From 9e13fbf7af3cb044f365e8df9c0e9277715cfc7c Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 15 Jul 2011 03:18:21 -0700 Subject: seeq: Move the SEEQ drivers Move the drivers that use SEEQ chipset into drivers/net/ethernet/seeq and make the necessary Kconfig and Makefile changes. CC: Russell King CC: Hamish Coleman Signed-off-by: Jeff Kirsher --- MAINTAINERS | 3 +- drivers/net/Kconfig | 18 - drivers/net/Makefile | 2 - drivers/net/arm/Kconfig | 7 - drivers/net/arm/Makefile | 1 - drivers/net/arm/ether3.c | 918 ----------------------------------- drivers/net/arm/ether3.h | 176 ------- drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/seeq/Kconfig | 45 ++ drivers/net/ethernet/seeq/Makefile | 7 + drivers/net/ethernet/seeq/ether3.c | 918 +++++++++++++++++++++++++++++++++++ drivers/net/ethernet/seeq/ether3.h | 176 +++++++ drivers/net/ethernet/seeq/seeq8005.c | 752 ++++++++++++++++++++++++++++ drivers/net/ethernet/seeq/seeq8005.h | 156 ++++++ drivers/net/ethernet/seeq/sgiseeq.c | 858 ++++++++++++++++++++++++++++++++ drivers/net/ethernet/seeq/sgiseeq.h | 103 ++++ drivers/net/seeq8005.c | 752 ---------------------------- drivers/net/seeq8005.h | 156 ------ drivers/net/sgiseeq.c | 858 -------------------------------- drivers/net/sgiseeq.h | 103 ---- 21 files changed, 3019 insertions(+), 2992 deletions(-) delete mode 100644 drivers/net/arm/ether3.c delete mode 100644 drivers/net/arm/ether3.h create mode 100644 drivers/net/ethernet/seeq/Kconfig create mode 100644 drivers/net/ethernet/seeq/Makefile create mode 100644 drivers/net/ethernet/seeq/ether3.c create mode 100644 drivers/net/ethernet/seeq/ether3.h create mode 100644 drivers/net/ethernet/seeq/seeq8005.c create mode 100644 drivers/net/ethernet/seeq/seeq8005.h create mode 100644 drivers/net/ethernet/seeq/sgiseeq.c create mode 100644 drivers/net/ethernet/seeq/sgiseeq.h delete mode 100644 drivers/net/seeq8005.c delete mode 100644 drivers/net/seeq8005.h delete mode 100644 drivers/net/sgiseeq.c delete mode 100644 drivers/net/sgiseeq.h diff --git a/MAINTAINERS b/MAINTAINERS index 1bd9fbd2175d..e986e3e1d2af 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1014,7 +1014,8 @@ F: arch/arm/include/asm/hardware/ioc.h F: arch/arm/include/asm/hardware/iomd.h F: arch/arm/include/asm/hardware/memc.h F: arch/arm/mach-rpc/ -F: drivers/net/arm/ether3* +F: drivers/net/ethernet/i825xx/ether1* +F: drivers/net/ethernet/seeq/ether3* F: drivers/scsi/arm/ ARM/SHARK MACHINE SUPPORT diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index aec74ad67cc0..696464cb0a93 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -489,17 +489,6 @@ config ETH16I To compile this driver as a module, choose M here. The module will be called eth16i. -config SEEQ8005 - tristate "SEEQ8005 support (EXPERIMENTAL)" - depends on NET_ISA && EXPERIMENTAL - help - This is a driver for the SEEQ 8005 network (Ethernet) card. If this - is for you, read the Ethernet-HOWTO, available from - . - - To compile this driver as a module, choose M here. The module - will be called seeq8005. - config NET_PCI bool "EISA, VLB, PCI and on board controllers" depends on ISA || EISA || PCI @@ -690,13 +679,6 @@ config NET_POCKET the questions about this class of network devices. If you say Y, you will be asked for your specific device in the following questions. -config SGISEEQ - tristate "SGI Seeq ethernet controller support" - depends on SGI_HAS_SEEQ - help - Say Y here if you have an Seeq based Ethernet network card. This is - used in many Silicon Graphics machines. - config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" depends on M523x || M527x || M5272 || M528x || M520x || M532x || \ diff --git a/drivers/net/Makefile b/drivers/net/Makefile index c98e1ad17c99..b1ead87b65c3 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -65,7 +65,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o obj-$(CONFIG_HAMACHI) += hamachi.o obj-$(CONFIG_NET) += Space.o loopback.o -obj-$(CONFIG_SEEQ8005) += seeq8005.o obj-$(CONFIG_NET_SB1000) += sb1000.o obj-$(CONFIG_HP100) += hp100.o obj-$(CONFIG_FEC) += fec.o @@ -102,7 +101,6 @@ obj-$(CONFIG_IFB) += ifb.o obj-$(CONFIG_MACVLAN) += macvlan.o obj-$(CONFIG_MACVTAP) += macvtap.o obj-$(CONFIG_DEFXX) += defxx.o -obj-$(CONFIG_SGISEEQ) += sgiseeq.o obj-$(CONFIG_AT1700) += at1700.o obj-$(CONFIG_CPMAC) += cpmac.o diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig index 4320e88b2ac2..b6f7302ccc64 100644 --- a/drivers/net/arm/Kconfig +++ b/drivers/net/arm/Kconfig @@ -3,13 +3,6 @@ # These are for Acorn's Expansion card network interfaces # -config ARM_ETHER3 - tristate "Acorn/ANT Ether3 support" - depends on ARM && ARCH_ACORN - help - If you have an Acorn system with one of these network cards, you - should say Y to this option if you wish to use it with Linux. - config ARM_AT91_ETHER tristate "AT91RM9200 Ethernet support" depends on ARM && ARCH_AT91RM9200 diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile index 5a0f14196cb9..a2532e6d7df5 100644 --- a/drivers/net/arm/Makefile +++ b/drivers/net/arm/Makefile @@ -3,7 +3,6 @@ # Makefile for the ARM network device drivers # -obj-$(CONFIG_ARM_ETHER3) += ether3.o obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o diff --git a/drivers/net/arm/ether3.c b/drivers/net/arm/ether3.c deleted file mode 100644 index 44a8746f4014..000000000000 --- a/drivers/net/arm/ether3.c +++ /dev/null @@ -1,918 +0,0 @@ -/* - * linux/drivers/acorn/net/ether3.c - * - * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * SEEQ nq8005 ethernet driver for Acorn/ANT Ether3 card - * for Acorn machines - * - * By Russell King, with some suggestions from borris@ant.co.uk - * - * Changelog: - * 1.04 RMK 29/02/1996 Won't pass packets that are from our ethernet - * address up to the higher levels - they're - * silently ignored. I/F can now be put into - * multicast mode. Receiver routine optimised. - * 1.05 RMK 30/02/1996 Now claims interrupt at open when part of - * the kernel rather than when a module. - * 1.06 RMK 02/03/1996 Various code cleanups - * 1.07 RMK 13/10/1996 Optimised interrupt routine and transmit - * routines. - * 1.08 RMK 14/10/1996 Fixed problem with too many packets, - * prevented the kernel message about dropped - * packets appearing too many times a second. - * Now does not disable all IRQs, only the IRQ - * used by this card. - * 1.09 RMK 10/11/1996 Only enables TX irq when buffer space is low, - * but we still service the TX queue if we get a - * RX interrupt. - * 1.10 RMK 15/07/1997 Fixed autoprobing of NQ8004. - * 1.11 RMK 16/11/1997 Fixed autoprobing of NQ8005A. - * 1.12 RMK 31/12/1997 Removed reference to dev_tint for Linux 2.1. - * RMK 27/06/1998 Changed asm/delay.h to linux/delay.h. - * 1.13 RMK 29/06/1998 Fixed problem with transmission of packets. - * Chip seems to have a bug in, whereby if the - * packet starts two bytes from the end of the - * buffer, it corrupts the receiver chain, and - * never updates the transmit status correctly. - * 1.14 RMK 07/01/1998 Added initial code for ETHERB addressing. - * 1.15 RMK 30/04/1999 More fixes to the transmit routine for buggy - * hardware. - * 1.16 RMK 10/02/2000 Updated for 2.3.43 - * 1.17 RMK 13/05/2000 Updated for 2.3.99-pre8 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -static char version[] __devinitdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n"; - -#include "ether3.h" - -static unsigned int net_debug = NET_DEBUG; - -static void ether3_setmulticastlist(struct net_device *dev); -static int ether3_rx(struct net_device *dev, unsigned int maxcnt); -static void ether3_tx(struct net_device *dev); -static int ether3_open (struct net_device *dev); -static int ether3_sendpacket (struct sk_buff *skb, struct net_device *dev); -static irqreturn_t ether3_interrupt (int irq, void *dev_id); -static int ether3_close (struct net_device *dev); -static void ether3_setmulticastlist (struct net_device *dev); -static void ether3_timeout(struct net_device *dev); - -#define BUS_16 2 -#define BUS_8 1 -#define BUS_UNKNOWN 0 - -/* --------------------------------------------------------------------------- */ - -typedef enum { - buffer_write, - buffer_read -} buffer_rw_t; - -/* - * ether3 read/write. Slow things down a bit... - * The SEEQ8005 doesn't like us writing to its registers - * too quickly. - */ -static inline void ether3_outb(int v, const void __iomem *r) -{ - writeb(v, r); - udelay(1); -} - -static inline void ether3_outw(int v, const void __iomem *r) -{ - writew(v, r); - udelay(1); -} -#define ether3_inb(r) ({ unsigned int __v = readb((r)); udelay(1); __v; }) -#define ether3_inw(r) ({ unsigned int __v = readw((r)); udelay(1); __v; }) - -static int -ether3_setbuffer(struct net_device *dev, buffer_rw_t read, int start) -{ - int timeout = 1000; - - ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); - ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND); - - while ((ether3_inw(REG_STATUS) & STAT_FIFOEMPTY) == 0) { - if (!timeout--) { - printk("%s: setbuffer broken\n", dev->name); - priv(dev)->broken = 1; - return 1; - } - udelay(1); - } - - if (read == buffer_read) { - ether3_outw(start, REG_DMAADDR); - ether3_outw(priv(dev)->regs.command | CMD_FIFOREAD, REG_COMMAND); - } else { - ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND); - ether3_outw(start, REG_DMAADDR); - } - return 0; -} - -/* - * write data to the buffer memory - */ -#define ether3_writebuffer(dev,data,length) \ - writesw(REG_BUFWIN, (data), (length) >> 1) - -#define ether3_writeword(dev,data) \ - writew((data), REG_BUFWIN) - -#define ether3_writelong(dev,data) { \ - void __iomem *reg_bufwin = REG_BUFWIN; \ - writew((data), reg_bufwin); \ - writew((data) >> 16, reg_bufwin); \ -} - -/* - * read data from the buffer memory - */ -#define ether3_readbuffer(dev,data,length) \ - readsw(REG_BUFWIN, (data), (length) >> 1) - -#define ether3_readword(dev) \ - readw(REG_BUFWIN) - -#define ether3_readlong(dev) \ - readw(REG_BUFWIN) | (readw(REG_BUFWIN) << 16) - -/* - * Switch LED off... - */ -static void ether3_ledoff(unsigned long data) -{ - struct net_device *dev = (struct net_device *)data; - ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); -} - -/* - * switch LED on... - */ -static inline void ether3_ledon(struct net_device *dev) -{ - del_timer(&priv(dev)->timer); - priv(dev)->timer.expires = jiffies + HZ / 50; /* leave on for 1/50th second */ - priv(dev)->timer.data = (unsigned long)dev; - priv(dev)->timer.function = ether3_ledoff; - add_timer(&priv(dev)->timer); - if (priv(dev)->regs.config2 & CFG2_CTRLO) - ether3_outw(priv(dev)->regs.config2 &= ~CFG2_CTRLO, REG_CONFIG2); -} - -/* - * Read the ethernet address string from the on board rom. - * This is an ascii string!!! - */ -static int __devinit -ether3_addr(char *addr, struct expansion_card *ec) -{ - struct in_chunk_dir cd; - char *s; - - if (ecard_readchunk(&cd, ec, 0xf5, 0) && (s = strchr(cd.d.string, '('))) { - int i; - for (i = 0; i<6; i++) { - addr[i] = simple_strtoul(s + 1, &s, 0x10); - if (*s != (i==5?')' : ':' )) - break; - } - if (i == 6) - return 0; - } - /* I wonder if we should even let the user continue in this case - * - no, it would be better to disable the device - */ - printk(KERN_ERR "ether3: Couldn't read a valid MAC address from card.\n"); - return -ENODEV; -} - -/* --------------------------------------------------------------------------- */ - -static int __devinit -ether3_ramtest(struct net_device *dev, unsigned char byte) -{ - unsigned char *buffer = kmalloc(RX_END, GFP_KERNEL); - int i,ret = 0; - int max_errors = 4; - int bad = -1; - - if (!buffer) - return 1; - - memset(buffer, byte, RX_END); - ether3_setbuffer(dev, buffer_write, 0); - ether3_writebuffer(dev, buffer, TX_END); - ether3_setbuffer(dev, buffer_write, RX_START); - ether3_writebuffer(dev, buffer + RX_START, RX_LEN); - memset(buffer, byte ^ 0xff, RX_END); - ether3_setbuffer(dev, buffer_read, 0); - ether3_readbuffer(dev, buffer, TX_END); - ether3_setbuffer(dev, buffer_read, RX_START); - ether3_readbuffer(dev, buffer + RX_START, RX_LEN); - - for (i = 0; i < RX_END; i++) { - if (buffer[i] != byte) { - if (max_errors > 0 && bad != buffer[i]) { - printk("%s: RAM failed with (%02X instead of %02X) at 0x%04X", - dev->name, buffer[i], byte, i); - ret = 2; - max_errors--; - bad = i; - } - } else { - if (bad != -1) { - if (bad != i - 1) - printk(" - 0x%04X\n", i - 1); - printk("\n"); - bad = -1; - } - } - } - if (bad != -1) - printk(" - 0xffff\n"); - kfree(buffer); - - return ret; -} - -/* ------------------------------------------------------------------------------- */ - -static int __devinit ether3_init_2(struct net_device *dev) -{ - int i; - - priv(dev)->regs.config1 = CFG1_RECVCOMPSTAT0|CFG1_DMABURST8; - priv(dev)->regs.config2 = CFG2_CTRLO|CFG2_RECVCRC|CFG2_ERRENCRC; - priv(dev)->regs.command = 0; - - /* - * Set up our hardware address - */ - ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1); - for (i = 0; i < 6; i++) - ether3_outb(dev->dev_addr[i], REG_BUFWIN); - - if (dev->flags & IFF_PROMISC) - priv(dev)->regs.config1 |= CFG1_RECVPROMISC; - else if (dev->flags & IFF_MULTICAST) - priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI; - else - priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD; - - /* - * There is a problem with the NQ8005 in that it occasionally loses the - * last two bytes. To get round this problem, we receive the CRC as - * well. That way, if we do lose the last two, then it doesn't matter. - */ - ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1); - ether3_outw((TX_END>>8) - 1, REG_BUFWIN); - ether3_outw(priv(dev)->rx_head, REG_RECVPTR); - ether3_outw(0, REG_TRANSMITPTR); - ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND); - ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); - ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); - ether3_outw(priv(dev)->regs.command, REG_COMMAND); - - i = ether3_ramtest(dev, 0x5A); - if(i) - return i; - i = ether3_ramtest(dev, 0x1E); - if(i) - return i; - - ether3_setbuffer(dev, buffer_write, 0); - ether3_writelong(dev, 0); - return 0; -} - -static void -ether3_init_for_open(struct net_device *dev) -{ - int i; - - /* Reset the chip */ - ether3_outw(CFG2_RESET, REG_CONFIG2); - udelay(4); - - priv(dev)->regs.command = 0; - ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND); - while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON)) - barrier(); - - ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1); - for (i = 0; i < 6; i++) - ether3_outb(dev->dev_addr[i], REG_BUFWIN); - - priv(dev)->tx_head = 0; - priv(dev)->tx_tail = 0; - priv(dev)->regs.config2 |= CFG2_CTRLO; - priv(dev)->rx_head = RX_START; - - ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1); - ether3_outw((TX_END>>8) - 1, REG_BUFWIN); - ether3_outw(priv(dev)->rx_head, REG_RECVPTR); - ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND); - ether3_outw(0, REG_TRANSMITPTR); - ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); - ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); - - ether3_setbuffer(dev, buffer_write, 0); - ether3_writelong(dev, 0); - - priv(dev)->regs.command = CMD_ENINTRX | CMD_ENINTTX; - ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND); -} - -static inline int -ether3_probe_bus_8(struct net_device *dev, int val) -{ - int write_low, write_high, read_low, read_high; - - write_low = val & 255; - write_high = val >> 8; - - printk(KERN_DEBUG "ether3_probe: write8 [%02X:%02X]", write_high, write_low); - - ether3_outb(write_low, REG_RECVPTR); - ether3_outb(write_high, REG_RECVPTR + 4); - - read_low = ether3_inb(REG_RECVPTR); - read_high = ether3_inb(REG_RECVPTR + 4); - - printk(", read8 [%02X:%02X]\n", read_high, read_low); - - return read_low == write_low && read_high == write_high; -} - -static inline int -ether3_probe_bus_16(struct net_device *dev, int val) -{ - int read_val; - - ether3_outw(val, REG_RECVPTR); - read_val = ether3_inw(REG_RECVPTR); - - printk(KERN_DEBUG "ether3_probe: write16 [%04X], read16 [%04X]\n", val, read_val); - - return read_val == val; -} - -/* - * Open/initialize the board. This is called (in the current kernel) - * sometime after booting when the 'ifconfig' program is run. - * - * This routine should set everything up anew at each open, even - * registers that "should" only need to be set once at boot, so that - * there is non-reboot way to recover if something goes wrong. - */ -static int -ether3_open(struct net_device *dev) -{ - if (!is_valid_ether_addr(dev->dev_addr)) { - printk(KERN_WARNING "%s: invalid ethernet MAC address\n", - dev->name); - return -EINVAL; - } - - if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev)) - return -EAGAIN; - - ether3_init_for_open(dev); - - netif_start_queue(dev); - - return 0; -} - -/* - * The inverse routine to ether3_open(). - */ -static int -ether3_close(struct net_device *dev) -{ - netif_stop_queue(dev); - - disable_irq(dev->irq); - - ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND); - priv(dev)->regs.command = 0; - while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON)) - barrier(); - ether3_outb(0x80, REG_CONFIG2 + 4); - ether3_outw(0, REG_COMMAND); - - free_irq(dev->irq, dev); - - return 0; -} - -/* - * Set or clear promiscuous/multicast mode filter for this adaptor. - * - * We don't attempt any packet filtering. The card may have a SEEQ 8004 - * in which does not have the other ethernet address registers present... - */ -static void ether3_setmulticastlist(struct net_device *dev) -{ - priv(dev)->regs.config1 &= ~CFG1_RECVPROMISC; - - if (dev->flags & IFF_PROMISC) { - /* promiscuous mode */ - priv(dev)->regs.config1 |= CFG1_RECVPROMISC; - } else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) { - priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI; - } else - priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD; - - ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); -} - -static void ether3_timeout(struct net_device *dev) -{ - unsigned long flags; - - del_timer(&priv(dev)->timer); - - local_irq_save(flags); - printk(KERN_ERR "%s: transmit timed out, network cable problem?\n", dev->name); - printk(KERN_ERR "%s: state: { status=%04X cfg1=%04X cfg2=%04X }\n", dev->name, - ether3_inw(REG_STATUS), ether3_inw(REG_CONFIG1), ether3_inw(REG_CONFIG2)); - printk(KERN_ERR "%s: { rpr=%04X rea=%04X tpr=%04X }\n", dev->name, - ether3_inw(REG_RECVPTR), ether3_inw(REG_RECVEND), ether3_inw(REG_TRANSMITPTR)); - printk(KERN_ERR "%s: tx head=%X tx tail=%X\n", dev->name, - priv(dev)->tx_head, priv(dev)->tx_tail); - ether3_setbuffer(dev, buffer_read, priv(dev)->tx_tail); - printk(KERN_ERR "%s: packet status = %08X\n", dev->name, ether3_readlong(dev)); - local_irq_restore(flags); - - priv(dev)->regs.config2 |= CFG2_CTRLO; - dev->stats.tx_errors += 1; - ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); - priv(dev)->tx_head = priv(dev)->tx_tail = 0; - - netif_wake_queue(dev); -} - -/* - * Transmit a packet - */ -static int -ether3_sendpacket(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - unsigned int ptr, next_ptr; - - if (priv(dev)->broken) { - dev_kfree_skb(skb); - dev->stats.tx_dropped++; - netif_start_queue(dev); - return NETDEV_TX_OK; - } - - length = (length + 1) & ~1; - if (length != skb->len) { - if (skb_padto(skb, length)) - goto out; - } - - next_ptr = (priv(dev)->tx_head + 1) & 15; - - local_irq_save(flags); - - if (priv(dev)->tx_tail == next_ptr) { - local_irq_restore(flags); - return NETDEV_TX_BUSY; /* unable to queue */ - } - - ptr = 0x600 * priv(dev)->tx_head; - priv(dev)->tx_head = next_ptr; - next_ptr *= 0x600; - -#define TXHDR_FLAGS (TXHDR_TRANSMIT|TXHDR_CHAINCONTINUE|TXHDR_DATAFOLLOWS|TXHDR_ENSUCCESS) - - ether3_setbuffer(dev, buffer_write, next_ptr); - ether3_writelong(dev, 0); - ether3_setbuffer(dev, buffer_write, ptr); - ether3_writelong(dev, 0); - ether3_writebuffer(dev, skb->data, length); - ether3_writeword(dev, htons(next_ptr)); - ether3_writeword(dev, TXHDR_CHAINCONTINUE >> 16); - ether3_setbuffer(dev, buffer_write, ptr); - ether3_writeword(dev, htons((ptr + length + 4))); - ether3_writeword(dev, TXHDR_FLAGS >> 16); - ether3_ledon(dev); - - if (!(ether3_inw(REG_STATUS) & STAT_TXON)) { - ether3_outw(ptr, REG_TRANSMITPTR); - ether3_outw(priv(dev)->regs.command | CMD_TXON, REG_COMMAND); - } - - next_ptr = (priv(dev)->tx_head + 1) & 15; - local_irq_restore(flags); - - dev_kfree_skb(skb); - - if (priv(dev)->tx_tail == next_ptr) - netif_stop_queue(dev); - - out: - return NETDEV_TX_OK; -} - -static irqreturn_t -ether3_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - unsigned int status, handled = IRQ_NONE; - -#if NET_DEBUG > 1 - if(net_debug & DEBUG_INT) - printk("eth3irq: %d ", irq); -#endif - - status = ether3_inw(REG_STATUS); - - if (status & STAT_INTRX) { - ether3_outw(CMD_ACKINTRX | priv(dev)->regs.command, REG_COMMAND); - ether3_rx(dev, 12); - handled = IRQ_HANDLED; - } - - if (status & STAT_INTTX) { - ether3_outw(CMD_ACKINTTX | priv(dev)->regs.command, REG_COMMAND); - ether3_tx(dev); - handled = IRQ_HANDLED; - } - -#if NET_DEBUG > 1 - if(net_debug & DEBUG_INT) - printk("done\n"); -#endif - return handled; -} - -/* - * If we have a good packet(s), get it/them out of the buffers. - */ -static int ether3_rx(struct net_device *dev, unsigned int maxcnt) -{ - unsigned int next_ptr = priv(dev)->rx_head, received = 0; - - ether3_ledon(dev); - - do { - unsigned int this_ptr, status; - unsigned char addrs[16]; - - /* - * read the first 16 bytes from the buffer. - * This contains the status bytes etc and ethernet addresses, - * and we also check the source ethernet address to see if - * it originated from us. - */ - { - unsigned int temp_ptr; - ether3_setbuffer(dev, buffer_read, next_ptr); - temp_ptr = ether3_readword(dev); - status = ether3_readword(dev); - if ((status & (RXSTAT_DONE | RXHDR_CHAINCONTINUE | RXHDR_RECEIVE)) != - (RXSTAT_DONE | RXHDR_CHAINCONTINUE) || !temp_ptr) - break; - - this_ptr = next_ptr + 4; - next_ptr = ntohs(temp_ptr); - } - ether3_setbuffer(dev, buffer_read, this_ptr); - ether3_readbuffer(dev, addrs+2, 12); - -if (next_ptr < RX_START || next_ptr >= RX_END) { - int i; - printk("%s: bad next pointer @%04X: ", dev->name, priv(dev)->rx_head); - printk("%02X %02X %02X %02X ", next_ptr >> 8, next_ptr & 255, status & 255, status >> 8); - for (i = 2; i < 14; i++) - printk("%02X ", addrs[i]); - printk("\n"); - next_ptr = priv(dev)->rx_head; - break; -} - /* - * ignore our own packets... - */ - if (!