From d60a3d30c2858872ba97093689a741f1966b4b00 Mon Sep 17 00:00:00 2001 From: Jacek Anaszewski Date: Sun, 9 Jun 2019 20:19:04 +0200 Subject: dt-bindings: aat1290: Add function and color properties Refer to new "function" and "color" properties and mark "label" as deprecated. Signed-off-by: Jacek Anaszewski Reviewed-by: Rob Herring --- Documentation/devicetree/bindings/leds/leds-aat1290.txt | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'Documentation/devicetree/bindings/leds') diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt index 85c0c58617f6..62ed17ec075b 100644 --- a/Documentation/devicetree/bindings/leds/leds-aat1290.txt +++ b/Documentation/devicetree/bindings/leds/leds-aat1290.txt @@ -32,15 +32,18 @@ Required properties of the LED child node: formula: T = 8.82 * 10^9 * Ct. Optional properties of the LED child node: -- label : see Documentation/devicetree/bindings/leds/common.txt +- function : see Documentation/devicetree/bindings/leds/common.txt +- color : see Documentation/devicetree/bindings/leds/common.txt +- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated) Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with a switch that allows for routing strobe signal either from the host or from the camera sensor): #include "exynos4412.dtsi" +#include -aat1290 { +led-controller { compatible = "skyworks,aat1290"; flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>; enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>; @@ -50,8 +53,9 @@ aat1290 { pinctrl-1 = <&camera_flash_host>; pinctrl-2 = <&camera_flash_isp>; - camera_flash: flash-led { - label = "aat1290-flash"; + camera_flash: led { + function = LED_FUNCTION_FLASH; + color = ; led-max-microamp = <520833>; flash-max-microamp = <1012500>; flash-max-timeout-us = <1940000>; -- cgit v1.2.3