From 53bf0f446bc387eabdd535dca080789cc74607f4 Mon Sep 17 00:00:00 2001 From: Kamil Debski Date: Fri, 25 Jan 2013 06:29:56 -0300 Subject: [media] v4l: Define video buffer flag for the COPY timestamp type Define video buffer flag for the COPY timestamp. In this case the timestamp value is copied from the OUTPUT to the corresponding CAPTURE buffer. Signed-off-by: Kamil Debski Signed-off-by: Kyungmin Park Reviewed-by: Sylwester Nawrocki Acked-by: Hans Verkuil Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/io.xml | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index e6c58559ca6b..2c4c068dde83 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -1145,6 +1145,12 @@ in which case caches have not been used. same clock outside V4L2, use clock_gettime(2) . + + V4L2_BUF_FLAG_TIMESTAMP_COPY + 0x4000 + The CAPTURE buffer timestamp has been taken from the + corresponding OUTPUT buffer. This flag applies only to mem2mem devices. + -- cgit v1.2.3 From e64171b97b88a1adf297d429826fdbb9e232ab53 Mon Sep 17 00:00:00 2001 From: Manjunath Hadli Date: Thu, 7 Feb 2013 13:48:51 -0300 Subject: [media] media: add support for decoder as one of media entity types A lot of SOCs including Texas Instruments Davinci family mainly use video decoders as input devices. This patch adds a flag 'MEDIA_ENT_T_V4L2_SUBDEV_DECODER' media entity type for decoder's. Along side updates the documentation for this media entity type. Signed-off-by: Manjunath Hadli Signed-off-by: Lad, Prabhakar Reviewed-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml index 576b68b33f2c..116c301656e0 100644 --- a/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml +++ b/Documentation/DocBook/media/v4l/media-ioc-enum-entities.xml @@ -272,6 +272,16 @@ MEDIA_ENT_T_V4L2_SUBDEV_LENS Lens controller + + MEDIA_ENT_T_V4L2_SUBDEV_DECODER + Video decoder, the basic function of the video decoder is to + accept analogue video from a wide variety of sources such as + broadcast, DVD players, cameras and video cassette recorders, in + either NTSC, PAL or HD format and still occasionally SECAM, separate + it into its component parts, luminance and chrominance, and output + it in some digital video standard, with appropriate embedded timing + signals. + -- cgit v1.2.3 From 842059aa4796d7c59bc3801d48896ba06b1a1287 Mon Sep 17 00:00:00 2001 From: Masanari Iida Date: Sun, 24 Mar 2013 02:25:56 -0300 Subject: [media] documentation: DocBook/media : Fix typo in dvbproperty.xml Correct spelling typos. Signed-off-by: Masanari Iida Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/dvb/dvbproperty.xml | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index 4a5eaeed0b9e..31dc4dfd1d6a 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -1,6 +1,6 @@
<constant>FE_GET_PROPERTY/FE_SET_PROPERTY</constant> -This section describes the DVB version 5 extention of the DVB-API, also +This section describes the DVB version 5 extension of the DVB-API, also called "S2API", as this API were added to provide support for DVB-S2. It was designed to be able to replace the old frontend API. Yet, the DISEQC and the capability ioctls weren't implemented yet via the new way. @@ -952,7 +952,7 @@ enum fe_interleaving { Measures the amount of bits received before the inner code block, during the same period as DTV_STAT_PRE_ERROR_BIT_COUNT measurement was taken. It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream, - as the frontend may need to manually restart the measurement, loosing some data between each measurement interval. + as the frontend may need to manually restart the measurement, losing some data between each measurement interval. This measurement is monotonically increased, as the frontend gets more bit count measurements. The frontend may reset it when a channel/transponder is tuned. Possible scales for this metric are: @@ -981,7 +981,7 @@ enum fe_interleaving { Measures the amount of bits received after the inner coding, during the same period as DTV_STAT_POST_ERROR_BIT_COUNT measurement was taken. It should be noticed that this measurement can be smaller than the total amount of bits on the transport stream, - as the frontend may need to manually restart the measurement, loosing some data between each measurement interval. + as the frontend may need to manually restart the measurement, losing some data between each measurement interval. This measurement is monotonically increased, as the frontend gets more bit count measurements. The frontend may reset it when a channel/transponder is tuned. Possible scales for this metric are: -- cgit v1.2.3 From 9ca5470cc1433200698a43de2d6e683815e536e6 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 17 Mar 2013 10:34:04 -0300 Subject: [media] v4l2-ctrls: add V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER control Control whether video sequence headers should be repeated. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/controls.xml | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 9e8f85498678..b4952e23201b 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -2299,6 +2299,12 @@ Possible values are: + + V4L2_CID_MPEG_VIDEO_REPEAT_SEQ_HEADER  + boolean + Repeat the video sequence headers. Repeating these +headers makes random access to the video stream easier. Applicable to the MPEG1, 2 and 4 encoder. + V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER  boolean -- cgit v1.2.3 From 098cbc38c27dee66e5bc7f088c30b96e5cc96510 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 24 Mar 2013 06:09:29 -0300 Subject: [media] DocBook/media/v4l: remove the documentation of the obsolete dv_preset API This API is no longer used by any driver and so can be removed from the documentation. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/common.xml | 14 -- Documentation/DocBook/media/v4l/compat.xml | 4 +- Documentation/DocBook/media/v4l/v4l2.xml | 3 - .../DocBook/media/v4l/vidioc-enum-dv-presets.xml | 240 --------------------- .../DocBook/media/v4l/vidioc-enuminput.xml | 5 - .../DocBook/media/v4l/vidioc-enumoutput.xml | 5 - .../DocBook/media/v4l/vidioc-g-dv-preset.xml | 113 ---------- .../DocBook/media/v4l/vidioc-query-dv-preset.xml | 78 ------- 8 files changed, 2 insertions(+), 460 deletions(-) delete mode 100644 Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml delete mode 100644 Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml delete mode 100644 Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml index ae06afbbb3a9..1ddf354aa997 100644 --- a/Documentation/DocBook/media/v4l/common.xml +++ b/Documentation/DocBook/media/v4l/common.xml @@ -749,15 +749,6 @@ polarities, frontporch, backporch etc. The linux/v4l2-dv-timings.h and standards. - - - DV Presets: Digital Video (DV) presets (deprecated). - These are IDs representing a -video timing at the input/output. Presets are pre-defined timings implemented -by the hardware according to video standards. A __u32 data type is used to represent -a preset unlike the bit mask that is used in &v4l2-std-id; allowing future extensions -to support as many different presets as needed. This API is deprecated in favor of the DV Timings -API. To enumerate and query the attributes of the DV timings supported by a device, @@ -766,11 +757,6 @@ API. &VIDIOC-S-DV-TIMINGS; ioctl and to get current DV timings they use the &VIDIOC-G-DV-TIMINGS; ioctl. To detect the DV timings as seen by the video receiver applications use the &VIDIOC-QUERY-DV-TIMINGS; ioctl. - To enumerate and query the attributes of