From dc474c891c1993c4d608bed00c425b6db93d088d Mon Sep 17 00:00:00 2001 From: Matt LaPlante Date: Fri, 30 Jun 2006 01:56:06 -0700 Subject: [PATCH] Documentation/IPMI typos Two typos in Documentation/IPMI. Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- Documentation/IPMI.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/IPMI.txt') diff --git a/Documentation/IPMI.txt b/Documentation/IPMI.txt index bf1cf98d2a27..0256805b548f 100644 --- a/Documentation/IPMI.txt +++ b/Documentation/IPMI.txt @@ -10,7 +10,7 @@ standard for controlling intelligent devices that monitor a system. It provides for dynamic discovery of sensors in the system and the ability to monitor the sensors and be informed when the sensor's values change or go outside certain boundaries. It also has a -standardized database for field-replacable units (FRUs) and a watchdog +standardized database for field-replaceable units (FRUs) and a watchdog timer. To use this, you need an interface to an IPMI controller in your @@ -64,7 +64,7 @@ situation, you need to read the section below named 'The SI Driver' or IPMI defines a standard watchdog timer. You can enable this with the 'IPMI Watchdog Timer' config option. If you compile the driver into the kernel, then via a kernel command-line option you can have the -watchdog timer start as soon as it intitializes. It also have a lot +watchdog timer start as soon as it initializes. It also have a lot of other options, see the 'Watchdog' section below for more details. Note that you can also have the watchdog continue to run if it is closed (by default it is disabled on close). Go into the 'Watchdog -- cgit v1.2.3