: } int -CIFSSMBQFSAttributeInfo(const int xid, struct cifsTconInfo *tcon) +CIFSSMBQFSAttributeInfo(const int xid, struct cifs_tcon *tcon) { /* level 0x105 SMB_QUERY_FILE_SYSTEM_INFO */ TRANSACTION2_QFSI_REQ *pSMB = NULL; @@ -4785,7 +4785,7 @@ QFSAttributeRetry: } int -CIFSSMBQFSDeviceInfo(const int xid, struct cifsTconInfo *tcon) +CIFSSMBQFSDeviceInfo(const int xid, struct cifs_tcon *tcon) { /* level 0x104 SMB_QUERY_FILE_SYSTEM_INFO */ TRANSACTION2_QFSI_REQ *pSMB = NULL; @@ -4856,7 +4856,7 @@ QFSDeviceRetry: } int -CIFSSMBQFSUnixInfo(const int xid, struct cifsTconInfo *tcon) +CIFSSMBQFSUnixInfo(const int xid, struct cifs_tcon *tcon) { /* level 0x200 SMB_QUERY_CIFS_UNIX_INFO */ TRANSACTION2_QFSI_REQ *pSMB = NULL; @@ -4926,7 +4926,7 @@ QFSUnixRetry: } int -CIFSSMBSetFSUnixInfo(const int xid, struct cifsTconInfo *tcon, __u64 cap) +CIFSSMBSetFSUnixInfo(const int xid, struct cifs_tcon *tcon, __u64 cap) { /* level 0x200 SMB_SET_CIFS_UNIX_INFO */ TRANSACTION2_SETFSI_REQ *pSMB = NULL; @@ -5000,7 +5000,7 @@ SETFSUnixRetry: int -CIFSSMBQFSPosixInfo(const int xid, struct cifsTconInfo *tcon, +CIFSSMBQFSPosixInfo(const int xid, struct cifs_tcon *tcon, struct kstatfs *FSData) { /* level 0x201 SMB_QUERY_CIFS_POSIX_INFO */ @@ -5093,7 +5093,7 @@ QFSPosixRetry: in Samba which this routine can run into */ int -CIFSSMBSetEOF(const int xid, struct cifsTconInfo *tcon, const char *fileName, +CIFSSMBSetEOF(const int xid, struct cifs_tcon *tcon, const char *fileName, __u64 size, bool SetAllocation, const struct nls_table *nls_codepage, int remap) { @@ -5182,7 +5182,7 @@ SetEOFRetry: } int -CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size, +CIFSSMBSetFileSize(const int xid, struct cifs_tcon *tcon, __u64 size, __u16 fid, __u32 pid_of_opener, bool SetAllocation) { struct smb_com_transaction2_sfi_req *pSMB = NULL; @@ -5264,7 +5264,7 @@ CIFSSMBSetFileSize(const int xid, struct cifsTconInfo *tcon, __u64 size, time and resort to the original setpathinfo level which takes the ancient DOS time format with 2 second granularity */ int -CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon, +CIFSSMBSetFileInfo(const int xid, struct cifs_tcon *tcon, const FILE_BASIC_INFO *data, __u16 fid, __u32 pid_of_opener) { struct smb_com_transaction2_sfi_req *pSMB = NULL; @@ -5326,7 +5326,7 @@ CIFSSMBSetFileInfo(const int xid, struct cifsTconInfo *tcon, } int -CIFSSMBSetFileDisposition(const int xid, struct cifsTconInfo *tcon, +CIFSSMBSetFileDisposition(const int xid, struct cifs_tcon *tcon, bool delete_file, __u16 fid, __u32 pid_of_opener) { struct smb_com_transaction2_sfi_req *pSMB = NULL; @@ -5382,7 +5382,7 @@ CIFSSMBSetFileDisposition(const int xid, struct cifsTconInfo *tcon, } int -CIFSSMBSetPathInfo(const int xid, struct cifsTconInfo *tcon, +CIFSSMBSetPathInfo(const int xid, struct cifs_tcon *tcon, const char *fileName, const FILE_BASIC_INFO *data, const struct nls_table *nls_codepage, int remap) { @@ -5466,7 +5466,7 @@ SetTimesRetry: handling it anyway and NT4 was what we thought it would be needed for Do not delete it until we prove whether needed for Win9x though */ int -CIFSSMBSetAttrLegacy(int xid, struct cifsTconInfo *tcon, char *fileName, +CIFSSMBSetAttrLegacy(int xid, struct cifs_tcon *tcon, char *fileName, __u16 dos_attrs, const struct nls_table *nls_codepage) { SETATTR_REQ *pSMB = NULL; @@ -5554,7 +5554,7 @@ cifs_fill_unix_set_info(FILE_UNIX_BASIC_INFO *data_offset, } int -CIFSSMBUnixSetFileInfo(const int xid, struct cifsTconInfo *tcon, +CIFSSMBUnixSetFileInfo(const int xid, struct cifs_tcon *tcon, const struct cifs_unix_set_info_args *args, u16 fid, u32 pid_of_opener) { @@ -5617,7 +5617,7 @@ CIFSSMBUnixSetFileInfo(const int xid, struct cifsTconInfo *tcon, } int -CIFSSMBUnixSetPathInfo(const int xid, struct cifsTconInfo *tcon, char *fileName, +CIFSSMBUnixSetPathInfo(const int xid, struct cifs_tcon *tcon, char *fileName, const struct cifs_unix_set_info_args *args, const struct nls_table *nls_codepage, int remap) { @@ -5704,7 +5704,7 @@ setPermsRetry: * the data isn't copied to it, but the length is returned. */ ssize_t -CIFSSMBQAllEAs(const int xid, struct cifsTconInfo *tcon, +CIFSSMBQAllEAs(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, const unsigned char *ea_name, char *EAData, size_t buf_size, const struct nls_table *nls_codepage, int remap) @@ -5885,7 +5885,7 @@ QAllEAsOut: } int -CIFSSMBSetEA(const int xid, struct cifsTconInfo *tcon, const char *fileName, +CIFSSMBSetEA(const int xid, struct cifs_tcon *tcon, const char *fileName, const char *ea_name, const void *ea_value, const __u16 ea_value_len, const struct nls_table *nls_codepage, int remap) @@ -6012,7 +6012,7 @@ SetEARetry: * incompatible for network fs clients, we could instead simply * expose this config flag by adding a future cifs (and smb2) notify ioctl. */ -int CIFSSMBNotify(const int xid, struct cifsTconInfo *tcon, +int CIFSSMBNotify(const int xid, struct cifs_tcon *tcon, const int notify_subdirs, const __u16 netfid, __u32 filter, struct file *pfile, int multishot, const struct nls_table *nls_codepage) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 21bc83586beb..6d88b82537c3 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -79,8 +79,8 @@ cifs_reconnect(struct TCP_Server_Info *server) { int rc = 0; struct list_head *tmp, *tmp2; - struct cifsSesInfo *ses; - struct cifsTconInfo *tcon; + struct cifs_ses *ses; + struct cifs_tcon *tcon; struct mid_q_entry *mid_entry; struct list_head retry_list; @@ -102,11 +102,11 @@ cifs_reconnect(struct TCP_Server_Info *server) cFYI(1, "%s: marking sessions and tcons for reconnect", __func__); spin_lock(&cifs_tcp_ses_lock); list_for_each(tmp, &server->smb_ses_list) { - ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + ses = list_entry(tmp, struct cifs_ses, smb_ses_list); ses->need_reconnect = true; ses->ipc_tid = 0; list_for_each(tmp2, &ses->tcon_list) { - tcon = list_entry(tmp2, struct cifsTconInfo, tcon_list); + tcon = list_entry(tmp2, struct cifs_tcon, tcon_list); tcon->need_reconnect = true; } } @@ -1597,10 +1597,10 @@ match_security(struct TCP_Server_Info *server, struct smb_vol *vol) /* now check if signing mode is acceptable */ if ((secFlags & CIFSSEC_MAY_SIGN) == 0 && - (server->secMode & SECMODE_SIGN_REQUIRED)) + (server->sec_mode & SECMODE_SIGN_REQUIRED)) return false; else if (((secFlags & CIFSSEC_MUST_SIGN) == CIFSSEC_MUST_SIGN) && - (server->secMode & + (server->sec_mode & (SECMODE_SIGN_ENABLED|SECMODE_SIGN_REQUIRED)) == 0) return false; @@ -1827,7 +1827,7 @@ out_err: return ERR_PTR(rc); } -static int match_session(struct cifsSesInfo *ses, struct smb_vol *vol) +static int match_session(struct cifs_ses *ses, struct smb_vol *vol) { switch (ses->server->secType) { case Kerberos: @@ -1851,10 +1851,10 @@ static int match_session(struct cifsSesInfo *ses, struct smb_vol *vol) return 1; } -static struct cifsSesInfo * +static struct cifs_ses * cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb_vol *vol) { - struct cifsSesInfo *ses; + struct cifs_ses *ses; spin_lock(&cifs_tcp_ses_lock); list_for_each_entry(ses, &server->smb_ses_list, smb_ses_list) { @@ -1869,7 +1869,7 @@ cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb_vol *vol) } static void -cifs_put_smb_ses(struct cifsSesInfo *ses) +cifs_put_smb_ses(struct cifs_ses *ses) { int xid; struct TCP_Server_Info *server = ses->server; @@ -1895,11 +1895,11 @@ cifs_put_smb_ses(struct cifsSesInfo *ses) static bool warned_on_ntlm; /* globals init to false automatically */ -static struct cifsSesInfo * +static struct cifs_ses * cifs_get_smb_ses(struct TCP_Server_Info *server, struct smb_vol *volume_info) { int rc = -ENOMEM, xid; - struct cifsSesInfo *ses; + struct cifs_ses *ses; struct sockaddr_in *addr = (struct sockaddr_in *)&server->dstaddr; struct sockaddr_in6 *addr6 = (struct sockaddr_in6 *)&server->dstaddr; @@ -2002,7 +2002,7 @@ get_ses_fail: return ERR_PTR(rc); } -static int match_tcon(struct cifsTconInfo *tcon, const char *unc) +static int match_tcon(struct cifs_tcon *tcon, const char *unc) { if (tcon->tidStatus == CifsExiting) return 0; @@ -2011,15 +2011,15 @@ static int match_tcon(struct cifsTconInfo *tcon, const char *unc) return 1; } -static struct cifsTconInfo * -cifs_find_tcon(struct cifsSesInfo *ses, const char *unc) +static struct cifs_tcon * +cifs_find_tcon(struct cifs_ses *ses, const char *unc) { struct list_head *tmp; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; spin_lock(&cifs_tcp_ses_lock); list_for_each(tmp, &ses->tcon_list) { - tcon = list_entry(tmp, struct cifsTconInfo, tcon_list); + tcon = list_entry(tmp, struct cifs_tcon, tcon_list); if (!match_tcon(tcon, unc)) continue; ++tcon->tc_count; @@ -2031,10 +2031,10 @@ cifs_find_tcon(struct cifsSesInfo *ses, const char *unc) } static void -cifs_put_tcon(struct cifsTconInfo *tcon) +cifs_put_tcon(struct cifs_tcon *tcon) { int xid; - struct cifsSesInfo *ses = tcon->ses; + struct cifs_ses *ses = tcon->ses; cFYI(1, "%s: tc_count=%d\n", __func__, tcon->tc_count); spin_lock(&cifs_tcp_ses_lock); @@ -2055,11 +2055,11 @@ cifs_put_tcon(struct cifsTconInfo *tcon) cifs_put_smb_ses(ses); } -static struct cifsTconInfo * -cifs_get_tcon(struct cifsSesInfo *ses, struct smb_vol *volume_info) +static struct cifs_tcon * +cifs_get_tcon(struct cifs_ses *ses, struct smb_vol *volume_info) { int rc, xid; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; tcon = cifs_find_tcon(ses, volume_info->UNC); if (tcon) { @@ -2197,8 +2197,8 @@ cifs_match_super(struct super_block *sb, void *data) struct smb_vol *volume_info; struct cifs_sb_info *cifs_sb; struct TCP_Server_Info *tcp_srv; - struct cifsSesInfo *ses; - struct cifsTconInfo *tcon; + struct cifs_ses *ses; + struct cifs_tcon *tcon; struct tcon_link *tlink; struct sockaddr_storage addr; int rc = 0; @@ -2243,7 +2243,7 @@ out: } int -get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path, +get_dfs_path(int xid, struct cifs_ses *pSesInfo, const char *old_path, const struct nls_table *nls_codepage, unsigned int *pnum_referrals, struct dfs_info3_param **preferrals, int remap) { @@ -2542,7 +2542,7 @@ ip_connect(struct TCP_Server_Info *server) return generic_ip_connect(server); } -void reset_cifs_unix_caps(int xid, struct cifsTconInfo *tcon, +void reset_cifs_unix_caps(int xid, struct cifs_tcon *tcon, struct super_block *sb, struct smb_vol *vol_info) { /* if we are reconnecting then should we check to see if @@ -2771,7 +2771,7 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, #define CIFS_DEFAULT_WSIZE (1024 * 1024) static unsigned int -cifs_negotiate_wsize(struct cifsTconInfo *tcon, struct smb_vol *pvolume_info) +cifs_negotiate_wsize(struct cifs_tcon *tcon, struct smb_vol *pvolume_info) { __u64 unix_cap = le64_to_cpu(tcon->fsUnixInfo.Capability); struct TCP_Server_Info *server = tcon->ses->server; @@ -2793,7 +2793,7 @@ cifs_negotiate_wsize(struct cifsTconInfo *tcon, struct smb_vol *pvolume_info) } static int -is_path_accessible(int xid, struct cifsTconInfo *tcon, +is_path_accessible(int xid, struct cifs_tcon *tcon, struct cifs_sb_info *cifs_sb, const char *full_path) { int rc; @@ -2868,7 +2868,7 @@ build_unc_path_to_root(const struct smb_vol *volume_info, * determine whether there were referrals. */ static int -expand_dfs_referral(int xid, struct cifsSesInfo *pSesInfo, +expand_dfs_referral(int xid, struct cifs_ses *pSesInfo, struct smb_vol *volume_info, struct cifs_sb_info *cifs_sb, int check_prefix) { @@ -2973,8 +2973,8 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, { int rc = 0; int xid; - struct cifsSesInfo *pSesInfo; - struct cifsTconInfo *tcon; + struct cifs_ses *pSesInfo; + struct cifs_tcon *tcon; struct TCP_Server_Info *srvTcp; char *full_path; struct tcon_link *tlink; @@ -3172,8 +3172,8 @@ out: } int -CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, - const char *tree, struct cifsTconInfo *tcon, +CIFSTCon(unsigned int xid, struct cifs_ses *ses, + const char *tree, struct cifs_tcon *tcon, const struct nls_table *nls_codepage) { struct smb_hdr *smb_buffer; @@ -3205,7 +3205,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, pSMB->AndXCommand = 0xFF; pSMB->Flags = cpu_to_le16(TCON_EXTENDED_SECINFO); bcc_ptr = &pSMB->Password[0]; - if ((ses->server->secMode) & SECMODE_USER) { + if ((ses->server->sec_mode) & SECMODE_USER) { pSMB->PasswordLength = cpu_to_le16(1); /* minimum */ *bcc_ptr = 0; /* password is null byte */ bcc_ptr++; /* skip password */ @@ -3222,7 +3222,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, if ((global_secflags & CIFSSEC_MAY_LANMAN) && (ses->server->secType == LANMAN)) calc_lanman_hash(tcon->password, ses->server->cryptkey, - ses->server->secMode & + ses->server->sec_mode & SECMODE_PW_ENCRYPT ? true : false, bcc_ptr); else @@ -3238,7 +3238,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses, } } - if (ses->server->secMode & + if (ses->server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE; @@ -3353,7 +3353,7 @@ cifs_umount(struct super_block *sb, struct cifs_sb_info *cifs_sb) return 0; } -int cifs_negotiate_protocol(unsigned int xid, struct cifsSesInfo *ses) +int cifs_negotiate_protocol(unsigned int xid, struct cifs_ses *ses) { int rc = 0; struct TCP_Server_Info *server = ses->server; @@ -3383,7 +3383,7 @@ int cifs_negotiate_protocol(unsigned int xid, struct cifsSesInfo *ses) } -int cifs_setup_session(unsigned int xid, struct cifsSesInfo *ses, +int cifs_setup_session(unsigned int xid, struct cifs_ses *ses, struct nls_table *nls_info) { int rc = 0; @@ -3395,7 +3395,7 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *ses, ses->capabilities &= (~CAP_UNIX); cFYI(1, "Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d", - server->secMode, server->capabilities, server->timeAdj); + server->sec_mode, server->capabilities, server->timeAdj); rc = CIFS_SessSetup(xid, ses, nls_info); if (rc) { @@ -3427,12 +3427,12 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *ses, return rc; } -static struct cifsTconInfo * +static struct cifs_tcon * cifs_construct_tcon(struct cifs_sb_info *cifs_sb, uid_t fsuid) { - struct cifsTconInfo *master_tcon = cifs_sb_master_tcon(cifs_sb); - struct cifsSesInfo *ses; - struct cifsTconInfo *tcon = NULL; + struct cifs_tcon *master_tcon = cifs_sb_master_tcon(cifs_sb); + struct cifs_ses *ses; + struct cifs_tcon *tcon = NULL; struct smb_vol *vol_info; char username[28]; /* big enough for "krb50x" + hex of ULONG_MAX 6+16 */ /* We used to have this as MAX_USERNAME which is */ @@ -3465,7 +3465,7 @@ cifs_construct_tcon(struct cifs_sb_info *cifs_sb, uid_t fsuid) ses = cifs_get_smb_ses(master_tcon->ses->server, vol_info); if (IS_ERR(ses)) { - tcon = (struct cifsTconInfo *)ses; + tcon = (struct cifs_tcon *)ses; cifs_put_tcp_session(master_tcon->ses->server); goto out; } @@ -3490,7 +3490,7 @@ cifs_sb_master_tlink(struct cifs_sb_info *cifs_sb) return cifs_sb->master_tlink; } -struct cifsTconInfo * +struct cifs_tcon * cifs_sb_master_tcon(struct cifs_sb_info *cifs_sb) { return tlink_tcon(cifs_sb_master_tlink(cifs_sb)); diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index aa0669a82922..81914df47ef1 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -54,7 +54,7 @@ build_path_from_dentry(struct dentry *direntry) char *full_path; char dirsep; struct cifs_sb_info *cifs_sb = CIFS_SB(direntry->d_sb); - struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb); + struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb); if (direntry == NULL) return NULL; /* not much we can do if dentry is freed and @@ -149,7 +149,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, __u16 fileHandle; struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; char *full_path = NULL; FILE_ALL_INFO *buf = NULL; struct inode *newinode = NULL; @@ -353,7 +353,7 @@ int cifs_mknod(struct inode *inode, struct dentry *direntry, int mode, int xid; struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct cifs_io_parms io_parms; char *full_path = NULL; struct inode *newinode = NULL; @@ -485,7 +485,7 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry, bool posix_open = false; struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct cifsFileInfo *cfile; struct inode *newInode = NULL; char *full_path = NULL; diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 7db74d17a429..bb71471a4d9d 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -114,7 +114,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode, struct cifs_sb_info *cifs_sb = CIFS_SB(sb); struct cifs_fattr fattr; struct tcon_link *tlink; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; cFYI(1, "posix open %s", full_path); @@ -168,7 +168,7 @@ posix_open_ret: static int cifs_nt_open(char *full_path, struct inode *inode, struct cifs_sb_info *cifs_sb, - struct cifsTconInfo *tcon, unsigned int f_flags, __u32 *poplock, + struct cifs_tcon *tcon, unsigned int f_flags, __u32 *poplock, __u16 *pnetfid, int xid) { int rc; @@ -285,7 +285,7 @@ cifs_new_fileinfo(__u16 fileHandle, struct file *file, void cifsFileInfo_put(struct cifsFileInfo *cifs_file) { struct inode *inode = cifs_file->dentry->d_inode; - struct cifsTconInfo *tcon = tlink_tcon(cifs_file->tlink); + struct cifs_tcon *tcon = tlink_tcon(cifs_file->tlink); struct cifsInodeInfo *cifsi = CIFS_I(inode); struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct cifsLockInfo *li, *tmp; @@ -343,7 +343,7 @@ int cifs_open(struct inode *inode, struct file *file) int xid; __u32 oplock; struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; struct tcon_link *tlink; struct cifsFileInfo *pCifsFile = NULL; char *full_path = NULL; @@ -457,7 +457,7 @@ static int cifs_reopen_file(struct cifsFileInfo *pCifsFile, bool can_flush) int xid; __u32 oplock; struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; struct cifsInodeInfo *pCifsInode; struct inode *inode; char *full_path = NULL; @@ -596,7 +596,7 @@ int cifs_closedir(struct inode *inode, struct file *file) xid = GetXid(); if (pCFileStruct) { - struct cifsTconInfo *pTcon = tlink_tcon(pCFileStruct->tlink); + struct cifs_tcon *pTcon = tlink_tcon(pCFileStruct->tlink); cFYI(1, "Freeing private data in close dir"); spin_lock(&cifs_file_list_lock); @@ -653,7 +653,7 @@ int cifs_lock(struct file *file, int cmd, struct file_lock *pfLock) __u64 length; bool wait_flag = false; struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; __u16 netfid; __u8 lockType = LOCKING_ANDX_LARGE_FILES; bool posix_locking = 0; @@ -865,7 +865,7 @@ static ssize_t cifs_write(struct cifsFileInfo *open_file, __u32 pid, unsigned int bytes_written = 0; unsigned int total_written; struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; int xid; struct dentry *dentry = open_file->dentry; struct cifsInodeInfo *cifsi = CIFS_I(dentry->d_inode); @@ -1405,7 +1405,7 @@ int cifs_strict_fsync(struct file *file, int datasync) { int xid; int rc = 0; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; struct cifsFileInfo *smbfile = file->private_data; struct inode *inode = file->f_path.dentry->d_inode; struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); @@ -1435,7 +1435,7 @@ int cifs_fsync(struct file *file, int datasync) { int xid; int rc = 0; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; struct cifsFileInfo *smbfile = file->private_data; struct cifs_sb_info *cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); @@ -1526,7 +1526,7 @@ cifs_iovec_write(struct file *file, const struct iovec *iov, struct iov_iter it; struct inode *inode; struct cifsFileInfo *open_file; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct cifs_sb_info *cifs_sb; struct cifs_io_parms io_parms; int xid, rc; @@ -1693,7 +1693,7 @@ cifs_iovec_read(struct file *file, const struct iovec *iov, size_t len, cur_len; int iov_offset = 0; struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct cifsFileInfo *open_file; struct smb_com_read_rsp *pSMBr; struct cifs_io_parms io_parms; @@ -1815,7 +1815,7 @@ static ssize_t cifs_read(struct file *file, char *read_data, size_t read_size, unsigned int total_read; unsigned int current_read_size; struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; int xid; char *current_offset; struct cifsFileInfo *open_file; @@ -1998,7 +1998,7 @@ static int cifs_readpages(struct file *file, struct address_space *mapping, loff_t offset; struct page *page; struct cifs_sb_info *cifs_sb; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; unsigned int bytes_read = 0; unsigned int read_size, i; char *smb_read_data = NULL; diff --git a/fs/cifs/fscache.c b/fs/cifs/fscache.c index 297a43d0ff7f..d368a47ba5eb 100644 --- a/fs/cifs/fscache.c +++ b/fs/cifs/fscache.c @@ -40,7 +40,7 @@ void cifs_fscache_release_client_cookie(struct TCP_Server_Info *server) server->fscache = NULL; } -void cifs_fscache_get_super_cookie(struct cifsTconInfo *tcon) +void cifs_fscache_get_super_cookie(struct cifs_tcon *tcon) { struct TCP_Server_Info *server = tcon->ses->server; @@ -51,7 +51,7 @@ void cifs_fscache_get_super_cookie(struct cifsTconInfo *tcon) server->fscache, tcon->fscache); } -void cifs_fscache_release_super_cookie(struct cifsTconInfo *tcon) +void cifs_fscache_release_super_cookie(struct cifs_tcon *tcon) { cFYI(1, "CIFS: releasing superblock cookie (0x%p)", tcon->fscache); fscache_relinquish_cookie(tcon->fscache, 0); @@ -62,7 +62,7 @@ static void cifs_fscache_enable_inode_cookie(struct inode *inode) { struct cifsInodeInfo *cifsi = CIFS_I(inode); struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); - struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb); + struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb); if (cifsi->fscache) return; diff --git a/fs/cifs/fscache.h b/fs/cifs/fscache.h index 31b88ec2341e..63539323e0b9 100644 --- a/fs/cifs/fscache.h +++ b/fs/cifs/fscache.h @@ -40,8 +40,8 @@ extern void cifs_fscache_unregister(void); */ extern void cifs_fscache_get_client_cookie(struct TCP_Server_Info *); extern void cifs_fscache_release_client_cookie(struct TCP_Server_Info *); -extern void cifs_fscache_get_super_cookie(struct cifsTconInfo *); -extern void cifs_fscache_release_super_cookie(struct cifsTconInfo *); +extern void cifs_fscache_get_super_cookie(struct cifs_tcon *); +extern void cifs_fscache_release_super_cookie(struct cifs_tcon *); extern void cifs_fscache_release_inode_cookie(struct inode *); extern void cifs_fscache_set_inode_cookie(struct inode *, struct file *); @@ -99,9 +99,9 @@ static inline void cifs_fscache_get_client_cookie(struct TCP_Server_Info *server) {} static inline void cifs_fscache_release_client_cookie(struct TCP_Server_Info *server) {} -static inline void cifs_fscache_get_super_cookie(struct cifsTconInfo *tcon) {} +static inline void cifs_fscache_get_super_cookie(struct cifs_tcon *tcon) {} static inline void -cifs_fscache_release_super_cookie(struct cifsTconInfo *tcon) {} +cifs_fscache_release_super_cookie(struct cifs_tcon *tcon) {} static inline void cifs_fscache_release_inode_cookie(struct inode *inode) {} static inline void cifs_fscache_set_inode_cookie(struct inode *inode, diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index e2d9dd817ba0..9b018c8334fa 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -295,7 +295,7 @@ int cifs_get_file_info_unix(struct file *filp) struct inode *inode = filp->f_path.dentry->d_inode; struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct cifsFileInfo *cfile = filp->private_data; - struct cifsTconInfo *tcon = tlink_tcon(cfile->tlink); + struct cifs_tcon *tcon = tlink_tcon(cfile->tlink); xid = GetXid(); rc = CIFSSMBUnixQFileInfo(xid, tcon, cfile->netfid, &find_data); @@ -318,7 +318,7 @@ int cifs_get_inode_info_unix(struct inode **pinode, int rc; FILE_UNIX_BASIC_INFO find_data; struct cifs_fattr fattr; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; struct tcon_link *tlink; struct cifs_sb_info *cifs_sb = CIFS_SB(sb); @@ -373,7 +373,7 @@ cifs_sfu_type(struct cifs_fattr *fattr, const unsigned char *path, int oplock = 0; __u16 netfid; struct tcon_link *tlink; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; struct cifs_io_parms io_parms; char buf[24]; unsigned int bytes_read; @@ -473,7 +473,7 @@ static int cifs_sfu_mode(struct cifs_fattr *fattr, const unsigned char *path, char ea_value[4]; __u32 mode; struct tcon_link *tlink; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; tlink = cifs_sb_tlink(cifs_sb); if (IS_ERR(tlink)) @@ -507,7 +507,7 @@ static void cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info, struct cifs_sb_info *cifs_sb, bool adjust_tz) { - struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb); + struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb); memset(fattr, 0, sizeof(*fattr)); fattr->cf_cifsattrs = le32_to_cpu(info->Attributes); @@ -558,7 +558,7 @@ int cifs_get_file_info(struct file *filp) struct inode *inode = filp->f_path.dentry->d_inode; struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct cifsFileInfo *cfile = filp->private_data; - struct cifsTconInfo *tcon = tlink_tcon(cfile->tlink); + struct cifs_tcon *tcon = tlink_tcon(cfile->tlink); xid = GetXid(); rc = CIFSSMBQFileInfo(xid, tcon, cfile->netfid, &find_data); @@ -595,7 +595,7 @@ int cifs_get_inode_info(struct inode **pinode, struct super_block *sb, int xid, const __u16 *pfid) { int rc = 0, tmprc; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct tcon_link *tlink; struct cifs_sb_info *cifs_sb = CIFS_SB(sb); char *buf = NULL; @@ -741,7 +741,7 @@ static const struct inode_operations cifs_ipc_inode_ops = { }; char *cifs_build_path_to_root(struct smb_vol *vol, struct cifs_sb_info *cifs_sb, - struct cifsTconInfo *tcon) + struct cifs_tcon *tcon) { int pplen = vol->prepath ? strlen(vol->prepath) : 0; int dfsplen; @@ -889,7 +889,7 @@ struct inode *cifs_root_iget(struct super_block *sb) struct cifs_sb_info *cifs_sb = CIFS_SB(sb); struct inode *inode = NULL; long rc; - struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb); + struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb); xid = GetXid(); if (tcon->unix_ext) @@ -941,7 +941,7 @@ cifs_set_file_info(struct inode *inode, struct iattr *attrs, int xid, struct cifsInodeInfo *cifsInode = CIFS_I(inode); struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct tcon_link *tlink = NULL; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; FILE_BASIC_INFO info_buf; if (attrs == NULL) @@ -1059,7 +1059,7 @@ cifs_rename_pending_delete(char *full_path, struct dentry *dentry, int xid) struct cifsInodeInfo *cifsInode = CIFS_I(inode); struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct tcon_link *tlink; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; __u32 dosattr, origattr; FILE_BASIC_INFO *info_buf = NULL; @@ -1177,7 +1177,7 @@ int cifs_unlink(struct inode *dir, struct dentry *dentry) struct super_block *sb = dir->i_sb; struct cifs_sb_info *cifs_sb = CIFS_SB(sb); struct tcon_link *tlink; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; struct iattr *attrs = NULL; __u32 dosattr = 0, origattr = 0; @@ -1275,7 +1275,7 @@ int cifs_mkdir(struct inode *inode, struct dentry *direntry, int mode) int xid; struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; char *full_path = NULL; struct inode *newinode = NULL; struct cifs_fattr fattr; @@ -1453,7 +1453,7 @@ int cifs_rmdir(struct inode *inode, struct dentry *direntry) int xid; struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; char *full_path = NULL; struct cifsInodeInfo *cifsInode; @@ -1510,7 +1510,7 @@ cifs_do_rename(int xid, struct dentry *from_dentry, const char *fromPath, { struct cifs_sb_info *cifs_sb = CIFS_SB(from_dentry->d_sb); struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; __u16 srcfid; int oplock, rc; @@ -1562,7 +1562,7 @@ int cifs_rename(struct inode *source_dir, struct dentry *source_dentry, char *toName = NULL; struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; FILE_UNIX_BASIC_INFO *info_buf_source = NULL; FILE_UNIX_BASIC_INFO *info_buf_target; int xid, rc, tmprc; @@ -1792,7 +1792,7 @@ int cifs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) { struct cifs_sb_info *cifs_sb = CIFS_SB(dentry->d_sb); - struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb); + struct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb); struct inode *inode = dentry->d_inode; int rc; @@ -1870,7 +1870,7 @@ cifs_set_file_size(struct inode *inode, struct iattr *attrs, struct cifsInodeInfo *cifsInode = CIFS_I(inode); struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct tcon_link *tlink = NULL; - struct cifsTconInfo *pTcon = NULL; + struct cifs_tcon *pTcon = NULL; struct cifs_io_parms io_parms; /* @@ -1971,7 +1971,7 @@ cifs_setattr_unix(struct dentry *direntry, struct iattr *attrs) struct cifsInodeInfo *cifsInode = CIFS_I(inode); struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct cifs_unix_set_info_args *args = NULL; struct cifsFileInfo *open_file; @@ -2257,7 +2257,7 @@ cifs_setattr(struct dentry *direntry, struct iattr *attrs) { struct inode *inode = direntry->d_inode; struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); - struct cifsTconInfo *pTcon = cifs_sb_master_tcon(cifs_sb); + struct cifs_tcon *pTcon = cifs_sb_master_tcon(cifs_sb); if (pTcon->unix_ext) return cifs_setattr_unix(direntry, attrs); diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c index 0c98672d0122..4221b5e48a42 100644 --- a/fs/cifs/ioctl.c +++ b/fs/cifs/ioctl.c @@ -38,7 +38,7 @@ long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg) struct cifs_sb_info *cifs_sb; #ifdef CONFIG_CIFS_POSIX struct cifsFileInfo *pSMBFile = filep->private_data; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; __u64 ExtAttrBits = 0; __u64 ExtAttrMask = 0; __u64 caps; diff --git a/fs/cifs/link.c b/fs/cifs/link.c index 4682d44b6f5b..556b1a0b54de 100644 --- a/fs/cifs/link.c +++ b/fs/cifs/link.c @@ -175,7 +175,7 @@ CIFSFormatMFSymlink(u8 *buf, unsigned int buf_len, const char *link_str) } static int -CIFSCreateMFSymLink(const int xid, struct cifsTconInfo *tcon, +CIFSCreateMFSymLink(const int xid, struct cifs_tcon *tcon, const char *fromName, const char *toName, const struct nls_table *nls_codepage, int remap) { @@ -223,7 +223,7 @@ CIFSCreateMFSymLink(const int xid, struct cifsTconInfo *tcon, } static int -CIFSQueryMFSymLink(const int xid, struct cifsTconInfo *tcon, +CIFSQueryMFSymLink(const int xid, struct cifs_tcon *tcon, const unsigned char *searchName, char **symlinkinfo, const struct nls_table *nls_codepage, int remap) { @@ -298,7 +298,7 @@ CIFSCheckMFSymlink(struct cifs_fattr *fattr, int oplock = 0; __u16 netfid = 0; struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct cifs_io_parms io_parms; u8 *buf; char *pbuf; @@ -380,7 +380,7 @@ cifs_hardlink(struct dentry *old_file, struct inode *inode, char *toName = NULL; struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct cifsInodeInfo *cifsInode; tlink = cifs_sb_tlink(cifs_sb); @@ -455,7 +455,7 @@ cifs_follow_link(struct dentry *direntry, struct nameidata *nd) char *target_path = NULL; struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct tcon_link *tlink = NULL; - struct cifsTconInfo *tcon; + struct cifs_tcon *tcon; xid = GetXid(); @@ -528,7 +528,7 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname) int xid; struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; char *full_path = NULL; struct inode *newinode = NULL; diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 907531ac5888..03a1f491d39b 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -67,12 +67,12 @@ _FreeXid(unsigned int xid) spin_unlock(&GlobalMid_Lock); } -struct cifsSesInfo * +struct cifs_ses * sesInfoAlloc(void) { - struct cifsSesInfo *ret_buf; + struct cifs_ses *ret_buf; - ret_buf = kzalloc(sizeof(struct cifsSesInfo), GFP_KERNEL); + ret_buf = kzalloc(sizeof(struct cifs_ses), GFP_KERNEL); if (ret_buf) { atomic_inc(&sesInfoAllocCount); ret_buf->status = CifsNew; @@ -85,7 +85,7 @@ sesInfoAlloc(void) } void -sesInfoFree(struct cifsSesInfo *buf_to_free) +sesInfoFree(struct cifs_ses *buf_to_free) { if (buf_to_free == NULL) { cFYI(1, "Null buffer passed to sesInfoFree"); @@ -105,11 +105,11 @@ sesInfoFree(struct cifsSesInfo *buf_to_free) kfree(buf_to_free); } -struct cifsTconInfo * +struct cifs_tcon * tconInfoAlloc(void) { - struct cifsTconInfo *ret_buf; - ret_buf = kzalloc(sizeof(struct cifsTconInfo), GFP_KERNEL); + struct cifs_tcon *ret_buf; + ret_buf = kzalloc(sizeof(struct cifs_tcon), GFP_KERNEL); if (ret_buf) { atomic_inc(&tconInfoAllocCount); ret_buf->tidStatus = CifsNew; @@ -124,7 +124,7 @@ tconInfoAlloc(void) } void -tconInfoFree(struct cifsTconInfo *buf_to_free) +tconInfoFree(struct cifs_tcon *buf_to_free) { if (buf_to_free == NULL) { cFYI(1, "Null buffer passed to tconInfoFree"); @@ -295,11 +295,11 @@ __u16 GetNextMid(struct TCP_Server_Info *server) case it is responsbility of caller to set the mid */ void header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , - const struct cifsTconInfo *treeCon, int word_count + const struct cifs_tcon *treeCon, int word_count /* length of fixed section (word count) in two byte units */) { struct list_head *temp_item; - struct cifsSesInfo *ses; + struct cifs_ses *ses; char *temp = (char *) buffer; memset(temp, 0, 256); /* bigger than MAX_CIFS_HDR_SIZE */ @@ -359,7 +359,7 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , "did not match tcon uid"); spin_lock(&cifs_tcp_ses_lock); list_for_each(temp_item, &treeCon->ses->server->smb_ses_list) { - ses = list_entry(temp_item, struct cifsSesInfo, smb_ses_list); + ses = list_entry(temp_item, struct cifs_ses, smb_ses_list); if (ses->linux_uid == current_fsuid()) { if (ses->server == treeCon->ses->server) { cFYI(1, "found matching uid substitute right smb_uid"); @@ -380,7 +380,7 @@ header_assemble(struct smb_hdr *buffer, char smb_command /* command */ , if (treeCon->nocase) buffer->Flags |= SMBFLG_CASELESS; if ((treeCon->ses) && (treeCon->ses->server)) - if (treeCon->ses->server->secMode & + if (treeCon->ses->server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE; } @@ -507,8 +507,8 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) { struct smb_com_lock_req *pSMB = (struct smb_com_lock_req *)buf; struct list_head *tmp, *tmp1, *tmp2; - struct cifsSesInfo *ses; - struct cifsTconInfo *tcon; + struct cifs_ses *ses; + struct cifs_tcon *tcon; struct cifsInodeInfo *pCifsInode; struct cifsFileInfo *netfile; @@ -566,9 +566,9 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) /* look up tcon based on tid & uid */ spin_lock(&cifs_tcp_ses_lock); list_for_each(tmp, &srv->smb_ses_list) { - ses = list_entry(tmp, struct cifsSesInfo, smb_ses_list); + ses = list_entry(tmp, struct cifs_ses, smb_ses_list); list_for_each(tmp1, &ses->tcon_list) { - tcon = list_entry(tmp1, struct cifsTconInfo, tcon_list); + tcon = list_entry(tmp1, struct cifs_tcon, tcon_list); if (tcon->tid != buf->Tid) continue; diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index f8e4cd2a7912..6751e745bbc6 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -195,7 +195,7 @@ int get_symlink_reparse_path(char *full_path, struct cifs_sb_info *cifs_sb, int len; int oplock = 0; int rc; - struct cifsTconInfo *ptcon = cifs_sb_tcon(cifs_sb); + struct cifs_tcon *ptcon = cifs_sb_tcon(cifs_sb); char *tmpbuffer; rc = CIFSSMBOpen(xid, ptcon, full_path, FILE_OPEN, GENERIC_READ, @@ -223,7 +223,7 @@ static int initiate_cifs_search(const int xid, struct file *file) struct cifsFileInfo *cifsFile; struct cifs_sb_info *cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); struct tcon_link *tlink = NULL; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; if (file->private_data == NULL) { tlink = cifs_sb_tlink(cifs_sb); @@ -496,7 +496,7 @@ static int cifs_save_resume_key(const char *current_entry, assume that they are located in the findfirst return buffer.*/ /* We start counting in the buffer with entry 2 and increment for every entry (do not increment for . or .. entry) */ -static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon, +static int find_cifs_entry(const int xid, struct cifs_tcon *pTcon, struct file *file, char **ppCurrentEntry, int *num_to_ret) { int rc = 0; @@ -764,7 +764,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir) { int rc = 0; int xid, i; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct cifsFileInfo *cifsFile = NULL; char *current_entry; int num_to_fill = 0; diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c index 7dd462100378..3892ab817a36 100644 --- a/fs/cifs/sess.c +++ b/fs/cifs/sess.c @@ -37,13 +37,13 @@ * the socket has been reestablished (so we know whether to use vc 0). * Called while holding the cifs_tcp_ses_lock, so do not block */ -static bool is_first_ses_reconnect(struct cifsSesInfo *ses) +static bool is_first_ses_reconnect(struct cifs_ses *ses) { struct list_head *tmp; - struct cifsSesInfo *tmp_ses; + struct cifs_ses *tmp_ses; list_for_each(tmp, &ses->server->smb_ses_list) { - tmp_ses = list_entry(tmp, struct cifsSesInfo, + tmp_ses = list_entry(tmp, struct cifs_ses, smb_ses_list); if (tmp_ses->need_reconnect == false) return false; @@ -61,11 +61,11 @@ static bool is_first_ses_reconnect(struct cifsSesInfo *ses) * any vc but zero (some servers reset the connection on vcnum zero) * */ -static __le16 get_next_vcnum(struct cifsSesInfo *ses) +static __le16 get_next_vcnum(struct cifs_ses *ses) { __u16 vcnum = 0; struct list_head *tmp; - struct cifsSesInfo *tmp_ses; + struct cifs_ses *tmp_ses; __u16 max_vcs = ses->server->max_vcs; __u16 i; int free_vc_found = 0; @@ -87,7 +87,7 @@ static __le16 get_next_vcnum(struct cifsSesInfo *ses) free_vc_found = 1; list_for_each(tmp, &ses->server->smb_ses_list) { - tmp_ses = list_entry(tmp, struct cifsSesInfo, + tmp_ses = list_entry(tmp, struct cifs_ses, smb_ses_list); if (tmp_ses->vcnum == i) { free_vc_found = 0; @@ -114,7 +114,7 @@ get_vc_num_exit: return cpu_to_le16(vcnum); } -static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB) +static __u32 cifs_ssetup_hdr(struct cifs_ses *ses, SESSION_SETUP_ANDX *pSMB) { __u32 capabilities = 0; @@ -136,7 +136,7 @@ static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB) capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS | CAP_LARGE_WRITE_X | CAP_LARGE_READ_X; - if (ses->server->secMode & + if (ses->server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) pSMB->req.hdr.Flags2 |= SMBFLG2_SECURITY_SIGNATURE; @@ -181,7 +181,7 @@ unicode_oslm_strings(char **pbcc_area, const struct nls_table *nls_cp) *pbcc_area = bcc_ptr; } -static void unicode_domain_string(char **pbcc_area, struct cifsSesInfo *ses, +static void unicode_domain_string(char **pbcc_area, struct cifs_ses *ses, const struct nls_table *nls_cp) { char *bcc_ptr = *pbcc_area; @@ -204,7 +204,7 @@ static void unicode_domain_string(char **pbcc_area, struct cifsSesInfo *ses, } -static void unicode_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses, +static void unicode_ssetup_strings(char **pbcc_area, struct cifs_ses *ses, const struct nls_table *nls_cp) { char *bcc_ptr = *pbcc_area; @@ -236,7 +236,7 @@ static void unicode_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses, *pbcc_area = bcc_ptr; } -static void ascii_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses, +static void ascii_ssetup_strings(char **pbcc_area, struct cifs_ses *ses, const struct nls_table *nls_cp) { char *bcc_ptr = *pbcc_area; @@ -276,7 +276,7 @@ static void ascii_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses, } static void -decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses, +decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifs_ses *ses, const struct nls_table *nls_cp) { int len; @@ -310,7 +310,7 @@ decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses, } static int decode_ascii_ssetup(char **pbcc_area, __u16 bleft, - struct cifsSesInfo *ses, + struct cifs_ses *ses, const struct nls_table *nls_cp) { int rc = 0; @@ -364,7 +364,7 @@ static int decode_ascii_ssetup(char **pbcc_area, __u16 bleft, } static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len, - struct cifsSesInfo *ses) + struct cifs_ses *ses) { unsigned int tioffset; /* challenge message target info area */ unsigned int tilen; /* challenge message target info area length */ @@ -411,7 +411,7 @@ static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len, /* We do not malloc the blob, it is passed in pbuffer, because it is fixed size, and small, making this approach cleaner */ static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer, - struct cifsSesInfo *ses) + struct cifs_ses *ses) { NEGOTIATE_MESSAGE *sec_blob = (NEGOTIATE_MESSAGE *)pbuffer; __u32 flags; @@ -424,7 +424,7 @@ static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer, flags = NTLMSSP_NEGOTIATE_56 | NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_EXTENDED_SEC; - if (ses->server->secMode & + if (ses->server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) { flags |= NTLMSSP_NEGOTIATE_SIGN; if (!ses->server->session_estab) @@ -449,7 +449,7 @@ static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer, This function returns the length of the data in the blob */ static int build_ntlmssp_auth_blob(unsigned char *pbuffer, u16 *buflen, - struct cifsSesInfo *ses, + struct cifs_ses *ses, const struct nls_table *nls_cp) { int rc; @@ -464,10 +464,10 @@ static int build_ntlmssp_auth_blob(unsigned char *pbuffer, NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_TARGET_INFO | NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_EXTENDED_SEC; - if (ses->server->secMode & + if (ses->server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) flags |= NTLMSSP_NEGOTIATE_SIGN; - if (ses->server->secMode & SECMODE_SIGN_REQUIRED) + if (ses->server->sec_mode & SECMODE_SIGN_REQUIRED) flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN; tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE); @@ -551,7 +551,7 @@ setup_ntlmv2_ret: } int -CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, +CIFS_SessSetup(unsigned int xid, struct cifs_ses *ses, const struct nls_table *nls_cp) { int rc = 0; @@ -657,7 +657,7 @@ ssetup_ntlmssp_authenticate: */ rc = calc_lanman_hash(ses->password, ses->server->cryptkey, - ses->server->secMode & SECMODE_PW_ENCRYPT ? + ses->server->sec_mode & SECMODE_PW_ENCRYPT ? true : false, lnm_session_key); ses->flags |= CIFS_SES_LANMAN; diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c index d1998b6086ef..147aa22c3c3a 100644 --- a/fs/cifs/transport.c +++ b/fs/cifs/transport.c @@ -295,7 +295,7 @@ static int wait_for_free_request(struct TCP_Server_Info *server, return 0; } -static int allocate_mid(struct cifsSesInfo *ses, struct smb_hdr *in_buf, +static int allocate_mid(struct cifs_ses *ses, struct smb_hdr *in_buf, struct mid_q_entry **ppmidQ) { if (ses->server->tcpStatus == CifsExiting) { @@ -355,7 +355,7 @@ cifs_call_async(struct TCP_Server_Info *server, struct kvec *iov, return rc; /* enable signing if server requires it */ - if (server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) + if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) hdr->Flags2 |= SMBFLG2_SECURITY_SIGNATURE; mutex_lock(&server->srv_mutex); @@ -409,7 +409,7 @@ out_err: * */ int -SendReceiveNoRsp(const unsigned int xid, struct cifsSesInfo *ses, +SendReceiveNoRsp(const unsigned int xid, struct cifs_ses *ses, struct smb_hdr *in_buf, int flags) { int rc; @@ -504,7 +504,7 @@ cifs_check_receive(struct mid_q_entry *mid, struct TCP_Server_Info *server, min_t(u32, 92, be32_to_cpu(mid->resp_buf->smb_buf_length))); /* convert the length into a more usable form */ - if (server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) { + if (server->sec_mode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED)) { /* FIXME: add code to kill session */ if (cifs_verify_signature(mid->resp_buf, server, mid->sequence_number + 1) != 0) @@ -516,7 +516,7 @@ cifs_check_receive(struct mid_q_entry *mid, struct TCP_Server_Info *server, } int -SendReceive2(const unsigned int xid, struct cifsSesInfo *ses, +SendReceive2(const unsigned int xid, struct cifs_ses *ses, struct kvec *iov, int n_vec, int *pRespBufType /* ret */, const int flags) { @@ -645,7 +645,7 @@ out: } int -SendReceive(const unsigned int xid, struct cifsSesInfo *ses, +SendReceive(const unsigned int xid, struct cifs_ses *ses, struct smb_hdr *in_buf, struct smb_hdr *out_buf, int *pbytes_returned, const int long_op) { @@ -761,12 +761,12 @@ out: blocking lock to return. */ static int -send_lock_cancel(const unsigned int xid, struct cifsTconInfo *tcon, +send_lock_cancel(const unsigned int xid, struct cifs_tcon *tcon, struct smb_hdr *in_buf, struct smb_hdr *out_buf) { int bytes_returned; - struct cifsSesInfo *ses = tcon->ses; + struct cifs_ses *ses = tcon->ses; LOCK_REQ *pSMB = (LOCK_REQ *)in_buf; /* We just modify the current in_buf to change @@ -783,14 +783,14 @@ send_lock_cancel(const unsigned int xid, struct cifsTconInfo *tcon, } int -SendReceiveBlockingLock(const unsigned int xid, struct cifsTconInfo *tcon, +SendReceiveBlockingLock(const unsigned int xid, struct cifs_tcon *tcon, struct smb_hdr *in_buf, struct smb_hdr *out_buf, int *pbytes_returned) { int rc = 0; int rstart = 0; struct mid_q_entry *midQ; - struct cifsSesInfo *ses; + struct cifs_ses *ses; if (tcon == NULL || tcon->ses == NULL) { cERROR(1, "Null smb session"); diff --git a/fs/cifs/xattr.c b/fs/cifs/xattr.c index 912995e013ec..2a22fb2989e4 100644 --- a/fs/cifs/xattr.c +++ b/fs/cifs/xattr.c @@ -49,7 +49,7 @@ int cifs_removexattr(struct dentry *direntry, const char *ea_name) int xid; struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct super_block *sb; char *full_path = NULL; @@ -109,7 +109,7 @@ int cifs_setxattr(struct dentry *direntry, const char *ea_name, int xid; struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct super_block *sb; char *full_path; struct cifs_ntsd *pacl; @@ -240,7 +240,7 @@ ssize_t cifs_getxattr(struct dentry *direntry, const char *ea_name, int xid; struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct super_block *sb; char *full_path; @@ -372,7 +372,7 @@ ssize_t cifs_listxattr(struct dentry *direntry, char *data, size_t buf_size) int xid; struct cifs_sb_info *cifs_sb; struct tcon_link *tlink; - struct cifsTconInfo *pTcon; + struct cifs_tcon *pTcon; struct super_block *sb; char *full_path; -- cgit v1.2.3 From d86e0e83b32bc84600adb0b6ea1fce389b266682 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 27 May 2011 07:44:43 +0200 Subject: block: export blk_{get,put}_queue() We need them in SCSI to fix a bug, but currently they are not exported to modules. Export them. Signed-off-by: Jens Axboe --- block/blk-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/block/blk-core.c b/block/blk-core.c index dd8ae71168c5..d2f8f4049abd 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -345,6 +345,7 @@ void blk_put_queue(struct request_queue *q) { kobject_put(&q->kobj); } +EXPORT_SYMBOL(blk_put_queue); /* * Note: If a driver supplied the queue lock, it should not zap that lock @@ -566,6 +567,7 @@ int blk_get_queue(struct request_queue *q) return 1; } +EXPORT_SYMBOL(blk_get_queue); static inline void blk_free_request(struct request_queue *q, struct request *rq) { -- cgit v1.2.3 From ac04fee0b5c55bbac0858727a4154110b55d3f5a Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Fri, 27 May 2011 07:59:25 +0200 Subject: loop: export module parameters Export 'max_loop' and 'max_part' parameters to sysfs so user can know that how many devices are allowed and how many partitions are supported. If 'max_loop' is 0, there is no restriction on the number of loop devices. User can create/use the devices as many as minor numbers available. If 'max_part' is 0, it means simply the device doesn't support partitioning. Also note that 'max_part' can be adjusted to power of 2 minus 1 form if needed. User should check this value after the module loading if he/she want to use that number correctly (i.e. fdisk, mknod, etc.). Signed-off-by: Namhyung Kim Cc: Laurent Vivier Signed-off-by: Jens Axboe --- drivers/block/loop.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index c59a672a3de0..76c8da78212b 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1540,9 +1540,9 @@ static const struct block_device_operations lo_fops = { * And now the modules code and kernel interface. */ static int max_loop; -module_param(max_loop, int, 0); +module_param(max_loop, int, S_IRUGO); MODULE_PARM_DESC(max_loop, "Maximum number of loop devices"); -module_param(max_part, int, 0); +module_param(max_part, int, S_IRUGO); MODULE_PARM_DESC(max_part, "Maximum number of partitions per loop device"); MODULE_LICENSE("GPL"); MODULE_ALIAS_BLOCKDEV_MAJOR(LOOP_MAJOR); @@ -1688,9 +1688,20 @@ static int __init loop_init(void) */ part_shift = 0; - if (max_part > 0) + if (max_part > 0) { part_shift = fls(max_part); + /* + * Adjust max_part according to part_shift as it is exported + * to user space so that user can decide correct minor number + * if [s]he want to create more devices. + * + * Note that -1 is required because partition 0 is reserved + * for the whole disk. + */ + max_part = (1UL << part_shift) - 1; + } + if ((1UL << part_shift) > DISK_MAX_PARTS) return -EINVAL; -- cgit v1.2.3 From 6aea6f5068cb86e89a6ac243c3fc131045b6563a Mon Sep 17 00:00:00 2001 From: Tristan Ye Date: Fri, 27 May 2011 15:19:56 +0800 Subject: Ocfs2/move_extents: Avoid doing division in extent moving. It's not wise enough to do a 64bits division anywhere in kernside, replace it with a decent helper or proper shifts. Signed-off-by: Tristan Ye --- fs/ocfs2/move_extents.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c index 4c5488468c14..d184e0b4b95f 100644 --- a/fs/ocfs2/move_extents.c +++ b/fs/ocfs2/move_extents.c @@ -368,7 +368,7 @@ static int ocfs2_find_victim_alloc_group(struct inode *inode, int *vict_bit, struct buffer_head **ret_bh) { - int ret, i, blocks_per_unit = 1; + int ret, i, bits_per_unit = 0; u64 blkno; char namebuf[40]; @@ -398,14 +398,14 @@ static int ocfs2_find_victim_alloc_group(struct inode *inode, rec = &(cl->cl_recs[0]); if (type == GLOBAL_BITMAP_SYSTEM_INODE) - blocks_per_unit <<= (osb->s_clustersize_bits - - inode->i_sb->s_blocksize_bits); + bits_per_unit = osb->s_clustersize_bits - + inode->i_sb->s_blocksize_bits; /* * 'vict_blkno' was out of the valid range. */ if ((vict_blkno < le64_to_cpu(rec->c_blkno)) || - (vict_blkno >= (le32_to_cpu(ac_dinode->id1.bitmap1.i_total) * - blocks_per_unit))) { + (vict_blkno >= (le32_to_cpu(ac_dinode->id1.bitmap1.i_total) << + bits_per_unit))) { ret = -EINVAL; goto out; } @@ -441,8 +441,8 @@ static int ocfs2_find_victim_alloc_group(struct inode *inode, le16_to_cpu(bg->bg_bits))) { *ret_bh = gd_bh; - *vict_bit = (vict_blkno - blkno) / - blocks_per_unit; + *vict_bit = (vict_blkno - blkno) >> + bits_per_unit; mlog(0, "find the victim group: #%llu, " "total_bits: %u, vict_bit: %u\n", blkno, le16_to_cpu(bg->bg_bits), @@ -493,9 +493,8 @@ static int ocfs2_validate_and_adjust_move_goal(struct inode *inode, /* * make goal become cluster aligned. */ - if (range->me_goal % c_to_b) - range->me_goal = range->me_goal / c_to_b * c_to_b; - + range->me_goal = ocfs2_block_to_cluster_start(inode->i_sb, + range->me_goal); /* * moving goal is not allowd to start with a group desc blok(#0 blk) * let's compromise to the latter cluster. -- cgit v1.2.3 From ea5e1675ac832b42889ac8d254ea8fbfbdfaa8b2 Mon Sep 17 00:00:00 2001 From: Tristan Ye Date: Fri, 27 May 2011 15:24:14 +0800 Subject: Ocfs2/move_extents: Validate moving goal after the adjustment. though the goal_to_be_moved will be validated again in following moving, it's still a good idea to validate it after adjustment at the very beginning, instead of validating it before adjustment. Signed-off-by: Tristan Ye --- fs/ocfs2/move_extents.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c index d184e0b4b95f..cd9427023d2e 100644 --- a/fs/ocfs2/move_extents.c +++ b/fs/ocfs2/move_extents.c @@ -472,11 +472,23 @@ static int ocfs2_validate_and_adjust_move_goal(struct inode *inode, int ret, goal_bit = 0; struct buffer_head *gd_bh = NULL; - struct ocfs2_group_desc *bg; + struct ocfs2_group_desc *bg = NULL; struct ocfs2_super *osb = OCFS2_SB(inode->i_sb); int c_to_b = 1 << (osb->s_clustersize_bits - inode->i_sb->s_blocksize_bits); + /* + * make goal become cluster aligned. + */ + range->me_goal = ocfs2_block_to_cluster_start(inode->i_sb, + range->me_goal); + /* + * moving goal is not allowd to start with a group desc blok(#0 blk) + * let's compromise to the latter cluster. + */ + if (range->me_goal == le64_to_cpu(bg->bg_blkno)) + range->me_goal += c_to_b; + /* * validate goal sits within global_bitmap, and return the victim * group desc @@ -490,18 +502,6 @@ static int ocfs2_validate_and_adjust_move_goal(struct inode *inode, bg = (struct ocfs2_group_desc *)gd_bh->b_data; - /* - * make goal become cluster aligned. - */ - range->me_goal = ocfs2_block_to_cluster_start(inode->i_sb, - range->me_goal); - /* - * moving goal is not allowd to start with a group desc blok(#0 blk) - * let's compromise to the latter cluster. - */ - if (range->me_goal == le64_to_cpu(bg->bg_blkno)) - range->me_goal += c_to_b; - /* * movement is not gonna cross two groups. */ -- cgit v1.2.3 From 9c3e737561b2473ea1fc5b83a0c1d51e1ff3d294 Mon Sep 17 00:00:00 2001 From: Cliff Cai Date: Mon, 28 Mar 2011 04:57:11 -0400 Subject: spi/spi_bfin_sport: new driver for a SPI bus via the Blackfin SPORT peripheral The Blackfin SPORT peripheral is a pretty flexible device. With enough coaching, we can make it generate SPI compatible waveforms. This is desirable as the SPORT can run at much higher clock frequencies than the dedicated on-chip SPI peripheral, and it can do full duplex DMA. It also opens up the possibility of multiple SPI buses in case someone wants to dedicate a whole bus to a specific part that does not play well with others. Signed-off-by: Cliff Cai Signed-off-by: Bryan Wu Signed-off-by: Michael Hennerich Signed-off-by: Mike Frysinger Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 9 + drivers/spi/Makefile | 1 + drivers/spi/spi_bfin_sport.c | 952 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 962 insertions(+) create mode 100644 drivers/spi/spi_bfin_sport.c diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index fbd96b29530d..de35c3ad8a69 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -80,6 +80,15 @@ config SPI_BFIN help This is the SPI controller master driver for Blackfin 5xx processor. +config SPI_BFIN_SPORT + tristate "SPI bus via Blackfin SPORT" + depends on BLACKFIN + help + Enable support for a SPI bus via the Blackfin SPORT peripheral. + + This driver can also be built as a module. If so, the module + will be called spi_bfin_sport. + config SPI_AU1550 tristate "Au1550/Au12x0 SPI Controller" depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index fd2fc5f6505f..0f8c69b6b19e 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_SPI_ALTERA) += spi_altera.o obj-$(CONFIG_SPI_ATMEL) += atmel_spi.o obj-$(CONFIG_SPI_ATH79) += ath79_spi.o obj-$(CONFIG_SPI_BFIN) += spi_bfin5xx.o +obj-$(CONFIG_SPI_BFIN_SPORT) += spi_bfin_sport.o obj-$(CONFIG_SPI_BITBANG) += spi_bitbang.o obj-$(CONFIG_SPI_AU1550) += au1550_spi.o obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o diff --git a/drivers/spi/spi_bfin_sport.c b/drivers/spi/spi_bfin_sport.c new file mode 100644 index 000000000000..e557ff617b11 --- /dev/null +++ b/drivers/spi/spi_bfin_sport.c @@ -0,0 +1,952 @@ +/* + * SPI bus via the Blackfin SPORT peripheral + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Copyright 2009-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define DRV_NAME "bfin-sport-spi" +#define DRV_DESC "SPI bus via the Blackfin SPORT" + +MODULE_AUTHOR("Cliff Cai"); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bfin-sport-spi"); + +enum bfin_sport_spi_state { + START_STATE, + RUNNING_STATE, + DONE_STATE, + ERROR_STATE, +}; + +struct bfin_sport_spi_master_data; + +struct bfin_sport_transfer_ops { + void (*write) (struct bfin_sport_spi_master_data *); + void (*read) (struct bfin_sport_spi_master_data *); + void (*duplex) (struct bfin_sport_spi_master_data *); +}; + +struct bfin_sport_spi_master_data { + /* Driver model hookup */ + struct device *dev; + + /* SPI framework hookup */ + struct spi_master *master; + + /* Regs base of SPI controller */ + struct sport_register __iomem *regs; + int err_irq; + + /* Pin request list */ + u16 *pin_req; + + /* Driver message queue */ + struct workqueue_struct *workqueue; + struct work_struct pump_messages; + spinlock_t lock; + struct list_head queue; + int busy; + bool run; + + /* Message Transfer pump */ + struct tasklet_struct pump_transfers; + + /* Current message transfer state info */ + enum bfin_sport_spi_state state; + struct spi_message *cur_msg; + struct spi_transfer *cur_transfer; + struct bfin_sport_spi_slave_data *cur_chip; + union { + void *tx; + u8 *tx8; + u16 *tx16; + }; + void *tx_end; + union { + void *rx; + u8 *rx8; + u16 *rx16; + }; + void *rx_end; + + int cs_change; + struct bfin_sport_transfer_ops *ops; +}; + +struct bfin_sport_spi_slave_data { + u16 ctl_reg; + u16 baud; + u16 cs_chg_udelay; /* Some devices require > 255usec delay */ + u32 cs_gpio; + u16 idle_tx_val; + struct bfin_sport_transfer_ops *ops; +}; + +static void +bfin_sport_spi_enable(struct bfin_sport_spi_master_data *drv_data) +{ + bfin_write_or(&drv_data->regs->tcr1, TSPEN); + bfin_write_or(&drv_data->regs->rcr1, TSPEN); + SSYNC(); +} + +static void +bfin_sport_spi_disable(struct bfin_sport_spi_master_data *drv_data) +{ + bfin_write_and(&drv_data->regs->tcr1, ~TSPEN); + bfin_write_and(&drv_data->regs->rcr1, ~TSPEN); + SSYNC(); +} + +/* Caculate the SPI_BAUD register value based on input HZ */ +static u16 +bfin_sport_hz_to_spi_baud(u32 speed_hz) +{ + u_long clk, sclk = get_sclk(); + int div = (sclk / (2 * speed_hz)) - 1; + + if (div < 0) + div = 0; + + clk = sclk / (2 * (div + 1)); + + if (clk > speed_hz) + div++; + + return div; +} + +/* Chip select operation functions for cs_change flag */ +static void +bfin_sport_spi_cs_active(struct bfin_sport_spi_slave_data *chip) +{ + gpio_direction_output(chip->cs_gpio, 0); +} + +static void +bfin_sport_spi_cs_deactive(struct bfin_sport_spi_slave_data *chip) +{ + gpio_direction_output(chip->cs_gpio, 1); + /* Move delay here for consistency */ + if (chip->cs_chg_udelay) + udelay(chip->cs_chg_udelay); +} + +static void +bfin_sport_spi_stat_poll_complete(struct bfin_sport_spi_master_data *drv_data) +{ + unsigned long timeout = jiffies + HZ; + while (!(bfin_read(&drv_data->regs->stat) & RXNE)) { + if (!time_before(jiffies, timeout)) + break; + } +} + +static void +bfin_sport_spi_u8_writer(struct bfin_sport_spi_master_data *drv_data) +{ + u16 dummy; + + while (drv_data->tx < drv_data->tx_end) { + bfin_write(&drv_data->regs->tx16, *drv_data->tx8++); + bfin_sport_spi_stat_poll_complete(drv_data); + dummy = bfin_read(&drv_data->regs->rx16); + } +} + +static void +bfin_sport_spi_u8_reader(struct bfin_sport_spi_master_data *drv_data) +{ + u16 tx_val = drv_data->cur_chip->idle_tx_val; + + while (drv_data->rx < drv_data->rx_end) { + bfin_write(&drv_data->regs->tx16, tx_val); + bfin_sport_spi_stat_poll_complete(drv_data); + *drv_data->rx8++ = bfin_read(&drv_data->regs->rx16); + } +} + +static void +bfin_sport_spi_u8_duplex(struct bfin_sport_spi_master_data *drv_data) +{ + while (drv_data->rx < drv_data->rx_end) { + bfin_write(&drv_data->regs->tx16, *drv_data->tx8++); + bfin_sport_spi_stat_poll_complete(drv_data); + *drv_data->rx8++ = bfin_read(&drv_data->regs->rx16); + } +} + +static struct bfin_sport_transfer_ops bfin_sport_transfer_ops_u8 = { + .write = bfin_sport_spi_u8_writer, + .read = bfin_sport_spi_u8_reader, + .duplex = bfin_sport_spi_u8_duplex, +}; + +static void +bfin_sport_spi_u16_writer(struct bfin_sport_spi_master_data *drv_data) +{ + u16 dummy; + + while (drv_data->tx < drv_data->tx_end) { + bfin_write(&drv_data->regs->tx16, *drv_data->tx16++); + bfin_sport_spi_stat_poll_complete(drv_data); + dummy = bfin_read(&drv_data->regs->rx16); + } +} + +static void +bfin_sport_spi_u16_reader(struct bfin_sport_spi_master_data *drv_data) +{ + u16 tx_val = drv_data->cur_chip->idle_tx_val; + + while (drv_data->rx < drv_data->rx_end) { + bfin_write(&drv_data->regs->tx16, tx_val); + bfin_sport_spi_stat_poll_complete(drv_data); + *drv_data->rx16++ = bfin_read(&drv_data->regs->rx16); + } +} + +static void +bfin_sport_spi_u16_duplex(struct bfin_sport_spi_master_data *drv_data) +{ + while (drv_data->rx < drv_data->rx_end) { + bfin_write(&drv_data->regs->tx16, *drv_data->tx16++); + bfin_sport_spi_stat_poll_complete(drv_data); + *drv_data->rx16++ = bfin_read(&drv_data->regs->rx16); + } +} + +static struct bfin_sport_transfer_ops bfin_sport_transfer_ops_u16 = { + .write = bfin_sport_spi_u16_writer, + .read = bfin_sport_spi_u16_reader, + .duplex = bfin_sport_spi_u16_duplex, +}; + +/* stop controller and re-config current chip */ +static void +bfin_sport_spi_restore_state(struct bfin_sport_spi_master_data *drv_data) +{ + struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip; + unsigned int bits = (drv_data->ops == &bfin_sport_transfer_ops_u8 ? 7 : 15); + + bfin_sport_spi_disable(drv_data); + dev_dbg(drv_data->dev, "restoring spi ctl state\n"); + + bfin_write(&drv_data->regs->tcr1, chip->ctl_reg); + bfin_write(&drv_data->regs->tcr2, bits); + bfin_write(&drv_data->regs->tclkdiv, chip->baud); + bfin_write(&drv_data->regs->tfsdiv, bits); + SSYNC(); + + bfin_write(&drv_data->regs->rcr1, chip->ctl_reg & ~(ITCLK | ITFS)); + bfin_write(&drv_data->regs->rcr2, bits); + SSYNC(); + + bfin_sport_spi_cs_active(chip); +} + +/* test if there is more transfer to be done */ +static enum bfin_sport_spi_state +bfin_sport_spi_next_transfer(struct bfin_sport_spi_master_data *drv_data) +{ + struct spi_message *msg = drv_data->cur_msg; + struct spi_transfer *trans = drv_data->cur_transfer; + + /* Move to next transfer */ + if (trans->transfer_list.next != &msg->transfers) { + drv_data->cur_transfer = + list_entry(trans->transfer_list.next, + struct spi_transfer, transfer_list); + return RUNNING_STATE; + } + + return DONE_STATE; +} + +/* + * caller already set message->status; + * dma and pio irqs are blocked give finished message back + */ +static void +bfin_sport_spi_giveback(struct bfin_sport_spi_master_data *drv_data) +{ + struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip; + unsigned long flags; + struct spi_message *msg; + + spin_lock_irqsave(&drv_data->lock, flags); + msg = drv_data->cur_msg; + drv_data->state = START_STATE; + drv_data->cur_msg = NULL; + drv_data->cur_transfer = NULL; + drv_data->cur_chip = NULL; + queue_work(drv_data->workqueue, &drv_data->pump_messages); + spin_unlock_irqrestore(&drv_data->lock, flags); + + if (!drv_data->cs_change) + bfin_sport_spi_cs_deactive(chip); + + if (msg->complete) + msg->complete(msg->context); +} + +static irqreturn_t +sport_err_handler(int irq, void *dev_id) +{ + struct bfin_sport_spi_master_data *drv_data = dev_id; + u16 status; + + dev_dbg(drv_data->dev, "%s enter\n", __func__); + status = bfin_read(&drv_data->regs->stat) & (TOVF | TUVF | ROVF | RUVF); + + if (status) { + bfin_write(&drv_data->regs->stat, status); + SSYNC(); + + bfin_sport_spi_disable(drv_data); + dev_err(drv_data->dev, "status error:%s%s%s%s\n", + status & TOVF ? " TOVF" : "", + status & TUVF ? " TUVF" : "", + status & ROVF ? " ROVF" : "", + status & RUVF ? " RUVF" : ""); + } + + return IRQ_HANDLED; +} + +static void +bfin_sport_spi_pump_transfers(unsigned long data) +{ + struct bfin_sport_spi_master_data *drv_data = (void *)data; + struct spi_message *message = NULL; + struct spi_transfer *transfer = NULL; + struct spi_transfer *previous = NULL; + struct bfin_sport_spi_slave_data *chip = NULL; + unsigned int bits_per_word; + u32 tranf_success = 1; + u32 transfer_speed; + u8 full_duplex = 0; + + /* Get current state information */ + message = drv_data->cur_msg; + transfer = drv_data->cur_transfer; + chip = drv_data->cur_chip; + + if (transfer->speed_hz) + transfer_speed = bfin_sport_hz_to_spi_baud(transfer->speed_hz); + else + transfer_speed = chip->baud; + bfin_write(&drv_data->regs->tclkdiv, transfer_speed); + SSYNC(); + + /* + * if msg is error or done, report it back using complete() callback + */ + + /* Handle for abort */ + if (drv_data->state == ERROR_STATE) { + dev_dbg(drv_data->dev, "transfer: we've hit an error\n"); + message->status = -EIO; + bfin_sport_spi_giveback(drv_data); + return; + } + + /* Handle end of message */ + if (drv_data->state == DONE_STATE) { + dev_dbg(drv_data->dev, "transfer: all done!\n"); + message->status = 0; + bfin_sport_spi_giveback(drv_data); + return; + } + + /* Delay if requested at end of transfer */ + if (drv_data->state == RUNNING_STATE) { + dev_dbg(drv_data->dev, "transfer: still running ...\n"); + previous = list_entry(transfer->transfer_list.prev, + struct spi_transfer, transfer_list); + if (previous->delay_usecs) + udelay(previous->delay_usecs); + } + + if (transfer->len == 0) { + /* Move to next transfer of this msg */ + drv_data->state = bfin_sport_spi_next_transfer(drv_data); + /* Schedule next transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + } + + if (transfer->tx_buf != NULL) { + drv_data->tx = (void *)transfer->tx_buf; + drv_data->tx_end = drv_data->tx + transfer->len; + dev_dbg(drv_data->dev, "tx_buf is %p, tx_end is %p\n", + transfer->tx_buf, drv_data->tx_end); + } else + drv_data->tx = NULL; + + if (transfer->rx_buf != NULL) { + full_duplex = transfer->tx_buf != NULL; + drv_data->rx = transfer->rx_buf; + drv_data->rx_end = drv_data->rx + transfer->len; + dev_dbg(drv_data->dev, "rx_buf is %p, rx_end is %p\n", + transfer->rx_buf, drv_data->rx_end); + } else + drv_data->rx = NULL; + + drv_data->cs_change = transfer->cs_change; + + /* Bits per word setup */ + bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; + if (bits_per_word == 8) + drv_data->ops = &bfin_sport_transfer_ops_u8; + else + drv_data->ops = &bfin_sport_transfer_ops_u16; + + drv_data->state = RUNNING_STATE; + + if (drv_data->cs_change) + bfin_sport_spi_cs_active(chip); + + dev_dbg(drv_data->dev, + "now pumping a transfer: width is %d, len is %d\n", + bits_per_word, transfer->len); + + /* PIO mode write then read */ + dev_dbg(drv_data->dev, "doing IO transfer\n"); + + bfin_sport_spi_enable(drv_data); + if (full_duplex) { + /* full duplex mode */ + BUG_ON((drv_data->tx_end - drv_data->tx) != + (drv_data->rx_end - drv_data->rx)); + drv_data->ops->duplex(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->tx != NULL) { + /* write only half duplex */ + + drv_data->ops->write(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->rx != NULL) { + /* read only half duplex */ + + drv_data->ops->read(drv_data); + if (drv_data->rx != drv_data->rx_end) + tranf_success = 0; + } + bfin_sport_spi_disable(drv_data); + + if (!tranf_success) { + dev_dbg(drv_data->dev, "IO write error!\n"); + drv_data->state = ERROR_STATE; + } else { + /* Update total byte transfered */ + message->actual_length += transfer->len; + /* Move to next transfer of this msg */ + drv_data->state = bfin_sport_spi_next_transfer(drv_data); + if (drv_data->cs_change) + bfin_sport_spi_cs_deactive(chip); + } + + /* Schedule next transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); +} + +/* pop a msg from queue and kick off real transfer */ +static void +bfin_sport_spi_pump_messages(struct work_struct *work) +{ + struct bfin_sport_spi_master_data *drv_data; + unsigned long flags; + struct spi_message *next_msg; + + drv_data = container_of(work, struct bfin_sport_spi_master_data, pump_messages); + + /* Lock queue and check for queue work */ + spin_lock_irqsave(&drv_data->lock, flags); + if (list_empty(&drv_data->queue) || !drv_data->run) { + /* pumper kicked off but no work to do */ + drv_data->busy = 0; + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + } + + /* Make sure we are not already running a message */ + if (drv_data->cur_msg) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return; + } + + /* Extract head of queue */ + next_msg = list_entry(drv_data->queue.next, + struct spi_message, queue); + + drv_data->cur_msg = next_msg; + + /* Setup the SSP using the per chip configuration */ + drv_data->cur_chip = spi_get_ctldata(drv_data->cur_msg->spi); + + list_del_init(&drv_data->cur_msg->queue); + + /* Initialize message state */ + drv_data->cur_msg->state = START_STATE; + drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next, + struct spi_transfer, transfer_list); + bfin_sport_spi_restore_state(drv_data); + dev_dbg(drv_data->dev, "got a message to pump, " + "state is set to: baud %d, cs_gpio %i, ctl 0x%x\n", + drv_data->cur_chip->baud, drv_data->cur_chip->cs_gpio, + drv_data->cur_chip->ctl_reg); + + dev_dbg(drv_data->dev, + "the first transfer len is %d\n", + drv_data->cur_transfer->len); + + /* Mark as busy and launch transfers */ + tasklet_schedule(&drv_data->pump_transfers); + + drv_data->busy = 1; + spin_unlock_irqrestore(&drv_data->lock, flags); +} + +/* + * got a msg to transfer, queue it in drv_data->queue. + * And kick off message pumper + */ +static int +bfin_sport_spi_transfer(struct spi_device *spi, struct spi_message *msg) +{ + struct bfin_sport_spi_master_data *drv_data = spi_master_get_devdata(spi->master); + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + + if (!drv_data->run) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return -ESHUTDOWN; + } + + msg->actual_length = 0; + msg->status = -EINPROGRESS; + msg->state = START_STATE; + + dev_dbg(&spi->dev, "adding an msg in transfer()\n"); + list_add_tail(&msg->queue, &drv_data->queue); + + if (drv_data->run && !drv_data->busy) + queue_work(drv_data->workqueue, &drv_data->pump_messages); + + spin_unlock_irqrestore(&drv_data->lock, flags); + + return 0; +} + +/* Called every time common spi devices change state */ +static int +bfin_sport_spi_setup(struct spi_device *spi) +{ + struct bfin_sport_spi_slave_data *chip, *first = NULL; + int ret; + + /* Only alloc (or use chip_info) on first setup */ + chip = spi_get_ctldata(spi); + if (chip == NULL) { + struct bfin5xx_spi_chip *chip_info; + + chip = first = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + /* platform chip_info isn't required */ + chip_info = spi->controller_data; + if (chip_info) { + /* + * DITFS and TDTYPE are only thing we don't set, but + * they probably shouldn't be changed by people. + */ + if (chip_info->ctl_reg || chip_info->enable_dma) { + ret = -EINVAL; + dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields"); + goto error; + } + chip->cs_chg_udelay = chip_info->cs_chg_udelay; + chip->idle_tx_val = chip_info->idle_tx_val; + spi->bits_per_word = chip_info->bits_per_word; + } + } + + if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { + ret = -EINVAL; + goto error; + } + + /* translate common spi framework into our register + * following configure contents are same for tx and rx. + */ + + if (spi->mode & SPI_CPHA) + chip->ctl_reg &= ~TCKFE; + else + chip->ctl_reg |= TCKFE; + + if (spi->mode & SPI_LSB_FIRST) + chip->ctl_reg |= TLSBIT; + else + chip->ctl_reg &= ~TLSBIT; + + /* Sport in master mode */ + chip->ctl_reg |= ITCLK | ITFS | TFSR | LATFS | LTFS; + + chip->baud = bfin_sport_hz_to_spi_baud(spi->max_speed_hz); + + chip->cs_gpio = spi->chip_select; + ret = gpio_request(chip->cs_gpio, spi->modalias); + if (ret) + goto error; + + dev_dbg(&spi->dev, "setup spi chip %s, width is %d\n", + spi->modalias, spi->bits_per_word); + dev_dbg(&spi->dev, "ctl_reg is 0x%x, GPIO is %i\n", + chip->ctl_reg, spi->chip_select); + + spi_set_ctldata(spi, chip); + + bfin_sport_spi_cs_deactive(chip); + + return ret; + + error: + kfree(first); + return ret; +} + +/* + * callback for spi framework. + * clean driver specific data + */ +static void +bfin_sport_spi_cleanup(struct spi_device *spi) +{ + struct bfin_sport_spi_slave_data *chip = spi_get_ctldata(spi); + + if (!chip) + return; + + gpio_free(chip->cs_gpio); + + kfree(chip); +} + +static int +bfin_sport_spi_init_queue(struct bfin_sport_spi_master_data *drv_data) +{ + INIT_LIST_HEAD(&drv_data->queue); + spin_lock_init(&drv_data->lock); + + drv_data->run = false; + drv_data->busy = 0; + + /* init transfer tasklet */ + tasklet_init(&drv_data->pump_transfers, + bfin_sport_spi_pump_transfers, (unsigned long)drv_data); + + /* init messages workqueue */ + INIT_WORK(&drv_data->pump_messages, bfin_sport_spi_pump_messages); + drv_data->workqueue = + create_singlethread_workqueue(dev_name(drv_data->master->dev.parent)); + if (drv_data->workqueue == NULL) + return -EBUSY; + + return 0; +} + +static int +bfin_sport_spi_start_queue(struct bfin_sport_spi_master_data *drv_data) +{ + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + + if (drv_data->run || drv_data->busy) { + spin_unlock_irqrestore(&drv_data->lock, flags); + return -EBUSY; + } + + drv_data->run = true; + drv_data->cur_msg = NULL; + drv_data->cur_transfer = NULL; + drv_data->cur_chip = NULL; + spin_unlock_irqrestore(&drv_data->lock, flags); + + queue_work(drv_data->workqueue, &drv_data->pump_messages); + + return 0; +} + +static inline int +bfin_sport_spi_stop_queue(struct bfin_sport_spi_master_data *drv_data) +{ + unsigned long flags; + unsigned limit = 500; + int status = 0; + + spin_lock_irqsave(&drv_data->lock, flags); + + /* + * This is a bit lame, but is optimized for the common execution path. + * A wait_queue on the drv_data->busy could be used, but then the common + * execution path (pump_messages) would be required to call wake_up or + * friends on every SPI message. Do this instead + */ + drv_data->run = false; + while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { + spin_unlock_irqrestore(&drv_data->lock, flags); + msleep(10); + spin_lock_irqsave(&drv_data->lock, flags); + } + + if (!list_empty(&drv_data->queue) || drv_data->busy) + status = -EBUSY; + + spin_unlock_irqrestore(&drv_data->lock, flags); + + return status; +} + +static inline int +bfin_sport_spi_destroy_queue(struct bfin_sport_spi_master_data *drv_data) +{ + int status; + + status = bfin_sport_spi_stop_queue(drv_data); + if (status) + return status; + + destroy_workqueue(drv_data->workqueue); + + return 0; +} + +static int __devinit +bfin_sport_spi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct bfin5xx_spi_master *platform_info; + struct spi_master *master; + struct resource *res, *ires; + struct bfin_sport_spi_master_data *drv_data; + int status; + + platform_info = dev->platform_data; + + /* Allocate master with space for drv_data */ + master = spi_alloc_master(dev, sizeof(*master) + 16); + if (!master) { + dev_err(dev, "cannot alloc spi_master\n"); + return -ENOMEM; + } + + drv_data = spi_master_get_devdata(master); + drv_data->master = master; + drv_data->dev = dev; + drv_data->pin_req = platform_info->pin_req; + + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST; + master->bus_num = pdev->id; + master->num_chipselect = platform_info->num_chipselect; + master->cleanup = bfin_sport_spi_cleanup; + master->setup = bfin_sport_spi_setup; + master->transfer = bfin_sport_spi_transfer; + + /* Find and map our resources */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(dev, "cannot get IORESOURCE_MEM\n"); + status = -ENOENT; + goto out_error_get_res; + } + + drv_data->regs = ioremap(res->start, resource_size(res)); + if (drv_data->regs == NULL) { + dev_err(dev, "cannot map registers\n"); + status = -ENXIO; + goto out_error_ioremap; + } + + ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!ires) { + dev_err(dev, "cannot get IORESOURCE_IRQ\n"); + status = -ENODEV; + goto out_error_get_ires; + } + drv_data->err_irq = ires->start; + + /* Initial and start queue */ + status = bfin_sport_spi_init_queue(drv_data); + if (status) { + dev_err(dev, "problem initializing queue\n"); + goto out_error_queue_alloc; + } + + status = bfin_sport_spi_start_queue(drv_data); + if (status) { + dev_err(dev, "problem starting queue\n"); + goto out_error_queue_alloc; + } + + status = request_irq(drv_data->err_irq, sport_err_handler, + 0, "sport_spi_err", drv_data); + if (status) { + dev_err(dev, "unable to request sport err irq\n"); + goto out_error_irq; + } + + status = peripheral_request_list(drv_data->pin_req, DRV_NAME); + if (status) { + dev_err(dev, "requesting peripherals failed\n"); + goto out_error_peripheral; + } + + /* Register with the SPI framework */ + platform_set_drvdata(pdev, drv_data); + status = spi_register_master(master); + if (status) { + dev_err(dev, "problem registering spi master\n"); + goto out_error_master; + } + + dev_info(dev, "%s, regs_base@%p\n", DRV_DESC, drv_data->regs); + return 0; + + out_error_master: + peripheral_free_list(drv_data->pin_req); + out_error_peripheral: + free_irq(drv_data->err_irq, drv_data); + out_error_irq: + out_error_queue_alloc: + bfin_sport_spi_destroy_queue(drv_data); + out_error_get_ires: + iounmap(drv_data->regs); + out_error_ioremap: + out_error_get_res: + spi_master_put(master); + + return status; +} + +/* stop hardware and remove the driver */ +static int __devexit +bfin_sport_spi_remove(struct platform_device *pdev) +{ + struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); + int status = 0; + + if (!drv_data) + return 0; + + /* Remove the queue */ + status = bfin_sport_spi_destroy_queue(drv_data); + if (status) + return status; + + /* Disable the SSP at the peripheral and SOC level */ + bfin_sport_spi_disable(drv_data); + + /* Disconnect from the SPI framework */ + spi_unregister_master(drv_data->master); + + peripheral_free_list(drv_data->pin_req); + + /* Prevent double remove */ + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int +bfin_sport_spi_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); + int status; + + status = bfin_sport_spi_stop_queue(drv_data); + if (status) + return status; + + /* stop hardware */ + bfin_sport_spi_disable(drv_data); + + return status; +} + +static int +bfin_sport_spi_resume(struct platform_device *pdev) +{ + struct bfin_sport_spi_master_data *drv_data = platform_get_drvdata(pdev); + int status; + + /* Enable the SPI interface */ + bfin_sport_spi_enable(drv_data); + + /* Start the queue running */ + status = bfin_sport_spi_start_queue(drv_data); + if (status) + dev_err(drv_data->dev, "problem resuming queue\n"); + + return status; +} +#else +# define bfin_sport_spi_suspend NULL +# define bfin_sport_spi_resume NULL +#endif + +static struct platform_driver bfin_sport_spi_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = bfin_sport_spi_probe, + .remove = __devexit_p(bfin_sport_spi_remove), + .suspend = bfin_sport_spi_suspend, + .resume = bfin_sport_spi_resume, +}; + +static int __init bfin_sport_spi_init(void) +{ + return platform_driver_register(&bfin_sport_spi_driver); +} +module_init(bfin_sport_spi_init); + +static void __exit bfin_sport_spi_exit(void) +{ + platform_driver_unregister(&bfin_sport_spi_driver); +} +module_exit(bfin_sport_spi_exit); -- cgit v1.2.3 From 9a3865b185e77d1a4ca2d8356e37c19b78168961 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 27 May 2011 09:29:32 +0200 Subject: x86, asm: Clean up desc.h a bit I have looked at this file and found it rather ugly - improve readability a bit. No change in functionality. Link: http://lkml.kernel.org/n/tip-incpt6y26yd8586idx65t9ll@git.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/include/asm/desc.h | 152 ++++++++++++++++++++++---------------------- 1 file changed, 76 insertions(+), 76 deletions(-) diff --git a/arch/x86/include/asm/desc.h b/arch/x86/include/asm/desc.h index 617bd56b3070..7b439d9aea2a 100644 --- a/arch/x86/include/asm/desc.h +++ b/arch/x86/include/asm/desc.h @@ -4,30 +4,33 @@ #include #include #include + #include -static inline void fill_ldt(struct desc_struct *desc, - const struct user_desc *info) -{ - desc->limit0 = info->limit & 0x0ffff; - desc->base0 = info->base_addr & 0x0000ffff; - - desc->base1 = (info->base_addr & 0x00ff0000) >> 16; - desc->type = (info->read_exec_only ^ 1) << 1; - desc->type |= info->contents << 2; - desc->s = 1; - desc->dpl = 0x3; - desc->p = info->seg_not_present ^ 1; - desc->limit = (info->limit & 0xf0000) >> 16; - desc->avl = info->useable; - desc->d = info->seg_32bit; - desc->g = info->limit_in_pages; - desc->base2 = (info->base_addr & 0xff000000) >> 24; +static inline void fill_ldt(struct desc_struct *desc, const struct user_desc *info) +{ + desc->limit0 = info->limit & 0x0ffff; + + desc->base0 = (info->base_addr & 0x0000ffff); + desc->base1 = (info->base_addr & 0x00ff0000) >> 16; + + desc->type = (info->read_exec_only ^ 1) << 1; + desc->type |= info->contents << 2; + + desc->s = 1; + desc->dpl = 0x3; + desc->p = info->seg_not_present ^ 1; + desc->limit = (info->limit & 0xf0000) >> 16; + desc->avl = info->useable; + desc->d = info->seg_32bit; + desc->g = info->limit_in_pages; + + desc->base2 = (info->base_addr & 0xff000000) >> 24; /* * Don't allow setting of the lm bit. It is useless anyway * because 64bit system calls require __USER_CS: */ - desc->l = 0; + desc->l = 0; } extern struct desc_ptr idt_descr; @@ -36,6 +39,7 @@ extern gate_desc idt_table[]; struct gdt_page { struct desc_struct gdt[GDT_ENTRIES]; } __attribute__((aligned(PAGE_SIZE))); + DECLARE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page); static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu) @@ -48,16 +52,16 @@ static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu) static inline void pack_gate(gate_desc *gate, unsigned type, unsigned long func, unsigned dpl, unsigned ist, unsigned seg) { - gate->offset_low = PTR_LOW(func); - gate->segment = __KERNEL_CS; - gate->ist = ist; - gate->p = 1; - gate->dpl = dpl; - gate->zero0 = 0; - gate->zero1 = 0; - gate->type = type; - gate->offset_middle = PTR_MIDDLE(func); - gate->offset_high = PTR_HIGH(func); + gate->offset_low = PTR_LOW(func); + gate->segment = __KERNEL_CS; + gate->ist = ist; + gate->p = 1; + gate->dpl = dpl; + gate->zero0 = 0; + gate->zero1 = 0; + gate->type = type; + gate->offset_middle = PTR_MIDDLE(func); + gate->offset_high = PTR_HIGH(func); } #else @@ -66,8 +70,7 @@ static inline void pack_gate(gate_desc *gate, unsigned char type, unsigned short seg) { gate->a = (seg << 16) | (base & 0xffff); - gate->b = (base & 0xffff0000) | - (((0x80 | type | (dpl << 5)) & 0xff) << 8); + gate->b = (base & 0xffff0000) | (((0x80 | type | (dpl << 5)) & 0xff) << 8); } #endif @@ -75,31 +78,29 @@ static inline void pack_gate(gate_desc *gate, unsigned char type, static inline int desc_empty(const void *ptr) { const u32 *desc = ptr; + return !(desc[0] | desc[1]); } #ifdef CONFIG_PARAVIRT #include #else -#define load_TR_desc() native_load_tr_desc() -#define load_gdt(dtr) native_load_gdt(dtr) -#define load_idt(dtr) native_load_idt(dtr) -#define load_tr(tr) asm volatile("ltr %0"::"m" (tr)) -#define load_ldt(ldt) asm volatile("lldt %0"::"m" (ldt)) - -#define store_gdt(dtr) native_store_gdt(dtr) -#define store_idt(dtr) native_store_idt(dtr) -#define store_tr(tr) (tr = native_store_tr()) - -#define load_TLS(t, cpu) native_load_tls(t, cpu) -#define set_ldt native_set_ldt - -#define write_ldt_entry(dt, entry, desc) \ - native_write_ldt_entry(dt, entry, desc) -#define write_gdt_entry(dt, entry, desc, type) \ - native_write_gdt_entry(dt, entry, desc, type) -#define write_idt_entry(dt, entry, g) \ - native_write_idt_entry(dt, entry, g) +#define load_TR_desc() native_load_tr_desc() +#define load_gdt(dtr) native_load_gdt(dtr) +#define load_idt(dtr) native_load_idt(dtr) +#define load_tr(tr) asm volatile("ltr %0"::"m" (tr)) +#define load_ldt(ldt) asm volatile("lldt %0"::"m" (ldt)) + +#define store_gdt(dtr) native_store_gdt(dtr) +#define store_idt(dtr) native_store_idt(dtr) +#define store_tr(tr) (tr = native_store_tr()) + +#define load_TLS(t, cpu) native_load_tls(t, cpu) +#define set_ldt native_set_ldt + +#define write_ldt_entry(dt, entry, desc) native_write_ldt_entry(dt, entry, desc) +#define write_gdt_entry(dt, entry, desc, type) native_write_gdt_entry(dt, entry, desc, type) +#define write_idt_entry(dt, entry, g) native_write_idt_entry(dt, entry, g) static inline void paravirt_alloc_ldt(struct desc_struct *ldt, unsigned entries) { @@ -112,33 +113,27 @@ static inline void paravirt_free_ldt(struct desc_struct *ldt, unsigned entries) #define store_ldt(ldt) asm("sldt %0" : "=m"(ldt)) -static inline void native_write_idt_entry(gate_desc *idt, int entry, - const gate_desc *gate) +static inline void native_write_idt_entry(gate_desc *idt, int entry, const gate_desc *gate) { memcpy(&idt[entry], gate, sizeof(*gate)); } -static inline void native_write_ldt_entry(struct desc_struct *ldt, int entry, - const void *desc) +static inline void native_write_ldt_entry(struct desc_struct *ldt, int entry, const void *desc) { memcpy(&ldt[entry], desc, 8); } -static inline void native_write_gdt_entry(struct desc_struct *gdt, int entry, - const void *desc, int type) +static inline void +native_write_gdt_entry(struct desc_struct *gdt, int entry, const void *desc, int type) { unsigned int size; + switch (type) { - case DESC_TSS: - size = sizeof(tss_desc); - break; - case DESC_LDT: - size = sizeof(ldt_desc); - break; - default: - size = sizeof(struct desc_struct); - break; + case DESC_TSS: size = sizeof(tss_desc); break; + case DESC_LDT: size = sizeof(ldt_desc); break; + default: size = sizeof(*gdt); break; } + memcpy(&gdt[entry], desc, size); } @@ -154,20 +149,21 @@ static inline void pack_descriptor(struct desc_struct *desc, unsigned long base, } -static inline void set_tssldt_descriptor(void *d, unsigned long addr, - unsigned type, unsigned size) +static inline void set_tssldt_descriptor(void *d, unsigned long addr, unsigned type, unsigned size) { #ifdef CONFIG_X86_64 struct ldttss_desc64 *desc = d; + memset(desc, 0, sizeof(*desc)); - desc->limit0 = size & 0xFFFF; - desc->base0 = PTR_LOW(addr); - desc->base1 = PTR_MIDDLE(addr) & 0xFF; - desc->type = type; - desc->p = 1; - desc->limit1 = (size >> 16) & 0xF; - desc->base2 = (PTR_MIDDLE(addr) >> 8) & 0xFF; - desc->base3 = PTR_HIGH(addr); + + desc->limit0 = size & 0xFFFF; + desc->base0 = PTR_LOW(addr); + desc->base1 = PTR_MIDDLE(addr) & 0xFF; + desc->type = type; + desc->p = 1; + desc->limit1 = (size >> 16) & 0xF; + desc->base2 = (PTR_MIDDLE(addr) >> 8) & 0xFF; + desc->base3 = PTR_HIGH(addr); #else pack_descriptor((struct desc_struct *)d, addr, size, 0x80 | type, 0); #endif @@ -237,14 +233,16 @@ static inline void native_store_idt(struct desc_ptr *dtr) static inline unsigned long native_store_tr(void) { unsigned long tr; + asm volatile("str %0":"=r" (tr)); + return tr; } static inline void native_load_tls(struct thread_struct *t, unsigned int cpu) { - unsigned int i; struct desc_struct *gdt = get_cpu_gdt_table(cpu); + unsigned int i; for (i = 0; i < GDT_ENTRY_TLS_ENTRIES; i++) gdt[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i]; @@ -313,6 +311,7 @@ static inline void _set_gate(int gate, unsigned type, void *addr, unsigned dpl, unsigned ist, unsigned seg) { gate_desc s; + pack_gate(&s, type, (unsigned long)addr, dpl, ist, seg); /* * does not need to be atomic because it is only done once at @@ -343,8 +342,9 @@ static inline void alloc_system_vector(int vector) set_bit(vector, used_vectors); if (first_system_vector > vector) first_system_vector = vector; - } else + } else { BUG(); + } } static inline void alloc_intr_gate(unsigned int n, void *addr) -- cgit v1.2.3 From 4258781ac720ff8f2fa6c34c1bd06a0cb8562188 Mon Sep 17 00:00:00 2001 From: Sergey Senozhatsky Date: Tue, 24 May 2011 07:28:31 -0400 Subject: hwmon: (coretemp) Initialize sysfs attributes Initialize sysfs attrs before device_create_file() call to suppress lockdep_init_map() warning: [ 3.653628] WARNING: at kernel/lockdep.c:2885 lockdep_init_map+0xea/0x43c() [ 3.653698] Modules linked in: [ 3.654835] Pid: 1, comm: swapper Not tainted 2.6.39-dbg-git8-05624-g46187f8 #576 [ 3.656014] Call Trace: [ 3.657139] [] warn_slowpath_common+0x7e/0x96 [ 3.658298] [] warn_slowpath_null+0x15/0x17 [ 3.659460] [] lockdep_init_map+0xea/0x43c [ 3.660616] [] sysfs_add_file_mode+0x5d/0xa8 [ 3.661785] [] sysfs_add_file+0xc/0xe [ 3.662929] [] sysfs_create_file+0x23/0x25 [ 3.664045] [] device_create_file+0x14/0x16 [ 3.665172] [] coretemp_probe+0xf9/0x185 [ 3.666306] [] platform_drv_probe+0x12/0x14 [ 3.667420] [] driver_probe_device+0xb0/0x14b [ 3.668542] [] __device_attach+0x35/0x3a [ 3.669710] [] ? __driver_attach+0x7c/0x7c [ 3.670816] [] bus_for_each_drv+0x54/0x88 [ 3.671921] [] device_attach+0x77/0x9b [ 3.673027] [] bus_probe_device+0x22/0x39 [ 3.674137] [] device_add+0x3c1/0x550 [ 3.675249] [] ? dev_set_name+0x3c/0x3e [ 3.676371] [] platform_device_add+0x10c/0x156 [ 3.677491] [] get_core_online+0xab/0x16e [ 3.678608] [] coretemp_init+0x4b/0x80 [ 3.679724] [] ? hwmon_init+0xee/0xee [ 3.680853] [] do_one_initcall+0x7a/0x13c [ 3.681975] [] kernel_init+0xe1/0x15b [ 3.683081] [] kernel_thread_helper+0x4/0x10 [ 3.684174] [] ? finish_task_switch+0x76/0xf0 [ 3.685266] [] ? retint_restore_args+0x13/0x13 [ 3.686356] [] ? start_kernel+0x3ee/0x3ee [ 3.687425] [] ? gs_change+0x13/0x13 [ 3.688489] ---[ end trace 7392ad3e6a92ae39 ]--- Signed-off-by: Sergey Senozhatsky Signed-off-by: Guenter Roeck --- drivers/hwmon/coretemp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 9577c432e77f..d9e70ac413a5 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -350,6 +350,7 @@ static int get_pkg_tjmax(unsigned int cpu, struct device *dev) static int create_name_attr(struct platform_data *pdata, struct device *dev) { + sysfs_attr_init(&pdata->name_attr.attr); pdata->name_attr.attr.name = "name"; pdata->name_attr.attr.mode = S_IRUGO; pdata->name_attr.show = show_name; @@ -372,6 +373,7 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev, for (i = 0; i < MAX_ATTRS; i++) { snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, names[i], attr_no); + sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr); tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i]; tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO; tdata->sd_attrs[i].dev_attr.show = rd_ptr[i]; -- cgit v1.2.3 From 6777b9e47e4daf7116ec12b69e9b5cc980809217 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Mon, 23 May 2011 13:52:35 -0700 Subject: hwmon: (coretemp) Update comments describing the handling of HT CPUs Update comments describing the handling of HT CPUs based on review feedback. Signed-off-by: Guenter Roeck Cc: Fenghua Yu Cc: Durgadoss R Acked-by: Jean Delvare --- drivers/hwmon/coretemp.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index d9e70ac413a5..833d51ff43b3 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -511,8 +511,8 @@ static int create_core_data(struct platform_data *pdata, /* * Provide a single set of attributes for all HT siblings of a core * to avoid duplicate sensors (the processor ID and core ID of all - * HT siblings of a core is the same). - * Skip if a HT sibling of this core is already online. + * HT siblings of a core are the same). + * Skip if a HT sibling of this core is already registered. * This is not an error. */ if (pdata->core_data[attr_no] != NULL) @@ -772,10 +772,10 @@ static void __cpuinit put_core_offline(unsigned int cpu) coretemp_remove_core(pdata, &pdev->dev, indx); /* - * If a core is taken offline, but a HT sibling of the same core is - * still online, register the alternate sibling. This ensures that - * exactly one set of attributes is provided as long as at least one - * HT sibling of a core is online. + * If a HT sibling of a core is taken offline, but another HT sibling + * of the same core is still online, register the alternate sibling. + * This ensures that exactly one set of attributes is provided as long + * as at least one HT sibling of a core is online. */ for_each_sibling(i, cpu) { if (i != cpu) { -- cgit v1.2.3 From eec752b2b99c794766926a9bac59b0d7df5b09c2 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 24 May 2011 12:16:40 -0700 Subject: hwmon: (pmbus) Initialize sysfs attributes Initialize sysfs attrs before device_create_file() call to suppress lockdep_init_map() warning: WARNING: at kernel/lockdep.c:2701 lockdep_init_map+0x12d/0x140() Reviewed-by: Robert Coulson Signed-off-by: Guenter Roeck Cc: stable@kernel.org # .39.x --- drivers/hwmon/pmbus_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c index 98799bab69ce..354770ed3186 100644 --- a/drivers/hwmon/pmbus_core.c +++ b/drivers/hwmon/pmbus_core.c @@ -707,6 +707,7 @@ do { \ struct sensor_device_attribute *a \ = &data->_type##s[data->num_##_type##s].attribute; \ BUG_ON(data->num_attributes >= data->max_attributes); \ + sysfs_attr_init(&a->dev_attr.attr); \ a->dev_attr.attr.name = _name; \ a->dev_attr.attr.mode = _mode; \ a->dev_attr.show = _show; \ -- cgit v1.2.3 From 582e1b270f6db93007f9af86d4f28fdad3da0505 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 26 May 2011 06:01:54 -0400 Subject: hwmon: (coretemp) Fix section mismatch chk_ucode_version() is only called from coretemp_probe() which is __devinit, so it can be marked __devinit too. Signed-off-by: Jean Delvare Cc: Durgadoss R Cc: Fenghua Yu Cc: Guenter Roeck Signed-off-by: Guenter Roeck --- drivers/hwmon/coretemp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 833d51ff43b3..de3d2465fe24 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -424,7 +424,7 @@ static void update_ttarget(__u8 cpu_model, struct temp_data *tdata, } } -static int chk_ucode_version(struct platform_device *pdev) +static int __devinit chk_ucode_version(struct platform_device *pdev) { struct cpuinfo_x86 *c = &cpu_data(pdev->id); int err; -- cgit v1.2.3 From 2c6082341d1896218ca974cc2bb6876e36fcba5c Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 30 Mar 2011 06:29:12 +0900 Subject: regulator: When constraining modes fall back to higher power modes If a mode requested by a consumer is not allowed by constraints automatically fall back to a higher power mode if possible. This ensures that consumers get at least the output they requested while allowing machine drivers to transparently limit lower power modes if required. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 0fae51c4845a..7104404a9fa7 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -197,9 +197,9 @@ static int regulator_check_current_limit(struct regulator_dev *rdev, } /* operating mode constraint check */ -static int regulator_check_mode(struct regulator_dev *rdev, int mode) +static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode) { - switch (mode) { + switch (*mode) { case REGULATOR_MODE_FAST: case REGULATOR_MODE_NORMAL: case REGULATOR_MODE_IDLE: @@ -217,11 +217,17 @@ static int regulator_check_mode(struct regulator_dev *rdev, int mode) rdev_err(rdev, "operation not allowed\n"); return -EPERM; } - if (!(rdev->constraints->valid_modes_mask & mode)) { - rdev_err(rdev, "invalid mode %x\n", mode); - return -EINVAL; + + /* The modes are bitmasks, the most power hungry modes having + * the lowest values. If the requested mode isn't supported + * try higher modes. */ + while (*mode) { + if (rdev->constraints->valid_modes_mask & *mode) + return 0; + *mode /= 2; } - return 0; + + return -EINVAL; } /* dynamic regulator mode switching constraint check */ @@ -612,7 +618,7 @@ static void drms_uA_update(struct regulator_dev *rdev) output_uV, current_uA); /* check the new mode is allowed */ - err = regulator_check_mode(rdev, mode); + err = regulator_mode_constrain(rdev, &mode); if (err == 0) rdev->desc->ops->set_mode(rdev, mode); } @@ -2005,7 +2011,7 @@ int regulator_set_mode(struct regulator *regulator, unsigned int mode) } /* constraints check */ - ret = regulator_check_mode(rdev, mode); + ret = regulator_mode_constrain(rdev, mode); if (ret < 0) goto out; @@ -2116,7 +2122,7 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, output_uV, total_uA_load); - ret = regulator_check_mode(rdev, mode); + ret = regulator_mode_constrain(rdev, &mode); if (ret < 0) { rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", total_uA_load, input_uV, output_uV); -- cgit v1.2.3 From f0f060bdd55e36adff4cc80b2a4ed026774db7a9 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 29 Mar 2011 17:54:58 +0800 Subject: regulator: Add missing platform_set_drvdata in tps6105x_regulator_probe Otherwise, calling platform_get_drvdata in tps6105x_regulator_remove returns NULL. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/tps6105x-regulator.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/regulator/tps6105x-regulator.c b/drivers/regulator/tps6105x-regulator.c index a4d7f4540c18..1011873896dc 100644 --- a/drivers/regulator/tps6105x-regulator.c +++ b/drivers/regulator/tps6105x-regulator.c @@ -158,6 +158,7 @@ static int __devinit tps6105x_regulator_probe(struct platform_device *pdev) "failed to register regulator\n"); return ret; } + platform_set_drvdata(pdev, tps6105x); return 0; } -- cgit v1.2.3 From 21657ebf868b9c7c6c0cab15a6797c3f1af64295 Mon Sep 17 00:00:00 2001 From: Saquib Herman Date: Fri, 1 Apr 2011 10:22:42 +0530 Subject: regulator: twl: fix twl6030 enable/disable TWL6030 requires an additional register write to CFG_STATE register to explicitly state that the regulator is in a certain state. Merely associating the regulator with the group is not enough. Add the required register field definitions and fix the handling for TWL6030 enable/disable. Signed-off-by: Nishanth Menon Signed-off-by: Saquib Herman Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 6a292852a358..2c6660583769 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -76,6 +76,11 @@ struct twlreg_info { #define VREG_BC_PROC 3 #define VREG_BC_CLK_RST 4 +/* TWL6030 LDO register values for CFG_STATE */ +#define TWL6030_CFG_STATE_OFF 0x00 +#define TWL6030_CFG_STATE_ON 0x01 +#define TWL6030_CFG_STATE_GRP_SHIFT 5 + static inline int twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset) { @@ -149,6 +154,11 @@ static int twlreg_enable(struct regulator_dev *rdev) ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + if (!ret && twl_class_is_6030()) + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, + grp << TWL6030_CFG_STATE_GRP_SHIFT | + TWL6030_CFG_STATE_ON); + udelay(info->delay); return ret; @@ -158,17 +168,36 @@ static int twlreg_disable(struct regulator_dev *rdev) { struct twlreg_info *info = rdev_get_drvdata(rdev); int grp; + int ret; grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); if (grp < 0) return grp; + /* For 6030, set the off state for all grps enabled */ + if (twl_class_is_6030()) { + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, + (grp & (P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030)) << + TWL6030_CFG_STATE_GRP_SHIFT | + TWL6030_CFG_STATE_OFF); + if (ret) + return ret; + } + if (twl_class_is_4030()) grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030); else grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030); - return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); + + /* Next, associate cleared grp in state register */ + if (!ret && twl_class_is_6030()) + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, + grp << TWL6030_CFG_STATE_GRP_SHIFT | + TWL6030_CFG_STATE_OFF); + + return ret; } static int twlreg_get_status(struct regulator_dev *rdev) -- cgit v1.2.3 From 776dc923f5c9cd0eea61475ed61350e377ad98b5 Mon Sep 17 00:00:00 2001 From: Saquib Herman Date: Fri, 1 Apr 2011 10:22:43 +0530 Subject: regulator: twl: remap has no meaning for 6030 TWL6030 does not have remap register. The current implementation causes value of remap to be written to state register, accidentally causing the regulators which are probed to be switched on as well. This is wrong as regulators should be controllable based on calls to enable/disable for TWL regulator framework. Further, the values initialized make no sense as well. We hence remove this from the initalizers and also write to remap register only if the TWL is 4030. Signed-off-by: Nishanth Menon Signed-off-by: Saquib Herman Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 37 +++++++++++++++++-------------------- 1 file changed, 17 insertions(+), 20 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 2c6660583769..821fd4206ade 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -517,10 +517,9 @@ static struct regulator_ops twl6030_fixed_resource = { remap_conf) \ TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ remap_conf, TWL4030) -#define TWL6030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ - remap_conf) \ +#define TWL6030_FIXED_LDO(label, offset, mVolts, num, turnon_delay) \ TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ - remap_conf, TWL6030) + 0x0, TWL6030) #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) { \ .base = offset, \ @@ -539,13 +538,11 @@ static struct regulator_ops twl6030_fixed_resource = { }, \ } -#define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts, num, \ - remap_conf) { \ +#define TWL6030_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts, num) { \ .base = offset, \ .id = num, \ .min_mV = min_mVolts, \ .max_mV = max_mVolts, \ - .remap = remap_conf, \ .desc = { \ .name = #label, \ .id = TWL6030_REG_##label, \ @@ -574,11 +571,10 @@ static struct regulator_ops twl6030_fixed_resource = { }, \ } -#define TWL6030_FIXED_RESOURCE(label, offset, num, turnon_delay, remap_conf) { \ +#define TWL6030_FIXED_RESOURCE(label, offset, num, turnon_delay) { \ .base = offset, \ .id = num, \ .delay = turnon_delay, \ - .remap = remap_conf, \ .desc = { \ .name = #label, \ .id = TWL6030_REG_##label, \ @@ -618,17 +614,17 @@ static struct twlreg_info twl_regs[] = { /* 6030 REG with base as PMC Slave Misc : 0x0030 */ /* Turnon-delay and remap configuration values for 6030 are not verified since the specification is not public */ - TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1000, 3300, 1, 0x21), - TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 1000, 3300, 2, 0x21), - TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 1000, 3300, 3, 0x21), - TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 1000, 3300, 4, 0x21), - TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 1000, 3300, 5, 0x21), - TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 1000, 3300, 7, 0x21), - TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0, 0x21), - TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0, 0x21), - TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0, 0x21), - TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0, 0x21), - TWL6030_FIXED_RESOURCE(CLK32KG, 0x8C, 48, 0, 0x21), + TWL6030_ADJUSTABLE_LDO(VAUX1_6030, 0x54, 1000, 3300, 1), + TWL6030_ADJUSTABLE_LDO(VAUX2_6030, 0x58, 1000, 3300, 2), + TWL6030_ADJUSTABLE_LDO(VAUX3_6030, 0x5c, 1000, 3300, 3), + TWL6030_ADJUSTABLE_LDO(VMMC, 0x68, 1000, 3300, 4), + TWL6030_ADJUSTABLE_LDO(VPP, 0x6c, 1000, 3300, 5), + TWL6030_ADJUSTABLE_LDO(VUSIM, 0x74, 1000, 3300, 7), + TWL6030_FIXED_LDO(VANA, 0x50, 2100, 15, 0), + TWL6030_FIXED_LDO(VCXIO, 0x60, 1800, 16, 0), + TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0), + TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0), + TWL6030_FIXED_RESOURCE(CLK32KG, 0x8C, 48, 0), }; static int __devinit twlreg_probe(struct platform_device *pdev) @@ -682,7 +678,8 @@ static int __devinit twlreg_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, rdev); - twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP, + if (twl_class_is_4030()) + twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_REMAP, info->remap); /* NOTE: many regulators support short-circuit IRQs (presentable -- cgit v1.2.3 From b2456779f39e33ad63a63aabe9af77d1113f106e Mon Sep 17 00:00:00 2001 From: Saquib Herman Date: Fri, 1 Apr 2011 10:22:44 +0530 Subject: regulator: twl: fix twl6030 regulator is_enabled With TWL6030, it is not enough to ensure that the regulator is the group of P1 group (CPU/Linux), but we need to check the state as far as APP is concerned as well. Split the current is_enabled to 6030 and 4030 specific ones. This split impacts few macros and variables as well, but sets up the stage for further fixes to set_mode and get_status in subsequent patches. Signed-off-by: Nishanth Menon Signed-off-by: Saquib Herman Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 61 +++++++++++++++++++++++++++++---------- 1 file changed, 46 insertions(+), 15 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 821fd4206ade..cae168f0f7b3 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -80,6 +80,10 @@ struct twlreg_info { #define TWL6030_CFG_STATE_OFF 0x00 #define TWL6030_CFG_STATE_ON 0x01 #define TWL6030_CFG_STATE_GRP_SHIFT 5 +#define TWL6030_CFG_STATE_APP_SHIFT 2 +#define TWL6030_CFG_STATE_APP_MASK (0x03 << TWL6030_CFG_STATE_APP_SHIFT) +#define TWL6030_CFG_STATE_APP(v) (((v) & TWL6030_CFG_STATE_APP_MASK) >>\ + TWL6030_CFG_STATE_APP_SHIFT) static inline int twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset) @@ -123,18 +127,31 @@ static int twlreg_grp(struct regulator_dev *rdev) #define P2_GRP_6030 BIT(1) /* "peripherals" */ #define P1_GRP_6030 BIT(0) /* CPU/Linux */ -static int twlreg_is_enabled(struct regulator_dev *rdev) +static int twl4030reg_is_enabled(struct regulator_dev *rdev) { int state = twlreg_grp(rdev); if (state < 0) return state; - if (twl_class_is_4030()) - state &= P1_GRP_4030; - else - state &= P1_GRP_6030; - return state; + return state & P1_GRP_4030; +} + +static int twl6030reg_is_enabled(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int grp, val; + + grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); + if (grp < 0) + return grp; + + grp &= P1_GRP_6030; + + val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE); + val = TWL6030_CFG_STATE_APP(val); + + return grp && (val == TWL6030_CFG_STATE_ON); } static int twlreg_enable(struct regulator_dev *rdev) @@ -406,7 +423,7 @@ static struct regulator_ops twl4030ldo_ops = { .enable = twlreg_enable, .disable = twlreg_disable, - .is_enabled = twlreg_is_enabled, + .is_enabled = twl4030reg_is_enabled, .set_mode = twlreg_set_mode, @@ -464,7 +481,7 @@ static struct regulator_ops twl6030ldo_ops = { .enable = twlreg_enable, .disable = twlreg_disable, - .is_enabled = twlreg_is_enabled, + .is_enabled = twl6030reg_is_enabled, .set_mode = twlreg_set_mode, @@ -490,14 +507,28 @@ static int twlfixed_get_voltage(struct regulator_dev *rdev) return info->min_mV * 1000; } -static struct regulator_ops twlfixed_ops = { +static struct regulator_ops twl4030fixed_ops = { + .list_voltage = twlfixed_list_voltage, + + .get_voltage = twlfixed_get_voltage, + + .enable = twlreg_enable, + .disable = twlreg_disable, + .is_enabled = twl4030reg_is_enabled, + + .set_mode = twlreg_set_mode, + + .get_status = twlreg_get_status, +}; + +static struct regulator_ops twl6030fixed_ops = { .list_voltage = twlfixed_list_voltage, .get_voltage = twlfixed_get_voltage, .enable = twlreg_enable, .disable = twlreg_disable, - .is_enabled = twlreg_is_enabled, + .is_enabled = twl6030reg_is_enabled, .set_mode = twlreg_set_mode, @@ -507,7 +538,7 @@ static struct regulator_ops twlfixed_ops = { static struct regulator_ops twl6030_fixed_resource = { .enable = twlreg_enable, .disable = twlreg_disable, - .is_enabled = twlreg_is_enabled, + .is_enabled = twl6030reg_is_enabled, .get_status = twlreg_get_status, }; @@ -516,10 +547,10 @@ static struct regulator_ops twl6030_fixed_resource = { #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ remap_conf) \ TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ - remap_conf, TWL4030) + remap_conf, TWL4030, twl4030fixed_ops) #define TWL6030_FIXED_LDO(label, offset, mVolts, num, turnon_delay) \ TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ - 0x0, TWL6030) + 0x0, TWL6030, twl6030fixed_ops) #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) { \ .base = offset, \ @@ -555,7 +586,7 @@ static struct regulator_ops twl6030_fixed_resource = { #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \ - family) { \ + family, operations) { \ .base = offset, \ .id = num, \ .min_mV = mVolts, \ @@ -565,7 +596,7 @@ static struct regulator_ops twl6030_fixed_resource = { .name = #label, \ .id = family##_REG_##label, \ .n_voltages = 1, \ - .ops = &twlfixed_ops, \ + .ops = &operations, \ .type = REGULATOR_VOLTAGE, \ .owner = THIS_MODULE, \ }, \ -- cgit v1.2.3 From 9a0244ad719258b0ae6064ad7da937cddcb109e0 Mon Sep 17 00:00:00 2001 From: Saquib Herman Date: Fri, 1 Apr 2011 10:22:45 +0530 Subject: regulator: twl: add twl6030 get_status Current get_status logic does not support 6030 get_status. The logic for 4030 is not reusable for 6030 as the status check for 6030 now depends on the new CFG_STATE register. We hence rename the old get_status as being specific to 4030 and remove the redundant check for the same. Signed-off-by: Nishanth Menon Signed-off-by: Saquib Herman Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 44 +++++++++++++++++++++++++++++++-------- 1 file changed, 35 insertions(+), 9 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index cae168f0f7b3..2d4218ac8535 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -79,6 +79,8 @@ struct twlreg_info { /* TWL6030 LDO register values for CFG_STATE */ #define TWL6030_CFG_STATE_OFF 0x00 #define TWL6030_CFG_STATE_ON 0x01 +#define TWL6030_CFG_STATE_OFF2 0x02 +#define TWL6030_CFG_STATE_SLEEP 0x03 #define TWL6030_CFG_STATE_GRP_SHIFT 5 #define TWL6030_CFG_STATE_APP_SHIFT 2 #define TWL6030_CFG_STATE_APP_MASK (0x03 << TWL6030_CFG_STATE_APP_SHIFT) @@ -217,13 +219,10 @@ static int twlreg_disable(struct regulator_dev *rdev) return ret; } -static int twlreg_get_status(struct regulator_dev *rdev) +static int twl4030reg_get_status(struct regulator_dev *rdev) { int state = twlreg_grp(rdev); - if (twl_class_is_6030()) - return 0; /* FIXME return for 6030 regulator */ - if (state < 0) return state; state &= 0x0f; @@ -236,6 +235,33 @@ static int twlreg_get_status(struct regulator_dev *rdev) : REGULATOR_STATUS_STANDBY; } +static int twl6030reg_get_status(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int val; + + val = twlreg_grp(rdev); + if (val < 0) + return val; + + val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE); + + switch (TWL6030_CFG_STATE_APP(val)) { + case TWL6030_CFG_STATE_ON: + return REGULATOR_STATUS_NORMAL; + + case TWL6030_CFG_STATE_SLEEP: + return REGULATOR_STATUS_STANDBY; + + case TWL6030_CFG_STATE_OFF: + case TWL6030_CFG_STATE_OFF2: + default: + break; + } + + return REGULATOR_STATUS_OFF; +} + static int twlreg_set_mode(struct regulator_dev *rdev, unsigned mode) { struct twlreg_info *info = rdev_get_drvdata(rdev); @@ -427,7 +453,7 @@ static struct regulator_ops twl4030ldo_ops = { .set_mode = twlreg_set_mode, - .get_status = twlreg_get_status, + .get_status = twl4030reg_get_status, }; static int twl6030ldo_list_voltage(struct regulator_dev *rdev, unsigned index) @@ -485,7 +511,7 @@ static struct regulator_ops twl6030ldo_ops = { .set_mode = twlreg_set_mode, - .get_status = twlreg_get_status, + .get_status = twl6030reg_get_status, }; /*----------------------------------------------------------------------*/ @@ -518,7 +544,7 @@ static struct regulator_ops twl4030fixed_ops = { .set_mode = twlreg_set_mode, - .get_status = twlreg_get_status, + .get_status = twl4030reg_get_status, }; static struct regulator_ops twl6030fixed_ops = { @@ -532,14 +558,14 @@ static struct regulator_ops twl6030fixed_ops = { .set_mode = twlreg_set_mode, - .get_status = twlreg_get_status, + .get_status = twl6030reg_get_status, }; static struct regulator_ops twl6030_fixed_resource = { .enable = twlreg_enable, .disable = twlreg_disable, .is_enabled = twl6030reg_is_enabled, - .get_status = twlreg_get_status, + .get_status = twl6030reg_get_status, }; /*----------------------------------------------------------------------*/ -- cgit v1.2.3 From 1a39962fc4d1fccdf45fef2656b37acbae5fa793 Mon Sep 17 00:00:00 2001 From: Saquib Herman Date: Fri, 1 Apr 2011 10:22:46 +0530 Subject: regulator: twl: add twl6030 set_mode Current set_mode logic does not support 6030. The logic for 4030 is not reusable for 6030 as the mode setting for 6030 now uses the new CFG_STATE register. We hence rename the old get_status as being specific to 4030. Signed-off-by: Nishanth Menon Signed-off-by: Saquib Herman Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 42 +++++++++++++++++++++++++++++++-------- 1 file changed, 34 insertions(+), 8 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 2d4218ac8535..2a808c25f982 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -262,15 +262,12 @@ static int twl6030reg_get_status(struct regulator_dev *rdev) return REGULATOR_STATUS_OFF; } -static int twlreg_set_mode(struct regulator_dev *rdev, unsigned mode) +static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode) { struct twlreg_info *info = rdev_get_drvdata(rdev); unsigned message; int status; - if (twl_class_is_6030()) - return 0; /* FIXME return for 6030 regulator */ - /* We can only set the mode through state machine commands... */ switch (mode) { case REGULATOR_MODE_NORMAL: @@ -299,6 +296,35 @@ static int twlreg_set_mode(struct regulator_dev *rdev, unsigned mode) message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB); } +static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int grp; + int val; + + grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); + + if (grp < 0) + return grp; + + /* Compose the state register settings */ + val = grp << TWL6030_CFG_STATE_GRP_SHIFT; + /* We can only set the mode through state machine commands... */ + switch (mode) { + case REGULATOR_MODE_NORMAL: + val |= TWL6030_CFG_STATE_ON; + break; + case REGULATOR_MODE_STANDBY: + val |= TWL6030_CFG_STATE_SLEEP; + break; + + default: + return -EINVAL; + } + + return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, val); +} + /*----------------------------------------------------------------------*/ /* @@ -451,7 +477,7 @@ static struct regulator_ops twl4030ldo_ops = { .disable = twlreg_disable, .is_enabled = twl4030reg_is_enabled, - .set_mode = twlreg_set_mode, + .set_mode = twl4030reg_set_mode, .get_status = twl4030reg_get_status, }; @@ -509,7 +535,7 @@ static struct regulator_ops twl6030ldo_ops = { .disable = twlreg_disable, .is_enabled = twl6030reg_is_enabled, - .set_mode = twlreg_set_mode, + .set_mode = twl6030reg_set_mode, .get_status = twl6030reg_get_status, }; @@ -542,7 +568,7 @@ static struct regulator_ops twl4030fixed_ops = { .disable = twlreg_disable, .is_enabled = twl4030reg_is_enabled, - .set_mode = twlreg_set_mode, + .set_mode = twl4030reg_set_mode, .get_status = twl4030reg_get_status, }; @@ -556,7 +582,7 @@ static struct regulator_ops twl6030fixed_ops = { .disable = twlreg_disable, .is_enabled = twl6030reg_is_enabled, - .set_mode = twlreg_set_mode, + .set_mode = twl6030reg_set_mode, .get_status = twl6030reg_get_status, }; -- cgit v1.2.3 From 22c51b47aa7cded7e4768540ebbbfddc91e31d90 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 1 Apr 2011 18:25:25 +0800 Subject: regulator: Fix the argument of calling regulator_mode_constrain The second parameter of regulator_mode_constrain takes a pointer. This patch fixes below warning: drivers/regulator/core.c: In function 'regulator_set_mode': drivers/regulator/core.c:2014: warning: passing argument 2 of 'regulator_mode_constrain' makes pointer from integer without a cast drivers/regulator/core.c:200: note: expected 'int *' but argument is of type 'unsigned int' Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 7104404a9fa7..a2728a498c3f 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2011,7 +2011,7 @@ int regulator_set_mode(struct regulator *regulator, unsigned int mode) } /* constraints check */ - ret = regulator_mode_constrain(rdev, mode); + ret = regulator_mode_constrain(rdev, &mode); if (ret < 0) goto out; -- cgit v1.2.3 From 7ce8a2a05f249054e6bce109a15ee188b4124256 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 8 May 2011 22:19:09 +0100 Subject: regulator: Convert WM8400 to get_voltage_sel() Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/wm8400-regulator.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/wm8400-regulator.c b/drivers/regulator/wm8400-regulator.c index b42d01cef35a..0f12c70bebc9 100644 --- a/drivers/regulator/wm8400-regulator.c +++ b/drivers/regulator/wm8400-regulator.c @@ -55,7 +55,7 @@ static int wm8400_ldo_list_voltage(struct regulator_dev *dev, return 1600000 + ((selector - 14) * 100000); } -static int wm8400_ldo_get_voltage(struct regulator_dev *dev) +static int wm8400_ldo_get_voltage_sel(struct regulator_dev *dev) { struct wm8400 *wm8400 = rdev_get_drvdata(dev); u16 val; @@ -63,7 +63,7 @@ static int wm8400_ldo_get_voltage(struct regulator_dev *dev) val = wm8400_reg_read(wm8400, WM8400_LDO1_CONTROL + rdev_get_id(dev)); val &= WM8400_LDO1_VSEL_MASK; - return wm8400_ldo_list_voltage(dev, val); + return val; } static int wm8400_ldo_set_voltage(struct regulator_dev *dev, @@ -104,7 +104,7 @@ static struct regulator_ops wm8400_ldo_ops = { .enable = wm8400_ldo_enable, .disable = wm8400_ldo_disable, .list_voltage = wm8400_ldo_list_voltage, - .get_voltage = wm8400_ldo_get_voltage, + .get_voltage_sel = wm8400_ldo_get_voltage_sel, .set_voltage = wm8400_ldo_set_voltage, }; @@ -145,7 +145,7 @@ static int wm8400_dcdc_list_voltage(struct regulator_dev *dev, return 850000 + (selector * 25000); } -static int wm8400_dcdc_get_voltage(struct regulator_dev *dev) +static int wm8400_dcdc_get_voltage_sel(struct regulator_dev *dev) { struct wm8400 *wm8400 = rdev_get_drvdata(dev); u16 val; @@ -154,7 +154,7 @@ static int wm8400_dcdc_get_voltage(struct regulator_dev *dev) val = wm8400_reg_read(wm8400, WM8400_DCDC1_CONTROL_1 + offset); val &= WM8400_DC1_VSEL_MASK; - return 850000 + (25000 * val); + return val; } static int wm8400_dcdc_set_voltage(struct regulator_dev *dev, @@ -261,7 +261,7 @@ static struct regulator_ops wm8400_dcdc_ops = { .enable = wm8400_dcdc_enable, .disable = wm8400_dcdc_disable, .list_voltage = wm8400_dcdc_list_voltage, - .get_voltage = wm8400_dcdc_get_voltage, + .get_voltage_sel = wm8400_dcdc_get_voltage_sel, .set_voltage = wm8400_dcdc_set_voltage, .get_mode = wm8400_dcdc_get_mode, .set_mode = wm8400_dcdc_set_mode, -- cgit v1.2.3 From 82d158397b6eeb464263a6ef6a739c4118a34720 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 9 May 2011 11:41:02 +0200 Subject: regulator: Factor out references to rdev in regulator_force_disable() Don't go looking up the rdev pointer every time, just use a local variable like everything else. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index a2728a498c3f..98d25fcb3930 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1504,13 +1504,14 @@ static int _regulator_force_disable(struct regulator_dev *rdev, */ int regulator_force_disable(struct regulator *regulator) { + struct regulator_dev *rdev = regulator->rdev; struct regulator_dev *supply_rdev = NULL; int ret; - mutex_lock(®ulator->rdev->mutex); + mutex_lock(&rdev->mutex); regulator->uA_load = 0; - ret = _regulator_force_disable(regulator->rdev, &supply_rdev); - mutex_unlock(®ulator->rdev->mutex); + ret = _regulator_force_disable(rdev, &supply_rdev); + mutex_unlock(&rdev->mutex); if (supply_rdev) regulator_disable(get_device_regulator(rdev_get_dev(supply_rdev))); -- cgit v1.2.3 From ba413c5972676295862797a46f9070f81691d80e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 5 May 2011 23:32:58 +0800 Subject: regulator: Move VCOINCELL to be the last element of mc13892_regulators array In include/linux/mfd/mc13892.h, we define MC13892_VCOINCELL as 23. Thus VCOINCELL should be defined as 23th element in mc13892_regulators array, not the first one. This actually fixes an off-by-one bug while accessing mc13892_regulators array. For example, In mc13892_regulator_probe, we use MC13892_VCAM as array index of mc13892_regulators array. mc13892_regulators[MC13892_VCAM].desc.ops->set_mode = mc13892_vcam_set_mode; Currently, it access mc13892_regulators[12] ,which is VAUDIO not VCAM. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/mc13892-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index 1b8f7398a4a8..ba909cb0d2b8 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -259,7 +259,6 @@ static struct regulator_ops mc13892_sw_regulator_ops; mc13xxx_regulator_ops) static struct mc13xxx_regulator mc13892_regulators[] = { - MC13892_DEFINE_REGU(VCOINCELL, POWERCTL0, POWERCTL0, mc13892_vcoincell), MC13892_SW_DEFINE(SW1, SWITCHERS0, SWITCHERS0, mc13892_sw1), MC13892_SW_DEFINE(SW2, SWITCHERS1, SWITCHERS1, mc13892_sw), MC13892_SW_DEFINE(SW3, SWITCHERS2, SWITCHERS2, mc13892_sw), @@ -293,6 +292,7 @@ static struct mc13xxx_regulator mc13892_regulators[] = { MC13892_GPO_DEFINE(GPO4, POWERMISC, mc13892_gpo), MC13892_GPO_DEFINE(PWGT1SPI, POWERMISC, mc13892_pwgtdrv), MC13892_GPO_DEFINE(PWGT2SPI, POWERMISC, mc13892_pwgtdrv), + MC13892_DEFINE_REGU(VCOINCELL, POWERCTL0, POWERCTL0, mc13892_vcoincell), }; static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, -- cgit v1.2.3 From 492c826b9facefa84995f4dea917e301b5ee0884 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 8 May 2011 22:30:18 +0100 Subject: regulator: Remove supply_regulator_dev from machine configuration supply_regulator_dev (using a struct pointer) has been deprecated in favour of supply_regulator (using a regulator name) for quite a few releases now with a warning generated if it is used and there are no current in tree users so just remove the code. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- Documentation/power/regulator/machine.txt | 4 ++-- drivers/regulator/core.c | 16 ---------------- include/linux/regulator/machine.h | 3 --- 3 files changed, 2 insertions(+), 21 deletions(-) diff --git a/Documentation/power/regulator/machine.txt b/Documentation/power/regulator/machine.txt index bdec39b9bd75..b42419b52e44 100644 --- a/Documentation/power/regulator/machine.txt +++ b/Documentation/power/regulator/machine.txt @@ -53,11 +53,11 @@ static struct regulator_init_data regulator1_data = { Regulator-1 supplies power to Regulator-2. This relationship must be registered with the core so that Regulator-1 is also enabled when Consumer A enables its -supply (Regulator-2). The supply regulator is set by the supply_regulator_dev +supply (Regulator-2). The supply regulator is set by the supply_regulator field below:- static struct regulator_init_data regulator2_data = { - .supply_regulator_dev = &platform_regulator1_device.dev, + .supply_regulator = "regulator_name", .constraints = { .min_uV = 1800000, .max_uV = 2000000, diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 98d25fcb3930..432faa5cb8af 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2596,14 +2596,6 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, if (ret < 0) goto scrub; - /* set supply regulator if it exists */ - if (init_data->supply_regulator && init_data->supply_regulator_dev) { - dev_err(dev, - "Supply regulator specified by both name and dev\n"); - ret = -EINVAL; - goto scrub; - } - if (init_data->supply_regulator) { struct regulator_dev *r; int found = 0; @@ -2628,14 +2620,6 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc, goto scrub; } - if (init_data->supply_regulator_dev) { - dev_warn(dev, "Uses supply_regulator_dev instead of regulator_supply\n"); - ret = set_supply(rdev, - dev_get_drvdata(init_data->supply_regulator_dev)); - if (ret < 0) - goto scrub; - } - /* add consumers devices */ for (i = 0; i < init_data->num_consumer_supplies; i++) { ret = set_consumer_device_supply(rdev, diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index c4c4fc45f856..8f1a55d99494 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -160,8 +160,6 @@ struct regulator_consumer_supply { * @supply_regulator: Parent regulator. Specified using the regulator name * as it appears in the name field in sysfs, which can * be explicitly set using the constraints field 'name'. - * @supply_regulator_dev: Parent regulator (if any) - DEPRECATED in favour - * of supply_regulator. * * @constraints: Constraints. These must be specified for the regulator to * be usable. @@ -173,7 +171,6 @@ struct regulator_consumer_supply { */ struct regulator_init_data { const char *supply_regulator; /* or NULL for system supply */ - struct device *supply_regulator_dev; /* or NULL for system supply */ struct regulation_constraints constraints; -- cgit v1.2.3 From bf5892a8167e4aa5a9a6d72f803fde850e0c5753 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 8 May 2011 22:13:37 +0100 Subject: regulator: Support voltage offsets to compensate for drops in system Some systems, particularly physically large systems used for early prototyping, may experience substantial voltage drops between the regulator and the consumers as a result of long traces in the system. With these systems voltages may need to be set higher than requested in order to ensure reliable system operation. Allow systems to work around such hardware issues by allowing constraints to supply an offset to be applied to any requested and reported voltages. This is not ideal, especially since the voltage drop may be load dependant, but is sufficient for most affected systems, it is not expected to be used in production hardware. The offset is applied after all constraint processing so constraints should be specified in terms of consumer values not physically configured values. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 15 ++++++++++++--- include/linux/regulator/machine.h | 4 ++++ 2 files changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 432faa5cb8af..58452ac0f165 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -724,6 +724,10 @@ static void print_constraints(struct regulator_dev *rdev) count += sprintf(buf + count, "at %d mV ", ret / 1000); } + if (constraints->uV_offset) + count += sprintf(buf, "%dmV offset ", + constraints->uV_offset / 1000); + if (constraints->min_uA && constraints->max_uA) { if (constraints->min_uA == constraints->max_uA) count += sprintf(buf + count, "%d mA ", @@ -1641,6 +1645,9 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV); + min_uV += rdev->constraints->uV_offset; + max_uV += rdev->constraints->uV_offset; + if (rdev->desc->ops->set_voltage) { ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV, &selector); @@ -1865,18 +1872,20 @@ EXPORT_SYMBOL_GPL(regulator_sync_voltage); static int _regulator_get_voltage(struct regulator_dev *rdev) { - int sel; + int sel, ret; if (rdev->desc->ops->get_voltage_sel) { sel = rdev->desc->ops->get_voltage_sel(rdev); if (sel < 0) return sel; - return rdev->desc->ops->list_voltage(rdev, sel); + ret = rdev->desc->ops->list_voltage(rdev, sel); } if (rdev->desc->ops->get_voltage) - return rdev->desc->ops->get_voltage(rdev); + ret = rdev->desc->ops->get_voltage(rdev); else return -EINVAL; + + return ret - rdev->constraints->uV_offset; } /** diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 8f1a55d99494..ce3127a75c88 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -68,6 +68,8 @@ struct regulator_state { * * @min_uV: Smallest voltage consumers may set. * @max_uV: Largest voltage consumers may set. + * @uV_offset: Offset applied to voltages from consumer to compensate for + * voltage drops. * * @min_uA: Smallest consumers consumers may set. * @max_uA: Largest current consumers may set. @@ -99,6 +101,8 @@ struct regulation_constraints { int min_uV; int max_uV; + int uV_offset; + /* current output range (inclusive) - for current control */ int min_uA; int max_uA; -- cgit v1.2.3 From 98ea5c218ed150bf7cabb879db4fc2c106b6fa5b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 9 May 2011 17:49:40 +0800 Subject: regulator: Use mc13xxx_reg_write instead of mc13xxx_reg_rmw in mc13892_sw_regulator_set_voltage Currently, we call mc13xxx_reg_read and mc13xxx_reg_rmw for the same register. This can be converted to simply a mc13xxx_reg_read and a mc13xxx_reg_write, thus save a redundant register read. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/mc13892-regulator.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index ba909cb0d2b8..c1ed67ec5148 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -431,7 +431,8 @@ static int mc13892_sw_regulator_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, unsigned *selector) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); - int hi, value, val, mask, id = rdev_get_id(rdev); + int hi, value, mask, id = rdev_get_id(rdev); + u32 valread; int ret; dev_dbg(rdev_get_dev(rdev), "%s id: %d min_uV: %d max_uV: %d\n", @@ -447,15 +448,16 @@ static int mc13892_sw_regulator_set_voltage(struct regulator_dev *rdev, mc13xxx_lock(priv->mc13xxx); ret = mc13xxx_reg_read(priv->mc13xxx, - mc13892_regulators[id].vsel_reg, &val); + mc13892_regulators[id].vsel_reg, &valread); if (ret) goto err; - hi = val & MC13892_SWITCHERS0_SWxHI; if (value > 1375) hi = 1; - if (value < 1100) + else if (value < 1100) hi = 0; + else + hi = valread & MC13892_SWITCHERS0_SWxHI; if (hi) { value = (value - 1100000) / 25000; @@ -464,8 +466,10 @@ static int mc13892_sw_regulator_set_voltage(struct regulator_dev *rdev, value = (value - 600000) / 25000; mask = mc13892_regulators[id].vsel_mask | MC13892_SWITCHERS0_SWxHI; - ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].vsel_reg, - mask, value << mc13892_regulators[id].vsel_shift); + valread = (valread & ~mask) | + (value << mc13892_regulators[id].vsel_shift); + ret = mc13xxx_reg_write(priv->mc13xxx, mc13892_regulators[id].vsel_reg, + valread); err: mc13xxx_unlock(priv->mc13xxx); -- cgit v1.2.3 From 27c6750ec56fd3b22c670d9333d519a322996eb2 Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Mon, 2 May 2011 16:19:46 -0500 Subject: MFD: TPS65910: Add new mfd device for TPS65910 The TPS65910 chip is a power management IC for multimedia and handheld devices. It contains the following components: - Regulators - GPIO controller - RTC The tps65910 core driver is registered as a platform driver and provides communication through I2C with the host device for the different components. Signed-off-by: Graeme Gregory Signed-off-by: Jorge Eduardo Candelaria Acked-by: Samuel Ortiz Signed-off-by: Liam Girdwood --- drivers/mfd/Kconfig | 8 + drivers/mfd/Makefile | 1 + drivers/mfd/tps65910.c | 208 ++++++++++++ include/linux/mfd/tps65910.h | 753 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 970 insertions(+) create mode 100644 drivers/mfd/tps65910.c create mode 100644 include/linux/mfd/tps65910.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 8344fc0ab858..d67511a67fdd 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -719,6 +719,14 @@ config MFD_PM8XXX_IRQ This is required to use certain other PM 8xxx features, such as GPIO and MPP. +config MFD_TPS65910 + tristate "TPS65910 Power Management chip" + depends on I2C && GPIOLIB + select MFD_CORE + help + if you say yes here you get support for the TPS65910 series of + Power Management chips. + endif # MFD_SUPPORT menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 1acb8f29a96c..f43ef5bba3ba 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -93,3 +93,4 @@ obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o +obj-$(CONFIG_MFD_TPS65910) += tps65910.o diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c new file mode 100644 index 000000000000..dbcdfb55bb8d --- /dev/null +++ b/drivers/mfd/tps65910.c @@ -0,0 +1,208 @@ +/* + * tps65910.c -- TI TPS6591x + * + * Copyright 2010 Texas Instruments Inc. + * + * Author: Graeme Gregory + * Author: Jorge Eduardo Candelaria + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct mfd_cell tps65910s[] = { + { + .name = "tps65910-pmic", + }, + { + .name = "tps65910-rtc", + }, + { + .name = "tps65910-power", + }, +}; + + +static int tps65910_i2c_read(struct tps65910 *tps65910, u8 reg, + int bytes, void *dest) +{ + struct i2c_client *i2c = tps65910->i2c_client; + struct i2c_msg xfer[2]; + int ret; + + /* Write register */ + xfer[0].addr = i2c->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = ® + + /* Read data */ + xfer[1].addr = i2c->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = bytes; + xfer[1].buf = dest; + + ret = i2c_transfer(i2c->adapter, xfer, 2); + if (ret == 2) + ret = 0; + else if (ret >= 0) + ret = -EIO; + + return ret; +} + +static int tps65910_i2c_write(struct tps65910 *tps65910, u8 reg, + int bytes, void *src) +{ + struct i2c_client *i2c = tps65910->i2c_client; + /* we add 1 byte for device register */ + u8 msg[TPS65910_MAX_REGISTER + 1]; + int ret; + + if (bytes > (TPS65910_MAX_REGISTER + 1)) + return -EINVAL; + + msg[0] = reg; + memcpy(&msg[1], src, bytes); + + ret = i2c_master_send(i2c, msg, bytes + 1); + if (ret < 0) + return ret; + if (ret != bytes + 1) + return -EIO; + return 0; +} + +int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask) +{ + u8 data; + int err; + + mutex_lock(&tps65910->io_mutex); + err = tps65910_i2c_read(tps65910, reg, 1, &data); + if (err) { + dev_err(tps65910->dev, "read from reg %x failed\n", reg); + goto out; + } + + data |= mask; + err = tps65910_i2c_write(tps65910, reg, 1, &data); + if (err) + dev_err(tps65910->dev, "write to reg %x failed\n", reg); + +out: + mutex_unlock(&tps65910->io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(tps65910_set_bits); + +int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask) +{ + u8 data; + int err; + + mutex_lock(&tps65910->io_mutex); + err = tps65910_i2c_read(tps65910, reg, 1, &data); + if (err) { + dev_err(tps65910->dev, "read from reg %x failed\n", reg); + goto out; + } + + data &= mask; + err = tps65910_i2c_write(tps65910, reg, 1, &data); + if (err) + dev_err(tps65910->dev, "write to reg %x failed\n", reg); + +out: + mutex_unlock(&tps65910->io_mutex); + return err; +} +EXPORT_SYMBOL_GPL(tps65910_clear_bits); + +static int tps65910_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct tps65910 *tps65910; + int ret = 0; + + tps65910 = kzalloc(sizeof(struct tps65910), GFP_KERNEL); + if (tps65910 == NULL) + return -ENOMEM; + + i2c_set_clientdata(i2c, tps65910); + tps65910->dev = &i2c->dev; + tps65910->i2c_client = i2c; + tps65910->read = tps65910_i2c_read; + tps65910->write = tps65910_i2c_write; + mutex_init(&tps65910->io_mutex); + + ret = mfd_add_devices(tps65910->dev, -1, + tps65910s, ARRAY_SIZE(tps65910s), + NULL, 0); + if (ret < 0) + goto err; + + return ret; + +err: + mfd_remove_devices(tps65910->dev); + kfree(tps65910); + return ret; +} + +static int tps65910_i2c_remove(struct i2c_client *i2c) +{ + struct tps65910 *tps65910 = i2c_get_clientdata(i2c); + + mfd_remove_devices(tps65910->dev); + kfree(tps65910); + + return 0; +} + +static const struct i2c_device_id tps65910_i2c_id[] = { + { "tps65910", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tps65910_i2c_id); + + +static struct i2c_driver tps65910_i2c_driver = { + .driver = { + .name = "tps65910", + .owner = THIS_MODULE, + }, + .probe = tps65910_i2c_probe, + .remove = tps65910_i2c_remove, + .id_table = tps65910_i2c_id, +}; + +static int __init tps65910_i2c_init(void) +{ + return i2c_add_driver(&tps65910_i2c_driver); +} +/* init early so consumer devices can complete system boot */ +subsys_initcall(tps65910_i2c_init); + +static void __exit tps65910_i2c_exit(void) +{ + i2c_del_driver(&tps65910_i2c_driver); +} +module_exit(tps65910_i2c_exit); + +MODULE_AUTHOR("Graeme Gregory "); +MODULE_AUTHOR("Jorge Eduardo Candelaria "); +MODULE_DESCRIPTION("TPS6591x chip family multi-function driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h new file mode 100644 index 000000000000..fa1b029e5499 --- /dev/null +++ b/include/linux/mfd/tps65910.h @@ -0,0 +1,753 @@ +/* + * tps65910.h -- TI TPS6591x + * + * Copyright 2010-2011 Texas Instruments Inc. + * + * Author: Graeme Gregory + * Author: Jorge Eduardo Candelaria + * Author: Arnaud Deconinck + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MFD_TPS65910_H +#define __LINUX_MFD_TPS65910_H + +/* + * List of registers for component TPS65910 + * + */ + +#define TPS65910_SECONDS 0x0 +#define TPS65910_MINUTES 0x1 +#define TPS65910_HOURS 0x2 +#define TPS65910_DAYS 0x3 +#define TPS65910_MONTHS 0x4 +#define TPS65910_YEARS 0x5 +#define TPS65910_WEEKS 0x6 +#define TPS65910_ALARM_SECONDS 0x8 +#define TPS65910_ALARM_MINUTES 0x9 +#define TPS65910_ALARM_HOURS 0xA +#define TPS65910_ALARM_DAYS 0xB +#define TPS65910_ALARM_MONTHS 0xC +#define TPS65910_ALARM_YEARS 0xD +#define TPS65910_RTC_CTRL 0x10 +#define TPS65910_RTC_STATUS 0x11 +#define TPS65910_RTC_INTERRUPTS 0x12 +#define TPS65910_RTC_COMP_LSB 0x13 +#define TPS65910_RTC_COMP_MSB 0x14 +#define TPS65910_RTC_RES_PROG 0x15 +#define TPS65910_RTC_RESET_STATUS 0x16 +#define TPS65910_BCK1 0x17 +#define TPS65910_BCK2 0x18 +#define TPS65910_BCK3 0x19 +#define TPS65910_BCK4 0x1A +#define TPS65910_BCK5 0x1B +#define TPS65910_PUADEN 0x1C +#define TPS65910_REF 0x1D +#define TPS65910_VRTC 0x1E +#define TPS65910_VIO 0x20 +#define TPS65910_VDD1 0x21 +#define TPS65910_VDD1_OP 0x22 +#define TPS65910_VDD1_SR 0x23 +#define TPS65910_VDD2 0x24 +#define TPS65910_VDD2_OP 0x25 +#define TPS65910_VDD2_SR 0x26 +#define TPS65910_VDD3 0x27 +#define TPS65910_VDIG1 0x30 +#define TPS65910_VDIG2 0x31 +#define TPS65910_VAUX1 0x32 +#define TPS65910_VAUX2 0x33 +#define TPS65910_VAUX33 0x34 +#define TPS65910_VMMC 0x35 +#define TPS65910_VPLL 0x36 +#define TPS65910_VDAC 0x37 +#define TPS65910_THERM 0x38 +#define TPS65910_BBCH 0x39 +#define TPS65910_DCDCCTRL 0x3E +#define TPS65910_DEVCTRL 0x3F +#define TPS65910_DEVCTRL2 0x40 +#define TPS65910_SLEEP_KEEP_LDO_ON 0x41 +#define TPS65910_SLEEP_KEEP_RES_ON 0x42 +#define TPS65910_SLEEP_SET_LDO_OFF 0x43 +#define TPS65910_SLEEP_SET_RES_OFF 0x44 +#define TPS65910_EN1_LDO_ASS 0x45 +#define TPS65910_EN1_SMPS_ASS 0x46 +#define TPS65910_EN2_LDO_ASS 0x47 +#define TPS65910_EN2_SMPS_ASS 0x48 +#define TPS65910_EN3_LDO_ASS 0x49 +#define TPS65910_SPARE 0x4A +#define TPS65910_INT_STS 0x50 +#define TPS65910_INT_MSK 0x51 +#define TPS65910_INT_STS2 0x52 +#define TPS65910_INT_MSK2 0x53 +#define TPS65910_INT_STS3 0x54 +#define TPS65910_INT_MSK3 0x55 +#define TPS65910_GPIO0 0x60 +#define TPS65910_GPIO1 0x61 +#define TPS65910_GPIO2 0x62 +#define TPS65910_GPIO3 0x63 +#define TPS65910_GPIO4 0x64 +#define TPS65910_GPIO5 0x65 +#define TPS65910_JTAGVERNUM 0x80 +#define TPS65910_MAX_REGISTER 0x80 + +/* + * List of register bitfields for component TPS65910 + * + */ + + +/*Register BCK1 (0x80) register.RegisterDescription */ +#define BCK1_BCKUP_MASK 0xFF +#define BCK1_BCKUP_SHIFT 0 + + +/*Register BCK2 (0x80) register.RegisterDescription */ +#define BCK2_BCKUP_MASK 0xFF +#define BCK2_BCKUP_SHIFT 0 + + +/*Register BCK3 (0x80) register.RegisterDescription */ +#define BCK3_BCKUP_MASK 0xFF +#define BCK3_BCKUP_SHIFT 0 + + +/*Register BCK4 (0x80) register.RegisterDescription */ +#define BCK4_BCKUP_MASK 0xFF +#define BCK4_BCKUP_SHIFT 0 + + +/*Register BCK5 (0x80) register.RegisterDescription */ +#define BCK5_BCKUP_MASK 0xFF +#define BCK5_BCKUP_SHIFT 0 + + +/*Register PUADEN (0x80) register.RegisterDescription */ +#define PUADEN_EN3P_MASK 0x80 +#define PUADEN_EN3P_SHIFT 7 +#define PUADEN_I2CCTLP_MASK 0x40 +#define PUADEN_I2CCTLP_SHIFT 6 +#define PUADEN_I2CSRP_MASK 0x20 +#define PUADEN_I2CSRP_SHIFT 5 +#define PUADEN_PWRONP_MASK 0x10 +#define PUADEN_PWRONP_SHIFT 4 +#define PUADEN_SLEEPP_MASK 0x08 +#define PUADEN_SLEEPP_SHIFT 3 +#define PUADEN_PWRHOLDP_MASK 0x04 +#define PUADEN_PWRHOLDP_SHIFT 2 +#define PUADEN_BOOT1P_MASK 0x02 +#define PUADEN_BOOT1P_SHIFT 1 +#define PUADEN_BOOT0P_MASK 0x01 +#define PUADEN_BOOT0P_SHIFT 0 + + +/*Register REF (0x80) register.RegisterDescription */ +#define REF_VMBCH_SEL_MASK 0x0C +#define REF_VMBCH_SEL_SHIFT 2 +#define REF_ST_MASK 0x03 +#define REF_ST_SHIFT 0 + + +/*Register VRTC (0x80) register.RegisterDescription */ +#define VRTC_VRTC_OFFMASK_MASK 0x08 +#define VRTC_VRTC_OFFMASK_SHIFT 3 +#define VRTC_ST_MASK 0x03 +#define VRTC_ST_SHIFT 0 + + +/*Register VIO (0x80) register.RegisterDescription */ +#define VIO_ILMAX_MASK 0xC0 +#define VIO_ILMAX_SHIFT 6 +#define VIO_SEL_MASK 0x0C +#define VIO_SEL_SHIFT 2 +#define VIO_ST_MASK 0x03 +#define VIO_ST_SHIFT 0 + + +/*Register VDD1 (0x80) register.RegisterDescription */ +#define VDD1_VGAIN_SEL_MASK 0xC0 +#define VDD1_VGAIN_SEL_SHIFT 6 +#define VDD1_ILMAX_MASK 0x20 +#define VDD1_ILMAX_SHIFT 5 +#define VDD1_TSTEP_MASK 0x1C +#define VDD1_TSTEP_SHIFT 2 +#define VDD1_ST_MASK 0x03 +#define VDD1_ST_SHIFT 0 + + +/*Register VDD1_OP (0x80) register.RegisterDescription */ +#define VDD1_OP_CMD_MASK 0x80 +#define VDD1_OP_CMD_SHIFT 7 +#define VDD1_OP_SEL_MASK 0x7F +#define VDD1_OP_SEL_SHIFT 0 + + +/*Register VDD1_SR (0x80) register.RegisterDescription */ +#define VDD1_SR_SEL_MASK 0x7F +#define VDD1_SR_SEL_SHIFT 0 + + +/*Register VDD2 (0x80) register.RegisterDescription */ +#define VDD2_VGAIN_SEL_MASK 0xC0 +#define VDD2_VGAIN_SEL_SHIFT 6 +#define VDD2_ILMAX_MASK 0x20 +#define VDD2_ILMAX_SHIFT 5 +#define VDD2_TSTEP_MASK 0x1C +#define VDD2_TSTEP_SHIFT 2 +#define VDD2_ST_MASK 0x03 +#define VDD2_ST_SHIFT 0 + + +/*Register VDD2_OP (0x80) register.RegisterDescription */ +#define VDD2_OP_CMD_MASK 0x80 +#define VDD2_OP_CMD_SHIFT 7 +#define VDD2_OP_SEL_MASK 0x7F +#define VDD2_OP_SEL_SHIFT 0 + + +/*Register VDD2_SR (0x80) register.RegisterDescription */ +#define VDD2_SR_SEL_MASK 0x7F +#define VDD2_SR_SEL_SHIFT 0 + + +/*Register VDD3 (0x80) register.RegisterDescription */ +#define VDD3_CKINEN_MASK 0x04 +#define VDD3_CKINEN_SHIFT 2 +#define VDD3_ST_MASK 0x03 +#define VDD3_ST_SHIFT 0 + + +/*Register VDIG1 (0x80) register.RegisterDescription */ +#define VDIG1_SEL_MASK 0x0C +#define VDIG1_SEL_SHIFT 2 +#define VDIG1_ST_MASK 0x03 +#define VDIG1_ST_SHIFT 0 + + +/*Register VDIG2 (0x80) register.RegisterDescription */ +#define VDIG2_SEL_MASK 0x0C +#define VDIG2_SEL_SHIFT 2 +#define VDIG2_ST_MASK 0x03 +#define VDIG2_ST_SHIFT 0 + + +/*Register VAUX1 (0x80) register.RegisterDescription */ +#define VAUX1_SEL_MASK 0x0C +#define VAUX1_SEL_SHIFT 2 +#define VAUX1_ST_MASK 0x03 +#define VAUX1_ST_SHIFT 0 + + +/*Register VAUX2 (0x80) register.RegisterDescription */ +#define VAUX2_SEL_MASK 0x0C +#define VAUX2_SEL_SHIFT 2 +#define VAUX2_ST_MASK 0x03 +#define VAUX2_ST_SHIFT 0 + + +/*Register VAUX33 (0x80) register.RegisterDescription */ +#define VAUX33_SEL_MASK 0x0C +#define VAUX33_SEL_SHIFT 2 +#define VAUX33_ST_MASK 0x03 +#define VAUX33_ST_SHIFT 0 + + +/*Register VMMC (0x80) register.RegisterDescription */ +#define VMMC_SEL_MASK 0x0C +#define VMMC_SEL_SHIFT 2 +#define VMMC_ST_MASK 0x03 +#define VMMC_ST_SHIFT 0 + + +/*Register VPLL (0x80) register.RegisterDescription */ +#define VPLL_SEL_MASK 0x0C +#define VPLL_SEL_SHIFT 2 +#define VPLL_ST_MASK 0x03 +#define VPLL_ST_SHIFT 0 + + +/*Register VDAC (0x80) register.RegisterDescription */ +#define VDAC_SEL_MASK 0x0C +#define VDAC_SEL_SHIFT 2 +#define VDAC_ST_MASK 0x03 +#define VDAC_ST_SHIFT 0 + + +/*Register THERM (0x80) register.RegisterDescription */ +#define THERM_THERM_HD_MASK 0x20 +#define THERM_THERM_HD_SHIFT 5 +#define THERM_THERM_TS_MASK 0x10 +#define THERM_THERM_TS_SHIFT 4 +#define THERM_THERM_HDSEL_MASK 0x0C +#define THERM_THERM_HDSEL_SHIFT 2 +#define THERM_RSVD1_MASK 0x02 +#define THERM_RSVD1_SHIFT 1 +#define THERM_THERM_STATE_MASK 0x01 +#define THERM_THERM_STATE_SHIFT 0 + + +/*Register BBCH (0x80) register.RegisterDescription */ +#define BBCH_BBSEL_MASK 0x06 +#define BBCH_BBSEL_SHIFT 1 +#define BBCH_BBCHEN_MASK 0x01 +#define BBCH_BBCHEN_SHIFT 0 + + +/*Register DCDCCTRL (0x80) register.RegisterDescription */ +#define DCDCCTRL_VDD2_PSKIP_MASK 0x20 +#define DCDCCTRL_VDD2_PSKIP_SHIFT 5 +#define DCDCCTRL_VDD1_PSKIP_MASK 0x10 +#define DCDCCTRL_VDD1_PSKIP_SHIFT 4 +#define DCDCCTRL_VIO_PSKIP_MASK 0x08 +#define DCDCCTRL_VIO_PSKIP_SHIFT 3 +#define DCDCCTRL_DCDCCKEXT_MASK 0x04 +#define DCDCCTRL_DCDCCKEXT_SHIFT 2 +#define DCDCCTRL_DCDCCKSYNC_MASK 0x03 +#define DCDCCTRL_DCDCCKSYNC_SHIFT 0 + + +/*Register DEVCTRL (0x80) register.RegisterDescription */ +#define DEVCTRL_RTC_PWDN_MASK 0x40 +#define DEVCTRL_RTC_PWDN_SHIFT 6 +#define DEVCTRL_CK32K_CTRL_MASK 0x20 +#define DEVCTRL_CK32K_CTRL_SHIFT 5 +#define DEVCTRL_SR_CTL_I2C_SEL_MASK 0x10 +#define DEVCTRL_SR_CTL_I2C_SEL_SHIFT 4 +#define DEVCTRL_DEV_OFF_RST_MASK 0x08 +#define DEVCTRL_DEV_OFF_RST_SHIFT 3 +#define DEVCTRL_DEV_ON_MASK 0x04 +#define DEVCTRL_DEV_ON_SHIFT 2 +#define DEVCTRL_DEV_SLP_MASK 0x02 +#define DEVCTRL_DEV_SLP_SHIFT 1 +#define DEVCTRL_DEV_OFF_MASK 0x01 +#define DEVCTRL_DEV_OFF_SHIFT 0 + + +/*Register DEVCTRL2 (0x80) register.RegisterDescription */ +#define DEVCTRL2_TSLOT_LENGTH_MASK 0x30 +#define DEVCTRL2_TSLOT_LENGTH_SHIFT 4 +#define DEVCTRL2_SLEEPSIG_POL_MASK 0x08 +#define DEVCTRL2_SLEEPSIG_POL_SHIFT 3 +#define DEVCTRL2_PWON_LP_OFF_MASK 0x04 +#define DEVCTRL2_PWON_LP_OFF_SHIFT 2 +#define DEVCTRL2_PWON_LP_RST_MASK 0x02 +#define DEVCTRL2_PWON_LP_RST_SHIFT 1 +#define DEVCTRL2_IT_POL_MASK 0x01 +#define DEVCTRL2_IT_POL_SHIFT 0 + + +/*Register SLEEP_KEEP_LDO_ON (0x80) register.RegisterDescription */ +#define SLEEP_KEEP_LDO_ON_VDAC_KEEPON_MASK 0x80 +#define SLEEP_KEEP_LDO_ON_VDAC_KEEPON_SHIFT 7 +#define SLEEP_KEEP_LDO_ON_VPLL_KEEPON_MASK 0x40 +#define SLEEP_KEEP_LDO_ON_VPLL_KEEPON_SHIFT 6 +#define SLEEP_KEEP_LDO_ON_VAUX33_KEEPON_MASK 0x20 +#define SLEEP_KEEP_LDO_ON_VAUX33_KEEPON_SHIFT 5 +#define SLEEP_KEEP_LDO_ON_VAUX2_KEEPON_MASK 0x10 +#define SLEEP_KEEP_LDO_ON_VAUX2_KEEPON_SHIFT 4 +#define SLEEP_KEEP_LDO_ON_VAUX1_KEEPON_MASK 0x08 +#define SLEEP_KEEP_LDO_ON_VAUX1_KEEPON_SHIFT 3 +#define SLEEP_KEEP_LDO_ON_VDIG2_KEEPON_MASK 0x04 +#define SLEEP_KEEP_LDO_ON_VDIG2_KEEPON_SHIFT 2 +#define SLEEP_KEEP_LDO_ON_VDIG1_KEEPON_MASK 0x02 +#define SLEEP_KEEP_LDO_ON_VDIG1_KEEPON_SHIFT 1 +#define SLEEP_KEEP_LDO_ON_VMMC_KEEPON_MASK 0x01 +#define SLEEP_KEEP_LDO_ON_VMMC_KEEPON_SHIFT 0 + + +/*Register SLEEP_KEEP_RES_ON (0x80) register.RegisterDescription */ +#define SLEEP_KEEP_RES_ON_THERM_KEEPON_MASK 0x80 +#define SLEEP_KEEP_RES_ON_THERM_KEEPON_SHIFT 7 +#define SLEEP_KEEP_RES_ON_CLKOUT32K_KEEPON_MASK 0x40 +#define SLEEP_KEEP_RES_ON_CLKOUT32K_KEEPON_SHIFT 6 +#define SLEEP_KEEP_RES_ON_VRTC_KEEPON_MASK 0x20 +#define SLEEP_KEEP_RES_ON_VRTC_KEEPON_SHIFT 5 +#define SLEEP_KEEP_RES_ON_I2CHS_KEEPON_MASK 0x10 +#define SLEEP_KEEP_RES_ON_I2CHS_KEEPON_SHIFT 4 +#define SLEEP_KEEP_RES_ON_VDD3_KEEPON_MASK 0x08 +#define SLEEP_KEEP_RES_ON_VDD3_KEEPON_SHIFT 3 +#define SLEEP_KEEP_RES_ON_VDD2_KEEPON_MASK 0x04 +#define SLEEP_KEEP_RES_ON_VDD2_KEEPON_SHIFT 2 +#define SLEEP_KEEP_RES_ON_VDD1_KEEPON_MASK 0x02 +#define SLEEP_KEEP_RES_ON_VDD1_KEEPON_SHIFT 1 +#define SLEEP_KEEP_RES_ON_VIO_KEEPON_MASK 0x01 +#define SLEEP_KEEP_RES_ON_VIO_KEEPON_SHIFT 0 + + +/*Register SLEEP_SET_LDO_OFF (0x80) register.RegisterDescription */ +#define SLEEP_SET_LDO_OFF_VDAC_SETOFF_MASK 0x80 +#define SLEEP_SET_LDO_OFF_VDAC_SETOFF_SHIFT 7 +#define SLEEP_SET_LDO_OFF_VPLL_SETOFF_MASK 0x40 +#define SLEEP_SET_LDO_OFF_VPLL_SETOFF_SHIFT 6 +#define SLEEP_SET_LDO_OFF_VAUX33_SETOFF_MASK 0x20 +#define SLEEP_SET_LDO_OFF_VAUX33_SETOFF_SHIFT 5 +#define SLEEP_SET_LDO_OFF_VAUX2_SETOFF_MASK 0x10 +#define SLEEP_SET_LDO_OFF_VAUX2_SETOFF_SHIFT 4 +#define SLEEP_SET_LDO_OFF_VAUX1_SETOFF_MASK 0x08 +#define SLEEP_SET_LDO_OFF_VAUX1_SETOFF_SHIFT 3 +#define SLEEP_SET_LDO_OFF_VDIG2_SETOFF_MASK 0x04 +#define SLEEP_SET_LDO_OFF_VDIG2_SETOFF_SHIFT 2 +#define SLEEP_SET_LDO_OFF_VDIG1_SETOFF_MASK 0x02 +#define SLEEP_SET_LDO_OFF_VDIG1_SETOFF_SHIFT 1 +#define SLEEP_SET_LDO_OFF_VMMC_SETOFF_MASK 0x01 +#define SLEEP_SET_LDO_OFF_VMMC_SETOFF_SHIFT 0 + + +/*Register SLEEP_SET_RES_OFF (0x80) register.RegisterDescription */ +#define SLEEP_SET_RES_OFF_DEFAULT_VOLT_MASK 0x80 +#define SLEEP_SET_RES_OFF_DEFAULT_VOLT_SHIFT 7 +#define SLEEP_SET_RES_OFF_RSVD_MASK 0x60 +#define SLEEP_SET_RES_OFF_RSVD_SHIFT 5 +#define SLEEP_SET_RES_OFF_SPARE_SETOFF_MASK 0x10 +#define SLEEP_SET_RES_OFF_SPARE_SETOFF_SHIFT 4 +#define SLEEP_SET_RES_OFF_VDD3_SETOFF_MASK 0x08 +#define SLEEP_SET_RES_OFF_VDD3_SETOFF_SHIFT 3 +#define SLEEP_SET_RES_OFF_VDD2_SETOFF_MASK 0x04 +#define SLEEP_SET_RES_OFF_VDD2_SETOFF_SHIFT 2 +#define SLEEP_SET_RES_OFF_VDD1_SETOFF_MASK 0x02 +#define SLEEP_SET_RES_OFF_VDD1_SETOFF_SHIFT 1 +#define SLEEP_SET_RES_OFF_VIO_SETOFF_MASK 0x01 +#define SLEEP_SET_RES_OFF_VIO_SETOFF_SHIFT 0 + + +/*Register EN1_LDO_ASS (0x80) register.RegisterDescription */ +#define EN1_LDO_ASS_VDAC_EN1_MASK 0x80 +#define EN1_LDO_ASS_VDAC_EN1_SHIFT 7 +#define EN1_LDO_ASS_VPLL_EN1_MASK 0x40 +#define EN1_LDO_ASS_VPLL_EN1_SHIFT 6 +#define EN1_LDO_ASS_VAUX33_EN1_MASK 0x20 +#define EN1_LDO_ASS_VAUX33_EN1_SHIFT 5 +#define EN1_LDO_ASS_VAUX2_EN1_MASK 0x10 +#define EN1_LDO_ASS_VAUX2_EN1_SHIFT 4 +#define EN1_LDO_ASS_VAUX1_EN1_MASK 0x08 +#define EN1_LDO_ASS_VAUX1_EN1_SHIFT 3 +#define EN1_LDO_ASS_VDIG2_EN1_MASK 0x04 +#define EN1_LDO_ASS_VDIG2_EN1_SHIFT 2 +#define EN1_LDO_ASS_VDIG1_EN1_MASK 0x02 +#define EN1_LDO_ASS_VDIG1_EN1_SHIFT 1 +#define EN1_LDO_ASS_VMMC_EN1_MASK 0x01 +#define EN1_LDO_ASS_VMMC_EN1_SHIFT 0 + + +/*Register EN1_SMPS_ASS (0x80) register.RegisterDescription */ +#define EN1_SMPS_ASS_RSVD_MASK 0xE0 +#define EN1_SMPS_ASS_RSVD_SHIFT 5 +#define EN1_SMPS_ASS_SPARE_EN1_MASK 0x10 +#define EN1_SMPS_ASS_SPARE_EN1_SHIFT 4 +#define EN1_SMPS_ASS_VDD3_EN1_MASK 0x08 +#define EN1_SMPS_ASS_VDD3_EN1_SHIFT 3 +#define EN1_SMPS_ASS_VDD2_EN1_MASK 0x04 +#define EN1_SMPS_ASS_VDD2_EN1_SHIFT 2 +#define EN1_SMPS_ASS_VDD1_EN1_MASK 0x02 +#define EN1_SMPS_ASS_VDD1_EN1_SHIFT 1 +#define EN1_SMPS_ASS_VIO_EN1_MASK 0x01 +#define EN1_SMPS_ASS_VIO_EN1_SHIFT 0 + + +/*Register EN2_LDO_ASS (0x80) register.RegisterDescription */ +#define EN2_LDO_ASS_VDAC_EN2_MASK 0x80 +#define EN2_LDO_ASS_VDAC_EN2_SHIFT 7 +#define EN2_LDO_ASS_VPLL_EN2_MASK 0x40 +#define EN2_LDO_ASS_VPLL_EN2_SHIFT 6 +#define EN2_LDO_ASS_VAUX33_EN2_MASK 0x20 +#define EN2_LDO_ASS_VAUX33_EN2_SHIFT 5 +#define EN2_LDO_ASS_VAUX2_EN2_MASK 0x10 +#define EN2_LDO_ASS_VAUX2_EN2_SHIFT 4 +#define EN2_LDO_ASS_VAUX1_EN2_MASK 0x08 +#define EN2_LDO_ASS_VAUX1_EN2_SHIFT 3 +#define EN2_LDO_ASS_VDIG2_EN2_MASK 0x04 +#define EN2_LDO_ASS_VDIG2_EN2_SHIFT 2 +#define EN2_LDO_ASS_VDIG1_EN2_MASK 0x02 +#define EN2_LDO_ASS_VDIG1_EN2_SHIFT 1 +#define EN2_LDO_ASS_VMMC_EN2_MASK 0x01 +#define EN2_LDO_ASS_VMMC_EN2_SHIFT 0 + + +/*Register EN2_SMPS_ASS (0x80) register.RegisterDescription */ +#define EN2_SMPS_ASS_RSVD_MASK 0xE0 +#define EN2_SMPS_ASS_RSVD_SHIFT 5 +#define EN2_SMPS_ASS_SPARE_EN2_MASK 0x10 +#define EN2_SMPS_ASS_SPARE_EN2_SHIFT 4 +#define EN2_SMPS_ASS_VDD3_EN2_MASK 0x08 +#define EN2_SMPS_ASS_VDD3_EN2_SHIFT 3 +#define EN2_SMPS_ASS_VDD2_EN2_MASK 0x04 +#define EN2_SMPS_ASS_VDD2_EN2_SHIFT 2 +#define EN2_SMPS_ASS_VDD1_EN2_MASK 0x02 +#define EN2_SMPS_ASS_VDD1_EN2_SHIFT 1 +#define EN2_SMPS_ASS_VIO_EN2_MASK 0x01 +#define EN2_SMPS_ASS_VIO_EN2_SHIFT 0 + + +/*Register EN3_LDO_ASS (0x80) register.RegisterDescription */ +#define EN3_LDO_ASS_VDAC_EN3_MASK 0x80 +#define EN3_LDO_ASS_VDAC_EN3_SHIFT 7 +#define EN3_LDO_ASS_VPLL_EN3_MASK 0x40 +#define EN3_LDO_ASS_VPLL_EN3_SHIFT 6 +#define EN3_LDO_ASS_VAUX33_EN3_MASK 0x20 +#define EN3_LDO_ASS_VAUX33_EN3_SHIFT 5 +#define EN3_LDO_ASS_VAUX2_EN3_MASK 0x10 +#define EN3_LDO_ASS_VAUX2_EN3_SHIFT 4 +#define EN3_LDO_ASS_VAUX1_EN3_MASK 0x08 +#define EN3_LDO_ASS_VAUX1_EN3_SHIFT 3 +#define EN3_LDO_ASS_VDIG2_EN3_MASK 0x04 +#define EN3_LDO_ASS_VDIG2_EN3_SHIFT 2 +#define EN3_LDO_ASS_VDIG1_EN3_MASK 0x02 +#define EN3_LDO_ASS_VDIG1_EN3_SHIFT 1 +#define EN3_LDO_ASS_VMMC_EN3_MASK 0x01 +#define EN3_LDO_ASS_VMMC_EN3_SHIFT 0 + + +/*Register SPARE (0x80) register.RegisterDescription */ +#define SPARE_SPARE_MASK 0xFF +#define SPARE_SPARE_SHIFT 0 + + +/*Register INT_STS (0x80) register.RegisterDescription */ +#define INT_STS_RTC_PERIOD_IT_MASK 0x80 +#define INT_STS_RTC_PERIOD_IT_SHIFT 7 +#define INT_STS_RTC_ALARM_IT_MASK 0x40 +#define INT_STS_RTC_ALARM_IT_SHIFT 6 +#define INT_STS_HOTDIE_IT_MASK 0x20 +#define INT_STS_HOTDIE_IT_SHIFT 5 +#define INT_STS_PWRHOLD_IT_MASK 0x10 +#define INT_STS_PWRHOLD_IT_SHIFT 4 +#define INT_STS_PWRON_LP_IT_MASK 0x08 +#define INT_STS_PWRON_LP_IT_SHIFT 3 +#define INT_STS_PWRON_IT_MASK 0x04 +#define INT_STS_PWRON_IT_SHIFT 2 +#define INT_STS_VMBHI_IT_MASK 0x02 +#define INT_STS_VMBHI_IT_SHIFT 1 +#define INT_STS_VMBDCH_IT_MASK 0x01 +#define INT_STS_VMBDCH_IT_SHIFT 0 + + +/*Register INT_MSK (0x80) register.RegisterDescription */ +#define INT_MSK_RTC_PERIOD_IT_MSK_MASK 0x80 +#define INT_MSK_RTC_PERIOD_IT_MSK_SHIFT 7 +#define INT_MSK_RTC_ALARM_IT_MSK_MASK 0x40 +#define INT_MSK_RTC_ALARM_IT_MSK_SHIFT 6 +#define INT_MSK_HOTDIE_IT_MSK_MASK 0x20 +#define INT_MSK_HOTDIE_IT_MSK_SHIFT 5 +#define INT_MSK_PWRHOLD_IT_MSK_MASK 0x10 +#define INT_MSK_PWRHOLD_IT_MSK_SHIFT 4 +#define INT_MSK_PWRON_LP_IT_MSK_MASK 0x08 +#define INT_MSK_PWRON_LP_IT_MSK_SHIFT 3 +#define INT_MSK_PWRON_IT_MSK_MASK 0x04 +#define INT_MSK_PWRON_IT_MSK_SHIFT 2 +#define INT_MSK_VMBHI_IT_MSK_MASK 0x02 +#define INT_MSK_VMBHI_IT_MSK_SHIFT 1 +#define INT_MSK_VMBDCH_IT_MSK_MASK 0x01 +#define INT_MSK_VMBDCH_IT_MSK_SHIFT 0 + + +/*Register INT_STS2 (0x80) register.RegisterDescription */ +#define INT_STS2_GPIO3_F_IT_MASK 0x80 +#define INT_STS2_GPIO3_F_IT_SHIFT 7 +#define INT_STS2_GPIO3_R_IT_MASK 0x40 +#define INT_STS2_GPIO3_R_IT_SHIFT 6 +#define INT_STS2_GPIO2_F_IT_MASK 0x20 +#define INT_STS2_GPIO2_F_IT_SHIFT 5 +#define INT_STS2_GPIO2_R_IT_MASK 0x10 +#define INT_STS2_GPIO2_R_IT_SHIFT 4 +#define INT_STS2_GPIO1_F_IT_MASK 0x08 +#define INT_STS2_GPIO1_F_IT_SHIFT 3 +#define INT_STS2_GPIO1_R_IT_MASK 0x04 +#define INT_STS2_GPIO1_R_IT_SHIFT 2 +#define INT_STS2_GPIO0_F_IT_MASK 0x02 +#define INT_STS2_GPIO0_F_IT_SHIFT 1 +#define INT_STS2_GPIO0_R_IT_MASK 0x01 +#define INT_STS2_GPIO0_R_IT_SHIFT 0 + + +/*Register INT_MSK2 (0x80) register.RegisterDescription */ +#define INT_MSK2_GPIO3_F_IT_MSK_MASK 0x80 +#define INT_MSK2_GPIO3_F_IT_MSK_SHIFT 7 +#define INT_MSK2_GPIO3_R_IT_MSK_MASK 0x40 +#define INT_MSK2_GPIO3_R_IT_MSK_SHIFT 6 +#define INT_MSK2_GPIO2_F_IT_MSK_MASK 0x20 +#define INT_MSK2_GPIO2_F_IT_MSK_SHIFT 5 +#define INT_MSK2_GPIO2_R_IT_MSK_MASK 0x10 +#define INT_MSK2_GPIO2_R_IT_MSK_SHIFT 4 +#define INT_MSK2_GPIO1_F_IT_MSK_MASK 0x08 +#define INT_MSK2_GPIO1_F_IT_MSK_SHIFT 3 +#define INT_MSK2_GPIO1_R_IT_MSK_MASK 0x04 +#define INT_MSK2_GPIO1_R_IT_MSK_SHIFT 2 +#define INT_MSK2_GPIO0_F_IT_MSK_MASK 0x02 +#define INT_MSK2_GPIO0_F_IT_MSK_SHIFT 1 +#define INT_MSK2_GPIO0_R_IT_MSK_MASK 0x01 +#define INT_MSK2_GPIO0_R_IT_MSK_SHIFT 0 + + +/*Register INT_STS3 (0x80) register.RegisterDescription */ +#define INT_STS3_GPIO5_F_IT_MASK 0x08 +#define INT_STS3_GPIO5_F_IT_SHIFT 3 +#define INT_STS3_GPIO5_R_IT_MASK 0x04 +#define INT_STS3_GPIO5_R_IT_SHIFT 2 +#define INT_STS3_GPIO4_F_IT_MASK 0x02 +#define INT_STS3_GPIO4_F_IT_SHIFT 1 +#define INT_STS3_GPIO4_R_IT_MASK 0x01 +#define INT_STS3_GPIO4_R_IT_SHIFT 0 + + +/*Register INT_MSK3 (0x80) register.RegisterDescription */ +#define INT_MSK3_GPIO5_F_IT_MSK_MASK 0x08 +#define INT_MSK3_GPIO5_F_IT_MSK_SHIFT 3 +#define INT_MSK3_GPIO5_R_IT_MSK_MASK 0x04 +#define INT_MSK3_GPIO5_R_IT_MSK_SHIFT 2 +#define INT_MSK3_GPIO4_F_IT_MSK_MASK 0x02 +#define INT_MSK3_GPIO4_F_IT_MSK_SHIFT 1 +#define INT_MSK3_GPIO4_R_IT_MSK_MASK 0x01 +#define INT_MSK3_GPIO4_R_IT_MSK_SHIFT 0 + + +/*Register GPIO0 (0x80) register.RegisterDescription */ +#define GPIO0_GPIO_DEB_MASK 0x10 +#define GPIO0_GPIO_DEB_SHIFT 4 +#define GPIO0_GPIO_PUEN_MASK 0x08 +#define GPIO0_GPIO_PUEN_SHIFT 3 +#define GPIO0_GPIO_CFG_MASK 0x04 +#define GPIO0_GPIO_CFG_SHIFT 2 +#define GPIO0_GPIO_STS_MASK 0x02 +#define GPIO0_GPIO_STS_SHIFT 1 +#define GPIO0_GPIO_SET_MASK 0x01 +#define GPIO0_GPIO_SET_SHIFT 0 + + +/*Register GPIO1 (0x80) register.RegisterDescription */ +#define GPIO1_GPIO_DEB_MASK 0x10 +#define GPIO1_GPIO_DEB_SHIFT 4 +#define GPIO1_GPIO_PUEN_MASK 0x08 +#define GPIO1_GPIO_PUEN_SHIFT 3 +#define GPIO1_GPIO_CFG_MASK 0x04 +#define GPIO1_GPIO_CFG_SHIFT 2 +#define GPIO1_GPIO_STS_MASK 0x02 +#define GPIO1_GPIO_STS_SHIFT 1 +#define GPIO1_GPIO_SET_MASK 0x01 +#define GPIO1_GPIO_SET_SHIFT 0 + + +/*Register GPIO2 (0x80) register.RegisterDescription */ +#define GPIO2_GPIO_DEB_MASK 0x10 +#define GPIO2_GPIO_DEB_SHIFT 4 +#define GPIO2_GPIO_PUEN_MASK 0x08 +#define GPIO2_GPIO_PUEN_SHIFT 3 +#define GPIO2_GPIO_CFG_MASK 0x04 +#define GPIO2_GPIO_CFG_SHIFT 2 +#define GPIO2_GPIO_STS_MASK 0x02 +#define GPIO2_GPIO_STS_SHIFT 1 +#define GPIO2_GPIO_SET_MASK 0x01 +#define GPIO2_GPIO_SET_SHIFT 0 + + +/*Register GPIO3 (0x80) register.RegisterDescription */ +#define GPIO3_GPIO_DEB_MASK 0x10 +#define GPIO3_GPIO_DEB_SHIFT 4 +#define GPIO3_GPIO_PUEN_MASK 0x08 +#define GPIO3_GPIO_PUEN_SHIFT 3 +#define GPIO3_GPIO_CFG_MASK 0x04 +#define GPIO3_GPIO_CFG_SHIFT 2 +#define GPIO3_GPIO_STS_MASK 0x02 +#define GPIO3_GPIO_STS_SHIFT 1 +#define GPIO3_GPIO_SET_MASK 0x01 +#define GPIO3_GPIO_SET_SHIFT 0 + + +/*Register GPIO4 (0x80) register.RegisterDescription */ +#define GPIO4_GPIO_DEB_MASK 0x10 +#define GPIO4_GPIO_DEB_SHIFT 4 +#define GPIO4_GPIO_PUEN_MASK 0x08 +#define GPIO4_GPIO_PUEN_SHIFT 3 +#define GPIO4_GPIO_CFG_MASK 0x04 +#define GPIO4_GPIO_CFG_SHIFT 2 +#define GPIO4_GPIO_STS_MASK 0x02 +#define GPIO4_GPIO_STS_SHIFT 1 +#define GPIO4_GPIO_SET_MASK 0x01 +#define GPIO4_GPIO_SET_SHIFT 0 + + +/*Register GPIO5 (0x80) register.RegisterDescription */ +#define GPIO5_GPIO_DEB_MASK 0x10 +#define GPIO5_GPIO_DEB_SHIFT 4 +#define GPIO5_GPIO_PUEN_MASK 0x08 +#define GPIO5_GPIO_PUEN_SHIFT 3 +#define GPIO5_GPIO_CFG_MASK 0x04 +#define GPIO5_GPIO_CFG_SHIFT 2 +#define GPIO5_GPIO_STS_MASK 0x02 +#define GPIO5_GPIO_STS_SHIFT 1 +#define GPIO5_GPIO_SET_MASK 0x01 +#define GPIO5_GPIO_SET_SHIFT 0 + + +/*Register JTAGVERNUM (0x80) register.RegisterDescription */ +#define JTAGVERNUM_VERNUM_MASK 0x0F +#define JTAGVERNUM_VERNUM_SHIFT 0 + + +/* IRQ Definitions */ +#define TPS65910_IRQ_VBAT_VMBDCH 0 +#define TPS65910_IRQ_VBAT_VMHI 1 +#define TPS65910_IRQ_PWRON 2 +#define TPS65910_IRQ_PWRON_LP 3 +#define TPS65910_IRQ_PWRHOLD 4 +#define TPS65910_IRQ_HOTDIE 5 +#define TPS65910_IRQ_RTC_ALARM 6 +#define TPS65910_IRQ_RTC_PERIOD 7 +#define TPS65910_IRQ_GPIO_R 8 +#define TPS65910_IRQ_GPIO_F 9 +#define TPS65910_NUM_IRQ 10 + +/* GPIO Register Definitions */ +#define TPS65910_GPIO_DEB BIT(2) +#define TPS65910_GPIO_PUEN BIT(3) +#define TPS65910_GPIO_CFG BIT(2) +#define TPS65910_GPIO_STS BIT(1) +#define TPS65910_GPIO_SET BIT(0) + +/** + * struct tps65910_board + * Board platform data may be used to initialize regulators. + */ + +struct tps65910_board { + struct regulator_init_data *tps65910_pmic_init_data; +}; + +/** + * struct tps65910 - tps65910 sub-driver chip access routines + */ + +struct tps65910 { + struct device *dev; + struct i2c_client *i2c_client; + struct mutex io_mutex; + int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest); + int (*write)(struct tps65910 *tps65910, u8 reg, int size, void *src); + + /* Client devices */ + struct tps65910_pmic *pmic; + struct tps65910_rtc *rtc; + struct tps65910_power *power; + + /* GPIO Handling */ + struct gpio_chip gpio; + + /* IRQ Handling */ + struct mutex irq_lock; + int chip_irq; + int irq_base; + u16 irq_mask; +}; + +struct tps65910_platform_data { + int irq_base; +}; + +int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask); +int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask); + +#endif /* __LINUX_MFD_TPS65910_H */ -- cgit v1.2.3 From 2537df722d338ab687d7ed91dc589265c0d14aec Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Mon, 2 May 2011 16:19:52 -0500 Subject: TPS65910: GPIO: Add GPIO driver TPS65910 has one configurable GPIO that can be used for several purposes. Subsequent versions of the TPS chip support more than one GPIO. Signed-off-by: Graeme Gregory Signed-off-by: Jorge Eduardo Candelaria Acked-by: Grant Likely Signed-off-by: Liam Girdwood --- drivers/mfd/Makefile | 2 +- drivers/mfd/tps65910-gpio.c | 91 ++++++++++++++++++++++++++++++++++++++++++++ drivers/mfd/tps65910.c | 7 ++++ include/linux/mfd/tps65910.h | 2 + 4 files changed, 101 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/tps65910-gpio.c diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index f43ef5bba3ba..c64fa8d48f45 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -93,4 +93,4 @@ obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o -obj-$(CONFIG_MFD_TPS65910) += tps65910.o +obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-gpio.o diff --git a/drivers/mfd/tps65910-gpio.c b/drivers/mfd/tps65910-gpio.c new file mode 100644 index 000000000000..f3ae37652446 --- /dev/null +++ b/drivers/mfd/tps65910-gpio.c @@ -0,0 +1,91 @@ +/* + * tps65910-gpio.c -- TI TPS6591x + * + * Copyright 2010 Texas Instruments Inc. + * + * Author: Graeme Gregory + * Author: Jorge Eduardo Candelaria jedu@slimlogic.