From efad8396e906d095521791e0408293c101543e50 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Mon, 8 May 2017 21:36:37 -0700 Subject: wcn36xx: Close SMD channel on device removal The SMD channel is not the primary WCNSS channel and must explicitly be closed as the device is removed, or the channel will already by open on a subsequent probe call in e.g. the case of reloading the kernel module. This issue was introduced because I simplified the underlying SMD implementation while the SMD adaptions of the driver sat on the mailing list, but missed to update these patches. The patch does however only apply back to the transition to rpmsg, hence the limited Fixes. Fixes: 5052de8deff5 ("soc: qcom: smd: Transition client drivers from smd to rpmsg") Reported-by: Eyal Ilsar Signed-off-by: Bjorn Andersson Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/wcn36xx/main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c index d5e993dc9b23..517a315e259b 100644 --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1271,6 +1271,8 @@ static int wcn36xx_remove(struct platform_device *pdev) qcom_smem_state_put(wcn->tx_enable_state); qcom_smem_state_put(wcn->tx_rings_empty_state); + rpmsg_destroy_ept(wcn->smd_channel); + iounmap(wcn->dxe_base); iounmap(wcn->ccu_base); -- cgit v1.2.3 From 1dbf647f31751a4e94fa0435c34f0f5ad5ce0adc Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Fri, 26 May 2017 13:02:55 +0200 Subject: brcmfmac: fix alignment configuration on host using 64-bit DMA For SDIO the alignment requirement for transfers from device to host is configured in firmware. This configuration is limited to minimum of 4-byte alignment. However, this is not correct for platforms using 64-bit DMA when the minimum alignment should be 8 bytes. This issue appeared when the ALIGNMENT definition was set according the DMA configuration. The configuration in firmware was not using that macro defintion, but a hardcoded value of 4. Hence the driver reported alignment failures for data coming from the device and causing transfers to fail. Fixes: 6e84ab604bde ("brcmfmac: properly align buffers on certain platforms Reported-by: Hans de Goede Tested-by: Hans de Goede Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Hans de Goede Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index fc64b8913aa6..e03450059b06 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -3422,7 +3422,7 @@ static int brcmf_sdio_bus_preinit(struct device *dev) /* otherwise, set txglomalign */ value = sdiodev->settings->bus.sdio.sd_sgentry_align; /* SDIO ADMA requires at least 32 bit alignment */ - value = max_t(u32, value, 4); + value = max_t(u32, value, ALIGNMENT); err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value, sizeof(u32)); } -- cgit v1.2.3 From ea42d1cbe3f067fb714c3ec3e1792fa273b99561 Mon Sep 17 00:00:00 2001 From: Gregory Greenman Date: Mon, 6 Mar 2017 11:15:41 +0200 Subject: iwlwifi: mvm: rs: start using LQ command color Up until now, the driver was comparing the rate reported by the FW and the rate of the latest LQ command to avoid processing data belonging to the old LQ command. Recently, FW changed the meaning of the initial rate field in tx response and it holds the actual rate (which is not necessarily the initial rate of LQ's rate table). Use instead LQ cmd color to be able to filter out tx responses/BA notifications which where sent during earlier LQ commands' time frame. This fixes some throughput degradation in noisy environments. Signed-off-by: Gregory Greenman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rs.h | 5 +++ drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h | 3 ++ drivers/net/wireless/intel/iwlwifi/mvm/rs.c | 46 ++++++---------------- drivers/net/wireless/intel/iwlwifi/mvm/rs.h | 15 +++++++ drivers/net/wireless/intel/iwlwifi/mvm/sta.h | 2 + drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 12 +++++- 6 files changed, 47 insertions(+), 36 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rs.