From 337600fbeeb70e9ec052ca5fe0a09047c70649be Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Mon, 14 Dec 2015 14:53:48 +0100 Subject: iio: Add binding documentation for imx25 GCQ The documentation describes the bindings for the imx25 GCQ unit which is essentially a generic conversion queue using the imx25 ADC. Signed-off-by: Markus Pargmann Acked-by: Rob Herring Acked-by: Jonathan Cameron Signed-off-by: Lee Jones --- .../devicetree/bindings/iio/adc/fsl,imx25-gcq.txt | 58 ++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt (limited to 'Documentation/devicetree/bindings/iio') diff --git a/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt new file mode 100644 index 000000000000..b0866d36a307 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/fsl,imx25-gcq.txt @@ -0,0 +1,58 @@ +Freescale i.MX25 ADC GCQ device + +This is a generic conversion queue device that can convert any of the +analog inputs using the ADC unit of the i.MX25. + +Required properties: + - compatible: Should be "fsl,imx25-gcq". + - reg: Should be the register range of the module. + - interrupts: Should be the interrupt number of the module. + Typically this is <1>. + - interrupt-parent: phandle to the tsadc module of the i.MX25. + - #address-cells: Should be <1> (setting for the subnodes) + - #size-cells: Should be <0> (setting for the subnodes) + +Optional properties: + - vref-ext-supply: The regulator supplying the ADC reference voltage. + Required when at least one subnode uses the this reference. + - vref-xp-supply: The regulator supplying the ADC reference voltage on pin XP. + Required when at least one subnode uses this reference. + - vref-yp-supply: The regulator supplying the ADC reference voltage on pin YP. + Required when at least one subnode uses this reference. + +Sub-nodes: +Optionally you can define subnodes which define the reference voltage +for the analog inputs. + +Required properties for subnodes: + - reg: Should be the number of the analog input. + 0: xp + 1: yp + 2: xn + 3: yn + 4: wiper + 5: inaux0 + 6: inaux1 + 7: inaux2 +Optional properties for subnodes: + - fsl,adc-refp: specifies the positive reference input as defined in + + - fsl,adc-refn: specifies the negative reference input as defined in + + +Example: + + adc: adc@50030800 { + compatible = "fsl,imx25-gcq"; + reg = <0x50030800 0x60>; + interrupt-parent = <&tscadc>; + interrupts = <1>; + #address-cells = <1>; + #size-cells = <0>; + + inaux@5 { + reg = <5>; + fsl,adc-refp = ; + fsl,adc-refn = ; + }; + }; -- cgit v1.2.3