From 4da1fda1653204901ca8d7de3eac892eb312ee4c Mon Sep 17 00:00:00 2001 From: Francesco Dolcini Date: Thu, 22 Sep 2022 14:43:06 +0200 Subject: drm/bridge: lt8912b: clarify lvds output status Add comments on the lt8912_write_lvds_config() config to document the current settings and to make it clear that this is a hardcoded configuration not relevant for the HDMI output (could be removed without affecting the HDMI port). No changes on the actual register writes. Upstream-Status: Backport [fc44f3636a4db6544fd1532280e8adcd1ef13ba2] Signed-off-by: Francesco Dolcini Signed-off-by: Philippe Schenker Acked-by: Adrien Grassein Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20220922124306.34729-5-dev@pschenker.ch --- drivers/gpu/drm/bridge/lontium-lt8912b.c | 26 +++++++++++++++++--------- 1 file changed, 17 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/bridge/lontium-lt8912b.c b/drivers/gpu/drm/bridge/lontium-lt8912b.c index bfc0ff422891..95ac14c09b33 100644 --- a/drivers/gpu/drm/bridge/lontium-lt8912b.c +++ b/drivers/gpu/drm/bridge/lontium-lt8912b.c @@ -163,24 +163,32 @@ static int lt8912_write_rxlogicres_config(struct lt8912 *lt) return ret; }; +/* enable LVDS output with some hardcoded configuration, not required for the HDMI output */ static int lt8912_write_lvds_config(struct lt8912 *lt) { const struct reg_sequence seq[] = { + // lvds power up {0x44, 0x30}, {0x51, 0x05}, - {0x50, 0x24}, - {0x51, 0x2d}, - {0x52, 0x04}, - {0x69, 0x0e}, + + // core pll bypass + {0x50, 0x24}, // cp=50uA + {0x51, 0x2d}, // Pix_clk as reference, second order passive LPF PLL + {0x52, 0x04}, // loopdiv=0, use second-order PLL + {0x69, 0x0e}, // CP_PRESET_DIV_RATIO {0x69, 0x8e}, {0x6a, 0x00}, - {0x6c, 0xb8}, + {0x6c, 0xb8}, // RGD_CP_SOFT_K_EN,RGD_CP_SOFT_K[13:8] {0x6b, 0x51}, - {0x04, 0xfb}, + + {0x04, 0xfb}, // core pll reset {0x04, 0xff}, - {0x7f, 0x00}, - {0xa8, 0x13}, - {0x02, 0xf7}, + + // scaler bypass + {0x7f, 0x00}, // disable scaler + {0xa8, 0x13}, // 0x13: JEIDA, 0x33: VESA + + {0x02, 0xf7}, // lvds pll reset {0x02, 0xff}, {0x03, 0xcf}, {0x03, 0xff}, -- cgit v1.2.3