(*(unsigned long *)&dev->dev_addr[0] ^ *(unsigned long *)&addrs[2+6]) && - !(*(unsigned short *)&dev->dev_addr[4] ^ *(unsigned short *)&addrs[2+10])) { - maxcnt ++; /* compensate for loopedback packet */ - ether3_outw(next_ptr >> 8, REG_RECVEND); - } else - if (!(status & (RXSTAT_OVERSIZE|RXSTAT_CRCERROR|RXSTAT_DRIBBLEERROR|RXSTAT_SHORTPACKET))) { - unsigned int length = next_ptr - this_ptr; - struct sk_buff *skb; - - if (next_ptr <= this_ptr) - length += RX_END - RX_START; - - skb = dev_alloc_skb(length + 2); - if (skb) { - unsigned char *buf; - - skb_reserve(skb, 2); - buf = skb_put(skb, length); - ether3_readbuffer(dev, buf + 12, length - 12); - ether3_outw(next_ptr >> 8, REG_RECVEND); - *(unsigned short *)(buf + 0) = *(unsigned short *)(addrs + 2); - *(unsigned long *)(buf + 2) = *(unsigned long *)(addrs + 4); - *(unsigned long *)(buf + 6) = *(unsigned long *)(addrs + 8); - *(unsigned short *)(buf + 10) = *(unsigned short *)(addrs + 12); - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - received ++; - } else - goto dropping; - } else { - struct net_device_stats *stats = &dev->stats; - ether3_outw(next_ptr >> 8, REG_RECVEND); - if (status & RXSTAT_OVERSIZE) stats->rx_over_errors ++; - if (status & RXSTAT_CRCERROR) stats->rx_crc_errors ++; - if (status & RXSTAT_DRIBBLEERROR) stats->rx_fifo_errors ++; - if (status & RXSTAT_SHORTPACKET) stats->rx_length_errors ++; - stats->rx_errors++; - } - } - while (-- maxcnt); - -done: - dev->stats.rx_packets += received; - priv(dev)->rx_head = next_ptr; - /* - * If rx went off line, then that means that the buffer may be full. We - * have dropped at least one packet. - */ - if (!(ether3_inw(REG_STATUS) & STAT_RXON)) { - dev->stats.rx_dropped++; - ether3_outw(next_ptr, REG_RECVPTR); - ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND); - } - - return maxcnt; - -dropping:{ - static unsigned long last_warned; - - ether3_outw(next_ptr >> 8, REG_RECVEND); - /* - * Don't print this message too many times... - */ - if (time_after(jiffies, last_warned + 10 * HZ)) { - last_warned = jiffies; - printk("%s: memory squeeze, dropping packet.\n", dev->name); - } - dev->stats.rx_dropped++; - goto done; - } -} - -/* - * Update stats for the transmitted packet(s) - */ -static void ether3_tx(struct net_device *dev) -{ - unsigned int tx_tail = priv(dev)->tx_tail; - int max_work = 14; - - do { - unsigned long status; - - /* - * Read the packet header - */ - ether3_setbuffer(dev, buffer_read, tx_tail * 0x600); - status = ether3_readlong(dev); - - /* - * Check to see if this packet has been transmitted - */ - if ((status & (TXSTAT_DONE | TXHDR_TRANSMIT)) != - (TXSTAT_DONE | TXHDR_TRANSMIT)) - break; - - /* - * Update errors - */ - if (!(status & (TXSTAT_BABBLED | TXSTAT_16COLLISIONS))) - dev->stats.tx_packets++; - else { - dev->stats.tx_errors++; - if (status & TXSTAT_16COLLISIONS) - dev->stats.collisions += 16; - if (status & TXSTAT_BABBLED) - dev->stats.tx_fifo_errors++; - } - - tx_tail = (tx_tail + 1) & 15; - } while (--max_work); - - if (priv(dev)->tx_tail != tx_tail) { - priv(dev)->tx_tail = tx_tail; - netif_wake_queue(dev); - } -} - -static void __devinit ether3_banner(void) -{ - static unsigned version_printed = 0; - - if (net_debug && version_printed++ == 0) - printk(KERN_INFO "%s", version); -} - -static const struct net_device_ops ether3_netdev_ops = { - .ndo_open = ether3_open, - .ndo_stop = ether3_close, - .ndo_start_xmit = ether3_sendpacket, - .ndo_set_multicast_list = ether3_setmulticastlist, - .ndo_tx_timeout = ether3_timeout, - .ndo_validate_addr = eth_validate_addr, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, -}; - -static int __devinit -ether3_probe(struct expansion_card *ec, const struct ecard_id *id) -{ - const struct ether3_data *data = id->data; - struct net_device *dev; - int bus_type, ret; - - ether3_banner(); - - ret = ecard_request_resources(ec); - if (ret) - goto out; - - dev = alloc_etherdev(sizeof(struct dev_priv)); - if (!dev) { - ret = -ENOMEM; - goto release; - } - - SET_NETDEV_DEV(dev, &ec->dev); - - priv(dev)->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); - if (!priv(dev)->base) { - ret = -ENOMEM; - goto free; - } - - ec->irqaddr = priv(dev)->base + data->base_offset; - ec->irqmask = 0xf0; - - priv(dev)->seeq = priv(dev)->base + data->base_offset; - dev->irq = ec->irq; - - ether3_addr(dev->dev_addr, ec); - - init_timer(&priv(dev)->timer); - - /* Reset card... - */ - ether3_outb(0x80, REG_CONFIG2 + 4); - bus_type = BUS_UNKNOWN; - udelay(4); - - /* Test using Receive Pointer (16-bit register) to find out - * how the ether3 is connected to the bus... - */ - if (ether3_probe_bus_8(dev, 0x100) && - ether3_probe_bus_8(dev, 0x201)) - bus_type = BUS_8; - - if (bus_type == BUS_UNKNOWN && - ether3_probe_bus_16(dev, 0x101) && - ether3_probe_bus_16(dev, 0x201)) - bus_type = BUS_16; - - switch (bus_type) { - case BUS_UNKNOWN: - printk(KERN_ERR "%s: unable to identify bus width\n", dev->name); - ret = -ENODEV; - goto free; - - case BUS_8: - printk(KERN_ERR "%s: %s found, but is an unsupported " - "8-bit card\n", dev->name, data->name); - ret = -ENODEV; - goto free; - - default: - break; - } - - if (ether3_init_2(dev)) { - ret = -ENODEV; - goto free; - } - - dev->netdev_ops = ðer3_netdev_ops; - dev->watchdog_timeo = 5 * HZ / 100; - - ret = register_netdev(dev); - if (ret) - goto free; - - printk("%s: %s in slot %d, %pM\n", - dev->name, data->name, ec->slot_no, dev->dev_addr); - - ecard_set_drvdata(ec, dev); - return 0; - - free: - free_netdev(dev); - release: - ecard_release_resources(ec); - out: - return ret; -} - -static void __devexit ether3_remove(struct expansion_card *ec) -{ - struct net_device *dev = ecard_get_drvdata(ec); - - ecard_set_drvdata(ec, NULL); - - unregister_netdev(dev); - free_netdev(dev); - ecard_release_resources(ec); -} - -static struct ether3_data ether3 = { - .name = "ether3", - .base_offset = 0, -}; - -static struct ether3_data etherb = { - .name = "etherb", - .base_offset = 0x800, -}; - -static const struct ecard_id ether3_ids[] = { - { MANU_ANT2, PROD_ANT_ETHER3, ðer3 }, - { MANU_ANT, PROD_ANT_ETHER3, ðer3 }, - { MANU_ANT, PROD_ANT_ETHERB, ðerb }, - { 0xffff, 0xffff } -}; - -static struct ecard_driver ether3_driver = { - .probe = ether3_probe, - .remove = __devexit_p(ether3_remove), - .id_table = ether3_ids, - .drv = { - .name = "ether3", - }, -}; - -static int __init ether3_init(void) -{ - return ecard_register_driver(ðer3_driver); -} - -static void __exit ether3_exit(void) -{ - ecard_remove_driver(ðer3_driver); -} - -module_init(ether3_init); -module_exit(ether3_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/net/arm/ether3.h b/drivers/net/arm/ether3.h deleted file mode 100644 index 2db63b08bdf3..000000000000 --- a/drivers/net/arm/ether3.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * linux/drivers/acorn/net/ether3.h - * - * Copyright (C) 1995-2000 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * network driver for Acorn/ANT Ether3 cards - */ - -#ifndef _LINUX_ether3_H -#define _LINUX_ether3_H - -/* use 0 for production, 1 for verification, >2 for debug. debug flags: */ -#define DEBUG_TX 2 -#define DEBUG_RX 4 -#define DEBUG_INT 8 -#define DEBUG_IC 16 -#ifndef NET_DEBUG -#define NET_DEBUG 0 -#endif - -#define priv(dev) ((struct dev_priv *)netdev_priv(dev)) - -/* Command register definitions & bits */ -#define REG_COMMAND (priv(dev)->seeq + 0x0000) -#define CMD_ENINTDMA 0x0001 -#define CMD_ENINTRX 0x0002 -#define CMD_ENINTTX 0x0004 -#define CMD_ENINTBUFWIN 0x0008 -#define CMD_ACKINTDMA 0x0010 -#define CMD_ACKINTRX 0x0020 -#define CMD_ACKINTTX 0x0040 -#define CMD_ACKINTBUFWIN 0x0080 -#define CMD_DMAON 0x0100 -#define CMD_RXON 0x0200 -#define CMD_TXON 0x0400 -#define CMD_DMAOFF 0x0800 -#define CMD_RXOFF 0x1000 -#define CMD_TXOFF 0x2000 -#define CMD_FIFOREAD 0x4000 -#define CMD_FIFOWRITE 0x8000 - -/* status register */ -#define REG_STATUS (priv(dev)->seeq + 0x0000) -#define STAT_ENINTSTAT 0x0001 -#define STAT_ENINTRX 0x0002 -#define STAT_ENINTTX 0x0004 -#define STAT_ENINTBUFWIN 0x0008 -#define STAT_INTDMA 0x0010 -#define STAT_INTRX 0x0020 -#define STAT_INTTX 0x0040 -#define STAT_INTBUFWIN 0x0080 -#define STAT_DMAON 0x0100 -#define STAT_RXON 0x0200 -#define STAT_TXON 0x0400 -#define STAT_FIFOFULL 0x2000 -#define STAT_FIFOEMPTY 0x4000 -#define STAT_FIFODIR 0x8000 - -/* configuration register 1 */ -#define REG_CONFIG1 (priv(dev)->seeq + 0x0040) -#define CFG1_BUFSELSTAT0 0x0000 -#define CFG1_BUFSELSTAT1 0x0001 -#define CFG1_BUFSELSTAT2 0x0002 -#define CFG1_BUFSELSTAT3 0x0003 -#define CFG1_BUFSELSTAT4 0x0004 -#define CFG1_BUFSELSTAT5 0x0005 -#define CFG1_ADDRPROM 0x0006 -#define CFG1_TRANSEND 0x0007 -#define CFG1_LOCBUFMEM 0x0008 -#define CFG1_INTVECTOR 0x0009 -#define CFG1_RECVSPECONLY 0x0000 -#define CFG1_RECVSPECBROAD 0x4000 -#define CFG1_RECVSPECBRMULTI 0x8000 -#define CFG1_RECVPROMISC 0xC000 - -/* The following aren't in 8004 */ -#define CFG1_DMABURSTCONT 0x0000 -#define CFG1_DMABURST800NS 0x0010 -#define CFG1_DMABURST1600NS 0x0020 -#define CFG1_DMABURST3200NS 0x0030 -#define CFG1_DMABURST1 0x0000 -#define CFG1_DMABURST4 0x0040 -#define CFG1_DMABURST8 0x0080 -#define CFG1_DMABURST16 0x00C0 -#define CFG1_RECVCOMPSTAT0 0x0100 -#define CFG1_RECVCOMPSTAT1 0x0200 -#define CFG1_RECVCOMPSTAT2 0x0400 -#define CFG1_RECVCOMPSTAT3 0x0800 -#define CFG1_RECVCOMPSTAT4 0x1000 -#define CFG1_RECVCOMPSTAT5 0x2000 - -/* configuration register 2 */ -#define REG_CONFIG2 (priv(dev)->seeq + 0x0080) -#define CFG2_BYTESWAP 0x0001 -#define CFG2_ERRENCRC 0x0008 -#define CFG2_ERRENDRIBBLE 0x0010 -#define CFG2_ERRSHORTFRAME 0x0020 -#define CFG2_SLOTSELECT 0x0040 -#define CFG2_PREAMSELECT 0x0080 -#define CFG2_ADDRLENGTH 0x0100 -#define CFG2_RECVCRC 0x0200 -#define CFG2_XMITNOCRC 0x0400 -#define CFG2_LOOPBACK 0x0800 -#define CFG2_CTRLO 0x1000 -#define CFG2_RESET 0x8000 - -#define REG_RECVEND (priv(dev)->seeq + 0x00c0) - -#define REG_BUFWIN (priv(dev)->seeq + 0x0100) - -#define REG_RECVPTR (priv(dev)->seeq + 0x0140) - -#define REG_TRANSMITPTR (priv(dev)->seeq + 0x0180) - -#define REG_DMAADDR (priv(dev)->seeq + 0x01c0) - -/* - * Cards transmit/receive headers - */ -#define TX_NEXT (0xffff) -#define TXHDR_ENBABBLEINT (1 << 16) -#define TXHDR_ENCOLLISIONINT (1 << 17) -#define TXHDR_EN16COLLISION (1 << 18) -#define TXHDR_ENSUCCESS (1 << 19) -#define TXHDR_DATAFOLLOWS (1 << 21) -#define TXHDR_CHAINCONTINUE (1 << 22) -#define TXHDR_TRANSMIT (1 << 23) -#define TXSTAT_BABBLED (1 << 24) -#define TXSTAT_COLLISION (1 << 25) -#define TXSTAT_16COLLISIONS (1 << 26) -#define TXSTAT_DONE (1 << 31) - -#define RX_NEXT (0xffff) -#define RXHDR_CHAINCONTINUE (1 << 6) -#define RXHDR_RECEIVE (1 << 7) -#define RXSTAT_OVERSIZE (1 << 8) -#define RXSTAT_CRCERROR (1 << 9) -#define RXSTAT_DRIBBLEERROR (1 << 10) -#define RXSTAT_SHORTPACKET (1 << 11) -#define RXSTAT_DONE (1 << 15) - - -#define TX_START 0x0000 -#define TX_END 0x6000 -#define RX_START 0x6000 -#define RX_LEN 0xA000 -#define RX_END 0x10000 -/* must be a power of 2 and greater than MAX_TX_BUFFERED */ -#define MAX_TXED 16 -#define MAX_TX_BUFFERED 10 - -struct dev_priv { - void __iomem *base; - void __iomem *seeq; - struct { - unsigned int command; - unsigned int config1; - unsigned int config2; - } regs; - unsigned char tx_head; /* buffer nr to insert next packet */ - unsigned char tx_tail; /* buffer nr of transmitting packet */ - unsigned int rx_head; /* address to fetch next packet from */ - struct timer_list timer; - int broken; /* 0 = ok, 1 = something went wrong */ -}; - -struct ether3_data { - const char name[8]; - unsigned long base_offset; -}; - -#endif diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig index 7d25fa490a25..35ed4c21a454 100644 --- a/drivers/net/ethernet/Kconfig +++ b/drivers/net/ethernet/Kconfig @@ -36,6 +36,7 @@ source "drivers/net/ethernet/pasemi/Kconfig" source "drivers/net/ethernet/qlogic/Kconfig" source "drivers/net/ethernet/racal/Kconfig" source "drivers/net/ethernet/realtek/Kconfig" +source "drivers/net/ethernet/seeq/Kconfig" source "drivers/net/ethernet/sfc/Kconfig" source "drivers/net/ethernet/sgi/Kconfig" source "drivers/net/ethernet/smsc/Kconfig" diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile index ec587159eec1..ea0999fd1494 100644 --- a/drivers/net/ethernet/Makefile +++ b/drivers/net/ethernet/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ obj-$(CONFIG_NET_VENDOR_RACAL) += racal/ obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ +obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/ obj-$(CONFIG_SFC) += sfc/ obj-$(CONFIG_NET_VENDOR_SGI) += sgi/ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/ diff --git a/drivers/net/ethernet/seeq/Kconfig b/drivers/net/ethernet/seeq/Kconfig new file mode 100644 index 000000000000..02667915b34a --- /dev/null +++ b/drivers/net/ethernet/seeq/Kconfig @@ -0,0 +1,45 @@ +# +# SEEQ device configuration +# + +config NET_VENDOR_SEEQ + bool "SEEQ devices" + depends on (ARM && ARCH_ACORN) || SGI_HAS_SEEQ || EXPERIMENTAL + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + . + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about SEEQ devices. If you say Y, you will be asked for + your specific card in the following questions. + +if NET_VENDOR_SEEQ + +config ARM_ETHER3 + tristate "Acorn/ANT Ether3 support" + depends on ARM && ARCH_ACORN + ---help--- + If you have an Acorn system with one of these network cards, you + should say Y to this option if you wish to use it with Linux. + +config SEEQ8005 + tristate "SEEQ8005 support (EXPERIMENTAL)" + depends on EXPERIMENTAL + ---help--- + This is a driver for the SEEQ 8005 network (Ethernet) card. If this + is for you, read the Ethernet-HOWTO, available from + . + + To compile this driver as a module, choose M here. The module + will be called seeq8005. + +config SGISEEQ + tristate "SGI Seeq ethernet controller support" + depends on SGI_HAS_SEEQ + ---help--- + Say Y here if you have an Seeq based Ethernet network card. This is + used in many Silicon Graphics machines. + +endif # NET_VENDOR_SEEQ diff --git a/drivers/net/ethernet/seeq/Makefile b/drivers/net/ethernet/seeq/Makefile new file mode 100644 index 000000000000..3e258a580c05 --- /dev/null +++ b/drivers/net/ethernet/seeq/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the SEEQ network device drivers +# + +obj-$(CONFIG_ARM_ETHER3) += ether3.o +obj-$(CONFIG_SEEQ8005) += seeq8005.o +obj-$(CONFIG_SGISEEQ) += sgiseeq.o diff --git a/drivers/net/ethernet/seeq/ether3.c b/drivers/net/ethernet/seeq/ether3.c new file mode 100644 index 000000000000..44a8746f4014 --- /dev/null +++ b/drivers/net/ethernet/seeq/ether3.c @@ -0,0 +1,918 @@ +/* + * linux/drivers/acorn/net/ether3.c + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * SEEQ nq8005 ethernet driver for Acorn/ANT Ether3 card + * for Acorn machines + * + * By Russell King, with some suggestions from borris@ant.co.uk + * + * Changelog: + * 1.04 RMK 29/02/1996 Won't pass packets that are from our ethernet + * address up to the higher levels - they're + * silently ignored. I/F can now be put into + * multicast mode. Receiver routine optimised. + * 1.05 RMK 30/02/1996 Now claims interrupt at open when part of + * the kernel rather than when a module. + * 1.06 RMK 02/03/1996 Various code cleanups + * 1.07 RMK 13/10/1996 Optimised interrupt routine and transmit + * routines. + * 1.08 RMK 14/10/1996 Fixed problem with too many packets, + * prevented the kernel message about dropped + * packets appearing too many times a second. + * Now does not disable all IRQs, only the IRQ + * used by this card. + * 1.09 RMK 10/11/1996 Only enables TX irq when buffer space is low, + * but we still service the TX queue if we get a + * RX interrupt. + * 1.10 RMK 15/07/1997 Fixed autoprobing of NQ8004. + * 1.11 RMK 16/11/1997 Fixed autoprobing of NQ8005A. + * 1.12 RMK 31/12/1997 Removed reference to dev_tint for Linux 2.1. + * RMK 27/06/1998 Changed asm/delay.h to linux/delay.h. + * 1.13 RMK 29/06/1998 Fixed problem with transmission of packets. + * Chip seems to have a bug in, whereby if the + * packet starts two bytes from the end of the + * buffer, it corrupts the receiver chain, and + * never updates the transmit status correctly. + * 1.14 RMK 07/01/1998 Added initial code for ETHERB addressing. + * 1.15 RMK 30/04/1999 More fixes to the transmit routine for buggy + * hardware. + * 1.16 RMK 10/02/2000 Updated for 2.3.43 + * 1.17 RMK 13/05/2000 Updated for 2.3.99-pre8 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +static char version[] __devinitdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n"; + +#include "ether3.h" + +static unsigned int net_debug = NET_DEBUG; + +static void ether3_setmulticastlist(struct net_device *dev); +static int ether3_rx(struct net_device *dev, unsigned int maxcnt); +static void ether3_tx(struct net_device *dev); +static int ether3_open (struct net_device *dev); +static int ether3_sendpacket (struct sk_buff *skb, struct net_device *dev); +static irqreturn_t ether3_interrupt (int irq, void *dev_id); +static int ether3_close (struct net_device *dev); +static void ether3_setmulticastlist (struct net_device *dev); +static void ether3_timeout(struct net_device *dev); + +#define BUS_16 2 +#define BUS_8 1 +#define BUS_UNKNOWN 0 + +/* --------------------------------------------------------------------------- */ + +typedef enum { + buffer_write, + buffer_read +} buffer_rw_t; + +/* + * ether3 read/write. Slow things down a bit... + * The SEEQ8005 doesn't like us writing to its registers + * too quickly. + */ +static inline void ether3_outb(int v, const void __iomem *r) +{ + writeb(v, r); + udelay(1); +} + +static inline void ether3_outw(int v, const void __iomem *r) +{ + writew(v, r); + udelay(1); +} +#define ether3_inb(r) ({ unsigned int __v = readb((r)); udelay(1); __v; }) +#define ether3_inw(r) ({ unsigned int __v = readw((r)); udelay(1); __v; }) + +static int +ether3_setbuffer(struct net_device *dev, buffer_rw_t read, int start) +{ + int timeout = 1000; + + ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); + ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND); + + while ((ether3_inw(REG_STATUS) & STAT_FIFOEMPTY) == 0) { + if (!timeout--) { + printk("%s: setbuffer broken\n", dev->name); + priv(dev)->broken = 1; + return 1; + } + udelay(1); + } + + if (read == buffer_read) { + ether3_outw(start, REG_DMAADDR); + ether3_outw(priv(dev)->regs.command | CMD_FIFOREAD, REG_COMMAND); + } else { + ether3_outw(priv(dev)->regs.command | CMD_FIFOWRITE, REG_COMMAND); + ether3_outw(start, REG_DMAADDR); + } + return 0; +} + +/* + * write data to the buffer memory + */ +#define ether3_writebuffer(dev,data,length) \ + writesw(REG_BUFWIN, (data), (length) >> 1) + +#define ether3_writeword(dev,data) \ + writew((data), REG_BUFWIN) + +#define ether3_writelong(dev,data) { \ + void __iomem *reg_bufwin = REG_BUFWIN; \ + writew((data), reg_bufwin); \ + writew((data) >> 16, reg_bufwin); \ +} + +/* + * read data from the buffer memory + */ +#define ether3_readbuffer(dev,data,length) \ + readsw(REG_BUFWIN, (data), (length) >> 1) + +#define ether3_readword(dev) \ + readw(REG_BUFWIN) + +#define ether3_readlong(dev) \ + readw(REG_BUFWIN) | (readw(REG_BUFWIN) << 16) + +/* + * Switch LED off... + */ +static void ether3_ledoff(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + ether3_outw(priv(dev)->regs.config2 |= CFG2_CTRLO, REG_CONFIG2); +} + +/* + * switch LED on... + */ +static inline void ether3_ledon(struct net_device *dev) +{ + del_timer(&priv(dev)->timer); + priv(dev)->timer.expires = jiffies + HZ / 50; /* leave on for 1/50th second */ + priv(dev)->timer.data = (unsigned long)dev; + priv(dev)->timer.function = ether3_ledoff; + add_timer(&priv(dev)->timer); + if (priv(dev)->regs.config2 & CFG2_CTRLO) + ether3_outw(priv(dev)->regs.config2 &= ~CFG2_CTRLO, REG_CONFIG2); +} + +/* + * Read the ethernet address string from the on board rom. + * This is an ascii string!!! + */ +static int __devinit +ether3_addr(char *addr, struct expansion_card *ec) +{ + struct in_chunk_dir cd; + char *s; + + if (ecard_readchunk(&cd, ec, 0xf5, 0) && (s = strchr(cd.d.string, '('))) { + int i; + for (i = 0; i<6; i++) { + addr[i] = simple_strtoul(s + 1, &s, 0x10); + if (*s != (i==5?')' : ':' )) + break; + } + if (i == 6) + return 0; + } + /* I wonder if we should even let the user continue in this case + * - no, it would be better to disable the device + */ + printk(KERN_ERR "ether3: Couldn't read a valid MAC address from card.