From b8589e2a8065b8e7773742b60ae96b63b757bb69 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 29 Feb 2012 22:51:32 +0100 Subject: gpio/twl: Add DT support to gpio-twl4030 driver Add the DT support for the I2C GPIO expander inside the twl4030. Note: The pdata parameters still have to be properly adapted using dedicated bindings. Signed-off-by: Benoit Cousson Acked-by: Felipe Balbi Acked-by: Grant Likely Signed-off-by: Samuel Ortiz --- .../devicetree/bindings/gpio/gpio-twl4030.txt | 23 +++++++ drivers/gpio/gpio-twl4030.c | 79 ++++++++++++++-------- 2 files changed, 73 insertions(+), 29 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-twl4030.txt diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt new file mode 100644 index 000000000000..16695d9cf1e8 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt @@ -0,0 +1,23 @@ +twl4030 GPIO controller bindings + +Required properties: +- compatible: + - "ti,twl4030-gpio" for twl4030 GPIO controller +- #gpio-cells : Should be two. + - first cell is the pin number + - second cell is used to specify optional parameters (unused) +- gpio-controller : Marks the device node as a GPIO controller. +- #interrupt-cells : Should be 2. +- interrupt-controller: Mark the device node as an interrupt controller + The first cell is the GPIO number. + The second cell is not used. + +Example: + +twl_gpio: gpio { + compatible = "ti,twl4030-gpio"; + #gpio-cells = <2>; + gpio-controller; + #interrupt-cells = <2>; + interrupt-controller; +}; diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index 49e5c6eb403a..94256fe7bf36 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include @@ -256,7 +258,8 @@ static int twl_request(struct gpio_chip *chip, unsigned offset) * and vMMC2 power supplies based on card presence. */ pdata = chip->dev->platform_data; - value |= pdata->mmc_cd & 0x03; + if (pdata) + value |= pdata->mmc_cd & 0x03; status = gpio_twl4030_write(REG_GPIO_CTRL, value); } @@ -395,6 +398,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev); static int __devinit gpio_twl4030_probe(struct platform_device *pdev) { struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; + struct device_node *node = pdev->dev.of_node; int ret, irq_base; /* maybe setup IRQs */ @@ -409,6 +413,9 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev) return irq_base; } + irq_domain_add_legacy(node, TWL4030_GPIO_MAX, irq_base, 0, + &irq_domain_simple_ops, NULL); + ret = twl4030_sih_setup(&pdev->dev, TWL4030_MODULE_GPIO, irq_base); if (ret < 0) return ret; @@ -416,40 +423,45 @@ static int __devinit gpio_twl4030_probe(struct platform_device *pdev) twl4030_gpio_irq_base = irq_base; no_irqs: - /* - * NOTE: boards may waste power if they don't set pullups - * and pulldowns correctly ... default for non-ULPI pins is - * pulldown, and some other pins may have external pullups - * or pulldowns. Careful! - */ - ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); - if (ret) - dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", - pdata->pullups, pdata->pulldowns, - ret); - - ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); - if (ret) - dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", - pdata->debounce, pdata->mmc_cd, - ret); - - twl_gpiochip.base = pdata->gpio_base; + twl_gpiochip.base = -1; twl_gpiochip.ngpio = TWL4030_GPIO_MAX; twl_gpiochip.dev = &pdev->dev; - /* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, - * is (still) clear if use_leds is set. - */ - if (pdata->use_leds) - twl_gpiochip.ngpio += 2; + if (pdata) { + twl_gpiochip.base = pdata->gpio_base; + + /* + * NOTE: boards may waste power if they don't set pullups + * and pulldowns correctly ... default for non-ULPI pins is + * pulldown, and some other pins may have external pullups + * or pulldowns. Careful! + */ + ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); + if (ret) + dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", + pdata->pullups, pdata->pulldowns, + ret); + + ret = gpio_twl4030_debounce(pdata->debounce, pdata->mmc_cd); + if (ret) + dev_dbg(&pdev->dev, "debounce %.03x %.01x --> %d\n", + pdata->debounce, pdata->mmc_cd, + ret); + + /* + * NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, + * is (still) clear if use_leds is set. + */ + if (pdata->use_leds) + twl_gpiochip.ngpio += 2; + } ret = gpiochip_add(&twl_gpiochip); if (ret < 0) { dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret); twl_gpiochip.ngpio = 0; gpio_twl4030_remove(pdev); - } else if (pdata->setup) { + } else if (pdata && pdata->setup) { int status; status = pdata->setup(&pdev->dev, @@ -467,7 +479,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev) struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; int status; - if (pdata->teardown) { + if (pdata && pdata->teardown) { status = pdata->teardown(&pdev->dev, pdata->gpio_base, TWL4030_GPIO_MAX); if (status) { @@ -488,12 +500,21 @@ static int gpio_twl4030_remove(struct platform_device *pdev) return -EIO; } +static const struct of_device_id twl_gpio_match[] = { + { .compatible = "ti,twl4030-gpio", }, + { }, +}; +MODULE_DEVICE_TABLE(of, twl_gpio_match); + /* Note: this hardware lives inside an I2C-based multi-function device. */ MODULE_ALIAS("platform:twl4030_gpio"); static struct platform_driver gpio_twl4030_driver = { - .driver.name = "twl4030_gpio", - .driver.owner = THIS_MODULE, + .driver = { + .name = "twl4030_gpio", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl_gpio_match), + }, .probe = gpio_twl4030_probe, .remove = gpio_twl4030_remove, }; -- cgit v1.2.3