From e687abfe9dc1ea7fc7a51258e3da76d06851b64d Mon Sep 17 00:00:00 2001 From: Sangwon Jee Date: Fri, 7 Oct 2016 16:19:33 -0700 Subject: Input: melfas_mip4 - add devicetree binding documentations Add devicetree binding documentations. Signed-off-by: Sangwon Jee Signed-off-by: Dmitry Torokhov --- .../bindings/input/touchscreen/melfas_mip4.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt (limited to 'Documentation/devicetree/bindings/input') diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt new file mode 100644 index 000000000000..7b8944c2cb31 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas_mip4.txt @@ -0,0 +1,21 @@ +* MELFAS MIP4 Touchscreen + +Required properties: +- compatible: must be "melfas,mip4_ts" +- reg: I2C slave address of the chip (0x48 or 0x34) +- interrupt-parent: interrupt controller to which the chip is connected +- interrupts: interrupt to which the chip is connected + +Optional properties: +- ce-gpios: GPIO connected to the CE (chip enable) pin of the chip + +Example: + i2c@00000000 { + touchscreen: melfas_mip4@48 { + compatible = "melfas,mip4_ts"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + ce-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + }; -- cgit v1.2.3