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include + +static int tps65910_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); + uint8_t val; + + tps65910->read(tps65910, TPS65910_GPIO0, 1, &val); + + if (val & GPIO0_GPIO_STS_MASK) + return 1; + + return 0; +} + +static void tps65910_gpio_set(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); + + if (value) + tps65910_set_bits(tps65910, TPS65910_GPIO0, + GPIO0_GPIO_SET_MASK); + else + tps65910_clear_bits(tps65910, TPS65910_GPIO0, + GPIO0_GPIO_SET_MASK); +} + +static int tps65910_gpio_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); + + /* Set the initial value */ + tps65910_gpio_set(gc, 0, value); + + return tps65910_set_bits(tps65910, TPS65910_GPIO0, GPIO0_GPIO_CFG_MASK); +} + +static int tps65910_gpio_input(struct gpio_chip *gc, unsigned offset) +{ + struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); + + return tps65910_clear_bits(tps65910, TPS65910_GPIO0, + GPIO0_GPIO_CFG_MASK); +} + +void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) +{ + int ret; + + if (!gpio_base) + return; + + tps65910->gpio.owner = THIS_MODULE; + tps65910->gpio.label = tps65910->i2c_client->name; + tps65910->gpio.dev = tps65910->dev; + tps65910->gpio.base = gpio_base; + tps65910->gpio.ngpio = 1; + tps65910->gpio.can_sleep = 1; + + tps65910->gpio.direction_input = tps65910_gpio_input; + tps65910->gpio.direction_output = tps65910_gpio_output; + tps65910->gpio.set = tps65910_gpio_set; + tps65910->gpio.get = tps65910_gpio_get; + + ret = gpiochip_add(&tps65910->gpio); + + if (ret) + dev_warn(tps65910->dev, "GPIO registration failed: %d\n", ret); +} diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index dbcdfb55bb8d..5a6a7be1f8cf 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -135,8 +135,13 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct tps65910 *tps65910; + struct tps65910_board *pmic_plat_data; int ret = 0; + pmic_plat_data = dev_get_platdata(&i2c->dev); + if (!pmic_plat_data) + return -EINVAL; + tps65910 = kzalloc(sizeof(struct tps65910), GFP_KERNEL); if (tps65910 == NULL) return -ENOMEM; @@ -154,6 +159,8 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, if (ret < 0) goto err; + tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base); + return ret; err: diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index fa1b029e5499..0e01d504ab58 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -714,6 +714,7 @@ */ struct tps65910_board { + int gpio_base; struct regulator_init_data *tps65910_pmic_init_data; }; @@ -749,5 +750,6 @@ struct tps65910_platform_data { int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask); int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask); +void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base); #endif /* __LINUX_MFD_TPS65910_H */ -- cgit v1.2.3 From e3471bdc2784ee20a0d636c5904200c2d1148ef9 Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Mon, 2 May 2011 16:20:04 -0500 Subject: TPS65910: IRQ: Add interrupt controller This module controls the interrupt handling for the tps chip. The interrupt sources are the following: - GPIO falling/rising edge detection - Battery voltage below/above threshold - PWRON signal - PWRHOLD signal - Temperature detection - RTC alarm and periodic event Signed-off-by: Graeme Gregory Signed-off-by: Jorge Eduardo Candelaria Reviewed-by: Mark Brown Acked-by: Samuel Ortiz Signed-off-by: Liam Girdwood --- drivers/mfd/Makefile | 2 +- drivers/mfd/tps65910-irq.c | 187 +++++++++++++++++++++++++++++++++++++++++++ drivers/mfd/tps65910.c | 12 +++ include/linux/mfd/tps65910.h | 5 ++ 4 files changed, 205 insertions(+), 1 deletion(-) create mode 100644 drivers/mfd/tps65910-irq.c diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index c64fa8d48f45..bdb8eab5668b 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -93,4 +93,4 @@ obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o -obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-gpio.o +obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-gpio.o tps65910-irq.o diff --git a/drivers/mfd/tps65910-irq.c b/drivers/mfd/tps65910-irq.c new file mode 100644 index 000000000000..b8435e045f81 --- /dev/null +++ b/drivers/mfd/tps65910-irq.c @@ -0,0 +1,187 @@ +/* + * tps65910-irq.c -- TI TPS6591x + * + * Copyright 2010 Texas Instruments Inc. + * + * Author: Graeme Gregory + * Author: Jorge Eduardo Candelaria + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static inline int irq_to_tps65910_irq(struct tps65910 *tps65910, + int irq) +{ + return (irq - tps65910->irq_base); +} + +/* + * This is a threaded IRQ handler so can access I2C/SPI. Since all + * interrupts are clear on read the IRQ line will be reasserted and + * the physical IRQ will be handled again if another interrupt is + * asserted while we run - in the normal course of events this is a + * rare occurrence so we save I2C/SPI reads. We're also assuming that + * it's rare to get lots of interrupts firing simultaneously so try to + * minimise I/O. + */ +static irqreturn_t tps65910_irq(int irq, void *irq_data) +{ + struct tps65910 *tps65910 = irq_data; + u16 irq_sts; + u16 irq_mask; + u8 reg; + int i; + + tps65910->read(tps65910, TPS65910_INT_STS, 1, ®); + irq_sts = reg; + tps65910->read(tps65910, TPS65910_INT_STS2, 1, ®); + irq_sts |= reg << 8; + + tps65910->read(tps65910, TPS65910_INT_MSK, 1, ®); + irq_mask = reg; + tps65910->read(tps65910, TPS65910_INT_MSK2, 1, ®); + irq_mask |= reg << 8; + + irq_sts &= ~irq_mask; + + if (!irq_sts) + return IRQ_NONE; + + for (i = 0; i < TPS65910_NUM_IRQ; i++) { + + if (!(irq_sts & (1 << i))) + continue; + + handle_nested_irq(tps65910->irq_base + i); + } + + /* Write the STS register back to clear IRQs we handled */ + reg = irq_sts & 0xFF; + tps65910->write(tps65910, TPS65910_INT_STS, 1, ®); + reg = irq_sts >> 8; + tps65910->write(tps65910, TPS65910_INT_STS2, 1, ®); + + return IRQ_HANDLED; +} + +static void tps65910_irq_lock(struct irq_data *data) +{ + struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data); + + mutex_lock(&tps65910->irq_lock); +} + +static void tps65910_irq_sync_unlock(struct irq_data *data) +{ + struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data); + u16 reg_mask; + u8 reg; + + tps65910->read(tps65910, TPS65910_INT_MSK, 1, ®); + reg_mask = reg; + tps65910->read(tps65910, TPS65910_INT_MSK2, 1, ®); + reg_mask |= reg << 8; + + if (tps65910->irq_mask != reg_mask) { + reg = tps65910->irq_mask & 0xFF; + tps65910->write(tps65910, TPS65910_INT_MSK, 1, ®); + reg = tps65910->irq_mask >> 8; + tps65910->write(tps65910, TPS65910_INT_MSK2, 1, ®); + } + mutex_unlock(&tps65910->irq_lock); +} + +static void tps65910_irq_enable(struct irq_data *data) +{ + struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data); + + tps65910->irq_mask &= ~( 1 << irq_to_tps65910_irq(tps65910, data->irq)); +} + +static void tps65910_irq_disable(struct irq_data *data) +{ + struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data); + + tps65910->irq_mask |= ( 1 << irq_to_tps65910_irq(tps65910, data->irq)); +} + +static struct irq_chip tps65910_irq_chip = { + .name = "tps65910", + .irq_bus_lock = tps65910_irq_lock, + .irq_bus_sync_unlock = tps65910_irq_sync_unlock, + .irq_disable = tps65910_irq_disable, + .irq_enable = tps65910_irq_enable, +}; + +int tps65910_irq_init(struct tps65910 *tps65910, int irq, + struct tps65910_platform_data *pdata) +{ + int ret, cur_irq; + int flags = IRQF_ONESHOT; + u8 reg; + + if (!irq) { + dev_warn(tps65910->dev, "No interrupt support, no core IRQ\n"); + return -EINVAL; + } + + if (!pdata || !pdata->irq_base) { + dev_warn(tps65910->dev, "No interrupt support, no IRQ base\n"); + return -EINVAL; + } + + /* Mask top level interrupts */ + reg = 0xFF; + tps65910->write(tps65910, TPS65910_INT_MSK, 1, ®); + reg = 0x03; + tps65910->write(tps65910, TPS65910_INT_MSK2, 1, ®); + + mutex_init(&tps65910->irq_lock); + tps65910->chip_irq = irq; + tps65910->irq_base = pdata->irq_base; + + /* Register with genirq */ + for (cur_irq = tps65910->irq_base; + cur_irq < TPS65910_NUM_IRQ + tps65910->irq_base; + cur_irq++) { + irq_set_chip_data(cur_irq, tps65910); + irq_set_chip_and_handler(cur_irq, &tps65910_irq_chip, + handle_edge_irq); + irq_set_nested_thread(cur_irq, 1); + + /* ARM needs us to explicitly flag the IRQ as valid + * and will set them noprobe when we do so. */ +#ifdef CONFIG_ARM + set_irq_flags(cur_irq, IRQF_VALID); +#else + irq_set_noprobe(cur_irq); +#endif + } + + ret = request_threaded_irq(irq, NULL, tps65910_irq, flags, + "tps65910", tps65910); + if (ret != 0) + dev_err(tps65910->dev, "Failed to request IRQ: %d\n", ret); + + return ret; +} + +int tps65910_irq_exit(struct tps65910 *tps65910) +{ + free_irq(tps65910->chip_irq, tps65910); + return 0; +} diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 5a6a7be1f8cf..bf649cf6a0ae 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -136,12 +136,20 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, { struct tps65910 *tps65910; struct tps65910_board *pmic_plat_data; + struct tps65910_platform_data *init_data; int ret = 0; pmic_plat_data = dev_get_platdata(&i2c->dev); if (!pmic_plat_data) return -EINVAL; + init_data = kzalloc(sizeof(struct tps65910_platform_data), GFP_KERNEL); + if (init_data == NULL) + return -ENOMEM; + + init_data->irq = pmic_plat_data->irq; + init_data->irq_base = pmic_plat_data->irq; + tps65910 = kzalloc(sizeof(struct tps65910), GFP_KERNEL); if (tps65910 == NULL) return -ENOMEM; @@ -161,6 +169,10 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, tps65910_gpio_init(tps65910, pmic_plat_data->gpio_base); + ret = tps65910_irq_init(tps65910, init_data->irq, init_data); + if (ret < 0) + goto err; + return ret; err: diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 0e01d504ab58..8afe91c85587 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -715,6 +715,8 @@ struct tps65910_board { int gpio_base; + int irq; + int irq_base; struct regulator_init_data *tps65910_pmic_init_data; }; @@ -745,11 +747,14 @@ struct tps65910 { }; struct tps65910_platform_data { + int irq; int irq_base; }; int tps65910_set_bits(struct tps65910 *tps65910, u8 reg, u8 mask); int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask); void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base); +int tps65910_irq_init(struct tps65910 *tps65910, int irq, + struct tps65910_platform_data *pdata); #endif /* __LINUX_MFD_TPS65910_H */ -- cgit v1.2.3 From 518fb721de3685c8326e72746151b534a241feda Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Mon, 2 May 2011 16:20:08 -0500 Subject: TPS65910: Add tps65910 regulator driver The regulator module consists of 3 DCDCs and 8 LDOs. The output voltages are configurable and are meant to supply power to the main processor and other components Signed-off-by: Graeme Gregory Signed-off-by: Jorge Eduardo Candelaria Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/Kconfig | 6 + drivers/regulator/Makefile | 1 + drivers/regulator/tps65910-regulator.c | 705 +++++++++++++++++++++++++++++++++ include/linux/mfd/tps65910.h | 14 + 4 files changed, 726 insertions(+) create mode 100644 drivers/regulator/tps65910-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index f0b13a0d1851..d7ed20f293d7 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -297,5 +297,11 @@ config REGULATOR_TPS6524X serial interface currently supported on the sequencer serial port controller. +config REGULATOR_TPS65910 + tristate "TI TPS65910 Power Regulator" + depends on MFD_TPS65910 + help + This driver supports TPS65910 voltage regulator chips. + endif diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 165ff5371e9e..3932d2ec38f3 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -42,5 +42,6 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o obj-$(CONFIG_REGULATOR_DB8500_PRCMU) += db8500-prcmu.o +obj-$(CONFIG_REGULATOR_TPS65910) += tps65910-regulator.o ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c new file mode 100644 index 000000000000..d461fa7906b8 --- /dev/null +++ b/drivers/regulator/tps65910-regulator.c @@ -0,0 +1,705 @@ +/* + * tps65910.c -- TI tps65910 + * + * Copyright 2010 Texas Instruments Inc. + * + * Author: Graeme Gregory + * Author: Jorge Eduardo Candelaria + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TPS65910_REG_VRTC 0 +#define TPS65910_REG_VIO 1 +#define TPS65910_REG_VDD1 2 +#define TPS65910_REG_VDD2 3 +#define TPS65910_REG_VDD3 4 +#define TPS65910_REG_VDIG1 5 +#define TPS65910_REG_VDIG2 6 +#define TPS65910_REG_VPLL 7 +#define TPS65910_REG_VDAC 8 +#define TPS65910_REG_VAUX1 9 +#define TPS65910_REG_VAUX2 10 +#define TPS65910_REG_VAUX33 11 +#define TPS65910_REG_VMMC 12 + +#define TPS65910_NUM_REGULATOR 13 + +#define TPS65910_SUPPLY_STATE_ENABLED 0x1 + +/* supported VIO voltages in milivolts */ +static const u16 VIO_VSEL_table[] = { + 1500, 1800, 2500, 3300, +}; + +/* supported VIO voltages in milivolts */ +static const u16 VDD3_VSEL_table[] = { + 5000, +}; + +/* supported VDIG1 voltages in milivolts */ +static const u16 VDIG1_VSEL_table[] = { + 1200, 1500, 1800, 2700, +}; + +/* supported VDIG2 voltages in milivolts */ +static const u16 VDIG2_VSEL_table[] = { + 1000, 1100, 1200, 1800, +}; + +/* supported VPLL voltages in milivolts */ +static const u16 VPLL_VSEL_table[] = { + 1000, 1100, 1800, 2500, +}; + +/* supported VDAC voltages in milivolts */ +static const u16 VDAC_VSEL_table[] = { + 1800, 2600, 2800, 2850, +}; + +/* supported VAUX1 voltages in milivolts */ +static const u16 VAUX1_VSEL_table[] = { + 1800, 2500, 2800, 2850, +}; + +/* supported VAUX2 voltages in milivolts */ +static const u16 VAUX2_VSEL_table[] = { + 1800, 2800, 2900, 3300, +}; + +/* supported VAUX33 voltages in milivolts */ +static const u16 VAUX33_VSEL_table[] = { + 1800, 2000, 2800, 3300, +}; + +/* supported VMMC voltages in milivolts */ +static const u16 VMMC_VSEL_table[] = { + 1800, 2800, 3000, 3300, +}; + +struct tps_info { + const char *name; + unsigned min_uV; + unsigned max_uV; + u8 table_len; + const u16 *table; +}; + +static struct tps_info tps65910_regs[] = { + { + .name = "VRTC", + }, + { + .name = "VIO", + .min_uV = 1500000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(VIO_VSEL_table), + .table = VIO_VSEL_table, + }, + { + .name = "VDD1", + .min_uV = 600000, + .max_uV = 4500000, + }, + { + .name = "VDD2", + .min_uV = 600000, + .max_uV = 4500000, + }, + { + .name = "VDD3", + .min_uV = 5000000, + .max_uV = 5000000, + .table_len = ARRAY_SIZE(VDD3_VSEL_table), + .table = VDD3_VSEL_table, + }, + { + .name = "VDIG1", + .min_uV = 1200000, + .max_uV = 2700000, + .table_len = ARRAY_SIZE(VDIG1_VSEL_table), + .table = VDIG1_VSEL_table, + }, + { + .name = "VDIG2", + .min_uV = 1000000, + .max_uV = 1800000, + .table_len = ARRAY_SIZE(VDIG2_VSEL_table), + .table = VDIG2_VSEL_table, + }, + { + .name = "VPLL", + .min_uV = 1000000, + .max_uV = 2500000, + .table_len = ARRAY_SIZE(VPLL_VSEL_table), + .table = VPLL_VSEL_table, + }, + { + .name = "VDAC", + .min_uV = 1800000, + .max_uV = 2850000, + .table_len = ARRAY_SIZE(VDAC_VSEL_table), + .table = VDAC_VSEL_table, + }, + { + .name = "VAUX1", + .min_uV = 1800000, + .max_uV = 2850000, + .table_len = ARRAY_SIZE(VAUX1_VSEL_table), + .table = VAUX1_VSEL_table, + }, + { + .name = "VAUX2", + .min_uV = 1800000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(VAUX2_VSEL_table), + .table = VAUX2_VSEL_table, + }, + { + .name = "VAUX33", + .min_uV = 1800000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(VAUX33_VSEL_table), + .table = VAUX33_VSEL_table, + }, + { + .name = "VMMC", + .min_uV = 1800000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(VMMC_VSEL_table), + .table = VMMC_VSEL_table, + }, +}; + +struct tps65910_reg { + struct regulator_desc desc[TPS65910_NUM_REGULATOR]; + struct tps65910 *mfd; + struct regulator_dev *rdev[TPS65910_NUM_REGULATOR]; + struct tps_info *info[TPS65910_NUM_REGULATOR]; + struct mutex mutex; + int mode; +}; + +static inline int tps65910_read(struct tps65910_reg *pmic, u8 reg) +{ + u8 val; + int err; + + err = pmic->mfd->read(pmic->mfd, reg, 1, &val); + if (err) + return err; + + return val; +} + +static inline int tps65910_write(struct tps65910_reg *pmic, u8 reg, u8 val) +{ + return pmic->mfd->write(pmic->mfd, reg, 1, &val); +} + +static int tps65910_modify_bits(struct tps65910_reg *pmic, u8 reg, + u8 set_mask, u8 clear_mask) +{ + int err, data; + + mutex_lock(&pmic->mutex); + + data = tps65910_read(pmic, reg); + if (data < 0) { + dev_err(pmic->mfd->dev, "Read from reg 0x%x failed\n", reg); + err = data; + goto out; + } + + data &= ~clear_mask; + data |= set_mask; + err = tps65910_write(pmic, reg, data); + if (err) + dev_err(pmic->mfd->dev, "Write for reg 0x%x failed\n", reg); + +out: + mutex_unlock(&pmic->mutex); + return err; +} + +static int tps65910_reg_read(struct tps65910_reg *pmic, u8 reg) +{ + int data; + + mutex_lock(&pmic->mutex); + + data = tps65910_read(pmic, reg); + if (data < 0) + dev_err(pmic->mfd->dev, "Read from reg 0x%x failed\n", reg); + + mutex_unlock(&pmic->mutex); + return data; +} + +static int tps65910_reg_write(struct tps65910_reg *pmic, u8 reg, u8 val) +{ + int err; + + mutex_lock(&pmic->mutex); + + err = tps65910_write(pmic, reg, val); + if (err < 0) + dev_err(pmic->mfd->dev, "Write for reg 0x%x failed\n", reg); + + mutex_unlock(&pmic->mutex); + return err; +} + +static int tps65910_get_ctrl_register(int id) +{ + switch (id) { + case TPS65910_REG_VRTC: + return TPS65910_VRTC; + case TPS65910_REG_VIO: + return TPS65910_VIO; + case TPS65910_REG_VDD1: + return TPS65910_VDD1; + case TPS65910_REG_VDD2: + return TPS65910_VDD2; + case TPS65910_REG_VDD3: + return TPS65910_VDD3; + case TPS65910_REG_VDIG1: + return TPS65910_VDIG1; + case TPS65910_REG_VDIG2: + return TPS65910_VDIG2; + case TPS65910_REG_VPLL: + return TPS65910_VPLL; + case TPS65910_REG_VDAC: + return TPS65910_VDAC; + case TPS65910_REG_VAUX1: + return TPS65910_VAUX1; + case TPS65910_REG_VAUX2: + return TPS65910_VAUX2; + case TPS65910_REG_VAUX33: + return TPS65910_VAUX33; + case TPS65910_REG_VMMC: + return TPS65910_VMMC; + default: + return -EINVAL; + } +} + +static int tps65910_is_enabled(struct regulator_dev *dev) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + int reg, value, id = rdev_get_id(dev); + + reg = tps65910_get_ctrl_register(id); + if (reg < 0) + return reg; + + value = tps65910_reg_read(pmic, reg); + if (value < 0) + return value; + + return value & TPS65910_SUPPLY_STATE_ENABLED; +} + +static int tps65910_enable(struct regulator_dev *dev) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + struct tps65910 *mfd = pmic->mfd; + int reg, id = rdev_get_id(dev); + + reg = tps65910_get_ctrl_register(id); + if (reg < 0) + return reg; + + return tps65910_set_bits(mfd, reg, TPS65910_SUPPLY_STATE_ENABLED); +} + +static int tps65910_disable(struct regulator_dev *dev) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + struct tps65910 *mfd = pmic->mfd; + int reg, id = rdev_get_id(dev); + + reg = tps65910_get_ctrl_register(id); + if (reg < 0) + return reg; + + return tps65910_clear_bits(mfd, reg, TPS65910_SUPPLY_STATE_ENABLED); +} + + +static int tps65910_set_mode(struct regulator_dev *dev, unsigned int mode) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + struct tps65910 *mfd = pmic->mfd; + int reg, value, id = rdev_get_id(dev); + reg = tps65910_get_ctrl_register(id); + if (reg < 0) + return reg; + + switch (mode) { + case REGULATOR_MODE_NORMAL: + return tps65910_modify_bits(pmic, reg, LDO_ST_ON_BIT, + LDO_ST_MODE_BIT); + case REGULATOR_MODE_IDLE: + value = LDO_ST_ON_BIT | LDO_ST_MODE_BIT; + return tps65910_set_bits(mfd, reg, value); + case REGULATOR_MODE_STANDBY: + return tps65910_clear_bits(mfd, reg, LDO_ST_ON_BIT); + } + + return -EINVAL; +} + +static unsigned int tps65910_get_mode(struct regulator_dev *dev) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + int reg, value, id = rdev_get_id(dev); + + reg = tps65910_get_ctrl_register(id); + if (reg < 0) + return reg; + + value = tps65910_reg_read(pmic, reg); + if (value < 0) + return value; + + if (value & LDO_ST_ON_BIT) + return REGULATOR_MODE_STANDBY; + else if (value & LDO_ST_MODE_BIT) + return REGULATOR_MODE_IDLE; + else + return REGULATOR_MODE_NORMAL; +} + +static int tps65910_get_voltage_dcdc(struct regulator_dev *dev) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + int id = rdev_get_id(dev), voltage = 0; + int opvsel = 0, srvsel = 0, mult = 0, sr = 0; + + switch (id) { + case TPS65910_REG_VDD1: + opvsel = tps65910_reg_read(pmic, TPS65910_VDD1_OP); + mult = tps65910_reg_read(pmic, TPS65910_VDD1); + mult = (mult & VDD1_VGAIN_SEL_MASK) >> VDD1_VGAIN_SEL_SHIFT; + srvsel = tps65910_reg_read(pmic, TPS65910_VDD1_SR); + sr = opvsel & VDD1_OP_CMD_MASK; + opvsel &= VDD1_OP_SEL_MASK; + srvsel &= VDD1_SR_SEL_MASK; + break; + case TPS65910_REG_VDD2: + opvsel = tps65910_reg_read(pmic, TPS65910_VDD2_OP); + mult = tps65910_reg_read(pmic, TPS65910_VDD2); + mult = (mult & VDD2_VGAIN_SEL_MASK) >> VDD2_VGAIN_SEL_SHIFT; + srvsel = tps65910_reg_read(pmic, TPS65910_VDD2_SR); + sr = opvsel & VDD2_OP_CMD_MASK; + opvsel &= VDD2_OP_SEL_MASK; + srvsel &= VDD2_SR_SEL_MASK; + break; + } + + /* multiplier 0 == 1 but 2,3 normal */ + if (!mult) + mult=1; + + if (sr) { + /* Valid range is 3-75 so normalise */ + if (srvsel < 3) srvsel = 3; + if (srvsel > 75) srvsel = 75; + srvsel -= 3; + + voltage = (srvsel * VDD1_2_OFFSET + VDD1_2_MIN_VOLT) * 100; + } else { + + /* Valid range is 3-75 so normalise */ + if (opvsel < 3) opvsel = 3; + if (opvsel > 75) opvsel = 75; + opvsel -= 3; + + voltage = (opvsel * VDD1_2_OFFSET + VDD1_2_MIN_VOLT) * 100; + } + + voltage *= mult; + + return voltage; +} + +static int tps65910_get_voltage(struct regulator_dev *dev) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + int reg, value, id = rdev_get_id(dev), voltage = 0; + + reg = tps65910_get_ctrl_register(id); + if (reg < 0) + return reg; + + value = tps65910_reg_read(pmic, reg); + if (value < 0) + return value; + + switch (id) { + case TPS65910_REG_VIO: + case TPS65910_REG_VDIG1: + case TPS65910_REG_VDIG2: + case TPS65910_REG_VPLL: + case TPS65910_REG_VDAC: + case TPS65910_REG_VAUX1: + case TPS65910_REG_VAUX2: + case TPS65910_REG_VAUX33: + case TPS65910_REG_VMMC: + value &= LDO_SEL_MASK; + value >>= LDO_SEL_SHIFT; + break; + default: + return -EINVAL; + } + + voltage = pmic->info[id]->table[value] * 1000; + + return voltage; +} + +static int tps65910_get_voltage_vdd3(struct regulator_dev *dev) +{ + return 5 * 1000 * 1000; +} + +static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, + unsigned selector) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + int id = rdev_get_id(dev), vsel; + int dcdc_mult; + + /* Split vsel into appropriate registers */ + dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + if (dcdc_mult == 1) dcdc_mult--; + + vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + + if (id == TPS65910_REG_VDD1) { + tps65910_modify_bits(pmic, TPS65910_VDD1, + (dcdc_mult << VDD1_VGAIN_SEL_SHIFT), + VDD1_VGAIN_SEL_MASK); + tps65910_reg_write(pmic, TPS65910_VDD1_OP, vsel); + } else { + tps65910_modify_bits(pmic, TPS65910_VDD2, + (dcdc_mult << VDD2_VGAIN_SEL_SHIFT), + VDD1_VGAIN_SEL_MASK); + tps65910_reg_write(pmic, TPS65910_VDD2_OP, vsel); + } + + return 0; +} + +static int tps65910_set_voltage(struct regulator_dev *dev, unsigned selector) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + int reg, id = rdev_get_id(dev); + + reg = tps65910_get_ctrl_register(id); + if (reg < 0) + return reg; + + switch (id) { + case TPS65910_REG_VIO: + case TPS65910_REG_VDIG1: + case TPS65910_REG_VDIG2: + case TPS65910_REG_VPLL: + case TPS65910_REG_VDAC: + case TPS65910_REG_VAUX1: + case TPS65910_REG_VAUX2: + case TPS65910_REG_VAUX33: + case TPS65910_REG_VMMC: + return tps65910_modify_bits(pmic, reg, + (selector << LDO_SEL_SHIFT), LDO_SEL_MASK); + } + + return -EINVAL; +} + +static int tps65910_list_voltage_dcdc(struct regulator_dev *dev, + unsigned selector) +{ + int mult, volt; + + mult = (selector / VDD1_2_NUM_VOLTS) + 1; + + volt = VDD1_2_MIN_VOLT + (selector % VDD1_2_NUM_VOLTS) * VDD1_2_OFFSET; + + return volt * 100 * mult; +} + +static int tps65910_list_voltage(struct regulator_dev *dev, + unsigned selector) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + int id = rdev_get_id(dev), voltage; + + if (id < TPS65910_REG_VIO || id > TPS65910_REG_VMMC) + return -EINVAL; + + if (selector >= pmic->info[id]->table_len) + return -EINVAL; + else + voltage = pmic->info[id]->table[selector] * 1000; + + return voltage; +} + +/* Regulator ops (except VRTC) */ +static struct regulator_ops tps65910_ops_dcdc = { + .is_enabled = tps65910_is_enabled, + .enable = tps65910_enable, + .disable = tps65910_disable, + .set_mode = tps65910_set_mode, + .get_mode = tps65910_get_mode, + .get_voltage = tps65910_get_voltage_dcdc, + .set_voltage_sel = tps65910_set_voltage_dcdc, + .list_voltage = tps65910_list_voltage_dcdc, +}; + +static struct regulator_ops tps65910_ops_vdd3 = { + .is_enabled = tps65910_is_enabled, + .enable = tps65910_enable, + .disable = tps65910_disable, + .set_mode = tps65910_set_mode, + .get_mode = tps65910_get_mode, + .get_voltage = tps65910_get_voltage_vdd3, + .list_voltage = tps65910_list_voltage, +}; + +static struct regulator_ops tps65910_ops = { + .is_enabled = tps65910_is_enabled, + .enable = tps65910_enable, + .disable = tps65910_disable, + .set_mode = tps65910_set_mode, + .get_mode = tps65910_get_mode, + .get_voltage = tps65910_get_voltage, + .set_voltage_sel = tps65910_set_voltage, + .list_voltage = tps65910_list_voltage, +}; + +static __devinit int tps65910_probe(struct platform_device *pdev) +{ + struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent); + struct tps_info *info = tps65910_regs; + struct regulator_init_data *reg_data; + struct regulator_dev *rdev; + struct tps65910_reg *pmic; + struct tps65910_board *pmic_plat_data; + static int desc_id; + int i, err; + + pmic_plat_data = dev_get_platdata(tps65910->dev); + if (!pmic_plat_data) + return -EINVAL; + + reg_data = pmic_plat_data->tps65910_pmic_init_data; + + pmic = kzalloc(sizeof(*pmic), GFP_KERNEL); + if (!pmic) + return -ENOMEM; + + mutex_init(&pmic->mutex); + pmic->mfd = tps65910; + platform_set_drvdata(pdev, pmic); + + /* Give control of all register to control port */ + tps65910_set_bits(pmic->mfd, TPS65910_DEVCTRL, + DEVCTRL_SR_CTL_I2C_SEL_MASK); + + for (i = 0; i < TPS65910_NUM_REGULATOR; i++, info++, reg_data++) { + /* Register the regulators */ + pmic->info[i] = info; + + pmic->desc[i].name = info->name; + pmic->desc[i].id = desc_id++; + pmic->desc[i].n_voltages = info->table_len; + + if ((i == TPS65910_REG_VDD1) || (i == TPS65910_REG_VDD2)) + pmic->desc[i].ops = &tps65910_ops_dcdc; + else if (i == TPS65910_REG_VDD3) + pmic->desc[i].ops = &tps65910_ops_vdd3; + else + pmic->desc[i].ops = &tps65910_ops; + + pmic->desc[i].type = REGULATOR_VOLTAGE; + pmic->desc[i].owner = THIS_MODULE; + + rdev = regulator_register(&pmic->desc[i], + tps65910->dev, reg_data, pmic); + if (IS_ERR(rdev)) { + dev_err(tps65910->dev, + "failed to register %s regulator\n", + pdev->name); + err = PTR_ERR(rdev); + goto err; + } + + /* Save regulator for cleanup */ + pmic->rdev[i] = rdev; + } + return 0; + +err: + while (--i >= 0) + regulator_unregister(pmic->rdev[i]); + + kfree(pmic); + return err; +} + +static int __devexit tps65910_remove(struct platform_device *pdev) +{ + struct tps65910_reg *tps65910_reg = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < TPS65910_NUM_REGULATOR; i++) + regulator_unregister(tps65910_reg->rdev[i]); + + kfree(tps65910_reg); + return 0; +} + +static struct platform_driver tps65910_driver = { + .driver = { + .name = "tps65910-pmic", + .owner = THIS_MODULE, + }, + .probe = tps65910_probe, + .remove = __devexit_p(tps65910_remove), +}; + +static int __init tps65910_init(void) +{ + return platform_driver_register(&tps65910_driver); +} +subsys_initcall(tps65910_init); + +static void __exit tps65910_cleanup(void) +{ + platform_driver_unregister(&tps65910_driver); +} +module_exit(tps65910_cleanup); + +MODULE_AUTHOR("Graeme Gregory "); +MODULE_DESCRIPTION("TPS6507x voltage regulator driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:tps65910-pmic"); diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 8afe91c85587..be08a0c7e7de 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -215,12 +215,26 @@ #define VDD2_SR_SEL_SHIFT 0 +/*Registers VDD1, VDD2 voltage values definitions */ +#define VDD1_2_NUM_VOLTS 73 +#define VDD1_2_MIN_VOLT 6000 +#define VDD1_2_OFFSET 125 + + /*Register VDD3 (0x80) register.RegisterDescription */ #define VDD3_CKINEN_MASK 0x04 #define VDD3_CKINEN_SHIFT 2 #define VDD3_ST_MASK 0x03 #define VDD3_ST_SHIFT 0 +/*Registers VDIG (0x80) to VDAC register.RegisterDescription */ +#define LDO_SEL_MASK 0x0C +#define LDO_SEL_SHIFT 2 +#define LDO_ST_MASK 0x03 +#define LDO_ST_SHIFT 0 +#define LDO_ST_ON_BIT 0x01 +#define LDO_ST_MODE_BIT 0x02 + /*Register VDIG1 (0x80) register.RegisterDescription */ #define VDIG1_SEL_MASK 0x0C -- cgit v1.2.3 From aec519b5ec95e2d8b33b7620a2830afc55707e40 Mon Sep 17 00:00:00 2001 From: Jorge Eduardo Candelaria Date: Tue, 10 May 2011 12:30:36 -0500 Subject: linux-next: build failure after merge of the voltage tree On May 10, 2011, at 3:38 AM, Liam Girdwood wrote: > On Tue, 2011-05-10 at 12:44 +1000, Stephen Rothwell wrote: >> Hi Liam, >> >> After merging the voltage tree, today's linux-next build (x86_64 >> allmodconfig) failed like this: >> >> ERROR: "tps65910_gpio_init" [drivers/mfd/tps65910.ko] undefined! >> ERROR: "tps65910_irq_init" [drivers/mfd/tps65910.ko] undefined! >> ERROR: "irq_modify_status" [drivers/mfd/tps65910-irq.ko] undefined! >> ERROR: "irq_set_chip_and_handler_name" [drivers/mfd/tps65910-irq.ko] undefined! >> ERROR: "handle_edge_irq" [drivers/mfd/tps65910-irq.ko] undefined! >> >> I have used the voltage tree from next-20110509 for today. > > Jorge, could you send a fix for this today. > > Thanks > > Liam > The following patch should solve this: From: Jorge Eduardo Candelaria MFD: Fix TPS65910 build Support for tps65910 as a module is not available. The driver can only be compiled as built-in. OTOH, the regulator driver can still be built as module without breaking the compilation. Signed-off-by: Jorge Eduardo Candelaria Signed-off-by: Liam Girdwood --- drivers/mfd/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index d67511a67fdd..05f882f5d278 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -720,8 +720,8 @@ config MFD_PM8XXX_IRQ and MPP. config MFD_TPS65910 - tristate "TPS65910 Power Management chip" - depends on I2C && GPIOLIB + bool "TPS65910 Power Management chip" + depends on I2C && GPIOLIB select MFD_CORE help if you say yes here you get support for the TPS65910 series of -- cgit v1.2.3 From cda53103284f87a8f2c1eb5b075131c2bd45bc95 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 10 May 2011 15:52:57 +0200 Subject: regulator: Remove some unused variables from wm831x DCDCs These became unused with the IRQ removal patch, I'm fairly sure that a patch was sent earlier by someone else but it doesn't seem to have been applied and I don't have a copy sitting around any more. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/wm831x-dcdc.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index e93453b1b978..a0982e809851 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -600,7 +600,6 @@ err: static __devexit int wm831x_buckv_remove(struct platform_device *pdev) { struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); - struct wm831x *wm831x = dcdc->wm831x; platform_set_drvdata(pdev, NULL); @@ -776,7 +775,6 @@ err: static __devexit int wm831x_buckp_remove(struct platform_device *pdev) { struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev); - struct wm831x *wm831x = dcdc->wm831x; platform_set_drvdata(pdev, NULL); -- cgit v1.2.3 From 327e15af15248563c896c16adad6fc6e04bb5a4d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 10 May 2011 19:10:36 +0800 Subject: Revert "regulator: Move VCOINCELL to be the last element of mc13892_regulators array" I check this patch again and found this actually is not a bug because MC13xxx_DEFINE explictly defines the order of each entry in the array. Thus revert the patch. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/mc13892-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index c1ed67ec5148..33d43b26d53b 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -259,6 +259,7 @@ static struct regulator_ops mc13892_sw_regulator_ops; mc13xxx_regulator_ops) static struct mc13xxx_regulator mc13892_regulators[] = { + MC13892_DEFINE_REGU(VCOINCELL, POWERCTL0, POWERCTL0, mc13892_vcoincell), MC13892_SW_DEFINE(SW1, SWITCHERS0, SWITCHERS0, mc13892_sw1), MC13892_SW_DEFINE(SW2, SWITCHERS1, SWITCHERS1, mc13892_sw), MC13892_SW_DEFINE(SW3, SWITCHERS2, SWITCHERS2, mc13892_sw), @@ -292,7 +293,6 @@ static struct mc13xxx_regulator mc13892_regulators[] = { MC13892_GPO_DEFINE(GPO4, POWERMISC, mc13892_gpo), MC13892_GPO_DEFINE(PWGT1SPI, POWERMISC, mc13892_pwgtdrv), MC13892_GPO_DEFINE(PWGT2SPI, POWERMISC, mc13892_pwgtdrv), - MC13892_DEFINE_REGU(VCOINCELL, POWERCTL0, POWERCTL0, mc13892_vcoincell), }; static int mc13892_powermisc_rmw(struct mc13xxx_regulator_priv *priv, u32 mask, -- cgit v1.2.3 From c01e36dde4632e0a7474fddf0716f1e54f01f13e Mon Sep 17 00:00:00 2001 From: Jorge Eduardo Candelaria Date: Wed, 11 May 2011 01:43:02 -0500 Subject: linux-next: build failure after merge of the voltage tree On May 10, 2011, at 9:27 PM, Stephen Rothwell wrote: > Hi Jorge, > > On Tue, 10 May 2011 12:30:36 -0500 Jorge Eduardo Candelaria wrote: >> >> On May 10, 2011, at 3:38 AM, Liam Girdwood wrote: >> >>> On Tue, 2011-05-10 at 12:44 +1000, Stephen Rothwell wrote: >>>> Hi Liam, >>>> >>>> After merging the voltage tree, today's linux-next build (x86_64 >>>> allmodconfig) failed like this: >>>> >>>> ERROR: "tps65910_gpio_init" [drivers/mfd/tps65910.ko] undefined! >>>> ERROR: "tps65910_irq_init" [drivers/mfd/tps65910.ko] undefined! >>>> ERROR: "irq_modify_status" [drivers/mfd/tps65910-irq.ko] undefined! >>>> ERROR: "irq_set_chip_and_handler_name" [drivers/mfd/tps65910-irq.ko] undefined! >>>> ERROR: "handle_edge_irq" [drivers/mfd/tps65910-irq.ko] undefined! >>>> >>>> I have used the voltage tree from next-20110509 for today. >>> >>> Jorge, could you send a fix for this today. >> >> The following patch should solve this: >> >> From: Jorge Eduardo Candelaria >> MFD: Fix TPS65910 build >> >> Support for tps65910 as a module is not available. The driver can >> only be compiled as built-in. OTOH, the regulator driver can still >> be built as module without breaking the compilation. >> >> Signed-off-by: Jorge Eduardo Candelaria > > Today (even with the above patch included) I got these errors from the > x86_64 allmodconfig build: > > tps65910.c:(.text+0xf4140): undefined reference to `i2c_master_send' > drivers/built-in.o: In function `tps65910_i2c_read': > tps65910.c:(.text+0xf41d2): undefined reference to `i2c_transfer' > drivers/built-in.o: In function `tps65910_i2c_init': > tps65910.c:(.init.text+0xcb83): undefined reference to `i2c_register_driver' > drivers/built-in.o: In function `tps65910_i2c_exit': > tps65910.c:(.exit.text+0x6e0): undefined reference to `i2c_del_driver' > > I have used the voltage tree from next-20110509 again today. Following patch should fix the dependency problems. Please review: From: Jorge Eduardo Candelaria [PATCH] MFD: TPS65910: Fix I2C dependency TPS65910 driver can only be compiled built-in, so the I2C driver should be as well. Signed-off-by: Jorge Eduardo Candelaria Signed-off-by: Liam Girdwood --- drivers/mfd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 05f882f5d278..4990a492a09b 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -721,7 +721,7 @@ config MFD_PM8XXX_IRQ config MFD_TPS65910 bool "TPS65910 Power Management chip" - depends on I2C && GPIOLIB + depends on I2C=y && GPIOLIB select MFD_CORE help if you say yes here you get support for the TPS65910 series of -- cgit v1.2.3 From 77fa44d0e10711e899788c58fe53f8f7b18c7f67 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 12 May 2011 13:47:50 +0800 Subject: regulator: Fix desc_id for tps65023/6507x/65910 The desc_id variable should not be a static variable. The rest of the code assumes the desc_id must less than TPSxxxxx_NUM_REGULATOR. If we set desc_id to be a static variable, checking the return value of rdev_get_id() may return error. Signed-off-by: Axel Lin Cc: Anuj Aggarwal Cc: Graeme Gregory Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/tps65023-regulator.c | 3 +-- drivers/regulator/tps6507x-regulator.c | 3 +-- drivers/regulator/tps65910-regulator.c | 3 +-- 3 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c index 60a7ca5409e9..fbddc15e1811 100644 --- a/drivers/regulator/tps65023-regulator.c +++ b/drivers/regulator/tps65023-regulator.c @@ -466,7 +466,6 @@ static struct regulator_ops tps65023_ldo_ops = { static int __devinit tps_65023_probe(struct i2c_client *client, const struct i2c_device_id *id) { - static int desc_id; const struct tps_info *info = (void *)id->driver_data; struct regulator_init_data *init_data; struct regulator_dev *rdev; @@ -499,7 +498,7 @@ static int __devinit tps_65023_probe(struct i2c_client *client, tps->info[i] = info; tps->desc[i].name = info->name; - tps->desc[i].id = desc_id++; + tps->desc[i].id = i; tps->desc[i].n_voltages = num_voltages[i]; tps->desc[i].ops = (i > TPS65023_DCDC_3 ? &tps65023_ldo_ops : &tps65023_dcdc_ops); diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c index 064755290599..bfffabc21eda 100644 --- a/drivers/regulator/tps6507x-regulator.c +++ b/drivers/regulator/tps6507x-regulator.c @@ -553,7 +553,6 @@ static __devinit int tps6507x_pmic_probe(struct platform_device *pdev) { struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent); - static int desc_id; struct tps_info *info = &tps6507x_pmic_regs[0]; struct regulator_init_data *init_data; struct regulator_dev *rdev; @@ -598,7 +597,7 @@ int tps6507x_pmic_probe(struct platform_device *pdev) } tps->desc[i].name = info->name; - tps->desc[i].id = desc_id++; + tps->desc[i].id = i; tps->desc[i].n_voltages = num_voltages[i]; tps->desc[i].ops = (i > TPS6507X_DCDC_3 ? &tps6507x_pmic_ldo_ops : &tps6507x_pmic_dcdc_ops); diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index d461fa7906b8..048ba47e058f 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -604,7 +604,6 @@ static __devinit int tps65910_probe(struct platform_device *pdev) struct regulator_dev *rdev; struct tps65910_reg *pmic; struct tps65910_board *pmic_plat_data; - static int desc_id; int i, err; pmic_plat_data = dev_get_platdata(tps65910->dev); @@ -630,7 +629,7 @@ static __devinit int tps65910_probe(struct platform_device *pdev) pmic->info[i] = info; pmic->desc[i].name = info->name; - pmic->desc[i].id = desc_id++; + pmic->desc[i].id = i; pmic->desc[i].n_voltages = info->table_len; if ((i == TPS65910_REG_VDD1) || (i == TPS65910_REG_VDD2)) -- cgit v1.2.3 From 6be6e96fe90962171f31c099a5e7c28a49a0d0ae Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 13 May 2011 14:54:06 +0800 Subject: regulator: Fix memory leak in max8998_pmic_probe failure path Signed-off-by: Axel Lin Acked-by: Kyungmin Park Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/max8998.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index f57e9c42fdb4..41a1495eec2b 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -732,13 +732,15 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) if (!pdata->buck1_set1) { printk(KERN_ERR "MAX8998 SET1 GPIO defined as 0 !\n"); WARN_ON(!pdata->buck1_set1); - return -EIO; + ret = -EIO; + goto err_free_mem; } /* Check if SET2 is not equal to 0 */ if (!pdata->buck1_set2) { printk(KERN_ERR "MAX8998 SET2 GPIO defined as 0 !\n"); WARN_ON(!pdata->buck1_set2); - return -EIO; + ret = -EIO; + goto err_free_mem; } gpio_request(pdata->buck1_set1, "MAX8998 BUCK1_SET1"); @@ -758,7 +760,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) max8998->buck1_vol[0] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE1, i); if (ret) - return ret; + goto err_free_mem; /* Set predefined value for BUCK1 register 2 */ i = 0; @@ -770,7 +772,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) max8998->buck1_vol[1] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE2, i); if (ret) - return ret; + goto err_free_mem; /* Set predefined value for BUCK1 register 3 */ i = 0; @@ -782,7 +784,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) max8998->buck1_vol[2] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE3, i); if (ret) - return ret; + goto err_free_mem; /* Set predefined value for BUCK1 register 4 */ i = 0; @@ -794,7 +796,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) max8998->buck1_vol[3] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK1_VOLTAGE4, i); if (ret) - return ret; + goto err_free_mem; } @@ -803,7 +805,8 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) if (!pdata->buck2_set3) { printk(KERN_ERR "MAX8998 SET3 GPIO defined as 0 !\n"); WARN_ON(!pdata->buck2_set3); - return -EIO; + ret = -EIO; + goto err_free_mem; } gpio_request(pdata->buck2_set3, "MAX8998 BUCK2_SET3"); gpio_direction_output(pdata->buck2_set3, @@ -818,7 +821,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) max8998->buck2_vol[0] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE1, i); if (ret) - return ret; + goto err_free_mem; /* BUCK2 register 2 */ i = 0; @@ -830,7 +833,7 @@ static __devinit int max8998_pmic_probe(struct platform_device *pdev) max8998->buck2_vol[1] = i; ret = max8998_write_reg(i2c, MAX8998_REG_BUCK2_VOLTAGE2, i); if (ret) - return ret; + goto err_free_mem; } for (i = 0; i < pdata->num_regulators; i++) { @@ -860,6 +863,7 @@ err: if (rdev[i]) regulator_unregister(rdev[i]); +err_free_mem: kfree(max8998->rdev); kfree(max8998); -- cgit v1.2.3 From afdaaafe8e829364d9c1276b5435cc28ee5619df Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Thu, 12 May 2011 11:37:48 +0900 Subject: regulator: max8997: remove useless code fix unreachable code. Signed-off-by: Jonghwan Choi Signed-off-by: MyungJoo Ham Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/max8997.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index 77e0cfb30b23..b1c1444864b3 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -267,7 +267,6 @@ static int max8997_get_enable_register(struct regulator_dev *rdev, default: /* Not controllable or not exists */ return -EINVAL; - break; } return 0; -- cgit v1.2.3 From a4b4148379ef1ad460fc1aa6bcf2cde99cd91166 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 14 May 2011 11:19:45 -0700 Subject: regulator: If we can't configure optimum mode we're always in the best one If either a regulator driver can't tell us what the optimum mode is (or doesn't have modes in the first place) or the system doesn't allow DRMS changes then it's more helpful for users to just say that we're in the optimal mode, even if it's from a selection of one. Still report errors if the process of picking and setting a mode changes as this may indicate that we're stuck in a low power mode and unable to deliver a higher current that the consumer just asked for. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 58452ac0f165..7287000595e5 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -2097,16 +2097,26 @@ int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) mutex_lock(&rdev->mutex); + /* + * first check to see if we can set modes at all, otherwise just + * tell the consumer everything is OK. + */ regulator->uA_load = uA_load; ret = regulator_check_drms(rdev); - if (ret < 0) + if (ret < 0) { + ret = 0; goto out; - ret = -EINVAL; + } - /* sanity check */ if (!rdev->desc->ops->get_optimum_mode) goto out; + /* + * we can actually do this so any errors are indicators of + * potential real failure. + */ + ret = -EINVAL; + /* get output voltage */ output_uV = _regulator_get_voltage(rdev); if (output_uV <= 0) { -- cgit v1.2.3 From 4aa922c024b2a194d7b68b22a66dfcf86e7838b3 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 14 May 2011 13:42:34 -0700 Subject: regulator: Only apply voltage constraints from consumers that set them When applying the set_voltage() requests from consumers skip over those consumers that haven't set anything, otherwise we'll come out with a maximum voltage of zero. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 7287000595e5..9493f6111a38 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -158,6 +158,13 @@ static int regulator_check_consumers(struct regulator_dev *rdev, struct regulator *regulator; list_for_each_entry(regulator, &rdev->consumer_list, list) { + /* + * Assume consumers that didn't say anything are OK + * with anything in the constraint range. + */ + if (!regulator->min_uV && !regulator->max_uV) + continue; + if (*max_uV > regulator->max_uV) *max_uV = regulator->max_uV; if (*min_uV < regulator->min_uV) -- cgit v1.2.3 From 0514e9acd7655c708fbf12a659ea43d835bc688a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 16 May 2011 22:19:01 +0800 Subject: mfd: Fix off-by-one value range checking for tps65910_i2c_write If bytes == (TPS65910_MAX_REGISTER + 1), we have a buffer overflow when doing memcpy(&msg[1], src, bytes). Signed-off-by: Axel Lin Acked-by: Samuel Ortiz Signed-off-by: Liam Girdwood --- drivers/mfd/tps65910.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index bf649cf6a0ae..e31824870b9f 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -71,7 +71,7 @@ static int tps65910_i2c_write(struct tps65910 *tps65910, u8 reg, u8 msg[TPS65910_MAX_REGISTER + 1]; int ret; - if (bytes > (TPS65910_MAX_REGISTER + 1)) + if (bytes > TPS65910_MAX_REGISTER) return -EINVAL; msg[0] = reg; -- cgit v1.2.3 From ecb9c4f5956afa2ca0a20a1f99932b9ff81de854 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 16 May 2011 18:20:34 +0800 Subject: regulator: Remove MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros In current implementation, the original macro implementation assumes the caller pass the parameter starting from 1 (to match the register names in datasheet). Thus we have unneeded plus one then minus one operations when using MAX8997_REG_BUCK1DVS/MAX8997_REG_BUCK2DVS/MAX8997_REG_BUCK5DVS macros. This patch removes these macros to avoid unneeded plus one then minus one operations without reducing readability. Signed-off-by: Axel Lin Acked-by: Kyungmin Park Acked-by: MyungJoo Ham Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/max8997.c | 12 ++++++------ include/linux/mfd/max8997-private.h | 4 ---- 2 files changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index b1c1444864b3..10d5a1d9768e 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -1032,11 +1032,11 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) /* For the safety, set max voltage before setting up */ for (i = 0; i < 8; i++) { - max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS(i + 1), + max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i, max_buck1, 0x3f); - max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS(i + 1), + max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i, max_buck2, 0x3f); - max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS(i + 1), + max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i, max_buck5, 0x3f); } @@ -1113,13 +1113,13 @@ static __devinit int max8997_pmic_probe(struct platform_device *pdev) /* Initialize all the DVS related BUCK registers */ for (i = 0; i < 8; i++) { - max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS(i + 1), + max8997_update_reg(i2c, MAX8997_REG_BUCK1DVS1 + i, max8997->buck1_vol[i], 0x3f); - max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS(i + 1), + max8997_update_reg(i2c, MAX8997_REG_BUCK2DVS1 + i, max8997->buck2_vol[i], 0x3f); - max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS(i + 1), + max8997_update_reg(i2c, MAX8997_REG_BUCK5DVS1 + i, max8997->buck5_vol[i], 0x3f); } diff --git a/include/linux/mfd/max8997-private.h b/include/linux/mfd/max8997-private.h index 69d1010e2e51..5ff2400ad46c 100644 --- a/include/linux/mfd/max8997-private.h +++ b/include/linux/mfd/max8997-private.h @@ -311,10 +311,6 @@ enum max8997_irq { MAX8997_IRQ_NR, }; -#define MAX8997_REG_BUCK1DVS(x) (MAX8997_REG_BUCK1DVS1 + (x) - 1) -#define MAX8997_REG_BUCK2DVS(x) (MAX8997_REG_BUCK2DVS1 + (x) - 1) -#define MAX8997_REG_BUCK5DVS(x) (MAX8997_REG_BUCK5DVS1 + (x) - 1) - #define MAX8997_NUM_GPIO 12 struct max8997_dev { struct device *dev; -- cgit v1.2.3 From 6dc4efc6d5429292f29009f6569fbb9a53929dd6 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 16 May 2011 10:54:27 -0300 Subject: regulator: mc13892: Fix voltage unit in test case. Voltage values should be expressed in microvolts, not in milivolts. Signed-off-by: Fabio Estevam Signed-off-by: Ranjani Vaidyanathan Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/mc13892-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index 33d43b26d53b..3285d41842f2 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -452,9 +452,9 @@ static int mc13892_sw_regulator_set_voltage(struct regulator_dev *rdev, if (ret) goto err; - if (value > 1375) + if (value > 1375000) hi = 1; - else if (value < 1100) + else if (value < 1100000) hi = 0; else hi = valread & MC13892_SWITCHERS0_SWxHI; -- cgit v1.2.3 From 3c24019ddeab71ddf125ad2ad13a38041655c1fd Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 18 May 2011 20:56:45 +0800 Subject: regulator: Fix off-by-one value range checking for mc13xxx_regulator_get_voltage We use val as array index, thus the valid value rangae for val should be 0 .. n_voltages-1. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/mc13xxx-regulator-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c index 2bb5de1f2421..bc27ab136378 100644 --- a/drivers/regulator/mc13xxx-regulator-core.c +++ b/drivers/regulator/mc13xxx-regulator-core.c @@ -174,7 +174,7 @@ static int mc13xxx_regulator_get_voltage(struct regulator_dev *rdev) dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val); - BUG_ON(val > mc13xxx_regulators[id].desc.n_voltages); + BUG_ON(val >= mc13xxx_regulators[id].desc.n_voltages); return mc13xxx_regulators[id].voltages[val]; } -- cgit v1.2.3 From 795570561cc9c8dc7f7582ed6c4d07121b1c4831 Mon Sep 17 00:00:00 2001 From: Jorge Eduardo Candelaria Date: Mon, 16 May 2011 18:34:59 -0500 Subject: MFD: TPS65910: Add support for TPS65911 device The TPS65911 is the next generation of the TPS65910 family of PMIC chips. It adds a few features: - Watchdog Timer - PWM & LED generators - Comparators for system control status It also adds a set of Interrupts and GPIOs, among other things. The driver exports a function to identify between different versions of the tps65910 family, allowing other modules to identify the capabilities of the current chip. Signed-off-by: Jorge Eduardo Candelaria Acked-by: Samuel Ortiz Signed-off-by: Liam Girdwood --- drivers/mfd/tps65910.c | 4 +++- include/linux/mfd/tps65910.h | 46 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index e31824870b9f..2229e66d80db 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -157,6 +157,7 @@ static int tps65910_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, tps65910); tps65910->dev = &i2c->dev; tps65910->i2c_client = i2c; + tps65910->id = id->driver_data; tps65910->read = tps65910_i2c_read; tps65910->write = tps65910_i2c_write; mutex_init(&tps65910->io_mutex); @@ -192,7 +193,8 @@ static int tps65910_i2c_remove(struct i2c_client *i2c) } static const struct i2c_device_id tps65910_i2c_id[] = { - { "tps65910", 0 }, + { "tps65910", TPS65910 }, + { "tps65911", TPS65911 }, { } }; MODULE_DEVICE_TABLE(i2c, tps65910_i2c_id); diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index be08a0c7e7de..6ceea0dab8d7 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -17,6 +17,14 @@ #ifndef __LINUX_MFD_TPS65910_H #define __LINUX_MFD_TPS65910_H +/* TPS chip id list */ +#define TPS65910 0 +#define TPS65911 1 + +/* TPS regulator type list */ +#define REGULATOR_LDO 0 +#define REGULATOR_DCDC 1 + /* * List of registers for component TPS65910 * @@ -96,6 +104,21 @@ #define TPS65910_JTAGVERNUM 0x80 #define TPS65910_MAX_REGISTER 0x80 +/* + * List of registers specific to TPS65911 + */ +#define TPS65911_VDDCTRL 0x27 +#define TPS65911_VDDCTRL_OP 0x28 +#define TPS65911_VDDCTRL_SR 0x29 +#define TPS65911_LDO1 0x30 +#define TPS65911_LDO2 0x31 +#define TPS65911_LDO5 0x32 +#define TPS65911_LDO8 0x33 +#define TPS65911_LDO7 0x34 +#define TPS65911_LDO6 0x35 +#define TPS65911_LDO4 0x36 +#define TPS65911_LDO3 0x37 + /* * List of register bitfields for component TPS65910 * @@ -702,6 +725,23 @@ #define JTAGVERNUM_VERNUM_SHIFT 0 +/* Register VDDCTRL (0x27) bit definitions */ +#define VDDCTRL_ST_MASK 0x03 +#define VDDCTRL_ST_SHIFT 0 + + +/*Register VDDCTRL_OP (0x28) bit definitios */ +#define VDDCTRL_OP_CMD_MASK 0x80 +#define VDDCTRL_OP_CMD_SHIFT 7 +#define VDDCTRL_OP_SEL_MASK 0x7F +#define VDDCTRL_OP_SEL_SHIFT 0 + + +/*Register VDDCTRL_SR (0x29) bit definitions */ +#define VDDCTRL_SR_SEL_MASK 0x7F +#define VDDCTRL_SR_SEL_SHIFT 0 + + /* IRQ Definitions */ #define TPS65910_IRQ_VBAT_VMBDCH 0 #define TPS65910_IRQ_VBAT_VMHI 1 @@ -742,6 +782,7 @@ struct tps65910 { struct device *dev; struct i2c_client *i2c_client; struct mutex io_mutex; + unsigned int id; int (*read)(struct tps65910 *tps65910, u8 reg, int size, void *dest); int (*write)(struct tps65910 *tps65910, u8 reg, int size, void *src); @@ -771,4 +812,9 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base); int tps65910_irq_init(struct tps65910 *tps65910, int irq, struct tps65910_platform_data *pdata); +static inline int tps65910_chip_id(struct tps65910 *tps65910) +{ + return tps65910->id; +} + #endif /* __LINUX_MFD_TPS65910_H */ -- cgit v1.2.3 From a320e3c3d6351814afa5182159df88d2637e0f6f Mon Sep 17 00:00:00 2001 From: Jorge Eduardo Candelaria Date: Mon, 16 May 2011 18:35:03 -0500 Subject: regulator: tps65911: Add new chip version The tps65911 chip introduces new features, including changes in the regulator module. - VDD1 and VDD2 remain unchanged. - VDD3 is now named VDDCTRL and has a wider voltage range. - LDOs are now named LDO1...8 and voltage ranges are sequential, making LDOs easier to handle. Signed-off-by: Jorge Eduardo Candelaria Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/tps65910-regulator.c | 357 +++++++++++++++++++++++++++++---- include/linux/mfd/tps65910.h | 10 +- 2 files changed, 332 insertions(+), 35 deletions(-) diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index 048ba47e058f..55dd4e6650db 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -39,8 +39,17 @@ #define TPS65910_REG_VAUX33 11 #define TPS65910_REG_VMMC 12 -#define TPS65910_NUM_REGULATOR 13 +#define TPS65911_REG_VDDCTRL 4 +#define TPS65911_REG_LDO1 5 +#define TPS65911_REG_LDO2 6 +#define TPS65911_REG_LDO3 7 +#define TPS65911_REG_LDO4 8 +#define TPS65911_REG_LDO5 9 +#define TPS65911_REG_LDO6 10 +#define TPS65911_REG_LDO7 11 +#define TPS65911_REG_LDO8 12 +#define TPS65910_NUM_REGULATOR 13 #define TPS65910_SUPPLY_STATE_ENABLED 0x1 /* supported VIO voltages in milivolts */ @@ -48,7 +57,9 @@ static const u16 VIO_VSEL_table[] = { 1500, 1800, 2500, 3300, }; -/* supported VIO voltages in milivolts */ +/* VSEL tables for TPS65910 specific LDOs and dcdc's */ + +/* supported VDD3 voltages in milivolts */ static const u16 VDD3_VSEL_table[] = { 5000, }; @@ -187,6 +198,71 @@ static struct tps_info tps65910_regs[] = { }, }; +static struct tps_info tps65911_regs[] = { + { + .name = "VIO", + .min_uV = 1500000, + .max_uV = 3300000, + .table_len = ARRAY_SIZE(VIO_VSEL_table), + .table = VIO_VSEL_table, + }, + { + .name = "VDD1", + .min_uV = 600000, + .max_uV = 4500000, + }, + { + .name = "VDD2", + .min_uV = 600000, + .max_uV = 4500000, + }, + { + .name = "VDDCTRL", + .min_uV = 600000, + .max_uV = 1400000, + }, + { + .name = "LDO1", + .min_uV = 1000000, + .max_uV = 3300000, + }, + { + .name = "LDO2", + .min_uV = 1000000, + .max_uV = 3300000, + }, + { + .name = "LDO3", + .min_uV = 1000000, + .max_uV = 3300000, + }, + { + .name = "LDO4", + .min_uV = 1000000, + .max_uV = 3300000, + }, + { + .name = "LDO5", + .min_uV = 1000000, + .max_uV = 3300000, + }, + { + .name = "LDO6", + .min_uV = 1000000, + .max_uV = 3300000, + }, + { + .name = "LDO7", + .min_uV = 1000000, + .max_uV = 3300000, + }, + { + .name = "LDO8", + .min_uV = 1000000, + .max_uV = 3300000, + }, +}; + struct tps65910_reg { struct regulator_desc desc[TPS65910_NUM_REGULATOR]; struct tps65910 *mfd; @@ -194,6 +270,7 @@ struct tps65910_reg { struct tps_info *info[TPS65910_NUM_REGULATOR]; struct mutex mutex; int mode; + int (*get_ctrl_reg)(int); }; static inline int tps65910_read(struct tps65910_reg *pmic, u8 reg) @@ -300,12 +377,46 @@ static int tps65910_get_ctrl_register(int id) } } +static int tps65911_get_ctrl_register(int id) +{ + switch (id) { + case TPS65910_REG_VRTC: + return TPS65910_VRTC; + case TPS65910_REG_VIO: + return TPS65910_VIO; + case TPS65910_REG_VDD1: + return TPS65910_VDD1; + case TPS65910_REG_VDD2: + return TPS65910_VDD2; + case TPS65911_REG_VDDCTRL: + return TPS65911_VDDCTRL; + case TPS65911_REG_LDO1: + return TPS65911_LDO1; + case TPS65911_REG_LDO2: + return TPS65911_LDO2; + case TPS65911_REG_LDO3: + return TPS65911_LDO3; + case TPS65911_REG_LDO4: + return TPS65911_LDO4; + case TPS65911_REG_LDO5: + return TPS65911_LDO5; + case TPS65911_REG_LDO6: + return TPS65911_LDO6; + case TPS65911_REG_LDO7: + return TPS65911_LDO7; + case TPS65911_REG_LDO8: + return TPS65911_LDO8; + default: + return -EINVAL; + } +} + static int tps65910_is_enabled(struct regulator_dev *dev) { struct tps65910_reg *pmic = rdev_get_drvdata(dev); int reg, value, id = rdev_get_id(dev); - reg = tps65910_get_ctrl_register(id); + reg = pmic->get_ctrl_reg(id); if (reg < 0) return reg; @@ -322,7 +433,7 @@ static int tps65910_enable(struct regulator_dev *dev) struct tps65910 *mfd = pmic->mfd; int reg, id = rdev_get_id(dev); - reg = tps65910_get_ctrl_register(id); + reg = pmic->get_ctrl_reg(id); if (reg < 0) return reg; @@ -335,7 +446,7 @@ static int tps65910_disable(struct regulator_dev *dev) struct tps65910 *mfd = pmic->mfd; int reg, id = rdev_get_id(dev); - reg = tps65910_get_ctrl_register(id); + reg = pmic->get_ctrl_reg(id); if (reg < 0) return reg; @@ -348,7 +459,8 @@ static int tps65910_set_mode(struct regulator_dev *dev, unsigned int mode) struct tps65910_reg *pmic = rdev_get_drvdata(dev); struct tps65910 *mfd = pmic->mfd; int reg, value, id = rdev_get_id(dev); - reg = tps65910_get_ctrl_register(id); + + reg = pmic->get_ctrl_reg(id); if (reg < 0) return reg; @@ -371,7 +483,7 @@ static unsigned int tps65910_get_mode(struct regulator_dev *dev) struct tps65910_reg *pmic = rdev_get_drvdata(dev); int reg, value, id = rdev_get_id(dev); - reg = tps65910_get_ctrl_register(id); + reg = pmic->get_ctrl_reg(id); if (reg < 0) return reg; @@ -391,7 +503,7 @@ static int tps65910_get_voltage_dcdc(struct regulator_dev *dev) { struct tps65910_reg *pmic = rdev_get_drvdata(dev); int id = rdev_get_id(dev), voltage = 0; - int opvsel = 0, srvsel = 0, mult = 0, sr = 0; + int opvsel = 0, srvsel = 0, vselmax = 0, mult = 0, sr = 0; switch (id) { case TPS65910_REG_VDD1: @@ -402,6 +514,7 @@ static int tps65910_get_voltage_dcdc(struct regulator_dev *dev) sr = opvsel & VDD1_OP_CMD_MASK; opvsel &= VDD1_OP_SEL_MASK; srvsel &= VDD1_SR_SEL_MASK; + vselmax = 75; break; case TPS65910_REG_VDD2: opvsel = tps65910_reg_read(pmic, TPS65910_VDD2_OP); @@ -411,6 +524,15 @@ static int tps65910_get_voltage_dcdc(struct regulator_dev *dev) sr = opvsel & VDD2_OP_CMD_MASK; opvsel &= VDD2_OP_SEL_MASK; srvsel &= VDD2_SR_SEL_MASK; + vselmax = 75; + break; + case TPS65911_REG_VDDCTRL: + opvsel = tps65910_reg_read(pmic, TPS65911_VDDCTRL_OP); + srvsel = tps65910_reg_read(pmic, TPS65911_VDDCTRL_SR); + sr = opvsel & VDDCTRL_OP_CMD_MASK; + opvsel &= VDDCTRL_OP_SEL_MASK; + srvsel &= VDDCTRL_SR_SEL_MASK; + vselmax = 64; break; } @@ -419,17 +541,21 @@ static int tps65910_get_voltage_dcdc(struct regulator_dev *dev) mult=1; if (sr) { - /* Valid range is 3-75 so normalise */ - if (srvsel < 3) srvsel = 3; - if (srvsel > 75) srvsel = 75; + /* normalise to valid range */ + if (srvsel < 3) + srvsel = 3; + if (srvsel > vselmax) + srvsel = vselmax; srvsel -= 3; voltage = (srvsel * VDD1_2_OFFSET + VDD1_2_MIN_VOLT) * 100; } else { - /* Valid range is 3-75 so normalise */ - if (opvsel < 3) opvsel = 3; - if (opvsel > 75) opvsel = 75; + /* normalise to valid range*/ + if (opvsel < 3) + opvsel = 3; + if (opvsel > vselmax) + opvsel = vselmax; opvsel -= 3; voltage = (opvsel * VDD1_2_OFFSET + VDD1_2_MIN_VOLT) * 100; @@ -445,7 +571,7 @@ static int tps65910_get_voltage(struct regulator_dev *dev) struct tps65910_reg *pmic = rdev_get_drvdata(dev); int reg, value, id = rdev_get_id(dev), voltage = 0; - reg = tps65910_get_ctrl_register(id); + reg = pmic->get_ctrl_reg(id); if (reg < 0) return reg; @@ -480,29 +606,88 @@ static int tps65910_get_voltage_vdd3(struct regulator_dev *dev) return 5 * 1000 * 1000; } +static int tps65911_get_voltage(struct regulator_dev *dev) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + int step_mv, id = rdev_get_id(dev); + u8 value, reg; + + reg = pmic->get_ctrl_reg(id); + + value = tps65910_reg_read(pmic, reg); + + switch (id) { + case TPS65911_REG_LDO1: + case TPS65911_REG_LDO2: + case TPS65911_REG_LDO4: + value &= LDO1_SEL_MASK; + value >>= LDO_SEL_SHIFT; + /* The first 5 values of the selector correspond to 1V */ + if (value < 5) + value = 0; + else + value -= 4; + + step_mv = 50; + break; + case TPS65911_REG_LDO3: + case TPS65911_REG_LDO5: + case TPS65911_REG_LDO6: + case TPS65911_REG_LDO7: + case TPS65911_REG_LDO8: + value &= LDO3_SEL_MASK; + value >>= LDO_SEL_SHIFT; + /* The first 3 values of the selector correspond to 1V */ + if (value < 3) + value = 0; + else + value -= 2; + + step_mv = 100; + break; + case TPS65910_REG_VIO: + return pmic->info[id]->table[value] * 1000; + break; + default: + return -EINVAL; + } + + return (LDO_MIN_VOLT + value * step_mv) * 1000; +} + static int tps65910_set_voltage_dcdc(struct regulator_dev *dev, unsigned selector) { struct tps65910_reg *pmic = rdev_get_drvdata(dev); int id = rdev_get_id(dev), vsel; - int dcdc_mult; + int dcdc_mult = 0; - /* Split vsel into appropriate registers */ - dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; - if (dcdc_mult == 1) dcdc_mult--; - - vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + switch (id) { + case TPS65910_REG_VDD1: + dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + if (dcdc_mult == 1) + dcdc_mult--; + vsel = (selector % VDD1_2_NUM_VOLTS) + 3; - if (id == TPS65910_REG_VDD1) { tps65910_modify_bits(pmic, TPS65910_VDD1, (dcdc_mult << VDD1_VGAIN_SEL_SHIFT), VDD1_VGAIN_SEL_MASK); tps65910_reg_write(pmic, TPS65910_VDD1_OP, vsel); - } else { + break; + case TPS65910_REG_VDD2: + dcdc_mult = (selector / VDD1_2_NUM_VOLTS) + 1; + if (dcdc_mult == 1) + dcdc_mult--; + vsel = (selector % VDD1_2_NUM_VOLTS) + 3; + tps65910_modify_bits(pmic, TPS65910_VDD2, (dcdc_mult << VDD2_VGAIN_SEL_SHIFT), VDD1_VGAIN_SEL_MASK); tps65910_reg_write(pmic, TPS65910_VDD2_OP, vsel); + break; + case TPS65911_REG_VDDCTRL: + vsel = selector; + tps65910_reg_write(pmic, TPS65911_VDDCTRL_OP, vsel); } return 0; @@ -513,7 +698,7 @@ static int tps65910_set_voltage(struct regulator_dev *dev, unsigned selector) struct tps65910_reg *pmic = rdev_get_drvdata(dev); int reg, id = rdev_get_id(dev); - reg = tps65910_get_ctrl_register(id); + reg = pmic->get_ctrl_reg(id); if (reg < 0) return reg; @@ -534,14 +719,49 @@ static int tps65910_set_voltage(struct regulator_dev *dev, unsigned selector) return -EINVAL; } +static int tps65911_set_voltage(struct regulator_dev *dev, unsigned selector) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + int reg, id = rdev_get_id(dev); + + reg = pmic->get_ctrl_reg(id); + if (reg < 0) + return reg; + + switch (id) { + case TPS65911_REG_LDO1: + case TPS65911_REG_LDO2: + case TPS65911_REG_LDO4: + return tps65910_modify_bits(pmic, reg, + (selector << LDO_SEL_SHIFT), LDO1_SEL_MASK); + case TPS65911_REG_LDO3: + case TPS65911_REG_LDO5: + case TPS65911_REG_LDO6: + case TPS65911_REG_LDO7: + case TPS65911_REG_LDO8: + case TPS65910_REG_VIO: + return tps65910_modify_bits(pmic, reg, + (selector << LDO_SEL_SHIFT), LDO3_SEL_MASK); + } + + return -EINVAL; +} + + static int tps65910_list_voltage_dcdc(struct regulator_dev *dev, unsigned selector) { - int mult, volt; - - mult = (selector / VDD1_2_NUM_VOLTS) + 1; + int volt, mult = 1, id = rdev_get_id(dev); - volt = VDD1_2_MIN_VOLT + (selector % VDD1_2_NUM_VOLTS) * VDD1_2_OFFSET; + switch (id) { + case TPS65910_REG_VDD1: + case TPS65910_REG_VDD2: + mult = (selector / VDD1_2_NUM_VOLTS) + 1; + volt = VDD1_2_MIN_VOLT + + (selector % VDD1_2_NUM_VOLTS) * VDD1_2_OFFSET; + case TPS65911_REG_VDDCTRL: + volt = VDDCTRL_MIN_VOLT + (selector * VDDCTRL_OFFSET); + } return volt * 100 * mult; } @@ -563,6 +783,45 @@ static int tps65910_list_voltage(struct regulator_dev *dev, return voltage; } +static int tps65911_list_voltage(struct regulator_dev *dev, unsigned selector) +{ + struct tps65910_reg *pmic = rdev_get_drvdata(dev); + int step_mv = 0, id = rdev_get_id(dev); + + switch(id) { + case TPS65911_REG_LDO1: + case TPS65911_REG_LDO2: + case TPS65911_REG_LDO4: + /* The first 5 values of the selector correspond to 1V */ + if (selector < 5) + selector = 0; + else + selector -= 4; + + step_mv = 50; + break; + case TPS65911_REG_LDO3: + case TPS65911_REG_LDO5: + case TPS65911_REG_LDO6: + case TPS65911_REG_LDO7: + case TPS65911_REG_LDO8: + /* The first 3 values of the selector correspond to 1V */ + if (selector < 3) + selector = 0; + else + selector -= 2; + + step_mv = 100; + break; + case TPS65910_REG_VIO: + return pmic->info[id]->table[selector] * 1000; + default: + return -EINVAL; + } + + return (LDO_MIN_VOLT + selector * step_mv) * 1000; +} + /* Regulator ops (except VRTC) */ static struct regulator_ops tps65910_ops_dcdc = { .is_enabled = tps65910_is_enabled, @@ -596,10 +855,21 @@ static struct regulator_ops tps65910_ops = { .list_voltage = tps65910_list_voltage, }; +static struct regulator_ops tps65911_ops = { + .is_enabled = tps65910_is_enabled, + .enable = tps65910_enable, + .disable = tps65910_disable, + .set_mode = tps65910_set_mode, + .get_mode = tps65910_get_mode, + .get_voltage = tps65911_get_voltage, + .set_voltage_sel = tps65911_set_voltage, + .list_voltage = tps65911_list_voltage, +}; + static __devinit int tps65910_probe(struct platform_device *pdev) { struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent); - struct tps_info *info = tps65910_regs; + struct tps_info *info; struct regulator_init_data *reg_data; struct regulator_dev *rdev; struct tps65910_reg *pmic; @@ -624,6 +894,18 @@ static __devinit int tps65910_probe(struct platform_device *pdev) tps65910_set_bits(pmic->mfd, TPS65910_DEVCTRL, DEVCTRL_SR_CTL_I2C_SEL_MASK); + switch(tps65910_chip_id(tps65910)) { + case TPS65910: + pmic->get_ctrl_reg = &tps65910_get_ctrl_register; + info = tps65910_regs; + case TPS65911: + pmic->get_ctrl_reg = &tps65911_get_ctrl_register; + info = tps65911_regs; + default: + pr_err("Invalid tps chip version\n"); + return -ENODEV; + } + for (i = 0; i < TPS65910_NUM_REGULATOR; i++, info++, reg_data++) { /* Register the regulators */ pmic->info[i] = info; @@ -632,12 +914,19 @@ static __devinit int tps65910_probe(struct platform_device *pdev) pmic->desc[i].id = i; pmic->desc[i].n_voltages = info->table_len; - if ((i == TPS65910_REG_VDD1) || (i == TPS65910_REG_VDD2)) + if (i == TPS65910_REG_VDD1 || i == TPS65910_REG_VDD2) { pmic->desc[i].ops = &tps65910_ops_dcdc; - else if (i == TPS65910_REG_VDD3) - pmic->desc[i].ops = &tps65910_ops_vdd3; - else - pmic->desc[i].ops = &tps65910_ops; + } else if (i == TPS65910_REG_VDD3) { + if (tps65910_chip_id(tps65910) == TPS65910) + pmic->desc[i].ops = &tps65910_ops_vdd3; + else + pmic->desc[i].ops = &tps65910_ops_dcdc; + } else { + if (tps65910_chip_id(tps65910) == TPS65910) + pmic->desc[i].ops = &tps65910_ops; + else + pmic->desc[i].ops = &tps65911_ops; + } pmic->desc[i].type = REGULATOR_VOLTAGE; pmic->desc[i].owner = THIS_MODULE; diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 6ceea0dab8d7..20359e669ae7 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -232,7 +232,6 @@ #define VDD2_OP_SEL_MASK 0x7F #define VDD2_OP_SEL_SHIFT 0 - /*Register VDD2_SR (0x80) register.RegisterDescription */ #define VDD2_SR_SEL_MASK 0x7F #define VDD2_SR_SEL_SHIFT 0 @@ -249,6 +248,8 @@ #define VDD3_CKINEN_SHIFT 2 #define VDD3_ST_MASK 0x03 #define VDD3_ST_SHIFT 0 +#define VDDCTRL_MIN_VOLT 6000 +#define VDDCTRL_OFFSET 125 /*Registers VDIG (0x80) to VDAC register.RegisterDescription */ #define LDO_SEL_MASK 0x0C @@ -259,6 +260,13 @@ #define LDO_ST_MODE_BIT 0x02 +/* Registers LDO1 to LDO8 in tps65910 */ +#define LDO1_SEL_MASK 0xFC +#define LDO3_SEL_MASK 0x7C +#define LDO_MIN_VOLT 1000 +#define LDO_MAX_VOLT 3300; + + /*Register VDIG1 (0x80) register.RegisterDescription */ #define VDIG1_SEL_MASK 0x0C #define VDIG1_SEL_SHIFT 2 -- cgit v1.2.3 From a2974732ca7614aaf0baf9d6dd3ad893d50ce1c5 Mon Sep 17 00:00:00 2001 From: Jorge Eduardo Candelaria Date: Mon, 16 May 2011 18:35:07 -0500 Subject: TPS65911: Add new irq definitions TPS65911 adds new interrupt sources, as well as two new registers to handle them, one for interrupt status and one for interrupt masking. The added irqs are: -VMBCH2 - Low and High threshold -GPIO1-8 - Rising and falling edge detection -WTCHDG - Watchdog interrupt -PWRDN - PWRDN reset interrupt The code should handle these new registers only when the chip version is TPS65911. Signed-off-by: Jorge Eduardo Candelaria Acked-by: Samuel Ortiz Signed-off-by: Liam Girdwood --- drivers/mfd/tps65910-irq.c | 57 ++++++++++++++++++++++++++++++++++---------- include/linux/mfd/tps65910.h | 32 ++++++++++++++++++++++++- 2 files changed, 75 insertions(+), 14 deletions(-) diff --git a/drivers/mfd/tps65910-irq.c b/drivers/mfd/tps65910-irq.c index b8435e045f81..2bfad5c86cc7 100644 --- a/drivers/mfd/tps65910-irq.c +++ b/drivers/mfd/tps65910-irq.c @@ -41,8 +41,8 @@ static inline int irq_to_tps65910_irq(struct tps65910 *tps65910, static irqreturn_t tps65910_irq(int irq, void *irq_data) { struct tps65910 *tps65910 = irq_data; - u16 irq_sts; - u16 irq_mask; + u32 irq_sts; + u32 irq_mask; u8 reg; int i; @@ -50,18 +50,28 @@ static irqreturn_t tps65910_irq(int irq, void *irq_data) irq_sts = reg; tps65910->read(tps65910, TPS65910_INT_STS2, 1, ®); irq_sts |= reg << 8; + switch (tps65910_chip_id(tps65910)) { + case TPS65911: + tps65910->read(tps65910, TPS65910_INT_STS3, 1, ®); + irq_sts |= reg << 16; + } tps65910->read(tps65910, TPS65910_INT_MSK, 1, ®); irq_mask = reg; tps65910->read(tps65910, TPS65910_INT_MSK2, 1, ®); irq_mask |= reg << 8; + switch (tps65910_chip_id(tps65910)) { + case TPS65911: + tps65910->read(tps65910, TPS65910_INT_MSK3, 1, ®); + irq_mask |= reg << 16; + } irq_sts &= ~irq_mask; if (!irq_sts) return IRQ_NONE; - for (i = 0; i < TPS65910_NUM_IRQ; i++) { + for (i = 0; i < tps65910->irq_num; i++) { if (!(irq_sts & (1 << i))) continue; @@ -71,9 +81,15 @@ static irqreturn_t tps65910_irq(int irq, void *irq_data) /* Write the STS register back to clear IRQs we handled */ reg = irq_sts & 0xFF; + irq_sts >>= 8; tps65910->write(tps65910, TPS65910_INT_STS, 1, ®); - reg = irq_sts >> 8; + reg = irq_sts & 0xFF; tps65910->write(tps65910, TPS65910_INT_STS2, 1, ®); + switch (tps65910_chip_id(tps65910)) { + case TPS65911: + reg = irq_sts >> 8; + tps65910->write(tps65910, TPS65910_INT_STS3, 1, ®); + } return IRQ_HANDLED; } @@ -88,19 +104,29 @@ static void tps65910_irq_lock(struct irq_data *data) static void tps65910_irq_sync_unlock(struct irq_data *data) { struct tps65910 *tps65910 = irq_data_get_irq_chip_data(data); - u16 reg_mask; + u32 reg_mask; u8 reg; tps65910->read(tps65910, TPS65910_INT_MSK, 1, ®); reg_mask = reg; tps65910->read(tps65910, TPS65910_INT_MSK2, 1, ®); reg_mask |= reg << 8; + switch (tps65910_chip_id(tps65910)) { + case TPS65911: + tps65910->read(tps65910, TPS65910_INT_MSK3, 1, ®); + reg_mask |= reg << 16; + } if (tps65910->irq_mask != reg_mask) { reg = tps65910->irq_mask & 0xFF; tps65910->write(tps65910, TPS65910_INT_MSK, 1, ®); - reg = tps65910->irq_mask >> 8; + reg = tps65910->irq_mask >> 8 & 0xFF; tps65910->write(tps65910, TPS65910_INT_MSK2, 1, ®); + switch (tps65910_chip_id(tps65910)) { + case TPS65911: + reg = tps65910->irq_mask >> 16; + tps65910->write(tps65910, TPS65910_INT_MSK3, 1, ®); + } } mutex_unlock(&tps65910->irq_lock); } @@ -132,7 +158,6 @@ int tps65910_irq_init(struct tps65910 *tps65910, int irq, { int ret, cur_irq; int flags = IRQF_ONESHOT; - u8 reg; if (!irq) { dev_warn(tps65910->dev, "No interrupt support, no core IRQ\n"); @@ -144,19 +169,22 @@ int tps65910_irq_init(struct tps65910 *tps65910, int irq, return -EINVAL; } - /* Mask top level interrupts */ - reg = 0xFF; - tps65910->write(tps65910, TPS65910_INT_MSK, 1, ®); - reg = 0x03; - tps65910->write(tps65910, TPS65910_INT_MSK2, 1, ®); + tps65910->irq_mask = 0xFFFFFF; mutex_init(&tps65910->irq_lock); tps65910->chip_irq = irq; tps65910->irq_base = pdata->irq_base; + switch (tps65910_chip_id(tps65910)) { + case TPS65910: + tps65910->irq_num = TPS65910_NUM_IRQ; + case TPS65911: + tps65910->irq_num = TPS65911_NUM_IRQ; + } + /* Register with genirq */ for (cur_irq = tps65910->irq_base; - cur_irq < TPS65910_NUM_IRQ + tps65910->irq_base; + cur_irq < tps65910->irq_num + tps65910->irq_base; cur_irq++) { irq_set_chip_data(cur_irq, tps65910); irq_set_chip_and_handler(cur_irq, &tps65910_irq_chip, @@ -174,6 +202,9 @@ int tps65910_irq_init(struct tps65910 *tps65910, int irq, ret = request_threaded_irq(irq, NULL, tps65910_irq, flags, "tps65910", tps65910); + + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); + if (ret != 0) dev_err(tps65910->dev, "Failed to request IRQ: %d\n", ret); diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 20359e669ae7..32bb7b81f713 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -763,6 +763,35 @@ #define TPS65910_IRQ_GPIO_F 9 #define TPS65910_NUM_IRQ 10 +#define TPS65911_IRQ_VBAT_VMBDCH 0 +#define TPS65911_IRQ_VBAT_VMBDCH2L 1 +#define TPS65911_IRQ_VBAT_VMBDCH2H 2 +#define TPS65911_IRQ_VBAT_VMHI 3 +#define TPS65911_IRQ_PWRON 4 +#define TPS65911_IRQ_PWRON_LP 5 +#define TPS65911_IRQ_PWRHOLD_F 6 +#define TPS65911_IRQ_PWRHOLD_R 7 +#define TPS65911_IRQ_HOTDIE 8 +#define TPS65911_IRQ_RTC_ALARM 9 +#define TPS65911_IRQ_RTC_PERIOD 10 +#define TPS65911_IRQ_GPIO0_R 11 +#define TPS65911_IRQ_GPIO0_F 12 +#define TPS65911_IRQ_GPIO1_R 13 +#define TPS65911_IRQ_GPIO1_F 14 +#define TPS65911_IRQ_GPIO2_R 15 +#define TPS65911_IRQ_GPIO2_F 16 +#define TPS65911_IRQ_GPIO3_R 17 +#define TPS65911_IRQ_GPIO3_F 18 +#define TPS65911_IRQ_GPIO4_R 19 +#define TPS65911_IRQ_GPIO4_F 20 +#define TPS65911_IRQ_GPIO5_R 21 +#define TPS65911_IRQ_GPIO5_F 22 +#define TPS65911_IRQ_WTCHDG 23 +#define TPS65911_IRQ_PWRDN 24 + +#define TPS65911_NUM_IRQ 25 + + /* GPIO Register Definitions */ #define TPS65910_GPIO_DEB BIT(2) #define TPS65910_GPIO_PUEN BIT(3) @@ -806,7 +835,8 @@ struct tps65910 { struct mutex irq_lock; int chip_irq; int irq_base; - u16 irq_mask; + int irq_num; + u32 irq_mask; }; struct tps65910_platform_data { -- cgit v1.2.3 From 83545d836cf12a6381b530c5c7aeacf057f86aa9 Mon Sep 17 00:00:00 2001 From: Jorge Eduardo Candelaria Date: Mon, 16 May 2011 18:35:37 -0500 Subject: GPIO: TPS65910: Move driver to drivers/gpio/ The GPIO driver should reside in drivers/gpio/ for better organization. Signed-off-by: Jorge Eduardo Candelaria Acked-by: Grant Likely Signed-off-by: Liam Girdwood --- drivers/gpio/Kconfig | 7 ++++ drivers/gpio/Makefile | 1 + drivers/gpio/tps65910-gpio.c | 91 ++++++++++++++++++++++++++++++++++++++++++++ drivers/mfd/Kconfig | 3 +- drivers/mfd/Makefile | 2 +- drivers/mfd/tps65910-gpio.c | 91 -------------------------------------------- 6 files changed, 102 insertions(+), 93 deletions(-) create mode 100644 drivers/gpio/tps65910-gpio.c delete mode 100644 drivers/mfd/tps65910-gpio.c diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index b57ec09af891..d21364603755 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -424,4 +424,11 @@ config AB8500_GPIO depends on AB8500_CORE && BROKEN help Select this to enable the AB8500 IC GPIO driver + +config GPIO_TPS65910 + bool "TPS65910 GPIO" + depends on MFD_TPS65910 + help + Select this option to enable GPIO driver for the TPS65910 + chip family. endif diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index d92ce3a62ae5..6a3387acc0e5 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -40,3 +40,4 @@ obj-$(CONFIG_GPIO_SX150X) += sx150x.o obj-$(CONFIG_GPIO_VX855) += vx855_gpio.o obj-$(CONFIG_GPIO_ML_IOH) += ml_ioh_gpio.o obj-$(CONFIG_AB8500_GPIO) += ab8500-gpio.o +obj-$(CONFIG_GPIO_TPS65910) += tps65910-gpio.o diff --git a/drivers/gpio/tps65910-gpio.c b/drivers/gpio/tps65910-gpio.c new file mode 100644 index 000000000000..f3ae37652446 --- /dev/null +++ b/drivers/gpio/tps65910-gpio.c @@ -0,0 +1,91 @@ +/* + * tps65910-gpio.c -- TI TPS6591x + * + * Copyright 2010 Texas Instruments Inc. + * + * Author: Graeme Gregory + * Author: Jorge Eduardo Candelaria jedu@slimlogic.co.uk> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include + +static int tps65910_gpio_get(struct gpio_chip *gc, unsigned offset) +{ + struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); + uint8_t val; + + tps65910->read(tps65910, TPS65910_GPIO0, 1, &val); + + if (val & GPIO0_GPIO_STS_MASK) + return 1; + + return 0; +} + +static void tps65910_gpio_set(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); + + if (value) + tps65910_set_bits(tps65910, TPS65910_GPIO0, + GPIO0_GPIO_SET_MASK); + else + tps65910_clear_bits(tps65910, TPS65910_GPIO0, + GPIO0_GPIO_SET_MASK); +} + +static int tps65910_gpio_output(struct gpio_chip *gc, unsigned offset, + int value) +{ + struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); + + /* Set the initial value */ + tps65910_gpio_set(gc, 0, value); + + return tps65910_set_bits(tps65910, TPS65910_GPIO0, GPIO0_GPIO_CFG_MASK); +} + +static int tps65910_gpio_input(struct gpio_chip *gc, unsigned offset) +{ + struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); + + return tps65910_clear_bits(tps65910, TPS65910_GPIO0, + GPIO0_GPIO_CFG_MASK); +} + +void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) +{ + int ret; + + if (!gpio_base) + return; + + tps65910->gpio.owner = THIS_MODULE; + tps65910->gpio.label = tps65910->i2c_client->name; + tps65910->gpio.dev = tps65910->dev; + tps65910->gpio.base = gpio_base; + tps65910->gpio.ngpio = 1; + tps65910->gpio.can_sleep = 1; + + tps65910->gpio.direction_input = tps65910_gpio_input; + tps65910->gpio.direction_output = tps65910_gpio_output; + tps65910->gpio.set = tps65910_gpio_set; + tps65910->gpio.get = tps65910_gpio_get; + + ret = gpiochip_add(&tps65910->gpio); + + if (ret) + dev_warn(tps65910->dev, "GPIO registration failed: %d\n", ret); +} diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 4990a492a09b..b6c267724e14 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -721,8 +721,9 @@ config MFD_PM8XXX_IRQ config MFD_TPS65910 bool "TPS65910 Power Management chip" - depends on I2C=y && GPIOLIB + depends on I2C=y select MFD_CORE + select GPIO_TPS65910 help if you say yes here you get support for the TPS65910 series of Power Management chips. diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index bdb8eab5668b..efe3cc33ed92 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -93,4 +93,4 @@ obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o -obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-gpio.o tps65910-irq.o +obj-$(CONFIG_MFD_TPS65910) += tps65910.o tps65910-irq.o diff --git a/drivers/mfd/tps65910-gpio.c b/drivers/mfd/tps65910-gpio.c deleted file mode 100644 index f3ae37652446..000000000000 --- a/drivers/mfd/tps65910-gpio.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * tps65910-gpio.c -- TI TPS6591x - * - * Copyright 2010 Texas Instruments Inc. - * - * Author: Graeme Gregory - * Author: Jorge Eduardo Candelaria jedu@slimlogic.co.uk> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include -#include -#include -#include -#include -#include - -static int tps65910_gpio_get(struct gpio_chip *gc, unsigned offset) -{ - struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); - uint8_t val; - - tps65910->read(tps65910, TPS65910_GPIO0, 1, &val); - - if (val & GPIO0_GPIO_STS_MASK) - return 1; - - return 0; -} - -static void tps65910_gpio_set(struct gpio_chip *gc, unsigned offset, - int value) -{ - struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); - - if (value) - tps65910_set_bits(tps65910, TPS65910_GPIO0, - GPIO0_GPIO_SET_MASK); - else - tps65910_clear_bits(tps65910, TPS65910_GPIO0, - GPIO0_GPIO_SET_MASK); -} - -static int tps65910_gpio_output(struct gpio_chip *gc, unsigned offset, - int value) -{ - struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); - - /* Set the initial value */ - tps65910_gpio_set(gc, 0, value); - - return tps65910_set_bits(tps65910, TPS65910_GPIO0, GPIO0_GPIO_CFG_MASK); -} - -static int tps65910_gpio_input(struct gpio_chip *gc, unsigned offset) -{ - struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); - - return tps65910_clear_bits(tps65910, TPS65910_GPIO0, - GPIO0_GPIO_CFG_MASK); -} - -void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) -{ - int ret; - - if (!gpio_base) - return; - - tps65910->gpio.owner = THIS_MODULE; - tps65910->gpio.label = tps65910->i2c_client->name; - tps65910->gpio.dev = tps65910->dev; - tps65910->gpio.base = gpio_base; - tps65910->gpio.ngpio = 1; - tps65910->gpio.can_sleep = 1; - - tps65910->gpio.direction_input = tps65910_gpio_input; - tps65910->gpio.direction_output = tps65910_gpio_output; - tps65910->gpio.set = tps65910_gpio_set; - tps65910->gpio.get = tps65910_gpio_get; - - ret = gpiochip_add(&tps65910->gpio); - - if (ret) - dev_warn(tps65910->dev, "GPIO registration failed: %d\n", ret); -} -- cgit v1.2.3 From 11ad14f86a7847b084d3e3f114180be39b1c7322 Mon Sep 17 00:00:00 2001 From: Jorge Eduardo Candelaria Date: Mon, 16 May 2011 18:35:42 -0500 Subject: TPS65911: Add support for added GPIO lines GPIO 1 to 8 are added for TPS65911 chip version. The gpio driver now handles more than one gpio lines. Subsequent versions of the chip family can add new GPIO lines with minimal driver changes. Signed-off-by: Jorge Eduardo Candelaria Acked-by: Grant Likely Signed-off-by: Liam Girdwood --- drivers/gpio/tps65910-gpio.c | 29 +++++++++----- include/linux/mfd/tps65910.h | 90 +++++++------------------------------------- 2 files changed, 33 insertions(+), 86 deletions(-) diff --git a/drivers/gpio/tps65910-gpio.c b/drivers/gpio/tps65910-gpio.c index f3ae37652446..8d1ddfdd63eb 100644 --- a/drivers/gpio/tps65910-gpio.c +++ b/drivers/gpio/tps65910-gpio.c @@ -25,9 +25,9 @@ static int tps65910_gpio_get(struct gpio_chip *gc, unsigned offset) struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); uint8_t val; - tps65910->read(tps65910, TPS65910_GPIO0, 1, &val); + tps65910->read(tps65910, TPS65910_GPIO0 + offset, 1, &val); - if (val & GPIO0_GPIO_STS_MASK) + if (val & GPIO_STS_MASK) return 1; return 0; @@ -39,11 +39,11 @@ static void tps65910_gpio_set(struct gpio_chip *gc, unsigned offset, struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); if (value) - tps65910_set_bits(tps65910, TPS65910_GPIO0, - GPIO0_GPIO_SET_MASK); + tps65910_set_bits(tps65910, TPS65910_GPIO0 + offset, + GPIO_SET_MASK); else - tps65910_clear_bits(tps65910, TPS65910_GPIO0, - GPIO0_GPIO_SET_MASK); + tps65910_clear_bits(tps65910, TPS65910_GPIO0 + offset, + GPIO_SET_MASK); } static int tps65910_gpio_output(struct gpio_chip *gc, unsigned offset, @@ -54,15 +54,16 @@ static int tps65910_gpio_output(struct gpio_chip *gc, unsigned offset, /* Set the initial value */ tps65910_gpio_set(gc, 0, value); - return tps65910_set_bits(tps65910, TPS65910_GPIO0, GPIO0_GPIO_CFG_MASK); + return tps65910_set_bits(tps65910, TPS65910_GPIO0 + offset, + GPIO_CFG_MASK); } static int tps65910_gpio_input(struct gpio_chip *gc, unsigned offset) { struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio); - return tps65910_clear_bits(tps65910, TPS65910_GPIO0, - GPIO0_GPIO_CFG_MASK); + return tps65910_clear_bits(tps65910, TPS65910_GPIO0 + offset, + GPIO_CFG_MASK); } void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) @@ -76,7 +77,15 @@ void tps65910_gpio_init(struct tps65910 *tps65910, int gpio_base) tps65910->gpio.label = tps65910->i2c_client->name; tps65910->gpio.dev = tps65910->dev; tps65910->gpio.base = gpio_base; - tps65910->gpio.ngpio = 1; + + switch(tps65910_chip_id(tps65910)) { + case TPS65910: + tps65910->gpio.ngpio = 6; + case TPS65911: + tps65910->gpio.ngpio = 9; + default: + return; + } tps65910->gpio.can_sleep = 1; tps65910->gpio.direction_input = tps65910_gpio_input; diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 32bb7b81f713..5f770064e0c5 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -101,6 +101,9 @@ #define TPS65910_GPIO3 0x63 #define TPS65910_GPIO4 0x64 #define TPS65910_GPIO5 0x65 +#define TPS65910_GPIO6 0x66 +#define TPS65910_GPIO7 0x67 +#define TPS65910_GPIO8 0x68 #define TPS65910_JTAGVERNUM 0x80 #define TPS65910_MAX_REGISTER 0x80 @@ -650,82 +653,17 @@ #define INT_MSK3_GPIO4_R_IT_MSK_SHIFT 0 -/*Register GPIO0 (0x80) register.RegisterDescription */ -#define GPIO0_GPIO_DEB_MASK 0x10 -#define GPIO0_GPIO_DEB_SHIFT 4 -#define GPIO0_GPIO_PUEN_MASK 0x08 -#define GPIO0_GPIO_PUEN_SHIFT 3 -#define GPIO0_GPIO_CFG_MASK 0x04 -#define GPIO0_GPIO_CFG_SHIFT 2 -#define GPIO0_GPIO_STS_MASK 0x02 -#define GPIO0_GPIO_STS_SHIFT 1 -#define GPIO0_GPIO_SET_MASK 0x01 -#define GPIO0_GPIO_SET_SHIFT 0 - - -/*Register GPIO1 (0x80) register.RegisterDescription */ -#define GPIO1_GPIO_DEB_MASK 0x10 -#define GPIO1_GPIO_DEB_SHIFT 4 -#define GPIO1_GPIO_PUEN_MASK 0x08 -#define GPIO1_GPIO_PUEN_SHIFT 3 -#define GPIO1_GPIO_CFG_MASK 0x04 -#define GPIO1_GPIO_CFG_SHIFT 2 -#define GPIO1_GPIO_STS_MASK 0x02 -#define GPIO1_GPIO_STS_SHIFT 1 -#define GPIO1_GPIO_SET_MASK 0x01 -#define GPIO1_GPIO_SET_SHIFT 0 - - -/*Register GPIO2 (0x80) register.RegisterDescription */ -#define GPIO2_GPIO_DEB_MASK 0x10 -#define GPIO2_GPIO_DEB_SHIFT 4 -#define GPIO2_GPIO_PUEN_MASK 0x08 -#define GPIO2_GPIO_PUEN_SHIFT 3 -#define GPIO2_GPIO_CFG_MASK 0x04 -#define GPIO2_GPIO_CFG_SHIFT 2 -#define GPIO2_GPIO_STS_MASK 0x02 -#define GPIO2_GPIO_STS_SHIFT 1 -#define GPIO2_GPIO_SET_MASK 0x01 -#define GPIO2_GPIO_SET_SHIFT 0 - - -/*Register GPIO3 (0x80) register.RegisterDescription */ -#define GPIO3_GPIO_DEB_MASK 0x10 -#define GPIO3_GPIO_DEB_SHIFT 4 -#define GPIO3_GPIO_PUEN_MASK 0x08 -#define GPIO3_GPIO_PUEN_SHIFT 3 -#define GPIO3_GPIO_CFG_MASK 0x04 -#define GPIO3_GPIO_CFG_SHIFT 2 -#define GPIO3_GPIO_STS_MASK 0x02 -#define GPIO3_GPIO_STS_SHIFT 1 -#define GPIO3_GPIO_SET_MASK 0x01 -#define GPIO3_GPIO_SET_SHIFT 0 - - -/*Register GPIO4 (0x80) register.RegisterDescription */ -#define GPIO4_GPIO_DEB_MASK 0x10 -#define GPIO4_GPIO_DEB_SHIFT 4 -#define GPIO4_GPIO_PUEN_MASK 0x08 -#define GPIO4_GPIO_PUEN_SHIFT 3 -#define GPIO4_GPIO_CFG_MASK 0x04 -#define GPIO4_GPIO_CFG_SHIFT 2 -#define GPIO4_GPIO_STS_MASK 0x02 -#define GPIO4_GPIO_STS_SHIFT 1 -#define GPIO4_GPIO_SET_MASK 0x01 -#define GPIO4_GPIO_SET_SHIFT 0 - - -/*Register GPIO5 (0x80) register.RegisterDescription */ -#define GPIO5_GPIO_DEB_MASK 0x10 -#define GPIO5_GPIO_DEB_SHIFT 4 -#define GPIO5_GPIO_PUEN_MASK 0x08 -#define GPIO5_GPIO_PUEN_SHIFT 3 -#define GPIO5_GPIO_CFG_MASK 0x04 -#define GPIO5_GPIO_CFG_SHIFT 2 -#define GPIO5_GPIO_STS_MASK 0x02 -#define GPIO5_GPIO_STS_SHIFT 1 -#define GPIO5_GPIO_SET_MASK 0x01 -#define GPIO5_GPIO_SET_SHIFT 0 +/*Register GPIO (0x80) register.RegisterDescription */ +#define GPIO_DEB_MASK 0x10 +#define GPIO_DEB_SHIFT 4 +#define GPIO_PUEN_MASK 0x08 +#define GPIO_PUEN_SHIFT 3 +#define GPIO_CFG_MASK 0x04 +#define GPIO_CFG_SHIFT 2 +#define GPIO_STS_MASK 0x02 +#define GPIO_STS_SHIFT 1 +#define GPIO_SET_MASK 0x01 +#define GPIO_SET_SHIFT 0 /*Register JTAGVERNUM (0x80) register.RegisterDescription */ -- cgit v1.2.3 From 6851ad3ab3461966adfffe8789372fe8256da792 Mon Sep 17 00:00:00 2001 From: Jorge Eduardo Candelaria Date: Mon, 16 May 2011 18:35:48 -0500 Subject: TPS65911: Comparator: Add comparator driver This driver adds functionality to the tps65911 chip driver. Two of the comparators are configurable by software and measures VCCS voltage to detect high or low voltage scenarios. Signed-off-by: Jorge Eduardo Candelaria Acked-by: Samuel Ortiz Signed-off-by: Liam Girdwood --- drivers/mfd/tps65911-comparator.c | 188 ++++++++++++++++++++++++++++++++++++++ include/linux/mfd/tps65910.h | 4 + 2 files changed, 192 insertions(+) create mode 100644 drivers/mfd/tps65911-comparator.c diff --git a/drivers/mfd/tps65911-comparator.c b/drivers/mfd/tps65911-comparator.c new file mode 100644 index 000000000000..3d2dc56a3d40 --- /dev/null +++ b/drivers/mfd/tps65911-comparator.c @@ -0,0 +1,188 @@ +/* + * tps65910.c -- TI TPS6591x + * + * Copyright 2010 Texas Instruments Inc. + * + * Author: Jorge Eduardo Candelaria + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define COMP 0 +#define COMP1 1 +#define COMP2 2 + +/* Comparator 1 voltage selection table in milivolts */ +static const u16 COMP_VSEL_TABLE[] = { + 0, 2500, 2500, 2500, 2500, 2550, 2600, 2650, + 2700, 2750, 2800, 2850, 2900, 2950, 3000, 3050, + 3100, 3150, 3200, 3250, 3300, 3350, 3400, 3450, + 3500, +}; + +struct comparator { + const char *name; + int reg; + int uV_max; + const u16 *vsel_table; +}; + +static struct comparator tps_comparators[] = { + { + .name = "COMP1", + .reg = TPS65911_VMBCH, + .uV_max = 3500, + .vsel_table = COMP_VSEL_TABLE, + }, + { + .name = "COMP2", + .reg = TPS65911_VMBCH2, + .uV_max = 3500, + .vsel_table = COMP_VSEL_TABLE, + }, +}; + +static int comp_threshold_set(struct tps65910 *tps65910, int id, int voltage) +{ + struct comparator tps_comp = tps_comparators[id]; + int curr_voltage = 0; + int ret; + u8 index = 0, val; + + if (id == COMP) + return 0; + + while (curr_voltage < tps_comp.uV_max) { + curr_voltage = tps_comp.vsel_table[index]; + if (curr_voltage >= voltage) + break; + else if (curr_voltage < voltage) + index ++; + } + + if (curr_voltage > tps_comp.uV_max) + return -EINVAL; + + val = index << 1; + ret = tps65910->write(tps65910, tps_comp.reg, 1, &val); + + return ret; +} + +static int comp_threshold_get(struct tps65910 *tps65910, int id) +{ + struct comparator tps_comp = tps_comparators[id]; + int ret; + u8 val; + + if (id == COMP) + return 0; + + ret = tps65910->read(tps65910, tps_comp.reg, 1, &val); + if (ret < 0) + return ret; + + val >>= 1; + return tps_comp.vsel_table[val]; +} + +static ssize_t comp_threshold_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tps65910 *tps65910 = dev_get_drvdata(dev->parent); + struct attribute comp_attr = attr->attr; + int id, uVolt; + + if (!strcmp(comp_attr.name, "comp1_threshold")) + id = COMP1; + else if (!strcmp(comp_attr.name, "comp2_threshold")) + id = COMP2; + else + return -EINVAL; + + uVolt = comp_threshold_get(tps65910, id); + + return sprintf(buf, "%d\n", uVolt); +} + +static DEVICE_ATTR(comp1_threshold, S_IRUGO, comp_threshold_show, NULL); +static DEVICE_ATTR(comp2_threshold, S_IRUGO, comp_threshold_show, NULL); + +static __devinit int tps65911_comparator_probe(struct platform_device *pdev) +{ + struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent); + struct tps65910_platform_data *pdata = dev_get_platdata(tps65910->dev); + int ret; + + ret = comp_threshold_set(tps65910, COMP1, pdata->vmbch_threshold); + if (ret < 0) { + dev_err(&pdev->dev, "cannot set COMP1 threshold\n"); + return ret; + } + + ret = comp_threshold_set(tps65910, COMP2, pdata->vmbch2_threshold); + if (ret < 0) { + dev_err(&pdev->dev, "cannot set COMP2 theshold\n"); + return ret; + } + + /* Create sysfs entry */ + ret = device_create_file(&pdev->dev, &dev_attr_comp1_threshold); + if (ret < 0) + dev_err(&pdev->dev, "failed to add COMP1 sysfs file\n"); + + ret = device_create_file(&pdev->dev, &dev_attr_comp2_threshold); + if (ret < 0) + dev_err(&pdev->dev, "failed to add COMP2 sysfs file\n"); + + return ret; +} + +static __devexit int tps65911_comparator_remove(struct platform_device *pdev) +{ + struct tps65910 *tps65910; + + tps65910 = dev_get_drvdata(pdev->dev.parent); + + return 0; +} + +static struct platform_driver tps65911_comparator_driver = { + .driver = { + .name = "tps65911-comparator", + .owner = THIS_MODULE, + }, + .probe = tps65911_comparator_probe, + .remove = __devexit_p(tps65911_comparator_remove), +}; + +static int __init tps65911_comparator_init(void) +{ + return platform_driver_register(&tps65911_comparator_driver); +} +subsys_initcall(tps65911_comparator_init); + +static void __exit tps65911_comparator_exit(void) +{ + platform_driver_unregister(&tps65911_comparator_driver); +} +module_exit(tps65911_comparator_exit); + +MODULE_AUTHOR("Jorge Eduardo Candelaria "); +MODULE_DESCRIPTION("TPS65911 comparator driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:tps65911-comparator"); diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 5f770064e0c5..8bb85b930c07 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -121,6 +121,8 @@ #define TPS65911_LDO6 0x35 #define TPS65911_LDO4 0x36 #define TPS65911_LDO3 0x37 +#define TPS65911_VMBCH 0x6A +#define TPS65911_VMBCH2 0x6B /* * List of register bitfields for component TPS65910 @@ -746,6 +748,8 @@ struct tps65910_board { int gpio_base; int irq; int irq_base; + int vmbch_threshold; + int vmbch2_threshold; struct regulator_init_data *tps65910_pmic_init_data; }; -- cgit v1.2.3 From f8c2940bcd623b4d185d4ff7ff5678a4508939b3 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Fri, 20 May 2011 19:03:51 +0530 Subject: regulator: twl6030: do not write to _GRP for regulator enable TWL6030: regulator is enabled via VREG_STATE TWL4030: regulator is enabled via VREG_GRP Since there is nothing common, split twlreg_enable similar to other regulator_ops Signed-off-by: Balaji T K Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 39 +++++++++++++++++++++++++-------------- 1 file changed, 25 insertions(+), 14 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 2a808c25f982..abb40c6d9a4d 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -156,7 +156,7 @@ static int twl6030reg_is_enabled(struct regulator_dev *rdev) return grp && (val == TWL6030_CFG_STATE_ON); } -static int twlreg_enable(struct regulator_dev *rdev) +static int twl4030reg_enable(struct regulator_dev *rdev) { struct twlreg_info *info = rdev_get_drvdata(rdev); int grp; @@ -166,17 +166,28 @@ static int twlreg_enable(struct regulator_dev *rdev) if (grp < 0) return grp; - if (twl_class_is_4030()) - grp |= P1_GRP_4030; - else - grp |= P1_GRP_6030; + grp |= P1_GRP_4030; ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); - if (!ret && twl_class_is_6030()) - ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, - grp << TWL6030_CFG_STATE_GRP_SHIFT | - TWL6030_CFG_STATE_ON); + udelay(info->delay); + + return ret; +} + +static int twl6030reg_enable(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int grp; + int ret; + + grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); + if (grp < 0) + return grp; + + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, + grp << TWL6030_CFG_STATE_GRP_SHIFT | + TWL6030_CFG_STATE_ON); udelay(info->delay); @@ -473,7 +484,7 @@ static struct regulator_ops twl4030ldo_ops = { .set_voltage = twl4030ldo_set_voltage, .get_voltage = twl4030ldo_get_voltage, - .enable = twlreg_enable, + .enable = twl4030reg_enable, .disable = twlreg_disable, .is_enabled = twl4030reg_is_enabled, @@ -531,7 +542,7 @@ static struct regulator_ops twl6030ldo_ops = { .set_voltage = twl6030ldo_set_voltage, .get_voltage = twl6030ldo_get_voltage, - .enable = twlreg_enable, + .enable = twl6030reg_enable, .disable = twlreg_disable, .is_enabled = twl6030reg_is_enabled, @@ -564,7 +575,7 @@ static struct regulator_ops twl4030fixed_ops = { .get_voltage = twlfixed_get_voltage, - .enable = twlreg_enable, + .enable = twl4030reg_enable, .disable = twlreg_disable, .is_enabled = twl4030reg_is_enabled, @@ -578,7 +589,7 @@ static struct regulator_ops twl6030fixed_ops = { .get_voltage = twlfixed_get_voltage, - .enable = twlreg_enable, + .enable = twl6030reg_enable, .disable = twlreg_disable, .is_enabled = twl6030reg_is_enabled, @@ -588,7 +599,7 @@ static struct regulator_ops twl6030fixed_ops = { }; static struct regulator_ops twl6030_fixed_resource = { - .enable = twlreg_enable, + .enable = twl6030reg_enable, .disable = twlreg_disable, .is_enabled = twl6030reg_is_enabled, .get_status = twl6030reg_get_status, -- cgit v1.2.3 From 0ff3897d79d4607d37432b3eb81a304f7e4b4841 Mon Sep 17 00:00:00 2001 From: Balaji T K Date: Fri, 20 May 2011 19:03:52 +0530 Subject: regulator: twl6030: do not write to _GRP for regulator disable TWL6030: regulator is disabled via VREG_STATE TWL4030: regulator is disabled via VREG_GRP Since there is nothing common, split twlreg_enable similar to other regulator_ops Signed-off-by: Balaji T K Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 47 ++++++++++++++++++--------------------- 1 file changed, 22 insertions(+), 25 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index abb40c6d9a4d..4702b8a7e0ef 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -194,7 +194,7 @@ static int twl6030reg_enable(struct regulator_dev *rdev) return ret; } -static int twlreg_disable(struct regulator_dev *rdev) +static int twl4030reg_disable(struct regulator_dev *rdev) { struct twlreg_info *info = rdev_get_drvdata(rdev); int grp; @@ -204,28 +204,25 @@ static int twlreg_disable(struct regulator_dev *rdev) if (grp < 0) return grp; - /* For 6030, set the off state for all grps enabled */ - if (twl_class_is_6030()) { - ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, - (grp & (P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030)) << - TWL6030_CFG_STATE_GRP_SHIFT | - TWL6030_CFG_STATE_OFF); - if (ret) - return ret; - } - - if (twl_class_is_4030()) - grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030); - else - grp &= ~(P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030); + grp &= ~(P1_GRP_4030 | P2_GRP_4030 | P3_GRP_4030); ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_GRP, grp); - /* Next, associate cleared grp in state register */ - if (!ret && twl_class_is_6030()) - ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, - grp << TWL6030_CFG_STATE_GRP_SHIFT | - TWL6030_CFG_STATE_OFF); + return ret; +} + +static int twl6030reg_disable(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int grp = 0; + int ret; + + grp = P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030; + + /* For 6030, set the off state for all grps enabled */ + ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, + (grp) << TWL6030_CFG_STATE_GRP_SHIFT | + TWL6030_CFG_STATE_OFF); return ret; } @@ -485,7 +482,7 @@ static struct regulator_ops twl4030ldo_ops = { .get_voltage = twl4030ldo_get_voltage, .enable = twl4030reg_enable, - .disable = twlreg_disable, + .disable = twl4030reg_disable, .is_enabled = twl4030reg_is_enabled, .set_mode = twl4030reg_set_mode, @@ -543,7 +540,7 @@ static struct regulator_ops twl6030ldo_ops = { .get_voltage = twl6030ldo_get_voltage, .enable = twl6030reg_enable, - .disable = twlreg_disable, + .disable = twl6030reg_disable, .is_enabled = twl6030reg_is_enabled, .set_mode = twl6030reg_set_mode, @@ -576,7 +573,7 @@ static struct regulator_ops twl4030fixed_ops = { .get_voltage = twlfixed_get_voltage, .enable = twl4030reg_enable, - .disable = twlreg_disable, + .disable = twl4030reg_disable, .is_enabled = twl4030reg_is_enabled, .set_mode = twl4030reg_set_mode, @@ -590,7 +587,7 @@ static struct regulator_ops twl6030fixed_ops = { .get_voltage = twlfixed_get_voltage, .enable = twl6030reg_enable, - .disable = twlreg_disable, + .disable = twl6030reg_disable, .is_enabled = twl6030reg_is_enabled, .set_mode = twl6030reg_set_mode, @@ -600,7 +597,7 @@ static struct regulator_ops twl6030fixed_ops = { static struct regulator_ops twl6030_fixed_resource = { .enable = twl6030reg_enable, - .disable = twlreg_disable, + .disable = twl6030reg_disable, .is_enabled = twl6030reg_is_enabled, .get_status = twl6030reg_get_status, }; -- cgit v1.2.3 From 4d94aee577ea8179bd40f0f17e64cada25c66b85 Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Sun, 22 May 2011 21:21:23 +0100 Subject: REGULATOR: TWL6025: add support to twl-regulator Adding support for the twl6025. Major difference in the twl6025 is the group functionality has been removed from the chip so this affects how regulators are enabled and disabled. The names of the regulators also changed. The DCDCs of the 6025 are software controllable as well. Since V1 Use the features variable passed via platform data instead of calling global function. Change the very switch like if statements to be a more readable switch statement. Since V2 twl6025 doesn't use remap so remove it from the macros. Since V3 enable/disable functions for 4030/6030 were seperated upstream so rebase on top of this. Change DCDC reference to SMPS as this is used in TRM. Change list_voltage slightly to have less code. Signed-off-by: Graeme Gregory Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/twl-regulator.c | 329 +++++++++++++++++++++++++++++++++++++- 1 file changed, 321 insertions(+), 8 deletions(-) diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c index 4702b8a7e0ef..87fe0f75a56e 100644 --- a/drivers/regulator/twl-regulator.c +++ b/drivers/regulator/twl-regulator.c @@ -51,8 +51,13 @@ struct twlreg_info { u16 min_mV; u16 max_mV; + u8 flags; + /* used by regulator core */ struct regulator_desc desc; + + /* chip specific features */ + unsigned long features; }; @@ -70,6 +75,7 @@ struct twlreg_info { #define VREG_TRANS 1 #define VREG_STATE 2 #define VREG_VOLTAGE 3 +#define VREG_VOLTAGE_SMPS 4 /* TWL6030 Misc register offsets */ #define VREG_BC_ALL 1 #define VREG_BC_REF 2 @@ -87,6 +93,17 @@ struct twlreg_info { #define TWL6030_CFG_STATE_APP(v) (((v) & TWL6030_CFG_STATE_APP_MASK) >>\ TWL6030_CFG_STATE_APP_SHIFT) +/* Flags for SMPS Voltage reading */ +#define SMPS_OFFSET_EN BIT(0) +#define SMPS_EXTENDED_EN BIT(1) + +/* twl6025 SMPS EPROM values */ +#define TWL6030_SMPS_OFFSET 0xB0 +#define TWL6030_SMPS_MULT 0xB3 +#define SMPS_MULTOFFSET_SMPS4 BIT(0) +#define SMPS_MULTOFFSET_VIO BIT(1) +#define SMPS_MULTOFFSET_SMPS3 BIT(6) + static inline int twlreg_read(struct twlreg_info *info, unsigned slave_subgp, unsigned offset) { @@ -142,13 +159,17 @@ static int twl4030reg_is_enabled(struct regulator_dev *rdev) static int twl6030reg_is_enabled(struct regulator_dev *rdev) { struct twlreg_info *info = rdev_get_drvdata(rdev); - int grp, val; + int grp = 0, val; - grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); + if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS))) + grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); if (grp < 0) return grp; - grp &= P1_GRP_6030; + if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS))) + grp &= P1_GRP_6030; + else + grp = 1; val = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_STATE); val = TWL6030_CFG_STATE_APP(val); @@ -178,10 +199,11 @@ static int twl4030reg_enable(struct regulator_dev *rdev) static int twl6030reg_enable(struct regulator_dev *rdev) { struct twlreg_info *info = rdev_get_drvdata(rdev); - int grp; + int grp = 0; int ret; - grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); + if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS))) + grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); if (grp < 0) return grp; @@ -217,7 +239,8 @@ static int twl6030reg_disable(struct regulator_dev *rdev) int grp = 0; int ret; - grp = P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030; + if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS))) + grp = P1_GRP_6030 | P2_GRP_6030 | P3_GRP_6030; /* For 6030, set the off state for all grps enabled */ ret = twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_STATE, @@ -307,10 +330,11 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode) static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode) { struct twlreg_info *info = rdev_get_drvdata(rdev); - int grp; + int grp = 0; int val; - grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); + if (!(twl_class_is_6030() && (info->features & TWL6025_SUBCLASS))) + grp = twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_GRP); if (grp < 0) return grp; @@ -602,6 +626,209 @@ static struct regulator_ops twl6030_fixed_resource = { .get_status = twl6030reg_get_status, }; +/* + * SMPS status and control + */ + +static int twl6030smps_list_voltage(struct regulator_dev *rdev, unsigned index) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + + int voltage = 0; + + switch (info->flags) { + case SMPS_OFFSET_EN: + voltage = 100000; + /* fall through */ + case 0: + switch (index) { + case 0: + voltage = 0; + break; + case 58: + voltage = 1350 * 1000; + break; + case 59: + voltage = 1500 * 1000; + break; + case 60: + voltage = 1800 * 1000; + break; + case 61: + voltage = 1900 * 1000; + break; + case 62: + voltage = 2100 * 1000; + break; + default: + voltage += (600000 + (12500 * (index - 1))); + } + break; + case SMPS_EXTENDED_EN: + switch (index) { + case 0: + voltage = 0; + break; + case 58: + voltage = 2084 * 1000; + break; + case 59: + voltage = 2315 * 1000; + break; + case 60: + voltage = 2778 * 1000; + break; + case 61: + voltage = 2932 * 1000; + break; + case 62: + voltage = 3241 * 1000; + break; + default: + voltage = (1852000 + (38600 * (index - 1))); + } + break; + case SMPS_OFFSET_EN | SMPS_EXTENDED_EN: + switch (index) { + case 0: + voltage = 0; + break; + case 58: + voltage = 4167 * 1000; + break; + case 59: + voltage = 2315 * 1000; + break; + case 60: + voltage = 2778 * 1000; + break; + case 61: + voltage = 2932 * 1000; + break; + case 62: + voltage = 3241 * 1000; + break; + default: + voltage = (2161000 + (38600 * (index - 1))); + } + break; + } + + return voltage; +} + +static int +twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, + unsigned int *selector) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + int vsel = 0; + + switch (info->flags) { + case 0: + if (min_uV == 0) + vsel = 0; + else if ((min_uV >= 600000) && (max_uV <= 1300000)) { + vsel = (min_uV - 600000) / 125; + if (vsel % 100) + vsel += 100; + vsel /= 100; + vsel++; + } + /* Values 1..57 for vsel are linear and can be calculated + * values 58..62 are non linear. + */ + else if ((min_uV > 1900000) && (max_uV >= 2100000)) + vsel = 62; + else if ((min_uV > 1800000) && (max_uV >= 1900000)) + vsel = 61; + else if ((min_uV > 1500000) && (max_uV >= 1800000)) + vsel = 60; + else if ((min_uV > 1350000) && (max_uV >= 1500000)) + vsel = 59; + else if ((min_uV > 1300000) && (max_uV >= 1350000)) + vsel = 58; + else + return -EINVAL; + break; + case SMPS_OFFSET_EN: + if (min_uV == 0) + vsel = 0; + else if ((min_uV >= 700000) && (max_uV <= 1420000)) { + vsel = (min_uV - 700000) / 125; + if (vsel % 100) + vsel += 100; + vsel /= 100; + vsel++; + } + /* Values 1..57 for vsel are linear and can be calculated + * values 58..62 are non linear. + */ + else if ((min_uV > 1900000) && (max_uV >= 2100000)) + vsel = 62; + else if ((min_uV > 1800000) && (max_uV >= 1900000)) + vsel = 61; + else if ((min_uV > 1350000) && (max_uV >= 1800000)) + vsel = 60; + else if ((min_uV > 1350000) && (max_uV >= 1500000)) + vsel = 59; + else if ((min_uV > 1300000) && (max_uV >= 1350000)) + vsel = 58; + else + return -EINVAL; + break; + case SMPS_EXTENDED_EN: + if (min_uV == 0) + vsel = 0; + else if ((min_uV >= 1852000) && (max_uV <= 4013600)) { + vsel = (min_uV - 1852000) / 386; + if (vsel % 100) + vsel += 100; + vsel /= 100; + vsel++; + } + break; + case SMPS_OFFSET_EN|SMPS_EXTENDED_EN: + if (min_uV == 0) + vsel = 0; + else if ((min_uV >= 2161000) && (max_uV <= 4321000)) { + vsel = (min_uV - 1852000) / 386; + if (vsel % 100) + vsel += 100; + vsel /= 100; + vsel++; + } + break; + } + + *selector = vsel; + + return twlreg_write(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS, + vsel); +} + +static int twl6030smps_get_voltage_sel(struct regulator_dev *rdev) +{ + struct twlreg_info *info = rdev_get_drvdata(rdev); + + return twlreg_read(info, TWL_MODULE_PM_RECEIVER, VREG_VOLTAGE_SMPS); +} + +static struct regulator_ops twlsmps_ops = { + .list_voltage = twl6030smps_list_voltage, + + .set_voltage = twl6030smps_set_voltage, + .get_voltage_sel = twl6030smps_get_voltage_sel, + + .enable = twl6030reg_enable, + .disable = twl6030reg_disable, + .is_enabled = twl6030reg_is_enabled, + + .set_mode = twl6030reg_set_mode, + + .get_status = twl6030reg_get_status, +}; + /*----------------------------------------------------------------------*/ #define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \ @@ -644,6 +871,20 @@ static struct regulator_ops twl6030_fixed_resource = { }, \ } +#define TWL6025_ADJUSTABLE_LDO(label, offset, min_mVolts, max_mVolts, num) { \ + .base = offset, \ + .id = num, \ + .min_mV = min_mVolts, \ + .max_mV = max_mVolts, \ + .desc = { \ + .name = #label, \ + .id = TWL6025_REG_##label, \ + .n_voltages = ((max_mVolts - min_mVolts)/100) + 1, \ + .ops = &twl6030ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + }, \ + } #define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \ family, operations) { \ @@ -675,6 +916,21 @@ static struct regulator_ops twl6030_fixed_resource = { }, \ } +#define TWL6025_ADJUSTABLE_SMPS(label, offset, num) { \ + .base = offset, \ + .id = num, \ + .min_mV = 600, \ + .max_mV = 2100, \ + .desc = { \ + .name = #label, \ + .id = TWL6025_REG_##label, \ + .n_voltages = 63, \ + .ops = &twlsmps_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + }, \ + } + /* * We list regulators here if systems need some level of * software control over them after boot. @@ -716,8 +972,41 @@ static struct twlreg_info twl_regs[] = { TWL6030_FIXED_LDO(VDAC, 0x64, 1800, 17, 0), TWL6030_FIXED_LDO(VUSB, 0x70, 3300, 18, 0), TWL6030_FIXED_RESOURCE(CLK32KG, 0x8C, 48, 0), + + /* 6025 are renamed compared to 6030 versions */ + TWL6025_ADJUSTABLE_LDO(LDO2, 0x54, 1000, 3300, 1), + TWL6025_ADJUSTABLE_LDO(LDO4, 0x58, 1000, 3300, 2), + TWL6025_ADJUSTABLE_LDO(LDO3, 0x5c, 1000, 3300, 3), + TWL6025_ADJUSTABLE_LDO(LDO5, 0x68, 1000, 3300, 4), + TWL6025_ADJUSTABLE_LDO(LDO1, 0x6c, 1000, 3300, 5), + TWL6025_ADJUSTABLE_LDO(LDO7, 0x74, 1000, 3300, 7), + TWL6025_ADJUSTABLE_LDO(LDO6, 0x60, 1000, 3300, 16), + TWL6025_ADJUSTABLE_LDO(LDOLN, 0x64, 1000, 3300, 17), + TWL6025_ADJUSTABLE_LDO(LDOUSB, 0x70, 1000, 3300, 18), + + TWL6025_ADJUSTABLE_SMPS(SMPS3, 0x34, 1), + TWL6025_ADJUSTABLE_SMPS(SMPS4, 0x10, 2), + TWL6025_ADJUSTABLE_SMPS(VIO, 0x16, 3), }; +static u8 twl_get_smps_offset(void) +{ + u8 value; + + twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &value, + TWL6030_SMPS_OFFSET); + return value; +} + +static u8 twl_get_smps_mult(void) +{ + u8 value; + + twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &value, + TWL6030_SMPS_MULT); + return value; +} + static int __devinit twlreg_probe(struct platform_device *pdev) { int i; @@ -739,6 +1028,9 @@ static int __devinit twlreg_probe(struct platform_device *pdev) if (!initdata) return -EINVAL; + /* copy the features into regulator data */ + info->features = (unsigned long)initdata->driver_data; + /* Constrain board-specific capabilities according to what * this driver and the chip itself can actually do. */ @@ -761,6 +1053,27 @@ static int __devinit twlreg_probe(struct platform_device *pdev) break; } + switch (pdev->id) { + case TWL6025_REG_SMPS3: + if (twl_get_smps_mult() & SMPS_MULTOFFSET_SMPS3) + info->flags |= SMPS_EXTENDED_EN; + if (twl_get_smps_offset() & SMPS_MULTOFFSET_SMPS3) + info->flags |= SMPS_OFFSET_EN; + break; + case TWL6025_REG_SMPS4: + if (twl_get_smps_mult() & SMPS_MULTOFFSET_SMPS4) + info->flags |= SMPS_EXTENDED_EN; + if (twl_get_smps_offset() & SMPS_MULTOFFSET_SMPS4) + info->flags |= SMPS_OFFSET_EN; + break; + case TWL6025_REG_VIO: + if (twl_get_smps_mult() & SMPS_MULTOFFSET_VIO) + info->flags |= SMPS_EXTENDED_EN; + if (twl_get_smps_offset() & SMPS_MULTOFFSET_VIO) + info->flags |= SMPS_OFFSET_EN; + break; + } + rdev = regulator_register(&info->desc, &pdev->dev, initdata, info); if (IS_ERR(rdev)) { dev_err(&pdev->dev, "can't register %s, %ld\n", -- cgit v1.2.3 From 5ccee4ae8eab957ab6d534283db5bd27703dba03 Mon Sep 17 00:00:00 2001 From: Graeme Gregory Date: Sun, 22 May 2011 21:21:24 +0100 Subject: USB: TWL6025 allow different regulator name The twl6025 uses a different regulator for USB than the 6030 so select the correct regulator name depending on the subclass of device. Since V1 Use features passed via platform data instead of global variable. Signed-off-by: Graeme Gregory Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/usb/otg/twl6030-usb.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/usb/otg/twl6030-usb.c b/drivers/usb/otg/twl6030-usb.c index 3f2e07011a48..cfb5aa72b196 100644 --- a/drivers/usb/otg/twl6030-usb.c +++ b/drivers/usb/otg/twl6030-usb.c @@ -100,6 +100,7 @@ struct twl6030_usb { u8 linkstat; u8 asleep; bool irq_enabled; + unsigned long features; }; #define xceiv_to_twl(x) container_of((x), struct twl6030_usb, otg) @@ -204,6 +205,12 @@ static int twl6030_start_srp(struct otg_transceiver *x) static int twl6030_usb_ldo_init(struct twl6030_usb *twl) { + char *regulator_name; + + if (twl->features & TWL6025_SUBCLASS) + regulator_name = "ldousb"; + else + regulator_name = "vusb"; /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); @@ -214,7 +221,7 @@ static int twl6030_usb_ldo_init(struct twl6030_usb *twl) /* Program MISC2 register and set bit VUSB_IN_VBAT */ twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); - twl->usb3v3 = regulator_get(twl->dev, "vusb"); + twl->usb3v3 = regulator_get(twl->dev, regulator_name); if (IS_ERR(twl->usb3v3)) return -ENODEV; @@ -409,6 +416,7 @@ static int __devinit twl6030_usb_probe(struct platform_device *pdev) twl->dev = &pdev->dev; twl->irq1 = platform_get_irq(pdev, 0); twl->irq2 = platform_get_irq(pdev, 1); + twl->features = pdata->features; twl->otg.dev = twl->dev; twl->otg.label = "twl6030"; twl->otg.set_host = twl6030_set_host; -- cgit v1.2.3 From cb220d16f91f8d5fa1450c7af17e028e8cb3f0f1 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 23 May 2011 20:08:10 +0800 Subject: regulator: Fix _regulator_get_voltage if get_voltage callback is NULL In the case of get_voltage callback is NULL, current implementation in _regulator_get_voltage will return -EINVAL. Also returns proper error if ret is negative value. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/core.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 9493f6111a38..d3e38790906e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1886,12 +1886,14 @@ static int _regulator_get_voltage(struct regulator_dev *rdev) if (sel < 0) return sel; ret = rdev->desc->ops->list_voltage(rdev, sel); - } - if (rdev->desc->ops->get_voltage) + } else if (rdev->desc->ops->get_voltage) { ret = rdev->desc->ops->get_voltage(rdev); - else + } else { return -EINVAL; + } + if (ret < 0) + return ret; return ret - rdev->constraints->uV_offset; } -- cgit v1.2.3 From 287548e46aa752ce9bb87fcff46f8aa794cc5037 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 27 May 2011 06:50:06 -0400 Subject: split __follow_mount_rcu() into normal and .. cases Signed-off-by: Al Viro --- fs/namei.c | 35 ++++++++++++++++++++++++++--------- 1 file changed, 26 insertions(+), 9 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 2358b326b221..da9c26578663 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -919,12 +919,11 @@ static inline bool managed_dentry_might_block(struct dentry *dentry) } /* - * Skip to top of mountpoint pile in rcuwalk mode. We abort the rcu-walk if we - * meet a managed dentry and we're not walking to "..". True is returned to - * continue, false to abort. + * Try to skip to top of mountpoint pile in rcuwalk mode. Fail if + * we meet a managed dentry that would need blocking. */ static bool __follow_mount_rcu(struct nameidata *nd, struct path *path, - struct inode **inode, bool reverse_transit) + struct inode **inode) { for (;;) { struct vfsmount *mounted; @@ -933,8 +932,7 @@ static bool __follow_mount_rcu(struct nameidata *nd, struct path *path, * that wants to block transit. */ *inode = path->dentry->d_inode; - if (!reverse_transit && - unlikely(managed_dentry_might_block(path->dentry))) + if (unlikely(managed_dentry_might_block(path->dentry))) return false; if (!d_mountpoint(path->dentry)) @@ -949,10 +947,29 @@ static bool __follow_mount_rcu(struct nameidata *nd, struct path *path, } if (unlikely(path->dentry->d_flags & DCACHE_NEED_AUTOMOUNT)) - return reverse_transit; + return false; return true; } +static void follow_mount_rcu(struct nameidata *nd, struct path *path, + struct inode **inode) +{ + for (;;) { + struct vfsmount *mounted; + *inode = path->dentry->d_inode; + + if (!d_mountpoint(path->dentry)) + break; + + mounted = __lookup_mnt(path->mnt, path->dentry, 1); + if (!mounted) + break; + path->mnt = mounted; + path->dentry = mounted->mnt_root; + nd->seq = read_seqcount_begin(&path->dentry->d_seq); + } +} + static int follow_dotdot_rcu(struct nameidata *nd) { struct inode *inode = nd->inode; @@ -982,7 +999,7 @@ static int follow_dotdot_rcu(struct nameidata *nd) nd->seq = read_seqcount_begin(&nd->path.dentry->d_seq); inode = nd->path.dentry->d_inode; } - __follow_mount_rcu(nd, &nd->path, &inode, true); + follow_mount_rcu(nd, &nd->path, &inode); nd->inode = inode; return 0; @@ -1157,7 +1174,7 @@ static int do_lookup(struct nameidata *nd, struct qstr *name, } path->mnt = mnt; path->dentry = dentry; - if (likely(__follow_mount_rcu(nd, path, inode, false))) + if (likely(__follow_mount_rcu(nd, path, inode))) return 0; unlazy: if (unlazy_walk(nd, dentry)) -- cgit v1.2.3 From dea3937619cb67d2ad08e2d29ae923875b1eeee9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 27 May 2011 06:53:39 -0400 Subject: Trim excessive arguments of follow_mount_rcu() ... and kill a useless local variable in follow_dotdot_rcu(), while we are at it - follow_mount_rcu(nd, path, inode) *always* assigned value to *inode, and always it had been path->dentry->d_inode (aka nd->path.dentry->d_inode, since it always got &nd->path as the second argument). Signed-off-by: Al Viro --- fs/namei.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index da9c26578663..988081424098 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -951,29 +951,21 @@ static bool __follow_mount_rcu(struct nameidata *nd, struct path *path, return true; } -static void follow_mount_rcu(struct nameidata *nd, struct path *path, - struct inode **inode) +static void follow_mount_rcu(struct nameidata *nd) { - for (;;) { + while (d_mountpoint(nd->path.dentry)) { struct vfsmount *mounted; - *inode = path->dentry->d_inode; - - if (!d_mountpoint(path->dentry)) - break; - - mounted = __lookup_mnt(path->mnt, path->dentry, 1); + mounted = __lookup_mnt(nd->path.mnt, nd->path.dentry, 1); if (!mounted) break; - path->mnt = mounted; - path->dentry = mounted->mnt_root; - nd->seq = read_seqcount_begin(&path->dentry->d_seq); + nd->path.mnt = mounted; + nd->path.dentry = mounted->mnt_root; + nd->seq = read_seqcount_begin(&nd->path.dentry->d_seq); } } static int follow_dotdot_rcu(struct nameidata *nd) { - struct inode *inode = nd->inode; - set_root_rcu(nd); while (1) { @@ -989,7 +981,6 @@ static int follow_dotdot_rcu(struct nameidata *nd) seq = read_seqcount_begin(&parent->d_seq); if (read_seqcount_retry(&old->d_seq, nd->seq)) goto failed; - inode = parent->d_inode; nd->path.dentry = parent; nd->seq = seq; break; @@ -997,10 +988,9 @@ static int follow_dotdot_rcu(struct nameidata *nd) if (!follow_up_rcu(&nd->path)) break; nd->seq = read_seqcount_begin(&nd->path.dentry->d_seq); - inode = nd->path.dentry->d_inode; } - follow_mount_rcu(nd, &nd->path, &inode); - nd->inode = inode; + follow_mount_rcu(nd); + nd->inode = nd->path.dentry->d_inode; return 0; failed: -- cgit v1.2.3 From d6e9bd256c88ce5f4b668249e363a74f51393daa Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 27 May 2011 07:03:15 -0400 Subject: Lift the check for automount points into do_lookup() Signed-off-by: Al Viro --- fs/namei.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 988081424098..1ab641f2e78e 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -945,9 +945,6 @@ static bool __follow_mount_rcu(struct nameidata *nd, struct path *path, path->dentry = mounted->mnt_root; nd->seq = read_seqcount_begin(&path->dentry->d_seq); } - - if (unlikely(path->dentry->d_flags & DCACHE_NEED_AUTOMOUNT)) - return false; return true; } @@ -1164,8 +1161,11 @@ static int do_lookup(struct nameidata *nd, struct qstr *name, } path->mnt = mnt; path->dentry = dentry; - if (likely(__follow_mount_rcu(nd, path, inode))) - return 0; + if (unlikely(!__follow_mount_rcu(nd, path, inode))) + goto unlazy; + if (unlikely(path->dentry->d_flags & DCACHE_NEED_AUTOMOUNT)) + goto unlazy; + return 0; unlazy: if (unlazy_walk(nd, dentry)) return -ECHILD; -- cgit v1.2.3 From aa38572954ade525817fe88c54faebf85e5a61c0 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 27 May 2011 06:53:02 -0400 Subject: fs: pass exact type of data dirties to ->dirty_inode Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or anything else, so that the filesystem can track internally if it needs to push out a transaction for fdatasync or not. This is just the prototype change with no user for it yet. I plan to push large XFS changes for the next merge window, and getting this trivial infrastructure in this window would help a lot to avoid tree interdependencies. Also remove incorrect comments that ->dirty_inode can't block. That has been changed a long time ago, and many implementations rely on it. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- Documentation/filesystems/Locking | 4 ++-- Documentation/filesystems/vfs.txt | 2 +- fs/btrfs/ctree.h | 2 +- fs/btrfs/inode.c | 2 +- fs/ext3/inode.c | 2 +- fs/ext4/ext4.h | 2 +- fs/ext4/inode.c | 2 +- fs/fs-writeback.c | 5 +---- fs/jffs2/fs.c | 2 +- fs/jffs2/os-linux.h | 2 +- fs/jfs/inode.c | 2 +- fs/jfs/jfs_inode.h | 2 +- fs/nilfs2/inode.c | 2 +- fs/nilfs2/nilfs.h | 2 +- fs/reiserfs/super.c | 2 +- fs/ubifs/super.c | 2 +- fs/xfs/linux-2.6/xfs_super.c | 3 ++- include/linux/ext3_fs.h | 2 +- include/linux/fs.h | 2 +- 19 files changed, 21 insertions(+), 23 deletions(-) diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 61b31acb9176..57d827d6071d 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -104,7 +104,7 @@ of the locking scheme for directory operations. prototypes: struct inode *(*alloc_inode)(struct super_block *sb); void (*destroy_inode)(struct inode *); - void (*dirty_inode) (struct inode *); + void (*dirty_inode) (struct inode *, int flags); int (*write_inode) (struct inode *, struct writeback_control *wbc); int (*drop_inode) (struct inode *); void (*evict_inode) (struct inode *); @@ -126,7 +126,7 @@ locking rules: s_umount alloc_inode: destroy_inode: -dirty_inode: (must not sleep) +dirty_inode: write_inode: drop_inode: !!!inode->i_lock!!! evict_inode: diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index 21a7dc467bba..88b9f5519af9 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -211,7 +211,7 @@ struct super_operations { struct inode *(*alloc_inode)(struct super_block *sb); void (*destroy_inode)(struct inode *); - void (*dirty_inode) (struct inode *); + void (*dirty_inode) (struct inode *, int flags); int (*write_inode) (struct inode *, int); void (*drop_inode) (struct inode *); void (*delete_inode) (struct inode *); diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 8f4b81de3ae2..d2177e7ad647 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2522,7 +2522,7 @@ int btrfs_readpage(struct file *file, struct page *page); void btrfs_evict_inode(struct inode *inode); void btrfs_put_inode(struct inode *inode); int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc); -void btrfs_dirty_inode(struct inode *inode); +void btrfs_dirty_inode(struct inode *inode, int flags); struct inode *btrfs_alloc_inode(struct super_block *sb); void btrfs_destroy_inode(struct inode *inode); int btrfs_drop_inode(struct inode *inode); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 7cd8ab0ef04d..ecff7d7a505f 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4396,7 +4396,7 @@ int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc) * FIXME, needs more benchmarking...there are no reasons other than performance * to keep or drop this code. */ -void btrfs_dirty_inode(struct inode *inode) +void btrfs_dirty_inode(struct inode *inode, int flags) { struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_trans_handle *trans; diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 68b2e43d7c35..3451d23c3bae 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -3392,7 +3392,7 @@ int ext3_mark_inode_dirty(handle_t *handle, struct inode *inode) * so would cause a commit on atime updates, which we don't bother doing. * We handle synchronous inodes at the highest possible level. */ -void ext3_dirty_inode(struct inode *inode) +void ext3_dirty_inode(struct inode *inode, int flags) { handle_t *current_handle = ext3_journal_current_handle(); handle_t *handle; diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index a74b89c09f90..1921392cd708 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -1813,7 +1813,7 @@ extern int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry, extern void ext4_evict_inode(struct inode *); extern void ext4_clear_inode(struct inode *); extern int ext4_sync_inode(handle_t *, struct inode *); -extern void ext4_dirty_inode(struct inode *); +extern void ext4_dirty_inode(struct inode *, int); extern int ext4_change_inode_journal_flag(struct inode *, int); extern int ext4_get_inode_loc(struct inode *, struct ext4_iloc *); extern int ext4_can_truncate(struct inode *inode); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 50d0e9c64584..a5763e3505ba 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -5733,7 +5733,7 @@ int ext4_mark_inode_dirty(handle_t *handle, struct inode *inode) * so would cause a commit on atime updates, which we don't bother doing. * We handle synchronous inodes at the highest possible level. */ -void ext4_dirty_inode(struct inode *inode) +void ext4_dirty_inode(struct inode *inode, int flags) { handle_t *handle; diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 34591ee804b5..0f015a0468de 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -1007,9 +1007,6 @@ static noinline void block_dump___mark_inode_dirty(struct inode *inode) * In short, make sure you hash any inodes _before_ you start marking * them dirty. * - * This function *must* be atomic for the I_DIRTY_PAGES case - - * set_page_dirty() is called under spinlock in several places. - * * Note that for blockdevs, inode->dirtied_when represents the dirtying time of * the block-special inode (/dev/hda1) itself. And the ->dirtied_when field of * the kernel-internal blockdev inode represents the dirtying time of the @@ -1028,7 +1025,7 @@ void __mark_inode_dirty(struct inode *inode, int flags) */ if (flags & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) { if (sb->s_op->dirty_inode) - sb->s_op->dirty_inode(inode); + sb->s_op->dirty_inode(inode, flags); } /* diff --git a/fs/jffs2/fs.c b/fs/jffs2/fs.c index e896e67767eb..46ad619b6124 100644 --- a/fs/jffs2/fs.c +++ b/fs/jffs2/fs.c @@ -357,7 +357,7 @@ error: return ERR_PTR(ret); } -void jffs2_dirty_inode(struct inode *inode) +void jffs2_dirty_inode(struct inode *inode, int flags) { struct iattr iattr; diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h index 00bae7cc2e48..65c6c43ca482 100644 --- a/fs/jffs2/os-linux.h +++ b/fs/jffs2/os-linux.h @@ -172,7 +172,7 @@ int jffs2_setattr (struct dentry *, struct iattr *); int jffs2_do_setattr (struct inode *, struct iattr *); struct inode *jffs2_iget(struct super_block *, unsigned long); void jffs2_evict_inode (struct inode *); -void jffs2_dirty_inode(struct inode *inode); +void jffs2_dirty_inode(struct inode *inode, int flags); struct inode *jffs2_new_inode (struct inode *dir_i, int mode, struct jffs2_raw_inode *ri); int jffs2_statfs (struct dentry *, struct kstatfs *); diff --git a/fs/jfs/inode.c b/fs/jfs/inode.c index eddbb373209e..109655904bbc 100644 --- a/fs/jfs/inode.c +++ b/fs/jfs/inode.c @@ -173,7 +173,7 @@ void jfs_evict_inode(struct inode *inode) dquot_drop(inode); } -void jfs_dirty_inode(struct inode *inode) +void jfs_dirty_inode(struct inode *inode, int flags) { static int noisy = 5; diff --git a/fs/jfs/jfs_inode.h b/fs/jfs/jfs_inode.h index 155e91eff07d..ec2fb8b945fc 100644 --- a/fs/jfs/jfs_inode.h +++ b/fs/jfs/jfs_inode.h @@ -28,7 +28,7 @@ extern struct inode *jfs_iget(struct super_block *, unsigned long); extern int jfs_commit_inode(struct inode *, int); extern int jfs_write_inode(struct inode *, struct writeback_control *); extern void jfs_evict_inode(struct inode *); -extern void jfs_dirty_inode(struct inode *); +extern void jfs_dirty_inode(struct inode *, int); extern void jfs_truncate(struct inode *); extern void jfs_truncate_nolock(struct inode *, loff_t); extern void jfs_free_zero_link(struct inode *); diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c index 587f18432832..b954878ad6ce 100644 --- a/fs/nilfs2/inode.c +++ b/fs/nilfs2/inode.c @@ -917,7 +917,7 @@ int nilfs_mark_inode_dirty(struct inode *inode) * construction. This function can be called both as a single operation * and as a part of indivisible file operations. */ -void nilfs_dirty_inode(struct inode *inode) +void nilfs_dirty_inode(struct inode *inode, int flags) { struct nilfs_transaction_info ti; struct nilfs_mdt_info *mdi = NILFS_MDT(inode); diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h index a9c6a531f80c..f02b9ad43a21 100644 --- a/fs/nilfs2/nilfs.h +++ b/fs/nilfs2/nilfs.h @@ -269,7 +269,7 @@ int nilfs_load_inode_block(struct inode *inode, struct buffer_head **pbh); extern int nilfs_inode_dirty(struct inode *); int nilfs_set_file_dirty(struct inode *inode, unsigned nr_dirty); extern int nilfs_mark_inode_dirty(struct inode *); -extern void nilfs_dirty_inode(struct inode *); +extern void nilfs_dirty_inode(struct inode *, int flags); int nilfs_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, __u64 start, __u64 len); diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index b216ff6be1c9..aa91089162cb 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -568,7 +568,7 @@ static void destroy_inodecache(void) } /* we don't mark inodes dirty, we just log them */ -static void reiserfs_dirty_inode(struct inode *inode) +static void reiserfs_dirty_inode(struct inode *inode, int flags) { struct reiserfs_transaction_handle th; diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 6db0bdaa9f74..1ab0d22e4c94 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -382,7 +382,7 @@ done: end_writeback(inode); } -static void ubifs_dirty_inode(struct inode *inode) +static void ubifs_dirty_inode(struct inode *inode, int flags) { struct ubifs_inode *ui = ubifs_inode(inode); diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 98b9c91fcdf1..1e3a7ce804dc 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -925,7 +925,8 @@ xfs_fs_inode_init_once( */ STATIC void xfs_fs_dirty_inode( - struct inode *inode) + struct inode *inode, + int flags) { barrier(); XFS_I(inode)->i_update_core = 1; diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h index 85c1d302c12e..5e06acf95d0f 100644 --- a/include/linux/ext3_fs.h +++ b/include/linux/ext3_fs.h @@ -909,7 +909,7 @@ extern int ext3_setattr (struct dentry *, struct iattr *); extern void ext3_evict_inode (struct inode *); extern int ext3_sync_inode (handle_t *, struct inode *); extern void ext3_discard_reservation (struct inode *); -extern void ext3_dirty_inode(struct inode *); +extern void ext3_dirty_inode(struct inode *, int); extern int ext3_change_inode_journal_flag(struct inode *, int); extern int ext3_get_inode_loc(struct inode *, struct ext3_iloc *); extern int ext3_can_truncate(struct inode *inode); diff --git a/include/linux/fs.h b/include/linux/fs.h index 241609346dfb..573028df050d 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1618,7 +1618,7 @@ struct super_operations { struct inode *(*alloc_inode)(struct super_block *sb); void (*destroy_inode)(struct inode *); - void (*dirty_inode) (struct inode *); + void (*dirty_inode) (struct inode *, int flags); int (*write_inode) (struct inode *, struct writeback_control *wbc); int (*drop_inode) (struct inode *); void (*evict_inode) (struct inode *); -- cgit v1.2.3 From c74c0bfe0b61cf41a897c2444c038e0d3f600556 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Tue, 24 May 2011 14:11:05 +0200 Subject: IPVS: bug in ip_vs_ftp, same list heaad used in all netns. When ip_vs was adapted to netns the ftp application was not adapted in a correct way. However this is a fix to avoid kernel errors. In the long term another solution might be chosen. I.e the ports that the ftp appl, uses should be per netns. Signed-off-by: Hans Schillstrom Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso --- include/net/ip_vs.h | 3 ++- net/netfilter/ipvs/ip_vs_ftp.c | 27 +++++++++++++++++++-------- 2 files changed, 21 insertions(+), 9 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 4fff432aeade..481f856c650f 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -797,7 +797,8 @@ struct netns_ipvs { struct list_head rs_table[IP_VS_RTAB_SIZE]; /* ip_vs_app */ struct list_head app_list; - + /* ip_vs_ftp */ + struct ip_vs_app *ftp_app; /* ip_vs_proto */ #define IP_VS_PROTO_TAB_SIZE 32 /* must be power of 2 */ struct ip_vs_proto_data *proto_data_table[IP_VS_PROTO_TAB_SIZE]; diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c index 6b5dd6ddaae9..af63553fa332 100644 --- a/net/netfilter/ipvs/ip_vs_ftp.c +++ b/net/netfilter/ipvs/ip_vs_ftp.c @@ -411,25 +411,35 @@ static struct ip_vs_app ip_vs_ftp = { static int __net_init __ip_vs_ftp_init(struct net *net) { int i, ret; - struct ip_vs_app *app = &ip_vs_ftp; + struct ip_vs_app *app; + struct netns_ipvs *ipvs = net_ipvs(net); + + app = kmemdup(&ip_vs_ftp, sizeof(struct ip_vs_app), GFP_KERNEL); + if (!app) + return -ENOMEM; + INIT_LIST_HEAD(&app->a_list); + INIT_LIST_HEAD(&app->incs_list); + ipvs->ftp_app = app; ret = register_ip_vs_app(net, app); if (ret) - return ret; + goto err_exit; for (i=0; iprotocol, ports[i]); if (ret) - break; + goto err_unreg; pr_info("%s: loaded support on port[%d] = %d\n", app->name, i, ports[i]); } + return 0; - if (ret) - unregister_ip_vs_app(net, app); - +err_unreg: + unregister_ip_vs_app(net, app); +err_exit: + kfree(ipvs->ftp_app); return ret; } /* @@ -437,9 +447,10 @@ static int __net_init __ip_vs_ftp_init(struct net *net) */ static void __ip_vs_ftp_exit(struct net *net) { - struct ip_vs_app *app = &ip_vs_ftp; + struct netns_ipvs *ipvs = net_ipvs(net); - unregister_ip_vs_app(net, app); + unregister_ip_vs_app(net, ipvs->ftp_app); + kfree(ipvs->ftp_app); } static struct pernet_operations ip_vs_ftp_ops = { -- cgit v1.2.3 From 4a8fcc2cc34b7546584bf9ebd8f0caf433e4736e Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:09 -0700 Subject: [SCSI] target: Fix multi task->task_sg[] chaining logic bug This patch fixes a bug in transport_do_task_sg_chain() used by HW target mode modules with sg_chain() to provide a single sg_next() walkable memory layout for use with pci_map_sg() and friends. This patch addresses an issue with mapping multiple small block max_sector tasks across multiple struct se_task->task_sg[] mappings for HW target mode operation. This was causing OOPs with (cmd->t_task->t_tasks_no > 1) I/O traffic for HW target drivers using transport_do_task_sg_chain(), and has been tested so far with tcm_fc(openfcoe), tcm_qla2xxx, and ib_srpt fabrics with t_tasks_no > 1 IBLOCK backends using a smaller max_sectors to trigger the original issue. Signed-off-by: Nicholas Bellinger Acked-by: Kiran Patil Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/target/target_core_transport.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9583b23c9c84..fefe10a2aa94 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4776,18 +4776,20 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) sg_end_cur->page_link &= ~0x02; sg_chain(sg_head, task_sg_num, sg_head_cur); - sg_count += (task->task_sg_num + 1); - } else sg_count += task->task_sg_num; + task_sg_num = (task->task_sg_num + 1); + } else { + sg_chain(sg_head, task_sg_num, sg_head_cur); + sg_count += task->task_sg_num; + task_sg_num = task->task_sg_num; + } sg_head = sg_head_cur; sg_link = sg_link_cur; - task_sg_num = task->task_sg_num; continue; } sg_head = sg_first = &task->task_sg[0]; sg_link = &task->task_sg[task->task_sg_num]; - task_sg_num = task->task_sg_num; /* * Check for single task.. */ @@ -4798,9 +4800,12 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) */ sg_end = &task->task_sg[task->task_sg_num - 1]; sg_end->page_link &= ~0x02; - sg_count += (task->task_sg_num + 1); - } else sg_count += task->task_sg_num; + task_sg_num = (task->task_sg_num + 1); + } else { + sg_count += task->task_sg_num; + task_sg_num = task->task_sg_num; + } } /* * Setup the starting pointer and total t_tasks_sg_linked_no including @@ -4809,21 +4814,20 @@ void transport_do_task_sg_chain(struct se_cmd *cmd) T_TASK(cmd)->t_tasks_sg_chained = sg_first; T_TASK(cmd)->t_tasks_sg_chained_no = sg_count; - DEBUG_CMD_M("Setup T_TASK(cmd)->t_tasks_sg_chained: %p and" - " t_tasks_sg_chained_no: %u\n", T_TASK(cmd)->t_tasks_sg_chained, + DEBUG_CMD_M("Setup cmd: %p T_TASK(cmd)->t_tasks_sg_chained: %p and" + " t_tasks_sg_chained_no: %u\n", cmd, T_TASK(cmd)->t_tasks_sg_chained, T_TASK(cmd)->t_tasks_sg_chained_no); for_each_sg(T_TASK(cmd)->t_tasks_sg_chained, sg, T_TASK(cmd)->t_tasks_sg_chained_no, i) { - DEBUG_CMD_M("SG: %p page: %p length: %d offset: %d\n", - sg, sg_page(sg), sg->length, sg->offset); + DEBUG_CMD_M("SG[%d]: %p page: %p length: %d offset: %d, magic: 0x%08x\n", + i, sg, sg_page(sg), sg->length, sg->offset, sg->sg_magic); if (sg_is_chain(sg)) DEBUG_CMD_M("SG: %p sg_is_chain=1\n", sg); if (sg_is_last(sg)) DEBUG_CMD_M("SG: %p sg_is_last=1\n", sg); } - } EXPORT_SYMBOL(transport_do_task_sg_chain); -- cgit v1.2.3 From 1e7de68c57daf75ec4b721f101f88cccf029e38c Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:10 -0700 Subject: [SCSI] target: Fix interrupt context bug with stats_lock and core_tmr_alloc_req This patch fixes two bugs wrt to the interrupt context usage of target core with HW target mode drivers. It first converts the usage of struct se_device->stats_lock in transport_get_lun_for_cmd() and core_tmr_lun_reset() to properly use spin_lock_irq() to address an BUG with CONFIG_LOCKDEP_SUPPORT=y enabled. This patch also adds a 'in_interrupt()' check to allow GFP_ATOMIC usage from core_tmr_alloc_req() to fix a 'sleeping in interrupt context' BUG with HW target fabrics that require this logic to function. Signed-off-by: Nicholas Bellinger Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/target/target_core_device.c | 4 ++-- drivers/target/target_core_tmr.c | 7 ++++--- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index d25e20829012..fc10ed4ac493 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -150,13 +150,13 @@ out: { struct se_device *dev = se_lun->lun_se_dev; - spin_lock(&dev->stats_lock); + spin_lock_irq(&dev->stats_lock); dev->num_cmds++; if (se_cmd->data_direction == DMA_TO_DEVICE) dev->write_bytes += se_cmd->data_length; else if (se_cmd->data_direction == DMA_FROM_DEVICE) dev->read_bytes += se_cmd->data_length; - spin_unlock(&dev->stats_lock); + spin_unlock_irq(&dev->stats_lock); } /* diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 4a109835e420..59b8b9c5ad72 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -55,7 +55,8 @@ struct se_tmr_req *core_tmr_alloc_req( { struct se_tmr_req *tmr; - tmr = kmem_cache_zalloc(se_tmr_req_cache, GFP_KERNEL); + tmr = kmem_cache_zalloc(se_tmr_req_cache, (in_interrupt()) ? + GFP_ATOMIC : GFP_KERNEL); if (!(tmr)) { printk(KERN_ERR "Unable to allocate struct se_tmr_req\n"); return ERR_PTR(-ENOMEM); @@ -398,9 +399,9 @@ int core_tmr_lun_reset( printk(KERN_INFO "LUN_RESET: SCSI-2 Released reservation\n"); } - spin_lock(&dev->stats_lock); + spin_lock_irq(&dev->stats_lock); dev->num_resets++; - spin_unlock(&dev->stats_lock); + spin_unlock_irq(&dev->stats_lock); DEBUG_LR("LUN_RESET: %s for [%s] Complete\n", (preempt_and_abort_list) ? "Preempt" : "TMR", -- cgit v1.2.3 From 42c6951e2f7a665bcb57b92fe3f806ba48152c0e Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:11 -0700 Subject: [SCSI] target: Fix bug with task_sg chained transport_free_dev_tasks release This patch addresses a bug in the target core release path for HW operation where transport_free_dev_tasks() was incorrectly being called from transport_lun_remove_cmd() while releasing a se_cmd reference and calling struct target_core_fabric_ops->queue_data_in(). This would result in a OOPs with HW target mode when the release of se_task->task_sg[] would happen before pci_unmap_sg() can be called in HW target mode fabric module code. This patch addresses the issue by moving transport_free_dev_tasks() from transport_lun_remove_cmd() into transport_generic_free_cmd(), and adding TRANSPORT_FREE_CMD_INTR and transport_generic_free_cmd_intr() to allow se_cmd descriptor release to happen fromfrom within transport_processing_thread() process context when release of se_cmd is not possible from HW interrupt context. Signed-off-by: Nicholas Bellinger Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/target/target_core_transport.c | 13 ++++++++++++- include/target/target_core_base.h | 1 + include/target/target_core_transport.h | 1 + 3 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index fefe10a2aa94..3eeb3e2436f1 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -762,7 +762,6 @@ static void transport_lun_remove_cmd(struct se_cmd *cmd) transport_all_task_dev_remove_state(cmd); spin_unlock_irqrestore(&T_TASK(cmd)->t_state_lock, flags); - transport_free_dev_tasks(cmd); check_lun: spin_lock_irqsave(&lun->lun_cmd_lock, flags); @@ -2058,6 +2057,13 @@ int transport_generic_handle_tmr( } EXPORT_SYMBOL(transport_generic_handle_tmr); +void transport_generic_free_cmd_intr( + struct se_cmd *cmd) +{ + transport_add_cmd_to_queue(cmd, TRANSPORT_FREE_CMD_INTR); +} +EXPORT_SYMBOL(transport_generic_free_cmd_intr); + static int transport_stop_tasks_for_cmd(struct se_cmd *cmd) { struct se_task *task, *task_tmp; @@ -5301,6 +5307,8 @@ void transport_generic_free_cmd( if (wait_for_tasks && cmd->transport_wait_for_tasks) cmd->transport_wait_for_tasks(cmd, 0, 0); + transport_free_dev_tasks(cmd); + transport_generic_remove(cmd, release_to_pool, session_reinstatement); } @@ -6136,6 +6144,9 @@ get_cmd: case TRANSPORT_REMOVE: transport_generic_remove(cmd, 1, 0); break; + case TRANSPORT_FREE_CMD_INTR: + transport_generic_free_cmd(cmd, 0, 1, 0); + break; case TRANSPORT_PROCESS_TMR: transport_generic_do_tmr(cmd); break; diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 1d3b5b2f0dbc..561ac99def5a 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -98,6 +98,7 @@ enum transport_state_table { TRANSPORT_REMOVE = 14, TRANSPORT_FREE = 15, TRANSPORT_NEW_CMD_MAP = 16, + TRANSPORT_FREE_CMD_INTR = 17, }; /* Used for struct se_cmd->se_cmd_flags */ diff --git a/include/target/target_core_transport.h b/include/target/target_core_transport.h index 59aa464f6ee2..24a1c6cb83c3 100644 --- a/include/target/target_core_transport.h +++ b/include/target/target_core_transport.h @@ -172,6 +172,7 @@ extern int transport_generic_handle_cdb_map(struct se_cmd *); extern int transport_generic_handle_data(struct se_cmd *); extern void transport_new_cmd_failure(struct se_cmd *); extern int transport_generic_handle_tmr(struct se_cmd *); +extern void transport_generic_free_cmd_intr(struct se_cmd *); extern void __transport_stop_task_timer(struct se_task *, unsigned long *); extern unsigned char transport_asciihex_to_binaryhex(unsigned char val[2]); extern int transport_generic_map_mem_to_cmd(struct se_cmd *cmd, struct scatterlist *, u32, -- cgit v1.2.3 From ccf4d680f80941f0073a9bc6a5e0ed41496b46e7 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:12 -0700 Subject: [SCSI] target: Fix task->task_execute_queue=1 clear bug + LUN_RESET OOPs This patch fixes a bug where task->task_execute_queue=1 was not being cleared once se_task had been removed from se_device->execute_task_list, resulting in an OOPs in core_tmr_lun_reset() for the task->task_active=0 case where transport_remove_task_from_execute_queue() was incorrectly being called. This patch fixes two cases in transport_get_task_from_execute_queue() and transport_remove_task_from_execute_queue() to properly clear task->task_execute_queue=0 once list_del(&task->t_execute_list) has been called. It also adds an explict check in transport_remove_task_from_execute_queue() to dump_stack + return if called with task->task_execute_queue=0. Signed-off-by: Nicholas Bellinger Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/target/target_core_transport.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 3eeb3e2436f1..beaf8fa89124 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1194,6 +1194,7 @@ transport_get_task_from_execute_queue(struct se_device *dev) break; list_del(&task->t_execute_list); + atomic_set(&task->task_execute_queue, 0); atomic_dec(&dev->execute_tasks); return task; @@ -1209,8 +1210,14 @@ void transport_remove_task_from_execute_queue( { unsigned long flags; + if (atomic_read(&task->task_execute_queue) == 0) { + dump_stack(); + return; + } + spin_lock_irqsave(&dev->execute_task_lock, flags); list_del(&task->t_execute_list); + atomic_set(&task->task_execute_queue, 0); atomic_dec(&dev->execute_tasks); spin_unlock_irqrestore(&dev->execute_task_lock, flags); } -- cgit v1.2.3 From 1078da163fd2c1d3cba76cd4018e897a4f98efc5 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:13 -0700 Subject: [SCSI] target: Convert REPORT_LUNs to use int_to_scsilun This patch converts transport_core_report_lun_response() to use drivers/scsi/scsi_scan.c:int_to_scsilun instead of using the struct target_core_fabric_ops->pack_lun() fabric provided API vector. It also removes the tfo->pack_lun check from target_fabric_tf_ops_check() and removes from struct target_core_fabric_ops->pack_lun() from target_core_fabric_ops.h, and the following mainline scsi-misc fabric modules: *) tcm_loop: Drop tcm_loop_pack_lun() usage *) tcm_fc: Drop ft_pack_lun() usage Reported-by: Mike Christie Signed-off-by: Nicholas A. Bellinger Signed-off-by: James Bottomley --- drivers/target/loopback/tcm_loop.c | 13 ------------- drivers/target/target_core_configfs.c | 4 ---- drivers/target/target_core_device.c | 25 +++++-------------------- drivers/target/tcm_fc/tfc_conf.c | 8 -------- include/target/target_core_fabric_ops.h | 1 - 5 files changed, 5 insertions(+), 46 deletions(-) diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index aed4e464d31c..09681bafe10d 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -939,18 +939,6 @@ static u16 tcm_loop_get_fabric_sense_len(void) return 0; } -static u64 tcm_loop_pack_lun(unsigned int lun) -{ - u64 result; - - /* LSB of lun into byte 1 big-endian */ - result = ((lun & 0xff) << 8); - /* use flat space addressing method */ - result |= 0x40 | ((lun >> 8) & 0x3f); - - return cpu_to_le64(result); -} - static char *tcm_loop_dump_proto_id(struct tcm_loop_hba *tl_hba) { switch (tl_hba->tl_proto_id) { @@ -1481,7 +1469,6 @@ static int tcm_loop_register_configfs(void) fabric->tf_ops.set_fabric_sense_len = &tcm_loop_set_fabric_sense_len; fabric->tf_ops.get_fabric_sense_len = &tcm_loop_get_fabric_sense_len; fabric->tf_ops.is_state_remove = &tcm_loop_is_state_remove; - fabric->tf_ops.pack_lun = &tcm_loop_pack_lun; tf_cg = &fabric->tf_group; /* diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index a5f44a6e6e1d..ee6fad979b50 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -497,10 +497,6 @@ static int target_fabric_tf_ops_check( printk(KERN_ERR "Missing tfo->is_state_remove()\n"); return -EINVAL; } - if (!(tfo->pack_lun)) { - printk(KERN_ERR "Missing tfo->pack_lun()\n"); - return -EINVAL; - } /* * We at least require tfo->fabric_make_wwn(), tfo->fabric_drop_wwn() * tfo->fabric_make_tpg() and tfo->fabric_drop_tpg() in diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index fc10ed4ac493..8407f9ca2b31 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include @@ -658,8 +659,7 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) struct se_session *se_sess = SE_SESS(se_cmd); struct se_task *se_task; unsigned char *buf = (unsigned char *)T_TASK(se_cmd)->t_task_buf; - u32 cdb_offset = 0, lun_count = 0, offset = 8; - u64 i, lun; + u32 cdb_offset = 0, lun_count = 0, offset = 8, i; list_for_each_entry(se_task, &T_TASK(se_cmd)->t_task_list, t_list) break; @@ -675,15 +675,7 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) * a $FABRIC_MOD. In that case, report LUN=0 only. */ if (!(se_sess)) { - lun = 0; - buf[offset++] = ((lun >> 56) & 0xff); - buf[offset++] = ((lun >> 48) & 0xff); - buf[offset++] = ((lun >> 40) & 0xff); - buf[offset++] = ((lun >> 32) & 0xff); - buf[offset++] = ((lun >> 24) & 0xff); - buf[offset++] = ((lun >> 16) & 0xff); - buf[offset++] = ((lun >> 8) & 0xff); - buf[offset++] = (lun & 0xff); + int_to_scsilun(0, (struct scsi_lun *)&buf[offset]); lun_count = 1; goto done; } @@ -703,15 +695,8 @@ int transport_core_report_lun_response(struct se_cmd *se_cmd) if ((cdb_offset + 8) >= se_cmd->data_length) continue; - lun = cpu_to_be64(CMD_TFO(se_cmd)->pack_lun(deve->mapped_lun)); - buf[offset++] = ((lun >> 56) & 0xff); - buf[offset++] = ((lun >> 48) & 0xff); - buf[offset++] = ((lun >> 40) & 0xff); - buf[offset++] = ((lun >> 32) & 0xff); - buf[offset++] = ((lun >> 24) & 0xff); - buf[offset++] = ((lun >> 16) & 0xff); - buf[offset++] = ((lun >> 8) & 0xff); - buf[offset++] = (lun & 0xff); + int_to_scsilun(deve->mapped_lun, (struct scsi_lun *)&buf[offset]); + offset += 8; cdb_offset += 8; } spin_unlock_irq(&SE_NODE_ACL(se_sess)->device_list_lock); diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index fcdbbffe88cc..84e868c255dd 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -519,13 +519,6 @@ static u32 ft_tpg_get_inst_index(struct se_portal_group *se_tpg) return tpg->index; } -static u64 ft_pack_lun(unsigned int index) -{ - WARN_ON(index >= 256); - /* Caller wants this byte-swapped */ - return cpu_to_le64((index & 0xff) << 8); -} - static struct target_core_fabric_ops ft_fabric_ops = { .get_fabric_name = ft_get_fabric_name, .get_fabric_proto_ident = fc_get_fabric_proto_ident, @@ -564,7 +557,6 @@ static struct target_core_fabric_ops ft_fabric_ops = { .get_fabric_sense_len = ft_get_fabric_sense_len, .set_fabric_sense_len = ft_set_fabric_sense_len, .is_state_remove = ft_is_state_remove, - .pack_lun = ft_pack_lun, /* * Setup function pointers for generic logic in * target_core_fabric_configfs.c diff --git a/include/target/target_core_fabric_ops.h b/include/target/target_core_fabric_ops.h index dc78f77f9450..747e1404dca0 100644 --- a/include/target/target_core_fabric_ops.h +++ b/include/target/target_core_fabric_ops.h @@ -77,7 +77,6 @@ struct target_core_fabric_ops { u16 (*set_fabric_sense_len)(struct se_cmd *, u32); u16 (*get_fabric_sense_len)(void); int (*is_state_remove)(struct se_cmd *); - u64 (*pack_lun)(unsigned int); /* * fabric module calls for target_core_fabric_configfs.c */ -- cgit v1.2.3 From 61db1802bf33bf027cd97ba3f79566b2b2fce5c6 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 19 May 2011 20:19:14 -0700 Subject: [SCSI] target: Convert TASK_ATTR to scsi_tcq.h definitions This patch converts target core and follwing scsi-misc upstream fabric modules to use include/scsi/scsi_tcq.h includes for SIMPLE, HEAD_OF_QUEUE and ORDERED SCSI tasks instead of scsi/libsas.h with TASK_ATTR* *) tcm_loop: Convert tcm_loop_allocate_core_cmd() + tcm_loop_device_reset() to scsi_tcq.h *) tcm_fc: Convert ft_send_cmd() from FCP_PTA_* to scsi_tcq.h Reported-by: Christoph Hellwig Signed-off-by: Nicholas A. Bellinger Signed-off-by: James Bottomley --- drivers/target/loopback/tcm_loop.c | 12 ++++++------ drivers/target/target_core_pscsi.c | 4 ++-- drivers/target/target_core_transport.c | 22 +++++++++++----------- drivers/target/tcm_fc/tfc_cmd.c | 20 +++++++++++++++++++- include/scsi/scsi_tcq.h | 1 + 5 files changed, 39 insertions(+), 20 deletions(-) diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index 09681bafe10d..dee2a2c909f5 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -31,7 +31,7 @@ #include #include #include -#include /* For TASK_ATTR_* */ +#include #include #include @@ -95,17 +95,17 @@ static struct se_cmd *tcm_loop_allocate_core_cmd( if (sc->device->tagged_supported) { switch (sc->tag) { case HEAD_OF_QUEUE_TAG: - sam_task_attr = TASK_ATTR_HOQ; + sam_task_attr = MSG_HEAD_TAG; break; case ORDERED_QUEUE_TAG: - sam_task_attr = TASK_ATTR_ORDERED; + sam_task_attr = MSG_ORDERED_TAG; break; default: - sam_task_attr = TASK_ATTR_SIMPLE; + sam_task_attr = MSG_SIMPLE_TAG; break; } } else - sam_task_attr = TASK_ATTR_SIMPLE; + sam_task_attr = MSG_SIMPLE_TAG; /* * Initialize struct se_cmd descriptor from target_core_mod infrastructure @@ -379,7 +379,7 @@ static int tcm_loop_device_reset(struct scsi_cmnd *sc) * Initialize struct se_cmd descriptor from target_core_mod infrastructure */ transport_init_se_cmd(se_cmd, se_tpg->se_tpg_tfo, se_sess, 0, - DMA_NONE, TASK_ATTR_SIMPLE, + DMA_NONE, MSG_SIMPLE_TAG, &tl_cmd->tl_sense_buf[0]); /* * Allocate the LUN_RESET TMR diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 7ff6a35f26ac..331d423fd0e0 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -41,7 +41,7 @@ #include #include #include -#include /* For TASK_ATTR_* */ +#include #include #include @@ -911,7 +911,7 @@ static int pscsi_do_task(struct se_task *task) * descriptor */ blk_execute_rq_nowait(pdv->pdv_sd->request_queue, NULL, pt->pscsi_req, - (task->task_se_cmd->sam_task_attr == TASK_ATTR_HOQ), + (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG), pscsi_req_done); return PYX_TRANSPORT_SENT_TO_TRANSPORT; diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index beaf8fa89124..5b1ce81e3aa7 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -42,7 +42,7 @@ #include #include #include -#include /* For TASK_ATTR_* */ +#include #include #include @@ -1074,7 +1074,7 @@ static inline int transport_add_task_check_sam_attr( * head of the struct se_device->execute_task_list, and task_prev * after that for each subsequent task */ - if (task->task_se_cmd->sam_task_attr == TASK_ATTR_HOQ) { + if (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG) { list_add(&task->t_execute_list, (task_prev != NULL) ? &task_prev->t_execute_list : @@ -1873,7 +1873,7 @@ static int transport_check_alloc_task_attr(struct se_cmd *cmd) if (SE_DEV(cmd)->dev_task_attr_type != SAM_TASK_ATTR_EMULATED) return 0; - if (cmd->sam_task_attr == TASK_ATTR_ACA) { + if (cmd->sam_task_attr == MSG_ACA_TAG) { DEBUG_STA("SAM Task Attribute ACA" " emulation is not supported\n"); return -1; @@ -2517,7 +2517,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) * Check for the existence of HEAD_OF_QUEUE, and if true return 1 * to allow the passed struct se_cmd list of tasks to the front of the list. */ - if (cmd->sam_task_attr == TASK_ATTR_HOQ) { + if (cmd->sam_task_attr == MSG_HEAD_TAG) { atomic_inc(&SE_DEV(cmd)->dev_hoq_count); smp_mb__after_atomic_inc(); DEBUG_STA("Added HEAD_OF_QUEUE for CDB:" @@ -2525,7 +2525,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) T_TASK(cmd)->t_task_cdb[0], cmd->se_ordered_id); return 1; - } else if (cmd->sam_task_attr == TASK_ATTR_ORDERED) { + } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { spin_lock(&SE_DEV(cmd)->ordered_cmd_lock); list_add_tail(&cmd->se_ordered_list, &SE_DEV(cmd)->ordered_cmd_list); @@ -3424,7 +3424,7 @@ static int transport_generic_cmd_sequencer( * See spc4r17 section 5.3 */ if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) - cmd->sam_task_attr = TASK_ATTR_HOQ; + cmd->sam_task_attr = MSG_HEAD_TAG; cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; break; case READ_BUFFER: @@ -3632,7 +3632,7 @@ static int transport_generic_cmd_sequencer( * See spc4r17 section 5.3 */ if (SE_DEV(cmd)->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) - cmd->sam_task_attr = TASK_ATTR_HOQ; + cmd->sam_task_attr = MSG_HEAD_TAG; cmd->se_cmd_flags |= SCF_SCSI_CONTROL_NONSG_IO_CDB; break; default: @@ -3790,21 +3790,21 @@ static void transport_complete_task_attr(struct se_cmd *cmd) struct se_cmd *cmd_p, *cmd_tmp; int new_active_tasks = 0; - if (cmd->sam_task_attr == TASK_ATTR_SIMPLE) { + if (cmd->sam_task_attr == MSG_SIMPLE_TAG) { atomic_dec(&dev->simple_cmds); smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; DEBUG_STA("Incremented dev->dev_cur_ordered_id: %u for" " SIMPLE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); - } else if (cmd->sam_task_attr == TASK_ATTR_HOQ) { + } else if (cmd->sam_task_attr == MSG_HEAD_TAG) { atomic_dec(&dev->dev_hoq_count); smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; DEBUG_STA("Incremented dev_cur_ordered_id: %u for" " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); - } else if (cmd->sam_task_attr == TASK_ATTR_ORDERED) { + } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { spin_lock(&dev->ordered_cmd_lock); list_del(&cmd->se_ordered_list); atomic_dec(&dev->dev_ordered_sync); @@ -3837,7 +3837,7 @@ static void transport_complete_task_attr(struct se_cmd *cmd) new_active_tasks++; spin_lock(&dev->delayed_cmd_lock); - if (cmd_p->sam_task_attr == TASK_ATTR_ORDERED) + if (cmd_p->sam_task_attr == MSG_ORDERED_TAG) break; } spin_unlock(&dev->delayed_cmd_lock); diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 49e51778f733..c056a1132ae1 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -35,6 +35,7 @@ #include #include #include +#include #include #include @@ -592,8 +593,25 @@ static void ft_send_cmd(struct ft_cmd *cmd) case FCP_CFL_WRDATA | FCP_CFL_RDDATA: goto err; /* TBD not supported by tcm_fc yet */ } + /* + * Locate the SAM Task Attr from fc_pri_ta + */ + switch (fcp->fc_pri_ta & FCP_PTA_MASK) { + case FCP_PTA_HEADQ: + task_attr = MSG_HEAD_TAG; + break; + case FCP_PTA_ORDERED: + task_attr = MSG_ORDERED_TAG; + break; + case FCP_PTA_ACA: + task_attr = MSG_ACA_TAG; + break; + case FCP_PTA_SIMPLE: /* Fallthrough */ + default: + task_attr = MSG_SIMPLE_TAG; + } + - /* FCP_PTA_ maps 1:1 to TASK_ATTR_ */ task_attr = fcp->fc_pri_ta & FCP_PTA_MASK; data_len = ntohl(fcp->fc_dl); cmd->cdb = fcp->fc_cdb; diff --git a/include/scsi/scsi_tcq.h b/include/scsi/scsi_tcq.h index d6e7994aa634..81dd12edc38c 100644 --- a/include/scsi/scsi_tcq.h +++ b/include/scsi/scsi_tcq.h @@ -9,6 +9,7 @@ #define MSG_SIMPLE_TAG 0x20 #define MSG_HEAD_TAG 0x21 #define MSG_ORDERED_TAG 0x22 +#define MSG_ACA_TAG 0x24 /* unsupported */ #define SCSI_NO_TAG (-1) /* identify no tag in use */ -- cgit v1.2.3 From 55b23bde19c08f14127a27d461a4e079942c7258 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Fri, 27 May 2011 14:50:36 +0200 Subject: xattr: Fix error results for non-existent / invisible attributes Return -ENODATA when trying to read a user.