From 198266af3ab934847c840b2442ed66b255723e8a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jonathan=20Neusch=C3=A4fer?= Date: Thu, 8 Aug 2019 18:58:55 +0200 Subject: Documentation/arm/sa1100: Remove some obsolete documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The support for the following boards, among others, was removed in 2004 with commit "[ARM] Remove broken SA1100 machine support.": - ADS Bitsy - Brutus - Freebird - ADS GraphicsClient Plus - ADS GraphicsMaster - Höft & Wessel Webpanel - Compaq Itsy - nanoEngine - Pangolin - PLEB - Yopy Tifon support has been removed in 2.4.3.3. Signed-off-by: Jonathan Neuschäfer Signed-off-by: Jonathan Corbet --- Documentation/arm/sa1100/adsbitsy.rst | 51 -------------- Documentation/arm/sa1100/brutus.rst | 69 ------------------- Documentation/arm/sa1100/freebird.rst | 25 ------- Documentation/arm/sa1100/graphicsclient.rst | 102 ---------------------------- Documentation/arm/sa1100/graphicsmaster.rst | 60 ---------------- Documentation/arm/sa1100/huw_webpanel.rst | 21 ------ Documentation/arm/sa1100/index.rst | 12 ---- Documentation/arm/sa1100/itsy.rst | 47 ------------- Documentation/arm/sa1100/nanoengine.rst | 11 --- Documentation/arm/sa1100/pangolin.rst | 29 -------- Documentation/arm/sa1100/pleb.rst | 13 ---- Documentation/arm/sa1100/tifon.rst | 7 -- Documentation/arm/sa1100/yopy.rst | 5 -- 13 files changed, 452 deletions(-) delete mode 100644 Documentation/arm/sa1100/adsbitsy.rst delete mode 100644 Documentation/arm/sa1100/brutus.rst delete mode 100644 Documentation/arm/sa1100/freebird.rst delete mode 100644 Documentation/arm/sa1100/graphicsclient.rst delete mode 100644 Documentation/arm/sa1100/graphicsmaster.rst delete mode 100644 Documentation/arm/sa1100/huw_webpanel.rst delete mode 100644 Documentation/arm/sa1100/itsy.rst delete mode 100644 Documentation/arm/sa1100/nanoengine.rst delete mode 100644 Documentation/arm/sa1100/pangolin.rst delete mode 100644 Documentation/arm/sa1100/pleb.rst delete mode 100644 Documentation/arm/sa1100/tifon.rst delete mode 100644 Documentation/arm/sa1100/yopy.rst (limited to 'Documentation/arm') diff --git a/Documentation/arm/sa1100/adsbitsy.rst b/Documentation/arm/sa1100/adsbitsy.rst deleted file mode 100644 index c179cb26b682..000000000000 --- a/Documentation/arm/sa1100/adsbitsy.rst +++ /dev/null @@ -1,51 +0,0 @@ -=============================== -ADS Bitsy Single Board Computer -=============================== - -(It is different from Bitsy(iPAQ) of Compaq) - -For more details, contact Applied Data Systems or see -http://www.applieddata.net/products.html - -The Linux support for this product has been provided by -Woojung Huh - -Use 'make adsbitsy_config' before any 'make config'. -This will set up defaults for ADS Bitsy support. - -The kernel zImage is linked to be loaded and executed at 0xc0400000. - -Linux can be used with the ADS BootLoader that ships with the -newer rev boards. See their documentation on how to load Linux. - -Supported peripherals -===================== - -- SA1100 LCD frame buffer (8/16bpp...sort of) -- SA1111 USB Master -- SA1100 serial port -- pcmcia, compact flash -- touchscreen(ucb1200) -- console on LCD screen -- serial ports (ttyS[0-2]) - - ttyS0 is default for serial console - -To do -===== - -- everything else! :-) - -Notes -===== - -- The flash on board is divided into 3 partitions. - You should be careful to use flash on board. - Its partition is different from GraphicsClient Plus and GraphicsMaster - -- 16bpp mode requires a different cable than what ships with the board. - Contact ADS or look through the manual to wire your own. Currently, - if you compile with 16bit mode support and switch into a lower bpp - mode, the timing is off so the image is