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rs.h index 1b7d265ffb0a..a10c6aae9ab9 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rs.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-rs.h @@ -307,6 +307,11 @@ enum { /* Bit 1-3: LQ command color. Used to match responses to LQ commands */ #define LQ_FLAG_COLOR_POS 1 #define LQ_FLAG_COLOR_MSK (7 << LQ_FLAG_COLOR_POS) +#define LQ_FLAG_COLOR_GET(_f) (((_f) & LQ_FLAG_COLOR_MSK) >>\ + LQ_FLAG_COLOR_POS) +#define LQ_FLAGS_COLOR_INC(_c) ((((_c) + 1) << LQ_FLAG_COLOR_POS) &\ + LQ_FLAG_COLOR_MSK) +#define LQ_FLAG_COLOR_SET(_f, _c) ((_c) | ((_f) & ~LQ_FLAG_COLOR_MSK)) /* Bit 4-5: Tx RTS BW Signalling * (0) No RTS BW signalling diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h index 81b98915b1a4..1360ebfdc51b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-api-tx.h @@ -519,8 +519,11 @@ struct agg_tx_status { * bit-7 invalid rate indication */ #define TX_RES_INIT_RATE_INDEX_MSK 0x0f +#define TX_RES_RATE_TABLE_COLOR_POS 4 #define TX_RES_RATE_TABLE_COLOR_MSK 0x70 #define TX_RES_INV_RATE_INDEX_MSK 0x80 +#define TX_RES_RATE_TABLE_COL_GET(_f) (((_f) & TX_RES_RATE_TABLE_COLOR_MSK) >>\ + TX_RES_RATE_TABLE_COLOR_POS) #define IWL_MVM_TX_RES_GET_TID(_ra_tid) ((_ra_tid) & 0x0f) #define IWL_MVM_TX_RES_GET_RA(_ra_tid) ((_ra_tid) >> 4) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c index 7788eefcd2bd..aa785cf3cf68 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.c @@ -2,7 +2,7 @@ * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH - * Copyright(c) 2016 Intel Deutschland GmbH + * Copyright(c) 2016 - 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as @@ -1083,34 +1083,6 @@ static void rs_get_lower_rate_down_column(struct iwl_lq_sta *lq_sta, rs_get_lower_rate_in_column(lq_sta, rate); } -/* Check if both rates are identical - * allow_ant_mismatch enables matching a SISO rate on ANT_A or ANT_B - * with a rate indicating STBC/BFER and ANT_AB. - */ -static inline bool rs_rate_equal(struct rs_rate *a, - struct rs_rate *b, - bool allow_ant_mismatch) - -{ - bool ant_match = (a->ant == b->ant) && (a->stbc == b->stbc) && - (a->bfer == b->bfer); - - if (allow_ant_mismatch) { - if (a->stbc || a->bfer) { - WARN_ONCE(a->ant != ANT_AB, "stbc %d bfer %d ant %d", - a->stbc, a->bfer, a->ant); - ant_match |= (b->ant == ANT_A || b->ant == ANT_B); - } else if (b->stbc || b->bfer) { - WARN_ONCE(b->ant != ANT_AB, "stbc %d bfer %d ant %d", - b->stbc, b->bfer, b->ant); - ant_match |= (a->ant == ANT_A || a->ant == ANT_B); - } - } - - return (a->type == b->type) && (a->bw == b->bw) && (a->sgi == b->sgi) && - (a->ldpc == b->ldpc) && (a->index == b->index) && ant_match; -} - /* Check if both rates share the same column */ static inline bool rs_rate_column_match(struct rs_rate *a, struct rs_rate *b) @@ -1182,12 +1154,12 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, u32 lq_hwrate; struct rs_rate lq_rate, tx_resp_rate; struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; - u8 reduced_txp = (uintptr_t)info->status.status_driver_data[0]; + u32 tlc_info = (uintptr_t)info->status.status_driver_data[0]; + u8 reduced_txp = tlc_info & RS_DRV_DATA_TXP_MSK; + u8 lq_color = RS_DRV_DATA_LQ_COLOR_GET(tlc_info); u32 tx_resp_hwrate = (uintptr_t)info->status.status_driver_data[1]; struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta); struct iwl_lq_sta *lq_sta = &mvmsta->lq_sta; - bool allow_ant_mismatch = fw_has_api(&mvm->fw->ucode_capa, - IWL_UCODE_TLV_API_LQ_SS_PARAMS); /* Treat uninitialized rate scaling data same as non-existing. */ if (!lq_sta) { @@ -1262,10 +1234,10 @@ void iwl_mvm_rs_tx_status(struct iwl_mvm *mvm, struct ieee80211_sta *sta, rs_rate_from_ucode_rate(lq_hwrate, info->band, &lq_rate); /* Here we actually compare this rate to the latest LQ command */ - if (!rs_rate_equal(&tx_resp_rate, &lq_rate, allow_ant_mismatch)) { + if (lq_color != LQ_FLAG_COLOR_GET(table->flags)) { IWL_DEBUG_RATE(mvm, - "initial tx resp rate 0x%x does not match 0x%x\n", - tx_resp_hwrate, lq_hwrate); + "tx resp color 0x%x does not match 0x%x\n", + lq_color, LQ_FLAG_COLOR_GET(table->flags)); /* * Since rates mis-match, the last LQ command may have failed. @@ -3326,6 +3298,7 @@ static void rs_build_rates_table(struct iwl_mvm *mvm, u8 valid_tx_ant = 0; struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; bool toggle_ant = false; + u32 color; memcpy(&rate, initial_rate, sizeof(rate)); @@ -3380,6 +3353,9 @@ static void rs_build_rates_table(struct iwl_mvm *mvm, num_rates, num_retries, valid_tx_ant, toggle_ant); + /* update the color of the LQ command (as a counter at bits 1-3) */ + color = LQ_FLAGS_COLOR_INC(LQ_FLAG_COLOR_GET(lq_cmd->flags)); + lq_cmd->flags = LQ_FLAG_COLOR_SET(lq_cmd->flags, color); } struct rs_bfer_active_iter_data { diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h index ee207f2c0a90..3abde1cb0303 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rs.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs.h @@ -2,6 +2,7 @@ * * Copyright(c) 2003 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2015 Intel Mobile Communications GmbH + * Copyright(c) 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as @@ -357,6 +358,20 @@ struct iwl_lq_sta { } pers; }; +/* ieee80211_tx_info's status_driver_data[0] is packed with lq color and txp + * Note, it's iwlmvm <-> mac80211 interface. + * bits 0-7: reduced tx power + * bits 8-10: LQ command's color + */ +#define RS_DRV_DATA_TXP_MSK 0xff +#define RS_DRV_DATA_LQ_COLOR_POS 8 +#define RS_DRV_DATA_LQ_COLOR_MSK (7 << RS_DRV_DATA_LQ_COLOR_POS) +#define RS_DRV_DATA_LQ_COLOR_GET(_f) (((_f) & RS_DRV_DATA_LQ_COLOR_MSK) >>\ + RS_DRV_DATA_LQ_COLOR_POS) +#define RS_DRV_DATA_PACK(_c, _p) ((void *)(uintptr_t)\ + (((uintptr_t)_p) |\ + ((_c) << RS_DRV_DATA_LQ_COLOR_POS))) + /* Initialize station's rate scaling information after adding station */ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, enum nl80211_band band, bool init); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h index 2716cb5483bf..ad62b67dceb2 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.h @@ -313,6 +313,7 @@ enum iwl_mvm_agg_state { * This is basically (last acked packet++). * @rate_n_flags: Rate at which Tx was attempted. Holds the data between the * Tx response (TX_CMD), and the block ack notification (COMPRESSED_BA). + * @lq_color: the color of the LQ command as it appears in tx response. * @amsdu_in_ampdu_allowed: true if A-MSDU in A-MPDU is allowed. * @state: state of the BA agreement establishment / tear down. * @txq_id: Tx queue used by the BA session / DQA @@ -331,6 +332,7 @@ struct iwl_mvm_tid_data { u16 next_reclaimed; /* The rest is Tx AGG related */ u32 rate_n_flags; + u8 lq_color; bool amsdu_in_ampdu_allowed; enum iwl_mvm_agg_state state; u16 txq_id; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index bcaceb64a6e8..f21901cd4a4f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -1323,6 +1323,7 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta; struct sk_buff_head skbs; u8 skb_freed = 0; + u8 lq_color; u16 next_reclaimed, seq_ctl; bool is_ndp = false; @@ -1405,8 +1406,9 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, info->status.tx_time = le16_to_cpu(tx_resp->wireless_media_time); BUILD_BUG_ON(ARRAY_SIZE(info->status.status_driver_data) < 1); + lq_color = TX_RES_RATE_TABLE_COL_GET(tx_resp->tlc_info); info->status.status_driver_data[0] = - (void *)(uintptr_t)tx_resp->reduced_tpc; + RS_DRV_DATA_PACK(lq_color, tx_resp->reduced_tpc); ieee80211_tx_status(mvm->hw, skb); } @@ -1638,6 +1640,9 @@ static void iwl_mvm_rx_tx_cmd_agg(struct iwl_mvm *mvm, le32_to_cpu(tx_resp->initial_rate); mvmsta->tid_data[tid].tx_time = le16_to_cpu(tx_resp->wireless_media_time); + mvmsta->tid_data[tid].lq_color = + (tx_resp->tlc_info & TX_RES_RATE_TABLE_COLOR_MSK) >> + TX_RES_RATE_TABLE_COLOR_POS; } rcu_read_unlock(); @@ -1707,6 +1712,11 @@ static void iwl_mvm_tx_reclaim(struct iwl_mvm *mvm, int sta_id, int tid, iwl_mvm_check_ratid_empty(mvm, sta, tid); freed = 0; + + /* pack lq color from tid_data along the reduced txp */ + ba_info->status.status_driver_data[0] = + RS_DRV_DATA_PACK(tid_data->lq_color, + ba_info->status.status_driver_data[0]); ba_info->status.status_driver_data[1] = (void *)(uintptr_t)rate; skb_queue_walk(&reclaimed_skbs, skb) { -- cgit v1.2.3 From c72c37b7f392ad7edc10b6092fa48c632ba6f4ed Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Thu, 16 Mar 2017 17:26:03 +0200 Subject: iwlwifi: mvm: Fix command queue number on d0i3 flow During d0i3 flow we flush all the queue except from the command queue. Currently, in this flow the command queue is hard coded to 9. In DQA the command queue number has changed from 9 to 0. Fix that. This fixes a problem in runtime PM resume flow. Fixes: 097129c9e625 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode") Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 4e74a6b90e70..ed20c0c5abc8 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1730,8 +1730,11 @@ int iwl_mvm_find_free_queue(struct iwl_mvm *mvm, u8 sta_id, u8 minq, u8 maxq); */ static inline u32 iwl_mvm_flushable_queues(struct iwl_mvm *mvm) { + u32 cmd_queue = iwl_mvm_is_dqa_supported(mvm) ? IWL_MVM_DQA_CMD_QUEUE : + IWL_MVM_CMD_QUEUE; + return ((BIT(mvm->cfg->base_params->num_of_queues) - 1) & - ~BIT(IWL_MVM_CMD_QUEUE)); + ~BIT(cmd_queue)); } static inline -- cgit v1.2.3 From ee48b72211f844a58a06819e9ccceee6acf04b2d Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Tue, 21 Mar 2017 17:13:16 +0200 Subject: iwlwifi: mvm: support ibss in dqa mode Allow working IBSS also when working in DQA mode. This is done by setting it to treat the queues the same as a BSS AP treats the queues. Fixes: 7948b87308a4 ("iwlwifi: mvm: enable dynamic queue allocation mode") Signed-off-by: Liad Kaufman Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index f5c786ddc526..9184ce09b89a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -2120,7 +2120,8 @@ int iwl_mvm_add_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) if (!iwl_mvm_is_dqa_supported(mvm)) return 0; - if (WARN_ON(vif->type != NL80211_IFTYPE_AP)) + if (WARN_ON(vif->type != NL80211_IFTYPE_AP && + vif->type != NL80211_IFTYPE_ADHOC)) return -ENOTSUPP; /* @@ -2155,6 +2156,16 @@ int iwl_mvm_add_mcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) mvmvif->cab_queue = queue; } else if (!fw_has_api(&mvm->fw->ucode_capa, IWL_UCODE_TLV_API_STA_TYPE)) { + /* + * In IBSS, ieee80211_check_queues() sets the cab_queue to be + * invalid, so make sure we use the queue we want. + * Note that this is done here as we want to avoid making DQA + * changes in mac80211 layer. + */ + if (vif->type == NL80211_IFTYPE_ADHOC) { + vif->cab_queue = IWL_MVM_DQA_GCAST_QUEUE; + mvmvif->cab_queue = vif->cab_queue; + } iwl_mvm_enable_txq(mvm, vif->cab_queue, vif->cab_queue, 0, &cfg, timeout); } -- cgit v1.2.3 From d9954405758a0cbbe258d9b4d4dc12a06fa48a28 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 22 Mar 2017 22:00:10 +0100 Subject: iwlwifi: tt: move ucode_loaded check under mutex The ucode_loaded check should be under the mutex, since it can otherwise change state after we looked at it and before we got the mutex. Fix that. Fixes: 5c89e7bc557e ("iwlwifi: mvm: add registration to cooling device") Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/tt.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c index f9cbd197246f..506d58104e1c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tt.c @@ -790,11 +790,13 @@ static int iwl_mvm_tcool_set_cur_state(struct thermal_cooling_device *cdev, struct iwl_mvm *mvm = (struct iwl_mvm *)(cdev->devdata); int ret; - if (!mvm->ucode_loaded || !