DV presets supported by a device, -applications use the &VIDIOC-ENUM-DV-PRESETS; ioctl. To get the current DV preset, -applications use the &VIDIOC-G-DV-PRESET; ioctl and to set a preset they use the -&VIDIOC-S-DV-PRESET; ioctl. To detect the preset as seen by the video receiver applications -use the &VIDIOC-QUERY-DV-PRESET; ioctl. Applications can make use of the and flags to decide what ioctls are available to set the video timings for the device. diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index 104a1a2b8849..effa5094a2f8 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2625,8 +2625,8 @@ interfaces and should not be implemented in new drivers. . - &VIDIOC-G-DV-PRESET;, &VIDIOC-S-DV-PRESET;, &VIDIOC-ENUM-DV-PRESETS; and - &VIDIOC-QUERY-DV-PRESET; ioctls. Use the DV Timings API (). + VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_ENUM_DV_PRESETS and + VIDIOC_QUERY_DV_PRESET ioctls. Use the DV Timings API (). VIDIOC_SUBDEV_G_CROP and diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index a3cce18384e9..32a10eef3958 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -544,7 +544,6 @@ and discussions on the V4L mailing list. &sub-encoder-cmd; &sub-enumaudio; &sub-enumaudioout; - &sub-enum-dv-presets; &sub-enum-dv-timings; &sub-enum-fmt; &sub-enum-framesizes; @@ -558,7 +557,6 @@ and discussions on the V4L mailing list. &sub-g-audioout; &sub-g-crop; &sub-g-ctrl; - &sub-g-dv-preset; &sub-g-dv-timings; &sub-g-enc-index; &sub-g-ext-ctrls; @@ -582,7 +580,6 @@ and discussions on the V4L mailing list. &sub-querybuf; &sub-querycap; &sub-queryctrl; - &sub-query-dv-preset; &sub-query-dv-timings; &sub-querystd; &sub-reqbufs; diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml deleted file mode 100644 index fced5fb0dbf0..000000000000 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml +++ /dev/null @@ -1,240 +0,0 @@ - - - ioctl VIDIOC_ENUM_DV_PRESETS - &manvol; - - - - VIDIOC_ENUM_DV_PRESETS - Enumerate supported Digital Video presets - - - - - - int ioctl - int fd - int request - struct v4l2_dv_enum_preset *argp - - - - - - Arguments - - - - fd - - &fd; - - - - request - - VIDIOC_ENUM_DV_PRESETS - - - - argp - - - - - - - - - Description - - This ioctl is deprecated. - New drivers and applications should use &VIDIOC-ENUM-DV-TIMINGS; instead. - - - To query the attributes of a DV preset, applications initialize the -index field and zero the reserved array of &v4l2-dv-enum-preset; -and call the VIDIOC_ENUM_DV_PRESETS ioctl with a pointer to this -structure. Drivers fill the rest of the structure or return an -&EINVAL; when the index is out of bounds. To enumerate all DV Presets supported, -applications shall begin at index zero, incrementing by one until the -driver returns EINVAL. Drivers may enumerate a -different set of DV presets after switching the video input or -output. - - - struct <structname>v4l2_dv_enum_presets</structname> - - &cs-str; - - - __u32 - index - Number of the DV preset, set by the -application. - - - __u32 - preset - This field identifies one of the DV preset values listed in . - - - __u8 - name[24] - Name of the preset, a NUL-terminated ASCII string, for example: "720P-60", "1080I-60". This information is -intended for the user. - - - __u32 - width - Width of the active video in pixels for the DV preset. - - - __u32 - height - Height of the active video in lines for the DV preset. - - - __u32 - reserved[4] - Reserved for future extensions. Drivers must set the array to zero. - - - -
- - - struct <structname>DV Presets</structname> - - &cs-str; - - - Preset - Preset value - Description - - - - - - - - V4L2_DV_INVALID - 0 - Invalid preset value. - - - V4L2_DV_480P59_94 - 1 - 720x480 progressive video at 59.94 fps as per BT.1362. - - - V4L2_DV_576P50 - 2 - 720x576 progressive video at 50 fps as per BT.1362. - - - V4L2_DV_720P24 - 3 - 1280x720 progressive video at 24 fps as per SMPTE 296M. - - - V4L2_DV_720P25 - 4 - 1280x720 progressive video at 25 fps as per SMPTE 296M. - - - V4L2_DV_720P30 - 5 - 1280x720 progressive video at 30 fps as per SMPTE 296M. - - - V4L2_DV_720P50 - 6 - 1280x720 progressive video at 50 fps as per SMPTE 296M. - - - V4L2_DV_720P59_94 - 7 - 1280x720 progressive video at 59.94 fps as per SMPTE 274M. - - - V4L2_DV_720P60 - 8 - 1280x720 progressive video at 60 fps as per SMPTE 274M/296M. - - - V4L2_DV_1080I29_97 - 9 - 1920x1080 interlaced video at 29.97 fps as per BT.1120/SMPTE 274M. - - - V4L2_DV_1080I30 - 10 - 1920x1080 interlaced video at 30 fps as per BT.1120/SMPTE 274M. - - - V4L2_DV_1080I25 - 11 - 1920x1080 interlaced video at 25 fps as per BT.1120. - - - V4L2_DV_1080I50 - 12 - 1920x1080 interlaced video at 50 fps as per SMPTE 296M. - - - V4L2_DV_1080I60 - 13 - 1920x1080 interlaced video at 60 fps as per SMPTE 296M. - - - V4L2_DV_1080P24 - 14 - 1920x1080 progressive video at 24 fps as per SMPTE 296M. - - - V4L2_DV_1080P25 - 15 - 1920x1080 progressive video at 25 fps as per SMPTE 296M. - - - V4L2_DV_1080P30 - 16 - 1920x1080 progressive video at 30 fps as per SMPTE 296M. - - - V4L2_DV_1080P50 - 17 - 1920x1080 progressive video at 50 fps as per BT.1120. - - - V4L2_DV_1080P60 - 18 - 1920x1080 progressive video at 60 fps as per BT.1120. - - - -
- - - - &return-value; - - - - EINVAL - - The &v4l2-dv-enum-preset; index -is out of bounds. - - - - ENODATA - - Digital video presets are not supported for this input or output. - - - - - diff --git a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml index 3c9a81305ad4..493a39a8ef21 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml @@ -277,11 +277,6 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. &cs-def; - - V4L2_IN_CAP_PRESETS - 0x00000001 - This input supports setting DV presets by using VIDIOC_S_DV_PRESET. - V4L2_IN_CAP_DV_TIMINGS 0x00000002 diff --git a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml index f4ab0798545d..2654e097df39 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml @@ -162,11 +162,6 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. &cs-def; - - V4L2_OUT_CAP_PRESETS - 0x00000001 - This output supports setting DV presets by using VIDIOC_S_DV_PRESET. - V4L2_OUT_CAP_DV_TIMINGS 0x00000002 diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml deleted file mode 100644 index b9ea37634f6c..000000000000 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml +++ /dev/null @@ -1,113 +0,0 @@ - - - ioctl VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET - &manvol; - - - - VIDIOC_G_DV_PRESET - VIDIOC_S_DV_PRESET - Query or select the DV preset of the current input or output - - - - - - int ioctl - int fd - int request - struct v4l2_dv_preset *argp - - - - - - Arguments - - - - fd - - &fd; - - - - request - - VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET - - - - argp - - - - - - - - - Description - - These ioctls are deprecated. - New drivers and applications should use &VIDIOC-G-DV-TIMINGS; and &VIDIOC-S-DV-TIMINGS; - instead. - - - To query and select the current DV preset, applications -use the VIDIOC_G_DV_PRESET and VIDIOC_S_DV_PRESET -ioctls which take a pointer to a &v4l2-dv-preset; type as argument. -Applications must zero the reserved array in &v4l2-dv-preset;. -VIDIOC_G_DV_PRESET returns a dv preset in the field -preset of &v4l2-dv-preset;. - - VIDIOC_S_DV_PRESET accepts a pointer to a &v4l2-dv-preset; -that has the preset value to be set. Applications must zero the reserved array in &v4l2-dv-preset;. -If the preset is not supported, it returns an &EINVAL; - - - - &return-value; - - - - EINVAL - - This ioctl is not supported, or the -VIDIOC_S_DV_PRESET,VIDIOC_S_DV_PRESET parameter was unsuitable. - - - - ENODATA - - Digital video presets are not supported for this input or output. - - - - EBUSY - - The device is busy and therefore can not change the preset. - - - - - - struct <structname>v4l2_dv_preset</structname> - - &cs-str; - - - __u32 - preset - Preset value to represent the digital video timings - - - __u32 - reserved[4] - Reserved fields for future use - - - -
