From bc0784d951470ca6597239f1bae6e59caf49fb10 Mon Sep 17 00:00:00 2001 From: Ben Greear Date: Wed, 12 Dec 2012 16:56:20 -0800 Subject: mac80211: Allow disabling SGI-20 This allows user-space (wpa_supplicant) to disable short guard interval (SGI) for 20Mhz. The SGI-40 disable option is already handled. Signed-off-by: Ben Greear Signed-off-by: Johannes Berg --- net/mac80211/ht.c | 3 +++ net/mac80211/main.c | 1 + 2 files changed, 4 insertions(+) diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index a71d891794a4..8a6d68f1f404 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -62,6 +62,9 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, __check_htcap_disable(sdata, ht_cap, IEEE80211_HT_CAP_SUP_WIDTH_20_40); __check_htcap_disable(sdata, ht_cap, IEEE80211_HT_CAP_SGI_40); + /* Allow user to disable SGI-20 (SGI-40 is handled above) */ + __check_htcap_disable(sdata, ht_cap, IEEE80211_HT_CAP_SGI_20); + /* Allow user to disable the max-AMSDU bit. */ __check_htcap_disable(sdata, ht_cap, IEEE80211_HT_CAP_MAX_AMSDU); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 1b087fff93e7..0c0d4cabd76c 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -537,6 +537,7 @@ static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = { .cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_MAX_AMSDU | + IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40), .mcs = { .rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff, -- cgit v1.2.3 From f4eabc918c3b88763bc20dd9e2b248aa6c757005 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 13 Dec 2012 18:59:57 +0800 Subject: mac80211: use short slot time in mesh for 5GHz Use short slot time in 5GHz for mesh. The performance is increased from 16.4Mbps to 23.4Mbps for two directly connected mesh STAs operating in legacy rate using iperf measurement. Almost similar to the results claimed in IBSS mode. Signed-off-by: Chun-Yeow Yeoh [call ieee80211_get_sdata_band() only once] Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 649ad513547f..8565c00cb644 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -607,6 +607,12 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; + u32 changed = BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED | + BSS_CHANGED_HT | + BSS_CHANGED_BASIC_RATES | + BSS_CHANGED_BEACON_INT; + enum ieee80211_band band = ieee80211_get_sdata_band(sdata); local->fif_other_bss++; /* mesh ifaces must set allmulti to forward mcast traffic */ @@ -626,13 +632,14 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) ifmsh->mshcfg.ht_opmode; sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; sdata->vif.bss_conf.basic_rates = - ieee80211_mandatory_rates(sdata->local, - ieee80211_get_sdata_band(sdata)); - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON | - BSS_CHANGED_BEACON_ENABLED | - BSS_CHANGED_HT | - BSS_CHANGED_BASIC_RATES | - BSS_CHANGED_BEACON_INT); + ieee80211_mandatory_rates(local, band); + + if (band == IEEE80211_BAND_5GHZ) { + sdata->vif.bss_conf.use_short_slot = true; + changed |= BSS_CHANGED_ERP_SLOT; + } + + ieee80211_bss_info_change_notify(sdata, changed); netif_carrier_on(sdata->dev); } -- cgit v1.2.3 From a357d7f9855e3002d6aaaea5c40dd1ac02b78de7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 10 Dec 2012 11:57:42 +0100 Subject: mac80211_hwsim: allow testing paged RX Paged RX, i.e. SKBs with (some of) the data in pages instead of the SKB header data (skb->data) can behave differently in the stack and cause other bugs. To make debugging easier add an option to hwsim to test with such SKBs. Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index ff9085502bea..145498f8411f 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -48,6 +48,10 @@ static int channels = 1; module_param(channels, int, 0444); MODULE_PARM_DESC(channels, "Number of concurrent channels"); +static bool paged_rx = false; +module_param(paged_rx, bool, 0644); +MODULE_PARM_DESC(paged_rx, "Use paged SKBs for RX instead of linear ones"); + /** * enum hwsim_regtest - the type of regulatory tests we offer * @@ -755,9 +759,25 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw, * reserve some space for our vendor and the normal * radiotap header, since we're copying anyway */ - nskb = skb_copy_expand(skb, 64, 0, GFP_ATOMIC); - if (nskb == NULL) - continue; + if (skb->len < PAGE_SIZE && paged_rx) { + struct page *page = alloc_page(GFP_ATOMIC); + + if (!page) + continue; + + nskb = dev_alloc_skb(128); + if (!nskb) { + __free_page(page); + continue; + } + + memcpy(page_address(page), skb->data, skb->len); + skb_add_rx_frag(nskb, 0, page, 0, skb->len, skb->len); + } else { + nskb = skb_copy(skb, GFP_ATOMIC); + if (!nskb) + continue; + } if (mac80211_hwsim_addr_match(data2, hdr->addr1)) ack = true; -- cgit v1.2.3 From 0f6dfcee2e081f47a3e97cb8984fb4d62217e6f7 Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Tue, 18 Dec 2012 09:55:33 +0200 Subject: wireless: more 'capability info' bits define bits for 'capability info', as in recent spec edition IEEE802.11-2012 Also, add mask for 2-bit field 'bss type', as it is in 802.11ad Signed-off-by: Vladimir Kondratiev Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index f0859cc73861..09879eb24380 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1311,16 +1311,21 @@ struct ieee80211_vht_operation { #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8) #define WLAN_CAPABILITY_QOS (1<<9) #define WLAN_CAPABILITY_SHORT_SLOT_TIME (1<<10) +#define WLAN_CAPABILITY_APSD (1<<11) +#define WLAN_CAPABILITY_RADIO_MEASURE (1<<12) #define WLAN_CAPABILITY_DSSS_OFDM (1<<13) +#define WLAN_CAPABILITY_DEL_BACK (1<<14) +#define WLAN_CAPABILITY_IMM_BACK (1<<15) /* DMG (60gHz) 802.11ad */ /* type - bits 0..1 */ +#define WLAN_CAPABILITY_DMG_TYPE_MASK (3<<0) #define WLAN_CAPABILITY_DMG_TYPE_IBSS (1<<0) /* Tx by: STA */ #define WLAN_CAPABILITY_DMG_TYPE_PBSS (2<<0) /* Tx by: PCP */ #define WLAN_CAPABILITY_DMG_TYPE_AP (3<<0) /* Tx by: AP */ #define WLAN_CAPABILITY_DMG_CBAP_ONLY (1<<2) -#define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3) +#define WLAN_CAPABILITY_DMG_CBAP_SOURCE (1<<3) #define WLAN_CAPABILITY_DMG_PRIVACY (1<<4) #define WLAN_CAPABILITY_DMG_ECPAC (1<<5) -- cgit v1.2.3 From b998e8bb3e1c6eeae5eab9d6a434563270286c3b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 23:07:46 +0100 Subject: mac80211: remove final sta_info_flush() When all interfaces have been removed, there can't be any stations left over, so there's no need to flush again. Remove this, and all code associated with it, which also simplifies the function. Tested-by: Ben Greear Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 7 +++---- net/mac80211/ibss.c | 4 ++-- net/mac80211/iface.c | 5 ++--- net/mac80211/mesh.c | 2 +- net/mac80211/mlme.c | 2 +- net/mac80211/sta_info.c | 23 ++++++----------------- net/mac80211/sta_info.h | 3 +-- 7 files changed, 16 insertions(+), 30 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 47e0aca614b7..be019533b233 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1010,8 +1010,8 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) kfree_rcu(old_probe_resp, rcu_head); list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - sta_info_flush(local, vlan); - sta_info_flush(local, sdata); + sta_info_flush(vlan); + sta_info_flush(sdata); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); drv_stop_ap(sdata->local, sdata); @@ -1301,7 +1301,6 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, u8 *mac) { - struct ieee80211_local *local = wiphy_priv(wiphy); struct ieee80211_sub_if_data *sdata; sdata = IEEE80211_DEV_TO_SUB_IF(dev); @@ -1309,7 +1308,7 @@ static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev, if (mac) return sta_info_destroy_addr_bss(sdata, mac); - sta_info_flush(local, sdata); + sta_info_flush(sdata); return 0; } diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 6b7644e818d8..854de974dc9a 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -67,7 +67,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, skb_reserve(skb, sdata->local->hw.extra_tx_headroom); if (!ether_addr_equal(ifibss->bssid, bssid)) - sta_info_flush(sdata->local, sdata); + sta_info_flush(sdata); /* if merging, indicate to driver that we leave the old IBSS */ if (sdata->vif.bss_conf.ibss_joined) { @@ -1182,7 +1182,7 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) memset(ifibss->bssid, 0, ETH_ALEN); ifibss->ssid_len = 0; - sta_info_flush(sdata->local, sdata); + sta_info_flush(sdata); spin_lock_bh(&ifibss->incomplete_lock); while (!list_empty(&ifibss->incomplete_stations)) { diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 8be854e86cd9..ecf7d15eaa5e 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -776,7 +776,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, * all other modes we've already removed all stations when * disconnecting etc. */ - sta_info_flush(local, sdata); + sta_info_flush(sdata); /* * Don't count this interface for promisc/allmulti while it @@ -961,7 +961,6 @@ static void ieee80211_set_multicast_list(struct net_device *dev) */ static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata) { - struct ieee80211_local *local = sdata->local; int flushed; int i; @@ -977,7 +976,7 @@ static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata) if (ieee80211_vif_is_mesh(&sdata->vif)) mesh_rmc_free(sdata); - flushed = sta_info_flush(local, sdata); + flushed = sta_info_flush(sdata); WARN_ON(flushed); } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 8565c00cb644..8a9d5d03bbc2 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -656,7 +656,7 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); /* flush STAs and mpaths on this iface */ - sta_info_flush(sdata->local, sdata); + sta_info_flush(sdata); mesh_path_flush_by_iface(sdata); del_timer_sync(&sdata->u.mesh.housekeeping_timer); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a3552929a21d..6d61d2f88716 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1521,7 +1521,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, memset(ifmgd->bssid, 0, ETH_ALEN); /* remove AP and TDLS peers */ - sta_info_flush(local, sdata); + sta_info_flush(sdata); /* finally reset all BSS / config parameters */ changed |= ieee80211_reset_erp_info(sdata); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index ca9fde198188..d743645a17b5 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -885,7 +885,6 @@ void sta_info_init(struct ieee80211_local *local) void sta_info_stop(struct ieee80211_local *local) { del_timer_sync(&local->sta_cleanup); - sta_info_flush(local, NULL); } /** @@ -893,12 +892,11 @@ void sta_info_stop(struct ieee80211_local *local) * * Returns the number of removed STA entries. * - * @local: local interface data - * @sdata: matching rule for the net device (sta->dev) or %NULL to match all STAs + * @sdata: sdata to remove all stations from */ -int sta_info_flush(struct ieee80211_local *local, - struct ieee80211_sub_if_data *sdata) +int sta_info_flush(struct ieee80211_sub_if_data *sdata) { + struct ieee80211_local *local = sdata->local; struct sta_info *sta, *tmp; int ret = 0; @@ -906,7 +904,7 @@ int sta_info_flush(struct ieee80211_local *local, mutex_lock(&local->sta_mtx); list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { - if (!sdata || sdata == sta->sdata) { + if (sdata == sta->sdata) { WARN_ON(__sta_info_destroy(sta)); ret++; } @@ -915,17 +913,8 @@ int sta_info_flush(struct ieee80211_local *local, rcu_barrier(); - if (sdata) { - ieee80211_cleanup_sdata_stas(sdata); - cancel_work_sync(&sdata->cleanup_stations_wk); - } else { - mutex_lock(&local->iflist_mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - ieee80211_cleanup_sdata_stas(sdata); - cancel_work_sync(&sdata->cleanup_stations_wk); - } - mutex_unlock(&local->iflist_mtx); - } + ieee80211_cleanup_sdata_stas(sdata); + cancel_work_sync(&sdata->cleanup_stations_wk); return ret; } diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 37c1889afd3a..13698dae6a88 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -548,8 +548,7 @@ void sta_info_recalc_tim(struct sta_info *sta); void sta_info_init(struct ieee80211_local *local); void sta_info_stop(struct ieee80211_local *local); -int sta_info_flush(struct ieee80211_local *local, - struct ieee80211_sub_if_data *sdata); +int sta_info_flush(struct ieee80211_sub_if_data *sdata); void sta_set_rate_info_tx(struct sta_info *sta, const struct ieee80211_tx_rate *rate, struct rate_info *rinfo); -- cgit v1.2.3 From 09f4114e02aac9cbf40553a17580b07ab29715d8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 23:26:57 +0100 Subject: mac80211: warn if unexpectedly removing stations When an interface is brought down it must have been disconnected (or similar) in all modes other than WDS, so warn if any stations were removed in other modes. Tested-by: Ben Greear Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index ecf7d15eaa5e..604b4aae3364 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -747,7 +747,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, unsigned long flags; struct sk_buff *skb, *tmp; u32 hw_reconf_flags = 0; - int i; + int i, flushed; clear_bit(SDATA_STATE_RUNNING, &sdata->state); @@ -772,11 +772,13 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, * (because if we remove a STA after ops->remove_interface() * the driver will have removed the vif info already!) * - * This is relevant only in AP, WDS and mesh modes, since in - * all other modes we've already removed all stations when - * disconnecting etc. + * This is relevant only in WDS mode, in all other modes we've + * already removed all stations when disconnecting or similar, + * so warn otherwise. */ - sta_info_flush(sdata); + flushed = sta_info_flush(sdata); + WARN_ON_ONCE((sdata->vif.type != NL80211_IFTYPE_WDS && flushed > 0) || + (sdata->vif.type == NL80211_IFTYPE_WDS && flushed != 1)); /* * Don't count this interface for promisc/allmulti while it -- cgit v1.2.3 From 051007d9e281cd8ea603a4cc4c96b0170b26c7e9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 23:49:02 +0100 Subject: mac80211: optimise roaming time again The last fixes re-added the RCU synchronize penalty on roaming to fix the races. Split up sta_info_flush() now to get rid of that again, and let managed mode (and only it) delay the actual destruction. Tested-by: Ben Greear Signed-off-by: Johannes Berg --- net/mac80211/iface.c | 15 ++++++++++----- net/mac80211/mlme.c | 2 +- net/mac80211/sta_info.c | 27 +++++++++++++++++---------- net/mac80211/sta_info.h | 20 +++++++++++++++++++- 4 files changed, 47 insertions(+), 17 deletions(-) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 604b4aae3364..12341efb109e 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -775,8 +775,10 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, * This is relevant only in WDS mode, in all other modes we've * already removed all stations when disconnecting or similar, * so warn otherwise. + * + * We call sta_info_flush_cleanup() later, to combine RCU waits. */ - flushed = sta_info_flush(sdata); + flushed = sta_info_flush_defer(sdata); WARN_ON_ONCE((sdata->vif.type != NL80211_IFTYPE_WDS && flushed > 0) || (sdata->vif.type == NL80211_IFTYPE_WDS && flushed != 1)); @@ -861,11 +863,14 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, cancel_work_sync(&sdata->work); /* * When we get here, the interface is marked down. - * Call synchronize_rcu() to wait for the RX path - * should it be using the interface and enqueuing - * frames at this very time on another CPU. + * sta_info_flush_cleanup() calls rcu_barrier to + * wait for the station call_rcu() calls to complete, + * here we require it to wait for the RX path in case + * it is using the interface and enqueuing frames at + * this very time on another CPU. */ - synchronize_rcu(); + sta_info_flush_cleanup(sdata); + skb_queue_purge(&sdata->skb_queue); /* diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 6d61d2f88716..3cf85d8629a7 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1521,7 +1521,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, memset(ifmgd->bssid, 0, ETH_ALEN); /* remove AP and TDLS peers */ - sta_info_flush(sdata); + sta_info_flush_defer(sdata); /* finally reset all BSS / config parameters */ changed |= ieee80211_reset_erp_info(sdata); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index d743645a17b5..7199b9d5b2f4 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -104,6 +104,16 @@ static void cleanup_single_sta(struct sta_info *sta) * neither mac80211 nor the driver can reference this * sta struct any more except by still existing timers * associated with this station that we clean up below. + * + * Note though that this still uses the sdata and even + * calls the driver in AP and mesh mode, so interfaces + * of those types mush use call sta_info_flush_cleanup() + * (typically via sta_info_flush()) before deconfiguring + * the driver. + * + * In station mode, nothing happens here so it doesn't + * have to (and doesn't) do that, this is intentional to + * speed up roaming. */ if (test_sta_flag(sta, WLAN_STA_PS_STA)) { @@ -887,14 +897,8 @@ void sta_info_stop(struct ieee80211_local *local) del_timer_sync(&local->sta_cleanup); } -/** - * sta_info_flush - flush matching STA entries from the STA table - * - * Returns the number of removed STA entries. - * - * @sdata: sdata to remove all stations from - */ -int sta_info_flush(struct ieee80211_sub_if_data *sdata) + +int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct sta_info *sta, *tmp; @@ -911,12 +915,15 @@ int sta_info_flush(struct ieee80211_sub_if_data *sdata) } mutex_unlock(&local->sta_mtx); + return ret; +} + +void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata) +{ rcu_barrier(); ieee80211_cleanup_sdata_stas(sdata); cancel_work_sync(&sdata->cleanup_stations_wk); - - return ret; } void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 13698dae6a88..c3266aed4a07 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -548,7 +548,25 @@ void sta_info_recalc_tim(struct sta_info *sta); void sta_info_init(struct ieee80211_local *local); void sta_info_stop(struct ieee80211_local *local); -int sta_info_flush(struct ieee80211_sub_if_data *sdata); +int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata); +void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata); + +/** + * sta_info_flush - flush matching STA entries from the STA table + * + * Returns the number of removed STA entries. + * + * @sdata: sdata to remove all stations from + */ +static inline int sta_info_flush(struct ieee80211_sub_if_data *sdata) +{ + int ret = sta_info_flush_defer(sdata); + + sta_info_flush_cleanup(sdata); + + return ret; +} + void sta_set_rate_info_tx(struct sta_info *sta, const struct ieee80211_tx_rate *rate, struct rate_info *rinfo); -- cgit v1.2.3 From 10ff57f98d5fccb9bb508ba30230e5df030d67e3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 15 Dec 2012 09:45:50 +0100 Subject: mac80211: remove a bit of dead mesh code In a file that's only built when CONFIG_MAC80211_MESH is defined, having an #ifdef on the same is entirely pointless, so remove it. Signed-off-by: Johannes Berg --- net/mac80211/mesh.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 8a9d5d03bbc2..c0008d5dff0a 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -20,16 +20,11 @@ int mesh_allocated; static struct kmem_cache *rm_cache; -#ifdef CONFIG_MAC80211_MESH bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) { return (mgmt->u.action.u.mesh_action.action_code == WLAN_MESH_ACTION_HWMP_PATH_SELECTION); } -#else -bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt) -{ return false; } -#endif void ieee80211s_init(void) { -- cgit v1.2.3 From 8a57fff0c178febbe28669a0ef68a8e3460a7589 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 17:03:17 +0100 Subject: regulatory: don't write past array when intersecting rules When intersecting rules, we count first to know how many rules need to be allocated, and then do the intersection into the allocated array. However, the code doing this writes past the end of the array because it attempts to do all intersections. Make it stop when the right number of rules has been reached. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 6e5308998e30..40646e823d5d 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -647,9 +647,9 @@ static struct ieee80211_regdomain *regdom_intersect( if (!rd) return NULL; - for (x = 0; x < rd1->n_reg_rules; x++) { + for (x = 0; x < rd1->n_reg_rules && rule_idx < num_rules; x++) { rule1 = &rd1->reg_rules[x]; - for (y = 0; y < rd2->n_reg_rules; y++) { + for (y = 0; y < rd2->n_reg_rules && rule_idx < num_rules; y++) { rule2 = &rd2->reg_rules[y]; /* * This time around instead of using the stack lets -- cgit v1.2.3 From 82f20856304319d5a931846e0269eb911d52a905 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 12:49:16 +0100 Subject: regulatory: don't allocate too much memory There's no need to allocate one reg rule more than will be used, reduce the allocations. The allocation in nl80211 already doesn't allocate too much space. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 40646e823d5d..62bf212e5648 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -318,8 +318,9 @@ static int reg_copy_regd(const struct ieee80211_regdomain **dst_regd, int size_of_regd = 0; unsigned int i; - size_of_regd = sizeof(struct ieee80211_regdomain) + - ((src_regd->n_reg_rules + 1) * sizeof(struct ieee80211_reg_rule)); + size_of_regd = + sizeof(struct ieee80211_regdomain) + + src_regd->n_reg_rules * sizeof(struct ieee80211_reg_rule); regd = kzalloc(size_of_regd, GFP_KERNEL); if (!regd) @@ -641,7 +642,7 @@ static struct ieee80211_regdomain *regdom_intersect( return NULL; size_of_regd = sizeof(struct ieee80211_regdomain) + - ((num_rules + 1) * sizeof(struct ieee80211_reg_rule)); + num_rules * sizeof(struct ieee80211_reg_rule); rd = kzalloc(size_of_regd, GFP_KERNEL); if (!rd) -- cgit v1.2.3 From 74f53cd8d4474f9ba91c7309feabebae80a60089 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 17:26:17 +0100 Subject: regulatory: clean up regdom_intersect As the dummy_rule (also renamed from irule) is only used for output by the reg_rules_intersect() function there's no need to clear it at all, remove that. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 62bf212e5648..d52ffa2abc3f 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -608,12 +608,7 @@ static struct ieee80211_regdomain *regdom_intersect( struct ieee80211_reg_rule *intersected_rule; struct ieee80211_regdomain *rd; /* This is just a dummy holder to help us count */ - struct ieee80211_reg_rule irule; - - /* Uses the stack temporarily for counter arithmetic */ - intersected_rule = &irule; - - memset(intersected_rule, 0, sizeof(struct ieee80211_reg_rule)); + struct ieee80211_reg_rule dummy_rule; if (!rd1 || !rd2) return NULL; @@ -630,11 +625,8 @@ static struct ieee80211_regdomain *regdom_intersect( rule1 = &rd1->reg_rules[x]; for (y = 0; y < rd2->n_reg_rules; y++) { rule2 = &rd2->reg_rules[y]; - if (!reg_rules_intersect(rule1, rule2, - intersected_rule)) + if (!reg_rules_intersect(rule1, rule2, &dummy_rule)) num_rules++; - memset(intersected_rule, 0, - sizeof(struct ieee80211_reg_rule)); } } -- cgit v1.2.3 From e9763c3c295a8b31316e16558b58b226e005b160 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 16:59:46 +0100 Subject: regulatory: clean up reg_copy_regd() Use ERR_PTR/IS_ERR to return the result or errors, also do some code cleanups. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 50 ++++++++++++++++++++++++-------------------------- 1 file changed, 24 insertions(+), 26 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index d52ffa2abc3f..52a3598859cd 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -311,11 +311,11 @@ static bool is_user_regdom_saved(void) return true; } -static int reg_copy_regd(const struct ieee80211_regdomain **dst_regd, - const struct ieee80211_regdomain *src_regd) +static const struct ieee80211_regdomain * +reg_copy_regd(const struct ieee80211_regdomain *src_regd) { struct ieee80211_regdomain *regd; - int size_of_regd = 0; + int size_of_regd; unsigned int i; size_of_regd = @@ -324,16 +324,15 @@ static int reg_copy_regd(const struct ieee80211_regdomain **dst_regd, regd = kzalloc(size_of_regd, GFP_KERNEL); if (!regd) - return -ENOMEM; + return ERR_PTR(-ENOMEM); memcpy(regd, src_regd, sizeof(struct ieee80211_regdomain)); for (i = 0; i < src_regd->n_reg_rules; i++) memcpy(®d->reg_rules[i], &src_regd->reg_rules[i], - sizeof(struct ieee80211_reg_rule)); + sizeof(struct ieee80211_reg_rule)); - *dst_regd = regd; - return 0; + return regd; } #ifdef CONFIG_CFG80211_INTERNAL_REGDB @@ -348,9 +347,8 @@ static DEFINE_MUTEX(reg_regdb_search_mutex); static void reg_regdb_search(struct work_struct *work) { struct reg_regdb_search_request *request; - const struct ieee80211_regdomain *curdom, *regdom; - int i, r; - bool set_reg = false; + const struct ieee80211_regdomain *curdom, *regdom = NULL; + int i; mutex_lock(&cfg80211_mutex); @@ -365,10 +363,7 @@ static void reg_regdb_search(struct work_struct *work) curdom = reg_regdb[i]; if (!memcmp(request->alpha2, curdom->alpha2, 2)) { - r = reg_copy_regd(®dom, curdom); - if (r) - break; - set_reg = true; + regdom = reg_copy_regd(curdom); break; } } @@ -377,7 +372,7 @@ static void reg_regdb_search(struct work_struct *work) } mutex_unlock(®_regdb_search_mutex); - if (set_reg) + if (!IS_ERR_OR_NULL(regdom)) set_regdom(regdom); mutex_unlock(&cfg80211_mutex); @@ -1509,6 +1504,7 @@ static void reg_set_request_processed(void) static int __regulatory_hint(struct wiphy *wiphy, struct regulatory_request *pending_request) { + const struct ieee80211_regdomain *regd; bool intersect = false; int r = 0; @@ -1519,11 +1515,12 @@ static int __regulatory_hint(struct wiphy *wiphy, if (r == REG_INTERSECT) { if (pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { - r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain); - if (r) { + regd = reg_copy_regd(cfg80211_regdomain); + if (IS_ERR(regd)) { kfree(pending_request); - return r; + return PTR_ERR(regd); } + wiphy->regd = regd; } intersect = true; } else if (r) { @@ -1535,12 +1532,13 @@ static int __regulatory_hint(struct wiphy *wiphy, if (r == -EALREADY && pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { - r = reg_copy_regd(&wiphy->regd, cfg80211_regdomain); - if (r) { + regd = reg_copy_regd(cfg80211_regdomain); + if (IS_ERR(regd)) { kfree(pending_request); - return r; + return PTR_ERR(regd); } r = -EALREADY; + wiphy->regd = regd; goto new_request; } kfree(pending_request); @@ -2200,6 +2198,7 @@ static void print_regdomain_info(const struct ieee80211_regdomain *rd) /* Takes ownership of rd only if it doesn't fail */ static int __set_regdom(const struct ieee80211_regdomain *rd) { + const struct ieee80211_regdomain *regd; const struct ieee80211_regdomain *intersected_rd = NULL; struct wiphy *request_wiphy; /* Some basic sanity checks first */ @@ -2257,8 +2256,6 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) } if (!last_request->intersect) { - int r; - if (last_request->initiator != NL80211_REGDOM_SET_BY_DRIVER) { reset_regdomains(false); cfg80211_regdomain = rd; @@ -2277,10 +2274,11 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (request_wiphy->regd) return -EALREADY; - r = reg_copy_regd(&request_wiphy->regd, rd); - if (r) - return r; + regd = reg_copy_regd(rd); + if (IS_ERR(regd)) + return PTR_ERR(regd); + request_wiphy->regd = regd; reset_regdomains(false); cfg80211_regdomain = rd; return 0; -- cgit v1.2.3 From fea9bcedce2d0c751d4f31155f4634689d46166e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 17:32:01 +0100 Subject: regulatory: don't test list before iterating There's no need to test whether a list is empty or not before iterating. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 66 ++++++++++++++++-------------------------------------- 1 file changed, 19 insertions(+), 47 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 52a3598859cd..1496a10da638 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1104,9 +1104,6 @@ static void wiphy_update_beacon_reg(struct wiphy *wiphy) assert_cfg80211_lock(); - if (list_empty(®_beacon_list)) - return; - list_for_each_entry(reg_beacon, ®_beacon_list, list) { if (!wiphy->bands[reg_beacon->chan.band]) continue; @@ -1666,11 +1663,6 @@ static void reg_process_pending_beacon_hints(void) /* This goes through the _pending_ beacon list */ spin_lock_bh(®_pending_beacons_lock); - if (list_empty(®_pending_beacons)) { - spin_unlock_bh(®_pending_beacons_lock); - goto out; - } - list_for_each_entry_safe(pending_beacon, tmp, ®_pending_beacons, list) { @@ -1685,7 +1677,6 @@ static void reg_process_pending_beacon_hints(void) } spin_unlock_bh(®_pending_beacons_lock); -out: mutex_unlock(&cfg80211_mutex); } @@ -1949,34 +1940,24 @@ static void restore_regulatory_settings(bool reset_user) * settings. */ spin_lock(®_requests_lock); - if (!list_empty(®_requests_list)) { - list_for_each_entry_safe(reg_request, tmp, - ®_requests_list, list) { - if (reg_request->initiator != - NL80211_REGDOM_SET_BY_USER) - continue; - list_move_tail(®_request->list, &tmp_reg_req_list); - } + list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) { + if (reg_request->initiator != NL80211_REGDOM_SET_BY_USER) + continue; + list_move_tail(®_request->list, &tmp_reg_req_list); } spin_unlock(®_requests_lock); /* Clear beacon hints */ spin_lock_bh(®_pending_beacons_lock); - if (!list_empty(®_pending_beacons)) { - list_for_each_entry_safe(reg_beacon, btmp, - ®_pending_beacons, list) { - list_del(®_beacon->list); - kfree(reg_beacon); - } + list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { + list_del(®_beacon->list); + kfree(reg_beacon); } spin_unlock_bh(®_pending_beacons_lock); - if (!list_empty(®_beacon_list)) { - list_for_each_entry_safe(reg_beacon, btmp, - ®_beacon_list, list) { - list_del(®_beacon->list); - kfree(reg_beacon); - } + list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { + list_del(®_beacon->list); + kfree(reg_beacon); } /* First restore to the basic regulatory settings */ @@ -2490,30 +2471,21 @@ void /* __init_or_exit */ regulatory_exit(void) platform_device_unregister(reg_pdev); spin_lock_bh(®_pending_beacons_lock); - if (!list_empty(®_pending_beacons)) { - list_for_each_entry_safe(reg_beacon, btmp, - ®_pending_beacons, list) { - list_del(®_beacon->list); - kfree(reg_beacon); - } + list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { + list_del(®_beacon->list); + kfree(reg_beacon); } spin_unlock_bh(®_pending_beacons_lock); - if (!list_empty(®_beacon_list)) { - list_for_each_entry_safe(reg_beacon, btmp, - ®_beacon_list, list) { - list_del(®_beacon->list); - kfree(reg_beacon); - } + list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { + list_del(®_beacon->list); + kfree(reg_beacon); } spin_lock(®_requests_lock); - if (!list_empty(®_requests_list)) { - list_for_each_entry_safe(reg_request, tmp, - ®_requests_list, list) { - list_del(®_request->list); - kfree(reg_request); - } + list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) { + list_del(®_request->list); + kfree(reg_request); } spin_unlock(®_requests_lock); -- cgit v1.2.3 From 75e2dba866706ab9b133983b7fd9a6297b24c22d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 17:21:26 +0100 Subject: regulatory: simplify regulatory_hint_11d There's no need to unlock before calling queue_regulatory_request(), so simplify the function. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 1496a10da638..cd99d285e8d8 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1825,12 +1825,7 @@ void regulatory_hint_11d(struct wiphy *wiphy, request->initiator = NL80211_REGDOM_SET_BY_COUNTRY_IE; request->country_ie_env = env; - mutex_unlock(®_mutex); - queue_regulatory_request(request); - - return; - out: mutex_unlock(®_mutex); } -- cgit v1.2.3 From 1a9193185f462a51815fe48491f8a6fb6b942551 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 17:21:11 +0100 Subject: regulatory: code cleanup Clean up various things like indentation, extra parentheses, too many/few line breaks, etc. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 15 ++- net/wireless/reg.c | 286 ++++++++++++++++++------------------------------- net/wireless/reg.h | 4 +- net/wireless/sme.c | 6 +- 4 files changed, 116 insertions(+), 195 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index f45706adaf34..a19583cf4b6e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4259,7 +4259,7 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) dfs_region = nla_get_u8(info->attrs[NL80211_ATTR_DFS_REGION]); nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES], - rem_reg_rules) { + rem_reg_rules) { num_rules++; if (num_rules > NL80211_MAX_SUPP_REG_RULES) return -EINVAL; @@ -4273,7 +4273,7 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) } size_of_regd = sizeof(struct ieee80211_regdomain) + - (num_rules * sizeof(struct ieee80211_reg_rule)); + num_rules * sizeof(struct ieee80211_reg_rule); rd = kzalloc(size_of_regd, GFP_KERNEL); if (!rd) { @@ -4293,10 +4293,10 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) rd->dfs_region = dfs_region; nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES], - rem_reg_rules) { + rem_reg_rules) { nla_parse(tb, NL80211_REG_RULE_ATTR_MAX, - nla_data(nl_reg_rule), nla_len(nl_reg_rule), - reg_rule_policy); + nla_data(nl_reg_rule), nla_len(nl_reg_rule), + reg_rule_policy); r = parse_reg_rule(tb, &rd->reg_rules[rule_idx]); if (r) goto bad_reg; @@ -4312,10 +4312,7 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) BUG_ON(rule_idx != num_rules); r = set_regdom(rd); - - mutex_unlock(&cfg80211_mutex); - - return r; + rd = NULL; bad_reg: mutex_unlock(&cfg80211_mutex); diff --git a/net/wireless/reg.c b/net/wireless/reg.c index cd99d285e8d8..cf2fb3425a63 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -48,7 +48,6 @@ #include #include #include -#include #include #include #include @@ -219,18 +218,14 @@ bool is_world_regdom(const char *alpha2) { if (!alpha2) return false; - if (alpha2[0] == '0' && alpha2[1] == '0') - return true; - return false; + return alpha2[0] == '0' && alpha2[1] == '0'; } static bool is_alpha2_set(const char *alpha2) { if (!alpha2) return false; - if (alpha2[0] != 0 && alpha2[1] != 0) - return true; - return false; + return alpha2[0] && alpha2[1]; } static bool is_unknown_alpha2(const char *alpha2) @@ -241,9 +236,7 @@ static bool is_unknown_alpha2(const char *alpha2) * Special case where regulatory domain was built by driver * but a specific alpha2 cannot be determined */ - if (alpha2[0] == '9' && alpha2[1] == '9') - return true; - return false; + return alpha2[0] == '9' && alpha2[1] == '9'; } static bool is_intersected_alpha2(const char *alpha2) @@ -255,28 +248,21 @@ static bool is_intersected_alpha2(const char *alpha2) * result of an intersection between two regulatory domain * structures */ - if (alpha2[0] == '9' && alpha2[1] == '8') - return true; - return false; + return alpha2[0] == '9' && alpha2[1] == '8'; } static bool is_an_alpha2(const char *alpha2) { if (!alpha2) return false; - if (isalpha(alpha2[0]) && isalpha(alpha2[1])) - return true; - return false; + return isalpha(alpha2[0]) && isalpha(alpha2[1]); } static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y) { if (!alpha2_x || !alpha2_y) return false; - if (alpha2_x[0] == alpha2_y[0] && - alpha2_x[1] == alpha2_y[1]) - return true; - return false; + return alpha2_x[0] == alpha2_y[0] && alpha2_x[1] == alpha2_y[1]; } static bool regdom_changes(const char *alpha2) @@ -285,9 +271,7 @@ static bool regdom_changes(const char *alpha2) if (!cfg80211_regdomain) return true; - if (alpha2_equal(cfg80211_regdomain->alpha2, alpha2)) - return false; - return true; + return !alpha2_equal(cfg80211_regdomain->alpha2, alpha2); } /* @@ -301,11 +285,9 @@ static bool is_user_regdom_saved(void) return false; /* This would indicate a mistake on the design */ - if (WARN((!is_world_regdom(user_alpha2) && - !is_an_alpha2(user_alpha2)), + if (WARN(!is_world_regdom(user_alpha2) && !is_an_alpha2(user_alpha2), "Unexpected user alpha2: %c%c\n", - user_alpha2[0], - user_alpha2[1])) + user_alpha2[0], user_alpha2[1])) return false; return true; @@ -359,10 +341,10 @@ static void reg_regdb_search(struct work_struct *work) list); list_del(&request->list); - for (i=0; ialpha2, curdom->alpha2, 2)) { + if (alpha2_equal(request->alpha2, curdom->alpha2)) { regdom = reg_copy_regd(curdom); break; } @@ -456,7 +438,7 @@ static bool is_valid_reg_rule(const struct ieee80211_reg_rule *rule) freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; if (freq_range->end_freq_khz <= freq_range->start_freq_khz || - freq_range->max_bandwidth_khz > freq_diff) + freq_range->max_bandwidth_khz > freq_diff) return false; return true; @@ -514,7 +496,7 @@ static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range, * regulatory rule support for other "bands". **/ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, - u32 freq_khz) + u32 freq_khz) { #define ONE_GHZ_IN_KHZ 1000000 /* @@ -536,10 +518,9 @@ static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, * Helper for regdom_intersect(), this does the real * mathematical intersection fun */ -static int reg_rules_intersect( - const struct ieee80211_reg_rule *rule1, - const struct ieee80211_reg_rule *rule2, - struct ieee80211_reg_rule *intersected_rule) +static int reg_rules_intersect(const struct ieee80211_reg_rule *rule1, + const struct ieee80211_reg_rule *rule2, + struct ieee80211_reg_rule *intersected_rule) { const struct ieee80211_freq_range *freq_range1, *freq_range2; struct ieee80211_freq_range *freq_range; @@ -556,11 +537,11 @@ static int reg_rules_intersect( power_rule = &intersected_rule->power_rule; freq_range->start_freq_khz = max(freq_range1->start_freq_khz, - freq_range2->start_freq_khz); + freq_range2->start_freq_khz); freq_range->end_freq_khz = min(freq_range1->end_freq_khz, - freq_range2->end_freq_khz); + freq_range2->end_freq_khz); freq_range->max_bandwidth_khz = min(freq_range1->max_bandwidth_khz, - freq_range2->max_bandwidth_khz); + freq_range2->max_bandwidth_khz); freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz; if (freq_range->max_bandwidth_khz > freq_diff) @@ -571,7 +552,7 @@ static int reg_rules_intersect( power_rule->max_antenna_gain = min(power_rule1->max_antenna_gain, power_rule2->max_antenna_gain); - intersected_rule->flags = (rule1->flags | rule2->flags); + intersected_rule->flags = rule1->flags | rule2->flags; if (!is_valid_reg_rule(intersected_rule)) return -EINVAL; @@ -592,9 +573,9 @@ static int reg_rules_intersect( * resulting intersection of rules between rd1 and rd2. We will * kzalloc() this structure for you. */ -static struct ieee80211_regdomain *regdom_intersect( - const struct ieee80211_regdomain *rd1, - const struct ieee80211_regdomain *rd2) +static struct ieee80211_regdomain * +regdom_intersect(const struct ieee80211_regdomain *rd1, + const struct ieee80211_regdomain *rd2) { int r, size_of_regd; unsigned int x, y; @@ -645,8 +626,7 @@ static struct ieee80211_regdomain *regdom_intersect( * a memcpy() */ intersected_rule = &rd->reg_rules[rule_idx]; - r = reg_rules_intersect(rule1, rule2, - intersected_rule); + r = reg_rules_intersect(rule1, rule2, intersected_rule); /* * No need to memset here the intersected rule here as * we're not using the stack anymore @@ -731,9 +711,7 @@ static int freq_reg_info_regd(struct wiphy *wiphy, if (!band_rule_found) band_rule_found = freq_in_rule_band(fr, center_freq); - bw_fits = reg_does_bw_fit(fr, - center_freq, - desired_bw_khz); + bw_fits = reg_does_bw_fit(fr, center_freq, desired_bw_khz); if (band_rule_found && bw_fits) { *reg_rule = rr; @@ -747,17 +725,13 @@ static int freq_reg_info_regd(struct wiphy *wiphy, return -EINVAL; } -int freq_reg_info(struct wiphy *wiphy, - u32 center_freq, - u32 desired_bw_khz, +int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 desired_bw_khz, const struct ieee80211_reg_rule **reg_rule) { assert_cfg80211_lock(); - return freq_reg_info_regd(wiphy, - center_freq, - desired_bw_khz, - reg_rule, - NULL); + + return freq_reg_info_regd(wiphy, center_freq, desired_bw_khz, + reg_rule, NULL); } EXPORT_SYMBOL(freq_reg_info); @@ -795,16 +769,12 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, else snprintf(max_antenna_gain, 32, "%d", power_rule->max_antenna_gain); - REG_DBG_PRINT("Updating information on frequency %d MHz " - "for a %d MHz width channel with regulatory rule:\n", - chan->center_freq, - KHZ_TO_MHZ(desired_bw_khz)); + REG_DBG_PRINT("Updating information on frequency %d MHz for a %d MHz width channel with regulatory rule:\n", + chan->center_freq, KHZ_TO_MHZ(desired_bw_khz)); REG_DBG_PRINT("%d KHz - %d KHz @ %d KHz), (%s mBi, %d mBm)\n", - freq_range->start_freq_khz, - freq_range->end_freq_khz, - freq_range->max_bandwidth_khz, - max_antenna_gain, + freq_range->start_freq_khz, freq_range->end_freq_khz, + freq_range->max_bandwidth_khz, max_antenna_gain, power_rule->max_eirp); } #else @@ -850,11 +820,8 @@ static void handle_channel(struct wiphy *wiphy, flags = chan->orig_flags; - r = freq_reg_info(wiphy, - MHZ_TO_KHZ(chan->center_freq), - desired_bw_khz, - ®_rule); - + r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), + desired_bw_khz, ®_rule); if (r) { /* * We will disable all channels that do not match our @@ -902,8 +869,9 @@ static void handle_channel(struct wiphy *wiphy, chan->beacon_found = false; chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); - chan->max_antenna_gain = min(chan->orig_mag, - (int) MBI_TO_DBI(power_rule->max_antenna_gain)); + chan->max_antenna_gain = + min_t(int, chan->orig_mag, + MBI_TO_DBI(power_rule->max_antenna_gain)); chan->max_reg_power = (int) MBM_TO_DBM(power_rule->max_eirp); if (chan->orig_mpwr) { /* @@ -922,8 +890,7 @@ static void handle_channel(struct wiphy *wiphy, chan->max_power = chan->max_reg_power; } -static void handle_band(struct wiphy *wiphy, - enum ieee80211_band band, +static void handle_band(struct wiphy *wiphy, enum ieee80211_band band, enum nl80211_reg_initiator initiator) { unsigned int i; @@ -940,51 +907,48 @@ static bool reg_request_cell_base(struct regulatory_request *request) { if (request->initiator != NL80211_REGDOM_SET_BY_USER) return false; - if (request->user_reg_hint_type != NL80211_USER_REG_HINT_CELL_BASE) - return false; - return true; + return request->user_reg_hint_type == NL80211_USER_REG_HINT_CELL_BASE; } bool reg_last_request_cell_base(void) { bool val; + assert_cfg80211_lock(); mutex_lock(®_mutex); val = reg_request_cell_base(last_request); mutex_unlock(®_mutex); + return val; } #ifdef CONFIG_CFG80211_CERTIFICATION_ONUS - /* Core specific check */ static int reg_ignore_cell_hint(struct regulatory_request *pending_request) { if (!reg_num_devs_support_basehint) return -EOPNOTSUPP; - if (reg_request_cell_base(last_request)) { - if (!regdom_changes(pending_request->alpha2)) - return -EALREADY; - return 0; - } + if (reg_request_cell_base(last_request) && + !regdom_changes(pending_request->alpha2)) + return -EALREADY; + return 0; } /* Device specific check */ static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) { - if (!(wiphy->features & NL80211_FEATURE_CELL_BASE_REG_HINTS)) - return true; - return false; + return !(wiphy->features & NL80211_FEATURE_CELL_BASE_REG_HINTS); } #else static int reg_ignore_cell_hint(struct regulatory_request *pending_request) { return -EOPNOTSUPP; } -static int reg_dev_ignore_cell_hint(struct wiphy *wiphy) + +static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) { return true; } @@ -995,17 +959,14 @@ static bool ignore_reg_update(struct wiphy *wiphy, enum nl80211_reg_initiator initiator) { if (!last_request) { - REG_DBG_PRINT("Ignoring regulatory request %s since " - "last_request is not set\n", + REG_DBG_PRINT("Ignoring regulatory request %s since last_request is not set\n", reg_initiator_name(initiator)); return true; } if (initiator == NL80211_REGDOM_SET_BY_CORE && wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) { - REG_DBG_PRINT("Ignoring regulatory request %s " - "since the driver uses its own custom " - "regulatory domain\n", + REG_DBG_PRINT("Ignoring regulatory request %s since the driver uses its own custom regulatory domain\n", reg_initiator_name(initiator)); return true; } @@ -1017,9 +978,7 @@ static bool ignore_reg_update(struct wiphy *wiphy, if (wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY && !wiphy->regd && initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && !is_world_regdom(last_request->alpha2)) { - REG_DBG_PRINT("Ignoring regulatory request %s " - "since the driver requires its own regulatory " - "domain to be set first\n", + REG_DBG_PRINT("Ignoring regulatory request %s since the driver requires its own regulatory domain to be set first\n", reg_initiator_name(initiator)); return true; } @@ -1030,8 +989,7 @@ static bool ignore_reg_update(struct wiphy *wiphy, return false; } -static void handle_reg_beacon(struct wiphy *wiphy, - unsigned int chan_idx, +static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, struct reg_beacon *reg_beacon) { struct ieee80211_supported_band *sband; @@ -1139,16 +1097,14 @@ static void reg_process_beacons(struct wiphy *wiphy) wiphy_update_beacon_reg(wiphy); } -static bool is_ht40_not_allowed(struct ieee80211_channel *chan) +static bool is_ht40_allowed(struct ieee80211_channel *chan) { if (!chan) - return true; + return false; if (chan->flags & IEEE80211_CHAN_DISABLED) - return true; + return false; /* This would happen when regulatory rules disallow HT40 completely */ - if (IEEE80211_CHAN_NO_HT40 == (chan->flags & (IEEE80211_CHAN_NO_HT40))) - return true; - return false; + return !(chan->flags & IEEE80211_CHAN_NO_HT40); } static void reg_process_ht_flags_channel(struct wiphy *wiphy, @@ -1166,7 +1122,7 @@ static void reg_process_ht_flags_channel(struct wiphy *wiphy, BUG_ON(chan_idx >= sband->n_channels); channel = &sband->channels[chan_idx]; - if (is_ht40_not_allowed(channel)) { + if (!is_ht40_allowed(channel)) { channel->flags |= IEEE80211_CHAN_NO_HT40; return; } @@ -1177,6 +1133,7 @@ static void reg_process_ht_flags_channel(struct wiphy *wiphy, */ for (i = 0; i < sband->n_channels; i++) { struct ieee80211_channel *c = &sband->channels[i]; + if (c->center_freq == (channel->center_freq - 20)) channel_before = c; if (c->center_freq == (channel->center_freq + 20)) @@ -1188,12 +1145,12 @@ static void reg_process_ht_flags_channel(struct wiphy *wiphy, * if that ever changes we also need to change the below logic * to include that as well. */ - if (is_ht40_not_allowed(channel_before)) + if (!is_ht40_allowed(channel_before)) channel->flags |= IEEE80211_CHAN_NO_HT40MINUS; else channel->flags &= ~IEEE80211_CHAN_NO_HT40MINUS; - if (is_ht40_not_allowed(channel_after)) + if (!is_ht40_allowed(channel_after)) channel->flags |= IEEE80211_CHAN_NO_HT40PLUS; else channel->flags &= ~IEEE80211_CHAN_NO_HT40PLUS; @@ -1245,6 +1202,7 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, reg_process_beacons(wiphy); reg_process_ht_flags(wiphy); + if (wiphy->reg_notifier) wiphy->reg_notifier(wiphy, last_request); } @@ -1289,18 +1247,12 @@ static void handle_channel_custom(struct wiphy *wiphy, BUG_ON(chan_idx >= sband->n_channels); chan = &sband->channels[chan_idx]; - r = freq_reg_info_regd(wiphy, - MHZ_TO_KHZ(chan->center_freq), - desired_bw_khz, - ®_rule, - regd); + r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), + desired_bw_khz, ®_rule, regd); if (r) { - REG_DBG_PRINT("Disabling freq %d MHz as custom " - "regd has no rule that fits a %d MHz " - "wide channel\n", - chan->center_freq, - KHZ_TO_MHZ(desired_bw_khz)); + REG_DBG_PRINT("Disabling freq %d MHz as custom regd has no rule that fits a %d MHz wide channel\n", + chan->center_freq, KHZ_TO_MHZ(desired_bw_khz)); chan->flags = IEEE80211_CHAN_DISABLED; return; } @@ -1350,7 +1302,7 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, /* * no point in calling this if it won't have any effect - * on your device's supportd bands. + * on your device's supported bands. */ WARN_ON(!bands_set); } @@ -1379,7 +1331,6 @@ static int ignore_request(struct wiphy *wiphy, case NL80211_REGDOM_SET_BY_CORE: return 0; case NL80211_REGDOM_SET_BY_COUNTRY_IE: - if (reg_request_cell_base(last_request)) { /* Trust a Cell base station over the AP's country IE */ if (regdom_changes(pending_request->alpha2)) @@ -1444,18 +1395,17 @@ static int ignore_request(struct wiphy *wiphy, * to their country before the IE is picked up */ if (last_request->initiator == NL80211_REGDOM_SET_BY_USER && - last_request->intersect) + last_request->intersect) return -EOPNOTSUPP; /* * Process user requests only after previous user/driver/core * requests have been processed */ - if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE || - last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || - last_request->initiator == NL80211_REGDOM_SET_BY_USER) { - if (regdom_changes(last_request->alpha2)) - return -EAGAIN; - } + if ((last_request->initiator == NL80211_REGDOM_SET_BY_CORE || + last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || + last_request->initiator == NL80211_REGDOM_SET_BY_USER) && + regdom_changes(last_request->alpha2)) + return -EAGAIN; if (!regdom_changes(pending_request->alpha2)) return -EALREADY; @@ -1585,8 +1535,7 @@ static void reg_process_hint(struct regulatory_request *reg_request, if (wiphy_idx_valid(reg_request->wiphy_idx)) wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); - if (reg_initiator == NL80211_REGDOM_SET_BY_DRIVER && - !wiphy) { + if (reg_initiator == NL80211_REGDOM_SET_BY_DRIVER && !wiphy) { kfree(reg_request); return; } @@ -1603,8 +1552,7 @@ static void reg_process_hint(struct regulatory_request *reg_request, * We only time out user hints, given that they should be the only * source of bogus requests. */ - if (r != -EALREADY && - reg_initiator == NL80211_REGDOM_SET_BY_USER) + if (r != -EALREADY && reg_initiator == NL80211_REGDOM_SET_BY_USER) schedule_delayed_work(®_timeout, msecs_to_jiffies(3142)); } @@ -1622,8 +1570,7 @@ static void reg_process_pending_hints(void) /* When last_request->processed becomes true this will be rescheduled */ if (last_request && !last_request->processed) { - REG_DBG_PRINT("Pending regulatory request, waiting " - "for it to be processed...\n"); + REG_DBG_PRINT("Pending regulatory request, waiting for it to be processed...\n"); goto out; } @@ -1665,7 +1612,6 @@ static void reg_process_pending_beacon_hints(void) list_for_each_entry_safe(pending_beacon, tmp, ®_pending_beacons, list) { - list_del_init(&pending_beacon->list); /* Applies the beacon hint to current wiphys */ @@ -1708,8 +1654,7 @@ static int regulatory_hint_core(const char *alpha2) { struct regulatory_request *request; - request = kzalloc(sizeof(struct regulatory_request), - GFP_KERNEL); + request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); if (!request) return -ENOMEM; @@ -1776,10 +1721,8 @@ EXPORT_SYMBOL(regulatory_hint); * We hold wdev_lock() here so we cannot hold cfg80211_mutex() and * therefore cannot iterate over the rdev list here. */ -void regulatory_hint_11d(struct wiphy *wiphy, - enum ieee80211_band band, - const u8 *country_ie, - u8 country_ie_len) +void regulatory_hint_11d(struct wiphy *wiphy, enum ieee80211_band band, + const u8 *country_ie, u8 country_ie_len) { char alpha2[2]; enum environment_cap env = ENVIRON_ANY; @@ -1811,8 +1754,8 @@ void regulatory_hint_11d(struct wiphy *wiphy, * cfg80211_mutex. */ if (likely(last_request->initiator == - NL80211_REGDOM_SET_BY_COUNTRY_IE && - wiphy_idx_valid(last_request->wiphy_idx))) + NL80211_REGDOM_SET_BY_COUNTRY_IE && + wiphy_idx_valid(last_request->wiphy_idx))) goto out; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); @@ -1840,8 +1783,7 @@ static void restore_alpha2(char *alpha2, bool reset_user) if (is_user_regdom_saved()) { /* Unless we're asked to ignore it and reset it */ if (reset_user) { - REG_DBG_PRINT("Restoring regulatory settings " - "including user preference\n"); + REG_DBG_PRINT("Restoring regulatory settings including user preference\n"); user_alpha2[0] = '9'; user_alpha2[1] = '7'; @@ -1851,26 +1793,20 @@ static void restore_alpha2(char *alpha2, bool reset_user) * back as they were for a full restore. */ if (!is_world_regdom(ieee80211_regdom)) { - REG_DBG_PRINT("Keeping preference on " - "module parameter ieee80211_regdom: %c%c\n", - ieee80211_regdom[0], - ieee80211_regdom[1]); + REG_DBG_PRINT("Keeping preference on module parameter ieee80211_regdom: %c%c\n", + ieee80211_regdom[0], ieee80211_regdom[1]); alpha2[0] = ieee80211_regdom[0]; alpha2[1] = ieee80211_regdom[1]; } } else { - REG_DBG_PRINT("Restoring regulatory settings " - "while preserving user preference for: %c%c\n", - user_alpha2[0], - user_alpha2[1]); + REG_DBG_PRINT("Restoring regulatory settings while preserving user preference for: %c%c\n", + user_alpha2[0], user_alpha2[1]); alpha2[0] = user_alpha2[0]; alpha2[1] = user_alpha2[1]; } } else if (!is_world_regdom(ieee80211_regdom)) { - REG_DBG_PRINT("Keeping preference on " - "module parameter ieee80211_regdom: %c%c\n", - ieee80211_regdom[0], - ieee80211_regdom[1]); + REG_DBG_PRINT("Keeping preference on module parameter ieee80211_regdom: %c%c\n", + ieee80211_regdom[0], ieee80211_regdom[1]); alpha2[0] = ieee80211_regdom[0]; alpha2[1] = ieee80211_regdom[1]; } else @@ -1986,10 +1922,8 @@ static void restore_regulatory_settings(bool reset_user) spin_lock(®_requests_lock); list_for_each_entry_safe(reg_request, tmp, &tmp_reg_req_list, list) { - REG_DBG_PRINT("Adding request for country %c%c back " - "into the queue\n", - reg_request->alpha2[0], - reg_request->alpha2[1]); + REG_DBG_PRINT("Adding request for country %c%c back into the queue\n", + reg_request->alpha2[0], reg_request->alpha2[1]); list_move_tail(®_request->list, ®_requests_list); } spin_unlock(®_requests_lock); @@ -2004,8 +1938,7 @@ static void restore_regulatory_settings(bool reset_user) void regulatory_hint_disconnect(void) { - REG_DBG_PRINT("All devices are disconnected, going to " - "restore regulatory settings\n"); + REG_DBG_PRINT("All devices are disconnected, going to restore regulatory settings\n"); restore_regulatory_settings(false); } @@ -2024,25 +1957,23 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy, { struct reg_beacon *reg_beacon; - if (likely((beacon_chan->beacon_found || - (beacon_chan->flags & IEEE80211_CHAN_RADAR) || + if (beacon_chan->beacon_found || + beacon_chan->flags & IEEE80211_CHAN_RADAR || (beacon_chan->band == IEEE80211_BAND_2GHZ && - !freq_is_chan_12_13_14(beacon_chan->center_freq))))) + !freq_is_chan_12_13_14(beacon_chan->center_freq))) return 0; reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp); if (!reg_beacon) return -ENOMEM; - REG_DBG_PRINT("Found new beacon on " - "frequency: %d MHz (Ch %d) on %s\n", + REG_DBG_PRINT("Found new beacon on frequency: %d MHz (Ch %d) on %s\n", beacon_chan->center_freq, ieee80211_frequency_to_channel(beacon_chan->center_freq), wiphy_name(wiphy)); memcpy(®_beacon->chan, beacon_chan, - sizeof(struct ieee80211_channel)); - + sizeof(struct ieee80211_channel)); /* * Since we can be called from BH or and non-BH context @@ -2122,7 +2053,7 @@ static void print_dfs_region(u8 dfs_region) pr_info(" DFS Master region JP"); break; default: - pr_info(" DFS Master region Uknown"); + pr_info(" DFS Master region Unknown"); break; } } @@ -2131,7 +2062,6 @@ static void print_regdomain(const struct ieee80211_regdomain *rd) { if (is_intersected_alpha2(rd->alpha2)) { - if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { struct cfg80211_registered_device *rdev; @@ -2145,22 +2075,21 @@ static void print_regdomain(const struct ieee80211_regdomain *rd) pr_info("Current regulatory domain intersected:\n"); } else pr_info("Current regulatory domain intersected:\n"); - } else if (is_world_regdom(rd->alpha2)) + } else if (is_world_regdom(rd->alpha2)) { pr_info("World regulatory domain updated:\n"); - else { + } else { if (is_unknown_alpha2(rd->alpha2)) pr_info("Regulatory domain changed to driver built-in settings (unknown country)\n"); else { if (reg_request_cell_base(last_request)) - pr_info("Regulatory domain changed " - "to country: %c%c by Cell Station\n", + pr_info("Regulatory domain changed to country: %c%c by Cell Station\n", rd->alpha2[0], rd->alpha2[1]); else - pr_info("Regulatory domain changed " - "to country: %c%c\n", + pr_info("Regulatory domain changed to country: %c%c\n", rd->alpha2[0], rd->alpha2[1]); } } + print_dfs_region(rd->dfs_region); print_rd_rules(rd); } @@ -2187,7 +2116,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) } if (!is_alpha2_set(rd->alpha2) && !is_an_alpha2(rd->alpha2) && - !is_unknown_alpha2(rd->alpha2)) + !is_unknown_alpha2(rd->alpha2)) return -EINVAL; if (!last_request) @@ -2263,7 +2192,6 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* Intersection requires a bit more work */ if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { - intersected_rd = regdom_intersect(rd, cfg80211_regdomain); if (!intersected_rd) return -EINVAL; @@ -2315,8 +2243,7 @@ int set_regdom(const struct ieee80211_regdomain *rd) } /* This would make this whole thing pointless */ - if (!last_request->intersect) - BUG_ON(rd != cfg80211_regdomain); + BUG_ON(!last_request->intersect && rd != cfg80211_regdomain); /* update all wiphys now with the new established regulatory domain */ update_all_wiphy_regulatory(last_request->initiator); @@ -2393,8 +2320,7 @@ out: static void reg_timeout_work(struct work_struct *work) { - REG_DBG_PRINT("Timeout while waiting for CRDA to reply, " - "restoring regulatory settings\n"); + REG_DBG_PRINT("Timeout while waiting for CRDA to reply, restoring regulatory settings\n"); restore_regulatory_settings(true); } @@ -2448,7 +2374,7 @@ int __init regulatory_init(void) return 0; } -void /* __init_or_exit */ regulatory_exit(void) +void regulatory_exit(void) { struct regulatory_request *reg_request, *tmp; struct reg_beacon *reg_beacon, *btmp; diff --git a/net/wireless/reg.h b/net/wireless/reg.h index 4c0a32ffd530..37891e813a74 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -55,8 +55,8 @@ bool reg_last_request_cell_base(void); * set the wiphy->disable_beacon_hints to true. */ int regulatory_hint_found_beacon(struct wiphy *wiphy, - struct ieee80211_channel *beacon_chan, - gfp_t gfp); + struct ieee80211_channel *beacon_chan, + gfp_t gfp); /** * regulatory_hint_11d - hints a country IE as a regulatory domain diff --git a/net/wireless/sme.c b/net/wireless/sme.c index f2431e41a373..d2d26518cdd7 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -519,10 +519,8 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, * - country_ie + 2, the start of the country ie data, and * - and country_ie[1] which is the IE length */ - regulatory_hint_11d(wdev->wiphy, - bss->channel->band, - country_ie + 2, - country_ie[1]); + regulatory_hint_11d(wdev->wiphy, bss->channel->band, + country_ie + 2, country_ie[1]); kfree(country_ie); } -- cgit v1.2.3 From 9027b1493b57a6a8f9f56741e4c4189048ea5633 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 17:59:24 +0100 Subject: regulatory: remove useless locking on exit It would be a major problem if anything were to run concurrently while the module is being unloaded so remove the locking that doesn't help anything. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index cf2fb3425a63..cf4386fade8a 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2382,34 +2382,29 @@ void regulatory_exit(void) cancel_work_sync(®_work); cancel_delayed_work_sync(®_timeout); + /* Lock to suppress warnings */ mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(true); + mutex_unlock(&cfg80211_mutex); + mutex_unlock(®_mutex); dev_set_uevent_suppress(®_pdev->dev, true); platform_device_unregister(reg_pdev); - spin_lock_bh(®_pending_beacons_lock); list_for_each_entry_safe(reg_beacon, btmp, ®_pending_beacons, list) { list_del(®_beacon->list); kfree(reg_beacon); } - spin_unlock_bh(®_pending_beacons_lock); list_for_each_entry_safe(reg_beacon, btmp, ®_beacon_list, list) { list_del(®_beacon->list); kfree(reg_beacon); } - spin_lock(®_requests_lock); list_for_each_entry_safe(reg_request, tmp, ®_requests_list, list) { list_del(®_request->list); kfree(reg_request); } - spin_unlock(®_requests_lock); - - mutex_unlock(®_mutex); - mutex_unlock(&cfg80211_mutex); } -- cgit v1.2.3 From 2f92212b71f198d42060f7133ff1dc4edf438f6c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 17:54:55 +0100 Subject: regulatory: use proper enum for return values Instead of treating special error codes specially, like -EALREADY, introduce a real enum for all the needed possibilities and use it. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 133 +++++++++++++++++++++++++++-------------------------- 1 file changed, 69 insertions(+), 64 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index cf4386fade8a..129586994662 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -65,6 +65,13 @@ #define REG_DBG_PRINT(args...) #endif +enum reg_request_treatment { + REG_REQ_OK, + REG_REQ_IGNORE, + REG_REQ_INTERSECT, + REG_REQ_ALREADY_SET, +}; + static struct regulatory_request core_request_world = { .initiator = NL80211_REGDOM_SET_BY_CORE, .alpha2[0] = '0', @@ -925,16 +932,17 @@ bool reg_last_request_cell_base(void) #ifdef CONFIG_CFG80211_CERTIFICATION_ONUS /* Core specific check */ -static int reg_ignore_cell_hint(struct regulatory_request *pending_request) +static enum reg_request_treatment +reg_ignore_cell_hint(struct regulatory_request *pending_request) { if (!reg_num_devs_support_basehint) - return -EOPNOTSUPP; + return REG_REQ_IGNORE; if (reg_request_cell_base(last_request) && !regdom_changes(pending_request->alpha2)) - return -EALREADY; + return REG_REQ_ALREADY_SET; - return 0; + return REG_REQ_OK; } /* Device specific check */ @@ -945,7 +953,7 @@ static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) #else static int reg_ignore_cell_hint(struct regulatory_request *pending_request) { - return -EOPNOTSUPP; + return REG_REQ_IGNORE; } static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) @@ -1308,15 +1316,10 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, } EXPORT_SYMBOL(wiphy_apply_custom_regulatory); -/* - * Return value which can be used by ignore_request() to indicate - * it has been determined we should intersect two regulatory domains - */ -#define REG_INTERSECT 1 - /* This has the logic which determines when a new request * should be ignored. */ -static int ignore_request(struct wiphy *wiphy, +static enum reg_request_treatment +get_reg_request_treatment(struct wiphy *wiphy, struct regulatory_request *pending_request) { struct wiphy *last_wiphy = NULL; @@ -1325,17 +1328,17 @@ static int ignore_request(struct wiphy *wiphy, /* All initial requests are respected */ if (!last_request) - return 0; + return REG_REQ_OK; switch (pending_request->initiator) { case NL80211_REGDOM_SET_BY_CORE: - return 0; + return REG_REQ_OK; case NL80211_REGDOM_SET_BY_COUNTRY_IE: if (reg_request_cell_base(last_request)) { /* Trust a Cell base station over the AP's country IE */ if (regdom_changes(pending_request->alpha2)) - return -EOPNOTSUPP; - return -EALREADY; + return REG_REQ_IGNORE; + return REG_REQ_ALREADY_SET; } last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); @@ -1352,23 +1355,23 @@ static int ignore_request(struct wiphy *wiphy, * to be correct. Reject second one for now. */ if (regdom_changes(pending_request->alpha2)) - return -EOPNOTSUPP; - return -EALREADY; + return REG_REQ_IGNORE; + return REG_REQ_ALREADY_SET; } /* * Two consecutive Country IE hints on the same wiphy. * This should be picked up early by the driver/stack */ if (WARN_ON(regdom_changes(pending_request->alpha2))) - return 0; - return -EALREADY; + return REG_REQ_OK; + return REG_REQ_ALREADY_SET; } return 0; case NL80211_REGDOM_SET_BY_DRIVER: if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE) { if (regdom_changes(pending_request->alpha2)) - return 0; - return -EALREADY; + return REG_REQ_OK; + return REG_REQ_ALREADY_SET; } /* @@ -1378,25 +1381,25 @@ static int ignore_request(struct wiphy *wiphy, */ if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && !regdom_changes(pending_request->alpha2)) - return -EALREADY; + return REG_REQ_ALREADY_SET; - return REG_INTERSECT; + return REG_REQ_INTERSECT; case NL80211_REGDOM_SET_BY_USER: if (reg_request_cell_base(pending_request)) return reg_ignore_cell_hint(pending_request); if (reg_request_cell_base(last_request)) - return -EOPNOTSUPP; + return REG_REQ_IGNORE; if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) - return REG_INTERSECT; + return REG_REQ_INTERSECT; /* * If the user knows better the user should set the regdom * to their country before the IE is picked up */ if (last_request->initiator == NL80211_REGDOM_SET_BY_USER && last_request->intersect) - return -EOPNOTSUPP; + return REG_REQ_IGNORE; /* * Process user requests only after previous user/driver/core * requests have been processed @@ -1405,15 +1408,15 @@ static int ignore_request(struct wiphy *wiphy, last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || last_request->initiator == NL80211_REGDOM_SET_BY_USER) && regdom_changes(last_request->alpha2)) - return -EAGAIN; + return REG_REQ_IGNORE; if (!regdom_changes(pending_request->alpha2)) - return -EALREADY; + return REG_REQ_ALREADY_SET; - return 0; + return REG_REQ_OK; } - return -EINVAL; + return REG_REQ_IGNORE; } static void reg_set_request_processed(void) @@ -1443,23 +1446,24 @@ static void reg_set_request_processed(void) * The Wireless subsystem can use this function to hint to the wireless core * what it believes should be the current regulatory domain. * - * Returns zero if all went fine, %-EALREADY if a regulatory domain had - * already been set or other standard error codes. + * Returns one of the different reg request treatment values. * * Caller must hold &cfg80211_mutex and ®_mutex */ -static int __regulatory_hint(struct wiphy *wiphy, - struct regulatory_request *pending_request) +static enum reg_request_treatment +__regulatory_hint(struct wiphy *wiphy, + struct regulatory_request *pending_request) { const struct ieee80211_regdomain *regd; bool intersect = false; - int r = 0; + enum reg_request_treatment treatment; assert_cfg80211_lock(); - r = ignore_request(wiphy, pending_request); + treatment = get_reg_request_treatment(wiphy, pending_request); - if (r == REG_INTERSECT) { + switch (treatment) { + case REG_REQ_INTERSECT: if (pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { regd = reg_copy_regd(cfg80211_regdomain); @@ -1470,26 +1474,28 @@ static int __regulatory_hint(struct wiphy *wiphy, wiphy->regd = regd; } intersect = true; - } else if (r) { + break; + case REG_REQ_OK: + break; + default: /* * If the regulatory domain being requested by the * driver has already been set just copy it to the * wiphy */ - if (r == -EALREADY && - pending_request->initiator == - NL80211_REGDOM_SET_BY_DRIVER) { + if (treatment == REG_REQ_ALREADY_SET && + pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { regd = reg_copy_regd(cfg80211_regdomain); if (IS_ERR(regd)) { kfree(pending_request); - return PTR_ERR(regd); + return REG_REQ_IGNORE; } - r = -EALREADY; + treatment = REG_REQ_ALREADY_SET; wiphy->regd = regd; goto new_request; } kfree(pending_request); - return r; + return treatment; } new_request: @@ -1506,28 +1512,29 @@ new_request: user_alpha2[1] = last_request->alpha2[1]; } - /* When r == REG_INTERSECT we do need to call CRDA */ - if (r < 0) { + /* When r == REG_REQ_INTERSECT we do need to call CRDA */ + if (treatment != REG_REQ_OK && treatment != REG_REQ_INTERSECT) { /* * Since CRDA will not be called in this case as we already * have applied the requested regulatory domain before we just * inform userspace we have processed the request */ - if (r == -EALREADY) { + if (treatment == REG_REQ_ALREADY_SET) { nl80211_send_reg_change_event(last_request); reg_set_request_processed(); } - return r; + return treatment; } - return call_crda(last_request->alpha2); + if (call_crda(last_request->alpha2)) + return REG_REQ_IGNORE; + return REG_REQ_OK; } /* This processes *all* regulatory hints */ static void reg_process_hint(struct regulatory_request *reg_request, enum nl80211_reg_initiator reg_initiator) { - int r = 0; struct wiphy *wiphy = NULL; BUG_ON(!reg_request->alpha2); @@ -1540,20 +1547,18 @@ static void reg_process_hint(struct regulatory_request *reg_request, return; } - r = __regulatory_hint(wiphy, reg_request); - /* This is required so that the orig_* parameters are saved */ - if (r == -EALREADY && wiphy && - wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) { - wiphy_update_regulatory(wiphy, reg_initiator); - return; + switch (__regulatory_hint(wiphy, reg_request)) { + case REG_REQ_ALREADY_SET: + /* This is required so that the orig_* parameters are saved */ + if (wiphy && wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) + wiphy_update_regulatory(wiphy, reg_initiator); + break; + default: + if (reg_initiator == NL80211_REGDOM_SET_BY_USER) + schedule_delayed_work(®_timeout, + msecs_to_jiffies(3142)); + break; } - - /* - * We only time out user hints, given that they should be the only - * source of bogus requests. - */ - if (r != -EALREADY && reg_initiator == NL80211_REGDOM_SET_BY_USER) - schedule_delayed_work(®_timeout, msecs_to_jiffies(3142)); } /* -- cgit v1.2.3 From f41737669d2f4c07c09e90767498243e142171f9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 18:23:37 +0100 Subject: cfg80211: remove wiphy_idx_valid This is pretty much useless since get_wiphy_idx() always returns true since it's always called with a valid wiphy pointer. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/core.c | 14 +++----------- net/wireless/core.h | 16 +++------------- net/wireless/nl80211.c | 2 +- net/wireless/reg.c | 14 +++++--------- 4 files changed, 12 insertions(+), 34 deletions(-) diff --git a/net/wireless/core.c b/net/wireless/core.c index 14d990400354..747dd9365a44 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -57,9 +57,6 @@ struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx) { struct cfg80211_registered_device *result = NULL, *rdev; - if (!wiphy_idx_valid(wiphy_idx)) - return NULL; - assert_cfg80211_lock(); list_for_each_entry(rdev, &cfg80211_rdev_list, list) { @@ -74,10 +71,8 @@ struct cfg80211_registered_device *cfg80211_rdev_by_wiphy_idx(int wiphy_idx) int get_wiphy_idx(struct wiphy *wiphy) { - struct cfg80211_registered_device *rdev; - if (!wiphy) - return WIPHY_IDX_STALE; - rdev = wiphy_to_dev(wiphy); + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + return rdev->wiphy_idx; } @@ -86,9 +81,6 @@ struct wiphy *wiphy_idx_to_wiphy(int wiphy_idx) { struct cfg80211_registered_device *rdev; - if (!wiphy_idx_valid(wiphy_idx)) - return NULL; - assert_cfg80211_lock(); rdev = cfg80211_rdev_by_wiphy_idx(wiphy_idx); @@ -309,7 +301,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) rdev->wiphy_idx = wiphy_counter++; - if (unlikely(!wiphy_idx_valid(rdev->wiphy_idx))) { + if (unlikely(rdev->wiphy_idx < 0)) { wiphy_counter--; mutex_unlock(&cfg80211_mutex); /* ugh, wrapped! */ diff --git a/net/wireless/core.h b/net/wireless/core.h index 3563097169cb..b8f4630c6ada 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -18,6 +18,9 @@ #include #include "reg.h" + +#define WIPHY_IDX_INVALID -1 + struct cfg80211_registered_device { const struct cfg80211_ops *ops; struct list_head list; @@ -96,13 +99,6 @@ struct cfg80211_registered_device *wiphy_to_dev(struct wiphy *wiphy) return container_of(wiphy, struct cfg80211_registered_device, wiphy); } -/* Note 0 is valid, hence phy0 */ -static inline -bool wiphy_idx_valid(int wiphy_idx) -{ - return wiphy_idx >= 0; -} - static inline void cfg80211_rdev_free_wowlan(struct cfg80211_registered_device *rdev) { @@ -126,12 +122,6 @@ static inline void assert_cfg80211_lock(void) lockdep_assert_held(&cfg80211_mutex); } -/* - * You can use this to mark a wiphy_idx as not having an associated wiphy. - * It guarantees cfg80211_rdev_by_wiphy_idx(wiphy_idx) will return NULL - */ -#define WIPHY_IDX_STALE -1 - struct cfg80211_internal_bss { struct list_head list; struct rb_node rbn; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index a19583cf4b6e..5fbc8cd9731b 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -8048,7 +8048,7 @@ void nl80211_send_reg_change_event(struct regulatory_request *request) goto nla_put_failure; } - if (wiphy_idx_valid(request->wiphy_idx) && + if (request->wiphy_idx != WIPHY_IDX_INVALID && nla_put_u32(msg, NL80211_ATTR_WIPHY, request->wiphy_idx)) goto nla_put_failure; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 129586994662..b825c82e5a45 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1539,7 +1539,7 @@ static void reg_process_hint(struct regulatory_request *reg_request, BUG_ON(!reg_request->alpha2); - if (wiphy_idx_valid(reg_request->wiphy_idx)) + if (reg_request->wiphy_idx != WIPHY_IDX_INVALID) wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); if (reg_initiator == NL80211_REGDOM_SET_BY_DRIVER && !wiphy) { @@ -1684,7 +1684,7 @@ int regulatory_hint_user(const char *alpha2, if (!request) return -ENOMEM; - request->wiphy_idx = WIPHY_IDX_STALE; + request->wiphy_idx = WIPHY_IDX_INVALID; request->alpha2[0] = alpha2[0]; request->alpha2[1] = alpha2[1]; request->initiator = NL80211_REGDOM_SET_BY_USER; @@ -1709,9 +1709,6 @@ int regulatory_hint(struct wiphy *wiphy, const char *alpha2) request->wiphy_idx = get_wiphy_idx(wiphy); - /* Must have registered wiphy first */ - BUG_ON(!wiphy_idx_valid(request->wiphy_idx)); - request->alpha2[0] = alpha2[0]; request->alpha2[1] = alpha2[1]; request->initiator = NL80211_REGDOM_SET_BY_DRIVER; @@ -1758,9 +1755,8 @@ void regulatory_hint_11d(struct wiphy *wiphy, enum ieee80211_band band, * We leave conflict resolution to the workqueue, where can hold * cfg80211_mutex. */ - if (likely(last_request->initiator == - NL80211_REGDOM_SET_BY_COUNTRY_IE && - wiphy_idx_valid(last_request->wiphy_idx))) + if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && + last_request->wiphy_idx != WIPHY_IDX_INVALID) goto out; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); @@ -2317,7 +2313,7 @@ void wiphy_regulatory_deregister(struct wiphy *wiphy) if (!request_wiphy || request_wiphy != wiphy) goto out; - last_request->wiphy_idx = WIPHY_IDX_STALE; + last_request->wiphy_idx = WIPHY_IDX_INVALID; last_request->country_ie_env = ENVIRON_ANY; out: mutex_unlock(®_mutex); -- cgit v1.2.3 From fdc9d7b2863ce67f51ed64f89e5b20f3077be569 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 18:36:09 +0100 Subject: regulatory: remove BUG_ON This code is a bit too BUG_ON happy, remove all instances and while doing so make some code a bit smarter by passing the right pointer instead of indices into arrays. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 2 -- net/wireless/reg.c | 95 ++++++++++++++++++++------------------------------ 2 files changed, 37 insertions(+), 60 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 5fbc8cd9731b..9c2c91845be7 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4309,8 +4309,6 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) } } - BUG_ON(rule_idx != num_rules); - r = set_regdom(rd); rd = NULL; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index b825c82e5a45..57812dfc297b 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -213,7 +213,7 @@ static void reset_regdomains(bool full_reset) */ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { - BUG_ON(!last_request); + WARN_ON(!last_request); reset_regdomains(false); @@ -804,8 +804,7 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, */ static void handle_channel(struct wiphy *wiphy, enum nl80211_reg_initiator initiator, - enum ieee80211_band band, - unsigned int chan_idx) + struct ieee80211_channel *chan) { int r; u32 flags, bw_flags = 0; @@ -813,18 +812,12 @@ static void handle_channel(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; - struct ieee80211_supported_band *sband; - struct ieee80211_channel *chan; struct wiphy *request_wiphy = NULL; assert_cfg80211_lock(); request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); - sband = wiphy->bands[band]; - BUG_ON(chan_idx >= sband->n_channels); - chan = &sband->channels[chan_idx]; - flags = chan->orig_flags; r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), @@ -897,17 +890,17 @@ static void handle_channel(struct wiphy *wiphy, chan->max_power = chan->max_reg_power; } -static void handle_band(struct wiphy *wiphy, enum ieee80211_band band, - enum nl80211_reg_initiator initiator) +static void handle_band(struct wiphy *wiphy, + enum nl80211_reg_initiator initiator, + struct ieee80211_supported_band *sband) { unsigned int i; - struct ieee80211_supported_band *sband; - BUG_ON(!wiphy->bands[band]); - sband = wiphy->bands[band]; + if (!sband) + return; for (i = 0; i < sband->n_channels; i++) - handle_channel(wiphy, initiator, band, i); + handle_channel(wiphy, initiator, &sband->channels[i]); } static bool reg_request_cell_base(struct regulatory_request *request) @@ -1116,20 +1109,14 @@ static bool is_ht40_allowed(struct ieee80211_channel *chan) } static void reg_process_ht_flags_channel(struct wiphy *wiphy, - enum ieee80211_band band, - unsigned int chan_idx) + struct ieee80211_channel *channel) { - struct ieee80211_supported_band *sband; - struct ieee80211_channel *channel; + struct ieee80211_supported_band *sband = wiphy->bands[channel->band]; struct ieee80211_channel *channel_before = NULL, *channel_after = NULL; unsigned int i; assert_cfg80211_lock(); - sband = wiphy->bands[band]; - BUG_ON(chan_idx >= sband->n_channels); - channel = &sband->channels[chan_idx]; - if (!is_ht40_allowed(channel)) { channel->flags |= IEEE80211_CHAN_NO_HT40; return; @@ -1165,16 +1152,15 @@ static void reg_process_ht_flags_channel(struct wiphy *wiphy, } static void reg_process_ht_flags_band(struct wiphy *wiphy, - enum ieee80211_band band) + struct ieee80211_supported_band *sband) { unsigned int i; - struct ieee80211_supported_band *sband; - BUG_ON(!wiphy->bands[band]); - sband = wiphy->bands[band]; + if (!sband) + return; for (i = 0; i < sband->n_channels; i++) - reg_process_ht_flags_channel(wiphy, band, i); + reg_process_ht_flags_channel(wiphy, &sband->channels[i]); } static void reg_process_ht_flags(struct wiphy *wiphy) @@ -1184,11 +1170,8 @@ static void reg_process_ht_flags(struct wiphy *wiphy) if (!wiphy) return; - for (band = 0; band < IEEE80211_NUM_BANDS; band++) { - if (wiphy->bands[band]) - reg_process_ht_flags_band(wiphy, band); - } - + for (band = 0; band < IEEE80211_NUM_BANDS; band++) + reg_process_ht_flags_band(wiphy, wiphy->bands[band]); } static void wiphy_update_regulatory(struct wiphy *wiphy, @@ -1203,10 +1186,8 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, last_request->dfs_region = cfg80211_regdomain->dfs_region; - for (band = 0; band < IEEE80211_NUM_BANDS; band++) { - if (wiphy->bands[band]) - handle_band(wiphy, band, initiator); - } + for (band = 0; band < IEEE80211_NUM_BANDS; band++) + handle_band(wiphy, initiator, wiphy->bands[band]); reg_process_beacons(wiphy); reg_process_ht_flags(wiphy); @@ -1236,8 +1217,7 @@ static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) } static void handle_channel_custom(struct wiphy *wiphy, - enum ieee80211_band band, - unsigned int chan_idx, + struct ieee80211_channel *chan, const struct ieee80211_regdomain *regd) { int r; @@ -1246,15 +1226,9 @@ static void handle_channel_custom(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; - struct ieee80211_supported_band *sband; - struct ieee80211_channel *chan; assert_reg_lock(); - sband = wiphy->bands[band]; - BUG_ON(chan_idx >= sband->n_channels); - chan = &sband->channels[chan_idx]; - r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), desired_bw_khz, ®_rule, regd); @@ -1279,17 +1253,17 @@ static void handle_channel_custom(struct wiphy *wiphy, (int) MBM_TO_DBM(power_rule->max_eirp); } -static void handle_band_custom(struct wiphy *wiphy, enum ieee80211_band band, +static void handle_band_custom(struct wiphy *wiphy, + struct ieee80211_supported_band *sband, const struct ieee80211_regdomain *regd) { unsigned int i; - struct ieee80211_supported_band *sband; - BUG_ON(!wiphy->bands[band]); - sband = wiphy->bands[band]; + if (!sband) + return; for (i = 0; i < sband->n_channels; i++) - handle_channel_custom(wiphy, band, i, regd); + handle_channel_custom(wiphy, &sband->channels[i], regd); } /* Used by drivers prior to wiphy registration */ @@ -1303,7 +1277,7 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (!wiphy->bands[band]) continue; - handle_band_custom(wiphy, band, regd); + handle_band_custom(wiphy, wiphy->bands[band], regd); bands_set++; } mutex_unlock(®_mutex); @@ -1537,7 +1511,8 @@ static void reg_process_hint(struct regulatory_request *reg_request, { struct wiphy *wiphy = NULL; - BUG_ON(!reg_request->alpha2); + if (WARN_ON(!reg_request->alpha2)) + return; if (reg_request->wiphy_idx != WIPHY_IDX_INVALID) wiphy = wiphy_idx_to_wiphy(reg_request->wiphy_idx); @@ -1678,7 +1653,8 @@ int regulatory_hint_user(const char *alpha2, { struct regulatory_request *request; - BUG_ON(!alpha2); + if (WARN_ON(!alpha2)) + return -EINVAL; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); if (!request) @@ -1700,8 +1676,8 @@ int regulatory_hint(struct wiphy *wiphy, const char *alpha2) { struct regulatory_request *request; - BUG_ON(!alpha2); - BUG_ON(!wiphy); + if (WARN_ON(!alpha2 || !wiphy)) + return -EINVAL; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); if (!request) @@ -2239,12 +2215,14 @@ int set_regdom(const struct ieee80211_regdomain *rd) reg_set_request_processed(); kfree(rd); - mutex_unlock(®_mutex); - return r; + goto out; } /* This would make this whole thing pointless */ - BUG_ON(!last_request->intersect && rd != cfg80211_regdomain); + if (WARN_ON(!last_request->intersect && rd != cfg80211_regdomain)) { + r = -EINVAL; + goto out; + } /* update all wiphys now with the new established regulatory domain */ update_all_wiphy_regulatory(last_request->initiator); @@ -2255,6 +2233,7 @@ int set_regdom(const struct ieee80211_regdomain *rd) reg_set_request_processed(); + out: mutex_unlock(®_mutex); return r; -- cgit v1.2.3 From 11cff96c0660e1e361d60ab90514ffbbfbaf7c03 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 18:56:41 +0100 Subject: regulatory: simplify restore_regulatory_settings Use list_splice_tail_init() and also simplify the locking. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 57812dfc297b..87daba95639c 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1878,9 +1878,6 @@ static void restore_regulatory_settings(bool reset_user) restore_custom_reg_settings(&rdev->wiphy); } - mutex_unlock(®_mutex); - mutex_unlock(&cfg80211_mutex); - regulatory_hint_core(world_alpha2); /* @@ -1891,18 +1888,8 @@ static void restore_regulatory_settings(bool reset_user) if (is_an_alpha2(alpha2)) regulatory_hint_user(user_alpha2, NL80211_USER_REG_HINT_USER); - if (list_empty(&tmp_reg_req_list)) - return; - - mutex_lock(&cfg80211_mutex); - mutex_lock(®_mutex); - spin_lock(®_requests_lock); - list_for_each_entry_safe(reg_request, tmp, &tmp_reg_req_list, list) { - REG_DBG_PRINT("Adding request for country %c%c back into the queue\n", - reg_request->alpha2[0], reg_request->alpha2[1]); - list_move_tail(®_request->list, ®_requests_list); - } + list_splice_tail_init(&tmp_reg_req_list, ®_requests_list); spin_unlock(®_requests_lock); mutex_unlock(®_mutex); -- cgit v1.2.3 From d4f2c8819a51f31ef0f929574ce8d80b323c6a76 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 18:59:58 +0100 Subject: regulatory: remove redundant isalpha() check toupper() only modifies lower-case letters, so the isalpha() check is redundant; remove it. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 87daba95639c..946cd5320ef9 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1614,10 +1614,8 @@ static void reg_todo(struct work_struct *work) static void queue_regulatory_request(struct regulatory_request *request) { - if (isalpha(request->alpha2[0])) - request->alpha2[0] = toupper(request->alpha2[0]); - if (isalpha(request->alpha2[1])) - request->alpha2[1] = toupper(request->alpha2[1]); + request->alpha2[0] = toupper(request->alpha2[0]); + request->alpha2[1] = toupper(request->alpha2[1]); spin_lock(®_requests_lock); list_add_tail(&request->list, ®_requests_list); -- cgit v1.2.3 From 0ba857ad671aa8aa2a1276aa7a0c79abd0575146 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 19:12:02 +0100 Subject: regulatory: remove useless warning Even if it never happens and is hidden behind the debug config option, it's completely useless: the calltrace will only show module loading. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 946cd5320ef9..b63bdf899a75 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2322,10 +2322,6 @@ int __init regulatory_init(void) * errors as non-fatal. */ pr_err("kobject_uevent_env() was unable to call CRDA during init\n"); -#ifdef CONFIG_CFG80211_REG_DEBUG - /* We want to find out exactly why when debugging */ - WARN_ON(err); -#endif } /* -- cgit v1.2.3 From 5d885b999c68283c493cf00cc020260d38951ae6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 00:14:17 +0100 Subject: regulatory: simplify freq_reg_info_regd The function itself has dual-purpose: it can retrieve from a given regdomain or from the globally installed one. Change it to have a single purpose only: to look up from a given regdomain. Pass the correct regdomain in the freq_reg_info() function instead. This also changes the locking rules for it, no locking is required any more. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index b63bdf899a75..75239789213a 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -678,28 +678,15 @@ static int freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, u32 desired_bw_khz, const struct ieee80211_reg_rule **reg_rule, - const struct ieee80211_regdomain *custom_regd) + const struct ieee80211_regdomain *regd) { int i; bool band_rule_found = false; - const struct ieee80211_regdomain *regd; bool bw_fits = false; if (!desired_bw_khz) desired_bw_khz = MHZ_TO_KHZ(20); - regd = custom_regd ? custom_regd : cfg80211_regdomain; - - /* - * Follow the driver's regulatory domain, if present, unless a country - * IE has been processed or a user wants to help complaince further - */ - if (!custom_regd && - last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && - last_request->initiator != NL80211_REGDOM_SET_BY_USER && - wiphy->regd) - regd = wiphy->regd; - if (!regd) return -EINVAL; @@ -735,10 +722,24 @@ static int freq_reg_info_regd(struct wiphy *wiphy, int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 desired_bw_khz, const struct ieee80211_reg_rule **reg_rule) { + const struct ieee80211_regdomain *regd; + + assert_reg_lock(); assert_cfg80211_lock(); + /* + * Follow the driver's regulatory domain, if present, unless a country + * IE has been processed or a user wants to help complaince further + */ + if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + last_request->initiator != NL80211_REGDOM_SET_BY_USER && + wiphy->regd) + regd = wiphy->regd; + else + regd = cfg80211_regdomain; + return freq_reg_info_regd(wiphy, center_freq, desired_bw_khz, - reg_rule, NULL); + reg_rule, regd); } EXPORT_SYMBOL(freq_reg_info); -- cgit v1.2.3 From e8da2bb4fe9ecb888f44714e2624c7d4268ac09d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 Dec 2012 23:00:08 +0100 Subject: regulatory: clarify locking rules and assertions Many places that currently check that cfg80211_mutex is held don't actually use any data protected by it. The functions that need to hold the cfg80211_mutex are the ones using the cfg80211_regdomain variable, so add the lock assertion to those and clarify this in the comments. The reason for this is that nl80211 uses the regdom without being able to hold reg_mutex. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 31 +++++++++++-------------------- 1 file changed, 11 insertions(+), 20 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 75239789213a..603a01911a50 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -94,14 +94,14 @@ static struct device_type reg_device_type = { /* * Central wireless core regulatory domains, we only need two, * the current one and a world regulatory domain in case we have no - * information to give us an alpha2 + * information to give us an alpha2. + * Protected by the cfg80211_mutex. */ const struct ieee80211_regdomain *cfg80211_regdomain; /* * Protects static reg.c components: * - cfg80211_world_regdom - * - cfg80211_regdom * - last_request * - reg_num_devs_support_basehint */ @@ -185,6 +185,9 @@ MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); static void reset_regdomains(bool full_reset) { + assert_cfg80211_lock(); + assert_reg_lock(); + /* avoid freeing static information or freeing something twice */ if (cfg80211_regdomain == cfg80211_world_regdom) cfg80211_regdomain = NULL; @@ -215,6 +218,9 @@ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { WARN_ON(!last_request); + assert_cfg80211_lock(); + assert_reg_lock(); + reset_regdomains(false); cfg80211_world_regdom = rd; @@ -422,8 +428,6 @@ static int call_crda(const char *alpha2) /* Used by nl80211 before kmalloc'ing our regulatory domain */ bool reg_is_valid_request(const char *alpha2) { - assert_cfg80211_lock(); - if (!last_request) return false; @@ -915,8 +919,6 @@ bool reg_last_request_cell_base(void) { bool val; - assert_cfg80211_lock(); - mutex_lock(®_mutex); val = reg_request_cell_base(last_request); mutex_unlock(®_mutex); @@ -999,8 +1001,6 @@ static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, bool channel_changed = false; struct ieee80211_channel chan_before; - assert_cfg80211_lock(); - sband = wiphy->bands[reg_beacon->chan.band]; chan = &sband->channels[chan_idx]; @@ -1042,8 +1042,6 @@ static void wiphy_update_new_beacon(struct wiphy *wiphy, unsigned int i; struct ieee80211_supported_band *sband; - assert_cfg80211_lock(); - if (!wiphy->bands[reg_beacon->chan.band]) return; @@ -1062,8 +1060,6 @@ static void wiphy_update_beacon_reg(struct wiphy *wiphy) struct ieee80211_supported_band *sband; struct reg_beacon *reg_beacon; - assert_cfg80211_lock(); - list_for_each_entry(reg_beacon, ®_beacon_list, list) { if (!wiphy->bands[reg_beacon->chan.band]) continue; @@ -1075,6 +1071,8 @@ static void wiphy_update_beacon_reg(struct wiphy *wiphy) static bool reg_is_world_roaming(struct wiphy *wiphy) { + assert_cfg80211_lock(); + if (is_world_regdom(cfg80211_regdomain->alpha2) || (wiphy->regd && is_world_regdom(wiphy->regd->alpha2))) return true; @@ -1116,8 +1114,6 @@ static void reg_process_ht_flags_channel(struct wiphy *wiphy, struct ieee80211_channel *channel_before = NULL, *channel_after = NULL; unsigned int i; - assert_cfg80211_lock(); - if (!is_ht40_allowed(channel)) { channel->flags |= IEEE80211_CHAN_NO_HT40; return; @@ -1180,6 +1176,7 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, { enum ieee80211_band band; + assert_cfg80211_lock(); assert_reg_lock(); if (ignore_reg_update(wiphy, initiator)) @@ -1299,8 +1296,6 @@ get_reg_request_treatment(struct wiphy *wiphy, { struct wiphy *last_wiphy = NULL; - assert_cfg80211_lock(); - /* All initial requests are respected */ if (!last_request) return REG_REQ_OK; @@ -2246,8 +2241,6 @@ int reg_device_uevent(struct device *dev, struct kobj_uevent_env *env) void wiphy_regulatory_register(struct wiphy *wiphy) { - assert_cfg80211_lock(); - mutex_lock(®_mutex); if (!reg_dev_ignore_cell_hint(wiphy)) @@ -2263,8 +2256,6 @@ void wiphy_regulatory_deregister(struct wiphy *wiphy) { struct wiphy *request_wiphy = NULL; - assert_cfg80211_lock(); - mutex_lock(®_mutex); if (!reg_dev_ignore_cell_hint(wiphy)) -- cgit v1.2.3 From 540f6f2cc545da9ae2baa9faa3152fc550bedb57 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 00:19:24 +0100 Subject: regulatory: remove locking from wiphy_apply_custom_regulatory wiphy_apply_custom_regulatory() doesn't have to hold the regulatory mutex as it only modifies the given wiphy with the given regulatory domain, it doesn't access any global regulatory data. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 603a01911a50..752729ecd701 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1225,8 +1225,6 @@ static void handle_channel_custom(struct wiphy *wiphy, const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; - assert_reg_lock(); - r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), desired_bw_khz, ®_rule, regd); @@ -1271,14 +1269,12 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy, enum ieee80211_band band; unsigned int bands_set = 0; - mutex_lock(®_mutex); for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (!wiphy->bands[band]) continue; handle_band_custom(wiphy, wiphy->bands[band], regd); bands_set++; } - mutex_unlock(®_mutex); /* * no point in calling this if it won't have any effect -- cgit v1.2.3 From 6913b49a5071064f49f7a74b432286fa735f7612 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 00:48:59 +0100 Subject: regulatory: fix reg_is_valid_request handling There's a bug with the world regulatory domain, it can be updated any time which is different from all other regdomains that can only be updated once after a request for them. Fix this by adding a check for "processed" to the reg_is_valid_request() function and clear that when doing a request. While looking at this I also found another locking bug, last_request is protected by the reg_mutex not the cfg80211_mutex so the code in nl80211 is racy. Remove that code as it only tries to prevent an allocation in an error case, which isn't necessary. Then the function can also become static and locking in nl80211 can have a smaller scope. Also change __set_regdom() to do the checks earlier and not different for world/other regdomains. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 18 ++++++------------ net/wireless/reg.c | 21 +++++++++++---------- net/wireless/reg.h | 1 - 3 files changed, 17 insertions(+), 23 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 9c2c91845be7..b387deaf1132 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4265,21 +4265,12 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) return -EINVAL; } - mutex_lock(&cfg80211_mutex); - - if (!reg_is_valid_request(alpha2)) { - r = -EINVAL; - goto bad_reg; - } - size_of_regd = sizeof(struct ieee80211_regdomain) + num_rules * sizeof(struct ieee80211_reg_rule); rd = kzalloc(size_of_regd, GFP_KERNEL); - if (!rd) { - r = -ENOMEM; - goto bad_reg; - } + if (!rd) + return -ENOMEM; rd->n_reg_rules = num_rules; rd->alpha2[0] = alpha2[0]; @@ -4309,11 +4300,14 @@ static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info) } } + mutex_lock(&cfg80211_mutex); + r = set_regdom(rd); + /* set_regdom took ownership */ rd = NULL; + mutex_unlock(&cfg80211_mutex); bad_reg: - mutex_unlock(&cfg80211_mutex); kfree(rd); return r; } diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 752729ecd701..b3f94c957d1d 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -425,12 +425,16 @@ static int call_crda(const char *alpha2) return kobject_uevent(®_pdev->dev.kobj, KOBJ_CHANGE); } -/* Used by nl80211 before kmalloc'ing our regulatory domain */ -bool reg_is_valid_request(const char *alpha2) +static bool reg_is_valid_request(const char *alpha2) { + assert_reg_lock(); + if (!last_request) return false; + if (last_request->processed) + return false; + return alpha2_equal(last_request->alpha2, alpha2); } @@ -1470,6 +1474,7 @@ new_request: last_request = pending_request; last_request->intersect = intersect; + last_request->processed = false; pending_request = NULL; @@ -2060,11 +2065,13 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) const struct ieee80211_regdomain *regd; const struct ieee80211_regdomain *intersected_rd = NULL; struct wiphy *request_wiphy; + /* Some basic sanity checks first */ + if (!reg_is_valid_request(rd->alpha2)) + return -EINVAL; + if (is_world_regdom(rd->alpha2)) { - if (WARN_ON(!reg_is_valid_request(rd->alpha2))) - return -EINVAL; update_world_regdomain(rd); return 0; } @@ -2073,9 +2080,6 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) !is_unknown_alpha2(rd->alpha2)) return -EINVAL; - if (!last_request) - return -EINVAL; - /* * Lets only bother proceeding on the same alpha2 if the current * rd is non static (it means CRDA was present and was used last) @@ -2097,9 +2101,6 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * internal EEPROM data */ - if (WARN_ON(!reg_is_valid_request(rd->alpha2))) - return -EINVAL; - if (!is_valid_rd(rd)) { pr_err("Invalid regulatory domain detected:\n"); print_regdomain_info(rd); diff --git a/net/wireless/reg.h b/net/wireless/reg.h index 37891e813a74..d391b50d2829 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -19,7 +19,6 @@ extern const struct ieee80211_regdomain *cfg80211_regdomain; bool is_world_regdom(const char *alpha2); -bool reg_is_valid_request(const char *alpha2); bool reg_supported_dfs_region(u8 dfs_region); int regulatory_hint_user(const char *alpha2, -- cgit v1.2.3 From fe7ef5e9ba0c60bab01390493a4c6790f7b093af Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Dec 2012 15:07:34 +0100 Subject: regulatory: remove handling of channel bandwidth The channel bandwidth handling isn't really quite right, it assumes that a 40 MHz channel is really two 20 MHz channels, which isn't strictly true. This is the way the regulatory database handling is defined right now though so remove the logic to handle other channel widths. Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/regd.c | 7 ++-- drivers/net/wireless/brcm80211/brcmsmac/channel.c | 2 +- drivers/net/wireless/rtlwifi/regd.c | 9 ++--- include/net/cfg80211.h | 8 +---- net/wireless/reg.c | 44 ++++++++--------------- 5 files changed, 21 insertions(+), 49 deletions(-) diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index d81698015bf7..8ae58c404c67 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -195,7 +195,6 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule; struct ieee80211_channel *ch; unsigned int i; - u32 bandwidth = 0; int r; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { @@ -216,7 +215,6 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy, if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { r = freq_reg_info(wiphy, ch->center_freq, - bandwidth, ®_rule); if (r) continue; @@ -254,7 +252,6 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; const struct ieee80211_reg_rule *reg_rule; - u32 bandwidth = 0; int r; sband = wiphy->bands[IEEE80211_BAND_2GHZ]; @@ -283,7 +280,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, */ ch = &sband->channels[11]; /* CH 12 */ - r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, ®_rule); if (!r) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) @@ -291,7 +288,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, } ch = &sband->channels[12]; /* CH 13 */ - r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, ®_rule); if (!r) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index a90b72202ec5..30272519d795 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -686,7 +686,7 @@ brcms_reg_apply_beaconing_flags(struct wiphy *wiphy, if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { ret = freq_reg_info(wiphy, ch->center_freq, - 0, &rule); + &rule); if (ret) continue; diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c index c1608cddc529..be55dc9167f0 100644 --- a/drivers/net/wireless/rtlwifi/regd.c +++ b/drivers/net/wireless/rtlwifi/regd.c @@ -158,7 +158,6 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule; struct ieee80211_channel *ch; unsigned int i; - u32 bandwidth = 0; int r; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { @@ -174,8 +173,7 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy, (ch->flags & IEEE80211_CHAN_RADAR)) continue; if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { - r = freq_reg_info(wiphy, ch->center_freq, - bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, ®_rule); if (r) continue; @@ -211,7 +209,6 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; const struct ieee80211_reg_rule *reg_rule; - u32 bandwidth = 0; int r; if (!wiphy->bands[IEEE80211_BAND_2GHZ]) @@ -240,7 +237,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, */ ch = &sband->channels[11]; /* CH 12 */ - r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, ®_rule); if (!r) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) @@ -248,7 +245,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, } ch = &sband->channels[12]; /* CH 13 */ - r = freq_reg_info(wiphy, ch->center_freq, bandwidth, ®_rule); + r = freq_reg_info(wiphy, ch->center_freq, ®_rule); if (!r) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8e6a6b73b9c9..c222e5fbf53a 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2938,10 +2938,6 @@ extern void wiphy_apply_custom_regulatory( * freq_reg_info - get regulatory information for the given frequency * @wiphy: the wiphy for which we want to process this rule for * @center_freq: Frequency in KHz for which we want regulatory information for - * @desired_bw_khz: the desired max bandwidth you want to use per - * channel. Note that this is still 20 MHz if you want to use HT40 - * as HT40 makes use of two channels for its 40 MHz width bandwidth. - * If set to 0 we'll assume you want the standard 20 MHz. * @reg_rule: the regulatory rule which we have for this frequency * * Use this function to get the regulatory rule for a specific frequency on @@ -2956,9 +2952,7 @@ extern void wiphy_apply_custom_regulatory( * freq_in_rule_band() for our current definition of a band -- this is purely * subjective and right now its 802.11 specific. */ -extern int freq_reg_info(struct wiphy *wiphy, - u32 center_freq, - u32 desired_bw_khz, +extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_reg_rule **reg_rule); /* diff --git a/net/wireless/reg.c b/net/wireless/reg.c index b3f94c957d1d..2e38b47939a3 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -480,8 +480,7 @@ static bool is_valid_rd(const struct ieee80211_regdomain *rd) } static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range, - u32 center_freq_khz, - u32 bw_khz) + u32 center_freq_khz, u32 bw_khz) { u32 start_freq_khz, end_freq_khz; @@ -682,9 +681,7 @@ static u32 map_regdom_flags(u32 rd_flags) return channel_flags; } -static int freq_reg_info_regd(struct wiphy *wiphy, - u32 center_freq, - u32 desired_bw_khz, +static int freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_reg_rule **reg_rule, const struct ieee80211_regdomain *regd) { @@ -692,9 +689,6 @@ static int freq_reg_info_regd(struct wiphy *wiphy, bool band_rule_found = false; bool bw_fits = false; - if (!desired_bw_khz) - desired_bw_khz = MHZ_TO_KHZ(20); - if (!regd) return -EINVAL; @@ -713,7 +707,7 @@ static int freq_reg_info_regd(struct wiphy *wiphy, if (!band_rule_found) band_rule_found = freq_in_rule_band(fr, center_freq); - bw_fits = reg_does_bw_fit(fr, center_freq, desired_bw_khz); + bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20)); if (band_rule_found && bw_fits) { *reg_rule = rr; @@ -727,7 +721,7 @@ static int freq_reg_info_regd(struct wiphy *wiphy, return -EINVAL; } -int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 desired_bw_khz, +int freq_reg_info(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_reg_rule **reg_rule) { const struct ieee80211_regdomain *regd; @@ -746,8 +740,7 @@ int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 desired_bw_khz, else regd = cfg80211_regdomain; - return freq_reg_info_regd(wiphy, center_freq, desired_bw_khz, - reg_rule, regd); + return freq_reg_info_regd(wiphy, center_freq, reg_rule, regd); } EXPORT_SYMBOL(freq_reg_info); @@ -770,7 +763,6 @@ static const char *reg_initiator_name(enum nl80211_reg_initiator initiator) } static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, - u32 desired_bw_khz, const struct ieee80211_reg_rule *reg_rule) { const struct ieee80211_power_rule *power_rule; @@ -785,8 +777,8 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, else snprintf(max_antenna_gain, 32, "%d", power_rule->max_antenna_gain); - REG_DBG_PRINT("Updating information on frequency %d MHz for a %d MHz width channel with regulatory rule:\n", - chan->center_freq, KHZ_TO_MHZ(desired_bw_khz)); + REG_DBG_PRINT("Updating information on frequency %d MHz with regulatory rule:\n", + chan->center_freq); REG_DBG_PRINT("%d KHz - %d KHz @ %d KHz), (%s mBi, %d mBm)\n", freq_range->start_freq_khz, freq_range->end_freq_khz, @@ -795,7 +787,6 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, } #else static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, - u32 desired_bw_khz, const struct ieee80211_reg_rule *reg_rule) { return; @@ -805,11 +796,7 @@ static void chan_reg_rule_print_dbg(struct ieee80211_channel *chan, /* * Note that right now we assume the desired channel bandwidth * is always 20 MHz for each individual channel (HT40 uses 20 MHz - * per channel, the primary and the extension channel). To support - * smaller custom bandwidths such as 5 MHz or 10 MHz we'll need a - * new ieee80211_channel.target_bw and re run the regulatory check - * on the wiphy with the target_bw specified. Then we can simply use - * that below for the desired_bw_khz below. + * per channel, the primary and the extension channel). */ static void handle_channel(struct wiphy *wiphy, enum nl80211_reg_initiator initiator, @@ -817,7 +804,6 @@ static void handle_channel(struct wiphy *wiphy, { int r; u32 flags, bw_flags = 0; - u32 desired_bw_khz = MHZ_TO_KHZ(20); const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; @@ -829,8 +815,7 @@ static void handle_channel(struct wiphy *wiphy, flags = chan->orig_flags; - r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), - desired_bw_khz, ®_rule); + r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), ®_rule); if (r) { /* * We will disable all channels that do not match our @@ -851,7 +836,7 @@ static void handle_channel(struct wiphy *wiphy, return; } - chan_reg_rule_print_dbg(chan, desired_bw_khz, reg_rule); + chan_reg_rule_print_dbg(chan, reg_rule); power_rule = ®_rule->power_rule; freq_range = ®_rule->freq_range; @@ -1223,23 +1208,22 @@ static void handle_channel_custom(struct wiphy *wiphy, const struct ieee80211_regdomain *regd) { int r; - u32 desired_bw_khz = MHZ_TO_KHZ(20); u32 bw_flags = 0; const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), - desired_bw_khz, ®_rule, regd); + ®_rule, regd); if (r) { - REG_DBG_PRINT("Disabling freq %d MHz as custom regd has no rule that fits a %d MHz wide channel\n", - chan->center_freq, KHZ_TO_MHZ(desired_bw_khz)); + REG_DBG_PRINT("Disabling freq %d MHz as custom regd has no rule that fits it\n", + chan->center_freq); chan->flags = IEEE80211_CHAN_DISABLED; return; } - chan_reg_rule_print_dbg(chan, desired_bw_khz, reg_rule); + chan_reg_rule_print_dbg(chan, reg_rule); power_rule = ®_rule->power_rule; freq_range = ®_rule->freq_range; -- cgit v1.2.3 From 379b82f4c9dc6e67bf61aa61b096c06a2f320f60 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 15:44:07 +0100 Subject: regulatory: pass new regdomain to reset function Instead of assigning after calling the function do it inside the function. This will later avoid a period of time where the pointer is NULL. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 26 +++++++++++--------------- 1 file changed, 11 insertions(+), 15 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2e38b47939a3..35541d6d4145 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -183,7 +183,8 @@ static char user_alpha2[2]; module_param(ieee80211_regdom, charp, 0444); MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); -static void reset_regdomains(bool full_reset) +static void reset_regdomains(bool full_reset, + const struct ieee80211_regdomain *new_regdom) { assert_cfg80211_lock(); assert_reg_lock(); @@ -200,7 +201,7 @@ static void reset_regdomains(bool full_reset) kfree(cfg80211_world_regdom); cfg80211_world_regdom = &world_regdom; - cfg80211_regdomain = NULL; + cfg80211_regdomain = new_regdom; if (!full_reset) return; @@ -221,10 +222,9 @@ static void update_world_regdomain(const struct ieee80211_regdomain *rd) assert_cfg80211_lock(); assert_reg_lock(); - reset_regdomains(false); + reset_regdomains(false, rd); cfg80211_world_regdom = rd; - cfg80211_regdomain = rd; } bool is_world_regdom(const char *alpha2) @@ -1817,7 +1817,7 @@ static void restore_regulatory_settings(bool reset_user) mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(true); + reset_regdomains(true, cfg80211_world_regdom); restore_alpha2(alpha2, reset_user); /* @@ -1848,9 +1848,8 @@ static void restore_regulatory_settings(bool reset_user) } /* First restore to the basic regulatory settings */ - cfg80211_regdomain = cfg80211_world_regdom; - world_alpha2[0] = cfg80211_regdomain->alpha2[0]; - world_alpha2[1] = cfg80211_regdomain->alpha2[1]; + world_alpha2[0] = cfg80211_world_regdom->alpha2[0]; + world_alpha2[1] = cfg80211_world_regdom->alpha2[1]; list_for_each_entry(rdev, &cfg80211_rdev_list, list) { if (rdev->wiphy.flags & WIPHY_FLAG_CUSTOM_REGULATORY) @@ -2101,8 +2100,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (!last_request->intersect) { if (last_request->initiator != NL80211_REGDOM_SET_BY_DRIVER) { - reset_regdomains(false); - cfg80211_regdomain = rd; + reset_regdomains(false, rd); return 0; } @@ -2123,8 +2121,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) return PTR_ERR(regd); request_wiphy->regd = regd; - reset_regdomains(false); - cfg80211_regdomain = rd; + reset_regdomains(false, rd); return 0; } @@ -2147,8 +2144,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) rd = NULL; - reset_regdomains(false); - cfg80211_regdomain = intersected_rd; + reset_regdomains(false, intersected_rd); return 0; } @@ -2319,7 +2315,7 @@ void regulatory_exit(void) /* Lock to suppress warnings */ mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(true); + reset_regdomains(true, NULL); mutex_unlock(&cfg80211_mutex); mutex_unlock(®_mutex); -- cgit v1.2.3 From 458f4f9e960b9a3b674c4b87d996eef186b1fe83 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 15:47:38 +0100 Subject: regulatory: use RCU to protect global and wiphy regdomains To simplify the locking and not require cfg80211_mutex (which nl80211 uses to access the global regdomain) and also to make it possible for drivers to access their wiphy->regd safely, use RCU to protect these pointers. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 +- include/net/regulatory.h | 2 + net/wireless/nl80211.c | 35 ++++++++------- net/wireless/reg.c | 113 +++++++++++++++++++++++++++-------------------- net/wireless/reg.h | 2 +- 5 files changed, 88 insertions(+), 66 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index c222e5fbf53a..f3be58a29642 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2369,7 +2369,7 @@ struct wiphy { /* fields below are read-only, assigned by cfg80211 */ - const struct ieee80211_regdomain *regd; + const struct ieee80211_regdomain __rcu *regd; /* the item in /sys/class/ieee80211/ points to this, * you need use set_wiphy_dev() (see below) */ diff --git a/include/net/regulatory.h b/include/net/regulatory.h index 7dcaa2794fde..96b0f07cb85b 100644 --- a/include/net/regulatory.h +++ b/include/net/regulatory.h @@ -18,6 +18,7 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ +#include /** * enum environment_cap - Environment parsed from country IE @@ -101,6 +102,7 @@ struct ieee80211_reg_rule { }; struct ieee80211_regdomain { + struct rcu_head rcu_head; u32 n_reg_rules; char alpha2[2]; u8 dfs_region; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b387deaf1132..b3cf7cc0d4a1 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3787,12 +3787,8 @@ static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info) * window between nl80211_init() and regulatory_init(), if that is * even possible. */ - mutex_lock(&cfg80211_mutex); - if (unlikely(!cfg80211_regdomain)) { - mutex_unlock(&cfg80211_mutex); + if (unlikely(!rcu_access_pointer(cfg80211_regdomain))) return -EINPROGRESS; - } - mutex_unlock(&cfg80211_mutex); if (!info->attrs[NL80211_ATTR_REG_ALPHA2]) return -EINVAL; @@ -4152,6 +4148,7 @@ static int nl80211_update_mesh_config(struct sk_buff *skb, static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) { + const struct ieee80211_regdomain *regdom; struct sk_buff *msg; void *hdr = NULL; struct nlattr *nl_reg_rules; @@ -4174,35 +4171,36 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) if (!hdr) goto put_failure; - if (nla_put_string(msg, NL80211_ATTR_REG_ALPHA2, - cfg80211_regdomain->alpha2) || - (cfg80211_regdomain->dfs_region && - nla_put_u8(msg, NL80211_ATTR_DFS_REGION, - cfg80211_regdomain->dfs_region))) - goto nla_put_failure; - if (reg_last_request_cell_base() && nla_put_u32(msg, NL80211_ATTR_USER_REG_HINT_TYPE, NL80211_USER_REG_HINT_CELL_BASE)) goto nla_put_failure; + rcu_read_lock(); + regdom = rcu_dereference(cfg80211_regdomain); + + if (nla_put_string(msg, NL80211_ATTR_REG_ALPHA2, regdom->alpha2) || + (regdom->dfs_region && + nla_put_u8(msg, NL80211_ATTR_DFS_REGION, regdom->dfs_region))) + goto nla_put_failure_rcu; + nl_reg_rules = nla_nest_start(msg, NL80211_ATTR_REG_RULES); if (!nl_reg_rules) - goto nla_put_failure; + goto nla_put_failure_rcu; - for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) { + for (i = 0; i < regdom->n_reg_rules; i++) { struct nlattr *nl_reg_rule; const struct ieee80211_reg_rule *reg_rule; const struct ieee80211_freq_range *freq_range; const struct ieee80211_power_rule *power_rule; - reg_rule = &cfg80211_regdomain->reg_rules[i]; + reg_rule = ®dom->reg_rules[i]; freq_range = ®_rule->freq_range; power_rule = ®_rule->power_rule; nl_reg_rule = nla_nest_start(msg, i); if (!nl_reg_rule) - goto nla_put_failure; + goto nla_put_failure_rcu; if (nla_put_u32(msg, NL80211_ATTR_REG_RULE_FLAGS, reg_rule->flags) || @@ -4216,10 +4214,11 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) power_rule->max_antenna_gain) || nla_put_u32(msg, NL80211_ATTR_POWER_RULE_MAX_EIRP, power_rule->max_eirp)) - goto nla_put_failure; + goto nla_put_failure_rcu; nla_nest_end(msg, nl_reg_rule); } + rcu_read_unlock(); nla_nest_end(msg, nl_reg_rules); @@ -4227,6 +4226,8 @@ static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info) err = genlmsg_reply(msg, info); goto out; +nla_put_failure_rcu: + rcu_read_unlock(); nla_put_failure: genlmsg_cancel(msg, hdr); put_failure: diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 35541d6d4145..9b64b201cdf1 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -95,15 +95,15 @@ static struct device_type reg_device_type = { * Central wireless core regulatory domains, we only need two, * the current one and a world regulatory domain in case we have no * information to give us an alpha2. - * Protected by the cfg80211_mutex. */ -const struct ieee80211_regdomain *cfg80211_regdomain; +const struct ieee80211_regdomain __rcu *cfg80211_regdomain; /* * Protects static reg.c components: - * - cfg80211_world_regdom - * - last_request - * - reg_num_devs_support_basehint + * - cfg80211_regdomain (if not used with RCU) + * - cfg80211_world_regdom + * - last_request + * - reg_num_devs_support_basehint */ static DEFINE_MUTEX(reg_mutex); @@ -118,6 +118,25 @@ static inline void assert_reg_lock(void) lockdep_assert_held(®_mutex); } +static const struct ieee80211_regdomain *get_cfg80211_regdom(void) +{ + return rcu_dereference_protected(cfg80211_regdomain, + lockdep_is_held(®_mutex)); +} + +static const struct ieee80211_regdomain *get_wiphy_regdom(struct wiphy *wiphy) +{ + return rcu_dereference_protected(wiphy->regd, + lockdep_is_held(®_mutex)); +} + +static void rcu_free_regdom(const struct ieee80211_regdomain *r) +{ + if (!r) + return; + kfree_rcu((struct ieee80211_regdomain *)r, rcu_head); +} + /* Used to queue up regulatory hints */ static LIST_HEAD(reg_requests_list); static spinlock_t reg_requests_lock; @@ -186,22 +205,25 @@ MODULE_PARM_DESC(ieee80211_regdom, "IEEE 802.11 regulatory domain code"); static void reset_regdomains(bool full_reset, const struct ieee80211_regdomain *new_regdom) { - assert_cfg80211_lock(); + const struct ieee80211_regdomain *r; + assert_reg_lock(); + r = get_cfg80211_regdom(); + /* avoid freeing static information or freeing something twice */ - if (cfg80211_regdomain == cfg80211_world_regdom) - cfg80211_regdomain = NULL; + if (r == cfg80211_world_regdom) + r = NULL; if (cfg80211_world_regdom == &world_regdom) cfg80211_world_regdom = NULL; - if (cfg80211_regdomain == &world_regdom) - cfg80211_regdomain = NULL; + if (r == &world_regdom) + r = NULL; - kfree(cfg80211_regdomain); - kfree(cfg80211_world_regdom); + rcu_free_regdom(r); + rcu_free_regdom(cfg80211_world_regdom); cfg80211_world_regdom = &world_regdom; - cfg80211_regdomain = new_regdom; + rcu_assign_pointer(cfg80211_regdomain, new_regdom); if (!full_reset) return; @@ -219,7 +241,6 @@ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { WARN_ON(!last_request); - assert_cfg80211_lock(); assert_reg_lock(); reset_regdomains(false, rd); @@ -280,11 +301,11 @@ static bool alpha2_equal(const char *alpha2_x, const char *alpha2_y) static bool regdom_changes(const char *alpha2) { - assert_cfg80211_lock(); + const struct ieee80211_regdomain *r = get_cfg80211_regdom(); - if (!cfg80211_regdomain) + if (!r) return true; - return !alpha2_equal(cfg80211_regdomain->alpha2, alpha2); + return !alpha2_equal(r->alpha2, alpha2); } /* @@ -727,7 +748,6 @@ int freq_reg_info(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_regdomain *regd; assert_reg_lock(); - assert_cfg80211_lock(); /* * Follow the driver's regulatory domain, if present, unless a country @@ -736,9 +756,9 @@ int freq_reg_info(struct wiphy *wiphy, u32 center_freq, if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && last_request->initiator != NL80211_REGDOM_SET_BY_USER && wiphy->regd) - regd = wiphy->regd; + regd = get_wiphy_regdom(wiphy); else - regd = cfg80211_regdomain; + regd = get_cfg80211_regdom(); return freq_reg_info_regd(wiphy, center_freq, reg_rule, regd); } @@ -809,8 +829,6 @@ static void handle_channel(struct wiphy *wiphy, const struct ieee80211_freq_range *freq_range = NULL; struct wiphy *request_wiphy = NULL; - assert_cfg80211_lock(); - request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); flags = chan->orig_flags; @@ -1060,15 +1078,17 @@ static void wiphy_update_beacon_reg(struct wiphy *wiphy) static bool reg_is_world_roaming(struct wiphy *wiphy) { - assert_cfg80211_lock(); + const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); + const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); - if (is_world_regdom(cfg80211_regdomain->alpha2) || - (wiphy->regd && is_world_regdom(wiphy->regd->alpha2))) + if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) return true; + if (last_request && last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) return true; + return false; } @@ -1165,13 +1185,12 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, { enum ieee80211_band band; - assert_cfg80211_lock(); assert_reg_lock(); if (ignore_reg_update(wiphy, initiator)) return; - last_request->dfs_region = cfg80211_regdomain->dfs_region; + last_request->dfs_region = get_cfg80211_regdom()->dfs_region; for (band = 0; band < IEEE80211_NUM_BANDS; band++) handle_band(wiphy, initiator, wiphy->bands[band]); @@ -1188,6 +1207,8 @@ static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) struct cfg80211_registered_device *rdev; struct wiphy *wiphy; + assert_cfg80211_lock(); + list_for_each_entry(rdev, &cfg80211_rdev_list, list) { wiphy = &rdev->wiphy; wiphy_update_regulatory(wiphy, initiator); @@ -1402,7 +1423,7 @@ static void reg_set_request_processed(void) * * Returns one of the different reg request treatment values. * - * Caller must hold &cfg80211_mutex and ®_mutex + * Caller must hold ®_mutex */ static enum reg_request_treatment __regulatory_hint(struct wiphy *wiphy, @@ -1412,20 +1433,18 @@ __regulatory_hint(struct wiphy *wiphy, bool intersect = false; enum reg_request_treatment treatment; - assert_cfg80211_lock(); - treatment = get_reg_request_treatment(wiphy, pending_request); switch (treatment) { case REG_REQ_INTERSECT: if (pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { - regd = reg_copy_regd(cfg80211_regdomain); + regd = reg_copy_regd(get_cfg80211_regdom()); if (IS_ERR(regd)) { kfree(pending_request); return PTR_ERR(regd); } - wiphy->regd = regd; + rcu_assign_pointer(wiphy->regd, regd); } intersect = true; break; @@ -1439,13 +1458,13 @@ __regulatory_hint(struct wiphy *wiphy, */ if (treatment == REG_REQ_ALREADY_SET && pending_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) { - regd = reg_copy_regd(cfg80211_regdomain); + regd = reg_copy_regd(get_cfg80211_regdom()); if (IS_ERR(regd)) { kfree(pending_request); return REG_REQ_IGNORE; } treatment = REG_REQ_ALREADY_SET; - wiphy->regd = regd; + rcu_assign_pointer(wiphy->regd, regd); goto new_request; } kfree(pending_request); @@ -2051,6 +2070,8 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* Some basic sanity checks first */ + assert_reg_lock(); + if (!reg_is_valid_request(rd->alpha2)) return -EINVAL; @@ -2120,7 +2141,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) if (IS_ERR(regd)) return PTR_ERR(regd); - request_wiphy->regd = regd; + rcu_assign_pointer(request_wiphy->regd, regd); reset_regdomains(false, rd); return 0; } @@ -2128,7 +2149,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* Intersection requires a bit more work */ if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { - intersected_rd = regdom_intersect(rd, cfg80211_regdomain); + intersected_rd = regdom_intersect(rd, get_cfg80211_regdom()); if (!intersected_rd) return -EINVAL; @@ -2138,7 +2159,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * domain we keep it for its private use */ if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) - request_wiphy->regd = rd; + rcu_assign_pointer(request_wiphy->regd, rd); else kfree(rd); @@ -2156,14 +2177,12 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* * Use this call to set the current regulatory domain. Conflicts with * multiple drivers can be ironed out later. Caller must've already - * kmalloc'd the rd structure. Caller must hold cfg80211_mutex + * kmalloc'd the rd structure. */ int set_regdom(const struct ieee80211_regdomain *rd) { int r; - assert_cfg80211_lock(); - mutex_lock(®_mutex); /* Note that this doesn't update the wiphys, this is done below */ @@ -2177,7 +2196,8 @@ int set_regdom(const struct ieee80211_regdomain *rd) } /* This would make this whole thing pointless */ - if (WARN_ON(!last_request->intersect && rd != cfg80211_regdomain)) { + if (WARN_ON(!last_request->intersect && + rd != get_cfg80211_regdom())) { r = -EINVAL; goto out; } @@ -2185,7 +2205,7 @@ int set_regdom(const struct ieee80211_regdomain *rd) /* update all wiphys now with the new established regulatory domain */ update_all_wiphy_regulatory(last_request->initiator); - print_regdomain(cfg80211_regdomain); + print_regdomain(get_cfg80211_regdom()); nl80211_send_reg_change_event(last_request); @@ -2238,7 +2258,8 @@ void wiphy_regulatory_deregister(struct wiphy *wiphy) if (!reg_dev_ignore_cell_hint(wiphy)) reg_num_devs_support_basehint--; - kfree(wiphy->regd); + rcu_free_regdom(get_wiphy_regdom(wiphy)); + rcu_assign_pointer(wiphy->regd, NULL); if (last_request) request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); @@ -2273,13 +2294,13 @@ int __init regulatory_init(void) reg_regdb_size_check(); - cfg80211_regdomain = cfg80211_world_regdom; + rcu_assign_pointer(cfg80211_regdomain, cfg80211_world_regdom); user_alpha2[0] = '9'; user_alpha2[1] = '7'; /* We always try to get an update for the static regdomain */ - err = regulatory_hint_core(cfg80211_regdomain->alpha2); + err = regulatory_hint_core(cfg80211_world_regdom->alpha2); if (err) { if (err == -ENOMEM) return err; @@ -2313,10 +2334,8 @@ void regulatory_exit(void) cancel_delayed_work_sync(®_timeout); /* Lock to suppress warnings */ - mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); reset_regdomains(true, NULL); - mutex_unlock(&cfg80211_mutex); mutex_unlock(®_mutex); dev_set_uevent_suppress(®_pdev->dev, true); diff --git a/net/wireless/reg.h b/net/wireless/reg.h index d391b50d2829..af2d5f8a5d82 100644 --- a/net/wireless/reg.h +++ b/net/wireless/reg.h @@ -16,7 +16,7 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -extern const struct ieee80211_regdomain *cfg80211_regdomain; +extern const struct ieee80211_regdomain __rcu *cfg80211_regdomain; bool is_world_regdom(const char *alpha2); bool reg_supported_dfs_region(u8 dfs_region); -- cgit v1.2.3 From c492db370c17c428a0a58d3673294d4e99634b7d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 16:29:25 +0100 Subject: regulatory: use RCU to protect last_request This will allow making freq_reg_info() lock-free. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- include/net/regulatory.h | 2 + net/wireless/reg.c | 199 ++++++++++++++++++++++++++--------------------- 2 files changed, 111 insertions(+), 90 deletions(-) diff --git a/include/net/regulatory.h b/include/net/regulatory.h index 96b0f07cb85b..f17ed590d64a 100644 --- a/include/net/regulatory.h +++ b/include/net/regulatory.h @@ -36,6 +36,7 @@ enum environment_cap { /** * struct regulatory_request - used to keep track of regulatory requests * + * @rcu_head: RCU head struct used to free the request * @wiphy_idx: this is set if this request's initiator is * %REGDOM_SET_BY_COUNTRY_IE or %REGDOM_SET_BY_DRIVER. This * can be used by the wireless core to deal with conflicts @@ -73,6 +74,7 @@ enum environment_cap { * @list: used to insert into the reg_requests_list linked list */ struct regulatory_request { + struct rcu_head rcu_head; int wiphy_idx; enum nl80211_reg_initiator initiator; enum nl80211_user_reg_hint_type user_reg_hint_type; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 9b64b201cdf1..2a7c3adf902f 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -82,7 +82,8 @@ static struct regulatory_request core_request_world = { }; /* Receipt of information from last regulatory request */ -static struct regulatory_request *last_request = &core_request_world; +static struct regulatory_request __rcu *last_request = + (void __rcu *)&core_request_world; /* To trigger userspace events */ static struct platform_device *reg_pdev; @@ -102,7 +103,7 @@ const struct ieee80211_regdomain __rcu *cfg80211_regdomain; * Protects static reg.c components: * - cfg80211_regdomain (if not used with RCU) * - cfg80211_world_regdom - * - last_request + * - last_request (if not used with RCU) * - reg_num_devs_support_basehint */ static DEFINE_MUTEX(reg_mutex); @@ -137,6 +138,12 @@ static void rcu_free_regdom(const struct ieee80211_regdomain *r) kfree_rcu((struct ieee80211_regdomain *)r, rcu_head); } +static struct regulatory_request *get_last_request(void) +{ + return rcu_dereference_protected(last_request, + lockdep_is_held(®_mutex)); +} + /* Used to queue up regulatory hints */ static LIST_HEAD(reg_requests_list); static spinlock_t reg_requests_lock; @@ -206,6 +213,7 @@ static void reset_regdomains(bool full_reset, const struct ieee80211_regdomain *new_regdom) { const struct ieee80211_regdomain *r; + struct regulatory_request *lr; assert_reg_lock(); @@ -228,9 +236,10 @@ static void reset_regdomains(bool full_reset, if (!full_reset) return; - if (last_request != &core_request_world) - kfree(last_request); - last_request = &core_request_world; + lr = get_last_request(); + if (lr != &core_request_world && lr) + kfree_rcu(lr, rcu_head); + rcu_assign_pointer(last_request, &core_request_world); } /* @@ -239,9 +248,11 @@ static void reset_regdomains(bool full_reset, */ static void update_world_regdomain(const struct ieee80211_regdomain *rd) { - WARN_ON(!last_request); + struct regulatory_request *lr; - assert_reg_lock(); + lr = get_last_request(); + + WARN_ON(!lr); reset_regdomains(false, rd); @@ -448,15 +459,12 @@ static int call_crda(const char *alpha2) static bool reg_is_valid_request(const char *alpha2) { - assert_reg_lock(); + struct regulatory_request *lr = get_last_request(); - if (!last_request) + if (!lr || lr->processed) return false; - if (last_request->processed) - return false; - - return alpha2_equal(last_request->alpha2, alpha2); + return alpha2_equal(lr->alpha2, alpha2); } /* Sanity check on a regulatory rule */ @@ -746,15 +754,14 @@ int freq_reg_info(struct wiphy *wiphy, u32 center_freq, const struct ieee80211_reg_rule **reg_rule) { const struct ieee80211_regdomain *regd; - - assert_reg_lock(); + struct regulatory_request *lr = get_last_request(); /* * Follow the driver's regulatory domain, if present, unless a country * IE has been processed or a user wants to help complaince further */ - if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && - last_request->initiator != NL80211_REGDOM_SET_BY_USER && + if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + lr->initiator != NL80211_REGDOM_SET_BY_USER && wiphy->regd) regd = get_wiphy_regdom(wiphy); else @@ -828,8 +835,9 @@ static void handle_channel(struct wiphy *wiphy, const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; struct wiphy *request_wiphy = NULL; + struct regulatory_request *lr = get_last_request(); - request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); flags = chan->orig_flags; @@ -862,7 +870,7 @@ static void handle_channel(struct wiphy *wiphy, if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) bw_flags = IEEE80211_CHAN_NO_HT40; - if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && request_wiphy && request_wiphy == wiphy && request_wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) { /* @@ -927,7 +935,7 @@ bool reg_last_request_cell_base(void) bool val; mutex_lock(®_mutex); - val = reg_request_cell_base(last_request); + val = reg_request_cell_base(get_last_request()); mutex_unlock(®_mutex); return val; @@ -938,10 +946,12 @@ bool reg_last_request_cell_base(void) static enum reg_request_treatment reg_ignore_cell_hint(struct regulatory_request *pending_request) { + struct regulatory_request *lr = get_last_request(); + if (!reg_num_devs_support_basehint) return REG_REQ_IGNORE; - if (reg_request_cell_base(last_request) && + if (reg_request_cell_base(lr) && !regdom_changes(pending_request->alpha2)) return REG_REQ_ALREADY_SET; @@ -969,7 +979,9 @@ static bool reg_dev_ignore_cell_hint(struct wiphy *wiphy) static bool ignore_reg_update(struct wiphy *wiphy, enum nl80211_reg_initiator initiator) { - if (!last_request) { + struct regulatory_request *lr = get_last_request(); + + if (!lr) { REG_DBG_PRINT("Ignoring regulatory request %s since last_request is not set\n", reg_initiator_name(initiator)); return true; @@ -988,13 +1000,13 @@ static bool ignore_reg_update(struct wiphy *wiphy, */ if (wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY && !wiphy->regd && initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && - !is_world_regdom(last_request->alpha2)) { + !is_world_regdom(lr->alpha2)) { REG_DBG_PRINT("Ignoring regulatory request %s since the driver requires its own regulatory domain to be set first\n", reg_initiator_name(initiator)); return true; } - if (reg_request_cell_base(last_request)) + if (reg_request_cell_base(lr)) return reg_dev_ignore_cell_hint(wiphy); return false; @@ -1080,12 +1092,12 @@ static bool reg_is_world_roaming(struct wiphy *wiphy) { const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); + struct regulatory_request *lr = get_last_request(); if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) return true; - if (last_request && - last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) return true; @@ -1184,13 +1196,12 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, enum nl80211_reg_initiator initiator) { enum ieee80211_band band; - - assert_reg_lock(); + struct regulatory_request *lr = get_last_request(); if (ignore_reg_update(wiphy, initiator)) return; - last_request->dfs_region = get_cfg80211_regdom()->dfs_region; + lr->dfs_region = get_cfg80211_regdom()->dfs_region; for (band = 0; band < IEEE80211_NUM_BANDS; band++) handle_band(wiphy, initiator, wiphy->bands[band]); @@ -1199,7 +1210,7 @@ static void wiphy_update_regulatory(struct wiphy *wiphy, reg_process_ht_flags(wiphy); if (wiphy->reg_notifier) - wiphy->reg_notifier(wiphy, last_request); + wiphy->reg_notifier(wiphy, lr); } static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) @@ -1220,7 +1231,7 @@ static void update_all_wiphy_regulatory(enum nl80211_reg_initiator initiator) if (initiator == NL80211_REGDOM_SET_BY_CORE && wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY && wiphy->reg_notifier) - wiphy->reg_notifier(wiphy, last_request); + wiphy->reg_notifier(wiphy, get_last_request()); } } @@ -1300,28 +1311,28 @@ get_reg_request_treatment(struct wiphy *wiphy, struct regulatory_request *pending_request) { struct wiphy *last_wiphy = NULL; + struct regulatory_request *lr = get_last_request(); /* All initial requests are respected */ - if (!last_request) + if (!lr) return REG_REQ_OK; switch (pending_request->initiator) { case NL80211_REGDOM_SET_BY_CORE: return REG_REQ_OK; case NL80211_REGDOM_SET_BY_COUNTRY_IE: - if (reg_request_cell_base(last_request)) { + if (reg_request_cell_base(lr)) { /* Trust a Cell base station over the AP's country IE */ if (regdom_changes(pending_request->alpha2)) return REG_REQ_IGNORE; return REG_REQ_ALREADY_SET; } - last_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + last_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); if (unlikely(!is_an_alpha2(pending_request->alpha2))) return -EINVAL; - if (last_request->initiator == - NL80211_REGDOM_SET_BY_COUNTRY_IE) { + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { if (last_wiphy != wiphy) { /* * Two cards with two APs claiming different @@ -1343,7 +1354,7 @@ get_reg_request_treatment(struct wiphy *wiphy, } return 0; case NL80211_REGDOM_SET_BY_DRIVER: - if (last_request->initiator == NL80211_REGDOM_SET_BY_CORE) { + if (lr->initiator == NL80211_REGDOM_SET_BY_CORE) { if (regdom_changes(pending_request->alpha2)) return REG_REQ_OK; return REG_REQ_ALREADY_SET; @@ -1354,7 +1365,7 @@ get_reg_request_treatment(struct wiphy *wiphy, * back in or if you add a new device for which the previously * loaded card also agrees on the regulatory domain. */ - if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER && + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && !regdom_changes(pending_request->alpha2)) return REG_REQ_ALREADY_SET; @@ -1363,26 +1374,26 @@ get_reg_request_treatment(struct wiphy *wiphy, if (reg_request_cell_base(pending_request)) return reg_ignore_cell_hint(pending_request); - if (reg_request_cell_base(last_request)) + if (reg_request_cell_base(lr)) return REG_REQ_IGNORE; - if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) return REG_REQ_INTERSECT; /* * If the user knows better the user should set the regdom * to their country before the IE is picked up */ - if (last_request->initiator == NL80211_REGDOM_SET_BY_USER && - last_request->intersect) + if (lr->initiator == NL80211_REGDOM_SET_BY_USER && + lr->intersect) return REG_REQ_IGNORE; /* * Process user requests only after previous user/driver/core * requests have been processed */ - if ((last_request->initiator == NL80211_REGDOM_SET_BY_CORE || - last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || - last_request->initiator == NL80211_REGDOM_SET_BY_USER) && - regdom_changes(last_request->alpha2)) + if ((lr->initiator == NL80211_REGDOM_SET_BY_CORE || + lr->initiator == NL80211_REGDOM_SET_BY_DRIVER || + lr->initiator == NL80211_REGDOM_SET_BY_USER) && + regdom_changes(lr->alpha2)) return REG_REQ_IGNORE; if (!regdom_changes(pending_request->alpha2)) @@ -1397,15 +1408,16 @@ get_reg_request_treatment(struct wiphy *wiphy, static void reg_set_request_processed(void) { bool need_more_processing = false; + struct regulatory_request *lr = get_last_request(); - last_request->processed = true; + lr->processed = true; spin_lock(®_requests_lock); if (!list_empty(®_requests_list)) need_more_processing = true; spin_unlock(®_requests_lock); - if (last_request->initiator == NL80211_REGDOM_SET_BY_USER) + if (lr->initiator == NL80211_REGDOM_SET_BY_USER) cancel_delayed_work(®_timeout); if (need_more_processing) @@ -1432,6 +1444,7 @@ __regulatory_hint(struct wiphy *wiphy, const struct ieee80211_regdomain *regd; bool intersect = false; enum reg_request_treatment treatment; + struct regulatory_request *lr; treatment = get_reg_request_treatment(wiphy, pending_request); @@ -1472,18 +1485,20 @@ __regulatory_hint(struct wiphy *wiphy, } new_request: - if (last_request != &core_request_world) - kfree(last_request); + lr = get_last_request(); + if (lr != &core_request_world && lr) + kfree_rcu(lr, rcu_head); - last_request = pending_request; - last_request->intersect = intersect; - last_request->processed = false; + pending_request->intersect = intersect; + pending_request->processed = false; + rcu_assign_pointer(last_request, pending_request); + lr = pending_request; pending_request = NULL; - if (last_request->initiator == NL80211_REGDOM_SET_BY_USER) { - user_alpha2[0] = last_request->alpha2[0]; - user_alpha2[1] = last_request->alpha2[1]; + if (lr->initiator == NL80211_REGDOM_SET_BY_USER) { + user_alpha2[0] = lr->alpha2[0]; + user_alpha2[1] = lr->alpha2[1]; } /* When r == REG_REQ_INTERSECT we do need to call CRDA */ @@ -1494,13 +1509,13 @@ new_request: * inform userspace we have processed the request */ if (treatment == REG_REQ_ALREADY_SET) { - nl80211_send_reg_change_event(last_request); + nl80211_send_reg_change_event(lr); reg_set_request_processed(); } return treatment; } - if (call_crda(last_request->alpha2)) + if (call_crda(lr->alpha2)) return REG_REQ_IGNORE; return REG_REQ_OK; } @@ -1543,13 +1558,14 @@ static void reg_process_hint(struct regulatory_request *reg_request, */ static void reg_process_pending_hints(void) { - struct regulatory_request *reg_request; + struct regulatory_request *reg_request, *lr; mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); + lr = get_last_request(); /* When last_request->processed becomes true this will be rescheduled */ - if (last_request && !last_request->processed) { + if (lr && !lr->processed) { REG_DBG_PRINT("Pending regulatory request, waiting for it to be processed...