corrupted. This will be - fixed soon. - -Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! diff --git a/Documentation/arm/sa1100/brutus.rst b/Documentation/arm/sa1100/brutus.rst deleted file mode 100644 index e1a23bee6d44..000000000000 --- a/Documentation/arm/sa1100/brutus.rst +++ /dev/null @@ -1,69 +0,0 @@ -====== -Brutus -====== - -Brutus is an evaluation platform for the SA1100 manufactured by Intel. -For more details, see: - -http://developer.intel.com - -To compile for Brutus, you must issue the following commands:: - - make brutus_config - make config - [accept all the defaults] - make zImage - -The resulting kernel will end up in linux/arch/arm/boot/zImage. This file -must be loaded at 0xc0008000 in Brutus's memory and execution started at -0xc0008000 as well with the value of registers r0 = 0 and r1 = 16 upon -entry. - -But prior to execute the kernel, a ramdisk image must also be loaded in -memory. Use memory address 0xd8000000 for this. Note that the file -containing the (compressed) ramdisk image must not exceed 4 MB. - -Typically, you'll need angelboot to load the kernel. -The following angelboot.opt file should be used:: - - base 0xc0008000 - entry 0xc0008000 - r0 0x00000000 - r1 0x00000010 - device /dev/ttyS0 - options "9600 8N1" - baud 115200 - otherfile ramdisk_img.gz - otherbase 0xd8000000 - -Then load the kernel and ramdisk with:: - - angelboot -f angelboot.opt zImage - -The first Brutus serial port (assumed to be linked to /dev/ttyS0 on your -host PC) is used by angel to load the kernel and ramdisk image. The serial -console is provided through the second Brutus serial port. To access it, -you may use minicom configured with /dev/ttyS1, 9600 baud, 8N1, no flow -control. - -Currently supported -=================== - - - RS232 serial ports - - audio output - - LCD screen - - keyboard - -The actual Brutus support may not be complete without extra patches. -If such patches exist, they should be found from -ftp.netwinder.org/users/n/nico. - -A full PCMCIA support is still missing, although it's possible to hack -some drivers in order to drive already inserted cards at boot time with -little modifications. - -Any contribution is welcome. - -Please send patches to nico@fluxnic.net - -Have Fun ! diff --git a/Documentation/arm/sa1100/freebird.rst b/Documentation/arm/sa1100/freebird.rst deleted file mode 100644 index 81043d0c6d64..000000000000 --- a/Documentation/arm/sa1100/freebird.rst +++ /dev/null @@ -1,25 +0,0 @@ -======== -Freebird -======== - -Freebird-1.1 is produced by Legend(C), Inc. -`http://web.archive.org/web/*/http://www.legend.com.cn` -and software/linux maintained by Coventive(C), Inc. -(http://www.coventive.com) - -Based on the Nicolas's strongarm kernel tree. - -Maintainer: - -Chester Kuo - - - - - -Author: - -- Tim wu -- CIH -- Eric Peng -- Jeff Lee -- Allen Cheng -- Tony Liu diff --git a/Documentation/arm/sa1100/graphicsclient.rst b/Documentation/arm/sa1100/graphicsclient.rst deleted file mode 100644 index a73d61c3ce91..000000000000 --- a/Documentation/arm/sa1100/graphicsclient.rst +++ /dev/null @@ -1,102 +0,0 @@ -============================================= -ADS GraphicsClient Plus Single Board Computer -============================================= - -For more details, contact Applied Data Systems or see -http://www.applieddata.net/products.html - -The original Linux support for this product has been provided by -Nicolas Pitre . Continued development work by -Woojung Huh - -It's currently possible to mount a root filesystem via NFS providing a -complete Linux environment. Otherwise a ramdisk image may be used. The -board supports MTD/JFFS, so you could also mount something on there. - -Use 'make graphicsclient_config' before any 'make config'. This will