- - diff --git a/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml deleted file mode 100644 index 68b49d09e245..000000000000 --- a/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml +++ /dev/null @@ -1,78 +0,0 @@ - - - ioctl VIDIOC_QUERY_DV_PRESET - &manvol; - - - - VIDIOC_QUERY_DV_PRESET - Sense the DV preset received by the current -input - - - - - - int ioctl - int fd - int request - struct v4l2_dv_preset *argp - - - - - - Arguments - - - - fd - - &fd; - - - - request - - VIDIOC_QUERY_DV_PRESET - - - - argp - - - - - - - - - Description - - This ioctl is deprecated. - New drivers and applications should use &VIDIOC-QUERY-DV-TIMINGS; instead. - - - The hardware may be able to detect the current DV preset -automatically, similar to sensing the video standard. To do so, applications -call VIDIOC_QUERY_DV_PRESET with a pointer to a -&v4l2-dv-preset; type. Once the hardware detects a preset, that preset is -returned in the preset field of &v4l2-dv-preset;. If the preset could not be -detected because there was no signal, or the signal was unreliable, or the -signal did not map to a supported preset, then the value V4L2_DV_INVALID is -returned. - - - - &return-value; - - - - ENODATA - - Digital video presets are not supported for this input or output. - - - - - -- cgit v1.2.3 From 4e5f1130070ebfdde1b0ea6277e881404e5f34ce Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 24 Mar 2013 06:08:00 -0300 Subject: [media] DocBook/media/v4l: Update version number and document 3.10 changes Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/compat.xml | 13 +++++++++++++ Documentation/DocBook/media/v4l/v4l2.xml | 12 ++++++++++++ 2 files changed, 25 insertions(+) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index effa5094a2f8..5dab33837344 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2493,6 +2493,19 @@ that used it. It was originally scheduled for removal in 2.6.35.
+
+ V4L2 in Linux 3.10 + + + Removed obsolete and unused DV_PRESET ioctls + VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and + VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output capability + flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS. + + + +
+
Relation of V4L2 to other Linux multimedia APIs diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index 32a10eef3958..dae009aa2440 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -124,6 +124,7 @@ Remote Controller chapter. 2010 2011 2012 + 2013 Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab, Pawel Osciak @@ -139,6 +140,17 @@ structs, ioctls) must be noted in more detail in the history chapter (compat.xml), along with the possible impact on existing drivers and applications. --> + + 3.10 + 2013-03-24 + hv + Remove obsolete and unused DV_PRESET ioctls: + VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and + VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output capability + flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS. + + + 3.9 2012-12-03 -- cgit v1.2.3 From 820eac0ef8b86f7275acd1f8bccfb0b30f17bbe9 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 18 Mar 2013 13:20:00 -0300 Subject: [media] DocBook media: fix syntax problems in dvbproperty.xml Caught by xmllint. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/dvb/dvbproperty.xml | 46 ++++++++++++------------- 1 file changed, 22 insertions(+), 24 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index 31dc4dfd1d6a..a9b15e34c5b2 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -903,14 +903,12 @@ enum fe_interleaving { svalue is for signed values of the measure (dB measures) and uvalue is for unsigned values (counters, relative scale) scale - Scale for the value. It can be: -
- + FE_SCALE_NOT_AVAILABLE - The parameter is supported by the frontend, but it was not possible to collect it (could be a transitory or permanent condition) FE_SCALE_DECIBEL - parameter is a signed value, measured in 1/1000 dB FE_SCALE_RELATIVE - parameter is a unsigned value, where 0 means 0% and 65535 means 100%. FE_SCALE_COUNTER - parameter is a unsigned value that counts the occurrence of an event, like bit error, block error, or lapsed time. -
@@ -918,9 +916,9 @@ enum fe_interleaving { Indicates the signal strength level at the analog part of the tuner or of the demod. Possible scales for this metric are: - FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. - FE_SCALE_DECIBEL - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative. - FE_SCALE_RELATIVE - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535). + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_DECIBEL - signal strength is in 0.0001 dBm units, power measured in miliwatts. This value is generally negative. + FE_SCALE_RELATIVE - The frontend provides a 0% to 100% measurement for power (actually, 0 to 65535).
@@ -928,9 +926,9 @@ enum fe_interleaving { Indicates the Signal to Noise ratio for the main carrier. Possible scales for this metric are: - FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. - FE_SCALE_DECIBEL - Signal/Noise ratio is in 0.0001 dB units. - FE_SCALE_RELATIVE - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535). + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_DECIBEL - Signal/Noise ratio is in 0.0001 dB units. + FE_SCALE_RELATIVE - The frontend provides a 0% to 100% measurement for Signal/Noise (actually, 0 to 65535).
@@ -943,8 +941,8 @@ enum fe_interleaving { The frontend may reset it when a channel/transponder is tuned. Possible scales for this metric are: - FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. - FE_SCALE_COUNTER - Number of error bits counted before the inner coding. + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of error bits counted before the inner coding.
@@ -957,9 +955,9 @@ enum fe_interleaving { The frontend may reset it when a channel/transponder is tuned. Possible scales for this metric are: - FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. - FE_SCALE_COUNTER - Number of bits counted while measuring - DTV_STAT_PRE_ERROR_BIT_COUNT. + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of bits counted while measuring + DTV_STAT_PRE_ERROR_BIT_COUNT.
@@ -972,8 +970,8 @@ enum fe_interleaving { The frontend may reset it when a channel/transponder is tuned. Possible scales for this metric are: - FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. - FE_SCALE_COUNTER - Number of error bits counted after the inner coding. + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of error bits counted after the inner coding.
@@ -986,9 +984,9 @@ enum fe_interleaving { The frontend may reset it when a channel/transponder is tuned. Possible scales for this metric are: - FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. - FE_SCALE_COUNTER - Number of bits counted while measuring - DTV_STAT_POST_ERROR_BIT_COUNT. + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of bits counted while measuring + DTV_STAT_POST_ERROR_BIT_COUNT.