\n"); goto out; } @@ -1702,11 +1718,12 @@ void regulatory_hint_11d(struct wiphy *wiphy, enum ieee80211_band band, { char alpha2[2]; enum environment_cap env = ENVIRON_ANY; - struct regulatory_request *request; + struct regulatory_request *request, *lr; mutex_lock(®_mutex); + lr = get_last_request(); - if (unlikely(!last_request)) + if (unlikely(!lr)) goto out; /* IE len must be evenly divisible by 2 */ @@ -1729,8 +1746,8 @@ void regulatory_hint_11d(struct wiphy *wiphy, enum ieee80211_band band, * We leave conflict resolution to the workqueue, where can hold * cfg80211_mutex. */ - if (last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && - last_request->wiphy_idx != WIPHY_IDX_INVALID) + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && + lr->wiphy_idx != WIPHY_IDX_INVALID) goto out; request = kzalloc(sizeof(struct regulatory_request), GFP_KERNEL); @@ -2021,13 +2038,12 @@ static void print_dfs_region(u8 dfs_region) static void print_regdomain(const struct ieee80211_regdomain *rd) { + struct regulatory_request *lr = get_last_request(); if (is_intersected_alpha2(rd->alpha2)) { - if (last_request->initiator == - NL80211_REGDOM_SET_BY_COUNTRY_IE) { + if (lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { struct cfg80211_registered_device *rdev; - rdev = cfg80211_rdev_by_wiphy_idx( - last_request->wiphy_idx); + rdev = cfg80211_rdev_by_wiphy_idx(lr->wiphy_idx); if (rdev) { pr_info("Current regulatory domain updated by AP to: %c%c\n", rdev->country_ie_alpha2[0], @@ -2042,7 +2058,7 @@ static void print_regdomain(const struct ieee80211_regdomain *rd) if (is_unknown_alpha2(rd->alpha2)) pr_info("Regulatory domain changed to driver built-in settings (unknown country)\n"); else { - if (reg_request_cell_base(last_request)) + if (reg_request_cell_base(lr)) pr_info("Regulatory domain changed to country: %c%c by Cell Station\n", rd->alpha2[0], rd->alpha2[1]); else @@ -2067,11 +2083,10 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) const struct ieee80211_regdomain *regd; const struct ieee80211_regdomain *intersected_rd = NULL; struct wiphy *request_wiphy; + struct regulatory_request *lr = get_last_request(); /* Some basic sanity checks first */ - assert_reg_lock(); - if (!reg_is_valid_request(rd->alpha2)) return -EINVAL; @@ -2089,7 +2104,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * rd is non static (it means CRDA was present and was used last) * and the pending request came in from a country IE */ - if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { + if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { /* * If someone else asked us to change the rd lets only bother * checking if the alpha2 changes if CRDA was already called @@ -2111,16 +2126,16 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) return -EINVAL; } - request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); if (!request_wiphy && - (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER || - last_request->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)) { + (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER || + lr->initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE)) { schedule_delayed_work(®_timeout, 0); return -ENODEV; } - if (!last_request->intersect) { - if (last_request->initiator != NL80211_REGDOM_SET_BY_DRIVER) { + if (!lr->intersect) { + if (lr->initiator != NL80211_REGDOM_SET_BY_DRIVER) { reset_regdomains(false, rd); return 0; } @@ -2148,7 +2163,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) /* Intersection requires a bit more work */ - if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { + if (lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE) { intersected_rd = regdom_intersect(rd, get_cfg80211_regdom()); if (!intersected_rd) return -EINVAL; @@ -2158,7 +2173,7 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * However if a driver requested this specific regulatory * domain we keep it for its private use */ - if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER) + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER) rcu_assign_pointer(request_wiphy->regd, rd); else kfree(rd); @@ -2181,9 +2196,11 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) */ int set_regdom(const struct ieee80211_regdomain *rd) { + struct regulatory_request *lr; int r; mutex_lock(®_mutex); + lr = get_last_request(); /* Note that this doesn't update the wiphys, this is done below */ r = __set_regdom(rd); @@ -2196,18 +2213,17 @@ int set_regdom(const struct ieee80211_regdomain *rd) } /* This would make this whole thing pointless */ - if (WARN_ON(!last_request->intersect && - rd != get_cfg80211_regdom())) { + if (WARN_ON(!lr->intersect && rd != get_cfg80211_regdom())) { r = -EINVAL; goto out; } /* update all wiphys now with the new established regulatory domain */ - update_all_wiphy_regulatory(last_request->initiator); + update_all_wiphy_regulatory(lr->initiator); print_regdomain(get_cfg80211_regdom()); - nl80211_send_reg_change_event(last_request); + nl80211_send_reg_change_event(lr); reg_set_request_processed(); @@ -2220,10 +2236,11 @@ int set_regdom(const struct ieee80211_regdomain *rd) #ifdef CONFIG_HOTPLUG int reg_device_uevent(struct device *dev, struct kobj_uevent_env *env) { - if (last_request && !last_request->processed) { + struct regulatory_request *lr = get_last_request(); + + if (lr && !lr->processed) { if (add_uevent_var(env, "COUNTRY=%c%c", - last_request->alpha2[0], - last_request->alpha2[1])) + lr->alpha2[0], lr->alpha2[1])) return -ENOMEM; } @@ -2252,8 +2269,10 @@ void wiphy_regulatory_register(struct wiphy *wiphy) void wiphy_regulatory_deregister(struct wiphy *wiphy) { struct wiphy *request_wiphy = NULL; + struct regulatory_request *lr; mutex_lock(®_mutex); + lr = get_last_request(); if (!reg_dev_ignore_cell_hint(wiphy)) reg_num_devs_support_basehint--; @@ -2261,14 +2280,14 @@ void wiphy_regulatory_deregister(struct wiphy *wiphy) rcu_free_regdom(get_wiphy_regdom(wiphy)); rcu_assign_pointer(wiphy->regd, NULL); - if (last_request) - request_wiphy = wiphy_idx_to_wiphy(last_request->wiphy_idx); + if (lr) + request_wiphy = wiphy_idx_to_wiphy(lr->wiphy_idx); if (!request_wiphy || request_wiphy != wiphy) goto out; - last_request->wiphy_idx = WIPHY_IDX_INVALID; - last_request->country_ie_env = ENVIRON_ANY; + lr->wiphy_idx = WIPHY_IDX_INVALID; + lr->country_ie_env = ENVIRON_ANY; out: mutex_unlock(®_mutex); } -- cgit v1.2.3 From 361c9c8b0eeeec7d881e018d5143bf883558c566 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 6 Dec 2012 15:57:14 +0100 Subject: regulatory: use IS_ERR macro family for freq_reg_info Instead of returning an error and filling a pointer return the pointer and an ERR_PTR value in error cases. Acked-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/regd.c | 16 ++++------ drivers/net/wireless/brcm80211/brcmsmac/channel.c | 7 ++--- drivers/net/wireless/rtlwifi/regd.c | 14 ++++----- include/net/cfg80211.h | 18 +++++------ net/wireless/reg.c | 38 ++++++++++------------- 5 files changed, 41 insertions(+), 52 deletions(-) diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index 8ae58c404c67..7a6c79e1f819 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -195,7 +195,6 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule; struct ieee80211_channel *ch; unsigned int i; - int r; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { @@ -213,10 +212,8 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy, continue; if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { - r = freq_reg_info(wiphy, - ch->center_freq, - ®_rule); - if (r) + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (IS_ERR(reg_rule)) continue; /* * If 11d had a rule for this channel ensure @@ -252,7 +249,6 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; const struct ieee80211_reg_rule *reg_rule; - int r; sband = wiphy->bands[IEEE80211_BAND_2GHZ]; if (!sband) @@ -280,16 +276,16 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy, */ ch = &sband->channels[11]; /* CH 12 */ - r = freq_reg_info(wiphy, ch->center_freq, ®_rule); - if (!r) { + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (!IS_ERR(reg_rule)) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN; } ch = &sband->channels[12]; /* CH 13 */ - r = freq_reg_info(wiphy, ch->center_freq, ®_rule); - if (!r) { + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (!IS_ERR(reg_rule)) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN; diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 30272519d795..4eb3f0d52105 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -670,7 +670,7 @@ brcms_reg_apply_beaconing_flags(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; const struct ieee80211_reg_rule *rule; - int band, i, ret; + int band, i; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { sband = wiphy->bands[band]; @@ -685,9 +685,8 @@ brcms_reg_apply_beaconing_flags(struct wiphy *wiphy, continue; if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { - ret = freq_reg_info(wiphy, ch->center_freq, - &rule); - if (ret) + rule = freq_reg_info(wiphy, ch->center_freq); + if (IS_ERR(rule)) continue; if (!(rule->flags & NL80211_RRF_NO_IBSS)) diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c index be55dc9167f0..7e3ead774fb9 100644 --- a/drivers/net/wireless/rtlwifi/regd.c +++ b/drivers/net/wireless/rtlwifi/regd.c @@ -158,7 +158,6 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy, const struct ieee80211_reg_rule *reg_rule; struct ieee80211_channel *ch; unsigned int i; - int r; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { @@ -173,8 +172,8 @@ static void _rtl_reg_apply_beaconing_flags(struct wiphy *wiphy, (ch->flags & IEEE80211_CHAN_RADAR)) continue; if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) { - r = freq_reg_info(wiphy, ch->center_freq, ®_rule); - if (r) + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (IS_ERR(reg_rule)) continue; /* @@ -209,7 +208,6 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; const struct ieee80211_reg_rule *reg_rule; - int r; if (!wiphy->bands[IEEE80211_BAND_2GHZ]) return; @@ -237,16 +235,16 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy, */ ch = &sband->channels[11]; /* CH 12 */ - r = freq_reg_info(wiphy, ch->center_freq, ®_rule); - if (!r) { + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (!IS_ERR(reg_rule)) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN; } ch = &sband->channels[12]; /* CH 13 */ - r = freq_reg_info(wiphy, ch->center_freq, ®_rule); - if (!r) { + reg_rule = freq_reg_info(wiphy, ch->center_freq); + if (!IS_ERR(reg_rule)) { if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN)) if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN) ch->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f3be58a29642..1f74360b527c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2938,22 +2938,22 @@ extern void wiphy_apply_custom_regulatory( * freq_reg_info - get regulatory information for the given frequency * @wiphy: the wiphy for which we want to process this rule for * @center_freq: Frequency in KHz for which we want regulatory information for - * @reg_rule: the regulatory rule which we have for this frequency * * Use this function to get the regulatory rule for a specific frequency on * a given wireless device. If the device has a specific regulatory domain * it wants to follow we respect that unless a country IE has been received * and processed already. * - * Returns 0 if it was able to find a valid regulatory rule which does - * apply to the given center_freq otherwise it returns non-zero. It will - * also return -ERANGE if we determine the given center_freq does not even have - * a regulatory rule for a frequency range in the center_freq's band. See - * freq_in_rule_band() for our current definition of a band -- this is purely - * subjective and right now its 802.11 specific. + * When an error occurs, for example if no rule can be found, the return value + * is encoded using ERR_PTR(). Use IS_ERR() to check and PTR_ERR() to obtain + * the numeric return value. The numeric return value will be -ERANGE if we + * determine the given center_freq does not even have a regulatory rule for a + * frequency range in the center_freq's band. See freq_in_rule_band() for our + * current definition of a band -- this is purely subjective and right now it's + * 802.11 specific. */ -extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, - const struct ieee80211_reg_rule **reg_rule); +const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, + u32 center_freq); /* * callbacks for asynchronous cfg80211 methods, notification diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2a7c3adf902f..fd53d975c0bc 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -710,16 +710,16 @@ static u32 map_regdom_flags(u32 rd_flags) return channel_flags; } -static int freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, - const struct ieee80211_reg_rule **reg_rule, - const struct ieee80211_regdomain *regd) +static const struct ieee80211_reg_rule * +freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, + const struct ieee80211_regdomain *regd) { int i; bool band_rule_found = false; bool bw_fits = false; if (!regd) - return -EINVAL; + return ERR_PTR(-EINVAL); for (i = 0; i < regd->n_reg_rules; i++) { const struct ieee80211_reg_rule *rr; @@ -738,20 +738,18 @@ static int freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20)); - if (band_rule_found && bw_fits) { - *reg_rule = rr; - return 0; - } + if (band_rule_found && bw_fits) + return rr; } if (!band_rule_found) - return -ERANGE; + return ERR_PTR(-ERANGE); - return -EINVAL; + return ERR_PTR(-EINVAL); } -int freq_reg_info(struct wiphy *wiphy, u32 center_freq, - const struct ieee80211_reg_rule **reg_rule) +const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, + u32 center_freq) { const struct ieee80211_regdomain *regd; struct regulatory_request *lr = get_last_request(); @@ -767,7 +765,7 @@ int freq_reg_info(struct wiphy *wiphy, u32 center_freq, else regd = get_cfg80211_regdom(); - return freq_reg_info_regd(wiphy, center_freq, reg_rule, regd); + return freq_reg_info_regd(wiphy, center_freq, regd); } EXPORT_SYMBOL(freq_reg_info); @@ -829,7 +827,6 @@ static void handle_channel(struct wiphy *wiphy, enum nl80211_reg_initiator initiator, struct ieee80211_channel *chan) { - int r; u32 flags, bw_flags = 0; const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; @@ -841,8 +838,8 @@ static void handle_channel(struct wiphy *wiphy, flags = chan->orig_flags; - r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq), ®_rule); - if (r) { + reg_rule = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq)); + if (IS_ERR(reg_rule)) { /* * We will disable all channels that do not match our * received regulatory rule unless the hint is coming @@ -854,7 +851,7 @@ static void handle_channel(struct wiphy *wiphy, * while 5 GHz is still supported. */ if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && - r == -ERANGE) + PTR_ERR(reg_rule) == -ERANGE) return; REG_DBG_PRINT("Disabling freq %d MHz\n", chan->center_freq); @@ -1239,16 +1236,15 @@ static void handle_channel_custom(struct wiphy *wiphy, struct ieee80211_channel *chan, const struct ieee80211_regdomain *regd) { - int r; u32 bw_flags = 0; const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; const struct ieee80211_freq_range *freq_range = NULL; - r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), - ®_rule, regd); + reg_rule = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq), + regd); - if (r) { + if (IS_ERR(reg_rule)) { REG_DBG_PRINT("Disabling freq %d MHz as custom regd has no rule that fits it\n", chan->center_freq); chan->flags = IEEE80211_CHAN_DISABLED; -- cgit v1.2.3 From 75de9113bb9dc4939a7cd54e4bdfad555b35f5b1 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 14:56:03 +0100 Subject: mac80211: optimise AP stop RCU handling If there are VLANs, stopping an AP is inefficient as it calls rcu_barrier() once for each interface (the VLANs and the AP itself). Optimise this by moving rcu_barrier() out of the station cleanups and calling it only once for all interfaces combined. Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 9 +++++++-- net/mac80211/iface.c | 13 ++++++++----- net/mac80211/sta_info.c | 2 -- net/mac80211/sta_info.h | 14 ++++++++++++++ 4 files changed, 29 insertions(+), 9 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index be019533b233..908f1153942d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1010,8 +1010,13 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) kfree_rcu(old_probe_resp, rcu_head); list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - sta_info_flush(vlan); - sta_info_flush(sdata); + sta_info_flush_defer(vlan); + sta_info_flush_defer(sdata); + rcu_barrier(); + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + sta_info_flush_cleanup(vlan); + sta_info_flush_cleanup(sdata); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); drv_stop_ap(sdata->local, sdata); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 12341efb109e..1ab7d8e57d39 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -863,12 +863,15 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, cancel_work_sync(&sdata->work); /* * When we get here, the interface is marked down. - * sta_info_flush_cleanup() calls rcu_barrier to - * wait for the station call_rcu() calls to complete, - * here we require it to wait for the RX path in case - * it is using the interface and enqueuing frames at - * this very time on another CPU. + * + * sta_info_flush_cleanup() requires rcu_barrier() + * first to wait for the station call_rcu() calls + * to complete, here we need at least sychronize_rcu() + * it to wait for the RX path in case it is using the + * interface and enqueuing frames at this very time on + * another CPU. */ + rcu_barrier(); sta_info_flush_cleanup(sdata); skb_queue_purge(&sdata->skb_queue); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 7199b9d5b2f4..738f9349c0a2 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -920,8 +920,6 @@ int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata) void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata) { - rcu_barrier(); - ieee80211_cleanup_sdata_stas(sdata); cancel_work_sync(&sdata->cleanup_stations_wk); } diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index c3266aed4a07..031e4a5bbeca 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -549,6 +549,19 @@ void sta_info_recalc_tim(struct sta_info *sta); void sta_info_init(struct ieee80211_local *local); void sta_info_stop(struct ieee80211_local *local); int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata); + +/** + * sta_info_flush_cleanup - flush the sta_info cleanup queue + * @sdata: the interface + * + * Flushes the sta_info cleanup queue for a given interface; + * this is necessary before the interface is removed or, for + * AP/mesh interfaces, before it is deconfigured. + * + * Note an rcu_barrier() must precede the function, after all + * stations have been flushed/removed to ensure the call_rcu() + * calls that add stations to the cleanup queue have completed. + */ void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata); /** @@ -562,6 +575,7 @@ static inline int sta_info_flush(struct ieee80211_sub_if_data *sdata) { int ret = sta_info_flush_defer(sdata); + rcu_barrier(); sta_info_flush_cleanup(sdata); return ret; -- cgit v1.2.3 From 9cab315190cddbe3aaa31b64841354dd719afdfd Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 00:19:08 +0100 Subject: cfg80211: adjacent 80+80 MHz channel segments are invalid In that case, it's really a 160 MHz channel, so disallow this configuration. Signed-off-by: Johannes Berg --- net/wireless/chan.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/wireless/chan.c b/net/wireless/chan.c index a7990bb16529..396373f3ec26 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -76,6 +76,10 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef) return false; if (!chandef->center_freq2) return false; + /* adjacent is not allowed -- that's a 160 MHz channel */ + if (chandef->center_freq1 - chandef->center_freq2 == 80 || + chandef->center_freq2 - chandef->center_freq1 == 80) + return false; break; case NL80211_CHAN_WIDTH_80: if (chandef->center_freq1 != control_freq + 30 && -- cgit v1.2.3 From cc3983d8ab174ca43d5817f16c489b3cce3a795a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 7 Dec 2012 12:45:06 +0100 Subject: mac80211: fix ieee80211_ie_build_vht_cap indentation Signed-off-by: Johannes Berg --- net/mac80211/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index f11e8c540db4..051313f0d1c2 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1864,7 +1864,7 @@ u8 *ieee80211_ie_build_ht_cap(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap, } u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap, - u32 cap) + u32 cap) { __le32 tmp; -- cgit v1.2.3 From d45c41722a3eca639ced2c4c93665ced229b1da9 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 10 Dec 2012 16:19:13 +0200 Subject: mac82011: use frame control to differentiate probe resp/beacon The probe response/beacon management frame RX code passes a bool parameter to differentiate beacons and probe responses. This is useless since we have the frame and can thus use its frame control field. Moreover it is buggy since there is one call to ieee80211_rx_bss_info with a beacon frame that is indicated as a probe response, which is also fixed by using the frame control field, so do that. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/ibss.c | 50 ++++++++++++++++------------------------------ net/mac80211/ieee80211_i.h | 3 +-- net/mac80211/mlme.c | 13 +++++------- net/mac80211/scan.c | 9 ++++----- 4 files changed, 27 insertions(+), 48 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 854de974dc9a..272274931982 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -425,11 +425,9 @@ static void ieee80211_rx_mgmt_auth_ibss(struct ieee80211_sub_if_data *sdata, } static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - size_t len, + struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status, - struct ieee802_11_elems *elems, - bool beacon) + struct ieee802_11_elems *elems) { struct ieee80211_local *local = sdata->local; int freq; @@ -530,7 +528,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, } bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems, - channel, beacon); + channel); if (!bss) return; @@ -877,14 +875,21 @@ static void ieee80211_rx_mgmt_probe_req(struct ieee80211_sub_if_data *sdata, ieee80211_tx_skb(sdata, skb); } -static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - size_t len, - struct ieee80211_rx_status *rx_status) +static +void ieee80211_rx_mgmt_probe_beacon(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len, + struct ieee80211_rx_status *rx_status) { size_t baselen; struct ieee802_11_elems elems; + BUILD_BUG_ON(offsetof(typeof(mgmt->u.probe_resp), variable) != + offsetof(typeof(mgmt->u.beacon), variable)); + + /* + * either beacon or probe_resp but the variable field is at the + * same offset + */ baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt; if (baselen > len) return; @@ -892,25 +897,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, &elems); - ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false); -} - -static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - size_t len, - struct ieee80211_rx_status *rx_status) -{ - size_t baselen; - struct ieee802_11_elems elems; - - /* Process beacon from the current BSS */ - baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; - if (baselen > len) - return; - - ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems); - - ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, true); + ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); } void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, @@ -934,12 +921,9 @@ void ieee80211_ibss_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee80211_rx_mgmt_probe_req(sdata, skb); break; case IEEE80211_STYPE_PROBE_RESP: - ieee80211_rx_mgmt_probe_resp(sdata, mgmt, skb->len, - rx_status); - break; case IEEE80211_STYPE_BEACON: - ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, - rx_status); + ieee80211_rx_mgmt_probe_beacon(sdata, mgmt, skb->len, + rx_status); break; case IEEE80211_STYPE_AUTH: ieee80211_rx_mgmt_auth_ibss(sdata, mgmt, skb->len); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8563b9a5cac3..fa6d43e6197f 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1346,8 +1346,7 @@ ieee80211_bss_info_update(struct ieee80211_local *local, struct ieee80211_mgmt *mgmt, size_t len, struct ieee802_11_elems *elems, - struct ieee80211_channel *channel, - bool beacon); + struct ieee80211_channel *channel); void ieee80211_rx_bss_put(struct ieee80211_local *local, struct ieee80211_bss *bss); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3cf85d8629a7..7d253a022173 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2369,8 +2369,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status, - struct ieee802_11_elems *elems, - bool beacon) + struct ieee802_11_elems *elems) { struct ieee80211_local *local = sdata->local; int freq; @@ -2404,7 +2403,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, return; bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems, - channel, beacon); + channel); if (bss) ieee80211_rx_bss_put(local, bss); @@ -2447,7 +2446,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen, &elems); - ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false); + ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); if (ifmgd->associated && ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) @@ -2528,8 +2527,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems); - ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, - false); + ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); ifmgd->assoc_data->have_beacon = true; ifmgd->assoc_data->sent_assoc = false; /* continue assoc process */ @@ -2682,8 +2680,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ifmgd->beacon_crc = ncrc; ifmgd->beacon_crc_valid = true; - ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, - true); + ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); if (ieee80211_sta_wmm_params(local, sdata, elems.wmm_param, elems.wmm_param_len)) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index d59fc6818b1c..06cbe26892a8 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -65,12 +65,11 @@ static bool is_uapsd_supported(struct ieee802_11_elems *elems) struct ieee80211_bss * ieee80211_bss_info_update(struct ieee80211_local *local, struct ieee80211_rx_status *rx_status, - struct ieee80211_mgmt *mgmt, - size_t len, + struct ieee80211_mgmt *mgmt, size_t len, struct ieee802_11_elems *elems, - struct ieee80211_channel *channel, - bool beacon) + struct ieee80211_channel *channel) { + bool beacon = ieee80211_is_beacon(mgmt->frame_control); struct cfg80211_bss *cbss; struct ieee80211_bss *bss; int clen, srlen; @@ -203,7 +202,7 @@ void ieee80211_scan_rx(struct ieee80211_local *local, struct sk_buff *skb) bss = ieee80211_bss_info_update(local, rx_status, mgmt, skb->len, &elems, - channel, beacon); + channel); if (bss) ieee80211_rx_bss_put(local, bss); } -- cgit v1.2.3 From 61e8a48cc1283c8e4358b3ce06305d886c55f7ce Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 16:47:42 +0100 Subject: mac80211: clean up ieee80211_quiesce It's a bit odd that there's a return value that only depends on the iftype, move that logic out of the function into the only caller that needs it. Also, since the quiescing could stop timers that trigger the sdata work, move the sdata work cancel into the function and after the actual quiesce. Finally, there's no need to call it on interfaces that are down, so don't. Change-Id: I1632d46d21ba3558ea713d035184f1939905f2f1 Signed-off-by: Johannes Berg --- net/mac80211/pm.c | 36 +++++++++++++++++++----------------- 1 file changed, 19 insertions(+), 17 deletions(-) diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 79a48f37d409..f3217831d236 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -7,25 +7,23 @@ #include "led.h" /* return value indicates whether the driver should be further notified */ -static bool ieee80211_quiesce(struct ieee80211_sub_if_data *sdata) +static void ieee80211_quiesce(struct ieee80211_sub_if_data *sdata) { switch (sdata->vif.type) { case NL80211_IFTYPE_STATION: ieee80211_sta_quiesce(sdata); - return true; + break; case NL80211_IFTYPE_ADHOC: ieee80211_ibss_quiesce(sdata); - return true; + break; case NL80211_IFTYPE_MESH_POINT: ieee80211_mesh_quiesce(sdata); - return true; - case NL80211_IFTYPE_AP_VLAN: - case NL80211_IFTYPE_MONITOR: - /* don't tell driver about this */ - return false; + break; default: - return true; + break; } + + cancel_work_sync(&sdata->work); } int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) @@ -94,10 +92,9 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) WARN_ON(err != 1); local->wowlan = false; } else { - list_for_each_entry(sdata, &local->interfaces, list) { - cancel_work_sync(&sdata->work); - ieee80211_quiesce(sdata); - } + list_for_each_entry(sdata, &local->interfaces, list) + if (ieee80211_sdata_running(sdata)) + ieee80211_quiesce(sdata); goto suspend; } } @@ -124,13 +121,18 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) /* remove all interfaces */ list_for_each_entry(sdata, &local->interfaces, list) { - cancel_work_sync(&sdata->work); - - if (!ieee80211_quiesce(sdata)) + if (!ieee80211_sdata_running(sdata)) continue; - if (!ieee80211_sdata_running(sdata)) + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_MONITOR: + /* skip these */ continue; + default: + ieee80211_quiesce(sdata); + break; + } /* disable beaconing */ ieee80211_bss_info_change_notify(sdata, -- cgit v1.2.3 From 529ba6e9313dbe60dab7e72c6fdf647a012e9f5b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 17:16:45 +0100 Subject: mac80211: clean up association better in suspend When suspending, bss_info_changed() is called to disable beacons, but managed mode interfaces are simply removed (bss_info_changed() is called with "no change" only). This can lead to problems. To fix this and copy the BSS configuration, clear it during suspend and restore it on resume. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 5 +++++ net/mac80211/pm.c | 19 ++++++++++++++++--- net/mac80211/util.c | 5 +++++ 3 files changed, 26 insertions(+), 3 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index fa6d43e6197f..38e7883cff23 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -783,6 +783,11 @@ struct ieee80211_sub_if_data { struct dentry *default_mgmt_key; } debugfs; #endif + +#ifdef CONFIG_PM + struct ieee80211_bss_conf suspend_bss_conf; +#endif + /* must be last, dynamically sized area in this! */ struct ieee80211_vif vif; }; diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index f3217831d236..712c17ff6e22 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -121,6 +121,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) /* remove all interfaces */ list_for_each_entry(sdata, &local->interfaces, list) { + u32 changed = BSS_CHANGED_BEACON_ENABLED; + if (!ieee80211_sdata_running(sdata)) continue; @@ -129,14 +131,25 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) case NL80211_IFTYPE_MONITOR: /* skip these */ continue; + case NL80211_IFTYPE_STATION: + if (sdata->vif.bss_conf.assoc) + changed = BSS_CHANGED_ASSOC | + BSS_CHANGED_BSSID | + BSS_CHANGED_IDLE; + else + changed = 0; + /* fall through */ default: ieee80211_quiesce(sdata); break; } - /* disable beaconing */ - ieee80211_bss_info_change_notify(sdata, - BSS_CHANGED_BEACON_ENABLED); + sdata->suspend_bss_conf = sdata->vif.bss_conf; + memset(&sdata->vif.bss_conf, 0, sizeof(sdata->vif.bss_conf)); + sdata->vif.bss_conf.idle = true; + + /* disable beaconing or remove association */ + ieee80211_bss_info_change_notify(sdata, changed); if (sdata->vif.type == NL80211_IFTYPE_AP && rcu_access_pointer(sdata->u.ap.beacon)) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 051313f0d1c2..2e2e13bf96b2 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1526,6 +1526,11 @@ int ieee80211_reconfig(struct ieee80211_local *local) BSS_CHANGED_IDLE | BSS_CHANGED_TXPOWER; +#ifdef CONFIG_PM + if (local->resuming) + sdata->vif.bss_conf = sdata->suspend_bss_conf; +#endif + switch (sdata->vif.type) { case NL80211_IFTYPE_STATION: changed |= BSS_CHANGED_ASSOC | -- cgit v1.2.3 From 8a61af65c6d03781015315dbc43d0942a5b31db9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Dec 2012 17:42:30 +0100 Subject: mac80211: fix channel context iteration During suspend/resume channel contexts might be iterated even if they haven't been re-added to the driver, keep track of this and skip them in iteration. Also use the new status for sanity checks. Also clarify the fact that during HW restart all contexts are iterated over (thanks Eliad.) Signed-off-by: Johannes Berg --- include/net/mac80211.h | 5 +++++ net/mac80211/chan.c | 3 ++- net/mac80211/driver-ops.h | 15 ++++++++++++--- net/mac80211/ieee80211_i.h | 1 + 4 files changed, 20 insertions(+), 4 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ee50c5eba50c..0978b0faa880 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -3754,6 +3754,11 @@ void ieee80211_iter_keys(struct ieee80211_hw *hw, * The iterator will not find a context that's being added (during * the driver callback to add it) but will find it while it's being * removed. + * + * Note that during hardware restart, all contexts that existed + * before the restart are considered already present so will be + * found while iterating, whether they've been re-added already + * or not. */ void ieee80211_iter_chan_contexts_atomic( struct ieee80211_hw *hw, diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 80e55527504b..1bfe0a8b19d2 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -381,7 +381,8 @@ void ieee80211_iter_chan_contexts_atomic( rcu_read_lock(); list_for_each_entry_rcu(ctx, &local->chanctx_list, list) - iter(hw, &ctx->conf, iter_data); + if (ctx->driver_present) + iter(hw, &ctx->conf, iter_data); rcu_read_unlock(); } EXPORT_SYMBOL_GPL(ieee80211_iter_chan_contexts_atomic); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 698dc7e6f309..608ced41548d 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -913,6 +913,8 @@ static inline int drv_add_chanctx(struct ieee80211_local *local, if (local->ops->add_chanctx) ret = local->ops->add_chanctx(&local->hw, &ctx->conf); trace_drv_return_int(local, ret); + if (!ret) + ctx->driver_present = true; return ret; } @@ -924,6 +926,7 @@ static inline void drv_remove_chanctx(struct ieee80211_local *local, if (local->ops->remove_chanctx) local->ops->remove_chanctx(&local->hw, &ctx->conf); trace_drv_return_void(local); + ctx->driver_present = false; } static inline void drv_change_chanctx(struct ieee80211_local *local, @@ -931,8 +934,10 @@ static inline void drv_change_chanctx(struct ieee80211_local *local, u32 changed) { trace_drv_change_chanctx(local, ctx, changed); - if (local->ops->change_chanctx) + if (local->ops->change_chanctx) { + WARN_ON_ONCE(!ctx->driver_present); local->ops->change_chanctx(&local->hw, &ctx->conf, changed); + } trace_drv_return_void(local); } @@ -945,10 +950,12 @@ static inline int drv_assign_vif_chanctx(struct ieee80211_local *local, check_sdata_in_driver(sdata); trace_drv_assign_vif_chanctx(local, sdata, ctx); - if (local->ops->assign_vif_chanctx) + if (local->ops->assign_vif_chanctx) { + WARN_ON_ONCE(!ctx->driver_present); ret = local->ops->assign_vif_chanctx(&local->hw, &sdata->vif, &ctx->conf); + } trace_drv_return_int(local, ret); return ret; @@ -961,10 +968,12 @@ static inline void drv_unassign_vif_chanctx(struct ieee80211_local *local, check_sdata_in_driver(sdata); trace_drv_unassign_vif_chanctx(local, sdata, ctx); - if (local->ops->unassign_vif_chanctx) + if (local->ops->unassign_vif_chanctx) { + WARN_ON_ONCE(!ctx->driver_present); local->ops->unassign_vif_chanctx(&local->hw, &sdata->vif, &ctx->conf); + } trace_drv_return_void(local); } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 38e7883cff23..23161189b173 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -685,6 +685,7 @@ struct ieee80211_chanctx { enum ieee80211_chanctx_mode mode; int refcount; + bool driver_present; struct ieee80211_chanctx_conf conf; }; -- cgit v1.2.3 From d6a83228823fc0cc8d79d95c9f0bf568b7317862 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 14:06:28 +0100 Subject: mac80211: track enable_beacon explicitly Instead of calculating in ieee80211_bss_info_change_notify() whether beaconing should be enabled or not, set it in the correct places in the callers. This simplifies the logic in this function at the expense of offchannel, but is also more robust. Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 3 +++ net/mac80211/ibss.c | 3 +++ net/mac80211/ieee80211_i.h | 3 +++ net/mac80211/main.c | 32 -------------------------------- net/mac80211/mesh.c | 3 +++ net/mac80211/offchannel.c | 15 +++++++++------ 6 files changed, 21 insertions(+), 38 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 908f1153942d..3e7d557fd481 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -930,6 +930,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, sdata->vif.bss_conf.beacon_int = params->beacon_interval; sdata->vif.bss_conf.dtim_period = params->dtim_period; + sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.ssid_len = params->ssid_len; if (params->ssid_len) @@ -1017,6 +1018,8 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) sta_info_flush_cleanup(vlan); sta_info_flush_cleanup(sdata); + sdata->vif.bss_conf.enable_beacon = false; + clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); drv_stop_ap(sdata->local, sdata); diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 272274931982..b4b866f41919 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -191,6 +191,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, rcu_assign_pointer(ifibss->presp, skb); + sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.beacon_int = beacon_int; sdata->vif.bss_conf.basic_rates = basic_rates; bss_change = BSS_CHANGED_BEACON_INT; @@ -1189,6 +1190,8 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) RCU_INIT_POINTER(sdata->u.ibss.presp, NULL); sdata->vif.bss_conf.ibss_joined = false; sdata->vif.bss_conf.ibss_creator = false; + sdata->vif.bss_conf.enable_beacon = false; + clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_IBSS); synchronize_rcu(); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 23161189b173..c084c1503c04 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -659,10 +659,13 @@ enum ieee80211_sub_if_data_flags { * change handling while the interface is up * @SDATA_STATE_OFFCHANNEL: This interface is currently in offchannel * mode, so queues are stopped + * @SDATA_STATE_OFFCHANNEL_BEACON_STOPPED: Beaconing was stopped due + * to offchannel, reset when offchannel returns */ enum ieee80211_sdata_state_bits { SDATA_STATE_RUNNING, SDATA_STATE_OFFCHANNEL, + SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, }; /** diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 0c0d4cabd76c..71a64f49fe61 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -245,38 +245,6 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, break; } - if (changed & BSS_CHANGED_BEACON_ENABLED) { - if (local->quiescing || !ieee80211_sdata_running(sdata) || - test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state)) { - sdata->vif.bss_conf.enable_beacon = false; - } else { - /* - * Beacon should be enabled, but AP mode must - * check whether there is a beacon configured. - */ - switch (sdata->vif.type) { - case NL80211_IFTYPE_AP: - sdata->vif.bss_conf.enable_beacon = - !!sdata->u.ap.beacon; - break; - case NL80211_IFTYPE_ADHOC: - sdata->vif.bss_conf.enable_beacon = - !!sdata->u.ibss.presp; - break; -#ifdef CONFIG_MAC80211_MESH - case NL80211_IFTYPE_MESH_POINT: - sdata->vif.bss_conf.enable_beacon = - !!sdata->u.mesh.mesh_id_len; - break; -#endif - default: - /* not reached */ - WARN_ON(1); - break; - } - } - } - drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed); } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index c0008d5dff0a..fcfa7ef9af98 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -626,6 +626,7 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.ht_operation_mode = ifmsh->mshcfg.ht_opmode; sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; + sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); @@ -648,6 +649,8 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) /* stop the beacon */ ifmsh->mesh_id_len = 0; + sdata->vif.bss_conf.enable_beacon = false; + clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); /* flush STAs and mpaths on this iface */ diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index a5379aea7d09..1430b48600fc 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -126,11 +126,13 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state); /* Check to see if we should disable beaconing. */ - if (sdata->vif.type == NL80211_IFTYPE_AP || - sdata->vif.type == NL80211_IFTYPE_ADHOC || - sdata->vif.type == NL80211_IFTYPE_MESH_POINT) + if (sdata->vif.bss_conf.enable_beacon) { + set_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, + &sdata->state); + sdata->vif.bss_conf.enable_beacon = false; ieee80211_bss_info_change_notify( sdata, BSS_CHANGED_BEACON_ENABLED); + } if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { netif_tx_stop_all_queues(sdata->dev); @@ -183,11 +185,12 @@ void ieee80211_offchannel_return(struct ieee80211_local *local, netif_tx_wake_all_queues(sdata->dev); } - if (sdata->vif.type == NL80211_IFTYPE_AP || - sdata->vif.type == NL80211_IFTYPE_ADHOC || - sdata->vif.type == NL80211_IFTYPE_MESH_POINT) + if (test_and_clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, + &sdata->state)) { + sdata->vif.bss_conf.enable_beacon = true; ieee80211_bss_info_change_notify( sdata, BSS_CHANGED_BEACON_ENABLED); + } } mutex_unlock(&local->iflist_mtx); } -- cgit v1.2.3 From 8da349329ae52462253052f804ef30d086c9911a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 14:17:26 +0100 Subject: mac80211: reconfig bss_info_changed only if beaconing For AP/IBSS/mesh interfaces, call the driver to reconfigure bss_info_changed only if the interface was beaconing before suspend, otherwise we call the driver and it might interpret the change as going from enabled to disabled. Signed-off-by: Johannes Berg --- net/mac80211/util.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 2e2e13bf96b2..e27c89c27bf4 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1555,9 +1555,11 @@ int ieee80211_reconfig(struct ieee80211_local *local) /* fall through */ case NL80211_IFTYPE_MESH_POINT: - changed |= BSS_CHANGED_BEACON | - BSS_CHANGED_BEACON_ENABLED; - ieee80211_bss_info_change_notify(sdata, changed); + if (sdata->vif.bss_conf.enable_beacon) { + changed |= BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED; + ieee80211_bss_info_change_notify(sdata, changed); + } break; case NL80211_IFTYPE_WDS: break; -- cgit v1.2.3 From b8dc1a35c88dddcf62ce7bc59a7ed4c38c2f7597 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 14:22:10 +0100 Subject: mac80211: further simplify ieee80211_bss_info_change_notify The special case in the function isn't really needed, instead make the suspend code a bit better and also easier to understand and move the warning into the driver op wrapper inline. Signed-off-by: Johannes Berg --- net/mac80211/driver-ops.h | 6 ++++++ net/mac80211/main.c | 14 -------------- net/mac80211/pm.c | 15 ++++++++++----- 3 files changed, 16 insertions(+), 19 deletions(-) diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 608ced41548d..cccc486ae3d0 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -207,6 +207,12 @@ static inline void drv_bss_info_changed(struct ieee80211_local *local, { might_sleep(); + WARN_ON_ONCE(changed & (BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED) && + sdata->vif.type != NL80211_IFTYPE_AP && + sdata->vif.type != NL80211_IFTYPE_ADHOC && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT); + check_sdata_in_driver(sdata); trace_drv_bss_info_changed(local, sdata, info, changed); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 71a64f49fe61..b719a16eabde 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -231,20 +231,6 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, return; } - switch (sdata->vif.type) { - case NL80211_IFTYPE_AP: - case NL80211_IFTYPE_ADHOC: - case NL80211_IFTYPE_WDS: - case NL80211_IFTYPE_MESH_POINT: - break; - default: - /* do not warn to simplify caller in scan.c */ - changed &= ~BSS_CHANGED_BEACON_ENABLED; - if (WARN_ON(changed & BSS_CHANGED_BEACON)) - return; - break; - } - drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed); } diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 712c17ff6e22..8a67d7e982f7 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -121,7 +121,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) /* remove all interfaces */ list_for_each_entry(sdata, &local->interfaces, list) { - u32 changed = BSS_CHANGED_BEACON_ENABLED; + u32 changed = 0; if (!ieee80211_sdata_running(sdata)) continue; @@ -136,14 +136,19 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) changed = BSS_CHANGED_ASSOC | BSS_CHANGED_BSSID | BSS_CHANGED_IDLE; - else - changed = 0; - /* fall through */ + break; + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_MESH_POINT: + if (sdata->vif.bss_conf.enable_beacon) + changed = BSS_CHANGED_BEACON_ENABLED; + break; default: - ieee80211_quiesce(sdata); break; } + ieee80211_quiesce(sdata); + sdata->suspend_bss_conf = sdata->vif.bss_conf; memset(&sdata->vif.bss_conf, 0, sizeof(sdata->vif.bss_conf)); sdata->vif.bss_conf.idle = true; -- cgit v1.2.3 From ad2d223aa900179031feb40273881e212941573d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 14 Dec 2012 14:34:25 +0100 Subject: mac80211: assign bss_conf.bssid only once Instead of checking every time bss_info_changed is called, assign the pointer once depending on the interface type and then leave it untouched until the interface type is changed. This makes the ieee80211_bss_info_change_notify() now a simple wrapper to call the driver only. Signed-off-by: Johannes Berg --- net/mac80211/driver-ops.h | 2 ++ net/mac80211/iface.c | 7 +++++++ net/mac80211/main.c | 20 -------------------- net/mac80211/mesh.c | 3 +++ net/mac80211/pm.c | 3 +++ 5 files changed, 15 insertions(+), 20 deletions(-) diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index cccc486ae3d0..0c07f94c5378 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -212,6 +212,8 @@ static inline void drv_bss_info_changed(struct ieee80211_local *local, sdata->vif.type != NL80211_IFTYPE_AP && sdata->vif.type != NL80211_IFTYPE_ADHOC && sdata->vif.type != NL80211_IFTYPE_MESH_POINT); + WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE && + changed & ~BSS_CHANGED_IDLE); check_sdata_in_driver(sdata); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 1ab7d8e57d39..06fac2991d40 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1227,6 +1227,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, case NL80211_IFTYPE_AP: skb_queue_head_init(&sdata->u.ap.ps.bc_buf); INIT_LIST_HEAD(&sdata->u.ap.vlans); + sdata->vif.bss_conf.bssid = sdata->vif.addr; break; case NL80211_IFTYPE_P2P_CLIENT: type = NL80211_IFTYPE_STATION; @@ -1234,9 +1235,11 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, sdata->vif.p2p = true; /* fall through */ case NL80211_IFTYPE_STATION: + sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid; ieee80211_sta_setup_sdata(sdata); break; case NL80211_IFTYPE_ADHOC: + sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid; ieee80211_ibss_setup_sdata(sdata); break; case NL80211_IFTYPE_MESH_POINT: @@ -1250,8 +1253,12 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, MONITOR_FLAG_OTHER_BSS; break; case NL80211_IFTYPE_WDS: + sdata->vif.bss_conf.bssid = NULL; + break; case NL80211_IFTYPE_AP_VLAN: + break; case NL80211_IFTYPE_P2P_DEVICE: + sdata->vif.bss_conf.bssid = sdata->vif.addr; break; case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: diff --git a/net/mac80211/main.c b/net/mac80211/main.c index b719a16eabde..e6514f240fce 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -207,30 +207,10 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, u32 changed) { struct ieee80211_local *local = sdata->local; - static const u8 zero[ETH_ALEN] = { 0 }; if (!changed) return; - if (sdata->vif.type == NL80211_IFTYPE_STATION) { - sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid; - } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) - sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid; - else if (sdata->vif.type == NL80211_IFTYPE_AP) - sdata->vif.bss_conf.bssid = sdata->vif.addr; - else if (sdata->vif.type == NL80211_IFTYPE_WDS) - sdata->vif.bss_conf.bssid = NULL; - else if (ieee80211_vif_is_mesh(&sdata->vif)) { - sdata->vif.bss_conf.bssid = zero; - } else if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) { - sdata->vif.bss_conf.bssid = sdata->vif.addr; - WARN_ONCE(changed & ~(BSS_CHANGED_IDLE), - "P2P Device BSS changed %#x", changed); - } else { - WARN_ON(1); - return; - } - drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed); } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index fcfa7ef9af98..245885841c8d 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -810,6 +810,7 @@ void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local) void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + static u8 zero_addr[ETH_ALEN] = {}; setup_timer(&ifmsh->housekeeping_timer, ieee80211_mesh_housekeeping_timer, @@ -835,4 +836,6 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) INIT_LIST_HEAD(&ifmsh->preq_queue.list); spin_lock_init(&ifmsh->mesh_preq_queue_lock); spin_lock_init(&ifmsh->sync_offset_lock); + + sdata->vif.bss_conf.bssid = zero_addr; } diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 8a67d7e982f7..f81fd30581d9 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -121,6 +121,7 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) /* remove all interfaces */ list_for_each_entry(sdata, &local->interfaces, list) { + static u8 zero_addr[ETH_ALEN] = {}; u32 changed = 0; if (!ieee80211_sdata_running(sdata)) @@ -152,6 +153,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) sdata->suspend_bss_conf = sdata->vif.bss_conf; memset(&sdata->vif.bss_conf, 0, sizeof(sdata->vif.bss_conf)); sdata->vif.bss_conf.idle = true; + if (sdata->suspend_bss_conf.bssid) + sdata->vif.bss_conf.bssid = zero_addr; /* disable beaconing or remove association */ ieee80211_bss_info_change_notify(sdata, changed); -- cgit v1.2.3 From 3ebfa6e76beab01e644e1facd5fdb84d4274043e Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 19 Dec 2012 10:53:02 -0800 Subject: cfg80211: do not process beacon hints if one is already queued Regulatory beacon hints are used to help with world roaming and as it is right now we learn from a beacon hint processed on one wiphy to all other wiphys. The processing of beacon hints however is scheduled and if we have a lot of interfaces we may hit the case that we'll queue a the same beacon hint many times until its processed. To avoid this do a lookup on the queued up beacon hints prior to adding a new beacon hint. If the beacon hint is removed from the pending reg beacon hint list then it would be processed and we'd ensure all wiphys would have learned from it, if its on the pending reg beacon list we'd now find it prior to it being processed. Tested-by: Ben Greear Reported-by: Ben Greear Reported-by: Johannes Berg Signed-off-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index fd53d975c0bc..2a3ae4d1001d 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1925,11 +1925,23 @@ static bool freq_is_chan_12_13_14(u16 freq) return false; } +static bool pending_reg_beacon(struct ieee80211_channel *beacon_chan) +{ + struct reg_beacon *pending_beacon; + + list_for_each_entry(pending_beacon, ®_pending_beacons, list) + if (beacon_chan->center_freq == + pending_beacon->chan.center_freq) + return true; + return false; +} + int regulatory_hint_found_beacon(struct wiphy *wiphy, struct ieee80211_channel *beacon_chan, gfp_t gfp) { struct reg_beacon *reg_beacon; + bool processing; if (beacon_chan->beacon_found || beacon_chan->flags & IEEE80211_CHAN_RADAR || @@ -1937,6 +1949,13 @@ int regulatory_hint_found_beacon(struct wiphy *wiphy, !freq_is_chan_12_13_14(beacon_chan->center_freq))) return 0; + spin_lock_bh(®_pending_beacons_lock); + processing = pending_reg_beacon(beacon_chan); + spin_unlock_bh(®_pending_beacons_lock); + + if (processing) + return 0; + reg_beacon = kzalloc(sizeof(struct reg_beacon), gfp); if (!reg_beacon) return -ENOMEM; -- cgit v1.2.3 From 3195e489a878aaa3b735d4a1b7c5c79b3786efed Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 19 Dec 2012 10:53:03 -0800 Subject: cfg80211: move reg_is_world_roaming() This will be used later by other code. This has no functional change. Tested-by: Ben Greear Reported-by: Ben Greear Reported-by: Johannes Berg Signed-off-by: Luis R. Rodriguez Signed-off-by: Johannes Berg --- net/wireless/reg.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2a3ae4d1001d..b68eeef45e6c 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1009,6 +1009,22 @@ static bool ignore_reg_update(struct wiphy *wiphy, return false; } +static bool reg_is_world_roaming(struct wiphy *wiphy) +{ + const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); + const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); + struct regulatory_request *lr = get_last_request(); + + if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) + return true; + + if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && + wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) + return true; + + return false; +} + static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, struct reg_beacon *reg_beacon) { @@ -1085,22 +1101,6 @@ static void wiphy_update_beacon_reg(struct wiphy *wiphy) } } -static bool reg_is_world_roaming(struct wiphy *wiphy) -{ - const struct ieee80211_regdomain *cr = get_cfg80211_regdom(); - const struct ieee80211_regdomain *wr = get_wiphy_regdom(wiphy); - struct regulatory_request *lr = get_last_request(); - - if (is_world_regdom(cr->alpha2) || (wr && is_world_regdom(wr->alpha2))) - return true; - - if (lr && lr->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE && - wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY) - return true; - - return false; -} - /* Reap the advantages of previously found beacons */ static void reg_process_beacons(struct wiphy *wiphy) { -- cgit v1.2.3 From 0f500a5f6cadac888d5d3fce326452372d1a8343 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Wed, 19 Dec 2012 10:53:04 -0800 Subject: cfg80211: move world roaming check for beacon hints We should not add new beacon hints even if the wiphy is not world roaming. Without this we were always adding a beacon hint if not world roaming for every non world roaming wiphy interface. Tested-by: Ben Greear Reported-by: Ben Greear Reported-by: Johannes Berg Signed-off-by: Luis R. Rodriguez [fix locking] Signed-off-by: Johannes Berg --- net/wireless/reg.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index b68eeef45e6c..0b35de001937 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1044,6 +1044,9 @@ static void handle_reg_beacon(struct wiphy *wiphy, unsigned int chan_idx, chan->beacon_found = true; + if (!reg_is_world_roaming(wiphy)) + return; + if (wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS) return; @@ -1110,8 +1113,6 @@ static void reg_process_beacons(struct wiphy *wiphy) */ if (!last_request) return; - if (!reg_is_world_roaming(wiphy)) - return; wiphy_update_beacon_reg(wiphy); } @@ -1593,11 +1594,8 @@ static void reg_process_pending_beacon_hints(void) struct cfg80211_registered_device *rdev; struct reg_beacon *pending_beacon, *tmp; - /* - * No need to hold the reg_mutex here as we just touch wiphys - * and do not read or access regulatory variables. - */ mutex_lock(&cfg80211_mutex); + mutex_lock(®_mutex); /* This goes through the _pending_ beacon list */ spin_lock_bh(®_pending_beacons_lock); @@ -1615,6 +1613,7 @@ static void reg_process_pending_beacon_hints(void) } spin_unlock_bh(®_pending_beacons_lock); + mutex_unlock(®_mutex); mutex_unlock(&cfg80211_mutex); } -- cgit v1.2.3 From b08fbbd8ade1fe3eea821a65b98d9f6a828329da Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 7 Dec 2012 13:06:48 +0100 Subject: mac80211: restrict assoc request VHT capabilities In interoperability testing some APs showed bad behaviour if some of the VHT capabilities of the station are better than their own. Restrict the assoc request parameters - beamformee capabable, - RX STBC and - RX MCS set to the subset that the AP can support. Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 2 ++ net/mac80211/mlme.c | 51 +++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 50 insertions(+), 3 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c084c1503c04..7182907e282a 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -405,6 +405,8 @@ struct ieee80211_mgd_assoc_data { u8 ap_ht_param; + struct ieee80211_vht_cap ap_vht_cap; + size_t ie_len; u8 ie[]; }; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7d253a022173..6ffbf701de95 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -341,11 +341,13 @@ static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, - struct ieee80211_supported_band *sband) + struct ieee80211_supported_band *sband, + struct ieee80211_vht_cap *ap_vht_cap) { u8 *pos; u32 cap; struct ieee80211_sta_vht_cap vht_cap; + int i; BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap)); @@ -364,6 +366,42 @@ static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; } + /* + * Some APs apparently get confused if our capabilities are better + * than theirs, so restrict what we advertise in the assoc request. + */ + if (!(ap_vht_cap->vht_cap_info & + cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE))) + cap &= ~IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE; + + if (!(ap_vht_cap->vht_cap_info & + cpu_to_le32(IEEE80211_VHT_CAP_TXSTBC))) + cap &= ~(IEEE80211_VHT_CAP_RXSTBC_1 | + IEEE80211_VHT_CAP_RXSTBC_3 | + IEEE80211_VHT_CAP_RXSTBC_4); + + for (i = 0; i < 8; i++) { + int shift = i * 2; + u16 mask = IEEE80211_VHT_MCS_NOT_SUPPORTED << shift; + u16 ap_mcs, our_mcs; + + ap_mcs = (le16_to_cpu(ap_vht_cap->supp_mcs.tx_mcs_map) & + mask) >> shift; + our_mcs = (le16_to_cpu(vht_cap.vht_mcs.rx_mcs_map) & + mask) >> shift; + + switch (ap_mcs) { + default: + if (our_mcs <= ap_mcs) + break; + /* fall through */ + case IEEE80211_VHT_MCS_NOT_SUPPORTED: + vht_cap.vht_mcs.rx_mcs_map &= cpu_to_le16(~mask); + vht_cap.vht_mcs.rx_mcs_map |= + cpu_to_le16(ap_mcs << shift); + } + } + /* reserve and fill IE */ pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2); ieee80211_ie_build_vht_cap(pos, &vht_cap, cap); @@ -562,7 +600,8 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) sband, chan, sdata->smps_mode); if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) - ieee80211_add_vht_ie(sdata, skb, sband); + ieee80211_add_vht_ie(sdata, skb, sband, + &assoc_data->ap_vht_cap); /* if present, add any custom non-vendor IEs that go after HT */ if (assoc_data->ie_len && assoc_data->ie) { @@ -3753,7 +3792,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, struct ieee80211_bss *bss = (void *)req->bss->priv; struct ieee80211_mgd_assoc_data *assoc_data; struct ieee80211_supported_band *sband; - const u8 *ssidie, *ht_ie; + const u8 *ssidie, *ht_ie, *vht_ie; int i, err; assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL); @@ -3872,6 +3911,12 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param; else ifmgd->flags |= IEEE80211_STA_DISABLE_HT; + vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY); + if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap)) + memcpy(&assoc_data->ap_vht_cap, vht_ie + 2, + sizeof(struct ieee80211_vht_cap)); + else + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; rcu_read_unlock(); if (bss->wmm_used && bss->uapsd_supported && -- cgit v1.2.3 From dfa674da1807bc8fb782fc38a7d48c8ea3168eb7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 20 Dec 2012 18:23:01 +0100 Subject: cfg80211: move some AP code to right file Some AP code ended up in mlme.c as ap.c didn't exist when it was written, move it now. Signed-off-by: Johannes Berg --- net/wireless/ap.c | 62 +++++++++++++++++++++++++++++++++++++++++++++++++++++ net/wireless/mlme.c | 62 ----------------------------------------------------- 2 files changed, 62 insertions(+), 62 deletions(-) diff --git a/net/wireless/ap.c b/net/wireless/ap.c index 324e8d851dc4..a4a14e8f55cc 100644 --- a/net/wireless/ap.c +++ b/net/wireless/ap.c @@ -46,3 +46,65 @@ int cfg80211_stop_ap(struct cfg80211_registered_device *rdev, return err; } + +void cfg80211_ch_switch_notify(struct net_device *dev, + struct cfg80211_chan_def *chandef) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + + trace_cfg80211_ch_switch_notify(dev, chandef); + + wdev_lock(wdev); + + if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && + wdev->iftype != NL80211_IFTYPE_P2P_GO)) + goto out; + + wdev->channel = chandef->chan; + nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL); +out: + wdev_unlock(wdev); + return; +} +EXPORT_SYMBOL(cfg80211_ch_switch_notify); + +bool cfg80211_rx_spurious_frame(struct net_device *dev, + const u8 *addr, gfp_t gfp) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + bool ret; + + trace_cfg80211_rx_spurious_frame(dev, addr); + + if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && + wdev->iftype != NL80211_IFTYPE_P2P_GO)) { + trace_cfg80211_return_bool(false); + return false; + } + ret = nl80211_unexpected_frame(dev, addr, gfp); + trace_cfg80211_return_bool(ret); + return ret; +} +EXPORT_SYMBOL(cfg80211_rx_spurious_frame); + +bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, + const u8 *addr, gfp_t gfp) +{ + struct wireless_dev *wdev = dev->ieee80211_ptr; + bool ret; + + trace_cfg80211_rx_unexpected_4addr_frame(dev, addr); + + if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && + wdev->iftype != NL80211_IFTYPE_P2P_GO && + wdev->iftype != NL80211_IFTYPE_AP_VLAN)) { + trace_cfg80211_return_bool(false); + return false; + } + ret = nl80211_unexpected_4addr_frame(dev, addr, gfp); + trace_cfg80211_return_bool(ret); + return ret; +} +EXPORT_SYMBOL(cfg80211_rx_unexpected_4addr_frame); diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 5e8123ee63fd..461e692cdfec 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -987,65 +987,3 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, nl80211_pmksa_candidate_notify(rdev, dev, index, bssid, preauth, gfp); } EXPORT_SYMBOL(cfg80211_pmksa_candidate_notify); - -void cfg80211_ch_switch_notify(struct net_device *dev, - struct cfg80211_chan_def *chandef) -{ - struct wireless_dev *wdev = dev->ieee80211_ptr; - struct wiphy *wiphy = wdev->wiphy; - struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); - - trace_cfg80211_ch_switch_notify(dev, chandef); - - wdev_lock(wdev); - - if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && - wdev->iftype != NL80211_IFTYPE_P2P_GO)) - goto out; - - wdev->channel = chandef->chan; - nl80211_ch_switch_notify(rdev, dev, chandef, GFP_KERNEL); -out: - wdev_unlock(wdev); - return; -} -EXPORT_SYMBOL(cfg80211_ch_switch_notify); - -bool cfg80211_rx_spurious_frame(struct net_device *dev, - const u8 *addr, gfp_t gfp) -{ - struct wireless_dev *wdev = dev->ieee80211_ptr; - bool ret; - - trace_cfg80211_rx_spurious_frame(dev, addr); - - if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && - wdev->iftype != NL80211_IFTYPE_P2P_GO)) { - trace_cfg80211_return_bool(false); - return false; - } - ret = nl80211_unexpected_frame(dev, addr, gfp); - trace_cfg80211_return_bool(ret); - return ret; -} -EXPORT_SYMBOL(cfg80211_rx_spurious_frame); - -bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, - const u8 *addr, gfp_t gfp) -{ - struct wireless_dev *wdev = dev->ieee80211_ptr; - bool ret; - - trace_cfg80211_rx_unexpected_4addr_frame(dev, addr); - - if (WARN_ON(wdev->iftype != NL80211_IFTYPE_AP && - wdev->iftype != NL80211_IFTYPE_P2P_GO && - wdev->iftype != NL80211_IFTYPE_AP_VLAN)) { - trace_cfg80211_return_bool(false); - return false; - } - ret = nl80211_unexpected_4addr_frame(dev, addr, gfp); - trace_cfg80211_return_bool(ret); - return ret; -} -EXPORT_SYMBOL(cfg80211_rx_unexpected_4addr_frame); -- cgit v1.2.3 From d582cffbcd04eae0bd8a83b05648bfd54bfd21c9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 26 Oct 2012 17:53:44 +0200 Subject: nl80211/mac80211: support full station state in AP mode Today, stations are added already associated. That is inefficient if, for example, the driver has no room for stations any more because then the station will go through the entire auth/assoc handshake, only to be kicked out afterwards. To address this a bit better, at least with drivers using the new station state callback, allow hostapd to add stations in unauthenticated mode, just after receiving the AUTH frame, before even replying. Thus if there's no more space at that point, it can send a negative auth frame back. It still needs to handle later state transition errors though, of course. Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 16 ++++++ net/mac80211/cfg.c | 115 ++++++++++++++++++++++++++----------------- net/mac80211/main.c | 3 +- net/wireless/nl80211.c | 24 +++++++++ 4 files changed, 113 insertions(+), 45 deletions(-) diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index e3e19f8b16f2..547017100a30 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1697,6 +1697,9 @@ enum nl80211_iftype { * flag can't be changed, it is only valid while adding a station, and * attempts to change it will silently be ignored (rather than rejected * as errors.) + * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers + * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a + * previously added station into associated state * @NL80211_STA_FLAG_MAX: highest station flag number currently defined * @__NL80211_STA_FLAG_AFTER_LAST: internal use */ @@ -1708,6 +1711,7 @@ enum nl80211_sta_flags { NL80211_STA_FLAG_MFP, NL80211_STA_FLAG_AUTHENTICATED, NL80211_STA_FLAG_TDLS_PEER, + NL80211_STA_FLAG_ASSOCIATED, /* keep last */ __NL80211_STA_FLAG_AFTER_LAST, @@ -3140,6 +3144,17 @@ enum nl80211_ap_sme_features { * setting * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic * powersave + * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state + * transitions for AP clients. Without this flag (and if the driver + * doesn't have the AP SME in the device) the driver supports adding + * stations only when they're associated and adds them in associated + * state (to later be transitioned into authorized), with this flag + * they should be added before even sending the authentication reply + * and then transitioned into authenticated, associated and authorized + * states using station flags. + * Note that even for drivers that support this, the default is to add + * stations in authenticated/associated state, so to add unauthenticated + * stations the authenticated/associated bits have to be set in the mask. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3155,6 +3170,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 13, }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 3e7d557fd481..f4d12c71928d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -510,6 +510,7 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) BIT(NL80211_STA_FLAG_WME) | BIT(NL80211_STA_FLAG_MFP) | BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED) | BIT(NL80211_STA_FLAG_TDLS_PEER); if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHORIZED); @@ -521,6 +522,8 @@ static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_MFP); if (test_sta_flag(sta, WLAN_STA_AUTH)) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_AUTHENTICATED); + if (test_sta_flag(sta, WLAN_STA_ASSOC)) + sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_ASSOCIATED); if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) sinfo->sta_flags.set |= BIT(NL80211_STA_FLAG_TDLS_PEER); } @@ -1077,6 +1080,58 @@ static void ieee80211_send_layer2_update(struct sta_info *sta) netif_rx_ni(skb); } +static int sta_apply_auth_flags(struct ieee80211_local *local, + struct sta_info *sta, + u32 mask, u32 set) +{ + int ret; + + if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && + set & BIT(NL80211_STA_FLAG_AUTHENTICATED) && + !test_sta_flag(sta, WLAN_STA_AUTH)) { + ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && + set & BIT(NL80211_STA_FLAG_ASSOCIATED) && + !test_sta_flag(sta, WLAN_STA_ASSOC)) { + ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { + if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) + ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); + else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) + ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); + else + ret = 0; + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_ASSOCIATED) && + !(set & BIT(NL80211_STA_FLAG_ASSOCIATED)) && + test_sta_flag(sta, WLAN_STA_ASSOC)) { + ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); + if (ret) + return ret; + } + + if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED) && + !(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) && + test_sta_flag(sta, WLAN_STA_AUTH)) { + ret = sta_info_move_state(sta, IEEE80211_STA_NONE); + if (ret) + return ret; + } + + return 0; +} + static int sta_apply_parameters(struct ieee80211_local *local, struct sta_info *sta, struct station_parameters *params) @@ -1094,52 +1149,20 @@ static int sta_apply_parameters(struct ieee80211_local *local, mask = params->sta_flags_mask; set = params->sta_flags_set; - /* - * In mesh mode, we can clear AUTHENTICATED flag but must - * also make ASSOCIATED follow appropriately for the driver - * API. See also below, after AUTHORIZED changes. - */ - if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) { - /* cfg80211 should not allow this in non-mesh modes */ - if (WARN_ON(!ieee80211_vif_is_mesh(&sdata->vif))) - return -EINVAL; - - if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED) && - !test_sta_flag(sta, WLAN_STA_AUTH)) { - ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); - if (ret) - return ret; - ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); - if (ret) - return ret; - } - } - - if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { - if (set & BIT(NL80211_STA_FLAG_AUTHORIZED)) - ret = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); - else if (test_sta_flag(sta, WLAN_STA_AUTHORIZED)) - ret = sta_info_move_state(sta, IEEE80211_STA_ASSOC); - if (ret) - return ret; - } - - if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) { - /* cfg80211 should not allow this in non-mesh modes */ - if (WARN_ON(!ieee80211_vif_is_mesh(&sdata->vif))) - return -EINVAL; - - if (!(set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) && - test_sta_flag(sta, WLAN_STA_AUTH)) { - ret = sta_info_move_state(sta, IEEE80211_STA_AUTH); - if (ret) - return ret; - ret = sta_info_move_state(sta, IEEE80211_STA_NONE); - if (ret) - return ret; - } + if (ieee80211_vif_is_mesh(&sdata->vif)) { + /* + * In mesh mode, ASSOCIATED isn't part of the nl80211 + * API but must follow AUTHENTICATED for driver state. + */ + if (mask & BIT(NL80211_STA_FLAG_AUTHENTICATED)) + mask |= BIT(NL80211_STA_FLAG_ASSOCIATED); + if (set & BIT(NL80211_STA_FLAG_AUTHENTICATED)) + set |= BIT(NL80211_STA_FLAG_ASSOCIATED); } + ret = sta_apply_auth_flags(local, sta, mask, set); + if (ret) + return ret; if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) { if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) @@ -1273,6 +1296,10 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, if (!sta) return -ENOMEM; + /* + * defaults -- if userspace wants something else we'll + * change it accordingly in sta_apply_parameters() + */ sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index e6514f240fce..39cfe8f10ad2 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -541,7 +541,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, wiphy->features |= NL80211_FEATURE_SK_TX_STATUS | NL80211_FEATURE_SAE | NL80211_FEATURE_HT_IBSS | - NL80211_FEATURE_VIF_TXPOWER; + NL80211_FEATURE_VIF_TXPOWER | + NL80211_FEATURE_FULL_AP_CLIENT_STATE; if (!ops->hw_scan) wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN | diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index b3cf7cc0d4a1..087f68ba6d7a 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3231,11 +3231,21 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* accept only the listed bits */ if (params.sta_flags_mask & ~(BIT(NL80211_STA_FLAG_AUTHORIZED) | + BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED) | BIT(NL80211_STA_FLAG_SHORT_PREAMBLE) | BIT(NL80211_STA_FLAG_WME) | BIT(NL80211_STA_FLAG_MFP))) return -EINVAL; + /* but authenticated/associated only if driver handles it */ + if (!(rdev->wiphy.features & + NL80211_FEATURE_FULL_AP_CLIENT_STATE) && + params.sta_flags_mask & + (BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED))) + return -EINVAL; + /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); if (IS_ERR(params.vlan)) @@ -3393,17 +3403,31 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) /* but don't bother the driver with it */ params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER); + /* allow authenticated/associated only if driver handles it */ + if (!(rdev->wiphy.features & + NL80211_FEATURE_FULL_AP_CLIENT_STATE) && + params.sta_flags_mask & + (BIT(NL80211_STA_FLAG_AUTHENTICATED) | + BIT(NL80211_STA_FLAG_ASSOCIATED))) + return -EINVAL; + /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); if (IS_ERR(params.vlan)) return PTR_ERR(params.vlan); break; case NL80211_IFTYPE_MESH_POINT: + /* associated is disallowed */ + if (params.sta_flags_mask & BIT(NL80211_STA_FLAG_ASSOCIATED)) + return -EINVAL; /* TDLS peers cannot be added */ if (params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) return -EINVAL; break; case NL80211_IFTYPE_STATION: + /* associated is disallowed */ + if (params.sta_flags_mask & BIT(NL80211_STA_FLAG_ASSOCIATED)) + return -EINVAL; /* Only TDLS peers can be added */ if (!(params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER))) return -EINVAL; -- cgit v1.2.3 From c82c4a80bbb9c8ffa1d783070a8caa37f2db45b6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jul 2012 13:31:31 +0200 Subject: mac80211: split aggregation stop by reason The initiator/tx doesn't really identify why an aggregation session is stopped, give a reason for stopping that more clearly identifies what's going on. This will help tell the driver clearly what is expected of it. Signed-off-by: Johannes Berg --- net/mac80211/agg-tx.c | 17 ++++++++--------- net/mac80211/ht.c | 15 ++++++++------- net/mac80211/ieee80211_i.h | 9 ++++----- net/mac80211/mlme.c | 2 +- net/mac80211/pm.c | 3 ++- net/mac80211/sta_info.c | 2 +- net/mac80211/sta_info.h | 7 +++++++ net/mac80211/util.c | 3 ++- 8 files changed, 33 insertions(+), 25 deletions(-) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index eb9df22418f0..e0656d77b313 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -150,8 +150,7 @@ void ieee80211_assign_tid_tx(struct sta_info *sta, int tid, } int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, - enum ieee80211_back_parties initiator, - bool tx) + enum ieee80211_agg_stop_reason reason) { struct ieee80211_local *local = sta->local; struct tid_ampdu_tx *tid_tx; @@ -212,8 +211,10 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, */ synchronize_net(); - tid_tx->stop_initiator = initiator; - tid_tx->tx_stop = tx; + tid_tx->stop_initiator = reason == AGG_STOP_PEER_REQUEST ? + WLAN_BACK_RECIPIENT : + WLAN_BACK_INITIATOR; + tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST; ret = drv_ampdu_action(local, sta->sdata, IEEE80211_AMPDU_TX_STOP, @@ -660,14 +661,13 @@ void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe); int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, - enum ieee80211_back_parties initiator, - bool tx) + enum ieee80211_agg_stop_reason reason) { int ret; mutex_lock(&sta->ampdu_mlme.mtx); - ret = ___ieee80211_stop_tx_ba_session(sta, tid, initiator, tx); + ret = ___ieee80211_stop_tx_ba_session(sta, tid, reason); mutex_unlock(&sta->ampdu_mlme.mtx); @@ -868,8 +868,7 @@ void ieee80211_process_addba_resp(struct ieee80211_local *local, } } else { - ___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR, - false); + ___ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_DECLINED); } out: diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 8a6d68f1f404..df46cd8e55f5 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -182,16 +182,19 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, ieee80211_apply_htcap_overrides(sdata, ht_cap); } -void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, bool tx) +void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, + enum ieee80211_agg_stop_reason reason) { int i; cancel_work_sync(&sta->ampdu_mlme.work); for (i = 0; i < IEEE80211_NUM_TIDS; i++) { - __ieee80211_stop_tx_ba_session(sta, i, WLAN_BACK_INITIATOR, tx); + __ieee80211_stop_tx_ba_session(sta, i, reason); __ieee80211_stop_rx_ba_session(sta, i, WLAN_BACK_RECIPIENT, - WLAN_REASON_QSTA_LEAVE_QBSS, tx); + WLAN_REASON_QSTA_LEAVE_QBSS, + reason != AGG_STOP_DESTROY_STA && + reason != AGG_STOP_PEER_REQUEST); } } @@ -248,8 +251,7 @@ void ieee80211_ba_session_work(struct work_struct *work) if (tid_tx && test_and_clear_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state)) ___ieee80211_stop_tx_ba_session(sta, tid, - WLAN_BACK_INITIATOR, - true); + AGG_STOP_LOCAL_REQUEST); } mutex_unlock(&sta->ampdu_mlme.mtx); } @@ -317,8 +319,7 @@ void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, __ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_INITIATOR, 0, true); else - __ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_RECIPIENT, - true); + __ieee80211_stop_tx_ba_session(sta, tid, AGG_STOP_PEER_REQUEST); } int ieee80211_send_smps_action(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 7182907e282a..0fa44a965ad9 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1432,7 +1432,8 @@ void ___ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, u16 initiator, u16 reason, bool stop); void __ieee80211_stop_rx_ba_session(struct sta_info *sta, u16 tid, u16 initiator, u16 reason, bool stop); -void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, bool tx); +void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, + enum ieee80211_agg_stop_reason reason); void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_mgmt *mgmt, size_t len); @@ -1446,11 +1447,9 @@ void ieee80211_process_addba_request(struct ieee80211_local *local, size_t len); int __ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, - enum ieee80211_back_parties initiator, - bool tx); + enum ieee80211_agg_stop_reason reason); int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, - enum ieee80211_back_parties initiator, - bool tx); + enum ieee80211_agg_stop_reason reason); void ieee80211_start_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u16 tid); void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid); void ieee80211_ba_session_work(struct work_struct *work); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 6ffbf701de95..d90c07b1795f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1525,7 +1525,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, sta = sta_info_get(sdata, ifmgd->bssid); if (sta) { set_sta_flag(sta, WLAN_STA_BLOCK_BA); - ieee80211_sta_tear_down_BA_sessions(sta, false); + ieee80211_sta_tear_down_BA_sessions(sta, AGG_STOP_DESTROY_STA); } mutex_unlock(&local->sta_mtx); diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index f81fd30581d9..e45b83610e85 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -42,7 +42,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) mutex_lock(&local->sta_mtx); list_for_each_entry(sta, &local->sta_list, list) { set_sta_flag(sta, WLAN_STA_BLOCK_BA); - ieee80211_sta_tear_down_BA_sessions(sta, true); + ieee80211_sta_tear_down_BA_sessions( + sta, AGG_STOP_LOCAL_REQUEST); } mutex_unlock(&local->sta_mtx); } diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 738f9349c0a2..9d864ed5f3da 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -784,7 +784,7 @@ int __must_check __sta_info_destroy(struct sta_info *sta) * will be sufficient. */ set_sta_flag(sta, WLAN_STA_BLOCK_BA); - ieee80211_sta_tear_down_BA_sessions(sta, false); + ieee80211_sta_tear_down_BA_sessions(sta, AGG_STOP_DESTROY_STA); ret = sta_info_hash_del(local, sta); if (ret) diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 031e4a5bbeca..af7d78aa5523 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -92,6 +92,13 @@ enum ieee80211_sta_info_flags { #define HT_AGG_STATE_WANT_START 4 #define HT_AGG_STATE_WANT_STOP 5 +enum ieee80211_agg_stop_reason { + AGG_STOP_DECLINED, + AGG_STOP_LOCAL_REQUEST, + AGG_STOP_PEER_REQUEST, + AGG_STOP_DESTROY_STA, +}; + /** * struct tid_ampdu_tx - TID aggregation information (Tx). * diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e27c89c27bf4..1b9420730d8c 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1639,7 +1639,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) mutex_lock(&local->sta_mtx); list_for_each_entry(sta, &local->sta_list, list) { - ieee80211_sta_tear_down_BA_sessions(sta, true); + ieee80211_sta_tear_down_BA_sessions( + sta, AGG_STOP_LOCAL_REQUEST); clear_sta_flag(sta, WLAN_STA_BLOCK_BA); } -- cgit v1.2.3 From faec12ee2dd92edc09f75aab3d8c5085102052c5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jul 2012 14:12:44 +0200 Subject: mac80211: split out aggregation TX removal Create the function ieee80211_remove_tid_tx to call it from ___ieee80211_stop_tx_ba_session later. Signed-off-by: Johannes Berg --- net/mac80211/agg-tx.c | 48 ++++++++++++++++++++++++++++++------------------ 1 file changed, 30 insertions(+), 18 deletions(-) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index e0656d77b313..101bbfba9c8d 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -713,6 +713,35 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) } EXPORT_SYMBOL(ieee80211_stop_tx_ba_session); +static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid) +{ + struct tid_ampdu_tx *tid_tx; + + lockdep_assert_held(&sta->ampdu_mlme.mtx); + lockdep_assert_held(&sta->lock); + + tid_tx = rcu_dereference_protected_tid_tx(sta, tid); + + /* + * When we get here, the TX path will not be lockless any more wrt. + * aggregation, since the OPERATIONAL bit has long been cleared. + * Thus it will block on getting the lock, if it occurs. So if we + * stop the queue now, we will not get any more packets, and any + * that might be being processed will wait for us here, thereby + * guaranteeing that no packets go to the tid_tx pending queue any + * more. + */ + + ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid); + + /* future packets must not find the tid_tx struct any more */ + ieee80211_assign_tid_tx(sta, tid, NULL); + + ieee80211_agg_splice_finish(sta->sdata, tid); + + kfree_rcu(tid_tx, rcu_head); +} + void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); @@ -751,24 +780,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) ieee80211_send_delba(sta->sdata, ra, tid, WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE); - /* - * When we get here, the TX path will not be lockless any more wrt. - * aggregation, since the OPERATIONAL bit has long been cleared. - * Thus it will block on getting the lock, if it occurs. So if we - * stop the queue now, we will not get any more packets, and any - * that might be being processed will wait for us here, thereby - * guaranteeing that no packets go to the tid_tx pending queue any - * more. - */ - - ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid); - - /* future packets must not find the tid_tx struct any more */ - ieee80211_assign_tid_tx(sta, tid, NULL); - - ieee80211_agg_splice_finish(sta->sdata, tid); - - kfree_rcu(tid_tx, rcu_head); + ieee80211_remove_tid_tx(sta, tid); unlock_sta: spin_unlock_bh(&sta->lock); -- cgit v1.2.3 From 30bf5f1f433c7612857ed13c50525945c483dfe0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 09:43:03 +0100 Subject: mac80211: move ieee80211_remove_tid_tx function To call it from ___ieee80211_stop_tx_ba_session, move the function and dependencies up. Signed-off-by: Johannes Berg --- net/mac80211/agg-tx.c | 206 +++++++++++++++++++++++++------------------------- 1 file changed, 103 insertions(+), 103 deletions(-) diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 101bbfba9c8d..dda8d7df4b54 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -149,6 +149,109 @@ void ieee80211_assign_tid_tx(struct sta_info *sta, int tid, rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx); } +static inline int ieee80211_ac_from_tid(int tid) +{ + return ieee802_1d_to_ac[tid & 7]; +} + +/* + * When multiple aggregation sessions on multiple stations + * are being created/destroyed simultaneously, we need to + * refcount the global queue stop caused by that in order + * to not get into a situation where one of the aggregation + * setup or teardown re-enables queues before the other is + * ready to handle that. + * + * These two functions take care of this issue by keeping + * a global "agg_queue_stop" refcount. + */ +static void __acquires(agg_queue) +ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid) +{ + int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; + + if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1) + ieee80211_stop_queue_by_reason( + &sdata->local->hw, queue, + IEEE80211_QUEUE_STOP_REASON_AGGREGATION); + __acquire(agg_queue); +} + +static void __releases(agg_queue) +ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid) +{ + int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; + + if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0) + ieee80211_wake_queue_by_reason( + &sdata->local->hw, queue, + IEEE80211_QUEUE_STOP_REASON_AGGREGATION); + __release(agg_queue); +} + +/* + * splice packets from the STA's pending to the local pending, + * requires a call to ieee80211_agg_splice_finish later + */ +static void __acquires(agg_queue) +ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata, + struct tid_ampdu_tx *tid_tx, u16 tid) +{ + struct ieee80211_local *local = sdata->local; + int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; + unsigned long flags; + + ieee80211_stop_queue_agg(sdata, tid); + + if (WARN(!tid_tx, + "TID %d gone but expected when splicing aggregates from the pending queue\n", + tid)) + return; + + if (!skb_queue_empty(&tid_tx->pending)) { + spin_lock_irqsave(&local->queue_stop_reason_lock, flags); + /* copy over remaining packets */ + skb_queue_splice_tail_init(&tid_tx->pending, + &local->pending[queue]); + spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); + } +} + +static void __releases(agg_queue) +ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid) +{ + ieee80211_wake_queue_agg(sdata, tid); +} + +static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid) +{ + struct tid_ampdu_tx *tid_tx; + + lockdep_assert_held(&sta->ampdu_mlme.mtx); + lockdep_assert_held(&sta->lock); + + tid_tx = rcu_dereference_protected_tid_tx(sta, tid); + + /* + * When we get here, the TX path will not be lockless any more wrt. + * aggregation, since the OPERATIONAL bit has long been cleared. + * Thus it will block on getting the lock, if it occurs. So if we + * stop the queue now, we will not get any more packets, and any + * that might be being processed will wait for us here, thereby + * guaranteeing that no packets go to the tid_tx pending queue any + * more. + */ + + ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid); + + /* future packets must not find the tid_tx struct any more */ + ieee80211_assign_tid_tx(sta, tid, NULL); + + ieee80211_agg_splice_finish(sta->sdata, tid); + + kfree_rcu(tid_tx, rcu_head); +} + int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, enum ieee80211_agg_stop_reason reason) { @@ -265,80 +368,6 @@ static void sta_addba_resp_timer_expired(unsigned long data) rcu_read_unlock(); } -static inline int ieee80211_ac_from_tid(int tid) -{ - return ieee802_1d_to_ac[tid & 7]; -} - -/* - * When multiple aggregation sessions on multiple stations - * are being created/destroyed simultaneously, we need to - * refcount the global queue stop caused by that in order - * to not get into a situation where one of the aggregation - * setup or teardown re-enables queues before the other is - * ready to handle that. - * - * These two functions take care of this issue by keeping - * a global "agg_queue_stop" refcount. - */ -static void __acquires(agg_queue) -ieee80211_stop_queue_agg(struct ieee80211_sub_if_data *sdata, int tid) -{ - int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; - - if (atomic_inc_return(&sdata->local->agg_queue_stop[queue]) == 1) - ieee80211_stop_queue_by_reason( - &sdata->local->hw, queue, - IEEE80211_QUEUE_STOP_REASON_AGGREGATION); - __acquire(agg_queue); -} - -static void __releases(agg_queue) -ieee80211_wake_queue_agg(struct ieee80211_sub_if_data *sdata, int tid) -{ - int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; - - if (atomic_dec_return(&sdata->local->agg_queue_stop[queue]) == 0) - ieee80211_wake_queue_by_reason( - &sdata->local->hw, queue, - IEEE80211_QUEUE_STOP_REASON_AGGREGATION); - __release(agg_queue); -} - -/* - * splice packets from the STA's pending to the local pending, - * requires a call to ieee80211_agg_splice_finish later - */ -static void __acquires(agg_queue) -ieee80211_agg_splice_packets(struct ieee80211_sub_if_data *sdata, - struct tid_ampdu_tx *tid_tx, u16 tid) -{ - struct ieee80211_local *local = sdata->local; - int queue = sdata->vif.hw_queue[ieee80211_ac_from_tid(tid)]; - unsigned long flags; - - ieee80211_stop_queue_agg(sdata, tid); - - if (WARN(!tid_tx, - "TID %d gone but expected when splicing aggregates from the pending queue\n", - tid)) - return; - - if (!skb_queue_empty(&tid_tx->pending)) { - spin_lock_irqsave(&local->queue_stop_reason_lock, flags); - /* copy over remaining packets */ - skb_queue_splice_tail_init(&tid_tx->pending, - &local->pending[queue]); - spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); - } -} - -static void __releases(agg_queue) -ieee80211_agg_splice_finish(struct ieee80211_sub_if_data *sdata, u16 tid) -{ - ieee80211_wake_queue_agg(sdata, tid); -} - void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid) { struct tid_ampdu_tx *tid_tx; @@ -713,35 +742,6 @@ int ieee80211_stop_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid) } EXPORT_SYMBOL(ieee80211_stop_tx_ba_session); -static void ieee80211_remove_tid_tx(struct sta_info *sta, int tid) -{ - struct tid_ampdu_tx *tid_tx; - - lockdep_assert_held(&sta->ampdu_mlme.mtx); - lockdep_assert_held(&sta->lock); - - tid_tx = rcu_dereference_protected_tid_tx(sta, tid); - - /* - * When we get here, the TX path will not be lockless any more wrt. - * aggregation, since the OPERATIONAL bit has long been cleared. - * Thus it will block on getting the lock, if it occurs. So if we - * stop the queue now, we will not get any more packets, and any - * that might be being processed will wait for us here, thereby - * guaranteeing that no packets go to the tid_tx pending queue any - * more. - */ - - ieee80211_agg_splice_packets(sta->sdata, tid_tx, tid); - - /* future packets must not find the tid_tx struct any more */ - ieee80211_assign_tid_tx(sta, tid, NULL); - - ieee80211_agg_splice_finish(sta->sdata, tid); - - kfree_rcu(tid_tx, rcu_head); -} - void ieee80211_stop_tx_ba_cb(struct ieee80211_vif *vif, u8 *ra, u8 tid) { struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); -- cgit v1.2.3 From 18b559d5db47c86b10c14590aa2d26c0243c39e4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jul 2012 13:51:25 +0200 Subject: mac80211: split TX aggregation stop action When TX aggregation is stopped, there are a few different cases: - connection with the peer was dropped - session stop was requested locally - session stop was requested by the peer - connection was dropped while a session is stopping The behaviour in these cases should be different, if the connection is dropped then the driver should drop all frames, otherwise the frames may continue to be transmitted, aggregated in the case of a locally requested session stop or unaggregated in the case of the peer requesting session stop. Split these different cases so that the driver can act accordingly; however, treat local and remote stop the same way and ask the driver to not send frames as aggregated packets any more. In the case of connection drop, the stop callback the driver is otherwise supposed to call is no longer required. Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 4 ++- drivers/net/wireless/ath/ath9k/main.c | 4 ++- drivers/net/wireless/ath/carl9170/main.c | 4 ++- .../net/wireless/brcm80211/brcmsmac/mac80211_if.c | 4 ++- drivers/net/wireless/iwlegacy/4965-mac.c | 4 ++- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 4 ++- drivers/net/wireless/mac80211_hwsim.c | 4 ++- drivers/net/wireless/mwl8k.c | 4 ++- drivers/net/wireless/rt2x00/rt2800lib.c | 4 ++- drivers/net/wireless/rtlwifi/core.c | 4 ++- drivers/net/wireless/ti/wlcore/main.c | 4 ++- include/net/mac80211.h | 22 +++++++++--- net/mac80211/agg-tx.c | 40 +++++++++++++++++++--- 13 files changed, 85 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 9c07a8fa5134..a8016d70088a 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1628,7 +1628,9 @@ static int ath9k_htc_ampdu_action(struct ieee80211_hw *hw, if (!ret) ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: ath9k_htc_tx_aggr_oper(priv, vif, sta, action, tid); ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index be30a9af1528..e1fa70596e61 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1610,7 +1610,9 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); ath9k_ps_restore(sc); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: ath9k_ps_wakeup(sc); ath_tx_aggr_stop(sc, sta, tid); ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 25a1e2f4f738..9d2051aeb782 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1394,7 +1394,9 @@ static int carl9170_op_ampdu_action(struct ieee80211_hw *hw, ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: rcu_read_lock(); tid_info = rcu_dereference(sta_info->agg[tid]); if (tid_info) { diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 1fbd8ecbe2ea..f0fc8cd4d5df 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -668,7 +668,9 @@ brcms_ops_ampdu_action(struct ieee80211_hw *hw, ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: spin_lock_bh(&wl->lock); brcms_c_ampdu_flush(wl->wlc, sta, tid); spin_unlock_bh(&wl->lock); diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index c3fbf6717564..6a86ed45835d 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5968,7 +5968,9 @@ il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, D_HT("start Tx\n"); ret = il4965_tx_agg_start(il, vif, sta, tid, ssn); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: D_HT("stop Tx\n"); ret = il4965_tx_agg_stop(il, vif, sta, tid); if (test_bit(S_EXIT_PENDING, &il->status)) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 3163e0f38c25..02fdcea76b21 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -679,7 +679,9 @@ static int iwlagn_mac_ampdu_action(struct ieee80211_hw *hw, IWL_DEBUG_HT(priv, "start Tx\n"); ret = iwlagn_tx_agg_start(priv, vif, sta, tid, ssn); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: IWL_DEBUG_HT(priv, "stop Tx\n"); ret = iwlagn_tx_agg_stop(priv, vif, sta, tid); if ((ret == 0) && (priv->agg_tids_count > 0)) { diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 145498f8411f..d248a4cc6656 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1312,7 +1312,9 @@ static int mac80211_hwsim_ampdu_action(struct ieee80211_hw *hw, case IEEE80211_AMPDU_TX_START: ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; case IEEE80211_AMPDU_TX_OPERATIONAL: diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index f221b95b90b3..19b46fdf9f0f 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -5170,7 +5170,9 @@ mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } ieee80211_start_tx_ba_cb_irqsafe(vif, addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: if (stream) { if (stream->state == AMPDU_STREAM_ACTIVE) { spin_unlock(&priv->stream_lock); diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 197b4466a5d2..12f93e42e160 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -5484,7 +5484,9 @@ int rt2800_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, case IEEE80211_AMPDU_TX_START: ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid); break; case IEEE80211_AMPDU_TX_OPERATIONAL: diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c index be33aa14c8af..d3ce9fbef00e 100644 --- a/drivers/net/wireless/rtlwifi/core.c +++ b/drivers/net/wireless/rtlwifi/core.c @@ -879,7 +879,9 @@ static int rtl_op_ampdu_action(struct ieee80211_hw *hw, "IEEE80211_AMPDU_TX_START: TID:%d\n", tid); return rtl_tx_agg_start(hw, sta, tid, ssn); break; - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, "IEEE80211_AMPDU_TX_STOP: TID:%d\n", tid); return rtl_tx_agg_stop(hw, sta, tid); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index ea9d8e011bc9..d7de06359ae1 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -4575,7 +4575,9 @@ static int wl1271_op_ampdu_action(struct ieee80211_hw *hw, * Falling break here on purpose for all TX APDU commands. */ case IEEE80211_AMPDU_TX_START: - case IEEE80211_AMPDU_TX_STOP: + case IEEE80211_AMPDU_TX_STOP_CONT: + case IEEE80211_AMPDU_TX_STOP_FLUSH: + case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: case IEEE80211_AMPDU_TX_OPERATIONAL: ret = -EINVAL; break; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0978b0faa880..a464f4fb36a0 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2033,17 +2033,29 @@ enum ieee80211_filter_flags { * calling ieee80211_start_tx_ba_cb_irqsafe, because the peer * might receive the addBA frame and send a delBA right away! * - * @IEEE80211_AMPDU_RX_START: start Rx aggregation - * @IEEE80211_AMPDU_RX_STOP: stop Rx aggregation - * @IEEE80211_AMPDU_TX_START: start Tx aggregation - * @IEEE80211_AMPDU_TX_STOP: stop Tx aggregation + * @IEEE80211_AMPDU_RX_START: start RX aggregation + * @IEEE80211_AMPDU_RX_STOP: stop RX aggregation + * @IEEE80211_AMPDU_TX_START: start TX aggregation * @IEEE80211_AMPDU_TX_OPERATIONAL: TX aggregation has become operational + * @IEEE80211_AMPDU_TX_STOP_CONT: stop TX aggregation but continue transmitting + * queued packets, now unaggregated. After all packets are transmitted the + * driver has to call ieee80211_stop_tx_ba_cb_irqsafe(). + * @IEEE80211_AMPDU_TX_STOP_FLUSH: stop TX aggregation and flush all packets, + * called when the station is removed. There's no need or reason to call + * ieee80211_stop_tx_ba_cb_irqsafe() in this case as mac80211 assumes the + * session is gone and removes the station. + * @IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: called when TX aggregation is stopped + * but the driver hasn't called ieee80211_stop_tx_ba_cb_irqsafe() yet and + * now the connection is dropped and the station will be removed. Drivers + * should clean up and drop remaining packets when this is called. */ enum ieee80211_ampdu_mlme_action { IEEE80211_AMPDU_RX_START, IEEE80211_AMPDU_RX_STOP, IEEE80211_AMPDU_TX_START, - IEEE80211_AMPDU_TX_STOP, + IEEE80211_AMPDU_TX_STOP_CONT, + IEEE80211_AMPDU_TX_STOP_FLUSH, + IEEE80211_AMPDU_TX_STOP_FLUSH_CONT, IEEE80211_AMPDU_TX_OPERATIONAL, }; diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index dda8d7df4b54..2f0ccbc5f13e 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -257,10 +257,25 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, { struct ieee80211_local *local = sta->local; struct tid_ampdu_tx *tid_tx; + enum ieee80211_ampdu_mlme_action action; int ret; lockdep_assert_held(&sta->ampdu_mlme.mtx); + switch (reason) { + case AGG_STOP_DECLINED: + case AGG_STOP_LOCAL_REQUEST: + case AGG_STOP_PEER_REQUEST: + action = IEEE80211_AMPDU_TX_STOP_CONT; + break; + case AGG_STOP_DESTROY_STA: + action = IEEE80211_AMPDU_TX_STOP_FLUSH; + break; + default: + WARN_ON_ONCE(1); + return -EINVAL; + } + spin_lock_bh(&sta->lock); tid_tx = rcu_dereference_protected_tid_tx(sta, tid); @@ -269,10 +284,19 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, return -ENOENT; } - /* if we're already stopping ignore any new requests to stop */ + /* + * if we're already stopping ignore any new requests to stop + * unless we're destroying it in which case notify the driver + */ if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) { spin_unlock_bh(&sta->lock); - return -EALREADY; + if (reason != AGG_STOP_DESTROY_STA) + return -EALREADY; + ret = drv_ampdu_action(local, sta->sdata, + IEEE80211_AMPDU_TX_STOP_FLUSH_CONT, + &sta->sta, tid, NULL, 0); + WARN_ON_ONCE(ret); + goto remove_tid_tx; } if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { @@ -319,8 +343,7 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, WLAN_BACK_INITIATOR; tid_tx->tx_stop = reason == AGG_STOP_LOCAL_REQUEST; - ret = drv_ampdu_action(local, sta->sdata, - IEEE80211_AMPDU_TX_STOP, + ret = drv_ampdu_action(local, sta->sdata, action, &sta->sta, tid, NULL, 0); /* HW shall not deny going back to legacy */ @@ -331,7 +354,14 @@ int ___ieee80211_stop_tx_ba_session(struct sta_info *sta, u16 tid, */ } - return ret; + if (reason == AGG_STOP_DESTROY_STA) { + remove_tid_tx: + spin_lock_bh(&sta->lock); + ieee80211_remove_tid_tx(sta, tid); + spin_unlock_bh(&sta->lock); + } + + return 0; } /* -- cgit v1.2.3 From 598a5938e04ce30d837dca4c3c3326c69435342a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 12:00:40 +0100 Subject: wireless: use __packed in ieee80211.h Use __packed instead of __attribute__((packed)). Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 84 +++++++++++++++++++++++------------------------ 1 file changed, 42 insertions(+), 42 deletions(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 09879eb24380..5db76ebe8810 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -180,7 +180,7 @@ struct ieee80211_hdr { u8 addr3[6]; __le16 seq_ctrl; u8 addr4[6]; -} __attribute__ ((packed)); +} __packed; struct ieee80211_hdr_3addr { __le16 frame_control; @@ -189,7 +189,7 @@ struct ieee80211_hdr_3addr { u8 addr2[6]; u8 addr3[6]; __le16 seq_ctrl; -} __attribute__ ((packed)); +} __packed; struct ieee80211_qos_hdr { __le16 frame_control; @@ -199,7 +199,7 @@ struct ieee80211_qos_hdr { u8 addr3[6]; __le16 seq_ctrl; __le16 qos_ctrl; -} __attribute__ ((packed)); +} __packed; /** * ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set @@ -576,7 +576,7 @@ struct ieee80211s_hdr { __le32 seqnum; u8 eaddr1[6]; u8 eaddr2[6]; -} __attribute__ ((packed)); +} __packed; /* Mesh flags */ #define MESH_FLAGS_AE_A4 0x1 @@ -614,7 +614,7 @@ struct ieee80211_quiet_ie { u8 period; __le16 duration; __le16 offset; -} __attribute__ ((packed)); +} __packed; /** * struct ieee80211_msrment_ie @@ -626,7 +626,7 @@ struct ieee80211_msrment_ie { u8 mode; u8 type; u8 request[0]; -} __attribute__ ((packed)); +} __packed; /** * struct ieee80211_channel_sw_ie @@ -637,7 +637,7 @@ struct ieee80211_channel_sw_ie { u8 mode; u8 new_ch_num; u8 count; -} __attribute__ ((packed)); +} __packed; /** * struct ieee80211_tim @@ -650,7 +650,7 @@ struct ieee80211_tim_ie { u8 bitmap_ctrl; /* variable size: 1 - 251 bytes */ u8 virtual_map[1]; -} __attribute__ ((packed)); +} __packed; /** * struct ieee80211_meshconf_ie @@ -665,7 +665,7 @@ struct ieee80211_meshconf_ie { u8 meshconf_auth; u8 meshconf_form; u8 meshconf_cap; -} __attribute__ ((packed)); +} __packed; /** * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags @@ -695,7 +695,7 @@ struct ieee80211_rann_ie { __le32 rann_seq; __le32 rann_interval; __le32 rann_metric; -} __attribute__ ((packed)); +} __packed; enum ieee80211_rann_flags { RANN_FLAG_IS_GATE = 1 << 0, @@ -717,33 +717,33 @@ struct ieee80211_mgmt { __le16 status_code; /* possibly followed by Challenge text */ u8 variable[0]; - } __attribute__ ((packed)) auth; + } __packed auth; struct { __le16 reason_code; - } __attribute__ ((packed)) deauth; + } __packed deauth; struct { __le16 capab_info; __le16 listen_interval; /* followed by SSID and Supported rates */ u8 variable[0]; - } __attribute__ ((packed)) assoc_req; + } __packed assoc_req; struct { __le16 capab_info; __le16 status_code; __le16 aid; /* followed by Supported rates */ u8 variable[0]; - } __attribute__ ((packed)) assoc_resp, reassoc_resp; + } __packed assoc_resp, reassoc_resp; struct { __le16 capab_info; __le16 listen_interval; u8 current_ap[6]; /* followed by SSID and Supported rates */ u8 variable[0]; - } __attribute__ ((packed)) reassoc_req; + } __packed reassoc_req; struct { __le16 reason_code; - } __attribute__ ((packed)) disassoc; + } __packed disassoc; struct { __le64 timestamp; __le16 beacon_int; @@ -751,11 +751,11 @@ struct ieee80211_mgmt { /* followed by some of SSID, Supported rates, * FH Params, DS Params, CF Params, IBSS Params, TIM */ u8 variable[0]; - } __attribute__ ((packed)) beacon; + } __packed beacon; struct { /* only variable items: SSID, Supported rates */ u8 variable[0]; - } __attribute__ ((packed)) probe_req; + } __packed probe_req; struct { __le64 timestamp; __le16 beacon_int; @@ -763,7 +763,7 @@ struct ieee80211_mgmt { /* followed by some of SSID, Supported rates, * FH Params, DS Params, CF Params, IBSS Params */ u8 variable[0]; - } __attribute__ ((packed)) probe_resp; + } __packed probe_resp; struct { u8 category; union { @@ -772,55 +772,55 @@ struct ieee80211_mgmt { u8 dialog_token; u8 status_code; u8 variable[0]; - } __attribute__ ((packed)) wme_action; + } __packed wme_action; struct{ u8 action_code; u8 element_id; u8 length; struct ieee80211_channel_sw_ie sw_elem; - } __attribute__((packed)) chan_switch; + } __packed chan_switch; struct{ u8 action_code; u8 dialog_token; u8 element_id; u8 length; struct ieee80211_msrment_ie msr_elem; - } __attribute__((packed)) measurement; + } __packed measurement; struct{ u8 action_code; u8 dialog_token; __le16 capab; __le16 timeout; __le16 start_seq_num; - } __attribute__((packed)) addba_req; + } __packed addba_req; struct{ u8 action_code; u8 dialog_token; __le16 status; __le16 capab; __le16 timeout; - } __attribute__((packed)) addba_resp; + } __packed addba_resp; struct{ u8 action_code; __le16 params; __le16 reason_code; - } __attribute__((packed)) delba; + } __packed delba; struct { u8 action_code; u8 variable[0]; - } __attribute__((packed)) self_prot; + } __packed self_prot; struct{ u8 action_code; u8 variable[0]; - } __attribute__((packed)) mesh_action; + } __packed mesh_action; struct { u8 action; u8 trans_id[WLAN_SA_QUERY_TR_ID_LEN]; - } __attribute__ ((packed)) sa_query; + } __packed sa_query; struct { u8 action; u8 smps_control; - } __attribute__ ((packed)) ht_smps; + } __packed ht_smps; struct { u8 action_code; u8 dialog_token; @@ -828,9 +828,9 @@ struct ieee80211_mgmt { u8 variable[0]; } __packed tdls_discover_resp; } u; - } __attribute__ ((packed)) action; + } __packed action; } u; -} __attribute__ ((packed)); +} __packed; /* Supported Rates value encodings in 802.11n-2009 7.3.2.2 */ #define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127 @@ -846,7 +846,7 @@ struct ieee80211_mmie { __le16 key_id; u8 sequence_number[6]; u8 mic[8]; -} __attribute__ ((packed)); +} __packed; struct ieee80211_vendor_ie { u8 element_id; @@ -861,20 +861,20 @@ struct ieee80211_rts { __le16 duration; u8 ra[6]; u8 ta[6]; -} __attribute__ ((packed)); +} __packed; struct ieee80211_cts { __le16 frame_control; __le16 duration; u8 ra[6]; -} __attribute__ ((packed)); +} __packed; struct ieee80211_pspoll { __le16 frame_control; __le16 aid; u8 bssid[6]; u8 ta[6]; -} __attribute__ ((packed)); +} __packed; /* TDLS */ @@ -967,7 +967,7 @@ struct ieee80211_bar { __u8 ta[6]; __le16 control; __le16 start_seq_num; -} __attribute__((packed)); +} __packed; /* 802.11 BAR control masks */ #define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 @@ -992,7 +992,7 @@ struct ieee80211_mcs_info { __le16 rx_highest; u8 tx_params; u8 reserved[3]; -} __attribute__((packed)); +} __packed; /* 802.11n HT capability MSC set */ #define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff @@ -1031,7 +1031,7 @@ struct ieee80211_ht_cap { __le16 extended_ht_cap_info; __le32 tx_BF_cap_info; u8 antenna_selection_info; -} __attribute__ ((packed)); +} __packed; /* 802.11n HT capabilities masks (for cap_info) */ #define IEEE80211_HT_CAP_LDPC_CODING 0x0001 @@ -1102,7 +1102,7 @@ struct ieee80211_ht_operation { __le16 operation_mode; __le16 stbc_param; u8 basic_set[16]; -} __attribute__ ((packed)); +} __packed; /* for ht_param */ #define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03 @@ -1839,14 +1839,14 @@ struct ieee80211_country_ie_triplet { u8 first_channel; u8 num_channels; s8 max_power; - } __attribute__ ((packed)) chans; + } __packed chans; struct { u8 reg_extension_id; u8 reg_class; u8 coverage_class; - } __attribute__ ((packed)) ext; + } __packed ext; }; -} __attribute__ ((packed)); +} __packed; enum ieee80211_timeout_interval_type { WLAN_TIMEOUT_REASSOC_DEADLINE = 1 /* 802.11r */, -- cgit v1.2.3 From ec61cd63dd3f3bf982180b2bcc1b325160d73837 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 12:12:10 +0100 Subject: mac80211: support HT notify channel width action Support the HT notify channel width action frame to update the rate scaling about the bandwidth the peer can receive in. Signed-off-by: Johannes Berg --- include/linux/ieee80211.h | 9 +++++++++ net/mac80211/rx.c | 31 ++++++++++++++++++++++++++++++- 2 files changed, 39 insertions(+), 1 deletion(-) diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 5db76ebe8810..ccf9ee1dca8c 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -701,6 +701,11 @@ enum ieee80211_rann_flags { RANN_FLAG_IS_GATE = 1 << 0, }; +enum ieee80211_ht_chanwidth_values { + IEEE80211_HT_CHANWIDTH_20MHZ = 0, + IEEE80211_HT_CHANWIDTH_ANY = 1, +}; + #define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { @@ -821,6 +826,10 @@ struct ieee80211_mgmt { u8 action; u8 smps_control; } __packed ht_smps; + struct { + u8 action_code; + u8 chanwidth; + } __packed ht_notify_cw; struct { u8 action_code; u8 dialog_token; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 580704eba8b8..a19089565c4b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2353,7 +2353,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) sdata->vif.type != NL80211_IFTYPE_ADHOC) break; - /* verify action & smps_control are present */ + /* verify action & smps_control/chanwidth are present */ if (len < IEEE80211_MIN_ACTION_SIZE + 2) goto invalid; @@ -2392,6 +2392,35 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) IEEE80211_RC_SMPS_CHANGED); goto handled; } + case WLAN_HT_ACTION_NOTIFY_CHANWIDTH: { + struct ieee80211_supported_band *sband; + u8 chanwidth = mgmt->u.action.u.ht_notify_cw.chanwidth; + bool old_40mhz, new_40mhz; + + /* If it doesn't support 40 MHz it can't change ... */ + if (!rx->sta->supports_40mhz) + goto handled; + + old_40mhz = rx->sta->sta.ht_cap.cap & + IEEE80211_HT_CAP_SUP_WIDTH_20_40; + new_40mhz = chanwidth == IEEE80211_HT_CHANWIDTH_ANY; + + if (old_40mhz == new_40mhz) + goto handled; + + if (new_40mhz) + rx->sta->sta.ht_cap.cap |= + IEEE80211_HT_CAP_SUP_WIDTH_20_40; + else + rx->sta->sta.ht_cap.cap &= + ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + + sband = rx->local->hw.wiphy->bands[status->band]; + + rate_control_rate_update(local, sband, rx->sta, + IEEE80211_RC_BW_CHANGED); + goto handled; + } default: goto invalid; } -- cgit v1.2.3 From 1c06ef9831c78648f719a174e4598ae2600b0cf7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 12:22:02 +0100 Subject: wireless: use __aligned Use __aligned(...) instead of __attribute__((aligned(...))) in mac80211 and cfg80211. Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++-- include/net/mac80211.h | 6 +++--- net/wireless/core.h | 2 +- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 1f74360b527c..e5f085c89221 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1256,7 +1256,7 @@ struct cfg80211_bss { u8 bssid[ETH_ALEN]; - u8 priv[0] __attribute__((__aligned__(sizeof(void *)))); + u8 priv[0] __aligned(sizeof(void *)); }; /** @@ -2392,7 +2392,7 @@ struct wiphy { const struct iw_handler_def *wext; #endif - char priv[0] __attribute__((__aligned__(NETDEV_ALIGN))); + char priv[0] __aligned(NETDEV_ALIGN); }; static inline struct net *wiphy_net(struct wiphy *wiphy) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a464f4fb36a0..23daed3c78ed 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -173,7 +173,7 @@ struct ieee80211_chanctx_conf { u8 rx_chains_static, rx_chains_dynamic; - u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); + u8 drv_priv[0] __aligned(sizeof(void *)); }; /** @@ -1059,7 +1059,7 @@ struct ieee80211_vif { u32 driver_flags; /* must be last */ - u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); + u8 drv_priv[0] __aligned(sizeof(void *)); }; static inline bool ieee80211_vif_is_mesh(struct ieee80211_vif *vif) @@ -1209,7 +1209,7 @@ struct ieee80211_sta { u8 max_sp; /* must be last */ - u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); + u8 drv_priv[0] __aligned(sizeof(void *)); }; /** diff --git a/net/wireless/core.h b/net/wireless/core.h index b8f4630c6ada..f342267e3620 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -89,7 +89,7 @@ struct cfg80211_registered_device { /* must be last because of the way we do wiphy_priv(), * and it should at least be aligned to NETDEV_ALIGN */ - struct wiphy wiphy __attribute__((__aligned__(NETDEV_ALIGN))); + struct wiphy wiphy __aligned(NETDEV_ALIGN); }; static inline -- cgit v1.2.3 From 21add825f90a50407e0121833c8b7cd2c071c478 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 15:01:57 +0100 Subject: mac80211: unset peer's HT 40 MHz support if not usable When an interface is configured to a 20 MHz channel and the device as well as the peer are 40 MHz capable the HT capabilities of the peer are not restricted to 20 MHz, even though they're supposed to be restricted to the currently possible capabilities. Unset the 40 MHz HT capability bits in this case. Signed-off-by: Johannes Berg --- net/mac80211/ht.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index df46cd8e55f5..61ac7c48ac0c 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -120,6 +120,21 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_DSSSCCK40)); + + /* Unset 40 MHz if we're not using a 40 MHz channel */ + switch (sdata->vif.bss_conf.chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + ht_cap->cap &= ~IEEE80211_HT_CAP_SGI_40; + ht_cap->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + break; + case NL80211_CHAN_WIDTH_40: + case NL80211_CHAN_WIDTH_80: + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + break; + } + /* * The STBC bits are asymmetric -- if we don't have * TX then mask out the peer's RX and vice versa. -- cgit v1.2.3 From ba23d2068d85f6616ea5f92320c04e87d4b9e141 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 17:32:09 +0100 Subject: cfg80211: disallow more station changes The following changes are invalid and should be disallowed when a station already exists: * supported rates changes, except for TDLS peers * listen interval changes * HT capability changes Disallow them and also update a mac80211 comment explaining how they would be racy. Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 9 +++++---- net/wireless/nl80211.c | 22 ++++++++-------------- 2 files changed, 13 insertions(+), 18 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index f4d12c71928d..7d290bce0927 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1208,10 +1208,11 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->sta.aid = params->aid; /* - * FIXME: updating the following information is racy when this - * function is called from ieee80211_change_station(). - * However, all this information should be static so - * maybe we should just reject attemps to change it. + * Some of the following updates would be racy if called on an + * existing station, via ieee80211_change_station(). However, + * all such changes are rejected by cfg80211 except for updates + * changing the supported rates on an existing but not yet used + * TDLS peer. */ if (params->listen_interval >= 0) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 087f68ba6d7a..9bd8340af999 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3188,13 +3188,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]); } - if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]) - params.listen_interval = - nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]); - - if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) - params.ht_capa = - nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]); + if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL] || + info->attrs[NL80211_ATTR_HT_CAPABILITY]) + return -EINVAL; if (!rdev->ops->change_station) return -EOPNOTSUPP; @@ -3246,6 +3242,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) BIT(NL80211_STA_FLAG_ASSOCIATED))) return -EINVAL; + /* reject other things that can't change */ + if (params.supported_rates) + return -EINVAL; + /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); if (IS_ERR(params.vlan)) @@ -3265,10 +3265,6 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* disallow things sta doesn't support */ if (params.plink_action) return -EINVAL; - if (params.ht_capa) - return -EINVAL; - if (params.listen_interval >= 0) - return -EINVAL; /* reject any changes other than AUTHORIZED */ if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED)) return -EINVAL; @@ -3277,9 +3273,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* disallow things mesh doesn't support */ if (params.vlan) return -EINVAL; - if (params.ht_capa) - return -EINVAL; - if (params.listen_interval >= 0) + if (params.supported_rates) return -EINVAL; /* * No special handling for TDLS here -- the userspace -- cgit v1.2.3 From 046db346386661906dffa33f5ed3dfcdccfddc0b Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 5 Dec 2012 15:07:54 +0200 Subject: iwlwifi: make the BC table layout configurable This is needed for newer NICs. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-trans.h | 3 +++ drivers/net/wireless/iwlwifi/pcie/internal.h | 2 ++ drivers/net/wireless/iwlwifi/pcie/trans.c | 1 + drivers/net/wireless/iwlwifi/pcie/tx.c | 5 ++++- 4 files changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index b76532e238c1..15b4700d2a2f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -321,6 +321,8 @@ static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) * @n_no_reclaim_cmds: # of commands in list * @rx_buf_size_8k: 8 kB RX buffer size needed for A-MSDUs, * if unset 4k will be the RX buffer size + * @bc_table_dword: set to true if the BC table expects the byte count to be + * in DWORD (as opposed to bytes) * @queue_watchdog_timeout: time (in ms) after which queues * are considered stuck and will trigger device restart * @command_names: array of command names, must be 256 entries @@ -335,6 +337,7 @@ struct iwl_trans_config { int n_no_reclaim_cmds; bool rx_buf_size_8k; + bool bc_table_dword; unsigned int queue_watchdog_timeout; const char **command_names; }; diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index d91d2e8c62f5..15f79754b67b 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -234,6 +234,7 @@ struct iwl_txq { * @status - transport specific status flags * @cmd_queue - command queue number * @rx_buf_size_8k: 8 kB RX buffer size + * @bc_table_dword: true if the BC table expects DWORD (as opposed to bytes) * @rx_page_order: page order for receive buffer size * @wd_timeout: queue watchdog timeout (jiffies) */ @@ -279,6 +280,7 @@ struct iwl_trans_pcie { u8 no_reclaim_cmds[MAX_NO_RECLAIM_CMDS]; bool rx_buf_size_8k; + bool bc_table_dword; u32 rx_page_order; const char **command_names; diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 35708b959ad6..ab179ce36de5 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -703,6 +703,7 @@ static void iwl_trans_pcie_configure(struct iwl_trans *trans, msecs_to_jiffies(trans_cfg->queue_watchdog_timeout); trans_pcie->command_names = trans_cfg->command_names; + trans_pcie->bc_table_dword = trans_cfg->bc_table_dword; } void iwl_trans_pcie_free(struct iwl_trans *trans) diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 6c5b867c353a..7af8f0b55d2d 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -237,7 +237,10 @@ static void iwl_pcie_txq_update_byte_cnt_tbl(struct iwl_trans *trans, break; } - bc_ent = cpu_to_le16((len & 0xFFF) | (sta_id << 12)); + if (trans_pcie->bc_table_dword) + len = DIV_ROUND_UP(len, 4); + + bc_ent = cpu_to_le16(len | (sta_id << 12)); scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent; -- cgit v1.2.3 From da58eefa6d16281c063eba6467690325bfb5f372 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 18 Dec 2012 10:47:28 +0200 Subject: iwlwifi: clean up code in AGG If we take a pointer to the tid_data, then use it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/tx.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index da21328ca8ed..df76881385ae 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -541,9 +541,9 @@ int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, spin_lock_bh(&priv->sta_lock); tid_data = &priv->tid_data[sta_id][tid]; - txq_id = priv->tid_data[sta_id][tid].agg.txq_id; + txq_id = tid_data->agg.txq_id; - switch (priv->tid_data[sta_id][tid].agg.state) { + switch (tid_data->agg.state) { case IWL_EMPTYING_HW_QUEUE_ADDBA: /* * This can happen if the peer stops aggregation @@ -563,9 +563,9 @@ int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, case IWL_AGG_ON: break; default: - IWL_WARN(priv, "Stopping AGG while state not ON " - "or starting for %d on %d (%d)\n", sta_id, tid, - priv->tid_data[sta_id][tid].agg.state); + IWL_WARN(priv, + "Stopping AGG while state not ON or starting for %d on %d (%d)\n", + sta_id, tid, tid_data->agg.state); spin_unlock_bh(&priv->sta_lock); return 0; } @@ -578,12 +578,11 @@ int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, "stopping AGG on STA/TID %d/%d but hwq %d not used\n", sta_id, tid, txq_id); } else if (tid_data->agg.ssn != tid_data->next_reclaimed) { - IWL_DEBUG_TX_QUEUES(priv, "Can't proceed: ssn %d, " - "next_recl = %d\n", + IWL_DEBUG_TX_QUEUES(priv, + "Can't proceed: ssn %d, next_recl = %d\n", tid_data->agg.ssn, tid_data->next_reclaimed); - priv->tid_data[sta_id][tid].agg.state = - IWL_EMPTYING_HW_QUEUE_DELBA; + tid_data->agg.state = IWL_EMPTYING_HW_QUEUE_DELBA; spin_unlock_bh(&priv->sta_lock); return 0; } @@ -591,8 +590,8 @@ int iwlagn_tx_agg_stop(struct iwl_priv *priv, struct ieee80211_vif *vif, IWL_DEBUG_TX_QUEUES(priv, "Can proceed: ssn = next_recl = %d\n", tid_data->agg.ssn); turn_off: - agg_state = priv->tid_data[sta_id][tid].agg.state; - priv->tid_data[sta_id][tid].agg.state = IWL_AGG_OFF; + agg_state = tid_data->agg.state; + tid_data->agg.state = IWL_AGG_OFF; spin_unlock_bh(&priv->sta_lock); -- cgit v1.2.3 From d28cbdef8cb7ea04d5ef7c9d7b14df0751560522 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Dec 2012 16:51:22 +0200 Subject: iwlwifi: don't verify fw after download No need to verify that the fw has been written correctly. In case it hasn't, we won't get ALIVE notification. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/ucode.c | 94 -------------------------------- 1 file changed, 94 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c index c6467e5554f5..ecf700bf9842 100644 --- a/drivers/net/wireless/iwlwifi/dvm/ucode.c +++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c @@ -286,89 +286,6 @@ static int iwl_alive_notify(struct iwl_priv *priv) return iwl_send_calib_results(priv); } - -/** - * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, - * using sample data 100 bytes apart. If these sample points are good, - * it's a pretty good bet that everything between them is good, too. - */ -static int iwl_verify_sec_sparse(struct iwl_priv *priv, - const struct fw_desc *fw_desc) -{ - __le32 *image = (__le32 *)fw_desc->data; - u32 len = fw_desc->len; - u32 val; - u32 i; - - IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len); - - for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { - /* read data comes through single port, auto-incr addr */ - /* NOTE: Use the debugless read so we don't flood kernel log - * if IWL_DL_IO is set */ - iwl_write_direct32(priv->trans, HBUS_TARG_MEM_RADDR, - i + fw_desc->offset); - val = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) - return -EIO; - } - - return 0; -} - -static void iwl_print_mismatch_sec(struct iwl_priv *priv, - const struct fw_desc *fw_desc) -{ - __le32 *image = (__le32 *)fw_desc->data; - u32 len = fw_desc->len; - u32 val; - u32 offs; - int errors = 0; - - IWL_DEBUG_FW(priv, "ucode inst image size is %u\n", len); - - iwl_write_direct32(priv->trans, HBUS_TARG_MEM_RADDR, - fw_desc->offset); - - for (offs = 0; - offs < len && errors < 20; - offs += sizeof(u32), image++) { - /* read data comes through single port, auto-incr addr */ - val = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); - if (val != le32_to_cpu(*image)) { - IWL_ERR(priv, "uCode INST section at " - "offset 0x%x, is 0x%x, s/b 0x%x\n", - offs, val, le32_to_cpu(*image)); - errors++; - } - } -} - -/** - * iwl_verify_ucode - determine which instruction image is in SRAM, - * and verify its contents - */ -static int iwl_verify_ucode(struct iwl_priv *priv, - enum iwl_ucode_type ucode_type) -{ - const struct fw_img *img = iwl_get_ucode_image(priv, ucode_type); - - if (!img) { - IWL_ERR(priv, "Invalid ucode requested (%d)\n", ucode_type); - return -EINVAL; - } - - if (!iwl_verify_sec_sparse(priv, &img->sec[IWL_UCODE_SECTION_INST])) { - IWL_DEBUG_FW(priv, "uCode is good in inst SRAM\n"); - return 0; - } - - IWL_ERR(priv, "UCODE IMAGE IN INSTRUCTION SRAM NOT VALID!!\n"); - - iwl_print_mismatch_sec(priv, &img->sec[IWL_UCODE_SECTION_INST]); - return -EIO; -} - struct iwl_alive_data { bool valid; u8 subtype; @@ -450,18 +367,7 @@ int iwl_load_ucode_wait_alive(struct iwl_priv *priv, return -EIO; } - /* - * This step takes a long time (60-80ms!!) and - * WoWLAN image should be loaded quickly, so - * skip it for WoWLAN. - */ if (ucode_type != IWL_UCODE_WOWLAN) { - ret = iwl_verify_ucode(priv, ucode_type); - if (ret) { - priv->cur_ucode = old_type; - return ret; - } - /* delay a bit to give rfkill time to run */ msleep(5); } -- cgit v1.2.3 From 6ae02f3ef7f20af0237e21a979f66b13198921da Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Dec 2012 11:10:43 +0200 Subject: iwlwifi: let the op_mode run a FW while in RFKILL In some cases, the fw should run even if the NIC is in RFKILL. Make the API more flexible to allow that. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/ucode.c | 2 +- drivers/net/wireless/iwlwifi/iwl-trans.h | 8 +++++--- drivers/net/wireless/iwlwifi/pcie/trans.c | 4 ++-- 3 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c index ecf700bf9842..ebec13a3329f 100644 --- a/drivers/net/wireless/iwlwifi/dvm/ucode.c +++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c @@ -343,7 +343,7 @@ int iwl_load_ucode_wait_alive(struct iwl_priv *priv, alive_cmd, ARRAY_SIZE(alive_cmd), iwl_alive_fn, &alive_data); - ret = iwl_trans_start_fw(priv->trans, fw); + ret = iwl_trans_start_fw(priv->trans, fw, false); if (ret) { priv->cur_ucode = old_type; iwl_remove_notification(&priv->notif_wait, &alive_wait); diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 15b4700d2a2f..16a82b5a4671 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -399,7 +399,8 @@ struct iwl_trans_ops { int (*start_hw)(struct iwl_trans *iwl_trans); void (*stop_hw)(struct iwl_trans *iwl_trans, bool op_mode_leaving); - int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw); + int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw, + bool run_in_rfkill); void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); void (*stop_device)(struct iwl_trans *trans); @@ -531,13 +532,14 @@ static inline void iwl_trans_fw_alive(struct iwl_trans *trans, u32 scd_addr) } static inline int iwl_trans_start_fw(struct iwl_trans *trans, - const struct fw_img *fw) + const struct fw_img *fw, + bool run_in_rfkill) { might_sleep(); WARN_ON_ONCE(!trans->rx_mpdu_cmd); - return trans->ops->start_fw(trans, fw); + return trans->ops->start_fw(trans, fw, run_in_rfkill); } static inline void iwl_trans_stop_device(struct iwl_trans *trans) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index ab179ce36de5..e67e179bd04b 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -435,7 +435,7 @@ static int iwl_pcie_load_given_ucode(struct iwl_trans *trans, } static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, - const struct fw_img *fw) + const struct fw_img *fw, bool run_in_rfkill) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); int ret; @@ -454,7 +454,7 @@ static int iwl_trans_pcie_start_fw(struct iwl_trans *trans, /* If platform's RF_KILL switch is NOT set to KILL */ hw_rfkill = iwl_is_rfkill_set(trans); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - if (hw_rfkill) + if (hw_rfkill && !run_in_rfkill) return -ERFKILL; iwl_write32(trans, CSR_INT, 0xFFFFFFFF); -- cgit v1.2.3 From f317243a8ba1b05338bc03c6606a51021f249a67 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 28 Dec 2012 12:27:43 +0100 Subject: iwlwifi: use __packed Use __packed instead of __attribute__((packed)). Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/commands.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/commands.h b/drivers/net/wireless/iwlwifi/dvm/commands.h index 71ab76b2b39d..0ca99c13f7f2 100644 --- a/drivers/net/wireless/iwlwifi/dvm/commands.h +++ b/drivers/net/wireless/iwlwifi/dvm/commands.h @@ -3695,7 +3695,7 @@ struct iwl_bt_uart_msg { u8 frame5; u8 frame6; u8 frame7; -} __attribute__((packed)); +} __packed; struct iwl_bt_coex_profile_notif { struct iwl_bt_uart_msg last_bt_uart_msg; @@ -3703,7 +3703,7 @@ struct iwl_bt_coex_profile_notif { u8 bt_traffic_load; /* 0 .. 3? */ u8 bt_ci_compliance; /* 0 - not complied, 1 - complied */ u8 reserved; -} __attribute__((packed)); +} __packed; #define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_POS 0 #define IWL_BT_COEX_PRIO_TBL_SHARED_ANTENNA_MSK 0x1 @@ -3752,7 +3752,7 @@ enum bt_coex_prio_table_priorities { struct iwl_bt_coex_prio_table_cmd { u8 prio_tbl[BT_COEX_PRIO_TBL_EVT_MAX]; -} __attribute__((packed)); +} __packed; #define IWL_BT_COEX_ENV_CLOSE 0 #define IWL_BT_COEX_ENV_OPEN 1 @@ -3764,7 +3764,7 @@ struct iwl_bt_coex_prot_env_cmd { u8 action; /* 0 = closed, 1 = open */ u8 type; /* 0 .. 