* attribute which cannot exist: user space otherwise does not have a reasonable way to distinguish between non-existent and inaccessible attributes. Likewise, return -ENODATA when an unprivileged process tries to read a trusted.* attribute: to unprivileged processes, those attributes are invisible (listxattr() won't include them). Related to this bug report: https://bugzilla.redhat.com/660613 Signed-off-by: Andreas Gruenbacher Signed-off-by: Al Viro --- fs/xattr.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/fs/xattr.c b/fs/xattr.c index f1ef94974dea..4be2e7666d02 100644 --- a/fs/xattr.c +++ b/fs/xattr.c @@ -46,18 +46,22 @@ xattr_permission(struct inode *inode, const char *name, int mask) return 0; /* - * The trusted.* namespace can only be accessed by a privileged user. + * The trusted.* namespace can only be accessed by privileged users. */ - if (!strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN)) - return (capable(CAP_SYS_ADMIN) ? 0 : -EPERM); + if (!strncmp(name, XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN)) { + if (!capable(CAP_SYS_ADMIN)) + return (mask & MAY_WRITE) ? -EPERM : -ENODATA; + return 0; + } - /* In user.* namespace, only regular files and directories can have + /* + * In the user.* namespace, only regular files and directories can have * extended attributes. For sticky directories, only the owner and - * privileged user can write attributes. + * privileged users can write attributes. */ if (!strncmp(name, XATTR_USER_PREFIX, XATTR_USER_PREFIX_LEN)) { if (!S_ISREG(inode->i_mode) && !S_ISDIR(inode->i_mode)) - return -EPERM; + return (mask & MAY_WRITE) ? -EPERM : -ENODATA; if (S_ISDIR(inode->i_mode) && (inode->i_mode & S_ISVTX) && (mask & MAY_WRITE) && !inode_owner_or_capable(inode)) return -EPERM; -- cgit v1.2.3 From c642808454ac81d6a6701da6022e93bbe47bb38b Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Fri, 27 May 2011 14:52:09 +0200 Subject: vfs: Improve the bio_add_page() and bio_add_pc_page() descriptions The descriptions of bio_add_page() and bio_add_pc_page() are slightly inconsistent; improve them. Signed-off-by: Andreas Gruenbacher Signed-off-by: Al Viro --- fs/bio.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 840a0d755248..9bfade8a609b 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -638,10 +638,11 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page * @offset: vec entry offset * * Attempt to add a page to the bio_vec maplist. This can fail for a - * number of reasons, such as the bio being full or target block - * device limitations. The target block device must allow bio's - * smaller than PAGE_SIZE, so it is always possible to add a single - * page to an empty bio. This should only be used by REQ_PC bios. + * number of reasons, such as the bio being full or target block device + * limitations. The target block device must allow bio's up to PAGE_SIZE, + * so it is always possible to add a single page to an empty bio. + * + * This should only be used by REQ_PC bios. */ int bio_add_pc_page(struct request_queue *q, struct bio *bio, struct page *page, unsigned int len, unsigned int offset) @@ -659,10 +660,9 @@ EXPORT_SYMBOL(bio_add_pc_page); * @offset: vec entry offset * * Attempt to add a page to the bio_vec maplist. This can fail for a - * number of reasons, such as the bio being full or target block - * device limitations. The target block device must allow bio's - * smaller than PAGE_SIZE, so it is always possible to add a single - * page to an empty bio. + * number of reasons, such as the bio being full or target block device + * limitations. The target block device must allow bio's up to PAGE_SIZE, + * so it is always possible to add a single page to an empty bio. */ int bio_add_page(struct bio *bio, struct page *page, unsigned int len, unsigned int offset) -- cgit v1.2.3 From 4b4563dc80594c6a2580aa52d9fcf0177a27074e Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 27 May 2011 09:28:01 -0400 Subject: fs: cosmetic inode.c cleanups Move the lock order description after all the includes, remove several fairly outdated and/or incorrect comments, move Andrea's copyright/changelog to the top where it belongs, remove the pointless filename in the top of the file comment, and remove to useless macros. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/inode.c | 54 +++++------------------------------------------------- 1 file changed, 5 insertions(+), 49 deletions(-) diff --git a/fs/inode.c b/fs/inode.c index 990d284877a1..0f7e88a7803f 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -1,9 +1,7 @@ /* - * linux/fs/inode.c - * * (C) 1997 Linus Torvalds + * (C) 1999 Andrea Arcangeli (dynamic inode allocation) */ - #include #include #include @@ -27,10 +25,11 @@ #include #include #include +#include /* for inode_has_buffers */ #include "internal.h" /* - * inode locking rules. + * Inode locking rules: * * inode->i_lock protects: * inode->i_state, inode->i_hash, __iget() @@ -60,54 +59,11 @@ * inode_hash_lock */ -/* - * This is needed for the following functions: - * - inode_has_buffers - * - invalidate_bdev - * - * FIXME: remove all knowledge of the buffer layer from this file - */ -#include - -/* - * New inode.c implementation. - * - * This implementation has the basic premise of trying - * to be extremely low-overhead and SMP-safe, yet be - * simple enough to be "obviously correct". - * - * Famous last words. - */ - -/* inode dynamic allocation 1999, Andrea Arcangeli */ - -/* #define INODE_PARANOIA 1 */ -/* #define INODE_DEBUG 1 */ - -/* - * Inode lookup is no longer as critical as it used to be: - * most of the lookups are going to be through the dcache. - */ -#define I_HASHBITS i_hash_shift -#define I_HASHMASK i_hash_mask - static unsigned int i_hash_mask __read_mostly; static unsigned int i_hash_shift __read_mostly; static struct hlist_head *inode_hashtable __read_mostly; static __cacheline_aligned_in_smp DEFINE_SPINLOCK(inode_hash_lock); -/* - * Each inode can be on two separate lists. One is - * the hash list of the inode, used for lookups. The - * other linked list is the "type" list: - * "in_use" - valid inode, i_count > 0, i_nlink > 0 - * "dirty" - as "in_use" but also dirty - * "unused" - valid inode, i_count = 0 - * - * A "dirty" list is maintained for each super block, - * allowing for low-overhead inode sync() operations. - */ - static LIST_HEAD(inode_lru); static DEFINE_SPINLOCK(inode_lru_lock); @@ -424,8 +380,8 @@ static unsigned long hash(struct super_block *sb, unsigned long hashval) tmp = (hashval * (unsigned long)sb) ^ (GOLDEN_RATIO_PRIME + hashval) / L1_CACHE_BYTES; - tmp = tmp ^ ((tmp ^ GOLDEN_RATIO_PRIME) >> I_HASHBITS); - return tmp & I_HASHMASK; + tmp = tmp ^ ((tmp ^ GOLDEN_RATIO_PRIME) >> i_hash_shift); + return tmp & i_hash_mask; } /** -- cgit v1.2.3 From 1007da0604b1d2f064bfecece0f131d57237b03f Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 26 May 2011 09:57:33 -0600 Subject: ASoC: Fix dapm_is_shared_kcontrol so everything isn't shared Commit af46800 ("ASoC: Implement mux control sharing") introduced function dapm_is_shared_kcontrol. When this function returns true, the naming of DAPM controls is derived from the kcontrol_new. Otherwise, the name comes from the widget (and possibly a widget's naming prefix). A bug in the implementation of dapm_is_shared_kcontrol made it return 1 in all cases. Hence, that commit caused a change in control naming for all controls instead of just shared controls. Specifically, a control is always considered shared because it is always compared against itself. Solve this by never comparing against the widget containing the control being created. Equally, controls should never be shared between DAPM contexts; when the same codec is instantiated multiple times, the same kcontrol_new will be used. However, the control should no be shared between the multiple instances. I tested that with the Tegra WM8903 driver: * Shared is now mostly 0 as expected, and sometimes 1. * The expected controls are still generated after this change. However, I don't have any systems that have a widget/control naming prefix, so I can't test that aspect. Thanks for Jarkko Nikula for pointing out how to fix this. Reported-by: Liam Girdwood Tested-by: Jarkko Nikula Signed-off-by: Stephen Warren Acked-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-dapm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 999bb08cdfb1..776e6f418306 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -325,6 +325,7 @@ static int dapm_connect_mixer(struct snd_soc_dapm_context *dapm, } static int dapm_is_shared_kcontrol(struct snd_soc_dapm_context *dapm, + struct snd_soc_dapm_widget *kcontrolw, const struct snd_kcontrol_new *kcontrol_new, struct snd_kcontrol **kcontrol) { @@ -334,6 +335,8 @@ static int dapm_is_shared_kcontrol(struct snd_soc_dapm_context *dapm, *kcontrol = NULL; list_for_each_entry(w, &dapm->card->widgets, list) { + if (w == kcontrolw || w->dapm != kcontrolw->dapm) + continue; for (i = 0; i < w->num_kcontrols; i++) { if (&w->kcontrol_news[i] == kcontrol_new) { if (w->kcontrols) @@ -468,7 +471,7 @@ static int dapm_new_mux(struct snd_soc_dapm_context *dapm, return -EINVAL; } - shared = dapm_is_shared_kcontrol(dapm, &w->kcontrol_news[0], + shared = dapm_is_shared_kcontrol(dapm, w, &w->kcontrol_news[0], &kcontrol); if (kcontrol) { wlist = kcontrol->private_data; -- cgit v1.2.3 From 174ba50915b08dcfd07c8b5fb795b46a165fa09a Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 27 May 2011 10:03:58 -0400 Subject: Btrfs: use the device_list_mutex during write_dev_supers write_dev_supers was changed to use RCU to protect the list of devices, but it was then sleeping while it actually wrote the supers. This fixes it to just use the mutex, since we really don't any concurrency in write_dev_supers anyway. Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index b2588a552658..98b6a71decba 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2310,7 +2310,7 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors) sb = &root->fs_info->super_for_commit; dev_item = &sb->dev_item; - rcu_read_lock(); + mutex_lock(&root->fs_info->fs_devices->device_list_mutex); head = &root->fs_info->fs_devices->devices; list_for_each_entry_rcu(dev, head, dev_list) { if (!dev->bdev) { @@ -2355,7 +2355,7 @@ int write_all_supers(struct btrfs_root *root, int max_mirrors) if (ret) total_errors++; } - rcu_read_unlock(); + mutex_unlock(&root->fs_info->fs_devices->device_list_mutex); if (total_errors > max_errors) { printk(KERN_ERR "btrfs: %d errors while writing supers\n", total_errors); -- cgit v1.2.3 From ea02c63d57d7ec099f66ddb2942b4022e865cd5f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 May 2011 21:56:16 +0800 Subject: ASoC: Fix wm_hubs input PGA ZC bits Signed-off-by: Mark Brown Acked-by: Liam Girdwood --- sound/soc/codecs/wm_hubs.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index e55b298c14a0..9e370d14ad88 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -215,23 +215,23 @@ static const struct snd_kcontrol_new analogue_snd_controls[] = { SOC_SINGLE_TLV("IN1L Volume", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 0, 31, 0, inpga_tlv), SOC_SINGLE("IN1L Switch", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 7, 1, 1), -SOC_SINGLE("IN1L ZC Switch", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 7, 1, 0), +SOC_SINGLE("IN1L ZC Switch", WM8993_LEFT_LINE_INPUT_1_2_VOLUME, 6, 1, 0), SOC_SINGLE_TLV("IN1R Volume", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 0, 31, 0, inpga_tlv), SOC_SINGLE("IN1R Switch", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 7, 1, 1), -SOC_SINGLE("IN1R ZC Switch", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 7, 1, 0), +SOC_SINGLE("IN1R ZC Switch", WM8993_RIGHT_LINE_INPUT_1_2_VOLUME, 6, 1, 0), SOC_SINGLE_TLV("IN2L Volume", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 0, 31, 0, inpga_tlv), SOC_SINGLE("IN2L Switch", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 7, 1, 1), -SOC_SINGLE("IN2L ZC Switch", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 7, 1, 0), +SOC_SINGLE("IN2L ZC Switch", WM8993_LEFT_LINE_INPUT_3_4_VOLUME, 6, 1, 0), SOC_SINGLE_TLV("IN2R Volume", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 0, 31, 0, inpga_tlv), SOC_SINGLE("IN2R Switch", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 7, 1, 1), -SOC_SINGLE("IN2R ZC Switch", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 7, 1, 0), +SOC_SINGLE("IN2R ZC Switch", WM8993_RIGHT_LINE_INPUT_3_4_VOLUME, 6, 1, 0), SOC_SINGLE_TLV("MIXINL IN2L Volume", WM8993_INPUT_MIXER3, 7, 1, 0, inmix_sw_tlv), -- cgit v1.2.3 From f133ecca9cbb31b5e6e9bda27cbe3034fbf656df Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 26 May 2011 12:40:09 -0400 Subject: arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann Signed-off-by: Chris Metcalf --- arch/tile/Kconfig | 1 + arch/tile/include/asm/hardwall.h | 15 +++- arch/tile/kernel/Makefile | 2 +- arch/tile/kernel/hardwall.c | 90 ++++++++++++++----- arch/tile/kernel/proc.c | 73 +++++++++++++++ arch/tile/kernel/sysfs.c | 185 +++++++++++++++++++++++++++++++++++++++ fs/proc/base.c | 9 ++ 7 files changed, 347 insertions(+), 28 deletions(-) create mode 100644 arch/tile/kernel/sysfs.c diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 635e1bfb1c5d..3f7d63c7ae85 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -12,6 +12,7 @@ config TILE select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP select GENERIC_IRQ_SHOW + select SYS_HYPERVISOR # FIXME: investigate whether we need/want these options. # select HAVE_IOREMAP_PROT diff --git a/arch/tile/include/asm/hardwall.h b/arch/tile/include/asm/hardwall.h index 0bed3ec7b42c..2ac422848c7d 100644 --- a/arch/tile/include/asm/hardwall.h +++ b/arch/tile/include/asm/hardwall.h @@ -40,6 +40,10 @@ #define HARDWALL_DEACTIVATE \ _IO(HARDWALL_IOCTL_BASE, _HARDWALL_DEACTIVATE) +#define _HARDWALL_GET_ID 4 +#define HARDWALL_GET_ID \ + _IO(HARDWALL_IOCTL_BASE, _HARDWALL_GET_ID) + #ifndef __KERNEL__ /* This is the canonical name expected by userspace. */ @@ -47,9 +51,14 @@ #else -/* Hook for /proc/tile/hardwall. */ -struct seq_file; -int proc_tile_hardwall_show(struct seq_file *sf, void *v); +/* /proc hooks for hardwall. */ +struct proc_dir_entry; +#ifdef CONFIG_HARDWALL +void proc_tile_hardwall_init(struct proc_dir_entry *root); +int proc_pid_hardwall(struct task_struct *task, char *buffer); +#else +static inline void proc_tile_hardwall_init(struct proc_dir_entry *root) {} +#endif #endif diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile index b4c8e8ec45dc..b4dbc057baad 100644 --- a/arch/tile/kernel/Makefile +++ b/arch/tile/kernel/Makefile @@ -5,7 +5,7 @@ extra-y := vmlinux.lds head_$(BITS).o obj-y := backtrace.o entry.o init_task.o irq.o messaging.o \ pci-dma.o proc.o process.o ptrace.o reboot.o \ - setup.o signal.o single_step.o stack.o sys.o time.o traps.o \ + setup.o signal.o single_step.o stack.o sys.o sysfs.o time.o traps.o \ intvec_$(BITS).o regs_$(BITS).o tile-desc_$(BITS).o obj-$(CONFIG_HARDWALL) += hardwall.o diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c index 3bddef710de4..8c41891aab34 100644 --- a/arch/tile/kernel/hardwall.c +++ b/arch/tile/kernel/hardwall.c @@ -40,16 +40,25 @@ struct hardwall_info { struct list_head list; /* "rectangles" list */ struct list_head task_head; /* head of tasks in this hardwall */ + struct cpumask cpumask; /* cpus in the rectangle */ int ulhc_x; /* upper left hand corner x coord */ int ulhc_y; /* upper left hand corner y coord */ int width; /* rectangle width */ int height; /* rectangle height */ + int id; /* integer id for this hardwall */ int teardown_in_progress; /* are we tearing this one down? */ }; /* Currently allocated hardwall rectangles */ static LIST_HEAD(rectangles); +/* /proc/tile/hardwall */ +static struct proc_dir_entry *hardwall_proc_dir; + +/* Functions to manage files in /proc/tile/hardwall. */ +static void hardwall_add_proc(struct hardwall_info *rect); +static void hardwall_remove_proc(struct hardwall_info *rect); + /* * Guard changes to the hardwall data structures. * This could be finer grained (e.g. one lock for the list of hardwall @@ -105,6 +114,8 @@ static int setup_rectangle(struct hardwall_info *r, struct cpumask *mask) r->ulhc_y = cpu_y(ulhc); r->width = cpu_x(lrhc) - r->ulhc_x + 1; r->height = cpu_y(lrhc) - r->ulhc_y + 1; + cpumask_copy(&r->cpumask, mask); + r->id = ulhc; /* The ulhc cpu id can be the hardwall id. */ /* Width and height must be positive */ if (r->width <= 0 || r->height <= 0) @@ -388,6 +399,9 @@ static struct hardwall_info *hardwall_create( /* Set up appropriate hardwalling on all affected cpus. */ hardwall_setup(rect); + /* Create a /proc/tile/hardwall entry. */ + hardwall_add_proc(rect); + return rect; } @@ -645,6 +659,9 @@ static void hardwall_destroy(struct hardwall_info *rect) /* Restart switch and disable firewall. */ on_each_cpu_mask(&mask, restart_udn_switch, NULL, 1); + /* Remove the /proc/tile/hardwall entry. */ + hardwall_remove_proc(rect); + /* Now free the rectangle from the list. */ spin_lock_irqsave(&hardwall_lock, flags); BUG_ON(!list_empty(&rect->task_head)); @@ -654,35 +671,57 @@ static void hardwall_destroy(struct hardwall_info *rect) } -/* - * Dump hardwall state via /proc; initialized in arch/tile/sys/proc.c. - */ -int proc_tile_hardwall_show(struct seq_file *sf, void *v) +static int hardwall_proc_show(struct seq_file *sf, void *v) { - struct hardwall_info *r; + struct hardwall_info *rect = sf->private; + char buf[256]; - if (udn_disabled) { - seq_printf(sf, "%dx%d 0,0 pids:\n", smp_width, smp_height); - return 0; - } - - spin_lock_irq(&hardwall_lock); - list_for_each_entry(r, &rectangles, list) { - struct task_struct *p; - seq_printf(sf, "%dx%d %d,%d pids:", - r->width, r->height, r->ulhc_x, r->ulhc_y); - list_for_each_entry(p, &r->task_head, thread.hardwall_list) { - unsigned int cpu = cpumask_first(&p->cpus_allowed); - unsigned int x = cpu % smp_width; - unsigned int y = cpu / smp_width; - seq_printf(sf, " %d@%d,%d", p->pid, x, y); - } - seq_printf(sf, "\n"); - } - spin_unlock_irq(&hardwall_lock); + int rc = cpulist_scnprintf(buf, sizeof(buf), &rect->cpumask); + buf[rc++] = '\n'; + seq_write(sf, buf, rc); return 0; } +static int hardwall_proc_open(struct inode *inode, + struct file *file) +{ + return single_open(file, hardwall_proc_show, PDE(inode)->data); +} + +static const struct file_operations hardwall_proc_fops = { + .open = hardwall_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void hardwall_add_proc(struct hardwall_info *rect) +{ + char buf[64]; + snprintf(buf, sizeof(buf), "%d", rect->id); + proc_create_data(buf, 0444, hardwall_proc_dir, + &hardwall_proc_fops, rect); +} + +static void hardwall_remove_proc(struct hardwall_info *rect) +{ + char buf[64]; + snprintf(buf, sizeof(buf), "%d", rect->id); + remove_proc_entry(buf, hardwall_proc_dir); +} + +int proc_pid_hardwall(struct task_struct *task, char *buffer) +{ + struct hardwall_info *rect = task->thread.hardwall; + return rect ? sprintf(buffer, "%d\n", rect->id) : 0; +} + +void proc_tile_hardwall_init(struct proc_dir_entry *root) +{ + if (!udn_disabled) + hardwall_proc_dir = proc_mkdir("hardwall", root); +} + /* * Character device support via ioctl/close. @@ -716,6 +755,9 @@ static long hardwall_ioctl(struct file *file, unsigned int a, unsigned long b) return -EINVAL; return hardwall_deactivate(current); + case _HARDWALL_GET_ID: + return rect ? rect->id : -EINVAL; + default: return -EINVAL; } diff --git a/arch/tile/kernel/proc.c b/arch/tile/kernel/proc.c index 2e02c41ddf3b..62d820833c68 100644 --- a/arch/tile/kernel/proc.c +++ b/arch/tile/kernel/proc.c @@ -27,6 +27,7 @@ #include #include #include +#include #include @@ -88,3 +89,75 @@ const struct seq_operations cpuinfo_op = { .stop = c_stop, .show = show_cpuinfo, }; + +/* + * Support /proc/tile directory + */ + +static int __init proc_tile_init(void) +{ + struct proc_dir_entry *root = proc_mkdir("tile", NULL); + if (root == NULL) + return 0; + + proc_tile_hardwall_init(root); + + return 0; +} + +arch_initcall(proc_tile_init); + +/* + * Support /proc/sys/tile directory + */ + +#ifndef __tilegx__ /* FIXME: GX: no support for unaligned access yet */ +static ctl_table unaligned_subtable[] = { + { + .procname = "enabled", + .data = &unaligned_fixup, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, + { + .procname = "printk", + .data = &unaligned_printk, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, + { + .procname = "count", + .data = &unaligned_fixup_count, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, + {} +}; + +static ctl_table unaligned_table[] = { + { + .procname = "unaligned_fixup", + .mode = 0555, + .child = unaligned_subtable + }, + {} +}; +#endif + +static struct ctl_path tile_path[] = { + { .procname = "tile" }, + { } +}; + +static int __init proc_sys_tile_init(void) +{ +#ifndef __tilegx__ /* FIXME: GX: no support for unaligned access yet */ + register_sysctl_paths(tile_path, unaligned_table); +#endif + return 0; +} + +arch_initcall(proc_sys_tile_init); diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c new file mode 100644 index 000000000000..b671a86f4515 --- /dev/null +++ b/arch/tile/kernel/sysfs.c @@ -0,0 +1,185 @@ +/* + * Copyright 2011 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * /sys entry support. + */ + +#include +#include +#include +#include +#include + +/* Return a string queried from the hypervisor, truncated to page size. */ +static ssize_t get_hv_confstr(char *page, int query) +{ + ssize_t n = hv_confstr(query, (unsigned long)page, PAGE_SIZE - 1); + n = n < 0 ? 0 : min(n, (ssize_t)PAGE_SIZE - 1) - 1; + if (n) + page[n++] = '\n'; + page[n] = '\0'; + return n; +} + +static ssize_t chip_width_show(struct sysdev_class *dev, + struct sysdev_class_attribute *attr, + char *page) +{ + return sprintf(page, "%u\n", smp_width); +} +static SYSDEV_CLASS_ATTR(chip_width, 0444, chip_width_show, NULL); + +static ssize_t chip_height_show(struct sysdev_class *dev, + struct sysdev_class_attribute *attr, + char *page) +{ + return sprintf(page, "%u\n", smp_height); +} +static SYSDEV_CLASS_ATTR(chip_height, 0444, chip_height_show, NULL); + +static ssize_t chip_serial_show(struct sysdev_class *dev, + struct sysdev_class_attribute *attr, + char *page) +{ + return get_hv_confstr(page, HV_CONFSTR_CHIP_SERIAL_NUM); +} +static SYSDEV_CLASS_ATTR(chip_serial, 0444, chip_serial_show, NULL); + +static ssize_t chip_revision_show(struct sysdev_class *dev, + struct sysdev_class_attribute *attr, + char *page) +{ + return get_hv_confstr(page, HV_CONFSTR_CHIP_REV); +} +static SYSDEV_CLASS_ATTR(chip_revision, 0444, chip_revision_show, NULL); + + +static ssize_t type_show(struct sysdev_class *dev, + struct sysdev_class_attribute *attr, + char *page) +{ + return sprintf(page, "tilera\n"); +} +static SYSDEV_CLASS_ATTR(type, 0444, type_show, NULL); + +#define HV_CONF_ATTR(name, conf) \ + static ssize_t name ## _show(struct sysdev_class *dev, \ + struct sysdev_class_attribute *attr, \ + char *page) \ + { \ + return get_hv_confstr(page, conf); \ + } \ + static SYSDEV_CLASS_ATTR(name, 0444, name ## _show, NULL); + +HV_CONF_ATTR(version, HV_CONFSTR_HV_SW_VER) +HV_CONF_ATTR(config_version, HV_CONFSTR_HV_CONFIG_VER) + +HV_CONF_ATTR(board_part, HV_CONFSTR_BOARD_PART_NUM) +HV_CONF_ATTR(board_serial, HV_CONFSTR_BOARD_SERIAL_NUM) +HV_CONF_ATTR(board_revision, HV_CONFSTR_BOARD_REV) +HV_CONF_ATTR(board_description, HV_CONFSTR_BOARD_DESC) +HV_CONF_ATTR(mezz_part, HV_CONFSTR_MEZZ_PART_NUM) +HV_CONF_ATTR(mezz_serial, HV_CONFSTR_MEZZ_SERIAL_NUM) +HV_CONF_ATTR(mezz_revision, HV_CONFSTR_MEZZ_REV) +HV_CONF_ATTR(mezz_description, HV_CONFSTR_MEZZ_DESC) +HV_CONF_ATTR(switch_control, HV_CONFSTR_SWITCH_CONTROL) + +static struct attribute *board_attrs[] = { + &attr_board_part.attr, + &attr_board_serial.attr, + &attr_board_revision.attr, + &attr_board_description.attr, + &attr_mezz_part.attr, + &attr_mezz_serial.attr, + &attr_mezz_revision.attr, + &attr_mezz_description.attr, + &attr_switch_control.attr, + NULL +}; + +static struct attribute_group board_attr_group = { + .name = "board", + .attrs = board_attrs, +}; + + +static struct bin_attribute hvconfig_bin; + +static ssize_t +hvconfig_bin_read(struct file *filp, struct kobject *kobj, + struct bin_attribute *bin_attr, + char *buf, loff_t off, size_t count) +{ + static size_t size; + + /* Lazily learn the true size (minus the trailing NUL). */ + if (size == 0) + size = hv_confstr(HV_CONFSTR_HV_CONFIG, 0, 0) - 1; + + /* Check and adjust input parameters. */ + if (off > size) + return -EINVAL; + if (count > size - off) + count = size - off; + + if (count) { + /* Get a copy of the hvc and copy out the relevant portion. */ + char *hvc; + + size = off + count; + hvc = kmalloc(size, GFP_KERNEL); + if (hvc == NULL) + return -ENOMEM; + hv_confstr(HV_CONFSTR_HV_CONFIG, (unsigned long)hvc, size); + memcpy(buf, hvc + off, count); + kfree(hvc); + } + + return count; +} + +static int __init create_sysfs_entries(void) +{ + struct sysdev_class *cls = &cpu_sysdev_class; + int err = 0; + +#define create_cpu_attr(name) \ + if (!err) \ + err = sysfs_create_file(&cls->kset.kobj, &attr_##name.attr); + create_cpu_attr(chip_width); + create_cpu_attr(chip_height); + create_cpu_attr(chip_serial); + create_cpu_attr(chip_revision); + +#define create_hv_attr(name) \ + if (!err) \ + err = sysfs_create_file(hypervisor_kobj, &attr_##name.attr); + create_hv_attr(type); + create_hv_attr(version); + create_hv_attr(config_version); + + if (!err) + err = sysfs_create_group(hypervisor_kobj, &board_attr_group); + + if (!err) { + sysfs_bin_attr_init(&hvconfig_bin); + hvconfig_bin.attr.name = "hvconfig"; + hvconfig_bin.attr.mode = S_IRUGO; + hvconfig_bin.read = hvconfig_bin_read; + hvconfig_bin.size = PAGE_SIZE; + err = sysfs_create_bin_file(hypervisor_kobj, &hvconfig_bin); + } + + return err; +} +subsys_initcall(create_sysfs_entries); diff --git a/fs/proc/base.c b/fs/proc/base.c index dfa532730e55..3ad615fb8656 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -83,6 +83,9 @@ #include #include #include +#ifdef CONFIG_HARDWALL +#include +#endif #include "internal.h" /* NOTE: @@ -2894,6 +2897,9 @@ static const struct pid_entry tgid_base_stuff[] = { #ifdef CONFIG_TASK_IO_ACCOUNTING INF("io", S_IRUGO, proc_tgid_io_accounting), #endif +#ifdef CONFIG_HARDWALL + INF("hardwall", S_IRUGO, proc_pid_hardwall), +#endif }; static int proc_tgid_base_readdir(struct file * filp, @@ -3232,6 +3238,9 @@ static const struct pid_entry tid_base_stuff[] = { #ifdef CONFIG_TASK_IO_ACCOUNTING INF("io", S_IRUGO, proc_tid_io_accounting), #endif +#ifdef CONFIG_HARDWALL + INF("hardwall", S_IRUGO, proc_pid_hardwall), +#endif }; static int proc_tid_base_readdir(struct file * filp, -- cgit v1.2.3 From 383c55350fb4ab6bd08abfab82038ae0364f1f48 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 27 May 2011 15:19:12 +0000 Subject: [CIFS] Fix endian error comparing authusers when cifsacl enabled Fix sparse warning: CHECK fs/cifs/cifsacl.c fs/cifs/cifsacl.c:41:36: warning: incorrect type in initializer (different base types) fs/cifs/cifsacl.c:41:36: expected restricted __le32 fs/cifs/cifsacl.c:41:36: got int fs/cifs/cifsacl.c:461:52: warning: restricted __le32 degrades to integer fs/cifs/cifsacl.c:461:73: warning: restricted __le32 degrades to integer The second one looks harmless but the first one (sid_authusers) was added in commit 2fbc2f1729e785a7b2faf9d8d60926bb1ff62af0 and only affects 2.6.38/2.6.39 CC: Stable Reviewed-and-Tested-by: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/cifsacl.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index 076b69ceef7f..5f02b4ee9a03 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -38,7 +38,7 @@ static const struct cifs_sid sid_everyone = { 1, 1, {0, 0, 0, 0, 0, 1}, {0} }; /* security id for Authenticated Users system group */ static const struct cifs_sid sid_authusers = { - 1, 1, {0, 0, 0, 0, 0, 5}, {11} }; + 1, 1, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(11)} }; /* group users */ static const struct cifs_sid sid_user = {1, 2 , {0, 0, 0, 0, 0, 5}, {} }; @@ -458,7 +458,8 @@ int compare_sids(const struct cifs_sid *ctsid, const struct cifs_sid *cwsid) if (num_subauth) { for (i = 0; i < num_subauth; ++i) { if (ctsid->sub_auth[i] != cwsid->sub_auth[i]) { - if (ctsid->sub_auth[i] > cwsid->sub_auth[i]) + if (le32_to_cpu(ctsid->sub_auth[i]) > + le32_to_cpu(cwsid->sub_auth[i])) return 1; else return -1; -- cgit v1.2.3 From 5ee1a81b84ee8b0bd0b4f8cdbac48b472863c1f2 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 20 Apr 2011 15:44:11 -0700 Subject: GPIO: OMAP: move register offset defines into Register offset defines are moved to so they can be used by SoC-specific device init code to fill out platform_data register offsets. Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/gpio.c | 103 --------------------------------- arch/arm/plat-omap/include/plat/gpio.h | 103 +++++++++++++++++++++++++++++++++ 2 files changed, 103 insertions(+), 103 deletions(-) diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index efb869390199..44acabd5f530 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -30,109 +30,6 @@ #include #include -/* - * OMAP1510 GPIO registers - */ -#define OMAP1510_GPIO_DATA_INPUT 0x00 -#define OMAP1510_GPIO_DATA_OUTPUT 0x04 -#define OMAP1510_GPIO_DIR_CONTROL 0x08 -#define OMAP1510_GPIO_INT_CONTROL 0x0c -#define OMAP1510_GPIO_INT_MASK 0x10 -#define OMAP1510_GPIO_INT_STATUS 0x14 -#define OMAP1510_GPIO_PIN_CONTROL 0x18 - -#define OMAP1510_IH_GPIO_BASE 64 - -/* - * OMAP1610 specific GPIO registers - */ -#define OMAP1610_GPIO_REVISION 0x0000 -#define OMAP1610_GPIO_SYSCONFIG 0x0010 -#define OMAP1610_GPIO_SYSSTATUS 0x0014 -#define OMAP1610_GPIO_IRQSTATUS1 0x0018 -#define OMAP1610_GPIO_IRQENABLE1 0x001c -#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 -#define OMAP1610_GPIO_DATAIN 0x002c -#define OMAP1610_GPIO_DATAOUT 0x0030 -#define OMAP1610_GPIO_DIRECTION 0x0034 -#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 -#define OMAP1610_GPIO_EDGE_CTRL2 0x003c -#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c -#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 -#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 -#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc -#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 -#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 - -/* - * OMAP7XX specific GPIO registers - */ -#define OMAP7XX_GPIO_DATA_INPUT 0x00 -#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 -#define OMAP7XX_GPIO_DIR_CONTROL 0x08 -#define OMAP7XX_GPIO_INT_CONTROL 0x0c -#define OMAP7XX_GPIO_INT_MASK 0x10 -#define OMAP7XX_GPIO_INT_STATUS 0x14 - -/* - * omap2+ specific GPIO registers - */ -#define OMAP24XX_GPIO_REVISION 0x0000 -#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 -#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 -#define OMAP24XX_GPIO_IRQENABLE2 0x002c -#define OMAP24XX_GPIO_IRQENABLE1 0x001c -#define OMAP24XX_GPIO_WAKE_EN 0x0020 -#define OMAP24XX_GPIO_CTRL 0x0030 -#define OMAP24XX_GPIO_OE 0x0034 -#define OMAP24XX_GPIO_DATAIN 0x0038 -#define OMAP24XX_GPIO_DATAOUT 0x003c -#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 -#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 -#define OMAP24XX_GPIO_RISINGDETECT 0x0048 -#define OMAP24XX_GPIO_FALLINGDETECT 0x004c -#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 -#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 -#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 -#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 -#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 -#define OMAP24XX_GPIO_SETWKUENA 0x0084 -#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 -#define OMAP24XX_GPIO_SETDATAOUT 0x0094 - -#define OMAP4_GPIO_REVISION 0x0000 -#define OMAP4_GPIO_EOI 0x0020 -#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 -#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 -#define OMAP4_GPIO_IRQSTATUS0 0x002c -#define OMAP4_GPIO_IRQSTATUS1 0x0030 -#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 -#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 -#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c -#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 -#define OMAP4_GPIO_IRQWAKEN0 0x0044 -#define OMAP4_GPIO_IRQWAKEN1 0x0048 -#define OMAP4_GPIO_IRQENABLE1 0x011c -#define OMAP4_GPIO_WAKE_EN 0x0120 -#define OMAP4_GPIO_IRQSTATUS2 0x0128 -#define OMAP4_GPIO_IRQENABLE2 0x012c -#define OMAP4_GPIO_CTRL 0x0130 -#define OMAP4_GPIO_OE 0x0134 -#define OMAP4_GPIO_DATAIN 0x0138 -#define OMAP4_GPIO_DATAOUT 0x013c -#define OMAP4_GPIO_LEVELDETECT0 0x0140 -#define OMAP4_GPIO_LEVELDETECT1 0x0144 -#define OMAP4_GPIO_RISINGDETECT 0x0148 -#define OMAP4_GPIO_FALLINGDETECT 0x014c -#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 -#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 -#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 -#define OMAP4_GPIO_SETIRQENABLE1 0x0164 -#define OMAP4_GPIO_CLEARWKUENA 0x0180 -#define OMAP4_GPIO_SETWKUENA 0x0184 -#define OMAP4_GPIO_CLEARDATAOUT 0x0190 -#define OMAP4_GPIO_SETDATAOUT 0x0194 - struct gpio_bank { unsigned long pbase; void __iomem *base; diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index cac2e8ac6968..ec97e00cb581 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -52,6 +52,109 @@ #define OMAP34XX_NR_GPIOS 6 +/* + * OMAP1510 GPIO registers + */ +#define OMAP1510_GPIO_DATA_INPUT 0x00 +#define OMAP1510_GPIO_DATA_OUTPUT 0x04 +#define OMAP1510_GPIO_DIR_CONTROL 0x08 +#define OMAP1510_GPIO_INT_CONTROL 0x0c +#define OMAP1510_GPIO_INT_MASK 0x10 +#define OMAP1510_GPIO_INT_STATUS 0x14 +#define OMAP1510_GPIO_PIN_CONTROL 0x18 + +#define OMAP1510_IH_GPIO_BASE 64 + +/* + * OMAP1610 specific GPIO registers + */ +#define OMAP1610_GPIO_REVISION 0x0000 +#define OMAP1610_GPIO_SYSCONFIG 0x0010 +#define OMAP1610_GPIO_SYSSTATUS 0x0014 +#define OMAP1610_GPIO_IRQSTATUS1 0x0018 +#define OMAP1610_GPIO_IRQENABLE1 0x001c +#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 +#define OMAP1610_GPIO_DATAIN 0x002c +#define OMAP1610_GPIO_DATAOUT 0x0030 +#define OMAP1610_GPIO_DIRECTION 0x0034 +#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 +#define OMAP1610_GPIO_EDGE_CTRL2 0x003c +#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c +#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 +#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 +#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc +#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 +#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 + +/* + * OMAP7XX specific GPIO registers + */ +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 + +/* + * omap2+ specific GPIO registers + */ +#define OMAP24XX_GPIO_REVISION 0x0000 +#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 +#define OMAP24XX_GPIO_IRQENABLE2 0x002c +#define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_WAKE_EN 0x0020 +#define OMAP24XX_GPIO_CTRL 0x0030 +#define OMAP24XX_GPIO_OE 0x0034 +#define OMAP24XX_GPIO_DATAIN 0x0038 +#define OMAP24XX_GPIO_DATAOUT 0x003c +#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 +#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 +#define OMAP24XX_GPIO_RISINGDETECT 0x0048 +#define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 +#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 +#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 +#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 +#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 +#define OMAP24XX_GPIO_SETWKUENA 0x0084 +#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 +#define OMAP24XX_GPIO_SETDATAOUT 0x0094 + +#define OMAP4_GPIO_REVISION 0x0000 +#define OMAP4_GPIO_EOI 0x0020 +#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 +#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 +#define OMAP4_GPIO_IRQSTATUS0 0x002c +#define OMAP4_GPIO_IRQSTATUS1 0x0030 +#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 +#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 +#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c +#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 +#define OMAP4_GPIO_IRQWAKEN0 0x0044 +#define OMAP4_GPIO_IRQWAKEN1 0x0048 +#define OMAP4_GPIO_IRQENABLE1 0x011c +#define OMAP4_GPIO_WAKE_EN 0x0120 +#define OMAP4_GPIO_IRQSTATUS2 0x0128 +#define OMAP4_GPIO_IRQENABLE2 0x012c +#define OMAP4_GPIO_CTRL 0x0130 +#define OMAP4_GPIO_OE 0x0134 +#define OMAP4_GPIO_DATAIN 0x0138 +#define OMAP4_GPIO_DATAOUT 0x013c +#define OMAP4_GPIO_LEVELDETECT0 0x0140 +#define OMAP4_GPIO_LEVELDETECT1 0x0144 +#define OMAP4_GPIO_RISINGDETECT 0x0148 +#define OMAP4_GPIO_FALLINGDETECT 0x014c +#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 +#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 +#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 +#define OMAP4_GPIO_SETIRQENABLE1 0x0164 +#define OMAP4_GPIO_CLEARWKUENA 0x0180 +#define OMAP4_GPIO_SETWKUENA 0x0184 +#define OMAP4_GPIO_CLEARDATAOUT 0x0190 +#define OMAP4_GPIO_SETDATAOUT 0x0194 + #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) -- cgit v1.2.3 From e5cdb13ff95e1400bc94d3e6610fc5e95be3b5b1 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 20 May 2011 11:53:37 +0200 Subject: GPIO: OMAP: move to drivers/gpio Move OMAP GPIO driver to drivers/gpio. Builds whenever CONFIG_ARCH_OMAP=y. Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/Makefile | 2 +- arch/arm/plat-omap/gpio.c | 2009 ------------------------------------------- drivers/gpio/Makefile | 1 + drivers/gpio/gpio-omap.c | 2007 ++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 2009 insertions(+), 2010 deletions(-) delete mode 100644 arch/arm/plat-omap/gpio.c create mode 100644 drivers/gpio/gpio-omap.c diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index a4a12859fdd5..f0233e6abcdf 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \ +obj-y := common.o sram.o clock.o devices.o dma.o mux.o \ usb.o fb.o io.o counter_32k.o obj-m := obj-n := diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c deleted file mode 100644 index 44acabd5f530..000000000000 --- a/arch/arm/plat-omap/gpio.c +++ /dev/null @@ -1,2009 +0,0 @@ -/* - * linux/arch/arm/plat-omap/gpio.c - * - * Support functions for OMAP GPIO - * - * Copyright (C) 2003-2005 Nokia Corporation - * Written by Juha Yrjölä - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -struct gpio_bank { - unsigned long pbase; - void __iomem *base; - u16 irq; - u16 virtual_irq_start; - int method; -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - u32 suspend_wakeup; - u32 saved_wakeup; -#endif - u32 non_wakeup_gpios; - u32 enabled_non_wakeup_gpios; - - u32 saved_datain; - u32 saved_fallingdetect; - u32 saved_risingdetect; - u32 level_mask; - u32 toggle_mask; - spinlock_t lock; - struct gpio_chip chip; - struct clk *dbck; - u32 mod_usage; - u32 dbck_enable_mask; - struct device *dev; - bool dbck_flag; - int stride; -}; - -#ifdef CONFIG_ARCH_OMAP3 -struct omap3_gpio_regs { - u32 irqenable1; - u32 irqenable2; - u32 wake_en; - u32 ctrl; - u32 oe; - u32 leveldetect0; - u32 leveldetect1; - u32 risingdetect; - u32 fallingdetect; - u32 dataout; -}; - -static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; -#endif - -/* - * TODO: Cleanup gpio_bank usage as it is having information - * related to all instances of the device - */ -static struct gpio_bank *gpio_bank; - -static int bank_width; - -/* TODO: Analyze removing gpio_bank_count usage from driver code */ -int gpio_bank_count; - -static inline struct gpio_bank *get_gpio_bank(int gpio) -{ - if (cpu_is_omap15xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1]; - } - if (cpu_is_omap16xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1 + (gpio >> 4)]; - } - if (cpu_is_omap7xx()) { - if (OMAP_GPIO_IS_MPUIO(gpio)) - return &gpio_bank[0]; - return &gpio_bank[1 + (gpio >> 5)]; - } - if (cpu_is_omap24xx()) - return &gpio_bank[gpio >> 5]; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - return &gpio_bank[gpio >> 5]; - BUG(); - return NULL; -} - -static inline int get_gpio_index(int gpio) -{ - if (cpu_is_omap7xx()) - return gpio & 0x1f; - if (cpu_is_omap24xx()) - return gpio & 0x1f; - if (cpu_is_omap34xx() || cpu_is_omap44xx()) - return gpio & 0x1f; - return gpio & 0x0f; -} - -static inline int gpio_valid(int gpio) -{ - if (gpio < 0) - return -1; - if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) { - if (gpio >= OMAP_MAX_GPIO_LINES + 16) - return -1; - return 0; - } - if (cpu_is_omap15xx() && gpio < 16) - return 0; - if ((cpu_is_omap16xx()) && gpio < 64) - return 0; - if (cpu_is_omap7xx() && gpio < 192) - return 0; - if (cpu_is_omap2420() && gpio < 128) - return 0; - if (cpu_is_omap2430() && gpio < 160) - return 0; - if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192) - return 0; - return -1; -} - -static int check_gpio(int gpio) -{ - if (unlikely(gpio_valid(gpio) < 0)) { - printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); - dump_stack(); - return -1; - } - return 0; -} - -static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) -{ - void __iomem *reg = bank->base; - u32 l; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DIR_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_OE; - break; -#endif - default: - WARN_ON(1); - return; - } - l = __raw_readl(reg); - if (is_input) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - __raw_writel(l, reg); -} - -static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT / bank->stride; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (enable) - reg += OMAP1610_GPIO_SET_DATAOUT; - else - reg += OMAP1610_GPIO_CLEAR_DATAOUT; - l = 1 << gpio; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP24XX_GPIO_SETDATAOUT; - else - reg += OMAP24XX_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - if (enable) - reg += OMAP4_GPIO_SETDATAOUT; - else - reg += OMAP4_GPIO_CLEARDATAOUT; - l = 1 << gpio; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(l, reg); -} - -static int _get_gpio_datain(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg; - - if (check_gpio(gpio) < 0) - return -EINVAL; - reg = bank->base; - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_INPUT_LATCH / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_INPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DATAIN; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_INPUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_DATAIN; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_DATAIN; - break; -#endif - default: - return -EINVAL; - } - return (__raw_readl(reg) - & (1 << get_gpio_index(gpio))) != 0; -} - -static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg; - - if (check_gpio(gpio) < 0) - return -EINVAL; - reg = bank->base; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_OUTPUT / bank->stride; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DATA_OUTPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DATAOUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DATA_OUTPUT; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_DATAOUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_DATAOUT; - break; -#endif - default: - return -EINVAL; - } - - return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; -} - -#define MOD_REG_BIT(reg, bit_mask, set) \ -do { \ - int l = __raw_readl(base + reg); \ - if (set) l |= bit_mask; \ - else l &= ~bit_mask; \ - __raw_writel(l, base + reg); \ -} while(0) - -/** - * _set_gpio_debounce - low level gpio debounce time - * @bank: the gpio bank we're acting upon - * @gpio: the gpio number on this @gpio - * @debounce: debounce time to use - * - * OMAP's debounce time is in 31us steps so we need - * to convert and round up to the closest unit. - */ -static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, - unsigned debounce) -{ - void __iomem *reg = bank->base; - u32 val; - u32 l; - - if (!bank->dbck_flag) - return; - - if (debounce < 32) - debounce = 0x01; - else if (debounce > 7936) - debounce = 0xff; - else - debounce = (debounce / 0x1f) - 1; - - l = 1 << get_gpio_index(gpio); - - if (bank->method == METHOD_GPIO_44XX) - reg += OMAP4_GPIO_DEBOUNCINGTIME; - else - reg += OMAP24XX_GPIO_DEBOUNCE_VAL; - - __raw_writel(debounce, reg); - - reg = bank->base; - if (bank->method == METHOD_GPIO_44XX) - reg += OMAP4_GPIO_DEBOUNCENABLE; - else - reg += OMAP24XX_GPIO_DEBOUNCE_EN; - - val = __raw_readl(reg); - - if (debounce) { - val |= l; - clk_enable(bank->dbck); - } else { - val &= ~l; - clk_disable(bank->dbck); - } - bank->dbck_enable_mask = val; - - __raw_writel(val, reg); -} - -#ifdef CONFIG_ARCH_OMAP2PLUS -static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, - int trigger) -{ - void __iomem *base = bank->base; - u32 gpio_bit = 1 << gpio; - u32 val; - - if (cpu_is_omap44xx()) { - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } else { - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - } - if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { - if (cpu_is_omap44xx()) { - if (trigger != 0) - __raw_writel(1 << gpio, bank->base+ - OMAP4_GPIO_IRQWAKEN0); - else { - val = __raw_readl(bank->base + - OMAP4_GPIO_IRQWAKEN0); - __raw_writel(val & (~(1 << gpio)), bank->base + - OMAP4_GPIO_IRQWAKEN0); - } - } else { - /* - * GPIO wakeup request can only be generated on edge - * transitions - */ - if (trigger & IRQ_TYPE_EDGE_BOTH) - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_SETWKUENA); - else - __raw_writel(1 << gpio, bank->base - + OMAP24XX_GPIO_CLEARWKUENA); - } - } - /* This part needs to be executed always for OMAP34xx */ - if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { - /* - * Log the edge gpio and manually trigger the IRQ - * after resume if the input level changes - * to avoid irq lost during PER RET/OFF mode - * Applies for omap2 non-wakeup gpio and all omap3 gpios - */ - if (trigger & IRQ_TYPE_EDGE_BOTH) - bank->enabled_non_wakeup_gpios |= gpio_bit; - else - bank->enabled_non_wakeup_gpios &= ~gpio_bit; - } - - if (cpu_is_omap44xx()) { - bank->level_mask = - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); - } else { - bank->level_mask = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - } -} -#endif - -#ifdef CONFIG_ARCH_OMAP1 -/* - * This only applies to chips that can't do both rising and falling edge - * detection at once. For all other chips, this function is a noop. - */ -static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; - break; -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - break; -#endif - default: - return; - } - - l = __raw_readl(reg); - if ((l >> gpio) & 1) - l &= ~(1 << gpio); - else - l |= 1 << gpio; - - __raw_writel(l, reg); -} -#endif - -static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) -{ - void __iomem *reg = bank->base; - u32 l = 0; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (gpio & 0x08) - reg += OMAP1610_GPIO_EDGE_CTRL2; - else - reg += OMAP1610_GPIO_EDGE_CTRL1; - gpio &= 0x07; - l = __raw_readl(reg); - l &= ~(3 << (gpio << 1)); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 2 << (gpio << 1); - if (trigger & IRQ_TYPE_EDGE_FALLING) - l |= 1 << (gpio << 1); - if (trigger) - /* Enable wake-up during idle for dynamic tick */ - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA); - else - __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) - bank->toggle_mask |= 1 << gpio; - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - set_24xx_gpio_triggering(bank, gpio, trigger); - return 0; -#endif - default: - goto bad; - } - __raw_writel(l, reg); - return 0; -bad: - return -EINVAL; -} - -static int gpio_irq_type(struct irq_data *d, unsigned type) -{ - struct gpio_bank *bank; - unsigned gpio; - int retval; - unsigned long flags; - - if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE) - gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - else - gpio = d->irq - IH_GPIO_BASE; - - if (check_gpio(gpio) < 0) - return -EINVAL; - - if (type & ~IRQ_TYPE_SENSE_MASK) - return -EINVAL; - - /* OMAP1 allows only only edge triggering */ - if (!cpu_class_is_omap2() - && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) - return -EINVAL; - - bank = irq_data_get_irq_chip_data(d); - spin_lock_irqsave(&bank->lock, flags); - retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); - spin_unlock_irqrestore(&bank->lock, flags); - - if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __irq_set_handler_locked(d->irq, handle_level_irq); - else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __irq_set_handler_locked(d->irq, handle_edge_irq); - - return retval; -} - -static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - /* MPUIO irqstatus is reset by reading the status register, - * so do nothing here */ - return; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_STATUS; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_IRQSTATUS1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_STATUS; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_IRQSTATUS1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_IRQSTATUS0; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(gpio_mask, reg); - - /* Workaround for clearing DSP GPIO interrupts to allow retention */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; - else if (cpu_is_omap44xx()) - reg = bank->base + OMAP4_GPIO_IRQSTATUS1; - - if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) { - __raw_writel(gpio_mask, reg); - - /* Flush posted write for the irq status to avoid spurious interrupts */ - __raw_readl(reg); - } -} - -static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) -{ - _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio)); -} - -static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) -{ - void __iomem *reg = bank->base; - int inv = 0; - u32 l; - u32 mask; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; - mask = 0xffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_MASK; - mask = 0xffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_IRQENABLE1; - mask = 0xffff; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_IRQENABLE1; - mask = 0xffffffff; - break; -#endif -#if defined(CONFIG_ARCH_OMAP4) - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_IRQSTATUSSET0; - mask = 0xffffffff; - break; -#endif - default: - WARN_ON(1); - return 0; - } - - l = __raw_readl(reg); - if (inv) - l = ~l; - l &= mask; - return l; -} - -static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) -{ - void __iomem *reg = bank->base; - u32 l; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP1 - case METHOD_MPUIO: - reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - if (enable) - reg += OMAP1610_GPIO_SET_IRQENABLE1; - else - reg += OMAP1610_GPIO_CLEAR_IRQENABLE1; - l = gpio_mask; - break; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - if (enable) - reg += OMAP24XX_GPIO_SETIRQENABLE1; - else - reg += OMAP24XX_GPIO_CLEARIRQENABLE1; - l = gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - if (enable) - reg += OMAP4_GPIO_IRQSTATUSSET0; - else - reg += OMAP4_GPIO_IRQSTATUSCLR0; - l = gpio_mask; - break; -#endif - default: - WARN_ON(1); - return; - } - __raw_writel(l, reg); -} - -static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) -{ - _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); -} - -/* - * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. - * 1510 does not seem to have a wake-up register. If JTAG is connected - * to the target, system will wake up always on GPIO events. While - * system is running all registered GPIO interrupts need to have wake-up - * enabled. When system is suspended, only selected GPIO interrupts need - * to have wake-up enabled. - */ -static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) -{ - unsigned long uninitialized_var(flags); - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_MPUIO: - case METHOD_GPIO_1610: - spin_lock_irqsave(&bank->lock, flags); - if (enable) - bank->suspend_wakeup |= (1 << gpio); - else - bank->suspend_wakeup &= ~(1 << gpio); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -#endif -#ifdef CONFIG_ARCH_OMAP2PLUS - case METHOD_GPIO_24XX: - case METHOD_GPIO_44XX: - if (bank->non_wakeup_gpios & (1 << gpio)) { - printk(KERN_ERR "Unable to modify wakeup on " - "non-wakeup GPIO%d\n", - (bank - gpio_bank) * 32 + gpio); - return -EINVAL; - } - spin_lock_irqsave(&bank->lock, flags); - if (enable) - bank->suspend_wakeup |= (1 << gpio); - else - bank->suspend_wakeup &= ~(1 << gpio); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -#endif - default: - printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", - bank->method); - return -EINVAL; - } -} - -static void _reset_gpio(struct gpio_bank *bank, int gpio) -{ - _set_gpio_direction(bank, get_gpio_index(gpio), 1); - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); -} - -/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ -static int gpio_wake_enable(struct irq_data *d, unsigned int enable) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank; - int retval; - - if (check_gpio(gpio) < 0) - return -ENODEV; - bank = irq_data_get_irq_chip_data(d); - retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); - - return retval; -} - -static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); - - /* Set trigger to none. You need to enable the desired trigger with - * request_irq() or set_irq_type(). - */ - _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); - -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) { - void __iomem *reg; - - /* Claim the pin for MPU */ - reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; - __raw_writel(__raw_readl(reg) | (1 << offset), reg); - } -#endif - if (!cpu_class_is_omap1()) { - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is enabled, clocks are not gated */ - ctrl &= 0xFFFFFFFE; - __raw_writel(ctrl, reg); - } - bank->mod_usage |= 1 << offset; - } - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); -#ifdef CONFIG_ARCH_OMAP16XX - if (bank->method == METHOD_GPIO_1610) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - __raw_writel(1 << offset, reg); - } -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - __raw_writel(1 << offset, reg); - } -#endif -#ifdef CONFIG_ARCH_OMAP4 - if (bank->method == METHOD_GPIO_44XX) { - /* Disable wake-up during idle for dynamic tick */ - void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0; - __raw_writel(1 << offset, reg); - } -#endif - if (!cpu_class_is_omap1()) { - bank->mod_usage &= ~(1 << offset); - if (!bank->mod_usage) { - void __iomem *reg = bank->base; - u32 ctrl; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - reg += OMAP24XX_GPIO_CTRL; - else if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_CTRL; - ctrl = __raw_readl(reg); - /* Module is disabled, clocks are gated */ - ctrl |= 1; - __raw_writel(ctrl, reg); - } - } - _reset_gpio(bank, bank->chip.base + offset); - spin_unlock_irqrestore(&bank->lock, flags); -} - -/* - * We need to unmask the GPIO bank interrupt as soon as possible to - * avoid missing GPIO interrupts for other lines in the bank. - * Then we need to mask-read-clear-unmask the triggered GPIO lines - * in the bank to avoid missing nested interrupts for a GPIO line. - * If we wait to unmask individual GPIO lines in the bank after the - * line's interrupt handler has been run, we may miss some nested - * interrupts. - */ -static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - void __iomem *isr_reg = NULL; - u32 isr; - unsigned int gpio_irq, gpio_index; - struct gpio_bank *bank; - u32 retrigger = 0; - int unmasked = 0; - struct irq_chip *chip = irq_desc_get_chip(desc); - - chained_irq_enter(chip, desc); - - bank = irq_get_handler_data(irq); -#ifdef CONFIG_ARCH_OMAP1 - if (bank->method == METHOD_MPUIO) - isr_reg = bank->base + - OMAP_MPUIO_GPIO_INT / bank->stride; -#endif -#ifdef CONFIG_ARCH_OMAP15XX - if (bank->method == METHOD_GPIO_1510) - isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; -#endif -#if defined(CONFIG_ARCH_OMAP16XX) - if (bank->method == METHOD_GPIO_1610) - isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; -#endif -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - if (bank->method == METHOD_GPIO_7XX) - isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - if (bank->method == METHOD_GPIO_24XX) - isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; -#endif -#if defined(CONFIG_ARCH_OMAP4) - if (bank->method == METHOD_GPIO_44XX) - isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0; -#endif - - if (WARN_ON(!isr_reg)) - goto exit; - - while(1) { - u32 isr_saved, level_mask = 0; - u32 enabled; - - enabled = _get_gpio_irqbank_mask(bank); - isr_saved = isr = __raw_readl(isr_reg) & enabled; - - if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) - isr &= 0x0000ffff; - - if (cpu_class_is_omap2()) { - level_mask = bank->level_mask & enabled; - } - - /* clear edge sensitive interrupts before handler(s) are - called so that we don't miss any interrupt occurred while - executing them */ - _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0); - _clear_gpio_irqbank(bank, isr_saved & ~level_mask); - _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1); - - /* if there is only edge sensitive GPIO pin interrupts - configured, we could unmask GPIO bank interrupt immediately */ - if (!level_mask && !unmasked) { - unmasked = 1; - chained_irq_exit(chip, desc); - } - - isr |= retrigger; - retrigger = 0; - if (!isr) - break; - - gpio_irq = bank->virtual_irq_start; - for (; isr != 0; isr >>= 1, gpio_irq++) { - gpio_index = get_gpio_index(irq_to_gpio(gpio_irq)); - - if (!(isr & 1)) - continue; - -#ifdef CONFIG_ARCH_OMAP1 - /* - * Some chips can't respond to both rising and falling - * at the same time. If this irq was requested with - * both flags, we need to flip the ICR data for the IRQ - * to respond to the IRQ for the opposite direction. - * This will be indicated in the bank toggle_mask. - */ - if (bank->toggle_mask & (1 << gpio_index)) - _toggle_gpio_edge_triggering(bank, gpio_index); -#endif - - generic_handle_irq(gpio_irq); - } - } - /* if bank has any level sensitive GPIO pin interrupt - configured, we must unmask the bank interrupt only after - handler(s) are executed in order to avoid spurious bank - interrupt */ -exit: - if (!unmasked) - chained_irq_exit(chip, desc); -} - -static void gpio_irq_shutdown(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _reset_gpio(bank, gpio); -} - -static void gpio_ack_irq(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _clear_gpio_irqstatus(bank, gpio); -} - -static void gpio_mask_irq(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _set_gpio_irqenable(bank, gpio, 0); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); -} - -static void gpio_unmask_irq(struct irq_data *d) -{ - unsigned int gpio = d->irq - IH_GPIO_BASE; - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - unsigned int irq_mask = 1 << get_gpio_index(gpio); - u32 trigger = irqd_get_trigger_type(d); - - if (trigger) - _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); - - /* For level-triggered GPIOs, the clearing must be done after - * the HW source is cleared, thus after the handler has run */ - if (bank->level_mask & irq_mask) { - _set_gpio_irqenable(bank, gpio, 0); - _clear_gpio_irqstatus(bank, gpio); - } - - _set_gpio_irqenable(bank, gpio, 1); -} - -static struct irq_chip gpio_irq_chip = { - .name = "GPIO", - .irq_shutdown = gpio_irq_shutdown, - .irq_ack = gpio_ack_irq, - .irq_mask = gpio_mask_irq, - .irq_unmask = gpio_unmask_irq, - .irq_set_type = gpio_irq_type, - .irq_set_wake = gpio_wake_enable, -}; - -/*---------------------------------------------------------------------*/ - -#ifdef CONFIG_ARCH_OMAP1 - -/* MPUIO uses the always-on 32k clock */ - -static void mpuio_ack_irq(struct irq_data *d) -{ - /* The ISR is reset automatically, so do nothing here. */ -} - -static void mpuio_mask_irq(struct irq_data *d) -{ - unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _set_gpio_irqenable(bank, gpio, 0); -} - -static void mpuio_unmask_irq(struct irq_data *d) -{ - unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); - struct gpio_bank *bank = irq_data_get_irq_chip_data(d); - - _set_gpio_irqenable(bank, gpio, 1); -} - -static struct irq_chip mpuio_irq_chip = { - .name = "MPUIO", - .irq_ack = mpuio_ack_irq, - .irq_mask = mpuio_mask_irq, - .irq_unmask = mpuio_unmask_irq, - .irq_set_type = gpio_irq_type, -#ifdef CONFIG_ARCH_OMAP16XX - /* REVISIT: assuming only 16xx supports MPUIO wake events */ - .irq_set_wake = gpio_wake_enable, -#endif -}; - - -#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO) - - -#ifdef CONFIG_ARCH_OMAP16XX - -#include - -static int omap_mpuio_suspend_noirq(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct gpio_bank *bank = platform_get_drvdata(pdev); - void __iomem *mask_reg = bank->base + - OMAP_MPUIO_GPIO_MASKIT / bank->stride; - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); - bank->saved_wakeup = __raw_readl(mask_reg); - __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg); - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static int omap_mpuio_resume_noirq(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct gpio_bank *bank = platform_get_drvdata(pdev); - void __iomem *mask_reg = bank->base + - OMAP_MPUIO_GPIO_MASKIT / bank->stride; - unsigned long flags; - - spin_lock_irqsave(&bank->lock, flags); - __raw_writel(bank->saved_wakeup, mask_reg); - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static const struct dev_pm_ops omap_mpuio_dev_pm_ops = { - .suspend_noirq = omap_mpuio_suspend_noirq, - .resume_noirq = omap_mpuio_resume_noirq, -}; - -/* use platform_driver for this. */ -static struct platform_driver omap_mpuio_driver = { - .driver = { - .name = "mpuio", - .pm = &omap_mpuio_dev_pm_ops, - }, -}; - -static struct platform_device omap_mpuio_device = { - .name = "mpuio", - .id = -1, - .dev = { - .driver = &omap_mpuio_driver.driver, - } - /* could list the /proc/iomem resources */ -}; - -static inline void mpuio_init(void) -{ - struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0)); - platform_set_drvdata(&omap_mpuio_device, bank); - - if (platform_driver_register(&omap_mpuio_driver) == 0) - (void) platform_device_register(&omap_mpuio_device); -} - -#else -static inline void mpuio_init(void) {} -#endif /* 16xx */ - -#else - -extern struct irq_chip mpuio_irq_chip; - -#define bank_is_mpuio(bank) 0 -static inline void mpuio_init(void) {} - -#endif - -/*---------------------------------------------------------------------*/ - -/* REVISIT these are stupid implementations! replace by ones that - * don't switch on METHOD_* and which mostly avoid spinlocks - */ - -static int gpio_input(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_direction(bank, offset, 1); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -} - -static int gpio_is_input(struct gpio_bank *bank, int mask) -{ - void __iomem *reg = bank->base; - - switch (bank->method) { - case METHOD_MPUIO: - reg += OMAP_MPUIO_IO_CNTL / bank->stride; - break; - case METHOD_GPIO_1510: - reg += OMAP1510_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_1610: - reg += OMAP1610_GPIO_DIRECTION; - break; - case METHOD_GPIO_7XX: - reg += OMAP7XX_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_24XX: - reg += OMAP24XX_GPIO_OE; - break; - case METHOD_GPIO_44XX: - reg += OMAP4_GPIO_OE; - break; - default: - WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method"); - return -EINVAL; - } - return __raw_readl(reg) & mask; -} - -static int gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank; - void __iomem *reg; - int gpio; - u32 mask; - - gpio = chip->base + offset; - bank = get_gpio_bank(gpio); - reg = bank->base; - mask = 1 << get_gpio_index(gpio); - - if (gpio_is_input(bank, mask)) - return _get_gpio_datain(bank, gpio); - else - return _get_gpio_dataout(bank, gpio); -} - -static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_dataout(bank, offset, value); - _set_gpio_direction(bank, offset, 0); - spin_unlock_irqrestore(&bank->lock, flags); - return 0; -} - -static int gpio_debounce(struct gpio_chip *chip, unsigned offset, - unsigned debounce) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - - if (!bank->dbck) { - bank->dbck = clk_get(bank->dev, "dbclk"); - if (IS_ERR(bank->dbck)) - dev_err(bank->dev, "Could not get gpio dbck\n"); - } - - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_debounce(bank, offset, debounce); - spin_unlock_irqrestore(&bank->lock, flags); - - return 0; -} - -static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct gpio_bank *bank; - unsigned long flags; - - bank = container_of(chip, struct gpio_bank, chip); - spin_lock_irqsave(&bank->lock, flags); - _set_gpio_dataout(bank, offset, value); - spin_unlock_irqrestore(&bank->lock, flags); -} - -static int gpio_2irq(struct gpio_chip *chip, unsigned offset) -{ - struct gpio_bank *bank; - - bank = container_of(chip, struct gpio_bank, chip); - return bank->virtual_irq_start + offset; -} - -/*---------------------------------------------------------------------*/ - -static void __init omap_gpio_show_rev(struct gpio_bank *bank) -{ - u32 rev; - - if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO)) - rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION); - else if (cpu_is_omap24xx() || cpu_is_omap34xx()) - rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION); - else if (cpu_is_omap44xx()) - rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION); - else - return; - - printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", - (rev >> 4) & 0x0f, rev & 0x0f); -} - -/* This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -static inline int init_gpio_info(struct platform_device *pdev) -{ - /* TODO: Analyze removing gpio_bank_count usage from driver code */ - gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank), - GFP_KERNEL); - if (!gpio_bank) { - dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); - return -ENOMEM; - } - return 0; -} - -/* TODO: Cleanup cpu_is_* checks */ -static void omap_gpio_mod_init(struct gpio_bank *bank, int id) -{ - if (cpu_class_is_omap2()) { - if (cpu_is_omap44xx()) { - __raw_writel(0xffffffff, bank->base + - OMAP4_GPIO_IRQSTATUSCLR0); - __raw_writel(0x00000000, bank->base + - OMAP4_GPIO_DEBOUNCENABLE); - /* Initialize interface clk ungated, module enabled */ - __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); - } else if (cpu_is_omap34xx()) { - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(0xffffffff, bank->base + - OMAP24XX_GPIO_IRQSTATUS1); - __raw_writel(0x00000000, bank->base + - OMAP24XX_GPIO_DEBOUNCE_EN); - - /* Initialize interface clk ungated, module enabled */ - __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); - } else if (cpu_is_omap24xx()) { - static const u32 non_wakeup_gpios[] = { - 0xe203ffc0, 0x08700040 - }; - if (id < ARRAY_SIZE(non_wakeup_gpios)) - bank->non_wakeup_gpios = non_wakeup_gpios[id]; - } - } else if (cpu_class_is_omap1()) { - if (bank_is_mpuio(bank)) - __raw_writew(0xffff, bank->base + - OMAP_MPUIO_GPIO_MASKIT / bank->stride); - if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { - __raw_writew(0xffff, bank->base - + OMAP1510_GPIO_INT_MASK); - __raw_writew(0x0000, bank->base - + OMAP1510_GPIO_INT_STATUS); - } - if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { - __raw_writew(0x0000, bank->base - + OMAP1610_GPIO_IRQENABLE1); - __raw_writew(0xffff, bank->base - + OMAP1610_GPIO_IRQSTATUS1); - __raw_writew(0x0014, bank->base - + OMAP1610_GPIO_SYSCONFIG); - - /* - * Enable system clock for GPIO module. - * The CAM_CLK_CTRL *is* really the right place. - */ - omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, - ULPD_CAM_CLK_CTRL); - } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { - __raw_writel(0xffffffff, bank->base - + OMAP7XX_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base - + OMAP7XX_GPIO_INT_STATUS); - } - } -} - -static void __init omap_gpio_chip_init(struct gpio_bank *bank) -{ - int j; - static int gpio; - - bank->mod_usage = 0; - /* - * REVISIT eventually switch from OMAP-specific gpio structs - * over to the generic ones - */ - bank->chip.request = omap_gpio_request; - bank->chip.free = omap_gpio_free; - bank->chip.direction_input = gpio_input; - bank->chip.get = gpio_get; - bank->chip.direction_output = gpio_output; - bank->chip.set_debounce = gpio_debounce; - bank->chip.set = gpio_set; - bank->chip.to_irq = gpio_2irq; - if (bank_is_mpuio(bank)) { - bank->chip.label = "mpuio"; -#ifdef CONFIG_ARCH_OMAP16XX - bank->chip.dev = &omap_mpuio_device.dev; -#endif - bank->chip.base = OMAP_MPUIO(0); - } else { - bank->chip.label = "gpio"; - bank->chip.base = gpio; - gpio += bank_width; - } - bank->chip.ngpio = bank_width; - - gpiochip_add(&bank->chip); - - for (j = bank->virtual_irq_start; - j < bank->virtual_irq_start + bank_width; j++) { - irq_set_lockdep_class(j, &gpio_lock_class); - irq_set_chip_data(j, bank); - if (bank_is_mpuio(bank)) - irq_set_chip(j, &mpuio_irq_chip); - else - irq_set_chip(j, &gpio_irq_chip); - irq_set_handler(j, handle_simple_irq); - set_irq_flags(j, IRQF_VALID); - } - irq_set_chained_handler(bank->irq, gpio_irq_handler); - irq_set_handler_data(bank->irq, bank); -} - -static int __devinit omap_gpio_probe(struct platform_device *pdev) -{ - static int gpio_init_done; - struct omap_gpio_platform_data *pdata; - struct resource *res; - int id; - struct gpio_bank *bank; - - if (!pdev->dev.platform_data) - return -EINVAL; - - pdata = pdev->dev.platform_data; - - if (!gpio_init_done) { - int ret; - - ret = init_gpio_info(pdev); - if (ret) - return ret; - } - - id = pdev->id; - bank = &gpio_bank[id]; - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (unlikely(!res)) { - dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id); - return -ENODEV; - } - - bank->irq = res->start; - bank->virtual_irq_start = pdata->virtual_irq_start; - bank->method = pdata->bank_type; - bank->dev = &pdev->dev; - bank->dbck_flag = pdata->dbck_flag; - bank->stride = pdata->bank_stride; - bank_width = pdata->bank_width; - - spin_lock_init(&bank->lock); - - /* Static mapping, never released */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (unlikely(!res)) { - dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id); - return -ENODEV; - } - - bank->base = ioremap(res->start, resource_size(res)); - if (!bank->base) { - dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id); - return -ENOMEM; - } - - pm_runtime_enable(bank->dev); - pm_runtime_get_sync(bank->dev); - - omap_gpio_mod_init(bank, id); - omap_gpio_chip_init(bank); - omap_gpio_show_rev(bank); - - if (!gpio_init_done) - gpio_init_done = 1; - - return 0; -} - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) -static int omap_gpio_suspend(void) -{ - int i; - - if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) - return 0; - - for (i = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - void __iomem *wake_status; - void __iomem *wake_clear; - void __iomem *wake_set; - unsigned long flags; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; - wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; - break; -#endif - default: - continue; - } - - spin_lock_irqsave(&bank->lock, flags); - bank->saved_wakeup = __raw_readl(wake_status); - __raw_writel(0xffffffff, wake_clear); - __raw_writel(bank->suspend_wakeup, wake_set); - spin_unlock_irqrestore(&bank->lock, flags); - } - - return 0; -} - -static void omap_gpio_resume(void) -{ - int i; - - if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) - return; - - for (i = 0; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - void __iomem *wake_clear; - void __iomem *wake_set; - unsigned long flags; - - switch (bank->method) { -#ifdef CONFIG_ARCH_OMAP16XX - case METHOD_GPIO_1610: - wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; - wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; - break; -#endif -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) - case METHOD_GPIO_24XX: - wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; - wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; - break; -#endif -#ifdef CONFIG_ARCH_OMAP4 - case METHOD_GPIO_44XX: - wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; - wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; - break; -#endif - default: - continue; - } - - spin_lock_irqsave(&bank->lock, flags); - __raw_writel(0xffffffff, wake_clear); - __raw_writel(bank->saved_wakeup, wake_set); - spin_unlock_irqrestore(&bank->lock, flags); - } -} - -static struct syscore_ops omap_gpio_syscore_ops = { - .suspend = omap_gpio_suspend, - .resume = omap_gpio_resume, -}; - -#endif - -#ifdef CONFIG_ARCH_OMAP2PLUS - -static int workaround_enabled; - -void omap2_gpio_prepare_for_idle(int off_mode) -{ - int i, c = 0; - int min = 0; - - if (cpu_is_omap34xx()) - min = 1; - - for (i = min; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - u32 l1 = 0, l2 = 0; - int j; - - for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) - clk_disable(bank->dbck); - - if (!off_mode) - continue; - - /* If going to OFF, remove triggering for all - * non-wakeup GPIOs. Otherwise spurious IRQs will be - * generated. See OMAP2420 Errata item 1.101. */ - if (!(bank->enabled_non_wakeup_gpios)) - continue; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP24XX_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP24XX_GPIO_RISINGDETECT); - } - - if (cpu_is_omap44xx()) { - bank->saved_datain = __raw_readl(bank->base + - OMAP4_GPIO_DATAIN); - l1 = __raw_readl(bank->base + - OMAP4_GPIO_FALLINGDETECT); - l2 = __raw_readl(bank->base + - OMAP4_GPIO_RISINGDETECT); - } - - bank->saved_fallingdetect = l1; - bank->saved_risingdetect = l2; - l1 &= ~bank->enabled_non_wakeup_gpios; - l2 &= ~bank->enabled_non_wakeup_gpios; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(l1, bank->base + - OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + - OMAP24XX_GPIO_RISINGDETECT); - } - - if (cpu_is_omap44xx()) { - __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); - } - - c++; - } - if (!c) { - workaround_enabled = 0; - return; - } - workaround_enabled = 1; -} - -void omap2_gpio_resume_after_idle(void) -{ - int i; - int min = 0; - - if (cpu_is_omap34xx()) - min = 1; - for (i = min; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - u32 l = 0, gen, gen0, gen1; - int j; - - for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) - clk_enable(bank->dbck); - - if (!workaround_enabled) - continue; - - if (!(bank->enabled_non_wakeup_gpios)) - continue; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); - } - - if (cpu_is_omap44xx()) { - __raw_writel(bank->saved_fallingdetect, - bank->base + OMAP4_GPIO_FALLINGDETECT); - __raw_writel(bank->saved_risingdetect, - bank->base + OMAP4_GPIO_RISINGDETECT); - l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); - } - - /* Check if any of the non-wakeup interrupt GPIOs have changed - * state. If so, generate an IRQ by software. This is - * horribly racy, but it's the best we can do to work around - * this silicon bug. */ - l ^= bank->saved_datain; - l &= bank->enabled_non_wakeup_gpios; - - /* - * No need to generate IRQs for the rising edge for gpio IRQs - * configured with falling edge only; and vice versa. - */ - gen0 = l & bank->saved_fallingdetect; - gen0 &= bank->saved_datain; - - gen1 = l & bank->saved_risingdetect; - gen1 &= ~(bank->saved_datain); - - /* FIXME: Consider GPIO IRQs with level detections properly! */ - gen = l & (~(bank->saved_fallingdetect) & - ~(bank->saved_risingdetect)); - /* Consider all GPIO IRQs needed to be updated */ - gen |= gen0 | gen1; - - if (gen) { - u32 old0, old1; - - if (cpu_is_omap24xx() || cpu_is_omap34xx()) { - old0 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1 | gen, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP24XX_GPIO_LEVELDETECT1); - } - - if (cpu_is_omap44xx()) { - old0 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT0); - old1 = __raw_readl(bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0 | l, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1 | l, bank->base + - OMAP4_GPIO_LEVELDETECT1); - __raw_writel(old0, bank->base + - OMAP4_GPIO_LEVELDETECT0); - __raw_writel(old1, bank->base + - OMAP4_GPIO_LEVELDETECT1); - } - } - } - -} - -#endif - -#ifdef CONFIG_ARCH_OMAP3 -/* save the registers of bank 2-6 */ -void omap_gpio_save_context(void) -{ - int i; - - /* saving banks from 2-6 only since GPIO1 is in WKUP */ - for (i = 1; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - gpio_context[i].irqenable1 = - __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); - gpio_context[i].irqenable2 = - __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); - gpio_context[i].wake_en = - __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); - gpio_context[i].ctrl = - __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); - gpio_context[i].oe = - __raw_readl(bank->base + OMAP24XX_GPIO_OE); - gpio_context[i].leveldetect0 = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); - gpio_context[i].leveldetect1 = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); - gpio_context[i].risingdetect = - __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); - gpio_context[i].fallingdetect = - __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); - gpio_context[i].dataout = - __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); - } -} - -/* restore the required registers of bank 2-6 */ -void omap_gpio_restore_context(void) -{ - int i; - - for (i = 1; i < gpio_bank_count; i++) { - struct gpio_bank *bank = &gpio_bank[i]; - __raw_writel(gpio_context[i].irqenable1, - bank->base + OMAP24XX_GPIO_IRQENABLE1); - __raw_writel(gpio_context[i].irqenable2, - bank->base + OMAP24XX_GPIO_IRQENABLE2); - __raw_writel(gpio_context[i].wake_en, - bank->base + OMAP24XX_GPIO_WAKE_EN); - __raw_writel(gpio_context[i].ctrl, - bank->base + OMAP24XX_GPIO_CTRL); - __raw_writel(gpio_context[i].oe, - bank->base + OMAP24XX_GPIO_OE); - __raw_writel(gpio_context[i].leveldetect0, - bank->base + OMAP24XX_GPIO_LEVELDETECT0); - __raw_writel(gpio_context[i].leveldetect1, - bank->base + OMAP24XX_GPIO_LEVELDETECT1); - __raw_writel(gpio_context[i].risingdetect, - bank->base + OMAP24XX_GPIO_RISINGDETECT); - __raw_writel(gpio_context[i].fallingdetect, - bank->base + OMAP24XX_GPIO_FALLINGDETECT); - __raw_writel(gpio_context[i].dataout, - bank->base + OMAP24XX_GPIO_DATAOUT); - } -} -#endif - -static struct platform_driver omap_gpio_driver = { - .probe = omap_gpio_probe, - .driver = { - .name = "omap_gpio", - }, -}; - -/* - * gpio driver register needs to be done before - * machine_init functions access gpio APIs. - * Hence omap_gpio_drv_reg() is a postcore_initcall. - */ -static int __init omap_gpio_drv_reg(void) -{ - return platform_driver_register(&omap_gpio_driver); -} -postcore_initcall(omap_gpio_drv_reg); - -static int __init omap_gpio_sysinit(void) -{ - mpuio_init(); - -#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) - if (cpu_is_omap16xx() || cpu_class_is_omap2()) - register_syscore_ops(&omap_gpio_syscore_ops); -#endif - - return 0; -} - -arch_initcall(omap_gpio_sysinit); diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index becef5954356..a6f1d42f2653 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_GPIO_MAX732X) += max732x.o obj-$(CONFIG_GPIO_MC33880) += mc33880.o obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_74X164) += 74x164.o +obj-$(CONFIG_ARCH_OMAP) += gpio-omap.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o obj-$(CONFIG_GPIO_PCH) += pch_gpio.o diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c new file mode 100644 index 000000000000..6c51191da567 --- /dev/null +++ b/drivers/gpio/gpio-omap.c @@ -0,0 +1,2007 @@ +/* + * Support functions for OMAP GPIO + * + * Copyright (C) 2003-2005 Nokia Corporation + * Written by Juha Yrjölä + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +struct gpio_bank { + unsigned long pbase; + void __iomem *base; + u16 irq; + u16 virtual_irq_start; + int method; +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) + u32 suspend_wakeup; + u32 saved_wakeup; +#endif + u32 non_wakeup_gpios; + u32 enabled_non_wakeup_gpios; + + u32 saved_datain; + u32 saved_fallingdetect; + u32 saved_risingdetect; + u32 level_mask; + u32 toggle_mask; + spinlock_t lock; + struct gpio_chip chip; + struct clk *dbck; + u32 mod_usage; + u32 dbck_enable_mask; + struct device *dev; + bool dbck_flag; + int stride; +}; + +#ifdef CONFIG_ARCH_OMAP3 +struct omap3_gpio_regs { + u32 irqenable1; + u32 irqenable2; + u32 wake_en; + u32 ctrl; + u32 oe; + u32 leveldetect0; + u32 leveldetect1; + u32 risingdetect; + u32 fallingdetect; + u32 dataout; +}; + +static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS]; +#endif + +/* + * TODO: Cleanup gpio_bank usage as it is having information + * related to all instances of the device + */ +static struct gpio_bank *gpio_bank; + +static int bank_width; + +/* TODO: Analyze removing gpio_bank_count usage from driver code */ +int gpio_bank_count; + +static inline struct gpio_bank *get_gpio_bank(int gpio) +{ + if (cpu_is_omap15xx()) { + if (OMAP_GPIO_IS_MPUIO(gpio)) + return &gpio_bank[0]; + return &gpio_bank[1]; + } + if (cpu_is_omap16xx()) { + if (OMAP_GPIO_IS_MPUIO(gpio)) + return &gpio_bank[0]; + return &gpio_bank[1 + (gpio >> 4)]; + } + if (cpu_is_omap7xx()) { + if (OMAP_GPIO_IS_MPUIO(gpio)) + return &gpio_bank[0]; + return &gpio_bank[1 + (gpio >> 5)]; + } + if (cpu_is_omap24xx()) + return &gpio_bank[gpio >> 5]; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) + return &gpio_bank[gpio >> 5]; + BUG(); + return NULL; +} + +static inline int get_gpio_index(int gpio) +{ + if (cpu_is_omap7xx()) + return gpio & 0x1f; + if (cpu_is_omap24xx()) + return gpio & 0x1f; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) + return gpio & 0x1f; + return gpio & 0x0f; +} + +static inline int gpio_valid(int gpio) +{ + if (gpio < 0) + return -1; + if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) { + if (gpio >= OMAP_MAX_GPIO_LINES + 16) + return -1; + return 0; + } + if (cpu_is_omap15xx() && gpio < 16) + return 0; + if ((cpu_is_omap16xx()) && gpio < 64) + return 0; + if (cpu_is_omap7xx() && gpio < 192) + return 0; + if (cpu_is_omap2420() && gpio < 128) + return 0; + if (cpu_is_omap2430() && gpio < 160) + return 0; + if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192) + return 0; + return -1; +} + +static int check_gpio(int gpio) +{ + if (unlikely(gpio_valid(gpio) < 0)) { + printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio); + dump_stack(); + return -1; + } + return 0; +} + +static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) +{ + void __iomem *reg = bank->base; + u32 l; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_IO_CNTL / bank->stride; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DIR_CONTROL; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DIRECTION; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; +#endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_OE; + break; +#endif + default: + WARN_ON(1); + return; + } + l = __raw_readl(reg); + if (is_input) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + __raw_writel(l, reg); +} + +static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) +{ + void __iomem *reg = bank->base; + u32 l = 0; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_OUTPUT / bank->stride; + l = __raw_readl(reg); + if (enable) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_OUTPUT; + l = __raw_readl(reg); + if (enable) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + if (enable) + reg += OMAP1610_GPIO_SET_DATAOUT; + else + reg += OMAP1610_GPIO_CLEAR_DATAOUT; + l = 1 << gpio; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; + l = __raw_readl(reg); + if (enable) + l |= 1 << gpio; + else + l &= ~(1 << gpio); + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETDATAOUT; + else + reg += OMAP24XX_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + if (enable) + reg += OMAP4_GPIO_SETDATAOUT; + else + reg += OMAP4_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; +#endif + default: + WARN_ON(1); + return; + } + __raw_writel(l, reg); +} + +static int _get_gpio_datain(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + reg = bank->base; + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_INPUT_LATCH / bank->stride; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_INPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DATAIN; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_INPUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAIN; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_DATAIN; + break; +#endif + default: + return -EINVAL; + } + return (__raw_readl(reg) + & (1 << get_gpio_index(gpio))) != 0; +} + +static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg; + + if (check_gpio(gpio) < 0) + return -EINVAL; + reg = bank->base; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_OUTPUT / bank->stride; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DATA_OUTPUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DATAOUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_DATAOUT; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_DATAOUT; + break; +#endif + default: + return -EINVAL; + } + + return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0; +} + +#define MOD_REG_BIT(reg, bit_mask, set) \ +do { \ + int l = __raw_readl(base + reg); \ + if (set) l |= bit_mask; \ + else l &= ~bit_mask; \ + __raw_writel(l, base + reg); \ +} while(0) + +/** + * _set_gpio_debounce - low level gpio debounce time + * @bank: the gpio bank we're acting upon + * @gpio: the gpio number on this @gpio + * @debounce: debounce time to use + * + * OMAP's debounce time is in 31us steps so we need + * to convert and round up to the closest unit. + */ +static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, + unsigned debounce) +{ + void __iomem *reg = bank->base; + u32 val; + u32 l; + + if (!bank->dbck_flag) + return; + + if (debounce < 32) + debounce = 0x01; + else if (debounce > 7936) + debounce = 0xff; + else + debounce = (debounce / 0x1f) - 1; + + l = 1 << get_gpio_index(gpio); + + if (bank->method == METHOD_GPIO_44XX) + reg += OMAP4_GPIO_DEBOUNCINGTIME; + else + reg += OMAP24XX_GPIO_DEBOUNCE_VAL; + + __raw_writel(debounce, reg); + + reg = bank->base; + if (bank->method == METHOD_GPIO_44XX) + reg += OMAP4_GPIO_DEBOUNCENABLE; + else + reg += OMAP24XX_GPIO_DEBOUNCE_EN; + + val = __raw_readl(reg); + + if (debounce) { + val |= l; + clk_enable(bank->dbck); + } else { + val &= ~l; + clk_disable(bank->dbck); + } + bank->dbck_enable_mask = val; + + __raw_writel(val, reg); +} + +#ifdef CONFIG_ARCH_OMAP2PLUS +static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, + int trigger) +{ + void __iomem *base = bank->base; + u32 gpio_bit = 1 << gpio; + u32 val; + + if (cpu_is_omap44xx()) { + MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + } else { + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + } + if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { + if (cpu_is_omap44xx()) { + if (trigger != 0) + __raw_writel(1 << gpio, bank->base+ + OMAP4_GPIO_IRQWAKEN0); + else { + val = __raw_readl(bank->base + + OMAP4_GPIO_IRQWAKEN0); + __raw_writel(val & (~(1 << gpio)), bank->base + + OMAP4_GPIO_IRQWAKEN0); + } + } else { + /* + * GPIO wakeup request can only be generated on edge + * transitions + */ + if (trigger & IRQ_TYPE_EDGE_BOTH) + __raw_writel(1 << gpio, bank->base + + OMAP24XX_GPIO_SETWKUENA); + else + __raw_writel(1 << gpio, bank->base + + OMAP24XX_GPIO_CLEARWKUENA); + } + } + /* This part needs to be executed always for OMAP34xx */ + if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) { + /* + * Log the edge gpio and manually trigger the IRQ + * after resume if the input level changes + * to avoid irq lost during PER RET/OFF mode + * Applies for omap2 non-wakeup gpio and all omap3 gpios + */ + if (trigger & IRQ_TYPE_EDGE_BOTH) + bank->enabled_non_wakeup_gpios |= gpio_bit; + else + bank->enabled_non_wakeup_gpios &= ~gpio_bit; + } + + if (cpu_is_omap44xx()) { + bank->level_mask = + __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); + } else { + bank->level_mask = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + } +} +#endif + +#ifdef CONFIG_ARCH_OMAP1 +/* + * This only applies to chips that can't do both rising and falling edge + * detection at once. For all other chips, this function is a noop. + */ +static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio) +{ + void __iomem *reg = bank->base; + u32 l = 0; + + switch (bank->method) { + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; + break; +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_CONTROL; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; + break; +#endif + default: + return; + } + + l = __raw_readl(reg); + if ((l >> gpio) & 1) + l &= ~(1 << gpio); + else + l |= 1 << gpio; + + __raw_writel(l, reg); +} +#endif + +static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) +{ + void __iomem *reg = bank->base; + u32 l = 0; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride; + l = __raw_readl(reg); + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 1 << gpio; + else if (trigger & IRQ_TYPE_EDGE_FALLING) + l &= ~(1 << gpio); + else + goto bad; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_CONTROL; + l = __raw_readl(reg); + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 1 << gpio; + else if (trigger & IRQ_TYPE_EDGE_FALLING) + l &= ~(1 << gpio); + else + goto bad; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + if (gpio & 0x08) + reg += OMAP1610_GPIO_EDGE_CTRL2; + else + reg += OMAP1610_GPIO_EDGE_CTRL1; + gpio &= 0x07; + l = __raw_readl(reg); + l &= ~(3 << (gpio << 1)); + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 2 << (gpio << 1); + if (trigger & IRQ_TYPE_EDGE_FALLING) + l |= 1 << (gpio << 1); + if (trigger) + /* Enable wake-up during idle for dynamic tick */ + __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA); + else + __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; + l = __raw_readl(reg); + if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) + bank->toggle_mask |= 1 << gpio; + if (trigger & IRQ_TYPE_EDGE_RISING) + l |= 1 << gpio; + else if (trigger & IRQ_TYPE_EDGE_FALLING) + l &= ~(1 << gpio); + else + goto bad; + break; +#endif +#ifdef CONFIG_ARCH_OMAP2PLUS + case METHOD_GPIO_24XX: + case METHOD_GPIO_44XX: + set_24xx_gpio_triggering(bank, gpio, trigger); + return 0; +#endif + default: + goto bad; + } + __raw_writel(l, reg); + return 0; +bad: + return -EINVAL; +} + +static int gpio_irq_type(struct irq_data *d, unsigned type) +{ + struct gpio_bank *bank; + unsigned gpio; + int retval; + unsigned long flags; + + if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE) + gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); + else + gpio = d->irq - IH_GPIO_BASE; + + if (check_gpio(gpio) < 0) + return -EINVAL; + + if (type & ~IRQ_TYPE_SENSE_MASK) + return -EINVAL; + + /* OMAP1 allows only only edge triggering */ + if (!cpu_class_is_omap2() + && (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))) + return -EINVAL; + + bank = irq_data_get_irq_chip_data(d); + spin_lock_irqsave(&bank->lock, flags); + retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type); + spin_unlock_irqrestore(&bank->lock, flags); + + if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) + __irq_set_handler_locked(d->irq, handle_level_irq); + else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + __irq_set_handler_locked(d->irq, handle_edge_irq); + + return retval; +} + +static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) +{ + void __iomem *reg = bank->base; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + /* MPUIO irqstatus is reset by reading the status register, + * so do nothing here */ + return; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_STATUS; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_IRQSTATUS1; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_STATUS; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_IRQSTATUS1; + break; +#endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_IRQSTATUS0; + break; +#endif + default: + WARN_ON(1); + return; + } + __raw_writel(gpio_mask, reg); + + /* Workaround for clearing DSP GPIO interrupts to allow retention */ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; + else if (cpu_is_omap44xx()) + reg = bank->base + OMAP4_GPIO_IRQSTATUS1; + + if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) { + __raw_writel(gpio_mask, reg); + + /* Flush posted write for the irq status to avoid spurious interrupts */ + __raw_readl(reg); + } +} + +static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) +{ + _clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio)); +} + +static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) +{ + void __iomem *reg = bank->base; + int inv = 0; + u32 l; + u32 mask; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; + mask = 0xffff; + inv = 1; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_MASK; + mask = 0xffff; + inv = 1; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_IRQENABLE1; + mask = 0xffff; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; + mask = 0xffffffff; + inv = 1; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_IRQENABLE1; + mask = 0xffffffff; + break; +#endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_IRQSTATUSSET0; + mask = 0xffffffff; + break; +#endif + default: + WARN_ON(1); + return 0; + } + + l = __raw_readl(reg); + if (inv) + l = ~l; + l &= mask; + return l; +} + +static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable) +{ + void __iomem *reg = bank->base; + u32 l; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP1 + case METHOD_MPUIO: + reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride; + l = __raw_readl(reg); + if (enable) + l &= ~(gpio_mask); + else + l |= gpio_mask; + break; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_INT_MASK; + l = __raw_readl(reg); + if (enable) + l &= ~(gpio_mask); + else + l |= gpio_mask; + break; +#endif +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + if (enable) + reg += OMAP1610_GPIO_SET_IRQENABLE1; + else + reg += OMAP1610_GPIO_CLEAR_IRQENABLE1; + l = gpio_mask; + break; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; + l = __raw_readl(reg); + if (enable) + l &= ~(gpio_mask); + else + l |= gpio_mask; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP24XX_GPIO_SETIRQENABLE1; + else + reg += OMAP24XX_GPIO_CLEARIRQENABLE1; + l = gpio_mask; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + if (enable) + reg += OMAP4_GPIO_IRQSTATUSSET0; + else + reg += OMAP4_GPIO_IRQSTATUSCLR0; + l = gpio_mask; + break; +#endif + default: + WARN_ON(1); + return; + } + __raw_writel(l, reg); +} + +static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable) +{ + _enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable); +} + +/* + * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register. + * 1510 does not seem to have a wake-up register. If JTAG is connected + * to the target, system will wake up always on GPIO events. While + * system is running all registered GPIO interrupts need to have wake-up + * enabled. When system is suspended, only selected GPIO interrupts need + * to have wake-up enabled. + */ +static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable) +{ + unsigned long uninitialized_var(flags); + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_MPUIO: + case METHOD_GPIO_1610: + spin_lock_irqsave(&bank->lock, flags); + if (enable) + bank->suspend_wakeup |= (1 << gpio); + else + bank->suspend_wakeup &= ~(1 << gpio); + spin_unlock_irqrestore(&bank->lock, flags); + return 0; +#endif +#ifdef CONFIG_ARCH_OMAP2PLUS + case METHOD_GPIO_24XX: + case METHOD_GPIO_44XX: + if (bank->non_wakeup_gpios & (1 << gpio)) { + printk(KERN_ERR "Unable to modify wakeup on " + "non-wakeup GPIO%d\n", + (bank - gpio_bank) * 32 + gpio); + return -EINVAL; + } + spin_lock_irqsave(&bank->lock, flags); + if (enable) + bank->suspend_wakeup |= (1 << gpio); + else + bank->suspend_wakeup &= ~(1 << gpio); + spin_unlock_irqrestore(&bank->lock, flags); + return 0; +#endif + default: + printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n", + bank->method); + return -EINVAL; + } +} + +static void _reset_gpio(struct gpio_bank *bank, int gpio) +{ + _set_gpio_direction(bank, get_gpio_index(gpio), 1); + _set_gpio_irqenable(bank, gpio, 0); + _clear_gpio_irqstatus(bank, gpio); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); +} + +/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ +static int gpio_wake_enable(struct irq_data *d, unsigned int enable) +{ + unsigned int gpio = d->irq - IH_GPIO_BASE; + struct gpio_bank *bank; + int retval; + + if (check_gpio(gpio) < 0) + return -ENODEV; + bank = irq_data_get_irq_chip_data(d); + retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable); + + return retval; +} + +static int omap_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); + unsigned long flags; + + spin_lock_irqsave(&bank->lock, flags); + + /* Set trigger to none. You need to enable the desired trigger with + * request_irq() or set_irq_type(). + */ + _set_gpio_triggering(bank, offset, IRQ_TYPE_NONE); + +#ifdef CONFIG_ARCH_OMAP15XX + if (bank->method == METHOD_GPIO_1510) { + void __iomem *reg; + + /* Claim the pin for MPU */ + reg = bank->base + OMAP1510_GPIO_PIN_CONTROL; + __raw_writel(__raw_readl(reg) | (1 << offset), reg); + } +#endif + if (!cpu_class_is_omap1()) { + if (!bank->mod_usage) { + void __iomem *reg = bank->base; + u32 ctrl; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + reg += OMAP24XX_GPIO_CTRL; + else if (cpu_is_omap44xx()) + reg += OMAP4_GPIO_CTRL; + ctrl = __raw_readl(reg); + /* Module is enabled, clocks are not gated */ + ctrl &= 0xFFFFFFFE; + __raw_writel(ctrl, reg); + } + bank->mod_usage |= 1 << offset; + } + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static void omap_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip); + unsigned long flags; + + spin_lock_irqsave(&bank->lock, flags); +#ifdef CONFIG_ARCH_OMAP16XX + if (bank->method == METHOD_GPIO_1610) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + __raw_writel(1 << offset, reg); + } +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + if (bank->method == METHOD_GPIO_24XX) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + __raw_writel(1 << offset, reg); + } +#endif +#ifdef CONFIG_ARCH_OMAP4 + if (bank->method == METHOD_GPIO_44XX) { + /* Disable wake-up during idle for dynamic tick */ + void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0; + __raw_writel(1 << offset, reg); + } +#endif + if (!cpu_class_is_omap1()) { + bank->mod_usage &= ~(1 << offset); + if (!bank->mod_usage) { + void __iomem *reg = bank->base; + u32 ctrl; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + reg += OMAP24XX_GPIO_CTRL; + else if (cpu_is_omap44xx()) + reg += OMAP4_GPIO_CTRL; + ctrl = __raw_readl(reg); + /* Module is disabled, clocks are gated */ + ctrl |= 1; + __raw_writel(ctrl, reg); + } + } + _reset_gpio(bank, bank->chip.base + offset); + spin_unlock_irqrestore(&bank->lock, flags); +} + +/* + * We need to unmask the GPIO bank interrupt as soon as possible to + * avoid missing GPIO interrupts for other lines in the bank. + * Then we need to mask-read-clear-unmask the triggered GPIO lines + * in the bank to avoid missing nested interrupts for a GPIO line. + * If we wait to unmask individual GPIO lines in the bank after the + * line's interrupt handler has been run, we may miss some nested + * interrupts. + */ +static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) +{ + void __iomem *isr_reg = NULL; + u32 isr; + unsigned int gpio_irq, gpio_index; + struct gpio_bank *bank; + u32 retrigger = 0; + int unmasked = 0; + struct irq_chip *chip = irq_desc_get_chip(desc); + + chained_irq_enter(chip, desc); + + bank = irq_get_handler_data(irq); +#ifdef CONFIG_ARCH_OMAP1 + if (bank->method == METHOD_MPUIO) + isr_reg = bank->base + + OMAP_MPUIO_GPIO_INT / bank->stride; +#endif +#ifdef CONFIG_ARCH_OMAP15XX + if (bank->method == METHOD_GPIO_1510) + isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS; +#endif +#if defined(CONFIG_ARCH_OMAP16XX) + if (bank->method == METHOD_GPIO_1610) + isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; +#endif +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (bank->method == METHOD_GPIO_7XX) + isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + if (bank->method == METHOD_GPIO_24XX) + isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; +#endif +#if defined(CONFIG_ARCH_OMAP4) + if (bank->method == METHOD_GPIO_44XX) + isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0; +#endif + + if (WARN_ON(!isr_reg)) + goto exit; + + while(1) { + u32 isr_saved, level_mask = 0; + u32 enabled; + + enabled = _get_gpio_irqbank_mask(bank); + isr_saved = isr = __raw_readl(isr_reg) & enabled; + + if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO)) + isr &= 0x0000ffff; + + if (cpu_class_is_omap2()) { + level_mask = bank->level_mask & enabled; + } + + /* clear edge sensitive interrupts before handler(s) are + called so that we don't miss any interrupt occurred while + executing them */ + _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0); + _clear_gpio_irqbank(bank, isr_saved & ~level_mask); + _enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1); + + /* if there is only edge sensitive GPIO pin interrupts + configured, we could unmask GPIO bank interrupt immediately */ + if (!level_mask && !unmasked) { + unmasked = 1; + chained_irq_exit(chip, desc); + } + + isr |= retrigger; + retrigger = 0; + if (!isr) + break; + + gpio_irq = bank->virtual_irq_start; + for (; isr != 0; isr >>= 1, gpio_irq++) { + gpio_index = get_gpio_index(irq_to_gpio(gpio_irq)); + + if (!(isr & 1)) + continue; + +#ifdef CONFIG_ARCH_OMAP1 + /* + * Some chips can't respond to both rising and falling + * at the same time. If this irq was requested with + * both flags, we need to flip the ICR data for the IRQ + * to respond to the IRQ for the opposite direction. + * This will be indicated in the bank toggle_mask. + */ + if (bank->toggle_mask & (1 << gpio_index)) + _toggle_gpio_edge_triggering(bank, gpio_index); +#endif + + generic_handle_irq(gpio_irq); + } + } + /* if bank has any level sensitive GPIO pin interrupt + configured, we must unmask the bank interrupt only after + handler(s) are executed in order to avoid spurious bank + interrupt */ +exit: + if (!unmasked) + chained_irq_exit(chip, desc); +} + +static void gpio_irq_shutdown(struct irq_data *d) +{ + unsigned int gpio = d->irq - IH_GPIO_BASE; + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + + _reset_gpio(bank, gpio); +} + +static void gpio_ack_irq(struct irq_data *d) +{ + unsigned int gpio = d->irq - IH_GPIO_BASE; + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + + _clear_gpio_irqstatus(bank, gpio); +} + +static void gpio_mask_irq(struct irq_data *d) +{ + unsigned int gpio = d->irq - IH_GPIO_BASE; + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + + _set_gpio_irqenable(bank, gpio, 0); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); +} + +static void gpio_unmask_irq(struct irq_data *d) +{ + unsigned int gpio = d->irq - IH_GPIO_BASE; + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + unsigned int irq_mask = 1 << get_gpio_index(gpio); + u32 trigger = irqd_get_trigger_type(d); + + if (trigger) + _set_gpio_triggering(bank, get_gpio_index(gpio), trigger); + + /* For level-triggered GPIOs, the clearing must be done after + * the HW source is cleared, thus after the handler has run */ + if (bank->level_mask & irq_mask) { + _set_gpio_irqenable(bank, gpio, 0); + _clear_gpio_irqstatus(bank, gpio); + } + + _set_gpio_irqenable(bank, gpio, 1); +} + +static struct irq_chip gpio_irq_chip = { + .name = "GPIO", + .irq_shutdown = gpio_irq_shutdown, + .irq_ack = gpio_ack_irq, + .irq_mask = gpio_mask_irq, + .irq_unmask = gpio_unmask_irq, + .irq_set_type = gpio_irq_type, + .irq_set_wake = gpio_wake_enable, +}; + +/*---------------------------------------------------------------------*/ + +#ifdef CONFIG_ARCH_OMAP1 + +/* MPUIO uses the always-on 32k clock */ + +static void mpuio_ack_irq(struct irq_data *d) +{ + /* The ISR is reset automatically, so do nothing here. */ +} + +static void mpuio_mask_irq(struct irq_data *d) +{ + unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + + _set_gpio_irqenable(bank, gpio, 0); +} + +static void mpuio_unmask_irq(struct irq_data *d) +{ + unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE); + struct gpio_bank *bank = irq_data_get_irq_chip_data(d); + + _set_gpio_irqenable(bank, gpio, 1); +} + +static struct irq_chip mpuio_irq_chip = { + .name = "MPUIO", + .irq_ack = mpuio_ack_irq, + .irq_mask = mpuio_mask_irq, + .irq_unmask = mpuio_unmask_irq, + .irq_set_type = gpio_irq_type, +#ifdef CONFIG_ARCH_OMAP16XX + /* REVISIT: assuming only 16xx supports MPUIO wake events */ + .irq_set_wake = gpio_wake_enable, +#endif +}; + + +#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO) + + +#ifdef CONFIG_ARCH_OMAP16XX + +#include + +static int omap_mpuio_suspend_noirq(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + void __iomem *mask_reg = bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride; + unsigned long flags; + + spin_lock_irqsave(&bank->lock, flags); + bank->saved_wakeup = __raw_readl(mask_reg); + __raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg); + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static int omap_mpuio_resume_noirq(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_bank *bank = platform_get_drvdata(pdev); + void __iomem *mask_reg = bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride; + unsigned long flags; + + spin_lock_irqsave(&bank->lock, flags); + __raw_writel(bank->saved_wakeup, mask_reg); + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static const struct dev_pm_ops omap_mpuio_dev_pm_ops = { + .suspend_noirq = omap_mpuio_suspend_noirq, + .resume_noirq = omap_mpuio_resume_noirq, +}; + +/* use platform_driver for this. */ +static struct platform_driver omap_mpuio_driver = { + .driver = { + .name = "mpuio", + .pm = &omap_mpuio_dev_pm_ops, + }, +}; + +static struct platform_device omap_mpuio_device = { + .name = "mpuio", + .id = -1, + .dev = { + .driver = &omap_mpuio_driver.driver, + } + /* could list the /proc/iomem resources */ +}; + +static inline void mpuio_init(void) +{ + struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0)); + platform_set_drvdata(&omap_mpuio_device, bank); + + if (platform_driver_register(&omap_mpuio_driver) == 0) + (void) platform_device_register(&omap_mpuio_device); +} + +#else +static inline void mpuio_init(void) {} +#endif /* 16xx */ + +#else + +extern struct irq_chip mpuio_irq_chip; + +#define bank_is_mpuio(bank) 0 +static inline void mpuio_init(void) {} + +#endif + +/*---------------------------------------------------------------------*/ + +/* REVISIT these are stupid implementations! replace by ones that + * don't switch on METHOD_* and which mostly avoid spinlocks + */ + +static int gpio_input(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_direction(bank, offset, 1); + spin_unlock_irqrestore(&bank->lock, flags); + return 0; +} + +static int gpio_is_input(struct gpio_bank *bank, int mask) +{ + void __iomem *reg = bank->base; + + switch (bank->method) { + case METHOD_MPUIO: + reg += OMAP_MPUIO_IO_CNTL / bank->stride; + break; + case METHOD_GPIO_1510: + reg += OMAP1510_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_1610: + reg += OMAP1610_GPIO_DIRECTION; + break; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; + break; + case METHOD_GPIO_24XX: + reg += OMAP24XX_GPIO_OE; + break; + case METHOD_GPIO_44XX: + reg += OMAP4_GPIO_OE; + break; + default: + WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method"); + return -EINVAL; + } + return __raw_readl(reg) & mask; +} + +static int gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank; + void __iomem *reg; + int gpio; + u32 mask; + + gpio = chip->base + offset; + bank = get_gpio_bank(gpio); + reg = bank->base; + mask = 1 << get_gpio_index(gpio); + + if (gpio_is_input(bank, mask)) + return _get_gpio_datain(bank, gpio); + else + return _get_gpio_dataout(bank, gpio); +} + +static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_dataout(bank, offset, value); + _set_gpio_direction(bank, offset, 0); + spin_unlock_irqrestore(&bank->lock, flags); + return 0; +} + +static int gpio_debounce(struct gpio_chip *chip, unsigned offset, + unsigned debounce) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + + if (!bank->dbck) { + bank->dbck = clk_get(bank->dev, "dbclk"); + if (IS_ERR(bank->dbck)) + dev_err(bank->dev, "Could not get gpio dbck\n"); + } + + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_debounce(bank, offset, debounce); + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + +static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_dataout(bank, offset, value); + spin_unlock_irqrestore(&bank->lock, flags); +} + +static int gpio_2irq(struct gpio_chip *chip, unsigned offset) +{ + struct gpio_bank *bank; + + bank = container_of(chip, struct gpio_bank, chip); + return bank->virtual_irq_start + offset; +} + +/*---------------------------------------------------------------------*/ + +static void __init omap_gpio_show_rev(struct gpio_bank *bank) +{ + u32 rev; + + if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO)) + rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION); + else if (cpu_is_omap24xx() || cpu_is_omap34xx()) + rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION); + else if (cpu_is_omap44xx()) + rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION); + else + return; + + printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n", + (rev >> 4) & 0x0f, rev & 0x0f); +} + +/* This lock class tells lockdep that GPIO irqs are in a different + * category than their parents, so it won't report false recursion. + */ +static struct lock_class_key gpio_lock_class; + +static inline int init_gpio_info(struct platform_device *pdev) +{ + /* TODO: Analyze removing gpio_bank_count usage from driver code */ + gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank), + GFP_KERNEL); + if (!gpio_bank) { + dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n"); + return -ENOMEM; + } + return 0; +} + +/* TODO: Cleanup cpu_is_* checks */ +static void omap_gpio_mod_init(struct gpio_bank *bank, int id) +{ + if (cpu_class_is_omap2()) { + if (cpu_is_omap44xx()) { + __raw_writel(0xffffffff, bank->base + + OMAP4_GPIO_IRQSTATUSCLR0); + __raw_writel(0x00000000, bank->base + + OMAP4_GPIO_DEBOUNCENABLE); + /* Initialize interface clk ungated, module enabled */ + __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); + } else if (cpu_is_omap34xx()) { + __raw_writel(0x00000000, bank->base + + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(0xffffffff, bank->base + + OMAP24XX_GPIO_IRQSTATUS1); + __raw_writel(0x00000000, bank->base + + OMAP24XX_GPIO_DEBOUNCE_EN); + + /* Initialize interface clk ungated, module enabled */ + __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); + } else if (cpu_is_omap24xx()) { + static const u32 non_wakeup_gpios[] = { + 0xe203ffc0, 0x08700040 + }; + if (id < ARRAY_SIZE(non_wakeup_gpios)) + bank->non_wakeup_gpios = non_wakeup_gpios[id]; + } + } else if (cpu_class_is_omap1()) { + if (bank_is_mpuio(bank)) + __raw_writew(0xffff, bank->base + + OMAP_MPUIO_GPIO_MASKIT / bank->stride); + if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) { + __raw_writew(0xffff, bank->base + + OMAP1510_GPIO_INT_MASK); + __raw_writew(0x0000, bank->base + + OMAP1510_GPIO_INT_STATUS); + } + if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) { + __raw_writew(0x0000, bank->base + + OMAP1610_GPIO_IRQENABLE1); + __raw_writew(0xffff, bank->base + + OMAP1610_GPIO_IRQSTATUS1); + __raw_writew(0x0014, bank->base + + OMAP1610_GPIO_SYSCONFIG); + + /* + * Enable system clock for GPIO module. + * The CAM_CLK_CTRL *is* really the right place. + */ + omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, + ULPD_CAM_CLK_CTRL); + } + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { + __raw_writel(0xffffffff, bank->base + + OMAP7XX_GPIO_INT_MASK); + __raw_writel(0x00000000, bank->base + + OMAP7XX_GPIO_INT_STATUS); + } + } +} + +static void __init omap_gpio_chip_init(struct gpio_bank *bank) +{ + int j; + static int gpio; + + bank->mod_usage = 0; + /* + * REVISIT eventually switch from OMAP-specific gpio structs + * over to the generic ones + */ + bank->chip.request = omap_gpio_request; + bank->chip.free = omap_gpio_free; + bank->chip.direction_input = gpio_input; + bank->chip.get = gpio_get; + bank->chip.direction_output = gpio_output; + bank->chip.set_debounce = gpio_debounce; + bank->chip.set = gpio_set; + bank->chip.to_irq = gpio_2irq; + if (bank_is_mpuio(bank)) { + bank->chip.label = "mpuio"; +#ifdef CONFIG_ARCH_OMAP16XX + bank->chip.dev = &omap_mpuio_device.dev; +#endif + bank->chip.base = OMAP_MPUIO(0); + } else { + bank->chip.label = "gpio"; + bank->chip.base = gpio; + gpio += bank_width; + } + bank->chip.ngpio = bank_width; + + gpiochip_add(&bank->chip); + + for (j = bank->virtual_irq_start; + j < bank->virtual_irq_start + bank_width; j++) { + irq_set_lockdep_class(j, &gpio_lock_class); + irq_set_chip_data(j, bank); + if (bank_is_mpuio(bank)) + irq_set_chip(j, &mpuio_irq_chip); + else + irq_set_chip(j, &gpio_irq_chip); + irq_set_handler(j, handle_simple_irq); + set_irq_flags(j, IRQF_VALID); + } + irq_set_chained_handler(bank->irq, gpio_irq_handler); + irq_set_handler_data(bank->irq, bank); +} + +static int __devinit omap_gpio_probe(struct platform_device *pdev) +{ + static int gpio_init_done; + struct omap_gpio_platform_data *pdata; + struct resource *res; + int id; + struct gpio_bank *bank; + + if (!pdev->dev.platform_data) + return -EINVAL; + + pdata = pdev->dev.platform_data; + + if (!gpio_init_done) { + int ret; + + ret = init_gpio_info(pdev); + if (ret) + return ret; + } + + id = pdev->id; + bank = &gpio_bank[id]; + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id); + return -ENODEV; + } + + bank->irq = res->start; + bank->virtual_irq_start = pdata->virtual_irq_start; + bank->method = pdata->bank_type; + bank->dev = &pdev->dev; + bank->dbck_flag = pdata->dbck_flag; + bank->stride = pdata->bank_stride; + bank_width = pdata->bank_width; + + spin_lock_init(&bank->lock); + + /* Static mapping, never released */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (unlikely(!res)) { + dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id); + return -ENODEV; + } + + bank->base = ioremap(res->start, resource_size(res)); + if (!bank->base) { + dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id); + return -ENOMEM; + } + + pm_runtime_enable(bank->dev); + pm_runtime_get_sync(bank->dev); + + omap_gpio_mod_init(bank, id); + omap_gpio_chip_init(bank); + omap_gpio_show_rev(bank); + + if (!gpio_init_done) + gpio_init_done = 1; + + return 0; +} + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) +static int omap_gpio_suspend(void) +{ + int i; + + if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) + return 0; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_status; + void __iomem *wake_clear; + void __iomem *wake_set; + unsigned long flags; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE; + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; + wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; + break; +#endif + default: + continue; + } + + spin_lock_irqsave(&bank->lock, flags); + bank->saved_wakeup = __raw_readl(wake_status); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->suspend_wakeup, wake_set); + spin_unlock_irqrestore(&bank->lock, flags); + } + + return 0; +} + +static void omap_gpio_resume(void) +{ + int i; + + if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) + return; + + for (i = 0; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + void __iomem *wake_clear; + void __iomem *wake_set; + unsigned long flags; + + switch (bank->method) { +#ifdef CONFIG_ARCH_OMAP16XX + case METHOD_GPIO_1610: + wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA; + wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; + break; +#endif +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) + case METHOD_GPIO_24XX: + wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; + wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; + break; +#endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_44XX: + wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; + break; +#endif + default: + continue; + } + + spin_lock_irqsave(&bank->lock, flags); + __raw_writel(0xffffffff, wake_clear); + __raw_writel(bank->saved_wakeup, wake_set); + spin_unlock_irqrestore(&bank->lock, flags); + } +} + +static struct syscore_ops omap_gpio_syscore_ops = { + .suspend = omap_gpio_suspend, + .resume = omap_gpio_resume, +}; + +#endif + +#ifdef CONFIG_ARCH_OMAP2PLUS + +static int workaround_enabled; + +void omap2_gpio_prepare_for_idle(int off_mode) +{ + int i, c = 0; + int min = 0; + + if (cpu_is_omap34xx()) + min = 1; + + for (i = min; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + u32 l1 = 0, l2 = 0; + int j; + + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) + clk_disable(bank->dbck); + + if (!off_mode) + continue; + + /* If going to OFF, remove triggering for all + * non-wakeup GPIOs. Otherwise spurious IRQs will be + * generated. See OMAP2420 Errata item 1.101. */ + if (!(bank->enabled_non_wakeup_gpios)) + continue; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + bank->saved_datain = __raw_readl(bank->base + + OMAP24XX_GPIO_DATAIN); + l1 = __raw_readl(bank->base + + OMAP24XX_GPIO_FALLINGDETECT); + l2 = __raw_readl(bank->base + + OMAP24XX_GPIO_RISINGDETECT); + } + + if (cpu_is_omap44xx()) { + bank->saved_datain = __raw_readl(bank->base + + OMAP4_GPIO_DATAIN); + l1 = __raw_readl(bank->base + + OMAP4_GPIO_FALLINGDETECT); + l2 = __raw_readl(bank->base + + OMAP4_GPIO_RISINGDETECT); + } + + bank->saved_fallingdetect = l1; + bank->saved_risingdetect = l2; + l1 &= ~bank->enabled_non_wakeup_gpios; + l2 &= ~bank->enabled_non_wakeup_gpios; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + __raw_writel(l1, bank->base + + OMAP24XX_GPIO_FALLINGDETECT); + __raw_writel(l2, bank->base + + OMAP24XX_GPIO_RISINGDETECT); + } + + if (cpu_is_omap44xx()) { + __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); + __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); + } + + c++; + } + if (!c) { + workaround_enabled = 0; + return; + } + workaround_enabled = 1; +} + +void omap2_gpio_resume_after_idle(void) +{ + int i; + int min = 0; + + if (cpu_is_omap34xx()) + min = 1; + for (i = min; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + u32 l = 0, gen, gen0, gen1; + int j; + + for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++) + clk_enable(bank->dbck); + + if (!workaround_enabled) + continue; + + if (!(bank->enabled_non_wakeup_gpios)) + continue; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + __raw_writel(bank->saved_fallingdetect, + bank->base + OMAP24XX_GPIO_FALLINGDETECT); + __raw_writel(bank->saved_risingdetect, + bank->base + OMAP24XX_GPIO_RISINGDETECT); + l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); + } + + if (cpu_is_omap44xx()) { + __raw_writel(bank->saved_fallingdetect, + bank->base + OMAP4_GPIO_FALLINGDETECT); + __raw_writel(bank->saved_risingdetect, + bank->base + OMAP4_GPIO_RISINGDETECT); + l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); + } + + /* Check if any of the non-wakeup interrupt GPIOs have changed + * state. If so, generate an IRQ by software. This is + * horribly racy, but it's the best we can do to work around + * this silicon bug. */ + l ^= bank->saved_datain; + l &= bank->enabled_non_wakeup_gpios; + + /* + * No need to generate IRQs for the rising edge for gpio IRQs + * configured with falling edge only; and vice versa. + */ + gen0 = l & bank->saved_fallingdetect; + gen0 &= bank->saved_datain; + + gen1 = l & bank->saved_risingdetect; + gen1 &= ~(bank->saved_datain); + + /* FIXME: Consider GPIO IRQs with level detections properly! */ + gen = l & (~(bank->saved_fallingdetect) & + ~(bank->saved_risingdetect)); + /* Consider all GPIO IRQs needed to be updated */ + gen |= gen0 | gen1; + + if (gen) { + u32 old0, old1; + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + old0 = __raw_readl(bank->base + + OMAP24XX_GPIO_LEVELDETECT0); + old1 = __raw_readl(bank->base + + OMAP24XX_GPIO_LEVELDETECT1); + __raw_writel(old0 | gen, bank->base + + OMAP24XX_GPIO_LEVELDETECT0); + __raw_writel(old1 | gen, bank->base + + OMAP24XX_GPIO_LEVELDETECT1); + __raw_writel(old0, bank->base + + OMAP24XX_GPIO_LEVELDETECT0); + __raw_writel(old1, bank->base + + OMAP24XX_GPIO_LEVELDETECT1); + } + + if (cpu_is_omap44xx()) { + old0 = __raw_readl(bank->base + + OMAP4_GPIO_LEVELDETECT0); + old1 = __raw_readl(bank->base + + OMAP4_GPIO_LEVELDETECT1); + __raw_writel(old0 | l, bank->base + + OMAP4_GPIO_LEVELDETECT0); + __raw_writel(old1 | l, bank->base + + OMAP4_GPIO_LEVELDETECT1); + __raw_writel(old0, bank->base + + OMAP4_GPIO_LEVELDETECT0); + __raw_writel(old1, bank->base + + OMAP4_GPIO_LEVELDETECT1); + } + } + } + +} + +#endif + +#ifdef CONFIG_ARCH_OMAP3 +/* save the registers of bank 2-6 */ +void omap_gpio_save_context(void) +{ + int i; + + /* saving banks from 2-6 only since GPIO1 is in WKUP */ + for (i = 1; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + gpio_context[i].irqenable1 = + __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1); + gpio_context[i].irqenable2 = + __raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2); + gpio_context[i].wake_en = + __raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN); + gpio_context[i].ctrl = + __raw_readl(bank->base + OMAP24XX_GPIO_CTRL); + gpio_context[i].oe = + __raw_readl(bank->base + OMAP24XX_GPIO_OE); + gpio_context[i].leveldetect0 = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); + gpio_context[i].leveldetect1 = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + gpio_context[i].risingdetect = + __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); + gpio_context[i].fallingdetect = + __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); + gpio_context[i].dataout = + __raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT); + } +} + +/* restore the required registers of bank 2-6 */ +void omap_gpio_restore_context(void) +{ + int i; + + for (i = 1; i < gpio_bank_count; i++) { + struct gpio_bank *bank = &gpio_bank[i]; + __raw_writel(gpio_context[i].irqenable1, + bank->base + OMAP24XX_GPIO_IRQENABLE1); + __raw_writel(gpio_context[i].irqenable2, + bank->base + OMAP24XX_GPIO_IRQENABLE2); + __raw_writel(gpio_context[i].wake_en, + bank->base + OMAP24XX_GPIO_WAKE_EN); + __raw_writel(gpio_context[i].ctrl, + bank->base + OMAP24XX_GPIO_CTRL); + __raw_writel(gpio_context[i].oe, + bank->base + OMAP24XX_GPIO_OE); + __raw_writel(gpio_context[i].leveldetect0, + bank->base + OMAP24XX_GPIO_LEVELDETECT0); + __raw_writel(gpio_context[i].leveldetect1, + bank->base + OMAP24XX_GPIO_LEVELDETECT1); + __raw_writel(gpio_context[i].risingdetect, + bank->base + OMAP24XX_GPIO_RISINGDETECT); + __raw_writel(gpio_context[i].fallingdetect, + bank->base + OMAP24XX_GPIO_FALLINGDETECT); + __raw_writel(gpio_context[i].dataout, + bank->base + OMAP24XX_GPIO_DATAOUT); + } +} +#endif + +static struct platform_driver omap_gpio_driver = { + .probe = omap_gpio_probe, + .driver = { + .name = "omap_gpio", + }, +}; + +/* + * gpio driver register needs to be done before + * machine_init functions access gpio APIs. + * Hence omap_gpio_drv_reg() is a postcore_initcall. + */ +static int __init omap_gpio_drv_reg(void) +{ + return platform_driver_register(&omap_gpio_driver); +} +postcore_initcall(omap_gpio_drv_reg); + +static int __init omap_gpio_sysinit(void) +{ + mpuio_init(); + +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS) + if (cpu_is_omap16xx() || cpu_class_is_omap2()) + register_syscore_ops(&omap_gpio_syscore_ops); +#endif + + return 0; +} + +arch_initcall(omap_gpio_sysinit); -- cgit v1.2.3 From 39ddf3bf6463bc86041e806b43e014d50a144aa4 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:32 -0700 Subject: asus-wmi: Remove __init from asus_wmi_platform_init It's used by a non-init function. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/asus-wmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 832a3fd7c1c8..c8c9842753dc 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1223,7 +1223,7 @@ static int asus_wmi_sysfs_init(struct platform_device *device) /* * Platform device */ -static int __init asus_wmi_platform_init(struct asus_wmi *asus) +static int asus_wmi_platform_init(struct asus_wmi *asus) { int rv; -- cgit v1.2.3 From 3a35125f97be0658305c9509c51077959c19b244 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:33 -0700 Subject: ibm_rtl: Remove warnings from casts of pointer to int Just print them as %p. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/ibm_rtl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index b1396e5b2953..10563458408c 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -288,7 +288,7 @@ static int __init ibm_rtl_init(void) { if ((readq(&tmp->signature) & RTL_MASK) == RTL_SIGNATURE) { phys_addr_t addr; unsigned int plen; - RTL_DEBUG("found RTL_SIGNATURE at %#llx\n", (u64)tmp); + RTL_DEBUG("found RTL_SIGNATURE at %p\n", tmp); rtl_table = tmp; /* The address, value, width and offset are platform * dependent and found in the ibm_rtl_table */ @@ -300,7 +300,7 @@ static int __init ibm_rtl_init(void) { RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr); plen = rtl_cmd_width/sizeof(char); rtl_cmd_addr = rtl_port_map(addr, plen); - RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr); + RTL_DEBUG("rtl_cmd_addr = %p\n", rtl_cmd_addr); if (!rtl_cmd_addr) { ret = -ENOMEM; break; -- cgit v1.2.3 From 249c720d88fa325522cb763dda09f8c9e8e964cb Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:34 -0700 Subject: acer-wmi: pr_ cleanups Convert pr_warning to pr_warn. Add some missing newlines to pr_ uses. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/acer-wmi.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index ac4e7f83ce6c..fa8fa73f543e 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -1081,7 +1081,7 @@ static acpi_status wmid3_get_device_status(u32 *value, u16 device) return AE_ERROR; } if (obj->buffer.length != 8) { - pr_warning("Unknown buffer length %d\n", obj->buffer.length); + pr_warn("Unknown buffer length %d\n", obj->buffer.length); kfree(obj); return AE_ERROR; } @@ -1090,8 +1090,8 @@ static acpi_status wmid3_get_device_status(u32 *value, u16 device) kfree(obj); if (return_value.error_code || return_value.ec_return_value) - pr_warning("Get Device Status failed: " - "0x%x - 0x%x\n", return_value.error_code, + pr_warn("Get Device Status failed: 0x%x - 0x%x\n", + return_value.error_code, return_value.ec_return_value); else *value = !!(return_value.devices & device); @@ -1317,7 +1317,7 @@ static void acer_wmi_notify(u32 value, void *context) status = wmi_get_event_data(value, &response); if (status != AE_OK) { - pr_warning("bad event status 0x%x\n", status); + pr_warn("bad event status 0x%x\n", status); return; } @@ -1326,12 +1326,12 @@ static void acer_wmi_notify(u32 value, void *context) if (!obj) return; if (obj->type != ACPI_TYPE_BUFFER) { - pr_warning("Unknown response received %d\n", obj->type); + pr_warn("Unknown response received %d\n", obj->type); kfree(obj); return; } if (obj->buffer.length != 8) { - pr_warning("Unknown buffer length %d\n", obj->buffer.length); + pr_warn("Unknown buffer length %d\n", obj->buffer.length); kfree(obj); return; } @@ -1356,11 +1356,11 @@ static void acer_wmi_notify(u32 value, void *context) } if (!sparse_keymap_report_event(acer_wmi_input_dev, return_value.key_num, 1, true)) - pr_warning("Unknown key number - 0x%x\n", + pr_warn("Unknown key number - 0x%x\n", return_value.key_num); break; default: - pr_warning("Unknown function number - %d - %d\n", + pr_warn("Unknown function number - %d - %d\n", return_value.function, return_value.key_num); break; } @@ -1389,7 +1389,7 @@ wmid3_set_lm_mode(struct lm_input_params *params, return AE_ERROR; } if (obj->buffer.length != 4) { - pr_warning("Unknown buffer length %d\n", obj->buffer.length); + pr_warn("Unknown buffer length %d\n", obj->buffer.length); kfree(obj); return AE_ERROR; } @@ -1414,11 +1414,11 @@ static int acer_wmi_enable_ec_raw(void) status = wmid3_set_lm_mode(¶ms, &return_value); if (return_value.error_code || return_value.ec_return_value) - pr_warning("Enabling EC raw mode failed: " - "0x%x - 0x%x\n", return_value.error_code, - return_value.ec_return_value); + pr_warn("Enabling EC raw mode failed: 0x%x - 0x%x\n", + return_value.error_code, + return_value.ec_return_value); else - pr_info("Enabled EC raw mode"); + pr_info("Enabled EC raw mode\n"); return status; } @@ -1437,9 +1437,9 @@ static int acer_wmi_enable_lm(void) status = wmid3_set_lm_mode(¶ms, &return_value); if (return_value.error_code || return_value.ec_return_value) - pr_warning("Enabling Launch Manager failed: " - "0x%x - 0x%x\n", return_value.error_code, - return_value.ec_return_value); + pr_warn("Enabling Launch Manager failed: 0x%x - 0x%x\n", + return_value.error_code, + return_value.ec_return_value); return status; } -- cgit v1.2.3 From 5ad77dcfb49a85715bcb9174a133cba140eda1bc Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:35 -0700 Subject: asus: Add pr_fmt and convert printks to pr_ Add pr_fmt, prefixes each log message. Convert printks to pr_. Convert pr_warning to pr_warn. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/asus-laptop.c | 34 ++++++++--------- drivers/platform/x86/asus-wmi.c | 20 +++++----- drivers/platform/x86/asus_acpi.c | 77 ++++++++++++++++---------------------- 3 files changed, 59 insertions(+), 72 deletions(-) diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index c53b3ff7978a..d65df92e2acc 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -318,7 +318,7 @@ static int acpi_check_handle(acpi_handle handle, const char *method, if (status != AE_OK) { if (ret) - pr_warning("Error finding %s\n", method); + pr_warn("Error finding %s\n", method); return -ENODEV; } return 0; @@ -383,7 +383,7 @@ static int asus_kled_lvl(struct asus_laptop *asus) rv = acpi_evaluate_integer(asus->handle, METHOD_KBD_LIGHT_GET, ¶ms, &kblv); if (ACPI_FAILURE(rv)) { - pr_warning("Error reading kled level\n"); + pr_warn("Error reading kled level\n"); return -ENODEV; } return kblv; @@ -397,7 +397,7 @@ static int asus_kled_set(struct asus_laptop *asus, int kblv) kblv = 0; if (write_acpi_int(asus->handle, METHOD_KBD_LIGHT_SET, kblv)) { - pr_warning("Keyboard LED display write failed\n"); + pr_warn("Keyboard LED display write failed\n"); return -EINVAL; } return 0; @@ -531,7 +531,7 @@ static int asus_read_brightness(struct backlight_device *bd) rv = acpi_evaluate_integer(asus->handle, METHOD_BRIGHTNESS_GET, NULL, &value); if (ACPI_FAILURE(rv)) - pr_warning("Error reading brightness\n"); + pr_warn("Error reading brightness\n"); return value; } @@ -541,7 +541,7 @@ static int asus_set_brightness(struct backlight_device *bd, int value) struct asus_laptop *asus = bl_get_data(bd); if (write_acpi_int(asus->handle, METHOD_BRIGHTNESS_SET, value)) { - pr_warning("Error changing brightness\n"); + pr_warn("Error changing brightness\n"); return -EIO; } return 0; @@ -730,7 +730,7 @@ static ssize_t store_ledd(struct device *dev, struct device_attribute *attr, rv = parse_arg(buf, count, &value); if (rv > 0) { if (write_acpi_int(asus->handle, METHOD_LEDD, value)) { - pr_warning("LED display write failed\n"); + pr_warn("LED display write failed\n"); return -ENODEV; } asus->ledd_status = (u32) value; @@ -752,7 +752,7 @@ static int asus_wireless_status(struct asus_laptop *asus, int mask) rv = acpi_evaluate_integer(asus->handle, METHOD_WL_STATUS, NULL, &status); if (ACPI_FAILURE(rv)) { - pr_warning("Error reading Wireless status\n"); + pr_warn("Error reading Wireless status\n"); return -EINVAL; } return !!(status & mask); @@ -764,7 +764,7 @@ static int asus_wireless_status(struct asus_laptop *asus, int mask) static int asus_wlan_set(struct asus_laptop *asus, int status) { if (write_acpi_int(asus->handle, METHOD_WLAN, !!status)) { - pr_warning("Error setting wlan status to %d", status); + pr_warn("Error setting wlan status to %d\n", status); return -EIO; } return 0; @@ -792,7 +792,7 @@ static ssize_t store_wlan(struct device *dev, struct device_attribute *attr, static int asus_bluetooth_set(struct asus_laptop *asus, int status) { if (write_acpi_int(asus->handle, METHOD_BLUETOOTH, !!status)) { - pr_warning("Error setting bluetooth status to %d", status); + pr_warn("Error setting bluetooth status to %d\n", status); return -EIO; } return 0; @@ -821,7 +821,7 @@ static ssize_t store_bluetooth(struct device *dev, static int asus_wimax_set(struct asus_laptop *asus, int status) { if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) { - pr_warning("Error setting wimax status to %d", status); + pr_warn("Error setting wimax status to %d\n", status); return -EIO; } return 0; @@ -850,7 +850,7 @@ static ssize_t store_wimax(struct device *dev, static int asus_wwan_set(struct asus_laptop *asus, int status) { if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) { - pr_warning("Error setting wwan status to %d", status); + pr_warn("Error setting wwan status to %d\n", status); return -EIO; } return 0; @@ -880,7 +880,7 @@ static void asus_set_display(struct asus_laptop *asus, int value) { /* no sanity check needed for now */ if (write_acpi_int(asus->handle, METHOD_SWITCH_DISPLAY, value)) - pr_warning("Error setting display\n"); + pr_warn("Error setting display\n"); return; } @@ -909,7 +909,7 @@ static ssize_t store_disp(struct device *dev, struct device_attribute *attr, static void asus_als_switch(struct asus_laptop *asus, int value) { if (write_acpi_int(asus->handle, METHOD_ALS_CONTROL, value)) - pr_warning("Error setting light sensor switch\n"); + pr_warn("Error setting light sensor switch\n"); asus->light_switch = value; } @@ -937,7 +937,7 @@ static ssize_t store_lssw(struct device *dev, struct device_attribute *attr, static void asus_als_level(struct asus_laptop *asus, int value) { if (write_acpi_int(asus->handle, METHOD_ALS_LEVEL, value)) - pr_warning("Error setting light sensor level\n"); + pr_warn("Error setting light sensor level\n"); asus->light_level = value; } @@ -976,7 +976,7 @@ static int asus_gps_status(struct asus_laptop *asus) rv = acpi_evaluate_integer(asus->handle, METHOD_GPS_STATUS, NULL, &status); if (ACPI_FAILURE(rv)) { - pr_warning("Error reading GPS status\n"); + pr_warn("Error reading GPS status\n"); return -ENODEV; } return !!status; @@ -1284,7 +1284,7 @@ static int asus_laptop_get_info(struct asus_laptop *asus) */ status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus->dsdt_info); if (ACPI_FAILURE(status)) - pr_warning("Couldn't get the DSDT table header\n"); + pr_warn("Couldn't get the DSDT table header\n"); /* We have to write 0 on init this far for all ASUS models */ if (write_acpi_int_ret(asus->handle, "INIT", 0, &buffer)) { @@ -1296,7 +1296,7 @@ static int asus_laptop_get_info(struct asus_laptop *asus) status = acpi_evaluate_integer(asus->handle, "BSTS", NULL, &bsts_result); if (ACPI_FAILURE(status)) - pr_warning("Error calling BSTS\n"); + pr_warn("Error calling BSTS\n"); else if (bsts_result) pr_notice("BSTS called, 0x%02x returned\n", (uint) bsts_result); diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index c8c9842753dc..00460cb9587b 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -425,7 +425,7 @@ static void asus_rfkill_hotplug(struct asus_wmi *asus) if (asus->hotplug_slot) { bus = pci_find_bus(0, 1); if (!bus) { - pr_warning("Unable to find PCI bus 1?\n"); + pr_warn("Unable to find PCI bus 1?\n"); goto out_unlock; } @@ -436,12 +436,12 @@ static void asus_rfkill_hotplug(struct asus_wmi *asus) absent = (l == 0xffffffff); if (blocked != absent) { - pr_warning("BIOS says wireless lan is %s, " - "but the pci device is %s\n", - blocked ? "blocked" : "unblocked", - absent ? "absent" : "present"); - pr_warning("skipped wireless hotplug as probably " - "inappropriate for this model\n"); + pr_warn("BIOS says wireless lan is %s, " + "but the pci device is %s\n", + blocked ? "blocked" : "unblocked", + absent ? "absent" : "present"); + pr_warn("skipped wireless hotplug as probably " + "inappropriate for this model\n"); goto out_unlock; } @@ -500,7 +500,7 @@ static int asus_register_rfkill_notifier(struct asus_wmi *asus, char *node) ACPI_SYSTEM_NOTIFY, asus_rfkill_notify, asus); if (ACPI_FAILURE(status)) - pr_warning("Failed to register notify on %s\n", node); + pr_warn("Failed to register notify on %s\n", node); } else return -ENODEV; @@ -1583,12 +1583,12 @@ static int asus_wmi_probe(struct platform_device *pdev) int ret; if (!wmi_has_guid(ASUS_WMI_MGMT_GUID)) { - pr_warning("Management GUID not found\n"); + pr_warn("Management GUID not found\n"); return -ENODEV; } if (wdrv->event_guid && !wmi_has_guid(wdrv->event_guid)) { - pr_warning("Event GUID not found\n"); + pr_warn("Event GUID not found\n"); return -ENODEV; } diff --git a/drivers/platform/x86/asus_acpi.c b/drivers/platform/x86/asus_acpi.c index f503607c0645..d9312b3073e5 100644 --- a/drivers/platform/x86/asus_acpi.c +++ b/drivers/platform/x86/asus_acpi.c @@ -30,6 +30,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -581,8 +583,7 @@ static int read_led(const char *ledname, int ledmask) if (read_acpi_int(NULL, ledname, &led_status)) return led_status; else - printk(KERN_WARNING "Asus ACPI: Error reading LED " - "status\n"); + pr_warn("Error reading LED status\n"); } return (hotk->status & ledmask) ? 1 : 0; } @@ -621,8 +622,7 @@ write_led(const char __user *buffer, unsigned long count, led_out = !led_out; if (!write_acpi_int(hotk->handle, ledname, led_out, NULL)) - printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n", - ledname); + pr_warn("LED (%s) write failed\n", ledname); return rv; } @@ -679,8 +679,7 @@ static ssize_t ledd_proc_write(struct file *file, const char __user *buffer, if (rv > 0) { if (!write_acpi_int (hotk->handle, hotk->methods->mt_ledd, value, NULL)) - printk(KERN_WARNING - "Asus ACPI: LED display write failed\n"); + pr_warn("LED display write failed\n"); else hotk->ledd_status = (u32) value; } @@ -838,8 +837,7 @@ static int get_lcd_state(void) } else { /* We don't have to check anything if we are here */ if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd)) - printk(KERN_WARNING - "Asus ACPI: Error reading LCD status\n"); + pr_warn("Error reading LCD status\n"); if (hotk->model == L2D) lcd = ~lcd; @@ -871,7 +869,7 @@ static int set_lcd_state(int value) the exact behaviour is simulated here */ } if (ACPI_FAILURE(status)) - printk(KERN_WARNING "Asus ACPI: Error switching LCD\n"); + pr_warn("Error switching LCD\n"); } return 0; @@ -915,13 +913,11 @@ static int read_brightness(struct backlight_device *bd) if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */ if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get, &value)) - printk(KERN_WARNING - "Asus ACPI: Error reading brightness\n"); + pr_warn("Error reading brightness\n"); } else if (hotk->methods->brightness_status) { /* For D1 for example */ if (!read_acpi_int(NULL, hotk->methods->brightness_status, &value)) - printk(KERN_WARNING - "Asus ACPI: Error reading brightness\n"); + pr_warn("Error reading brightness\n"); } else /* No GPLV method */ value = hotk->brightness; return value; @@ -939,8 +935,7 @@ static int set_brightness(int value) if (hotk->methods->brightness_set) { if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set, value, NULL)) { - printk(KERN_WARNING - "Asus ACPI: Error changing brightness\n"); + pr_warn("Error changing brightness\n"); ret = -EIO; } goto out; @@ -955,8 +950,7 @@ static int set_brightness(int value) NULL, NULL); (value > 0) ? value-- : value++; if (ACPI_FAILURE(status)) { - printk(KERN_WARNING - "Asus ACPI: Error changing brightness\n"); + pr_warn("Error changing brightness\n"); ret = -EIO; } } @@ -1008,7 +1002,7 @@ static void set_display(int value) /* no sanity check needed for now */ if (!write_acpi_int(hotk->handle, hotk->methods->display_set, value, NULL)) - printk(KERN_WARNING "Asus ACPI: Error setting display\n"); + pr_warn("Error setting display\n"); return; } @@ -1021,8 +1015,7 @@ static int disp_proc_show(struct seq_file *m, void *v) int value = 0; if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value)) - printk(KERN_WARNING - "Asus ACPI: Error reading display status\n"); + pr_warn("Error reading display status\n"); value &= 0x07; /* needed for some models, shouldn't hurt others */ seq_printf(m, "%d\n", value); return 0; @@ -1068,7 +1061,7 @@ asus_proc_add(char *name, const struct file_operations *proc_fops, mode_t mode, proc = proc_create_data(name, mode, acpi_device_dir(device), proc_fops, acpi_driver_data(device)); if (!proc) { - printk(KERN_WARNING " Unable to create %s fs entry\n", name); + pr_warn(" Unable to create %s fs entry\n", name); return -1; } proc->uid = asus_uid; @@ -1085,8 +1078,8 @@ static int asus_hotk_add_fs(struct acpi_device *device) mode = S_IFREG | S_IRUGO | S_IWUSR | S_IWGRP; } else { mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP; - printk(KERN_WARNING " asus_uid and asus_gid parameters are " - "deprecated, use chown and chmod instead!\n"); + pr_warn(" asus_uid and asus_gid parameters are " + "deprecated, use chown and chmod instead!\n"); } acpi_device_dir(device) = asus_proc_dir; @@ -1099,8 +1092,7 @@ static int asus_hotk_add_fs(struct acpi_device *device) proc->uid = asus_uid; proc->gid = asus_gid; } else { - printk(KERN_WARNING " Unable to create " PROC_INFO - " fs entry\n"); + pr_warn(" Unable to create " PROC_INFO " fs entry\n"); } if (hotk->methods->mt_wled) { @@ -1283,20 +1275,19 @@ static int asus_hotk_get_info(void) */ status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info); if (ACPI_FAILURE(status)) - printk(KERN_WARNING " Couldn't get the DSDT table header\n"); + pr_warn(" Couldn't get the DSDT table header\n"); /* We have to write 0 on init this far for all ASUS models */ if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) { - printk(KERN_ERR " Hotkey initialization failed\n"); + pr_err(" Hotkey initialization failed\n"); return -ENODEV; } /* This needs to be called for some laptops to init properly */ if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result)) - printk(KERN_WARNING " Error calling BSTS\n"); + pr_warn(" Error calling BSTS\n"); else if (bsts_result) - printk(KERN_NOTICE " BSTS called, 0x%02x returned\n", - bsts_result); + pr_notice(" BSTS called, 0x%02x returned\n", bsts_result); /* * Try to match the object returned by INIT to the specific model. @@ -1324,23 +1315,21 @@ static int asus_hotk_get_info(void) if (asus_info && strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) { hotk->model = P30; - printk(KERN_NOTICE - " Samsung P30 detected, supported\n"); + pr_notice(" Samsung P30 detected, supported\n"); hotk->methods = &model_conf[hotk->model]; kfree(model); return 0; } else { hotk->model = M2E; - printk(KERN_NOTICE " unsupported model %s, trying " - "default values\n", string); - printk(KERN_NOTICE - " send /proc/acpi/dsdt to the developers\n"); + pr_notice(" unsupported model %s, trying default values\n", + string); + pr_notice(" send /proc/acpi/dsdt to the developers\n"); kfree(model); return -ENODEV; } } hotk->methods = &model_conf[hotk->model]; - printk(KERN_NOTICE " %s model detected, supported\n", string); + pr_notice(" %s model detected, supported\n", string); /* Sort of per-model blacklist */ if (strncmp(string, "L2B", 3) == 0) @@ -1385,7 +1374,7 @@ static int asus_hotk_check(void) if (hotk->device->status.present) { result = asus_hotk_get_info(); } else { - printk(KERN_ERR " Hotkey device not present, aborting\n"); + pr_err(" Hotkey device not present, aborting\n"); return -EINVAL; } @@ -1399,8 +1388,7 @@ static int asus_hotk_add(struct acpi_device *device) acpi_status status = AE_OK; int result; - printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n", - ASUS_ACPI_VERSION); + pr_notice("Asus Laptop ACPI Extras version %s\n", ASUS_ACPI_VERSION); hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL); if (!hotk) @@ -1428,15 +1416,14 @@ static int asus_hotk_add(struct acpi_device *device) acpi_evaluate_object(NULL, hotk->methods->brightness_down, NULL, NULL); if (ACPI_FAILURE(status)) - printk(KERN_WARNING " Error changing brightness\n"); + pr_warn(" Error changing brightness\n"); else { status = acpi_evaluate_object(NULL, hotk->methods->brightness_up, NULL, NULL); if (ACPI_FAILURE(status)) - printk(KERN_WARNING " Strange, error changing" - " brightness\n"); + pr_warn(" Strange, error changing brightness\n"); } } @@ -1488,7 +1475,7 @@ static int __init asus_acpi_init(void) asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir); if (!asus_proc_dir) { - printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n"); + pr_err("Unable to create /proc entry\n"); acpi_bus_unregister_driver(&asus_hotk_driver); return -ENODEV; } @@ -1513,7 +1500,7 @@ static int __init asus_acpi_init(void) &asus_backlight_data, &props); if (IS_ERR(asus_backlight_device)) { - printk(KERN_ERR "Could not register asus backlight device\n"); + pr_err("Could not register asus backlight device\n"); asus_backlight_device = NULL; asus_acpi_exit(); return -ENODEV; -- cgit v1.2.3 From b4a4bc0bd1328b587a905e346d8494f9b9423cc5 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:36 -0700 Subject: compal-laptop: Convert printks to pr_ Add pr_fmt. Convert printks to pr_ removing DRIVER_NAME prefix. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/compal-laptop.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-) diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index c16a27641ced..4c4a7422c5e8 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -68,6 +68,8 @@ * only enabled on a JHL90 board until it is verified that they work on the * other boards too. See the extra_features variable. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -760,16 +762,14 @@ static struct rfkill *bt_rfkill; static int dmi_check_cb(const struct dmi_system_id *id) { - printk(KERN_INFO DRIVER_NAME": Identified laptop model '%s'\n", - id->ident); + pr_info("Identified laptop model '%s'\n", id->ident); extra_features = false; return 1; } static int dmi_check_cb_extra(const struct dmi_system_id *id) { - printk(KERN_INFO DRIVER_NAME": Identified laptop model '%s', " - "enabling extra features\n", + pr_info("Identified laptop model '%s', enabling extra features\n", id->ident); extra_features = true; return 1; @@ -956,14 +956,12 @@ static int __init compal_init(void) int ret; if (acpi_disabled) { - printk(KERN_ERR DRIVER_NAME": ACPI needs to be enabled for " - "this driver to work!\n"); + pr_err("ACPI needs to be enabled for this driver to work!\n"); return -ENODEV; } if (!force && !dmi_check_system(compal_dmi_table)) { - printk(KERN_ERR DRIVER_NAME": Motherboard not recognized (You " - "could try the module's force-parameter)"); + pr_err("Motherboard not recognized (You could try the module's force-parameter)\n"); return -ENODEV; } @@ -998,8 +996,7 @@ static int __init compal_init(void) if (ret) goto err_rfkill; - printk(KERN_INFO DRIVER_NAME": Driver "DRIVER_VERSION - " successfully loaded\n"); + pr_info("Driver " DRIVER_VERSION " successfully loaded\n"); return 0; err_rfkill: @@ -1064,7 +1061,7 @@ static void __exit compal_cleanup(void) rfkill_destroy(wifi_rfkill); rfkill_destroy(bt_rfkill); - printk(KERN_INFO DRIVER_NAME": Driver unloaded\n"); + pr_info("Driver unloaded\n"); } static int __devexit compal_remove(struct platform_device *pdev) @@ -1074,8 +1071,7 @@ static int __devexit compal_remove(struct platform_device *pdev) if (!extra_features) return 0; - printk(KERN_INFO DRIVER_NAME": Unloading: resetting fan control " - "to motherboard\n"); + pr_info("Unloading: resetting fan control to motherboard\n"); pwm_disable_control(); data = platform_get_drvdata(pdev); -- cgit v1.2.3 From eb8895241dfb6c26114928b186cc1810cbd57f1b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:37 -0700 Subject: dell: Convert printks to pr_ Add pr_fmt. Remove hard coded prefixes and use pr_. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 12 ++++++------ drivers/platform/x86/dell-wmi-aio.c | 3 ++- drivers/platform/x86/dell-wmi.c | 17 ++++++++--------- 3 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index de301aa8e5c3..d3841de6a8cf 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -11,6 +11,8 @@ * published by the Free Software Foundation. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -434,8 +436,7 @@ static int __init dell_setup_rfkill(void) int ret; if (dmi_check_system(dell_blacklist)) { - printk(KERN_INFO "dell-laptop: Blacklisted hardware detected - " - "not enabling rfkill\n"); + pr_info("Blacklisted hardware detected - not enabling rfkill\n"); return 0; } @@ -606,7 +607,7 @@ static int __init dell_init(void) dmi_walk(find_tokens, NULL); if (!da_tokens) { - printk(KERN_INFO "dell-laptop: Unable to find dmi tokens\n"); + pr_info("Unable to find dmi tokens\n"); return -ENODEV; } @@ -636,14 +637,13 @@ static int __init dell_init(void) ret = dell_setup_rfkill(); if (ret) { - printk(KERN_WARNING "dell-laptop: Unable to setup rfkill\n"); + pr_warn("Unable to setup rfkill\n"); goto fail_rfkill; } ret = i8042_install_filter(dell_laptop_i8042_filter); if (ret) { - printk(KERN_WARNING - "dell-laptop: Unable to install key filter\n"); + pr_warn("Unable to install key filter\n"); goto fail_filter; } diff --git a/drivers/platform/x86/dell-wmi-aio.c b/drivers/platform/x86/dell-wmi-aio.c index 0ed84573ae1f..3f945457f71c 100644 --- a/drivers/platform/x86/dell-wmi-aio.c +++ b/drivers/platform/x86/dell-wmi-aio.c @@ -15,6 +15,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include @@ -138,7 +139,7 @@ static int __init dell_wmi_aio_init(void) guid = dell_wmi_aio_find(); if (!guid) { - pr_warning("No known WMI GUID found\n"); + pr_warn("No known WMI GUID found\n"); return -ENXIO; } diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 77f1d55414c6..ce790827e199 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -23,6 +23,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -141,7 +143,7 @@ static void dell_wmi_notify(u32 value, void *context) status = wmi_get_event_data(value, &response); if (status != AE_OK) { - printk(KERN_INFO "dell-wmi: bad event status 0x%x\n", status); + pr_info("bad event status 0x%x\n", status); return; } @@ -153,8 +155,8 @@ static void dell_wmi_notify(u32 value, void *context) u16 *buffer_entry = (u16 *)obj->buffer.pointer; if (dell_new_hk_type && (buffer_entry[1] != 0x10)) { - printk(KERN_INFO "dell-wmi: Received unknown WMI event" - " (0x%x)\n", buffer_entry[1]); + pr_info("Received unknown WMI event (0x%x)\n", + buffer_entry[1]); kfree(obj); return; } @@ -167,8 +169,7 @@ static void dell_wmi_notify(u32 value, void *context) key = sparse_keymap_entry_from_scancode(dell_wmi_input_dev, reported_key); if (!key) { - printk(KERN_INFO "dell-wmi: Unknown key %x pressed\n", - reported_key); + pr_info("Unknown key %x pressed\n", reported_key); } else if ((key->keycode == KEY_BRIGHTNESSUP || key->keycode == KEY_BRIGHTNESSDOWN) && acpi_video) { /* Don't report brightness notifications that will also @@ -275,7 +276,7 @@ static int __init dell_wmi_init(void) acpi_status status; if (!wmi_has_guid(DELL_EVENT_GUID)) { - printk(KERN_WARNING "dell-wmi: No known WMI GUID found\n"); + pr_warn("No known WMI GUID found\n"); return -ENODEV; } @@ -290,9 +291,7 @@ static int __init dell_wmi_init(void) dell_wmi_notify, NULL); if (ACPI_FAILURE(status)) { dell_wmi_input_destroy(); - printk(KERN_ERR - "dell-wmi: Unable to register notify handler - %d\n", - status); + pr_err("Unable to register notify handler - %d\n", status); return -ENODEV; } -- cgit v1.2.3 From 22441ffeed17b94b28bd7c609f2cdb24d11e81f3 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:38 -0700 Subject: eeepc: Use pr_warn Just a trivial pr_warning to pr_warn conversion while adding a few missing newlines. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/eeepc-laptop.c | 21 +++++++++++---------- drivers/platform/x86/eeepc-wmi.c | 14 +++++++------- 2 files changed, 18 insertions(+), 17 deletions(-) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 2c1abf63957f..1c45d92e2163 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -228,7 +228,7 @@ static int set_acpi(struct eeepc_laptop *eeepc, int cm, int value) return -ENODEV; if (write_acpi_int(eeepc->handle, method, value)) - pr_warning("Error writing %s\n", method); + pr_warn("Error writing %s\n", method); return 0; } @@ -243,7 +243,7 @@ static int get_acpi(struct eeepc_laptop *eeepc, int cm) return -ENODEV; if (read_acpi_int(eeepc->handle, method, &value)) - pr_warning("Error reading %s\n", method); + pr_warn("Error reading %s\n", method); return value; } @@ -261,7 +261,7 @@ static int acpi_setter_handle(struct eeepc_laptop *eeepc, int cm, status = acpi_get_handle(eeepc->handle, (char *)method, handle); if (status != AE_OK) { - pr_warning("Error finding %s\n", method); + pr_warn("Error finding %s\n", method); return -ENODEV; } return 0; @@ -417,7 +417,7 @@ static ssize_t store_cpufv_disabled(struct device *dev, switch (value) { case 0: if (eeepc->cpufv_disabled) - pr_warning("cpufv enabled (not officially supported " + pr_warn("cpufv enabled (not officially supported " "on this model)\n"); eeepc->cpufv_disabled = false; return rv; @@ -609,7 +609,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) bus = port->subordinate; if (!bus) { - pr_warning("Unable to find PCI bus?\n"); + pr_warn("Unable to find PCI bus 1?\n"); goto out_unlock; } @@ -621,12 +621,12 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) absent = (l == 0xffffffff); if (blocked != absent) { - pr_warning("BIOS says wireless lan is %s, " - "but the pci device is %s\n", + pr_warn("BIOS says wireless lan is %s, " + "but the pci device is %s\n", blocked ? "blocked" : "unblocked", absent ? "absent" : "present"); - pr_warning("skipped wireless hotplug as probably " - "inappropriate for this model\n"); + pr_warn("skipped wireless hotplug as probably " + "inappropriate for this model\n"); goto out_unlock; } @@ -691,7 +691,8 @@ static int eeepc_register_rfkill_notifier(struct eeepc_laptop *eeepc, eeepc_rfkill_notify, eeepc); if (ACPI_FAILURE(status)) - pr_warning("Failed to register notify on %s\n", node); + pr_warn("Failed to register notify on %s\n", node); + /* * Refresh pci hotplug in case the rfkill state was * changed during setup. diff --git a/drivers/platform/x86/eeepc-wmi.c b/drivers/platform/x86/eeepc-wmi.c index 649dcadd8ea3..4aa867a9b88b 100644 --- a/drivers/platform/x86/eeepc-wmi.c +++ b/drivers/platform/x86/eeepc-wmi.c @@ -84,7 +84,7 @@ static const struct key_entry eeepc_wmi_keymap[] = { static acpi_status eeepc_wmi_parse_device(acpi_handle handle, u32 level, void *context, void **retval) { - pr_warning("Found legacy ATKD device (%s)", EEEPC_ACPI_HID); + pr_warn("Found legacy ATKD device (%s)\n", EEEPC_ACPI_HID); *(bool *)context = true; return AE_CTRL_TERMINATE; } @@ -105,12 +105,12 @@ static int eeepc_wmi_check_atkd(void) static int eeepc_wmi_probe(struct platform_device *pdev) { if (eeepc_wmi_check_atkd()) { - pr_warning("WMI device present, but legacy ATKD device is also " - "present and enabled."); - pr_warning("You probably booted with acpi_osi=\"Linux\" or " - "acpi_osi=\"!Windows 2009\""); - pr_warning("Can't load eeepc-wmi, use default acpi_osi " - "(preferred) or eeepc-laptop"); + pr_warn("WMI device present, but legacy ATKD device is also " + "present and enabled\n"); + pr_warn("You probably booted with acpi_osi=\"Linux\" or " + "acpi_osi=\"!Windows 2009\"\n"); + pr_warn("Can't load eeepc-wmi, use default acpi_osi " + "(preferred) or eeepc-laptop\n"); return -EBUSY; } return 0; -- cgit v1.2.3 From 77bad7c830e20085deba6a760ce85c13ecb12f4d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:39 -0700 Subject: fujitsu-laptop: Convert printks to pr_ Added pr_fmt, converted printks and removed hard coded prefixes. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/fujitsu-laptop.c | 39 +++++++++++++++++------------------ 1 file changed, 19 insertions(+), 20 deletions(-) diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 493054c2dbe1..6b26666b37f2 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -56,6 +56,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -585,8 +587,7 @@ static struct platform_driver fujitsupf_driver = { static void dmi_check_cb_common(const struct dmi_system_id *id) { acpi_handle handle; - printk(KERN_INFO "fujitsu-laptop: Identified laptop model '%s'.