From 0ed797f70567dedceb26afd01f0cafd7b785f483 Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Fri, 10 Feb 2017 11:22:38 +0900 Subject: arm64: dts: exynos: Enable ir-spi in the TM2 and TM2E boards Add the device tree node for the ir-spi driver which enables the IR LED for remote controlling. This patch sets first the GPR3[3] gpio line as a regulator-fixed for enabling an external regulator which powers the IR LED. Removes also the default assignment of GPG3[7] related to the MOSI line of the SPI3 bus. Signed-off-by: Andi Shyti Reviewed-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski --- .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 26 +++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 098ad557fee3..4df6b57a0a68 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -106,6 +106,13 @@ }; }; + irda_regulator: irda-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>; + regulator-name = "irda_regulator"; + }; + sound { compatible = "samsung,tm2-audio"; audio-codec = <&wm5110>; @@ -1074,7 +1081,6 @@ PIN(INPUT, gpg3-0, DOWN, FAST_SR1); PIN(INPUT, gpg3-1, DOWN, FAST_SR1); PIN(INPUT, gpg3-5, DOWN, FAST_SR1); - PIN(INPUT, gpg3-7, DOWN, FAST_SR1); }; }; @@ -1152,6 +1158,24 @@ }; }; +&spi_3 { + status = "okay"; + no-cs-readback; + + irled@0 { + compatible = "ir-spi-led"; + reg = <0x0>; + spi-max-frequency = <5000000>; + power-supply = <&irda_regulator>; + duty-cycle = <60>; + led-active-low; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; +}; + &timer { clock-frequency = <24000000>; }; -- cgit v1.2.3 From 2b17d2f8bc55e0abe5f03fda065d73cfcf465e5c Mon Sep 17 00:00:00 2001 From: Andi Shyti Date: Fri, 10 Feb 2017 11:17:21 +0900 Subject: arm64: dts: exynos: Add stmfts touchscreen node for TM2 and TM2E TM2 and TM2E devices are provided with a ST-Microelectronics Finger Tip S device with small differences: - screen size - TM2E uses the stmfts also as a touchkey for "back" and "menu" In this commit the initial value of the interrupt line is set to EXYNOS_PIN_PULL_UP as the interrupt is triggered when the line goes down. Signed-off-by: Andi Shyti Reviewed-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 15 ++++++++++++++- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 5 +++++ arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 7 +++++++ 3 files changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 4df6b57a0a68..fef0ba77f7f7 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -756,6 +756,19 @@ }; }; +&hsi2c_5 { + status = "okay"; + + stmfts: touchscreen@49 { + compatible = "st,stmfts"; + reg = <0x49>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + }; +}; + &hsi2c_7 { status = "okay"; @@ -901,7 +914,7 @@ PIN(INPUT, gpa0-7, NONE, FAST_SR1); PIN(INPUT, gpa1-0, UP, FAST_SR1); - PIN(INPUT, gpa1-1, NONE, FAST_SR1); + PIN(INPUT, gpa1-1, UP, FAST_SR1); PIN(INPUT, gpa1-2, NONE, FAST_SR1); PIN(INPUT, gpa1-3, DOWN, FAST_SR1); PIN(INPUT, gpa1-4, DOWN, FAST_SR1); diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index dea0a6f5bc18..75274b3afbd3 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -76,3 +76,8 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; + +&stmfts { + touchscreen-size-x = <1439>; + touchscreen-size-y = <2559>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 7891a31adc17..694717ade927 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -63,3 +63,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + +&stmfts { + touchscreen-size-x = <1599>; + touchscreen-size-y = <2559>; + touch-key-connected; + ledvdd-supply = <&ldo33_reg>; +}; -- cgit v1.2.3 From 5be7ade3020490b891fcdef1c92ca28fa0983ab7 Mon Sep 17 00:00:00 2001 From: Hyungwon Hwang Date: Wed, 8 Mar 2017 10:42:37 +0900 Subject: arm64: dts: exynos: Add support for S6E3HA2 panel device on TM2 board This patch add the panel device tree node for S6E3HA2 display controller to TM2 dts. Signed-off-by: Hyungwon Hwang Signed-off-by: Andrzej Hajda Signed-off-by: Chanwoo Choi Signed-off-by: Hoegeun Kwon Tested-by: Chanwoo Choi Reviewed-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index 75274b3afbd3..3ff95277a8ec 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -52,6 +52,18 @@ assigned-clock-rates = <250000000>, <400000000>; }; +&dsi { + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; + }; +}; + &hsi2c_9 { status = "okay"; -- cgit v1.2.3 From e3c07546747cdec07ff15c984bc6cebc9c9f788c Mon Sep 17 00:00:00 2001 From: Hoegeun Kwon Date: Wed, 8 Mar 2017 13:54:08 +0900 Subject: arm64: dts: exynos: Add the burst and esc clock frequency properties to DSI node Add the burst and esc clock frequency properties to the parent (DSI node). Currently the clock is parsed from the port node, while it should be taken from the dsi node. Signed-off-by: Hoegeun Kwon Reviewed-by: Andrzej Hajda Reviewed-by: Andi Shyti Signed-off-by: Krzysztof Kozlowski --- arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index fef0ba77f7f7..e2b0da2c0bc7 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -305,6 +305,8 @@ status = "okay"; vddcore-supply = <&ldo6_reg>; vddio-supply = <&ldo7_reg>; + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; samsung,pll-clock-frequency = <24000000>; pinctrl-names = "default"; pinctrl-0 = <&te_irq>; -- cgit v1.2.3