From ef4db28c1f45cda6989bc8a8e45294894786d947 Mon Sep 17 00:00:00 2001 From: Brian Masney Date: Mon, 20 May 2019 04:58:46 -0400 Subject: dt-bindings: backlight: lm3630a: correct schema validation The '#address-cells' and '#size-cells' properties were not defined in the lm3630a bindings and would cause the following error when attempting to validate the examples against the schema: Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: '#address-cells', '#size-cells' do not match any of the regexes: '^led@[01]$', 'pinctrl-[0-9]+' Correct this by adding those two properties. While we're here, move the ti,linear-mapping-mode property to the led@[01] child nodes to correct the following validation error: Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.example.dt.yaml: led@0: 'ti,linear-mapping-mode' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: 32fcb75c66a0 ("dt-bindings: backlight: Add lm3630a bindings") Signed-off-by: Brian Masney Reported-by: Rob Herring Acked-by: Daniel Thompson Acked-by: Dan Murphy [robh: also drop maxItems from child reg] Signed-off-by: Rob Herring --- .../bindings/leds/backlight/lm3630a-backlight.yaml | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'Documentation/devicetree/bindings/leds') diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml index 4d61fe0a98a4..dc129d9a329e 100644 --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml @@ -23,16 +23,17 @@ properties: reg: maxItems: 1 - ti,linear-mapping-mode: - description: | - Enable linear mapping mode. If disabled, then it will use exponential - mapping mode in which the ramp up/down appears to have a more uniform - transition to the human eye. - type: boolean + '#address-cells': + const: 1 + + '#size-cells': + const: 0 required: - compatible - reg + - '#address-cells' + - '#size-cells' patternProperties: "^led@[01]$": @@ -48,7 +49,6 @@ patternProperties: in this property. The two current sinks can be controlled independently with both banks, or bank A can be configured to control both sinks with the led-sources property. - maxItems: 1 minimum: 0 maximum: 1 @@ -73,6 +73,13 @@ patternProperties: minimum: 0 maximum: 255 + ti,linear-mapping-mode: + description: | + Enable linear mapping mode. If disabled, then it will use exponential + mapping mode in which the ramp up/down appears to have a more uniform + transition to the human eye. + type: boolean + required: - reg -- cgit v1.2.3