set up -defaults for GraphicsClient Plus support. - -The kernel zImage is linked to be loaded and executed at 0xc0200000. -Also the following registers should have the specified values upon entry:: - - r0 = 0 - r1 = 29 (this is the GraphicsClient architecture number) - -Linux can be used with the ADS BootLoader that ships with the -newer rev boards. See their documentation on how to load Linux. -Angel is not available for the GraphicsClient Plus AFAIK. - -There is a board known as just the GraphicsClient that ADS used to -produce but has end of lifed. This code will not work on the older -board with the ADS bootloader, but should still work with Angel, -as outlined below. In any case, if you're planning on deploying -something en masse, you should probably get the newer board. - -If using Angel on the older boards, here is a typical angel.opt option file -if the kernel is loaded through the Angel Debug Monitor:: - - base 0xc0200000 - entry 0xc0200000 - r0 0x00000000 - r1 0x0000001d - device /dev/ttyS1 - options "38400 8N1" - baud 115200 - #otherfile ramdisk.gz - #otherbase 0xc0800000 - exec minicom - -Then the kernel (and ramdisk if otherfile/otherbase lines above are -uncommented) would be loaded with:: - - angelboot -f angelboot.opt zImage - -Here it is assumed that the board is connected to ttyS1 on your PC -and that minicom is preconfigured with /dev/ttyS1, 38400 baud, 8N1, no flow -control by default. - -If any other bootloader is used, ensure it accomplish the same, especially -for r0/r1 register values before jumping into the kernel. - - -Supported peripherals -===================== - -- SA1100 LCD frame buffer (8/16bpp...sort of) -- on-board SMC 92C96 ethernet NIC -- SA1100 serial port -- flash memory access (MTD/JFFS) -- pcmcia -- touchscreen(ucb1200) -- ps/2 keyboard -- console on LCD screen -- serial ports (ttyS[0-2]) - - ttyS0 is default for serial console -- Smart I/O (ADC, keypad, digital inputs, etc) - See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation - and example user space code. ps/2 keybd is multiplexed through this driver - -To do -===== - -- UCB1200 audio with new ucb_generic layer -- everything else! :-) - -Notes -===== - -- The flash on board is divided into 3 partitions. mtd0 is where - the ADS boot ROM and zImage is stored. It's been marked as - read-only to keep you from blasting over the bootloader. :) mtd1 is - for the ramdisk.gz image. mtd2 is user flash space and can be - utilized for either JFFS or if you're feeling crazy, running ext2 - on top of it. If you're not using the ADS bootloader, you're - welcome to blast over the mtd1 partition also. - -- 16bpp mode requires a different cable than what ships with the board. - Contact ADS or look through the manual to wire your own. Currently, - if you compile with 16bit mode support and switch into a lower bpp - mode, the timing is off so the image is corrupted. This will be - fixed soon. - -Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! diff --git a/Documentation/arm/sa1100/graphicsmaster.rst b/Documentation/arm/sa1100/graphicsmaster.rst deleted file mode 100644 index e39892514f0c..000000000000 --- a/Documentation/arm/sa1100/graphicsmaster.rst +++ /dev/null @@ -1,60 +0,0 @@ -======================================== -ADS GraphicsMaster Single Board Computer -======================================== - -For more details, contact Applied Data Systems or see -http://www.applieddata.net/products.html - -The original Linux support for this product has been provided by -Nicolas Pitre . Continued development work by -Woojung Huh - -Use 'make graphicsmaster_config' before any 'make config'. -This will set up defaults for GraphicsMaster support. - -The kernel zImage is linked to be loaded and