\n"); + return -ENODEV; +} + +/* --------------------------------------------------------------------------- */ + +static int __devinit +ether3_ramtest(struct net_device *dev, unsigned char byte) +{ + unsigned char *buffer = kmalloc(RX_END, GFP_KERNEL); + int i,ret = 0; + int max_errors = 4; + int bad = -1; + + if (!buffer) + return 1; + + memset(buffer, byte, RX_END); + ether3_setbuffer(dev, buffer_write, 0); + ether3_writebuffer(dev, buffer, TX_END); + ether3_setbuffer(dev, buffer_write, RX_START); + ether3_writebuffer(dev, buffer + RX_START, RX_LEN); + memset(buffer, byte ^ 0xff, RX_END); + ether3_setbuffer(dev, buffer_read, 0); + ether3_readbuffer(dev, buffer, TX_END); + ether3_setbuffer(dev, buffer_read, RX_START); + ether3_readbuffer(dev, buffer + RX_START, RX_LEN); + + for (i = 0; i < RX_END; i++) { + if (buffer[i] != byte) { + if (max_errors > 0 && bad != buffer[i]) { + printk("%s: RAM failed with (%02X instead of %02X) at 0x%04X", + dev->name, buffer[i], byte, i); + ret = 2; + max_errors--; + bad = i; + } + } else { + if (bad != -1) { + if (bad != i - 1) + printk(" - 0x%04X\n", i - 1); + printk("\n"); + bad = -1; + } + } + } + if (bad != -1) + printk(" - 0xffff\n"); + kfree(buffer); + + return ret; +} + +/* ------------------------------------------------------------------------------- */ + +static int __devinit ether3_init_2(struct net_device *dev) +{ + int i; + + priv(dev)->regs.config1 = CFG1_RECVCOMPSTAT0|CFG1_DMABURST8; + priv(dev)->regs.config2 = CFG2_CTRLO|CFG2_RECVCRC|CFG2_ERRENCRC; + priv(dev)->regs.command = 0; + + /* + * Set up our hardware address + */ + ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1); + for (i = 0; i < 6; i++) + ether3_outb(dev->dev_addr[i], REG_BUFWIN); + + if (dev->flags & IFF_PROMISC) + priv(dev)->regs.config1 |= CFG1_RECVPROMISC; + else if (dev->flags & IFF_MULTICAST) + priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI; + else + priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD; + + /* + * There is a problem with the NQ8005 in that it occasionally loses the + * last two bytes. To get round this problem, we receive the CRC as + * well. That way, if we do lose the last two, then it doesn't matter. + */ + ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1); + ether3_outw((TX_END>>8) - 1, REG_BUFWIN); + ether3_outw(priv(dev)->rx_head, REG_RECVPTR); + ether3_outw(0, REG_TRANSMITPTR); + ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND); + ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); + ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); + ether3_outw(priv(dev)->regs.command, REG_COMMAND); + + i = ether3_ramtest(dev, 0x5A); + if(i) + return i; + i = ether3_ramtest(dev, 0x1E); + if(i) + return i; + + ether3_setbuffer(dev, buffer_write, 0); + ether3_writelong(dev, 0); + return 0; +} + +static void +ether3_init_for_open(struct net_device *dev) +{ + int i; + + /* Reset the chip */ + ether3_outw(CFG2_RESET, REG_CONFIG2); + udelay(4); + + priv(dev)->regs.command = 0; + ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND); + while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON)) + barrier(); + + ether3_outw(priv(dev)->regs.config1 | CFG1_BUFSELSTAT0, REG_CONFIG1); + for (i = 0; i < 6; i++) + ether3_outb(dev->dev_addr[i], REG_BUFWIN); + + priv(dev)->tx_head = 0; + priv(dev)->tx_tail = 0; + priv(dev)->regs.config2 |= CFG2_CTRLO; + priv(dev)->rx_head = RX_START; + + ether3_outw(priv(dev)->regs.config1 | CFG1_TRANSEND, REG_CONFIG1); + ether3_outw((TX_END>>8) - 1, REG_BUFWIN); + ether3_outw(priv(dev)->rx_head, REG_RECVPTR); + ether3_outw(priv(dev)->rx_head >> 8, REG_RECVEND); + ether3_outw(0, REG_TRANSMITPTR); + ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); + ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); + + ether3_setbuffer(dev, buffer_write, 0); + ether3_writelong(dev, 0); + + priv(dev)->regs.command = CMD_ENINTRX | CMD_ENINTTX; + ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND); +} + +static inline int +ether3_probe_bus_8(struct net_device *dev, int val) +{ + int write_low, write_high, read_low, read_high; + + write_low = val & 255; + write_high = val >> 8; + + printk(KERN_DEBUG "ether3_probe: write8 [%02X:%02X]", write_high, write_low); + + ether3_outb(write_low, REG_RECVPTR); + ether3_outb(write_high, REG_RECVPTR + 4); + + read_low = ether3_inb(REG_RECVPTR); + read_high = ether3_inb(REG_RECVPTR + 4); + + printk(", read8 [%02X:%02X]\n", read_high, read_low); + + return read_low == write_low && read_high == write_high; +} + +static inline int +ether3_probe_bus_16(struct net_device *dev, int val) +{ + int read_val; + + ether3_outw(val, REG_RECVPTR); + read_val = ether3_inw(REG_RECVPTR); + + printk(KERN_DEBUG "ether3_probe: write16 [%04X], read16 [%04X]\n", val, read_val); + + return read_val == val; +} + +/* + * Open/initialize the board. This is called (in the current kernel) + * sometime after booting when the 'ifconfig' program is run. + * + * This routine should set everything up anew at each open, even + * registers that "should" only need to be set once at boot, so that + * there is non-reboot way to recover if something goes wrong. + */ +static int +ether3_open(struct net_device *dev) +{ + if (!is_valid_ether_addr(dev->dev_addr)) { + printk(KERN_WARNING "%s: invalid ethernet MAC address\n", + dev->name); + return -EINVAL; + } + + if (request_irq(dev->irq, ether3_interrupt, 0, "ether3", dev)) + return -EAGAIN; + + ether3_init_for_open(dev); + + netif_start_queue(dev); + + return 0; +} + +/* + * The inverse routine to ether3_open(). + */ +static int +ether3_close(struct net_device *dev) +{ + netif_stop_queue(dev); + + disable_irq(dev->irq); + + ether3_outw(CMD_RXOFF|CMD_TXOFF, REG_COMMAND); + priv(dev)->regs.command = 0; + while (ether3_inw(REG_STATUS) & (STAT_RXON|STAT_TXON)) + barrier(); + ether3_outb(0x80, REG_CONFIG2 + 4); + ether3_outw(0, REG_COMMAND); + + free_irq(dev->irq, dev); + + return 0; +} + +/* + * Set or clear promiscuous/multicast mode filter for this adaptor. + * + * We don't attempt any packet filtering. The card may have a SEEQ 8004 + * in which does not have the other ethernet address registers present... + */ +static void ether3_setmulticastlist(struct net_device *dev) +{ + priv(dev)->regs.config1 &= ~CFG1_RECVPROMISC; + + if (dev->flags & IFF_PROMISC) { + /* promiscuous mode */ + priv(dev)->regs.config1 |= CFG1_RECVPROMISC; + } else if (dev->flags & IFF_ALLMULTI || !netdev_mc_empty(dev)) { + priv(dev)->regs.config1 |= CFG1_RECVSPECBRMULTI; + } else + priv(dev)->regs.config1 |= CFG1_RECVSPECBROAD; + + ether3_outw(priv(dev)->regs.config1 | CFG1_LOCBUFMEM, REG_CONFIG1); +} + +static void ether3_timeout(struct net_device *dev) +{ + unsigned long flags; + + del_timer(&priv(dev)->timer); + + local_irq_save(flags); + printk(KERN_ERR "%s: transmit timed out, network cable problem?\n", dev->name); + printk(KERN_ERR "%s: state: { status=%04X cfg1=%04X cfg2=%04X }\n", dev->name, + ether3_inw(REG_STATUS), ether3_inw(REG_CONFIG1), ether3_inw(REG_CONFIG2)); + printk(KERN_ERR "%s: { rpr=%04X rea=%04X tpr=%04X }\n", dev->name, + ether3_inw(REG_RECVPTR), ether3_inw(REG_RECVEND), ether3_inw(REG_TRANSMITPTR)); + printk(KERN_ERR "%s: tx head=%X tx tail=%X\n", dev->name, + priv(dev)->tx_head, priv(dev)->tx_tail); + ether3_setbuffer(dev, buffer_read, priv(dev)->tx_tail); + printk(KERN_ERR "%s: packet status = %08X\n", dev->name, ether3_readlong(dev)); + local_irq_restore(flags); + + priv(dev)->regs.config2 |= CFG2_CTRLO; + dev->stats.tx_errors += 1; + ether3_outw(priv(dev)->regs.config2, REG_CONFIG2); + priv(dev)->tx_head = priv(dev)->tx_tail = 0; + + netif_wake_queue(dev); +} + +/* + * Transmit a packet + */ +static int +ether3_sendpacket(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long flags; + unsigned int length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; + unsigned int ptr, next_ptr; + + if (priv(dev)->broken) { + dev_kfree_skb(skb); + dev->stats.tx_dropped++; + netif_start_queue(dev); + return NETDEV_TX_OK; + } + + length = (length + 1) & ~1; + if (length != skb->len) { + if (skb_padto(skb, length)) + goto out; + } + + next_ptr = (priv(dev)->tx_head + 1) & 15; + + local_irq_save(flags); + + if (priv(dev)->tx_tail == next_ptr) { + local_irq_restore(flags); + return NETDEV_TX_BUSY; /* unable to queue */ + } + + ptr = 0x600 * priv(dev)->tx_head; + priv(dev)->tx_head = next_ptr; + next_ptr *= 0x600; + +#define TXHDR_FLAGS (TXHDR_TRANSMIT|TXHDR_CHAINCONTINUE|TXHDR_DATAFOLLOWS|TXHDR_ENSUCCESS) + + ether3_setbuffer(dev, buffer_write, next_ptr); + ether3_writelong(dev, 0); + ether3_setbuffer(dev, buffer_write, ptr); + ether3_writelong(dev, 0); + ether3_writebuffer(dev, skb->data, length); + ether3_writeword(dev, htons(next_ptr)); + ether3_writeword(dev, TXHDR_CHAINCONTINUE >> 16); + ether3_setbuffer(dev, buffer_write, ptr); + ether3_writeword(dev, htons((ptr + length + 4))); + ether3_writeword(dev, TXHDR_FLAGS >> 16); + ether3_ledon(dev); + + if (!(ether3_inw(REG_STATUS) & STAT_TXON)) { + ether3_outw(ptr, REG_TRANSMITPTR); + ether3_outw(priv(dev)->regs.command | CMD_TXON, REG_COMMAND); + } + + next_ptr = (priv(dev)->tx_head + 1) & 15; + local_irq_restore(flags); + + dev_kfree_skb(skb); + + if (priv(dev)->tx_tail == next_ptr) + netif_stop_queue(dev); + + out: + return NETDEV_TX_OK; +} + +static irqreturn_t +ether3_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + unsigned int status, handled = IRQ_NONE; + +#if NET_DEBUG > 1 + if(net_debug & DEBUG_INT) + printk("eth3irq: %d ", irq); +#endif + + status = ether3_inw(REG_STATUS); + + if (status & STAT_INTRX) { + ether3_outw(CMD_ACKINTRX | priv(dev)->regs.command, REG_COMMAND); + ether3_rx(dev, 12); + handled = IRQ_HANDLED; + } + + if (status & STAT_INTTX) { + ether3_outw(CMD_ACKINTTX | priv(dev)->regs.command, REG_COMMAND); + ether3_tx(dev); + handled = IRQ_HANDLED; + } + +#if NET_DEBUG > 1 + if(net_debug & DEBUG_INT) + printk("done\n"); +#endif + return handled; +} + +/* + * If we have a good packet(s), get it/them out of the buffers. + */ +static int ether3_rx(struct net_device *dev, unsigned int maxcnt) +{ + unsigned int next_ptr = priv(dev)->rx_head, received = 0; + + ether3_ledon(dev); + + do { + unsigned int this_ptr, status; + unsigned char addrs[16]; + + /* + * read the first 16 bytes from the buffer. + * This contains the status bytes etc and ethernet addresses, + * and we also check the source ethernet address to see if + * it originated from us. + */ + { + unsigned int temp_ptr; + ether3_setbuffer(dev, buffer_read, next_ptr); + temp_ptr = ether3_readword(dev); + status = ether3_readword(dev); + if ((status & (RXSTAT_DONE | RXHDR_CHAINCONTINUE | RXHDR_RECEIVE)) != + (RXSTAT_DONE | RXHDR_CHAINCONTINUE) || !temp_ptr) + break; + + this_ptr = next_ptr + 4; + next_ptr = ntohs(temp_ptr); + } + ether3_setbuffer(dev, buffer_read, this_ptr); + ether3_readbuffer(dev, addrs+2, 12); + +if (next_ptr < RX_START || next_ptr >= RX_END) { + int i; + printk("%s: bad next pointer @%04X: ", dev->name, priv(dev)->rx_head); + printk("%02X %02X %02X %02X ", next_ptr >> 8, next_ptr & 255, status & 255, status >> 8); + for (i = 2; i < 14; i++) + printk("%02X ", addrs[i]); + printk("\n"); + next_ptr = priv(dev)->rx_head; + break; +} + /* + * ignore our own packets... + */ + if (!(*(unsigned long *)&dev->dev_addr[0] ^ *(unsigned long *)&addrs[2+6]) && + !(*(unsigned short *)&dev->dev_addr[4] ^ *(unsigned short *)&addrs[2+10])) { + maxcnt ++; /* compensate for loopedback packet */ + ether3_outw(next_ptr >> 8, REG_RECVEND); + } else + if (!(status & (RXSTAT_OVERSIZE|RXSTAT_CRCERROR|RXSTAT_DRIBBLEERROR|RXSTAT_SHORTPACKET))) { + unsigned int length = next_ptr - this_ptr; + struct sk_buff *skb; + + if (next_ptr <= this_ptr) + length += RX_END - RX_START; + + skb = dev_alloc_skb(length + 2); + if (skb) { + unsigned char *buf; + + skb_reserve(skb, 2); + buf = skb_put(skb, length); + ether3_readbuffer(dev, buf + 12, length - 12); + ether3_outw(next_ptr >> 8, REG_RECVEND); + *(unsigned short *)(buf + 0) = *(unsigned short *)(addrs + 2); + *(unsigned long *)(buf + 2) = *(unsigned long *)(addrs + 4); + *(unsigned long *)(buf + 6) = *(unsigned long *)(addrs + 8); + *(unsigned short *)(buf + 10) = *(unsigned short *)(addrs + 12); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + received ++; + } else + goto dropping; + } else { + struct net_device_stats *stats = &dev->stats; + ether3_outw(next_ptr >> 8, REG_RECVEND); + if (status & RXSTAT_OVERSIZE) stats->rx_over_errors ++; + if (status & RXSTAT_CRCERROR) stats->rx_crc_errors ++; + if (status & RXSTAT_DRIBBLEERROR) stats->rx_fifo_errors ++; + if (status & RXSTAT_SHORTPACKET) stats->rx_length_errors ++; + stats->rx_errors++; + } + } + while (-- maxcnt); + +done: + dev->stats.rx_packets += received; + priv(dev)->rx_head = next_ptr; + /* + * If rx went off line, then that means that the buffer may be full. We + * have dropped at least one packet. + */ + if (!(ether3_inw(REG_STATUS) & STAT_RXON)) { + dev->stats.rx_dropped++; + ether3_outw(next_ptr, REG_RECVPTR); + ether3_outw(priv(dev)->regs.command | CMD_RXON, REG_COMMAND); + } + + return maxcnt; + +dropping:{ + static unsigned long last_warned; + + ether3_outw(next_ptr >> 8, REG_RECVEND); + /* + * Don't print this message too many times... + */ + if (time_after(jiffies, last_warned + 10 * HZ)) { + last_warned = jiffies; + printk("%s: memory squeeze, dropping packet.\n", dev->name); + } + dev->stats.rx_dropped++; + goto done; + } +} + +/* + * Update stats for the transmitted packet(s) + */ +static void ether3_tx(struct net_device *dev) +{ + unsigned int tx_tail = priv(dev)->tx_tail; + int max_work = 14; + + do { + unsigned long status; + + /* + * Read the packet header + */ + ether3_setbuffer(dev, buffer_read, tx_tail * 0x600); + status = ether3_readlong(dev); + + /* + * Check to see if this packet has been transmitted + */ + if ((status & (TXSTAT_DONE | TXHDR_TRANSMIT)) != + (TXSTAT_DONE | TXHDR_TRANSMIT)) + break; + + /* + * Update errors + */ + if (!(status & (TXSTAT_BABBLED | TXSTAT_16COLLISIONS))) + dev->stats.tx_packets++; + else { + dev->stats.tx_errors++; + if (status & TXSTAT_16COLLISIONS) + dev->stats.collisions += 16; + if (status & TXSTAT_BABBLED) + dev->stats.tx_fifo_errors++; + } + + tx_tail = (tx_tail + 1) & 15; + } while (--max_work); + + if (priv(dev)->tx_tail != tx_tail) { + priv(dev)->tx_tail = tx_tail; + netif_wake_queue(dev); + } +} + +static void __devinit ether3_banner(void) +{ + static unsigned version_printed = 0; + + if (net_debug && version_printed++ == 0) + printk(KERN_INFO "%s", version); +} + +static const struct net_device_ops ether3_netdev_ops = { + .ndo_open = ether3_open, + .ndo_stop = ether3_close, + .ndo_start_xmit = ether3_sendpacket, + .ndo_set_multicast_list = ether3_setmulticastlist, + .ndo_tx_timeout = ether3_timeout, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, +}; + +static int __devinit +ether3_probe(struct expansion_card *ec, const struct ecard_id *id) +{ + const struct ether3_data *data = id->data; + struct net_device *dev; + int bus_type, ret; + + ether3_banner(); + + ret = ecard_request_resources(ec); + if (ret) + goto out; + + dev = alloc_etherdev(sizeof(struct dev_priv)); + if (!dev) { + ret = -ENOMEM; + goto release; + } + + SET_NETDEV_DEV(dev, &ec->dev); + + priv(dev)->base = ecardm_iomap(ec, ECARD_RES_MEMC, 0, 0); + if (!priv(dev)->base) { + ret = -ENOMEM; + goto free; + } + + ec->irqaddr = priv(dev)->base + data->base_offset; + ec->irqmask = 0xf0; + + priv(dev)->seeq = priv(dev)->base + data->base_offset; + dev->irq = ec->irq; + + ether3_addr(dev->dev_addr, ec); + + init_timer(&priv(dev)->timer); + + /* Reset card... + */ + ether3_outb(0x80, REG_CONFIG2 + 4); + bus_type = BUS_UNKNOWN; + udelay(4); + + /* Test using Receive Pointer (16-bit register) to find out + * how the ether3 is connected to the bus... + */ + if (ether3_probe_bus_8(dev, 0x100) && + ether3_probe_bus_8(dev, 0x201)) + bus_type = BUS_8; + + if (bus_type == BUS_UNKNOWN && + ether3_probe_bus_16(dev, 0x101) && + ether3_probe_bus_16(dev, 0x201)) + bus_type = BUS_16; + + switch (bus_type) { + case BUS_UNKNOWN: + printk(KERN_ERR "%s: unable to identify bus width\n", dev->name); + ret = -ENODEV; + goto free; + + case BUS_8: + printk(KERN_ERR "%s: %s found, but is an unsupported " + "8-bit card\n", dev->name, data->name); + ret = -ENODEV; + goto free; + + default: + break; + } + + if (ether3_init_2(dev)) { + ret = -ENODEV; + goto free; + } + + dev->netdev_ops = ðer3_netdev_ops; + dev->watchdog_timeo = 5 * HZ / 100; + + ret = register_netdev(dev); + if (ret) + goto free; + + printk("%s: %s in slot %d, %pM\n", + dev->name, data->name, ec->slot_no, dev->dev_addr); + + ecard_set_drvdata(ec, dev); + return 0; + + free: + free_netdev(dev); + release: + ecard_release_resources(ec); + out: + return ret; +} + +static void __devexit ether3_remove(struct expansion_card *ec) +{ + struct net_device *dev = ecard_get_drvdata(ec); + + ecard_set_drvdata(ec, NULL); + + unregister_netdev(dev); + free_netdev(dev); + ecard_release_resources(ec); +} + +static struct ether3_data ether3 = { + .name = "ether3", + .base_offset = 0, +}; + +static struct ether3_data etherb = { + .name = "etherb", + .base_offset = 0x800, +}; + +static const struct ecard_id ether3_ids[] = { + { MANU_ANT2, PROD_ANT_ETHER3, ðer3 }, + { MANU_ANT, PROD_ANT_ETHER3, ðer3 }, + { MANU_ANT, PROD_ANT_ETHERB, ðerb }, + { 0xffff, 0xffff } +}; + +static struct ecard_driver ether3_driver = { + .probe = ether3_probe, + .remove = __devexit_p(ether3_remove), + .id_table = ether3_ids, + .drv = { + .name = "ether3", + }, +}; + +static int __init ether3_init(void) +{ + return ecard_register_driver(ðer3_driver); +} + +static void __exit ether3_exit(void) +{ + ecard_remove_driver(ðer3_driver); +} + +module_init(ether3_init); +module_exit(ether3_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/seeq/ether3.h b/drivers/net/ethernet/seeq/ether3.h new file mode 100644 index 000000000000..2db63b08bdf3 --- /dev/null +++ b/drivers/net/ethernet/seeq/ether3.h @@ -0,0 +1,176 @@ +/* + * linux/drivers/acorn/net/ether3.h + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * network driver for Acorn/ANT Ether3 cards + */ + +#ifndef _LINUX_ether3_H +#define _LINUX_ether3_H + +/* use 0 for production, 1 for verification, >2 for debug. debug flags: */ +#define DEBUG_TX 2 +#define DEBUG_RX 4 +#define DEBUG_INT 8 +#define DEBUG_IC 16 +#ifndef NET_DEBUG +#define NET_DEBUG 0 +#endif + +#define priv(dev) ((struct dev_priv *)netdev_priv(dev)) + +/* Command register definitions & bits */ +#define REG_COMMAND (priv(dev)->seeq + 0x0000) +#define CMD_ENINTDMA 0x0001 +#define CMD_ENINTRX 0x0002 +#define CMD_ENINTTX 0x0004 +#define CMD_ENINTBUFWIN 0x0008 +#define CMD_ACKINTDMA 0x0010 +#define CMD_ACKINTRX 0x0020 +#define CMD_ACKINTTX 0x0040 +#define CMD_ACKINTBUFWIN 0x0080 +#define CMD_DMAON 0x0100 +#define CMD_RXON 0x0200 +#define CMD_TXON 0x0400 +#define CMD_DMAOFF 0x0800 +#define CMD_RXOFF 0x1000 +#define CMD_TXOFF 0x2000 +#define CMD_FIFOREAD 0x4000 +#define CMD_FIFOWRITE 0x8000 + +/* status register */ +#define REG_STATUS (priv(dev)->seeq + 0x0000) +#define STAT_ENINTSTAT 0x0001 +#define STAT_ENINTRX 0x0002 +#define STAT_ENINTTX 0x0004 +#define STAT_ENINTBUFWIN 0x0008 +#define STAT_INTDMA 0x0010 +#define STAT_INTRX 0x0020 +#define STAT_INTTX 0x0040 +#define STAT_INTBUFWIN 0x0080 +#define STAT_DMAON 0x0100 +#define STAT_RXON 0x0200 +#define STAT_TXON 0x0400 +#define STAT_FIFOFULL 0x2000 +#define STAT_FIFOEMPTY 0x4000 +#define STAT_FIFODIR 0x8000 + +/* configuration register 1 */ +#define REG_CONFIG1 (priv(dev)->seeq + 0x0040) +#define CFG1_BUFSELSTAT0 0x0000 +#define CFG1_BUFSELSTAT1 0x0001 +#define CFG1_BUFSELSTAT2 0x0002 +#define CFG1_BUFSELSTAT3 0x0003 +#define CFG1_BUFSELSTAT4 0x0004 +#define CFG1_BUFSELSTAT5 0x0005 +#define CFG1_ADDRPROM 0x0006 +#define CFG1_TRANSEND 0x0007 +#define CFG1_LOCBUFMEM 0x0008 +#define CFG1_INTVECTOR 0x0009 +#define CFG1_RECVSPECONLY 0x0000 +#define CFG1_RECVSPECBROAD 0x4000 +#define CFG1_RECVSPECBRMULTI 0x8000 +#define CFG1_RECVPROMISC 0xC000 + +/* The following aren't in 8004 */ +#define CFG1_DMABURSTCONT 0x0000 +#define CFG1_DMABURST800NS 0x0010 +#define CFG1_DMABURST1600NS 0x0020 +#define CFG1_DMABURST3200NS 0x0030 +#define CFG1_DMABURST1 0x0000 +#define CFG1_DMABURST4 0x0040 +#define CFG1_DMABURST8 0x0080 +#define CFG1_DMABURST16 0x00C0 +#define CFG1_RECVCOMPSTAT0 0x0100 +#define CFG1_RECVCOMPSTAT1 0x0200 +#define CFG1_RECVCOMPSTAT2 0x0400 +#define CFG1_RECVCOMPSTAT3 0x0800 +#define CFG1_RECVCOMPSTAT4 0x1000 +#define CFG1_RECVCOMPSTAT5 0x2000 + +/* configuration register 2 */ +#define REG_CONFIG2 (priv(dev)->seeq + 0x0080) +#define CFG2_BYTESWAP 0x0001 +#define CFG2_ERRENCRC 0x0008 +#define CFG2_ERRENDRIBBLE 0x0010 +#define CFG2_ERRSHORTFRAME 0x0020 +#define CFG2_SLOTSELECT 0x0040 +#define CFG2_PREAMSELECT 0x0080 +#define CFG2_ADDRLENGTH 0x0100 +#define CFG2_RECVCRC 0x0200 +#define CFG2_XMITNOCRC 0x0400 +#define CFG2_LOOPBACK 0x0800 +#define CFG2_CTRLO 0x1000 +#define CFG2_RESET 0x8000 + +#define REG_RECVEND (priv(dev)->seeq + 0x00c0) + +#define REG_BUFWIN (priv(dev)->seeq + 0x0100) + +#define REG_RECVPTR (priv(dev)->seeq + 0x0140) + +#define REG_TRANSMITPTR (priv(dev)->seeq + 0x0180) + +#define REG_DMAADDR (priv(dev)->seeq + 0x01c0) + +/* + * Cards transmit/receive headers + */ +#define TX_NEXT (0xffff) +#define TXHDR_ENBABBLEINT (1 << 16) +#define TXHDR_ENCOLLISIONINT (1 << 17) +#define TXHDR_EN16COLLISION (1 << 18) +#define TXHDR_ENSUCCESS (1 << 19) +#define TXHDR_DATAFOLLOWS (1 << 21) +#define TXHDR_CHAINCONTINUE (1 << 22) +#define TXHDR_TRANSMIT (1 << 23) +#define TXSTAT_BABBLED (1 << 24) +#define TXSTAT_COLLISION (1 << 25) +#define TXSTAT_16COLLISIONS (1 << 26) +#define TXSTAT_DONE (1 << 31) + +#define RX_NEXT (0xffff) +#define RXHDR_CHAINCONTINUE (1 << 6) +#define RXHDR_RECEIVE (1 << 7) +#define RXSTAT_OVERSIZE (1 << 8) +#define RXSTAT_CRCERROR (1 << 9) +#define RXSTAT_DRIBBLEERROR (1 << 10) +#define RXSTAT_SHORTPACKET (1 << 11) +#define RXSTAT_DONE (1 << 15) + + +#define TX_START 0x0000 +#define TX_END 0x6000 +#define RX_START 0x6000 +#define RX_LEN 0xA000 +#define RX_END 0x10000 +/* must be a power of 2 and greater than MAX_TX_BUFFERED */ +#define MAX_TXED 16 +#define MAX_TX_BUFFERED 10 + +struct dev_priv { + void __iomem *base; + void __iomem *seeq; + struct { + unsigned int command; + unsigned int config1; + unsigned int config2; + } regs; + unsigned char tx_head; /* buffer nr to insert next packet */ + unsigned char tx_tail; /* buffer nr of transmitting packet */ + unsigned int rx_head; /* address to fetch next packet from */ + struct timer_list timer; + int broken; /* 0 = ok, 1 = something went wrong */ +}; + +struct ether3_data { + const char name[8]; + unsigned long base_offset; +}; + +#endif diff --git a/drivers/net/ethernet/seeq/seeq8005.c b/drivers/net/ethernet/seeq/seeq8005.c new file mode 100644 index 000000000000..d2fce98f557f --- /dev/null +++ b/drivers/net/ethernet/seeq/seeq8005.c @@ -0,0 +1,752 @@ +/* seeq8005.c: A network driver for linux. */ +/* + Based on skeleton.c, + Written 1993-94 by Donald Becker. + See the skeleton.c file for further copyright information. + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + The author may be reached as hamish@zot.apana.org.au + + This file is a network device driver for the SEEQ 8005 chipset and + the Linux operating system. + +*/ + +static const char version[] = + "seeq8005.c:v1.00 8/07/95 Hamish Coleman (hamish@zot.apana.org.au)\n"; + +/* + Sources: + SEEQ 8005 databook + + Version history: + 1.00 Public release. cosmetic changes (no warnings now) + 0.68 Turning per- packet,interrupt debug messages off - testing for release. + 0.67 timing problems/bad buffer reads seem to be fixed now + 0.63 *!