@@ -998,8 +996,8 @@ enum fe_interleaving { The frontend may reset it when a channel/transponder is tuned. Possible scales for this metric are: - FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. - FE_SCALE_COUNTER - Number of error blocks counted after the outer coding. + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of error blocks counted after the outer coding.
@@ -1011,9 +1009,9 @@ enum fe_interleaving { by DTV-STAT-TOTAL-BLOCK-COUNT. Possible scales for this metric are: - FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. - FE_SCALE_COUNTER - Number of blocks counted while measuring - DTV_STAT_ERROR_BLOCK_COUNT. + FE_SCALE_NOT_AVAILABLE - it failed to measure it, or the measurement was not complete yet. + FE_SCALE_COUNTER - Number of blocks counted while measuring + DTV_STAT_ERROR_BLOCK_COUNT.
-- cgit v1.2.3 From b5958dc329f0e4584511c5d8a177122e3d23a657 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 18 Mar 2013 13:28:12 -0300 Subject: [media] DocBook media: add VIDIOC_DBG_G_CHIP_NAME documentation And update the other debug ioctls accordingly. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/v4l2.xml | 4 +- .../DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml | 14 +- .../DocBook/media/v4l/vidioc-dbg-g-chip-name.xml | 234 +++++++++++++++++++++ .../DocBook/media/v4l/vidioc-dbg-g-register.xml | 42 +++- 4 files changed, 280 insertions(+), 14 deletions(-) create mode 100644 Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index dae009aa2440..ec3a0c7276df 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -156,8 +156,7 @@ applications. --> 2012-12-03 sa, sn Added timestamp types to v4l2_buffer. - Added V4L2_EVENT_CTRL_CH_RANGE control - event changes flag, see . + Added V4L2_EVENT_CTRL_CH_RANGE control event changes flag. @@ -549,6 +548,7 @@ and discussions on the V4L mailing list. &sub-create-bufs; &sub-cropcap; &sub-dbg-g-chip-ident; + &sub-dbg-g-chip-name; &sub-dbg-g-register; &sub-decoder-cmd; &sub-dqevent; diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml index 4ecd966808de..82e43c6c72b8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml @@ -200,10 +200,10 @@ the values from . &cs-def; - V4L2_CHIP_MATCH_HOST + V4L2_CHIP_MATCH_BRIDGE 0 Match the nth chip on the card, zero for the - host chip. Does not match &i2c; chips. + bridge chip. Does not match sub-devices. V4L2_CHIP_MATCH_I2C_DRIVER @@ -220,6 +220,16 @@ the values from . 3 Match the nth anciliary AC97 chip. + + V4L2_CHIP_MATCH_SUBDEV_NAME + 4 + Match the sub-device by name. Can't be used with this ioctl. + + + V4L2_CHIP_MATCH_SUBDEV_IDX + 5 + Match the nth sub-device. Can't be used with this ioctl. + diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml new file mode 100644 index 000000000000..4921346fabd7 --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml @@ -0,0 +1,234 @@ + + + ioctl VIDIOC_DBG_G_CHIP_NAME + &manvol; + + + + VIDIOC_DBG_G_CHIP_NAME + Identify the chips on a TV card + + + + + + int ioctl + int fd + int request + struct v4l2_dbg_chip_name +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_DBG_G_CHIP_NAME + + + + argp + + + + + + + + + Description + + + Experimental + + This is an experimental interface and may change in +the future. + + + For driver debugging purposes this ioctl allows test +applications to query the driver about the chips present on the TV +card. Regular applications must not use it. When you found a chip +specific bug, please contact the linux-media mailing list (&v4l-ml;) +so it can be fixed. + + To query the driver applications must initialize the +match.type and +match.addr or match.name +fields of a &v4l2-dbg-chip-name; +and call VIDIOC_DBG_G_CHIP_NAME with a pointer to +this structure. On success the driver stores information about the +selected chip in the name and +flags fields. On failure the structure +remains unchanged. + + When match.type is +V4L2_CHIP_MATCH_BRIDGE, +match.addr selects the nth bridge 'chip' +on the TV card. You can enumerate all chips by starting at zero and +incrementing match.addr by one until +VIDIOC_DBG_G_CHIP_NAME fails with an &EINVAL;. +The number zero always selects the bridge chip itself, ⪚ the chip +connected to the PCI or USB bus. Non-zero numbers identify specific +parts of the bridge chip such as an AC97 register block. + + When match.type is +V4L2_CHIP_MATCH_SUBDEV_NAME, +match.name contains the name of a sub-device. +For instance +"saa7127 6-0044" will match the saa7127 sub-device +at the given i2c bus. This match type is not very useful for this ioctl +and is here only for consistency. + + + When match.type is +V4L2_CHIP_MATCH_SUBDEV_IDX, +match.addr selects the nth sub-device. This +allows you to enumerate over all sub-devices. + + On success, the name field will +contain a chip name and the flags field will +contain V4L2_CHIP_FL_READABLE if the driver supports +reading registers from the device or V4L2_CHIP_FL_WRITABLE +if the driver supports writing registers to the device. + + We recommended the v4l2-dbg +utility over calling this ioctl directly. It is available from the +LinuxTV v4l-dvb repository; see http://linuxtv.org/repo/ for +access instructions. + + + + struct <structname>v4l2_dbg_match</structname> + + &cs-ustr; + + + __u32 + type + See for a list of +possible types. + + + union + (anonymous) + + + + __u32 + addr + Match a chip by this number, interpreted according +to the type field. + + + + char + name[32] + Match a chip by this name, interpreted according +to the type field. + + + +
+ + + struct <structname>v4l2_dbg_chip_name</structname> + + &cs-str; + + + struct v4l2_dbg_match + match + How to match the chip, see . + + + char + name[32] + The name of the chip. + + + __u32 + flags + Set by the driver. If V4L2_CHIP_FL_READABLE +is set, then the driver supports reading registers from the device. If +V4L2_CHIP_FL_WRITABLE is set, then it supports writing registers. + + + __u32 + reserved[8] + Reserved fields, both application and driver must set these to 0. + + + +
+ + + + Chip Match Types + + &cs-def; + + + V4L2_CHIP_MATCH_BRIDGE + 0 + Match the nth chip on the card, zero for the + bridge chip. Does not match sub-devices. + + + V4L2_CHIP_MATCH_I2C_DRIVER + 1 + Match an &i2c; chip by its driver name. Can't be used with this ioctl. + + + V4L2_CHIP_MATCH_I2C_ADDR + 2 + Match a chip by its 7 bit &i2c; bus address. Can't be used with this ioctl. + + + V4L2_CHIP_MATCH_AC97 + 3 + Match the nth anciliary AC97 chip. Can't be used with this ioctl. + + + V4L2_CHIP_MATCH_SUBDEV_NAME + 4 + Match the sub-device by name. + + + V4L2_CHIP_MATCH_SUBDEV_IDX + 5 + Match the nth sub-device. + + + +