15 */ u8 reserved[2]; -} __attribute__((packed)); +} __packed; /* * REPLY_D3_CONFIG -- cgit v1.2.3 From 7a65d17053c758109477f420e813ba2d826b0eae Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Dec 2012 15:01:24 +0200 Subject: iwlwifi: virtualize iwl_{grab,release}_nic_access Since different transports have different ways to wake the up the NIC, we need to virtualize it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 4 +- drivers/net/wireless/iwlwifi/dvm/main.c | 8 +- drivers/net/wireless/iwlwifi/dvm/tt.c | 4 +- drivers/net/wireless/iwlwifi/iwl-io.c | 114 ++++++---------------------- drivers/net/wireless/iwlwifi/iwl-io.h | 6 +- drivers/net/wireless/iwlwifi/iwl-test.c | 8 +- drivers/net/wireless/iwlwifi/iwl-trans.h | 15 ++++ drivers/net/wireless/iwlwifi/pcie/trans.c | 64 ++++++++++++++++ 8 files changed, 115 insertions(+), 108 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 3163e0f38c25..8965a9824f50 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -459,11 +459,11 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw) base = priv->device_pointers.error_event_table; if (iwlagn_hw_valid_rtc_data_addr(base)) { spin_lock_irqsave(&priv->trans->reg_lock, flags); - ret = iwl_grab_nic_access_silent(priv->trans); + ret = iwl_trans_grab_nic_access(priv->trans, true); if (likely(ret == 0)) { iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, base); status = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); - iwl_release_nic_access(priv->trans); + iwl_trans_release_nic_access(priv->trans); } spin_unlock_irqrestore(&priv->trans->reg_lock, flags); diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index faa05932efae..c4caedd4fa9c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -354,7 +354,7 @@ static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, /* Make sure device is powered up for SRAM reads */ spin_lock_irqsave(&priv->trans->reg_lock, reg_flags); - if (unlikely(!iwl_grab_nic_access(priv->trans))) { + if (unlikely(!iwl_trans_grab_nic_access(priv->trans, false))) { spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags); return; } @@ -388,7 +388,7 @@ static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, } } /* Allow device to power down */ - iwl_release_nic_access(priv->trans); + iwl_trans_release_nic_access(priv->trans); spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags); } @@ -1717,7 +1717,7 @@ static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, /* Make sure device is powered up for SRAM reads */ spin_lock_irqsave(&trans->reg_lock, reg_flags); - if (unlikely(!iwl_grab_nic_access(trans))) + if (unlikely(!iwl_trans_grab_nic_access(trans, false))) goto out_unlock; /* Set starting address; reads will auto-increment */ @@ -1756,7 +1756,7 @@ static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, } /* Allow device to power down */ - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); out_unlock: spin_unlock_irqrestore(&trans->reg_lock, reg_flags); return pos; diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.c b/drivers/net/wireless/iwlwifi/dvm/tt.c index eb864433e59d..a8ae51307db4 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tt.c +++ b/drivers/net/wireless/iwlwifi/dvm/tt.c @@ -186,8 +186,8 @@ static void iwl_tt_check_exit_ct_kill(unsigned long data) } iwl_read32(priv->trans, CSR_UCODE_DRV_GP1); spin_lock_irqsave(&priv->trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(priv->trans))) - iwl_release_nic_access(priv->trans); + if (likely(iwl_trans_grab_nic_access(priv->trans, false))) + iwl_trans_release_nic_access(priv->trans); spin_unlock_irqrestore(&priv->trans->reg_lock, flags); /* Reschedule the ct_kill timer to occur in diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c index cdaff9572059..cb36fedd157a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/iwlwifi/iwl-io.c @@ -35,12 +35,12 @@ #define IWL_POLL_INTERVAL 10 /* microseconds */ -static inline void __iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask) +void __iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask) { iwl_write32(trans, reg, iwl_read32(trans, reg) | mask); } -static inline void __iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask) +void __iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask) { iwl_write32(trans, reg, iwl_read32(trans, reg) & ~mask); } @@ -99,86 +99,15 @@ int iwl_poll_bit(struct iwl_trans *trans, u32 addr, } EXPORT_SYMBOL_GPL(iwl_poll_bit); -int iwl_grab_nic_access_silent(struct iwl_trans *trans) -{ - int ret; - - lockdep_assert_held(&trans->reg_lock); - - /* this bit wakes up the NIC */ - __iwl_set_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - - /* - * These bits say the device is running, and should keep running for - * at least a short while (at least as long as MAC_ACCESS_REQ stays 1), - * but they do not indicate that embedded SRAM is restored yet; - * 3945 and 4965 have volatile SRAM, and must save/restore contents - * to/from host DRAM when sleeping/waking for power-saving. - * Each direction takes approximately 1/4 millisecond; with this - * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a - * series of register accesses are expected (e.g. reading Event Log), - * to keep device from sleeping. - * - * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that - * SRAM is okay/restored. We don't check that here because this call - * is just for hardware register access; but GP1 MAC_SLEEP check is a - * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log). - * - * 5000 series and later (including 1000 series) have non-volatile SRAM, - * and do not save/restore SRAM when power cycling. - */ - ret = iwl_poll_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN, - (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY | - CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP), 15000); - if (ret < 0) { - iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_FORCE_NMI); - return -EIO; - } - - return 0; -} -EXPORT_SYMBOL_GPL(iwl_grab_nic_access_silent); - -bool iwl_grab_nic_access(struct iwl_trans *trans) -{ - int ret = iwl_grab_nic_access_silent(trans); - if (unlikely(ret)) { - u32 val = iwl_read32(trans, CSR_GP_CNTRL); - WARN_ONCE(1, "Timeout waiting for hardware access " - "(CSR_GP_CNTRL 0x%08x)\n", val); - return false; - } - - return true; -} -EXPORT_SYMBOL_GPL(iwl_grab_nic_access); - -void iwl_release_nic_access(struct iwl_trans *trans) -{ - lockdep_assert_held(&trans->reg_lock); - __iwl_clear_bit(trans, CSR_GP_CNTRL, - CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); - /* - * Above we read the CSR_GP_CNTRL register, which will flush - * any previous writes, but we need the write that clears the - * MAC_ACCESS_REQ bit to be performed before any other writes - * scheduled on different CPUs (after we drop reg_lock). - */ - mmiowb(); -} -EXPORT_SYMBOL_GPL(iwl_release_nic_access); - u32 iwl_read_direct32(struct iwl_trans *trans, u32 reg) { u32 value; unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); + iwl_trans_grab_nic_access(trans, false); value = iwl_read32(trans, reg); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); spin_unlock_irqrestore(&trans->reg_lock, flags); return value; @@ -190,9 +119,9 @@ void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { iwl_write32(trans, reg, value); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -233,9 +162,9 @@ u32 iwl_read_prph(struct iwl_trans *trans, u32 ofs) u32 val; spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); + iwl_trans_grab_nic_access(trans, false); val = __iwl_read_prph(trans, ofs); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); spin_unlock_irqrestore(&trans->reg_lock, flags); return val; } @@ -246,9 +175,9 @@ void iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { __iwl_write_prph(trans, ofs, val); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -259,10 +188,10 @@ void iwl_set_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { __iwl_write_prph(trans, ofs, __iwl_read_prph(trans, ofs) | mask); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -274,10 +203,10 @@ void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 ofs, unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { __iwl_write_prph(trans, ofs, (__iwl_read_prph(trans, ofs) & mask) | bits); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -289,10 +218,10 @@ void iwl_clear_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) u32 val; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { val = __iwl_read_prph(trans, ofs); __iwl_write_prph(trans, ofs, (val & ~mask)); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -306,11 +235,11 @@ void _iwl_read_targ_mem_dwords(struct iwl_trans *trans, u32 addr, u32 *vals = buf; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); for (offs = 0; offs < dwords; offs++) vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); } spin_unlock_irqrestore(&trans->reg_lock, flags); } @@ -334,13 +263,14 @@ int _iwl_write_targ_mem_dwords(struct iwl_trans *trans, u32 addr, const u32 *vals = buf; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_grab_nic_access(trans))) { + if (likely(iwl_trans_grab_nic_access(trans, false))) { iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); for (offs = 0; offs < dwords; offs++) iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); - iwl_release_nic_access(trans); - } else + iwl_trans_release_nic_access(trans); + } else { result = -EBUSY; + } spin_unlock_irqrestore(&trans->reg_lock, flags); return result; diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 48dc753e3742..40eb0a1709b1 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -53,6 +53,8 @@ static inline u32 iwl_read32(struct iwl_trans *trans, u32 ofs) void iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask); void iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask); +void __iwl_set_bit(struct iwl_trans *trans, u32 reg, u32 mask); +void __iwl_clear_bit(struct iwl_trans *trans, u32 reg, u32 mask); void iwl_set_bits_mask(struct iwl_trans *trans, u32 reg, u32 mask, u32 value); @@ -61,10 +63,6 @@ int iwl_poll_bit(struct iwl_trans *trans, u32 addr, int iwl_poll_direct_bit(struct iwl_trans *trans, u32 addr, u32 mask, int timeout); -int iwl_grab_nic_access_silent(struct iwl_trans *trans); -bool iwl_grab_nic_access(struct iwl_trans *trans); -void iwl_release_nic_access(struct iwl_trans *trans); - u32 iwl_read_direct32(struct iwl_trans *trans, u32 reg); void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value); diff --git a/drivers/net/wireless/iwlwifi/iwl-test.c b/drivers/net/wireless/iwlwifi/iwl-test.c index 81e8c7126d72..08c1cfec8590 100644 --- a/drivers/net/wireless/iwlwifi/iwl-test.c +++ b/drivers/net/wireless/iwlwifi/iwl-test.c @@ -467,13 +467,13 @@ static int iwl_test_indirect_read(struct iwl_test *tst, u32 addr, u32 size) if (IWL_ABS_PRPH_START <= addr && addr < IWL_ABS_PRPH_START + PRPH_END) { spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); + iwl_trans_grab_nic_access(trans, false); iwl_write32(trans, HBUS_TARG_PRPH_RADDR, addr | (3 << 24)); for (i = 0; i < size; i += 4) *(u32 *)(tst->mem.addr + i) = iwl_read32(trans, HBUS_TARG_PRPH_RDAT); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); spin_unlock_irqrestore(&trans->reg_lock, flags); } else { /* target memory (SRAM) */ _iwl_read_targ_mem_dwords(trans, addr, @@ -505,12 +505,12 @@ static int iwl_test_indirect_write(struct iwl_test *tst, u32 addr, if (size < 4) { memcpy(&val, buf, size); spin_lock_irqsave(&trans->reg_lock, flags); - iwl_grab_nic_access(trans); + iwl_trans_grab_nic_access(trans, false); iwl_write32(trans, HBUS_TARG_PRPH_WADDR, (addr & 0x0000FFFF) | ((size - 1) << 24)); iwl_write32(trans, HBUS_TARG_PRPH_WDAT, val); - iwl_release_nic_access(trans); + iwl_trans_release_nic_access(trans); /* needed after consecutive writes w/o read */ mmiowb(); spin_unlock_irqrestore(&trans->reg_lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 16a82b5a4671..1d1f5d0e5726 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -394,6 +394,8 @@ struct iwl_trans; * the op_mode. May be called several times before start_fw, can't be * called after that. * @set_pmi: set the power pmi state + * @grab_nic_access: wake the NIC to be able to access non-HBUS regs + * @release_nic_access: let the NIC go to sleep */ struct iwl_trans_ops { @@ -431,6 +433,8 @@ struct iwl_trans_ops { void (*configure)(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg); void (*set_pmi)(struct iwl_trans *trans, bool state); + bool (*grab_nic_access)(struct iwl_trans *trans, bool silent); + void (*release_nic_access)(struct iwl_trans *trans); }; /** @@ -689,6 +693,17 @@ static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state) trans->ops->set_pmi(trans, state); } +static inline bool iwl_trans_grab_nic_access(struct iwl_trans *trans, + bool silent) +{ + return trans->ops->grab_nic_access(trans, silent); +} + +static inline void iwl_trans_release_nic_access(struct iwl_trans *trans) +{ + trans->ops->release_nic_access(trans); +} + /***************************************************** * driver (transport) register/unregister functions ******************************************************/ diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index e67e179bd04b..80b05d821688 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -759,6 +759,68 @@ static int iwl_trans_pcie_resume(struct iwl_trans *trans) } #endif /* CONFIG_PM_SLEEP */ +static bool iwl_trans_pcie_grab_nic_access(struct iwl_trans *trans, bool silent) +{ + int ret; + + lockdep_assert_held(&trans->reg_lock); + + /* this bit wakes up the NIC */ + __iwl_set_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + + /* + * These bits say the device is running, and should keep running for + * at least a short while (at least as long as MAC_ACCESS_REQ stays 1), + * but they do not indicate that embedded SRAM is restored yet; + * 3945 and 4965 have volatile SRAM, and must save/restore contents + * to/from host DRAM when sleeping/waking for power-saving. + * Each direction takes approximately 1/4 millisecond; with this + * overhead, it's a good idea to grab and hold MAC_ACCESS_REQUEST if a + * series of register accesses are expected (e.g. reading Event Log), + * to keep device from sleeping. + * + * CSR_UCODE_DRV_GP1 register bit MAC_SLEEP == 0 indicates that + * SRAM is okay/restored. We don't check that here because this call + * is just for hardware register access; but GP1 MAC_SLEEP check is a + * good idea before accessing 3945/4965 SRAM (e.g. reading Event Log). + * + * 5000 series and later (including 1000 series) have non-volatile SRAM, + * and do not save/restore SRAM when power cycling. + */ + ret = iwl_poll_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_VAL_MAC_ACCESS_EN, + (CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY | + CSR_GP_CNTRL_REG_FLAG_GOING_TO_SLEEP), 15000); + if (unlikely(ret < 0)) { + iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_FORCE_NMI); + if (!silent) { + u32 val = iwl_read32(trans, CSR_GP_CNTRL); + WARN_ONCE(1, + "Timeout waiting for hardware access (CSR_GP_CNTRL 0x%08x)\n", + val); + return false; + } + } + + return true; +} + +static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans) +{ + lockdep_assert_held(&trans->reg_lock); + __iwl_clear_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + /* + * Above we read the CSR_GP_CNTRL register, which will flush + * any previous writes, but we need the write that clears the + * MAC_ACCESS_REQ bit to be performed before any other writes + * scheduled on different CPUs (after we drop reg_lock). + */ + mmiowb(); +} + + #define IWL_FLUSH_WAIT_MS 2000 static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans) @@ -1238,6 +1300,8 @@ static const struct iwl_trans_ops trans_ops_pcie = { .write_prph = iwl_trans_pcie_write_prph, .configure = iwl_trans_pcie_configure, .set_pmi = iwl_trans_pcie_set_pmi, + .grab_nic_access = iwl_trans_pcie_grab_nic_access, + .release_nic_access = iwl_trans_pcie_release_nic_access }; struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, -- cgit v1.2.3 From 4fd442db98dadf33ecce6d489bbbc95f6e8d3b31 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 24 Dec 2012 14:27:11 +0200 Subject: iwlwifi: virtualize SRAM access Different transports implement the access to the SRAM in different ways. Virtualize it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/debugfs.c | 4 +-- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 2 +- drivers/net/wireless/iwlwifi/dvm/main.c | 13 +++---- drivers/net/wireless/iwlwifi/iwl-io.c | 56 ----------------------------- drivers/net/wireless/iwlwifi/iwl-io.h | 15 -------- drivers/net/wireless/iwlwifi/iwl-test.c | 7 ++-- drivers/net/wireless/iwlwifi/iwl-trans.h | 43 +++++++++++++++++++++- drivers/net/wireless/iwlwifi/pcie/trans.c | 41 +++++++++++++++++++++ drivers/net/wireless/iwlwifi/pcie/tx.c | 26 +++++++------- 9 files changed, 109 insertions(+), 98 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/debugfs.c b/drivers/net/wireless/iwlwifi/dvm/debugfs.c index 5b9533eef54d..72c74af38138 100644 --- a/drivers/net/wireless/iwlwifi/dvm/debugfs.c +++ b/drivers/net/wireless/iwlwifi/dvm/debugfs.c @@ -157,7 +157,7 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file, sram = priv->dbgfs_sram_offset & ~0x3; /* read the first u32 from sram */ - val = iwl_read_targ_mem(priv->trans, sram); + val = iwl_trans_read_mem32(priv->trans, sram); for (; len; len--) { /* put the address at the start of every line */ @@ -176,7 +176,7 @@ static ssize_t iwl_dbgfs_sram_read(struct file *file, if (++offset == 4) { sram += 4; offset = 0; - val = iwl_read_targ_mem(priv->trans, sram); + val = iwl_trans_read_mem32(priv->trans, sram); } /* put in extra spaces and split lines for human readability */ diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 8965a9824f50..9c1f055f4316 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -479,7 +479,7 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw) } if (priv->wowlan_sram) - _iwl_read_targ_mem_dwords( + iwl_trans_read_mem( priv->trans, 0x800000, priv->wowlan_sram, img->sec[IWL_UCODE_SECTION_DATA].len / 4); diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index c4caedd4fa9c..517d7ae549d3 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -408,7 +408,8 @@ static void iwl_continuous_event_trace(struct iwl_priv *priv) base = priv->device_pointers.log_event_table; if (iwlagn_hw_valid_rtc_data_addr(base)) { - iwl_read_targ_mem_bytes(priv->trans, base, &read, sizeof(read)); + iwl_trans_read_mem_bytes(priv->trans, base, + &read, sizeof(read)); capacity = read.capacity; mode = read.mode; num_wraps = read.wrap_counter; @@ -1627,7 +1628,7 @@ static void iwl_dump_nic_error_log(struct iwl_priv *priv) } /*TODO: Update dbgfs with ISR error stats obtained below */ - iwl_read_targ_mem_bytes(trans, base, &table, sizeof(table)); + iwl_trans_read_mem_bytes(trans, base, &table, sizeof(table)); if (ERROR_START_OFFSET <= table.valid * ERROR_ELEM_SIZE) { IWL_ERR(trans, "Start IWL Error Log Dump:\n"); @@ -1835,10 +1836,10 @@ int iwl_dump_nic_event_log(struct iwl_priv *priv, bool full_log, } /* event log header */ - capacity = iwl_read_targ_mem(trans, base); - mode = iwl_read_targ_mem(trans, base + (1 * sizeof(u32))); - num_wraps = iwl_read_targ_mem(trans, base + (2 * sizeof(u32))); - next_entry = iwl_read_targ_mem(trans, base + (3 * sizeof(u32))); + capacity = iwl_trans_read_mem32(trans, base); + mode = iwl_trans_read_mem32(trans, base + (1 * sizeof(u32))); + num_wraps = iwl_trans_read_mem32(trans, base + (2 * sizeof(u32))); + next_entry = iwl_trans_read_mem32(trans, base + (3 * sizeof(u32))); if (capacity > logsize) { IWL_ERR(priv, "Log capacity %d is bogus, limit to %d " diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c index cb36fedd157a..2bd84adbb5ae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/iwlwifi/iwl-io.c @@ -226,59 +226,3 @@ void iwl_clear_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) spin_unlock_irqrestore(&trans->reg_lock, flags); } EXPORT_SYMBOL_GPL(iwl_clear_bits_prph); - -void _iwl_read_targ_mem_dwords(struct iwl_trans *trans, u32 addr, - void *buf, int dwords) -{ - unsigned long flags; - int offs; - u32 *vals = buf; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { - iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); - for (offs = 0; offs < dwords; offs++) - vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); - iwl_trans_release_nic_access(trans); - } - spin_unlock_irqrestore(&trans->reg_lock, flags); -} -EXPORT_SYMBOL_GPL(_iwl_read_targ_mem_dwords); - -u32 iwl_read_targ_mem(struct iwl_trans *trans, u32 addr) -{ - u32 value; - - _iwl_read_targ_mem_dwords(trans, addr, &value, 1); - - return value; -} -EXPORT_SYMBOL_GPL(iwl_read_targ_mem); - -int _iwl_write_targ_mem_dwords(struct iwl_trans *trans, u32 addr, - const void *buf, int dwords) -{ - unsigned long flags; - int offs, result = 0; - const u32 *vals = buf; - - spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { - iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); - for (offs = 0; offs < dwords; offs++) - iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); - iwl_trans_release_nic_access(trans); - } else { - result = -EBUSY; - } - spin_unlock_irqrestore(&trans->reg_lock, flags); - - return result; -} -EXPORT_SYMBOL_GPL(_iwl_write_targ_mem_dwords); - -int iwl_write_targ_mem(struct iwl_trans *trans, u32 addr, u32 val) -{ - return _iwl_write_targ_mem_dwords(trans, addr, &val, 1); -} -EXPORT_SYMBOL_GPL(iwl_write_targ_mem); diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h index 40eb0a1709b1..dc478068596b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.h +++ b/drivers/net/wireless/iwlwifi/iwl-io.h @@ -74,19 +74,4 @@ void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 ofs, u32 bits, u32 mask); void iwl_clear_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask); -void _iwl_read_targ_mem_dwords(struct iwl_trans *trans, u32 addr, - void *buf, int dwords); - -#define iwl_read_targ_mem_bytes(trans, addr, buf, bufsize) \ - do { \ - BUILD_BUG_ON((bufsize) % sizeof(u32)); \ - _iwl_read_targ_mem_dwords(trans, addr, buf, \ - (bufsize) / sizeof(u32));\ - } while (0) - -int _iwl_write_targ_mem_dwords(struct iwl_trans *trans, u32 addr, - const void *buf, int dwords); - -u32 iwl_read_targ_mem(struct iwl_trans *trans, u32 addr); -int iwl_write_targ_mem(struct iwl_trans *trans, u32 addr, u32 val); #endif diff --git a/drivers/net/wireless/iwlwifi/iwl-test.c b/drivers/net/wireless/iwlwifi/iwl-test.c index 08c1cfec8590..f8d8df8f96c3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-test.c +++ b/drivers/net/wireless/iwlwifi/iwl-test.c @@ -476,9 +476,8 @@ static int iwl_test_indirect_read(struct iwl_test *tst, u32 addr, u32 size) iwl_trans_release_nic_access(trans); spin_unlock_irqrestore(&trans->reg_lock, flags); } else { /* target memory (SRAM) */ - _iwl_read_targ_mem_dwords(trans, addr, - tst->mem.addr, - tst->mem.size / 4); + iwl_trans_read_mem(trans, addr, tst->mem.addr, + tst->mem.size / 4); } tst->mem.nchunks = @@ -522,7 +521,7 @@ static int iwl_test_indirect_write(struct iwl_test *tst, u32 addr, *(u32 *)(buf+i)); } } else if (iwl_test_valid_hw_addr(tst, addr)) { - _iwl_write_targ_mem_dwords(trans, addr, buf, size / 4); + iwl_trans_write_mem(trans, addr, buf, size / 4); } else { return -EINVAL; } diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 1d1f5d0e5726..7584d5522f15 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -390,6 +390,8 @@ struct iwl_trans; * @read32: read a u32 register at offset ofs from the BAR * @read_prph: read a DWORD from a periphery register * @write_prph: write a DWORD to a periphery register + * @read_mem: read device's SRAM in DWORD + * @write_mem: write device's SRAM in DWORD * @configure: configure parameters required by the transport layer from * the op_mode. May be called several times before start_fw, can't be * called after that. @@ -430,6 +432,10 @@ struct iwl_trans_ops { u32 (*read32)(struct iwl_trans *trans, u32 ofs); u32 (*read_prph)(struct iwl_trans *trans, u32 ofs); void (*write_prph)(struct iwl_trans *trans, u32 ofs, u32 val); + int (*read_mem)(struct iwl_trans *trans, u32 addr, + void *buf, int dwords); + int (*write_mem)(struct iwl_trans *trans, u32 addr, + void *buf, int dwords); void (*configure)(struct iwl_trans *trans, const struct iwl_trans_config *trans_cfg); void (*set_pmi)(struct iwl_trans *trans, bool state); @@ -645,7 +651,7 @@ static inline int iwl_trans_wait_tx_queue_empty(struct iwl_trans *trans) } static inline int iwl_trans_dbgfs_register(struct iwl_trans *trans, - struct dentry *dir) + struct dentry *dir) { return trans->ops->dbgfs_register(trans, dir); } @@ -688,6 +694,41 @@ static inline void iwl_trans_write_prph(struct iwl_trans *trans, u32 ofs, return trans->ops->write_prph(trans, ofs, val); } +static inline int iwl_trans_read_mem(struct iwl_trans *trans, u32 addr, + void *buf, int dwords) +{ + return trans->ops->read_mem(trans, addr, buf, dwords); +} + +#define iwl_trans_read_mem_bytes(trans, addr, buf, bufsize) \ + do { \ + if (__builtin_constant_p(bufsize)) \ + BUILD_BUG_ON((bufsize) % sizeof(u32)); \ + iwl_trans_read_mem(trans, addr, buf, (bufsize) / sizeof(u32));\ + } while (0) + +static inline u32 iwl_trans_read_mem32(struct iwl_trans *trans, u32 addr) +{ + u32 value; + + if (WARN_ON(iwl_trans_read_mem(trans, addr, &value, 1))) + return 0xa5a5a5a5; + + return value; +} + +static inline int iwl_trans_write_mem(struct iwl_trans *trans, u32 addr, + void *buf, int dwords) +{ + return trans->ops->write_mem(trans, addr, buf, dwords); +} + +static inline u32 iwl_trans_write_mem32(struct iwl_trans *trans, u32 addr, + u32 val) +{ + return iwl_trans_write_mem(trans, addr, &val, 1); +} + static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state) { trans->ops->set_pmi(trans, state); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 80b05d821688..3a40607ed542 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -820,6 +820,45 @@ static void iwl_trans_pcie_release_nic_access(struct iwl_trans *trans) mmiowb(); } +static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr, + void *buf, int dwords) +{ + unsigned long flags; + int offs, ret = 0; + u32 *vals = buf; + + spin_lock_irqsave(&trans->reg_lock, flags); + if (likely(iwl_trans_grab_nic_access(trans, false))) { + iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); + for (offs = 0; offs < dwords; offs++) + vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); + iwl_trans_release_nic_access(trans); + } else { + ret = -EBUSY; + } + spin_unlock_irqrestore(&trans->reg_lock, flags); + return ret; +} + +static int iwl_trans_pcie_write_mem(struct iwl_trans *trans, u32 addr, + void *buf, int dwords) +{ + unsigned long flags; + int offs, ret = 0; + u32 *vals = buf; + + spin_lock_irqsave(&trans->reg_lock, flags); + if (likely(iwl_trans_grab_nic_access(trans, false))) { + iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); + for (offs = 0; offs < dwords; offs++) + iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); + iwl_trans_release_nic_access(trans); + } else { + ret = -EBUSY; + } + spin_unlock_irqrestore(&trans->reg_lock, flags); + return ret; +} #define IWL_FLUSH_WAIT_MS 2000 @@ -1298,6 +1337,8 @@ static const struct iwl_trans_ops trans_ops_pcie = { .read32 = iwl_trans_pcie_read32, .read_prph = iwl_trans_pcie_read_prph, .write_prph = iwl_trans_pcie_write_prph, + .read_mem = iwl_trans_pcie_read_mem, + .write_mem = iwl_trans_pcie_write_mem, .configure = iwl_trans_pcie_configure, .set_pmi = iwl_trans_pcie_set_pmi, .grab_nic_access = iwl_trans_pcie_grab_nic_access, diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 7af8f0b55d2d..d25fc8aaccc6 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -160,7 +160,7 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data) IWL_ERR(trans, "Current SW read_ptr %d write_ptr %d\n", txq->q.read_ptr, txq->q.write_ptr); - iwl_read_targ_mem_bytes(trans, scd_sram_addr, buf, sizeof(buf)); + iwl_trans_read_mem_bytes(trans, scd_sram_addr, buf, sizeof(buf)); iwl_print_hex_error(trans, buf, sizeof(buf)); @@ -173,9 +173,9 @@ static void iwl_pcie_txq_stuck_timer(unsigned long data) u8 fifo = (status >> SCD_QUEUE_STTS_REG_POS_TXF) & 0x7; bool active = !!(status & BIT(SCD_QUEUE_STTS_REG_POS_ACTIVE)); u32 tbl_dw = - iwl_read_targ_mem(trans, - trans_pcie->scd_base_addr + - SCD_TRANS_TBL_OFFSET_QUEUE(i)); + iwl_trans_read_mem32(trans, + trans_pcie->scd_base_addr + + SCD_TRANS_TBL_OFFSET_QUEUE(i)); if (i & 0x1) tbl_dw = (tbl_dw & 0xFFFF0000) >> 16; @@ -659,16 +659,16 @@ void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr) /* reset conext data memory */ for (; a < trans_pcie->scd_base_addr + SCD_CONTEXT_MEM_UPPER_BOUND; a += 4) - iwl_write_targ_mem(trans, a, 0); + iwl_trans_write_mem32(trans, a, 0); /* reset tx status memory */ for (; a < trans_pcie->scd_base_addr + SCD_TX_STTS_MEM_UPPER_BOUND; a += 4) - iwl_write_targ_mem(trans, a, 0); + iwl_trans_write_mem32(trans, a, 0); for (; a < trans_pcie->scd_base_addr + SCD_TRANS_TBL_OFFSET_QUEUE( trans->cfg->base_params->num_of_queues); a += 4) - iwl_write_targ_mem(trans, a, 0); + iwl_trans_write_mem32(trans, a, 0); iwl_write_prph(trans, SCD_DRAM_BASE_ADDR, trans_pcie->scd_bc_tbls.dma >> 10); @@ -1005,14 +1005,14 @@ static int iwl_pcie_txq_set_ratid_map(struct iwl_trans *trans, u16 ra_tid, tbl_dw_addr = trans_pcie->scd_base_addr + SCD_TRANS_TBL_OFFSET_QUEUE(txq_id); - tbl_dw = iwl_read_targ_mem(trans, tbl_dw_addr); + tbl_dw = iwl_trans_read_mem32(trans, tbl_dw_addr); if (txq_id & 0x1) tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF); else tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000); - iwl_write_targ_mem(trans, tbl_dw_addr, tbl_dw); + iwl_trans_write_mem32(trans, tbl_dw_addr, tbl_dw); return 0; } @@ -1071,9 +1071,9 @@ void iwl_trans_pcie_txq_enable(struct iwl_trans *trans, int txq_id, int fifo, iwl_write_prph(trans, SCD_QUEUE_RDPTR(txq_id), ssn); /* Set up Tx window size and frame limit for this queue */ - iwl_write_targ_mem(trans, trans_pcie->scd_base_addr + + iwl_trans_write_mem32(trans, trans_pcie->scd_base_addr + SCD_CONTEXT_QUEUE_OFFSET(txq_id), 0); - iwl_write_targ_mem(trans, trans_pcie->scd_base_addr + + iwl_trans_write_mem32(trans, trans_pcie->scd_base_addr + SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32), ((frame_limit << SCD_QUEUE_CTX_REG2_WIN_SIZE_POS) & SCD_QUEUE_CTX_REG2_WIN_SIZE_MSK) | @@ -1104,8 +1104,8 @@ void iwl_trans_pcie_txq_disable(struct iwl_trans *trans, int txq_id) iwl_pcie_txq_set_inactive(trans, txq_id); - _iwl_write_targ_mem_dwords(trans, stts_addr, - zero_val, ARRAY_SIZE(zero_val)); + iwl_trans_write_mem(trans, stts_addr, (void *)zero_val, + ARRAY_SIZE(zero_val)); iwl_pcie_txq_unmap(trans, txq_id); -- cgit v1.2.3 From 653ea7a6a5a912a96affc6443b6e9f42dfce2234 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 31 Dec 2012 13:15:36 +0200 Subject: iwlwifi: don't treat a bool as an error code iwl_trans_grab_nic_access returns a boolean. So ret should explicitely set to an error code and not rely on the value returned by iwl_trans_grab_nic_access. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 9c1f055f4316..1ed4bc694d29 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -459,11 +459,11 @@ static int iwlagn_mac_resume(struct ieee80211_hw *hw) base = priv->device_pointers.error_event_table; if (iwlagn_hw_valid_rtc_data_addr(base)) { spin_lock_irqsave(&priv->trans->reg_lock, flags); - ret = iwl_trans_grab_nic_access(priv->trans, true); - if (likely(ret == 0)) { + if (iwl_trans_grab_nic_access(priv->trans, true)) { iwl_write32(priv->trans, HBUS_TARG_MEM_RADDR, base); status = iwl_read32(priv->trans, HBUS_TARG_MEM_RDAT); iwl_trans_release_nic_access(priv->trans); + ret = 0; } spin_unlock_irqrestore(&priv->trans->reg_lock, flags); -- cgit v1.2.3 From a8b691e6104e6bd27070b6ed6622d0b640707fa8 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 23:08:06 +0100 Subject: iwlwifi: request IRQ only once There's no need to request the IRQ every time the device is started, we can request it just once. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/internal.h | 4 -- drivers/net/wireless/iwlwifi/pcie/trans.c | 62 +++++++++++----------------- 2 files changed, 25 insertions(+), 41 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 15f79754b67b..8f017c34ab2b 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -222,8 +222,6 @@ struct iwl_txq { * @rx_replenish: work that will be called when buffers need to be allocated * @drv - pointer to iwl_drv * @trans: pointer to the generic transport area - * @irq - the irq number for the device - * @irq_requested: true when the irq has been requested * @scd_base_addr: scheduler sram base address in SRAM * @scd_bc_tbls: pointer to the byte count table of the scheduler * @kw: keep warm address @@ -250,11 +248,9 @@ struct iwl_trans_pcie { int ict_index; u32 inta; bool use_ict; - bool irq_requested; struct tasklet_struct irq_tasklet; struct isr_statistics isr_stats; - unsigned int irq; spinlock_t irq_lock; u32 inta_mask; u32 scd_base_addr; diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 3a40607ed542..48cd65e950a1 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -535,7 +535,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) iwl_enable_rfkill_int(trans); /* wait to make sure we flush pending tasklet*/ - synchronize_irq(trans_pcie->irq); + synchronize_irq(trans_pcie->pci_dev->irq); tasklet_kill(&trans_pcie->irq_tasklet); cancel_work_sync(&trans_pcie->rx_replenish); @@ -564,33 +564,13 @@ static void iwl_trans_pcie_wowlan_suspend(struct iwl_trans *trans) static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) { - struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - int err; bool hw_rfkill; - - trans_pcie->inta_mask = CSR_INI_SET_MASK; - - if (!trans_pcie->irq_requested) { - tasklet_init(&trans_pcie->irq_tasklet, (void (*)(unsigned long)) - iwl_pcie_tasklet, (unsigned long)trans); - - iwl_pcie_alloc_ict(trans); - - err = request_irq(trans_pcie->irq, iwl_pcie_isr_ict, - IRQF_SHARED, DRV_NAME, trans); - if (err) { - IWL_ERR(trans, "Error allocating IRQ %d\n", - trans_pcie->irq); - goto error; - } - - trans_pcie->irq_requested = true; - } + int err; err = iwl_pcie_prepare_card_hw(trans); if (err) { IWL_ERR(trans, "Error while preparing HW: %d\n", err); - goto err_free_irq; + return err; } iwl_pcie_apm_init(trans); @@ -601,15 +581,7 @@ static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) hw_rfkill = iwl_is_rfkill_set(trans); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - return err; - -err_free_irq: - trans_pcie->irq_requested = false; - free_irq(trans_pcie->irq, trans); -error: - iwl_pcie_free_ict(trans); - tasklet_kill(&trans_pcie->irq_tasklet); - return err; + return 0; } static void iwl_trans_pcie_stop_hw(struct iwl_trans *trans, @@ -713,10 +685,8 @@ void iwl_trans_pcie_free(struct iwl_trans *trans) iwl_pcie_tx_free(trans); iwl_pcie_rx_free(trans); - if (trans_pcie->irq_requested == true) { - free_irq(trans_pcie->irq, trans); - iwl_pcie_free_ict(trans); - } + free_irq(trans_pcie->pci_dev->irq, trans); + iwl_pcie_free_ict(trans); pci_disable_msi(trans_pcie->pci_dev); iounmap(trans_pcie->hw_base); @@ -1424,7 +1394,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, } trans->dev = &pdev->dev; - trans_pcie->irq = pdev->irq; trans_pcie->pci_dev = pdev; trans->hw_rev = iwl_read32(trans, CSR_HW_REV); trans->hw_id = (pdev->device << 16) + pdev->subsystem_device; @@ -1450,8 +1419,27 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, if (!trans->dev_cmd_pool) goto out_pci_disable_msi; + trans_pcie->inta_mask = CSR_INI_SET_MASK; + + tasklet_init(&trans_pcie->irq_tasklet, (void (*)(unsigned long)) + iwl_pcie_tasklet, (unsigned long)trans); + + if (iwl_pcie_alloc_ict(trans)) + goto out_free_cmd_pool; + + err = request_irq(pdev->irq, iwl_pcie_isr_ict, + IRQF_SHARED, DRV_NAME, trans); + if (err) { + IWL_ERR(trans, "Error allocating IRQ %d\n", pdev->irq); + goto out_free_ict; + } + return trans; +out_free_ict: + iwl_pcie_free_ict(trans); +out_free_cmd_pool: + kmem_cache_destroy(trans->dev_cmd_pool); out_pci_disable_msi: pci_disable_msi(pdev); out_pci_release_regions: -- cgit v1.2.3 From 0aa86df673d2122fcffc43ed0266279e1b8d8204 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 22:58:21 +0100 Subject: iwlwifi: move some PCIe calls to better places Synchronizing the IRQ is pointless when we will then enable the RF-Kill interrupt again, but is needed before we free it and the data needed to handle IRQs; move it to the free function. Simiarly, cancelling the replenish work struct can move to the function that frees the RX data structures. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/rx.c | 2 ++ drivers/net/wireless/iwlwifi/pcie/trans.c | 9 +++------ 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index dad4c4aad91f..02c9016d9684 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -545,6 +545,8 @@ void iwl_pcie_rx_free(struct iwl_trans *trans) return; } + cancel_work_sync(&trans_pcie->rx_replenish); + spin_lock_irqsave(&rxq->lock, flags); iwl_pcie_rxq_free_rbs(trans); spin_unlock_irqrestore(&rxq->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 48cd65e950a1..bca620363037 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -534,12 +534,6 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) iwl_enable_rfkill_int(trans); - /* wait to make sure we flush pending tasklet*/ - synchronize_irq(trans_pcie->pci_dev->irq); - tasklet_kill(&trans_pcie->irq_tasklet); - - cancel_work_sync(&trans_pcie->rx_replenish); - /* stop and reset the on-board processor */ iwl_write32(trans, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET); @@ -682,6 +676,9 @@ void iwl_trans_pcie_free(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + synchronize_irq(trans_pcie->pci_dev->irq); + tasklet_kill(&trans_pcie->irq_tasklet); + iwl_pcie_tx_free(trans); iwl_pcie_rx_free(trans); -- cgit v1.2.3 From c8f9b0feab564e1ecf460b440e838673aced282c Mon Sep 17 00:00:00 2001 From: Eytan Lifshitz Date: Fri, 28 Dec 2012 00:10:36 +0200 Subject: iwlwifi: fix spelling and value in LED registers. Fix typo in the macro name and the wrong value. Signed-off-by: Eytan Lifshitz Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/led.c | 2 +- drivers/net/wireless/iwlwifi/iwl-csr.h | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/led.c b/drivers/net/wireless/iwlwifi/dvm/led.c index bf479f709091..844a17f99a18 100644 --- a/drivers/net/wireless/iwlwifi/dvm/led.c +++ b/drivers/net/wireless/iwlwifi/dvm/led.c @@ -69,7 +69,7 @@ static const struct ieee80211_tpt_blink iwl_blink[] = { /* Set led register off */ void iwlagn_led_enable(struct iwl_priv *priv) { - iwl_write32(priv->trans, CSR_LED_REG, CSR_LED_REG_TRUN_ON); + iwl_write32(priv->trans, CSR_LED_REG, CSR_LED_REG_TURN_ON); } /* diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h index 34a5287dfc2f..b419a1efac0a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-csr.h +++ b/drivers/net/wireless/iwlwifi/iwl-csr.h @@ -381,8 +381,8 @@ /* LED */ #define CSR_LED_BSM_CTRL_MSK (0xFFFFFFDF) -#define CSR_LED_REG_TRUN_ON (0x78) -#define CSR_LED_REG_TRUN_OFF (0x38) +#define CSR_LED_REG_TURN_ON (0x60) +#define CSR_LED_REG_TURN_OFF (0x20) /* ANA_PLL */ #define CSR50_ANA_PLL_CFG_VAL (0x00880300) -- cgit v1.2.3 From abae2386d55aff1d395cdb665f03684c227a6a69 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 31 Dec 2012 13:46:42 +0200 Subject: iwlwifi: always check that grab_nic_access succeeds This allows to let sparse check that the NIC access is always released. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/main.c | 4 +-- drivers/net/wireless/iwlwifi/dvm/tt.c | 2 +- drivers/net/wireless/iwlwifi/iwl-io.c | 28 +++++++++++--------- drivers/net/wireless/iwlwifi/iwl-test.c | 44 ++++++++++++++++++------------- drivers/net/wireless/iwlwifi/iwl-trans.h | 12 ++++----- drivers/net/wireless/iwlwifi/pcie/trans.c | 4 +-- 6 files changed, 51 insertions(+), 43 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index 517d7ae549d3..a64f361e341c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -354,7 +354,7 @@ static void iwl_print_cont_event_trace(struct iwl_priv *priv, u32 base, /* Make sure device is powered up for SRAM reads */ spin_lock_irqsave(&priv->trans->reg_lock, reg_flags); - if (unlikely(!iwl_trans_grab_nic_access(priv->trans, false))) { + if (!iwl_trans_grab_nic_access(priv->trans, false)) { spin_unlock_irqrestore(&priv->trans->reg_lock, reg_flags); return; } @@ -1718,7 +1718,7 @@ static int iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, /* Make sure device is powered up for SRAM reads */ spin_lock_irqsave(&trans->reg_lock, reg_flags); - if (unlikely(!iwl_trans_grab_nic_access(trans, false))) + if (!iwl_trans_grab_nic_access(trans, false)) goto out_unlock; /* Set starting address; reads will auto-increment */ diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.c b/drivers/net/wireless/iwlwifi/dvm/tt.c index a8ae51307db4..b28cfc8553d7 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tt.c +++ b/drivers/net/wireless/iwlwifi/dvm/tt.c @@ -186,7 +186,7 @@ static void iwl_tt_check_exit_ct_kill(unsigned long data) } iwl_read32(priv->trans, CSR_UCODE_DRV_GP1); spin_lock_irqsave(&priv->trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(priv->trans, false))) + if (iwl_trans_grab_nic_access(priv->trans, false)) iwl_trans_release_nic_access(priv->trans); spin_unlock_irqrestore(&priv->trans->reg_lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl-io.c b/drivers/net/wireless/iwlwifi/iwl-io.c index 2bd84adbb5ae..bff3ac96c00b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/iwlwifi/iwl-io.c @@ -101,13 +101,14 @@ EXPORT_SYMBOL_GPL(iwl_poll_bit); u32 iwl_read_direct32(struct iwl_trans *trans, u32 reg) { - u32 value; + u32 value = 0x5a5a5a5a; unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - iwl_trans_grab_nic_access(trans, false); - value = iwl_read32(trans, reg); - iwl_trans_release_nic_access(trans); + if (iwl_trans_grab_nic_access(trans, false)) { + value = iwl_read32(trans, reg); + iwl_trans_release_nic_access(trans); + } spin_unlock_irqrestore(&trans->reg_lock, flags); return value; @@ -119,7 +120,7 @@ void iwl_write_direct32(struct iwl_trans *trans, u32 reg, u32 value) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { iwl_write32(trans, reg, value); iwl_trans_release_nic_access(trans); } @@ -159,12 +160,13 @@ static inline void __iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val) u32 iwl_read_prph(struct iwl_trans *trans, u32 ofs) { unsigned long flags; - u32 val; + u32 val = 0x5a5a5a5a; spin_lock_irqsave(&trans->reg_lock, flags); - iwl_trans_grab_nic_access(trans, false); - val = __iwl_read_prph(trans, ofs); - iwl_trans_release_nic_access(trans); + if (iwl_trans_grab_nic_access(trans, false)) { + val = __iwl_read_prph(trans, ofs); + iwl_trans_release_nic_access(trans); + } spin_unlock_irqrestore(&trans->reg_lock, flags); return val; } @@ -175,7 +177,7 @@ void iwl_write_prph(struct iwl_trans *trans, u32 ofs, u32 val) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { __iwl_write_prph(trans, ofs, val); iwl_trans_release_nic_access(trans); } @@ -188,7 +190,7 @@ void iwl_set_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { __iwl_write_prph(trans, ofs, __iwl_read_prph(trans, ofs) | mask); iwl_trans_release_nic_access(trans); @@ -203,7 +205,7 @@ void iwl_set_bits_mask_prph(struct iwl_trans *trans, u32 ofs, unsigned long flags; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { __iwl_write_prph(trans, ofs, (__iwl_read_prph(trans, ofs) & mask) | bits); iwl_trans_release_nic_access(trans); @@ -218,7 +220,7 @@ void iwl_clear_bits_prph(struct iwl_trans *trans, u32 ofs, u32 mask) u32 val; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { val = __iwl_read_prph(trans, ofs); __iwl_write_prph(trans, ofs, (val & ~mask)); iwl_trans_release_nic_access(trans); diff --git a/drivers/net/wireless/iwlwifi/iwl-test.c b/drivers/net/wireless/iwlwifi/iwl-test.c index f8d8df8f96c3..1a226114fe73 100644 --- a/drivers/net/wireless/iwlwifi/iwl-test.c +++ b/drivers/net/wireless/iwlwifi/iwl-test.c @@ -467,7 +467,10 @@ static int iwl_test_indirect_read(struct iwl_test *tst, u32 addr, u32 size) if (IWL_ABS_PRPH_START <= addr && addr < IWL_ABS_PRPH_START + PRPH_END) { spin_lock_irqsave(&trans->reg_lock, flags); - iwl_trans_grab_nic_access(trans, false); + if (!iwl_trans_grab_nic_access(trans, false)) { + spin_unlock_irqrestore(&trans->reg_lock, flags); + return -EIO; + } iwl_write32(trans, HBUS_TARG_PRPH_RADDR, addr | (3 << 24)); for (i = 0; i < size; i += 4) @@ -500,26 +503,29 @@ static int iwl_test_indirect_write(struct iwl_test *tst, u32 addr, if (IWL_ABS_PRPH_START <= addr && addr < IWL_ABS_PRPH_START + PRPH_END) { - /* Periphery writes can be 1-3 bytes long, or DWORDs */ - if (size < 4) { - memcpy(&val, buf, size); - spin_lock_irqsave(&trans->reg_lock, flags); - iwl_trans_grab_nic_access(trans, false); - iwl_write32(trans, HBUS_TARG_PRPH_WADDR, - (addr & 0x0000FFFF) | - ((size - 1) << 24)); - iwl_write32(trans, HBUS_TARG_PRPH_WDAT, val); - iwl_trans_release_nic_access(trans); - /* needed after consecutive writes w/o read */ - mmiowb(); + /* Periphery writes can be 1-3 bytes long, or DWORDs */ + if (size < 4) { + memcpy(&val, buf, size); + spin_lock_irqsave(&trans->reg_lock, flags); + if (!iwl_trans_grab_nic_access(trans, false)) { spin_unlock_irqrestore(&trans->reg_lock, flags); - } else { - if (size % 4) - return -EINVAL; - for (i = 0; i < size; i += 4) - iwl_write_prph(trans, addr+i, - *(u32 *)(buf+i)); + return -EIO; } + iwl_write32(trans, HBUS_TARG_PRPH_WADDR, + (addr & 0x0000FFFF) | + ((size - 1) << 24)); + iwl_write32(trans, HBUS_TARG_PRPH_WDAT, val); + iwl_trans_release_nic_access(trans); + /* needed after consecutive writes w/o read */ + mmiowb(); + spin_unlock_irqrestore(&trans->reg_lock, flags); + } else { + if (size % 4) + return -EINVAL; + for (i = 0; i < size; i += 4) + iwl_write_prph(trans, addr+i, + *(u32 *)(buf+i)); + } } else if (iwl_test_valid_hw_addr(tst, addr)) { iwl_trans_write_mem(trans, addr, buf, size / 4); } else { diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 7584d5522f15..b0d5c715ca1e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -734,15 +734,15 @@ static inline void iwl_trans_set_pmi(struct iwl_trans *trans, bool state) trans->ops->set_pmi(trans, state); } -static inline bool iwl_trans_grab_nic_access(struct iwl_trans *trans, - bool silent) -{ - return trans->ops->grab_nic_access(trans, silent); -} +#define iwl_trans_grab_nic_access(trans, silent) \ + __cond_lock(nic_access, \ + likely((trans)->ops->grab_nic_access(trans, silent))) -static inline void iwl_trans_release_nic_access(struct iwl_trans *trans) +static inline void __releases(nic_access) +iwl_trans_release_nic_access(struct iwl_trans *trans) { trans->ops->release_nic_access(trans); + __release(nic_access); } /***************************************************** diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index bca620363037..db3b0552b2eb 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -795,7 +795,7 @@ static int iwl_trans_pcie_read_mem(struct iwl_trans *trans, u32 addr, u32 *vals = buf; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { iwl_write32(trans, HBUS_TARG_MEM_RADDR, addr); for (offs = 0; offs < dwords; offs++) vals[offs] = iwl_read32(trans, HBUS_TARG_MEM_RDAT); @@ -815,7 +815,7 @@ static int iwl_trans_pcie_write_mem(struct iwl_trans *trans, u32 addr, u32 *vals = buf; spin_lock_irqsave(&trans->reg_lock, flags); - if (likely(iwl_trans_grab_nic_access(trans, false))) { + if (iwl_trans_grab_nic_access(trans, false)) { iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); for (offs = 0; offs < dwords; offs++) iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); -- cgit v1.2.3 From 75ea719cb4773b05cc48e741feb4e267522b9656 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Thu, 3 Jan 2013 00:09:46 -0500 Subject: mac80211: fix mesh_hwmp kerneldoc One of the function names was wrong and some parameters were missing. Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- net/mac80211/mesh_hwmp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 47aeee2d8db1..9044296c8876 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -219,12 +219,14 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, } /** - * mesh_send_path error - Sends a PERR mesh management frame + * mesh_path_error_tx - Sends a PERR mesh management frame * + * @ttl: allowed remaining hops * @target: broken destination * @target_sn: SN of the broken destination * @target_rcode: reason code for this PERR * @ra: node this frame is addressed to + * @sdata: local mesh subif * * Note: This function may be called with driver locks taken that the driver * also acquires in the TX path. To avoid a deadlock we don't transmit the @@ -350,6 +352,7 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, * @sdata: local mesh subif * @mgmt: mesh management frame * @hwmp_ie: hwmp information element (PREP or PREQ) + * @action: type of hwmp ie * * This function updates the path routing information to the originator and the * transmitter of a HWMP PREQ or PREP frame. -- cgit v1.2.3 From 45034bfb8c9ecc62db40b438bea7fe728ac8facf Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 2 Jan 2013 14:55:16 -0800 Subject: mac80211_hwsim: fix tsf adjustment Make hwsim TSF offset adjustments cumulative and relative to the fake PHY TSF. Now adding 1000us, then adding -1000us doesn't result in a tsf_offset of -1000. Also the beacon timestamp can now correctly be expressed as (tsf + data->tsf_offset), which will be done in a later patch. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index d248a4cc6656..807d713414f8 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -361,7 +361,7 @@ struct mac80211_hwsim_data { int power_level; /* difference between this hw's clock and the real clock, in usecs */ - u64 tsf_offset; + s64 tsf_offset; }; @@ -427,9 +427,10 @@ static void mac80211_hwsim_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u64 tsf) { struct mac80211_hwsim_data *data = hw->priv; - struct timeval tv = ktime_to_timeval(ktime_get_real()); - u64 now = tv.tv_sec * USEC_PER_SEC + tv.tv_usec; - data->tsf_offset = tsf - now; + u64 now = mac80211_hwsim_get_tsf(hw, vif); + s64 delta = tsf - now; + + data->tsf_offset += delta; } static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw, -- cgit v1.2.3 From 01e59e467ecf976c782eecd4dc99644802cc60e2 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 2 Jan 2013 14:55:17 -0800 Subject: mac80211_hwsim: hrtimer beacon For testing various timing-sensitive protocols (power save, MBCA, etc.), a beacon accuracy of jiffies is not sufficient. A tasklet_hrtimer is used for the beacon since it runs the callback in soft-IRQ context with hrtimer resolution. Also handle BSS_CHANGED_BEACON_ENABLED for hwsim. Signed-off-by: Thomas Pedersen [simplify timer container_of] Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 63 +++++++++++++++++++++++------------ 1 file changed, 42 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 807d713414f8..c54c5d17a037 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -337,11 +337,11 @@ struct mac80211_hwsim_data { int scan_chan_idx; struct ieee80211_channel *channel; - unsigned long beacon_int; /* in jiffies unit */ + u64 beacon_int /* beacon interval in us */; unsigned int rx_filter; bool started, idle, scanning; struct mutex mutex; - struct timer_list beacon_timer; + struct tasklet_hrtimer beacon_timer; enum ps_mode { PS_DISABLED, PS_ENABLED, PS_AUTO_POLL, PS_MANUAL_POLL } ps; @@ -917,7 +917,7 @@ static void mac80211_hwsim_stop(struct ieee80211_hw *hw) { struct mac80211_hwsim_data *data = hw->priv; data->started = false; - del_timer(&data->beacon_timer); + tasklet_hrtimer_cancel(&data->beacon_timer); wiphy_debug(hw->wiphy, "%s\n", __func__); } @@ -1001,21 +1001,28 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac, rcu_dereference(vif->chanctx_conf)->def.chan); } - -static void mac80211_hwsim_beacon(unsigned long arg) +static enum hrtimer_restart +mac80211_hwsim_beacon(struct hrtimer *timer) { - struct ieee80211_hw *hw = (struct ieee80211_hw *) arg; - struct mac80211_hwsim_data *data = hw->priv; + struct mac80211_hwsim_data *data = + container_of(timer, struct mac80211_hwsim_data, + beacon_timer.timer); + struct ieee80211_hw *hw = data->hw; + u64 bcn_int = data->beacon_int; + ktime_t next_bcn; if (!data->started) - return; + goto out; ieee80211_iterate_active_interfaces_atomic( hw, IEEE80211_IFACE_ITER_NORMAL, mac80211_hwsim_beacon_tx, hw); - data->beacon_timer.expires = jiffies + data->beacon_int; - add_timer(&data->beacon_timer); + next_bcn = ktime_add(hrtimer_get_expires(timer), + ns_to_ktime(bcn_int * 1000)); + tasklet_hrtimer_start(&data->beacon_timer, next_bcn, HRTIMER_MODE_ABS); +out: + return HRTIMER_NORESTART; } static const char *hwsim_chantypes[] = { @@ -1053,9 +1060,12 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) data->power_level = conf->power_level; if (!data->started || !data->beacon_int) - del_timer(&data->beacon_timer); - else - mod_timer(&data->beacon_timer, jiffies + data->beacon_int); + tasklet_hrtimer_cancel(&data->beacon_timer); + else if (!hrtimer_is_queued(&data->beacon_timer.timer)) { + tasklet_hrtimer_start(&data->beacon_timer, + ns_to_ktime(data->beacon_int * 1000), + HRTIMER_MODE_REL); + } return 0; } @@ -1105,12 +1115,22 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_BEACON_INT) { wiphy_debug(hw->wiphy, " BCNINT: %d\n", info->beacon_int); - data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000; - if (WARN_ON(!data->beacon_int)) - data->beacon_int = 1; - if (data->started) - mod_timer(&data->beacon_timer, - jiffies + data->beacon_int); + data->beacon_int = info->beacon_int * 1024; + } + + if (changed & BSS_CHANGED_BEACON_ENABLED) { + wiphy_debug(hw->wiphy, " BCN EN: %d\n", info->enable_beacon); + if (data->started && + !hrtimer_is_queued(&data->beacon_timer.timer) && + info->enable_beacon) { + if (WARN_ON(!data->beacon_int)) + data->beacon_int = 1000 * 1024; + tasklet_hrtimer_start(&data->beacon_timer, + ns_to_ktime(data->beacon_int * + 1000), + HRTIMER_MODE_REL); + } else if (!info->enable_beacon) + tasklet_hrtimer_cancel(&data->beacon_timer); } if (changed & BSS_CHANGED_ERP_CTS_PROT) { @@ -2393,8 +2413,9 @@ static int __init init_mac80211_hwsim(void) data->debugfs, data, &hwsim_fops_group); - setup_timer(&data->beacon_timer, mac80211_hwsim_beacon, - (unsigned long) hw); + tasklet_hrtimer_init(&data->beacon_timer, + mac80211_hwsim_beacon, + CLOCK_REALTIME, HRTIMER_MODE_ABS); list_add_tail(&data->list, &hwsim_radios); } -- cgit v1.2.3 From c51f878379b1d0677619798b1d9358d053bdbdb1 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 2 Jan 2013 14:55:18 -0800 Subject: mac80211_hwsim: fix beacon timing A beacon period starts at TSF time 0. Spoof this by rounding the starting beacon time to a multiple of the beacon interval, and keep TBTT aligned on TSF adjustment. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 24 +++++++++++++++++++++--- 1 file changed, 21 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index c54c5d17a037..b6e2caa024a7 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -362,6 +362,7 @@ struct mac80211_hwsim_data { /* difference between this hw's clock and the real clock, in usecs */ s64 tsf_offset; + s64 bcn_delta; }; @@ -428,9 +429,12 @@ static void mac80211_hwsim_set_tsf(struct ieee80211_hw *hw, { struct mac80211_hwsim_data *data = hw->priv; u64 now = mac80211_hwsim_get_tsf(hw, vif); + u32 bcn_int = data->beacon_int; s64 delta = tsf - now; data->tsf_offset += delta; + /* adjust after beaconing with new timestamp at old TBTT */ + data->bcn_delta = do_div(delta, bcn_int); } static void mac80211_hwsim_monitor_rx(struct ieee80211_hw *hw, @@ -1018,6 +1022,12 @@ mac80211_hwsim_beacon(struct hrtimer *timer) hw, IEEE80211_IFACE_ITER_NORMAL, mac80211_hwsim_beacon_tx, hw); + /* beacon at new TBTT + beacon interval */ + if (data->bcn_delta) { + bcn_int -= data->bcn_delta; + data->bcn_delta = 0; + } + next_bcn = ktime_add(hrtimer_get_expires(timer), ns_to_ktime(bcn_int * 1000)); tasklet_hrtimer_start(&data->beacon_timer, next_bcn, HRTIMER_MODE_ABS); @@ -1062,8 +1072,12 @@ static int mac80211_hwsim_config(struct ieee80211_hw *hw, u32 changed) if (!data->started || !data->beacon_int) tasklet_hrtimer_cancel(&data->beacon_timer); else if (!hrtimer_is_queued(&data->beacon_timer.timer)) { + u64 tsf = mac80211_hwsim_get_tsf(hw, NULL); + u32 bcn_int = data->beacon_int; + u64 until_tbtt = bcn_int - do_div(tsf, bcn_int); + tasklet_hrtimer_start(&data->beacon_timer, - ns_to_ktime(data->beacon_int * 1000), + ns_to_ktime(until_tbtt * 1000), HRTIMER_MODE_REL); } @@ -1123,11 +1137,15 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, if (data->started && !hrtimer_is_queued(&data->beacon_timer.timer) && info->enable_beacon) { + u64 tsf, until_tbtt; + u32 bcn_int; if (WARN_ON(!data->beacon_int)) data->beacon_int = 1000 * 1024; + tsf = mac80211_hwsim_get_tsf(hw, vif); + bcn_int = data->beacon_int; + until_tbtt = bcn_int - do_div(tsf, bcn_int); tasklet_hrtimer_start(&data->beacon_timer, - ns_to_ktime(data->beacon_int * - 1000), + ns_to_ktime(until_tbtt * 1000), HRTIMER_MODE_REL); } else if (!info->enable_beacon) tasklet_hrtimer_cancel(&data->beacon_timer); -- cgit v1.2.3 From d5374ef13ebda6ec93f0b4af6b30682ea4b14782 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 12 Dec 2012 06:30:55 +0100 Subject: rt2800: refactor RFCSR initialization rt2800_init_rfcsr() is too big, split RF initialization into per chip functions. Code will change, but we should setup the same values onto RF registers and in the same order as before. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 795 +++++++++++++++++--------------- 1 file changed, 423 insertions(+), 372 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 12f93e42e160..0ece3537106d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3866,6 +3866,400 @@ static u8 rt2800_init_rx_filter(struct rt2x00_dev *rt2x00dev, return rfcsr24; } +static void rt2800_init_rfcsr_305x_soc(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 0, 0x50); + rt2800_rfcsr_write(rt2x00dev, 1, 0x01); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); + rt2800_rfcsr_write(rt2x00dev, 3, 0x75); + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x50); + rt2800_rfcsr_write(rt2x00dev, 8, 0x39); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x60); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x75); + rt2800_rfcsr_write(rt2x00dev, 13, 0x75); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x31); + rt2800_rfcsr_write(rt2x00dev, 24, 0x08); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 26, 0x25); + rt2800_rfcsr_write(rt2x00dev, 27, 0x23); + rt2800_rfcsr_write(rt2x00dev, 28, 0x13); + rt2800_rfcsr_write(rt2x00dev, 29, 0x83); + rt2800_rfcsr_write(rt2x00dev, 30, 0x00); + rt2800_rfcsr_write(rt2x00dev, 31, 0x00); +} + +static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x60); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x41); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 24, 0x16); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); +} + +static void rt2800_init_rfcsr_3290(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 2, 0x80); + rt2800_rfcsr_write(rt2x00dev, 3, 0x08); + rt2800_rfcsr_write(rt2x00dev, 4, 0x00); + rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 8, 0xf3); + rt2800_rfcsr_write(rt2x00dev, 9, 0x02); + rt2800_rfcsr_write(rt2x00dev, 10, 0x53); + rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 12, 0x46); + rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); + rt2800_rfcsr_write(rt2x00dev, 18, 0x02); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 25, 0x83); + rt2800_rfcsr_write(rt2x00dev, 26, 0x82); + rt2800_rfcsr_write(rt2x00dev, 27, 0x09); + rt2800_rfcsr_write(rt2x00dev, 29, 0x10); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x05); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 38, 0x85); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); + rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); + rt2800_rfcsr_write(rt2x00dev, 43, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); + rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); + rt2800_rfcsr_write(rt2x00dev, 46, 0x73); + rt2800_rfcsr_write(rt2x00dev, 47, 0x00); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 49, 0x98); + rt2800_rfcsr_write(rt2x00dev, 52, 0x38); + rt2800_rfcsr_write(rt2x00dev, 53, 0x00); + rt2800_rfcsr_write(rt2x00dev, 54, 0x78); + rt2800_rfcsr_write(rt2x00dev, 55, 0x43); + rt2800_rfcsr_write(rt2x00dev, 56, 0x02); + rt2800_rfcsr_write(rt2x00dev, 57, 0x80); + rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); + rt2800_rfcsr_write(rt2x00dev, 59, 0x09); + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + rt2800_rfcsr_write(rt2x00dev, 61, 0xc1); +} + +static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 0, 0xf0); + rt2800_rfcsr_write(rt2x00dev, 1, 0x23); + rt2800_rfcsr_write(rt2x00dev, 2, 0x50); + rt2800_rfcsr_write(rt2x00dev, 3, 0x18); + rt2800_rfcsr_write(rt2x00dev, 4, 0x00); + rt2800_rfcsr_write(rt2x00dev, 5, 0x00); + rt2800_rfcsr_write(rt2x00dev, 6, 0x33); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 8, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 9, 0x02); + rt2800_rfcsr_write(rt2x00dev, 10, 0xd2); + rt2800_rfcsr_write(rt2x00dev, 11, 0x42); + rt2800_rfcsr_write(rt2x00dev, 12, 0x1c); + rt2800_rfcsr_write(rt2x00dev, 13, 0x00); + rt2800_rfcsr_write(rt2x00dev, 14, 0x5a); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x01); + rt2800_rfcsr_write(rt2x00dev, 18, 0x45); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x00); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x00); + rt2800_rfcsr_write(rt2x00dev, 24, 0x00); + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + rt2800_rfcsr_write(rt2x00dev, 26, 0x00); + rt2800_rfcsr_write(rt2x00dev, 27, 0x03); + rt2800_rfcsr_write(rt2x00dev, 28, 0x03); + rt2800_rfcsr_write(rt2x00dev, 29, 0x00); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x01); + rt2800_rfcsr_write(rt2x00dev, 35, 0x03); + rt2800_rfcsr_write(rt2x00dev, 36, 0xbd); + rt2800_rfcsr_write(rt2x00dev, 37, 0x3c); + rt2800_rfcsr_write(rt2x00dev, 38, 0x5f); + rt2800_rfcsr_write(rt2x00dev, 39, 0xc5); + rt2800_rfcsr_write(rt2x00dev, 40, 0x33); + rt2800_rfcsr_write(rt2x00dev, 41, 0x5b); + rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); + rt2800_rfcsr_write(rt2x00dev, 43, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 44, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 45, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 46, 0xdd); + rt2800_rfcsr_write(rt2x00dev, 47, 0x0d); + rt2800_rfcsr_write(rt2x00dev, 48, 0x14); + rt2800_rfcsr_write(rt2x00dev, 49, 0x00); + rt2800_rfcsr_write(rt2x00dev, 50, 0x2d); + rt2800_rfcsr_write(rt2x00dev, 51, 0x7f); + rt2800_rfcsr_write(rt2x00dev, 52, 0x00); + rt2800_rfcsr_write(rt2x00dev, 53, 0x52); + rt2800_rfcsr_write(rt2x00dev, 54, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 55, 0x7f); + rt2800_rfcsr_write(rt2x00dev, 56, 0x00); + rt2800_rfcsr_write(rt2x00dev, 57, 0x52); + rt2800_rfcsr_write(rt2x00dev, 58, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 59, 0x00); + rt2800_rfcsr_write(rt2x00dev, 60, 0x00); + rt2800_rfcsr_write(rt2x00dev, 61, 0x00); + rt2800_rfcsr_write(rt2x00dev, 62, 0x00); + rt2800_rfcsr_write(rt2x00dev, 63, 0x00); +} + +static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 0, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 1, 0xe1); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 3, 0x62); + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x8b); + rt2800_rfcsr_write(rt2x00dev, 6, 0x42); + rt2800_rfcsr_write(rt2x00dev, 7, 0x34); + rt2800_rfcsr_write(rt2x00dev, 8, 0x00); + rt2800_rfcsr_write(rt2x00dev, 9, 0xc0); + rt2800_rfcsr_write(rt2x00dev, 10, 0x61); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x3b); + rt2800_rfcsr_write(rt2x00dev, 13, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x53); + rt2800_rfcsr_write(rt2x00dev, 16, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 17, 0x94); + rt2800_rfcsr_write(rt2x00dev, 18, 0x5c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 20, 0xb2); + rt2800_rfcsr_write(rt2x00dev, 21, 0xf6); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x14); + rt2800_rfcsr_write(rt2x00dev, 24, 0x08); + rt2800_rfcsr_write(rt2x00dev, 25, 0x3d); + rt2800_rfcsr_write(rt2x00dev, 26, 0x85); + rt2800_rfcsr_write(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write(rt2x00dev, 28, 0x41); + rt2800_rfcsr_write(rt2x00dev, 29, 0x8f); + rt2800_rfcsr_write(rt2x00dev, 30, 0x20); + rt2800_rfcsr_write(rt2x00dev, 31, 0x0f); +} + +static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 0, 0x70); + rt2800_rfcsr_write(rt2x00dev, 1, 0x81); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 3, 0x02); + rt2800_rfcsr_write(rt2x00dev, 4, 0x4c); + rt2800_rfcsr_write(rt2x00dev, 5, 0x05); + rt2800_rfcsr_write(rt2x00dev, 6, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 7, 0xd8); + rt2800_rfcsr_write(rt2x00dev, 9, 0xc3); + rt2800_rfcsr_write(rt2x00dev, 10, 0xf1); + rt2800_rfcsr_write(rt2x00dev, 11, 0xb9); + rt2800_rfcsr_write(rt2x00dev, 12, 0x70); + rt2800_rfcsr_write(rt2x00dev, 13, 0x65); + rt2800_rfcsr_write(rt2x00dev, 14, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 15, 0x53); + rt2800_rfcsr_write(rt2x00dev, 16, 0x4c); + rt2800_rfcsr_write(rt2x00dev, 17, 0x23); + rt2800_rfcsr_write(rt2x00dev, 18, 0xac); + rt2800_rfcsr_write(rt2x00dev, 19, 0x93); + rt2800_rfcsr_write(rt2x00dev, 20, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 21, 0xd0); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x3c); + rt2800_rfcsr_write(rt2x00dev, 24, 0x16); + rt2800_rfcsr_write(rt2x00dev, 25, 0x15); + rt2800_rfcsr_write(rt2x00dev, 26, 0x85); + rt2800_rfcsr_write(rt2x00dev, 27, 0x00); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x9b); + rt2800_rfcsr_write(rt2x00dev, 30, 0x09); + rt2800_rfcsr_write(rt2x00dev, 31, 0x10); +} + +static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 2, 0x80); + rt2800_rfcsr_write(rt2x00dev, 3, 0x88); + rt2800_rfcsr_write(rt2x00dev, 5, 0x10); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); + else + rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 10, 0x53); + rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 12, 0xc6); + rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); + rt2800_rfcsr_write(rt2x00dev, 14, 0x00); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x00); + rt2800_rfcsr_write(rt2x00dev, 18, 0x03); + rt2800_rfcsr_write(rt2x00dev, 19, 0x00); + + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x00); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 23, 0x00); + rt2800_rfcsr_write(rt2x00dev, 24, 0x00); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + else + rt2800_rfcsr_write(rt2x00dev, 25, 0xc0); + rt2800_rfcsr_write(rt2x00dev, 26, 0x00); + rt2800_rfcsr_write(rt2x00dev, 27, 0x09); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x10); + + rt2800_rfcsr_write(rt2x00dev, 30, 0x00); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x80); + rt2800_rfcsr_write(rt2x00dev, 33, 0x00); + rt2800_rfcsr_write(rt2x00dev, 34, 0x07); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 37, 0x08); + rt2800_rfcsr_write(rt2x00dev, 38, 0x85); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); + + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); + else + rt2800_rfcsr_write(rt2x00dev, 40, 0x4b); + rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 42, 0xd2); + rt2800_rfcsr_write(rt2x00dev, 43, 0x9a); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); + rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 46, 0x73); + else + rt2800_rfcsr_write(rt2x00dev, 46, 0x7b); + rt2800_rfcsr_write(rt2x00dev, 47, 0x00); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 49, 0x94); + + rt2800_rfcsr_write(rt2x00dev, 52, 0x38); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 53, 0x00); + else + rt2800_rfcsr_write(rt2x00dev, 53, 0x84); + rt2800_rfcsr_write(rt2x00dev, 54, 0x78); + rt2800_rfcsr_write(rt2x00dev, 55, 0x44); + rt2800_rfcsr_write(rt2x00dev, 56, 0x22); + rt2800_rfcsr_write(rt2x00dev, 57, 0x80); + rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); + rt2800_rfcsr_write(rt2x00dev, 59, 0x63); + + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) + rt2800_rfcsr_write(rt2x00dev, 61, 0xd1); + else + rt2800_rfcsr_write(rt2x00dev, 61, 0xdd); + rt2800_rfcsr_write(rt2x00dev, 62, 0x00); + rt2800_rfcsr_write(rt2x00dev, 63, 0x00); +} + +static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev) +{ + rt2800_rfcsr_write(rt2x00dev, 1, 0x17); + rt2800_rfcsr_write(rt2x00dev, 2, 0x80); + rt2800_rfcsr_write(rt2x00dev, 3, 0x88); + rt2800_rfcsr_write(rt2x00dev, 5, 0x10); + rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); + rt2800_rfcsr_write(rt2x00dev, 7, 0x00); + rt2800_rfcsr_write(rt2x00dev, 10, 0x53); + rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); + rt2800_rfcsr_write(rt2x00dev, 12, 0x46); + rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); + rt2800_rfcsr_write(rt2x00dev, 14, 0x00); + rt2800_rfcsr_write(rt2x00dev, 15, 0x00); + rt2800_rfcsr_write(rt2x00dev, 16, 0x00); + rt2800_rfcsr_write(rt2x00dev, 18, 0x03); + rt2800_rfcsr_write(rt2x00dev, 19, 0x4d); + rt2800_rfcsr_write(rt2x00dev, 20, 0x00); + rt2800_rfcsr_write(rt2x00dev, 21, 0x8d); + rt2800_rfcsr_write(rt2x00dev, 22, 0x20); + rt2800_rfcsr_write(rt2x00dev, 23, 0x0b); + rt2800_rfcsr_write(rt2x00dev, 24, 0x44); + rt2800_rfcsr_write(rt2x00dev, 25, 0x80); + rt2800_rfcsr_write(rt2x00dev, 26, 0x82); + rt2800_rfcsr_write(rt2x00dev, 27, 0x09); + rt2800_rfcsr_write(rt2x00dev, 28, 0x00); + rt2800_rfcsr_write(rt2x00dev, 29, 0x10); + rt2800_rfcsr_write(rt2x00dev, 30, 0x10); + rt2800_rfcsr_write(rt2x00dev, 31, 0x80); + rt2800_rfcsr_write(rt2x00dev, 32, 0x20); + rt2800_rfcsr_write(rt2x00dev, 33, 0xC0); + rt2800_rfcsr_write(rt2x00dev, 34, 0x07); + rt2800_rfcsr_write(rt2x00dev, 35, 0x12); + rt2800_rfcsr_write(rt2x00dev, 36, 0x00); + rt2800_rfcsr_write(rt2x00dev, 37, 0x08); + rt2800_rfcsr_write(rt2x00dev, 38, 0x89); + rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); + rt2800_rfcsr_write(rt2x00dev, 40, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); + rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); + rt2800_rfcsr_write(rt2x00dev, 43, 0x9b); + rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); + rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); + rt2800_rfcsr_write(rt2x00dev, 46, 0x73); + rt2800_rfcsr_write(rt2x00dev, 47, 0x0c); + rt2800_rfcsr_write(rt2x00dev, 48, 0x10); + rt2800_rfcsr_write(rt2x00dev, 49, 0x94); + rt2800_rfcsr_write(rt2x00dev, 50, 0x94); + rt2800_rfcsr_write(rt2x00dev, 51, 0x3a); + rt2800_rfcsr_write(rt2x00dev, 52, 0x48); + rt2800_rfcsr_write(rt2x00dev, 53, 0x44); + rt2800_rfcsr_write(rt2x00dev, 54, 0x38); + rt2800_rfcsr_write(rt2x00dev, 55, 0x43); + rt2800_rfcsr_write(rt2x00dev, 56, 0xa1); + rt2800_rfcsr_write(rt2x00dev, 57, 0x00); + rt2800_rfcsr_write(rt2x00dev, 58, 0x39); + rt2800_rfcsr_write(rt2x00dev, 59, 0x07); + rt2800_rfcsr_write(rt2x00dev, 60, 0x45); + rt2800_rfcsr_write(rt2x00dev, 61, 0x91); + rt2800_rfcsr_write(rt2x00dev, 62, 0x39); + rt2800_rfcsr_write(rt2x00dev, 63, 0x07); +} + static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) { struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; @@ -3889,6 +4283,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) /* * Init RF calibration. */ + if (rt2x00_rt(rt2x00dev, RT3290) || rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392)) { @@ -3907,379 +4302,35 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 30, rfcsr); } - if (rt2x00_rt(rt2x00dev, RT3070) || - rt2x00_rt(rt2x00dev, RT3071) || - rt2x00_rt(rt2x00dev, RT3090)) { - rt2800_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800_rfcsr_write(rt2x00dev, 5, 0x03); - rt2800_rfcsr_write(rt2x00dev, 6, 0x02); - rt2800_rfcsr_write(rt2x00dev, 7, 0x60); - rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 10, 0x41); - rt2800_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800_rfcsr_write(rt2x00dev, 12, 0x7b); - rt2800_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800_rfcsr_write(rt2x00dev, 15, 0x58); - rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); - rt2800_rfcsr_write(rt2x00dev, 17, 0x92); - rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); - rt2800_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800_rfcsr_write(rt2x00dev, 20, 0xba); - rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800_rfcsr_write(rt2x00dev, 25, 0x01); - rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); - } else if (rt2x00_rt(rt2x00dev, RT3290)) { - rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); - rt2800_rfcsr_write(rt2x00dev, 3, 0x08); - rt2800_rfcsr_write(rt2x00dev, 4, 0x00); - rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 8, 0xf3); - rt2800_rfcsr_write(rt2x00dev, 9, 0x02); - rt2800_rfcsr_write(rt2x00dev, 10, 0x53); - rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 12, 0x46); - rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); - rt2800_rfcsr_write(rt2x00dev, 18, 0x02); - rt2800_rfcsr_write(rt2x00dev, 22, 0x20); - rt2800_rfcsr_write(rt2x00dev, 25, 0x83); - rt2800_rfcsr_write(rt2x00dev, 26, 0x82); - rt2800_rfcsr_write(rt2x00dev, 27, 0x09); - rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - rt2800_rfcsr_write(rt2x00dev, 33, 0x00); - rt2800_rfcsr_write(rt2x00dev, 34, 0x05); - rt2800_rfcsr_write(rt2x00dev, 35, 0x12); - rt2800_rfcsr_write(rt2x00dev, 36, 0x00); - rt2800_rfcsr_write(rt2x00dev, 38, 0x85); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); - rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); - rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); - rt2800_rfcsr_write(rt2x00dev, 43, 0x7b); - rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); - rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); - rt2800_rfcsr_write(rt2x00dev, 46, 0x73); - rt2800_rfcsr_write(rt2x00dev, 47, 0x00); - rt2800_rfcsr_write(rt2x00dev, 48, 0x10); - rt2800_rfcsr_write(rt2x00dev, 49, 0x98); - rt2800_rfcsr_write(rt2x00dev, 52, 0x38); - rt2800_rfcsr_write(rt2x00dev, 53, 0x00); - rt2800_rfcsr_write(rt2x00dev, 54, 0x78); - rt2800_rfcsr_write(rt2x00dev, 55, 0x43); - rt2800_rfcsr_write(rt2x00dev, 56, 0x02); - rt2800_rfcsr_write(rt2x00dev, 57, 0x80); - rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 59, 0x09); - rt2800_rfcsr_write(rt2x00dev, 60, 0x45); - rt2800_rfcsr_write(rt2x00dev, 61, 0xc1); - } else if (rt2x00_rt(rt2x00dev, RT3390)) { - rt2800_rfcsr_write(rt2x00dev, 0, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 1, 0xe1); - rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 3, 0x62); - rt2800_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800_rfcsr_write(rt2x00dev, 5, 0x8b); - rt2800_rfcsr_write(rt2x00dev, 6, 0x42); - rt2800_rfcsr_write(rt2x00dev, 7, 0x34); - rt2800_rfcsr_write(rt2x00dev, 8, 0x00); - rt2800_rfcsr_write(rt2x00dev, 9, 0xc0); - rt2800_rfcsr_write(rt2x00dev, 10, 0x61); - rt2800_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800_rfcsr_write(rt2x00dev, 12, 0x3b); - rt2800_rfcsr_write(rt2x00dev, 13, 0xe0); - rt2800_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800_rfcsr_write(rt2x00dev, 15, 0x53); - rt2800_rfcsr_write(rt2x00dev, 16, 0xe0); - rt2800_rfcsr_write(rt2x00dev, 17, 0x94); - rt2800_rfcsr_write(rt2x00dev, 18, 0x5c); - rt2800_rfcsr_write(rt2x00dev, 19, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 20, 0xb2); - rt2800_rfcsr_write(rt2x00dev, 21, 0xf6); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x14); - rt2800_rfcsr_write(rt2x00dev, 24, 0x08); - rt2800_rfcsr_write(rt2x00dev, 25, 0x3d); - rt2800_rfcsr_write(rt2x00dev, 26, 0x85); - rt2800_rfcsr_write(rt2x00dev, 27, 0x00); - rt2800_rfcsr_write(rt2x00dev, 28, 0x41); - rt2800_rfcsr_write(rt2x00dev, 29, 0x8f); - rt2800_rfcsr_write(rt2x00dev, 30, 0x20); - rt2800_rfcsr_write(rt2x00dev, 31, 0x0f); - } else if (rt2x00_rt(rt2x00dev, RT3572)) { - rt2800_rfcsr_write(rt2x00dev, 0, 0x70); - rt2800_rfcsr_write(rt2x00dev, 1, 0x81); - rt2800_rfcsr_write(rt2x00dev, 2, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 3, 0x02); - rt2800_rfcsr_write(rt2x00dev, 4, 0x4c); - rt2800_rfcsr_write(rt2x00dev, 5, 0x05); - rt2800_rfcsr_write(rt2x00dev, 6, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 7, 0xd8); - rt2800_rfcsr_write(rt2x00dev, 9, 0xc3); - rt2800_rfcsr_write(rt2x00dev, 10, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 11, 0xb9); - rt2800_rfcsr_write(rt2x00dev, 12, 0x70); - rt2800_rfcsr_write(rt2x00dev, 13, 0x65); - rt2800_rfcsr_write(rt2x00dev, 14, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 15, 0x53); - rt2800_rfcsr_write(rt2x00dev, 16, 0x4c); - rt2800_rfcsr_write(rt2x00dev, 17, 0x23); - rt2800_rfcsr_write(rt2x00dev, 18, 0xac); - rt2800_rfcsr_write(rt2x00dev, 19, 0x93); - rt2800_rfcsr_write(rt2x00dev, 20, 0xb3); - rt2800_rfcsr_write(rt2x00dev, 21, 0xd0); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x3c); - rt2800_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800_rfcsr_write(rt2x00dev, 25, 0x15); - rt2800_rfcsr_write(rt2x00dev, 26, 0x85); - rt2800_rfcsr_write(rt2x00dev, 27, 0x00); - rt2800_rfcsr_write(rt2x00dev, 28, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x9b); - rt2800_rfcsr_write(rt2x00dev, 30, 0x09); - rt2800_rfcsr_write(rt2x00dev, 31, 0x10); - } else if (rt2800_is_305x_soc(rt2x00dev)) { - rt2800_rfcsr_write(rt2x00dev, 0, 0x50); - rt2800_rfcsr_write(rt2x00dev, 1, 0x01); - rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); - rt2800_rfcsr_write(rt2x00dev, 3, 0x75); - rt2800_rfcsr_write(rt2x00dev, 4, 0x40); - rt2800_rfcsr_write(rt2x00dev, 5, 0x03); - rt2800_rfcsr_write(rt2x00dev, 6, 0x02); - rt2800_rfcsr_write(rt2x00dev, 7, 0x50); - rt2800_rfcsr_write(rt2x00dev, 8, 0x39); - rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 10, 0x60); - rt2800_rfcsr_write(rt2x00dev, 11, 0x21); - rt2800_rfcsr_write(rt2x00dev, 12, 0x75); - rt2800_rfcsr_write(rt2x00dev, 13, 0x75); - rt2800_rfcsr_write(rt2x00dev, 14, 0x90); - rt2800_rfcsr_write(rt2x00dev, 15, 0x58); - rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); - rt2800_rfcsr_write(rt2x00dev, 17, 0x92); - rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); - rt2800_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800_rfcsr_write(rt2x00dev, 20, 0xba); - rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x31); - rt2800_rfcsr_write(rt2x00dev, 24, 0x08); - rt2800_rfcsr_write(rt2x00dev, 25, 0x01); - rt2800_rfcsr_write(rt2x00dev, 26, 0x25); - rt2800_rfcsr_write(rt2x00dev, 27, 0x23); - rt2800_rfcsr_write(rt2x00dev, 28, 0x13); - rt2800_rfcsr_write(rt2x00dev, 29, 0x83); - rt2800_rfcsr_write(rt2x00dev, 30, 0x00); - rt2800_rfcsr_write(rt2x00dev, 31, 0x00); + if (rt2800_is_305x_soc(rt2x00dev)) { + rt2800_init_rfcsr_305x_soc(rt2x00dev); return 0; - } else if (rt2x00_rt(rt2x00dev, RT3352)) { - rt2800_rfcsr_write(rt2x00dev, 0, 0xf0); - rt2800_rfcsr_write(rt2x00dev, 1, 0x23); - rt2800_rfcsr_write(rt2x00dev, 2, 0x50); - rt2800_rfcsr_write(rt2x00dev, 3, 0x18); - rt2800_rfcsr_write(rt2x00dev, 4, 0x00); - rt2800_rfcsr_write(rt2x00dev, 5, 0x00); - rt2800_rfcsr_write(rt2x00dev, 6, 0x33); - rt2800_rfcsr_write(rt2x00dev, 7, 0x00); - rt2800_rfcsr_write(rt2x00dev, 8, 0xf1); - rt2800_rfcsr_write(rt2x00dev, 9, 0x02); - rt2800_rfcsr_write(rt2x00dev, 10, 0xd2); - rt2800_rfcsr_write(rt2x00dev, 11, 0x42); - rt2800_rfcsr_write(rt2x00dev, 12, 0x1c); - rt2800_rfcsr_write(rt2x00dev, 13, 0x00); - rt2800_rfcsr_write(rt2x00dev, 14, 0x5a); - rt2800_rfcsr_write(rt2x00dev, 15, 0x00); - rt2800_rfcsr_write(rt2x00dev, 16, 0x01); - rt2800_rfcsr_write(rt2x00dev, 18, 0x45); - rt2800_rfcsr_write(rt2x00dev, 19, 0x02); - rt2800_rfcsr_write(rt2x00dev, 20, 0x00); - rt2800_rfcsr_write(rt2x00dev, 21, 0x00); - rt2800_rfcsr_write(rt2x00dev, 22, 0x00); - rt2800_rfcsr_write(rt2x00dev, 23, 0x00); - rt2800_rfcsr_write(rt2x00dev, 24, 0x00); - rt2800_rfcsr_write(rt2x00dev, 25, 0x80); - rt2800_rfcsr_write(rt2x00dev, 26, 0x00); - rt2800_rfcsr_write(rt2x00dev, 27, 0x03); - rt2800_rfcsr_write(rt2x00dev, 28, 0x03); - rt2800_rfcsr_write(rt2x00dev, 29, 0x00); - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - rt2800_rfcsr_write(rt2x00dev, 33, 0x00); - rt2800_rfcsr_write(rt2x00dev, 34, 0x01); - rt2800_rfcsr_write(rt2x00dev, 35, 0x03); - rt2800_rfcsr_write(rt2x00dev, 36, 0xbd); - rt2800_rfcsr_write(rt2x00dev, 37, 0x3c); - rt2800_rfcsr_write(rt2x00dev, 38, 0x5f); - rt2800_rfcsr_write(rt2x00dev, 39, 0xc5); - rt2800_rfcsr_write(rt2x00dev, 40, 0x33); - rt2800_rfcsr_write(rt2x00dev, 41, 0x5b); - rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); - rt2800_rfcsr_write(rt2x00dev, 43, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 44, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 45, 0xdb); - rt2800_rfcsr_write(rt2x00dev, 46, 0xdd); - rt2800_rfcsr_write(rt2x00dev, 47, 0x0d); - rt2800_rfcsr_write(rt2x00dev, 48, 0x14); - rt2800_rfcsr_write(rt2x00dev, 49, 0x00); - rt2800_rfcsr_write(rt2x00dev, 50, 0x2d); - rt2800_rfcsr_write(rt2x00dev, 51, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 52, 0x00); - rt2800_rfcsr_write(rt2x00dev, 53, 0x52); - rt2800_rfcsr_write(rt2x00dev, 54, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 55, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 56, 0x00); - rt2800_rfcsr_write(rt2x00dev, 57, 0x52); - rt2800_rfcsr_write(rt2x00dev, 58, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 59, 0x00); - rt2800_rfcsr_write(rt2x00dev, 60, 0x00); - rt2800_rfcsr_write(rt2x00dev, 61, 0x00); - rt2800_rfcsr_write(rt2x00dev, 62, 0x00); - rt2800_rfcsr_write(rt2x00dev, 63, 0x00); - } else if (rt2x00_rt(rt2x00dev, RT5390)) { - rt2800_rfcsr_write(rt2x00dev, 1, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); - rt2800_rfcsr_write(rt2x00dev, 3, 0x88); - rt2800_rfcsr_write(rt2x00dev, 5, 0x10); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); - else - rt2800_rfcsr_write(rt2x00dev, 6, 0xa0); - rt2800_rfcsr_write(rt2x00dev, 7, 0x00); - rt2800_rfcsr_write(rt2x00dev, 10, 0x53); - rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 12, 0xc6); - rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); - rt2800_rfcsr_write(rt2x00dev, 14, 0x00); - rt2800_rfcsr_write(rt2x00dev, 15, 0x00); - rt2800_rfcsr_write(rt2x00dev, 16, 0x00); - rt2800_rfcsr_write(rt2x00dev, 18, 0x03); - rt2800_rfcsr_write(rt2x00dev, 19, 0x00); - - rt2800_rfcsr_write(rt2x00dev, 20, 0x00); - rt2800_rfcsr_write(rt2x00dev, 21, 0x00); - rt2800_rfcsr_write(rt2x00dev, 22, 0x20); - rt2800_rfcsr_write(rt2x00dev, 23, 0x00); - rt2800_rfcsr_write(rt2x00dev, 24, 0x00); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 25, 0x80); - else - rt2800_rfcsr_write(rt2x00dev, 25, 0xc0); - rt2800_rfcsr_write(rt2x00dev, 26, 0x00); - rt2800_rfcsr_write(rt2x00dev, 27, 0x09); - rt2800_rfcsr_write(rt2x00dev, 28, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - - rt2800_rfcsr_write(rt2x00dev, 30, 0x00); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - rt2800_rfcsr_write(rt2x00dev, 33, 0x00); - rt2800_rfcsr_write(rt2x00dev, 34, 0x07); - rt2800_rfcsr_write(rt2x00dev, 35, 0x12); - rt2800_rfcsr_write(rt2x00dev, 36, 0x00); - rt2800_rfcsr_write(rt2x00dev, 37, 0x08); - rt2800_rfcsr_write(rt2x00dev, 38, 0x85); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); - - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 40, 0x0b); - else - rt2800_rfcsr_write(rt2x00dev, 40, 0x4b); - rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); - rt2800_rfcsr_write(rt2x00dev, 42, 0xd2); - rt2800_rfcsr_write(rt2x00dev, 43, 0x9a); - rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); - rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 46, 0x73); - else - rt2800_rfcsr_write(rt2x00dev, 46, 0x7b); - rt2800_rfcsr_write(rt2x00dev, 47, 0x00); - rt2800_rfcsr_write(rt2x00dev, 48, 0x10); - rt2800_rfcsr_write(rt2x00dev, 49, 0x94); - - rt2800_rfcsr_write(rt2x00dev, 52, 0x38); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 53, 0x00); - else - rt2800_rfcsr_write(rt2x00dev, 53, 0x84); - rt2800_rfcsr_write(rt2x00dev, 54, 0x78); - rt2800_rfcsr_write(rt2x00dev, 55, 0x44); - rt2800_rfcsr_write(rt2x00dev, 56, 0x22); - rt2800_rfcsr_write(rt2x00dev, 57, 0x80); - rt2800_rfcsr_write(rt2x00dev, 58, 0x7f); - rt2800_rfcsr_write(rt2x00dev, 59, 0x63); - - rt2800_rfcsr_write(rt2x00dev, 60, 0x45); - if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390F)) - rt2800_rfcsr_write(rt2x00dev, 61, 0xd1); - else - rt2800_rfcsr_write(rt2x00dev, 61, 0xdd); - rt2800_rfcsr_write(rt2x00dev, 62, 0x00); - rt2800_rfcsr_write(rt2x00dev, 63, 0x00); - } else if (rt2x00_rt(rt2x00dev, RT5392)) { - rt2800_rfcsr_write(rt2x00dev, 1, 0x17); - rt2800_rfcsr_write(rt2x00dev, 2, 0x80); - rt2800_rfcsr_write(rt2x00dev, 3, 0x88); - rt2800_rfcsr_write(rt2x00dev, 5, 0x10); - rt2800_rfcsr_write(rt2x00dev, 6, 0xe0); - rt2800_rfcsr_write(rt2x00dev, 7, 0x00); - rt2800_rfcsr_write(rt2x00dev, 10, 0x53); - rt2800_rfcsr_write(rt2x00dev, 11, 0x4a); - rt2800_rfcsr_write(rt2x00dev, 12, 0x46); - rt2800_rfcsr_write(rt2x00dev, 13, 0x9f); - rt2800_rfcsr_write(rt2x00dev, 14, 0x00); - rt2800_rfcsr_write(rt2x00dev, 15, 0x00); - rt2800_rfcsr_write(rt2x00dev, 16, 0x00); - rt2800_rfcsr_write(rt2x00dev, 18, 0x03); - rt2800_rfcsr_write(rt2x00dev, 19, 0x4d); - rt2800_rfcsr_write(rt2x00dev, 20, 0x00); - rt2800_rfcsr_write(rt2x00dev, 21, 0x8d); - rt2800_rfcsr_write(rt2x00dev, 22, 0x20); - rt2800_rfcsr_write(rt2x00dev, 23, 0x0b); - rt2800_rfcsr_write(rt2x00dev, 24, 0x44); - rt2800_rfcsr_write(rt2x00dev, 25, 0x80); - rt2800_rfcsr_write(rt2x00dev, 26, 0x82); - rt2800_rfcsr_write(rt2x00dev, 27, 0x09); - rt2800_rfcsr_write(rt2x00dev, 28, 0x00); - rt2800_rfcsr_write(rt2x00dev, 29, 0x10); - rt2800_rfcsr_write(rt2x00dev, 30, 0x10); - rt2800_rfcsr_write(rt2x00dev, 31, 0x80); - rt2800_rfcsr_write(rt2x00dev, 32, 0x20); - rt2800_rfcsr_write(rt2x00dev, 33, 0xC0); - rt2800_rfcsr_write(rt2x00dev, 34, 0x07); - rt2800_rfcsr_write(rt2x00dev, 35, 0x12); - rt2800_rfcsr_write(rt2x00dev, 36, 0x00); - rt2800_rfcsr_write(rt2x00dev, 37, 0x08); - rt2800_rfcsr_write(rt2x00dev, 38, 0x89); - rt2800_rfcsr_write(rt2x00dev, 39, 0x1b); - rt2800_rfcsr_write(rt2x00dev, 40, 0x0f); - rt2800_rfcsr_write(rt2x00dev, 41, 0xbb); - rt2800_rfcsr_write(rt2x00dev, 42, 0xd5); - rt2800_rfcsr_write(rt2x00dev, 43, 0x9b); - rt2800_rfcsr_write(rt2x00dev, 44, 0x0e); - rt2800_rfcsr_write(rt2x00dev, 45, 0xa2); - rt2800_rfcsr_write(rt2x00dev, 46, 0x73); - rt2800_rfcsr_write(rt2x00dev, 47, 0x0c); - rt2800_rfcsr_write(rt2x00dev, 48, 0x10); - rt2800_rfcsr_write(rt2x00dev, 49, 0x94); - rt2800_rfcsr_write(rt2x00dev, 50, 0x94); - rt2800_rfcsr_write(rt2x00dev, 51, 0x3a); - rt2800_rfcsr_write(rt2x00dev, 52, 0x48); - rt2800_rfcsr_write(rt2x00dev, 53, 0x44); - rt2800_rfcsr_write(rt2x00dev, 54, 0x38); - rt2800_rfcsr_write(rt2x00dev, 55, 0x43); - rt2800_rfcsr_write(rt2x00dev, 56, 0xa1); - rt2800_rfcsr_write(rt2x00dev, 57, 0x00); - rt2800_rfcsr_write(rt2x00dev, 58, 0x39); - rt2800_rfcsr_write(rt2x00dev, 59, 0x07); - rt2800_rfcsr_write(rt2x00dev, 60, 0x45); - rt2800_rfcsr_write(rt2x00dev, 61, 0x91); - rt2800_rfcsr_write(rt2x00dev, 62, 0x39); - rt2800_rfcsr_write(rt2x00dev, 63, 0x07); + } + + switch (rt2x00dev->chip.rt) { + case RT3070: + case RT3071: + case RT3090: + rt2800_init_rfcsr_30xx(rt2x00dev); + break; + case RT3290: + rt2800_init_rfcsr_3290(rt2x00dev); + break; + case RT3352: + rt2800_init_rfcsr_3352(rt2x00dev); + break; + case RT3390: + rt2800_init_rfcsr_3390(rt2x00dev); + break; + case RT3572: + rt2800_init_rfcsr_3572(rt2x00dev); + break; + case RT5390: + rt2800_init_rfcsr_5390(rt2x00dev); + break; + case RT5392: + rt2800_init_rfcsr_5392(rt2x00dev); + break; } if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { -- cgit v1.2.3 From b81950b165ff71d826fcac851153f9265a83d9ab Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 12 Dec 2012 13:14:22 +0100 Subject: ath9k: use the devres API for allocations/mappings Signed-off-by: Felix Fietkau Acked-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ahb.c | 22 ++------ drivers/net/wireless/ath/ath9k/ath9k.h | 5 -- drivers/net/wireless/ath/ath9k/init.c | 100 ++++++++++----------------------- drivers/net/wireless/ath/ath9k/mci.c | 7 +-- drivers/net/wireless/ath/ath9k/pci.c | 39 +++---------- drivers/net/wireless/ath/ath9k/recv.c | 11 +--- drivers/net/wireless/ath/ath9k/xmit.c | 37 ++---------- 7 files changed, 51 insertions(+), 170 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c index 3a69804f4c16..d1ff3c246a12 100644 --- a/drivers/net/wireless/ath/ath9k/ahb.c +++ b/drivers/net/wireless/ath/ath9k/ahb.c @@ -86,29 +86,25 @@ static int ath_ahb_probe(struct platform_device *pdev) if (!pdev->dev.platform_data) { dev_err(&pdev->dev, "no platform data specified\n"); - ret = -EINVAL; - goto err_out; + return -EINVAL; } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "no memory resource found\n"); - ret = -ENXIO; - goto err_out; + return -ENXIO; } - mem = ioremap_nocache(res->start, resource_size(res)); + mem = devm_ioremap_nocache(&pdev->dev, res->start, resource_size(res)); if (mem == NULL) { dev_err(&pdev->dev, "ioremap failed\n"); - ret = -ENOMEM; - goto err_out; + return -ENOMEM; } res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { dev_err(&pdev->dev, "no IRQ resource found\n"); - ret = -ENXIO; - goto err_iounmap; + return -ENXIO; } irq = res->start; @@ -116,8 +112,7 @@ static int ath_ahb_probe(struct platform_device *pdev) hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops); if (hw == NULL) { dev_err(&pdev->dev, "no memory for ieee80211_hw\n"); - ret = -ENOMEM; - goto err_iounmap; + return -ENOMEM; } SET_IEEE80211_DEV(hw, &pdev->dev); @@ -156,9 +151,6 @@ static int ath_ahb_probe(struct platform_device *pdev) err_free_hw: ieee80211_free_hw(hw); platform_set_drvdata(pdev, NULL); - err_iounmap: - iounmap(mem); - err_out: return ret; } @@ -168,12 +160,10 @@ static int ath_ahb_remove(struct platform_device *pdev) if (hw) { struct ath_softc *sc = hw->priv; - void __iomem *mem = sc->mem; ath9k_deinit_device(sc); free_irq(sc->irq, sc); ieee80211_free_hw(sc->hw); - iounmap(mem); platform_set_drvdata(pdev, NULL); } diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 86e26a19efda..72501073b499 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -109,14 +109,11 @@ struct ath_descdma { void *dd_desc; dma_addr_t dd_desc_paddr; u32 dd_desc_len; - struct ath_buf *dd_bufptr; }; int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, struct list_head *head, const char *name, int nbuf, int ndesc, bool is_tx); -void ath_descdma_cleanup(struct ath_softc *sc, struct ath_descdma *dd, - struct list_head *head); /***********/ /* RX / TX */ @@ -320,7 +317,6 @@ struct ath_rx { spinlock_t rxbuflock; struct list_head rxbuf; struct ath_descdma rxdma; - struct ath_buf *rx_bufptr; struct ath_rx_edma rx_edma[ATH9K_RX_QUEUE_MAX]; struct sk_buff *frag; @@ -345,7 +341,6 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an); void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an); void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq); int ath_tx_init(struct ath_softc *sc, int nbufs); -void ath_tx_cleanup(struct ath_softc *sc); int ath_txq_update(struct ath_softc *sc, int qnum, struct ath9k_tx_queue_info *q); void ath_update_max_aggr_framelen(struct ath_softc *sc, int queue, int txop); diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index f69ef5d48c7b..0f00a1306ac0 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -337,7 +337,7 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, struct ath_common *common = ath9k_hw_common(sc->sc_ah); u8 *ds; struct ath_buf *bf; - int i, bsize, error, desc_len; + int i, bsize, desc_len; ath_dbg(common, CONFIG, "%s DMA: %u buffers %u desc/buf\n", name, nbuf, ndesc); @@ -353,8 +353,7 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, if ((desc_len % 4) != 0) { ath_err(common, "ath_desc not DWORD aligned\n"); BUG_ON((desc_len % 4) != 0); - error = -ENOMEM; - goto fail; + return -ENOMEM; } dd->dd_desc_len = desc_len * nbuf * ndesc; @@ -378,12 +377,11 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, } /* allocate descriptors */ - dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len, - &dd->dd_desc_paddr, GFP_KERNEL); - if (dd->dd_desc == NULL) { - error = -ENOMEM; - goto fail; - } + dd->dd_desc = dmam_alloc_coherent(sc->dev, dd->dd_desc_len, + &dd->dd_desc_paddr, GFP_KERNEL); + if (!dd->dd_desc) + return -ENOMEM; + ds = (u8 *) dd->dd_desc; ath_dbg(common, CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n", name, ds, (u32) dd->dd_desc_len, @@ -391,12 +389,9 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, /* allocate buffers */ bsize = sizeof(struct ath_buf) * nbuf; - bf = kzalloc(bsize, GFP_KERNEL); - if (bf == NULL) { - error = -ENOMEM; - goto fail2; - } - dd->dd_bufptr = bf; + bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL); + if (!bf) + return -ENOMEM; for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) { bf->bf_desc = ds; @@ -422,12 +417,6 @@ int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, list_add_tail(&bf->list, head); } return 0; -fail2: - dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc, - dd->dd_desc_paddr); -fail: - memset(dd, 0, sizeof(*dd)); - return error; } static int ath9k_init_queues(struct ath_softc *sc) @@ -457,11 +446,13 @@ static int ath9k_init_channels_rates(struct ath_softc *sc) ATH9K_NUM_CHANNELS); if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) { - channels = kmemdup(ath9k_2ghz_chantable, + channels = devm_kzalloc(sc->dev, sizeof(ath9k_2ghz_chantable), GFP_KERNEL); if (!channels) return -ENOMEM; + memcpy(channels, ath9k_2ghz_chantable, + sizeof(ath9k_2ghz_chantable)); sc->sbands[IEEE80211_BAND_2GHZ].channels = channels; sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; sc->sbands[IEEE80211_BAND_2GHZ].n_channels = @@ -472,14 +463,13 @@ static int ath9k_init_channels_rates(struct ath_softc *sc) } if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) { - channels = kmemdup(ath9k_5ghz_chantable, + channels = devm_kzalloc(sc->dev, sizeof(ath9k_5ghz_chantable), GFP_KERNEL); - if (!channels) { - if (sc->sbands[IEEE80211_BAND_2GHZ].channels) - kfree(sc->sbands[IEEE80211_BAND_2GHZ].channels); + if (!channels) return -ENOMEM; - } + memcpy(channels, ath9k_5ghz_chantable, + sizeof(ath9k_5ghz_chantable)); sc->sbands[IEEE80211_BAND_5GHZ].channels = channels; sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ; sc->sbands[IEEE80211_BAND_5GHZ].n_channels = @@ -565,7 +555,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, int ret = 0, i; int csz = 0; - ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL); + ah = devm_kzalloc(sc->dev, sizeof(struct ath_hw), GFP_KERNEL); if (!ah) return -ENOMEM; @@ -636,7 +626,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, if (pdata && pdata->eeprom_name) { ret = ath9k_eeprom_request(sc, pdata->eeprom_name); if (ret) - goto err_eeprom; + return ret; } /* Initializes the hardware for all supported chipsets */ @@ -676,10 +666,6 @@ err_queues: ath9k_hw_deinit(ah); err_hw: ath9k_eeprom_release(sc); -err_eeprom: - kfree(ah); - sc->sc_ah = NULL; - return ret; } @@ -844,8 +830,8 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, /* Bring up device */ error = ath9k_init_softc(devid, sc, bus_ops); - if (error != 0) - goto error_init; + if (error) + return error; ah = sc->sc_ah; common = ath9k_hw_common(ah); @@ -855,19 +841,19 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, error = ath_regd_init(&common->regulatory, sc->hw->wiphy, ath9k_reg_notifier); if (error) - goto error_regd; + goto deinit; reg = &common->regulatory; /* Setup TX DMA */ error = ath_tx_init(sc, ATH_TXBUF); if (error != 0) - goto error_tx; + goto deinit; /* Setup RX DMA */ error = ath_rx_init(sc, ATH_RXBUF); if (error != 0) - goto error_rx; + goto deinit; ath9k_init_txpower_limits(sc); @@ -881,19 +867,19 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, /* Register with mac80211 */ error = ieee80211_register_hw(hw); if (error) - goto error_register; + goto rx_cleanup; error = ath9k_init_debug(ah); if (error) { ath_err(common, "Unable to create debugfs files\n"); - goto error_world; + goto unregister; } /* Handle world regulatory */ if (!ath_is_world_regd(reg)) { error = regulatory_hint(hw->wiphy, reg->alpha2); if (error) - goto error_world; + goto unregister; } ath_init_leds(sc); @@ -901,17 +887,12 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, return 0; -error_world: +unregister: ieee80211_unregister_hw(hw); -error_register: +rx_cleanup: ath_rx_cleanup(sc); -error_rx: - ath_tx_cleanup(sc); -error_tx: - /* Nothing */ -error_regd: +deinit: ath9k_deinit_softc(sc); -error_init: return error; } @@ -923,12 +904,6 @@ static void ath9k_deinit_softc(struct ath_softc *sc) { int i = 0; - if (sc->sbands[IEEE80211_BAND_2GHZ].channels) - kfree(sc->sbands[IEEE80211_BAND_2GHZ].channels); - - if (sc->sbands[IEEE80211_BAND_5GHZ].channels) - kfree(sc->sbands[IEEE80211_BAND_5GHZ].channels); - ath9k_deinit_btcoex(sc); for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) @@ -940,8 +915,6 @@ static void ath9k_deinit_softc(struct ath_softc *sc) sc->dfs_detector->exit(sc->dfs_detector); ath9k_eeprom_release(sc); - kfree(sc->sc_ah); - sc->sc_ah = NULL; } void ath9k_deinit_device(struct ath_softc *sc) @@ -957,22 +930,9 @@ void ath9k_deinit_device(struct ath_softc *sc) ieee80211_unregister_hw(hw); ath_rx_cleanup(sc); - ath_tx_cleanup(sc); ath9k_deinit_softc(sc); } -void ath_descdma_cleanup(struct ath_softc *sc, - struct ath_descdma *dd, - struct list_head *head) -{ - dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc, - dd->dd_desc_paddr); - - INIT_LIST_HEAD(head); - kfree(dd->dd_bufptr); - memset(dd, 0, sizeof(*dd)); -} - /************************/ /* Module Hooks */ /************************/ diff --git a/drivers/net/wireless/ath/ath9k/mci.c b/drivers/net/wireless/ath/ath9k/mci.c index 5c02702f21e7..d2074334ec9b 100644 --- a/drivers/net/wireless/ath/ath9k/mci.c +++ b/drivers/net/wireless/ath/ath9k/mci.c @@ -438,7 +438,7 @@ int ath_mci_setup(struct ath_softc *sc) struct ath_mci_buf *buf = &mci->sched_buf; int ret; - buf->bf_addr = dma_alloc_coherent(sc->dev, + buf->bf_addr = dmam_alloc_coherent(sc->dev, ATH_MCI_SCHED_BUF_SIZE + ATH_MCI_GPM_BUF_SIZE, &buf->bf_paddr, GFP_KERNEL); @@ -477,11 +477,6 @@ void ath_mci_cleanup(struct ath_softc *sc) struct ath_mci_coex *mci = &sc->mci_coex; struct ath_mci_buf *buf = &mci->sched_buf; - if (buf->bf_addr) - dma_free_coherent(sc->dev, - ATH_MCI_SCHED_BUF_SIZE + ATH_MCI_GPM_BUF_SIZE, - buf->bf_addr, buf->bf_paddr); - ar9003_mci_cleanup(ah); ath_dbg(common, MCI, "MCI De-Initialized\n"); diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 7ae73fbd9136..0e0d39583837 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -147,7 +147,6 @@ static const struct ath_bus_ops ath_pci_bus_ops = { static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - void __iomem *mem; struct ath_softc *sc; struct ieee80211_hw *hw; u8 csz; @@ -155,19 +154,19 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) int ret = 0; char hw_name[64]; - if (pci_enable_device(pdev)) + if (pcim_enable_device(pdev)) return -EIO; ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (ret) { pr_err("32-bit DMA not available\n"); - goto err_dma; + return ret; } ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (ret) { pr_err("32-bit DMA consistent DMA enable failed\n"); - goto err_dma; + return ret; } /* @@ -203,25 +202,16 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if ((val & 0x0000ff00) != 0) pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); - ret = pci_request_region(pdev, 0, "ath9k"); + ret = pcim_iomap_regions(pdev, BIT(0), "ath9k"); if (ret) { dev_err(&pdev->dev, "PCI memory region reserve error\n"); - ret = -ENODEV; - goto err_region; - } - - mem = pci_iomap(pdev, 0, 0); - if (!mem) { - pr_err("PCI memory map error\n") ; - ret = -EIO; - goto err_iomap; + return -ENODEV; } hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops); if (!hw) { dev_err(&pdev->dev, "No memory for ieee80211_hw\n"); - ret = -ENOMEM; - goto err_alloc_hw; + return -ENOMEM; } SET_IEEE80211_DEV(hw, &pdev->dev); @@ -230,7 +220,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) sc = hw->priv; sc->hw = hw; sc->dev = &pdev->dev; - sc->mem = mem; + sc->mem = pcim_iomap_table(pdev)[0]; /* Will be cleared in ath9k_start() */ set_bit(SC_OP_INVALID, &sc->sc_flags); @@ -251,7 +241,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name)); wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n", - hw_name, (unsigned long)mem, pdev->irq); + hw_name, (unsigned long)sc->mem, pdev->irq); return 0; @@ -259,14 +249,6 @@ err_init: free_irq(sc->irq, sc); err_irq: ieee80211_free_hw(hw); -err_alloc_hw: - pci_iounmap(pdev, mem); -err_iomap: - pci_release_region(pdev, 0); -err_region: - /* Nothing */ -err_dma: - pci_disable_device(pdev); return ret; } @@ -274,17 +256,12 @@ static void ath_pci_remove(struct pci_dev *pdev) { struct ieee80211_hw *hw = pci_get_drvdata(pdev); struct ath_softc *sc = hw->priv; - void __iomem *mem = sc->mem; if (!is_ath9k_unloaded) sc->sc_ah->ah_flags |= AH_UNPLUGGED; ath9k_deinit_device(sc); free_irq(sc->irq, sc); ieee80211_free_hw(sc->hw); - - pci_iounmap(pdev, mem); - pci_disable_device(pdev); - pci_release_region(pdev, 0); } #ifdef CONFIG_PM_SLEEP diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index d4df98a938bf..3d236aebf588 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -180,11 +180,6 @@ static void ath_rx_edma_cleanup(struct ath_softc *sc) bf->bf_mpdu = NULL; } } - - INIT_LIST_HEAD(&sc->rx.rxbuf); - - kfree(sc->rx.rx_bufptr); - sc->rx.rx_bufptr = NULL; } static void ath_rx_edma_init_queue(struct ath_rx_edma *rx_edma, int size) @@ -211,12 +206,11 @@ static int ath_rx_edma_init(struct ath_softc *sc, int nbufs) ah->caps.rx_hp_qdepth); size = sizeof(struct ath_buf) * nbufs; - bf = kzalloc(size, GFP_KERNEL); + bf = devm_kzalloc(sc->dev, size, GFP_KERNEL); if (!bf) return -ENOMEM; INIT_LIST_HEAD(&sc->rx.rxbuf); - sc->rx.rx_bufptr = bf; for (i = 0; i < nbufs; i++, bf++) { skb = ath_rxbuf_alloc(common, common->rx_bufsize, GFP_KERNEL); @@ -363,9 +357,6 @@ void ath_rx_cleanup(struct ath_softc *sc) bf->bf_mpdu = NULL; } } - - if (sc->rx.rxdma.dd_desc_len != 0) - ath_descdma_cleanup(sc, &sc->rx.rxdma, &sc->rx.rxbuf); } } diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 90e48a0fafe5..ca4a0341294f 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2361,8 +2361,8 @@ static int ath_txstatus_setup(struct ath_softc *sc, int size) u8 txs_len = sc->sc_ah->caps.txs_len; dd->dd_desc_len = size * txs_len; - dd->dd_desc = dma_alloc_coherent(sc->dev, dd->dd_desc_len, - &dd->dd_desc_paddr, GFP_KERNEL); + dd->dd_desc = dmam_alloc_coherent(sc->dev, dd->dd_desc_len, + &dd->dd_desc_paddr, GFP_KERNEL); if (!dd->dd_desc) return -ENOMEM; @@ -2382,14 +2382,6 @@ static int ath_tx_edma_init(struct ath_softc *sc) return err; } -static void ath_tx_edma_cleanup(struct ath_softc *sc) -{ - struct ath_descdma *dd = &sc->txsdma; - - dma_free_coherent(sc->dev, dd->dd_desc_len, dd->dd_desc, - dd->dd_desc_paddr); -} - int ath_tx_init(struct ath_softc *sc, int nbufs) { struct ath_common *common = ath9k_hw_common(sc->sc_ah); @@ -2402,7 +2394,7 @@ int ath_tx_init(struct ath_softc *sc, int nbufs) if (error != 0) { ath_err(common, "Failed to allocate tx descriptors: %d\n", error); - goto err; + return error; } error = ath_descdma_setup(sc, &sc->beacon.bdma, &sc->beacon.bbuf, @@ -2410,36 +2402,17 @@ int ath_tx_init(struct ath_softc *sc, int nbufs) if (error != 0) { ath_err(common, "Failed to allocate beacon descriptors: %d\n", error); - goto err; + return error; } INIT_DELAYED_WORK(&sc->tx_complete_work, ath_tx_complete_poll_work); - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) { + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) error = ath_tx_edma_init(sc); - if (error) - goto err; - } - -err: - if (error != 0) - ath_tx_cleanup(sc); return error; } -void ath_tx_cleanup(struct ath_softc *sc) -{ - if (sc->beacon.bdma.dd_desc_len != 0) - ath_descdma_cleanup(sc, &sc->beacon.bdma, &sc->beacon.bbuf); - - if (sc->tx.txdma.dd_desc_len != 0) - ath_descdma_cleanup(sc, &sc->tx.txdma, &sc->tx.txbuf); - - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - ath_tx_edma_cleanup(sc); -} - void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an) { struct ath_atx_tid *tid; -- cgit v1.2.3 From c1b976d2fcb3b308906be7c6bda1390251dec32d Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 12 Dec 2012 13:14:23 +0100 Subject: ath9k_hw: use the devres API for allocations Signed-off-by: Felix Fietkau Acked-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 50 +++++++++-------------------- drivers/net/wireless/ath/ath9k/ar9002_hw.c | 11 +++++-- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 -- drivers/net/wireless/ath/ath9k/hw-ops.h | 16 --------- drivers/net/wireless/ath/ath9k/hw.c | 28 ++++++---------- drivers/net/wireless/ath/ath9k/hw.h | 9 ++---- drivers/net/wireless/ath/ath9k/init.c | 1 + 7 files changed, 37 insertions(+), 80 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index 874186bfda41..fd69376ecc83 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -470,16 +470,15 @@ static void ar5008_hw_spur_mitigate(struct ath_hw *ah, static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah) { #define ATH_ALLOC_BANK(bank, size) do { \ - bank = kzalloc((sizeof(u32) * size), GFP_KERNEL); \ - if (!bank) { \ - ath_err(common, "Cannot allocate RF banks\n"); \ - return -ENOMEM; \ - } \ + bank = devm_kzalloc(ah->dev, sizeof(u32) * size, GFP_KERNEL); \ + if (!bank) \ + goto error; \ } while (0); struct ath_common *common = ath9k_hw_common(ah); - BUG_ON(AR_SREV_9280_20_OR_LATER(ah)); + if (AR_SREV_9280_20_OR_LATER(ah)) + return 0; ATH_ALLOC_BANK(ah->analogBank0Data, ah->iniBank0.ia_rows); ATH_ALLOC_BANK(ah->analogBank1Data, ah->iniBank1.ia_rows); @@ -492,35 +491,12 @@ static int ar5008_hw_rf_alloc_ext_banks(struct ath_hw *ah) return 0; #undef ATH_ALLOC_BANK +error: + ath_err(common, "Cannot allocate RF banks\n"); + return -ENOMEM; } -/** - * ar5008_hw_rf_free_ext_banks - Free memory for analog bank scratch buffers - * @ah: atheros hardware struture - * For the external AR2133/AR5133 radios banks. - */ -static void ar5008_hw_rf_free_ext_banks(struct ath_hw *ah) -{ -#define ATH_FREE_BANK(bank) do { \ - kfree(bank); \ - bank = NULL; \ - } while (0); - - BUG_ON(AR_SREV_9280_20_OR_LATER(ah)); - - ATH_FREE_BANK(ah->analogBank0Data); - ATH_FREE_BANK(ah->analogBank1Data); - ATH_FREE_BANK(ah->analogBank2Data); - ATH_FREE_BANK(ah->analogBank3Data); - ATH_FREE_BANK(ah->analogBank6Data); - ATH_FREE_BANK(ah->analogBank6TPCData); - ATH_FREE_BANK(ah->analogBank7Data); - ATH_FREE_BANK(ah->bank6Temp); - -#undef ATH_FREE_BANK -} - /* * * ar5008_hw_set_rf_regs - programs rf registers based on EEPROM * @ah: atheros hardware structure @@ -1380,7 +1356,7 @@ static void ar5008_hw_set_radar_conf(struct ath_hw *ah) conf->radar_inband = 8; } -void ar5008_hw_attach_phy_ops(struct ath_hw *ah) +int ar5008_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); static const u32 ar5416_cca_regs[6] = { @@ -1391,12 +1367,15 @@ void ar5008_hw_attach_phy_ops(struct ath_hw *ah) AR_PHY_CH1_EXT_CCA, AR_PHY_CH2_EXT_CCA }; + int ret; + + ret = ar5008_hw_rf_alloc_ext_banks(ah); + if (ret) + return ret; priv_ops->rf_set_freq = ar5008_hw_set_channel; priv_ops->spur_mitigate_freq = ar5008_hw_spur_mitigate; - priv_ops->rf_alloc_ext_banks = ar5008_hw_rf_alloc_ext_banks; - priv_ops->rf_free_ext_banks = ar5008_hw_rf_free_ext_banks; priv_ops->set_rf_regs = ar5008_hw_set_rf_regs; priv_ops->set_channel_regs = ar5008_hw_set_channel_regs; priv_ops->init_bb = ar5008_hw_init_bb; @@ -1421,4 +1400,5 @@ void ar5008_hw_attach_phy_ops(struct ath_hw *ah) ar5008_hw_set_nf_limits(ah); ar5008_hw_set_radar_conf(ah); memcpy(ah->nf_regs, ar5416_cca_regs, sizeof(ah->nf_regs)); + return 0; } diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index 648da3e885e9..54da026f058c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -102,7 +102,7 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah) u32 size = sizeof(u32) * addac->ia_rows * addac->ia_columns; u32 *data; - data = kmalloc(size, GFP_KERNEL); + data = devm_kzalloc(ah->dev, size, GFP_KERNEL); if (!data) return; @@ -409,22 +409,27 @@ void ar9002_hw_enable_async_fifo(struct ath_hw *ah) } /* Sets up the AR5008/AR9001/AR9002 hardware familiy callbacks */ -void ar9002_hw_attach_ops(struct ath_hw *ah) +int ar9002_hw_attach_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); struct ath_hw_ops *ops = ath9k_hw_ops(ah); + int ret; priv_ops->init_mode_regs = ar9002_hw_init_mode_regs; priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs; ops->config_pci_powersave = ar9002_hw_configpcipowersave; - ar5008_hw_attach_phy_ops(ah); + ret = ar5008_hw_attach_phy_ops(ah); + if (ret) + return ret; + if (AR_SREV_9280_20_OR_LATER(ah)) ar9002_hw_attach_phy_ops(ah); ar9002_hw_attach_calib_ops(ah); ar9002_hw_attach_mac_ops(ah); + return 0; } void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 846dd7974eb8..8b119811b2d9 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -561,8 +561,6 @@ void ar9002_hw_attach_phy_ops(struct ath_hw *ah) struct ath_hw_ops *ops = ath9k_hw_ops(ah); priv_ops->set_rf_regs = NULL; - priv_ops->rf_alloc_ext_banks = NULL; - priv_ops->rf_free_ext_banks = NULL; priv_ops->rf_set_freq = ar9002_hw_set_channel; priv_ops->spur_mitigate_freq = ar9002_hw_spur_mitigate; priv_ops->olc_init = ar9002_olc_init; diff --git a/drivers/net/wireless/ath/ath9k/hw-ops.h b/drivers/net/wireless/ath/ath9k/hw-ops.h index 0f2b97f6b739..14b701140b49 100644 --- a/drivers/net/wireless/ath/ath9k/hw-ops.h +++ b/drivers/net/wireless/ath/ath9k/hw-ops.h @@ -101,22 +101,6 @@ static inline void ath9k_hw_spur_mitigate_freq(struct ath_hw *ah, ath9k_hw_private_ops(ah)->spur_mitigate_freq(ah, chan); } -static inline int ath9k_hw_rf_alloc_ext_banks(struct ath_hw *ah) -{ - if (!ath9k_hw_private_ops(ah)->rf_alloc_ext_banks) - return 0; - - return ath9k_hw_private_ops(ah)->rf_alloc_ext_banks(ah); -} - -static inline void ath9k_hw_rf_free_ext_banks(struct ath_hw *ah) -{ - if (!ath9k_hw_private_ops(ah)->rf_free_ext_banks) - return; - - ath9k_hw_private_ops(ah)->rf_free_ext_banks(ah); -} - static inline bool ath9k_hw_set_rf_regs(struct ath_hw *ah, struct ath9k_channel *chan, u16 modesIndex) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 7cb787065913..ecf1c08a03c1 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -554,14 +554,6 @@ static int ath9k_hw_post_init(struct ath_hw *ah) ah->eep_ops->get_eeprom_ver(ah), ah->eep_ops->get_eeprom_rev(ah)); - ecode = ath9k_hw_rf_alloc_ext_banks(ah); - if (ecode) { - ath_err(ath9k_hw_common(ah), - "Failed allocating banks for external radio\n"); - ath9k_hw_rf_free_ext_banks(ah); - return ecode; - } - if (ah->config.enable_ani) { ath9k_hw_ani_setup(ah); ath9k_hw_ani_init(ah); @@ -570,12 +562,13 @@ static int ath9k_hw_post_init(struct ath_hw *ah) return 0; } -static void ath9k_hw_attach_ops(struct ath_hw *ah) +static int ath9k_hw_attach_ops(struct ath_hw *ah) { - if (AR_SREV_9300_20_OR_LATER(ah)) - ar9003_hw_attach_ops(ah); - else - ar9002_hw_attach_ops(ah); + if (!AR_SREV_9300_20_OR_LATER(ah)) + return ar9002_hw_attach_ops(ah); + + ar9003_hw_attach_ops(ah); + return 0; } /* Called for all hardware families */ @@ -611,7 +604,9 @@ static int __ath9k_hw_init(struct ath_hw *ah) ath9k_hw_init_defaults(ah); ath9k_hw_init_config(ah); - ath9k_hw_attach_ops(ah); + r = ath9k_hw_attach_ops(ah); + if (r) + return r; if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) { ath_err(common, "Couldn't wakeup chip\n"); @@ -1153,12 +1148,9 @@ void ath9k_hw_deinit(struct ath_hw *ah) struct ath_common *common = ath9k_hw_common(ah); if (common->state < ATH_HW_INITIALIZED) - goto free_hw; + return; ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP); - -free_hw: - ath9k_hw_rf_free_ext_banks(ah); } EXPORT_SYMBOL(ath9k_hw_deinit); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 7f1a8e91c908..d2b5229474b6 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -604,8 +604,6 @@ struct ath_hw_radar_conf { * * @rf_set_freq: change frequency * @spur_mitigate_freq: spur mitigation - * @rf_alloc_ext_banks: - * @rf_free_ext_banks: * @set_rf_regs: * @compute_pll_control: compute the PLL control value to use for * AR_RTC_PLL_CONTROL for a given channel @@ -630,8 +628,6 @@ struct ath_hw_private_ops { struct ath9k_channel *chan); void (*spur_mitigate_freq)(struct ath_hw *ah, struct ath9k_channel *chan); - int (*rf_alloc_ext_banks)(struct ath_hw *ah); - void (*rf_free_ext_banks)(struct ath_hw *ah); bool (*set_rf_regs)(struct ath_hw *ah, struct ath9k_channel *chan, u16 modesIndex); @@ -710,6 +706,7 @@ enum ath_cal_list { struct ath_hw { struct ath_ops reg_ops; + struct device *dev; struct ieee80211_hw *hw; struct ath_common common; struct ath9k_hw_version hw_version; @@ -1068,14 +1065,14 @@ bool ar9003_paprd_is_done(struct ath_hw *ah); bool ar9003_is_paprd_enabled(struct ath_hw *ah); /* Hardware family op attach helpers */ -void ar5008_hw_attach_phy_ops(struct ath_hw *ah); +int ar5008_hw_attach_phy_ops(struct ath_hw *ah); void ar9002_hw_attach_phy_ops(struct ath_hw *ah); void ar9003_hw_attach_phy_ops(struct ath_hw *ah); void ar9002_hw_attach_calib_ops(struct ath_hw *ah); void ar9003_hw_attach_calib_ops(struct ath_hw *ah); -void ar9002_hw_attach_ops(struct ath_hw *ah); +int ar9002_hw_attach_ops(struct ath_hw *ah); void ar9003_hw_attach_ops(struct ath_hw *ah); void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan); diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 0f00a1306ac0..5c01f43c32b0 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -559,6 +559,7 @@ static int ath9k_init_softc(u16 devid, struct ath_softc *sc, if (!ah) return -ENOMEM; + ah->dev = sc->dev; ah->hw = sc->hw; ah->hw_version.devid = devid; ah->reg_ops.read = ath9k_ioread32; -- cgit v1.2.3 From d1f3de71a584a82ee4e84505fce9acccf40215ff Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 15 Dec 2012 23:18:06 +0100 Subject: carl9170: advertise support for TDLS Based on a quick test [ath9k and carl9170], TDLS seemed to be working fine. And while we are at it, let's move the wiphy feature flag set from carl9170_alloc into a single place in carl9170_fw. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/fw.c | 6 +++++- drivers/net/wireless/ath/carl9170/main.c | 4 ---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c index aaebecd19e59..5a8a9f891dd8 100644 --- a/drivers/net/wireless/ath/carl9170/fw.c +++ b/drivers/net/wireless/ath/carl9170/fw.c @@ -354,7 +354,11 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) ar->hw->wiphy->interface_modes |= if_comb_types; - ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; + ar->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + /* As IBSS Encryption is software-based, IBSS RSN is supported. */ + ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL | + WIPHY_FLAG_IBSS_RSN | WIPHY_FLAG_SUPPORTS_TDLS; #undef SUPPORTED return carl9170_fw_tx_sequence(ar); diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 9d2051aeb782..ce8ae1e6bd3b 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1807,10 +1807,6 @@ void *carl9170_alloc(size_t priv_size) for (i = 0; i < ARRAY_SIZE(ar->noise); i++) ar->noise[i] = -95; /* ATH_DEFAULT_NOISE_FLOOR */ - hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - - /* As IBSS Encryption is software-based, IBSS RSN is supported. */ - hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; return ar; err_nomem: -- cgit v1.2.3 From 5ae994d0984ddc2f1e79c4f8de7189faecfc0af9 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 15 Dec 2012 23:21:32 +0100 Subject: carl9170: import 1.9.7 firmware headers Import new headers from my firmware branch: visit our wiki at: Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/fwcmd.h | 8 ++++++++ drivers/net/wireless/ath/carl9170/hw.h | 2 +- drivers/net/wireless/ath/carl9170/version.h | 6 +++--- 3 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/carl9170/fwcmd.h b/drivers/net/wireless/ath/carl9170/fwcmd.h index 9443c802b25b..9111d4ffc1b3 100644 --- a/drivers/net/wireless/ath/carl9170/fwcmd.h +++ b/drivers/net/wireless/ath/carl9170/fwcmd.h @@ -156,6 +156,14 @@ struct carl9170_psm { } __packed; #define CARL9170_PSM_SIZE 4 +/* + * Note: If a bit in rx_filter is set, then it + * means that the particular frames which matches + * the condition are FILTERED/REMOVED/DISCARDED! + * (This is can be a bit confusing, especially + * because someone people think it's the exact + * opposite way, so watch out!) + */ struct carl9170_rx_filter_cmd { __le32 rx_filter; } __packed; diff --git a/drivers/net/wireless/ath/carl9170/hw.h b/drivers/net/wireless/ath/carl9170/hw.h index fa834c1460f0..0db874abde50 100644 --- a/drivers/net/wireless/ath/carl9170/hw.h +++ b/drivers/net/wireless/ath/carl9170/hw.h @@ -384,7 +384,7 @@ #define AR9170_MAC_REG_BCN_ADDR (AR9170_MAC_REG_BASE + 0xd84) #define AR9170_MAC_REG_BCN_LENGTH (AR9170_MAC_REG_BASE + 0xd88) -#define AR9170_MAC_BCN_LENGTH_MAX 256 +#define AR9170_MAC_BCN_LENGTH_MAX (512 - 32) #define AR9170_MAC_REG_BCN_STATUS (AR9170_MAC_REG_BASE + 0xd8c) diff --git a/drivers/net/wireless/ath/carl9170/version.h b/drivers/net/wireless/ath/carl9170/version.h index 2ec3e9191e4d..2282847d4bb8 100644 --- a/drivers/net/wireless/ath/carl9170/version.h +++ b/drivers/net/wireless/ath/carl9170/version.h @@ -1,7 +1,7 @@ #ifndef __CARL9170_SHARED_VERSION_H #define __CARL9170_SHARED_VERSION_H #define CARL9170FW_VERSION_YEAR 12 -#define CARL9170FW_VERSION_MONTH 7 -#define CARL9170FW_VERSION_DAY 7 -#define CARL9170FW_VERSION_GIT "1.9.6" +#define CARL9170FW_VERSION_MONTH 12 +#define CARL9170FW_VERSION_DAY 15 +#define CARL9170FW_VERSION_GIT "1.9.7" #endif /* __CARL9170_SHARED_VERSION_H */ -- cgit v1.2.3 From 7f878b0d96e6b3bd27d736fb2fb7e3cc94b16b26 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sun, 16 Dec 2012 01:41:37 +0100 Subject: carl9170: allow P2P_GO interface creation after P2P_CLIENT Janusz Dziedzic reported that after a change in wpa_supplicant ["nl80211: Automatically use concurrent P2P if possible"], carl9170 was no longer able to host a P2P network. This patch tackles the problem by allowing GO interfaces to be registered, long after the P2P_CLIENT interface is brought up. Reported-by: Janusz Dziedzic Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/main.c | 54 ++++++++++++++++++++++++++++++-- 1 file changed, 51 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index ce8ae1e6bd3b..95e4bf05e559 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -580,7 +580,7 @@ static int carl9170_op_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct carl9170_vif_info *vif_priv = (void *) vif->drv_priv; - struct ieee80211_vif *main_vif; + struct ieee80211_vif *main_vif, *old_main = NULL; struct ar9170 *ar = hw->priv; int vif_id = -1, err = 0; @@ -602,6 +602,15 @@ static int carl9170_op_add_interface(struct ieee80211_hw *hw, goto init; } + /* Because the AR9170 HW's MAC doesn't provide full support for + * multiple, independent interfaces [of different operation modes]. + * We have to select ONE main interface [main mode of HW], but we + * can have multiple slaves [AKA: entry in the ACK-table]. + * + * The first (from HEAD/TOP) interface in the ar->vif_list is + * always the main intf. All following intfs in this list + * are considered to be slave intfs. + */ main_vif = carl9170_get_main_vif(ar); if (main_vif) { @@ -610,6 +619,18 @@ static int carl9170_op_add_interface(struct ieee80211_hw *hw, if (vif->type == NL80211_IFTYPE_STATION) break; + /* P2P GO [master] use-case + * Because the P2P GO station is selected dynamically + * by all participating peers of a WIFI Direct network, + * the driver has be able to change the main interface + * operating mode on the fly. + */ + if (main_vif->p2p && vif->p2p && + vif->type == NL80211_IFTYPE_AP) { + old_main = main_vif; + break; + } + err = -EBUSY; rcu_read_unlock(); @@ -648,14 +669,41 @@ static int carl9170_op_add_interface(struct ieee80211_hw *hw, vif_priv->id = vif_id; vif_priv->enable_beacon = false; ar->vifs++; - list_add_tail_rcu(&vif_priv->list, &ar->vif_list); + if (old_main) { + /* We end up in here, if the main interface is being replaced. + * Put the new main interface at the HEAD of the list and the + * previous inteface will automatically become second in line. + */ + list_add_rcu(&vif_priv->list, &ar->vif_list); + } else { + /* Add new inteface. If the list is empty, it will become the + * main inteface, otherwise it will be slave. + */ + list_add_tail_rcu(&vif_priv->list, &ar->vif_list); + } rcu_assign_pointer(ar->vif_priv[vif_id].vif, vif); init: - if (carl9170_get_main_vif(ar) == vif) { + main_vif = carl9170_get_main_vif(ar); + + if (main_vif == vif) { rcu_assign_pointer(ar->beacon_iter, vif_priv); rcu_read_unlock(); + if (old_main) { + struct carl9170_vif_info *old_main_priv = + (void *) old_main->drv_priv; + /* downgrade old main intf to slave intf. + * NOTE: We are no longer under rcu_read_lock. + * But we are still holding ar->mutex, so the + * vif data [id, addr] is safe. + */ + err = carl9170_mod_virtual_mac(ar, old_main_priv->id, + old_main->addr); + if (err) + goto unlock; + } + err = carl9170_init_interface(ar, vif); if (err) goto unlock; -- cgit v1.2.3 From 17f658ac8c7e0af0c7aa12587477f9bbc093229e Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 17 Dec 2012 14:54:19 +0100 Subject: carl9170: Only specify interface combinations if more than one interface is possible Otherwise carl9170 triggers a warning in cfg80211, from net/wireless/core.c /* Combinations with just one interface aren't real */ if (WARN_ON(c->max_interfaces < 2)) Note: The number of supported interfaces is set by the carl9170 firmware. The default number of supported interfaces for all current firmwares is 2. Therefore this warning can only be observed with custom firmwares. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/fw.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c index 5a8a9f891dd8..401a080a30f1 100644 --- a/drivers/net/wireless/ath/carl9170/fw.c +++ b/drivers/net/wireless/ath/carl9170/fw.c @@ -215,6 +215,24 @@ static int carl9170_fw_tx_sequence(struct ar9170 *ar) return 0; } +static void carl9170_fw_set_if_combinations(struct ar9170 *ar, + u16 if_comb_types) +{ + if (ar->fw.vif_num < 2) + return; + + ar->if_comb_limits[0].max = ar->fw.vif_num; + ar->if_comb_limits[0].types = if_comb_types; + + ar->if_combs[0].num_different_channels = 1; + ar->if_combs[0].max_interfaces = ar->fw.vif_num; + ar->if_combs[0].limits = ar->if_comb_limits; + ar->if_combs[0].n_limits = ARRAY_SIZE(ar->if_comb_limits); + + ar->hw->wiphy->iface_combinations = ar->if_combs; + ar->hw->wiphy->n_iface_combinations = ARRAY_SIZE(ar->if_combs); +} + static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) { const struct carl9170fw_otus_desc *otus_desc; @@ -341,16 +359,7 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) } } - ar->if_comb_limits[0].max = ar->fw.vif_num; - ar->if_comb_limits[0].types = if_comb_types; - - ar->if_combs[0].num_different_channels = 1; - ar->if_combs[0].max_interfaces = ar->fw.vif_num; - ar->if_combs[0].limits = ar->if_comb_limits; - ar->if_combs[0].n_limits = ARRAY_SIZE(ar->if_comb_limits); - - ar->hw->wiphy->iface_combinations = ar->if_combs; - ar->hw->wiphy->n_iface_combinations = ARRAY_SIZE(ar->if_combs); + carl9170_fw_set_if_combinations(ar, if_comb_types); ar->hw->wiphy->interface_modes |= if_comb_types; -- cgit v1.2.3 From 7a5c7307736cdc26146581aed24cc46a4c7e6f35 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 17 Dec 2012 16:30:05 +0100 Subject: carl9170: don't enable hw crypto offload, if the fw doesn't support it Previously, op_start would set disable_offload always to false, even if it was set to true by the fw parser. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/carl9170.h | 1 + drivers/net/wireless/ath/carl9170/fw.c | 2 +- drivers/net/wireless/ath/carl9170/main.c | 33 ++++++++++++++++++---------- 3 files changed, 24 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h index 2df17f1e49ef..c77874c4f4ca 100644 --- a/drivers/net/wireless/ath/carl9170/carl9170.h +++ b/drivers/net/wireless/ath/carl9170/carl9170.h @@ -290,6 +290,7 @@ struct ar9170 { unsigned int rx_size; unsigned int tx_seq_table; bool ba_filter; + bool disable_offload_fw; } fw; /* interface configuration combinations */ diff --git a/drivers/net/wireless/ath/carl9170/fw.c b/drivers/net/wireless/ath/carl9170/fw.c index 401a080a30f1..6e76179f1a79 100644 --- a/drivers/net/wireless/ath/carl9170/fw.c +++ b/drivers/net/wireless/ath/carl9170/fw.c @@ -282,7 +282,7 @@ static int carl9170_fw(struct ar9170 *ar, const __u8 *data, size_t len) if (!SUPP(CARL9170FW_COMMAND_CAM)) { dev_info(&ar->udev->dev, "crypto offloading is disabled " "by firmware.\n"); - ar->disable_offload = true; + ar->fw.disable_offload_fw = true; } if (SUPP(CARL9170FW_PSM) && SUPP(CARL9170FW_FIXED_5GHZ_PSM)) diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 95e4bf05e559..6ca5dd068275 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -358,8 +358,13 @@ static int carl9170_op_start(struct ieee80211_hw *hw) ar->ps.last_action = jiffies; ar->ps.last_slept = jiffies; ar->erp_mode = CARL9170_ERP_AUTO; - ar->rx_software_decryption = false; - ar->disable_offload = false; + + /* Set "disable hw crypto offload" whenever the module parameter + * nohwcrypt is true or if the firmware does not support it. + */ + ar->disable_offload = modparam_nohwcrypt | + ar->fw.disable_offload_fw; + ar->rx_software_decryption = ar->disable_offload; for (i = 0; i < ar->hw->queues; i++) { ar->queue_stop_timeout[i] = jiffies; @@ -565,12 +570,20 @@ static int carl9170_init_interface(struct ar9170 *ar, memcpy(common->macaddr, vif->addr, ETH_ALEN); - if (modparam_nohwcrypt || - ((vif->type != NL80211_IFTYPE_STATION) && - (vif->type != NL80211_IFTYPE_AP))) { - ar->rx_software_decryption = true; - ar->disable_offload = true; - } + /* We have to fall back to software crypto, whenever + * the user choose to participates in an IBSS. HW + * offload for IBSS RSN is not supported by this driver. + * + * NOTE: If the previous main interface has already + * disabled hw crypto offload, we have to keep this + * previous disable_offload setting as it was. + * Altough ideally, we should notify mac80211 and tell + * it to forget about any HW crypto offload for now. + */ + ar->disable_offload |= ((vif->type != NL80211_IFTYPE_STATION) && + (vif->type != NL80211_IFTYPE_AP)); + + ar->rx_software_decryption = ar->disable_offload; err = carl9170_set_operating_mode(ar); return err; @@ -1160,9 +1173,7 @@ static int carl9170_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, if (ar->disable_offload || !vif) return -EOPNOTSUPP; - /* - * We have to fall back to software encryption, whenever - * the user choose to participates in an IBSS or is connected + /* Fall back to software encryption whenever the driver is connected * to more than one network. * * This is very unfortunate, because some machines cannot handle -- cgit v1.2.3 From 55fa645e3a3f4c0b5da744eb0e1fec4e51dfc75e Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 17 Dec 2012 17:05:55 +0100 Subject: carl9170: disable hw crypto for p2p networks While the driver supports HW offload in a single P2P client configuration, it doesn't support HW offload in the concurrent P2P GO+CLIENT configuration. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/main.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 6ca5dd068275..0abf005aaa4e 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -583,6 +583,14 @@ static int carl9170_init_interface(struct ar9170 *ar, ar->disable_offload |= ((vif->type != NL80211_IFTYPE_STATION) && (vif->type != NL80211_IFTYPE_AP)); + /* While the driver supports HW offload in a single + * P2P client configuration, it doesn't support HW + * offload in the favourit, concurrent P2P GO+CLIENT + * configuration. Hence, HW offload will always be + * disabled for P2P. + */ + ar->disable_offload |= vif->p2p; + ar->rx_software_decryption = ar->disable_offload; err = carl9170_set_operating_mode(ar); -- cgit v1.2.3 From 558925f3135731d67c5e65436ecff1a4b1c9450f Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Thu, 20 Dec 2012 02:44:29 +0100 Subject: carl9170: remove custom NUM_TID and friends The commit: "mac80211: introduce IEEE80211_NUM_TIDS and use it" introduced a generic NUM_TID definitions for all everyone. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/carl9170.h | 18 ++++++------------ drivers/net/wireless/ath/carl9170/main.c | 4 ++-- 2 files changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h index c77874c4f4ca..25599741cd8a 100644 --- a/drivers/net/wireless/ath/carl9170/carl9170.h +++ b/drivers/net/wireless/ath/carl9170/carl9170.h @@ -85,20 +85,14 @@ enum carl9170_device_state { CARL9170_STARTED, }; -#define CARL9170_NUM_TID 16 #define WME_BA_BMP_SIZE 64 #define CARL9170_TX_USER_RATE_TRIES 3 -#define WME_AC_BE 2 -#define WME_AC_BK 3 -#define WME_AC_VI 1 -#define WME_AC_VO 0 - #define TID_TO_WME_AC(_tid) \ - ((((_tid) == 0) || ((_tid) == 3)) ? WME_AC_BE : \ - (((_tid) == 1) || ((_tid) == 2)) ? WME_AC_BK : \ - (((_tid) == 4) || ((_tid) == 5)) ? WME_AC_VI : \ - WME_AC_VO) + ((((_tid) == 0) || ((_tid) == 3)) ? IEEE80211_AC_BE : \ + (((_tid) == 1) || ((_tid) == 2)) ? IEEE80211_AC_BK : \ + (((_tid) == 4) || ((_tid) == 5)) ? IEEE80211_AC_VI : \ + IEEE80211_AC_VO) #define SEQ_DIFF(_start, _seq) \ (((_start) - (_seq)) & 0x0fff) @@ -494,8 +488,8 @@ struct carl9170_sta_info { bool sleeping; atomic_t pending_frames; unsigned int ampdu_max_len; - struct carl9170_sta_tid __rcu *agg[CARL9170_NUM_TID]; - struct carl9170_ba_stats stats[CARL9170_NUM_TID]; + struct carl9170_sta_tid __rcu *agg[IEEE80211_NUM_TIDS]; + struct carl9170_ba_stats stats[IEEE80211_NUM_TIDS]; }; struct carl9170_tx_info { diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 0abf005aaa4e..f22da264fd93 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1330,7 +1330,7 @@ static int carl9170_op_sta_add(struct ieee80211_hw *hw, return 0; } - for (i = 0; i < CARL9170_NUM_TID; i++) + for (i = 0; i < ARRAY_SIZE(sta_info->agg); i++) RCU_INIT_POINTER(sta_info->agg[i], NULL); sta_info->ampdu_max_len = 1 << (3 + sta->ht_cap.ampdu_factor); @@ -1354,7 +1354,7 @@ static int carl9170_op_sta_remove(struct ieee80211_hw *hw, sta_info->ht_sta = false; rcu_read_lock(); - for (i = 0; i < CARL9170_NUM_TID; i++) { + for (i = 0; i < ARRAY_SIZE(sta_info->agg); i++) { struct carl9170_sta_tid *tid_info; tid_info = rcu_dereference(sta_info->agg[i]); -- cgit v1.2.3 From 1f1d9654e183c31df4d168591165beed869ea098 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Sat, 22 Dec 2012 15:05:26 +0100 Subject: carl9170: refactor carl9170_update_beacon This patch moves parts of carl9170_update_beacon into separate subroutines, so the parts become more manageable. Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/ath/carl9170/tx.c | 133 ++++++++++++++++++++------------- 1 file changed, 80 insertions(+), 53 deletions(-) diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index ef4ec0da6e49..9c0b150d5b8e 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -1520,35 +1520,92 @@ void carl9170_tx_scheduler(struct ar9170 *ar) carl9170_tx(ar); } -int carl9170_update_beacon(struct ar9170 *ar, const bool submit) +/* caller has to take rcu_read_lock */ +static struct carl9170_vif_info *carl9170_pick_beaconing_vif(struct ar9170 *ar) { - struct sk_buff *skb = NULL; struct carl9170_vif_info *cvif; + int i = 1; + + /* The AR9170 hardware has no fancy beacon queue or some + * other scheduling mechanism. So, the driver has to make + * due by setting the two beacon timers (pretbtt and tbtt) + * once and then swapping the beacon address in the HW's + * register file each time the pretbtt fires. + */ + + cvif = rcu_dereference(ar->beacon_iter); + if (ar->vifs > 0 && cvif) { + do { + list_for_each_entry_continue_rcu(cvif, &ar->vif_list, + list) { + if (cvif->active && cvif->enable_beacon) + goto out; + } + } while (ar->beacon_enabled && i--); + } + +out: + rcu_assign_pointer(ar->beacon_iter, cvif); + return cvif; +} + +static bool carl9170_tx_beacon_physet(struct ar9170 *ar, struct sk_buff *skb, + u32 *ht1, u32 *plcp) +{ struct ieee80211_tx_info *txinfo; struct ieee80211_tx_rate *rate; - __le32 *data, *old = NULL; - unsigned int plcp, power, chains; - u32 word, ht1, off, addr, len; - int i = 0, err = 0; + unsigned int power, chains; + bool ht_rate; - rcu_read_lock(); - cvif = rcu_dereference(ar->beacon_iter); -retry: - if (ar->vifs == 0 || !cvif) - goto out_unlock; + txinfo = IEEE80211_SKB_CB(skb); + rate = &txinfo->control.rates[0]; + ht_rate = !!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS); + carl9170_tx_rate_tpc_chains(ar, txinfo, rate, plcp, &power, &chains); - list_for_each_entry_continue_rcu(cvif, &ar->vif_list, list) { - if (cvif->active && cvif->enable_beacon) - goto found; + *ht1 = AR9170_MAC_BCN_HT1_TX_ANT0; + if (chains == AR9170_TX_PHY_TXCHAIN_2) + *ht1 |= AR9170_MAC_BCN_HT1_TX_ANT1; + SET_VAL(AR9170_MAC_BCN_HT1_PWR_CTRL, *ht1, 7); + SET_VAL(AR9170_MAC_BCN_HT1_TPC, *ht1, power); + SET_VAL(AR9170_MAC_BCN_HT1_CHAIN_MASK, *ht1, chains); + + if (ht_rate) { + *ht1 |= AR9170_MAC_BCN_HT1_HT_EN; + if (rate->flags & IEEE80211_TX_RC_SHORT_GI) + *plcp |= AR9170_MAC_BCN_HT2_SGI; + + if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { + *ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_SHARED; + *plcp |= AR9170_MAC_BCN_HT2_BW40; + } else if (rate->flags & IEEE80211_TX_RC_DUP_DATA) { + *ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_DUP; + *plcp |= AR9170_MAC_BCN_HT2_BW40; + } + + SET_VAL(AR9170_MAC_BCN_HT2_LEN, *plcp, skb->len + FCS_LEN); + } else { + if (*plcp <= AR9170_TX_PHY_RATE_CCK_11M) + *plcp |= ((skb->len + FCS_LEN) << (3 + 16)) + 0x0400; + else + *plcp |= ((skb->len + FCS_LEN) << 16) + 0x0010; } - if (!ar->beacon_enabled || i++) - goto out_unlock; + return ht_rate; +} - goto retry; +int carl9170_update_beacon(struct ar9170 *ar, const bool submit) +{ + struct sk_buff *skb = NULL; + struct carl9170_vif_info *cvif; + __le32 *data, *old = NULL; + u32 word, ht1, plcp, off, addr, len; + int i = 0, err = 0; + bool ht_rate; -found: - rcu_assign_pointer(ar->beacon_iter, cvif); + rcu_read_lock(); + cvif = carl9170_pick_beaconing_vif(ar); + if (!cvif) + goto out_unlock; skb = ieee80211_beacon_get_tim(ar->hw, carl9170_get_vif(cvif), NULL, NULL); @@ -1558,7 +1615,6 @@ found: goto err_free; } - txinfo = IEEE80211_SKB_CB(skb); spin_lock_bh(&ar->beacon_lock); data = (__le32 *)skb->data; if (cvif->beacon) @@ -1588,43 +1644,14 @@ found: goto err_unlock; } - ht1 = AR9170_MAC_BCN_HT1_TX_ANT0; - rate = &txinfo->control.rates[0]; - carl9170_tx_rate_tpc_chains(ar, txinfo, rate, &plcp, &power, &chains); - if (!