@$ protocol=eth_type_trans -- now packets flow + 0.56 Send working + 0.48 Receive working +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "seeq8005.h" + +/* First, a few definitions that the brave might change. */ +/* A zero-terminated list of I/O addresses to be probed. */ +static unsigned int seeq8005_portlist[] __initdata = + { 0x300, 0x320, 0x340, 0x360, 0}; + +/* use 0 for production, 1 for verification, >2 for debug */ +#ifndef NET_DEBUG +#define NET_DEBUG 1 +#endif +static unsigned int net_debug = NET_DEBUG; + +/* Information that need to be kept for each board. */ +struct net_local { + unsigned short receive_ptr; /* What address in packet memory do we expect a recv_pkt_header? */ + long open_time; /* Useless example local info. */ +}; + +/* The station (ethernet) address prefix, used for IDing the board. */ +#define SA_ADDR0 0x00 +#define SA_ADDR1 0x80 +#define SA_ADDR2 0x4b + +/* Index to functions, as function prototypes. */ + +static int seeq8005_probe1(struct net_device *dev, int ioaddr); +static int seeq8005_open(struct net_device *dev); +static void seeq8005_timeout(struct net_device *dev); +static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb, + struct net_device *dev); +static irqreturn_t seeq8005_interrupt(int irq, void *dev_id); +static void seeq8005_rx(struct net_device *dev); +static int seeq8005_close(struct net_device *dev); +static void set_multicast_list(struct net_device *dev); + +/* Example routines you must write ;->. */ +#define tx_done(dev) (inw(SEEQ_STATUS) & SEEQSTAT_TX_ON) +static void hardware_send_packet(struct net_device *dev, char *buf, int length); +extern void seeq8005_init(struct net_device *dev, int startp); +static inline void wait_for_buffer(struct net_device *dev); + + +/* Check for a network adaptor of this type, and return '0' iff one exists. + If dev->base_addr == 0, probe all likely locations. + If dev->base_addr == 1, always return failure. + */ + +static int io = 0x320; +static int irq = 10; + +struct net_device * __init seeq8005_probe(int unit) +{ + struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); + unsigned *port; + int err = 0; + + if (!dev) + return ERR_PTR(-ENODEV); + + if (unit >= 0) { + sprintf(dev->name, "eth%d", unit); + netdev_boot_setup_check(dev); + io = dev->base_addr; + irq = dev->irq; + } + + if (io > 0x1ff) { /* Check a single specified location. */ + err = seeq8005_probe1(dev, io); + } else if (io != 0) { /* Don't probe at all. */ + err = -ENXIO; + } else { + for (port = seeq8005_portlist; *port; port++) { + if (seeq8005_probe1(dev, *port) == 0) + break; + } + if (!*port) + err = -ENODEV; + } + if (err) + goto out; + err = register_netdev(dev); + if (err) + goto out1; + return dev; +out1: + release_region(dev->base_addr, SEEQ8005_IO_EXTENT); +out: + free_netdev(dev); + return ERR_PTR(err); +} + +static const struct net_device_ops seeq8005_netdev_ops = { + .ndo_open = seeq8005_open, + .ndo_stop = seeq8005_close, + .ndo_start_xmit = seeq8005_send_packet, + .ndo_tx_timeout = seeq8005_timeout, + .ndo_set_multicast_list = set_multicast_list, + .ndo_change_mtu = eth_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, +}; + +/* This is the real probe routine. Linux has a history of friendly device + probes on the ISA bus. A good device probes avoids doing writes, and + verifies that the correct device exists and functions. */ + +static int __init seeq8005_probe1(struct net_device *dev, int ioaddr) +{ + static unsigned version_printed; + int i,j; + unsigned char SA_prom[32]; + int old_cfg1; + int old_cfg2; + int old_stat; + int old_dmaar; + int old_rear; + int retval; + + if (!request_region(ioaddr, SEEQ8005_IO_EXTENT, "seeq8005")) + return -ENODEV; + + if (net_debug>1) + printk("seeq8005: probing at 0x%x\n",ioaddr); + + old_stat = inw(SEEQ_STATUS); /* read status register */ + if (old_stat == 0xffff) { + retval = -ENODEV; + goto out; /* assume that 0xffff == no device */ + } + if ( (old_stat & 0x1800) != 0x1800 ) { /* assume that unused bits are 1, as my manual says */ + if (net_debug>1) { + printk("seeq8005: reserved stat bits != 0x1800\n"); + printk(" == 0x%04x\n",old_stat); + } + retval = -ENODEV; + goto out; + } + + old_rear = inw(SEEQ_REA); + if (old_rear == 0xffff) { + outw(0,SEEQ_REA); + if (inw(SEEQ_REA) == 0xffff) { /* assume that 0xffff == no device */ + retval = -ENODEV; + goto out; + } + } else if ((old_rear & 0xff00) != 0xff00) { /* assume that unused bits are 1 */ + if (net_debug>1) { + printk("seeq8005: unused rear bits != 0xff00\n"); + printk(" == 0x%04x\n",old_rear); + } + retval = -ENODEV; + goto out; + } + + old_cfg2 = inw(SEEQ_CFG2); /* read CFG2 register */ + old_cfg1 = inw(SEEQ_CFG1); + old_dmaar = inw(SEEQ_DMAAR); + + if (net_debug>4) { + printk("seeq8005: stat = 0x%04x\n",old_stat); + printk("seeq8005: cfg1 = 0x%04x\n",old_cfg1); + printk("seeq8005: cfg2 = 0x%04x\n",old_cfg2); + printk("seeq8005: raer = 0x%04x\n",old_rear); + printk("seeq8005: dmaar= 0x%04x\n",old_dmaar); + } + + outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); /* setup for reading PROM */ + outw( 0, SEEQ_DMAAR); /* set starting PROM address */ + outw( SEEQCFG1_BUFFER_PROM, SEEQ_CFG1); /* set buffer to look at PROM */ + + + j=0; + for(i=0; i <32; i++) { + j+= SA_prom[i] = inw(SEEQ_BUFFER) & 0xff; + } + +#if 0 + /* untested because I only have the one card */ + if ( (j&0xff) != 0 ) { /* checksum appears to be 8bit = 0 */ + if (net_debug>1) { /* check this before deciding that we have a card */ + printk("seeq8005: prom sum error\n"); + } + outw( old_stat, SEEQ_STATUS); + outw( old_dmaar, SEEQ_DMAAR); + outw( old_cfg1, SEEQ_CFG1); + retval = -ENODEV; + goto out; + } +#endif + + outw( SEEQCFG2_RESET, SEEQ_CFG2); /* reset the card */ + udelay(5); + outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD); + + if (net_debug) { + printk("seeq8005: prom sum = 0x%08x\n",j); + for(j=0; j<32; j+=16) { + printk("seeq8005: prom %02x: ",j); + for(i=0;i<16;i++) { + printk("%02x ",SA_prom[j|i]); + } + printk(" "); + for(i=0;i<16;i++) { + if ((SA_prom[j|i]>31)&&(SA_prom[j|i]<127)) { + printk("%c", SA_prom[j|i]); + } else { + printk(" "); + } + } + printk("\n"); + } + } + +#if 0 + /* + * testing the packet buffer memory doesn't work yet + * but all other buffer accesses do + * - fixing is not a priority + */ + if (net_debug>1) { /* test packet buffer memory */ + printk("seeq8005: testing packet buffer ... "); + outw( SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1); + outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); + outw( 0 , SEEQ_DMAAR); + for(i=0;i<32768;i++) { + outw(0x5a5a, SEEQ_BUFFER); + } + j=jiffies+HZ; + while ( ((inw(SEEQ_STATUS) & SEEQSTAT_FIFO_EMPTY) != SEEQSTAT_FIFO_EMPTY) && time_before(jiffies, j) ) + mb(); + outw( 0 , SEEQ_DMAAR); + while ( ((inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && time_before(jiffies, j+HZ)) + mb(); + if ( (inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) == SEEQSTAT_WINDOW_INT) + outw( SEEQCMD_WINDOW_INT_ACK | (inw(SEEQ_STATUS)& SEEQCMD_INT_MASK), SEEQ_CMD); + outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); + j=0; + for(i=0;i<32768;i++) { + if (inw(SEEQ_BUFFER) != 0x5a5a) + j++; + } + if (j) { + printk("%i\n",j); + } else { + printk("ok.\n"); + } + } +#endif + + if (net_debug && version_printed++ == 0) + printk(version); + + printk("%s: %s found at %#3x, ", dev->name, "seeq8005", ioaddr); + + /* Fill in the 'dev' fields. */ + dev->base_addr = ioaddr; + dev->irq = irq; + + /* Retrieve and print the ethernet address. */ + for (i = 0; i < 6; i++) + dev->dev_addr[i] = SA_prom[i+6]; + printk("%pM", dev->dev_addr); + + if (dev->irq == 0xff) + ; /* Do nothing: a user-level program will set it. */ + else if (dev->irq < 2) { /* "Auto-IRQ" */ + unsigned long cookie = probe_irq_on(); + + outw( SEEQCMD_RX_INT_EN | SEEQCMD_SET_RX_ON | SEEQCMD_SET_RX_OFF, SEEQ_CMD ); + + dev->irq = probe_irq_off(cookie); + + if (net_debug >= 2) + printk(" autoirq is %d\n", dev->irq); + } else if (dev->irq == 2) + /* Fixup for users that don't know that IRQ 2 is really IRQ 9, + * or don't know which one to set. + */ + dev->irq = 9; + +#if 0 + { + int irqval = request_irq(dev->irq, seeq8005_interrupt, 0, "seeq8005", dev); + if (irqval) { + printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name, + dev->irq, irqval); + retval = -EAGAIN; + goto out; + } + } +#endif + dev->netdev_ops = &seeq8005_netdev_ops; + dev->watchdog_timeo = HZ/20; + dev->flags &= ~IFF_MULTICAST; + + return 0; +out: + release_region(ioaddr, SEEQ8005_IO_EXTENT); + return retval; +} + + +/* Open/initialize the board. This is called (in the current kernel) + sometime after booting when the 'ifconfig' program is run. + + This routine should set everything up anew at each open, even + registers that "should" only need to be set once at boot, so that + there is non-reboot way to recover if something goes wrong. + */ +static int seeq8005_open(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + + { + int irqval = request_irq(dev->irq, seeq8005_interrupt, 0, "seeq8005", dev); + if (irqval) { + printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name, + dev->irq, irqval); + return -EAGAIN; + } + } + + /* Reset the hardware here. Don't forget to set the station address. */ + seeq8005_init(dev, 1); + + lp->open_time = jiffies; + + netif_start_queue(dev); + return 0; +} + +static void seeq8005_timeout(struct net_device *dev) +{ + int ioaddr = dev->base_addr; + printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, + tx_done(dev) ? "IRQ conflict" : "network cable problem"); + /* Try to restart the adaptor. */ + seeq8005_init(dev, 1); + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); +} + +static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb, + struct net_device *dev) +{ + short length = skb->len; + unsigned char *buf; + + if (length < ETH_ZLEN) { + if (skb_padto(skb, ETH_ZLEN)) + return NETDEV_TX_OK; + length = ETH_ZLEN; + } + buf = skb->data; + + /* Block a timer-based transmit from overlapping */ + netif_stop_queue(dev); + + hardware_send_packet(dev, buf, length); + dev->stats.tx_bytes += length; + dev_kfree_skb (skb); + /* You might need to clean up and record Tx statistics here. */ + + return NETDEV_TX_OK; +} + +/* + * wait_for_buffer + * + * This routine waits for the SEEQ chip to assert that the FIFO is ready + * by checking for a window interrupt, and then clearing it. This has to + * occur in the interrupt handler! + */ +inline void wait_for_buffer(struct net_device * dev) +{ + int ioaddr = dev->base_addr; + unsigned long tmp; + int status; + + tmp = jiffies + HZ; + while ( ( ((status=inw(SEEQ_STATUS)) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && time_before(jiffies, tmp)) + cpu_relax(); + + if ( (status & SEEQSTAT_WINDOW_INT) == SEEQSTAT_WINDOW_INT) + outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); +} + +/* The typical workload of the driver: + Handle the network interface interrupts. */ +static irqreturn_t seeq8005_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct net_local *lp; + int ioaddr, status, boguscount = 0; + int handled = 0; + + ioaddr = dev->base_addr; + lp = netdev_priv(dev); + + status = inw(SEEQ_STATUS); + do { + if (net_debug >2) { + printk("%s: int, status=0x%04x\n",dev->name,status); + } + + if (status & SEEQSTAT_WINDOW_INT) { + handled = 1; + outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); + if (net_debug) { + printk("%s: window int!\n",dev->name); + } + } + if (status & SEEQSTAT_TX_INT) { + handled = 1; + outw( SEEQCMD_TX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); + dev->stats.tx_packets++; + netif_wake_queue(dev); /* Inform upper layers. */ + } + if (status & SEEQSTAT_RX_INT) { + handled = 1; + /* Got a packet(s). */ + seeq8005_rx(dev); + } + status = inw(SEEQ_STATUS); + } while ( (++boguscount < 10) && (status & SEEQSTAT_ANY_INT)) ; + + if(net_debug>2) { + printk("%s: eoi\n",dev->name); + } + return IRQ_RETVAL(handled); +} + +/* We have a good packet(s), get it/them out of the buffers. */ +static void seeq8005_rx(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int boguscount = 10; + int pkt_hdr; + int ioaddr = dev->base_addr; + + do { + int next_packet; + int pkt_len; + int i; + int status; + + status = inw(SEEQ_STATUS); + outw( lp->receive_ptr, SEEQ_DMAAR); + outw(SEEQCMD_FIFO_READ | SEEQCMD_RX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); + wait_for_buffer(dev); + next_packet = ntohs(inw(SEEQ_BUFFER)); + pkt_hdr = inw(SEEQ_BUFFER); + + if (net_debug>2) { + printk("%s: 0x%04x recv next=0x%04x, hdr=0x%04x\n",dev->name,lp->receive_ptr,next_packet,pkt_hdr); + } + + if ((next_packet == 0) || ((pkt_hdr & SEEQPKTH_CHAIN)==0)) { /* Read all the frames? */ + return; /* Done for now */ + } + + if ((pkt_hdr & SEEQPKTS_DONE)==0) + break; + + if (next_packet < lp->receive_ptr) { + pkt_len = (next_packet + 0x10000 - ((DEFAULT_TEA+1)<<8)) - lp->receive_ptr - 4; + } else { + pkt_len = next_packet - lp->receive_ptr - 4; + } + + if (next_packet < ((DEFAULT_TEA+1)<<8)) { /* is the next_packet address sane? */ + printk("%s: recv packet ring corrupt, resetting board\n",dev->name); + seeq8005_init(dev,1); + return; + } + + lp->receive_ptr = next_packet; + + if (net_debug>2) { + printk("%s: recv len=0x%04x\n",dev->name,pkt_len); + } + + if (pkt_hdr & SEEQPKTS_ANY_ERROR) { /* There was an error. */ + dev->stats.rx_errors++; + if (pkt_hdr & SEEQPKTS_SHORT) dev->stats.rx_frame_errors++; + if (pkt_hdr & SEEQPKTS_DRIB) dev->stats.rx_frame_errors++; + if (pkt_hdr & SEEQPKTS_OVERSIZE) dev->stats.rx_over_errors++; + if (pkt_hdr & SEEQPKTS_CRC_ERR) dev->stats.rx_crc_errors++; + /* skip over this packet */ + outw( SEEQCMD_FIFO_WRITE | SEEQCMD_DMA_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); + outw( (lp->receive_ptr & 0xff00)>>8, SEEQ_REA); + } else { + /* Malloc up new buffer. */ + struct sk_buff *skb; + unsigned char *buf; + + skb = dev_alloc_skb(pkt_len); + if (skb == NULL) { + printk("%s: Memory squeeze, dropping packet.\n", dev->name); + dev->stats.rx_dropped++; + break; + } + skb_reserve(skb, 2); /* align data on 16 byte */ + buf = skb_put(skb,pkt_len); + + insw(SEEQ_BUFFER, buf, (pkt_len + 1) >> 1); + + if (net_debug>2) { + char * p = buf; + printk("%s: recv ",dev->name); + for(i=0;i<14;i++) { + printk("%02x ",*(p++)&0xff); + } + printk("\n"); + } + + skb->protocol=eth_type_trans(skb,dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; + } + } while ((--boguscount) && (pkt_hdr & SEEQPKTH_CHAIN)); + + /* If any worth-while packets have been received, netif_rx() + has done a mark_bh(NET_BH) for us and will work on them + when we get to the bottom-half routine. */ +} + +/* The inverse routine to net_open(). */ +static int seeq8005_close(struct net_device *dev) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + + lp->open_time = 0; + + netif_stop_queue(dev); + + /* Flush the Tx and disable Rx here. */ + outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD); + + free_irq(dev->irq, dev); + + /* Update the statistics here. */ + + return 0; + +} + +/* Set or clear the multicast filter for this adaptor. + num_addrs == -1 Promiscuous mode, receive all packets + num_addrs == 0 Normal mode, clear multicast list + num_addrs > 0 Multicast mode, receive normal and MC packets, and do + best-effort filtering. + */ +static void set_multicast_list(struct net_device *dev) +{ +/* + * I _could_ do up to 6 addresses here, but won't (yet?) + */ + +#if 0 + int ioaddr = dev->base_addr; +/* + * hmm, not even sure if my matching works _anyway_ - seem to be receiving + * _everything_ . . . + */ + + if (num_addrs) { /* Enable promiscuous mode */ + outw( (inw(SEEQ_CFG1) & ~SEEQCFG1_MATCH_MASK)| SEEQCFG1_MATCH_ALL, SEEQ_CFG1); + dev->flags|=IFF_PROMISC; + } else { /* Disable promiscuous mode, use normal mode */ + outw( (inw(SEEQ_CFG1) & ~SEEQCFG1_MATCH_MASK)| SEEQCFG1_MATCH_BROAD, SEEQ_CFG1); + } +#endif +} + +void seeq8005_init(struct net_device *dev, int startp) +{ + struct net_local *lp = netdev_priv(dev); + int ioaddr = dev->base_addr; + int i; + + outw(SEEQCFG2_RESET, SEEQ_CFG2); /* reset device */ + udelay(5); + + outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); + outw( 0, SEEQ_DMAAR); /* load start address into both low and high byte */ +/* wait_for_buffer(dev); */ /* I think that you only need a wait for memory buffer */ + outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1); + + for(i=0;i<6;i++) { /* set Station address */ + outb(dev->dev_addr[i], SEEQ_BUFFER); + udelay(2); + } + + outw( SEEQCFG1_BUFFER_TEA, SEEQ_CFG1); /* set xmit end area pointer to 16K */ + outb( DEFAULT_TEA, SEEQ_BUFFER); /* this gives us 16K of send buffer and 48K of recv buffer */ + + lp->receive_ptr = (DEFAULT_TEA+1)<<8; /* so we can find our packet_header */ + outw( lp->receive_ptr, SEEQ_RPR); /* Receive Pointer Register is set to recv buffer memory */ + + outw( 0x00ff, SEEQ_REA); /* Receive Area End */ + + if (net_debug>4) { + printk("%s: SA0 = ",dev->name); + + outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); + outw( 0, SEEQ_DMAAR); + outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1); + + for(i=0;i<6;i++) { + printk("%02x ",inb(SEEQ_BUFFER)); + } + printk("\n"); + } + + outw( SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD | SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1); + outw( SEEQCFG2_AUTO_REA | SEEQCFG2_CTRLO, SEEQ_CFG2); + outw( SEEQCMD_SET_RX_ON | SEEQCMD_TX_INT_EN | SEEQCMD_RX_INT_EN, SEEQ_CMD); + + if (net_debug>4) { + int old_cfg1; + old_cfg1 = inw(SEEQ_CFG1); + printk("%s: stat = 0x%04x\n",dev->name,inw(SEEQ_STATUS)); + printk("%s: cfg1 = 0x%04x\n",dev->name,old_cfg1); + printk("%s: cfg2 = 0x%04x\n",dev->name,inw(SEEQ_CFG2)); + printk("%s: raer = 0x%04x\n",dev->name,inw(SEEQ_REA)); + printk("%s: dmaar= 0x%04x\n",dev->name,inw(SEEQ_DMAAR)); + + } +} + + +static void hardware_send_packet(struct net_device * dev, char *buf, int length) +{ + int ioaddr = dev->base_addr; + int status = inw(SEEQ_STATUS); + int transmit_ptr = 0; + unsigned long tmp; + + if (net_debug>4) { + printk("%s: send 0x%04x\n",dev->name,length); + } + + /* Set FIFO to writemode and set packet-buffer address */ + outw( SEEQCMD_FIFO_WRITE | (status & SEEQCMD_INT_MASK), SEEQ_CMD); + outw( transmit_ptr, SEEQ_DMAAR); + + /* output SEEQ Packet header barfage */ + outw( htons(length + 4), SEEQ_BUFFER); + outw( SEEQPKTH_XMIT | SEEQPKTH_DATA_FOLLOWS | SEEQPKTH_XMIT_INT_EN, SEEQ_BUFFER ); + + /* blat the buffer */ + outsw( SEEQ_BUFFER, buf, (length +1) >> 1); + /* paranoia !! */ + outw( 0, SEEQ_BUFFER); + outw( 0, SEEQ_BUFFER); + + /* set address of start of transmit chain */ + outw( transmit_ptr, SEEQ_TPR); + + /* drain FIFO */ + tmp = jiffies; + while ( (((status=inw(SEEQ_STATUS)) & SEEQSTAT_FIFO_EMPTY) == 0) && time_before(jiffies, tmp + HZ)) + mb(); + + /* doit ! */ + outw( SEEQCMD_WINDOW_INT_ACK | SEEQCMD_SET_TX_ON | (status & SEEQCMD_INT_MASK), SEEQ_CMD); + +} + + +#ifdef MODULE + +static struct net_device *dev_seeq; +MODULE_LICENSE("GPL"); +module_param(io, int, 0); +module_param(irq, int, 0); +MODULE_PARM_DESC(io, "SEEQ 8005 I/O base address"); +MODULE_PARM_DESC(irq, "SEEQ 8005 IRQ number"); + +int __init init_module(void) +{ + dev_seeq = seeq8005_probe(-1); + if (IS_ERR(dev_seeq)) + return PTR_ERR(dev_seeq); + return 0; +} + +void __exit cleanup_module(void) +{ + unregister_netdev(dev_seeq); + release_region(dev_seeq->base_addr, SEEQ8005_IO_EXTENT); + free_netdev(dev_seeq); +} + +#endif /* MODULE */ diff --git a/drivers/net/ethernet/seeq/seeq8005.h b/drivers/net/ethernet/seeq/seeq8005.h new file mode 100644 index 000000000000..5dfb0098c6ca --- /dev/null +++ b/drivers/net/ethernet/seeq/seeq8005.h @@ -0,0 +1,156 @@ +/* + * defines, etc for the seeq8005 + */ + +/* + * This file is distributed under GPL. + * + * This style and layout of this file is also copied + * from many of the other linux network device drivers. + */ + +/* The number of low I/O ports used by the ethercard. */ +#define SEEQ8005_IO_EXTENT 16 + +#define SEEQ_B (ioaddr) + +#define SEEQ_CMD (SEEQ_B) /* Write only */ +#define SEEQ_STATUS (SEEQ_B) /* Read