+ + + + &return-value; + + + + EINVAL + + The match_type is invalid or +no device could be matched. + + + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml index a44aebc7997a..3082b4149dbe 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml @@ -87,7 +87,7 @@ written into the register. To read a register applications must initialize the match.type, -match.chip or match.name and +match.addr or match.name and reg fields, and call VIDIOC_DBG_G_REGISTER with a pointer to this structure. On success the driver stores the register value in the @@ -95,11 +95,11 @@ structure. On success the driver stores the register value in the unchanged. When match.type is -V4L2_CHIP_MATCH_HOST, -match.addr selects the nth non-&i2c; chip +V4L2_CHIP_MATCH_BRIDGE, +match.addr selects the nth non-sub-device chip on the TV card. The number zero always selects the host chip, ⪚ the chip connected to the PCI or USB bus. You can find out which chips are -present with the &VIDIOC-DBG-G-CHIP-IDENT; ioctl. +present with the &VIDIOC-DBG-G-CHIP-NAME; ioctl. When match.type is V4L2_CHIP_MATCH_I2C_DRIVER, @@ -109,7 +109,7 @@ For instance supported by the saa7127 driver, regardless of its &i2c; bus address. When multiple chips supported by the same driver are present, the effect of these ioctls is undefined. Again with the -&VIDIOC-DBG-G-CHIP-IDENT; ioctl you can find out which &i2c; chips are +&VIDIOC-DBG-G-CHIP-NAME; ioctl you can find out which &i2c; chips are present. When match.type is @@ -122,19 +122,31 @@ bus address. match.addr selects the nth AC97 chip on the TV card. + When match.type is +V4L2_CHIP_MATCH_SUBDEV_NAME, +match.name contains the sub-device name. +For instance +"saa7127 6-0044" will match this specific saa7127 +sub-device. Again with the &VIDIOC-DBG-G-CHIP-NAME; ioctl you can find +out which sub-devices are present. + + When match.type is +V4L2_CHIP_MATCH_SUBDEV_IDX, +match.addr selects the nth sub-device. + Success not guaranteed Due to a flaw in the Linux &i2c; bus driver these ioctls may return successfully without actually reading or writing a register. To -catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-IDENT; +catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-NAME; call confirming the presence of the selected &i2c; chip. These ioctls are optional, not all drivers may support them. However when a driver supports these ioctls it must also support -&VIDIOC-DBG-G-CHIP-IDENT;. Conversely it may support -VIDIOC_DBG_G_CHIP_IDENT but not these ioctls. +&VIDIOC-DBG-G-CHIP-NAME;. Conversely it may support +VIDIOC_DBG_G_CHIP_NAME but not these ioctls. VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER were introduced in Linux @@ -217,10 +229,10 @@ register. &cs-def; - V4L2_CHIP_MATCH_HOST + V4L2_CHIP_MATCH_BRIDGE 0 Match the nth chip on the card, zero for the - host chip. Does not match &i2c; chips. + bridge chip. Does not match sub-devices. V4L2_CHIP_MATCH_I2C_DRIVER @@ -237,6 +249,16 @@ register. 3 Match the nth anciliary AC97 chip. + + V4L2_CHIP_MATCH_SUBDEV_NAME + 4 + Match the sub-device by name. + + + V4L2_CHIP_MATCH_SUBDEV_IDX + 5 + Match the nth sub-device. + -- cgit v1.2.3 From e3f7586310e80be3f75fe03dabda0a64f54d6d73 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 25 Mar 2013 08:49:15 -0300 Subject: [media] DocBook media: document 3.10 changes Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/compat.xml | 4 ++++ Documentation/DocBook/media/v4l/v4l2.xml | 4 ++-- 2 files changed, 6 insertions(+), 2 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index 5dab33837344..8c2b3687a6a4 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2503,6 +2503,10 @@ that used it. It was originally scheduled for removal in 2.6.35. flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS. + + Added new debugging ioctl &VIDIOC-DBG-G-CHIP-NAME;. + + diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index ec3a0c7276df..c1f334084213 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -142,12 +142,12 @@ applications. --> 3.10 - 2013-03-24 + 2013-03-25 hv Remove obsolete and unused DV_PRESET ioctls: VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output capability - flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS. + flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS. Added VIDIOC_DBG_G_CHIP_NAME. -- cgit v1.2.3 From af720c7c414befed0aad1c92f6e33271cf4f83d3 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 26 Mar 2013 22:47:22 -0300 Subject: [media] v4l2: Fix the type of V4L2_CID_TUNE_PREEMPHASIS in the documentation Change the type of V4L2_CID_TUNE_PREEMPHASIS from 'integer' to 'enum v4l2_preemphasis' Acked-by: Hans Verkuil Signed-off-by: Andrey Smirnov Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/controls.xml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index b4952e23201b..06e9a5facb40 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3854,7 +3854,7 @@ in Hz. The range and step are driver-specific. V4L2_CID_TUNE_PREEMPHASIS  - integer + enum v4l2_preemphasis Configures the pre-emphasis value for broadcasting. A pre-emphasis filter is applied to the broadcast to accentuate the high audio frequencies. -- cgit v1.2.3 From b4e96a7e9f9511d1b57a10a08cd10af6e517966b Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Tue, 26 Mar 2013 22:47:24 -0300 Subject: [media] v4l2: Add documentation for the FM RX controls Add appropriate documentation for all the newly added standard controls. Based on the patch by Manjunatha Halli [1] [1] http://lists-archives.com/linux-kernel/27641303-media-update-docs-for-v4l2-fm-new-features.html Acked-by: Hans Verkuil Signed-off-by: Andrey Smirnov Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/compat.xml | 3 + Documentation/DocBook/media/v4l/controls.xml | 72 ++++++++++++++++++++++ .../DocBook/media/v4l/vidioc-g-ext-ctrls.xml | 9 +++ 3 files changed, 84 insertions(+) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index 8c2b3687a6a4..e44161ffdd07 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2310,6 +2310,9 @@ more information. Added FM Modulator (FM TX) Extended Control Class: V4L2_CTRL_CLASS_FM_TX and their Control IDs. + + Added FM Receiver (FM RX) Extended Control Class: V4L2_CTRL_CLASS_FM_RX and their Control IDs. + Added Remote Controller chapter, describing the default Remote Controller mapping for media devices. diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 06e9a5facb40..c8eb6c222274 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -4693,4 +4693,76 @@ interface and may change in the future. + +