\n", - id->ident); + pr_info("Identified laptop model '%s'\n", id->ident); if (use_alt_lcd_levels == -1) { if (ACPI_SUCCESS(acpi_get_handle(NULL, "\\_SB.PCI0.LPCB.FJEX.SBL2", &handle))) @@ -691,11 +692,11 @@ static int acpi_fujitsu_add(struct acpi_device *device) result = acpi_bus_update_power(fujitsu->acpi_handle, &state); if (result) { - printk(KERN_ERR "Error reading power state\n"); + pr_err("Error reading power state\n"); goto err_unregister_input_dev; } - printk(KERN_INFO "ACPI: %s [%s] (%s)\n", + pr_info("ACPI: %s [%s] (%s)\n", acpi_device_name(device), acpi_device_bid(device), !device->power.state ? "on" : "off"); @@ -707,7 +708,7 @@ static int acpi_fujitsu_add(struct acpi_device *device) if (ACPI_FAILURE (acpi_evaluate_object (device->handle, METHOD_NAME__INI, NULL, NULL))) - printk(KERN_ERR "_INI Method failed\n"); + pr_err("_INI Method failed\n"); } /* do config (detect defaults) */ @@ -827,7 +828,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) error = kfifo_alloc(&fujitsu_hotkey->fifo, RINGBUFFERSIZE * sizeof(int), GFP_KERNEL); if (error) { - printk(KERN_ERR "kfifo_alloc failed\n"); + pr_err("kfifo_alloc failed\n"); goto err_stop; } @@ -859,13 +860,13 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) result = acpi_bus_update_power(fujitsu_hotkey->acpi_handle, &state); if (result) { - printk(KERN_ERR "Error reading power state\n"); + pr_err("Error reading power state\n"); goto err_unregister_input_dev; } - printk(KERN_INFO "ACPI: %s [%s] (%s)\n", - acpi_device_name(device), acpi_device_bid(device), - !device->power.state ? "on" : "off"); + pr_info("ACPI: %s [%s] (%s)\n", + acpi_device_name(device), acpi_device_bid(device), + !device->power.state ? "on" : "off"); fujitsu_hotkey->dev = device; @@ -875,7 +876,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) if (ACPI_FAILURE (acpi_evaluate_object (device->handle, METHOD_NAME__INI, NULL, NULL))) - printk(KERN_ERR "_INI Method failed\n"); + pr_err("_INI Method failed\n"); } i = 0; @@ -897,8 +898,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) call_fext_func(FUNC_RFKILL, 0x4, 0x0, 0x0); /* Suspect this is a keymap of the application panel, print it */ - printk(KERN_INFO "fujitsu-laptop: BTNI: [0x%x]\n", - call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0)); + pr_info("BTNI: [0x%x]\n", call_fext_func(FUNC_BUTTONS, 0x0, 0x0, 0x0)); #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) if (call_fext_func(FUNC_LEDS, 0x0, 0x0, 0x0) & LOGOLAMP_POWERON) { @@ -907,8 +907,8 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) if (result == 0) { fujitsu_hotkey->logolamp_registered = 1; } else { - printk(KERN_ERR "fujitsu-laptop: Could not register " - "LED handler for logo lamp, error %i\n", result); + pr_err("Could not register LED handler for logo lamp, error %i\n", + result); } } @@ -919,8 +919,8 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) if (result == 0) { fujitsu_hotkey->kblamps_registered = 1; } else { - printk(KERN_ERR "fujitsu-laptop: Could not register " - "LED handler for keyboard lamps, error %i\n", result); + pr_err("Could not register LED handler for keyboard lamps, error %i\n", + result); } } #endif @@ -1169,8 +1169,7 @@ static int __init fujitsu_init(void) fujitsu->bl_device->props.power = 0; } - printk(KERN_INFO "fujitsu-laptop: driver " FUJITSU_DRIVER_VERSION - " successfully loaded.\n"); + pr_info("driver " FUJITSU_DRIVER_VERSION " successfully loaded\n"); return 0; @@ -1216,7 +1215,7 @@ static void __exit fujitsu_cleanup(void) kfree(fujitsu); - printk(KERN_INFO "fujitsu-laptop: driver unloaded.\n"); + pr_info("driver unloaded\n"); } module_init(fujitsu_init); -- cgit v1.2.3 From 611f5763fd0e38f896aa38346d4bc3f5c388b608 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:40 -0700 Subject: hdaps: Convert printks to pr_ Added pr_fmt, converted printks and removed hard coded prefixes. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/hdaps.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/platform/x86/hdaps.c b/drivers/platform/x86/hdaps.c index 067bf36d32f3..5a34973dc164 100644 --- a/drivers/platform/x86/hdaps.c +++ b/drivers/platform/x86/hdaps.c @@ -26,6 +26,8 @@ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -238,7 +240,7 @@ static int hdaps_device_init(void) __check_latch(0x1611, 0x01)) goto out; - printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x).\n", + printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x)\n", __get_latch(0x1611)); outb(0x17, 0x1610); @@ -299,7 +301,7 @@ static int hdaps_probe(struct platform_device *dev) if (ret) return ret; - printk(KERN_INFO "hdaps: device successfully initialized.\n"); + pr_info("device successfully initialized\n"); return 0; } @@ -480,7 +482,7 @@ static struct attribute_group hdaps_attribute_group = { /* hdaps_dmi_match - found a match. return one, short-circuiting the hunt. */ static int __init hdaps_dmi_match(const struct dmi_system_id *id) { - printk(KERN_INFO "hdaps: %s detected.\n", id->ident); + pr_info("%s detected\n", id->ident); return 1; } @@ -488,8 +490,7 @@ static int __init hdaps_dmi_match(const struct dmi_system_id *id) static int __init hdaps_dmi_match_invert(const struct dmi_system_id *id) { hdaps_invert = (unsigned long)id->driver_data; - printk(KERN_INFO "hdaps: inverting axis (%u) readings.\n", - hdaps_invert); + pr_info("inverting axis (%u) readings\n", hdaps_invert); return hdaps_dmi_match(id); } @@ -543,7 +544,7 @@ static int __init hdaps_init(void) int ret; if (!dmi_check_system(hdaps_whitelist)) { - printk(KERN_WARNING "hdaps: supported laptop not found!\n"); + pr_warn("supported laptop not found!\n"); ret = -ENODEV; goto out; } @@ -595,7 +596,7 @@ static int __init hdaps_init(void) if (ret) goto out_idev; - printk(KERN_INFO "hdaps: driver successfully loaded.\n"); + pr_info("driver successfully loaded\n"); return 0; out_idev: @@ -609,7 +610,7 @@ out_driver: out_region: release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS); out: - printk(KERN_WARNING "hdaps: driver init failed (ret=%d)!\n", ret); + pr_warn("driver init failed (ret=%d)!\n", ret); return ret; } @@ -622,7 +623,7 @@ static void __exit hdaps_exit(void) platform_driver_unregister(&hdaps_driver); release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS); - printk(KERN_INFO "hdaps: driver unloaded.\n"); + pr_info("driver unloaded\n"); } module_init(hdaps_init); -- cgit v1.2.3 From b5a4223c1ce5edbaae3db9494de8dcb2d08a755b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:41 -0700 Subject: hp-wmi: Convert printks to pr_ Added pr_fmt and converted printks to pr_. Removed now unused PREFIX and UNIMPL #defines. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/hp-wmi.c | 43 +++++++++++++++++-------------------------- 1 file changed, 17 insertions(+), 26 deletions(-) diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c index 1bc4a7539ba9..f94017bcdd6e 100644 --- a/drivers/platform/x86/hp-wmi.c +++ b/drivers/platform/x86/hp-wmi.c @@ -24,6 +24,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -54,9 +56,6 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4"); #define HPWMI_HOTKEY_QUERY 0xc #define HPWMI_WIRELESS2_QUERY 0x1b -#define PREFIX "HP WMI: " -#define UNIMP "Unimplemented " - enum hp_wmi_radio { HPWMI_WIFI = 0, HPWMI_BLUETOOTH = 1, @@ -228,9 +227,8 @@ static int hp_wmi_perform_query(int query, int write, void *buffer, if (bios_return->return_code) { if (bios_return->return_code != HPWMI_RET_UNKNOWN_CMDTYPE) - printk(KERN_WARNING PREFIX "query 0x%x returned " - "error 0x%x\n", - query, bios_return->return_code); + pr_warn("query 0x%x returned error 0x%x\n", + query, bios_return->return_code); kfree(obj); return bios_return->return_code; } @@ -384,8 +382,7 @@ static int hp_wmi_rfkill2_refresh(void) if (num >= state.count || devstate->rfkill_id != rfkill2[i].id) { - printk(KERN_WARNING PREFIX "power configuration of " - "the wireless devices unexpectedly changed\n"); + pr_warn("power configuration of the wireless devices unexpectedly changed\n"); continue; } @@ -471,7 +468,7 @@ static void hp_wmi_notify(u32 value, void *context) status = wmi_get_event_data(value, &response); if (status != AE_OK) { - printk(KERN_INFO PREFIX "bad event status 0x%x\n", status); + pr_info("bad event status 0x%x\n", status); return; } @@ -480,8 +477,7 @@ static void hp_wmi_notify(u32 value, void *context) if (!obj) return; if (obj->type != ACPI_TYPE_BUFFER) { - printk(KERN_INFO "hp-wmi: Unknown response received %d\n", - obj->type); + pr_info("Unknown response received %d\n", obj->type); kfree(obj); return; } @@ -498,8 +494,7 @@ static void hp_wmi_notify(u32 value, void *context) event_id = *location; event_data = *(location + 2); } else { - printk(KERN_INFO "hp-wmi: Unknown buffer length %d\n", - obj->buffer.length); + pr_info("Unknown buffer length %d\n", obj->buffer.length); kfree(obj); return; } @@ -527,8 +522,7 @@ static void hp_wmi_notify(u32 value, void *context) if (!sparse_keymap_report_event(hp_wmi_input_dev, key_code, 1, true)) - printk(KERN_INFO PREFIX "Unknown key code - 0x%x\n", - key_code); + pr_info("Unknown key code - 0x%x\n", key_code); break; case HPWMI_WIRELESS: if (rfkill2_count) { @@ -550,14 +544,12 @@ static void hp_wmi_notify(u32 value, void *context) hp_wmi_get_hw_state(HPWMI_WWAN)); break; case HPWMI_CPU_BATTERY_THROTTLE: - printk(KERN_INFO PREFIX UNIMP "CPU throttle because of 3 Cell" - " battery event detected\n"); + pr_info("Unimplemented CPU throttle because of 3 Cell battery event detected\n"); break; case HPWMI_LOCK_SWITCH: break; default: - printk(KERN_INFO PREFIX "Unknown event_id - %d - 0x%x\n", - event_id, event_data); + pr_info("Unknown event_id - %d - 0x%x\n", event_id, event_data); break; } } @@ -705,7 +697,7 @@ static int __devinit hp_wmi_rfkill2_setup(struct platform_device *device) return err; if (state.count > HPWMI_MAX_RFKILL2_DEVICES) { - printk(KERN_WARNING PREFIX "unable to parse 0x1b query output\n"); + pr_warn("unable to parse 0x1b query output\n"); return -EINVAL; } @@ -727,14 +719,14 @@ static int __devinit hp_wmi_rfkill2_setup(struct platform_device *device) name = "hp-wwan"; break; default: - printk(KERN_WARNING PREFIX "unknown device type 0x%x\n", - state.device[i].radio_type); + pr_warn("unknown device type 0x%x\n", + state.device[i].radio_type); continue; } if (!state.device[i].vendor_id) { - printk(KERN_WARNING PREFIX "zero device %d while %d " - "reported\n", i, state.count); + pr_warn("zero device %d while %d reported\n", + i, state.count); continue; } @@ -755,8 +747,7 @@ static int __devinit hp_wmi_rfkill2_setup(struct platform_device *device) IS_HWBLOCKED(state.device[i].power)); if (!(state.device[i].power & HPWMI_POWER_BIOS)) - printk(KERN_INFO PREFIX "device %s blocked by BIOS\n", - name); + pr_info("device %s blocked by BIOS\n", name); err = rfkill_register(rfkill); if (err) { -- cgit v1.2.3 From 323623a717c7feec3f36099f4caa18b3319c5cca Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:42 -0700 Subject: ibm_rtl: Use pr_fmt and pr_ Remove hard coded prefixes from logging messages. Neaten RTL_DEBUG macro and uses. Convert __FUNCTION__ to __func__. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/ibm_rtl.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/platform/x86/ibm_rtl.c b/drivers/platform/x86/ibm_rtl.c index 10563458408c..811d436cd677 100644 --- a/drivers/platform/x86/ibm_rtl.c +++ b/drivers/platform/x86/ibm_rtl.c @@ -22,6 +22,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -69,9 +71,10 @@ struct ibm_rtl_table { #define RTL_SIGNATURE 0x0000005f4c54525fULL #define RTL_MASK 0x000000ffffffffffULL -#define RTL_DEBUG(A, ...) do { \ - if (debug) \ - pr_info("ibm-rtl: " A, ##__VA_ARGS__ ); \ +#define RTL_DEBUG(fmt, ...) \ +do { \ + if (debug) \ + pr_info(fmt, ##__VA_ARGS__); \ } while (0) static DEFINE_MUTEX(rtl_lock); @@ -114,7 +117,7 @@ static int ibm_rtl_write(u8 value) int ret = 0, count = 0; static u32 cmd_port_val; - RTL_DEBUG("%s(%d)\n", __FUNCTION__, value); + RTL_DEBUG("%s(%d)\n", __func__, value); value = value == 1 ? RTL_CMD_ENTER_PRTM : RTL_CMD_EXIT_PRTM; @@ -144,8 +147,8 @@ static int ibm_rtl_write(u8 value) while (ioread8(&rtl_table->command)) { msleep(10); if (count++ > 500) { - pr_err("ibm-rtl: Hardware not responding to " - "mode switch request\n"); + pr_err("Hardware not responding to " + "mode switch request\n"); ret = -EIO; break; } @@ -250,7 +253,7 @@ static int __init ibm_rtl_init(void) { int ret = -ENODEV, i; if (force) - pr_warning("ibm-rtl: module loaded by force\n"); + pr_warn("module loaded by force\n"); /* first ensure that we are running on IBM HW */ else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table)) return -ENODEV; @@ -295,7 +298,7 @@ static int __init ibm_rtl_init(void) { rtl_cmd_width = ioread8(&rtl_table->cmd_granularity); rtl_cmd_type = ioread8(&rtl_table->cmd_address_type); RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n", - rtl_cmd_width, rtl_cmd_type); + rtl_cmd_width, rtl_cmd_type); addr = ioread32(&rtl_table->cmd_port_address); RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr); plen = rtl_cmd_width/sizeof(char); -- cgit v1.2.3 From 9ab23989d3e774f4545c83eeab0137e35f7115be Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:43 -0700 Subject: ideapad-laptop: Add pr_fmt Add pr_fmt to prefix logging messages. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/ideapad-laptop.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 21b101899bae..bfdda33feb26 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -20,6 +20,8 @@ * 02110-1301, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include -- cgit v1.2.3 From 4686f6df69c5bca5ea795e01048d32f6eed07ba7 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:44 -0700 Subject: intel_menlow: Add pr_fmt and use pr_ Add pr_fmt to prefix the logging messages. Convert printk to pr_. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_menlow.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c index eacd5da7dd24..809adea4965f 100644 --- a/drivers/platform/x86/intel_menlow.c +++ b/drivers/platform/x86/intel_menlow.c @@ -27,6 +27,8 @@ * to get/set bandwidth. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -135,8 +137,7 @@ static int memory_set_cur_bandwidth(struct thermal_cooling_device *cdev, acpi_evaluate_integer(handle, MEMORY_SET_BANDWIDTH, &arg_list, &temp); - printk(KERN_INFO - "Bandwidth value was %ld: status is %d\n", state, status); + pr_info("Bandwidth value was %ld: status is %d\n", state, status); if (ACPI_FAILURE(status)) return -EFAULT; -- cgit v1.2.3 From 9a2ffd168ef8ec3705060ffb21d6dcb20eeb9506 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:45 -0700 Subject: intel_pmic_gpio: Convert printks to pr_ Add #define pr_fmt(fmt) "%s: " fmt, __func__ to prefix function name to each output message. Convert printks to pr_. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_pmic_gpio.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c index 464bb3fc4d88..1686c1e07d5d 100644 --- a/drivers/platform/x86/intel_pmic_gpio.c +++ b/drivers/platform/x86/intel_pmic_gpio.c @@ -19,6 +19,8 @@ * Moorestown platform PMIC chip */ +#define pr_fmt(fmt) "%s: " fmt, __func__ + #include #include #include @@ -90,8 +92,7 @@ static void pmic_program_irqtype(int gpio, int type) static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset) { if (offset > 8) { - printk(KERN_ERR - "%s: only pin 0-7 support input\n", __func__); + pr_err("only pin 0-7 support input\n"); return -1;/* we only have 8 GPIO can use as input */ } return intel_scu_ipc_update_register(GPIO0 + offset, @@ -116,8 +117,7 @@ static int pmic_gpio_direction_output(struct gpio_chip *chip, value ? 1 << (offset - 16) : 0, 1 << (offset - 16)); else { - printk(KERN_ERR - "%s: invalid PMIC GPIO pin %d!\n", __func__, offset); + pr_err("invalid PMIC GPIO pin %d!\n", offset); WARN_ON(1); } @@ -260,7 +260,7 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev) /* setting up SRAM mapping for GPIOINT register */ pg->gpiointr = ioremap_nocache(pdata->gpiointr, 8); if (!pg->gpiointr) { - printk(KERN_ERR "%s: Can not map GPIOINT.\n", __func__); + pr_err("Can not map GPIOINT\n"); retval = -EINVAL; goto err2; } @@ -281,13 +281,13 @@ static int __devinit platform_pmic_gpio_probe(struct platform_device *pdev) pg->chip.dev = dev; retval = gpiochip_add(&pg->chip); if (retval) { - printk(KERN_ERR "%s: Can not add pmic gpio chip.\n", __func__); + pr_err("Can not add pmic gpio chip\n"); goto err; } retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg); if (retval) { - printk(KERN_WARNING "pmic: Interrupt request failed\n"); + pr_warn("Interrupt request failed\n"); goto err; } -- cgit v1.2.3 From f9dcf192ed527fbf2f3a8a3574006d1ae855100b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:46 -0700 Subject: msi-laptop: pr_ neatening Just making it a bit more like other logging message uses. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/msi-laptop.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c index 23fb2afda00b..f89c0b6a9aec 100644 --- a/drivers/platform/x86/msi-laptop.c +++ b/drivers/platform/x86/msi-laptop.c @@ -447,7 +447,7 @@ static struct platform_device *msipf_device; static int dmi_check_cb(const struct dmi_system_id *id) { - pr_info("Identified laptop model '%s'.\n", id->ident); + pr_info("Identified laptop model '%s'\n", id->ident); return 1; } @@ -875,8 +875,7 @@ static int __init msi_init(void) /* Register backlight stuff */ if (acpi_video_backlight_support()) { - pr_info("Brightness ignored, must be controlled " - "by ACPI video driver\n"); + pr_info("Brightness ignored, must be controlled by ACPI video driver\n"); } else { struct backlight_properties props; memset(&props, 0, sizeof(struct backlight_properties)); @@ -930,7 +929,7 @@ static int __init msi_init(void) if (auto_brightness != 2) set_auto_brightness(auto_brightness); - pr_info("driver "MSI_DRIVER_VERSION" successfully loaded.\n"); + pr_info("driver " MSI_DRIVER_VERSION " successfully loaded\n"); return 0; @@ -978,7 +977,7 @@ static void __exit msi_cleanup(void) if (auto_brightness != 2) set_auto_brightness(1); - pr_info("driver unloaded.\n"); + pr_info("driver unloaded\n"); } module_init(msi_init); -- cgit v1.2.3 From dd3c7f2308e91d6ecbe5cd8a3310bb49e47e1ae7 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:47 -0700 Subject: msi-wmi: Use pr_fmt and pr_ Added pr_fmt. Removed now unused #define DRV_PFX Convert dprintk to pr_debug. Convert printks to pr_. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/msi-wmi.c | 45 +++++++++++++++++++----------------------- 1 file changed, 20 insertions(+), 25 deletions(-) diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c index d5419c9ec07a..c832e3356cd6 100644 --- a/drivers/platform/x86/msi-wmi.c +++ b/drivers/platform/x86/msi-wmi.c @@ -20,6 +20,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include @@ -36,13 +37,10 @@ MODULE_ALIAS("wmi:551A1F84-FBDD-4125-91DB-3EA8F44F1D45"); MODULE_ALIAS("wmi:B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2"); #define DRV_NAME "msi-wmi" -#define DRV_PFX DRV_NAME ": " #define MSIWMI_BIOS_GUID "551A1F84-FBDD-4125-91DB-3EA8F44F1D45" #define MSIWMI_EVENT_GUID "B6F3EEF2-3D2F-49DC-9DE3-85BCE18C62F2" -#define dprintk(msg...) pr_debug(DRV_PFX msg) - #define SCANCODE_BASE 0xD0 #define MSI_WMI_BRIGHTNESSUP SCANCODE_BASE #define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1) @@ -78,7 +76,7 @@ static int msi_wmi_query_block(int instance, int *ret) if (!obj || obj->type != ACPI_TYPE_INTEGER) { if (obj) { - printk(KERN_ERR DRV_PFX "query block returned object " + pr_err("query block returned object " "type: %d - buffer length:%d\n", obj->type, obj->type == ACPI_TYPE_BUFFER ? obj->buffer.length : 0); @@ -97,8 +95,8 @@ static int msi_wmi_set_block(int instance, int value) struct acpi_buffer input = { sizeof(int), &value }; - dprintk("Going to set block of instance: %d - value: %d\n", - instance, value); + pr_debug("Going to set block of instance: %d - value: %d\n", + instance, value); status = wmi_set_block(MSIWMI_BIOS_GUID, instance, &input); @@ -112,20 +110,19 @@ static int bl_get(struct backlight_device *bd) /* Instance 1 is "get backlight", cmp with DSDT */ err = msi_wmi_query_block(1, &ret); if (err) { - printk(KERN_ERR DRV_PFX "Could not query backlight: %d\n", err); + pr_err("Could not query backlight: %d\n", err); return -EINVAL; } - dprintk("Get: Query block returned: %d\n", ret); + pr_debug("Get: Query block returned: %d\n", ret); for (level = 0; level < ARRAY_SIZE(backlight_map); level++) { if (backlight_map[level] == ret) { - dprintk("Current backlight level: 0x%X - index: %d\n", - backlight_map[level], level); + pr_debug("Current backlight level: 0x%X - index: %d\n", + backlight_map[level], level); break; } } if (level == ARRAY_SIZE(backlight_map)) { - printk(KERN_ERR DRV_PFX "get: Invalid brightness value: 0x%X\n", - ret); + pr_err("get: Invalid brightness value: 0x%X\n", ret); return -EINVAL; } return level; @@ -156,7 +153,7 @@ static void msi_wmi_notify(u32 value, void *context) status = wmi_get_event_data(value, &response); if (status != AE_OK) { - printk(KERN_INFO DRV_PFX "bad event status 0x%x\n", status); + pr_info("bad event status 0x%x\n", status); return; } @@ -164,7 +161,7 @@ static void msi_wmi_notify(u32 value, void *context) if (obj && obj->type == ACPI_TYPE_INTEGER) { int eventcode = obj->integer.value; - dprintk("Eventcode: 0x%x\n", eventcode); + pr_debug("Eventcode: 0x%x\n", eventcode); key = sparse_keymap_entry_from_scancode(msi_wmi_input_dev, eventcode); if (key) { @@ -175,8 +172,8 @@ static void msi_wmi_notify(u32 value, void *context) /* Ignore event if the same event happened in a 50 ms timeframe -> Key press may result in 10-20 GPEs */ if (ktime_to_us(diff) < 1000 * 50) { - dprintk("Suppressed key event 0x%X - " - "Last press was %lld us ago\n", + pr_debug("Suppressed key event 0x%X - " + "Last press was %lld us ago\n", key->code, ktime_to_us(diff)); return; } @@ -187,17 +184,16 @@ static void msi_wmi_notify(u32 value, void *context) (!acpi_video_backlight_support() || (key->code != MSI_WMI_BRIGHTNESSUP && key->code != MSI_WMI_BRIGHTNESSDOWN))) { - dprintk("Send key: 0x%X - " - "Input layer keycode: %d\n", key->code, - key->keycode); + pr_debug("Send key: 0x%X - " + "Input layer keycode: %d\n", + key->code, key->keycode); sparse_keymap_report_entry(msi_wmi_input_dev, key, 1, true); } } else - printk(KERN_INFO "Unknown key pressed - %x\n", - eventcode); + pr_info("Unknown key pressed - %x\n", eventcode); } else - printk(KERN_INFO DRV_PFX "Unknown event received\n"); + pr_info("Unknown event received\n"); kfree(response.pointer); } @@ -238,8 +234,7 @@ static int __init msi_wmi_init(void) int err; if (!wmi_has_guid(MSIWMI_EVENT_GUID)) { - printk(KERN_ERR - "This machine doesn't have MSI-hotkeys through WMI\n"); + pr_err("This machine doesn't have MSI-hotkeys through WMI\n"); return -ENODEV; } err = wmi_install_notify_handler(MSIWMI_EVENT_GUID, @@ -270,7 +265,7 @@ static int __init msi_wmi_init(void) backlight->props.brightness = err; } - dprintk("Event handler installed\n"); + pr_debug("Event handler installed\n"); return 0; -- cgit v1.2.3 From 50f581a4f09f5b7f78a1c791e09b2c8d24a1e20c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:48 -0700 Subject: sony-laptop: Add and use #define pr_fmt Add pr_fmt. Remove now unused #define DRV_PRX. Neaten dprintk macro. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/sony-laptop.c | 104 +++++++++++++++++-------------------- 1 file changed, 49 insertions(+), 55 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 6fe8cd6e23b5..12dd0a62f305 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -42,6 +42,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -70,10 +72,10 @@ #include #endif -#define DRV_PFX "sony-laptop: " -#define dprintk(msg...) do { \ - if (debug) \ - pr_warn(DRV_PFX msg); \ +#define dprintk(fmt, ...) \ +do { \ + if (debug) \ + pr_warn(fmt, ##__VA_ARGS__); \ } while (0) #define SONY_LAPTOP_DRIVER_VERSION "0.6" @@ -418,7 +420,7 @@ static int sony_laptop_setup_input(struct acpi_device *acpi_device) error = kfifo_alloc(&sony_laptop_input.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL); if (error) { - pr_err(DRV_PFX "kfifo_alloc failed\n"); + pr_err("kfifo_alloc failed\n"); goto err_dec_users; } @@ -702,7 +704,7 @@ static int acpi_callgetfunc(acpi_handle handle, char *name, int *result) return 0; } - pr_warn(DRV_PFX "acpi_callreadfunc failed\n"); + pr_warn("acpi_callreadfunc failed\n"); return -1; } @@ -728,8 +730,7 @@ static int acpi_callsetfunc(acpi_handle handle, char *name, int value, if (status == AE_OK) { if (result != NULL) { if (out_obj.type != ACPI_TYPE_INTEGER) { - pr_warn(DRV_PFX "acpi_evaluate_object bad " - "return type\n"); + pr_warn("acpi_evaluate_object bad return type\n"); return -1; } *result = out_obj.integer.value; @@ -737,7 +738,7 @@ static int acpi_callsetfunc(acpi_handle handle, char *name, int value, return 0; } - pr_warn(DRV_PFX "acpi_evaluate_object failed\n"); + pr_warn("acpi_evaluate_object failed\n"); return -1; } @@ -1104,10 +1105,8 @@ static void sony_nc_notify(struct acpi_device *device, u32 event) } if (!key_event->data) - pr_info(DRV_PFX - "Unknown event: 0x%x 0x%x\n", - key_handle, - ev); + pr_info("Unknown event: 0x%x 0x%x\n", + key_handle, ev); else sony_laptop_report_input_event(ev); } @@ -1128,7 +1127,7 @@ static acpi_status sony_walk_callback(acpi_handle handle, u32 level, struct acpi_device_info *info; if (ACPI_SUCCESS(acpi_get_object_info(handle, &info))) { - pr_warn(DRV_PFX "method: name: %4.4s, args %X\n", + pr_warn("method: name: %4.4s, args %X\n", (char *)&info->name, info->param_count); kfree(info); @@ -1169,7 +1168,7 @@ static int sony_nc_resume(struct acpi_device *device) ret = acpi_callsetfunc(sony_nc_acpi_handle, *item->acpiset, item->value, NULL); if (ret < 0) { - pr_err(DRV_PFX "%s: %d\n", __func__, ret); + pr_err("%s: %d\n", __func__, ret); break; } } @@ -1336,12 +1335,12 @@ static void sony_nc_rfkill_setup(struct acpi_device *device) device_enum = (union acpi_object *) buffer.pointer; if (!device_enum) { - pr_err(DRV_PFX "No SN06 return object."); + pr_err("No SN06 return object\n"); goto out_no_enum; } if (device_enum->type != ACPI_TYPE_BUFFER) { - pr_err(DRV_PFX "Invalid SN06 return object 0x%.2x\n", - device_enum->type); + pr_err("Invalid SN06 return object 0x%.2x\n", + device_enum->type); goto out_no_enum; } @@ -1662,7 +1661,7 @@ static void sony_nc_backlight_setup(void) ops, &props); if (IS_ERR(sony_bl_props.dev)) { - pr_warn(DRV_PFX "unable to register backlight device\n"); + pr_warn("unable to register backlight device\n"); sony_bl_props.dev = NULL; } else sony_bl_props.dev->props.brightness = @@ -1682,8 +1681,7 @@ static int sony_nc_add(struct acpi_device *device) acpi_handle handle; struct sony_nc_value *item; - pr_info(DRV_PFX "%s v%s.\n", SONY_NC_DRIVER_NAME, - SONY_LAPTOP_DRIVER_VERSION); + pr_info("%s v%s\n", SONY_NC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION); sony_nc_acpi_device = device; strcpy(acpi_device_class(device), "sony/hotkey"); @@ -1708,7 +1706,7 @@ static int sony_nc_add(struct acpi_device *device) sony_nc_acpi_handle, 1, sony_walk_callback, NULL, NULL, NULL); if (ACPI_FAILURE(status)) { - pr_warn(DRV_PFX "unable to walk acpi resources\n"); + pr_warn("unable to walk acpi resources\n"); result = -ENODEV; goto outpresent; } @@ -1736,13 +1734,12 @@ static int sony_nc_add(struct acpi_device *device) /* setup input devices and helper fifo */ result = sony_laptop_setup_input(device); if (result) { - pr_err(DRV_PFX "Unable to create input devices.\n"); + pr_err("Unable to create input devices\n"); goto outkbdbacklight; } if (acpi_video_backlight_support()) { - pr_info(DRV_PFX "brightness ignored, must be " - "controlled by ACPI video driver\n"); + pr_info("brightness ignored, must be controlled by ACPI video driver\n"); } else { sony_nc_backlight_setup(); } @@ -2265,9 +2262,9 @@ out: if (pcidev) pci_dev_put(pcidev); - pr_info(DRV_PFX "detected Type%d model\n", - dev->model == SONYPI_DEVICE_TYPE1 ? 1 : - dev->model == SONYPI_DEVICE_TYPE2 ? 2 : 3); + pr_info("detected Type%d model\n", + dev->model == SONYPI_DEVICE_TYPE1 ? 1 : + dev->model == SONYPI_DEVICE_TYPE2 ? 2 : 3); } /* camera tests and poweron/poweroff */ @@ -2313,7 +2310,7 @@ static int __sony_pic_camera_ready(void) static int __sony_pic_camera_off(void) { if (!camera) { - pr_warn(DRV_PFX "camera control not enabled\n"); + pr_warn("camera control not enabled\n"); return -ENODEV; } @@ -2333,7 +2330,7 @@ static int __sony_pic_camera_on(void) int i, j, x; if (!camera) { - pr_warn(DRV_PFX "camera control not enabled\n"); + pr_warn("camera control not enabled\n"); return -ENODEV; } @@ -2356,7 +2353,7 @@ static int __sony_pic_camera_on(void) } if (j == 0) { - pr_warn(DRV_PFX "failed to power on camera\n"); + pr_warn("failed to power on camera\n"); return -ENODEV; } @@ -2412,8 +2409,7 @@ int sony_pic_camera_command(int command, u8 value) ITERATIONS_SHORT); break; default: - pr_err(DRV_PFX "sony_pic_camera_command invalid: %d\n", - command); + pr_err("sony_pic_camera_command invalid: %d\n", command); break; } mutex_unlock(&spic_dev.lock); @@ -2819,7 +2815,7 @@ static int sonypi_compat_init(void) error = kfifo_alloc(&sonypi_compat.fifo, SONY_LAPTOP_BUF_SIZE, GFP_KERNEL); if (error) { - pr_err(DRV_PFX "kfifo_alloc failed\n"); + pr_err("kfifo_alloc failed\n"); return error; } @@ -2829,12 +2825,12 @@ static int sonypi_compat_init(void) sonypi_misc_device.minor = minor; error = misc_register(&sonypi_misc_device); if (error) { - pr_err(DRV_PFX "misc_register failed\n"); + pr_err("misc_register failed\n"); goto err_free_kfifo; } if (minor == -1) - pr_info(DRV_PFX "device allocated minor is %d\n", - sonypi_misc_device.minor); + pr_info("device allocated minor is %d\n", + sonypi_misc_device.minor); return 0; @@ -2893,8 +2889,8 @@ sony_pic_read_possible_resource(struct acpi_resource *resource, void *context) } for (i = 0; i < p->interrupt_count; i++) { if (!p->interrupts[i]) { - pr_warn(DRV_PFX "Invalid IRQ %d\n", - p->interrupts[i]); + pr_warn("Invalid IRQ %d\n", + p->interrupts[i]); continue; } interrupt = kzalloc(sizeof(*interrupt), @@ -2932,14 +2928,14 @@ sony_pic_read_possible_resource(struct acpi_resource *resource, void *context) ioport->io2.address_length); } else { - pr_err(DRV_PFX "Unknown SPIC Type, more than 2 IO Ports\n"); + pr_err("Unknown SPIC Type, more than 2 IO Ports\n"); return AE_ERROR; } return AE_OK; } default: dprintk("Resource %d isn't an IRQ nor an IO port\n", - resource->type); + resource->type); case ACPI_RESOURCE_TYPE_END_TAG: return AE_OK; @@ -2960,7 +2956,7 @@ static int sony_pic_possible_resources(struct acpi_device *device) dprintk("Evaluating _STA\n"); result = acpi_bus_get_status(device); if (result) { - pr_warn(DRV_PFX "Unable to read status\n"); + pr_warn("Unable to read status\n"); goto end; } @@ -2976,8 +2972,7 @@ static int sony_pic_possible_resources(struct acpi_device *device) status = acpi_walk_resources(device->handle, METHOD_NAME__PRS, sony_pic_read_possible_resource, &spic_dev); if (ACPI_FAILURE(status)) { - pr_warn(DRV_PFX "Failure evaluating %s\n", - METHOD_NAME__PRS); + pr_warn("Failure evaluating %s\n", METHOD_NAME__PRS); result = -ENODEV; } end: @@ -3090,7 +3085,7 @@ static int sony_pic_enable(struct acpi_device *device, /* check for total failure */ if (ACPI_FAILURE(status)) { - pr_err(DRV_PFX "Error evaluating _SRS\n"); + pr_err("Error evaluating _SRS\n"); result = -ENODEV; goto end; } @@ -3182,7 +3177,7 @@ static int sony_pic_remove(struct acpi_device *device, int type) struct sony_pic_irq *irq, *tmp_irq; if (sony_pic_disable(device)) { - pr_err(DRV_PFX "Couldn't disable device.\n"); + pr_err("Couldn't disable device\n"); return -ENXIO; } @@ -3222,8 +3217,7 @@ static int sony_pic_add(struct acpi_device *device) struct sony_pic_ioport *io, *tmp_io; struct sony_pic_irq *irq, *tmp_irq; - pr_info(DRV_PFX "%s v%s.\n", SONY_PIC_DRIVER_NAME, - SONY_LAPTOP_DRIVER_VERSION); + pr_info("%s v%s\n", SONY_PIC_DRIVER_NAME, SONY_LAPTOP_DRIVER_VERSION); spic_dev.acpi_dev = device; strcpy(acpi_device_class(device), "sony/hotkey"); @@ -3233,14 +3227,14 @@ static int sony_pic_add(struct acpi_device *device) /* read _PRS resources */ result = sony_pic_possible_resources(device); if (result) { - pr_err(DRV_PFX "Unable to read possible resources.\n"); + pr_err("Unable to read possible resources\n"); goto err_free_resources; } /* setup input devices and helper fifo */ result = sony_laptop_setup_input(device); if (result) { - pr_err(DRV_PFX "Unable to create input devices.\n"); + pr_err("Unable to create input devices\n"); goto err_free_resources; } @@ -3281,7 +3275,7 @@ static int sony_pic_add(struct acpi_device *device) } } if (!spic_dev.cur_ioport) { - pr_err(DRV_PFX "Failed to request_region.\n"); + pr_err("Failed to request_region\n"); result = -ENODEV; goto err_remove_compat; } @@ -3301,7 +3295,7 @@ static int sony_pic_add(struct acpi_device *device) } } if (!spic_dev.cur_irq) { - pr_err(DRV_PFX "Failed to request_irq.\n"); + pr_err("Failed to request_irq\n"); result = -ENODEV; goto err_release_region; } @@ -3309,7 +3303,7 @@ static int sony_pic_add(struct acpi_device *device) /* set resource status _SRS */ result = sony_pic_enable(device, spic_dev.cur_ioport, spic_dev.cur_irq); if (result) { - pr_err(DRV_PFX "Couldn't enable device.\n"); + pr_err("Couldn't enable device\n"); goto err_free_irq; } @@ -3418,7 +3412,7 @@ static int __init sony_laptop_init(void) if (!no_spic && dmi_check_system(sonypi_dmi_table)) { result = acpi_bus_register_driver(&sony_pic_driver); if (result) { - pr_err(DRV_PFX "Unable to register SPIC driver."); + pr_err("Unable to register SPIC driver\n"); goto out; } spic_drv_registered = 1; @@ -3426,7 +3420,7 @@ static int __init sony_laptop_init(void) result = acpi_bus_register_driver(&sony_nc_driver); if (result) { - pr_err(DRV_PFX "Unable to register SNC driver."); + pr_err("Unable to register SNC driver\n"); goto out_unregister_pic; } -- cgit v1.2.3 From 33cab1b71ec1bd02d55cede277bbc91485a68068 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:49 -0700 Subject: tc1100-wmi: Add pr_fmt, use pr_ Use the more normal logging styles. Removed now unused local logging #defines. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/tc1100-wmi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/platform/x86/tc1100-wmi.c b/drivers/platform/x86/tc1100-wmi.c index 865ef78d6f1a..e24f5ae475af 100644 --- a/drivers/platform/x86/tc1100-wmi.c +++ b/drivers/platform/x86/tc1100-wmi.c @@ -25,6 +25,8 @@ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -40,9 +42,6 @@ #define TC1100_INSTANCE_WIRELESS 1 #define TC1100_INSTANCE_JOGDIAL 2 -#define TC1100_LOGPREFIX "tc1100-wmi: " -#define TC1100_INFO KERN_INFO TC1100_LOGPREFIX - MODULE_AUTHOR("Jamey Hicks, Carlos Corbacho"); MODULE_DESCRIPTION("HP Compaq TC1100 Tablet WMI Extras"); MODULE_LICENSE("GPL"); @@ -264,7 +263,7 @@ static int __init tc1100_init(void) if (error) goto err_device_del; - printk(TC1100_INFO "HP Compaq TC1100 Tablet WMI Extras loaded\n"); + pr_info("HP Compaq TC1100 Tablet WMI Extras loaded\n"); return 0; err_device_del: -- cgit v1.2.3 From 93c1d05b5fa83ac771b5d1a5b4eb0fe6f54b3b46 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:51 -0700 Subject: topstar-laptop: Convert remaining printk to pr_info To be similar to all other uses. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/topstar-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/topstar-laptop.c b/drivers/platform/x86/topstar-laptop.c index 1d07d6d09f27..4c20447ddbb7 100644 --- a/drivers/platform/x86/topstar-laptop.c +++ b/drivers/platform/x86/topstar-laptop.c @@ -194,7 +194,7 @@ static int __init topstar_laptop_init(void) if (ret < 0) return ret; - printk(KERN_INFO "Topstar Laptop ACPI extras driver loaded\n"); + pr_info("ACPI extras driver loaded\n"); return 0; } -- cgit v1.2.3 From 7e33460d8d991843a5821d667b55c75a092cf6e3 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:52 -0700 Subject: toshiba: Convert printks to pr_ Add pr_fmt. Remove local MY_ #defines. Convert printks to pr_. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/toshiba_acpi.c | 59 +++++++++++++++----------------- drivers/platform/x86/toshiba_bluetooth.c | 11 +++--- 2 files changed, 34 insertions(+), 36 deletions(-) diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 63f42a22e102..cb009b2629ee 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -35,6 +35,8 @@ * */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define TOSHIBA_ACPI_VERSION "0.19" #define PROC_INTERFACE_VERSION 1 @@ -60,11 +62,6 @@ MODULE_AUTHOR("John Belmonte"); MODULE_DESCRIPTION("Toshiba Laptop ACPI Extras Driver"); MODULE_LICENSE("GPL"); -#define MY_LOGPREFIX "toshiba_acpi: " -#define MY_ERR KERN_ERR MY_LOGPREFIX -#define MY_NOTICE KERN_NOTICE MY_LOGPREFIX -#define MY_INFO KERN_INFO MY_LOGPREFIX - /* Toshiba ACPI method paths */ #define METHOD_LCD_BRIGHTNESS "\\_SB_.PCI0.VGA_.LCD_._BCM" #define TOSH_INTERFACE_1 "\\_SB_.VALD" @@ -301,7 +298,7 @@ static int toshiba_illumination_available(void) in[0] = 0xf100; status = hci_raw(in, out); if (ACPI_FAILURE(status)) { - printk(MY_INFO "Illumination device not available\n"); + pr_info("Illumination device not available\n"); return 0; } in[0] = 0xf400; @@ -320,7 +317,7 @@ static void toshiba_illumination_set(struct led_classdev *cdev, in[0] = 0xf100; status = hci_raw(in, out); if (ACPI_FAILURE(status)) { - printk(MY_INFO "Illumination device not available\n"); + pr_info("Illumination device not available\n"); return; } @@ -331,7 +328,7 @@ static void toshiba_illumination_set(struct led_classdev *cdev, in[2] = 1; status = hci_raw(in, out); if (ACPI_FAILURE(status)) { - printk(MY_INFO "ACPI call for illumination failed.\n"); + pr_info("ACPI call for illumination failed\n"); return; } } else { @@ -341,7 +338,7 @@ static void toshiba_illumination_set(struct led_classdev *cdev, in[2] = 0; status = hci_raw(in, out); if (ACPI_FAILURE(status)) { - printk(MY_INFO "ACPI call for illumination failed.\n"); + pr_info("ACPI call for illumination failed.\n"); return; } } @@ -364,7 +361,7 @@ static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev) in[0] = 0xf100; status = hci_raw(in, out); if (ACPI_FAILURE(status)) { - printk(MY_INFO "Illumination device not available\n"); + pr_info("Illumination device not available\n"); return LED_OFF; } @@ -373,7 +370,7 @@ static enum led_brightness toshiba_illumination_get(struct led_classdev *cdev) in[1] = 0x14e; status = hci_raw(in, out); if (ACPI_FAILURE(status)) { - printk(MY_INFO "ACPI call for illumination failed.\n"); + pr_info("ACPI call for illumination failed.\n"); return LED_OFF; } @@ -517,7 +514,7 @@ static int lcd_proc_show(struct seq_file *m, void *v) seq_printf(m, "brightness_levels: %d\n", HCI_LCD_BRIGHTNESS_LEVELS); } else { - printk(MY_ERR "Error reading LCD brightness\n"); + pr_err("Error reading LCD brightness\n"); } return 0; @@ -592,7 +589,7 @@ static int video_proc_show(struct seq_file *m, void *v) seq_printf(m, "crt_out: %d\n", is_crt); seq_printf(m, "tv_out: %d\n", is_tv); } else { - printk(MY_ERR "Error reading video out status\n"); + pr_err("Error reading video out status\n"); } return 0; @@ -686,7 +683,7 @@ static int fan_proc_show(struct seq_file *m, void *v) seq_printf(m, "running: %d\n", (value > 0)); seq_printf(m, "force_on: %d\n", force_fan); } else { - printk(MY_ERR "Error reading fan status\n"); + pr_err("Error reading fan status\n"); } return 0; @@ -750,9 +747,9 @@ static int keys_proc_show(struct seq_file *m, void *v) * some machines where system events sporadically * become disabled. */ hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result); - printk(MY_NOTICE "Re-enabled hotkeys\n"); + pr_notice("Re-enabled hotkeys\n"); } else { - printk(MY_ERR "Error reading hotkey status\n"); + pr_err("Error reading hotkey status\n"); goto end; } } @@ -863,7 +860,7 @@ static void toshiba_acpi_notify(acpi_handle handle, u32 event, void *context) if (!sparse_keymap_report_event(toshiba_acpi.hotkey_dev, value, 1, true)) { - printk(MY_INFO "Unknown key %x\n", + pr_info("Unknown key %x\n", value); } } else if (hci_result == HCI_NOT_SUPPORTED) { @@ -871,7 +868,7 @@ static void toshiba_acpi_notify(acpi_handle handle, u32 event, void *context) * some machines where system events sporadically * become disabled. */ hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result); - printk(MY_NOTICE "Re-enabled hotkeys\n"); + pr_notice("Re-enabled hotkeys\n"); } } while (hci_result != HCI_EMPTY); } @@ -883,13 +880,13 @@ static int __init toshiba_acpi_setup_keyboard(char *device) status = acpi_get_handle(NULL, device, &toshiba_acpi.handle); if (ACPI_FAILURE(status)) { - printk(MY_INFO "Unable to get notification device\n"); + pr_info("Unable to get notification device\n"); return -ENODEV; } toshiba_acpi.hotkey_dev = input_allocate_device(); if (!toshiba_acpi.hotkey_dev) { - printk(MY_INFO "Unable to register input device\n"); + pr_info("Unable to register input device\n"); return -ENOMEM; } @@ -905,21 +902,21 @@ static int __init toshiba_acpi_setup_keyboard(char *device) status = acpi_install_notify_handler(toshiba_acpi.handle, ACPI_DEVICE_NOTIFY, toshiba_acpi_notify, NULL); if (ACPI_FAILURE(status)) { - printk(MY_INFO "Unable to install hotkey notification\n"); + pr_info("Unable to install hotkey notification\n"); error = -ENODEV; goto err_free_keymap; } status = acpi_evaluate_object(toshiba_acpi.handle, "ENAB", NULL, NULL); if (ACPI_FAILURE(status)) { - printk(MY_INFO "Unable to enable hotkeys\n"); + pr_info("Unable to enable hotkeys\n"); error = -ENODEV; goto err_remove_notify; } error = input_register_device(toshiba_acpi.hotkey_dev); if (error) { - printk(MY_INFO "Unable to register input device\n"); + pr_info("Unable to register input device\n"); goto err_remove_notify; } @@ -980,17 +977,17 @@ static int __init toshiba_acpi_init(void) if (is_valid_acpi_path(TOSH_INTERFACE_1 GHCI_METHOD)) { method_hci = TOSH_INTERFACE_1 GHCI_METHOD; if (toshiba_acpi_setup_keyboard(TOSH_INTERFACE_1)) - printk(MY_INFO "Unable to activate hotkeys\n"); + pr_info("Unable to activate hotkeys\n"); } else if (is_valid_acpi_path(TOSH_INTERFACE_2 GHCI_METHOD)) { method_hci = TOSH_INTERFACE_2 GHCI_METHOD; if (toshiba_acpi_setup_keyboard(TOSH_INTERFACE_2)) - printk(MY_INFO "Unable to activate hotkeys\n"); + pr_info("Unable to activate hotkeys\n"); } else return -ENODEV; - printk(MY_INFO "Toshiba Laptop ACPI Extras version %s\n", + pr_info("Toshiba Laptop ACPI Extras version %s\n", TOSHIBA_ACPI_VERSION); - printk(MY_INFO " HCI method: %s\n", method_hci); + pr_info(" HCI method: %s\n", method_hci); mutex_init(&toshiba_acpi.mutex); @@ -998,7 +995,7 @@ static int __init toshiba_acpi_init(void) -1, NULL, 0); if (IS_ERR(toshiba_acpi.p_dev)) { ret = PTR_ERR(toshiba_acpi.p_dev); - printk(MY_ERR "unable to register platform device\n"); + pr_err("unable to register platform device\n"); toshiba_acpi.p_dev = NULL; toshiba_acpi_exit(); return ret; @@ -1028,7 +1025,7 @@ static int __init toshiba_acpi_init(void) if (IS_ERR(toshiba_backlight_device)) { ret = PTR_ERR(toshiba_backlight_device); - printk(KERN_ERR "Could not register toshiba backlight device\n"); + pr_err("Could not register toshiba backlight device\n"); toshiba_backlight_device = NULL; toshiba_acpi_exit(); return ret; @@ -1042,14 +1039,14 @@ static int __init toshiba_acpi_init(void) &toshiba_rfk_ops, &toshiba_acpi); if (!toshiba_acpi.bt_rfk) { - printk(MY_ERR "unable to allocate rfkill device\n"); + pr_err("unable to allocate rfkill device\n"); toshiba_acpi_exit(); return -ENOMEM; } ret = rfkill_register(toshiba_acpi.bt_rfk); if (ret) { - printk(MY_ERR "unable to register rfkill device\n"); + pr_err("unable to register rfkill device\n"); rfkill_destroy(toshiba_acpi.bt_rfk); toshiba_acpi_exit(); return ret; diff --git a/drivers/platform/x86/toshiba_bluetooth.c b/drivers/platform/x86/toshiba_bluetooth.c index 944068611919..5fb7186694df 100644 --- a/drivers/platform/x86/toshiba_bluetooth.c +++ b/drivers/platform/x86/toshiba_bluetooth.c @@ -17,6 +17,8 @@ * delivered. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -70,14 +72,13 @@ static int toshiba_bluetooth_enable(acpi_handle handle) if (!(result & 0x01)) return 0; - printk(KERN_INFO "toshiba_bluetooth: Re-enabling Toshiba Bluetooth\n"); + pr_info("Re-enabling Toshiba Bluetooth\n"); res1 = acpi_evaluate_object(handle, "AUSB", NULL, NULL); res2 = acpi_evaluate_object(handle, "BTPO", NULL, NULL); if (!ACPI_FAILURE(res1) || !ACPI_FAILURE(res2)) return 0; - printk(KERN_WARNING "toshiba_bluetooth: Failed to re-enable " - "Toshiba Bluetooth\n"); + pr_warn("Failed to re-enable Toshiba Bluetooth\n"); return -ENODEV; } @@ -107,8 +108,8 @@ static int toshiba_bt_rfkill_add(struct acpi_device *device) &bt_present); if (!ACPI_FAILURE(status) && bt_present) { - printk(KERN_INFO "Detected Toshiba ACPI Bluetooth device - " - "installing RFKill handler\n"); + pr_info("Detected Toshiba ACPI Bluetooth device - " + "installing RFKill handler\n"); result = toshiba_bluetooth_enable(device->handle); } -- cgit v1.2.3 From dd8e908e82964b8b493ef241707fb6109aa41cfd Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:53 -0700 Subject: wmi: Removed trailing whitespace from logging message. Just neatening. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/wmi.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 05cc79672a8b..f23d5a84e7b1 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -486,16 +486,16 @@ static void wmi_dump_wdg(const struct guid_block *g) pr_info("\tnotify_id: %02X\n", g->notify_id); pr_info("\treserved: %02X\n", g->reserved); pr_info("\tinstance_count: %d\n", g->instance_count); - pr_info("\tflags: %#x ", g->flags); + pr_info("\tflags: %#x", g->flags); if (g->flags) { if (g->flags & ACPI_WMI_EXPENSIVE) - pr_cont("ACPI_WMI_EXPENSIVE "); + pr_cont(" ACPI_WMI_EXPENSIVE"); if (g->flags & ACPI_WMI_METHOD) - pr_cont("ACPI_WMI_METHOD "); + pr_cont(" ACPI_WMI_METHOD"); if (g->flags & ACPI_WMI_STRING) - pr_cont("ACPI_WMI_STRING "); + pr_cont(" ACPI_WMI_STRING"); if (g->flags & ACPI_WMI_EVENT) - pr_cont("ACPI_WMI_EVENT "); + pr_cont(" ACPI_WMI_EVENT"); } pr_cont("\n"); -- cgit v1.2.3 From ad3f2f038fbd67f3341f760507aed90381114145 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Tue, 29 Mar 2011 15:21:54 -0700 Subject: xo15-ebook: Use pr_ Use the current logging styles. Remove local #define PREFIX. Add pr_fmt. Convert printk to pr_. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/xo15-ebook.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/xo15-ebook.c b/drivers/platform/x86/xo15-ebook.c index c1372ed9d2e9..fad153dc0355 100644 --- a/drivers/platform/x86/xo15-ebook.c +++ b/drivers/platform/x86/xo15-ebook.c @@ -11,6 +11,8 @@ * your option) any later version. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include #include #include @@ -20,7 +22,6 @@ #include #define MODULE_NAME "xo15-ebook" -#define PREFIX MODULE_NAME ": " #define XO15_EBOOK_CLASS MODULE_NAME #define XO15_EBOOK_TYPE_UNKNOWN 0x00 @@ -105,7 +106,7 @@ static int ebook_switch_add(struct acpi_device *device) class = acpi_device_class(device); if (strcmp(hid, XO15_EBOOK_HID)) { - printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid); + pr_err("Unsupported hid [%s]\n", hid); error = -ENODEV; goto err_free_input; } -- cgit v1.2.3 From 253a0069d7a222f7ad55f2c40f541a7648920c77 Mon Sep 17 00:00:00 2001 From: Ameya Palande Date: Fri, 1 Apr 2011 16:54:11 +0300 Subject: platform-x86: intel_mid_thermal: Fix coding style Before fixing checkpatch.pl reported 74 errors and 234 warnings Signed-off-by: Ameya Palande Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_mid_thermal.c | 606 +++++++++++++++---------------- 1 file changed, 300 insertions(+), 306 deletions(-) diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c index c2f4bd8013b5..f0776504521f 100644 --- a/drivers/platform/x86/intel_mid_thermal.c +++ b/drivers/platform/x86/intel_mid_thermal.c @@ -37,49 +37,50 @@ #include /* Number of thermal sensors */ -#define MSIC_THERMAL_SENSORS 4 +#define MSIC_THERMAL_SENSORS 4 /* ADC1 - thermal registers */ -#define MSIC_THERM_ADC1CNTL1 0x1C0 -#define MSIC_ADC_ENBL 0x10 -#define MSIC_ADC_START 0x08 +#define MSIC_THERM_ADC1CNTL1 0x1C0 +#define MSIC_ADC_ENBL 0x10 +#define MSIC_ADC_START 0x08 -#define MSIC_THERM_ADC1CNTL3 0x1C2 -#define MSIC_ADCTHERM_ENBL 0x04 -#define MSIC_ADCRRDATA_ENBL 0x05 -#define MSIC_CHANL_MASK_VAL 0x0F +#define MSIC_THERM_ADC1CNTL3 0x1C2 +#define MSIC_ADCTHERM_ENBL 0x04 +#define MSIC_ADCRRDATA_ENBL 0x05 +#define MSIC_CHANL_MASK_VAL 0x0F -#define MSIC_STOPBIT_MASK 16 -#define MSIC_ADCTHERM_MASK 4 -#define ADC_CHANLS_MAX 15 /* Number of ADC channels */ -#define ADC_LOOP_MAX (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS) +#define MSIC_STOPBIT_MASK 16 +#define MSIC_ADCTHERM_MASK 4 +/* Number of ADC channels */ +#define ADC_CHANLS_MAX 15 +#define ADC_LOOP_MAX (ADC_CHANLS_MAX - MSIC_THERMAL_SENSORS) /* ADC channel code values */ -#define SKIN_SENSOR0_CODE 0x08 -#define SKIN_SENSOR1_CODE 0x09 -#define SYS_SENSOR_CODE 0x0A -#define MSIC_DIE_SENSOR_CODE 0x03 +#define SKIN_SENSOR0_CODE 0x08 +#define SKIN_SENSOR1_CODE 0x09 +#define SYS_SENSOR_CODE 0x0A +#define MSIC_DIE_SENSOR_CODE 0x03 -#define SKIN_THERM_SENSOR0 0 -#define SKIN_THERM_SENSOR1 1 -#define SYS_THERM_SENSOR2 2 -#define MSIC_DIE_THERM_SENSOR3 3 +#define SKIN_THERM_SENSOR0 0 +#define SKIN_THERM_SENSOR1 1 +#define SYS_THERM_SENSOR2 2 +#define MSIC_DIE_THERM_SENSOR3 3 /* ADC code range */ -#define ADC_MAX 977 -#define ADC_MIN 162 -#define ADC_VAL0C 887 -#define ADC_VAL20C 720 -#define ADC_VAL40C 508 -#define ADC_VAL60C 315 +#define ADC_MAX 977 +#define ADC_MIN 162 +#define ADC_VAL0C 887 +#define ADC_VAL20C 720 +#define ADC_VAL40C 508 +#define ADC_VAL60C 315 /* ADC base addresses */ -#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */ -#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */ +#define ADC_CHNL_START_ADDR 0x1C5 /* increments by 1 */ +#define ADC_DATA_START_ADDR 0x1D4 /* increments by 2 */ /* MSIC die attributes */ -#define MSIC_DIE_ADC_MIN 488 -#define MSIC_DIE_ADC_MAX 1004 +#define MSIC_DIE_ADC_MIN 488 +#define MSIC_DIE_ADC_MAX 1004 /* This holds the address of the first free ADC channel, * among the 15 channels @@ -87,15 +88,15 @@ static int channel_index; struct platform_info { - struct platform_device *pdev; - struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS]; + struct platform_device *pdev; + struct thermal_zone_device *tzd[MSIC_THERMAL_SENSORS]; }; struct thermal_device_info { - unsigned int chnl_addr; - int direct; - /* This holds the current temperature in millidegree celsius */ - long curr_temp; + unsigned int chnl_addr; + int direct; + /* This holds the current temperature in millidegree celsius */ + long curr_temp; }; /** @@ -106,7 +107,7 @@ struct thermal_device_info { */ static int to_msic_die_temp(uint16_t adc_val) { - return (368 * (adc_val) / 1000) - 220; + return (368 * (adc_val) / 1000) - 220; } /** @@ -118,7 +119,7 @@ static int to_msic_die_temp(uint16_t adc_val) */ static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max) { - return (adc_val >= min) && (adc_val <= max); + return (adc_val >= min) && (adc_val <= max); } /** @@ -136,35 +137,35 @@ static int is_valid_adc(uint16_t adc_val, uint16_t min, uint16_t max) */ static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp) { - int temp; - - /* Direct conversion for die temperature */ - if (direct) { - if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) { - *tp = to_msic_die_temp(adc_val) * 1000; - return 0; - } - return -ERANGE; - } - - if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX)) - return -ERANGE; - - /* Linear approximation for skin temperature */ - if (adc_val > ADC_VAL0C) - temp = 177 - (adc_val/5); - else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C)) - temp = 111 - (adc_val/8); - else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C)) - temp = 92 - (adc_val/10); - else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C)) - temp = 91 - (adc_val/10); - else - temp = 112 - (adc_val/6); - - /* Convert temperature in celsius to milli degree celsius */ - *tp = temp * 1000; - return 0; + int temp; + + /* Direct conversion for die temperature */ + if (direct) { + if (is_valid_adc(adc_val, MSIC_DIE_ADC_MIN, MSIC_DIE_ADC_MAX)) { + *tp = to_msic_die_temp(adc_val) * 1000; + return 0; + } + return -ERANGE; + } + + if (!is_valid_adc(adc_val, ADC_MIN, ADC_MAX)) + return -ERANGE; + + /* Linear approximation for skin temperature */ + if (adc_val > ADC_VAL0C) + temp = 177 - (adc_val/5); + else if ((adc_val <= ADC_VAL0C) && (adc_val > ADC_VAL20C)) + temp = 111 - (adc_val/8); + else if ((adc_val <= ADC_VAL20C) && (adc_val > ADC_VAL40C)) + temp = 92 - (adc_val/10); + else if ((adc_val <= ADC_VAL40C) && (adc_val > ADC_VAL60C)) + temp = 91 - (adc_val/10); + else + temp = 112 - (adc_val/6); + + /* Convert temperature in celsius to milli degree celsius */ + *tp = temp * 1000; + return 0; } /** @@ -178,47 +179,47 @@ static int adc_to_temp(int direct, uint16_t adc_val, unsigned long *tp) */ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp) { - struct thermal_device_info *td_info = tzd->devdata; - uint16_t adc_val, addr; - uint8_t data = 0; - int ret; - unsigned long curr_temp; - - - addr = td_info->chnl_addr; - - /* Enable the msic for conversion before reading */ - ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL); - if (ret) - return ret; - - /* Re-toggle the RRDATARD bit (temporary workaround) */ - ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL); - if (ret) - return ret; - - /* Read the higher bits of data */ - ret = intel_scu_ipc_ioread8(addr, &data); - if (ret) - return ret; - - /* Shift bits to accommodate the lower two data bits */ - adc_val = (data << 2); - addr++; - - ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */ - if (ret) - return ret; - - /* Adding lower two bits to the higher bits */ - data &= 03; - adc_val += data; - - /* Convert ADC value to temperature */ - ret = adc_to_temp(td_info->direct, adc_val, &curr_temp); - if (ret == 0) - *temp = td_info->curr_temp = curr_temp; - return ret; + struct thermal_device_info *td_info = tzd->devdata; + uint16_t adc_val, addr; + uint8_t data = 0; + int ret; + unsigned long curr_temp; + + + addr = td_info->chnl_addr; + + /* Enable the msic for conversion before reading */ + ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCRRDATA_ENBL); + if (ret) + return ret; + + /* Re-toggle the RRDATARD bit (temporary workaround) */ + ret = intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL3, MSIC_ADCTHERM_ENBL); + if (ret) + return ret; + + /* Read the higher bits of data */ + ret = intel_scu_ipc_ioread8(addr, &data); + if (ret) + return ret; + + /* Shift bits to accommodate the lower two data bits */ + adc_val = (data << 2); + addr++; + + ret = intel_scu_ipc_ioread8(addr, &data);/* Read lower bits */ + if (ret) + return ret; + + /* Adding lower two bits to the higher bits */ + data &= 03; + adc_val += data; + + /* Convert ADC value to temperature */ + ret = adc_to_temp(td_info->direct, adc_val, &curr_temp); + if (ret == 0) + *temp = td_info->curr_temp = curr_temp; + return ret; } /** @@ -231,22 +232,21 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp) */ static int configure_adc(int val) { - int ret; - uint8_t data; - - ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); - if (ret) - return ret; - - if (val) { - /* Enable and start the ADC */ - data |= (MSIC_ADC_ENBL | MSIC_ADC_START); - } else { - /* Just stop the ADC */ - data &= (~MSIC_ADC_START); - } - - return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data); + int ret; + uint8_t data; + + ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); + if (ret) + return ret; + + if (val) { + /* Enable and start the ADC */ + data |= (MSIC_ADC_ENBL | MSIC_ADC_START); + } else { + /* Just stop the ADC */ + data &= (~MSIC_ADC_START); + } + return intel_scu_ipc_iowrite8(MSIC_THERM_ADC1CNTL1, data); } /** @@ -259,30 +259,30 @@ static int configure_adc(int val) */ static int set_up_therm_channel(u16 base_addr) { - int ret; - - /* Enable all the sensor channels */ - ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE); - if (ret) - return ret; - - ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE); - if (ret) - return ret; - - ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE); - if (ret) - return ret; - - /* Since this is the last channel, set the stop bit - to 1 by ORing the DIE_SENSOR_CODE with 0x10 */ - ret = intel_scu_ipc_iowrite8(base_addr + 3, - (MSIC_DIE_SENSOR_CODE | 0x10)); - if (ret) - return ret; - - /* Enable ADC and start it */ - return configure_adc(1); + int ret; + + /* Enable all the sensor channels */ + ret = intel_scu_ipc_iowrite8(base_addr, SKIN_SENSOR0_CODE); + if (ret) + return ret; + + ret = intel_scu_ipc_iowrite8(base_addr + 1, SKIN_SENSOR1_CODE); + if (ret) + return ret; + + ret = intel_scu_ipc_iowrite8(base_addr + 2, SYS_SENSOR_CODE); + if (ret) + return ret; + + /* Since this is the last channel, set the stop bit + * to 1 by ORing the DIE_SENSOR_CODE with 0x10 */ + ret = intel_scu_ipc_iowrite8(base_addr + 3, + (MSIC_DIE_SENSOR_CODE | 0x10)); + if (ret) + return ret; + + /* Enable ADC and start it */ + return configure_adc(1); } /** @@ -293,13 +293,13 @@ static int set_up_therm_channel(u16 base_addr) */ static int reset_stopbit(uint16_t addr) { - int ret; - uint8_t data; - ret = intel_scu_ipc_ioread8(addr, &data); - if (ret) - return ret; - /* Set the stop bit to zero */ - return intel_scu_ipc_iowrite8(addr, (data & 0xEF)); + int ret; + uint8_t data; + ret = intel_scu_ipc_ioread8(addr, &data); + if (ret) + return ret; + /* Set the stop bit to zero */ + return intel_scu_ipc_iowrite8(addr, (data & 0xEF)); } /** @@ -317,30 +317,30 @@ static int reset_stopbit(uint16_t addr) */ static int find_free_channel(void) { - int ret; - int i; - uint8_t data; - - /* check whether ADC is enabled */ - ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); - if (ret) - return ret; - - if ((data & MSIC_ADC_ENBL) == 0) - return 0; - - /* ADC is already enabled; Looking for an empty channel */ - for (i = 0; i < ADC_CHANLS_MAX; i++) { - ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data); - if (ret) - return ret; - - if (data & MSIC_STOPBIT_MASK) { - ret = i; - break; - } - } - return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret; + int ret; + int i; + uint8_t data; + + /* check whether ADC is enabled */ + ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL1, &data); + if (ret) + return ret; + + if ((data & MSIC_ADC_ENBL) == 0) + return 0; + + /* ADC is already enabled; Looking for an empty channel */ + for (i = 0; i < ADC_CHANLS_MAX; i++) { + ret = intel_scu_ipc_ioread8(ADC_CHNL_START_ADDR + i, &data); + if (ret) + return ret; + + if (data & MSIC_STOPBIT_MASK) { + ret = i; + break; + } + } + return (ret > ADC_LOOP_MAX) ? (-EINVAL) : ret; } /** @@ -351,48 +351,48 @@ static int find_free_channel(void) */ static int mid_initialize_adc(struct device *dev) { - u8 data; - u16 base_addr; - int ret; - - /* - * Ensure that adctherm is disabled before we - * initialize the ADC - */ - ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data); - if (ret) - return ret; - - if (data & MSIC_ADCTHERM_MASK) - dev_warn(dev, "ADCTHERM already set"); - - /* Index of the first channel in which the stop bit is set */ - channel_index = find_free_channel(); - if (channel_index < 0) { - dev_err(dev, "No free ADC channels"); - return channel_index; - } - - base_addr = ADC_CHNL_START_ADDR + channel_index; - - if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) { - /* Reset stop bit for channels other than 0 and 12 */ - ret = reset_stopbit(base_addr); - if (ret) - return ret; - - /* Index of the first free channel */ - base_addr++; - channel_index++; - } - - ret = set_up_therm_channel(base_addr); - if (ret) { - dev_err(dev, "unable to enable ADC"); - return ret; - } - dev_dbg(dev, "ADC initialization successful"); - return ret; + u8 data; + u16 base_addr; + int ret; + + /* + * Ensure that adctherm is disabled before we + * initialize the ADC + */ + ret = intel_scu_ipc_ioread8(MSIC_THERM_ADC1CNTL3, &data); + if (ret) + return ret; + + if (data & MSIC_ADCTHERM_MASK) + dev_warn(dev, "ADCTHERM already set"); + + /* Index of the first channel in which the stop bit is set */ + channel_index = find_free_channel(); + if (channel_index < 0) { + dev_err(dev, "No free ADC channels"); + return channel_index; + } + + base_addr = ADC_CHNL_START_ADDR + channel_index; + + if (!(channel_index == 0 || channel_index == ADC_LOOP_MAX)) { + /* Reset stop bit for channels other than 0 and 12 */ + ret = reset_stopbit(base_addr); + if (ret) + return ret; + + /* Index of the first free channel */ + base_addr++; + channel_index++; + } + + ret = set_up_therm_channel(base_addr); + if (ret) { + dev_err(dev, "unable to enable ADC"); + return ret; + } + dev_dbg(dev, "ADC initialization successful"); + return ret; } /** @@ -403,18 +403,18 @@ static int mid_initialize_adc(struct device *dev) */ static struct thermal_device_info *initialize_sensor(int index) { - struct thermal_device_info *td_info = - kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL); - - if (!td_info) - return NULL; - - /* Set the base addr of the channel for this sensor */ - td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index); - /* Sensor 3 is direct conversion */ - if (index == 3) - td_info->direct = 1; - return td_info; + struct thermal_device_info *td_info = + kzalloc(sizeof(struct thermal_device_info), GFP_KERNEL); + + if (!td_info) + return NULL; + + /* Set the base addr of the channel for this sensor */ + td_info->chnl_addr = ADC_DATA_START_ADDR + 2 * (channel_index + index); + /* Sensor 3 is direct conversion */ + if (index == 3) + td_info->direct = 1; + return td_info; } /** @@ -425,7 +425,7 @@ static struct thermal_device_info *initialize_sensor(int index) */ static int mid_thermal_resume(struct platform_device *pdev) { - return mid_initialize_adc(&pdev->dev); + return mid_initialize_adc(&pdev->dev); } /** @@ -437,12 +437,12 @@ static int mid_thermal_resume(struct platform_device *pdev) */ static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg) { - /* - * This just stops the ADC and does not disable it. - * temporary workaround until we have a generic ADC driver. - * If 0 is passed, it disables the ADC. - */ - return configure_adc(0); + /* + * This just stops the ADC and does not disable it. + * temporary workaround until we have a generic ADC driver. + * If 0 is passed, it disables the ADC. + */ + return configure_adc(0); } /** @@ -453,16 +453,15 @@ static int mid_thermal_suspend(struct platform_device *pdev, pm_message_t mesg) */ static int read_curr_temp(struct thermal_zone_device *tzd, unsigned long *temp) { - WARN_ON(tzd == NULL); - return mid_read_temp(tzd, temp); + WARN_ON(tzd == NULL); + return mid_read_temp(tzd, temp); } /* Can't be const */ static struct thermal_zone_device_ops tzd_ops = { - .get_temp = read_curr_temp, + .get_temp = read_curr_temp, }; - /** * mid_thermal_probe - mfld thermal initialize * @pdev: platform device structure @@ -472,46 +471,45 @@ static struct thermal_zone_device_ops tzd_ops = { */ static int mid_thermal_probe(struct platform_device *pdev) { - static char *name[MSIC_THERMAL_SENSORS] = { - "skin0", "skin1", "sys", "msicdie" - }; - - int ret; - int i; - struct platform_info *pinfo; - - pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL); - if (!pinfo) - return -ENOMEM; - - /* Initializing the hardware */ - ret = mid_initialize_adc(&pdev->dev); - if (ret) { - dev_err(&pdev->dev, "ADC init failed"); - kfree(pinfo); - return ret; - } - - /* Register each sensor with the generic thermal framework*/ - for (i = 0; i < MSIC_THERMAL_SENSORS; i++) { - pinfo->tzd[i] = thermal_zone_device_register(name[i], - 0, initialize_sensor(i), - &tzd_ops, 0, 0, 0, 0); - if (IS_ERR(pinfo->tzd[i])) - goto reg_fail; - } - - pinfo->pdev = pdev; - platform_set_drvdata(pdev, pinfo); - return 0; + static char *name[MSIC_THERMAL_SENSORS] = { + "skin0", "skin1", "sys", "msicdie" + }; + + int ret; + int i; + struct platform_info *pinfo; + + pinfo = kzalloc(sizeof(struct platform_info), GFP_KERNEL); + if (!pinfo) + return -ENOMEM; + + /* Initializing the hardware */ + ret = mid_initialize_adc(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, "ADC init failed"); + kfree(pinfo); + return ret; + } + + /* Register each sensor with the generic thermal framework*/ + for (i = 0; i < MSIC_THERMAL_SENSORS; i++) { + pinfo->tzd[i] = thermal_zone_device_register(name[i], + 0, initialize_sensor(i), &tzd_ops, 0, 0, 0, 0); + if (IS_ERR(pinfo->tzd[i])) + goto reg_fail; + } + + pinfo->pdev = pdev; + platform_set_drvdata(pdev, pinfo); + return 0; reg_fail: - ret = PTR_ERR(pinfo->tzd[i]); - while (--i >= 0) - thermal_zone_device_unregister(pinfo->tzd[i]); - configure_adc(0); - kfree(pinfo); - return ret; + ret = PTR_ERR(pinfo->tzd[i]); + while (--i >= 0) + thermal_zone_device_unregister(pinfo->tzd[i]); + configure_adc(0); + kfree(pinfo); + return ret; } /** @@ -523,49 +521,45 @@ reg_fail: */ static int mid_thermal_remove(struct platform_device *pdev) { - int i; - struct platform_info *pinfo = platform_get_drvdata(pdev); + int i; + struct platform_info *pinfo = platform_get_drvdata(pdev); - for (i = 0; i < MSIC_THERMAL_SENSORS; i++) - thermal_zone_device_unregister(pinfo->tzd[i]); + for (i = 0; i < MSIC_THERMAL_SENSORS; i++) + thermal_zone_device_unregister(pinfo->tzd[i]); - platform_set_drvdata(pdev, NULL); + platform_set_drvdata(pdev, NULL); - /* Stop the ADC */ - return configure_adc(0); + /* Stop the ADC */ + return configure_adc(0); } -/********************************************************************* - * Driver initialisation and finalization - *********************************************************************/ - #define DRIVER_NAME "msic_sensor" static const struct platform_device_id therm_id_table[] = { - { DRIVER_NAME, 1 }, - { } + { DRIVER_NAME, 1 }, + { } }; static struct platform_driver mid_thermal_driver = { - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, - .probe = mid_thermal_probe, - .suspend = mid_thermal_suspend, - .resume = mid_thermal_resume, - .remove = __devexit_p(mid_thermal_remove), - .id_table = therm_id_table, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = mid_thermal_probe, + .suspend = mid_thermal_suspend, + .resume = mid_thermal_resume, + .remove = __devexit_p(mid_thermal_remove), + .id_table = therm_id_table, }; static int __init mid_thermal_module_init(void) { - return platform_driver_register(&mid_thermal_driver); + return platform_driver_register(&mid_thermal_driver); } static void __exit mid_thermal_module_exit(void) { - platform_driver_unregister(&mid_thermal_driver); + platform_driver_unregister(&mid_thermal_driver); } module_init(mid_thermal_module_init); -- cgit v1.2.3 From 112a6ee053f9e9f014ab64f2549d3a25551aa349 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 4 Apr 2011 10:06:24 -0700 Subject: thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning Move TPACPI_HANDLE declaration into #ifdef block and neaten it a bit. Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/thinkpad_acpi.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 562fcf0dd2b5..7693e89459f0 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -535,15 +535,6 @@ TPACPI_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ "HKEY", /* all others */ ); /* 570 */ -TPACPI_HANDLE(vid, root, "\\_SB.PCI.AGP.VGA", /* 570 */ - "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ - "\\_SB.PCI0.VID0", /* 770e */ - "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ - "\\_SB.PCI0.AGP.VGA", /* X100e and a few others */ - "\\_SB.PCI0.AGP.VID", /* all others */ - ); /* R30, R31 */ - - /************************************************************************* * ACPI helpers */ @@ -4444,6 +4435,15 @@ static int video_orig_autosw; static int video_autosw_get(void); static int video_autosw_set(int enable); +TPACPI_HANDLE(vid, root, + "\\_SB.PCI.AGP.VGA", /* 570 */ + "\\_SB.PCI0.AGP0.VID0", /* 600e/x, 770x */ + "\\_SB.PCI0.VID0", /* 770e */ + "\\_SB.PCI0.VID", /* A21e, G4x, R50e, X30, X40 */ + "\\_SB.PCI0.AGP.VGA", /* X100e and a few others */ + "\\_SB.PCI0.AGP.VID", /* all others */ + ); /* R30, R31 */ + TPACPI_HANDLE(vid2, root, "\\_SB.PCI0.AGPB.VID"); /* G41 */ static int __init video_init(struct ibm_init_struct *iibm) -- cgit v1.2.3 From 0978e012cfbaca8bd312933e98cdea2d11778e11 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 4 Apr 2011 10:06:25 -0700 Subject: thinkpad_acpi: Convert printks to pr_ Add pr_fmt. Removed local TPACPI_ #defines, convert to pr_. Neaten dbg_ macros. Added a few missing newlines to logging messages. Added static inline str_supported for !CONFIG_THINKPAD_ACPI_DEBUG vdbg_printk defect reported by Sedat Dilek . Signed-off-by: Joe Perches Signed-off-by: Matthew Garrett --- drivers/platform/x86/thinkpad_acpi.c | 472 ++++++++++++++--------------------- 1 file changed, 188 insertions(+), 284 deletions(-) diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 7693e89459f0..77f6e707a2a9 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -21,6 +21,8 @@ * 02110-1301, USA. */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #define TPACPI_VERSION "0.24" #define TPACPI_SYSFS_VERSION 0x020700 @@ -224,17 +226,6 @@ enum tpacpi_hkey_event_t { #define TPACPI_MAX_ACPI_ARGS 3 -/* printk headers */ -#define TPACPI_LOG TPACPI_FILE ": " -#define TPACPI_EMERG KERN_EMERG TPACPI_LOG -#define TPACPI_ALERT KERN_ALERT TPACPI_LOG -#define TPACPI_CRIT KERN_CRIT TPACPI_LOG -#define TPACPI_ERR KERN_ERR TPACPI_LOG -#define TPACPI_WARN KERN_WARNING TPACPI_LOG -#define TPACPI_NOTICE KERN_NOTICE TPACPI_LOG -#define TPACPI_INFO KERN_INFO TPACPI_LOG -#define TPACPI_DEBUG KERN_DEBUG TPACPI_LOG - /* Debugging printk groups */ #define TPACPI_DBG_ALL 0xffff #define TPACPI_DBG_DISCLOSETASK 0x8000 @@ -389,34 +380,36 @@ static int tpacpi_uwb_emulstate; * Debugging helpers */ -#define dbg_printk(a_dbg_level, format, arg...) \ - do { if (dbg_level & (a_dbg_level)) \ - printk(TPACPI_DEBUG "%s: " format, __func__ , ## arg); \ - } while (0) +#define dbg_printk(a_dbg_level, format, arg...) \ +do { \ + if (dbg_level & (a_dbg_level)) \ + printk(KERN_DEBUG pr_fmt("%s: " format), \ + __func__, ##arg); \ +} while (0) #ifdef CONFIG_THINKPAD_ACPI_DEBUG #define vdbg_printk dbg_printk static const char *str_supported(int is_supported); #else -#define vdbg_printk(a_dbg_level, format, arg...) \ - do { } while (0) +static inline const char *str_supported(int is_supported) { return ""; } +#define vdbg_printk(a_dbg_level, format, arg...) \ + no_printk(format, ##arg) #endif static void tpacpi_log_usertask(const char * const what) { - printk(TPACPI_DEBUG "%s: access by process with PID %d\n", - what, task_tgid_vnr(current)); + printk(KERN_DEBUG pr_fmt("%s: access by process with PID %d\n"), + what, task_tgid_vnr(current)); } -#define tpacpi_disclose_usertask(what, format, arg...) \ - do { \ - if (unlikely( \ - (dbg_level & TPACPI_DBG_DISCLOSETASK) && \ - (tpacpi_lifecycle == TPACPI_LIFE_RUNNING))) { \ - printk(TPACPI_DEBUG "%s: PID %d: " format, \ - what, task_tgid_vnr(current), ## arg); \ - } \ - } while (0) +#define tpacpi_disclose_usertask(what, format, arg...) \ +do { \ + if (unlikely((dbg_level & TPACPI_DBG_DISCLOSETASK) && \ + (tpacpi_lifecycle == TPACPI_LIFE_RUNNING))) { \ + printk(KERN_DEBUG pr_fmt("%s: PID %d: " format), \ + what, task_tgid_vnr(current), ## arg); \ + } \ +} while (0) /* * Quirk handling helpers @@ -554,7 +547,7 @@ static int acpi_evalf(acpi_handle handle, int quiet; if (!*fmt) { - printk(TPACPI_ERR "acpi_evalf() called with empty format\n"); + pr_err("acpi_evalf() called with empty format\n"); return 0; } @@ -579,7 +572,7 @@ static int acpi_evalf(acpi_handle handle, break; /* add more types as needed */ default: - printk(TPACPI_ERR "acpi_evalf() called " + pr_err("acpi_evalf() called " "with invalid format character '%c'\n", c); va_end(ap); return 0; @@ -608,13 +601,13 @@ static int acpi_evalf(acpi_handle handle, break; /* add more types as needed */ default: - printk(TPACPI_ERR "acpi_evalf() called " + pr_err("acpi_evalf() called " "with invalid format character '%c'\n", res_type); return 0; } if (!success && !quiet) - printk(TPACPI_ERR "acpi_evalf(%s, %s, ...) failed: %s\n", + pr_err("acpi_evalf(%s, %s, ...) failed: %s\n", method, fmt0, acpi_format_exception(status)); return success; @@ -758,8 +751,7 @@ static int __init setup_acpi_notify(struct ibm_struct *ibm) rc = acpi_bus_get_device(*ibm->acpi->handle, &ibm->acpi->device); if (rc < 0) { - printk(TPACPI_ERR "acpi_bus_get_device(%s) failed: %d\n", - ibm->name, rc); + pr_err("acpi_bus_get_device(%s) failed: %d\n", ibm->name, rc); return -ENODEV; } @@ -772,12 +764,10 @@ static int __init setup_acpi_notify(struct ibm_struct *ibm) ibm->acpi->type, dispatch_acpi_notify, ibm); if (ACPI_FAILURE(status)) { if (status == AE_ALREADY_EXISTS) { - printk(TPACPI_NOTICE - "another device driver is already " - "handling %s events\n", ibm->name); + pr_notice("another device driver is already " + "handling %s events\n", ibm->name); } else { - printk(TPACPI_ERR - "acpi_install_notify_handler(%s) failed: %s\n", + pr_err("acpi_install_notify_handler(%s) failed: %s\n", ibm->name, acpi_format_exception(status)); } return -ENODEV; @@ -802,8 +792,7 @@ static int __init register_tpacpi_subdriver(struct ibm_struct *ibm) ibm->acpi->driver = kzalloc(sizeof(struct acpi_driver), GFP_KERNEL); if (!ibm->acpi->driver) { - printk(TPACPI_ERR - "failed to allocate memory for ibm->acpi->driver\n"); + pr_err("failed to allocate memory for ibm->acpi->driver\n"); return -ENOMEM; } @@ -814,7 +803,7 @@ static int __init register_tpacpi_subdriver(struct ibm_struct *ibm) rc = acpi_bus_register_driver(ibm->acpi->driver); if (rc < 0) { - printk(TPACPI_ERR "acpi_bus_register_driver(%s) failed: %d\n", + pr_err("acpi_bus_register_driver(%s) failed: %d\n", ibm->name, rc); kfree(ibm->acpi->driver); ibm->acpi->driver = NULL; @@ -1072,15 +1061,14 @@ static int parse_strtoul(const char *buf, static void tpacpi_disable_brightness_delay(void) { if (acpi_evalf(hkey_handle, NULL, "PWMS", "qvd", 0)) - printk(TPACPI_NOTICE - "ACPI backlight control delay disabled\n"); + pr_notice("ACPI backlight control delay disabled\n"); } static void printk_deprecated_attribute(const char * const what, const char * const details) { tpacpi_log_usertask("deprecated sysfs attribute"); - printk(TPACPI_WARN "WARNING: sysfs attribute %s is deprecated and " + pr_warn("WARNING: sysfs attribute %s is deprecated and " "will be removed. %s\n", what, details); } @@ -1255,8 +1243,7 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id, &tpacpi_rfk_rfkill_ops, atp_rfk); if (!atp_rfk || !atp_rfk->rfkill) { - printk(TPACPI_ERR - "failed to allocate memory for rfkill class\n"); + pr_err("failed to allocate memory for rfkill class\n"); kfree(atp_rfk); return -ENOMEM; } @@ -1266,9 +1253,8 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id, sw_status = (tp_rfkops->get_status)(); if (sw_status < 0) { - printk(TPACPI_ERR - "failed to read initial state for %s, error %d\n", - name, sw_status); + pr_err("failed to read initial state for %s, error %d\n", + name, sw_status); } else { sw_state = (sw_status == TPACPI_RFK_RADIO_OFF); if (set_default) { @@ -1282,9 +1268,7 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id, res = rfkill_register(atp_rfk->rfkill); if (res < 0) { - printk(TPACPI_ERR - "failed to register %s rfkill switch: %d\n", - name, res); + pr_err("failed to register %s rfkill switch: %d\n", name, res); rfkill_destroy(atp_rfk->rfkill); kfree(atp_rfk); return res; @@ -1292,7 +1276,7 @@ static int __init tpacpi_new_rfkill(const enum tpacpi_rfk_id id, tpacpi_rfkill_switches[id] = atp_rfk; - printk(TPACPI_INFO "rfkill switch %s: radio is %sblocked\n", + pr_info("rfkill switch %s: radio is %sblocked\n", name, (sw_state || hw_state) ? "" : "un"); return 0; } @@ -1816,10 +1800,8 @@ static void __init tpacpi_check_outdated_fw(void) * broken, or really stable to begin with, so it is * best if the user upgrades the firmware anyway. */ - printk(TPACPI_WARN - "WARNING: Outdated ThinkPad BIOS/EC firmware\n"); - printk(TPACPI_WARN - "WARNING: This firmware may be missing critical bug " + pr_warn("WARNING: Outdated ThinkPad BIOS/EC firmware\n"); + pr_warn("WARNING: This firmware may be missing critical bug " "fixes and/or important features\n"); } } @@ -2108,9 +2090,7 @@ void static hotkey_mask_warn_incomplete_mask(void) (hotkey_all_mask | TPACPI_HKEY_NVRAM_KNOWN_MASK); if (wantedmask) - printk(TPACPI_NOTICE - "required events 0x%08x not enabled!\n", - wantedmask); + pr_notice("required events 0x%08x not enabled!\n", wantedmask); } /* @@ -2148,10 +2128,9 @@ static int hotkey_mask_set(u32 mask) * a given event. */ if (!hotkey_mask_get() && !rc && (fwmask & ~hotkey_acpi_mask)) { - printk(TPACPI_NOTICE - "asked for hotkey mask 0x%08x, but " - "firmware forced it to 0x%08x\n", - fwmask, hotkey_acpi_mask); + pr_notice("asked for hotkey mask 0x%08x, but " + "firmware forced it to 0x%08x\n", + fwmask, hotkey_acpi_mask); } if (tpacpi_lifecycle != TPACPI_LIFE_EXITING) @@ -2175,13 +2154,11 @@ static int hotkey_user_mask_set(const u32 mask) (mask == 0xffff || mask == 0xffffff || mask == 0xffffffff)) { tp_warned.hotkey_mask_ff = 1; - printk(TPACPI_NOTICE - "setting the hotkey mask to 0x%08x is likely " - "not the best way to go about it\n", mask); - printk(TPACPI_NOTICE - "please consider using the driver defaults, " - "and refer to up-to-date thinkpad-acpi " - "documentation\n"); + pr_notice("setting the hotkey mask to 0x%08x is likely " + "not the best way to go about it\n", mask); + pr_notice("please consider using the driver defaults, " + "and refer to up-to-date thinkpad-acpi " + "documentation\n"); } /* Try to enable what the user asked for, plus whatever we need. @@ -2565,8 +2542,7 @@ static void hotkey_poll_setup(const bool may_warn) NULL, TPACPI_NVRAM_KTHREAD_NAME); if (IS_ERR(tpacpi_hotkey_task)) { tpacpi_hotkey_task = NULL; - printk(TPACPI_ERR - "could not create kernel thread " + pr_err("could not create kernel thread " "for hotkey polling\n"); } } @@ -2574,11 +2550,10 @@ static void hotkey_poll_setup(const bool may_warn) hotkey_poll_stop_sync(); if (may_warn && (poll_driver_mask || poll_user_mask) && hotkey_poll_freq == 0) { - printk(TPACPI_NOTICE - "hot keys 0x%08x and/or events 0x%08x " - "require polling, which is currently " - "disabled\n", - poll_user_mask, poll_driver_mask); + pr_notice("hot keys 0x%08x and/or events 0x%08x " + "require polling, which is currently " + "disabled\n", + poll_user_mask, poll_driver_mask); } } } @@ -2802,13 +2777,13 @@ static ssize_t hotkey_source_mask_store(struct device *dev, mutex_unlock(&hotkey_mutex); if (rc < 0) - printk(TPACPI_ERR "hotkey_source_mask: failed to update the" - "firmware event mask!\n"); + pr_err("hotkey_source_mask: " + "failed to update the firmware event mask!\n"); if (r_ev) - printk(TPACPI_NOTICE "hotkey_source_mask: " - "some important events were disabled: " - "0x%04x\n", r_ev); + pr_notice("hotkey_source_mask: " + "some important events were disabled: 0x%04x\n", + r_ev); tpacpi_disclose_usertask("hotkey_source_mask", "set to 0x%08lx\n", t); @@ -3039,8 +3014,7 @@ static void hotkey_exit(void) if (((tp_features.hotkey_mask && hotkey_mask_set(hotkey_orig_mask)) | hotkey_status_set(false)) != 0) - printk(TPACPI_ERR - "failed to restore hot key mask " + pr_err("failed to restore hot key mask " "to BIOS defaults\n"); } @@ -3279,10 +3253,9 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) for HKEY interface version 0x100 */ if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) { if ((hkeyv >> 8) != 1) { - printk(TPACPI_ERR "unknown version of the " - "HKEY interface: 0x%x\n", hkeyv); - printk(TPACPI_ERR "please report this to %s\n", - TPACPI_MAIL); + pr_err("unknown version of the HKEY interface: 0x%x\n", + hkeyv); + pr_err("please report this to %s\n", TPACPI_MAIL); } else { /* * MHKV 0x100 in A31, R40, R40e, @@ -3295,8 +3268,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) /* Paranoia check AND init hotkey_all_mask */ if (!acpi_evalf(hkey_handle, &hotkey_all_mask, "MHKA", "qd")) { - printk(TPACPI_ERR - "missing MHKA handler, " + pr_err("missing MHKA handler, " "please report this to %s\n", TPACPI_MAIL); /* Fallback: pre-init for FN+F3,F4,F12 */ @@ -3334,16 +3306,14 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) if (dbg_wlswemul) { tp_features.hotkey_wlsw = 1; radiosw_state = !!tpacpi_wlsw_emulstate; - printk(TPACPI_INFO - "radio switch emulation enabled\n"); + pr_info("radio switch emulation enabled\n"); } else #endif /* Not all thinkpads have a hardware radio switch */ if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) { tp_features.hotkey_wlsw = 1; radiosw_state = !!status; - printk(TPACPI_INFO - "radio switch found; radios are %s\n", + pr_info("radio switch found; radios are %s\n", enabled(status, 0)); } if (tp_features.hotkey_wlsw) @@ -3354,8 +3324,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) { tp_features.hotkey_tablet = 1; tabletsw_state = !!(status & TP_HOTKEY_TABLET_MASK); - printk(TPACPI_INFO - "possible tablet mode switch found; " + pr_info("possible tablet mode switch found; " "ThinkPad in %s mode\n", (tabletsw_state) ? "tablet" : "laptop"); res = add_to_attr_set(hotkey_dev_attributes, @@ -3373,8 +3342,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE, GFP_KERNEL); if (!hotkey_keycode_map) { - printk(TPACPI_ERR - "failed to allocate memory for key map\n"); + pr_err("failed to allocate memory for key map\n"); res = -ENOMEM; goto err_exit; } @@ -3417,13 +3385,11 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) * userspace. tpacpi_detect_brightness_capabilities() must have * been called before this point */ if (tp_features.bright_acpimode && acpi_video_backlight_support()) { - printk(TPACPI_INFO - "This ThinkPad has standard ACPI backlight " - "brightness control, supported by the ACPI " - "video driver\n"); - printk(TPACPI_NOTICE - "Disabling thinkpad-acpi brightness events " - "by default...\n"); + pr_info("This ThinkPad has standard ACPI backlight " + "brightness control, supported by the ACPI " + "video driver\n"); + pr_notice("Disabling thinkpad-acpi brightness events " + "by default...\n"); /* Disable brightness up/down on Lenovo thinkpads when * ACPI is handling them, otherwise it is plain impossible @@ -3530,8 +3496,7 @@ static bool hotkey_notify_wakeup(const u32 hkey, case TP_HKEY_EV_WKUP_S3_BATLOW: /* Battery on critical low level/S3 */ case TP_HKEY_EV_WKUP_S4_BATLOW: /* Battery on critical low level/S4 */ - printk(TPACPI_ALERT - "EMERGENCY WAKEUP: battery almost empty\n"); + pr_alert("EMERGENCY WAKEUP: battery almost empty\n"); /* how to auto-heal: */ /* 2313: woke up from S3, go to S4/S5 */ /* 2413: woke up from S4, go to S5 */ @@ -3542,9 +3507,7 @@ static bool hotkey_notify_wakeup(const u32 hkey, } if (hotkey_wakeup_reason != TP_ACPI_WAKEUP_NONE) { - printk(TPACPI_INFO - "woke up due to a hot-unplug " - "request...\n"); + pr_info("woke up due to a hot-unplug request...\n"); hotkey_wakeup_reason_notify_change(); } return true; @@ -3596,37 +3559,31 @@ static bool hotkey_notify_thermal(const u32 hkey, switch (hkey) { case TP_HKEY_EV_THM_TABLE_CHANGED: - printk(TPACPI_INFO - "EC reports that Thermal Table has changed\n"); + pr_info("EC reports that Thermal Table has changed\n"); /* recommended action: do nothing, we don't have * Lenovo ATM information */ return true; case TP_HKEY_EV_ALARM_BAT_HOT: - printk(TPACPI_CRIT - "THERMAL ALARM: battery is too hot!\n"); + pr_crit("THERMAL ALARM: battery is too hot!\n"); /* recommended action: warn user through gui */ break; case TP_HKEY_EV_ALARM_BAT_XHOT: - printk(TPACPI_ALERT - "THERMAL EMERGENCY: battery is extremely hot!\n"); + pr_alert("THERMAL EMERGENCY: battery is extremely hot!\n"); /* recommended action: immediate sleep/hibernate */ break; case TP_HKEY_EV_ALARM_SENSOR_HOT: - printk(TPACPI_CRIT - "THERMAL ALARM: " + pr_crit("THERMAL ALARM: " "a sensor reports something is too hot!\n"); /* recommended action: warn user through gui, that */ /* some internal component is too hot */ break; case TP_HKEY_EV_ALARM_SENSOR_XHOT: - printk(TPACPI_ALERT - "THERMAL EMERGENCY: " - "a sensor reports something is extremely hot!\n"); + pr_alert("THERMAL EMERGENCY: " + "a sensor reports something is extremely hot!\n"); /* recommended action: immediate sleep/hibernate */ break; default: - printk(TPACPI_ALERT - "THERMAL ALERT: unknown thermal alarm received\n"); + pr_alert("THERMAL ALERT: unknown thermal alarm received\n"); known = false; } @@ -3643,8 +3600,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) bool known_ev; if (event != 0x80) { - printk(TPACPI_ERR - "unknown HKEY notification event %d\n", event); + pr_err("unknown HKEY notification event %d\n", event); /* forward it to userspace, maybe it knows how to handle it */ acpi_bus_generate_netlink_event( ibm->acpi->device->pnp.device_class, @@ -3655,7 +3611,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) while (1) { if (!acpi_evalf(hkey_handle, &hkey, "MHKP", "d")) { - printk(TPACPI_ERR "failed to retrieve HKEY event\n"); + pr_err("failed to retrieve HKEY event\n"); return; } @@ -3683,8 +3639,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) switch (hkey) { case TP_HKEY_EV_BAYEJ_ACK: hotkey_autosleep_ack = 1; - printk(TPACPI_INFO - "bay ejected\n"); + pr_info("bay ejected\n"); hotkey_wakeup_hotunplug_complete_notify_change(); known_ev = true; break; @@ -3700,8 +3655,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) /* 0x4000-0x4FFF: dock-related wakeups */ if (hkey == TP_HKEY_EV_UNDOCK_ACK) { hotkey_autosleep_ack = 1; - printk(TPACPI_INFO - "undocked\n"); + pr_info("undocked\n"); hotkey_wakeup_hotunplug_complete_notify_change(); known_ev = true; } else { @@ -3732,11 +3686,9 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event) known_ev = false; } if (!known_ev) { - printk(TPACPI_NOTICE - "unhandled HKEY event 0x%04x\n", hkey); - printk(TPACPI_NOTICE - "please report the conditions when this " - "event happened to %s\n", TPACPI_MAIL); + pr_notice("unhandled HKEY event 0x%04x\n", hkey); + pr_notice("please report the conditions when this " + "event happened to %s\n", TPACPI_MAIL); } /* Legacy events */ @@ -3769,8 +3721,7 @@ static void hotkey_resume(void) if (hotkey_status_set(true) < 0 || hotkey_mask_set(hotkey_acpi_mask) < 0) - printk(TPACPI_ERR - "error while attempting to reset the event " + pr_err("error while attempting to reset the event " "firmware interface\n"); tpacpi_send_radiosw_update(); @@ -3815,14 +3766,12 @@ static void hotkey_enabledisable_warn(bool enable) { tpacpi_log_usertask("procfs hotkey enable/disable"); if (!WARN((tpacpi_lifecycle == TPACPI_LIFE_RUNNING || !enable), - TPACPI_WARN - "hotkey enable/disable functionality has been " - "removed from the driver. Hotkeys are always " - "enabled\n")) - printk(TPACPI_ERR - "Please remove the hotkey=enable module " - "parameter, it is deprecated. Hotkeys are always " - "enabled\n"); + pr_fmt("hotkey enable/disable functionality has been " + "removed from the driver. " + "Hotkeys are always enabled.\n"))) + pr_err("Please remove the hotkey=enable module " + "parameter, it is deprecated. " + "Hotkeys are always enabled.\n"); } static int hotkey_write(char *buf) @@ -4002,8 +3951,7 @@ static void bluetooth_shutdown(void) /* Order firmware to save current state to NVRAM */ if (!acpi_evalf(NULL, NULL, "\\BLTH", "vd", TP_ACPI_BLTH_SAVE_STATE)) - printk(TPACPI_NOTICE - "failed to save bluetooth state to NVRAM\n"); + pr_notice("failed to save bluetooth state to NVRAM\n"); else vdbg_printk(TPACPI_DBG_RFKILL, "bluestooth state saved to NVRAM\n"); @@ -4042,8 +3990,7 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm) #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_bluetoothemul) { tp_features.bluetooth = 1; - printk(TPACPI_INFO - "bluetooth switch emulation enabled\n"); + pr_info("bluetooth switch emulation enabled\n"); } else #endif if (tp_features.bluetooth && @@ -4194,8 +4141,7 @@ static void wan_shutdown(void) /* Order firmware to save current state to NVRAM */ if (!acpi_evalf(NULL, NULL, "\\WGSV", "vd", TP_ACPI_WGSV_SAVE_STATE)) - printk(TPACPI_NOTICE - "failed to save WWAN state to NVRAM\n"); + pr_notice("failed to save WWAN state to NVRAM\n"); else vdbg_printk(TPACPI_DBG_RFKILL, "WWAN state saved to NVRAM\n"); @@ -4232,8 +4178,7 @@ static int __init wan_init(struct ibm_init_struct *iibm) #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_wwanemul) { tp_features.wan = 1; - printk(TPACPI_INFO - "wwan switch emulation enabled\n"); + pr_info("wwan switch emulation enabled\n"); } else #endif if (tp_features.wan && @@ -4373,8 +4318,7 @@ static int __init uwb_init(struct ibm_init_struct *iibm) #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES if (dbg_uwbemul) { tp_features.uwb = 1; - printk(TPACPI_INFO - "uwb switch emulation enabled\n"); + pr_info("uwb switch emulation enabled\n"); } else #endif if (tp_features.uwb && @@ -4487,7 +4431,7 @@ static void video_exit(void) dbg_printk(TPACPI_DBG_EXIT, "restoring original video autoswitch mode\n"); if (video_autosw_set(video_orig_autosw)) - printk(TPACPI_ERR "error while trying to restore original " + pr_err("error while trying to restore original " "video autoswitch mode\n"); } @@ -4560,8 +4504,7 @@ static int video_outputsw_set(int status) res = acpi_evalf(vid_handle, NULL, "ASWT", "vdd", status * 0x100, 0); if (!autosw && video_autosw_set(autosw)) { - printk(TPACPI_ERR - "video auto-switch left enabled due to error\n"); + pr_err("video auto-switch left enabled due to error\n"); return -EIO; } break; @@ -4630,8 +4573,7 @@ static int video_outputsw_cycle(void) return -ENOSYS; } if (!autosw && video_autosw_set(autosw)) { - printk(TPACPI_ERR - "video auto-switch left enabled due to error\n"); + pr_err("video auto-switch left enabled due to error\n"); return -EIO; } @@ -5348,7 +5290,7 @@ static int __init led_init(struct ibm_init_struct *iibm) tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS, GFP_KERNEL); if (!tpacpi_leds) { - printk(TPACPI_ERR "Out of memory for LED data\n"); + pr_err("Out of memory for LED data\n"); return -ENOMEM; } @@ -5367,9 +5309,8 @@ static int __init led_init(struct ibm_init_struct *iibm) } #ifdef CONFIG_THINKPAD_ACPI_UNSAFE_LEDS - printk(TPACPI_NOTICE - "warning: userspace override of important " - "firmware LEDs is enabled\n"); + pr_notice("warning: userspace override of important " + "firmware LEDs is enabled\n"); #endif return 0; } @@ -5639,17 +5580,16 @@ static void thermal_dump_all_sensors(void) if (n <= 0) return; - printk(TPACPI_NOTICE - "temperatures (Celsius):"); + pr_notice("temperatures (Celsius):"); for (i = 0; i < n; i++) { if (t.temp[i] != TPACPI_THERMAL_SENSOR_NA) - printk(KERN_CONT " %d", (int)(t.temp[i] / 1000)); + pr_cont(" %d", (int)(t.temp[i] / 1000)); else - printk(KERN_CONT " N/A"); + pr_cont(" N/A"); } - printk(KERN_CONT "\n"); + pr_cont("\n"); } /* sysfs temp##_input -------------------------------------------------- */ @@ -5769,14 +5709,12 @@ static int __init thermal_init(struct ibm_init_struct *iibm) if (ta1 == 0) { /* This is sheer paranoia, but we handle it anyway */ if (acpi_tmp7) { - printk(TPACPI_ERR - "ThinkPad ACPI EC access misbehaving, " + pr_err("ThinkPad ACPI EC access misbehaving, " "falling back to ACPI TMPx access " "mode\n"); thermal_read_mode = TPACPI_THERMAL_ACPI_TMP07; } else { - printk(TPACPI_ERR - "ThinkPad ACPI EC access misbehaving, " + pr_err("ThinkPad ACPI EC access misbehaving, " "disabling thermal sensors access\n"); thermal_read_mode = TPACPI_THERMAL_NONE; } @@ -6129,8 +6067,8 @@ static int __init tpacpi_query_bcl_levels(acpi_handle handle) if (ACPI_SUCCESS(acpi_evaluate_object(handle, "_BCL", NULL, &buffer))) { obj = (union acpi_object *)buffer.pointer; if (!obj || (obj->type != ACPI_TYPE_PACKAGE)) { - printk(TPACPI_ERR "Unknown _BCL data, " - "please report this to %s\n", TPACPI_MAIL); + pr_err("Unknown _BCL data, please report this to %s\n", + TPACPI_MAIL); rc = 0; } else { rc = obj->package.count; @@ -6214,18 +6152,15 @@ static void __init tpacpi_detect_brightness_capabilities(void) switch (b) { case 16: bright_maxlvl = 15; - printk(TPACPI_INFO - "detected a 16-level brightness capable ThinkPad\n"); + pr_info("detected a 16-level brightness capable ThinkPad\n"); break; case 8: case 0: bright_maxlvl = 7; - printk(TPACPI_INFO - "detected a 8-level brightness capable ThinkPad\n"); + pr_info("detected a 8-level brightness capable ThinkPad\n"); break; default: - printk(TPACPI_ERR - "Unsupported brightness interface, " + pr_err("Unsupported brightness interface, " "please contact %s\n", TPACPI_MAIL); tp_features.bright_unkfw = 1; bright_maxlvl = b - 1; @@ -6260,22 +6195,19 @@ static int __init brightness_init(struct ibm_init_struct *iibm) if (acpi_video_backlight_support()) { if (brightness_enable > 1) { - printk(TPACPI_INFO - "Standard ACPI backlight interface " - "available, not loading native one.\n"); + pr_info("Standard ACPI backlight interface " + "available, not loading native one\n"); return 1; } else if (brightness_enable == 1) { - printk(TPACPI_WARN - "Cannot enable backlight brightness support, " + pr_warn("Cannot enable backlight brightness support, " "ACPI is already handling it. Refer to the " - "acpi_backlight kernel parameter\n"); + "acpi_backlight kernel parameter.\n"); return 1; } } else if (tp_features.bright_acpimode && brightness_enable > 1) { - printk(TPACPI_NOTICE - "Standard ACPI backlight interface not " - "available, thinkpad_acpi native " - "brightness control enabled\n"); + pr_notice("Standard ACPI backlight interface not " + "available, thinkpad_acpi native " + "brightness control enabled\n"); } /* @@ -6319,19 +6251,17 @@ static int __init brightness_init(struct ibm_init_struct *iibm) if (IS_ERR(ibm_backlight_device)) { int rc = PTR_ERR(ibm_backlight_device); ibm_backlight_device = NULL; - printk(TPACPI_ERR "Could not register backlight device\n"); + pr_err("Could not register backlight device\n"); return rc; } vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT, "brightness is supported\n"); if (quirks & TPACPI_BRGHT_Q_ASK) { - printk(TPACPI_NOTICE - "brightness: will use unverified default: " - "brightness_mode=%d\n", brightness_mode); - printk(TPACPI_NOTICE - "brightness: please report to %s whether it works well " - "or not on your ThinkPad\n", TPACPI_MAIL); + pr_notice("brightness: will use unverified default: " + "brightness_mode=%d\n", brightness_mode); + pr_notice("brightness: please report to %s whether it works well " + "or not on your ThinkPad\n", TPACPI_MAIL); } /* Added by mistake in early 2007. Probably useless, but it could @@ -6804,8 +6734,7 @@ static int __init volume_create_alsa_mixer(void) rc = snd_card_create(alsa_index, alsa_id, THIS_MODULE, sizeof(struct tpacpi_alsa_data), &card); if (rc < 0 || !card) { - printk(TPACPI_ERR - "Failed to create ALSA card structures: %d\n", rc); + pr_err("Failed to create ALSA card structures: %d\n", rc); return 1; } @@ -6839,9 +6768,8 @@ static int __init volume_create_alsa_mixer(void) ctl_vol = snd_ctl_new1(&volume_alsa_control_vol, NULL); rc = snd_ctl_add(card, ctl_vol); if (rc < 0) { - printk(TPACPI_ERR - "Failed to create ALSA volume control: %d\n", - rc); + pr_err("Failed to create ALSA volume control: %d\n", + rc); goto err_exit; } data->ctl_vol_id = &ctl_vol->id; @@ -6850,8 +6778,7 @@ static int __init volume_create_alsa_mixer(void) ctl_mute = snd_ctl_new1(&volume_alsa_control_mute, NULL); rc = snd_ctl_add(card, ctl_mute); if (rc < 0) { - printk(TPACPI_ERR "Failed to create ALSA mute control: %d\n", - rc); + pr_err("Failed to create ALSA mute control: %d\n", rc); goto err_exit; } data->ctl_mute_id = &ctl_mute->id; @@ -6859,7 +6786,7 @@ static int __init volume_create_alsa_mixer(void) snd_card_set_dev(card, &tpacpi_pdev->dev); rc = snd_card_register(card); if (rc < 0) { - printk(TPACPI_ERR "Failed to register ALSA card: %d\n", rc); + pr_err("Failed to register ALSA card: %d\n", rc); goto err_exit; } @@ -6915,9 +6842,8 @@ static int __init volume_init(struct ibm_init_struct *iibm) return -EINVAL; if (volume_mode == TPACPI_VOL_MODE_UCMS_STEP) { - printk(TPACPI_ERR - "UCMS step volume mode not implemented, " - "please contact %s\n", TPACPI_MAIL); + pr_err("UCMS step volume mode not implemented, " + "please contact %s\n", TPACPI_MAIL); return 1; } @@ -6981,13 +6907,11 @@ static int __init volume_init(struct ibm_init_struct *iibm) rc = volume_create_alsa_mixer(); if (rc) { - printk(TPACPI_ERR - "Could not create the ALSA mixer interface\n"); + pr_err("Could not create the ALSA mixer interface\n"); return rc; } - printk(TPACPI_INFO - "Console audio control enabled, mode: %s\n", + pr_info("Console audio control enabled, mode: %s\n", (volume_control_allowed) ? "override (read/write)" : "monitor (read only)"); @@ -7049,12 +6973,10 @@ static int volume_write(char *buf) if (!volume_control_allowed && tpacpi_lifecycle != TPACPI_LIFE_INIT) { if (unlikely(!tp_warned.volume_ctrl_forbidden)) { tp_warned.volume_ctrl_forbidden = 1; - printk(TPACPI_NOTICE - "Console audio control in monitor mode, " - "changes are not allowed.\n"); - printk(TPACPI_NOTICE - "Use the volume_control=1 module parameter " - "to enable volume control\n"); + pr_notice("Console audio control in monitor mode, " + "changes are not allowed\n"); + pr_notice("Use the volume_control=1 module parameter " + "to enable volume control\n"); } return -EPERM; } @@ -7129,8 +7051,7 @@ static void inline volume_alsa_notify_change(void) static int __init volume_init(struct ibm_init_struct *iibm) { - printk(TPACPI_INFO - "volume: disabled as there is no ALSA support in this kernel\n"); + pr_info("volume: disabled as there is no ALSA support in this kernel\n"); return 1; } @@ -7337,9 +7258,8 @@ TPACPI_HANDLE(sfan, ec, "SFAN", /* 570 */ static void fan_quirk1_setup(void) { if (fan_control_initial_status == 0x07) { - printk(TPACPI_NOTICE - "fan_init: initial fan status is unknown, " - "assuming it is in auto mode\n"); + pr_notice("fan_init: initial fan status is unknown, " + "assuming it is in auto mode\n"); tp_features.fan_ctrl_status_undef = 1; } } @@ -7726,8 +7646,7 @@ static void fan_watchdog_reset(void) if (!queue_delayed_work(tpacpi_wq, &fan_watchdog_task, msecs_to_jiffies(fan_watchdog_maxinterval * 1000))) { - printk(TPACPI_ERR - "failed to queue the fan watchdog, " + pr_err("failed to queue the fan watchdog, " "watchdog will not trigger\n"); } } else @@ -7741,11 +7660,11 @@ static void fan_watchdog_fire(struct work_struct *ignored) if (tpacpi_lifecycle != TPACPI_LIFE_RUNNING) return; - printk(TPACPI_NOTICE "fan watchdog: enabling fan\n"); + pr_notice("fan watchdog: enabling fan\n"); rc = fan_set_enable(); if (rc < 0) { - printk(TPACPI_ERR "fan watchdog: error %d while enabling fan, " - "will try again later...\n", -rc); + pr_err("fan watchdog: error %d while enabling fan, " + "will try again later...\n", -rc); /* reschedule for later */ fan_watchdog_reset(); } @@ -8049,8 +7968,7 @@ static int __init fan_init(struct ibm_init_struct *iibm) "secondary fan support enabled\n"); } } else { - printk(TPACPI_ERR - "ThinkPad ACPI EC access misbehaving, " + pr_err("ThinkPad ACPI EC access misbehaving, " "fan status and control unavailable\n"); return 1; } @@ -8150,9 +8068,8 @@ static void fan_suspend(pm_message_t state) fan_control_resume_level = 0; rc = fan_get_status_safe(&fan_control_resume_level); if (rc < 0) - printk(TPACPI_NOTICE - "failed to read fan level for later " - "restore during resume: %d\n", rc); + pr_notice("failed to read fan level for later " + "restore during resume: %d\n", rc); /* if it is undefined, don't attempt to restore it. * KEEP THIS LAST */ @@ -8207,13 +8124,11 @@ static void fan_resume(void) return; } if (do_set) { - printk(TPACPI_NOTICE - "restoring fan level to 0x%02x\n", - fan_control_resume_level); + pr_notice("restoring fan level to 0x%02x\n", + fan_control_resume_level); rc = fan_set_level_safe(fan_control_resume_level); if (rc < 0) - printk(TPACPI_NOTICE - "failed to restore fan level: %d\n", rc); + pr_notice("failed to restore fan level: %d\n", rc); } } @@ -8305,8 +8220,8 @@ static int fan_write_cmd_level(const char *cmd, int *rc) *rc = fan_set_level_safe(level); if (*rc == -ENXIO) - printk(TPACPI_ERR "level command accepted for unsupported " - "access mode %d", fan_control_access_mode); + pr_err("level command accepted for unsupported access mode %d\n", + fan_control_access_mode); else if (!*rc) tpacpi_disclose_usertask("procfs fan", "set level to %d\n", level); @@ -8321,8 +8236,8 @@ static int fan_write_cmd_enable(const char *cmd, int *rc) *rc = fan_set_enable(); if (*rc == -ENXIO) - printk(TPACPI_ERR "enable command accepted for unsupported " - "access mode %d", fan_control_access_mode); + pr_err("enable command accepted for unsupported access mode %d\n", + fan_control_access_mode); else if (!*rc) tpacpi_disclose_usertask("procfs fan", "enable\n"); @@ -8336,8 +8251,8 @@ static int fan_write_cmd_disable(const char *cmd, int *rc) *rc = fan_set_disable(); if (*rc == -ENXIO) - printk(TPACPI_ERR "disable command accepted for unsupported " - "access mode %d", fan_control_access_mode); + pr_err("disable command accepted for unsupported access mode %d\n", + fan_control_access_mode); else if (!*rc) tpacpi_disclose_usertask("procfs fan", "disable\n"); @@ -8356,8 +8271,8 @@ static int fan_write_cmd_speed(const char *cmd, int *rc) *rc = fan_set_speed(speed); if (*rc == -ENXIO) - printk(TPACPI_ERR "speed command accepted for unsupported " - "access mode %d", fan_control_access_mode); + pr_err("speed command accepted for unsupported access mode %d\n", + fan_control_access_mode); else if (!*rc) tpacpi_disclose_usertask("procfs fan", "set speed to %d\n", speed); @@ -8560,8 +8475,8 @@ static int __init ibm_init(struct ibm_init_struct *iibm) if (ibm->acpi->notify) { ret = setup_acpi_notify(ibm); if (ret == -ENODEV) { - printk(TPACPI_NOTICE "disabling subdriver %s\n", - ibm->name); + pr_notice("disabling subdriver %s\n", + ibm->name); ret = 0; goto err_out; } @@ -8583,8 +8498,7 @@ static int __init ibm_init(struct ibm_init_struct *iibm) entry = proc_create_data(ibm->name, mode, proc_dir, &dispatch_proc_fops, ibm); if (!entry) { - printk(TPACPI_ERR "unable to create proc entry %s\n", - ibm->name); + pr_err("unable to create proc entry %s\n", ibm->name); ret = -ENODEV; goto err_out; } @@ -8683,13 +8597,11 @@ static int __must_check __init get_thinkpad_model_data( tp->ec_release = (ec_fw_string[4] << 8) | ec_fw_string[5]; } else { - printk(TPACPI_NOTICE - "ThinkPad firmware release %s " - "doesn't match the known patterns\n", - ec_fw_string); - printk(TPACPI_NOTICE - "please report this to %s\n", - TPACPI_MAIL); + pr_notice("ThinkPad firmware release %s " + "doesn't match the known patterns\n", + ec_fw_string); + pr_notice("please report this to %s\n", + TPACPI_MAIL); } break; } @@ -8733,8 +8645,7 @@ static int __init probe_for_thinkpad(void) tpacpi_acpi_handle_locate("ec", TPACPI_ACPI_EC_HID, &ec_handle); if (!ec_handle) { if (is_thinkpad) - printk(TPACPI_ERR - "Not yet supported ThinkPad detected!\n"); + pr_err("Not yet supported ThinkPad detected!\n"); return -ENODEV; } @@ -8746,10 +8657,10 @@ static int __init probe_for_thinkpad(void) static void __init thinkpad_acpi_init_banner(void) { - printk(TPACPI_INFO "%s v%s\n", TPACPI_DESC, TPACPI_VERSION); - printk(TPACPI_INFO "%s\n", TPACPI_URL); + pr_info("%s v%s\n", TPACPI_DESC, TPACPI_VERSION); + pr_info("%s\n", TPACPI_URL); - printk(TPACPI_INFO "ThinkPad BIOS %s, EC %s\n", + pr_info("ThinkPad BIOS %s, EC %s\n", (thinkpad_id.bios_version_str) ? thinkpad_id.bios_version_str : "unknown", (thinkpad_id.ec_version_str) ? @@ -8758,7 +8669,7 @@ static void __init thinkpad_acpi_init_banner(void) BUG_ON(!thinkpad_id.vendor); if (thinkpad_id.model_str) - printk(TPACPI_INFO "%s %s, model %s\n", + pr_info("%s %s, model %s\n", (thinkpad_id.vendor == PCI_VENDOR_ID_IBM) ? "IBM" : ((thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) ? @@ -9024,8 +8935,7 @@ static int __init thinkpad_acpi_module_init(void) ret = get_thinkpad_model_data(&thinkpad_id); if (ret) { - printk(TPACPI_ERR - "unable to get DMI data: %d\n", ret); + pr_err("unable to get DMI data: %d\n", ret); thinkpad_acpi_module_exit(); return ret; } @@ -9051,16 +8961,14 @@ static int __init thinkpad_acpi_module_init(void) proc_dir = proc_mkdir(TPACPI_PROC_DIR, acpi_root_dir); if (!proc_dir) { - printk(TPACPI_ERR - "unable to create proc dir " TPACPI_PROC_DIR); + pr_err("unable to create proc dir " TPACPI_PROC_DIR "\n"); thinkpad_acpi_module_exit(); return -ENODEV; } ret = platform_driver_register(&tpacpi_pdriver); if (ret) { - printk(TPACPI_ERR - "unable to register main platform driver\n"); + pr_err("unable to register main platform driver\n"); thinkpad_acpi_module_exit(); return ret; } @@ -9068,8 +8976,7 @@ static int __init thinkpad_acpi_module_init(void) ret = platform_driver_register(&tpacpi_hwmon_pdriver); if (ret) { - printk(TPACPI_ERR - "unable to register hwmon platform driver\n"); + pr_err("unable to register hwmon platform driver\n"); thinkpad_acpi_module_exit(); return ret; } @@ -9082,8 +8989,7 @@ static int __init thinkpad_acpi_module_init(void) &tpacpi_hwmon_pdriver.driver); } if (ret) { - printk(TPACPI_ERR - "unable to create sysfs driver attributes\n"); + pr_err("unable to create sysfs driver attributes\n"); thinkpad_acpi_module_exit(); return ret; } @@ -9096,7 +9002,7 @@ static int __init thinkpad_acpi_module_init(void) if (IS_ERR(tpacpi_pdev)) { ret = PTR_ERR(tpacpi_pdev); tpacpi_pdev = NULL; - printk(TPACPI_ERR "unable to register platform device\n"); + pr_err("unable to register platform device\n"); thinkpad_acpi_module_exit(); return ret; } @@ -9106,16 +9012,14 @@ static int __init thinkpad_acpi_module_init(void) if (IS_ERR(tpacpi_sensors_pdev)) { ret = PTR_ERR(tpacpi_sensors_pdev); tpacpi_sensors_pdev = NULL; - printk(TPACPI_ERR - "unable to register hwmon platform device\n"); + pr_err("unable to register hwmon platform device\n"); thinkpad_acpi_module_exit(); return ret; } ret = device_create_file(&tpacpi_sensors_pdev->dev, &dev_attr_thinkpad_acpi_pdev_name); if (ret) { - printk(TPACPI_ERR - "unable to create sysfs hwmon device attributes\n"); + pr_err("unable to create sysfs hwmon device attributes\n"); thinkpad_acpi_module_exit(); return ret; } @@ -9124,14 +9028,14 @@ static int __init thinkpad_acpi_module_init(void) if (IS_ERR(tpacpi_hwmon)) { ret = PTR_ERR(tpacpi_hwmon); tpacpi_hwmon = NULL; - printk(TPACPI_ERR "unable to register hwmon device\n"); + pr_err("unable to register hwmon device\n"); thinkpad_acpi_module_exit(); return ret; } mutex_init(&tpacpi_inputdev_send_mutex); tpacpi_inputdev = input_allocate_device(); if (!tpacpi_inputdev) { - printk(TPACPI_ERR "unable to allocate input device\n"); + pr_err("unable to allocate input device\n"); thinkpad_acpi_module_exit(); return -ENOMEM; } else { @@ -9163,7 +9067,7 @@ static int __init thinkpad_acpi_module_init(void) ret = input_register_device(tpacpi_inputdev); if (ret < 0) { - printk(TPACPI_ERR "unable to register input device\n"); + pr_err("unable to register input device\n"); thinkpad_acpi_module_exit(); return ret; } else { -- cgit v1.2.3 From bb3ce2020451bdebe5ceac770504f427724008a9 Mon Sep 17 00:00:00 2001 From: Yin Kangkai Date: Wed, 6 Apr 2011 15:05:24 +0100 Subject: platform/oaktrail: ACPI EC Extra driver for Oaktrail This driver implements an Extra ACPI EC driver for products based on Intel Oaktrail platform. This driver does below things: 1. registers itself in the Linux backlight control in /sys/class/backlight/intel_oaktrail/ 2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/ for these components: wifi, bluetooth, wwan (3g), gps Signed-off-by: Yin Kangkai [Extracted from a bigger patch by Yin Kangkai, this version leaves out some sysfs bits that probably want to be driver managed, and ACPI i2c enumeration] Signed-off-by: Alan Cox Signed-off-by: Matthew Garrett --- drivers/platform/x86/Kconfig | 9 + drivers/platform/x86/Makefile | 1 + drivers/platform/x86/intel_oaktrail.c | 396 ++++++++++++++++++++++++++++++++++ 3 files changed, 406 insertions(+) create mode 100644 drivers/platform/x86/intel_oaktrail.c diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 5cb999b50f95..83c2411acb5b 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -760,4 +760,13 @@ config MXM_WMI MXM is a standard for laptop graphics cards, the WMI interface is required for switchable nvidia graphics machines +config INTEL_OAKTRAIL + tristate "Intel Oaktrail Platform Extras" + depends on ACPI + depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI + ---help--- + Intel Oaktrail platform need this driver to provide interfaces to + enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y + here; it will only load on supported platforms. + endif # X86_PLATFORM_DEVICES diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index a7ab3bc7b3a1..af683fb5a807 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -43,3 +43,4 @@ obj-$(CONFIG_IBM_RTL) += ibm_rtl.o obj-$(CONFIG_SAMSUNG_LAPTOP) += samsung-laptop.o obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o obj-$(CONFIG_MXM_WMI) += mxm-wmi.o +obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c new file mode 100644 index 000000000000..e936364a609d --- /dev/null +++ b/drivers/platform/x86/intel_oaktrail.c @@ -0,0 +1,396 @@ +/* + * intel_oaktrail.c - Intel OakTrail Platform support. + * + * Copyright (C) 2010-2011 Intel Corporation + * Author: Yin Kangkai (kangkai.yin@intel.com) + * + * based on Compal driver, Copyright (C) 2008 Cezary Jackiewicz + * , based on MSI driver + * Copyright (C) 2006 Lennart Poettering + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * This driver does below things: + * 1. registers itself in the Linux backlight control in + * /sys/class/backlight/intel_oaktrail/ + * + * 2. registers in the rfkill subsystem here: /sys/class/rfkill/rfkillX/ + * for these components: wifi, bluetooth, wwan (3g), gps + * + * This driver might work on other products based on Oaktrail. If you + * want to try it you can pass force=1 as argument to the module which + * will force it to load even when the DMI data doesn't identify the + * product as compatible. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +#define DRIVER_NAME "intel_oaktrail" +#define DRIVER_VERSION "0.4ac1" + +/* + * This is the devices status address in EC space, and the control bits + * definition: + * + * (1 << 0): Camera enable/disable, RW. + * (1 << 1): Bluetooth enable/disable, RW. + * (1 << 2): GPS enable/disable, RW. + * (1 << 3): WiFi enable/disable, RW. + * (1 << 4): WWAN (3G) enable/disalbe, RW. + * (1 << 5): Touchscreen enable/disable, Read Only. + */ +#define OT_EC_DEVICE_STATE_ADDRESS 0xD6 + +#define OT_EC_CAMERA_MASK (1 << 0) +#define OT_EC_BT_MASK (1 << 1) +#define OT_EC_GPS_MASK (1 << 2) +#define OT_EC_WIFI_MASK (1 << 3) +#define OT_EC_WWAN_MASK (1 << 4) +#define OT_EC_TS_MASK (1 << 5) + +/* + * This is the address in EC space and commands used to control LCD backlight: + * + * Two steps needed to change the LCD backlight: + * 1. write the backlight percentage into OT_EC_BL_BRIGHTNESS_ADDRESS; + * 2. write OT_EC_BL_CONTROL_ON_DATA into OT_EC_BL_CONTROL_ADDRESS. + * + * To read the LCD back light, just read out the value from + * OT_EC_BL_BRIGHTNESS_ADDRESS. + * + * LCD backlight brightness range: 0 - 100 (OT_EC_BL_BRIGHTNESS_MAX) + */ +#define OT_EC_BL_BRIGHTNESS_ADDRESS 0x44 +#define OT_EC_BL_BRIGHTNESS_MAX 100 +#define OT_EC_BL_CONTROL_ADDRESS 0x3A +#define OT_EC_BL_CONTROL_ON_DATA 0x1A + + +static int force; +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Force driver load, ignore DMI data"); + +static struct platform_device *oaktrail_device; +static struct backlight_device *oaktrail_bl_device; +static struct rfkill *bt_rfkill; +static struct rfkill *gps_rfkill; +static struct rfkill *wifi_rfkill; +static struct rfkill *wwan_rfkill; + + +/* rfkill */ +static int oaktrail_rfkill_set(void *data, bool blocked) +{ + u8 value; + u8 result; + unsigned long radio = (unsigned long) data; + + ec_read(OT_EC_DEVICE_STATE_ADDRESS, &result); + + if (!blocked) + value = (u8) (result | radio); + else + value = (u8) (result & ~radio); + + ec_write(OT_EC_DEVICE_STATE_ADDRESS, value); + + return 0; +} + +static const struct rfkill_ops oaktrail_rfkill_ops = { + .set_block = oaktrail_rfkill_set, +}; + +static struct rfkill *oaktrail_rfkill_new(char *name, enum rfkill_type type, + unsigned long mask) +{ + struct rfkill *rfkill_dev; + u8 value; + int err; + + rfkill_dev = rfkill_alloc(name, &oaktrail_device->dev, type, + &oaktrail_rfkill_ops, (void *)mask); + if (!rfkill_dev) + return ERR_PTR(-ENOMEM); + + ec_read(OT_EC_DEVICE_STATE_ADDRESS, &value); + rfkill_init_sw_state(rfkill_dev, (value & mask) != 1); + + err = rfkill_register(rfkill_dev); + if (err) { + rfkill_destroy(rfkill_dev); + return ERR_PTR(err); + } + + return rfkill_dev; +} + +static inline void __oaktrail_rfkill_cleanup(struct rfkill *rf) +{ + if (rf) { + rfkill_unregister(rf); + rfkill_destroy(rf); + } +} + +static void oaktrail_rfkill_cleanup(void) +{ + __oaktrail_rfkill_cleanup(wifi_rfkill); + __oaktrail_rfkill_cleanup(bt_rfkill); + __oaktrail_rfkill_cleanup(gps_rfkill); + __oaktrail_rfkill_cleanup(wwan_rfkill); +} + +static int oaktrail_rfkill_init(void) +{ + int ret; + + wifi_rfkill = oaktrail_rfkill_new("oaktrail-wifi", + RFKILL_TYPE_WLAN, + OT_EC_WIFI_MASK); + if (IS_ERR(wifi_rfkill)) { + ret = PTR_ERR(wifi_rfkill); + wifi_rfkill = NULL; + goto cleanup; + } + + bt_rfkill = oaktrail_rfkill_new("oaktrail-bluetooth", + RFKILL_TYPE_BLUETOOTH, + OT_EC_BT_MASK); + if (IS_ERR(bt_rfkill)) { + ret = PTR_ERR(bt_rfkill); + bt_rfkill = NULL; + goto cleanup; + } + + gps_rfkill = oaktrail_rfkill_new("oaktrail-gps", + RFKILL_TYPE_GPS, + OT_EC_GPS_MASK); + if (IS_ERR(gps_rfkill)) { + ret = PTR_ERR(gps_rfkill); + gps_rfkill = NULL; + goto cleanup; + } + + wwan_rfkill = oaktrail_rfkill_new("oaktrail-wwan", + RFKILL_TYPE_WWAN, + OT_EC_WWAN_MASK); + if (IS_ERR(wwan_rfkill)) { + ret = PTR_ERR(wwan_rfkill); + wwan_rfkill = NULL; + goto cleanup; + } + + return 0; + +cleanup: + oaktrail_rfkill_cleanup(); + return ret; +} + + +/* backlight */ +static int get_backlight_brightness(struct backlight_device *b) +{ + u8 value; + ec_read(OT_EC_BL_BRIGHTNESS_ADDRESS, &value); + + return value; +} + +static int set_backlight_brightness(struct backlight_device *b) +{ + u8 percent = (u8) b->props.brightness; + if (percent < 0 || percent > OT_EC_BL_BRIGHTNESS_MAX) + return -EINVAL; + + ec_write(OT_EC_BL_BRIGHTNESS_ADDRESS, percent); + ec_write(OT_EC_BL_CONTROL_ADDRESS, OT_EC_BL_CONTROL_ON_DATA); + + return 0; +} + +static const struct backlight_ops oaktrail_bl_ops = { + .get_brightness = get_backlight_brightness, + .update_status = set_backlight_brightness, +}; + +static int oaktrail_backlight_init(void) +{ + struct backlight_device *bd; + struct backlight_properties props; + + memset(&props, 0, sizeof(struct backlight_properties)); + props.max_brightness = OT_EC_BL_BRIGHTNESS_MAX; + bd = backlight_device_register(DRIVER_NAME, + &oaktrail_device->dev, NULL, + &oaktrail_bl_ops, + &props); + + if (IS_ERR(bd)) { + oaktrail_bl_device = NULL; + pr_warning("Unable to register backlight device\n"); + return PTR_ERR(bd); + } + + oaktrail_bl_device = bd; + + bd->props.brightness = get_backlight_brightness(bd); + bd->props.power = FB_BLANK_UNBLANK; + backlight_update_status(bd); + + return 0; +} + +static void oaktrail_backlight_exit(void) +{ + if (oaktrail_bl_device) + backlight_device_unregister(oaktrail_bl_device); +} + +static int __devinit oaktrail_probe(struct platform_device *pdev) +{ + return 0; +} + +static int __devexit oaktrail_remove(struct platform_device *pdev) +{ + return 0; +} + +static struct platform_driver oaktrail_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .probe = oaktrail_probe, + .remove = __devexit_p(oaktrail_remove) +}; + +static int dmi_check_cb(const struct dmi_system_id *id) +{ + pr_info("Identified model '%s'\n", id->ident); + return 0; +} + +static struct dmi_system_id __initdata oaktrail_dmi_table[] = { + { + .ident = "OakTrail platform", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "OakTrail platform"), + }, + .callback = dmi_check_cb + }, + { } +}; + +static int __init oaktrail_init(void) +{ + int ret; + + if (acpi_disabled) { + pr_err("ACPI needs to be enabled for this driver to work!\n"); + return -ENODEV; + } + + if (!force && !dmi_check_system(oaktrail_dmi_table)) { + pr_err("Platform not recognized (You could try the module's force-parameter)"); + return -ENODEV; + } + + ret = platform_driver_register(&oaktrail_driver); + if (ret) { + pr_warning("Unable to register platform driver\n"); + goto err_driver_reg; + } + + oaktrail_device = platform_device_alloc(DRIVER_NAME, -1); + if (!oaktrail_device) { + pr_warning("Unable to allocate platform device\n"); + ret = -ENOMEM; + goto err_device_alloc; + } + + ret = platform_device_add(oaktrail_device); + if (ret) { + pr_warning("Unable to add platform device\n"); + goto err_device_add; + } + + if (!acpi_video_backlight_support()) { + ret = oaktrail_backlight_init(); + if (ret) + goto err_backlight; + + } else + pr_info("Backlight controlled by ACPI video driver\n"); + + ret = oaktrail_rfkill_init(); + if (ret) { + pr_warning("Setup rfkill failed\n"); + goto err_rfkill; + } + + pr_info("Driver "DRIVER_VERSION" successfully loaded\n"); + return 0; + +err_rfkill: + oaktrail_backlight_exit(); +err_backlight: + platform_device_del(oaktrail_device); +err_device_add: + platform_device_put(oaktrail_device); +err_device_alloc: + platform_driver_unregister(&oaktrail_driver); +err_driver_reg: + + return ret; +} + +static void __exit oaktrail_cleanup(void) +{ + oaktrail_backlight_exit(); + oaktrail_rfkill_cleanup(); + platform_device_unregister(oaktrail_device); + platform_driver_unregister(&oaktrail_driver); + + pr_info("Driver unloaded\n"); +} + +module_init(oaktrail_init); +module_exit(oaktrail_cleanup); + +MODULE_AUTHOR("Yin Kangkai (kangkai.yin@intel.com)"); +MODULE_DESCRIPTION("Intel Oaktrail Platform ACPI Extras"); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("dmi:*:svnIntelCorporation:pnOakTrailplatform:*"); -- cgit v1.2.3 From c2647b5e99c8ff1b3f535c7c84564cdc53214edf Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Fri, 15 Apr 2011 18:42:47 +0800 Subject: acer-wmi: does not allow negative number set to initial device state The driver set module parameter value: mailled, threeg and brightness to BIOS by evaluate wmi method when driver was initialed. The default values for those parameters are -1, so, that will be better don't set negative value to BIOS. Cc: Carlos Corbacho Cc: Matthew Garrett Cc: Dmitry Torokhov Cc: Corentin Chary Signed-off-by: Lee, Chun-Yi Signed-off-by: Matthew Garrett --- drivers/platform/x86/acer-wmi.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index fa8fa73f543e..0682ecb30746 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -961,10 +961,12 @@ static void __init acer_commandline_init(void) * These will all fail silently if the value given is invalid, or the * capability isn't available on the given interface */ - set_u32(mailled, ACER_CAP_MAILLED); - if (!has_type_aa) + if (mailled >= 0) + set_u32(mailled, ACER_CAP_MAILLED); + if (!has_type_aa && threeg >= 0) set_u32(threeg, ACER_CAP_THREEG); - set_u32(brightness, ACER_CAP_BRIGHTNESS); + if (brightness >= 0) + set_u32(brightness, ACER_CAP_BRIGHTNESS); } /* -- cgit v1.2.3 From 95c7021540661a1d19130296be3e799d5a9135f8 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Mon, 2 May 2011 09:57:08 +0100 Subject: tc1100-wmi: Orphan driver I've never owned the hardware, this was a port of an existing driver to prove that the ACPI-WMI code was useful to more than just acer-wmi. Signed-off-by: Carlos Corbacho Signed-off-by: Matthew Garrett --- MAINTAINERS | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index c4fc1daddcb6..bcb07cb927b4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3024,9 +3024,8 @@ S: Maintained F: drivers/net/wireless/hostap/ HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER -M: Carlos Corbacho L: platform-driver-x86@vger.kernel.org -S: Odd Fixes +S: Orphan F: drivers/platform/x86/tc1100-wmi.c HP100: Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series -- cgit v1.2.3 From 5b9272594b5144538b96ca7eb82898c49519ec16 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Mon, 2 May 2011 09:57:13 +0100 Subject: wmi: Orphan ACPI-WMI driver I no longer have the time to work on this, and haven't really been doing any work to this either. Time to let someone else take the reins. Signed-off-by: Carlos Corbacho Signed-off-by: Matthew Garrett --- MAINTAINERS | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index bcb07cb927b4..390a4130a614 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -271,10 +271,8 @@ S: Supported F: drivers/acpi/video.c ACPI WMI DRIVER -M: Carlos Corbacho L: platform-driver-x86@vger.kernel.org -W: http://www.lesswatts.org/projects/acpi/ -S: Maintained +S: Orphan F: drivers/platform/x86/wmi.c AD1889 ALSA SOUND DRIVER -- cgit v1.2.3 From d9269a7146e33147866ecbf1ae485f6d1a1379f1 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Mon, 2 May 2011 09:57:18 +0100 Subject: acer-wmi: Update MAINTAINERS I don't have the time or much interest these days in maintaining acer-wmi, as I don't have access to newer Acer hardware. As he's been doing most of the work these days anyway, Joey Lee has kindly agreed to take over. Signed-off-by: Carlos Corbacho Cc: Joey Lee Signed-off-by: Matthew Garrett --- MAINTAINERS | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 390a4130a614..bad19e9d9dcb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -223,10 +223,8 @@ S: Maintained F: drivers/platform/x86/acerhdf.c ACER WMI LAPTOP EXTRAS -M: Carlos Corbacho -L: aceracpi@googlegroups.com (subscribers-only) +M: Joey Lee L: platform-driver-x86@vger.kernel.org -W: http://code.google.com/p/aceracpi S: Maintained F: drivers/platform/x86/acer-wmi.c -- cgit v1.2.3 From e569b223d53cb2720f55be72932f5758a056ff6d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 24 Apr 2011 11:00:08 +0200 Subject: acerhdf: Drop pointless dependency on THERMAL_HWMON The THERMAL_HWMON config option simply exposes the thermal zone temperature values and limits to user-space. It makes no sense for a kernel driver to depend on this. Signed-off-by: Jean Delvare Cc: Peter Feuerer Cc: Matthew Garrett Signed-off-by: Matthew Garrett --- drivers/platform/x86/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 83c2411acb5b..45e0191c35dd 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -39,7 +39,7 @@ config ACER_WMI config ACERHDF tristate "Acer Aspire One temperature and fan driver" - depends on THERMAL && THERMAL_HWMON && ACPI + depends on THERMAL && ACPI ---help--- This is a driver for Acer Aspire One netbooks. It allows to access the temperature sensor and to control the fan. -- cgit v1.2.3 From c4bae98c4f913d3220d185c47d8817b5e2bba007 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 24 Apr 2011 18:07:55 +0200 Subject: acerhdf: Clean up includes * The acerhdf driver isn't an ACPI driver, so it needs not include . All it uses is ec_read() and ec_write(), for which is sufficient. * I couldn't find any reason why and were included. This should avoid unneeded rebuilds of the acerhdf driver. Signed-off-by: Jean Delvare Cc: Peter Feuerer Cc: Matthew Garrett Signed-off-by: Matthew Garrett --- drivers/platform/x86/acerhdf.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 60f9cfcac93f..fca3489218b7 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -35,10 +35,8 @@ #include #include -#include #include -#include -#include +#include #include #include -- cgit v1.2.3 From 020036678e810be10a352339faa9a1df2bd8f5a3 Mon Sep 17 00:00:00 2001 From: Carlos Corbacho Date: Mon, 2 May 2011 09:57:23 +0100 Subject: acer-wmi: Delete out-of-date documentation The documentation file for acer-wmi is long out of date, and there's not much point in keeping it around either. Signed-off-by: Carlos Corbacho Signed-off-by: Matthew Garrett --- Documentation/laptops/acer-wmi.txt | 184 ------------------------------------- 1 file changed, 184 deletions(-) delete mode 100644 Documentation/laptops/acer-wmi.txt diff --git a/Documentation/laptops/acer-wmi.txt b/Documentation/laptops/acer-wmi.txt deleted file mode 100644 index 4beafa663dd6..000000000000 --- a/Documentation/laptops/acer-wmi.txt +++ /dev/null @@ -1,184 +0,0 @@ -Acer Laptop WMI Extras Driver -http://code.google.com/p/aceracpi -Version 0.3 -4th April 2009 - -Copyright 2007-2009 Carlos Corbacho - -acer-wmi is a driver to allow you to control various parts of your Acer laptop -hardware under Linux which are exposed via ACPI-WMI. - -This driver completely replaces the old out-of-tree acer_acpi, which I am -currently maintaining for bug fixes only on pre-2.6.25 kernels. All development -work is now focused solely on acer-wmi. - -Disclaimer -********** - -Acer and Wistron have provided nothing towards the development acer_acpi or -acer-wmi. All information we have has been through the efforts of the developers -and the users to discover as much as possible about the hardware. - -As such, I do warn that this could break your hardware - this is extremely -unlikely of course, but please bear this in mind. - -Background -********** - -acer-wmi is derived from acer_acpi, originally developed by Mark -Smith in 2005, then taken over by Carlos Corbacho in 2007, in order to activate -the wireless LAN card under a 64-bit version of Linux, as acerhk[1] (the -previous solution to the problem) relied on making 32 bit BIOS calls which are -not possible in kernel space from a 64 bit OS. - -[1] acerhk: http://www.cakey.de/acerhk/ - -Supported Hardware -****************** - -NOTE: The Acer Aspire One is not supported hardware. It cannot work with -acer-wmi until Acer fix their ACPI-WMI implementation on them, so has been -blacklisted until that happens. - -Please see the website for the current list of known working hardware: - -http://code.google.com/p/aceracpi/wiki/SupportedHardware - -If your laptop is not listed, or listed as unknown, and works with acer-wmi, -please contact me with a copy of the DSDT. - -If your Acer laptop doesn't work with acer-wmi, I would also like to see the -DSDT. - -To send me the DSDT, as root/sudo: - -cat /sys/firmware/acpi/tables/DSDT > dsdt - -And send me the resulting 'dsdt' file. - -Usage -***** - -On Acer laptops, acer-wmi should already be autoloaded based on DMI matching. -For non-Acer laptops, until WMI based autoloading support is added, you will -need to manually load acer-wmi. - -acer-wmi creates /sys/devices/platform/acer-wmi, and fills it with various -files whose usage is detailed below, which enables you to control some of the -following (varies between models): - -* the wireless LAN card radio -* inbuilt Bluetooth adapter -* inbuilt 3G card -* mail LED of your laptop -* brightness of the LCD panel - -Wireless -******** - -With regards to wireless, all acer-wmi does is enable the radio on the card. It -is not responsible for the wireless LED - once the radio is enabled, this is -down to the wireless driver for your card. So the behaviour of the wireless LED, -once you enable the radio, will depend on your hardware and driver combination. - -e.g. With the BCM4318 on the Acer Aspire 5020 series: - -ndiswrapper: Light blinks on when transmitting -b43: Solid light, blinks off when transmitting - -Wireless radio control is unconditionally enabled - all Acer laptops that support -acer-wmi come with built-in wireless. However, should you feel so inclined to -ever wish to remove the card, or swap it out at some point, please get in touch -with me, as we may well be able to gain some data on wireless card detection. - -The wireless radio is exposed through rfkill. - -Bluetooth -********* - -For bluetooth, this is an internal USB dongle, so once enabled, you will get -a USB device connection event, and a new USB device appears. When you disable -bluetooth, you get the reverse - a USB device disconnect event, followed by the -device disappearing again. - -Bluetooth is autodetected by acer-wmi, so if you do not have a bluetooth module -installed in your laptop, this file won't exist (please be aware that it is -quite common for Acer not to fit bluetooth to their laptops - so just because -you have a bluetooth button on the laptop, doesn't mean that bluetooth is -installed). - -For the adventurously minded - if you want to buy an internal bluetooth -module off the internet that is compatible with your laptop and fit it, then -it will work just fine with acer-wmi. - -Bluetooth is exposed through rfkill. - -3G -** - -3G is currently not autodetected, so the 'threeg' file is always created under -sysfs. So far, no-one in possession of an Acer laptop with 3G built-in appears to -have tried Linux, or reported back, so we don't have any information on this. - -If you have an Acer laptop that does have a 3G card in, please contact me so we -can properly detect these, and find out a bit more about them. - -To read the status of the 3G card (0=off, 1=on): -cat /sys/devices/platform/acer-wmi/threeg - -To enable the 3G card: -echo 1 > /sys/devices/platform/acer-wmi/threeg - -To disable the 3G card: -echo 0 > /sys/devices/platform/acer-wmi/threeg - -To set the state of the 3G card when loading acer-wmi, pass: -threeg=X (where X is 0 or 1) - -Mail LED -******** - -This can be found in most older Acer laptops supported by acer-wmi, and many -newer ones - it is built into the 'mail' button, and blinks when active. - -On newer (WMID) laptops though, we have no way of detecting the mail LED. If -your laptop identifies itself in dmesg as a WMID model, then please try loading -acer_acpi with: - -force_series=2490 - -This will use a known alternative method of reading/ writing the mail LED. If -it works, please report back to me with the DMI data from your laptop so this -can be added to acer-wmi. - -The LED is exposed through the LED subsystem, and can be found in: - -/sys/devices/platform/acer-wmi/leds/acer-wmi::mail/ - -The mail LED is autodetected, so if you don't have one, the LED device won't -be registered. - -Backlight -********* - -The backlight brightness control is available on all acer-wmi supported -hardware. The maximum brightness level is usually 15, but on some newer laptops -it's 10 (this is again autodetected). - -The backlight is exposed through the backlight subsystem, and can be found in: - -/sys/devices/platform/acer-wmi/backlight/acer-wmi/ - -Credits -******* - -Olaf Tauber, who did the real hard work when he developed acerhk -http://www.cakey.de/acerhk/ -All the authors of laptop ACPI modules in the kernel, whose work -was an inspiration in the early days of acer_acpi -Mathieu Segaud, who solved the problem with having to modprobe the driver -twice in acer_acpi 0.2. -Jim Ramsay, who added support for the WMID interface -Mark Smith, who started the original acer_acpi - -And the many people who have used both acer_acpi and acer-wmi. -- cgit v1.2.3 From b9e066942981c6de3897de94953bea295ae18ec8 Mon Sep 17 00:00:00 2001 From: Ameya Palande <2ameya@gmail.com> Date: Wed, 6 Apr 2011 17:44:37 +0300 Subject: platform/x86: Simplify intel_mid_powerbtn This patch: 1. Removes unnecessay #defines 2. Removes 'mfld_pb_priv' data structure which results in simpler error handling and less memory allocations. Signed-off-by: Ameya Palande <2ameya@gmail.com> Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_mid_powerbtn.c | 72 +++++++++++++------------------ 1 file changed, 30 insertions(+), 42 deletions(-) diff --git a/drivers/platform/x86/intel_mid_powerbtn.c b/drivers/platform/x86/intel_mid_powerbtn.c index 213e79ba68d5..f1ae5078b7ec 100644 --- a/drivers/platform/x86/intel_mid_powerbtn.c +++ b/drivers/platform/x86/intel_mid_powerbtn.c @@ -23,58 +23,48 @@ #include #include #include + #include #define DRIVER_NAME "msic_power_btn" -#define MSIC_IRQ_STAT 0x02 - #define MSIC_IRQ_PB (1 << 0) -#define MSIC_PB_CONFIG 0x3e #define MSIC_PB_STATUS 0x3f - #define MSIC_PB_LEVEL (1 << 3) /* 1 - release, 0 - press */ - -struct mfld_pb_priv { - struct input_dev *input; - unsigned int irq; -}; +#define MSIC_PB_LEVEL (1 << 3) /* 1 - release, 0 - press */ static irqreturn_t mfld_pb_isr(int irq, void *dev_id) { - struct mfld_pb_priv *priv = dev_id; + struct input_dev *input = dev_id; int ret; u8 pbstat; ret = intel_scu_ipc_ioread8(MSIC_PB_STATUS, &pbstat); - if (ret < 0) - return IRQ_HANDLED; - - input_event(priv->input, EV_KEY, KEY_POWER, !(pbstat & MSIC_PB_LEVEL)); - input_sync(priv->input); + if (ret < 0) { + dev_err(input->dev.parent, "Read error %d while reading" + " MSIC_PB_STATUS\n", ret); + } else { + input_event(input, EV_KEY, KEY_POWER, + !(pbstat & MSIC_PB_LEVEL)); + input_sync(input); + } return IRQ_HANDLED; } static int __devinit mfld_pb_probe(struct platform_device *pdev) { - struct mfld_pb_priv *priv; struct input_dev *input; - int irq; + int irq = platform_get_irq(pdev, 0); int error; - irq = platform_get_irq(pdev, 0); if (irq < 0) return -EINVAL; - priv = kzalloc(sizeof(struct mfld_pb_priv), GFP_KERNEL); input = input_allocate_device(); - if (!priv || !input) { - error = -ENOMEM; - goto err_free_mem; + if (!input) { + dev_err(&pdev->dev, "Input device allocation error\n"); + return -ENOMEM; } - priv->input = input; - priv->irq = irq; - input->name = pdev->name; input->phys = "power-button/input0"; input->id.bustype = BUS_HOST; @@ -82,42 +72,40 @@ static int __devinit mfld_pb_probe(struct platform_device *pdev) input_set_capability(input, EV_KEY, KEY_POWER); - error = request_threaded_irq(priv->irq, NULL, mfld_pb_isr, - 0, DRIVER_NAME, priv); + error = request_threaded_irq(irq, NULL, mfld_pb_isr, 0, + DRIVER_NAME, input); if (error) { - dev_err(&pdev->dev, - "unable to request irq %d for mfld power button\n", - irq); - goto err_free_mem; + dev_err(&pdev->dev, "Unable to request irq %d for mfld power" + "button\n", irq); + goto err_free_input; } error = input_register_device(input); if (error) { - dev_err(&pdev->dev, - "unable to register input dev, error %d\n", error); + dev_err(&pdev->dev, "Unable to register input dev, error " + "%d\n", error); goto err_free_irq; } - platform_set_drvdata(pdev, priv); + platform_set_drvdata(pdev, input); return 0; err_free_irq: - free_irq(priv->irq, priv); -err_free_mem: + free_irq(irq, input); +err_free_input: input_free_device(input); - kfree(priv); return error; } static int __devexit mfld_pb_remove(struct platform_device *pdev) { - struct mfld_pb_priv *priv = platform_get_drvdata(pdev); - - free_irq(priv->irq, priv); - input_unregister_device(priv->input); - kfree(priv); + struct input_dev *input = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + free_irq(irq, input); + input_unregister_device(input); platform_set_drvdata(pdev, NULL); + return 0; } -- cgit v1.2.3 From cb8b646d8b27053d311595b4fc7dbe161d92683e Mon Sep 17 00:00:00 2001 From: Ameya Palande <2ameya@gmail.com> Date: Wed, 6 Apr 2011 17:45:03 +0300 Subject: platform/x86: Fix Makefile for intel_mid_powerbtn Signed-off-by: Ameya Palande <2ameya@gmail.com> Signed-off-by: Matthew Garrett --- drivers/platform/x86/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index af683fb5a807..afc1f832aa67 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -41,6 +41,6 @@ obj-$(CONFIG_XO1_RFKILL) += xo1-rfkill.o obj-$(CONFIG_XO15_EBOOK) += xo15-ebook.o obj-$(CONFIG_IBM_RTL) += ibm_rtl.o obj-$(CONFIG_SAMSUNG_LAPTOP) += samsung-laptop.o -obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o obj-$(CONFIG_MXM_WMI) += mxm-wmi.o +obj-$(CONFIG_INTEL_MID_POWER_BUTTON) += intel_mid_powerbtn.o obj-$(CONFIG_INTEL_OAKTRAIL) += intel_oaktrail.o -- cgit v1.2.3 From 239dca9e9aff6630c22fef696978ba3a878f7d96 Mon Sep 17 00:00:00 2001 From: Ameya Palande <2ameya@gmail.com> Date: Thu, 7 Apr 2011 16:30:02 +0300 Subject: platform-x86: intel_mid_thermal: Fix memory leak Signed-off-by: Ameya Palande <2ameya@gmail.com> Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_mid_thermal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c index f0776504521f..3a578323122b 100644 --- a/drivers/platform/x86/intel_mid_thermal.c +++ b/drivers/platform/x86/intel_mid_thermal.c @@ -527,6 +527,7 @@ static int mid_thermal_remove(struct platform_device *pdev) for (i = 0; i < MSIC_THERMAL_SENSORS; i++) thermal_zone_device_unregister(pinfo->tzd[i]); + kfree(pinfo); platform_set_drvdata(pdev, NULL); /* Stop the ADC */ -- cgit v1.2.3 From 8ae68de15d5ddaa8d41e197a730e19223adab2e1 Mon Sep 17 00:00:00 2001 From: Melchior FRANZ Date: Tue, 24 May 2011 10:35:55 +0200 Subject: support wlan hotkey on Acer Travelmate 5735Z On an Acer Travelmate 5735Z-452G32Mnss the WLAN-enable/disable key doesn't send 0x1 as acpi event key code, but 0x3. This patch also makes the module ignore hotkey acpi events for functions that are already handled without. This avoids warning message "keyboard: can't emulate rawmode for keycode 240". Signed-off-by: Melchior FRANZ Signed-off-by: Matthew Garrett --- drivers/platform/x86/acer-wmi.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 0682ecb30746..57c6c8a4db24 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -98,13 +98,26 @@ enum acer_wmi_event_ids { static const struct key_entry acer_wmi_keymap[] = { {KE_KEY, 0x01, {KEY_WLAN} }, /* WiFi */ + {KE_KEY, 0x03, {KEY_WLAN} }, /* WiFi */ {KE_KEY, 0x12, {KEY_BLUETOOTH} }, /* BT */ {KE_KEY, 0x21, {KEY_PROG1} }, /* Backup */ {KE_KEY, 0x22, {KEY_PROG2} }, /* Arcade */ {KE_KEY, 0x23, {KEY_PROG3} }, /* P_Key */ {KE_KEY, 0x24, {KEY_PROG4} }, /* Social networking_Key */ + {KE_IGNORE, 0x41, {KEY_MUTE} }, + {KE_IGNORE, 0x42, {KEY_PREVIOUSSONG} }, + {KE_IGNORE, 0x43, {KEY_NEXTSONG} }, + {KE_IGNORE, 0x44, {KEY_PLAYPAUSE} }, + {KE_IGNORE, 0x45, {KEY_STOP} }, + {KE_IGNORE, 0x48, {KEY_VOLUMEUP} }, + {KE_IGNORE, 0x49, {KEY_VOLUMEDOWN} }, + {KE_IGNORE, 0x61, {KEY_SWITCHVIDEOMODE} }, + {KE_IGNORE, 0x62, {KEY_BRIGHTNESSUP} }, + {KE_IGNORE, 0x63, {KEY_BRIGHTNESSDOWN} }, {KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} }, /* Display Switch */ + {KE_IGNORE, 0x81, {KEY_SLEEP} }, {KE_KEY, 0x82, {KEY_TOUCHPAD_TOGGLE} }, /* Touch Pad On/Off */ + {KE_IGNORE, 0x83, {KEY_TOUCHPAD_TOGGLE} }, {KE_END, 0} }; @@ -1345,7 +1358,7 @@ static void acer_wmi_notify(u32 value, void *context) case WMID_HOTKEY_EVENT: if (return_value.device_state) { u16 device_state = return_value.device_state; - pr_debug("deivces states: 0x%x\n", device_state); + pr_debug("device state: 0x%x\n", device_state); if (has_cap(ACER_CAP_WIRELESS)) rfkill_set_sw_state(wireless_rfkill, !(device_state & ACER_WMID3_GDS_WIRELESS)); -- cgit v1.2.3 From 5ddf9c5fa5a78036790ed72aaed3b84ee7dd4532 Mon Sep 17 00:00:00 2001 From: Weiping Pan Date: Mon, 16 May 2011 14:49:47 +0800 Subject: platform/x86:delete two unused variables variable handle is not used in these two functions, just delete them. Signed-off-by: Weiping Pan Signed-off-by: Matthew Garrett --- drivers/platform/x86/sony-laptop.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index 12dd0a62f305..bbd182e178cb 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -962,7 +962,6 @@ static int sony_backlight_get_brightness(struct backlight_device *bd) static int sony_nc_get_brightness_ng(struct backlight_device *bd) { int result; - int *handle = (int *)bl_get_data(bd); struct sony_backlight_props *sdev = (struct sony_backlight_props *)bl_get_data(bd); @@ -974,7 +973,6 @@ static int sony_nc_get_brightness_ng(struct backlight_device *bd) static int sony_nc_update_status_ng(struct backlight_device *bd) { int value, result; - int *handle = (int *)bl_get_data(bd); struct sony_backlight_props *sdev = (struct sony_backlight_props *)bl_get_data(bd); -- cgit v1.2.3 From a8d1a266eee5f8b822449fe19d1735189377ef47 Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Sun, 22 May 2011 07:33:52 +0800 Subject: acer-wmi: check the existence of internal 3G device when set capability That will be better to check the existence of internal 3G device when we set threeg capability and generate killswitch for threeg. It can avoid userland access 3G rfkill but the machine doesn't have internal 3G device. Reference: bko#32862 https://bugzilla.kernel.org/show_bug.cgi?id=32862 Tested on Acer Aspire 8930G, Acer Travelmate 8572 Tested-by: Hector Martin Cc: Carlos Corbacho Cc: Matthew Garrett Cc: Dmitry Torokhov Cc: Corentin Chary Cc: Thomas Renninger Signed-off-by: Lee, Chun-Yi Signed-off-by: Matthew Garrett --- drivers/platform/x86/acer-wmi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 57c6c8a4db24..92ee4d637270 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -889,7 +889,8 @@ static acpi_status WMID_set_capabilities(void) dmi_walk(type_aa_dmi_decode, NULL); if (!has_type_aa) { interface->capability |= ACER_CAP_WIRELESS; - interface->capability |= ACER_CAP_THREEG; + if (devices & 0x40) + interface->capability |= ACER_CAP_THREEG; if (devices & 0x10) interface->capability |= ACER_CAP_BLUETOOTH; } -- cgit v1.2.3 From ab6a931620cfa5c565b351d1982306c3c8b97f96 Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Sun, 22 May 2011 07:33:53 +0800 Subject: acer-wmi: allow 64-bits return buffer from WMI methods Acer WMID_GUID1/2 method's return buffer was declared to 64-bits on some Acer notebook, but WMI method only use 32-bits in return buffer. So, add this patch for allow 64-bits return buffer. Reference: bko#34142 https://bugzilla.kernel.org/show_bug.cgi?id=34142 Tested on Acer Travelmate 5735Z-452G32Mnss Tested-by: Melchior FRANZ Cc: Carlos Corbacho Cc: Matthew Garrett Cc: Dmitry Torokhov Cc: Corentin Chary Cc: Thomas Renninger Signed-off-by: Lee, Chun-Yi Signed-off-by: Matthew Garrett --- drivers/platform/x86/acer-wmi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 92ee4d637270..48219117823b 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -750,7 +750,8 @@ WMI_execute_u32(u32 method_id, u32 in, u32 *out) obj = (union acpi_object *) result.pointer; if (obj && obj->type == ACPI_TYPE_BUFFER && - obj->buffer.length == sizeof(u32)) { + (obj->buffer.length == sizeof(u32) || + obj->buffer.length == sizeof(u64))) { tmp = *((u32 *) obj->buffer.pointer); } else { tmp = 0; @@ -879,7 +880,8 @@ static acpi_status WMID_set_capabilities(void) obj = (union acpi_object *) out.pointer; if (obj && obj->type == ACPI_TYPE_BUFFER && - obj->buffer.length == sizeof(u32)) { + (obj->buffer.length == sizeof(u32) || + obj->buffer.length == sizeof(u64))) { devices = *((u32 *) obj->buffer.pointer); } else { kfree(out.pointer); @@ -1522,7 +1524,8 @@ static u32 get_wmid_devices(void) obj = (union acpi_object *) out.pointer; if (obj && obj->type == ACPI_TYPE_BUFFER && - obj->buffer.length == sizeof(u32)) { + (obj->buffer.length == sizeof(u32) || + obj->buffer.length == sizeof(u64))) { devices = *((u32 *) obj->buffer.pointer); } -- cgit v1.2.3 From 6d88ff0f8ef3529f68233d3963b2a7e07f8e4f69 Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Sun, 22 May 2011 07:33:54 +0800 Subject: acer-wmi: support to set communication device state by new wmid method Have many Acer notebooks' BIOS already support new WMID_GUID3 method. On those machines, that will be better set communication device by evaluate WMID_GUID3 method. Tested on Acer Travelmate 8572 Cc: Carlos Corbacho Cc: Matthew Garrett Cc: Dmitry Torokhov Cc: Corentin Chary Cc: Thomas Renninger Signed-off-by: Lee, Chun-Yi Signed-off-by: Matthew Garrett --- drivers/platform/x86/acer-wmi.c | 111 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 110 insertions(+), 1 deletion(-) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 48219117823b..5dc843bfc6c2 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -135,6 +135,7 @@ struct event_return_value { */ #define ACER_WMID3_GDS_WIRELESS (1<<0) /* WiFi */ #define ACER_WMID3_GDS_THREEG (1<<6) /* 3G */ +#define ACER_WMID3_GDS_WIMAX (1<<7) /* WiMAX */ #define ACER_WMID3_GDS_BLUETOOTH (1<<11) /* BT */ struct lm_input_params { @@ -1142,6 +1143,114 @@ static acpi_status get_device_status(u32 *value, u32 cap) } } +static acpi_status wmid3_set_device_status(u32 value, u16 device) +{ + struct wmid3_gds_return_value return_value; + acpi_status status; + union acpi_object *obj; + u16 devices; + struct wmid3_gds_input_param params = { + .function_num = 0x1, + .hotkey_number = 0x01, + .devices = ACER_WMID3_GDS_WIRELESS & + ACER_WMID3_GDS_THREEG & + ACER_WMID3_GDS_WIMAX & + ACER_WMID3_GDS_BLUETOOTH, + }; + struct acpi_buffer input = { + sizeof(struct wmid3_gds_input_param), + ¶ms + }; + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer output2 = { ACPI_ALLOCATE_BUFFER, NULL }; + + status = wmi_evaluate_method(WMID_GUID3, 0, 0x2, &input, &output); + if (ACPI_FAILURE(status)) + return status; + + obj = output.pointer; + + if (!obj) + return AE_ERROR; + else if (obj->type != ACPI_TYPE_BUFFER) { + kfree(obj); + return AE_ERROR; + } + if (obj->buffer.length != 8) { + pr_warning("Unknown buffer length %d\n", obj->buffer.length); + kfree(obj); + return AE_ERROR; + } + + return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer); + kfree(obj); + + if (return_value.error_code || return_value.ec_return_value) { + pr_warning("Get Current Device Status failed: " + "0x%x - 0x%x\n", return_value.error_code, + return_value.ec_return_value); + return status; + } + + devices = return_value.devices; + params.function_num = 0x2; + params.hotkey_number = 0x01; + params.devices = (value) ? (devices | device) : (devices & ~device); + + status = wmi_evaluate_method(WMID_GUID3, 0, 0x1, &input, &output2); + if (ACPI_FAILURE(status)) + return status; + + obj = output2.pointer; + + if (!obj) + return AE_ERROR; + else if (obj->type != ACPI_TYPE_BUFFER) { + kfree(obj); + return AE_ERROR; + } + if (obj->buffer.length != 4) { + pr_warning("Unknown buffer length %d\n", obj->buffer.length); + kfree(obj); + return AE_ERROR; + } + + return_value = *((struct wmid3_gds_return_value *)obj->buffer.pointer); + kfree(obj); + + if (return_value.error_code || return_value.ec_return_value) + pr_warning("Set Device Status failed: " + "0x%x - 0x%x\n", return_value.error_code, + return_value.ec_return_value); + + return status; +} + +static acpi_status set_device_status(u32 value, u32 cap) +{ + if (wmi_has_guid(WMID_GUID3)) { + u16 device; + + switch (cap) { + case ACER_CAP_WIRELESS: + device = ACER_WMID3_GDS_WIRELESS; + break; + case ACER_CAP_BLUETOOTH: + device = ACER_WMID3_GDS_BLUETOOTH; + break; + case ACER_CAP_THREEG: + device = ACER_WMID3_GDS_THREEG; + break; + default: + return AE_ERROR; + } + return wmid3_set_device_status(value, device); + + } else { + return set_u32(value, cap); + } +} + /* * Rfkill devices */ @@ -1178,7 +1287,7 @@ static int acer_rfkill_set(void *data, bool blocked) u32 cap = (unsigned long)data; if (rfkill_inited) { - status = set_u32(!blocked, cap); + status = set_device_status(!blocked, cap); if (ACPI_FAILURE(status)) return -ENODEV; } -- cgit v1.2.3 From d436514e21b827ab602d1714028c34179c42d09f Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Thu, 26 May 2011 11:09:19 +0800 Subject: msi-laptop: fix section mismatch in reference from the function load_scm_model_init There have section mismatch warning message shows up when building the kernel with make CONFIG_DEBUG_SECTION_MISMATCH=y. The problem is the load_scm_model_init() calls msi_laptop_input_setup() which is an __init function, but load_scm_model_init() lacks a __init annotation. This patch add __init on load_scm_model_init() to avoid warning message. Cc: Matthew Garrett Cc: Dmitry Torokhov Cc: Corentin Chary Cc: Thomas Renninger Signed-off-by: Lee, Chun-Yi Signed-off-by: Matthew Garrett --- drivers/platform/x86/msi-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c index f89c0b6a9aec..d7213e406867 100644 --- a/drivers/platform/x86/msi-laptop.c +++ b/drivers/platform/x86/msi-laptop.c @@ -800,7 +800,7 @@ static void msi_laptop_input_destroy(void) input_unregister_device(msi_laptop_input_dev); } -static int load_scm_model_init(struct platform_device *sdev) +static int __init load_scm_model_init(struct platform_device *sdev) { u8 data; int result; -- cgit v1.2.3 From 987dfbaa65b2c3568b85e29d2598da08a011ee09 Mon Sep 17 00:00:00 2001 From: "Lee, Chun-Yi" Date: Fri, 27 May 2011 14:52:14 +0800 Subject: acer-wmi: support integer return type from WMI methods Acer WMID_GUID1/2 method's return value was declared to integer type on Gateway notebook. So, add this patch for support integer return type. Reference: bko#33032 https://bugzilla.kernel.org/show_bug.cgi?id=33032 Tested on Gateway NV5909H laptop Tested-by: Filipus Klutiero Cc: Carlos Corbacho Cc: Matthew Garrett Cc: Dmitry Torokhov Cc: Corentin Chary Cc: Thomas Renninger Signed-off-by: Lee, Chun-Yi Signed-off-by: Matthew Garrett --- drivers/platform/x86/acer-wmi.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 5dc843bfc6c2..005417bd429e 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -754,6 +754,8 @@ WMI_execute_u32(u32 method_id, u32 in, u32 *out) (obj->buffer.length == sizeof(u32) || obj->buffer.length == sizeof(u64))) { tmp = *((u32 *) obj->buffer.pointer); + } else if (obj->type == ACPI_TYPE_INTEGER) { + tmp = (u32) obj->integer.value; } else { tmp = 0; } @@ -884,6 +886,8 @@ static acpi_status WMID_set_capabilities(void) (obj->buffer.length == sizeof(u32) || obj->buffer.length == sizeof(u64))) { devices = *((u32 *) obj->buffer.pointer); + } else if (obj->type == ACPI_TYPE_INTEGER) { + devices = (u32) obj->integer.value; } else { kfree(out.pointer); return AE_ERROR; @@ -1636,6 +1640,8 @@ static u32 get_wmid_devices(void) (obj->buffer.length == sizeof(u32) || obj->buffer.length == sizeof(u64))) { devices = *((u32 *) obj->buffer.pointer); + } else if (obj->type == ACPI_TYPE_INTEGER) { + devices = (u32) obj->integer.value; } kfree(out.pointer); -- cgit v1.2.3 From 07850552b92b3637fa56767b5e460b4238014447 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 29 Apr 2011 16:26:27 -0500 Subject: eCryptfs: Clear i_nlink in rmdir eCryptfs wasn't clearing the eCryptfs inode's i_nlink after a successful vfs_rmdir() on the lower directory. This resulted in the inode evict and destroy paths to be missed. https://bugs.launchpad.net/ecryptfs/+bug/723518 Signed-off-by: Tyler Hicks Cc: --- fs/ecryptfs/inode.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 4d4cc6a90cd5..94ab3c06317a 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -527,6 +527,8 @@ static int ecryptfs_rmdir(struct inode *dir, struct dentry *dentry) dget(lower_dentry); rc = vfs_rmdir(lower_dir_dentry->d_inode, lower_dentry); dput(lower_dentry); + if (!rc && dentry->d_inode) + clear_nlink(dentry->d_inode); fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode); dir->i_nlink = lower_dir_dentry->d_inode->i_nlink; unlock_dir(lower_dir_dentry); -- cgit v1.2.3 From 8d08dab786ad5cc2aca2bf870de370144b78c85a Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 17 May 2011 00:50:33 -0500 Subject: eCryptfs: Allow 2 scatterlist entries for encrypted filenames The buffers allocated while encrypting and decrypting long filenames can sometimes straddle two pages. In this situation, virt_to_scatterlist() will return -ENOMEM, causing the operation to fail and the user will get scary error messages in their logs: kernel: ecryptfs_write_tag_70_packet: Internal error whilst attempting to convert filename memory to scatterlist; expected rc = 1; got rc = [-12]. block_aligned_filename_size = [272] kernel: ecryptfs_encrypt_filename: Error attempting to generate tag 70 packet; rc = [-12] kernel: ecryptfs_encrypt_and_encode_filename: Error attempting to encrypt filename; rc = [-12] kernel: ecryptfs_lookup: Error attempting to encrypt and encode filename; rc = [-12] The solution is to allow up to 2 scatterlist entries to be used. Signed-off-by: Tyler Hicks Cc: --- fs/ecryptfs/keystore.c | 46 +++++++++++++++++++++------------------------- 1 file changed, 21 insertions(+), 25 deletions(-) diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c index 03e609c45012..27a7fefb83eb 100644 --- a/fs/ecryptfs/keystore.c +++ b/fs/ecryptfs/keystore.c @@ -599,8 +599,8 @@ struct ecryptfs_write_tag_70_packet_silly_stack { struct mutex *tfm_mutex; char *block_aligned_filename; struct ecryptfs_auth_tok *auth_tok; - struct scatterlist src_sg; - struct scatterlist dst_sg; + struct scatterlist src_sg[2]; + struct scatterlist dst_sg[2]; struct blkcipher_desc desc; char iv[ECRYPTFS_MAX_IV_BYTES]; char hash[ECRYPTFS_TAG_70_DIGEST_SIZE]; @@ -816,23 +816,21 @@ ecryptfs_write_tag_70_packet(char *dest, size_t *remaining_bytes, memcpy(&s->block_aligned_filename[s->num_rand_bytes], filename, filename_size); rc = virt_to_scatterlist(s->block_aligned_filename, - s->block_aligned_filename_size, &s->src_sg, 1); - if (rc != 1) { + s->block_aligned_filename_size, s->src_sg, 2); + if (rc < 1) { printk(KERN_ERR "%s: Internal error whilst attempting to " - "convert filename memory to scatterlist; " - "expected rc = 1; got rc = [%d]. " + "convert filename memory to scatterlist; rc = [%d]. " "block_aligned_filename_size = [%zd]\n", __func__, rc, s->block_aligned_filename_size); goto out_release_free_unlock; } rc = virt_to_scatterlist(&dest[s->i], s->block_aligned_filename_size, - &s->dst_sg, 1); - if (rc != 1) { + s->dst_sg, 2); + if (rc < 1) { printk(KERN_ERR "%s: Internal error whilst attempting to " "convert encrypted filename memory to scatterlist; " - "expected rc = 1; got rc = [%d]. " - "block_aligned_filename_size = [%zd]\n", __func__, rc, - s->block_aligned_filename_size); + "rc = [%d]. block_aligned_filename_size = [%zd]\n", + __func__, rc, s->block_aligned_filename_size); goto out_release_free_unlock; } /* The characters in the first block effectively do the job @@ -855,7 +853,7 @@ ecryptfs_write_tag_70_packet(char *dest, size_t *remaining_bytes, mount_crypt_stat->global_default_fn_cipher_key_bytes); goto out_release_free_unlock; } - rc = crypto_blkcipher_encrypt_iv(&s->desc, &s->dst_sg, &s->src_sg, + rc = crypto_blkcipher_encrypt_iv(&s->desc, s->dst_sg, s->src_sg, s->block_aligned_filename_size); if (rc) { printk(KERN_ERR "%s: Error attempting to encrypt filename; " @@ -891,8 +889,8 @@ struct ecryptfs_parse_tag_70_packet_silly_stack { struct mutex *tfm_mutex; char *decrypted_filename; struct ecryptfs_auth_tok *auth_tok; - struct scatterlist src_sg; - struct scatterlist dst_sg; + struct scatterlist src_sg[2]; + struct scatterlist dst_sg[2]; struct blkcipher_desc desc; char fnek_sig_hex[ECRYPTFS_SIG_SIZE_HEX + 1]; char iv[ECRYPTFS_MAX_IV_BYTES]; @@ -1008,13 +1006,12 @@ ecryptfs_parse_tag_70_packet(char **filename, size_t *filename_size, } mutex_lock(s->tfm_mutex); rc = virt_to_scatterlist(&data[(*packet_size)], - s->block_aligned_filename_size, &s->src_sg, 1); - if (rc != 1) { + s->block_aligned_filename_size, s->src_sg, 2); + if (rc < 1) { printk(KERN_ERR "%s: Internal error whilst attempting to " "convert encrypted filename memory to scatterlist; " - "expected rc = 1; got rc = [%d]. " - "block_aligned_filename_size = [%zd]\n", __func__, rc, - s->block_aligned_filename_size); + "rc = [%d]. block_aligned_filename_size = [%zd]\n", + __func__, rc, s->block_aligned_filename_size); goto out_unlock; } (*packet_size) += s->block_aligned_filename_size; @@ -1028,13 +1025,12 @@ ecryptfs_parse_tag_70_packet(char **filename, size_t *filename_size, goto out_unlock; } rc = virt_to_scatterlist(s->decrypted_filename, - s->block_aligned_filename_size, &s->dst_sg, 1); - if (rc != 1) { + s->block_aligned_filename_size, s->dst_sg, 2); + if (rc < 1) { printk(KERN_ERR "%s: Internal error whilst attempting to " "convert decrypted filename memory to scatterlist; " - "expected rc = 1; got rc = [%d]. " - "block_aligned_filename_size = [%zd]\n", __func__, rc, - s->block_aligned_filename_size); + "rc = [%d]. block_aligned_filename_size = [%zd]\n", + __func__, rc, s->block_aligned_filename_size); goto out_free_unlock; } /* The characters in the first block effectively do the job of @@ -1065,7 +1061,7 @@ ecryptfs_parse_tag_70_packet(char **filename, size_t *filename_size, mount_crypt_stat->global_default_fn_cipher_key_bytes); goto out_free_unlock; } - rc = crypto_blkcipher_decrypt_iv(&s->desc, &s->dst_sg, &s->src_sg, + rc = crypto_blkcipher_decrypt_iv(&s->desc, s->dst_sg, s->src_sg, s->block_aligned_filename_size); if (rc) { printk(KERN_ERR "%s: Error attempting to decrypt filename; " -- cgit v1.2.3 From a058bfbbeca576cf7c93ac4f16092f13f414434e Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Fri, 27 May 2011 11:47:59 -0500 Subject: MAINTAINERS: Update eCryptfs mailing list The eCryptfs mailing list has moved from lists.launchpad.net to vger.kernel.org. Signed-off-by: Tyler Hicks --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 69f19f10314a..bf02bbe0120d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2302,7 +2302,7 @@ F: net/bridge/netfilter/ebt*.c ECRYPT FILE SYSTEM M: Tyler Hicks M: Dustin Kirkland -L: ecryptfs-devel@lists.launchpad.net +L: ecryptfs@vger.kernel.org W: https://launchpad.net/ecryptfs S: Supported F: Documentation/filesystems/ecryptfs.txt -- cgit v1.2.3 From aac11c1b351413aa3412e258e2b2dcba31777209 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Tue, 24 May 2011 16:28:55 +0200 Subject: iwl4965: fix 5GHz operation rx_status.band is used uninitialized, what disallow to work on 5GHz . Cc: stable@kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/iwl-4965-lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c index 7e5e85a017b5..a7a4739880dc 100644 --- a/drivers/net/wireless/iwlegacy/iwl-4965-lib.c +++ b/drivers/net/wireless/iwlegacy/iwl-4965-lib.c @@ -628,11 +628,11 @@ void iwl4965_rx_reply_rx(struct iwl_priv *priv, /* rx_status carries information about the packet to mac80211 */ rx_status.mactime = le64_to_cpu(phy_res->timestamp); + rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? + IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; rx_status.freq = ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel), rx_status.band); - rx_status.band = (phy_res->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? - IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ; rx_status.rate_idx = iwl4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band); rx_status.flag = 0; -- cgit v1.2.3 From 64bd0821a3b66c3307d7a4ee5523e3e35ec2df0e Mon Sep 17 00:00:00 2001 From: Tao Ma Date: Wed, 25 May 2011 09:44:05 +0800 Subject: wireless: Default to 'n' for 2 new added devices in Kconfig. We make oldconfig every time when a new kernel arrives, but if we don't have such a device(I guess this is the most common case for a new device), the default value should be 'n' so that the kernel size we build doesn't grow up too much quickly. For anyone who has the device, it is OK for them to turn it on by themselves. Cc: "John W. Linville" Cc: Johannes Berg Signed-off-by: Tao Ma Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/Kconfig | 1 - drivers/net/wireless/rt2x00/Kconfig | 1 - 2 files changed, 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig index d9ff8413ab9a..d9c08c619a3a 100644 --- a/drivers/net/wireless/ath/ath9k/Kconfig +++ b/drivers/net/wireless/ath/ath9k/Kconfig @@ -26,7 +26,6 @@ config ATH9K config ATH9K_PCI bool "Atheros ath9k PCI/PCIe bus support" depends on ATH9K && PCI - default PCI ---help--- This option enables the PCI bus support in ath9k. diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 9def1e5369a1..b2f8b8fd4d2d 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -166,7 +166,6 @@ config RT2800USB_RT35XX config RT2800USB_RT53XX bool "rt2800usb - Include support for rt53xx devices (EXPERIMENTAL)" depends on EXPERIMENTAL - default y ---help--- This adds support for rt53xx wireless chipset family to the rt2800pci driver. -- cgit v1.2.3 From a331400bf01231253a0d9ab211c83212d2ac4edb Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Thu, 26 May 2011 11:46:37 +0300 Subject: mac80211: clear local->ps_data on disassoc local->ps_data wasn't cleared on disassociation, which (in some corner cases) caused reconnections to enter psm before association completed. Signed-off-by: Eliad Peller Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 746595597b68..456cccf26b51 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1095,6 +1095,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, local->hw.conf.flags &= ~IEEE80211_CONF_PS; config_changed |= IEEE80211_CONF_CHANGE_PS; } + local->ps_sdata = NULL; ieee80211_hw_config(local, config_changed); -- cgit v1.2.3 From 64c754ed3b0009e4fa248f739000dc234eb0d2c9 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 26 May 2011 10:53:17 +0200 Subject: mac80211: Remove duplicate linux/slab.h include from net/mac80211/scan.c Commit 79f460ca49d8d5700756ab7071c951311c7f29cc add a duplicate linux/slab.h include to net/mac80211/scan.c - remove it. Signed-off-by: Jesper Juhl Acked-by: Luciano Coelho Signed-off-by: John W. Linville --- net/mac80211/scan.