From ffd638e0e613578fbe82d5f2d9c1e5ec503a3a2b Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 18 Jul 2011 11:03:05 -0300 Subject: [media] v4l: Move event documentation from SUBSCRIBE_EVENT to DQEVENT Move documentation of structures used in DQEVENT from SUBSCRIBE_EVENT to DQEVENT. Signed-off-by: Sakari Ailus Acked-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/vidioc-dqevent.xml | 107 +++++++++++++++++++++ .../DocBook/media/v4l/vidioc-subscribe-event.xml | 107 --------------------- 2 files changed, 107 insertions(+), 107 deletions(-) (limited to 'Documentation/DocBook/media') diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml index 7769642ee431..5200b6874654 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml @@ -135,6 +135,113 @@ + + struct <structname>v4l2_event_vsync</structname> + + &cs-str; + + + __u8 + field + The upcoming field. See &v4l2-field;. + + + +
+ + + struct <structname>v4l2_event_ctrl</structname> + + &cs-str; + + + __u32 + changes + + A bitmask that tells what has changed. See . + + + __u32 + type + + The type of the control. See &v4l2-ctrl-type;. + + + union (anonymous) + + + + + + + __s32 + value + The 32-bit value of the control for 32-bit control types. + This is 0 for string controls since the value of a string + cannot be passed using &VIDIOC-DQEVENT;. + + + + __s64 + value64 + The 64-bit value of the control for 64-bit control types. + + + __u32 + flags + + The control flags. See . + + + __s32 + minimum + + The minimum value of the control. See &v4l2-queryctrl;. + + + __s32 + maximum + + The maximum value of the control. See &v4l2-queryctrl;. + + + __s32 + step + + The step value of the control. See &v4l2-queryctrl;. + + + __s32 + default_value + + The default value value of the control. See &v4l2-queryctrl;. + + + +
+ + + Changes + + &cs-def; + + + V4L2_EVENT_CTRL_CH_VALUE + 0x0001 + This control event was triggered because the value of the control + changed. Special case: if a button control is pressed, then this + event is sent as well, even though there is not explicit value + associated with a button control. + + + V4L2_EVENT_CTRL_CH_FLAGS + 0x0002 + This control event was triggered because the control flags + changed. + + + +
&return-value; diff --git a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml index 69c0d8a2a3d2..275be9689d88 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml @@ -183,113 +183,6 @@ - - struct <structname>v4l2_event_vsync</structname> - - &cs-str; - - - __u8 - field - The upcoming field. See &v4l2-field;. - - - -
- - - struct <structname>v4l2_event_ctrl</structname> - - &cs-str; - - - __u32 - changes - - A bitmask that tells what has changed. See . - - - __u32 - type - - The type of the control. See &v4l2-ctrl-type;. - - - union (anonymous) - - - - - - - __s32 - value - The 32-bit value of the control for 32-bit control types. - This is 0 for string controls since the value of a string - cannot be passed using &VIDIOC-DQEVENT;. - - - - __s64 - value64 - The 64-bit value of the control for 64-bit control types. - - - __u32 - flags - - The control flags. See . - - - __s32 - minimum - - The minimum value of the control. See &v4l2-queryctrl;. - - - __s32 - maximum - - The maximum value of the control. See &v4l2-queryctrl;. - - - __s32 - step - - The step value of the control. See &v4l2-queryctrl;. - - - __s32 - default_value - - The default value value of the control. See &v4l2-queryctrl;. - - - -
- - - Changes - - &cs-def; - - - V4L2_EVENT_CTRL_CH_VALUE - 0x0001 - This control event was triggered because the value of the control - changed. Special case: if a button control is pressed, then this - event is sent as well, even though there is not explicit value - associated with a button control. - - - V4L2_EVENT_CTRL_CH_FLAGS - 0x0002 - This control event was triggered because the control flags - changed. - - - -
