From b9c61b70075c87a8612624736faf4a2de5b1ed30 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Wed, 6 May 2009 10:10:06 -0700 Subject: x86/pci: update pirq_enable_irq() to setup io apic routing So we can set io apic routing only when enabling the device irq. This is advantageous for IRQ descriptor allocation affinity: if we set up the IO-APIC entry later, we have a chance to allocate the IRQ descriptor later and know which device it is on and can set affinity accordingly. [ Impact: standardize/enhance irq-enabling sequence for mptable irqs ] Signed-off-by: Yinghai Lu Acked-by: Jesse Barnes Cc: Len Brown Cc: Andrew Morton LKML-Reference: <4A01C46E.8000501@kernel.org> Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/io_apic.c | 150 ++++++++++++++++++++--------------------- arch/x86/pci/irq.c | 84 +++++++++-------------- 2 files changed, 104 insertions(+), 130 deletions(-) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 3a68daee0d99..5d5f4120c743 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -1480,9 +1480,13 @@ static void setup_IO_APIC_irq(int apic_id, int pin, unsigned int irq, struct irq ioapic_write_entry(apic_id, pin, entry); } +static struct { + DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); +} mp_ioapic_routing[MAX_IO_APICS]; + static void __init setup_IO_APIC_irqs(void) { - int apic_id, pin, idx, irq; + int apic_id = 0, pin, idx, irq; int notcon = 0; struct irq_desc *desc; struct irq_cfg *cfg; @@ -1490,48 +1494,53 @@ static void __init setup_IO_APIC_irqs(void) apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); - for (apic_id = 0; apic_id < nr_ioapics; apic_id++) { - for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) { - - idx = find_irq_entry(apic_id, pin, mp_INT); - if (idx == -1) { - if (!notcon) { - notcon = 1; - apic_printk(APIC_VERBOSE, - KERN_DEBUG " %d-%d", - mp_ioapics[apic_id].apicid, pin); - } else - apic_printk(APIC_VERBOSE, " %d-%d", - mp_ioapics[apic_id].apicid, pin); - continue; - } - if (notcon) { - apic_printk(APIC_VERBOSE, - " (apicid-pin) not connected\n"); - notcon = 0; - } +#ifdef CONFIG_ACPI + if (!acpi_disabled && acpi_ioapic) { + apic_id = mp_find_ioapic(0); + if (apic_id < 0) + apic_id = 0; + } +#endif - irq = pin_2_irq(idx, apic_id, pin); + for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) { + idx = find_irq_entry(apic_id, pin, mp_INT); + if (idx == -1) { + if (!notcon) { + notcon = 1; + apic_printk(APIC_VERBOSE, + KERN_DEBUG " %d-%d", + mp_ioapics[apic_id].apicid, pin); + } else + apic_printk(APIC_VERBOSE, " %d-%d", + mp_ioapics[apic_id].apicid, pin); + continue; + } + if (notcon) { + apic_printk(APIC_VERBOSE, + " (apicid-pin) not connected\n"); + notcon = 0; + } - /* - * Skip the timer IRQ if there's a quirk handler - * installed and if it returns 1: - */ - if (apic->multi_timer_check && - apic->multi_timer_check(apic_id, irq)) - continue; + irq = pin_2_irq(idx, apic_id, pin); - desc = irq_to_desc_alloc_node(irq, node); - if (!desc) { - printk(KERN_INFO "can not get irq_desc for %d\n", irq); - continue; - } - cfg = desc->chip_data; - add_pin_to_irq_node(cfg, node, apic_id, pin); + /* + * Skip the timer IRQ if there's a quirk handler + * installed and if it returns 1: + */ + if (apic->multi_timer_check && + apic->multi_timer_check(apic_id, irq)) + continue; - setup_IO_APIC_irq(apic_id, pin, irq, desc, - irq_trigger(idx), irq_polarity(idx)); + desc = irq_to_desc_alloc_node(irq, node); + if (!desc) { + printk(KERN_INFO "can not get irq_desc for %d\n", irq); + continue; } + cfg = desc->chip_data; + add_pin_to_irq_node(cfg, node, apic_id, pin); + set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed); + setup_IO_APIC_irq(apic_id, pin, irq, desc, + irq_trigger(idx), irq_polarity(idx)); } if (notcon) @@ -3876,10 +3885,6 @@ static int __io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, in return 0; } -static struct { - DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); -} mp_ioapic_routing[MAX_IO_APICS]; - int io_apic_set_pci_routing(struct device *dev, int ioapic, int pin, int irq, int triggering, int polarity) { @@ -4023,51 +4028,44 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) #ifdef CONFIG_SMP void __init setup_ioapic_dest(void) { - int pin, ioapic, irq, irq_entry; + int pin, ioapic = 0, irq, irq_entry; struct irq_desc *desc; - struct irq_cfg *cfg; const struct cpumask *mask; if (skip_ioapic_setup == 1) return; - for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { - for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { - irq_entry = find_irq_entry(ioapic, pin, mp_INT); - if (irq_entry == -1) - continue; - irq = pin_2_irq(irq_entry, ioapic, pin); - - /* setup_IO_APIC_irqs