only */ +#define SEEQ_CFG1 (SEEQ_B + 2) +#define SEEQ_CFG2 (SEEQ_B + 4) +#define SEEQ_REA (SEEQ_B + 6) /* Receive End Area Register */ +#define SEEQ_RPR (SEEQ_B + 10) /* Receive Pointer Register */ +#define SEEQ_TPR (SEEQ_B + 12) /* Transmit Pointer Register */ +#define SEEQ_DMAAR (SEEQ_B + 14) /* DMA Address Register */ +#define SEEQ_BUFFER (SEEQ_B + 8) /* Buffer Window Register */ + +#define DEFAULT_TEA (0x3f) + +#define SEEQCMD_DMA_INT_EN (0x0001) /* DMA Interrupt Enable */ +#define SEEQCMD_RX_INT_EN (0x0002) /* Receive Interrupt Enable */ +#define SEEQCMD_TX_INT_EN (0x0004) /* Transmit Interrupt Enable */ +#define SEEQCMD_WINDOW_INT_EN (0x0008) /* What the hell is this for?? */ +#define SEEQCMD_INT_MASK (0x000f) + +#define SEEQCMD_DMA_INT_ACK (0x0010) /* DMA ack */ +#define SEEQCMD_RX_INT_ACK (0x0020) +#define SEEQCMD_TX_INT_ACK (0x0040) +#define SEEQCMD_WINDOW_INT_ACK (0x0080) +#define SEEQCMD_ACK_ALL (0x00f0) + +#define SEEQCMD_SET_DMA_ON (0x0100) /* Enables DMA Request logic */ +#define SEEQCMD_SET_RX_ON (0x0200) /* Enables Packet RX */ +#define SEEQCMD_SET_TX_ON (0x0400) /* Starts TX run */ +#define SEEQCMD_SET_DMA_OFF (0x0800) +#define SEEQCMD_SET_RX_OFF (0x1000) +#define SEEQCMD_SET_TX_OFF (0x2000) +#define SEEQCMD_SET_ALL_OFF (0x3800) /* set all logic off */ + +#define SEEQCMD_FIFO_READ (0x4000) /* Set FIFO to read mode (read from Buffer) */ +#define SEEQCMD_FIFO_WRITE (0x8000) /* Set FIFO to write mode */ + +#define SEEQSTAT_DMA_INT_EN (0x0001) /* Status of interrupt enable */ +#define SEEQSTAT_RX_INT_EN (0x0002) +#define SEEQSTAT_TX_INT_EN (0x0004) +#define SEEQSTAT_WINDOW_INT_EN (0x0008) + +#define SEEQSTAT_DMA_INT (0x0010) /* Interrupt flagged */ +#define SEEQSTAT_RX_INT (0x0020) +#define SEEQSTAT_TX_INT (0x0040) +#define SEEQSTAT_WINDOW_INT (0x0080) +#define SEEQSTAT_ANY_INT (0x00f0) + +#define SEEQSTAT_DMA_ON (0x0100) /* DMA logic on */ +#define SEEQSTAT_RX_ON (0x0200) /* Packet RX on */ +#define SEEQSTAT_TX_ON (0x0400) /* TX running */ + +#define SEEQSTAT_FIFO_FULL (0x2000) +#define SEEQSTAT_FIFO_EMPTY (0x4000) +#define SEEQSTAT_FIFO_DIR (0x8000) /* 1=read, 0=write */ + +#define SEEQCFG1_BUFFER_MASK (0x000f) /* define what maps into the BUFFER register */ +#define SEEQCFG1_BUFFER_MAC0 (0x0000) /* MAC station addresses 0-5 */ +#define SEEQCFG1_BUFFER_MAC1 (0x0001) +#define SEEQCFG1_BUFFER_MAC2 (0x0002) +#define SEEQCFG1_BUFFER_MAC3 (0x0003) +#define SEEQCFG1_BUFFER_MAC4 (0x0004) +#define SEEQCFG1_BUFFER_MAC5 (0x0005) +#define SEEQCFG1_BUFFER_PROM (0x0006) /* The Address/CFG PROM */ +#define SEEQCFG1_BUFFER_TEA (0x0007) /* Transmit end area */ +#define SEEQCFG1_BUFFER_BUFFER (0x0008) /* Packet buffer memory */ +#define SEEQCFG1_BUFFER_INT_VEC (0x0009) /* Interrupt Vector */ + +#define SEEQCFG1_DMA_INTVL_MASK (0x0030) +#define SEEQCFG1_DMA_CONT (0x0000) +#define SEEQCFG1_DMA_800ns (0x0010) +#define SEEQCFG1_DMA_1600ns (0x0020) +#define SEEQCFG1_DMA_3200ns (0x0030) + +#define SEEQCFG1_DMA_LEN_MASK (0x00c0) +#define SEEQCFG1_DMA_LEN1 (0x0000) +#define SEEQCFG1_DMA_LEN2 (0x0040) +#define SEEQCFG1_DMA_LEN4 (0x0080) +#define SEEQCFG1_DMA_LEN8 (0x00c0) + +#define SEEQCFG1_MAC_MASK (0x3f00) /* Dis/enable bits for MAC addresses */ +#define SEEQCFG1_MAC0_EN (0x0100) +#define SEEQCFG1_MAC1_EN (0x0200) +#define SEEQCFG1_MAC2_EN (0x0400) +#define SEEQCFG1_MAC3_EN (0x0800) +#define SEEQCFG1_MAC4_EN (0x1000) +#define SEEQCFG1_MAC5_EN (0x2000) + +#define SEEQCFG1_MATCH_MASK (0xc000) /* Packet matching logic cfg bits */ +#define SEEQCFG1_MATCH_SPECIFIC (0x0000) /* only matching MAC addresses */ +#define SEEQCFG1_MATCH_BROAD (0x4000) /* matching and broadcast addresses */ +#define SEEQCFG1_MATCH_MULTI (0x8000) /* matching, broadcast and multicast */ +#define SEEQCFG1_MATCH_ALL (0xc000) /* Promiscuous mode */ + +#define SEEQCFG1_DEFAULT (SEEQCFG1_BUFFER_BUFFER | SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD) + +#define SEEQCFG2_BYTE_SWAP (0x0001) /* 0=Intel byte-order */ +#define SEEQCFG2_AUTO_REA (0x0002) /* if set, Receive End Area will be updated when reading from Buffer */ + +#define SEEQCFG2_CRC_ERR_EN (0x0008) /* enables receiving of packets with CRC errors */ +#define SEEQCFG2_DRIBBLE_EN (0x0010) /* enables receiving of non-aligned packets */ +#define SEEQCFG2_SHORT_EN (0x0020) /* enables receiving of short packets */ + +#define SEEQCFG2_SLOTSEL (0x0040) /* 0= standard IEEE802.3, 1= smaller,faster, non-standard */ +#define SEEQCFG2_NO_PREAM (0x0080) /* 1= user supplies Xmit preamble bytes */ +#define SEEQCFG2_ADDR_LEN (0x0100) /* 1= 2byte addresses */ +#define SEEQCFG2_REC_CRC (0x0200) /* 0= received packets will have CRC stripped from them */ +#define SEEQCFG2_XMIT_NO_CRC (0x0400) /* don't xmit CRC with each packet (user supplies it) */ +#define SEEQCFG2_LOOPBACK (0x0800) +#define SEEQCFG2_CTRLO (0x1000) +#define SEEQCFG2_RESET (0x8000) /* software Hard-reset bit */ + +struct seeq_pkt_hdr { + unsigned short next; /* address of next packet header */ + unsigned char babble_int:1, /* enable int on >1514 byte packet */ + coll_int:1, /* enable int on collision */ + coll_16_int:1, /* enable int on >15 collision */ + xmit_int:1, /* enable int on success (or xmit with <15 collision) */ + unused:1, + data_follows:1, /* if not set, process this as a header and pointer only */ + chain_cont:1, /* if set, more headers in chain only cmd bit valid in recv header */ + xmit_recv:1; /* if set, a xmit packet, else a receive packet.*/ + unsigned char status; +}; + +#define SEEQPKTH_BAB_INT_EN (0x01) /* xmit only */ +#define SEEQPKTH_COL_INT_EN (0x02) /* xmit only */ +#define SEEQPKTH_COL16_INT_EN (0x04) /* xmit only */ +#define SEEQPKTH_XMIT_INT_EN (0x08) /* xmit only */ +#define SEEQPKTH_DATA_FOLLOWS (0x20) /* supposedly in xmit only */ +#define SEEQPKTH_CHAIN (0x40) /* more headers follow */ +#define SEEQPKTH_XMIT (0x80) + +#define SEEQPKTS_BABBLE (0x0100) /* xmit only */ +#define SEEQPKTS_OVERSIZE (0x0100) /* recv only */ +#define SEEQPKTS_COLLISION (0x0200) /* xmit only */ +#define SEEQPKTS_CRC_ERR (0x0200) /* recv only */ +#define SEEQPKTS_COLL16 (0x0400) /* xmit only */ +#define SEEQPKTS_DRIB (0x0400) /* recv only */ +#define SEEQPKTS_SHORT (0x0800) /* recv only */ +#define SEEQPKTS_DONE (0x8000) +#define SEEQPKTS_ANY_ERROR (0x0f00) diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c new file mode 100644 index 000000000000..52fb7ed9f365 --- /dev/null +++ b/drivers/net/ethernet/seeq/sgiseeq.c @@ -0,0 +1,858 @@ +/* + * sgiseeq.c: Seeq8003 ethernet driver for SGI machines. + * + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + */ + +#undef DEBUG + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "sgiseeq.h" + +static char *sgiseeqstr = "SGI Seeq8003"; + +/* + * If you want speed, you do something silly, it always has worked for me. So, + * with that in mind, I've decided to make this driver look completely like a + * stupid Lance from a driver architecture perspective. Only difference is that + * here our "ring buffer" looks and acts like a real Lance one does but is + * laid out like how the HPC DMA and the Seeq want it to. You'd be surprised + * how a stupid idea like this can pay off in performance, not to mention + * making this driver 2,000 times easier to write. ;-) + */ + +/* Tune these if we tend to run out often etc. */ +#define SEEQ_RX_BUFFERS 16 +#define SEEQ_TX_BUFFERS 16 + +#define PKT_BUF_SZ 1584 + +#define NEXT_RX(i) (((i) + 1) & (SEEQ_RX_BUFFERS - 1)) +#define NEXT_TX(i) (((i) + 1) & (SEEQ_TX_BUFFERS - 1)) +#define PREV_RX(i) (((i) - 1) & (SEEQ_RX_BUFFERS - 1)) +#define PREV_TX(i) (((i) - 1) & (SEEQ_TX_BUFFERS - 1)) + +#define TX_BUFFS_AVAIL(sp) ((sp->tx_old <= sp->tx_new) ? \ + sp->tx_old + (SEEQ_TX_BUFFERS - 1) - sp->tx_new : \ + sp->tx_old - sp->tx_new - 1) + +#define VIRT_TO_DMA(sp, v) ((sp)->srings_dma + \ + (dma_addr_t)((unsigned long)(v) - \ + (unsigned long)((sp)->rx_desc))) + +/* Copy frames shorter than rx_copybreak, otherwise pass on up in + * a full sized sk_buff. Value of 100 stolen from tulip.c (!alpha). + */ +static int rx_copybreak = 100; + +#define PAD_SIZE (128 - sizeof(struct hpc_dma_desc) - sizeof(void *)) + +struct sgiseeq_rx_desc { + volatile struct hpc_dma_desc rdma; + u8 padding[PAD_SIZE]; + struct sk_buff *skb; +}; + +struct sgiseeq_tx_desc { + volatile struct hpc_dma_desc tdma; + u8 padding[PAD_SIZE]; + struct sk_buff *skb; +}; + +/* + * Warning: This structure is laid out in a certain way because HPC dma + * descriptors must be 8-byte aligned. So don't touch this without + * some care. + */ +struct sgiseeq_init_block { /* Note the name ;-) */ + struct sgiseeq_rx_desc rxvector[SEEQ_RX_BUFFERS]; + struct sgiseeq_tx_desc txvector[SEEQ_TX_BUFFERS]; +}; + +struct sgiseeq_private { + struct sgiseeq_init_block *srings; + dma_addr_t srings_dma; + + /* Ptrs to the descriptors in uncached space. */ + struct sgiseeq_rx_desc *rx_desc; + struct sgiseeq_tx_desc *tx_desc; + + char *name; + struct hpc3_ethregs *hregs; + struct sgiseeq_regs *sregs; + + /* Ring entry counters. */ + unsigned int rx_new, tx_new; + unsigned int rx_old, tx_old; + + int is_edlc; + unsigned char control; + unsigned char mode; + + spinlock_t tx_lock; +}; + +static inline void dma_sync_desc_cpu(struct net_device *dev, void *addr) +{ + dma_cache_sync(dev->dev.parent, addr, sizeof(struct sgiseeq_rx_desc), + DMA_FROM_DEVICE); +} + +static inline void dma_sync_desc_dev(struct net_device *dev, void *addr) +{ + dma_cache_sync(dev->dev.parent, addr, sizeof(struct sgiseeq_rx_desc), + DMA_TO_DEVICE); +} + +static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs) +{ + hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ; + udelay(20); + hregs->reset = 0; +} + +static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs, + struct sgiseeq_regs *sregs) +{ + hregs->rx_ctrl = hregs->tx_ctrl = 0; + hpc3_eth_reset(hregs); +} + +#define RSTAT_GO_BITS (SEEQ_RCMD_IGOOD | SEEQ_RCMD_IEOF | SEEQ_RCMD_ISHORT | \ + SEEQ_RCMD_IDRIB | SEEQ_RCMD_ICRC) + +static inline void seeq_go(struct sgiseeq_private *sp, + struct hpc3_ethregs *hregs, + struct sgiseeq_regs *sregs) +{ + sregs->rstat = sp->mode | RSTAT_GO_BITS; + hregs->rx_ctrl = HPC3_ERXCTRL_ACTIVE; +} + +static inline void __sgiseeq_set_mac_address(struct net_device *dev) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + struct sgiseeq_regs *sregs = sp->sregs; + int i; + + sregs->tstat = SEEQ_TCMD_RB0; + for (i = 0; i < 6; i++) + sregs->rw.eth_addr[i] = dev->dev_addr[i]; +} + +static int sgiseeq_set_mac_address(struct net_device *dev, void *addr) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + struct sockaddr *sa = addr; + + memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); + + spin_lock_irq(&sp->tx_lock); + __sgiseeq_set_mac_address(dev); + spin_unlock_irq(&sp->tx_lock); + + return 0; +} + +#define TCNTINFO_INIT (HPCDMA_EOX | HPCDMA_ETXD) +#define RCNTCFG_INIT (HPCDMA_OWN | HPCDMA_EORP | HPCDMA_XIE) +#define RCNTINFO_INIT (RCNTCFG_INIT | (PKT_BUF_SZ & HPCDMA_BCNT)) + +static int seeq_init_ring(struct net_device *dev) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + int i; + + netif_stop_queue(dev); + sp->rx_new = sp->tx_new = 0; + sp->rx_old = sp->tx_old = 0; + + __sgiseeq_set_mac_address(dev); + + /* Setup tx ring. */ + for(i = 0; i < SEEQ_TX_BUFFERS; i++) { + sp->tx_desc[i].tdma.cntinfo = TCNTINFO_INIT; + dma_sync_desc_dev(dev, &sp->tx_desc[i]); + } + + /* And now the rx ring. */ + for (i = 0; i < SEEQ_RX_BUFFERS; i++) { + if (!sp->rx_desc[i].skb) { + dma_addr_t dma_addr; + struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ); + + if (skb == NULL) + return -ENOMEM; + skb_reserve(skb, 2); + dma_addr = dma_map_single(dev->dev.parent, + skb->data - 2, + PKT_BUF_SZ, DMA_FROM_DEVICE); + sp->rx_desc[i].skb = skb; + sp->rx_desc[i].rdma.pbuf = dma_addr; + } + sp->rx_desc[i].rdma.cntinfo = RCNTINFO_INIT; + dma_sync_desc_dev(dev, &sp->rx_desc[i]); + } + sp->rx_desc[i - 1].rdma.cntinfo |= HPCDMA_EOR; + dma_sync_desc_dev(dev, &sp->rx_desc[i - 1]); + return 0; +} + +static void seeq_purge_ring(struct net_device *dev) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + int i; + + /* clear tx ring. */ + for (i = 0; i < SEEQ_TX_BUFFERS; i++) { + if (sp->tx_desc[i].skb) { + dev_kfree_skb(sp->tx_desc[i].skb); + sp->tx_desc[i].skb = NULL; + } + } + + /* And now the rx ring. */ + for (i = 0; i < SEEQ_RX_BUFFERS; i++) { + if (sp->rx_desc[i].skb) { + dev_kfree_skb(sp->rx_desc[i].skb); + sp->rx_desc[i].skb = NULL; + } + } +} + +#ifdef DEBUG +static struct sgiseeq_private *gpriv; +static struct net_device *gdev; + +static void sgiseeq_dump_rings(void) +{ + static int once; + struct sgiseeq_rx_desc *r = gpriv->rx_desc; + struct sgiseeq_tx_desc *t = gpriv->tx_desc; + struct hpc3_ethregs *hregs = gpriv->hregs; + int i; + + if (once) + return; + once++; + printk("RING DUMP:\n"); + for (i = 0; i < SEEQ_RX_BUFFERS; i++) { + printk("RX [%d]: @(%p) [%08x,%08x,%08x] ", + i, (&r[i]), r[i].rdma.pbuf, r[i].rdma.cntinfo, + r[i].rdma.pnext); + i += 1; + printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n", + i, (&r[i]), r[i].rdma.pbuf, r[i].rdma.cntinfo, + r[i].rdma.pnext); + } + for (i = 0; i < SEEQ_TX_BUFFERS; i++) { + printk("TX [%d]: @(%p) [%08x,%08x,%08x] ", + i, (&t[i]), t[i].tdma.pbuf, t[i].tdma.cntinfo, + t[i].tdma.pnext); + i += 1; + printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n", + i, (&t[i]), t[i].tdma.pbuf, t[i].tdma.cntinfo, + t[i].tdma.pnext); + } + printk("INFO: [rx_new = %d rx_old=%d] [tx_new = %d tx_old = %d]\n", + gpriv->rx_new, gpriv->rx_old, gpriv->tx_new, gpriv->tx_old); + printk("RREGS: rx_cbptr[%08x] rx_ndptr[%08x] rx_ctrl[%08x]\n", + hregs->rx_cbptr, hregs->rx_ndptr, hregs->rx_ctrl); + printk("TREGS: tx_cbptr[%08x] tx_ndptr[%08x] tx_ctrl[%08x]\n", + hregs->tx_cbptr, hregs->tx_ndptr, hregs->tx_ctrl); +} +#endif + +#define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF) +#define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2) + +static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp, + struct sgiseeq_regs *sregs) +{ + struct hpc3_ethregs *hregs = sp->hregs; + int err; + + reset_hpc3_and_seeq(hregs, sregs); + err = seeq_init_ring(dev); + if (err) + return err; + + /* Setup to field the proper interrupt types. */ + if (sp->is_edlc) { + sregs->tstat = TSTAT_INIT_EDLC; + sregs->rw.wregs.control = sp->control; + sregs->rw.wregs.frame_gap = 0; + } else { + sregs->tstat = TSTAT_INIT_SEEQ; + } + + hregs->rx_ndptr = VIRT_TO_DMA(sp, sp->rx_desc); + hregs->tx_ndptr = VIRT_TO_DMA(sp, sp->tx_desc); + + seeq_go(sp, hregs, sregs); + return 0; +} + +static void record_rx_errors(struct net_device *dev, unsigned char status) +{ + if (status & SEEQ_RSTAT_OVERF || + status & SEEQ_RSTAT_SFRAME) + dev->stats.rx_over_errors++; + if (status & SEEQ_RSTAT_CERROR) + dev->stats.rx_crc_errors++; + if (status & SEEQ_RSTAT_DERROR) + dev->stats.rx_frame_errors++; + if (status & SEEQ_RSTAT_REOF) + dev->stats.rx_errors++; +} + +static inline void rx_maybe_restart(struct sgiseeq_private *sp, + struct hpc3_ethregs *hregs, + struct sgiseeq_regs *sregs) +{ + if (!(hregs->rx_ctrl & HPC3_ERXCTRL_ACTIVE)) { + hregs->rx_ndptr = VIRT_TO_DMA(sp, sp->rx_desc + sp->rx_new); + seeq_go(sp, hregs, sregs); + } +} + +static inline void sgiseeq_rx(struct net_device *dev, struct sgiseeq_private *sp, + struct hpc3_ethregs *hregs, + struct sgiseeq_regs *sregs) +{ + struct sgiseeq_rx_desc *rd; + struct sk_buff *skb = NULL; + struct sk_buff *newskb; + unsigned char pkt_status; + int len = 0; + unsigned int orig_end = PREV_RX(sp->rx_new); + + /* Service every received packet. */ + rd = &sp->rx_desc[sp->rx_new]; + dma_sync_desc_cpu(dev, rd); + while (!(rd->rdma.cntinfo & HPCDMA_OWN)) { + len = PKT_BUF_SZ - (rd->rdma.cntinfo & HPCDMA_BCNT) - 3; + dma_unmap_single(dev->dev.parent, rd->rdma.pbuf, + PKT_BUF_SZ, DMA_FROM_DEVICE); + pkt_status = rd->skb->data[len]; + if (pkt_status & SEEQ_RSTAT_FIG) { + /* Packet is OK. */ + /* We don't want to receive our own packets */ + if (memcmp(rd->skb->data + 6, dev->dev_addr, ETH_ALEN)) { + if (len > rx_copybreak) { + skb = rd->skb; + newskb = netdev_alloc_skb(dev, PKT_BUF_SZ); + if (!newskb) { + newskb = skb; + skb = NULL; + goto memory_squeeze; + } + skb_reserve(newskb, 2); + } else { + skb = netdev_alloc_skb_ip_align(dev, len); + if (skb) + skb_copy_to_linear_data(skb, rd->skb->data, len); + + newskb = rd->skb; + } +memory_squeeze: + if (skb) { + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += len; + } else { + printk(KERN_NOTICE "%s: Memory squeeze, deferring packet.\n", + dev->name); + dev->stats.rx_dropped++; + } + } else { + /* Silently drop my own packets */ + newskb = rd->skb; + } + } else { + record_rx_errors(dev, pkt_status); + newskb = rd->skb; + } + rd->skb = newskb; + rd->rdma.pbuf = dma_map_single(dev->dev.parent, + newskb->data - 2, + PKT_BUF_SZ, DMA_FROM_DEVICE); + + /* Return the entry to the ring pool. */ + rd->rdma.cntinfo = RCNTINFO_INIT; + sp->rx_new = NEXT_RX(sp->rx_new); + dma_sync_desc_dev(dev, rd); + rd = &sp->rx_desc[sp->rx_new]; + dma_sync_desc_cpu(dev, rd); + } + dma_sync_desc_cpu(dev, &sp->rx_desc[orig_end]); + sp->rx_desc[orig_end].rdma.cntinfo &= ~(HPCDMA_EOR); + dma_sync_desc_dev(dev, &sp->rx_desc[orig_end]); + dma_sync_desc_cpu(dev, &sp->rx_desc[PREV_RX(sp->rx_new)]); + sp->rx_desc[PREV_RX(sp->rx_new)].rdma.cntinfo |= HPCDMA_EOR; + dma_sync_desc_dev(dev, &sp->rx_desc[PREV_RX(sp->rx_new)]); + rx_maybe_restart(sp, hregs, sregs); +} + +static inline void tx_maybe_reset_collisions(struct sgiseeq_private *sp, + struct sgiseeq_regs *sregs) +{ + if (sp->is_edlc) { + sregs->rw.wregs.control = sp->control & ~(SEEQ_CTRL_XCNT); + sregs->rw.wregs.control = sp->control; + } +} + +static inline void kick_tx(struct net_device *dev, + struct sgiseeq_private *sp, + struct hpc3_ethregs *hregs) +{ + struct sgiseeq_tx_desc *td; + int i = sp->tx_old; + + /* If the HPC aint doin nothin, and there are more packets + * with ETXD cleared and XIU set we must make very certain + * that we restart the HPC else we risk locking up the + * adapter. The following code is only safe iff the HPCDMA + * is not active! + */ + td = &sp->tx_desc[i]; + dma_sync_desc_cpu(dev, td); + while ((td->tdma.cntinfo & (HPCDMA_XIU | HPCDMA_ETXD)) == + (HPCDMA_XIU | HPCDMA_ETXD)) { + i = NEXT_TX(i); + td = &sp->tx_desc[i]; + dma_sync_desc_cpu(dev, td); + } + if (td->tdma.cntinfo & HPCDMA_XIU) { + hregs->tx_ndptr = VIRT_TO_DMA(sp, td); + hregs->tx_ctrl = HPC3_ETXCTRL_ACTIVE; + } +} + +static inline void sgiseeq_tx(struct net_device *dev, struct sgiseeq_private *sp, + struct hpc3_ethregs *hregs, + struct sgiseeq_regs *sregs) +{ + struct sgiseeq_tx_desc *td; + unsigned long status = hregs->tx_ctrl; + int j; + + tx_maybe_reset_collisions(sp, sregs); + + if (!(status & (HPC3_ETXCTRL_ACTIVE | SEEQ_TSTAT_PTRANS))) { + /* Oops, HPC detected some sort of error. */ + if (status & SEEQ_TSTAT_R16) + dev->stats.tx_aborted_errors++; + if (status & SEEQ_TSTAT_UFLOW) + dev->stats.tx_fifo_errors++; + if (status & SEEQ_TSTAT_LCLS) + dev->stats.collisions++; + } + + /* Ack 'em... */ + for (j = sp->tx_old; j != sp->tx_new; j = NEXT_TX(j)) { + td = &sp->tx_desc[j]; + + dma_sync_desc_cpu(dev, td); + if (!(td->tdma.cntinfo & (HPCDMA_XIU))) + break; + if (!(td->tdma.cntinfo & (HPCDMA_ETXD))) { + if (!(status & HPC3_ETXCTRL_ACTIVE)) { + hregs->tx_ndptr = VIRT_TO_DMA(sp, td); + hregs->tx_ctrl = HPC3_ETXCTRL_ACTIVE; + } + break; + } + dev->stats.tx_packets++; + sp->tx_old = NEXT_TX(sp->tx_old); + td->tdma.cntinfo &= ~(HPCDMA_XIU | HPCDMA_XIE); + td->tdma.cntinfo |= HPCDMA_EOX; + if (td->skb) { + dev_kfree_skb_any(td->skb); + td->skb = NULL; + } + dma_sync_desc_dev(dev, td); + } +} + +static irqreturn_t sgiseeq_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *) dev_id; + struct sgiseeq_private *sp = netdev_priv(dev); + struct hpc3_ethregs *hregs = sp->hregs; + struct sgiseeq_regs *sregs = sp->sregs; + + spin_lock(&sp->tx_lock); + + /* Ack the IRQ and set software state. */ + hregs->reset = HPC3_ERST_CLRIRQ; + + /* Always check for received packets. */ + sgiseeq_rx(dev, sp, hregs, sregs); + + /* Only check for tx acks if we have something queued. */ + if (sp->tx_old != sp->tx_new) + sgiseeq_tx(dev, sp, hregs, sregs); + + if ((TX_BUFFS_AVAIL(sp) > 0) && netif_queue_stopped(dev)) { + netif_wake_queue(dev); + } + spin_unlock(&sp->tx_lock); + + return IRQ_HANDLED; +} + +static int sgiseeq_open(struct net_device *dev) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + struct sgiseeq_regs *sregs = sp->sregs; + unsigned int irq = dev->irq; + int err; + + if (request_irq(irq, sgiseeq_interrupt, 0, sgiseeqstr, dev)) { + printk(KERN_ERR "Seeq8003: Can't get irq %d\n", dev->irq); + return -EAGAIN; + } + + err = init_seeq(dev, sp, sregs); + if (err) + goto out_free_irq; + + netif_start_queue(dev); + + return 0; + +out_free_irq: + free_irq(irq, dev); + + return err; +} + +static int sgiseeq_close(struct net_device *dev) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + struct sgiseeq_regs *sregs = sp->sregs; + unsigned int irq = dev->irq; + + netif_stop_queue(dev); + + /* Shutdown the Seeq. */ + reset_hpc3_and_seeq(sp->hregs, sregs); + free_irq(irq, dev); + seeq_purge_ring(dev); + + return 0; +} + +static inline int sgiseeq_reset(struct net_device *dev) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + struct sgiseeq_regs *sregs = sp->sregs; + int err; + + err = init_seeq(dev, sp, sregs); + if (err) + return err; + + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); + + return 0; +} + +static int sgiseeq_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + struct hpc3_ethregs *hregs = sp->hregs; + unsigned long flags; + struct sgiseeq_tx_desc *td; + int len, entry; + + spin_lock_irqsave(&sp->tx_lock, flags); + + /* Setup... */ + len = skb->len; + if (len < ETH_ZLEN) { + if (skb_padto(skb, ETH_ZLEN)) { + spin_unlock_irqrestore(&sp->tx_lock, flags); + return NETDEV_TX_OK; + } + len = ETH_ZLEN; + } + + dev->stats.tx_bytes += len; + entry = sp->tx_new; + td = &sp->tx_desc[entry]; + dma_sync_desc_cpu(dev, td); + + /* Create entry. There are so many races with adding a new + * descriptor to the chain: + * 1) Assume that the HPC is off processing a DMA chain while + * we are changing all of the following. + * 2) Do no allow the HPC to look at a new descriptor until + * we have completely set up it's state. This means, do + * not clear HPCDMA_EOX in the current last descritptor + * until the one we are adding looks consistent and could + * be processes right now. + * 3) The tx interrupt code must notice when we've added a new + * entry and the HPC got to the end of the chain before we + * added this new entry and restarted it. + */ + td->skb = skb; + td->tdma.pbuf = dma_map_single(dev->dev.parent, skb->data, + len, DMA_TO_DEVICE); + td->tdma.cntinfo = (len & HPCDMA_BCNT) | + HPCDMA_XIU | HPCDMA_EOXP | HPCDMA_XIE | HPCDMA_EOX; + dma_sync_desc_dev(dev, td); + if (sp->tx_old != sp->tx_new) { + struct sgiseeq_tx_desc *backend; + + backend = &sp->tx_desc[PREV_TX(sp->tx_new)]; + dma_sync_desc_cpu(dev, backend); + backend->tdma.cntinfo &= ~HPCDMA_EOX; + dma_sync_desc_dev(dev, backend); + } + sp->tx_new = NEXT_TX(sp->tx_new); /* Advance. */ + + /* Maybe kick the HPC back into motion. */ + if (!