+ FM Receiver Control Reference + + The FM Receiver (FM_RX) class includes controls for common features of + FM Reception capable devices. + + + FM_RX Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_FM_RX_CLASS  + class + The FM_RX class +descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a +description of this control class. + + + V4L2_CID_RDS_RECEPTION  + boolean + Enables/disables RDS + reception by the radio tuner + + + V4L2_CID_TUNE_DEEMPHASIS  + enum v4l2_deemphasis + + Configures the de-emphasis value for reception. +A de-emphasis filter is applied to the broadcast to accentuate the high audio frequencies. +Depending on the region, a time constant of either 50 or 75 useconds is used. The enum v4l2_deemphasis +defines possible values for de-emphasis. Here they are: + + + + + V4L2_DEEMPHASIS_DISABLED  + No de-emphasis is applied. + + + V4L2_DEEMPHASIS_50_uS  + A de-emphasis of 50 uS is used. + + + V4L2_DEEMPHASIS_75_uS  + A de-emphasis of 75 uS is used. + + + + + + + + +
+ +
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml index 4e16112df992..b3bb9575b2e0 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml @@ -319,6 +319,15 @@ These controls are described in . + + + V4L2_CTRL_CLASS_FM_RX + 0xa10000 + The class containing FM Receiver (FM RX) controls. +These controls are described in . + + -- cgit v1.2.3 From fc39f46b54b600f053bf9bab757023344e97925e Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 14 Mar 2013 07:01:24 -0300 Subject: [media] V4L: Add MATRIX option to V4L2_CID_EXPOSURE_METERING control This patch adds a menu option to the V4L2_CID_EXPOSURE_METERING control for multi-zone metering. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/controls.xml | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index c8eb6c222274..8d7a77928d49 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3142,6 +3142,13 @@ giving priority to the center of the metered area. V4L2_EXPOSURE_METERING_SPOT  Measure only very small area at the center of the frame. + + V4L2_EXPOSURE_METERING_MATRIX  + A multi-zone metering. The light intensity is measured +in several points of the frame and the the results are combined. The +algorithm of the zones selection and their significance in calculating the +final value is device dependant. + -- cgit v1.2.3 From 7b88fc086a217be7d16ec68a7f66093d344e39d7 Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Mon, 18 Mar 2013 08:47:59 -0300 Subject: [media] soc_camera: Add RGB666 & RGB888 formats Based on work done by Katsuya Matsubara. Signed-off-by: Phil Edworthy Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/subdev-formats.xml | 206 ++++++++++++++++++++- Documentation/DocBook/media_api.tmpl | 1 + 2 files changed, 197 insertions(+), 10 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/subdev-formats.xml b/Documentation/DocBook/media/v4l/subdev-formats.xml index cc51372ed5e0..adc61982df7b 100644 --- a/Documentation/DocBook/media/v4l/subdev-formats.xml +++ b/Documentation/DocBook/media/v4l/subdev-formats.xml @@ -93,19 +93,35 @@ RGB formats - + - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + Identifier @@ -117,6 +133,22 @@ Bit + 23 + 22 + 21 + 20 + 19 + 18 + 17 + 16 + 15 + 14 + 13 + 12 + 11 + 10 + 9 + 8 7 6 5 @@ -132,6 +164,7 @@ V4L2_MBUS_FMT_RGB444_2X8_PADHI_BE 0x1001 + &dash-ent-16; 0 0 0 @@ -145,6 +178,7 @@ + &dash-ent-16; g3 g2 g1 @@ -158,6 +192,7 @@ V4L2_MBUS_FMT_RGB444_2X8_PADHI_LE 0x1002 + &dash-ent-16; g3 g2 g1 @@ -171,6 +206,7 @@ + &dash-ent-16; 0 0 0 @@ -184,6 +220,7 @@ V4L2_MBUS_FMT_RGB555_2X8_PADHI_BE 0x1003 + &dash-ent-16; 0 r4 r3 @@ -197,6 +234,7 @@ + &dash-ent-16; g2 g1 g0 @@ -210,6 +248,7 @@ V4L2_MBUS_FMT_RGB555_2X8_PADHI_LE 0x1004 + &dash-ent-16; g2 g1 g0 @@ -223,6 +262,7 @@ + &dash-ent-16; 0 r4 r3 @@ -236,6 +276,7 @@ V4L2_MBUS_FMT_BGR565_2X8_BE 0x1005 + &dash-ent-16; b4 b3 b2 @@ -249,6 +290,7 @@ + &dash-ent-16; g2 g1 g0 @@ -262,6 +304,7 @@ V4L2_MBUS_FMT_BGR565_2X8_LE 0x1006 + &dash-ent-16; g2 g1 g0 @@ -275,6 +318,7 @@ + &dash-ent-16; b4 b3 b2 @@ -288,6 +332,7 @@ V4L2_MBUS_FMT_RGB565_2X8_BE 0x1007 + &dash-ent-16; r4 r3 r2 @@ -301,6 +346,7 @@ + &dash-ent-16; g2 g1 g0 @@ -314,6 +360,7 @@ V4L2_MBUS_FMT_RGB565_2X8_LE 0x1008 + &dash-ent-16; g2 g1 g0 @@ -327,6 +374,27 @@ + &dash-ent-16; + r4 + r3 + r2 + r1 + r0 + g5 + g4 + g3 + + + V4L2_MBUS_FMT_RGB666_1X18 + 0x1009 + + - + - + - + - + - + - + r5 r4 r3 r2 @@ -335,6 +403,124 @@ g5 g4 g3 + g2 + g1 + g0 + b5 + b4 + b3 + b2 + b1 + b0 + + + V4L2_MBUS_FMT_RGB888_1X24 + 0x100a + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + + V4L2_MBUS_FMT_RGB888_2X12_BE + 0x100b + + &dash-ent-10; + - + - + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + g7 + g6 + g5 + g4 + + + + + + &dash-ent-10; + - + - + g3 + g2 + g1 + g0 + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + + V4L2_MBUS_FMT_RGB888_2X12_LE + 0x100c + + &dash-ent-10; + - + - + g3 + g2 + g1 + g0 + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + + + + + &dash-ent-10; + - + - + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + g7 + g6 + g5 + g4 diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index 1f6593deb995..6a8b7158697f 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -23,6 +23,7 @@ http://linuxtv.org/repo/"> ----------"> +----------------"> ]> -- cgit v1.2.3 From cd634f1bfc182e564f33809fdca33027bb99fceb Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 27 Mar 2013 08:04:23 -0300 Subject: [media] v4l2: put VIDIOC_DBG_G_CHIP_NAME under ADV_DEBUG Only enable this ioctl if the VIDEO_ADV_DEBUG config option is set. This prevents abuse from both userspace and kernelspace (some bridge drivers abuse DBG_G_CHIP_IDENT, lets prevent that from happening again with this ioctl). Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml | 3 +++ 1 file changed, 3 insertions(+) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml index 4921346fabd7..5fce8d84288e 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml @@ -63,6 +63,9 @@ card. Regular applications must not use it. When you found a chip specific bug, please contact the linux-media mailing list (&v4l-ml;) so it can be fixed. + Additionally the Linux kernel must be compiled with the +CONFIG_VIDEO_ADV_DEBUG option to enable this ioctl. + To query the driver applications must initialize the match.type and match.addr or match.name -- cgit v1.2.3 From 3eef25107cab65a1158b11ba373fb9b4fc25b4b8 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 3 Apr 2013 04:08:19 -0300 Subject: [media] v4l2: drop V4L2_CHIP_MATCH_SUBDEV_NAME After using the new VIDIOC_DBG_G_CHIP_NAME ioctl I realized that the matching by name possibility is useless. Just drop it and rename MATCH_SUBDEV_IDX to just MATCH_SUBDEV. The v4l2-dbg utility is much better placed to match by name by just enumerating all bridge and subdev devices until chip_name.name matches. