From b6305d62234642a37fa1a68d15e741cfc3428c45 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Tue, 31 Mar 2015 18:37:12 +0100 Subject: ahci: st: Update the DT example for how to obtain the PHY. The example is wrong in that the phys property should take a phandle to the phy port. Also with the changing over to generic PHY type constants we also update that as well. Signed-off-by: Peter Griffin Acked-by: Rob Herring Acked-by: Lee Jones Signed-off-by: Tejun Heo --- Documentation/devicetree/bindings/ata/ahci-st.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings/ata') diff --git a/Documentation/devicetree/bindings/ata/ahci-st.txt b/Documentation/devicetree/bindings/ata/ahci-st.txt index 0574a77a0b9f..133120270066 100644 --- a/Documentation/devicetree/bindings/ata/ahci-st.txt +++ b/Documentation/devicetree/bindings/ata/ahci-st.txt @@ -11,7 +11,7 @@ Required properties: - reset-names : Associated names must be; "pwr-dwn" and "sw-rst" - clocks : The phandle for the clock - clock-names : Associated name must be; "ahci_clk" - - phys : The phandle for the PHY device + - phys : The phandle for the PHY port - phy-names : Associated name must be; "ahci_phy" Example: @@ -21,7 +21,7 @@ Example: reg = <0xfe380000 0x1000>; interrupts = ; interrupt-names = "hostc"; - phys = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>; + phys = <&phy_port0 PHY_TYPE_SATA>; phy-names = "ahci_phy"; resets = <&powerdown STIH416_SATA0_POWERDOWN>, <&softreset STIH416_SATA0_SOFTRESET>; -- cgit v1.2.3