From 74b5150cde45ab29ee332a3d1e770c00431f7993 Mon Sep 17 00:00:00 2001 From: Talel Shenhar Date: Mon, 10 Jun 2019 11:34:42 +0300 Subject: dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC Document Amazon's Annapurna Labs Fabric Interrupt Controller SoC binding. Signed-off-by: Talel Shenhar Signed-off-by: Marc Zyngier --- .../interrupt-controller/amazon,al-fic.txt | 29 ++++++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt (limited to 'Documentation/devicetree/bindings/interrupt-controller') diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt new file mode 100644 index 000000000000..4e82fd575cec --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt @@ -0,0 +1,29 @@ +Amazon's Annapurna Labs Fabric Interrupt Controller + +Required properties: + +- compatible: should be "amazon,al-fic" +- reg: physical base address and size of the registers +- interrupt-controller: identifies the node as an interrupt controller +- #interrupt-cells: must be 2. + First cell defines the index of the interrupt within the controller. + Second cell is used to specify the trigger type and must be one of the + following: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 4 = active high level-sensitive +- interrupt-parent: specifies the parent interrupt controller. +- interrupts: describes which input line in the interrupt parent, this + fic's output is connected to. This field property depends on the parent's + binding + +Example: + +amazon_fic: interrupt-controller@0xfd8a8500 { + compatible = "amazon,al-fic"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x0 0xfd8a8500 0x0 0x1000>; + interrupt-parent = <&gic>; + interrupts = ; +}; -- cgit v1.2.3