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- .../DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml | 7 +------ .../DocBook/media/v4l/vidioc-dbg-g-chip-name.xml | 18 ++---------------- .../DocBook/media/v4l/vidioc-dbg-g-register.xml | 17 ++--------------- 3 files changed, 5 insertions(+), 37 deletions(-) (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml index 82e43c6c72b8..921e18550d26 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-ident.xml @@ -221,13 +221,8 @@ the values from . Match the nth anciliary AC97 chip. - V4L2_CHIP_MATCH_SUBDEV_NAME + V4L2_CHIP_MATCH_SUBDEV 4 - Match the sub-device by name. Can't be used with this ioctl. - - - V4L2_CHIP_MATCH_SUBDEV_IDX - 5 Match the nth sub-device. Can't be used with this ioctl. diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml index 5fce8d84288e..fa3bd42ab167 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml @@ -87,16 +87,7 @@ connected to the PCI or USB bus. Non-zero numbers identify specific parts of the bridge chip such as an AC97 register block. When match.type is -V4L2_CHIP_MATCH_SUBDEV_NAME, -match.name contains the name of a sub-device. -For instance -"saa7127 6-0044" will match the saa7127 sub-device -at the given i2c bus. This match type is not very useful for this ioctl -and is here only for consistency. - - - When match.type is -V4L2_CHIP_MATCH_SUBDEV_IDX, +V4L2_CHIP_MATCH_SUBDEV, match.addr selects the nth sub-device. This allows you to enumerate over all sub-devices. @@ -207,13 +198,8 @@ is set, then the driver supports reading registers from the device. If Match the nth anciliary AC97 chip. Can't be used with this ioctl. - V4L2_CHIP_MATCH_SUBDEV_NAME + V4L2_CHIP_MATCH_SUBDEV 4 - Match the sub-device by name. - - - V4L2_CHIP_MATCH_SUBDEV_IDX - 5 Match the nth sub-device. diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml index 3082b4149dbe..db7844f2439f 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml @@ -123,15 +123,7 @@ bus address. on the TV card. When match.type is -V4L2_CHIP_MATCH_SUBDEV_NAME, -match.name contains the sub-device name. -For instance -"saa7127 6-0044" will match this specific saa7127 -sub-device. Again with the &VIDIOC-DBG-G-CHIP-NAME; ioctl you can find -out which sub-devices are present. - - When match.type is -V4L2_CHIP_MATCH_SUBDEV_IDX, +V4L2_CHIP_MATCH_SUBDEV, match.addr selects the nth sub-device. @@ -250,13 +242,8 @@ register. Match the nth anciliary AC97 chip. - V4L2_CHIP_MATCH_SUBDEV_NAME + V4L2_CHIP_MATCH_SUBDEV 4 - Match the sub-device by name. - - - V4L2_CHIP_MATCH_SUBDEV_IDX - 5 Match the nth sub-device. -- cgit v1.2.3 From 96b03d2a3078d5e95a8b106634faa7cea88ebe5e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 6 Apr 2013 06:16:58 -0300 Subject: [media] v4l2: rename VIDIOC_DBG_G_CHIP_NAME to _CHIP_INFO This ioctl will be extended to return more information than just the name. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab --- Documentation/DocBook/media/v4l/compat.xml | 2 +- Documentation/DocBook/media/v4l/v4l2.xml | 4 +- .../DocBook/media/v4l/vidioc-dbg-g-chip-info.xml | 223 +++++++++++++++++++++ .../DocBook/media/v4l/vidioc-dbg-g-chip-name.xml | 223 --------------------- .../DocBook/media/v4l/vidioc-dbg-g-register.xml | 10 +- 5 files changed, 231 insertions(+), 231 deletions(-) create mode 100644 Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml delete mode 100644 Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml (limited to 'Documentation/DocBook') diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index e44161ffdd07..f43542ae2981 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -2507,7 +2507,7 @@ that used it. It was originally scheduled for removal in 2.6.35. - Added new debugging ioctl &VIDIOC-DBG-G-CHIP-NAME;. + Added new debugging ioctl &VIDIOC-DBG-G-CHIP-INFO;. diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index c1f334084213..bfc93cdcf696 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -147,7 +147,7 @@ applications. --> Remove obsolete and unused DV_PRESET ioctls: VIDIOC_G_DV_PRESET, VIDIOC_S_DV_PRESET, VIDIOC_QUERY_DV_PRESET and VIDIOC_ENUM_DV_PRESET. Remove the related v4l2_input/output capability - flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS. Added VIDIOC_DBG_G_CHIP_NAME. + flags V4L2_IN_CAP_PRESETS and V4L2_OUT_CAP_PRESETS. Added VIDIOC_DBG_G_CHIP_INFO. @@ -548,7 +548,7 @@ and discussions on the V4L mailing list. &sub-create-bufs; &sub-cropcap; &sub-dbg-g-chip-ident; - &sub-dbg-g-chip-name; + &sub-dbg-g-chip-info; &sub-dbg-g-register; &sub-decoder-cmd; &sub-dqevent; diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml new file mode 100644 index 000000000000..e1cece6c5de1 --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-info.xml @@ -0,0 +1,223 @@ + + + ioctl VIDIOC_DBG_G_CHIP_INFO + &manvol; + + + + VIDIOC_DBG_G_CHIP_INFO + Identify the chips on a TV card + + + + + + int ioctl + int fd + int request + struct v4l2_dbg_chip_info +*argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_DBG_G_CHIP_INFO + + + + argp + + + + + + + + + Description + + + Experimental + + This is an experimental interface and may change in +the future. + + + For driver debugging purposes this ioctl allows test +applications to query the driver about the chips present on the TV +card. Regular applications must not use it. When you found a chip +specific bug, please contact the linux-media mailing list (&v4l-ml;) +so it can be fixed. + + Additionally the Linux kernel must be compiled with the +CONFIG_VIDEO_ADV_DEBUG option to enable this ioctl. + + To query the driver applications must initialize the +match.type and +match.addr or match.name +fields of a &v4l2-dbg-chip-info; +and call VIDIOC_DBG_G_CHIP_INFO with a pointer to +this structure. On success the driver stores information about the +selected chip in the name and +flags fields. On failure the structure +remains unchanged. + + When match.type is +V4L2_CHIP_MATCH_BRIDGE, +match.addr selects the nth bridge 'chip' +on the TV card. You can enumerate all chips by starting at zero and +incrementing match.addr by one until +VIDIOC_DBG_G_CHIP_INFO fails with an &EINVAL;. +The number zero always selects the bridge chip itself, ⪚ the chip +connected to the PCI or USB bus. Non-zero numbers identify specific +parts of the bridge chip such as an AC97 register block. + + When match.type is +V4L2_CHIP_MATCH_SUBDEV, +match.addr selects the nth sub-device. This +allows you to enumerate over all sub-devices. + + On success, the name field will +contain a chip name and the flags field will +contain V4L2_CHIP_FL_READABLE if the driver supports +reading registers from the device or V4L2_CHIP_FL_WRITABLE +if the driver supports writing registers to the device. + + We recommended the v4l2-dbg +utility over calling this ioctl directly. It is available from the +LinuxTV v4l-dvb repository; see http://linuxtv.org/repo/ for +access instructions. + + +
+ struct <structname>v4l2_dbg_match</structname> + + &cs-ustr; + + + __u32 + type + See for a list of +possible types. + + + union + (anonymous) + + + + __u32 + addr + Match a chip by this number, interpreted according +to the type field. + + + + char + name[32] + Match a chip by this name, interpreted according +to the type field. + + + +
