From c7366e951469b542fa16ca94ac6d09ac2206d11a Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Thu, 11 Apr 2019 15:30:09 +0200 Subject: dt-bindings: hwmon: (pwm-fan) Add tachometer interrupt This adds the tachometer interrupt to the pwm-fan binding, which is necessary for RPM support. Signed-off-by: Stefan Wahren Reviewed-by: Rob Herring Reviewed-by: Robin Murphy Signed-off-by: Guenter Roeck --- Documentation/devicetree/bindings/hwmon/pwm-fan.txt | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) (limited to 'Documentation/devicetree/bindings/hwmon') diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt index 49ca5d83ed13..6ced829b0e58 100644 --- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -7,7 +7,16 @@ Required properties: which correspond to thermal cooling states Optional properties: -- fan-supply : phandle to the regulator that provides power to the fan +- fan-supply : phandle to the regulator that provides power to the fan +- interrupts : This contains a single interrupt specifier which + describes the tachometer output of the fan as an + interrupt source. The output signal must generate a + defined number of interrupts per fan revolution, which + require that it must be self resetting edge interrupts. + See interrupt-controller/interrupts.txt for the format. +- pulses-per-revolution : define the tachometer pulses per fan revolution as + an integer (default is 2 interrupts per revolution). + The value must be greater than zero. Example: fan0: pwm-fan { @@ -38,3 +47,13 @@ Example: }; }; }; + +Example 2: + fan0: pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 40000 0>; + fan-supply = <®_fan>; + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + pulses-per-revolution = <2>; + }; -- cgit v1.2.3