&return-value; -- cgit v1.2.3 From eab00a0da292fa7118aaf20da78e834866de00ae Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 18 Jul 2011 08:40:03 -0300 Subject: [media] v4l: events: Define V4L2_EVENT_FRAME_SYNC Define a frame sync event to tell user space when the reception of a frame starts. Signed-off-by: Sakari Ailus Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/vidioc-dqevent.xml | 22 ++++++++++++++++++++++ .../DocBook/media/v4l/vidioc-subscribe-event.xml | 16 ++++++++++++++++ 2 files changed, 38 insertions(+) (limited to 'Documentation/DocBook/media') diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml index 5200b6874654..e8714aa16433 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml @@ -86,6 +86,12 @@ Event data for event V4L2_EVENT_CTRL. + + + &v4l2-event-frame-sync; + frame + Event data for event V4L2_EVENT_FRAME_SYNC. + __u8 @@ -220,6 +226,22 @@ + + struct <structname>v4l2_event_frame_sync</structname> + + &cs-str; + + + __u32 + frame_sequence + + The sequence number of the frame being received. + + + + +
+ Changes diff --git a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml index 275be9689d88..5c70b616d818 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml @@ -138,6 +138,22 @@ field of the oldest event. + + V4L2_EVENT_FRAME_SYNC + 4 + + Triggered immediately when the reception of a + frame has begun. This event has a + &v4l2-event-frame-sync; associated with it. + + If the hardware needs to be stopped in the case of a + buffer underrun it might not be able to generate this event. + In such cases the frame_sequence + field in &v4l2-event-frame-sync; will not be incremented. This + causes two consecutive frame sequence numbers to have n times + frame interval in between them. + + V4L2_EVENT_PRIVATE_START 0x08000000 -- cgit v1.2.3 From 83dc314bea4d701e3e5fa048314dfb02f7ef769c Mon Sep 17 00:00:00 2001 From: Andreas Oberritter Date: Mon, 8 Aug 2011 11:54:35 -0300 Subject: [media] DVB: Add SYS_TURBO for north american turbo code FEC Signed-off-by: Andreas Oberritter Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/dvb/dvbproperty.xml | 1 + 1 file changed, 1 insertion(+) (limited to 'Documentation/DocBook/media') diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index 207e1a5bf8f0..75bea04e02bb 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -352,6 +352,7 @@ typedef enum fe_delivery_system { SYS_CMMB, SYS_DAB, SYS_DVBT2, + SYS_TURBO, } fe_delivery_system_t; -- cgit v1.2.3 From 7fc9da2a8f721efe9813fdff5d95a516999615a0 Mon Sep 17 00:00:00 2001 From: Andreas Oberritter Date: Sat, 3 Sep 2011 14:26:33 -0300 Subject: [media] DVB: improve documentation for satellite delivery systems - Move voltage and tone to DVB-S. - Add turbo code. - In DVB-S2 and turbo code sections, refer to DVB-S, as both are extensions to DVB-S. - Add modulation to DVB-S2. Signed-off-by: Andreas Oberritter Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/dvb/dvbproperty.xml | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-) (limited to 'Documentation/DocBook/media') diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index 75bea04e02bb..3bc8a61efe30 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -810,6 +810,8 @@ typedef enum fe_hierarchy { DTV_INVERSION DTV_SYMBOL_RATE DTV_INNER_FEC + DTV_VOLTAGE + DTV_TONE Future implementations might add those two missing parameters: @@ -819,25 +821,18 @@ typedef enum fe_hierarchy {
DVB-S2 delivery system - The following parameters are valid for DVB-S2: + In addition to all parameters valid for DVB-S, DVB-S2 supports the following parameters: - DTV_API_VERSION - DTV_DELIVERY_SYSTEM - DTV_TUNE - DTV_CLEAR - DTV_FREQUENCY - DTV_INVERSION - DTV_SYMBOL_RATE - DTV_INNER_FEC - DTV_VOLTAGE - DTV_TONE + DTV_MODULATION DTV_PILOT DTV_ROLLOFF - Future implementations might add those two missing parameters: +
+
+ Turbo code delivery system + In addition to all parameters valid for DVB-S, turbo code supports the following parameters: - DTV_DISEQC_MASTER - DTV_DISEQC_SLAVE_REPLY + DTV_MODULATION
-- cgit v1.2.3 From 6fb2bdfa068676f436fd333c460549ed64549c5e Mon Sep 17 00:00:00 2001 From: Andreas Oberritter Date: Sat, 3 Sep 2011 14:26:34 -0300 Subject: [media] DVB: Change API version in documentation: 3 -> 5.4 Signed-off-by: Andreas Oberritter Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/dvb/intro.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook/media') diff --git a/Documentation/DocBook/media/dvb/intro.xml b/Documentation/DocBook/media/dvb/intro.xml index c75dc7cc3e9b..170064a3dc8f 100644 --- a/Documentation/DocBook/media/dvb/intro.xml +++ b/Documentation/DocBook/media/dvb/intro.xml @@ -205,7 +205,7 @@ a partial path like: additional include file linux/dvb/version.h exists, which defines the constant DVB_API_VERSION. This document -describes DVB_API_VERSION 3. +describes DVB_API_VERSION 5.4.