could fail to get vector for some device - * when you have too many devices, because at that time only boot - * cpu is online. - */ - desc = irq_to_desc(irq); - cfg = desc->chip_data; - if (!cfg->vector) { - setup_IO_APIC_irq(ioapic, pin, irq, desc, - irq_trigger(irq_entry), - irq_polarity(irq_entry)); - continue; +#ifdef CONFIG_ACPI + if (!acpi_disabled && acpi_ioapic) { + ioapic = mp_find_ioapic(0); + if (ioapic < 0) + ioapic = 0; + } +#endif - } + for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { + irq_entry = find_irq_entry(ioapic, pin, mp_INT); + if (irq_entry == -1) + continue; + irq = pin_2_irq(irq_entry, ioapic, pin); - /* - * Honour affinities which have been set in early boot - */ - if (desc->status & - (IRQ_NO_BALANCING | IRQ_AFFINITY_SET)) - mask = desc->affinity; - else - mask = apic->target_cpus(); + desc = irq_to_desc(irq); - if (intr_remapping_enabled) - set_ir_ioapic_affinity_irq_desc(desc, mask); - else - set_ioapic_affinity_irq_desc(desc, mask); - } + /* + * Honour affinities which have been set in early boot + */ + if (desc->status & + (IRQ_NO_BALANCING | IRQ_AFFINITY_SET)) + mask = desc->affinity; + else + mask = apic->target_cpus(); + if (intr_remapping_enabled) + set_ir_ioapic_affinity_irq_desc(desc, mask); + else + set_ioapic_affinity_irq_desc(desc, mask); } + } #endif diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index a2f6bde9c4eb..2f3e192615c0 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -889,6 +889,9 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign) return 0; } + if (io_apic_assign_pci_irqs) + return 0; + /* Find IRQ routing entry */ if (!pirq_table) @@ -1039,63 +1042,15 @@ static void __init pcibios_fixup_irqs(void) pirq_penalty[dev->irq]++; } + if (io_apic_assign_pci_irqs) + return; + dev = NULL; while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); if (!pin) continue; -#ifdef CONFIG_X86_IO_APIC - /* - * Recalculate IRQ numbers if we use the I/O APIC. - */ - if (io_apic_assign_pci_irqs) { - int irq; - int ioapic = -1, ioapic_pin = -1; - int triggering, polarity; - - /* - * interrupt pins are numbered starting from 1 - */ - irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, - PCI_SLOT(dev->devfn), pin - 1, - &ioapic, &ioapic_pin, - &triggering, &polarity); - /* - * Busses behind bridges are typically not listed in the - * MP-table. In this case we have to look up the IRQ - * based on the parent bus, parent slot, and pin number. - * The SMP code detects such bridged busses itself so we - * should get into this branch reliably. - */ - if (irq < 0 && dev->bus->parent) { - /* go back to the bridge */ - struct pci_dev *bridge = dev->bus->self; - int bus; - - pin = pci_swizzle_interrupt_pin(dev, pin); - bus = bridge->bus->number; - irq = IO_APIC_get_PCI_irq_vector(bus, - PCI_SLOT(bridge->devfn), - pin - 1, - &ioapic, &ioapic_pin, - &triggering, &polarity); - if (irq >= 0) - dev_warn(&dev->dev, - "using bridge %s INT %c to " - "get IRQ %d\n", - pci_name(bridge), - 'A' + pin - 1, irq); - } - if (irq >= 0) { - dev_info(&dev->dev, - "PCI->APIC IRQ transform: INT %c " - "-> IRQ %d\n", - 'A' + pin - 1, irq); - dev->irq = irq; - } - } -#endif /* * Still no IRQ? Try to lookup one... */ @@ -1190,6 +1145,19 @@ int __init pcibios_irq_init(void) pcibios_enable_irq = pirq_enable_irq; pcibios_fixup_irqs(); + + if (io_apic_assign_pci_irqs && pci_routeirq) { + struct pci_dev *dev = NULL; + /* + * PCI IRQ routing is set up by pci_enable_device(), but we + * also do it here in case there are still broken drivers that + * don't use pci_enable_device(). + */ + printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n"); + for_each_pci_dev(dev) + pirq_enable_irq(dev); + } + return 0; } @@ -1220,13 +1188,17 @@ void pcibios_penalize_isa_irq(int irq, int active) static int pirq_enable_irq(struct pci_dev *dev) { u8 pin; - struct pci_dev *temp_dev; pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) { + if (pin && !pcibios_lookup_irq(dev, 1)) { char *msg = ""; + if (!io_apic_assign_pci_irqs && dev->irq) + return 0; + if (io_apic_assign_pci_irqs) { +#ifdef CONFIG_X86_IO_APIC + struct pci_dev *temp_dev; int irq; int ioapic = -1, ioapic_pin = -1; int triggering, polarity; @@ -1261,12 +1233,16 @@ static int pirq_enable_irq(struct pci_dev *dev) } dev = temp_dev; if (irq >= 0) { + io_apic_set_pci_routing(&dev->dev, ioapic, + ioapic_pin, irq, + triggering, polarity); + dev->irq = irq; dev_info(&dev->dev, "PCI->APIC IRQ transform: " "INT %c -> IRQ %d\n", 'A' + pin - 1, irq); - dev->irq = irq; return 0; } else msg = "; probably buggy MP table"; +#endif } else if (pci_probe & PCI_BIOS_IRQ_SCAN) msg = ""; else -- cgit v1.2.3