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 27af6723cb5e..58ffa7d069c7 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include -- cgit v1.2.3 From 1df85ecec36ad5da3f0165760704310d6c03f65f Mon Sep 17 00:00:00 2001 From: Adrian Chadd Date: Fri, 27 May 2011 01:08:04 +0800 Subject: ath9k: Fix AR9287 calibration The AR9287 calibration code was not being called because of an incorrect MAC revision check. This forced the AR9287 to use the AR9285 initial calibration code and bypass the AR9287 code entirely. Signed-off-by: Adrian Chadd Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_calib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index 015d97439935..2d4c0910295b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -829,7 +829,7 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) if (AR_SREV_9271(ah)) { if (!ar9285_hw_cl_cal(ah, chan)) return false; - } else if (AR_SREV_9285_12_OR_LATER(ah)) { + } else if (AR_SREV_9285(ah) && AR_SREV_9285_12_OR_LATER(ah)) { if (!ar9285_hw_clc(ah, chan)) return false; } else { -- cgit v1.2.3 From e7a46b4d0839c2a3aa2e0ae0b145f293f6738498 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 27 May 2011 04:51:54 +0000 Subject: atm: expose ATM device index in sysfs It's currently exposed only through /proc which, besides requiring screen-scraping, doesn't allow userspace to distinguish between two identical ATM adapters with different ATM indexes. The ATM device index is required when using PPPoATM on a system with multiple ATM adapters. Signed-off-by: Dan Williams Reviewed-by: Eric Dumazet Tested-by: David Woodhouse Cc: stable@kernel.org Signed-off-by: David S. Miller --- net/atm/atm_sysfs.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/net/atm/atm_sysfs.c b/net/atm/atm_sysfs.c index f7fa67c78766..f49da5814bc3 100644 --- a/net/atm/atm_sysfs.c +++ b/net/atm/atm_sysfs.c @@ -59,6 +59,14 @@ static ssize_t show_atmaddress(struct device *cdev, return pos - buf; } +static ssize_t show_atmindex(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + struct atm_dev *adev = to_atm_dev(cdev); + + return sprintf(buf, "%d\n", adev->number); +} + static ssize_t show_carrier(struct device *cdev, struct device_attribute *attr, char *buf) { @@ -99,6 +107,7 @@ static ssize_t show_link_rate(struct device *cdev, static DEVICE_ATTR(address, S_IRUGO, show_address, NULL); static DEVICE_ATTR(atmaddress, S_IRUGO, show_atmaddress, NULL); +static DEVICE_ATTR(atmindex, S_IRUGO, show_atmindex, NULL); static DEVICE_ATTR(carrier, S_IRUGO, show_carrier, NULL); static DEVICE_ATTR(type, S_IRUGO, show_type, NULL); static DEVICE_ATTR(link_rate, S_IRUGO, show_link_rate, NULL); @@ -106,6 +115,7 @@ static DEVICE_ATTR(link_rate, S_IRUGO, show_link_rate, NULL); static struct device_attribute *atm_attrs[] = { &dev_attr_atmaddress, &dev_attr_address, + &dev_attr_atmindex, &dev_attr_carrier, &dev_attr_type, &dev_attr_link_rate, -- cgit v1.2.3 From 686a7e32ca7fdd819eb9606abd3db52b77d1479f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 26 May 2011 17:27:11 +0000 Subject: inetpeer: fix race in unused_list manipulations Several crashes in cleanup_once() were reported in recent kernels. Commit d6cc1d642de9 (inetpeer: various changes) added a race in unlink_from_unused(). One way to avoid taking unused_peers.lock before doing the list_empty() test is to catch 0->1 refcnt transitions, using full barrier atomic operations variants (atomic_cmpxchg() and atomic_inc_return()) instead of previous atomic_inc() and atomic_add_unless() variants. We then call unlink_from_unused() only for the owner of the 0->1 transition. Add a new atomic_add_unless_return() static helper With help from Arun Sharma. Refs: https://bugzilla.kernel.org/show_bug.cgi?id=32772 Reported-by: Arun Sharma Reported-by: Maximilian Engelhardt Reported-by: Yann Dupont Reported-by: Denys Fedoryshchenko Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/inetpeer.c | 42 +++++++++++++++++++++++++++--------------- 1 file changed, 27 insertions(+), 15 deletions(-) diff --git a/net/ipv4/inetpeer.c b/net/ipv4/inetpeer.c index 9df4e635fb5f..ce616d92cc54 100644 --- a/net/ipv4/inetpeer.c +++ b/net/ipv4/inetpeer.c @@ -154,11 +154,9 @@ void __init inet_initpeers(void) /* Called with or without local BH being disabled. */ static void unlink_from_unused(struct inet_peer *p) { - if (!list_empty(&p->unused)) { - spin_lock_bh(&unused_peers.lock); - list_del_init(&p->unused); - spin_unlock_bh(&unused_peers.lock); - } + spin_lock_bh(&unused_peers.lock); + list_del_init(&p->unused); + spin_unlock_bh(&unused_peers.lock); } static int addr_compare(const struct inetpeer_addr *a, @@ -205,6 +203,20 @@ static int addr_compare(const struct inetpeer_addr *a, u; \ }) +static bool atomic_add_unless_return(atomic_t *ptr, int a, int u, int *newv) +{ + int cur, old = atomic_read(ptr); + + while (old != u) { + *newv = old + a; + cur = atomic_cmpxchg(ptr, old, *newv); + if (cur == old) + return true; + old = cur; + } + return false; +} + /* * Called with rcu_read_lock() * Because we hold no lock against a writer, its quite possible we fall @@ -213,7 +225,8 @@ static int addr_compare(const struct inetpeer_addr *a, * We exit from this function if number of links exceeds PEER_MAXDEPTH */ static struct inet_peer *lookup_rcu(const struct inetpeer_addr *daddr, - struct inet_peer_base *base) + struct inet_peer_base *base, + int *newrefcnt) { struct inet_peer *u = rcu_dereference(base->root); int count = 0; @@ -226,7 +239,7 @@ static struct inet_peer *lookup_rcu(const struct inetpeer_addr *daddr, * distinction between an unused entry (refcnt=0) and * a freed one. */ - if (unlikely(!atomic_add_unless(&u->refcnt, 1, -1))) + if (!atomic_add_unless_return(&u->refcnt, 1, -1, newrefcnt)) u = NULL; return u; } @@ -465,22 +478,23 @@ struct inet_peer *inet_getpeer(struct inetpeer_addr *daddr, int create) struct inet_peer_base *base = family_to_base(daddr->family); struct inet_peer *p; unsigned int sequence; - int invalidated; + int invalidated, newrefcnt = 0; /* Look up for the address quickly, lockless. * Because of a concurrent writer, we might not find an existing entry. */ rcu_read_lock(); sequence = read_seqbegin(&base->lock); - p = lookup_rcu(daddr, base); + p = lookup_rcu(daddr, base, &newrefcnt); invalidated = read_seqretry(&base->lock, sequence); rcu_read_unlock(); if (p) { - /* The existing node has been found. +found: /* The existing node has been found. * Remove the entry from unused list if it was there. */ - unlink_from_unused(p); + if (newrefcnt == 1) + unlink_from_unused(p); return p; } @@ -494,11 +508,9 @@ struct inet_peer *inet_getpeer(struct inetpeer_addr *daddr, int create) write_seqlock_bh(&base->lock); p = lookup(daddr, stack, base); if (p != peer_avl_empty) { - atomic_inc(&p->refcnt); + newrefcnt = atomic_inc_return(&p->refcnt); write_sequnlock_bh(&base->lock); - /* Remove the entry from unused list if it was there. */ - unlink_from_unused(p); - return p; + goto found; } p = create ? kmem_cache_alloc(peer_cachep, GFP_ATOMIC) : NULL; if (p) { -- cgit v1.2.3 From 9d931dd2ed62c14d7bf7c4c3ab3ef7610c46ca9b Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 26 May 2011 16:30:57 -0400 Subject: net: Kill ether_table[] declaration. This got missed back in 2006 when Jes Sorensen deleted net/ethernet/sysctl_net_ether.c Signed-off-by: David S. Miller --- include/linux/if_ether.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index 0f1325d98295..0065ffd3226b 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -132,10 +132,6 @@ static inline struct ethhdr *eth_hdr(const struct sk_buff *skb) int eth_header_parse(const struct sk_buff *skb, unsigned char *haddr); -#ifdef CONFIG_SYSCTL -extern struct ctl_table ether_table[]; -#endif - int mac_pton(const char *s, u8 *mac); extern ssize_t sysfs_format_mac(char *buf, const unsigned char *addr, int len); -- cgit v1.2.3 From bee95250f015ffc3a6efb99516489e70d1b52da2 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 26 May 2011 16:40:37 -0400 Subject: net: Add linux/sysctl.h includes where needed. Several networking headers were depending upon the implicit linux/sysctl.h include they get when including linux/net.h Add explicit includes. Signed-off-by: David S. Miller --- include/linux/netfilter.h | 1 + include/net/net_namespace.h | 1 + 2 files changed, 2 insertions(+) diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index 7fa95df60146..857f5026ced6 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -13,6 +13,7 @@ #endif #include #include +#include /* Responses from hook functions. */ #define NF_DROP 0 diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index 3ae491932bc8..07a60e8b749e 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -7,6 +7,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3 From c5c177b4aca83338781e72be2e6dd1601c560cb3 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 27 May 2011 13:41:33 -0400 Subject: net: Kill ratelimit.h dependency in linux/net.h Ingo Molnar noticed that we have this unnecessary ratelimit.h dependency in linux/net.h, which hid compilation problems from people doing builds only with CONFIG_NET enabled. Move this stuff out to a seperate net/net_ratelimit.h file and include that in the only two places where this thing is needed. Signed-off-by: David S. Miller Acked-by: Ingo Molnar --- include/linux/net.h | 6 ------ include/net/net_ratelimit.h | 8 ++++++++ net/core/sysctl_net_core.c | 1 + net/core/utils.c | 1 + 4 files changed, 10 insertions(+), 6 deletions(-) create mode 100644 include/net/net_ratelimit.h diff --git a/include/linux/net.h b/include/linux/net.h index 1da55e9b6f01..b29923006b11 100644 --- a/include/linux/net.h +++ b/include/linux/net.h @@ -289,11 +289,5 @@ extern int kernel_sock_shutdown(struct socket *sock, MODULE_ALIAS("net-pf-" __stringify(pf) "-proto-" __stringify(proto) \ "-type-" __stringify(type)) -#ifdef CONFIG_SYSCTL -#include -#include -extern struct ratelimit_state net_ratelimit_state; -#endif - #endif /* __KERNEL__ */ #endif /* _LINUX_NET_H */ diff --git a/include/net/net_ratelimit.h b/include/net/net_ratelimit.h new file mode 100644 index 000000000000..7727b4247daf --- /dev/null +++ b/include/net/net_ratelimit.h @@ -0,0 +1,8 @@ +#ifndef _LINUX_NET_RATELIMIT_H +#define _LINUX_NET_RATELIMIT_H + +#include + +extern struct ratelimit_state net_ratelimit_state; + +#endif /* _LINUX_NET_RATELIMIT_H */ diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c index a829e3f60aeb..77a65f031488 100644 --- a/net/core/sysctl_net_core.c +++ b/net/core/sysctl_net_core.c @@ -17,6 +17,7 @@ #include #include +#include #ifdef CONFIG_RPS static int rps_sock_flow_sysctl(ctl_table *table, int write, diff --git a/net/core/utils.c b/net/core/utils.c index 2012bc797f9c..386e263f6066 100644 --- a/net/core/utils.c +++ b/net/core/utils.c @@ -27,6 +27,7 @@ #include #include +#include #include #include -- cgit v1.2.3 From 646aaea615704010b5fd2c8c8891ff1a3a4b4f1a Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 27 May 2011 11:00:41 -0300 Subject: perf tools: Make sure kptr_restrict warnings fit 80 col terms Suggested-by: Ingo Molnar Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi Link: http://lkml.kernel.org/n/tip-i1p8vrhq7xveyui6t1sc914e@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-record.c | 19 ++++++++----------- tools/perf/builtin-report.c | 17 +++++++---------- 2 files changed, 15 insertions(+), 21 deletions(-) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 2ca107f3efdf..8e2c85798185 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -824,17 +824,14 @@ int cmd_record(int argc, const char **argv, const char *prefix __used) symbol__init(); if (symbol_conf.kptr_restrict) - pr_warning("WARNING: Kernel address maps " - "(/proc/{kallsyms,modules}) are restricted, " - "check /proc/sys/kernel/kptr_restrict.\n\n" - "Samples in kernel functions may not be resolved " - "if a suitable vmlinux file is not found in the " - "buildid cache or in the vmlinux path.\n\n" - "Samples in kernel modules won't be resolved " - "at all.\n\n" - "If some relocation was applied (e.g. kexec) " - "symbols may be misresolved even with a suitable " - "vmlinux or kallsyms file.\n\n"); + pr_warning( +"WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted,\n" +"check /proc/sys/kernel/kptr_restrict.\n\n" +"Samples in kernel functions may not be resolved if a suitable vmlinux\n" +"file is not found in the buildid cache or in the vmlinux path.\n\n" +"Samples in kernel modules won't be resolved at all.\n\n" +"If some relocation was applied (e.g. kexec) symbols may be misresolved\n" +"even with a suitable vmlinux or kallsyms file.\n\n"); if (no_buildid_cache || no_buildid) disable_buildid_cache(); diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 99156c35bc62..287a173523a7 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -281,17 +281,14 @@ static int __cmd_report(void) kernel_kmap->ref_reloc_sym->addr == 0))) { const struct dso *kdso = kernel_map->dso; - ui__warning("Kernel address maps " - "(/proc/{kallsyms,modules}) were restricted, " - "check /proc/sys/kernel/kptr_restrict before " - "running 'perf record'.\n\n%s\n\n" - "Samples in kernel modules can't be resolved " - "as well.\n\n", + ui__warning( +"Kernel address maps (/proc/{kallsyms,modules}) were restricted.\n\n" +"Check /proc/sys/kernel/kptr_restrict before running 'perf record'.\n\n%s\n\n" +"Samples in kernel modules can't be resolved as well.\n\n", RB_EMPTY_ROOT(&kdso->symbols[MAP__FUNCTION]) ? - "As no suitable kallsyms nor vmlinux was found, " - "kernel samples can't be resolved." : - "If some relocation was applied (e.g. kexec) " - "symbols may be misresolved."); +"As no suitable kallsyms nor vmlinux was found, kernel samples\n" +"can't be resolved." : +"If some relocation was applied (e.g. kexec) symbols may be misresolved."); } if (dump_trace) { -- cgit v1.2.3 From 4af4c9550ccaaf0b53013ff730bc15068ffe6abc Mon Sep 17 00:00:00 2001 From: David Ahern Date: Fri, 27 May 2011 09:58:34 -0600 Subject: perf events: initialize fd array to -1 instead of 0 perf_evsel__alloc_fd allocates an array of file descriptors with the memory initialized to 0. The array has dimensions for cpus and threads. Later, __perf_evsel__open calls sys_perf_event_open for each cpu and thread dimensions. If the open fails for any of the cpus or threads then the fd's for this event are closed and the fd entry in the array is set to -1. Now, if the first attempt fails for the event (e.g., the event is not supported) the remaining dimensions (cpu > 0 and thread > 0) are not touched and left at the initialized value of 0. builtin-stat catches ENOENT and ENOSYS failures and allows the command to continue. The end result is that stat attempts to read from an fd of 0 which of course is stdin and so the command hangs until you type ctrl-D. Resolve by initializing the array to -1 since an fd < 0 is already handled. Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1306511914-8016-1-git-send-email-dsahern@gmail.com Signed-off-by: David Ahern Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/evsel.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index ee0fe0dffa71..cca29ededb5b 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -35,7 +35,17 @@ struct perf_evsel *perf_evsel__new(struct perf_event_attr *attr, int idx) int perf_evsel__alloc_fd(struct perf_evsel *evsel, int ncpus, int nthreads) { + int cpu, thread; evsel->fd = xyarray__new(ncpus, nthreads, sizeof(int)); + + if (evsel->fd) { + for (cpu = 0; cpu < ncpus; cpu++) { + for (thread = 0; thread < nthreads; thread++) { + FD(evsel, cpu, thread) = -1; + } + } + } + return evsel->fd != NULL ? 0 : -ENOMEM; } -- cgit v1.2.3 From 59fb1ee95e74e8e0777289c44300cbe812aca836 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 27 May 2011 11:14:00 -0300 Subject: perf top: Remove unused macro Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi Link: http://lkml.kernel.org/n/tip-weqbs0tkk2u0qp1xxdxxosfg@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-top.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 2d7934e9de38..375ed160d936 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -62,8 +62,6 @@ #include #include -#define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y)) - static struct perf_top top = { .count_filter = 5, .delay_secs = 2, -- cgit v1.2.3 From 5f6f55809758e106eca72c6e01402c8080a88ee8 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 27 May 2011 11:53:28 -0300 Subject: perf top: Handle kptr_restrict Reported-by: Ingo Molnar Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi Link: http://lkml.kernel.org/n/tip-cyl5zmi1nu35vyu7l5im2pyv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-top.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 375ed160d936..472f62790022 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -80,6 +80,7 @@ static bool use_tui, use_stdio; static int default_interval = 0; +static bool kptr_restrict_warned; static bool inherit = false; static int realtime_prio = 0; static bool group = false; @@ -738,6 +739,20 @@ static void perf_event__process_sample(const union perf_event *event, al.filtered) return; + if (!kptr_restrict_warned && + symbol_conf.kptr_restrict && + al.cpumode == PERF_RECORD_MISC_KERNEL) { + ui__warning( +"Kernel address maps (/proc/{kallsyms,modules}) are restricted.\n\n" +"Check /proc/sys/kernel/kptr_restrict.\n\n" +"Kernel%s samples will not be resolved.\n", + !RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION]) ? + " modules" : ""); + if (use_browser <= 0) + sleep(5); + kptr_restrict_warned = true; + } + if (al.sym == NULL) { /* * As we do lazy loading of symtabs we only will know if the -- cgit v1.2.3 From e4a338d05df93ab1ebf291aca1e753064319d301 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 27 May 2011 13:42:16 -0300 Subject: perf top: Don't stop if no kernel symtab is found We now just warn the user about the fact and go on providing just userspace samples. This fixes a problem when no vmlinux is explicetely passed by the user, thus symbol_conf.vmlinux_name is NULL, no suitable vmlinux is found, and then we get: aldebaran:~> perf top -p 7557 [kernel.kallsyms] with build id 44d9a989eabbd79e486bc079d6b743d397c204e0 not found, continuing without symbols The (null) file can't be used Reported-by: Ingo Molnar Cc: Frederic Weisbecker Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tom Zanussi Link: http://lkml.kernel.org/n/tip-cj2g81hn64wv2bipmqk4fy2m@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-top.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 472f62790022..f2f3f4937aa2 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -81,6 +81,7 @@ static bool use_tui, use_stdio; static int default_interval = 0; static bool kptr_restrict_warned; +static bool vmlinux_warned; static bool inherit = false; static int realtime_prio = 0; static bool group = false; @@ -754,6 +755,7 @@ static void perf_event__process_sample(const union perf_event *event, } if (al.sym == NULL) { + const char *msg = "Kernel samples will not be resolved.\n"; /* * As we do lazy loading of symtabs we only will know if the * specified vmlinux file is invalid when we actually have a @@ -765,12 +767,20 @@ static void perf_event__process_sample(const union perf_event *event, * --hide-kernel-symbols, even if the user specifies an * invalid --vmlinux ;-) */ - if (al.map == machine->vmlinux_maps[MAP__FUNCTION] && + if (!kptr_restrict_warned && !vmlinux_warned && + al.map == machine->vmlinux_maps[MAP__FUNCTION] && RB_EMPTY_ROOT(&al.map->dso->symbols[MAP__FUNCTION])) { - ui__warning("The %s file can't be used\n", - symbol_conf.vmlinux_name); - exit_browser(0); - exit(1); + if (symbol_conf.vmlinux_name) { + ui__warning("The %s file can't be used.\n%s", + symbol_conf.vmlinux_name, msg); + } else { + ui__warning("A vmlinux file was not found.\n%s", + msg); + } + + if (use_browser <= 0) + sleep(5); + vmlinux_warned = true; } return; -- cgit v1.2.3 From 69e848c2090aebba5698a1620604c7dccb448684 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Tue, 22 Feb 2011 09:57:15 -0800 Subject: Intel xhci: Support EHCI/xHCI port switching. The Intel Panther Point chipsets contain an EHCI and xHCI host controller that shares some number of skew-dependent ports. These ports can be switched from the EHCI to the xHCI host (and vice versa) by a hardware MUX that is controlled by registers in the xHCI PCI configuration space. The USB 3.0 SuperSpeed terminations on the xHCI ports can be controlled separately from the USB 2.0 data wires. This switchover mechanism is there to support users who do a custom install of certain non-Linux operating systems that don't have official USB 3.0 support. By default, the ports are under EHCI, SuperSpeed terminations are off, and USB 3.0 devices will show up under the EHCI controller at reduced speeds. (This was more palatable for the marketing folks than having completely dead USB 3.0 ports if no xHCI drivers are available.) Users should be able to turn on xHCI by default through a BIOS option, but users are happiest when they don't have to change random BIOS settings. This patch introduces a driver method to switchover the ports from EHCI to xHCI before the EHCI driver finishes PCI enumeration. We want to switch the ports over before the USB core has the chance to enumerate devices under EHCI, or boot from USB mass storage will fail if the boot device connects under EHCI first, and then gets disconnected when the port switches over to xHCI. Add code to the xHCI PCI quirk to switch the ports from EHCI to xHCI. The PCI quirks code will run before any other PCI probe function is called, so this avoids the issue with boot devices. Another issue is with BIOS behavior during system resume from hibernate. If the BIOS doesn't support xHCI, it may switch the devices under EHCI to allow use of the USB keyboard, mice, and mass storage devices. It's supposed to remember the value of the port routing registers and switch them back when the OS attempts to take control of the xHCI host controller, but we all know not to trust BIOS writers. Make both the xHCI driver and the EHCI driver attempt to switchover the ports in their PCI resume functions. We can't guarantee which PCI device will be resumed first, so this avoids any race conditions. Writing a '1' to an already set port switchover bit or a '0' to a cleared port switchover bit should have no effect. The xHCI PCI configuration registers will be documented in the EDS-level chipset spec, which is not public yet. I have permission from legal and the Intel chipset group to release this patch early to allow good Linux support at product launch. I've tried to document the registers as much as possible, so please let me know if anything is unclear. Signed-off-by: Sarah Sharp --- drivers/usb/host/ehci-pci.c | 39 +++++++++++++++++++++++++++ drivers/usb/host/pci-quirks.c | 63 +++++++++++++++++++++++++++++++++++++++++++ drivers/usb/host/pci-quirks.h | 2 ++ drivers/usb/host/xhci-pci.c | 20 ++++++++++++++ 4 files changed, 124 insertions(+) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 660b80a75cac..1102ce65a3a9 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -348,11 +348,50 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) return rc; } +static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev) +{ + return pdev->class == PCI_CLASS_SERIAL_USB_EHCI && + pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == 0x1E26; +} + +static void ehci_enable_xhci_companion(void) +{ + struct pci_dev *companion = NULL; + + /* The xHCI and EHCI controllers are not on the same PCI slot */ + for_each_pci_dev(companion) { + if (!usb_is_intel_switchable_xhci(companion)) + continue; + usb_enable_xhci_ports(companion); + return; + } +} + static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + /* The BIOS on systems with the Intel Panther Point chipset may or may + * not support xHCI natively. That means that during system resume, it + * may switch the ports back to EHCI so that users can use their + * keyboard to select a kernel from GRUB after resume from hibernate. + * + * The BIOS is supposed to remember whether the OS had xHCI ports + * enabled before resume, and switch the ports back to xHCI when the + * BIOS/OS semaphore is written, but we all know we can't trust BIOS + * writers. + * + * Unconditionally switch the ports back to xHCI after a system resume. + * We can't tell whether the EHCI or xHCI controller will be resumed + * first, so we have to do the port switchover in both drivers. Writing + * a '1' to the port switchover registers should have no effect if the + * port was already switched over. + */ + if (usb_is_intel_switchable_ehci(pdev)) + ehci_enable_xhci_companion(); + // maybe restore FLADJ if (time_before(jiffies, ehci->next_statechange)) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index f16c59d5f487..fd930618c28f 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -69,6 +69,9 @@ #define NB_PIF0_PWRDOWN_0 0x01100012 #define NB_PIF0_PWRDOWN_1 0x01100013 +#define USB_INTEL_XUSB2PR 0xD0 +#define USB_INTEL_USB3_PSSEN 0xD8 + static struct amd_chipset_info { struct pci_dev *nb_dev; struct pci_dev *smbus_dev; @@ -673,6 +676,64 @@ static int handshake(void __iomem *ptr, u32 mask, u32 done, return -ETIMEDOUT; } +bool usb_is_intel_switchable_xhci(struct pci_dev *pdev) +{ + return pdev->class == PCI_CLASS_SERIAL_USB_XHCI && + pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI; +} +EXPORT_SYMBOL_GPL(usb_is_intel_switchable_xhci); + +/* + * Intel's Panther Point chipset has two host controllers (EHCI and xHCI) that + * share some number of ports. These ports can be switched between either + * controller. Not all of the ports under the EHCI host controller may be + * switchable. + * + * The ports should be switched over to xHCI before PCI probes for any device + * start. This avoids active devices under EHCI being disconnected during the + * port switchover, which could cause loss of data on USB storage devices, or + * failed boot when the root file system is on a USB mass storage device and is + * enumerated under EHCI first. + * + * We write into the xHC's PCI configuration space in some Intel-specific + * registers to switch the ports over. The USB 3.0 terminations and the USB + * 2.0 data wires are switched separately. We want to enable the SuperSpeed + * terminations before switching the USB 2.0 wires over, so that USB 3.0 + * devices connect at SuperSpeed, rather than at USB 2.0 speeds. + */ +void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) +{ + u32 ports_available; + + ports_available = 0xffffffff; + /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable + * Register, to turn on SuperSpeed terminations for all + * available ports. + */ + pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, + cpu_to_le32(ports_available)); + + pci_read_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, + &ports_available); + dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled " + "under xHCI: 0x%x\n", ports_available); + + ports_available = 0xffffffff; + /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to + * switch the USB 2.0 power and data lines over to the xHCI + * host. + */ + pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, + cpu_to_le32(ports_available)); + + pci_read_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, + &ports_available); + dev_dbg(&xhci_pdev->dev, "USB 2.0 ports that are now switched over " + "to xHCI: 0x%x\n", ports_available); +} +EXPORT_SYMBOL_GPL(usb_enable_xhci_ports); + /** * PCI Quirks for xHCI. * @@ -732,6 +793,8 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) writel(XHCI_LEGACY_DISABLE_SMI, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); + if (usb_is_intel_switchable_xhci(pdev)) + usb_enable_xhci_ports(pdev); hc_init: op_reg_base = base + XHCI_HC_LENGTH(readl(base)); diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index 6ae9f78e9938..b1002a8ef96f 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -8,6 +8,8 @@ int usb_amd_find_chipset_info(void); void usb_amd_dev_put(void); void usb_amd_quirk_pll_disable(void); void usb_amd_quirk_pll_enable(void); +bool usb_is_intel_switchable_xhci(struct pci_dev *pdev); +void usb_enable_xhci_ports(struct pci_dev *xhci_pdev); #else static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index cbc4d491e626..faf039ac6573 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -242,8 +242,28 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup) static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); int retval = 0; + /* The BIOS on systems with the Intel Panther Point chipset may or may + * not support xHCI natively. That means that during system resume, it + * may switch the ports back to EHCI so that users can use their + * keyboard to select a kernel from GRUB after resume from hibernate. + * + * The BIOS is supposed to remember whether the OS had xHCI ports + * enabled before resume, and switch the ports back to xHCI when the + * BIOS/OS semaphore is written, but we all know we can't trust BIOS + * writers. + * + * Unconditionally switch the ports back to xHCI after a system resume. + * We can't tell whether the EHCI or xHCI controller will be resumed + * first, so we have to do the port switchover in both drivers. Writing + * a '1' to the port switchover registers should have no effect if the + * port was already switched over. + */ + if (usb_is_intel_switchable_xhci(pdev)) + usb_enable_xhci_ports(pdev); + retval = xhci_resume(xhci, hibernated); return retval; } -- cgit v1.2.3 From ad808333d8201d53075a11bc8dd83b81f3d68f0b Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 25 May 2011 10:43:56 -0700 Subject: Intel xhci: Ignore spurious successful event. The xHCI host controller in the Panther Point chipset sometimes produces spurious events on the event ring. If it receives a short packet, it first puts a Transfer Event with a short transfer completion code on the event ring. Then it puts a Transfer Event with a successful completion code on the ring for the same TD. The xHCI driver correctly processes the short transfer completion code, gives the URB back to the driver, and then prints a warning in dmesg about the spurious event. These warning messages really fill up dmesg when an HD webcam is plugged into xHCI. This spurious successful event behavior isn't technically disallowed by the xHCI specification, so make the xHCI driver just ignore the spurious completion event. Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-pci.c | 4 ++++ drivers/usb/host/xhci-ring.c | 14 ++++++++++++++ drivers/usb/host/xhci.h | 2 ++ 3 files changed, 20 insertions(+) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index faf039ac6573..eafd17fae949 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -118,6 +118,10 @@ static int xhci_pci_setup(struct usb_hcd *hcd) /* AMD PLL quirk */ if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info()) xhci->quirks |= XHCI_AMD_PLL_FIX; + if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { + xhci->quirks |= XHCI_SPURIOUS_SUCCESS; + } /* Make sure the HC is halted. */ retval = xhci_halt(xhci); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index d1498c03c4cb..56f6c584c651 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2061,6 +2061,16 @@ static int handle_tx_event(struct xhci_hcd *xhci, if (!event_seg) { if (!ep->skip || !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) { + /* Some host controllers give a spurious + * successful event after a short transfer. + * Ignore it. + */ + if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) && + ep_ring->last_td_was_short) { + ep_ring->last_td_was_short = false; + ret = 0; + goto cleanup; + } /* HC is busted, give up! */ xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not " @@ -2071,6 +2081,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, ret = skip_isoc_td(xhci, td, event, ep, &status); goto cleanup; } + if (trb_comp_code == COMP_SHORT_TX) + ep_ring->last_td_was_short = true; + else + ep_ring->last_td_was_short = false; if (ep->skip) { xhci_dbg(xhci, "Found td. Clear skip flag.\n"); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 0772a8cfea23..5cfeb8614b87 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1123,6 +1123,7 @@ struct xhci_ring { */ u32 cycle_state; unsigned int stream_id; + bool last_td_was_short; }; struct xhci_erst_entry { @@ -1290,6 +1291,7 @@ struct xhci_hcd { #define XHCI_RESET_EP_QUIRK (1 << 1) #define XHCI_NEC_HOST (1 << 2) #define XHCI_AMD_PLL_FIX (1 << 3) +#define XHCI_SPURIOUS_SUCCESS (1 << 4) /* There are two roothubs to keep track of bus suspend info for */ struct xhci_bus_state bus_state[2]; /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ -- cgit v1.2.3 From 2cf95c18d5069e13c02a8667d91e064df8e17e09 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Wed, 11 May 2011 16:14:58 -0700 Subject: Intel xhci: Limit number of active endpoints to 64. The Panther Point chipset has an xHCI host controller that has a limit to the number of active endpoints it can handle. Ideally, it would signal that it can't handle anymore endpoints by returning a Resource Error for the Configure Endpoint command, but they don't. Instead it needs software to keep track of the number of active endpoints, across configure endpoint commands, reset device commands, disable slot commands, and address device commands. Add a new endpoint context counter, xhci_hcd->num_active_eps, and use it to track the number of endpoints the xHC has active. This gets a little tricky, because commands to change the number of active endpoints can fail. This patch adds a new xHCI quirk for these Intel hosts, and the new code should not have any effect on other xHCI host controllers. Fail a new device allocation if we don't have room for the new default control endpoint. Use the endpoint ring pointers to determine what endpoints were active before a Reset Device command or a Disable Slot command, and drop those once the command completes. Fail a configure endpoint command if it would add too many new endpoints. We have to be a bit over zealous here, and only count the number of new endpoints to be added, without subtracting the number of dropped endpoints. That's because a second configure endpoint command for a different device could sneak in before we know if the first command is completed. If the first command dropped resources, the host controller fails the command for some reason, and we're nearing the limit of endpoints, we could end up oversubscribing the host. To fix this race condition, when evaluating whether a configure endpoint command will fix in our bandwidth budget, only add the new endpoints to xhci->num_active_eps, and don't subtract the dropped endpoints. Ignore changed endpoints (ones that are dropped and then re-added), as that shouldn't effect the host's endpoint resources. When the configure endpoint command completes, subtract off the dropped endpoints. This may mean some configuration changes may temporarily fail, but it's always better to under-subscribe than over-subscribe resources. (Originally my plan had been to push the resource allocation down into the ring allocation functions. However, that would cause us to allocate unnecessary resources when endpoints were changed, because the xHCI driver allocates a new ring for the changed endpoint, and only deletes the old ring once the Configure Endpoint command succeeds. A further complication would have been dealing with the per-device endpoint ring cache.) Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-pci.c | 2 + drivers/usb/host/xhci-ring.c | 7 +- drivers/usb/host/xhci.c | 232 +++++++++++++++++++++++++++++++++++++++++-- drivers/usb/host/xhci.h | 14 +++ 4 files changed, 244 insertions(+), 11 deletions(-) diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index eafd17fae949..c408e9f6a707 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -121,6 +121,8 @@ static int xhci_pci_setup(struct usb_hcd *hcd) if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) { xhci->quirks |= XHCI_SPURIOUS_SUCCESS; + xhci->quirks |= XHCI_EP_LIMIT_QUIRK; + xhci->limit_active_eps = 64; } /* Make sure the HC is halted. */ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 56f6c584c651..cc1485bfed38 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1081,8 +1081,13 @@ static void handle_cmd_completion(struct xhci_hcd *xhci, complete(&xhci->addr_dev); break; case TRB_TYPE(TRB_DISABLE_SLOT): - if (xhci->devs[slot_id]) + if (xhci->devs[slot_id]) { + if (xhci->quirks & XHCI_EP_LIMIT_QUIRK) + /* Delete default control endpoint resources */ + xhci_free_device_endpoint_resources(xhci, + xhci->devs[slot_id], true); xhci_free_virt_device(xhci, slot_id); + } break; case TRB_TYPE(TRB_CONFIG_EP): virt_dev = xhci->devs[slot_id]; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 58183d2a8089..d9660eb97eb9 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1582,6 +1582,113 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci, return ret; } +static u32 xhci_count_num_new_endpoints(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx) +{ + struct xhci_input_control_ctx *ctrl_ctx; + u32 valid_add_flags; + u32 valid_drop_flags; + + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + /* Ignore the slot flag (bit 0), and the default control endpoint flag + * (bit 1). The default control endpoint is added during the Address + * Device command and is never removed until the slot is disabled. + */ + valid_add_flags = ctrl_ctx->add_flags >> 2; + valid_drop_flags = ctrl_ctx->drop_flags >> 2; + + /* Use hweight32 to count the number of ones in the add flags, or + * number of endpoints added. Don't count endpoints that are changed + * (both added and dropped). + */ + return hweight32(valid_add_flags) - + hweight32(valid_add_flags & valid_drop_flags); +} + +static unsigned int xhci_count_num_dropped_endpoints(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx) +{ + struct xhci_input_control_ctx *ctrl_ctx; + u32 valid_add_flags; + u32 valid_drop_flags; + + ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx); + valid_add_flags = ctrl_ctx->add_flags >> 2; + valid_drop_flags = ctrl_ctx->drop_flags >> 2; + + return hweight32(valid_drop_flags) - + hweight32(valid_add_flags & valid_drop_flags); +} + +/* + * We need to reserve the new number of endpoints before the configure endpoint + * command completes. We can't subtract the dropped endpoints from the number + * of active endpoints until the command completes because we can oversubscribe + * the host in this case: + * + * - the first configure endpoint command drops more endpoints than it adds + * - a second configure endpoint command that adds more endpoints is queued + * - the first configure endpoint command fails, so the config is unchanged + * - the second command may succeed, even though there isn't enough resources + * + * Must be called with xhci->lock held. + */ +static int xhci_reserve_host_resources(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx) +{ + u32 added_eps; + + added_eps = xhci_count_num_new_endpoints(xhci, in_ctx); + if (xhci->num_active_eps + added_eps > xhci->limit_active_eps) { + xhci_dbg(xhci, "Not enough ep ctxs: " + "%u active, need to add %u, limit is %u.\n", + xhci->num_active_eps, added_eps, + xhci->limit_active_eps); + return -ENOMEM; + } + xhci->num_active_eps += added_eps; + xhci_dbg(xhci, "Adding %u ep ctxs, %u now active.\n", added_eps, + xhci->num_active_eps); + return 0; +} + +/* + * The configure endpoint was failed by the xHC for some other reason, so we + * need to revert the resources that failed configuration would have used. + * + * Must be called with xhci->lock held. + */ +static void xhci_free_host_resources(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx) +{ + u32 num_failed_eps; + + num_failed_eps = xhci_count_num_new_endpoints(xhci, in_ctx); + xhci->num_active_eps -= num_failed_eps; + xhci_dbg(xhci, "Removing %u failed ep ctxs, %u now active.\n", + num_failed_eps, + xhci->num_active_eps); +} + +/* + * Now that the command has completed, clean up the active endpoint count by + * subtracting out the endpoints that were dropped (but not changed). + * + * Must be called with xhci->lock held. + */ +static void xhci_finish_resource_reservation(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx) +{ + u32 num_dropped_eps; + + num_dropped_eps = xhci_count_num_dropped_endpoints(xhci, in_ctx); + xhci->num_active_eps -= num_dropped_eps; + if (num_dropped_eps) + xhci_dbg(xhci, "Removing %u dropped ep ctxs, %u now active.\n", + num_dropped_eps, + xhci->num_active_eps); +} + /* Issue a configure endpoint command or evaluate context command * and wait for it to finish. */ @@ -1602,6 +1709,15 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, virt_dev = xhci->devs[udev->slot_id]; if (command) { in_ctx = command->in_ctx; + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) && + xhci_reserve_host_resources(xhci, in_ctx)) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_warn(xhci, "Not enough host resources, " + "active endpoint contexts = %u\n", + xhci->num_active_eps); + return -ENOMEM; + } + cmd_completion = command->completion; cmd_status = &command->status; command->command_trb = xhci->cmd_ring->enqueue; @@ -1617,6 +1733,14 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, list_add_tail(&command->cmd_list, &virt_dev->cmd_list); } else { in_ctx = virt_dev->in_ctx; + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK) && + xhci_reserve_host_resources(xhci, in_ctx)) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_warn(xhci, "Not enough host resources, " + "active endpoint contexts = %u\n", + xhci->num_active_eps); + return -ENOMEM; + } cmd_completion = &virt_dev->cmd_completion; cmd_status = &virt_dev->cmd_status; } @@ -1631,6 +1755,8 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, if (ret < 0) { if (command) list_del(&command->cmd_list); + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) + xhci_free_host_resources(xhci, in_ctx); spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "FIXME allocate a new ring segment\n"); return -ENOMEM; @@ -1653,8 +1779,22 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, } if (!ctx_change) - return xhci_configure_endpoint_result(xhci, udev, cmd_status); - return xhci_evaluate_context_result(xhci, udev, cmd_status); + ret = xhci_configure_endpoint_result(xhci, udev, cmd_status); + else + ret = xhci_evaluate_context_result(xhci, udev, cmd_status); + + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { + spin_lock_irqsave(&xhci->lock, flags); + /* If the command failed, remove the reserved resources. + * Otherwise, clean up the estimate to include dropped eps. + */ + if (ret) + xhci_free_host_resources(xhci, in_ctx); + else + xhci_finish_resource_reservation(xhci, in_ctx); + spin_unlock_irqrestore(&xhci->lock, flags); + } + return ret; } /* Called after one or more calls to xhci_add_endpoint() or @@ -2271,6 +2411,34 @@ int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, return 0; } +/* + * Deletes endpoint resources for endpoints that were active before a Reset + * Device command, or a Disable Slot command. The Reset Device command leaves + * the control endpoint intact, whereas the Disable Slot command deletes it. + * + * Must be called with xhci->lock held. + */ +void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, bool drop_control_ep) +{ + int i; + unsigned int num_dropped_eps = 0; + unsigned int drop_flags = 0; + + for (i = (drop_control_ep ? 0 : 1); i < 31; i++) { + if (virt_dev->eps[i].ring) { + drop_flags |= 1 << i; + num_dropped_eps++; + } + } + xhci->num_active_eps -= num_dropped_eps; + if (num_dropped_eps) + xhci_dbg(xhci, "Dropped %u ep ctxs, flags = 0x%x, " + "%u now active.\n", + num_dropped_eps, drop_flags, + xhci->num_active_eps); +} + /* * This submits a Reset Device Command, which will set the device state to 0, * set the device address to 0, and disable all the endpoints except the default @@ -2412,6 +2580,14 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) goto command_cleanup; } + /* Free up host controller endpoint resources */ + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { + spin_lock_irqsave(&xhci->lock, flags); + /* Don't delete the default control endpoint resources */ + xhci_free_device_endpoint_resources(xhci, virt_dev, false); + spin_unlock_irqrestore(&xhci->lock, flags); + } + /* Everything but endpoint 0 is disabled, so free or cache the rings. */ last_freed_endpoint = 1; for (i = 1; i < 31; ++i) { @@ -2484,6 +2660,27 @@ void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev) */ } +/* + * Checks if we have enough host controller resources for the default control + * endpoint. + * + * Must be called with xhci->lock held. + */ +static int xhci_reserve_host_control_ep_resources(struct xhci_hcd *xhci) +{ + if (xhci->num_active_eps + 1 > xhci->limit_active_eps) { + xhci_dbg(xhci, "Not enough ep ctxs: " + "%u active, need to add 1, limit is %u.\n", + xhci->num_active_eps, xhci->limit_active_eps); + return -ENOMEM; + } + xhci->num_active_eps += 1; + xhci_dbg(xhci, "Adding 1 ep ctx, %u now active.\n", + xhci->num_active_eps); + return 0; +} + + /* * Returns 0 if the xHC ran out of device slots, the Enable Slot command * timed out, or allocating memory failed. Returns 1 on success. @@ -2519,24 +2716,39 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) xhci_err(xhci, "Error while assigning device slot ID\n"); return 0; } - /* xhci_alloc_virt_device() does not touch rings; no need to lock. - * Use GFP_NOIO, since this function can be called from + + if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) { + spin_lock_irqsave(&xhci->lock, flags); + ret = xhci_reserve_host_control_ep_resources(xhci); + if (ret) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_warn(xhci, "Not enough host resources, " + "active endpoint contexts = %u\n", + xhci->num_active_eps); + goto disable_slot; + } + spin_unlock_irqrestore(&xhci->lock, flags); + } + /* Use GFP_NOIO, since this function can be called from * xhci_discover_or_reset_device(), which may be called as part of * mass storage driver error handling. */ if (!xhci_alloc_virt_device(xhci, xhci->slot_id, udev, GFP_NOIO)) { - /* Disable slot, if we can do it without mem alloc */ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n"); - spin_lock_irqsave(&xhci->lock, flags); - if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) - xhci_ring_cmd_db(xhci); - spin_unlock_irqrestore(&xhci->lock, flags); - return 0; + goto disable_slot; } udev->slot_id = xhci->slot_id; /* Is this a LS or FS device under a HS hub? */ /* Hub or peripherial? */ return 1; + +disable_slot: + /* Disable slot, if we can do it without mem alloc */ + spin_lock_irqsave(&xhci->lock, flags); + if (!xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) + xhci_ring_cmd_db(xhci); + spin_unlock_irqrestore(&xhci->lock, flags); + return 0; } /* diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 5cfeb8614b87..ac0196e7fcf1 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1292,6 +1292,18 @@ struct xhci_hcd { #define XHCI_NEC_HOST (1 << 2) #define XHCI_AMD_PLL_FIX (1 << 3) #define XHCI_SPURIOUS_SUCCESS (1 << 4) +/* + * Certain Intel host controllers have a limit to the number of endpoint + * contexts they can handle. Ideally, they would signal that they can't handle + * anymore endpoint contexts by returning a Resource Error for the Configure + * Endpoint command, but they don't. Instead they expect software to keep track + * of the number of active endpoints for them, across configure endpoint + * commands, reset device commands, disable slot commands, and address device + * commands. + */ +#define XHCI_EP_LIMIT_QUIRK (1 << 5) + unsigned int num_active_eps; + unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ struct xhci_bus_state bus_state[2]; /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */ @@ -1435,6 +1447,8 @@ void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci, void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci, struct xhci_ep_ctx *ep_ctx, struct xhci_virt_ep *ep); +void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, bool drop_control_ep); struct xhci_ring *xhci_dma_to_transfer_ring( struct xhci_virt_ep *ep, u64 address); -- cgit v1.2.3 From 4f61258f6111e2afd56cf40989e5a43cba9e59c8 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 27 May 2011 20:40:18 +0000 Subject: [CIFS] Follow on to cifsacl endian patch (__constant_cpu_to_le32 was required) As Jeff just pointed out, __constant_cpu_to_le32 was required instead of cpu_to_le32 in previous patch to cifsacl.c 383c55350fb4ab6bd08abfab82038ae0364f1f48 (Fix endian error comparing authusers when cifsacl enabled) CC: Stable Reviewed-by: Jeff Layton CC: Shirish Pargaonkar Signed-off-by: Steve French --- fs/cifs/cifsacl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index 5f02b4ee9a03..8f1700623b41 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -38,7 +38,7 @@ static const struct cifs_sid sid_everyone = { 1, 1, {0, 0, 0, 0, 0, 1}, {0} }; /* security id for Authenticated Users system group */ static const struct cifs_sid sid_authusers = { - 1, 1, {0, 0, 0, 0, 0, 5}, {cpu_to_le32(11)} }; + 1, 1, {0, 0, 0, 0, 0, 5}, {__constant_cpu_to_le32(11)} }; /* group users */ static const struct cifs_sid sid_user = {1, 2 , {0, 0, 0, 0, 0, 5}, {} }; -- cgit v1.2.3 From fe19a96b10032035a35779f42ad59e35d6dd8ffd Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 18 Mar 2011 20:21:23 -0400 Subject: SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback... The TCP connection state code depends on the state_change() callback being called when the SYN_SENT state is set. However the networking layer doesn't actually call us back in that case. Signed-off-by: Trond Myklebust Cc: stable@kernel.org --- net/sunrpc/xprtsock.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index bf005d3c65ef..f34f5ab341a3 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -1344,7 +1344,6 @@ static void xs_tcp_state_change(struct sock *sk) case TCP_CLOSE_WAIT: /* The server initiated a shutdown of the socket */ xprt_force_disconnect(xprt); - case TCP_SYN_SENT: xprt->connect_cookie++; case TCP_CLOSING: /* @@ -1758,6 +1757,7 @@ static void xs_tcp_reuse_connection(struct sock_xprt *transport) static int xs_tcp_finish_connecting(struct rpc_xprt *xprt, struct socket *sock) { struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt); + int ret = -ENOTCONN; if (!transport->inet) { struct sock *sk = sock->sk; @@ -1789,12 +1789,22 @@ static int xs_tcp_finish_connecting(struct rpc_xprt *xprt, struct socket *sock) } if (!xprt_bound(xprt)) - return -ENOTCONN; + goto out; /* Tell the socket layer to start connecting... */ xprt->stat.connect_count++; xprt->stat.connect_start = jiffies; - return kernel_connect(sock, xs_addr(xprt), xprt->addrlen, O_NONBLOCK); + ret = kernel_connect(sock, xs_addr(xprt), xprt->addrlen, O_NONBLOCK); + switch (ret) { + case 0: + case -EINPROGRESS: + /* SYN_SENT! */ + xprt->connect_cookie++; + if (xprt->reestablish_timeout < XS_TCP_INIT_REEST_TO) + xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO; + } +out: + return ret; } /** -- cgit v1.2.3 From 0ced63d1a245ac11241a5d37932e6d04d9c8040d Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 26 May 2011 14:26:35 -0400 Subject: NFSv4: Handle expired stateids when the lease is still valid Currently, if the server returns NFS4ERR_EXPIRED in reply to a READ or WRITE, but the RENEW test determines that the lease is still active, we fail to recover and end up looping forever in a READ/WRITE + RENEW death spiral. Signed-off-by: Trond Myklebust Cc: stable@kernel.org --- fs/nfs/nfs4proc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index cf1b339c3937..d0e15dba7a5a 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -267,9 +267,11 @@ static int nfs4_handle_exception(struct nfs_server *server, int errorcode, struc break; nfs4_schedule_stateid_recovery(server, state); goto wait_on_recovery; + case -NFS4ERR_EXPIRED: + if (state != NULL) + nfs4_schedule_stateid_recovery(server, state); case -NFS4ERR_STALE_STATEID: case -NFS4ERR_STALE_CLIENTID: - case -NFS4ERR_EXPIRED: nfs4_schedule_lease_recovery(clp); goto wait_on_recovery; #if defined(CONFIG_NFS_V4_1) @@ -3670,9 +3672,11 @@ nfs4_async_handle_error(struct rpc_task *task, const struct nfs_server *server, break; nfs4_schedule_stateid_recovery(server, state); goto wait_on_recovery; + case -NFS4ERR_EXPIRED: + if (state != NULL) + nfs4_schedule_stateid_recovery(server, state); case -NFS4ERR_STALE_STATEID: case -NFS4ERR_STALE_CLIENTID: - case -NFS4ERR_EXPIRED: nfs4_schedule_lease_recovery(clp); goto wait_on_recovery; #if defined(CONFIG_NFS_V4_1) @@ -4543,6 +4547,7 @@ int nfs4_lock_delegation_recall(struct nfs4_state *state, struct file_lock *fl) case -ESTALE: goto out; case -NFS4ERR_EXPIRED: + nfs4_schedule_stateid_recovery(server, state); case -NFS4ERR_STALE_CLIENTID: case -NFS4ERR_STALE_STATEID: nfs4_schedule_lease_recovery(server->nfs_client); -- cgit v1.2.3 From 444f72fe7e7b5f4db34cee933fa3546ebb8e9122 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 26 May 2011 14:26:35 -0400 Subject: NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors Currently, the call to nfs4_schedule_session_recovery() will actually just result in a test of the lease when what we really want is to force a session reset. Signed-off-by: Trond Myklebust Cc: stable@kernel.org --- fs/nfs/nfs4state.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 036f5adc9e1f..e97dd219f84f 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1466,7 +1466,10 @@ static int nfs4_reclaim_lease(struct nfs_client *clp) #ifdef CONFIG_NFS_V4_1 void nfs4_schedule_session_recovery(struct nfs4_session *session) { - nfs4_schedule_lease_recovery(session->clp); + struct nfs_client *clp = session->clp; + + set_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state); + nfs4_schedule_lease_recovery(clp); } EXPORT_SYMBOL_GPL(nfs4_schedule_session_recovery); @@ -1549,6 +1552,7 @@ static int nfs4_reset_session(struct nfs_client *clp) status = nfs4_recovery_handle_error(clp, status); goto out; } + clear_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state); /* create_session negotiated new slot table */ clear_bit(NFS4CLNT_RECALL_SLOT, &clp->cl_state); -- cgit v1.2.3 From 60c16ea877546e559988a8b1e4f4256afbbd83e6 Mon Sep 17 00:00:00 2001 From: Harshula Jayasuriya Date: Mon, 23 May 2011 22:52:11 +1000 Subject: NFS: nfs_update_inode: print current and new inode size in debug output Hi Trond, In nfs_update_inode debug output, print the current and new inode size when the file size changes on the NFS server. Signed-off-by: Harshula Jayasuriya Reviewed-by: Jeff Layton Signed-off-by: Trond Myklebust --- fs/nfs/inode.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 57bb31ad7a5e..873c6fa8bc3b 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -1298,8 +1298,12 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) i_size_write(inode, new_isize); invalid |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA; } - dprintk("NFS: isize change on server for file %s/%ld\n", - inode->i_sb->s_id, inode->i_ino); + dprintk("NFS: isize change on server for file %s/%ld " + "(%Ld to %Ld)\n", + inode->i_sb->s_id, + inode->i_ino, + (long long)cur_isize, + (long long)new_isize); } } else invalid |= save_cache_validity & (NFS_INO_INVALID_ATTR -- cgit v1.2.3 From 4b8ee2b82e8b0b6e17ee33feb74fcdb5c6d8dbdd Mon Sep 17 00:00:00 2001 From: Vitaliy Gusev Date: Fri, 20 May 2011 01:34:46 +0400 Subject: nfs41: Correct offset for LAYOUTCOMMIT A client sends offset to MDS as it was seen by DS. As result, file size after copy is only half of original file size in case of 2 DS. Signed-off-by: Vitaliy Gusev Cc: stable@kernel.org [2.6.39] Signed-off-by: Trond Myklebust --- fs/nfs/pnfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index f57f5281a520..101c85a3644e 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1009,7 +1009,7 @@ void pnfs_set_layoutcommit(struct nfs_write_data *wdata) { struct nfs_inode *nfsi = NFS_I(wdata->inode); - loff_t end_pos = wdata->args.offset + wdata->res.count; + loff_t end_pos = wdata->mds_offset + wdata->res.count; bool mark_as_dirty = false; spin_lock(&nfsi->vfs_inode.i_lock); -- cgit v1.2.3 From 26f04dde681c6a48b2bacfc5fe01fef204419b0c Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Sun, 1 May 2011 06:21:54 -0700 Subject: nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu() The rcu callback nfs_free_delegation_callback() just calls a kfree(), so we use kfree_rcu() instead of the call_rcu(nfs_free_delegation_callback). Signed-off-by: Lai Jiangshan Signed-off-by: Paul E. McKenney Cc: Trond Myklebust Signed-off-by: Trond Myklebust --- fs/nfs/delegation.c | 14 +------------- 1 file changed, 1 insertion(+), 13 deletions(-) diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c index bbbc6bf5cb2e..dd25c2aec375 100644 --- a/fs/nfs/delegation.c +++ b/fs/nfs/delegation.c @@ -21,25 +21,13 @@ #include "delegation.h" #include "internal.h" -static void nfs_do_free_delegation(struct nfs_delegation *delegation) -{ - kfree(delegation); -} - -static void nfs_free_delegation_callback(struct rcu_head *head) -{ - struct nfs_delegation *delegation = container_of(head, struct nfs_delegation, rcu); - - nfs_do_free_delegation(delegation); -} - static void nfs_free_delegation(struct nfs_delegation *delegation) { if (delegation->cred) { put_rpccred(delegation->cred); delegation->cred = NULL; } - call_rcu(&delegation->rcu, nfs_free_delegation_callback); + kfree_rcu(delegation, rcu); } /** -- cgit v1.2.3 From 61677eeec29e87edc03a1061ae0a04b92507450d Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 9 May 2011 15:22:34 -0400 Subject: SUNRPC: Rename xs_encode_tcp_fragment_header() Clean up: Use a more generic name for xs_encode_tcp_fragment_header(); it's appropriate to use for all stream transport types. We're about to add new stream transport. Also, move it to a place where it is more easily shared amongst the various send_request methods. And finally, replace the "htonl" macro invocation with its modern equivalent. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/xprtsock.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index f34f5ab341a3..079366974e1f 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -495,6 +495,16 @@ static int xs_nospace(struct rpc_task *task) return ret; } +/* + * Construct a stream transport record marker in @buf. + */ +static inline void xs_encode_stream_record_marker(struct xdr_buf *buf) +{ + u32 reclen = buf->len - sizeof(rpc_fraghdr); + rpc_fraghdr *base = buf->head[0].iov_base; + *base = cpu_to_be32(RPC_LAST_STREAM_FRAGMENT | reclen); +} + /** * xs_udp_send_request - write an RPC request to a UDP socket * @task: address of RPC task that manages the state of an RPC request @@ -574,13 +584,6 @@ static void xs_tcp_shutdown(struct rpc_xprt *xprt) kernel_sock_shutdown(sock, SHUT_WR); } -static inline void xs_encode_tcp_record_marker(struct xdr_buf *buf) -{ - u32 reclen = buf->len - sizeof(rpc_fraghdr); - rpc_fraghdr *base = buf->head[0].iov_base; - *base = htonl(RPC_LAST_STREAM_FRAGMENT | reclen); -} - /** * xs_tcp_send_request - write an RPC request to a TCP socket * @task: address of RPC task that manages the state of an RPC request @@ -603,7 +606,7 @@ static int xs_tcp_send_request(struct rpc_task *task) struct xdr_buf *xdr = &req->rq_snd_buf; int status; - xs_encode_tcp_record_marker(&req->rq_snd_buf); + xs_encode_stream_record_marker(&req->rq_snd_buf); xs_pktdump("packet data:", req->rq_svec->iov_base, @@ -2024,10 +2027,7 @@ static int bc_sendto(struct rpc_rqst *req) unsigned long headoff; unsigned long tailoff; - /* - * Set up the rpc header and record marker stuff - */ - xs_encode_tcp_record_marker(xbufp); + xs_encode_stream_record_marker(xbufp); tailoff = (unsigned long)xbufp->tail[0].iov_base & ~PAGE_MASK; headoff = (unsigned long)xbufp->head[0].iov_base & ~PAGE_MASK; -- cgit v1.2.3 From 4251c94833aa516c1fc7a0f8f504a26eadd4b91e Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 9 May 2011 15:22:15 -0400 Subject: NFS: Revert NFSROOT default mount options Marek Belisko reports that recent attempts to fix regressions in NFSROOT have broken his configuration: > After update from 2.6.38-rc8 to 2.6.38 is mounting rootfs over nfs not possible. > Log: > VFS: Mounted root (nfs filesystem) on device 0:14. > Freeing init memory: 132K > nfs: server 10.146.1.21 not responding, still trying > nfs: server 10.146.1.21 not responding, still trying > > This is never ending. I make short bisect (not too much commits > between versions) > and bad commit was reported: 53d4737580535e073963b91ce87d4216e434fab5 > > NFS: NFSROOT should default to "proto=udp" > > I've tested on mini2440 board (DM9000, static IP). > Is there some missing option or something else to be checked? An examination of a network trace captured during the failure shows that the mount is actually succeeding, but that the client is not seeing READ replies larger than 16KB. This could be a local packet filtering issue on the client, but we didn't troubleshoot this further because of the reported "git bisect" result. Last fall we removed the ad hoc mount option parser in fs/nfs/nfsroot.c in favor of using the main parser in fs/nfs/super.c (see commit 56463e50 "NFS: Use super.c for NFSROOT mount option parsing"). That commit changed the default NFSROOT mount options to be the same as those employed by user space mounts. As it turns out, these new default mount options are not tolerated by many embedded systems. So far these problems have been due to specific behavior of certain embedded NICs. The NFS community does not have such hardware on hand for running tests. Commit 53d47375 recently introduced a clean way to specify default mount options for NFSROOT, so we can now easily restore the traditional defaults for NFSROOT: vers=2,udp,rsize=4096,wsize=4096 This should revert the new default NFSROOT mount options introduced with commit 56463e50. Tested-by: Marek Belisto Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- fs/nfs/nfsroot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfsroot.c b/fs/nfs/nfsroot.c index c541093a5bf2..c4744e1d513c 100644 --- a/fs/nfs/nfsroot.c +++ b/fs/nfs/nfsroot.c @@ -87,7 +87,7 @@ #define NFS_ROOT "/tftpboot/%s" /* Default NFSROOT mount options. */ -#define NFS_DEF_OPTIONS "udp" +#define NFS_DEF_OPTIONS "vers=2,udp,rsize=4096,wsize=4096" /* Parameters passed from the kernel command line */ static char nfs_root_parms[256] __initdata = ""; -- cgit v1.2.3 From da09eb93033e7204cb3e3f3140b46cf108c42c8f Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 9 May 2011 15:22:25 -0400 Subject: SUNRPC: Clean up use of curly braces in switch cases Clean up. Preferred style is not to use curly braces around switch cases. I'm about to add another case that needs a third type cast. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 8d83f9d48713..b91f8f943c5e 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -298,22 +298,21 @@ struct rpc_clnt *rpc_create(struct rpc_create_args *args) * up a string representation of the passed-in address. */ if (args->servername == NULL) { + struct sockaddr_in *sin = + (struct sockaddr_in *)args->address; + struct sockaddr_in6 *sin6 = + (struct sockaddr_in6 *)args->address; + servername[0] = '\0'; switch (args->address->sa_family) { - case AF_INET: { - struct sockaddr_in *sin = - (struct sockaddr_in *)args->address; + case AF_INET: snprintf(servername, sizeof(servername), "%pI4", &sin->sin_addr.s_addr); break; - } - case AF_INET6: { - struct sockaddr_in6 *sin = - (struct sockaddr_in6 *)args->address; + case AF_INET6: snprintf(servername, sizeof(servername), "%pI6", - &sin->sin6_addr); + &sin6->sin6_addr); break; - } default: /* caller wants default server name, but * address family isn't recognized. */ -- cgit v1.2.3 From 7402ab19cdd5943c7dd4f3399afe3abda8077ef5 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 9 May 2011 15:22:55 -0400 Subject: SUNRPC: Use AF_LOCAL for rpcbind upcalls As libtirpc does in user space, have our registration API try using an AF_LOCAL transport first when registering and unregistering. This means we don't chew up privileged ports, and our registration is bound to an "owner" (the effective uid of the process on the sending end of the transport). Only that "owner" may unregister the service. The kernel could probe rpcbind via an rpcbind query to determine whether rpcbind has an AF_LOCAL service. For simplicity, we use the same technique that libtirpc uses: simply fail over to network loopback if creating an AF_LOCAL transport to the well-known rpcbind service socket fails. This means we open-code the pathname of the rpcbind socket in the kernel. For now we have to do that anyway because the kernel's RPC over AF_LOCAL implementation does not support autobind. That may be undesirable in the long term. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/rpcb_clnt.c | 97 ++++++++++++++++++++++++++++++++++++++++++-------- net/sunrpc/svc.c | 2 ++ 2 files changed, 85 insertions(+), 14 deletions(-) diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c index c652e4cc9fe9..9a80a922c527 100644 --- a/net/sunrpc/rpcb_clnt.c +++ b/net/sunrpc/rpcb_clnt.c @@ -16,6 +16,7 @@ #include #include +#include #include #include #include @@ -32,6 +33,8 @@ # define RPCDBG_FACILITY RPCDBG_BIND #endif +#define RPCBIND_SOCK_PATHNAME "/var/run/rpcbind.sock" + #define RPCBIND_PROGRAM (100000u) #define RPCBIND_PORT (111u) @@ -158,20 +161,69 @@ static void rpcb_map_release(void *data) kfree(map); } -static const struct sockaddr_in rpcb_inaddr_loopback = { - .sin_family = AF_INET, - .sin_addr.s_addr = htonl(INADDR_LOOPBACK), - .sin_port = htons(RPCBIND_PORT), -}; +/* + * Returns zero on success, otherwise a negative errno value + * is returned. + */ +static int rpcb_create_local_unix(void) +{ + static const struct sockaddr_un rpcb_localaddr_rpcbind = { + .sun_family = AF_LOCAL, + .sun_path = RPCBIND_SOCK_PATHNAME, + }; + struct rpc_create_args args = { + .net = &init_net, + .protocol = XPRT_TRANSPORT_LOCAL, + .address = (struct sockaddr *)&rpcb_localaddr_rpcbind, + .addrsize = sizeof(rpcb_localaddr_rpcbind), + .servername = "localhost", + .program = &rpcb_program, + .version = RPCBVERS_2, + .authflavor = RPC_AUTH_NULL, + }; + struct rpc_clnt *clnt, *clnt4; + int result = 0; + + /* + * Because we requested an RPC PING at transport creation time, + * this works only if the user space portmapper is rpcbind, and + * it's listening on AF_LOCAL on the named socket. + */ + clnt = rpc_create(&args); + if (IS_ERR(clnt)) { + dprintk("RPC: failed to create AF_LOCAL rpcbind " + "client (errno %ld).\n", PTR_ERR(clnt)); + result = -PTR_ERR(clnt); + goto out; + } + + clnt4 = rpc_bind_new_program(clnt, &rpcb_program, RPCBVERS_4); + if (IS_ERR(clnt4)) { + dprintk("RPC: failed to bind second program to " + "rpcbind v4 client (errno %ld).\n", + PTR_ERR(clnt4)); + clnt4 = NULL; + } + + /* Protected by rpcb_create_local_mutex */ + rpcb_local_clnt = clnt; + rpcb_local_clnt4 = clnt4; -static DEFINE_MUTEX(rpcb_create_local_mutex); +out: + return result; +} /* * Returns zero on success, otherwise a negative errno value * is returned. */ -static int rpcb_create_local(void) +static int rpcb_create_local_net(void) { + static const struct sockaddr_in rpcb_inaddr_loopback = { + .sin_family = AF_INET, + .sin_addr.s_addr = htonl(INADDR_LOOPBACK), + .sin_port = htons(RPCBIND_PORT), + }; struct rpc_create_args args = { .net = &init_net, .protocol = XPRT_TRANSPORT_TCP, @@ -186,13 +238,6 @@ static int rpcb_create_local(void) struct rpc_clnt *clnt, *clnt4; int result = 0; - if (rpcb_local_clnt) - return result; - - mutex_lock(&rpcb_create_local_mutex); - if (rpcb_local_clnt) - goto out; - clnt = rpc_create(&args); if (IS_ERR(clnt)) { dprintk("RPC: failed to create local rpcbind " @@ -214,9 +259,33 @@ static int rpcb_create_local(void) clnt4 = NULL; } + /* Protected by rpcb_create_local_mutex */ rpcb_local_clnt = clnt; rpcb_local_clnt4 = clnt4; +out: + return result; +} + +/* + * Returns zero on success, otherwise a negative errno value + * is returned. + */ +static int rpcb_create_local(void) +{ + static DEFINE_MUTEX(rpcb_create_local_mutex); + int result = 0; + + if (rpcb_local_clnt) + return result; + + mutex_lock(&rpcb_create_local_mutex); + if (rpcb_local_clnt) + goto out; + + if (rpcb_create_local_unix() != 0) + result = rpcb_create_local_net(); + out: mutex_unlock(&rpcb_create_local_mutex); return result; diff --git a/net/sunrpc/svc.c b/net/sunrpc/svc.c index 08e05a8ce025..2b90292e9505 100644 --- a/net/sunrpc/svc.c +++ b/net/sunrpc/svc.c @@ -942,6 +942,8 @@ static void svc_unregister(const struct svc_serv *serv) if (progp->pg_vers[i]->vs_hidden) continue; + dprintk("svc: attempting to unregister %sv%u\n", + progp->pg_name, i); __svc_unregister(progp->pg_prog, i, progp->pg_name); } } -- cgit v1.2.3 From 559649efb9b0d248541933197bdf7b75529da457 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 9 May 2011 15:23:04 -0400 Subject: SUNRPC: Remove obsolete comment Clean up. The documenting comment at the top of net/sunrpc/clnt.c is out of date. We adopted BSD's RTO estimation mechanism years ago. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index b91f8f943c5e..08ed49629b86 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -13,10 +13,6 @@ * and need to be refreshed, or when a packet was damaged in transit. * This may be have to be moved to the VFS layer. * - * NB: BSD uses a more intelligent approach to guessing when a request - * or reply has been lost by keeping the RTO estimate for each procedure. - * We currently make do with a constant timeout value. - * * Copyright (C) 1992,1993 Rick Sladkey * Copyright (C) 1995,1996 Olaf Kirch */ -- cgit v1.2.3 From 176e21ee2ec89cae8d45cf1a850ea45a45428fb8 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 9 May 2011 15:22:44 -0400 Subject: SUNRPC: Support for RPC over AF_LOCAL transports TI-RPC introduces the capability of performing RPC over AF_LOCAL sockets. It uses this mainly for registering and unregistering local RPC services securely with the local rpcbind, but we could also conceivably use it as a generic upcall mechanism. This patch provides a client-side only implementation for the moment. We might also consider a server-side implementation to provide AF_LOCAL access to NLM (for statd downcalls, and such like). Autobinding is not supported on kernel AF_LOCAL transports at this time. Kernel ULPs must specify the pathname of the remote endpoint when an AF_LOCAL transport is created. rpcbind supports registering services available via AF_LOCAL, so the kernel could handle it with some adjustment to ->rpcbind and ->set_port. But we don't need this feature for doing upcalls via well-known named sockets. This has not been tested with ULPs that move a substantial amount of data. Thus, I can't attest to how robust the write_space and congestion management logic is. Signed-off-by: Chuck Lever Signed-off-by: Trond Myklebust --- include/linux/sunrpc/msg_prot.h | 1 + include/linux/sunrpc/xprt.h | 3 +- net/sunrpc/clnt.c | 8 + net/sunrpc/xprtsock.c | 395 +++++++++++++++++++++++++++++++++++++++- 4 files changed, 403 insertions(+), 4 deletions(-) diff --git a/include/linux/sunrpc/msg_prot.h b/include/linux/sunrpc/msg_prot.h index 77e624883393..c68a147939a6 100644 --- a/include/linux/sunrpc/msg_prot.h +++ b/include/linux/sunrpc/msg_prot.h @@ -145,6 +145,7 @@ typedef __be32 rpc_fraghdr; #define RPCBIND_NETID_TCP "tcp" #define RPCBIND_NETID_UDP6 "udp6" #define RPCBIND_NETID_TCP6 "tcp6" +#define RPCBIND_NETID_LOCAL "local" /* * Note that RFC 1833 does not put any size restrictions on the diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index a0f998c07c65..81cce3b3ee66 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -141,7 +141,8 @@ enum xprt_transports { XPRT_TRANSPORT_UDP = IPPROTO_UDP, XPRT_TRANSPORT_TCP = IPPROTO_TCP, XPRT_TRANSPORT_BC_TCP = IPPROTO_TCP | XPRT_TRANSPORT_BC, - XPRT_TRANSPORT_RDMA = 256 + XPRT_TRANSPORT_RDMA = 256, + XPRT_TRANSPORT_LOCAL = 257, }; struct rpc_xprt { diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 08ed49629b86..b84d7395535e 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -28,7 +28,9 @@ #include #include #include +#include #include +#include #include #include @@ -294,6 +296,8 @@ struct rpc_clnt *rpc_create(struct rpc_create_args *args) * up a string representation of the passed-in address. */ if (args->servername == NULL) { + struct sockaddr_un *sun = + (struct sockaddr_un *)args->address; struct sockaddr_in *sin = (struct sockaddr_in *)args->address; struct sockaddr_in6 *sin6 = @@ -301,6 +305,10 @@ struct rpc_clnt *rpc_create(struct rpc_create_args *args) servername[0] = '\0'; switch (args->address->sa_family) { + case AF_LOCAL: + snprintf(servername, sizeof(servername), "%s", + sun->sun_path); + break; case AF_INET: snprintf(servername, sizeof(servername), "%pI4", &sin->sin_addr.s_addr); diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 079366974e1f..72abb7358933 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -19,6 +19,7 @@ */ #include +#include #include #include #include @@ -28,6 +29,7 @@ #include #include #include +#include #include #include #include @@ -45,6 +47,9 @@ #include #include "sunrpc.h" + +static void xs_close(struct rpc_xprt *xprt); + /* * xprtsock tunables */ @@ -261,6 +266,11 @@ static inline struct sockaddr *xs_addr(struct rpc_xprt *xprt) return (struct sockaddr *) &xprt->addr; } +static inline struct sockaddr_un *xs_addr_un(struct rpc_xprt *xprt) +{ + return (struct sockaddr_un *) &xprt->addr; +} + static inline struct sockaddr_in *xs_addr_in(struct rpc_xprt *xprt) { return (struct sockaddr_in *) &xprt->addr; @@ -276,23 +286,34 @@ static void xs_format_common_peer_addresses(struct rpc_xprt *xprt) struct sockaddr *sap = xs_addr(xprt); struct sockaddr_in6 *sin6; struct sockaddr_in *sin; + struct sockaddr_un *sun; char buf[128]; - (void)rpc_ntop(sap, buf, sizeof(buf)); - xprt->address_strings[RPC_DISPLAY_ADDR] = kstrdup(buf, GFP_KERNEL); - switch (sap->sa_family) { + case AF_LOCAL: + sun = xs_addr_un(xprt); + strlcpy(buf, sun->sun_path, sizeof(buf)); + xprt->address_strings[RPC_DISPLAY_ADDR] = + kstrdup(buf, GFP_KERNEL); + break; case AF_INET: + (void)rpc_ntop(sap, buf, sizeof(buf)); + xprt->address_strings[RPC_DISPLAY_ADDR] = + kstrdup(buf, GFP_KERNEL); sin = xs_addr_in(xprt); snprintf(buf, sizeof(buf), "%08x", ntohl(sin->sin_addr.s_addr)); break; case AF_INET6: + (void)rpc_ntop(sap, buf, sizeof(buf)); + xprt->address_strings[RPC_DISPLAY_ADDR] = + kstrdup(buf, GFP_KERNEL); sin6 = xs_addr_in6(xprt); snprintf(buf, sizeof(buf), "%pi6", &sin6->sin6_addr); break; default: BUG(); } + xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL); } @@ -505,6 +526,60 @@ static inline void xs_encode_stream_record_marker(struct xdr_buf *buf) *base = cpu_to_be32(RPC_LAST_STREAM_FRAGMENT | reclen); } +/** + * xs_local_send_request - write an RPC request to an AF_LOCAL socket + * @task: RPC task that manages the state of an RPC request + * + * Return values: + * 0: The request has been sent + * EAGAIN: The socket was blocked, please call again later to + * complete the request + * ENOTCONN: Caller needs to invoke connect logic then call again + * other: Some other error occured, the request was not sent + */ +static int xs_local_send_request(struct rpc_task *task) +{ + struct rpc_rqst *req = task->tk_rqstp; + struct rpc_xprt *xprt = req->rq_xprt; + struct sock_xprt *transport = + container_of(xprt, struct sock_xprt, xprt); + struct xdr_buf *xdr = &req->rq_snd_buf; + int status; + + xs_encode_stream_record_marker(&req->rq_snd_buf); + + xs_pktdump("packet data:", + req->rq_svec->iov_base, req->rq_svec->iov_len); + + status = xs_sendpages(transport->sock, NULL, 0, + xdr, req->rq_bytes_sent); + dprintk("RPC: %s(%u) = %d\n", + __func__, xdr->len - req->rq_bytes_sent, status); + if (likely(status >= 0)) { + req->rq_bytes_sent += status; + req->rq_xmit_bytes_sent += status; + if (likely(req->rq_bytes_sent >= req->rq_slen)) { + req->rq_bytes_sent = 0; + return 0; + } + status = -EAGAIN; + } + + switch (status) { + case -EAGAIN: + status = xs_nospace(task); + break; + default: + dprintk("RPC: sendmsg returned unrecognized error %d\n", + -status); + case -EPIPE: + xs_close(xprt); + status = -ENOTCONN; + } + + return status; +} + /** * xs_udp_send_request - write an RPC request to a UDP socket * @task: address of RPC task that manages the state of an RPC request @@ -788,6 +863,88 @@ static inline struct rpc_xprt *xprt_from_sock(struct sock *sk) return (struct rpc_xprt *) sk->sk_user_data; } +static int xs_local_copy_to_xdr(struct xdr_buf *xdr, struct sk_buff *skb) +{ + struct xdr_skb_reader desc = { + .skb = skb, + .offset = sizeof(rpc_fraghdr), + .count = skb->len - sizeof(rpc_fraghdr), + }; + + if (xdr_partial_copy_from_skb(xdr, 0, &desc, xdr_skb_read_bits) < 0) + return -1; + if (desc.count) + return -1; + return 0; +} + +/** + * xs_local_data_ready - "data ready" callback for AF_LOCAL sockets + * @sk: socket with data to read + * @len: how much data to read + * + * Currently this assumes we can read the whole reply in a single gulp. + */ +static void xs_local_data_ready(struct sock *sk, int len) +{ + struct rpc_task *task; + struct rpc_xprt *xprt; + struct rpc_rqst *rovr; + struct sk_buff *skb; + int err, repsize, copied; + u32 _xid; + __be32 *xp; + + read_lock_bh(&sk->sk_callback_lock); + dprintk("RPC: %s...\n", __func__); + xprt = xprt_from_sock(sk); + if (xprt == NULL) + goto out; + + skb = skb_recv_datagram(sk, 0, 1, &err); + if (skb == NULL) + goto out; + + if (xprt->shutdown) + goto dropit; + + repsize = skb->len - sizeof(rpc_fraghdr); + if (repsize < 4) { + dprintk("RPC: impossible RPC reply size %d\n", repsize); + goto dropit; + } + + /* Copy the XID from the skb... */ + xp = skb_header_pointer(skb, sizeof(rpc_fraghdr), sizeof(_xid), &_xid); + if (xp == NULL) + goto dropit; + + /* Look up and lock the request corresponding to the given XID */ + spin_lock(&xprt->transport_lock); + rovr = xprt_lookup_rqst(xprt, *xp); + if (!rovr) + goto out_unlock; + task = rovr->rq_task; + + copied = rovr->rq_private_buf.buflen; + if (copied > repsize) + copied = repsize; + + if (xs_local_copy_to_xdr(&rovr->rq_private_buf, skb)) { + dprintk("RPC: sk_buff copy failed\n"); + goto out_unlock; + } + + xprt_complete_rqst(task, copied); + + out_unlock: + spin_unlock(&xprt->transport_lock); + dropit: + skb_free_datagram(sk, skb); + out: + read_unlock_bh(&sk->sk_callback_lock); +} + /** * xs_udp_data_ready - "data ready" callback for UDP sockets * @sk: socket with data to read @@ -1573,11 +1730,31 @@ static int xs_bind(struct sock_xprt *transport, struct socket *sock) return err; } +/* + * We don't support autobind on AF_LOCAL sockets + */ +static void xs_local_rpcbind(struct rpc_task *task) +{ + xprt_set_bound(task->tk_xprt); +} + +static void xs_local_set_port(struct rpc_xprt *xprt, unsigned short port) +{ +} #ifdef CONFIG_DEBUG_LOCK_ALLOC static struct lock_class_key xs_key[2]; static struct lock_class_key xs_slock_key[2]; +static inline void xs_reclassify_socketu(struct socket *sock) +{ + struct sock *sk = sock->sk; + + BUG_ON(sock_owned_by_user(sk)); + sock_lock_init_class_and_name(sk, "slock-AF_LOCAL-RPC", + &xs_slock_key[1], "sk_lock-AF_LOCAL-RPC", &xs_key[1]); +} + static inline void xs_reclassify_socket4(struct socket *sock) { struct sock *sk = sock->sk; @@ -1599,6 +1776,9 @@ static inline void xs_reclassify_socket6(struct socket *sock) static inline void xs_reclassify_socket(int family, struct socket *sock) { switch (family) { + case AF_LOCAL: + xs_reclassify_socketu(sock); + break; case AF_INET: xs_reclassify_socket4(sock); break; @@ -1608,6 +1788,10 @@ static inline void xs_reclassify_socket(int family, struct socket *sock) } } #else +static inline void xs_reclassify_socketu(struct socket *sock) +{ +} + static inline void xs_reclassify_socket4(struct socket *sock) { } @@ -1646,6 +1830,94 @@ out: return ERR_PTR(err); } +static int xs_local_finish_connecting(struct rpc_xprt *xprt, + struct socket *sock) +{ + struct sock_xprt *transport = container_of(xprt, struct sock_xprt, + xprt); + + if (!transport->inet) { + struct sock *sk = sock->sk; + + write_lock_bh(&sk->sk_callback_lock); + + xs_save_old_callbacks(transport, sk); + + sk->sk_user_data = xprt; + sk->sk_data_ready = xs_local_data_ready; + sk->sk_write_space = xs_udp_write_space; + sk->sk_error_report = xs_error_report; + sk->sk_allocation = GFP_ATOMIC; + + xprt_clear_connected(xprt); + + /* Reset to new socket */ + transport->sock = sock; + transport->inet = sk; + + write_unlock_bh(&sk->sk_callback_lock); + } + + /* Tell the socket layer to start connecting... */ + xprt->stat.connect_count++; + xprt->stat.connect_start = jiffies; + return kernel_connect(sock, xs_addr(xprt), xprt->addrlen, 0); +} + +/** + * xs_local_setup_socket - create AF_LOCAL socket, connect to a local endpoint + * @xprt: RPC transport to connect + * @transport: socket transport to connect + * @create_sock: function to create a socket of the correct type + * + * Invoked by a work queue tasklet. + */ +static void xs_local_setup_socket(struct work_struct *work) +{ + struct sock_xprt *transport = + container_of(work, struct sock_xprt, connect_worker.work); + struct rpc_xprt *xprt = &transport->xprt; + struct socket *sock; + int status = -EIO; + + if (xprt->shutdown) + goto out; + + clear_bit(XPRT_CONNECTION_ABORT, &xprt->state); + status = __sock_create(xprt->xprt_net, AF_LOCAL, + SOCK_STREAM, 0, &sock, 1); + if (status < 0) { + dprintk("RPC: can't create AF_LOCAL " + "transport socket (%d).\n", -status); + goto out; + } + xs_reclassify_socketu(sock); + + dprintk("RPC: worker connecting xprt %p via AF_LOCAL to %s\n", + xprt, xprt->address_strings[RPC_DISPLAY_ADDR]); + + status = xs_local_finish_connecting(xprt, sock); + switch (status) { + case 0: + dprintk("RPC: xprt %p connected to %s\n", + xprt, xprt->address_strings[RPC_DISPLAY_ADDR]); + xprt_set_connected(xprt); + break; + case -ENOENT: + dprintk("RPC: xprt %p: socket %s does not exist\n", + xprt, xprt->address_strings[RPC_DISPLAY_ADDR]); + break; + default: + printk(KERN_ERR "%s: unhandled error (%d) connecting to %s\n", + __func__, -status, + xprt->address_strings[RPC_DISPLAY_ADDR]); + } + +out: + xprt_clear_connecting(xprt); + xprt_wake_pending_tasks(xprt, status); +} + static void xs_udp_finish_connecting(struct rpc_xprt *xprt, struct socket *sock) { struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt); @@ -1929,6 +2201,32 @@ static void xs_connect(struct rpc_task *task) } } +/** + * xs_local_print_stats - display AF_LOCAL socket-specifc stats + * @xprt: rpc_xprt struct containing statistics + * @seq: output file + * + */ +static void xs_local_print_stats(struct rpc_xprt *xprt, struct seq_file *seq) +{ + long idle_time = 0; + + if (xprt_connected(xprt)) + idle_time = (long)(jiffies - xprt->last_used) / HZ; + + seq_printf(seq, "\txprt:\tlocal %lu %lu %lu %ld %lu %lu %lu " + "%llu %llu\n", + xprt->stat.bind_count, + xprt->stat.connect_count, + xprt->stat.connect_time, + idle_time, + xprt->stat.sends, + xprt->stat.recvs, + xprt->stat.bad_xids, + xprt->stat.req_u, + xprt->stat.bklog_u); +} + /** * xs_udp_print_stats - display UDP socket-specifc stats * @xprt: rpc_xprt struct containing statistics @@ -2099,6 +2397,21 @@ static void bc_destroy(struct rpc_xprt *xprt) { } +static struct rpc_xprt_ops xs_local_ops = { + .reserve_xprt = xprt_reserve_xprt, + .release_xprt = xs_tcp_release_xprt, + .rpcbind = xs_local_rpcbind, + .set_port = xs_local_set_port, + .connect = xs_connect, + .buf_alloc = rpc_malloc, + .buf_free = rpc_free, + .send_request = xs_local_send_request, + .set_retrans_timeout = xprt_set_retrans_timeout_def, + .close = xs_close, + .destroy = xs_destroy, + .print_stats = xs_local_print_stats, +}; + static struct rpc_xprt_ops xs_udp_ops = { .set_buffer_size = xs_udp_set_buffer_size, .reserve_xprt = xprt_reserve_xprt_cong, @@ -2160,6 +2473,8 @@ static int xs_init_anyaddr(const int family, struct sockaddr *sap) }; switch (family) { + case AF_LOCAL: + break; case AF_INET: memcpy(sap, &sin, sizeof(sin)); break; @@ -2207,6 +2522,70 @@ static struct rpc_xprt *xs_setup_xprt(struct xprt_create *args, return xprt; } +static const struct rpc_timeout xs_local_default_timeout = { + .to_initval = 10 * HZ, + .to_maxval = 10 * HZ, + .to_retries = 2, +}; + +/** + * xs_setup_local - Set up transport to use an AF_LOCAL socket + * @args: rpc transport creation arguments + * + * AF_LOCAL is a "tpi_cots_ord" transport, just like TCP + */ +static struct rpc_xprt *xs_setup_local(struct xprt_create *args) +{ + struct sockaddr_un *sun = (struct sockaddr_un *)args->dstaddr; + struct sock_xprt *transport; + struct rpc_xprt *xprt; + struct rpc_xprt *ret; + + xprt = xs_setup_xprt(args, xprt_tcp_slot_table_entries); + if (IS_ERR(xprt)) + return xprt; + transport = container_of(xprt, struct sock_xprt, xprt); + + xprt->prot = 0; + xprt->tsh_size = sizeof(rpc_fraghdr) / sizeof(u32); + xprt->max_payload = RPC_MAX_FRAGMENT_SIZE; + + xprt->bind_timeout = XS_BIND_TO; + xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO; + xprt->idle_timeout = XS_IDLE_DISC_TO; + + xprt->ops = &xs_local_ops; + xprt->timeout = &xs_local_default_timeout; + + switch (sun->sun_family) { + case AF_LOCAL: + if (sun->sun_path[0] != '/') { + dprintk("RPC: bad AF_LOCAL address: %s\n", + sun->sun_path); + ret = ERR_PTR(-EINVAL); + goto out_err; + } + xprt_set_bound(xprt); + INIT_DELAYED_WORK(&transport->connect_worker, + xs_local_setup_socket); + xs_format_peer_addresses(xprt, "local", RPCBIND_NETID_LOCAL); + break; + default: + ret = ERR_PTR(-EAFNOSUPPORT); + goto out_err; + } + + dprintk("RPC: set up xprt to %s via AF_LOCAL\n", + xprt->address_strings[RPC_DISPLAY_ADDR]); + + if (try_module_get(THIS_MODULE)) + return xprt; + ret = ERR_PTR(-EINVAL); +out_err: + xprt_free(xprt); + return ret; +} + static const struct rpc_timeout xs_udp_default_timeout = { .to_initval = 5 * HZ, .to_maxval = 30 * HZ, @@ -2448,6 +2827,14 @@ out_err: return ret; } +static struct xprt_class xs_local_transport = { + .list = LIST_HEAD_INIT(xs_local_transport.list), + .name = "named UNIX socket", + .owner = THIS_MODULE, + .ident = XPRT_TRANSPORT_LOCAL, + .setup = xs_setup_local, +}; + static struct xprt_class xs_udp_transport = { .list = LIST_HEAD_INIT(xs_udp_transport.list), .name = "udp", @@ -2483,6 +2870,7 @@ int init_socket_xprt(void) sunrpc_table_header = register_sysctl_table(sunrpc_table); #endif + xprt_register_transport(&xs_local_transport); xprt_register_transport(&xs_udp_transport); xprt_register_transport(&xs_tcp_transport); xprt_register_transport(&xs_bc_tcp_transport); @@ -2503,6 +2891,7 @@ void cleanup_socket_xprt(void) } #endif + xprt_unregister_transport(&xs_local_transport); xprt_unregister_transport(&xs_udp_transport); xprt_unregister_transport(&xs_tcp_transport); xprt_unregister_transport(&xs_bc_tcp_transport); -- cgit v1.2.3 From 81479c246c07b703aeb4bf54933b7d928cb5b717 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Fri, 27 May 2011 17:23:16 +0100 Subject: ARM: 6945/1: Add unwinding support for division functions The software division functions never had unwinding annotations added. Currently, when a division by zero occurs the backtrace shown will stop at Ldiv0 or some completely unrelated function. Add unwinding annotations in hopes of getting a more useful backtrace when a division by zero occurs. Signed-off-by: Laura Abbott Acked-by: Dave Martin Signed-off-by: Russell King --- arch/arm/lib/lib1funcs.S | 25 ++++++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index 6dc06487f3c3..c562f649734c 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -35,7 +35,7 @@ Boston, MA 02111-1307, USA. */ #include #include - +#include .macro ARM_DIV_BODY dividend, divisor, result, curbit @@ -207,6 +207,7 @@ Boston, MA 02111-1307, USA. */ ENTRY(__udivsi3) ENTRY(__aeabi_uidiv) +UNWIND(.fnstart) subs r2, r1, #1 moveq pc, lr @@ -230,10 +231,12 @@ ENTRY(__aeabi_uidiv) mov r0, r0, lsr r2 mov pc, lr +UNWIND(.fnend) ENDPROC(__udivsi3) ENDPROC(__aeabi_uidiv) ENTRY(__umodsi3) +UNWIND(.fnstart) subs r2, r1, #1 @ compare divisor with 1 bcc Ldiv0 @@ -247,10 +250,12 @@ ENTRY(__umodsi3) mov pc, lr +UNWIND(.fnend) ENDPROC(__umodsi3) ENTRY(__divsi3) ENTRY(__aeabi_idiv) +UNWIND(.fnstart) cmp r1, #0 eor ip, r0, r1 @ save the sign of the result. @@ -287,10 +292,12 @@ ENTRY(__aeabi_idiv) rsbmi r0, r0, #0 mov pc, lr +UNWIND(.fnend) ENDPROC(__divsi3) ENDPROC(__aeabi_idiv) ENTRY(__modsi3) +UNWIND(.fnstart) cmp r1, #0 beq Ldiv0 @@ -310,11 +317,14 @@ ENTRY(__modsi3) rsbmi r0, r0, #0 mov pc, lr +UNWIND(.fnend) ENDPROC(__modsi3) #ifdef CONFIG_AEABI ENTRY(__aeabi_uidivmod) +UNWIND(.fnstart) +UNWIND(.save {r0, r1, ip, lr} ) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_uidiv @@ -323,10 +333,12 @@ ENTRY(__aeabi_uidivmod) sub r1, r1, r3 mov pc, lr +UNWIND(.fnend) ENDPROC(__aeabi_uidivmod) ENTRY(__aeabi_idivmod) - +UNWIND(.fnstart) +UNWIND(.save {r0, r1, ip, lr} ) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_idiv ldmfd sp!, {r1, r2, ip, lr} @@ -334,15 +346,18 @@ ENTRY(__aeabi_idivmod) sub r1, r1, r3 mov pc, lr +UNWIND(.fnend) ENDPROC(__aeabi_idivmod) #endif Ldiv0: - +UNWIND(.fnstart) +UNWIND(.pad #4) +UNWIND(.save {lr}) str lr, [sp, #-8]! bl __div0 mov r0, #0 @ About as wrong as it could be. ldr pc, [sp], #8 - - +UNWIND(.fnend) +ENDPROC(Ldiv0) -- cgit v1.2.3 From 7c295975a85b049385dfe0d5ee0d4d543619fbdc Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 25 May 2011 16:20:31 -0700 Subject: gpio: make gpio_{request,free}_array gpio array parameter const gpio_{request,free}_array should not (and do not) modify the passed gpio array, so make the parameter const. Signed-off-by: Lars-Peter Clausen Acked-by: Eric Miao Acked-by: Wolfram Sang Signed-off-by: Andrew Morton Signed-off-by: Grant Likely --- drivers/gpio/gpiolib.c | 4 ++-- include/asm-generic/gpio.h | 4 ++-- include/linux/gpio.h | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 137a8ca67822..a971e3d043ba 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -1296,7 +1296,7 @@ EXPORT_SYMBOL_GPL(gpio_request_one); * @array: array of the 'struct gpio' * @num: how many GPIOs in the array */ -int gpio_request_array(struct gpio *array, size_t num) +int gpio_request_array(const struct gpio *array, size_t num) { int i, err; @@ -1319,7 +1319,7 @@ EXPORT_SYMBOL_GPL(gpio_request_array); * @array: array of the 'struct gpio' * @num: how many GPIOs in the array */ -void gpio_free_array(struct gpio *array, size_t num) +void gpio_free_array(const struct gpio *array, size_t num) { while (num--) gpio_free((array++)->gpio); diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index a98b52cb970b..fcdcb5d5c995 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -193,8 +193,8 @@ struct gpio { }; extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); -extern int gpio_request_array(struct gpio *array, size_t num); -extern void gpio_free_array(struct gpio *array, size_t num); +extern int gpio_request_array(const struct gpio *array, size_t num); +extern void gpio_free_array(const struct gpio *array, size_t num); #ifdef CONFIG_GPIO_SYSFS diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 0f8265f8e8c3..32d47e710661 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -41,7 +41,7 @@ static inline int gpio_request_one(unsigned gpio, return -ENOSYS; } -static inline int gpio_request_array(struct gpio *array, size_t num) +static inline int gpio_request_array(const struct gpio *array, size_t num) { return -ENOSYS; } @@ -54,7 +54,7 @@ static inline void gpio_free(unsigned gpio) WARN_ON(1); } -static inline void gpio_free_array(struct gpio *array, size_t num) +static inline void gpio_free_array(const struct gpio *array, size_t num) { might_sleep(); -- cgit v1.2.3 From bc786ccead15262a12bd673ed7a5afa6cbf0edcf Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 9 May 2011 19:58:49 +0900 Subject: gpio/pch_gpio: Support new device ML7223 Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub). The ML7223 IOH is for MP(Media Phone) use. The ML7223 is companion chip for Intel Atom E6xx series. The ML7223 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA Signed-off-by: Grant Likely --- drivers/gpio/Kconfig | 8 +++++++- drivers/gpio/pch_gpio.c | 2 ++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 2c30911b2414..978852afc9dc 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -358,13 +358,19 @@ config GPIO_LANGWELL Say Y here to support Intel Langwell/Penwell GPIO. config GPIO_PCH - tristate "PCH GPIO of Intel Topcliff" + tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GPIO" depends on PCI && X86 help This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded processor. This driver can access PCH GPIO device. + This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ + Output Hub), ML7223. + ML7223 IOH is for MP(Media Phone) use. + ML7223 is companion chip for Intel Atom E6xx series. + ML7223 is completely compatible for Intel EG20T PCH. + config GPIO_ML_IOH tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" depends on PCI diff --git a/drivers/gpio/pch_gpio.c b/drivers/gpio/pch_gpio.c index f970a5f3585e..36919e77c495 100644 --- a/drivers/gpio/pch_gpio.c +++ b/drivers/gpio/pch_gpio.c @@ -283,8 +283,10 @@ static int pch_gpio_resume(struct pci_dev *pdev) #define pch_gpio_resume NULL #endif +#define PCI_VENDOR_ID_ROHM 0x10DB static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) }, + { PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8014) }, { 0, } }; MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id); -- cgit v1.2.3 From 46f2cc80514e389bacfb642a32a4181fa1f1d20b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 27 May 2011 19:45:28 -0700 Subject: ALSA: fix hda AZX_DCAPS_NO_TCSEL quirk check in driver_caps Commit 9477c58e3308 ("ALSA: hda - Reorganize controller quriks with bit flags") changed the driver type compares into various quirk bits. However, the check for AZX_DCAPS_NO_TCSEL got reverted: instead of clearing TCSEL for chipsets that have that standard capability, it cleared then when the NO_TCSEL bit was set. This can lead to noise and repeated sounds - a weird "echo" behavior. As the comment just above says: "Ensuring these bits are 0 clears playback static on some HD Audio codecs". Which is definitely true at least on my Core i5 Westmere system. Cc: Takashi Iwai Signed-off-by: Linus Torvalds --- sound/pci/hda/hda_intel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 348705666f99..486f6deb3eee 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -1085,7 +1085,7 @@ static void azx_init_pci(struct azx *chip) * codecs. * The PCI register TCSEL is defined in the Intel manuals. */ - if (chip->driver_caps & AZX_DCAPS_NO_TCSEL) { + if (!(chip->driver_caps & AZX_DCAPS_NO_TCSEL)) { snd_printdd(SFX "Clearing TCSEL\n"); update_pci_byte(chip->pci, ICH6_PCIREG_TCSEL, 0x07, 0); } -- cgit v1.2.3 From 89e1be50c68eb5e58b873dce87bbac627ee18d1f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Fri, 27 May 2011 23:11:24 -0400 Subject: x86: Put back -pg to tsc.o and add no GCOV to vread_tsc_64.o The commit 44259b1abfaa8bb819d25d41d71e8e33e25dd36a Author: Andy Lutomirski x86-64: Move vread_tsc into a new file with sensible options Removed the -pg from tsc.o which caused the function graph tracer to go into an infinite function call recursion as it uses the tsc internally outside its recursion protection, thus tracing the tsc breaks the function graph tracer. This commit also added the file vread_tsc_64.c that gets used by vdso but failed to prevent GCOV from monkeying with it, causing userspace to try to access kernel data when GCOV was enabled. Thanks to Thomas Gleixner for pointing out GCOV as the likely culprit that added strange kernel accesses into the vread_tsc() call. Cc: Author: Andy Lutomirski Cc: Thomas Gleixner Signed-off-by: Steven Rostedt --- arch/x86/kernel/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index f5abe3a245b8..90b06d4daee2 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -8,6 +8,7 @@ CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE) ifdef CONFIG_FUNCTION_TRACER # Do not profile debug and lowlevel utilities +CFLAGS_REMOVE_tsc.o = -pg CFLAGS_REMOVE_rtc.o = -pg CFLAGS_REMOVE_paravirt-spinlocks.o = -pg CFLAGS_REMOVE_pvclock.o = -pg @@ -28,6 +29,7 @@ CFLAGS_paravirt.o := $(nostackp) GCOV_PROFILE_vsyscall_64.o := n GCOV_PROFILE_hpet.o := n GCOV_PROFILE_tsc.o := n +GCOV_PROFILE_vread_tsc_64.o := n GCOV_PROFILE_paravirt.o := n # vread_tsc_64 is hot and should be fully optimized: -- cgit v1.2.3 From 76f0b8d2d2c8d417623142069cdfde1cf1e108d5 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:41:54 -0700 Subject: bfs: remove unnecessary dentry_unhash on dir rename Bfs does not have problems with references to unlinked directories. CC: tigran@aivazian.fsnet.co.uk Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/bfs/dir.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c index c7d1d06b0483..b14cebfd9047 100644 --- a/fs/bfs/dir.c +++ b/fs/bfs/dir.c @@ -224,9 +224,6 @@ static int bfs_rename(struct inode *old_dir, struct dentry *old_dentry, struct bfs_sb_info *info; int error = -ENOENT; - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - old_bh = new_bh = NULL; old_inode = old_dentry->d_inode; if (S_ISDIR(old_inode->i_mode)) -- cgit v1.2.3 From 873ae4d5a8b282c6e2bbc09c6d59eeb1bec97ef7 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:41:55 -0700 Subject: sysv: remove unnecessary dentry_unhash from rmdir, dir rename sysv does not have problems with references to unlinked directories. CC: Christoph Hellwig Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/sysv/namei.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/sysv/namei.c b/fs/sysv/namei.c index e2cc6756f3b1..e474fbcf8bde 100644 --- a/fs/sysv/namei.c +++ b/fs/sysv/namei.c @@ -196,8 +196,6 @@ static int sysv_rmdir(struct inode * dir, struct dentry * dentry) struct inode *inode = dentry->d_inode; int err = -ENOTEMPTY; - dentry_unhash(dentry); - if (sysv_empty_dir(inode)) { err = sysv_unlink(dir, dentry); if (!err) { @@ -224,9 +222,6 @@ static int sysv_rename(struct inode * old_dir, struct dentry * old_dentry, struct sysv_dir_entry * old_de; int err = -ENOENT; - if (new_inode && S_ISDIR(new_inode->i_mode)) - dentry_unhash(new_dentry); - old_de = sysv_find_entry(old_dentry, &old_page); if (!old_de) goto out; -- cgit v1.2.3 From cf0f0536fa65ca1353476c49feed34891f3f7134 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:41:56 -0700 Subject: jffs2: remove unnecessary dentry_unhash from rmdir, dir rename jffs2 does not have problems with references to unlinked directories. CC: David Woodhouse CC: linux-mtd@lists.infradead.org Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/jffs2/dir.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/jffs2/dir.c b/fs/jffs2/dir.c index 05f73328b28b..82faddd1f321 100644 --- a/fs/jffs2/dir.c +++ b/fs/jffs2/dir.c @@ -609,8 +609,6 @@ static int jffs2_rmdir (struct inode *dir_i, struct dentry *dentry) int ret; uint32_t now = get_seconds(); - dentry_unhash(dentry); - for (fd = f->dents ; fd; fd = fd->next) { if (fd->ino) return -ENOTEMPTY; @@ -786,9 +784,6 @@ static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry, uint8_t type; uint32_t now; - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - /* The VFS will check for us and prevent trying to rename a * file over a directory and vice versa, but if it's a directory, * the VFS can't check whether the victim is empty. The filesystem -- cgit v1.2.3 From 44a8e6364e48ab93a1d86385b5fc9efe81395fa9 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:41:57 -0700 Subject: jfs: remove unnecessary dentry_unhash from rmdir, dir rename jfs does not have problems with references to unlinked directories. CC: Dave Kleikamp CC: jfs-discussion@lists.sourceforge.net Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/jfs/namei.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/jfs/namei.c b/fs/jfs/namei.c index 865df16a6cf3..eaaf2b511e89 100644 --- a/fs/jfs/namei.c +++ b/fs/jfs/namei.c @@ -360,8 +360,6 @@ static int jfs_rmdir(struct inode *dip, struct dentry *dentry) jfs_info("jfs_rmdir: dip:0x%p name:%s", dip, dentry->d_name.name); - dentry_unhash(dentry); - /* Init inode for quota operations. */ dquot_initialize(dip); dquot_initialize(ip); @@ -1097,9 +1095,6 @@ static int jfs_rename(struct inode *old_dir, struct dentry *old_dentry, jfs_info("jfs_rename: %s %s", old_dentry->d_name.name, new_dentry->d_name.name); - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - dquot_initialize(old_dir); dquot_initialize(new_dir); -- cgit v1.2.3 From 64370e2f9df572977757d70b1ad293b743dd9e20 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:41:58 -0700 Subject: logfs: remove unnecessary dentry_unhash from rmdir, dir rename logfs does not have problems with references to unlinked directories. CC: Joern Engel CC: logfs@logfs.org Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/logfs/dir.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/logfs/dir.c b/fs/logfs/dir.c index f34c9cde9e94..9ed89d1663f8 100644 --- a/fs/logfs/dir.c +++ b/fs/logfs/dir.c @@ -273,8 +273,6 @@ static int logfs_rmdir(struct inode *dir, struct dentry *dentry) { struct inode *inode = dentry->d_inode; - dentry_unhash(dentry); - if (!logfs_empty_dir(inode)) return -ENOTEMPTY; @@ -624,9 +622,6 @@ static int logfs_rename_cross(struct inode *old_dir, struct dentry *old_dentry, loff_t pos; int err; - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - /* 1. locate source dd */ err = logfs_get_dd(old_dir, old_dentry, &dd, &pos); if (err) -- cgit v1.2.3 From dfb55de89879a1c32a70d0a510b3701ed9a6b855 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:41:59 -0700 Subject: nilfs2: remove unnecessary dentry_unhash from rmdir, dir rename nilfs2 does not have problems with references to unlinked directories. CC: KONISHI Ryusuke CC: linux-nilfs@vger.kernel.org Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/nilfs2/namei.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/nilfs2/namei.c b/fs/nilfs2/namei.c index 1102a5fbb744..546849b3e88f 100644 --- a/fs/nilfs2/namei.c +++ b/fs/nilfs2/namei.c @@ -334,8 +334,6 @@ static int nilfs_rmdir(struct inode *dir, struct dentry *dentry) struct nilfs_transaction_info ti; int err; - dentry_unhash(dentry); - err = nilfs_transaction_begin(dir->i_sb, &ti, 0); if (err) return err; @@ -371,9 +369,6 @@ static int nilfs_rename(struct inode *old_dir, struct dentry *old_dentry, struct nilfs_transaction_info ti; int err; - if (new_inode && S_ISDIR(new_inode->i_mode)) - dentry_unhash(new_dentry); - err = nilfs_transaction_begin(old_dir->i_sb, &ti, 1); if (unlikely(err)) return err; -- cgit v1.2.3 From 0e54ec1c3a002a9d5e57b5ac73a934cc15a0fe06 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:00 -0700 Subject: ubifs: remove unnecessary dentry_unhash from rmdir, dir rename ubifs does not have problems with references to unlinked directories. CC: Artem Bityutskiy CC: Adrian Hunter CC: linux-mtd@lists.infradead.org Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/ubifs/dir.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index c2b80943560d..ef5abd38f0bf 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -656,8 +656,6 @@ static int ubifs_rmdir(struct inode *dir, struct dentry *dentry) struct ubifs_inode *dir_ui = ubifs_inode(dir); struct ubifs_budget_req req = { .mod_dent = 1, .dirtied_ino = 2 }; - dentry_unhash(dentry); - /* * Budget request settings: deletion direntry, deletion inode and * changing the parent inode. If budgeting fails, go ahead anyway @@ -978,9 +976,6 @@ static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry, .dirtied_ino_d = ALIGN(old_inode_ui->data_len, 8) }; struct timespec time; - if (new_inode && S_ISDIR(new_inode->i_mode)) - dentry_unhash(new_dentry); - /* * Budget request settings: deletion direntry, new direntry, removing * the old inode, and changing old and new parent directory inodes. -- cgit v1.2.3 From 87161faae26503a8ebe1be5ba72073ae860dbfc7 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:01 -0700 Subject: ufs: remove unnecessary dentry_unhash from rmdir, dir rename ufs does not have problems with references to unlinked directories. CC: Evgeniy Dushistov Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/ufs/namei.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/ufs/namei.c b/fs/ufs/namei.c index 953ebdfc5bf7..29309e25417f 100644 --- a/fs/ufs/namei.c +++ b/fs/ufs/namei.c @@ -258,8 +258,6 @@ static int ufs_rmdir (struct inode * dir, struct dentry *dentry) struct inode * inode = dentry->d_inode; int err= -ENOTEMPTY; - dentry_unhash(dentry); - lock_ufs(dir->i_sb); if (ufs_empty_dir (inode)) { err = ufs_unlink(dir, dentry); @@ -284,9 +282,6 @@ static int ufs_rename(struct inode *old_dir, struct dentry *old_dentry, struct ufs_dir_entry *old_de; int err = -ENOENT; - if (new_inode && S_ISDIR(new_inode->i_mode)) - dentry_unhash(new_dentry); - old_de = ufs_find_entry(old_dir, &old_dentry->d_name, &old_page); if (!old_de) goto out; -- cgit v1.2.3 From cc350c2764a657ee012efd5bd260a6cd5be2f877 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:02 -0700 Subject: reiserfs: remove unnecessary dentry_unhash from rmdir, dir rename Reiserfs does not have problems with references to unlinked directories. CC: reiserfs-devel@vger.kernel.org Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/reiserfs/namei.c | 5 ----- fs/reiserfs/xattr.c | 1 - 2 files changed, 6 deletions(-) diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c index 76c8164d5651..118662690cdf 100644 --- a/fs/reiserfs/namei.c +++ b/fs/reiserfs/namei.c @@ -831,8 +831,6 @@ static int reiserfs_rmdir(struct inode *dir, struct dentry *dentry) INITIALIZE_PATH(path); struct reiserfs_dir_entry de; - dentry_unhash(dentry); - /* we will be doing 2 balancings and update 2 stat data, we change quotas * of the owner of the directory and of the owner of the parent directory. * The quota structure is possibly deleted only on last iput => outside @@ -1227,9 +1225,6 @@ static int reiserfs_rename(struct inode *old_dir, struct dentry *old_dentry, unsigned long savelink = 1; struct timespec ctime; - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - /* three balancings: (1) old name removal, (2) new name insertion and (3) maybe "save" link insertion stat data updates: (1) old directory, diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c index 50f1abccd1cd..e8a62f41b458 100644 --- a/fs/reiserfs/xattr.c +++ b/fs/reiserfs/xattr.c @@ -98,7 +98,6 @@ static int xattr_rmdir(struct inode *dir, struct dentry *dentry) reiserfs_mutex_lock_nested_safe(&dentry->d_inode->i_mutex, I_MUTEX_CHILD, dir->i_sb); - dentry_unhash(dentry); error = dir->i_op->rmdir(dir, dentry); if (!error) dentry->d_inode->i_flags |= S_DEAD; -- cgit v1.2.3 From 7020739df2fa0e2126fc9739987e016860f14323 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:03 -0700 Subject: udf: remove unnecessary dentry_unhash from rmdir, dir rename udf does not have problems with references to unlinked directories. CC: Jan Kara Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/udf/namei.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/udf/namei.c b/fs/udf/namei.c index 4d76594c2a8f..f1dce848ef96 100644 --- a/fs/udf/namei.c +++ b/fs/udf/namei.c @@ -783,8 +783,6 @@ static int udf_rmdir(struct inode *dir, struct dentry *dentry) struct fileIdentDesc *fi, cfi; struct kernel_lb_addr tloc; - dentry_unhash(dentry); - retval = -ENOENT; fi = udf_find_entry(dir, &dentry->d_name, &fibh, &cfi); if (!fi) @@ -1083,9 +1081,6 @@ static int udf_rename(struct inode *old_dir, struct dentry *old_dentry, struct kernel_lb_addr tloc; struct udf_inode_info *old_iinfo = UDF_I(old_inode); - if (new_inode && S_ISDIR(new_inode->i_mode)) - dentry_unhash(new_dentry); - ofi = udf_find_entry(old_dir, &old_dentry->d_name, &ofibh, &ocfi); if (ofi) { if (ofibh.sbh != ofibh.ebh) -- cgit v1.2.3 From 8aaa0f5431d8d1181b3d1a1bcd8f3330c0ce275f Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:04 -0700 Subject: omfs: remove unnecessary dentry_unhash on rmdir, dir rneame omfs does not have problems with references to unlinked directories. CC: Bob Copeland CC: linux-karma-devel@lists.sourceforge.net Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/omfs/dir.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c index c368360c35a1..3b8d3979e03b 100644 --- a/fs/omfs/dir.c +++ b/fs/omfs/dir.c @@ -241,11 +241,9 @@ static int omfs_remove(struct inode *dir, struct dentry *dentry) int ret; - if (S_ISDIR(inode->i_mode)) { - dentry_unhash(dentry); - if (!omfs_dir_is_empty(inode)) - return -ENOTEMPTY; - } + if (S_ISDIR(inode->i_mode) && + !omfs_dir_is_empty(inode)) + return -ENOTEMPTY; ret = omfs_delete_entry(dentry); if (ret) @@ -382,9 +380,6 @@ static int omfs_rename(struct inode *old_dir, struct dentry *old_dentry, int err; if (new_inode) { - if (S_ISDIR(new_inode->i_mode)) - dentry_unhash(new_dentry); - /* overwriting existing file/dir */ err = omfs_remove(new_dir, new_dentry); if (err) -- cgit v1.2.3 From 4e82d61b6ac4966b3b61c2d97ddf04928f037be1 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:05 -0700 Subject: hfs: remove unnecessary dentry_unhash on rmdir, dir rename hfs does not have problems with references to unlinked directories. Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/hfs/dir.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/fs/hfs/dir.c b/fs/hfs/dir.c index 1cb70cdba2c1..b4d70b13be92 100644 --- a/fs/hfs/dir.c +++ b/fs/hfs/dir.c @@ -253,9 +253,6 @@ static int hfs_remove(struct inode *dir, struct dentry *dentry) struct inode *inode = dentry->d_inode; int res; - if (S_ISDIR(inode->i_mode)) - dentry_unhash(dentry); - if (S_ISDIR(inode->i_mode) && inode->i_size != 2) return -ENOTEMPTY; res = hfs_cat_delete(inode->i_ino, dir, &dentry->d_name); @@ -286,9 +283,6 @@ static int hfs_rename(struct inode *old_dir, struct dentry *old_dentry, /* Unlink destination if it already exists */ if (new_dentry->d_inode) { - if (S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - res = hfs_remove(new_dir, new_dentry); if (res) return res; -- cgit v1.2.3 From e3911785b8ae6897b3dae2af4fa296aa5a0f2c56 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:06 -0700 Subject: hfsplus: remove unnecessary dentry_unhash on rmdir, dir rename hfsplus does not have problems with references to unlinked directories. Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/hfsplus/dir.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/fs/hfsplus/dir.c b/fs/hfsplus/dir.c index b28835091dd0..4df5059c25da 100644 --- a/fs/hfsplus/dir.c +++ b/fs/hfsplus/dir.c @@ -370,8 +370,6 @@ static int hfsplus_rmdir(struct inode *dir, struct dentry *dentry) struct inode *inode = dentry->d_inode; int res; - dentry_unhash(dentry); - if (inode->i_size != 2) return -ENOTEMPTY; @@ -469,12 +467,10 @@ static int hfsplus_rename(struct inode *old_dir, struct dentry *old_dentry, /* Unlink destination if it already exists */ if (new_dentry->d_inode) { - if (S_ISDIR(new_dentry->d_inode->i_mode)) { - dentry_unhash(new_dentry); + if (S_ISDIR(new_dentry->d_inode->i_mode)) res = hfsplus_rmdir(new_dir, new_dentry); - } else { + else res = hfsplus_unlink(new_dir, new_dentry); - } if (res) return res; } -- cgit v1.2.3 From e41a59e0550b7bb40fe8c3438d690712e9fd511c Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:07 -0700 Subject: hostfs: remove unnecessary dentry_unhash on rmdir, dir rename hostfs does not have problems with references to unlinked directories. CC: Jeff Dike CC: Richard Weinberger CC: user-mode-linux-devel@lists.sourceforge.net Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/hostfs/hostfs_kern.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c index e6816b9e6903..2638c834ed28 100644 --- a/fs/hostfs/hostfs_kern.c +++ b/fs/hostfs/hostfs_kern.c @@ -683,8 +683,6 @@ int hostfs_rmdir(struct inode *ino, struct dentry *dentry) char *file; int err; - dentry_unhash(dentry); - if ((file = dentry_name(dentry)) == NULL) return -ENOMEM; err = do_rmdir(file); @@ -738,9 +736,6 @@ int hostfs_rename(struct inode *from_ino, struct dentry *from, char *from_name, *to_name; int err; - if (to->d_inode && S_ISDIR(to->d_inode->i_mode)) - dentry_unhash(to); - if ((from_name = dentry_name(from)) == NULL) return -ENOMEM; if ((to_name = dentry_name(to)) == NULL) { -- cgit v1.2.3 From 55e5b7e022eaaa805a44e3b6ecd5c8638d862050 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:08 -0700 Subject: ecryptfs: remove unnecessary dentry_unhash on rmdir, dir rename ecryptfs does not have problems with references to unlinked directories. CC: Tyler Hicks CC: Dustin Kirkland CC: ecryptfs-devel@lists.launchpad.net Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/ecryptfs/inode.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 227b409b8406..4d4cc6a90cd5 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -521,8 +521,6 @@ static int ecryptfs_rmdir(struct inode *dir, struct dentry *dentry) struct dentry *lower_dir_dentry; int rc; - dentry_unhash(dentry); - lower_dentry = ecryptfs_dentry_to_lower(dentry); dget(dentry); lower_dir_dentry = lock_parent(lower_dentry); @@ -573,9 +571,6 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry, struct dentry *lower_new_dir_dentry; struct dentry *trap = NULL; - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry); lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry); dget(lower_old_dentry); -- cgit v1.2.3 From 7ce605d93b775e8a960b0be244f7be565e73b3c1 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:09 -0700 Subject: ncpfs: document dentry_unhash usage ncpfs returns EBUSY if there are any references to the directory. The dentry_unhash call only unhashes the dentry if there are no references. CC: Petr Vandrovec CC: linux-kernel@vger.kernel.org Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/ncpfs/dir.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/ncpfs/dir.c b/fs/ncpfs/dir.c index e3e646b06404..81c287d105d5 100644 --- a/fs/ncpfs/dir.c +++ b/fs/ncpfs/dir.c @@ -1033,8 +1033,11 @@ static int ncp_rmdir(struct inode *dir, struct dentry *dentry) DPRINTK("ncp_rmdir: removing %s/%s\n", dentry->d_parent->d_name.name, dentry->d_name.name); + /* + * fail with EBUSY if there are still references to this + * directory. + */ dentry_unhash(dentry); - error = -EBUSY; if (!d_unhashed(dentry)) goto out; -- cgit v1.2.3 From 76cc071a06afb4d2dd17bb1b855a233a419e7e02 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:10 -0700 Subject: ncpfs: fix rename over directory with dangling references ncpfs does not handle references to unlinked directories (or so it would seem given the ncp_rmdir check). Since it is also possible to rename over an empty directory, perform the same check here. CC: Petr Vandrovec CC: linux-kernel@vger.kernel.org Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/ncpfs/dir.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/fs/ncpfs/dir.c b/fs/ncpfs/dir.c index 81c287d105d5..9c51f621e901 100644 --- a/fs/ncpfs/dir.c +++ b/fs/ncpfs/dir.c @@ -1144,8 +1144,16 @@ static int ncp_rename(struct inode *old_dir, struct dentry *old_dentry, old_dentry->d_parent->d_name.name, old_dentry->d_name.name, new_dentry->d_parent->d_name.name, new_dentry->d_name.name); - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) + if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) { + /* + * fail with EBUSY if there are still references to this + * directory. + */ dentry_unhash(new_dentry); + error = -EBUSY; + if (!d_unhashed(new_dentry)) + goto out; + } ncp_age_dentry(server, old_dentry); ncp_age_dentry(server, new_dentry); -- cgit v1.2.3 From 86905d6d96f138a99326016e4f0ca933200e0729 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:11 -0700 Subject: 9p: remove unnecessary dentry_unhash on rmdir, dir rename 9p has no problems with references to unlinked directories. CC: Eric Van Hensbergen CC: Ron Minnich CC: Latchesar Ionkov CC: v9fs-developer@lists.sourceforge.net Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/9p/vfs_inode.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 8d7f3e69ae29..7f6c67703195 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -814,7 +814,6 @@ int v9fs_vfs_unlink(struct inode *i, struct dentry *d) int v9fs_vfs_rmdir(struct inode *i, struct dentry *d) { - dentry_unhash(d); return v9fs_remove(i, d, 1); } @@ -840,9 +839,6 @@ v9fs_vfs_rename(struct inode *old_dir, struct dentry *old_dentry, struct p9_fid *newdirfid; struct p9_wstat wstat; - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - P9_DPRINTK(P9_DEBUG_VFS, "\n"); retval = 0; old_inode = old_dentry->d_inode; -- cgit v1.2.3 From 94f9901b6c05d5e1e38d887179b8307efbc8e10c Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:12 -0700 Subject: affs: remove unnecessary dentry_unhash on rmdir, dir rename affs has no problems with references to unlinked directories. Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/affs/namei.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/affs/namei.c b/fs/affs/namei.c index 03330e2e390c..e3e9efc1fdd8 100644 --- a/fs/affs/namei.c +++ b/fs/affs/namei.c @@ -320,8 +320,6 @@ affs_rmdir(struct inode *dir, struct dentry *dentry) dentry->d_inode->i_ino, (int)dentry->d_name.len, dentry->d_name.name); - dentry_unhash(dentry); - return affs_remove_header(dentry); } @@ -419,9 +417,6 @@ affs_rename(struct inode *old_dir, struct dentry *old_dentry, struct buffer_head *bh = NULL; int retval; - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - pr_debug("AFFS: rename(old=%u,\"%*s\" to new=%u,\"%*s\")\n", (u32)old_dir->i_ino, (int)old_dentry->d_name.len, old_dentry->d_name.name, (u32)new_dir->i_ino, (int)new_dentry->d_name.len, new_dentry->d_name.name); -- cgit v1.2.3 From 705da2de95ce79199a52f21d82dd9f36b89afd12 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:13 -0700 Subject: afs: remove unnecessary dentry_unhash on rmdir, dir rename afs has no problems with references to unlinked directories. CC: David Howells CC: linux-afs@lists.infradead.org Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/afs/dir.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/afs/dir.c b/fs/afs/dir.c index 2c4e05160042..20c106f24927 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -845,8 +845,6 @@ static int afs_rmdir(struct inode *dir, struct dentry *dentry) _enter("{%x:%u},{%s}", dvnode->fid.vid, dvnode->fid.vnode, dentry->d_name.name); - dentry_unhash(dentry); - ret = -ENAMETOOLONG; if (dentry->d_name.len >= AFSNAMEMAX) goto error; @@ -1148,9 +1146,6 @@ static int afs_rename(struct inode *old_dir, struct dentry *old_dentry, struct key *key; int ret; - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - vnode = AFS_FS_I(old_dentry->d_inode); orig_dvnode = AFS_FS_I(old_dir); new_dvnode = AFS_FS_I(new_dir); -- cgit v1.2.3 From 42b850b2806f8f55f5c3a0e3c78af738d5054fdc Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:14 -0700 Subject: coda: remove unnecessary dentry_unhash on rmdir, dir rename Coda has no problems with references to unlinked directories. CC: Jan Harkes CC: coda@cs.cmu.edu CC: codalist@coda.cs.cmu.edu Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/coda/dir.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/coda/dir.c b/fs/coda/dir.c index a46126fd5735..2b8dae4d121e 100644 --- a/fs/coda/dir.c +++ b/fs/coda/dir.c @@ -336,8 +336,6 @@ static int coda_rmdir(struct inode *dir, struct dentry *de) int len = de->d_name.len; int error; - dentry_unhash(de); - error = venus_rmdir(dir->i_sb, coda_i2f(dir), name, len); if (!error) { /* VFS may delete the child */ @@ -361,9 +359,6 @@ static int coda_rename(struct inode *old_dir, struct dentry *old_dentry, int new_length = new_dentry->d_name.len; int error; - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - error = venus_rename(old_dir->i_sb, coda_i2f(old_dir), coda_i2f(new_dir), old_length, new_length, (const char *) old_name, (const char *)new_name); -- cgit v1.2.3 From 526e7ce5528c8addcf154acec41b615f71dce7e1 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:15 -0700 Subject: fuse: remove unnecessary dentry_unhash on rmdir, dir rename Fuse has no problems with references to unlinked directories. CC: Miklos Szeredi CC: fuse-devel@lists.sourceforge.net Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/fuse/dir.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 0d0e3faddcfa..d50160714595 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -667,8 +667,6 @@ static int fuse_rmdir(struct inode *dir, struct dentry *entry) if (IS_ERR(req)) return PTR_ERR(req); - dentry_unhash(entry); - req->in.h.opcode = FUSE_RMDIR; req->in.h.nodeid = get_node_id(dir); req->in.numargs = 1; @@ -694,9 +692,6 @@ static int fuse_rename(struct inode *olddir, struct dentry *oldent, struct fuse_conn *fc = get_fuse_conn(olddir); struct fuse_req *req = fuse_get_req(fc); - if (newent->d_inode && S_ISDIR(newent->d_inode->i_mode)) - dentry_unhash(newent); - if (IS_ERR(req)) return PTR_ERR(req); -- cgit v1.2.3 From b80d2c228d8206cadc32226750dbbf3b707bdd19 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:16 -0700 Subject: minix: remove unnecessary dentry_unhash on rmdir, dir rename Minix has no issues with references to unlinked directories. Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/minix/namei.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/minix/namei.c b/fs/minix/namei.c index f60aed8db9c4..6e6777f1b4b2 100644 --- a/fs/minix/namei.c +++ b/fs/minix/namei.c @@ -168,8 +168,6 @@ static int minix_rmdir(struct inode * dir, struct dentry *dentry) struct inode * inode = dentry->d_inode; int err = -ENOTEMPTY; - dentry_unhash(dentry); - if (minix_empty_dir(inode)) { err = minix_unlink(dir, dentry); if (!err) { @@ -192,9 +190,6 @@ static int minix_rename(struct inode * old_dir, struct dentry *old_dentry, struct minix_dir_entry * old_de; int err = -ENOENT; - if (new_inode && S_ISDIR(new_inode->i_mode)) - dentry_unhash(new_dentry); - old_de = minix_find_entry(old_dentry, &old_page); if (!old_de) goto out; -- cgit v1.2.3 From 45adfef7d023004ff95bf63b5f2f0e2d88afac3f Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:17 -0700 Subject: hpfs: remove unnecessary dentry_unhash on rmdir, dir rename Hpfs has no problems with references to unlinked directories. We leave one dentry_unhash call in place, in hpfs_unlink's strange path where it tries to truncate a file because the disk is full. I'm not sure what the full story is there. CC: Mikulas Patocka Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/hpfs/namei.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/hpfs/namei.c b/fs/hpfs/namei.c index ff0ce21c0867..acf95dab2aac 100644 --- a/fs/hpfs/namei.c +++ b/fs/hpfs/namei.c @@ -439,8 +439,6 @@ static int hpfs_rmdir(struct inode *dir, struct dentry *dentry) int err; int r; - dentry_unhash(dentry); - hpfs_adjust_length(name, &len); hpfs_lock(dir->i_sb); err = -ENOENT; @@ -535,9 +533,6 @@ static int hpfs_rename(struct inode *old_dir, struct dentry *old_dentry, struct fnode *fnode; int err; - if (new_inode && S_ISDIR(new_inode->i_mode)) - dentry_unhash(new_dentry); - if ((err = hpfs_chk_name(new_name, &new_len))) return err; err = 0; hpfs_adjust_length(old_name, &old_len); -- cgit v1.2.3 From f4ff0e25c5093dd89e9cac4a8f71a57587ada787 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:18 -0700 Subject: fat: remove unnecessary dentry_unhash on rmdir, dir rename fat does not have problems with references to unlinked directories. CC: OGAWA Hirofumi Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/fat/namei_msdos.c | 5 ----- fs/fat/namei_vfat.c | 5 ----- 2 files changed, 10 deletions(-) diff --git a/fs/fat/namei_msdos.c b/fs/fat/namei_msdos.c index be15437c272e..3b222dafd15b 100644 --- a/fs/fat/namei_msdos.c +++ b/fs/fat/namei_msdos.c @@ -326,8 +326,6 @@ static int msdos_rmdir(struct inode *dir, struct dentry *dentry) struct fat_slot_info sinfo; int err; - dentry_unhash(dentry); - lock_super(sb); /* * Check whether the directory is not in use, then check @@ -459,9 +457,6 @@ static int do_msdos_rename(struct inode *old_dir, unsigned char *old_name, old_inode = old_dentry->d_inode; new_inode = new_dentry->d_inode; - if (new_inode && S_ISDIR(new_inode->i_mode)) - dentry_unhash(new_dentry); - err = fat_scan(old_dir, old_name, &old_sinfo); if (err) { err = -EIO; diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c index c61a6789f36c..20b4ea53fdc4 100644 --- a/fs/fat/namei_vfat.c +++ b/fs/fat/namei_vfat.c @@ -824,8 +824,6 @@ static int vfat_rmdir(struct inode *dir, struct dentry *dentry) struct fat_slot_info sinfo; int err; - dentry_unhash(dentry); - lock_super(sb); err = fat_dir_empty(inode); @@ -933,9 +931,6 @@ static int vfat_rename(struct inode *old_dir, struct dentry *old_dentry, int err, is_dir, update_dotdot, corrupt = 0; struct super_block *sb = old_dir->i_sb; - if (new_dentry->d_inode && S_ISDIR(new_dentry->d_inode->i_mode)) - dentry_unhash(new_dentry); - old_sinfo.bh = sinfo.bh = dotdot_bh = NULL; old_inode = old_dentry->d_inode; new_inode = new_dentry->d_inode; -- cgit v1.2.3 From 98702467f829177b3993f17da9fe5c202d160e5e Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Fri, 27 May 2011 13:42:19 -0700 Subject: configfs: remove unnecessary dentry_unhash on rmdir, dir rename configfs does not have problems with references to unlinked directories. CC: Joel Becker Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/configfs/dir.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 9d17d350abc5..9a37a9b6de3a 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -1359,8 +1359,6 @@ static int configfs_rmdir(struct inode *dir, struct dentry *dentry) struct module *subsys_owner = NULL, *dead_item_owner = NULL; int ret; - dentry_unhash(dentry); - if (dentry->d_parent == configfs_sb->s_root) return -EPERM; -- cgit v1.2.3 From 3d08bcc887a1c8d12be8d81f747ffa2e8a44b67b Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 27 May 2011 12:23:34 -0700 Subject: mm: Wait for writeback when grabbing pages to begin a write When grabbing a page for a buffered IO write, the mm should wait for writeback on the page to complete so that the page does not become writable during the IO operation. This change is needed to provide page stability during writes for all filesystems. Signed-off-by: Darrick J. Wong Signed-off-by: Al Viro --- mm/filemap.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/mm/filemap.c b/mm/filemap.c index bcdc393b6580..dac95a24deac 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2327,7 +2327,7 @@ struct page *grab_cache_page_write_begin(struct address_space *mapping, repeat: page = find_lock_page(mapping, index); if (page) - return page; + goto found; page = __page_cache_alloc(mapping_gfp_mask(mapping) & ~gfp_notmask); if (!page) @@ -2340,6 +2340,8 @@ repeat: goto repeat; return NULL; } +found: + wait_on_page_writeback(page); return page; } EXPORT_SYMBOL(grab_cache_page_write_begin); -- cgit v1.2.3 From d76ee18a8551e33ad7dbd55cac38bc7b094f3abb Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 27 May 2011 12:23:41 -0700 Subject: fs: block_page_mkwrite should wait for writeback to finish For filesystems such as nilfs2 and xfs that use block_page_mkwrite, modify that function to wait for pending writeback before allowing the page to become writable. This is needed to stabilize pages during writeback for those two filesystems. Signed-off-by: Darrick J. Wong Signed-off-by: Al Viro --- fs/buffer.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/buffer.c b/fs/buffer.c index 698c6b2cc462..49c9aada0374 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -2382,6 +2382,7 @@ int __block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf, ret = -EAGAIN; goto out_unlock; } + wait_on_page_writeback(page); return 0; out_unlock: unlock_page(page); -- cgit v1.2.3 From 1ed7891f8dcdba62041dfa265aea038afb49635c Mon Sep 17 00:00:00 2001 From: Mattias Wallin Date: Fri, 27 May 2011 11:49:43 +0200 Subject: mfd: Use mfd cell platform_data for db8500-prcmu cells platform bits With the addition of a device platform mfd_cell pointer, MFD drivers can go back to passing platform data back to their sub drivers. This allows for an mfd_cell->mfd_data removal and thus keep the sub drivers MFD agnostic. This is mostly needed for non MFD aware sub drivers. Signed-off-by: Mattias Wallin Signed-off-by: Samuel Ortiz --- drivers/mfd/db8500-prcmu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index e63782107e2f..02a15d7cb3b0 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -2005,7 +2005,8 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { static struct mfd_cell db8500_prcmu_devs[] = { { .name = "db8500-prcmu-regulators", - .mfd_data = &db8500_regulators, + .platform_data = &db8500_regulators, + .pdata_size = sizeof(db8500_regulators), }, { .name = "cpufreq-u8500", -- cgit v1.2.3 From 66c500ff36d74c6669ad260deda4ce8125b55304 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Fri, 27 May 2011 22:13:08 +0100 Subject: mfd: Fix build breakage caused by tps65910 gpio directory move Signed-off-by: Liam Girdwood Acked-by: Randy Dunlap Signed-off-by: Samuel Ortiz --- drivers/mfd/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b6c267724e14..0f09c057e796 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -721,7 +721,7 @@ config MFD_PM8XXX_IRQ config MFD_TPS65910 bool "TPS65910 Power Management chip" - depends on I2C=y + depends on I2C=y && GPIOLIB select MFD_CORE select GPIO_TPS65910 help -- cgit v1.2.3 From 6df87e65dbe4528ef07b917af89913abb8caaaba Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Sat, 28 May 2011 14:44:46 +0200 Subject: block: improve the bio_add_page() and bio_add_pc_page() descriptions The descriptions of bio_add_page() and bio_add_pc_page() are slightly inconsistent; improve them. Signed-off-by: Andreas Gruenbacher Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe --- fs/bio.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/fs/bio.c b/fs/bio.c index 840a0d755248..9bfade8a609b 100644 --- a/fs/bio.c +++ b/fs/bio.c @@ -638,10 +638,11 @@ static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page * @offset: vec entry offset * * Attempt to add a page to the bio_vec maplist. This can fail for a - * number of reasons, such as the bio being full or target block - * device limitations. The target block device must allow bio's - * smaller than PAGE_SIZE, so it is always possible to add a single - * page to an empty bio. This should only be used by REQ_PC bios. + * number of reasons, such as the bio being full or target block device + * limitations. The target block device must allow bio's up to PAGE_SIZE, + * so it is always possible to add a single page to an empty bio. + * + * This should only be used by REQ_PC bios. */ int bio_add_pc_page(struct request_queue *q, struct bio *bio, struct page *page, unsigned int len, unsigned int offset) @@ -659,10 +660,9 @@ EXPORT_SYMBOL(bio_add_pc_page); * @offset: vec entry offset * * Attempt to add a page to the bio_vec maplist. This can fail for a - * number of reasons, such as the bio being full or target block - * device limitations. The target block device must allow bio's - * smaller than PAGE_SIZE, so it is always possible to add a single - * page to an empty bio. + * number of reasons, such as the bio being full or target block device + * limitations. The target block device must allow bio's up to PAGE_SIZE, + * so it is always possible to add a single page to an empty bio. */ int bio_add_page(struct bio *bio, struct page *page, unsigned int len, unsigned int offset) -- cgit v1.2.3 From 35fbf5bcf497d6ddbe7b6478141e7526d1474ff5 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sat, 28 May 2011 14:44:46 +0200 Subject: nbd: pass MSG_* flags to kernel_recvmsg() Unlike kernel_sendmsg(), kernel_recvmsg() requires passing flags explicitly via last parameter instead of struct msghdr.msg_flags. Therefore calls to sock_xmit(lo, 0, ..., MSG_WAITALL) have not been processed properly by tcp layer wrt. the flag. Fix it. Signed-off-by: Namhyung Kim Cc: Paul Clements Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index e6fc716aca45..1df3bfe5225b 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -192,7 +192,8 @@ static int sock_xmit(struct nbd_device *lo, int send, void *buf, int size, if (lo->xmit_timeout) del_timer_sync(&ti); } else - result = kernel_recvmsg(sock, &msg, &iov, 1, size, 0); + result = kernel_recvmsg(sock, &msg, &iov, 1, size, + msg.msg_flags); if (signal_pending(current)) { siginfo_t info; -- cgit v1.2.3 From 3b2710824e00d238554c13b5add347e6c701ab1a Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sat, 28 May 2011 14:44:46 +0200 Subject: nbd: limit module parameters to a sane value The 'max_part' parameter controls the number of maximum partition a nbd device can have. However if a user specifies very large value it would exceed the limitation of device minor number and can cause a kernel oops (or, at least, produce invalid device nodes in some cases). In addition, specifying large 'nbds_max' value causes same problem for the same reason. On my desktop, following command results to the kernel bug: $ sudo modprobe nbd max_part=100000 kernel BUG at /media/Linux_Data/project/linux/fs/sysfs/group.c:65! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/virtual/block/nbd4/range CPU 1 Modules linked in: nbd(+) bridge stp llc kvm_intel kvm asus_atk0110 sg sr_mod cdrom Pid: 2522, comm: modprobe Tainted: G W 2.6.39-leonard+ #159 System manufacturer System Product Name/P5G41TD-M PRO RIP: 0010:[] [] internal_create_group+0x2f/0x166 RSP: 0018:ffff8801009f1de8 EFLAGS: 00010246 RAX: 00000000ffffffef RBX: ffff880103920478 RCX: 00000000000a7bd3 RDX: ffffffff81a2dbe0 RSI: 0000000000000000 RDI: ffff880103920478 RBP: ffff8801009f1e38 R08: ffff880103920468 R09: ffff880103920478 R10: ffff8801009f1de8 R11: ffff88011eccbb68 R12: ffffffff81a2dbe0 R13: ffff880103920468 R14: 0000000000000000 R15: ffff880103920400 FS: 00007f3c49de9700(0000) GS:ffff88011f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f3b7fe7c000 CR3: 00000000cd58d000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2522, threadinfo ffff8801009f0000, task ffff8801009a93a0) Stack: ffff8801009f1e58 ffffffff812e8f6e ffff8801009f1e58 ffffffff812e7a80 ffff880000000010 ffff880103920400 ffff8801002fd0c0 ffff880103920468 0000000000000011 ffff880103920400 ffff8801009f1e48 ffffffff8115ab6a Call Trace: [] ? device_add+0x4f1/0x5e4 [] ? dev_set_name+0x41/0x43 [] sysfs_create_group+0x13/0x15 [] blk_trace_init_sysfs+0x14/0x16 [] blk_register_queue+0x4c/0xfd [] add_disk+0xe4/0x29c [] nbd_init+0x2ab/0x30d [nbd] [] ? 0xffffffffa007dfff [] do_one_initcall+0x7f/0x13e [] sys_init_module+0xa1/0x1e3 [] system_call_fastpath+0x16/0x1b Code: 41 57 41 56 41 55 41 54 53 48 83 ec 28 0f 1f 44 00 00 48 89 fb 41 89 f6 49 89 d4 48 85 ff 74 0b 85 f6 75 0b 48 83 7f 30 00 75 14 <0f> 0b eb fe b9 ea ff ff ff 48 83 7f 30 00 0f 84 09 01 00 00 49 RIP [] internal_create_group+0x2f/0x166 RSP ---[ end trace 753285ffbf72c57c ]--- Signed-off-by: Namhyung Kim Cc: Laurent Vivier Cc: Paul Clements Cc: stable@kernel.org Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 1df3bfe5225b..fdee7567fd15 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -757,6 +757,12 @@ static int __init nbd_init(void) if (max_part > 0) part_shift = fls(max_part); + if ((1UL << part_shift) > DISK_MAX_PARTS) + return -EINVAL; + + if (nbds_max > 1UL << (MINORBITS - part_shift)) + return -EINVAL; + for (i = 0; i < nbds_max; i++) { struct gendisk *disk = alloc_disk(1 << part_shift); if (!disk) -- cgit v1.2.3 From 5988ce239682854d4e632fb58bff000700830394 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Sat, 28 May 2011 14:44:46 +0200 Subject: nbd: adjust 'max_part' according to part_shift The 'max_part' parameter determines how many partitions are supported on each nbd device. However the actual number can be changed to the power of 2 minus 1 form during the module initialization as alloc_disk() is called with (1 << part_shift) for some reason. So adjust 'max_part' also at least for consistency with loop and brd. It is exported via sysfs already, and a user should check this value after module loading if [s]he wants to use that number correctly (i.e. fdisk or something). Signed-off-by: Namhyung Kim Cc: Laurent Vivier Cc: Paul Clements Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index fdee7567fd15..f533f3375e24 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -754,9 +754,20 @@ static int __init nbd_init(void) return -ENOMEM; part_shift = 0; - if (max_part > 0) + if (max_part > 0) { part_shift = fls(max_part); + /* + * Adjust max_part according to part_shift as it is exported + * to user space so that user can know the max number of + * partition kernel should be able to manage. + * + * Note that -1 is required because partition 0 is reserved + * for the whole disk. + */ + max_part = (1UL << part_shift) - 1; + } + if ((1UL << part_shift) > DISK_MAX_PARTS) return -EINVAL; -- cgit v1.2.3 From f62508f68d04adefc4cf9b0177ba02c8818b3eec Mon Sep 17 00:00:00 2001 From: Juri Lelli Date: Thu, 19 May 2011 12:53:53 +0200 Subject: Documentation: Add statistics about nested locks Explain what the trailing "/1" on some lock class names of lock_stat output means. Reviewed-by: Yong Zhang Signed-off-by: Juri Lelli Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/4DD4F6C1.5090701@gmail.com Signed-off-by: Ingo Molnar --- Documentation/lockstat.txt | 36 ++++++++++++++++++++++++++++++++++-- 1 file changed, 34 insertions(+), 2 deletions(-) diff --git a/Documentation/lockstat.txt b/Documentation/lockstat.txt index 9c0a80d17a23..cef00d42ed5b 100644 --- a/Documentation/lockstat.txt +++ b/Documentation/lockstat.txt @@ -12,8 +12,9 @@ Because things like lock contention can severely impact performance. - HOW Lockdep already has hooks in the lock functions and maps lock instances to -lock classes. We build on that. The graph below shows the relation between -the lock functions and the various hooks therein. +lock classes. We build on that (see Documentation/lockdep-design.txt). +The graph below shows the relation between the lock functions and the various +hooks therein. __acquire | @@ -128,6 +129,37 @@ points are the points we're contending with. The integer part of the time values is in us. +Dealing with nested locks, subclasses may appear: + +32............................................................................................................................................................................................... +33 +34 &rq->lock: 13128 13128 0.43 190.53 103881.26 97454 3453404 0.00 401.11 13224683.11 +35 --------- +36 &rq->lock 645 [] task_rq_lock+0x43/0x75 +37 &rq->lock 297 [] try_to_wake_up+0x127/0x25a +38 &rq->lock 360 [] select_task_rq_fair+0x1f0/0x74a +39 &rq->lock 428 [] scheduler_tick+0x46/0x1fb +40 --------- +41 &rq->lock 77 [] task_rq_lock+0x43/0x75 +42 &rq->lock 174 [] try_to_wake_up+0x127/0x25a +43 &rq->lock 4715 [] double_rq_lock+0x42/0x54 +44 &rq->lock 893 [] schedule+0x157/0x7b8 +45 +46............................................................................................................................................................................................... +47 +48 &rq->lock/1: 11526 11488 0.33 388.73 136294.31 21461 38404 0.00 37.93 109388.53 +49 ----------- +50 &rq->lock/1 11526 [] double_rq_lock+0x4f/0x54 +51 ----------- +52 &rq->lock/1 5645 [] double_rq_lock+0x42/0x54 +53 &rq->lock/1 1224 [] schedule+0x157/0x7b8 +54 &rq->lock/1 4336 [] double_rq_lock+0x4f/0x54 +55 &rq->lock/1 181 [] try_to_wake_up+0x127/0x25a + +Line 48 shows statistics for the second subclass (/1) of &rq->lock class +(subclass starts from 0), since in this case, as line 50 suggests, +double_rq_lock actually acquires a nested lock of two spinlocks. + View the top contending locks: # grep : /proc/lock_stat | head -- cgit v1.2.3 From f506b3dc0ec454a16d40cab9ee5d75435b39dc50 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 26 May 2011 17:02:53 +0200 Subject: perf: Fix SIGIO handling Vince noticed that unless we mmap() a buffer, SIGIO gets lost. So explicitly push the wakeup (including signals) when requested. Reported-by: Vince Weaver Signed-off-by: Peter Zijlstra Cc: Link: http://lkml.kernel.org/n/tip-2euus3f3x3dyvdk52cjxw8zu@git.kernel.org Signed-off-by: Ingo Molnar --- kernel/events/core.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/kernel/events/core.c b/kernel/events/core.c index c09767f7db3e..d863b3c057bb 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -5028,6 +5028,14 @@ static int __perf_event_overflow(struct perf_event *event, int nmi, else perf_event_output(event, nmi, data, regs); + if (event->fasync && event->pending_kill) { + if (nmi) { + event->pending_wakeup = 1; + irq_work_queue(&event->pending); + } else + perf_event_wakeup(event); + } + return ret; } -- cgit v1.2.3 From 55c2945aa9d4d907ec5ca4f6a4e30ae908d8d30d Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 11 May 2011 05:33:33 -0700 Subject: atomic: Add atomic_or() An atomic_or() function is needed by TREE_RCU to avoid deadlock, so add a generic version. Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- include/linux/atomic.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/include/linux/atomic.h b/include/linux/atomic.h index 96c038e43d66..ee456c79b0e6 100644 --- a/include/linux/atomic.h +++ b/include/linux/atomic.h @@ -34,4 +34,17 @@ static inline int atomic_inc_not_zero_hint(atomic_t *v, int hint) } #endif +#ifndef CONFIG_ARCH_HAS_ATOMIC_OR +static inline void atomic_or(int i, atomic_t *v) +{ + int old; + int new; + + do { + old = atomic_read(v); + new = old | i; + } while (atomic_cmpxchg(v, old, new) != old); +} +#endif /* #ifndef CONFIG_ARCH_HAS_ATOMIC_OR */ + #endif /* _LINUX_ATOMIC_H */ -- cgit v1.2.3 From 8826f3b0397562eee6f8785d548be9dfdb169100 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 11 May 2011 05:41:41 -0700 Subject: rcu: Avoid acquiring rcu_node locks in timer functions This commit switches manipulations of the rcu_node ->wakemask field to atomic operations, which allows rcu_cpu_kthread_timer() to avoid acquiring the rcu_node lock. This should avoid the following lockdep splat reported by Valdis Kletnieks: [ 12.872150] usb 1-4: new high speed USB device number 3 using ehci_hcd [ 12.986667] usb 1-4: New USB device found, idVendor=413c, idProduct=2513 [ 12.986679] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 12.987691] hub 1-4:1.0: USB hub found [ 12.987877] hub 1-4:1.0: 3 ports detected [ 12.996372] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input10 [ 13.071471] udevadm used greatest stack depth: 3984 bytes left [ 13.172129] [ 13.172130] ======================================================= [ 13.172425] [ INFO: possible circular locking dependency detected ] [ 13.172650] 2.6.39-rc6-mmotm0506 #1 [ 13.172773] ------------------------------------------------------- [ 13.172997] blkid/267 is trying to acquire lock: [ 13.173009] (&p->pi_lock){-.-.-.}, at: [] try_to_wake_up+0x29/0x1aa [ 13.173009] [ 13.173009] but task is already holding lock: [ 13.173009] (rcu_node_level_0){..-...}, at: [] rcu_cpu_kthread_timer+0x27/0x58 [ 13.173009] [ 13.173009] which lock already depends on the new lock. [ 13.173009] [ 13.173009] [ 13.173009] the existing dependency chain (in reverse order) is: [ 13.173009] [ 13.173009] -> #2 (rcu_node_level_0){..-...}: [ 13.173009] [] check_prevs_add+0x8b/0x104 [ 13.173009] [] validate_chain+0x36f/0x3ab [ 13.173009] [] __lock_acquire+0x369/0x3e2 [ 13.173009] [] lock_acquire+0xfc/0x14c [ 13.173009] [] _raw_spin_lock+0x36/0x45 [ 13.173009] [] rcu_read_unlock_special+0x8c/0x1d5 [ 13.173009] [] __rcu_read_unlock+0x4f/0xd7 [ 13.173009] [] rcu_read_unlock+0x21/0x23 [ 13.173009] [] cpuacct_charge+0x6c/0x75 [ 13.173009] [] update_curr+0x101/0x12e [ 13.173009] [] check_preempt_wakeup+0xf7/0x23b [ 13.173009] [] check_preempt_curr+0x2b/0x68 [ 13.173009] [] ttwu_do_wakeup+0x76/0x128 [ 13.173009] [] ttwu_do_activate.constprop.63+0x57/0x5c [ 13.173009] [] scheduler_ipi+0x48/0x5d [ 13.173009] [] smp_reschedule_interrupt+0x16/0x18 [ 13.173009] [] reschedule_interrupt+0x13/0x20 [ 13.173009] [] rcu_read_unlock+0x21/0x23 [ 13.173009] [] find_get_page+0xa9/0xb9 [ 13.173009] [] filemap_fault+0x6a/0x34d [ 13.173009] [] __do_fault+0x54/0x3e6 [ 13.173009] [] handle_pte_fault+0x12c/0x1ed [ 13.173009] [] handle_mm_fault+0x1cd/0x1e0 [ 13.173009] [] do_page_fault+0x42d/0x5de [ 13.173009] [] page_fault+0x1f/0x30 [ 13.173009] [ 13.173009] -> #1 (&rq->lock){-.-.-.}: [ 13.173009] [] check_prevs_add+0x8b/0x104 [ 13.173009] [] validate_chain+0x36f/0x3ab [ 13.173009] [] __lock_acquire+0x369/0x3e2 [ 13.173009] [] lock_acquire+0xfc/0x14c [ 13.173009] [] _raw_spin_lock+0x36/0x45 [ 13.173009] [] __task_rq_lock+0x8b/0xd3 [ 13.173009] [] wake_up_new_task+0x41/0x108 [ 13.173009] [] do_fork+0x265/0x33f [ 13.173009] [] kernel_thread+0x6b/0x6d [ 13.173009] [] rest_init+0x21/0xd2 [ 13.173009] [] start_kernel+0x3bb/0x3c6 [ 13.173009] [] x86_64_start_reservations+0xaf/0xb3 [ 13.173009] [] x86_64_start_kernel+0xf0/0xf7 [ 13.173009] [ 13.173009] -> #0 (&p->pi_lock){-.-.-.}: [ 13.173009] [] check_prev_add+0x68/0x20e [ 13.173009] [] check_prevs_add+0x8b/0x104 [ 13.173009] [] validate_chain+0x36f/0x3ab [ 13.173009] [] __lock_acquire+0x369/0x3e2 [ 13.173009] [] lock_acquire+0xfc/0x14c [ 13.173009] [] _raw_spin_lock_irqsave+0x44/0x57 [ 13.173009] [] try_to_wake_up+0x29/0x1aa [ 13.173009] [] wake_up_process+0x10/0x12 [ 13.173009] [] rcu_cpu_kthread_timer+0x44/0x58 [ 13.173009] [] call_timer_fn+0xac/0x1e9 [ 13.173009] [] run_timer_softirq+0x1aa/0x1f2 [ 13.173009] [] __do_softirq+0x109/0x26a [ 13.173009] [] call_softirq+0x1c/0x30 [ 13.173009] [] do_softirq+0x44/0xf1 [ 13.173009] [] irq_exit+0x58/0xc8 [ 13.173009] [] smp_apic_timer_interrupt+0x79/0x87 [ 13.173009] [] apic_timer_interrupt+0x13/0x20 [ 13.173009] [] get_page_from_freelist+0x2aa/0x310 [ 13.173009] [] __alloc_pages_nodemask+0x178/0x243 [ 13.173009] [] pte_alloc_one+0x1e/0x3a [ 13.173009] [] __pte_alloc+0x22/0x14b [ 13.173009] [] handle_mm_fault+0x17e/0x1e0 [ 13.173009] [] do_page_fault+0x42d/0x5de [ 13.173009] [] page_fault+0x1f/0x30 [ 13.173009] [ 13.173009] other info that might help us debug this: [ 13.173009] [ 13.173009] Chain exists of: [ 13.173009] &p->pi_lock --> &rq->lock --> rcu_node_level_0 [ 13.173009] [ 13.173009] Possible unsafe locking scenario: [ 13.173009] [ 13.173009] CPU0 CPU1 [ 13.173009] ---- ---- [ 13.173009] lock(rcu_node_level_0); [ 13.173009] lock(&rq->lock); [ 13.173009] lock(rcu_node_level_0); [ 13.173009] lock(&p->pi_lock); [ 13.173009] [ 13.173009] *** DEADLOCK *** [ 13.173009] [ 13.173009] 3 locks held by blkid/267: [ 13.173009] #0: (&mm->mmap_sem){++++++}, at: [] do_page_fault+0x1f3/0x5de [ 13.173009] #1: (&yield_timer){+.-...}, at: [] call_timer_fn+0x0/0x1e9 [ 13.173009] #2: (rcu_node_level_0){..-...