From 915236838988a927e405058a86b7857a984d33d4 Mon Sep 17 00:00:00 2001 From: Dan Murphy Date: Mon, 18 Dec 2017 14:23:03 -0600 Subject: dt: bindings: lp8860: Update DT label binding Update the lp8860 label binding to the LED standard as documented in Documentation/devicetree/bindings/leds/common.txt Signed-off-by: Dan Murphy Reviewed-by: Rob Herring Signed-off-by: Jacek Anaszewski --- Documentation/devicetree/bindings/leds/leds-lp8860.txt | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'Documentation/devicetree/bindings/leds') diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt index b9d09acbaa73..77ddd22c20dc 100644 --- a/Documentation/devicetree/bindings/leds/leds-lp8860.txt +++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt @@ -9,20 +9,33 @@ Required properties: - compatible : "ti,lp8860" - reg : I2C slave address - - label : Used for naming LEDs + - #address-cells : 1 + - #size-cells : 0 Optional properties: - enable-gpios : gpio pin to enable (active high)/disable the device. - vled-supply : LED supply +Required child properties: + - reg : 0 + +Optional child properties: + - label : see Documentation/devicetree/bindings/leds/common.txt + Example: led-controller@2d { compatible = "ti,lp8860"; + #address-cells = <1>; + #size-cells = <0>; reg = <0x2d>; - label = "display_cluster"; enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; vled-supply = <&vbatt>; + + led@0 { + reg = <0>; + label = "white:backlight"; + }; } For more product information please see the link below: -- cgit v1.2.3