(hregs->tx_ctrl & HPC3_ETXCTRL_ACTIVE)) + kick_tx(dev, sp, hregs); + + if (!TX_BUFFS_AVAIL(sp)) + netif_stop_queue(dev); + spin_unlock_irqrestore(&sp->tx_lock, flags); + + return NETDEV_TX_OK; +} + +static void timeout(struct net_device *dev) +{ + printk(KERN_NOTICE "%s: transmit timed out, resetting\n", dev->name); + sgiseeq_reset(dev); + + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); +} + +static void sgiseeq_set_multicast(struct net_device *dev) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + unsigned char oldmode = sp->mode; + + if(dev->flags & IFF_PROMISC) + sp->mode = SEEQ_RCMD_RANY; + else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) + sp->mode = SEEQ_RCMD_RBMCAST; + else + sp->mode = SEEQ_RCMD_RBCAST; + + /* XXX I know this sucks, but is there a better way to reprogram + * XXX the receiver? At least, this shouldn't happen too often. + */ + + if (oldmode != sp->mode) + sgiseeq_reset(dev); +} + +static inline void setup_tx_ring(struct net_device *dev, + struct sgiseeq_tx_desc *buf, + int nbufs) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + int i = 0; + + while (i < (nbufs - 1)) { + buf[i].tdma.pnext = VIRT_TO_DMA(sp, buf + i + 1); + buf[i].tdma.pbuf = 0; + dma_sync_desc_dev(dev, &buf[i]); + i++; + } + buf[i].tdma.pnext = VIRT_TO_DMA(sp, buf); + dma_sync_desc_dev(dev, &buf[i]); +} + +static inline void setup_rx_ring(struct net_device *dev, + struct sgiseeq_rx_desc *buf, + int nbufs) +{ + struct sgiseeq_private *sp = netdev_priv(dev); + int i = 0; + + while (i < (nbufs - 1)) { + buf[i].rdma.pnext = VIRT_TO_DMA(sp, buf + i + 1); + buf[i].rdma.pbuf = 0; + dma_sync_desc_dev(dev, &buf[i]); + i++; + } + buf[i].rdma.pbuf = 0; + buf[i].rdma.pnext = VIRT_TO_DMA(sp, buf); + dma_sync_desc_dev(dev, &buf[i]); +} + +static const struct net_device_ops sgiseeq_netdev_ops = { + .ndo_open = sgiseeq_open, + .ndo_stop = sgiseeq_close, + .ndo_start_xmit = sgiseeq_start_xmit, + .ndo_tx_timeout = timeout, + .ndo_set_multicast_list = sgiseeq_set_multicast, + .ndo_set_mac_address = sgiseeq_set_mac_address, + .ndo_change_mtu = eth_change_mtu, + .ndo_validate_addr = eth_validate_addr, +}; + +static int __devinit sgiseeq_probe(struct platform_device *pdev) +{ + struct sgiseeq_platform_data *pd = pdev->dev.platform_data; + struct hpc3_regs *hpcregs = pd->hpc; + struct sgiseeq_init_block *sr; + unsigned int irq = pd->irq; + struct sgiseeq_private *sp; + struct net_device *dev; + int err; + + dev = alloc_etherdev(sizeof (struct sgiseeq_private)); + if (!dev) { + printk(KERN_ERR "Sgiseeq: Etherdev alloc failed, aborting.\n"); + err = -ENOMEM; + goto err_out; + } + + platform_set_drvdata(pdev, dev); + sp = netdev_priv(dev); + + /* Make private data page aligned */ + sr = dma_alloc_noncoherent(&pdev->dev, sizeof(*sp->srings), + &sp->srings_dma, GFP_KERNEL); + if (!sr) { + printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n"); + err = -ENOMEM; + goto err_out_free_dev; + } + sp->srings = sr; + sp->rx_desc = sp->srings->rxvector; + sp->tx_desc = sp->srings->txvector; + + /* A couple calculations now, saves many cycles later. */ + setup_rx_ring(dev, sp->rx_desc, SEEQ_RX_BUFFERS); + setup_tx_ring(dev, sp->tx_desc, SEEQ_TX_BUFFERS); + + memcpy(dev->dev_addr, pd->mac, ETH_ALEN); + +#ifdef DEBUG + gpriv = sp; + gdev = dev; +#endif + sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0]; + sp->hregs = &hpcregs->ethregs; + sp->name = sgiseeqstr; + sp->mode = SEEQ_RCMD_RBCAST; + + /* Setup PIO and DMA transfer timing */ + sp->hregs->pconfig = 0x161; + sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | + HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; + + /* Setup PIO and DMA transfer timing */ + sp->hregs->pconfig = 0x161; + sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | + HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; + + /* Reset the chip. */ + hpc3_eth_reset(sp->hregs); + + sp->is_edlc = !(sp->sregs->rw.rregs.collision_tx[0] & 0xff); + if (sp->is_edlc) + sp->control = SEEQ_CTRL_XCNT | SEEQ_CTRL_ACCNT | + SEEQ_CTRL_SFLAG | SEEQ_CTRL_ESHORT | + SEEQ_CTRL_ENCARR; + + dev->netdev_ops = &sgiseeq_netdev_ops; + dev->watchdog_timeo = (200 * HZ) / 1000; + dev->irq = irq; + + if (register_netdev(dev)) { + printk(KERN_ERR "Sgiseeq: Cannot register net device, " + "aborting.\n"); + err = -ENODEV; + goto err_out_free_page; + } + + printk(KERN_INFO "%s: %s %pM\n", dev->name, sgiseeqstr, dev->dev_addr); + + return 0; + +err_out_free_page: + free_page((unsigned long) sp->srings); +err_out_free_dev: + free_netdev(dev); + +err_out: + return err; +} + +static int __exit sgiseeq_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sgiseeq_private *sp = netdev_priv(dev); + + unregister_netdev(dev); + dma_free_noncoherent(&pdev->dev, sizeof(*sp->srings), sp->srings, + sp->srings_dma); + free_netdev(dev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static struct platform_driver sgiseeq_driver = { + .probe = sgiseeq_probe, + .remove = __exit_p(sgiseeq_remove), + .driver = { + .name = "sgiseeq", + .owner = THIS_MODULE, + } +}; + +static int __init sgiseeq_module_init(void) +{ + if (platform_driver_register(&sgiseeq_driver)) { + printk(KERN_ERR "Driver registration failed\n"); + return -ENODEV; + } + + return 0; +} + +static void __exit sgiseeq_module_exit(void) +{ + platform_driver_unregister(&sgiseeq_driver); +} + +module_init(sgiseeq_module_init); +module_exit(sgiseeq_module_exit); + +MODULE_DESCRIPTION("SGI Seeq 8003 driver"); +MODULE_AUTHOR("Linux/MIPS Mailing List "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:sgiseeq"); diff --git a/drivers/net/ethernet/seeq/sgiseeq.h b/drivers/net/ethernet/seeq/sgiseeq.h new file mode 100644 index 000000000000..2211e2987a8d --- /dev/null +++ b/drivers/net/ethernet/seeq/sgiseeq.h @@ -0,0 +1,103 @@ +/* + * sgiseeq.h: Defines for the Seeq8003 ethernet controller. + * + * Copyright (C) 1996 David S. Miller (davem@davemloft.net) + */ +#ifndef _SGISEEQ_H +#define _SGISEEQ_H + +struct sgiseeq_wregs { + volatile unsigned int multicase_high[2]; + volatile unsigned int frame_gap; + volatile unsigned int control; +}; + +struct sgiseeq_rregs { + volatile unsigned int collision_tx[2]; + volatile unsigned int collision_all[2]; + volatile unsigned int _unused0; + volatile unsigned int rflags; +}; + +struct sgiseeq_regs { + union { + volatile unsigned int eth_addr[6]; + volatile unsigned int multicast_low[6]; + struct sgiseeq_wregs wregs; + struct sgiseeq_rregs rregs; + } rw; + volatile unsigned int rstat; + volatile unsigned int tstat; +}; + +/* Seeq8003 receive status register */ +#define SEEQ_RSTAT_OVERF 0x001 /* Overflow */ +#define SEEQ_RSTAT_CERROR 0x002 /* CRC error */ +#define SEEQ_RSTAT_DERROR 0x004 /* Dribble error */ +#define SEEQ_RSTAT_SFRAME 0x008 /* Short frame */ +#define SEEQ_RSTAT_REOF 0x010 /* Received end of frame */ +#define SEEQ_RSTAT_FIG 0x020 /* Frame is good */ +#define SEEQ_RSTAT_TIMEO 0x040 /* Timeout, or late receive */ +#define SEEQ_RSTAT_WHICH 0x080 /* Which status, 1=old 0=new */ +#define SEEQ_RSTAT_LITTLE 0x100 /* DMA is done in little endian format */ +#define SEEQ_RSTAT_SDMA 0x200 /* DMA has started */ +#define SEEQ_RSTAT_ADMA 0x400 /* DMA is active */ +#define SEEQ_RSTAT_ROVERF 0x800 /* Receive buffer overflow */ + +/* Seeq8003 receive command register */ +#define SEEQ_RCMD_RDISAB 0x000 /* Disable receiver on the Seeq8003 */ +#define SEEQ_RCMD_IOVERF 0x001 /* IRQ on buffer overflows */ +#define SEEQ_RCMD_ICRC 0x002 /* IRQ on CRC errors */ +#define SEEQ_RCMD_IDRIB 0x004 /* IRQ on dribble errors */ +#define SEEQ_RCMD_ISHORT 0x008 /* IRQ on short frames */ +#define SEEQ_RCMD_IEOF 0x010 /* IRQ on end of frame */ +#define SEEQ_RCMD_IGOOD 0x020 /* IRQ on good frames */ +#define SEEQ_RCMD_RANY 0x040 /* Receive any frame */ +#define SEEQ_RCMD_RBCAST 0x080 /* Receive broadcasts */ +#define SEEQ_RCMD_RBMCAST 0x0c0 /* Receive broadcasts/multicasts */ + +/* Seeq8003 transmit status register */ +#define SEEQ_TSTAT_UFLOW 0x001 /* Transmit buffer underflow */ +#define SEEQ_TSTAT_CLS 0x002 /* Collision detected */ +#define SEEQ_TSTAT_R16 0x004 /* Did 16 retries to tx a frame */ +#define SEEQ_TSTAT_PTRANS 0x008 /* Packet was transmitted ok */ +#define SEEQ_TSTAT_LCLS 0x010 /* Late collision occurred */ +#define SEEQ_TSTAT_WHICH 0x080 /* Which status, 1=old 0=new */ +#define SEEQ_TSTAT_TLE 0x100 /* DMA is done in little endian format */ +#define SEEQ_TSTAT_SDMA 0x200 /* DMA has started */ +#define SEEQ_TSTAT_ADMA 0x400 /* DMA is active */ + +/* Seeq8003 transmit command register */ +#define SEEQ_TCMD_RB0 0x00 /* Register bank zero w/station addr */ +#define SEEQ_TCMD_IUF 0x01 /* IRQ on tx underflow */ +#define SEEQ_TCMD_IC 0x02 /* IRQ on collisions */ +#define SEEQ_TCMD_I16 0x04 /* IRQ after 16 failed attempts to tx frame */ +#define SEEQ_TCMD_IPT 0x08 /* IRQ when packet successfully transmitted */ +#define SEEQ_TCMD_RB1 0x20 /* Register bank one w/multi-cast low byte */ +#define SEEQ_TCMD_RB2 0x40 /* Register bank two w/multi-cast high byte */ + +/* Seeq8003 control register */ +#define SEEQ_CTRL_XCNT 0x01 +#define SEEQ_CTRL_ACCNT 0x02 +#define SEEQ_CTRL_SFLAG 0x04 +#define SEEQ_CTRL_EMULTI 0x08 +#define SEEQ_CTRL_ESHORT 0x10 +#define SEEQ_CTRL_ENCARR 0x20 + +/* Seeq8003 control registers on the SGI Hollywood HPC. */ +#define SEEQ_HPIO_P1BITS 0x00000001 /* cycles to stay in P1 phase for PIO */ +#define SEEQ_HPIO_P2BITS 0x00000060 /* cycles to stay in P2 phase for PIO */ +#define SEEQ_HPIO_P3BITS 0x00000100 /* cycles to stay in P3 phase for PIO */ +#define SEEQ_HDMA_D1BITS 0x00000006 /* cycles to stay in D1 phase for DMA */ +#define SEEQ_HDMA_D2BITS 0x00000020 /* cycles to stay in D2 phase for DMA */ +#define SEEQ_HDMA_D3BITS 0x00000000 /* cycles to stay in D3 phase for DMA */ +#define SEEQ_HDMA_TIMEO 0x00030000 /* cycles for DMA timeout */ +#define SEEQ_HCTL_NORM 0x00000000 /* Normal operation mode */ +#define SEEQ_HCTL_RESET 0x00000001 /* Reset Seeq8003 and HPC interface */ +#define SEEQ_HCTL_IPEND 0x00000002 /* IRQ is pending for the chip */ +#define SEEQ_HCTL_IPG 0x00001000 /* Inter-packet gap */ +#define SEEQ_HCTL_RFIX 0x00002000 /* At rxdc, clear end-of-packet */ +#define SEEQ_HCTL_EFIX 0x00004000 /* fixes intr status bit settings */ +#define SEEQ_HCTL_IFIX 0x00008000 /* enable startup timeouts */ + +#endif /* !(_SGISEEQ_H) */ diff --git a/drivers/net/seeq8005.c b/drivers/net/seeq8005.c deleted file mode 100644 index d2fce98f557f..000000000000 --- a/drivers/net/seeq8005.c +++ /dev/null @@ -1,752 +0,0 @@ -/* seeq8005.c: A network driver for linux. */ -/* - Based on skeleton.c, - Written 1993-94 by Donald Becker. - See the skeleton.c file for further copyright information. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as hamish@zot.apana.org.au - - This file is a network device driver for the SEEQ 8005 chipset and - the Linux operating system. - -*/ - -static const char version[] = - "seeq8005.c:v1.00 8/07/95 Hamish Coleman (hamish@zot.apana.org.au)\n"; - -/* - Sources: - SEEQ 8005 databook - - Version history: - 1.00 Public release. cosmetic changes (no warnings now) - 0.68 Turning per- packet,interrupt debug messages off - testing for release. - 0.67 timing problems/bad buffer reads seem to be fixed now - 0.63 *!@$ protocol=eth_type_trans -- now packets flow - 0.56 Send working - 0.48 Receive working -*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "seeq8005.h" - -/* First, a few definitions that the brave might change. */ -/* A zero-terminated list of I/O addresses to be probed. */ -static unsigned int seeq8005_portlist[] __initdata = - { 0x300, 0x320, 0x340, 0x360, 0}; - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; - -/* Information that need to be kept for each board. */ -struct net_local { - unsigned short receive_ptr; /* What address in packet memory do we expect a recv_pkt_header? */ - long open_time; /* Useless example local info. */ -}; - -/* The station (ethernet) address prefix, used for IDing the board. */ -#define SA_ADDR0 0x00 -#define SA_ADDR1 0x80 -#define SA_ADDR2 0x4b - -/* Index to functions, as function prototypes. */ - -static int seeq8005_probe1(struct net_device *dev, int ioaddr); -static int seeq8005_open(struct net_device *dev); -static void seeq8005_timeout(struct net_device *dev); -static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t seeq8005_interrupt(int irq, void *dev_id); -static void seeq8005_rx(struct net_device *dev); -static int seeq8005_close(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); - -/* Example routines you must write ;->. */ -#define tx_done(dev) (inw(SEEQ_STATUS) & SEEQSTAT_TX_ON) -static void hardware_send_packet(struct net_device *dev, char *buf, int length); -extern void seeq8005_init(struct net_device *dev, int startp); -static inline void wait_for_buffer(struct net_device *dev); - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - */ - -static int io = 0x320; -static int irq = 10; - -struct net_device * __init seeq8005_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - } - - if (io > 0x1ff) { /* Check a single specified location. */ - err = seeq8005_probe1(dev, io); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = seeq8005_portlist; *port; port++) { - if (seeq8005_probe1(dev, *port) == 0) - break; - } - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - release_region(dev->base_addr, SEEQ8005_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops seeq8005_netdev_ops = { - .ndo_open = seeq8005_open, - .ndo_stop = seeq8005_close, - .ndo_start_xmit = seeq8005_send_packet, - .ndo_tx_timeout = seeq8005_timeout, - .ndo_set_multicast_list = set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -/* This is the real probe routine. Linux has a history of friendly device - probes on the ISA bus. A good device probes avoids doing writes, and - verifies that the correct device exists and functions. */ - -static int __init seeq8005_probe1(struct net_device *dev, int ioaddr) -{ - static unsigned version_printed; - int i,j; - unsigned char SA_prom[32]; - int old_cfg1; - int old_cfg2; - int old_stat; - int old_dmaar; - int old_rear; - int retval; - - if (!request_region(ioaddr, SEEQ8005_IO_EXTENT, "seeq8005")) - return -ENODEV; - - if (net_debug>1) - printk("seeq8005: probing at 0x%x\n",ioaddr); - - old_stat = inw(SEEQ_STATUS); /* read status register */ - if (old_stat == 0xffff) { - retval = -ENODEV; - goto out; /* assume that 0xffff == no device */ - } - if ( (old_stat & 0x1800) != 0x1800 ) { /* assume that unused bits are 1, as my manual says */ - if (net_debug>1) { - printk("seeq8005: reserved stat bits != 0x1800\n"); - printk(" == 0x%04x\n",old_stat); - } - retval = -ENODEV; - goto out; - } - - old_rear = inw(SEEQ_REA); - if (old_rear == 0xffff) { - outw(0,SEEQ_REA); - if (inw(SEEQ_REA) == 0xffff) { /* assume that 0xffff == no device */ - retval = -ENODEV; - goto out; - } - } else if ((old_rear & 0xff00) != 0xff00) { /* assume that unused bits are 1 */ - if (net_debug>1) { - printk("seeq8005: unused rear bits != 0xff00\n"); - printk(" == 0x%04x\n",old_rear); - } - retval = -ENODEV; - goto out; - } - - old_cfg2 = inw(SEEQ_CFG2); /* read CFG2 register */ - old_cfg1 = inw(SEEQ_CFG1); - old_dmaar = inw(SEEQ_DMAAR); - - if (net_debug>4) { - printk("seeq8005: stat = 0x%04x\n",old_stat); - printk("seeq8005: cfg1 = 0x%04x\n",old_cfg1); - printk("seeq8005: cfg2 = 0x%04x\n",old_cfg2); - printk("seeq8005: raer = 0x%04x\n",old_rear); - printk("seeq8005: dmaar= 0x%04x\n",old_dmaar); - } - - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); /* setup for reading PROM */ - outw( 0, SEEQ_DMAAR); /* set starting PROM address */ - outw( SEEQCFG1_BUFFER_PROM, SEEQ_CFG1); /* set buffer to look at PROM */ - - - j=0; - for(i=0; i <32; i++) { - j+= SA_prom[i] = inw(SEEQ_BUFFER) & 0xff; - } - -#if 0 - /* untested because I only have the one card */ - if ( (j&0xff) != 0 ) { /* checksum appears to be 8bit = 0 */ - if (net_debug>1) { /* check this before deciding that we have a card */ - printk("seeq8005: prom sum error\n"); - } - outw( old_stat, SEEQ_STATUS); - outw( old_dmaar, SEEQ_DMAAR); - outw( old_cfg1, SEEQ_CFG1); - retval = -ENODEV; - goto out; - } -#endif - - outw( SEEQCFG2_RESET, SEEQ_CFG2); /* reset the card */ - udelay(5); - outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - - if (net_debug) { - printk("seeq8005: prom sum = 0x%08x\n",j); - for(j=0; j<32; j+=16) { - printk("seeq8005: prom %02x: ",j); - for(i=0;i<16;i++) { - printk("%02x ",SA_prom[j|i]); - } - printk(" "); - for(i=0;i<16;i++) { - if ((SA_prom[j|i]>31)&&(SA_prom[j|i]<127)) { - printk("%c", SA_prom[j|i]); - } else { - printk(" "); - } - } - printk("\n"); - } - } - -#if 0 - /* - * testing the packet buffer memory doesn't work yet - * but all other buffer accesses do - * - fixing is not a priority - */ - if (net_debug>1) { /* test packet buffer memory */ - printk("seeq8005: testing packet buffer ... "); - outw( SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1); - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - outw( 0 , SEEQ_DMAAR); - for(i=0;i<32768;i++) { - outw(0x5a5a, SEEQ_BUFFER); - } - j=jiffies+HZ; - while ( ((inw(SEEQ_STATUS) & SEEQSTAT_FIFO_EMPTY) != SEEQSTAT_FIFO_EMPTY) && time_before(jiffies, j) ) - mb(); - outw( 0 , SEEQ_DMAAR); - while ( ((inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && time_before(jiffies, j+HZ)) - mb(); - if ( (inw(SEEQ_STATUS) & SEEQSTAT_WINDOW_INT) == SEEQSTAT_WINDOW_INT) - outw( SEEQCMD_WINDOW_INT_ACK | (inw(SEEQ_STATUS)& SEEQCMD_INT_MASK), SEEQ_CMD); - outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - j=0; - for(i=0;i<32768;i++) { - if (inw(SEEQ_BUFFER) != 0x5a5a) - j++; - } - if (j) { - printk("%i\n",j); - } else { - printk("ok.\n"); - } - } -#endif - - if (net_debug && version_printed++ == 0) - printk(version); - - printk("%s: %s found at %#3x, ", dev->name, "seeq8005", ioaddr); - - /* Fill in the 'dev' fields. */ - dev->base_addr = ioaddr; - dev->irq = irq; - - /* Retrieve and print the ethernet address. */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = SA_prom[i+6]; - printk("%pM", dev->dev_addr); - - if (dev->irq == 0xff) - ; /* Do nothing: a user-level program will set it. */ - else if (dev->irq < 2) { /* "Auto-IRQ" */ - unsigned long cookie = probe_irq_on(); - - outw( SEEQCMD_RX_INT_EN | SEEQCMD_SET_RX_ON | SEEQCMD_SET_RX_OFF, SEEQ_CMD ); - - dev->irq = probe_irq_off(cookie); - - if (net_debug >= 2) - printk(" autoirq is %d\n", dev->irq); - } else if (dev->irq == 2) - /* Fixup for users that don't know that IRQ 2 is really IRQ 9, - * or don't know which one to set. - */ - dev->irq = 9; - -#if 0 - { - int irqval = request_irq(dev->irq, seeq8005_interrupt, 0, "seeq8005", dev); - if (irqval) { - printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name, - dev->irq, irqval); - retval = -EAGAIN; - goto out; - } - } -#endif - dev->netdev_ops = &seeq8005_netdev_ops; - dev->watchdog_timeo = HZ/20; - dev->flags &= ~IFF_MULTICAST; - - return 0; -out: - release_region(ioaddr, SEEQ8005_IO_EXTENT); - return retval; -} - - -/* Open/initialize the board. This is called (in the current kernel) - sometime after booting when the 'ifconfig' program is run. - - This routine should set everything up anew at each open, even - registers that "should" only need to be set once at boot, so that - there is non-reboot way to recover if something goes wrong. - */ -static int seeq8005_open(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - - { - int irqval = request_irq(dev->irq, seeq8005_interrupt, 0, "seeq8005", dev); - if (irqval) { - printk ("%s: unable to get IRQ %d (irqval=%d).