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS)) { - if (plcp <= AR9170_TX_PHY_RATE_CCK_11M) - plcp |= ((skb->len + FCS_LEN) << (3 + 16)) + 0x0400; - else - plcp |= ((skb->len + FCS_LEN) << 16) + 0x0010; - } else { - ht1 |= AR9170_MAC_BCN_HT1_HT_EN; - if (rate->flags & IEEE80211_TX_RC_SHORT_GI) - plcp |= AR9170_MAC_BCN_HT2_SGI; - - if (rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { - ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_SHARED; - plcp |= AR9170_MAC_BCN_HT2_BW40; - } - if (rate->flags & IEEE80211_TX_RC_DUP_DATA) { - ht1 |= AR9170_MAC_BCN_HT1_BWC_40M_DUP; - plcp |= AR9170_MAC_BCN_HT2_BW40; - } - - SET_VAL(AR9170_MAC_BCN_HT2_LEN, plcp, skb->len + FCS_LEN); - } - - SET_VAL(AR9170_MAC_BCN_HT1_PWR_CTRL, ht1, 7); - SET_VAL(AR9170_MAC_BCN_HT1_TPC, ht1, power); - SET_VAL(AR9170_MAC_BCN_HT1_CHAIN_MASK, ht1, chains); - if (chains == AR9170_TX_PHY_TXCHAIN_2) - ht1 |= AR9170_MAC_BCN_HT1_TX_ANT1; + ht_rate = carl9170_tx_beacon_physet(ar, skb, &ht1, &plcp); carl9170_async_regwrite_begin(ar); carl9170_async_regwrite(AR9170_MAC_REG_BCN_HT1, ht1); - if (!(txinfo->control.rates[0].flags & IEEE80211_TX_RC_MCS)) - carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP, plcp); - else + if (ht_rate) carl9170_async_regwrite(AR9170_MAC_REG_BCN_HT2, plcp); + else + carl9170_async_regwrite(AR9170_MAC_REG_BCN_PLCP, plcp); for (i = 0; i < DIV_ROUND_UP(skb->len, 4); i++) { /* -- cgit v1.2.3 From 93476b1e685036e8513be8df34ca442096af6b4c Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Mon, 17 Dec 2012 22:06:08 +0100 Subject: ath9k: fix column header comments for some initval arrays Some 3-column initval arrays have wrong comments. The column of these arrays is indexed by the 'freqIndex' variable in 'ar5008_hw_process_ini' which only depends on the actual band. The 'initvals' tool from 'qca-swiss-army-knife' prints the correct comment lines for these arrays, since commit 'atheros-initvals: fix comments for non-fastclock 3-column tables' however the comments were not refreshed in ath9k. The patch contains no functional changes. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_initvals.h | 8 ++++---- drivers/net/wireless/ath/ath9k/ar9001_initvals.h | 4 ++-- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar5008_initvals.h b/drivers/net/wireless/ath/ath9k/ar5008_initvals.h index f81e7fc60a36..467ccfae2cee 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar5008_initvals.h @@ -466,7 +466,7 @@ static const u32 ar5416Bank0[][2] = { }; static const u32 ar5416BB_RfGain[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x00009a00, 0x00000000, 0x00000000}, {0x00009a04, 0x00000040, 0x00000040}, {0x00009a08, 0x00000080, 0x00000080}, @@ -546,12 +546,12 @@ static const u32 ar5416Bank2[][2] = { }; static const u32 ar5416Bank3[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x000098f0, 0x01400018, 0x01c00018}, }; static const u32 ar5416Bank6[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, @@ -588,7 +588,7 @@ static const u32 ar5416Bank6[][3] = { }; static const u32 ar5416Bank6TPC[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, diff --git a/drivers/net/wireless/ath/ath9k/ar9001_initvals.h b/drivers/net/wireless/ath/ath9k/ar9001_initvals.h index ea4a230997ac..59524e1d4678 100644 --- a/drivers/net/wireless/ath/ath9k/ar9001_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9001_initvals.h @@ -460,7 +460,7 @@ static const u32 ar5416Common_9100[][2] = { }; static const u32 ar5416Bank6_9100[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, @@ -497,7 +497,7 @@ static const u32 ar5416Bank6_9100[][3] = { }; static const u32 ar5416Bank6TPC_9100[][3] = { - /* Addr 5G_HT20 5G_HT40 */ + /* Addr 5G 2G */ {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, {0x0000989c, 0x00000000, 0x00000000}, -- cgit v1.2.3 From 70277f47b58b174a6b0b891dcd06ae5125afb73b Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 20 Dec 2012 14:31:51 +0100 Subject: iwlegacy: add flush callback Dump implementation of flush, which just wait until all TX queues become empty. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/3945-mac.c | 1 + drivers/net/wireless/iwlegacy/4965-mac.c | 1 + drivers/net/wireless/iwlegacy/common.c | 36 ++++++++++++++++++++++++++++++++ drivers/net/wireless/iwlegacy/common.h | 1 + 4 files changed, 39 insertions(+) diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index d604b4036a76..962400a20161 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -3474,6 +3474,7 @@ struct ieee80211_ops il3945_mac_ops = { .sta_add = il3945_mac_sta_add, .sta_remove = il_mac_sta_remove, .tx_last_beacon = il_mac_tx_last_beacon, + .flush = il_mac_flush, }; static int diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 6a86ed45835d..c40020c8b273 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -6308,6 +6308,7 @@ const struct ieee80211_ops il4965_mac_ops = { .sta_remove = il_mac_sta_remove, .channel_switch = il4965_mac_channel_switch, .tx_last_beacon = il_mac_tx_last_beacon, + .flush = il_mac_flush, }; static int diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 7e16d10a7f14..56b80219d695 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -4707,6 +4707,42 @@ out: } EXPORT_SYMBOL(il_mac_change_interface); +void +il_mac_flush(struct ieee80211_hw *hw, bool drop) +{ + struct il_priv *il = hw->priv; + unsigned long timeout = jiffies + msecs_to_jiffies(500); + int i; + + mutex_lock(&il->mutex); + D_MAC80211("enter\n"); + + if (il->txq == NULL) + goto out; + + for (i = 0; i < il->hw_params.max_txq_num; i++) { + struct il_queue *q; + + if (i == il->cmd_queue) + continue; + + q = &il->txq[i].q; + if (q->read_ptr == q->write_ptr) + continue; + + if (time_after(jiffies, timeout)) { + IL_ERR("Failed to flush queue %d\n", q->id); + break; + } + + msleep(20); + } +out: + D_MAC80211("leave\n"); + mutex_unlock(&il->mutex); +} +EXPORT_SYMBOL(il_mac_flush); + /* * On every watchdog tick we check (latest) time stamp. If it does not * change during timeout period and queue is not empty we reset firmware. diff --git a/drivers/net/wireless/iwlegacy/common.h b/drivers/net/wireless/iwlegacy/common.h index a9a569f432fb..37fe553b25e0 100644 --- a/drivers/net/wireless/iwlegacy/common.h +++ b/drivers/net/wireless/iwlegacy/common.h @@ -1723,6 +1723,7 @@ void il_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif); int il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum nl80211_iftype newtype, bool newp2p); +void il_mac_flush(struct ieee80211_hw *hw, bool drop); int il_alloc_txq_mem(struct il_priv *il); void il_free_txq_mem(struct il_priv *il); -- cgit v1.2.3 From 07db8f8fe9889a2db44d7692e5514a41d20e32c6 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 20 Dec 2012 14:31:53 +0100 Subject: iwlegacy: allow to enable PS Power save support was removed from iwlegacy due to possible firmware crashes problems it cause. I use to plan first inspect code to find reason of problems, fix them and then allow to enable PS. But realistically - code inspection will not happen, so let's do it, and wait for eventual bug reports. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/3945-mac.c | 5 ++++- drivers/net/wireless/iwlegacy/4965-mac.c | 4 ++-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index 962400a20161..3d76a3f595b7 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -3549,7 +3549,8 @@ il3945_setup_mac(struct il_priv *il) hw->vif_data_size = sizeof(struct il_vif_priv); /* Tell mac80211 our characteristics */ - hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SPECTRUM_MGMT; + hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SPECTRUM_MGMT | + IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC); @@ -3558,6 +3559,8 @@ il3945_setup_mac(struct il_priv *il) WIPHY_FLAG_CUSTOM_REGULATORY | WIPHY_FLAG_DISABLE_BEACON_HINTS | WIPHY_FLAG_IBSS_RSN; + hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945; /* we create the 802.11 header and a zero-length SSID element */ hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2; diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index c40020c8b273..10fc2493f415 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -5712,8 +5712,8 @@ il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length) hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_NEED_DTIM_PERIOD | IEEE80211_HW_SPECTRUM_MGMT | - IEEE80211_HW_REPORTS_TX_ACK_STATUS; - + IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_PS | + IEEE80211_HW_SUPPORTS_DYNAMIC_PS; if (il->cfg->sku & IL_SKU_N) hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | -- cgit v1.2.3 From c2397bb0c55495d8474c36143fdaced5c435a5e4 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sat, 22 Dec 2012 22:07:14 +0100 Subject: brcmsmac: initialize morepending in brcms_b_recv() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drivers/net/wireless/brcm80211/brcmsmac/main.c: In function ‘brcms_b_recv’: drivers/net/wireless/brcm80211/brcmsmac/main.c:7636: warning: ‘morepending’ may be used uninitialized in this function Signed-off-by: Geert Uytterhoeven Acked-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 17594de4199e..5f0f444f85a3 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -7633,7 +7633,7 @@ brcms_b_recv(struct brcms_hardware *wlc_hw, uint fifo, bool bound) uint n = 0; uint bound_limit = bound ? RXBND : -1; - bool morepending; + bool morepending = false; skb_queue_head_init(&recv_frames); -- cgit v1.2.3 From e1b97c9bc5902ec8b36247bcb7c3552895611485 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 26 Dec 2012 12:27:38 +0530 Subject: ath9k_hw: Remove AR9485 1.0 macro Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/reg.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index ad3c82c09177..0ac205e4cd04 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -884,9 +884,6 @@ #define AR_SREV_9485(_ah) \ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9485)) -#define AR_SREV_9485_10(_ah) \ - (AR_SREV_9485(_ah) && \ - ((_ah)->hw_version.macRev == AR_SREV_REVISION_9485_10)) #define AR_SREV_9485_11(_ah) \ (AR_SREV_9485(_ah) && \ ((_ah)->hw_version.macRev == AR_SREV_REVISION_9485_11)) -- cgit v1.2.3 From a02308e931ad0bba19803779bec491c4b2d67b47 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sat, 29 Dec 2012 14:51:51 +0100 Subject: rt2x00: rt2800: convert read_eeprom functions to return an int value Both the rtt2x00usb_eeprom_read and the ioremap functions are allowed to fail, however their return values are not checked in the read_eeprom functions in the rt2800{pci,usb} drivers. The patch adds the missing checks, and converts all read_eeprom functions to return an int value, so the error values can be propagated up to the 'rt2800_validate_eeprom' function. Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 9 +++++++-- drivers/net/wireless/rt2x00/rt2800lib.h | 8 ++++---- drivers/net/wireless/rt2x00/rt2800pci.c | 35 ++++++++++++++++++++++----------- drivers/net/wireless/rt2x00/rt2800usb.c | 12 +++++++---- 4 files changed, 43 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 0ece3537106d..f139a913c25a 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4671,12 +4671,14 @@ static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) mutex_unlock(&rt2x00dev->csr_mutex); } -void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { unsigned int i; for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8) rt2800_efuse_read(rt2x00dev, i); + + return 0; } EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse); @@ -4686,11 +4688,14 @@ static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) u16 word; u8 *mac; u8 default_lna_gain; + int retval; /* * Read the EEPROM. */ - rt2800_read_eeprom(rt2x00dev); + retval = rt2800_read_eeprom(rt2x00dev); + if (retval) + return retval; /* * Start validation of the data that has been read. diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index a128ceadcb3e..6ec739466db4 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -43,7 +43,7 @@ struct rt2800_ops { const unsigned int offset, const struct rt2x00_field32 field, u32 *reg); - void (*read_eeprom)(struct rt2x00_dev *rt2x00dev); + int (*read_eeprom)(struct rt2x00_dev *rt2x00dev); bool (*hwcrypt_disabled)(struct rt2x00_dev *rt2x00dev); int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev, @@ -117,11 +117,11 @@ static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev, return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg); } -static inline void rt2800_read_eeprom(struct rt2x00_dev *rt2x00dev) +static inline int rt2800_read_eeprom(struct rt2x00_dev *rt2x00dev) { const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; - rt2800ops->read_eeprom(rt2x00dev); + return rt2800ops->read_eeprom(rt2x00dev); } static inline bool rt2800_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev) @@ -207,7 +207,7 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev); void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev); int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev); -void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev); +int rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev); int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 9224d874bf24..0e8d1705e368 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -90,17 +90,22 @@ static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) } #if defined(CONFIG_RALINK_RT288X) || defined(CONFIG_RALINK_RT305X) -static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) +static int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) { void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE); + if (!base_addr) + return -ENOMEM; + memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); iounmap(base_addr); + return 0; } #else -static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) +static inline int rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev) { + return -ENOMEM; } #endif /* CONFIG_RALINK_RT288X || CONFIG_RALINK_RT305X */ @@ -135,7 +140,7 @@ static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom) rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg); } -static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) +static int rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) { struct eeprom_93cx6 eeprom; u32 reg; @@ -164,6 +169,8 @@ static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, EEPROM_SIZE / sizeof(u16)); + + return 0; } static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) @@ -171,13 +178,14 @@ static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) return rt2800_efuse_detect(rt2x00dev); } -static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +static inline int rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { - rt2800_read_eeprom_efuse(rt2x00dev); + return rt2800_read_eeprom_efuse(rt2x00dev); } #else -static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) +static inline int rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) { + return -EOPNOTSUPP; } static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) @@ -185,8 +193,9 @@ static inline int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) return 0; } -static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) +static inline int rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { + return -EOPNOTSUPP; } #endif /* CONFIG_PCI */ @@ -970,14 +979,18 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) /* * Device probe functions. */ -static void rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev) +static int rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev) { + int retval; + if (rt2x00_is_soc(rt2x00dev)) - rt2800pci_read_eeprom_soc(rt2x00dev); + retval = rt2800pci_read_eeprom_soc(rt2x00dev); else if (rt2800pci_efuse_detect(rt2x00dev)) - rt2800pci_read_eeprom_efuse(rt2x00dev); + retval = rt2800pci_read_eeprom_efuse(rt2x00dev); else - rt2800pci_read_eeprom_pci(rt2x00dev); + retval = rt2800pci_read_eeprom_pci(rt2x00dev); + + return retval; } static const struct ieee80211_ops rt2800pci_mac80211_ops = { diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 5c149b58ab46..4721cada1591 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -735,13 +735,17 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, /* * Device probe functions. */ -static void rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev) +static int rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev) { + int retval; + if (rt2800_efuse_detect(rt2x00dev)) - rt2800_read_eeprom_efuse(rt2x00dev); + retval = rt2800_read_eeprom_efuse(rt2x00dev); else - rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, - EEPROM_SIZE); + retval = rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, + EEPROM_SIZE); + + return retval; } static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) -- cgit v1.2.3 From 01486c5ad388c8a38f2e075666e8c2ee32bda4b6 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Wed, 2 Jan 2013 15:22:34 +0100 Subject: brcmsmac: increase timer reference count for new timers only On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index f0fc8cd4d5df..f8e2591961ab 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -1409,9 +1409,10 @@ void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic) #endif t->ms = ms; t->periodic = (bool) periodic; - t->set = true; - - atomic_inc(&t->wl->callbacks); + if (!t->set) { + t->set = true; + atomic_inc(&t->wl->callbacks); + } ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms)); } -- cgit v1.2.3 From 66578c0a8cb8c34ef284acf34e05f2d8e7416ee1 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:35 +0100 Subject: brcmsmac: use perimeter lock in add_interface() callback All callbacks that access driver functions should do that under perimeter lock protection. The add_interface() callback was lacking this lock. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index f8e2591961ab..b5b4487006f3 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -362,8 +362,10 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) return -EOPNOTSUPP; } + spin_lock_bh(&wl->lock); wl->mute_tx = false; brcms_c_mute(wl->wlc, false); + spin_unlock_bh(&wl->lock); return 0; } -- cgit v1.2.3 From b180b10056e204fa1f65f0494215d73eb8253c87 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:36 +0100 Subject: brcmsmac: allow user-space setting of interface address The interface address of the wireless device is determined by the permanent address stored in the device. This patch allows it to be overridden from user-space. Reported-by: Maximilian Engelhardt Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 1 + drivers/net/wireless/brcm80211/brcmsmac/main.c | 7 +++---- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index b5b4487006f3..7fc49ca3f597 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -363,6 +363,7 @@ brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) } spin_lock_bh(&wl->lock); + memcpy(wl->pub->cur_etheraddr, vif->addr, sizeof(vif->addr)); wl->mute_tx = false; brcms_c_mute(wl->wlc, false); spin_unlock_bh(&wl->lock); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 5f0f444f85a3..c26992a60e6c 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -2473,6 +2473,7 @@ static void brcms_b_tx_fifo_resume(struct brcms_hardware *wlc_hw, static void brcms_b_mute(struct brcms_hardware *wlc_hw, bool mute_tx) { static const u8 null_ether_addr[ETH_ALEN] = {0, 0, 0, 0, 0, 0}; + u8 *ethaddr = wlc_hw->wlc->pub->cur_etheraddr; if (mute_tx) { /* suspend tx fifos */ @@ -2482,8 +2483,7 @@ static void brcms_b_mute(struct brcms_hardware *wlc_hw, bool mute_tx) brcms_b_tx_fifo_suspend(wlc_hw, TX_AC_VI_FIFO); /* zero the address match register so we do not send ACKs */ - brcms_b_set_addrmatch(wlc_hw, RCM_MAC_OFFSET, - null_ether_addr); + brcms_b_set_addrmatch(wlc_hw, RCM_MAC_OFFSET, null_ether_addr); } else { /* resume tx fifos */ brcms_b_tx_fifo_resume(wlc_hw, TX_DATA_FIFO); @@ -2492,8 +2492,7 @@ static void brcms_b_mute(struct brcms_hardware *wlc_hw, bool mute_tx) brcms_b_tx_fifo_resume(wlc_hw, TX_AC_VI_FIFO); /* Restore address */ - brcms_b_set_addrmatch(wlc_hw, RCM_MAC_OFFSET, - wlc_hw->etheraddr); + brcms_b_set_addrmatch(wlc_hw, RCM_MAC_OFFSET, ethaddr); } wlc_phy_mute_upd(wlc_hw->band->pi, mute_tx, 0); -- cgit v1.2.3 From 637ccc27f46f2232267e689b6f8eb744f78f4810 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Wed, 2 Jan 2013 15:22:37 +0100 Subject: brcmsmac: remove dead code Dead code after AMPDU restructure. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/ampdu.c | 7 ++----- drivers/net/wireless/brcm80211/brcmsmac/scb.h | 1 - 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c index 1de94f30564f..1585cc5bf866 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/ampdu.c @@ -961,7 +961,6 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, /* if acked then clear bit and free packet */ if ((bindex < AMPDU_TX_BA_MAX_WSIZE) && isset(bitmap, bindex)) { - ini->tx_in_transit--; ini->txretry[index] = 0; /* @@ -990,7 +989,6 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, if (retry && (ini->txretry[index] < (int)retry_limit)) { int ret; ini->txretry[index]++; - ini->tx_in_transit--; ret = brcms_c_txfifo(wlc, queue, p); /* * We shouldn't be out of space in the DMA @@ -1000,7 +998,6 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, WARN_ONCE(ret, "queue %d out of txds\n", queue); } else { /* Retry timeout */ - ini->tx_in_transit--; ieee80211_tx_info_clear_status(tx_info); tx_info->status.ampdu_ack_len = 0; tx_info->status.ampdu_len = 1; @@ -1009,8 +1006,8 @@ brcms_c_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb, skb_pull(p, D11_PHY_HDR_LEN); skb_pull(p, D11_TXH_LEN); brcms_dbg_ht(wlc->hw->d11core, - "BA Timeout, seq %d, in_transit %d\n", - seq, ini->tx_in_transit); + "BA Timeout, seq %d\n", + seq); ieee80211_tx_status_irqsafe(wlc->pub->ieee_hw, p); } diff --git a/drivers/net/wireless/brcm80211/brcmsmac/scb.h b/drivers/net/wireless/brcm80211/brcmsmac/scb.h index 51c79c7239b7..3a3d73699f83 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/scb.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/scb.h @@ -36,7 +36,6 @@ /* structure to store per-tid state for the ampdu initiator */ struct scb_ampdu_tid_ini { - u8 tx_in_transit; /* number of pending mpdus in transit in driver */ u8 tid; /* initiator tid for easy lookup */ /* tx retry count; indexed by seq modulo */ u8 txretry[AMPDU_TX_BA_MAX_WSIZE]; -- cgit v1.2.3 From 0429a6fa6be9489bf451e9fcc0f97341e4a356b6 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:38 +0100 Subject: brcmfmac: do not reconfigure refill rx on 0-length packet. When USB device gets removed rx complete comes with 0-length packets. Do not refill those packets. In some rare cases it can cause infinite loop. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/usb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 914c56fe6c5f..22eae57d9546 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -467,7 +467,11 @@ static void brcmf_usb_rx_complete(struct urb *urb) devinfo->bus_pub.bus->dstats.rx_errors++; } else brcmf_rx_packet(devinfo->dev, ifidx, skb); - brcmf_usb_rx_refill(devinfo, req); + /* zero lenght packets indicate usb "failure". Do not refill */ + if (urb->actual_length) + brcmf_usb_rx_refill(devinfo, req); + else + brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); } else { brcmu_pkt_buf_free_skb(skb); brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); -- cgit v1.2.3 From ac744395ba0a0491f8524a8371ad6f7df67bf673 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:39 +0100 Subject: brcmfmac: removed deprecated set_bitrate_mask support Set bitrate_mask is not desired anymore. The firmware will determine the correct rates to be used. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 62 ---------------------- 1 file changed, 62 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 1261a9b84e04..ee4eb4446892 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2011,67 +2011,6 @@ done: return err; } -static s32 -brcmf_cfg80211_set_bitrate_mask(struct wiphy *wiphy, struct net_device *ndev, - const u8 *addr, - const struct cfg80211_bitrate_mask *mask) -{ - struct brcmf_if *ifp = netdev_priv(ndev); - struct brcm_rateset_le rateset_le; - s32 rate; - s32 val; - s32 err_bg; - s32 err_a; - u32 legacy; - s32 err = 0; - - brcmf_dbg(TRACE, "Enter\n"); - if (!check_vif_up(ifp->vif)) - return -EIO; - - /* addr param is always NULL. ignore it */ - /* Get current rateset */ - err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CURR_RATESET, - &rateset_le, sizeof(rateset_le)); - if (err) { - brcmf_err("could not get current rateset (%d)\n", err); - goto done; - } - - legacy = ffs(mask->control[IEEE80211_BAND_2GHZ].legacy & 0xFFFF); - if (!legacy) - legacy = ffs(mask->control[IEEE80211_BAND_5GHZ].legacy & - 0xFFFF); - - val = wl_g_rates[legacy - 1].bitrate * 100000; - - if (val < le32_to_cpu(rateset_le.count)) - /* Select rate by rateset index */ - rate = rateset_le.rates[val] & 0x7f; - else - /* Specified rate in bps */ - rate = val / 500000; - - brcmf_dbg(CONN, "rate %d mbps\n", rate / 2); - - /* - * - * Set rate override, - * Since the is a/b/g-blind, both a/bg_rate are enforced. - */ - err_bg = brcmf_fil_iovar_int_set(ifp, "bg_rate", rate); - err_a = brcmf_fil_iovar_int_set(ifp, "a_rate", rate); - if (err_bg && err_a) { - brcmf_err("could not set fixed rate (%d) (%d)\n", err_bg, - err_a); - err = err_bg | err_a; - } - -done: - brcmf_dbg(TRACE, "Exit\n"); - return err; -} - static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg, struct brcmf_bss_info_le *bi) { @@ -3703,7 +3642,6 @@ static struct cfg80211_ops wl_cfg80211_ops = { .set_default_key = brcmf_cfg80211_config_default_key, .set_default_mgmt_key = brcmf_cfg80211_config_default_mgmt_key, .set_power_mgmt = brcmf_cfg80211_set_power_mgmt, - .set_bitrate_mask = brcmf_cfg80211_set_bitrate_mask, .connect = brcmf_cfg80211_connect, .disconnect = brcmf_cfg80211_disconnect, .suspend = brcmf_cfg80211_suspend, -- cgit v1.2.3 From 81d5f1bbc47961b2347d2b92b2aec56e6bad8779 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:40 +0100 Subject: brcmfmac: assure USB dongle firmware is reset upon module unload Upon unloading the brcmfmac module the USB firmware should be reset as the device remains powered. The reset assures a known device state when a new brcmfmac driver load is being done. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 1 + drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h | 3 ++- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 11 +++++++++++ drivers/net/wireless/brcm80211/brcmfmac/usb.c | 13 +++++++++++++ 4 files changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index fd672bf53867..7245b171190a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -39,6 +39,7 @@ #define BRCMF_C_GET_BSSID 23 #define BRCMF_C_GET_SSID 25 #define BRCMF_C_SET_SSID 26 +#define BRCMF_C_TERMINATED 28 #define BRCMF_C_GET_CHANNEL 29 #define BRCMF_C_SET_CHANNEL 30 #define BRCMF_C_GET_SRL 31 diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index dd38b78a9726..358b54fff795 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -154,7 +154,8 @@ static inline void brcmf_rx_packet(struct device *dev, int ifidx, extern int brcmf_attach(uint bus_hdrlen, struct device *dev); /* Indication from bus module regarding removal/absence of dongle */ extern void brcmf_detach(struct device *dev); - +/* Indication from bus module that dongle should be reset */ +extern void brcmf_dev_reset(struct device *dev); /* Indication from bus module to change flow-control state */ extern void brcmf_txflowblock(struct device *dev, bool state); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 74a616b4de8e..16efcb48dfbc 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -845,6 +845,17 @@ static void brcmf_bus_detach(struct brcmf_pub *drvr) } } +void brcmf_dev_reset(struct device *dev) +{ + struct brcmf_bus *bus_if = dev_get_drvdata(dev); + struct brcmf_pub *drvr = bus_if->drvr; + + if (drvr == NULL) + return; + + brcmf_fil_cmd_int_set(drvr->iflist[0], BRCMF_C_TERMINATED, 1); +} + void brcmf_detach(struct device *dev) { int i; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 22eae57d9546..1df85955ad93 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1524,10 +1524,23 @@ static void brcmf_release_fw(struct list_head *q) } } +static int brcmf_usb_reset_device(struct device *dev, void *notused) +{ + /* device past is the usb interface so we + * need to use parent here. + */ + brcmf_dev_reset(dev->parent); + return 0; +} void brcmf_usb_exit(void) { + struct device_driver *drv = &brcmf_usbdrvr.drvwrap.driver; + int ret; + brcmf_dbg(USB, "Enter\n"); + ret = driver_for_each_device(drv, NULL, NULL, + brcmf_usb_reset_device); usb_deregister(&brcmf_usbdrvr); brcmf_release_fw(&fw_image_list); } -- cgit v1.2.3 From 79d7c4e8da4ac3cfa98e8e622a17baaeb3c9d29d Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 21:20:10 +0100 Subject: brcmfmac: define pr_fmt in one place Several source files (but not all) define the pr_fmt() macro in exactly the same way. Instead this commit defines it in a header file so driver logging is consistent. Cc: Joe Perches Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 2 -- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 2 -- drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 2 -- drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c | 2 -- drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h | 4 ++++ drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 2 -- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 2 -- drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c | 2 -- drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 2 -- 9 files changed, 4 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index be35a2f99b1c..11fd1c735589 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -15,8 +15,6 @@ */ /* ****************** SDIO CARD Interface Functions **************************/ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index d33e5598611b..d92d373733d7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -14,8 +14,6 @@ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index 83923553f1ac..0c83998af181 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -19,8 +19,6 @@ * For certain dcmd codes, the dongle interprets string data from the host. ******************************************************************************/ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index f8b52e5b941a..4544342a0428 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -14,8 +14,6 @@ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h index f2ab01cd7966..ea3f5f5a6ab9 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h @@ -34,6 +34,10 @@ #define BRCMF_SCAN_VAL 0x4000 #define BRCMF_CONN_VAL 0x8000 +/* set default print format */ +#undef pr_fmt +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + /* Macro for error messages. net_ratelimit() is used when driver * debugging is not selected. When debugging the driver error * messages are as important as other tracing or even more so. diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 16efcb48dfbc..6520b587d4c8 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -14,8 +14,6 @@ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index cf857f1edf8c..651474bc1ce3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -14,8 +14,6 @@ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c index b1bb46c49799..14be2d5530ce 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c @@ -15,8 +15,6 @@ */ /* ***** SDIO interface chip backplane handle functions ***** */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index ee4eb4446892..1ec2d573abc2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -16,8 +16,6 @@ /* Toplevel file. Relies on dhd_linux.c to send commands to the dongle. */ -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #include #include -- cgit v1.2.3 From 3aa7aad2b2da32dd897900ab3eb62348a54d2dc1 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:42 +0100 Subject: brcmfmac: remove rx helper function from bus interface The bus interface provided a wrapper function to pass a single packet to the common driver part filling a skb queue with one packet. For clarity the caller now sets up the skb queue and call the rx bus interface function. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h | 13 ++----------- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 4 ++-- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 7 +++++-- drivers/net/wireless/brcm80211/brcmfmac/usb.c | 5 ++++- 4 files changed, 13 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 358b54fff795..639bc2a2d03c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -138,17 +138,8 @@ extern bool brcmf_c_prec_enq(struct device *dev, struct pktq *q, struct sk_buff *pkt, int prec); /* Receive frame for delivery to OS. Callee disposes of rxp. */ -extern void brcmf_rx_frame(struct device *dev, u8 ifidx, - struct sk_buff_head *rxlist); -static inline void brcmf_rx_packet(struct device *dev, int ifidx, - struct sk_buff *pkt) -{ - struct sk_buff_head q; - - skb_queue_head_init(&q); - skb_queue_tail(&q, pkt); - brcmf_rx_frame(dev, ifidx, &q); -} +extern void brcmf_rx_frames(struct device *dev, u8 ifidx, + struct sk_buff_head *rxlist); /* Indication from bus module regarding presence/insertion of dongle. */ extern int brcmf_attach(uint bus_hdrlen, struct device *dev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 6520b587d4c8..a820f58100b7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -248,8 +248,8 @@ void brcmf_txflowblock(struct device *dev, bool state) } } -void brcmf_rx_frame(struct device *dev, u8 ifidx, - struct sk_buff_head *skb_list) +void brcmf_rx_frames(struct device *dev, u8 ifidx, + struct sk_buff_head *skb_list) { unsigned char *eth; uint len; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 651474bc1ce3..13ea9b48acdb 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1405,7 +1405,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } /* sent any remaining packets up */ if (bus->glom.qlen) - brcmf_rx_frame(bus->sdiodev->dev, ifidx, &bus->glom); + brcmf_rx_frames(bus->sdiodev->dev, ifidx, &bus->glom); bus->sdcnt.rxglomframes++; bus->sdcnt.rxglompkts += bus->glom.qlen; @@ -1556,6 +1556,7 @@ static void brcmf_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen) static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) { struct sk_buff *pkt; /* Packet for event or data frames */ + struct sk_buff_head pktlist; /* needed for bus interface */ u16 pad; /* Number of pad bytes to read */ uint rxleft = 0; /* Remaining number of frames allowed */ int sdret; /* Return code from calls */ @@ -1766,7 +1767,9 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) continue; } - brcmf_rx_packet(bus->sdiodev->dev, ifidx, pkt); + skb_queue_head_init(&pktlist); + skb_queue_tail(&pktlist, pkt); + brcmf_rx_frames(bus->sdiodev->dev, ifidx, &pktlist); } rxcount = maxframes - rxleft; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 1df85955ad93..34342ff718db 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -443,6 +443,7 @@ static void brcmf_usb_rx_complete(struct urb *urb) struct brcmf_usbreq *req = (struct brcmf_usbreq *)urb->context; struct brcmf_usbdev_info *devinfo = req->devinfo; struct sk_buff *skb; + struct sk_buff_head skbq; int ifidx = 0; brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status); @@ -460,13 +461,15 @@ static void brcmf_usb_rx_complete(struct urb *urb) } if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) { + skb_queue_head_init(&skbq); + skb_queue_tail(&skbq, skb); skb_put(skb, urb->actual_length); if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) { brcmf_err("rx protocol error\n"); brcmu_pkt_buf_free_skb(skb); devinfo->bus_pub.bus->dstats.rx_errors++; } else - brcmf_rx_packet(devinfo->dev, ifidx, skb); + brcmf_rx_frames(devinfo->dev, ifidx, &skbq); /* zero lenght packets indicate usb "failure". Do not refill */ if (urb->actual_length) brcmf_usb_rx_refill(devinfo, req); -- cgit v1.2.3 From a43af515f6252e62604a1bfc139d43fa43ef5b6f Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:43 +0100 Subject: brcmfmac: remove brcmf_proto_hdrpull() from bus interface The use of the function brcmf_proto_hdrpull() is moved to the common part of the driver and consequently it can be removed from the bus interface. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 4 ++++ drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h | 7 +------ drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 6 +++--- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 19 +++++++++++++++---- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 19 ++----------------- drivers/net/wireless/brcm80211/brcmfmac/usb.c | 17 ++++------------- 6 files changed, 29 insertions(+), 43 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 7245b171190a..4937bf4d5506 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -577,6 +577,10 @@ extern int brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, extern int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, void *buf, uint len); +/* Remove any protocol-specific data header. */ +extern int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, + struct sk_buff *rxp); + extern int brcmf_net_attach(struct brcmf_if *ifp); extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx, s32 bssidx, char *name, u8 *mac_addr); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index 639bc2a2d03c..64c38f4226a3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -130,16 +130,11 @@ int brcmf_bus_rxctl(struct brcmf_bus *bus, unsigned char *msg, uint len) * interface functions from common layer */ -/* Remove any protocol-specific data header. */ -extern int brcmf_proto_hdrpull(struct device *dev, int *ifidx, - struct sk_buff *rxp); - extern bool brcmf_c_prec_enq(struct device *dev, struct pktq *q, struct sk_buff *pkt, int prec); /* Receive frame for delivery to OS. Callee disposes of rxp. */ -extern void brcmf_rx_frames(struct device *dev, u8 ifidx, - struct sk_buff_head *rxlist); +extern void brcmf_rx_frames(struct device *dev, struct sk_buff_head *rxlist); /* Indication from bus module regarding presence/insertion of dongle. */ extern int brcmf_attach(uint bus_hdrlen, struct device *dev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index 0c83998af181..aa37f3e614b6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -303,12 +303,10 @@ void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx, BDC_SET_IF_IDX(h, ifidx); } -int brcmf_proto_hdrpull(struct device *dev, int *ifidx, +int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, struct sk_buff *pktbuf) { struct brcmf_proto_bdc_header *h; - struct brcmf_bus *bus_if = dev_get_drvdata(dev); - struct brcmf_pub *drvr = bus_if->drvr; brcmf_dbg(TRACE, "Enter\n"); @@ -346,6 +344,8 @@ int brcmf_proto_hdrpull(struct device *dev, int *ifidx, skb_pull(pktbuf, BDC_HEADER_LEN); skb_pull(pktbuf, h->data_offset << 2); + if (pktbuf->len == 0) + return -ENODATA; return 0; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index a820f58100b7..682cb02a4674 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -248,8 +248,7 @@ void brcmf_txflowblock(struct device *dev, bool state) } } -void brcmf_rx_frames(struct device *dev, u8 ifidx, - struct sk_buff_head *skb_list) +void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) { unsigned char *eth; uint len; @@ -257,12 +256,24 @@ void brcmf_rx_frames(struct device *dev, u8 ifidx, struct brcmf_if *ifp; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; + u8 ifidx; + int ret; brcmf_dbg(TRACE, "Enter\n"); skb_queue_walk_safe(skb_list, skb, pnext) { skb_unlink(skb, skb_list); + /* process and remove protocol-specific header + */ + ret = brcmf_proto_hdrpull(drvr, &ifidx, skb); + if (ret < 0) { + if (ret != -ENODATA) + bus_if->dstats.rx_errors++; + brcmu_pkt_buf_free_skb(skb); + continue; + } + /* Get the protocol, maintain skb around eth_type_trans() * The main reason for this hack is for the limitation of * Linux 2.4 where 'eth_type_trans' uses the @@ -326,13 +337,13 @@ void brcmf_rx_frames(struct device *dev, u8 ifidx, void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success) { - uint ifidx; + u8 ifidx; struct ethhdr *eh; u16 type; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; - brcmf_proto_hdrpull(dev, &ifidx, txp); + brcmf_proto_hdrpull(drvr, &ifidx, txp); eh = (struct ethhdr *)(txp->data); type = ntohs(eh->h_proto); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 13ea9b48acdb..7fef9b5ba003 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1167,7 +1167,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) int errcode; u8 doff, sfdoff; - int ifidx = 0; bool usechain = bus->use_rxchain; struct brcmf_sdio_read rd_new; @@ -1386,13 +1385,6 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) skb_unlink(pfirst, &bus->glom); brcmu_pkt_buf_free_skb(pfirst); continue; - } else if (brcmf_proto_hdrpull(bus->sdiodev->dev, - &ifidx, pfirst) != 0) { - brcmf_err("rx protocol error\n"); - bus->sdiodev->bus_if->dstats.rx_errors++; - skb_unlink(pfirst, &bus->glom); - brcmu_pkt_buf_free_skb(pfirst); - continue; } brcmf_dbg_hex_dump(BRCMF_GLOM_ON(), @@ -1405,7 +1397,7 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) } /* sent any remaining packets up */ if (bus->glom.qlen) - brcmf_rx_frames(bus->sdiodev->dev, ifidx, &bus->glom); + brcmf_rx_frames(bus->sdiodev->dev, &bus->glom); bus->sdcnt.rxglomframes++; bus->sdcnt.rxglompkts += bus->glom.qlen; @@ -1560,7 +1552,6 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) u16 pad; /* Number of pad bytes to read */ uint rxleft = 0; /* Remaining number of frames allowed */ int sdret; /* Return code from calls */ - int ifidx = 0; uint rxcount = 0; /* Total frames read */ struct brcmf_sdio_read *rd = &bus->cur_read, rd_new; u8 head_read = 0; @@ -1759,17 +1750,11 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) if (pkt->len == 0) { brcmu_pkt_buf_free_skb(pkt); continue; - } else if (brcmf_proto_hdrpull(bus->sdiodev->dev, &ifidx, - pkt) != 0) { - brcmf_err("rx protocol error\n"); - brcmu_pkt_buf_free_skb(pkt); - bus->sdiodev->bus_if->dstats.rx_errors++; - continue; } skb_queue_head_init(&pktlist); skb_queue_tail(&pktlist, pkt); - brcmf_rx_frames(bus->sdiodev->dev, ifidx, &pktlist); + brcmf_rx_frames(bus->sdiodev->dev, &pktlist); } rxcount = maxframes - rxleft; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 34342ff718db..e15630cc3889 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -444,14 +444,14 @@ static void brcmf_usb_rx_complete(struct urb *urb) struct brcmf_usbdev_info *devinfo = req->devinfo; struct sk_buff *skb; struct sk_buff_head skbq; - int ifidx = 0; brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status); brcmf_usb_del_fromq(devinfo, req); skb = req->skb; req->skb = NULL; - if (urb->status == 0) { + /* zero lenght packets indicate usb "failure". Do not refill */ + if (urb->status == 0 && urb->actual_length) { devinfo->bus_pub.bus->dstats.rx_packets++; } else { devinfo->bus_pub.bus->dstats.rx_errors++; @@ -464,17 +464,8 @@ static void brcmf_usb_rx_complete(struct urb *urb) skb_queue_head_init(&skbq); skb_queue_tail(&skbq, skb); skb_put(skb, urb->actual_length); - if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) { - brcmf_err("rx protocol error\n"); - brcmu_pkt_buf_free_skb(skb); - devinfo->bus_pub.bus->dstats.rx_errors++; - } else - brcmf_rx_frames(devinfo->dev, ifidx, &skbq); - /* zero lenght packets indicate usb "failure". Do not refill */ - if (urb->actual_length) - brcmf_usb_rx_refill(devinfo, req); - else - brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); + brcmf_rx_frames(devinfo->dev, &skbq); + brcmf_usb_rx_refill(devinfo, req); } else { brcmu_pkt_buf_free_skb(skb); brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL); -- cgit v1.2.3 From a6cfb1477d23aa251a1a4b0285fb385d94cdde51 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:44 +0100 Subject: brcmfmac: Use dedicated trace level for CDC. CDC debug is partly done with TRACE and partly with CTL, however CDC hardly ever needs debugging. Use dedicated level CDC and replace TRACE and CTL in dhd_cdc with that. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 16 +++++------ drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h | 31 +++++++++++----------- .../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 2 +- 3 files changed, 24 insertions(+), 25 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index aa37f3e614b6..db3bc2e99902 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -105,7 +105,7 @@ static int brcmf_proto_cdc_msg(struct brcmf_pub *drvr) int len = le32_to_cpu(prot->msg.len) + sizeof(struct brcmf_proto_cdc_dcmd); - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(CDC, "Enter\n"); /* NOTE : cdc->msg.len holds the desired length of the buffer to be * returned. Only up to CDC_MAX_MSG_SIZE of this buffer area @@ -123,7 +123,7 @@ static int brcmf_proto_cdc_cmplt(struct brcmf_pub *drvr, u32 id, u32 len) int ret; struct brcmf_proto *prot = drvr->prot; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(CDC, "Enter\n"); len += sizeof(struct brcmf_proto_cdc_dcmd); do { ret = brcmf_bus_rxctl(drvr->bus_if, (unsigned char *)&prot->msg, @@ -145,8 +145,7 @@ brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, int ret = 0, retries = 0; u32 id, flags; - brcmf_dbg(TRACE, "Enter\n"); - brcmf_dbg(CTL, "cmd %d len %d\n", cmd, len); + brcmf_dbg(CDC, "Enter, cmd %d len %d\n", cmd, len); /* Respond "bcmerror" and "bcmerrorstr" with local cache */ if (cmd == BRCMF_C_GET_VAR && buf) { @@ -226,8 +225,7 @@ int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, int ret = 0; u32 flags, id; - brcmf_dbg(TRACE, "Enter\n"); - brcmf_dbg(CTL, "cmd %d len %d\n", cmd, len); + brcmf_dbg(CDC, "Enter, cmd %d len %d\n", cmd, len); memset(msg, 0, sizeof(struct brcmf_proto_cdc_dcmd)); @@ -285,7 +283,7 @@ void brcmf_proto_hdrpush(struct brcmf_pub *drvr, int ifidx, { struct brcmf_proto_bdc_header *h; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(CDC, "Enter\n"); /* Push BDC header used to convey priority for buses that don't */ @@ -308,7 +306,7 @@ int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, { struct brcmf_proto_bdc_header *h; - brcmf_dbg(TRACE, "Enter\n"); + brcmf_dbg(CDC, "Enter\n"); /* Pop BDC header used to convey priority for buses that don't */ @@ -334,7 +332,7 @@ int brcmf_proto_hdrpull(struct brcmf_pub *drvr, u8 *ifidx, } if (h->flags & BDC_FLAG_SUM_GOOD) { - brcmf_dbg(INFO, "%s: BDC packet received with good rx-csum, flags 0x%x\n", + brcmf_dbg(CDC, "%s: BDC rcv, good checksum, flags 0x%x\n", brcmf_ifname(drvr, *ifidx), h->flags); pkt_set_sum_good(pktbuf, true); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h index ea3f5f5a6ab9..bc013cbe06f6 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_dbg.h @@ -18,21 +18,22 @@ #define _BRCMF_DBG_H_ /* message levels */ -#define BRCMF_TRACE_VAL 0x0002 -#define BRCMF_INFO_VAL 0x0004 -#define BRCMF_DATA_VAL 0x0008 -#define BRCMF_CTL_VAL 0x0010 -#define BRCMF_TIMER_VAL 0x0020 -#define BRCMF_HDRS_VAL 0x0040 -#define BRCMF_BYTES_VAL 0x0080 -#define BRCMF_INTR_VAL 0x0100 -#define BRCMF_GLOM_VAL 0x0200 -#define BRCMF_EVENT_VAL 0x0400 -#define BRCMF_BTA_VAL 0x0800 -#define BRCMF_FIL_VAL 0x1000 -#define BRCMF_USB_VAL 0x2000 -#define BRCMF_SCAN_VAL 0x4000 -#define BRCMF_CONN_VAL 0x8000 +#define BRCMF_TRACE_VAL 0x00000002 +#define BRCMF_INFO_VAL 0x00000004 +#define BRCMF_DATA_VAL 0x00000008 +#define BRCMF_CTL_VAL 0x00000010 +#define BRCMF_TIMER_VAL 0x00000020 +#define BRCMF_HDRS_VAL 0x00000040 +#define BRCMF_BYTES_VAL 0x00000080 +#define BRCMF_INTR_VAL 0x00000100 +#define BRCMF_GLOM_VAL 0x00000200 +#define BRCMF_EVENT_VAL 0x00000400 +#define BRCMF_BTA_VAL 0x00000800 +#define BRCMF_FIL_VAL 0x00001000 +#define BRCMF_USB_VAL 0x00002000 +#define BRCMF_SCAN_VAL 0x00004000 +#define BRCMF_CONN_VAL 0x00008000 +#define BRCMF_CDC_VAL 0x00010000 /* set default print format */ #undef pr_fmt diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 682cb02a4674..a1ca6912ef28 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -459,7 +459,7 @@ static int brcmf_ethtool(struct brcmf_if *ifp, void __user *uaddr) sprintf(info.version, "%lu", drvr->drv_version); if (copy_to_user(uaddr, &info, sizeof(info))) return -EFAULT; - brcmf_dbg(CTL, "given %*s, returning %s\n", + brcmf_dbg(TRACE, "given %*s, returning %s\n", (int)sizeof(drvname), drvname, info.driver); break; -- cgit v1.2.3 From 7833b5799fb4dd201d6808c164712ea9d0c3dec0 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:45 +0100 Subject: brcmfmac: remove unused event related definitions The driver had some global definitions in dhd.h to map event identifiers to event names. With redesign of firmware event processing this has all moved to fweh module so these definitions can be removed. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 4937bf4d5506..0388599f6be7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -520,11 +520,6 @@ struct brcmf_pub { #endif }; -struct bcmevent_name { - uint event; - const char *name; -}; - struct brcmf_if_event { u8 ifidx; u8 action; @@ -564,8 +559,6 @@ static inline s32 brcmf_ndev_bssidx(struct net_device *ndev) return ifp->bssidx; } -extern const struct bcmevent_name bcmevent_names[]; - extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev); /* Return pointer to interface name */ -- cgit v1.2.3 From 12b33dacb4bb3780512d3c6a4d064d9ed1172c0e Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:46 +0100 Subject: brcmfmac: cleanup netdev transmit callback The header of the ethernet packet is processed conditionally, but the check is wrong as it checks skb length is at least ETH_ALEN. It should check it is at least sizeof struct ethhdr instead. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index a1ca6912ef28..9ca74118e131 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -165,6 +165,7 @@ static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev) int ret; struct brcmf_if *ifp = netdev_priv(ndev); struct brcmf_pub *drvr = ifp->drvr; + struct ethhdr *eh; brcmf_dbg(TRACE, "Enter\n"); @@ -202,17 +203,20 @@ static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev) } } - /* Update multicast statistic */ - if (skb->len >= ETH_ALEN) { - u8 *pktdata = (u8 *)(skb->data); - struct ethhdr *eh = (struct ethhdr *)pktdata; - - if (is_multicast_ether_addr(eh->h_dest)) - drvr->tx_multicast++; - if (ntohs(eh->h_proto) == ETH_P_PAE) - atomic_inc(&drvr->pend_8021x_cnt); + /* validate length for ether packet */ + if (skb->len < sizeof(*eh)) { + ret = -EINVAL; + dev_kfree_skb(skb); + goto done; } + /* handle ethernet header */ + eh = (struct ethhdr *)(skb->data); + if (is_multicast_ether_addr(eh->h_dest)) + drvr->tx_multicast++; + if (ntohs(eh->h_proto) == ETH_P_PAE) + atomic_inc(&drvr->pend_8021x_cnt); + /* If the protocol uses a data header, apply it */ brcmf_proto_hdrpush(drvr, ifp->idx, skb); -- cgit v1.2.3 From b84e3112ecc73482a7e07cd88bf2feaa60e42634 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 2 Jan 2013 15:22:47 +0100 Subject: brcmfmac: remove unnecessary curly braces in dhd_attach() Stumbled into a curly braces used for if statement with only one conditional statement. Removing them. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 9ca74118e131..285a70ee9350 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -890,9 +890,8 @@ void brcmf_detach(struct device *dev) brcmf_bus_detach(drvr); - if (drvr->prot) { + if (drvr->prot) brcmf_proto_detach(drvr); - } brcmf_debugfs_detach(drvr); bus_if->drvr = NULL; -- cgit v1.2.3 From 03abad08bb837650feb2bd7581ef14c8a1c51964 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:48 +0100 Subject: brcmfmac: Remove unused caching dongle error. CDC errors are retained. However, it is never used so it can be removed. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 3 --- drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 22 ++-------------------- 2 files changed, 2 insertions(+), 23 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 0388599f6be7..bbefaf38b4df 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -496,9 +496,6 @@ struct brcmf_pub { /* Last error return */ int bcmerror; - /* Last error from dongle */ - int dongle_error; - /* Suspend disable flag flag */ int suspend_disable_flag; /* "1" to disable all extra powersaving during suspend */ diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index db3bc2e99902..4557709d9655 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -147,18 +147,6 @@ brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, brcmf_dbg(CDC, "Enter, cmd %d len %d\n", cmd, len); - /* Respond "bcmerror" and "bcmerrorstr" with local cache */ - if (cmd == BRCMF_C_GET_VAR && buf) { - if (!strcmp((char *)buf, "bcmerrorstr")) { - strncpy((char *)buf, "bcm_error", - BCME_STRLEN); - goto done; - } else if (!strcmp((char *)buf, "bcmerror")) { - *(int *)buf = drvr->dongle_error; - goto done; - } - } - memset(msg, 0, sizeof(struct brcmf_proto_cdc_dcmd)); msg->cmd = cpu_to_le32(cmd); @@ -207,11 +195,8 @@ retry: } /* Check the ERROR flag */ - if (flags & CDC_DCMD_ERROR) { + if (flags & CDC_DCMD_ERROR) ret = le32_to_cpu(msg->status); - /* Cache error from dongle */ - drvr->dongle_error = ret; - } done: return ret; @@ -258,11 +243,8 @@ int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd, } /* Check the ERROR flag */ - if (flags & CDC_DCMD_ERROR) { + if (flags & CDC_DCMD_ERROR) ret = le32_to_cpu(msg->status); - /* Cache error from dongle */ - drvr->dongle_error = ret; - } done: return ret; -- cgit v1.2.3 From 80fd2dbee00edcd19fb8c04a12dbeefc55533f2e Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:49 +0100 Subject: brcmfmac: Return correct error on netdev xmit. Netdev xmit routine brcfm_netdev_start_xmit was defined incorrectly and used wrong return codes. Always eat the packet and return ok. Remove drvr_up check since it is not relevant. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index 285a70ee9350..d655501305b0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -160,7 +160,8 @@ static void brcmf_netdev_set_multicast_list(struct net_device *ndev) schedule_work(&ifp->multicast_work); } -static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev) +static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb, + struct net_device *ndev) { int ret; struct brcmf_if *ifp = netdev_priv(ndev); @@ -169,20 +170,21 @@ static int brcmf_netdev_start_xmit(struct sk_buff *skb, struct net_device *ndev) brcmf_dbg(TRACE, "Enter\n"); - /* Reject if down */ - if (!drvr->bus_if->drvr_up || - (drvr->bus_if->state != BRCMF_BUS_DATA)) { - brcmf_err("xmit rejected drvup=%d state=%d\n", - drvr->bus_if->drvr_up, - drvr->bus_if->state); + /* Can the device send data? */ + if (drvr->bus_if->state != BRCMF_BUS_DATA) { + brcmf_err("xmit rejected state=%d\n", drvr->bus_if->state); netif_stop_queue(ndev); - return -ENODEV; + dev_kfree_skb(skb); + ret = -ENODEV; + goto done; } if (!drvr->iflist[ifp->idx]) { brcmf_err("bad ifidx %d\n", ifp->idx); netif_stop_queue(ndev); - return -ENODEV; + dev_kfree_skb(skb); + ret = -ENODEV; + goto done; } /* Make sure there's enough room for any header */ @@ -230,7 +232,7 @@ done: drvr->bus_if->dstats.tx_packets++; /* Return ok: we always eat the packet */ - return 0; + return NETDEV_TX_OK; } void brcmf_txflowblock(struct device *dev, bool state) -- cgit v1.2.3 From 88d1239a1b9713cd505314fe9a1031c775b3eb3c Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:50 +0100 Subject: brcmfmac: Removing obsolete variables and inline functions. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd.h | 24 ----------------------- drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 2 -- 2 files changed, 26 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index bbefaf38b4df..a2f32fb990fa 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -481,33 +481,14 @@ struct brcmf_pub { unsigned long drv_version; /* Version of dongle-resident driver */ u8 mac[ETH_ALEN]; /* MAC address obtained from dongle */ - /* Additional stats for the bus level */ - /* Multicast data packets sent to dongle */ unsigned long tx_multicast; - /* Packets flushed due to unscheduled sendup thread */ - unsigned long rx_flushed; - /* Number of times dpc scheduled by watchdog timer */ - unsigned long wd_dpc_sched; - - /* Number of flow control pkts recvd */ - unsigned long fc_packets; - - /* Last error return */ - int bcmerror; - - /* Suspend disable flag flag */ - int suspend_disable_flag; /* "1" to disable all extra powersaving - during suspend */ - int in_suspend; /* flag set to 1 when early suspend called */ - int dtim_skip; /* dtim skip , default 0 means wake each dtim */ struct brcmf_if *iflist[BRCMF_MAX_IFS]; struct mutex proto_block; unsigned char proto_buf[BRCMF_DCMD_MAXLEN]; - u8 macvalue[ETH_ALEN]; atomic_t pend_8021x_cnt; wait_queue_head_t pend_8021x_wait; @@ -550,11 +531,6 @@ struct brcmf_if { u8 mac_addr[ETH_ALEN]; }; -static inline s32 brcmf_ndev_bssidx(struct net_device *ndev) -{ - struct brcmf_if *ifp = netdev_priv(ndev); - return ifp->bssidx; -} extern int brcmf_netdev_wait_pend8021x(struct net_device *ndev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index 4557709d9655..bb454cdab29d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -92,8 +92,6 @@ struct brcmf_proto_bdc_header { struct brcmf_proto { u16 reqid; - u8 pending; - u32 lastcmd; u8 bus_header[BUS_HEADER_LEN]; struct brcmf_proto_cdc_dcmd msg; unsigned char buf[BRCMF_DCMD_MAXLEN + ROUND_UP_MARGIN]; -- cgit v1.2.3 From 40a23296854dded596fda33e0df4a7373229d75e Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 2 Jan 2013 15:22:51 +0100 Subject: brcmfmac: Update init code routines from interface up. On interface up dongle gets inialized. Move UP command to common routine and update these common init routines using ifp. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_linux.c | 9 ++----- .../net/wireless/brcm80211/brcmfmac/wl_cfg80211.c | 30 ++++++++++------------ 2 files changed, 15 insertions(+), 24 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index d655501305b0..e3326a58bdb1 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -585,14 +585,9 @@ static int brcmf_netdev_open(struct net_device *ndev) /* Get current TOE mode from dongle */ if (brcmf_fil_iovar_int_get(ifp, "toe_ol", &toe_ol) >= 0 && (toe_ol & TOE_TX_CSUM_OL) != 0) - drvr->iflist[ifp->idx]->ndev->features |= - NETIF_F_IP_CSUM; + ndev->features |= NETIF_F_IP_CSUM; else - drvr->iflist[ifp->idx]->ndev->features &= - ~NETIF_F_IP_CSUM; - - /* make sure RF is ready for work */ - brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0); + ndev->features &= ~NETIF_F_IP_CSUM; /* Allow transmit calls */ netif_start_queue(ndev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 1ec2d573abc2..730da84edb01 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -4265,9 +4265,8 @@ void brcmf_cfg80211_detach(struct brcmf_cfg80211_info *cfg) } static s32 -brcmf_dongle_roam(struct net_device *ndev, u32 roamvar, u32 bcn_timeout) +brcmf_dongle_roam(struct brcmf_if *ifp, u32 roamvar, u32 bcn_timeout) { - struct brcmf_if *ifp = netdev_priv(ndev); s32 err = 0; __le32 roamtrigger[2]; __le32 roam_delta[2]; @@ -4318,10 +4317,9 @@ dongle_rom_out: } static s32 -brcmf_dongle_scantime(struct net_device *ndev, s32 scan_assoc_time, +brcmf_dongle_scantime(struct brcmf_if *ifp, s32 scan_assoc_time, s32 scan_unassoc_time, s32 scan_passive_time) { - struct brcmf_if *ifp = netdev_priv(ndev); s32 err = 0; err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME, @@ -4391,6 +4389,7 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) { struct net_device *ndev; struct wireless_dev *wdev; + struct brcmf_if *ifp; s32 power_mode; s32 err = 0; @@ -4399,35 +4398,34 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg) ndev = cfg_to_ndev(cfg); wdev = ndev->ieee80211_ptr; + ifp = netdev_priv(ndev); + + /* make sure RF is ready for work */ + brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0); - brcmf_dongle_scantime(ndev, WL_SCAN_CHANNEL_TIME, - WL_SCAN_UNASSOC_TIME, WL_SCAN_PASSIVE_TIME); + brcmf_dongle_scantime(ifp, WL_SCAN_CHANNEL_TIME, + WL_SCAN_UNASSOC_TIME, WL_SCAN_PASSIVE_TIME); power_mode = cfg->pwr_save ? PM_FAST : PM_OFF; - err = brcmf_fil_cmd_int_set(netdev_priv(ndev), BRCMF_C_SET_PM, - power_mode); + err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, power_mode); if (err) goto default_conf_out; brcmf_dbg(INFO, "power save set to %s\n", (power_mode ? "enabled" : "disabled")); - err = brcmf_dongle_roam(ndev, (cfg->roam_on ? 0 : 1), - WL_BEACON_TIMEOUT); + err = brcmf_dongle_roam(ifp, (cfg->roam_on ? 0 : 1), WL_BEACON_TIMEOUT); if (err) goto default_conf_out; err = brcmf_cfg80211_change_iface(wdev->wiphy, ndev, wdev->iftype, NULL, NULL); - if (err && err != -EINPROGRESS) + if (err) goto default_conf_out; err = brcmf_dongle_probecap(cfg); if (err) goto default_conf_out; - /* -EINPROGRESS: Call commit handler */ - -default_conf_out: - cfg->dongle_up = true; +default_conf_out: return err; @@ -4436,8 +4434,6 @@ default_conf_out: static s32 __brcmf_cfg80211_up(struct brcmf_if *ifp) { set_bit(BRCMF_VIF_STATUS_READY, &ifp->vif->sme_state); - if (ifp->idx) - return 0; return brcmf_config_dongle(ifp->drvr->config); } -- cgit v1.2.3 From 6960af6dce1f0b2d9d1b4ddf75952d54e633b923 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Thu, 3 Jan 2013 00:06:47 +0400 Subject: p54pci: don't return zero on failure paths in p54p_probe() If pci_set_dma_mask() or pci_set_consistent_dma_mask() fails in p54p_probe(), it breaks off initialization, deallocates all resources, but returns zero. Similar issue is if check for returned value of pci_resource_len() fails. The patch implements proper error code propagation. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Acked-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54pci.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 933e5d941937..57e3af8ebb4b 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -559,6 +559,7 @@ static int p54p_probe(struct pci_dev *pdev, mem_len = pci_resource_len(pdev, 0); if (mem_len < sizeof(struct p54p_csr)) { dev_err(&pdev->dev, "Too short PCI resources\n"); + err = -ENODEV; goto err_disable_dev; } @@ -568,8 +569,10 @@ static int p54p_probe(struct pci_dev *pdev, goto err_disable_dev; } - if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) || - pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (!err) + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err) { dev_err(&pdev->dev, "No suitable DMA available\n"); goto err_free_reg; } -- cgit v1.2.3 From fc40ca92344a4e4a45bf916cf067e92085b881ea Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 2 Jan 2013 16:23:01 -0800 Subject: wireless: mwifiex: remove unreachable paths We know 'firmware' is non-NULL from the beginning of mwifiex_prog_fw_w_helper, remove all !firmware paths from the rest of the function. Signed-off-by: Sasha Levin Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/usb.c | 30 +++--------------------------- 1 file changed, 3 insertions(+), 27 deletions(-) diff --git a/drivers/net/wireless/mwifiex/usb.c b/drivers/net/wireless/mwifiex/usb.c index 63ac9f2d11ae..5d4a10a8a005 100644 --- a/drivers/net/wireless/mwifiex/usb.c +++ b/drivers/net/wireless/mwifiex/usb.c @@ -786,21 +786,6 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) return 0; } -/* This function reads one block of firmware data. */ -static int mwifiex_get_fw_data(struct mwifiex_adapter *adapter, - u32 offset, u32 len, u8 *buf) -{ - if (!buf || !len) - return -1; - - if (offset + len > adapter->firmware->size) - return -1; - - memcpy(buf, adapter->firmware->data + offset, len); - - return 0; -} - static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, struct mwifiex_fw_image *fw) { @@ -836,23 +821,14 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, dlen = 0; } else { /* copy the header of the fw_data to get the length */ - if (firmware) - memcpy(&fwdata->fw_hdr, &firmware[tlen], - sizeof(struct fw_header)); - else - mwifiex_get_fw_data(adapter, tlen, - sizeof(struct fw_header), - (u8 *)&fwdata->fw_hdr); + memcpy(&fwdata->fw_hdr, &firmware[tlen], + sizeof(struct fw_header)); dlen = le32_to_cpu(fwdata->fw_hdr.data_len); dnld_cmd = le32_to_cpu(fwdata->fw_hdr.dnld_cmd); tlen += sizeof(struct fw_header); - if (firmware) - memcpy(fwdata->data, &firmware[tlen], dlen); - else - mwifiex_get_fw_data(adapter, tlen, dlen, - (u8 *)fwdata->data); + memcpy(fwdata->data, &firmware[tlen], dlen); fwdata->seq_num = cpu_to_le32(fw_seqnum); tlen += dlen; -- cgit v1.2.3 From d35f1035b53e92167a8231e15121dd10f4aa8edd Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Wed, 2 Jan 2013 16:56:00 -0800 Subject: mwifiex: use correct htcapinfo for HT20 ibss network It is observed that same htcapinfo ie is included in beacon for HT20, HT40+ and HT40- ibss networks. This patch makes sure that we will not advertise 40Mhz flags while creating/joining ibss network in HT20 mode. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/11n.c | 4 +++- drivers/net/wireless/mwifiex/join.c | 10 ++++++++++ 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/11n.c b/drivers/net/wireless/mwifiex/11n.c index 245a371f1a43..9cd6216c61e6 100644 --- a/drivers/net/wireless/mwifiex/11n.c +++ b/drivers/net/wireless/mwifiex/11n.c @@ -53,7 +53,9 @@ mwifiex_fill_cap_info(struct mwifiex_private *priv, u8 radio_type, sizeof(sband->ht_cap.mcs)); if (priv->bss_mode == NL80211_IFTYPE_STATION || - sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) + (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 && + (priv->adapter->sec_chan_offset != + IEEE80211_HT_PARAM_CHA_SEC_NONE))) /* Set MCS32 for infra mode or ad-hoc mode with 40MHz support */ SETHT_MCS32(ht_cap->ht_cap.mcs.rx_mask); diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 88664ae667ba..3c7cabeddf76 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -969,6 +969,16 @@ mwifiex_cmd_802_11_ad_hoc_start(struct mwifiex_private *priv, priv->adapter->config_bands); mwifiex_fill_cap_info(priv, radio_type, ht_cap); + if (adapter->sec_chan_offset == + IEEE80211_HT_PARAM_CHA_SEC_NONE) { + u16 tmp_ht_cap; + + tmp_ht_cap = le16_to_cpu(ht_cap->ht_cap.cap_info); + tmp_ht_cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + tmp_ht_cap &= ~IEEE80211_HT_CAP_SGI_40; + ht_cap->ht_cap.cap_info = cpu_to_le16(tmp_ht_cap); + } + pos += sizeof(struct mwifiex_ie_types_htcap); cmd_append_size += sizeof(struct mwifiex_ie_types_htcap); -- cgit v1.2.3 From 54428c57b6d7a9dc172ecfa80b07f17431015d09 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Wed, 2 Jan 2013 16:56:01 -0800 Subject: mwifiex: parse WMM IEs from hostapd for mwifiex AP This patch adds support for parsing WMM IEs from hostapd and setting them to FW via sys configure command. Patch also sets wiphy flag to advertise AP uAPSD support. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 2 ++ drivers/net/wireless/mwifiex/decl.h | 18 ++++++++++++++ drivers/net/wireless/mwifiex/fw.h | 11 ++++----- drivers/net/wireless/mwifiex/ioctl.h | 3 ++- drivers/net/wireless/mwifiex/main.h | 4 +++ drivers/net/wireless/mwifiex/uap_cmd.c | 44 +++++++++++++++++++++++++++++++++ 6 files changed, 75 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a875499f8945..c4edb28cce08 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1327,6 +1327,7 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy, } mwifiex_set_ht_params(priv, bss_cfg, params); + mwifiex_set_wmm_params(priv, bss_cfg, params); if (params->inactivity_timeout > 0) { /* sta_ao_timer/ps_sta_ao_timer is in unit of 100ms */ @@ -2261,6 +2262,7 @@ int mwifiex_register_cfg80211(struct mwifiex_adapter *adapter) wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; wiphy->flags |= WIPHY_FLAG_HAVE_AP_SME | WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD | + WIPHY_FLAG_AP_UAPSD | WIPHY_FLAG_CUSTOM_REGULATORY | WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; diff --git a/drivers/net/wireless/mwifiex/decl.h b/drivers/net/wireless/mwifiex/decl.h index e9357d87d327..e8a569aaa2e8 100644 --- a/drivers/net/wireless/mwifiex/decl.h +++ b/drivers/net/wireless/mwifiex/decl.h @@ -26,6 +26,7 @@ #include #include #include +#include #define MWIFIEX_MAX_BSS_NUM (3) @@ -58,6 +59,8 @@ #define MWIFIEX_RTS_MAX_VALUE (2347) #define MWIFIEX_FRAG_MIN_VALUE (256) #define MWIFIEX_FRAG_MAX_VALUE (2346) +#define MWIFIEX_WMM_VERSION 0x01 +#define MWIFIEX_WMM_SUBTYPE 0x01 #define MWIFIEX_RETRY_LIMIT 14 #define MWIFIEX_SDIO_BLOCK_SIZE 256 @@ -126,4 +129,19 @@ enum mwifiex_wmm_ac_e { WMM_AC_VI, WMM_AC_VO } __packed; + +struct ieee_types_wmm_ac_parameters { + u8 aci_aifsn_bitmap; + u8 ecw_bitmap; + __le16 tx_op_limit; +} __packed; + +struct mwifiex_types_wmm_info { + u8 oui[4]; + u8 subtype; + u8 version; + u8 qos_info; + u8 reserved; + struct ieee_types_wmm_ac_parameters ac_params[IEEE80211_NUM_ACS]; +} __packed; #endif /* !_MWIFIEX_DECL_H_ */ diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h index 4dc8e2e9a889..41c85dd78084 100644 --- a/drivers/net/wireless/mwifiex/fw.h +++ b/drivers/net/wireless/mwifiex/fw.h @@ -1131,12 +1131,6 @@ struct ieee_types_vendor_header { u8 version; } __packed; -struct ieee_types_wmm_ac_parameters { - u8 aci_aifsn_bitmap; - u8 ecw_bitmap; - __le16 tx_op_limit; -} __packed; - struct ieee_types_wmm_parameter { /* * WMM Parameter IE - Vendor Specific Header: @@ -1186,6 +1180,11 @@ struct mwifiex_ie_types_htcap { struct ieee80211_ht_cap ht_cap; } __packed; +struct mwifiex_ie_types_wmmcap { + struct mwifiex_ie_types_header header; + struct mwifiex_types_wmm_info wmm_info; +} __packed; + struct mwifiex_ie_types_htinfo { struct mwifiex_ie_types_header header; struct ieee80211_ht_operation ht_oper; diff --git a/drivers/net/wireless/mwifiex/ioctl.h b/drivers/net/wireless/mwifiex/ioctl.h index 4e31c6013ebe..6095b3e53f4e 100644 --- a/drivers/net/wireless/mwifiex/ioctl.h +++ b/drivers/net/wireless/mwifiex/ioctl.h @@ -20,7 +20,6 @@ #ifndef _MWIFIEX_IOCTL_H_ #define _MWIFIEX_IOCTL_H_ -#include #include enum { @@ -107,6 +106,8 @@ struct mwifiex_uap_bss_param { u8 rates[MWIFIEX_SUPPORTED_RATES]; u32 sta_ao_timer; u32 ps_sta_ao_timer; + u8 qos_info; + struct mwifiex_types_wmm_info wmm_info; }; enum { diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index 1b3cfc821940..d717c9859fb9 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -890,6 +890,10 @@ void mwifiex_set_ht_params(struct mwifiex_private *priv, struct cfg80211_ap_settings *params); void mwifiex_set_uap_rates(struct mwifiex_uap_bss_param *bss_cfg, struct cfg80211_ap_settings *params); +void +mwifiex_set_wmm_params(struct mwifiex_private *priv, + struct mwifiex_uap_bss_param *bss_cfg, + struct cfg80211_ap_settings *params); /* * This function checks if the queuing is RA based or not. diff --git a/drivers/net/wireless/mwifiex/uap_cmd.c b/drivers/net/wireless/mwifiex/uap_cmd.c index 8dd72240f162..6e76a15a8950 100644 --- a/drivers/net/wireless/mwifiex/uap_cmd.c +++ b/drivers/net/wireless/mwifiex/uap_cmd.c @@ -219,6 +219,7 @@ void mwifiex_set_sys_config_invalid_data(struct mwifiex_uap_bss_param *config) config->rts_threshold = 0x7FFF; config->frag_threshold = 0x7FFF; config->retry_limit = 0x7F; + config->qos_info = 0xFF; } /* This function parses BSS related parameters from structure @@ -297,6 +298,38 @@ mwifiex_uap_bss_wpa(u8 **tlv_buf, void *cmd_buf, u16 *param_size) return; } +/* This function parses WMM related parameters from cfg80211_ap_settings + * structure and updates bss_config structure. + */ +void +mwifiex_set_wmm_params(struct mwifiex_private *priv, + struct mwifiex_uap_bss_param *bss_cfg, + struct cfg80211_ap_settings *params) +{ + const u8 *vendor_ie; + struct ieee_types_header *wmm_ie; + u8 wmm_oui[] = {0x00, 0x50, 0xf2, 0x02}; + + vendor_ie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT, + WLAN_OUI_TYPE_MICROSOFT_WMM, + params->beacon.tail, + params->beacon.tail_len); + if (vendor_ie) { + wmm_ie = (struct ieee_types_header *)vendor_ie; + memcpy(&bss_cfg->wmm_info, wmm_ie + 1, + sizeof(bss_cfg->wmm_info)); + priv->wmm_enabled = 1; + } else { + memset(&bss_cfg->wmm_info, 0, sizeof(bss_cfg->wmm_info)); + memcpy(&bss_cfg->wmm_info.oui, wmm_oui, sizeof(wmm_oui)); + bss_cfg->wmm_info.subtype = MWIFIEX_WMM_SUBTYPE; + bss_cfg->wmm_info.version = MWIFIEX_WMM_VERSION; + priv->wmm_enabled = 0; + } + + bss_cfg->qos_info = 0x00; + return; +} /* This function parses BSS related parameters from structure * and prepares TLVs specific to WEP encryption. * These TLVs are appended to command buffer. @@ -354,6 +387,7 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size) struct host_cmd_tlv_rates *tlv_rates; struct host_cmd_tlv_ageout_timer *ao_timer, *ps_ao_timer; struct mwifiex_ie_types_htcap *htcap; + struct mwifiex_ie_types_wmmcap *wmm_cap; struct mwifiex_uap_bss_param *bss_cfg = cmd_buf; int i; u16 cmd_size = *param_size; @@ -507,6 +541,16 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size) tlv += sizeof(struct mwifiex_ie_types_htcap); } + if (bss_cfg->wmm_info.qos_info != 0xFF) { + wmm_cap = (struct mwifiex_ie_types_wmmcap *)tlv; + wmm_cap->header.type = cpu_to_le16(WLAN_EID_VENDOR_SPECIFIC); + wmm_cap->header.len = cpu_to_le16(sizeof(wmm_cap->wmm_info)); + memcpy(&wmm_cap->wmm_info, &bss_cfg->wmm_info, + sizeof(wmm_cap->wmm_info)); + cmd_size += sizeof(struct mwifiex_ie_types_wmmcap); + tlv += sizeof(struct mwifiex_ie_types_wmmcap); + } + if (bss_cfg->sta_ao_timer) { ao_timer = (struct host_cmd_tlv_ageout_timer *)tlv; ao_timer->tlv.type = cpu_to_le16(TLV_TYPE_UAP_AO_TIMER); -- cgit v1.2.3 From b686929c544be6d2d30b82dfb7a61a7766885177 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 3 Jan 2013 12:21:21 +0530 Subject: ath9k_hw: Enable calibration types in init_cal_settings Doing this in ath9k_hw_fill_cap_info() is odd and it's cleaner to do this in the init function for calibration. Also, setup the supported calibration type in init_cal_settings. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 17 +++++++++++------ drivers/net/wireless/ath/ath9k/hw.c | 7 ------- 2 files changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 8b0d8dcd7625..598b847e4e5a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -323,6 +323,14 @@ static const struct ath9k_percal_data iq_cal_single_sample = { static void ar9003_hw_init_cal_settings(struct ath_hw *ah) { ah->iq_caldata.calData = &iq_cal_single_sample; + + if (AR_SREV_9300_20_OR_LATER(ah)) { + ah->enabled_cals |= TX_IQ_CAL; + if (AR_SREV_9485_OR_LATER(ah)) + ah->enabled_cals |= TX_IQ_ON_AGC_CAL; + } + + ah->supp_cals = IQ_MISMATCH_CAL; } /* @@ -1131,13 +1139,10 @@ skip_tx_iqcal: /* Initialize list pointers */ ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL; - ah->supp_cals = IQ_MISMATCH_CAL; - if (ah->supp_cals & IQ_MISMATCH_CAL) { - INIT_CAL(&ah->iq_caldata); - INSERT_CAL(ah, &ah->iq_caldata); - ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n"); - } + INIT_CAL(&ah->iq_caldata); + INSERT_CAL(ah, &ah->iq_caldata); + ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n"); if (ah->supp_cals & TEMP_COMP_CAL) { INIT_CAL(&ah->tempCompCalData); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index ecf1c08a03c1..caf0626eeaa5 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2568,12 +2568,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) rx_chainmask >>= 1; } - if (AR_SREV_9300_20_OR_LATER(ah)) { - ah->enabled_cals |= TX_IQ_CAL; - if (AR_SREV_9485_OR_LATER(ah)) - ah->enabled_cals |= TX_IQ_ON_AGC_CAL; - } - if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) { if (!(ah->ent_mode & AR_ENT_OTP_49GHZ_DISABLE)) pCap->hw_caps |= ATH9K_HW_CAP_MCI; @@ -2582,7 +2576,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->hw_caps |= ATH9K_HW_CAP_RTT; } - if (AR_SREV_9280_20_OR_LATER(ah)) { pCap->hw_caps |= ATH9K_HW_WOW_DEVICE_CAPABLE | ATH9K_HW_WOW_PATTERN_MATCH_EXACT; -- cgit v1.2.3 From 1a6e5d7c96c247ee0d9f446248679cac1bd65dd1 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 3 Jan 2013 12:21:23 +0530 Subject: ath9k_hw: Remove TEMP_COMP_CAL This is not enabled for any chip and is unused. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 20 +++----------------- drivers/net/wireless/ath/ath9k/hw.h | 1 - 2 files changed, 3 insertions(+), 18 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 598b847e4e5a..a562a5d47eab 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -32,7 +32,6 @@ struct coeff { enum ar9003_cal_types { IQ_MISMATCH_CAL = BIT(0), - TEMP_COMP_CAL = BIT(1), }; static void ar9003_hw_setup_calibration(struct ath_hw *ah, @@ -49,7 +48,7 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah, */ REG_RMW_FIELD(ah, AR_PHY_TIMING4, AR_PHY_TIMING4_IQCAL_LOG_COUNT_MAX, - currCal->calData->calCountMax); + currCal->calData->calCountMax); REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ); ath_dbg(common, CALIBRATE, @@ -58,14 +57,8 @@ static void ar9003_hw_setup_calibration(struct ath_hw *ah, /* Kick-off cal */ REG_SET_BIT(ah, AR_PHY_TIMING4, AR_PHY_TIMING4_DO_CAL); break; - case TEMP_COMP_CAL: - REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM, - AR_PHY_65NM_CH0_THERM_LOCAL, 1); - REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_THERM, - AR_PHY_65NM_CH0_THERM_START, 1); - - ath_dbg(common, CALIBRATE, - "starting Temperature Compensation Calibration\n"); + default: + ath_err(common, "Invalid calibration type\n"); break; } } @@ -1144,13 +1137,6 @@ skip_tx_iqcal: INSERT_CAL(ah, &ah->iq_caldata); ath_dbg(common, CALIBRATE, "enabling IQ Calibration\n"); - if (ah->supp_cals & TEMP_COMP_CAL) { - INIT_CAL(&ah->tempCompCalData); - INSERT_CAL(ah, &ah->tempCompCalData); - ath_dbg(common, CALIBRATE, - "enabling Temperature Compensation Calibration\n"); - } - /* Initialize current pointer to first element in list */ ah->cal_list_curr = ah->cal_list; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index d2b5229474b6..38c5a8702fb2 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -768,7 +768,6 @@ struct ath_hw { struct ath9k_cal_list iq_caldata; struct ath9k_cal_list adcgain_caldata; struct ath9k_cal_list adcdc_caldata; - struct ath9k_cal_list tempCompCalData; struct ath9k_cal_list *cal_list; struct ath9k_cal_list *cal_list_last; struct ath9k_cal_list *cal_list_curr; -- cgit v1.2.3 From 96769caf8a755c9767b1a5c56fe71e062c2ad7da Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:20:47 +0530 Subject: mwl8k: Remove redundant txq_idx Ampdu stream index can be derived from stream->idx. So we no longer need stream->txq_idx, hence removing it. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 19b46fdf9f0f..a13f690f1851 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -160,7 +160,6 @@ struct mwl8k_ampdu_stream { u8 tid; u8 state; u8 idx; - u8 txq_idx; /* index of this stream in priv->txq */ }; struct mwl8k_priv { @@ -1741,7 +1740,6 @@ mwl8k_add_stream(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u8 tid) stream->state = AMPDU_STREAM_NEW; stream->tid = tid; stream->idx = i; - stream->txq_idx = MWL8K_TX_WMM_QUEUES + i; wiphy_debug(hw->wiphy, "Added a new stream for %pM %d", sta->addr, tid); return stream; @@ -1928,8 +1926,8 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, stream = mwl8k_lookup_stream(hw, sta->addr, tid); if (stream != NULL) { if (stream->state == AMPDU_STREAM_ACTIVE) { - txpriority = stream->txq_idx; - index = stream->txq_idx; + txpriority = stream->idx + MWL8K_TX_WMM_QUEUES; + index = stream->idx + MWL8K_TX_WMM_QUEUES; } else if (stream->state == AMPDU_STREAM_NEW) { /* We get here if the driver sends us packets * after we've initiated a stream, but before -- cgit v1.2.3 From 5f2a14940db23350612071a3c906c8960e3ceb9a Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:21:25 +0530 Subject: mwl8k: set ack policy to normal Set ACK policy to NORMAL when its not going to be an AMPDU packet. Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index a13f690f1851..7df18faae1b6 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1926,6 +1926,7 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, stream = mwl8k_lookup_stream(hw, sta->addr, tid); if (stream != NULL) { if (stream->state == AMPDU_STREAM_ACTIVE) { + WARN_ON(!(qos & MWL8K_QOS_ACK_POLICY_BLOCKACK)); txpriority = stream->idx + MWL8K_TX_WMM_QUEUES; index = stream->idx + MWL8K_TX_WMM_QUEUES; } else if (stream->state == AMPDU_STREAM_NEW) { @@ -1969,6 +1970,9 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, } } spin_unlock(&priv->stream_lock); + } else { + qos &= ~MWL8K_QOS_ACK_POLICY_MASK; + qos |= MWL8K_QOS_ACK_POLICY_NORMAL; } dma = pci_map_single(priv->pdev, skb->data, -- cgit v1.2.3 From 7fb978b7e93b5c4a378eba5767c7513540b56642 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:22:56 +0530 Subject: mwl8k: Enable support to support additional ampdu streams Currently, we have 2 ampdu streams that can be created simultaneously. Firmware is capable of supporting additional streams. Add support to use these streams. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 31 +++++++++++++++++++++++++++---- 1 file changed, 27 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 7df18faae1b6..9e08fc601bb4 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -101,6 +101,18 @@ MODULE_PARM_DESC(ap_mode_default, #define MWL8K_MAX_TX_QUEUES (MWL8K_TX_WMM_QUEUES + MWL8K_MAX_AMPDU_QUEUES) #define mwl8k_tx_queues(priv) (MWL8K_TX_WMM_QUEUES + (priv)->num_ampdu_queues) +/* txpriorities are mapped with hw queues. + * Each hw queue has a txpriority. + */ +#define TOTAL_HW_TX_QUEUES 8 + +/* Each HW queue can have one AMPDU stream. + * But, because one of the hw queue is reserved, + * maximum AMPDU queues that can be created are + * one short of total tx queues. + */ +#define MWL8K_NUM_AMPDU_STREAMS (TOTAL_HW_TX_QUEUES - 1) + struct rxd_ops { int rxd_size; void (*rxd_init)(void *rxd, dma_addr_t next_dma_addr); @@ -1733,7 +1745,7 @@ mwl8k_add_stream(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u8 tid) struct mwl8k_priv *priv = hw->priv; int i; - for (i = 0; i < priv->num_ampdu_queues; i++) { + for (i = 0; i < MWL8K_NUM_AMPDU_STREAMS; i++) { stream = &priv->ampdu[i]; if (stream->state == AMPDU_NO_STREAM) { stream->sta = sta; @@ -1780,7 +1792,7 @@ mwl8k_lookup_stream(struct ieee80211_hw *hw, u8 *addr, u8 tid) struct mwl8k_priv *priv = hw->priv; int i; - for (i = 0 ; i < priv->num_ampdu_queues; i++) { + for (i = 0; i < MWL8K_NUM_AMPDU_STREAMS; i++) { struct mwl8k_ampdu_stream *stream; stream = &priv->ampdu[i]; if (stream->state == AMPDU_NO_STREAM) @@ -1827,6 +1839,13 @@ static inline void mwl8k_tx_count_packet(struct ieee80211_sta *sta, u8 tid) tx_stats->pkts++; } +/* The hardware ampdu queues start from 5. + * txpriorities for ampdu queues are + * 5 6 7 0 1 2 3 4 ie., queue 5 is highest + * and queue 3 is lowest (queue 4 is reserved) + */ +#define BA_QUEUE 5 + static void mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, @@ -1927,8 +1946,12 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, if (stream != NULL) { if (stream->state == AMPDU_STREAM_ACTIVE) { WARN_ON(!(qos & MWL8K_QOS_ACK_POLICY_BLOCKACK)); - txpriority = stream->idx + MWL8K_TX_WMM_QUEUES; - index = stream->idx + MWL8K_TX_WMM_QUEUES; + txpriority = (BA_QUEUE + stream->idx) % + TOTAL_HW_TX_QUEUES; + if (stream->idx <= 1) + index = stream->idx + + MWL8K_TX_WMM_QUEUES; + } else if (stream->state == AMPDU_STREAM_NEW) { /* We get here if the driver sends us packets * after we've initiated a stream, but before -- cgit v1.2.3 From 07f6dda1e7ed653c87ed329c99d6ae12ee114d52 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:23:33 +0530 Subject: mwl8k: changing mwl8k_destroy_ba prototype Currently, mwl8k_ampdu_stream is passed as one of the argument to the function mwl8k_destroy_ba. Instead of this pass only the stream index. This will be helpful during watchdog event handling when bitmap of stream indices are received. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 9e08fc601bb4..76b2f9133159 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3788,7 +3788,7 @@ mwl8k_create_ba(struct ieee80211_hw *hw, struct mwl8k_ampdu_stream *stream, } static void mwl8k_destroy_ba(struct ieee80211_hw *hw, - struct mwl8k_ampdu_stream *stream) + u8 idx) { struct mwl8k_cmd_bastream *cmd; @@ -3800,10 +3800,10 @@ static void mwl8k_destroy_ba(struct ieee80211_hw *hw, cmd->header.length = cpu_to_le16(sizeof(*cmd)); cmd->action = cpu_to_le32(MWL8K_BA_DESTROY); - cmd->destroy_params.ba_context = cpu_to_le32(stream->idx); + cmd->destroy_params.ba_context = cpu_to_le32(idx); mwl8k_post_cmd(hw, &cmd->header); - wiphy_debug(hw->wiphy, "Deleted BA stream index %d\n", stream->idx); + wiphy_debug(hw->wiphy, "Deleted BA stream index %d\n", idx); kfree(cmd); } @@ -5117,7 +5117,7 @@ mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, int i, rc = 0; struct mwl8k_priv *priv = hw->priv; struct mwl8k_ampdu_stream *stream; - u8 *addr = sta->addr; + u8 *addr = sta->addr, idx; struct mwl8k_sta *sta_info = MWL8K_STA(sta); if (!(hw->flags & IEEE80211_HW_AMPDU_AGGREGATION)) @@ -5200,8 +5200,9 @@ mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: if (stream) { if (stream->state == AMPDU_STREAM_ACTIVE) { + idx = stream->idx; spin_unlock(&priv->stream_lock); - mwl8k_destroy_ba(hw, stream); + mwl8k_destroy_ba(hw, idx); spin_lock(&priv->stream_lock); } mwl8k_remove_stream(hw, stream); @@ -5217,8 +5218,9 @@ mwl8k_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif, if (!rc) stream->state = AMPDU_STREAM_ACTIVE; else { + idx = stream->idx; spin_unlock(&priv->stream_lock); - mwl8k_destroy_ba(hw, stream); + mwl8k_destroy_ba(hw, idx); spin_lock(&priv->stream_lock); wiphy_debug(hw->wiphy, "Failed adding stream for sta %pM tid %d\n", -- cgit v1.2.3 From cfacba12f573abd04a202e3e86c09f246339071f Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:24:03 +0530 Subject: mwl8k: Handle Watchdog events for the new ampdu streams With more ampdu streams, we need to handle watchdog events for the new ampdu streams. Handle these events appropriately. Earlier mwl8k_cmd_get_watchdog_bitmap used to return only one stream index and hence bitwise operations on the return value were not required. Now the function returns a bitmap with different bits are mapped with different stream indices. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 44 ++++++++++++++++++++++++++++++++------------ 1 file changed, 32 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 76b2f9133159..19afd2cdaced 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3603,7 +3603,11 @@ static int mwl8k_cmd_get_watchdog_bitmap(struct ieee80211_hw *hw, u8 *bitmap) return rc; } -#define INVALID_BA 0xAA +#define MWL8K_WMM_QUEUE_NUMBER 3 + +static void mwl8k_destroy_ba(struct ieee80211_hw *hw, + u8 idx); + static void mwl8k_watchdog_ba_events(struct work_struct *work) { int rc; @@ -3611,24 +3615,40 @@ static void mwl8k_watchdog_ba_events(struct work_struct *work) struct mwl8k_ampdu_stream *streams; struct mwl8k_priv *priv = container_of(work, struct mwl8k_priv, watchdog_ba_handle); + struct ieee80211_hw *hw = priv->hw; + int i; + u32 status = 0; + + mwl8k_fw_lock(hw); rc = mwl8k_cmd_get_watchdog_bitmap(priv->hw, &bitmap); if (rc) - return; + goto done; - if (bitmap == INVALID_BA) - return; + spin_lock(&priv->stream_lock); /* the bitmap is the hw queue number. Map it to the ampdu queue. */ - stream_index = bitmap - MWL8K_TX_WMM_QUEUES; - - BUG_ON(stream_index >= priv->num_ampdu_queues); - - streams = &priv->ampdu[stream_index]; - - if (streams->state == AMPDU_STREAM_ACTIVE) - ieee80211_stop_tx_ba_session(streams->sta, streams->tid); + for (i = 0; i < TOTAL_HW_TX_QUEUES; i++) { + if (bitmap & (1 << i)) { + stream_index = (i + MWL8K_WMM_QUEUE_NUMBER) % + TOTAL_HW_TX_QUEUES; + streams = &priv->ampdu[stream_index]; + if (streams->state == AMPDU_STREAM_ACTIVE) { + ieee80211_stop_tx_ba_session(streams->sta, + streams->tid); + spin_unlock(&priv->stream_lock); + mwl8k_destroy_ba(hw, stream_index); + spin_lock(&priv->stream_lock); + } + } + } + spin_unlock(&priv->stream_lock); +done: + status = ioread32(priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); + iowrite32((status | MWL8K_A2H_INT_BA_WATCHDOG), + priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); + mwl8k_fw_unlock(hw); return; } -- cgit v1.2.3 From c27a54d3f12383789b57a404649daf98a05cbd72 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:24:19 +0530 Subject: mwl8k: Handle watchdog event with highest prioriry Currently, command path waits till all the tx host queues are empty. Whenever watchdog event is raised, firmware expects driver to destroy ampdu queues immediately. This requires corresponding commands i.e. mwl8k_cmd_get_watchdog_bitmap and mwl8k_destroy_ba to be sent without waiting for the tx queues to be completely empty. Use "watchdog_event_pending" to ensure the above mentioned two commands are sent down immediately. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 19afd2cdaced..3b046cc81cdd 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -213,6 +213,8 @@ struct mwl8k_priv { int fw_mutex_depth; struct completion *hostcmd_wait; + atomic_t watchdog_event_pending; + /* lock held over TX and TX reap */ spinlock_t tx_lock; @@ -1527,6 +1529,9 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) return -EBUSY; } + if (atomic_read(&priv->watchdog_event_pending)) + return 0; + /* * The TX queues are stopped at this point, so this test * doesn't need to take ->tx_lock. @@ -1548,6 +1553,14 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) spin_unlock_bh(&priv->tx_lock); timeout = wait_for_completion_timeout(&tx_wait, msecs_to_jiffies(MWL8K_TX_WAIT_TIMEOUT_MS)); + + if (atomic_read(&priv->watchdog_event_pending)) { + spin_lock_bh(&priv->tx_lock); + priv->tx_wait = NULL; + spin_unlock_bh(&priv->tx_lock); + return 0; + } + spin_lock_bh(&priv->tx_lock); if (timeout) { @@ -3645,6 +3658,7 @@ static void mwl8k_watchdog_ba_events(struct work_struct *work) spin_unlock(&priv->stream_lock); done: + atomic_dec(&priv->watchdog_event_pending); status = ioread32(priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); iowrite32((status | MWL8K_A2H_INT_BA_WATCHDOG), priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); @@ -4346,6 +4360,10 @@ static irqreturn_t mwl8k_interrupt(int irq, void *dev_id) } if (status & MWL8K_A2H_INT_BA_WATCHDOG) { + iowrite32(~MWL8K_A2H_INT_BA_WATCHDOG, + priv->regs + MWL8K_HIU_A2H_INTERRUPT_STATUS_MASK); + + atomic_inc(&priv->watchdog_event_pending); status &= ~MWL8K_A2H_INT_BA_WATCHDOG; ieee80211_queue_work(hw, &priv->watchdog_ba_handle); } @@ -5520,6 +5538,7 @@ static int mwl8k_probe_hw(struct ieee80211_hw *hw) priv->sniffer_enabled = false; priv->wmm_enabled = false; priv->pending_tx_pkts = 0; + atomic_set(&priv->watchdog_event_pending, 0); rc = mwl8k_rxq_init(hw, 0); if (rc) -- cgit v1.2.3 From c2f2e2029bea2a8a759b2bc2a44f4d41539af236 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Thu, 3 Jan 2013 13:24:44 +0530 Subject: mwl8k: bump firmware API to 3 New firmware is required to support a) Add support for additional ampdu streams b) Handle corresponding watchdog events to destroy ampdu streams Bumping firmware API version by one. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 3b046cc81cdd..c4d287b48e64 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -5321,7 +5321,7 @@ enum { MWL8366, }; -#define MWL8K_8366_AP_FW_API 2 +#define MWL8K_8366_AP_FW_API 3 #define _MWL8K_8366_AP_FW(api) "mwl8k/fmimage_8366_ap-" #api ".fw" #define MWL8K_8366_AP_FW(api) _MWL8K_8366_AP_FW(api) -- cgit v1.2.3 From 03c2dc73581ad4ae54f1ccfc1463929b16b8b736 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 3 Jan 2013 14:55:48 +0530 Subject: ath9k_hw: Fix calibration for AR9340 TX_IQ_ON_AGC_CAL should not be enabled for AR9340. TX-IQ calibration is run as part of AGC calibration only for AR9485, AR9462 and AR9565. For the others (AR9300, AR9330, AR9340), TX-IQ cal is done independent of AGC-cal. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index a562a5d47eab..fa67e84d51ea 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -319,7 +319,7 @@ static void ar9003_hw_init_cal_settings(struct ath_hw *ah) if (AR_SREV_9300_20_OR_LATER(ah)) { ah->enabled_cals |= TX_IQ_CAL; - if (AR_SREV_9485_OR_LATER(ah)) + if (AR_SREV_9485_OR_LATER(ah) && !AR_SREV_9340(ah)) ah->enabled_cals |= TX_IQ_ON_AGC_CAL; } -- cgit v1.2.3 From 929a03aeb149017e88fbe5878c2b6585cfda8704 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:20 +0100 Subject: bcma: make bcma_find_core_unit() accessible This bcma_find_core_unit() is needed by the mips driver in the next patch. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/bcma_private.h | 2 ++ drivers/bcma/main.c | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h index 4a2d72ec6d43..d35294e81d15 100644 --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -31,6 +31,8 @@ int __init bcma_bus_early_register(struct bcma_bus *bus, int bcma_bus_suspend(struct bcma_bus *bus); int bcma_bus_resume(struct bcma_bus *bus); #endif +struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, + u8 unit); /* scan.c */ int bcma_bus_scan(struct bcma_bus *bus); diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index 53ba20ca17e0..d12b7da556e1 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -81,8 +81,8 @@ struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) } EXPORT_SYMBOL_GPL(bcma_find_core); -static struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, - u8 unit) +struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid, + u8 unit) { struct bcma_device *core; -- cgit v1.2.3 From e3f05a42faac627d8704c76c1927e09b22443b7b Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:21 +0100 Subject: bcma: mips: explicit assign IRQ numbers The assignment of the IRQs to the cores of the chips by iterating over the cores is complicated and causes problems with SoC like the BCM4706 with two GMAC core where just one should get a dedicated IRQ number. Now the code assigns the same IRQs to the cores as the code from the Broadcom SDK does. If the SoC is not know the current assigned IRQs are only read out and an error message is printed. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_mips.c | 84 ++++++++++++++++++++++++++++++---------------- 1 file changed, 56 insertions(+), 28 deletions(-) diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 792daad28cbc..171be0f541e0 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -147,6 +147,22 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) dev->id.id, oldirq + 2, irq + 2); } +static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, + u16 coreid, u8 unit) +{ + struct bcma_device *core; + + core = bcma_find_core_unit(bus, coreid, unit); + if (!core) { + bcma_warn(bus, + "Can not find core (id: 0x%x, unit %i) for IRQ configuration.\n", + coreid, unit); + return; + } + + bcma_core_mips_set_irq(core, irq); +} + static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) { int i; @@ -242,35 +258,47 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) mcore->assigned_irqs = 1; - /* Assign IRQs to all cores on the bus */ - list_for_each_entry(core, &bus->cores, list) { - int mips_irq; - if (core->irq) - continue; - - mips_irq = bcma_core_mips_irq(core); - if (mips_irq > 4) - core->irq = 0; - else - core->irq = mips_irq + 2; - if (core->irq > 5) - continue; - switch (core->id.id) { - case BCMA_CORE_PCI: - case BCMA_CORE_PCIE: - case BCMA_CORE_ETHERNET: - case BCMA_CORE_ETHERNET_GBIT: - case BCMA_CORE_MAC_GBIT: - case BCMA_CORE_80211: - case BCMA_CORE_USB20_HOST: - /* These devices get their own IRQ line if available, - * the rest goes on IRQ0 - */ - if (mcore->assigned_irqs <= 4) - bcma_core_mips_set_irq(core, - mcore->assigned_irqs++); - break; + switch (bus->chipinfo.id) { + case BCMA_CHIP_ID_BCM4716: + case BCMA_CHIP_ID_BCM4748: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); + bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); + bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_PCIE, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); + break; + case BCMA_CHIP_ID_BCM5356: + case BCMA_CHIP_ID_BCM47162: + case BCMA_CHIP_ID_BCM53572: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); + break; + case BCMA_CHIP_ID_BCM5357: + case BCMA_CHIP_ID_BCM4749: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_80211, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_MAC_GBIT, 0); + bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_USB20_HOST, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_CHIPCOMMON, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_I2S, 0); + break; + case BCMA_CHIP_ID_BCM4706: + bcma_core_mips_set_irq_name(bus, 1, BCMA_CORE_PCIE, 0); + bcma_core_mips_set_irq_name(bus, 2, BCMA_CORE_4706_MAC_GBIT, + 0); + bcma_core_mips_set_irq_name(bus, 3, BCMA_CORE_PCIE, 1); + bcma_core_mips_set_irq_name(bus, 4, BCMA_CORE_USB20_HOST, 0); + bcma_core_mips_set_irq_name(bus, 0, BCMA_CORE_4706_CHIPCOMMON, + 0); + break; + default: + list_for_each_entry(core, &bus->cores, list) { + core->irq = bcma_core_irq(core); } + bcma_err(bus, + "Unknown device (0x%x) found, can not configure IRQs\n", + bus->chipinfo.id); } bcma_info(bus, "IRQ reconfiguration done\n"); bcma_core_mips_dump_irq(bus); -- cgit v1.2.3 From 7401cb63d00994dbdfdc2916b949b22e27475436 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:22 +0100 Subject: bcma: mips: make some info messages debug messages Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_mips.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 171be0f541e0..486aa2dba581 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -143,8 +143,8 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) 1 << irqflag); } - bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n", - dev->id.id, oldirq + 2, irq + 2); + bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n", + dev->id.id, oldirq + 2, irq + 2); } static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, @@ -167,7 +167,7 @@ static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) { int i; static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; - printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); + printk(KERN_DEBUG KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); for (i = 0; i <= 6; i++) printk(" %s%s", irq_name[i], i == irq ? "*" : " "); printk("\n"); @@ -252,7 +252,7 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) if (mcore->setup_done) return; - bcma_info(bus, "Initializing MIPS core...\n"); + bcma_debug(bus, "Initializing MIPS core...\n"); bcma_core_mips_early_init(mcore); @@ -300,7 +300,7 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) "Unknown device (0x%x) found, can not configure IRQs\n", bus->chipinfo.id); } - bcma_info(bus, "IRQ reconfiguration done\n"); + bcma_debug(bus, "IRQ reconfiguration done\n"); bcma_core_mips_dump_irq(bus); mcore->setup_done = true; -- cgit v1.2.3 From db5230d1b3c5f7c62564de2ef07ea1c633548959 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:23 +0100 Subject: bcma: mips: show also disabled IRQs Some cores do not have a IRQ assigned and some do not support when an IRQ is assigned to them, this is now handled and printed out in the code. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_mips.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 486aa2dba581..69815079a6dd 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -74,11 +74,16 @@ static u32 bcma_core_mips_irqflag(struct bcma_device *dev) return dev->core_index; flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); - return flag & 0x1F; + if (flag) + return flag & 0x1F; + else + return 0x3f; } /* Get the MIPS IRQ assignment for a specified device. * If unassigned, 0 is returned. + * If disabled, 5 is returned. + * If not supported, 6 is returned. */ unsigned int bcma_core_mips_irq(struct bcma_device *dev) { @@ -87,13 +92,15 @@ unsigned int bcma_core_mips_irq(struct bcma_device *dev) unsigned int irq; irqflag = bcma_core_mips_irqflag(dev); + if (irqflag == 0x3f) + return 6; - for (irq = 1; irq <= 4; irq++) + for (irq = 0; irq <= 4; irq++) if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & (1 << irqflag)) return irq; - return 0; + return 5; } EXPORT_SYMBOL(bcma_core_mips_irq); @@ -114,7 +121,7 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ~(1 << irqflag)); - else + else if (oldirq != 5) bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0); /* assign the new one */ @@ -144,7 +151,7 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) } bcma_debug(bus, "set_irq: core 0x%04x, irq %d => %d\n", - dev->id.id, oldirq + 2, irq + 2); + dev->id.id, oldirq <= 4 ? oldirq + 2 : 0, irq + 2); } static void bcma_core_mips_set_irq_name(struct bcma_bus *bus, unsigned int irq, -- cgit v1.2.3 From 8f9dc85348ac37ff3b6b031d22e93a5b59d81f83 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:24 +0100 Subject: bcma: mips: remove assigned_irqs from structure This member is not needed any more. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_mips.c | 2 -- include/linux/bcma/bcma_driver_mips.h | 1 - 2 files changed, 3 deletions(-) diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 69815079a6dd..c6d7be33b972 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -263,8 +263,6 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) bcma_core_mips_early_init(mcore); - mcore->assigned_irqs = 1; - switch (bus->chipinfo.id) { case BCMA_CHIP_ID_BCM4716: case BCMA_CHIP_ID_BCM4748: diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index 0baf8a56b794..6495579e3f35 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -36,7 +36,6 @@ struct bcma_drv_mips { struct bcma_device *core; u8 setup_done:1; u8 early_setup_done:1; - unsigned int assigned_irqs; }; #ifdef CONFIG_BCMA_DRIVER_MIPS -- cgit v1.2.3 From 6ba1eafed183c6e0886d3483c8acac4efe1e95db Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Fri, 4 Jan 2013 00:51:25 +0100 Subject: bcma: mips: rename oldirqflag to irqinitmask The new name better matches the use of this variable. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_mips.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index c6d7be33b972..8a51c7950536 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -130,9 +130,9 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | (1 << irqflag)); } else { - u32 oldirqflag = bcma_read32(mdev, - BCMA_MIPS_MIPS74K_INTMASK(irq)); - if (oldirqflag) { + u32 irqinitmask = bcma_read32(mdev, + BCMA_MIPS_MIPS74K_INTMASK(irq)); + if (irqinitmask) { struct bcma_device *core; /* backplane irq line is in use, find out who uses @@ -140,7 +140,7 @@ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) */ list_for_each_entry(core, &bus->cores, list) { if ((1 << bcma_core_mips_irqflag(core)) == - oldirqflag) { + irqinitmask) { bcma_core_mips_set_irq(core, 0); break; } -- cgit v1.2.3 From 659c4788611f725ede2def6e4db5d8d4a59b93b5 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Thu, 3 Jan 2013 21:21:28 -0800 Subject: mwifiex: access interrupt status only while holding lock This patch fixes a bug for few instances where PCIe interrupt status variable is accessed without holding spin lock. This can result into missing interrupts. Fix this by copying interrupt status to a local variable and then using it for calling specific routine. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 13fbc4eb1595..e4c2cfdd049c 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -1594,39 +1594,40 @@ exit: static int mwifiex_process_int_status(struct mwifiex_adapter *adapter) { int ret; - u32 pcie_ireg = 0; + u32 pcie_ireg; unsigned long flags; spin_lock_irqsave(&adapter->int_lock, flags); /* Clear out unused interrupts */ - adapter->int_status &= HOST_INTR_MASK; + pcie_ireg = adapter->int_status; + adapter->int_status = 0; spin_unlock_irqrestore(&adapter->int_lock, flags); - while (adapter->int_status & HOST_INTR_MASK) { - if (adapter->int_status & HOST_INTR_DNLD_DONE) { - adapter->int_status &= ~HOST_INTR_DNLD_DONE; + while (pcie_ireg & HOST_INTR_MASK) { + if (pcie_ireg & HOST_INTR_DNLD_DONE) { + pcie_ireg &= ~HOST_INTR_DNLD_DONE; if (adapter->data_sent) { dev_dbg(adapter->dev, "info: DATA sent intr\n"); adapter->data_sent = false; } } - if (adapter->int_status & HOST_INTR_UPLD_RDY) { - adapter->int_status &= ~HOST_INTR_UPLD_RDY; + if (pcie_ireg & HOST_INTR_UPLD_RDY) { + pcie_ireg &= ~HOST_INTR_UPLD_RDY; dev_dbg(adapter->dev, "info: Rx DATA\n"); ret = mwifiex_pcie_process_recv_data(adapter); if (ret) return ret; } - if (adapter->int_status & HOST_INTR_EVENT_RDY) { - adapter->int_status &= ~HOST_INTR_EVENT_RDY; + if (pcie_ireg & HOST_INTR_EVENT_RDY) { + pcie_ireg &= ~HOST_INTR_EVENT_RDY; dev_dbg(adapter->dev, "info: Rx EVENT\n"); ret = mwifiex_pcie_process_event_ready(adapter); if (ret) return ret; } - if (adapter->int_status & HOST_INTR_CMD_DONE) { - adapter->int_status &= ~HOST_INTR_CMD_DONE; + if (pcie_ireg & HOST_INTR_CMD_DONE) { + pcie_ireg &= ~HOST_INTR_CMD_DONE; if (adapter->cmd_sent) { dev_dbg(adapter->dev, "info: CMD sent Interrupt\n"); @@ -1654,8 +1655,6 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter) "Write register failed\n"); return -1; } - adapter->int_status |= pcie_ireg; - adapter->int_status &= HOST_INTR_MASK; } } -- cgit v1.2.3 From c6d1d87a10d1e5317701676c39bbec20e4651b91 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Thu, 3 Jan 2013 21:21:29 -0800 Subject: mwifiex: add init_fw_port handler for PCIe interface This patch adds support for init_fw_port handler for PCIe interface, which resets RXBD read pointer for PCIe. This fixes issue where RX doesn't work until some TX from driver happens. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/init.c | 6 ++++++ drivers/net/wireless/mwifiex/main.h | 1 + drivers/net/wireless/mwifiex/pcie.c | 20 ++++++++++++++++++-- 3 files changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mwifiex/init.c b/drivers/net/wireless/mwifiex/init.c index 39f03ce5a5b1..e00b8060aff7 100644 --- a/drivers/net/wireless/mwifiex/init.c +++ b/drivers/net/wireless/mwifiex/init.c @@ -591,6 +591,12 @@ int mwifiex_init_fw(struct mwifiex_adapter *adapter) return -1; } } + + if (adapter->if_ops.init_fw_port) { + if (adapter->if_ops.init_fw_port(adapter)) + return -1; + } + for (i = 0; i < adapter->priv_num; i++) { if (adapter->priv[i]) { ret = mwifiex_sta_init_cmd(adapter->priv[i], first_sta); diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index d717c9859fb9..ef02a5bf57b1 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -599,6 +599,7 @@ struct mwifiex_if_ops { int (*cmdrsp_complete) (struct mwifiex_adapter *, struct sk_buff *); int (*event_complete) (struct mwifiex_adapter *, struct sk_buff *); int (*data_complete) (struct mwifiex_adapter *, struct sk_buff *); + int (*init_fw_port) (struct mwifiex_adapter *); int (*dnld_fw) (struct mwifiex_adapter *, struct mwifiex_fw_image *); void (*card_reset) (struct mwifiex_adapter *); }; diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index e4c2cfdd049c..191c6825a6b6 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -966,8 +966,23 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) return 0; } -/* - * This function downloads commands to the device +/* This function init rx port in firmware which in turn enables to receive data + * from device before transmitting any packet. + */ +static int mwifiex_pcie_init_fw_port(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + + /* Write the RX ring read pointer in to REG_RXBD_RDPTR */ + if (mwifiex_write_reg(adapter, REG_RXBD_RDPTR, card->rxbd_rdptr | 0)) { + dev_err(adapter->dev, + "RECV DATA: failed to write REG_RXBD_RDPTR\n"); + return -1; + } + return 0; +} + +/* This function downloads commands to the device */ static int mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) @@ -1899,6 +1914,7 @@ static struct mwifiex_if_ops pcie_ops = { .event_complete = mwifiex_pcie_event_complete, .update_mp_end_port = NULL, .cleanup_mpa_buf = NULL, + .init_fw_port = mwifiex_pcie_init_fw_port, }; /* -- cgit v1.2.3 From fc3314609047daf472b3ffc49f9a1c5608068713 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Thu, 3 Jan 2013 21:21:30 -0800 Subject: mwifiex: use pci_alloc/free_consistent APIs for PCIe This patch uses pci_alloc_consistent and pci_free_consistent APIs for mwifiex_pcie driver. Consistent DMA memory is allocated for TX, RX and event rings. Command buffer and command response buffer also uses map/unmap memory APIs to download commands and get command responses. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 362 ++++++++++++++++++++------------- drivers/net/wireless/mwifiex/pcie.h | 9 +- drivers/net/wireless/mwifiex/sta_cmd.c | 10 +- drivers/net/wireless/mwifiex/util.h | 8 +- 4 files changed, 235 insertions(+), 154 deletions(-) diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 191c6825a6b6..ac20bc4bc1a0 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -39,17 +39,20 @@ static struct semaphore add_remove_card_sem; static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter); static int mwifiex_pcie_resume(struct pci_dev *pdev); -/* - * This function is called after skb allocation to update - * "skb->cb" with physical address of data pointer. - */ -static phys_addr_t *mwifiex_update_sk_buff_pa(struct sk_buff *skb) +static int +mwifiex_map_pci_memory(struct mwifiex_adapter *adapter, struct sk_buff *skb, + int size, int flags) { - phys_addr_t *buf_pa = MWIFIEX_SKB_PACB(skb); - - *buf_pa = (phys_addr_t)virt_to_phys(skb->data); + struct pcie_service_card *card = adapter->card; + dma_addr_t buf_pa; - return buf_pa; + buf_pa = pci_map_single(card->dev, skb->data, size, flags); + if (pci_dma_mapping_error(card->dev, buf_pa)) { + dev_err(adapter->dev, "failed to map pci memory!\n"); + return -1; + } + memcpy(skb->cb, &buf_pa, sizeof(dma_addr_t)); + return 0; } /* @@ -60,8 +63,8 @@ static bool mwifiex_pcie_ok_to_access_hw(struct mwifiex_adapter *adapter) u32 *cookie_addr; struct pcie_service_card *card = adapter->card; - if (card->sleep_cookie) { - cookie_addr = (u32 *)card->sleep_cookie->data; + if (card->sleep_cookie_vbase) { + cookie_addr = (u32 *)card->sleep_cookie_vbase; dev_dbg(adapter->dev, "info: ACCESS_HW: sleep cookie=0x%x\n", *cookie_addr); if (*cookie_addr == FW_AWAKE_COOKIE) @@ -366,9 +369,7 @@ static int mwifiex_pcie_enable_host_int(struct mwifiex_adapter *adapter) static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; - struct sk_buff *skb; int i; - phys_addr_t *buf_pa; /* * driver maintaines the write pointer and firmware maintaines the read @@ -384,16 +385,18 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) MWIFIEX_MAX_TXRX_BD; dev_dbg(adapter->dev, "info: txbd_ring: Allocating %d bytes\n", card->txbd_ring_size); - card->txbd_ring_vbase = kzalloc(card->txbd_ring_size, GFP_KERNEL); + card->txbd_ring_vbase = pci_alloc_consistent(card->dev, + card->txbd_ring_size, + &card->txbd_ring_pbase); if (!card->txbd_ring_vbase) { - dev_err(adapter->dev, "Unable to alloc buffer for txbd ring\n"); + dev_err(adapter->dev, + "allocate consistent memory (%d bytes) failed!\n", + card->txbd_ring_size); return -ENOMEM; } - card->txbd_ring_pbase = virt_to_phys(card->txbd_ring_vbase); - dev_dbg(adapter->dev, "info: txbd_ring - base: %p, pbase: %#x:%x, len: %x\n", - card->txbd_ring_vbase, (u32)card->txbd_ring_pbase, + card->txbd_ring_vbase, (unsigned int)card->txbd_ring_pbase, (u32)((u64)card->txbd_ring_pbase >> 32), card->txbd_ring_size); for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { @@ -402,24 +405,9 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) (sizeof(struct mwifiex_pcie_buf_desc) * i)); - /* Allocate buffer here so that firmware can DMA data from it */ - skb = dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE); - if (!skb) { - dev_err(adapter->dev, "Unable to allocate skb for TX ring.\n"); - kfree(card->txbd_ring_vbase); - return -ENOMEM; - } - buf_pa = mwifiex_update_sk_buff_pa(skb); - - skb_put(skb, MWIFIEX_RX_DATA_BUF_SIZE); - dev_dbg(adapter->dev, "info: TX ring: add new skb base: %p, " - "buf_base: %p, buf_pbase: %#x:%x, buf_len: %#x\n", - skb, skb->data, (u32)*buf_pa, - (u32)(((u64)*buf_pa >> 32)), skb->len); - - card->tx_buf_list[i] = skb; - card->txbd_ring[i]->paddr = *buf_pa; - card->txbd_ring[i]->len = (u16)skb->len; + card->tx_buf_list[i] = NULL; + card->txbd_ring[i]->paddr = 0; + card->txbd_ring[i]->len = 0; card->txbd_ring[i]->flags = 0; } @@ -429,11 +417,16 @@ static int mwifiex_pcie_create_txbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + struct sk_buff *skb; int i; for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - if (card->tx_buf_list[i]) - dev_kfree_skb_any(card->tx_buf_list[i]); + if (card->tx_buf_list[i]) { + skb = card->tx_buf_list[i]; + pci_unmap_single(card->dev, card->txbd_ring[i]->paddr, + skb->len, PCI_DMA_TODEVICE); + dev_kfree_skb_any(skb); + } card->tx_buf_list[i] = NULL; card->txbd_ring[i]->paddr = 0; card->txbd_ring[i]->len = 0; @@ -441,11 +434,15 @@ static int mwifiex_pcie_delete_txbd_ring(struct mwifiex_adapter *adapter) card->txbd_ring[i] = NULL; } - kfree(card->txbd_ring_vbase); + if (card->txbd_ring_vbase) + pci_free_consistent(card->dev, card->txbd_ring_size, + card->txbd_ring_vbase, + card->txbd_ring_pbase); card->txbd_ring_size = 0; card->txbd_wrptr = 0; card->txbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; card->txbd_ring_vbase = NULL; + card->txbd_ring_pbase = 0; return 0; } @@ -458,7 +455,7 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; struct sk_buff *skb; int i; - phys_addr_t *buf_pa; + dma_addr_t buf_pa; /* * driver maintaines the read pointer and firmware maintaines the write @@ -472,13 +469,15 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) MWIFIEX_MAX_TXRX_BD; dev_dbg(adapter->dev, "info: rxbd_ring: Allocating %d bytes\n", card->rxbd_ring_size); - card->rxbd_ring_vbase = kzalloc(card->rxbd_ring_size, GFP_KERNEL); + card->rxbd_ring_vbase = pci_alloc_consistent(card->dev, + card->rxbd_ring_size, + &card->rxbd_ring_pbase); if (!card->rxbd_ring_vbase) { - dev_err(adapter->dev, "Unable to allocate buffer for " - "rxbd_ring.\n"); + dev_err(adapter->dev, + "allocate consistent memory (%d bytes) failed!\n", + card->rxbd_ring_size); return -ENOMEM; } - card->rxbd_ring_pbase = virt_to_phys(card->rxbd_ring_vbase); dev_dbg(adapter->dev, "info: rxbd_ring - base: %p, pbase: %#x:%x, len: %#x\n", @@ -500,16 +499,20 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) kfree(card->rxbd_ring_vbase); return -ENOMEM; } - buf_pa = mwifiex_update_sk_buff_pa(skb); - skb_put(skb, MWIFIEX_RX_DATA_BUF_SIZE); + if (mwifiex_map_pci_memory(adapter, skb, + MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); dev_dbg(adapter->dev, "info: RX ring: add new skb base: %p, " "buf_base: %p, buf_pbase: %#x:%x, buf_len: %#x\n", - skb, skb->data, (u32)*buf_pa, (u32)((u64)*buf_pa >> 32), + skb, skb->data, (u32)buf_pa, (u32)((u64)buf_pa >> 32), skb->len); card->rx_buf_list[i] = skb; - card->rxbd_ring[i]->paddr = *buf_pa; + card->rxbd_ring[i]->paddr = buf_pa; card->rxbd_ring[i]->len = (u16)skb->len; card->rxbd_ring[i]->flags = 0; } @@ -523,11 +526,17 @@ static int mwifiex_pcie_create_rxbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + struct sk_buff *skb; int i; for (i = 0; i < MWIFIEX_MAX_TXRX_BD; i++) { - if (card->rx_buf_list[i]) - dev_kfree_skb_any(card->rx_buf_list[i]); + if (card->rx_buf_list[i]) { + skb = card->rx_buf_list[i]; + pci_unmap_single(card->dev, card->rxbd_ring[i]->paddr , + MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(skb); + } card->rx_buf_list[i] = NULL; card->rxbd_ring[i]->paddr = 0; card->rxbd_ring[i]->len = 0; @@ -535,11 +544,15 @@ static int mwifiex_pcie_delete_rxbd_ring(struct mwifiex_adapter *adapter) card->rxbd_ring[i] = NULL; } - kfree(card->rxbd_ring_vbase); + if (card->rxbd_ring_vbase) + pci_free_consistent(card->dev, card->rxbd_ring_size, + card->rxbd_ring_vbase, + card->rxbd_ring_pbase); card->rxbd_ring_size = 0; card->rxbd_wrptr = 0; card->rxbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; card->rxbd_ring_vbase = NULL; + card->rxbd_ring_pbase = 0; return 0; } @@ -552,7 +565,7 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; struct sk_buff *skb; int i; - phys_addr_t *buf_pa; + dma_addr_t buf_pa; /* * driver maintaines the read pointer and firmware maintaines the write @@ -566,13 +579,15 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) MWIFIEX_MAX_EVT_BD; dev_dbg(adapter->dev, "info: evtbd_ring: Allocating %d bytes\n", card->evtbd_ring_size); - card->evtbd_ring_vbase = kzalloc(card->evtbd_ring_size, GFP_KERNEL); + card->evtbd_ring_vbase = pci_alloc_consistent(card->dev, + card->evtbd_ring_size, + &card->evtbd_ring_pbase); if (!card->evtbd_ring_vbase) { dev_err(adapter->dev, - "Unable to allocate buffer. Terminating download\n"); + "allocate consistent memory (%d bytes) failed!\n", + card->evtbd_ring_size); return -ENOMEM; } - card->evtbd_ring_pbase = virt_to_phys(card->evtbd_ring_vbase); dev_dbg(adapter->dev, "info: CMDRSP/EVT bd_ring - base: %p pbase: %#x:%x len: %#x\n", @@ -594,16 +609,20 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) kfree(card->evtbd_ring_vbase); return -ENOMEM; } - buf_pa = mwifiex_update_sk_buff_pa(skb); skb_put(skb, MAX_EVENT_SIZE); + if (mwifiex_map_pci_memory(adapter, skb, MAX_EVENT_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); dev_dbg(adapter->dev, "info: Evt ring: add new skb. base: %p, " "buf_base: %p, buf_pbase: %#x:%x, buf_len: %#x\n", - skb, skb->data, (u32)*buf_pa, (u32)((u64)*buf_pa >> 32), + skb, skb->data, (u32)buf_pa, (u32)((u64)buf_pa >> 32), skb->len); card->evt_buf_list[i] = skb; - card->evtbd_ring[i]->paddr = *buf_pa; + card->evtbd_ring[i]->paddr = buf_pa; card->evtbd_ring[i]->len = (u16)skb->len; card->evtbd_ring[i]->flags = 0; } @@ -617,11 +636,16 @@ static int mwifiex_pcie_create_evtbd_ring(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + struct sk_buff *skb; int i; for (i = 0; i < MWIFIEX_MAX_EVT_BD; i++) { - if (card->evt_buf_list[i]) - dev_kfree_skb_any(card->evt_buf_list[i]); + if (card->evt_buf_list[i]) { + skb = card->evt_buf_list[i]; + pci_unmap_single(card->dev, card->evtbd_ring[i]->paddr, + MAX_EVENT_SIZE, PCI_DMA_FROMDEVICE); + dev_kfree_skb_any(skb); + } card->evt_buf_list[i] = NULL; card->evtbd_ring[i]->paddr = 0; card->evtbd_ring[i]->len = 0; @@ -629,11 +653,15 @@ static int mwifiex_pcie_delete_evtbd_ring(struct mwifiex_adapter *adapter) card->evtbd_ring[i] = NULL; } - kfree(card->evtbd_ring_vbase); + if (card->evtbd_ring_vbase) + pci_free_consistent(card->dev, card->evtbd_ring_size, + card->evtbd_ring_vbase, + card->evtbd_ring_pbase); card->evtbd_wrptr = 0; card->evtbd_rdptr = 0 | MWIFIEX_BD_FLAG_ROLLOVER_IND; card->evtbd_ring_size = 0; card->evtbd_ring_vbase = NULL; + card->evtbd_ring_pbase = 0; return 0; } @@ -653,21 +681,12 @@ static int mwifiex_pcie_alloc_cmdrsp_buf(struct mwifiex_adapter *adapter) "Unable to allocate skb for command response data.\n"); return -ENOMEM; } - mwifiex_update_sk_buff_pa(skb); skb_put(skb, MWIFIEX_UPLD_SIZE); - card->cmdrsp_buf = skb; + if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; - skb = NULL; - /* Allocate memory for sending command to firmware */ - skb = dev_alloc_skb(MWIFIEX_SIZE_OF_CMD_BUFFER); - if (!skb) { - dev_err(adapter->dev, - "Unable to allocate skb for command data.\n"); - return -ENOMEM; - } - mwifiex_update_sk_buff_pa(skb); - skb_put(skb, MWIFIEX_SIZE_OF_CMD_BUFFER); - card->cmd_buf = skb; + card->cmdrsp_buf = skb; return 0; } @@ -678,18 +697,26 @@ static int mwifiex_pcie_alloc_cmdrsp_buf(struct mwifiex_adapter *adapter) static int mwifiex_pcie_delete_cmdrsp_buf(struct mwifiex_adapter *adapter) { struct pcie_service_card *card; + dma_addr_t buf_pa; if (!adapter) return 0; card = adapter->card; - if (card && card->cmdrsp_buf) + if (card && card->cmdrsp_buf) { + MWIFIEX_SKB_PACB(card->cmdrsp_buf, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE); dev_kfree_skb_any(card->cmdrsp_buf); + } - if (card && card->cmd_buf) + if (card && card->cmd_buf) { + MWIFIEX_SKB_PACB(card->cmd_buf, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_SIZE_OF_CMD_BUFFER, + PCI_DMA_TODEVICE); dev_kfree_skb_any(card->cmd_buf); - + } return 0; } @@ -698,27 +725,19 @@ static int mwifiex_pcie_delete_cmdrsp_buf(struct mwifiex_adapter *adapter) */ static int mwifiex_pcie_alloc_sleep_cookie_buf(struct mwifiex_adapter *adapter) { - struct sk_buff *skb; struct pcie_service_card *card = adapter->card; - /* Allocate memory for sleep cookie */ - skb = dev_alloc_skb(sizeof(u32)); - if (!skb) { - dev_err(adapter->dev, - "Unable to allocate skb for sleep cookie!\n"); + card->sleep_cookie_vbase = pci_alloc_consistent(card->dev, sizeof(u32), + &card->sleep_cookie_pbase); + if (!card->sleep_cookie_vbase) { + dev_err(adapter->dev, "pci_alloc_consistent failed!\n"); return -ENOMEM; } - mwifiex_update_sk_buff_pa(skb); - skb_put(skb, sizeof(u32)); - /* Init val of Sleep Cookie */ - *(u32 *)skb->data = FW_AWAKE_COOKIE; + *(u32 *)card->sleep_cookie_vbase = FW_AWAKE_COOKIE; dev_dbg(adapter->dev, "alloc_scook: sleep cookie=0x%x\n", - *((u32 *)skb->data)); - - /* Save the sleep cookie */ - card->sleep_cookie = skb; + *((u32 *)card->sleep_cookie_vbase)); return 0; } @@ -735,9 +754,11 @@ static int mwifiex_pcie_delete_sleep_cookie_buf(struct mwifiex_adapter *adapter) card = adapter->card; - if (card && card->sleep_cookie) { - dev_kfree_skb_any(card->sleep_cookie); - card->sleep_cookie = NULL; + if (card && card->sleep_cookie_vbase) { + pci_free_consistent(card->dev, sizeof(u32), + card->sleep_cookie_vbase, + card->sleep_cookie_pbase); + card->sleep_cookie_vbase = NULL; } return 0; @@ -751,7 +772,7 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) { struct pcie_service_card *card = adapter->card; u32 wrindx, rdptr; - phys_addr_t *buf_pa; + phys_addr_t buf_pa; __le16 *tmp; if (!mwifiex_pcie_ok_to_access_hw(adapter)) @@ -785,8 +806,8 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) *tmp = cpu_to_le16(MWIFIEX_TYPE_DATA); skb_put(skb_data, MWIFIEX_RX_DATA_BUF_SIZE - skb_data->len); skb_trim(skb_data, skb->len); - buf_pa = MWIFIEX_SKB_PACB(skb_data); - card->txbd_ring[wrindx]->paddr = *buf_pa; + MWIFIEX_SKB_PACB(skb_data, &buf_pa); + card->txbd_ring[wrindx]->paddr = buf_pa; card->txbd_ring[wrindx]->len = (u16)skb_data->len; card->txbd_ring[wrindx]->flags = MWIFIEX_BD_FLAG_FIRST_DESC | MWIFIEX_BD_FLAG_LAST_DESC; @@ -918,32 +939,41 @@ done: static int mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) { - phys_addr_t *buf_pa = MWIFIEX_SKB_PACB(skb); + dma_addr_t buf_pa; + struct pcie_service_card *card = adapter->card; - if (!(skb->data && skb->len && *buf_pa)) { + if (!(skb->data && skb->len)) { dev_err(adapter->dev, - "Invalid parameter in %s <%p, %#x:%x, %x>\n", - __func__, skb->data, skb->len, - (u32)*buf_pa, (u32)((u64)*buf_pa >> 32)); + "Invalid parameter in %s <%p. len %d>\n", + __func__, skb->data, skb->len); return -1; } + if (mwifiex_map_pci_memory(adapter, skb, skb->len , PCI_DMA_TODEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); + /* Write the lower 32bits of the physical address to scratch * register 0 */ - if (mwifiex_write_reg(adapter, PCIE_SCRATCH_0_REG, (u32)*buf_pa)) { + if (mwifiex_write_reg(adapter, PCIE_SCRATCH_0_REG, (u32)buf_pa)) { dev_err(adapter->dev, "%s: failed to write download command to boot code.\n", __func__); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_TODEVICE); return -1; } /* Write the upper 32bits of the physical address to scratch * register 1 */ if (mwifiex_write_reg(adapter, PCIE_SCRATCH_1_REG, - (u32)((u64)*buf_pa >> 32))) { + (u32)((u64)buf_pa >> 32))) { dev_err(adapter->dev, "%s: failed to write download command to boot code.\n", __func__); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_TODEVICE); return -1; } @@ -952,6 +982,8 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) dev_err(adapter->dev, "%s: failed to write command len to scratch reg 2\n", __func__); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_TODEVICE); return -1; } @@ -960,6 +992,8 @@ mwifiex_pcie_send_boot_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) CPU_INTR_DOOR_BELL)) { dev_err(adapter->dev, "%s: failed to assert door-bell intr\n", __func__); + pci_unmap_single(card->dev, buf_pa, + MWIFIEX_UPLD_SIZE, PCI_DMA_TODEVICE); return -1; } @@ -989,8 +1023,8 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) { struct pcie_service_card *card = adapter->card; int ret = 0; - phys_addr_t *cmd_buf_pa; - phys_addr_t *cmdrsp_buf_pa; + dma_addr_t cmd_buf_pa, cmdrsp_buf_pa; + u8 *payload = (u8 *)skb->data; if (!(skb->data && skb->len)) { dev_err(adapter->dev, "Invalid parameter in %s <%p, %#x>\n", @@ -1005,17 +1039,18 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) return -EBUSY; } - /* Make sure a command buffer is available */ - if (!card->cmd_buf) { - dev_err(adapter->dev, "Command buffer not available\n"); - return -EBUSY; - } + if (!mwifiex_pcie_ok_to_access_hw(adapter)) + mwifiex_pm_wakeup_card(adapter); adapter->cmd_sent = true; - /* Copy the given skb in to DMA accessable shared buffer */ - skb_put(card->cmd_buf, MWIFIEX_SIZE_OF_CMD_BUFFER - card->cmd_buf->len); - skb_trim(card->cmd_buf, skb->len); - memcpy(card->cmd_buf->data, skb->data, skb->len); + + *(__le16 *)&payload[0] = cpu_to_le16((u16)skb->len); + *(__le16 *)&payload[2] = cpu_to_le16(MWIFIEX_TYPE_CMD); + + if (mwifiex_map_pci_memory(adapter, skb, skb->len, PCI_DMA_TODEVICE)) + return -1; + + card->cmd_buf = skb; /* To send a command, the driver will: 1. Write the 64bit physical address of the data buffer to @@ -1028,11 +1063,11 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) */ if (card->cmdrsp_buf) { - cmdrsp_buf_pa = MWIFIEX_SKB_PACB(card->cmdrsp_buf); + MWIFIEX_SKB_PACB(card->cmdrsp_buf, &cmdrsp_buf_pa); /* Write the lower 32bits of the cmdrsp buffer physical address */ if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_LO, - (u32)*cmdrsp_buf_pa)) { + (u32)cmdrsp_buf_pa)) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); ret = -1; @@ -1041,7 +1076,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) /* Write the upper 32bits of the cmdrsp buffer physical address */ if (mwifiex_write_reg(adapter, REG_CMDRSP_ADDR_HI, - (u32)((u64)*cmdrsp_buf_pa >> 32))) { + (u32)((u64)cmdrsp_buf_pa >> 32))) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); ret = -1; @@ -1049,9 +1084,9 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) } } - cmd_buf_pa = MWIFIEX_SKB_PACB(card->cmd_buf); + MWIFIEX_SKB_PACB(card->cmd_buf, &cmd_buf_pa); /* Write the lower 32bits of the physical address to REG_CMD_ADDR_LO */ - if (mwifiex_write_reg(adapter, REG_CMD_ADDR_LO, (u32)*cmd_buf_pa)) { + if (mwifiex_write_reg(adapter, REG_CMD_ADDR_LO, (u32)cmd_buf_pa)) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); ret = -1; @@ -1059,7 +1094,7 @@ mwifiex_pcie_send_cmd(struct mwifiex_adapter *adapter, struct sk_buff *skb) } /* Write the upper 32bits of the physical address to REG_CMD_ADDR_HI */ if (mwifiex_write_reg(adapter, REG_CMD_ADDR_HI, - (u32)((u64)*cmd_buf_pa >> 32))) { + (u32)((u64)cmd_buf_pa >> 32))) { dev_err(adapter->dev, "Failed to write download cmd to boot code.\n"); ret = -1; @@ -1098,11 +1133,22 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; struct sk_buff *skb = card->cmdrsp_buf; int count = 0; + u16 rx_len; + __le16 pkt_len; + dma_addr_t buf_pa; dev_dbg(adapter->dev, "info: Rx CMD Response\n"); + MWIFIEX_SKB_PACB(skb, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE); + + pkt_len = *((__le16 *)skb->data); + rx_len = le16_to_cpu(pkt_len); + skb_trim(skb, rx_len); + skb_pull(skb, INTF_HEADER_LEN); + if (!adapter->curr_cmd) { - skb_pull(skb, INTF_HEADER_LEN); if (adapter->ps_state == PS_STATE_SLEEP_CFM) { mwifiex_process_sleep_confirm_resp(adapter, skb->data, skb->len); @@ -1115,9 +1161,12 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) } memcpy(adapter->upld_buf, skb->data, min_t(u32, MWIFIEX_SIZE_OF_CMD_BUFFER, skb->len)); - skb_push(skb, INTF_HEADER_LEN); + if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb, &buf_pa); } else if (mwifiex_pcie_ok_to_access_hw(adapter)) { - skb_pull(skb, INTF_HEADER_LEN); adapter->curr_cmd->resp_skb = skb; adapter->cmd_resp_received = true; /* Take the pointer and set it to CMD node and will @@ -1151,10 +1200,23 @@ static int mwifiex_pcie_cmdrsp_complete(struct mwifiex_adapter *adapter, struct sk_buff *skb) { struct pcie_service_card *card = adapter->card; + dma_addr_t buf_pa; + struct sk_buff *skb_tmp; if (skb) { card->cmdrsp_buf = skb; skb_push(card->cmdrsp_buf, INTF_HEADER_LEN); + if (mwifiex_map_pci_memory(adapter, skb, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + } + + skb_tmp = card->cmd_buf; + if (skb_tmp) { + MWIFIEX_SKB_PACB(skb_tmp, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_UPLD_SIZE, + PCI_DMA_FROMDEVICE); + card->cmd_buf = NULL; } return 0; @@ -1168,6 +1230,10 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr, event; + dma_addr_t buf_pa; + + if (!mwifiex_pcie_ok_to_access_hw(adapter)) + mwifiex_pm_wakeup_card(adapter); if (adapter->event_received) { dev_dbg(adapter->dev, "info: Event being processed, " @@ -1199,6 +1265,10 @@ static int mwifiex_pcie_process_event_ready(struct mwifiex_adapter *adapter) dev_dbg(adapter->dev, "info: Read Index: %d\n", rdptr); skb_cmd = card->evt_buf_list[rdptr]; + MWIFIEX_SKB_PACB(skb_cmd, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MAX_EVENT_SIZE, + PCI_DMA_FROMDEVICE); + /* Take the pointer and set it to event pointer in adapter and will return back after event handling callback */ card->evt_buf_list[rdptr] = NULL; @@ -1243,7 +1313,7 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, int ret = 0; u32 rdptr = card->evtbd_rdptr & MWIFIEX_EVTBD_MASK; u32 wrptr; - phys_addr_t *buf_pa; + dma_addr_t buf_pa; if (!skb) return 0; @@ -1263,9 +1333,14 @@ static int mwifiex_pcie_event_complete(struct mwifiex_adapter *adapter, if (!card->evt_buf_list[rdptr]) { skb_push(skb, INTF_HEADER_LEN); + if (mwifiex_map_pci_memory(adapter, skb, + MAX_EVENT_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + MWIFIEX_SKB_PACB(skb, &buf_pa); card->evt_buf_list[rdptr] = skb; - buf_pa = MWIFIEX_SKB_PACB(skb); - card->evtbd_ring[rdptr]->paddr = *buf_pa; + MWIFIEX_SKB_PACB(skb, &buf_pa); + card->evtbd_ring[rdptr]->paddr = buf_pa; card->evtbd_ring[rdptr]->len = (u16)skb->len; card->evtbd_ring[rdptr]->flags = 0; skb = NULL; @@ -1314,11 +1389,8 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, struct sk_buff *skb; u32 txlen, tx_blocks = 0, tries, len; u32 block_retry_cnt = 0; - - if (!adapter) { - pr_err("adapter structure is not valid\n"); - return -1; - } + dma_addr_t buf_pa; + struct pcie_service_card *card = adapter->card; if (!firmware || !firmware_len) { dev_err(adapter->dev, @@ -1340,7 +1412,6 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, ret = -ENOMEM; goto done; } - mwifiex_update_sk_buff_pa(skb); /* Perform firmware data transfer */ do { @@ -1415,6 +1486,9 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, ret = -1; goto done; } + + MWIFIEX_SKB_PACB(skb, &buf_pa); + /* Wait for the command done interrupt */ do { if (mwifiex_read_reg(adapter, PCIE_CPU_INT_STATUS, @@ -1422,11 +1496,17 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, dev_err(adapter->dev, "%s: Failed to read " "interrupt status during fw dnld.\n", __func__); + pci_unmap_single(card->dev, buf_pa, skb->len, + PCI_DMA_TODEVICE); ret = -1; goto done; } } while ((ireg_intr & CPU_INTR_DOOR_BELL) == CPU_INTR_DOOR_BELL); + + pci_unmap_single(card->dev, buf_pa, skb->len, + PCI_DMA_TODEVICE); + offset += txlen; } while (true); @@ -1828,15 +1908,8 @@ static void mwifiex_pcie_cleanup(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; struct pci_dev *pdev = card->dev; - mwifiex_pcie_delete_sleep_cookie_buf(adapter); - mwifiex_pcie_delete_cmdrsp_buf(adapter); - mwifiex_pcie_delete_evtbd_ring(adapter); - mwifiex_pcie_delete_rxbd_ring(adapter); - mwifiex_pcie_delete_txbd_ring(adapter); - card->cmdrsp_buf = NULL; - - dev_dbg(adapter->dev, "Clearing driver ready signature\n"); if (user_rmmod) { + dev_dbg(adapter->dev, "Clearing driver ready signature\n"); if (mwifiex_write_reg(adapter, REG_DRV_READY, 0x00000000)) dev_err(adapter->dev, "Failed to write driver not-ready signature\n"); @@ -1893,6 +1966,13 @@ static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) if (card) { dev_dbg(adapter->dev, "%s(): calling free_irq()\n", __func__); free_irq(card->dev->irq, card->dev); + + mwifiex_pcie_delete_sleep_cookie_buf(adapter); + mwifiex_pcie_delete_cmdrsp_buf(adapter); + mwifiex_pcie_delete_evtbd_ring(adapter); + mwifiex_pcie_delete_rxbd_ring(adapter); + mwifiex_pcie_delete_txbd_ring(adapter); + card->cmdrsp_buf = NULL; } } diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 2f218f9a3fd3..87201f554d2e 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -118,7 +118,7 @@ struct pcie_service_card { u32 txbd_rdptr; u32 txbd_ring_size; u8 *txbd_ring_vbase; - phys_addr_t txbd_ring_pbase; + dma_addr_t txbd_ring_pbase; struct mwifiex_pcie_buf_desc *txbd_ring[MWIFIEX_MAX_TXRX_BD]; struct sk_buff *tx_buf_list[MWIFIEX_MAX_TXRX_BD]; @@ -126,7 +126,7 @@ struct pcie_service_card { u32 rxbd_rdptr; u32 rxbd_ring_size; u8 *rxbd_ring_vbase; - phys_addr_t rxbd_ring_pbase; + dma_addr_t rxbd_ring_pbase; struct mwifiex_pcie_buf_desc *rxbd_ring[MWIFIEX_MAX_TXRX_BD]; struct sk_buff *rx_buf_list[MWIFIEX_MAX_TXRX_BD]; @@ -134,13 +134,14 @@ struct pcie_service_card { u32 evtbd_rdptr; u32 evtbd_ring_size; u8 *evtbd_ring_vbase; - phys_addr_t evtbd_ring_pbase; + dma_addr_t evtbd_ring_pbase; struct mwifiex_pcie_buf_desc *evtbd_ring[MWIFIEX_MAX_EVT_BD]; struct sk_buff *evt_buf_list[MWIFIEX_MAX_EVT_BD]; struct sk_buff *cmd_buf; struct sk_buff *cmdrsp_buf; - struct sk_buff *sleep_cookie; + u8 *sleep_cookie_vbase; + dma_addr_t sleep_cookie_pbase; void __iomem *pci_mmap; void __iomem *pci_mmap1; }; diff --git a/drivers/net/wireless/mwifiex/sta_cmd.c b/drivers/net/wireless/mwifiex/sta_cmd.c index 5d87195390f8..c4607859d59d 100644 --- a/drivers/net/wireless/mwifiex/sta_cmd.c +++ b/drivers/net/wireless/mwifiex/sta_cmd.c @@ -931,7 +931,6 @@ mwifiex_cmd_pcie_host_spec(struct mwifiex_private *priv, struct host_cmd_ds_pcie_details *host_spec = &cmd->params.pcie_host_spec; struct pcie_service_card *card = priv->adapter->card; - phys_addr_t *buf_pa; cmd->command = cpu_to_le16(HostCmd_CMD_PCIE_DESC_DETAILS); cmd->size = cpu_to_le16(sizeof(struct @@ -953,10 +952,11 @@ mwifiex_cmd_pcie_host_spec(struct mwifiex_private *priv, host_spec->evtbd_addr_lo = (u32)(card->evtbd_ring_pbase); host_spec->evtbd_addr_hi = (u32)(((u64)card->evtbd_ring_pbase)>>32); host_spec->evtbd_count = MWIFIEX_MAX_EVT_BD; - if (card->sleep_cookie) { - buf_pa = MWIFIEX_SKB_PACB(card->sleep_cookie); - host_spec->sleep_cookie_addr_lo = (u32) *buf_pa; - host_spec->sleep_cookie_addr_hi = (u32) (((u64)*buf_pa) >> 32); + if (card->sleep_cookie_vbase) { + host_spec->sleep_cookie_addr_lo = + (u32)(card->sleep_cookie_pbase); + host_spec->sleep_cookie_addr_hi = + (u32)(((u64)(card->sleep_cookie_pbase)) >> 32); dev_dbg(priv->adapter->dev, "sleep_cook_lo phy addr: 0x%x\n", host_spec->sleep_cookie_addr_lo); } diff --git a/drivers/net/wireless/mwifiex/util.h b/drivers/net/wireless/mwifiex/util.h index f6d36b9654a0..cb2d0582bd36 100644 --- a/drivers/net/wireless/mwifiex/util.h +++ b/drivers/net/wireless/mwifiex/util.h @@ -22,16 +22,16 @@ static inline struct mwifiex_rxinfo *MWIFIEX_SKB_RXCB(struct sk_buff *skb) { - return (struct mwifiex_rxinfo *)(skb->cb + sizeof(phys_addr_t)); + return (struct mwifiex_rxinfo *)(skb->cb + sizeof(dma_addr_t)); } static inline struct mwifiex_txinfo *MWIFIEX_SKB_TXCB(struct sk_buff *skb) { - return (struct mwifiex_txinfo *)(skb->cb + sizeof(phys_addr_t)); + return (struct mwifiex_txinfo *)(skb->cb + sizeof(dma_addr_t)); } -static inline phys_addr_t *MWIFIEX_SKB_PACB(struct sk_buff *skb) +static inline void MWIFIEX_SKB_PACB(struct sk_buff *skb, dma_addr_t *buf_pa) { - return (phys_addr_t *)skb->cb; + memcpy(buf_pa, skb->cb, sizeof(dma_addr_t)); } #endif /* !