From 86335b51e47d9b5065abf0e5fc438234e53ffe86 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 26 May 2021 13:48:38 -0500 Subject: dt-bindings: i2c: i2c-mux-pca954x: Convert to DT schema Convert the i2c-mux-pca954x binding to DT schema format. Add the missing compatible for 'nxp,pca9645' which is already in use. Reviewed-by: Laurent Pinchart Acked-by: Wolfram Sang Acked-by: Peter Rosin Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20210526184839.2937899-6-robh@kernel.org --- .../devicetree/bindings/i2c/i2c-mux-pca954x.txt | 74 -------------- .../devicetree/bindings/i2c/i2c-mux-pca954x.yaml | 110 +++++++++++++++++++++ 2 files changed, 110 insertions(+), 74 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml (limited to 'Documentation/devicetree/bindings/i2c') diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt deleted file mode 100644 index 9f3f3eb67e87..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt +++ /dev/null @@ -1,74 +0,0 @@ -* NXP PCA954x I2C bus switch - -The driver supports NXP PCA954x and PCA984x I2C mux/switch devices. - -Required Properties: - - - compatible: Must contain one of the following. - "nxp,pca9540", - "nxp,pca9542", - "nxp,pca9543", - "nxp,pca9544", - "nxp,pca9545", - "nxp,pca9546", "nxp,pca9846", - "nxp,pca9547", "nxp,pca9847", - "nxp,pca9548", "nxp,pca9848", - "nxp,pca9849" - - - reg: The I2C address of the device. - - The following required properties are defined externally: - - - Standard I2C mux properties. See i2c-mux.txt in this directory. - - I2C child bus nodes. See i2c-mux.txt in this directory. - -Optional Properties: - - - reset-gpios: Reference to the GPIO connected to the reset input. - - idle-state: if present, overrides i2c-mux-idle-disconnect, - Please refer to Documentation/devicetree/bindings/mux/mux-controller.yaml - - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all - children in idle state. This is necessary for example, if there are several - multiplexers on the bus and the devices behind them use same I2C addresses. - - interrupts: Interrupt mapping for IRQ. - - interrupt-controller: Marks the device node as an interrupt controller. - - #interrupt-cells : Should be two. - - first cell is the pin number - - second cell is used to specify flags. - See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example: - - i2c-switch@74 { - compatible = "nxp,pca9548"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x74>; - - interrupt-parent = <&ipic>; - interrupts = <17 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <2>; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <2>; - - eeprom@54 { - compatible = "atmel,24c08"; - reg = <0x54>; - }; - }; - - i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - - rtc@51 { - compatible = "nxp,pcf8563"; - reg = <0x51>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml new file mode 100644 index 000000000000..9f1726d0356b --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-pca954x.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PCA954x I2C bus switch + +maintainers: + - Laurent Pinchart + +description: + The binding supports NXP PCA954x and PCA984x I2C mux/switch devices. + +allOf: + - $ref: /schemas/i2c/i2c-mux.yaml# + +properties: + compatible: + oneOf: + - enum: + - nxp,pca9540 + - nxp,pca9542 + - nxp,pca9543 + - nxp,pca9544 + - nxp,pca9545 + - nxp,pca9546 + - nxp,pca9547 + - nxp,pca9548 + - nxp,pca9846 + - nxp,pca9847 + - nxp,pca9848 + - nxp,pca9849 + - items: + - const: nxp,pca9646 + - const: nxp,pca9546 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#interrupt-cells": + const: 2 + + interrupt-controller: true + + reset-gpios: + maxItems: 1 + + i2c-mux-idle-disconnect: + type: boolean + description: Forces mux to disconnect all children in idle state. This is + necessary for example, if there are several multiplexers on the bus and + the devices behind them use same I2C addresses. + + idle-state: + description: if present, overrides i2c-mux-idle-disconnect + $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + interrupt-parent = <&ipic>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@54 { + compatible = "atmel,24c08"; + reg = <0x54>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + }; +... -- cgit v1.2.3