}, at: [] rcu_cpu_kthread_timer+0x27/0x58 [ 13.173009] [ 13.173009] stack backtrace: [ 13.173009] Pid: 267, comm: blkid Not tainted 2.6.39-rc6-mmotm0506 #1 [ 13.173009] Call Trace: [ 13.173009] [] print_circular_bug+0xc8/0xd9 [ 13.173009] [] check_prev_add+0x68/0x20e [ 13.173009] [] ? save_stack_trace+0x28/0x46 [ 13.173009] [] check_prevs_add+0x8b/0x104 [ 13.173009] [] validate_chain+0x36f/0x3ab [ 13.173009] [] __lock_acquire+0x369/0x3e2 [ 13.173009] [] ? try_to_wake_up+0x29/0x1aa [ 13.173009] [] lock_acquire+0xfc/0x14c [ 13.173009] [] ? try_to_wake_up+0x29/0x1aa [ 13.173009] [] ? rcu_check_quiescent_state+0x82/0x82 [ 13.173009] [] _raw_spin_lock_irqsave+0x44/0x57 [ 13.173009] [] ? try_to_wake_up+0x29/0x1aa [ 13.173009] [] try_to_wake_up+0x29/0x1aa [ 13.173009] [] ? rcu_check_quiescent_state+0x82/0x82 [ 13.173009] [] wake_up_process+0x10/0x12 [ 13.173009] [] rcu_cpu_kthread_timer+0x44/0x58 [ 13.173009] [] ? rcu_check_quiescent_state+0x82/0x82 [ 13.173009] [] call_timer_fn+0xac/0x1e9 [ 13.173009] [] ? del_timer+0x75/0x75 [ 13.173009] [] ? rcu_check_quiescent_state+0x82/0x82 [ 13.173009] [] run_timer_softirq+0x1aa/0x1f2 [ 13.173009] [] __do_softirq+0x109/0x26a [ 13.173009] [] ? tick_dev_program_event+0x37/0xf6 [ 13.173009] [] ? time_hardirqs_off+0x1b/0x2f [ 13.173009] [] call_softirq+0x1c/0x30 [ 13.173009] [] do_softirq+0x44/0xf1 [ 13.173009] [] irq_exit+0x58/0xc8 [ 13.173009] [] smp_apic_timer_interrupt+0x79/0x87 [ 13.173009] [] apic_timer_interrupt+0x13/0x20 [ 13.173009] [] ? get_page_from_freelist+0x114/0x310 [ 13.173009] [] ? get_page_from_freelist+0x2aa/0x310 [ 13.173009] [] ? clear_page_c+0x7/0x10 [ 13.173009] [] ? prep_new_page+0x14c/0x1cd [ 13.173009] [] get_page_from_freelist+0x2aa/0x310 [ 13.173009] [] __alloc_pages_nodemask+0x178/0x243 [ 13.173009] [] ? __pmd_alloc+0x87/0x99 [ 13.173009] [] pte_alloc_one+0x1e/0x3a [ 13.173009] [] ? __pmd_alloc+0x87/0x99 [ 13.173009] [] __pte_alloc+0x22/0x14b [ 13.173009] [] handle_mm_fault+0x17e/0x1e0 [ 13.173009] [] do_page_fault+0x42d/0x5de [ 13.173009] [] ? sys_brk+0x32/0x10c [ 13.173009] [] ? time_hardirqs_off+0x1b/0x2f [ 13.173009] [] ? trace_hardirqs_off_caller+0x3f/0x9c [ 13.173009] [] ? trace_hardirqs_off_thunk+0x3a/0x3c [ 13.173009] [] page_fault+0x1f/0x30 [ 14.010075] usb 5-1: new full speed USB device number 2 using uhci_hcd Reported-by: Valdis Kletnieks Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- kernel/rcutree.c | 13 +++++-------- kernel/rcutree.h | 4 +++- 2 files changed, 8 insertions(+), 9 deletions(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 8154a4a3491c..5d96d68d20f8 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -36,7 +36,7 @@ #include #include #include -#include +#include #include #include #include @@ -1526,13 +1526,10 @@ static void rcu_cpu_kthread_setrt(int cpu, int to_rt) */ static void rcu_cpu_kthread_timer(unsigned long arg) { - unsigned long flags; struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, arg); struct rcu_node *rnp = rdp->mynode; - raw_spin_lock_irqsave(&rnp->lock, flags); - rnp->wakemask |= rdp->grpmask; - raw_spin_unlock_irqrestore(&rnp->lock, flags); + atomic_or(rdp->grpmask, &rnp->wakemask); invoke_rcu_node_kthread(rnp); } @@ -1680,11 +1677,11 @@ static int rcu_node_kthread(void *arg) for (;;) { rnp->node_kthread_status = RCU_KTHREAD_WAITING; - wait_event_interruptible(rnp->node_wq, rnp->wakemask != 0); + wait_event_interruptible(rnp->node_wq, + atomic_read(&rnp->wakemask) != 0); rnp->node_kthread_status = RCU_KTHREAD_RUNNING; raw_spin_lock_irqsave(&rnp->lock, flags); - mask = rnp->wakemask; - rnp->wakemask = 0; + mask = atomic_xchg(&rnp->wakemask, 0); rcu_initiate_boost(rnp, flags); /* releases rnp->lock. */ for (cpu = rnp->grplo; cpu <= rnp->grphi; cpu++, mask >>= 1) { if ((mask & 0x1) == 0) diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 93d4a1c2e88b..561dcb9a8d2c 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -119,7 +119,9 @@ struct rcu_node { /* elements that need to drain to allow the */ /* current expedited grace period to */ /* complete (only for TREE_PREEMPT_RCU). */ - unsigned long wakemask; /* CPUs whose kthread needs to be awakened. */ + atomic_t wakemask; /* CPUs whose kthread needs to be awakened. */ + /* Since this has meaning only for leaf */ + /* rcu_node structures, 32 bits suffices. */ unsigned long qsmaskinit; /* Per-GP initial value for qsmask & expmask. */ unsigned long grpmask; /* Mask to apply to parent qsmask. */ -- cgit v1.2.3 From 08bca60a6912ad225254250c0a9c3a05b4152cfa Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 20 May 2011 16:06:29 -0700 Subject: rcu: Remove waitqueue usage for cpu, node, and boost kthreads It is not necessary to use waitqueues for the RCU kthreads because we always know exactly which thread is to be awakened. In addition, wake_up() only issues an actual wakeup when there is a thread waiting on the queue, which was why there was an extra explicit wake_up_process() to get the RCU kthreads started. Eliminating the waitqueues (and wake_up()) in favor of wake_up_process() eliminates the need for the initial wake_up_process() and also shrinks the data structure size a bit. The wakeup logic is placed in a new rcu_wait() macro. Signed-off-by: Peter Zijlstra Signed-off-by: Paul E. McKenney Signed-off-by: Ingo Molnar --- kernel/rcutree.c | 23 ++++++----------------- kernel/rcutree.h | 17 ++++++++++------- kernel/rcutree_plugin.h | 16 +--------------- 3 files changed, 17 insertions(+), 39 deletions(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 5d96d68d20f8..05e254e930e3 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -95,7 +95,6 @@ static DEFINE_PER_CPU(struct task_struct *, rcu_cpu_kthread_task); DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status); DEFINE_PER_CPU(int, rcu_cpu_kthread_cpu); DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops); -static DEFINE_PER_CPU(wait_queue_head_t, rcu_cpu_wq); DEFINE_PER_CPU(char, rcu_cpu_has_work); static char rcu_kthreads_spawnable; @@ -1476,7 +1475,7 @@ static void invoke_rcu_cpu_kthread(void) local_irq_restore(flags); return; } - wake_up(&__get_cpu_var(rcu_cpu_wq)); + wake_up_process(__this_cpu_read(rcu_cpu_kthread_task)); local_irq_restore(flags); } @@ -1596,14 +1595,12 @@ static int rcu_cpu_kthread(void *arg) unsigned long flags; int spincnt = 0; unsigned int *statusp = &per_cpu(rcu_cpu_kthread_status, cpu); - wait_queue_head_t *wqp = &per_cpu(rcu_cpu_wq, cpu); char work; char *workp = &per_cpu(rcu_cpu_has_work, cpu); for (;;) { *statusp = RCU_KTHREAD_WAITING; - wait_event_interruptible(*wqp, - *workp != 0 || kthread_should_stop()); + rcu_wait(*workp != 0 || kthread_should_stop()); local_bh_disable(); if (rcu_cpu_kthread_should_stop(cpu)) { local_bh_enable(); @@ -1654,7 +1651,6 @@ static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu) per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu; WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL); per_cpu(rcu_cpu_kthread_task, cpu) = t; - wake_up_process(t); sp.sched_priority = RCU_KTHREAD_PRIO; sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); return 0; @@ -1677,8 +1673,7 @@ static int rcu_node_kthread(void *arg) for (;;) { rnp->node_kthread_status = RCU_KTHREAD_WAITING; - wait_event_interruptible(rnp->node_wq, - atomic_read(&rnp->wakemask) != 0); + rcu_wait(atomic_read(&rnp->wakemask) != 0); rnp->node_kthread_status = RCU_KTHREAD_RUNNING; raw_spin_lock_irqsave(&rnp->lock, flags); mask = atomic_xchg(&rnp->wakemask, 0); @@ -1762,7 +1757,6 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp, raw_spin_lock_irqsave(&rnp->lock, flags); rnp->node_kthread_task = t; raw_spin_unlock_irqrestore(&rnp->lock, flags); - wake_up_process(t); sp.sched_priority = 99; sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); } @@ -1779,21 +1773,16 @@ static int __init rcu_spawn_kthreads(void) rcu_kthreads_spawnable = 1; for_each_possible_cpu(cpu) { - init_waitqueue_head(&per_cpu(rcu_cpu_wq, cpu)); per_cpu(rcu_cpu_has_work, cpu) = 0; if (cpu_online(cpu)) (void)rcu_spawn_one_cpu_kthread(cpu); } rnp = rcu_get_root(rcu_state); - init_waitqueue_head(&rnp->node_wq); - rcu_init_boost_waitqueue(rnp); (void)rcu_spawn_one_node_kthread(rcu_state, rnp); - if (NUM_RCU_NODES > 1) - rcu_for_each_leaf_node(rcu_state, rnp) { - init_waitqueue_head(&rnp->node_wq); - rcu_init_boost_waitqueue(rnp); + if (NUM_RCU_NODES > 1) { + rcu_for_each_leaf_node(rcu_state, rnp) (void)rcu_spawn_one_node_kthread(rcu_state, rnp); - } + } return 0; } early_initcall(rcu_spawn_kthreads); diff --git a/kernel/rcutree.h b/kernel/rcutree.h index 561dcb9a8d2c..7b9a08b4aaea 100644 --- a/kernel/rcutree.h +++ b/kernel/rcutree.h @@ -159,9 +159,6 @@ struct rcu_node { struct task_struct *boost_kthread_task; /* kthread that takes care of priority */ /* boosting for this rcu_node structure. */ - wait_queue_head_t boost_wq; - /* Wait queue on which to park the boost */ - /* kthread. */ unsigned int boost_kthread_status; /* State of boost_kthread_task for tracing. */ unsigned long n_tasks_boosted; @@ -188,9 +185,6 @@ struct rcu_node { /* kthread that takes care of this rcu_node */ /* structure, for example, awakening the */ /* per-CPU kthreads as needed. */ - wait_queue_head_t node_wq; - /* Wait queue on which to park the per-node */ - /* kthread. */ unsigned int node_kthread_status; /* State of node_kthread_task for tracing. */ } ____cacheline_internodealigned_in_smp; @@ -336,6 +330,16 @@ struct rcu_data { /* scheduling clock irq */ /* before ratting on them. */ +#define rcu_wait(cond) \ +do { \ + for (;;) { \ + set_current_state(TASK_INTERRUPTIBLE); \ + if (cond) \ + break; \ + schedule(); \ + } \ + __set_current_state(TASK_RUNNING); \ +} while (0) /* * RCU global state, including node hierarchy. This hierarchy is @@ -445,7 +449,6 @@ static void __cpuinit rcu_preempt_init_percpu_data(int cpu); static void rcu_preempt_send_cbs_to_online(void); static void __init __rcu_init_preempt(void); static void rcu_needs_cpu_flush(void); -static void __init rcu_init_boost_waitqueue(struct rcu_node *rnp); static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags); static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, cpumask_var_t cm); diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index ed339702481d..049f2787a984 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1196,8 +1196,7 @@ static int rcu_boost_kthread(void *arg) for (;;) { rnp->boost_kthread_status = RCU_KTHREAD_WAITING; - wait_event_interruptible(rnp->boost_wq, rnp->boost_tasks || - rnp->exp_tasks); + rcu_wait(rnp->boost_tasks || rnp->exp_tasks); rnp->boost_kthread_status = RCU_KTHREAD_RUNNING; more2boost = rcu_boost(rnp); if (more2boost) @@ -1274,14 +1273,6 @@ static void rcu_preempt_boost_start_gp(struct rcu_node *rnp) rnp->boost_time = jiffies + RCU_BOOST_DELAY_JIFFIES; } -/* - * Initialize the RCU-boost waitqueue. - */ -static void __init rcu_init_boost_waitqueue(struct rcu_node *rnp) -{ - init_waitqueue_head(&rnp->boost_wq); -} - /* * Create an RCU-boost kthread for the specified node if one does not * already exist. We only create this kthread for preemptible RCU. @@ -1306,7 +1297,6 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, raw_spin_lock_irqsave(&rnp->lock, flags); rnp->boost_kthread_task = t; raw_spin_unlock_irqrestore(&rnp->lock, flags); - wake_up_process(t); sp.sched_priority = RCU_KTHREAD_PRIO; sched_setscheduler_nocheck(t, SCHED_FIFO, &sp); return 0; @@ -1328,10 +1318,6 @@ static void rcu_preempt_boost_start_gp(struct rcu_node *rnp) { } -static void __init rcu_init_boost_waitqueue(struct rcu_node *rnp) -{ -} - static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, struct rcu_node *rnp, int rnp_index) -- cgit v1.2.3 From cc3ce5176d83cd8ae1134f86e208ea758d6cb78e Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Wed, 25 May 2011 13:42:06 -0700 Subject: rcu: Start RCU kthreads in TASK_INTERRUPTIBLE state Upon creation, kthreads are in TASK_UNINTERRUPTIBLE state, which can result in softlockup warnings. Because some of RCU's kthreads can legitimately be idle indefinitely, start them in TASK_INTERRUPTIBLE state in order to avoid those warnings. Suggested-by: Peter Zijlstra Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney Tested-by: Yinghai Lu Signed-off-by: Ingo Molnar --- kernel/rcutree.c | 2 ++ kernel/rcutree_plugin.h | 1 + 2 files changed, 3 insertions(+) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 05e254e930e3..77a7671dd147 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1648,6 +1648,7 @@ static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu) if (IS_ERR(t)) return PTR_ERR(t); kthread_bind(t, cpu); + set_task_state(t, TASK_INTERRUPTIBLE); per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu; WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL); per_cpu(rcu_cpu_kthread_task, cpu) = t; @@ -1755,6 +1756,7 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp, if (IS_ERR(t)) return PTR_ERR(t); raw_spin_lock_irqsave(&rnp->lock, flags); + set_task_state(t, TASK_INTERRUPTIBLE); rnp->node_kthread_task = t; raw_spin_unlock_irqrestore(&rnp->lock, flags); sp.sched_priority = 99; diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index 049f2787a984..a767b7dac365 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1295,6 +1295,7 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, if (IS_ERR(t)) return PTR_ERR(t); raw_spin_lock_irqsave(&rnp->lock, flags); + set_task_state(t, TASK_INTERRUPTIBLE); rnp->boost_kthread_task = t; raw_spin_unlock_irqrestore(&rnp->lock, flags); sp.sched_priority = RCU_KTHREAD_PRIO; -- cgit v1.2.3 From 69b4573296469fd3f70cf7044693074980517067 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Sat, 28 May 2011 08:25:51 -0700 Subject: Cache xattr security drop check for write v2 Some recent benchmarking on btrfs showed that a major scaling bottleneck on large systems on btrfs is currently the xattr lookup on every write. Why xattr lookup on every write I hear you ask? write wants to drop suid and security related xattrs that could set o capabilities for executables. To do that it currently looks up security.capability on EVERY write (even for non executables) to decide whether to drop it or not. In btrfs this causes an additional tree walk, hitting some per file system locks and quite bad scalability. In a simple read workload on a 8S system I saw over 90% CPU time in spinlocks related to that. Chris Mason tells me this is also a problem in ext4, where it hits the global mbcache lock. This patch adds a simple per inode to avoid this problem. We only do the lookup once per file and then if there is no xattr cache the decision. All xattr changes clear the flag. I also used the same flag to avoid the suid check, although that one is pretty cheap. A file system can also set this flag when it creates the inode, if it has a cheap way to do so. This is done for some common file systems in followon patches. With this patch a major part of the lock contention disappears for btrfs. Some testing on smaller systems didn't show significant performance changes, but at least it helps the larger systems and is generally more efficient. v2: Rename is_sgid. add file system helper. Cc: chris.mason@oracle.com Cc: josef@redhat.com Cc: viro@zeniv.linux.org.uk Cc: agruen@linbit.com Cc: Serge E. Hallyn Signed-off-by: Andi Kleen Signed-off-by: Al Viro --- fs/attr.c | 7 +++++++ fs/xattr.c | 7 +++++-- include/linux/fs.h | 13 +++++++++++++ mm/filemap.c | 14 ++++++++++++-- 4 files changed, 37 insertions(+), 4 deletions(-) diff --git a/fs/attr.c b/fs/attr.c index 91dbe2a107f2..caf2aa521e2b 100644 --- a/fs/attr.c +++ b/fs/attr.c @@ -175,6 +175,13 @@ int notify_change(struct dentry * dentry, struct iattr * attr) return -EPERM; } + if ((ia_valid & ATTR_MODE)) { + mode_t amode = attr->ia_mode; + /* Flag setting protected by i_mutex */ + if (is_sxid(amode)) + inode->i_flags &= ~S_NOSEC; + } + now = current_fs_time(inode->i_sb); attr->ia_ctime = now; diff --git a/fs/xattr.c b/fs/xattr.c index 4be2e7666d02..f060663ab70c 100644 --- a/fs/xattr.c +++ b/fs/xattr.c @@ -91,7 +91,11 @@ int __vfs_setxattr_noperm(struct dentry *dentry, const char *name, { struct inode *inode = dentry->d_inode; int error = -EOPNOTSUPP; + int issec = !strncmp(name, XATTR_SECURITY_PREFIX, + XATTR_SECURITY_PREFIX_LEN); + if (issec) + inode->i_flags &= ~S_NOSEC; if (inode->i_op->setxattr) { error = inode->i_op->setxattr(dentry, name, value, size, flags); if (!error) { @@ -99,8 +103,7 @@ int __vfs_setxattr_noperm(struct dentry *dentry, const char *name, security_inode_post_setxattr(dentry, name, value, size, flags); } - } else if (!strncmp(name, XATTR_SECURITY_PREFIX, - XATTR_SECURITY_PREFIX_LEN)) { + } else if (issec) { const char *suffix = name + XATTR_SECURITY_PREFIX_LEN; error = security_inode_setsecurity(inode, suffix, value, size, flags); diff --git a/include/linux/fs.h b/include/linux/fs.h index 573028df050d..c55d6b7cd5d6 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -237,6 +237,7 @@ struct inodes_stat_t { #define S_PRIVATE 512 /* Inode is fs-internal */ #define S_IMA 1024 /* Inode has an associated IMA struct */ #define S_AUTOMOUNT 2048 /* Automount/referral quasi-directory */ +#define S_NOSEC 4096 /* no suid or xattr security attributes */ /* * Note that nosuid etc flags are inode-specific: setting some file-system @@ -273,6 +274,7 @@ struct inodes_stat_t { #define IS_PRIVATE(inode) ((inode)->i_flags & S_PRIVATE) #define IS_IMA(inode) ((inode)->i_flags & S_IMA) #define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT) +#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC) /* the read-only stuff doesn't really belong here, but any other place is probably as bad and I don't want to create yet another include file. */ @@ -2582,5 +2584,16 @@ int __init get_filesystem_list(char *buf); #define OPEN_FMODE(flag) ((__force fmode_t)(((flag + 1) & O_ACCMODE) | \ (flag & __FMODE_NONOTIFY))) +static inline int is_sxid(mode_t mode) +{ + return (mode & S_ISUID) || ((mode & S_ISGID) && (mode & S_IXGRP)); +} + +static inline void inode_has_no_xattr(struct inode *inode) +{ + if (!is_sxid(inode->i_mode)) + inode->i_flags |= S_NOSEC; +} + #endif /* __KERNEL__ */ #endif /* _LINUX_FS_H */ diff --git a/mm/filemap.c b/mm/filemap.c index dac95a24deac..d7b10578a64b 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1982,16 +1982,26 @@ static int __remove_suid(struct dentry *dentry, int kill) int file_remove_suid(struct file *file) { struct dentry *dentry = file->f_path.dentry; - int killsuid = should_remove_suid(dentry); - int killpriv = security_inode_need_killpriv(dentry); + struct inode *inode = dentry->d_inode; + int killsuid; + int killpriv; int error = 0; + /* Fast path for nothing security related */ + if (IS_NOSEC(inode)) + return 0; + + killsuid = should_remove_suid(dentry); + killpriv = security_inode_need_killpriv(dentry); + if (killpriv < 0) return killpriv; if (killpriv) error = security_inode_killpriv(dentry); if (!error && killsuid) error = __remove_suid(dentry, killsuid); + if (!error) + inode->i_flags |= S_NOSEC; return error; } -- cgit v1.2.3 From 7b21fddd087678a70ad64afc0f632e0f1071b092 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 27 May 2011 19:28:27 -0700 Subject: ns: Wire up the setns system call MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 32bit and 64bit on x86 are tested and working. The rest I have looked at closely and I can't find any problems. setns is an easy system call to wire up. It just takes two ints so I don't expect any weird architecture porting problems. While doing this I have noticed that we have some architectures that are very slow to get new system calls. cris seems to be the slowest where the last system calls wired up were preadv and pwritev. avr32 is weird in that recvmmsg was wired up but never declared in unistd.h. frv is behind with perf_event_open being the last syscall wired up. On h8300 the last system call wired up was epoll_wait. On m32r the last system call wired up was fallocate. mn10300 has recvmmsg as the last system call wired up. The rest seem to at least have syncfs wired up which was new in the 2.6.39. v2: Most of the architecture support added by Daniel Lezcano v3: ported to v2.6.36-rc4 by: Eric W. Biederman v4: Moved wiring up of the system call to another patch v5: ported to v2.6.39-rc6 v6: rebased onto parisc-next and net-next to avoid syscall conflicts. v7: ported to Linus's latest post 2.6.39 tree. >  arch/blackfin/include/asm/unistd.h     |    3 ++- >  arch/blackfin/mach-common/entry.S      |    1 + Acked-by: Mike Frysinger Oh - ia64 wiring looks good. Acked-by: Tony Luck Signed-off-by: Eric W. Biederman Signed-off-by: Linus Torvalds --- arch/alpha/include/asm/unistd.h | 3 ++- arch/alpha/kernel/systbls.S | 1 + arch/arm/include/asm/unistd.h | 1 + arch/arm/kernel/calls.S | 1 + arch/avr32/include/asm/unistd.h | 3 ++- arch/avr32/kernel/syscall_table.S | 1 + arch/blackfin/include/asm/unistd.h | 3 ++- arch/blackfin/mach-common/entry.S | 1 + arch/cris/arch-v10/kernel/entry.S | 1 + arch/cris/arch-v32/kernel/entry.S | 1 + arch/cris/include/asm/unistd.h | 3 ++- arch/frv/include/asm/unistd.h | 3 ++- arch/frv/kernel/entry.S | 1 + arch/h8300/include/asm/unistd.h | 3 ++- arch/h8300/kernel/syscalls.S | 1 + arch/ia64/include/asm/unistd.h | 3 ++- arch/ia64/kernel/entry.S | 1 + arch/m32r/include/asm/unistd.h | 3 ++- arch/m32r/kernel/syscall_table.S | 1 + arch/m68k/include/asm/unistd.h | 3 ++- arch/m68k/kernel/syscalltable.S | 1 + arch/microblaze/include/asm/unistd.h | 3 ++- arch/microblaze/kernel/syscall_table.S | 1 + arch/mips/include/asm/unistd.h | 15 +++++++++------ arch/mips/kernel/scall32-o32.S | 1 + arch/mips/kernel/scall64-64.S | 1 + arch/mips/kernel/scall64-n32.S | 1 + arch/mips/kernel/scall64-o32.S | 1 + arch/mn10300/include/asm/unistd.h | 3 ++- arch/mn10300/kernel/entry.S | 1 + arch/parisc/include/asm/unistd.h | 3 ++- arch/parisc/kernel/syscall_table.S | 1 + arch/powerpc/include/asm/systbl.h | 1 + arch/powerpc/include/asm/unistd.h | 3 ++- arch/s390/include/asm/unistd.h | 3 ++- arch/s390/kernel/compat_wrapper.S | 6 ++++++ arch/s390/kernel/syscalls.S | 1 + arch/sh/include/asm/unistd_32.h | 3 ++- arch/sh/include/asm/unistd_64.h | 3 ++- arch/sh/kernel/syscalls_32.S | 1 + arch/sh/kernel/syscalls_64.S | 1 + arch/sparc/include/asm/unistd.h | 3 ++- arch/sparc/kernel/systbls_32.S | 2 +- arch/sparc/kernel/systbls_64.S | 4 ++-- arch/x86/ia32/ia32entry.S | 1 + arch/x86/include/asm/unistd_32.h | 3 ++- arch/x86/include/asm/unistd_64.h | 2 ++ arch/x86/kernel/syscall_table_32.S | 1 + arch/xtensa/include/asm/unistd.h | 4 +++- include/asm-generic/unistd.h | 4 +++- 50 files changed, 87 insertions(+), 29 deletions(-) diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index b1834166922d..4ac48a095f3a 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -456,10 +456,11 @@ #define __NR_open_by_handle_at 498 #define __NR_clock_adjtime 499 #define __NR_syncfs 500 +#define __NR_setns 501 #ifdef __KERNEL__ -#define NR_SYSCALLS 501 +#define NR_SYSCALLS 502 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 15f999d41c75..b9c28f3f1956 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -519,6 +519,7 @@ sys_call_table: .quad sys_open_by_handle_at .quad sys_clock_adjtime .quad sys_syncfs /* 500 */ + .quad sys_setns .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 87dbe3e21970..0c5fc55ad800 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -400,6 +400,7 @@ #define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) #define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) #define __NR_syncfs (__NR_SYSCALL_BASE+373) +#define __NR_setns (__NR_SYSCALL_BASE+374) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 7fbf28c35bb2..a05f75928bea 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -383,6 +383,7 @@ CALL(sys_open_by_handle_at) CALL(sys_clock_adjtime) CALL(sys_syncfs) + CALL(sys_setns) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/avr32/include/asm/unistd.h b/arch/avr32/include/asm/unistd.h index 89861a27543e..f714544e5560 100644 --- a/arch/avr32/include/asm/unistd.h +++ b/arch/avr32/include/asm/unistd.h @@ -299,9 +299,10 @@ #define __NR_signalfd 279 /* 280 was __NR_timerfd */ #define __NR_eventfd 281 +#define __NR_setns 283 #ifdef __KERNEL__ -#define NR_syscalls 282 +#define NR_syscalls 284 /* Old stuff */ #define __IGNORE_uselib diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index e76bad16b0f0..c7fd394d28a4 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -296,4 +296,5 @@ sys_call_table: .long sys_ni_syscall /* 280, was sys_timerfd */ .long sys_eventfd .long sys_recvmmsg + .long sys_setns .long sys_ni_syscall /* r8 is saturated at nr_syscalls */ diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index ff9a9f35d50b..6ff9c411b145 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -397,8 +397,9 @@ #define __NR_open_by_handle_at 376 #define __NR_clock_adjtime 377 #define __NR_syncfs 378 +#define __NR_setns 379 -#define __NR_syscall 379 +#define __NR_syscall 380 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index f96933f48a7f..dda11ef06be5 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1753,6 +1753,7 @@ ENTRY(_sys_call_table) .long _sys_open_by_handle_at .long _sys_clock_adjtime .long _sys_syncfs + .long _sys_setns .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S index 0d6420d087fd..1161883eb582 100644 --- a/arch/cris/arch-v10/kernel/entry.S +++ b/arch/cris/arch-v10/kernel/entry.S @@ -937,6 +937,7 @@ sys_call_table: .long sys_inotify_init1 .long sys_preadv .long sys_pwritev + .long sys_setns /* 335 */ /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S index 3abf12c23e5f..84fed7e91ada 100644 --- a/arch/cris/arch-v32/kernel/entry.S +++ b/arch/cris/arch-v32/kernel/entry.S @@ -880,6 +880,7 @@ sys_call_table: .long sys_inotify_init1 .long sys_preadv .long sys_pwritev + .long sys_setns /* 335 */ /* * NOTE!! This doesn't have to be exact - we just have diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h index f6fad83b3a8c..f921b8b0f97e 100644 --- a/arch/cris/include/asm/unistd.h +++ b/arch/cris/include/asm/unistd.h @@ -339,10 +339,11 @@ #define __NR_inotify_init1 332 #define __NR_preadv 333 #define __NR_pwritev 334 +#define __NR_setns 335 #ifdef __KERNEL__ -#define NR_syscalls 335 +#define NR_syscalls 336 #include diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h index b28da499e22a..a569dff7cd59 100644 --- a/arch/frv/include/asm/unistd.h +++ b/arch/frv/include/asm/unistd.h @@ -343,10 +343,11 @@ #define __NR_pwritev 334 #define __NR_rt_tgsigqueueinfo 335 #define __NR_perf_event_open 336 +#define __NR_setns 337 #ifdef __KERNEL__ -#define NR_syscalls 337 +#define NR_syscalls 338 #define __ARCH_WANT_IPC_PARSE_VERSION /* #define __ARCH_WANT_OLD_READDIR */ diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S index 63d579bf1c29..017d6d7b784f 100644 --- a/arch/frv/kernel/entry.S +++ b/arch/frv/kernel/entry.S @@ -1526,5 +1526,6 @@ sys_call_table: .long sys_pwritev .long sys_rt_tgsigqueueinfo /* 335 */ .long sys_perf_event_open + .long sys_setns syscall_table_size = (. - sys_call_table) diff --git a/arch/h8300/include/asm/unistd.h b/arch/h8300/include/asm/unistd.h index 50f2c5a36591..2c3f8e60b1e0 100644 --- a/arch/h8300/include/asm/unistd.h +++ b/arch/h8300/include/asm/unistd.h @@ -325,10 +325,11 @@ #define __NR_move_pages 317 #define __NR_getcpu 318 #define __NR_epoll_pwait 319 +#define __NR_setns 320 #ifdef __KERNEL__ -#define NR_syscalls 320 +#define NR_syscalls 321 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/h8300/kernel/syscalls.S b/arch/h8300/kernel/syscalls.S index faefaff7d43d..f4b2e67bcc34 100644 --- a/arch/h8300/kernel/syscalls.S +++ b/arch/h8300/kernel/syscalls.S @@ -333,6 +333,7 @@ SYMBOL_NAME_LABEL(sys_call_table) .long SYMBOL_NAME(sys_ni_syscall) /* sys_move_pages */ .long SYMBOL_NAME(sys_getcpu) .long SYMBOL_NAME(sys_ni_syscall) /* sys_epoll_pwait */ + .long SYMBOL_NAME(sys_setns) /* 320 */ .macro call_sp addr mov.l #SYMBOL_NAME(\addr),er6 diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 404d037c5e10..1cf0f496f744 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -319,11 +319,12 @@ #define __NR_open_by_handle_at 1327 #define __NR_clock_adjtime 1328 #define __NR_syncfs 1329 +#define __NR_setns 1330 #ifdef __KERNEL__ -#define NR_syscalls 306 /* length of syscall table */ +#define NR_syscalls 307 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 6de2e23b3636..9ca80193cd4e 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1775,6 +1775,7 @@ sys_call_table: data8 sys_open_by_handle_at data8 sys_clock_adjtime data8 sys_syncfs + data8 sys_setns // 1330 .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */ diff --git a/arch/m32r/include/asm/unistd.h b/arch/m32r/include/asm/unistd.h index c70545689da8..3e1db561aacc 100644 --- a/arch/m32r/include/asm/unistd.h +++ b/arch/m32r/include/asm/unistd.h @@ -330,10 +330,11 @@ /* #define __NR_timerfd 322 removed */ #define __NR_eventfd 323 #define __NR_fallocate 324 +#define __NR_setns 325 #ifdef __KERNEL__ -#define NR_syscalls 325 +#define NR_syscalls 326 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_STAT64 diff --git a/arch/m32r/kernel/syscall_table.S b/arch/m32r/kernel/syscall_table.S index 60536e271233..528f2e6ad064 100644 --- a/arch/m32r/kernel/syscall_table.S +++ b/arch/m32r/kernel/syscall_table.S @@ -324,3 +324,4 @@ ENTRY(sys_call_table) .long sys_ni_syscall .long sys_eventfd .long sys_fallocate + .long sys_setns /* 325 */ diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index f3b649de2a1b..43f984e93970 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -349,10 +349,11 @@ #define __NR_open_by_handle_at 341 #define __NR_clock_adjtime 342 #define __NR_syncfs 343 +#define __NR_setns 344 #ifdef __KERNEL__ -#define NR_syscalls 344 +#define NR_syscalls 345 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 6f7b09122a00..00d1452f9571 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -364,4 +364,5 @@ ENTRY(sys_call_table) .long sys_open_by_handle_at .long sys_clock_adjtime .long sys_syncfs + .long sys_setns diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h index 30edd61a6b8f..7d7092b917ac 100644 --- a/arch/microblaze/include/asm/unistd.h +++ b/arch/microblaze/include/asm/unistd.h @@ -390,8 +390,9 @@ #define __NR_open_by_handle_at 372 #define __NR_clock_adjtime 373 #define __NR_syncfs 374 +#define __NR_setns 375 -#define __NR_syscalls 375 +#define __NR_syscalls 376 #ifdef __KERNEL__ #ifndef __ASSEMBLY__ diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S index 85cea81d1ca1..d915a122c865 100644 --- a/arch/microblaze/kernel/syscall_table.S +++ b/arch/microblaze/kernel/syscall_table.S @@ -379,3 +379,4 @@ ENTRY(sys_call_table) .long sys_open_by_handle_at .long sys_clock_adjtime .long sys_syncfs + .long sys_setns /* 375 */ diff --git a/arch/mips/include/asm/unistd.h b/arch/mips/include/asm/unistd.h index fa2e37ea2be1..6fcfc480e9d0 100644 --- a/arch/mips/include/asm/unistd.h +++ b/arch/mips/include/asm/unistd.h @@ -363,16 +363,17 @@ #define __NR_open_by_handle_at (__NR_Linux + 340) #define __NR_clock_adjtime (__NR_Linux + 341) #define __NR_syncfs (__NR_Linux + 342) +#define __NR_setns (__NR_Linux + 343) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 342 +#define __NR_Linux_syscalls 343 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 342 +#define __NR_O32_Linux_syscalls 343 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -682,16 +683,17 @@ #define __NR_open_by_handle_at (__NR_Linux + 299) #define __NR_clock_adjtime (__NR_Linux + 300) #define __NR_syncfs (__NR_Linux + 301) +#define __NR_setns (__NR_Linux + 302) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 301 +#define __NR_Linux_syscalls 302 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 301 +#define __NR_64_Linux_syscalls 302 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1006,16 +1008,17 @@ #define __NR_open_by_handle_at (__NR_Linux + 304) #define __NR_clock_adjtime (__NR_Linux + 305) #define __NR_syncfs (__NR_Linux + 306) +#define __NR_setns (__NR_Linux + 307) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 306 +#define __NR_Linux_syscalls 307 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 306 +#define __NR_N32_Linux_syscalls 307 #ifdef __KERNEL__ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 7a8e1dd7f6f2..99e656e425f3 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -589,6 +589,7 @@ einval: li v0, -ENOSYS sys sys_open_by_handle_at 3 /* 4340 */ sys sys_clock_adjtime 2 sys sys_syncfs 1 + sys sys_setns 2 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 2d31c83224f9..fb0575f47f3d 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -428,4 +428,5 @@ sys_call_table: PTR sys_open_by_handle_at PTR sys_clock_adjtime /* 5300 */ PTR sys_syncfs + PTR sys_setns .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 38a0503b9a4a..4de0c5534e73 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -428,4 +428,5 @@ EXPORT(sysn32_call_table) PTR sys_open_by_handle_at PTR compat_sys_clock_adjtime /* 6305 */ PTR sys_syncfs + PTR sys_setns .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 91ea5e4041dd..4a387de08bfa 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -546,4 +546,5 @@ sys_call_table: PTR compat_sys_open_by_handle_at /* 4340 */ PTR compat_sys_clock_adjtime PTR sys_syncfs + PTR sys_setns .size sys_call_table,.-sys_call_table diff --git a/arch/mn10300/include/asm/unistd.h b/arch/mn10300/include/asm/unistd.h index 9d056f515929..9051f921cbc7 100644 --- a/arch/mn10300/include/asm/unistd.h +++ b/arch/mn10300/include/asm/unistd.h @@ -349,10 +349,11 @@ #define __NR_rt_tgsigqueueinfo 336 #define __NR_perf_event_open 337 #define __NR_recvmmsg 338 +#define __NR_setns 339 #ifdef __KERNEL__ -#define NR_syscalls 339 +#define NR_syscalls 340 /* * specify the deprecated syscalls we want to support on this arch diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S index fb93ad720b82..ae435e1d5669 100644 --- a/arch/mn10300/kernel/entry.S +++ b/arch/mn10300/kernel/entry.S @@ -759,6 +759,7 @@ ENTRY(sys_call_table) .long sys_rt_tgsigqueueinfo .long sys_perf_event_open .long sys_recvmmsg + .long sys_setns nr_syscalls=(.-sys_call_table)/4 diff --git a/arch/parisc/include/asm/unistd.h b/arch/parisc/include/asm/unistd.h index 9cbc2c3bf630..3392de3e7be0 100644 --- a/arch/parisc/include/asm/unistd.h +++ b/arch/parisc/include/asm/unistd.h @@ -820,8 +820,9 @@ #define __NR_name_to_handle_at (__NR_Linux + 325) #define __NR_open_by_handle_at (__NR_Linux + 326) #define __NR_syncfs (__NR_Linux + 327) +#define __NR_setns (__NR_Linux + 328) -#define __NR_Linux_syscalls (__NR_syncfs + 1) +#define __NR_Linux_syscalls (__NR_setns + 1) #define __IGNORE_select /* newselect */ diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index a5b02ce4d41e..34a4f5a2fffb 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -426,6 +426,7 @@ ENTRY_SAME(name_to_handle_at) /* 325 */ ENTRY_COMP(open_by_handle_at) ENTRY_SAME(syncfs) + ENTRY_SAME(setns) /* Nothing yet */ diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index 8489d372077f..f6736b7da463 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -353,3 +353,4 @@ COMPAT_SYS_SPU(open_by_handle_at) COMPAT_SYS_SPU(clock_adjtime) SYSCALL_SPU(syncfs) COMPAT_SYS_SPU(sendmmsg) +SYSCALL_SPU(setns) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index 6d23c8193caa..b8b3f599362b 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -372,10 +372,11 @@ #define __NR_clock_adjtime 347 #define __NR_syncfs 348 #define __NR_sendmmsg 349 +#define __NR_setns 350 #ifdef __KERNEL__ -#define __NR_syscalls 350 +#define __NR_syscalls 351 #define __NR__exit __NR_exit #define NR_syscalls __NR_syscalls diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h index 9208e69245a0..404bdb9671b4 100644 --- a/arch/s390/include/asm/unistd.h +++ b/arch/s390/include/asm/unistd.h @@ -276,7 +276,8 @@ #define __NR_open_by_handle_at 336 #define __NR_clock_adjtime 337 #define __NR_syncfs 338 -#define NR_syscalls 339 +#define __NR_setns 339 +#define NR_syscalls 340 /* * There are some system calls that are not present on 64 bit, some diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 1dc96ea08fa8..1f5eb789c3a7 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1904,3 +1904,9 @@ compat_sys_clock_adjtime_wrapper: sys_syncfs_wrapper: lgfr %r2,%r2 # int jg sys_syncfs + + .globl sys_setns_wrapper +sys_setns_wrapper: + lgfr %r2,%r2 # int + lgfr %r3,%r3 # int + jg sys_setns diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 9c65fd4ddce0..6ee39ef8fe4a 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -347,3 +347,4 @@ SYSCALL(sys_name_to_handle_at,sys_name_to_handle_at,sys_name_to_handle_at_wrappe SYSCALL(sys_open_by_handle_at,sys_open_by_handle_at,compat_sys_open_by_handle_at_wrapper) SYSCALL(sys_clock_adjtime,sys_clock_adjtime,compat_sys_clock_adjtime_wrapper) SYSCALL(sys_syncfs,sys_syncfs,sys_syncfs_wrapper) +SYSCALL(sys_setns,sys_setns,sys_setns_wrapper) diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h index bb7d2702c2c9..3432008d2888 100644 --- a/arch/sh/include/asm/unistd_32.h +++ b/arch/sh/include/asm/unistd_32.h @@ -374,8 +374,9 @@ #define __NR_clock_adjtime 361 #define __NR_syncfs 362 #define __NR_sendmmsg 363 +#define __NR_setns 364 -#define NR_syscalls 364 +#define NR_syscalls 365 #ifdef __KERNEL__ diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h index 46327cea1e5c..ec9898665f23 100644 --- a/arch/sh/include/asm/unistd_64.h +++ b/arch/sh/include/asm/unistd_64.h @@ -395,10 +395,11 @@ #define __NR_clock_adjtime 372 #define __NR_syncfs 373 #define __NR_sendmmsg 374 +#define __NR_setns 375 #ifdef __KERNEL__ -#define NR_syscalls 375 +#define NR_syscalls 376 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index 7c486f3e3a3c..39b051de4c7c 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -381,3 +381,4 @@ ENTRY(sys_call_table) .long sys_clock_adjtime .long sys_syncfs .long sys_sendmmsg + .long sys_setns diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index ba1a737afe80..089c4d825d08 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -401,3 +401,4 @@ sys_call_table: .long sys_clock_adjtime .long sys_syncfs .long sys_sendmmsg + .long sys_setns /* 375 */ diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index c5387ed0add8..6260d5deeabc 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -405,8 +405,9 @@ #define __NR_clock_adjtime 334 #define __NR_syncfs 335 #define __NR_sendmmsg 336 +#define __NR_setns 337 -#define NR_syscalls 337 +#define NR_syscalls 338 #ifdef __32bit_syscall_numbers__ /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index 332c83ff7701..6e492d59f6b1 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -84,4 +84,4 @@ sys_call_table: /*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv /*325*/ .long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime -/*335*/ .long sys_syncfs, sys_sendmmsg +/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index 43887ca0be0e..f566518483b5 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -85,7 +85,7 @@ sys_call_table32: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv .word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg, sys_fanotify_init /*330*/ .word sys32_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime - .word sys_syncfs, compat_sys_sendmmsg + .word sys_syncfs, compat_sys_sendmmsg, sys_setns #endif /* CONFIG_COMPAT */ @@ -162,4 +162,4 @@ sys_call_table: /*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv .word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg, sys_fanotify_init /*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime - .word sys_syncfs, sys_sendmmsg + .word sys_syncfs, sys_sendmmsg, sys_setns diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 95f5826be458..c1870dddd322 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -849,4 +849,5 @@ ia32_sys_call_table: .quad compat_sys_clock_adjtime .quad sys_syncfs .quad compat_sys_sendmmsg /* 345 */ + .quad sys_setns ia32_syscall_end: diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h index fb6a625c99bf..593485b38ab3 100644 --- a/arch/x86/include/asm/unistd_32.h +++ b/arch/x86/include/asm/unistd_32.h @@ -351,10 +351,11 @@ #define __NR_clock_adjtime 343 #define __NR_syncfs 344 #define __NR_sendmmsg 345 +#define __NR_setns 346 #ifdef __KERNEL__ -#define NR_syscalls 346 +#define NR_syscalls 347 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h index 79f90eb15aad..705bf139288c 100644 --- a/arch/x86/include/asm/unistd_64.h +++ b/arch/x86/include/asm/unistd_64.h @@ -679,6 +679,8 @@ __SYSCALL(__NR_clock_adjtime, sys_clock_adjtime) __SYSCALL(__NR_syncfs, sys_syncfs) #define __NR_sendmmsg 307 __SYSCALL(__NR_sendmmsg, sys_sendmmsg) +#define __NR_setns 308 +__SYSCALL(__NR_setns, sys_setns) #ifndef __NO_STUBS #define __ARCH_WANT_OLD_READDIR diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S index 32cbffb0c494..fbb0a045a1a2 100644 --- a/arch/x86/kernel/syscall_table_32.S +++ b/arch/x86/kernel/syscall_table_32.S @@ -345,3 +345,4 @@ ENTRY(sys_call_table) .long sys_clock_adjtime .long sys_syncfs .long sys_sendmmsg /* 345 */ + .long sys_setns diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h index 528042c2951e..a6f934f37f1a 100644 --- a/arch/xtensa/include/asm/unistd.h +++ b/arch/xtensa/include/asm/unistd.h @@ -683,8 +683,10 @@ __SYSCALL(305, sys_ni_syscall, 0) __SYSCALL(306, sys_eventfd, 1) #define __NR_recvmmsg 307 __SYSCALL(307, sys_recvmmsg, 5) +#define __NR_setns 308 +__SYSCALL(308, sys_setns, 2) -#define __NR_syscall_count 308 +#define __NR_syscall_count 309 /* * sysxtensa syscall handler diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h index 33d524704883..ae90e0f63995 100644 --- a/include/asm-generic/unistd.h +++ b/include/asm-generic/unistd.h @@ -681,9 +681,11 @@ __SC_COMP(__NR_open_by_handle_at, sys_open_by_handle_at, \ __SC_COMP(__NR_clock_adjtime, sys_clock_adjtime, compat_sys_clock_adjtime) #define __NR_syncfs 267 __SYSCALL(__NR_syncfs, sys_syncfs) +#define __NR_setns 268 +__SYSCALL(__NR_setns, sys_setns) #undef __NR_syscalls -#define __NR_syscalls 268 +#define __NR_syscalls 269 /* * All syscalls below here should go away really, -- cgit v1.2.3 From 091c75985e2f3d1b60eb25d577f04923c1b8e022 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 27 Oct 2010 03:41:03 -0400 Subject: Blackfin: bfin_serial.h: turn default port wrappers into stubs Any consumer that needs to access the MMRs has to provide these helpers, so make the default into useless stubs. Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/bfin_serial.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index 7dbc664eab1e..7fd0ec7b5b0f 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -184,7 +184,7 @@ struct bfin_uart_regs { #undef __BFP #ifndef port_membase -# define port_membase(p) (((struct bfin_serial_port *)(p))->port.membase) +# define port_membase(p) 0 #endif #define UART_GET_CHAR(p) bfin_read16(port_membase(p) + OFFSET_RBR) @@ -235,10 +235,10 @@ struct bfin_uart_regs { #define UART_SET_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) | DLAB); SSYNC(); } while (0) #ifndef put_lsr_cache -# define put_lsr_cache(p, v) (((struct bfin_serial_port *)(p))->lsr = (v)) +# define put_lsr_cache(p, v) #endif #ifndef get_lsr_cache -# define get_lsr_cache(p) (((struct bfin_serial_port *)(p))->lsr) +# define get_lsr_cache(p) 0 #endif /* The hardware clears the LSR bits upon read, so we need to cache -- cgit v1.2.3 From 63917efc4feb856e134eedc9ad7a9810fec12968 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 28 Sep 2009 03:16:01 +0000 Subject: Blackfin: mach/bfin_serial_5xx.h: punt now-unused header Now that the serial code has been unified in bfin_serial.h, and the Blackfin UART driver pushed its resources to the boards files, we don't need these headers anymore. Signed-off-by: Mike Frysinger --- .../mach-bf518/include/mach/bfin_serial_5xx.h | 79 ------------------ .../mach-bf527/include/mach/bfin_serial_5xx.h | 79 ------------------ .../mach-bf533/include/mach/bfin_serial_5xx.h | 52 ------------ .../mach-bf537/include/mach/bfin_serial_5xx.h | 79 ------------------ .../mach-bf538/include/mach/bfin_serial_5xx.h | 93 --------------------- .../mach-bf548/include/mach/bfin_serial_5xx.h | 94 ---------------------- .../mach-bf561/include/mach/bfin_serial_5xx.h | 52 ------------ 7 files changed, 528 deletions(-) delete mode 100644 arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h delete mode 100644 arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h delete mode 100644 arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h delete mode 100644 arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h delete mode 100644 arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h delete mode 100644 arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h delete mode 100644 arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h deleted file mode 100644 index f6d924ac0c44..000000000000 --- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2008-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#include -#include - -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) -# define CONFIG_SERIAL_BFIN_CTSRTS - -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { -#ifdef CONFIG_SERIAL_BFIN_UART0 - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - { - 0xFFC02000, - IRQ_UART1_RX, - IRQ_UART1_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART1_TX, - CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART1_CTS_PIN, - CONFIG_UART1_RTS_PIN, -#endif - }, -#endif -}; - -#define DRIVER_NAME "bfin-uart" - -#include diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h deleted file mode 100644 index 960e08919def..000000000000 --- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2007-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#include -#include - -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) -# define CONFIG_SERIAL_BFIN_CTSRTS - -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { -#ifdef CONFIG_SERIAL_BFIN_UART0 - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - { - 0xFFC02000, - IRQ_UART1_RX, - IRQ_UART1_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART1_TX, - CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART1_CTS_PIN, - CONFIG_UART1_RTS_PIN, -#endif - }, -#endif -}; - -#define DRIVER_NAME "bfin-uart" - -#include diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h deleted file mode 100644 index 45dcaa4f3e41..000000000000 --- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2006-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#include -#include - -#ifdef CONFIG_BFIN_UART0_CTSRTS -# define CONFIG_SERIAL_BFIN_CTSRTS -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - } -}; - -#define DRIVER_NAME "bfin-uart" - -#include diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h deleted file mode 100644 index 3e955dba8951..000000000000 --- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - * Copyright 2006-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later - */ - -#include -#include - -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) -# define CONFIG_SERIAL_BFIN_CTSRTS - -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { -#ifdef CONFIG_SERIAL_BFIN_UART0 - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - { - 0xFFC02000, - IRQ_UART1_RX, - IRQ_UART1_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART1_TX, - CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART1_CTS_PIN, - CONFIG_UART1_RTS_PIN, -#endif - }, -#endif -}; - -#define DRIVER_NAME "bfin-uart" - -#include diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h deleted file mode 100644 index beb502e9cb33..000000000000 --- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * Copyright 2008-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include - -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) -# define CONFIG_SERIAL_BFIN_CTSRTS - -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_CTS_PIN -# define CONFIG_UART1_CTS_PIN -1 -# endif - -# ifndef CONFIG_UART1_RTS_PIN -# define CONFIG_UART1_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { -#ifdef CONFIG_SERIAL_BFIN_UART0 - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - { - 0xFFC02000, - IRQ_UART1_RX, - IRQ_UART1_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART1_TX, - CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART1_CTS_PIN, - CONFIG_UART1_RTS_PIN, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART2 - { - 0xFFC02100, - IRQ_UART2_RX, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART2_TX, - CH_UART2_RX, -#endif -#ifdef CONFIG_BFIN_UART2_CTSRTS - CONFIG_UART2_CTS_PIN, - CONFIG_UART2_RTS_PIN, -#endif - }, -#endif -}; - -#define DRIVER_NAME "bfin-uart" - -#include diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h deleted file mode 100644 index 0d94edaaaa2e..000000000000 --- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Copyright 2007-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include - -#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) || \ - defined(CONFIG_BFIN_UART2_CTSRTS) || defined(CONFIG_BFIN_UART3_CTSRTS) -# define CONFIG_SERIAL_BFIN_HARD_CTSRTS -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { -#ifdef CONFIG_SERIAL_BFIN_UART0 - { - 0xFFC00400, - IRQ_UART0_RX, - IRQ_UART0_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART0_TX, - CH_UART0_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - 0, - 0, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART1 - { - 0xFFC02000, - IRQ_UART1_RX, - IRQ_UART1_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART1_TX, - CH_UART1_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - GPIO_PE10, - GPIO_PE9, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART2 - { - 0xFFC02100, - IRQ_UART2_RX, - IRQ_UART2_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART2_TX, - CH_UART2_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - 0, - 0, -#endif - }, -#endif -#ifdef CONFIG_SERIAL_BFIN_UART3 - { - 0xFFC03100, - IRQ_UART3_RX, - IRQ_UART3_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART3_TX, - CH_UART3_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - GPIO_PB3, - GPIO_PB2, -#endif - }, -#endif -}; - -#define DRIVER_NAME "bfin-uart" - -#include diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h deleted file mode 100644 index 3a6947456cf1..000000000000 --- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * Copyright 2006-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#include -#include - -#ifdef CONFIG_BFIN_UART0_CTSRTS -# define CONFIG_SERIAL_BFIN_CTSRTS -# ifndef CONFIG_UART0_CTS_PIN -# define CONFIG_UART0_CTS_PIN -1 -# endif -# ifndef CONFIG_UART0_RTS_PIN -# define CONFIG_UART0_RTS_PIN -1 -# endif -#endif - -struct bfin_serial_res { - unsigned long uart_base_addr; - int uart_irq; - int uart_status_irq; -#ifdef CONFIG_SERIAL_BFIN_DMA - unsigned int uart_tx_dma_channel; - unsigned int uart_rx_dma_channel; -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - int uart_cts_pin; - int uart_rts_pin; -#endif -}; - -struct bfin_serial_res bfin_serial_resource[] = { - { - 0xFFC00400, - IRQ_UART_RX, - IRQ_UART_ERROR, -#ifdef CONFIG_SERIAL_BFIN_DMA - CH_UART_TX, - CH_UART_RX, -#endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - CONFIG_UART0_CTS_PIN, - CONFIG_UART0_RTS_PIN, -#endif - } -}; - -#define DRIVER_NAME "bfin-uart" - -#include -- cgit v1.2.3 From 427472c967977256db42ffbf16f65f2770278b7f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Mon, 23 May 2011 21:45:42 -0400 Subject: Blackfin: wire up new sendmmsg syscall Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/unistd.h | 3 ++- arch/blackfin/mach-common/entry.S | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index 6ff9c411b145..0ccba60b9ccf 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -398,8 +398,9 @@ #define __NR_clock_adjtime 377 #define __NR_syncfs 378 #define __NR_setns 379 +#define __NR_sendmmsg 380 -#define __NR_syscall 380 +#define __NR_syscall 381 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index dda11ef06be5..225d311c9701 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -1754,6 +1754,7 @@ ENTRY(_sys_call_table) .long _sys_clock_adjtime .long _sys_syncfs .long _sys_setns + .long _sys_sendmmsg /* 380 */ .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall -- cgit v1.2.3 From a4ffd956924e265865a4425bd888927059fd46a9 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 26 May 2011 17:26:58 -0400 Subject: Blackfin: gptimers: add structure for hardware register layout Signed-off-by: Mike Frysinger --- arch/blackfin/include/asm/gptimers.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h index c722acdda0d3..38657dac1235 100644 --- a/arch/blackfin/include/asm/gptimers.h +++ b/arch/blackfin/include/asm/gptimers.h @@ -193,4 +193,22 @@ uint16_t get_enabled_gptimers(void); uint32_t get_gptimer_status(unsigned int group); void set_gptimer_status(unsigned int group, uint32_t value); +/* + * All Blackfin system MMRs are padded to 32bits even if the register + * itself is only 16bits. So use a helper macro to streamline this. + */ +#define __BFP(m) u16 m; u16 __pad_##m + +/* + * bfin timer registers layout + */ +struct bfin_gptimer_regs { + __BFP(config); + u32 counter; + u32 period; + u32 width; +}; + +#undef __BFP + #endif -- cgit v1.2.3 From d09fb602030e3247c21452ee2b3229baf115f71f Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 26 May 2011 17:27:36 -0400 Subject: Blackfin: debug-mmrs: fix typos with gptimers/mdma/ppi This code was mostly developed against a BF54x, so some BF537-specific issues were missed. The PPI block starts at PPI_CONTROL, not PPI_STATUS (which is the reverse of the EPPI block). The MDMA block starts at MDMA_NEXT_DESC_PTR, not MDMA_CONFIG. Seems the sim does not catch misreads here so that'll need to get fixed. The gptimer block is mostly 32bit regs, not 16bit. Use the gptimer struct to figure that out rather than hardcoding it locally. Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/debug-mmrs.c | 32 ++++++++++++++------------------ 1 file changed, 14 insertions(+), 18 deletions(-) diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c index 94b1d8a0256a..aa201be49a1e 100644 --- a/arch/blackfin/kernel/debug-mmrs.c +++ b/arch/blackfin/kernel/debug-mmrs.c @@ -13,6 +13,7 @@ #include #include +#include #include #include #include @@ -230,8 +231,8 @@ bfin_debug_mmrs_dma(struct dentry *parent, unsigned long base, int num, char mdm #define DMA(num) _DMA(num, DMA##num##_NEXT_DESC_PTR, 0, "") #define _MDMA(num, x) \ do { \ - _DMA(num, x##DMA_D##num##_CONFIG, 'D', #x); \ - _DMA(num, x##DMA_S##num##_CONFIG, 'S', #x); \ + _DMA(num, x##DMA_D##num##_NEXT_DESC_PTR, 'D', #x); \ + _DMA(num, x##DMA_S##num##_NEXT_DESC_PTR, 'S', #x); \ } while (0) #define MDMA(num) _MDMA(num, M) #define IMDMA(num) _MDMA(num, IM) @@ -264,20 +265,15 @@ bfin_debug_mmrs_eppi(struct dentry *parent, unsigned long base, int num) /* * General Purpose Timers */ -#define GPTIMER_OFF(mmr) (TIMER0_##mmr - TIMER0_CONFIG) -#define __GPTIMER(name) \ - do { \ - strcpy(_buf, #name); \ - debugfs_create_x16(buf, S_IRUSR|S_IWUSR, parent, (u16 *)(base + GPTIMER_OFF(name))); \ - } while (0) +#define __GPTIMER(uname, lname) __REGS(gptimer, #uname, lname) static void __init __maybe_unused bfin_debug_mmrs_gptimer(struct dentry *parent, unsigned long base, int num) { char buf[32], *_buf = REGS_STR_PFX(buf, TIMER, num); - __GPTIMER(CONFIG); - __GPTIMER(COUNTER); - __GPTIMER(PERIOD); - __GPTIMER(WIDTH); + __GPTIMER(CONFIG, config); + __GPTIMER(COUNTER, counter); + __GPTIMER(PERIOD, period); + __GPTIMER(WIDTH, width); } #define GPTIMER(num) bfin_debug_mmrs_gptimer(parent, TIMER##num##_CONFIG, num) @@ -355,7 +351,7 @@ bfin_debug_mmrs_ppi(struct dentry *parent, unsigned long base, int num) __PPI(DELAY, delay); __PPI(FRAME, frame); } -#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_STATUS, num) +#define PPI(num) bfin_debug_mmrs_ppi(parent, PPI##num##_CONTROL, num) /* * SPI @@ -1288,15 +1284,15 @@ static int __init bfin_debug_mmrs_init(void) D16(VR_CTL); D32(CHIPID); /* it's part of this hardware block */ -#if defined(PPI_STATUS) || defined(PPI0_STATUS) || defined(PPI1_STATUS) +#if defined(PPI_CONTROL) || defined(PPI0_CONTROL) || defined(PPI1_CONTROL) parent = debugfs_create_dir("ppi", top); -# ifdef PPI_STATUS - bfin_debug_mmrs_ppi(parent, PPI_STATUS, -1); +# ifdef PPI_CONTROL + bfin_debug_mmrs_ppi(parent, PPI_CONTROL, -1); # endif -# ifdef PPI0_STATUS +# ifdef PPI0_CONTROL PPI(0); # endif -# ifdef PPI1_STATUS +# ifdef PPI1_CONTROL PPI(1); # endif #endif -- cgit v1.2.3 From 61aa818f7bfdb5dd0aef4687513566c75c0e4c21 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 26 May 2011 17:39:17 -0400 Subject: Blackfin: bf52x/bf54x: fix up usb MMR defines The bf52x/bf54x have the incorrect addresses for USB_EP_NI7_RXINTERVAL and USB_EP_NI7_TXCOUNT, so adjust those. Further, the bf54x header puts the USB defines in the wrong place, so shuffle them back to the right grouping. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf527/include/mach/defBF525.h | 4 ++-- arch/blackfin/mach-bf548/include/mach/defBF547.h | 19 ++++++++++--------- 2 files changed, 12 insertions(+), 11 deletions(-) diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h index cc383adfdffa..aab80bb1a683 100644 --- a/arch/blackfin/mach-bf527/include/mach/defBF525.h +++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h @@ -185,8 +185,8 @@ #define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ #define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */ #define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_EP_NI7_RXINTERVAL 0xffc03be0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03be8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ #define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */ diff --git a/arch/blackfin/mach-bf548/include/mach/defBF547.h b/arch/blackfin/mach-bf548/include/mach/defBF547.h index 1cbba115f96f..1fa41ec03f31 100644 --- a/arch/blackfin/mach-bf548/include/mach/defBF547.h +++ b/arch/blackfin/mach-bf548/include/mach/defBF547.h @@ -271,10 +271,10 @@ #define USB_EP_NI0_TXINTERVAL 0xffc03e18 /* Sets the NAK response timeout on Endpoint 0 */ #define USB_EP_NI0_RXTYPE 0xffc03e1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */ #define USB_EP_NI0_RXINTERVAL 0xffc03e20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */ +#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ /* USB Endpoint 1 Control Registers */ -#define USB_EP_NI0_TXCOUNT 0xffc03e28 /* Number of bytes to be written to the endpoint0 Tx FIFO */ #define USB_EP_NI1_TXMAXP 0xffc03e40 /* Maximum packet size for Host Tx endpoint1 */ #define USB_EP_NI1_TXCSR 0xffc03e44 /* Control Status register for endpoint1 */ #define USB_EP_NI1_RXMAXP 0xffc03e48 /* Maximum packet size for Host Rx endpoint1 */ @@ -284,10 +284,10 @@ #define USB_EP_NI1_TXINTERVAL 0xffc03e58 /* Sets the NAK response timeout on Endpoint1 */ #define USB_EP_NI1_RXTYPE 0xffc03e5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */ #define USB_EP_NI1_RXINTERVAL 0xffc03e60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */ +#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ /* USB Endpoint 2 Control Registers */ -#define USB_EP_NI1_TXCOUNT 0xffc03e68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */ #define USB_EP_NI2_TXMAXP 0xffc03e80 /* Maximum packet size for Host Tx endpoint2 */ #define USB_EP_NI2_TXCSR 0xffc03e84 /* Control Status register for endpoint2 */ #define USB_EP_NI2_RXMAXP 0xffc03e88 /* Maximum packet size for Host Rx endpoint2 */ @@ -297,10 +297,10 @@ #define USB_EP_NI2_TXINTERVAL 0xffc03e98 /* Sets the NAK response timeout on Endpoint2 */ #define USB_EP_NI2_RXTYPE 0xffc03e9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */ #define USB_EP_NI2_RXINTERVAL 0xffc03ea0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */ +#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ /* USB Endpoint 3 Control Registers */ -#define USB_EP_NI2_TXCOUNT 0xffc03ea8 /* Number of bytes to be written to the endpoint2 Tx FIFO */ #define USB_EP_NI3_TXMAXP 0xffc03ec0 /* Maximum packet size for Host Tx endpoint3 */ #define USB_EP_NI3_TXCSR 0xffc03ec4 /* Control Status register for endpoint3 */ #define USB_EP_NI3_RXMAXP 0xffc03ec8 /* Maximum packet size for Host Rx endpoint3 */ @@ -310,10 +310,10 @@ #define USB_EP_NI3_TXINTERVAL 0xffc03ed8 /* Sets the NAK response timeout on Endpoint3 */ #define USB_EP_NI3_RXTYPE 0xffc03edc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */ #define USB_EP_NI3_RXINTERVAL 0xffc03ee0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */ +#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ /* USB Endpoint 4 Control Registers */ -#define USB_EP_NI3_TXCOUNT 0xffc03ee8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */ #define USB_EP_NI4_TXMAXP 0xffc03f00 /* Maximum packet size for Host Tx endpoint4 */ #define USB_EP_NI4_TXCSR 0xffc03f04 /* Control Status register for endpoint4 */ #define USB_EP_NI4_RXMAXP 0xffc03f08 /* Maximum packet size for Host Rx endpoint4 */ @@ -323,10 +323,10 @@ #define USB_EP_NI4_TXINTERVAL 0xffc03f18 /* Sets the NAK response timeout on Endpoint4 */ #define USB_EP_NI4_RXTYPE 0xffc03f1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */ #define USB_EP_NI4_RXINTERVAL 0xffc03f20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */ +#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ /* USB Endpoint 5 Control Registers */ -#define USB_EP_NI4_TXCOUNT 0xffc03f28 /* Number of bytes to be written to the endpoint4 Tx FIFO */ #define USB_EP_NI5_TXMAXP 0xffc03f40 /* Maximum packet size for Host Tx endpoint5 */ #define USB_EP_NI5_TXCSR 0xffc03f44 /* Control Status register for endpoint5 */ #define USB_EP_NI5_RXMAXP 0xffc03f48 /* Maximum packet size for Host Rx endpoint5 */ @@ -336,10 +336,10 @@ #define USB_EP_NI5_TXINTERVAL 0xffc03f58 /* Sets the NAK response timeout on Endpoint5 */ #define USB_EP_NI5_RXTYPE 0xffc03f5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */ #define USB_EP_NI5_RXINTERVAL 0xffc03f60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */ +#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ /* USB Endpoint 6 Control Registers */ -#define USB_EP_NI5_TXCOUNT 0xffc03f68 /* Number of bytes to be written to the H145endpoint5 Tx FIFO */ #define USB_EP_NI6_TXMAXP 0xffc03f80 /* Maximum packet size for Host Tx endpoint6 */ #define USB_EP_NI6_TXCSR 0xffc03f84 /* Control Status register for endpoint6 */ #define USB_EP_NI6_RXMAXP 0xffc03f88 /* Maximum packet size for Host Rx endpoint6 */ @@ -349,10 +349,10 @@ #define USB_EP_NI6_TXINTERVAL 0xffc03f98 /* Sets the NAK response timeout on Endpoint6 */ #define USB_EP_NI6_RXTYPE 0xffc03f9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */ #define USB_EP_NI6_RXINTERVAL 0xffc03fa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */ +#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ /* USB Endpoint 7 Control Registers */ -#define USB_EP_NI6_TXCOUNT 0xffc03fa8 /* Number of bytes to be written to the endpoint6 Tx FIFO */ #define USB_EP_NI7_TXMAXP 0xffc03fc0 /* Maximum packet size for Host Tx endpoint7 */ #define USB_EP_NI7_TXCSR 0xffc03fc4 /* Control Status register for endpoint7 */ #define USB_EP_NI7_RXMAXP 0xffc03fc8 /* Maximum packet size for Host Rx endpoint7 */ @@ -361,8 +361,9 @@ #define USB_EP_NI7_TXTYPE 0xffc03fd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */ #define USB_EP_NI7_TXINTERVAL 0xffc03fd8 /* Sets the NAK response timeout on Endpoint7 */ #define USB_EP_NI7_RXTYPE 0xffc03fdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */ -#define USB_EP_NI7_RXINTERVAL 0xffc03ff0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ -#define USB_EP_NI7_TXCOUNT 0xffc03ff8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ +#define USB_EP_NI7_RXINTERVAL 0xffc03fe0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */ +#define USB_EP_NI7_TXCOUNT 0xffc03fe8 /* Number of bytes to be written to the endpoint7 Tx FIFO */ + #define USB_DMA_INTERRUPT 0xffc04000 /* Indicates pending interrupts for the DMA channels */ /* USB Channel 0 Config Registers */ -- cgit v1.2.3 From fcb243918f9e8414bf5ad6fb0361447ac3d3fddb Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 26 May 2011 18:05:15 -0400 Subject: Blackfin: bf51x: fix up RSI_PID# MMR defines Looks like the copying of MMR defines from the SDH block missed updating the addresses of the RSI_PID# registers. So tweak them to reflect the actual hardware. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf518/include/mach/defBF514.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/blackfin/mach-bf518/include/mach/defBF514.h b/arch/blackfin/mach-bf518/include/mach/defBF514.h index 98a51c479290..cfab428e577c 100644 --- a/arch/blackfin/mach-bf518/include/mach/defBF514.h +++ b/arch/blackfin/mach-bf518/include/mach/defBF514.h @@ -36,13 +36,13 @@ #define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */ #define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */ #define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */ -#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */ -#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */ -#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */ -#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */ -#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */ -#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */ -#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */ -#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */ +#define RSI_PID0 0xFFC038D0 /* RSI Peripheral ID Register 0 */ +#define RSI_PID1 0xFFC038D4 /* RSI Peripheral ID Register 1 */ +#define RSI_PID2 0xFFC038D8 /* RSI Peripheral ID Register 2 */ +#define RSI_PID3 0xFFC038DC /* RSI Peripheral ID Register 3 */ +#define RSI_PID4 0xFFC038E0 /* RSI Peripheral ID Register 0 */ +#define RSI_PID5 0xFFC038E4 /* RSI Peripheral ID Register 1 */ +#define RSI_PID6 0xFFC038E8 /* RSI Peripheral ID Register 2 */ +#define RSI_PID7 0xFFC038EC /* RSI Peripheral ID Register 3 */ #endif /* _DEF_BF514_H */ -- cgit v1.2.3 From c320afe965bf3f857249d223801d8f2fc95615c2 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 26 May 2011 18:07:11 -0400 Subject: Blackfin: debug-mmrs: include RSI_PID[4567] MMRs The documentation is a little iffy as to whether these are actual MMRs, but reading them on the hardware works, and the previous version of this logic (the SDH) had PID[4567]. So add it for RSI too. Signed-off-by: Mike Frysinger --- arch/blackfin/kernel/debug-mmrs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/blackfin/kernel/debug-mmrs.c b/arch/blackfin/kernel/debug-mmrs.c index aa201be49a1e..fce4807ceef9 100644 --- a/arch/blackfin/kernel/debug-mmrs.c +++ b/arch/blackfin/kernel/debug-mmrs.c @@ -1337,6 +1337,10 @@ static int __init bfin_debug_mmrs_init(void) D16(RSI_PID1); D16(RSI_PID2); D16(RSI_PID3); + D16(RSI_PID4); + D16(RSI_PID5); + D16(RSI_PID6); + D16(RSI_PID7); D16(RSI_PWR_CONTROL); D16(RSI_RD_WAIT_EN); D32(RSI_RESPONSE0); -- cgit v1.2.3 From 826267cf1e6c6899eda1325a19f1b1d15c558b20 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sat, 28 May 2011 13:14:09 -0700 Subject: tmpfs: fix race between truncate and writepage While running fsx on tmpfs with a memhog then swapoff, swapoff was hanging (interruptibly), repeatedly failing to locate the owner of a 0xff entry in the swap_map. Although shmem_writepage() does abandon when it sees incoming page index is beyond eof, there was still a window in which shmem_truncate_range() could come in between writepage's dropping lock and updating swap_map, find the half-completed swap_map entry, and in trying to free it, leave it in a state that swap_shmem_alloc() could not correct. Arguably a bug in __swap_duplicate()'s and swap_entry_free()'s handling of the different cases, but easiest to fix by moving swap_shmem_alloc() under cover of the lock. More interesting than the bug: it's been there since 2.6.33, why could I not see it with earlier kernels? The mmotm of two weeks ago seems to have some magic for generating races, this is just one of three I found. With yesterday's git I first saw this in mainline, bisected in search of that magic, but the easy reproducibility evaporated. Oh well, fix the bug. Signed-off-by: Hugh Dickins Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- mm/shmem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/shmem.c b/mm/shmem.c index 1acfb2687bfa..d221a1cfd7b1 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1114,8 +1114,8 @@ static int shmem_writepage(struct page *page, struct writeback_control *wbc) delete_from_page_cache(page); shmem_swp_set(info, entry, swap.val); shmem_swp_unmap(entry); - spin_unlock(&info->lock); swap_shmem_alloc(swap); + spin_unlock(&info->lock); BUG_ON(page_mapped(page)); swap_writepage(page, wbc); return 0; -- cgit v1.2.3 From 5dbe0af47f8a8f968bac2991c3ec974c6e3eaabc Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sat, 28 May 2011 13:17:04 -0700 Subject: mm: fix kernel BUG at mm/rmap.c:1017! I've hit the "address >= vma->vm_end" check in do_page_add_anon_rmap() just once. The stack showed khugepaged allocation trying to compact pages: the call to page_add_anon_rmap() coming from remove_migration_pte(). That path holds anon_vma lock, but does not hold mmap_sem: it can therefore race with a split_vma(), and in commit 5f70b962ccc2 "mmap: avoid unnecessary anon_vma lock" we just took away the anon_vma lock protection when adjusting vma->vm_end. I don't think that particular BUG_ON ever caught anything interesting, so better replace it by a comment, than reinstate the anon_vma locking. Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds --- mm/rmap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/rmap.c b/mm/rmap.c index 3a39b518a653..ba58ca36fc90 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -1014,7 +1014,7 @@ void do_page_add_anon_rmap(struct page *page, return; VM_BUG_ON(!PageLocked(page)); - VM_BUG_ON(address < vma->vm_start || address >= vma->vm_end); + /* address might be in next vma when migration races vma_adjust */ if (first) __page_set_anon_rmap(page, vma, address, exclusive); else @@ -1709,7 +1709,7 @@ void hugepage_add_anon_rmap(struct page *page, BUG_ON(!PageLocked(page)); BUG_ON(!anon_vma); - BUG_ON(address < vma->vm_start || address >= vma->vm_end); + /* address might be in next vma when migration races vma_adjust */ first = atomic_inc_and_test(&page->_mapcount); if (first) __hugepage_set_anon_rmap(page, vma, address, 0); -- cgit v1.2.3 From eee0f252c6537da2e883f75d22cff1427515eaf3 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Sat, 28 May 2011 13:20:21 -0700 Subject: mm: fix page_lock_anon_vma leaving mutex locked On one machine I've been getting hangs, a page fault's anon_vma_prepare() waiting in anon_vma_lock(), other processes waiting for that page's lock. This is a replay of last year's f18194275c39 "mm: fix hang on anon_vma->root->lock". The new page_lock_anon_vma() places too much faith in its refcount: when it has acquired the mutex_trylock(), it's possible that a racing task in anon_vma_alloc() has just reallocated the struct anon_vma, set refcount to 1, and is about to reset its anon_vma->root. Fix this by saving anon_vma->root, and relying on the usual page_mapped() check instead of a refcount check: if page is still mapped, the anon_vma is still ours; if page is not still mapped, we're no longer interested. Signed-off-by: Hugh Dickins Signed-off-by: Linus Torvalds --- mm/rmap.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/mm/rmap.c b/mm/rmap.c index ba58ca36fc90..6bada99cd61c 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -405,6 +405,7 @@ out: struct anon_vma *page_lock_anon_vma(struct page *page) { struct anon_vma *anon_vma = NULL; + struct anon_vma *root_anon_vma; unsigned long anon_mapping; rcu_read_lock(); @@ -415,13 +416,15 @@ struct anon_vma *page_lock_anon_vma(struct page *page) goto out; anon_vma = (struct anon_vma *) (anon_mapping - PAGE_MAPPING_ANON); - if (mutex_trylock(&anon_vma->root->mutex)) { + root_anon_vma = ACCESS_ONCE(anon_vma->root); + if (mutex_trylock(&root_anon_vma->mutex)) { /* - * If we observe a !0 refcount, then holding the lock ensures - * the anon_vma will not go away, see __put_anon_vma(). + * If the page is still mapped, then this anon_vma is still + * its anon_vma, and holding the mutex ensures that it will + * not go away, see __put_anon_vma(). */ - if (!atomic_read(&anon_vma->refcount)) { - anon_vma_unlock(anon_vma); + if (!page_mapped(page)) { + mutex_unlock(&root_anon_vma->mutex); anon_vma = NULL; } goto out; -- cgit v1.2.3 From 7467571f4480b273007517b26297c07154c73924 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 24 Feb 2011 17:19:23 +0200 Subject: cpuidle: menu: fixed wrapping timers at 4.294 seconds Cpuidle menu governor is using u32 as a temporary datatype for storing nanosecond values which wrap around at 4.294 seconds. This causes errors in predicted sleep times resulting in higher than should be C state selection and increased power consumption. This also breaks cpuidle state residency statistics. cc: stable@kernel.org # .32.x through .39.x Signed-off-by: Tero Kristo Signed-off-by: Len Brown --- drivers/cpuidle/governors/menu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index f508690eb958..c47f3d09c1ee 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -237,6 +237,7 @@ static int menu_select(struct cpuidle_device *dev) unsigned int power_usage = -1; int i; int multiplier; + struct timespec t; if (data->needs_update) { menu_update(dev); @@ -251,8 +252,9 @@ static int menu_select(struct cpuidle_device *dev) return 0; /* determine the expected residency time, round up */ + t = ktime_to_timespec(tick_nohz_get_sleep_length()); data->expected_us = - DIV_ROUND_UP((u32)ktime_to_ns(tick_nohz_get_sleep_length()), 1000); + t.tv_sec * USEC_PER_SEC + t.tv_nsec / NSEC_PER_USEC; data->bucket = which_bucket(data->expected_us); -- cgit v1.2.3 From 333c5ae9948194428fe6c5ef5c088304fc98263b Mon Sep 17 00:00:00 2001 From: Tim Chen Date: Fri, 11 Feb 2011 12:49:04 -0800 Subject: idle governor: Avoid lock acquisition to read pm_qos before entering idle Thanks to the reviews and comments by Rafael, James, Mark and Andi. Here's version 2 of the patch incorporating your comments and also some update to my previous patch comments. I noticed that before entering idle state, the menu idle governor will look up the current pm_qos target value according to the list of qos requests received. This look up currently needs the acquisition of a lock to access the list of qos requests to find the qos target value, slowing down the entrance into idle state due to contention by multiple cpus to access this list. The contention is severe when there are a lot of cpus waking and going into idle. For example, for a simple workload that has 32 pair of processes ping ponging messages to each other, where 64 cpu cores are active in test system, I see the following profile with 37.82% of cpu cycles spent in contention of pm_qos_lock: - 37.82% swapper [kernel.kallsyms] [k] _raw_spin_lock_irqsave - _raw_spin_lock_irqsave - 95.65% pm_qos_request menu_select cpuidle_idle_call - cpu_idle 99.98% start_secondary A better approach will be to cache the updated pm_qos target value so reading it does not require lock acquisition as in the patch below. With this patch the contention for pm_qos_lock is removed and I saw a 2.2X increase in throughput for my message passing workload. cc: stable@kernel.org Signed-off-by: Tim Chen Acked-by: Andi Kleen Acked-by: James Bottomley Acked-by: mark gross Signed-off-by: Len Brown --- include/linux/pm_qos_params.h | 4 ++++ kernel/pm_qos_params.c | 37 +++++++++++++++++++++++++------------ 2 files changed, 29 insertions(+), 12 deletions(-) diff --git a/include/linux/pm_qos_params.h b/include/linux/pm_qos_params.h index 77cbddb3784c..a7d87f911cab 100644 --- a/include/linux/pm_qos_params.h +++ b/include/linux/pm_qos_params.h @@ -16,6 +16,10 @@ #define PM_QOS_NUM_CLASSES 4 #define PM_QOS_DEFAULT_VALUE -1 +#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC) +#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC) +#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0 + struct pm_qos_request_list { struct plist_node list; int pm_qos_class; diff --git a/kernel/pm_qos_params.c b/kernel/pm_qos_params.c index aeaa7f846821..6a8fad82a3ad 100644 --- a/kernel/pm_qos_params.c +++ b/kernel/pm_qos_params.c @@ -53,11 +53,17 @@ enum pm_qos_type { PM_QOS_MIN /* return the smallest value */ }; +/* + * Note: The lockless read path depends on the CPU accessing + * target_value atomically. Atomic access is only guaranteed on all CPU + * types linux supports for 32 bit quantites + */ struct pm_qos_object { struct plist_head requests; struct blocking_notifier_head *notifiers; struct miscdevice pm_qos_power_miscdev; char *name; + s32 target_value; /* Do not change to 64 bit */ s32 default_value; enum pm_qos_type type; }; @@ -70,7 +76,8 @@ static struct pm_qos_object cpu_dma_pm_qos = { .requests = PLIST_HEAD_INIT(cpu_dma_pm_qos.requests, pm_qos_lock), .notifiers = &cpu_dma_lat_notifier, .name = "cpu_dma_latency", - .default_value = 2000 * USEC_PER_SEC, + .target_value = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE, + .default_value = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE, .type = PM_QOS_MIN, }; @@ -79,7 +86,8 @@ static struct pm_qos_object network_lat_pm_qos = { .requests = PLIST_HEAD_INIT(network_lat_pm_qos.requests, pm_qos_lock), .notifiers = &network_lat_notifier, .name = "network_latency", - .default_value = 2000 * USEC_PER_SEC, + .target_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE, + .default_value = PM_QOS_NETWORK_LAT_DEFAULT_VALUE, .type = PM_QOS_MIN }; @@ -89,7 +97,8 @@ static struct pm_qos_object network_throughput_pm_qos = { .requests = PLIST_HEAD_INIT(network_throughput_pm_qos.requests, pm_qos_lock), .notifiers = &network_throughput_notifier, .name = "network_throughput", - .default_value = 0, + .target_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE, + .default_value = PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE, .type = PM_QOS_MAX, }; @@ -132,6 +141,16 @@ static inline int pm_qos_get_value(struct pm_qos_object *o) } } +static inline s32 pm_qos_read_value(struct pm_qos_object *o) +{ + return o->target_value; +} + +static inline void pm_qos_set_value(struct pm_qos_object *o, s32 value) +{ + o->target_value = value; +} + static void update_target(struct pm_qos_object *o, struct plist_node *node, int del, int value) { @@ -156,6 +175,7 @@ static void update_target(struct pm_qos_object *o, struct plist_node *node, plist_add(node, &o->requests); } curr_value = pm_qos_get_value(o); + pm_qos_set_value(o, curr_value); spin_unlock_irqrestore(&pm_qos_lock, flags); if (prev_value != curr_value) @@ -190,18 +210,11 @@ static int find_pm_qos_object_by_minor(int minor) * pm_qos_request - returns current system wide qos expectation * @pm_qos_class: identification of which qos value is requested * - * This function returns the current target value in an atomic manner. + * This function returns the current target value. */ int pm_qos_request(int pm_qos_class) { - unsigned long flags; - int value; - - spin_lock_irqsave(&pm_qos_lock, flags); - value = pm_qos_get_value(pm_qos_array[pm_qos_class]); - spin_unlock_irqrestore(&pm_qos_lock, flags); - - return value; + return pm_qos_read_value(pm_qos_array[pm_qos_class]); } EXPORT_SYMBOL_GPL(pm_qos_request); -- cgit v1.2.3 From 534bc4e3d27096e2f3fc00c14a20efd597837a4f Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 26 Apr 2011 16:30:02 +0800 Subject: ACPI EC: enable MSI workaround for Quanta laptops Enable MSI workaround for Quanta laptops. https://bugzilla.kernel.org/show_bug.cgi?id=20242 Tested-by: Jan-Matthias Braun Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/ec.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index fa848c4116a8..62628e5eba39 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -938,6 +938,14 @@ static struct dmi_system_id __initdata ec_dmi_table[] = { ec_flag_msi, "MSI hardware", { DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR")}, NULL}, { + ec_flag_msi, "Quanta hardware", { + DMI_MATCH(DMI_SYS_VENDOR, "Quanta"), + DMI_MATCH(DMI_PRODUCT_NAME, "TW8/SW8/DW8"),}, NULL}, + { + ec_flag_msi, "Quanta hardware", { + DMI_MATCH(DMI_SYS_VENDOR, "Quanta"), + DMI_MATCH(DMI_PRODUCT_NAME, "TW9/SW9"),}, NULL}, + { ec_validate_ecdt, "ASUS hardware", { DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL}, {}, -- cgit v1.2.3 From aecad432fd68dafa5b3b497c4816fbfce6fd4066 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Thu, 26 May 2011 12:26:23 +0200 Subject: ACPI: Cleanup custom_method debug stuff - Move param aml_debug_output to other params into sysfs.c - Split acpi_debugfs_init to prepare custom_method to be an own .config option and driver. Signed-off-by: Thomas Renninger Acked-by: Rafael J. Wysocki Acked-by: rui.zhang@intel.com Signed-off-by: Len Brown --- drivers/acpi/debugfs.c | 32 +++++++++++++------------------- drivers/acpi/internal.h | 3 ++- drivers/acpi/sysfs.c | 8 ++++++++ 3 files changed, 23 insertions(+), 20 deletions(-) diff --git a/drivers/acpi/debugfs.c b/drivers/acpi/debugfs.c index 384f7abcff77..e7abc6e3bba0 100644 --- a/drivers/acpi/debugfs.c +++ b/drivers/acpi/debugfs.c @@ -12,13 +12,8 @@ #define _COMPONENT ACPI_SYSTEM_COMPONENT ACPI_MODULE_NAME("debugfs"); - -/* /sys/modules/acpi/parameters/aml_debug_output */ - -module_param_named(aml_debug_output, acpi_gbl_enable_aml_debug_object, - bool, 0644); -MODULE_PARM_DESC(aml_debug_output, - "To enable/disable the ACPI Debug Object output."); +struct dentry *acpi_debugfs_dir; +static struct dentry *cm_dentry; /* /sys/kernel/debug/acpi/custom_method */ @@ -80,23 +75,22 @@ static const struct file_operations cm_fops = { .llseek = default_llseek, }; -int __init acpi_debugfs_init(void) +static int __init acpi_custom_method_init(void) { - struct dentry *acpi_dir, *cm_dentry; - - acpi_dir = debugfs_create_dir("acpi", NULL); - if (!acpi_dir) - goto err; + if (!acpi_debugfs_dir) + return -ENOENT; cm_dentry = debugfs_create_file("custom_method", S_IWUSR, - acpi_dir, NULL, &cm_fops); + acpi_debugfs_dir, NULL, &cm_fops); if (!cm_dentry) - goto err; + return -ENODEV; return 0; +} + +void __init acpi_debugfs_init(void) +{ + acpi_debugfs_dir = debugfs_create_dir("acpi", NULL); -err: - if (acpi_dir) - debugfs_remove(acpi_dir); - return -EINVAL; + acpi_custom_method_init(); } diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index 4bfb759deb10..ca75b9ce0489 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -28,9 +28,10 @@ int acpi_scan_init(void); int acpi_sysfs_init(void); #ifdef CONFIG_DEBUG_FS +extern struct dentry *acpi_debugfs_dir; int acpi_debugfs_init(void); #else -static inline int acpi_debugfs_init(void) { return 0; } +static inline void acpi_debugfs_init(void) { return; } #endif /* -------------------------------------------------------------------------- diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index 61891e75583d..77255f250dbb 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -220,6 +220,14 @@ module_param_call(trace_state, param_set_trace_state, param_get_trace_state, NULL, 0644); #endif /* CONFIG_ACPI_DEBUG */ + +/* /sys/modules/acpi/parameters/aml_debug_output */ + +module_param_named(aml_debug_output, acpi_gbl_enable_aml_debug_object, + bool, 0644); +MODULE_PARM_DESC(aml_debug_output, + "To enable/disable the ACPI Debug Object output."); + /* /sys/module/acpi/parameters/acpica_version */ static int param_get_acpica_version(char *buffer, struct kernel_param *kp) { -- cgit v1.2.3 From 526b4af47f44148c9d665e57723ed9f86634c6e3 Mon Sep 17 00:00:00 2001 From: Thomas Renninger Date: Thu, 26 May 2011 12:26:24 +0200 Subject: ACPI: Split out custom_method functionality into an own driver With /sys/kernel/debug/acpi/custom_method root can write to arbitrary memory and increase his priveleges, even if these are restricted. -> Make this an own debug .config option and warn about the security issue in the config description. -> Still keep acpi/debugfs.c which now only creates an empty /sys/kernel/debug/acpi directory. There might be other users of it later. Signed-off-by: Thomas Renninger Acked-by: Rafael J. Wysocki Acked-by: rui.zhang@intel.com Signed-off-by: Len Brown --- Documentation/acpi/method-customizing.txt | 5 ++ drivers/acpi/Kconfig | 15 +++++ drivers/acpi/Makefile | 1 + drivers/acpi/custom_method.c | 100 ++++++++++++++++++++++++++++++ drivers/acpi/debugfs.c | 80 +----------------------- 5 files changed, 122 insertions(+), 79 deletions(-) create mode 100644 drivers/acpi/custom_method.c diff --git a/Documentation/acpi/method-customizing.txt b/Documentation/acpi/method-customizing.txt index 3e1d25aee3fb..5f55373dd53b 100644 --- a/Documentation/acpi/method-customizing.txt +++ b/Documentation/acpi/method-customizing.txt @@ -66,3 +66,8 @@ Note: We can use a kernel with multiple custom ACPI method running, But each individual write to debugfs can implement a SINGLE method override. i.e. if we want to insert/override multiple ACPI methods, we need to redo step c) ~ g) for multiple times. + +Note: Be aware that root can mis-use this driver to modify arbitrary + memory and gain additional rights, if root's privileges got + restricted (for example if root is not allowed to load additional + modules after boot). diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 3a17ca5fff6f..d918e130bef3 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -380,6 +380,21 @@ config ACPI_HED which is used to report some hardware errors notified via SCI, mainly the corrected errors. +config ACPI_CUSTOM_METHOD + tristate "Allow ACPI methods to be inserted/replaced at run time" + depends on DEBUG_FS + default n + help + This debug facility allows ACPI AML methods to me inserted and/or + replaced without rebooting the system. For details refer to: + Documentation/acpi/method-customizing.txt. + + NOTE: This option is security sensitive, because it allows arbitrary + kernel memory to be written to by root (uid=0) users, allowing them + to bypass certain security measures (e.g. if root is not allowed to + load additional kernel modules after boot, this feature may be used + to override that restriction). + source "drivers/acpi/apei/Kconfig" endif # ACPI diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index d113fa5100b2..cba0b2334b9b 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -62,6 +62,7 @@ obj-$(CONFIG_ACPI_SBS) += sbs.o obj-$(CONFIG_ACPI_POWER_METER) += power_meter.o obj-$(CONFIG_ACPI_HED) += hed.o obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o +obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o # processor has its own "processor." module_param namespace processor-y := processor_driver.o processor_throttling.o diff --git a/drivers/acpi/custom_method.c b/drivers/acpi/custom_method.c new file mode 100644 index 000000000000..5d42c2414ae5 --- /dev/null +++ b/drivers/acpi/custom_method.c @@ -0,0 +1,100 @@ +/* + * debugfs.c - ACPI debugfs interface to userspace. + */ + +#include +#include +#include +#include +#include +#include + +#include "internal.h" + +#define _COMPONENT ACPI_SYSTEM_COMPONENT +ACPI_MODULE_NAME("custom_method"); +MODULE_LICENSE("GPL"); + +static struct dentry *cm_dentry; + +/* /sys/kernel/debug/acpi/custom_method */ + +static ssize_t cm_write(struct file *file, const char __user * user_buf, + size_t count, loff_t *ppos) +{ + static char *buf; + static u32 max_size; + static u32 uncopied_bytes; + + struct acpi_table_header table; + acpi_status status; + + if (!(*ppos)) { + /* parse the table header to get the table length */ + if (count <= sizeof(struct acpi_table_header)) + return -EINVAL; + if (copy_from_user(&table, user_buf, + sizeof(struct acpi_table_header))) + return -EFAULT; + uncopied_bytes = max_size = table.length; + buf = kzalloc(max_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + } + + if (buf == NULL) + return -EINVAL; + + if ((*ppos > max_size) || + (*ppos + count > max_size) || + (*ppos + count < count) || + (count > uncopied_bytes)) + return -EINVAL; + + if (copy_from_user(buf + (*ppos), user_buf, count)) { + kfree(buf); + buf = NULL; + return -EFAULT; + } + + uncopied_bytes -= count; + *ppos += count; + + if (!uncopied_bytes) { + status = acpi_install_method(buf); + kfree(buf); + buf = NULL; + if (ACPI_FAILURE(status)) + return -EINVAL; + add_taint(TAINT_OVERRIDDEN_ACPI_TABLE); + } + + return count; +} + +static const struct file_operations cm_fops = { + .write = cm_write, + .llseek = default_llseek, +}; + +static int __init acpi_custom_method_init(void) +{ + if (acpi_debugfs_dir == NULL) + return -ENOENT; + + cm_dentry = debugfs_create_file("custom_method", S_IWUSR, + acpi_debugfs_dir, NULL, &cm_fops); + if (cm_dentry == NULL) + return -ENODEV; + + return 0; +} + +static void __exit acpi_custom_method_exit(void) +{ + if (cm_dentry) + debugfs_remove(cm_dentry); + } + +module_init(acpi_custom_method_init); +module_exit(acpi_custom_method_exit); diff --git a/drivers/acpi/debugfs.c b/drivers/acpi/debugfs.c index e7abc6e3bba0..182a9fc36355 100644 --- a/drivers/acpi/debugfs.c +++ b/drivers/acpi/debugfs.c @@ -3,9 +3,6 @@ */ #include -#include -#include -#include #include #include @@ -13,84 +10,9 @@ ACPI_MODULE_NAME("debugfs"); struct dentry *acpi_debugfs_dir; -static struct dentry *cm_dentry; - -/* /sys/kernel/debug/acpi/custom_method */ - -static ssize_t cm_write(struct file *file, const char __user * user_buf, - size_t count, loff_t *ppos) -{ - static char *buf; - static u32 max_size; - static u32 uncopied_bytes; - - struct acpi_table_header table; - acpi_status status; - - if (!(*ppos)) { - /* parse the table header to get the table length */ - if (count <= sizeof(struct acpi_table_header)) - return -EINVAL; - if (copy_from_user(&table, user_buf, - sizeof(struct acpi_table_header))) - return -EFAULT; - uncopied_bytes = max_size = table.length; - buf = kzalloc(max_size, GFP_KERNEL); - if (!buf) - return -ENOMEM; - } - - if (buf == NULL) - return -EINVAL; - - if ((*ppos > max_size) || - (*ppos + count > max_size) || - (*ppos + count < count) || - (count > uncopied_bytes)) - return -EINVAL; - - if (copy_from_user(buf + (*ppos), user_buf, count)) { - kfree(buf); - buf = NULL; - return -EFAULT; - } - - uncopied_bytes -= count; - *ppos += count; - - if (!uncopied_bytes) { - status = acpi_install_method(buf); - kfree(buf); - buf = NULL; - if (ACPI_FAILURE(status)) - return -EINVAL; - add_taint(TAINT_OVERRIDDEN_ACPI_TABLE); - } - - return count; -} - -static const struct file_operations cm_fops = { - .write = cm_write, - .llseek = default_llseek, -}; - -static int __init acpi_custom_method_init(void) -{ - if (!acpi_debugfs_dir) - return -ENOENT; - - cm_dentry = debugfs_create_file("custom_method", S_IWUSR, - acpi_debugfs_dir, NULL, &cm_fops); - if (!cm_dentry) - return -ENODEV; - - return 0; -} +EXPORT_SYMBOL_GPL(acpi_debugfs_dir); void __init acpi_debugfs_init(void) { acpi_debugfs_dir = debugfs_create_dir("acpi", NULL); - - acpi_custom_method_init(); } -- cgit v1.2.3 From 5be7ef002469eaf757065ee16b4100c6d3ead1cc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 28 May 2011 17:26:40 -0700 Subject: scsi: fix scsi_proc new kernel-doc warning Fix kernel-doc warnings in scsi_proc.c: Warning(drivers/scsi/scsi_proc.c:390): No description found for parameter 'dev' Warning(drivers/scsi/scsi_proc.c:390): No description found for parameter 'data' Warning(drivers/scsi/scsi_proc.c:390): Excess function parameter 's' description in 'always_match' Warning(drivers/scsi/scsi_proc.c:390): Excess function parameter 'p' description in 'always_match' Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- drivers/scsi/scsi_proc.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/scsi/scsi_proc.c b/drivers/scsi/scsi_proc.c index f46855cd853d..ad747dc337da 100644 --- a/drivers/scsi/scsi_proc.c +++ b/drivers/scsi/scsi_proc.c @@ -381,11 +381,6 @@ static ssize_t proc_scsi_write(struct file *file, const char __user *buf, return err; } -/** - * proc_scsi_show - show contents of /proc/scsi/scsi (attached devices) - * @s: output goes here - * @p: not used - */ static int always_match(struct device *dev, void *data) { return 1; -- cgit v1.2.3 From 932df7414336a00f45e5aec62724cf736b0bcfd4 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Mon, 16 May 2011 09:11:00 +0800 Subject: ACPI: processor: fix processor_physically_present in UP kernel Usually, there are multiple processors defined in ACPI table, for example Scope (_PR) { Processor (CPU0, 0x00, 0x00000410, 0x06) {} Processor (CPU1, 0x01, 0x00000410, 0x06) {} Processor (CPU2, 0x02, 0x00000410, 0x06) {} Processor (CPU3, 0x03, 0x00000410, 0x06) {} } processor_physically_present(...) will be called to check whether those processors are physically present. Currently we have below codes in processor_physically_present, cpuid = acpi_get_cpuid(...); if ((cpuid == -1) && (num_possible_cpus() > 1)) return false; return true; In UP kernel, acpi_get_cpuid(...) always return -1 and num_possible_cpus() always return 1, so processor_physically_present(...) always returns true for all passed in processor handles. This is wrong for UP processor or SMP processor running UP kernel. This patch removes the !SMP version of acpi_get_cpuid(), so both UP and SMP kernel use the same acpi_get_cpuid function. And for UP kernel, only processor 0 is valid. https://bugzilla.kernel.org/show_bug.cgi?id=16548 https://bugzilla.kernel.org/show_bug.cgi?id=16357 Tested-by: Anton Kochkov Tested-by: Ambroz Bizjak Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/acpi/processor_core.c | 12 +++++++++--- include/acpi/processor.h | 7 ------- 2 files changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 25bf17da69fd..02d2a4c9084d 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -37,7 +37,6 @@ static struct dmi_system_id __initdata processor_idle_dmi_table[] = { {}, }; -#ifdef CONFIG_SMP static int map_lapic_id(struct acpi_subtable_header *entry, u32 acpi_id, int *apic_id) { @@ -165,7 +164,9 @@ exit: int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id) { +#ifdef CONFIG_SMP int i; +#endif int apic_id = -1; apic_id = map_mat_entry(handle, type, acpi_id); @@ -174,14 +175,19 @@ int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id) if (apic_id == -1) return apic_id; +#ifdef CONFIG_SMP for_each_possible_cpu(i) { if (cpu_physical_id(i) == apic_id) return i; } +#else + /* In UP kernel, only processor 0 is valid */ + if (apic_id == 0) + return apic_id; +#endif return -1; } EXPORT_SYMBOL_GPL(acpi_get_cpuid); -#endif static bool __init processor_physically_present(acpi_handle handle) { @@ -217,7 +223,7 @@ static bool __init processor_physically_present(acpi_handle handle) type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0; cpuid = acpi_get_cpuid(handle, type, acpi_id); - if ((cpuid == -1) && (num_possible_cpus() > 1)) + if (cpuid == -1) return false; return true; diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 55192ac0cede..ba4928cae473 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -310,14 +310,7 @@ static inline int acpi_processor_get_bios_limit(int cpu, unsigned int *limit) /* in processor_core.c */ void acpi_processor_set_pdc(acpi_handle handle); -#ifdef CONFIG_SMP int acpi_get_cpuid(acpi_handle, int type, u32 acpi_id); -#else -static inline int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id) -{ - return -1; -} -#endif /* in processor_throttling.c */ int acpi_processor_tstate_has_changed(struct acpi_processor *pr); -- cgit v1.2.3 From 28c2103dad04dba29ba86e22dad5735db8f0e13c Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Wed, 4 May 2011 22:56:43 +0800 Subject: ACPI: Add D3 cold state MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit _SxW returns an Integer containing the lowest D-state supported in state Sx. If OSPM has not indicated that it supports _PR3, then the value “3†corresponds to D3. If it has indicated _PR3 support, the value “3†represents D3hot and the value “4†represents D3cold. Linux does set _OSC._PR3, so we should fix it to expect that _SxW can return 4. Signed-off-by: Lin Ming Acked-by: Jesse Barnes Signed-off-by: Len Brown --- drivers/acpi/bus.c | 2 +- drivers/pci/pci-acpi.c | 2 ++ include/acpi/actypes.h | 5 +++-- 3 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 9749980ca6ca..d1e06c182cdb 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -227,7 +227,7 @@ static int __acpi_bus_set_power(struct acpi_device *device, int state) acpi_status status = AE_OK; char object_name[5] = { '_', 'P', 'S', '0' + state, '\0' }; - if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3)) + if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD)) return -EINVAL; /* Make sure this is a valid target state */ diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 7c3b18e78cee..d36f41ea8cbf 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -195,6 +195,8 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) return PCI_D2; case ACPI_STATE_D3: return PCI_D3hot; + case ACPI_STATE_D3_COLD: + return PCI_D3cold; } return PCI_POWER_ERROR; } diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h index 64f838beaabf..f72cbe574296 100644 --- a/include/acpi/actypes.h +++ b/include/acpi/actypes.h @@ -501,8 +501,9 @@ typedef u64 acpi_integer; #define ACPI_STATE_D1 (u8) 1 #define ACPI_STATE_D2 (u8) 2 #define ACPI_STATE_D3 (u8) 3 -#define ACPI_D_STATES_MAX ACPI_STATE_D3 -#define ACPI_D_STATE_COUNT 4 +#define ACPI_STATE_D3_COLD (u8) 4 +#define ACPI_D_STATES_MAX ACPI_STATE_D3_COLD +#define ACPI_D_STATE_COUNT 5 #define ACPI_STATE_C0 (u8) 0 #define ACPI_STATE_C1 (u8) 1 -- cgit v1.2.3 From 08b53f0e6b565fe8dc0b8f929960ed16d76291bd Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Tue, 26 Apr 2011 16:29:55 +0800 Subject: ACPI EC: remove redundant code ec->handle is set in ec_parse_device(), so don't bother to set it again. Signed-off-by: Zhang Rui Signed-off-by: Len Brown --- drivers/acpi/ec.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index b3f1d6f52a89..ed8cf17cf03c 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -804,8 +804,6 @@ static int acpi_ec_add(struct acpi_device *device) return -EINVAL; } - ec->handle = device->handle; - /* Find and register all query methods */ acpi_walk_namespace(ACPI_TYPE_METHOD, ec->handle, 1, acpi_ec_register_query_methods, NULL, ec, NULL); -- cgit v1.2.3 From 02c68a02018669d1817c43c42de800975cbec467 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 1 Apr 2011 16:59:53 -0400 Subject: x86 idle: clarify AMD erratum 400 workaround The workaround for AMD erratum 400 uses the term "c1e" falsely suggesting: 1. Intel C1E is somehow involved 2. All AMD processors with C1E are involved Use the string "amd_c1e" instead of simply "c1e" to clarify that this workaround is specific to AMD's version of C1E. Use the string "e400" to clarify that the workaround is specific to AMD processors with Erratum 400. This patch is text-substitution only, with no functional change. cc: x86@kernel.org Acked-by: Borislav Petkov Signed-off-by: Len Brown --- arch/x86/include/asm/acpi.h | 2 +- arch/x86/include/asm/idle.h | 2 +- arch/x86/include/asm/processor.h | 4 ++-- arch/x86/kernel/cpu/common.c | 2 +- arch/x86/kernel/process.c | 38 +++++++++++++++++++------------------- arch/x86/kernel/smpboot.c | 2 +- drivers/acpi/processor_idle.c | 2 +- 7 files changed, 26 insertions(+), 26 deletions(-) diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 4ea15ca89b2b..52fd57f95c50 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -138,7 +138,7 @@ static inline unsigned int acpi_processor_cstate_check(unsigned int max_cstate) boot_cpu_data.x86_model <= 0x05 && boot_cpu_data.x86_mask < 0x0A) return 1; - else if (c1e_detected) + else if (amd_e400_c1e_detected) return 1; else return max_cstate; diff --git a/arch/x86/include/asm/idle.h b/arch/x86/include/asm/idle.h index 38d87379e270..f49253d75710 100644 --- a/arch/x86/include/asm/idle.h +++ b/arch/x86/include/asm/idle.h @@ -16,6 +16,6 @@ static inline void enter_idle(void) { } static inline void exit_idle(void) { } #endif /* CONFIG_X86_64 */ -void c1e_remove_cpu(int cpu); +void amd_e400_remove_cpu(int cpu); #endif /* _ASM_X86_IDLE_H */ diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 45636cefa186..b9c03fb3369a 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -758,10 +758,10 @@ static inline void __sti_mwait(unsigned long eax, unsigned long ecx) extern void mwait_idle_with_hints(unsigned long eax, unsigned long ecx); extern void select_idle_routine(const struct cpuinfo_x86 *c); -extern void init_c1e_mask(void); +extern void init_amd_e400_c1e_mask(void); extern unsigned long boot_option_idle_override; -extern bool c1e_detected; +extern bool amd_e400_c1e_detected; enum idle_boot_override {IDLE_NO_OVERRIDE=0, IDLE_HALT, IDLE_NOMWAIT, IDLE_POLL, IDLE_FORCE_MWAIT}; diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 1d59834396bd..745a602f204f 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -887,7 +887,7 @@ static void vgetcpu_set_mode(void) void __init identify_boot_cpu(void) { identify_cpu(&boot_cpu_data); - init_c1e_mask(); + init_amd_e400_c1e_mask(); #ifdef CONFIG_X86_32 sysenter_setup(); enable_sep_cpu(); diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index ff4554198981..2efbfb712fb7 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -538,45 +538,45 @@ int mwait_usable(const struct cpuinfo_x86 *c) return (edx & MWAIT_EDX_C1); } -bool c1e_detected; -EXPORT_SYMBOL(c1e_detected); +bool amd_e400_c1e_detected; +EXPORT_SYMBOL(amd_e400_c1e_detected); -static cpumask_var_t c1e_mask; +static cpumask_var_t amd_e400_c1e_mask; -void c1e_remove_cpu(int cpu) +void amd_e400_remove_cpu(int cpu) { - if (c1e_mask != NULL) - cpumask_clear_cpu(cpu, c1e_mask); + if (amd_e400_c1e_mask != NULL) + cpumask_clear_cpu(cpu, amd_e400_c1e_mask); } /* - * C1E aware idle routine. We check for C1E active in the interrupt + * AMD Erratum 400 aware idle routine. We check for C1E active in the interrupt * pending message MSR. If we detect C1E, then we handle it the same * way as C3 power states (local apic timer and TSC stop) */ -static void c1e_idle(void) +static void amd_e400_idle(void) { if (need_resched()) return; - if (!c1e_detected) { + if (!amd_e400_c1e_detected) { u32 lo, hi; rdmsr(MSR_K8_INT_PENDING_MSG, lo, hi); if (lo & K8_INTP_C1E_ACTIVE_MASK) { - c1e_detected = true; + amd_e400_c1e_detected = true; if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) mark_tsc_unstable("TSC halt in AMD C1E"); printk(KERN_INFO "System has AMD C1E enabled\n"); } } - if (c1e_detected) { + if (amd_e400_c1e_detected) { int cpu = smp_processor_id(); - if (!cpumask_test_cpu(cpu, c1e_mask)) { - cpumask_set_cpu(cpu, c1e_mask); + if (!cpumask_test_cpu(cpu, amd_e400_c1e_mask)) { + cpumask_set_cpu(cpu, amd_e400_c1e_mask); /* * Force broadcast so ACPI can not interfere. */ @@ -619,17 +619,17 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) pm_idle = mwait_idle; } else if (cpu_has_amd_erratum(amd_erratum_400)) { /* E400: APIC timer interrupt does not wake up CPU from C1e */ - printk(KERN_INFO "using C1E aware idle routine\n"); - pm_idle = c1e_idle; + printk(KERN_INFO "using AMD E400 aware idle routine\n"); + pm_idle = amd_e400_idle; } else pm_idle = default_idle; } -void __init init_c1e_mask(void) +void __init init_amd_e400_c1e_mask(void) { - /* If we're using c1e_idle, we need to allocate c1e_mask. */ - if (pm_idle == c1e_idle) - zalloc_cpumask_var(&c1e_mask, GFP_KERNEL); + /* If we're using amd_e400_idle, we need to allocate amd_e400_c1e_mask. */ + if (pm_idle == amd_e400_idle) + zalloc_cpumask_var(&amd_e400_c1e_mask, GFP_KERNEL); } static int __init idle_setup(char *str) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 08776a953487..2c33633595cc 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1379,7 +1379,7 @@ void play_dead_common(void) { idle_task_exit(); reset_lazy_tlbstate(); - c1e_remove_cpu(raw_smp_processor_id()); + amd_e400_remove_cpu(raw_smp_processor_id()); mb(); /* Ack it */ diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index d615b7d69bca..431ab11c8c1b 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -161,7 +161,7 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr, if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) return; - if (c1e_detected) + if (amd_e400_c1e_detected) type = ACPI_STATE_C1; /* -- cgit v1.2.3 From 06ae40ce073daf233607a3c54a489f2c1e44683e Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 1 Apr 2011 15:28:09 -0400 Subject: x86 idle: EXPORT_SYMBOL(default_idle, pm_idle) only when APM demands it In the long run, we don't want default_idle() or (pm_idle)() to be exported outside of process.c. Start by not exporting them to modules, unless the APM build demands it. cc: x86@kernel.org cc: Jiri Kosina Signed-off-by: Len Brown --- arch/x86/kernel/process.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 2efbfb712fb7..84f3cdae4407 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -340,7 +340,9 @@ EXPORT_SYMBOL(boot_option_idle_override); * Powermanagement idle function, if any.. */ void (*pm_idle)(void); +#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE) EXPORT_SYMBOL(pm_idle); +#endif #ifdef CONFIG_X86_32 /* @@ -400,7 +402,7 @@ void default_idle(void) cpu_relax(); } } -#ifdef CONFIG_APM_MODULE +#if defined(CONFIG_APM_MODULE) && defined(CONFIG_APM_CPU_IDLE) EXPORT_SYMBOL(default_idle); #endif -- cgit v1.2.3 From 3b70b2e5fcf6315eb833a1bcc2b810bdc75484ff Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 1 Apr 2011 15:08:48 -0400 Subject: x86 idle floppy: deprecate disable_hlt() Plan to remove floppy_disable_hlt in 2012, an ancient workaround with comments that it should be removed. This allows us to remove clutter and a run-time branch from the idle code. WARN_ONCE() on invocation until it is removed. cc: x86@kernel.org cc: stable@kernel.org # .39.x Signed-off-by: Len Brown --- Documentation/feature-removal-schedule.txt | 8 ++++++++ drivers/block/floppy.c | 1 + 2 files changed, 9 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index b3f35e5f9c95..5540615ac26c 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -6,6 +6,14 @@ be removed from this file. --------------------------- +What: x86 floppy disable_hlt +When: 2012 +Why: ancient workaround of dubious utility clutters the + code used by everybody else. +Who: Len Brown + +--------------------------- + What: PRISM54 When: 2.6.34 diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 77fc76f8aea9..20aea9b511b5 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -1038,6 +1038,7 @@ static void floppy_disable_hlt(void) { unsigned long flags; + WARN_ONCE(1, "floppy_disable_hlt() scheduled for removal in 2012"); spin_lock_irqsave(&floppy_hlt_lock, flags); if (!hlt_disabled) { hlt_disabled = 1; -- cgit v1.2.3 From 99c63221435963e0cee2402686ba99293c2ffa9e Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 1 Apr 2011 15:19:23 -0400 Subject: x86 idle APM: deprecate CONFIG_APM_CPU_IDLE We don't want to export the pm_idle function pointer to modules. Currently CONFIG_APM_CPU_IDLE w/ CONFIG_APM_MODULE forces us to. CONFIG_APM_CPU_IDLE is of dubious value, it runs only on 32-bit uniprocessor laptops that are over 10 years old. It calls into the BIOS during idle, and is known to cause a number of machines to fail. Removing CONFIG_APM_CPU_IDLE and will allow us to stop exporting pm_idle. Any systems that were calling into the APM BIOS at run-time will simply use HLT instead. cc: x86@kernel.org cc: Jiri Kosina cc: stable@kernel.org # .39.x Signed-off-by: Len Brown --- Documentation/feature-removal-schedule.txt | 10 ++++++++++ arch/x86/kernel/apm_32.c | 2 ++ 2 files changed, 12 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 5540615ac26c..fc505c1b4762 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -14,6 +14,16 @@ Who: Len Brown --------------------------- +What: CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle +When: 2012 +Why: This optional sub-feature of APM is of dubious reliability, + and ancient APM laptops are likely better served by calling HLT. + Deleting CONFIG_APM_CPU_IDLE allows x86 to stop exporting + the pm_idle function pointer to modules. +Who: Len Brown + +---------------------------- + What: PRISM54 When: 2.6.34 diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index 0e4f24c2a746..4c4ac32cd126 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -359,6 +359,7 @@ struct apm_user { * idle percentage above which bios idle calls are done */ #ifdef CONFIG_APM_CPU_IDLE +#warning deprecated CONFIG_APM_CPU_IDLE will be deleted in 2012 #define DEFAULT_IDLE_THRESHOLD 95 #else #define DEFAULT_IDLE_THRESHOLD 100 @@ -902,6 +903,7 @@ static void apm_cpu_idle(void) unsigned int jiffies_since_last_check = jiffies - last_jiffies; unsigned int bucket; + WARN_ONCE(1, "deprecated apm_cpu_idle will be deleted in 2012"); recalc: if (jiffies_since_last_check > IDLE_CALC_LIMIT) { use_apm_idle = 0; -- cgit v1.2.3 From cdaab4a0d330f70c0e5ad8c3f7c65c2e375ea180 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 1 Apr 2011 15:41:17 -0400 Subject: x86 idle: deprecate "no-hlt" cmdline param We'd rather that modern machines not check if HLT works on every entry into idle, for the benefit of machines that had marginal electricals 15-years ago. If those machines are still running the upstream kernel, they can use "idle=poll". The only difference will be that they'll now invoke HLT in machine_hlt(). cc: x86@kernel.org # .39.x Signed-off-by: Len Brown --- Documentation/feature-removal-schedule.txt | 11 +++++++++++ arch/x86/kernel/cpu/bugs.c | 1 + 2 files changed, 12 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index fc505c1b4762..f1b0eb02aa1d 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -24,6 +24,17 @@ Who: Len Brown ---------------------------- +What: x86_32 "no-hlt" cmdline param +When: 2012 +Why: remove a branch from idle path, simplify code used by everybody. + This option disabled the use of HLT in idle and machine_halt() + for hardware that was flakey 15-years ago. Today we have + "idle=poll" that removed HLT from idle, and so if such a machine + is still running the upstream kernel, "idle=poll" is likely sufficient. +Who: Len Brown + +---------------------------- + What: PRISM54 When: 2.6.34 diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index c39576cb3018..525514cf33c3 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -19,6 +19,7 @@ static int __init no_halt(char *s) { + WARN_ONCE(1, "\"no-hlt\" is deprecated, please use \"idle=poll\"\n"); boot_cpu_data.hlt_works_ok = 0; return 1; } -- cgit v1.2.3 From 5d4c47e0195b989f284907358bd5c268a44b91c7 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 1 Apr 2011 15:46:09 -0400 Subject: x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param mwait_idle() is a C1-only idle loop intended to be more efficient than HLT on SMP hardware that supports it. But mwait_idle() has been replaced by the more general mwait_idle_with_hints(), which handles both C1 and deeper C-states. ACPI uses only mwait_idle_with_hints(), and never uses mwait_idle(). Deprecate mwait_idle() and the "idle=mwait" cmdline param to simplify the x86 idle code. After this change, kernels configured with (!CONFIG_ACPI=n && !CONFIG_INTEL_IDLE=n) when run on hardware that support MWAIT will simply use HLT. If MWAIT is desired on those systems, cpuidle and the cpuidle drivers above can be used. cc: x86@kernel.org cc: stable@kernel.org # .39.x Signed-off-by: Len Brown --- Documentation/feature-removal-schedule.txt | 7 +++++++ arch/x86/kernel/process.c | 1 + 2 files changed, 8 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index f1b0eb02aa1d..13f0bb3187bc 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -35,6 +35,13 @@ Who: Len Brown ---------------------------- +What: x86 "idle=mwait" cmdline param +When: 2012 +Why: simplify x86 idle code +Who: Len Brown + +---------------------------- + What: PRISM54 When: 2.6.34 diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 84f3cdae4407..8fb182956cbc 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -645,6 +645,7 @@ static int __init idle_setup(char *str) boot_option_idle_override = IDLE_POLL; } else if (!strcmp(str, "mwait")) { boot_option_idle_override = IDLE_FORCE_MWAIT; + WARN_ONCE(1, "\idle=mwait\" will be removed in 2012\"\n"); } else if (!strcmp(str, "halt")) { /* * When the boot option of idle=halt is added, halt is -- cgit v1.2.3 From d5b72ce15ea99a0b8f0d1973074c584daf92d70e Mon Sep 17 00:00:00 2001 From: Phillip Lougher Date: Sun, 29 May 2011 00:38:46 +0100 Subject: Squashfs: Fix sanity check patches on big-endian systems le64 values should be swapped when accessing on big-endian systems. Signed-off-by: Phillip Lougher --- fs/squashfs/export.c | 2 +- fs/squashfs/fragment.c | 2 +- fs/squashfs/id.c | 2 +- fs/squashfs/super.c | 6 +++--- 4 files changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/squashfs/export.c b/fs/squashfs/export.c index 730c56248c9b..5e1101ff276f 100644 --- a/fs/squashfs/export.c +++ b/fs/squashfs/export.c @@ -147,7 +147,7 @@ __le64 *squashfs_read_inode_lookup_table(struct super_block *sb, * table[0] points to the first inode lookup table metadata block, * this should be less than lookup_table_start */ - if (!IS_ERR(table) && table[0] >= lookup_table_start) { + if (!IS_ERR(table) && le64_to_cpu(table[0]) >= lookup_table_start) { kfree(table); return ERR_PTR(-EINVAL); } diff --git a/fs/squashfs/fragment.c b/fs/squashfs/fragment.c index 1516a6490bfb..0ed6edbc5c71 100644 --- a/fs/squashfs/fragment.c +++ b/fs/squashfs/fragment.c @@ -90,7 +90,7 @@ __le64 *squashfs_read_fragment_index_table(struct super_block *sb, * table[0] points to the first fragment table metadata block, this * should be less than fragment_table_start */ - if (!IS_ERR(table) && table[0] >= fragment_table_start) { + if (!IS_ERR(table) && le64_to_cpu(table[0]) >= fragment_table_start) { kfree(table); return ERR_PTR(-EINVAL); } diff --git a/fs/squashfs/id.c b/fs/squashfs/id.c index a70858e0fb44..d38ea3dab951 100644 --- a/fs/squashfs/id.c +++ b/fs/squashfs/id.c @@ -93,7 +93,7 @@ __le64 *squashfs_read_id_index_table(struct super_block *sb, * table[0] points to the first id lookup table metadata block, this * should be less than id_table_start */ - if (!IS_ERR(table) && table[0] >= id_table_start) { + if (!IS_ERR(table) && le64_to_cpu(table[0]) >= id_table_start) { kfree(table); return ERR_PTR(-EINVAL); } diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c index 6f26abee3597..7438850c62d0 100644 --- a/fs/squashfs/super.c +++ b/fs/squashfs/super.c @@ -245,7 +245,7 @@ allocate_id_index_table: msblk->id_table = NULL; goto failed_mount; } - next_table = msblk->id_table[0]; + next_table = le64_to_cpu(msblk->id_table[0]); /* Handle inode lookup table */ lookup_table_start = le64_to_cpu(sblk->lookup_table_start); @@ -261,7 +261,7 @@ allocate_id_index_table: msblk->inode_lookup_table = NULL; goto failed_mount; } - next_table = msblk->inode_lookup_table[0]; + next_table = le64_to_cpu(msblk->inode_lookup_table[0]); sb->s_export_op = &squashfs_export_ops; @@ -286,7 +286,7 @@ handle_fragments: msblk->fragment_index = NULL; goto failed_mount; } - next_table = msblk->fragment_index[0]; + next_table = le64_to_cpu(msblk->fragment_index[0]); check_directory_table: /* Sanity check directory_table */ -- cgit v1.2.3 From 3b6445a6f68b839d1b437756b9c72312e33339b2 Mon Sep 17 00:00:00 2001 From: Jim Rees Date: Tue, 22 Feb 2011 19:31:57 -0500 Subject: NFSv4.1: fix typo in filelayout_check_layout Signed-off-by: Jim Rees Signed-off-by: Benny Halevy --- fs/nfs/nfs4filelayout.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index be79dc9f386d..dd6ccf007673 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -428,7 +428,7 @@ filelayout_check_layout(struct pnfs_layout_hdr *lo, dprintk("--> %s\n", __func__); if (fl->pattern_offset > lgr->range.offset) { - dprintk("%s pattern_offset %lld to large\n", + dprintk("%s pattern_offset %lld too large\n", __func__, fl->pattern_offset); goto out; } -- cgit v1.2.3 From 67d51f65bde233b17de304baec4f7c4d086471fe Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Fri, 20 May 2011 10:45:05 +0200 Subject: NFSv4.1: use struct nfs_client to qualify deviceid deviceids are unique per server, per layout type. Therefore, in the global cache in the files layout driver deviceids from different servers may clash so we need to qualify them with a struct nfs_client that represents the nfs server that returned the deviceid. Introduced in 2.6.39 commit ea8eecdd "NFSv4.1 move deviceid cache to filelayout driver" Signed-off-by: Benny Halevy --- fs/nfs/nfs4filelayout.c | 2 +- fs/nfs/nfs4filelayout.h | 3 ++- fs/nfs/nfs4filelayoutdev.c | 9 ++++----- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index dd6ccf007673..571c1b032e9d 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -440,7 +440,7 @@ filelayout_check_layout(struct pnfs_layout_hdr *lo, } /* find and reference the deviceid */ - dsaddr = nfs4_fl_find_get_deviceid(id); + dsaddr = nfs4_fl_find_get_deviceid(NFS_SERVER(lo->plh_inode)->nfs_client, id); if (dsaddr == NULL) { dsaddr = get_device_info(lo->plh_inode, id, gfp_flags); if (dsaddr == NULL) diff --git a/fs/nfs/nfs4filelayout.h b/fs/nfs/nfs4filelayout.h index 2b461d77b43a..301b95568bd2 100644 --- a/fs/nfs/nfs4filelayout.h +++ b/fs/nfs/nfs4filelayout.h @@ -60,6 +60,7 @@ struct nfs4_pnfs_ds { struct nfs4_file_layout_dsaddr { struct hlist_node node; + struct nfs_client *nfs_client; struct nfs4_deviceid deviceid; atomic_t ref; unsigned long flags; @@ -101,7 +102,7 @@ u32 nfs4_fl_calc_ds_index(struct pnfs_layout_segment *lseg, u32 j); struct nfs4_pnfs_ds *nfs4_fl_prepare_ds(struct pnfs_layout_segment *lseg, u32 ds_idx); extern struct nfs4_file_layout_dsaddr * -nfs4_fl_find_get_deviceid(struct nfs4_deviceid *dev_id); +nfs4_fl_find_get_deviceid(struct nfs_client *, struct nfs4_deviceid *dev_id); extern void nfs4_fl_put_deviceid(struct nfs4_file_layout_dsaddr *dsaddr); struct nfs4_file_layout_dsaddr * get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags); diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index db07c7af1395..42e326637271 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -431,7 +431,7 @@ decode_device(struct inode *ino, struct pnfs_device *pdev, gfp_t gfp_flags) dsaddr->stripe_indices = stripe_indices; stripe_indices = NULL; dsaddr->ds_num = num; - + dsaddr->nfs_client = NFS_SERVER(ino)->nfs_client; memcpy(&dsaddr->deviceid, &pdev->dev_id, sizeof(pdev->dev_id)); for (i = 0; i < dsaddr->ds_num; i++) { @@ -516,7 +516,7 @@ decode_and_add_device(struct inode *inode, struct pnfs_device *dev, gfp_t gfp_fl } spin_lock(&filelayout_deviceid_lock); - d = nfs4_fl_find_get_deviceid(&new->deviceid); + d = nfs4_fl_find_get_deviceid(new->nfs_client, &new->deviceid); if (d) { spin_unlock(&filelayout_deviceid_lock); nfs4_fl_free_deviceid(new); @@ -610,16 +610,15 @@ nfs4_fl_put_deviceid(struct nfs4_file_layout_dsaddr *dsaddr) } struct nfs4_file_layout_dsaddr * -nfs4_fl_find_get_deviceid(struct nfs4_deviceid *id) +nfs4_fl_find_get_deviceid(struct nfs_client *clp, struct nfs4_deviceid *id) { struct nfs4_file_layout_dsaddr *d; struct hlist_node *n; long hash = nfs4_fl_deviceid_hash(id); - rcu_read_lock(); hlist_for_each_entry_rcu(d, n, &filelayout_deviceid_cache[hash], node) { - if (!memcmp(&d->deviceid, id, sizeof(*id))) { + if (d->nfs_client == clp && !memcmp(&d->deviceid, id, sizeof(*id))) { if (!atomic_inc_not_zero(&d->ref)) goto fail; rcu_read_unlock(); -- cgit v1.2.3 From 45df3c8b0f3a58facb125d7631890426706c0bfa Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Thu, 5 May 2011 08:28:46 +0300 Subject: pnfs: resolve header dependency in pnfs.h Some definitions in the header file depend on nfs_fs.h so pnfs.h can't be included independently. Signed-off-by: Benny Halevy --- fs/nfs/pnfs.h | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 0c015bad9e7a..720bb9da3f9b 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -30,6 +30,7 @@ #ifndef FS_NFS_PNFS_H #define FS_NFS_PNFS_H +#include #include enum { -- cgit v1.2.3 From a1eaecbc4c8307e27772d6584ef85a2e93250661 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Thu, 19 May 2011 22:14:47 -0400 Subject: NFSv4.1: make deviceid cache global Move deviceid cache from the pnfs files layout driver to the generic layer in preparation for the objects layout driver. Signed-off-by: Benny Halevy --- fs/nfs/Makefile | 2 +- fs/nfs/nfs4filelayout.c | 10 +-- fs/nfs/nfs4filelayout.h | 8 +-- fs/nfs/nfs4filelayoutdev.c | 104 ++++-------------------------- fs/nfs/pnfs.h | 17 +++++ fs/nfs/pnfs_dev.c | 156 +++++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 194 insertions(+), 103 deletions(-) create mode 100644 fs/nfs/pnfs_dev.c diff --git a/fs/nfs/Makefile b/fs/nfs/Makefile index 4776ff9e3814..7516a8aaa42e 100644 --- a/fs/nfs/Makefile +++ b/fs/nfs/Makefile @@ -15,7 +15,7 @@ nfs-$(CONFIG_NFS_V4) += nfs4proc.o nfs4xdr.o nfs4state.o nfs4renewd.o \ delegation.o idmap.o \ callback.o callback_xdr.o callback_proc.o \ nfs4namespace.o -nfs-$(CONFIG_NFS_V4_1) += pnfs.o +nfs-$(CONFIG_NFS_V4_1) += pnfs.o pnfs_dev.o nfs-$(CONFIG_SYSCTL) += sysctl.o nfs-$(CONFIG_NFS_FSCACHE) += fscache.o fscache-index.o diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 571c1b032e9d..4c67a6f6519d 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -421,6 +421,7 @@ filelayout_check_layout(struct pnfs_layout_hdr *lo, struct nfs4_deviceid *id, gfp_t gfp_flags) { + struct nfs4_deviceid_node *d; struct nfs4_file_layout_dsaddr *dsaddr; int status = -EINVAL; struct nfs_server *nfss = NFS_SERVER(lo->plh_inode); @@ -440,12 +441,13 @@ filelayout_check_layout(struct pnfs_layout_hdr *lo, } /* find and reference the deviceid */ - dsaddr = nfs4_fl_find_get_deviceid(NFS_SERVER(lo->plh_inode)->nfs_client, id); - if (dsaddr == NULL) { + d = nfs4_find_get_deviceid(NFS_SERVER(lo->plh_inode)->nfs_client, id); + if (d == NULL) { dsaddr = get_device_info(lo->plh_inode, id, gfp_flags); if (dsaddr == NULL) goto out; - } + } else + dsaddr = container_of(d, struct nfs4_file_layout_dsaddr, id_node); fl->dsaddr = dsaddr; if (fl->first_stripe_index < 0 || @@ -535,7 +537,7 @@ filelayout_decode_layout(struct pnfs_layout_hdr *flo, memcpy(id, p, sizeof(*id)); p += XDR_QUADLEN(NFS4_DEVICEID4_SIZE); - print_deviceid(id); + nfs4_print_deviceid(id); nfl_util = be32_to_cpup(p++); if (nfl_util & NFL4_UFLG_COMMIT_THRU_MDS) diff --git a/fs/nfs/nfs4filelayout.h b/fs/nfs/nfs4filelayout.h index 301b95568bd2..0ace0a2d6d7d 100644 --- a/fs/nfs/nfs4filelayout.h +++ b/fs/nfs/nfs4filelayout.h @@ -59,10 +59,7 @@ struct nfs4_pnfs_ds { #define NFS4_DEVICE_ID_NEG_ENTRY 0x00000001 struct nfs4_file_layout_dsaddr { - struct hlist_node node; - struct nfs_client *nfs_client; - struct nfs4_deviceid deviceid; - atomic_t ref; + struct nfs4_deviceid_node id_node; unsigned long flags; u32 stripe_count; u8 *stripe_indices; @@ -96,13 +93,10 @@ extern struct nfs_fh * nfs4_fl_select_ds_fh(struct pnfs_layout_segment *lseg, u32 j); extern void print_ds(struct nfs4_pnfs_ds *ds); -extern void print_deviceid(struct nfs4_deviceid *dev_id); u32 nfs4_fl_calc_j_index(struct pnfs_layout_segment *lseg, loff_t offset); u32 nfs4_fl_calc_ds_index(struct pnfs_layout_segment *lseg, u32 j); struct nfs4_pnfs_ds *nfs4_fl_prepare_ds(struct pnfs_layout_segment *lseg, u32 ds_idx); -extern struct nfs4_file_layout_dsaddr * -nfs4_fl_find_get_deviceid(struct nfs_client *, struct nfs4_deviceid *dev_id); extern void nfs4_fl_put_deviceid(struct nfs4_file_layout_dsaddr *dsaddr); struct nfs4_file_layout_dsaddr * get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags); diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index 42e326637271..eda4527a57eb 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -36,30 +36,6 @@ #define NFSDBG_FACILITY NFSDBG_PNFS_LD -/* - * Device ID RCU cache. A device ID is unique per client ID and layout type. - */ -#define NFS4_FL_DEVICE_ID_HASH_BITS 5 -#define NFS4_FL_DEVICE_ID_HASH_SIZE (1 << NFS4_FL_DEVICE_ID_HASH_BITS) -#define NFS4_FL_DEVICE_ID_HASH_MASK (NFS4_FL_DEVICE_ID_HASH_SIZE - 1) - -static inline u32 -nfs4_fl_deviceid_hash(struct nfs4_deviceid *id) -{ - unsigned char *cptr = (unsigned char *)id->data; - unsigned int nbytes = NFS4_DEVICEID4_SIZE; - u32 x = 0; - - while (nbytes--) { - x *= 37; - x += *cptr++; - } - return x & NFS4_FL_DEVICE_ID_HASH_MASK; -} - -static struct hlist_head filelayout_deviceid_cache[NFS4_FL_DEVICE_ID_HASH_SIZE]; -static DEFINE_SPINLOCK(filelayout_deviceid_lock); - /* * Data server cache * @@ -89,27 +65,6 @@ print_ds(struct nfs4_pnfs_ds *ds) ds->ds_clp ? ds->ds_clp->cl_exchange_flags : 0); } -void -print_ds_list(struct nfs4_file_layout_dsaddr *dsaddr) -{ - int i; - - ifdebug(FACILITY) { - printk("%s dsaddr->ds_num %d\n", __func__, - dsaddr->ds_num); - for (i = 0; i < dsaddr->ds_num; i++) - print_ds(dsaddr->ds_list[i]); - } -} - -void print_deviceid(struct nfs4_deviceid *id) -{ - u32 *p = (u32 *)id; - - dprintk("%s: device id= [%x%x%x%x]\n", __func__, - p[0], p[1], p[2], p[3]); -} - /* nfs4_ds_cache_lock is held */ static struct nfs4_pnfs_ds * _data_server_lookup_locked(u32 ip_addr, u32 port) @@ -207,7 +162,7 @@ nfs4_fl_free_deviceid(struct nfs4_file_layout_dsaddr *dsaddr) struct nfs4_pnfs_ds *ds; int i; - print_deviceid(&dsaddr->deviceid); + nfs4_print_deviceid(&dsaddr->id_node.deviceid); for (i = 0; i < dsaddr->ds_num; i++) { ds = dsaddr->ds_list[i]; @@ -431,8 +386,8 @@ decode_device(struct inode *ino, struct pnfs_device *pdev, gfp_t gfp_flags) dsaddr->stripe_indices = stripe_indices; stripe_indices = NULL; dsaddr->ds_num = num; - dsaddr->nfs_client = NFS_SERVER(ino)->nfs_client; - memcpy(&dsaddr->deviceid, &pdev->dev_id, sizeof(pdev->dev_id)); + nfs4_init_deviceid_node(&dsaddr->id_node, NFS_SERVER(ino)->nfs_client, + &pdev->dev_id); for (i = 0; i < dsaddr->ds_num; i++) { int j; @@ -505,8 +460,8 @@ out_err: static struct nfs4_file_layout_dsaddr * decode_and_add_device(struct inode *inode, struct pnfs_device *dev, gfp_t gfp_flags) { - struct nfs4_file_layout_dsaddr *d, *new; - long hash; + struct nfs4_deviceid_node *d; + struct nfs4_file_layout_dsaddr *n, *new; new = decode_device(inode, dev, gfp_flags); if (!new) { @@ -515,20 +470,13 @@ decode_and_add_device(struct inode *inode, struct pnfs_device *dev, gfp_t gfp_fl return NULL; } - spin_lock(&filelayout_deviceid_lock); - d = nfs4_fl_find_get_deviceid(new->nfs_client, &new->deviceid); - if (d) { - spin_unlock(&filelayout_deviceid_lock); + d = nfs4_insert_deviceid_node(&new->id_node); + n = container_of(d, struct nfs4_file_layout_dsaddr, id_node); + if (n != new) { nfs4_fl_free_deviceid(new); - return d; + return n; } - INIT_HLIST_NODE(&new->node); - atomic_set(&new->ref, 1); - hash = nfs4_fl_deviceid_hash(&new->deviceid); - hlist_add_head_rcu(&new->node, &filelayout_deviceid_cache[hash]); - spin_unlock(&filelayout_deviceid_lock); - return new; } @@ -600,34 +548,8 @@ out_free: void nfs4_fl_put_deviceid(struct nfs4_file_layout_dsaddr *dsaddr) { - if (atomic_dec_and_lock(&dsaddr->ref, &filelayout_deviceid_lock)) { - hlist_del_rcu(&dsaddr->node); - spin_unlock(&filelayout_deviceid_lock); - - synchronize_rcu(); + if (nfs4_put_deviceid_node(&dsaddr->id_node)) nfs4_fl_free_deviceid(dsaddr); - } -} - -struct nfs4_file_layout_dsaddr * -nfs4_fl_find_get_deviceid(struct nfs_client *clp, struct nfs4_deviceid *id) -{ - struct nfs4_file_layout_dsaddr *d; - struct hlist_node *n; - long hash = nfs4_fl_deviceid_hash(id); - - rcu_read_lock(); - hlist_for_each_entry_rcu(d, n, &filelayout_deviceid_cache[hash], node) { - if (d->nfs_client == clp && !memcmp(&d->deviceid, id, sizeof(*id))) { - if (!atomic_inc_not_zero(&d->ref)) - goto fail; - rcu_read_unlock(); - return d; - } - } -fail: - rcu_read_unlock(); - return NULL; } /* @@ -675,15 +597,15 @@ static void filelayout_mark_devid_negative(struct nfs4_file_layout_dsaddr *dsaddr, int err, u32 ds_addr) { - u32 *p = (u32 *)&dsaddr->deviceid; + u32 *p = (u32 *)&dsaddr->id_node.deviceid; printk(KERN_ERR "NFS: data server %x connection error %d." " Deviceid [%x%x%x%x] marked out of use.\n", ds_addr, err, p[0], p[1], p[2], p[3]); - spin_lock(&filelayout_deviceid_lock); + spin_lock(&nfs4_ds_cache_lock); dsaddr->flags |= NFS4_DEVICE_ID_NEG_ENTRY; - spin_unlock(&filelayout_deviceid_lock); + spin_unlock(&nfs4_ds_cache_lock); } struct nfs4_pnfs_ds * diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 720bb9da3f9b..3831ad04a231 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -157,6 +157,23 @@ bool pnfs_roc_drain(struct inode *ino, u32 *barrier); void pnfs_set_layoutcommit(struct nfs_write_data *wdata); int pnfs_layoutcommit_inode(struct inode *inode, bool sync); +/* pnfs_dev.c */ +struct nfs4_deviceid_node { + struct hlist_node node; + const struct nfs_client *nfs_client; + struct nfs4_deviceid deviceid; + atomic_t ref; +}; + +void nfs4_print_deviceid(const struct nfs4_deviceid *dev_id); +struct nfs4_deviceid_node *nfs4_find_get_deviceid(const struct nfs_client *, const struct nfs4_deviceid *); +struct nfs4_deviceid_node *nfs4_unhash_put_deviceid(const struct nfs_client *, const struct nfs4_deviceid *); +void nfs4_init_deviceid_node(struct nfs4_deviceid_node *, + const struct nfs_client *, + const struct nfs4_deviceid *); +struct nfs4_deviceid_node *nfs4_insert_deviceid_node(struct nfs4_deviceid_node *); +bool nfs4_put_deviceid_node(struct nfs4_deviceid_node *); + static inline int lo_fail_bit(u32 iomode) { return iomode == IOMODE_RW ? diff --git a/fs/nfs/pnfs_dev.c b/fs/nfs/pnfs_dev.c new file mode 100644 index 000000000000..bf05189a7cbf --- /dev/null +++ b/fs/nfs/pnfs_dev.c @@ -0,0 +1,156 @@ +/* + * Device operations for the pnfs client. + * + * Copyright (c) 2002 + * The Regents of the University of Michigan + * All Rights Reserved + * + * Dean Hildebrand + * Garth Goodson + * + * Permission is granted to use, copy, create derivative works, and + * redistribute this software and such derivative works for any purpose, + * so long as the name of the University of Michigan is not used in + * any advertising or publicity pertaining to the use or distribution + * of this software without specific, written prior authorization. If + * the above copyright notice or any other identification of the + * University of Michigan is included in any copy of any portion of + * this software, then the disclaimer below must also be included. + * + * This software is provided as is, without representation or warranty + * of any kind either express or implied, including without limitation + * the implied warranties of merchantability, fitness for a particular + * purpose, or noninfringement. The Regents of the University of + * Michigan shall not be liable for any damages, including special, + * indirect, incidental, or consequential damages, with respect to any + * claim arising out of or in connection with the use of the software, + * even if it has been or is hereafter advised of the possibility of + * such damages. + */ + +#include "pnfs.h" + +#define NFSDBG_FACILITY NFSDBG_PNFS + +/* + * Device ID RCU cache. A device ID is unique per server and layout type. + */ +#define NFS4_DEVICE_ID_HASH_BITS 5 +#define NFS4_DEVICE_ID_HASH_SIZE (1 << NFS4_DEVICE_ID_HASH_BITS) +#define NFS4_DEVICE_ID_HASH_MASK (NFS4_DEVICE_ID_HASH_SIZE - 1) + +static struct hlist_head nfs4_deviceid_cache[NFS4_DEVICE_ID_HASH_SIZE]; +static DEFINE_SPINLOCK(nfs4_deviceid_lock); + +void +nfs4_print_deviceid(const struct nfs4_deviceid *id) +{ + u32 *p = (u32 *)id; + + dprintk("%s: device id= [%x%x%x%x]\n", __func__, + p[0], p[1], p[2], p[3]); +} +EXPORT_SYMBOL_GPL(nfs4_print_deviceid); + +static inline u32 +nfs4_deviceid_hash(const struct nfs4_deviceid *id) +{ + unsigned char *cptr = (unsigned char *)id->data; + unsigned int nbytes = NFS4_DEVICEID4_SIZE; + u32 x = 0; + + while (nbytes--) { + x *= 37; + x += *cptr++; + } + return x & NFS4_DEVICE_ID_HASH_MASK; +} + +/* + * Lookup a deviceid in cache and get a reference count on it if found + * + * @clp nfs_client associated with deviceid + * @id deviceid to look up + */ +struct nfs4_deviceid_node * +nfs4_find_get_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id) +{ + struct nfs4_deviceid_node *d; + struct hlist_node *n; + long hash = nfs4_deviceid_hash(id); + + rcu_read_lock(); + hlist_for_each_entry_rcu(d, n, &nfs4_deviceid_cache[hash], node) { + if (d->nfs_client == clp && !memcmp(&d->deviceid, id, sizeof(*id))) { + if (!atomic_inc_not_zero(&d->ref)) + goto fail; + rcu_read_unlock(); + return d; + } + } +fail: + rcu_read_unlock(); + return NULL; +} +EXPORT_SYMBOL_GPL(nfs4_find_get_deviceid); + +void +nfs4_init_deviceid_node(struct nfs4_deviceid_node *d, + const struct nfs_client *nfs_client, + const struct nfs4_deviceid *id) +{ + d->nfs_client = nfs_client; + d->deviceid = *id; +} +EXPORT_SYMBOL_GPL(nfs4_init_deviceid_node); + +/* + * Uniquely initialize and insert a deviceid node into cache + * + * @new new deviceid node + * Note that the caller must set up new->nfs_client and new->deviceid + * + * @ret the inserted node, if none found, otherwise, the found entry. + */ +struct nfs4_deviceid_node * +nfs4_insert_deviceid_node(struct nfs4_deviceid_node *new) +{ + struct nfs4_deviceid_node *d; + long hash; + + spin_lock(&nfs4_deviceid_lock); + d = nfs4_find_get_deviceid(new->nfs_client, &new->deviceid); + if (d) { + spin_unlock(&nfs4_deviceid_lock); + return d; + } + + INIT_HLIST_NODE(&new->node); + atomic_set(&new->ref, 1); + hash = nfs4_deviceid_hash(&new->deviceid); + hlist_add_head_rcu(&new->node, &nfs4_deviceid_cache[hash]); + spin_unlock(&nfs4_deviceid_lock); + + return new; +} +EXPORT_SYMBOL_GPL(nfs4_insert_deviceid_node); + +/* + * Dereference a deviceid node and delete it when its reference count drops + * to zero. + * + * @d deviceid node to put + * + * @ret true iff the node was deleted + */ +bool +nfs4_put_deviceid_node(struct nfs4_deviceid_node *d) +{ + if (!atomic_dec_and_lock(&d->ref, &nfs4_deviceid_lock)) + return false; + hlist_del_init_rcu(&d->node); + spin_unlock(&nfs4_deviceid_lock); + synchronize_rcu(); + return true; +} +EXPORT_SYMBOL_GPL(nfs4_put_deviceid_node); -- cgit v1.2.3 From a43a9d93d40a69eceeb4e4a4c860cc20186d475c Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sun, 29 May 2011 12:40:50 +0200 Subject: [S390] mm: fix storage key handling page_get_storage_key() and page_set_storage_key() expect a page address and not its page frame number. This got inconsistent with 2d42552d "[S390] merge page_test_dirty and page_clear_dirty". Result is that we read/write storage keys from random pages and do not have a working dirty bit tracking at all. E.g. SetPageUpdate() doesn't clear the dirty bit of requested pages, which for example ext4 doesn't like very much and panics after a while. Unable to handle kernel paging request at virtual user address (null) Oops: 0004 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 1 Not tainted 2.6.39-07551-g139f37f-dirty #152 Process flush-94:0 (pid: 1576, task: 000000003eb34538, ksp: 000000003c287b70) Krnl PSW : 0704c00180000000 0000000000316b12 (jbd2_journal_file_inode+0x10e/0x138) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000000 0000000000000000 0700000000000000 0000000000316a62 000000003eb34cd0 0000000000000025 000000003c287b88 0000000000000001 000000003c287a70 000000003f1ec678 000000003f1ec000 0000000000000000 000000003e66ec00 0000000000316a62 000000003c287988 Krnl Code: 0000000000316b04: f0a0000407f4 srp 4(11,%r0),2036,0 0000000000316b0a: b9020022 ltgr %r2,%r2 0000000000316b0e: a7740015 brc 7,316b38 >0000000000316b12: e3d0c0000024 stg %r13,0(%r12) 0000000000316b18: 4120c010 la %r2,16(%r12) 0000000000316b1c: 4130d060 la %r3,96(%r13) 0000000000316b20: e340d0600004 lg %r4,96(%r13) 0000000000316b26: c0e50002b567 brasl %r14,36d5f4 Call Trace: ([<0000000000316a62>] jbd2_journal_file_inode+0x5e/0x138) [<00000000002da13c>] mpage_da_map_and_submit+0x2e8/0x42c [<00000000002daac2>] ext4_da_writepages+0x2da/0x504 [<00000000002597e8>] writeback_single_inode+0xf8/0x268 [<0000000000259f06>] writeback_sb_inodes+0xd2/0x18c [<000000000025a700>] writeback_inodes_wb+0x80/0x168 [<000000000025aa92>] wb_writeback+0x2aa/0x324 [<000000000025abde>] wb_do_writeback+0xd2/0x274 [<000000000025ae3a>] bdi_writeback_thread+0xba/0x1c4 [<00000000001737be>] kthread+0xa6/0xb0 [<000000000056c1da>] kernel_thread_starter+0x6/0xc [<000000000056c1d4>] kernel_thread_starter+0x0/0xc INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000000000316a8a>] jbd2_journal_file_inode+0x86/0x138 Reported-by: Sebastian Ott Signed-off-by: Heiko Carstens --- arch/s390/include/asm/pgtable.h | 16 ++++++++-------- include/linux/page-flags.h | 2 +- 2 files changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index c4773a2ef3d3..e4efacfe1b63 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -577,16 +577,16 @@ static inline void pgste_set_unlock(pte_t *ptep, pgste_t pgste) static inline pgste_t pgste_update_all(pte_t *ptep, pgste_t pgste) { #ifdef CONFIG_PGSTE - unsigned long pfn, bits; + unsigned long address, bits; unsigned char skey; - pfn = pte_val(*ptep) >> PAGE_SHIFT; - skey = page_get_storage_key(pfn); + address = pte_val(*ptep) & PAGE_MASK; + skey = page_get_storage_key(address); bits = skey & (_PAGE_CHANGED | _PAGE_REFERENCED); /* Clear page changed & referenced bit in the storage key */ if (bits) { skey ^= bits; - page_set_storage_key(pfn, skey, 1); + page_set_storage_key(address, skey, 1); } /* Transfer page changed & referenced bit to guest bits in pgste */ pgste_val(pgste) |= bits << 48; /* RCP_GR_BIT & RCP_GC_BIT */ @@ -628,16 +628,16 @@ static inline pgste_t pgste_update_young(pte_t *ptep, pgste_t pgste) static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste) { #ifdef CONFIG_PGSTE - unsigned long pfn; + unsigned long address; unsigned long okey, nkey; - pfn = pte_val(*ptep) >> PAGE_SHIFT; - okey = nkey = page_get_storage_key(pfn); + address = pte_val(*ptep) & PAGE_MASK; + okey = nkey = page_get_storage_key(address); nkey &= ~(_PAGE_ACC_BITS | _PAGE_FP_BIT); /* Set page access key and fetch protection bit from pgste */ nkey |= (pgste_val(pgste) & (RCP_ACC_BITS | RCP_FP_BIT)) >> 56; if (okey != nkey) - page_set_storage_key(pfn, nkey, 1); + page_set_storage_key(address, nkey, 1); #endif } diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 79a6700b7162..6081493db68f 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -308,7 +308,7 @@ static inline void SetPageUptodate(struct page *page) { #ifdef CONFIG_S390 if (!test_and_set_bit(PG_uptodate, &page->flags)) - page_set_storage_key(page_to_pfn(page), PAGE_DEFAULT_KEY, 0); + page_set_storage_key(page_to_phys(page), PAGE_DEFAULT_KEY, 0); #else /* * Memory barrier must be issued before setting the PG_uptodate bit, -- cgit v1.2.3 From 3c5cffb66d8ea94832650fcb55194715b0229088 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sun, 29 May 2011 12:40:51 +0200 Subject: [S390] mm: fix mmu_gather rework Quite a few functions that get called from the tlb gather code require that preemption must be disabled. So disable preemption inside of the called functions instead. The only drawback is that rcu_table_freelist_finish() doesn't get necessarily called on the cpu(s) that filled the free lists. So we may see a delay, until we finally see an rcu callback. However over time this shouldn't matter. So we get rid of lots of "BUG: using smp_processor_id() in preemptible" messages. Signed-off-by: Heiko Carstens --- arch/s390/mm/pgtable.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 14c6fae6fe6b..b09763fe5da1 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -71,12 +71,15 @@ static void rcu_table_freelist_callback(struct rcu_head *head) void rcu_table_freelist_finish(void) { - struct rcu_table_freelist *batch = __get_cpu_var(rcu_table_freelist); + struct rcu_table_freelist **batchp = &get_cpu_var(rcu_table_freelist); + struct rcu_table_freelist *batch = *batchp; if (!batch) - return; + goto out; call_rcu(&batch->rcu, rcu_table_freelist_callback); - __get_cpu_var(rcu_table_freelist) = NULL; + *batchp = NULL; +out: + put_cpu_var(rcu_table_freelist); } static void smp_sync(void *arg) @@ -141,20 +144,23 @@ void crst_table_free_rcu(struct mm_struct *mm, unsigned long *table) { struct rcu_table_freelist *batch; + preempt_disable(); if (atomic_read(&mm->mm_users) < 2 && cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) { crst_table_free(mm, table); - return; + goto out; } batch = rcu_table_freelist_get(mm); if (!batch) { smp_call_function(smp_sync, NULL, 1); crst_table_free(mm, table); - return; + goto out; } batch->table[--batch->crst_index] = table; if (batch->pgt_index >= batch->crst_index) rcu_table_freelist_finish(); +out: + preempt_enable(); } #ifdef CONFIG_64BIT @@ -323,16 +329,17 @@ void page_table_free_rcu(struct mm_struct *mm, unsigned long *table) struct page *page; unsigned long bits; + preempt_disable(); if (atomic_read(&mm->mm_users) < 2 && cpumask_equal(mm_cpumask(mm), cpumask_of(smp_processor_id()))) { page_table_free(mm, table); - return; + goto out; } batch = rcu_table_freelist_get(mm); if (!batch) { smp_call_function(smp_sync, NULL, 1); page_table_free(mm, table); - return; + goto out; } bits = (mm->context.has_pgste) ? 3UL : 1UL; bits <<= (__pa(table) & (PAGE_SIZE - 1)) / 256 / sizeof(unsigned long); @@ -345,6 +352,8 @@ void page_table_free_rcu(struct mm_struct *mm, unsigned long *table) batch->table[batch->pgt_index++] = table; if (batch->pgt_index >= batch->crst_index) rcu_table_freelist_finish(); +out: + preempt_enable(); } /* -- cgit v1.2.3 From 4c2593270133708698d4b8cea2dab469479ad13b Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Sun, 29 May 2011 12:52:55 +0100 Subject: dm table: allow targets to support discards internally Permit a target to support discards regardless of whether or not all its underlying devices do. Signed-off-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 6 +++++- include/linux/device-mapper.h | 6 ++++++ 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index cb8380c9767f..215e112d153e 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -1346,7 +1346,8 @@ bool dm_table_supports_discards(struct dm_table *t) return 0; /* - * Ensure that at least one underlying device supports discards. + * Unless any target used by the table set discards_supported, + * require at least one underlying device to support discards. * t->devices includes internal dm devices such as mirror logs * so we need to use iterate_devices here, which targets * supporting discard must provide. @@ -1354,6 +1355,9 @@ bool dm_table_supports_discards(struct dm_table *t) while (i < dm_table_get_num_targets(t)) { ti = dm_table_get_target(t, i++); + if (ti->discards_supported) + return 1; + if (ti->type->iterate_devices && ti->type->iterate_devices(ti, device_discard_capable, NULL)) return 1; diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 32a4423710f5..4427e0454051 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -191,6 +191,12 @@ struct dm_target { /* Used to provide an error string from the ctr */ char *error; + + /* + * Set if this target needs to receive discards regardless of + * whether or not its underlying devices have support. + */ + unsigned discards_supported:1; }; /* Each target can link one of these into the table */ -- cgit v1.2.3 From f4808ca99a203f20b4475601748e44b25a65bdec Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Sun, 29 May 2011 13:02:52 +0100 Subject: dm table: reject devices without request fns This patch adds a check that a block device has a request function defined before it is used. Otherwise, misconfiguration can cause an oops. Because we are allowing devices with zero size e.g. an offline multipath device as in commit 2cd54d9bedb79a97f014e86c0da393416b264eb3 ("dm: allow offline devices") there needs to be an additional check to ensure devices are initialised. Some block devices, like a loop device without a backing file, exist but have no request function. Reproducer is trivial: dm-mirror on unbound loop device (no backing file on loop devices) dmsetup create x --table "0 8 mirror core 2 8 sync 2 /dev/loop0 0 /dev/loop1 0" and mirror resync will immediatelly cause OOps. BUG: unable to handle kernel NULL pointer dereference at (null) ? generic_make_request+0x2bd/0x590 ? kmem_cache_alloc+0xad/0x190 submit_bio+0x53/0xe0 ? bio_add_page+0x3b/0x50 dispatch_io+0x1ca/0x210 [dm_mod] ? read_callback+0x0/0xd0 [dm_mirror] dm_io+0xbb/0x290 [dm_mod] do_mirror+0x1e0/0x748 [dm_mirror] Signed-off-by: Milan Broz Reported-by: Zdenek Kabelac Acked-by: Mike Snitzer Cc: stable@kernel.org Signed-off-by: Alasdair G Kergon --- drivers/md/dm-table.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c index 215e112d153e..451c3bb176d2 100644 --- a/drivers/md/dm-table.c +++ b/drivers/md/dm-table.c @@ -362,6 +362,7 @@ static void close_dev(struct dm_dev_internal *d, struct mapped_device *md) static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev, sector_t start, sector_t len, void *data) { + struct request_queue *q; struct queue_limits *limits = data; struct block_device *bdev = dev->bdev; sector_t dev_size = @@ -370,6 +371,22 @@ static int device_area_is_invalid(struct dm_target *ti, struct dm_dev *dev, limits->logical_block_size >> SECTOR_SHIFT; char b[BDEVNAME_SIZE]; + /* + * Some devices exist without request functions, + * such as loop devices not yet bound to backing files. + * Forbid the use of such devices. + */ + q = bdev_get_queue(bdev); + if (!q || !q->make_request_fn) { + DMWARN("%s: %s is not yet initialised: " + "start=%llu, len=%llu, dev_size=%llu", + dm_device_name(ti->table->md), bdevname(bdev, b), + (unsigned long long)start, + (unsigned long long)len, + (unsigned long long)dev_size); + return 1; + } + if (!dev_size) return 0; -- cgit v1.2.3 From 6f13f6fba76edc7d0e7580c5deee829d59a41b2f Mon Sep 17 00:00:00 2001 From: "Martin K. Petersen" Date: Sun, 29 May 2011 13:02:55 +0100 Subject: dm mpath: do not fail paths after integrity errors Integrity errors need to be passed to the owner of the integrity metadata for processing. Consequently EILSEQ should be passed up the stack. Cc: stable@kernel.org Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Signed-off-by: Alasdair G Kergon --- drivers/md/dm-mpath.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index a550a057d991..aa4e570c2cb5 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -1290,7 +1290,7 @@ static int do_end_io(struct multipath *m, struct request *clone, if (!error && !clone->errors) return 0; /* I/O complete */ - if (error == -EOPNOTSUPP || error == -EREMOTEIO) + if (error == -EOPNOTSUPP || error == -EREMOTEIO || error == -EILSEQ) return error; if (mpio->pgpath) -- cgit v1.2.3 From a705a34a565a5445bf731bd8006d51ea4d2b4236 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 29 May 2011 13:02:58 +0100 Subject: dm kcopyd: avoid pointless job splitting Don't split SUB_JOB_SIZE jobs If the job size equals SUB_JOB_SIZE, there is no point in splitting it. Splitting it just unnecessarily wastes time, because the split job size is SUB_JOB_SIZE too. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-kcopyd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 1bb73a13ca40..505b6f5cd385 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -578,7 +578,7 @@ int dm_kcopyd_copy(struct dm_kcopyd_client *kc, struct dm_io_region *from, job->fn = fn; job->context = context; - if (job->source.count < SUB_JOB_SIZE) + if (job->source.count <= SUB_JOB_SIZE) dispatch_job(job); else { -- cgit v1.2.3 From c6ea41fbbe08f270a8edef99dc369faf809d1bd6 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 29 May 2011 13:03:00 +0100 Subject: dm kcopyd: preallocate sub jobs to avoid deadlock There's a possible theoretical deadlock in dm-kcopyd because multiple allocations from the same mempool are required to finish a request. Avoid this by preallocating sub jobs. There is a mempool of 512 entries. Each request requires up to 9 entries from the mempool. If we have at least 57 concurrent requests running, the mempool may overflow and mempool allocations may start blocking until another entry is freed to the mempool. Because the same thread is used to free entries to the mempool and allocate entries from the mempool, this may result in a deadlock. This patch changes it so that one mempool entry contains all 9 "struct kcopyd_job" required to fulfill the whole request. The allocation is done only once in dm_kcopyd_copy and no further mempool allocations are done during request processing. If dm_kcopyd_copy is not run in the completion thread, this implementation is deadlock-free. MIN_JOBS needs reducing accordingly and we've chosen to reduce it further to 8. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-kcopyd.c | 49 +++++++++++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 20 deletions(-) diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 505b6f5cd385..24fb42ed7b8e 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -27,6 +27,10 @@ #include "dm.h" +#define SUB_JOB_SIZE 128 +#define SPLIT_COUNT 8 +#define MIN_JOBS 8 + /*----------------------------------------------------------------- * Each kcopyd client has its own little pool of preallocated * pages for kcopyd io. @@ -216,16 +220,17 @@ struct kcopyd_job { struct mutex lock; atomic_t sub_jobs; sector_t progress; -}; -/* FIXME: this should scale with the number of pages */ -#define MIN_JOBS 512 + struct kcopyd_job *master_job; +}; static struct kmem_cache *_job_cache; int __init dm_kcopyd_init(void) { - _job_cache = KMEM_CACHE(kcopyd_job, 0); + _job_cache = kmem_cache_create("kcopyd_job", + sizeof(struct kcopyd_job) * (SPLIT_COUNT + 1), + __alignof__(struct kcopyd_job), 0, NULL); if (!_job_cache) return -ENOMEM; @@ -299,7 +304,12 @@ static int run_complete_job(struct kcopyd_job *job) if (job->pages) kcopyd_put_pages(kc, job->pages); - mempool_free(job, kc->job_pool); + /* + * If this is the master job, the sub jobs have already + * completed so we can free everything. + */ + if (job->master_job == job) + mempool_free(job, kc->job_pool); fn(read_err, write_err, context); if (atomic_dec_and_test(&kc->nr_jobs)) @@ -460,14 +470,14 @@ static void dispatch_job(struct kcopyd_job *job) wake(kc); } -#define SUB_JOB_SIZE 128 static void segment_complete(int read_err, unsigned long write_err, void *context) { /* FIXME: tidy this function */ sector_t progress = 0; sector_t count = 0; - struct kcopyd_job *job = (struct kcopyd_job *) context; + struct kcopyd_job *sub_job = (struct kcopyd_job *) context; + struct kcopyd_job *job = sub_job->master_job; struct dm_kcopyd_client *kc = job->kc; mutex_lock(&job->lock); @@ -498,8 +508,6 @@ static void segment_complete(int read_err, unsigned long write_err, if (count) { int i; - struct kcopyd_job *sub_job = mempool_alloc(kc->job_pool, - GFP_NOIO); *sub_job = *job; sub_job->source.sector += progress; @@ -511,7 +519,7 @@ static void segment_complete(int read_err, unsigned long write_err, } sub_job->fn = segment_complete; - sub_job->context = job; + sub_job->context = sub_job; dispatch_job(sub_job); } else if (atomic_dec_and_test(&job->sub_jobs)) { @@ -531,19 +539,19 @@ static void segment_complete(int read_err, unsigned long write_err, } /* - * Create some little jobs that will do the move between - * them. + * Create some sub jobs to share the work between them. */ -#define SPLIT_COUNT 8 -static void split_job(struct kcopyd_job *job) +static void split_job(struct kcopyd_job *master_job) { int i; - atomic_inc(&job->kc->nr_jobs); + atomic_inc(&master_job->kc->nr_jobs); - atomic_set(&job->sub_jobs, SPLIT_COUNT); - for (i = 0; i < SPLIT_COUNT; i++) - segment_complete(0, 0u, job); + atomic_set(&master_job->sub_jobs, SPLIT_COUNT); + for (i = 0; i < SPLIT_COUNT; i++) { + master_job[i + 1].master_job = master_job; + segment_complete(0, 0u, &master_job[i + 1]); + } } int dm_kcopyd_copy(struct dm_kcopyd_client *kc, struct dm_io_region *from, @@ -553,7 +561,8 @@ int dm_kcopyd_copy(struct dm_kcopyd_client *kc, struct dm_io_region *from, struct kcopyd_job *job; /* - * Allocate a new job. + * Allocate an array of jobs consisting of one master job + * followed by SPLIT_COUNT sub jobs. */ job = mempool_alloc(kc->job_pool, GFP_NOIO); @@ -577,10 +586,10 @@ int dm_kcopyd_copy(struct dm_kcopyd_client *kc, struct dm_io_region *from, job->fn = fn; job->context = context; + job->master_job = job; if (job->source.count <= SUB_JOB_SIZE) dispatch_job(job); - else { mutex_init(&job->lock); job->progress = 0; -- cgit v1.2.3 From 4cc1b4cffd187a5c5d6264c8d766c49b3c57fb05 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 29 May 2011 13:03:02 +0100 Subject: dm kcopyd: remove superfluous page allocation spinlock Remove the spinlock protecting the pages allocation. The spinlock is only taken on initialization or from single-threaded workqueue. Therefore, the spinlock is useless. The spinlock is taken in kcopyd_get_pages and kcopyd_put_pages. kcopyd_get_pages is only called from run_pages_job, which is only called from process_jobs called from do_work. kcopyd_put_pages is called from client_alloc_pages (which is initialization function) or from run_complete_job. run_complete_job is only called from process_jobs called from do_work. Another spinlock, kc->job_lock is taken each time someone pushes or pops some work for the worker thread. Once we take kc->job_lock, we guarantee that any written memory is visible to the other CPUs. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-kcopyd.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 24fb42ed7b8e..ed9577916399 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -36,7 +36,6 @@ * pages for kcopyd io. *---------------------------------------------------------------*/ struct dm_kcopyd_client { - spinlock_t lock; struct page_list *pages; unsigned int nr_pages; unsigned int nr_free_pages; @@ -99,11 +98,8 @@ static int kcopyd_get_pages(struct dm_kcopyd_client *kc, { struct page_list *pl; - spin_lock(&kc->lock); - if (kc->nr_free_pages < nr) { - spin_unlock(&kc->lock); + if (kc->nr_free_pages < nr) return -ENOMEM; - } kc->nr_free_pages -= nr; for (*pages = pl = kc->pages; --nr; pl = pl->next) @@ -112,8 +108,6 @@ static int kcopyd_get_pages(struct dm_kcopyd_client *kc, kc->pages = pl->next; pl->next = NULL; - spin_unlock(&kc->lock); - return 0; } @@ -121,14 +115,12 @@ static void kcopyd_put_pages(struct dm_kcopyd_client *kc, struct page_list *pl) { struct page_list *cursor; - spin_lock(&kc->lock); for (cursor = pl; cursor->next; cursor = cursor->next) kc->nr_free_pages++; kc->nr_free_pages++; cursor->next = kc->pages; kc->pages = pl; - spin_unlock(&kc->lock); } /* @@ -625,7 +617,6 @@ int dm_kcopyd_client_create(unsigned int nr_pages, if (!kc) return -ENOMEM; - spin_lock_init(&kc->lock); spin_lock_init(&kc->job_lock); INIT_LIST_HEAD(&kc->complete_jobs); INIT_LIST_HEAD(&kc->io_jobs); -- cgit v1.2.3 From f99b55eec795bd0fd577ab3ca06f3acfbe3b1ab1 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 29 May 2011 13:03:04 +0100 Subject: dm kcopyd: add gfp parm to alloc_pl Introduce a parameter for gfp flags to alloc_pl() for use in following patches. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-kcopyd.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index ed9577916399..0270844c2a3d 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -70,15 +70,15 @@ static void wake(struct dm_kcopyd_client *kc) queue_work(kc->kcopyd_wq, &kc->kcopyd_work); } -static struct page_list *alloc_pl(void) +static struct page_list *alloc_pl(gfp_t gfp) { struct page_list *pl; - pl = kmalloc(sizeof(*pl), GFP_KERNEL); + pl = kmalloc(sizeof(*pl), gfp); if (!pl) return NULL; - pl->page = alloc_page(GFP_KERNEL); + pl->page = alloc_page(gfp); if (!pl->page) { kfree(pl); return NULL; @@ -143,7 +143,7 @@ static int client_alloc_pages(struct dm_kcopyd_client *kc, unsigned int nr) struct page_list *pl = NULL, *next; for (i = 0; i < nr; i++) { - next = alloc_pl(); + next = alloc_pl(GFP_KERNEL); if (!next) { if (pl) drop_pages(pl); -- cgit v1.2.3 From d04714580f12379fcf7a0f799e86c92b96dd4e1f Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 29 May 2011 13:03:07 +0100 Subject: dm kcopyd: alloc pages from the main page allocator This patch changes dm-kcopyd so that it allocates pages from the main page allocator with __GFP_NOWARN | __GFP_NORETRY flags (so that it can fail in case of memory pressure). If the allocation fails, dm-kcopyd allocates pages from its own reserve. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-kcopyd.c | 91 +++++++++++++++++++++++++++++++++----------------- 1 file changed, 60 insertions(+), 31 deletions(-) diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 0270844c2a3d..5dfbdcb40a47 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -37,8 +37,8 @@ *---------------------------------------------------------------*/ struct dm_kcopyd_client { struct page_list *pages; - unsigned int nr_pages; - unsigned int nr_free_pages; + unsigned nr_reserved_pages; + unsigned nr_free_pages; struct dm_io_client *io_client; @@ -70,6 +70,9 @@ static void wake(struct dm_kcopyd_client *kc) queue_work(kc->kcopyd_wq, &kc->kcopyd_work); } +/* + * Obtain one page for the use of kcopyd. + */ static struct page_list *alloc_pl(gfp_t gfp) { struct page_list *pl; @@ -93,34 +96,56 @@ static void free_pl(struct page_list *pl) kfree(pl); } -static int kcopyd_get_pages(struct dm_kcopyd_client *kc, - unsigned int nr, struct page_list **pages) +/* + * Add the provided pages to a client's free page list, releasing + * back to the system any beyond the reserved_pages limit. + */ +static void kcopyd_put_pages(struct dm_kcopyd_client *kc, struct page_list *pl) { - struct page_list *pl; - - if (kc->nr_free_pages < nr) - return -ENOMEM; + struct page_list *next; - kc->nr_free_pages -= nr; - for (*pages = pl = kc->pages; --nr; pl = pl->next) - ; + do { + next = pl->next; - kc->pages = pl->next; - pl->next = NULL; + if (kc->nr_free_pages >= kc->nr_reserved_pages) + free_pl(pl); + else { + pl->next = kc->pages; + kc->pages = pl; + kc->nr_free_pages++; + } - return 0; + pl = next; + } while (pl); } -static void kcopyd_put_pages(struct dm_kcopyd_client *kc, struct page_list *pl) +static int kcopyd_get_pages(struct dm_kcopyd_client *kc, + unsigned int nr, struct page_list **pages) { - struct page_list *cursor; + struct page_list *pl; - for (cursor = pl; cursor->next; cursor = cursor->next) - kc->nr_free_pages++; + *pages = NULL; + + do { + pl = alloc_pl(__GFP_NOWARN | __GFP_NORETRY); + if (unlikely(!pl)) { + /* Use reserved pages */ + pl = kc->pages; + if (unlikely(!pl)) + goto out_of_memory; + kc->pages = pl->next; + kc->nr_free_pages--; + } + pl->next = *pages; + *pages = pl; + } while (--nr); + + return 0; - kc->nr_free_pages++; - cursor->next = kc->pages; - kc->pages = pl; +out_of_memory: + if (*pages) + kcopyd_put_pages(kc, *pages); + return -ENOMEM; } /* @@ -137,12 +162,15 @@ static void drop_pages(struct page_list *pl) } } -static int client_alloc_pages(struct dm_kcopyd_client *kc, unsigned int nr) +/* + * Allocate and reserve nr_pages for the use of a specific client. + */ +static int client_reserve_pages(struct dm_kcopyd_client *kc, unsigned nr_pages) { - unsigned int i; + unsigned i; struct page_list *pl = NULL, *next; - for (i = 0; i < nr; i++) { + for (i = 0; i < nr_pages; i++) { next = alloc_pl(GFP_KERNEL); if (!next) { if (pl) @@ -153,17 +181,18 @@ static int client_alloc_pages(struct dm_kcopyd_client *kc, unsigned int nr) pl = next; } + kc->nr_reserved_pages += nr_pages; kcopyd_put_pages(kc, pl); - kc->nr_pages += nr; + return 0; } static void client_free_pages(struct dm_kcopyd_client *kc) { - BUG_ON(kc->nr_free_pages != kc->nr_pages); + BUG_ON(kc->nr_free_pages != kc->nr_reserved_pages); drop_pages(kc->pages); kc->pages = NULL; - kc->nr_free_pages = kc->nr_pages = 0; + kc->nr_free_pages = kc->nr_reserved_pages = 0; } /*----------------------------------------------------------------- @@ -607,7 +636,7 @@ int kcopyd_cancel(struct kcopyd_job *job, int block) /*----------------------------------------------------------------- * Client setup *---------------------------------------------------------------*/ -int dm_kcopyd_client_create(unsigned int nr_pages, +int dm_kcopyd_client_create(unsigned min_pages, struct dm_kcopyd_client **result) { int r = -ENOMEM; @@ -633,12 +662,12 @@ int dm_kcopyd_client_create(unsigned int nr_pages, goto bad_workqueue; kc->pages = NULL; - kc->nr_pages = kc->nr_free_pages = 0; - r = client_alloc_pages(kc, nr_pages); + kc->nr_reserved_pages = kc->nr_free_pages = 0; + r = client_reserve_pages(kc, min_pages); if (r) goto bad_client_pages; - kc->io_client = dm_io_client_create(nr_pages); + kc->io_client = dm_io_client_create(min_pages); if (IS_ERR(kc->io_client)) { r = PTR_ERR(kc->io_client); goto bad_io_client; -- cgit v1.2.3 From bda8efec5c706a672e0714d341a342e811f0262a Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 29 May 2011 13:03:09 +0100 Subject: dm io: use fixed initial mempool size Replace the arbitrary calculation of an initial io struct mempool size with a constant. The code calculated the number of reserved structures based on the request size and used a "magic" multiplication constant of 4. This patch changes it to reserve a fixed number - itself still chosen quite arbitrarily. Further testing might show if there is a better number to choose. Note that if there is no memory pressure, we can still allocate an arbitrary number of "struct io" structures. One structure is enough to process the whole request. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-io.c | 27 +++++---------------------- drivers/md/dm-kcopyd.c | 2 +- drivers/md/dm-log.c | 3 +-- drivers/md/dm-raid1.c | 3 +-- drivers/md/dm-snap-persistent.c | 13 +------------ include/linux/dm-io.h | 3 +-- 6 files changed, 10 insertions(+), 41 deletions(-) diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index 76a5af00a26b..2067288f61f9 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -19,6 +19,8 @@ #define DM_MSG_PREFIX "io" #define DM_IO_MAX_REGIONS BITS_PER_LONG +#define MIN_IOS 16 +#define MIN_BIOS 16 struct dm_io_client { mempool_t *pool; @@ -40,34 +42,22 @@ struct io { static struct kmem_cache *_dm_io_cache; -/* - * io contexts are only dynamically allocated for asynchronous - * io. Since async io is likely to be the majority of io we'll - * have the same number of io contexts as bios! (FIXME: must reduce this). - */ - -static unsigned int pages_to_ios(unsigned int pages) -{ - return 4 * pages; /* too many ? */ -} - /* * Create a client with mempool and bioset. */ -struct dm_io_client *dm_io_client_create(unsigned num_pages) +struct dm_io_client *dm_io_client_create(void) { - unsigned ios = pages_to_ios(num_pages); struct dm_io_client *client; client = kmalloc(sizeof(*client), GFP_KERNEL); if (!client) return ERR_PTR(-ENOMEM); - client->pool = mempool_create_slab_pool(ios, _dm_io_cache); + client->pool = mempool_create_slab_pool(MIN_IOS, _dm_io_cache); if (!client->pool) goto bad; - client->bios = bioset_create(16, 0); + client->bios = bioset_create(MIN_BIOS, 0); if (!client->bios) goto bad; @@ -81,13 +71,6 @@ struct dm_io_client *dm_io_client_create(unsigned num_pages) } EXPORT_SYMBOL(dm_io_client_create); -int dm_io_client_resize(unsigned num_pages, struct dm_io_client *client) -{ - return mempool_resize(client->pool, pages_to_ios(num_pages), - GFP_KERNEL); -} -EXPORT_SYMBOL(dm_io_client_resize); - void dm_io_client_destroy(struct dm_io_client *client) { mempool_destroy(client->pool); diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 5dfbdcb40a47..719693340d1d 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -667,7 +667,7 @@ int dm_kcopyd_client_create(unsigned min_pages, if (r) goto bad_client_pages; - kc->io_client = dm_io_client_create(min_pages); + kc->io_client = dm_io_client_create(); if (IS_ERR(kc->io_client)) { r = PTR_ERR(kc->io_client); goto bad_io_client; diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index a1f321889676..948e3f4925bf 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -449,8 +449,7 @@ static int create_log_context(struct dm_dirty_log *log, struct dm_target *ti, lc->io_req.mem.type = DM_IO_VMA; lc->io_req.notify.fn = NULL; - lc->io_req.client = dm_io_client_create(dm_div_up(buf_size, - PAGE_SIZE)); + lc->io_req.client = dm_io_client_create(); if (IS_ERR(lc->io_req.client)) { r = PTR_ERR(lc->io_req.client); DMWARN("couldn't allocate disk io client"); diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 976ad4688afc..53089aa11387 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -22,7 +22,6 @@ #define DM_MSG_PREFIX "raid1" #define MAX_RECOVERY 1 /* Maximum number of regions recovered in parallel. */ -#define DM_IO_PAGES 64 #define DM_KCOPYD_PAGES 64 #define DM_RAID1_HANDLE_ERRORS 0x01 @@ -887,7 +886,7 @@ static struct mirror_set *alloc_context(unsigned int nr_mirrors, return NULL; } - ms->io_client = dm_io_client_create(DM_IO_PAGES); + ms->io_client = dm_io_client_create(); if (IS_ERR(ms->io_client)) { ti->error = "Error creating dm_io client"; mempool_destroy(ms->read_record_pool); diff --git a/drivers/md/dm-snap-persistent.c b/drivers/md/dm-snap-persistent.c index 95891dfcbca0..135c2f1fdbfc 100644 --- a/drivers/md/dm-snap-persistent.c +++ b/drivers/md/dm-snap-persistent.c @@ -154,11 +154,6 @@ struct pstore { struct workqueue_struct *metadata_wq; }; -static unsigned sectors_to_pages(unsigned sectors) -{ - return DIV_ROUND_UP(sectors, PAGE_SIZE >> 9); -} - static int alloc_area(struct pstore *ps) { int r = -ENOMEM; @@ -318,8 +313,7 @@ static int read_header(struct pstore *ps, int *new_snapshot) chunk_size_supplied = 0; } - ps->io_client = dm_io_client_create(sectors_to_pages(ps->store-> - chunk_size)); + ps->io_client = dm_io_client_create(); if (IS_ERR(ps->io_client)) return PTR_ERR(ps->io_client); @@ -368,11 +362,6 @@ static int read_header(struct pstore *ps, int *new_snapshot) return r; } - r = dm_io_client_resize(sectors_to_pages(ps->store->chunk_size), - ps->io_client); - if (r) - return r; - r = alloc_area(ps); return r; diff --git a/include/linux/dm-io.h b/include/linux/dm-io.h index 5c9186b93fff..f4b0aa3126f5 100644 --- a/include/linux/dm-io.h +++ b/include/linux/dm-io.h @@ -69,8 +69,7 @@ struct dm_io_request { * * Create/destroy may block. */ -struct dm_io_client *dm_io_client_create(unsigned num_pages); -int dm_io_client_resize(unsigned num_pages, struct dm_io_client *client); +struct dm_io_client *dm_io_client_create(void); void dm_io_client_destroy(struct dm_io_client *client); /* -- cgit v1.2.3 From 5f43ba2950414dc0abf4ac44c397d88069056746 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 29 May 2011 13:03:11 +0100 Subject: dm kcopyd: reserve fewer pages Reserve just the minimum of pages needed to process one job. Because we allocate pages from page allocator, we don't need to reserve a large number of pages. The maximum job size is SUB_JOB_SIZE and we calculate the number of reserved pages based on this. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-kcopyd.c | 6 +++--- drivers/md/dm-raid1.c | 3 +-- drivers/md/dm-snap.c | 7 +------ include/linux/dm-kcopyd.h | 3 +-- 4 files changed, 6 insertions(+), 13 deletions(-) diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 719693340d1d..579647f8b4d2 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -30,6 +30,7 @@ #define SUB_JOB_SIZE 128 #define SPLIT_COUNT 8 #define MIN_JOBS 8 +#define RESERVE_PAGES (DIV_ROUND_UP(SUB_JOB_SIZE << SECTOR_SHIFT, PAGE_SIZE)) /*----------------------------------------------------------------- * Each kcopyd client has its own little pool of preallocated @@ -636,8 +637,7 @@ int kcopyd_cancel(struct kcopyd_job *job, int block) /*----------------------------------------------------------------- * Client setup *---------------------------------------------------------------*/ -int dm_kcopyd_client_create(unsigned min_pages, - struct dm_kcopyd_client **result) +int dm_kcopyd_client_create(struct dm_kcopyd_client **result) { int r = -ENOMEM; struct dm_kcopyd_client *kc; @@ -663,7 +663,7 @@ int dm_kcopyd_client_create(unsigned min_pages, kc->pages = NULL; kc->nr_reserved_pages = kc->nr_free_pages = 0; - r = client_reserve_pages(kc, min_pages); + r = client_reserve_pages(kc, RESERVE_PAGES); if (r) goto bad_client_pages; diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 53089aa11387..9defad045418 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -22,7 +22,6 @@ #define DM_MSG_PREFIX "raid1" #define MAX_RECOVERY 1 /* Maximum number of regions recovered in parallel. */ -#define DM_KCOPYD_PAGES 64 #define DM_RAID1_HANDLE_ERRORS 0x01 #define errors_handled(p) ((p)->features & DM_RAID1_HANDLE_ERRORS) @@ -1116,7 +1115,7 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto err_destroy_wq; } - r = dm_kcopyd_client_create(DM_KCOPYD_PAGES, &ms->kcopyd_client); + r = dm_kcopyd_client_create(&ms->kcopyd_client); if (r) goto err_destroy_wq; diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index a2d330942cb2..5a2296de84a3 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -39,11 +39,6 @@ static const char dm_snapshot_merge_target_name[] = "snapshot-merge"; */ #define SNAPSHOT_COPY_PRIORITY 2 -/* - * Reserve 1MB for each snapshot initially (with minimum of 1 page). - */ -#define SNAPSHOT_PAGES (((1UL << 20) >> PAGE_SHIFT) ? : 1) - /* * The size of the mempool used to track chunks in use. */ @@ -1116,7 +1111,7 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad_hash_tables; } - r = dm_kcopyd_client_create(SNAPSHOT_PAGES, &s->kcopyd_client); + r = dm_kcopyd_client_create(&s->kcopyd_client); if (r) { ti->error = "Could not create kcopyd client"; goto bad_kcopyd; diff --git a/include/linux/dm-kcopyd.h b/include/linux/dm-kcopyd.h index 5db216311695..312513d4741a 100644 --- a/include/linux/dm-kcopyd.h +++ b/include/linux/dm-kcopyd.h @@ -25,8 +25,7 @@ * To use kcopyd you must first create a dm_kcopyd_client object. */ struct dm_kcopyd_client; -int dm_kcopyd_client_create(unsigned num_pages, - struct dm_kcopyd_client **result); +int dm_kcopyd_client_create(struct dm_kcopyd_client **result); void dm_kcopyd_client_destroy(struct dm_kcopyd_client *kc); /* -- cgit v1.2.3 From fa34ce73072f90ecd90dcc43f29d82e70e5f8676 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Sun, 29 May 2011 13:03:13 +0100 Subject: dm kcopyd: return client directly and not through a pointer Return client directly from dm_kcopyd_client_create, not through a parameter, making it consistent with dm_io_client_create. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- drivers/md/dm-kcopyd.c | 9 ++++----- drivers/md/dm-raid1.c | 6 ++++-- drivers/md/dm-snap.c | 5 +++-- include/linux/dm-kcopyd.h | 2 +- 4 files changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 579647f8b4d2..819e37eaaeba 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -637,14 +637,14 @@ int kcopyd_cancel(struct kcopyd_job *job, int block) /*----------------------------------------------------------------- * Client setup *---------------------------------------------------------------*/ -int dm_kcopyd_client_create(struct dm_kcopyd_client **result) +struct dm_kcopyd_client *dm_kcopyd_client_create(void) { int r = -ENOMEM; struct dm_kcopyd_client *kc; kc = kmalloc(sizeof(*kc), GFP_KERNEL); if (!kc) - return -ENOMEM; + return ERR_PTR(-ENOMEM); spin_lock_init(&kc->job_lock); INIT_LIST_HEAD(&kc->complete_jobs); @@ -676,8 +676,7 @@ int dm_kcopyd_client_create(struct dm_kcopyd_client **result) init_waitqueue_head(&kc->destroyq); atomic_set(&kc->nr_jobs, 0); - *result = kc; - return 0; + return kc; bad_io_client: client_free_pages(kc); @@ -688,7 +687,7 @@ bad_workqueue: bad_slab: kfree(kc); - return r; + return ERR_PTR(r); } EXPORT_SYMBOL(dm_kcopyd_client_create); diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 9defad045418..9bfd057be686 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1115,9 +1115,11 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto err_destroy_wq; } - r = dm_kcopyd_client_create(&ms->kcopyd_client); - if (r) + ms->kcopyd_client = dm_kcopyd_client_create(); + if (IS_ERR(ms->kcopyd_client)) { + r = PTR_ERR(ms->kcopyd_client); goto err_destroy_wq; + } wakeup_mirrord(ms); return 0; diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 5a2296de84a3..9ecff5f3023a 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -1111,8 +1111,9 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad_hash_tables; } - r = dm_kcopyd_client_create(&s->kcopyd_client); - if (r) { + s->kcopyd_client = dm_kcopyd_client_create(); + if (IS_ERR(s->kcopyd_client)) { + r = PTR_ERR(s->kcopyd_client); ti->error = "Could not create kcopyd client"; goto bad_kcopyd; } diff --git a/include/linux/dm-kcopyd.h b/include/linux/dm-kcopyd.h index 312513d4741a..298d587e349b 100644 --- a/include/linux/dm-kcopyd.h +++ b/include/linux/dm-kcopyd.h @@ -25,7 +25,7 @@ * To use kcopyd you must first create a dm_kcopyd_client object. */ struct dm_kcopyd_client; -int dm_kcopyd_client_create(struct dm_kcopyd_client **result); +struct dm_kcopyd_client *dm_kcopyd_client_create(void); void dm_kcopyd_client_destroy(struct dm_kcopyd_client *kc); /* -- cgit v1.2.3 From bc658c96037fc87463f0703ad2ea7c895344cb7e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Sun, 29 May 2011 10:33:44 +0200 Subject: mm, rmap: Add yet more comments to page_get_anon_vma/page_lock_anon_vma Inspired by an analysis from Hugh on why again all this doesn't explode in our face. Signed-off-by: Peter Zijlstra Signed-off-by: Linus Torvalds --- mm/rmap.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/mm/rmap.c b/mm/rmap.c index 6bada99cd61c..0eb463ea88dd 100644 --- a/mm/rmap.c +++ b/mm/rmap.c @@ -352,6 +352,11 @@ void __init anon_vma_init(void) * The page might have been remapped to a different anon_vma or the anon_vma * returned may already be freed (and even reused). * + * In case it was remapped to a different anon_vma, the new anon_vma will be a + * child of the old anon_vma, and the anon_vma lifetime rules will therefore + * ensure that any anon_vma obtained from the page will still be valid for as + * long as we observe page_mapped() [ hence all those page_mapped() tests ]. + * * All users of this function must be very careful when walking the anon_vma * chain and verify that the page in question is indeed mapped in it * [ something equivalent to page_mapped_in_vma() ]. @@ -421,7 +426,7 @@ struct anon_vma *page_lock_anon_vma(struct page *page) /* * If the page is still mapped, then this anon_vma is still * its anon_vma, and holding the mutex ensures that it will - * not go away, see __put_anon_vma(). + * not go away, see anon_vma_free(). */ if (!page_mapped(page)) { mutex_unlock(&root_anon_vma->mutex); -- cgit v1.2.3 From c4f790736ca8d7d86883c5aee2ba1caa15cd8da3 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 23 May 2011 21:18:20 -0500 Subject: eCryptfs: Consolidate inode functions into inode.c These functions should live in inode.c since their focus is on inodes and they're primarily used by functions in inode.c. Also does a simple cleanup of ecryptfs_inode_test() and rolls ecryptfs_init_inode() into ecryptfs_inode_set(). Signed-off-by: Tyler Hicks Tested-by: David --- fs/ecryptfs/ecryptfs_kernel.h | 9 +--- fs/ecryptfs/inode.c | 104 ++++++++++++++++++++++++++++++++++++------ fs/ecryptfs/main.c | 69 ---------------------------- fs/ecryptfs/super.c | 16 ------- 4 files changed, 91 insertions(+), 107 deletions(-) diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index e70282775e2c..37224b5fb12a 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -625,10 +625,8 @@ struct ecryptfs_open_req { struct list_head kthread_ctl_list; }; -#define ECRYPTFS_INTERPOSE_FLAG_D_ADD 0x00000001 -int ecryptfs_interpose(struct dentry *hidden_dentry, - struct dentry *this_dentry, struct super_block *sb, - u32 flags); +struct inode *ecryptfs_get_inode(struct inode *lower_inode, + struct super_block *sb); void ecryptfs_i_size_init(const char *page_virt, struct inode *inode); int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry, struct dentry *lower_dentry, @@ -679,9 +677,6 @@ int ecryptfs_parse_packet_set(struct ecryptfs_crypt_stat *crypt_stat, unsigned char *src, struct dentry *ecryptfs_dentry); int ecryptfs_truncate(struct dentry *dentry, loff_t new_length); -int ecryptfs_inode_test(struct inode *inode, void *candidate_lower_inode); -int ecryptfs_inode_set(struct inode *inode, void *lower_inode); -void ecryptfs_init_inode(struct inode *inode, struct inode *lower_inode); ssize_t ecryptfs_getxattr_lower(struct dentry *lower_dentry, const char *name, void *value, size_t size); diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 94ab3c06317a..704a8c8fe19a 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -51,6 +51,95 @@ static void unlock_dir(struct dentry *dir) dput(dir); } +static int ecryptfs_inode_test(struct inode *inode, void *lower_inode) +{ + if (ecryptfs_inode_to_lower(inode) == (struct inode *)lower_inode) + return 1; + return 0; +} + +static int ecryptfs_inode_set(struct inode *inode, void *lower_inode) +{ + ecryptfs_set_inode_lower(inode, (struct inode *)lower_inode); + inode->i_ino = ((struct inode *)lower_inode)->i_ino; + inode->i_version++; + inode->i_op = &ecryptfs_main_iops; + inode->i_fop = &ecryptfs_main_fops; + inode->i_mapping->a_ops = &ecryptfs_aops; + return 0; +} + +struct inode *ecryptfs_get_inode(struct inode *lower_inode, + struct super_block *sb) +{ + struct inode *inode; + int rc = 0; + + if (lower_inode->i_sb != ecryptfs_superblock_to_lower(sb)) { + rc = -EXDEV; + goto out; + } + if (!igrab(lower_inode)) { + rc = -ESTALE; + goto out; + } + inode = iget5_locked(sb, (unsigned long)lower_inode, + ecryptfs_inode_test, ecryptfs_inode_set, + lower_inode); + if (!inode) { + rc = -EACCES; + iput(lower_inode); + goto out; + } + if (inode->i_state & I_NEW) + unlock_new_inode(inode); + else + iput(lower_inode); + if (S_ISLNK(lower_inode->i_mode)) + inode->i_op = &ecryptfs_symlink_iops; + else if (S_ISDIR(lower_inode->i_mode)) + inode->i_op = &ecryptfs_dir_iops; + if (S_ISDIR(lower_inode->i_mode)) + inode->i_fop = &ecryptfs_dir_fops; + if (special_file(lower_inode->i_mode)) + init_special_inode(inode, lower_inode->i_mode, + lower_inode->i_rdev); + fsstack_copy_attr_all(inode, lower_inode); + /* This size will be overwritten for real files w/ headers and + * other metadata */ + fsstack_copy_inode_size(inode, lower_inode); + return inode; +out: + return ERR_PTR(rc); +} + +#define ECRYPTFS_INTERPOSE_FLAG_D_ADD 0x00000001 +/** + * ecryptfs_interpose + * @lower_dentry: Existing dentry in the lower filesystem + * @dentry: ecryptfs' dentry + * @sb: ecryptfs's super_block + * @flags: flags to govern behavior of interpose procedure + * + * Interposes upper and lower dentries. + * + * Returns zero on success; non-zero otherwise + */ +static int ecryptfs_interpose(struct dentry *lower_dentry, + struct dentry *dentry, struct super_block *sb, + u32 flags) +{ + struct inode *lower_inode = lower_dentry->d_inode; + struct inode *inode = ecryptfs_get_inode(lower_inode, sb); + if (IS_ERR(inode)) + return PTR_ERR(inode); + if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD) + d_add(dentry, inode); + else + d_instantiate(dentry, inode); + return 0; +} + /** * ecryptfs_create_underlying_file * @lower_dir_inode: inode of the parent in the lower fs of the new file @@ -1079,21 +1168,6 @@ out: return rc; } -int ecryptfs_inode_test(struct inode *inode, void *candidate_lower_inode) -{ - if ((ecryptfs_inode_to_lower(inode) - == (struct inode *)candidate_lower_inode)) - return 1; - else - return 0; -} - -int ecryptfs_inode_set(struct inode *inode, void *lower_inode) -{ - ecryptfs_init_inode(inode, (struct inode *)lower_inode); - return 0; -} - const struct inode_operations ecryptfs_symlink_iops = { .readlink = ecryptfs_readlink, .follow_link = ecryptfs_follow_link, diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 89b93389af8e..7c697abab396 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -168,75 +168,6 @@ void ecryptfs_put_lower_file(struct inode *inode) } } -static struct inode *ecryptfs_get_inode(struct inode *lower_inode, - struct super_block *sb) -{ - struct inode *inode; - int rc = 0; - - if (lower_inode->i_sb != ecryptfs_superblock_to_lower(sb)) { - rc = -EXDEV; - goto out; - } - if (!igrab(lower_inode)) { - rc = -ESTALE; - goto out; - } - inode = iget5_locked(sb, (unsigned long)lower_inode, - ecryptfs_inode_test, ecryptfs_inode_set, - lower_inode); - if (!inode) { - rc = -EACCES; - iput(lower_inode); - goto out; - } - if (inode->i_state & I_NEW) - unlock_new_inode(inode); - else - iput(lower_inode); - if (S_ISLNK(lower_inode->i_mode)) - inode->i_op = &ecryptfs_symlink_iops; - else if (S_ISDIR(lower_inode->i_mode)) - inode->i_op = &ecryptfs_dir_iops; - if (S_ISDIR(lower_inode->i_mode)) - inode->i_fop = &ecryptfs_dir_fops; - if (special_file(lower_inode->i_mode)) - init_special_inode(inode, lower_inode->i_mode, - lower_inode->i_rdev); - fsstack_copy_attr_all(inode, lower_inode); - /* This size will be overwritten for real files w/ headers and - * other metadata */ - fsstack_copy_inode_size(inode, lower_inode); - return inode; -out: - return ERR_PTR(rc); -} - -/** - * ecryptfs_interpose - * @lower_dentry: Existing dentry in the lower filesystem - * @dentry: ecryptfs' dentry - * @sb: ecryptfs's super_block - * @flags: flags to govern behavior of interpose procedure - * - * Interposes upper and lower dentries. - * - * Returns zero on success; non-zero otherwise - */ -int ecryptfs_interpose(struct dentry *lower_dentry, struct dentry *dentry, - struct super_block *sb, u32 flags) -{ - struct inode *lower_inode = lower_dentry->d_inode; - struct inode *inode = ecryptfs_get_inode(lower_inode, sb); - if (IS_ERR(inode)) - return PTR_ERR(inode); - if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD) - d_add(dentry, inode); - else - d_instantiate(dentry, inode); - return 0; -} - enum { ecryptfs_opt_sig, ecryptfs_opt_ecryptfs_sig, ecryptfs_opt_cipher, ecryptfs_opt_ecryptfs_cipher, ecryptfs_opt_ecryptfs_key_bytes, diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c index 245b517bf1b6..dbd52d40df4c 100644 --- a/fs/ecryptfs/super.c +++ b/fs/ecryptfs/super.c @@ -92,22 +92,6 @@ static void ecryptfs_destroy_inode(struct inode *inode) call_rcu(&inode->i_rcu, ecryptfs_i_callback); } -/** - * ecryptfs_init_inode - * @inode: The ecryptfs inode - * - * Set up the ecryptfs inode. - */ -void ecryptfs_init_inode(struct inode *inode, struct inode *lower_inode) -{ - ecryptfs_set_inode_lower(inode, lower_inode); - inode->i_ino = lower_inode->i_ino; - inode->i_version++; - inode->i_op = &ecryptfs_main_iops; - inode->i_fop = &ecryptfs_main_fops; - inode->i_mapping->a_ops = &ecryptfs_aops; -} - /** * ecryptfs_statfs * @sb: The ecryptfs super block -- cgit v1.2.3 From 1775bc342c6eacd6304493cbb2e0cda1a0182246 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Fri, 20 May 2011 13:47:33 +0200 Subject: NFSv4.1: purge deviceid cache on nfs_free_client Use the pnfs_layoutdriver_type both as a qualifier for the deviceid, distinguishing deviceid from different layout types on the server, and for freeing the layout-driver allocated structure containing the nfs4_deviceid_node. [BUG in _deviceid_purge_client] [layout_driver MUST set free_deviceid_node if using dev-cache] [let ver < 4.1 compile] Signed-off-by: Boaz Harrosh [removed EXPORT_SYMBOL_GPL(nfs4_deviceid_purge_client)] Signed-off-by: Benny Halevy --- fs/nfs/client.c | 2 ++ fs/nfs/nfs4filelayout.c | 7 +++++++ fs/nfs/nfs4filelayout.h | 1 + fs/nfs/nfs4filelayoutdev.c | 9 +++++---- fs/nfs/pnfs.h | 11 +++++++++++ fs/nfs/pnfs_dev.c | 47 +++++++++++++++++++++++++++++++++++++++++++--- 6 files changed, 70 insertions(+), 7 deletions(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 139be9647d80..b3dc2b88b65b 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -290,6 +290,8 @@ static void nfs_free_client(struct nfs_client *clp) if (clp->cl_machine_cred != NULL) put_rpccred(clp->cl_machine_cred); + nfs4_deviceid_purge_client(clp); + kfree(clp->cl_hostname); kfree(clp); diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 4c67a6f6519d..cd289d9b7de7 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -862,6 +862,12 @@ filelayout_commit_pagelist(struct inode *inode, struct list_head *mds_pages, return -ENOMEM; } +static void +filelayout_free_deveiceid_node(struct nfs4_deviceid_node *d) +{ + nfs4_fl_free_deviceid(container_of(d, struct nfs4_file_layout_dsaddr, id_node)); +} + static struct pnfs_layoutdriver_type filelayout_type = { .id = LAYOUT_NFSV4_1_FILES, .name = "LAYOUT_NFSV4_1_FILES", @@ -874,6 +880,7 @@ static struct pnfs_layoutdriver_type filelayout_type = { .commit_pagelist = filelayout_commit_pagelist, .read_pagelist = filelayout_read_pagelist, .write_pagelist = filelayout_write_pagelist, + .free_deviceid_node = filelayout_free_deveiceid_node, }; static int __init nfs4filelayout_init(void) diff --git a/fs/nfs/nfs4filelayout.h b/fs/nfs/nfs4filelayout.h index 0ace0a2d6d7d..cebe01e3795e 100644 --- a/fs/nfs/nfs4filelayout.h +++ b/fs/nfs/nfs4filelayout.h @@ -98,6 +98,7 @@ u32 nfs4_fl_calc_ds_index(struct pnfs_layout_segment *lseg, u32 j); struct nfs4_pnfs_ds *nfs4_fl_prepare_ds(struct pnfs_layout_segment *lseg, u32 ds_idx); extern void nfs4_fl_put_deviceid(struct nfs4_file_layout_dsaddr *dsaddr); +extern void nfs4_fl_free_deviceid(struct nfs4_file_layout_dsaddr *dsaddr); struct nfs4_file_layout_dsaddr * get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_flags); diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index eda4527a57eb..5914659c8ec5 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -156,7 +156,7 @@ destroy_ds(struct nfs4_pnfs_ds *ds) kfree(ds); } -static void +void nfs4_fl_free_deviceid(struct nfs4_file_layout_dsaddr *dsaddr) { struct nfs4_pnfs_ds *ds; @@ -386,7 +386,9 @@ decode_device(struct inode *ino, struct pnfs_device *pdev, gfp_t gfp_flags) dsaddr->stripe_indices = stripe_indices; stripe_indices = NULL; dsaddr->ds_num = num; - nfs4_init_deviceid_node(&dsaddr->id_node, NFS_SERVER(ino)->nfs_client, + nfs4_init_deviceid_node(&dsaddr->id_node, + NFS_SERVER(ino)->pnfs_curr_ld, + NFS_SERVER(ino)->nfs_client, &pdev->dev_id); for (i = 0; i < dsaddr->ds_num; i++) { @@ -548,8 +550,7 @@ out_free: void nfs4_fl_put_deviceid(struct nfs4_file_layout_dsaddr *dsaddr) { - if (nfs4_put_deviceid_node(&dsaddr->id_node)) - nfs4_fl_free_deviceid(dsaddr); + nfs4_put_deviceid_node(&dsaddr->id_node); } /* diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 3831ad04a231..80a5d0e2cc43 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -65,6 +65,8 @@ enum { NFS_LAYOUT_DESTROYED, /* no new use of layout allowed */ }; +struct nfs4_deviceid_node; + /* Per-layout driver specific registration structure */ struct pnfs_layoutdriver_type { struct list_head pnfs_tblid; @@ -90,6 +92,8 @@ struct pnfs_layoutdriver_type { */ enum pnfs_try_status (*read_pagelist) (struct nfs_read_data *nfs_data); enum pnfs_try_status (*write_pagelist) (struct nfs_write_data *nfs_data, int how); + + void (*free_deviceid_node) (struct nfs4_deviceid_node *); }; struct pnfs_layout_hdr { @@ -160,6 +164,7 @@ int pnfs_layoutcommit_inode(struct inode *inode, bool sync); /* pnfs_dev.c */ struct nfs4_deviceid_node { struct hlist_node node; + const struct pnfs_layoutdriver_type *ld; const struct nfs_client *nfs_client; struct nfs4_deviceid deviceid; atomic_t ref; @@ -169,10 +174,12 @@ void nfs4_print_deviceid(const struct nfs4_deviceid *dev_id); struct nfs4_deviceid_node *nfs4_find_get_deviceid(const struct nfs_client *, const struct nfs4_deviceid *); struct nfs4_deviceid_node *nfs4_unhash_put_deviceid(const struct nfs_client *, const struct nfs4_deviceid *); void nfs4_init_deviceid_node(struct nfs4_deviceid_node *, + const struct pnfs_layoutdriver_type *, const struct nfs_client *, const struct nfs4_deviceid *); struct nfs4_deviceid_node *nfs4_insert_deviceid_node(struct nfs4_deviceid_node *); bool nfs4_put_deviceid_node(struct nfs4_deviceid_node *); +void nfs4_deviceid_purge_client(const struct nfs_client *); static inline int lo_fail_bit(u32 iomode) { @@ -349,6 +356,10 @@ static inline int pnfs_layoutcommit_inode(struct inode *inode, bool sync) { return 0; } + +static inline void nfs4_deviceid_purge_client(struct nfs_client *ncl) +{ +} #endif /* CONFIG_NFS_V4_1 */ #endif /* FS_NFS_PNFS_H */ diff --git a/fs/nfs/pnfs_dev.c b/fs/nfs/pnfs_dev.c index bf05189a7cbf..64a4b85c7dbc 100644 --- a/fs/nfs/pnfs_dev.c +++ b/fs/nfs/pnfs_dev.c @@ -96,11 +96,15 @@ EXPORT_SYMBOL_GPL(nfs4_find_get_deviceid); void nfs4_init_deviceid_node(struct nfs4_deviceid_node *d, + const struct pnfs_layoutdriver_type *ld, const struct nfs_client *nfs_client, const struct nfs4_deviceid *id) { + INIT_HLIST_NODE(&d->node); + d->ld = ld; d->nfs_client = nfs_client; d->deviceid = *id; + atomic_set(&d->ref, 1); } EXPORT_SYMBOL_GPL(nfs4_init_deviceid_node); @@ -108,7 +112,10 @@ EXPORT_SYMBOL_GPL(nfs4_init_deviceid_node); * Uniquely initialize and insert a deviceid node into cache * * @new new deviceid node - * Note that the caller must set up new->nfs_client and new->deviceid + * Note that the caller must set up the following members: + * new->ld + * new->nfs_client + * new->deviceid * * @ret the inserted node, if none found, otherwise, the found entry. */ @@ -125,8 +132,6 @@ nfs4_insert_deviceid_node(struct nfs4_deviceid_node *new) return d; } - INIT_HLIST_NODE(&new->node); - atomic_set(&new->ref, 1); hash = nfs4_deviceid_hash(&new->deviceid); hlist_add_head_rcu(&new->node, &nfs4_deviceid_cache[hash]); spin_unlock(&nfs4_deviceid_lock); @@ -151,6 +156,42 @@ nfs4_put_deviceid_node(struct nfs4_deviceid_node *d) hlist_del_init_rcu(&d->node); spin_unlock(&nfs4_deviceid_lock); synchronize_rcu(); + d->ld->free_deviceid_node(d); return true; } EXPORT_SYMBOL_GPL(nfs4_put_deviceid_node); + +static void +_deviceid_purge_client(const struct nfs_client *clp, long hash) +{ + struct nfs4_deviceid_node *d; + struct hlist_node *n, *next; + HLIST_HEAD(tmp); + + rcu_read_lock(); + hlist_for_each_entry_rcu(d, n, &nfs4_deviceid_cache[hash], node) + if (d->nfs_client == clp && atomic_read(&d->ref)) { + hlist_del_init_rcu(&d->node); + hlist_add_head(&d->node, &tmp); + } + rcu_read_unlock(); + + if (hlist_empty(&tmp)) + return; + + synchronize_rcu(); + hlist_for_each_entry_safe(d, n, next, &tmp, node) + if (atomic_dec_and_test(&d->ref)) + d->ld->free_deviceid_node(d); +} + +void +nfs4_deviceid_purge_client(const struct nfs_client *clp) +{ + long h; + + spin_lock(&nfs4_deviceid_lock); + for (h = 0; h < NFS4_DEVICE_ID_HASH_SIZE; h++) + _deviceid_purge_client(clp, h); + spin_unlock(&nfs4_deviceid_lock); +} -- cgit v1.2.3 From 5ccf92037c7c6e6f28175fd245284923f939259f Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 24 May 2011 02:16:51 -0500 Subject: eCryptfs: Cleanup inode initialization code The eCryptfs inode get, initialization, and dentry interposition code has two separate paths. One is for when dentry interposition is needed after doing things like a mkdir in the lower filesystem and the other is needed after a lookup. Unlocking new inodes and doing a d_add() needs to happen at different times, depending on which type of dentry interposing is being done. This patch cleans up the inode get and initialization code paths and splits them up so that the locking and d_add() differences mentioned above can be handled appropriately in a later patch. Signed-off-by: Tyler Hicks Tested-by: David --- fs/ecryptfs/ecryptfs_kernel.h | 3 - fs/ecryptfs/inode.c | 134 ++++++++++++++++++++++-------------------- 2 files changed, 69 insertions(+), 68 deletions(-) diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 37224b5fb12a..41a453236371 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -628,9 +628,6 @@ struct ecryptfs_open_req { struct inode *ecryptfs_get_inode(struct inode *lower_inode, struct super_block *sb); void ecryptfs_i_size_init(const char *page_virt, struct inode *inode); -int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry, - struct dentry *lower_dentry, - struct inode *ecryptfs_dir_inode); int ecryptfs_decode_and_decrypt_filename(char **decrypted_name, size_t *decrypted_name_size, struct dentry *ecryptfs_dentry, diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 704a8c8fe19a..fc7d2b748503 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -58,85 +58,87 @@ static int ecryptfs_inode_test(struct inode *inode, void *lower_inode) return 0; } -static int ecryptfs_inode_set(struct inode *inode, void *lower_inode) +static int ecryptfs_inode_set(struct inode *inode, void *opaque) { - ecryptfs_set_inode_lower(inode, (struct inode *)lower_inode); - inode->i_ino = ((struct inode *)lower_inode)->i_ino; + struct inode *lower_inode = opaque; + + ecryptfs_set_inode_lower(inode, lower_inode); + fsstack_copy_attr_all(inode, lower_inode); + /* i_size will be overwritten for encrypted regular files */ + fsstack_copy_inode_size(inode, lower_inode); + inode->i_ino = lower_inode->i_ino; inode->i_version++; - inode->i_op = &ecryptfs_main_iops; - inode->i_fop = &ecryptfs_main_fops; inode->i_mapping->a_ops = &ecryptfs_aops; + + if (S_ISLNK(inode->i_mode)) + inode->i_op = &ecryptfs_symlink_iops; + else if (S_ISDIR(inode->i_mode)) + inode->i_op = &ecryptfs_dir_iops; + else + inode->i_op = &ecryptfs_main_iops; + + if (S_ISDIR(inode->i_mode)) + inode->i_fop = &ecryptfs_dir_fops; + else if (special_file(inode->i_mode)) + init_special_inode(inode, inode->i_mode, inode->i_rdev); + else + inode->i_fop = &ecryptfs_main_fops; + return 0; } -struct inode *ecryptfs_get_inode(struct inode *lower_inode, - struct super_block *sb) +static struct inode *__ecryptfs_get_inode(struct inode *lower_inode, + struct super_block *sb) { struct inode *inode; - int rc = 0; - if (lower_inode->i_sb != ecryptfs_superblock_to_lower(sb)) { - rc = -EXDEV; - goto out; - } - if (!igrab(lower_inode)) { - rc = -ESTALE; - goto out; - } + if (lower_inode->i_sb != ecryptfs_superblock_to_lower(sb)) + return ERR_PTR(-EXDEV); + if (!igrab(lower_inode)) + return ERR_PTR(-ESTALE); inode = iget5_locked(sb, (unsigned long)lower_inode, ecryptfs_inode_test, ecryptfs_inode_set, lower_inode); if (!inode) { - rc = -EACCES; iput(lower_inode); - goto out; + return ERR_PTR(-EACCES); } - if (inode->i_state & I_NEW) - unlock_new_inode(inode); - else + if (!(inode->i_state & I_NEW)) iput(lower_inode); - if (S_ISLNK(lower_inode->i_mode)) - inode->i_op = &ecryptfs_symlink_iops; - else if (S_ISDIR(lower_inode->i_mode)) - inode->i_op = &ecryptfs_dir_iops; - if (S_ISDIR(lower_inode->i_mode)) - inode->i_fop = &ecryptfs_dir_fops; - if (special_file(lower_inode->i_mode)) - init_special_inode(inode, lower_inode->i_mode, - lower_inode->i_rdev); - fsstack_copy_attr_all(inode, lower_inode); - /* This size will be overwritten for real files w/ headers and - * other metadata */ - fsstack_copy_inode_size(inode, lower_inode); + + return inode; +} + +struct inode *ecryptfs_get_inode(struct inode *lower_inode, + struct super_block *sb) +{ + struct inode *inode = __ecryptfs_get_inode(lower_inode, sb); + + if (!IS_ERR(inode) && (inode->i_state & I_NEW)) + unlock_new_inode(inode); + return inode; -out: - return ERR_PTR(rc); } -#define ECRYPTFS_INTERPOSE_FLAG_D_ADD 0x00000001 /** * ecryptfs_interpose * @lower_dentry: Existing dentry in the lower filesystem * @dentry: ecryptfs' dentry * @sb: ecryptfs's super_block - * @flags: flags to govern behavior of interpose procedure * * Interposes upper and lower dentries. * * Returns zero on success; non-zero otherwise */ static int ecryptfs_interpose(struct dentry *lower_dentry, - struct dentry *dentry, struct super_block *sb, - u32 flags) + struct dentry *dentry, struct super_block *sb) { - struct inode *lower_inode = lower_dentry->d_inode; - struct inode *inode = ecryptfs_get_inode(lower_inode, sb); + struct inode *inode = ecryptfs_get_inode(lower_dentry->d_inode, sb); + if (IS_ERR(inode)) return PTR_ERR(inode); - if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD) - d_add(dentry, inode); - else - d_instantiate(dentry, inode); + d_instantiate(dentry, inode); + return 0; } @@ -218,7 +220,7 @@ ecryptfs_do_create(struct inode *directory_inode, goto out_lock; } rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry, - directory_inode->i_sb, 0); + directory_inode->i_sb); if (rc) { ecryptfs_printk(KERN_ERR, "Failure in ecryptfs_interpose\n"); goto out_lock; @@ -305,15 +307,15 @@ out: } /** - * ecryptfs_lookup_and_interpose_lower - Perform a lookup + * ecryptfs_lookup_interpose - Dentry interposition for a lookup */ -int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry, - struct dentry *lower_dentry, - struct inode *ecryptfs_dir_inode) +static int ecryptfs_lookup_interpose(struct dentry *ecryptfs_dentry, + struct dentry *lower_dentry, + struct inode *ecryptfs_dir_inode) { struct dentry *lower_dir_dentry; struct vfsmount *lower_mnt; - struct inode *lower_inode; + struct inode *inode, *lower_inode; struct ecryptfs_crypt_stat *crypt_stat; char *page_virt = NULL; int put_lower = 0, rc = 0; @@ -341,14 +343,16 @@ int ecryptfs_lookup_and_interpose_lower(struct dentry *ecryptfs_dentry, d_add(ecryptfs_dentry, NULL); goto out; } - rc = ecryptfs_interpose(lower_dentry, ecryptfs_dentry, - ecryptfs_dir_inode->i_sb, - ECRYPTFS_INTERPOSE_FLAG_D_ADD); - if (rc) { + inode = __ecryptfs_get_inode(lower_inode, ecryptfs_dir_inode->i_sb); + if (IS_ERR(inode)) { + rc = PTR_ERR(inode); printk(KERN_ERR "%s: Error interposing; rc = [%d]\n", __func__, rc); goto out; } + if (inode->i_state & I_NEW) + unlock_new_inode(inode); + d_add(ecryptfs_dentry, inode); if (S_ISDIR(lower_inode->i_mode)) goto out; if (S_ISLNK(lower_inode->i_mode)) @@ -442,12 +446,12 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode, goto out_d_drop; } if (lower_dentry->d_inode) - goto lookup_and_interpose; + goto interpose; mount_crypt_stat = &ecryptfs_superblock_to_private( ecryptfs_dentry->d_sb)->mount_crypt_stat; if (!(mount_crypt_stat && (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES))) - goto lookup_and_interpose; + goto interpose; dput(lower_dentry); rc = ecryptfs_encrypt_and_encode_filename( &encrypted_and_encoded_name, &encrypted_and_encoded_name_size, @@ -470,9 +474,9 @@ static struct dentry *ecryptfs_lookup(struct inode *ecryptfs_dir_inode, encrypted_and_encoded_name); goto out_d_drop; } -lookup_and_interpose: - rc = ecryptfs_lookup_and_interpose_lower(ecryptfs_dentry, lower_dentry, - ecryptfs_dir_inode); +interpose: + rc = ecryptfs_lookup_interpose(ecryptfs_dentry, lower_dentry, + ecryptfs_dir_inode); goto out; out_d_drop: d_drop(ecryptfs_dentry); @@ -500,7 +504,7 @@ static int ecryptfs_link(struct dentry *old_dentry, struct inode *dir, lower_new_dentry); if (rc || !lower_new_dentry->d_inode) goto out_lock; - rc = ecryptfs_interpose(lower_new_dentry, new_dentry, dir->i_sb, 0); + rc = ecryptfs_interpose(lower_new_dentry, new_dentry, dir->i_sb); if (rc) goto out_lock; fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode); @@ -567,7 +571,7 @@ static int ecryptfs_symlink(struct inode *dir, struct dentry *dentry, kfree(encoded_symname); if (rc || !lower_dentry->d_inode) goto out_lock; - rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb, 0); + rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb); if (rc) goto out_lock; fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode); @@ -591,7 +595,7 @@ static int ecryptfs_mkdir(struct inode *dir, struct dentry *dentry, int mode) rc = vfs_mkdir(lower_dir_dentry->d_inode, lower_dentry, mode); if (rc || !lower_dentry->d_inode) goto out; - rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb, 0); + rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb); if (rc) goto out; fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode); @@ -639,7 +643,7 @@ ecryptfs_mknod(struct inode *dir, struct dentry *dentry, int mode, dev_t dev) rc = vfs_mknod(lower_dir_dentry->d_inode, lower_dentry, mode, dev); if (rc || !lower_dentry->d_inode) goto out; - rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb, 0); + rc = ecryptfs_interpose(lower_dentry, dentry, dir->i_sb); if (rc) goto out; fsstack_copy_attr_times(dir, lower_dir_dentry->d_inode); -- cgit v1.2.3 From 1be5683b03a766670b3b629bf6bfeab3ca9239d8 Mon Sep 17 00:00:00 2001 From: Marc Eshel Date: Sun, 22 May 2011 19:47:09 +0300 Subject: pnfs: CB_NOTIFY_DEVICEID Note: This functionlaity is incomplete as all layout segments referring to the 'to be removed device id' need to be reaped, and all in flight I/O drained. [use be32 res in nfs4_callback_devicenotify] [use nfs_client to qualify deviceid for cb_notify_deviceid] [use global deviceid cache for CB_NOTIFY_DEVICEID] [refactor device cache _lookup_deviceid] [refactor device cache _find_get_deviceid] Signed-off-by: Benny Halevy [Bug in new global-device-cache code] [layout_driver MUST set free_deviceid_node if using dev-cache] Signed-off-by: Boaz Harrosh Signed-off-by: Benny Halevy --- fs/nfs/callback.h | 17 +++++++++ fs/nfs/callback_proc.c | 47 ++++++++++++++++++++++++ fs/nfs/callback_xdr.c | 96 +++++++++++++++++++++++++++++++++++++++++++++++++- fs/nfs/pnfs.h | 1 + fs/nfs/pnfs_dev.c | 95 +++++++++++++++++++++++++++++++++++++++++-------- 5 files changed, 241 insertions(+), 15 deletions(-) diff --git a/fs/nfs/callback.h b/fs/nfs/callback.h index 46d93ce7311b..b257383bb565 100644 --- a/fs/nfs/callback.h +++ b/fs/nfs/callback.h @@ -167,6 +167,23 @@ extern unsigned nfs4_callback_layoutrecall( extern void nfs4_check_drain_bc_complete(struct nfs4_session *ses); extern void nfs4_cb_take_slot(struct nfs_client *clp); + +struct cb_devicenotifyitem { + uint32_t cbd_notify_type; + uint32_t cbd_layout_type; + struct nfs4_deviceid cbd_dev_id; + uint32_t cbd_immediate; +}; + +struct cb_devicenotifyargs { + int ndevs; + struct cb_devicenotifyitem *devs; +}; + +extern __be32 nfs4_callback_devicenotify( + struct cb_devicenotifyargs *args, + void *dummy, struct cb_process_state *cps); + #endif /* CONFIG_NFS_V4_1 */ extern int check_gss_callback_principal(struct nfs_client *, struct svc_rqst *); extern __be32 nfs4_callback_getattr(struct cb_getattrargs *args, diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index 2f41dccea18e..fb5e5b9a97ae 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -241,6 +241,53 @@ static void pnfs_recall_all_layouts(struct nfs_client *clp) do_callback_layoutrecall(clp, &args); } +__be32 nfs4_callback_devicenotify(struct cb_devicenotifyargs *args, + void *dummy, struct cb_process_state *cps) +{ + int i; + __be32 res = 0; + struct nfs_client *clp = cps->clp; + struct nfs_server *server = NULL; + + dprintk("%s: -->\n", __func__); + + if (!clp) { + res = cpu_to_be32(NFS4ERR_OP_NOT_IN_SESSION); + goto out; + } + + for (i = 0; i < args->ndevs; i++) { + struct cb_devicenotifyitem *dev = &args->devs[i]; + + if (!server || + server->pnfs_curr_ld->id != dev->cbd_layout_type) { + rcu_read_lock(); + list_for_each_entry_rcu(server, &clp->cl_superblocks, client_link) + if (server->pnfs_curr_ld && + server->pnfs_curr_ld->id == dev->cbd_layout_type) { + rcu_read_unlock(); + goto found; + } + rcu_read_unlock(); + dprintk("%s: layout type %u not found\n", + __func__, dev->cbd_layout_type); + continue; + } + + found: + if (dev->cbd_notify_type == NOTIFY_DEVICEID4_CHANGE) + dprintk("%s: NOTIFY_DEVICEID4_CHANGE not supported, " + "deleting instead\n", __func__); + nfs4_delete_deviceid(clp, &dev->cbd_dev_id); + } + +out: + kfree(args->devs); + dprintk("%s: exit with status = %u\n", + __func__, be32_to_cpu(res)); + return res; +} + int nfs41_validate_delegation_stateid(struct nfs_delegation *delegation, const nfs4_stateid *stateid) { if (delegation == NULL) diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c index 00ecf62ce7c1..c6c86a77e043 100644 --- a/fs/nfs/callback_xdr.c +++ b/fs/nfs/callback_xdr.c @@ -25,6 +25,7 @@ #if defined(CONFIG_NFS_V4_1) #define CB_OP_LAYOUTRECALL_RES_MAXSZ (CB_OP_HDR_RES_MAXSZ) +#define CB_OP_DEVICENOTIFY_RES_MAXSZ (CB_OP_HDR_RES_MAXSZ) #define CB_OP_SEQUENCE_RES_MAXSZ (CB_OP_HDR_RES_MAXSZ + \ 4 + 1 + 3) #define CB_OP_RECALLANY_RES_MAXSZ (CB_OP_HDR_RES_MAXSZ) @@ -284,6 +285,93 @@ out: return status; } +static +__be32 decode_devicenotify_args(struct svc_rqst *rqstp, + struct xdr_stream *xdr, + struct cb_devicenotifyargs *args) +{ + __be32 *p; + __be32 status = 0; + u32 tmp; + int n, i; + args->ndevs = 0; + + /* Num of device notifications */ + p = read_buf(xdr, sizeof(uint32_t)); + if (unlikely(p == NULL)) { + status = htonl(NFS4ERR_BADXDR); + goto out; + } + n = ntohl(*p++); + if (n <= 0) + goto out; + + args->devs = kmalloc(n * sizeof(*args->devs), GFP_KERNEL); + if (!args->devs) { + status = htonl(NFS4ERR_DELAY); + goto out; + } + + /* Decode each dev notification */ + for (i = 0; i < n; i++) { + struct cb_devicenotifyitem *dev = &args->devs[i]; + + p = read_buf(xdr, (4 * sizeof(uint32_t)) + NFS4_DEVICEID4_SIZE); + if (unlikely(p == NULL)) { + status = htonl(NFS4ERR_BADXDR); + goto err; + } + + tmp = ntohl(*p++); /* bitmap size */ + if (tmp != 1) { + status = htonl(NFS4ERR_INVAL); + goto err; + } + dev->cbd_notify_type = ntohl(*p++); + if (dev->cbd_notify_type != NOTIFY_DEVICEID4_CHANGE && + dev->cbd_notify_type != NOTIFY_DEVICEID4_DELETE) { + status = htonl(NFS4ERR_INVAL); + goto err; + } + + tmp = ntohl(*p++); /* opaque size */ + if (((dev->cbd_notify_type == NOTIFY_DEVICEID4_CHANGE) && + (tmp != NFS4_DEVICEID4_SIZE + 8)) || + ((dev->cbd_notify_type == NOTIFY_DEVICEID4_DELETE) && + (tmp != NFS4_DEVICEID4_SIZE + 4))) { + status = htonl(NFS4ERR_INVAL); + goto err; + } + dev->cbd_layout_type = ntohl(*p++); + memcpy(dev->cbd_dev_id.data, p, NFS4_DEVICEID4_SIZE); + p += XDR_QUADLEN(NFS4_DEVICEID4_SIZE); + + if (dev->cbd_layout_type == NOTIFY_DEVICEID4_CHANGE) { + p = read_buf(xdr, sizeof(uint32_t)); + if (unlikely(p == NULL)) { + status = htonl(NFS4ERR_BADXDR); + goto err; + } + dev->cbd_immediate = ntohl(*p++); + } else { + dev->cbd_immediate = 0; + } + + args->ndevs++; + + dprintk("%s: type %d layout 0x%x immediate %d\n", + __func__, dev->cbd_notify_type, dev->cbd_layout_type, + dev->cbd_immediate); + } +out: + dprintk("%s: status %d ndevs %d\n", + __func__, ntohl(status), args->ndevs); + return status; +err: + kfree(args->devs); + goto out; +} + static __be32 decode_sessionid(struct xdr_stream *xdr, struct nfs4_sessionid *sid) { @@ -639,10 +727,10 @@ preprocess_nfs41_op(int nop, unsigned int op_nr, struct callback_op **op) case OP_CB_RECALL_ANY: case OP_CB_RECALL_SLOT: case OP_CB_LAYOUTRECALL: + case OP_CB_NOTIFY_DEVICEID: *op = &callback_ops[op_nr]; break; - case OP_CB_NOTIFY_DEVICEID: case OP_CB_NOTIFY: case OP_CB_PUSH_DELEG: case OP_CB_RECALLABLE_OBJ_AVAIL: @@ -849,6 +937,12 @@ static struct callback_op callback_ops[] = { (callback_decode_arg_t)decode_layoutrecall_args, .res_maxsize = CB_OP_LAYOUTRECALL_RES_MAXSZ, }, + [OP_CB_NOTIFY_DEVICEID] = { + .process_op = (callback_process_op_t)nfs4_callback_devicenotify, + .decode_args = + (callback_decode_arg_t)decode_devicenotify_args, + .res_maxsize = CB_OP_DEVICENOTIFY_RES_MAXSZ, + }, [OP_CB_SEQUENCE] = { .process_op = (callback_process_op_t)nfs4_callback_sequence, .decode_args = (callback_decode_arg_t)decode_cb_sequence_args, diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 80a5d0e2cc43..fbd3f7cd9e71 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -173,6 +173,7 @@ struct nfs4_deviceid_node { void nfs4_print_deviceid(const struct nfs4_deviceid *dev_id); struct nfs4_deviceid_node *nfs4_find_get_deviceid(const struct nfs_client *, const struct nfs4_deviceid *); struct nfs4_deviceid_node *nfs4_unhash_put_deviceid(const struct nfs_client *, const struct nfs4_deviceid *); +void nfs4_delete_deviceid(const struct nfs_client *, const struct nfs4_deviceid *); void nfs4_init_deviceid_node(struct nfs4_deviceid_node *, const struct pnfs_layoutdriver_type *, const struct nfs_client *, diff --git a/fs/nfs/pnfs_dev.c b/fs/nfs/pnfs_dev.c index 64a4b85c7dbc..8fd3839df299 100644 --- a/fs/nfs/pnfs_dev.c +++ b/fs/nfs/pnfs_dev.c @@ -66,33 +66,100 @@ nfs4_deviceid_hash(const struct nfs4_deviceid *id) return x & NFS4_DEVICE_ID_HASH_MASK; } +static struct nfs4_deviceid_node * +_lookup_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id, + long hash) +{ + struct nfs4_deviceid_node *d; + struct hlist_node *n; + + hlist_for_each_entry_rcu(d, n, &nfs4_deviceid_cache[hash], node) + if (d->nfs_client == clp && !memcmp(&d->deviceid, id, sizeof(*id))) { + if (atomic_read(&d->ref)) + return d; + else + continue; + } + return NULL; +} + /* * Lookup a deviceid in cache and get a reference count on it if found * * @clp nfs_client associated with deviceid * @id deviceid to look up */ +struct nfs4_deviceid_node * +_find_get_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id, + long hash) +{ + struct nfs4_deviceid_node *d; + + rcu_read_lock(); + d = _lookup_deviceid(clp, id, hash); + if (d && !atomic_inc_not_zero(&d->ref)) + d = NULL; + rcu_read_unlock(); + return d; +} + struct nfs4_deviceid_node * nfs4_find_get_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id) +{ + return _find_get_deviceid(clp, id, nfs4_deviceid_hash(id)); +} +EXPORT_SYMBOL_GPL(nfs4_find_get_deviceid); + +/* + * Unhash and put deviceid + * + * @clp nfs_client associated with deviceid + * @id the deviceid to unhash + * + * @ret the unhashed node, if found and dereferenced to zero, NULL otherwise. + */ +struct nfs4_deviceid_node * +nfs4_unhash_put_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id) { struct nfs4_deviceid_node *d; - struct hlist_node *n; - long hash = nfs4_deviceid_hash(id); + spin_lock(&nfs4_deviceid_lock); rcu_read_lock(); - hlist_for_each_entry_rcu(d, n, &nfs4_deviceid_cache[hash], node) { - if (d->nfs_client == clp && !memcmp(&d->deviceid, id, sizeof(*id))) { - if (!atomic_inc_not_zero(&d->ref)) - goto fail; - rcu_read_unlock(); - return d; - } - } -fail: + d = _lookup_deviceid(clp, id, nfs4_deviceid_hash(id)); rcu_read_unlock(); + if (!d) { + spin_unlock(&nfs4_deviceid_lock); + return NULL; + } + hlist_del_init_rcu(&d->node); + spin_unlock(&nfs4_deviceid_lock); + synchronize_rcu(); + + /* balance the initial ref set in pnfs_insert_deviceid */ + if (atomic_dec_and_test(&d->ref)) + return d; + return NULL; } -EXPORT_SYMBOL_GPL(nfs4_find_get_deviceid); +EXPORT_SYMBOL_GPL(nfs4_unhash_put_deviceid); + +/* + * Delete a deviceid from cache + * + * @clp struct nfs_client qualifying the deviceid + * @id deviceid to delete + */ +void +nfs4_delete_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id) +{ + struct nfs4_deviceid_node *d; + + d = nfs4_unhash_put_deviceid(clp, id); + if (!d) + return; + d->ld->free_deviceid_node(d); +} +EXPORT_SYMBOL_GPL(nfs4_delete_deviceid); void nfs4_init_deviceid_node(struct nfs4_deviceid_node *d, @@ -126,13 +193,13 @@ nfs4_insert_deviceid_node(struct nfs4_deviceid_node *new) long hash; spin_lock(&nfs4_deviceid_lock); - d = nfs4_find_get_deviceid(new->nfs_client, &new->deviceid); + hash = nfs4_deviceid_hash(&new->deviceid); + d = _find_get_deviceid(new->nfs_client, &new->deviceid, hash); if (d) { spin_unlock(&nfs4_deviceid_lock); return d; } - hash = nfs4_deviceid_hash(&new->deviceid); hlist_add_head_rcu(&new->node, &nfs4_deviceid_cache[hash]); spin_unlock(&nfs4_deviceid_lock); -- cgit v1.2.3 From 35c8bb543c9e83197e6375142d1d1c2ee3cf017d Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Tue, 24 May 2011 18:04:02 +0300 Subject: NFSv4.1: use layout driver in global device cache pnfs deviceids are unique per server, per layout type. struct nfs_client is currently used to distinguish deviceids from different nfs servers, yet these may clash between different layout types on the same server. Therefore, use the layout driver associated with each deviceid at insertion time to look it up, unhash, or delete it. Signed-off-by: Benny Halevy --- fs/nfs/callback_proc.c | 2 +- fs/nfs/nfs4filelayout.c | 3 ++- fs/nfs/pnfs.h | 6 +++--- fs/nfs/pnfs_dev.c | 28 +++++++++++++++++----------- 4 files changed, 23 insertions(+), 16 deletions(-) diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index fb5e5b9a97ae..c73e7b2fb8e2 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -278,7 +278,7 @@ __be32 nfs4_callback_devicenotify(struct cb_devicenotifyargs *args, if (dev->cbd_notify_type == NOTIFY_DEVICEID4_CHANGE) dprintk("%s: NOTIFY_DEVICEID4_CHANGE not supported, " "deleting instead\n", __func__); - nfs4_delete_deviceid(clp, &dev->cbd_dev_id); + nfs4_delete_deviceid(server->pnfs_curr_ld, clp, &dev->cbd_dev_id); } out: diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index cd289d9b7de7..501a9b86b318 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -441,7 +441,8 @@ filelayout_check_layout(struct pnfs_layout_hdr *lo, } /* find and reference the deviceid */ - d = nfs4_find_get_deviceid(NFS_SERVER(lo->plh_inode)->nfs_client, id); + d = nfs4_find_get_deviceid(NFS_SERVER(lo->plh_inode)->pnfs_curr_ld, + NFS_SERVER(lo->plh_inode)->nfs_client, id); if (d == NULL) { dsaddr = get_device_info(lo->plh_inode, id, gfp_flags); if (dsaddr == NULL) diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index fbd3f7cd9e71..5b083d295334 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -171,9 +171,9 @@ struct nfs4_deviceid_node { }; void nfs4_print_deviceid(const struct nfs4_deviceid *dev_id); -struct nfs4_deviceid_node *nfs4_find_get_deviceid(const struct nfs_client *, const struct nfs4_deviceid *); -struct nfs4_deviceid_node *nfs4_unhash_put_deviceid(const struct nfs_client *, const struct nfs4_deviceid *); -void nfs4_delete_deviceid(const struct nfs_client *, const struct nfs4_deviceid *); +struct nfs4_deviceid_node *nfs4_find_get_deviceid(const struct pnfs_layoutdriver_type *, const struct nfs_client *, const struct nfs4_deviceid *); +struct nfs4_deviceid_node *nfs4_unhash_put_deviceid(const struct pnfs_layoutdriver_type *, const struct nfs_client *, const struct nfs4_deviceid *); +void nfs4_delete_deviceid(const struct pnfs_layoutdriver_type *, const struct nfs_client *, const struct nfs4_deviceid *); void nfs4_init_deviceid_node(struct nfs4_deviceid_node *, const struct pnfs_layoutdriver_type *, const struct nfs_client *, diff --git a/fs/nfs/pnfs_dev.c b/fs/nfs/pnfs_dev.c index 8fd3839df299..c65e133ce9c0 100644 --- a/fs/nfs/pnfs_dev.c +++ b/fs/nfs/pnfs_dev.c @@ -67,14 +67,16 @@ nfs4_deviceid_hash(const struct nfs4_deviceid *id) } static struct nfs4_deviceid_node * -_lookup_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id, +_lookup_deviceid(const struct pnfs_layoutdriver_type *ld, + const struct nfs_client *clp, const struct nfs4_deviceid *id, long hash) { struct nfs4_deviceid_node *d; struct hlist_node *n; hlist_for_each_entry_rcu(d, n, &nfs4_deviceid_cache[hash], node) - if (d->nfs_client == clp && !memcmp(&d->deviceid, id, sizeof(*id))) { + if (d->ld == ld && d->nfs_client == clp && + !memcmp(&d->deviceid, id, sizeof(*id))) { if (atomic_read(&d->ref)) return d; else @@ -90,13 +92,14 @@ _lookup_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id, * @id deviceid to look up */ struct nfs4_deviceid_node * -_find_get_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id, +_find_get_deviceid(const struct pnfs_layoutdriver_type *ld, + const struct nfs_client *clp, const struct nfs4_deviceid *id, long hash) { struct nfs4_deviceid_node *d; rcu_read_lock(); - d = _lookup_deviceid(clp, id, hash); + d = _lookup_deviceid(ld, clp, id, hash); if (d && !atomic_inc_not_zero(&d->ref)) d = NULL; rcu_read_unlock(); @@ -104,9 +107,10 @@ _find_get_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id, } struct nfs4_deviceid_node * -nfs4_find_get_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id) +nfs4_find_get_deviceid(const struct pnfs_layoutdriver_type *ld, + const struct nfs_client *clp, const struct nfs4_deviceid *id) { - return _find_get_deviceid(clp, id, nfs4_deviceid_hash(id)); + return _find_get_deviceid(ld, clp, id, nfs4_deviceid_hash(id)); } EXPORT_SYMBOL_GPL(nfs4_find_get_deviceid); @@ -119,13 +123,14 @@ EXPORT_SYMBOL_GPL(nfs4_find_get_deviceid); * @ret the unhashed node, if found and dereferenced to zero, NULL otherwise. */ struct nfs4_deviceid_node * -nfs4_unhash_put_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id) +nfs4_unhash_put_deviceid(const struct pnfs_layoutdriver_type *ld, + const struct nfs_client *clp, const struct nfs4_deviceid *id) { struct nfs4_deviceid_node *d; spin_lock(&nfs4_deviceid_lock); rcu_read_lock(); - d = _lookup_deviceid(clp, id, nfs4_deviceid_hash(id)); + d = _lookup_deviceid(ld, clp, id, nfs4_deviceid_hash(id)); rcu_read_unlock(); if (!d) { spin_unlock(&nfs4_deviceid_lock); @@ -150,11 +155,12 @@ EXPORT_SYMBOL_GPL(nfs4_unhash_put_deviceid); * @id deviceid to delete */ void -nfs4_delete_deviceid(const struct nfs_client *clp, const struct nfs4_deviceid *id) +nfs4_delete_deviceid(const struct pnfs_layoutdriver_type *ld, + const struct nfs_client *clp, const struct nfs4_deviceid *id) { struct nfs4_deviceid_node *d; - d = nfs4_unhash_put_deviceid(clp, id); + d = nfs4_unhash_put_deviceid(ld, clp, id); if (!d) return; d->ld->free_deviceid_node(d); @@ -194,7 +200,7 @@ nfs4_insert_deviceid_node(struct nfs4_deviceid_node *new) spin_lock(&nfs4_deviceid_lock); hash = nfs4_deviceid_hash(&new->deviceid); - d = _find_get_deviceid(new->nfs_client, &new->deviceid, hash); + d = _find_get_deviceid(new->ld, new->nfs_client, &new->deviceid, hash); if (d) { spin_unlock(&nfs4_deviceid_lock); return d; -- cgit v1.2.3 From f7da7a129d57bfe0f74573dc03531c63e1360fae Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Thu, 19 May 2011 14:16:47 -0400 Subject: SUNRPC: introduce xdr_init_decode_pages Initialize xdr_stream and xdr_buf using an array of page pointers and length of buffer. Signed-off-by: Benny Halevy --- fs/nfs/dir.c | 9 ++------- fs/nfs/nfs4filelayout.c | 9 ++------- fs/nfs/nfs4filelayoutdev.c | 9 ++------- include/linux/sunrpc/xdr.h | 2 ++ net/sunrpc/xdr.c | 19 +++++++++++++++++++ 5 files changed, 27 insertions(+), 21 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 7237672216c8..f673a9e1d95d 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -512,12 +512,7 @@ int nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *en struct page **xdr_pages, struct page *page, unsigned int buflen) { struct xdr_stream stream; - struct xdr_buf buf = { - .pages = xdr_pages, - .page_len = buflen, - .buflen = buflen, - .len = buflen, - }; + struct xdr_buf buf; struct page *scratch; struct nfs_cache_array *array; unsigned int count = 0; @@ -527,7 +522,7 @@ int nfs_readdir_page_filler(nfs_readdir_descriptor_t *desc, struct nfs_entry *en if (scratch == NULL) return -ENOMEM; - xdr_init_decode(&stream, &buf, NULL); + xdr_init_decode_pages(&stream, &buf, xdr_pages, buflen); xdr_set_scratch_buffer(&stream, page_address(scratch), PAGE_SIZE); do { diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 501a9b86b318..33bda24e8cd2 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -510,12 +510,7 @@ filelayout_decode_layout(struct pnfs_layout_hdr *flo, gfp_t gfp_flags) { struct xdr_stream stream; - struct xdr_buf buf = { - .pages = lgr->layoutp->pages, - .page_len = lgr->layoutp->len, - .buflen = lgr->layoutp->len, - .len = lgr->layoutp->len, - }; + struct xdr_buf buf; struct page *scratch; __be32 *p; uint32_t nfl_util; @@ -527,7 +522,7 @@ filelayout_decode_layout(struct pnfs_layout_hdr *flo, if (!scratch) return -ENOMEM; - xdr_init_decode(&stream, &buf, NULL); + xdr_init_decode_pages(&stream, &buf, lgr->layoutp->pages, lgr->layoutp->len); xdr_set_scratch_buffer(&stream, page_address(scratch), PAGE_SIZE); /* 20 = ufl_util (4), first_stripe_index (4), pattern_offset (8), diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index 5914659c8ec5..3b7bf1377264 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -308,12 +308,7 @@ decode_device(struct inode *ino, struct pnfs_device *pdev, gfp_t gfp_flags) u8 max_stripe_index; struct nfs4_file_layout_dsaddr *dsaddr = NULL; struct xdr_stream stream; - struct xdr_buf buf = { - .pages = pdev->pages, - .page_len = pdev->pglen, - .buflen = pdev->pglen, - .len = pdev->pglen, - }; + struct xdr_buf buf; struct page *scratch; /* set up xdr stream */ @@ -321,7 +316,7 @@ decode_device(struct inode *ino, struct pnfs_device *pdev, gfp_t gfp_flags) if (!scratch) goto out_err; - xdr_init_decode(&stream, &buf, NULL); + xdr_init_decode_pages(&stream, &buf, pdev->pages, pdev->pglen); xdr_set_scratch_buffer(&stream, page_address(scratch), PAGE_SIZE); /* Get the stripe count (number of stripe index) */ diff --git a/include/linux/sunrpc/xdr.h b/include/linux/sunrpc/xdr.h index fc84b7a19ca3..a20970ef9e4e 100644 --- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -216,6 +216,8 @@ extern __be32 *xdr_reserve_space(struct xdr_stream *xdr, size_t nbytes); extern void xdr_write_pages(struct xdr_stream *xdr, struct page **pages, unsigned int base, unsigned int len); extern void xdr_init_decode(struct xdr_stream *xdr, struct xdr_buf *buf, __be32 *p); +extern void xdr_init_decode_pages(struct xdr_stream *xdr, struct xdr_buf *buf, + struct page **pages, unsigned int len); extern void xdr_set_scratch_buffer(struct xdr_stream *xdr, void *buf, size_t buflen); extern __be32 *xdr_inline_decode(struct xdr_stream *xdr, size_t nbytes); extern void xdr_read_pages(struct xdr_stream *xdr, unsigned int len); diff --git a/net/sunrpc/xdr.c b/net/sunrpc/xdr.c index 679cd674b81d..f008c14ad34c 100644 --- a/net/sunrpc/xdr.c +++ b/net/sunrpc/xdr.c @@ -638,6 +638,25 @@ void xdr_init_decode(struct xdr_stream *xdr, struct xdr_buf *buf, __be32 *p) } EXPORT_SYMBOL_GPL(xdr_init_decode); +/** + * xdr_init_decode - Initialize an xdr_stream for decoding data. + * @xdr: pointer to xdr_stream struct + * @buf: pointer to XDR buffer from which to decode data + * @pages: list of pages to decode into + * @len: length in bytes of buffer in pages + */ +void xdr_init_decode_pages(struct xdr_stream *xdr, struct xdr_buf *buf, + struct page **pages, unsigned int len) +{ + memset(buf, 0, sizeof(*buf)); + buf->pages = pages; + buf->page_len = len; + buf->buflen = len; + buf->len = len; + xdr_init_decode(xdr, buf, NULL); +} +EXPORT_SYMBOL_GPL(xdr_init_decode_pages); + static __be32 * __xdr_inline_decode(struct xdr_stream *xdr, size_t nbytes) { __be32 *p = xdr->p; -- cgit v1.2.3 From fb3296eb4636763918edef2d22e45b85b15d4518 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 22 May 2011 19:47:26 +0300 Subject: pnfs: Use byte-range for layoutget Add offset and count parameters to pnfs_update_layout and use them to get the layout in the pageio path. Order cache layout segments in the following order: * offset (ascending) * length (descending) * iomode (RW before READ) Test byte range against the layout segment in use in pnfs_{read,write}_pg_test so not to coalesce pages not using the same layout segment. [fix lseg ordering] [clean up pnfs_find_lseg lseg arg] [remove unnecessary FIXME] [fix ordering in pnfs_insert_layout] [clean up pnfs_insert_layout] Signed-off-by: Benny Halevy --- fs/nfs/pnfs.c | 165 +++++++++++++++++++++++++++++++++++++++++++-------------- fs/nfs/pnfs.h | 6 ++- fs/nfs/read.c | 8 ++- fs/nfs/write.c | 8 ++- 4 files changed, 142 insertions(+), 45 deletions(-) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index f57f5281a520..c2f09e9b670e 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -261,6 +261,65 @@ put_lseg(struct pnfs_layout_segment *lseg) } EXPORT_SYMBOL_GPL(put_lseg); +static inline u64 +end_offset(u64 start, u64 len) +{ + u64 end; + + end = start + len; + return end >= start ? end : NFS4_MAX_UINT64; +} + +/* last octet in a range */ +static inline u64 +last_byte_offset(u64 start, u64 len) +{ + u64 end; + + BUG_ON(!len); + end = start + len; + return end > start ? end - 1 : NFS4_MAX_UINT64; +} + +/* + * is l2 fully contained in l1? + * start1 end1 + * [----------------------------------) + * start2 end2 + * [----------------) + */ +static inline int +lo_seg_contained(struct pnfs_layout_range *l1, + struct pnfs_layout_range *l2) +{ + u64 start1 = l1->offset; + u64 end1 = end_offset(start1, l1->length); + u64 start2 = l2->offset; + u64 end2 = end_offset(start2, l2->length); + + return (start1 <= start2) && (end1 >= end2); +} + +/* + * is l1 and l2 intersecting? + * start1 end1 + * [----------------------------------) + * start2 end2 + * [----------------) + */ +static inline int +lo_seg_intersecting(struct pnfs_layout_range *l1, + struct pnfs_layout_range *l2) +{ + u64 start1 = l1->offset; + u64 end1 = end_offset(start1, l1->length); + u64 start2 = l2->offset; + u64 end2 = end_offset(start2, l2->length); + + return (end1 == NFS4_MAX_UINT64 || end1 > start2) && + (end2 == NFS4_MAX_UINT64 || end2 > start1); +} + static bool should_free_lseg(u32 lseg_iomode, u32 recall_iomode) { @@ -467,7 +526,7 @@ pnfs_choose_layoutget_stateid(nfs4_stateid *dst, struct pnfs_layout_hdr *lo, static struct pnfs_layout_segment * send_layoutget(struct pnfs_layout_hdr *lo, struct nfs_open_context *ctx, - u32 iomode, + struct pnfs_layout_range *range, gfp_t gfp_flags) { struct inode *ino = lo->plh_inode; @@ -499,11 +558,11 @@ send_layoutget(struct pnfs_layout_hdr *lo, goto out_err_free; } - lgp->args.minlength = NFS4_MAX_UINT64; + lgp->args.minlength = PAGE_CACHE_SIZE; + if (lgp->args.minlength > range->length) + lgp->args.minlength = range->length; lgp->args.maxcount = PNFS_LAYOUT_MAXSIZE; - lgp->args.range.iomode = iomode; - lgp->args.range.offset = 0; - lgp->args.range.length = NFS4_MAX_UINT64; + lgp->args.range = *range; lgp->args.type = server->pnfs_curr_ld->id; lgp->args.inode = ino; lgp->args.ctx = get_nfs_open_context(ctx); @@ -518,7 +577,7 @@ send_layoutget(struct pnfs_layout_hdr *lo, nfs4_proc_layoutget(lgp); if (!lseg) { /* remember that LAYOUTGET failed and suspend trying */ - set_bit(lo_fail_bit(iomode), &lo->plh_flags); + set_bit(lo_fail_bit(range->iomode), &lo->plh_flags); } /* free xdr pages */ @@ -625,10 +684,23 @@ bool pnfs_roc_drain(struct inode *ino, u32 *barrier) * are seen first. */ static s64 -cmp_layout(u32 iomode1, u32 iomode2) +cmp_layout(struct pnfs_layout_range *l1, + struct pnfs_layout_range *l2) { + s64 d; + + /* high offset > low offset */ + d = l1->offset - l2->offset; + if (d) + return d; + + /* short length > long length */ + d = l2->length - l1->length; + if (d) + return d; + /* read > read/write */ - return (int)(iomode2 == IOMODE_READ) - (int)(iomode1 == IOMODE_READ); + return (int)(l1->iomode == IOMODE_READ) - (int)(l2->iomode == IOMODE_READ); } static void @@ -636,13 +708,12 @@ pnfs_insert_layout(struct pnfs_layout_hdr *lo, struct pnfs_layout_segment *lseg) { struct pnfs_layout_segment *lp; - int found = 0; dprintk("%s:Begin\n", __func__); assert_spin_locked(&lo->plh_inode->i_lock); list_for_each_entry(lp, &lo->plh_segs, pls_list) { - if (cmp_layout(lp->pls_range.iomode, lseg->pls_range.iomode) > 0) + if (cmp_layout(&lseg->pls_range, &lp->pls_range) > 0) continue; list_add_tail(&lseg->pls_list, &lp->pls_list); dprintk("%s: inserted lseg %p " @@ -652,16 +723,14 @@ pnfs_insert_layout(struct pnfs_layout_hdr *lo, lseg->pls_range.offset, lseg->pls_range.length, lp, lp->pls_range.iomode, lp->pls_range.offset, lp->pls_range.length); - found = 1; - break; - } - if (!found) { - list_add_tail(&lseg->pls_list, &lo->plh_segs); - dprintk("%s: inserted lseg %p " - "iomode %d offset %llu length %llu at tail\n", - __func__, lseg, lseg->pls_range.iomode, - lseg->pls_range.offset, lseg->pls_range.length); + goto out; } + list_add_tail(&lseg->pls_list, &lo->plh_segs); + dprintk("%s: inserted lseg %p " + "iomode %d offset %llu length %llu at tail\n", + __func__, lseg, lseg->pls_range.iomode, + lseg->pls_range.offset, lseg->pls_range.length); +out: get_layout_hdr(lo); dprintk("%s:Return\n", __func__); @@ -721,16 +790,28 @@ pnfs_find_alloc_layout(struct inode *ino, gfp_t gfp_flags) * READ RW true */ static int -is_matching_lseg(struct pnfs_layout_segment *lseg, u32 iomode) +is_matching_lseg(struct pnfs_layout_range *ls_range, + struct pnfs_layout_range *range) { - return (iomode != IOMODE_RW || lseg->pls_range.iomode == IOMODE_RW); + struct pnfs_layout_range range1; + + if ((range->iomode == IOMODE_RW && + ls_range->iomode != IOMODE_RW) || + !lo_seg_intersecting(ls_range, range)) + return 0; + + /* range1 covers only the first byte in the range */ + range1 = *range; + range1.length = 1; + return lo_seg_contained(ls_range, &range1); } /* * lookup range in layout */ static struct pnfs_layout_segment * -pnfs_find_lseg(struct pnfs_layout_hdr *lo, u32 iomode) +pnfs_find_lseg(struct pnfs_layout_hdr *lo, + struct pnfs_layout_range *range) { struct pnfs_layout_segment *lseg, *ret = NULL; @@ -739,11 +820,11 @@ pnfs_find_lseg(struct pnfs_layout_hdr *lo, u32 iomode) assert_spin_locked(&lo->plh_inode->i_lock); list_for_each_entry(lseg, &lo->plh_segs, pls_list) { if (test_bit(NFS_LSEG_VALID, &lseg->pls_flags) && - is_matching_lseg(lseg, iomode)) { + is_matching_lseg(&lseg->pls_range, range)) { ret = get_lseg(lseg); break; } - if (cmp_layout(iomode, lseg->pls_range.iomode) > 0) + if (cmp_layout(range, &lseg->pls_range) > 0) break; } @@ -759,9 +840,16 @@ pnfs_find_lseg(struct pnfs_layout_hdr *lo, u32 iomode) struct pnfs_layout_segment * pnfs_update_layout(struct inode *ino, struct nfs_open_context *ctx, + loff_t pos, + u64 count, enum pnfs_iomode iomode, gfp_t gfp_flags) { + struct pnfs_layout_range arg = { + .iomode = iomode, + .offset = pos, + .length = count, + }; struct nfs_inode *nfsi = NFS_I(ino); struct nfs_client *clp = NFS_SERVER(ino)->nfs_client; struct pnfs_layout_hdr *lo; @@ -789,7 +877,7 @@ pnfs_update_layout(struct inode *ino, goto out_unlock; /* Check to see if the layout for the given range already exists */ - lseg = pnfs_find_lseg(lo, iomode); + lseg = pnfs_find_lseg(lo, &arg); if (lseg) goto out_unlock; @@ -811,7 +899,7 @@ pnfs_update_layout(struct inode *ino, spin_unlock(&clp->cl_lock); } - lseg = send_layoutget(lo, ctx, iomode, gfp_flags); + lseg = send_layoutget(lo, ctx, &arg, gfp_flags); if (!lseg && first) { spin_lock(&clp->cl_lock); list_del_init(&lo->plh_layouts); @@ -838,17 +926,6 @@ pnfs_layout_process(struct nfs4_layoutget *lgp) struct nfs_client *clp = NFS_SERVER(ino)->nfs_client; int status = 0; - /* Verify we got what we asked for. - * Note that because the xdr parsing only accepts a single - * element array, this can fail even if the server is behaving - * correctly. - */ - if (lgp->args.range.iomode > res->range.iomode || - res->range.offset != 0 || - res->range.length != NFS4_MAX_UINT64) { - status = -EINVAL; - goto out; - } /* Inject layout blob into I/O device driver */ lseg = NFS_SERVER(ino)->pnfs_curr_ld->alloc_lseg(lo, res, lgp->gfp_flags); if (!lseg || IS_ERR(lseg)) { @@ -903,9 +980,14 @@ static int pnfs_read_pg_test(struct nfs_pageio_descriptor *pgio, /* This is first coelesce call for a series of nfs_pages */ pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode, prev->wb_context, + req_offset(req), + pgio->pg_count, IOMODE_READ, GFP_KERNEL); - } + } else if (pgio->pg_lseg && + req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset, + pgio->pg_lseg->pls_range.length)) + return 0; return NFS_SERVER(pgio->pg_inode)->pnfs_curr_ld->pg_test(pgio, prev, req); } @@ -926,9 +1008,14 @@ static int pnfs_write_pg_test(struct nfs_pageio_descriptor *pgio, /* This is first coelesce call for a series of nfs_pages */ pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode, prev->wb_context, + req_offset(req), + pgio->pg_count, IOMODE_RW, GFP_NOFS); - } + } else if (pgio->pg_lseg && + req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset, + pgio->pg_lseg->pls_range.length)) + return 0; return NFS_SERVER(pgio->pg_inode)->pnfs_curr_ld->pg_test(pgio, prev, req); } diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 5b083d295334..78f8a4a171b3 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -131,7 +131,8 @@ void get_layout_hdr(struct pnfs_layout_hdr *lo); void put_lseg(struct pnfs_layout_segment *lseg); struct pnfs_layout_segment * pnfs_update_layout(struct inode *ino, struct nfs_open_context *ctx, - enum pnfs_iomode access_type, gfp_t gfp_flags); + loff_t pos, u64 count, enum pnfs_iomode access_type, + gfp_t gfp_flags); void set_pnfs_layoutdriver(struct nfs_server *, u32 id); void unset_pnfs_layoutdriver(struct nfs_server *); enum pnfs_try_status pnfs_try_to_write_data(struct nfs_write_data *, @@ -271,7 +272,8 @@ static inline void put_lseg(struct pnfs_layout_segment *lseg) static inline struct pnfs_layout_segment * pnfs_update_layout(struct inode *ino, struct nfs_open_context *ctx, - enum pnfs_iomode access_type, gfp_t gfp_flags) + loff_t pos, u64 count, enum pnfs_iomode access_type, + gfp_t gfp_flags) { return NULL; } diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 2bcf0dc306a1..540c8bc93f95 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -288,7 +288,9 @@ static int nfs_pagein_multi(struct nfs_pageio_descriptor *desc) atomic_set(&req->wb_complete, requests); BUG_ON(desc->pg_lseg != NULL); - lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_READ, GFP_KERNEL); + lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, + req_offset(req), desc->pg_count, + IOMODE_READ, GFP_KERNEL); ClearPageError(page); offset = 0; nbytes = desc->pg_count; @@ -351,7 +353,9 @@ static int nfs_pagein_one(struct nfs_pageio_descriptor *desc) } req = nfs_list_entry(data->pages.next); if ((!lseg) && list_is_singular(&data->pages)) - lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_READ, GFP_KERNEL); + lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, + req_offset(req), desc->pg_count, + IOMODE_READ, GFP_KERNEL); ret = nfs_read_rpcsetup(req, data, &nfs_read_full_ops, desc->pg_count, 0, lseg); diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 49c715b4ac92..7edb72f27c22 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -939,7 +939,9 @@ static int nfs_flush_multi(struct nfs_pageio_descriptor *desc) atomic_set(&req->wb_complete, requests); BUG_ON(desc->pg_lseg); - lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_RW, GFP_NOFS); + lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, + req_offset(req), desc->pg_count, + IOMODE_RW, GFP_NOFS); ClearPageError(page); offset = 0; nbytes = desc->pg_count; @@ -1013,7 +1015,9 @@ static int nfs_flush_one(struct nfs_pageio_descriptor *desc) } req = nfs_list_entry(data->pages.next); if ((!lseg) && list_is_singular(&data->pages)) - lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, IOMODE_RW, GFP_NOFS); + lseg = pnfs_update_layout(desc->pg_inode, req->wb_context, + req_offset(req), desc->pg_count, + IOMODE_RW, GFP_NOFS); if ((desc->pg_ioflags & FLUSH_COND_STABLE) && (desc->pg_moreio || NFS_I(desc->pg_inode)->ncommit)) -- cgit v1.2.3 From 707ed5fdb587c71fdb7ad224ba1d80231f33c974 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 22 May 2011 19:47:46 +0300 Subject: pnfs: align layoutget requests on page boundaries Signed-off-by: Benny Halevy --- fs/nfs/pnfs.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index c2f09e9b670e..2357ee343f4a 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -850,6 +850,7 @@ pnfs_update_layout(struct inode *ino, .offset = pos, .length = count, }; + unsigned pg_offset; struct nfs_inode *nfsi = NFS_I(ino); struct nfs_client *clp = NFS_SERVER(ino)->nfs_client; struct pnfs_layout_hdr *lo; @@ -899,6 +900,13 @@ pnfs_update_layout(struct inode *ino, spin_unlock(&clp->cl_lock); } + pg_offset = arg.offset & ~PAGE_CACHE_MASK; + if (pg_offset) { + arg.offset -= pg_offset; + arg.length += pg_offset; + } + arg.length = PAGE_CACHE_ALIGN(arg.length); + lseg = send_layoutget(lo, ctx, &arg, gfp_flags); if (!lseg && first) { spin_lock(&clp->cl_lock); -- cgit v1.2.3 From 778b5502fdba5b183553f3f2ef1672ba78ac58b6 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 22 May 2011 19:48:02 +0300 Subject: pnfs: Use byte-range for cb_layoutrecall Use recalled range to invalidate particular layout segments in the layout cache. Signed-off-by: Benny Halevy --- fs/nfs/callback_proc.c | 4 ++-- fs/nfs/pnfs.c | 15 +++++++++------ fs/nfs/pnfs.h | 2 +- 3 files changed, 12 insertions(+), 9 deletions(-) diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c index c73e7b2fb8e2..d4d1954e9bb9 100644 --- a/fs/nfs/callback_proc.c +++ b/fs/nfs/callback_proc.c @@ -139,7 +139,7 @@ static u32 initiate_file_draining(struct nfs_client *clp, spin_lock(&ino->i_lock); if (test_bit(NFS_LAYOUT_BULK_RECALL, &lo->plh_flags) || mark_matching_lsegs_invalid(lo, &free_me_list, - args->cbl_range.iomode)) + &args->cbl_range)) rv = NFS4ERR_DELAY; else rv = NFS4ERR_NOMATCHING_LAYOUT; @@ -184,7 +184,7 @@ static u32 initiate_bulk_draining(struct nfs_client *clp, ino = lo->plh_inode; spin_lock(&ino->i_lock); set_bit(NFS_LAYOUT_BULK_RECALL, &lo->plh_flags); - if (mark_matching_lsegs_invalid(lo, &free_me_list, range.iomode)) + if (mark_matching_lsegs_invalid(lo, &free_me_list, &range)) rv = NFS4ERR_DELAY; list_del_init(&lo->plh_bulk_recall); spin_unlock(&ino->i_lock); diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 2357ee343f4a..20436a5e76cd 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -321,10 +321,12 @@ lo_seg_intersecting(struct pnfs_layout_range *l1, } static bool -should_free_lseg(u32 lseg_iomode, u32 recall_iomode) +should_free_lseg(struct pnfs_layout_range *lseg_range, + struct pnfs_layout_range *recall_range) { - return (recall_iomode == IOMODE_ANY || - lseg_iomode == recall_iomode); + return (recall_range->iomode == IOMODE_ANY || + lseg_range->iomode == recall_range->iomode) && + lo_seg_intersecting(lseg_range, recall_range); } /* Returns 1 if lseg is removed from list, 0 otherwise */ @@ -355,7 +357,7 @@ static int mark_lseg_invalid(struct pnfs_layout_segment *lseg, int mark_matching_lsegs_invalid(struct pnfs_layout_hdr *lo, struct list_head *tmp_list, - u32 iomode) + struct pnfs_layout_range *recall_range) { struct pnfs_layout_segment *lseg, *next; int invalid = 0, removed = 0; @@ -368,7 +370,8 @@ mark_matching_lsegs_invalid(struct pnfs_layout_hdr *lo, return 0; } list_for_each_entry_safe(lseg, next, &lo->plh_segs, pls_list) - if (should_free_lseg(lseg->pls_range.iomode, iomode)) { + if (!recall_range || + should_free_lseg(&lseg->pls_range, recall_range)) { dprintk("%s: freeing lseg %p iomode %d " "offset %llu length %llu\n", __func__, lseg, lseg->pls_range.iomode, lseg->pls_range.offset, @@ -417,7 +420,7 @@ pnfs_destroy_layout(struct nfs_inode *nfsi) lo = nfsi->layout; if (lo) { lo->plh_block_lgets++; /* permanently block new LAYOUTGETs */ - mark_matching_lsegs_invalid(lo, &tmp_list, IOMODE_ANY); + mark_matching_lsegs_invalid(lo, &tmp_list, NULL); } spin_unlock(&nfsi->vfs_inode.i_lock); pnfs_free_lseg_list(&tmp_list); diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 78f8a4a171b3..f37ab3539cbf 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -154,7 +154,7 @@ int pnfs_choose_layoutget_stateid(nfs4_stateid *dst, struct nfs4_state *open_state); int mark_matching_lsegs_invalid(struct pnfs_layout_hdr *lo, struct list_head *tmp_list, - u32 iomode); + struct pnfs_layout_range *recall_range); bool pnfs_roc(struct inode *ino); void pnfs_roc_release(struct inode *ino); void pnfs_roc_set_barrier(struct inode *ino, u32 barrier); -- cgit v1.2.3 From ae50c0b5c6f6fa340f1fe2d244b358145f7e5a15 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Sun, 22 May 2011 19:48:21 +0300 Subject: pnfs: client stats A pNFS client auto-negotiates a lot of features (minorversion level, pNFS layout type, etc.). This is convenient, but makes certain kinds of failures hard for a user to detect. For example, if the client falls back on 4.0, or falls back to MDS IO because the user didn't connect to the right iscsi disks before mounting, the only symptoms may be reduced performance, which may not be noticed till long after the actual failure, and may be difficult for a user to diagnose. However, such "failures" may also be perfectly normal in some cases, so we don't want to spam the system logs with them. One approach would be to put some more information into /proc/self/mountstats. Signed-off-by: J. Bruce Fields Signed-off-by: Benny Halevy [pnfs: add commit client stats] [fixup data types for "ret" variables in pnfs_try_to* inline funcs.] Signed-off-by: Benny Halevy [fix definition of show_pnfs for !CONFIG_PNFS] Signed-off-by: Benny Halevy [nfs41: Fix show_sessions in the not CONFIG_NFS_V4_1 case] There is a build error when CONFIG_NFS_V4 is set but CONFIG_NFS_V4_1 is *not* set. show_sessions() prototype was unbalanced between the two cases. Signed-off-by: Boaz Harrosh [pnfs: super.c remove CONFIG_PNFS] Signed-off-by: Andy Adamson Signed-off-by: Benny Halevy --- fs/nfs/super.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index e288f06d3fa7..ce40e5c568ba 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -63,6 +63,7 @@ #include "iostat.h" #include "internal.h" #include "fscache.h" +#include "pnfs.h" #define NFSDBG_FACILITY NFSDBG_VFS @@ -732,6 +733,28 @@ static int nfs_show_options(struct seq_file *m, struct vfsmount *mnt) return 0; } +#ifdef CONFIG_NFS_V4_1 +void show_sessions(struct seq_file *m, struct nfs_server *server) +{ + if (nfs4_has_session(server->nfs_client)) + seq_printf(m, ",sessions"); +} +#else +void show_sessions(struct seq_file *m, struct nfs_server *server) {} +#endif + +#ifdef CONFIG_NFS_V4_1 +void show_pnfs(struct seq_file *m, struct nfs_server *server) +{ + seq_printf(m, ",pnfs="); + if (server->pnfs_curr_ld) + seq_printf(m, "%s", server->pnfs_curr_ld->name); + else + seq_printf(m, "not configured"); +} +#else /* CONFIG_NFS_V4_1 */ +void show_pnfs(struct seq_file *m, struct nfs_server *server) {} +#endif /* CONFIG_NFS_V4_1 */ static int nfs_show_devname(struct seq_file *m, struct vfsmount *mnt) { @@ -792,6 +815,8 @@ static int nfs_show_stats(struct seq_file *m, struct vfsmount *mnt) seq_printf(m, "bm0=0x%x", nfss->attr_bitmask[0]); seq_printf(m, ",bm1=0x%x", nfss->attr_bitmask[1]); seq_printf(m, ",acl=0x%x", nfss->acl_bitmask); + show_sessions(m, nfss); + show_pnfs(m, nfss); } #endif -- cgit v1.2.3 From c93407d03c3ccf60b33a309e5fcd41cd98969901 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 22 May 2011 19:49:06 +0300 Subject: pnfs-obj: objlayoutdriver module skeleton * Define the PNFS_OBJLAYOUT Kconfig option in the nfs master Kconfig file. * Add the objlayout driver to the Kernel's Kbuild system. * Add the fs/nfs/objlayout/Kbuild file for building the objlayoutdriver.ko driver * Define fs/nfs/objlayout/objio_osd.c, register the driver on module initialization and unregister on exit. [pnfs-obj: remove of CONFIG_PNFS fallout] Signed-off-by: Boaz Harrosh [added "unsure" clause] [depend on NFS_V4_1] Signed-off-by: Benny Halevy --- fs/nfs/Kconfig | 10 ++++++ fs/nfs/Makefile | 2 ++ fs/nfs/objlayout/Kbuild | 5 +++ fs/nfs/objlayout/objio_osd.c | 76 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 93 insertions(+) create mode 100644 fs/nfs/objlayout/Kbuild create mode 100644 fs/nfs/objlayout/objio_osd.c diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig index ba306658a6db..81515545ba75 100644 --- a/fs/nfs/Kconfig +++ b/fs/nfs/Kconfig @@ -87,6 +87,16 @@ config NFS_V4_1 config PNFS_FILE_LAYOUT tristate +config PNFS_OBJLAYOUT + tristate "Provide support for the pNFS Objects Layout Driver for NFSv4.1 pNFS (EXPERIMENTAL)" + depends on NFS_FS && NFS_V4_1 && SCSI_OSD_ULD + help + Say M here if you want your pNFS client to support the Objects Layout Driver. + Requires the SCSI osd initiator library (SCSI_OSD_INITIATOR) and + upper level driver (SCSI_OSD_ULD). + + If unsure, say N. + config ROOT_NFS bool "Root file system on NFS" depends on NFS_FS=y && IP_PNP diff --git a/fs/nfs/Makefile b/fs/nfs/Makefile index 7516a8aaa42e..6a34f7dd0e6f 100644 --- a/fs/nfs/Makefile +++ b/fs/nfs/Makefile @@ -21,3 +21,5 @@ nfs-$(CONFIG_NFS_FSCACHE) += fscache.o fscache-index.o obj-$(CONFIG_PNFS_FILE_LAYOUT) += nfs_layout_nfsv41_files.o nfs_layout_nfsv41_files-y := nfs4filelayout.o nfs4filelayoutdev.o + +obj-$(CONFIG_PNFS_OBJLAYOUT) += objlayout/ diff --git a/fs/nfs/objlayout/Kbuild b/fs/nfs/objlayout/Kbuild new file mode 100644 index 000000000000..2e5b9a44773c --- /dev/null +++ b/fs/nfs/objlayout/Kbuild @@ -0,0 +1,5 @@ +# +# Makefile for the pNFS Objects Layout Driver kernel module +# +objlayoutdriver-y := objio_osd.o +obj-$(CONFIG_PNFS_OBJLAYOUT) += objlayoutdriver.o diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c new file mode 100644 index 000000000000..379595f2d1cc --- /dev/null +++ b/fs/nfs/objlayout/objio_osd.c @@ -0,0 +1,76 @@ +/* + * pNFS Objects layout implementation over open-osd initiator library + * + * Copyright (C) 2009 Panasas Inc. [year of first publication] + * All rights reserved. + * + * Benny Halevy + * Boaz Harrosh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * See the file COPYING included with this distribution for more details. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Panasas company nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include "../pnfs.h" + +static struct pnfs_layoutdriver_type objlayout_type = { + .id = LAYOUT_OSD2_OBJECTS, + .name = "LAYOUT_OSD2_OBJECTS", +}; + +MODULE_DESCRIPTION("pNFS Layout Driver for OSD2 objects"); +MODULE_AUTHOR("Benny Halevy "); +MODULE_LICENSE("GPL"); + +static int __init +objlayout_init(void) +{ + int ret = pnfs_register_layoutdriver(&objlayout_type); + + if (ret) + printk(KERN_INFO + "%s: Registering OSD pNFS Layout Driver failed: error=%d\n", + __func__, ret); + else + printk(KERN_INFO "%s: Registered OSD pNFS Layout Driver\n", + __func__); + return ret; +} + +static void __exit +objlayout_exit(void) +{ + pnfs_unregister_layoutdriver(&objlayout_type); + printk(KERN_INFO "%s: Unregistered OSD pNFS Layout Driver\n", + __func__); +} + +module_init(objlayout_init); +module_exit(objlayout_exit); -- cgit v1.2.3 From 38b7c401f6ade50543f246c4bc2c971edf2b19dd Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 22 May 2011 19:49:32 +0300 Subject: pnfs-obj: pnfs_osd XDR definitions * Add the pnfs_osd_xdr.h header * defintions the pnfs_osd_layout structure including all it's sub-types and constants. * Declare the pnfs_osd_xdr_decode_layout API + all needed inline helpers. * Define the pnfs_osd_deviceaddr structure and all its subtypes and constants. * Declare API for decoding of a pnfs_osd_deviceaddr from XDR stream. * Define the pnfs_osd_ioerr structure, its substructures and constants. * Declare API for encoding of a pnfs_osd_ioerr into XDR stream. * Define the pnfs_osd_layoutupdate structure and its substructures. * Declare API for encoding of a pnfs_osd_layoutupdate into XDR stream. [Remove server definitions] Signed-off-by: Boaz Harrosh Signed-off-by: Benny Halevy --- include/linux/pnfs_osd_xdr.h | 345 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 345 insertions(+) create mode 100644 include/linux/pnfs_osd_xdr.h diff --git a/include/linux/pnfs_osd_xdr.h b/include/linux/pnfs_osd_xdr.h new file mode 100644 index 000000000000..76efbdd01622 --- /dev/null +++ b/include/linux/pnfs_osd_xdr.h @@ -0,0 +1,345 @@ +/* + * pNFS-osd on-the-wire data structures + * + * Copyright (C) 2007 Panasas Inc. [year of first publication] + * All rights reserved. + * + * Benny Halevy + * Boaz Harrosh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * See the file COPYING included with this distribution for more details. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Panasas company nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef __PNFS_OSD_XDR_H__ +#define __PNFS_OSD_XDR_H__ + +#include +#include +#include + +#define PNFS_OSD_OSDNAME_MAXSIZE 256 + +/* + * draft-ietf-nfsv4-minorversion-22 + * draft-ietf-nfsv4-pnfs-obj-12 + */ + +/* Layout Structure */ + +enum pnfs_osd_raid_algorithm4 { + PNFS_OSD_RAID_0 = 1, + PNFS_OSD_RAID_4 = 2, + PNFS_OSD_RAID_5 = 3, + PNFS_OSD_RAID_PQ = 4 /* Reed-Solomon P+Q */ +}; + +/* struct pnfs_osd_data_map4 { + * uint32_t odm_num_comps; + * length4 odm_stripe_unit; + * uint32_t odm_group_width; + * uint32_t odm_group_depth; + * uint32_t odm_mirror_cnt; + * pnfs_osd_raid_algorithm4 odm_raid_algorithm; + * }; + */ +struct pnfs_osd_data_map { + u32 odm_num_comps; + u64 odm_stripe_unit; + u32 odm_group_width; + u32 odm_group_depth; + u32 odm_mirror_cnt; + u32 odm_raid_algorithm; +}; + +/* struct pnfs_osd_objid4 { + * deviceid4 oid_device_id; + * uint64_t oid_partition_id; + * uint64_t oid_object_id; + * }; + */ +struct pnfs_osd_objid { + struct nfs4_deviceid oid_device_id; + u64 oid_partition_id; + u64 oid_object_id; +}; + +/* For printout. I use: + * kprint("dev(%llx:%llx)", _DEVID_LO(pointer), _DEVID_HI(pointer)); + * BE style + */ +#define _DEVID_LO(oid_device_id) \ + (unsigned long long)be64_to_cpup((__be64 *)(oid_device_id)->data) + +#define _DEVID_HI(oid_device_id) \ + (unsigned long long)be64_to_cpup(((__be64 *)(oid_device_id)->data) + 1) + +static inline int +pnfs_osd_objid_xdr_sz(void) +{ + return (NFS4_DEVICEID4_SIZE / 4) + 2 + 2; +} + +enum pnfs_osd_version { + PNFS_OSD_MISSING = 0, + PNFS_OSD_VERSION_1 = 1, + PNFS_OSD_VERSION_2 = 2 +}; + +struct pnfs_osd_opaque_cred { + u32 cred_len; + void *cred; +}; + +enum pnfs_osd_cap_key_sec { + PNFS_OSD_CAP_KEY_SEC_NONE = 0, + PNFS_OSD_CAP_KEY_SEC_SSV = 1, +}; + +/* struct pnfs_osd_object_cred4 { + * pnfs_osd_objid4 oc_object_id; + * pnfs_osd_version4 oc_osd_version; + * pnfs_osd_cap_key_sec4 oc_cap_key_sec; + * opaque oc_capability_key<>; + * opaque oc_capability<>; + * }; + */ +struct pnfs_osd_object_cred { + struct pnfs_osd_objid oc_object_id; + u32 oc_osd_version; + u32 oc_cap_key_sec; + struct pnfs_osd_opaque_cred oc_cap_key; + struct pnfs_osd_opaque_cred oc_cap; +}; + +/* struct pnfs_osd_layout4 { + * pnfs_osd_data_map4 olo_map; + * uint32_t olo_comps_index; + * pnfs_osd_object_cred4 olo_components<>; + * }; + */ +struct pnfs_osd_layout { + struct pnfs_osd_data_map olo_map; + u32 olo_comps_index; + u32 olo_num_comps; + struct pnfs_osd_object_cred *olo_comps; +}; + +/* Device Address */ +enum pnfs_osd_targetid_type { + OBJ_TARGET_ANON = 1, + OBJ_TARGET_SCSI_NAME = 2, + OBJ_TARGET_SCSI_DEVICE_ID = 3, +}; + +/* union pnfs_osd_targetid4 switch (pnfs_osd_targetid_type4 oti_type) { + * case OBJ_TARGET_SCSI_NAME: + * string oti_scsi_name<>; + * + * case OBJ_TARGET_SCSI_DEVICE_ID: + * opaque oti_scsi_device_id<>; + * + * default: + * void; + * }; + * + * union pnfs_osd_targetaddr4 switch (bool ota_available) { + * case TRUE: + * netaddr4 ota_netaddr; + * case FALSE: + * void; + * }; + * + * struct pnfs_osd_deviceaddr4 { + * pnfs_osd_targetid4 oda_targetid; + * pnfs_osd_targetaddr4 oda_targetaddr; + * uint64_t oda_lun; + * opaque oda_systemid<>; + * pnfs_osd_object_cred4 oda_root_obj_cred; + * opaque oda_osdname<>; + * }; + */ +struct pnfs_osd_targetid { + u32 oti_type; + struct nfs4_string oti_scsi_device_id; +}; + +enum { PNFS_OSD_TARGETID_MAX = 1 + PNFS_OSD_OSDNAME_MAXSIZE / 4 }; + +/* struct netaddr4 { + * // see struct rpcb in RFC1833 + * string r_netid<>; // network id + * string r_addr<>; // universal address + * }; + */ +struct pnfs_osd_net_addr { + struct nfs4_string r_netid; + struct nfs4_string r_addr; +}; + +struct pnfs_osd_targetaddr { + u32 ota_available; + struct pnfs_osd_net_addr ota_netaddr; +}; + +enum { + NETWORK_ID_MAX = 16 / 4, + UNIVERSAL_ADDRESS_MAX = 64 / 4, + PNFS_OSD_TARGETADDR_MAX = 3 + NETWORK_ID_MAX + UNIVERSAL_ADDRESS_MAX, +}; + +struct pnfs_osd_deviceaddr { + struct pnfs_osd_targetid oda_targetid; + struct pnfs_osd_targetaddr oda_targetaddr; + u8 oda_lun[8]; + struct nfs4_string oda_systemid; + struct pnfs_osd_object_cred oda_root_obj_cred; + struct nfs4_string oda_osdname; +}; + +enum { + ODA_OSDNAME_MAX = PNFS_OSD_OSDNAME_MAXSIZE / 4, + PNFS_OSD_DEVICEADDR_MAX = + PNFS_OSD_TARGETID_MAX + PNFS_OSD_TARGETADDR_MAX + + 2 /*oda_lun*/ + + 1 + OSD_SYSTEMID_LEN + + 1 + ODA_OSDNAME_MAX, +}; + +/* LAYOUTCOMMIT: layoutupdate */ + +/* union pnfs_osd_deltaspaceused4 switch (bool dsu_valid) { + * case TRUE: + * int64_t dsu_delta; + * case FALSE: + * void; + * }; + * + * struct pnfs_osd_layoutupdate4 { + * pnfs_osd_deltaspaceused4 olu_delta_space_used; + * bool olu_ioerr_flag; + * }; + */ +struct pnfs_osd_layoutupdate { + u32 dsu_valid; + s64 dsu_delta; + u32 olu_ioerr_flag; +}; + +/* LAYOUTRETURN: I/O Rrror Report */ + +enum pnfs_osd_errno { + PNFS_OSD_ERR_EIO = 1, + PNFS_OSD_ERR_NOT_FOUND = 2, + PNFS_OSD_ERR_NO_SPACE = 3, + PNFS_OSD_ERR_BAD_CRED = 4, + PNFS_OSD_ERR_NO_ACCESS = 5, + PNFS_OSD_ERR_UNREACHABLE = 6, + PNFS_OSD_ERR_RESOURCE = 7 +}; + +/* struct pnfs_osd_ioerr4 { + * pnfs_osd_objid4 oer_component; + * length4 oer_comp_offset; + * length4 oer_comp_length; + * bool oer_iswrite; + * pnfs_osd_errno4 oer_errno; + * }; + */ +struct pnfs_osd_ioerr { + struct pnfs_osd_objid oer_component; + u64 oer_comp_offset; + u64 oer_comp_length; + u32 oer_iswrite; + u32 oer_errno; +}; + +/* OSD XDR API */ +/* Layout helpers */ +/* Layout decoding is done in two parts: + * 1. First Call pnfs_osd_xdr_decode_layout_map to read in only the header part + * of the layout. @iter members need not be initialized. + * Returned: + * @layout members are set. (@layout->olo_comps set to NULL). + * + * Zero on success, or negative error if passed xdr is broken. + * + * 2. 2nd Call pnfs_osd_xdr_decode_layout_comp() in a loop until it returns + * false, to decode the next component. + * Returned: + * true if there is more to decode or false if we are done or error. + * + * Example: + * struct pnfs_osd_xdr_decode_layout_iter iter; + * struct pnfs_osd_layout layout; + * struct pnfs_osd_object_cred comp; + * int status; + * + * status = pnfs_osd_xdr_decode_layout_map(&layout, &iter, xdr); + * if (unlikely(status)) + * goto err; + * while(pnfs_osd_xdr_decode_layout_comp(&comp, &iter, xdr, &status)) { + * // All of @comp strings point to inside the xdr_buffer + * // or scrach buffer. Copy them out to user memory eg. + * copy_single_comp(dest_comp++, &comp); + * } + * if (unlikely(status)) + * goto err; + */ + +struct pnfs_osd_xdr_decode_layout_iter { + unsigned total_comps; + unsigned decoded_comps; +}; + +extern int pnfs_osd_xdr_decode_layout_map(struct pnfs_osd_layout *layout, + struct pnfs_osd_xdr_decode_layout_iter *iter, struct xdr_stream *xdr); + +extern bool pnfs_osd_xdr_decode_layout_comp(struct pnfs_osd_object_cred *comp, + struct pnfs_osd_xdr_decode_layout_iter *iter, struct xdr_stream *xdr, + int *err); + +/* Device Info helpers */ + +/* Note: All strings inside @deviceaddr point to space inside @p. + * @p should stay valid while @deviceaddr is in use. + */ +extern void pnfs_osd_xdr_decode_deviceaddr( + struct pnfs_osd_deviceaddr *deviceaddr, __be32 *p); + +/* layoutupdate (layout_commit) xdr helpers */ +extern int +pnfs_osd_xdr_encode_layoutupdate(struct xdr_stream *xdr, + struct pnfs_osd_layoutupdate *lou); + +/* osd_ioerror encoding/decoding (layout_return) */ +/* Client */ +extern __be32 *pnfs_osd_xdr_ioerr_reserve_space(struct xdr_stream *xdr); +extern void pnfs_osd_xdr_encode_ioerr(__be32 *p, struct pnfs_osd_ioerr *ioerr); + +#endif /* __PNFS_OSD_XDR_H__ */ -- cgit v1.2.3 From f1bc893a89d012649e4e7f43575b2c290e08ee42 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 22 May 2011 19:49:57 +0300 Subject: pnfs-obj: pnfs_osd XDR client implementation * Add the fs/nfs/objlayout/pnfs_osd_xdr_cli.c file, which will include the XDR encode/decode implementations for the pNFS client objlayout driver. [Wrong type in comments] Signed-off-by: Boaz Harrosh Signed-off-by: Benny Halevy --- fs/nfs/objlayout/Kbuild | 2 +- fs/nfs/objlayout/pnfs_osd_xdr_cli.c | 412 ++++++++++++++++++++++++++++++++++++ 2 files changed, 413 insertions(+), 1 deletion(-) create mode 100644 fs/nfs/objlayout/pnfs_osd_xdr_cli.c diff --git a/fs/nfs/objlayout/Kbuild b/fs/nfs/objlayout/Kbuild index 2e5b9a44773c..7b2a5a240657 100644 --- a/fs/nfs/objlayout/Kbuild +++ b/fs/nfs/objlayout/Kbuild @@ -1,5 +1,5 @@ # # Makefile for the pNFS Objects Layout Driver kernel module # -objlayoutdriver-y := objio_osd.o +objlayoutdriver-y := objio_osd.o pnfs_osd_xdr_cli.o obj-$(CONFIG_PNFS_OBJLAYOUT) += objlayoutdriver.o diff --git a/fs/nfs/objlayout/pnfs_osd_xdr_cli.c b/fs/nfs/objlayout/pnfs_osd_xdr_cli.c new file mode 100644 index 000000000000..16fc758e9123 --- /dev/null +++ b/fs/nfs/objlayout/pnfs_osd_xdr_cli.c @@ -0,0 +1,412 @@ +/* + * Object-Based pNFS Layout XDR layer + * + * Copyright (C) 2007 Panasas Inc. [year of first publication] + * All rights reserved. + * + * Benny Halevy + * Boaz Harrosh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * See the file COPYING included with this distribution for more details. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Panasas company nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include + +#define NFSDBG_FACILITY NFSDBG_PNFS_LD + +/* + * The following implementation is based on RFC5664 + */ + +/* + * struct pnfs_osd_objid { + * struct nfs4_deviceid oid_device_id; + * u64 oid_partition_id; + * u64 oid_object_id; + * }; // xdr size 32 bytes + */ +static __be32 * +_osd_xdr_decode_objid(__be32 *p, struct pnfs_osd_objid *objid) +{ + p = xdr_decode_opaque_fixed(p, objid->oid_device_id.data, + sizeof(objid->oid_device_id.data)); + + p = xdr_decode_hyper(p, &objid->oid_partition_id); + p = xdr_decode_hyper(p, &objid->oid_object_id); + return p; +} +/* + * struct pnfs_osd_opaque_cred { + * u32 cred_len; + * void *cred; + * }; // xdr size [variable] + * The return pointers are from the xdr buffer + */ +static int +_osd_xdr_decode_opaque_cred(struct pnfs_osd_opaque_cred *opaque_cred, + struct xdr_stream *xdr) +{ + __be32 *p = xdr_inline_decode(xdr, 1); + + if (!p) + return -EINVAL; + + opaque_cred->cred_len = be32_to_cpu(*p++); + + p = xdr_inline_decode(xdr, opaque_cred->cred_len); + if (!p) + return -EINVAL; + + opaque_cred->cred = p; + return 0; +} + +/* + * struct pnfs_osd_object_cred { + * struct pnfs_osd_objid oc_object_id; + * u32 oc_osd_version; + * u32 oc_cap_key_sec; + * struct pnfs_osd_opaque_cred oc_cap_key + * struct pnfs_osd_opaque_cred oc_cap; + * }; // xdr size 32 + 4 + 4 + [variable] + [variable] + */ +static int +_osd_xdr_decode_object_cred(struct pnfs_osd_object_cred *comp, + struct xdr_stream *xdr) +{ + __be32 *p = xdr_inline_decode(xdr, 32 + 4 + 4); + int ret; + + if (!p) + return -EIO; + + p = _osd_xdr_decode_objid(p, &comp->oc_object_id); + comp->oc_osd_version = be32_to_cpup(p++); + comp->oc_cap_key_sec = be32_to_cpup(p); + + ret = _osd_xdr_decode_opaque_cred(&comp->oc_cap_key, xdr); + if (unlikely(ret)) + return ret; + + ret = _osd_xdr_decode_opaque_cred(&comp->oc_cap, xdr); + return ret; +} + +/* + * struct pnfs_osd_data_map { + * u32 odm_num_comps; + * u64 odm_stripe_unit; + * u32 odm_group_width; + * u32 odm_group_depth; + * u32 odm_mirror_cnt; + * u32 odm_raid_algorithm; + * }; // xdr size 4 + 8 + 4 + 4 + 4 + 4 + */ +static inline int +_osd_data_map_xdr_sz(void) +{ + return 4 + 8 + 4 + 4 + 4 + 4; +} + +static __be32 * +_osd_xdr_decode_data_map(__be32 *p, struct pnfs_osd_data_map *data_map) +{ + data_map->odm_num_comps = be32_to_cpup(p++); + p = xdr_decode_hyper(p, &data_map->odm_stripe_unit); + data_map->odm_group_width = be32_to_cpup(p++); + data_map->odm_group_depth = be32_to_cpup(p++); + data_map->odm_mirror_cnt = be32_to_cpup(p++); + data_map->odm_raid_algorithm = be32_to_cpup(p++); + dprintk("%s: odm_num_comps=%u odm_stripe_unit=%llu odm_group_width=%u " + "odm_group_depth=%u odm_mirror_cnt=%u odm_raid_algorithm=%u\n", + __func__, + data_map->odm_num_comps, + (unsigned long long)data_map->odm_stripe_unit, + data_map->odm_group_width, + data_map->odm_group_depth, + data_map->odm_mirror_cnt, + data_map->odm_raid_algorithm); + return p; +} + +int pnfs_osd_xdr_decode_layout_map(struct pnfs_osd_layout *layout, + struct pnfs_osd_xdr_decode_layout_iter *iter, struct xdr_stream *xdr) +{ + __be32 *p; + + memset(iter, 0, sizeof(*iter)); + + p = xdr_inline_decode(xdr, _osd_data_map_xdr_sz() + 4 + 4); + if (unlikely(!p)) + return -EINVAL; + + p = _osd_xdr_decode_data_map(p, &layout->olo_map); + layout->olo_comps_index = be32_to_cpup(p++); + layout->olo_num_comps = be32_to_cpup(p++); + iter->total_comps = layout->olo_num_comps; + return 0; +} + +bool pnfs_osd_xdr_decode_layout_comp(struct pnfs_osd_object_cred *comp, + struct pnfs_osd_xdr_decode_layout_iter *iter, struct xdr_stream *xdr, + int *err) +{ + BUG_ON(iter->decoded_comps > iter->total_comps); + if (iter->decoded_comps == iter->total_comps) + return false; + + *err = _osd_xdr_decode_object_cred(comp, xdr); + if (unlikely(*err)) { + dprintk("%s: _osd_xdr_decode_object_cred=>%d decoded_comps=%d " + "total_comps=%d\n", __func__, *err, + iter->decoded_comps, iter->total_comps); + return false; /* stop the loop */ + } + dprintk("%s: dev(%llx:%llx) par=0x%llx obj=0x%llx " + "key_len=%u cap_len=%u\n", + __func__, + _DEVID_LO(&comp->oc_object_id.oid_device_id), + _DEVID_HI(&comp->oc_object_id.oid_device_id), + comp->oc_object_id.oid_partition_id, + comp->oc_object_id.oid_object_id, + comp->oc_cap_key.cred_len, comp->oc_cap.cred_len); + + iter->decoded_comps++; + return true; +} + +/* + * Get Device Information Decoding + * + * Note: since Device Information is currently done synchronously, all + * variable strings fields are left inside the rpc buffer and are only + * pointed to by the pnfs_osd_deviceaddr members. So the read buffer + * should not be freed while the returned information is in use. + */ +/* + *struct nfs4_string { + * unsigned int len; + * char *data; + *}; // size [variable] + * NOTE: Returned string points to inside the XDR buffer + */ +static __be32 * +__read_u8_opaque(__be32 *p, struct nfs4_string *str) +{ + str->len = be32_to_cpup(p++); + str->data = (char *)p; + + p += XDR_QUADLEN(str->len); + return p; +} + +/* + * struct pnfs_osd_targetid { + * u32 oti_type; + * struct nfs4_string oti_scsi_device_id; + * };// size 4 + [variable] + */ +static __be32 * +__read_targetid(__be32 *p, struct pnfs_osd_targetid* targetid) +{ + u32 oti_type; + + oti_type = be32_to_cpup(p++); + targetid->oti_type = oti_type; + + switch (oti_type) { + case OBJ_TARGET_SCSI_NAME: + case OBJ_TARGET_SCSI_DEVICE_ID: + p = __read_u8_opaque(p, &targetid->oti_scsi_device_id); + } + + return p; +} + +/* + * struct pnfs_osd_net_addr { + * struct nfs4_string r_netid; + * struct nfs4_string r_addr; + * }; + */ +static __be32 * +__read_net_addr(__be32 *p, struct pnfs_osd_net_addr* netaddr) +{ + p = __read_u8_opaque(p, &netaddr->r_netid); + p = __read_u8_opaque(p, &netaddr->r_addr); + + return p; +} + +/* + * struct pnfs_osd_targetaddr { + * u32 ota_available; + * struct pnfs_osd_net_addr ota_netaddr; + * }; + */ +static __be32 * +__read_targetaddr(__be32 *p, struct pnfs_osd_targetaddr *targetaddr) +{ + u32 ota_available; + + ota_available = be32_to_cpup(p++); + targetaddr->ota_available = ota_available; + + if (ota_available) + p = __read_net_addr(p, &targetaddr->ota_netaddr); + + + return p; +} + +/* + * struct pnfs_osd_deviceaddr { + * struct pnfs_osd_targetid oda_targetid; + * struct pnfs_osd_targetaddr oda_targetaddr; + * u8 oda_lun[8]; + * struct nfs4_string oda_systemid; + * struct pnfs_osd_object_cred oda_root_obj_cred; + * struct nfs4_string oda_osdname; + * }; + */ + +/* We need this version for the pnfs_osd_xdr_decode_deviceaddr which does + * not have an xdr_stream + */ +static __be32 * +__read_opaque_cred(__be32 *p, + struct pnfs_osd_opaque_cred *opaque_cred) +{ + opaque_cred->cred_len = be32_to_cpu(*p++); + opaque_cred->cred = p; + return p + XDR_QUADLEN(opaque_cred->cred_len); +} + +static __be32 * +__read_object_cred(__be32 *p, struct pnfs_osd_object_cred *comp) +{ + p = _osd_xdr_decode_objid(p, &comp->oc_object_id); + comp->oc_osd_version = be32_to_cpup(p++); + comp->oc_cap_key_sec = be32_to_cpup(p++); + + p = __read_opaque_cred(p, &comp->oc_cap_key); + p = __read_opaque_cred(p, &comp->oc_cap); + return p; +} + +void pnfs_osd_xdr_decode_deviceaddr( + struct pnfs_osd_deviceaddr *deviceaddr, __be32 *p) +{ + p = __read_targetid(p, &deviceaddr->oda_targetid); + + p = __read_targetaddr(p, &deviceaddr->oda_targetaddr); + + p = xdr_decode_opaque_fixed(p, deviceaddr->oda_lun, + sizeof(deviceaddr->oda_lun)); + + p = __read_u8_opaque(p, &deviceaddr->oda_systemid); + + p = __read_object_cred(p, &deviceaddr->oda_root_obj_cred); + + p = __read_u8_opaque(p, &deviceaddr->oda_osdname); + + /* libosd likes this terminated in dbg. It's last, so no problems */ + deviceaddr->oda_osdname.data[deviceaddr->oda_osdname.len] = 0; +} + +/* + * struct pnfs_osd_layoutupdate { + * u32 dsu_valid; + * s64 dsu_delta; + * u32 olu_ioerr_flag; + * }; xdr size 4 + 8 + 4 + */ +int +pnfs_osd_xdr_encode_layoutupdate(struct xdr_stream *xdr, + struct pnfs_osd_layoutupdate *lou) +{ + __be32 *p = xdr_reserve_space(xdr, 4 + 8 + 4); + + if (!p) + return -E2BIG; + + *p++ = cpu_to_be32(lou->dsu_valid); + if (lou->dsu_valid) + p = xdr_encode_hyper(p, lou->dsu_delta); + *p++ = cpu_to_be32(lou->olu_ioerr_flag); + return 0; +} + +/* + * struct pnfs_osd_objid { + * struct nfs4_deviceid oid_device_id; + * u64 oid_partition_id; + * u64 oid_object_id; + * }; // xdr size 32 bytes + */ +static inline __be32 * +pnfs_osd_xdr_encode_objid(__be32 *p, struct pnfs_osd_objid *object_id) +{ + p = xdr_encode_opaque_fixed(p, &object_id->oid_device_id.data, + sizeof(object_id->oid_device_id.data)); + p = xdr_encode_hyper(p, object_id->oid_partition_id); + p = xdr_encode_hyper(p, object_id->oid_object_id); + + return p; +} + +/* + * struct pnfs_osd_ioerr { + * struct pnfs_osd_objid oer_component; + * u64 oer_comp_offset; + * u64 oer_comp_length; + * u32 oer_iswrite; + * u32 oer_errno; + * }; // xdr size 32 + 24 bytes + */ +void pnfs_osd_xdr_encode_ioerr(__be32 *p, struct pnfs_osd_ioerr *ioerr) +{ + p = pnfs_osd_xdr_encode_objid(p, &ioerr->oer_component); + p = xdr_encode_hyper(p, ioerr->oer_comp_offset); + p = xdr_encode_hyper(p, ioerr->oer_comp_length); + *p++ = cpu_to_be32(ioerr->oer_iswrite); + *p = cpu_to_be32(ioerr->oer_errno); +} + +__be32 *pnfs_osd_xdr_ioerr_reserve_space(struct xdr_stream *xdr) +{ + __be32 *p; + + p = xdr_reserve_space(xdr, 32 + 24); + if (unlikely(!p)) + dprintk("%s: out of xdr space\n", __func__); + + return p; +} -- cgit v1.2.3 From 09f5bf4e6d0607399c16ec7a2d8d166f31086686 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 22 May 2011 19:50:20 +0300 Subject: pnfs-obj: decode layout, alloc/free lseg objlayout_alloc_lseg prepares an xdr_stream and calls the raid engins objio_alloc_lseg() to allocate a private pnfs_layout_segment. objio_osd.c::objio_alloc_lseg() uses passed xdr_stream to decode and store the layout_segment information in an objio_segment struct, using the pnfs_osd_xdr.h API for the actual parsing the layout xdr. objlayout_free_lseg calls objio_free_lseg() to free the allocated space. Signed-off-by: Boaz Harrosh [gfp_flags] [removed "extern" from function definitions] Signed-off-by: Benny Halevy --- fs/nfs/objlayout/Kbuild | 2 +- fs/nfs/objlayout/objio_osd.c | 170 ++++++++++++++++++++++++++++++++++++++++++- fs/nfs/objlayout/objlayout.c | 104 ++++++++++++++++++++++++++ fs/nfs/objlayout/objlayout.h | 67 +++++++++++++++++ 4 files changed, 341 insertions(+), 2 deletions(-) create mode 100644 fs/nfs/objlayout/objlayout.c create mode 100644 fs/nfs/objlayout/objlayout.h diff --git a/fs/nfs/objlayout/Kbuild b/fs/nfs/objlayout/Kbuild index 7b2a5a240657..ed30ea072bb8 100644 --- a/fs/nfs/objlayout/Kbuild +++ b/fs/nfs/objlayout/Kbuild @@ -1,5 +1,5 @@ # # Makefile for the pNFS Objects Layout Driver kernel module # -objlayoutdriver-y := objio_osd.o pnfs_osd_xdr_cli.o +objlayoutdriver-y := objio_osd.o pnfs_osd_xdr_cli.o objlayout.o obj-$(CONFIG_PNFS_OBJLAYOUT) += objlayoutdriver.o diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 379595f2d1cc..08f1d90b4ce7 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -38,11 +38,179 @@ */ #include -#include "../pnfs.h" +#include + +#include "objlayout.h" + +#define NFSDBG_FACILITY NFSDBG_PNFS_LD + +#define _LLU(x) ((unsigned long long)x) + +struct caps_buffers { + u8 caps_key[OSD_CRYPTO_KEYID_SIZE]; + u8 creds[OSD_CAP_LEN]; +}; + +struct objio_segment { + struct pnfs_layout_segment lseg; + + struct pnfs_osd_object_cred *comps; + + unsigned mirrors_p1; + unsigned stripe_unit; + unsigned group_width; /* Data stripe_units without integrity comps */ + u64 group_depth; + unsigned group_count; + + unsigned comps_index; + unsigned num_comps; + /* variable length */ + struct objio_dev_ent *ods[]; +}; + +static inline struct objio_segment * +OBJIO_LSEG(struct pnfs_layout_segment *lseg) +{ + return container_of(lseg, struct objio_segment, lseg); +} + +static int _verify_data_map(struct pnfs_osd_layout *layout) +{ + struct pnfs_osd_data_map *data_map = &layout->olo_map; + u64 stripe_length; + u32 group_width; + +/* FIXME: Only raid0 for now. if not go through MDS */ + if (data_map->odm_raid_algorithm != PNFS_OSD_RAID_0) { + printk(KERN_ERR "Only RAID_0 for now\n"); + return -ENOTSUPP; + } + if (0 != (data_map->odm_num_comps % (data_map->odm_mirror_cnt + 1))) { + printk(KERN_ERR "Data Map wrong, num_comps=%u mirrors=%u\n", + data_map->odm_num_comps, data_map->odm_mirror_cnt); + return -EINVAL; + } + + if (data_map->odm_group_width) + group_width = data_map->odm_group_width; + else + group_width = data_map->odm_num_comps / + (data_map->odm_mirror_cnt + 1); + + stripe_length = (u64)data_map->odm_stripe_unit * group_width; + if (stripe_length >= (1ULL << 32)) { + printk(KERN_ERR "Total Stripe length(0x%llx)" + " >= 32bit is not supported\n", _LLU(stripe_length)); + return -ENOTSUPP; + } + + if (0 != (data_map->odm_stripe_unit & ~PAGE_MASK)) { + printk(KERN_ERR "Stripe Unit(0x%llx)" + " must be Multples of PAGE_SIZE(0x%lx)\n", + _LLU(data_map->odm_stripe_unit), PAGE_SIZE); + return -ENOTSUPP; + } + + return 0; +} + +static void copy_single_comp(struct pnfs_osd_object_cred *cur_comp, + struct pnfs_osd_object_cred *src_comp, + struct caps_buffers *caps_p) +{ + WARN_ON(src_comp->oc_cap_key.cred_len > sizeof(caps_p->caps_key)); + WARN_ON(src_comp->oc_cap.cred_len > sizeof(caps_p->creds)); + + *cur_comp = *src_comp; + + memcpy(caps_p->caps_key, src_comp->oc_cap_key.cred, + sizeof(caps_p->caps_key)); + cur_comp->oc_cap_key.cred = caps_p->caps_key; + + memcpy(caps_p->creds, src_comp->oc_cap.cred, + sizeof(caps_p->creds)); + cur_comp->oc_cap.cred = caps_p->creds; +} + +int objio_alloc_lseg(struct pnfs_layout_segment **outp, + struct pnfs_layout_hdr *pnfslay, + struct pnfs_layout_range *range, + struct xdr_stream *xdr, + gfp_t gfp_flags) +{ + struct objio_segment *objio_seg; + struct pnfs_osd_xdr_decode_layout_iter iter; + struct pnfs_osd_layout layout; + struct pnfs_osd_object_cred *cur_comp, src_comp; + struct caps_buffers *caps_p; + int err; + + err = pnfs_osd_xdr_decode_layout_map(&layout, &iter, xdr); + if (unlikely(err)) + return err; + + err = _verify_data_map(&layout); + if (unlikely(err)) + return err; + + objio_seg = kzalloc(sizeof(*objio_seg) + + sizeof(objio_seg->ods[0]) * layout.olo_num_comps + + sizeof(*objio_seg->comps) * layout.olo_num_comps + + sizeof(struct caps_buffers) * layout.olo_num_comps, + gfp_flags); + if (!objio_seg) + return -ENOMEM; + + objio_seg->comps = (void *)(objio_seg->ods + layout.olo_num_comps); + cur_comp = objio_seg->comps; + caps_p = (void *)(cur_comp + layout.olo_num_comps); + while (pnfs_osd_xdr_decode_layout_comp(&src_comp, &iter, xdr, &err)) + copy_single_comp(cur_comp++, &src_comp, caps_p++); + if (unlikely(err)) + goto err; + + objio_seg->num_comps = layout.olo_num_comps; + objio_seg->comps_index = layout.olo_comps_index; + + objio_seg->mirrors_p1 = layout.olo_map.odm_mirror_cnt + 1; + objio_seg->stripe_unit = layout.olo_map.odm_stripe_unit; + if (layout.olo_map.odm_group_width) { + objio_seg->group_width = layout.olo_map.odm_group_width; + objio_seg->group_depth = layout.olo_map.odm_group_depth; + objio_seg->group_count = layout.olo_map.odm_num_comps / + objio_seg->mirrors_p1 / + objio_seg->group_width; + } else { + objio_seg->group_width = layout.olo_map.odm_num_comps / + objio_seg->mirrors_p1; + objio_seg->group_depth = -1; + objio_seg->group_count = 1; + } + + *outp = &objio_seg->lseg; + return 0; + +err: + kfree(objio_seg); + dprintk("%s: Error: return %d\n", __func__, err); + *outp = NULL; + return err; +} + +void objio_free_lseg(struct pnfs_layout_segment *lseg) +{ + struct objio_segment *objio_seg = OBJIO_LSEG(lseg); + + kfree(objio_seg); +} + static struct pnfs_layoutdriver_type objlayout_type = { .id = LAYOUT_OSD2_OBJECTS, .name = "LAYOUT_OSD2_OBJECTS", + + .alloc_lseg = objlayout_alloc_lseg, + .free_lseg = objlayout_free_lseg, }; MODULE_DESCRIPTION("pNFS Layout Driver for OSD2 objects"); diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c new file mode 100644 index 000000000000..946526763d38 --- /dev/null +++ b/fs/nfs/objlayout/objlayout.c @@ -0,0 +1,104 @@ +/* + * pNFS Objects layout driver high level definitions + * + * Copyright (C) 2007 Panasas Inc. [year of first publication] + * All rights reserved. + * + * Benny Halevy + * Boaz Harrosh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * See the file COPYING included with this distribution for more details. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Panasas company nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include "objlayout.h" + +#define NFSDBG_FACILITY NFSDBG_PNFS_LD +/* + * Unmarshall layout and store it in pnfslay. + */ +struct pnfs_layout_segment * +objlayout_alloc_lseg(struct pnfs_layout_hdr *pnfslay, + struct nfs4_layoutget_res *lgr, + gfp_t gfp_flags) +{ + int status = -ENOMEM; + struct xdr_stream stream; + struct xdr_buf buf = { + .pages = lgr->layoutp->pages, + .page_len = lgr->layoutp->len, + .buflen = lgr->layoutp->len, + .len = lgr->layoutp->len, + }; + struct page *scratch; + struct pnfs_layout_segment *lseg; + + dprintk("%s: Begin pnfslay %p\n", __func__, pnfslay); + + scratch = alloc_page(gfp_flags); + if (!scratch) + goto err_nofree; + + xdr_init_decode(&stream, &buf, NULL); + xdr_set_scratch_buffer(&stream, page_address(scratch), PAGE_SIZE); + + status = objio_alloc_lseg(&lseg, pnfslay, &lgr->range, &stream, gfp_flags); + if (unlikely(status)) { + dprintk("%s: objio_alloc_lseg Return err %d\n", __func__, + status); + goto err; + } + + __free_page(scratch); + + dprintk("%s: Return %p\n", __func__, lseg); + return lseg; + +err: + __free_page(scratch); +err_nofree: + dprintk("%s: Err Return=>%d\n", __func__, status); + return ERR_PTR(status); +} + +/* + * Free a layout segement + */ +void +objlayout_free_lseg(struct pnfs_layout_segment *lseg) +{ + dprintk("%s: freeing layout segment %p\n", __func__, lseg); + + if (unlikely(!lseg)) + return; + + objio_free_lseg(lseg); +} + diff --git a/fs/nfs/objlayout/objlayout.h b/fs/nfs/objlayout/objlayout.h new file mode 100644 index 000000000000..066280a07fa8 --- /dev/null +++ b/fs/nfs/objlayout/objlayout.h @@ -0,0 +1,67 @@ +/* + * Data types and function declerations for interfacing with the + * pNFS standard object layout driver. + * + * Copyright (C) 2007 Panasas Inc. [year of first publication] + * All rights reserved. + * + * Benny Halevy + * Boaz Harrosh + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * See the file COPYING included with this distribution for more details. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the Panasas company nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _OBJLAYOUT_H +#define _OBJLAYOUT_H + +#include +#include +#include "../pnfs.h" + +/* + * Raid engine I/O API + */ +extern int objio_alloc_lseg(struct pnfs_layout_segment **outp, + struct pnfs_layout_hdr *pnfslay, + struct pnfs_layout_range *range, + struct xdr_stream *xdr, + gfp_t gfp_flags); +extern void objio_free_lseg(struct pnfs_layout_segment *lseg); + +/* + * exported generic objects function vectors + */ +extern struct pnfs_layout_segment *objlayout_alloc_lseg( + struct pnfs_layout_hdr *, + struct nfs4_layoutget_res *, + gfp_t gfp_flags); +extern void objlayout_free_lseg(struct pnfs_layout_segment *); + +#endif /* _OBJLAYOUT_H */ -- cgit v1.2.3 From b6c05f1693115164c7b797152ac7ea3ef8e5d296 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 26 May 2011 21:45:34 +0300 Subject: pnfs-obj: objio_osd device information retrieval and caching When a new layout is received in objio_alloc_lseg all device_ids referenced are retrieved. The device information is queried for from MDS and then the osd_device is looked-up from the osd-initiator library. The devices are cached in a per-mount-point list, for later use. At unmount all devices are "put" back to the library. objlayout_get_deviceinfo(), objlayout_put_deviceinfo() middleware API for retrieving device information given a device_id. TODO: The device cache can get big. Cap its size. Keep an LRU and start to return devices which were not used, when list gets to big, or when new entries allocation fail. [pnfs-obj: Bugs in new global-device-cache code] Signed-off-by: Boaz Harrosh [gfp_flags] [use global device cache] [use layout driver in global device cache] Signed-off-by: Benny Halevy --- fs/nfs/objlayout/objio_osd.c | 157 +++++++++++++++++++++++++++++++++++++++++++ fs/nfs/objlayout/objlayout.c | 68 +++++++++++++++++++ fs/nfs/objlayout/objlayout.h | 8 +++ 3 files changed, 233 insertions(+) diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 08f1d90b4ce7..2255e2d22d05 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -46,6 +46,68 @@ #define _LLU(x) ((unsigned long long)x) +struct objio_dev_ent { + struct nfs4_deviceid_node id_node; + struct osd_dev *od; +}; + +static void +objio_free_deviceid_node(struct nfs4_deviceid_node *d) +{ + struct objio_dev_ent *de = container_of(d, struct objio_dev_ent, id_node); + + dprintk("%s: free od=%p\n", __func__, de->od); + osduld_put_device(de->od); + kfree(de); +} + +static struct objio_dev_ent *_dev_list_find(const struct nfs_server *nfss, + const struct nfs4_deviceid *d_id) +{ + struct nfs4_deviceid_node *d; + struct objio_dev_ent *de; + + d = nfs4_find_get_deviceid(nfss->pnfs_curr_ld, nfss->nfs_client, d_id); + if (!d) + return NULL; + + de = container_of(d, struct objio_dev_ent, id_node); + return de; +} + +static struct objio_dev_ent * +_dev_list_add(const struct nfs_server *nfss, + const struct nfs4_deviceid *d_id, struct osd_dev *od, + gfp_t gfp_flags) +{ + struct nfs4_deviceid_node *d; + struct objio_dev_ent *de = kzalloc(sizeof(*de), gfp_flags); + struct objio_dev_ent *n; + + if (!de) { + dprintk("%s: -ENOMEM od=%p\n", __func__, od); + return NULL; + } + + dprintk("%s: Adding od=%p\n", __func__, od); + nfs4_init_deviceid_node(&de->id_node, + nfss->pnfs_curr_ld, + nfss->nfs_client, + d_id); + de->od = od; + + d = nfs4_insert_deviceid_node(&de->id_node); + n = container_of(d, struct objio_dev_ent, id_node); + if (n != de) { + dprintk("%s: Race with other n->od=%p\n", __func__, n->od); + objio_free_deviceid_node(&de->id_node); + de = n; + } + + atomic_inc(&de->id_node.ref); + return de; +} + struct caps_buffers { u8 caps_key[OSD_CRYPTO_KEYID_SIZE]; u8 creds[OSD_CAP_LEN]; @@ -74,6 +136,90 @@ OBJIO_LSEG(struct pnfs_layout_segment *lseg) return container_of(lseg, struct objio_segment, lseg); } +/* Send and wait for a get_device_info of devices in the layout, + then look them up with the osd_initiator library */ +static struct objio_dev_ent *_device_lookup(struct pnfs_layout_hdr *pnfslay, + struct objio_segment *objio_seg, unsigned comp, + gfp_t gfp_flags) +{ + struct pnfs_osd_deviceaddr *deviceaddr; + struct nfs4_deviceid *d_id; + struct objio_dev_ent *ode; + struct osd_dev *od; + struct osd_dev_info odi; + int err; + + d_id = &objio_seg->comps[comp].oc_object_id.oid_device_id; + + ode = _dev_list_find(NFS_SERVER(pnfslay->plh_inode), d_id); + if (ode) + return ode; + + err = objlayout_get_deviceinfo(pnfslay, d_id, &deviceaddr, gfp_flags); + if (unlikely(err)) { + dprintk("%s: objlayout_get_deviceinfo dev(%llx:%llx) =>%d\n", + __func__, _DEVID_LO(d_id), _DEVID_HI(d_id), err); + return ERR_PTR(err); + } + + odi.systemid_len = deviceaddr->oda_systemid.len; + if (odi.systemid_len > sizeof(odi.systemid)) { + err = -EINVAL; + goto out; + } else if (odi.systemid_len) + memcpy(odi.systemid, deviceaddr->oda_systemid.data, + odi.systemid_len); + odi.osdname_len = deviceaddr->oda_osdname.len; + odi.osdname = (u8 *)deviceaddr->oda_osdname.data; + + if (!odi.osdname_len && !odi.systemid_len) { + dprintk("%s: !odi.osdname_len && !odi.systemid_len\n", + __func__); + err = -ENODEV; + goto out; + } + + od = osduld_info_lookup(&odi); + if (unlikely(IS_ERR(od))) { + err = PTR_ERR(od); + dprintk("%s: osduld_info_lookup => %d\n", __func__, err); + goto out; + } + + ode = _dev_list_add(NFS_SERVER(pnfslay->plh_inode), d_id, od, + gfp_flags); + +out: + dprintk("%s: return=%d\n", __func__, err); + objlayout_put_deviceinfo(deviceaddr); + return err ? ERR_PTR(err) : ode; +} + +static int objio_devices_lookup(struct pnfs_layout_hdr *pnfslay, + struct objio_segment *objio_seg, + gfp_t gfp_flags) +{ + unsigned i; + int err; + + /* lookup all devices */ + for (i = 0; i < objio_seg->num_comps; i++) { + struct objio_dev_ent *ode; + + ode = _device_lookup(pnfslay, objio_seg, i, gfp_flags); + if (unlikely(IS_ERR(ode))) { + err = PTR_ERR(ode); + goto out; + } + objio_seg->ods[i] = ode; + } + err = 0; + +out: + dprintk("%s: return=%d\n", __func__, err); + return err; +} + static int _verify_data_map(struct pnfs_osd_layout *layout) { struct pnfs_osd_data_map *data_map = &layout->olo_map; @@ -171,6 +317,9 @@ int objio_alloc_lseg(struct pnfs_layout_segment **outp, objio_seg->num_comps = layout.olo_num_comps; objio_seg->comps_index = layout.olo_comps_index; + err = objio_devices_lookup(pnfslay, objio_seg, gfp_flags); + if (err) + goto err; objio_seg->mirrors_p1 = layout.olo_map.odm_mirror_cnt + 1; objio_seg->stripe_unit = layout.olo_map.odm_stripe_unit; @@ -199,8 +348,14 @@ err: void objio_free_lseg(struct pnfs_layout_segment *lseg) { + int i; struct objio_segment *objio_seg = OBJIO_LSEG(lseg); + for (i = 0; i < objio_seg->num_comps; i++) { + if (!objio_seg->ods[i]) + break; + nfs4_put_deviceid_node(&objio_seg->ods[i]->id_node); + } kfree(objio_seg); } @@ -211,6 +366,8 @@ static struct pnfs_layoutdriver_type objlayout_type = { .alloc_lseg = objlayout_alloc_lseg, .free_lseg = objlayout_free_lseg, + + .free_deviceid_node = objio_free_deviceid_node, }; MODULE_DESCRIPTION("pNFS Layout Driver for OSD2 objects"); diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c index 946526763d38..10e5fca3b7fb 100644 --- a/fs/nfs/objlayout/objlayout.c +++ b/fs/nfs/objlayout/objlayout.c @@ -102,3 +102,71 @@ objlayout_free_lseg(struct pnfs_layout_segment *lseg) objio_free_lseg(lseg); } +/* + * Get Device Info API for io engines + */ +struct objlayout_deviceinfo { + struct page *page; + struct pnfs_osd_deviceaddr da; /* This must be last */ +}; + +/* Initialize and call nfs_getdeviceinfo, then decode and return a + * "struct pnfs_osd_deviceaddr *" Eventually objlayout_put_deviceinfo() + * should be called. + */ +int objlayout_get_deviceinfo(struct pnfs_layout_hdr *pnfslay, + struct nfs4_deviceid *d_id, struct pnfs_osd_deviceaddr **deviceaddr, + gfp_t gfp_flags) +{ + struct objlayout_deviceinfo *odi; + struct pnfs_device pd; + struct super_block *sb; + struct page *page, **pages; + u32 *p; + int err; + + page = alloc_page(gfp_flags); + if (!page) + return -ENOMEM; + + pages = &page; + pd.pages = pages; + + memcpy(&pd.dev_id, d_id, sizeof(*d_id)); + pd.layout_type = LAYOUT_OSD2_OBJECTS; + pd.pages = &page; + pd.pgbase = 0; + pd.pglen = PAGE_SIZE; + pd.mincount = 0; + + sb = pnfslay->plh_inode->i_sb; + err = nfs4_proc_getdeviceinfo(NFS_SERVER(pnfslay->plh_inode), &pd); + dprintk("%s nfs_getdeviceinfo returned %d\n", __func__, err); + if (err) + goto err_out; + + p = page_address(page); + odi = kzalloc(sizeof(*odi), gfp_flags); + if (!odi) { + err = -ENOMEM; + goto err_out; + } + pnfs_osd_xdr_decode_deviceaddr(&odi->da, p); + odi->page = page; + *deviceaddr = &odi->da; + return 0; + +err_out: + __free_page(page); + return err; +} + +void objlayout_put_deviceinfo(struct pnfs_osd_deviceaddr *deviceaddr) +{ + struct objlayout_deviceinfo *odi = container_of(deviceaddr, + struct objlayout_deviceinfo, + da); + + __free_page(odi->page); + kfree(odi); +} diff --git a/fs/nfs/objlayout/objlayout.h b/fs/nfs/objlayout/objlayout.h index 066280a07fa8..0814271bb9ba 100644 --- a/fs/nfs/objlayout/objlayout.h +++ b/fs/nfs/objlayout/objlayout.h @@ -55,6 +55,14 @@ extern int objio_alloc_lseg(struct pnfs_layout_segment **outp, gfp_t gfp_flags); extern void objio_free_lseg(struct pnfs_layout_segment *lseg); +/* + * callback API + */ +extern int objlayout_get_deviceinfo(struct pnfs_layout_hdr *pnfslay, + struct nfs4_deviceid *d_id, struct pnfs_osd_deviceaddr **deviceaddr, + gfp_t gfp_flags); +extern void objlayout_put_deviceinfo(struct pnfs_osd_deviceaddr *deviceaddr); + /* * exported generic objects function vectors */ -- cgit v1.2.3 From 636fb9c89d7e216aac3d406e458864420057e981 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 22 May 2011 19:51:33 +0300 Subject: pnfs: alloc and free layout_hdr layoutdriver methods [gfp_flags] Signed-off-by: Benny Halevy --- fs/nfs/pnfs.c | 21 ++++++++++++++++++--- fs/nfs/pnfs.h | 4 ++++ 2 files changed, 22 insertions(+), 3 deletions(-) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 20436a5e76cd..ef535f2a2c74 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -177,13 +177,28 @@ get_layout_hdr(struct pnfs_layout_hdr *lo) atomic_inc(&lo->plh_refcount); } +static struct pnfs_layout_hdr * +pnfs_alloc_layout_hdr(struct inode *ino, gfp_t gfp_flags) +{ + struct pnfs_layoutdriver_type *ld = NFS_SERVER(ino)->pnfs_curr_ld; + return ld->alloc_layout_hdr ? ld->alloc_layout_hdr(ino, gfp_flags) : + kzalloc(sizeof(struct pnfs_layout_hdr), gfp_flags); +} + +static void +pnfs_free_layout_hdr(struct pnfs_layout_hdr *lo) +{ + struct pnfs_layoutdriver_type *ld = NFS_SERVER(lo->plh_inode)->pnfs_curr_ld; + return ld->alloc_layout_hdr ? ld->free_layout_hdr(lo) : kfree(lo); +} + static void destroy_layout_hdr(struct pnfs_layout_hdr *lo) { dprintk("%s: freeing layout cache %p\n", __func__, lo); BUG_ON(!list_empty(&lo->plh_layouts)); NFS_I(lo->plh_inode)->layout = NULL; - kfree(lo); + pnfs_free_layout_hdr(lo); } static void @@ -744,7 +759,7 @@ alloc_init_layout_hdr(struct inode *ino, gfp_t gfp_flags) { struct pnfs_layout_hdr *lo; - lo = kzalloc(sizeof(struct pnfs_layout_hdr), gfp_flags); + lo = pnfs_alloc_layout_hdr(ino, gfp_flags); if (!lo) return NULL; atomic_set(&lo->plh_refcount, 1); @@ -777,7 +792,7 @@ pnfs_find_alloc_layout(struct inode *ino, gfp_t gfp_flags) if (likely(nfsi->layout == NULL)) /* Won the race? */ nfsi->layout = new; else - kfree(new); + pnfs_free_layout_hdr(new); return nfsi->layout; } diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index f37ab3539cbf..925d6ef8ba79 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -73,6 +73,10 @@ struct pnfs_layoutdriver_type { const u32 id; const char *name; struct module *owner; + + struct pnfs_layout_hdr * (*alloc_layout_hdr) (struct inode *inode, gfp_t gfp_flags); + void (*free_layout_hdr) (struct pnfs_layout_hdr *); + struct pnfs_layout_segment * (*alloc_lseg) (struct pnfs_layout_hdr *layoutid, struct nfs4_layoutget_res *lgr, gfp_t gfp_flags); void (*free_lseg) (struct pnfs_layout_segment *lseg); -- cgit v1.2.3 From e51b841dd0be9ff53f740c44c32c32679edcb7c8 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 22 May 2011 19:51:48 +0300 Subject: pnfs-obj: define per-inode private structure allocate and deallocate per-inode private pnfs_layout_hdr in preparation for I/O implementation. Signed-off-by: Boaz Harrosh Signed-off-by: Benny Halevy --- fs/nfs/objlayout/objio_osd.c | 3 +++ fs/nfs/objlayout/objlayout.c | 26 ++++++++++++++++++++++++++ fs/nfs/objlayout/objlayout.h | 17 +++++++++++++++++ 3 files changed, 46 insertions(+) diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 2255e2d22d05..353821f7937b 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -364,6 +364,9 @@ static struct pnfs_layoutdriver_type objlayout_type = { .id = LAYOUT_OSD2_OBJECTS, .name = "LAYOUT_OSD2_OBJECTS", + .alloc_layout_hdr = objlayout_alloc_layout_hdr, + .free_layout_hdr = objlayout_free_layout_hdr, + .alloc_lseg = objlayout_alloc_lseg, .free_lseg = objlayout_free_lseg, diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c index 10e5fca3b7fb..f14b4da34052 100644 --- a/fs/nfs/objlayout/objlayout.c +++ b/fs/nfs/objlayout/objlayout.c @@ -41,6 +41,32 @@ #include "objlayout.h" #define NFSDBG_FACILITY NFSDBG_PNFS_LD +/* + * Create a objlayout layout structure for the given inode and return it. + */ +struct pnfs_layout_hdr * +objlayout_alloc_layout_hdr(struct inode *inode, gfp_t gfp_flags) +{ + struct objlayout *objlay; + + objlay = kzalloc(sizeof(struct objlayout), gfp_flags); + dprintk("%s: Return %p\n", __func__, objlay); + return &objlay->pnfs_layout; +} + +/* + * Free an objlayout layout structure + */ +void +objlayout_free_layout_hdr(struct pnfs_layout_hdr *lo) +{ + struct objlayout *objlay = OBJLAYOUT(lo); + + dprintk("%s: objlay %p\n", __func__, objlay); + + kfree(objlay); +} + /* * Unmarshall layout and store it in pnfslay. */ diff --git a/fs/nfs/objlayout/objlayout.h b/fs/nfs/objlayout/objlayout.h index 0814271bb9ba..fa0262149f59 100644 --- a/fs/nfs/objlayout/objlayout.h +++ b/fs/nfs/objlayout/objlayout.h @@ -45,6 +45,19 @@ #include #include "../pnfs.h" +/* + * per-inode layout + */ +struct objlayout { + struct pnfs_layout_hdr pnfs_layout; +}; + +static inline struct objlayout * +OBJLAYOUT(struct pnfs_layout_hdr *lo) +{ + return container_of(lo, struct objlayout, pnfs_layout); +} + /* * Raid engine I/O API */ @@ -66,6 +79,10 @@ extern void objlayout_put_deviceinfo(struct pnfs_osd_deviceaddr *deviceaddr); /* * exported generic objects function vectors */ + +extern struct pnfs_layout_hdr *objlayout_alloc_layout_hdr(struct inode *, gfp_t gfp_flags); +extern void objlayout_free_layout_hdr(struct pnfs_layout_hdr *); + extern struct pnfs_layout_segment *objlayout_alloc_lseg( struct pnfs_layout_hdr *, struct nfs4_layoutget_res *, -- cgit v1.2.3 From d20581aa4be11407c9eeeb75992df5ef176bba0f Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 22 May 2011 19:52:03 +0300 Subject: pnfs: support for non-rpc layout drivers Non-rpc layout driver such as for objects and blocks implement their own I/O path and error handling logic. Therefore bypass NFS-based error handling for these layout drivers. [fix lseg ref-count bugs, and null de-refs] [Fall out from: non-rpc layout drivers] Signed-off-by: Boaz Harrosh [get rid of PNFS_USE_RPC_CODE] [get rid of __nfs4_write_done_cb] [revert useless change in nfs4_write_done_cb] Signed-off-by: Benny Halevy --- fs/nfs/internal.h | 1 + fs/nfs/nfs4proc.c | 13 ++++++++++--- fs/nfs/pnfs.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++- fs/nfs/pnfs.h | 2 ++ include/linux/nfs_xdr.h | 2 ++ 5 files changed, 62 insertions(+), 4 deletions(-) diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index ce118ce885dd..bcf0f0ff5eeb 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -310,6 +310,7 @@ extern int nfs_migrate_page(struct address_space *, #endif /* nfs4proc.c */ +extern void __nfs4_read_done_cb(struct nfs_read_data *); extern void nfs4_reset_read(struct rpc_task *task, struct nfs_read_data *data); extern int nfs4_init_client(struct nfs_client *clp, const struct rpc_timeout *timeparms, diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index cf1b339c3937..92c8bc4b5f97 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3175,6 +3175,11 @@ static int nfs4_proc_pathconf(struct nfs_server *server, struct nfs_fh *fhandle, return err; } +void __nfs4_read_done_cb(struct nfs_read_data *data) +{ + nfs_invalidate_atime(data->inode); +} + static int nfs4_read_done_cb(struct rpc_task *task, struct nfs_read_data *data) { struct nfs_server *server = NFS_SERVER(data->inode); @@ -3184,7 +3189,7 @@ static int nfs4_read_done_cb(struct rpc_task *task, struct nfs_read_data *data) return -EAGAIN; } - nfs_invalidate_atime(data->inode); + __nfs4_read_done_cb(data); if (task->tk_status > 0) renew_lease(server, data->timestamp); return 0; @@ -3198,7 +3203,8 @@ static int nfs4_read_done(struct rpc_task *task, struct nfs_read_data *data) if (!nfs4_sequence_done(task, &data->res.seq_res)) return -EAGAIN; - return data->read_done_cb(task, data); + return data->read_done_cb ? data->read_done_cb(task, data) : + nfs4_read_done_cb(task, data); } static void nfs4_proc_read_setup(struct nfs_read_data *data, struct rpc_message *msg) @@ -3243,7 +3249,8 @@ static int nfs4_write_done(struct rpc_task *task, struct nfs_write_data *data) { if (!nfs4_sequence_done(task, &data->res.seq_res)) return -EAGAIN; - return data->write_done_cb(task, data); + return data->write_done_cb ? data->write_done_cb(task, data) : + nfs4_write_done_cb(task, data); } /* Reset the the nfs_write_data to send the write to the MDS. */ diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index ef535f2a2c74..171662114fdd 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -243,7 +243,7 @@ put_lseg_common(struct pnfs_layout_segment *lseg) { struct inode *inode = lseg->pls_layout->plh_inode; - BUG_ON(test_bit(NFS_LSEG_VALID, &lseg->pls_flags)); + WARN_ON(test_bit(NFS_LSEG_VALID, &lseg->pls_flags)); list_del_init(&lseg->pls_list); if (list_empty(&lseg->pls_layout->plh_segs)) { set_bit(NFS_LAYOUT_DESTROYED, &lseg->pls_layout->plh_flags); @@ -1054,6 +1054,29 @@ pnfs_pageio_init_write(struct nfs_pageio_descriptor *pgio, struct inode *inode) pgio->pg_test = (ld && ld->pg_test) ? pnfs_write_pg_test : NULL; } +/* + * Called by non rpc-based layout drivers + */ +int +pnfs_ld_write_done(struct nfs_write_data *data) +{ + int status; + + if (!data->pnfs_error) { + pnfs_set_layoutcommit(data); + data->mds_ops->rpc_call_done(&data->task, data); + data->mds_ops->rpc_release(data); + return 0; + } + + dprintk("%s: pnfs_error=%d, retry via MDS\n", __func__, + data->pnfs_error); + status = nfs_initiate_write(data, NFS_CLIENT(data->inode), + data->mds_ops, NFS_FILE_SYNC); + return status ? : -EAGAIN; +} +EXPORT_SYMBOL_GPL(pnfs_ld_write_done); + enum pnfs_try_status pnfs_try_to_write_data(struct nfs_write_data *wdata, const struct rpc_call_ops *call_ops, int how) @@ -1078,6 +1101,29 @@ pnfs_try_to_write_data(struct nfs_write_data *wdata, return trypnfs; } +/* + * Called by non rpc-based layout drivers + */ +int +pnfs_ld_read_done(struct nfs_read_data *data) +{ + int status; + + if (!data->pnfs_error) { + __nfs4_read_done_cb(data); + data->mds_ops->rpc_call_done(&data->task, data); + data->mds_ops->rpc_release(data); + return 0; + } + + dprintk("%s: pnfs_error=%d, retry via MDS\n", __func__, + data->pnfs_error); + status = nfs_initiate_read(data, NFS_CLIENT(data->inode), + data->mds_ops); + return status ? : -EAGAIN; +} +EXPORT_SYMBOL_GPL(pnfs_ld_read_done); + /* * Call the appropriate parallel I/O subsystem read function. */ diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 925d6ef8ba79..0383e66e71f0 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -165,6 +165,8 @@ void pnfs_roc_set_barrier(struct inode *ino, u32 barrier); bool pnfs_roc_drain(struct inode *ino, u32 *barrier); void pnfs_set_layoutcommit(struct nfs_write_data *wdata); int pnfs_layoutcommit_inode(struct inode *inode, bool sync); +int pnfs_ld_write_done(struct nfs_write_data *); +int pnfs_ld_read_done(struct nfs_read_data *); /* pnfs_dev.c */ struct nfs4_deviceid_node { diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 7e371f7df9c4..7c8ff0984a84 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -1087,6 +1087,7 @@ struct nfs_read_data { const struct rpc_call_ops *mds_ops; int (*read_done_cb) (struct rpc_task *task, struct nfs_read_data *data); __u64 mds_offset; + int pnfs_error; struct page *page_array[NFS_PAGEVEC_SIZE]; }; @@ -1112,6 +1113,7 @@ struct nfs_write_data { unsigned long timestamp; /* For lease renewal */ #endif __u64 mds_offset; /* Filelayout dense stripe */ + int pnfs_error; struct page *page_array[NFS_PAGEVEC_SIZE]; }; -- cgit v1.2.3 From 04f83450388e87d86b387cf4a27b81eb7e69de7d Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 22 May 2011 19:52:19 +0300 Subject: pnfs-obj: osd raid engine read/write implementation With the use of the in-kernel osd library. Implement read/write of data from/to osd-objects according to information specified in the objects-layout. Support for stripping over mirrors with a received stripe_unit. There are however a few constrains which are not supported: 1. Stripe Unit must be a multiple of PAGE_SIZE 2. stripe length (stripe_unit * number_of_stripes) can not be bigger then 32bit. Also support raid-groups and partial-layout. Partial-layout is when not all the groups are received on the line, addressing only a partial range of the file. TODO: Only raid0! raid 4/5/6 support will come at later stage A none supported layout will send IO through the MDS [Important fallout from the last rebase] Signed-off-by: Boaz Harrosh [gfp_flags] Signed-off-by: Benny Halevy --- fs/nfs/objlayout/objio_osd.c | 605 +++++++++++++++++++++++++++++++++++++++++++ fs/nfs/objlayout/objlayout.c | 254 ++++++++++++++++++ fs/nfs/objlayout/objlayout.h | 42 +++ 3 files changed, 901 insertions(+) diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 353821f7937b..cc92d3b3dc3a 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -46,6 +46,10 @@ #define _LLU(x) ((unsigned long long)x) +enum { BIO_MAX_PAGES_KMALLOC = + (PAGE_SIZE - sizeof(struct bio)) / sizeof(struct bio_vec), +}; + struct objio_dev_ent { struct nfs4_deviceid_node id_node; struct osd_dev *od; @@ -136,6 +140,31 @@ OBJIO_LSEG(struct pnfs_layout_segment *lseg) return container_of(lseg, struct objio_segment, lseg); } +struct objio_state; +typedef ssize_t (*objio_done_fn)(struct objio_state *ios); + +struct objio_state { + /* Generic layer */ + struct objlayout_io_state ol_state; + + struct objio_segment *layout; + + struct kref kref; + objio_done_fn done; + void *private; + + unsigned long length; + unsigned numdevs; /* Actually used devs in this IO */ + /* A per-device variable array of size numdevs */ + struct _objio_per_comp { + struct bio *bio; + struct osd_request *or; + unsigned long length; + u64 offset; + unsigned dev; + } per_dev[]; +}; + /* Send and wait for a get_device_info of devices in the layout, then look them up with the osd_initiator library */ static struct objio_dev_ent *_device_lookup(struct pnfs_layout_hdr *pnfslay, @@ -359,6 +388,578 @@ void objio_free_lseg(struct pnfs_layout_segment *lseg) kfree(objio_seg); } +int objio_alloc_io_state(struct pnfs_layout_segment *lseg, + struct objlayout_io_state **outp, + gfp_t gfp_flags) +{ + struct objio_segment *objio_seg = OBJIO_LSEG(lseg); + struct objio_state *ios; + const unsigned first_size = sizeof(*ios) + + objio_seg->num_comps * sizeof(ios->per_dev[0]); + + ios = kzalloc(first_size, gfp_flags); + if (unlikely(!ios)) + return -ENOMEM; + + ios->layout = objio_seg; + + *outp = &ios->ol_state; + return 0; +} + +void objio_free_io_state(struct objlayout_io_state *ol_state) +{ + struct objio_state *ios = container_of(ol_state, struct objio_state, + ol_state); + + kfree(ios); +} + +static void _clear_bio(struct bio *bio) +{ + struct bio_vec *bv; + unsigned i; + + __bio_for_each_segment(bv, bio, i, 0) { + unsigned this_count = bv->bv_len; + + if (likely(PAGE_SIZE == this_count)) + clear_highpage(bv->bv_page); + else + zero_user(bv->bv_page, bv->bv_offset, this_count); + } +} + +static int _io_check(struct objio_state *ios, bool is_write) +{ + enum osd_err_priority oep = OSD_ERR_PRI_NO_ERROR; + int lin_ret = 0; + int i; + + for (i = 0; i < ios->numdevs; i++) { + struct osd_sense_info osi; + struct osd_request *or = ios->per_dev[i].or; + unsigned dev; + int ret; + + if (!or) + continue; + + ret = osd_req_decode_sense(or, &osi); + if (likely(!ret)) + continue; + + if (OSD_ERR_PRI_CLEAR_PAGES == osi.osd_err_pri) { + /* start read offset passed endof file */ + BUG_ON(is_write); + _clear_bio(ios->per_dev[i].bio); + dprintk("%s: start read offset passed end of file " + "offset=0x%llx, length=0x%lx\n", __func__, + _LLU(ios->per_dev[i].offset), + ios->per_dev[i].length); + + continue; /* we recovered */ + } + dev = ios->per_dev[i].dev; + + if (osi.osd_err_pri >= oep) { + oep = osi.osd_err_pri; + lin_ret = ret; + } + } + + return lin_ret; +} + +/* + * Common IO state helpers. + */ +static void _io_free(struct objio_state *ios) +{ + unsigned i; + + for (i = 0; i < ios->numdevs; i++) { + struct _objio_per_comp *per_dev = &ios->per_dev[i]; + + if (per_dev->or) { + osd_end_request(per_dev->or); + per_dev->or = NULL; + } + + if (per_dev->bio) { + bio_put(per_dev->bio); + per_dev->bio = NULL; + } + } +} + +struct osd_dev *_io_od(struct objio_state *ios, unsigned dev) +{ + unsigned min_dev = ios->layout->comps_index; + unsigned max_dev = min_dev + ios->layout->num_comps; + + BUG_ON(dev < min_dev || max_dev <= dev); + return ios->layout->ods[dev - min_dev]->od; +} + +struct _striping_info { + u64 obj_offset; + u64 group_length; + unsigned dev; + unsigned unit_off; +}; + +static void _calc_stripe_info(struct objio_state *ios, u64 file_offset, + struct _striping_info *si) +{ + u32 stripe_unit = ios->layout->stripe_unit; + u32 group_width = ios->layout->group_width; + u64 group_depth = ios->layout->group_depth; + u32 U = stripe_unit * group_width; + + u64 T = U * group_depth; + u64 S = T * ios->layout->group_count; + u64 M = div64_u64(file_offset, S); + + /* + G = (L - (M * S)) / T + H = (L - (M * S)) % T + */ + u64 LmodU = file_offset - M * S; + u32 G = div64_u64(LmodU, T); + u64 H = LmodU - G * T; + + u32 N = div_u64(H, U); + + div_u64_rem(file_offset, stripe_unit, &si->unit_off); + si->obj_offset = si->unit_off + (N * stripe_unit) + + (M * group_depth * stripe_unit); + + /* "H - (N * U)" is just "H % U" so it's bound to u32 */ + si->dev = (u32)(H - (N * U)) / stripe_unit + G * group_width; + si->dev *= ios->layout->mirrors_p1; + + si->group_length = T - H; +} + +static int _add_stripe_unit(struct objio_state *ios, unsigned *cur_pg, + unsigned pgbase, struct _objio_per_comp *per_dev, int cur_len, + gfp_t gfp_flags) +{ + unsigned pg = *cur_pg; + struct request_queue *q = + osd_request_queue(_io_od(ios, per_dev->dev)); + + per_dev->length += cur_len; + + if (per_dev->bio == NULL) { + unsigned stripes = ios->layout->num_comps / + ios->layout->mirrors_p1; + unsigned pages_in_stripe = stripes * + (ios->layout->stripe_unit / PAGE_SIZE); + unsigned bio_size = (ios->ol_state.nr_pages + pages_in_stripe) / + stripes; + + if (BIO_MAX_PAGES_KMALLOC < bio_size) + bio_size = BIO_MAX_PAGES_KMALLOC; + + per_dev->bio = bio_kmalloc(gfp_flags, bio_size); + if (unlikely(!per_dev->bio)) { + dprintk("Faild to allocate BIO size=%u\n", bio_size); + return -ENOMEM; + } + } + + while (cur_len > 0) { + unsigned pglen = min_t(unsigned, PAGE_SIZE - pgbase, cur_len); + unsigned added_len; + + BUG_ON(ios->ol_state.nr_pages <= pg); + cur_len -= pglen; + + added_len = bio_add_pc_page(q, per_dev->bio, + ios->ol_state.pages[pg], pglen, pgbase); + if (unlikely(pglen != added_len)) + return -ENOMEM; + pgbase = 0; + ++pg; + } + BUG_ON(cur_len); + + *cur_pg = pg; + return 0; +} + +static int _prepare_one_group(struct objio_state *ios, u64 length, + struct _striping_info *si, unsigned *last_pg, + gfp_t gfp_flags) +{ + unsigned stripe_unit = ios->layout->stripe_unit; + unsigned mirrors_p1 = ios->layout->mirrors_p1; + unsigned devs_in_group = ios->layout->group_width * mirrors_p1; + unsigned dev = si->dev; + unsigned first_dev = dev - (dev % devs_in_group); + unsigned max_comp = ios->numdevs ? ios->numdevs - mirrors_p1 : 0; + unsigned cur_pg = *last_pg; + int ret = 0; + + while (length) { + struct _objio_per_comp *per_dev = &ios->per_dev[dev]; + unsigned cur_len, page_off = 0; + + if (!per_dev->length) { + per_dev->dev = dev; + if (dev < si->dev) { + per_dev->offset = si->obj_offset + stripe_unit - + si->unit_off; + cur_len = stripe_unit; + } else if (dev == si->dev) { + per_dev->offset = si->obj_offset; + cur_len = stripe_unit - si->unit_off; + page_off = si->unit_off & ~PAGE_MASK; + BUG_ON(page_off && + (page_off != ios->ol_state.pgbase)); + } else { /* dev > si->dev */ + per_dev->offset = si->obj_offset - si->unit_off; + cur_len = stripe_unit; + } + + if (max_comp < dev) + max_comp = dev; + } else { + cur_len = stripe_unit; + } + if (cur_len >= length) + cur_len = length; + + ret = _add_stripe_unit(ios, &cur_pg, page_off , per_dev, + cur_len, gfp_flags); + if (unlikely(ret)) + goto out; + + dev += mirrors_p1; + dev = (dev % devs_in_group) + first_dev; + + length -= cur_len; + ios->length += cur_len; + } +out: + ios->numdevs = max_comp + mirrors_p1; + *last_pg = cur_pg; + return ret; +} + +static int _io_rw_pagelist(struct objio_state *ios, gfp_t gfp_flags) +{ + u64 length = ios->ol_state.count; + u64 offset = ios->ol_state.offset; + struct _striping_info si; + unsigned last_pg = 0; + int ret = 0; + + while (length) { + _calc_stripe_info(ios, offset, &si); + + if (length < si.group_length) + si.group_length = length; + + ret = _prepare_one_group(ios, si.group_length, &si, &last_pg, gfp_flags); + if (unlikely(ret)) + goto out; + + offset += si.group_length; + length -= si.group_length; + } + +out: + if (!ios->length) + return ret; + + return 0; +} + +static ssize_t _sync_done(struct objio_state *ios) +{ + struct completion *waiting = ios->private; + + complete(waiting); + return 0; +} + +static void _last_io(struct kref *kref) +{ + struct objio_state *ios = container_of(kref, struct objio_state, kref); + + ios->done(ios); +} + +static void _done_io(struct osd_request *or, void *p) +{ + struct objio_state *ios = p; + + kref_put(&ios->kref, _last_io); +} + +static ssize_t _io_exec(struct objio_state *ios) +{ + DECLARE_COMPLETION_ONSTACK(wait); + ssize_t status = 0; /* sync status */ + unsigned i; + objio_done_fn saved_done_fn = ios->done; + bool sync = ios->ol_state.sync; + + if (sync) { + ios->done = _sync_done; + ios->private = &wait; + } + + kref_init(&ios->kref); + + for (i = 0; i < ios->numdevs; i++) { + struct osd_request *or = ios->per_dev[i].or; + + if (!or) + continue; + + kref_get(&ios->kref); + osd_execute_request_async(or, _done_io, ios); + } + + kref_put(&ios->kref, _last_io); + + if (sync) { + wait_for_completion(&wait); + status = saved_done_fn(ios); + } + + return status; +} + +/* + * read + */ +static ssize_t _read_done(struct objio_state *ios) +{ + ssize_t status; + int ret = _io_check(ios, false); + + _io_free(ios); + + if (likely(!ret)) + status = ios->length; + else + status = ret; + + objlayout_read_done(&ios->ol_state, status, ios->ol_state.sync); + return status; +} + +static int _read_mirrors(struct objio_state *ios, unsigned cur_comp) +{ + struct osd_request *or = NULL; + struct _objio_per_comp *per_dev = &ios->per_dev[cur_comp]; + unsigned dev = per_dev->dev; + struct pnfs_osd_object_cred *cred = + &ios->layout->comps[dev]; + struct osd_obj_id obj = { + .partition = cred->oc_object_id.oid_partition_id, + .id = cred->oc_object_id.oid_object_id, + }; + int ret; + + or = osd_start_request(_io_od(ios, dev), GFP_KERNEL); + if (unlikely(!or)) { + ret = -ENOMEM; + goto err; + } + per_dev->or = or; + + osd_req_read(or, &obj, per_dev->offset, per_dev->bio, per_dev->length); + + ret = osd_finalize_request(or, 0, cred->oc_cap.cred, NULL); + if (ret) { + dprintk("%s: Faild to osd_finalize_request() => %d\n", + __func__, ret); + goto err; + } + + dprintk("%s:[%d] dev=%d obj=0x%llx start=0x%llx length=0x%lx\n", + __func__, cur_comp, dev, obj.id, _LLU(per_dev->offset), + per_dev->length); + +err: + return ret; +} + +static ssize_t _read_exec(struct objio_state *ios) +{ + unsigned i; + int ret; + + for (i = 0; i < ios->numdevs; i += ios->layout->mirrors_p1) { + if (!ios->per_dev[i].length) + continue; + ret = _read_mirrors(ios, i); + if (unlikely(ret)) + goto err; + } + + ios->done = _read_done; + return _io_exec(ios); /* In sync mode exec returns the io status */ + +err: + _io_free(ios); + return ret; +} + +ssize_t objio_read_pagelist(struct objlayout_io_state *ol_state) +{ + struct objio_state *ios = container_of(ol_state, struct objio_state, + ol_state); + int ret; + + ret = _io_rw_pagelist(ios, GFP_KERNEL); + if (unlikely(ret)) + return ret; + + return _read_exec(ios); +} + +/* + * write + */ +static ssize_t _write_done(struct objio_state *ios) +{ + ssize_t status; + int ret = _io_check(ios, true); + + _io_free(ios); + + if (likely(!ret)) { + /* FIXME: should be based on the OSD's persistence model + * See OSD2r05 Section 4.13 Data persistence model */ + ios->ol_state.committed = NFS_FILE_SYNC; + status = ios->length; + } else { + status = ret; + } + + objlayout_write_done(&ios->ol_state, status, ios->ol_state.sync); + return status; +} + +static int _write_mirrors(struct objio_state *ios, unsigned cur_comp) +{ + struct _objio_per_comp *master_dev = &ios->per_dev[cur_comp]; + unsigned dev = ios->per_dev[cur_comp].dev; + unsigned last_comp = cur_comp + ios->layout->mirrors_p1; + int ret; + + for (; cur_comp < last_comp; ++cur_comp, ++dev) { + struct osd_request *or = NULL; + struct pnfs_osd_object_cred *cred = + &ios->layout->comps[dev]; + struct osd_obj_id obj = { + .partition = cred->oc_object_id.oid_partition_id, + .id = cred->oc_object_id.oid_object_id, + }; + struct _objio_per_comp *per_dev = &ios->per_dev[cur_comp]; + struct bio *bio; + + or = osd_start_request(_io_od(ios, dev), GFP_NOFS); + if (unlikely(!or)) { + ret = -ENOMEM; + goto err; + } + per_dev->or = or; + + if (per_dev != master_dev) { + bio = bio_kmalloc(GFP_NOFS, + master_dev->bio->bi_max_vecs); + if (unlikely(!bio)) { + dprintk("Faild to allocate BIO size=%u\n", + master_dev->bio->bi_max_vecs); + ret = -ENOMEM; + goto err; + } + + __bio_clone(bio, master_dev->bio); + bio->bi_bdev = NULL; + bio->bi_next = NULL; + per_dev->bio = bio; + per_dev->dev = dev; + per_dev->length = master_dev->length; + per_dev->offset = master_dev->offset; + } else { + bio = master_dev->bio; + bio->bi_rw |= REQ_WRITE; + } + + osd_req_write(or, &obj, per_dev->offset, bio, per_dev->length); + + ret = osd_finalize_request(or, 0, cred->oc_cap.cred, NULL); + if (ret) { + dprintk("%s: Faild to osd_finalize_request() => %d\n", + __func__, ret); + goto err; + } + + dprintk("%s:[%d] dev=%d obj=0x%llx start=0x%llx length=0x%lx\n", + __func__, cur_comp, dev, obj.id, _LLU(per_dev->offset), + per_dev->length); + } + +err: + return ret; +} + +static ssize_t _write_exec(struct objio_state *ios) +{ + unsigned i; + int ret; + + for (i = 0; i < ios->numdevs; i += ios->layout->mirrors_p1) { + if (!ios->per_dev[i].length) + continue; + ret = _write_mirrors(ios, i); + if (unlikely(ret)) + goto err; + } + + ios->done = _write_done; + return _io_exec(ios); /* In sync mode exec returns the io->status */ + +err: + _io_free(ios); + return ret; +} + +ssize_t objio_write_pagelist(struct objlayout_io_state *ol_state, bool stable) +{ + struct objio_state *ios = container_of(ol_state, struct objio_state, + ol_state); + int ret; + + /* TODO: ios->stable = stable; */ + ret = _io_rw_pagelist(ios, GFP_NOFS); + if (unlikely(ret)) + return ret; + + return _write_exec(ios); +} + +/* + * objlayout_pg_test(). Called by nfs_can_coalesce_requests() + * + * return 1 : coalesce page + * return 0 : don't coalesce page + */ +int +objlayout_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, + struct nfs_page *req) +{ + return 1; +} static struct pnfs_layoutdriver_type objlayout_type = { .id = LAYOUT_OSD2_OBJECTS, @@ -370,6 +971,10 @@ static struct pnfs_layoutdriver_type objlayout_type = { .alloc_lseg = objlayout_alloc_lseg, .free_lseg = objlayout_free_lseg, + .read_pagelist = objlayout_read_pagelist, + .write_pagelist = objlayout_write_pagelist, + .pg_test = objlayout_pg_test, + .free_deviceid_node = objio_free_deviceid_node, }; diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c index f14b4da34052..5157ef6d0041 100644 --- a/fs/nfs/objlayout/objlayout.c +++ b/fs/nfs/objlayout/objlayout.c @@ -128,6 +128,260 @@ objlayout_free_lseg(struct pnfs_layout_segment *lseg) objio_free_lseg(lseg); } +/* + * I/O Operations + */ +static inline u64 +end_offset(u64 start, u64 len) +{ + u64 end; + + end = start + len; + return end >= start ? end : NFS4_MAX_UINT64; +} + +/* last octet in a range */ +static inline u64 +last_byte_offset(u64 start, u64 len) +{ + u64 end; + + BUG_ON(!len); + end = start + len; + return end > start ? end - 1 : NFS4_MAX_UINT64; +} + +static struct objlayout_io_state * +objlayout_alloc_io_state(struct pnfs_layout_hdr *pnfs_layout_type, + struct page **pages, + unsigned pgbase, + loff_t offset, + size_t count, + struct pnfs_layout_segment *lseg, + void *rpcdata, + gfp_t gfp_flags) +{ + struct objlayout_io_state *state; + u64 lseg_end_offset; + + dprintk("%s: allocating io_state\n", __func__); + if (objio_alloc_io_state(lseg, &state, gfp_flags)) + return NULL; + + BUG_ON(offset < lseg->pls_range.offset); + lseg_end_offset = end_offset(lseg->pls_range.offset, + lseg->pls_range.length); + BUG_ON(offset >= lseg_end_offset); + if (offset + count > lseg_end_offset) { + count = lseg->pls_range.length - + (offset - lseg->pls_range.offset); + dprintk("%s: truncated count %Zd\n", __func__, count); + } + + if (pgbase > PAGE_SIZE) { + pages += pgbase >> PAGE_SHIFT; + pgbase &= ~PAGE_MASK; + } + + state->lseg = lseg; + state->rpcdata = rpcdata; + state->pages = pages; + state->pgbase = pgbase; + state->nr_pages = (pgbase + count + PAGE_SIZE - 1) >> PAGE_SHIFT; + state->offset = offset; + state->count = count; + state->sync = 0; + + return state; +} + +static void +objlayout_free_io_state(struct objlayout_io_state *state) +{ + dprintk("%s: freeing io_state\n", __func__); + if (unlikely(!state)) + return; + + objio_free_io_state(state); +} + +/* + * I/O done common code + */ +static void +objlayout_iodone(struct objlayout_io_state *state) +{ + dprintk("%s: state %p status\n", __func__, state); + + objlayout_free_io_state(state); +} + +/* Function scheduled on rpc workqueue to call ->nfs_readlist_complete(). + * This is because the osd completion is called with ints-off from + * the block layer + */ +static void _rpc_read_complete(struct work_struct *work) +{ + struct rpc_task *task; + struct nfs_read_data *rdata; + + dprintk("%s enter\n", __func__); + task = container_of(work, struct rpc_task, u.tk_work); + rdata = container_of(task, struct nfs_read_data, task); + + pnfs_ld_read_done(rdata); +} + +void +objlayout_read_done(struct objlayout_io_state *state, ssize_t status, bool sync) +{ + int eof = state->eof; + struct nfs_read_data *rdata; + + state->status = status; + dprintk("%s: Begin status=%ld eof=%d\n", __func__, status, eof); + rdata = state->rpcdata; + rdata->task.tk_status = status; + if (status >= 0) { + rdata->res.count = status; + rdata->res.eof = eof; + } + objlayout_iodone(state); + /* must not use state after this point */ + + if (sync) + pnfs_ld_read_done(rdata); + else { + INIT_WORK(&rdata->task.u.tk_work, _rpc_read_complete); + schedule_work(&rdata->task.u.tk_work); + } +} + +/* + * Perform sync or async reads. + */ +enum pnfs_try_status +objlayout_read_pagelist(struct nfs_read_data *rdata) +{ + loff_t offset = rdata->args.offset; + size_t count = rdata->args.count; + struct objlayout_io_state *state; + ssize_t status = 0; + loff_t eof; + + dprintk("%s: Begin inode %p offset %llu count %d\n", + __func__, rdata->inode, offset, (int)count); + + eof = i_size_read(rdata->inode); + if (unlikely(offset + count > eof)) { + if (offset >= eof) { + status = 0; + rdata->res.count = 0; + rdata->res.eof = 1; + goto out; + } + count = eof - offset; + } + + state = objlayout_alloc_io_state(NFS_I(rdata->inode)->layout, + rdata->args.pages, rdata->args.pgbase, + offset, count, + rdata->lseg, rdata, + GFP_KERNEL); + if (unlikely(!state)) { + status = -ENOMEM; + goto out; + } + + state->eof = state->offset + state->count >= eof; + + status = objio_read_pagelist(state); + out: + dprintk("%s: Return status %Zd\n", __func__, status); + rdata->pnfs_error = status; + return PNFS_ATTEMPTED; +} + +/* Function scheduled on rpc workqueue to call ->nfs_writelist_complete(). + * This is because the osd completion is called with ints-off from + * the block layer + */ +static void _rpc_write_complete(struct work_struct *work) +{ + struct rpc_task *task; + struct nfs_write_data *wdata; + + dprintk("%s enter\n", __func__); + task = container_of(work, struct rpc_task, u.tk_work); + wdata = container_of(task, struct nfs_write_data, task); + + pnfs_ld_write_done(wdata); +} + +void +objlayout_write_done(struct objlayout_io_state *state, ssize_t status, + bool sync) +{ + struct nfs_write_data *wdata; + + dprintk("%s: Begin\n", __func__); + wdata = state->rpcdata; + state->status = status; + wdata->task.tk_status = status; + if (status >= 0) { + wdata->res.count = status; + wdata->verf.committed = state->committed; + dprintk("%s: Return status %d committed %d\n", + __func__, wdata->task.tk_status, + wdata->verf.committed); + } else + dprintk("%s: Return status %d\n", + __func__, wdata->task.tk_status); + objlayout_iodone(state); + /* must not use state after this point */ + + if (sync) + pnfs_ld_write_done(wdata); + else { + INIT_WORK(&wdata->task.u.tk_work, _rpc_write_complete); + schedule_work(&wdata->task.u.tk_work); + } +} + +/* + * Perform sync or async writes. + */ +enum pnfs_try_status +objlayout_write_pagelist(struct nfs_write_data *wdata, + int how) +{ + struct objlayout_io_state *state; + ssize_t status; + + dprintk("%s: Begin inode %p offset %llu count %u\n", + __func__, wdata->inode, wdata->args.offset, wdata->args.count); + + state = objlayout_alloc_io_state(NFS_I(wdata->inode)->layout, + wdata->args.pages, + wdata->args.pgbase, + wdata->args.offset, + wdata->args.count, + wdata->lseg, wdata, + GFP_NOFS); + if (unlikely(!state)) { + status = -ENOMEM; + goto out; + } + + state->sync = how & FLUSH_SYNC; + + status = objio_write_pagelist(state, how & FLUSH_STABLE); + out: + dprintk("%s: Return status %Zd\n", __func__, status); + wdata->pnfs_error = status; + return PNFS_ATTEMPTED; +} + /* * Get Device Info API for io engines */ diff --git a/fs/nfs/objlayout/objlayout.h b/fs/nfs/objlayout/objlayout.h index fa0262149f59..9a405e8069f3 100644 --- a/fs/nfs/objlayout/objlayout.h +++ b/fs/nfs/objlayout/objlayout.h @@ -58,6 +58,26 @@ OBJLAYOUT(struct pnfs_layout_hdr *lo) return container_of(lo, struct objlayout, pnfs_layout); } +/* + * per-I/O operation state + * embedded in objects provider io_state data structure + */ +struct objlayout_io_state { + struct pnfs_layout_segment *lseg; + + struct page **pages; + unsigned pgbase; + unsigned nr_pages; + unsigned long count; + loff_t offset; + bool sync; + + void *rpcdata; + int status; /* res */ + int eof; /* res */ + int committed; /* res */ +}; + /* * Raid engine I/O API */ @@ -68,9 +88,24 @@ extern int objio_alloc_lseg(struct pnfs_layout_segment **outp, gfp_t gfp_flags); extern void objio_free_lseg(struct pnfs_layout_segment *lseg); +extern int objio_alloc_io_state( + struct pnfs_layout_segment *lseg, + struct objlayout_io_state **outp, + gfp_t gfp_flags); +extern void objio_free_io_state(struct objlayout_io_state *state); + +extern ssize_t objio_read_pagelist(struct objlayout_io_state *ol_state); +extern ssize_t objio_write_pagelist(struct objlayout_io_state *ol_state, + bool stable); + /* * callback API */ +extern void objlayout_read_done(struct objlayout_io_state *state, + ssize_t status, bool sync); +extern void objlayout_write_done(struct objlayout_io_state *state, + ssize_t status, bool sync); + extern int objlayout_get_deviceinfo(struct pnfs_layout_hdr *pnfslay, struct nfs4_deviceid *d_id, struct pnfs_osd_deviceaddr **deviceaddr, gfp_t gfp_flags); @@ -89,4 +124,11 @@ extern struct pnfs_layout_segment *objlayout_alloc_lseg( gfp_t gfp_flags); extern void objlayout_free_lseg(struct pnfs_layout_segment *); +extern enum pnfs_try_status objlayout_read_pagelist( + struct nfs_read_data *); + +extern enum pnfs_try_status objlayout_write_pagelist( + struct nfs_write_data *, + int how); + #endif /* _OBJLAYOUT_H */ -- cgit v1.2.3 From cbe8260369c9f88eafa035cd327dc3e02fad528c Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 22 May 2011 19:52:37 +0300 Subject: pnfs: layoutreturn NFSv4.1 LAYOUTRETURN implementation Currently, does not support layout-type payload encoding. Signed-off-by: Alexandros Batsakis Signed-off-by: Andy Adamson Signed-off-by: Andy Adamson Signed-off-by: Dean Hildebrand Signed-off-by: Fred Isaman Signed-off-by: Fred Isaman Signed-off-by: Marc Eshel Signed-off-by: Zhang Jingwang [call pnfs_return_layout right before pnfs_destroy_layout] [remove assert_spin_locked from pnfs_clear_lseg_list] [remove wait parameter from the layoutreturn path.] [remove return_type field from nfs4_layoutreturn_args] [remove range from nfs4_layoutreturn_args] [no need to send layoutcommit from _pnfs_return_layout] [don't wait on sync layoutreturn] [fix layout stateid in layoutreturn args] [fixed NULL deref in _pnfs_return_layout] [removed recaim member of nfs4_layoutreturn_args] Signed-off-by: Benny Halevy --- fs/nfs/inode.c | 3 +- fs/nfs/nfs4proc.c | 82 +++++++++++++++++++++++++++++++++++ fs/nfs/nfs4xdr.c | 111 +++++++++++++++++++++++++++++++++++++++++++++--- fs/nfs/pnfs.c | 45 ++++++++++++++++++++ fs/nfs/pnfs.h | 18 ++++++++ include/linux/nfs4.h | 1 + include/linux/nfs_xdr.h | 21 +++++++++ 7 files changed, 274 insertions(+), 7 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index 57bb31ad7a5e..e9c6d9f8f7e8 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -1424,9 +1424,10 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) */ void nfs4_evict_inode(struct inode *inode) { - pnfs_destroy_layout(NFS_I(inode)); truncate_inode_pages(&inode->i_data, 0); end_writeback(inode); + pnfs_return_layout(inode); + pnfs_destroy_layout(NFS_I(inode)); /* If we are holding a delegation, return it! */ nfs_inode_return_delegation_noreclaim(inode); /* First call standard NFS clear_inode() code */ diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 92c8bc4b5f97..5b4124e4c22f 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5673,6 +5673,88 @@ int nfs4_proc_layoutget(struct nfs4_layoutget *lgp) return status; } +static void +nfs4_layoutreturn_prepare(struct rpc_task *task, void *calldata) +{ + struct nfs4_layoutreturn *lrp = calldata; + + dprintk("--> %s\n", __func__); + if (nfs41_setup_sequence(lrp->clp->cl_session, &lrp->args.seq_args, + &lrp->res.seq_res, 0, task)) + return; + rpc_call_start(task); +} + +static void nfs4_layoutreturn_done(struct rpc_task *task, void *calldata) +{ + struct nfs4_layoutreturn *lrp = calldata; + struct nfs_server *server; + + dprintk("--> %s\n", __func__); + + if (!nfs4_sequence_done(task, &lrp->res.seq_res)) + return; + + server = NFS_SERVER(lrp->args.inode); + if (nfs4_async_handle_error(task, server, NULL) == -EAGAIN) { + nfs_restart_rpc(task, lrp->clp); + return; + } + if (task->tk_status == 0) { + struct pnfs_layout_hdr *lo = NFS_I(lrp->args.inode)->layout; + + if (lrp->res.lrs_present) { + spin_lock(&lo->plh_inode->i_lock); + pnfs_set_layout_stateid(lo, &lrp->res.stateid, true); + spin_unlock(&lo->plh_inode->i_lock); + } else + BUG_ON(!list_empty(&lo->plh_segs)); + } + dprintk("<-- %s\n", __func__); +} + +static void nfs4_layoutreturn_release(void *calldata) +{ + struct nfs4_layoutreturn *lrp = calldata; + + dprintk("--> %s\n", __func__); + put_layout_hdr(NFS_I(lrp->args.inode)->layout); + kfree(calldata); + dprintk("<-- %s\n", __func__); +} + +static const struct rpc_call_ops nfs4_layoutreturn_call_ops = { + .rpc_call_prepare = nfs4_layoutreturn_prepare, + .rpc_call_done = nfs4_layoutreturn_done, + .rpc_release = nfs4_layoutreturn_release, +}; + +int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp) +{ + struct rpc_task *task; + struct rpc_message msg = { + .