(mvm->cur_ucode == IWL_UCODE_REGULAR)) - return -EIO; - mutex_lock(&mvm->mutex); + if (!mvm->ucode_loaded || !(mvm->cur_ucode == IWL_UCODE_REGULAR)) { + ret = -EIO; + goto unlock; + } + if (new_state >= ARRAY_SIZE(iwl_mvm_cdev_budgets)) { ret = -EINVAL; goto unlock; -- cgit v1.2.3 From addce854f164a68da9cb158e2e7e447705068549 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 29 Mar 2017 10:21:09 +0300 Subject: iwlwifi: mvm: fix firmware debug restart recording When we want to stop the recording of the firmware debug and restart it later without reloading the firmware we don't need to resend the configuration that comes with host commands. Sending those commands confused the hardware and led to an NMI 0x66. Change the flow as following: * read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL) * clear those registers * wait for the hardware to complete its write to the buffer * get the data * restore the value of those registers (to restart the recording) For early start (where the configuration is already compiled in the firmware), we don't need to set those registers after the firmware has been loaded, but only when we want to restart the recording without having restarted the firmware. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-prph.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c | 12 +--------- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 32 ++++++++++++++++++------- 4 files changed, 27 insertions(+), 19 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h index 306bc967742e..77efbb78e867 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h @@ -370,6 +370,7 @@ #define MON_DMARB_RD_DATA_ADDR (0xa03c5c) #define DBGC_IN_SAMPLE (0xa03c00) +#define DBGC_OUT_CTRL (0xa03c0c) /* enable the ID buf for read */ #define WFPM_PS_CTL_CLR 0xA0300C diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c index 7b86a4f1b574..c8712e6eea74 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/fw-dbg.c @@ -1002,14 +1002,6 @@ int iwl_mvm_fw_dbg_collect_trig(struct iwl_mvm *mvm, return 0; } -static inline void iwl_mvm_restart_early_start(struct iwl_mvm *mvm) -{ - if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) - iwl_clear_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); - else - iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 1); -} - int iwl_mvm_start_fw_dbg_conf(struct iwl_mvm *mvm, u8 conf_id) { u8 *ptr; @@ -1023,10 +1015,8 @@ int iwl_mvm_start_fw_dbg_conf(struct iwl_mvm *mvm, u8 conf_id) /* EARLY START - firmware's configuration is hard coded */ if ((!mvm->fw->dbg_conf_tlv[conf_id] || !mvm->fw->dbg_conf_tlv[conf_id]->num_of_hcmds) && - conf_id == FW_DBG_START_FROM_ALIVE) { - iwl_mvm_restart_early_start(mvm); + conf_id == FW_DBG_START_FROM_ALIVE) return 0; - } if (!mvm->fw->dbg_conf_tlv[conf_id]) return -EINVAL; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index ed20c0c5abc8..52f8d7a6a7dc 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1756,6 +1756,7 @@ static inline void iwl_mvm_stop_device(struct iwl_mvm *mvm) if (!iwl_mvm_has_new_tx_api(mvm)) iwl_free_fw_paging(mvm); mvm->ucode_loaded = false; + mvm->fw_dbg_conf = FW_DBG_INVALID; iwl_trans_stop_device(mvm->trans); } diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 9ffff6ed8133..3da5ec40aaea 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -1149,21 +1149,37 @@ static void iwl_mvm_fw_error_dump_wk(struct work_struct *work) mutex_lock(&mvm->mutex); - /* stop recording */ if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + /* stop recording */ iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); + + iwl_mvm_fw_error_dump(mvm); + + /* start recording again if the firmware is not crashed */ + if (!test_bit(STATUS_FW_ERROR, &mvm->trans->status) && + mvm->fw->dbg_dest_tlv) + iwl_clear_bits_prph(mvm->trans, + MON_BUFF_SAMPLE_CTL, 