\n", dev->name, - dev->irq, irqval); - return -EAGAIN; - } - } - - /* Reset the hardware here. Don't forget to set the station address. */ - seeq8005_init(dev, 1); - - lp->open_time = jiffies; - - netif_start_queue(dev); - return 0; -} - -static void seeq8005_timeout(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name, - tx_done(dev) ? "IRQ conflict" : "network cable problem"); - /* Try to restart the adaptor. */ - seeq8005_init(dev, 1); - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); -} - -static netdev_tx_t seeq8005_send_packet(struct sk_buff *skb, - struct net_device *dev) -{ - short length = skb->len; - unsigned char *buf; - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - buf = skb->data; - - /* Block a timer-based transmit from overlapping */ - netif_stop_queue(dev); - - hardware_send_packet(dev, buf, length); - dev->stats.tx_bytes += length; - dev_kfree_skb (skb); - /* You might need to clean up and record Tx statistics here. */ - - return NETDEV_TX_OK; -} - -/* - * wait_for_buffer - * - * This routine waits for the SEEQ chip to assert that the FIFO is ready - * by checking for a window interrupt, and then clearing it. This has to - * occur in the interrupt handler! - */ -inline void wait_for_buffer(struct net_device * dev) -{ - int ioaddr = dev->base_addr; - unsigned long tmp; - int status; - - tmp = jiffies + HZ; - while ( ( ((status=inw(SEEQ_STATUS)) & SEEQSTAT_WINDOW_INT) != SEEQSTAT_WINDOW_INT) && time_before(jiffies, tmp)) - cpu_relax(); - - if ( (status & SEEQSTAT_WINDOW_INT) == SEEQSTAT_WINDOW_INT) - outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t seeq8005_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status, boguscount = 0; - int handled = 0; - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - - status = inw(SEEQ_STATUS); - do { - if (net_debug >2) { - printk("%s: int, status=0x%04x\n",dev->name,status); - } - - if (status & SEEQSTAT_WINDOW_INT) { - handled = 1; - outw( SEEQCMD_WINDOW_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - if (net_debug) { - printk("%s: window int!\n",dev->name); - } - } - if (status & SEEQSTAT_TX_INT) { - handled = 1; - outw( SEEQCMD_TX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - dev->stats.tx_packets++; - netif_wake_queue(dev); /* Inform upper layers. */ - } - if (status & SEEQSTAT_RX_INT) { - handled = 1; - /* Got a packet(s). */ - seeq8005_rx(dev); - } - status = inw(SEEQ_STATUS); - } while ( (++boguscount < 10) && (status & SEEQSTAT_ANY_INT)) ; - - if(net_debug>2) { - printk("%s: eoi\n",dev->name); - } - return IRQ_RETVAL(handled); -} - -/* We have a good packet(s), get it/them out of the buffers. */ -static void seeq8005_rx(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int boguscount = 10; - int pkt_hdr; - int ioaddr = dev->base_addr; - - do { - int next_packet; - int pkt_len; - int i; - int status; - - status = inw(SEEQ_STATUS); - outw( lp->receive_ptr, SEEQ_DMAAR); - outw(SEEQCMD_FIFO_READ | SEEQCMD_RX_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - wait_for_buffer(dev); - next_packet = ntohs(inw(SEEQ_BUFFER)); - pkt_hdr = inw(SEEQ_BUFFER); - - if (net_debug>2) { - printk("%s: 0x%04x recv next=0x%04x, hdr=0x%04x\n",dev->name,lp->receive_ptr,next_packet,pkt_hdr); - } - - if ((next_packet == 0) || ((pkt_hdr & SEEQPKTH_CHAIN)==0)) { /* Read all the frames? */ - return; /* Done for now */ - } - - if ((pkt_hdr & SEEQPKTS_DONE)==0) - break; - - if (next_packet < lp->receive_ptr) { - pkt_len = (next_packet + 0x10000 - ((DEFAULT_TEA+1)<<8)) - lp->receive_ptr - 4; - } else { - pkt_len = next_packet - lp->receive_ptr - 4; - } - - if (next_packet < ((DEFAULT_TEA+1)<<8)) { /* is the next_packet address sane? */ - printk("%s: recv packet ring corrupt, resetting board\n",dev->name); - seeq8005_init(dev,1); - return; - } - - lp->receive_ptr = next_packet; - - if (net_debug>2) { - printk("%s: recv len=0x%04x\n",dev->name,pkt_len); - } - - if (pkt_hdr & SEEQPKTS_ANY_ERROR) { /* There was an error. */ - dev->stats.rx_errors++; - if (pkt_hdr & SEEQPKTS_SHORT) dev->stats.rx_frame_errors++; - if (pkt_hdr & SEEQPKTS_DRIB) dev->stats.rx_frame_errors++; - if (pkt_hdr & SEEQPKTS_OVERSIZE) dev->stats.rx_over_errors++; - if (pkt_hdr & SEEQPKTS_CRC_ERR) dev->stats.rx_crc_errors++; - /* skip over this packet */ - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_DMA_INT_ACK | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - outw( (lp->receive_ptr & 0xff00)>>8, SEEQ_REA); - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - unsigned char *buf; - - skb = dev_alloc_skb(pkt_len); - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - break; - } - skb_reserve(skb, 2); /* align data on 16 byte */ - buf = skb_put(skb,pkt_len); - - insw(SEEQ_BUFFER, buf, (pkt_len + 1) >> 1); - - if (net_debug>2) { - char * p = buf; - printk("%s: recv ",dev->name); - for(i=0;i<14;i++) { - printk("%02x ",*(p++)&0xff); - } - printk("\n"); - } - - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - } while ((--boguscount) && (pkt_hdr & SEEQPKTH_CHAIN)); - - /* If any worth-while packets have been received, netif_rx() - has done a mark_bh(NET_BH) for us and will work on them - when we get to the bottom-half routine. */ -} - -/* The inverse routine to net_open(). */ -static int seeq8005_close(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - lp->open_time = 0; - - netif_stop_queue(dev); - - /* Flush the Tx and disable Rx here. */ - outw( SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - - free_irq(dev->irq, dev); - - /* Update the statistics here. */ - - return 0; - -} - -/* Set or clear the multicast filter for this adaptor. - num_addrs == -1 Promiscuous mode, receive all packets - num_addrs == 0 Normal mode, clear multicast list - num_addrs > 0 Multicast mode, receive normal and MC packets, and do - best-effort filtering. - */ -static void set_multicast_list(struct net_device *dev) -{ -/* - * I _could_ do up to 6 addresses here, but won't (yet?) - */ - -#if 0 - int ioaddr = dev->base_addr; -/* - * hmm, not even sure if my matching works _anyway_ - seem to be receiving - * _everything_ . . . - */ - - if (num_addrs) { /* Enable promiscuous mode */ - outw( (inw(SEEQ_CFG1) & ~SEEQCFG1_MATCH_MASK)| SEEQCFG1_MATCH_ALL, SEEQ_CFG1); - dev->flags|=IFF_PROMISC; - } else { /* Disable promiscuous mode, use normal mode */ - outw( (inw(SEEQ_CFG1) & ~SEEQCFG1_MATCH_MASK)| SEEQCFG1_MATCH_BROAD, SEEQ_CFG1); - } -#endif -} - -void seeq8005_init(struct net_device *dev, int startp) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - int i; - - outw(SEEQCFG2_RESET, SEEQ_CFG2); /* reset device */ - udelay(5); - - outw( SEEQCMD_FIFO_WRITE | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - outw( 0, SEEQ_DMAAR); /* load start address into both low and high byte */ -/* wait_for_buffer(dev); */ /* I think that you only need a wait for memory buffer */ - outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1); - - for(i=0;i<6;i++) { /* set Station address */ - outb(dev->dev_addr[i], SEEQ_BUFFER); - udelay(2); - } - - outw( SEEQCFG1_BUFFER_TEA, SEEQ_CFG1); /* set xmit end area pointer to 16K */ - outb( DEFAULT_TEA, SEEQ_BUFFER); /* this gives us 16K of send buffer and 48K of recv buffer */ - - lp->receive_ptr = (DEFAULT_TEA+1)<<8; /* so we can find our packet_header */ - outw( lp->receive_ptr, SEEQ_RPR); /* Receive Pointer Register is set to recv buffer memory */ - - outw( 0x00ff, SEEQ_REA); /* Receive Area End */ - - if (net_debug>4) { - printk("%s: SA0 = ",dev->name); - - outw( SEEQCMD_FIFO_READ | SEEQCMD_SET_ALL_OFF, SEEQ_CMD); - outw( 0, SEEQ_DMAAR); - outw( SEEQCFG1_BUFFER_MAC0, SEEQ_CFG1); - - for(i=0;i<6;i++) { - printk("%02x ",inb(SEEQ_BUFFER)); - } - printk("\n"); - } - - outw( SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD | SEEQCFG1_BUFFER_BUFFER, SEEQ_CFG1); - outw( SEEQCFG2_AUTO_REA | SEEQCFG2_CTRLO, SEEQ_CFG2); - outw( SEEQCMD_SET_RX_ON | SEEQCMD_TX_INT_EN | SEEQCMD_RX_INT_EN, SEEQ_CMD); - - if (net_debug>4) { - int old_cfg1; - old_cfg1 = inw(SEEQ_CFG1); - printk("%s: stat = 0x%04x\n",dev->name,inw(SEEQ_STATUS)); - printk("%s: cfg1 = 0x%04x\n",dev->name,old_cfg1); - printk("%s: cfg2 = 0x%04x\n",dev->name,inw(SEEQ_CFG2)); - printk("%s: raer = 0x%04x\n",dev->name,inw(SEEQ_REA)); - printk("%s: dmaar= 0x%04x\n",dev->name,inw(SEEQ_DMAAR)); - - } -} - - -static void hardware_send_packet(struct net_device * dev, char *buf, int length) -{ - int ioaddr = dev->base_addr; - int status = inw(SEEQ_STATUS); - int transmit_ptr = 0; - unsigned long tmp; - - if (net_debug>4) { - printk("%s: send 0x%04x\n",dev->name,length); - } - - /* Set FIFO to writemode and set packet-buffer address */ - outw( SEEQCMD_FIFO_WRITE | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - outw( transmit_ptr, SEEQ_DMAAR); - - /* output SEEQ Packet header barfage */ - outw( htons(length + 4), SEEQ_BUFFER); - outw( SEEQPKTH_XMIT | SEEQPKTH_DATA_FOLLOWS | SEEQPKTH_XMIT_INT_EN, SEEQ_BUFFER ); - - /* blat the buffer */ - outsw( SEEQ_BUFFER, buf, (length +1) >> 1); - /* paranoia !! */ - outw( 0, SEEQ_BUFFER); - outw( 0, SEEQ_BUFFER); - - /* set address of start of transmit chain */ - outw( transmit_ptr, SEEQ_TPR); - - /* drain FIFO */ - tmp = jiffies; - while ( (((status=inw(SEEQ_STATUS)) & SEEQSTAT_FIFO_EMPTY) == 0) && time_before(jiffies, tmp + HZ)) - mb(); - - /* doit ! */ - outw( SEEQCMD_WINDOW_INT_ACK | SEEQCMD_SET_TX_ON | (status & SEEQCMD_INT_MASK), SEEQ_CMD); - -} - - -#ifdef MODULE - -static struct net_device *dev_seeq; -MODULE_LICENSE("GPL"); -module_param(io, int, 0); -module_param(irq, int, 0); -MODULE_PARM_DESC(io, "SEEQ 8005 I/O base address"); -MODULE_PARM_DESC(irq, "SEEQ 8005 IRQ number"); - -int __init init_module(void) -{ - dev_seeq = seeq8005_probe(-1); - if (IS_ERR(dev_seeq)) - return PTR_ERR(dev_seeq); - return 0; -} - -void __exit cleanup_module(void) -{ - unregister_netdev(dev_seeq); - release_region(dev_seeq->base_addr, SEEQ8005_IO_EXTENT); - free_netdev(dev_seeq); -} - -#endif /* MODULE */ diff --git a/drivers/net/seeq8005.h b/drivers/net/seeq8005.h deleted file mode 100644 index 5dfb0098c6ca..000000000000 --- a/drivers/net/seeq8005.h +++ /dev/null @@ -1,156 +0,0 @@ -/* - * defines, etc for the seeq8005 - */ - -/* - * This file is distributed under GPL. - * - * This style and layout of this file is also copied - * from many of the other linux network device drivers. - */ - -/* The number of low I/O ports used by the ethercard. */ -#define SEEQ8005_IO_EXTENT 16 - -#define SEEQ_B (ioaddr) - -#define SEEQ_CMD (SEEQ_B) /* Write only */ -#define SEEQ_STATUS (SEEQ_B) /* Read only */ -#define SEEQ_CFG1 (SEEQ_B + 2) -#define SEEQ_CFG2 (SEEQ_B + 4) -#define SEEQ_REA (SEEQ_B + 6) /* Receive End Area Register */ -#define SEEQ_RPR (SEEQ_B + 10) /* Receive Pointer Register */ -#define SEEQ_TPR (SEEQ_B + 12) /* Transmit Pointer Register */ -#define SEEQ_DMAAR (SEEQ_B + 14) /* DMA Address Register */ -#define SEEQ_BUFFER (SEEQ_B + 8) /* Buffer Window Register */ - -#define DEFAULT_TEA (0x3f) - -#define SEEQCMD_DMA_INT_EN (0x0001) /* DMA Interrupt Enable */ -#define SEEQCMD_RX_INT_EN (0x0002) /* Receive Interrupt Enable */ -#define SEEQCMD_TX_INT_EN (0x0004) /* Transmit Interrupt Enable */ -#define SEEQCMD_WINDOW_INT_EN (0x0008) /* What the hell is this for?? */ -#define SEEQCMD_INT_MASK (0x000f) - -#define SEEQCMD_DMA_INT_ACK (0x0010) /* DMA ack */ -#define SEEQCMD_RX_INT_ACK (0x0020) -#define SEEQCMD_TX_INT_ACK (0x0040) -#define SEEQCMD_WINDOW_INT_ACK (0x0080) -#define SEEQCMD_ACK_ALL (0x00f0) - -#define SEEQCMD_SET_DMA_ON (0x0100) /* Enables DMA Request logic */ -#define SEEQCMD_SET_RX_ON (0x0200) /* Enables Packet RX */ -#define SEEQCMD_SET_TX_ON (0x0400) /* Starts TX run */ -#define SEEQCMD_SET_DMA_OFF (0x0800) -#define SEEQCMD_SET_RX_OFF (0x1000) -#define SEEQCMD_SET_TX_OFF (0x2000) -#define SEEQCMD_SET_ALL_OFF (0x3800) /* set all logic off */ - -#define SEEQCMD_FIFO_READ (0x4000) /* Set FIFO to read mode (read from Buffer) */ -#define SEEQCMD_FIFO_WRITE (0x8000) /* Set FIFO to write mode */ - -#define SEEQSTAT_DMA_INT_EN (0x0001) /* Status of interrupt enable */ -#define SEEQSTAT_RX_INT_EN (0x0002) -#define SEEQSTAT_TX_INT_EN (0x0004) -#define SEEQSTAT_WINDOW_INT_EN (0x0008) - -#define SEEQSTAT_DMA_INT (0x0010) /* Interrupt flagged */ -#define SEEQSTAT_RX_INT (0x0020) -#define SEEQSTAT_TX_INT (0x0040) -#define SEEQSTAT_WINDOW_INT (0x0080) -#define SEEQSTAT_ANY_INT (0x00f0) - -#define SEEQSTAT_DMA_ON (0x0100) /* DMA logic on */ -#define SEEQSTAT_RX_ON (0x0200) /* Packet RX on */ -#define SEEQSTAT_TX_ON (0x0400) /* TX running */ - -#define SEEQSTAT_FIFO_FULL (0x2000) -#define SEEQSTAT_FIFO_EMPTY (0x4000) -#define SEEQSTAT_FIFO_DIR (0x8000) /* 1=read, 0=write */ - -#define SEEQCFG1_BUFFER_MASK (0x000f) /* define what maps into the BUFFER register */ -#define SEEQCFG1_BUFFER_MAC0 (0x0000) /* MAC station addresses 0-5 */ -#define SEEQCFG1_BUFFER_MAC1 (0x0001) -#define SEEQCFG1_BUFFER_MAC2 (0x0002) -#define SEEQCFG1_BUFFER_MAC3 (0x0003) -#define SEEQCFG1_BUFFER_MAC4 (0x0004) -#define SEEQCFG1_BUFFER_MAC5 (0x0005) -#define SEEQCFG1_BUFFER_PROM (0x0006) /* The Address/CFG PROM */ -#define SEEQCFG1_BUFFER_TEA (0x0007) /* Transmit end area */ -#define SEEQCFG1_BUFFER_BUFFER (0x0008) /* Packet buffer memory */ -#define SEEQCFG1_BUFFER_INT_VEC (0x0009) /* Interrupt Vector */ - -#define SEEQCFG1_DMA_INTVL_MASK (0x0030) -#define SEEQCFG1_DMA_CONT (0x0000) -#define SEEQCFG1_DMA_800ns (0x0010) -#define SEEQCFG1_DMA_1600ns (0x0020) -#define SEEQCFG1_DMA_3200ns (0x0030) - -#define SEEQCFG1_DMA_LEN_MASK (0x00c0) -#define SEEQCFG1_DMA_LEN1 (0x0000) -#define SEEQCFG1_DMA_LEN2 (0x0040) -#define SEEQCFG1_DMA_LEN4 (0x0080) -#define SEEQCFG1_DMA_LEN8 (0x00c0) - -#define SEEQCFG1_MAC_MASK (0x3f00) /* Dis/enable bits for MAC addresses */ -#define SEEQCFG1_MAC0_EN (0x0100) -#define SEEQCFG1_MAC1_EN (0x0200) -#define SEEQCFG1_MAC2_EN (0x0400) -#define SEEQCFG1_MAC3_EN (0x0800) -#define SEEQCFG1_MAC4_EN (0x1000) -#define SEEQCFG1_MAC5_EN (0x2000) - -#define SEEQCFG1_MATCH_MASK (0xc000) /* Packet matching logic cfg bits */ -#define SEEQCFG1_MATCH_SPECIFIC (0x0000) /* only matching MAC addresses */ -#define SEEQCFG1_MATCH_BROAD (0x4000) /* matching and broadcast addresses */ -#define SEEQCFG1_MATCH_MULTI (0x8000) /* matching, broadcast and multicast */ -#define SEEQCFG1_MATCH_ALL (0xc000) /* Promiscuous mode */ - -#define SEEQCFG1_DEFAULT (SEEQCFG1_BUFFER_BUFFER | SEEQCFG1_MAC0_EN | SEEQCFG1_MATCH_BROAD) - -#define SEEQCFG2_BYTE_SWAP (0x0001) /* 0=Intel byte-order */ -#define SEEQCFG2_AUTO_REA (0x0002) /* if set, Receive End Area will be updated when reading from Buffer */ - -#define SEEQCFG2_CRC_ERR_EN (0x0008) /* enables receiving of packets with CRC errors */ -#define SEEQCFG2_DRIBBLE_EN (0x0010) /* enables receiving of non-aligned packets */ -#define SEEQCFG2_SHORT_EN (0x0020) /* enables receiving of short packets */ - -#define SEEQCFG2_SLOTSEL (0x0040) /* 0= standard IEEE802.3, 1= smaller,faster, non-standard */ -#define SEEQCFG2_NO_PREAM (0x0080) /* 1= user supplies Xmit preamble bytes */ -#define SEEQCFG2_ADDR_LEN (0x0100) /* 1= 2byte addresses */ -#define SEEQCFG2_REC_CRC (0x0200) /* 0= received packets will have CRC stripped from them */ -#define SEEQCFG2_XMIT_NO_CRC (0x0400) /* don't xmit CRC with each packet (user supplies it) */ -#define SEEQCFG2_LOOPBACK (0x0800) -#define SEEQCFG2_CTRLO (0x1000) -#define SEEQCFG2_RESET (0x8000) /* software Hard-reset bit */ - -struct seeq_pkt_hdr { - unsigned short next; /* address of next packet header */ - unsigned char babble_int:1, /* enable int on >1514 byte packet */ - coll_int:1, /* enable int on collision */ - coll_16_int:1, /* enable int on >15 collision */ - xmit_int:1, /* enable int on success (or xmit with <15 collision) */ - unused:1, - data_follows:1, /* if not set, process this as a header and pointer only */ - chain_cont:1, /* if set, more headers in chain only cmd bit valid in recv header */ - xmit_recv:1; /* if set, a xmit packet, else a receive packet.*/ - unsigned char status; -}; - -#define SEEQPKTH_BAB_INT_EN (0x01) /* xmit only */ -#define SEEQPKTH_COL_INT_EN (0x02) /* xmit only */ -#define SEEQPKTH_COL16_INT_EN (0x04) /* xmit only */ -#define SEEQPKTH_XMIT_INT_EN (0x08) /* xmit only */ -#define SEEQPKTH_DATA_FOLLOWS (0x20) /* supposedly in xmit only */ -#define SEEQPKTH_CHAIN (0x40) /* more headers follow */ -#define SEEQPKTH_XMIT (0x80) - -#define SEEQPKTS_BABBLE (0x0100) /* xmit only */ -#define SEEQPKTS_OVERSIZE (0x0100) /* recv only */ -#define SEEQPKTS_COLLISION (0x0200) /* xmit only */ -#define SEEQPKTS_CRC_ERR (0x0200) /* recv only */ -#define SEEQPKTS_COLL16 (0x0400) /* xmit only */ -#define SEEQPKTS_DRIB (0x0400) /* recv only */ -#define SEEQPKTS_SHORT (0x0800) /* recv only */ -#define SEEQPKTS_DONE (0x8000) -#define SEEQPKTS_ANY_ERROR (0x0f00) diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c deleted file mode 100644 index 52fb7ed9f365..000000000000 --- a/drivers/net/sgiseeq.c +++ /dev/null @@ -1,858 +0,0 @@ -/* - * sgiseeq.c: Seeq8003 ethernet driver for SGI machines. - * - * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "sgiseeq.h" - -static char *sgiseeqstr = "SGI Seeq8003"; - -/* - * If you want speed, you do something silly, it always has worked for me. So, - * with that in mind, I've decided to make this driver look completely like a - * stupid Lance from a driver architecture perspective. Only difference is that - * here our "ring buffer" looks and acts like a real Lance one does but is - * laid out like how the HPC DMA and the Seeq want it to. You'd be surprised - * how a stupid idea like this can pay off in performance, not to mention - * making this driver 2,000 times easier to write. ;-) - */ - -/* Tune these if we tend to run out often etc. */ -#define SEEQ_RX_BUFFERS 16 -#define SEEQ_TX_BUFFERS 16 - -#define PKT_BUF_SZ 1584 - -#define NEXT_RX(i) (((i) + 1) & (SEEQ_RX_BUFFERS - 1)) -#define NEXT_TX(i) (((i) + 1) & (SEEQ_TX_BUFFERS - 1)) -#define PREV_RX(i) (((i) - 1) & (SEEQ_RX_BUFFERS - 1)) -#define PREV_TX(i) (((i) - 1) & (SEEQ_TX_BUFFERS - 1)) - -#define TX_BUFFS_AVAIL(sp) ((sp->tx_old <= sp->tx_new) ? \ - sp->tx_old + (SEEQ_TX_BUFFERS - 1) - sp->tx_new : \ - sp->tx_old - sp->tx_new - 1) - -#define VIRT_TO_DMA(sp, v) ((sp)->srings_dma + \ - (dma_addr_t)((unsigned long)(v) - \ - (unsigned long)((sp)->rx_desc))) - -/* Copy frames shorter than rx_copybreak, otherwise pass on up in - * a full sized sk_buff. Value of 100 stolen from tulip.c (!alpha). - */ -static int rx_copybreak = 100; - -#define PAD_SIZE (128 - sizeof(struct hpc_dma_desc) - sizeof(void *)) - -struct sgiseeq_rx_desc { - volatile struct hpc_dma_desc rdma; - u8 padding[PAD_SIZE]; - struct sk_buff *skb; -}; - -struct sgiseeq_tx_desc { - volatile struct hpc_dma_desc tdma; - u8 padding[PAD_SIZE]; - struct sk_buff *skb; -}; - -/* - * Warning: This structure is laid out in a certain way because HPC dma - * descriptors must be 8-byte aligned. So don't touch this without - * some care. - */ -struct sgiseeq_init_block { /* Note the name ;-) */ - struct sgiseeq_rx_desc rxvector[SEEQ_RX_BUFFERS]; - struct sgiseeq_tx_desc txvector[SEEQ_TX_BUFFERS]; -}; - -struct sgiseeq_private { - struct sgiseeq_init_block *srings; - dma_addr_t srings_dma; - - /* Ptrs to the descriptors in uncached space. */ - struct sgiseeq_rx_desc *rx_desc; - struct sgiseeq_tx_desc *tx_desc; - - char *name; - struct hpc3_ethregs *hregs; - struct sgiseeq_regs *sregs; - - /* Ring entry counters. */ - unsigned int rx_new, tx_new; - unsigned int rx_old, tx_old; - - int is_edlc; - unsigned char control; - unsigned char mode; - - spinlock_t tx_lock; -}; - -static inline void dma_sync_desc_cpu(struct net_device *dev, void *addr) -{ - dma_cache_sync(dev->dev.parent, addr, sizeof(struct sgiseeq_rx_desc), - DMA_FROM_DEVICE); -} - -static inline void dma_sync_desc_dev(struct net_device *dev, void *addr) -{ - dma_cache_sync(dev->dev.parent, addr, sizeof(struct sgiseeq_rx_desc), - DMA_TO_DEVICE); -} - -static inline void hpc3_eth_reset(struct hpc3_ethregs *hregs) -{ - hregs->reset = HPC3_ERST_CRESET | HPC3_ERST_CLRIRQ; - udelay(20); - hregs->reset = 0; -} - -static inline void reset_hpc3_and_seeq(struct hpc3_ethregs *hregs, - struct sgiseeq_regs *sregs) -{ - hregs->rx_ctrl = hregs->tx_ctrl = 0; - hpc3_eth_reset(hregs); -} - -#define RSTAT_GO_BITS (SEEQ_RCMD_IGOOD | SEEQ_RCMD_IEOF | SEEQ_RCMD_ISHORT | \ - SEEQ_RCMD_IDRIB | SEEQ_RCMD_ICRC) - -static inline void seeq_go(struct sgiseeq_private *sp, - struct hpc3_ethregs *hregs, - struct sgiseeq_regs *sregs) -{ - sregs->rstat = sp->mode | RSTAT_GO_BITS; - hregs->rx_ctrl = HPC3_ERXCTRL_ACTIVE; -} - -static inline void __sgiseeq_set_mac_address(struct net_device *dev) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - struct sgiseeq_regs *sregs = sp->sregs; - int i; - - sregs->tstat = SEEQ_TCMD_RB0; - for (i = 0; i < 6; i++) - sregs->rw.eth_addr[i] = dev->dev_addr[i]; -} - -static int sgiseeq_set_mac_address(struct net_device *dev, void *addr) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - struct sockaddr *sa = addr; - - memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); - - spin_lock_irq(&sp->tx_lock); - __sgiseeq_set_mac_address(dev); - spin_unlock_irq(&sp->tx_lock); - - return 0; -} - -#define TCNTINFO_INIT (HPCDMA_EOX | HPCDMA_ETXD) -#define RCNTCFG_INIT (HPCDMA_OWN | HPCDMA_EORP | HPCDMA_XIE) -#define RCNTINFO_INIT (RCNTCFG_INIT | (PKT_BUF_SZ & HPCDMA_BCNT)) - -static int seeq_init_ring(struct net_device *dev) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - int i; - - netif_stop_queue(dev); - sp->rx_new = sp->tx_new = 0; - sp->rx_old = sp->tx_old = 0; - - __sgiseeq_set_mac_address(dev); - - /* Setup tx ring. */ - for(i = 0; i < SEEQ_TX_BUFFERS; i++) { - sp->tx_desc[i].tdma.cntinfo = TCNTINFO_INIT; - dma_sync_desc_dev(dev, &sp->tx_desc[i]); - } - - /* And now the rx ring. */ - for (i = 0; i < SEEQ_RX_BUFFERS; i++) { - if (!sp->rx_desc[i].skb) { - dma_addr_t dma_addr; - struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ); - - if (skb == NULL) - return -ENOMEM; - skb_reserve(skb, 2); - dma_addr = dma_map_single(dev->dev.parent, - skb->data - 2, - PKT_BUF_SZ, DMA_FROM_DEVICE); - sp->rx_desc[i].skb = skb; - sp->rx_desc[i].rdma.pbuf = dma_addr; - } - sp->rx_desc[i].rdma.cntinfo = RCNTINFO_INIT; - dma_sync_desc_dev(dev, &sp->rx_desc[i]); - } - sp->rx_desc[i - 1].rdma.cntinfo |= HPCDMA_EOR; - dma_sync_desc_dev(dev, &sp->rx_desc[i - 1]); - return 0; -} - -static void seeq_purge_ring(struct net_device *dev) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - int i; - - /* clear tx ring. */ - for (i = 0; i < SEEQ_TX_BUFFERS; i++) { - if (sp->tx_desc[i].skb) { - dev_kfree_skb(sp->tx_desc[i].skb); - sp->tx_desc[i].skb = NULL; - } - } - - /* And now the rx ring. */ - for (i = 0; i < SEEQ_RX_BUFFERS; i++) { - if (sp->rx_desc[i].skb) { - dev_kfree_skb(sp->rx_desc[i].skb); - sp->rx_desc[i].skb = NULL; - } - } -} - -#ifdef DEBUG -static struct sgiseeq_private *gpriv; -static struct net_device *gdev; - -static void sgiseeq_dump_rings(void) -{ - static int once; - struct sgiseeq_rx_desc *r = gpriv->rx_desc; - struct sgiseeq_tx_desc *t = gpriv->tx_desc; - struct hpc3_ethregs *hregs = gpriv->hregs; - int i; - - if (once) - return; - once++; - printk("RING DUMP:\n"); - for (i = 0; i < SEEQ_RX_BUFFERS; i++) { - printk("RX [%d]: @(%p) [%08x,%08x,%08x] ", - i, (&r[i]), r[i].rdma.pbuf, r[i].rdma.cntinfo, - r[i].rdma.pnext); - i += 1; - printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n", - i, (&r[i]), r[i].rdma.pbuf, r[i].rdma.cntinfo, - r[i].rdma.pnext); - } - for (i = 0; i < SEEQ_TX_BUFFERS; i++) { - printk("TX [%d]: @(%p) [%08x,%08x,%08x] ", - i, (&t[i]), t[i].tdma.pbuf, t[i].tdma.cntinfo, - t[i].tdma.pnext); - i += 1; - printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n", - i, (&t[i]), t[i].tdma.pbuf, t[i].tdma.cntinfo, - t[i].tdma.pnext); - } - printk("INFO: [rx_new = %d rx_old=%d] [tx_new = %d tx_old = %d]\n", - gpriv->rx_new, gpriv->rx_old, gpriv->tx_new, gpriv->tx_old); - printk("RREGS: rx_cbptr[%08x] rx_ndptr[%08x] rx_ctrl[%08x]\n", - hregs->rx_cbptr, hregs->rx_ndptr, hregs->rx_ctrl); - printk("TREGS: tx_cbptr[%08x] tx_ndptr[%08x] tx_ctrl[%08x]\n", - hregs->tx_cbptr, hregs->tx_ndptr, hregs->tx_ctrl); -} -#endif - -#define TSTAT_INIT_SEEQ (SEEQ_TCMD_IPT|SEEQ_TCMD_I16|SEEQ_TCMD_IC|SEEQ_TCMD_IUF) -#define TSTAT_INIT_EDLC ((TSTAT_INIT_SEEQ) | SEEQ_TCMD_RB2) - -static int init_seeq(struct net_device *dev, struct sgiseeq_private *sp, - struct sgiseeq_regs *sregs) -{ - struct hpc3_ethregs *hregs = sp->hregs; - int err; - - reset_hpc3_and_seeq(hregs, sregs); - err = seeq_init_ring(dev); - if (err) - return err; - - /* Setup to field the proper interrupt types. */ - if (sp->is_edlc) { - sregs->tstat = TSTAT_INIT_EDLC; - sregs->rw.wregs.control = sp->control; - sregs->rw.wregs.frame_gap = 0; - } else { - sregs->tstat = TSTAT_INIT_SEEQ; - } - - hregs->rx_ndptr = VIRT_TO_DMA(sp, sp->rx_desc); - hregs->tx_ndptr = VIRT_TO_DMA(sp, sp->tx_desc); - - seeq_go(sp, hregs, sregs); - return 0; -} - -static void record_rx_errors(struct net_device *dev, unsigned char status) -{ - if (status & SEEQ_RSTAT_OVERF || - status & SEEQ_RSTAT_SFRAME) - dev->stats.rx_over_errors++; - if (status & SEEQ_RSTAT_CERROR) - dev->stats.rx_crc_errors++; - if (status & SEEQ_RSTAT_DERROR) - dev->stats.rx_frame_errors++; - if (status & SEEQ_RSTAT_REOF) - dev->stats.rx_errors++; -} - -static inline void rx_maybe_restart(struct sgiseeq_private *sp, - struct hpc3_ethregs *hregs, - struct sgiseeq_regs *sregs) -{ - if (!