_MWIFIEX_UTIL_H_ */ -- cgit v1.2.3 From fbd7e7ac6db3db8bccf3210d23b5a2a66471c538 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Thu, 3 Jan 2013 21:21:31 -0800 Subject: mwifiex: flush TX ring for PCIe after disconnect or bss stop This patch adds handler to clean PCIe TX rings after disconnect or bss stop is called for PCIe based mwifiex driver. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/main.h | 1 + drivers/net/wireless/mwifiex/pcie.c | 32 ++++++++++++++++++++++++++++++++ drivers/net/wireless/mwifiex/pcie.h | 13 +++++++++++++ drivers/net/wireless/mwifiex/wmm.c | 2 ++ 4 files changed, 48 insertions(+) diff --git a/drivers/net/wireless/mwifiex/main.h b/drivers/net/wireless/mwifiex/main.h index ef02a5bf57b1..51044e3ea89b 100644 --- a/drivers/net/wireless/mwifiex/main.h +++ b/drivers/net/wireless/mwifiex/main.h @@ -602,6 +602,7 @@ struct mwifiex_if_ops { int (*init_fw_port) (struct mwifiex_adapter *); int (*dnld_fw) (struct mwifiex_adapter *, struct mwifiex_fw_image *); void (*card_reset) (struct mwifiex_adapter *); + int (*clean_pcie_ring) (struct mwifiex_adapter *adapter); }; struct mwifiex_adapter { diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index ac20bc4bc1a0..19b5a83f4e7f 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -764,6 +764,37 @@ static int mwifiex_pcie_delete_sleep_cookie_buf(struct mwifiex_adapter *adapter) return 0; } +/* This function flushes the TX buffer descriptor ring + * This function defined as handler is also called while cleaning TXRX + * during disconnect/ bss stop. + */ +static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter) +{ + struct pcie_service_card *card = adapter->card; + u32 rdptr; + + /* Read the TX ring read pointer set by firmware */ + if (mwifiex_read_reg(adapter, REG_TXBD_RDPTR, &rdptr)) { + dev_err(adapter->dev, + "Flush TXBD: failed to read REG_TXBD_RDPTR\n"); + return -1; + } + + if (!mwifiex_pcie_txbd_empty(card, rdptr)) { + card->txbd_flush = 1; + /* write pointer already set at last send + * send dnld-rdy intr again, wait for completion. + */ + if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, + CPU_INTR_DNLD_RDY)) { + dev_err(adapter->dev, + "failed to assert dnld-rdy interrupt.\n"); + return -1; + } + } + return 0; +} + /* * This function sends data buffer to device */ @@ -1995,6 +2026,7 @@ static struct mwifiex_if_ops pcie_ops = { .update_mp_end_port = NULL, .cleanup_mpa_buf = NULL, .init_fw_port = mwifiex_pcie_init_fw_port, + .clean_pcie_ring = mwifiex_clean_pcie_ring_buf, }; /* diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 87201f554d2e..24a39b32a222 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -114,6 +114,7 @@ struct pcie_service_card { struct pci_dev *dev; struct mwifiex_adapter *adapter; + u8 txbd_flush; u32 txbd_wrptr; u32 txbd_rdptr; u32 txbd_ring_size; @@ -146,4 +147,16 @@ struct pcie_service_card { void __iomem *pci_mmap1; }; +static inline int +mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr) +{ + if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) == + (rdptr & MWIFIEX_TXBD_MASK)) && + ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != + (rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + return 1; + + return 0; +} + #endif /* _MWIFIEX_PCIE_H */ diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index 818f871ae987..6d641cbce726 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -568,6 +568,8 @@ mwifiex_clean_txrx(struct mwifiex_private *priv) mwifiex_wmm_delete_all_ralist(priv); memcpy(tos_to_tid, ac_to_tid, sizeof(tos_to_tid)); + if (priv->adapter->if_ops.clean_pcie_ring) + priv->adapter->if_ops.clean_pcie_ring(priv->adapter); spin_unlock_irqrestore(&priv->wmm.ra_list_spinlock, flags); } -- cgit v1.2.3 From e7f767a7d9f809c494bfffffeda2bbdbfec110b4 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Thu, 3 Jan 2013 21:21:32 -0800 Subject: mwifiex: use map/unmap APIs in TX and RX to reduce memcpy This patch is an enhacement to mwifiex_pcie driver to use map/unmap PCI memory APIs. This reduces one memcpy each in TX path and RX path, and enhances throughput. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/11n_aggr.c | 6 +- drivers/net/wireless/mwifiex/pcie.c | 219 +++++++++++++++++++++++++------- drivers/net/wireless/mwifiex/pcie.h | 11 ++ drivers/net/wireless/mwifiex/txrx.c | 6 +- drivers/net/wireless/mwifiex/wmm.c | 6 +- 5 files changed, 193 insertions(+), 55 deletions(-) diff --git a/drivers/net/wireless/mwifiex/11n_aggr.c b/drivers/net/wireless/mwifiex/11n_aggr.c index 68d52cfc1ebd..af8fe6352eed 100644 --- a/drivers/net/wireless/mwifiex/11n_aggr.c +++ b/drivers/net/wireless/mwifiex/11n_aggr.c @@ -278,14 +278,16 @@ mwifiex_11n_aggregate_pkt(struct mwifiex_private *priv, dev_dbg(adapter->dev, "data: -EBUSY is returned\n"); break; case -1: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; dev_err(adapter->dev, "%s: host_to_card failed: %#x\n", __func__, ret); adapter->dbg.num_tx_host_to_card_failure++; mwifiex_write_data_complete(adapter, skb_aggr, 1, ret); return 0; case -EINPROGRESS: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; break; case 0: mwifiex_write_data_complete(adapter, skb_aggr, 1, ret); diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 19b5a83f4e7f..3da89b456c13 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -796,15 +796,15 @@ static int mwifiex_clean_pcie_ring_buf(struct mwifiex_adapter *adapter) } /* - * This function sends data buffer to device + * This function unmaps and frees downloaded data buffer */ -static int -mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) +static int mwifiex_pcie_send_data_complete(struct mwifiex_adapter *adapter) { + const u32 num_tx_buffs = MWIFIEX_MAX_TXRX_BD; + struct sk_buff *skb; + dma_addr_t buf_pa; + u32 wrdoneidx, rdptr, unmap_count = 0; struct pcie_service_card *card = adapter->card; - u32 wrindx, rdptr; - phys_addr_t buf_pa; - __le16 *tmp; if (!mwifiex_pcie_ok_to_access_hw(adapter)) mwifiex_pm_wakeup_card(adapter); @@ -812,34 +812,112 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) /* Read the TX ring read pointer set by firmware */ if (mwifiex_read_reg(adapter, REG_TXBD_RDPTR, &rdptr)) { dev_err(adapter->dev, - "SEND DATA: failed to read REG_TXBD_RDPTR\n"); + "SEND COMP: failed to read REG_TXBD_RDPTR\n"); return -1; } - wrindx = card->txbd_wrptr & MWIFIEX_TXBD_MASK; + dev_dbg(adapter->dev, "SEND COMP: rdptr_prev=0x%x, rdptr=0x%x\n", + card->txbd_rdptr, rdptr); - dev_dbg(adapter->dev, "info: SEND DATA: \n", rdptr, - card->txbd_wrptr); - if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) != - (rdptr & MWIFIEX_TXBD_MASK)) || - ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != - (rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { - struct sk_buff *skb_data; + /* free from previous txbd_rdptr to current txbd_rdptr */ + while (((card->txbd_rdptr & MWIFIEX_TXBD_MASK) != + (rdptr & MWIFIEX_TXBD_MASK)) || + ((card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != + (rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { + wrdoneidx = card->txbd_rdptr & MWIFIEX_TXBD_MASK; + + skb = card->tx_buf_list[wrdoneidx]; + if (skb) { + dev_dbg(adapter->dev, + "SEND COMP: Detach skb %p at txbd_rdidx=%d\n", + skb, wrdoneidx); + MWIFIEX_SKB_PACB(skb, &buf_pa); + pci_unmap_single(card->dev, buf_pa, skb->len, + PCI_DMA_TODEVICE); + + unmap_count++; + + if (card->txbd_flush) + mwifiex_write_data_complete(adapter, skb, 0, + -1); + else + mwifiex_write_data_complete(adapter, skb, 0, 0); + } + + card->tx_buf_list[wrdoneidx] = NULL; + card->txbd_ring[wrdoneidx]->paddr = 0; + card->rxbd_ring[wrdoneidx]->len = 0; + card->rxbd_ring[wrdoneidx]->flags = 0; + card->txbd_rdptr++; + + if ((card->txbd_rdptr & MWIFIEX_TXBD_MASK) == num_tx_buffs) + card->txbd_rdptr = ((card->txbd_rdptr & + MWIFIEX_BD_FLAG_ROLLOVER_IND) ^ + MWIFIEX_BD_FLAG_ROLLOVER_IND); + } + + if (unmap_count) + adapter->data_sent = false; + + if (card->txbd_flush) { + if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) == + (card->txbd_rdptr & MWIFIEX_TXBD_MASK)) && + ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != + (card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + card->txbd_flush = 0; + else + mwifiex_clean_pcie_ring_buf(adapter); + } + + return 0; +} + +/* This function sends data buffer to device. First 4 bytes of payload + * are filled with payload length and payload type. Then this payload + * is mapped to PCI device memory. Tx ring pointers are advanced accordingly. + * Download ready interrupt to FW is deffered if Tx ring is not full and + * additional payload can be accomodated. + */ +static int +mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb, + struct mwifiex_tx_param *tx_param) +{ + struct pcie_service_card *card = adapter->card; + u32 wrindx; + int ret; + dma_addr_t buf_pa; + __le16 *tmp; + + if (!(skb->data && skb->len)) { + dev_err(adapter->dev, "%s(): invalid parameter <%p, %#x>\n", + __func__, skb->data, skb->len); + return -1; + } + + if (!mwifiex_pcie_ok_to_access_hw(adapter)) + mwifiex_pm_wakeup_card(adapter); + + dev_dbg(adapter->dev, "info: SEND DATA: \n", + card->txbd_rdptr, card->txbd_wrptr); + if (mwifiex_pcie_txbd_not_full(card)) { u8 *payload; adapter->data_sent = true; - skb_data = card->tx_buf_list[wrindx]; - memcpy(skb_data->data, skb->data, skb->len); - payload = skb_data->data; + payload = skb->data; tmp = (__le16 *)&payload[0]; *tmp = cpu_to_le16((u16)skb->len); tmp = (__le16 *)&payload[2]; *tmp = cpu_to_le16(MWIFIEX_TYPE_DATA); - skb_put(skb_data, MWIFIEX_RX_DATA_BUF_SIZE - skb_data->len); - skb_trim(skb_data, skb->len); - MWIFIEX_SKB_PACB(skb_data, &buf_pa); + + if (mwifiex_map_pci_memory(adapter, skb, skb->len , + PCI_DMA_TODEVICE)) + return -1; + + wrindx = card->txbd_wrptr & MWIFIEX_TXBD_MASK; + MWIFIEX_SKB_PACB(skb, &buf_pa); + card->tx_buf_list[wrindx] = skb; card->txbd_ring[wrindx]->paddr = buf_pa; - card->txbd_ring[wrindx]->len = (u16)skb_data->len; + card->txbd_ring[wrindx]->len = (u16)skb->len; card->txbd_ring[wrindx]->flags = MWIFIEX_BD_FLAG_FIRST_DESC | MWIFIEX_BD_FLAG_LAST_DESC; @@ -854,19 +932,28 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) card->txbd_wrptr)) { dev_err(adapter->dev, "SEND DATA: failed to write REG_TXBD_WRPTR\n"); - return 0; + ret = -1; + goto done_unmap; } - - /* Send the TX ready interrupt */ - if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, - CPU_INTR_DNLD_RDY)) { - dev_err(adapter->dev, - "SEND DATA: failed to assert door-bell intr\n"); - return -1; + if ((mwifiex_pcie_txbd_not_full(card)) && + tx_param->next_pkt_len) { + /* have more packets and TxBD still can hold more */ + dev_dbg(adapter->dev, + "SEND DATA: delay dnld-rdy interrupt.\n"); + adapter->data_sent = false; + } else { + /* Send the TX ready interrupt */ + if (mwifiex_write_reg(adapter, PCIE_CPU_INT_EVENT, + CPU_INTR_DNLD_RDY)) { + dev_err(adapter->dev, + "SEND DATA: failed to assert dnld-rdy interrupt.\n"); + ret = -1; + goto done_unmap; + } } dev_dbg(adapter->dev, "info: SEND DATA: Updated and sent packet to firmware successfully\n", - rdptr, card->txbd_wrptr); + card->txbd_rdptr, card->txbd_wrptr); } else { dev_dbg(adapter->dev, "info: TX Ring full, can't send packets to fw\n"); @@ -879,7 +966,15 @@ mwifiex_pcie_send_data(struct mwifiex_adapter *adapter, struct sk_buff *skb) return -EBUSY; } - return 0; + return -EINPROGRESS; +done_unmap: + MWIFIEX_SKB_PACB(skb, &buf_pa); + pci_unmap_single(card->dev, buf_pa, skb->len, PCI_DMA_TODEVICE); + card->tx_buf_list[wrindx] = NULL; + card->txbd_ring[wrindx]->paddr = 0; + card->txbd_ring[wrindx]->len = 0; + card->txbd_ring[wrindx]->flags = 0; + return ret; } /* @@ -890,9 +985,13 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; u32 wrptr, rd_index; + dma_addr_t buf_pa; int ret = 0; struct sk_buff *skb_tmp = NULL; + if (!mwifiex_pcie_ok_to_access_hw(adapter)) + mwifiex_pm_wakeup_card(adapter); + /* Read the RX ring Write pointer set by firmware */ if (mwifiex_read_reg(adapter, REG_RXBD_WRPTR, &wrptr)) { dev_err(adapter->dev, @@ -900,6 +999,7 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) ret = -1; goto done; } + card->rxbd_wrptr = wrptr; while (((wrptr & MWIFIEX_RXBD_MASK) != (card->rxbd_rdptr & MWIFIEX_RXBD_MASK)) || @@ -907,27 +1007,50 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) (card->rxbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) { struct sk_buff *skb_data; u16 rx_len; + __le16 pkt_len; rd_index = card->rxbd_rdptr & MWIFIEX_RXBD_MASK; skb_data = card->rx_buf_list[rd_index]; + MWIFIEX_SKB_PACB(skb_data, &buf_pa); + pci_unmap_single(card->dev, buf_pa, MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE); + card->rx_buf_list[rd_index] = NULL; + /* Get data length from interface header - - first byte is len, second byte is type */ - rx_len = *((u16 *)skb_data->data); + * first 2 bytes for len, next 2 bytes is for type + */ + pkt_len = *((__le16 *)skb_data->data); + rx_len = le16_to_cpu(pkt_len); + skb_put(skb_data, rx_len); dev_dbg(adapter->dev, "info: RECV DATA: Rd=%#x, Wr=%#x, Len=%d\n", card->rxbd_rdptr, wrptr, rx_len); - skb_tmp = dev_alloc_skb(rx_len); + skb_pull(skb_data, INTF_HEADER_LEN); + mwifiex_handle_rx_packet(adapter, skb_data); + + skb_tmp = dev_alloc_skb(MWIFIEX_RX_DATA_BUF_SIZE); if (!skb_tmp) { - dev_dbg(adapter->dev, - "info: Failed to alloc skb for RX\n"); - ret = -EBUSY; - goto done; + dev_err(adapter->dev, + "Unable to allocate skb.\n"); + return -ENOMEM; } - skb_put(skb_tmp, rx_len); + if (mwifiex_map_pci_memory(adapter, skb_tmp, + MWIFIEX_RX_DATA_BUF_SIZE, + PCI_DMA_FROMDEVICE)) + return -1; + + MWIFIEX_SKB_PACB(skb_tmp, &buf_pa); + + dev_dbg(adapter->dev, + "RECV DATA: Attach new sk_buff %p at rxbd_rdidx=%d\n", + skb_tmp, rd_index); + card->rx_buf_list[rd_index] = skb_tmp; + card->rxbd_ring[rd_index]->paddr = buf_pa; + card->rxbd_ring[rd_index]->len = skb_tmp->len; + card->rxbd_ring[rd_index]->flags = 0; - memcpy(skb_tmp->data, skb_data->data + INTF_HEADER_LEN, rx_len); if ((++card->rxbd_rdptr & MWIFIEX_RXBD_MASK) == MWIFIEX_MAX_TXRX_BD) { card->rxbd_rdptr = ((card->rxbd_rdptr & @@ -955,12 +1078,10 @@ static int mwifiex_pcie_process_recv_data(struct mwifiex_adapter *adapter) } dev_dbg(adapter->dev, "info: RECV DATA: Rcvd packet from fw successfully\n"); - mwifiex_handle_rx_packet(adapter, skb_tmp); + card->rxbd_wrptr = wrptr; } done: - if (ret && skb_tmp) - dev_kfree_skb_any(skb_tmp); return ret; } @@ -1732,10 +1853,10 @@ static int mwifiex_process_int_status(struct mwifiex_adapter *adapter) while (pcie_ireg & HOST_INTR_MASK) { if (pcie_ireg & HOST_INTR_DNLD_DONE) { pcie_ireg &= ~HOST_INTR_DNLD_DONE; - if (adapter->data_sent) { - dev_dbg(adapter->dev, "info: DATA sent intr\n"); - adapter->data_sent = false; - } + dev_dbg(adapter->dev, "info: TX DNLD Done\n"); + ret = mwifiex_pcie_send_data_complete(adapter); + if (ret) + return ret; } if (pcie_ireg & HOST_INTR_UPLD_RDY) { pcie_ireg &= ~HOST_INTR_UPLD_RDY; @@ -1812,7 +1933,7 @@ static int mwifiex_pcie_host_to_card(struct mwifiex_adapter *adapter, u8 type, } if (type == MWIFIEX_TYPE_DATA) - return mwifiex_pcie_send_data(adapter, skb); + return mwifiex_pcie_send_data(adapter, skb, tx_param); else if (type == MWIFIEX_TYPE_CMD) return mwifiex_pcie_send_cmd(adapter, skb); diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 24a39b32a222..37eeb2ca6b29 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -159,4 +159,15 @@ mwifiex_pcie_txbd_empty(struct pcie_service_card *card, u32 rdptr) return 0; } +static inline int +mwifiex_pcie_txbd_not_full(struct pcie_service_card *card) +{ + if (((card->txbd_wrptr & MWIFIEX_TXBD_MASK) != + (card->txbd_rdptr & MWIFIEX_TXBD_MASK)) || + ((card->txbd_wrptr & MWIFIEX_BD_FLAG_ROLLOVER_IND) != + (card->txbd_rdptr & MWIFIEX_BD_FLAG_ROLLOVER_IND))) + return 1; + + return 0; +} #endif /* _MWIFIEX_PCIE_H */ diff --git a/drivers/net/wireless/mwifiex/txrx.c b/drivers/net/wireless/mwifiex/txrx.c index 8c80024c30ff..296faec14365 100644 --- a/drivers/net/wireless/mwifiex/txrx.c +++ b/drivers/net/wireless/mwifiex/txrx.c @@ -117,14 +117,16 @@ int mwifiex_process_tx(struct mwifiex_private *priv, struct sk_buff *skb, dev_dbg(adapter->dev, "data: -EBUSY is returned\n"); break; case -1: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; dev_err(adapter->dev, "mwifiex_write_data_async failed: 0x%X\n", ret); adapter->dbg.num_tx_host_to_card_failure++; mwifiex_write_data_complete(adapter, skb, 0, ret); break; case -EINPROGRESS: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; break; case 0: mwifiex_write_data_complete(adapter, skb, 0, ret); diff --git a/drivers/net/wireless/mwifiex/wmm.c b/drivers/net/wireless/mwifiex/wmm.c index 6d641cbce726..135d96df2063 100644 --- a/drivers/net/wireless/mwifiex/wmm.c +++ b/drivers/net/wireless/mwifiex/wmm.c @@ -1208,13 +1208,15 @@ mwifiex_send_processed_packet(struct mwifiex_private *priv, ra_list_flags); break; case -1: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; dev_err(adapter->dev, "host_to_card failed: %#x\n", ret); adapter->dbg.num_tx_host_to_card_failure++; mwifiex_write_data_complete(adapter, skb, 0, ret); break; case -EINPROGRESS: - adapter->data_sent = false; + if (adapter->iface_type != MWIFIEX_PCIE) + adapter->data_sent = false; default: break; } -- cgit v1.2.3 From 4a484cffc5e1836114e9556f7c704412d491200c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 9 Jan 2013 10:22:07 +0100 Subject: regulatory: fix uevent The uevent callback doesn't protect its access to last_request, which now causes a warning since the conversion to get_last_request(). Fix this by allowing to use RCU protection for last_request. Reported-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/wireless/reg.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 0b35de001937..2193f62bb8ae 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -140,8 +140,8 @@ static void rcu_free_regdom(const struct ieee80211_regdomain *r) static struct regulatory_request *get_last_request(void) { - return rcu_dereference_protected(last_request, - lockdep_is_held(®_mutex)); + return rcu_dereference_check(last_request, + lockdep_is_held(®_mutex)); } /* Used to queue up regulatory hints */ @@ -2250,14 +2250,21 @@ int set_regdom(const struct ieee80211_regdomain *rd) #ifdef CONFIG_HOTPLUG int reg_device_uevent(struct device *dev, struct kobj_uevent_env *env) { - struct regulatory_request *lr = get_last_request(); + struct regulatory_request *lr; + u8 alpha2[2]; + bool add = false; + rcu_read_lock(); + lr = get_last_request(); if (lr && !lr->processed) { - if (add_uevent_var(env, "COUNTRY=%c%c", - lr->alpha2[0], lr->alpha2[1])) - return -ENOMEM; + memcpy(alpha2, lr->alpha2, 2); + add = true; } + rcu_read_unlock(); + if (add) + return add_uevent_var(env, "COUNTRY=%c%c", + alpha2[0], alpha2[1]); return 0; } #else -- cgit v1.2.3 From 2d31986764926630a6df72123a5e217219b32594 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 9 Jan 2013 12:01:38 +0100 Subject: regulatory: fix restore_regulatory_settings My commit 379b82f4c9dc6e67bf61aa61b096c06a2f320f60 ("regulatory: pass new regdomain to reset function") broke the restore_regulatory_settings() function due to a logic change. Consider this change: - reset_regdomains(true); - cfg80211_regdomain = cfg80211_world_regdom; + reset_regdomains(true, cfg80211_world_regdom); This looks innocent enough, until you realise that the called function (reset_regdomains) also resets the cfg80211_world_regdom pointer, so that the old version of the code would use the new object it pointed to and the new version of the code uses the old object. This lead to a double-free of this object. Since reset_regdomains() sets it to &world_regdom, use that directly. Reported-by: Sujith Manoharan Tested-by: Sujith Manoharan Reported-by: Bob Copeland Reported-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/wireless/reg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2193f62bb8ae..8c114e8a9135 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1848,7 +1848,7 @@ static void restore_regulatory_settings(bool reset_user) mutex_lock(&cfg80211_mutex); mutex_lock(®_mutex); - reset_regdomains(true, cfg80211_world_regdom); + reset_regdomains(true, &world_regdom); restore_alpha2(alpha2, reset_user); /* -- cgit v1.2.3 From dbccd791a3fbbdac12c33834b73beff3984988e9 Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Tue, 11 Dec 2012 08:51:19 +0100 Subject: Bluetooth: Fix sending HCI commands after reset After sending reset command wait for its command complete event before sending next command. Some chips sends CC event for command received before reset if reset was send before chip replied with CC. This is also required by specification that host shall not send additional HCI commands before receiving CC for reset. < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 18.404612 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.405850 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.406079 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.407864 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.408062 > HCI Event: Command Complete (0x0e) plen 12 [hci0] 18.408835 Signed-off-by: Szymon Janc Cc: stable@vger.kernel.org Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 705078a0cc39..81b44481d0d9 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2688,7 +2688,7 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) if (ev->opcode != HCI_OP_NOP) del_timer(&hdev->cmd_timer); - if (ev->ncmd) { + if (ev->ncmd && !test_bit(HCI_RESET, &hdev->flags)) { atomic_set(&hdev->cmd_cnt, 1); if (!skb_queue_empty(&hdev->cmd_q)) queue_work(hdev->workqueue, &hdev->cmd_work); -- cgit v1.2.3 From eed307e290b96636def331375e065aca43f9069a Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Tue, 11 Dec 2012 11:41:20 +0800 Subject: Bluetooth: Add support for IMC Networks [13d3:3393] Add support for the AR9462 chip T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3393 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index b00000e8aef6..3418bf988d01 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -81,6 +81,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0489, 0xe057) }, + { USB_DEVICE(0x13d3, 0x3393) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -108,6 +109,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a1d4ede5b892..acd5be40fc04 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -139,6 +139,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 2c262b2a5235b7f5b18d4d58394511f76371d7cb Mon Sep 17 00:00:00 2001 From: Daniel Schaal Date: Sat, 29 Dec 2012 11:14:34 +0100 Subject: Bluetooth: Add support for GC-WB300D PCIe [04ca:3006] to ath3k. T: Bus=02 Lev=02 Prnt=02 Port=06 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3006 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Daniel Schaal Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 3418bf988d01..afe9d8e8901d 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -77,6 +77,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, + { USB_DEVICE(0x04CA, 0x3006) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, @@ -105,6 +106,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index acd5be40fc04..83ff97089e31 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -135,6 +135,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, -- cgit v1.2.3 From 3a61eda81ebcfc006ebb1496764299d53e5bf67f Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 3 Jan 2013 12:24:59 +0800 Subject: Bluetooth: Add support for Foxconn / Hon Hai [0489:e04e] Add support for the AR9462 chip T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e04e Rev=00.02 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index afe9d8e8901d..47fc6b5c6488 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -83,6 +83,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0930, 0x0219) }, { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, + { USB_DEVICE(0x0489, 0xe04e) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -112,6 +113,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 83ff97089e31..9a52f8b6bfd9 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -141,6 +141,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 2582d529c44d12502a700f1c3db062b9f44679bc Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 3 Jan 2013 12:25:00 +0800 Subject: Bluetooth: Add support for Foxconn / Hon Hai [0489:e056] Add support for the AR9462 chip T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e056 Rev=00.01 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 47fc6b5c6488..be178949bc8b 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -84,6 +84,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0489, 0xe057) }, { USB_DEVICE(0x13d3, 0x3393) }, { USB_DEVICE(0x0489, 0xe04e) }, + { USB_DEVICE(0x0489, 0xe056) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -114,6 +115,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 9a52f8b6bfd9..3f6a993539e8 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -142,6 +142,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, -- cgit v1.2.3 From 72a525cbb8037ecf8663720b7087e8e6fc77a49a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sun, 6 Jan 2013 21:48:50 +0100 Subject: ssb: add place for serial flash driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: John W. Linville --- drivers/ssb/Kconfig | 5 +++++ drivers/ssb/Makefile | 1 + drivers/ssb/driver_chipcommon_sflash.c | 18 ++++++++++++++++++ drivers/ssb/driver_mipscore.c | 3 ++- drivers/ssb/ssb_private.h | 11 +++++++++++ 5 files changed, 37 insertions(+), 1 deletion(-) create mode 100644 drivers/ssb/driver_chipcommon_sflash.c diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index ff3c8a21f10d..f7305e2fddcc 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -136,6 +136,11 @@ config SSB_DRIVER_MIPS If unsure, say N +config SSB_SFLASH + bool "SSB serial flash support" + depends on SSB_DRIVER_MIPS && BROKEN + default y + # Assumption: We are on embedded, if we compile the MIPS core. config SSB_EMBEDDED bool diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile index 9159ba77c388..b1ddc116d387 100644 --- a/drivers/ssb/Makefile +++ b/drivers/ssb/Makefile @@ -11,6 +11,7 @@ ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o # built-in drivers ssb-y += driver_chipcommon.o ssb-y += driver_chipcommon_pmu.o +ssb-$(CONFIG_SSB_SFLASH) += driver_chipcommon_sflash.o ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c new file mode 100644 index 000000000000..866269774e86 --- /dev/null +++ b/drivers/ssb/driver_chipcommon_sflash.c @@ -0,0 +1,18 @@ +/* + * Sonics Silicon Backplane + * ChipCommon serial flash interface + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include + +#include "ssb_private.h" + +/* Initialize serial flash access */ +int ssb_sflash_init(struct ssb_chipcommon *cc) +{ + pr_err("Serial flash support is not implemented yet!\n"); + + return -ENOTSUPP; +} diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c index 5bd05b136d22..2a7684c90243 100644 --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c @@ -203,7 +203,8 @@ static void ssb_mips_flash_detect(struct ssb_mipscore *mcore) switch (bus->chipco.capabilities & SSB_CHIPCO_CAP_FLASHT) { case SSB_CHIPCO_FLASHT_STSER: case SSB_CHIPCO_FLASHT_ATSER: - pr_err("Serial flash not supported\n"); + pr_debug("Found serial flash\n"); + ssb_sflash_init(&bus->chipco); break; case SSB_CHIPCO_FLASHT_PARA: pr_debug("Found parallel flash\n"); diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h index 6c10b66c796c..77d942630750 100644 --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -217,6 +217,17 @@ extern u32 ssb_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks); extern u32 ssb_chipco_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); +/* driver_chipcommon_sflash.c */ +#ifdef CONFIG_SSB_SFLASH +int ssb_sflash_init(struct ssb_chipcommon *cc); +#else +static inline int ssb_sflash_init(struct ssb_chipcommon *cc) +{ + pr_err("Serial flash not supported\n"); + return 0; +} +#endif /* CONFIG_SSB_SFLASH */ + #ifdef CONFIG_SSB_DRIVER_EXTIF extern u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks); extern u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms); -- cgit v1.2.3 From 4656b8f680b4405d68a84e6223b1709b3e1944a6 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 7 Jan 2013 13:53:46 +0530 Subject: ath9k_hw: Do not enable IQ-CAL for half/quarter rates IQ calibration doesn't complete and times out for half/quarter rates, so skip it correctly. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index fa67e84d51ea..61caf1cbd77a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -1013,7 +1013,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, } } - if (!(ah->enabled_cals & TX_IQ_CAL)) + if ((IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan)) || + !(ah->enabled_cals & TX_IQ_CAL)) goto skip_tx_iqcal; /* Do Tx IQ Calibration */ @@ -1040,12 +1041,10 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal) ar9003_mci_init_cal_req(ah, &is_reusable); - if (!(IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))) { - txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); - udelay(5); - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); - } + txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); + udelay(5); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); skip_tx_iqcal: if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { -- cgit v1.2.3 From dfcca60b884185cc1e12de932156bd806d896747 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 7 Jan 2013 13:53:47 +0530 Subject: ath9k_hw: Fix MCI init for AGC calibration When AGC calibration is to be done, a GPM message with the payload, MCI_GPM_WLAN_CAL_REQ has to be sent. Currently this falls within the IQ-CAL code block which is incorrect. Fix this by using a separate variable to decide when IQ-CAL is to be done separately and call ar9003_mci_init_cal_req correctly. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 61caf1cbd77a..15f9b89fcc62 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -967,7 +967,7 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, struct ath9k_hw_cal_data *caldata = ah->caldata; bool txiqcal_done = false, txclcal_done = false; bool is_reusable = true, status = true; - bool run_rtt_cal = false, run_agc_cal; + bool run_rtt_cal = false, run_agc_cal, sep_iq_cal = false; bool rtt = !!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT); u32 agc_ctrl = 0, agc_supp_cals = AR_PHY_AGC_CONTROL_OFFSET_CAL | AR_PHY_AGC_CONTROL_FLTR_CAL | @@ -1034,19 +1034,22 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, REG_CLR_BIT(ah, AR_PHY_TX_IQCAL_CONTROL_0, AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL); txiqcal_done = run_agc_cal = true; - goto skip_tx_iqcal; - } else if (caldata && !caldata->done_txiqcal_once) + } else if (caldata && !caldata->done_txiqcal_once) { run_agc_cal = true; + sep_iq_cal = true; + } +skip_tx_iqcal: if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal) ar9003_mci_init_cal_req(ah, &is_reusable); - txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); - udelay(5); - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); + if (sep_iq_cal) { + txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); + udelay(5); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); + } -skip_tx_iqcal: if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { /* Calibrate the AGC */ REG_WRITE(ah, AR_PHY_AGC_CONTROL, -- cgit v1.2.3 From 96da6fdd5ae28568be63ccf1f70b14a72135d493 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 7 Jan 2013 14:43:33 +0530 Subject: ath9k_hw: Use helper routines to simplify ar9003_hw_init_cal() Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 92 ++++++++++++++++----------- drivers/net/wireless/ath/ath9k/hw.h | 1 + 2 files changed, 55 insertions(+), 38 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 15f9b89fcc62..9221f32a322e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -960,22 +960,68 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g) AR_PHY_65NM_RXRF_AGC_AGC_CAL_OVR, 0); } +static void ar9003_hw_do_manual_peak_cal(struct ath_hw *ah, + struct ath9k_channel *chan) +{ + int i; + + if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah)) + return; + + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->rxchainmask & (1 << i))) + continue; + ar9003_hw_manual_peak_cal(ah, i, IS_CHAN_2GHZ(chan)); + } +} + +static void ar9003_hw_cl_cal_post_proc(struct ath_hw *ah, bool is_reusable) +{ + u32 cl_idx[AR9300_MAX_CHAINS] = { AR_PHY_CL_TAB_0, + AR_PHY_CL_TAB_1, + AR_PHY_CL_TAB_2 }; + struct ath9k_hw_cal_data *caldata = ah->caldata; + bool txclcal_done = false; + int i, j; + + if (!caldata || !(ah->enabled_cals & TX_CL_CAL)) + return; + + txclcal_done = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & + AR_PHY_AGC_CONTROL_CLC_SUCCESS); + + if (caldata->done_txclcal_once) { + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->txchainmask & (1 << i))) + continue; + for (j = 0; j < MAX_CL_TAB_ENTRY; j++) + REG_WRITE(ah, CL_TAB_ENTRY(cl_idx[i]), + caldata->tx_clcal[i][j]); + } + } else if (is_reusable && txclcal_done) { + for (i = 0; i < AR9300_MAX_CHAINS; i++) { + if (!(ah->txchainmask & (1 << i))) + continue; + for (j = 0; j < MAX_CL_TAB_ENTRY; j++) + caldata->tx_clcal[i][j] = + REG_READ(ah, CL_TAB_ENTRY(cl_idx[i])); + } + caldata->done_txclcal_once = true; + } +} + static bool ar9003_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) { struct ath_common *common = ath9k_hw_common(ah); struct ath9k_hw_cal_data *caldata = ah->caldata; - bool txiqcal_done = false, txclcal_done = false; + bool txiqcal_done = false; bool is_reusable = true, status = true; bool run_rtt_cal = false, run_agc_cal, sep_iq_cal = false; bool rtt = !!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT); u32 agc_ctrl = 0, agc_supp_cals = AR_PHY_AGC_CONTROL_OFFSET_CAL | AR_PHY_AGC_CONTROL_FLTR_CAL | AR_PHY_AGC_CONTROL_PKDET_CAL; - int i, j; - u32 cl_idx[AR9300_MAX_CHAINS] = { AR_PHY_CL_TAB_0, - AR_PHY_CL_TAB_1, - AR_PHY_CL_TAB_2 }; if (rtt) { if (!ar9003_hw_rtt_restore(ah, chan)) @@ -1060,14 +1106,8 @@ skip_tx_iqcal: status = ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL, 0, AH_WAIT_TIMEOUT); - if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) { - for (i = 0; i < AR9300_MAX_CHAINS; i++) { - if (!(ah->rxchainmask & (1 << i))) - continue; - ar9003_hw_manual_peak_cal(ah, i, - IS_CHAN_2GHZ(chan)); - } - } + + ar9003_hw_do_manual_peak_cal(ah, chan); } if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal) @@ -1092,31 +1132,7 @@ skip_tx_iqcal: else if (caldata && caldata->done_txiqcal_once) ar9003_hw_tx_iq_cal_reload(ah); -#define CL_TAB_ENTRY(reg_base) (reg_base + (4 * j)) - if (caldata && (ah->enabled_cals & TX_CL_CAL)) { - txclcal_done = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & - AR_PHY_AGC_CONTROL_CLC_SUCCESS); - if (caldata->done_txclcal_once) { - for (i = 0; i < AR9300_MAX_CHAINS; i++) { - if (!(ah->txchainmask & (1 << i))) - continue; - for (j = 0; j < MAX_CL_TAB_ENTRY; j++) - REG_WRITE(ah, CL_TAB_ENTRY(cl_idx[i]), - caldata->tx_clcal[i][j]); - } - } else if (is_reusable && txclcal_done) { - for (i = 0; i < AR9300_MAX_CHAINS; i++) { - if (!(ah->txchainmask & (1 << i))) - continue; - for (j = 0; j < MAX_CL_TAB_ENTRY; j++) - caldata->tx_clcal[i][j] = - REG_READ(ah, - CL_TAB_ENTRY(cl_idx[i])); - } - caldata->done_txclcal_once = true; - } - } -#undef CL_TAB_ENTRY + ar9003_hw_cl_cal_post_proc(ah, is_reusable); if (run_rtt_cal && caldata) { if (is_reusable) { diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 38c5a8702fb2..39a226f5eda4 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -397,6 +397,7 @@ enum ath9k_int { #define MAX_RTT_TABLE_ENTRY 6 #define MAX_IQCAL_MEASUREMENT 8 #define MAX_CL_TAB_ENTRY 16 +#define CL_TAB_ENTRY(reg_base) (reg_base + (4 * j)) struct ath9k_hw_cal_data { u16 channel; -- cgit v1.2.3 From 9b0b11fb1e286e03ce911b94844952edd05f554e Mon Sep 17 00:00:00 2001 From: Nishant Sarmukadam Date: Tue, 8 Jan 2013 10:16:05 +0530 Subject: mwl8k: Disable tx_wait completion Whenever TX ring is drained, priv->tx_wait still points to a valid completion. Making sure that it points to NULL before returning from the mwl8k_tx_wait_empty check. Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index c4d287b48e64..04442c6290a6 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1588,6 +1588,7 @@ static int mwl8k_tx_wait_empty(struct ieee80211_hw *hw) rc = -ETIMEDOUT; } + priv->tx_wait = NULL; spin_unlock_bh(&priv->tx_lock); return rc; -- cgit v1.2.3 From 0dd13a48a913f096cb44dbcb6c1daebd94b2cf84 Mon Sep 17 00:00:00 2001 From: Yogesh Ashok Powar Date: Tue, 8 Jan 2013 10:16:37 +0530 Subject: mwl8k: Delete ampdu streams with state AMPDU_STREAM_NEW in sta remove When a station deauths, we do not delete the streams with state AMPDU_STREAM_NEW and these remain created forever. Fix this issue by removing such streams in the driver Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Ashok Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 04442c6290a6..fc4d4a442139 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3935,7 +3935,30 @@ static int mwl8k_cmd_set_new_stn_del(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u8 *addr) { struct mwl8k_cmd_set_new_stn *cmd; - int rc; + struct mwl8k_priv *priv = hw->priv; + int rc, i; + u8 idx; + + spin_lock(&priv->stream_lock); + /* Destroy any active ampdu streams for this sta */ + for (i = 0; i < MWL8K_NUM_AMPDU_STREAMS; i++) { + struct mwl8k_ampdu_stream *s; + s = &priv->ampdu[i]; + if (s->state != AMPDU_NO_STREAM) { + if (memcmp(s->sta->addr, addr, ETH_ALEN) == 0) { + if (s->state == AMPDU_STREAM_ACTIVE) { + idx = s->idx; + spin_unlock(&priv->stream_lock); + mwl8k_destroy_ba(hw, idx); + spin_lock(&priv->stream_lock); + } else if (s->state == AMPDU_STREAM_NEW) { + mwl8k_remove_stream(hw, s); + } + } + } + } + + spin_unlock(&priv->stream_lock); cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); if (cmd == NULL) -- cgit v1.2.3 From 4850b6d355b457738fe7d872c833474dbec25304 Mon Sep 17 00:00:00 2001 From: Nishant Sarmukadam Date: Tue, 8 Jan 2013 12:10:53 +0530 Subject: mwl8k: Wake up queues in mwl8k_start If queues are stopped in mwl8k_stop, these should be started in mwl8k_start Signed-off-by: Nishant Sarmukadam Signed-off-by: Yogesh Powar Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index fc4d4a442139..a9c078899252 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -4531,6 +4531,8 @@ static int mwl8k_start(struct ieee80211_hw *hw) priv->irq = -1; tasklet_disable(&priv->poll_tx_task); tasklet_disable(&priv->poll_rx_task); + } else { + ieee80211_wake_queues(hw); } return rc; -- cgit v1.2.3 From 3a6a62fbc99e1b49a5f7b9d926a7061cc623a1c2 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 8 Jan 2013 20:57:51 +0530 Subject: ath9k_hw: Update initvals for QCA955x Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- .../net/wireless/ath/ath9k/ar955x_1p0_initvals.h | 132 ++++++++++----------- 1 file changed, 66 insertions(+), 66 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h index df97f21c52dc..ccc5b6c99add 100644 --- a/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar955x_1p0_initvals.h @@ -23,16 +23,16 @@ static const u32 ar955x_1p0_radio_postamble[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ {0x00016098, 0xd2dd5554, 0xd2dd5554, 0xd28b3330, 0xd28b3330}, - {0x0001609c, 0x0a566f3a, 0x0a566f3a, 0x06345f2a, 0x06345f2a}, - {0x000160ac, 0xa4647c00, 0xa4647c00, 0xa4646800, 0xa4646800}, - {0x000160b0, 0x01885f52, 0x01885f52, 0x04accf3a, 0x04accf3a}, - {0x00016104, 0xb7a00001, 0xb7a00001, 0xb7a00001, 0xb7a00001}, + {0x0001609c, 0x0a566f3a, 0x0a566f3a, 0x0a566f3a, 0x0a566f3a}, + {0x000160ac, 0xa4647c00, 0xa4647c00, 0x24647c00, 0x24647c00}, + {0x000160b0, 0x01885f52, 0x01885f52, 0x01885f52, 0x01885f52}, + {0x00016104, 0xb7a00000, 0xb7a00000, 0xb7a00001, 0xb7a00001}, {0x0001610c, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000}, {0x00016140, 0x10804008, 0x10804008, 0x10804008, 0x10804008}, - {0x00016504, 0xb7a00001, 0xb7a00001, 0xb7a00001, 0xb7a00001}, + {0x00016504, 0xb7a00000, 0xb7a00000, 0xb7a00001, 0xb7a00001}, {0x0001650c, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000}, {0x00016540, 0x10804008, 0x10804008, 0x10804008, 0x10804008}, - {0x00016904, 0xb7a00001, 0xb7a00001, 0xb7a00001, 0xb7a00001}, + {0x00016904, 0xb7a00000, 0xb7a00000, 0xb7a00001, 0xb7a00001}, {0x0001690c, 0xc0000000, 0xc0000000, 0xc0000000, 0xc0000000}, {0x00016940, 0x10804008, 0x10804008, 0x10804008, 0x10804008}, }; @@ -69,15 +69,15 @@ static const u32 ar955x_1p0_baseband_postamble[][5] = { {0x0000a204, 0x005c0ec0, 0x005c0ec4, 0x005c0ec4, 0x005c0ec0}, {0x0000a208, 0x00000104, 0x00000104, 0x00000004, 0x00000004}, {0x0000a22c, 0x07e26a2f, 0x07e26a2f, 0x01026a2f, 0x01026a2f}, - {0x0000a230, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b}, + {0x0000a230, 0x0000400a, 0x00004014, 0x00004016, 0x0000400b}, {0x0000a234, 0x00000fff, 0x10000fff, 0x10000fff, 0x00000fff}, {0x0000a238, 0xffb01018, 0xffb01018, 0xffb01018, 0xffb01018}, {0x0000a250, 0x00000000, 0x00000000, 0x00000210, 0x00000108}, {0x0000a254, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898}, {0x0000a258, 0x02020002, 0x02020002, 0x02020002, 0x02020002}, - {0x0000a25c, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e}, + {0x0000a25c, 0x01000e0e, 0x01000e0e, 0x01010e0e, 0x01010e0e}, {0x0000a260, 0x0a021501, 0x0a021501, 0x3a021501, 0x3a021501}, - {0x0000a264, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e}, + {0x0000a264, 0x00000e0e, 0x00000e0e, 0x01000e0e, 0x01000e0e}, {0x0000a280, 0x00000007, 0x00000007, 0x0000000b, 0x0000000b}, {0x0000a284, 0x00000000, 0x00000000, 0x00000010, 0x00000010}, {0x0000a288, 0x00000110, 0x00000110, 0x00000110, 0x00000110}, @@ -125,7 +125,7 @@ static const u32 ar955x_1p0_radio_core[][2] = { {0x00016094, 0x00000000}, {0x000160a0, 0x0a108ffe}, {0x000160a4, 0x812fc370}, - {0x000160a8, 0x423c8000}, + {0x000160a8, 0x423c8100}, {0x000160b4, 0x92480080}, {0x000160c0, 0x006db6d0}, {0x000160c4, 0x6db6db60}, @@ -134,7 +134,7 @@ static const u32 ar955x_1p0_radio_core[][2] = { {0x00016100, 0x11999601}, {0x00016108, 0x00080010}, {0x00016144, 0x02084080}, - {0x00016148, 0x000080c0}, + {0x00016148, 0x00008040}, {0x00016280, 0x01800804}, {0x00016284, 0x00038dc5}, {0x00016288, 0x00000000}, @@ -178,7 +178,7 @@ static const u32 ar955x_1p0_radio_core[][2] = { {0x00016500, 0x11999601}, {0x00016508, 0x00080010}, {0x00016544, 0x02084080}, - {0x00016548, 0x000080c0}, + {0x00016548, 0x00008040}, {0x00016780, 0x00000000}, {0x00016784, 0x00000000}, {0x00016788, 0x00400705}, @@ -218,7 +218,7 @@ static const u32 ar955x_1p0_radio_core[][2] = { {0x00016900, 0x11999601}, {0x00016908, 0x00080010}, {0x00016944, 0x02084080}, - {0x00016948, 0x000080c0}, + {0x00016948, 0x00008040}, {0x00016b80, 0x00000000}, {0x00016b84, 0x00000000}, {0x00016b88, 0x00400705}, @@ -245,9 +245,9 @@ static const u32 ar955x_1p0_radio_core[][2] = { static const u32 ar955x_1p0_modes_xpa_tx_gain_table[][9] = { /* Addr 5G_HT20_L 5G_HT40_L 5G_HT20_M 5G_HT40_M 5G_HT20_H 5G_HT40_H 2G_HT40 2G_HT20 */ - {0x0000a2dc, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xfffd5aaa, 0xfffd5aaa}, - {0x0000a2e0, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xfffe9ccc, 0xfffe9ccc}, - {0x0000a2e4, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xffffe0f0, 0xffffe0f0}, + {0x0000a2dc, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xfffd5aaa, 0xfffd5aaa}, + {0x0000a2e0, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffe9ccc, 0xfffe9ccc}, + {0x0000a2e4, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffffe0f0, 0xffffe0f0}, {0x0000a2e8, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xfffcff00, 0xfffcff00}, {0x0000a410, 0x000050de, 0x000050de, 0x000050de, 0x000050de, 0x000050de, 0x000050de, 0x000050da, 0x000050da}, {0x0000a500, 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000003, 0x00000000, 0x00000000}, @@ -256,63 +256,63 @@ static const u32 ar955x_1p0_modes_xpa_tx_gain_table[][9] = { {0x0000a50c, 0x0c00000b, 0x0c00000b, 0x0c00000b, 0x0c00000b, 0x0c00000b, 0x0c00000b, 0x0c000006, 0x0c000006}, {0x0000a510, 0x1000000d, 0x1000000d, 0x1000000d, 0x1000000d, 0x1000000d, 0x1000000d, 0x0f00000a, 0x0f00000a}, {0x0000a514, 0x14000011, 0x14000011, 0x14000011, 0x14000011, 0x14000011, 0x14000011, 0x1300000c, 0x1300000c}, - {0x0000a518, 0x19004008, 0x19004008, 0x19004008, 0x19004008, 0x18004008, 0x18004008, 0x1700000e, 0x1700000e}, - {0x0000a51c, 0x1d00400a, 0x1d00400a, 0x1d00400a, 0x1d00400a, 0x1c00400a, 0x1c00400a, 0x1b000064, 0x1b000064}, - {0x0000a520, 0x230020a2, 0x230020a2, 0x210020a2, 0x210020a2, 0x200020a2, 0x200020a2, 0x1f000242, 0x1f000242}, - {0x0000a524, 0x2500006e, 0x2500006e, 0x2500006e, 0x2500006e, 0x2400006e, 0x2400006e, 0x23000229, 0x23000229}, - {0x0000a528, 0x29022221, 0x29022221, 0x28022221, 0x28022221, 0x27022221, 0x27022221, 0x270002a2, 0x270002a2}, - {0x0000a52c, 0x2d00062a, 0x2d00062a, 0x2c00062a, 0x2c00062a, 0x2a00062a, 0x2a00062a, 0x2c001203, 0x2c001203}, - {0x0000a530, 0x340220a5, 0x340220a5, 0x320220a5, 0x320220a5, 0x2f0220a5, 0x2f0220a5, 0x30001803, 0x30001803}, - {0x0000a534, 0x380022c5, 0x380022c5, 0x350022c5, 0x350022c5, 0x320022c5, 0x320022c5, 0x33000881, 0x33000881}, - {0x0000a538, 0x3b002486, 0x3b002486, 0x39002486, 0x39002486, 0x36002486, 0x36002486, 0x38001809, 0x38001809}, - {0x0000a53c, 0x3f00248a, 0x3f00248a, 0x3d00248a, 0x3d00248a, 0x3a00248a, 0x3a00248a, 0x3a000814, 0x3a000814}, - {0x0000a540, 0x4202242c, 0x4202242c, 0x4102242c, 0x4102242c, 0x3f02242c, 0x3f02242c, 0x3f001a0c, 0x3f001a0c}, - {0x0000a544, 0x490044c6, 0x490044c6, 0x460044c6, 0x460044c6, 0x420044c6, 0x420044c6, 0x43001a0e, 0x43001a0e}, - {0x0000a548, 0x4d024485, 0x4d024485, 0x4a024485, 0x4a024485, 0x46024485, 0x46024485, 0x46001812, 0x46001812}, - {0x0000a54c, 0x51044483, 0x51044483, 0x4e044483, 0x4e044483, 0x4a044483, 0x4a044483, 0x49001884, 0x49001884}, - {0x0000a550, 0x5404a40c, 0x5404a40c, 0x5204a40c, 0x5204a40c, 0x4d04a40c, 0x4d04a40c, 0x4d001e84, 0x4d001e84}, - {0x0000a554, 0x57024632, 0x57024632, 0x55024632, 0x55024632, 0x52024632, 0x52024632, 0x50001e69, 0x50001e69}, - {0x0000a558, 0x5c00a634, 0x5c00a634, 0x5900a634, 0x5900a634, 0x5600a634, 0x5600a634, 0x550006f4, 0x550006f4}, - {0x0000a55c, 0x5f026832, 0x5f026832, 0x5d026832, 0x5d026832, 0x5a026832, 0x5a026832, 0x59000ad3, 0x59000ad3}, - {0x0000a560, 0x6602b012, 0x6602b012, 0x6202b012, 0x6202b012, 0x5d02b012, 0x5d02b012, 0x5e000ad5, 0x5e000ad5}, - {0x0000a564, 0x6e02d0e1, 0x6e02d0e1, 0x6802d0e1, 0x6802d0e1, 0x6002d0e1, 0x6002d0e1, 0x61001ced, 0x61001ced}, - {0x0000a568, 0x7202b4c4, 0x7202b4c4, 0x6c02b4c4, 0x6c02b4c4, 0x6502b4c4, 0x6502b4c4, 0x660018d4, 0x660018d4}, - {0x0000a56c, 0x75007894, 0x75007894, 0x70007894, 0x70007894, 0x6b007894, 0x6b007894, 0x660018d4, 0x660018d4}, - {0x0000a570, 0x7b025c74, 0x7b025c74, 0x75025c74, 0x75025c74, 0x70025c74, 0x70025c74, 0x660018d4, 0x660018d4}, - {0x0000a574, 0x8300bcb5, 0x8300bcb5, 0x7a00bcb5, 0x7a00bcb5, 0x7600bcb5, 0x7600bcb5, 0x660018d4, 0x660018d4}, - {0x0000a578, 0x8a04dc74, 0x8a04dc74, 0x7f04dc74, 0x7f04dc74, 0x7c04dc74, 0x7c04dc74, 0x660018d4, 0x660018d4}, - {0x0000a57c, 0x8a04dc74, 0x8a04dc74, 0x7f04dc74, 0x7f04dc74, 0x7c04dc74, 0x7c04dc74, 0x660018d4, 0x660018d4}, + {0x0000a518, 0x1700002b, 0x1700002b, 0x1700002b, 0x1700002b, 0x1600002b, 0x1600002b, 0x1700000e, 0x1700000e}, + {0x0000a51c, 0x1b00002d, 0x1b00002d, 0x1b00002d, 0x1b00002d, 0x1a00002d, 0x1a00002d, 0x1b000064, 0x1b000064}, + {0x0000a520, 0x20000031, 0x20000031, 0x1f000031, 0x1f000031, 0x1e000031, 0x1e000031, 0x1f000242, 0x1f000242}, + {0x0000a524, 0x24000051, 0x24000051, 0x23000051, 0x23000051, 0x23000051, 0x23000051, 0x23000229, 0x23000229}, + {0x0000a528, 0x27000071, 0x27000071, 0x27000071, 0x27000071, 0x26000071, 0x26000071, 0x270002a2, 0x270002a2}, + {0x0000a52c, 0x2b000092, 0x2b000092, 0x2b000092, 0x2b000092, 0x2b000092, 0x2b000092, 0x2c001203, 0x2c001203}, + {0x0000a530, 0x3000028c, 0x3000028c, 0x2f00028c, 0x2f00028c, 0x2e00028c, 0x2e00028c, 0x30001803, 0x30001803}, + {0x0000a534, 0x34000290, 0x34000290, 0x33000290, 0x33000290, 0x32000290, 0x32000290, 0x33000881, 0x33000881}, + {0x0000a538, 0x37000292, 0x37000292, 0x36000292, 0x36000292, 0x35000292, 0x35000292, 0x38001809, 0x38001809}, + {0x0000a53c, 0x3b02028d, 0x3b02028d, 0x3a02028d, 0x3a02028d, 0x3902028d, 0x3902028d, 0x3a000814, 0x3a000814}, + {0x0000a540, 0x3f020291, 0x3f020291, 0x3e020291, 0x3e020291, 0x3d020291, 0x3d020291, 0x3f001a0c, 0x3f001a0c}, + {0x0000a544, 0x44020490, 0x44020490, 0x43020490, 0x43020490, 0x42020490, 0x42020490, 0x43001a0e, 0x43001a0e}, + {0x0000a548, 0x48020492, 0x48020492, 0x47020492, 0x47020492, 0x46020492, 0x46020492, 0x46001812, 0x46001812}, + {0x0000a54c, 0x4c020692, 0x4c020692, 0x4b020692, 0x4b020692, 0x4a020692, 0x4a020692, 0x49001884, 0x49001884}, + {0x0000a550, 0x50020892, 0x50020892, 0x4f020892, 0x4f020892, 0x4e020892, 0x4e020892, 0x4d001e84, 0x4d001e84}, + {0x0000a554, 0x53040891, 0x53040891, 0x53040891, 0x53040891, 0x52040891, 0x52040891, 0x50001e69, 0x50001e69}, + {0x0000a558, 0x58040893, 0x58040893, 0x57040893, 0x57040893, 0x56040893, 0x56040893, 0x550006f4, 0x550006f4}, + {0x0000a55c, 0x5c0408b4, 0x5c0408b4, 0x5a0408b4, 0x5a0408b4, 0x5a0408b4, 0x5a0408b4, 0x59000ad3, 0x59000ad3}, + {0x0000a560, 0x610408b6, 0x610408b6, 0x5e0408b6, 0x5e0408b6, 0x5e0408b6, 0x5e0408b6, 0x5e000ad5, 0x5e000ad5}, + {0x0000a564, 0x670408f6, 0x670408f6, 0x620408f6, 0x620408f6, 0x620408f6, 0x620408f6, 0x61001ced, 0x61001ced}, + {0x0000a568, 0x6a040cf6, 0x6a040cf6, 0x66040cf6, 0x66040cf6, 0x66040cf6, 0x66040cf6, 0x660018d4, 0x660018d4}, + {0x0000a56c, 0x6d040d76, 0x6d040d76, 0x6a040d76, 0x6a040d76, 0x6a040d76, 0x6a040d76, 0x660018d4, 0x660018d4}, + {0x0000a570, 0x70060db6, 0x70060db6, 0x6e060db6, 0x6e060db6, 0x6e060db6, 0x6e060db6, 0x660018d4, 0x660018d4}, + {0x0000a574, 0x730a0df6, 0x730a0df6, 0x720a0df6, 0x720a0df6, 0x720a0df6, 0x720a0df6, 0x660018d4, 0x660018d4}, + {0x0000a578, 0x770a13f6, 0x770a13f6, 0x760a13f6, 0x760a13f6, 0x760a13f6, 0x760a13f6, 0x660018d4, 0x660018d4}, + {0x0000a57c, 0x770a13f6, 0x770a13f6, 0x760a13f6, 0x760a13f6, 0x760a13f6, 0x760a13f6, 0x660018d4, 0x660018d4}, {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, - {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x03804000, 0x03804000}, - {0x0000a610, 0x04c08c01, 0x04c08c01, 0x04808b01, 0x04808b01, 0x04808a01, 0x04808a01, 0x0300ca02, 0x0300ca02}, - {0x0000a614, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00000e04, 0x00000e04}, - {0x0000a618, 0x04010c01, 0x04010c01, 0x03c10b01, 0x03c10b01, 0x03810a01, 0x03810a01, 0x03014000, 0x03014000}, - {0x0000a61c, 0x03814e05, 0x03814e05, 0x03414d05, 0x03414d05, 0x03414d05, 0x03414d05, 0x00000000, 0x00000000}, - {0x0000a620, 0x04010303, 0x04010303, 0x03c10303, 0x03c10303, 0x03810303, 0x03810303, 0x00000000, 0x00000000}, - {0x0000a624, 0x03814e05, 0x03814e05, 0x03414d05, 0x03414d05, 0x03414d05, 0x03414d05, 0x03014000, 0x03014000}, - {0x0000a628, 0x00c0c000, 0x00c0c000, 0x00c0c000, 0x00c0c000, 0x00c0c000, 0x00c0c000, 0x03804c05, 0x03804c05}, - {0x0000a62c, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x00c0c303, 0x0701de06, 0x0701de06}, - {0x0000a630, 0x03418000, 0x03418000, 0x03018000, 0x03018000, 0x02c18000, 0x02c18000, 0x07819c07, 0x07819c07}, - {0x0000a634, 0x03815004, 0x03815004, 0x03414f04, 0x03414f04, 0x03414e04, 0x03414e04, 0x0701dc07, 0x0701dc07}, - {0x0000a638, 0x03005302, 0x03005302, 0x02c05202, 0x02c05202, 0x02805202, 0x02805202, 0x0701dc07, 0x0701dc07}, - {0x0000a63c, 0x04c09302, 0x04c09302, 0x04809202, 0x04809202, 0x04809202, 0x04809202, 0x0701dc07, 0x0701dc07}, - {0x0000b2dc, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xfffd5aaa, 0xfffd5aaa}, - {0x0000b2e0, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xfffe9ccc, 0xfffe9ccc}, - {0x0000b2e4, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xffffe0f0, 0xffffe0f0}, + {0x0000a60c, 0x02c04b01, 0x02c04b01, 0x02c04b01, 0x02c04b01, 0x02c04b01, 0x02c04b01, 0x03804000, 0x03804000}, + {0x0000a610, 0x04008b01, 0x04008b01, 0x04008b01, 0x04008b01, 0x03c08b01, 0x03c08b01, 0x0300ca02, 0x0300ca02}, + {0x0000a614, 0x05811403, 0x05811403, 0x05411303, 0x05411303, 0x05411303, 0x05411303, 0x00000e04, 0x00000e04}, + {0x0000a618, 0x05811604, 0x05811604, 0x05411504, 0x05411504, 0x05411504, 0x05411504, 0x03014000, 0x03014000}, + {0x0000a61c, 0x05811604, 0x05811604, 0x05411504, 0x05411504, 0x05411504, 0x05411504, 0x00000000, 0x00000000}, + {0x0000a620, 0x05811604, 0x05811604, 0x05411504, 0x05411504, 0x05411504, 0x05411504, 0x00000000, 0x00000000}, + {0x0000a624, 0x05811604, 0x05811604, 0x05411504, 0x05411504, 0x05411504, 0x05411504, 0x03014000, 0x03014000}, + {0x0000a628, 0x05811604, 0x05811604, 0x05411504, 0x05411504, 0x05411504, 0x05411504, 0x03804c05, 0x03804c05}, + {0x0000a62c, 0x06815604, 0x06815604, 0x06415504, 0x06415504, 0x06015504, 0x06015504, 0x0701de06, 0x0701de06}, + {0x0000a630, 0x07819a05, 0x07819a05, 0x07419905, 0x07419905, 0x07019805, 0x07019805, 0x07819c07, 0x07819c07}, + {0x0000a634, 0x07819e06, 0x07819e06, 0x07419d06, 0x07419d06, 0x07019c06, 0x07019c06, 0x0701dc07, 0x0701dc07}, + {0x0000a638, 0x07819e06, 0x07819e06, 0x07419d06, 0x07419d06, 0x07019c06, 0x07019c06, 0x0701dc07, 0x0701dc07}, + {0x0000a63c, 0x07819e06, 0x07819e06, 0x07419d06, 0x07419d06, 0x07019c06, 0x07019c06, 0x0701dc07, 0x0701dc07}, + {0x0000b2dc, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xfffd5aaa, 0xfffd5aaa}, + {0x0000b2e0, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffe9ccc, 0xfffe9ccc}, + {0x0000b2e4, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffffe0f0, 0xffffe0f0}, {0x0000b2e8, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xfffcff00, 0xfffcff00}, - {0x0000c2dc, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xffffaaaa, 0xfffd5aaa, 0xfffd5aaa}, - {0x0000c2e0, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xffffcccc, 0xfffe9ccc, 0xfffe9ccc}, - {0x0000c2e4, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xfffff0f0, 0xffffe0f0, 0xffffe0f0}, + {0x0000c2dc, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xffff6aaa, 0xfffd5aaa, 0xfffd5aaa}, + {0x0000c2e0, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffdcccc, 0xfffe9ccc, 0xfffe9ccc}, + {0x0000c2e4, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffe3b0f0, 0xffffe0f0, 0xffffe0f0}, {0x0000c2e8, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xffffff00, 0xfffcff00, 0xfffcff00}, {0x00016044, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x010002d4, 0x010002d4}, - {0x00016048, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x66482401, 0x66482401}, + {0x00016048, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401}, {0x00016280, 0x01801e84, 0x01801e84, 0x01801e84, 0x01801e84, 0x01801e84, 0x01801e84, 0x01808e84, 0x01808e84}, {0x00016444, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x010002d4, 0x010002d4}, - {0x00016448, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x66482401, 0x66482401}, + {0x00016448, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401}, {0x00016844, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x056db2d4, 0x010002d4, 0x010002d4}, - {0x00016848, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x62482401, 0x66482401, 0x66482401}, + {0x00016848, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401, 0x66482401}, }; static const u32 ar955x_1p0_mac_core[][2] = { @@ -846,7 +846,7 @@ static const u32 ar955x_1p0_baseband_core[][2] = { {0x0000a44c, 0x00000001}, {0x0000a450, 0x00010000}, {0x0000a458, 0x00000000}, - {0x0000a644, 0x3fad9d74}, + {0x0000a644, 0xbfad9d74}, {0x0000a648, 0x0048060a}, {0x0000a64c, 0x00003c37}, {0x0000a670, 0x03020100}, @@ -1277,7 +1277,7 @@ static const u32 ar955x_1p0_modes_fast_clock[][3] = { {0x0000801c, 0x148ec02b, 0x148ec057}, {0x00008318, 0x000044c0, 0x00008980}, {0x00009e00, 0x0372131c, 0x0372131c}, - {0x0000a230, 0x0000000b, 0x00000016}, + {0x0000a230, 0x0000400b, 0x00004016}, {0x0000a254, 0x00000898, 0x00001130}, }; -- cgit v1.2.3 From 2d7caefbafc4ca00cc87ec675c7981e07fa7f37b Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 8 Jan 2013 20:57:52 +0530 Subject: ath9k_hw: Add TempCompensation feature for AR9550 Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 128 +++++++++++++++++++------ drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 +- 2 files changed, 100 insertions(+), 30 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 562186ca9b52..881e989ea470 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -4586,14 +4586,14 @@ static int ar9003_hw_cal_pier_get(struct ath_hw *ah, return 0; } -static int ar9003_hw_power_control_override(struct ath_hw *ah, - int frequency, - int *correction, - int *voltage, int *temperature) +static void ar9003_hw_power_control_override(struct ath_hw *ah, + int frequency, + int *correction, + int *voltage, int *temperature) { - int tempSlope = 0; + int temp_slope = 0, temp_slope1 = 0, temp_slope2 = 0; struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; - int f[8], t[8], i; + int f[8], t[8], t1[3], t2[3], i; REG_RMW(ah, AR_PHY_TPC_11_B0, (correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), @@ -4624,38 +4624,108 @@ static int ar9003_hw_power_control_override(struct ath_hw *ah, * enable temperature compensation * Need to use register names */ - if (frequency < 4000) - tempSlope = eep->modalHeader2G.tempSlope; - else if ((eep->baseEepHeader.miscConfiguration & 0x20) != 0) { - for (i = 0; i < 8; i++) { - t[i] = eep->base_ext1.tempslopextension[i]; - f[i] = FBIN2FREQ(eep->calFreqPier5G[i], 0); + if (frequency < 4000) { + temp_slope = eep->modalHeader2G.tempSlope; + } else { + if (AR_SREV_9550(ah)) { + t[0] = eep->base_ext1.tempslopextension[2]; + t1[0] = eep->base_ext1.tempslopextension[3]; + t2[0] = eep->base_ext1.tempslopextension[4]; + f[0] = 5180; + + t[1] = eep->modalHeader5G.tempSlope; + t1[1] = eep->base_ext1.tempslopextension[0]; + t2[1] = eep->base_ext1.tempslopextension[1]; + f[1] = 5500; + + t[2] = eep->base_ext1.tempslopextension[5]; + t1[2] = eep->base_ext1.tempslopextension[6]; + t2[2] = eep->base_ext1.tempslopextension[7]; + f[2] = 5785; + + temp_slope = ar9003_hw_power_interpolate(frequency, + f, t, 3); + temp_slope1 = ar9003_hw_power_interpolate(frequency, + f, t1, 3); + temp_slope2 = ar9003_hw_power_interpolate(frequency, + f, t2, 3); + + goto tempslope; } - tempSlope = ar9003_hw_power_interpolate((s32) frequency, - f, t, 8); - } else if (eep->base_ext2.tempSlopeLow != 0) { - t[0] = eep->base_ext2.tempSlopeLow; - f[0] = 5180; - t[1] = eep->modalHeader5G.tempSlope; - f[1] = 5500; - t[2] = eep->base_ext2.tempSlopeHigh; - f[2] = 5785; - tempSlope = ar9003_hw_power_interpolate((s32) frequency, - f, t, 3); - } else - tempSlope = eep->modalHeader5G.tempSlope; - REG_RMW_FIELD(ah, AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, tempSlope); + if ((eep->baseEepHeader.miscConfiguration & 0x20) != 0) { + for (i = 0; i < 8; i++) { + t[i] = eep->base_ext1.tempslopextension[i]; + f[i] = FBIN2FREQ(eep->calFreqPier5G[i], 0); + } + temp_slope = ar9003_hw_power_interpolate((s32) frequency, + f, t, 8); + } else if (eep->base_ext2.tempSlopeLow != 0) { + t[0] = eep->base_ext2.tempSlopeLow; + f[0] = 5180; + t[1] = eep->modalHeader5G.tempSlope; + f[1] = 5500; + t[2] = eep->base_ext2.tempSlopeHigh; + f[2] = 5785; + temp_slope = ar9003_hw_power_interpolate((s32) frequency, + f, t, 3); + } else { + temp_slope = eep->modalHeader5G.tempSlope; + } + } + +tempslope: + if (AR_SREV_9550(ah)) { + /* + * AR955x has tempSlope register for each chain. + * Check whether temp_compensation feature is enabled or not. + */ + if (eep->baseEepHeader.featureEnable & 0x1) { + if (frequency < 4000) { + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, + eep->base_ext2.tempSlopeLow); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, + AR_PHY_TPC_19_ALPHA_THERM, + eep->base_ext2.tempSlopeHigh); + } else { + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope1); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, + AR_PHY_TPC_19_ALPHA_THERM, + temp_slope2); + } + } else { + /* + * If temp compensation is not enabled, + * set all registers to 0. + */ + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, 0); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, + AR_PHY_TPC_19_ALPHA_THERM, 0); + REG_RMW_FIELD(ah, AR_PHY_TPC_19_B2, + AR_PHY_TPC_19_ALPHA_THERM, 0); + } + } else { + REG_RMW_FIELD(ah, AR_PHY_TPC_19, + AR_PHY_TPC_19_ALPHA_THERM, temp_slope); + } if (AR_SREV_9462_20(ah)) REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, - AR_PHY_TPC_19_B1_ALPHA_THERM, tempSlope); + AR_PHY_TPC_19_B1_ALPHA_THERM, temp_slope); REG_RMW_FIELD(ah, AR_PHY_TPC_18, AR_PHY_TPC_18_THERM_CAL_VALUE, temperature[0]); - - return 0; } /* Apply the recorded correction values. */ diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 107956298488..e71774196c01 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -1028,7 +1028,7 @@ #define AR_PHY_TPC_5_B2 (AR_SM2_BASE + 0x208) #define AR_PHY_TPC_6_B2 (AR_SM2_BASE + 0x20c) #define AR_PHY_TPC_11_B2 (AR_SM2_BASE + 0x220) -#define AR_PHY_PDADC_TAB_2 (AR_SM2_BASE + 0x240) +#define AR_PHY_TPC_19_B2 (AR_SM2_BASE + 0x240) #define AR_PHY_TX_IQCAL_STATUS_B2 (AR_SM2_BASE + 0x48c) #define AR_PHY_TX_IQCAL_CORR_COEFF_B2(_i) (AR_SM2_BASE + 0x450 + ((_i) << 2)) -- cgit v1.2.3 From 1a26cda8e0d954257ef2e4e732350232e1506a65 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 8 Jan 2013 20:57:53 +0530 Subject: ath9k_hw: Fix radio programming for AR9550 For AR9550, program the synth value based on the ref. clock. The logic for AR9550 is similar to AR9330, but keep the code separate since changes for AR9330 are required - which would be done later. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 31 ++++++++++++++++------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index ce19c09fa8e8..0c4c5a6ffa16 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -68,7 +68,7 @@ static const int m2ThreshExt_off = 127; static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) { u16 bMode, fracMode = 0, aModeRefSel = 0; - u32 freq, channelSel = 0, reg32 = 0; + u32 freq, chan_frac, div, channelSel = 0, reg32 = 0; struct chan_centers centers; int loadSynthChannel; @@ -77,9 +77,6 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) if (freq < 4800) { /* 2 GHz, fractional mode */ if (AR_SREV_9330(ah)) { - u32 chan_frac; - u32 div; - if (ah->is_clk_25mhz) div = 75; else @@ -89,34 +86,40 @@ static int ar9003_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan) chan_frac = (((freq * 4) % div) * 0x20000) / div; channelSel = (channelSel << 17) | chan_frac; } else if (AR_SREV_9485(ah) || AR_SREV_9565(ah)) { - u32 chan_frac; - /* - * freq_ref = 40 / (refdiva >> amoderefsel); where refdiva=1 and amoderefsel=0 + * freq_ref = 40 / (refdiva >> amoderefsel); + * where refdiva=1 and amoderefsel=0 * ndiv = ((chan_mhz * 4) / 3) / freq_ref; * chansel = int(ndiv), chanfrac = (ndiv - chansel) * 0x20000 */ channelSel = (freq * 4) / 120; chan_frac = (((freq * 4) % 120) * 0x20000) / 120; channelSel = (channelSel << 17) | chan_frac; - } else if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) { + } else if (AR_SREV_9340(ah)) { if (ah->is_clk_25mhz) { - u32 chan_frac; - channelSel = (freq * 2) / 75; chan_frac = (((freq * 2) % 75) * 0x20000) / 75; channelSel = (channelSel << 17) | chan_frac; - } else + } else { channelSel = CHANSEL_2G(freq) >> 1; - } else + } + } else if (AR_SREV_9550(ah)) { + if (ah->is_clk_25mhz) + div = 75; + else + div = 120; + + channelSel = (freq * 4) / div; + chan_frac = (((freq * 4) % div) * 0x20000) / div; + channelSel = (channelSel << 17) | chan_frac; + } else { channelSel = CHANSEL_2G(freq); + } /* Set to 2G mode */ bMode = 1; } else { if ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) && ah->is_clk_25mhz) { - u32 chan_frac; - channelSel = freq / 75; chan_frac = ((freq % 75) * 0x20000) / 75; channelSel = (channelSel << 17) | chan_frac; -- cgit v1.2.3 From e93d083f42a126b5ad8137b5f0e8d6f900b332b8 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 8 Jan 2013 14:48:58 +0100 Subject: ath9k: add spectral scan feature Adds the spectral scan feature for ath9k. AR92xx and AR93xx chips are supported for now. The spectral scan is triggered by configuring a mode through a debugfs control file. Samples can be gathered via another relay debugfs file. Essentially, to try it out: echo chanscan > /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan_ctl iw dev wlan0 scan cat /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan0 > samples echo disable > /sys/kernel/debug/ieee80211/phy0/ath9k/spectral_scan_ctl This feature is still experimental. The special "chanscan" mode is used to perform spectral scan while mac80211 is scanning for channels. To allow this, sw_scan_start/complete() ops have been added. The patch contains code snippets and information from Zefir Kurtisi and information provided by Adrian Chadd and Felix Fietkau. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 64 ++++++++++++ drivers/net/wireless/ath/ath9k/ar9003_phy.c | 64 ++++++++++++ drivers/net/wireless/ath/ath9k/ath9k.h | 152 ++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath9k/debug.c | 115 +++++++++++++++++++++ drivers/net/wireless/ath/ath9k/debug.h | 5 + drivers/net/wireless/ath/ath9k/hw.h | 39 +++++++ drivers/net/wireless/ath/ath9k/init.c | 6 ++ drivers/net/wireless/ath/ath9k/mac.h | 3 +- drivers/net/wireless/ath/ath9k/main.c | 100 ++++++++++++++++++ drivers/net/wireless/ath/ath9k/recv.c | 106 +++++++++++++++++++ 10 files changed, 653 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 8b119811b2d9..51b7c8130ae4 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -555,6 +555,67 @@ static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah, REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); } +void ar9002_hw_spectral_scan_config(struct ath_hw *ah, + struct ath_spec_scan *param) +{ + u8 count; + + if (!param->enabled) { + REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ENABLE); + return; + } + REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA); + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); + + if (param->short_repeat) + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT); + else + REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT); + + /* on AR92xx, the highest bit of count will make the the chip send + * spectral samples endlessly. Check if this really was intended, + * and fix otherwise. + */ + count = param->count; + if (param->endless) + count = 0; + else if (count & 0x80) + count = 0x7f; + + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_COUNT, count); + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_PERIOD, param->period); + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_FFT_PERIOD, param->fft_period); + + return; +} + +static void ar9002_hw_spectral_scan_trigger(struct ath_hw *ah) +{ + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); + /* Activate spectral scan */ + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ACTIVE); +} + +static void ar9002_hw_spectral_scan_wait(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + + /* Poll for spectral scan complete */ + if (!ath9k_hw_wait(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ACTIVE, + 0, AH_WAIT_TIMEOUT)) { + ath_err(common, "spectral scan wait failed\n"); + return; + } +} + void ar9002_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); @@ -569,6 +630,9 @@ void ar9002_hw_attach_phy_ops(struct ath_hw *ah) ops->antdiv_comb_conf_get = ar9002_hw_antdiv_comb_conf_get; ops->antdiv_comb_conf_set = ar9002_hw_antdiv_comb_conf_set; + ops->spectral_scan_config = ar9002_hw_spectral_scan_config; + ops->spectral_scan_trigger = ar9002_hw_spectral_scan_trigger; + ops->spectral_scan_wait = ar9002_hw_spectral_scan_wait; ar9002_hw_set_nf_limits(ah); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 0c4c5a6ffa16..bf119a5f865a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1453,6 +1453,67 @@ set_rfmode: return 0; } +static void ar9003_hw_spectral_scan_config(struct ath_hw *ah, + struct ath_spec_scan *param) +{ + u8 count; + + if (!param->enabled) { + REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ENABLE); + return; + } + + REG_SET_BIT(ah, AR_PHY_RADAR_0, AR_PHY_RADAR_0_FFT_ENA); + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, AR_PHY_SPECTRAL_SCAN_ENABLE); + + /* on AR93xx and newer, count = 0 will make the the chip send + * spectral samples endlessly. Check if this really was intended, + * and fix otherwise. + */ + count = param->count; + if (param->endless) + count = 0; + else if (param->count == 0) + count = 1; + + if (param->short_repeat) + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT); + else + REG_CLR_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_SHORT_REPEAT); + + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_COUNT, count); + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_PERIOD, param->period); + REG_RMW_FIELD(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_FFT_PERIOD, param->fft_period); + + return; +} + +static void ar9003_hw_spectral_scan_trigger(struct ath_hw *ah) +{ + /* Activate spectral scan */ + REG_SET_BIT(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ACTIVE); +} + +static void ar9003_hw_spectral_scan_wait(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + + /* Poll for spectral scan complete */ + if (!ath9k_hw_wait(ah, AR_PHY_SPECTRAL_SCAN, + AR_PHY_SPECTRAL_SCAN_ACTIVE, + 0, AH_WAIT_TIMEOUT)) { + ath_err(common, "spectral scan wait failed\n"); + return; + } +} + void ar9003_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); @@ -1486,6 +1547,9 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah) ops->antdiv_comb_conf_get = ar9003_hw_antdiv_comb_conf_get; ops->antdiv_comb_conf_set = ar9003_hw_antdiv_comb_conf_set; ops->antctrl_shared_chain_lnadiv = ar9003_hw_antctrl_shared_chain_lnadiv; + ops->spectral_scan_config = ar9003_hw_spectral_scan_config; + ops->spectral_scan_trigger = ar9003_hw_spectral_scan_trigger; + ops->spectral_scan_wait = ar9003_hw_spectral_scan_wait; ar9003_hw_set_nf_limits(ah); ar9003_hw_set_radar_conf(ah); diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 72501073b499..094a9322f092 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -670,6 +670,23 @@ struct ath9k_vif_iter_data { int nadhocs; /* number of adhoc vifs */ }; +/* enum spectral_mode: + * + * @SPECTRAL_DISABLED: spectral mode is disabled + * @SPECTRAL_BACKGROUND: hardware sends samples when it is not busy with + * something else. + * @SPECTRAL_MANUAL: spectral scan is enabled, triggering for samples + * is performed manually. + * @SPECTRAL_CHANSCAN: Like manual, but also triggered when changing channels + * during a channel scan. + */ +enum spectral_mode { + SPECTRAL_DISABLED = 0, + SPECTRAL_BACKGROUND, + SPECTRAL_MANUAL, + SPECTRAL_CHANSCAN, +}; + struct ath_softc { struct ieee80211_hw *hw; struct device *dev; @@ -738,6 +755,10 @@ struct ath_softc { u8 ant_tx, ant_rx; struct dfs_pattern_detector *dfs_detector; u32 wow_enabled; + /* relay(fs) channel for spectral scan */ + struct rchan *rfs_chan_spec_scan; + enum spectral_mode spectral_mode; + int scanning; #ifdef CONFIG_PM_SLEEP atomic_t wow_got_bmiss_intr; @@ -746,6 +767,133 @@ struct ath_softc { #endif }; +#define SPECTRAL_SCAN_BITMASK 0x10 +/* Radar info packet format, used for DFS and spectral formats. */ +struct ath_radar_info { + u8 pulse_length_pri; + u8 pulse_length_ext; + u8 pulse_bw_info; +} __packed; + +/* The HT20 spectral data has 4 bytes of additional information at it's end. + * + * [7:0]: all bins {max_magnitude[1:0], bitmap_weight[5:0]} + * [7:0]: all bins max_magnitude[9:2] + * [7:0]: all bins {max_index[5:0], max_magnitude[11:10]} + * [3:0]: max_exp (shift amount to size max bin to 8-bit unsigned) + */ +struct ath_ht20_mag_info { + u8 all_bins[3]; + u8 max_exp; +} __packed; + +#define SPECTRAL_HT20_NUM_BINS 56 + +/* WARNING: don't actually use this struct! MAC may vary the amount of + * data by -1/+2. This struct is for reference only. + */ +struct ath_ht20_fft_packet { + u8 data[SPECTRAL_HT20_NUM_BINS]; + struct ath_ht20_mag_info mag_info; + struct ath_radar_info radar_info; +} __packed; + +#define SPECTRAL_HT20_TOTAL_DATA_LEN (sizeof(struct ath_ht20_fft_packet)) + +/* Dynamic 20/40 mode: + * + * [7:0]: lower bins {max_magnitude[1:0], bitmap_weight[5:0]} + * [7:0]: lower bins max_magnitude[9:2] + * [7:0]: lower bins {max_index[5:0], max_magnitude[11:10]} + * [7:0]: upper bins {max_magnitude[1:0], bitmap_weight[5:0]} + * [7:0]: upper bins max_magnitude[9:2] + * [7:0]: upper bins {max_index[5:0], max_magnitude[11:10]} + * [3:0]: max_exp (shift amount to size max bin to 8-bit unsigned) + */ +struct ath_ht20_40_mag_info { + u8 lower_bins[3]; + u8 upper_bins[3]; + u8 max_exp; +} __packed; + +#define SPECTRAL_HT20_40_NUM_BINS 128 + +/* WARNING: don't actually use this struct! MAC may vary the amount of + * data. This struct is for reference only. + */ +struct ath_ht20_40_fft_packet { + u8 data[SPECTRAL_HT20_40_NUM_BINS]; + struct ath_ht20_40_mag_info mag_info; + struct ath_radar_info radar_info; +} __packed; + + +#define SPECTRAL_HT20_40_TOTAL_DATA_LEN (sizeof(struct ath_ht20_40_fft_packet)) + +/* grabs the max magnitude from the all/upper/lower bins */ +static inline u16 spectral_max_magnitude(u8 *bins) +{ + return (bins[0] & 0xc0) >> 6 | + (bins[1] & 0xff) << 2 | + (bins[2] & 0x03) << 10; +} + +/* return the max magnitude from the all/upper/lower bins */ +static inline u8 spectral_max_index(u8 *bins) +{ + s8 m = (bins[2] & 0xfc) >> 2; + + /* TODO: this still doesn't always report the right values ... */ + if (m > 32) + m |= 0xe0; + else + m &= ~0xe0; + + return m + 29; +} + +/* return the bitmap weight from the all/upper/lower bins */ +static inline u8 spectral_bitmap_weight(u8 *bins) +{ + return bins[0] & 0x3f; +} + +/* FFT sample format given to userspace via debugfs. + * + * Please keep the type/length at the front position and change + * other fields after adding another sample type + * + * TODO: this might need rework when switching to nl80211-based + * interface. + */ +enum ath_fft_sample_type { + ATH_FFT_SAMPLE_HT20 = 0, +}; + +struct fft_sample_tlv { + u8 type; /* see ath_fft_sample */ + u16 length; + /* type dependent data follows */ +} __packed; + +struct fft_sample_ht20 { + struct fft_sample_tlv tlv; + + u8 __alignment; + + u16 freq; + s8 rssi; + s8 noise; + + u16 max_magnitude; + u8 max_index; + u8 bitmap_weight; + + u64 tsf; + + u16 data[SPECTRAL_HT20_NUM_BINS]; +} __packed; + void ath9k_tasklet(unsigned long data); int ath_cabq_update(struct ath_softc *); @@ -768,6 +916,10 @@ void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw); void ath9k_reload_chainmask_settings(struct ath_softc *sc); bool ath9k_uses_beacons(int type); +void ath9k_spectral_scan_trigger(struct ieee80211_hw *hw); +int ath9k_spectral_scan_config(struct ieee80211_hw *hw, + enum spectral_mode spectral_mode); + #ifdef CONFIG_ATH9K_PCI int ath_pci_init(void); diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 13ff9edc2401..75b504ba3b3f 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include "ath9k.h" @@ -966,6 +967,112 @@ static const struct file_operations fops_recv = { .llseek = default_llseek, }; +static ssize_t read_file_spec_scan_ctl(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + char *mode = ""; + unsigned int len; + + switch (sc->spectral_mode) { + case SPECTRAL_DISABLED: + mode = "disable"; + break; + case SPECTRAL_BACKGROUND: + mode = "background"; + break; + case SPECTRAL_CHANSCAN: + mode = "chanscan"; + break; + case SPECTRAL_MANUAL: + mode = "manual"; + break; + } + len = strlen(mode); + return simple_read_from_buffer(user_buf, count, ppos, mode, len); +} + +static ssize_t write_file_spec_scan_ctl(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath_softc *sc = file->private_data; + struct ath_common *common = ath9k_hw_common(sc->sc_ah); + char buf[32]; + ssize_t len; + + len = min(count, sizeof(buf) - 1); + if (copy_from_user(buf, user_buf, len)) + return -EFAULT; + + buf[len] = '\0'; + + if (strncmp("trigger", buf, 7) == 0) { + ath9k_spectral_scan_trigger(sc->hw); + } else if (strncmp("background", buf, 9) == 0) { + ath9k_spectral_scan_config(sc->hw, SPECTRAL_BACKGROUND); + ath_dbg(common, CONFIG, "spectral scan: background mode enabled\n"); + } else if (strncmp("chanscan", buf, 8) == 0) { + ath9k_spectral_scan_config(sc->hw, SPECTRAL_CHANSCAN); + ath_dbg(common, CONFIG, "spectral scan: channel scan mode enabled\n"); + } else if (strncmp("manual", buf, 6) == 0) { + ath9k_spectral_scan_config(sc->hw, SPECTRAL_MANUAL); + ath_dbg(common, CONFIG, "spectral scan: manual mode enabled\n"); + } else if (strncmp("disable", buf, 7) == 0) { + ath9k_spectral_scan_config(sc->hw, SPECTRAL_DISABLED); + ath_dbg(common, CONFIG, "spectral scan: disabled\n"); + } else { + return -EINVAL; + } + + return count; +} + +static const struct file_operations fops_spec_scan_ctl = { + .read = read_file_spec_scan_ctl, + .write = write_file_spec_scan_ctl, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + +static struct dentry *create_buf_file_handler(const char *filename, + struct dentry *parent, + umode_t mode, + struct rchan_buf *buf, + int *is_global) +{ + struct dentry *buf_file; + + buf_file = debugfs_create_file(filename, mode, parent, buf, + &relay_file_operations); + *is_global = 1; + return buf_file; +} + +static int remove_buf_file_handler(struct dentry *dentry) +{ + debugfs_remove(dentry); + + return 0; +} + +void ath_debug_send_fft_sample(struct ath_softc *sc, + struct fft_sample_tlv *fft_sample_tlv) +{ + if (!sc->rfs_chan_spec_scan) + return; + + relay_write(sc->rfs_chan_spec_scan, fft_sample_tlv, + fft_sample_tlv->length + sizeof(*fft_sample_tlv)); +} + +static struct rchan_callbacks rfs_spec_scan_cb = { + .create_buf_file = create_buf_file_handler, + .remove_buf_file = remove_buf_file_handler, +}; + + static ssize_t read_file_regidx(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { @@ -1780,6 +1887,14 @@ int ath9k_init_debug(struct ath_hw *ah) &fops_base_eeprom); debugfs_create_file("modal_eeprom", S_IRUSR, sc->debug.debugfs_phy, sc, &fops_modal_eeprom); + sc->rfs_chan_spec_scan = relay_open("spectral_scan", + sc->debug.debugfs_phy, + 262144, 4, &rfs_spec_scan_cb, + NULL); + debugfs_create_file("spectral_scan_ctl", S_IRUSR | S_IWUSR, + sc->debug.debugfs_phy, sc, + &fops_spec_scan_ctl); + #ifdef CONFIG_ATH9K_MAC_DEBUG debugfs_create_file("samples", S_IRUSR, sc->debug.debugfs_phy, sc, &fops_samps); diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index 375c3b46411e..b19bed7f74c2 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -23,6 +23,7 @@ struct ath_txq; struct ath_buf; +struct fft_sample_tlv; #ifdef CONFIG_ATH9K_DEBUGFS #define TX_STAT_INC(q, c) sc->debug.stats.txstats[q].c++ @@ -323,6 +324,10 @@ void ath9k_sta_remove_debugfs(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct dentry *dir); + +void ath_debug_send_fft_sample(struct ath_softc *sc, + struct fft_sample_tlv *fft_sample); + #else #define RX_STAT_INC(c) /* NOP */ diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 39a226f5eda4..d32ebf7a2414 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -657,6 +657,37 @@ struct ath_hw_private_ops { void (*ani_cache_ini_regs)(struct ath_hw *ah); }; +/** + * struct ath_spec_scan - parameters for Atheros spectral scan + * + * @enabled: enable/disable spectral scan + * @short_repeat: controls whether the chip is in spectral scan mode + * for 4 usec (enabled) or 204 usec (disabled) + * @count: number of scan results requested. There are special meanings + * in some chip revisions: + * AR92xx: highest bit set (>=128) for endless mode + * (spectral scan won't stopped until explicitly disabled) + * AR9300 and newer: 0 for endless mode + * @endless: true if endless mode is intended. Otherwise, count value is + * corrected to the next possible value. + * @period: time duration between successive spectral scan entry points + * (period*256*Tclk). Tclk = ath_common->clockrate + * @fft_period: PHY passes FFT frames to MAC every (fft_period+1)*4uS + * + * Note: Tclk = 40MHz or 44MHz depending upon operating mode. + * Typically it's 44MHz in 2/5GHz on later chips, but there's + * a "fast clock" check for this in 5GHz. + * + */ +struct ath_spec_scan { + bool enabled; + bool short_repeat; + bool endless; + u8 count; + u8 period; + u8 fft_period; +}; + /** * struct ath_hw_ops - callbacks used by hardware code and driver code * @@ -665,6 +696,10 @@ struct ath_hw_private_ops { * * @config_pci_powersave: * @calibrate: periodic calibration for NF, ANI, IQ, ADC gain, ADC-DC + * + * @spectral_scan_config: set parameters for spectral scan and enable/disable it + * @spectral_scan_trigger: trigger a spectral scan run + * @spectral_scan_wait: wait for a spectral scan run to finish */ struct ath_hw_ops { void (*config_pci_powersave)(struct ath_hw *ah, @@ -685,6 +720,10 @@ struct ath_hw_ops { void (*antdiv_comb_conf_set)(struct ath_hw *ah, struct ath_hw_antcomb_conf *antconf); void (*antctrl_shared_chain_lnadiv)(struct ath_hw *hw, bool enable); + void (*spectral_scan_config)(struct ath_hw *ah, + struct ath_spec_scan *param); + void (*spectral_scan_trigger)(struct ath_hw *ah); + void (*spectral_scan_wait)(struct ath_hw *ah); }; struct ath_nf_limits { diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 5c01f43c32b0..90cfcb3983d1 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "ath9k.h" @@ -916,6 +917,11 @@ static void ath9k_deinit_softc(struct ath_softc *sc) sc->dfs_detector->exit(sc->dfs_detector); ath9k_eeprom_release(sc); + + if (sc->rfs_chan_spec_scan) { + relay_close(sc->rfs_chan_spec_scan); + sc->rfs_chan_spec_scan = NULL; + } } void ath9k_deinit_device(struct ath_softc *sc) diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h index 4a745e68dd94..1ff817061ebc 100644 --- a/drivers/net/wireless/ath/ath9k/mac.h +++ b/drivers/net/wireless/ath/ath9k/mac.h @@ -226,7 +226,8 @@ enum ath9k_phyerr { ATH9K_PHYERR_HT_LENGTH_ILLEGAL = 35, ATH9K_PHYERR_HT_RATE_ILLEGAL = 36, - ATH9K_PHYERR_MAX = 37, + ATH9K_PHYERR_SPECTRAL = 38, + ATH9K_PHYERR_MAX = 39, }; struct ath_desc { diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index e1fa70596e61..32417fd4bf5a 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1075,6 +1075,86 @@ static void ath9k_disable_ps(struct ath_softc *sc) ath_dbg(common, PS, "PowerSave disabled\n"); } +void ath9k_spectral_scan_trigger(struct ieee80211_hw *hw) +{ + struct ath_softc *sc = hw->priv; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + u32 rxfilter; + + if (!ath9k_hw_ops(ah)->spectral_scan_trigger) { + ath_err(common, "spectrum analyzer not implemented on this hardware\n"); + return; + } + + ath9k_ps_wakeup(sc); + rxfilter = ath9k_hw_getrxfilter(ah); + ath9k_hw_setrxfilter(ah, rxfilter | + ATH9K_RX_FILTER_PHYRADAR | + ATH9K_RX_FILTER_PHYERR); + + /* TODO: usually this should not be neccesary, but for some reason + * (or in some mode?) the trigger must be called after the + * configuration, otherwise the register will have its values reset + * (on my ar9220 to value 0x01002310) + */ + ath9k_spectral_scan_config(hw, sc->spectral_mode); + ath9k_hw_ops(ah)->spectral_scan_trigger(ah); + ath9k_ps_restore(sc); +} + +int ath9k_spectral_scan_config(struct ieee80211_hw *hw, + enum spectral_mode spectral_mode) +{ + struct ath_softc *sc = hw->priv; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ath_spec_scan param; + + if (!ath9k_hw_ops(ah)->spectral_scan_trigger) { + ath_err(common, "spectrum analyzer not implemented on this hardware\n"); + return -1; + } + + /* NOTE: this will generate a few samples ... + * + * TODO: review default parameters, and/or define an interface to set + * them. + */ + param.enabled = 1; + param.short_repeat = true; + param.count = 8; + param.endless = false; + param.period = 0xFF; + param.fft_period = 0xF; + + switch (spectral_mode) { + case SPECTRAL_DISABLED: + param.enabled = 0; + break; + case SPECTRAL_BACKGROUND: + /* send endless samples. + * TODO: is this really useful for "background"? + */ + param.endless = 1; + break; + case SPECTRAL_CHANSCAN: + break; + case SPECTRAL_MANUAL: + break; + default: + return -1; + } + + ath9k_ps_wakeup(sc); + ath9k_hw_ops(ah)->spectral_scan_config(ah, ¶m); + ath9k_ps_restore(sc); + + sc->spectral_mode = spectral_mode; + + return 0; +} + static int ath9k_config(struct ieee80211_hw *hw, u32 changed) { struct ath_softc *sc = hw->priv; @@ -1188,6 +1268,11 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) */ if (old_pos >= 0) ath_update_survey_nf(sc, old_pos); + + /* perform spectral scan if requested. */ + if (sc->scanning && sc->spectral_mode == SPECTRAL_CHANSCAN) + ath9k_spectral_scan_trigger(hw); + } if (changed & IEEE80211_CONF_CHANGE_POWER) { @@ -2240,6 +2325,19 @@ static void ath9k_set_wakeup(struct ieee80211_hw *hw, bool enabled) } #endif +static void ath9k_sw_scan_start(struct ieee80211_hw *hw) +{ + struct ath_softc *sc = hw->priv; + + sc->scanning = 1; +} + +static void ath9k_sw_scan_complete(struct ieee80211_hw *hw) +{ + struct ath_softc *sc = hw->priv; + + sc->scanning = 0; +} struct ieee80211_ops ath9k_ops = { .tx = ath9k_tx, @@ -2286,4 +2384,6 @@ struct ieee80211_ops ath9k_ops = { .sta_add_debugfs = ath9k_sta_add_debugfs, .sta_remove_debugfs = ath9k_sta_remove_debugfs, #endif + .sw_scan_start = ath9k_sw_scan_start, + .sw_scan_complete = ath9k_sw_scan_complete, }; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 3d236aebf588..45f2d475ac1a 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -15,6 +15,7 @@ */ #include +#include #include "ath9k.h" #include "ar9003_mac.h" @@ -1025,6 +1026,108 @@ static void ath9k_rx_skb_postprocess(struct ath_common *common, rxs->flag &= ~RX_FLAG_DECRYPTED; } +static s8 fix_rssi_inv_only(u8 rssi_val) +{ + if (rssi_val == 128) + rssi_val = 0; + return (s8) rssi_val; +} + + +static void ath_process_fft(struct ath_softc *sc, struct ieee80211_hdr *hdr, + struct ath_rx_status *rs, u64 tsf) +{ +#ifdef CONFIG_ATH_DEBUG + struct ath_hw *ah = sc->sc_ah; + u8 bins[SPECTRAL_HT20_NUM_BINS]; + u8 *vdata = (u8 *)hdr; + struct fft_sample_ht20 fft_sample; + struct ath_radar_info *radar_info; + struct ath_ht20_mag_info *mag_info; + int len = rs->rs_datalen; + int i, dc_pos; + + /* AR9280 and before report via ATH9K_PHYERR_RADAR, AR93xx and newer + * via ATH9K_PHYERR_SPECTRAL. Haven't seen ATH9K_PHYERR_FALSE_RADAR_EXT + * yet, but this is supposed to be possible as well. + */ + if (rs->rs_phyerr != ATH9K_PHYERR_RADAR && + rs->rs_phyerr != ATH9K_PHYERR_FALSE_RADAR_EXT && + rs->rs_phyerr != ATH9K_PHYERR_SPECTRAL) + return; + + /* Variation in the data length is possible and will be fixed later. + * Note that we only support HT20 for now. + * + * TODO: add HT20_40 support as well. + */ + if ((len > SPECTRAL_HT20_TOTAL_DATA_LEN + 2) || + (len < SPECTRAL_HT20_TOTAL_DATA_LEN - 1)) + return; + + /* check if spectral scan bit is set. This does not have to be checked + * if received through a SPECTRAL phy error, but shouldn't hurt. + */ + radar_info = ((struct ath_radar_info *)&vdata[len]) - 1; + if (!(radar_info->pulse_bw_info & SPECTRAL_SCAN_BITMASK)) + return; + + fft_sample.tlv.type = ATH_FFT_SAMPLE_HT20; + fft_sample.tlv.length = sizeof(fft_sample) - sizeof(fft_sample.tlv); + + fft_sample.freq = ah->curchan->chan->center_freq; + fft_sample.rssi = fix_rssi_inv_only(rs->rs_rssi_ctl0); + fft_sample.noise = ah->noise; + + switch (len - SPECTRAL_HT20_TOTAL_DATA_LEN) { + case 0: + /* length correct, nothing to do. */ + memcpy(bins, vdata, SPECTRAL_HT20_NUM_BINS); + break; + case -1: + /* first byte missing, duplicate it. */ + memcpy(&bins[1], vdata, SPECTRAL_HT20_NUM_BINS - 1); + bins[0] = vdata[0]; + break; + case 2: + /* MAC added 2 extra bytes at bin 30 and 32, remove them. */ + memcpy(bins, vdata, 30); + bins[30] = vdata[31]; + memcpy(&bins[31], &vdata[33], SPECTRAL_HT20_NUM_BINS - 31); + break; + case 1: + /* MAC added 2 extra bytes AND first byte is missing. */ + bins[0] = vdata[0]; + memcpy(&bins[0], vdata, 30); + bins[31] = vdata[31]; + memcpy(&bins[32], &vdata[33], SPECTRAL_HT20_NUM_BINS - 32); + break; + default: + return; + } + + /* DC value (value in the middle) is the blind spot of the spectral + * sample and invalid, interpolate it. + */ + dc_pos = SPECTRAL_HT20_NUM_BINS / 2; + bins[dc_pos] = (bins[dc_pos + 1] + bins[dc_pos - 1]) / 2; + + /* mag data is at the end of the frame, in front of radar_info */ + mag_info = ((struct ath_ht20_mag_info *)radar_info) - 1; + + /* Apply exponent and grab further auxiliary information. */ + for (i = 0; i < SPECTRAL_HT20_NUM_BINS; i++) + fft_sample.data[i] = bins[i] << mag_info->max_exp; + + fft_sample.max_magnitude = spectral_max_magnitude(mag_info->all_bins); + fft_sample.max_index = spectral_max_index(mag_info->all_bins); + fft_sample.bitmap_weight = spectral_bitmap_weight(mag_info->all_bins); + fft_sample.tsf = tsf; + + ath_debug_send_fft_sample(sc, &fft_sample.tlv); +#endif +} + int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) { struct ath_buf *bf; @@ -1122,6 +1225,9 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) unlikely(tsf_lower - rs.rs_tstamp > 0x10000000)) rxs->mactime += 0x100000000ULL; + if ((rs.rs_status & ATH9K_RXERR_PHY)) + ath_process_fft(sc, hdr, &rs, rxs->mactime); + retval = ath9k_rx_skb_preprocess(common, hw, hdr, &rs, rxs, &decrypt_error); if (retval) -- cgit v1.2.3 From 0a9ab9bdb3e891762553f667066190c1d22ad62b Mon Sep 17 00:00:00 2001 From: Anderson Lizardo Date: Sun, 6 Jan 2013 18:28:53 -0400 Subject: Bluetooth: Fix incorrect strncpy() in hidp_setup_hid() The length parameter should be sizeof(req->name) - 1 because there is no guarantee that string provided by userspace will contain the trailing '\0'. Can be easily reproduced by manually setting req->name to 128 non-zero bytes prior to ioctl(HIDPCONNADD) and checking the device name setup on input subsystem: $ cat /sys/devices/pnp0/00\:04/tty/ttyS0/hci0/hci0\:1/input8/name AAAAAA[...]AAAAAAAAf0:af:f0:af:f0:af ("f0:af:f0:af:f0:af" is the device bluetooth address, taken from "phys" field in struct hid_device due to overflow.) Cc: stable@vger.kernel.org Signed-off-by: Anderson Lizardo Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan --- net/bluetooth/hidp/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hidp/core.c b/net/bluetooth/hidp/core.c index b2bcbe2dc328..a7352ff3fd1e 100644 --- a/net/bluetooth/hidp/core.c +++ b/net/bluetooth/hidp/core.c @@ -931,7 +931,7 @@ static int hidp_setup_hid(struct hidp_session *session, hid->version = req->version; hid->country = req->country; - strncpy(hid->name, req->name, 128); + strncpy(hid->name, req->name, sizeof(req->name) - 1); snprintf(hid->phys, sizeof(hid->phys), "%pMR", &bt_sk(session->ctrl_sock->sk)->src); -- cgit v1.2.3 From 2c2d45bdcb7063ef58dc2c27d72026c394a8f584 Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Tue, 27 Nov 2012 15:44:24 +0100 Subject: NFC: Add support for SO_TIMESTAMP LLCP socket option Set timestamp in sent and received sk_buffs. timestamp is then put in msghdr structure in llcp_sock_recvmsg(). Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz --- net/nfc/llcp/commands.c | 2 ++ net/nfc/llcp/llcp.c | 4 ++++ net/nfc/llcp/sock.c | 2 ++ 3 files changed, 8 insertions(+) diff --git a/net/nfc/llcp/commands.c b/net/nfc/llcp/commands.c index df24be48d4da..c6bc3bd95052 100644 --- a/net/nfc/llcp/commands.c +++ b/net/nfc/llcp/commands.c @@ -304,6 +304,8 @@ int nfc_llcp_send_symm(struct nfc_dev *dev) skb = llcp_add_header(skb, 0, 0, LLCP_PDU_SYMM); + __net_timestamp(skb); + nfc_llcp_send_to_raw_sock(local, skb, NFC_LLCP_DIRECTION_TX); return nfc_data_exchange(dev, local->target_idx, skb, diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index ec43914c92a9..6c5971437826 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -668,6 +668,8 @@ static void nfc_llcp_tx_work(struct work_struct *work) if (ptype == LLCP_PDU_I) copy_skb = skb_copy(skb, GFP_ATOMIC); + __net_timestamp(skb); + nfc_llcp_send_to_raw_sock(local, skb, NFC_LLCP_DIRECTION_TX); @@ -1245,6 +1247,8 @@ static void nfc_llcp_rx_work(struct work_struct *work) print_hex_dump(KERN_DEBUG, "LLCP Rx: ", DUMP_PREFIX_OFFSET, 16, 1, skb->data, skb->len, true); + __net_timestamp(skb); + nfc_llcp_send_to_raw_sock(local, skb, NFC_LLCP_DIRECTION_RX); switch (ptype) { diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index fea22eb41b82..ba1900700958 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -678,6 +678,8 @@ static int llcp_sock_recvmsg(struct kiocb *iocb, struct socket *sock, return -EFAULT; } + sock_recv_timestamp(msg, sk, skb); + if (sk->sk_type == SOCK_DGRAM && msg->msg_name) { struct nfc_llcp_ui_cb *ui_cb = nfc_llcp_ui_skb_cb(skb); struct sockaddr_nfc_llcp sockaddr; -- cgit v1.2.3 From 8d25ca799783788742bc7d9647eec44b6754766e Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:30 +0100 Subject: NFC: pn533: Remove in/out_maxlen as it is not used in_maxlen and out_maxlen was replaced with PN533_NORMAL_FRAME_MAX_LEN Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 36 ++++++++++++++++-------------------- 1 file changed, 16 insertions(+), 20 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index ada681b01a17..cf94113b174a 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -349,11 +349,9 @@ struct pn533 { struct nfc_dev *nfc_dev; struct urb *out_urb; - int out_maxlen; struct pn533_frame *out_frame; struct urb *in_urb; - int in_maxlen; struct pn533_frame *in_frame; struct sk_buff_head resp_q; @@ -1454,8 +1452,9 @@ static int pn533_send_poll_frame(struct pn533 *dev) pn533_build_poll_frame(dev, dev->out_frame, cur_mod); rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen, pn533_poll_complete, - NULL, GFP_KERNEL); + PN533_NORMAL_FRAME_MAX_LEN, + pn533_poll_complete, + NULL, GFP_KERNEL); if (rc) nfc_dev_err(&dev->interface->dev, "Polling loop error %d", rc); @@ -1567,7 +1566,7 @@ static int pn533_activate_target_nfcdep(struct pn533 *dev) pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen); + PN533_NORMAL_FRAME_MAX_LEN); if (rc) return rc; @@ -1661,7 +1660,7 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen); + PN533_NORMAL_FRAME_MAX_LEN); if (rc) { nfc_dev_err(&dev->interface->dev, "Error when sending release" " command to the controller"); @@ -1822,8 +1821,9 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen, pn533_in_dep_link_up_complete, - cmd, GFP_KERNEL); + PN533_NORMAL_FRAME_MAX_LEN, + pn533_in_dep_link_up_complete, cmd, + GFP_KERNEL); if (rc < 0) kfree(cmd); @@ -2121,8 +2121,9 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) out_frame = (struct pn533_frame *) skb->data; rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame, - dev->in_maxlen, pn533_tm_send_complete, - skb, GFP_KERNEL); + PN533_NORMAL_FRAME_MAX_LEN, + pn533_tm_send_complete, skb, + GFP_KERNEL); if (rc) { nfc_dev_err(&dev->interface->dev, "Error %d when trying to send data", rc); @@ -2217,7 +2218,7 @@ static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata, pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen); + PN533_NORMAL_FRAME_MAX_LEN); return rc; } @@ -2238,7 +2239,7 @@ static int pn533_fw_reset(struct pn533 *dev) pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen); + PN533_NORMAL_FRAME_MAX_LEN); return rc; } @@ -2359,16 +2360,11 @@ static int pn533_probe(struct usb_interface *interface, for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; - if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint)) { - dev->in_maxlen = le16_to_cpu(endpoint->wMaxPacketSize); + if (!in_endpoint && usb_endpoint_is_bulk_in(endpoint)) in_endpoint = endpoint->bEndpointAddress; - } - if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint)) { - dev->out_maxlen = - le16_to_cpu(endpoint->wMaxPacketSize); + if (!out_endpoint && usb_endpoint_is_bulk_out(endpoint)) out_endpoint = endpoint->bEndpointAddress; - } } if (!in_endpoint || !out_endpoint) { @@ -2418,7 +2414,7 @@ static int pn533_probe(struct usb_interface *interface, pn533_tx_frame_finish(dev->out_frame); rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - dev->in_maxlen); + PN533_NORMAL_FRAME_MAX_LEN); if (rc) goto destroy_wq; -- cgit v1.2.3 From a449ae1cbdcb5ab45c894362602b239e1d8d96c3 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:31 +0100 Subject: NFC: pn533: Remove unused definitions Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index cf94113b174a..ed8ecb3589be 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -41,11 +41,6 @@ #define SONY_VENDOR_ID 0x054c #define PASORI_PRODUCT_ID 0x02e1 -#define PN533_QUIRKS_TYPE_A BIT(0) -#define PN533_QUIRKS_TYPE_F BIT(1) -#define PN533_QUIRKS_DEP BIT(2) -#define PN533_QUIRKS_RAW_EXCHANGE BIT(3) - #define PN533_DEVICE_STD 0x1 #define PN533_DEVICE_PASORI 0x2 @@ -128,9 +123,6 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_CMD_MI_MASK 0x40 #define PN533_CMD_RET_SUCCESS 0x00 -/* PN533 status codes */ -#define PN533_STATUS_TARGET_RELEASED 0x29 - struct pn533; typedef int (*pn533_cmd_complete_t) (struct pn533 *dev, void *arg, -- cgit v1.2.3 From b1bb290ac2308616b24c5986665d7199ff7b9df3 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:32 +0100 Subject: NFC: pn533: Add frame header length define PN533_CMD_DATAEXCH_HEAD_LEN includes a frame header length which is not seen at a glance. It can be missleading, so split it and define the frame header length explicitly. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 53 +++++++++++++++++++++++++++++++++-------------------- 1 file changed, 33 insertions(+), 20 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index ed8ecb3589be..7040106cb7f2 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -82,10 +82,12 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_NORMAL_FRAME_MAX_LEN 262 /* 6 (PREAMBLE, SOF, LEN, LCS, TFI) 254 (DATA) 2 (DCS, postamble) */ +#define PN533_FRAME_HEADER_LEN (sizeof(struct pn533_frame) \ + + 2) /* data[0] TFI, data[1] CC */ +#define PN533_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ -#define PN533_FRAME_TAIL_SIZE 2 #define PN533_FRAME_SIZE(f) (sizeof(struct pn533_frame) + f->datalen + \ - PN533_FRAME_TAIL_SIZE) + PN533_FRAME_TAIL_LEN) #define PN533_FRAME_ACK_SIZE (sizeof(struct pn533_frame) + 1) #define PN533_FRAME_CHECKSUM(f) (f->data[f->datalen]) #define PN533_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1]) @@ -1233,7 +1235,7 @@ static int pn533_init_target_frame(struct pn533_frame *frame, return 0; } -#define PN533_CMD_DATAEXCH_HEAD_LEN (sizeof(struct pn533_frame) + 3) +#define PN533_CMD_DATAEXCH_HEAD_LEN 1 #define PN533_CMD_DATAEXCH_DATA_MAXLEN 262 static int pn533_tm_get_data_complete(struct pn533 *dev, void *arg, u8 *params, int params_len) @@ -1261,8 +1263,9 @@ static int pn533_tm_get_data_complete(struct pn533 *dev, void *arg, } skb_put(skb_resp, PN533_FRAME_SIZE(in_frame)); - skb_pull(skb_resp, PN533_CMD_DATAEXCH_HEAD_LEN); - skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_SIZE); + skb_pull(skb_resp, + PN533_FRAME_HEADER_LEN + PN533_CMD_DATAEXCH_HEAD_LEN); + skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_LEN); return nfc_tm_data_received(dev->nfc_dev, skb_resp); } @@ -1276,9 +1279,10 @@ static void pn533_wq_tg_get_data(struct work_struct *work) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb_resp_len = PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_SIZE; + skb_resp_len = PN533_FRAME_HEADER_LEN + + PN533_CMD_DATAEXCH_HEAD_LEN + + PN533_CMD_DATAEXCH_DATA_MAXLEN + + PN533_FRAME_TAIL_LEN; skb_resp = nfc_alloc_recv_skb(skb_resp_len, GFP_KERNEL); if (!skb_resp) @@ -1859,11 +1863,12 @@ static int pn533_build_tx_frame(struct pn533 *dev, struct sk_buff *skb, return -ENOSYS; } + skb_push(skb, PN533_FRAME_HEADER_LEN); + if (target == true) { switch (dev->device_type) { case PN533_DEVICE_PASORI: if (dev->tgt_active_prot == NFC_PROTO_FELICA) { - skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN - 1); out_frame = (struct pn533_frame *) skb->data; pn533_tx_frame_init(out_frame, PN533_CMD_IN_COMM_THRU); @@ -1895,7 +1900,7 @@ static int pn533_build_tx_frame(struct pn533 *dev, struct sk_buff *skb, out_frame->datalen += payload_len; pn533_tx_frame_finish(out_frame); - skb_put(skb, PN533_FRAME_TAIL_SIZE); + skb_put(skb, PN533_FRAME_TAIL_LEN); return 0; } @@ -1975,8 +1980,9 @@ static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg, } skb_put(skb_resp, PN533_FRAME_SIZE(in_frame)); + skb_pull(skb_resp, PN533_FRAME_HEADER_LEN); skb_pull(skb_resp, PN533_CMD_DATAEXCH_HEAD_LEN); - skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_SIZE); + skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_LEN); skb_queue_tail(&dev->resp_q, skb_resp); if (status & PN533_CMD_MI_MASK) { @@ -2024,9 +2030,10 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, if (rc) goto error; - skb_resp_len = PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_SIZE; + skb_resp_len = PN533_FRAME_HEADER_LEN + + PN533_CMD_DATAEXCH_HEAD_LEN + + PN533_CMD_DATAEXCH_DATA_MAXLEN + + PN533_FRAME_TAIL_LEN; skb_resp = nfc_alloc_recv_skb(skb_resp_len, GFP_KERNEL); if (!skb_resp) { @@ -2143,20 +2150,25 @@ static void pn533_wq_mi_recv(struct work_struct *work) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); /* This is a zero payload size skb */ - skb_cmd = alloc_skb(PN533_CMD_DATAEXCH_HEAD_LEN + PN533_FRAME_TAIL_SIZE, + skb_cmd = alloc_skb(PN533_FRAME_HEADER_LEN + + PN533_CMD_DATAEXCH_HEAD_LEN + + PN533_FRAME_TAIL_LEN, GFP_KERNEL); if (skb_cmd == NULL) goto error_cmd; - skb_reserve(skb_cmd, PN533_CMD_DATAEXCH_HEAD_LEN); + skb_reserve(skb_cmd, + PN533_FRAME_HEADER_LEN + PN533_CMD_DATAEXCH_HEAD_LEN); rc = pn533_build_tx_frame(dev, skb_cmd, true); if (rc) goto error_frame; - skb_resp_len = PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_SIZE; + skb_resp_len = PN533_FRAME_HEADER_LEN + + PN533_CMD_DATAEXCH_HEAD_LEN + + PN533_CMD_DATAEXCH_DATA_MAXLEN + + PN533_FRAME_TAIL_LEN; + skb_resp = alloc_skb(skb_resp_len, GFP_KERNEL); if (!skb_resp) { rc = -ENOMEM; @@ -2433,8 +2445,9 @@ static int pn533_probe(struct usb_interface *interface, } dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols, + PN533_FRAME_HEADER_LEN + PN533_CMD_DATAEXCH_HEAD_LEN, - PN533_FRAME_TAIL_SIZE); + PN533_FRAME_TAIL_LEN); if (!dev->nfc_dev) goto destroy_wq; -- cgit v1.2.3 From d94ea4f54516b32affeda7ef097b93bca6e6fd32 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:33 +0100 Subject: NFC: pn533: Remove pointless flags param __pn533_send_cmd_frame_async() is called when lock is held so GFP_KERNEL flag will be always used. Thus, having extra param does not optimise the code. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 33 ++++++++++++++------------------- 1 file changed, 14 insertions(+), 19 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 7040106cb7f2..5f3459d11e73 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -392,7 +392,6 @@ struct pn533_cmd { int in_frame_len; pn533_cmd_complete_t cmd_complete; void *arg; - gfp_t flags; }; struct pn533_frame { @@ -646,7 +645,7 @@ static int __pn533_send_cmd_frame_async(struct pn533 *dev, struct pn533_frame *in_frame, int in_frame_len, pn533_cmd_complete_t cmd_complete, - void *arg, gfp_t flags) + void *arg) { int rc; @@ -664,11 +663,11 @@ static int __pn533_send_cmd_frame_async(struct pn533 *dev, dev->in_urb->transfer_buffer = in_frame; dev->in_urb->transfer_buffer_length = in_frame_len; - rc = usb_submit_urb(dev->out_urb, flags); + rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); if (rc) return rc; - rc = pn533_submit_urb_for_ack(dev, flags); + rc = pn533_submit_urb_for_ack(dev, GFP_KERNEL); if (rc) goto error; @@ -700,7 +699,7 @@ static void pn533_wq_cmd(struct work_struct *work) __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, cmd->in_frame_len, cmd->cmd_complete, - cmd->arg, cmd->flags); + cmd->arg); kfree(cmd); } @@ -710,7 +709,7 @@ static int pn533_send_cmd_frame_async(struct pn533 *dev, struct pn533_frame *in_frame, int in_frame_len, pn533_cmd_complete_t cmd_complete, - void *arg, gfp_t flags) + void *arg) { struct pn533_cmd *cmd; int rc = 0; @@ -722,7 +721,7 @@ static int pn533_send_cmd_frame_async(struct pn533 *dev, if (!dev->cmd_pending) { rc = __pn533_send_cmd_frame_async(dev, out_frame, in_frame, in_frame_len, cmd_complete, - arg, flags); + arg); if (!rc) dev->cmd_pending = 1; @@ -731,7 +730,7 @@ static int pn533_send_cmd_frame_async(struct pn533 *dev, nfc_dev_dbg(&dev->interface->dev, "%s Queueing command", __func__); - cmd = kzalloc(sizeof(struct pn533_cmd), flags); + cmd = kzalloc(sizeof(struct pn533_cmd), GFP_KERNEL); if (!cmd) { rc = -ENOMEM; goto unlock; @@ -743,7 +742,6 @@ static int pn533_send_cmd_frame_async(struct pn533 *dev, cmd->in_frame_len = in_frame_len; cmd->cmd_complete = cmd_complete; cmd->arg = arg; - cmd->flags = flags; list_add_tail(&cmd->queue, &dev->cmd_queue); @@ -788,7 +786,7 @@ static int pn533_send_cmd_frame_sync(struct pn533 *dev, init_completion(&arg.done); rc = pn533_send_cmd_frame_async(dev, out_frame, in_frame, in_frame_len, - pn533_sync_cmd_complete, &arg, GFP_KERNEL); + pn533_sync_cmd_complete, &arg); if (rc) return rc; @@ -1296,7 +1294,7 @@ static void pn533_wq_tg_get_data(struct work_struct *work) pn533_send_cmd_frame_async(dev, dev->out_frame, in_frame, skb_resp_len, pn533_tm_get_data_complete, - skb_resp, GFP_KERNEL); + skb_resp); return; } @@ -1450,7 +1448,7 @@ static int pn533_send_poll_frame(struct pn533 *dev) rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, PN533_NORMAL_FRAME_MAX_LEN, pn533_poll_complete, - NULL, GFP_KERNEL); + NULL); if (rc) nfc_dev_err(&dev->interface->dev, "Polling loop error %d", rc); @@ -1818,8 +1816,7 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, PN533_NORMAL_FRAME_MAX_LEN, - pn533_in_dep_link_up_complete, cmd, - GFP_KERNEL); + pn533_in_dep_link_up_complete, cmd); if (rc < 0) kfree(cmd); @@ -2056,8 +2053,7 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, arg->cb_context = cb_context; rc = pn533_send_cmd_frame_async(dev, out_frame, in_frame, skb_resp_len, - pn533_data_exchange_complete, arg, - GFP_KERNEL); + pn533_data_exchange_complete, arg); if (rc) { nfc_dev_err(&dev->interface->dev, "Error %d when trying to" " perform data_exchange", rc); @@ -2121,8 +2117,7 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame, PN533_NORMAL_FRAME_MAX_LEN, - pn533_tm_send_complete, skb, - GFP_KERNEL); + pn533_tm_send_complete, skb); if (rc) { nfc_dev_err(&dev->interface->dev, "Error %d when trying to send data", rc); @@ -2184,7 +2179,7 @@ static void pn533_wq_mi_recv(struct work_struct *work) rc = __pn533_send_cmd_frame_async(dev, out_frame, in_frame, skb_resp_len, pn533_data_exchange_complete, - dev->cmd_complete_arg, GFP_KERNEL); + dev->cmd_complete_arg); if (!rc) return; -- cgit v1.2.3 From aada17ac70e33b127c8f8dd425fc735cc0d30e25 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:34 +0100 Subject: NFC: pn533: Add a new pn533_send_cmd_async iface This is intendend to replace pn533_send_cmd_frame_async() which requires from the caller to create a complete frame. The new function constructs a frame and sends it out which hides the frame logic and avoid code duplication. The caller has to allocate skb and put its payload there, and finally provide the skb together with a complete cb to pn533_send_cmd_async(). Response skb is allocated by the core part and pass to the caller cb. Next, the caller has to free it when is not needed anymore or pass it up to the stack. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 167 +++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 164 insertions(+), 3 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 5f3459d11e73..89f747479a4f 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -117,6 +117,7 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_CMD_TG_INIT_AS_TARGET 0x8c #define PN533_CMD_TG_GET_DATA 0x86 #define PN533_CMD_TG_SET_DATA 0x8e +#define PN533_CMD_UNDEF 0xff #define PN533_CMD_RESPONSE(cmd) (cmd + 1) @@ -130,6 +131,9 @@ struct pn533; typedef int (*pn533_cmd_complete_t) (struct pn533 *dev, void *arg, u8 *params, int params_len); +typedef int (*pn533_send_async_complete_t) (struct pn533 *dev, void *arg, + struct sk_buff *resp); + /* structs for pn533 commands */ /* PN533_CMD_GET_FIRMWARE_VERSION */ @@ -390,6 +394,9 @@ struct pn533_cmd { struct pn533_frame *out_frame; struct pn533_frame *in_frame; int in_frame_len; + u8 cmd_code; + struct sk_buff *req; + struct sk_buff *resp; pn533_cmd_complete_t cmd_complete; void *arg; }; @@ -678,6 +685,151 @@ error: return rc; } +static void pn533_build_cmd_frame(u8 cmd_code, struct sk_buff *skb) +{ + struct pn533_frame *frame; + /* payload is already there, just update datalen */ + int payload_len = skb->len; + + skb_push(skb, PN533_FRAME_HEADER_LEN); + skb_put(skb, PN533_FRAME_TAIL_LEN); + + frame = (struct pn533_frame *)skb->data; + + pn533_tx_frame_init(frame, cmd_code); + frame->datalen += payload_len; + pn533_tx_frame_finish(frame); +} + +struct pn533_send_async_complete_arg { + pn533_send_async_complete_t complete_cb; + void *complete_cb_context; + struct sk_buff *resp; + struct sk_buff *req; +}; + +static int pn533_send_async_complete(struct pn533 *dev, void *_arg, u8 *params, + int params_len) +{ + struct pn533_send_async_complete_arg *arg = _arg; + + struct sk_buff *req = arg->req; + struct sk_buff *resp = arg->resp; + + struct pn533_frame *frame = (struct pn533_frame *)resp->data; + int rc; + + dev_kfree_skb(req); + + if (params_len < 0) { + nfc_dev_err(&dev->interface->dev, + "Error %d when starting as a target", + params_len); + + arg->complete_cb(dev, arg->complete_cb_context, + ERR_PTR(params_len)); + rc = params_len; + dev_kfree_skb(resp); + goto out; + } + + skb_put(resp, PN533_FRAME_SIZE(frame)); + skb_pull(resp, PN533_FRAME_HEADER_LEN); + skb_trim(resp, resp->len - PN533_FRAME_TAIL_LEN); + + rc = arg->complete_cb(dev, arg->complete_cb_context, resp); + +out: + kfree(arg); + return rc; +} + +static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, struct sk_buff *resp, + int resp_len, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct pn533_cmd *cmd; + struct pn533_send_async_complete_arg *arg; + int rc = 0; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + arg = kzalloc(sizeof(arg), GFP_KERNEL); + if (!arg) + return -ENOMEM; + + arg->complete_cb = complete_cb; + arg->complete_cb_context = complete_cb_context; + arg->resp = resp; + arg->req = req; + + pn533_build_cmd_frame(cmd_code, req); + + mutex_lock(&dev->cmd_lock); + + if (!dev->cmd_pending) { + rc = __pn533_send_cmd_frame_async(dev, + (struct pn533_frame *)req->data, + (struct pn533_frame *)resp->data, + resp_len, pn533_send_async_complete, + arg); + if (rc) + goto error; + + dev->cmd_pending = 1; + goto unlock; + } + + nfc_dev_dbg(&dev->interface->dev, "%s Queueing command", __func__); + + cmd = kzalloc(sizeof(struct pn533_cmd), GFP_KERNEL); + if (!cmd) { + rc = -ENOMEM; + goto error; + } + + INIT_LIST_HEAD(&cmd->queue); + cmd->cmd_code = cmd_code; + cmd->req = req; + cmd->resp = resp; + cmd->arg = arg; + + list_add_tail(&cmd->queue, &dev->cmd_queue); + + goto unlock; + +error: + kfree(arg); +unlock: + mutex_unlock(&dev->cmd_lock); + return rc; +} + +static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct sk_buff *resp; + int rc; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + resp = alloc_skb(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + rc = __pn533_send_async(dev, cmd_code, req, resp, + PN533_NORMAL_FRAME_MAX_LEN, + complete_cb, complete_cb_context); + if (rc) + dev_kfree_skb(resp); + + return rc; +} + static void pn533_wq_cmd(struct work_struct *work) { struct pn533 *dev = container_of(work, struct pn533, cmd_work); @@ -697,9 +849,17 @@ static void pn533_wq_cmd(struct work_struct *work) mutex_unlock(&dev->cmd_lock); - __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, - cmd->in_frame_len, cmd->cmd_complete, - cmd->arg); + if (cmd->cmd_code != PN533_CMD_UNDEF) + __pn533_send_cmd_frame_async(dev, + (struct pn533_frame *)cmd->req->data, + (struct pn533_frame *)cmd->resp->data, + PN533_NORMAL_FRAME_MAX_LEN, + pn533_send_async_complete, + cmd->arg); + else + __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, + cmd->in_frame_len, + cmd->cmd_complete, cmd->arg); kfree(cmd); } @@ -740,6 +900,7 @@ static int pn533_send_cmd_frame_async(struct pn533 *dev, cmd->out_frame = out_frame; cmd->in_frame = in_frame; cmd->in_frame_len = in_frame_len; + cmd->cmd_code = PN533_CMD_UNDEF; cmd->cmd_complete = cmd_complete; cmd->arg = arg; -- cgit v1.2.3 From 15461aeb53ae2d3bbde6b374de913e3df81d1ad0 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:35 +0100 Subject: NFC: pn533: Add a new pn533_send_data_async iface This iface is intended to be used with DEP transfers. It differs from pn533_send_cmd_async() in the way the response skb is allocated. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 89f747479a4f..0e9bf9dfbbb5 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -86,6 +86,12 @@ MODULE_DEVICE_TABLE(usb, pn533_table); + 2) /* data[0] TFI, data[1] CC */ #define PN533_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ +/* + * Max extended frame payload len, excluding TFI and CC + * which are already in PN533_FRAME_HEADER_LEN. + */ +#define PN533_FRAME_MAX_PAYLOAD_LEN 263 + #define PN533_FRAME_SIZE(f) (sizeof(struct pn533_frame) + f->datalen + \ PN533_FRAME_TAIL_LEN) #define PN533_FRAME_ACK_SIZE (sizeof(struct pn533_frame) + 1) @@ -807,6 +813,31 @@ unlock: return rc; } +static int pn533_send_data_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct sk_buff *resp; + int rc; + int resp_len = PN533_FRAME_HEADER_LEN + + PN533_FRAME_MAX_PAYLOAD_LEN + + PN533_FRAME_TAIL_LEN; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + resp = nfc_alloc_recv_skb(resp_len, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + rc = __pn533_send_async(dev, cmd_code, req, resp, resp_len, complete_cb, + complete_cb_context); + if (rc) + dev_kfree_skb(resp); + + return rc; +} + static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, struct sk_buff *req, pn533_send_async_complete_t complete_cb, -- cgit v1.2.3 From 94c5c1561dde894766b1a9135e47b056fdbe13a4 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:36 +0100 Subject: NFC: pn533: Add a new pn533_send_sync iface It is intended to replace pn533_send_cmd_frame_sync() iface which requires from the caller to create complete frame. The new function constructs a complete frame itself and sends it out in sync manner. This way frame logic is hidden from the caller. pn533_send_cmd_sync() returns ERR_PTR in case of an error or a pointer to valid response sk_buff otherwise. The pointer must be freed by the caller when it's been consumed. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 54 insertions(+), 1 deletion(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 0e9bf9dfbbb5..94c88bb601cd 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -945,6 +945,7 @@ unlock: struct pn533_sync_cmd_response { int rc; + struct sk_buff *resp; struct completion done; }; @@ -965,6 +966,58 @@ static int pn533_sync_cmd_complete(struct pn533 *dev, void *_arg, return 0; } +static int pn533_send_sync_complete(struct pn533 *dev, void *_arg, + struct sk_buff *resp) +{ + struct pn533_sync_cmd_response *arg = _arg; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + arg->resp = resp; + complete(&arg->done); + + return 0; +} + +/* pn533_send_cmd_sync + * + * Please note the req parameter is freed inside the function to + * limit a number of return value interpretations by the caller. + * + * 1. negative in case of error during TX path -> req should be freed + * + * 2. negative in case of error during RX path -> req should not be freed + * as it's been already freed at the begining of RX path by + * async_complete_cb. + * + * 3. valid pointer in case of succesfult RX path + * + * A caller has to check a return value with IS_ERR macro. If the test pass, + * the returned pointer is valid. + * + * */ +static struct sk_buff *pn533_send_cmd_sync(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req) +{ + int rc; + struct pn533_sync_cmd_response arg; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + init_completion(&arg.done); + + rc = pn533_send_cmd_async(dev, cmd_code, req, + pn533_send_sync_complete, &arg); + if (rc) { + dev_kfree_skb(req); + return ERR_PTR(rc); + } + + wait_for_completion(&arg.done); + + return arg.resp; +} + static int pn533_send_cmd_frame_sync(struct pn533 *dev, struct pn533_frame *out_frame, struct pn533_frame *in_frame, @@ -2432,7 +2485,7 @@ static int pn533_fw_reset(struct pn533 *dev) rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, PN533_NORMAL_FRAME_MAX_LEN); - return rc; + return 0; } static struct nfc_ops pn533_nfc_ops = { -- cgit v1.2.3 From d22b2db69035ae3b8f71a58dfe0bd10ae1ee58d5 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:37 +0100 Subject: NFC: pn533: Add pn533_alloc_skb for req allocation Allocate sk_buff for the request. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 94c88bb601cd..c34acd0dc5ff 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1062,6 +1062,20 @@ static void pn533_send_complete(struct urb *urb) } } +static struct sk_buff *pn533_alloc_skb(unsigned int size) +{ + struct sk_buff *skb; + + skb = alloc_skb(PN533_FRAME_HEADER_LEN + + size + + PN533_FRAME_TAIL_LEN, GFP_KERNEL); + + if (skb) + skb_reserve(skb, PN533_FRAME_HEADER_LEN); + + return skb; +} + struct pn533_target_type_a { __be16 sens_res; u8 sel_res; @@ -2390,15 +2404,11 @@ static void pn533_wq_mi_recv(struct work_struct *work) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); /* This is a zero payload size skb */ - skb_cmd = alloc_skb(PN533_FRAME_HEADER_LEN + - PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_FRAME_TAIL_LEN, - GFP_KERNEL); + skb_cmd = pn533_alloc_skb(PN533_CMD_DATAEXCH_HEAD_LEN); if (skb_cmd == NULL) goto error_cmd; - skb_reserve(skb_cmd, - PN533_FRAME_HEADER_LEN + PN533_CMD_DATAEXCH_HEAD_LEN); + skb_reserve(skb_cmd, PN533_CMD_DATAEXCH_HEAD_LEN); rc = pn533_build_tx_frame(dev, skb_cmd, true); if (rc) -- cgit v1.2.3 From cb950d9304b2965bef07e26d6c0eb34a0b1f75fe Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 26 Nov 2012 14:18:38 +0100 Subject: NFC: pn533: Remove pn533_send_cmd_frame_sync Remove obsolate pn533_send_cmd_frame_sync() and use previously added new iface for sync send. The new interface require the use of individual skb for each cmd which removes some memcpy calls and hides frame logic. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 197 +++++++++++++++++++++++----------------------------- 1 file changed, 85 insertions(+), 112 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index c34acd0dc5ff..e5615f538aaa 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -286,11 +286,6 @@ const struct pn533_poll_modulations poll_mod[] = { /* PN533_CMD_IN_ATR */ -struct pn533_cmd_activate_param { - u8 tg; - u8 next; -} __packed; - struct pn533_cmd_activate_response { u8 status; u8 nfcid3t[10]; @@ -944,28 +939,10 @@ unlock: } struct pn533_sync_cmd_response { - int rc; struct sk_buff *resp; struct completion done; }; -static int pn533_sync_cmd_complete(struct pn533 *dev, void *_arg, - u8 *params, int params_len) -{ - struct pn533_sync_cmd_response *arg = _arg; - - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - - arg->rc = 0; - - if (params_len < 0) /* error */ - arg->rc = params_len; - - complete(&arg->done); - - return 0; -} - static int pn533_send_sync_complete(struct pn533 *dev, void *_arg, struct sk_buff *resp) { @@ -1018,28 +995,6 @@ static struct sk_buff *pn533_send_cmd_sync(struct pn533 *dev, u8 cmd_code, return arg.resp; } -static int pn533_send_cmd_frame_sync(struct pn533 *dev, - struct pn533_frame *out_frame, - struct pn533_frame *in_frame, - int in_frame_len) -{ - int rc; - struct pn533_sync_cmd_response arg; - - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - - init_completion(&arg.done); - - rc = pn533_send_cmd_frame_async(dev, out_frame, in_frame, in_frame_len, - pn533_sync_cmd_complete, &arg); - if (rc) - return rc; - - wait_for_completion(&arg.done); - - return arg.rc; -} - static void pn533_send_complete(struct urb *urb) { struct pn533 *dev = urb->context; @@ -1801,38 +1756,37 @@ static void pn533_stop_poll(struct nfc_dev *nfc_dev) static int pn533_activate_target_nfcdep(struct pn533 *dev) { - struct pn533_cmd_activate_param param; - struct pn533_cmd_activate_response *resp; + struct pn533_cmd_activate_response *rsp; u16 gt_len; int rc; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + struct sk_buff *skb; + struct sk_buff *resp; - pn533_tx_frame_init(dev->out_frame, PN533_CMD_IN_ATR); + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - param.tg = 1; - param.next = 0; - memcpy(PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame), ¶m, - sizeof(struct pn533_cmd_activate_param)); - dev->out_frame->datalen += sizeof(struct pn533_cmd_activate_param); + skb = pn533_alloc_skb(sizeof(u8) * 2); /*TG + Next*/ + if (!skb) + return -ENOMEM; - pn533_tx_frame_finish(dev->out_frame); + *skb_put(skb, sizeof(u8)) = 1; /* TG */ + *skb_put(skb, sizeof(u8)) = 0; /* Next */ - rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN); - if (rc) - return rc; + resp = pn533_send_cmd_sync(dev, PN533_CMD_IN_ATR, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); - resp = (struct pn533_cmd_activate_response *) - PN533_FRAME_CMD_PARAMS_PTR(dev->in_frame); - rc = resp->status & PN533_CMD_RET_MASK; + rsp = (struct pn533_cmd_activate_response *) resp->data; + rc = rsp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) + dev_kfree_skb(resp); return -EIO; /* ATR_RES general bytes are located at offset 16 */ - gt_len = PN533_FRAME_CMD_PARAMS_LEN(dev->in_frame) - 16; - rc = nfc_set_remote_general_bytes(dev->nfc_dev, resp->gt, gt_len); + gt_len = resp->len - 16; + rc = nfc_set_remote_general_bytes(dev->nfc_dev, rsp->gt, gt_len); + dev_kfree_skb(resp); return rc; } @@ -1889,8 +1843,10 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, struct nfc_target *target) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); - u8 tg; - u8 status; + + struct sk_buff *skb; + struct sk_buff *resp; + int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); @@ -1901,31 +1857,24 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, } dev->tgt_active_prot = 0; - skb_queue_purge(&dev->resp_q); - pn533_tx_frame_init(dev->out_frame, PN533_CMD_IN_RELEASE); - - tg = 1; - memcpy(PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame), &tg, sizeof(u8)); - dev->out_frame->datalen += sizeof(u8); + skb = pn533_alloc_skb(sizeof(u8)); + if (!skb) + return; - pn533_tx_frame_finish(dev->out_frame); + *skb_put(skb, 1) = 1; /* TG*/ - rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN); - if (rc) { - nfc_dev_err(&dev->interface->dev, "Error when sending release" - " command to the controller"); + resp = pn533_send_cmd_sync(dev, PN533_CMD_IN_RELEASE, skb); + if (IS_ERR(resp)) return; - } - status = PN533_FRAME_CMD_PARAMS_PTR(dev->in_frame)[0]; - rc = status & PN533_CMD_RET_MASK; + rc = resp->data[0] & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) nfc_dev_err(&dev->interface->dev, "Error 0x%x when releasing" " the target", rc); + dev_kfree_skb(resp); return; } @@ -2457,43 +2406,71 @@ error_cmd: static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata, u8 cfgdata_len) { - int rc; - u8 *params; + struct sk_buff *skb; + struct sk_buff *resp; + + int skb_len; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - pn533_tx_frame_init(dev->out_frame, PN533_CMD_RF_CONFIGURATION); + skb_len = sizeof(cfgitem) + cfgdata_len; /* cfgitem + cfgdata */ - params = PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame); - params[0] = cfgitem; - memcpy(¶ms[1], cfgdata, cfgdata_len); - dev->out_frame->datalen += (1 + cfgdata_len); + skb = pn533_alloc_skb(skb_len); + if (!skb) + return -ENOMEM; - pn533_tx_frame_finish(dev->out_frame); + *skb_put(skb, sizeof(cfgitem)) = cfgitem; + memcpy(skb_put(skb, cfgdata_len), cfgdata, cfgdata_len); - rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN); + resp = pn533_send_cmd_sync(dev, PN533_CMD_RF_CONFIGURATION, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); - return rc; + dev_kfree_skb(resp); + return 0; +} + +static int pn533_get_firmware_version(struct pn533 *dev, + struct pn533_fw_version *fv) +{ + struct sk_buff *skb; + struct sk_buff *resp; + + skb = pn533_alloc_skb(0); + if (!skb) + return -ENOMEM; + + resp = pn533_send_cmd_sync(dev, PN533_CMD_GET_FIRMWARE_VERSION, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); + + fv->ic = resp->data[0]; + fv->ver = resp->data[1]; + fv->rev = resp->data[2]; + fv->support = resp->data[3]; + + dev_kfree_skb(resp); + return 0; } static int pn533_fw_reset(struct pn533 *dev) { - int rc; - u8 *params; + struct sk_buff *skb; + struct sk_buff *resp; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - pn533_tx_frame_init(dev->out_frame, 0x18); + skb = pn533_alloc_skb(sizeof(u8)); + if (!skb) + return -ENOMEM; - params = PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame); - params[0] = 0x1; - dev->out_frame->datalen += 1; + *skb_put(skb, sizeof(u8)) = 0x1; - pn533_tx_frame_finish(dev->out_frame); + resp = pn533_send_cmd_sync(dev, 0x18, skb); + if (IS_ERR(resp)) + return PTR_ERR(resp); - rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN); + dev_kfree_skb(resp); return 0; } @@ -2592,7 +2569,7 @@ static int pn533_setup(struct pn533 *dev) static int pn533_probe(struct usb_interface *interface, const struct usb_device_id *id) { - struct pn533_fw_version *fw_ver; + struct pn533_fw_version fw_ver; struct pn533 *dev; struct usb_host_interface *iface_desc; struct usb_endpoint_descriptor *endpoint; @@ -2664,18 +2641,14 @@ static int pn533_probe(struct usb_interface *interface, usb_set_intfdata(interface, dev); - pn533_tx_frame_init(dev->out_frame, PN533_CMD_GET_FIRMWARE_VERSION); - pn533_tx_frame_finish(dev->out_frame); - - rc = pn533_send_cmd_frame_sync(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN); - if (rc) + memset(&fw_ver, 0, sizeof(fw_ver)); + rc = pn533_get_firmware_version(dev, &fw_ver); + if (rc < 0) goto destroy_wq; - fw_ver = (struct pn533_fw_version *) - PN533_FRAME_CMD_PARAMS_PTR(dev->in_frame); - nfc_dev_info(&dev->interface->dev, "NXP PN533 firmware ver %d.%d now" - " attached", fw_ver->ver, fw_ver->rev); + nfc_dev_info(&dev->interface->dev, + "NXP PN533 firmware ver %d.%d now attached", + fw_ver.ver, fw_ver.rev); dev->device_type = id->driver_info; switch (dev->device_type) { -- cgit v1.2.3 From 2593c2c6ec236c6aedbb8182d103185ab6580285 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 7 Dec 2012 15:55:19 +0100 Subject: NFC: llcp: Remove the tx backlog queue Not only it was improperly use to queue backlogged RX skbuffs, but it was also not processed at all. If the socket receive queue is full we simply drop the incoming packets. Signed-off-by: Samuel Ortiz --- net/nfc/llcp/llcp.c | 5 ++--- net/nfc/llcp/llcp.h | 1 - net/nfc/llcp/sock.c | 2 -- 3 files changed, 2 insertions(+), 6 deletions(-) diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index 6c5971437826..003c82fe8bd7 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -54,7 +54,6 @@ static void nfc_llcp_socket_purge(struct nfc_llcp_sock *sock) skb_queue_purge(&sock->tx_queue); skb_queue_purge(&sock->tx_pending_queue); - skb_queue_purge(&sock->tx_backlog_queue); if (local == NULL) return; @@ -785,7 +784,7 @@ static void nfc_llcp_recv_ui(struct nfc_llcp_local *local, skb_pull(skb, LLCP_HEADER_SIZE); if (sock_queue_rcv_skb(&llcp_sock->sk, skb)) { pr_err("receive queue is full\n"); - skb_queue_head(&llcp_sock->tx_backlog_queue, skb); + kfree_skb(skb); } nfc_llcp_sock_put(llcp_sock); @@ -980,7 +979,7 @@ static void nfc_llcp_recv_hdlc(struct nfc_llcp_local *local, skb_pull(skb, LLCP_HEADER_SIZE + LLCP_SEQUENCE_SIZE); if (sock_queue_rcv_skb(&llcp_sock->sk, skb)) { pr_err("receive queue is full\n"); - skb_queue_head(&llcp_sock->tx_backlog_queue, skb); + kfree_skb(skb); } } diff --git a/net/nfc/llcp/llcp.h b/net/nfc/llcp/llcp.h index 0d62366f8cc3..0eae5c509504 100644 --- a/net/nfc/llcp/llcp.h +++ b/net/nfc/llcp/llcp.h @@ -121,7 +121,6 @@ struct nfc_llcp_sock { struct sk_buff_head tx_queue; struct sk_buff_head tx_pending_queue; - struct sk_buff_head tx_backlog_queue; struct list_head accept_queue; struct sock *parent; diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index ba1900700958..12ec4879b4ba 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -808,7 +808,6 @@ struct sock *nfc_llcp_sock_alloc(struct socket *sock, int type, gfp_t gfp) llcp_sock->reserved_ssap = LLCP_SAP_MAX; skb_queue_head_init(&llcp_sock->tx_queue); skb_queue_head_init(&llcp_sock->tx_pending_queue); - skb_queue_head_init(&llcp_sock->tx_backlog_queue); INIT_LIST_HEAD(&llcp_sock->accept_queue); if (sock != NULL) @@ -823,7 +822,6 @@ void nfc_llcp_sock_free(struct nfc_llcp_sock *sock) skb_queue_purge(&sock->tx_queue); skb_queue_purge(&sock->tx_pending_queue); - skb_queue_purge(&sock->tx_backlog_queue); list_del_init(&sock->accept_queue); -- cgit v1.2.3 From 1727cf937401945a590ebf25c7fa65a4853fe9bb Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 7 Dec 2012 16:37:30 +0100 Subject: NFC: llcp: Fix Rx memory leak The reference count bump on the llcp Rx path is leading to a memory leak whenever we're not receiving an I frame. We fix that by removing the refcount bump (drivers must not free their received skb) and using it only in the I frame path, when the frame is actually queued. In that case, the skb will only be freed when someone fetches it from userspace. in all other cases, LLCP received frames will be freed when leaving the Rx work queue. Reported-by: Eric Lapuyade Signed-off-by: Samuel Ortiz --- net/nfc/llcp/llcp.c | 35 +++++++++++++++++++++++++---------- 1 file changed, 25 insertions(+), 10 deletions(-) diff --git a/net/nfc/llcp/llcp.c b/net/nfc/llcp/llcp.c index 003c82fe8bd7..85bc75c38dea 100644 --- a/net/nfc/llcp/llcp.c +++ b/net/nfc/llcp/llcp.c @@ -782,8 +782,14 @@ static void nfc_llcp_recv_ui(struct nfc_llcp_local *local, /* There is no sequence with UI frames */ skb_pull(skb, LLCP_HEADER_SIZE); - if (sock_queue_rcv_skb(&llcp_sock->sk, skb)) { - pr_err("receive queue is full\n"); + if (!sock_queue_rcv_skb(&llcp_sock->sk, skb)) { + /* + * UI frames will be freed from the socket layer, so we + * need to keep them alive until someone receives them. + */ + skb_get(skb); + } else { + pr_err("Receive queue is full\n"); kfree_skb(skb); } @@ -977,8 +983,14 @@ static void nfc_llcp_recv_hdlc(struct nfc_llcp_local *local, pr_err("Received out of sequence I PDU\n"); skb_pull(skb, LLCP_HEADER_SIZE + LLCP_SEQUENCE_SIZE); - if (sock_queue_rcv_skb(&llcp_sock->sk, skb)) { - pr_err("receive queue is full\n"); + if (!sock_queue_rcv_skb(&llcp_sock->sk, skb)) { + /* + * I frames will be freed from the socket layer, so we + * need to keep them alive until someone receives them. + */ + skb_get(skb); + } else { + pr_err("Receive queue is full\n"); kfree_skb(skb); } } @@ -1299,6 +1311,13 @@ static void nfc_llcp_rx_work(struct work_struct *work) local->rx_pending = NULL; } +static void __nfc_llcp_recv(struct nfc_llcp_local *local, struct sk_buff *skb) +{ + local->rx_pending = skb; + del_timer(&local->link_timer); + schedule_work(&local->rx_work); +} + void nfc_llcp_recv(void *data, struct sk_buff *skb, int err) { struct nfc_llcp_local *local = (struct nfc_llcp_local *) data; @@ -1309,9 +1328,7 @@ void nfc_llcp_recv(void *data, struct sk_buff *skb, int err) return; } - local->rx_pending = skb_get(skb); - del_timer(&local->link_timer); - schedule_work(&local->rx_work); + __nfc_llcp_recv(local, skb); } int nfc_llcp_data_received(struct nfc_dev *dev, struct sk_buff *skb) @@ -1322,9 +1339,7 @@ int nfc_llcp_data_received(struct nfc_dev *dev, struct sk_buff *skb) if (local == NULL) return -ENODEV; - local->rx_pending = skb_get(skb); - del_timer(&local->link_timer); - schedule_work(&local->rx_work); + __nfc_llcp_recv(local, skb); return 0; } -- cgit v1.2.3 From e487882345a80a17b534182ab1f259f2321e4fed Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:44 +0100 Subject: NFC: pn533: Del frame logic from TgGet/SetData cmd Remove frame logic from TgSetData and TgGetData commands using the new iface for async send. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 97 ++++++++++++++++++----------------------------------- 1 file changed, 33 insertions(+), 64 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index e5615f538aaa..9912824030f6 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1450,65 +1450,46 @@ static int pn533_init_target_frame(struct pn533_frame *frame, #define PN533_CMD_DATAEXCH_HEAD_LEN 1 #define PN533_CMD_DATAEXCH_DATA_MAXLEN 262 static int pn533_tm_get_data_complete(struct pn533 *dev, void *arg, - u8 *params, int params_len) + struct sk_buff *resp) { - struct sk_buff *skb_resp = arg; - struct pn533_frame *in_frame = (struct pn533_frame *) skb_resp->data; + u8 status; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when starting as a target", - params_len); + if (IS_ERR(resp)) + return PTR_ERR(resp); - return params_len; - } + status = resp->data[0]; + skb_pull(resp, sizeof(status)); - if (params_len > 0 && params[0] != 0) { + if (status != 0) { nfc_tm_deactivated(dev->nfc_dev); - dev->tgt_mode = 0; - - kfree_skb(skb_resp); + dev_kfree_skb(resp); return 0; } - skb_put(skb_resp, PN533_FRAME_SIZE(in_frame)); - skb_pull(skb_resp, - PN533_FRAME_HEADER_LEN + PN533_CMD_DATAEXCH_HEAD_LEN); - skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_LEN); - - return nfc_tm_data_received(dev->nfc_dev, skb_resp); + return nfc_tm_data_received(dev->nfc_dev, resp); } static void pn533_wq_tg_get_data(struct work_struct *work) { struct pn533 *dev = container_of(work, struct pn533, tg_work); - struct pn533_frame *in_frame; - struct sk_buff *skb_resp; - size_t skb_resp_len; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + struct sk_buff *skb; + int rc; - skb_resp_len = PN533_FRAME_HEADER_LEN + - PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_LEN; + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb_resp = nfc_alloc_recv_skb(skb_resp_len, GFP_KERNEL); - if (!skb_resp) + skb = pn533_alloc_skb(0); + if (!skb) return; - in_frame = (struct pn533_frame *)skb_resp->data; - - pn533_tx_frame_init(dev->out_frame, PN533_CMD_TG_GET_DATA); - pn533_tx_frame_finish(dev->out_frame); + rc = pn533_send_data_async(dev, PN533_CMD_TG_GET_DATA, skb, + pn533_tm_get_data_complete, NULL); - pn533_send_cmd_frame_async(dev, dev->out_frame, in_frame, - skb_resp_len, - pn533_tm_get_data_complete, - skb_resp); + if (rc < 0) + dev_kfree_skb(skb); return; } @@ -2280,23 +2261,20 @@ error: } static int pn533_tm_send_complete(struct pn533 *dev, void *arg, - u8 *params, int params_len) + struct sk_buff *resp) { - struct sk_buff *skb_out = arg; + u8 status; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - dev_kfree_skb(skb_out); + if (IS_ERR(resp)) + return PTR_ERR(resp); - if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when sending data", - params_len); + status = resp->data[0]; - return params_len; - } + dev_kfree_skb(resp); - if (params_len > 0 && params[0] != 0) { + if (status != 0) { nfc_tm_deactivated(dev->nfc_dev); dev->tgt_mode = 0; @@ -2312,30 +2290,21 @@ static int pn533_tm_send_complete(struct pn533 *dev, void *arg, static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); - struct pn533_frame *out_frame; int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - rc = pn533_build_tx_frame(dev, skb, false); - if (rc) - goto error; - - out_frame = (struct pn533_frame *) skb->data; - - rc = pn533_send_cmd_frame_async(dev, out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_tm_send_complete, skb); - if (rc) { + if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { nfc_dev_err(&dev->interface->dev, - "Error %d when trying to send data", rc); - goto error; + "Data length greater than the max allowed: %d", + PN533_CMD_DATAEXCH_DATA_MAXLEN); + return -ENOSYS; } - return 0; - -error: - kfree_skb(skb); + rc = pn533_send_data_async(dev, PN533_CMD_TG_SET_DATA, skb, + pn533_tm_send_complete, NULL); + if (rc < 0) + dev_kfree_skb(skb); return rc; } -- cgit v1.2.3 From 13003649b1ebb4ea51341a9405a2ec5b10cf4f7e Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:45 +0100 Subject: NFC: pn533: Del frame logic from InJumForDep cmd Remove frame logic from InJmumpForDEP command using the new iface for async send. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 117 ++++++++++++++++++++++++---------------------------- 1 file changed, 55 insertions(+), 62 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 9912824030f6..aa7803f16773 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -298,14 +298,6 @@ struct pn533_cmd_activate_response { u8 gt[]; } __packed; -/* PN533_CMD_IN_JUMP_FOR_DEP */ -struct pn533_cmd_jump_dep { - u8 active; - u8 baud; - u8 next; - u8 data[]; -} __packed; - struct pn533_cmd_jump_dep_response { u8 status; u8 tg; @@ -1861,53 +1853,46 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, - u8 *params, int params_len) + struct sk_buff *resp) { - struct pn533_cmd_jump_dep_response *resp; - struct nfc_target nfc_target; + struct pn533_cmd_jump_dep_response *rsp; u8 target_gt_len; int rc; - struct pn533_cmd_jump_dep *cmd = (struct pn533_cmd_jump_dep *)arg; - u8 active = cmd->active; + u8 active = *(u8 *)arg; kfree(arg); - if (params_len == -ENOENT) { - nfc_dev_dbg(&dev->interface->dev, ""); - return 0; - } - - if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when bringing DEP link up", - params_len); - return 0; - } + if (IS_ERR(resp)) + return PTR_ERR(resp); if (dev->tgt_available_prots && !(dev->tgt_available_prots & (1 << NFC_PROTO_NFC_DEP))) { nfc_dev_err(&dev->interface->dev, "The target does not support DEP"); - return -EINVAL; + rc = -EINVAL; + goto error; } - resp = (struct pn533_cmd_jump_dep_response *) params; - rc = resp->status & PN533_CMD_RET_MASK; + rsp = (struct pn533_cmd_jump_dep_response *)resp->data; + + rc = rsp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) { nfc_dev_err(&dev->interface->dev, "Bringing DEP link up failed %d", rc); - return 0; + goto error; } if (!dev->tgt_available_prots) { + struct nfc_target nfc_target; + nfc_dev_dbg(&dev->interface->dev, "Creating new target"); nfc_target.supported_protocols = NFC_PROTO_NFC_DEP_MASK; nfc_target.nfcid1_len = 10; - memcpy(nfc_target.nfcid1, resp->nfcid3t, nfc_target.nfcid1_len); + memcpy(nfc_target.nfcid1, rsp->nfcid3t, nfc_target.nfcid1_len); rc = nfc_targets_found(dev->nfc_dev, &nfc_target, 1); if (rc) - return 0; + goto error; dev->tgt_available_prots = 0; } @@ -1915,15 +1900,17 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, dev->tgt_active_prot = NFC_PROTO_NFC_DEP; /* ATR_RES general bytes are located at offset 17 */ - target_gt_len = PN533_FRAME_CMD_PARAMS_LEN(dev->in_frame) - 17; + target_gt_len = resp->len - 17; rc = nfc_set_remote_general_bytes(dev->nfc_dev, - resp->gt, target_gt_len); + rsp->gt, target_gt_len); if (rc == 0) rc = nfc_dep_link_is_up(dev->nfc_dev, - dev->nfc_dev->targets[0].idx, - !active, NFC_RF_INITIATOR); + dev->nfc_dev->targets[0].idx, + !active, NFC_RF_INITIATOR); - return 0; +error: + dev_kfree_skb(resp); + return rc; } static int pn533_mod_to_baud(struct pn533 *dev) @@ -1945,10 +1932,11 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, u8 comm_mode, u8* gb, size_t gb_len) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); - struct pn533_cmd_jump_dep *cmd; - u8 cmd_len, *data_ptr; + struct sk_buff *skb; + int rc, baud, skb_len; + u8 *next, *arg; + u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3}; - int rc, baud; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); @@ -1971,43 +1959,48 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, return baud; } - cmd_len = sizeof(struct pn533_cmd_jump_dep) + gb_len; + skb_len = 3 + gb_len; /* ActPass + BR + Next */ if (comm_mode == NFC_COMM_PASSIVE) - cmd_len += PASSIVE_DATA_LEN; + skb_len += PASSIVE_DATA_LEN; - cmd = kzalloc(cmd_len, GFP_KERNEL); - if (cmd == NULL) + skb = pn533_alloc_skb(skb_len); + if (!skb) return -ENOMEM; - pn533_tx_frame_init(dev->out_frame, PN533_CMD_IN_JUMP_FOR_DEP); + *skb_put(skb, 1) = !comm_mode; /* ActPass */ + *skb_put(skb, 1) = baud; /* Baud rate */ + + next = skb_put(skb, 1); /* Next */ + *next = 0; - cmd->active = !comm_mode; - cmd->next = 0; - cmd->baud = baud; - data_ptr = cmd->data; - if (comm_mode == NFC_COMM_PASSIVE && cmd->baud > 0) { - memcpy(data_ptr, passive_data, PASSIVE_DATA_LEN); - cmd->next |= 1; - data_ptr += PASSIVE_DATA_LEN; + if (comm_mode == NFC_COMM_PASSIVE && baud > 0) { + memcpy(skb_put(skb, PASSIVE_DATA_LEN), passive_data, + PASSIVE_DATA_LEN); + *next |= 1; } if (gb != NULL && gb_len > 0) { - cmd->next |= 4; /* We have some Gi */ - memcpy(data_ptr, gb, gb_len); + memcpy(skb_put(skb, gb_len), gb, gb_len); + *next |= 4; /* We have some Gi */ } else { - cmd->next = 0; + *next = 0; } - memcpy(PN533_FRAME_CMD_PARAMS_PTR(dev->out_frame), cmd, cmd_len); - dev->out_frame->datalen += cmd_len; + arg = kmalloc(sizeof(*arg), GFP_KERNEL); + if (!arg) { + dev_kfree_skb(skb); + return -ENOMEM; + } - pn533_tx_frame_finish(dev->out_frame); + *arg = !comm_mode; - rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_in_dep_link_up_complete, cmd); - if (rc < 0) - kfree(cmd); + rc = pn533_send_cmd_async(dev, PN533_CMD_IN_JUMP_FOR_DEP, skb, + pn533_in_dep_link_up_complete, arg); + + if (rc < 0) { + dev_kfree_skb(skb); + kfree(arg); + } return rc; } -- cgit v1.2.3 From b1e666f503b5479efe9adf79fb46f09fe4f04af5 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:46 +0100 Subject: NFC: pn533: Del frame logic from Data Exchange cmd Remove frame logic from transceive cb using new iface for async send. For pn533_wq_mi_recv() use pn533_send_cmd_direct_async which sends the cmd directly to the hardware, skipping cmd queue. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 309 ++++++++++++++++++++++++---------------------------- 1 file changed, 141 insertions(+), 168 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index aa7803f16773..91e1594dfd13 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -360,6 +360,7 @@ struct pn533 { pn533_cmd_complete_t cmd_complete; void *cmd_complete_arg; + void *cmd_complete_mi_arg; struct mutex cmd_lock; u8 cmd; @@ -848,6 +849,57 @@ static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, return rc; } +/* + * pn533_send_cmd_direct_async + * + * The function sends a piority cmd directly to the chip omiting the cmd + * queue. It's intended to be used by chaining mechanism of received responses + * where the host has to request every single chunk of data before scheduling + * next cmd from the queue. + */ +static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, + struct sk_buff *req, + pn533_send_async_complete_t complete_cb, + void *complete_cb_context) +{ + struct pn533_send_async_complete_arg *arg; + struct sk_buff *resp; + int rc; + int resp_len = PN533_FRAME_HEADER_LEN + + PN533_FRAME_MAX_PAYLOAD_LEN + + PN533_FRAME_TAIL_LEN; + + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + + resp = alloc_skb(resp_len, GFP_KERNEL); + if (!resp) + return -ENOMEM; + + arg = kzalloc(sizeof(arg), GFP_KERNEL); + if (!arg) { + dev_kfree_skb(resp); + return -ENOMEM; + } + + arg->complete_cb = complete_cb; + arg->complete_cb_context = complete_cb_context; + arg->resp = resp; + arg->req = req; + + pn533_build_cmd_frame(cmd_code, req); + + rc = __pn533_send_cmd_frame_async(dev, (struct pn533_frame *)req->data, + (struct pn533_frame *)resp->data, + resp_len, pn533_send_async_complete, + arg); + if (rc < 0) { + dev_kfree_skb(resp); + kfree(arg); + } + + return rc; +} + static void pn533_wq_cmd(struct work_struct *work) { struct pn533 *dev = container_of(work, struct pn533, cmd_work); @@ -2024,69 +2076,7 @@ static int pn533_dep_link_down(struct nfc_dev *nfc_dev) return 0; } -static int pn533_build_tx_frame(struct pn533 *dev, struct sk_buff *skb, - bool target) -{ - int payload_len = skb->len; - struct pn533_frame *out_frame; - u8 tg; - - nfc_dev_dbg(&dev->interface->dev, "%s - Sending %d bytes", __func__, - payload_len); - - if (payload_len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { - /* TODO: Implement support to multi-part data exchange */ - nfc_dev_err(&dev->interface->dev, "Data length greater than the" - " max allowed: %d", - PN533_CMD_DATAEXCH_DATA_MAXLEN); - return -ENOSYS; - } - - skb_push(skb, PN533_FRAME_HEADER_LEN); - - if (target == true) { - switch (dev->device_type) { - case PN533_DEVICE_PASORI: - if (dev->tgt_active_prot == NFC_PROTO_FELICA) { - out_frame = (struct pn533_frame *) skb->data; - pn533_tx_frame_init(out_frame, - PN533_CMD_IN_COMM_THRU); - - break; - } - - default: - skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN); - out_frame = (struct pn533_frame *) skb->data; - pn533_tx_frame_init(out_frame, - PN533_CMD_IN_DATA_EXCHANGE); - tg = 1; - memcpy(PN533_FRAME_CMD_PARAMS_PTR(out_frame), - &tg, sizeof(u8)); - out_frame->datalen += sizeof(u8); - - break; - } - - } else { - skb_push(skb, PN533_CMD_DATAEXCH_HEAD_LEN - 1); - out_frame = (struct pn533_frame *) skb->data; - pn533_tx_frame_init(out_frame, PN533_CMD_TG_SET_DATA); - } - - - /* The data is already in the out_frame, just update the datalen */ - out_frame->datalen += payload_len; - - pn533_tx_frame_finish(out_frame); - skb_put(skb, PN533_FRAME_TAIL_LEN); - - return 0; -} - struct pn533_data_exchange_arg { - struct sk_buff *skb_resp; - struct sk_buff *skb_out; data_exchange_cb_t cb; void *cb_context; }; @@ -2130,47 +2120,44 @@ out: } static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg, - u8 *params, int params_len) + struct sk_buff *resp) { struct pn533_data_exchange_arg *arg = _arg; - struct sk_buff *skb = NULL, *skb_resp = arg->skb_resp; - struct pn533_frame *in_frame = (struct pn533_frame *) skb_resp->data; - int err = 0; - u8 status; - u8 cmd_ret; + struct sk_buff *skb; + int rc = 0; + u8 status, ret, mi; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - dev_kfree_skb(arg->skb_out); - - if (params_len < 0) { /* error */ - err = params_len; - goto error; + if (IS_ERR(resp)) { + rc = PTR_ERR(resp); + goto _error; } - status = params[0]; + status = resp->data[0]; + ret = status & PN533_CMD_RET_MASK; + mi = status & PN533_CMD_MI_MASK; + + skb_pull(resp, sizeof(status)); - cmd_ret = status & PN533_CMD_RET_MASK; - if (cmd_ret != PN533_CMD_RET_SUCCESS) { - nfc_dev_err(&dev->interface->dev, "PN533 reported error %d when" - " exchanging data", cmd_ret); - err = -EIO; + if (ret != PN533_CMD_RET_SUCCESS) { + nfc_dev_err(&dev->interface->dev, + "PN533 reported error %d when exchanging data", + ret); + rc = -EIO; goto error; } - skb_put(skb_resp, PN533_FRAME_SIZE(in_frame)); - skb_pull(skb_resp, PN533_FRAME_HEADER_LEN); - skb_pull(skb_resp, PN533_CMD_DATAEXCH_HEAD_LEN); - skb_trim(skb_resp, skb_resp->len - PN533_FRAME_TAIL_LEN); - skb_queue_tail(&dev->resp_q, skb_resp); + skb_queue_tail(&dev->resp_q, resp); - if (status & PN533_CMD_MI_MASK) { + if (mi) { + dev->cmd_complete_mi_arg = arg; queue_work(dev->wq, &dev->mi_work); return -EINPROGRESS; } skb = pn533_build_response(dev); - if (skb == NULL) + if (!skb) goto error; arg->cb(arg->cb_context, skb, 0); @@ -2178,11 +2165,12 @@ static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg, return 0; error: + dev_kfree_skb(resp); +_error: skb_queue_purge(&dev->resp_q); - dev_kfree_skb(skb_resp); - arg->cb(arg->cb_context, NULL, err); + arg->cb(arg->cb_context, NULL, rc); kfree(arg); - return 0; + return rc; } static int pn533_transceive(struct nfc_dev *nfc_dev, @@ -2190,14 +2178,20 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, data_exchange_cb_t cb, void *cb_context) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); - struct pn533_frame *out_frame, *in_frame; - struct pn533_data_exchange_arg *arg; - struct sk_buff *skb_resp; - int skb_resp_len; + struct pn533_data_exchange_arg *arg = NULL; int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) { + /* TODO: Implement support to multi-part data exchange */ + nfc_dev_err(&dev->interface->dev, + "Data length greater than the max allowed: %d", + PN533_CMD_DATAEXCH_DATA_MAXLEN); + rc = -ENOSYS; + goto error; + } + if (!dev->tgt_active_prot) { nfc_dev_err(&dev->interface->dev, "Cannot exchange data if" " there is no active target"); @@ -2205,51 +2199,43 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, goto error; } - rc = pn533_build_tx_frame(dev, skb, true); - if (rc) - goto error; - - skb_resp_len = PN533_FRAME_HEADER_LEN + - PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_LEN; - - skb_resp = nfc_alloc_recv_skb(skb_resp_len, GFP_KERNEL); - if (!skb_resp) { - rc = -ENOMEM; - goto error; - } - - in_frame = (struct pn533_frame *) skb_resp->data; - out_frame = (struct pn533_frame *) skb->data; - - arg = kmalloc(sizeof(struct pn533_data_exchange_arg), GFP_KERNEL); + arg = kmalloc(sizeof(*arg), GFP_KERNEL); if (!arg) { rc = -ENOMEM; - goto free_skb_resp; + goto error; } - arg->skb_resp = skb_resp; - arg->skb_out = skb; arg->cb = cb; arg->cb_context = cb_context; - rc = pn533_send_cmd_frame_async(dev, out_frame, in_frame, skb_resp_len, - pn533_data_exchange_complete, arg); - if (rc) { - nfc_dev_err(&dev->interface->dev, "Error %d when trying to" - " perform data_exchange", rc); - goto free_arg; + switch (dev->device_type) { + case PN533_DEVICE_PASORI: + if (dev->tgt_active_prot == NFC_PROTO_FELICA) { + rc = pn533_send_data_async(dev, PN533_CMD_IN_COMM_THRU, + skb, + pn533_data_exchange_complete, + arg); + + break; + } + default: + *skb_push(skb, sizeof(u8)) = 1; /*TG*/ + + rc = pn533_send_data_async(dev, PN533_CMD_IN_DATA_EXCHANGE, + skb, pn533_data_exchange_complete, + arg); + + break; } + if (rc < 0) /* rc from send_async */ + goto error; + return 0; -free_arg: - kfree(arg); -free_skb_resp: - kfree_skb(skb_resp); error: - kfree_skb(skb); + kfree(arg); + dev_kfree_skb(skb); return rc; } @@ -2305,63 +2291,50 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) static void pn533_wq_mi_recv(struct work_struct *work) { struct pn533 *dev = container_of(work, struct pn533, mi_work); - struct sk_buff *skb_cmd; - struct pn533_data_exchange_arg *arg = dev->cmd_complete_arg; - struct pn533_frame *out_frame, *in_frame; - struct sk_buff *skb_resp; - int skb_resp_len; + + struct sk_buff *skb; int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - /* This is a zero payload size skb */ - skb_cmd = pn533_alloc_skb(PN533_CMD_DATAEXCH_HEAD_LEN); - if (skb_cmd == NULL) - goto error_cmd; + skb = pn533_alloc_skb(PN533_CMD_DATAEXCH_HEAD_LEN); + if (!skb) + goto error; - skb_reserve(skb_cmd, PN533_CMD_DATAEXCH_HEAD_LEN); + switch (dev->device_type) { + case PN533_DEVICE_PASORI: + if (dev->tgt_active_prot == NFC_PROTO_FELICA) { + rc = pn533_send_cmd_direct_async(dev, + PN533_CMD_IN_COMM_THRU, + skb, + pn533_data_exchange_complete, + dev->cmd_complete_mi_arg); - rc = pn533_build_tx_frame(dev, skb_cmd, true); - if (rc) - goto error_frame; + break; + } + default: + *skb_put(skb, sizeof(u8)) = 1; /*TG*/ - skb_resp_len = PN533_FRAME_HEADER_LEN + - PN533_CMD_DATAEXCH_HEAD_LEN + - PN533_CMD_DATAEXCH_DATA_MAXLEN + - PN533_FRAME_TAIL_LEN; + rc = pn533_send_cmd_direct_async(dev, + PN533_CMD_IN_DATA_EXCHANGE, + skb, + pn533_data_exchange_complete, + dev->cmd_complete_mi_arg); - skb_resp = alloc_skb(skb_resp_len, GFP_KERNEL); - if (!skb_resp) { - rc = -ENOMEM; - goto error_frame; + break; } - in_frame = (struct pn533_frame *) skb_resp->data; - out_frame = (struct pn533_frame *) skb_cmd->data; - - arg->skb_resp = skb_resp; - arg->skb_out = skb_cmd; - - rc = __pn533_send_cmd_frame_async(dev, out_frame, in_frame, - skb_resp_len, - pn533_data_exchange_complete, - dev->cmd_complete_arg); - if (!rc) + if (rc == 0) /* success */ return; - nfc_dev_err(&dev->interface->dev, "Error %d when trying to" - " perform data_exchange", rc); - - kfree_skb(skb_resp); + nfc_dev_err(&dev->interface->dev, + "Error %d when trying to perform data_exchange", rc); -error_frame: - kfree_skb(skb_cmd); + dev_kfree_skb(skb); + kfree(dev->cmd_complete_arg); -error_cmd: +error: pn533_send_ack(dev, GFP_KERNEL); - - kfree(arg); - queue_work(dev->wq, &dev->cmd_work); } -- cgit v1.2.3 From 99e591be3d95e55412585729624b05862bb5463c Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:47 +0100 Subject: NFC: pn533: Dump tx and rx data in debug mode Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 91e1594dfd13..b445f0339e03 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -542,6 +542,9 @@ static void pn533_recv_response(struct urb *urb) in_frame = dev->in_urb->transfer_buffer; + print_hex_dump(KERN_DEBUG, "PN533 RX: ", DUMP_PREFIX_NONE, 16, 1, + in_frame, PN533_FRAME_SIZE(in_frame), false); + if (!pn533_rx_frame_is_valid(in_frame)) { nfc_dev_err(&dev->interface->dev, "Received an invalid frame"); dev->wq_in_error = -EIO; @@ -664,6 +667,9 @@ static int __pn533_send_cmd_frame_async(struct pn533 *dev, dev->in_urb->transfer_buffer = in_frame; dev->in_urb->transfer_buffer_length = in_frame_len; + print_hex_dump(KERN_DEBUG, "PN533 TX: ", DUMP_PREFIX_NONE, 16, 1, + out_frame, PN533_FRAME_SIZE(out_frame), false); + rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); if (rc) return rc; -- cgit v1.2.3 From b5193e5da24fb278c68fc0493c0a1073a1b27ab9 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:48 +0100 Subject: NFC: pn533: Remove frame logic from poll cmds Remove frame logic from start_pool cb using the new iface for async send. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 270 ++++++++++++++++++++++++---------------------------- 1 file changed, 126 insertions(+), 144 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index b445f0339e03..1016e0962068 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -320,20 +320,6 @@ struct pn533_cmd_jump_dep_response { #define PN533_INIT_TARGET_RESP_ACTIVE 0x1 #define PN533_INIT_TARGET_RESP_DEP 0x4 -struct pn533_cmd_init_target { - u8 mode; - u8 mifare[6]; - u8 felica[18]; - u8 nfcid3[10]; - u8 gb_len; - u8 gb[]; -} __packed; - -struct pn533_cmd_init_target_response { - u8 mode; - u8 cmd[]; -} __packed; - struct pn533 { struct usb_device *udev; struct usb_interface *interface; @@ -1315,50 +1301,37 @@ static int pn533_target_found_type_b(struct nfc_target *nfc_tgt, u8 *tgt_data, return 0; } -struct pn533_poll_response { - u8 nbtg; - u8 tg; - u8 target_data[]; -} __packed; - -static int pn533_target_found(struct pn533 *dev, - struct pn533_poll_response *resp, int resp_len) +static int pn533_target_found(struct pn533 *dev, u8 tg, u8 *tgdata, + int tgdata_len) { - int target_data_len; struct nfc_target nfc_tgt; int rc; nfc_dev_dbg(&dev->interface->dev, "%s - modulation=%d", __func__, - dev->poll_mod_curr); + dev->poll_mod_curr); - if (resp->tg != 1) + if (tg != 1) return -EPROTO; memset(&nfc_tgt, 0, sizeof(struct nfc_target)); - target_data_len = resp_len - sizeof(struct pn533_poll_response); - switch (dev->poll_mod_curr) { case PN533_POLL_MOD_106KBPS_A: - rc = pn533_target_found_type_a(&nfc_tgt, resp->target_data, - target_data_len); + rc = pn533_target_found_type_a(&nfc_tgt, tgdata, tgdata_len); break; case PN533_POLL_MOD_212KBPS_FELICA: case PN533_POLL_MOD_424KBPS_FELICA: - rc = pn533_target_found_felica(&nfc_tgt, resp->target_data, - target_data_len); + rc = pn533_target_found_felica(&nfc_tgt, tgdata, tgdata_len); break; case PN533_POLL_MOD_106KBPS_JEWEL: - rc = pn533_target_found_jewel(&nfc_tgt, resp->target_data, - target_data_len); + rc = pn533_target_found_jewel(&nfc_tgt, tgdata, tgdata_len); break; case PN533_POLL_MOD_847KBPS_B: - rc = pn533_target_found_type_b(&nfc_tgt, resp->target_data, - target_data_len); + rc = pn533_target_found_type_b(&nfc_tgt, tgdata, tgdata_len); break; default: - nfc_dev_err(&dev->interface->dev, "Unknown current poll" - " modulation"); + nfc_dev_err(&dev->interface->dev, + "Unknown current poll modulation"); return -EPROTO; } @@ -1366,13 +1339,14 @@ static int pn533_target_found(struct pn533 *dev, return rc; if (!(nfc_tgt.supported_protocols & dev->poll_protocols)) { - nfc_dev_dbg(&dev->interface->dev, "The target found does not" - " have the desired protocol"); + nfc_dev_dbg(&dev->interface->dev, + "The Tg found doesn't have the desired protocol"); return -EAGAIN; } - nfc_dev_dbg(&dev->interface->dev, "Target found - supported protocols: " - "0x%x", nfc_tgt.supported_protocols); + nfc_dev_dbg(&dev->interface->dev, + "Target found - supported protocols: 0x%x", + nfc_tgt.supported_protocols); dev->tgt_available_prots = nfc_tgt.supported_protocols; @@ -1424,16 +1398,20 @@ static void pn533_poll_create_mod_list(struct pn533 *dev, pn533_poll_add_mod(dev, PN533_LISTEN_MOD); } -static int pn533_start_poll_complete(struct pn533 *dev, u8 *params, int params_len) +static int pn533_start_poll_complete(struct pn533 *dev, struct sk_buff *resp) { - struct pn533_poll_response *resp; - int rc; + u8 nbtg, tg, *tgdata; + int rc, tgdata_len; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - resp = (struct pn533_poll_response *) params; - if (resp->nbtg) { - rc = pn533_target_found(dev, resp, params_len); + nbtg = resp->data[0]; + tg = resp->data[1]; + tgdata = &resp->data[2]; + tgdata_len = resp->len - 2; /* nbtg + tg */ + + if (nbtg) { + rc = pn533_target_found(dev, tg, tgdata, tgdata_len); /* We must stop the poll after a valid target found */ if (rc == 0) { @@ -1445,56 +1423,55 @@ static int pn533_start_poll_complete(struct pn533 *dev, u8 *params, int params_l return -EAGAIN; } -static int pn533_init_target_frame(struct pn533_frame *frame, - u8 *gb, size_t gb_len) +static struct sk_buff *pn533_alloc_poll_tg_frame(u8 *gbytes, size_t gbytes_len) { - struct pn533_cmd_init_target *cmd; - size_t cmd_len; + struct sk_buff *skb; + u8 *felica, *nfcid3, *gb; + u8 felica_params[18] = {0x1, 0xfe, /* DEP */ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, /* random */ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xff, 0xff}; /* System code */ + u8 mifare_params[6] = {0x1, 0x1, /* SENS_RES */ 0x0, 0x0, 0x0, 0x40}; /* SEL_RES for DEP */ - cmd_len = sizeof(struct pn533_cmd_init_target) + gb_len + 1; - cmd = kzalloc(cmd_len, GFP_KERNEL); - if (cmd == NULL) - return -ENOMEM; + unsigned int skb_len = 36 + /* mode (1), mifare (6), + felica (18), nfcid3 (10), gb_len (1) */ + gbytes_len + + 1; /* len Tk*/ - pn533_tx_frame_init(frame, PN533_CMD_TG_INIT_AS_TARGET); + skb = pn533_alloc_skb(skb_len); + if (!skb) + return NULL; /* DEP support only */ - cmd->mode |= PN533_INIT_TARGET_DEP; + *skb_put(skb, 1) |= PN533_INIT_TARGET_DEP; + + /* MIFARE params */ + memcpy(skb_put(skb, 6), mifare_params, 6); /* Felica params */ - memcpy(cmd->felica, felica_params, 18); - get_random_bytes(cmd->felica + 2, 6); + felica = skb_put(skb, 18); + memcpy(felica, felica_params, 18); + get_random_bytes(felica + 2, 6); /* NFCID3 */ - memset(cmd->nfcid3, 0, 10); - memcpy(cmd->nfcid3, cmd->felica, 8); - - /* MIFARE params */ - memcpy(cmd->mifare, mifare_params, 6); + nfcid3 = skb_put(skb, 10); + memset(nfcid3, 0, 10); + memcpy(nfcid3, felica, 8); /* General bytes */ - cmd->gb_len = gb_len; - memcpy(cmd->gb, gb, gb_len); - - /* Len Tk */ - cmd->gb[gb_len] = 0; - - memcpy(PN533_FRAME_CMD_PARAMS_PTR(frame), cmd, cmd_len); + *skb_put(skb, 1) = gbytes_len; - frame->datalen += cmd_len; + gb = skb_put(skb, gbytes_len); + memcpy(gb, gbytes, gbytes_len); - pn533_tx_frame_finish(frame); - - kfree(cmd); + /* Len Tk */ + *skb_put(skb, 1) = 0; - return 0; + return skb; } #define PN533_CMD_DATAEXCH_HEAD_LEN 1 @@ -1545,41 +1522,32 @@ static void pn533_wq_tg_get_data(struct work_struct *work) } #define ATR_REQ_GB_OFFSET 17 -static int pn533_init_target_complete(struct pn533 *dev, u8 *params, int params_len) +static int pn533_init_target_complete(struct pn533 *dev, struct sk_buff *resp) { - struct pn533_cmd_init_target_response *resp; - u8 frame, comm_mode = NFC_COMM_PASSIVE, *gb; + u8 mode, *cmd, comm_mode = NFC_COMM_PASSIVE, *gb; size_t gb_len; int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when starting as a target", - params_len); - - return params_len; - } - - if (params_len < ATR_REQ_GB_OFFSET + 1) + if (resp->len < ATR_REQ_GB_OFFSET + 1) return -EINVAL; - resp = (struct pn533_cmd_init_target_response *) params; + mode = resp->data[0]; + cmd = &resp->data[1]; - nfc_dev_dbg(&dev->interface->dev, "Target mode 0x%x param len %d\n", - resp->mode, params_len); + nfc_dev_dbg(&dev->interface->dev, "Target mode 0x%x len %d\n", + mode, resp->len); - frame = resp->mode & PN533_INIT_TARGET_RESP_FRAME_MASK; - if (frame == PN533_INIT_TARGET_RESP_ACTIVE) + if ((mode & PN533_INIT_TARGET_RESP_FRAME_MASK) == + PN533_INIT_TARGET_RESP_ACTIVE) comm_mode = NFC_COMM_ACTIVE; - /* Again, only DEP */ - if ((resp->mode & PN533_INIT_TARGET_RESP_DEP) == 0) + if ((mode & PN533_INIT_TARGET_RESP_DEP) == 0) /* Only DEP supported */ return -EOPNOTSUPP; - gb = resp->cmd + ATR_REQ_GB_OFFSET; - gb_len = params_len - (ATR_REQ_GB_OFFSET + 1); + gb = cmd + ATR_REQ_GB_OFFSET; + gb_len = resp->len - (ATR_REQ_GB_OFFSET + 1); rc = nfc_tm_activated(dev->nfc_dev, NFC_PROTO_NFC_DEP_MASK, comm_mode, gb, gb_len); @@ -1590,7 +1558,6 @@ static int pn533_init_target_complete(struct pn533 *dev, u8 *params, int params_ } dev->tgt_mode = 1; - queue_work(dev->wq, &dev->tg_work); return 0; @@ -1613,89 +1580,104 @@ static void pn533_listen_mode_timer(unsigned long data) } static int pn533_poll_complete(struct pn533 *dev, void *arg, - u8 *params, int params_len) + struct sk_buff *resp) { struct pn533_poll_modulations *cur_mod; int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - if (params_len == -ENOENT) { - if (dev->poll_mod_count != 0) - return 0; - - nfc_dev_err(&dev->interface->dev, - "Polling operation has been stopped"); + if (IS_ERR(resp)) { + rc = PTR_ERR(resp); - goto stop_poll; - } + nfc_dev_err(&dev->interface->dev, "%s Poll complete error %d", + __func__, rc); - if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when running poll", params_len); - - goto stop_poll; + if (rc == -ENOENT) { + if (dev->poll_mod_count != 0) + return rc; + else + goto stop_poll; + } else if (rc < 0) { + nfc_dev_err(&dev->interface->dev, + "Error %d when running poll", rc); + goto stop_poll; + } } cur_mod = dev->poll_mod_active[dev->poll_mod_curr]; - if (cur_mod->len == 0) { + if (cur_mod->len == 0) { /* Target mode */ del_timer(&dev->listen_timer); - - return pn533_init_target_complete(dev, params, params_len); - } else { - rc = pn533_start_poll_complete(dev, params, params_len); - if (!rc) - return rc; + rc = pn533_init_target_complete(dev, resp); + goto done; } - pn533_poll_next_mod(dev); + /* Initiator mode */ + rc = pn533_start_poll_complete(dev, resp); + if (!rc) + goto done; + pn533_poll_next_mod(dev); queue_work(dev->wq, &dev->poll_work); - return 0; +done: + dev_kfree_skb(resp); + return rc; stop_poll: + nfc_dev_err(&dev->interface->dev, "Polling operation has been stopped"); + pn533_poll_reset_mod_list(dev); dev->poll_protocols = 0; - return 0; + return rc; } -static void pn533_build_poll_frame(struct pn533 *dev, - struct pn533_frame *frame, - struct pn533_poll_modulations *mod) +static struct sk_buff *pn533_alloc_poll_in_frame(struct pn533_poll_modulations + *mod) { - nfc_dev_dbg(&dev->interface->dev, "mod len %d\n", mod->len); + struct sk_buff *skb; - if (mod->len == 0) { - /* Listen mode */ - pn533_init_target_frame(frame, dev->gb, dev->gb_len); - } else { - /* Polling mode */ - pn533_tx_frame_init(frame, PN533_CMD_IN_LIST_PASSIVE_TARGET); + skb = pn533_alloc_skb(mod->len); + if (!skb) + return NULL; - memcpy(PN533_FRAME_CMD_PARAMS_PTR(frame), &mod->data, mod->len); - frame->datalen += mod->len; + memcpy(skb_put(skb, mod->len), &mod->data, mod->len); - pn533_tx_frame_finish(frame); - } + return skb; } static int pn533_send_poll_frame(struct pn533 *dev) { - struct pn533_poll_modulations *cur_mod; + struct pn533_poll_modulations *mod; + struct sk_buff *skb; int rc; + u8 cmd_code; - cur_mod = dev->poll_mod_active[dev->poll_mod_curr]; + mod = dev->poll_mod_active[dev->poll_mod_curr]; - pn533_build_poll_frame(dev, dev->out_frame, cur_mod); + nfc_dev_dbg(&dev->interface->dev, "%s mod len %d\n", + __func__, mod->len); - rc = pn533_send_cmd_frame_async(dev, dev->out_frame, dev->in_frame, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_poll_complete, - NULL); - if (rc) + if (mod->len == 0) { /* Listen mode */ + cmd_code = PN533_CMD_TG_INIT_AS_TARGET; + skb = pn533_alloc_poll_tg_frame(dev->gb, dev->gb_len); + } else { /* Polling mode */ + cmd_code = PN533_CMD_IN_LIST_PASSIVE_TARGET; + skb = pn533_alloc_poll_in_frame(mod); + } + + if (!skb) { + nfc_dev_err(&dev->interface->dev, "Failed to allocate skb."); + return -ENOMEM; + } + + rc = pn533_send_cmd_async(dev, cmd_code, skb, pn533_poll_complete, + NULL); + if (rc < 0) { + dev_kfree_skb(skb); nfc_dev_err(&dev->interface->dev, "Polling loop error %d", rc); + } return rc; } -- cgit v1.2.3 From 6ca55372bf55885e02d17c58cd29ceef045ee699 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:49 +0100 Subject: NFC: pn533: Fix quoted strings split across lines Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 70 ++++++++++++++++++++++++++--------------------------- 1 file changed, 35 insertions(+), 35 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 1016e0962068..43970610c710 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -515,13 +515,13 @@ static void pn533_recv_response(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with" - " status: %d", urb->status); + nfc_dev_dbg(&dev->interface->dev, + "Urb shutting down with status: %d", urb->status); dev->wq_in_error = urb->status; goto sched_wq; default: - nfc_dev_err(&dev->interface->dev, "Nonzero urb status received:" - " %d", urb->status); + nfc_dev_err(&dev->interface->dev, + "Nonzero urb status received: %d", urb->status); dev->wq_in_error = urb->status; goto sched_wq; } @@ -538,8 +538,8 @@ static void pn533_recv_response(struct urb *urb) } if (!pn533_rx_frame_is_cmd_response(in_frame, dev->cmd)) { - nfc_dev_err(&dev->interface->dev, "The received frame is not " - "response to the last command"); + nfc_dev_err(&dev->interface->dev, + "It it not the response to the last command"); dev->wq_in_error = -EIO; goto sched_wq; } @@ -572,13 +572,13 @@ static void pn533_recv_ack(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with" - " status: %d", urb->status); + nfc_dev_dbg(&dev->interface->dev, + "Urb shutting down with status: %d", urb->status); dev->wq_in_error = urb->status; goto sched_wq; default: - nfc_dev_err(&dev->interface->dev, "Nonzero urb status received:" - " %d", urb->status); + nfc_dev_err(&dev->interface->dev, + "Nonzero urb status received: %d", urb->status); dev->wq_in_error = urb->status; goto sched_wq; } @@ -595,8 +595,8 @@ static void pn533_recv_ack(struct urb *urb) rc = pn533_submit_urb_for_response(dev, GFP_ATOMIC); if (rc) { - nfc_dev_err(&dev->interface->dev, "usb_submit_urb failed with" - " result %d", rc); + nfc_dev_err(&dev->interface->dev, + "usb_submit_urb failed with result %d", rc); dev->wq_in_error = rc; goto sched_wq; } @@ -1044,12 +1044,12 @@ static void pn533_send_complete(struct urb *urb) case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: - nfc_dev_dbg(&dev->interface->dev, "Urb shutting down with" - " status: %d", urb->status); + nfc_dev_dbg(&dev->interface->dev, + "Urb shutting down with status: %d", urb->status); break; default: - nfc_dev_dbg(&dev->interface->dev, "Nonzero urb status received:" - " %d", urb->status); + nfc_dev_dbg(&dev->interface->dev, + "Nonzero urb status received: %d", urb->status); } } @@ -1753,8 +1753,8 @@ static void pn533_stop_poll(struct nfc_dev *nfc_dev) del_timer(&dev->listen_timer); if (!dev->poll_mod_count) { - nfc_dev_dbg(&dev->interface->dev, "Polling operation was not" - " running"); + nfc_dev_dbg(&dev->interface->dev, + "Polling operation was not running"); return; } @@ -1813,35 +1813,35 @@ static int pn533_activate_target(struct nfc_dev *nfc_dev, protocol); if (dev->poll_mod_count) { - nfc_dev_err(&dev->interface->dev, "Cannot activate while" - " polling"); + nfc_dev_err(&dev->interface->dev, + "Cannot activate while polling"); return -EBUSY; } if (dev->tgt_active_prot) { - nfc_dev_err(&dev->interface->dev, "There is already an active" - " target"); + nfc_dev_err(&dev->interface->dev, + "There is already an active target"); return -EBUSY; } if (!dev->tgt_available_prots) { - nfc_dev_err(&dev->interface->dev, "There is no available target" - " to activate"); + nfc_dev_err(&dev->interface->dev, + "There is no available target to activate"); return -EINVAL; } if (!(dev->tgt_available_prots & (1 << protocol))) { - nfc_dev_err(&dev->interface->dev, "The target does not support" - " the requested protocol %u", protocol); + nfc_dev_err(&dev->interface->dev, + "Target doesn't support requested proto %u", + protocol); return -EINVAL; } if (protocol == NFC_PROTO_NFC_DEP) { rc = pn533_activate_target_nfcdep(dev); if (rc) { - nfc_dev_err(&dev->interface->dev, "Error %d when" - " activating target with" - " NFC_DEP protocol", rc); + nfc_dev_err(&dev->interface->dev, + "Activating target with DEP failed %d", rc); return rc; } } @@ -1884,8 +1884,8 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, rc = resp->data[0] & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) - nfc_dev_err(&dev->interface->dev, "Error 0x%x when releasing" - " the target", rc); + nfc_dev_err(&dev->interface->dev, + "Error 0x%x when releasing the target", rc); dev_kfree_skb(resp); return; @@ -2181,8 +2181,8 @@ static int pn533_transceive(struct nfc_dev *nfc_dev, } if (!dev->tgt_active_prot) { - nfc_dev_err(&dev->interface->dev, "Cannot exchange data if" - " there is no active target"); + nfc_dev_err(&dev->interface->dev, + "Can't exchange data if there is no active target"); rc = -EINVAL; goto error; } @@ -2522,8 +2522,8 @@ static int pn533_probe(struct usb_interface *interface, } if (!in_endpoint || !out_endpoint) { - nfc_dev_err(&interface->dev, "Could not find bulk-in or" - " bulk-out endpoint"); + nfc_dev_err(&interface->dev, + "Could not find bulk-in or bulk-out endpoint"); rc = -ENODEV; goto error; } -- cgit v1.2.3 From 37cf4fc6c98f230ca026763ae03cb88ff786eeb9 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:50 +0100 Subject: NFC: pn533: Fix spacing issues Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 43970610c710..19fecdba611b 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1124,7 +1124,7 @@ static int pn533_target_found_type_a(struct nfc_target *nfc_tgt, u8 *tgt_data, { struct pn533_target_type_a *tgt_type_a; - tgt_type_a = (struct pn533_target_type_a *) tgt_data; + tgt_type_a = (struct pn533_target_type_a *)tgt_data; if (!pn533_target_type_a_is_valid(tgt_type_a, tgt_data_len)) return -EPROTO; @@ -1182,7 +1182,7 @@ static int pn533_target_found_felica(struct nfc_target *nfc_tgt, u8 *tgt_data, { struct pn533_target_felica *tgt_felica; - tgt_felica = (struct pn533_target_felica *) tgt_data; + tgt_felica = (struct pn533_target_felica *)tgt_data; if (!pn533_target_felica_is_valid(tgt_felica, tgt_data_len)) return -EPROTO; @@ -1232,7 +1232,7 @@ static int pn533_target_found_jewel(struct nfc_target *nfc_tgt, u8 *tgt_data, { struct pn533_target_jewel *tgt_jewel; - tgt_jewel = (struct pn533_target_jewel *) tgt_data; + tgt_jewel = (struct pn533_target_jewel *)tgt_data; if (!pn533_target_jewel_is_valid(tgt_jewel, tgt_data_len)) return -EPROTO; @@ -1291,7 +1291,7 @@ static int pn533_target_found_type_b(struct nfc_target *nfc_tgt, u8 *tgt_data, { struct pn533_target_type_b *tgt_type_b; - tgt_type_b = (struct pn533_target_type_b *) tgt_data; + tgt_type_b = (struct pn533_target_type_b *)tgt_data; if (!pn533_target_type_b_is_valid(tgt_type_b, tgt_data_len)) return -EPROTO; @@ -1368,7 +1368,7 @@ static void pn533_poll_reset_mod_list(struct pn533 *dev) static void pn533_poll_add_mod(struct pn533 *dev, u8 mod_index) { dev->poll_mod_active[dev->poll_mod_count] = - (struct pn533_poll_modulations *) &poll_mod[mod_index]; + (struct pn533_poll_modulations *)&poll_mod[mod_index]; dev->poll_mod_count++; } @@ -1565,7 +1565,7 @@ static int pn533_init_target_complete(struct pn533 *dev, struct sk_buff *resp) static void pn533_listen_mode_timer(unsigned long data) { - struct pn533 *dev = (struct pn533 *) data; + struct pn533 *dev = (struct pn533 *)data; nfc_dev_dbg(&dev->interface->dev, "Listen mode timeout"); @@ -1789,7 +1789,7 @@ static int pn533_activate_target_nfcdep(struct pn533 *dev) if (IS_ERR(resp)) return PTR_ERR(resp); - rsp = (struct pn533_cmd_activate_response *) resp->data; + rsp = (struct pn533_cmd_activate_response *)resp->data; rc = rsp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) dev_kfree_skb(resp); @@ -1969,7 +1969,7 @@ static int pn533_mod_to_baud(struct pn533 *dev) #define PASSIVE_DATA_LEN 5 static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, - u8 comm_mode, u8* gb, size_t gb_len) + u8 comm_mode, u8 *gb, size_t gb_len) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); struct sk_buff *skb; -- cgit v1.2.3 From 5d467742bc53eff6233bd437c13dcefb449246f8 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:51 +0100 Subject: NFC: pn533: Fix open parenthesis alignment Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 41 +++++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 22 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 19fecdba611b..02043dc430b9 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -640,7 +640,7 @@ static int __pn533_send_cmd_frame_async(struct pn533 *dev, int rc; nfc_dev_dbg(&dev->interface->dev, "Sending command 0x%x", - PN533_FRAME_CMD(out_frame)); + PN533_FRAME_CMD(out_frame)); dev->cmd = PN533_FRAME_CMD(out_frame); dev->cmd_complete = cmd_complete; @@ -1107,9 +1107,9 @@ static bool pn533_target_type_a_is_valid(struct pn533_target_type_a *type_a, platconf = PN533_TYPE_A_SENS_RES_PLATCONF(type_a->sens_res); if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL && - platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || - (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && - platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) + platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || + (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && + platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) return false; /* Requirements 4.8.2.1, 4.8.2.3, 4.8.2.5 and 4.8.2.7 from NFC Forum */ @@ -1187,9 +1187,8 @@ static int pn533_target_found_felica(struct nfc_target *nfc_tgt, u8 *tgt_data, if (!pn533_target_felica_is_valid(tgt_felica, tgt_data_len)) return -EPROTO; - if (tgt_felica->nfcid2[0] == PN533_FELICA_SENSF_NFCID2_DEP_B1 && - tgt_felica->nfcid2[1] == - PN533_FELICA_SENSF_NFCID2_DEP_B2) + if ((tgt_felica->nfcid2[0] == PN533_FELICA_SENSF_NFCID2_DEP_B1) && + (tgt_felica->nfcid2[1] == PN533_FELICA_SENSF_NFCID2_DEP_B2)) nfc_tgt->supported_protocols = NFC_PROTO_NFC_DEP_MASK; else nfc_tgt->supported_protocols = NFC_PROTO_FELICA_MASK; @@ -1219,9 +1218,9 @@ static bool pn533_target_jewel_is_valid(struct pn533_target_jewel *jewel, platconf = PN533_TYPE_A_SENS_RES_PLATCONF(jewel->sens_res); if ((ssd == PN533_TYPE_A_SENS_RES_SSD_JEWEL && - platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || - (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && - platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) + platconf != PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL) || + (ssd != PN533_TYPE_A_SENS_RES_SSD_JEWEL && + platconf == PN533_TYPE_A_SENS_RES_PLATCONF_JEWEL)) return false; return true; @@ -1810,7 +1809,7 @@ static int pn533_activate_target(struct nfc_dev *nfc_dev, int rc; nfc_dev_dbg(&dev->interface->dev, "%s - protocol=%u", __func__, - protocol); + protocol); if (dev->poll_mod_count) { nfc_dev_err(&dev->interface->dev, @@ -1908,7 +1907,7 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, if (dev->tgt_available_prots && !(dev->tgt_available_prots & (1 << NFC_PROTO_NFC_DEP))) { nfc_dev_err(&dev->interface->dev, - "The target does not support DEP"); + "The target does not support DEP"); rc = -EINVAL; goto error; } @@ -1918,7 +1917,7 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg, rc = rsp->status & PN533_CMD_RET_MASK; if (rc != PN533_CMD_RET_SUCCESS) { nfc_dev_err(&dev->interface->dev, - "Bringing DEP link up failed %d", rc); + "Bringing DEP link up failed %d", rc); goto error; } @@ -1982,13 +1981,13 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, if (dev->poll_mod_count) { nfc_dev_err(&dev->interface->dev, - "Cannot bring the DEP link up while polling"); + "Cannot bring the DEP link up while polling"); return -EBUSY; } if (dev->tgt_active_prot) { nfc_dev_err(&dev->interface->dev, - "There is already an active target"); + "There is already an active target"); return -EBUSY; } @@ -2533,17 +2532,15 @@ static int pn533_probe(struct usb_interface *interface, dev->out_frame = kmalloc(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); dev->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->in_frame || !dev->out_frame || - !dev->in_urb || !dev->out_urb) + if (!dev->in_frame || !dev->out_frame || !dev->in_urb || !dev->out_urb) goto error; usb_fill_bulk_urb(dev->in_urb, dev->udev, - usb_rcvbulkpipe(dev->udev, in_endpoint), - NULL, 0, NULL, dev); + usb_rcvbulkpipe(dev->udev, in_endpoint), + NULL, 0, NULL, dev); usb_fill_bulk_urb(dev->out_urb, dev->udev, - usb_sndbulkpipe(dev->udev, out_endpoint), - NULL, 0, - pn533_send_complete, dev); + usb_sndbulkpipe(dev->udev, out_endpoint), + NULL, 0, pn533_send_complete, dev); INIT_WORK(&dev->cmd_work, pn533_wq_cmd); INIT_WORK(&dev->cmd_complete_work, pn533_wq_cmd_complete); -- cgit v1.2.3 From b08e860355ba6f67b769c9061f468f7a8856bad9 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:52 +0100 Subject: NFC: pn533: Fix minor style issues Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 02043dc430b9..2cb8ceb9be8d 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1376,13 +1376,13 @@ static void pn533_poll_create_mod_list(struct pn533 *dev, { pn533_poll_reset_mod_list(dev); - if (im_protocols & NFC_PROTO_MIFARE_MASK - || im_protocols & NFC_PROTO_ISO14443_MASK - || im_protocols & NFC_PROTO_NFC_DEP_MASK) + if ((im_protocols & NFC_PROTO_MIFARE_MASK) || + (im_protocols & NFC_PROTO_ISO14443_MASK) || + (im_protocols & NFC_PROTO_NFC_DEP_MASK)) pn533_poll_add_mod(dev, PN533_POLL_MOD_106KBPS_A); - if (im_protocols & NFC_PROTO_FELICA_MASK - || im_protocols & NFC_PROTO_NFC_DEP_MASK) { + if (im_protocols & NFC_PROTO_FELICA_MASK || + im_protocols & NFC_PROTO_NFC_DEP_MASK) { pn533_poll_add_mod(dev, PN533_POLL_MOD_212KBPS_FELICA); pn533_poll_add_mod(dev, PN533_POLL_MOD_424KBPS_FELICA); } -- cgit v1.2.3 From 89fb20256725e735601ea6439680956fa2ec4741 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:53 +0100 Subject: NFC: pn533: Remove unused pn533_send_cmd_frame_asy Remove obsolete send async api as it's no longer used. Remove global dev->in_frame as well, as each packet is kept is a seperate skb struct now, so that's not used anymore. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 75 +++++------------------------------------------------ 1 file changed, 7 insertions(+), 68 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 2cb8ceb9be8d..d17ec6a664a0 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -329,7 +329,6 @@ struct pn533 { struct pn533_frame *out_frame; struct urb *in_urb; - struct pn533_frame *in_frame; struct sk_buff_head resp_q; @@ -371,13 +370,9 @@ struct pn533 { struct pn533_cmd { struct list_head queue; - struct pn533_frame *out_frame; - struct pn533_frame *in_frame; - int in_frame_len; u8 cmd_code; struct sk_buff *req; struct sk_buff *resp; - pn533_cmd_complete_t cmd_complete; void *arg; }; @@ -911,69 +906,16 @@ static void pn533_wq_cmd(struct work_struct *work) mutex_unlock(&dev->cmd_lock); - if (cmd->cmd_code != PN533_CMD_UNDEF) - __pn533_send_cmd_frame_async(dev, - (struct pn533_frame *)cmd->req->data, - (struct pn533_frame *)cmd->resp->data, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_send_async_complete, - cmd->arg); - else - __pn533_send_cmd_frame_async(dev, cmd->out_frame, cmd->in_frame, - cmd->in_frame_len, - cmd->cmd_complete, cmd->arg); + __pn533_send_cmd_frame_async(dev, + (struct pn533_frame *)cmd->req->data, + (struct pn533_frame *)cmd->resp->data, + PN533_NORMAL_FRAME_MAX_LEN, + pn533_send_async_complete, + cmd->arg); kfree(cmd); } -static int pn533_send_cmd_frame_async(struct pn533 *dev, - struct pn533_frame *out_frame, - struct pn533_frame *in_frame, - int in_frame_len, - pn533_cmd_complete_t cmd_complete, - void *arg) -{ - struct pn533_cmd *cmd; - int rc = 0; - - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - - mutex_lock(&dev->cmd_lock); - - if (!dev->cmd_pending) { - rc = __pn533_send_cmd_frame_async(dev, out_frame, in_frame, - in_frame_len, cmd_complete, - arg); - if (!rc) - dev->cmd_pending = 1; - - goto unlock; - } - - nfc_dev_dbg(&dev->interface->dev, "%s Queueing command", __func__); - - cmd = kzalloc(sizeof(struct pn533_cmd), GFP_KERNEL); - if (!cmd) { - rc = -ENOMEM; - goto unlock; - } - - INIT_LIST_HEAD(&cmd->queue); - cmd->out_frame = out_frame; - cmd->in_frame = in_frame; - cmd->in_frame_len = in_frame_len; - cmd->cmd_code = PN533_CMD_UNDEF; - cmd->cmd_complete = cmd_complete; - cmd->arg = arg; - - list_add_tail(&cmd->queue, &dev->cmd_queue); - -unlock: - mutex_unlock(&dev->cmd_lock); - - return rc; -} - struct pn533_sync_cmd_response { struct sk_buff *resp; struct completion done; @@ -2527,12 +2469,11 @@ static int pn533_probe(struct usb_interface *interface, goto error; } - dev->in_frame = kmalloc(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); dev->in_urb = usb_alloc_urb(0, GFP_KERNEL); dev->out_frame = kmalloc(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); dev->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->in_frame || !dev->out_frame || !dev->in_urb || !dev->out_urb) + if (!dev->out_frame || !dev->in_urb || !dev->out_urb) goto error; usb_fill_bulk_urb(dev->in_urb, dev->udev, @@ -2616,7 +2557,6 @@ free_nfc_dev: destroy_wq: destroy_workqueue(dev->wq); error: - kfree(dev->in_frame); usb_free_urb(dev->in_urb); kfree(dev->out_frame); usb_free_urb(dev->out_urb); @@ -2649,7 +2589,6 @@ static void pn533_disconnect(struct usb_interface *interface) kfree(cmd); } - kfree(dev->in_frame); usb_free_urb(dev->in_urb); kfree(dev->out_frame); usb_free_urb(dev->out_urb); -- cgit v1.2.3 From f8f991710b580878c88cfe49d918cfb0c9e15236 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:54 +0100 Subject: NFC: pn533: Fix urb->status handling Fix text message to be more suitable for the error code and treat ESHUTDOWN as an error not debug msg. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 34 ++++++++++++++++++---------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index d17ec6a664a0..898375d95f36 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -505,18 +505,19 @@ static void pn533_recv_response(struct urb *urb) switch (urb->status) { case 0: - /* success */ - break; + break; /* success */ case -ECONNRESET: case -ENOENT: - case -ESHUTDOWN: nfc_dev_dbg(&dev->interface->dev, - "Urb shutting down with status: %d", urb->status); + "The urb has been canceled (status %d)", + urb->status); dev->wq_in_error = urb->status; goto sched_wq; + break; + case -ESHUTDOWN: default: nfc_dev_err(&dev->interface->dev, - "Nonzero urb status received: %d", urb->status); + "Urb failure (status %d)", urb->status); dev->wq_in_error = urb->status; goto sched_wq; } @@ -562,18 +563,19 @@ static void pn533_recv_ack(struct urb *urb) switch (urb->status) { case 0: - /* success */ - break; + break; /* success */ case -ECONNRESET: case -ENOENT: - case -ESHUTDOWN: nfc_dev_dbg(&dev->interface->dev, - "Urb shutting down with status: %d", urb->status); + "The urb has been stopped (status %d)", + urb->status); dev->wq_in_error = urb->status; goto sched_wq; + break; + case -ESHUTDOWN: default: nfc_dev_err(&dev->interface->dev, - "Nonzero urb status received: %d", urb->status); + "Urb failure (status %d)", urb->status); dev->wq_in_error = urb->status; goto sched_wq; } @@ -981,17 +983,17 @@ static void pn533_send_complete(struct urb *urb) switch (urb->status) { case 0: - /* success */ - break; + break; /* success */ case -ECONNRESET: case -ENOENT: - case -ESHUTDOWN: nfc_dev_dbg(&dev->interface->dev, - "Urb shutting down with status: %d", urb->status); + "The urb has been stopped (status %d)", + urb->status); break; + case -ESHUTDOWN: default: - nfc_dev_dbg(&dev->interface->dev, - "Nonzero urb status received: %d", urb->status); + nfc_dev_err(&dev->interface->dev, + "Urb failure (status %d)", urb->status); } } -- cgit v1.2.3 From fcfafc7690164d08dfd8133a860f25db8019ca2e Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:55 +0100 Subject: NFC: pn533: Cleanup debug messages Remove debug messages which do not include valueable informations in debug mode. Add some new ones for better tracking or reword when if necessary. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 32 +++++++------------------------- 1 file changed, 7 insertions(+), 25 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 898375d95f36..5fb5b8f1ef3f 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -524,6 +524,7 @@ static void pn533_recv_response(struct urb *urb) in_frame = dev->in_urb->transfer_buffer; + nfc_dev_dbg(&dev->interface->dev, "Received a frame."); print_hex_dump(KERN_DEBUG, "PN533 RX: ", DUMP_PREFIX_NONE, 16, 1, in_frame, PN533_FRAME_SIZE(in_frame), false); @@ -540,7 +541,6 @@ static void pn533_recv_response(struct urb *urb) goto sched_wq; } - nfc_dev_dbg(&dev->interface->dev, "Received a valid frame"); dev->wq_in_error = 0; dev->wq_in_frame = in_frame; @@ -588,8 +588,6 @@ static void pn533_recv_ack(struct urb *urb) goto sched_wq; } - nfc_dev_dbg(&dev->interface->dev, "Received a valid ack"); - rc = pn533_submit_urb_for_response(dev, GFP_ATOMIC); if (rc) { nfc_dev_err(&dev->interface->dev, @@ -636,9 +634,6 @@ static int __pn533_send_cmd_frame_async(struct pn533 *dev, { int rc; - nfc_dev_dbg(&dev->interface->dev, "Sending command 0x%x", - PN533_FRAME_CMD(out_frame)); - dev->cmd = PN533_FRAME_CMD(out_frame); dev->cmd_complete = cmd_complete; dev->cmd_complete_arg = arg; @@ -705,10 +700,6 @@ static int pn533_send_async_complete(struct pn533 *dev, void *_arg, u8 *params, dev_kfree_skb(req); if (params_len < 0) { - nfc_dev_err(&dev->interface->dev, - "Error %d when starting as a target", - params_len); - arg->complete_cb(dev, arg->complete_cb_context, ERR_PTR(params_len)); rc = params_len; @@ -737,7 +728,7 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, struct pn533_send_async_complete_arg *arg; int rc = 0; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + nfc_dev_dbg(&dev->interface->dev, "Sending command 0x%x", cmd_code); arg = kzalloc(sizeof(arg), GFP_KERNEL); if (!arg) @@ -765,7 +756,8 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, goto unlock; } - nfc_dev_dbg(&dev->interface->dev, "%s Queueing command", __func__); + nfc_dev_dbg(&dev->interface->dev, "%s Queueing command 0x%x", __func__, + cmd_code); cmd = kzalloc(sizeof(struct pn533_cmd), GFP_KERNEL); if (!cmd) { @@ -801,8 +793,6 @@ static int pn533_send_data_async(struct pn533 *dev, u8 cmd_code, PN533_FRAME_MAX_PAYLOAD_LEN + PN533_FRAME_TAIL_LEN; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - resp = nfc_alloc_recv_skb(resp_len, GFP_KERNEL); if (!resp) return -ENOMEM; @@ -823,8 +813,6 @@ static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, struct sk_buff *resp; int rc; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - resp = alloc_skb(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); if (!resp) return -ENOMEM; @@ -858,8 +846,6 @@ static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, PN533_FRAME_MAX_PAYLOAD_LEN + PN533_FRAME_TAIL_LEN; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - resp = alloc_skb(resp_len, GFP_KERNEL); if (!resp) return -ENOMEM; @@ -928,8 +914,6 @@ static int pn533_send_sync_complete(struct pn533 *dev, void *_arg, { struct pn533_sync_cmd_response *arg = _arg; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - arg->resp = resp; complete(&arg->done); @@ -959,8 +943,6 @@ static struct sk_buff *pn533_send_cmd_sync(struct pn533 *dev, u8 cmd_code, int rc; struct pn533_sync_cmd_response arg; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - init_completion(&arg.done); rc = pn533_send_cmd_async(dev, cmd_code, req, @@ -979,8 +961,6 @@ static void pn533_send_complete(struct urb *urb) { struct pn533 *dev = urb->context; - nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - switch (urb->status) { case 0: break; /* success */ @@ -1992,6 +1972,8 @@ static int pn533_dep_link_down(struct nfc_dev *nfc_dev) { struct pn533 *dev = nfc_get_drvdata(nfc_dev); + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); + pn533_poll_reset_mod_list(dev); if (dev->tgt_mode || dev->tgt_active_prot) { @@ -2017,7 +1999,7 @@ static struct sk_buff *pn533_build_response(struct pn533 *dev) struct sk_buff *skb, *tmp, *t; unsigned int skb_len = 0, tmp_len = 0; - nfc_dev_dbg(&dev->interface->dev, "%s\n", __func__); + nfc_dev_dbg(&dev->interface->dev, "%s", __func__); if (skb_queue_empty(&dev->resp_q)) return NULL; -- cgit v1.2.3 From 5b5a4437ae078cbe35020e74eb0b66ebedc2a2c0 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:56 +0100 Subject: NFC: pn533: Don't use out_frame in pn533_send_ack dev->out_frame buffer is much bigger for ACK frame needs. Use local buffer instead. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 31 ++++++------------------------- 1 file changed, 6 insertions(+), 25 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 5fb5b8f1ef3f..5bc0c7cfea9a 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -94,7 +94,8 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_FRAME_SIZE(f) (sizeof(struct pn533_frame) + f->datalen + \ PN533_FRAME_TAIL_LEN) -#define PN533_FRAME_ACK_SIZE (sizeof(struct pn533_frame) + 1) +#define PN533_FRAME_ACK_SIZE 6 /* Preamble (1), SoPC (2), ACK Code (2), + Postamble (1) */ #define PN533_FRAME_CHECKSUM(f) (f->data[f->datalen]) #define PN533_FRAME_POSTAMBLE(f) (f->data[f->datalen + 1]) @@ -402,26 +403,6 @@ static u8 pn533_data_checksum(u8 *data, int datalen) return pn533_checksum(sum); } -/** - * pn533_tx_frame_ack - create a ack frame - * @frame: The frame to be set as ack - * - * Ack is different type of standard frame. As a standard frame, it has - * preamble and start_frame. However the checksum of this frame must fail, - * i.e. datalen + datalen_checksum must NOT be zero. When the checksum test - * fails and datalen = 0 and datalen_checksum = 0xFF, the frame is a ack. - * After datalen_checksum field, the postamble is placed. - */ -static void pn533_tx_frame_ack(struct pn533_frame *frame) -{ - frame->preamble = 0; - frame->start_frame = cpu_to_be16(PN533_SOF); - frame->datalen = 0; - frame->datalen_checksum = 0xFF; - /* data[0] is used as postamble */ - frame->data[0] = 0; -} - static void pn533_tx_frame_init(struct pn533_frame *frame, u8 cmd) { frame->preamble = 0; @@ -612,14 +593,14 @@ static int pn533_submit_urb_for_ack(struct pn533 *dev, gfp_t flags) static int pn533_send_ack(struct pn533 *dev, gfp_t flags) { + u8 ack[PN533_FRAME_ACK_SIZE] = {0x00, 0x00, 0xff, 0x00, 0xff, 0x00}; + /* spec 7.1.1.3: Preamble, SoPC (2), ACK Code (2), Postamble */ int rc; nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - pn533_tx_frame_ack(dev->out_frame); - - dev->out_urb->transfer_buffer = dev->out_frame; - dev->out_urb->transfer_buffer_length = PN533_FRAME_ACK_SIZE; + dev->out_urb->transfer_buffer = ack; + dev->out_urb->transfer_buffer_length = sizeof(ack); rc = usb_submit_urb(dev->out_urb, flags); return rc; -- cgit v1.2.3 From e8f40531113c7e8c6266886803d5bf3a9e5c8d1b Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:57 +0100 Subject: NFC: pn533: Use skb in __pn533_send_cmd_frame_asyn __pn533_send_cmd_frame_async() should be frame type independent. So, don't use pn533_frame type params and instead use skb for req and resp pointers. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 44 ++++++++++++++++++-------------------------- 1 file changed, 18 insertions(+), 26 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 5bc0c7cfea9a..cfbfc1183926 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -606,28 +606,27 @@ static int pn533_send_ack(struct pn533 *dev, gfp_t flags) return rc; } -static int __pn533_send_cmd_frame_async(struct pn533 *dev, - struct pn533_frame *out_frame, - struct pn533_frame *in_frame, - int in_frame_len, +static int __pn533_send_frame_async(struct pn533 *dev, + struct sk_buff *out, + struct sk_buff *in, + int in_len, pn533_cmd_complete_t cmd_complete, void *arg) { int rc; - dev->cmd = PN533_FRAME_CMD(out_frame); + dev->cmd = PN533_FRAME_CMD(((struct pn533_frame *)out->data)); dev->cmd_complete = cmd_complete; dev->cmd_complete_arg = arg; - dev->out_urb->transfer_buffer = out_frame; - dev->out_urb->transfer_buffer_length = - PN533_FRAME_SIZE(out_frame); + dev->out_urb->transfer_buffer = out->data; + dev->out_urb->transfer_buffer_length = out->len; - dev->in_urb->transfer_buffer = in_frame; - dev->in_urb->transfer_buffer_length = in_frame_len; + dev->in_urb->transfer_buffer = in->data; + dev->in_urb->transfer_buffer_length = in_len; print_hex_dump(KERN_DEBUG, "PN533 TX: ", DUMP_PREFIX_NONE, 16, 1, - out_frame, PN533_FRAME_SIZE(out_frame), false); + out->data, out->len, false); rc = usb_submit_urb(dev->out_urb, GFP_KERNEL); if (rc) @@ -725,11 +724,8 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, mutex_lock(&dev->cmd_lock); if (!dev->cmd_pending) { - rc = __pn533_send_cmd_frame_async(dev, - (struct pn533_frame *)req->data, - (struct pn533_frame *)resp->data, - resp_len, pn533_send_async_complete, - arg); + rc = __pn533_send_frame_async(dev, req, resp, resp_len, + pn533_send_async_complete, arg); if (rc) goto error; @@ -844,10 +840,8 @@ static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, pn533_build_cmd_frame(cmd_code, req); - rc = __pn533_send_cmd_frame_async(dev, (struct pn533_frame *)req->data, - (struct pn533_frame *)resp->data, - resp_len, pn533_send_async_complete, - arg); + rc = __pn533_send_frame_async(dev, req, resp, resp_len, + pn533_send_async_complete, arg); if (rc < 0) { dev_kfree_skb(resp); kfree(arg); @@ -875,12 +869,10 @@ static void pn533_wq_cmd(struct work_struct *work) mutex_unlock(&dev->cmd_lock); - __pn533_send_cmd_frame_async(dev, - (struct pn533_frame *)cmd->req->data, - (struct pn533_frame *)cmd->resp->data, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_send_async_complete, - cmd->arg); + __pn533_send_frame_async(dev, cmd->req, cmd->resp, + PN533_NORMAL_FRAME_MAX_LEN, + pn533_send_async_complete, + cmd->arg); kfree(cmd); } -- cgit v1.2.3 From a5798094e927847f0d503b756a997175d7ce01ec Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:58 +0100 Subject: NFC: pn533: Remove deprecated dev->out_frame buff As it's not used anymore get rid of that buffer. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index cfbfc1183926..82867a036ccc 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -327,8 +327,6 @@ struct pn533 { struct nfc_dev *nfc_dev; struct urb *out_urb; - struct pn533_frame *out_frame; - struct urb *in_urb; struct sk_buff_head resp_q; @@ -2427,10 +2425,9 @@ static int pn533_probe(struct usb_interface *interface, } dev->in_urb = usb_alloc_urb(0, GFP_KERNEL); - dev->out_frame = kmalloc(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); dev->out_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!dev->out_frame || !dev->in_urb || !dev->out_urb) + if (!dev->in_urb || !dev->out_urb) goto error; usb_fill_bulk_urb(dev->in_urb, dev->udev, @@ -2515,7 +2512,6 @@ destroy_wq: destroy_workqueue(dev->wq); error: usb_free_urb(dev->in_urb); - kfree(dev->out_frame); usb_free_urb(dev->out_urb); kfree(dev); return rc; @@ -2547,7 +2543,6 @@ static void pn533_disconnect(struct usb_interface *interface) } usb_free_urb(dev->in_urb); - kfree(dev->out_frame); usb_free_urb(dev->out_urb); kfree(dev); -- cgit v1.2.3 From 0c33d2626d651f3f52d6a1e8b612e2830a4ab71f Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:42:59 +0100 Subject: NFC: pn533: Cleanup pn533_cmd_complete_t 'params' arg in pn533_cmd_complete_t definition has been deprecated and currently is not in use (resp skb is pass in arg ptr), so remove it. Also 'params_len' arg is used as a transfer status indicator, so simply reword it appropriately. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 29 +++++++---------------------- 1 file changed, 7 insertions(+), 22 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 82867a036ccc..db13cd798149 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -109,8 +109,6 @@ MODULE_DEVICE_TABLE(usb, pn533_table); /* PN533 Commands */ #define PN533_FRAME_CMD(f) (f->data[1]) -#define PN533_FRAME_CMD_PARAMS_PTR(f) (&f->data[2]) -#define PN533_FRAME_CMD_PARAMS_LEN(f) (f->datalen - 2) #define PN533_CMD_GET_FIRMWARE_VERSION 0x02 #define PN533_CMD_RF_CONFIGURATION 0x32 @@ -135,8 +133,7 @@ MODULE_DEVICE_TABLE(usb, pn533_table); struct pn533; -typedef int (*pn533_cmd_complete_t) (struct pn533 *dev, void *arg, - u8 *params, int params_len); +typedef int (*pn533_cmd_complete_t) (struct pn533 *dev, void *arg, int status); typedef int (*pn533_send_async_complete_t) (struct pn533 *dev, void *arg, struct sk_buff *resp); @@ -458,19 +455,9 @@ static bool pn533_rx_frame_is_cmd_response(struct pn533_frame *frame, u8 cmd) static void pn533_wq_cmd_complete(struct work_struct *work) { struct pn533 *dev = container_of(work, struct pn533, cmd_complete_work); - struct pn533_frame *in_frame; int rc; - in_frame = dev->wq_in_frame; - - if (dev->wq_in_error) - rc = dev->cmd_complete(dev, dev->cmd_complete_arg, NULL, - dev->wq_in_error); - else - rc = dev->cmd_complete(dev, dev->cmd_complete_arg, - PN533_FRAME_CMD_PARAMS_PTR(in_frame), - PN533_FRAME_CMD_PARAMS_LEN(in_frame)); - + rc = dev->cmd_complete(dev, dev->cmd_complete_arg, dev->wq_in_error); if (rc != -EINPROGRESS) queue_work(dev->wq, &dev->cmd_work); } @@ -664,8 +651,7 @@ struct pn533_send_async_complete_arg { struct sk_buff *req; }; -static int pn533_send_async_complete(struct pn533 *dev, void *_arg, u8 *params, - int params_len) +static int pn533_send_async_complete(struct pn533 *dev, void *_arg, int status) { struct pn533_send_async_complete_arg *arg = _arg; @@ -677,12 +663,12 @@ static int pn533_send_async_complete(struct pn533 *dev, void *_arg, u8 *params, dev_kfree_skb(req); - if (params_len < 0) { + if (status < 0) { arg->complete_cb(dev, arg->complete_cb_context, - ERR_PTR(params_len)); - rc = params_len; + ERR_PTR(status)); dev_kfree_skb(resp); - goto out; + kfree(arg); + return status; } skb_put(resp, PN533_FRAME_SIZE(frame)); @@ -691,7 +677,6 @@ static int pn533_send_async_complete(struct pn533 *dev, void *_arg, u8 *params, rc = arg->complete_cb(dev, arg->complete_cb_context, resp); -out: kfree(arg); return rc; } -- cgit v1.2.3 From 16f7541914e8bee0e76c510c4d8bc5ad8a5edf00 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:43:00 +0100 Subject: NFC: pn533: Remove unused dev->wq_in_frame Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index db13cd798149..58f7f2cc6ae9 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -335,7 +335,6 @@ struct pn533 { struct work_struct mi_work; struct work_struct tg_work; struct timer_list listen_timer; - struct pn533_frame *wq_in_frame; int wq_in_error; int cancel_listen; @@ -467,8 +466,6 @@ static void pn533_recv_response(struct urb *urb) struct pn533 *dev = urb->context; struct pn533_frame *in_frame; - dev->wq_in_frame = NULL; - switch (urb->status) { case 0: break; /* success */ @@ -508,7 +505,6 @@ static void pn533_recv_response(struct urb *urb) } dev->wq_in_error = 0; - dev->wq_in_frame = in_frame; sched_wq: queue_work(dev->wq, &dev->cmd_complete_work); @@ -565,7 +561,6 @@ static void pn533_recv_ack(struct urb *urb) return; sched_wq: - dev->wq_in_frame = NULL; queue_work(dev->wq, &dev->cmd_complete_work); } -- cgit v1.2.3 From 9e2d493e74aca105aa86de56dbf80a0a654c4c53 Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Mon, 10 Dec 2012 14:43:01 +0100 Subject: NFC: pn533: Introduce ops for frame logic Encapsulate whole frame logic (tx/rx frame structure and size) inside the ops structure to make the core driver generic for devices which handle frames in non standard menner (different then pn533 spec say). Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 208 ++++++++++++++++++++++++++++++++++------------------ 1 file changed, 135 insertions(+), 73 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 58f7f2cc6ae9..e8c083203b33 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -79,9 +79,6 @@ MODULE_DEVICE_TABLE(usb, pn533_table); #define PN533_LISTEN_TIME 2 /* frame definitions */ -#define PN533_NORMAL_FRAME_MAX_LEN 262 /* 6 (PREAMBLE, SOF, LEN, LCS, TFI) - 254 (DATA) - 2 (DCS, postamble) */ #define PN533_FRAME_HEADER_LEN (sizeof(struct pn533_frame) \ + 2) /* data[0] TFI, data[1] CC */ #define PN533_FRAME_TAIL_LEN 2 /* data[len] DCS, data[len + 1] postamble*/ @@ -92,8 +89,6 @@ MODULE_DEVICE_TABLE(usb, pn533_table); */ #define PN533_FRAME_MAX_PAYLOAD_LEN 263 -#define PN533_FRAME_SIZE(f) (sizeof(struct pn533_frame) + f->datalen + \ - PN533_FRAME_TAIL_LEN) #define PN533_FRAME_ACK_SIZE 6 /* Preamble (1), SoPC (2), ACK Code (2), Postamble (1) */ #define PN533_FRAME_CHECKSUM(f) (f->data[f->datalen]) @@ -361,6 +356,8 @@ struct pn533 { struct list_head cmd_queue; u8 cmd_pending; + + struct pn533_frame_ops *ops; }; struct pn533_cmd { @@ -368,6 +365,7 @@ struct pn533_cmd { u8 cmd_code; struct sk_buff *req; struct sk_buff *resp; + int resp_len; void *arg; }; @@ -379,6 +377,22 @@ struct pn533_frame { u8 data[]; } __packed; +struct pn533_frame_ops { + void (*tx_frame_init)(void *frame, u8 cmd_code); + void (*tx_frame_finish)(void *frame); + void (*tx_update_payload_len)(void *frame, int len); + int tx_header_len; + int tx_tail_len; + + bool (*rx_is_frame_valid)(void *frame); + int (*rx_frame_size)(void *frame); + int rx_header_len; + int rx_tail_len; + + int max_payload_len; + u8 (*get_cmd_code)(void *frame); +}; + /* The rule: value + checksum = 0 */ static inline u8 pn533_checksum(u8 value) { @@ -397,17 +411,21 @@ static u8 pn533_data_checksum(u8 *data, int datalen) return pn533_checksum(sum); } -static void pn533_tx_frame_init(struct pn533_frame *frame, u8 cmd) +static void pn533_tx_frame_init(void *_frame, u8 cmd_code) { + struct pn533_frame *frame = _frame; + frame->preamble = 0; frame->start_frame = cpu_to_be16(PN533_SOF); PN533_FRAME_IDENTIFIER(frame) = PN533_DIR_OUT; - PN533_FRAME_CMD(frame) = cmd; + PN533_FRAME_CMD(frame) = cmd_code; frame->datalen = 2; } -static void pn533_tx_frame_finish(struct pn533_frame *frame) +static void pn533_tx_frame_finish(void *_frame) { + struct pn533_frame *frame = _frame; + frame->datalen_checksum = pn533_checksum(frame->datalen); PN533_FRAME_CHECKSUM(frame) = @@ -416,9 +434,17 @@ static void pn533_tx_frame_finish(struct pn533_frame *frame) PN533_FRAME_POSTAMBLE(frame) = 0; } -static bool pn533_rx_frame_is_valid(struct pn533_frame *frame) +static void pn533_tx_update_payload_len(void *_frame, int len) +{ + struct pn533_frame *frame = _frame; + + frame->datalen += len; +} + +static bool pn533_rx_frame_is_valid(void *_frame) { u8 checksum; + struct pn533_frame *frame = _frame; if (frame->start_frame != cpu_to_be16(PN533_SOF)) return false; @@ -445,9 +471,39 @@ static bool pn533_rx_frame_is_ack(struct pn533_frame *frame) return true; } -static bool pn533_rx_frame_is_cmd_response(struct pn533_frame *frame, u8 cmd) +static inline int pn533_rx_frame_size(void *frame) +{ + struct pn533_frame *f = frame; + + return sizeof(struct pn533_frame) + f->datalen + PN533_FRAME_TAIL_LEN; +} + +static u8 pn533_get_cmd_code(void *frame) +{ + struct pn533_frame *f = frame; + + return PN533_FRAME_CMD(f); +} + +struct pn533_frame_ops pn533_std_frame_ops = { + .tx_frame_init = pn533_tx_frame_init, + .tx_frame_finish = pn533_tx_frame_finish, + .tx_update_payload_len = pn533_tx_update_payload_len, + .tx_header_len = PN533_FRAME_HEADER_LEN, + .tx_tail_len = PN533_FRAME_TAIL_LEN, + + .rx_is_frame_valid = pn533_rx_frame_is_valid, + .rx_frame_size = pn533_rx_frame_size, + .rx_header_len = PN533_FRAME_HEADER_LEN, + .rx_tail_len = PN533_FRAME_TAIL_LEN, + + .max_payload_len = PN533_FRAME_MAX_PAYLOAD_LEN, + .get_cmd_code = pn533_get_cmd_code, +}; + +static bool pn533_rx_frame_is_cmd_response(struct pn533 *dev, void *frame) { - return (PN533_FRAME_CMD(frame) == PN533_CMD_RESPONSE(cmd)); + return (dev->ops->get_cmd_code(frame) == PN533_CMD_RESPONSE(dev->cmd)); } @@ -464,7 +520,7 @@ static void pn533_wq_cmd_complete(struct work_struct *work) static void pn533_recv_response(struct urb *urb) { struct pn533 *dev = urb->context; - struct pn533_frame *in_frame; + u8 *in_frame; switch (urb->status) { case 0: @@ -489,15 +545,15 @@ static void pn533_recv_response(struct urb *urb) nfc_dev_dbg(&dev->interface->dev, "Received a frame."); print_hex_dump(KERN_DEBUG, "PN533 RX: ", DUMP_PREFIX_NONE, 16, 1, - in_frame, PN533_FRAME_SIZE(in_frame), false); + in_frame, dev->ops->rx_frame_size(in_frame), false); - if (!pn533_rx_frame_is_valid(in_frame)) { + if (!dev->ops->rx_is_frame_valid(in_frame)) { nfc_dev_err(&dev->interface->dev, "Received an invalid frame"); dev->wq_in_error = -EIO; goto sched_wq; } - if (!pn533_rx_frame_is_cmd_response(in_frame, dev->cmd)) { + if (!pn533_rx_frame_is_cmd_response(dev, in_frame)) { nfc_dev_err(&dev->interface->dev, "It it not the response to the last command"); dev->wq_in_error = -EIO; @@ -595,7 +651,7 @@ static int __pn533_send_frame_async(struct pn533 *dev, { int rc; - dev->cmd = PN533_FRAME_CMD(((struct pn533_frame *)out->data)); + dev->cmd = dev->ops->get_cmd_code(out->data); dev->cmd_complete = cmd_complete; dev->cmd_complete_arg = arg; @@ -623,20 +679,20 @@ error: return rc; } -static void pn533_build_cmd_frame(u8 cmd_code, struct sk_buff *skb) +static void pn533_build_cmd_frame(struct pn533 *dev, u8 cmd_code, + struct sk_buff *skb) { - struct pn533_frame *frame; /* payload is already there, just update datalen */ int payload_len = skb->len; + struct pn533_frame_ops *ops = dev->ops; - skb_push(skb, PN533_FRAME_HEADER_LEN); - skb_put(skb, PN533_FRAME_TAIL_LEN); - frame = (struct pn533_frame *)skb->data; + skb_push(skb, ops->tx_header_len); + skb_put(skb, ops->tx_tail_len); - pn533_tx_frame_init(frame, cmd_code); - frame->datalen += payload_len; - pn533_tx_frame_finish(frame); + ops->tx_frame_init(skb->data, cmd_code); + ops->tx_update_payload_len(skb->data, payload_len); + ops->tx_frame_finish(skb->data); } struct pn533_send_async_complete_arg { @@ -653,7 +709,6 @@ static int pn533_send_async_complete(struct pn533 *dev, void *_arg, int status) struct sk_buff *req = arg->req; struct sk_buff *resp = arg->resp; - struct pn533_frame *frame = (struct pn533_frame *)resp->data; int rc; dev_kfree_skb(req); @@ -666,9 +721,9 @@ static int pn533_send_async_complete(struct pn533 *dev, void *_arg, int status) return status; } - skb_put(resp, PN533_FRAME_SIZE(frame)); - skb_pull(resp, PN533_FRAME_HEADER_LEN); - skb_trim(resp, resp->len - PN533_FRAME_TAIL_LEN); + skb_put(resp, dev->ops->rx_frame_size(resp->data)); + skb_pull(resp, dev->ops->rx_header_len); + skb_trim(resp, resp->len - dev->ops->rx_tail_len); rc = arg->complete_cb(dev, arg->complete_cb_context, resp); @@ -697,7 +752,7 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, arg->resp = resp; arg->req = req; - pn533_build_cmd_frame(cmd_code, req); + pn533_build_cmd_frame(dev, cmd_code, req); mutex_lock(&dev->cmd_lock); @@ -724,6 +779,7 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, cmd->cmd_code = cmd_code; cmd->req = req; cmd->resp = resp; + cmd->resp_len = resp_len; cmd->arg = arg; list_add_tail(&cmd->queue, &dev->cmd_queue); @@ -744,9 +800,9 @@ static int pn533_send_data_async(struct pn533 *dev, u8 cmd_code, { struct sk_buff *resp; int rc; - int resp_len = PN533_FRAME_HEADER_LEN + - PN533_FRAME_MAX_PAYLOAD_LEN + - PN533_FRAME_TAIL_LEN; + int resp_len = dev->ops->rx_header_len + + dev->ops->max_payload_len + + dev->ops->rx_tail_len; resp = nfc_alloc_recv_skb(resp_len, GFP_KERNEL); if (!resp) @@ -767,14 +823,16 @@ static int pn533_send_cmd_async(struct pn533 *dev, u8 cmd_code, { struct sk_buff *resp; int rc; + int resp_len = dev->ops->rx_header_len + + dev->ops->max_payload_len + + dev->ops->rx_tail_len; - resp = alloc_skb(PN533_NORMAL_FRAME_MAX_LEN, GFP_KERNEL); + resp = alloc_skb(resp_len, GFP_KERNEL); if (!resp) return -ENOMEM; - rc = __pn533_send_async(dev, cmd_code, req, resp, - PN533_NORMAL_FRAME_MAX_LEN, - complete_cb, complete_cb_context); + rc = __pn533_send_async(dev, cmd_code, req, resp, resp_len, complete_cb, + complete_cb_context); if (rc) dev_kfree_skb(resp); @@ -797,9 +855,9 @@ static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, struct pn533_send_async_complete_arg *arg; struct sk_buff *resp; int rc; - int resp_len = PN533_FRAME_HEADER_LEN + - PN533_FRAME_MAX_PAYLOAD_LEN + - PN533_FRAME_TAIL_LEN; + int resp_len = dev->ops->rx_header_len + + dev->ops->max_payload_len + + dev->ops->rx_tail_len; resp = alloc_skb(resp_len, GFP_KERNEL); if (!resp) @@ -816,7 +874,7 @@ static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, arg->resp = resp; arg->req = req; - pn533_build_cmd_frame(cmd_code, req); + pn533_build_cmd_frame(dev, cmd_code, req); rc = __pn533_send_frame_async(dev, req, resp, resp_len, pn533_send_async_complete, arg); @@ -847,10 +905,8 @@ static void pn533_wq_cmd(struct work_struct *work) mutex_unlock(&dev->cmd_lock); - __pn533_send_frame_async(dev, cmd->req, cmd->resp, - PN533_NORMAL_FRAME_MAX_LEN, - pn533_send_async_complete, - cmd->arg); + __pn533_send_frame_async(dev, cmd->req, cmd->resp, cmd->resp_len, + pn533_send_async_complete, cmd->arg); kfree(cmd); } @@ -928,16 +984,16 @@ static void pn533_send_complete(struct urb *urb) } } -static struct sk_buff *pn533_alloc_skb(unsigned int size) +static struct sk_buff *pn533_alloc_skb(struct pn533 *dev, unsigned int size) { struct sk_buff *skb; - skb = alloc_skb(PN533_FRAME_HEADER_LEN + + skb = alloc_skb(dev->ops->tx_header_len + size + - PN533_FRAME_TAIL_LEN, GFP_KERNEL); + dev->ops->tx_tail_len, GFP_KERNEL); if (skb) - skb_reserve(skb, PN533_FRAME_HEADER_LEN); + skb_reserve(skb, dev->ops->tx_header_len); return skb; } @@ -1297,11 +1353,14 @@ static int pn533_start_poll_complete(struct pn533 *dev, struct sk_buff *resp) return -EAGAIN; } -static struct sk_buff *pn533_alloc_poll_tg_frame(u8 *gbytes, size_t gbytes_len) +static struct sk_buff *pn533_alloc_poll_tg_frame(struct pn533 *dev) { struct sk_buff *skb; u8 *felica, *nfcid3, *gb; + u8 *gbytes = dev->gb; + size_t gbytes_len = dev->gb_len; + u8 felica_params[18] = {0x1, 0xfe, /* DEP */ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, /* random */ 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @@ -1316,7 +1375,7 @@ static struct sk_buff *pn533_alloc_poll_tg_frame(u8 *gbytes, size_t gbytes_len) gbytes_len + 1; /* len Tk*/ - skb = pn533_alloc_skb(skb_len); + skb = pn533_alloc_skb(dev, skb_len); if (!skb) return NULL; @@ -1382,7 +1441,7 @@ static void pn533_wq_tg_get_data(struct work_struct *work) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb = pn533_alloc_skb(0); + skb = pn533_alloc_skb(dev, 0); if (!skb) return; @@ -1507,12 +1566,12 @@ stop_poll: return rc; } -static struct sk_buff *pn533_alloc_poll_in_frame(struct pn533_poll_modulations - *mod) +static struct sk_buff *pn533_alloc_poll_in_frame(struct pn533 *dev, + struct pn533_poll_modulations *mod) { struct sk_buff *skb; - skb = pn533_alloc_skb(mod->len); + skb = pn533_alloc_skb(dev, mod->len); if (!skb) return NULL; @@ -1535,10 +1594,10 @@ static int pn533_send_poll_frame(struct pn533 *dev) if (mod->len == 0) { /* Listen mode */ cmd_code = PN533_CMD_TG_INIT_AS_TARGET; - skb = pn533_alloc_poll_tg_frame(dev->gb, dev->gb_len); + skb = pn533_alloc_poll_tg_frame(dev); } else { /* Polling mode */ cmd_code = PN533_CMD_IN_LIST_PASSIVE_TARGET; - skb = pn533_alloc_poll_in_frame(mod); + skb = pn533_alloc_poll_in_frame(dev, mod); } if (!skb) { @@ -1652,7 +1711,7 @@ static int pn533_activate_target_nfcdep(struct pn533 *dev) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb = pn533_alloc_skb(sizeof(u8) * 2); /*TG + Next*/ + skb = pn533_alloc_skb(dev, sizeof(u8) * 2); /*TG + Next*/ if (!skb) return -ENOMEM; @@ -1746,7 +1805,7 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev, dev->tgt_active_prot = 0; skb_queue_purge(&dev->resp_q); - skb = pn533_alloc_skb(sizeof(u8)); + skb = pn533_alloc_skb(dev, sizeof(u8)); if (!skb) return; @@ -1877,7 +1936,7 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target, if (comm_mode == NFC_COMM_PASSIVE) skb_len += PASSIVE_DATA_LEN; - skb = pn533_alloc_skb(skb_len); + skb = pn533_alloc_skb(dev, skb_len); if (!skb) return -ENOMEM; @@ -2161,7 +2220,7 @@ static void pn533_wq_mi_recv(struct work_struct *work) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb = pn533_alloc_skb(PN533_CMD_DATAEXCH_HEAD_LEN); + skb = pn533_alloc_skb(dev, PN533_CMD_DATAEXCH_HEAD_LEN); if (!skb) goto error; @@ -2214,7 +2273,7 @@ static int pn533_set_configuration(struct pn533 *dev, u8 cfgitem, u8 *cfgdata, skb_len = sizeof(cfgitem) + cfgdata_len; /* cfgitem + cfgdata */ - skb = pn533_alloc_skb(skb_len); + skb = pn533_alloc_skb(dev, skb_len); if (!skb) return -ENOMEM; @@ -2235,7 +2294,7 @@ static int pn533_get_firmware_version(struct pn533 *dev, struct sk_buff *skb; struct sk_buff *resp; - skb = pn533_alloc_skb(0); + skb = pn533_alloc_skb(dev, 0); if (!skb) return -ENOMEM; @@ -2259,7 +2318,7 @@ static int pn533_fw_reset(struct pn533 *dev) nfc_dev_dbg(&dev->interface->dev, "%s", __func__); - skb = pn533_alloc_skb(sizeof(u8)); + skb = pn533_alloc_skb(dev, sizeof(u8)); if (!skb) return -ENOMEM; @@ -2436,14 +2495,7 @@ static int pn533_probe(struct usb_interface *interface, usb_set_intfdata(interface, dev); - memset(&fw_ver, 0, sizeof(fw_ver)); - rc = pn533_get_firmware_version(dev, &fw_ver); - if (rc < 0) - goto destroy_wq; - - nfc_dev_info(&dev->interface->dev, - "NXP PN533 firmware ver %d.%d now attached", - fw_ver.ver, fw_ver.rev); + dev->ops = &pn533_std_frame_ops; dev->device_type = id->driver_info; switch (dev->device_type) { @@ -2462,10 +2514,20 @@ static int pn533_probe(struct usb_interface *interface, goto destroy_wq; } + memset(&fw_ver, 0, sizeof(fw_ver)); + rc = pn533_get_firmware_version(dev, &fw_ver); + if (rc < 0) + goto destroy_wq; + + nfc_dev_info(&dev->interface->dev, + "NXP PN533 firmware ver %d.%d now attached", + fw_ver.ver, fw_ver.rev); + + dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols, - PN533_FRAME_HEADER_LEN + + dev->ops->tx_header_len + PN533_CMD_DATAEXCH_HEAD_LEN, - PN533_FRAME_TAIL_LEN); + dev->ops->tx_tail_len); if (!dev->nfc_dev) goto destroy_wq; -- cgit v1.2.3 From 5f4d6214ef5e9b1ff6a72ddfa387c1d72adfac98 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 6 Dec 2012 23:10:40 +0100 Subject: NFC: nfcwilink: Use devm_kzalloc devm_kzalloc allocates memory that is released when a driver detaches. This patch uses devm_kzalloc for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall Signed-off-by: Samuel Ortiz --- drivers/nfc/nfcwilink.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c index 50b1ee41afc6..c7c182d2b7df 100644 --- a/drivers/nfc/nfcwilink.c +++ b/drivers/nfc/nfcwilink.c @@ -526,7 +526,7 @@ static int nfcwilink_probe(struct platform_device *pdev) nfc_dev_dbg(&pdev->dev, "probe entry"); - drv = kzalloc(sizeof(struct nfcwilink), GFP_KERNEL); + drv = devm_kzalloc(&pdev->dev, sizeof(struct nfcwilink), GFP_KERNEL); if (!drv) { rc = -ENOMEM; goto exit; @@ -547,7 +547,7 @@ static int nfcwilink_probe(struct platform_device *pdev) if (!drv->ndev) { nfc_dev_err(&pdev->dev, "nci_allocate_device failed"); rc = -ENOMEM; - goto free_exit; + goto exit; } nci_set_parent_dev(drv->ndev, &pdev->dev); @@ -566,9 +566,6 @@ static int nfcwilink_probe(struct platform_device *pdev) free_dev_exit: nci_free_device(drv->ndev); -free_exit: - kfree(drv); - exit: return rc; } @@ -588,8 +585,6 @@ static int nfcwilink_remove(struct platform_device *pdev) nci_unregister_device(ndev); nci_free_device(ndev); - kfree(drv); - dev_set_drvdata(&pdev->dev, NULL); return 0; -- cgit v1.2.3 From f0c9103813b3045bd5b43220b6a78c9908a45d24 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Mon, 26 Nov 2012 18:06:27 +0100 Subject: NFC: Fixed nfc core and hci unregistration and cleanup When an adapter is removed, it will unregister itself from hci and/or nfc core. In order to do that safely, work tasks must first be canceled and prevented to be scheduled again, before the hci or nfc device can be destroyed. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz --- include/net/nfc/hci.h | 2 ++ include/net/nfc/nfc.h | 2 ++ net/nfc/core.c | 47 ++++++++++++++++++++++------------------------- net/nfc/hci/core.c | 31 ++++++++++++++++++++++++------- net/nfc/hci/hcp.c | 7 +++++++ 5 files changed, 57 insertions(+), 32 deletions(-) diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 671953e11575..e6224571e5e6 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -87,6 +87,8 @@ struct nfc_hci_dev { u32 max_data_link_payload; + bool shutting_down; + struct mutex msg_tx_mutex; struct list_head msg_tx_queue; diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index fce80b2f9be7..1665674e86b2 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -115,6 +115,8 @@ struct nfc_dev { struct timer_list check_pres_timer; struct work_struct check_pres_work; + bool shutting_down; + struct nfc_ops *ops; }; #define to_nfc_dev(_dev) container_of(_dev, struct nfc_dev, dev) diff --git a/net/nfc/core.c b/net/nfc/core.c index aa64ea441676..7d7b4ee34015 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -338,7 +338,7 @@ int nfc_activate_target(struct nfc_dev *dev, u32 target_idx, u32 protocol) dev->active_target = target; dev->rf_mode = NFC_RF_INITIATOR; - if (dev->ops->check_presence) + if (dev->ops->check_presence && !dev->shutting_down) mod_timer(&dev->check_pres_timer, jiffies + msecs_to_jiffies(NFC_CHECK_PRES_FREQ_MS)); } @@ -429,7 +429,7 @@ int nfc_data_exchange(struct nfc_dev *dev, u32 target_idx, struct sk_buff *skb, rc = dev->ops->im_transceive(dev, dev->active_target, skb, cb, cb_context); - if (!rc && dev->ops->check_presence) + if (!rc && dev->ops->check_presence && !dev->shutting_down) mod_timer(&dev->check_pres_timer, jiffies + msecs_to_jiffies(NFC_CHECK_PRES_FREQ_MS)); } else if (dev->rf_mode == NFC_RF_TARGET && dev->ops->tm_send != NULL) { @@ -684,11 +684,6 @@ static void nfc_release(struct device *d) pr_debug("dev_name=%s\n", dev_name(&dev->dev)); - if (dev->ops->check_presence) { - del_timer_sync(&dev->check_pres_timer); - cancel_work_sync(&dev->check_pres_work); - } - nfc_genl_data_exit(&dev->genl_data); kfree(dev->targets); kfree(dev); @@ -706,15 +701,16 @@ static void nfc_check_pres_work(struct work_struct *work) rc = dev->ops->check_presence(dev, dev->active_target); if (rc == -EOPNOTSUPP) goto exit; - if (!rc) { - mod_timer(&dev->check_pres_timer, jiffies + - msecs_to_jiffies(NFC_CHECK_PRES_FREQ_MS)); - } else { + if (rc) { u32 active_target_idx = dev->active_target->idx; device_unlock(&dev->dev); nfc_target_lost(dev, active_target_idx); return; } + + if (!dev->shutting_down) + mod_timer(&dev->check_pres_timer, jiffies + + msecs_to_jiffies(NFC_CHECK_PRES_FREQ_MS)); } exit: @@ -853,26 +849,27 @@ void nfc_unregister_device(struct nfc_dev *dev) id = dev->idx; - mutex_lock(&nfc_devlist_mutex); - nfc_devlist_generation++; - - /* lock to avoid unregistering a device while an operation - is in progress */ - device_lock(&dev->dev); - device_del(&dev->dev); - device_unlock(&dev->dev); + if (dev->ops->check_presence) { + device_lock(&dev->dev); + dev->shutting_down = true; + device_unlock(&dev->dev); + del_timer_sync(&dev->check_pres_timer); + cancel_work_sync(&dev->check_pres_work); + } - mutex_unlock(&nfc_devlist_mutex); + rc = nfc_genl_device_removed(dev); + if (rc) + pr_debug("The userspace won't be notified that the device %s " + "was removed\n", dev_name(&dev->dev)); nfc_llcp_unregister_device(dev); - rc = nfc_genl_device_removed(dev); - if (rc) - pr_debug("The userspace won't be notified that the device %s was removed\n", - dev_name(&dev->dev)); + mutex_lock(&nfc_devlist_mutex); + nfc_devlist_generation++; + device_del(&dev->dev); + mutex_unlock(&nfc_devlist_mutex); ida_simple_remove(&nfc_index_ida, id); - } EXPORT_SYMBOL(nfc_unregister_device); diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index 7bea574d5934..b4b84268653d 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -57,6 +57,8 @@ static void nfc_hci_msg_tx_work(struct work_struct *work) int r = 0; mutex_lock(&hdev->msg_tx_mutex); + if (hdev->shutting_down) + goto exit; if (hdev->cmd_pending_msg) { if (timer_pending(&hdev->cmd_timer) == 0) { @@ -868,6 +870,28 @@ void nfc_hci_unregister_device(struct nfc_hci_dev *hdev) { struct hci_msg *msg, *n; + mutex_lock(&hdev->msg_tx_mutex); + + if (hdev->cmd_pending_msg) { + if (hdev->cmd_pending_msg->cb) + hdev->cmd_pending_msg->cb( + hdev->cmd_pending_msg->cb_context, + NULL, -ESHUTDOWN); + kfree(hdev->cmd_pending_msg); + hdev->cmd_pending_msg = NULL; + } + + hdev->shutting_down = true; + + mutex_unlock(&hdev->msg_tx_mutex); + + del_timer_sync(&hdev->cmd_timer); + cancel_work_sync(&hdev->msg_tx_work); + + cancel_work_sync(&hdev->msg_rx_work); + + nfc_unregister_device(hdev->ndev); + skb_queue_purge(&hdev->rx_hcp_frags); skb_queue_purge(&hdev->msg_rx_queue); @@ -876,13 +900,6 @@ void nfc_hci_unregister_device(struct nfc_hci_dev *hdev) skb_queue_purge(&msg->msg_frags); kfree(msg); } - - del_timer_sync(&hdev->cmd_timer); - - nfc_unregister_device(hdev->ndev); - - cancel_work_sync(&hdev->msg_tx_work); - cancel_work_sync(&hdev->msg_rx_work); } EXPORT_SYMBOL(nfc_hci_unregister_device); diff --git a/net/nfc/hci/hcp.c b/net/nfc/hci/hcp.c index bc308a7ca609..b6b4109f2343 100644 --- a/net/nfc/hci/hcp.c +++ b/net/nfc/hci/hcp.c @@ -105,6 +105,13 @@ int nfc_hci_hcp_message_tx(struct nfc_hci_dev *hdev, u8 pipe, } mutex_lock(&hdev->msg_tx_mutex); + + if (hdev->shutting_down) { + err = -ESHUTDOWN; + mutex_unlock(&hdev->msg_tx_mutex); + goto out_skb_err; + } + list_add_tail(&cmd->msg_l, &hdev->msg_tx_queue); mutex_unlock(&hdev->msg_tx_mutex); -- cgit v1.2.3 From 27c31191b3d7ff32c266a5dbea344b9aa96ebf14 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Wed, 28 Nov 2012 15:48:44 +0100 Subject: NFC: Added error handling in event_received hci ops There is no use to return an error if the caller doesn't get it. Signed-off-by: Samuel Ortiz --- drivers/nfc/pn544/pn544.c | 27 +++++++++++++-------------- include/net/nfc/hci.h | 4 ++-- net/nfc/hci/core.c | 8 +++++--- 3 files changed, 20 insertions(+), 19 deletions(-) diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index cc666de3b8e5..4af70f9c01aa 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -714,8 +714,8 @@ static int pn544_hci_check_presence(struct nfc_hci_dev *hdev, return 0; } -static void pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, - u8 event, struct sk_buff *skb) +static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, u8 event, + struct sk_buff *skb) { struct sk_buff *rgb_skb = NULL; int r = 0; @@ -724,25 +724,23 @@ static void pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, switch (event) { case PN544_HCI_EVT_ACTIVATED: if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) - nfc_hci_target_discovered(hdev, gate); + r = nfc_hci_target_discovered(hdev, gate); else if (gate == PN544_RF_READER_NFCIP1_TARGET_GATE) { r = nfc_hci_get_param(hdev, gate, PN544_DEP_ATR_REQ, - &rgb_skb); - + &rgb_skb); if (r < 0) goto exit; - nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, - NFC_COMM_PASSIVE, rgb_skb->data, - rgb_skb->len); + r = nfc_tm_activated(hdev->ndev, NFC_PROTO_NFC_DEP_MASK, + NFC_COMM_PASSIVE, rgb_skb->data, + rgb_skb->len); kfree_skb(rgb_skb); } - break; case PN544_HCI_EVT_DEACTIVATED: - nfc_hci_send_event(hdev, gate, - NFC_HCI_EVT_END_OPERATION, NULL, 0); + r = nfc_hci_send_event(hdev, gate, NFC_HCI_EVT_END_OPERATION, + NULL, 0); break; case PN544_HCI_EVT_RCV_DATA: if (skb->len < 2) { @@ -757,15 +755,16 @@ static void pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, } skb_pull(skb, 2); - nfc_tm_data_received(hdev->ndev, skb); - - return; + return nfc_tm_data_received(hdev->ndev, skb); default: + pr_err("Discarded unknown event %x to gate %x\n", event, gate); break; } exit: kfree_skb(skb); + + return r; } static struct nfc_hci_ops pn544_hci_ops = { diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index e6224571e5e6..834e36481aff 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -57,8 +57,8 @@ struct nfc_hci_ops { int (*tm_send)(struct nfc_hci_dev *hdev, struct sk_buff *skb); int (*check_presence)(struct nfc_hci_dev *hdev, struct nfc_target *target); - void (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event, - struct sk_buff *skb); + int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event, + struct sk_buff *skb); }; /* Pipes */ diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index b4b84268653d..f30f6fe815b4 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -323,16 +323,18 @@ void nfc_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event, break; default: if (hdev->ops->event_received) { - hdev->ops->event_received(hdev, gate, event, skb); - return; + r = hdev->ops->event_received(hdev, gate, event, skb); + goto exit_noskb; + } else { + r = -EINVAL; } - break; } exit: kfree_skb(skb); +exit_noskb: if (r) { /* TODO: There was an error dispatching the event, * how to propagate up to nfc core? -- cgit v1.2.3 From 40d06d3647ea872a7346be1f6859f18cd0fe08d3 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 4 Dec 2012 16:43:24 +0100 Subject: NFC: Changed event_received hci ops result semantic Some chips use a standard HCI event code, destined to a proprietary gate, with a different meaning. Therefore, the HCI driver must always have a chance to intercept the event before standard processing is attempted. The new semantic specifies that the result value "1" means that the driver doesn't especially handle the event. result <= 0 means it was handled. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz --- drivers/nfc/pn544/pn544.c | 16 +++++++++++----- net/nfc/hci/core.c | 14 ++++++++------ 2 files changed, 19 insertions(+), 11 deletions(-) diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index 4af70f9c01aa..9349c548e8dc 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -714,18 +714,23 @@ static int pn544_hci_check_presence(struct nfc_hci_dev *hdev, return 0; } +/* + * Returns: + * <= 0: driver handled the event, skb consumed + * 1: driver does not handle the event, please do standard processing + */ static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, u8 event, struct sk_buff *skb) { struct sk_buff *rgb_skb = NULL; - int r = 0; + int r; pr_debug("hci event %d", event); switch (event) { case PN544_HCI_EVT_ACTIVATED: - if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) + if (gate == PN544_RF_READER_NFCIP1_INITIATOR_GATE) { r = nfc_hci_target_discovered(hdev, gate); - else if (gate == PN544_RF_READER_NFCIP1_TARGET_GATE) { + } else if (gate == PN544_RF_READER_NFCIP1_TARGET_GATE) { r = nfc_hci_get_param(hdev, gate, PN544_DEP_ATR_REQ, &rgb_skb); if (r < 0) @@ -736,6 +741,8 @@ static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, u8 event, rgb_skb->len); kfree_skb(rgb_skb); + } else { + r = -EINVAL; } break; case PN544_HCI_EVT_DEACTIVATED: @@ -757,8 +764,7 @@ static int pn544_hci_event_received(struct nfc_hci_dev *hdev, u8 gate, u8 event, skb_pull(skb, 2); return nfc_tm_data_received(hdev->ndev, skb); default: - pr_err("Discarded unknown event %x to gate %x\n", event, gate); - break; + return 1; } exit: diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index f30f6fe815b4..0430f3086e41 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -297,6 +297,12 @@ void nfc_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event, goto exit; } + if (hdev->ops->event_received) { + r = hdev->ops->event_received(hdev, gate, event, skb); + if (r <= 0) + goto exit_noskb; + } + switch (event) { case NFC_HCI_EVT_TARGET_DISCOVERED: if (skb->len < 1) { /* no status data? */ @@ -322,12 +328,8 @@ void nfc_hci_event_received(struct nfc_hci_dev *hdev, u8 pipe, u8 event, r = nfc_hci_target_discovered(hdev, gate); break; default: - if (hdev->ops->event_received) { - r = hdev->ops->event_received(hdev, gate, event, skb); - goto exit_noskb; - } else { - r = -EINVAL; - } + pr_info("Discarded unknown event %x to gate %x\n", event, gate); + r = -EINVAL; break; } -- cgit v1.2.3 From 924d4a023ee6da2e40c78578829e68bcbabee2dd Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 4 Dec 2012 16:44:25 +0100 Subject: NFC: Fixed skb leak in tm_send() nfc and hci ops implementations Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz --- drivers/nfc/pn544/pn544.c | 10 ++++++++-- net/nfc/hci/core.c | 6 ++++-- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index 9349c548e8dc..cd8fb16f5416 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -675,11 +675,17 @@ static int pn544_hci_im_transceive(struct nfc_hci_dev *hdev, static int pn544_hci_tm_send(struct nfc_hci_dev *hdev, struct sk_buff *skb) { + int r; + /* Set default false for multiple information chaining */ *skb_push(skb, 1) = 0; - return nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, - PN544_HCI_EVT_SND_DATA, skb->data, skb->len); + r = nfc_hci_send_event(hdev, PN544_RF_READER_NFCIP1_TARGET_GATE, + PN544_HCI_EVT_SND_DATA, skb->data, skb->len); + + kfree_skb(skb); + + return r; } static int pn544_hci_check_presence(struct nfc_hci_dev *hdev, diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index 0430f3086e41..d9190da4a403 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -675,8 +675,10 @@ static int hci_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb) if (hdev->ops->tm_send) return hdev->ops->tm_send(hdev, skb); - else - return -ENOTSUPP; + + kfree_skb(skb); + + return -ENOTSUPP; } static int hci_check_presence(struct nfc_dev *nfc_dev, -- cgit v1.2.3 From bf71ab8ba53081c28b960d48e0c4cd1c17588aa6 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 18 Dec 2012 14:15:49 +0100 Subject: NFC: Add HCI quirks to support driver (non)standard implementations Some chips diverge from the HCI spec in their implementation of standard features. This adds a new quirks parameter to nfc_hci_allocate_device() to let the driver indicate its divergence. Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz --- drivers/nfc/pn544/pn544.c | 2 +- include/net/nfc/hci.h | 13 +++++++++++++ net/nfc/hci/command.c | 7 ++++++- net/nfc/hci/core.c | 3 +++ 4 files changed, 23 insertions(+), 2 deletions(-) diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index cd8fb16f5416..ece834239852 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -833,7 +833,7 @@ int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, NFC_PROTO_ISO14443_B_MASK | NFC_PROTO_NFC_DEP_MASK; - info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, + info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, 0, protocols, llc_name, phy_headroom + PN544_CMDS_HEADROOM, phy_tailroom, phy_payload); diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 834e36481aff..2ff71750c428 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -82,6 +82,16 @@ typedef int (*xmit) (struct sk_buff *skb, void *cb_data); #define NFC_HCI_MAX_GATES 256 +/* + * These values can be specified by a driver to indicate it requires some + * adaptation of the HCI standard. + * + * NFC_HCI_QUIRK_SHORT_CLEAR - send HCI_ADM_CLEAR_ALL_PIPE cmd with no params + */ +enum { + NFC_HCI_QUIRK_SHORT_CLEAR = 0, +}; + struct nfc_hci_dev { struct nfc_dev *ndev; @@ -131,11 +141,14 @@ struct nfc_hci_dev { u8 *gb; size_t gb_len; + + unsigned long quirks; }; /* hci device allocation */ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, struct nfc_hci_init_data *init_data, + unsigned long quirks, u32 protocols, const char *llc_name, int tx_headroom, diff --git a/net/nfc/hci/command.c b/net/nfc/hci/command.c index 7d99410e6c1a..64f922be9281 100644 --- a/net/nfc/hci/command.c +++ b/net/nfc/hci/command.c @@ -280,14 +280,19 @@ static int nfc_hci_delete_pipe(struct nfc_hci_dev *hdev, u8 pipe) static int nfc_hci_clear_all_pipes(struct nfc_hci_dev *hdev) { u8 param[2]; + size_t param_len = 2; /* TODO: Find out what the identity reference data is * and fill param with it. HCI spec 6.1.3.5 */ pr_debug("\n"); + if (test_bit(NFC_HCI_QUIRK_SHORT_CLEAR, &hdev->quirks)) + param_len = 0; + return nfc_hci_execute_cmd(hdev, NFC_HCI_ADMIN_PIPE, - NFC_HCI_ADM_CLEAR_ALL_PIPE, param, 2, NULL); + NFC_HCI_ADM_CLEAR_ALL_PIPE, param, param_len, + NULL); } int nfc_hci_disconnect_gate(struct nfc_hci_dev *hdev, u8 gate) diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index d9190da4a403..755a6b9774ab 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -795,6 +795,7 @@ static struct nfc_ops hci_nfc_ops = { struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, struct nfc_hci_init_data *init_data, + unsigned long quirks, u32 protocols, const char *llc_name, int tx_headroom, @@ -838,6 +839,8 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, memset(hdev->gate2pipe, NFC_HCI_INVALID_PIPE, sizeof(hdev->gate2pipe)); + hdev->quirks = quirks; + return hdev; } EXPORT_SYMBOL(nfc_hci_allocate_device); -- cgit v1.2.3 From aa74103071312fede1f4953fe3c027941add1256 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 18 Dec 2012 16:26:23 +0100 Subject: NFC: pn544: Separate the core code and the i2c one into different modules As we may need to support other physical layers, we can avoid linking the core part into each and every pn544 module. Signed-off-by: Samuel Ortiz --- drivers/nfc/Kconfig | 15 ++------------- drivers/nfc/Makefile | 2 +- drivers/nfc/pn544/Kconfig | 23 +++++++++++++++++++++++ drivers/nfc/pn544/Makefile | 5 +++-- drivers/nfc/pn544/pn544.c | 6 ++++++ 5 files changed, 35 insertions(+), 16 deletions(-) create mode 100644 drivers/nfc/pn544/Kconfig diff --git a/drivers/nfc/Kconfig b/drivers/nfc/Kconfig index ec857676c39f..80c728b28828 100644 --- a/drivers/nfc/Kconfig +++ b/drivers/nfc/Kconfig @@ -5,19 +5,6 @@ menu "Near Field Communication (NFC) devices" depends on NFC -config PN544_HCI_NFC - tristate "HCI PN544 NFC driver" - depends on I2C && NFC_HCI && NFC_SHDLC - select CRC_CCITT - default n - ---help--- - NXP PN544 i2c driver. - This is a driver based on the SHDLC and HCI NFC kernel layers and - will thus not work with NXP libnfc library. - - To compile this driver as a module, choose m here. The module will - be called pn544_hci. - config NFC_PN533 tristate "NXP PN533 USB driver" depends on USB @@ -39,4 +26,6 @@ config NFC_WILINK Say Y here to compile support for Texas Instrument's NFC WiLink driver into the kernel or say M to compile it as module. +source "drivers/nfc/pn544/Kconfig" + endmenu diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile index 36c359043f54..574bbc04d97a 100644 --- a/drivers/nfc/Makefile +++ b/drivers/nfc/Makefile @@ -2,7 +2,7 @@ # Makefile for nfc devices # -obj-$(CONFIG_PN544_HCI_NFC) += pn544/ +obj-$(CONFIG_NFC_PN544) += pn544/ obj-$(CONFIG_NFC_PN533) += pn533.o obj-$(CONFIG_NFC_WILINK) += nfcwilink.o diff --git a/drivers/nfc/pn544/Kconfig b/drivers/nfc/pn544/Kconfig new file mode 100644 index 000000000000..c277790ac71c --- /dev/null +++ b/drivers/nfc/pn544/Kconfig @@ -0,0 +1,23 @@ +config NFC_PN544 + tristate "NXP PN544 NFC driver" + depends on NFC_HCI + select CRC_CCITT + default n + ---help--- + NXP PN544 core driver. + This is a driver based on the HCI NFC kernel layers and + will thus not work with NXP libnfc library. + + To compile this driver as a module, choose m here. The module will + be called pn544. + Say N if unsure. + +config NFC_PN544_I2C + tristate "NFC PN544 i2c support" + depends on NFC_PN544 && I2C && NFC_SHDLC + ---help--- + This module adds support for the NXP pn544 i2c interface. + Select this if your platform is using the i2c bus. + + If you choose to build a module, it'll be called pn544_i2c. + Say N if unsure. \ No newline at end of file diff --git a/drivers/nfc/pn544/Makefile b/drivers/nfc/pn544/Makefile index 725733881eb3..ac076793687d 100644 --- a/drivers/nfc/pn544/Makefile +++ b/drivers/nfc/pn544/Makefile @@ -2,6 +2,7 @@ # Makefile for PN544 HCI based NFC driver # -obj-$(CONFIG_PN544_HCI_NFC) += pn544_i2c.o +pn544_i2c-objs = i2c.o -pn544_i2c-y := pn544.o i2c.o +obj-$(CONFIG_NFC_PN544) += pn544.o +obj-$(CONFIG_NFC_PN544_I2C) += pn544_i2c.o diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index ece834239852..d108c794008d 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -20,6 +20,7 @@ #include #include +#include #include #include @@ -862,6 +863,7 @@ err_alloc_hdev: err_info_alloc: return r; } +EXPORT_SYMBOL(pn544_hci_probe); void pn544_hci_remove(struct nfc_hci_dev *hdev) { @@ -871,3 +873,7 @@ void pn544_hci_remove(struct nfc_hci_dev *hdev) nfc_hci_free_device(hdev); kfree(info); } +EXPORT_SYMBOL(pn544_hci_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRIVER_DESC); -- cgit v1.2.3 From 234d4d6b1038f004f233f14906ec9328bf53088b Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 18 Dec 2012 16:40:16 +0100 Subject: NFC: pn544: Use module_i2c_driver The pn544 init routine does nothing but adding the driver to the i2c bus. Signed-off-by: Samuel Ortiz --- drivers/nfc/pn544/i2c.c | 24 +----------------------- 1 file changed, 1 insertion(+), 23 deletions(-) diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c index 7da9071b68b6..ec79f355edc1 100644 --- a/drivers/nfc/pn544/i2c.c +++ b/drivers/nfc/pn544/i2c.c @@ -472,29 +472,7 @@ static struct i2c_driver pn544_hci_i2c_driver = { .remove = __devexit_p(pn544_hci_i2c_remove), }; -static int __init pn544_hci_i2c_init(void) -{ - int r; - - pr_debug(DRIVER_DESC ": %s\n", __func__); - - r = i2c_add_driver(&pn544_hci_i2c_driver); - if (r) { - pr_err(PN544_HCI_I2C_DRIVER_NAME - ": driver registration failed\n"); - return r; - } - - return 0; -} - -static void __exit pn544_hci_i2c_exit(void) -{ - i2c_del_driver(&pn544_hci_i2c_driver); -} - -module_init(pn544_hci_i2c_init); -module_exit(pn544_hci_i2c_exit); +module_i2c_driver(pn544_hci_i2c_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION(DRIVER_DESC); -- cgit v1.2.3 From a0f36536ac2ec0f7a9cfb53c72d6d8c378815fdb Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Tue, 18 Dec 2012 18:07:37 +0100 Subject: NFC: pn544: Use devm_kzalloc API Signed-off-by: Samuel Ortiz --- drivers/nfc/pn544/i2c.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/drivers/nfc/pn544/i2c.c b/drivers/nfc/pn544/i2c.c index ec79f355edc1..7f96ca2c46bd 100644 --- a/drivers/nfc/pn544/i2c.c +++ b/drivers/nfc/pn544/i2c.c @@ -376,12 +376,12 @@ static int __devinit pn544_hci_i2c_probe(struct i2c_client *client, return -ENODEV; } - phy = kzalloc(sizeof(struct pn544_i2c_phy), GFP_KERNEL); + phy = devm_kzalloc(&client->dev, sizeof(struct pn544_i2c_phy), + GFP_KERNEL); if (!phy) { dev_err(&client->dev, "Cannot allocate memory for pn544 i2c phy.\n"); - r = -ENOMEM; - goto err_phy_alloc; + return -ENOMEM; } phy->i2c_dev = client; @@ -390,20 +390,18 @@ static int __devinit pn544_hci_i2c_probe(struct i2c_client *client, pdata = client->dev.platform_data; if (pdata == NULL) { dev_err(&client->dev, "No platform data\n"); - r = -EINVAL; - goto err_pdata; + return -EINVAL; } if (pdata->request_resources == NULL) { dev_err(&client->dev, "request_resources() missing\n"); - r = -EINVAL; - goto err_pdata; + return -EINVAL; } r = pdata->request_resources(client); if (r) { dev_err(&client->dev, "Cannot get platform resources\n"); - goto err_pdata; + return r; } phy->gpio_en = pdata->get_gpio(NFC_GPIO_ENABLE); @@ -435,10 +433,6 @@ err_rti: if (pdata->free_resources != NULL) pdata->free_resources(); -err_pdata: - kfree(phy); - -err_phy_alloc: return r; } @@ -458,8 +452,6 @@ static __devexit int pn544_hci_i2c_remove(struct i2c_client *client) if (pdata->free_resources) pdata->free_resources(); - kfree(phy); - return 0; } -- cgit v1.2.3 From 2ad554a502facd705ce6eb362d0f1ac3ca426508 Mon Sep 17 00:00:00 2001 From: Eric Lapuyade Date: Tue, 18 Dec 2012 17:35:02 +0100 Subject: NFC: update HCI documentation Signed-off-by: Eric Lapuyade Signed-off-by: Samuel Ortiz --- Documentation/nfc/nfc-hci.txt | 129 +++++++++++++++++++++++++++++++++--------- 1 file changed, 103 insertions(+), 26 deletions(-) diff --git a/Documentation/nfc/nfc-hci.txt b/Documentation/nfc/nfc-hci.txt index 89a339c9b079..0686c9e211c2 100644 --- a/Documentation/nfc/nfc-hci.txt +++ b/Documentation/nfc/nfc-hci.txt @@ -17,10 +17,12 @@ HCI HCI registers as an nfc device with NFC Core. Requests coming from userspace are routed through netlink sockets to NFC Core and then to HCI. From this point, they are translated in a sequence of HCI commands sent to the HCI layer in the -host controller (the chip). The sending context blocks while waiting for the -response to arrive. +host controller (the chip). Commands can be executed synchronously (the sending +context blocks waiting for response) or asynchronously (the response is returned +from HCI Rx context). HCI events can also be received from the host controller. They will be handled -and a translation will be forwarded to NFC Core as needed. +and a translation will be forwarded to NFC Core as needed. There are hooks to +let the HCI driver handle proprietary events or override standard behavior. HCI uses 2 execution contexts: - one for executing commands : nfc_hci_msg_tx_work(). Only one command can be executing at any given moment. @@ -33,6 +35,8 @@ The Session initialization is an HCI standard which must unfortunately support proprietary gates. This is the reason why the driver will pass a list of proprietary gates that must be part of the session. HCI will ensure all those gates have pipes connected when the hci device is set up. +In case the chip supports pre-opened gates and pseudo-static pipes, the driver +can pass that information to HCI core. HCI Gates and Pipes ------------------- @@ -46,6 +50,13 @@ without knowing the pipe connected to it. Driver interface ---------------- +A driver is generally written in two parts : the physical link management and +the HCI management. This makes it easier to maintain a driver for a chip that +can be connected using various phy (i2c, spi, ...) + +HCI Management +-------------- + A driver would normally register itself with HCI and provide the following entry points: @@ -53,58 +64,113 @@ struct nfc_hci_ops { int (*open)(struct nfc_hci_dev *hdev); void (*close)(struct nfc_hci_dev *hdev); int (*hci_ready) (struct nfc_hci_dev *hdev); - int (*xmit)(struct nfc_hci_dev *hdev, struct sk_buff *skb); - int (*start_poll)(struct nfc_hci_dev *hdev, u32 protocols); - int (*target_from_gate)(struct nfc_hci_dev *hdev, u8 gate, - struct nfc_target *target); + int (*xmit) (struct nfc_hci_dev *hdev, struct sk_buff *skb); + int (*start_poll) (struct nfc_hci_dev *hdev, + u32 im_protocols, u32 tm_protocols); + int (*dep_link_up)(struct nfc_hci_dev *hdev, struct nfc_target *target, + u8 comm_mode, u8 *gb, size_t gb_len); + int (*dep_link_down)(struct nfc_hci_dev *hdev); + int (*target_from_gate) (struct nfc_hci_dev *hdev, u8 gate, + struct nfc_target *target); int (*complete_target_discovered) (struct nfc_hci_dev *hdev, u8 gate, struct nfc_target *target); - int (*data_exchange) (struct nfc_hci_dev *hdev, - struct nfc_target *target, - struct sk_buff *skb, struct sk_buff **res_skb); + int (*im_transceive) (struct nfc_hci_dev *hdev, + struct nfc_target *target, struct sk_buff *skb, + data_exchange_cb_t cb, void *cb_context); + int (*tm_send)(struct nfc_hci_dev *hdev, struct sk_buff *skb); int (*check_presence)(struct nfc_hci_dev *hdev, struct nfc_target *target); + int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event, + struct sk_buff *skb); }; - open() and close() shall turn the hardware on and off. - hci_ready() is an optional entry point that is called right after the hci session has been set up. The driver can use it to do additional initialization that must be performed using HCI commands. -- xmit() shall simply write a frame to the chip. +- xmit() shall simply write a frame to the physical link. - start_poll() is an optional entrypoint that shall set the hardware in polling mode. This must be implemented only if the hardware uses proprietary gates or a mechanism slightly different from the HCI standard. +- dep_link_up() is called after a p2p target has been detected, to finish +the p2p connection setup with hardware parameters that need to be passed back +to nfc core. +- dep_link_down() is called to bring the p2p link down. - target_from_gate() is an optional entrypoint to return the nfc protocols corresponding to a proprietary gate. - complete_target_discovered() is an optional entry point to let the driver perform additional proprietary processing necessary to auto activate the discovered target. -- data_exchange() must be implemented by the driver if proprietary HCI commands +- im_transceive() must be implemented by the driver if proprietary HCI commands are required to send data to the tag. Some tag types will require custom commands, others can be written to using the standard HCI commands. The driver can check the tag type and either do proprietary processing, or return 1 to ask -for standard processing. +for standard processing. The data exchange command itself must be sent +asynchronously. +- tm_send() is called to send data in the case of a p2p connection - check_presence() is an optional entry point that will be called regularly by the core to check that an activated tag is still in the field. If this is not implemented, the core will not be able to push tag_lost events to the user space +- event_received() is called to handle an event coming from the chip. Driver +can handle the event or return 1 to let HCI attempt standard processing. On the rx path, the driver is responsible to push incoming HCP frames to HCI using nfc_hci_recv_frame(). HCI will take care of re-aggregation and handling This must be done from a context that can sleep. -SHDLC ------ +PHY Management +-------------- + +The physical link (i2c, ...) management is defined by the following struture: + +struct nfc_phy_ops { + int (*write)(void *dev_id, struct sk_buff *skb); + int (*enable)(void *dev_id); + void (*disable)(void *dev_id); +}; + +enable(): turn the phy on (power on), make it ready to transfer data +disable(): turn the phy off +write(): Send a data frame to the chip. Note that to enable higher +layers such as an llc to store the frame for re-emission, this function must +not alter the skb. It must also not return a positive result (return 0 for +success, negative for failure). + +Data coming from the chip shall be sent directly to nfc_hci_recv_frame(). + +LLC +--- + +Communication between the CPU and the chip often requires some link layer +protocol. Those are isolated as modules managed by the HCI layer. There are +currently two modules : nop (raw transfert) and shdlc. +A new llc must implement the following functions: + +struct nfc_llc_ops { + void *(*init) (struct nfc_hci_dev *hdev, xmit_to_drv_t xmit_to_drv, + rcv_to_hci_t rcv_to_hci, int tx_headroom, + int tx_tailroom, int *rx_headroom, int *rx_tailroom, + llc_failure_t llc_failure); + void (*deinit) (struct nfc_llc *llc); + int (*start) (struct nfc_llc *llc); + int (*stop) (struct nfc_llc *llc); + void (*rcv_from_drv) (struct nfc_llc *llc, struct sk_buff *skb); + int (*xmit_from_hci) (struct nfc_llc *llc, struct sk_buff *skb); +}; + +- init() : allocate and init your private storage +- deinit() : cleanup +- start() : establish the logical connection +- stop () : terminate the logical connection +- rcv_from_drv() : handle data coming from the chip, going to HCI +- xmit_from_hci() : handle data sent by HCI, going to the chip -Most chips use shdlc to ensure integrity and delivery ordering of the HCP -frames between the host controller (the chip) and hosts (entities connected -to the chip, like the cpu). In order to simplify writing the driver, an shdlc -layer is available for use by the driver. -When used, the driver actually registers with shdlc, and shdlc will register -with HCI. HCI sees shdlc as the driver and thus send its HCP frames -through shdlc->xmit. -SHDLC adds a new execution context (nfc_shdlc_sm_work()) to run its state -machine and handle both its rx and tx path. +The llc must be registered with nfc before it can be used. Do that by +calling nfc_llc_register(const char *name, struct nfc_llc_ops *ops); + +Again, note that the llc does not handle the physical link. It is thus very +easy to mix any physical link with any llc for a given chip driver. Included Drivers ---------------- @@ -117,10 +183,12 @@ Execution Contexts The execution contexts are the following: - IRQ handler (IRQH): -fast, cannot sleep. stores incoming frames into an shdlc rx queue +fast, cannot sleep. sends incoming frames to HCI where they are passed to +the current llc. In case of shdlc, the frame is queued in shdlc rx queue. - SHDLC State Machine worker (SMW) -handles shdlc rx & tx queues. Dispatches HCI cmd responses. +Only when llc_shdlc is used: handles shdlc rx & tx queues. +Dispatches HCI cmd responses. - HCI Tx Cmd worker (MSGTXWQ) Serializes execution of HCI commands. Completes execution in case of response @@ -166,6 +234,15 @@ waiting command execution. Response processing involves invoking the completion callback that was provided by nfc_hci_msg_tx_work() when it sent the command. The completion callback will then wake the syscall context. +It is also possible to execute the command asynchronously using this API: + +static int nfc_hci_execute_cmd_async(struct nfc_hci_dev *hdev, u8 pipe, u8 cmd, + const u8 *param, size_t param_len, + data_exchange_cb_t cb, void *cb_context) + +The workflow is the same, except that the API call returns immediately, and +the callback will be called with the result from the SMW context. + Workflow receiving an HCI event or command ------------------------------------------ -- cgit v1.2.3 From 390a1bd8538132186ddb679cafe9e75b7ef7e2d2 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Wed, 19 Dec 2012 19:11:32 +0100 Subject: NFC: Initial Secure Element API Each NFC adapter can have several links to different secure elements and that property needs to be exported by the drivers. A secure element link can be enabled and disabled, and card emulation will be handled by the currently active one. Otherwise card emulation will be host implemented. Signed-off-by: Samuel Ortiz --- drivers/nfc/nfcwilink.c | 1 + drivers/nfc/pn533.c | 1 + drivers/nfc/pn544/pn544.c | 6 ++++-- include/net/nfc/hci.h | 3 +++ include/net/nfc/nci_core.h | 1 + include/net/nfc/nfc.h | 6 ++++++ include/uapi/linux/nfc.h | 14 ++++++++++++++ net/nfc/core.c | 3 +++ net/nfc/hci/core.c | 3 ++- net/nfc/nci/core.c | 2 ++ net/nfc/netlink.c | 1 + 11 files changed, 38 insertions(+), 3 deletions(-) diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c index c7c182d2b7df..3b731acbc408 100644 --- a/drivers/nfc/nfcwilink.c +++ b/drivers/nfc/nfcwilink.c @@ -542,6 +542,7 @@ static int nfcwilink_probe(struct platform_device *pdev) drv->ndev = nci_allocate_device(&nfcwilink_ops, protocols, + NFC_SE_NONE, NFCWILINK_HDR_LEN, 0); if (!drv->ndev) { diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index e8c083203b33..31a5b3b53b2a 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -2525,6 +2525,7 @@ static int pn533_probe(struct usb_interface *interface, dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols, + NFC_SE_NONE, dev->ops->tx_header_len + PN533_CMD_DATAEXCH_HEAD_LEN, dev->ops->tx_tail_len); diff --git a/drivers/nfc/pn544/pn544.c b/drivers/nfc/pn544/pn544.c index d108c794008d..9c5f16e7baef 100644 --- a/drivers/nfc/pn544/pn544.c +++ b/drivers/nfc/pn544/pn544.c @@ -801,7 +801,7 @@ int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, struct nfc_hci_dev **hdev) { struct pn544_hci_info *info; - u32 protocols; + u32 protocols, se; struct nfc_hci_init_data init_data; int r; @@ -834,8 +834,10 @@ int pn544_hci_probe(void *phy_id, struct nfc_phy_ops *phy_ops, char *llc_name, NFC_PROTO_ISO14443_B_MASK | NFC_PROTO_NFC_DEP_MASK; + se = NFC_SE_UICC | NFC_SE_EMBEDDED; + info->hdev = nfc_hci_allocate_device(&pn544_hci_ops, &init_data, 0, - protocols, llc_name, + protocols, se, llc_name, phy_headroom + PN544_CMDS_HEADROOM, phy_tailroom, phy_payload); if (!info->hdev) { diff --git a/include/net/nfc/hci.h b/include/net/nfc/hci.h index 2ff71750c428..b87a1692b086 100644 --- a/include/net/nfc/hci.h +++ b/include/net/nfc/hci.h @@ -59,6 +59,8 @@ struct nfc_hci_ops { struct nfc_target *target); int (*event_received)(struct nfc_hci_dev *hdev, u8 gate, u8 event, struct sk_buff *skb); + int (*enable_se)(struct nfc_dev *dev, u32 secure_element); + int (*disable_se)(struct nfc_dev *dev, u32 secure_element); }; /* Pipes */ @@ -150,6 +152,7 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, struct nfc_hci_init_data *init_data, unsigned long quirks, u32 protocols, + u32 supported_se, const char *llc_name, int tx_headroom, int tx_tailroom, diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h index d705d8674949..5bc0c460edc0 100644 --- a/include/net/nfc/nci_core.h +++ b/include/net/nfc/nci_core.h @@ -147,6 +147,7 @@ struct nci_dev { /* ----- NCI Devices ----- */ struct nci_dev *nci_allocate_device(struct nci_ops *ops, __u32 supported_protocols, + __u32 supported_se, int tx_headroom, int tx_tailroom); void nci_free_device(struct nci_dev *ndev); diff --git a/include/net/nfc/nfc.h b/include/net/nfc/nfc.h index 1665674e86b2..87a6417fc934 100644 --- a/include/net/nfc/nfc.h +++ b/include/net/nfc/nfc.h @@ -68,6 +68,8 @@ struct nfc_ops { void *cb_context); int (*tm_send)(struct nfc_dev *dev, struct sk_buff *skb); int (*check_presence)(struct nfc_dev *dev, struct nfc_target *target); + int (*enable_se)(struct nfc_dev *dev, u32 secure_element); + int (*disable_se)(struct nfc_dev *dev, u32 secure_element); }; #define NFC_TARGET_IDX_ANY -1 @@ -109,6 +111,9 @@ struct nfc_dev { struct nfc_genl_data genl_data; u32 supported_protocols; + u32 supported_se; + u32 active_se; + int tx_headroom; int tx_tailroom; @@ -125,6 +130,7 @@ extern struct class nfc_class; struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops, u32 supported_protocols, + u32 supported_se, int tx_headroom, int tx_tailroom); diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 0e63cee8d810..80e4ecd8c04c 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -67,6 +67,11 @@ * subsequent CONNECT and CC messages. * If one of the passed parameters is wrong none is set and -EINVAL is * returned. + * @NFC_CMD_ENABLE_SE: Enable the physical link to a specific secure element. + * Once enabled a secure element will handle card emulation mode, i.e. + * starting a poll from a device which has a secure element enabled means + * we want to do SE based card emulation. + * @NFC_CMD_DISABLE_SE: Disable the physical link to a specific secure element. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -86,6 +91,8 @@ enum nfc_commands { NFC_EVENT_TM_DEACTIVATED, NFC_CMD_LLC_GET_PARAMS, NFC_CMD_LLC_SET_PARAMS, + NFC_CMD_ENABLE_SE, + NFC_CMD_DISABLE_SE, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -114,6 +121,7 @@ enum nfc_commands { * @NFC_ATTR_LLC_PARAM_LTO: Link TimeOut parameter * @NFC_ATTR_LLC_PARAM_RW: Receive Window size parameter * @NFC_ATTR_LLC_PARAM_MIUX: MIU eXtension parameter + * @NFC_ATTR_SE: Available Secure Elements */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -134,6 +142,7 @@ enum nfc_attrs { NFC_ATTR_LLC_PARAM_LTO, NFC_ATTR_LLC_PARAM_RW, NFC_ATTR_LLC_PARAM_MIUX, + NFC_ATTR_SE, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; @@ -172,6 +181,11 @@ enum nfc_attrs { #define NFC_PROTO_NFC_DEP_MASK (1 << NFC_PROTO_NFC_DEP) #define NFC_PROTO_ISO14443_B_MASK (1 << NFC_PROTO_ISO14443_B) +/* NFC Secure Elements */ +#define NFC_SE_NONE 0x0 +#define NFC_SE_UICC 0x1 +#define NFC_SE_EMBEDDED 0x2 + struct sockaddr_nfc { sa_family_t sa_family; __u32 dev_idx; diff --git a/net/nfc/core.c b/net/nfc/core.c index 7d7b4ee34015..25522e56d350 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -757,6 +757,7 @@ struct nfc_dev *nfc_get_device(unsigned int idx) */ struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops, u32 supported_protocols, + u32 supported_se, int tx_headroom, int tx_tailroom) { struct nfc_dev *dev; @@ -774,6 +775,8 @@ struct nfc_dev *nfc_allocate_device(struct nfc_ops *ops, dev->ops = ops; dev->supported_protocols = supported_protocols; + dev->supported_se = supported_se; + dev->active_se = NFC_SE_NONE; dev->tx_headroom = tx_headroom; dev->tx_tailroom = tx_tailroom; diff --git a/net/nfc/hci/core.c b/net/nfc/hci/core.c index 755a6b9774ab..91020b210d87 100644 --- a/net/nfc/hci/core.c +++ b/net/nfc/hci/core.c @@ -797,6 +797,7 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, struct nfc_hci_init_data *init_data, unsigned long quirks, u32 protocols, + u32 supported_se, const char *llc_name, int tx_headroom, int tx_tailroom, @@ -822,7 +823,7 @@ struct nfc_hci_dev *nfc_hci_allocate_device(struct nfc_hci_ops *ops, return NULL; } - hdev->ndev = nfc_allocate_device(&hci_nfc_ops, protocols, + hdev->ndev = nfc_allocate_device(&hci_nfc_ops, protocols, supported_se, tx_headroom + HCI_CMDS_HEADROOM, tx_tailroom); if (!hdev->ndev) { diff --git a/net/nfc/nci/core.c b/net/nfc/nci/core.c index 5f98dc1bf039..48ada0ec749e 100644 --- a/net/nfc/nci/core.c +++ b/net/nfc/nci/core.c @@ -658,6 +658,7 @@ static struct nfc_ops nci_nfc_ops = { */ struct nci_dev *nci_allocate_device(struct nci_ops *ops, __u32 supported_protocols, + __u32 supported_se, int tx_headroom, int tx_tailroom) { struct nci_dev *ndev; @@ -680,6 +681,7 @@ struct nci_dev *nci_allocate_device(struct nci_ops *ops, ndev->nfc_dev = nfc_allocate_device(&nci_nfc_ops, supported_protocols, + supported_se, tx_headroom + NCI_DATA_HDR_SIZE, tx_tailroom); if (!ndev->nfc_dev) diff --git a/net/nfc/netlink.c b/net/nfc/netlink.c index 3568ae16786d..504b883439f1 100644 --- a/net/nfc/netlink.c +++ b/net/nfc/netlink.c @@ -366,6 +366,7 @@ static int nfc_genl_send_device(struct sk_buff *msg, struct nfc_dev *dev, if (nla_put_string(msg, NFC_ATTR_DEVICE_NAME, nfc_device_name(dev)) || nla_put_u32(msg, NFC_ATTR_DEVICE_INDEX, dev->idx) || nla_put_u32(msg, NFC_ATTR_PROTOCOLS, dev->supported_protocols) || + nla_put_u32(msg, NFC_ATTR_SE, dev->supported_se) || nla_put_u8(msg, NFC_ATTR_DEVICE_POWERED, dev->dev_up) || nla_put_u8(msg, NFC_ATTR_RF_MODE, dev->rf_mode)) goto nla_put_failure; -- cgit v1.2.3 From 8a0ecfe74b3692258311d084d31613516828905f Mon Sep 17 00:00:00 2001 From: Waldemar Rymarkiewicz Date: Fri, 21 Dec 2012 10:39:01 +0100 Subject: NFC: pn533: Fix missing parenthesis This is a quite critical patch as it fixes potential reference to undefined general_bytes which were never set correctly on target activation due to missing parenthesis. Signed-off-by: Waldemar Rymarkiewicz Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index 31a5b3b53b2a..f1702f945701 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -1724,9 +1724,10 @@ static int pn533_activate_target_nfcdep(struct pn533 *dev) rsp = (struct pn533_cmd_activate_response *)resp->data; rc = rsp->status & PN533_CMD_RET_MASK; - if (rc != PN533_CMD_RET_SUCCESS) + if (rc != PN533_CMD_RET_SUCCESS) { dev_kfree_skb(resp); return -EIO; + } /* ATR_RES general bytes are located at offset 16 */ gt_len = resp->len - 16; -- cgit v1.2.3 From 1353a10c474d1c6895051d33eefeb93542015008 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Thu, 10 Jan 2013 01:25:04 +0100 Subject: NFC: Update pn544 documentation The pn544 driver no longer has a /dev/pn544 interface nor a sysfs one. Reported-by: Marcel Holtmann Signed-off-by: Samuel Ortiz --- Documentation/nfc/nfc-pn544.txt | 84 +---------------------------------------- 1 file changed, 1 insertion(+), 83 deletions(-) diff --git a/Documentation/nfc/nfc-pn544.txt b/Documentation/nfc/nfc-pn544.txt index 2fcac9f5996e..b36ca14ca2d6 100644 --- a/Documentation/nfc/nfc-pn544.txt +++ b/Documentation/nfc/nfc-pn544.txt @@ -1,32 +1,15 @@ Kernel driver for the NXP Semiconductors PN544 Near Field Communication chip -Author: Jari Vanhala -Contact: Matti Aaltonen (matti.j.aaltonen at nokia.com) - General ------- The PN544 is an integrated transmission module for contactless communication. The driver goes under drives/nfc/ and is compiled as a -module named "pn544". It registers a misc device and creates a device -file named "/dev/pn544". +module named "pn544". Host Interfaces: I2C, SPI and HSU, this driver supports currently only I2C. -The Interface -------------- - -The driver offers a sysfs interface for a hardware test and an IOCTL -interface for selecting between two operating modes. There are read, -write and poll functions for transferring messages. The two operating -modes are the normal (HCI) mode and the firmware update mode. - -PN544 is controlled by sending messages from the userspace to the -chip. The main function of the driver is just to pass those messages -without caring about the message content. - - Protocols --------- @@ -47,68 +30,3 @@ and third (LSB) bytes of the message. The maximum FW message length is For the ETSI HCI specification see http://www.etsi.org/WebSite/Technologies/ProtocolSpecification.aspx - -The Hardware Test ------------------ - -The idea of the test is that it can performed by reading from the -corresponding sysfs file. The test is implemented in the board file -and it should test that PN544 can be put into the firmware update -mode. If the test is not implemented the sysfs file does not get -created. - -Example: -> cat /sys/module/pn544/drivers/i2c\:pn544/3-002b/nfc_test -1 - -Normal Operation ----------------- - -PN544 is powered up when the device file is opened, otherwise it's -turned off. Only one instance can use the device at a time. - -Userspace applications control PN544 with HCI messages. The hardware -sends an interrupt when data is available for reading. Data is -physically read when the read function is called by a userspace -application. Poll() checks the read interrupt state. Configuration and -self testing are also done from the userspace using read and write. - -Example platform data: - -static int rx71_pn544_nfc_request_resources(struct i2c_client *client) -{ - /* Get and setup the HW resources for the device */ -} - -static void rx71_pn544_nfc_free_resources(void) -{ - /* Release the HW resources */ -} - -static void rx71_pn544_nfc_enable(int fw) -{ - /* Turn the device on */ -} - -static int rx71_pn544_nfc_test(void) -{ - /* - * Put the device into the FW update mode - * and then back to the normal mode. - * Check the behavior and return one on success, - * zero on failure. - */ -} - -static void rx71_pn544_nfc_disable(void) -{ - /* turn the power off */ -} - -static struct pn544_nfc_platform_data rx71_nfc_data = { - .request_resources = rx71_pn544_nfc_request_resources, - .free_resources = rx71_pn544_nfc_free_resources, - .enable = rx71_pn544_nfc_enable, - .test = rx71_pn544_nfc_test, - .disable = rx71_pn544_nfc_disable, -}; -- cgit v1.2.3 From f4d6f7dce71a5da93da50272ff1670bf2f1146b1 Mon Sep 17 00:00:00 2001 From: Sergio Cambra Date: Thu, 10 Jan 2013 01:06:55 +0100 Subject: Bluetooth device 04ca:3008 should use ath3k Output of /sys/kernel/debug/usb/devices T: Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04ca ProdID=3008 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Sergio Cambra Signed-off-by: Gustavo Padovan --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index be178949bc8b..33c9a44a9678 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -78,6 +78,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x04CA, 0x3006) }, + { USB_DEVICE(0x04CA, 0x3008) }, { USB_DEVICE(0x13d3, 0x3362) }, { USB_DEVICE(0x0CF3, 0xE004) }, { USB_DEVICE(0x0930, 0x0219) }, @@ -109,6 +110,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3f6a993539e8..7e351e345476 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -136,6 +136,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 }, -- cgit v1.2.3 From 7b064edae38d62d8587a8c574f93b53ce75ae749 Mon Sep 17 00:00:00 2001 From: Jaganath Kanakkassery Date: Thu, 10 Jan 2013 10:28:35 +0530 Subject: Bluetooth: Fix authentication if acl data comes before remote feature evt If remote device sends l2cap info request before read_remote_ext_feature completes then mgmt_connected will be sent in hci_acldata_packet() and remote name request wont be sent and eventually authentication wont happen Hcidump log of the issue < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr BC:85:1F:74:7F:29 ptype 0xcc18 rswitch 0x01 clkoffset 0x4bf7 (valid) Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr BC:85:1F:74:7F:29 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 2 < ACL data: handle 12 flags 0x00 dlen 16 L2CAP(s): Info rsp: type 2 result 0 Extended feature mask 0x00b8 Enhanced Retransmission mode Streaming mode FCS Option Fixed Channels > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > ACL data: handle 12 flags 0x02 dlen 10 L2CAP(s): Info req: type 3 < ACL data: handle 12 flags 0x00 dlen 20 L2CAP(s): Info rsp: type 3 result 0 Fixed channel list 0x00000002 L2CAP Signalling Channel > HCI Event: Number of Completed Packets (0x13) plen 5 handle 12 packets 2 This patch moves sending mgmt_connected from hci_acldata_packet() to l2cap_connect_req() since this code is to handle the scenario remote device sends l2cap connect req too fast Signed-off-by: Jaganath Kanakkassery Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_core.c | 8 -------- net/bluetooth/l2cap_core.c | 11 +++++++++++ 2 files changed, 11 insertions(+), 8 deletions(-) diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 596660d37c5e..0f78e34220c9 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -2810,14 +2810,6 @@ static void hci_acldata_packet(struct hci_dev *hdev, struct sk_buff *skb) if (conn) { hci_conn_enter_active_mode(conn, BT_POWER_FORCE_ACTIVE_OFF); - hci_dev_lock(hdev); - if (test_bit(HCI_MGMT, &hdev->dev_flags) && - !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) - mgmt_device_connected(hdev, &conn->dst, conn->type, - conn->dst_type, 0, NULL, 0, - conn->dev_class); - hci_dev_unlock(hdev); - /* Send to upper protocol */ l2cap_recv_acldata(conn, skb, flags); return; diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 2c78208d793e..22e658322845 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -3727,6 +3727,17 @@ sendresp: static int l2cap_connect_req(struct l2cap_conn *conn, struct l2cap_cmd_hdr *cmd, u8 *data) { + struct hci_dev *hdev = conn->hcon->hdev; + struct hci_conn *hcon = conn->hcon; + + hci_dev_lock(hdev); + if (test_bit(HCI_MGMT, &hdev->dev_flags) && + !test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &hcon->flags)) + mgmt_device_connected(hdev, &hcon->dst, hcon->type, + hcon->dst_type, 0, NULL, 0, + hcon->dev_class); + hci_dev_unlock(hdev); + l2cap_connect(conn, cmd, data, L2CAP_CONN_RSP, 0); return 0; } -- cgit v1.2.3 From b7e98b5100aad9290d7f06fcb9d1e80f7f62f05f Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Thu, 3 Jan 2013 19:59:28 -0200 Subject: Bluetooth: Check if the hci connection exists in SCO shutdown Checking only for sco_conn seems to not be enough and lead to NULL dereferences in the code, check for hcon instead. <1>[11340.226404] BUG: unable to handle kernel NULL pointer dereference at 0000000 8 <4>[11340.226619] EIP is at __sco_sock_close+0xe8/0x1a0 <4>[11340.226629] EAX: f063a740 EBX: 00000000 ECX: f58f4544 EDX: 00000000 <4>[11340.226640] ESI: dec83e00 EDI: 5f9a081f EBP: e0fdff38 ESP: e0fdff1c <0>[11340.226674] Stack: <4>[11340.226682] c184db87 c1251028 dec83e00 e0fdff38 c1754aef dec83e00 00000000 e0fdff5c <4>[11340.226718] c184f587 e0fdff64 e0fdff68 5f9a081f e0fdff5c c1751852 d7813800 62262f10 <4>[11340.226752] e0fdff70 c1753c00 00000000 00000001 0000000d e0fdffac c175425c 00000041 <0>[11340.226793] Call Trace: <4>[11340.226813] [] ? sco_sock_clear_timer+0x27/0x60 <4>[11340.226831] [] ? local_bh_enable+0x68/0xd0 <4>[11340.226846] [] ? lock_sock_nested+0x4f/0x60 <4>[11340.226862] [] sco_sock_shutdown+0x67/0xb0 <4>[11340.226879] [] ? sockfd_lookup_light+0x22/0x80 <4>[11340.226897] [] sys_shutdown+0x30/0x60 <4>[11340.226912] [] sys_socketcall+0x1dc/0x2a0 <4>[11340.226929] [] ? trace_hardirqs_on_thunk+0xc/0x10 <4>[11340.226944] [] syscall_call+0x7/0xb <4>[11340.226960] [] ? restore_cur+0x5e/0xd7 <0>[11340.226969] Code: ff 4b 08 0f 94 c0 84 c0 74 20 80 7b 19 01 74 2f b8 0a 00 00 Reported-by: Chuansheng Liu Signed-off-by: Gustavo Padovan --- net/bluetooth/sco.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c index 531a93d613d4..57f250c20e39 100644 --- a/net/bluetooth/sco.c +++ b/net/bluetooth/sco.c @@ -352,7 +352,7 @@ static void __sco_sock_close(struct sock *sk) case BT_CONNECTED: case BT_CONFIG: - if (sco_pi(sk)->conn) { + if (sco_pi(sk)->conn->hcon) { sk->sk_state = BT_DISCONN; sco_sock_set_timer(sk, SCO_DISCONN_TIMEOUT); hci_conn_put(sco_pi(sk)->conn->hcon); -- cgit v1.2.3 From 75e6934a9e996ee7cfe7a488b7f7cc2baa86717a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 11 Jan 2013 12:32:37 +0100 Subject: mac80211: fix HT40 connections My commit 4bf88530be971bf95a7830ca61b4120980bf4347 ("mac80211: convert to channel definition struct") accidentally broke HT40 connections due to swapped channel flag checks -- fix that. Reported-by: Sujith Manoharan Tested-by: Sujith Manoharan Signed-off-by: Johannes Berg --- net/mac80211/mlme.