0x100); } else { + u32 in_sample = iwl_read_prph(mvm->trans, DBGC_IN_SAMPLE); + u32 out_ctrl = iwl_read_prph(mvm->trans, DBGC_OUT_CTRL); + + /* stop recording */ iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 0); - /* wait before we collect the data till the DBGC stop */ udelay(100); - } + iwl_write_prph(mvm->trans, DBGC_OUT_CTRL, 0); + /* wait before we collect the data till the DBGC stop */ + udelay(500); - iwl_mvm_fw_error_dump(mvm); + iwl_mvm_fw_error_dump(mvm); - /* start recording again if the firmware is not crashed */ - WARN_ON_ONCE((!test_bit(STATUS_FW_ERROR, &mvm->trans->status)) && - mvm->fw->dbg_dest_tlv && - iwl_mvm_start_fw_dbg_conf(mvm, mvm->fw_dbg_conf)); + /* start recording again if the firmware is not crashed */ + if (!test_bit(STATUS_FW_ERROR, &mvm->trans->status) && + mvm->fw->dbg_dest_tlv) { + iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, in_sample); + iwl_write_prph(mvm->trans, DBGC_OUT_CTRL, out_ctrl); + } + } mutex_unlock(&mvm->mutex); -- cgit v1.2.3 From e4c49c4937951de1cdbe35572ade40c948dec1e1 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Fri, 24 Mar 2017 11:01:45 +0200 Subject: iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3 We only need to handle d0i3 entry and exit during suspend resume if system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry failures will cause suspend to fail. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791 Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index 70acf850a9f1..93cbc7a69bcd 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -2803,7 +2803,8 @@ static struct iwl_trans_dump_data #ifdef CONFIG_PM_SLEEP static int iwl_trans_pcie_suspend(struct iwl_trans *trans) { - if (trans->runtime_pm_mode == IWL_PLAT_PM_MODE_D0I3) + if (trans->runtime_pm_mode == IWL_PLAT_PM_MODE_D0I3 && + (trans->system_pm_mode == IWL_PLAT_PM_MODE_D0I3)) return iwl_pci_fw_enter_d0i3(trans); return 0; @@ -2811,7 +2812,8 @@ static int iwl_trans_pcie_suspend(struct iwl_trans *trans) static void iwl_trans_pcie_resume(struct iwl_trans *trans) { - if (trans->runtime_pm_mode == IWL_PLAT_PM_MODE_D0I3) + if (trans->runtime_pm_mode == IWL_PLAT_PM_MODE_D0I3 && + (trans->system_pm_mode == IWL_PLAT_PM_MODE_D0I3)) iwl_pci_fw_exit_d0i3(trans); } #endif /* CONFIG_PM_SLEEP */ -- cgit v1.2.3 From 71793b7d3eb0897ca0dc4a109ede608d3e2c70ed Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Thu, 30 Mar 2017 12:04:47 +0300 Subject: iwlwifi: mvm: don't fail when removing a key from an inexisting sta The iwl_mvm_remove_sta_key() function handles removing a key when the sta doesn't exist anymore. Mistakenly, this was changed to return an error while fixing another bug. If the mvm_sta doesn't exist, we continue normally, but just don't try to remove the igtk key. Fixes: cd4d23c1ea9b ("iwlwifi: mvm: Fix removal of IGTK") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index 9184ce09b89a..614d67810d05 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -3332,18 +3332,15 @@ int iwl_mvm_remove_sta_key(struct iwl_mvm *mvm, /* Get the station from the mvm local station table */ mvm_sta = iwl_mvm_get_key_sta(mvm, vif, sta); - if (!mvm_sta) { - IWL_ERR(mvm, "Failed to find station\n"); - return -EINVAL; - } - sta_id = mvm_sta->sta_id; + if (mvm_sta) + sta_id = mvm_sta->sta_id; IWL_DEBUG_WEP(mvm, "mvm remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id); - if (keyconf->cipher == WLAN_CIPHER_SUITE_AES_CMAC || - keyconf->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_128 || - keyconf->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_256) + if (mvm_sta && (keyconf->cipher == WLAN_CIPHER_SUITE_AES_CMAC || + keyconf->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_128 || + keyconf->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_256)) return iwl_mvm_send_sta_igtk(mvm, keyconf, sta_id, true); if (!