From 890e48be8d8470ab7057408865069ed6f8fd2745 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Tue, 21 Aug 2018 18:42:29 +0200 Subject: dt-bindings: pinctrl: Update pinctrl-ingenic for JZ4725B and GPIO merge The pinctrl-ingenic driver now supports the JZ4725B SoC. Furthermore, the gpio-ingenic driver was dropped and the pinctrl-ingenic driver is now responsible for providing the GPIO functionality. Signed-off-by: Paul Cercueil Reviewed-by: Rob Herring Signed-off-by: Linus Walleij --- .../devicetree/bindings/gpio/ingenic,gpio.txt | 46 ---------------------- 1 file changed, 46 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/ingenic,gpio.txt (limited to 'Documentation/devicetree/bindings/gpio') diff --git a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt b/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt deleted file mode 100644 index 7988aeb725f4..000000000000 --- a/Documentation/devicetree/bindings/gpio/ingenic,gpio.txt +++ /dev/null @@ -1,46 +0,0 @@ -Ingenic jz47xx GPIO controller - -That the Ingenic GPIO driver node must be a sub-node of the Ingenic pinctrl -driver node. - -Required properties: --------------------- - - - compatible: Must contain one of: - - "ingenic,jz4740-gpio" - - "ingenic,jz4770-gpio" - - "ingenic,jz4780-gpio" - - reg: The GPIO bank number. - - interrupt-controller: Marks the device node as an interrupt controller. - - interrupts: Interrupt specifier for the controllers interrupt. - - #interrupt-cells: Should be 2. Refer to - ../interrupt-controller/interrupts.txt for more details. - - gpio-controller: Marks the device node as a GPIO controller. - - #gpio-cells: Should be 2. The first cell is the GPIO number and the second - cell specifies GPIO flags, as defined in . Only the - GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported. - - gpio-ranges: Range of pins managed by the GPIO controller. Refer to - 'gpio.txt' in this directory for more details. - -Example: --------- - -&pinctrl { - #address-cells = <1>; - #size-cells = <0>; - - gpa: gpio@0 { - compatible = "ingenic,jz4740-gpio"; - reg = <0>; - - gpio-controller; - gpio-ranges = <&pinctrl 0 0 32>; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - - interrupt-parent = <&intc>; - interrupts = <28>; - }; -}; -- cgit v1.2.3