From 292d6240a6e63d0e58370e38f19a1813ed79acbc Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Fri, 21 Dec 2018 14:46:35 +0100 Subject: iio: adc: add STMPE ADC devicetree bindings This adds the devicetree bindings for the STMPE ADC. This also corrects a typo in st,sample-time it is rather "6 -> 124 clocks" according to the datasheet and not 144. We need to use the naming stmpe_adc in devicetree because this is given by the mfd device. Signed-off-by: Stefan Agner Signed-off-by: Max Krummenacher Signed-off-by: Philippe Schenker Reviewed-by: Jonathan Cameron Reviewed-by: Rob Herring Signed-off-by: Lee Jones (cherry-picked from commit 81cdab79818988d27d8aeb162b7988c9e6dde936) --- .../bindings/input/touchscreen/stmpe.txt | 88 ++++++++++++++++------ 1 file changed, 63 insertions(+), 25 deletions(-) (limited to 'Documentation/devicetree/bindings/input/touchscreen/stmpe.txt') diff --git a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt index bf66a55a7de5..c549924603d2 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/stmpe.txt @@ -5,24 +5,6 @@ Required properties: - compatible: "st,stmpe-ts" Optional properties: -- st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks - 1 -> 44 clocks - 2 -> 56 clocks - 3 -> 64 clocks - 4 -> 80 clocks (recommended) - 5 -> 96 clocks - 6 -> 144 clocks -- st,mod-12b : ADC Bit mode - 0 -> 10bit ADC - 1 -> 12bit ADC -- st,ref-sel : ADC reference source - 0 -> internal - 1 -> external -- st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz - 1 -> 3.25 MHz - 2 || 3 -> 6.5 MHz - st,ave-ctrl : Sample average control 0 -> 1 sample 1 -> 2 samples @@ -52,20 +34,76 @@ Optional properties: 0 -> 20 mA (typical 35mA max) 1 -> 50 mA (typical 80 mA max) +Optional properties common with MFD (deprecated): + - st,sample-time : ADC conversion time in number of clock. + 0 -> 36 clocks + 1 -> 44 clocks + 2 -> 56 clocks + 3 -> 64 clocks + 4 -> 80 clocks (recommended) + 5 -> 96 clocks + 6 -> 124 clocks + - st,mod-12b : ADC Bit mode + 0 -> 10bit ADC + 1 -> 12bit ADC + - st,ref-sel : ADC reference source + 0 -> internal + 1 -> external + - st,adc-freq : ADC Clock speed + 0 -> 1.625 MHz + 1 -> 3.25 MHz + 2 || 3 -> 6.5 MHz + Node name must be stmpe_touchscreen and should be child node of stmpe node to which it belongs. +Note that common ADC settings of stmpe_touchscreen (child) will take precedence +over the settings done in MFD. + Example: +stmpe811@41 { + compatible = "st,stmpe811"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch_int>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio4>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + /* Common ADC settings */ + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + stmpe_touchscreen { compatible = "st,stmpe-ts"; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <1>; - st,touch-det-delay = <2>; - st,settling = <2>; + reg = <0>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 7 length fractional part in z */ st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ st,i-drive = <1>; }; + stmpe_adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0F>; + }; +}; -- cgit v1.2.3