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_LAYOUTRETURN], + .rpc_argp = &lrp->args, + .rpc_resp = &lrp->res, + }; + struct rpc_task_setup task_setup_data = { + .rpc_client = lrp->clp->cl_rpcclient, + .rpc_message = &msg, + .callback_ops = &nfs4_layoutreturn_call_ops, + .callback_data = lrp, + }; + int status; + + dprintk("--> %s\n", __func__); + task = rpc_run_task(&task_setup_data); + if (IS_ERR(task)) + return PTR_ERR(task); + status = task->tk_status; + dprintk("<-- %s status=%d\n", __func__, status); + rpc_put_task(task); + return status; +} + static int _nfs4_proc_getdeviceinfo(struct nfs_server *server, struct pnfs_device *pdev) { diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index c3ccd2c46834..f24212064356 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -338,7 +338,11 @@ static int nfs4_stat_to_errno(int); 1 /* layoutupdate4 layout type */ + \ 1 /* NULL filelayout layoutupdate4 payload */) #define decode_layoutcommit_maxsz (op_decode_hdr_maxsz + 3) - +#define encode_layoutreturn_maxsz (8 + op_encode_hdr_maxsz + \ + encode_stateid_maxsz + \ + 1 /* FIXME: opaque lrf_body always empty at the moment */) +#define decode_layoutreturn_maxsz (op_decode_hdr_maxsz + \ + 1 + decode_stateid_maxsz) #else /* CONFIG_NFS_V4_1 */ #define encode_sequence_maxsz 0 #define decode_sequence_maxsz 0 @@ -760,7 +764,14 @@ static int nfs4_stat_to_errno(int); decode_putfh_maxsz + \ decode_layoutcommit_maxsz + \ decode_getattr_maxsz) - +#define NFS4_enc_layoutreturn_sz (compound_encode_hdr_maxsz + \ + encode_sequence_maxsz + \ + encode_putfh_maxsz + \ + encode_layoutreturn_maxsz) +#define NFS4_dec_layoutreturn_sz (compound_decode_hdr_maxsz + \ + decode_sequence_maxsz + \ + decode_putfh_maxsz + \ + decode_layoutreturn_maxsz) const u32 nfs41_maxwrite_overhead = ((RPC_MAX_HEADER_WITH_AUTH + compound_encode_hdr_maxsz + @@ -1889,6 +1900,31 @@ encode_layoutcommit(struct xdr_stream *xdr, hdr->replen += decode_layoutcommit_maxsz; return 0; } + +static void +encode_layoutreturn(struct xdr_stream *xdr, + const struct nfs4_layoutreturn_args *args, + struct compound_hdr *hdr) +{ + __be32 *p; + + p = reserve_space(xdr, 20); + *p++ = cpu_to_be32(OP_LAYOUTRETURN); + *p++ = cpu_to_be32(0); /* reclaim. always 0 for now */ + *p++ = cpu_to_be32(args->layout_type); + *p++ = cpu_to_be32(IOMODE_ANY); + *p = cpu_to_be32(RETURN_FILE); + p = reserve_space(xdr, 16 + NFS4_STATEID_SIZE); + p = xdr_encode_hyper(p, 0); + p = xdr_encode_hyper(p, NFS4_MAX_UINT64); + spin_lock(&args->inode->i_lock); + xdr_encode_opaque_fixed(p, &args->stateid.data, NFS4_STATEID_SIZE); + spin_unlock(&args->inode->i_lock); + p = reserve_space(xdr, 4); + *p = cpu_to_be32(0); + hdr->nops++; + hdr->replen += decode_layoutreturn_maxsz; +} #endif /* CONFIG_NFS_V4_1 */ /* @@ -2706,9 +2742,9 @@ static void nfs4_xdr_enc_layoutget(struct rpc_rqst *req, /* * Encode LAYOUTCOMMIT request */ -static int nfs4_xdr_enc_layoutcommit(struct rpc_rqst *req, - struct xdr_stream *xdr, - struct nfs4_layoutcommit_args *args) +static void nfs4_xdr_enc_layoutcommit(struct rpc_rqst *req, + struct xdr_stream *xdr, + struct nfs4_layoutcommit_args *args) { struct compound_hdr hdr = { .minorversion = nfs4_xdr_minorversion(&args->seq_args), @@ -2720,7 +2756,24 @@ static int nfs4_xdr_enc_layoutcommit(struct rpc_rqst *req, encode_layoutcommit(xdr, args, &hdr); encode_getfattr(xdr, args->bitmask, &hdr); encode_nops(&hdr); - return 0; +} + +/* + * Encode LAYOUTRETURN request + */ +static void nfs4_xdr_enc_layoutreturn(struct rpc_rqst *req, + struct xdr_stream *xdr, + struct nfs4_layoutreturn_args *args) +{ + struct compound_hdr hdr = { + .minorversion = nfs4_xdr_minorversion(&args->seq_args), + }; + + encode_compound_hdr(xdr, req, &hdr); + encode_sequence(xdr, &args->seq_args, &hdr); + encode_putfh(xdr, NFS_FH(args->inode), &hdr); + encode_layoutreturn(xdr, args, &hdr); + encode_nops(&hdr); } #endif /* CONFIG_NFS_V4_1 */ @@ -5203,6 +5256,27 @@ out_overflow: return -EIO; } +static int decode_layoutreturn(struct xdr_stream *xdr, + struct nfs4_layoutreturn_res *res) +{ + __be32 *p; + int status; + + status = decode_op_hdr(xdr, OP_LAYOUTRETURN); + if (status) + return status; + p = xdr_inline_decode(xdr, 4); + if (unlikely(!p)) + goto out_overflow; + res->lrs_present = be32_to_cpup(p); + if (res->lrs_present) + status = decode_stateid(xdr, &res->stateid); + return status; +out_overflow: + print_overflow_msg(__func__, xdr); + return -EIO; +} + static int decode_layoutcommit(struct xdr_stream *xdr, struct rpc_rqst *req, struct nfs4_layoutcommit_res *res) @@ -6319,6 +6393,30 @@ out: return status; } +/* + * Decode LAYOUTRETURN response + */ +static int nfs4_xdr_dec_layoutreturn(struct rpc_rqst *rqstp, + struct xdr_stream *xdr, + struct nfs4_layoutreturn_res *res) +{ + struct compound_hdr hdr; + int status; + + status = decode_compound_hdr(xdr, &hdr); + if (status) + goto out; + status = decode_sequence(xdr, &res->seq_res, rqstp); + if (status) + goto out; + status = decode_putfh(xdr); + if (status) + goto out; + status = decode_layoutreturn(xdr, res); +out: + return status; +} + /* * Decode LAYOUTCOMMIT response */ @@ -6547,6 +6645,7 @@ struct rpc_procinfo nfs4_procedures[] = { PROC(GETDEVICEINFO, enc_getdeviceinfo, dec_getdeviceinfo), PROC(LAYOUTGET, enc_layoutget, dec_layoutget), PROC(LAYOUTCOMMIT, enc_layoutcommit, dec_layoutcommit), + PROC(LAYOUTRETURN, enc_layoutreturn, dec_layoutreturn), #endif /* CONFIG_NFS_V4_1 */ }; diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 171662114fdd..00b128241746 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -619,6 +619,51 @@ out_err_free: return NULL; } +/* Initiates a LAYOUTRETURN(FILE) */ +int +_pnfs_return_layout(struct inode *ino) +{ + struct pnfs_layout_hdr *lo = NULL; + struct nfs_inode *nfsi = NFS_I(ino); + LIST_HEAD(tmp_list); + struct nfs4_layoutreturn *lrp; + nfs4_stateid stateid; + int status = 0; + + dprintk("--> %s\n", __func__); + + spin_lock(&ino->i_lock); + lo = nfsi->layout; + if (!lo || !mark_matching_lsegs_invalid(lo, &tmp_list, NULL)) { + spin_unlock(&ino->i_lock); + dprintk("%s: no layout segments to return\n", __func__); + goto out; + } + stateid = nfsi->layout->plh_stateid; + /* Reference matched in nfs4_layoutreturn_release */ + get_layout_hdr(lo); + spin_unlock(&ino->i_lock); + pnfs_free_lseg_list(&tmp_list); + + WARN_ON(test_bit(NFS_INO_LAYOUTCOMMIT, &nfsi->flags)); + + lrp = kzalloc(sizeof(*lrp), GFP_KERNEL); + if (unlikely(lrp == NULL)) { + status = -ENOMEM; + goto out; + } + + lrp->args.stateid = stateid; + lrp->args.layout_type = NFS_SERVER(ino)->pnfs_curr_ld->id; + lrp->args.inode = ino; + lrp->clp = NFS_SERVER(ino)->nfs_client; + + status = nfs4_proc_layoutreturn(lrp); +out: + dprintk("<-- %s status: %d\n", __func__, status); + return status; +} + bool pnfs_roc(struct inode *ino) { struct pnfs_layout_hdr *lo; diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 0383e66e71f0..c34f7a0e3bc2 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -129,6 +129,7 @@ extern void pnfs_unregister_layoutdriver(struct pnfs_layoutdriver_type *); extern int nfs4_proc_getdeviceinfo(struct nfs_server *server, struct pnfs_device *dev); extern int nfs4_proc_layoutget(struct nfs4_layoutget *lgp); +extern int nfs4_proc_layoutreturn(struct nfs4_layoutreturn *lrp); /* pnfs.c */ void get_layout_hdr(struct pnfs_layout_hdr *lo); @@ -165,6 +166,7 @@ void pnfs_roc_set_barrier(struct inode *ino, u32 barrier); bool pnfs_roc_drain(struct inode *ino, u32 *barrier); void pnfs_set_layoutcommit(struct nfs_write_data *wdata); int pnfs_layoutcommit_inode(struct inode *inode, bool sync); +int _pnfs_return_layout(struct inode *); int pnfs_ld_write_done(struct nfs_write_data *); int pnfs_ld_read_done(struct nfs_read_data *); @@ -256,6 +258,17 @@ static inline void pnfs_clear_request_commit(struct nfs_page *req) put_lseg(req->wb_commit_lseg); } +static inline int pnfs_return_layout(struct inode *ino) +{ + struct nfs_inode *nfsi = NFS_I(ino); + struct nfs_server *nfss = NFS_SERVER(ino); + + if (pnfs_enabled_sb(nfss) && nfsi->layout) + return _pnfs_return_layout(ino); + + return 0; +} + #else /* CONFIG_NFS_V4_1 */ static inline void pnfs_destroy_all_layouts(struct nfs_client *clp) @@ -298,6 +311,11 @@ pnfs_try_to_write_data(struct nfs_write_data *data, return PNFS_NOT_ATTEMPTED; } +static inline int pnfs_return_layout(struct inode *ino) +{ + return 0; +} + static inline bool pnfs_roc(struct inode *ino) { diff --git a/include/linux/nfs4.h b/include/linux/nfs4.h index 178fafe0ff93..9376eaf26e15 100644 --- a/include/linux/nfs4.h +++ b/include/linux/nfs4.h @@ -562,6 +562,7 @@ enum { NFSPROC4_CLNT_LAYOUTGET, NFSPROC4_CLNT_GETDEVICEINFO, NFSPROC4_CLNT_LAYOUTCOMMIT, + NFSPROC4_CLNT_LAYOUTRETURN, }; /* nfs41 types */ diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index 7c8ff0984a84..5e8444a11adf 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -269,6 +269,27 @@ struct nfs4_layoutcommit_data { struct nfs4_layoutcommit_res res; }; +struct nfs4_layoutreturn_args { + __u32 layout_type; + struct inode *inode; + nfs4_stateid stateid; + struct nfs4_sequence_args seq_args; +}; + +struct nfs4_layoutreturn_res { + struct nfs4_sequence_res seq_res; + u32 lrs_present; + nfs4_stateid stateid; +}; + +struct nfs4_layoutreturn { + struct nfs4_layoutreturn_args args; + struct nfs4_layoutreturn_res res; + struct rpc_cred *cred; + struct nfs_client *clp; + int rpc_status; +}; + /* * Arguments to the open call. */ -- cgit v1.2.3 From 8a1636c459cb7a4b32ba4024cd1b2ba21fba6aed Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Wed, 14 Jul 2010 15:43:57 -0400 Subject: pnfs: layoutret_on_setattr With the objects layout security model, we have object capabilities that are associated with the layout and we anticipate that the server will issue a cb_layoutrecall for any setattr that changes security related attributes (user/group/mode/acl) or truncates the file. Therefore, the layout is returned before issuing the setattr to avoid the anticipated cb_layoutrecall. Signed-off-by: Benny Halevy --- fs/nfs/nfs4proc.c | 3 +++ fs/nfs/objlayout/objio_osd.c | 1 + fs/nfs/pnfs.h | 22 ++++++++++++++++++++++ 3 files changed, 26 insertions(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 5b4124e4c22f..57340096c737 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2361,6 +2361,9 @@ nfs4_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr, struct nfs4_state *state = NULL; int status; + if (pnfs_ld_layoutret_on_setattr(inode)) + pnfs_return_layout(inode); + nfs_fattr_init(fattr); /* Search for an existing open(O_WRITE) file */ diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index cc92d3b3dc3a..4e8de3ec9a63 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -964,6 +964,7 @@ objlayout_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, static struct pnfs_layoutdriver_type objlayout_type = { .id = LAYOUT_OSD2_OBJECTS, .name = "LAYOUT_OSD2_OBJECTS", + .flags = PNFS_LAYOUTRET_ON_SETATTR, .alloc_layout_hdr = objlayout_alloc_layout_hdr, .free_layout_hdr = objlayout_free_layout_hdr, diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index c34f7a0e3bc2..af3967a893a1 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -65,6 +65,11 @@ enum { NFS_LAYOUT_DESTROYED, /* no new use of layout allowed */ }; +enum layoutdriver_policy_flags { + /* Should the pNFS client commit and return the layout upon a setattr */ + PNFS_LAYOUTRET_ON_SETATTR = 1 << 0, +}; + struct nfs4_deviceid_node; /* Per-layout driver specific registration structure */ @@ -73,6 +78,7 @@ struct pnfs_layoutdriver_type { const u32 id; const char *name; struct module *owner; + unsigned flags; struct pnfs_layout_hdr * (*alloc_layout_hdr) (struct inode *inode, gfp_t gfp_flags); void (*free_layout_hdr) (struct pnfs_layout_hdr *); @@ -258,6 +264,16 @@ static inline void pnfs_clear_request_commit(struct nfs_page *req) put_lseg(req->wb_commit_lseg); } +/* Should the pNFS client commit and return the layout upon a setattr */ +static inline bool +pnfs_ld_layoutret_on_setattr(struct inode *inode) +{ + if (!pnfs_enabled_sb(NFS_SERVER(inode))) + return false; + return NFS_SERVER(inode)->pnfs_curr_ld->flags & + PNFS_LAYOUTRET_ON_SETATTR; +} + static inline int pnfs_return_layout(struct inode *ino) { struct nfs_inode *nfsi = NFS_I(ino); @@ -316,6 +332,12 @@ static inline int pnfs_return_layout(struct inode *ino) return 0; } +static inline bool +pnfs_ld_layoutret_on_setattr(struct inode *inode) +{ + return false; +} + static inline bool pnfs_roc(struct inode *ino) { -- cgit v1.2.3 From 04a555498e03b3804e2dec916a4669f5f560e503 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Sun, 22 May 2011 19:53:10 +0300 Subject: pnfs: encode_layoutreturn Add a layout driver method to encode the layout type specific opaque part of layout return in-line in the xdr stream. Currently the pnfs-objects layout driver uses it to encode i/o error information on LAYOUTRETURN. Signed-off-by: Andy Adamson [fixup layout header pointer for encode_layoutreturn] Signed-off-by: Benny Halevy --- fs/nfs/nfs4xdr.c | 9 +++++++-- fs/nfs/pnfs.h | 4 ++++ 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index f24212064356..d464badc0067 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -1920,8 +1920,13 @@ encode_layoutreturn(struct xdr_stream *xdr, spin_lock(&args->inode->i_lock); xdr_encode_opaque_fixed(p, &args->stateid.data, NFS4_STATEID_SIZE); spin_unlock(&args->inode->i_lock); - p = reserve_space(xdr, 4); - *p = cpu_to_be32(0); + if (NFS_SERVER(args->inode)->pnfs_curr_ld->encode_layoutreturn) { + NFS_SERVER(args->inode)->pnfs_curr_ld->encode_layoutreturn( + NFS_I(args->inode)->layout, xdr, args); + } else { + p = reserve_space(xdr, 4); + *p = cpu_to_be32(0); + } hdr->nops++; hdr->replen += decode_layoutreturn_maxsz; } diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index af3967a893a1..1b6b207a8806 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -104,6 +104,10 @@ struct pnfs_layoutdriver_type { enum pnfs_try_status (*write_pagelist) (struct nfs_write_data *nfs_data, int how); void (*free_deviceid_node) (struct nfs4_deviceid_node *); + + void (*encode_layoutreturn) (struct pnfs_layout_hdr *layoutid, + struct xdr_stream *xdr, + const struct nfs4_layoutreturn_args *args); }; struct pnfs_layout_hdr { -- cgit v1.2.3 From adb58535e604a564495a7d50dfb0afa0ddc21bcb Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Thu, 26 May 2011 21:49:46 +0300 Subject: pnfs-obj: report errors and .encode_layoutreturn Implementation. An io_state pre-allocates an error information structure for each possible osd-device that might error during IO. When IO is done if all was well the io_state is freed. (as today). If the I/O has ended with an error, the io_state is queued on a per-layout err_list. When eventually encode_layoutreturn() is called, each error is properly encoded on the XDR buffer and only then the io_state is removed from err_list and de-allocated. It is up to the io_engine to fill in the segment that fault and the type of osd_error that occurred. By calling objlayout_io_set_result() for each failing device. In objio_osd: * Allocate io-error descriptors space as part of io_state * Use generic objlayout error reporting at end of io. Signed-off-by: Boaz Harrosh Signed-off-by: Benny Halevy --- fs/nfs/objlayout/objio_osd.c | 44 +++++++- fs/nfs/objlayout/objlayout.c | 232 ++++++++++++++++++++++++++++++++++++++++++- fs/nfs/objlayout/objlayout.h | 23 +++++ 3 files changed, 297 insertions(+), 2 deletions(-) diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 4e8de3ec9a63..8bca5e13f3ef 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -396,12 +396,16 @@ int objio_alloc_io_state(struct pnfs_layout_segment *lseg, struct objio_state *ios; const unsigned first_size = sizeof(*ios) + objio_seg->num_comps * sizeof(ios->per_dev[0]); + const unsigned sec_size = objio_seg->num_comps * + sizeof(ios->ol_state.ioerrs[0]); - ios = kzalloc(first_size, gfp_flags); + ios = kzalloc(first_size + sec_size, gfp_flags); if (unlikely(!ios)) return -ENOMEM; ios->layout = objio_seg; + ios->ol_state.ioerrs = ((void *)ios) + first_size; + ios->ol_state.num_comps = objio_seg->num_comps; *outp = &ios->ol_state; return 0; @@ -415,6 +419,36 @@ void objio_free_io_state(struct objlayout_io_state *ol_state) kfree(ios); } +enum pnfs_osd_errno osd_pri_2_pnfs_err(enum osd_err_priority oep) +{ + switch (oep) { + case OSD_ERR_PRI_NO_ERROR: + return (enum pnfs_osd_errno)0; + + case OSD_ERR_PRI_CLEAR_PAGES: + BUG_ON(1); + return 0; + + case OSD_ERR_PRI_RESOURCE: + return PNFS_OSD_ERR_RESOURCE; + case OSD_ERR_PRI_BAD_CRED: + return PNFS_OSD_ERR_BAD_CRED; + case OSD_ERR_PRI_NO_ACCESS: + return PNFS_OSD_ERR_NO_ACCESS; + case OSD_ERR_PRI_UNREACHABLE: + return PNFS_OSD_ERR_UNREACHABLE; + case OSD_ERR_PRI_NOT_FOUND: + return PNFS_OSD_ERR_NOT_FOUND; + case OSD_ERR_PRI_NO_SPACE: + return PNFS_OSD_ERR_NO_SPACE; + default: + WARN_ON(1); + /* fallthrough */ + case OSD_ERR_PRI_EIO: + return PNFS_OSD_ERR_EIO; + } +} + static void _clear_bio(struct bio *bio) { struct bio_vec *bv; @@ -461,6 +495,12 @@ static int _io_check(struct objio_state *ios, bool is_write) continue; /* we recovered */ } dev = ios->per_dev[i].dev; + objlayout_io_set_result(&ios->ol_state, dev, + &ios->layout->comps[dev].oc_object_id, + osd_pri_2_pnfs_err(osi.osd_err_pri), + ios->per_dev[i].offset, + ios->per_dev[i].length, + is_write); if (osi.osd_err_pri >= oep) { oep = osi.osd_err_pri; @@ -977,6 +1017,8 @@ static struct pnfs_layoutdriver_type objlayout_type = { .pg_test = objlayout_pg_test, .free_deviceid_node = objio_free_deviceid_node, + + .encode_layoutreturn = objlayout_encode_layoutreturn, }; MODULE_DESCRIPTION("pNFS Layout Driver for OSD2 objects"); diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c index 5157ef6d0041..f7caecff6b4d 100644 --- a/fs/nfs/objlayout/objlayout.c +++ b/fs/nfs/objlayout/objlayout.c @@ -50,6 +50,10 @@ objlayout_alloc_layout_hdr(struct inode *inode, gfp_t gfp_flags) struct objlayout *objlay; objlay = kzalloc(sizeof(struct objlayout), gfp_flags); + if (objlay) { + spin_lock_init(&objlay->lock); + INIT_LIST_HEAD(&objlay->err_list); + } dprintk("%s: Return %p\n", __func__, objlay); return &objlay->pnfs_layout; } @@ -64,6 +68,7 @@ objlayout_free_layout_hdr(struct pnfs_layout_hdr *lo) dprintk("%s: objlay %p\n", __func__, objlay); + WARN_ON(!list_empty(&objlay->err_list)); kfree(objlay); } @@ -183,6 +188,7 @@ objlayout_alloc_io_state(struct pnfs_layout_hdr *pnfs_layout_type, pgbase &= ~PAGE_MASK; } + INIT_LIST_HEAD(&state->err_list); state->lseg = lseg; state->rpcdata = rpcdata; state->pages = pages; @@ -213,7 +219,52 @@ objlayout_iodone(struct objlayout_io_state *state) { dprintk("%s: state %p status\n", __func__, state); - objlayout_free_io_state(state); + if (likely(state->status >= 0)) { + objlayout_free_io_state(state); + } else { + struct objlayout *objlay = OBJLAYOUT(state->lseg->pls_layout); + + spin_lock(&objlay->lock); + list_add(&objlay->err_list, &state->err_list); + spin_unlock(&objlay->lock); + } +} + +/* + * objlayout_io_set_result - Set an osd_error code on a specific osd comp. + * + * The @index component IO failed (error returned from target). Register + * the error for later reporting at layout-return. + */ +void +objlayout_io_set_result(struct objlayout_io_state *state, unsigned index, + struct pnfs_osd_objid *pooid, int osd_error, + u64 offset, u64 length, bool is_write) +{ + struct pnfs_osd_ioerr *ioerr = &state->ioerrs[index]; + + BUG_ON(index >= state->num_comps); + if (osd_error) { + ioerr->oer_component = *pooid; + ioerr->oer_comp_offset = offset; + ioerr->oer_comp_length = length; + ioerr->oer_iswrite = is_write; + ioerr->oer_errno = osd_error; + + dprintk("%s: err[%d]: errno=%d is_write=%d dev(%llx:%llx) " + "par=0x%llx obj=0x%llx offset=0x%llx length=0x%llx\n", + __func__, index, ioerr->oer_errno, + ioerr->oer_iswrite, + _DEVID_LO(&ioerr->oer_component.oid_device_id), + _DEVID_HI(&ioerr->oer_component.oid_device_id), + ioerr->oer_component.oid_partition_id, + ioerr->oer_component.oid_object_id, + ioerr->oer_comp_offset, + ioerr->oer_comp_length); + } else { + /* User need not call if no error is reported */ + ioerr->oer_errno = 0; + } } /* Function scheduled on rpc workqueue to call ->nfs_readlist_complete(). @@ -382,6 +433,185 @@ objlayout_write_pagelist(struct nfs_write_data *wdata, return PNFS_ATTEMPTED; } +static int +err_prio(u32 oer_errno) +{ + switch (oer_errno) { + case 0: + return 0; + + case PNFS_OSD_ERR_RESOURCE: + return OSD_ERR_PRI_RESOURCE; + case PNFS_OSD_ERR_BAD_CRED: + return OSD_ERR_PRI_BAD_CRED; + case PNFS_OSD_ERR_NO_ACCESS: + return OSD_ERR_PRI_NO_ACCESS; + case PNFS_OSD_ERR_UNREACHABLE: + return OSD_ERR_PRI_UNREACHABLE; + case PNFS_OSD_ERR_NOT_FOUND: + return OSD_ERR_PRI_NOT_FOUND; + case PNFS_OSD_ERR_NO_SPACE: + return OSD_ERR_PRI_NO_SPACE; + default: + WARN_ON(1); + /* fallthrough */ + case PNFS_OSD_ERR_EIO: + return OSD_ERR_PRI_EIO; + } +} + +static void +merge_ioerr(struct pnfs_osd_ioerr *dest_err, + const struct pnfs_osd_ioerr *src_err) +{ + u64 dest_end, src_end; + + if (!dest_err->oer_errno) { + *dest_err = *src_err; + /* accumulated device must be blank */ + memset(&dest_err->oer_component.oid_device_id, 0, + sizeof(dest_err->oer_component.oid_device_id)); + + return; + } + + if (dest_err->oer_component.oid_partition_id != + src_err->oer_component.oid_partition_id) + dest_err->oer_component.oid_partition_id = 0; + + if (dest_err->oer_component.oid_object_id != + src_err->oer_component.oid_object_id) + dest_err->oer_component.oid_object_id = 0; + + if (dest_err->oer_comp_offset > src_err->oer_comp_offset) + dest_err->oer_comp_offset = src_err->oer_comp_offset; + + dest_end = end_offset(dest_err->oer_comp_offset, + dest_err->oer_comp_length); + src_end = end_offset(src_err->oer_comp_offset, + src_err->oer_comp_length); + if (dest_end < src_end) + dest_end = src_end; + + dest_err->oer_comp_length = dest_end - dest_err->oer_comp_offset; + + if ((src_err->oer_iswrite == dest_err->oer_iswrite) && + (err_prio(src_err->oer_errno) > err_prio(dest_err->oer_errno))) { + dest_err->oer_errno = src_err->oer_errno; + } else if (src_err->oer_iswrite) { + dest_err->oer_iswrite = true; + dest_err->oer_errno = src_err->oer_errno; + } +} + +static void +encode_accumulated_error(struct objlayout *objlay, __be32 *p) +{ + struct objlayout_io_state *state, *tmp; + struct pnfs_osd_ioerr accumulated_err = {.oer_errno = 0}; + + list_for_each_entry_safe(state, tmp, &objlay->err_list, err_list) { + unsigned i; + + for (i = 0; i < state->num_comps; i++) { + struct pnfs_osd_ioerr *ioerr = &state->ioerrs[i]; + + if (!ioerr->oer_errno) + continue; + + printk(KERN_ERR "%s: err[%d]: errno=%d is_write=%d " + "dev(%llx:%llx) par=0x%llx obj=0x%llx " + "offset=0x%llx length=0x%llx\n", + __func__, i, ioerr->oer_errno, + ioerr->oer_iswrite, + _DEVID_LO(&ioerr->oer_component.oid_device_id), + _DEVID_HI(&ioerr->oer_component.oid_device_id), + ioerr->oer_component.oid_partition_id, + ioerr->oer_component.oid_object_id, + ioerr->oer_comp_offset, + ioerr->oer_comp_length); + + merge_ioerr(&accumulated_err, ioerr); + } + list_del(&state->err_list); + objlayout_free_io_state(state); + } + + pnfs_osd_xdr_encode_ioerr(p, &accumulated_err); +} + +void +objlayout_encode_layoutreturn(struct pnfs_layout_hdr *pnfslay, + struct xdr_stream *xdr, + const struct nfs4_layoutreturn_args *args) +{ + struct objlayout *objlay = OBJLAYOUT(pnfslay); + struct objlayout_io_state *state, *tmp; + __be32 *start; + + dprintk("%s: Begin\n", __func__); + start = xdr_reserve_space(xdr, 4); + BUG_ON(!start); + + spin_lock(&objlay->lock); + + list_for_each_entry_safe(state, tmp, &objlay->err_list, err_list) { + __be32 *last_xdr = NULL, *p; + unsigned i; + int res = 0; + + for (i = 0; i < state->num_comps; i++) { + struct pnfs_osd_ioerr *ioerr = &state->ioerrs[i]; + + if (!ioerr->oer_errno) + continue; + + dprintk("%s: err[%d]: errno=%d is_write=%d " + "dev(%llx:%llx) par=0x%llx obj=0x%llx " + "offset=0x%llx length=0x%llx\n", + __func__, i, ioerr->oer_errno, + ioerr->oer_iswrite, + _DEVID_LO(&ioerr->oer_component.oid_device_id), + _DEVID_HI(&ioerr->oer_component.oid_device_id), + ioerr->oer_component.oid_partition_id, + ioerr->oer_component.oid_object_id, + ioerr->oer_comp_offset, + ioerr->oer_comp_length); + + p = pnfs_osd_xdr_ioerr_reserve_space(xdr); + if (unlikely(!p)) { + res = -E2BIG; + break; /* accumulated_error */ + } + + last_xdr = p; + pnfs_osd_xdr_encode_ioerr(p, &state->ioerrs[i]); + } + + /* TODO: use xdr_write_pages */ + if (unlikely(res)) { + /* no space for even one error descriptor */ + BUG_ON(!last_xdr); + + /* we've encountered a situation with lots and lots of + * errors and no space to encode them all. Use the last + * available slot to report the union of all the + * remaining errors. + */ + encode_accumulated_error(objlay, last_xdr); + goto loop_done; + } + list_del(&state->err_list); + objlayout_free_io_state(state); + } +loop_done: + spin_unlock(&objlay->lock); + + *start = cpu_to_be32((xdr->p - start - 1) * 4); + dprintk("%s: Return\n", __func__); +} + + /* * Get Device Info API for io engines */ diff --git a/fs/nfs/objlayout/objlayout.h b/fs/nfs/objlayout/objlayout.h index 9a405e8069f3..b0bb975058e4 100644 --- a/fs/nfs/objlayout/objlayout.h +++ b/fs/nfs/objlayout/objlayout.h @@ -50,6 +50,10 @@ */ struct objlayout { struct pnfs_layout_hdr pnfs_layout; + + /* for layout_return */ + spinlock_t lock; + struct list_head err_list; }; static inline struct objlayout * @@ -76,6 +80,16 @@ struct objlayout_io_state { int status; /* res */ int eof; /* res */ int committed; /* res */ + + /* Error reporting (layout_return) */ + struct list_head err_list; + unsigned num_comps; + /* Pointer to array of error descriptors of size num_comps. + * It should contain as many entries as devices in the osd_layout + * that participate in the I/O. It is up to the io_engine to allocate + * needed space and set num_comps. + */ + struct pnfs_osd_ioerr *ioerrs; }; /* @@ -101,6 +115,10 @@ extern ssize_t objio_write_pagelist(struct objlayout_io_state *ol_state, /* * callback API */ +extern void objlayout_io_set_result(struct objlayout_io_state *state, + unsigned index, struct pnfs_osd_objid *pooid, + int osd_error, u64 offset, u64 length, bool is_write); + extern void objlayout_read_done(struct objlayout_io_state *state, ssize_t status, bool sync); extern void objlayout_write_done(struct objlayout_io_state *state, @@ -131,4 +149,9 @@ extern enum pnfs_try_status objlayout_write_pagelist( struct nfs_write_data *, int how); +extern void objlayout_encode_layoutreturn( + struct pnfs_layout_hdr *, + struct xdr_stream *, + const struct nfs4_layoutreturn_args *); + #endif /* _OBJLAYOUT_H */ -- cgit v1.2.3 From ac7db7264ac3314cae09893bc838fcb7e83267a4 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Sun, 22 May 2011 19:53:48 +0300 Subject: pnfs: encode_layoutcommit Add a layout driver method to encode the layout type specific opaque part of layout commit in-line in the xdr stream. Currently, the pnfs-objects layout driver uses it to encode metadata hints to the MDS and the blocks layout driver to commit provisionally allocated extents to the file. Signed-off-by: Benny Halevy --- fs/nfs/nfs4xdr.c | 16 +++++++++++++--- fs/nfs/pnfs.h | 4 ++++ 2 files changed, 17 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index d464badc0067..d869a5e5464b 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -1875,6 +1875,7 @@ encode_layoutget(struct xdr_stream *xdr, static int encode_layoutcommit(struct xdr_stream *xdr, + struct inode *inode, const struct nfs4_layoutcommit_args *args, struct compound_hdr *hdr) { @@ -1883,7 +1884,7 @@ encode_layoutcommit(struct xdr_stream *xdr, dprintk("%s: lbw: %llu type: %d\n", __func__, args->lastbytewritten, NFS_SERVER(args->inode)->pnfs_curr_ld->id); - p = reserve_space(xdr, 48 + NFS4_STATEID_SIZE); + p = reserve_space(xdr, 44 + NFS4_STATEID_SIZE); *p++ = cpu_to_be32(OP_LAYOUTCOMMIT); /* Only whole file layouts */ p = xdr_encode_hyper(p, 0); /* offset */ @@ -1894,7 +1895,14 @@ encode_layoutcommit(struct xdr_stream *xdr, p = xdr_encode_hyper(p, args->lastbytewritten); *p++ = cpu_to_be32(0); /* Never send time_modify_changed */ *p++ = cpu_to_be32(NFS_SERVER(args->inode)->pnfs_curr_ld->id);/* type */ - *p++ = cpu_to_be32(0); /* no file layout payload */ + + if (NFS_SERVER(inode)->pnfs_curr_ld->encode_layoutcommit) + NFS_SERVER(inode)->pnfs_curr_ld->encode_layoutcommit( + NFS_I(inode)->layout, xdr, args); + else { + p = reserve_space(xdr, 4); + *p = cpu_to_be32(0); /* no layout-type payload */ + } hdr->nops++; hdr->replen += decode_layoutcommit_maxsz; @@ -2751,6 +2759,8 @@ static void nfs4_xdr_enc_layoutcommit(struct rpc_rqst *req, struct xdr_stream *xdr, struct nfs4_layoutcommit_args *args) { + struct nfs4_layoutcommit_data *data = + container_of(args, struct nfs4_layoutcommit_data, args); struct compound_hdr hdr = { .minorversion = nfs4_xdr_minorversion(&args->seq_args), }; @@ -2758,7 +2768,7 @@ static void nfs4_xdr_enc_layoutcommit(struct rpc_rqst *req, encode_compound_hdr(xdr, req, &hdr); encode_sequence(xdr, &args->seq_args, &hdr); encode_putfh(xdr, NFS_FH(args->inode), &hdr); - encode_layoutcommit(xdr, args, &hdr); + encode_layoutcommit(xdr, data->args.inode, args, &hdr); encode_getfattr(xdr, args->bitmask, &hdr); encode_nops(&hdr); } diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 1b6b207a8806..3fda97146777 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -108,6 +108,10 @@ struct pnfs_layoutdriver_type { void (*encode_layoutreturn) (struct pnfs_layout_hdr *layoutid, struct xdr_stream *xdr, const struct nfs4_layoutreturn_args *args); + + void (*encode_layoutcommit) (struct pnfs_layout_hdr *layoutid, + struct xdr_stream *xdr, + const struct nfs4_layoutcommit_args *args); }; struct pnfs_layout_hdr { -- cgit v1.2.3 From a0fe8bf427f4987d7b82678292ca03cfd7331467 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 22 May 2011 19:54:13 +0300 Subject: pnfs-obj: objlayout_encode_layoutcommit implementation * Define API for io-engines to report delta_space_used in IOs * Encode the osd-layout specific information of the layoutcommit XDR buffer. Signed-off-by: Boaz Harrosh Signed-off-by: Benny Halevy --- fs/nfs/objlayout/objio_osd.c | 1 + fs/nfs/objlayout/objlayout.c | 30 ++++++++++++++++++++++++++++++ fs/nfs/objlayout/objlayout.h | 30 ++++++++++++++++++++++++++++++ 3 files changed, 61 insertions(+) diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 8bca5e13f3ef..3be124160e97 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -1018,6 +1018,7 @@ static struct pnfs_layoutdriver_type objlayout_type = { .free_deviceid_node = objio_free_deviceid_node, + .encode_layoutcommit = objlayout_encode_layoutcommit, .encode_layoutreturn = objlayout_encode_layoutreturn, }; diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c index f7caecff6b4d..dc3956c0de80 100644 --- a/fs/nfs/objlayout/objlayout.c +++ b/fs/nfs/objlayout/objlayout.c @@ -225,6 +225,7 @@ objlayout_iodone(struct objlayout_io_state *state) struct objlayout *objlay = OBJLAYOUT(state->lseg->pls_layout); spin_lock(&objlay->lock); + objlay->delta_space_valid = OBJ_DSU_INVALID; list_add(&objlay->err_list, &state->err_list); spin_unlock(&objlay->lock); } @@ -433,6 +434,35 @@ objlayout_write_pagelist(struct nfs_write_data *wdata, return PNFS_ATTEMPTED; } +void +objlayout_encode_layoutcommit(struct pnfs_layout_hdr *pnfslay, + struct xdr_stream *xdr, + const struct nfs4_layoutcommit_args *args) +{ + struct objlayout *objlay = OBJLAYOUT(pnfslay); + struct pnfs_osd_layoutupdate lou; + __be32 *start; + + dprintk("%s: Begin\n", __func__); + + spin_lock(&objlay->lock); + lou.dsu_valid = (objlay->delta_space_valid == OBJ_DSU_VALID); + lou.dsu_delta = objlay->delta_space_used; + objlay->delta_space_used = 0; + objlay->delta_space_valid = OBJ_DSU_INIT; + lou.olu_ioerr_flag = !list_empty(&objlay->err_list); + spin_unlock(&objlay->lock); + + start = xdr_reserve_space(xdr, 4); + + BUG_ON(pnfs_osd_xdr_encode_layoutupdate(xdr, &lou)); + + *start = cpu_to_be32((xdr->p - start - 1) * 4); + + dprintk("%s: Return delta_space_used %lld err %d\n", __func__, + lou.dsu_delta, lou.olu_ioerr_flag); +} + static int err_prio(u32 oer_errno) { diff --git a/fs/nfs/objlayout/objlayout.h b/fs/nfs/objlayout/objlayout.h index b0bb975058e4..a8244c8e042d 100644 --- a/fs/nfs/objlayout/objlayout.h +++ b/fs/nfs/objlayout/objlayout.h @@ -51,6 +51,14 @@ struct objlayout { struct pnfs_layout_hdr pnfs_layout; + /* for layout_commit */ + enum osd_delta_space_valid_enum { + OBJ_DSU_INIT = 0, + OBJ_DSU_VALID, + OBJ_DSU_INVALID, + } delta_space_valid; + s64 delta_space_used; /* consumed by write ops */ + /* for layout_return */ spinlock_t lock; struct list_head err_list; @@ -119,6 +127,23 @@ extern void objlayout_io_set_result(struct objlayout_io_state *state, unsigned index, struct pnfs_osd_objid *pooid, int osd_error, u64 offset, u64 length, bool is_write); +static inline void +objlayout_add_delta_space_used(struct objlayout_io_state *state, s64 space_used) +{ + struct objlayout *objlay = OBJLAYOUT(state->lseg->pls_layout); + + /* If one of the I/Os errored out and the delta_space_used was + * invalid we render the complete report as invalid. Protocol mandate + * the DSU be accurate or not reported. + */ + spin_lock(&objlay->lock); + if (objlay->delta_space_valid != OBJ_DSU_INVALID) { + objlay->delta_space_valid = OBJ_DSU_VALID; + objlay->delta_space_used += space_used; + } + spin_unlock(&objlay->lock); +} + extern void objlayout_read_done(struct objlayout_io_state *state, ssize_t status, bool sync); extern void objlayout_write_done(struct objlayout_io_state *state, @@ -149,6 +174,11 @@ extern enum pnfs_try_status objlayout_write_pagelist( struct nfs_write_data *, int how); +extern void objlayout_encode_layoutcommit( + struct pnfs_layout_hdr *, + struct xdr_stream *, + const struct nfs4_layoutcommit_args *); + extern void objlayout_encode_layoutreturn( struct pnfs_layout_hdr *, struct xdr_stream *, -- cgit v1.2.3 From dfed206b8857d41a91ebba030f99e30017a44dda Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Wed, 25 May 2011 20:25:22 +0300 Subject: NFSv4.1: unify pnfs_pageio_init functions Use common code for pnfs_pageio_init_{read,write} and use a common generic pg_test function. Note that this function always assumes the the layout driver's pg_test method is implemented. [Fix BUG] Signed-off-by: Boaz Harrosh Signed-off-by: Benny Halevy --- fs/nfs/pagelist.c | 2 ++ fs/nfs/pnfs.c | 55 +++++++++++++++---------------------------------------- fs/nfs/pnfs.h | 21 ++++++++++----------- fs/nfs/read.c | 1 - fs/nfs/write.c | 2 -- 5 files changed, 27 insertions(+), 54 deletions(-) diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index c80add6e2213..b8704fedcd16 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -229,6 +229,8 @@ void nfs_pageio_init(struct nfs_pageio_descriptor *desc, desc->pg_ioflags = io_flags; desc->pg_error = 0; desc->pg_lseg = NULL; + desc->pg_test = NULL; + pnfs_pageio_init(desc, inode); } /** diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 00b128241746..568ab0eef677 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1043,46 +1043,30 @@ out_forget_reply: goto out; } -static int pnfs_read_pg_test(struct nfs_pageio_descriptor *pgio, - struct nfs_page *prev, - struct nfs_page *req) -{ - if (pgio->pg_count == prev->wb_bytes) { - /* This is first coelesce call for a series of nfs_pages */ - pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode, - prev->wb_context, - req_offset(req), - pgio->pg_count, - IOMODE_READ, - GFP_KERNEL); - } else if (pgio->pg_lseg && - req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset, - pgio->pg_lseg->pls_range.length)) - return 0; - return NFS_SERVER(pgio->pg_inode)->pnfs_curr_ld->pg_test(pgio, prev, req); -} - -void -pnfs_pageio_init_read(struct nfs_pageio_descriptor *pgio, struct inode *inode) +int +pnfs_generic_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, + struct nfs_page *req) { - struct pnfs_layoutdriver_type *ld; + enum pnfs_iomode access_type; + gfp_t gfp_flags; - ld = NFS_SERVER(inode)->pnfs_curr_ld; - pgio->pg_test = (ld && ld->pg_test) ? pnfs_read_pg_test : NULL; -} + /* We assume that pg_ioflags == 0 iff we're reading a page */ + if (pgio->pg_ioflags == 0) { + access_type = IOMODE_READ; + gfp_flags = GFP_KERNEL; + } else { + access_type = IOMODE_RW; + gfp_flags = GFP_NOFS; + } -static int pnfs_write_pg_test(struct nfs_pageio_descriptor *pgio, - struct nfs_page *prev, - struct nfs_page *req) -{ if (pgio->pg_count == prev->wb_bytes) { /* This is first coelesce call for a series of nfs_pages */ pgio->pg_lseg = pnfs_update_layout(pgio->pg_inode, prev->wb_context, req_offset(req), pgio->pg_count, - IOMODE_RW, - GFP_NOFS); + access_type, + gfp_flags); } else if (pgio->pg_lseg && req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset, pgio->pg_lseg->pls_range.length)) @@ -1090,15 +1074,6 @@ static int pnfs_write_pg_test(struct nfs_pageio_descriptor *pgio, return NFS_SERVER(pgio->pg_inode)->pnfs_curr_ld->pg_test(pgio, prev, req); } -void -pnfs_pageio_init_write(struct nfs_pageio_descriptor *pgio, struct inode *inode) -{ - struct pnfs_layoutdriver_type *ld; - - ld = NFS_SERVER(inode)->pnfs_curr_ld; - pgio->pg_test = (ld && ld->pg_test) ? pnfs_write_pg_test : NULL; -} - /* * Called by non rpc-based layout drivers */ diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 3fda97146777..c056688ee92b 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -158,8 +158,7 @@ enum pnfs_try_status pnfs_try_to_write_data(struct nfs_write_data *, const struct rpc_call_ops *, int); enum pnfs_try_status pnfs_try_to_read_data(struct nfs_read_data *, const struct rpc_call_ops *); -void pnfs_pageio_init_read(struct nfs_pageio_descriptor *, struct inode *); -void pnfs_pageio_init_write(struct nfs_pageio_descriptor *, struct inode *); +int pnfs_generic_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, struct nfs_page *req); int pnfs_layout_process(struct nfs4_layoutget *lgp); void pnfs_free_lseg_list(struct list_head *tmp_list); void pnfs_destroy_layout(struct nfs_inode *); @@ -293,6 +292,13 @@ static inline int pnfs_return_layout(struct inode *ino) return 0; } +static inline void pnfs_pageio_init(struct nfs_pageio_descriptor *pgio, + struct inode *inode) +{ + if (NFS_SERVER(inode)->pnfs_curr_ld) + pgio->pg_test = pnfs_generic_pg_test; +} + #else /* CONFIG_NFS_V4_1 */ static inline void pnfs_destroy_all_layouts(struct nfs_client *clp) @@ -376,16 +382,9 @@ static inline void unset_pnfs_layoutdriver(struct nfs_server *s) { } -static inline void -pnfs_pageio_init_read(struct nfs_pageio_descriptor *pgio, struct inode *ino) -{ - pgio->pg_test = NULL; -} - -static inline void -pnfs_pageio_init_write(struct nfs_pageio_descriptor *pgio, struct inode *ino) +static inline void pnfs_pageio_init(struct nfs_pageio_descriptor *pgio, + struct inode *inode) { - pgio->pg_test = NULL; } static inline void diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 540c8bc93f95..20a7f952e244 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -664,7 +664,6 @@ int nfs_readpages(struct file *filp, struct address_space *mapping, if (ret == 0) goto read_complete; /* all pages were read */ - pnfs_pageio_init_read(&pgio, inode); if (rsize < PAGE_CACHE_SIZE) nfs_pageio_init(&pgio, inode, nfs_pagein_multi, rsize, 0); else diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 7edb72f27c22..e268e3b23497 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1036,8 +1036,6 @@ static void nfs_pageio_init_write(struct nfs_pageio_descriptor *pgio, { size_t wsize = NFS_SERVER(inode)->wsize; - pnfs_pageio_init_write(pgio, inode); - if (wsize < PAGE_CACHE_SIZE) nfs_pageio_init(pgio, inode, nfs_flush_multi, wsize, ioflags); else -- cgit v1.2.3 From 18ad0a9f2ccd260d37dd6bc5fa04c7819def4c84 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Wed, 25 May 2011 21:03:56 +0300 Subject: NFSv4.1: change pg_test return type to bool Signed-off-by: Benny Halevy --- fs/nfs/nfs4filelayout.c | 6 +++--- fs/nfs/objlayout/objio_osd.c | 7 +++---- fs/nfs/pagelist.c | 22 +++++++++++----------- fs/nfs/pnfs.c | 4 ++-- fs/nfs/pnfs.h | 4 ++-- include/linux/nfs_page.h | 2 +- 6 files changed, 22 insertions(+), 23 deletions(-) diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 33bda24e8cd2..24f05720daf1 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -651,10 +651,10 @@ filelayout_alloc_lseg(struct pnfs_layout_hdr *layoutid, /* * filelayout_pg_test(). Called by nfs_can_coalesce_requests() * - * return 1 : coalesce page - * return 0 : don't coalesce page + * return true : coalesce page + * return false : don't coalesce page */ -int +bool filelayout_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, struct nfs_page *req) { diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 3be124160e97..8c2bd3eb8e8d 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -991,14 +991,13 @@ ssize_t objio_write_pagelist(struct objlayout_io_state *ol_state, bool stable) /* * objlayout_pg_test(). Called by nfs_can_coalesce_requests() * - * return 1 : coalesce page - * return 0 : don't coalesce page + * return true iff coalesce page */ -int +bool objlayout_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, struct nfs_page *req) { - return 1; + return true; } static struct pnfs_layoutdriver_type objlayout_type = { diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index b8704fedcd16..5344371a257c 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -244,29 +244,29 @@ void nfs_pageio_init(struct nfs_pageio_descriptor *desc, * * Return 'true' if this is the case, else return 'false'. */ -static int nfs_can_coalesce_requests(struct nfs_page *prev, - struct nfs_page *req, - struct nfs_pageio_descriptor *pgio) +static bool nfs_can_coalesce_requests(struct nfs_page *prev, + struct nfs_page *req, + struct nfs_pageio_descriptor *pgio) { if (req->wb_context->cred != prev->wb_context->cred) - return 0; + return false; if (req->wb_lock_context->lockowner != prev->wb_lock_context->lockowner) - return 0; + return false; if (req->wb_context->state != prev->wb_context->state) - return 0; + return false; if (req->wb_index != (prev->wb_index + 1)) - return 0; + return false; if (req->wb_pgbase != 0) - return 0; + return false; if (prev->wb_pgbase + prev->wb_bytes != PAGE_CACHE_SIZE) - return 0; + return false; /* * Non-whole file layouts need to check that req is inside of * pgio->pg_lseg. */ if (pgio->pg_test && !pgio->pg_test(pgio, prev, req)) - return 0; - return 1; + return false; + return true; } /** diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 568ab0eef677..212fc292761a 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1043,7 +1043,7 @@ out_forget_reply: goto out; } -int +bool pnfs_generic_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, struct nfs_page *req) { @@ -1070,7 +1070,7 @@ pnfs_generic_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, } else if (pgio->pg_lseg && req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset, pgio->pg_lseg->pls_range.length)) - return 0; + return false; return NFS_SERVER(pgio->pg_inode)->pnfs_curr_ld->pg_test(pgio, prev, req); } diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index c056688ee92b..65daae59c8ae 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -87,7 +87,7 @@ struct pnfs_layoutdriver_type { void (*free_lseg) (struct pnfs_layout_segment *lseg); /* test for nfs page cache coalescing */ - int (*pg_test)(struct nfs_pageio_descriptor *, struct nfs_page *, struct nfs_page *); + bool (*pg_test)(struct nfs_pageio_descriptor *, struct nfs_page *, struct nfs_page *); /* Returns true if layoutdriver wants to divert this request to * driver's commit routine. @@ -158,7 +158,7 @@ enum pnfs_try_status pnfs_try_to_write_data(struct nfs_write_data *, const struct rpc_call_ops *, int); enum pnfs_try_status pnfs_try_to_read_data(struct nfs_read_data *, const struct rpc_call_ops *); -int pnfs_generic_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, struct nfs_page *req); +bool pnfs_generic_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, struct nfs_page *req); int pnfs_layout_process(struct nfs4_layoutget *lgp); void pnfs_free_lseg_list(struct list_head *tmp_list); void pnfs_destroy_layout(struct nfs_inode *); diff --git a/include/linux/nfs_page.h b/include/linux/nfs_page.h index 91af2e49fa3a..3a34e80ae92f 100644 --- a/include/linux/nfs_page.h +++ b/include/linux/nfs_page.h @@ -68,7 +68,7 @@ struct nfs_pageio_descriptor { int pg_ioflags; int pg_error; struct pnfs_layout_segment *pg_lseg; - int (*pg_test)(struct nfs_pageio_descriptor *, struct nfs_page *, struct nfs_page *); + bool (*pg_test)(struct nfs_pageio_descriptor *, struct nfs_page *, struct nfs_page *); }; #define NFS_WBACK_BUSY(req) (test_bit(PG_BUSY,&(req)->wb_flags)) -- cgit v1.2.3 From 89a58e32d9105c01022a757fb32ddc3b51bf0025 Mon Sep 17 00:00:00 2001 From: Benny Halevy Date: Wed, 25 May 2011 20:54:40 +0300 Subject: NFSv4.1: use pnfs_generic_pg_test directly by layout driver Signed-off-by: Benny Halevy --- fs/nfs/nfs4filelayout.c | 3 +++ fs/nfs/objlayout/objio_osd.c | 14 +------------- fs/nfs/pnfs.c | 13 +++++++++---- fs/nfs/pnfs.h | 6 ++++-- 4 files changed, 17 insertions(+), 19 deletions(-) diff --git a/fs/nfs/nfs4filelayout.c b/fs/nfs/nfs4filelayout.c index 24f05720daf1..426908809c97 100644 --- a/fs/nfs/nfs4filelayout.c +++ b/fs/nfs/nfs4filelayout.c @@ -661,6 +661,9 @@ filelayout_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, u64 p_stripe, r_stripe; u32 stripe_unit; + if (!pnfs_generic_pg_test(pgio, prev, req)) + return 0; + if (!pgio->pg_lseg) return 1; p_stripe = (u64)prev->wb_index << PAGE_CACHE_SHIFT; diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 8c2bd3eb8e8d..3b10d09e5210 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -988,18 +988,6 @@ ssize_t objio_write_pagelist(struct objlayout_io_state *ol_state, bool stable) return _write_exec(ios); } -/* - * objlayout_pg_test(). Called by nfs_can_coalesce_requests() - * - * return true iff coalesce page - */ -bool -objlayout_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, - struct nfs_page *req) -{ - return true; -} - static struct pnfs_layoutdriver_type objlayout_type = { .id = LAYOUT_OSD2_OBJECTS, .name = "LAYOUT_OSD2_OBJECTS", @@ -1013,7 +1001,7 @@ static struct pnfs_layoutdriver_type objlayout_type = { .read_pagelist = objlayout_read_pagelist, .write_pagelist = objlayout_write_pagelist, - .pg_test = objlayout_pg_test, + .pg_test = pnfs_generic_pg_test, .free_deviceid_node = objio_free_deviceid_node, diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 212fc292761a..d79f2df33a46 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -1067,12 +1067,17 @@ pnfs_generic_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev, pgio->pg_count, access_type, gfp_flags); - } else if (pgio->pg_lseg && - req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset, - pgio->pg_lseg->pls_range.length)) + return true; + } + + if (pgio->pg_lseg && + req_offset(req) > end_offset(pgio->pg_lseg->pls_range.offset, + pgio->pg_lseg->pls_range.length)) return false; - return NFS_SERVER(pgio->pg_inode)->pnfs_curr_ld->pg_test(pgio, prev, req); + + return true; } +EXPORT_SYMBOL_GPL(pnfs_generic_pg_test); /* * Called by non rpc-based layout drivers diff --git a/fs/nfs/pnfs.h b/fs/nfs/pnfs.h index 65daae59c8ae..48d0a8e4d062 100644 --- a/fs/nfs/pnfs.h +++ b/fs/nfs/pnfs.h @@ -295,8 +295,10 @@ static inline int pnfs_return_layout(struct inode *ino) static inline void pnfs_pageio_init(struct nfs_pageio_descriptor *pgio, struct inode *inode) { - if (NFS_SERVER(inode)->pnfs_curr_ld) - pgio->pg_test = pnfs_generic_pg_test; + struct pnfs_layoutdriver_type *ld = NFS_SERVER(inode)->pnfs_curr_ld; + + if (ld) + pgio->pg_test = ld->pg_test; } #else /* CONFIG_NFS_V4_1 */ -- cgit v1.2.3 From 5b36c7dc41d87d39e779a84fdc2b44b39bba32ca Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Sun, 29 May 2011 11:45:39 +0300 Subject: NFSv4.1: define nfs_generic_pg_test By default, unless pnfs is used coalesce pages until pg_bsize (rsize or wsize) is reached. pnfs layout drivers define their own pg_test methods that use pnfs_generic_pg_test and need to define their own I/O size limits (e.g. based on the file stripe size). [Move a check from nfs_pageio_do_add_request to nfs_generic_pg_test] Signed-off-by: Boaz Harrosh Signed-off-by: Benny Halevy --- fs/nfs/pagelist.c | 44 ++++++++++++++++++++------------------------ 1 file changed, 20 insertions(+), 24 deletions(-) diff --git a/fs/nfs/pagelist.c b/fs/nfs/pagelist.c index 5344371a257c..7913961aff22 100644 --- a/fs/nfs/pagelist.c +++ b/fs/nfs/pagelist.c @@ -204,6 +204,21 @@ nfs_wait_on_request(struct nfs_page *req) TASK_UNINTERRUPTIBLE); } +static bool nfs_generic_pg_test(struct nfs_pageio_descriptor *desc, struct nfs_page *prev, struct nfs_page *req) +{ + /* + * FIXME: ideally we should be able to coalesce all requests + * that are not block boundary aligned, but currently this + * is problematic for the case of bsize < PAGE_CACHE_SIZE, + * since nfs_flush_multi and nfs_pagein_multi assume you + * can have only one struct nfs_page. + */ + if (desc->pg_bsize < PAGE_SIZE) + return 0; + + return desc->pg_count + req->wb_bytes <= desc->pg_bsize; +} + /** * nfs_pageio_init - initialise a page io descriptor * @desc: pointer to descriptor @@ -229,7 +244,7 @@ void nfs_pageio_init(struct nfs_pageio_descriptor *desc, desc->pg_ioflags = io_flags; desc->pg_error = 0; desc->pg_lseg = NULL; - desc->pg_test = NULL; + desc->pg_test = nfs_generic_pg_test; pnfs_pageio_init(desc, inode); } @@ -260,13 +275,7 @@ static bool nfs_can_coalesce_requests(struct nfs_page *prev, return false; if (prev->wb_pgbase + prev->wb_bytes != PAGE_CACHE_SIZE) return false; - /* - * Non-whole file layouts need to check that req is inside of - * pgio->pg_lseg. - */ - if (pgio->pg_test && !pgio->pg_test(pgio, prev, req)) - return false; - return true; + return pgio->pg_test(pgio, prev, req); } /** @@ -280,31 +289,18 @@ static bool nfs_can_coalesce_requests(struct nfs_page *prev, static int nfs_pageio_do_add_request(struct nfs_pageio_descriptor *desc, struct nfs_page *req) { - size_t newlen = req->wb_bytes; - if (desc->pg_count != 0) { struct nfs_page *prev; - /* - * FIXME: ideally we should be able to coalesce all requests - * that are not block boundary aligned, but currently this - * is problematic for the case of bsize < PAGE_CACHE_SIZE, - * since nfs_flush_multi and nfs_pagein_multi assume you - * can have only one struct nfs_page. - */ - if (desc->pg_bsize < PAGE_SIZE) - return 0; - newlen += desc->pg_count; - if (newlen > desc->pg_bsize) - return 0; prev = nfs_list_entry(desc->pg_list.prev); if (!nfs_can_coalesce_requests(prev, req, desc)) return 0; - } else + } else { desc->pg_base = req->wb_pgbase; + } nfs_list_remove_request(req); nfs_list_add_request(req, &desc->pg_list); - desc->pg_count = newlen; + desc->pg_count += req->wb_bytes; return 1; } -- cgit v1.2.3 From 9342077011d54f42fa1b88b7bc1f7008dcf5fff9 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 25 May 2011 21:25:29 +0300 Subject: pnfs-obj: pg_test check for max_io_size Implement pg_test vector to test for max IO sizes. We calculate a max_io_size member only once, and cache it in lseg so to not do so on every page insert. Signed-off-by: Boaz Harrosh [simplify logic] Signed-off-by: Benny Halevy --- fs/nfs/objlayout/objio_osd.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/fs/nfs/objlayout/objio_osd.c b/fs/nfs/objlayout/objio_osd.c index 3b10d09e5210..9cf208df1f25 100644 --- a/fs/nfs/objlayout/objio_osd.c +++ b/fs/nfs/objlayout/objio_osd.c @@ -128,6 +128,8 @@ struct objio_segment { u64 group_depth; unsigned group_count; + unsigned max_io_size; + unsigned comps_index; unsigned num_comps; /* variable length */ @@ -365,6 +367,11 @@ int objio_alloc_lseg(struct pnfs_layout_segment **outp, objio_seg->group_count = 1; } + /* Cache this calculation it will hit for every page */ + objio_seg->max_io_size = (BIO_MAX_PAGES_KMALLOC * PAGE_SIZE - + objio_seg->stripe_unit) * + objio_seg->group_width; + *outp = &objio_seg->lseg; return 0; @@ -988,6 +995,16 @@ ssize_t objio_write_pagelist(struct objlayout_io_state *ol_state, bool stable) return _write_exec(ios); } +static bool objio_pg_test(struct nfs_pageio_descriptor *pgio, + struct nfs_page *prev, struct nfs_page *req) +{ + if (!pnfs_generic_pg_test(pgio, prev, req)) + return false; + + return pgio->pg_count + req->wb_bytes <= + OBJIO_LSEG(pgio->pg_lseg)->max_io_size; +} + static struct pnfs_layoutdriver_type objlayout_type = { .id = LAYOUT_OSD2_OBJECTS, .name = "LAYOUT_OSD2_OBJECTS", @@ -1001,7 +1018,7 @@ static struct pnfs_layoutdriver_type objlayout_type = { .read_pagelist = objlayout_read_pagelist, .write_pagelist = objlayout_write_pagelist, - .pg_test = pnfs_generic_pg_test, + .pg_test = objio_pg_test, .free_deviceid_node = objio_free_deviceid_node, -- cgit v1.2.3 From ef1d57599dc904fdb31b8e9b5336350d21a1fde1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 29 May 2011 13:46:08 +0100 Subject: cifs/ubifs: Fix shrinker API change fallout Commit 1495f230fa77 ("vmscan: change shrinker API by passing shrink_control struct") changed the API of ->shrink(), but missed ubifs and cifs instances. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- fs/cifs/cifsacl.c | 3 ++- fs/ubifs/shrinker.c | 3 ++- fs/ubifs/ubifs.h | 2 +- 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/cifs/cifsacl.c b/fs/cifs/cifsacl.c index 8f1700623b41..21de1d6d5849 100644 --- a/fs/cifs/cifsacl.c +++ b/fs/cifs/cifsacl.c @@ -74,8 +74,9 @@ shrink_idmap_tree(struct rb_root *root, int nr_to_scan, int *nr_rem, * Run idmap cache shrinker. */ static int -cifs_idmap_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask) +cifs_idmap_shrinker(struct shrinker *shrink, struct shrink_control *sc) { + int nr_to_scan = sc->nr_to_scan; int nr_del = 0; int nr_rem = 0; struct rb_root *root; diff --git a/fs/ubifs/shrinker.c b/fs/ubifs/shrinker.c index 46961c003236..ca953a945029 100644 --- a/fs/ubifs/shrinker.c +++ b/fs/ubifs/shrinker.c @@ -277,8 +277,9 @@ static int kick_a_thread(void) return 0; } -int ubifs_shrinker(struct shrinker *shrink, int nr, gfp_t gfp_mask) +int ubifs_shrinker(struct shrinker *shrink, struct shrink_control *sc) { + int nr = sc->nr_to_scan; int freed, contention = 0; long clean_zn_cnt = atomic_long_read(&ubifs_clean_zn_cnt); diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index 93d1412a06f0..a70d7b4ffb25 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -1614,7 +1614,7 @@ int ubifs_tnc_start_commit(struct ubifs_info *c, struct ubifs_zbranch *zroot); int ubifs_tnc_end_commit(struct ubifs_info *c); /* shrinker.c */ -int ubifs_shrinker(struct shrinker *shrink, int nr_to_scan, gfp_t gfp_mask); +int ubifs_shrinker(struct shrinker *shrink, struct shrink_control *sc); /* commit.c */ int ubifs_bg_thread(void *info); -- cgit v1.2.3 From 6345d24daf0c1fffe6642081d783cdf653ebaa5c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 May 2011 11:32:28 -0700 Subject: mm: Fix boot crash in mm_alloc() Thomas Gleixner reports that we now have a boot crash triggered by CONFIG_CPUMASK_OFFSTACK=y: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] find_next_bit+0x55/0xb0 Call Trace: [] cpumask_any_but+0x2a/0x70 [] flush_tlb_mm+0x2b/0x80 [] pud_populate+0x35/0x50 [] pgd_alloc+0x9a/0xf0 [] mm_init+0xec/0x120 [] mm_alloc+0x53/0xd0 which was introduced by commit de03c72cfce5 ("mm: convert mm->cpu_vm_cpumask into cpumask_var_t"), and is due to wrong ordering of mm_init() vs mm_init_cpumask Thomas wrote a patch to just fix the ordering of initialization, but I hate the new double allocation in the fork path, so I ended up instead doing some more radical surgery to clean it all up. Reported-by: Thomas Gleixner Reported-by: Ingo Molnar Cc: KOSAKI Motohiro Cc: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mm_types.h | 14 ++++++++++++-- include/linux/sched.h | 1 - init/main.c | 2 +- kernel/fork.c | 42 ++++++++++-------------------------------- 4 files changed, 23 insertions(+), 36 deletions(-) diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 2a78aae78c69..027935c86c68 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -264,6 +264,8 @@ struct mm_struct { struct linux_binfmt *binfmt; + cpumask_var_t cpu_vm_mask_var; + /* Architecture-specific MM context */ mm_context_t context; @@ -311,10 +313,18 @@ struct mm_struct { #ifdef CONFIG_TRANSPARENT_HUGEPAGE pgtable_t pmd_huge_pte; /* protected by page_table_lock */ #endif - - cpumask_var_t cpu_vm_mask_var; +#ifdef CONFIG_CPUMASK_OFFSTACK + struct cpumask cpumask_allocation; +#endif }; +static inline void mm_init_cpumask(struct mm_struct *mm) +{ +#ifdef CONFIG_CPUMASK_OFFSTACK + mm->cpu_vm_mask_var = &mm->cpumask_allocation; +#endif +} + /* Future-safe accessor for struct mm_struct's cpu_vm_mask. */ static inline cpumask_t *mm_cpumask(struct mm_struct *mm) { diff --git a/include/linux/sched.h b/include/linux/sched.h index bcddd0138105..2a8621c4be1e 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2194,7 +2194,6 @@ static inline void mmdrop(struct mm_struct * mm) if (unlikely(atomic_dec_and_test(&mm->mm_count))) __mmdrop(mm); } -extern int mm_init_cpumask(struct mm_struct *mm, struct mm_struct *oldmm); /* mmput gets rid of the mappings and all user-space */ extern void mmput(struct mm_struct *); diff --git a/init/main.c b/init/main.c index d2f1e086bf33..cafba67c13bf 100644 --- a/init/main.c +++ b/init/main.c @@ -487,6 +487,7 @@ asmlinkage void __init start_kernel(void) printk(KERN_NOTICE "%s", linux_banner); setup_arch(&command_line); mm_init_owner(&init_mm, &init_task); + mm_init_cpumask(&init_mm); setup_command_line(command_line); setup_nr_cpu_ids(); setup_per_cpu_areas(); @@ -510,7 +511,6 @@ asmlinkage void __init start_kernel(void) sort_main_extable(); trap_init(); mm_init(); - BUG_ON(mm_init_cpumask(&init_mm, 0)); /* * Set up the scheduler prior starting any interrupts (such as the diff --git a/kernel/fork.c b/kernel/fork.c index ca406d916713..0276c30401a0 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -484,20 +484,6 @@ static void mm_init_aio(struct mm_struct *mm) #endif } -int mm_init_cpumask(struct mm_struct *mm, struct mm_struct *oldmm) -{ -#ifdef CONFIG_CPUMASK_OFFSTACK - if (!alloc_cpumask_var(&mm->cpu_vm_mask_var, GFP_KERNEL)) - return -ENOMEM; - - if (oldmm) - cpumask_copy(mm_cpumask(mm), mm_cpumask(oldmm)); - else - memset(mm_cpumask(mm), 0, cpumask_size()); -#endif - return 0; -} - static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p) { atomic_set(&mm->mm_users, 1); @@ -538,17 +524,8 @@ struct mm_struct * mm_alloc(void) return NULL; memset(mm, 0, sizeof(*mm)); - mm = mm_init(mm, current); - if (!mm) - return NULL; - - if (mm_init_cpumask(mm, NULL)) { - mm_free_pgd(mm); - free_mm(mm); - return NULL; - } - - return mm; + mm_init_cpumask(mm); + return mm_init(mm, current); } /* @@ -559,7 +536,6 @@ struct mm_struct * mm_alloc(void) void __mmdrop(struct mm_struct *mm) { BUG_ON(mm == &init_mm); - free_cpumask_var(mm->cpu_vm_mask_var); mm_free_pgd(mm); destroy_context(mm); mmu_notifier_mm_destroy(mm); @@ -753,6 +729,7 @@ struct mm_struct *dup_mm(struct task_struct *tsk) goto fail_nomem; memcpy(mm, oldmm, sizeof(*mm)); + mm_init_cpumask(mm); /* Initializing for Swap token stuff */ mm->token_priority = 0; @@ -765,9 +742,6 @@ struct mm_struct *dup_mm(struct task_struct *tsk) if (!mm_init(mm, tsk)) goto fail_nomem; - if (mm_init_cpumask(mm, oldmm)) - goto fail_nocpumask; - if (init_new_context(tsk, mm)) goto fail_nocontext; @@ -794,9 +768,6 @@ fail_nomem: return NULL; fail_nocontext: - free_cpumask_var(mm->cpu_vm_mask_var); - -fail_nocpumask: /* * If init_new_context() failed, we cannot use mmput() to free the mm * because it calls destroy_context() @@ -1591,6 +1562,13 @@ void __init proc_caches_init(void) fs_cachep = kmem_cache_create("fs_cache", sizeof(struct fs_struct), 0, SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK, NULL); + /* + * FIXME! The "sizeof(struct mm_struct)" currently includes the + * whole struct cpumask for the OFFSTACK case. We could change + * this to *only* allocate as much of it as required by the + * maximum number of CPU's we can ever have. The cpumask_allocation + * is at the end of the structure, exactly for that reason. + */ mm_cachep = kmem_cache_create("mm_struct", sizeof(struct mm_struct), ARCH_MIN_MMSTRUCT_ALIGN, SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_NOTRACK, NULL); -- cgit v1.2.3 From 3b06b3ebf44170c90c893c6c80916db6e922b9f2 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 24 May 2011 03:49:02 -0500 Subject: eCryptfs: Fix new inode race condition Only unlock and d_add() new inodes after the plaintext inode size has been read from the lower filesystem. This fixes a race condition that was sometimes seen during a multi-job kernel build in an eCryptfs mount. https://bugzilla.kernel.org/show_bug.cgi?id=36002 Signed-off-by: Tyler Hicks Reported-by: David Tested-by: David --- fs/ecryptfs/crypto.c | 4 ++-- fs/ecryptfs/ecryptfs_kernel.h | 4 ++-- fs/ecryptfs/file.c | 2 +- fs/ecryptfs/inode.c | 42 ++++++++++++++++++++++-------------------- fs/ecryptfs/main.c | 6 +++--- 5 files changed, 30 insertions(+), 28 deletions(-) diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index b8d5c8091024..f48c4987a15c 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -1568,11 +1568,11 @@ out: } int ecryptfs_read_and_validate_xattr_region(char *page_virt, - struct dentry *ecryptfs_dentry) + struct inode *inode) { int rc; - rc = ecryptfs_read_xattr_region(page_virt, ecryptfs_dentry->d_inode); + rc = ecryptfs_read_xattr_region(page_virt, inode); if (rc) goto out; if (!contains_ecryptfs_marker(page_virt + ECRYPTFS_FILE_SIZE_BYTES)) { diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 41a453236371..72aa24a4c71e 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -662,7 +662,7 @@ void ecryptfs_write_crypt_stat_flags(char *page_virt, int ecryptfs_read_and_validate_header_region(char *data, struct inode *ecryptfs_inode); int ecryptfs_read_and_validate_xattr_region(char *page_virt, - struct dentry *ecryptfs_dentry); + struct inode *inode); u8 ecryptfs_code_for_cipher_string(char *cipher_name, size_t key_bytes); int ecryptfs_cipher_code_to_string(char *str, u8 cipher_code); void ecryptfs_set_default_sizes(struct ecryptfs_crypt_stat *crypt_stat); @@ -753,7 +753,7 @@ int ecryptfs_privileged_open(struct file **lower_file, struct dentry *lower_dentry, struct vfsmount *lower_mnt, const struct cred *cred); -int ecryptfs_get_lower_file(struct dentry *ecryptfs_dentry); +int ecryptfs_get_lower_file(struct dentry *dentry, struct inode *inode); void ecryptfs_put_lower_file(struct inode *inode); int ecryptfs_write_tag_70_packet(char *dest, size_t *remaining_bytes, diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 566e5472f78c..4ec9eb00a241 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -191,7 +191,7 @@ static int ecryptfs_open(struct inode *inode, struct file *file) | ECRYPTFS_ENCRYPTED); } mutex_unlock(&crypt_stat->cs_mutex); - rc = ecryptfs_get_lower_file(ecryptfs_dentry); + rc = ecryptfs_get_lower_file(ecryptfs_dentry, inode); if (rc) { printk(KERN_ERR "%s: Error attempting to initialize " "the lower file for the dentry with name " diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index fc7d2b748503..f0ad965d7d51 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -259,7 +259,8 @@ static int ecryptfs_initialize_file(struct dentry *ecryptfs_dentry) "context; rc = [%d]\n", rc); goto out; } - rc = ecryptfs_get_lower_file(ecryptfs_dentry); + rc = ecryptfs_get_lower_file(ecryptfs_dentry, + ecryptfs_dentry->d_inode); if (rc) { printk(KERN_ERR "%s: Error attempting to initialize " "the lower file for the dentry with name " @@ -350,50 +351,51 @@ static int ecryptfs_lookup_interpose(struct dentry *ecryptfs_dentry, __func__, rc); goto out; } - if (inode->i_state & I_NEW) - unlock_new_inode(inode); - d_add(ecryptfs_dentry, inode); - if (S_ISDIR(lower_inode->i_mode)) - goto out; - if (S_ISLNK(lower_inode->i_mode)) - goto out; - if (special_file(lower_inode->i_mode)) + if (!S_ISREG(inode->i_mode)) { + if (inode->i_state & I_NEW) + unlock_new_inode(inode); + d_add(ecryptfs_dentry, inode); goto out; + } /* Released in this function */ page_virt = kmem_cache_zalloc(ecryptfs_header_cache_2, GFP_USER); if (!page_virt) { printk(KERN_ERR "%s: Cannot kmem_cache_zalloc() a page\n", __func__); rc = -ENOMEM; + make_bad_inode(inode); goto out; } - rc = ecryptfs_get_lower_file(ecryptfs_dentry); + rc = ecryptfs_get_lower_file(ecryptfs_dentry, inode); if (rc) { printk(KERN_ERR "%s: Error attempting to initialize " "the lower file for the dentry with name " "[%s]; rc = [%d]\n", __func__, ecryptfs_dentry->d_name.name, rc); + make_bad_inode(inode); goto out_free_kmem; } put_lower = 1; - crypt_stat = &ecryptfs_inode_to_private( - ecryptfs_dentry->d_inode)->crypt_stat; + crypt_stat = &ecryptfs_inode_to_private(inode)->crypt_stat; /* TODO: lock for crypt_stat comparison */ if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED)) ecryptfs_set_default_sizes(crypt_stat); - rc = ecryptfs_read_and_validate_header_region(page_virt, - ecryptfs_dentry->d_inode); + rc = ecryptfs_read_and_validate_header_region(page_virt, inode); if (rc) { memset(page_virt, 0, PAGE_CACHE_SIZE); rc = ecryptfs_read_and_validate_xattr_region(page_virt, - ecryptfs_dentry); + inode); if (rc) { rc = 0; - goto out_free_kmem; + goto unlock_inode; } crypt_stat->flags |= ECRYPTFS_METADATA_IN_XATTR; } - ecryptfs_i_size_init(page_virt, ecryptfs_dentry->d_inode); + ecryptfs_i_size_init(page_virt, inode); +unlock_inode: + if (inode->i_state & I_NEW) + unlock_new_inode(inode); + d_add(ecryptfs_dentry, inode); out_free_kmem: kmem_cache_free(ecryptfs_header_cache_2, page_virt); goto out; @@ -403,7 +405,7 @@ out_put: d_drop(ecryptfs_dentry); out: if (put_lower) - ecryptfs_put_lower_file(ecryptfs_dentry->d_inode); + ecryptfs_put_lower_file(inode); return rc; } @@ -843,7 +845,7 @@ static int truncate_upper(struct dentry *dentry, struct iattr *ia, lower_ia->ia_valid &= ~ATTR_SIZE; return 0; } - rc = ecryptfs_get_lower_file(dentry); + rc = ecryptfs_get_lower_file(dentry, inode); if (rc) return rc; crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat; @@ -999,7 +1001,7 @@ static int ecryptfs_setattr(struct dentry *dentry, struct iattr *ia) mount_crypt_stat = &ecryptfs_superblock_to_private( dentry->d_sb)->mount_crypt_stat; - rc = ecryptfs_get_lower_file(dentry); + rc = ecryptfs_get_lower_file(dentry, inode); if (rc) { mutex_unlock(&crypt_stat->cs_mutex); goto out; diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 7c697abab396..943a4f55ed6d 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -135,12 +135,12 @@ static int ecryptfs_init_lower_file(struct dentry *dentry, return rc; } -int ecryptfs_get_lower_file(struct dentry *dentry) +int ecryptfs_get_lower_file(struct dentry *dentry, struct inode *inode) { - struct ecryptfs_inode_info *inode_info = - ecryptfs_inode_to_private(dentry->d_inode); + struct ecryptfs_inode_info *inode_info; int count, rc = 0; + inode_info = ecryptfs_inode_to_private(inode); mutex_lock(&inode_info->lower_file_mutex); count = atomic_inc_return(&inode_info->lower_file_count); if (WARN_ON_ONCE(count < 1)) -- cgit v1.2.3 From 7a86617e553f47761b10f57de472d7262562b7de Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Mon, 2 May 2011 00:39:54 -0500 Subject: eCryptfs: Return useful code from contains_ecryptfs_marker Instead of having the calling functions translate the true/false return code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or -EINVAL so that the calling functions can just reuse the return code. Also, rename the function to ecryptfs_validate_marker() to avoid callers mistakenly thinking that it returns true/false codes. Signed-off-by: Tyler Hicks --- fs/ecryptfs/crypto.c | 26 ++++++++++---------------- 1 file changed, 10 insertions(+), 16 deletions(-) diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index f48c4987a15c..162f9baf9eb5 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -1024,25 +1024,25 @@ out: } /** - * contains_ecryptfs_marker - check for the ecryptfs marker + * ecryptfs_validate_marker - check for the ecryptfs marker * @data: The data block in which to check * - * Returns one if marker found; zero if not found + * Returns zero if marker found; -EINVAL if not found */ -static int contains_ecryptfs_marker(char *data) +static int ecryptfs_validate_marker(char *data) { u32 m_1, m_2; m_1 = get_unaligned_be32(data); m_2 = get_unaligned_be32(data + 4); if ((m_1 ^ MAGIC_ECRYPTFS_MARKER) == m_2) - return 1; + return 0; ecryptfs_printk(KERN_DEBUG, "m_1 = [0x%.8x]; m_2 = [0x%.8x]; " "MAGIC_ECRYPTFS_MARKER = [0x%.8x]\n", m_1, m_2, MAGIC_ECRYPTFS_MARKER); ecryptfs_printk(KERN_DEBUG, "(m_1 ^ MAGIC_ECRYPTFS_MARKER) = " "[0x%.8x]\n", (m_1 ^ MAGIC_ECRYPTFS_MARKER)); - return 0; + return -EINVAL; } struct ecryptfs_flag_map_elem { @@ -1217,10 +1217,7 @@ int ecryptfs_read_and_validate_header_region(char *data, __func__, rc); goto out; } - if (!contains_ecryptfs_marker(data + ECRYPTFS_FILE_SIZE_BYTES)) { - rc = -EINVAL; - } else - rc = 0; + rc = ecryptfs_validate_marker(data + ECRYPTFS_FILE_SIZE_BYTES); out: return rc; } @@ -1496,11 +1493,9 @@ static int ecryptfs_read_headers_virt(char *page_virt, crypt_stat->mount_crypt_stat = &ecryptfs_superblock_to_private( ecryptfs_dentry->d_sb)->mount_crypt_stat; offset = ECRYPTFS_FILE_SIZE_BYTES; - rc = contains_ecryptfs_marker(page_virt + offset); - if (rc == 0) { - rc = -EINVAL; + rc = ecryptfs_validate_marker(page_virt + offset); + if (rc) goto out; - } if (!(crypt_stat->flags & ECRYPTFS_I_SIZE_INITIALIZED)) ecryptfs_i_size_init(page_virt, ecryptfs_dentry->d_inode); offset += MAGIC_ECRYPTFS_MARKER_SIZE_BYTES; @@ -1575,11 +1570,10 @@ int ecryptfs_read_and_validate_xattr_region(char *page_virt, rc = ecryptfs_read_xattr_region(page_virt, inode); if (rc) goto out; - if (!contains_ecryptfs_marker(page_virt + ECRYPTFS_FILE_SIZE_BYTES)) { + rc = ecryptfs_validate_marker(page_virt + ECRYPTFS_FILE_SIZE_BYTES); + if (rc) printk(KERN_WARNING "Valid data found in [%s] xattr, but " "the marker is invalid\n", ECRYPTFS_XATTR_NAME); - rc = -EINVAL; - } out: return rc; } -- cgit v1.2.3 From 778aeb42a708d2a57e491d2cbb5a1e74f61270b9 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 24 May 2011 04:56:23 -0500 Subject: eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose() ecryptfs_lookup_interpose() has turned into spaghetti code over the years. This is an effort to clean it up. - Shorten overly descriptive variable names such as ecryptfs_dentry - Simplify gotos and error paths - Create helper function for reading plaintext i_size from metadata It also includes an optimization when reading i_size from the metadata. A complete page-sized kmem_cache_alloc() was being done to read in 16 bytes of metadata. The buffer for that is now statically declared. Signed-off-by: Tyler Hicks --- fs/ecryptfs/crypto.c | 45 +++++++------- fs/ecryptfs/ecryptfs_kernel.h | 7 ++- fs/ecryptfs/inode.c | 141 +++++++++++++++++++----------------------- 3 files changed, 88 insertions(+), 105 deletions(-) diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 162f9baf9eb5..66d8e6748a46 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -1201,24 +1201,19 @@ int ecryptfs_cipher_code_to_string(char *str, u8 cipher_code) return rc; } -int ecryptfs_read_and_validate_header_region(char *data, - struct inode *ecryptfs_inode) +int ecryptfs_read_and_validate_header_region(struct inode *inode) { - struct ecryptfs_crypt_stat *crypt_stat = - &(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat); + u8 file_size[ECRYPTFS_SIZE_AND_MARKER_BYTES]; + u8 *marker = file_size + ECRYPTFS_FILE_SIZE_BYTES; int rc; - if (crypt_stat->extent_size == 0) - crypt_stat->extent_size = ECRYPTFS_DEFAULT_EXTENT_SIZE; - rc = ecryptfs_read_lower(data, 0, crypt_stat->extent_size, - ecryptfs_inode); - if (rc < 0) { - printk(KERN_ERR "%s: Error reading header region; rc = [%d]\n", - __func__, rc); - goto out; - } - rc = ecryptfs_validate_marker(data + ECRYPTFS_FILE_SIZE_BYTES); -out: + rc = ecryptfs_read_lower(file_size, 0, ECRYPTFS_SIZE_AND_MARKER_BYTES, + inode); + if (rc < ECRYPTFS_SIZE_AND_MARKER_BYTES) + return rc >= 0 ? -EINVAL : rc; + rc = ecryptfs_validate_marker(marker); + if (!rc) + ecryptfs_i_size_init(file_size, inode); return rc; } @@ -1562,19 +1557,21 @@ out: return rc; } -int ecryptfs_read_and_validate_xattr_region(char *page_virt, +int ecryptfs_read_and_validate_xattr_region(struct dentry *dentry, struct inode *inode) { + u8 file_size[ECRYPTFS_SIZE_AND_MARKER_BYTES]; + u8 *marker = file_size + ECRYPTFS_FILE_SIZE_BYTES; int rc; - rc = ecryptfs_read_xattr_region(page_virt, inode); - if (rc) - goto out; - rc = ecryptfs_validate_marker(page_virt + ECRYPTFS_FILE_SIZE_BYTES); - if (rc) - printk(KERN_WARNING "Valid data found in [%s] xattr, but " - "the marker is invalid\n", ECRYPTFS_XATTR_NAME); -out: + rc = ecryptfs_getxattr_lower(ecryptfs_dentry_to_lower(dentry), + ECRYPTFS_XATTR_NAME, file_size, + ECRYPTFS_SIZE_AND_MARKER_BYTES); + if (rc < ECRYPTFS_SIZE_AND_MARKER_BYTES) + return rc >= 0 ? -EINVAL : rc; + rc = ecryptfs_validate_marker(marker); + if (!rc) + ecryptfs_i_size_init(file_size, inode); return rc; } diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 72aa24a4c71e..8297ddaca7c4 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -200,6 +200,8 @@ ecryptfs_get_key_payload_data(struct key *key) #define MAGIC_ECRYPTFS_MARKER 0x3c81b7f5 #define MAGIC_ECRYPTFS_MARKER_SIZE_BYTES 8 /* 4*2 */ #define ECRYPTFS_FILE_SIZE_BYTES (sizeof(u64)) +#define ECRYPTFS_SIZE_AND_MARKER_BYTES (ECRYPTFS_FILE_SIZE_BYTES \ + + MAGIC_ECRYPTFS_MARKER_SIZE_BYTES) #define ECRYPTFS_DEFAULT_CIPHER "aes" #define ECRYPTFS_DEFAULT_KEY_BYTES 16 #define ECRYPTFS_DEFAULT_HASH "md5" @@ -659,9 +661,8 @@ int ecryptfs_new_file_context(struct dentry *ecryptfs_dentry); void ecryptfs_write_crypt_stat_flags(char *page_virt, struct ecryptfs_crypt_stat *crypt_stat, size_t *written); -int ecryptfs_read_and_validate_header_region(char *data, - struct inode *ecryptfs_inode); -int ecryptfs_read_and_validate_xattr_region(char *page_virt, +int ecryptfs_read_and_validate_header_region(struct inode *inode); +int ecryptfs_read_and_validate_xattr_region(struct dentry *dentry, struct inode *inode); u8 ecryptfs_code_for_cipher_string(char *cipher_name, size_t key_bytes); int ecryptfs_cipher_code_to_string(char *str, u8 cipher_code); diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index f0ad965d7d51..7349ade17de6 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -307,105 +307,90 @@ out: return rc; } +static int ecryptfs_i_size_read(struct dentry *dentry, struct inode *inode) +{ + struct ecryptfs_crypt_stat *crypt_stat; + int rc; + + rc = ecryptfs_get_lower_file(dentry, inode); + if (rc) { + printk(KERN_ERR "%s: Error attempting to initialize " + "the lower file for the dentry with name " + "[%s]; rc = [%d]\n", __func__, + dentry->d_name.name, rc); + return rc; + } + + crypt_stat = &ecryptfs_inode_to_private(inode)->crypt_stat; + /* TODO: lock for crypt_stat comparison */ + if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED)) + ecryptfs_set_default_sizes(crypt_stat); + + rc = ecryptfs_read_and_validate_header_region(inode); + ecryptfs_put_lower_file(inode); + if (rc) { + rc = ecryptfs_read_and_validate_xattr_region(dentry, inode); + if (!rc) + crypt_stat->flags |= ECRYPTFS_METADATA_IN_XATTR; + } + + /* Must return 0 to allow non-eCryptfs files to be looked up, too */ + return 0; +} + /** * ecryptfs_lookup_interpose - Dentry interposition for a lookup */ -static int ecryptfs_lookup_interpose(struct dentry *ecryptfs_dentry, +static int ecryptfs_lookup_interpose(struct dentry *dentry, struct dentry *lower_dentry, - struct inode *ecryptfs_dir_inode) + struct inode *dir_inode) { - struct dentry *lower_dir_dentry; + struct inode *inode, *lower_inode = lower_dentry->d_inode; + struct ecryptfs_dentry_info *dentry_info; struct vfsmount *lower_mnt; - struct inode *inode, *lower_inode; - struct ecryptfs_crypt_stat *crypt_stat; - char *page_virt = NULL; - int put_lower = 0, rc = 0; - - lower_dir_dentry = lower_dentry->d_parent; - lower_mnt = mntget(ecryptfs_dentry_to_lower_mnt( - ecryptfs_dentry->d_parent)); - lower_inode = lower_dentry->d_inode; - fsstack_copy_attr_atime(ecryptfs_dir_inode, lower_dir_dentry->d_inode); + int rc = 0; + + lower_mnt = mntget(ecryptfs_dentry_to_lower_mnt(dentry->d_parent)); + fsstack_copy_attr_atime(dir_inode, lower_dentry->d_parent->d_inode); BUG_ON(!lower_dentry->d_count); - ecryptfs_set_dentry_private(ecryptfs_dentry, - kmem_cache_alloc(ecryptfs_dentry_info_cache, - GFP_KERNEL)); - if (!ecryptfs_dentry_to_private(ecryptfs_dentry)) { - rc = -ENOMEM; + + dentry_info = kmem_cache_alloc(ecryptfs_dentry_info_cache, GFP_KERNEL); + ecryptfs_set_dentry_private(dentry, dentry_info); + if (!dentry_info) { printk(KERN_ERR "%s: Out of memory whilst attempting " "to allocate ecryptfs_dentry_info struct\n", __func__); - goto out_put; + dput(lower_dentry); + mntput(lower_mnt); + d_drop(dentry); + return -ENOMEM; } - ecryptfs_set_dentry_lower(ecryptfs_dentry, lower_dentry); - ecryptfs_set_dentry_lower_mnt(ecryptfs_dentry, lower_mnt); + ecryptfs_set_dentry_lower(dentry, lower_dentry); + ecryptfs_set_dentry_lower_mnt(dentry, lower_mnt); + if (!lower_dentry->d_inode) { /* We want to add because we couldn't find in lower */ - d_add(ecryptfs_dentry, NULL); - goto out; + d_add(dentry, NULL); + return 0; } - inode = __ecryptfs_get_inode(lower_inode, ecryptfs_dir_inode->i_sb); + inode = __ecryptfs_get_inode(lower_inode, dir_inode->i_sb); if (IS_ERR(inode)) { - rc = PTR_ERR(inode); - printk(KERN_ERR "%s: Error interposing; rc = [%d]\n", - __func__, rc); - goto out; - } - if (!S_ISREG(inode->i_mode)) { - if (inode->i_state & I_NEW) - unlock_new_inode(inode); - d_add(ecryptfs_dentry, inode); - goto out; - } - /* Released in this function */ - page_virt = kmem_cache_zalloc(ecryptfs_header_cache_2, GFP_USER); - if (!page_virt) { - printk(KERN_ERR "%s: Cannot kmem_cache_zalloc() a page\n", - __func__); - rc = -ENOMEM; - make_bad_inode(inode); - goto out; - } - rc = ecryptfs_get_lower_file(ecryptfs_dentry, inode); - if (rc) { - printk(KERN_ERR "%s: Error attempting to initialize " - "the lower file for the dentry with name " - "[%s]; rc = [%d]\n", __func__, - ecryptfs_dentry->d_name.name, rc); - make_bad_inode(inode); - goto out_free_kmem; + printk(KERN_ERR "%s: Error interposing; rc = [%ld]\n", + __func__, PTR_ERR(inode)); + return PTR_ERR(inode); } - put_lower = 1; - crypt_stat = &ecryptfs_inode_to_private(inode)->crypt_stat; - /* TODO: lock for crypt_stat comparison */ - if (!(crypt_stat->flags & ECRYPTFS_POLICY_APPLIED)) - ecryptfs_set_default_sizes(crypt_stat); - rc = ecryptfs_read_and_validate_header_region(page_virt, inode); - if (rc) { - memset(page_virt, 0, PAGE_CACHE_SIZE); - rc = ecryptfs_read_and_validate_xattr_region(page_virt, - inode); + if (S_ISREG(inode->i_mode)) { + rc = ecryptfs_i_size_read(dentry, inode); if (rc) { - rc = 0; - goto unlock_inode; + make_bad_inode(inode); + return rc; } - crypt_stat->flags |= ECRYPTFS_METADATA_IN_XATTR; } - ecryptfs_i_size_init(page_virt, inode); -unlock_inode: + if (inode->i_state & I_NEW) unlock_new_inode(inode); - d_add(ecryptfs_dentry, inode); -out_free_kmem: - kmem_cache_free(ecryptfs_header_cache_2, page_virt); - goto out; -out_put: - dput(lower_dentry); - mntput(lower_mnt); - d_drop(ecryptfs_dentry); -out: - if (put_lower) - ecryptfs_put_lower_file(inode); + d_add(dentry, inode); + return rc; } -- cgit v1.2.3 From 3063287053bca5207e121c567b95b2b6f0bdc2c8 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Tue, 24 May 2011 05:11:12 -0500 Subject: eCryptfs: Remove ecryptfs_header_cache_2 Now that ecryptfs_lookup_interpose() is no longer using ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to ecryptfs_header_cache. Signed-off-by: Tyler Hicks --- fs/ecryptfs/crypto.c | 7 +++---- fs/ecryptfs/ecryptfs_kernel.h | 3 +-- fs/ecryptfs/main.c | 9 ++------- 3 files changed, 6 insertions(+), 13 deletions(-) diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index 66d8e6748a46..58609bde3b9f 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -1234,8 +1234,7 @@ ecryptfs_write_header_metadata(char *virt, (*written) = 6; } -struct kmem_cache *ecryptfs_header_cache_1; -struct kmem_cache *ecryptfs_header_cache_2; +struct kmem_cache *ecryptfs_header_cache; /** * ecryptfs_write_headers_virt @@ -1601,7 +1600,7 @@ int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry) ecryptfs_copy_mount_wide_flags_to_inode_flags(crypt_stat, mount_crypt_stat); /* Read the first page from the underlying file */ - page_virt = kmem_cache_alloc(ecryptfs_header_cache_1, GFP_USER); + page_virt = kmem_cache_alloc(ecryptfs_header_cache, GFP_USER); if (!page_virt) { rc = -ENOMEM; printk(KERN_ERR "%s: Unable to allocate page_virt\n", @@ -1646,7 +1645,7 @@ int ecryptfs_read_metadata(struct dentry *ecryptfs_dentry) out: if (page_virt) { memset(page_virt, 0, PAGE_CACHE_SIZE); - kmem_cache_free(ecryptfs_header_cache_1, page_virt); + kmem_cache_free(ecryptfs_header_cache, page_virt); } return rc; } diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 8297ddaca7c4..43c7c43b06f5 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -605,8 +605,7 @@ extern struct kmem_cache *ecryptfs_file_info_cache; extern struct kmem_cache *ecryptfs_dentry_info_cache; extern struct kmem_cache *ecryptfs_inode_info_cache; extern struct kmem_cache *ecryptfs_sb_info_cache; -extern struct kmem_cache *ecryptfs_header_cache_1; -extern struct kmem_cache *ecryptfs_header_cache_2; +extern struct kmem_cache *ecryptfs_header_cache; extern struct kmem_cache *ecryptfs_xattr_cache; extern struct kmem_cache *ecryptfs_key_record_cache; extern struct kmem_cache *ecryptfs_key_sig_cache; diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 943a4f55ed6d..9f1bb747d77d 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -635,13 +635,8 @@ static struct ecryptfs_cache_info { .size = sizeof(struct ecryptfs_sb_info), }, { - .cache = &ecryptfs_header_cache_1, - .name = "ecryptfs_headers_1", - .size = PAGE_CACHE_SIZE, - }, - { - .cache = &ecryptfs_header_cache_2, - .name = "ecryptfs_headers_2", + .cache = &ecryptfs_header_cache, + .name = "ecryptfs_headers", .size = PAGE_CACHE_SIZE, }, { -- cgit v1.2.3 From fac04863cef53a69830590b2e1c54345068a9747 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 May 2011 14:06:42 -0700 Subject: arm gpio drivers: make them 'depends on ARM' We had a few drivers move from arch/arm into drivers/gpio, but they don't actually compile without the ARM platform headers etc. As a result they were messing up allyesconfig on x86. Make them depend on ARM. Reported-by: Ingo Molnar Cc: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/gpio/Kconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 592397629ddc..4a7f63143455 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -89,24 +89,28 @@ config GPIO_IT8761E config GPIO_EXYNOS4 bool "Samsung Exynos4 GPIO library support" default y if CPU_EXYNOS4210 + depends on ARM help Say yes here to support Samsung Exynos4 series SoCs GPIO library config GPIO_PLAT_SAMSUNG bool "Samsung SoCs GPIO library support" default y if SAMSUNG_GPIOLIB_4BIT + depends on ARM help Say yes here to support Samsung SoCs GPIO library config GPIO_S5PC100 bool "Samsung S5PC100 GPIO library support" default y if CPU_S5PC100 + depends on ARM help Say yes here to support Samsung S5PC100 SoCs GPIO library config GPIO_S5PV210 bool "Samsung S5PV210/S5PC110 GPIO library support" default y if CPU_S5PV210 + depends on ARM help Say yes here to support Samsung S5PV210/S5PC110 SoCs GPIO library -- cgit v1.2.3 From 55922c9d1b84b89cb946c777fddccb3247e7df2c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 May 2011 17:43:36 -0700 Subject: Linux 3.0-rc1 .. except there are various scripts that really know that there are three numbers, so it calls itself "3.0.0-rc1". Hopefully by the time the final 3.0 is out, we'll have that extra zero all figured out. Signed-off-by: Linus Torvalds --- Makefile | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Makefile b/Makefile index 529d93fa2430..afb8e0d26f2c 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ -VERSION = 2 -PATCHLEVEL = 6 -SUBLEVEL = 39 -EXTRAVERSION = -NAME = Flesh-Eating Bats with Fangs +VERSION = 3 +PATCHLEVEL = 0 +SUBLEVEL = 0 +EXTRAVERSION = -rc1 +NAME = Sneaky Weasel # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- cgit v1.2.3 From 15517f7c213442e4d8a098cf0732b237f764c576 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 30 May 2011 11:14:08 -0600 Subject: lguest: fix timer interrupt setup Without an IRQ chip set, we now get a WARN_ON and no timer interrupt. This prevents booting. Fortunately, the fix is a one-liner: set up the timer IRQ like everything else. Signed-off-by: Rusty Russell Cc: stable@kernel.org # .39.x --- arch/x86/lguest/boot.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index e191c096ab90..db832fd65ecb 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -993,6 +993,7 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc) static void lguest_time_init(void) { /* Set up the timer interrupt (0) to go to our simple timer routine */ + lguest_setup_irq(0); irq_set_handler(0, lguest_time_irq); clocksource_register_hz(&lguest_clock, NSEC_PER_SEC); -- cgit v1.2.3 From bc805a03c26e1e25171bc627c6264553d27f746c Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 30 May 2011 11:14:11 -0600 Subject: lguest: fix up compilation after move ed16648eb5b86917f0b90bdcdbc857202da72f90 "Move kvm, uml, and lguest subdirectories" broke the lguest example launcher. Signed-off-by: Rusty Russell --- Documentation/virtual/lguest/Makefile | 2 +- Documentation/virtual/lguest/lguest.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/virtual/lguest/Makefile b/Documentation/virtual/lguest/Makefile index bebac6b4f332..0ac34206f7a7 100644 --- a/Documentation/virtual/lguest/Makefile +++ b/Documentation/virtual/lguest/Makefile @@ -1,5 +1,5 @@ # This creates the demonstration utility "lguest" which runs a Linux guest. -# Missing headers? Add "-I../../include -I../../arch/x86/include" +# Missing headers? Add "-I../../../include -I../../../arch/x86/include" CFLAGS:=-m32 -Wall -Wmissing-declarations -Wmissing-prototypes -O3 -U_FORTIFY_SOURCE all: lguest diff --git a/Documentation/virtual/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c index d9da7e148538..711ba9e9a007 100644 --- a/Documentation/virtual/lguest/lguest.c +++ b/Documentation/virtual/lguest/lguest.c @@ -49,7 +49,7 @@ #include #include #include -#include "../../include/linux/lguest_launcher.h" +#include "../../../include/linux/lguest_launcher.h" /*L:110 * We can ignore the 42 include files we need for this program, but I do want * to draw attention to the use of kernel-style types. -- cgit v1.2.3 From 990c91f0af46c57f0291060d928c7ab82f9d5667 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 30 May 2011 11:14:12 -0600 Subject: lguest: remove support for VIRTIO_F_NOTIFY_ON_EMPTY. No virtio device does this any more, so no need to clutter lguest with it. Signed-off-by: Rusty Russell --- Documentation/virtual/lguest/lguest.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) diff --git a/Documentation/virtual/lguest/lguest.c b/Documentation/virtual/lguest/lguest.c index 711ba9e9a007..cd9d6af61d07 100644 --- a/Documentation/virtual/lguest/lguest.c +++ b/Documentation/virtual/lguest/lguest.c @@ -135,9 +135,6 @@ struct device { /* Is it operational */ bool running; - /* Does Guest want an intrrupt on empty? */ - bool irq_on_empty; - /* Device-specific data. */ void *priv; }; @@ -637,10 +634,7 @@ static void trigger_irq(struct virtqueue *vq) /* If they don't want an interrupt, don't send one... */ if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) { - /* ... unless they've asked us to force one on empty. */ - if (!vq->dev->irq_on_empty - || lg_last_avail(vq) != vq->vring.avail->idx) - return; + return; } /* Send the Guest an interrupt tell them we used something up. */ @@ -1057,15 +1051,6 @@ static void create_thread(struct virtqueue *vq) close(vq->eventfd); } -static bool accepted_feature(struct device *dev, unsigned int bit) -{ - const u8 *features = get_feature_bits(dev) + dev->feature_len; - - if (dev->feature_len < bit / CHAR_BIT) - return false; - return features[bit / CHAR_BIT] & (1 << (bit % CHAR_BIT)); -} - static void start_device(struct device *dev) { unsigned int i; @@ -1079,8 +1064,6 @@ static void start_device(struct device *dev) verbose(" %02x", get_feature_bits(dev) [dev->feature_len+i]); - dev->irq_on_empty = accepted_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY); - for (vq = dev->vq; vq; vq = vq->next) { if (vq->service) create_thread(vq); @@ -1564,7 +1547,6 @@ static void setup_tun_net(char *arg) /* Set up the tun device. */ configure_device(ipfd, tapif, ip); - add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY); /* Expect Guest to handle everything except UFO */ add_feature(dev, VIRTIO_NET_F_CSUM); add_feature(dev, VIRTIO_NET_F_GUEST_CSUM); -- cgit v1.2.3 From 7a7c924cf03da2a76ea4dc0aac1a788cf95a9c29 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 1 Feb 2011 21:43:48 +0100 Subject: virtio_blk: allow re-reading config space at runtime Wire up the virtio_driver config_changed method to get notified about config changes raised by the host. For now we just re-read the device size to support online resizing of devices, but once we add more attributes that might be changeable they could be added as well. Note that the config_changed method is called from irq context, so we'll have to use the workqueue infrastructure to provide us a proper user context for our changes. Signed-off-by: Christoph Hellwig Signed-off-by: Rusty Russell --- drivers/block/virtio_blk.c | 88 ++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 78 insertions(+), 10 deletions(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 6ecf89cdf006..33a48a80c7e8 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -6,10 +6,12 @@ #include #include #include +#include #define PART_BITS 4 static int major, index; +struct workqueue_struct *virtblk_wq; struct virtio_blk { @@ -26,6 +28,9 @@ struct virtio_blk mempool_t *pool; + /* Process context for config space updates */ + struct work_struct config_work; + /* What host tells us, plus 2 for header & tailer. */ unsigned int sg_elems; @@ -291,6 +296,46 @@ static ssize_t virtblk_serial_show(struct device *dev, } DEVICE_ATTR(serial, S_IRUGO, virtblk_serial_show, NULL); +static void virtblk_config_changed_work(struct work_struct *work) +{ + struct virtio_blk *vblk = + container_of(work, struct virtio_blk, config_work); + struct virtio_device *vdev = vblk->vdev; + struct request_queue *q = vblk->disk->queue; + char cap_str_2[10], cap_str_10[10]; + u64 capacity, size; + + /* Host must always specify the capacity. */ + vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity), + &capacity, sizeof(capacity)); + + /* If capacity is too big, truncate with warning. */ + if ((sector_t)capacity != capacity) { + dev_warn(&vdev->dev, "Capacity %llu too large: truncating\n", + (unsigned long long)capacity); + capacity = (sector_t)-1; + } + + size = capacity * queue_logical_block_size(q); + string_get_size(size, STRING_UNITS_2, cap_str_2, sizeof(cap_str_2)); + string_get_size(size, STRING_UNITS_10, cap_str_10, sizeof(cap_str_10)); + + dev_notice(&vdev->dev, + "new size: %llu %d-byte logical blocks (%s/%s)\n", + (unsigned long long)capacity, + queue_logical_block_size(q), + cap_str_10, cap_str_2); + + set_capacity(vblk->disk, capacity); +} + +static void virtblk_config_changed(struct virtio_device *vdev) +{ + struct virtio_blk *vblk = vdev->priv; + + queue_work(virtblk_wq, &vblk->config_work); +} + static int __devinit virtblk_probe(struct virtio_device *vdev) { struct virtio_blk *vblk; @@ -327,6 +372,7 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) vblk->vdev = vdev; vblk->sg_elems = sg_elems; sg_init_table(vblk->sg, vblk->sg_elems); + INIT_WORK(&vblk->config_work, virtblk_config_changed_work); /* We expect one virtqueue, for output. */ vblk->vq = virtio_find_single_vq(vdev, blk_done, "requests"); @@ -477,6 +523,8 @@ static void __devexit virtblk_remove(struct virtio_device *vdev) { struct virtio_blk *vblk = vdev->priv; + flush_work(&vblk->config_work); + /* Nothing should be pending. */ BUG_ON(!list_empty(&vblk->reqs)); @@ -508,27 +556,47 @@ static unsigned int features[] = { * Use __refdata to avoid this warning. */ static struct virtio_driver __refdata virtio_blk = { - .feature_table = features, - .feature_table_size = ARRAY_SIZE(features), - .driver.name = KBUILD_MODNAME, - .driver.owner = THIS_MODULE, - .id_table = id_table, - .probe = virtblk_probe, - .remove = __devexit_p(virtblk_remove), + .feature_table = features, + .feature_table_size = ARRAY_SIZE(features), + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .id_table = id_table, + .probe = virtblk_probe, + .remove = __devexit_p(virtblk_remove), + .config_changed = virtblk_config_changed, }; static int __init init(void) { + int error; + + virtblk_wq = alloc_workqueue("virtio-blk", 0, 0); + if (!virtblk_wq) + return -ENOMEM; + major = register_blkdev(0, "virtblk"); - if (major < 0) - return major; - return register_virtio_driver(&virtio_blk); + if (major < 0) { + error = major; + goto out_destroy_workqueue; + } + + error = register_virtio_driver(&virtio_blk); + if (error) + goto out_unregister_blkdev; + return 0; + +out_unregister_blkdev: + unregister_blkdev(major, "virtblk"); +out_destroy_workqueue: + destroy_workqueue(virtblk_wq); + return error; } static void __exit fini(void) { unregister_blkdev(major, "virtblk"); unregister_virtio_driver(&virtio_blk); + destroy_workqueue(virtblk_wq); } module_init(init); module_exit(fini); -- cgit v1.2.3 From 6917f83ffe5e6b6414ccc845263b792ed201c0f1 Mon Sep 17 00:00:00 2001 From: Liu Yuan Date: Sun, 24 Apr 2011 02:49:26 +0800 Subject: drivers, block: virtio_blk: Replace cryptic number with the macro It is easier to figure out the context by reading SCSI_SENSE_BUFFERSIZE instead of plain '96'. Signed-off-by: Liu Yuan Signed-off-by: Rusty Russell --- drivers/block/virtio_blk.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 33a48a80c7e8..079c08808d8a 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -7,6 +7,7 @@ #include #include #include +#include #define PART_BITS 4 @@ -146,7 +147,7 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk, num = blk_rq_map_sg(q, vbr->req, vblk->sg + out); if (vbr->req->cmd_type == REQ_TYPE_BLOCK_PC) { - sg_set_buf(&vblk->sg[num + out + in++], vbr->req->sense, 96); + sg_set_buf(&vblk->sg[num + out + in++], vbr->req->sense, SCSI_SENSE_BUFFERSIZE); sg_set_buf(&vblk->sg[num + out + in++], &vbr->in_hdr, sizeof(vbr->in_hdr)); } -- cgit v1.2.3 From 177dbd95637a52b9118aca757d5856ec3995d3e7 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 30 May 2011 11:14:13 -0600 Subject: virtio console: don't manually set or finalize VIRTIO_CONSOLE_F_MULTIPORT. That's already been done by the virtio infrastructure before the probe function is called. Reported-by: alexey.kardashevskiy@au1.ibm.com Acked-by: Amit Shah Tested-by: Amit Shah Signed-off-by: Rusty Russell --- drivers/char/virtio_console.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 838568a7dbf5..fb68b1295373 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1677,17 +1677,12 @@ static int __devinit virtcons_probe(struct virtio_device *vdev) portdev->config.max_nr_ports = 1; if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) { multiport = true; - vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT; - vdev->config->get(vdev, offsetof(struct virtio_console_config, max_nr_ports), &portdev->config.max_nr_ports, sizeof(portdev->config.max_nr_ports)); } - /* Let the Host know we support multiple ports.*/ - vdev->config->finalize_features(vdev); - err = init_vqs(portdev); if (err < 0) { dev_err(&vdev->dev, "Error %d initializing vqs\n", err); -- cgit v1.2.3 From bf50e69f63d21091e525185c3ae761412be0ba72 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 7 Apr 2011 10:43:25 -0700 Subject: virtio balloon: kill tell-host-first logic The virtio balloon driver has a VIRTIO_BALLOON_F_MUST_TELL_HOST feature bit. Whenever the bit is set, the guest kernel must always tell the host before we free pages back to the allocator. Without this feature, we might free a page (and have another user touch it) while the hypervisor is unprepared for it. But, if the bit is _not_ set, we are under no obligation to reverse the order; we're under no obligation to do _anything_. As of now, qemu-kvm defines the bit, but doesn't set it. This patch makes the "tell host first" logic the only case. This should make everybody happy, and reduce the amount of untested or untestable code in the kernel. This _also_ means that we don't have to preserve a pfn list after the pages are freed, which should let us get rid of some temporary storage (vb->pfns) eventually. Signed-off-by: Dave Hansen Signed-off-by: Rusty Russell --- drivers/virtio/virtio_balloon.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 0f1da45ba47d..e058ace2a4ad 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -40,9 +40,6 @@ struct virtio_balloon /* Waiting for host to ack the pages we released. */ struct completion acked; - /* Do we have to tell Host *before* we reuse pages? */ - bool tell_host_first; - /* The pages we've told the Host we're not using. */ unsigned int num_pages; struct list_head pages; @@ -151,13 +148,14 @@ static void leak_balloon(struct virtio_balloon *vb, size_t num) vb->num_pages--; } - if (vb->tell_host_first) { - tell_host(vb, vb->deflate_vq); - release_pages_by_pfn(vb->pfns, vb->num_pfns); - } else { - release_pages_by_pfn(vb->pfns, vb->num_pfns); - tell_host(vb, vb->deflate_vq); - } + + /* + * Note that if + * virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST); + * is true, we *have* to do it in this order + */ + tell_host(vb, vb->deflate_vq); + release_pages_by_pfn(vb->pfns, vb->num_pfns); } static inline void update_stat(struct virtio_balloon *vb, int idx, @@ -325,9 +323,6 @@ static int virtballoon_probe(struct virtio_device *vdev) goto out_del_vqs; } - vb->tell_host_first - = virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST); - return 0; out_del_vqs: -- cgit v1.2.3 From a1b383870a28cfbd1657d4922c0fafc634a62ebd Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 30 May 2011 11:14:13 -0600 Subject: virtio: add full three-clause BSD text to headers. It's unclear to me if it's important, but it's obviously causing my technical colleages some headaches and I'd hate such imprecision to slow virtio adoption. I've emailed this to all non-trivial contributors for approval, too. Signed-off-by: Rusty Russell Acked-by: Grant Likely Acked-by: Ryan Harper Acked-by: Anthony Liguori Acked-by: Eric Van Hensbergen Acked-by: john cooper Acked-by: Aneesh Kumar K.V Acked-by: Christian Borntraeger Acked-by: Fernando Luis Vazquez Cao --- include/linux/virtio_9p.h | 25 ++++++++++++++++++++++++- include/linux/virtio_balloon.h | 25 ++++++++++++++++++++++++- include/linux/virtio_blk.h | 25 ++++++++++++++++++++++++- include/linux/virtio_config.h | 25 ++++++++++++++++++++++++- include/linux/virtio_console.h | 26 +++++++++++++++++++++++++- include/linux/virtio_ids.h | 24 +++++++++++++++++++++++- include/linux/virtio_net.h | 25 ++++++++++++++++++++++++- include/linux/virtio_pci.h | 23 +++++++++++++++++++++++ include/linux/virtio_ring.h | 23 +++++++++++++++++++++++ 9 files changed, 214 insertions(+), 7 deletions(-) diff --git a/include/linux/virtio_9p.h b/include/linux/virtio_9p.h index e68b439b2860..277c4ad44e84 100644 --- a/include/linux/virtio_9p.h +++ b/include/linux/virtio_9p.h @@ -1,7 +1,30 @@ #ifndef _LINUX_VIRTIO_9P_H #define _LINUX_VIRTIO_9P_H /* This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. */ + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ #include #include #include diff --git a/include/linux/virtio_balloon.h b/include/linux/virtio_balloon.h index a50ecd1b81a2..652dc8bea921 100644 --- a/include/linux/virtio_balloon.h +++ b/include/linux/virtio_balloon.h @@ -1,7 +1,30 @@ #ifndef _LINUX_VIRTIO_BALLOON_H #define _LINUX_VIRTIO_BALLOON_H /* This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. */ + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ #include #include diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index 167720d695ed..e0edb40ca7aa 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -1,7 +1,30 @@ #ifndef _LINUX_VIRTIO_BLK_H #define _LINUX_VIRTIO_BLK_H /* This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. */ + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ #include #include #include diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 800617b4ddd5..39c88c5ad19d 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -1,7 +1,30 @@ #ifndef _LINUX_VIRTIO_CONFIG_H #define _LINUX_VIRTIO_CONFIG_H /* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so - * anyone can use the definitions to implement compatible drivers/servers. */ + * anyone can use the definitions to implement compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ /* Virtio devices use a standardized configuration space to define their * features and pass configuration information, but each implementation can diff --git a/include/linux/virtio_console.h b/include/linux/virtio_console.h index e4d333543a33..bdf4b0034739 100644 --- a/include/linux/virtio_console.h +++ b/include/linux/virtio_console.h @@ -5,7 +5,31 @@ #include /* * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so - * anyone can use the definitions to implement compatible drivers/servers. + * anyone can use the definitions to implement compatible drivers/servers: + * + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. * * Copyright (C) Red Hat, Inc., 2009, 2010, 2011 * Copyright (C) Amit Shah , 2009, 2010, 2011 diff --git a/include/linux/virtio_ids.h b/include/linux/virtio_ids.h index 06660c0a78d7..85bb0bb66ffc 100644 --- a/include/linux/virtio_ids.h +++ b/include/linux/virtio_ids.h @@ -5,7 +5,29 @@ * * This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. - */ + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ #define VIRTIO_ID_NET 1 /* virtio net */ #define VIRTIO_ID_BLOCK 2 /* virtio block */ diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 085e42298ce5..136040bba3e3 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -1,7 +1,30 @@ #ifndef _LINUX_VIRTIO_NET_H #define _LINUX_VIRTIO_NET_H /* This header is BSD licensed so anyone can use the definitions to implement - * compatible drivers/servers. */ + * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ #include #include #include diff --git a/include/linux/virtio_pci.h b/include/linux/virtio_pci.h index 9a3d7c48c622..ea66f3f60d63 100644 --- a/include/linux/virtio_pci.h +++ b/include/linux/virtio_pci.h @@ -11,6 +11,29 @@ * * This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. */ #ifndef _LINUX_VIRTIO_PCI_H diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index e4d144b132b5..a813e5d460eb 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -7,6 +7,29 @@ * This header is BSD licensed so anyone can use the definitions to implement * compatible drivers/servers. * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of IBM nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * * Copyright Rusty Russell IBM Corporation 2007. */ #include -- cgit v1.2.3 From 770b31a85e000b0194974922f238a30ade4246b6 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 20 May 2011 02:10:17 +0300 Subject: virtio: event index interface Define a new feature bit for the guest and host to utilize an event index (like Xen) instead if a flag bit to enable/disable interrupts and kicks. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- include/linux/virtio_ring.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index a813e5d460eb..c4eef73deb3f 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -52,6 +52,12 @@ /* We support indirect buffer descriptors */ #define VIRTIO_RING_F_INDIRECT_DESC 28 +/* The Guest publishes the used index for which it expects an interrupt + * at the end of the avail ring. Host should ignore the avail->flags field. */ +/* The Host publishes the avail index for which it expects a kick + * at the end of the used ring. Guest should ignore the used->flags field. */ +#define VIRTIO_RING_F_EVENT_IDX 29 + /* Virtio ring descriptors: 16 bytes. These can chain together via "next". */ struct vring_desc { /* Address (guest-physical). */ @@ -106,6 +112,7 @@ struct vring { * __u16 avail_flags; * __u16 avail_idx; * __u16 available[num]; + * __u16 used_event_idx; * * // Padding to the next align boundary. * char pad[]; @@ -114,8 +121,14 @@ struct vring { * __u16 used_flags; * __u16 used_idx; * struct vring_used_elem used[num]; + * __u16 avail_event_idx; * }; */ +/* We publish the used event index at the end of the available ring, and vice + * versa. They are at the end for backwards compatibility. */ +#define vring_used_event(vr) ((vr)->avail->ring[(vr)->num]) +#define vring_avail_event(vr) (*(__u16 *)&(vr)->used->ring[(vr)->num]) + static inline void vring_init(struct vring *vr, unsigned int num, void *p, unsigned long align) { @@ -130,7 +143,7 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) { return ((sizeof(struct vring_desc) * num + sizeof(__u16) * (2 + num) + align - 1) & ~(align - 1)) - + sizeof(__u16) * 2 + sizeof(struct vring_used_elem) * num; + + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num; } #ifdef __KERNEL__ -- cgit v1.2.3 From bf7035bf20563a6cadcb9e870406e7b21daf5e30 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 20 May 2011 02:10:27 +0300 Subject: virtio ring: inline function to check for events With the new used_event and avail_event and features, both host and guest need similar logic to check whether events are enabled, so it helps to put the common code in the header. Note that Xen has similar logic for notification hold-off in include/xen/interface/io/ring.h with req_event and req_prod corresponding to event_idx + 1 and new_idx respectively. +1 comes from the fact that req_event and req_prod in Xen start at 1, while event index in virtio starts at 0. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- include/linux/virtio_ring.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index c4eef73deb3f..4a32cb6da425 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -146,6 +146,20 @@ static inline unsigned vring_size(unsigned int num, unsigned long align) + sizeof(__u16) * 3 + sizeof(struct vring_used_elem) * num; } +/* The following is used with USED_EVENT_IDX and AVAIL_EVENT_IDX */ +/* Assuming a given event_idx value from the other size, if + * we have just incremented index from old to new_idx, + * should we trigger an event? */ +static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old) +{ + /* Note: Xen has similar logic for notification hold-off + * in include/xen/interface/io/ring.h with req_event and req_prod + * corresponding to event_idx + 1 and new_idx respectively. + * Note also that req_event and req_prod in Xen start at 1, + * event indexes in virtio start at 0. */ + return (__u16)(new_idx - event_idx - 1) < (__u16)(new_idx - old); +} + #ifdef __KERNEL__ #include struct virtio_device; -- cgit v1.2.3 From a5c262c5fd83ece01bd649fb08416c501d4c59d7 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 20 May 2011 02:10:44 +0300 Subject: virtio_ring: support event idx feature Support for the new event idx feature: 1. When enabling interrupts, publish the current avail index value to the host to get interrupts on the next update. 2. Use the new avail_event feature to reduce the number of exits from the guest. Simple test with the simulator: [virtio]# time ./virtio_test spurious wakeus: 0x7 real 0m0.169s user 0m0.140s sys 0m0.019s [virtio]# time ./virtio_test --no-event-idx spurious wakeus: 0x11 real 0m0.649s user 0m0.295s sys 0m0.335s Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- drivers/virtio/virtio_ring.c | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-) diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index b0043fb26a4d..a5fadc40c448 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -82,6 +82,9 @@ struct vring_virtqueue /* Host supports indirect buffers */ bool indirect; + /* Host publishes avail event idx */ + bool event; + /* Number of free buffers */ unsigned int num_free; /* Head of free buffer list. */ @@ -237,18 +240,22 @@ EXPORT_SYMBOL_GPL(virtqueue_add_buf_gfp); void virtqueue_kick(struct virtqueue *_vq) { struct vring_virtqueue *vq = to_vvq(_vq); + u16 new, old; START_USE(vq); /* Descriptors and available array need to be set before we expose the * new available array entries. */ virtio_wmb(); - vq->vring.avail->idx += vq->num_added; + old = vq->vring.avail->idx; + new = vq->vring.avail->idx = old + vq->num_added; vq->num_added = 0; /* Need to update avail index before checking if we should notify */ virtio_mb(); - if (!(vq->vring.used->flags & VRING_USED_F_NO_NOTIFY)) + if (vq->event ? + vring_need_event(vring_avail_event(&vq->vring), new, old) : + !(vq->vring.used->flags & VRING_USED_F_NO_NOTIFY)) /* Prod other side to tell it about changes. */ vq->notify(&vq->vq); @@ -324,6 +331,14 @@ void *virtqueue_get_buf(struct virtqueue *_vq, unsigned int *len) ret = vq->data[i]; detach_buf(vq, i); vq->last_used_idx++; + /* If we expect an interrupt for the next entry, tell host + * by writing event index and flush out the write before + * the read in the next get_buf call. */ + if (!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) { + vring_used_event(&vq->vring) = vq->last_used_idx; + virtio_mb(); + } + END_USE(vq); return ret; } @@ -345,7 +360,11 @@ bool virtqueue_enable_cb(struct virtqueue *_vq) /* We optimistically turn back on interrupts, then check if there was * more to do. */ + /* Depending on the VIRTIO_RING_F_EVENT_IDX feature, we need to + * either clear the flags bit or point the event index at the next + * entry. Always do both to keep code simple. */ vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT; + vring_used_event(&vq->vring) = vq->last_used_idx; virtio_mb(); if (unlikely(more_used(vq))) { END_USE(vq); @@ -438,6 +457,7 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, #endif vq->indirect = virtio_has_feature(vdev, VIRTIO_RING_F_INDIRECT_DESC); + vq->event = virtio_has_feature(vdev, VIRTIO_RING_F_EVENT_IDX); /* No callback? Tell other side not to bother us. */ if (!callback) @@ -472,6 +492,8 @@ void vring_transport_features(struct virtio_device *vdev) switch (i) { case VIRTIO_RING_F_INDIRECT_DESC: break; + case VIRTIO_RING_F_EVENT_IDX: + break; default: /* We don't understand this bit. */ clear_bit(i, vdev->features); -- cgit v1.2.3 From 8ea8cf89e19aeb596b818ee5f2bec8a8b0586b60 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 20 May 2011 02:10:54 +0300 Subject: vhost: support event index Support the new event index feature. When acked, utilize it to reduce the # of interrupts sent to the guest. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- drivers/vhost/net.c | 12 ++--- drivers/vhost/test.c | 6 +-- drivers/vhost/vhost.c | 138 +++++++++++++++++++++++++++++++++++++------------- drivers/vhost/vhost.h | 21 +++++--- 4 files changed, 127 insertions(+), 50 deletions(-) diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 2f7c76a85e53..e224a92baa16 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -144,7 +144,7 @@ static void handle_tx(struct vhost_net *net) } mutex_lock(&vq->mutex); - vhost_disable_notify(vq); + vhost_disable_notify(&net->dev, vq); if (wmem < sock->sk->sk_sndbuf / 2) tx_poll_stop(net); @@ -166,8 +166,8 @@ static void handle_tx(struct vhost_net *net) set_bit(SOCK_ASYNC_NOSPACE, &sock->flags); break; } - if (unlikely(vhost_enable_notify(vq))) { - vhost_disable_notify(vq); + if (unlikely(vhost_enable_notify(&net->dev, vq))) { + vhost_disable_notify(&net->dev, vq); continue; } break; @@ -315,7 +315,7 @@ static void handle_rx(struct vhost_net *net) return; mutex_lock(&vq->mutex); - vhost_disable_notify(vq); + vhost_disable_notify(&net->dev, vq); vhost_hlen = vq->vhost_hlen; sock_hlen = vq->sock_hlen; @@ -334,10 +334,10 @@ static void handle_rx(struct vhost_net *net) break; /* OK, now we need to know about added descriptors. */ if (!headcount) { - if (unlikely(vhost_enable_notify(vq))) { + if (unlikely(vhost_enable_notify(&net->dev, vq))) { /* They have slipped one in as we were * doing that: check again. */ - vhost_disable_notify(vq); + vhost_disable_notify(&net->dev, vq); continue; } /* Nothing new? Wait for eventfd to tell us diff --git a/drivers/vhost/test.c b/drivers/vhost/test.c index 099f30230d06..734e1d74ad80 100644 --- a/drivers/vhost/test.c +++ b/drivers/vhost/test.c @@ -49,7 +49,7 @@ static void handle_vq(struct vhost_test *n) return; mutex_lock(&vq->mutex); - vhost_disable_notify(vq); + vhost_disable_notify(&n->dev, vq); for (;;) { head = vhost_get_vq_desc(&n->dev, vq, vq->iov, @@ -61,8 +61,8 @@ static void handle_vq(struct vhost_test *n) break; /* Nothing new? Wait for eventfd to tell us they refilled. */ if (head == vq->num) { - if (unlikely(vhost_enable_notify(vq))) { - vhost_disable_notify(vq); + if (unlikely(vhost_enable_notify(&n->dev, vq))) { + vhost_disable_notify(&n->dev, vq); continue; } break; diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 7aa4eea930f1..ea966b356352 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -37,6 +37,9 @@ enum { VHOST_MEMORY_F_LOG = 0x1, }; +#define vhost_used_event(vq) ((u16 __user *)&vq->avail->ring[vq->num]) +#define vhost_avail_event(vq) ((u16 __user *)&vq->used->ring[vq->num]) + static void vhost_poll_func(struct file *file, wait_queue_head_t *wqh, poll_table *pt) { @@ -161,6 +164,8 @@ static void vhost_vq_reset(struct vhost_dev *dev, vq->last_avail_idx = 0; vq->avail_idx = 0; vq->last_used_idx = 0; + vq->signalled_used = 0; + vq->signalled_used_valid = false; vq->used_flags = 0; vq->log_used = false; vq->log_addr = -1ull; @@ -489,16 +494,17 @@ static int memory_access_ok(struct vhost_dev *d, struct vhost_memory *mem, return 1; } -static int vq_access_ok(unsigned int num, +static int vq_access_ok(struct vhost_dev *d, unsigned int num, struct vring_desc __user *desc, struct vring_avail __user *avail, struct vring_used __user *used) { + size_t s = vhost_has_feature(d, VIRTIO_RING_F_EVENT_IDX) ? 2 : 0; return access_ok(VERIFY_READ, desc, num * sizeof *desc) && access_ok(VERIFY_READ, avail, - sizeof *avail + num * sizeof *avail->ring) && + sizeof *avail + num * sizeof *avail->ring + s) && access_ok(VERIFY_WRITE, used, - sizeof *used + num * sizeof *used->ring); + sizeof *used + num * sizeof *used->ring + s); } /* Can we log writes? */ @@ -514,9 +520,11 @@ int vhost_log_access_ok(struct vhost_dev *dev) /* Verify access for write logging. */ /* Caller should have vq mutex and device mutex */ -static int vq_log_access_ok(struct vhost_virtqueue *vq, void __user *log_base) +static int vq_log_access_ok(struct vhost_dev *d, struct vhost_virtqueue *vq, + void __user *log_base) { struct vhost_memory *mp; + size_t s = vhost_has_feature(d, VIRTIO_RING_F_EVENT_IDX) ? 2 : 0; mp = rcu_dereference_protected(vq->dev->memory, lockdep_is_held(&vq->mutex)); @@ -524,15 +532,15 @@ static int vq_log_access_ok(struct vhost_virtqueue *vq, void __user *log_base) vhost_has_feature(vq->dev, VHOST_F_LOG_ALL)) && (!vq->log_used || log_access_ok(log_base, vq->log_addr, sizeof *vq->used + - vq->num * sizeof *vq->used->ring)); + vq->num * sizeof *vq->used->ring + s)); } /* Can we start vq? */ /* Caller should have vq mutex and device mutex */ int vhost_vq_access_ok(struct vhost_virtqueue *vq) { - return vq_access_ok(vq->num, vq->desc, vq->avail, vq->used) && - vq_log_access_ok(vq, vq->log_base); + return vq_access_ok(vq->dev, vq->num, vq->desc, vq->avail, vq->used) && + vq_log_access_ok(vq->dev, vq, vq->log_base); } static long vhost_set_memory(struct vhost_dev *d, struct vhost_memory __user *m) @@ -577,6 +585,7 @@ static int init_used(struct vhost_virtqueue *vq, if (r) return r; + vq->signalled_used_valid = false; return get_user(vq->last_used_idx, &used->idx); } @@ -674,7 +683,7 @@ static long vhost_set_vring(struct vhost_dev *d, int ioctl, void __user *argp) * If it is not, we don't as size might not have been setup. * We will verify when backend is configured. */ if (vq->private_data) { - if (!vq_access_ok(vq->num, + if (!vq_access_ok(d, vq->num, (void __user *)(unsigned long)a.desc_user_addr, (void __user *)(unsigned long)a.avail_user_addr, (void __user *)(unsigned long)a.used_user_addr)) { @@ -818,7 +827,7 @@ long vhost_dev_ioctl(struct vhost_dev *d, unsigned int ioctl, unsigned long arg) vq = d->vqs + i; mutex_lock(&vq->mutex); /* If ring is inactive, will check when it's enabled. */ - if (vq->private_data && !vq_log_access_ok(vq, base)) + if (vq->private_data && !vq_log_access_ok(d, vq, base)) r = -EFAULT; else vq->log_base = base; @@ -1219,6 +1228,10 @@ int vhost_get_vq_desc(struct vhost_dev *dev, struct vhost_virtqueue *vq, /* On success, increment avail index. */ vq->last_avail_idx++; + + /* Assume notifications from guest are disabled at this point, + * if they aren't we would need to update avail_event index. */ + BUG_ON(!(vq->used_flags & VRING_USED_F_NO_NOTIFY)); return head; } @@ -1267,6 +1280,12 @@ int vhost_add_used(struct vhost_virtqueue *vq, unsigned int head, int len) eventfd_signal(vq->log_ctx, 1); } vq->last_used_idx++; + /* If the driver never bothers to signal in a very long while, + * used index might wrap around. If that happens, invalidate + * signalled_used index we stored. TODO: make sure driver + * signals at least once in 2^16 and remove this. */ + if (unlikely(vq->last_used_idx == vq->signalled_used)) + vq->signalled_used_valid = false; return 0; } @@ -1275,6 +1294,7 @@ static int __vhost_add_used_n(struct vhost_virtqueue *vq, unsigned count) { struct vring_used_elem __user *used; + u16 old, new; int start; start = vq->last_used_idx % vq->num; @@ -1292,7 +1312,14 @@ static int __vhost_add_used_n(struct vhost_virtqueue *vq, ((void __user *)used - (void __user *)vq->used), count * sizeof *used); } - vq->last_used_idx += count; + old = vq->last_used_idx; + new = (vq->last_used_idx += count); + /* If the driver never bothers to signal in a very long while, + * used index might wrap around. If that happens, invalidate + * signalled_used index we stored. TODO: make sure driver + * signals at least once in 2^16 and remove this. */ + if (unlikely((u16)(new - vq->signalled_used) < (u16)(new - old))) + vq->signalled_used_valid = false; return 0; } @@ -1331,29 +1358,47 @@ int vhost_add_used_n(struct vhost_virtqueue *vq, struct vring_used_elem *heads, return r; } -/* This actually signals the guest, using eventfd. */ -void vhost_signal(struct vhost_dev *dev, struct vhost_virtqueue *vq) +static bool vhost_notify(struct vhost_dev *dev, struct vhost_virtqueue *vq) { - __u16 flags; - + __u16 old, new, event; + bool v; /* Flush out used index updates. This is paired * with the barrier that the Guest executes when enabling * interrupts. */ smp_mb(); - if (__get_user(flags, &vq->avail->flags)) { - vq_err(vq, "Failed to get flags"); - return; + if (vhost_has_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY) && + unlikely(vq->avail_idx == vq->last_avail_idx)) + return true; + + if (!vhost_has_feature(dev, VIRTIO_RING_F_EVENT_IDX)) { + __u16 flags; + if (__get_user(flags, &vq->avail->flags)) { + vq_err(vq, "Failed to get flags"); + return true; + } + return !(flags & VRING_AVAIL_F_NO_INTERRUPT); } + old = vq->signalled_used; + v = vq->signalled_used_valid; + new = vq->signalled_used = vq->last_used_idx; + vq->signalled_used_valid = true; - /* If they don't want an interrupt, don't signal, unless empty. */ - if ((flags & VRING_AVAIL_F_NO_INTERRUPT) && - (vq->avail_idx != vq->last_avail_idx || - !vhost_has_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY))) - return; + if (unlikely(!v)) + return true; + if (get_user(event, vhost_used_event(vq))) { + vq_err(vq, "Failed to get used event idx"); + return true; + } + return vring_need_event(event, new, old); +} + +/* This actually signals the guest, using eventfd. */ +void vhost_signal(struct vhost_dev *dev, struct vhost_virtqueue *vq) +{ /* Signal the Guest tell them we used something up. */ - if (vq->call_ctx) + if (vq->call_ctx && vhost_notify(dev, vq)) eventfd_signal(vq->call_ctx, 1); } @@ -1376,7 +1421,7 @@ void vhost_add_used_and_signal_n(struct vhost_dev *dev, } /* OK, now we need to know about added descriptors. */ -bool vhost_enable_notify(struct vhost_virtqueue *vq) +bool vhost_enable_notify(struct vhost_dev *dev, struct vhost_virtqueue *vq) { u16 avail_idx; int r; @@ -1384,11 +1429,34 @@ bool vhost_enable_notify(struct vhost_virtqueue *vq) if (!(vq->used_flags & VRING_USED_F_NO_NOTIFY)) return false; vq->used_flags &= ~VRING_USED_F_NO_NOTIFY; - r = put_user(vq->used_flags, &vq->used->flags); - if (r) { - vq_err(vq, "Failed to enable notification at %p: %d\n", - &vq->used->flags, r); - return false; + if (!vhost_has_feature(dev, VIRTIO_RING_F_EVENT_IDX)) { + r = put_user(vq->used_flags, &vq->used->flags); + if (r) { + vq_err(vq, "Failed to enable notification at %p: %d\n", + &vq->used->flags, r); + return false; + } + } else { + r = put_user(vq->avail_idx, vhost_avail_event(vq)); + if (r) { + vq_err(vq, "Failed to update avail event index at %p: %d\n", + vhost_avail_event(vq), r); + return false; + } + } + if (unlikely(vq->log_used)) { + void __user *used; + /* Make sure data is seen before log. */ + smp_wmb(); + used = vhost_has_feature(dev, VIRTIO_RING_F_EVENT_IDX) ? + &vq->used->flags : vhost_avail_event(vq); + /* Log used flags or event index entry write. Both are 16 bit + * fields. */ + log_write(vq->log_base, vq->log_addr + + (used - (void __user *)vq->used), + sizeof(u16)); + if (vq->log_ctx) + eventfd_signal(vq->log_ctx, 1); } /* They could have slipped one in as we were doing that: make * sure it's written, then check again. */ @@ -1404,15 +1472,17 @@ bool vhost_enable_notify(struct vhost_virtqueue *vq) } /* We don't need to be notified again. */ -void vhost_disable_notify(struct vhost_virtqueue *vq) +void vhost_disable_notify(struct vhost_dev *dev, struct vhost_virtqueue *vq) { int r; if (vq->used_flags & VRING_USED_F_NO_NOTIFY) return; vq->used_flags |= VRING_USED_F_NO_NOTIFY; - r = put_user(vq->used_flags, &vq->used->flags); - if (r) - vq_err(vq, "Failed to enable notification at %p: %d\n", - &vq->used->flags, r); + if (!vhost_has_feature(dev, VIRTIO_RING_F_EVENT_IDX)) { + r = put_user(vq->used_flags, &vq->used->flags); + if (r) + vq_err(vq, "Failed to enable notification at %p: %d\n", + &vq->used->flags, r); + } } diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h index b3363ae38518..8e03379dd30f 100644 --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -84,6 +84,12 @@ struct vhost_virtqueue { /* Used flags */ u16 used_flags; + /* Last used index value we have signalled on */ + u16 signalled_used; + + /* Last used index value we have signalled on */ + bool signalled_used_valid; + /* Log writes to used structure. */ bool log_used; u64 log_addr; @@ -149,8 +155,8 @@ void vhost_add_used_and_signal(struct vhost_dev *, struct vhost_virtqueue *, void vhost_add_used_and_signal_n(struct vhost_dev *, struct vhost_virtqueue *, struct vring_used_elem *heads, unsigned count); void vhost_signal(struct vhost_dev *, struct vhost_virtqueue *); -void vhost_disable_notify(struct vhost_virtqueue *); -bool vhost_enable_notify(struct vhost_virtqueue *); +void vhost_disable_notify(struct vhost_dev *, struct vhost_virtqueue *); +bool vhost_enable_notify(struct vhost_dev *, struct vhost_virtqueue *); int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log, unsigned int log_num, u64 len); @@ -162,11 +168,12 @@ int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log, } while (0) enum { - VHOST_FEATURES = (1 << VIRTIO_F_NOTIFY_ON_EMPTY) | - (1 << VIRTIO_RING_F_INDIRECT_DESC) | - (1 << VHOST_F_LOG_ALL) | - (1 << VHOST_NET_F_VIRTIO_NET_HDR) | - (1 << VIRTIO_NET_F_MRG_RXBUF), + VHOST_FEATURES = (1ULL << VIRTIO_F_NOTIFY_ON_EMPTY) | + (1ULL << VIRTIO_RING_F_INDIRECT_DESC) | + (1ULL << VIRTIO_RING_F_EVENT_IDX) | + (1ULL << VHOST_F_LOG_ALL) | + (1ULL << VHOST_NET_F_VIRTIO_NET_HDR) | + (1ULL << VIRTIO_NET_F_MRG_RXBUF), }; static inline int vhost_has_feature(struct vhost_dev *dev, int bit) -- cgit v1.2.3 From 4423fe40b03f32b11e72ecfa03077e702e55d5a9 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 20 May 2011 02:11:05 +0300 Subject: virtio_test: support event index Add ability to test the new event idx feature, enable by default. Signed-off-by: Rusty Russell --- tools/virtio/virtio_test.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/tools/virtio/virtio_test.c b/tools/virtio/virtio_test.c index df0c6d2c3860..74d3331bdaf9 100644 --- a/tools/virtio/virtio_test.c +++ b/tools/virtio/virtio_test.c @@ -197,6 +197,14 @@ const struct option longopts[] = { .name = "help", .val = 'h', }, + { + .name = "event-idx", + .val = 'E', + }, + { + .name = "no-event-idx", + .val = 'e', + }, { .name = "indirect", .val = 'I', @@ -211,13 +219,17 @@ const struct option longopts[] = { static void help() { - fprintf(stderr, "Usage: virtio_test [--help] [--no-indirect]\n"); + fprintf(stderr, "Usage: virtio_test [--help]" + " [--no-indirect]" + " [--no-event-idx]" + "\n"); } int main(int argc, char **argv) { struct vdev_info dev; - unsigned long long features = 1ULL << VIRTIO_RING_F_INDIRECT_DESC; + unsigned long long features = (1ULL << VIRTIO_RING_F_INDIRECT_DESC) | + (1ULL << VIRTIO_RING_F_EVENT_IDX); int o; for (;;) { @@ -228,6 +240,9 @@ int main(int argc, char **argv) case '?': help(); exit(2); + case 'e': + features &= ~(1ULL << VIRTIO_RING_F_EVENT_IDX); + break; case 'h': help(); goto done; -- cgit v1.2.3 From 7ab358c23cbf15cea08129cd722d1ce77433a94d Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 20 May 2011 02:11:14 +0300 Subject: virtio: add api for delayed callbacks Add an API that tells the other side that callbacks should be delayed until a lot of work has been done. Implement using the new event_idx feature. Note: it might seem advantageous to let the drivers ask for a callback after a specific capacity has been reached. However, as a single head can free many entries in the descriptor table, we don't really have a clue about capacity until get_buf is called. The API is the simplest to implement at the moment, we'll see what kind of hints drivers can pass when there's more than one user of the feature. Signed-off-by: Michael S. Tsirkin Signed-off-by: Rusty Russell --- drivers/virtio/virtio_ring.c | 27 +++++++++++++++++++++++++++ include/linux/virtio.h | 9 +++++++++ 2 files changed, 36 insertions(+) diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index a5fadc40c448..68b9136847af 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -376,6 +376,33 @@ bool virtqueue_enable_cb(struct virtqueue *_vq) } EXPORT_SYMBOL_GPL(virtqueue_enable_cb); +bool virtqueue_enable_cb_delayed(struct virtqueue *_vq) +{ + struct vring_virtqueue *vq = to_vvq(_vq); + u16 bufs; + + START_USE(vq); + + /* We optimistically turn back on interrupts, then check if there was + * more to do. */ + /* Depending on the VIRTIO_RING_F_USED_EVENT_IDX feature, we need to + * either clear the flags bit or point the event index at the next + * entry. Always do both to keep code simple. */ + vq->vring.avail->flags &= ~VRING_AVAIL_F_NO_INTERRUPT; + /* TODO: tune this threshold */ + bufs = (u16)(vq->vring.avail->idx - vq->last_used_idx) * 3 / 4; + vring_used_event(&vq->vring) = vq->last_used_idx + bufs; + virtio_mb(); + if (unlikely((u16)(vq->vring.used->idx - vq->last_used_idx) > bufs)) { + END_USE(vq); + return false; + } + + END_USE(vq); + return true; +} +EXPORT_SYMBOL_GPL(virtqueue_enable_cb_delayed); + void *virtqueue_detach_unused_buf(struct virtqueue *_vq) { struct vring_virtqueue *vq = to_vvq(_vq); diff --git a/include/linux/virtio.h b/include/linux/virtio.h index aff5b4f74041..710885749605 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -51,6 +51,13 @@ struct virtqueue { * This re-enables callbacks; it returns "false" if there are pending * buffers in the queue, to detect a possible race between the driver * checking for more work, and enabling callbacks. + * virtqueue_enable_cb_delayed: restart callbacks after disable_cb. + * vq: the struct virtqueue we're talking about. + * This re-enables callbacks but hints to the other side to delay + * interrupts until most of the available buffers have been processed; + * it returns "false" if there are many pending buffers in the queue, + * to detect a possible race between the driver checking for more work, + * and enabling callbacks. * virtqueue_detach_unused_buf: detach first unused buffer * vq: the struct virtqueue we're talking about. * Returns NULL or the "data" token handed to add_buf @@ -86,6 +93,8 @@ void virtqueue_disable_cb(struct virtqueue *vq); bool virtqueue_enable_cb(struct virtqueue *vq); +bool virtqueue_enable_cb_delayed(struct virtqueue *vq); + void *virtqueue_detach_unused_buf(struct virtqueue *vq); /** -- cgit v1.2.3 From 7a66f784375c5922315bbe879b789ee50b924d26 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 20 May 2011 02:11:23 +0300 Subject: virtio_net: delay TX callbacks Ask for delayed callbacks on TX ring full, to give the other side more of a chance to make progress. Signed-off-by: Michael S. Tsirkin Acked-by: David S. Miller Signed-off-by: Rusty Russell --- drivers/net/virtio_net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 0cb0b0632672..f6853247a620 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -609,7 +609,7 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev) * before it gets out of hand. Naturally, this wastes entries. */ if (capacity < 2+MAX_SKB_FRAGS) { netif_stop_queue(dev); - if (unlikely(!virtqueue_enable_cb(vi->svq))) { + if (unlikely(!virtqueue_enable_cb_delayed(vi->svq))) { /* More just got used, free them then recheck. */ capacity += free_old_xmit_skbs(vi); if (capacity >= 2+MAX_SKB_FRAGS) { -- cgit v1.2.3 From a1706ac4c0201ea0143dc0db0659001b26ceeabb Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 30 May 2011 07:42:51 +0200 Subject: Revert "block: Remove extra discard_alignment from hd_struct." It was not a good idea to start dereferencing disk->queue from the fs sysfs strategy for displaying discard alignment. We ran into first a NULL pointer deref, and after fixing that we sometimes see unvalid disk->queue pointer values. Since discard is the only one of the bunch actually looking into the queue, just revert the change. This reverts commit 23ceb5b7719e9276d4fa72a3ecf94dd396755276. Conflicts: fs/partitions/check.c --- fs/partitions/check.c | 10 +++------- include/linux/genhd.h | 1 + 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/fs/partitions/check.c b/fs/partitions/check.c index f82e762eeca2..d545e97d99c3 100644 --- a/fs/partitions/check.c +++ b/fs/partitions/check.c @@ -255,13 +255,7 @@ ssize_t part_discard_alignment_show(struct device *dev, struct device_attribute *attr, char *buf) { struct hd_struct *p = dev_to_part(dev); - struct gendisk *disk = dev_to_disk(dev); - unsigned int alignment = 0; - - if (disk->queue) - alignment = queue_limit_discard_alignment(&disk->queue->limits, - p->start_sect); - return sprintf(buf, "%u\n", alignment); + return sprintf(buf, "%u\n", p->discard_alignment); } ssize_t part_stat_show(struct device *dev, @@ -455,6 +449,8 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno, p->start_sect = start; p->alignment_offset = queue_limit_alignment_offset(&disk->queue->limits, start); + p->discard_alignment = + queue_limit_discard_alignment(&disk->queue->limits, start); p->nr_sects = len; p->partno = partno; p->policy = get_disk_ro(disk); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index b78956b3c2e7..300d7582006e 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -100,6 +100,7 @@ struct hd_struct { sector_t start_sect; sector_t nr_sects; sector_t alignment_offset; + unsigned int discard_alignment; struct device __dev; struct kobject *holder_dir; int policy, partno; -- cgit v1.2.3 From 3cebde2413ba42504cf2c10ec1d47582912435cd Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Sun, 29 May 2011 21:20:59 -0700 Subject: vfs: shrink_dcache_parent before rmdir, dir rename The dentry_unhash push-down series missed that shink_dcache_parent needs to be called prior to rmdir or dir rename to clear DCACHE_REFERENCED and allow efficient dentry reclaim. Reported-by: Dave Chinner Signed-off-by: Sage Weil Signed-off-by: Al Viro --- fs/namei.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/namei.c b/fs/namei.c index 1ab641f2e78e..e2e4e8d032ee 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2579,6 +2579,7 @@ int vfs_rmdir(struct inode *dir, struct dentry *dentry) if (error) goto out; + shrink_dcache_parent(dentry); error = dir->i_op->rmdir(dir, dentry); if (error) goto out; @@ -2993,6 +2994,8 @@ static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry, if (d_mountpoint(old_dentry) || d_mountpoint(new_dentry)) goto out; + if (target) + shrink_dcache_parent(new_dentry); error = old_dir->i_op->rename(old_dir, old_dentry, new_dir, new_dentry); if (error) goto out; -- cgit v1.2.3 From c7427d23f7ed695ac226dbe3a84d7f19091d34ce Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 30 May 2011 01:50:53 -0400 Subject: autofs4: bogus dentry_unhash() added in ->unlink() Signed-off-by: Al Viro --- fs/autofs4/root.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/autofs4/root.c b/fs/autofs4/root.c index 87d95a8cddbc..f55ae23b137e 100644 --- a/fs/autofs4/root.c +++ b/fs/autofs4/root.c @@ -583,8 +583,6 @@ static int autofs4_dir_unlink(struct inode *dir, struct dentry *dentry) if (!autofs4_oz_mode(sbi) && !capable(CAP_SYS_ADMIN)) return -EACCES; - dentry_unhash(dentry); - if (atomic_dec_and_test(&ino->count)) { p_ino = autofs4_dentry_ino(dentry->d_parent); if (p_ino && dentry->d_parent != dentry) -- cgit v1.2.3 From 27721a52d6c8e33327ec3cae9f730204be99d251 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Mon, 30 May 2011 10:24:47 +0900 Subject: gpio: Fix gpio-exynos4 build fails in mainline After the GPIO driver move, some symbols became selectable when they shouldn't be. Tighten the dependencies. Reported-by: Randy Dunlap Signed-off-by: Grant Likely --- drivers/gpio/Kconfig | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 4a7f63143455..317199796c5f 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -88,29 +88,29 @@ config GPIO_IT8761E config GPIO_EXYNOS4 bool "Samsung Exynos4 GPIO library support" - default y if CPU_EXYNOS4210 - depends on ARM + default y + depends on ARM && CPU_EXYNOS4210 help Say yes here to support Samsung Exynos4 series SoCs GPIO library config GPIO_PLAT_SAMSUNG bool "Samsung SoCs GPIO library support" - default y if SAMSUNG_GPIOLIB_4BIT - depends on ARM + default y + depends on ARM && SAMSUNG_GPIOLIB_4BIT help Say yes here to support Samsung SoCs GPIO library config GPIO_S5PC100 bool "Samsung S5PC100 GPIO library support" - default y if CPU_S5PC100 - depends on ARM + default y + depends on ARM && CPU_S5PC100 help Say yes here to support Samsung S5PC100 SoCs GPIO library config GPIO_S5PV210 bool "Samsung S5PV210/S5PC110 GPIO library support" - default y if CPU_S5PV210 - depends on ARM + default y + depends on ARM && CPU_S5PV210 help Say yes here to support Samsung S5PV210/S5PC110 SoCs GPIO library -- cgit v1.2.3 From 598e887d8b01655780c81cc86a9e7820ed091580 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 30 May 2011 11:38:06 +0200 Subject: x86 idle: Fix mwait deprecation warning message Fix: arch/x86/kernel/process.c:645:1: warning: unknown escape sequence '\i' due to missing escape backslash, introduced by this commit: 5d4c47e0195b: x86 idle: deprecate mwait_idle() and "idle=mwait" cmdline param Signed-off-by: Borislav Petkov Cc: Len Brown Cc: Linus Torvalds Link: http://lkml.kernel.org/r/1306748286-24701-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar --- arch/x86/kernel/process.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c index 426a5b66f7e4..3d83a71af7d5 100644 --- a/arch/x86/kernel/process.c +++ b/arch/x86/kernel/process.c @@ -642,7 +642,7 @@ static int __init idle_setup(char *str) boot_option_idle_override = IDLE_POLL; } else if (!strcmp(str, "mwait")) { boot_option_idle_override = IDLE_FORCE_MWAIT; - WARN_ONCE(1, "\idle=mwait\" will be removed in 2012\"\n"); + WARN_ONCE(1, "\"idle=mwait\" will be removed in 2012\"\n"); } else if (!strcmp(str, "halt")) { /* * When the boot option of idle=halt is added, halt is -- cgit v1.2.3 From 4f3c125c7420c85eaff627145557e392a871922d Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Mon, 30 May 2011 08:23:57 -0400 Subject: x86: Fix mwait_play_dead() faulting on mwait-incapable cpus MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A logic error in mwait_play_dead() causes the kernel to use mwait even on cpus which don't support it, such as KVM virtual cpus. Introduced by: 349c004e3d31: x86: A fast way to check capabilities of the current cpu Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=36222 Reported-by: Török Edwin Signed-off-by: Avi Kivity Cc: Christoph Lameter Cc: Tejun Heo Link: http://lkml.kernel.org/r/1306758237-9327-1-git-send-email-avi@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/smpboot.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index eefd96765e79..33a0c11797de 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1332,7 +1332,7 @@ static inline void mwait_play_dead(void) void *mwait_ptr; struct cpuinfo_x86 *c = __this_cpu_ptr(&cpu_info); - if (!this_cpu_has(X86_FEATURE_MWAIT) && mwait_usable(c)) + if (!(this_cpu_has(X86_FEATURE_MWAIT) && mwait_usable(c))) return; if (!this_cpu_has(X86_FEATURE_CLFLSH)) return; -- cgit v1.2.3 From cbf74cea070fa1f705de4712e25d9e56ae6543c7 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 30 May 2011 16:31:11 +0200 Subject: oprofile, x86: Add comments to IBS LVT offset initialization Adding a comment in the code as IBS LVT setup is not obvious at all ... Signed-off-by: Robert Richter --- arch/x86/kernel/apic/apic.c | 3 ++- arch/x86/oprofile/op_model_amd.c | 13 +++++++++---- 2 files changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index fabf01eff771..a0bf78a0918c 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -390,7 +390,8 @@ static unsigned int reserve_eilvt_offset(int offset, unsigned int new) /* * If mask=1, the LVT entry does not generate interrupts while mask=0 - * enables the vector. See also the BKDGs. + * enables the vector. See also the BKDGs. Must be called with + * preemption disabled. */ int setup_APIC_eilvt(u8 offset, u8 vector, u8 msg_type, u8 mask) diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c index 9fd8a567fe1e..9cbb710dc94b 100644 --- a/arch/x86/oprofile/op_model_amd.c +++ b/arch/x86/oprofile/op_model_amd.c @@ -609,16 +609,21 @@ static int setup_ibs_ctl(int ibs_eilvt_off) return 0; } +/* + * This runs only on the current cpu. We try to find an LVT offset and + * setup the local APIC. For this we must disable preemption. On + * success we initialize all nodes with this offset. This updates then + * the offset in the IBS_CTL per-node msr. The per-core APIC setup of + * the IBS interrupt vector is called from op_amd_setup_ctrs()/op_- + * amd_cpu_shutdown() using the new offset. + */ static int force_ibs_eilvt_setup(void) { int offset; int ret; - /* - * find the next free available EILVT entry, skip offset 0, - * pin search to this cpu - */ preempt_disable(); + /* find the next free available EILVT entry, skip offset 0 */ for (offset = 1; offset < APIC_EILVT_NR_MAX; offset++) { if (get_eilvt(offset)) break; -- cgit v1.2.3 From 194cd8dfc9e4f29249b3bd45c5cb5c0a33a6438c Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 31 May 2011 13:27:41 +0900 Subject: sh: asm/tlb.h needs linux/swap.h Commit 1e56a56410bb64bce62d44563e35a143fc2d515f introduced the mmu_gather rework for sh, but missed a linux/swap.h include: CC arch/sh/mm/tlb-urb.o In file included from arch/sh/mm/tlb-urb.c:14:0: arch/sh/include/asm/tlb.h: In function '__tlb_remove_page': arch/sh/include/asm/tlb.h:92:2: error: implicit declaration of function 'free_page_and_swap_cache' Signed-off-by: Nobuhiro Iwamatsu CC: Peter Zijlstra Signed-off-by: Paul Mundt --- arch/sh/include/asm/tlb.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h index 6c308d8b9a50..ec88bfcdf7ce 100644 --- a/arch/sh/include/asm/tlb.h +++ b/arch/sh/include/asm/tlb.h @@ -9,6 +9,7 @@ #include #ifdef CONFIG_MMU +#include #include #include #include -- cgit v1.2.3 From 65d517eb7224d24ee4206416161390f30d69e622 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 14:37:44 +0900 Subject: sh64: asm/pgtable.h needs asm/mmu.h Needed to satisfy the __in_29bit_mode() check. Signed-off-by: Paul Mundt --- arch/sh/include/asm/pgtable.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index db85916b9e95..9210e93a92c3 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -18,6 +18,7 @@ #include #endif #include +#include #ifndef __ASSEMBLY__ #include -- cgit v1.2.3 From 3f9b8520b06013939ad247ba08b69529b5f14be1 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 14:38:29 +0900 Subject: sh64: Move from P1SEG to CAC_ADDR for consistent sync. sh64 doesn't define a P1SEGADDR, resulting in a build failure. The proper mapping can be attained for both sh32 and 64 via the CAC_ADDR macro, so switch to that instead. Signed-off-by: Paul Mundt --- arch/sh/mm/consistent.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 40733a952402..f251b5f27652 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -82,7 +82,7 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, void *addr; addr = __in_29bit_mode() ? - (void *)P1SEGADDR((unsigned long)vaddr) : vaddr; + (void *)CAC_ADDR((unsigned long)vaddr) : vaddr; switch (direction) { case DMA_FROM_DEVICE: /* invalidate only */ -- cgit v1.2.3 From db7eba292e913390fa881272bfbc3da0a5380513 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 14:39:49 +0900 Subject: sh: Fix up asm-generic/ptrace.h fallout. There was an ordering issue with regards to instruction_pointer() being used in profile_pc() prior to the asm-generic/ptrace.h include, which subsequently provided the instruction_pointer() definition. In the interest of simplicity we simply open-code the regs->pc deref for the profile_pc() definition instead. The FP functions were also broken due to a lack of a common regs->fp, so provide a common GET_FP() that is safe for both architectures in order to fix up the frame pointer helpers too. Signed-off-by: Paul Mundt --- arch/sh/include/asm/ptrace.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index 40725b4a8018..88bd6be168a9 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -41,7 +41,9 @@ #define user_mode(regs) (((regs)->sr & 0x40000000)==0) #define kernel_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15]) -#define GET_USP(regs) ((regs)->regs[15]) + +#define GET_FP(regs) ((regs)->regs[14]) +#define GET_USP(regs) ((regs)->regs[15]) extern void show_regs(struct pt_regs *); @@ -131,7 +133,7 @@ extern void ptrace_triggered(struct perf_event *bp, int nmi, static inline unsigned long profile_pc(struct pt_regs *regs) { - unsigned long pc = instruction_pointer(regs); + unsigned long pc = regs->pc; if (virt_addr_uncached(pc)) return CAC_ADDR(pc); -- cgit v1.2.3 From d4905ce38c73964b868037e49a5945e1cf47a7f2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 15:23:20 +0900 Subject: Revert "clocksource: sh_tmu: Runtime PM support" This reverts commit 1b842e91fea9447eff5eb687e28ad61c02f5033e. There is a fundamental ordering race between the early and late probe paths and the runtime PM tie-in that results in __pm_runtime_resume() attempting to take a lock that hasn't been initialized yet (which by proxy also suggests that pm_runtime_init() hasn't yet been run on the device either, making the entire thing unsafe) -- resulting in instant death on SMP or on UP with spinlock debugging enabled: sh_tmu.0: used for clock events sh_tmu.0: used for periodic clock events BUG: spinlock trylock failure on UP on CPU#0, swapper/0 lock: 804db198, .magic: 00000000, .owner: /-1, .owner_cpu: 0 ... Revert it for now until the ordering issues can be resolved, or we can get some more help from the runtime PM framework to make this possible. Signed-off-by: Paul Mundt --- drivers/clocksource/sh_tmu.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/clocksource/sh_tmu.c b/drivers/clocksource/sh_tmu.c index 17296288a205..808135768617 100644 --- a/drivers/clocksource/sh_tmu.c +++ b/drivers/clocksource/sh_tmu.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include #include @@ -110,12 +109,10 @@ static int sh_tmu_enable(struct sh_tmu_priv *p) { int ret; - /* wake up device and enable clock */ - pm_runtime_get_sync(&p->pdev->dev); + /* enable clock */ ret = clk_enable(p->clk); if (ret) { dev_err(&p->pdev->dev, "cannot enable clock\n"); - pm_runtime_put_sync(&p->pdev->dev); return ret; } @@ -144,9 +141,8 @@ static void sh_tmu_disable(struct sh_tmu_priv *p) /* disable interrupts in TMU block */ sh_tmu_write(p, TCR, 0x0000); - /* stop clock and mark device as idle */ + /* stop clock */ clk_disable(p->clk); - pm_runtime_put_sync(&p->pdev->dev); } static void sh_tmu_set_next(struct sh_tmu_priv *p, unsigned long delta, @@ -415,7 +411,6 @@ static int __devinit sh_tmu_probe(struct platform_device *pdev) if (p) { dev_info(&pdev->dev, "kept as earlytimer\n"); - pm_runtime_enable(&pdev->dev); return 0; } @@ -430,9 +425,6 @@ static int __devinit sh_tmu_probe(struct platform_device *pdev) kfree(p); platform_set_drvdata(pdev, NULL); } - - if (!is_early_platform_device(pdev)) - pm_runtime_enable(&pdev->dev); return ret; } -- cgit v1.2.3 From 9436b4abec28a22edd961ae375535d940625f1f2 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 15:26:42 +0900 Subject: Revert "clocksource: sh_cmt: Runtime PM support" This reverts commit 01fa68b58492a5d6708a91c1f474b6a099a9509e. The same note as per the sh_tmu change applies here, too. Signed-off-by: Paul Mundt --- drivers/clocksource/sh_cmt.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c index 036e5865eb40..dc7c033ef587 100644 --- a/drivers/clocksource/sh_cmt.c +++ b/drivers/clocksource/sh_cmt.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include #include @@ -153,12 +152,10 @@ static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate) { int ret; - /* wake up device and enable clock */ - pm_runtime_get_sync(&p->pdev->dev); + /* enable clock */ ret = clk_enable(p->clk); if (ret) { dev_err(&p->pdev->dev, "cannot enable clock\n"); - pm_runtime_put_sync(&p->pdev->dev); return ret; } @@ -190,9 +187,8 @@ static void sh_cmt_disable(struct sh_cmt_priv *p) /* disable interrupts in CMT block */ sh_cmt_write(p, CMCSR, 0); - /* stop clock and mark device as idle */ + /* stop clock */ clk_disable(p->clk); - pm_runtime_put_sync(&p->pdev->dev); } /* private flags */ @@ -664,7 +660,6 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) if (p) { dev_info(&pdev->dev, "kept as earlytimer\n"); - pm_runtime_enable(&pdev->dev); return 0; } @@ -679,9 +674,6 @@ static int __devinit sh_cmt_probe(struct platform_device *pdev) kfree(p); platform_set_drvdata(pdev, NULL); } - - if (!is_early_platform_device(pdev)) - pm_runtime_enable(&pdev->dev); return ret; } -- cgit v1.2.3 From 5c2de44417523385010b529599a2b30f290831a3 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 31 May 2011 15:53:03 +0900 Subject: dmaengine: shdma: Fix up fallout from runtime PM changes. The runtime PM changes introduce sh_dmae_rst() wrapping via the runtime_resume helper, depending on dev_get_drvdata() to fetch the platform data needed for the DMAOR initialization default at a time where drvdata hasn't yet been established by the probe path, resulting in general probe misery: Unable to handle kernel NULL pointer dereference at virtual address 000000c4 pc = 8025adee *pde = 00000000 Oops: 0000 [#1] Modules linked in: Pid : 1, Comm: swapper CPU : 0 Not tainted (3.0.0-rc1-00012-g9436b4a-dirty #1456) PC is at sh_dmae_rst+0x28/0x86 PR is at sh_dmae_rst+0x22/0x86 PC : 8025adee SP : 9e803d10 SR : 400080f1 TEA : 000000c4 R0 : 000000c4 R1 : 0000fff8 R2 : 00000000 R3 : 00000040 R4 : 000000f0 R5 : 00000000 R6 : 00000000 R7 : 804f184c R8 : 00000000 R9 : 804dd0e8 R10 : 80283204 R11 : ffffffda R12 : 000000a0 R13 : 804dd18c R14 : 9e803d10 MACH: 00000000 MACL: 00008f20 GBR : 00000000 PR : 8025ade8 Call trace: [<8025ae70>] sh_dmae_runtime_resume+0x24/0x34 [<80283238>] pm_generic_runtime_resume+0x34/0x3c [<80283370>] rpm_callback+0x4a/0x7e [<80283efc>] rpm_resume+0x240/0x384 [<80283f54>] rpm_resume+0x298/0x384 [<8028428c>] __pm_runtime_resume+0x44/0x7c [<8038a358>] __ioremap_caller+0x0/0xec [<80284296>] __pm_runtime_resume+0x4e/0x7c [<8038a358>] __ioremap_caller+0x0/0xec [<80666254>] sh_dmae_probe+0x180/0x6a0 [<802803ae>] platform_drv_probe+0x26/0x2e Fix up the ordering accordingly. Signed-off-by: Paul Mundt --- drivers/dma/shdma.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c index 636e40925b16..727e76ff13e1 100644 --- a/drivers/dma/shdma.c +++ b/drivers/dma/shdma.c @@ -1144,6 +1144,8 @@ static int __init sh_dmae_probe(struct platform_device *pdev) /* platform data */ shdev->pdata = pdata; + platform_set_drvdata(pdev, shdev); + pm_runtime_enable(&pdev->dev); pm_runtime_get_sync(&pdev->dev); @@ -1256,7 +1258,6 @@ static int __init sh_dmae_probe(struct platform_device *pdev) pm_runtime_put(&pdev->dev); - platform_set_drvdata(pdev, shdev); dma_async_device_register(&shdev->common); return err; @@ -1278,6 +1279,8 @@ rst_err: if (dmars) iounmap(shdev->dmars); + + platform_set_drvdata(pdev, NULL); emapdmars: iounmap(shdev->chan_reg); synchronize_rcu(); @@ -1316,6 +1319,8 @@ static int __exit sh_dmae_remove(struct platform_device *pdev) iounmap(shdev->dmars); iounmap(shdev->chan_reg); + platform_set_drvdata(pdev, NULL); + synchronize_rcu(); kfree(shdev); -- cgit v1.2.3 From d72bce0e67e8afc6eb959f656013cbb577426f1e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 30 May 2011 13:34:51 +0200 Subject: rcu: Cure load woes Commit cc3ce5176d83 (rcu: Start RCU kthreads in TASK_INTERRUPTIBLE state) fudges a sleeping task' state, resulting in the scheduler seeing a TASK_UNINTERRUPTIBLE task going to sleep, but a TASK_INTERRUPTIBLE task waking up. The result is unbalanced load calculation. The problem that patch tried to address is that the RCU threads could stay in UNINTERRUPTIBLE state for quite a while and triggering the hung task detector due to on-demand wake-ups. Cure the problem differently by always giving the tasks at least one wake-up once the CPU is fully up and running, this will kick them out of the initial UNINTERRUPTIBLE state and into the regular INTERRUPTIBLE wait state. [ The alternative would be teaching kthread_create() to start threads as INTERRUPTIBLE but that needs a tad more thought. ] Reported-by: Damien Wyart Signed-off-by: Peter Zijlstra Acked-by: Paul E. McKenney Link: http://lkml.kernel.org/r/1306755291.1200.2872.camel@twins Signed-off-by: Ingo Molnar --- kernel/rcutree.c | 54 +++++++++++++++++++++++++++++++++++++++++-------- kernel/rcutree_plugin.h | 11 +++++++++- 2 files changed, 56 insertions(+), 9 deletions(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 77a7671dd147..89419ff92e99 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1648,7 +1648,6 @@ static int __cpuinit rcu_spawn_one_cpu_kthread(int cpu) if (IS_ERR(t)) return PTR_ERR(t); kthread_bind(t, cpu); - set_task_state(t, TASK_INTERRUPTIBLE); per_cpu(rcu_cpu_kthread_cpu, cpu) = cpu; WARN_ON_ONCE(per_cpu(rcu_cpu_kthread_task, cpu) != NULL); per_cpu(rcu_cpu_kthread_task, cpu) = t; @@ -1756,7 +1755,6 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp, if (IS_ERR(t)) return PTR_ERR(t); raw_spin_lock_irqsave(&rnp->lock, flags); - set_task_state(t, TASK_INTERRUPTIBLE); rnp->node_kthread_task = t; raw_spin_unlock_irqrestore(&rnp->lock, flags); sp.sched_priority = 99; @@ -1765,6 +1763,8 @@ static int __cpuinit rcu_spawn_one_node_kthread(struct rcu_state *rsp, return rcu_spawn_one_boost_kthread(rsp, rnp, rnp_index); } +static void rcu_wake_one_boost_kthread(struct rcu_node *rnp); + /* * Spawn all kthreads -- called as soon as the scheduler is running. */ @@ -1772,18 +1772,30 @@ static int __init rcu_spawn_kthreads(void) { int cpu; struct rcu_node *rnp; + struct task_struct *t; rcu_kthreads_spawnable = 1; for_each_possible_cpu(cpu) { per_cpu(rcu_cpu_has_work, cpu) = 0; - if (cpu_online(cpu)) + if (cpu_online(cpu)) { (void)rcu_spawn_one_cpu_kthread(cpu); + t = per_cpu(rcu_cpu_kthread_task, cpu); + if (t) + wake_up_process(t); + } } rnp = rcu_get_root(rcu_state); (void)rcu_spawn_one_node_kthread(rcu_state, rnp); + if (rnp->node_kthread_task) + wake_up_process(rnp->node_kthread_task); if (NUM_RCU_NODES > 1) { - rcu_for_each_leaf_node(rcu_state, rnp) + rcu_for_each_leaf_node(rcu_state, rnp) { (void)rcu_spawn_one_node_kthread(rcu_state, rnp); + t = rnp->node_kthread_task; + if (t) + wake_up_process(t); + rcu_wake_one_boost_kthread(rnp); + } } return 0; } @@ -2188,14 +2200,14 @@ rcu_init_percpu_data(int cpu, struct rcu_state *rsp, int preemptible) raw_spin_unlock_irqrestore(&rsp->onofflock, flags); } -static void __cpuinit rcu_online_cpu(int cpu) +static void __cpuinit rcu_prepare_cpu(int cpu) { rcu_init_percpu_data(cpu, &rcu_sched_state, 0); rcu_init_percpu_data(cpu, &rcu_bh_state, 0); rcu_preempt_init_percpu_data(cpu); } -static void __cpuinit rcu_online_kthreads(int cpu) +static void __cpuinit rcu_prepare_kthreads(int cpu) { struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu); struct rcu_node *rnp = rdp->mynode; @@ -2208,6 +2220,31 @@ static void __cpuinit rcu_online_kthreads(int cpu) } } +/* + * kthread_create() creates threads in TASK_UNINTERRUPTIBLE state, + * but the RCU threads are woken on demand, and if demand is low this + * could be a while triggering the hung task watchdog. + * + * In order to avoid this, poke all tasks once the CPU is fully + * up and running. + */ +static void __cpuinit rcu_online_kthreads(int cpu) +{ + struct rcu_data *rdp = per_cpu_ptr(rcu_state->rda, cpu); + struct rcu_node *rnp = rdp->mynode; + struct task_struct *t; + + t = per_cpu(rcu_cpu_kthread_task, cpu); + if (t) + wake_up_process(t); + + t = rnp->node_kthread_task; + if (t) + wake_up_process(t); + + rcu_wake_one_boost_kthread(rnp); +} + /* * Handle CPU online/offline notification events. */ @@ -2221,10 +2258,11 @@ static int __cpuinit rcu_cpu_notify(struct notifier_block *self, switch (action) { case CPU_UP_PREPARE: case CPU_UP_PREPARE_FROZEN: - rcu_online_cpu(cpu); - rcu_online_kthreads(cpu); + rcu_prepare_cpu(cpu); + rcu_prepare_kthreads(cpu); break; case CPU_ONLINE: + rcu_online_kthreads(cpu); case CPU_DOWN_FAILED: rcu_node_kthread_setaffinity(rnp, -1); rcu_cpu_kthread_setrt(cpu, 1); diff --git a/kernel/rcutree_plugin.h b/kernel/rcutree_plugin.h index a767b7dac365..c8bff3099a89 100644 --- a/kernel/rcutree_plugin.h +++ b/kernel/rcutree_plugin.h @@ -1295,7 +1295,6 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, if (IS_ERR(t)) return PTR_ERR(t); raw_spin_lock_irqsave(&rnp->lock, flags); - set_task_state(t, TASK_INTERRUPTIBLE); rnp->boost_kthread_task = t; raw_spin_unlock_irqrestore(&rnp->lock, flags); sp.sched_priority = RCU_KTHREAD_PRIO; @@ -1303,6 +1302,12 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, return 0; } +static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp) +{ + if (rnp->boost_kthread_task) + wake_up_process(rnp->boost_kthread_task); +} + #else /* #ifdef CONFIG_RCU_BOOST */ static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags) @@ -1326,6 +1331,10 @@ static int __cpuinit rcu_spawn_one_boost_kthread(struct rcu_state *rsp, return 0; } +static void __cpuinit rcu_wake_one_boost_kthread(struct rcu_node *rnp) +{ +} + #endif /* #else #ifdef CONFIG_RCU_BOOST */ #ifndef CONFIG_SMP -- cgit v1.2.3 From 1adffbae22332bb558c2a29de19d9aca391869f6 Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Tue, 31 May 2011 19:38:07 +0900 Subject: fat: Fix corrupt inode flags when remove ATTR_SYS flag We are clearly missing '~' in fat_ioctl_set_attributes(). Cc: Reported-by: Dmitry Dmitriev Signed-off-by: OGAWA Hirofumi --- fs/fat/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fat/file.c b/fs/fat/file.c index 7257752b6d5d..7018e1d8902d 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -102,7 +102,7 @@ static int fat_ioctl_set_attributes(struct file *file, u32 __user *user_attr) if (attr & ATTR_SYS) inode->i_flags |= S_IMMUTABLE; else - inode->i_flags &= S_IMMUTABLE; + inode->i_flags &= ~S_IMMUTABLE; } fat_save_attrs(inode, attr); -- cgit v1.2.3 From 339dedf709e21d5718d6596750166f70e8bed40a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 31 May 2011 18:01:23 +1000 Subject: powerpc/pmac: Don't register pmac PIC syscore ops when HW not present The Apple custom PIC only exist in some earlier machine models, anything with an MPIC will crash on suspend if we register those syscore ops unconditionally. This is a regression caused by commit f5a592f7d74e ("PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM") Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/powerpc/platforms/powermac/pic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 9089b0421191..7667db448aa7 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -715,7 +715,8 @@ static struct syscore_ops pmacpic_syscore_ops = { static int __init init_pmacpic_syscore(void) { - register_syscore_ops(&pmacpic_syscore_ops); + if (pmac_irq_hw[0]) + register_syscore_ops(&pmacpic_syscore_ops); return 0; } -- cgit v1.2.3 From ea9d6553b3b3044e7374774cc33bb1b2eee19dd3 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 31 May 2011 13:45:53 +0200 Subject: block: remove unwanted semicolons Since those defined functions require additional semicolon from the caller, they could cause potential syntax errors when used in if-else statements. Signed-off-by: Namhyung Kim Acked-by: Martin K. Petersen Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ae9091a68480..1a23722e8878 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -1282,8 +1282,8 @@ queue_max_integrity_segments(struct request_queue *q) #define blk_get_integrity(a) (0) #define blk_integrity_compare(a, b) (0) #define blk_integrity_register(a, b) (0) -#define blk_integrity_unregister(a) do { } while (0); -#define blk_queue_max_integrity_segments(a, b) do { } while (0); +#define blk_integrity_unregister(a) do { } while (0) +#define blk_queue_max_integrity_segments(a, b) do { } while (0) #define queue_max_integrity_segments(a) (0) #define blk_integrity_merge_rq(a, b, c) (0) #define blk_integrity_merge_bio(a, b, c) (0) -- cgit v1.2.3 From 74c355fbdfedd3820046dba4f537876cea54c207 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 30 May 2011 16:48:06 +0200 Subject: perf, cgroups: Fix up for new API Ben changed the cgroup API in commit f780bdb7c1c (cgroups: add per-thread subsystem callbacks) in an incompatible way, but forgot to convert the perf cgroup bits. Avoid compile warnings and runtime splats and convert perf too ;-) Acked-by: Ben Blum Cc: Stephane Eranian Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1306767651.1200.2990.camel@twins Signed-off-by: Ingo Molnar --- kernel/events/core.c | 22 ++++------------------ 1 file changed, 4 insertions(+), 18 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index c09767f7db3e..8a15944bf9d2 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -7394,26 +7394,12 @@ static int __perf_cgroup_move(void *info) return 0; } -static void perf_cgroup_move(struct task_struct *task) +static void +perf_cgroup_attach_task(struct cgroup *cgrp, struct task_struct *task) { task_function_call(task, __perf_cgroup_move, task); } -static void perf_cgroup_attach(struct cgroup_subsys *ss, struct cgroup *cgrp, - struct cgroup *old_cgrp, struct task_struct *task, - bool threadgroup) -{ - perf_cgroup_move(task); - if (threadgroup) { - struct task_struct *c; - rcu_read_lock(); - list_for_each_entry_rcu(c, &task->thread_group, thread_group) { - perf_cgroup_move(c); - } - rcu_read_unlock(); - } -} - static void perf_cgroup_exit(struct cgroup_subsys *ss, struct cgroup *cgrp, struct cgroup *old_cgrp, struct task_struct *task) { @@ -7425,7 +7411,7 @@ static void perf_cgroup_exit(struct cgroup_subsys *ss, struct cgroup *cgrp, if (!(task->flags & PF_EXITING)) return; - perf_cgroup_move(task); + perf_cgroup_attach_task(cgrp, task); } struct cgroup_subsys perf_subsys = { @@ -7434,6 +7420,6 @@ struct cgroup_subsys perf_subsys = { .create = perf_cgroup_create, .destroy = perf_cgroup_destroy, .exit = perf_cgroup_exit, - .attach = perf_cgroup_attach, + .attach_task = perf_cgroup_attach_task, }; #endif /* CONFIG_CGROUP_PERF */ -- cgit v1.2.3 From 046d886db18260d4435c942985392b7ef872337f Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Tue, 31 May 2011 00:44:31 +0200 Subject: OMAP: fix compilation error Forward-declare platform_device structure in arch/arm/plat-omap/include/plat/flash.h, otherwise compilation may break with: In file included from arch/arm/mach-omap1/flash.c:15: arch/arm/plat-omap/include/plat/flash.h:14: warning: 'struct platform_device' declared inside parameter list arch/arm/plat-omap/include/plat/flash.h:14: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/mach-omap1/flash.c:16: warning: 'struct platform_device' declared inside parameter list arch/arm/mach-omap1/flash.c:17: error: conflicting types for 'omap1_set_vpp' arch/arm/plat-omap/include/plat/flash.h:14: error: previous declaration of 'omap1_set_vpp' was here Detected and corrected while building for Amstrad Delta, confirmed with omap1_defconfig. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/plat-omap/include/plat/flash.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h index 3083195123ea..0d88499b79e9 100644 --- a/arch/arm/plat-omap/include/plat/flash.h +++ b/arch/arm/plat-omap/include/plat/flash.h @@ -11,6 +11,7 @@ #include +struct platform_device; extern void omap1_set_vpp(struct platform_device *pdev, int enable); #endif -- cgit v1.2.3 From f9fa1bb9d7a3c9537d6abd4ad47c58fe27862625 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 31 May 2011 20:55:44 +0800 Subject: ARM: OMAP2: Add missing include of linux/gpio.h I got some build error like below while executing "make omap2plus_defconfig". CC arch/arm/mach-omap2/board-2430sdp.o arch/arm/mach-omap2/board-2430sdp.c: In function 'omap_2430sdp_init': arch/arm/mach-omap2/board-2430sdp.c:247: error: 'GPIOF_OUT_INIT_LOW' undeclared (first use in this function) arch/arm/mach-omap2/board-2430sdp.c:247: error: (Each undeclared identifier is reported only once arch/arm/mach-omap2/board-2430sdp.c:247: error: for each function it appears in.) This patch fixes the build error by include linux/gpio.h instead of mach/gpio.h. Signed-off-by: Axel Lin Cc: Syed Mohammed Khasim Cc: Grazvydas Ignotas Cc: Steve Sakoman Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-2430sdp.c | 2 +- arch/arm/mach-omap2/board-apollon.c | 2 +- arch/arm/mach-omap2/board-omap3pandora.c | 2 +- arch/arm/mach-omap2/board-overo.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index d54969be0a54..5de6eac0a725 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -26,13 +26,13 @@ #include #include #include +#include #include #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index f3beb8eeef77..b124bdfb4239 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -27,13 +27,13 @@ #include #include #include +#include #include #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1d10736c6d3c..5ee034a54afa 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -41,7 +42,6 @@ #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 1555918e3ffa..9952c20b1ee0 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -45,7 +46,6 @@ #include #include