From a73fa3690a1f3014d6677e368dce4e70767a6ba2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 2 May 2025 13:10:35 +0200 Subject: spi: loopback-test: Do not split 1024-byte hexdumps spi_test_print_hex_dump() prints buffers holding less than 1024 bytes in full. Larger buffers are truncated: only the first 512 and the last 512 bytes are printed, separated by a truncation message. The latter is confusing in case the buffer holds exactly 1024 bytes, as all data is printed anyway. Fix this by printing buffers holding up to and including 1024 bytes in full. Fixes: 84e0c4e5e2c4ef42 ("spi: add loopback test driver to allow for spi_master regression tests") Signed-off-by: Geert Uytterhoeven Link: https://patch.msgid.link/37ee1bc90c6554c9347040adabf04188c8f704aa.1746184171.git.geert+renesas@glider.be Signed-off-by: Mark Brown --- drivers/spi/spi-loopback-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-loopback-test.c b/drivers/spi/spi-loopback-test.c index 31a878d9458d..7740f94847a8 100644 --- a/drivers/spi/spi-loopback-test.c +++ b/drivers/spi/spi-loopback-test.c @@ -420,7 +420,7 @@ MODULE_LICENSE("GPL"); static void spi_test_print_hex_dump(char *pre, const void *ptr, size_t len) { /* limit the hex_dump */ - if (len < 1024) { + if (len <= 1024) { print_hex_dump(KERN_INFO, pre, DUMP_PREFIX_OFFSET, 16, 1, ptr, len, 0); -- cgit v1.2.3 From e979a7c79fbc706f6dac913af379ef4caa04d3d5 Mon Sep 17 00:00:00 2001 From: Aaron Kling Date: Tue, 6 May 2025 13:36:59 -0500 Subject: spi: tegra114: Use value to check for invalid delays A delay unit of 0 is a valid entry, thus it is not valid to check for unused delays. Instead, check the value field; if that is zero, the given delay is unset. Fixes: 4426e6b4ecf6 ("spi: tegra114: Don't fail set_cs_timing when delays are zero") Cc: stable@vger.kernel.org Signed-off-by: Aaron Kling Reviewed-by: Jon Hunter Link: https://patch.msgid.link/20250506-spi-tegra114-fixup-v1-1-136dc2f732f3@gmail.com Signed-off-by: Mark Brown --- drivers/spi/spi-tegra114.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c index 2a8bb798e95b..795a8482c2c7 100644 --- a/drivers/spi/spi-tegra114.c +++ b/drivers/spi/spi-tegra114.c @@ -728,9 +728,9 @@ static int tegra_spi_set_hw_cs_timing(struct spi_device *spi) u32 inactive_cycles; u8 cs_state; - if ((setup->unit && setup->unit != SPI_DELAY_UNIT_SCK) || - (hold->unit && hold->unit != SPI_DELAY_UNIT_SCK) || - (inactive->unit && inactive->unit != SPI_DELAY_UNIT_SCK)) { + if ((setup->value && setup->unit != SPI_DELAY_UNIT_SCK) || + (hold->value && hold->unit != SPI_DELAY_UNIT_SCK) || + (inactive->value && inactive->unit != SPI_DELAY_UNIT_SCK)) { dev_err(&spi->dev, "Invalid delay unit %d, should be SPI_DELAY_UNIT_SCK\n", SPI_DELAY_UNIT_SCK); -- cgit v1.2.3 From fb98bd0a13de2c9d96cb5c00c81b5ca118ac9d71 Mon Sep 17 00:00:00 2001 From: Alessandro Grassi Date: Fri, 2 May 2025 11:55:20 +0200 Subject: spi: spi-sun4i: fix early activation The SPI interface is activated before the CPOL setting is applied. In that moment, the clock idles high and CS goes low. After a short delay, CPOL and other settings are applied, which may cause the clock to change state and idle low. This transition is not part of a clock cycle, and it can confuse the receiving device. To prevent this unexpected transition, activate the interface while CPOL and the other settings are being applied. Signed-off-by: Alessandro Grassi Link: https://patch.msgid.link/20250502095520.13825-1-alessandro.grassi@mailbox.org Signed-off-by: Mark Brown --- drivers/spi/spi-sun4i.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c index f89826d7dc49..aa92fd5a35a9 100644 --- a/drivers/spi/spi-sun4i.c +++ b/drivers/spi/spi-sun4i.c @@ -264,6 +264,9 @@ static int sun4i_spi_transfer_one(struct spi_controller *host, else reg |= SUN4I_CTL_DHB; + /* Now that the settings are correct, enable the interface */ + reg |= SUN4I_CTL_ENABLE; + sun4i_spi_write(sspi, SUN4I_CTL_REG, reg); /* Ensure that we have a parent clock fast enough */ @@ -404,7 +407,7 @@ static int sun4i_spi_runtime_resume(struct device *dev) } sun4i_spi_write(sspi, SUN4I_CTL_REG, - SUN4I_CTL_ENABLE | SUN4I_CTL_MASTER | SUN4I_CTL_TP); + SUN4I_CTL_MASTER | SUN4I_CTL_TP); return 0; -- cgit v1.2.3