-- cgit v1.2.3 From 74a45790861f659058e8f8b565d98e5a1fdd8440 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 26 Aug 2011 07:31:13 -0300 Subject: [media] videodev2.h: add V4L2_CTRL_FLAG_VOLATILE Add a new VOLATILE control flag that is set for volatile controls. That way applications know whether the value of the control is volatile (i.e. can change continuously) or not. Until now this was an internal property, but it is useful to know in userspace as well. A typical use case is the gain value when autogain is on. In that case the hardware will continuously adjust the gain based various environmental factors. This patch just adds and documents the flag, it's not yet used. Signed-off-by: Hans Verkuil Acked-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/compat.xml | 8 ++++++++ Documentation/DocBook/media/v4l/v4l2.xml | 9 ++++++++- Documentation/DocBook/media/v4l/vidioc-queryctrl.xml | 9 +++++++++ 3 files changed, 25 insertions(+), 1 deletion(-) (limited to 'Documentation/DocBook/media') diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index ce1004a7da52..91410b6e7e08 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2370,6 +2370,14 @@ that used it. It was originally scheduled for removal in 2.6.35. +
+ V4L2 in Linux 3.2 + + + V4L2_CTRL_FLAG_VOLATILE was added to signal volatile controls to userspace. + + +
Relation of V4L2 to other Linux multimedia APIs diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index 0d05e8747c12..40132c277647 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -127,6 +127,13 @@ structs, ioctls) must be noted in more detail in the history chapter (compat.xml), along with the possible impact on existing drivers and applications. --> + + 3.2 + 2011-08-26 + hv + Added V4L2_CTRL_FLAG_VOLATILE. + + 3.1 2011-06-27 @@ -410,7 +417,7 @@ and discussions on the V4L mailing list. Video for Linux Two API Specification - Revision 3.1 + Revision 3.2 &sub-common; diff --git a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml index 677ea646c29f..0ac0057a51c4 100644 --- a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml +++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml @@ -406,6 +406,15 @@ flag is typically present for relative controls or action controls where writing a value will cause the device to carry out a given action (⪚ motor control) but no meaningful value can be returned. + + V4L2_CTRL_FLAG_VOLATILE + 0x0080 + This control is volatile, which means that the value of the control +changes continuously. A typical example would be the current gain value if the device +is in auto-gain mode. In such a case the hardware calculates the gain value based on +the lighting conditions which can change over time. Note that setting a new value for +a volatile control will have no effect. The new value will just be ignored. +
-- cgit v1.2.3 From 446b792c6bd87de4565ba200b75a708b4c575a06 Mon Sep 17 00:00:00 2001 From: Jonghun Han Date: Mon, 26 Sep 2011 01:14:04 -0300 Subject: [media] media: DocBook: Fix trivial typo in Sub-device Interface When satisfied with the try results, applications can set the active formats by setting the which argument to V4L2_SUBDEV_FORMAT_ACTIVE not V4L2_SUBDEV_FORMAT_TRY. Signed-off-by: Jonghun Han Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/dev-subdev.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook/media') diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml index 05c8fefcbcbe..0916a7343a16 100644 --- a/Documentation/DocBook/media/v4l/dev-subdev.xml +++ b/Documentation/DocBook/media/v4l/dev-subdev.xml @@ -266,7 +266,7 @@ When satisfied with the try results, applications can set the active formats by setting the which argument to - V4L2_SUBDEV_FORMAT_TRY. Active formats are changed + V4L2_SUBDEV_FORMAT_ACTIVE. Active formats are changed exactly as try formats by drivers. To avoid modifying the hardware state during format negotiation, applications should negotiate try formats first and then modify the active settings using