+ + + struct <structname>v4l2_dbg_chip_info</structname> + + &cs-str; + + + struct v4l2_dbg_match + match + How to match the chip, see . + + + char + name[32] + The name of the chip. + + + __u32 + flags + Set by the driver. If V4L2_CHIP_FL_READABLE +is set, then the driver supports reading registers from the device. If +V4L2_CHIP_FL_WRITABLE is set, then it supports writing registers. + + + __u32 + reserved[8] + Reserved fields, both application and driver must set these to 0. + + + +
+ + + + Chip Match Types + + &cs-def; + + + V4L2_CHIP_MATCH_BRIDGE + 0 + Match the nth chip on the card, zero for the + bridge chip. Does not match sub-devices. + + + V4L2_CHIP_MATCH_I2C_DRIVER + 1 + Match an &i2c; chip by its driver name. Can't be used with this ioctl. + + + V4L2_CHIP_MATCH_I2C_ADDR + 2 + Match a chip by its 7 bit &i2c; bus address. Can't be used with this ioctl. + + + V4L2_CHIP_MATCH_AC97 + 3 + Match the nth anciliary AC97 chip. Can't be used with this ioctl. + + + V4L2_CHIP_MATCH_SUBDEV + 4 + Match the nth sub-device. + + + +
+ + + + &return-value; + + + + EINVAL + + The match_type is invalid or +no device could be matched. + + + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml deleted file mode 100644 index fa3bd42ab167..000000000000 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-chip-name.xml +++ /dev/null @@ -1,223 +0,0 @@ - - - ioctl VIDIOC_DBG_G_CHIP_NAME - &manvol; - - - - VIDIOC_DBG_G_CHIP_NAME - Identify the chips on a TV card - - - - - - int ioctl - int fd - int request - struct v4l2_dbg_chip_name -*argp - - - - - - Arguments - - - - fd - - &fd; - - - - request - - VIDIOC_DBG_G_CHIP_NAME - - - - argp - - - - - - - - - Description - - - Experimental - - This is an experimental interface and may change in -the future. - - - For driver debugging purposes this ioctl allows test -applications to query the driver about the chips present on the TV -card. Regular applications must not use it. When you found a chip -specific bug, please contact the linux-media mailing list (&v4l-ml;) -so it can be fixed. - - Additionally the Linux kernel must be compiled with the -CONFIG_VIDEO_ADV_DEBUG option to enable this ioctl. - - To query the driver applications must initialize the -match.type and -match.addr or match.name -fields of a &v4l2-dbg-chip-name; -and call VIDIOC_DBG_G_CHIP_NAME with a pointer to -this structure. On success the driver stores information about the -selected chip in the name and -flags fields. On failure the structure -remains unchanged. - - When match.type is -V4L2_CHIP_MATCH_BRIDGE, -match.addr selects the nth bridge 'chip' -on the TV card. You can enumerate all chips by starting at zero and -incrementing match.addr by one until -VIDIOC_DBG_G_CHIP_NAME fails with an &EINVAL;. -The number zero always selects the bridge chip itself, ⪚ the chip -connected to the PCI or USB bus. Non-zero numbers identify specific -parts of the bridge chip such as an AC97 register block. - - When match.type is -V4L2_CHIP_MATCH_SUBDEV, -match.addr selects the nth sub-device. This -allows you to enumerate over all sub-devices. - - On success, the name field will -contain a chip name and the flags field will -contain V4L2_CHIP_FL_READABLE if the driver supports -reading registers from the device or V4L2_CHIP_FL_WRITABLE -if the driver supports writing registers to the device. - - We recommended the v4l2-dbg -utility over calling this ioctl directly. It is available from the -LinuxTV v4l-dvb repository; see http://linuxtv.org/repo/ for -access instructions. - - - - struct <structname>v4l2_dbg_match</structname> - - &cs-ustr; - - - __u32 - type - See for a list of -possible types. - - - union - (anonymous) - - - - __u32 - addr - Match a chip by this number, interpreted according -to the type field. - - - - char - name[32] - Match a chip by this name, interpreted according -to the type field. - - - -
- - - struct <structname>v4l2_dbg_chip_name</structname> - - &cs-str; - - - struct v4l2_dbg_match - match - How to match the chip, see . - - - char - name[32] - The name of the chip. - - - __u32 - flags - Set by the driver. If V4L2_CHIP_FL_READABLE -is set, then the driver supports reading registers from the device. If -V4L2_CHIP_FL_WRITABLE is set, then it supports writing registers. - - - __u32 - reserved[8] - Reserved fields, both application and driver must set these to 0. - - - -
- - - - Chip Match Types - - &cs-def; - - - V4L2_CHIP_MATCH_BRIDGE - 0 - Match the nth chip on the card, zero for the - bridge chip. Does not match sub-devices. - - - V4L2_CHIP_MATCH_I2C_DRIVER - 1 - Match an &i2c; chip by its driver name. Can't be used with this ioctl. - - - V4L2_CHIP_MATCH_I2C_ADDR - 2 - Match a chip by its 7 bit &i2c; bus address. Can't be used with this ioctl. - - - V4L2_CHIP_MATCH_AC97 - 3 - Match the nth anciliary AC97 chip. Can't be used with this ioctl. - - - V4L2_CHIP_MATCH_SUBDEV - 4 - Match the nth sub-device. - - - -
- - - - &return-value; - - - - EINVAL - - The match_type is invalid or -no device could be matched. - - - - - diff --git a/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml index db7844f2439f..d13bac9e2445 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dbg-g-register.xml @@ -99,7 +99,7 @@ unchanged. match.addr selects the nth non-sub-device chip on the TV card. The number zero always selects the host chip, ⪚ the chip connected to the PCI or USB bus. You can find out which chips are -present with the &VIDIOC-DBG-G-CHIP-NAME; ioctl. +present with the &VIDIOC-DBG-G-CHIP-INFO; ioctl. When match.type is V4L2_CHIP_MATCH_I2C_DRIVER, @@ -109,7 +109,7 @@ For instance supported by the saa7127 driver, regardless of its &i2c; bus address. When multiple chips supported by the same driver are present, the effect of these ioctls is undefined. Again with the -&VIDIOC-DBG-G-CHIP-NAME; ioctl you can find out which &i2c; chips are +&VIDIOC-DBG-G-CHIP-INFO; ioctl you can find out which &i2c; chips are present. When match.type is @@ -131,14 +131,14 @@ on the TV card. Due to a flaw in the Linux &i2c; bus driver these ioctls may return successfully without actually reading or writing a register. To -catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-NAME; +catch the most likely failure we recommend a &VIDIOC-DBG-G-CHIP-INFO; call confirming the presence of the selected &i2c; chip. These ioctls are optional, not all drivers may support them. However when a driver supports these ioctls it must also support -&VIDIOC-DBG-G-CHIP-NAME;. Conversely it may support -VIDIOC_DBG_G_CHIP_NAME but not these ioctls. +&VIDIOC-DBG-G-CHIP-INFO;. Conversely it may support +VIDIOC_DBG_G_CHIP_INFO but not these ioctls. VIDIOC_DBG_G_REGISTER and VIDIOC_DBG_S_REGISTER were introduced in Linux -- cgit v1.2.3