__test_and_clear_bit(keyconf->hw_key_idx, mvm->fw_key_table)) { -- cgit v1.2.3 From 40cbeca3c09965f3084d591476559cbb3df150ec Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 31 Mar 2017 10:47:35 +0200 Subject: iwlwifi: mvm: clear new beacon command template struct Clear the struct so that all reserved fields are zero when we send the struct down to the device. Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c index 0f1831b41915..fd2fc46e2fe5 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c @@ -1040,7 +1040,7 @@ static int iwl_mvm_mac_ctxt_send_beacon(struct iwl_mvm *mvm, struct iwl_mac_beacon_cmd_v6 beacon_cmd_v6; struct iwl_mac_beacon_cmd_v7 beacon_cmd; } u = {}; - struct iwl_mac_beacon_cmd beacon_cmd; + struct iwl_mac_beacon_cmd beacon_cmd = {}; struct ieee80211_tx_info *info; u32 beacon_skb_len; u32 rate, tx_flags; -- cgit v1.2.3 From 15098803d38778070b8edfa5a3d5fc4fef10d0a1 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Tue, 25 Apr 2017 10:18:10 +0300 Subject: iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265 In a previous commit, we removed support for API versions earlier than 22 for these NICs. By mistake, the *_UCODE_API_MIN definitions were set to 17. Fix that. Fixes: 4b87e5af638b ("iwlwifi: remove support for fw older than -17 and -22") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-7000.c | 4 ++-- drivers/net/wireless/intel/iwlwifi/iwl-8000.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-7000.c b/drivers/net/wireless/intel/iwlwifi/iwl-7000.c index 3b3e076571d6..45e2efc70d19 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-7000.c @@ -79,8 +79,8 @@ /* Lowest firmware API version supported */ #define IWL7260_UCODE_API_MIN 17 #define IWL7265_UCODE_API_MIN 17 -#define IWL7265D_UCODE_API_MIN 17 -#define IWL3168_UCODE_API_MIN 20 +#define IWL7265D_UCODE_API_MIN 22 +#define IWL3168_UCODE_API_MIN 22 /* NVM versions */ #define IWL7260_NVM_VERSION 0x0a1d diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c index b9718c0cf174..89137717c1fc 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-8000.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-8000.c @@ -74,8 +74,8 @@ #define IWL8265_UCODE_API_MAX 30 /* Lowest firmware API version supported */ -#define IWL8000_UCODE_API_MIN 17 -#define IWL8265_UCODE_API_MIN 20 +#define IWL8000_UCODE_API_MIN 22 +#define IWL8265_UCODE_API_MIN 22 /* NVM versions */ #define IWL8000_NVM_VERSION 0x0a1d -- cgit v1.2.3 From dc1cd1d5ac22dbcd158c3de62b76ebb80e55d46b Mon Sep 17 00:00:00 2001 From: Shahar S Matityahu Date: Thu, 6 Apr 2017 13:35:38 +0300 Subject: iwlwifi: fix host command memory leaks Sending host command with CMD_WANT_SKB flag demands the release of the response buffer with iwl_free_resp function. The patch adds the memory release in all the relevant places Signed-off-by: Shahar S Matityahu Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c index 9fb46a6f47cf..9c9bfbbabdf1 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx-gen2.c @@ -906,7 +906,7 @@ int iwl_trans_pcie_dyn_txq_alloc(struct iwl_trans *trans, if (WARN_ON(iwl_rx_packet_payload_len(hcmd.resp_pkt) != sizeof(*rsp))) { ret = -EINVAL; - goto error; + goto error_free_resp; } rsp = (void *)hcmd.resp_pkt->data; @@ -915,13 +915,13 @@ int iwl_trans_pcie_dyn_txq_alloc(struct iwl_trans *trans, if (qid > ARRAY_SIZE(trans_pcie->txq)) { WARN_ONCE(1, "queue index %d unsupported", qid); ret = -EIO; - goto error; + goto error_free_resp; } if (test_and_set_bit(qid, trans_pcie->queue_used)) { WARN_ONCE(1, "queue %d already used", qid); ret = -EIO; - goto error; + goto error_free_resp; } txq->id = qid; @@ -934,8 +934,11 @@ int iwl_trans_pcie_dyn_txq_alloc(struct iwl_trans *trans, (txq->write_ptr) | (qid << 16)); IWL_DEBUG_TX_QUEUES(trans, "Activate queue %d\n", qid); + iwl_free_resp(&hcmd); return qid; +error_free_resp: + iwl_free_resp(&hcmd); error: iwl_pcie_gen2_txq_free_memory(trans, txq); return ret; -- cgit v1.2.3