(hregs->rx_ctrl & HPC3_ERXCTRL_ACTIVE)) { - hregs->rx_ndptr = VIRT_TO_DMA(sp, sp->rx_desc + sp->rx_new); - seeq_go(sp, hregs, sregs); - } -} - -static inline void sgiseeq_rx(struct net_device *dev, struct sgiseeq_private *sp, - struct hpc3_ethregs *hregs, - struct sgiseeq_regs *sregs) -{ - struct sgiseeq_rx_desc *rd; - struct sk_buff *skb = NULL; - struct sk_buff *newskb; - unsigned char pkt_status; - int len = 0; - unsigned int orig_end = PREV_RX(sp->rx_new); - - /* Service every received packet. */ - rd = &sp->rx_desc[sp->rx_new]; - dma_sync_desc_cpu(dev, rd); - while (!(rd->rdma.cntinfo & HPCDMA_OWN)) { - len = PKT_BUF_SZ - (rd->rdma.cntinfo & HPCDMA_BCNT) - 3; - dma_unmap_single(dev->dev.parent, rd->rdma.pbuf, - PKT_BUF_SZ, DMA_FROM_DEVICE); - pkt_status = rd->skb->data[len]; - if (pkt_status & SEEQ_RSTAT_FIG) { - /* Packet is OK. */ - /* We don't want to receive our own packets */ - if (memcmp(rd->skb->data + 6, dev->dev_addr, ETH_ALEN)) { - if (len > rx_copybreak) { - skb = rd->skb; - newskb = netdev_alloc_skb(dev, PKT_BUF_SZ); - if (!newskb) { - newskb = skb; - skb = NULL; - goto memory_squeeze; - } - skb_reserve(newskb, 2); - } else { - skb = netdev_alloc_skb_ip_align(dev, len); - if (skb) - skb_copy_to_linear_data(skb, rd->skb->data, len); - - newskb = rd->skb; - } -memory_squeeze: - if (skb) { - skb_put(skb, len); - skb->protocol = eth_type_trans(skb, dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += len; - } else { - printk(KERN_NOTICE "%s: Memory squeeze, deferring packet.\n", - dev->name); - dev->stats.rx_dropped++; - } - } else { - /* Silently drop my own packets */ - newskb = rd->skb; - } - } else { - record_rx_errors(dev, pkt_status); - newskb = rd->skb; - } - rd->skb = newskb; - rd->rdma.pbuf = dma_map_single(dev->dev.parent, - newskb->data - 2, - PKT_BUF_SZ, DMA_FROM_DEVICE); - - /* Return the entry to the ring pool. */ - rd->rdma.cntinfo = RCNTINFO_INIT; - sp->rx_new = NEXT_RX(sp->rx_new); - dma_sync_desc_dev(dev, rd); - rd = &sp->rx_desc[sp->rx_new]; - dma_sync_desc_cpu(dev, rd); - } - dma_sync_desc_cpu(dev, &sp->rx_desc[orig_end]); - sp->rx_desc[orig_end].rdma.cntinfo &= ~(HPCDMA_EOR); - dma_sync_desc_dev(dev, &sp->rx_desc[orig_end]); - dma_sync_desc_cpu(dev, &sp->rx_desc[PREV_RX(sp->rx_new)]); - sp->rx_desc[PREV_RX(sp->rx_new)].rdma.cntinfo |= HPCDMA_EOR; - dma_sync_desc_dev(dev, &sp->rx_desc[PREV_RX(sp->rx_new)]); - rx_maybe_restart(sp, hregs, sregs); -} - -static inline void tx_maybe_reset_collisions(struct sgiseeq_private *sp, - struct sgiseeq_regs *sregs) -{ - if (sp->is_edlc) { - sregs->rw.wregs.control = sp->control & ~(SEEQ_CTRL_XCNT); - sregs->rw.wregs.control = sp->control; - } -} - -static inline void kick_tx(struct net_device *dev, - struct sgiseeq_private *sp, - struct hpc3_ethregs *hregs) -{ - struct sgiseeq_tx_desc *td; - int i = sp->tx_old; - - /* If the HPC aint doin nothin, and there are more packets - * with ETXD cleared and XIU set we must make very certain - * that we restart the HPC else we risk locking up the - * adapter. The following code is only safe iff the HPCDMA - * is not active! - */ - td = &sp->tx_desc[i]; - dma_sync_desc_cpu(dev, td); - while ((td->tdma.cntinfo & (HPCDMA_XIU | HPCDMA_ETXD)) == - (HPCDMA_XIU | HPCDMA_ETXD)) { - i = NEXT_TX(i); - td = &sp->tx_desc[i]; - dma_sync_desc_cpu(dev, td); - } - if (td->tdma.cntinfo & HPCDMA_XIU) { - hregs->tx_ndptr = VIRT_TO_DMA(sp, td); - hregs->tx_ctrl = HPC3_ETXCTRL_ACTIVE; - } -} - -static inline void sgiseeq_tx(struct net_device *dev, struct sgiseeq_private *sp, - struct hpc3_ethregs *hregs, - struct sgiseeq_regs *sregs) -{ - struct sgiseeq_tx_desc *td; - unsigned long status = hregs->tx_ctrl; - int j; - - tx_maybe_reset_collisions(sp, sregs); - - if (!(status & (HPC3_ETXCTRL_ACTIVE | SEEQ_TSTAT_PTRANS))) { - /* Oops, HPC detected some sort of error. */ - if (status & SEEQ_TSTAT_R16) - dev->stats.tx_aborted_errors++; - if (status & SEEQ_TSTAT_UFLOW) - dev->stats.tx_fifo_errors++; - if (status & SEEQ_TSTAT_LCLS) - dev->stats.collisions++; - } - - /* Ack 'em... */ - for (j = sp->tx_old; j != sp->tx_new; j = NEXT_TX(j)) { - td = &sp->tx_desc[j]; - - dma_sync_desc_cpu(dev, td); - if (!(td->tdma.cntinfo & (HPCDMA_XIU))) - break; - if (!(td->tdma.cntinfo & (HPCDMA_ETXD))) { - if (!(status & HPC3_ETXCTRL_ACTIVE)) { - hregs->tx_ndptr = VIRT_TO_DMA(sp, td); - hregs->tx_ctrl = HPC3_ETXCTRL_ACTIVE; - } - break; - } - dev->stats.tx_packets++; - sp->tx_old = NEXT_TX(sp->tx_old); - td->tdma.cntinfo &= ~(HPCDMA_XIU | HPCDMA_XIE); - td->tdma.cntinfo |= HPCDMA_EOX; - if (td->skb) { - dev_kfree_skb_any(td->skb); - td->skb = NULL; - } - dma_sync_desc_dev(dev, td); - } -} - -static irqreturn_t sgiseeq_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *) dev_id; - struct sgiseeq_private *sp = netdev_priv(dev); - struct hpc3_ethregs *hregs = sp->hregs; - struct sgiseeq_regs *sregs = sp->sregs; - - spin_lock(&sp->tx_lock); - - /* Ack the IRQ and set software state. */ - hregs->reset = HPC3_ERST_CLRIRQ; - - /* Always check for received packets. */ - sgiseeq_rx(dev, sp, hregs, sregs); - - /* Only check for tx acks if we have something queued. */ - if (sp->tx_old != sp->tx_new) - sgiseeq_tx(dev, sp, hregs, sregs); - - if ((TX_BUFFS_AVAIL(sp) > 0) && netif_queue_stopped(dev)) { - netif_wake_queue(dev); - } - spin_unlock(&sp->tx_lock); - - return IRQ_HANDLED; -} - -static int sgiseeq_open(struct net_device *dev) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - struct sgiseeq_regs *sregs = sp->sregs; - unsigned int irq = dev->irq; - int err; - - if (request_irq(irq, sgiseeq_interrupt, 0, sgiseeqstr, dev)) { - printk(KERN_ERR "Seeq8003: Can't get irq %d\n", dev->irq); - return -EAGAIN; - } - - err = init_seeq(dev, sp, sregs); - if (err) - goto out_free_irq; - - netif_start_queue(dev); - - return 0; - -out_free_irq: - free_irq(irq, dev); - - return err; -} - -static int sgiseeq_close(struct net_device *dev) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - struct sgiseeq_regs *sregs = sp->sregs; - unsigned int irq = dev->irq; - - netif_stop_queue(dev); - - /* Shutdown the Seeq. */ - reset_hpc3_and_seeq(sp->hregs, sregs); - free_irq(irq, dev); - seeq_purge_ring(dev); - - return 0; -} - -static inline int sgiseeq_reset(struct net_device *dev) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - struct sgiseeq_regs *sregs = sp->sregs; - int err; - - err = init_seeq(dev, sp, sregs); - if (err) - return err; - - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); - - return 0; -} - -static int sgiseeq_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - struct hpc3_ethregs *hregs = sp->hregs; - unsigned long flags; - struct sgiseeq_tx_desc *td; - int len, entry; - - spin_lock_irqsave(&sp->tx_lock, flags); - - /* Setup... */ - len = skb->len; - if (len < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) { - spin_unlock_irqrestore(&sp->tx_lock, flags); - return NETDEV_TX_OK; - } - len = ETH_ZLEN; - } - - dev->stats.tx_bytes += len; - entry = sp->tx_new; - td = &sp->tx_desc[entry]; - dma_sync_desc_cpu(dev, td); - - /* Create entry. There are so many races with adding a new - * descriptor to the chain: - * 1) Assume that the HPC is off processing a DMA chain while - * we are changing all of the following. - * 2) Do no allow the HPC to look at a new descriptor until - * we have completely set up it's state. This means, do - * not clear HPCDMA_EOX in the current last descritptor - * until the one we are adding looks consistent and could - * be processes right now. - * 3) The tx interrupt code must notice when we've added a new - * entry and the HPC got to the end of the chain before we - * added this new entry and restarted it. - */ - td->skb = skb; - td->tdma.pbuf = dma_map_single(dev->dev.parent, skb->data, - len, DMA_TO_DEVICE); - td->tdma.cntinfo = (len & HPCDMA_BCNT) | - HPCDMA_XIU | HPCDMA_EOXP | HPCDMA_XIE | HPCDMA_EOX; - dma_sync_desc_dev(dev, td); - if (sp->tx_old != sp->tx_new) { - struct sgiseeq_tx_desc *backend; - - backend = &sp->tx_desc[PREV_TX(sp->tx_new)]; - dma_sync_desc_cpu(dev, backend); - backend->tdma.cntinfo &= ~HPCDMA_EOX; - dma_sync_desc_dev(dev, backend); - } - sp->tx_new = NEXT_TX(sp->tx_new); /* Advance. */ - - /* Maybe kick the HPC back into motion. */ - if (!(hregs->tx_ctrl & HPC3_ETXCTRL_ACTIVE)) - kick_tx(dev, sp, hregs); - - if (!TX_BUFFS_AVAIL(sp)) - netif_stop_queue(dev); - spin_unlock_irqrestore(&sp->tx_lock, flags); - - return NETDEV_TX_OK; -} - -static void timeout(struct net_device *dev) -{ - printk(KERN_NOTICE "%s: transmit timed out, resetting\n", dev->name); - sgiseeq_reset(dev); - - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue(dev); -} - -static void sgiseeq_set_multicast(struct net_device *dev) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - unsigned char oldmode = sp->mode; - - if(dev->flags & IFF_PROMISC) - sp->mode = SEEQ_RCMD_RANY; - else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) - sp->mode = SEEQ_RCMD_RBMCAST; - else - sp->mode = SEEQ_RCMD_RBCAST; - - /* XXX I know this sucks, but is there a better way to reprogram - * XXX the receiver? At least, this shouldn't happen too often. - */ - - if (oldmode != sp->mode) - sgiseeq_reset(dev); -} - -static inline void setup_tx_ring(struct net_device *dev, - struct sgiseeq_tx_desc *buf, - int nbufs) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - int i = 0; - - while (i < (nbufs - 1)) { - buf[i].tdma.pnext = VIRT_TO_DMA(sp, buf + i + 1); - buf[i].tdma.pbuf = 0; - dma_sync_desc_dev(dev, &buf[i]); - i++; - } - buf[i].tdma.pnext = VIRT_TO_DMA(sp, buf); - dma_sync_desc_dev(dev, &buf[i]); -} - -static inline void setup_rx_ring(struct net_device *dev, - struct sgiseeq_rx_desc *buf, - int nbufs) -{ - struct sgiseeq_private *sp = netdev_priv(dev); - int i = 0; - - while (i < (nbufs - 1)) { - buf[i].rdma.pnext = VIRT_TO_DMA(sp, buf + i + 1); - buf[i].rdma.pbuf = 0; - dma_sync_desc_dev(dev, &buf[i]); - i++; - } - buf[i].rdma.pbuf = 0; - buf[i].rdma.pnext = VIRT_TO_DMA(sp, buf); - dma_sync_desc_dev(dev, &buf[i]); -} - -static const struct net_device_ops sgiseeq_netdev_ops = { - .ndo_open = sgiseeq_open, - .ndo_stop = sgiseeq_close, - .ndo_start_xmit = sgiseeq_start_xmit, - .ndo_tx_timeout = timeout, - .ndo_set_multicast_list = sgiseeq_set_multicast, - .ndo_set_mac_address = sgiseeq_set_mac_address, - .ndo_change_mtu = eth_change_mtu, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __devinit sgiseeq_probe(struct platform_device *pdev) -{ - struct sgiseeq_platform_data *pd = pdev->dev.platform_data; - struct hpc3_regs *hpcregs = pd->hpc; - struct sgiseeq_init_block *sr; - unsigned int irq = pd->irq; - struct sgiseeq_private *sp; - struct net_device *dev; - int err; - - dev = alloc_etherdev(sizeof (struct sgiseeq_private)); - if (!dev) { - printk(KERN_ERR "Sgiseeq: Etherdev alloc failed, aborting.\n"); - err = -ENOMEM; - goto err_out; - } - - platform_set_drvdata(pdev, dev); - sp = netdev_priv(dev); - - /* Make private data page aligned */ - sr = dma_alloc_noncoherent(&pdev->dev, sizeof(*sp->srings), - &sp->srings_dma, GFP_KERNEL); - if (!sr) { - printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n"); - err = -ENOMEM; - goto err_out_free_dev; - } - sp->srings = sr; - sp->rx_desc = sp->srings->rxvector; - sp->tx_desc = sp->srings->txvector; - - /* A couple calculations now, saves many cycles later. */ - setup_rx_ring(dev, sp->rx_desc, SEEQ_RX_BUFFERS); - setup_tx_ring(dev, sp->tx_desc, SEEQ_TX_BUFFERS); - - memcpy(dev->dev_addr, pd->mac, ETH_ALEN); - -#ifdef DEBUG - gpriv = sp; - gdev = dev; -#endif - sp->sregs = (struct sgiseeq_regs *) &hpcregs->eth_ext[0]; - sp->hregs = &hpcregs->ethregs; - sp->name = sgiseeqstr; - sp->mode = SEEQ_RCMD_RBCAST; - - /* Setup PIO and DMA transfer timing */ - sp->hregs->pconfig = 0x161; - sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | - HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; - - /* Setup PIO and DMA transfer timing */ - sp->hregs->pconfig = 0x161; - sp->hregs->dconfig = HPC3_EDCFG_FIRQ | HPC3_EDCFG_FEOP | - HPC3_EDCFG_FRXDC | HPC3_EDCFG_PTO | 0x026; - - /* Reset the chip. */ - hpc3_eth_reset(sp->hregs); - - sp->is_edlc = !(sp->sregs->rw.rregs.collision_tx[0] & 0xff); - if (sp->is_edlc) - sp->control = SEEQ_CTRL_XCNT | SEEQ_CTRL_ACCNT | - SEEQ_CTRL_SFLAG | SEEQ_CTRL_ESHORT | - SEEQ_CTRL_ENCARR; - - dev->netdev_ops = &sgiseeq_netdev_ops; - dev->watchdog_timeo = (200 * HZ) / 1000; - dev->irq = irq; - - if (register_netdev(dev)) { - printk(KERN_ERR "Sgiseeq: Cannot register net device, " - "aborting.\n"); - err = -ENODEV; - goto err_out_free_page; - } - - printk(KERN_INFO "%s: %s %pM\n", dev->name, sgiseeqstr, dev->dev_addr); - - return 0; - -err_out_free_page: - free_page((unsigned long) sp->srings); -err_out_free_dev: - free_netdev(dev); - -err_out: - return err; -} - -static int __exit sgiseeq_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct sgiseeq_private *sp = netdev_priv(dev); - - unregister_netdev(dev); - dma_free_noncoherent(&pdev->dev, sizeof(*sp->srings), sp->srings, - sp->srings_dma); - free_netdev(dev); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static struct platform_driver sgiseeq_driver = { - .probe = sgiseeq_probe, - .remove = __exit_p(sgiseeq_remove), - .driver = { - .name = "sgiseeq", - .owner = THIS_MODULE, - } -}; - -static int __init sgiseeq_module_init(void) -{ - if (platform_driver_register(&sgiseeq_driver)) { - printk(KERN_ERR "Driver registration failed\n"); - return -ENODEV; - } - - return 0; -} - -static void __exit sgiseeq_module_exit(void) -{ - platform_driver_unregister(&sgiseeq_driver); -} - -module_init(sgiseeq_module_init); -module_exit(sgiseeq_module_exit); - -MODULE_DESCRIPTION("SGI Seeq 8003 driver"); -MODULE_AUTHOR("Linux/MIPS Mailing List "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:sgiseeq"); diff --git a/drivers/net/sgiseeq.h b/drivers/net/sgiseeq.h deleted file mode 100644 index 2211e2987a8d..000000000000 --- a/drivers/net/sgiseeq.h +++ /dev/null @@ -1,103 +0,0 @@ -/* - * sgiseeq.h: Defines for the Seeq8003 ethernet controller. - * - * Copyright (C) 1996 David S. Miller (davem@davemloft.net) - */ -#ifndef _SGISEEQ_H -#define _SGISEEQ_H - -struct sgiseeq_wregs { - volatile unsigned int multicase_high[2]; - volatile unsigned int frame_gap; - volatile unsigned int control; -}; - -struct sgiseeq_rregs { - volatile unsigned int collision_tx[2]; - volatile unsigned int collision_all[2]; - volatile unsigned int _unused0; - volatile unsigned int rflags; -}; - -struct sgiseeq_regs { - union { - volatile unsigned int eth_addr[6]; - volatile unsigned int multicast_low[6]; - struct sgiseeq_wregs wregs; - struct sgiseeq_rregs rregs; - } rw; - volatile unsigned int rstat; - volatile unsigned int tstat; -}; - -/* Seeq8003 receive status register */ -#define SEEQ_RSTAT_OVERF 0x001 /* Overflow */ -#define SEEQ_RSTAT_CERROR 0x002 /* CRC error */ -#define SEEQ_RSTAT_DERROR 0x004 /* Dribble error */ -#define SEEQ_RSTAT_SFRAME 0x008 /* Short frame */ -#define SEEQ_RSTAT_REOF 0x010 /* Received end of frame */ -#define SEEQ_RSTAT_FIG 0x020 /* Frame is good */ -#define SEEQ_RSTAT_TIMEO 0x040 /* Timeout, or late receive */ -#define SEEQ_RSTAT_WHICH 0x080 /* Which status, 1=old 0=new */ -#define SEEQ_RSTAT_LITTLE 0x100 /* DMA is done in little endian format */ -#define SEEQ_RSTAT_SDMA 0x200 /* DMA has started */ -#define SEEQ_RSTAT_ADMA 0x400 /* DMA is active */ -#define SEEQ_RSTAT_ROVERF 0x800 /* Receive buffer overflow */ - -/* Seeq8003 receive command register */ -#define SEEQ_RCMD_RDISAB 0x000 /* Disable receiver on the Seeq8003 */ -#define SEEQ_RCMD_IOVERF 0x001 /* IRQ on buffer overflows */ -#define SEEQ_RCMD_ICRC 0x002 /* IRQ on CRC errors */ -#define SEEQ_RCMD_IDRIB 0x004 /* IRQ on dribble errors */ -#define SEEQ_RCMD_ISHORT 0x008 /* IRQ on short frames */ -#define SEEQ_RCMD_IEOF 0x010 /* IRQ on end of frame */ -#define SEEQ_RCMD_IGOOD 0x020 /* IRQ on good frames */ -#define SEEQ_RCMD_RANY 0x040 /* Receive any frame */ -#define SEEQ_RCMD_RBCAST 0x080 /* Receive broadcasts */ -#define SEEQ_RCMD_RBMCAST 0x0c0 /* Receive broadcasts/multicasts */ - -/* Seeq8003 transmit status register */ -#define SEEQ_TSTAT_UFLOW 0x001 /* Transmit buffer underflow */ -#define SEEQ_TSTAT_CLS 0x002 /* Collision detected */ -#define SEEQ_TSTAT_R16 0x004 /* Did 16 retries to tx a frame */ -#define SEEQ_TSTAT_PTRANS 0x008 /* Packet was transmitted ok */ -#define SEEQ_TSTAT_LCLS 0x010 /* Late collision occurred */ -#define SEEQ_TSTAT_WHICH 0x080 /* Which status, 1=old 0=new */ -#define SEEQ_TSTAT_TLE 0x100 /* DMA is done in little endian format */ -#define SEEQ_TSTAT_SDMA 0x200 /* DMA has started */ -#define SEEQ_TSTAT_ADMA 0x400 /* DMA is active */ - -/* Seeq8003 transmit command register */ -#define SEEQ_TCMD_RB0 0x00 /* Register bank zero w/station addr */ -#define SEEQ_TCMD_IUF 0x01 /* IRQ on tx underflow */ -#define SEEQ_TCMD_IC 0x02 /* IRQ on collisions */ -#define SEEQ_TCMD_I16 0x04 /* IRQ after 16 failed attempts to tx frame */ -#define SEEQ_TCMD_IPT 0x08 /* IRQ when packet successfully transmitted */ -#define SEEQ_TCMD_RB1 0x20 /* Register bank one w/multi-cast low byte */ -#define SEEQ_TCMD_RB2 0x40 /* Register bank two w/multi-cast high byte */ - -/* Seeq8003 control register */ -#define SEEQ_CTRL_XCNT 0x01 -#define SEEQ_CTRL_ACCNT 0x02 -#define SEEQ_CTRL_SFLAG 0x04 -#define SEEQ_CTRL_EMULTI 0x08 -#define SEEQ_CTRL_ESHORT 0x10 -#define SEEQ_CTRL_ENCARR 0x20 - -/* Seeq8003 control registers on the SGI Hollywood HPC. */ -#define SEEQ_HPIO_P1BITS 0x00000001 /* cycles to stay in P1 phase for PIO */ -#define SEEQ_HPIO_P2BITS 0x00000060 /* cycles to stay in P2 phase for PIO */ -#define SEEQ_HPIO_P3BITS 0x00000100 /* cycles to stay in P3 phase for PIO */ -#define SEEQ_HDMA_D1BITS 0x00000006 /* cycles to stay in D1 phase for DMA */ -#define SEEQ_HDMA_D2BITS 0x00000020 /* cycles to stay in D2 phase for DMA */ -#define SEEQ_HDMA_D3BITS 0x00000000 /* cycles to stay in D3 phase for DMA */ -#define SEEQ_HDMA_TIMEO 0x00030000 /* cycles for DMA timeout */ -#define SEEQ_HCTL_NORM 0x00000000 /* Normal operation mode */ -#define SEEQ_HCTL_RESET 0x00000001 /* Reset Seeq8003 and HPC interface */ -#define SEEQ_HCTL_IPEND 0x00000002 /* IRQ is pending for the chip */ -#define SEEQ_HCTL_IPG 0x00001000 /* Inter-packet gap */ -#define SEEQ_HCTL_RFIX 0x00002000 /* At rxdc, clear end-of-packet */ -#define SEEQ_HCTL_EFIX 0x00004000 /* fixes intr status bit settings */ -#define SEEQ_HCTL_IFIX 0x00008000 /* enable startup timeouts */ - -#endif /* !(_SGISEEQ_H) */ -- cgit v1.2.3