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d90c07b1795f..e930175771ff 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -199,11 +199,11 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, case NL80211_CHAN_WIDTH_40: if (sdata->vif.bss_conf.chandef.chan->center_freq > sdata->vif.bss_conf.chandef.center_freq1 && - chan->flags & IEEE80211_CHAN_NO_HT40PLUS) + chan->flags & IEEE80211_CHAN_NO_HT40MINUS) disable_40 = true; if (sdata->vif.bss_conf.chandef.chan->center_freq < sdata->vif.bss_conf.chandef.center_freq1 && - chan->flags & IEEE80211_CHAN_NO_HT40MINUS) + chan->flags & IEEE80211_CHAN_NO_HT40PLUS) disable_40 = true; break; default: -- cgit v1.2.3 From 55b183ad8635589ea731a31653de79a2626491c4 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 11 Jan 2013 14:22:58 +0100 Subject: wireless: fix regulatory HT40 allowed check commit 1a9193185f462a51815fe48491f8a6fb6b942551 "regulatory: code cleanup" changed is_ht40_allowed without considering that IEEE80211_CHAN_NO_HT40 is not just one flag, but two. This is causing HT40- to be blocked completely. Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/wireless/reg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 8c114e8a9135..6ea626b30a2a 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -1123,7 +1123,9 @@ static bool is_ht40_allowed(struct ieee80211_channel *chan) if (chan->flags & IEEE80211_CHAN_DISABLED) return false; /* This would happen when regulatory rules disallow HT40 completely */ - return !(chan->flags & IEEE80211_CHAN_NO_HT40); + if ((chan->flags & IEEE80211_CHAN_NO_HT40) == IEEE80211_CHAN_NO_HT40) + return false; + return true; } static void reg_process_ht_flags_channel(struct wiphy *wiphy, -- cgit v1.2.3 From fad2e371bb5a9f64dced90309fa7cb8bce09e92f Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 11 Jan 2013 14:48:48 +0100 Subject: NFC: Avoid memcpy on LLCP connection less Rx path We can cast msg_name to a sockaddr_nfc_llcp pointer directly. Signed-off-by: Samuel Ortiz --- net/nfc/llcp/sock.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index 12ec4879b4ba..463231bed8d4 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -682,17 +682,17 @@ static int llcp_sock_recvmsg(struct kiocb *iocb, struct socket *sock, if (sk->sk_type == SOCK_DGRAM && msg->msg_name) { struct nfc_llcp_ui_cb *ui_cb = nfc_llcp_ui_skb_cb(skb); - struct sockaddr_nfc_llcp sockaddr; + struct sockaddr_nfc_llcp *sockaddr = + (struct sockaddr_nfc_llcp *) msg->msg_name; - pr_debug("Datagram socket %d %d\n", ui_cb->dsap, ui_cb->ssap); + msg->msg_namelen = sizeof(struct sockaddr_nfc_llcp); - sockaddr.sa_family = AF_NFC; - sockaddr.nfc_protocol = NFC_PROTO_NFC_DEP; - sockaddr.dsap = ui_cb->dsap; - sockaddr.ssap = ui_cb->ssap; + pr_debug("Datagram socket %d %d\n", ui_cb->dsap, ui_cb->ssap); - memcpy(msg->msg_name, &sockaddr, sizeof(sockaddr)); - msg->msg_namelen = sizeof(sockaddr); + sockaddr->sa_family = AF_NFC; + sockaddr->nfc_protocol = NFC_PROTO_NFC_DEP; + sockaddr->dsap = ui_cb->dsap; + sockaddr->ssap = ui_cb->ssap; } /* Mark read part of skb as used */ -- cgit v1.2.3 From fb97c3e80f99988079df4fb5f3c84aea4e7f806a Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 11 Jan 2013 14:54:22 +0100 Subject: NFC: Use skb_copy_datagram_iovec Safer and more robust than than memcpy_toiovec. Signed-off-by: Samuel Ortiz --- net/nfc/llcp/sock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c index 463231bed8d4..5332751943a9 100644 --- a/net/nfc/llcp/sock.c +++ b/net/nfc/llcp/sock.c @@ -672,7 +672,7 @@ static int llcp_sock_recvmsg(struct kiocb *iocb, struct socket *sock, copied = min_t(unsigned int, rlen, len); cskb = skb; - if (memcpy_toiovec(msg->msg_iov, cskb->data, copied)) { + if (skb_copy_datagram_iovec(cskb, 0, msg->msg_iov, copied)) { if (!(flags & MSG_PEEK)) skb_queue_head(&sk->sk_receive_queue, skb); return -EFAULT; -- cgit v1.2.3 From d7b9c5204e9c6810a20d509ee47bc70419096e59 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 8 Jan 2013 17:53:10 -0800 Subject: mwifiex: update config_bands during infra association Currently "adapter->config_bands" is updated during infra association only if channel is provided by user in "iw connect" command. config_bands is used while preparing association request to calculate supported rates by intersecting our rates with the rates advertised by AP. There is corner case in which we include zero rates in supported rates TLV based on previous IBSS network history, which leads to association failure. This patch fixes the problem by correctly updating config_bands. Cc: "3.7.y" Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 15 +-------------- drivers/net/wireless/mwifiex/sta_ioctl.c | 14 ++++++++++++++ 2 files changed, 15 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index efe525be27dd..e74e1b99419a 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1459,7 +1459,7 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, struct cfg80211_ssid req_ssid; int ret, auth_type = 0; struct cfg80211_bss *bss = NULL; - u8 is_scanning_required = 0, config_bands = 0; + u8 is_scanning_required = 0; memset(&req_ssid, 0, sizeof(struct cfg80211_ssid)); @@ -1478,19 +1478,6 @@ mwifiex_cfg80211_assoc(struct mwifiex_private *priv, size_t ssid_len, u8 *ssid, /* disconnect before try to associate */ mwifiex_deauthenticate(priv, NULL); - if (channel) { - if (mode == NL80211_IFTYPE_STATION) { - if (channel->band == IEEE80211_BAND_2GHZ) - config_bands = BAND_B | BAND_G | BAND_GN; - else - config_bands = BAND_A | BAND_AN; - - if (!((config_bands | priv->adapter->fw_bands) & - ~priv->adapter->fw_bands)) - priv->adapter->config_bands = config_bands; - } - } - /* As this is new association, clear locally stored * keys and security related flags */ priv->sec_info.wpa_enabled = false; diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 60e88b58039d..f542bb8ccbc8 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -283,6 +283,20 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, if (ret) goto done; + if (bss_desc) { + u8 config_bands = 0; + + if (mwifiex_band_to_radio_type((u8) bss_desc->bss_band) + == HostCmd_SCAN_RADIO_TYPE_BG) + config_bands = BAND_B | BAND_G | BAND_GN; + else + config_bands = BAND_A | BAND_AN; + + if (!((config_bands | adapter->fw_bands) & + ~adapter->fw_bands)) + adapter->config_bands = config_bands; + } + ret = mwifiex_check_network_compatibility(priv, bss_desc); if (ret) goto done; -- cgit v1.2.3 From 3b86acb8088d0c7c4cddc340a13dec5cef110e30 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 8 Jan 2013 17:53:11 -0800 Subject: mwifiex: correct config_bands handling for ibss network BAND_G is implicit when BAND_GN is present. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index e74e1b99419a..cdb11b3964e2 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1694,7 +1694,7 @@ static int mwifiex_set_ibss_params(struct mwifiex_private *priv, if (cfg80211_get_chandef_type(¶ms->chandef) != NL80211_CHAN_NO_HT) - config_bands |= BAND_GN; + config_bands |= BAND_G | BAND_GN; } else { if (cfg80211_get_chandef_type(¶ms->chandef) == NL80211_CHAN_NO_HT) -- cgit v1.2.3 From 0981c3b24ef664f5611008a6e6d0622fac6d892b Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 9 Jan 2013 16:07:48 +0530 Subject: ath9k_htc: Fix memory leak SKBs that are allocated in the HTC layer do not have callbacks registered and hence ended up not being freed, Fix this by freeing them properly in the TX completion routine. Cc: Reported-by: Larry Finger Signed-off-by: Sujith Manoharan Tested-by: Larry Finger Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_hst.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c index 4a9570dfba72..aac4a406a513 100644 --- a/drivers/net/wireless/ath/ath9k/htc_hst.c +++ b/drivers/net/wireless/ath/ath9k/htc_hst.c @@ -344,6 +344,8 @@ void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle, endpoint->ep_callbacks.tx(endpoint->ep_callbacks.priv, skb, htc_hdr->endpoint_id, txok); + } else { + kfree_skb(skb); } } -- cgit v1.2.3 From a3dc48e82bb146ef11cf75676c8410c1df29b0c4 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:52 +0100 Subject: ath9k: do not link receive buffers during flush On AR9300 the rx FIFO needs to be empty during reset to ensure that no further DMA activity is generated, otherwise it might lead to memory corruption issues. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/recv.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index d4df98a938bf..01c3ba47a5b9 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -744,6 +744,7 @@ static struct ath_buf *ath_get_next_rx_buf(struct ath_softc *sc, return NULL; } + list_del(&bf->list); if (!bf->bf_mpdu) return bf; @@ -1254,14 +1255,15 @@ requeue_drop_frag: sc->rx.frag = NULL; } requeue: + list_add_tail(&bf->list, &sc->rx.rxbuf); + if (flush) + continue; + if (edma) { - list_add_tail(&bf->list, &sc->rx.rxbuf); ath_rx_edma_buf_link(sc, qtype); } else { - list_move_tail(&bf->list, &sc->rx.rxbuf); ath_rx_buf_link(sc, bf); - if (!flush) - ath9k_hw_rxena(ah); + ath9k_hw_rxena(ah); } } while (1); -- cgit v1.2.3 From 1adb2e2b5f85023d17eb4f95386a57029df27c88 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:53 +0100 Subject: ath9k: fix double-free bug on beacon generate failure When the next beacon is sent, the ath_buf from the previous run is reused. If getting a new beacon from mac80211 fails, bf->bf_mpdu is not reset, yet the skb is freed, leading to a double-free on the next beacon tx attempt, resulting in a system crash. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/beacon.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 531fffd801a3..4eb269d6b974 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -147,6 +147,7 @@ static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw, skb->len, DMA_TO_DEVICE); dev_kfree_skb_any(skb); bf->bf_buf_addr = 0; + bf->bf_mpdu = NULL; } skb = ieee80211_beacon_get(hw, vif); -- cgit v1.2.3 From 3adcf20afb585993ffee24de36d1975f6b26b120 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:54 +0100 Subject: ath9k: remove the WARN_ON that triggers if generating a beacon fails During teardown, mac80211 will not return a new beacon. This is normal and handled properly in the driver, so there's no need to spam the user with a kernel warning here. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/beacon.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 4eb269d6b974..2ca355e94da6 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -360,7 +360,6 @@ void ath9k_beacon_tasklet(unsigned long data) return; bf = ath9k_beacon_generate(sc->hw, vif); - WARN_ON(!bf); if (sc->beacon.bmisscnt != 0) { ath_dbg(common, BSTUCK, "resume beacon xmit after %u misses\n", -- cgit v1.2.3 From 7fc00a3054b70b1794c2d64db703eb467ad0365c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:55 +0100 Subject: ath9k: add a better fix for the rx tasklet vs rx flush race Ensure that the rx tasklet is no longer running when entering the reset path. Also remove the distinction between flush and no-flush frame processing. If a frame has been received and ACKed by the hardware, the stack needs to see it, so that the BA receive window does not go out of sync. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/debug.c | 1 - drivers/net/wireless/ath/ath9k/debug.h | 2 -- drivers/net/wireless/ath/ath9k/main.c | 4 ++++ drivers/net/wireless/ath/ath9k/recv.c | 15 --------------- 5 files changed, 4 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 86e26a19efda..7335e9ef0249 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -646,7 +646,6 @@ void ath_ant_comb_update(struct ath_softc *sc); enum sc_op_flags { SC_OP_INVALID, SC_OP_BEACONS, - SC_OP_RXFLUSH, SC_OP_ANI_RUN, SC_OP_PRIM_STA_VIF, SC_OP_HW_RESET, diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 13ff9edc2401..e585fc827c50 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -861,7 +861,6 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf, RXS_ERR("RX-LENGTH-ERR", rx_len_err); RXS_ERR("RX-OOM-ERR", rx_oom_err); RXS_ERR("RX-RATE-ERR", rx_rate_err); - RXS_ERR("RX-DROP-RXFLUSH", rx_drop_rxflush); RXS_ERR("RX-TOO-MANY-FRAGS", rx_too_many_frags_err); PHY_ERR("UNDERRUN ERR", ATH9K_PHYERR_UNDERRUN); diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index 375c3b46411e..6df2ab62dcb7 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -216,7 +216,6 @@ struct ath_tx_stats { * @rx_oom_err: No. of frames dropped due to OOM issues. * @rx_rate_err: No. of frames dropped due to rate errors. * @rx_too_many_frags_err: Frames dropped due to too-many-frags received. - * @rx_drop_rxflush: No. of frames dropped due to RX-FLUSH. * @rx_beacons: No. of beacons received. * @rx_frags: No. of rx-fragements received. */ @@ -235,7 +234,6 @@ struct ath_rx_stats { u32 rx_oom_err; u32 rx_rate_err; u32 rx_too_many_frags_err; - u32 rx_drop_rxflush; u32 rx_beacons; u32 rx_frags; }; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index be30a9af1528..d3cf01ec2d15 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -196,6 +196,8 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); + tasklet_disable(&sc->intr_tq); + if (!ath_stoprecv(sc)) ret = false; @@ -210,6 +212,8 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath_flushrecv(sc); } + tasklet_enable(&sc->intr_tq); + return ret; } diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 01c3ba47a5b9..6b83b3bbfe8c 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -286,7 +286,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) spin_lock_init(&sc->sc_pcu_lock); spin_lock_init(&sc->rx.rxbuflock); - clear_bit(SC_OP_RXFLUSH, &sc->sc_flags); common->rx_bufsize = IEEE80211_MAX_MPDU_LEN / 2 + sc->sc_ah->caps.rx_status_len; @@ -501,11 +500,9 @@ bool ath_stoprecv(struct ath_softc *sc) void ath_flushrecv(struct ath_softc *sc) { - set_bit(SC_OP_RXFLUSH, &sc->sc_flags); if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) ath_rx_tasklet(sc, 1, true); ath_rx_tasklet(sc, 1, false); - clear_bit(SC_OP_RXFLUSH, &sc->sc_flags); } static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) @@ -1067,9 +1064,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) do { bool decrypt_error = false; - /* If handling rx interrupt and flush is in progress => exit */ - if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags) && (flush == 0)) - break; memset(&rs, 0, sizeof(rs)); if (edma) @@ -1112,15 +1106,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) ath_debug_stat_rx(sc, &rs); - /* - * If we're asked to flush receive queue, directly - * chain it back at the queue without processing it. - */ - if (test_bit(SC_OP_RXFLUSH, &sc->sc_flags)) { - RX_STAT_INC(rx_drop_rxflush); - goto requeue_drop_frag; - } - memset(rxs, 0, sizeof(struct ieee80211_rx_status)); rxs->mactime = (tsf & ~0xffffffffULL) | rs.rs_tstamp; -- cgit v1.2.3 From 4b883f021b9ccf2df3d14425e6e610281fb6a35e Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 9 Jan 2013 16:16:56 +0100 Subject: ath9k: fix rx flush handling Right now the rx flush is not doing anything useful on AR9003+, as it only works if the buffers in the rx FIFO have not been purged yet, as is done by ath_stoprecv. To fix this, always call ath_flushrecv from within ath_stoprecv before the FIFO is emptied, but still after the hw receive path has been stopped. This ensures that frames received (and ACKed by the hardware) shortly before a reset will be seen by the software, which should improve A-MPDU session stability. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/main.c | 16 +++------------- drivers/net/wireless/ath/ath9k/recv.c | 16 +++++++++------- 3 files changed, 12 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 7335e9ef0249..32b2d5cd9a5a 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -328,7 +328,6 @@ struct ath_rx { int ath_startrecv(struct ath_softc *sc); bool ath_stoprecv(struct ath_softc *sc); -void ath_flushrecv(struct ath_softc *sc); u32 ath_calcrxfilter(struct ath_softc *sc); int ath_rx_init(struct ath_softc *sc, int nbufs); void ath_rx_cleanup(struct ath_softc *sc); diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index d3cf01ec2d15..9844b758f81d 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -182,7 +182,7 @@ static void ath_restart_work(struct ath_softc *sc) ath_start_ani(sc); } -static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) +static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx) { struct ath_hw *ah = sc->sc_ah; bool ret = true; @@ -204,14 +204,6 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) if (!ath_drain_all_txq(sc, retry_tx)) ret = false; - if (!flush) { - if (ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - ath_rx_tasklet(sc, 1, true); - ath_rx_tasklet(sc, 1, false); - } else { - ath_flushrecv(sc); - } - tasklet_enable(&sc->intr_tq); return ret; @@ -266,7 +258,6 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, struct ath_common *common = ath9k_hw_common(ah); struct ath9k_hw_cal_data *caldata = NULL; bool fastcc = true; - bool flush = false; int r; __ath_cancel_work(sc); @@ -280,11 +271,10 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, if (!hchan) { fastcc = false; - flush = true; hchan = ah->curchan; } - if (!ath_prepare_reset(sc, retry_tx, flush)) + if (!ath_prepare_reset(sc, retry_tx)) fastcc = false; ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n", @@ -808,7 +798,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) ath9k_hw_cfg_gpio_input(ah, ah->led_pin); } - ath_prepare_reset(sc, false, true); + ath_prepare_reset(sc, false); if (sc->rx.frag) { dev_kfree_skb_any(sc->rx.frag); diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 6b83b3bbfe8c..67f58d4bb10e 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -472,6 +472,13 @@ start_recv: return 0; } +static void ath_flushrecv(struct ath_softc *sc) +{ + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) + ath_rx_tasklet(sc, 1, true); + ath_rx_tasklet(sc, 1, false); +} + bool ath_stoprecv(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; @@ -482,6 +489,8 @@ bool ath_stoprecv(struct ath_softc *sc) ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah, &reset); + ath_flushrecv(sc); + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) ath_edma_stop_recv(sc); else @@ -498,13 +507,6 @@ bool ath_stoprecv(struct ath_softc *sc) return stopped && !reset; } -void ath_flushrecv(struct ath_softc *sc) -{ - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - ath_rx_tasklet(sc, 1, true); - ath_rx_tasklet(sc, 1, false); -} - static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb) { /* Check whether the Beacon frame has DTIM indicating buffered bc/mc */ -- cgit v1.2.3 From a1fe52801a992e590cdaee2fb47a94bac9b5da90 Mon Sep 17 00:00:00 2001 From: Piotr Haber Date: Thu, 10 Jan 2013 11:20:48 +0100 Subject: brcmsmac: increase timer reference count for new timers only On hardware reintialization reference count of already existing timers would be increased again. This leads to problems on module unloading. Cc: stable@vger.kernel.org Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Reviewed-by: Arend van Spriel Signed-off-by: Piotr Haber Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 1fbd8ecbe2ea..0f71d1d4339d 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -1407,9 +1407,10 @@ void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic) #endif t->ms = ms; t->periodic = (bool) periodic; - t->set = true; - - atomic_inc(&t->wl->callbacks); + if (!t->set) { + t->set = true; + atomic_inc(&t->wl->callbacks); + } ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms)); } -- cgit v1.2.3 From 29b7d9ad9112a95757c8030421dc3bd1b28ad8b5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 6 Dec 2012 23:10:40 +0100 Subject: drivers/nfc/nfcwilink.c: use devm_kzalloc devm_kzalloc allocates memory that is released when a driver detaches. This patch uses devm_kzalloc for data that is allocated in the probe function of a platform device and is only freed in the remove function. Signed-off-by: Julia Lawall Signed-off-by: John W. Linville --- drivers/nfc/nfcwilink.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/drivers/nfc/nfcwilink.c b/drivers/nfc/nfcwilink.c index 50b1ee41afc6..c7c182d2b7df 100644 --- a/drivers/nfc/nfcwilink.c +++ b/drivers/nfc/nfcwilink.c @@ -526,7 +526,7 @@ static int nfcwilink_probe(struct platform_device *pdev) nfc_dev_dbg(&pdev->dev, "probe entry"); - drv = kzalloc(sizeof(struct nfcwilink), GFP_KERNEL); + drv = devm_kzalloc(&pdev->dev, sizeof(struct nfcwilink), GFP_KERNEL); if (!drv) { rc = -ENOMEM; goto exit; @@ -547,7 +547,7 @@ static int nfcwilink_probe(struct platform_device *pdev) if (!drv->ndev) { nfc_dev_err(&pdev->dev, "nci_allocate_device failed"); rc = -ENOMEM; - goto free_exit; + goto exit; } nci_set_parent_dev(drv->ndev, &pdev->dev); @@ -566,9 +566,6 @@ static int nfcwilink_probe(struct platform_device *pdev) free_dev_exit: nci_free_device(drv->ndev); -free_exit: - kfree(drv); - exit: return rc; } @@ -588,8 +585,6 @@ static int nfcwilink_remove(struct platform_device *pdev) nci_unregister_device(ndev); nci_free_device(ndev); - kfree(drv); - dev_set_drvdata(&pdev->dev, NULL); return 0; -- cgit v1.2.3 From b66851c3c89629e72a2eaa54d1b838fb74dad644 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 7 Jan 2013 14:48:07 -0800 Subject: mac80211_hwsim: fix beacon timestamp and mactime Set the beacon timestamp once during "transmission" so the monitor interface also gets a timestamped beacon. Also use a common base between TX timestamp and RX mactime. This eliminates "TX" path delay, which shows up as a constant error in Toffset. Get the global TSF once before iterating over all RX HWs, so they all set a mactime with the same time base. Signed-off-by: Thomas Pedersen Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 57 ++++++++++++++++++++++++----------- 1 file changed, 39 insertions(+), 18 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index b6e2caa024a7..b73e497fe770 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -363,6 +363,8 @@ struct mac80211_hwsim_data { /* difference between this hw's clock and the real clock, in usecs */ s64 tsf_offset; s64 bcn_delta; + /* absolute beacon transmission time. Used to cover up "tx" delay. */ + u64 abs_bcn_ts; }; @@ -410,15 +412,19 @@ static netdev_tx_t hwsim_mon_xmit(struct sk_buff *skb, return NETDEV_TX_OK; } +static inline u64 mac80211_hwsim_get_tsf_raw(void) +{ + return ktime_to_us(ktime_get_real()); +} + static __le64 __mac80211_hwsim_get_tsf(struct mac80211_hwsim_data *data) { - struct timeval tv = ktime_to_timeval(ktime_get_real()); - u64 now = tv.tv_sec * USEC_PER_SEC + tv.tv_usec; + u64 now = mac80211_hwsim_get_tsf_raw(); return cpu_to_le64(now + data->tsf_offset); } static u64 mac80211_hwsim_get_tsf(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) + struct ieee80211_vif *vif) { struct mac80211_hwsim_data *data = hw->priv; return le64_to_cpu(__mac80211_hwsim_get_tsf(data)); @@ -705,7 +711,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_rx_status rx_status; - struct ieee80211_rate *txrate = ieee80211_get_tx_rate(hw, info); + u64 now; memset(&rx_status, 0, sizeof(rx_status)); rx_status.flag |= RX_FLAG_MACTIME_START; @@ -731,11 +737,23 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw, secpath_reset(skb); nf_reset(skb); + /* + * Get absolute mactime here so all HWs RX at the "same time", and + * absolute TX time for beacon mactime so the timestamp matches. + * Giving beacons a different mactime than non-beacons looks messy, but + * it helps the Toffset be exact and a ~10us mactime discrepancy + * probably doesn't really matter. + */ + if (ieee80211_is_beacon(hdr->frame_control) || + ieee80211_is_probe_resp(hdr->frame_control)) + now = data->abs_bcn_ts; + else + now = mac80211_hwsim_get_tsf_raw(); + /* Copy skb to all enabled radios that are on the current frequency */ spin_lock(&hwsim_radio_lock); list_for_each_entry(data2, &hwsim_radios, list) { struct sk_buff *nskb; - struct ieee80211_mgmt *mgmt; struct tx_iter_data tx_iter_data = { .receive = false, .channel = chan, @@ -787,17 +805,7 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw, if (mac80211_hwsim_addr_match(data2, hdr->addr1)) ack = true; - /* set bcn timestamp relative to receiver mactime */ - rx_status.mactime = - le64_to_cpu(__mac80211_hwsim_get_tsf(data2)); - mgmt = (struct ieee80211_mgmt *) nskb->data; - if (ieee80211_is_beacon(mgmt->frame_control) || - ieee80211_is_probe_resp(mgmt->frame_control)) - mgmt->u.beacon.timestamp = cpu_to_le64( - rx_status.mactime + - (data->tsf_offset - data2->tsf_offset) + - 24 * 8 * 10 / txrate->bitrate); - + rx_status.mactime = now + data2->tsf_offset; #if 0 /* * Don't enable this code by default as the OUI 00:00:00 @@ -987,7 +995,11 @@ static void mac80211_hwsim_tx_frame(struct ieee80211_hw *hw, static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac, struct ieee80211_vif *vif) { - struct ieee80211_hw *hw = arg; + struct mac80211_hwsim_data *data = arg; + struct ieee80211_hw *hw = data->hw; + struct ieee80211_tx_info *info; + struct ieee80211_rate *txrate; + struct ieee80211_mgmt *mgmt; struct sk_buff *skb; hwsim_check_magic(vif); @@ -1000,6 +1012,15 @@ static void mac80211_hwsim_beacon_tx(void *arg, u8 *mac, skb = ieee80211_beacon_get(hw, vif); if (skb == NULL) return; + info = IEEE80211_SKB_CB(skb); + txrate = ieee80211_get_tx_rate(hw, info); + + mgmt = (struct ieee80211_mgmt *) skb->data; + /* fake header transmission time */ + data->abs_bcn_ts = mac80211_hwsim_get_tsf_raw(); + mgmt->u.beacon.timestamp = cpu_to_le64(data->abs_bcn_ts + + data->tsf_offset + + 24 * 8 * 10 / txrate->bitrate); mac80211_hwsim_tx_frame(hw, skb, rcu_dereference(vif->chanctx_conf)->def.chan); @@ -1020,7 +1041,7 @@ mac80211_hwsim_beacon(struct hrtimer *timer) ieee80211_iterate_active_interfaces_atomic( hw, IEEE80211_IFACE_ITER_NORMAL, - mac80211_hwsim_beacon_tx, hw); + mac80211_hwsim_beacon_tx, data); /* beacon at new TBTT + beacon interval */ if (data->bcn_delta) { -- cgit v1.2.3 From 590152789121640bfccb2d155458819951771363 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 10 Jan 2013 10:11:37 +0100 Subject: ssb: add database of serial flash memories MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: John W. Linville --- drivers/ssb/driver_chipcommon_sflash.c | 122 +++++++++++++++++++++++++++++++++ 1 file changed, 122 insertions(+) diff --git a/drivers/ssb/driver_chipcommon_sflash.c b/drivers/ssb/driver_chipcommon_sflash.c index 866269774e86..720665ca2bb1 100644 --- a/drivers/ssb/driver_chipcommon_sflash.c +++ b/drivers/ssb/driver_chipcommon_sflash.c @@ -9,9 +9,131 @@ #include "ssb_private.h" +struct ssb_sflash_tbl_e { + char *name; + u32 id; + u32 blocksize; + u16 numblocks; +}; + +static struct ssb_sflash_tbl_e ssb_sflash_st_tbl[] = { + { "M25P20", 0x11, 0x10000, 4, }, + { "M25P40", 0x12, 0x10000, 8, }, + + { "M25P16", 0x14, 0x10000, 32, }, + { "M25P32", 0x15, 0x10000, 64, }, + { "M25P64", 0x16, 0x10000, 128, }, + { "M25FL128", 0x17, 0x10000, 256, }, + { 0 }, +}; + +static struct ssb_sflash_tbl_e ssb_sflash_sst_tbl[] = { + { "SST25WF512", 1, 0x1000, 16, }, + { "SST25VF512", 0x48, 0x1000, 16, }, + { "SST25WF010", 2, 0x1000, 32, }, + { "SST25VF010", 0x49, 0x1000, 32, }, + { "SST25WF020", 3, 0x1000, 64, }, + { "SST25VF020", 0x43, 0x1000, 64, }, + { "SST25WF040", 4, 0x1000, 128, }, + { "SST25VF040", 0x44, 0x1000, 128, }, + { "SST25VF040B", 0x8d, 0x1000, 128, }, + { "SST25WF080", 5, 0x1000, 256, }, + { "SST25VF080B", 0x8e, 0x1000, 256, }, + { "SST25VF016", 0x41, 0x1000, 512, }, + { "SST25VF032", 0x4a, 0x1000, 1024, }, + { "SST25VF064", 0x4b, 0x1000, 2048, }, + { 0 }, +}; + +static struct ssb_sflash_tbl_e ssb_sflash_at_tbl[] = { + { "AT45DB011", 0xc, 256, 512, }, + { "AT45DB021", 0x14, 256, 1024, }, + { "AT45DB041", 0x1c, 256, 2048, }, + { "AT45DB081", 0x24, 256, 4096, }, + { "AT45DB161", 0x2c, 512, 4096, }, + { "AT45DB321", 0x34, 512, 8192, }, + { "AT45DB642", 0x3c, 1024, 8192, }, + { 0 }, +}; + +static void ssb_sflash_cmd(struct ssb_chipcommon *cc, u32 opcode) +{ + int i; + chipco_write32(cc, SSB_CHIPCO_FLASHCTL, + SSB_CHIPCO_FLASHCTL_START | opcode); + for (i = 0; i < 1000; i++) { + if (!(chipco_read32(cc, SSB_CHIPCO_FLASHCTL) & + SSB_CHIPCO_FLASHCTL_BUSY)) + return; + cpu_relax(); + } + pr_err("SFLASH control command failed (timeout)!\n"); +} + /* Initialize serial flash access */ int ssb_sflash_init(struct ssb_chipcommon *cc) { + struct ssb_sflash_tbl_e *e; + u32 id, id2; + + switch (cc->capabilities & SSB_CHIPCO_CAP_FLASHT) { + case SSB_CHIPCO_FLASHT_STSER: + ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_DP); + + chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 0); + ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); + id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); + + chipco_write32(cc, SSB_CHIPCO_FLASHADDR, 1); + ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_ST_RES); + id2 = chipco_read32(cc, SSB_CHIPCO_FLASHDATA); + + switch (id) { + case 0xbf: + for (e = ssb_sflash_sst_tbl; e->name; e++) { + if (e->id == id2) + break; + } + break; + case 0x13: + return -ENOTSUPP; + default: + for (e = ssb_sflash_st_tbl; e->name; e++) { + if (e->id == id) + break; + } + break; + } + if (!e->name) { + pr_err("Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", + id, id2); + return -ENOTSUPP; + } + + break; + case SSB_CHIPCO_FLASHT_ATSER: + ssb_sflash_cmd(cc, SSB_CHIPCO_FLASHCTL_AT_STATUS); + id = chipco_read32(cc, SSB_CHIPCO_FLASHDATA) & 0x3c; + + for (e = ssb_sflash_at_tbl; e->name; e++) { + if (e->id == id) + break; + } + if (!e->name) { + pr_err("Unsupported Atmel serial flash (id: 0x%X)\n", + id); + return -ENOTSUPP; + } + + break; + default: + pr_err("Unsupported flash type\n"); + return -ENOTSUPP; + } + + pr_info("Found %s serial flash (blocksize: 0x%X, blocks: %d)\n", + e->name, e->blocksize, e->numblocks); + pr_err("Serial flash support is not implemented yet!\n"); return -ENOTSUPP; -- cgit v1.2.3 From aad12ede97d62b290ac03f0077d05b999bbddd05 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Thu, 10 Jan 2013 11:45:14 +0100 Subject: ath9k: fix spectral scan endless mode on AR9002 There was a copy+paste error in ar9002 for the endless spectral mode, fix that. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 51b7c8130ae4..2cb665e2ea22 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -581,7 +581,7 @@ void ar9002_hw_spectral_scan_config(struct ath_hw *ah, */ count = param->count; if (param->endless) - count = 0; + count = 0x80; else if (count & 0x80) count = 0x7f; -- cgit v1.2.3 From 1a2d50329832c4b5c77be569f20eec303a0d07b8 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Thu, 10 Jan 2013 17:52:38 +0100 Subject: bcma: fix compile error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This error was introduced in: commit e3f05a42faac627d8704c76c1927e09b22443b7b Author: Hauke Mehrtens Date: Fri Jan 4 00:51:21 2013 +0100 bcma: mips: explicit assign IRQ numbers CC drivers/bcma/driver_mips.o drivers/bcma/driver_mips.c: In function 'bcma_core_mips_init': drivers/bcma/driver_mips.c:302:4: error: implicit declaration of function 'bcma_core_irq' [-Werror=implicit-function-declaration] cc1: some warnings being treated as errors make[6]: *** [drivers/bcma/driver_mips.o] Error 1 Reported-by: RafaÅ‚ MiÅ‚ecki Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_mips.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 8a51c7950536..90f20a247725 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -299,7 +299,7 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) break; default: list_for_each_entry(core, &bus->cores, list) { - core->irq = bcma_core_irq(core); + core->irq = bcma_core_mips_irq(core) + 2; } bcma_err(bus, "Unknown device (0x%x) found, can not configure IRQs\n", -- cgit v1.2.3 From e2aa19fadd718d7dd920a3994118863861a4b61e Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Thu, 10 Jan 2013 17:54:09 +0100 Subject: bcma: return the mips irq number in bcma_core_irq The irq signal numbers that are send by the cpu are increased by 2 from the number programmed into the mips core by bcma. Return the irq number on which the irqs are send in bcma_core_irq() now. Signed-off-by: Nathan Hintz Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville --- arch/mips/bcm47xx/serial.c | 2 +- drivers/bcma/driver_chipcommon.c | 2 +- drivers/bcma/driver_mips.c | 12 +++++++++--- drivers/bcma/driver_pci_host.c | 4 ++-- include/linux/bcma/bcma_driver_mips.h | 2 +- 5 files changed, 14 insertions(+), 8 deletions(-) diff --git a/arch/mips/bcm47xx/serial.c b/arch/mips/bcm47xx/serial.c index 57981e4fe2bc..b8ef965705cf 100644 --- a/arch/mips/bcm47xx/serial.c +++ b/arch/mips/bcm47xx/serial.c @@ -62,7 +62,7 @@ static int __init uart8250_init_bcma(void) p->mapbase = (unsigned int) bcma_port->regs; p->membase = (void *) bcma_port->regs; - p->irq = bcma_port->irq + 2; + p->irq = bcma_port->irq; p->uartclk = bcma_port->baud_base; p->regshift = bcma_port->reg_shift; p->iotype = UPIO_MEM; diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c index e461ad25fda4..28fa50ad87be 100644 --- a/drivers/bcma/driver_chipcommon.c +++ b/drivers/bcma/driver_chipcommon.c @@ -329,7 +329,7 @@ void bcma_chipco_serial_init(struct bcma_drv_cc *cc) return; } - irq = bcma_core_mips_irq(cc->core); + irq = bcma_core_irq(cc->core); /* Determine the registers of the UARTs */ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART); diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index 90f20a247725..a808404db4b1 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -85,7 +85,7 @@ static u32 bcma_core_mips_irqflag(struct bcma_device *dev) * If disabled, 5 is returned. * If not supported, 6 is returned. */ -unsigned int bcma_core_mips_irq(struct bcma_device *dev) +static unsigned int bcma_core_mips_irq(struct bcma_device *dev) { struct bcma_device *mdev = dev->bus->drv_mips.core; u32 irqflag; @@ -102,7 +102,13 @@ unsigned int bcma_core_mips_irq(struct bcma_device *dev) return 5; } -EXPORT_SYMBOL(bcma_core_mips_irq); + +unsigned int bcma_core_irq(struct bcma_device *dev) +{ + unsigned int mips_irq = bcma_core_mips_irq(dev); + return mips_irq <= 4 ? mips_irq + 2 : 0; +} +EXPORT_SYMBOL(bcma_core_irq); static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) { @@ -299,7 +305,7 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) break; default: list_for_each_entry(core, &bus->cores, list) { - core->irq = bcma_core_mips_irq(core) + 2; + core->irq = bcma_core_irq(core); } bcma_err(bus, "Unknown device (0x%x) found, can not configure IRQs\n", diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index e6b5c89469dc..ef9f0938da77 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -577,7 +577,7 @@ int bcma_core_pci_plat_dev_init(struct pci_dev *dev) pr_info("PCI: Fixing up device %s\n", pci_name(dev)); /* Fix up interrupt lines */ - dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; + dev->irq = bcma_core_irq(pc_host->pdev->core); pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); return 0; @@ -596,6 +596,6 @@ int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, pci_ops); - return bcma_core_mips_irq(pc_host->pdev->core) + 2; + return bcma_core_irq(pc_host->pdev->core); } EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index 6495579e3f35..73c7f4b882cc 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -48,6 +48,6 @@ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { } extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); -extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); +extern unsigned int bcma_core_irq(struct bcma_device *core); #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ -- cgit v1.2.3 From eab6d7921d5704128c941d7cc647dacd4d50697c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 10 Jan 2013 19:41:52 +0100 Subject: ath9k_hw: add tx gain tables for newer devices Improves stability on affected devices and also fixes the Tx IQ calibration related regression on some AR9340 devices such as the TP-Link TL-WDR4300. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- .../net/wireless/ath/ath9k/ar9003_2p2_initvals.h | 180 +++++++++++++++++++++ drivers/net/wireless/ath/ath9k/ar9003_hw.c | 67 +++++--- drivers/net/wireless/ath/ath9k/ar9340_initvals.h | 100 ++++++++++++ drivers/net/wireless/ath/ath9k/ar9485_initvals.h | 146 +++++++++++++++++ .../net/wireless/ath/ath9k/ar9580_1p0_initvals.h | 76 +++++++++ drivers/net/wireless/ath/ath9k/reg.h | 4 + 6 files changed, 555 insertions(+), 18 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h index 262e1e036fd7..db5ffada2217 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h @@ -744,6 +744,186 @@ static const u32 ar9300Modes_high_ob_db_tx_gain_table_2p2[][5] = { {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, }; +static const u32 ar9300Modes_mixed_ob_db_tx_gain_table_2p2[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x0000a2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000a2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000a2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, + {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, + {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, + {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200}, + {0x0000a510, 0x16000220, 0x16000220, 0x0f000202, 0x0f000202}, + {0x0000a514, 0x1c000223, 0x1c000223, 0x11000400, 0x11000400}, + {0x0000a518, 0x21002220, 0x21002220, 0x15000402, 0x15000402}, + {0x0000a51c, 0x27002223, 0x27002223, 0x19000404, 0x19000404}, + {0x0000a520, 0x2b022220, 0x2b022220, 0x1b000603, 0x1b000603}, + {0x0000a524, 0x2f022222, 0x2f022222, 0x1f000a02, 0x1f000a02}, + {0x0000a528, 0x34022225, 0x34022225, 0x23000a04, 0x23000a04}, + {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x26000a20, 0x26000a20}, + {0x0000a530, 0x3e02222c, 0x3e02222c, 0x2a000e20, 0x2a000e20}, + {0x0000a534, 0x4202242a, 0x4202242a, 0x2e000e22, 0x2e000e22}, + {0x0000a538, 0x4702244a, 0x4702244a, 0x31000e24, 0x31000e24}, + {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x34001640, 0x34001640}, + {0x0000a540, 0x4e02246c, 0x4e02246c, 0x38001660, 0x38001660}, + {0x0000a544, 0x52022470, 0x52022470, 0x3b001861, 0x3b001861}, + {0x0000a548, 0x55022490, 0x55022490, 0x3e001a81, 0x3e001a81}, + {0x0000a54c, 0x59022492, 0x59022492, 0x42001a83, 0x42001a83}, + {0x0000a550, 0x5d022692, 0x5d022692, 0x44001c84, 0x44001c84}, + {0x0000a554, 0x61022892, 0x61022892, 0x48001ce3, 0x48001ce3}, + {0x0000a558, 0x65024890, 0x65024890, 0x4c001ce5, 0x4c001ce5}, + {0x0000a55c, 0x69024892, 0x69024892, 0x50001ce9, 0x50001ce9}, + {0x0000a560, 0x6e024c92, 0x6e024c92, 0x54001ceb, 0x54001ceb}, + {0x0000a564, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a568, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a56c, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a570, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a574, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a578, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a57c, 0x74026e92, 0x74026e92, 0x56001eec, 0x56001eec}, + {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000}, + {0x0000a584, 0x06800003, 0x06800003, 0x04800002, 0x04800002}, + {0x0000a588, 0x0a800020, 0x0a800020, 0x08800004, 0x08800004}, + {0x0000a58c, 0x10800023, 0x10800023, 0x0b800200, 0x0b800200}, + {0x0000a590, 0x16800220, 0x16800220, 0x0f800202, 0x0f800202}, + {0x0000a594, 0x1c800223, 0x1c800223, 0x11800400, 0x11800400}, + {0x0000a598, 0x21802220, 0x21802220, 0x15800402, 0x15800402}, + {0x0000a59c, 0x27802223, 0x27802223, 0x19800404, 0x19800404}, + {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1b800603, 0x1b800603}, + {0x0000a5a4, 0x2f822222, 0x2f822222, 0x1f800a02, 0x1f800a02}, + {0x0000a5a8, 0x34822225, 0x34822225, 0x23800a04, 0x23800a04}, + {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x26800a20, 0x26800a20}, + {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x2a800e20, 0x2a800e20}, + {0x0000a5b4, 0x4282242a, 0x4282242a, 0x2e800e22, 0x2e800e22}, + {0x0000a5b8, 0x4782244a, 0x4782244a, 0x31800e24, 0x31800e24}, + {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x34801640, 0x34801640}, + {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x38801660, 0x38801660}, + {0x0000a5c4, 0x52822470, 0x52822470, 0x3b801861, 0x3b801861}, + {0x0000a5c8, 0x55822490, 0x55822490, 0x3e801a81, 0x3e801a81}, + {0x0000a5cc, 0x59822492, 0x59822492, 0x42801a83, 0x42801a83}, + {0x0000a5d0, 0x5d822692, 0x5d822692, 0x44801c84, 0x44801c84}, + {0x0000a5d4, 0x61822892, 0x61822892, 0x48801ce3, 0x48801ce3}, + {0x0000a5d8, 0x65824890, 0x65824890, 0x4c801ce5, 0x4c801ce5}, + {0x0000a5dc, 0x69824892, 0x69824892, 0x50801ce9, 0x50801ce9}, + {0x0000a5e0, 0x6e824c92, 0x6e824c92, 0x54801ceb, 0x54801ceb}, + {0x0000a5e4, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5e8, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5ec, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5f0, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5f4, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5f8, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a5fc, 0x74826e92, 0x74826e92, 0x56801eec, 0x56801eec}, + {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a614, 0x02004000, 0x02004000, 0x01404000, 0x01404000}, + {0x0000a618, 0x02004801, 0x02004801, 0x01404501, 0x01404501}, + {0x0000a61c, 0x02808a02, 0x02808a02, 0x02008501, 0x02008501}, + {0x0000a620, 0x0380ce03, 0x0380ce03, 0x0280ca03, 0x0280ca03}, + {0x0000a624, 0x04411104, 0x04411104, 0x03010c04, 0x03010c04}, + {0x0000a628, 0x04411104, 0x04411104, 0x04014c04, 0x04014c04}, + {0x0000a62c, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a630, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a634, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a638, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000a63c, 0x04411104, 0x04411104, 0x04015005, 0x04015005}, + {0x0000b2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000b2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000b2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, + {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000c2dc, 0x00033800, 0x00033800, 0x03aaa352, 0x03aaa352}, + {0x0000c2e0, 0x0003c000, 0x0003c000, 0x03ccc584, 0x03ccc584}, + {0x0000c2e4, 0x03fc0000, 0x03fc0000, 0x03f0f800, 0x03f0f800}, + {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x00016044, 0x012492d4, 0x012492d4, 0x056db2e4, 0x056db2e4}, + {0x00016048, 0x66480001, 0x66480001, 0x8e480001, 0x8e480001}, + {0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016444, 0x012492d4, 0x012492d4, 0x056db2e4, 0x056db2e4}, + {0x00016448, 0x66480001, 0x66480001, 0x8e480001, 0x8e480001}, + {0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016844, 0x012492d4, 0x012492d4, 0x056db2e4, 0x056db2e4}, + {0x00016848, 0x66480001, 0x66480001, 0x8e480001, 0x8e480001}, + {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, +}; + +static const u32 ar9300Modes_type5_tx_gain_table_2p2[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x0000a2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000a2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000a2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, + {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, + {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200}, + {0x0000a510, 0x15000028, 0x15000028, 0x0f000202, 0x0f000202}, + {0x0000a514, 0x1b00002b, 0x1b00002b, 0x12000400, 0x12000400}, + {0x0000a518, 0x1f020028, 0x1f020028, 0x16000402, 0x16000402}, + {0x0000a51c, 0x2502002b, 0x2502002b, 0x19000404, 0x19000404}, + {0x0000a520, 0x2a04002a, 0x2a04002a, 0x1c000603, 0x1c000603}, + {0x0000a524, 0x2e06002a, 0x2e06002a, 0x21000a02, 0x21000a02}, + {0x0000a528, 0x3302202d, 0x3302202d, 0x25000a04, 0x25000a04}, + {0x0000a52c, 0x3804202c, 0x3804202c, 0x28000a20, 0x28000a20}, + {0x0000a530, 0x3c06202c, 0x3c06202c, 0x2c000e20, 0x2c000e20}, + {0x0000a534, 0x4108202d, 0x4108202d, 0x30000e22, 0x30000e22}, + {0x0000a538, 0x4506402d, 0x4506402d, 0x34000e24, 0x34000e24}, + {0x0000a53c, 0x4906222d, 0x4906222d, 0x38001640, 0x38001640}, + {0x0000a540, 0x4d062231, 0x4d062231, 0x3c001660, 0x3c001660}, + {0x0000a544, 0x50082231, 0x50082231, 0x3f001861, 0x3f001861}, + {0x0000a548, 0x5608422e, 0x5608422e, 0x43001a81, 0x43001a81}, + {0x0000a54c, 0x5e08442e, 0x5e08442e, 0x47001a83, 0x47001a83}, + {0x0000a550, 0x620a4431, 0x620a4431, 0x4a001c84, 0x4a001c84}, + {0x0000a554, 0x640a4432, 0x640a4432, 0x4e001ce3, 0x4e001ce3}, + {0x0000a558, 0x680a4434, 0x680a4434, 0x52001ce5, 0x52001ce5}, + {0x0000a55c, 0x6c0a6434, 0x6c0a6434, 0x56001ce9, 0x56001ce9}, + {0x0000a560, 0x6f0a6633, 0x6f0a6633, 0x5a001ceb, 0x5a001ceb}, + {0x0000a564, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a568, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a56c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a570, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a574, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a578, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a57c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a608, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a60c, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a610, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a614, 0x01804601, 0x01804601, 0x01404000, 0x01404000}, + {0x0000a618, 0x01804601, 0x01804601, 0x01404501, 0x01404501}, + {0x0000a61c, 0x01804601, 0x01804601, 0x02008501, 0x02008501}, + {0x0000a620, 0x03408d02, 0x03408d02, 0x0280ca03, 0x0280ca03}, + {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04}, + {0x0000a628, 0x03410d04, 0x03410d04, 0x04014c04, 0x04014c04}, + {0x0000a62c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a630, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a634, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a638, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a63c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000b2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000b2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000b2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000c2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000c2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000c2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016048, 0x65240001, 0x65240001, 0x66480001, 0x66480001}, + {0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016448, 0x65240001, 0x65240001, 0x66480001, 0x66480001}, + {0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016848, 0x65240001, 0x65240001, 0x66480001, 0x66480001}, + {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, +}; + static const u32 ar9300Common_rx_gain_table_2p2[][2] = { /* Addr allmodes */ {0x0000a000, 0x00010000}, diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index 74fd3977feeb..de8a56c92e1a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -507,28 +507,59 @@ static void ar9003_tx_gain_table_mode4(struct ath_hw *ah) else if (AR_SREV_9580(ah)) INIT_INI_ARRAY(&ah->iniModesTxGain, ar9580_1p0_mixed_ob_db_tx_gain_table); + else + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9300Modes_mixed_ob_db_tx_gain_table_2p2); +} + +static void ar9003_tx_gain_table_mode5(struct ath_hw *ah) +{ + if (AR_SREV_9485_11(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9485Modes_green_ob_db_tx_gain_1_1); + else if (AR_SREV_9340(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9340Modes_ub124_tx_gain_table_1p0); + else if (AR_SREV_9580(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9580_1p0_type5_tx_gain_table); + else if (AR_SREV_9300_22(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9300Modes_type5_tx_gain_table_2p2); } +static void ar9003_tx_gain_table_mode6(struct ath_hw *ah) +{ + if (AR_SREV_9340(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9340Modes_low_ob_db_and_spur_tx_gain_table_1p0); + else if (AR_SREV_9485_11(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9485Modes_green_spur_ob_db_tx_gain_1_1); + else if (AR_SREV_9580(ah)) + INIT_INI_ARRAY(&ah->iniModesTxGain, + ar9580_1p0_type6_tx_gain_table); +} + +typedef void (*ath_txgain_tab)(struct ath_hw *ah); + static void ar9003_tx_gain_table_apply(struct ath_hw *ah) { - switch (ar9003_hw_get_tx_gain_idx(ah)) { - case 0: - default: - ar9003_tx_gain_table_mode0(ah); - break; - case 1: - ar9003_tx_gain_table_mode1(ah); - break; - case 2: - ar9003_tx_gain_table_mode2(ah); - break; - case 3: - ar9003_tx_gain_table_mode3(ah); - break; - case 4: - ar9003_tx_gain_table_mode4(ah); - break; - } + static const ath_txgain_tab modes[] = { + ar9003_tx_gain_table_mode0, + ar9003_tx_gain_table_mode1, + ar9003_tx_gain_table_mode2, + ar9003_tx_gain_table_mode3, + ar9003_tx_gain_table_mode4, + ar9003_tx_gain_table_mode5, + ar9003_tx_gain_table_mode6, + }; + int idx = ar9003_hw_get_tx_gain_idx(ah); + + if (idx >= ARRAY_SIZE(modes)) + idx = 0; + + modes[idx](ah); } static void ar9003_rx_gain_table_mode0(struct ath_hw *ah) diff --git a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h index f69d292bdc02..25db9215985a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9340_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9340_initvals.h @@ -1172,6 +1172,106 @@ static const u32 ar9340Modes_mixed_ob_db_tx_gain_table_1p0[][5] = { {0x00016448, 0x24925666, 0x24925666, 0x8e481266, 0x8e481266}, }; +static const u32 ar9340Modes_low_ob_db_and_spur_tx_gain_table_1p0[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x0000a2dc, 0x0380c7fc, 0x0380c7fc, 0x03eaac5a, 0x03eaac5a}, + {0x0000a2e0, 0x0000f800, 0x0000f800, 0x03f330ac, 0x03f330ac}, + {0x0000a2e4, 0x03ff0000, 0x03ff0000, 0x03fc3f00, 0x03fc3f00}, + {0x0000a2e8, 0x00000000, 0x00000000, 0x03ffc000, 0x03ffc000}, + {0x0000a394, 0x00000444, 0x00000444, 0x00000404, 0x00000404}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a504, 0x06000003, 0x06000003, 0x02000001, 0x02000001}, + {0x0000a508, 0x0a000020, 0x0a000020, 0x05000003, 0x05000003}, + {0x0000a50c, 0x10000023, 0x10000023, 0x0a000005, 0x0a000005}, + {0x0000a510, 0x16000220, 0x16000220, 0x0e000201, 0x0e000201}, + {0x0000a514, 0x1c000223, 0x1c000223, 0x11000203, 0x11000203}, + {0x0000a518, 0x21002220, 0x21002220, 0x14000401, 0x14000401}, + {0x0000a51c, 0x27002223, 0x27002223, 0x18000403, 0x18000403}, + {0x0000a520, 0x2b022220, 0x2b022220, 0x1b000602, 0x1b000602}, + {0x0000a524, 0x2f022222, 0x2f022222, 0x1f000802, 0x1f000802}, + {0x0000a528, 0x34022225, 0x34022225, 0x21000620, 0x21000620}, + {0x0000a52c, 0x3a02222a, 0x3a02222a, 0x25000820, 0x25000820}, + {0x0000a530, 0x3e02222c, 0x3e02222c, 0x29000822, 0x29000822}, + {0x0000a534, 0x4202242a, 0x4202242a, 0x2d000824, 0x2d000824}, + {0x0000a538, 0x4702244a, 0x4702244a, 0x30000828, 0x30000828}, + {0x0000a53c, 0x4b02244c, 0x4b02244c, 0x3400082a, 0x3400082a}, + {0x0000a540, 0x4e02246c, 0x4e02246c, 0x38000849, 0x38000849}, + {0x0000a544, 0x5302266c, 0x5302266c, 0x3b000a2c, 0x3b000a2c}, + {0x0000a548, 0x5702286c, 0x5702286c, 0x3e000e2b, 0x3e000e2b}, + {0x0000a54c, 0x5c02486b, 0x5c02486b, 0x42000e2d, 0x42000e2d}, + {0x0000a550, 0x61024a6c, 0x61024a6c, 0x4500124a, 0x4500124a}, + {0x0000a554, 0x66026a6c, 0x66026a6c, 0x4900124c, 0x4900124c}, + {0x0000a558, 0x6b026e6c, 0x6b026e6c, 0x4c00126c, 0x4c00126c}, + {0x0000a55c, 0x7002708c, 0x7002708c, 0x4f00128c, 0x4f00128c}, + {0x0000a560, 0x7302b08a, 0x7302b08a, 0x52001290, 0x52001290}, + {0x0000a564, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a568, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a56c, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a570, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a574, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a578, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a57c, 0x7702b08c, 0x7702b08c, 0x56001292, 0x56001292}, + {0x0000a580, 0x00800000, 0x00800000, 0x00800000, 0x00800000}, + {0x0000a584, 0x06800003, 0x06800003, 0x02800001, 0x02800001}, + {0x0000a588, 0x0a800020, 0x0a800020, 0x05800003, 0x05800003}, + {0x0000a58c, 0x10800023, 0x10800023, 0x0a800005, 0x0a800005}, + {0x0000a590, 0x16800220, 0x16800220, 0x0e800201, 0x0e800201}, + {0x0000a594, 0x1c800223, 0x1c800223, 0x11800203, 0x11800203}, + {0x0000a598, 0x21820220, 0x21820220, 0x14800401, 0x14800401}, + {0x0000a59c, 0x27820223, 0x27820223, 0x18800403, 0x18800403}, + {0x0000a5a0, 0x2b822220, 0x2b822220, 0x1b800602, 0x1b800602}, + {0x0000a5a4, 0x2f822222, 0x2f822222, 0x1f800802, 0x1f800802}, + {0x0000a5a8, 0x34822225, 0x34822225, 0x21800620, 0x21800620}, + {0x0000a5ac, 0x3a82222a, 0x3a82222a, 0x25800820, 0x25800820}, + {0x0000a5b0, 0x3e82222c, 0x3e82222c, 0x29800822, 0x29800822}, + {0x0000a5b4, 0x4282242a, 0x4282242a, 0x2d800824, 0x2d800824}, + {0x0000a5b8, 0x4782244a, 0x4782244a, 0x30800828, 0x30800828}, + {0x0000a5bc, 0x4b82244c, 0x4b82244c, 0x3480082a, 0x3480082a}, + {0x0000a5c0, 0x4e82246c, 0x4e82246c, 0x38800849, 0x38800849}, + {0x0000a5c4, 0x5382266c, 0x5382266c, 0x3b800a2c, 0x3b800a2c}, + {0x0000a5c8, 0x5782286c, 0x5782286c, 0x3e800e2b, 0x3e800e2b}, + {0x0000a5cc, 0x5c84286b, 0x5c84286b, 0x42800e2d, 0x42800e2d}, + {0x0000a5d0, 0x61842a6c, 0x61842a6c, 0x4580124a, 0x4580124a}, + {0x0000a5d4, 0x66862a6c, 0x66862a6c, 0x4980124c, 0x4980124c}, + {0x0000a5d8, 0x6b862e6c, 0x6b862e6c, 0x4c80126c, 0x4c80126c}, + {0x0000a5dc, 0x7086308c, 0x7086308c, 0x4f80128c, 0x4f80128c}, + {0x0000a5e0, 0x738a308a, 0x738a308a, 0x52801290, 0x52801290}, + {0x0000a5e4, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5e8, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5ec, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5f0, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5f4, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5f8, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a5fc, 0x778a308c, 0x778a308c, 0x56801292, 0x56801292}, + {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a608, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a60c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a610, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a614, 0x01404000, 0x01404000, 0x01404501, 0x01404501}, + {0x0000a618, 0x01404501, 0x01404501, 0x01404501, 0x01404501}, + {0x0000a61c, 0x02008802, 0x02008802, 0x01404501, 0x01404501}, + {0x0000a620, 0x0300cc03, 0x0300cc03, 0x03c0cf02, 0x03c0cf02}, + {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03c0cf03, 0x03c0cf03}, + {0x0000a628, 0x0300cc03, 0x0300cc03, 0x04011004, 0x04011004}, + {0x0000a62c, 0x03810c03, 0x03810c03, 0x05419405, 0x05419405}, + {0x0000a630, 0x03810e04, 0x03810e04, 0x05419506, 0x05419506}, + {0x0000a634, 0x03810e04, 0x03810e04, 0x05419506, 0x05419506}, + {0x0000a638, 0x03810e04, 0x03810e04, 0x05419506, 0x05419506}, + {0x0000a63c, 0x03810e04, 0x03810e04, 0x05419506, 0x05419506}, + {0x0000b2dc, 0x0380c7fc, 0x0380c7fc, 0x03eaac5a, 0x03eaac5a}, + {0x0000b2e0, 0x0000f800, 0x0000f800, 0x03f330ac, 0x03f330ac}, + {0x0000b2e4, 0x03ff0000, 0x03ff0000, 0x03fc3f00, 0x03fc3f00}, + {0x0000b2e8, 0x00000000, 0x00000000, 0x03ffc000, 0x03ffc000}, + {0x00016044, 0x022492db, 0x022492db, 0x022492db, 0x022492db}, + {0x00016048, 0x24925666, 0x24925666, 0x24925266, 0x24925266}, + {0x00016280, 0x01000015, 0x01000015, 0x01001015, 0x01001015}, + {0x00016288, 0xf0318000, 0xf0318000, 0xf0318000, 0xf0318000}, + {0x00016444, 0x022492db, 0x022492db, 0x022492db, 0x022492db}, + {0x00016448, 0x24925666, 0x24925666, 0x24925266, 0x24925266}, +}; + static const u32 ar9340_1p0_mac_core[][2] = { /* Addr allmodes */ {0x00000008, 0x00000000}, diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h index a3710f3bb90c..712f415b8c08 100644 --- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h @@ -260,6 +260,79 @@ static const u32 ar9485Modes_high_power_tx_gain_1_1[][5] = { {0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260}, }; +static const u32 ar9485Modes_green_ob_db_tx_gain_1_1[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x000098bc, 0x00000003, 0x00000003, 0x00000003, 0x00000003}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8}, + {0x0000a458, 0x80000000, 0x80000000, 0x80000000, 0x80000000}, + {0x0000a500, 0x00022200, 0x00022200, 0x00000006, 0x00000006}, + {0x0000a504, 0x05062002, 0x05062002, 0x03000201, 0x03000201}, + {0x0000a508, 0x0c002e00, 0x0c002e00, 0x06000203, 0x06000203}, + {0x0000a50c, 0x11062202, 0x11062202, 0x0a000401, 0x0a000401}, + {0x0000a510, 0x17022e00, 0x17022e00, 0x0e000403, 0x0e000403}, + {0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x12000405, 0x12000405}, + {0x0000a518, 0x25020ec0, 0x25020ec0, 0x15000604, 0x15000604}, + {0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x18000605, 0x18000605}, + {0x0000a520, 0x2f001f04, 0x2f001f04, 0x1c000a04, 0x1c000a04}, + {0x0000a524, 0x35001fc4, 0x35001fc4, 0x21000a06, 0x21000a06}, + {0x0000a528, 0x3c022f04, 0x3c022f04, 0x29000a24, 0x29000a24}, + {0x0000a52c, 0x41023e85, 0x41023e85, 0x2f000e21, 0x2f000e21}, + {0x0000a530, 0x48023ec6, 0x48023ec6, 0x31000e20, 0x31000e20}, + {0x0000a534, 0x4d023f01, 0x4d023f01, 0x33000e20, 0x33000e20}, + {0x0000a538, 0x53023f4b, 0x53023f4b, 0x43000e62, 0x43000e62}, + {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x45000e63, 0x45000e63}, + {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x49000e65, 0x49000e65}, + {0x0000a544, 0x6502feca, 0x6502feca, 0x4b000e66, 0x4b000e66}, + {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x4d001645, 0x4d001645}, + {0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865}, + {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86}, + {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9}, + {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb}, + {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb}, + {0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb}, + {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000b500, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b504, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b508, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b50c, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b510, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b514, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b518, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b51c, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b520, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b524, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b528, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b52c, 0x0000002a, 0x0000002a, 0x0000002a, 0x0000002a}, + {0x0000b530, 0x0000003a, 0x0000003a, 0x0000003a, 0x0000003a}, + {0x0000b534, 0x0000004a, 0x0000004a, 0x0000004a, 0x0000004a}, + {0x0000b538, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b53c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b540, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b544, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b548, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b54c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b550, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b554, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b558, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b55c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b560, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b564, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b568, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b56c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b570, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b574, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b578, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b57c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x00016044, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db}, + {0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260}, +}; + static const u32 ar9485Modes_high_ob_db_tx_gain_1_1[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ {0x000098bc, 0x00000002, 0x00000002, 0x00000002, 0x00000002}, @@ -450,6 +523,79 @@ static const u32 ar9485Modes_low_ob_db_tx_gain_1_1[][5] = { #define ar9485_modes_lowest_ob_db_tx_gain_1_1 ar9485Modes_low_ob_db_tx_gain_1_1 +static const u32 ar9485Modes_green_spur_ob_db_tx_gain_1_1[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x000098bc, 0x00000003, 0x00000003, 0x00000003, 0x00000003}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8}, + {0x0000a458, 0x80000000, 0x80000000, 0x80000000, 0x80000000}, + {0x0000a500, 0x00022200, 0x00022200, 0x00000006, 0x00000006}, + {0x0000a504, 0x05062002, 0x05062002, 0x03000201, 0x03000201}, + {0x0000a508, 0x0c002e00, 0x0c002e00, 0x07000203, 0x07000203}, + {0x0000a50c, 0x11062202, 0x11062202, 0x0a000401, 0x0a000401}, + {0x0000a510, 0x17022e00, 0x17022e00, 0x0e000403, 0x0e000403}, + {0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x12000405, 0x12000405}, + {0x0000a518, 0x25020ec0, 0x25020ec0, 0x14000406, 0x14000406}, + {0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1800040a, 0x1800040a}, + {0x0000a520, 0x2f001f04, 0x2f001f04, 0x1c000460, 0x1c000460}, + {0x0000a524, 0x35001fc4, 0x35001fc4, 0x22000463, 0x22000463}, + {0x0000a528, 0x3c022f04, 0x3c022f04, 0x26000465, 0x26000465}, + {0x0000a52c, 0x41023e85, 0x41023e85, 0x2e0006e0, 0x2e0006e0}, + {0x0000a530, 0x48023ec6, 0x48023ec6, 0x310006e0, 0x310006e0}, + {0x0000a534, 0x4d023f01, 0x4d023f01, 0x330006e0, 0x330006e0}, + {0x0000a538, 0x53023f4b, 0x53023f4b, 0x3e0008e3, 0x3e0008e3}, + {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x410008e5, 0x410008e5}, + {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x430008e6, 0x430008e6}, + {0x0000a544, 0x6502feca, 0x6502feca, 0x4a0008ec, 0x4a0008ec}, + {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x4e0008f1, 0x4e0008f1}, + {0x0000a54c, 0x7203feca, 0x7203feca, 0x520008f3, 0x520008f3}, + {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x54000eed, 0x54000eed}, + {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x58000ef1, 0x58000ef1}, + {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5c000ef3, 0x5c000ef3}, + {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x60000ef5, 0x60000ef5}, + {0x0000a560, 0x900fff0b, 0x900fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a564, 0x960fffcb, 0x960fffcb, 0x62000ef6, 0x62000ef6}, + {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000b500, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b504, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b508, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b50c, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b510, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b514, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b518, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b51c, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b520, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b524, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b528, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, + {0x0000b52c, 0x0000002a, 0x0000002a, 0x0000002a, 0x0000002a}, + {0x0000b530, 0x0000003a, 0x0000003a, 0x0000003a, 0x0000003a}, + {0x0000b534, 0x0000004a, 0x0000004a, 0x0000004a, 0x0000004a}, + {0x0000b538, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b53c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b540, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b544, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b548, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b54c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b550, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b554, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b558, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b55c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b560, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b564, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b568, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b56c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b570, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b574, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b578, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x0000b57c, 0x0000005b, 0x0000005b, 0x0000005b, 0x0000005b}, + {0x00016044, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db}, + {0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260}, +}; + static const u32 ar9485_1_1[][2] = { /* Addr allmodes */ {0x0000a580, 0x00000000}, diff --git a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h index 6e1915aee712..28fd99203f64 100644 --- a/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9580_1p0_initvals.h @@ -685,6 +685,82 @@ static const u32 ar9580_1p0_mixed_ob_db_tx_gain_table[][5] = { #define ar9580_1p0_high_ob_db_tx_gain_table ar9300Modes_high_ob_db_tx_gain_table_2p2 +#define ar9580_1p0_type5_tx_gain_table ar9300Modes_type5_tx_gain_table_2p2 + +static const u32 ar9580_1p0_type6_tx_gain_table[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x0000a2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000a2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000a2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000a2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, + {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, + {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, + {0x0000a50c, 0x10000023, 0x10000023, 0x0b000200, 0x0b000200}, + {0x0000a510, 0x15000028, 0x15000028, 0x0f000202, 0x0f000202}, + {0x0000a514, 0x1b00002b, 0x1b00002b, 0x12000400, 0x12000400}, + {0x0000a518, 0x1f020028, 0x1f020028, 0x16000402, 0x16000402}, + {0x0000a51c, 0x2502002b, 0x2502002b, 0x19000404, 0x19000404}, + {0x0000a520, 0x2a04002a, 0x2a04002a, 0x1c000603, 0x1c000603}, + {0x0000a524, 0x2e06002a, 0x2e06002a, 0x21000a02, 0x21000a02}, + {0x0000a528, 0x3302202d, 0x3302202d, 0x25000a04, 0x25000a04}, + {0x0000a52c, 0x3804202c, 0x3804202c, 0x28000a20, 0x28000a20}, + {0x0000a530, 0x3c06202c, 0x3c06202c, 0x2c000e20, 0x2c000e20}, + {0x0000a534, 0x4108202d, 0x4108202d, 0x30000e22, 0x30000e22}, + {0x0000a538, 0x4506402d, 0x4506402d, 0x34000e24, 0x34000e24}, + {0x0000a53c, 0x4906222d, 0x4906222d, 0x38001640, 0x38001640}, + {0x0000a540, 0x4d062231, 0x4d062231, 0x3c001660, 0x3c001660}, + {0x0000a544, 0x50082231, 0x50082231, 0x3f001861, 0x3f001861}, + {0x0000a548, 0x5608422e, 0x5608422e, 0x43001a81, 0x43001a81}, + {0x0000a54c, 0x5e08442e, 0x5e08442e, 0x47001a83, 0x47001a83}, + {0x0000a550, 0x620a4431, 0x620a4431, 0x4a001c84, 0x4a001c84}, + {0x0000a554, 0x640a4432, 0x640a4432, 0x4e001ce3, 0x4e001ce3}, + {0x0000a558, 0x680a4434, 0x680a4434, 0x52001ce5, 0x52001ce5}, + {0x0000a55c, 0x6c0a6434, 0x6c0a6434, 0x56001ce9, 0x56001ce9}, + {0x0000a560, 0x6f0a6633, 0x6f0a6633, 0x5a001ceb, 0x5a001ceb}, + {0x0000a564, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a568, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a56c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a570, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a574, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a578, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a57c, 0x730c6634, 0x730c6634, 0x5d001eec, 0x5d001eec}, + {0x0000a600, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a604, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a608, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a60c, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a610, 0x01804601, 0x01804601, 0x00000000, 0x00000000}, + {0x0000a614, 0x01804601, 0x01804601, 0x01404000, 0x01404000}, + {0x0000a618, 0x01804601, 0x01804601, 0x01404501, 0x01404501}, + {0x0000a61c, 0x01804601, 0x01804601, 0x02008501, 0x02008501}, + {0x0000a620, 0x03408d02, 0x03408d02, 0x0280ca03, 0x0280ca03}, + {0x0000a624, 0x0300cc03, 0x0300cc03, 0x03010c04, 0x03010c04}, + {0x0000a628, 0x03410d04, 0x03410d04, 0x04014c04, 0x04014c04}, + {0x0000a62c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a630, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a634, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a638, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000a63c, 0x03410d04, 0x03410d04, 0x04015005, 0x04015005}, + {0x0000b2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000b2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000b2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000b2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x0000c2dc, 0x000cfff0, 0x000cfff0, 0x03aaa352, 0x03aaa352}, + {0x0000c2e0, 0x000f0000, 0x000f0000, 0x03ccc584, 0x03ccc584}, + {0x0000c2e4, 0x03f00000, 0x03f00000, 0x03f0f800, 0x03f0f800}, + {0x0000c2e8, 0x00000000, 0x00000000, 0x03ff0000, 0x03ff0000}, + {0x00016044, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016048, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016444, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016448, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016468, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, + {0x00016844, 0x012492d4, 0x012492d4, 0x012492d4, 0x012492d4}, + {0x00016848, 0x61200001, 0x61200001, 0x66480001, 0x66480001}, + {0x00016868, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, +}; + static const u32 ar9580_1p0_soc_preamble[][2] = { /* Addr allmodes */ {0x000040a4, 0x00a0c1c9}, diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h index 0ac205e4cd04..5929850649f0 100644 --- a/drivers/net/wireless/ath/ath9k/reg.h +++ b/drivers/net/wireless/ath/ath9k/reg.h @@ -789,6 +789,7 @@ #define AR_SREV_REVISION_9271_11 1 #define AR_SREV_VERSION_9300 0x1c0 #define AR_SREV_REVISION_9300_20 2 /* 2.0 and 2.1 */ +#define AR_SREV_REVISION_9300_22 3 #define AR_SREV_VERSION_9330 0x200 #define AR_SREV_REVISION_9330_10 0 #define AR_SREV_REVISION_9330_11 1 @@ -869,6 +870,9 @@ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9300)) #define AR_SREV_9300_20_OR_LATER(_ah) \ ((_ah)->hw_version.macVersion >= AR_SREV_VERSION_9300) +#define AR_SREV_9300_22(_ah) \ + (AR_SREV_9300(ah) && \ + ((_ah)->hw_version.macRev == AR_SREV_REVISION_9300_22)) #define AR_SREV_9330(_ah) \ (((_ah)->hw_version.macVersion == AR_SREV_VERSION_9330)) -- cgit v1.2.3 From 990debe2ca8379863709721926550a55f47f3880 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Thu, 10 Jan 2013 22:24:03 -0800 Subject: bcma: update pci configuration for bcm4706/bcm4716 Update the PCI configuration for BCM4706 and BCM4716 per the 2011 Broadcom SDK. Signed-off-by: Nathan Hintz Signed-off-by: John W. Linville --- drivers/bcma/driver_pci_host.c | 13 ++++++++++++- include/linux/bcma/bcma_driver_pci.h | 2 ++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index ef9f0938da77..37d1777dcd47 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -427,7 +427,7 @@ void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) /* Reset RC */ usleep_range(3000, 5000); pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); - usleep_range(1000, 2000); + msleep(50); pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | BCMA_CORE_PCI_CTL_RST_OE); @@ -489,6 +489,17 @@ void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) bcma_core_pci_enable_crs(pc); + if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706 || + bus->chipinfo.id == BCMA_CHIP_ID_BCM4716) { + u16 val16; + bcma_extpci_read_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, + &val16, sizeof(val16)); + val16 |= (2 << 5); /* Max payload size of 512 */ + val16 |= (2 << 12); /* MRRS 512 */ + bcma_extpci_write_config(pc, 0, 0, BCMA_CORE_PCI_CFG_DEVCTRL, + &val16, sizeof(val16)); + } + /* Enable PCI bridge BAR0 memory & master access */ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 41da581e1612..31232247a1ee 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -179,6 +179,8 @@ struct pci_dev; #define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ #define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ +#define BCMA_CORE_PCI_CFG_DEVCTRL 0xd8 + /* PCIE Root Capability Register bits (Host mode only) */ #define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 -- cgit v1.2.3 From 858ce0220922a52e009d17dcaaab5dfd76f9833b Mon Sep 17 00:00:00 2001 From: Thierry Escande Date: Sat, 12 Jan 2013 19:37:12 +0100 Subject: NFC: pn533: Fix bad allocation size Use dereferenced pointer in sizeof instead of pointer itself. Signed-off-by: Thierry Escande Signed-off-by: Samuel Ortiz --- drivers/nfc/pn533.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nfc/pn533.c b/drivers/nfc/pn533.c index f1702f945701..f696318cfb51 100644 --- a/drivers/nfc/pn533.c +++ b/drivers/nfc/pn533.c @@ -743,7 +743,7 @@ static int __pn533_send_async(struct pn533 *dev, u8 cmd_code, nfc_dev_dbg(&dev->interface->dev, "Sending command 0x%x", cmd_code); - arg = kzalloc(sizeof(arg), GFP_KERNEL); + arg = kzalloc(sizeof(*arg), GFP_KERNEL); if (!arg) return -ENOMEM; @@ -863,7 +863,7 @@ static int pn533_send_cmd_direct_async(struct pn533 *dev, u8 cmd_code, if (!resp) return -ENOMEM; - arg = kzalloc(sizeof(arg), GFP_KERNEL); + arg = kzalloc(sizeof(*arg), GFP_KERNEL); if (!arg) { dev_kfree_skb(resp); return -ENOMEM; -- cgit v1.2.3 From 0c0280bd0ba410326eecdaeb1b936696eda6381d Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Fri, 11 Jan 2013 18:39:36 +0000 Subject: wireless: make the reg_notifier() void The reg_notifier()'s return value need not be checked as it is only supposed to do post regulatory work and that should never fail. Any behaviour to regulatory that needs to be considered before cfg80211 does work to a driver should be specified by using the already existing flags, the reg_notifier() just does post processing should it find it needs to. Also make lbs_reg_notifier static. Signed-off-by: Luis R. Rodriguez [move lbs_reg_notifier to not break compile] Signed-off-by: Johannes Berg --- drivers/net/wireless/ath/ath5k/base.c | 5 ++-- drivers/net/wireless/ath/ath6kl/cfg80211.c | 16 ++++------- drivers/net/wireless/ath/ath9k/htc_drv_init.c | 8 +++--- drivers/net/wireless/ath/ath9k/init.c | 9 +++---- drivers/net/wireless/ath/carl9170/main.c | 6 ++--- drivers/net/wireless/ath/regd.c | 18 ++++++------- drivers/net/wireless/ath/regd.h | 10 +++---- drivers/net/wireless/brcm80211/brcmsmac/channel.c | 6 ++--- drivers/net/wireless/libertas/cfg.c | 33 +++++++++++------------ drivers/net/wireless/libertas/cfg.h | 3 --- drivers/net/wireless/mwifiex/cfg80211.c | 6 ++--- drivers/net/wireless/rtlwifi/regd.c | 20 +++++++------- drivers/net/wireless/rtlwifi/regd.h | 6 ++--- drivers/net/wireless/ti/wlcore/main.c | 6 ++--- include/net/cfg80211.h | 4 +-- 15 files changed, 66 insertions(+), 90 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 30ca0a60a64c..1d264c0f5a9b 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -240,13 +240,14 @@ static const struct ath_ops ath5k_common_ops = { * Driver Initialization * \***********************/ -static int ath5k_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) +static void ath5k_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct ath5k_hw *ah = hw->priv; struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah); - return ath_reg_notifier_apply(wiphy, request, regulatory); + ath_reg_notifier_apply(wiphy, request, regulatory); } /********************\ diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 5516a8ccc3c6..4225cca0f198 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -3492,8 +3492,8 @@ void ath6kl_cfg80211_stop_all(struct ath6kl *ar) ath6kl_cfg80211_stop(vif); } -static int ath6kl_cfg80211_reg_notify(struct wiphy *wiphy, - struct regulatory_request *request) +static void ath6kl_cfg80211_reg_notify(struct wiphy *wiphy, + struct regulatory_request *request) { struct ath6kl *ar = wiphy_priv(wiphy); u32 rates[IEEE80211_NUM_BANDS]; @@ -3506,17 +3506,13 @@ static int ath6kl_cfg80211_reg_notify(struct wiphy *wiphy, request->processed ? " processed" : "", request->initiator, request->user_reg_hint_type); - /* - * As firmware is not able intersect regdoms, we can only listen to - * cellular hints. - */ if (request->user_reg_hint_type != NL80211_USER_REG_HINT_CELL_BASE) - return -EOPNOTSUPP; + return; ret = ath6kl_wmi_set_regdomain_cmd(ar->wmi, request->alpha2); if (ret) { ath6kl_err("failed to set regdomain: %d\n", ret); - return ret; + return; } /* @@ -3536,10 +3532,8 @@ static int ath6kl_cfg80211_reg_notify(struct wiphy *wiphy, if (ret) { ath6kl_err("failed to start scan for a regdomain change: %d\n", ret); - return ret; + return; } - - return 0; } static int ath6kl_cfg80211_vif_init(struct ath6kl_vif *vif) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index 05d5ba66cac3..e5d7958ab948 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -280,14 +280,14 @@ err: return ret; } -static int ath9k_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) +static void ath9k_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct ath9k_htc_priv *priv = hw->priv; - return ath_reg_notifier_apply(wiphy, request, - ath9k_hw_regulatory(priv->ah)); + ath_reg_notifier_apply(wiphy, request, + ath9k_hw_regulatory(priv->ah)); } static unsigned int ath9k_regread(void *hw_priv, u32 reg_offset) diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index f69ef5d48c7b..315d6593e18e 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -302,16 +302,15 @@ static void setup_ht_cap(struct ath_softc *sc, ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED; } -static int ath9k_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) +static void ath9k_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct ath_softc *sc = hw->priv; struct ath_hw *ah = sc->sc_ah; struct ath_regulatory *reg = ath9k_hw_regulatory(ah); - int ret; - ret = ath_reg_notifier_apply(wiphy, request, reg); + ath_reg_notifier_apply(wiphy, request, reg); /* Set tx power */ if (ah->curchan) { @@ -321,8 +320,6 @@ static int ath9k_reg_notifier(struct wiphy *wiphy, sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit; ath9k_ps_restore(sc); } - - return ret; } /* diff --git a/drivers/net/wireless/ath/carl9170/main.c b/drivers/net/wireless/ath/carl9170/main.c index 9d2051aeb782..aaa2699e5a8c 100644 --- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1918,13 +1918,13 @@ static int carl9170_parse_eeprom(struct ar9170 *ar) return 0; } -static int carl9170_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) +static void carl9170_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct ar9170 *ar = hw->priv; - return ath_reg_notifier_apply(wiphy, request, &ar->common.regulatory); + ath_reg_notifier_apply(wiphy, request, &ar->common.regulatory); } int carl9170_register(struct ar9170 *ar) diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c index 7a6c79e1f819..ccc4c718f124 100644 --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -356,9 +356,9 @@ static u16 ath_regd_find_country_by_name(char *alpha2) return -1; } -int ath_reg_notifier_apply(struct wiphy *wiphy, - struct regulatory_request *request, - struct ath_regulatory *reg) +void ath_reg_notifier_apply(struct wiphy *wiphy, + struct regulatory_request *request, + struct ath_regulatory *reg) { struct ath_common *common = container_of(reg, struct ath_common, regulatory); @@ -373,7 +373,7 @@ int ath_reg_notifier_apply(struct wiphy *wiphy, * any pending requests in the queue. */ if (!request) - return 0; + return; switch (request->initiator) { case NL80211_REGDOM_SET_BY_CORE: @@ -409,8 +409,6 @@ int ath_reg_notifier_apply(struct wiphy *wiphy, break; } - - return 0; } EXPORT_SYMBOL(ath_reg_notifier_apply); @@ -500,8 +498,8 @@ ath_get_regpair(int regdmn) static int ath_regd_init_wiphy(struct ath_regulatory *reg, struct wiphy *wiphy, - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request)) + void (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request)) { const struct ieee80211_regdomain *regd; @@ -621,8 +619,8 @@ static int __ath_regd_init(struct ath_regulatory *reg) int ath_regd_init(struct ath_regulatory *reg, struct wiphy *wiphy, - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request)) + void (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request)) { struct ath_common *common = container_of(reg, struct ath_common, regulatory); diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h index 03a8268ccf21..37f53bd8fcb1 100644 --- a/drivers/net/wireless/ath/regd.h +++ b/drivers/net/wireless/ath/regd.h @@ -252,12 +252,12 @@ enum CountryCode { bool ath_is_world_regd(struct ath_regulatory *reg); bool ath_is_49ghz_allowed(u16 redomain); int ath_regd_init(struct ath_regulatory *reg, struct wiphy *wiphy, - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request)); + void (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request)); u32 ath_regd_get_band_ctl(struct ath_regulatory *reg, enum ieee80211_band band); -int ath_reg_notifier_apply(struct wiphy *wiphy, - struct regulatory_request *request, - struct ath_regulatory *reg); +void ath_reg_notifier_apply(struct wiphy *wiphy, + struct regulatory_request *request, + struct ath_regulatory *reg); #endif diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 4eb3f0d52105..cdb62b8ccc79 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -702,8 +702,8 @@ brcms_reg_apply_beaconing_flags(struct wiphy *wiphy, } } -static int brcms_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) +static void brcms_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct brcms_info *wl = hw->priv; @@ -744,8 +744,6 @@ static int brcms_reg_notifier(struct wiphy *wiphy, if (wlc->pub->_nbands > 1 || wlc->band->bandtype == BRCM_BAND_2G) wlc_phy_chanspec_ch14_widefilter_set(wlc->band->pi, brcms_c_japan_ccode(request->alpha2)); - - return 0; } void brcms_c_regd_init(struct brcms_c_info *wlc) diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index ec6d5d6b452e..230f8ebbe289 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -2132,6 +2132,21 @@ static void lbs_cfg_set_regulatory_hint(struct lbs_private *priv) lbs_deb_leave(LBS_DEB_CFG80211); } +static void lbs_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) +{ + struct lbs_private *priv = wiphy_priv(wiphy); + + lbs_deb_enter_args(LBS_DEB_CFG80211, "cfg80211 regulatory domain " + "callback for domain %c%c\n", request->alpha2[0], + request->alpha2[1]); + + memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2)); + if (lbs_iface_active(priv)) + lbs_set_11d_domain_info(priv); + + lbs_deb_leave(LBS_DEB_CFG80211); +} /* * This function get's called after lbs_setup_firmware() determined the @@ -2184,24 +2199,6 @@ int lbs_cfg_register(struct lbs_private *priv) return ret; } -int lbs_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) -{ - struct lbs_private *priv = wiphy_priv(wiphy); - int ret = 0; - - lbs_deb_enter_args(LBS_DEB_CFG80211, "cfg80211 regulatory domain " - "callback for domain %c%c\n", request->alpha2[0], - request->alpha2[1]); - - memcpy(priv->country_code, request->alpha2, sizeof(request->alpha2)); - if (lbs_iface_active(priv)) - ret = lbs_set_11d_domain_info(priv); - - lbs_deb_leave(LBS_DEB_CFG80211); - return ret; -} - void lbs_scan_deinit(struct lbs_private *priv) { lbs_deb_enter(LBS_DEB_CFG80211); diff --git a/drivers/net/wireless/libertas/cfg.h b/drivers/net/wireless/libertas/cfg.h index 558168ce634d..10995f59fe34 100644 --- a/drivers/net/wireless/libertas/cfg.h +++ b/drivers/net/wireless/libertas/cfg.h @@ -10,9 +10,6 @@ struct wireless_dev *lbs_cfg_alloc(struct device *dev); int lbs_cfg_register(struct lbs_private *priv); void lbs_cfg_free(struct lbs_private *priv); -int lbs_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request); - void lbs_send_disconnect_notification(struct lbs_private *priv); void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event); diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index a875499f8945..a838ddecd91a 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -519,8 +519,8 @@ static int mwifiex_send_domain_info_cmd_fw(struct wiphy *wiphy) * - Set by user * - Set bt Country IE */ -static int mwifiex_reg_notifier(struct wiphy *wiphy, - struct regulatory_request *request) +static void mwifiex_reg_notifier(struct wiphy *wiphy, + struct regulatory_request *request) { struct mwifiex_adapter *adapter = mwifiex_cfg80211_get_adapter(wiphy); @@ -540,8 +540,6 @@ static int mwifiex_reg_notifier(struct wiphy *wiphy, break; } mwifiex_send_domain_info_cmd_fw(wiphy); - - return 0; } /* diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c index 7e3ead774fb9..d7d0d4948b01 100644 --- a/drivers/net/wireless/rtlwifi/regd.c +++ b/drivers/net/wireless/rtlwifi/regd.c @@ -298,9 +298,9 @@ static void _rtl_reg_apply_world_flags(struct wiphy *wiphy, return; } -static int _rtl_reg_notifier_apply(struct wiphy *wiphy, - struct regulatory_request *request, - struct rtl_regulatory *reg) +static void _rtl_reg_notifier_apply(struct wiphy *wiphy, + struct regulatory_request *request, + struct rtl_regulatory *reg) { /* We always apply this */ _rtl_reg_apply_radar_flags(wiphy); @@ -314,8 +314,6 @@ static int _rtl_reg_notifier_apply(struct wiphy *wiphy, _rtl_reg_apply_world_flags(wiphy, request->initiator, reg); break; } - - return 0; } static const struct ieee80211_regdomain *_rtl_regdomain_select( @@ -348,9 +346,9 @@ static const struct ieee80211_regdomain *_rtl_regdomain_select( static int _rtl_regd_init_wiphy(struct rtl_regulatory *reg, struct wiphy *wiphy, - int (*reg_notifier) (struct wiphy *wiphy, - struct regulatory_request * - request)) + void (*reg_notifier) (struct wiphy *wiphy, + struct regulatory_request * + request)) { const struct ieee80211_regdomain *regd; @@ -379,7 +377,7 @@ static struct country_code_to_enum_rd *_rtl_regd_find_country(u16 countrycode) } int rtl_regd_init(struct ieee80211_hw *hw, - int (*reg_notifier) (struct wiphy *wiphy, + void (*reg_notifier) (struct wiphy *wiphy, struct regulatory_request *request)) { struct rtl_priv *rtlpriv = rtl_priv(hw); @@ -421,12 +419,12 @@ int rtl_regd_init(struct ieee80211_hw *hw, return 0; } -int rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) +void rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) { struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct rtl_priv *rtlpriv = rtl_priv(hw); RT_TRACE(rtlpriv, COMP_REGD, DBG_LOUD, "\n"); - return _rtl_reg_notifier_apply(wiphy, request, &rtlpriv->regd); + _rtl_reg_notifier_apply(wiphy, request, &rtlpriv->regd); } diff --git a/drivers/net/wireless/rtlwifi/regd.h b/drivers/net/wireless/rtlwifi/regd.h index 70ef2f418a44..4e1f4f00e6e9 100644 --- a/drivers/net/wireless/rtlwifi/regd.h +++ b/drivers/net/wireless/rtlwifi/regd.h @@ -55,7 +55,7 @@ enum country_code_type_t { }; int rtl_regd_init(struct ieee80211_hw *hw, - int (*reg_notifier) (struct wiphy *wiphy, - struct regulatory_request *request)); -int rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request); + void (*reg_notifier) (struct wiphy *wiphy, + struct regulatory_request *request)); +void rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request); #endif diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index d7de06359ae1..ce6e62a37e14 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -89,8 +89,8 @@ static int wl12xx_set_authorized(struct wl1271 *wl, return 0; } -static int wl1271_reg_notify(struct wiphy *wiphy, - struct regulatory_request *request) +static void wl1271_reg_notify(struct wiphy *wiphy, + struct regulatory_request *request) { struct ieee80211_supported_band *band; struct ieee80211_channel *ch; @@ -107,8 +107,6 @@ static int wl1271_reg_notify(struct wiphy *wiphy, IEEE80211_CHAN_PASSIVE_SCAN; } - - return 0; } static int wl1271_set_rx_streaming(struct wl1271 *wl, struct wl12xx_vif *wlvif, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e5f085c89221..4275127da05a 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2364,8 +2364,8 @@ struct wiphy { struct ieee80211_supported_band *bands[IEEE80211_NUM_BANDS]; /* Lets us get back the wiphy on the callback */ - int (*reg_notifier)(struct wiphy *wiphy, - struct regulatory_request *request); + void (*reg_notifier)(struct wiphy *wiphy, + struct regulatory_request *request); /* fields below are read-only, assigned by cfg80211 */ -- cgit v1.2.3 From d3710e74cf329839dea8d13b1ad56e572b06b173 Mon Sep 17 00:00:00 2001 From: Lauro Ramos Venancio Date: Wed, 5 Dec 2012 21:12:25 -0300 Subject: NFC: Change nfc.h license nfc.h being GPL makes it quite controversial for non GPL applications to include it. Moreover, nfc.h only includes structures and API definitions that are hardly copyrightable. Signed-off-by: Lauro Ramos Venancio Signed-off-by: Samuel Ortiz --- include/uapi/linux/nfc.h | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index 80e4ecd8c04c..7969f46f1bb3 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -5,20 +5,17 @@ * Lauro Ramos Venancio * Aloisio Almeida Jr * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef __LINUX_NFC_H -- cgit v1.2.3 From 463e3ed3eacc8f47866e5d612bd8ee0bcee5e2f0 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 14 Jan 2013 10:50:15 +0100 Subject: ath9k: remove sc->rx.rxbuflock to fix a deadlock The commit "ath9k: fix rx flush handling" added a deadlock that happens because ath_rx_tasklet is called in a section that has already taken the rx buffer lock. It seems that the only purpose of the rxbuflock was a band-aid fix to the reset vs rx tasklet race, which has been properly fixed in the commit "ath9k: add a better fix for the rx tasklet vs rx flush race". Now that the fix is in, we can safely remove the lock to avoid such issues. Cc: stable@vger.kernel.org Reported-by: Sujith Manoharan Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 1 - drivers/net/wireless/ath/ath9k/recv.c | 13 ------------- 2 files changed, 14 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 32b2d5cd9a5a..42794c546a40 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -317,7 +317,6 @@ struct ath_rx { u32 *rxlink; u32 num_pkts; unsigned int rxfilter; - spinlock_t rxbuflock; struct list_head rxbuf; struct ath_descdma rxdma; struct ath_buf *rx_bufptr; diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c index 67f58d4bb10e..90752f246970 100644 --- a/drivers/net/wireless/ath/ath9k/recv.c +++ b/drivers/net/wireless/ath/ath9k/recv.c @@ -254,8 +254,6 @@ rx_init_fail: static void ath_edma_start_recv(struct ath_softc *sc) { - spin_lock_bh(&sc->rx.rxbuflock); - ath9k_hw_rxena(sc->sc_ah); ath_rx_addbuffer_edma(sc, ATH9K_RX_QUEUE_HP, @@ -267,8 +265,6 @@ static void ath_edma_start_recv(struct ath_softc *sc) ath_opmode_init(sc); ath9k_hw_startpcureceive(sc->sc_ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)); - - spin_unlock_bh(&sc->rx.rxbuflock); } static void ath_edma_stop_recv(struct ath_softc *sc) @@ -285,7 +281,6 @@ int ath_rx_init(struct ath_softc *sc, int nbufs) int error = 0; spin_lock_init(&sc->sc_pcu_lock); - spin_lock_init(&sc->rx.rxbuflock); common->rx_bufsize = IEEE80211_MAX_MPDU_LEN / 2 + sc->sc_ah->caps.rx_status_len; @@ -446,7 +441,6 @@ int ath_startrecv(struct ath_softc *sc) return 0; } - spin_lock_bh(&sc->rx.rxbuflock); if (list_empty(&sc->rx.rxbuf)) goto start_recv; @@ -467,8 +461,6 @@ start_recv: ath_opmode_init(sc); ath9k_hw_startpcureceive(ah, !!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)); - spin_unlock_bh(&sc->rx.rxbuflock); - return 0; } @@ -484,7 +476,6 @@ bool ath_stoprecv(struct ath_softc *sc) struct ath_hw *ah = sc->sc_ah; bool stopped, reset = false; - spin_lock_bh(&sc->rx.rxbuflock); ath9k_hw_abortpcurecv(ah); ath9k_hw_setrxfilter(ah, 0); stopped = ath9k_hw_stopdmarecv(ah, &reset); @@ -495,7 +486,6 @@ bool ath_stoprecv(struct ath_softc *sc) ath_edma_stop_recv(sc); else sc->rx.rxlink = NULL; - spin_unlock_bh(&sc->rx.rxbuflock); if (!(ah->ah_flags & AH_UNPLUGGED) && unlikely(!stopped)) { @@ -1059,7 +1049,6 @@ int ath_rx_tasklet(struct ath_softc *sc, int flush, bool hp) dma_type = DMA_FROM_DEVICE; qtype = hp ? ATH9K_RX_QUEUE_HP : ATH9K_RX_QUEUE_LP; - spin_lock_bh(&sc->rx.rxbuflock); tsf = ath9k_hw_gettsf64(ah); tsf_lower = tsf & 0xffffffff; @@ -1254,8 +1243,6 @@ requeue: } } while (1); - spin_unlock_bh(&sc->rx.rxbuflock); - if (!(ah->imask & ATH9K_INT_RXEOL)) { ah->imask |= (ATH9K_INT_RXEOL | ATH9K_INT_RXORN); ath9k_hw_set_interrupts(ah); -- cgit v1.2.3 From 4668cce527acb3bd048c5e6c99b157a14b214671 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 14 Jan 2013 16:56:46 +0100 Subject: ath9k: disable the tasklet before taking the PCU lock Fixes a reported CPU soft lockup where the tasklet tries to acquire the lock and blocks while ath_prepare_reset (holding the lock) waits for it to complete. Cc: stable@vger.kernel.org Reported-by: Robert Shade Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 9844b758f81d..3796e65c26f1 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -196,16 +196,12 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); - tasklet_disable(&sc->intr_tq); - if (!ath_stoprecv(sc)) ret = false; if (!ath_drain_all_txq(sc, retry_tx)) ret = false; - tasklet_enable(&sc->intr_tq); - return ret; } @@ -262,6 +258,7 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, __ath_cancel_work(sc); + tasklet_disable(&sc->intr_tq); spin_lock_bh(&sc->sc_pcu_lock); if (!(sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) { @@ -296,6 +293,8 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, out: spin_unlock_bh(&sc->sc_pcu_lock); + tasklet_enable(&sc->intr_tq); + return r; } -- cgit v1.2.3 From e2d4a24e03f9f7b255e86a2537dca0927f08af4a Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Sat, 12 Jan 2013 10:28:12 +0800 Subject: ath9k_hw: ar9002_hw_spectral_scan_config() can be static Signed-off-by: Fengguang Wu Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 2cb665e2ea22..f4003512d8d5 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -555,7 +555,7 @@ static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah, REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval); } -void ar9002_hw_spectral_scan_config(struct ath_hw *ah, +static void ar9002_hw_spectral_scan_config(struct ath_hw *ah, struct ath_spec_scan *param) { u8 count; -- cgit v1.2.3 From 6bf2e5461479c4511f59946a7378db576b04dbc5 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Fri, 11 Jan 2013 22:07:22 -0800 Subject: bcma: fix bcm4716/bcm4748 i2s irqflag The default irqflag assignment for the I2S core on some Broadcom 4716/4748 devices is invalid and needs to be corrected (from the Broadcom SDK). Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_mips.c | 28 ++++++++++++++++++++++++++++ include/linux/bcma/bcma_driver_mips.h | 1 + 2 files changed, 29 insertions(+) diff --git a/drivers/bcma/driver_mips.c b/drivers/bcma/driver_mips.c index a808404db4b1..9fe86ee16c66 100644 --- a/drivers/bcma/driver_mips.c +++ b/drivers/bcma/driver_mips.c @@ -256,6 +256,32 @@ void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) mcore->early_setup_done = true; } +static void bcma_fix_i2s_irqflag(struct bcma_bus *bus) +{ + struct bcma_device *cpu, *pcie, *i2s; + + /* Fixup the interrupts in 4716/4748 for i2s core (2010 Broadcom SDK) + * (IRQ flags > 7 are ignored when setting the interrupt masks) + */ + if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4716 && + bus->chipinfo.id != BCMA_CHIP_ID_BCM4748) + return; + + cpu = bcma_find_core(bus, BCMA_CORE_MIPS_74K); + pcie = bcma_find_core(bus, BCMA_CORE_PCIE); + i2s = bcma_find_core(bus, BCMA_CORE_I2S); + if (cpu && pcie && i2s && + bcma_aread32(cpu, BCMA_MIPS_OOBSELINA74) == 0x08060504 && + bcma_aread32(pcie, BCMA_MIPS_OOBSELINA74) == 0x08060504 && + bcma_aread32(i2s, BCMA_MIPS_OOBSELOUTA30) == 0x88) { + bcma_awrite32(cpu, BCMA_MIPS_OOBSELINA74, 0x07060504); + bcma_awrite32(pcie, BCMA_MIPS_OOBSELINA74, 0x07060504); + bcma_awrite32(i2s, BCMA_MIPS_OOBSELOUTA30, 0x87); + bcma_debug(bus, + "Moved i2s interrupt to oob line 7 instead of 8\n"); + } +} + void bcma_core_mips_init(struct bcma_drv_mips *mcore) { struct bcma_bus *bus; @@ -269,6 +295,8 @@ void bcma_core_mips_init(struct bcma_drv_mips *mcore) bcma_core_mips_early_init(mcore); + bcma_fix_i2s_irqflag(bus); + switch (bus->chipinfo.id) { case BCMA_CHIP_ID_BCM4716: case BCMA_CHIP_ID_BCM4748: diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index 73c7f4b882cc..0d1ea297851a 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -28,6 +28,7 @@ #define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 #define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 +#define BCMA_MIPS_OOBSELINA74 0x004 #define BCMA_MIPS_OOBSELOUTA30 0x100 struct bcma_device; -- cgit v1.2.3 From f6734627edea983b307593f71824d7ec2dd2625a Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Sat, 12 Jan 2013 02:46:13 -0800 Subject: bcma: delete duplicate readl The 'val' has already been read by the prior call to 'mips_busprobe32'; this 'readl' is unnecessary. Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_pci_host.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index 37d1777dcd47..cf3dca987257 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -122,8 +122,6 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, val = 0xffffffff; goto unmap; } - - val = readl(mmio); } val >>= (8 * (off & 3)); -- cgit v1.2.3 From a35ab937cb27ec8c00b6f13cade93dc10e22b670 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Sat, 12 Jan 2013 02:46:14 -0800 Subject: bcma: jump to 'out' label for invalid 'func' value Consistently jump to the 'out' label for error conditions (adds missing check for 'func' validity in bcma_extpci_write_config). Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_pci_host.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index cf3dca987257..4a4152389515 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -94,7 +94,7 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, if (dev == 0) { /* we support only two functions on device 0 */ if (func > 1) - return -EINVAL; + goto out; /* accesses to config registers with offsets >= 256 * requires indirect access. @@ -157,6 +157,10 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, if (unlikely(len != 1 && len != 2 && len != 4)) goto out; if (dev == 0) { + /* we support only two functions on device 0 */ + if (func > 1) + goto out; + /* accesses to config registers with offsets >= 256 * requires indirect access. */ -- cgit v1.2.3 From 447d7e25be462329268f279bef2f6faa986a5185 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Sat, 12 Jan 2013 02:46:15 -0800 Subject: bcma: don't map/unmap a subset of the PCI config space For PCI config space access offsets < 256 for device '0', bcma_extpci_write_config performs an 'ioremap_nocache' on a 4 byte section of the PCI config space (an area that has already previously been mapped), and then subsequently unmaps that 4 byte section. This can't be a good thing for future read access from that now unmapped location. Modify the config space writes to use the existing access functions (similar to how it is done for the reads). Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_pci_host.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index 4a4152389515..c0cb0620ab62 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -149,7 +149,7 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, const void *buf, int len) { int err = -EINVAL; - u32 addr = 0, val = 0; + u32 addr, val; void __iomem *mmio = 0; u16 chipid = pc->core->bus->chipinfo.id; @@ -165,12 +165,10 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, * requires indirect access. */ if (off < PCI_CONFIG_SPACE_SIZE) { - addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; + addr = BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); addr |= (off & 0xfc); - mmio = ioremap_nocache(addr, sizeof(val)); - if (!mmio) - goto out; + val = pcicore_read32(pc, addr); } } else { addr = bcma_get_cfgspace_addr(pc, dev, func, off); @@ -189,12 +187,10 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, switch (len) { case 1: - val = readl(mmio); val &= ~(0xFF << (8 * (off & 3))); val |= *((const u8 *)buf) << (8 * (off & 3)); break; case 2: - val = readl(mmio); val &= ~(0xFFFF << (8 * (off & 3))); val |= *((const u16 *)buf) << (8 * (off & 3)); break; @@ -202,13 +198,17 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, val = *((const u32 *)buf); break; } - if (dev == 0 && !addr) { + if (dev == 0) { /* accesses to config registers with offsets >= 256 * requires indirect access. */ - addr = (func << 12); - addr |= (off & 0x0FFF); - bcma_pcie_write_config(pc, addr, val); + if (off >= PCI_CONFIG_SPACE_SIZE) { + addr = (func << 12); + addr |= (off & 0x0FFF); + bcma_pcie_write_config(pc, addr, val); + } else { + pcicore_write32(pc, addr, val); + } } else { writel(val, mmio); -- cgit v1.2.3 From b09e9abd091a4ed1e638a810b25c6577b4621b12 Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Sat, 12 Jan 2013 02:46:16 -0800 Subject: bcma: add support for 1 and 2 byte extended config space access The sanity checks allow 1 and 2 byte reads/writes of the extended PCI config space to proceed; however, the code only supports 4 byte reads/writes. This patch adds support for 1 and 2 byte reads/writes of the extended PCI config space. Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_pci_host.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index c0cb0620ab62..f92124c29998 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -101,7 +101,7 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, */ if (off >= PCI_CONFIG_SPACE_SIZE) { addr = (func << 12); - addr |= (off & 0x0FFF); + addr |= (off & 0x0FFC); val = bcma_pcie_read_config(pc, addr); } else { addr = BCMA_CORE_PCI_PCICFG0; @@ -164,7 +164,11 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, /* accesses to config registers with offsets >= 256 * requires indirect access. */ - if (off < PCI_CONFIG_SPACE_SIZE) { + if (off >= PCI_CONFIG_SPACE_SIZE) { + addr = (func << 12); + addr |= (off & 0x0FFC); + val = bcma_pcie_read_config(pc, addr); + } else { addr = BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); addr |= (off & 0xfc); @@ -202,13 +206,10 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, /* accesses to config registers with offsets >= 256 * requires indirect access. */ - if (off >= PCI_CONFIG_SPACE_SIZE) { - addr = (func << 12); - addr |= (off & 0x0FFF); + if (off >= PCI_CONFIG_SPACE_SIZE) bcma_pcie_write_config(pc, addr, val); - } else { + else pcicore_write32(pc, addr, val); - } } else { writel(val, mmio); -- cgit v1.2.3 From 660b9caaad380758c756a7e60397e33dab44fe3f Mon Sep 17 00:00:00 2001 From: Nathan Hintz Date: Sat, 12 Jan 2013 02:46:17 -0800 Subject: bcma: use consistent case for 'hex' constants Signed-off-by: Nathan Hintz Acked-by: Hauke Mehrtens Signed-off-by: John W. Linville --- drivers/bcma/driver_pci_host.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/bcma/driver_pci_host.c b/drivers/bcma/driver_pci_host.c index f92124c29998..221f8bb76390 100644 --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -106,7 +106,7 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, } else { addr = BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); - addr |= (off & 0xfc); + addr |= (off & 0xFC); val = pcicore_read32(pc, addr); } } else { @@ -119,7 +119,7 @@ static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, goto out; if (mips_busprobe32(val, mmio)) { - val = 0xffffffff; + val = 0xFFFFFFFF; goto unmap; } } @@ -171,7 +171,7 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, } else { addr = BCMA_CORE_PCI_PCICFG0; addr |= (func << 8); - addr |= (off & 0xfc); + addr |= (off & 0xFC); val = pcicore_read32(pc, addr); } } else { @@ -184,7 +184,7 @@ static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, goto out; if (mips_busprobe32(val, mmio)) { - val = 0xffffffff; + val = 0xFFFFFFFF; goto unmap; } } @@ -280,7 +280,7 @@ static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, /* check for Header type 0 */ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, sizeof(u8)); - if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) + if ((byte_val & 0x7F) != PCI_HEADER_TYPE_NORMAL) return cap_ptr; /* check if the capability pointer field exists */ -- cgit v1.2.3 From d21fa2dad63677b5fd0c9942c0745c1e4f0832df Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Jan 2013 00:25:21 +0100 Subject: iwlwifi: don't memset scalar values The dma_addr_t type is a scalar value, so it should just be assigned, not memset. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/rx.c | 6 +++--- drivers/net/wireless/iwlwifi/pcie/tx.c | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index 02c9016d9684..ea9e9915ad35 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -436,7 +436,7 @@ static int iwl_pcie_rx_alloc(struct iwl_trans *trans) err_rb_stts: dma_free_coherent(dev, sizeof(__le32) * RX_QUEUE_SIZE, rxq->bd, rxq->bd_dma); - memset(&rxq->bd_dma, 0, sizeof(rxq->bd_dma)); + rxq->bd_dma = 0; rxq->bd = NULL; err_bd: return -ENOMEM; @@ -553,7 +553,7 @@ void iwl_pcie_rx_free(struct iwl_trans *trans) dma_free_coherent(trans->dev, sizeof(__le32) * RX_QUEUE_SIZE, rxq->bd, rxq->bd_dma); - memset(&rxq->bd_dma, 0, sizeof(rxq->bd_dma)); + rxq->bd_dma = 0; rxq->bd = NULL; if (rxq->rb_stts) @@ -562,7 +562,7 @@ void iwl_pcie_rx_free(struct iwl_trans *trans) rxq->rb_stts, rxq->rb_stts_dma); else IWL_DEBUG_INFO(trans, "Free rxq->rb_stts which is NULL\n"); - memset(&rxq->rb_stts_dma, 0, sizeof(rxq->rb_stts_dma)); + rxq->rb_stts_dma = 0; rxq->rb_stts = NULL; } diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index d25fc8aaccc6..3ff3e8b72fb0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -615,7 +615,7 @@ static void iwl_pcie_txq_free(struct iwl_trans *trans, int txq_id) if (txq->q.n_bd) { dma_free_coherent(dev, sizeof(struct iwl_tfd) * txq->q.n_bd, txq->tfds, txq->q.dma_addr); - memset(&txq->q.dma_addr, 0, sizeof(txq->q.dma_addr)); + txq->q.dma_addr = 0; } kfree(txq->entries); -- cgit v1.2.3 From b1cf1bc160a94f2d56863522982160c9373b8860 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Jan 2013 10:26:17 +0100 Subject: iwlwifi: don't enable all interrupts on resuming Enabling the RF-kill interrupt is sufficient for getting RF-kill notifications, and no other interrupt is needed as the device isn't functional when suspended and will be restarted/reconfigured when mac80211 resumes it later. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/trans.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index db3b0552b2eb..2de5770de64b 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -719,9 +719,6 @@ static int iwl_trans_pcie_resume(struct iwl_trans *trans) hw_rfkill = iwl_is_rfkill_set(trans); iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill); - if (!hw_rfkill) - iwl_enable_interrupts(trans); - return 0; } #endif /* CONFIG_PM_SLEEP */ -- cgit v1.2.3 From 01387ffd19f37b4026fd0e4c32260bc25f6469d4 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 9 Jan 2013 11:37:59 +0200 Subject: iwlwifi: allow to zero SRAM Sending a NULL pointer to iwl_trans_write_mem allows now to zero SRAM. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/iwl-trans.h | 3 ++- drivers/net/wireless/iwlwifi/pcie/trans.c | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index b0d5c715ca1e..55a140ade5a7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -391,7 +391,8 @@ struct iwl_trans; * @read_prph: read a DWORD from a periphery register * @write_prph: write a DWORD to a periphery register * @read_mem: read device's SRAM in DWORD - * @write_mem: write device's SRAM in DWORD + * @write_mem: write device's SRAM in DWORD. If %buf is %NULL, then the memory + * will be zeroed. * @configure: configure parameters required by the transport layer from * the op_mode. May be called several times before start_fw, can't be * called after that. diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 2de5770de64b..4028c03eff5f 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -815,7 +815,8 @@ static int iwl_trans_pcie_write_mem(struct iwl_trans *trans, u32 addr, if (iwl_trans_grab_nic_access(trans, false)) { iwl_write32(trans, HBUS_TARG_MEM_WADDR, addr); for (offs = 0; offs < dwords; offs++) - iwl_write32(trans, HBUS_TARG_MEM_WDAT, vals[offs]); + iwl_write32(trans, HBUS_TARG_MEM_WDAT, + vals ? vals[offs] : 0); iwl_trans_release_nic_access(trans); } else { ret = -EBUSY; -- cgit v1.2.3 From 22dc3c9561825a7c2cd18d01b01358c2141a8e16 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 9 Jan 2013 00:47:07 +0100 Subject: iwlwifi: simplify scheduler memory clearing Writing 130 dwords into the device one by one is rather inefficient, every one needs to lock, grab NIC access (a few register reads/writes) and then write the address and data registers. Use the new memory clearing function to make this easier and faster. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/pcie/tx.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index 3ff3e8b72fb0..d3c4e8f017ef 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -641,9 +641,11 @@ static void iwl_pcie_txq_set_sched(struct iwl_trans *trans, u32 mask) void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - u32 a; + int nq = trans->cfg->base_params->num_of_queues; int chan; u32 reg_val; + int clear_dwords = (SCD_TRANS_TBL_OFFSET_QUEUE(nq) - + SCD_CONTEXT_MEM_LOWER_BOUND) / sizeof(u32); /* make sure all queue are not stopped/used */ memset(trans_pcie->queue_stopped, 0, sizeof(trans_pcie->queue_stopped)); @@ -655,20 +657,10 @@ void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr) WARN_ON(scd_base_addr != 0 && scd_base_addr != trans_pcie->scd_base_addr); - a = trans_pcie->scd_base_addr + SCD_CONTEXT_MEM_LOWER_BOUND; - /* reset conext data memory */ - for (; a < trans_pcie->scd_base_addr + SCD_CONTEXT_MEM_UPPER_BOUND; - a += 4) - iwl_trans_write_mem32(trans, a, 0); - /* reset tx status memory */ - for (; a < trans_pcie->scd_base_addr + SCD_TX_STTS_MEM_UPPER_BOUND; - a += 4) - iwl_trans_write_mem32(trans, a, 0); - for (; a < trans_pcie->scd_base_addr + - SCD_TRANS_TBL_OFFSET_QUEUE( - trans->cfg->base_params->num_of_queues); - a += 4) - iwl_trans_write_mem32(trans, a, 0); + /* reset context data, TX status and translation data */ + iwl_trans_write_mem(trans, trans_pcie->scd_base_addr + + SCD_CONTEXT_MEM_LOWER_BOUND, + NULL, clear_dwords); iwl_write_prph(trans, SCD_DRAM_BASE_ADDR, trans_pcie->scd_bc_tbls.dma >> 10); -- cgit v1.2.3 From ddaf5a5b300b8f9d3591b509fd8bedab1c9887be Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 8 Jan 2013 11:25:44 +0100 Subject: iwlwifi: enable communication with WoWLAN firmware On resuming, the opmode may have to be able to talk to the WoWLAN/D3 firmware in order to query it about its status and wakeup reasons. To do that, the opmode has to call the new d3_resume() transport API which will set up the device for command communcation. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 5 +- drivers/net/wireless/iwlwifi/iwl-fh.h | 4 ++ drivers/net/wireless/iwlwifi/iwl-trans.h | 29 +++++++-- drivers/net/wireless/iwlwifi/pcie/internal.h | 2 + drivers/net/wireless/iwlwifi/pcie/rx.c | 6 +- drivers/net/wireless/iwlwifi/pcie/trans.c | 91 ++++++++++++++++++++++------ drivers/net/wireless/iwlwifi/pcie/tx.c | 23 +++++++ 7 files changed, 136 insertions(+), 24 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 1ed4bc694d29..fef17c15562b 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -206,7 +206,8 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, #ifdef CONFIG_PM_SLEEP if (priv->fw->img[IWL_UCODE_WOWLAN].sec[0].len && - priv->trans->ops->wowlan_suspend && + priv->trans->ops->d3_suspend && + priv->trans->ops->d3_resume && device_can_wakeup(priv->trans->dev)) { hw->wiphy->wowlan.flags = WIPHY_WOWLAN_MAGIC_PKT | WIPHY_WOWLAN_DISCONNECT | @@ -426,7 +427,7 @@ static int iwlagn_mac_suspend(struct ieee80211_hw *hw, if (ret) goto error; - iwl_trans_wowlan_suspend(priv->trans); + iwl_trans_d3_suspend(priv->trans); goto out; diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index ec48563d3c6a..c646a90b725e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -225,6 +225,8 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) #define FH_RSCSR_CHNL0_RBDCB_WPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x008) #define FH_RSCSR_CHNL0_WPTR (FH_RSCSR_CHNL0_RBDCB_WPTR_REG) +#define FW_RSCSR_CHNL0_RXDCB_RDPTR_REG (FH_MEM_RSCSR_CHNL0 + 0x00c) +#define FH_RSCSR_CHNL0_RDPTR FW_RSCSR_CHNL0_RXDCB_RDPTR_REG /** * Rx Config/Status Registers (RCSR) @@ -257,6 +259,8 @@ static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) #define FH_MEM_RCSR_CHNL0 (FH_MEM_RCSR_LOWER_BOUND) #define FH_MEM_RCSR_CHNL0_CONFIG_REG (FH_MEM_RCSR_CHNL0) +#define FH_MEM_RCSR_CHNL0_RBDCB_WPTR (FH_MEM_RCSR_CHNL0 + 0x8) +#define FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ (FH_MEM_RCSR_CHNL0 + 0x10) #define FH_RCSR_CHNL0_RX_CONFIG_RB_TIMEOUT_MSK (0x00000FF0) /* bits 4-11 */ #define FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_MSK (0x00001000) /* bits 12 */ diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 55a140ade5a7..0f85eb305878 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -307,6 +307,16 @@ static inline struct page *rxb_steal_page(struct iwl_rx_cmd_buffer *r) #define IWL_MAX_TID_COUNT 8 #define IWL_FRAME_LIMIT 64 +/** + * enum iwl_wowlan_status - WoWLAN image/device status + * @IWL_D3_STATUS_ALIVE: firmware is still running after resume + * @IWL_D3_STATUS_RESET: device was reset while suspended + */ +enum iwl_d3_status { + IWL_D3_STATUS_ALIVE, + IWL_D3_STATUS_RESET, +}; + /** * struct iwl_trans_config - transport configuration * @@ -363,9 +373,12 @@ struct iwl_trans; * May sleep * @stop_device:stops the whole device (embedded CPU put to reset) * May sleep - * @wowlan_suspend: put the device into the correct mode for WoWLAN during + * @d3_suspend: put the device into the correct mode for WoWLAN during * suspend. This is optional, if not implemented WoWLAN will not be * supported. This callback may sleep. + * @d3_resume: resume the device after WoWLAN, enabling the opmode to + * talk to the WoWLAN image to get its status. This is optional, if not + * implemented WoWLAN will not be supported. This callback may sleep. * @send_cmd:send a host command. Must return -ERFKILL if RFkill is asserted. * If RFkill is asserted in the middle of a SYNC host command, it must * return -ERFKILL straight away. @@ -409,7 +422,8 @@ struct iwl_trans_ops { void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); void (*stop_device)(struct iwl_trans *trans); - void (*wowlan_suspend)(struct iwl_trans *trans); + void (*d3_suspend)(struct iwl_trans *trans); + int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status); int (*send_cmd)(struct iwl_trans *trans, struct iwl_host_cmd *cmd); @@ -562,10 +576,17 @@ static inline void iwl_trans_stop_device(struct iwl_trans *trans) trans->state = IWL_TRANS_NO_FW; } -static inline void iwl_trans_wowlan_suspend(struct iwl_trans *trans) +static inline void iwl_trans_d3_suspend(struct iwl_trans *trans) +{ + might_sleep(); + trans->ops->d3_suspend(trans); +} + +static inline int iwl_trans_d3_resume(struct iwl_trans *trans, + enum iwl_d3_status *status) { might_sleep(); - trans->ops->wowlan_suspend(trans); + return trans->ops->d3_resume(trans, status); } static inline int iwl_trans_send_cmd(struct iwl_trans *trans, diff --git a/drivers/net/wireless/iwlwifi/pcie/internal.h b/drivers/net/wireless/iwlwifi/pcie/internal.h index 8f017c34ab2b..20735a008cab 100644 --- a/drivers/net/wireless/iwlwifi/pcie/internal.h +++ b/drivers/net/wireless/iwlwifi/pcie/internal.h @@ -357,6 +357,8 @@ void iwl_pcie_hcmd_complete(struct iwl_trans *trans, struct iwl_rx_cmd_buffer *rxb, int handler_status); void iwl_trans_pcie_reclaim(struct iwl_trans *trans, int txq_id, int ssn, struct sk_buff_head *skbs); +void iwl_trans_pcie_tx_reset(struct iwl_trans *trans); + /***************************************************** * Error handling ******************************************************/ diff --git a/drivers/net/wireless/iwlwifi/pcie/rx.c b/drivers/net/wireless/iwlwifi/pcie/rx.c index ea9e9915ad35..96013030fcc7 100644 --- a/drivers/net/wireless/iwlwifi/pcie/rx.c +++ b/drivers/net/wireless/iwlwifi/pcie/rx.c @@ -455,6 +455,10 @@ static void iwl_pcie_rx_hw_init(struct iwl_trans *trans, struct iwl_rxq *rxq) /* Stop Rx DMA */ iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0); + /* reset and flush pointers */ + iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_RBDCB_WPTR, 0); + iwl_write_direct32(trans, FH_MEM_RCSR_CHNL0_FLUSH_RB_REQ, 0); + iwl_write_direct32(trans, FH_RSCSR_CHNL0_RDPTR, 0); /* Reset driver's Rx queue write index */ iwl_write_direct32(trans, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0); @@ -491,7 +495,6 @@ int iwl_pcie_rx_init(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); struct iwl_rxq *rxq = &trans_pcie->rxq; - int i, err; unsigned long flags; @@ -518,6 +521,7 @@ int iwl_pcie_rx_init(struct iwl_trans *trans) rxq->read = rxq->write = 0; rxq->write_actual = 0; rxq->free_count = 0; + memset(rxq->rb_stts, 0, sizeof(*rxq->rb_stts)); spin_unlock_irqrestore(&rxq->lock, flags); iwl_pcie_rx_replenish(trans); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 4028c03eff5f..59340ff13a64 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -75,21 +75,16 @@ #include "iwl-agn-hw.h" #include "internal.h" -static void iwl_pcie_set_pwr_vmain(struct iwl_trans *trans) +static void iwl_pcie_set_pwr(struct iwl_trans *trans, bool vaux) { -/* - * (for documentation purposes) - * to set power to V_AUX, do: - - if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) - iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VAUX, - ~APMG_PS_CTRL_MSK_PWR_SRC); - */ - - iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG, - APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, - ~APMG_PS_CTRL_MSK_PWR_SRC); + if (vaux && pci_pme_capable(to_pci_dev(trans->dev), PCI_D3cold)) + iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VAUX, + ~APMG_PS_CTRL_MSK_PWR_SRC); + else + iwl_set_bits_mask_prph(trans, APMG_PS_CTRL_REG, + APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, + ~APMG_PS_CTRL_MSK_PWR_SRC); } /* PCI registers */ @@ -259,7 +254,7 @@ static int iwl_pcie_nic_init(struct iwl_trans *trans) spin_unlock_irqrestore(&trans_pcie->irq_lock, flags); - iwl_pcie_set_pwr_vmain(trans); + iwl_pcie_set_pwr(trans, false); iwl_op_mode_nic_config(trans->op_mode); @@ -545,15 +540,76 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) clear_bit(STATUS_RFKILL, &trans_pcie->status); } -static void iwl_trans_pcie_wowlan_suspend(struct iwl_trans *trans) +static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans) { /* let the ucode operate on its own */ iwl_write32(trans, CSR_UCODE_DRV_GP1_SET, CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); iwl_disable_interrupts(trans); + iwl_pcie_disable_ict(trans); + iwl_clear_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + iwl_clear_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + + /* + * reset TX queues -- some of their registers reset during S3 + * so if we don't reset everything here the D3 image would try + * to execute some invalid memory upon resume + */ + iwl_trans_pcie_tx_reset(trans); + + iwl_pcie_set_pwr(trans, true); +} + +static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, + enum iwl_d3_status *status) +{ + u32 val; + int ret; + + iwl_pcie_set_pwr(trans, false); + + val = iwl_read32(trans, CSR_RESET); + if (val & CSR_RESET_REG_FLAG_NEVO_RESET) { + *status = IWL_D3_STATUS_RESET; + return 0; + } + + /* + * Also enables interrupts - none will happen as the device doesn't + * know we're waking it up, only when the opmode actually tells it + * after this call. + */ + iwl_pcie_reset_ict(trans); + + iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ); + iwl_set_bit(trans, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); + + ret = iwl_poll_bit(trans, CSR_GP_CNTRL, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, + 25000); + if (ret) { + IWL_ERR(trans, "Failed to resume the device (mac ready)\n"); + return ret; + } + + iwl_trans_pcie_tx_reset(trans); + + ret = iwl_pcie_rx_init(trans); + if (ret) { + IWL_ERR(trans, "Failed to resume the device (RX reset)\n"); + return ret; + } + + iwl_write32(trans, CSR_UCODE_DRV_GP1_CLR, + CSR_UCODE_DRV_GP1_BIT_D3_CFG_COMPLETE); + + *status = IWL_D3_STATUS_ALIVE; + return 0; } static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) @@ -1279,7 +1335,8 @@ static const struct iwl_trans_ops trans_ops_pcie = { .start_fw = iwl_trans_pcie_start_fw, .stop_device = iwl_trans_pcie_stop_device, - .wowlan_suspend = iwl_trans_pcie_wowlan_suspend, + .d3_suspend = iwl_trans_pcie_d3_suspend, + .d3_resume = iwl_trans_pcie_d3_resume, .send_cmd = iwl_trans_pcie_send_hcmd, diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index d3c4e8f017ef..fd3280fca445 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -692,6 +692,29 @@ void iwl_pcie_tx_start(struct iwl_trans *trans, u32 scd_base_addr) APMG_PCIDEV_STT_VAL_L1_ACT_DIS); } +void iwl_trans_pcie_tx_reset(struct iwl_trans *trans) +{ + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); + int txq_id; + + for (txq_id = 0; txq_id < trans->cfg->base_params->num_of_queues; + txq_id++) { + struct iwl_txq *txq = &trans_pcie->txq[txq_id]; + + iwl_write_direct32(trans, FH_MEM_CBBC_QUEUE(txq_id), + txq->q.dma_addr >> 8); + iwl_pcie_txq_unmap(trans, txq_id); + txq->q.read_ptr = 0; + txq->q.write_ptr = 0; + } + + /* Tell NIC where to find the "keep warm" buffer */ + iwl_write_direct32(trans, FH_KW_MEM_ADDR_REG, + trans_pcie->kw.dma >> 4); + + iwl_pcie_tx_start(trans, trans_pcie->scd_base_addr); +} + /* * iwl_pcie_tx_stop - Stop all Tx DMA channels */ -- cgit v1.2.3 From c3e5d7181afb66657393066bccce0956fab09ab3 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 9 Jan 2013 10:20:36 +0200 Subject: iwlwifi: audit single frames from AGG queue in RS The rate scaling won't treat the information in a frame with IEEE80211_TX_CTL_AMPDU set if IEEE80211_TX_STAT_AMPDU is cleared. But all the frames coming from an AGG tx queue have IEEE80211_TX_CTL_AMPDU set, and IEEE80211_TX_STAT_AMPDU is set only if the frame was sent in an AMPDU. This means that all the data in frames in AGG tx queues that aren't sent as an AMPDU is thrown away. This is even more harmful when in bad link conditions, the frames are sent in an AMPDU and then finally sent as single frame. So a lot of failures weren't reported and the rate scaling got stuck in high rates leading to very poor connectivity. Fix that by clearing IEEE80211_TX_CTL_AMPDU when the frame isn't part of an AMPDU. This bug was introduced by 2eb81a40aa521035ff9c8c8309e482dff523f8c9 iwlwifi: don't clear CTL_AMPDU on frame status This fix basically reverts the aforementioned commit. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/tx.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index a790599fe2c2..31534f7c0548 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1079,6 +1079,8 @@ static void iwlagn_set_tx_status(struct iwl_priv *priv, { u16 status = le16_to_cpu(tx_resp->status.status); + info->flags &= ~IEEE80211_TX_CTL_AMPDU; + info->status.rates[0].count = tx_resp->failure_frame + 1; info->flags |= iwl_tx_status_to_mac80211(status); iwlagn_hwrate_to_tx_control(priv, le32_to_cpu(tx_resp->rate_n_flags), -- cgit v1.2.3 From 1c3fea82d6ebf33edadefed2d9ce3efa1a654338 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 2 Jan 2013 12:12:25 +0200 Subject: iwlwifi: improve the reports in TX path Also when things go wrong (queues don't get emtpy), try to get some data from the HW. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/dvm/mac80211.c | 3 -- drivers/net/wireless/iwlwifi/dvm/tx.c | 28 +++++++++++-------- drivers/net/wireless/iwlwifi/pcie/trans.c | 43 ++++++++++++++++++++++++++++- drivers/net/wireless/iwlwifi/pcie/tx.c | 7 ++--- 4 files changed, 61 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index fef17c15562b..2da2627e1743 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -521,9 +521,6 @@ static void iwlagn_mac_tx(struct ieee80211_hw *hw, { struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); - IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, - ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - if (iwlagn_tx_skb(priv, control->sta, skb)) ieee80211_free_txskb(hw, skb); } diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index df76881385ae..b0aad71c12a0 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -231,13 +231,11 @@ static void iwlagn_tx_cmd_build_hwcrypto(struct iwl_priv *priv, memcpy(tx_cmd->key, keyconf->key, keyconf->keylen); if (info->flags & IEEE80211_TX_CTL_AMPDU) tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK; - IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n"); break; case WLAN_CIPHER_SUITE_TKIP: tx_cmd->sec_ctl = TX_CMD_SEC_TKIP; ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key); - IWL_DEBUG_TX(priv, "tx_cmd with tkip hwcrypto\n"); break; case WLAN_CIPHER_SUITE_WEP104: @@ -355,8 +353,6 @@ int iwlagn_tx_skb(struct iwl_priv *priv, } } - IWL_DEBUG_TX(priv, "station Id %d\n", sta_id); - if (sta) sta_priv = (void *)sta->drv_priv; @@ -472,6 +468,9 @@ int iwlagn_tx_skb(struct iwl_priv *priv, WARN_ON_ONCE(is_agg && priv->queue_to_mac80211[txq_id] != info->hw_queue); + IWL_DEBUG_TX(priv, "TX to [%d|%d] Q:%d - seq: 0x%x\n", sta_id, tid, + txq_id, seq_number); + if (iwl_trans_tx(priv->trans, skb, dev_cmd, txq_id)) goto drop_unlock_sta; @@ -953,12 +952,6 @@ static void iwl_rx_reply_tx_agg(struct iwl_priv *priv, if (status & (AGG_TX_STATE_FEW_BYTES_MSK | AGG_TX_STATE_ABORT_MSK)) continue; - - IWL_DEBUG_TX_REPLY(priv, "status %s (0x%08x), " - "try-count (0x%08x)\n", - iwl_get_agg_tx_fail_reason(fstatus), - fstatus & AGG_TX_STATUS_MSK, - fstatus & AGG_TX_TRY_MSK); } } @@ -1212,16 +1205,27 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, freed++; } - WARN_ON(!is_agg && freed != 1); + if (!is_agg && freed != 1) + IWL_ERR(priv, "Q: %d, freed %d\n", txq_id, freed); /* * An offchannel frame can be send only on the AUX queue, where * there is no aggregation (and reordering) so it only is single * skb is expected to be processed. */ - WARN_ON(is_offchannel_skb && freed != 1); + if (is_offchannel_skb && freed != 1) + IWL_ERR(priv, "OFFCHANNEL SKB freed %d\n", freed); } + IWL_DEBUG_TX_REPLY(priv, "TXQ %d status %s (0x%08x)\n", txq_id, + iwl_get_tx_fail_reason(status), status); + + IWL_DEBUG_TX_REPLY(priv, + "\t\t\t\tinitial_rate 0x%x retries %d, idx=%d ssn=%d seq_ctl=0x%x\n", + le32_to_cpu(tx_resp->rate_n_flags), + tx_resp->failure_frame, SEQ_TO_INDEX(sequence), ssn, + le16_to_cpu(tx_resp->seq_ctl)); + iwl_check_abort_status(priv, tx_resp->frame_count, status); spin_unlock(&priv->sta_lock); diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 59340ff13a64..c57641eb83d5 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -890,6 +890,8 @@ static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans) struct iwl_queue *q; int cnt; unsigned long now = jiffies; + u32 scd_sram_addr; + u8 buf[16]; int ret = 0; /* waiting for all the tx frames complete might take a while */ @@ -903,11 +905,50 @@ static int iwl_trans_pcie_wait_txq_empty(struct iwl_trans *trans) msleep(1); if (q->read_ptr != q->write_ptr) { - IWL_ERR(trans, "fail to flush all tx fifo queues\n"); + IWL_ERR(trans, + "fail to flush all tx fifo queues Q %d\n", cnt); ret = -ETIMEDOUT; break; } } + + if (!ret) + return 0; + + IWL_ERR(trans, "Current SW read_ptr %d write_ptr %d\n", + txq->q.read_ptr, txq->q.write_ptr); + + scd_sram_addr = trans_pcie->scd_base_addr + + SCD_TX_STTS_QUEUE_OFFSET(txq->q.id); + iwl_trans_read_mem_bytes(trans, scd_sram_addr, buf, sizeof(buf)); + + iwl_print_hex_error(trans, buf, sizeof(buf)); + + for (cnt = 0; cnt < FH_TCSR_CHNL_NUM; cnt++) + IWL_ERR(trans, "FH TRBs(%d) = 0x%08x\n", cnt, + iwl_read_direct32(trans, FH_TX_TRB_REG(cnt))); + + for (cnt = 0; cnt < trans->cfg->base_params->num_of_queues; cnt++) { + u32 status = iwl_read_prph(trans, SCD_QUEUE_STATUS_BITS(cnt)); + u8 fifo = (status >> SCD_QUEUE_STTS_REG_POS_TXF) & 0x7; + bool active = !!(status & BIT(SCD_QUEUE_STTS_REG_POS_ACTIVE)); + u32 tbl_dw = + iwl_trans_read_mem32(trans, trans_pcie->scd_base_addr + + SCD_TRANS_TBL_OFFSET_QUEUE(cnt)); + + if (cnt & 0x1) + tbl_dw = (tbl_dw & 0xFFFF0000) >> 16; + else + tbl_dw = tbl_dw & 0x0000FFFF; + + IWL_ERR(trans, + "Q %d is %sactive and mapped to fifo %d ra_tid 0x%04x [%d,%d]\n", + cnt, active ? "" : "in", fifo, tbl_dw, + iwl_read_prph(trans, + SCD_QUEUE_RDPTR(cnt)) & (txq->q.n_bd - 1), + iwl_read_prph(trans, SCD_QUEUE_WRPTR(cnt))); + } + return ret; } diff --git a/drivers/net/wireless/iwlwifi/pcie/tx.c b/drivers/net/wireless/iwlwifi/pcie/tx.c index fd3280fca445..a93f06762b96 100644 --- a/drivers/net/wireless/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/iwlwifi/pcie/tx.c @@ -309,6 +309,9 @@ void iwl_pcie_txq_inc_wr_ptr(struct iwl_trans *trans, struct iwl_txq *txq) return; } + IWL_DEBUG_TX(trans, "Q:%d WR: 0x%x\n", txq_id, + txq->q.write_ptr); + iwl_write_direct32(trans, HBUS_TARG_WRPTR, txq->q.write_ptr | (txq_id << 8)); @@ -1660,10 +1663,6 @@ int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); tx_cmd->dram_msb_ptr = iwl_get_dma_hi_addr(scratch_phys); - IWL_DEBUG_TX(trans, "sequence nr = 0X%x\n", - le16_to_cpu(dev_cmd->hdr.sequence)); - IWL_DEBUG_TX(trans, "tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); - /* Set up entry for this TFD in Tx byte-count array */ iwl_pcie_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len)); -- cgit v1.2.3 From 1626e0fa740dec8665a973cf2349405cdfeb46dc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 11 Jan 2013 14:34:25 +0100 Subject: mac80211: fix FT roaming MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During FT roaming, wpa_supplicant attempts to set the key before association. This used to be rejected, but as a side effect of my commit 66e67e418908442389d3a9e ("mac80211: redesign auth/assoc") the key was accepted causing hardware crypto to not be used for it as the station isn't added to the driver yet. It would be possible to accept the key and then add it to the driver when the station has been added. However, this may run into issues with drivers using the state- based station adding if they accept the key only after association like it used to be. For now, revert to the behaviour from before the auth and assoc change. Cc: stable@vger.kernel.org Reported-by: Cédric Debarge Tested-by: Cédric Debarge Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 47e0aca614b7..516fbc96feff 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -164,7 +164,17 @@ static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev, sta = sta_info_get(sdata, mac_addr); else sta = sta_info_get_bss(sdata, mac_addr); - if (!sta) { + /* + * The ASSOC test makes sure the driver is ready to + * receive the key. When wpa_supplicant has roamed + * using FT, it attempts to set the key before + * association has completed, this rejects that attempt + * so it will set the key again after assocation. + * + * TODO: accept the key if we have a station entry and + * add it to the device after the station. + */ + if (!sta || !test_sta_flag(sta, WLAN_STA_ASSOC)) { ieee80211_key_free(sdata->local, key); err = -ENOENT; goto out_unlock; -- cgit v1.2.3 From aacde9ee45225f7e0b90960f479aef83c66bfdc0 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 20 Dec 2012 14:41:18 +0100 Subject: mac80211: synchronize scan off/on-channel and PS states Since: commit b23b025fe246f3acc2988eb6d400df34c27cb8ae Author: Ben Greear Date: Fri Feb 4 11:54:17 2011 -0800 mac80211: Optimize scans on current operating channel. we do not disable PS while going back to operational channel (on ieee80211_scan_state_suspend) and deffer that until scan finish. But since we are allowed to send frames, we can send a frame to AP without PM bit set, so disable PS on AP side. Then when we switch to off-channel (in ieee80211_scan_state_resume) we do not enable PS. Hence we are off-channel with PS disabled, frames are not buffered by AP. To fix remove offchannel_ps_disable argument and always enable PS when going off-channel and disable it when going on-channel, like it was before. Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka Tested-by: Seth Forshee Signed-off-by: Johannes Berg --- net/mac80211/ieee80211_i.h | 6 ++---- net/mac80211/offchannel.c | 19 +++++++------------ net/mac80211/scan.c | 15 +++++---------- 3 files changed, 14 insertions(+), 26 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8563b9a5cac3..2ed065c09562 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1358,10 +1358,8 @@ int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata); void ieee80211_sched_scan_stopped_work(struct work_struct *work); /* off-channel helpers */ -void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, - bool offchannel_ps_enable); -void ieee80211_offchannel_return(struct ieee80211_local *local, - bool offchannel_ps_disable); +void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local); +void ieee80211_offchannel_return(struct ieee80211_local *local); void ieee80211_roc_setup(struct ieee80211_local *local); void ieee80211_start_next_roc(struct ieee80211_local *local); void ieee80211_roc_purge(struct ieee80211_sub_if_data *sdata); diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index a5379aea7d09..a3ad4c3c80a3 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -102,8 +102,7 @@ static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata) ieee80211_sta_reset_conn_monitor(sdata); } -void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, - bool offchannel_ps_enable) +void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; @@ -134,8 +133,7 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { netif_tx_stop_all_queues(sdata->dev); - if (offchannel_ps_enable && - (sdata->vif.type == NL80211_IFTYPE_STATION) && + if (sdata->vif.type == NL80211_IFTYPE_STATION && sdata->u.mgd.associated) ieee80211_offchannel_ps_enable(sdata); } @@ -143,8 +141,7 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, mutex_unlock(&local->iflist_mtx); } -void ieee80211_offchannel_return(struct ieee80211_local *local, - bool offchannel_ps_disable) +void ieee80211_offchannel_return(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata; @@ -163,11 +160,9 @@ void ieee80211_offchannel_return(struct ieee80211_local *local, continue; /* Tell AP we're back */ - if (offchannel_ps_disable && - sdata->vif.type == NL80211_IFTYPE_STATION) { - if (sdata->u.mgd.associated) - ieee80211_offchannel_ps_disable(sdata); - } + if (sdata->vif.type == NL80211_IFTYPE_STATION && + sdata->u.mgd.associated) + ieee80211_offchannel_ps_disable(sdata); if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { /* @@ -385,7 +380,7 @@ void ieee80211_sw_roc_work(struct work_struct *work) local->tmp_channel = NULL; ieee80211_hw_config(local, 0); - ieee80211_offchannel_return(local, true); + ieee80211_offchannel_return(local); } ieee80211_recalc_idle(local); diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index d59fc6818b1c..bf82e69d0601 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -292,7 +292,7 @@ static void __ieee80211_scan_completed(struct ieee80211_hw *hw, bool aborted, if (!was_hw_scan) { ieee80211_configure_filter(local); drv_sw_scan_complete(local); - ieee80211_offchannel_return(local, true); + ieee80211_offchannel_return(local); } ieee80211_recalc_idle(local); @@ -341,7 +341,7 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) local->next_scan_state = SCAN_DECISION; local->scan_channel_idx = 0; - ieee80211_offchannel_stop_vifs(local, true); + ieee80211_offchannel_stop_vifs(local); ieee80211_configure_filter(local); @@ -678,12 +678,8 @@ static void ieee80211_scan_state_suspend(struct ieee80211_local *local, local->scan_channel = NULL; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); - /* - * Re-enable vifs and beaconing. Leave PS - * in off-channel state..will put that back - * on-channel at the end of scanning. - */ - ieee80211_offchannel_return(local, false); + /* disable PS */ + ieee80211_offchannel_return(local); *next_delay = HZ / 5; /* afterwards, resume scan & go to next channel */ @@ -693,8 +689,7 @@ static void ieee80211_scan_state_suspend(struct ieee80211_local *local, static void ieee80211_scan_state_resume(struct ieee80211_local *local, unsigned long *next_delay) { - /* PS already is in off-channel mode */ - ieee80211_offchannel_stop_vifs(local, false); + ieee80211_offchannel_stop_vifs(local); if (local->ops->flush) { drv_flush(local, false); -- cgit v1.2.3 From b4a7ff75ba3545b061d4fe63f0bb9136ccfe8b19 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 13 Jan 2013 23:10:26 +0100 Subject: mac80211: fix monitor mode injection Channel contexts are not always used with monitor interfaces. If no channel context is set, use the oper channel, otherwise tx fails. Signed-off-by: Felix Fietkau [check local->use_chanctx] Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index e9eadc40c09c..467c1d1b66f2 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1673,10 +1673,13 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, chanctx_conf = rcu_dereference(tmp_sdata->vif.chanctx_conf); } - if (!chanctx_conf) - goto fail_rcu; - chan = chanctx_conf->def.chan; + if (chanctx_conf) + chan = chanctx_conf->def.chan; + else if (!local->use_chanctx) + chan = local->_oper_channel; + else + goto fail_rcu; /* * Frame injection is not allowed if beaconing is not allowed -- cgit v1.2.3 From 0ae997dc75efb60d47f0c71890f1e972f7d462c1 Mon Sep 17 00:00:00 2001 From: Yacine Belkadi Date: Sat, 12 Jan 2013 13:54:14 +0100 Subject: {cfg,mac}80211.h: fix some kernel-doc warnings When building the 80211 DocBook, scripts/kernel-doc reports the following type of warnings: Warning(include/net/cfg80211.h:334): No description found for return value of 'cfg80211_get_chandef_type' These warnings are only reported when scripts/kernel-doc runs in verbose mode. To fix these use "Return:" to describe function return values. Signed-off-by: Yacine Belkadi [adjust for freq_reg_info() change] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 159 +++++++++++++++++++++++++++++-------------------- include/net/mac80211.h | 74 ++++++++++++++++++----- 2 files changed, 153 insertions(+), 80 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 4275127da05a..3d8717a0d3b2 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -326,7 +326,7 @@ struct cfg80211_chan_def { * cfg80211_get_chandef_type - return old channel type from chandef * @chandef: the channel definition * - * Returns the old channel type (NOHT, HT20, HT40+/-) from a given + * Return: The old channel type (NOHT, HT20, HT40+/-) from a given * chandef, which must have a bandwidth allowing this conversion. */ static inline enum nl80211_channel_type @@ -364,7 +364,7 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef, * @chandef1: first channel definition * @chandef2: second channel definition * - * Returns %true if the channels defined by the channel definitions are + * Return: %true if the channels defined by the channel definitions are * identical, %false otherwise. */ static inline bool @@ -382,7 +382,7 @@ cfg80211_chandef_identical(const struct cfg80211_chan_def *chandef1, * @chandef1: first channel definition * @chandef2: second channel definition * - * Returns %NULL if the given channel definitions are incompatible, + * Return: %NULL if the given channel definitions are incompatible, * chandef1 or chandef2 otherwise. */ const struct cfg80211_chan_def * @@ -392,6 +392,7 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *chandef1, /** * cfg80211_chandef_valid - check if a channel definition is valid * @chandef: the channel definition to check + * Return: %true if the channel definition is valid. %false otherwise. */ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); @@ -399,7 +400,8 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef); * cfg80211_chandef_usable - check if secondary channels can be used * @wiphy: the wiphy to validate against * @chandef: the channel definition to check - * @prohibited_flags: the regulatory chanenl flags that must not be set + * @prohibited_flags: the regulatory channel flags that must not be set + * Return: %true if secondary channels are usable. %false otherwise. */ bool cfg80211_chandef_usable(struct wiphy *wiphy, const struct cfg80211_chan_def *chandef, @@ -1266,7 +1268,7 @@ struct cfg80211_bss { * * Note that the return value is an RCU-protected pointer, so * rcu_read_lock() must be held when calling this function. - * Returns %NULL if not found. + * Return: %NULL if not found. */ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); @@ -2409,6 +2411,7 @@ static inline void wiphy_net_set(struct wiphy *wiphy, struct net *net) * wiphy_priv - return priv from wiphy * * @wiphy: the wiphy whose priv pointer to return + * Return: The priv of @wiphy. */ static inline void *wiphy_priv(struct wiphy *wiphy) { @@ -2420,6 +2423,7 @@ static inline void *wiphy_priv(struct wiphy *wiphy) * priv_to_wiphy - return the wiphy containing the priv * * @priv: a pointer previously returned by wiphy_priv + * Return: The wiphy of @priv. */ static inline struct wiphy *priv_to_wiphy(void *priv) { @@ -2442,6 +2446,7 @@ static inline void set_wiphy_dev(struct wiphy *wiphy, struct device *dev) * wiphy_dev - get wiphy dev pointer * * @wiphy: The wiphy whose device struct to look up + * Return: The dev of @wiphy. */ static inline struct device *wiphy_dev(struct wiphy *wiphy) { @@ -2452,6 +2457,7 @@ static inline struct device *wiphy_dev(struct wiphy *wiphy) * wiphy_name - get wiphy name * * @wiphy: The wiphy whose name to return + * Return: The name of @wiphy. */ static inline const char *wiphy_name(const struct wiphy *wiphy) { @@ -2467,8 +2473,8 @@ static inline const char *wiphy_name(const struct wiphy *wiphy) * Create a new wiphy and associate the given operations with it. * @sizeof_priv bytes are allocated for private use. * - * The returned pointer must be assigned to each netdev's - * ieee80211_ptr for proper operation. + * Return: A pointer to the new wiphy. This pointer must be + * assigned to each netdev's ieee80211_ptr for proper operation. */ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); @@ -2477,7 +2483,7 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); * * @wiphy: The wiphy to register. * - * Returns a non-negative wiphy index or a negative error code. + * Return: A non-negative wiphy index or a negative error code. */ extern int wiphy_register(struct wiphy *wiphy); @@ -2626,6 +2632,7 @@ static inline u8 *wdev_address(struct wireless_dev *wdev) * wdev_priv - return wiphy priv from wireless_dev * * @wdev: The wireless device whose wiphy's priv pointer to return + * Return: The wiphy priv of @wdev. */ static inline void *wdev_priv(struct wireless_dev *wdev) { @@ -2643,12 +2650,14 @@ static inline void *wdev_priv(struct wireless_dev *wdev) * ieee80211_channel_to_frequency - convert channel number to frequency * @chan: channel number * @band: band, necessary due to channel number overlap + * Return: The corresponding frequency (in MHz), or 0 if the conversion failed. */ extern int ieee80211_channel_to_frequency(int chan, enum ieee80211_band band); /** * ieee80211_frequency_to_channel - convert frequency to channel number * @freq: center frequency + * Return: The corresponding channel, or 0 if the conversion failed. */ extern int ieee80211_frequency_to_channel(int freq); @@ -2665,6 +2674,7 @@ extern struct ieee80211_channel *__ieee80211_get_channel(struct wiphy *wiphy, * ieee80211_get_channel - get channel struct from wiphy for specified frequency * @wiphy: the struct wiphy to get the channel for * @freq: the center frequency of the channel + * Return: The channel struct from @wiphy at @freq. */ static inline struct ieee80211_channel * ieee80211_get_channel(struct wiphy *wiphy, int freq) @@ -2679,10 +2689,10 @@ ieee80211_get_channel(struct wiphy *wiphy, int freq) * @basic_rates: bitmap of basic rates * @bitrate: the bitrate for which to find the basic rate * - * This function returns the basic rate corresponding to a given - * bitrate, that is the next lower bitrate contained in the basic - * rate map, which is, for this function, given as a bitmap of - * indices of rates in the band's bitrate table. + * Return: The basic rate corresponding to a given bitrate, that + * is the next lower bitrate contained in the basic rate map, + * which is, for this function, given as a bitmap of indices of + * rates in the band's bitrate table. */ struct ieee80211_rate * ieee80211_get_response_rate(struct ieee80211_supported_band *sband, @@ -2775,18 +2785,21 @@ extern const unsigned char bridge_tunnel_header[6]; /** * ieee80211_get_hdrlen_from_skb - get header length from data * + * @skb: the frame + * * Given an skb with a raw 802.11 header at the data pointer this function - * returns the 802.11 header length in bytes (not including encryption - * headers). If the data in the sk_buff is too short to contain a valid 802.11 - * header the function returns 0. + * returns the 802.11 header length. * - * @skb: the frame + * Return: The 802.11 header length in bytes (not including encryption + * headers). Or 0 if the data in the sk_buff is too short to contain a valid + * 802.11 header. */ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); /** * ieee80211_hdrlen - get header length in bytes from frame control * @fc: frame control field in little-endian format + * Return: The header length in bytes. */ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); @@ -2794,7 +2807,7 @@ unsigned int __attribute_const__ ieee80211_hdrlen(__le16 fc); * ieee80211_get_mesh_hdrlen - get mesh extension header length * @meshhdr: the mesh extension header, only the flags field * (first byte) will be accessed - * Returns the length of the extension header, which is always at + * Return: The length of the extension header, which is always at * least 6 bytes and at most 18 if address 5 and 6 are present. */ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); @@ -2812,6 +2825,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr); * @skb: the 802.11 data frame * @addr: the device MAC address * @iftype: the virtual interface type + * Return: 0 on success. Non-zero on error. */ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype); @@ -2823,6 +2837,7 @@ int ieee80211_data_to_8023(struct sk_buff *skb, const u8 *addr, * @iftype: the virtual interface type * @bssid: the network bssid (used only for iftype STATION and ADHOC) * @qos: build 802.11 QoS data frame + * Return: 0 on success, or a negative error code. */ int ieee80211_data_from_8023(struct sk_buff *skb, const u8 *addr, enum nl80211_iftype iftype, u8 *bssid, bool qos); @@ -2850,6 +2865,7 @@ void ieee80211_amsdu_to_8023s(struct sk_buff *skb, struct sk_buff_head *list, /** * cfg80211_classify8021d - determine the 802.1p/1d tag for a data frame * @skb: the data frame + * Return: The 802.1p/1d tag. */ unsigned int cfg80211_classify8021d(struct sk_buff *skb); @@ -2860,12 +2876,13 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb); * @ies: data consisting of IEs * @len: length of data * - * This function will return %NULL if the element ID could - * not be found or if the element is invalid (claims to be - * longer than the given data), or a pointer to the first byte - * of the requested element, that is the byte containing the - * element ID. There are no checks on the element length - * other than having to fit into the given data. + * Return: %NULL if the element ID could not be found or if + * the element is invalid (claims to be longer than the given + * data), or a pointer to the first byte of the requested + * element, that is the byte containing the element ID. + * + * Note: There are no checks on the element length other than + * having to fit into the given data. */ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); @@ -2877,12 +2894,13 @@ const u8 *cfg80211_find_ie(u8 eid, const u8 *ies, int len); * @ies: data consisting of IEs * @len: length of data * - * This function will return %NULL if the vendor specific element ID - * could not be found or if the element is invalid (claims to be - * longer than the given data), or a pointer to the first byte - * of the requested element, that is the byte containing the - * element ID. There are no checks on the element length - * other than having to fit into the given data. + * Return: %NULL if the vendor specific element ID could not be found or if the + * element is invalid (claims to be longer than the given data), or a pointer to + * the first byte of the requested element, that is the byte containing the + * element ID. + * + * Note: There are no checks on the element length other than having to fit into + * the given data. */ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, const u8 *ies, int len); @@ -2915,6 +2933,8 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, * * Drivers should check the return value, its possible you can get * an -ENOMEM. + * + * Return: 0 on success. -ENOMEM. */ extern int regulatory_hint(struct wiphy *wiphy, const char *alpha2); @@ -2944,13 +2964,13 @@ extern void wiphy_apply_custom_regulatory( * it wants to follow we respect that unless a country IE has been received * and processed already. * - * When an error occurs, for example if no rule can be found, the return value - * is encoded using ERR_PTR(). Use IS_ERR() to check and PTR_ERR() to obtain - * the numeric return value. The numeric return value will be -ERANGE if we - * determine the given center_freq does not even have a regulatory rule for a - * frequency range in the center_freq's band. See freq_in_rule_band() for our - * current definition of a band -- this is purely subjective and right now it's - * 802.11 specific. + * Return: A valid pointer, or, when an error occurs, for example if no rule + * can be found, the return value is encoded using ERR_PTR(). Use IS_ERR() to + * check and PTR_ERR() to obtain the numeric return value. The numeric return + * value will be -ERANGE if we determine the given center_freq does not even + * have a regulatory rule for a frequency range in the center_freq's band. + * See freq_in_rule_band() for our current definition of a band -- this is + * purely subjective and right now it's 802.11 specific. */ const struct ieee80211_reg_rule *freq_reg_info(struct wiphy *wiphy, u32 center_freq); @@ -3000,7 +3020,8 @@ void cfg80211_sched_scan_stopped(struct wiphy *wiphy); * This informs cfg80211 that BSS information was found and * the BSS should be updated/added. * - * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()! + * Return: A referenced struct, must be released with cfg80211_put_bss()! + * Or %NULL on error. */ struct cfg80211_bss * __must_check cfg80211_inform_bss_frame(struct wiphy *wiphy, @@ -3025,7 +3046,8 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, * This informs cfg80211 that BSS information was found and * the BSS should be updated/added. * - * NOTE: Returns a referenced struct, must be released with cfg80211_put_bss()! + * Return: A referenced struct, must be released with cfg80211_put_bss()! + * Or %NULL on error. */ struct cfg80211_bss * __must_check cfg80211_inform_bss(struct wiphy *wiphy, @@ -3302,16 +3324,18 @@ void wiphy_rfkill_stop_polling(struct wiphy *wiphy); * the testmode command. Since it is intended for a reply, calling * it outside of the @testmode_cmd operation is invalid. * - * The returned skb (or %NULL if any errors happen) is pre-filled - * with the wiphy index and set up in a way that any data that is - * put into the skb (with skb_put(), nla_put() or similar) will end - * up being within the %NL80211_ATTR_TESTDATA attribute, so all that - * needs to be done with the skb is adding data for the corresponding - * userspace tool which can then read that data out of the testdata - * attribute. You must not modify the skb in any other way. + * The returned skb is pre-filled with the wiphy index and set up in + * a way that any data that is put into the skb (with skb_put(), + * nla_put() or similar) will end up being within the + * %NL80211_ATTR_TESTDATA attribute, so all that needs to be done + * with the skb is adding data for the corresponding userspace tool + * which can then read that data out of the testdata attribute. You + * must not modify the skb in any other way. * * When done, call cfg80211_testmode_reply() with the skb and return * its error code as the result of the @testmode_cmd operation. + * + * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, int approxlen); @@ -3321,11 +3345,12 @@ struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy, * @skb: The skb, must have been allocated with * cfg80211_testmode_alloc_reply_skb() * - * Returns an error code or 0 on success, since calling this - * function will usually be the last thing before returning - * from the @testmode_cmd you should return the error code. - * Note that this function consumes the skb regardless of the - * return value. + * Since calling this function will usually be the last thing + * before returning from the @testmode_cmd you should return + * the error code. Note that this function consumes the skb + * regardless of the return value. + * + * Return: An error code or 0 on success. */ int cfg80211_testmode_reply(struct sk_buff *skb); @@ -3339,14 +3364,16 @@ int cfg80211_testmode_reply(struct sk_buff *skb); * This function allocates and pre-fills an skb for an event on the * testmode multicast group. * - * The returned skb (or %NULL if any errors happen) is set up in the - * same way as with cfg80211_testmode_alloc_reply_skb() but prepared - * for an event. As there, you should simply add data to it that will - * then end up in the %NL80211_ATTR_TESTDATA attribute. Again, you must - * not modify the skb in any other way. + * The returned skb is set up in the same way as with + * cfg80211_testmode_alloc_reply_skb() but prepared for an event. As + * there, you should simply add data to it that will then end up in the + * %NL80211_ATTR_TESTDATA attribute. Again, you must not modify the skb + * in any other way. * * When done filling the skb, call cfg80211_testmode_event() with the * skb to send the event. + * + * Return: An allocated and pre-filled skb. %NULL if any errors happen. */ struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy, int approxlen, gfp_t gfp); @@ -3527,13 +3554,13 @@ void cfg80211_conn_failed(struct net_device *dev, const u8 *mac_addr, * @len: length of the frame data * @gfp: context flags * - * Returns %true if a user space application has registered for this frame. + * This function is called whenever an Action frame is received for a station + * mode interface, but is not processed in kernel. + * + * Return: %true if a user space application has registered for this frame. * For action frames, that makes it responsible for rejecting unrecognized * action frames; %false otherwise, in which case for action frames the * driver is responsible for rejecting the frame. - * - * This function is called whenever an Action frame is received for a station - * mode interface, but is not processed in kernel. */ bool cfg80211_rx_mgmt(struct wireless_dev *wdev, int freq, int sig_dbm, const u8 *buf, size_t len, gfp_t gfp); @@ -3625,7 +3652,7 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, * This function is used in AP mode (only!) to inform userspace that * a spurious class 3 frame was received, to be able to deauth the * sender. - * Returns %true if the frame was passed to userspace (or this failed + * Return: %true if the frame was passed to userspace (or this failed * for a reason other than not having a subscription.) */ bool cfg80211_rx_spurious_frame(struct net_device *dev, @@ -3641,7 +3668,7 @@ bool cfg80211_rx_spurious_frame(struct net_device *dev, * an associated station sent a 4addr frame but that wasn't expected. * It is allowed and desirable to send this event only once for each * station to avoid event flooding. - * Returns %true if the frame was passed to userspace (or this failed + * Return: %true if the frame was passed to userspace (or this failed * for a reason other than not having a subscription.) */ bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, @@ -3679,8 +3706,8 @@ void cfg80211_report_obss_beacon(struct wiphy *wiphy, * @wiphy: the wiphy * @chandef: the channel definition * - * This function returns true if there is no secondary channel or the secondary - * channel(s) can be used for beaconing (i.e. is not a radar channel etc.) + * Return: %true if there is no secondary channel or the secondary channel(s) + * can be used for beaconing (i.e. is not a radar channel etc.) */ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, struct cfg80211_chan_def *chandef); @@ -3750,9 +3777,9 @@ void cfg80211_unregister_wdev(struct wireless_dev *wdev); * The function finds a given P2P attribute in the (vendor) IEs and * copies its contents to the given buffer. * - * The return value is a negative error code (-%EILSEQ or -%ENOENT) if - * the data is malformed or the attribute can't be found (respectively), - * or the length of the found attribute (which can be zero). + * Return: A negative error code (-%EILSEQ or -%ENOENT) if the data is + * malformed or the attribute can't be found (respectively), or the + * length of the found attribute (which can be zero). */ int cfg80211_get_p2p_attr(const u8 *ies, unsigned int len, enum ieee80211_p2p_attr_id attr, diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 23daed3c78ed..79bc8709e83b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1522,6 +1522,8 @@ struct ieee80211_hw { * structure can then access it via hw->priv. Note that mac802111 drivers should * not use wiphy_priv() to try to get their private driver structure as this * is already used internally by mac80211. + * + * Return: The mac80211 driver hw struct of @wiphy. */ struct ieee80211_hw *wiphy_to_ieee80211_hw(struct wiphy *wiphy); @@ -2673,6 +2675,8 @@ struct ieee80211_ops { * * @priv_data_len: length of private data * @ops: callbacks for this device + * + * Return: A pointer to the new hardware device, or %NULL on error. */ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, const struct ieee80211_ops *ops); @@ -2685,6 +2689,8 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, * need to fill the contained wiphy's information. * * @hw: the device to register as returned by ieee80211_alloc_hw() + * + * Return: 0 on success. An error code otherwise. */ int ieee80211_register_hw(struct ieee80211_hw *hw); @@ -2731,6 +2737,8 @@ extern char *__ieee80211_create_tpt_led_trigger( * of the trigger so you can automatically link the LED device. * * @hw: the hardware to get the LED trigger name for + * + * Return: The name of the LED trigger. %NULL if not configured for LEDs. */ static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw) { @@ -2750,6 +2758,8 @@ static inline char *ieee80211_get_tx_led_name(struct ieee80211_hw *hw) * of the trigger so you can automatically link the LED device. * * @hw: the hardware to get the LED trigger name for + * + * Return: The name of the LED trigger. %NULL if not configured for LEDs. */ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw) { @@ -2769,6 +2779,8 @@ static inline char *ieee80211_get_rx_led_name(struct ieee80211_hw *hw) * of the trigger so you can automatically link the LED device. * * @hw: the hardware to get the LED trigger name for + * + * Return: The name of the LED trigger. %NULL if not configured for LEDs. */ static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw) { @@ -2788,6 +2800,8 @@ static inline char *ieee80211_get_assoc_led_name(struct ieee80211_hw *hw) * of the trigger so you can automatically link the LED device. * * @hw: the hardware to get the LED trigger name for + * + * Return: The name of the LED trigger. %NULL if not configured for LEDs. */ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw) { @@ -2805,9 +2819,10 @@ static inline char *ieee80211_get_radio_led_name(struct ieee80211_hw *hw) * @blink_table: the blink table -- needs to be ordered by throughput * @blink_table_len: size of the blink table * - * This function returns %NULL (in case of error, or if no LED - * triggers are configured) or the name of the new trigger. - * This function must be called before ieee80211_register_hw(). + * Return: %NULL (in case of error, or if no LED triggers are + * configured) or the name of the new trigger. + * + * Note: This function must be called before ieee80211_register_hw(). */ static inline char * ieee80211_create_tpt_led_trigger(struct ieee80211_hw *hw, unsigned int flags, @@ -2940,10 +2955,10 @@ static inline void ieee80211_rx_ni(struct ieee80211_hw *hw, * Calls to this function for a single hardware must be synchronized against * each other. * - * The function returns -EINVAL when the requested PS mode is already set. - * * @sta: currently connected sta * @start: start or stop PS + * + * Return: 0 on success. -EINVAL when the requested PS mode is already set. */ int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start); @@ -2957,6 +2972,8 @@ int ieee80211_sta_ps_transition(struct ieee80211_sta *sta, bool start); * * @sta: currently connected sta * @start: start or stop PS + * + * Return: Like ieee80211_sta_ps_transition(). */ static inline int ieee80211_sta_ps_transition_ni(struct ieee80211_sta *sta, bool start) @@ -3094,6 +3111,8 @@ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets); * according to the current DTIM parameters/TIM bitmap. * * The driver is responsible for freeing the returned skb. + * + * Return: The beacon template. %NULL on error. */ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -3105,6 +3124,8 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from the add_interface callback. * * See ieee80211_beacon_get_tim(). + * + * Return: See ieee80211_beacon_get_tim(). */ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif) @@ -3121,6 +3142,8 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, * hardware. The destination address should be set by the caller. * * Can only be called in AP mode. + * + * Return: The Probe Response template. %NULL on error. */ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -3136,6 +3159,8 @@ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, * * Note: Caller (or hardware) is responsible for setting the * &IEEE80211_FCTL_PM bit. + * + * Return: The PS Poll template. %NULL on error. */ struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -3151,6 +3176,8 @@ struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw, * * Note: Caller (or hardware) is responsible for setting the * &IEEE80211_FCTL_PM bit as well as Duration and Sequence Control fields. + * + * Return: The nullfunc template. %NULL on error. */ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -3165,6 +3192,8 @@ struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, * * Creates a Probe Request template which can, for example, be uploaded to * hardware. + * + * Return: The Probe Request template. %NULL on error. */ struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -3200,6 +3229,8 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, * If the RTS is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive * the duration field value in little-endian byteorder. + * + * Return: The duration. */ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, @@ -3235,6 +3266,8 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, * If the CTS-to-self is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive * the duration field value in little-endian byteorder. + * + * Return: The duration. */ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -3251,6 +3284,8 @@ __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, * * Calculate the duration field of some generic frame, given its * length and transmission rate (in 100kbps). + * + * Return: The duration. */ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -3267,9 +3302,10 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, * hardware/firmware does not implement buffering of broadcast/multicast * frames when power saving is used, 802.11 code buffers them in the host * memory. The low-level driver uses this function to fetch next buffered - * frame. In most cases, this is used when generating beacon frame. This - * function returns a pointer to the next buffered skb or NULL if no more - * buffered frames are available. + * frame. In most cases, this is used when generating beacon frame. + * + * Return: A pointer to the next buffered skb or NULL if no more buffered + * frames are available. * * Note: buffered frames are returned only after DTIM beacon frame was * generated with ieee80211_beacon_get() and the low-level driver must thus @@ -3449,6 +3485,8 @@ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue); * @queue: queue number (counted from zero). * * Drivers should use this function instead of netif_stop_queue. + * + * Return: %true if the queue is stopped. %false otherwise. */ int ieee80211_queue_stopped(struct ieee80211_hw *hw, int queue); @@ -3646,7 +3684,9 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_vif *vif, const u8 *ra, * @vif: virtual interface to look for station on * @addr: station's address * - * This function must be called under RCU lock and the + * Return: The station, if found. %NULL otherwise. + * + * Note: This function must be called under RCU lock and the * resulting pointer is only valid under RCU lock as well. */ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, @@ -3659,7 +3699,9 @@ struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, * @addr: remote station's address * @localaddr: local address (vif->sdata->vif.addr). Use NULL for 'any'. * - * This function must be called under RCU lock and the + * Return: The station, if found. %NULL otherwise. + * + * Note: This function must be called under RCU lock and the * resulting pointer is only valid under RCU lock as well. * * NOTE: You may pass NULL for localaddr, but then you will just get @@ -3789,7 +3831,9 @@ void ieee80211_iter_chan_contexts_atomic( * information. This function must only be called from within the * .bss_info_changed callback function and only in managed mode. The function * is only useful when the interface is associated, otherwise it will return - * NULL. + * %NULL. + * + * Return: The Probe Request template. %NULL on error. */ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif); @@ -4136,12 +4180,14 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif, void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif); /** - * ieee80211_ave_rssi - report the average rssi for the specified interface + * ieee80211_ave_rssi - report the average RSSI for the specified interface * * @vif: the specified virtual interface * - * This function return the average rssi value for the requested interface. - * It assumes that the given vif is valid. + * Note: This function assumes that the given vif is valid. + * + * Return: The average RSSI value for the requested interface, or 0 if not + * applicable. */ int ieee80211_ave_rssi(struct ieee80211_vif *vif); -- cgit v1.2.3 From d888130a024d1d1e8b2c3d0c9841a218fc0aed9e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 10 Jan 2013 23:55:33 +0100 Subject: mac80211: fix resume from WoWLAN My commit 529ba6e9313dbe60dab7e72c6fdf647a012e9f5b ("mac80211: clean up association better in suspend") introduced a bug when resuming from WoWLAN when a device reset is desired. This case must not use the suspend_bss_conf as it hasn't been stored. Signed-off-by: Johannes Berg --- net/mac80211/util.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 1b9420730d8c..0ad51e14f3c8 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1358,8 +1358,9 @@ int ieee80211_reconfig(struct ieee80211_local *local) struct ieee80211_chanctx *ctx; struct sta_info *sta; int res, i; - #ifdef CONFIG_PM + bool reconfig_due_to_wowlan = false; + if (local->suspended) local->resuming = true; @@ -1377,6 +1378,7 @@ int ieee80211_reconfig(struct ieee80211_local *local) * res is 1, which means the driver requested * to go through a regular reset on wakeup. */ + reconfig_due_to_wowlan = true; } #endif /* everything else happens only if HW was up & running */ @@ -1527,7 +1529,7 @@ int ieee80211_reconfig(struct ieee80211_local *local) BSS_CHANGED_TXPOWER; #ifdef CONFIG_PM - if (local->resuming) + if (local->resuming && !reconfig_due_to_wowlan) sdata->vif.bss_conf = sdata->suspend_bss_conf; #endif -- cgit v1.2.3 From 8f21b0adfe95907926da1bb0bcd3382b13d0143d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 11 Jan 2013 00:28:01 +0100 Subject: mac80211: call restart complete at wowlan resume time When the driver's resume function can't completely restore the configuration in the device, it returns 1 from the callback which will be treated like a HW restart request, but done directly. In this case, also call the driver's restart_complete() function so it can finish the reconfiguration there. Signed-off-by: Johannes Berg --- include/net/mac80211.h | 5 ++++- net/mac80211/util.c | 7 ++++--- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 79bc8709e83b..3037f49e51c8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2488,7 +2488,10 @@ enum ieee80211_rate_control_changed { * * @restart_complete: Called after a call to ieee80211_restart_hw(), when the * reconfiguration has completed. This can help the driver implement the - * reconfiguration step. This callback may sleep. + * reconfiguration step. Also called when reconfiguring because the + * driver's resume function returned 1, as this is just like an "inline" + * hardware restart. This callback may sleep. + * */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 0ad51e14f3c8..7519018ff71a 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1358,9 +1358,9 @@ int ieee80211_reconfig(struct ieee80211_local *local) struct ieee80211_chanctx *ctx; struct sta_info *sta; int res, i; -#ifdef CONFIG_PM bool reconfig_due_to_wowlan = false; +#ifdef CONFIG_PM if (local->suspended) local->resuming = true; @@ -1656,10 +1656,11 @@ int ieee80211_reconfig(struct ieee80211_local *local) * If this is for hw restart things are still running. * We may want to change that later, however. */ - if (!local->suspended) { + if (!local->suspended || reconfig_due_to_wowlan) drv_restart_complete(local); + + if (!local->suspended) return 0; - } #ifdef CONFIG_PM /* first set suspended false, then resuming */ -- cgit v1.2.3 From ee1f668136b2fb6640ee2d54c2a525ea41f98211 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Thu, 10 Jan 2013 23:31:54 +0800 Subject: mac80211: allow disable power save in mesh Allow mesh interface to disable the power save which is by default turn on in certain chipset. Testing with 2 units of ZCN-1523H-5-16 featuring AR9280 chipset which have power save enabled by default. Constant reset if the average signal of the peer mesh STA is below -80 dBm and power save is enabled. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 7d290bce0927..817992b51fe7 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2232,7 +2232,8 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); - if (sdata->vif.type != NL80211_IFTYPE_STATION) + if (sdata->vif.type != NL80211_IFTYPE_STATION && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT) return -EOPNOTSUPP; if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) -- cgit v1.2.3 From ea54fba20985b7a0cb8e1c8e2760a0865ee47763 Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:48 +0100 Subject: nl80211: add range checks to mesh parameters Ranges are taken from IEEE 802.11-2012, common sense or current implementation requirements. Signed-off-by: Marco Porsch Acked-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 79 ++++++++++++++++++++++++++++---------------------- 1 file changed, 44 insertions(+), 35 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 9bd8340af999..ceb27fda9ec5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3981,13 +3981,15 @@ static int nl80211_parse_mesh_config(struct genl_info *info, struct nlattr *tb[NL80211_MESHCONF_ATTR_MAX + 1]; u32 mask = 0; -#define FILL_IN_MESH_PARAM_IF_SET(table, cfg, param, mask, attr_num, nla_fn) \ -do {\ - if (table[attr_num]) {\ - cfg->param = nla_fn(table[attr_num]); \ - mask |= (1 << (attr_num - 1)); \ - } \ -} while (0);\ +#define FILL_IN_MESH_PARAM_IF_SET(tb, cfg, param, min, max, mask, attr, fn) \ +do { \ + if (tb[attr]) { \ + if (fn(tb[attr]) < min || fn(tb[attr]) > max) \ + return -EINVAL; \ + cfg->param = fn(tb[attr]); \ + mask |= (1 << (attr - 1)); \ + } \ +} while (0) if (!info->attrs[NL80211_ATTR_MESH_CONFIG]) @@ -4002,81 +4004,88 @@ do {\ BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32); /* Fill in the params struct */ - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout, 1, 255, mask, NL80211_MESHCONF_RETRY_TIMEOUT, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout, 1, 255, mask, NL80211_MESHCONF_CONFIRM_TIMEOUT, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout, 1, 255, mask, NL80211_MESHCONF_HOLDING_TIMEOUT, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks, 0, 255, mask, NL80211_MESHCONF_MAX_PEER_LINKS, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries, 0, 16, mask, NL80211_MESHCONF_MAX_RETRIES, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL, 1, 255, mask, NL80211_MESHCONF_TTL, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, element_ttl, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, element_ttl, 1, 255, mask, NL80211_MESHCONF_ELEMENT_TTL, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks, 0, 1, mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor, mask, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor, + 1, 255, mask, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, nla_get_u32); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries, 0, 255, mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time, 1, 65535, mask, NL80211_MESHCONF_PATH_REFRESH_TIME, nla_get_u32); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout, 1, 65535, mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout, mask, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout, + 1, 65535, mask, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, nla_get_u32); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPpreqMinInterval, - mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, + 1, 65535, mask, + NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPperrMinInterval, - mask, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, + 1, 65535, mask, + NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, - dot11MeshHWMPnetDiameterTraversalTime, mask, + dot11MeshHWMPnetDiameterTraversalTime, + 1, 65535, mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRootMode, mask, - NL80211_MESHCONF_HWMP_ROOTMODE, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRannInterval, mask, - NL80211_MESHCONF_HWMP_RANN_INTERVAL, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRootMode, 0, 4, + mask, NL80211_MESHCONF_HWMP_ROOTMODE, + nla_get_u8); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRannInterval, 1, 65535, + mask, NL80211_MESHCONF_HWMP_RANN_INTERVAL, nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, - dot11MeshGateAnnouncementProtocol, mask, - NL80211_MESHCONF_GATE_ANNOUNCEMENTS, + dot11MeshGateAnnouncementProtocol, 0, 1, + mask, NL80211_MESHCONF_GATE_ANNOUNCEMENTS, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshForwarding, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshForwarding, 0, 1, mask, NL80211_MESHCONF_FORWARDING, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold, 1, 255, mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_u32); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode, 0, 16, mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathToRootTimeout, - mask, + 1, 65535, mask, NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, nla_get_u32); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMProotInterval, + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMProotInterval, 1, 65535, mask, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, - dot11MeshHWMPconfirmationInterval, mask, + dot11MeshHWMPconfirmationInterval, + 1, 65535, mask, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, nla_get_u16); if (mask_out) -- cgit v1.2.3 From 1617bab8db81427392d424f2c7ffb5a3282c417c Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:49 +0100 Subject: mac80211: update mesh peer link counter during userspace peering The established peer link count is indicated in mesh beacons and used for other internal tasks. Previously it was not updated when authenticated peering is performed in userspace. Signed-off-by: Marco Porsch Acked-by: Thomas Pedersen Signed-off-by: Johannes Berg --- net/mac80211/cfg.c | 22 +++++++++++++++++++--- net/mac80211/mesh.h | 14 ++++++++++++++ net/mac80211/mesh_plink.c | 14 -------------- 3 files changed, 33 insertions(+), 17 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 817992b51fe7..8a91dd22d571 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1243,18 +1243,33 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH - if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) + if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) { + u32 changed = 0; + switch (params->plink_state) { - case NL80211_PLINK_LISTEN: case NL80211_PLINK_ESTAB: + if (sta->plink_state != NL80211_PLINK_ESTAB) + changed = mesh_plink_inc_estab_count( + sdata); + sta->plink_state = params->plink_state; + break; + case NL80211_PLINK_LISTEN: case NL80211_PLINK_BLOCKED: + case NL80211_PLINK_OPN_SNT: + case NL80211_PLINK_OPN_RCVD: + case NL80211_PLINK_CNF_RCVD: + case NL80211_PLINK_HOLDING: + if (sta->plink_state == NL80211_PLINK_ESTAB) + changed = mesh_plink_dec_estab_count( + sdata); sta->plink_state = params->plink_state; break; default: /* nothing */ break; } - else + ieee80211_bss_info_change_notify(sdata, changed); + } else { switch (params->plink_action) { case PLINK_ACTION_OPEN: mesh_plink_open(sta); @@ -1263,6 +1278,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, mesh_plink_block(sta); break; } + } #endif } diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 84c28c6101cd..c07f6fc63dc6 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -307,6 +307,20 @@ extern int mesh_paths_generation; #ifdef CONFIG_MAC80211_MESH extern int mesh_allocated; +static inline +u32 mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata) +{ + atomic_inc(&sdata->u.mesh.estab_plinks); + return mesh_accept_plinks_update(sdata); +} + +static inline +u32 mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata) +{ + atomic_dec(&sdata->u.mesh.estab_plinks); + return mesh_accept_plinks_update(sdata); +} + static inline int mesh_plink_free_count(struct ieee80211_sub_if_data *sdata) { return sdata->u.mesh.mshcfg.dot11MeshMaxPeerLinks - diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 4b274e9c91a5..9e0416696a83 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -41,20 +41,6 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, enum ieee80211_self_protected_actioncode action, u8 *da, __le16 llid, __le16 plid, __le16 reason); -static inline -u32 mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata) -{ - atomic_inc(&sdata->u.mesh.estab_plinks); - return mesh_accept_plinks_update(sdata); -} - -static inline -u32 mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata) -{ - atomic_dec(&sdata->u.mesh.estab_plinks); - return mesh_accept_plinks_update(sdata); -} - /** * mesh_plink_fsm_restart - restart a mesh peer link finite state machine * -- cgit v1.2.3 From eac70c135def117849faa7cc8b7ccb941498085f Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:50 +0100 Subject: mac80211: move add_tim to subfunction This functions will be used for mesh beacons, too. Signed-off-by: Marco Porsch [some formatting fixes] Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 47 ++++++++++++++++++++++++++++------------------- 1 file changed, 28 insertions(+), 19 deletions(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index e9eadc40c09c..0d7381679a5c 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2261,9 +2261,8 @@ void ieee80211_tx_pending(unsigned long data) /* functions for drivers to get certain frames */ -static void ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, - struct ps_data *ps, - struct sk_buff *skb) +static void __ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, + struct ps_data *ps, struct sk_buff *skb) { u8 *pos, *tim; int aid0 = 0; @@ -2325,6 +2324,31 @@ static void ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, } } +static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, + struct ps_data *ps, struct sk_buff *skb) +{ + struct ieee80211_local *local = sdata->local; + + /* + * Not very nice, but we want to allow the driver to call + * ieee80211_beacon_get() as a response to the set_tim() + * callback. That, however, is already invoked under the + * sta_lock to guarantee consistent and race-free update + * of the tim bitmap in mac80211 and the driver. + */ + if (local->tim_in_locked_section) { + __ieee80211_beacon_add_tim(sdata, ps, skb); + } else { + unsigned long flags; + + spin_lock_irqsave(&local->tim_lock, flags); + __ieee80211_beacon_add_tim(sdata, ps, skb); + spin_unlock_irqrestore(&local->tim_lock, flags); + } + + return 0; +} + struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 *tim_offset, u16 *tim_length) @@ -2369,22 +2393,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, memcpy(skb_put(skb, beacon->head_len), beacon->head, beacon->head_len); - /* - * Not very nice, but we want to allow the driver to call - * ieee80211_beacon_get() as a response to the set_tim() - * callback. That, however, is already invoked under the - * sta_lock to guarantee consistent and race-free update - * of the tim bitmap in mac80211 and the driver. - */ - if (local->tim_in_locked_section) { - ieee80211_beacon_add_tim(sdata, &ap->ps, skb); - } else { - unsigned long flags; - - spin_lock_irqsave(&local->tim_lock, flags); - ieee80211_beacon_add_tim(sdata, &ap->ps, skb); - spin_unlock_irqrestore(&local->tim_lock, flags); - } + ieee80211_beacon_add_tim(sdata, &ap->ps, skb); if (tim_offset) *tim_offset = beacon->head_len; -- cgit v1.2.3 From 9bdbf04db099c11bbbaea9dcea7465c508531fb8 Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:51 +0100 Subject: {cfg,nl,mac}80211: set beacon interval and DTIM period on mesh join Move the default mesh beacon interval and DTIM period to cfg80211 and make them accessible to nl80211. This enables setting both values when joining an MBSS. Previously the DTIM parameter was not set by mac80211 so the driver's default value was used. Signed-off-by: Marco Porsch Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++++ net/mac80211/cfg.c | 3 +++ net/mac80211/mesh.c | 1 - net/mac80211/mesh.h | 2 -- net/wireless/mesh.c | 5 +++++ net/wireless/nl80211.c | 15 +++++++++++++++ 6 files changed, 27 insertions(+), 3 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3d8717a0d3b2..516aded3697f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1036,6 +1036,8 @@ struct mesh_config { * @ie_len: length of vendor information elements * @is_authenticated: this mesh requires authentication * @is_secure: this mesh uses security + * @dtim_period: DTIM period to use + * @beacon_interval: beacon interval to use * @mcast_rate: multicat rate for Mesh Node [6Mbps is the default for 802.11a] * * These parameters are fixed when the mesh is created. @@ -1051,6 +1053,8 @@ struct mesh_setup { u8 ie_len; bool is_authenticated; bool is_secure; + u8 dtim_period; + u16 beacon_interval; int mcast_rate[IEEE80211_NUM_BANDS]; }; diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8a91dd22d571..36aa65f495ff 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1666,6 +1666,9 @@ static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh, memcpy(sdata->vif.bss_conf.mcast_rate, setup->mcast_rate, sizeof(setup->mcast_rate)); + sdata->vif.bss_conf.beacon_int = setup->beacon_interval; + sdata->vif.bss_conf.dtim_period = setup->dtim_period; + return 0; } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 245885841c8d..694e27376afa 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -625,7 +625,6 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) ieee80211_queue_work(&local->hw, &sdata->work); sdata->vif.bss_conf.ht_operation_mode = ifmsh->mshcfg.ht_opmode; - sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; sdata->vif.bss_conf.enable_beacon = true; sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index c07f6fc63dc6..aff301544c7f 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -191,8 +191,6 @@ struct mesh_rmc { #define IEEE80211_MESH_PEER_INACTIVITY_LIMIT (1800 * HZ) #define IEEE80211_MESH_HOUSEKEEPING_INTERVAL (60 * HZ) -#define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units */ - #define MESH_PATH_EXPIRE (600 * HZ) /* Default maximum number of plinks per interface */ diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index f9d6ce5cfabb..0fe8ceb5444e 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -44,6 +44,9 @@ #define MESH_SYNC_NEIGHBOR_OFFSET_MAX 50 +#define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units (=TUs) */ +#define MESH_DEFAULT_DTIM_PERIOD 2 + const struct mesh_config default_mesh_config = { .dot11MeshRetryTimeout = MESH_RET_T, .dot11MeshConfirmTimeout = MESH_CONF_T, @@ -79,6 +82,8 @@ const struct mesh_setup default_mesh_setup = { .ie = NULL, .ie_len = 0, .is_secure = false, + .beacon_interval = MESH_DEFAULT_BEACON_INTERVAL, + .dtim_period = MESH_DEFAULT_DTIM_PERIOD, }; int __cfg80211_join_mesh(struct cfg80211_registered_device *rdev, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index ceb27fda9ec5..d5842eb35aec 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -6669,6 +6669,21 @@ static int nl80211_join_mesh(struct sk_buff *skb, struct genl_info *info) nla_get_u32(info->attrs[NL80211_ATTR_MCAST_RATE]))) return -EINVAL; + if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) { + setup.beacon_interval = + nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]); + if (setup.beacon_interval < 10 || + setup.beacon_interval > 10000) + return -EINVAL; + } + + if (info->attrs[NL80211_ATTR_DTIM_PERIOD]) { + setup.dtim_period = + nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]); + if (setup.dtim_period < 1 || setup.dtim_period > 100) + return -EINVAL; + } + if (info->attrs[NL80211_ATTR_MESH_SETUP]) { /* parse additional setup parameters if given */ err = nl80211_parse_mesh_setup(info, &setup); -- cgit v1.2.3 From 3b1c5a5307fb5277f395efdcf330c064d79df07d Mon Sep 17 00:00:00 2001 From: Marco Porsch Date: Mon, 7 Jan 2013 16:04:52 +0100 Subject: {cfg,nl}80211: mesh power mode primitives and userspace access Add the nl80211_mesh_power_mode enumeration which holds possible values for the mesh power mode. These modes are unknown, active, light sleep and deep sleep. Add power_mode entry to the mesh config structure to hold the user-configured default mesh power mode. This value will be used for new peer links. Add the dot11MeshAwakeWindowDuration value to the mesh config. The awake window is a duration in TU describing how long the STA will stay awake after transmitting its beacon in PS mode. Add access routines to: - get/set local link-specific power mode (STA) - get remote STA's link-specific power mode (STA) - get remote STA's non-peer power mode (STA) - get/set default mesh power mode (mesh config) - get/set mesh awake window duration (mesh config) All config changes may be done at mesh runtime and take effect immediately. Signed-off-by: Marco Porsch Signed-off-by: Ivan Bezyazychnyy Signed-off-by: Mike Krinkin [fix commit message line length, error handling in set station] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 21 ++++++++++++++++++++ include/uapi/linux/nl80211.h | 47 ++++++++++++++++++++++++++++++++++++++++++++ net/wireless/mesh.c | 3 +++ net/wireless/nl80211.c | 43 +++++++++++++++++++++++++++++++++++++++- 4 files changed, 113 insertions(+), 1 deletion(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 516aded3697f..d9f08f65f7a5 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -610,6 +610,8 @@ enum station_parameters_apply_mask { * @sta_modify_mask: bitmap indicating which parameters changed * (for those that don't have a natural "no change" value), * see &enum station_parameters_apply_mask + * @local_pm: local link-specific mesh power save mode (no change when set + * to unknown) */ struct station_parameters { u8 *supported_rates; @@ -625,6 +627,7 @@ struct station_parameters { struct ieee80211_vht_cap *vht_capa; u8 uapsd_queues; u8 max_sp; + enum nl80211_mesh_power_mode local_pm; }; /** @@ -655,6 +658,9 @@ struct station_parameters { * @STATION_INFO_STA_FLAGS: @sta_flags filled * @STATION_INFO_BEACON_LOSS_COUNT: @beacon_loss_count filled * @STATION_INFO_T_OFFSET: @t_offset filled + * @STATION_INFO_LOCAL_PM: @local_pm filled + * @STATION_INFO_PEER_PM: @peer_pm filled + * @STATION_INFO_NONPEER_PM: @nonpeer_pm filled */ enum station_info_flags { STATION_INFO_INACTIVE_TIME = 1<<0, @@ -678,6 +684,9 @@ enum station_info_flags { STATION_INFO_STA_FLAGS = 1<<18, STATION_INFO_BEACON_LOSS_COUNT = 1<<19, STATION_INFO_T_OFFSET = 1<<20, + STATION_INFO_LOCAL_PM = 1<<21, + STATION_INFO_PEER_PM = 1<<22, + STATION_INFO_NONPEER_PM = 1<<23, }; /** @@ -791,6 +800,9 @@ struct sta_bss_parameters { * @sta_flags: station flags mask & values * @beacon_loss_count: Number of times beacon loss event has triggered. * @t_offset: Time offset of the station relative to this host. + * @local_pm: local mesh STA power save mode + * @peer_pm: peer mesh STA power save mode + * @nonpeer_pm: non-peer mesh STA power save mode */ struct station_info { u32 filled; @@ -820,6 +832,9 @@ struct station_info { u32 beacon_loss_count; s64 t_offset; + enum nl80211_mesh_power_mode local_pm; + enum nl80211_mesh_power_mode peer_pm; + enum nl80211_mesh_power_mode nonpeer_pm; /* * Note: Add a new enum station_info_flags value for each new field and @@ -995,6 +1010,10 @@ struct bss_parameters { * @dot11MeshHWMPconfirmationInterval: The minimum interval of time (in TUs) * during which a mesh STA can send only one Action frame containing * a PREQ element for root path confirmation. + * @power_mode: The default mesh power save mode which will be the initial + * setting for new peer links. + * @dot11MeshAwakeWindowDuration: The duration in TUs the STA will remain awake + * after transmitting its beacon. */ struct mesh_config { u16 dot11MeshRetryTimeout; @@ -1022,6 +1041,8 @@ struct mesh_config { u32 dot11MeshHWMPactivePathToRootTimeout; u16 dot11MeshHWMProotInterval; u16 dot11MeshHWMPconfirmationInterval; + enum nl80211_mesh_power_mode power_mode; + u16 dot11MeshAwakeWindowDuration; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 547017100a30..6c4f703ae890 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1310,6 +1310,9 @@ enum nl80211_commands { * if not given in START_AP 0 is assumed, if not given in SET_BSS * no change is made. * + * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode + * defined in &enum nl80211_mesh_power_mode. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1580,6 +1583,8 @@ enum nl80211_attrs { NL80211_ATTR_P2P_CTWINDOW, NL80211_ATTR_P2P_OPPPS, + NL80211_ATTR_LOCAL_MESH_POWER_MODE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1838,6 +1843,10 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) + * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode + * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode + * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards + * non-peer STA * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ @@ -1862,6 +1871,9 @@ enum nl80211_sta_info { NL80211_STA_INFO_STA_FLAGS, NL80211_STA_INFO_BEACON_LOSS, NL80211_STA_INFO_T_OFFSET, + NL80211_STA_INFO_LOCAL_PM, + NL80211_STA_INFO_PEER_PM, + NL80211_STA_INFO_NONPEER_PM, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, @@ -2252,6 +2264,34 @@ enum nl80211_mntr_flags { NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 }; +/** + * enum nl80211_mesh_power_mode - mesh power save modes + * + * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is + * not known or has not been set yet. + * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is + * in Awake state all the time. + * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will + * alternate between Active and Doze states, but will wake up for + * neighbor's beacons. + * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will + * alternate between Active and Doze states, but may not wake up + * for neighbor's beacons. + * + * @__NL80211_MESH_POWER_AFTER_LAST - internal use + * @NL80211_MESH_POWER_MAX - highest possible power save level + */ + +enum nl80211_mesh_power_mode { + NL80211_MESH_POWER_UNKNOWN, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_LIGHT_SLEEP, + NL80211_MESH_POWER_DEEP_SLEEP, + + __NL80211_MESH_POWER_AFTER_LAST, + NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 +}; + /** * enum nl80211_meshconf_params - mesh configuration parameters * @@ -2346,6 +2386,11 @@ enum nl80211_mntr_flags { * (in TUs) during which a mesh STA can send only one Action frame * containing a PREQ element for root path confirmation. * + * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. + * type &enum nl80211_mesh_power_mode (u32) + * + * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2375,6 +2420,8 @@ enum nl80211_meshconf_params { NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, + NL80211_MESHCONF_POWER_MODE, + NL80211_MESHCONF_AWAKE_WINDOW, /* keep last */ __NL80211_MESHCONF_ATTR_AFTER_LAST, diff --git a/net/wireless/mesh.c b/net/wireless/mesh.c index 0fe8ceb5444e..55957a284f6c 100644 --- a/net/wireless/mesh.c +++ b/net/wireless/mesh.c @@ -46,6 +46,7 @@ #define MESH_DEFAULT_BEACON_INTERVAL 1000 /* in 1024 us units (=TUs) */ #define MESH_DEFAULT_DTIM_PERIOD 2 +#define MESH_DEFAULT_AWAKE_WINDOW 10 /* in 1024 us units (=TUs) */ const struct mesh_config default_mesh_config = { .dot11MeshRetryTimeout = MESH_RET_T, @@ -72,6 +73,8 @@ const struct mesh_config default_mesh_config = { .dot11MeshHWMPactivePathToRootTimeout = MESH_PATH_TO_ROOT_TIMEOUT, .dot11MeshHWMProotInterval = MESH_ROOT_INTERVAL, .dot11MeshHWMPconfirmationInterval = MESH_ROOT_CONFIRMATION_INTERVAL, + .power_mode = NL80211_MESH_POWER_ACTIVE, + .dot11MeshAwakeWindowDuration = MESH_DEFAULT_AWAKE_WINDOW, }; const struct mesh_setup default_mesh_setup = { diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d5842eb35aec..1a7a710fe9bf 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3001,6 +3001,18 @@ static int nl80211_send_station(struct sk_buff *msg, u32 portid, u32 seq, nla_put_u32(msg, NL80211_STA_INFO_BEACON_LOSS, sinfo->beacon_loss_count)) goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_LOCAL_PM) && + nla_put_u32(msg, NL80211_STA_INFO_LOCAL_PM, + sinfo->local_pm)) + goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_PEER_PM) && + nla_put_u32(msg, NL80211_STA_INFO_PEER_PM, + sinfo->peer_pm)) + goto nla_put_failure; + if ((sinfo->filled & STATION_INFO_NONPEER_PM) && + nla_put_u32(msg, NL80211_STA_INFO_NONPEER_PM, + sinfo->nonpeer_pm)) + goto nla_put_failure; if (sinfo->filled & STATION_INFO_BSS_PARAM) { bss_param = nla_nest_start(msg, NL80211_STA_INFO_BSS_PARAM); if (!bss_param) @@ -3206,6 +3218,17 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) params.plink_state = nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_STATE]); + if (info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]) { + enum nl80211_mesh_power_mode pm = nla_get_u32( + info->attrs[NL80211_ATTR_LOCAL_MESH_POWER_MODE]); + + if (pm <= NL80211_MESH_POWER_UNKNOWN || + pm > NL80211_MESH_POWER_MAX) + return -EINVAL; + + params.local_pm = pm; + } + switch (dev->ieee80211_ptr->iftype) { case NL80211_IFTYPE_AP: case NL80211_IFTYPE_AP_VLAN: @@ -3213,6 +3236,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* disallow mesh-specific things */ if (params.plink_action) return -EINVAL; + if (params.local_pm) + return -EINVAL; /* TDLS can't be set, ... */ if (params.sta_flags_set & BIT(NL80211_STA_FLAG_TDLS_PEER)) @@ -3265,6 +3290,8 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* disallow things sta doesn't support */ if (params.plink_action) return -EINVAL; + if (params.local_pm) + return -EINVAL; /* reject any changes other than AUTHORIZED */ if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED)) return -EINVAL; @@ -3922,7 +3949,11 @@ static int nl80211_get_mesh_config(struct sk_buff *skb, nla_put_u16(msg, NL80211_MESHCONF_HWMP_ROOT_INTERVAL, cur_params.dot11MeshHWMProotInterval) || nla_put_u16(msg, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, - cur_params.dot11MeshHWMPconfirmationInterval)) + cur_params.dot11MeshHWMPconfirmationInterval) || + nla_put_u32(msg, NL80211_MESHCONF_POWER_MODE, + cur_params.power_mode) || + nla_put_u16(msg, NL80211_MESHCONF_AWAKE_WINDOW, + cur_params.dot11MeshAwakeWindowDuration)) goto nla_put_failure; nla_nest_end(msg, pinfoattr); genlmsg_end(msg, hdr); @@ -3961,6 +3992,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A [NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT] = { .type = NLA_U32 }, [NL80211_MESHCONF_HWMP_ROOT_INTERVAL] = { .type = NLA_U16 }, [NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL] = { .type = NLA_U16 }, + [NL80211_MESHCONF_POWER_MODE] = { .type = NLA_U32 }, + [NL80211_MESHCONF_AWAKE_WINDOW] = { .type = NLA_U16 }, }; static const struct nla_policy @@ -4088,6 +4121,14 @@ do { \ 1, 65535, mask, NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, nla_get_u16); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, power_mode, + NL80211_MESH_POWER_ACTIVE, + NL80211_MESH_POWER_MAX, + mask, NL80211_MESHCONF_POWER_MODE, + nla_get_u32); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshAwakeWindowDuration, + 0, 65535, mask, + NL80211_MESHCONF_AWAKE_WINDOW, nla_get_u16); if (mask_out) *mask_out = mask; -- cgit v1.2.3 From 1c18f1452a772dfe884ed25677bddb3ecaf9c43a Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 8 Jan 2013 10:17:27 +0100 Subject: nl80211: allow user-space to set address for P2P_DEVICE As per email discussion Jouni Malinen pointed out that: "P2P message exchanges can be executed on the current operating channel of any operation (both P2P and non-P2P station). These can be on 5 GHz and even on 60 GHz (so yes, you _can_ do GO Negotiation on 60 GHz). As an example, it would be possible to receive a GO Negotiation Request frame on a 5 GHz only radio and then to complete GO Negotiation on that band. This can happen both when connected to a P2P group (through client discoverability mechanism) and when connected to a legacy AP (assuming the station receive Probe Request frame from full scan in the beginning of P2P device discovery)." This means that P2P messages can be sent over different radio devices. However, these should use the same P2P device address so it should be able to provision this from user-space. This patch adds a parameter for this to struct vif_params which should only be used during creation of the P2P device interface. Cc: Jouni Malinen Cc: Greg Goldman Cc: Jithu Jance Signed-off-by: Arend van Spriel [add error checking] Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 4 ++++ net/wireless/nl80211.c | 7 +++++++ 2 files changed, 11 insertions(+) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d9f08f65f7a5..d81e730962cc 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -281,9 +281,13 @@ struct ieee80211_supported_band { /** * struct vif_params - describes virtual interface parameters * @use_4addr: use 4-address frames + * @macaddr: address to use for this virtual interface. This will only + * be used for non-netdevice interfaces. If this parameter is set + * to zero address the driver may determine the address as needed. */ struct vif_params { int use_4addr; + u8 macaddr[ETH_ALEN]; }; /** diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 1a7a710fe9bf..d543cf152100 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2079,6 +2079,13 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info) !(rdev->wiphy.interface_modes & (1 << type))) return -EOPNOTSUPP; + if (type == NL80211_IFTYPE_P2P_DEVICE && info->attrs[NL80211_ATTR_MAC]) { + nla_memcpy(params.macaddr, info->attrs[NL80211_ATTR_MAC], + ETH_ALEN); + if (!is_valid_ether_addr(params.macaddr)) + return -EADDRNOTAVAIL; + } + if (info->attrs[NL80211_ATTR_4ADDR]) { params.use_4addr = !!nla_get_u8(info->attrs[NL80211_ATTR_4ADDR]); err = nl80211_valid_4addr(rdev, NULL, params.use_4addr, type); -- cgit v1.2.3 From 9cbbffe2ded494429b0d005a51a88242bd9b3095 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 9 Jan 2013 12:34:55 -0500 Subject: mac80211: set NEED_TXPROCESSING for PERR frames A user reported warnings in ath5k due to transmitting frames with no rates set up. The frames were Mesh PERR frames, and some debugging showed an empty control block with just the vif pointer: > [ 562.522682] XXX txinfo: 00000000: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 ................ > [ 562.522688] XXX txinfo: 00000010: 00 00 00 00 00 00 00 00 54 b8 f2 > db 00 00 00 00 ........T....... > [ 562.522693] XXX txinfo: 00000020: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 ................ Set the IEEE80211_TX_INTFL_NEED_TXPROCESSING flag to ensure that rate control gets run before the frame is sent. Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- net/mac80211/mesh_hwmp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 47aeee2d8db1..40b390581b01 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -215,6 +215,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, skb->priority = 7; info->control.vif = &sdata->vif; + info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; ieee80211_set_qos_hdr(sdata, skb); } -- cgit v1.2.3 From 8680451f38a64bd270233b3c0eeb7c45f2b5efe3 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Wed, 9 Jan 2013 12:34:56 -0500 Subject: mac80211: add encrypt headroom to PERR frames Mesh PERR action frames are robust and thus may be encrypted, so add proper head/tailroom to allow this. Fixes this warning when operating a Mesh STA on ath5k: WARNING: at net/mac80211/wpa.c:427 ccmp_encrypt_skb.isra.5+0x7b/0x1a0 [mac80211]() Call Trace: [] warn_slowpath_common+0x63/0x78 [] warn_slowpath_null+0xf/0x13 [] ccmp_encrypt_skb.isra.5+0x7b/0x1a0 [mac80211] [] ieee80211_crypto_ccmp_encrypt+0x1f/0x37 [mac80211] [] invoke_tx_handlers+0xcad/0x10bd [mac80211] [] ieee80211_tx+0x87/0xb3 [mac80211] [] ieee80211_tx_pending+0xcc/0x170 [mac80211] [] tasklet_action+0x3e/0x65 Signed-off-by: Bob Copeland Signed-off-by: Johannes Berg --- net/mac80211/mesh_hwmp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 40b390581b01..2659e428b80c 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -247,11 +247,13 @@ int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, return -EAGAIN; skb = dev_alloc_skb(local->tx_headroom + + IEEE80211_ENCRYPT_HEADROOM + + IEEE80211_ENCRYPT_TAILROOM + hdr_len + 2 + 15 /* PERR IE */); if (!skb) return -1; - skb_reserve(skb, local->tx_headroom); + skb_reserve(skb, local->tx_headroom + IEEE80211_ENCRYPT_HEADROOM); mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len); memset(mgmt, 0, hdr_len); mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | -- cgit v1.2.3 From cee00a959c0a86571e6f99cf42f0261d7e54d2ae Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Tue, 15 Jan 2013 17:15:57 +0200 Subject: cfg80211: Allow use_mfp to be specified with the connect command The NL80211_ATTR_USE_MFP attribute was originally added for NL80211_CMD_ASSOCIATE, but it is actually as useful (if not even more useful) with NL80211_CMD_CONNECT, so process that attribute with the connect command, too. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ include/uapi/linux/nl80211.h | 6 +++--- net/wireless/nl80211.c | 9 +++++++++ net/wireless/sme.c | 3 ++- 4 files changed, 16 insertions(+), 4 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d81e730962cc..f1686d460e6b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1465,6 +1465,7 @@ struct cfg80211_ibss_params { * @ie: IEs for association request * @ie_len: Length of assoc_ie in octets * @privacy: indicates whether privacy-enabled APs should be used + * @mfp: indicate whether management frame protection is used * @crypto: crypto settings * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication @@ -1485,6 +1486,7 @@ struct cfg80211_connect_params { u8 *ie; size_t ie_len; bool privacy; + enum nl80211_mfp mfp; struct cfg80211_crypto_settings crypto; const u8 *key; u8 key_len, key_idx; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 6c4f703ae890..d01c16220dc5 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -374,8 +374,8 @@ * requests to connect to a specified network but without separating * auth and assoc steps. For this, you need to specify the SSID in a * %NL80211_ATTR_SSID attribute, and can optionally specify the association - * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC, - * %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, + * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_USE_MFP, + * %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT, * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE and * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT. * Background scan period can optionally be @@ -958,7 +958,7 @@ enum nl80211_commands { * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is * used for the association (&enum nl80211_mfp, represented as a u32); * this attribute can be used - * with %NL80211_CMD_ASSOCIATE request + * with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests * * @NL80211_ATTR_STA_FLAGS2: Attribute containing a * &struct nl80211_sta_flag_update. diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d543cf152100..df82a5c9faee 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5932,6 +5932,15 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) connect.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]); } + if (info->attrs[NL80211_ATTR_USE_MFP]) { + connect.mfp = nla_get_u32(info->attrs[NL80211_ATTR_USE_MFP]); + if (connect.mfp != NL80211_MFP_REQUIRED && + connect.mfp != NL80211_MFP_NO) + return -EINVAL; + } else { + connect.mfp = NL80211_MFP_NO; + } + if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) { connect.channel = ieee80211_get_channel(wiphy, diff --git a/net/wireless/sme.c b/net/wireless/sme.c index d2d26518cdd7..a825dfe12cf7 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -192,7 +192,8 @@ static int cfg80211_conn_do_work(struct wireless_dev *wdev) prev_bssid, params->ssid, params->ssid_len, params->ie, params->ie_len, - false, ¶ms->crypto, + params->mfp != NL80211_MFP_NO, + ¶ms->crypto, params->flags, ¶ms->ht_capa, ¶ms->ht_capa_mask); if (err) -- cgit v1.2.3 From 11c4a075db2f8774d37544342c8cb9752b4db9e1 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Tue, 8 Jan 2013 14:04:07 +0100 Subject: cfg80211: check radar interface combinations To ease further DFS development regarding interface combinations, use the interface combinations structure to test for radar capabilities. Drivers can specify which channel widths they support, and in which modes. Right now only a single AP interface is allowed, but as the DFS code evolves other combinations can be enabled. Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 2 ++ include/uapi/linux/nl80211.h | 3 +++ net/wireless/core.c | 12 ++++++++++-- net/wireless/core.h | 7 ++++--- net/wireless/nl80211.c | 3 +++ net/wireless/util.c | 41 ++++++++++++++++++++++++++++++++++++++--- 6 files changed, 60 insertions(+), 8 deletions(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f1686d460e6b..970da4420676 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2125,6 +2125,7 @@ struct ieee80211_iface_limit { * @beacon_int_infra_match: In this combination, the beacon intervals * between infrastructure and AP types must match. This is required * only in special cases. + * @radar_detect_widths: bitmap of channel widths supported for radar detection * * These examples can be expressed as follows: * @@ -2177,6 +2178,7 @@ struct ieee80211_iface_combination { u16 max_interfaces; u8 n_limits; bool beacon_int_infra_match; + u8 radar_detect_widths; }; struct mac_address { diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d01c16220dc5..e6eeb4ba5dc5 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2984,6 +2984,8 @@ enum nl80211_iface_limit_attrs { * the infrastructure network's beacon interval. * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many * different channels may be used within this group. + * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap + * of supported channel widths for radar detection. * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * @@ -3016,6 +3018,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_MAXNUM, NL80211_IFACE_COMB_STA_AP_BI_MATCH, NL80211_IFACE_COMB_NUM_CHANNELS, + NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, /* keep last */ NUM_NL80211_IFACE_COMB, diff --git a/net/wireless/core.c b/net/wireless/core.c index 747dd9365a44..0e702cdc6043 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -382,8 +382,11 @@ static int wiphy_verify_combinations(struct wiphy *wiphy) c = &wiphy->iface_combinations[i]; - /* Combinations with just one interface aren't real */ - if (WARN_ON(c->max_interfaces < 2)) + /* + * Combinations with just one interface aren't real, + * however we make an exception for DFS. + */ + if (WARN_ON((c->max_interfaces < 2) && !c->radar_detect_widths)) return -EINVAL; /* Need at least one channel */ @@ -398,6 +401,11 @@ static int wiphy_verify_combinations(struct wiphy *wiphy) CFG80211_MAX_NUM_DIFFERENT_CHANNELS)) return -EINVAL; + /* DFS only works on one channel. */ + if (WARN_ON(c->radar_detect_widths && + (c->num_different_channels > 1))) + return -EINVAL; + if (WARN_ON(!c->n_limits)) return -EINVAL; diff --git a/net/wireless/core.h b/net/wireless/core.h index f342267e3620..8396f7671c8d 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -425,7 +425,8 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, enum nl80211_iftype iftype, struct ieee80211_channel *chan, - enum cfg80211_chan_mode chanmode); + enum cfg80211_chan_mode chanmode, + u8 radar_detect); static inline int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, @@ -433,7 +434,7 @@ cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, enum nl80211_iftype iftype) { return cfg80211_can_use_iftype_chan(rdev, wdev, iftype, NULL, - CHAN_MODE_UNDEFINED); + CHAN_MODE_UNDEFINED, 0); } static inline int @@ -450,7 +451,7 @@ cfg80211_can_use_chan(struct cfg80211_registered_device *rdev, enum cfg80211_chan_mode chanmode) { return cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, - chan, chanmode); + chan, chanmode, 0); } void diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index df82a5c9faee..33de80364c5c 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -856,6 +856,9 @@ static int nl80211_put_iface_combinations(struct wiphy *wiphy, nla_put_u32(msg, NL80211_IFACE_COMB_MAXNUM, c->max_interfaces)) goto nla_put_failure; + if (nla_put_u32(msg, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, + c->radar_detect_widths)) + goto nla_put_failure; nla_nest_end(msg, nl_combi); } diff --git a/net/wireless/util.c b/net/wireless/util.c index 16d76a807c2f..1c2795d52db0 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1184,7 +1184,8 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, enum nl80211_iftype iftype, struct ieee80211_channel *chan, - enum cfg80211_chan_mode chanmode) + enum cfg80211_chan_mode chanmode, + u8 radar_detect) { struct wireless_dev *wdev_iter; u32 used_iftypes = BIT(iftype); @@ -1195,14 +1196,45 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, enum cfg80211_chan_mode chmode; int num_different_channels = 0; int total = 1; + bool radar_required; int i, j; ASSERT_RTNL(); lockdep_assert_held(&rdev->devlist_mtx); + if (WARN_ON(hweight32(radar_detect) > 1)) + return -EINVAL; + + switch (iftype) { + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_AP_VLAN: + case NL80211_IFTYPE_MESH_POINT: + case NL80211_IFTYPE_P2P_GO: + case NL80211_IFTYPE_WDS: + radar_required = !!(chan->flags & IEEE80211_CHAN_RADAR); + break; + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_MONITOR: + radar_required = false; + break; + case NL80211_IFTYPE_P2P_DEVICE: + case NUM_NL80211_IFTYPES: + case NL80211_IFTYPE_UNSPECIFIED: + default: + return -EINVAL; + } + + if (radar_required && !radar_detect) + return -EINVAL; + /* Always allow software iftypes */ - if (rdev->wiphy.software_iftypes & BIT(iftype)) + if (rdev->wiphy.software_iftypes & BIT(iftype)) { + if (radar_detect) + return -EINVAL; return 0; + } memset(num, 0, sizeof(num)); memset(used_channels, 0, sizeof(used_channels)); @@ -1275,7 +1307,7 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, used_iftypes |= BIT(wdev_iter->iftype); } - if (total == 1) + if (total == 1 && !radar_detect) return 0; for (i = 0; i < rdev->wiphy.n_iface_combinations; i++) { @@ -1308,6 +1340,9 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, } } + if (radar_detect && !(c->radar_detect_widths & radar_detect)) + goto cont; + /* * Finally check that all iftypes that we're currently * using are actually part of this combination. If they -- cgit v1.2.3 From 5a32aff37a02ebc959837f08d09ac8ba65d4f1b0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 21 Dec 2012 12:36:33 +0100 Subject: mac80211: split out chandef tracing macros Some new APIs will require tracing a chandef without it being part of a channel context, so separate out the tracing macros for that. Signed-off-by: Johannes Berg --- net/mac80211/trace.h | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index a8270b441a6f..41861b91daa3 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -28,21 +28,27 @@ #define VIF_PR_FMT " vif:%s(%d%s)" #define VIF_PR_ARG __get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : "" -#define CHANCTX_ENTRY __field(u32, control_freq) \ +#define CHANDEF_ENTRY __field(u32, control_freq) \ __field(u32, chan_width) \ __field(u32, center_freq1) \ - __field(u32, center_freq2) \ + __field(u32, center_freq2) +#define CHANDEF_ASSIGN(c) \ + __entry->control_freq = (c)->chan->center_freq; \ + __entry->chan_width = (c)->width; \ + __entry->center_freq1 = (c)->center_freq1; \ + __entry->center_freq1 = (c)->center_freq2; +#define CHANDEF_PR_FMT " control:%d MHz width:%d center: %d/%d MHz" +#define CHANDEF_PR_ARG __entry->control_freq, __entry->chan_width, \ + __entry->center_freq1, __entry->center_freq2 + +#define CHANCTX_ENTRY CHANDEF_ENTRY \ __field(u8, rx_chains_static) \ __field(u8, rx_chains_dynamic) -#define CHANCTX_ASSIGN __entry->control_freq = ctx->conf.def.chan->center_freq;\ - __entry->chan_width = ctx->conf.def.width; \ - __entry->center_freq1 = ctx->conf.def.center_freq1; \ - __entry->center_freq2 = ctx->conf.def.center_freq2; \ +#define CHANCTX_ASSIGN CHANDEF_ASSIGN(&ctx->conf.def) \ __entry->rx_chains_static = ctx->conf.rx_chains_static; \ __entry->rx_chains_dynamic = ctx->conf.rx_chains_dynamic -#define CHANCTX_PR_FMT " control:%d MHz width:%d center: %d/%d MHz chains:%d/%d" -#define CHANCTX_PR_ARG __entry->control_freq, __entry->chan_width, \ - __entry->center_freq1, __entry->center_freq2, \ +#define CHANCTX_PR_FMT CHANDEF_PR_FMT " chains:%d/%d" +#define CHANCTX_PR_ARG CHANDEF_PR_ARG, \ __entry->rx_chains_static, __entry->rx_chains_dynamic -- cgit v1.2.3 From fa4cffcba9e13798ed7c6b8526b91b1631ecb53e Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 16 Jan 2013 11:45:15 +0100 Subject: iwlegacy: fix IBSS cleanup We do not correctly change interface type when switching from IBSS mode to STA mode, that results in microcode errors. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=886946 Reported-by: Jaroslav Skarvada Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/common.c | 35 ++++++++++++++-------------------- 1 file changed, 14 insertions(+), 21 deletions(-) diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 7e16d10a7f14..90b8970eadf0 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -3958,17 +3958,21 @@ il_connection_init_rx_config(struct il_priv *il) memset(&il->staging, 0, sizeof(il->staging)); - if (!il->vif) { + switch (il->iw_mode) { + case NL80211_IFTYPE_UNSPECIFIED: il->staging.dev_type = RXON_DEV_TYPE_ESS; - } else if (il->vif->type == NL80211_IFTYPE_STATION) { + break; + case NL80211_IFTYPE_STATION: il->staging.dev_type = RXON_DEV_TYPE_ESS; il->staging.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; - } else if (il->vif->type == NL80211_IFTYPE_ADHOC) { + break; + case NL80211_IFTYPE_ADHOC: il->staging.dev_type = RXON_DEV_TYPE_IBSS; il->staging.flags = RXON_FLG_SHORT_PREAMBLE_MSK; il->staging.filter_flags = RXON_FILTER_BCON_AWARE_MSK | RXON_FILTER_ACCEPT_GRP_MSK; - } else { + break; + default: IL_ERR("Unsupported interface type %d\n", il->vif->type); return; } @@ -4550,8 +4554,7 @@ out: EXPORT_SYMBOL(il_mac_add_interface); static void -il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif, - bool mode_change) +il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif) { lockdep_assert_held(&il->mutex); @@ -4560,9 +4563,7 @@ il_teardown_interface(struct il_priv *il, struct ieee80211_vif *vif, il_force_scan_end(il); } - if (!mode_change) - il_set_mode(il); - + il_set_mode(il); } void @@ -4575,8 +4576,8 @@ il_mac_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) WARN_ON(il->vif != vif); il->vif = NULL; - - il_teardown_interface(il, vif, false); + il->iw_mode = NL80211_IFTYPE_UNSPECIFIED; + il_teardown_interface(il, vif); memset(il->bssid, 0, ETH_ALEN); D_MAC80211("leave\n"); @@ -4685,18 +4686,10 @@ il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif, } /* success */ - il_teardown_interface(il, vif, true); vif->type = newtype; vif->p2p = false; - err = il_set_mode(il); - WARN_ON(err); - /* - * We've switched internally, but submitting to the - * device may have failed for some reason. Mask this - * error, because otherwise mac80211 will not switch - * (and set the interface type back) and we'll be - * out of sync with it. - */ + il->iw_mode = newtype; + il_teardown_interface(il, vif); err = 0; out: -- cgit v1.2.3 From 430d25251ef3c36404e6b4a7eaaae35e225bc8e7 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 19 Jan 2013 12:36:49 -0600 Subject: rtlwifi: Fix build warning introduced by commit a290593 The kbuild test robot reports the following warning with x86_64-randconfig-x955: warning: (RTL8192CE && RTL8192SE && RTL8192DE && RTL8723AE && RTL8192CU) selects RTLWIFI which has unmet direct dependencies (NETDEVICES && WLAN && (RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE)) This warning was introduced in commit a290593, "rtlwifi: Modify files for addition of rtl8723ae", and is d ue to a missing dependence of RTLWIFI on RTL8723AE. Signed-off-by: Larry Finger Cc: kbuild test robot Reported-by: kbuild test robot Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig index 21b1bbb93a7e..b80bc4612581 100644 --- a/drivers/net/wireless/rtlwifi/Kconfig +++ b/drivers/net/wireless/rtlwifi/Kconfig @@ -57,12 +57,12 @@ config RTL8192CU config RTLWIFI tristate - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE + depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE default m config RTLWIFI_DEBUG bool "Additional debugging output" - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE + depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE default y config RTL8192C_COMMON -- cgit v1.2.3 From 4a8f199508d79ff8a7d1e22f47b912baaf225336 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 21:55:20 +0100 Subject: ath9k_hw: fix calibration issues on chainmask that don't include chain 0 Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 2 ++ drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +- drivers/net/wireless/ath/ath9k/hw.h | 1 + 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 8b0d8dcd7625..56317b0fb6b6 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -976,6 +976,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, AR_PHY_CL_TAB_1, AR_PHY_CL_TAB_2 }; + ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask); + if (rtt) { if (!ar9003_hw_rtt_restore(ah, chan)) run_rtt_cal = true; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index ce19c09fa8e8..8290eddaf0e3 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -586,7 +586,7 @@ static void ar9003_hw_init_bb(struct ath_hw *ah, ath9k_hw_synth_delay(ah, chan, synthDelay); } -static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) +void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) { switch (rx) { case 0x5: diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 7f1a8e91c908..9d26fc56ca56 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -1066,6 +1066,7 @@ void ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain); int ar9003_paprd_init_table(struct ath_hw *ah); bool ar9003_paprd_is_done(struct ath_hw *ah); bool ar9003_is_paprd_enabled(struct ath_hw *ah); +void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx); /* Hardware family op attach helpers */ void ar5008_hw_attach_phy_ops(struct ath_hw *ah); -- cgit v1.2.3 From 24171dd92096fc370b195f3f6bdc0798855dc3f9 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 21:55:21 +0100 Subject: ath9k_hw: fix chain swap setting when setting rx chainmask to 5 Chain swapping should only be enabled when the EEPROM chainmask is set to 5, regardless of what the runtime chainmask is. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 25 ++++++------------------- 1 file changed, 6 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 8290eddaf0e3..3afc24bde6d6 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -588,30 +588,17 @@ static void ar9003_hw_init_bb(struct ath_hw *ah, void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx) { - switch (rx) { - case 0x5: + if (ah->caps.tx_chainmask == 5 || ah->caps.rx_chainmask == 5) REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP, AR_PHY_SWAP_ALT_CHAIN); - case 0x3: - case 0x1: - case 0x2: - case 0x7: - REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx); - REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx); - break; - default: - break; - } + + REG_WRITE(ah, AR_PHY_RX_CHAINMASK, rx); + REG_WRITE(ah, AR_PHY_CAL_CHAINMASK, rx); if ((ah->caps.hw_caps & ATH9K_HW_CAP_APM) && (tx == 0x7)) - REG_WRITE(ah, AR_SELFGEN_MASK, 0x3); - else - REG_WRITE(ah, AR_SELFGEN_MASK, tx); + tx = 3; - if (tx == 0x5) { - REG_SET_BIT(ah, AR_PHY_ANALOG_SWAP, - AR_PHY_SWAP_ALT_CHAIN); - } + REG_WRITE(ah, AR_SELFGEN_MASK, tx); } /* -- cgit v1.2.3 From fea92cbf0850d788683827990670d3968f893327 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 21:55:22 +0100 Subject: ath9k: allow setting arbitrary antenna masks on AR9003+ Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 3796e65c26f1..dd91f8fdc01c 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -1826,6 +1826,9 @@ static u32 fill_chainmask(u32 cap, u32 new) static bool validate_antenna_mask(struct ath_hw *ah, u32 val) { + if (AR_SREV_9300_20_OR_LATER(ah)) + return true; + switch (val & 0x7) { case 0x1: case 0x3: -- cgit v1.2.3 From 83f0c6d1f502bd75bb4a9e31e8d64e59c6894ad1 Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Mon, 21 Jan 2013 21:04:10 -0800 Subject: mwifiex: fix typo in PCIe adapter NULL check Add missing "!" as we are supposed to check "!card->adapter" in PCIe suspend handler. Cc: "3.2+" Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Reviewed-by: Sergey V. Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/pcie.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 13fbc4eb1595..b879e1338a54 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -161,7 +161,7 @@ static int mwifiex_pcie_suspend(struct pci_dev *pdev, pm_message_t state) if (pdev) { card = (struct pcie_service_card *) pci_get_drvdata(pdev); - if (!card || card->adapter) { + if (!card || !card->adapter) { pr_err("Card or adapter structure is not valid\n"); return 0; } -- cgit v1.2.3 From 6aaacd861517f89797f2f4a54624a599847262f3 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 13 Jan 2013 19:54:58 +0100 Subject: ath9k_hw: fix RF bank initialization ar900*_init_mode_regs needs to be called before RF banks are allocated, otherwise the storage size of RF banks isn't known. This patch fixes a memory overrun that can show up as a crash on unloading the module. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_hw.c | 12 ++++++++---- drivers/net/wireless/ath/ath9k/ar9003_hw.c | 2 +- drivers/net/wireless/ath/ath9k/hw.c | 7 ------- drivers/net/wireless/ath/ath9k/hw.h | 2 -- 4 files changed, 9 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index 54da026f058c..f053d978540e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -23,13 +23,13 @@ /* General hardware code for the A5008/AR9001/AR9002 hadware families */ -static void ar9002_hw_init_mode_regs(struct ath_hw *ah) +static int ar9002_hw_init_mode_regs(struct ath_hw *ah) { if (AR_SREV_9271(ah)) { INIT_INI_ARRAY(&ah->iniModes, ar9271Modes_9271); INIT_INI_ARRAY(&ah->iniCommon, ar9271Common_9271); INIT_INI_ARRAY(&ah->iniModes_9271_ANI_reg, ar9271Modes_9271_ANI_reg); - return; + return 0; } if (ah->config.pcie_clock_req) @@ -104,7 +104,7 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah) data = devm_kzalloc(ah->dev, size, GFP_KERNEL); if (!data) - return; + return -ENOMEM; memcpy(data, addac->ia_array, size); addac->ia_array = data; @@ -120,6 +120,7 @@ static void ar9002_hw_init_mode_regs(struct ath_hw *ah) INIT_INI_ARRAY(&ah->iniCckfirJapan2484, ar9287Common_japan_2484_cck_fir_coeff_9287_1_1); } + return 0; } static void ar9280_20_hw_init_rxgain_ini(struct ath_hw *ah) @@ -415,7 +416,10 @@ int ar9002_hw_attach_ops(struct ath_hw *ah) struct ath_hw_ops *ops = ath9k_hw_ops(ah); int ret; - priv_ops->init_mode_regs = ar9002_hw_init_mode_regs; + ret = ar9002_hw_init_mode_regs(ah); + if (ret) + return ret; + priv_ops->init_mode_gain_regs = ar9002_hw_init_mode_gain_regs; ops->config_pci_powersave = ar9002_hw_configpcipowersave; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index de8a56c92e1a..6fcd6e989c55 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -704,7 +704,7 @@ void ar9003_hw_attach_ops(struct ath_hw *ah) struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); struct ath_hw_ops *ops = ath9k_hw_ops(ah); - priv_ops->init_mode_regs = ar9003_hw_init_mode_regs; + ar9003_hw_init_mode_regs(ah); priv_ops->init_mode_gain_regs = ar9003_hw_init_mode_gain_regs; ops->config_pci_powersave = ar9003_hw_configpcipowersave; diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index caf0626eeaa5..a7448d1f5460 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -54,11 +54,6 @@ static void ath9k_hw_init_cal_settings(struct ath_hw *ah) ath9k_hw_private_ops(ah)->init_cal_settings(ah); } -static void ath9k_hw_init_mode_regs(struct ath_hw *ah) -{ - ath9k_hw_private_ops(ah)->init_mode_regs(ah); -} - static u32 ath9k_hw_compute_pll_control(struct ath_hw *ah, struct ath9k_channel *chan) { @@ -670,8 +665,6 @@ static int __ath9k_hw_init(struct ath_hw *ah) if (!AR_SREV_9300_20_OR_LATER(ah)) ah->ani_function &= ~ATH9K_ANI_MRC_CCK; - ath9k_hw_init_mode_regs(ah); - if (!ah->is_pciexpress) ath9k_hw_disablepcie(ah); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index d32ebf7a2414..195613ff72ee 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -600,7 +600,6 @@ struct ath_hw_radar_conf { * @init_cal_settings: setup types of calibrations supported * @init_cal: starts actual calibration * - * @init_mode_regs: Initializes mode registers * @init_mode_gain_regs: Initialize TX/RX gain registers * * @rf_set_freq: change frequency @@ -619,7 +618,6 @@ struct ath_hw_private_ops { void (*init_cal_settings)(struct ath_hw *ah); bool (*init_cal)(struct ath_hw *ah, struct ath9k_channel *chan); - void (*init_mode_regs)(struct ath_hw *ah); void (*init_mode_gain_regs)(struct ath_hw *ah); void (*setup_calibration)(struct ath_hw *ah, struct ath9k_cal_list *currCal); -- cgit v1.2.3 From 708d019fd1d2d1bf184e797ebe934c90a6527d50 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Tue, 8 Jan 2013 13:33:03 +0800 Subject: drivers/net/wireless: need consider the not '\0' terminated string. in ray_cs.c: the a_current_ess_id is "Null terminated unless ESSID_SIZE long" so we need buffer it with '\0' firstly, before using strlen or %s. additional information: in drivers/net/wireless/rayctl.h: "NULL terminated unless 32 long" is a comment at line 616, 664 ESSID_SIZE is 32, at line 190 in include/uapi/linux/wireless.h: IW_ESSID_MAX_SIZE is also 32 in drivers/net/wireless/ray_cs.c: use strncpy for it, without '\0' terminated, at line 639 use memcpy for it, assume not '\0' terminated in line 1092..1097 buffer it with '\0' firstly, before using %s, in line 2576, 2598..2600 Signed-off-by: Chen Gang Signed-off-by: John W. Linville --- drivers/net/wireless/ray_cs.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 598ca1cafb95..e7cf37f550d1 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -1107,12 +1107,15 @@ static int ray_get_essid(struct net_device *dev, struct iw_request_info *info, union iwreq_data *wrqu, char *extra) { ray_dev_t *local = netdev_priv(dev); + UCHAR tmp[IW_ESSID_MAX_SIZE + 1]; /* Get the essid that was set */ memcpy(extra, local->sparm.b5.a_current_ess_id, IW_ESSID_MAX_SIZE); + memcpy(tmp, local->sparm.b5.a_current_ess_id, IW_ESSID_MAX_SIZE); + tmp[IW_ESSID_MAX_SIZE] = '\0'; /* Push it out ! */ - wrqu->essid.length = strlen(extra); + wrqu->essid.length = strlen(tmp); wrqu->essid.flags = 1; /* active */ return 0; @@ -1842,6 +1845,8 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id) UCHAR tmp; UCHAR cmd; UCHAR status; + UCHAR memtmp[ESSID_SIZE + 1]; + if (dev == NULL) /* Note that we want interrupts with dev->start == 0 */ return IRQ_NONE; @@ -1901,17 +1906,21 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id) break; case CCS_START_NETWORK: case CCS_JOIN_NETWORK: + memcpy(memtmp, local->sparm.b4.a_current_ess_id, + ESSID_SIZE); + memtmp[ESSID_SIZE] = '\0'; + if (status == CCS_COMMAND_COMPLETE) { if (readb (&pccs->var.start_network.net_initiated) == 1) { dev_dbg(&link->dev, "ray_cs interrupt network \"%s\" started\n", - local->sparm.b4.a_current_ess_id); + memtmp); } else { dev_dbg(&link->dev, "ray_cs interrupt network \"%s\" joined\n", - local->sparm.b4.a_current_ess_id); + memtmp); } memcpy_fromio(&local->bss_id, pccs->var.start_network.bssid, @@ -1939,12 +1948,12 @@ static irqreturn_t ray_interrupt(int irq, void *dev_id) if (status == CCS_START_NETWORK) { dev_dbg(&link->dev, "ray_cs interrupt network \"%s\" start failed\n", - local->sparm.b4.a_current_ess_id); + memtmp); local->timer.function = start_net; } else { dev_dbg(&link->dev, "ray_cs interrupt network \"%s\" join failed\n", - local->sparm.b4.a_current_ess_id); + memtmp); local->timer.function = join_net; } add_timer(&local->timer); -- cgit v1.2.3 From e03e8ddbfd1f04fc1437e5e3e7a8ec05a1355c5f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 20 Jan 2013 19:31:30 +0300 Subject: b43: N-PHY: fix gain in b43_nphy_get_gain_ctl_workaround_ent() There were no break statements in this switch statement so everything used the default settings. Per Walter Harms's suggestion, I've replaced the switch statement and done a little cleanup. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville --- drivers/net/wireless/b43/tables_nphy.c | 30 ++++++++---------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/drivers/net/wireless/b43/tables_nphy.c b/drivers/net/wireless/b43/tables_nphy.c index 97d4e27bf36f..aaca60c6f575 100644 --- a/drivers/net/wireless/b43/tables_nphy.c +++ b/drivers/net/wireless/b43/tables_nphy.c @@ -3226,8 +3226,6 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent( { struct nphy_gain_ctl_workaround_entry *e; u8 phy_idx; - u8 tr_iso = ghz5 ? dev->dev->bus_sprom->fem.ghz5.tr_iso : - dev->dev->bus_sprom->fem.ghz2.tr_iso; if (!ghz5 && dev->phy.rev >= 6 && dev->phy.radio_rev == 11) return &nphy_gain_ctl_wa_phy6_radio11_ghz2; @@ -3249,6 +3247,10 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent( !b43_channel_type_is_40mhz(dev->phy.channel_type)) e->cliplo_gain = 0x2d; } else if (!ghz5 && dev->phy.rev >= 5) { + static const int gain_data[] = {0x0062, 0x0064, 0x006a, 0x106a, + 0x106c, 0x1074, 0x107c, 0x207c}; + u8 tr_iso = dev->dev->bus_sprom->fem.ghz2.tr_iso; + if (ext_lna) { e->rfseq_init[0] &= ~0x4000; e->rfseq_init[1] &= ~0x4000; @@ -3256,26 +3258,10 @@ struct nphy_gain_ctl_workaround_entry *b43_nphy_get_gain_ctl_workaround_ent( e->rfseq_init[3] &= ~0x4000; e->init_gain &= ~0x4000; } - switch (tr_iso) { - case 0: - e->cliplo_gain = 0x0062; - case 1: - e->cliplo_gain = 0x0064; - case 2: - e->cliplo_gain = 0x006a; - case 3: - e->cliplo_gain = 0x106a; - case 4: - e->cliplo_gain = 0x106c; - case 5: - e->cliplo_gain = 0x1074; - case 6: - e->cliplo_gain = 0x107c; - case 7: - e->cliplo_gain = 0x207c; - default: - e->cliplo_gain = 0x106a; - } + if (tr_iso > 7) + tr_iso = 3; + e->cliplo_gain = gain_data[tr_iso]; + } else if (ghz5 && dev->phy.rev == 4 && ext_lna) { e->rfseq_init[0] &= ~0x4000; e->rfseq_init[1] &= ~0x4000; -- cgit v1.2.3 From f49aabf816afa5913e5001bd1db1c3efb4c6e19e Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 13 Jan 2013 23:03:42 +0300 Subject: prism54: bug in getting auth type There is a missing break statement so SHARED_KEY authentication doesn't work. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville --- drivers/net/wireless/prism54/isl_ioctl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 4e44b1af119a..1c22b81e6ef3 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -1503,6 +1503,7 @@ static int prism54_get_auth(struct net_device *ndev, case DOT11_AUTH_BOTH: case DOT11_AUTH_SK: param->value = IW_AUTH_ALG_SHARED_KEY; + break; case DOT11_AUTH_NONE: default: param->value = 0; -- cgit v1.2.3 From 84e9e8ebd369679a958200a8baca96aafb2393bb Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Thu, 17 Jan 2013 17:34:32 +0100 Subject: rt2x00: Improve TX status handling for BlockAckReq frames Since rt2800 hardware isn't capable of reporting the TX status of BlockAckReq frames implement the TX status handling of BARs in rt2x00lib. We keep track of all BARs that are send out and try to match incoming BAs to the appropriate BARs. This allows us to report a more or less accurate TX status for BAR frames which in turn improves BA session stability. This is loosley based on Christian Lamparter's patch for carl9170 "carl9170: fix HT peer BA session corruption". We have to walk the list of pending BARs for every rx'red BA even though most BAs don't belong to any of these BARs as they are just acknowledging an AMPDU. To keep that overhead low use RCU which allows us to walk the list of pending BARs without the need to acquire a lock. This however requires us to _copy_ relevant information from the BAR (RA, TA, control field, start sequence number) into our BAR list entry. Signed-off-by: Helmut Schaa Tested-by: Andreas Hartmann Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 6 +- drivers/net/wireless/rt2x00/rt2x00.h | 20 ++++++ drivers/net/wireless/rt2x00/rt2x00dev.c | 101 +++++++++++++++++++++++++++++- drivers/net/wireless/rt2x00/rt2x00queue.c | 47 ++++++++++++++ 4 files changed, 169 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index f139a913c25a..a5c694f23d33 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1296,8 +1296,7 @@ void rt2800_config_filter(struct rt2x00_dev *rt2x00dev, !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_PSPOLL, !(filter_flags & FIF_PSPOLL)); - rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, - !(filter_flags & FIF_CONTROL)); + rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BA, 0); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_BAR, !(filter_flags & FIF_CONTROL)); rt2x00_set_field32(®, RX_FILTER_CFG_DROP_CNTL, @@ -5146,8 +5145,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_AMPDU_AGGREGATION | - IEEE80211_HW_REPORTS_TX_ACK_STATUS | - IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL; + IEEE80211_HW_REPORTS_TX_ACK_STATUS; /* * Don't set IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING for USB devices diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 0751b35ef6dc..b52512b8ac5f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1016,6 +1016,26 @@ struct rt2x00_dev { * Protect the interrupt mask register. */ spinlock_t irqmask_lock; + + /* + * List of BlockAckReq TX entries that need driver BlockAck processing. + */ + struct list_head bar_list; + spinlock_t bar_list_lock; +}; + +struct rt2x00_bar_list_entry { + struct list_head list; + struct rcu_head head; + + struct queue_entry *entry; + int block_acked; + + /* Relevant parts of the IEEE80211 BAR header */ + __u8 ra[6]; + __u8 ta[6]; + __le16 control; + __le16 start_seq_num; }; /* diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 44f8b3f3cbed..b40a53857498 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -271,6 +271,50 @@ void rt2x00lib_dmadone(struct queue_entry *entry) } EXPORT_SYMBOL_GPL(rt2x00lib_dmadone); +static inline int rt2x00lib_txdone_bar_status(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct ieee80211_bar *bar = (void *) entry->skb->data; + struct rt2x00_bar_list_entry *bar_entry; + int ret; + + if (likely(!ieee80211_is_back_req(bar->frame_control))) + return 0; + + /* + * Unlike all other frames, the status report for BARs does + * not directly come from the hardware as it is incapable of + * matching a BA to a previously send BAR. The hardware will + * report all BARs as if they weren't acked at all. + * + * Instead the RX-path will scan for incoming BAs and set the + * block_acked flag if it sees one that was likely caused by + * a BAR from us. + * + * Remove remaining BARs here and return their status for + * TX done processing. + */ + ret = 0; + rcu_read_lock(); + list_for_each_entry_rcu(bar_entry, &rt2x00dev->bar_list, list) { + if (bar_entry->entry != entry) + continue; + + spin_lock_bh(&rt2x00dev->bar_list_lock); + /* Return whether this BAR was blockacked or not */ + ret = bar_entry->block_acked; + /* Remove the BAR from our checklist */ + list_del_rcu(&bar_entry->list); + spin_unlock_bh(&rt2x00dev->bar_list_lock); + kfree_rcu(bar_entry, head); + + break; + } + rcu_read_unlock(); + + return ret; +} + void rt2x00lib_txdone(struct queue_entry *entry, struct txdone_entry_desc *txdesc) { @@ -324,9 +368,12 @@ void rt2x00lib_txdone(struct queue_entry *entry, rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb); /* - * Determine if the frame has been successfully transmitted. + * Determine if the frame has been successfully transmitted and + * remove BARs from our check list while checking for their + * TX status. */ success = + rt2x00lib_txdone_bar_status(entry) || test_bit(TXDONE_SUCCESS, &txdesc->flags) || test_bit(TXDONE_UNKNOWN, &txdesc->flags); @@ -491,6 +538,50 @@ static void rt2x00lib_sleep(struct work_struct *work) IEEE80211_CONF_CHANGE_PS); } +static void rt2x00lib_rxdone_check_ba(struct rt2x00_dev *rt2x00dev, + struct sk_buff *skb, + struct rxdone_entry_desc *rxdesc) +{ + struct rt2x00_bar_list_entry *entry; + struct ieee80211_bar *ba = (void *)skb->data; + + if (likely(!ieee80211_is_back(ba->frame_control))) + return; + + if (rxdesc->size < sizeof(*ba) + FCS_LEN) + return; + + rcu_read_lock(); + list_for_each_entry_rcu(entry, &rt2x00dev->bar_list, list) { + + if (ba->start_seq_num != entry->start_seq_num) + continue; + +#define TID_CHECK(a, b) ( \ + ((a) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK)) == \ + ((b) & cpu_to_le16(IEEE80211_BAR_CTRL_TID_INFO_MASK))) \ + + if (!TID_CHECK(ba->control, entry->control)) + continue; + +#undef TID_CHECK + + if (compare_ether_addr(ba->ra, entry->ta)) + continue; + + if (compare_ether_addr(ba->ta, entry->ra)) + continue; + + /* Mark BAR since we received the according BA */ + spin_lock_bh(&rt2x00dev->bar_list_lock); + entry->block_acked = 1; + spin_unlock_bh(&rt2x00dev->bar_list_lock); + break; + } + rcu_read_unlock(); + +} + static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, struct rxdone_entry_desc *rxdesc) @@ -673,6 +764,12 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp) */ rt2x00lib_rxdone_check_ps(rt2x00dev, entry->skb, &rxdesc); + /* + * Check for incoming BlockAcks to match to the BlockAckReqs + * we've send out. + */ + rt2x00lib_rxdone_check_ba(rt2x00dev, entry->skb, &rxdesc); + /* * Update extra components */ @@ -1183,6 +1280,8 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) spin_lock_init(&rt2x00dev->irqmask_lock); mutex_init(&rt2x00dev->csr_mutex); + INIT_LIST_HEAD(&rt2x00dev->bar_list); + spin_lock_init(&rt2x00dev->bar_list_lock); set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index e488b944a034..f35d85a71bbc 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -582,6 +582,48 @@ static void rt2x00queue_kick_tx_queue(struct data_queue *queue, queue->rt2x00dev->ops->lib->kick_queue(queue); } +static void rt2x00queue_bar_check(struct queue_entry *entry) +{ + struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; + struct ieee80211_bar *bar = (void *) (entry->skb->data + + rt2x00dev->ops->extra_tx_headroom); + struct rt2x00_bar_list_entry *bar_entry; + + if (likely(!ieee80211_is_back_req(bar->frame_control))) + return; + + bar_entry = kmalloc(sizeof(*bar_entry), GFP_ATOMIC); + + /* + * If the alloc fails we still send the BAR out but just don't track + * it in our bar list. And as a result we will report it to mac80211 + * back as failed. + */ + if (!bar_entry) + return; + + bar_entry->entry = entry; + bar_entry->block_acked = 0; + + /* + * Copy the relevant parts of the 802.11 BAR into out check list + * such that we can use RCU for less-overhead in the RX path since + * sending BARs and processing the according BlockAck should be + * the exception. + */ + memcpy(bar_entry->ra, bar->ra, sizeof(bar->ra)); + memcpy(bar_entry->ta, bar->ta, sizeof(bar->ta)); + bar_entry->control = bar->control; + bar_entry->start_seq_num = bar->start_seq_num; + + /* + * Insert BAR into our BAR check list. + */ + spin_lock_bh(&rt2x00dev->bar_list_lock); + list_add_tail_rcu(&bar_entry->list, &rt2x00dev->bar_list); + spin_unlock_bh(&rt2x00dev->bar_list_lock); +} + int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, bool local) { @@ -680,6 +722,11 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, goto out; } + /* + * Put BlockAckReqs into our check list for driver BA processing. + */ + rt2x00queue_bar_check(entry); + set_bit(ENTRY_DATA_PENDING, &entry->flags); rt2x00queue_index_inc(entry, Q_INDEX); -- cgit v1.2.3 From 7532c7d0138a4984eb0c8b12b9c310cf8a6d6977 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Thu, 17 Jan 2013 17:41:57 -0800 Subject: mwifiex: correction in status codes used for association failure When AP responds with appropriate status code, we forward that code correctly to cfg80211. But sometimes when there is no response from AP, our firmware uses proprietary status codes. We will map authentication timeout to WLAN_STATUS_AUTH_TIMEOUT and other proprietary codes to WLAN_STATUS_UNSPECIFIED_FAILURE. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/fw.h | 3 +++ drivers/net/wireless/mwifiex/join.c | 20 +++++++++++++++----- 2 files changed, 18 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/mwifiex/fw.h b/drivers/net/wireless/mwifiex/fw.h index 41c85dd78084..ebe2f6a7984c 100644 --- a/drivers/net/wireless/mwifiex/fw.h +++ b/drivers/net/wireless/mwifiex/fw.h @@ -330,6 +330,9 @@ enum P2P_MODES { #define HOST_SLEEP_CFG_GPIO_DEF 0xff #define HOST_SLEEP_CFG_GAP_DEF 0 +#define MWIFIEX_TIMEOUT_FOR_AP_RESP 0xfffc +#define MWIFIEX_STATUS_CODE_AUTH_TIMEOUT 2 + #define CMD_F_HOSTCMD (1 << 0) #define CMD_F_CANCELED (1 << 1) diff --git a/drivers/net/wireless/mwifiex/join.c b/drivers/net/wireless/mwifiex/join.c index 3c7cabeddf76..893d809ba83c 100644 --- a/drivers/net/wireless/mwifiex/join.c +++ b/drivers/net/wireless/mwifiex/join.c @@ -615,23 +615,33 @@ int mwifiex_ret_802_11_associate(struct mwifiex_private *priv, struct ieee_types_assoc_rsp *assoc_rsp; struct mwifiex_bssdescriptor *bss_desc; u8 enable_data = true; + u16 cap_info, status_code; assoc_rsp = (struct ieee_types_assoc_rsp *) &resp->params; + cap_info = le16_to_cpu(assoc_rsp->cap_info_bitmap); + status_code = le16_to_cpu(assoc_rsp->status_code); + priv->assoc_rsp_size = min(le16_to_cpu(resp->size) - S_DS_GEN, sizeof(priv->assoc_rsp_buf)); memcpy(priv->assoc_rsp_buf, &resp->params, priv->assoc_rsp_size); - if (le16_to_cpu(assoc_rsp->status_code)) { + if (status_code) { priv->adapter->dbg.num_cmd_assoc_failure++; dev_err(priv->adapter->dev, "ASSOC_RESP: failed, status code=%d err=%#x a_id=%#x\n", - le16_to_cpu(assoc_rsp->status_code), - le16_to_cpu(assoc_rsp->cap_info_bitmap), - le16_to_cpu(assoc_rsp->a_id)); + status_code, cap_info, le16_to_cpu(assoc_rsp->a_id)); + + if (cap_info == MWIFIEX_TIMEOUT_FOR_AP_RESP) { + if (status_code == MWIFIEX_STATUS_CODE_AUTH_TIMEOUT) + ret = WLAN_STATUS_AUTH_TIMEOUT; + else + ret = WLAN_STATUS_UNSPECIFIED_FAILURE; + } else { + ret = status_code; + } - ret = le16_to_cpu(assoc_rsp->status_code); goto done; } -- cgit v1.2.3 From a2ca8ecb8ffc985e82c9570c3837408f7efe8c9d Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 19 Jan 2013 01:24:01 +0400 Subject: mwl8k: don't return zero on failure paths in mwl8k_probe[_hw]() If pci_iomap() fails in mwl8k_probe(), it breaks off initialization, deallocates all resources, but returns zero. There is a similar issue when priv->rxd_ops is NULL in mwl8k_probe_hw(). The patch adds proper error code return values. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index a9c078899252..68357641c414 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -5555,6 +5555,7 @@ static int mwl8k_probe_hw(struct ieee80211_hw *hw) if (priv->rxd_ops == NULL) { wiphy_err(hw->wiphy, "Driver does not have AP firmware image support for this hardware\n"); + rc = -ENOENT; goto err_stop_firmware; } } else { @@ -5901,6 +5902,7 @@ static int mwl8k_probe(struct pci_dev *pdev, priv->sram = pci_iomap(pdev, 0, 0x10000); if (priv->sram == NULL) { wiphy_err(hw->wiphy, "Cannot map device SRAM\n"); + rc = -EIO; goto err_iounmap; } @@ -5913,6 +5915,7 @@ static int mwl8k_probe(struct pci_dev *pdev, priv->regs = pci_iomap(pdev, 2, 0x10000); if (priv->regs == NULL) { wiphy_err(hw->wiphy, "Cannot map device registers\n"); + rc = -EIO; goto err_iounmap; } } -- cgit v1.2.3 From 662845057f2d063461c88a97b737ec7f66daece0 Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 19 Jan 2013 16:56:34 +0400 Subject: iwlegacy: don't return zero on failure paths in il4965_pci_probe() If hardware is not ready, il4965_pci_probe() breaks off initialization, deallocates all resources, but returns zero. The patch adds -EIO as return value in this case. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: John W. Linville --- drivers/net/wireless/iwlegacy/4965-mac.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 10fc2493f415..f1dc04006564 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -6556,6 +6556,7 @@ il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) il4965_prepare_card_hw(il); if (!il->hw_ready) { IL_WARN("Failed, HW not ready\n"); + err = -EIO; goto out_iounmap; } -- cgit v1.2.3 From eee569e403861392dc693ab984ede5f0610dde29 Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Sat, 19 Jan 2013 13:56:36 +0100 Subject: net: wireless/rtlwifi: fix uninitialized variable issue The use of variable packet_beacon might be uninitialized in the three files. Signed-off-by: Cong Ding Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/rtl8192de/trx.c | 2 +- drivers/net/wireless/rtlwifi/rtl8192se/trx.c | 2 +- drivers/net/wireless/rtlwifi/rtl8723ae/trx.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c index f9f3861046c1..3c8754e9b394 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c @@ -452,7 +452,7 @@ static void _rtl92de_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *praddr; u16 type, cfc; __le16 fc; - bool packet_matchbssid, packet_toself, packet_beacon; + bool packet_matchbssid, packet_toself, packet_beacon = false; tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift; hdr = (struct ieee80211_hdr *)tmp_buf; diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index 0e9f6ebf078a..18645146abe1 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -480,7 +480,7 @@ static void _rtl92se_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *praddr; __le16 fc; u16 type, cfc; - bool packet_matchbssid, packet_toself, packet_beacon; + bool packet_matchbssid, packet_toself, packet_beacon = false; tmp_buf = skb->data + pstats->rx_drvinfo_size + pstats->rx_bufshift; diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c index 87331d826d73..6645a506a603 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c @@ -247,7 +247,7 @@ static void _rtl8723ae_translate_rx_signal_stuff(struct ieee80211_hw *hw, u8 *psaddr; __le16 fc; u16 type; - bool packet_matchbssid, packet_toself, packet_beacon; + bool packet_matchbssid, packet_toself, packet_beacon = false; tmp_buf = skb->data + pstatus->rx_drvinfo_size + pstatus->rx_bufshift; -- cgit v1.2.3 From 0a62acb1c9da58b54cb1c9fa6604a36507a61d48 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:52 +0100 Subject: ath9k: stop rx after tx Completing frame transmission can fail if the rx engine is stopped prematurely, as the hw might be waiting for an ACK from the other side. Shutting down tx before rx might make the DMA shutdown more reliable. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 32417fd4bf5a..407199ba79db 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -196,10 +196,10 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); - if (!ath_stoprecv(sc)) + if (!ath_drain_all_txq(sc, retry_tx)) ret = false; - if (!ath_drain_all_txq(sc, retry_tx)) + if (!ath_stoprecv(sc)) ret = false; if (!flush) { -- cgit v1.2.3 From 1381559ba48a04ca7c98f1b4c487bd44d0b75db5 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:53 +0100 Subject: ath9k: clean up processing of pending tx frames on reset Dropping packets from aggregation sessions is usually not a good idea, as it might upset the synchronization of the BlockAck receive window of the remote node. The use of the retry_tx parameter to reset/tx-drain functions also seemed a bit arbitrary. This patch removes this parameter altogether and ensures that pending tx frames are not dropped for no good reason. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ath9k.h | 5 ++-- drivers/net/wireless/ath/ath9k/beacon.c | 2 +- drivers/net/wireless/ath/ath9k/main.c | 41 +++++++++++++++---------------- drivers/net/wireless/ath/ath9k/xmit.c | 43 ++++++++------------------------- 4 files changed, 32 insertions(+), 59 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 094a9322f092..885affd28f6e 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -334,9 +334,8 @@ void ath_txq_lock(struct ath_softc *sc, struct ath_txq *txq); void ath_txq_unlock(struct ath_softc *sc, struct ath_txq *txq); void ath_txq_unlock_complete(struct ath_softc *sc, struct ath_txq *txq); void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq); -bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx); -void ath_draintxq(struct ath_softc *sc, - struct ath_txq *txq, bool retry_tx); +bool ath_drain_all_txq(struct ath_softc *sc); +void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq); void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an); void ath_tx_node_cleanup(struct ath_softc *sc, struct ath_node *an); void ath_txq_schedule(struct ath_softc *sc, struct ath_txq *txq); diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index 531fffd801a3..a129f83806f3 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -198,7 +198,7 @@ static struct ath_buf *ath9k_beacon_generate(struct ieee80211_hw *hw, if (sc->nvifs > 1) { ath_dbg(common, BEACON, "Flushing previous cabq traffic\n"); - ath_draintxq(sc, cabq, false); + ath_draintxq(sc, cabq); } } diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 407199ba79db..3e5082c5f5f0 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -182,7 +182,7 @@ static void ath_restart_work(struct ath_softc *sc) ath_start_ani(sc); } -static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) +static bool ath_prepare_reset(struct ath_softc *sc, bool flush) { struct ath_hw *ah = sc->sc_ah; bool ret = true; @@ -196,7 +196,7 @@ static bool ath_prepare_reset(struct ath_softc *sc, bool retry_tx, bool flush) ath9k_debug_samp_bb_mac(sc); ath9k_hw_disable_interrupts(ah); - if (!ath_drain_all_txq(sc, retry_tx)) + if (!ath_drain_all_txq(sc)) ret = false; if (!ath_stoprecv(sc)) @@ -255,8 +255,7 @@ static bool ath_complete_reset(struct ath_softc *sc, bool start) return true; } -static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, - bool retry_tx) +static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan) { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(ah); @@ -280,7 +279,7 @@ static int ath_reset_internal(struct ath_softc *sc, struct ath9k_channel *hchan, hchan = ah->curchan; } - if (!ath_prepare_reset(sc, retry_tx, flush)) + if (!ath_prepare_reset(sc, flush)) fastcc = false; ath_dbg(common, CONFIG, "Reset to %u MHz, HT40: %d fastcc: %d\n", @@ -319,7 +318,7 @@ static int ath_set_channel(struct ath_softc *sc, struct ieee80211_hw *hw, if (test_bit(SC_OP_INVALID, &sc->sc_flags)) return -EIO; - r = ath_reset_internal(sc, hchan, false); + r = ath_reset_internal(sc, hchan); return r; } @@ -549,23 +548,21 @@ chip_reset: #undef SCHED_INTR } -static int ath_reset(struct ath_softc *sc, bool retry_tx) +static int ath_reset(struct ath_softc *sc) { - int r; + int i, r; ath9k_ps_wakeup(sc); - r = ath_reset_internal(sc, NULL, retry_tx); + r = ath_reset_internal(sc, NULL); - if (retry_tx) { - int i; - for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { - if (ATH_TXQ_SETUP(sc, i)) { - spin_lock_bh(&sc->tx.txq[i].axq_lock); - ath_txq_schedule(sc, &sc->tx.txq[i]); - spin_unlock_bh(&sc->tx.txq[i].axq_lock); - } - } + for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) { + if (!ATH_TXQ_SETUP(sc, i)) + continue; + + spin_lock_bh(&sc->tx.txq[i].axq_lock); + ath_txq_schedule(sc, &sc->tx.txq[i]); + spin_unlock_bh(&sc->tx.txq[i].axq_lock); } ath9k_ps_restore(sc); @@ -586,7 +583,7 @@ void ath_reset_work(struct work_struct *work) { struct ath_softc *sc = container_of(work, struct ath_softc, hw_reset_work); - ath_reset(sc, true); + ath_reset(sc); } /**********************/ @@ -804,7 +801,7 @@ static void ath9k_stop(struct ieee80211_hw *hw) ath9k_hw_cfg_gpio_input(ah, ah->led_pin); } - ath_prepare_reset(sc, false, true); + ath_prepare_reset(sc, true); if (sc->rx.frag) { dev_kfree_skb_any(sc->rx.frag); @@ -1816,11 +1813,11 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop) if (drop) { ath9k_ps_wakeup(sc); spin_lock_bh(&sc->sc_pcu_lock); - drain_txq = ath_drain_all_txq(sc, false); + drain_txq = ath_drain_all_txq(sc); spin_unlock_bh(&sc->sc_pcu_lock); if (!drain_txq) - ath_reset(sc, false); + ath_reset(sc); ath9k_ps_restore(sc); ieee80211_wake_queues(hw); diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index ca4a0341294f..ac9ee67fbaa9 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -378,7 +378,7 @@ static void ath_tx_count_frames(struct ath_softc *sc, struct ath_buf *bf, static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, struct ath_buf *bf, struct list_head *bf_q, - struct ath_tx_status *ts, int txok, bool retry) + struct ath_tx_status *ts, int txok) { struct ath_node *an = NULL; struct sk_buff *skb; @@ -490,7 +490,7 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, } else if (!isaggr && txok) { /* transmit completion */ acked_cnt++; - } else if ((tid->state & AGGR_CLEANUP) || !retry) { + } else if (tid->state & AGGR_CLEANUP) { /* * cleanup in progress, just fail * the un-acked sub-frames @@ -1331,23 +1331,6 @@ void ath_tx_aggr_resume(struct ath_softc *sc, struct ieee80211_sta *sta, u16 tid /* Queue Management */ /********************/ -static void ath_txq_drain_pending_buffers(struct ath_softc *sc, - struct ath_txq *txq) -{ - struct ath_atx_ac *ac, *ac_tmp; - struct ath_atx_tid *tid, *tid_tmp; - - list_for_each_entry_safe(ac, ac_tmp, &txq->axq_acq, list) { - list_del(&ac->list); - ac->sched = false; - list_for_each_entry_safe(tid, tid_tmp, &ac->tid_q, list) { - list_del(&tid->list); - tid->sched = false; - ath_tid_drain(sc, txq, tid); - } - } -} - struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype) { struct ath_hw *ah = sc->sc_ah; @@ -1477,7 +1460,7 @@ static bool bf_is_ampdu_not_probing(struct ath_buf *bf) } static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, - struct list_head *list, bool retry_tx) + struct list_head *list) { struct ath_buf *bf, *lastbf; struct list_head bf_head; @@ -1505,8 +1488,7 @@ static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, txq->axq_ampdu_depth--; if (bf_isampdu(bf)) - ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, 0, - retry_tx); + ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, 0); else ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); } @@ -1518,7 +1500,7 @@ static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, * This assumes output has been stopped and * we do not need to block ath_tx_tasklet. */ -void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx) +void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq) { ath_txq_lock(sc, txq); @@ -1526,8 +1508,7 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx) int idx = txq->txq_tailidx; while (!list_empty(&txq->txq_fifo[idx])) { - ath_drain_txq_list(sc, txq, &txq->txq_fifo[idx], - retry_tx); + ath_drain_txq_list(sc, txq, &txq->txq_fifo[idx]); INCR(idx, ATH_TXFIFO_DEPTH); } @@ -1536,16 +1517,12 @@ void ath_draintxq(struct ath_softc *sc, struct ath_txq *txq, bool retry_tx) txq->axq_link = NULL; txq->axq_tx_inprogress = false; - ath_drain_txq_list(sc, txq, &txq->axq_q, retry_tx); - - /* flush any pending frames if aggregation is enabled */ - if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) && !retry_tx) - ath_txq_drain_pending_buffers(sc, txq); + ath_drain_txq_list(sc, txq, &txq->axq_q); ath_txq_unlock_complete(sc, txq); } -bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) +bool ath_drain_all_txq(struct ath_softc *sc) { struct ath_hw *ah = sc->sc_ah; struct ath_common *common = ath9k_hw_common(sc->sc_ah); @@ -1581,7 +1558,7 @@ bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx) */ txq = &sc->tx.txq[i]; txq->stopped = false; - ath_draintxq(sc, txq, retry_tx); + ath_draintxq(sc, txq); } return !npend; @@ -2191,7 +2168,7 @@ static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok); ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok); } else - ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok, true); + ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok); if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) ath_txq_schedule(sc, txq); -- cgit v1.2.3 From 81b519504f3b2e72c8ff282a03ecc01879f28e31 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:54 +0100 Subject: ath9k: use ath_tx_process_buffer instead of open-coding similar code Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 69 ++++++++++++++++------------------- 1 file changed, 32 insertions(+), 37 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index ac9ee67fbaa9..feacaafee959 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -604,6 +604,37 @@ static void ath_tx_complete_aggr(struct ath_softc *sc, struct ath_txq *txq, ath9k_queue_reset(sc, RESET_TYPE_TX_ERROR); } +static bool bf_is_ampdu_not_probing(struct ath_buf *bf) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu); + return bf_isampdu(bf) && !(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE); +} + +static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, + struct ath_tx_status *ts, struct ath_buf *bf, + struct list_head *bf_head) +{ + bool txok, flush; + + txok = !(ts->ts_status & ATH9K_TXERR_MASK); + flush = !!(ts->ts_status & ATH9K_TX_FLUSH); + txq->axq_tx_inprogress = false; + + txq->axq_depth--; + if (bf_is_ampdu_not_probing(bf)) + txq->axq_ampdu_depth--; + + if (!bf_isampdu(bf)) { + if (!flush) + ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok); + ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok); + } else + ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok); + + if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) && !flush) + ath_txq_schedule(sc, txq); +} + static bool ath_lookup_legacy(struct ath_buf *bf) { struct sk_buff *skb; @@ -1453,12 +1484,6 @@ int ath_cabq_update(struct ath_softc *sc) return 0; } -static bool bf_is_ampdu_not_probing(struct ath_buf *bf) -{ - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(bf->bf_mpdu); - return bf_isampdu(bf) && !(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE); -} - static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, struct list_head *list) { @@ -1482,15 +1507,7 @@ static void ath_drain_txq_list(struct ath_softc *sc, struct ath_txq *txq, lastbf = bf->bf_lastbf; list_cut_position(&bf_head, list, &lastbf->list); - - txq->axq_depth--; - if (bf_is_ampdu_not_probing(bf)) - txq->axq_ampdu_depth--; - - if (bf_isampdu(bf)) - ath_tx_complete_aggr(sc, txq, bf, &bf_head, &ts, 0); - else - ath_tx_complete_buf(sc, bf, txq, &bf_head, &ts, 0); + ath_tx_process_buffer(sc, txq, &ts, bf, &bf_head); } } @@ -2152,28 +2169,6 @@ static void ath_tx_rc_status(struct ath_softc *sc, struct ath_buf *bf, tx_info->status.rates[tx_rateindex].count = ts->ts_longretry + 1; } -static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, - struct ath_tx_status *ts, struct ath_buf *bf, - struct list_head *bf_head) -{ - int txok; - - txq->axq_depth--; - txok = !(ts->ts_status & ATH9K_TXERR_MASK); - txq->axq_tx_inprogress = false; - if (bf_is_ampdu_not_probing(bf)) - txq->axq_ampdu_depth--; - - if (!bf_isampdu(bf)) { - ath_tx_rc_status(sc, bf, ts, 1, txok ? 0 : 1, txok); - ath_tx_complete_buf(sc, bf, txq, bf_head, ts, txok); - } else - ath_tx_complete_aggr(sc, txq, bf, bf_head, ts, txok); - - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) - ath_txq_schedule(sc, txq); -} - static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq) { struct ath_hw *ah = sc->sc_ah; -- cgit v1.2.3 From 0166b4beec575f9740b7a0843675173c2e00cdbc Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:55 +0100 Subject: ath9k_hw: make the initval parameter to ath9k_hw_write_array const Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 2 +- drivers/net/wireless/ath/ath9k/hw.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index a7448d1f5460..0d84c1cd354f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -203,7 +203,7 @@ void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan, udelay(hw_delay + BASE_ACTIVATE_DELAY); } -void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array, +void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array, int column, unsigned int *writecnt) { int r; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 195613ff72ee..13b97e713f9b 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -1013,7 +1013,7 @@ void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna); void ath9k_hw_synth_delay(struct ath_hw *ah, struct ath9k_channel *chan, int hw_delay); bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout); -void ath9k_hw_write_array(struct ath_hw *ah, struct ar5416IniArray *array, +void ath9k_hw_write_array(struct ath_hw *ah, const struct ar5416IniArray *array, int column, unsigned int *writecnt); u32 ath9k_hw_reverse_bits(u32 val, u32 n); u16 ath9k_hw_computetxtime(struct ath_hw *ah, -- cgit v1.2.3 From f5ffe23aa0a8f6512952cf393daf86cbd6e4685d Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:57 +0100 Subject: ath9k_hw: remove ath9k_hw_ani_setup and its variables They are no longer needed for ANI functionality Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ani.c | 17 ----------------- drivers/net/wireless/ath/ath9k/ani.h | 1 - drivers/net/wireless/ath/ath9k/hw.c | 4 +--- drivers/net/wireless/ath/ath9k/hw.h | 4 ---- 4 files changed, 1 insertion(+), 25 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index e09ec40ce71a..297828791167 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -489,23 +489,6 @@ void ath9k_hw_disable_mib_counters(struct ath_hw *ah) } EXPORT_SYMBOL(ath9k_hw_disable_mib_counters); -void ath9k_hw_ani_setup(struct ath_hw *ah) -{ - int i; - - static const int totalSizeDesired[] = { -55, -55, -55, -55, -62 }; - static const int coarseHigh[] = { -14, -14, -14, -14, -12 }; - static const int coarseLow[] = { -64, -64, -64, -64, -70 }; - static const int firpwr[] = { -78, -78, -78, -78, -80 }; - - for (i = 0; i < 5; i++) { - ah->totalSizeDesired[i] = totalSizeDesired[i]; - ah->coarse_high[i] = coarseHigh[i]; - ah->coarse_low[i] = coarseLow[i]; - ah->firpwr[i] = firpwr[i]; - } -} - void ath9k_hw_ani_init(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h index 1485bf5e3518..385bdba8ae50 100644 --- a/drivers/net/wireless/ath/ath9k/ani.h +++ b/drivers/net/wireless/ath/ath9k/ani.h @@ -147,7 +147,6 @@ struct ar5416Stats { void ath9k_enable_mib_counters(struct ath_hw *ah); void ath9k_hw_disable_mib_counters(struct ath_hw *ah); -void ath9k_hw_ani_setup(struct ath_hw *ah); void ath9k_hw_ani_init(struct ath_hw *ah); #endif /* ANI_H */ diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 0d84c1cd354f..42cf3c7f1e25 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -549,10 +549,8 @@ static int ath9k_hw_post_init(struct ath_hw *ah) ah->eep_ops->get_eeprom_ver(ah), ah->eep_ops->get_eeprom_rev(ah)); - if (ah->config.enable_ani) { - ath9k_hw_ani_setup(ah); + if (ah->config.enable_ani) ath9k_hw_ani_init(ah); - } return 0; } diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 13b97e713f9b..0a3a1af007f7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -864,10 +864,6 @@ struct ath_hw { /* ANI */ u32 proc_phyerr; u32 aniperiod; - int totalSizeDesired[5]; - int coarse_high[5]; - int coarse_low[5]; - int firpwr[5]; enum ath9k_ani_cmd ani_function; u32 ani_skip_count; -- cgit v1.2.3 From 9dbac67da314ccdab3bb7f429b4936e59d5389b7 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:58 +0100 Subject: ath9k_hw: reduce struct ar5416AniState size It is kept per-channel, so removing unnecessary (or constant) fields from it can save quite a bit of memory. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ani.c | 13 ++++++------- drivers/net/wireless/ath/ath9k/ani.h | 7 ------- 2 files changed, 6 insertions(+), 14 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index 297828791167..a9218a198758 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -152,7 +152,8 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel, ath_dbg(common, ANI, "**** ofdmlevel %d=>%d, rssi=%d[lo=%d hi=%d]\n", aniState->ofdmNoiseImmunityLevel, immunityLevel, BEACON_RSSI(ah), - aniState->rssiThrLow, aniState->rssiThrHigh); + ATH9K_ANI_RSSI_THR_LOW, + ATH9K_ANI_RSSI_THR_HIGH); if (!scan) aniState->ofdmNoiseImmunityLevel = immunityLevel; @@ -173,7 +174,7 @@ static void ath9k_hw_set_ofdm_nil(struct ath_hw *ah, u8 immunityLevel, weak_sig = entry_ofdm->ofdm_weak_signal_on; if (ah->opmode == NL80211_IFTYPE_STATION && - BEACON_RSSI(ah) <= aniState->rssiThrHigh) + BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_HIGH) weak_sig = true; if (aniState->ofdmWeakSigDetect != weak_sig) @@ -216,11 +217,11 @@ static void ath9k_hw_set_cck_nil(struct ath_hw *ah, u_int8_t immunityLevel, ath_dbg(common, ANI, "**** ccklevel %d=>%d, rssi=%d[lo=%d hi=%d]\n", aniState->cckNoiseImmunityLevel, immunityLevel, - BEACON_RSSI(ah), aniState->rssiThrLow, - aniState->rssiThrHigh); + BEACON_RSSI(ah), ATH9K_ANI_RSSI_THR_LOW, + ATH9K_ANI_RSSI_THR_HIGH); if (ah->opmode == NL80211_IFTYPE_STATION && - BEACON_RSSI(ah) <= aniState->rssiThrLow && + BEACON_RSSI(ah) <= ATH9K_ANI_RSSI_THR_LOW && immunityLevel > ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI) immunityLevel = ATH9K_ANI_CCK_MAX_LEVEL_LOW_RSSI; @@ -514,8 +515,6 @@ void ath9k_hw_ani_init(struct ath_hw *ah) ani->ofdmsTurn = true; - ani->rssiThrHigh = ATH9K_ANI_RSSI_THR_HIGH; - ani->rssiThrLow = ATH9K_ANI_RSSI_THR_LOW; ani->ofdmWeakSigDetect = ATH9K_ANI_USE_OFDM_WEAK_SIG; ani->cckNoiseImmunityLevel = ATH9K_ANI_CCK_DEF_LEVEL; ani->ofdmNoiseImmunityLevel = ATH9K_ANI_OFDM_DEF_LEVEL; diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h index 385bdba8ae50..dddb1361039a 100644 --- a/drivers/net/wireless/ath/ath9k/ani.h +++ b/drivers/net/wireless/ath/ath9k/ani.h @@ -104,7 +104,6 @@ struct ath9k_ani_default { }; struct ar5416AniState { - struct ath9k_channel *c; u8 noiseImmunityLevel; u8 ofdmNoiseImmunityLevel; u8 cckNoiseImmunityLevel; @@ -113,15 +112,9 @@ struct ar5416AniState { u8 spurImmunityLevel; u8 firstepLevel; u8 ofdmWeakSigDetect; - u8 cckWeakSigThreshold; u32 listenTime; - int32_t rssiThrLow; - int32_t rssiThrHigh; u32 ofdmPhyErrCount; u32 cckPhyErrCount; - int16_t pktRssi[2]; - int16_t ofdmErrRssi[2]; - int16_t cckErrRssi[2]; struct ath9k_ani_default iniDef; }; -- cgit v1.2.3 From c5e818ef081c4144177fdbdeed154332cd7e4d7a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 20 Jan 2013 18:51:59 +0100 Subject: ath9k_hw: remove a useless WARN_ON &ah->curchan->ani can never be NULL Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ani.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index a9218a198758..7ecd40f07a74 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -419,9 +419,6 @@ void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan) return; aniState = &ah->curchan->ani; - if (WARN_ON(!aniState)) - return; - if (!ath9k_hw_ani_read_counters(ah)) return; -- cgit v1.2.3