From f1518cd84b44d6c28fb40e0551a9785bc38f55af Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Tue, 4 Dec 2018 11:52:12 +0530 Subject: dt-bindings: arm-smmu: Add bindings for qcom,smmu-v2 Add bindings doc for Qcom's smmu-v2 implementation. Signed-off-by: Vivek Gautam Reviewed-by: Tomasz Figa Tested-by: Srinivas Kandagatla Reviewed-by: Rob Herring Reviewed-by: Robin Murphy Signed-off-by: Will Deacon --- .../devicetree/bindings/iommu/arm,smmu.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'Documentation/devicetree/bindings/iommu') diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt index 8a6ffce12af5..a6504b37cc21 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt @@ -17,10 +17,16 @@ conditions. "arm,mmu-401" "arm,mmu-500" "cavium,smmu-v2" + "qcom,smmu-v2" depending on the particular implementation and/or the version of the architecture implemented. + Qcom SoCs must contain, as below, SoC-specific compatibles + along with "qcom,smmu-v2": + "qcom,msm8996-smmu-v2", "qcom,smmu-v2", + "qcom,sdm845-smmu-v2", "qcom,smmu-v2". + - reg : Base address and size of the SMMU. - #global-interrupts : The number of global interrupts exposed by the @@ -71,6 +77,22 @@ conditions. or using stream matching with #iommu-cells = <2>, and may be ignored if present in such cases. +- clock-names: List of the names of clocks input to the device. The + required list depends on particular implementation and + is as follows: + - for "qcom,smmu-v2": + - "bus": clock required for downstream bus access and + for the smmu ptw, + - "iface": clock required to access smmu's registers + through the TCU's programming interface. + - unspecified for other implementations. + +- clocks: Specifiers for all clocks listed in the clock-names property, + as per generic clock bindings. + +- power-domains: Specifiers for power domains required to be powered on for + the SMMU to operate, as per generic power domain bindings. + ** Deprecated properties: - mmu-masters (deprecated in favour of the generic "iommus" binding) : @@ -137,3 +159,20 @@ conditions. iommu-map = <0 &smmu3 0 0x400>; ... }; + + /* Qcom's arm,smmu-v2 implementation */ + smmu4: iommu@d00000 { + compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2"; + reg = <0xd00000 0x10000>; + + #global-interrupts = <1>; + interrupts = , + , + ; + #iommu-cells = <1>; + power-domains = <&mmcc MDSS_GDSC>; + + clocks = <&mmcc SMMU_MDP_AXI_CLK>, + <&mmcc SMMU_MDP_AHB_CLK>; + clock-names = "bus", "iface"; + }; -- cgit v1.2.3