the try formats returned during -- cgit v1.2.3 From 55093284fb6f9009a339e522773417bdd54ec144 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 28 Sep 2011 08:10:58 -0300 Subject: [media] V4L: document the new VIDIOC_CREATE_BUFS and VIDIOC_PREPARE_BUF ioctl()s [mchehab@redhat.com: remove emacs format crap at the end of the new files] Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/compat.xml | 3 + Documentation/DocBook/media/v4l/io.xml | 27 ++++ Documentation/DocBook/media/v4l/v4l2.xml | 2 + .../DocBook/media/v4l/vidioc-create-bufs.xml | 139 +++++++++++++++++++++ .../DocBook/media/v4l/vidioc-prepare-buf.xml | 88 +++++++++++++ 5 files changed, 259 insertions(+) create mode 100644 Documentation/DocBook/media/v4l/vidioc-create-bufs.xml create mode 100644 Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml (limited to 'Documentation/DocBook/media') diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index 91410b6e7e08..b68698f96e7f 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2486,6 +2486,9 @@ ioctls. Flash API. + + &VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls. + diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index c57d1ec6291c..3f47df1aa54a 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -927,6 +927,33 @@ ioctl is called. Applications set or clear this flag before calling the VIDIOC_QBUF ioctl. + + V4L2_BUF_FLAG_PREPARED + 0x0400 + The buffer has been prepared for I/O and can be queued by the +application. Drivers set or clear this flag when the +VIDIOC_QUERYBUF, VIDIOC_PREPARE_BUF, VIDIOC_QBUF or VIDIOC_DQBUF ioctl is called. + + + V4L2_BUF_FLAG_NO_CACHE_INVALIDATE + 0x0400 + Caches do not have to be invalidated for this buffer. +Typically applications shall use this flag if the data captured in the buffer +is not going to be touched by the CPU, instead the buffer will, probably, be +passed on to a DMA-capable hardware unit for further processing or output. + + + + V4L2_BUF_FLAG_NO_CACHE_CLEAN + 0x0800 + Caches do not have to be cleaned for this buffer. +Typically applications shall use this flag for output buffers if the data +in this buffer has not been created by the CPU but by some DMA-capable unit, +in which case caches have not been used. + diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index 40132c277647..2ab365c10fb9 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -469,6 +469,7 @@ and discussions on the V4L mailing list. &sub-close; &sub-ioctl; + &sub-create-bufs; &sub-cropcap; &sub-dbg-g-chip-ident; &sub-dbg-g-register; @@ -511,6 +512,7 @@ and discussions on the V4L mailing list. &sub-queryctrl; &sub-query-dv-preset; &sub-querystd; + &sub-prepare-buf; &sub-reqbufs; &sub-s-hw-freq-seek; &sub-streamon; diff --git a/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml new file mode 100644 index 000000000000..73ae8a6cd004 --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-create-bufs.xml @@ -0,0 +1,139 @@ + + + ioctl VIDIOC_CREATE_BUFS + &manvol; + + + + VIDIOC_CREATE_BUFS + Create buffers for Memory Mapped or User Pointer I/O + + + + + + int ioctl + int fd + int request + struct v4l2_create_buffers *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_CREATE_BUFS + + + + argp + + + + + + + + + Description + + This ioctl is used to create buffers for memory +mapped or user pointer +I/O. It can be used as an alternative or in addition to the +VIDIOC_REQBUFS ioctl, when a tighter control over buffers +is required. This ioctl can be called multiple times to create buffers of +different sizes. + + To allocate device buffers applications initialize relevant fields of +the v4l2_create_buffers structure. They set the +type field in the +v4l2_format structure, embedded in this +structure, to the respective stream or buffer type. +count must be set to the number of required buffers. +memory specifies the required I/O method. The +format field shall typically be filled in using +either the VIDIOC_TRY_FMT or +VIDIOC_G_FMT ioctl(). Additionally, applications