executed at 0xc0400000. - -Linux can be used with the ADS BootLoader that ships with the -newer rev boards. See their documentation on how to load Linux. - -Supported peripherals -===================== - -- SA1100 LCD frame buffer (8/16bpp...sort of) -- SA1111 USB Master -- on-board SMC 92C96 ethernet NIC -- SA1100 serial port -- flash memory access (MTD/JFFS) -- pcmcia, compact flash -- touchscreen(ucb1200) -- ps/2 keyboard -- console on LCD screen -- serial ports (ttyS[0-2]) - - ttyS0 is default for serial console -- Smart I/O (ADC, keypad, digital inputs, etc) - See http://www.eurotech-inc.com/linux-sbc.asp for IOCTL documentation - and example user space code. ps/2 keybd is multiplexed through this driver - -To do -===== - -- everything else! :-) - -Notes -===== - -- The flash on board is divided into 3 partitions. mtd0 is where - the zImage is stored. It's been marked as read-only to keep you - from blasting over the bootloader. :) mtd1 is - for the ramdisk.gz image. mtd2 is user flash space and can be - utilized for either JFFS or if you're feeling crazy, running ext2 - on top of it. If you're not using the ADS bootloader, you're - welcome to blast over the mtd1 partition also. - -- 16bpp mode requires a different cable than what ships with the board. - Contact ADS or look through the manual to wire your own. Currently, - if you compile with 16bit mode support and switch into a lower bpp - mode, the timing is off so the image is corrupted. This will be - fixed soon. - -Any contribution can be sent to nico@fluxnic.net and will be greatly welcome! diff --git a/Documentation/arm/sa1100/huw_webpanel.rst b/Documentation/arm/sa1100/huw_webpanel.rst deleted file mode 100644 index 1dc7ccb165f0..000000000000 --- a/Documentation/arm/sa1100/huw_webpanel.rst +++ /dev/null @@ -1,21 +0,0 @@ -======================= -Hoeft & Wessel Webpanel -======================= - -The HUW_WEBPANEL is a product of the german company Hoeft & Wessel AG - -If you want more information, please visit -http://www.hoeft-wessel.de - -To build the kernel:: - - make huw_webpanel_config - make oldconfig - [accept all defaults] - make zImage - -Mostly of the work is done by: -Roman Jordan jor@hoeft-wessel.de -Christoph Schulz schu@hoeft-wessel.de - -2000/12/18/ diff --git a/Documentation/arm/sa1100/index.rst b/Documentation/arm/sa1100/index.rst index 68c2a280a745..c9aed43280ff 100644 --- a/Documentation/arm/sa1100/index.rst +++ b/Documentation/arm/sa1100/index.rst @@ -7,19 +7,7 @@ Intel StrongARM 1100 .. toctree:: :maxdepth: 1 - adsbitsy assabet - brutus cerf - freebird - graphicsclient - graphicsmaster - huw_webpanel - itsy lart - nanoengine - pangolin - pleb serial_uart - tifon - yopy diff --git a/Documentation/arm/sa1100/itsy.rst b/Documentation/arm/sa1100/itsy.rst deleted file mode 100644 index f49896ba3ef1..000000000000 --- a/Documentation/arm/sa1100/itsy.rst +++ /dev/null @@ -1,47 +0,0 @@ -==== -Itsy -==== - -Itsy is a research project done by the Western Research Lab, and Systems -Research Center in Palo Alto, CA. The Itsy project is one of several -research projects at Compaq that are related to pocket computing. - -For more information, see: - - http://www.hpl.hp.com/downloads/crl/itsy/ - -Notes on initial 2.4 Itsy support (8/27/2000) : - -The port was done on an Itsy version 1.5 machine with a daughtercard with -64 Meg of DRAM and 32 Meg of Flash. The initial work includes support for -serial console (to see what you're doing). No other devices have been -enabled. - -To build, do a "make menuconfig" (or xmenuconfig) and select Itsy support. -Disable Flash and LCD support. and then do a make zImage. -Finally, you will need to cd to arch/arm/boot/tools and execute a make there -to build the params-itsy program used to boot the kernel. - -In order to install the port of 2.4 to the itsy, You will need to set the -configuration parameters in the monitor as follows:: - - Arg 1:0x08340000, Arg2: 0xC0000000, Arg3:18 (0x12), Arg4:0 - -Make sure the start-routine address is set to 0x00060000. - -Next, flash the params-itsy program to 0x00060000 ("p 1 0x00060000" in the -flash menu) Flash the kernel in arch/arm/boot/zImage into 0x08340000 -("p 1 0x00340000"). Finally flash an initial ramdisk into 0xC8000000 -("p 2 0x0") We used ramdisk-2-30.gz from the 0.11 version directory on -handhelds.org. - -The serial connection we established was at: - -8-bit data, no parity, 1 stop bit(s), 115200.00 b/s. in the monitor, in the -params-itsy program, and in the kernel itself. This can be changed, but -not easily. The monitor parameters are easily changed, the params program -setup is assembly outl's, and the kernel is a configuration item specific to -the itsy. (i.e. grep for CONFIG_SA1100_ITSY and you'll find where it is.) - - -This should get you a properly booting 2.4 kernel on the itsy. diff --git a/Documentation/arm/sa1100/nanoengine.rst b/Documentation/arm/sa1100/nanoengine.rst deleted file mode 100644 index 47f1a14cf98a..000000000000 --- a/Documentation/arm/sa1100/nanoengine.rst +++ /dev/null @@ -1,11 +0,0 @@ -========== -nanoEngine -========== - -"nanoEngine" is a SA1110 based single board computer from -Bright Star Engineering Inc. See www.brightstareng.com/arm -for more info. -(Ref: Stuart Adams ) - -Also visit Larry Doolittle's "Linux for the nanoEngine" site: -http://www.brightstareng.com/arm/nanoeng.htm diff --git a/Documentation/arm/sa1100/pangolin.rst b/Documentation/arm/sa1100/pangolin.rst deleted file mode 100644 index f0c5c1618553..000000000000 --- a/Documentation/arm/sa1100/pangolin.rst +++ /dev/null @@ -1,29 +0,0 @@ -======== -Pangolin -======== - -Pangolin is a StrongARM 1110-based evaluation platform produced -by Dialogue Technology (http://www.dialogue.com.tw/). -It has EISA slots for ease of configuration with SDRAM/Flash -memory card, USB/Serial/Audio card, Compact Flash card, -PCMCIA/IDE card and TFT-LCD card. - -To compile for Pangolin, you must issue the following commands:: - - make pangolin_config - make oldconfig - make zImage - -Supported peripherals -===================== - -- SA1110 serial port (UART1/UART2/UART3) -- flash memory access -- compact flash driver -- UDA1341 sound driver -- SA1100 LCD controller for 800x600 16bpp TFT-LCD -- MQ-200 driver for 800x600 16bpp TFT-LCD -- Penmount(touch panel) driver -- PCMCIA driver -- SMC91C94 LAN driver -- IDE driver (experimental) diff --git a/Documentation/arm/sa1100/pleb.rst b/Documentation/arm/sa1100/pleb.rst deleted file mode 100644 index d5b732967aa3..000000000000 --- a/Documentation/arm/sa1100/pleb.rst +++ /dev/null @@ -1,13 +0,0 @@ -==== -PLEB -==== - -The PLEB project was started as a student initiative at the School of -Computer Science and Engineering, University of New South Wales to make a -pocket computer capable of running the Linux Kernel. - -PLEB support has yet to be fully integrated. - -For more information, see: - - http://www.cse.unsw.edu.au diff --git a/Documentation/arm/sa1100/tifon.rst b/Documentation/arm/sa1100/tifon.rst deleted file mode 100644 index c26e910b9ea7..000000000000 --- a/Documentation/arm/sa1100/tifon.rst +++ /dev/null @@ -1,7 +0,0 @@ -===== -Tifon -===== - -More info has to come... - -Contact: Peter Danielsson diff --git a/Documentation/arm/sa1100/yopy.rst b/Documentation/arm/sa1100/yopy.rst deleted file mode 100644 index 5b35a5f61a44..000000000000 --- a/Documentation/arm/sa1100/yopy.rst +++ /dev/null @@ -1,5 +0,0 @@ -==== -Yopy -==== - -See http://www.yopydeveloper.org for more. -- cgit v1.2.3