can adjust +sizeimage fields to fit their specific needs. The +reserved array must be zeroed. + + When the ioctl is called with a pointer to this structure the driver +will attempt to allocate up to the requested number of buffers and store the +actual number allocated and the starting index in the +count and the index fields +respectively. On return count can be smaller than +the number requested. The driver may also increase buffer sizes if required, +however, it will not update sizeimage field values. +The user has to use VIDIOC_QUERYBUF to retrieve that +information. + + + struct <structname>v4l2_create_buffers</structname> + + &cs-str; + + + __u32 + index + The starting buffer index, returned by the driver. + + + __u32 + count + The number of buffers requested or granted. + + + &v4l2-memory; + memory + Applications set this field to +V4L2_MEMORY_MMAP or +V4L2_MEMORY_USERPTR. + + + &v4l2-format; + format + Filled in by the application, preserved by the driver. + + + __u32 + reserved[8] + A place holder for future extensions. + + + +
+ + + + &return-value; + + + + ENOMEM + + No memory to allocate buffers for memory +mapped I/O. + + + + EINVAL + + The buffer type (type field) or the +requested I/O method (memory) is not +supported. + + + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml new file mode 100644 index 000000000000..7bde698760e4 --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-prepare-buf.xml @@ -0,0 +1,88 @@ + + + ioctl VIDIOC_PREPARE_BUF + &manvol; + + + + VIDIOC_PREPARE_BUF + Prepare a buffer for I/O + + + + + + int ioctl + int fd + int request + struct v4l2_buffer *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_PREPARE_BUF + + + + argp + + + + + + + + + Description + + Applications can optionally call the +VIDIOC_PREPARE_BUF ioctl to pass ownership of the buffer +to the driver before actually enqueuing it, using the +VIDIOC_QBUF ioctl, and to prepare it for future I/O. +Such preparations may include cache invalidation or cleaning. Performing them +in advance saves time during the actual I/O. In case such cache operations are +not required, the application can use one of +V4L2_BUF_FLAG_NO_CACHE_INVALIDATE and +V4L2_BUF_FLAG_NO_CACHE_CLEAN flags to skip the respective +step. + + The v4l2_buffer structure is +specified in . + + + + &return-value; + + + + EBUSY + + File I/O is in progress. + + + + EINVAL + + The buffer type is not +supported, or the index is out of bounds, +or no buffers have been allocated yet, or the +userptr or +length are invalid. + + + + + -- cgit v1.2.3 From d26a6635b24210791cf4b71fd861738270c8cc3c Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sun, 4 Sep 2011 19:08:54 -0300 Subject: [media] v4l: Add AUTO option for the V4L2_CID_POWER_LINE_FREQUENCY control V4L2_CID_POWER_LINE_FREQUENCY control allows applications to instruct a driver what is the power line frequency so an appropriate filter can be used by the device to cancel flicker by compensating the light intensity ripple. Currently in the menu we have entries for 50 Hz and 60 Hz and for entirely disabling the anti-flicker filter. However some devices are capable of automatically detecting the frequency, so add V4L2_CID_POWER_LINE_FREQUENCY_AUTO entry for them. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/controls.xml | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook/media') diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 23fdf79f8cf3..3bc5ee8b2c74 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -232,8 +232,9 @@ control is deprecated. New drivers and applications should use the Enables a power line frequency filter to avoid flicker. Possible values for enum v4l2_power_line_frequency are: V4L2_CID_POWER_LINE_FREQUENCY_DISABLED (0), -V4L2_CID_POWER_LINE_FREQUENCY_50HZ (1) and -V4L2_CID_POWER_LINE_FREQUENCY_60HZ (2). +V4L2_CID_POWER_LINE_FREQUENCY_50HZ (1), +V4L2_CID_POWER_LINE_FREQUENCY_60HZ (2) and +V4L2_CID_POWER_LINE_FREQUENCY_AUTO (3). V4L2_CID_HUE_AUTO -- cgit v1.2.3